- R - Static variable in class nxopen.annotations.RadiusSymbol
-
Specifies R symbol
- R - Static variable in class nxopen.annotations.SearchCriteriaDimensionBuilder.RadialSymbolOptions
-
R
- R - Static variable in class nxopen.cam.TurnToolBuilder.HolderStyles
-
R-Style
- R - Static variable in class nxopen.mechatronics.ExternalConnectionElementBuilder.StreamType
-
read
- r - Variable in class nxopen.NXColor.Rgb
-
red value
- R12 - Static variable in class nxopen.DxfdwgCreator.AutoCADRevisionOptions
-
output autocad version R12
- R12 - Static variable in class nxopen.features.sheetmetal.ExportFlatPatternBuilder.DxfRevisionType
-
- R13 - Static variable in class nxopen.DxfdwgCreator.AutoCADRevisionOptions
-
output autocad version R13
- R13 - Static variable in class nxopen.features.sheetmetal.ExportFlatPatternBuilder.DxfRevisionType
-
- R14 - Static variable in class nxopen.DxfdwgCreator.AutoCADRevisionOptions
-
output autocad version R14
- R14 - Static variable in class nxopen.features.sheetmetal.ExportFlatPatternBuilder.DxfRevisionType
-
- R18 - Static variable in class nxopen.AcisExporter.AcisVersionOption
-
- R19 - Static variable in class nxopen.AcisExporter.AcisVersionOption
-
- r1ToolTipJunction - Variable in class nxopen.cam.ManageToolPartBuilder.AskR1ToolTipJunctionData
-
The Tool Tip Junction at radius R1
- r1ToolTipTrackingPoint - Variable in class nxopen.cam.ManageToolPartBuilder.AskR1ToolTipJunctionData
-
The tracking point (1..9) where the junction origin is located
- R20 - Static variable in class nxopen.AcisExporter.AcisVersionOption
-
- R2000 - Static variable in class nxopen.DxfdwgCreator.AutoCADRevisionOptions
-
output autocad version 2000
- R2000 - Static variable in class nxopen.features.sheetmetal.ExportFlatPatternBuilder.DxfRevisionType
-
- R2004 - Static variable in class nxopen.DxfdwgCreator.AutoCADRevisionOptions
-
output autocad version 2004
- R2004 - Static variable in class nxopen.features.sheetmetal.ExportFlatPatternBuilder.DxfRevisionType
-
- R2005 - Static variable in class nxopen.DxfdwgCreator.AutoCADRevisionOptions
-
output autocad version 2005
- R2005 - Static variable in class nxopen.features.sheetmetal.ExportFlatPatternBuilder.DxfRevisionType
-
- R2007 - Static variable in class nxopen.DxfdwgCreator.AutoCADRevisionOptions
-
output autocad version 2007
- R2007 - Static variable in class nxopen.features.sheetmetal.ExportFlatPatternBuilder.DxfRevisionType
-
- R2010 - Static variable in class nxopen.DxfdwgCreator.AutoCADRevisionOptions
-
output autocad version 2010
- R20102012 - Static variable in class nxopen.features.sheetmetal.ExportFlatPatternBuilder.DxfRevisionType
-
- R2013 - Static variable in class nxopen.DxfdwgCreator.AutoCADRevisionOptions
-
output autocad version 2013
- R20132016 - Static variable in class nxopen.features.sheetmetal.ExportFlatPatternBuilder.DxfRevisionType
-
- R21 - Static variable in class nxopen.AcisExporter.AcisVersionOption
-
- R22 - Static variable in class nxopen.AcisExporter.AcisVersionOption
-
- R23 - Static variable in class nxopen.AcisExporter.AcisVersionOption
-
- R24 - Static variable in class nxopen.AcisExporter.AcisVersionOption
-
- R25 - Static variable in class nxopen.AcisExporter.AcisVersionOption
-
- R26 - Static variable in class nxopen.AcisExporter.AcisVersionOption
-
- ra4 - Variable in class nxopen.uf.UFUi.GetInputDoublesData
-
- ra5 - Variable in class nxopen.uf.UFUi.GetInputNumbersData
-
- ra5 - Variable in class nxopen.uf.UFUi.GetInputValuesData
-
- RACK_AND_PINION_COUPLER - Static variable in class nxopen.uf.UFMotion.JointCouplerType
-
- RACK_PINION - Static variable in class nxopen.positioning.Constraint.Type
-
For internal use only
- RackPinion - Interface in nxopen.mechatronics
-
Represents the Rack and Pinion.
- RackPinionBuilder - Interface in nxopen.mechatronics
-
- RackPinionCollection - Interface in nxopen.mechatronics
-
Represents a collection of RackPinion.
- rackPinions() - Method in interface nxopen.mechatronics.PhysicsManager
-
- RAD - Static variable in class nxopen.annotations.RadiusSymbol
-
Specfies RAD symbol
- RAD - Static variable in class nxopen.annotations.SearchCriteriaDimensionBuilder.RadialSymbolOptions
-
RAD
- RAD_DIA_TEXT - Static variable in class nxopen.uf.UFDrf.TextType
-
- radCutMethod() - Method in interface nxopen.cam.DmRadBuilder
-
Returns the Radial Cut/Cut Method
License requirements: None.
- radData - Variable in class nxopen.uf.UFModeling.AskFaceData
-
- RADEG - Static variable in class nxopen.uf.UFConstants
-
- RADIAL - Static variable in class nxopen.annotations.DimensionMeasurementBuilder.MeasurementMethod
-
Radial measurement type
- RADIAL - Static variable in class nxopen.annotations.SearchCriteriaDimensionBuilder.DimensionTypes
-
Radial
- RADIAL - Static variable in class nxopen.cae.ElementExtrudeBuilder.MethodType
-
along radial direction
- RADIAL - Static variable in class nxopen.cam.InspectionConstructedFeatureBuilder.DirectionType
-
Use a radial direction vector
- RADIAL - Static variable in class nxopen.cam.InspectionMethodBuilder.PolarSequenceDirectionTypes
-
Order by radial direction
- RADIAL - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.ParamTolZoneShape
-
Radial
- RADIAL - Static variable in class nxopen.cam.RoughFinishTurningBuilder.MinmaxSizeModes
-
Radial
- RADIAL - Static variable in class nxopen.cam.TeachmodeLinearMoveBuilder.MoveTypes
-
Radial only
- RADIAL - Static variable in class nxopen.cam.TrimPlane.Content
-
radial
- RADIAL - Static variable in class nxopen.cam.TurnMoveToPointBuilder.DirectionTypes
-
radial
- RADIAL - Static variable in class nxopen.cam.TurnProbeInspectPointMoveBuilder.DirectionTypes
-
Radial
- radial() - Method in interface nxopen.cam.TurnStock
-
Returns the radial stock
License requirements: None.
- RADIAL - Static variable in class nxopen.features.SectionCurveBuilder.PlaneType
-
Set of planes radiating from a base plane
- RADIAL - Static variable in class nxopen.geometricanalysis.sectionanalysis.SectionAnalysisExBuilder.AlignmentType
-
The cutting planes are distributed along a circle
- radial() - Method in interface nxopen.geometricanalysis.sectionanalysis.SectionAnalysisExBuilder
-
Returns the Radial section specification.
- radial() - Method in interface nxopen.sim.KinematicChain
-
Returns the radial axis of the kinematic chain
License requirements: None.
- RADIAL - Static variable in class nxopen.tooling.LayoutBuilder.LayoutSubType
-
Radial circular type
- RADIAL_AXIAL - Static variable in class nxopen.cam.NcmTurnThreadBuilder.LocalReturnTypes
-
Radial-Axial
- RADIAL_AXIAL - Static variable in class nxopen.cam.ProbeProtectedParametersBuilder.AppMethodTypes
-
radial and then axial
- RADIAL_AXIAL - Static variable in class nxopen.cam.TeachmodeLinearMoveBuilder.MoveTypes
-
Radial then Axial
- RADIAL_AXIAL - Static variable in class nxopen.cam.TurnMoveToPointBuilder.DirectionTypes
-
radial axial
- RADIAL_AXIAL - Static variable in class nxopen.cam.TurnRoughFinishLocalReturnBuilder.ReturnMoveModeTypes
-
Return Move: Radial-Axial
- RADIAL_AXIAL - Static variable in class nxopen.cam.TurnRoughFinishTestCut.ReturnMoveTypes
-
Test Cut Return Move: Radial -> Axial
- RADIAL_AXIAL_RADIAL - Static variable in class nxopen.cam.NcmTurnThreadBuilder.LocalReturnTypes
-
Radial-Axial-Radial
- RADIAL_AXIAL_RADIAL - Static variable in class nxopen.cam.TurnRoughFinishLocalReturnBuilder.ReturnMoveModeTypes
-
Return Move: Radial-Axial-Radial
- RADIAL_AXIAL_WITH_CLEARANCE - Static variable in class nxopen.cam.ProbeProtectedParametersBuilder.AppMethodTypes
-
radial and then axial from/to clearance
- RADIAL_AXIS - Static variable in class nxopen.cam.TurnOrientWcs.XcMappingTypes
-
Map XC to XM or YM of the MCS
- RADIAL_AXIS - Static variable in class nxopen.cam.TurnOrientWcs.YcMappingTypes
-
Map YC to XM or YM of the MCS
- RADIAL_CLEAR_AXIAL - Static variable in class nxopen.cam.NcmTurnThreadBuilder.LocalReturnTypes
-
Radial-Clear Axial
- RADIAL_CLEAR_AXIAL - Static variable in class nxopen.cam.TurnRoughFinishLocalReturnBuilder.ReturnMoveModeTypes
-
Return Move: Radial-Clear Axial
- RADIAL_CLEAR_AXIAL_DIRECT - Static variable in class nxopen.cam.NcmTurnThreadBuilder.LocalReturnTypes
-
Radial-Clear Axial-Direct
- RADIAL_CLEAR_AXIAL_DIRECT - Static variable in class nxopen.cam.TurnRoughFinishLocalReturnBuilder.ReturnMoveModeTypes
-
Return Move: Radial-Clear Axial-Direct
- RADIAL_CUT - Static variable in class nxopen.cam.SurfaceContourBuilder.DriveMethodTypes
-
Radial Cut
- RADIAL_DIR - Static variable in class nxopen.geometricutilities.PatternOrientation.ProjDirEnum
-
project along radial direction.
- RADIAL_DISTANCE - Static variable in class nxopen.GenericMeasure.Type
-
- RADIAL_DISTANCE - Static variable in class nxopen.geometricutilities.ModlMotion.Options
-
Move by Radial Distance
- RADIAL_LINES - Static variable in class nxopen.cam.DmAmBuilder.AmCutPatternTypes
-
Radial Lines
- RADIAL_LINES - Static variable in class nxopen.cam.DmBndBuilder.BndCutPatternTypes
-
Radial Lines
- RADIAL_PATTERN - Static variable in class nxopen.uf.UFGdt.PatternType
-
- RADIAL_SIZE - Static variable in class nxopen.uf.UFGdt.SizeValueType
-
- RADIAL_THEN_AXIAL - Static variable in class nxopen.cam.TurnAvoidanceGohomeBuilder.GohomePointMotionTypes
-
Motion type: Radial then axial to point.
- RADIAL_THEN_AXIAL - Static variable in class nxopen.cam.TurnAvoidancePathPointsBuilder.MotionTypes
-
Motion to Point: Radial then Axial
- RADIAL_THEN_AXIAL - Static variable in class nxopen.cam.TurnAvoidanceReturnBuilder.ReturnPointMotionTypes
-
Motion type: Radial then axial to point.
- RADIAL_THEN_AXIAL - Static variable in class nxopen.cam.TurnAvoidanceStartBuilder.StartPointMotionTypes
-
Motion type: Radial then axial to point.
- RADIAL_THEN_AXIAL - Static variable in class nxopen.cam.TurnAvoidanceStartOfEngageBuilder.StartOfEngageMotionTypes
-
Motion type: Radial then axial to start of engage.
- RADIAL_ZIG - Static variable in class nxopen.cam.CutPatternBuilder.Types
-
Radial Zig
- RADIAL_ZIG_WITH_CONTOUR - Static variable in class nxopen.cam.CutPatternBuilder.Types
-
Radial Zig with Contour
- RADIAL_ZIG_WITH_STEPOVER - Static variable in class nxopen.cam.CutPatternBuilder.Types
-
Radial Zig with Stepover
- RADIAL_ZIG_ZAG - Static variable in class nxopen.cam.CutPatternBuilder.Types
-
Radial Zig Zag
- RADIAL_ZIG_ZAG_WITH_LIFTS - Static variable in class nxopen.cam.CutPatternBuilder.Types
-
Radial Zig Zag with Lifts
- radialAxis() - Method in interface nxopen.geometricutilities.ModlMotion
-
- RadialBuilder - Interface in nxopen.geometricanalysis.sectionanalysis
-
- RadialBuilder.RotationAxisType - Class in nxopen.geometricanalysis.sectionanalysis
-
The type of the rotation axis
- radialCoordinate() - Method in interface nxopen.cam.FirstPlunge
-
Returns the radial coordinate
License requirements: None.
- radialCoordinate() - Method in interface nxopen.cam.InitialProfilePlunge
-
Returns the radial coordinate
License requirements: None.
- radialCurveProfile() - Method in interface nxopen.motion.BushingCylindricalCoefficientsComponent
-
Returns the radial curve profile.
- radialCurveProfile() - Method in interface nxopen.motion.BushingSphericalCoefficientsComponent
-
Returns the radial curve profile.
- radialDamping - Variable in class nxopen.uf.UFMotion.CylindricalBushing
-
- radialData - Variable in class nxopen.uf.UFCurve.SectionAskRadialData
-
- radialDelta() - Method in interface nxopen.geometricutilities.PatternClocking
-
- radialDelta() - Method in interface nxopen.geometricutilities.PatternClockingBuilder
-
Returns the radial delta for circular clocking
License requirements: None.
- RadialDimension - Interface in nxopen.features
-
Represents a radial dimension feature
To create or edit an instance of this class, use
RadialDimensionBuilder
Created in NX6.0.0
- RadialDimensionBuilder - Interface in nxopen.annotations
-
- RadialDimensionBuilder - Interface in nxopen.features
-
- RadialDimensionBuilder.ValueOption - Class in nxopen.features
-
the option for radius or diameter
- radialDistance() - Method in interface nxopen.cam.BoundaryTurnMemberOffset
-
Returns the offset radial distance
License requirements: None.
- radialDistance() - Method in interface nxopen.geometricutilities.ModlMotion
-
- radialEndAngle() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
Returns the expression containing the radial angle at which the envelope body will end.
- radialEngage() - Method in interface nxopen.cam.ThreadedHoleSet
-
Returns the Radial Engage
License requirements: None.
- radialEngageOption() - Method in interface nxopen.features.HolePackageBuilder
-
Returns the radial engage option - this is applicable for screw clearence hole
License requirements: None.
- radialEngageOption() - Method in interface nxopen.geometricutilities.EndHoleData
-
Returns the radial engage option
License requirements: None.
- radialExpression() - Method in interface nxopen.motion.BushingCylindricalCoefficientsComponent
-
- radialExpression() - Method in interface nxopen.motion.BushingSphericalCoefficientsComponent
-
Returns the radial expression type
License requirements: None.
- radialFunction() - Method in interface nxopen.motion.BushingCylindricalCoefficientsComponent
-
- radialFunction() - Method in interface nxopen.motion.BushingSphericalCoefficientsComponent
-
Returns the radial function type
License requirements: None.
- radialGridSize - Variable in class nxopen.preferences.WorkPlane.PolarGridSize
-
Radial grid circle parameters
- RadialGrooveMilling - Interface in nxopen.cam
-
Represents a Radial Groove Milling Operation
To create or edit an instance of this class, use
RadialGrooveMillingBuilder
Created in NX9.0.3
- RadialGrooveMillingBuilder - Interface in nxopen.cam
-
- radialMeasurePoint() - Method in interface nxopen.geometricutilities.ModlMotion
-
- radialOffset() - Method in interface nxopen.features.ToolingBoxBuilder
-
Returns the radial offset value for cylinder box
License requirements: None.
- radialOffset() - Method in interface nxopen.tooling.DieInsertBuilder
-
Returns the radial offset value for cylinder box
License requirements: None.
- radialOffset() - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder
-
Returns the radial offset value for cylinder box
License requirements: None.
- radialOffset() - Method in interface nxopen.tooling.StockSizeBuilder
-
Returns the clearance value for the cylinder blank in radial direction.
- radialOriginDistance() - Method in interface nxopen.geometricutilities.ModlMotion
-
- radialPitch() - Method in interface nxopen.geometricutilities.SpiralPattern
-
Returns the radial pitch of spiral
License requirements: None.
- radialPlaneMode() - Method in interface nxopen.cam.TurnAvoidanceClearanceBuilder
-
Returns the radial plane mode
License requirements: None.
- radialPlaneMode() - Method in interface nxopen.cam.TurnProbeClearanceBuilder
-
Returns the radial plane mode
License requirements: None.
- radialPlanePoint() - Method in interface nxopen.cam.TurnAvoidanceClearanceBuilder
-
Returns the radial plane point
License requirements: None.
- radialPlanePoint() - Method in interface nxopen.cam.TurnProbeClearanceBuilder
-
Returns the radial plane point
License requirements: None.
- radialPlanePoint() - Method in interface nxopen.features.SectionCurveBuilder
-
Returns the point for radial plane type
License requirements: None.
- radialPlaneValue() - Method in interface nxopen.cam.TurnAvoidanceClearanceBuilder
-
Returns the radial plane value
License requirements: None.
- radialPlaneValue() - Method in interface nxopen.cam.TurnProbeClearanceBuilder
-
Returns the radial plane value
License requirements: None.
- radialPlaneVector() - Method in interface nxopen.features.SectionCurveBuilder
-
Returns the vector for radial plane type
License requirements: None.
- radialPointCount() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns the number of points in radial direction
License requirements: None.
- radialSafeClearance() - Method in interface nxopen.cam.NcmTurnRoughFinishBuilder
-
Returns the radial safe clearance value
License requirements: None.
- radialSafeClearance() - Method in interface nxopen.cam.TeachmodeProfileMoveBuilder
-
Returns the radial safe clearance value
License requirements: None.
- radialSegments() - Method in interface nxopen.features.subdivision.SubdivisionPrimitiveShapeBuilder
-
- radialSegments() - Method in interface nxopen.features.subdivision.SubdivisionPrimitiveShapeBuilderEx
-
Returns the number of segments in radial direction.
- radialSpacing() - Method in interface nxopen.geometricutilities.CircularPattern
-
Returns the radial spacing of the instances of the pattern
License requirements: None.
- radialSpacing() - Method in interface nxopen.geometricutilities.PolygonPattern
-
Returns the radial spacing of the instances of the pattern
License requirements: None.
- radialStartAngle() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
Returns the expression containing the radial angle at which the envelope body will start.
- radialStepover() - Method in interface nxopen.cam.CylindricalMillingBuilder
-
Returns the Radial Stepover builder
License requirements: None.
- radialStiffness - Variable in class nxopen.uf.UFMotion.CylindricalBushing
-
- radialStock() - Method in interface nxopen.cam.BoundaryTurnBlank
-
Returns the radial stock
License requirements: None.
- radialStyle() - Method in interface nxopen.annotations.StyleBuilder
-
Returns the radial style builder
License requirements: None.
- RadialStyleBuilder - Interface in nxopen.annotations
-
- radialSymbol() - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder
-
Returns the radial symbol
License requirements: None.
- radialTrimPlane1() - Method in interface nxopen.cam.RoughFinishTurningBuilder
-
Returns the radial trim plane 1
License requirements: None.
- radialTrimPlane1Builder() - Method in interface nxopen.cam.TurnFeatureGeomBuilder
-
Returns the radial trim plane 1
License requirements: cam_base ("CAM BASE")
.
- radialTrimPlane2() - Method in interface nxopen.cam.RoughFinishTurningBuilder
-
Returns the radial trim plane 2
License requirements: None.
- radialTrimPlane2Builder() - Method in interface nxopen.cam.TurnFeatureGeomBuilder
-
Returns the radial trim plane 2
License requirements: cam_base ("CAM BASE")
.
- radialType() - Method in interface nxopen.motion.BushingCylindricalCoefficientsComponent
-
Returns the radial type
License requirements: None.
- radialType() - Method in interface nxopen.motion.BushingSphericalCoefficientsComponent
-
Returns the radial type
License requirements: None.
- RADIAN - Static variable in class nxopen.cae.xyplot.AngleUnit
-
Display angle in radian unit
- RADIAN_UNITS - Static variable in class nxopen.uf.UFMotion.AngularUnitsType
-
- RADIANCE - Static variable in class nxopen.cae.Result.Quantity
-
- RADIANS - Static variable in class nxopen.cam.InspectionCmmCommandBuilder.AngularUnitsOptions
-
Use radians
- RADIANT_PATTERN - Static variable in class nxopen.positioning.Constraint.Type
-
For internal use only
- RADIATION_PATCH - Static variable in class nxopen.cae.Result.Quantity
-
- RADIATIVE_ABSORBED_HEAT_FLUX - Static variable in class nxopen.cae.Result.Quantity
-
- RADIATIVE_FLUXIN_SOLID - Static variable in class nxopen.cae.Result.Quantity
-
- RADIATIVE_HEAT_FLUX - Static variable in class nxopen.cae.Result.Quantity
-
- RADIATIVE_INCIDENT_HEAT_FLUX - Static variable in class nxopen.cae.Result.Quantity
-
- RADIATIVE_REFLECTED_HEAT_FLUX - Static variable in class nxopen.cae.Result.Quantity
-
- RADIATIVE_SOURCE_HEAT_FLUX - Static variable in class nxopen.cae.Result.Quantity
-
- RADIATIVE_TRANSMITTED_HEAT_FLUX - Static variable in class nxopen.cae.Result.Quantity
-
- radii - Variable in class nxopen.uf.UFModeling.AskFaceMinRadiiData
-
- radii - Variable in class nxopen.uf.UFModeling.AskFacePropsData
-
- radiiExp - Variable in class nxopen.features.EdgeBlendBuilder.VariableRadiusData
-
The radius value of each point on the edge
- radiiExp - Variable in class nxopen.features.EdgeBlendBuilder.VariableRadiusDataNewData
-
The radius value of each point on the edge
- radiiValues - Variable in class nxopen.uf.UFModlFeatures.AskFaceBlendLawRadiiData
-
- radiiValues - Variable in class nxopen.uf.UFModlFeatures.AskFaceBlendLawRange1RadiiData
-
- radiiValues - Variable in class nxopen.uf.UFModlFeatures.AskFaceBlendLawRange2RadiiData
-
- RADIO_BOX - Static variable in class nxopen.uistyler.Dialog.ItemType
-
- RADIO_BOX - Static variable in class nxopen.uistyler.StylerItem.ItemType
-
Radio Box item
- RadioBox - Interface in nxopen.uistyler
-
Represents a RadioBox for UI Styler .
- RadioBox.ValueChanged - Interface in nxopen.uistyler
-
Called when a dialog user click on a button in the radio box.
- RADIOSITY - Static variable in class nxopen.ModelingViewHighQualityImage.ShadeMethod
-
An iterative light processing method where indirect lighting
in a scene is derived from direct light bouncing off of surfaces
before an image is rendered.
- RADIOSITY_FLUX - Static variable in class nxopen.cae.Result.Quantity
-
- RADIOSITY_LOAD - Static variable in class nxopen.cae.Result.Quantity
-
- radiosityQuality - Variable in class nxopen.uf.UFDisp.ShadeOptions
-
- radius() - Method in interface nxopen.annotations.ArcComponent
-
Returns the arc radius.
- RADIUS - Static variable in class nxopen.annotations.DimensionType
-
Radius dimension
- radius() - Method in interface nxopen.Arc
-
Returns the radius of the arc.
- radius() - Method in interface nxopen.cae.optimization.TBSCastCondition
-
Returns the radius value that is used internaly for the collision check during the removal of the elements
License requirements: None.
- radius() - Method in interface nxopen.cae.optimization.TBSTopologyRestrictAreaBuilder
-
Returns the radius
License requirements: None.
- radius() - Method in interface nxopen.cam.BoundaryTurnMemberCorner
-
Returns the corner radius
License requirements: None.
- radius() - Method in interface nxopen.cam.InspectionArcFeatureBuilder
-
Returns the inspection feature radius
License requirements: None.
- RADIUS - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.TolType
-
Radius
- radius() - Method in interface nxopen.cam.NcmClearanceBuilder
-
Returns the clearance cylinder and sphere radius
License requirements: None.
- radius() - Method in interface nxopen.cam.NcmLaserEngage
-
Returns the Radius
License requirements: None.
- radius() - Method in interface nxopen.cam.NcmLaserRetract
-
Returns the Radius
License requirements: None.
- RADIUS - Static variable in class nxopen.cam.ProbeCalibrateStylusMoveBuilder.CalibrateStylusType
-
Stylus ball radius
- radius() - Method in interface nxopen.cam.ToolChangeCiBuilder
-
Returns the Tool radius builder
License requirements: None.
- radius - Variable in class nxopen.cam.TrackingBuilder.Data
-
the radius
- radius() - Method in interface nxopen.cam.TrimPlane
-
Returns the radius
License requirements: None.
- radius() - Method in interface nxopen.cam.TurnConcaveCornerControl
-
Returns the Concave Corner Control radius
License requirements: None.
- radius() - Method in interface nxopen.cam.TurnCornerControl
-
Returns the Corner Control radius
License requirements: None.
- radius() - Method in interface nxopen.cam.TurnEngageRetractBuilder
-
Returns the Radius
License requirements: None.
- radius - Variable in class nxopen.cam.UdtSectionBuilder.Data
-
the radius
- radius() - Method in interface nxopen.cam.ZAxisSmoothing
-
Returns the smoothing radius.
- RADIUS - Static variable in class nxopen.die.AddendumSectionBuilder.SegmentParameterType
-
The radius parameter of an arc segment.
- radius() - Method in interface nxopen.die.QuickBinderBuilder
-
Returns the radius value of a cylidrical face.
- RADIUS - Static variable in class nxopen.die.QuickBinderWrapBuilder.EditSizeType
-
- radius() - Method in interface nxopen.die.ThroatChildBuilder
-
Returns the radius to be applied at the back of the throat, top and bottom
License requirements: ug_die_design ("Die Design")
.
- radius() - Method in interface nxopen.die.ThroatParentBuilder
-
Returns the radius to be applied at the back of the throat, top and bottom
License requirements: ug_die_design ("Die Design")
.
- radius() - Method in interface nxopen.facet.CreateTransitionBuilder
-
Returns the radius.
- radius - Variable in class nxopen.facet.FacetedEdge.CurveData
-
- radius - Variable in class nxopen.facet.FacetedFace.SurfaceData
-
- RADIUS - Static variable in class nxopen.features.AestheticFaceBlendBuilder.BlendType
-
Radius of the rolling ball is used to create the tangent lines.
- RADIUS - Static variable in class nxopen.features.AssociativeArcBuilder.EndOption
-
Radius
- RADIUS - Static variable in class nxopen.features.AssociativeArcBuilder.MidOption
-
Radius
- radius() - Method in interface nxopen.features.AssociativeArcBuilder
-
Returns the radius of arc
License requirements: None.
- radius - Variable in class nxopen.features.ConcaveFacesBuilder.CalculatePointCurvatureData
-
the value at point selected
- radius - Variable in class nxopen.features.EdgeBlendBuilder.ChainsetAndSectionValueData
-
The radius of this chain set collector
- radius - Variable in class nxopen.features.EdgeBlendBuilder.ChainsetAndStatusData
-
The radius of this chain set collector
- radius - Variable in class nxopen.features.EdgeBlendBuilder.ChainsetData
-
The radius of this chain set collector
- radius() - Method in interface nxopen.features.FitCurveBuilder
-
Returns the circle radius
License requirements: None.
- radius() - Method in interface nxopen.features.GeodesicFilletBuilder
-
Returns the radius
License requirements: None.
- RADIUS - Static variable in class nxopen.features.GlobalShapingBuilder.RadiusType
-
Radius method.
- RADIUS - Static variable in class nxopen.features.HelixBuilder.SizeOptions
-
Size by radius
- RADIUS - Static variable in class nxopen.features.LawExtensionBuilderEx.MiterOptions
-
Creates a four-sided patch between two faces
- radius() - Method in interface nxopen.features.OffsetSurfaceBuilder
-
Returns the radius for error vertex excision during partial offset
License requirements: None.
- RADIUS - Static variable in class nxopen.features.RadialDimensionBuilder.ValueOption
-
- radius() - Method in interface nxopen.features.ResizeBlendBuilder
-
Returns the blend radius to resize, don't use it until nx502
License requirements: None.
- RADIUS - Static variable in class nxopen.features.ResizeCurveBuilder.ValueType
-
- radius() - Method in interface nxopen.features.sheetmetal.BeadBuilder
-
Returns the radius of the bead.
- RADIUS - Static variable in class nxopen.features.sheetmetal.CornerTreatmentBuilder.CornerTreatmentType
-
- radius() - Method in interface nxopen.features.shipdesign.PenetrationAssociationBuilder
-
Returns the radius expression
License requirements: None.
- radius() - Method in interface nxopen.features.shipdesign.PenetrationCutoutBuilder
-
Returns the radius expression
License requirements: None.
- radius() - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder
-
Returns the radius expression
License requirements: None.
- radius() - Method in interface nxopen.features.SmoothCurveStringBuilder
-
Returns the radius for transition fillets.
- radius() - Method in interface nxopen.features.SphericalCornerBuilder
-
Returns the Radius of the spherical corner
License requirements: None.
- radius() - Method in interface nxopen.features.VariableRadiusPointsBuilder
-
Returns the radius of variable radius point
License requirements: None.
- radius() - Method in interface nxopen.features.vehicledesign.WheelFixingBuilder
-
Returns the expression that contains the value which indicates the radius of the wheel fixing when the shape is circle segment.
- RADIUS - Static variable in class nxopen.fields.FieldEvaluator.InverseDistanceWeightingEnum
-
Sum of the weighted value of points within a radius (as a fraction of the bounding box diagonal), based on the inverse of the distance
- radius() - Method in interface nxopen.geometricutilities.CircularCrossSection
-
Returns the radius for the circular section with face blend
License requirements: None.
- RADIUS - Static variable in class nxopen.geometricutilities.CombOptionsBuilder.AnalysisTypes
-
Radius
- RADIUS - Static variable in class nxopen.geometricutilities.ReduceSurfaceRadiusBuilder.FaceSelectionSpecification
-
- radius - Variable in class nxopen.markup.Circle.CenterAndRadiusData
-
- RADIUS - Static variable in class nxopen.MeasureDistanceBuilder.DistanceType
-
- RADIUS - Static variable in class nxopen.MeasureManager.RadialMeasureType
-
- RADIUS - Static variable in class nxopen.mechanicalrouting.BendCornerTypeBuilder.BendMethod
-
Radius method allows corner creation with the specified radius value
- radius() - Method in interface nxopen.mechanicalrouting.BendCornerTypeBuilder
-
Returns the bend corner radius
License requirements: routing_base ("Routing Basic")
.
- radius() - Method in interface nxopen.mechatronics.CollisionShapeBuilder
-
Returns the radius.
- radius() - Method in interface nxopen.mechatronics.RackPinionBuilder
-
Returns a value that indicates radius value for the pinion.
- radius() - Method in interface nxopen.motion.SegmentBuilder
-
Returns the radius of a constant radius segment
License requirements: mechanisms ("MECHANISMS")
.
- radius() - Method in interface nxopen.motion.TirePropertyBasicParameters
-
Returns the radius.
- radius() - Method in interface nxopen.motion.TirePropertyFtBuilder
-
Returns the Radius.
- radius() - Method in interface nxopen.motion.TirePropertyNonInertialBuilder
-
Returns the radius.
- RADIUS - Static variable in class nxopen.preferences.RoutingPath.RadiusMethod
-
Use specified radius
- radius - Variable in class nxopen.routing.BendReportManager.XyzReport
-
Radius of the bend.
- radius - Variable in class nxopen.routing.BendReportManager.YbcReport
-
Radius of the bend.
- RADIUS - Static variable in class nxopen.routing.CornerTypeBuilder.BendMethods
-
Radius method allows corner creation with the specified radius value
- RADIUS - Static variable in class nxopen.routing.CornerTypeBuilder.BendOptions
-
Deprecated.
Radius method allows corner creation with the specified radius value
- RADIUS - Static variable in class nxopen.routing.SplinePathBuilder.SplinePathAttributeOptions
-
A radius method option for spline user attribute
- radius() - Method in interface nxopen.tooling.GeneralInsertBuilder
-
Returns the radius
License requirements: None.
- radius() - Method in interface nxopen.tooling.StripperVentingBuilder
-
Returns the blend radius of venting hole
License requirements: None.
- radius - Variable in class nxopen.uf.UFCurve.Arc
-
- RADIUS - Static variable in class nxopen.uf.UFCurve.ConstraintType
-
- radius - Variable in class nxopen.uf.UFCutter.TurnTrackingPointData
-
- radius - Variable in class nxopen.uf.UFDrf.ArcInfo
-
- radius - Variable in class nxopen.uf.UFEval.Arc
-
- radius - Variable in class nxopen.uf.UFFacet.AskSurfaceDataForFaceData
-
- radius - Variable in class nxopen.uf.UFGdt.GeometricDefinition
-
- radius - Variable in class nxopen.uf.UFModeling.AskFaceData
-
- radius - Variable in class nxopen.uf.UFModl.BlendPoint
-
- radius - Variable in class nxopen.uf.UFModl.BlendPointData
-
- radius - Variable in class nxopen.uf.UFModl.EdgeBlendSet
-
- radius - Variable in class nxopen.uf.UFModl.FlangeData
-
- radius - Variable in class nxopen.uf.UFModl.ReblendFaceData
-
- radius - Variable in class nxopen.uf.UFModl.SmbendCornerData
-
- radius - Variable in class nxopen.uf.UFModl.SmbendData
-
- radius - Variable in class nxopen.uf.UFModlGeneral.AskCircularIsetParmsData
-
- radius - Variable in class nxopen.uf.UFPath.ToolChange
-
- radius - Variable in class nxopen.uf.UFRoute.AskObjBendRadiusData
-
- radius1 - Variable in class nxopen.uf.UFModeling.AskChamferParmsData
-
- radius2 - Variable in class nxopen.uf.UFModeling.AskChamferParmsData
-
- RADIUS_ANGLE_ARC - Static variable in class nxopen.features.SectionSurfaceBuilderEx.CircularType
-
Radius Angle Arc mode
- RADIUS_DIM - Static variable in class nxopen.Sketch.ConstraintType
-
- RADIUS_DIM - Static variable in class nxopen.uf.UFSket.ConType
-
- RADIUS_INSIDE - Static variable in class nxopen.uf.UFSmd.RadiusTypeE
-
- RADIUS_INVALID_OPTION - Static variable in class nxopen.uf.UFSmd.RadiusTypeE
-
- RADIUS_NUM_ITEMS - Static variable in class nxopen.uf.UFSmd.RadiusTypeE
-
- RADIUS_OF_COMB - Static variable in class nxopen.preferences.PartModeling.CurveCurvatureDisplayType
-
Curve curvature display is radius of Curvature Comb
- RADIUS_OF_CURVATURE - Static variable in class nxopen.geometricanalysis.SurfaceIntersectionBuilder.LabelValues
-
label showing radius of curvature value
- RADIUS_OF_GYRATION - Static variable in class nxopen.MeasureBodies.ActiveValue
-
- RADIUS_OUTSIDE - Static variable in class nxopen.uf.UFSmd.RadiusTypeE
-
- RADIUS_RATIO - Static variable in class nxopen.routing.BendCornerCollection.Type
-
Using radius or ratio to
create a bend corner.
- RADIUS_REDUCTION - Static variable in class nxopen.features.GlobalShapingBuilder.DeformationTypeValues
-
Radius Reduction
- RADIUS_TOO_SMALL - Static variable in class nxopen.uf.UFConstants
-
- RADIUS_USE_CR - Static variable in class nxopen.uf.UFDrf.RadiusSymbol
-
- RADIUS_USE_R - Static variable in class nxopen.uf.UFDrf.RadiusSymbol
-
- RADIUS_USE_RAD - Static variable in class nxopen.uf.UFDrf.RadiusSymbol
-
- RADIUS_USE_SR - Static variable in class nxopen.uf.UFDrf.RadiusSymbol
-
- RadiusAnalysisBuilder - Interface in nxopen.geometricanalysis
-
Represents a Radius Analysis builder.
- RadiusAnalysisBuilder.DisplayModes - Class in nxopen.geometricanalysis
-
The display type.
- RadiusAnalysisBuilder.Types - Class in nxopen.geometricanalysis
-
Represents the radius type.
- radiusAngle - Variable in class nxopen.uf.UFDrf.AskAnnData
-
- radiusBuilder() - Method in interface nxopen.cam.GrooveToolBuilder
-
Returns the radius builder (inheritable double)
License requirements: cam_base ("CAM BASE")
.
- radiusBuilder() - Method in interface nxopen.cam.NcmPlanarEngRetBuilder
-
Returns the engage/retract radius builder
License requirements: None.
- radiusBuilder() - Method in interface nxopen.cam.NcmScEngRetBuilder
-
Returns the engage/retract radius builder
License requirements: None.
- radiusConstraintMethod() - Method in interface nxopen.features.BridgeCurveBuilderEx
-
Returns the radius constraint method
License requirements: None.
- radiusConstraintType() - Method in interface nxopen.features.StyledBlendBuilder
-
Returns the radius constraint type
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- radiusConstraintValue() - Method in interface nxopen.features.StyledBlendBuilder
-
Returns the radius constraint value
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- radiusData - Variable in class nxopen.uf.UFFacet.AskSurfaceDataForFaceData
-
- radiusDia() - Method in interface nxopen.tooling.CornerDesignBuilder
-
Returns the corner radius.
- radiusDiameterOption() - Method in interface nxopen.features.RadialDimensionBuilder
-
Returns the radius diameter option
License requirements: None.
- RadiusDimension - Interface in nxopen.annotations
-
Represents a radius dimension
To create or edit an instance of this class, use
RadialDimensionBuilder
Created in NX4.0.0
- RadiusDimension - Interface in nxopen.blockstyler
-
Represents a Radius Dimension block .
- radiusDimension() - Method in interface nxopen.SketchPolygonBuilder
-
Returns the radius dimension.
- radiusDimension() - Method in interface nxopen.tooling.SlugRetentionBuilder
-
Returns the radius dimension
License requirements: None.
- RadiusDimensionType - Class in nxopen.annotations
-
Specifies the radius dimension type
- radiusExp - Variable in class nxopen.uf.UFModl.BlendPointData
-
- radiusExp - Variable in class nxopen.uf.UFModl.EdgeBlendSet
-
- radiusfactor - Variable in class nxopen.cae.SetManager.TargetSetDistributedPlanesData
-
Multiplying factor applied to the model bounding box diagonal to get the sphere radius.
- radiusForRamp() - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
Returns the the sweep guide curve radius.
- radiusid - Variable in class nxopen.cam.TrackingBuilder.Data
-
the radius ID
- radiusid - Variable in class nxopen.uf.UFCutter.TurnTrackingPointData
-
- radiusLaw() - Method in interface nxopen.features.SectionSurfaceBuilder
-
- radiusLaw() - Method in interface nxopen.features.SectionSurfaceBuilderEx
-
Returns the radius law.
- radiusLaw() - Method in interface nxopen.features.SilhouetteFlangeBuilder
-
Returns the radius law.
- radiusmethod - Variable in class nxopen.cae.SetManager.TargetSetDistributedPlanesData
-
Method used to define the sphere radius
- RadiusMethod - Class in nxopen.geometricutilities
-
This enum represents the radius options
- radiusObjects() - Method in interface nxopen.MeasureDistanceBuilder
-
Returns the radius objects
License requirements: None.
- RADIUSOF_CURVATURE - Static variable in class nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder.CalculationMethod
-
needle of radius of curvature value
- RADIUSOF_CURVATURE - Static variable in class nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder.LabelValues
-
label showing radius of curvature value
- RADIUSOF_CURVATURE - Static variable in class nxopen.geometricanalysis.sectionanalysis.SectionAnalysisBuilder.CalculationMethodType
-
Radius of curvature
- RADIUSOF_CURVATURE - Static variable in class nxopen.geometricanalysis.sectionanalysis.SectionAnalysisExBuilder.CalculationMethodType
-
Radius of curvature
- RADIUSOF_CURVATURE - Static variable in class nxopen.geometricanalysis.SurfaceIntersectionBuilder.CalculationTypes
-
needle of radius of curvature value
- radiusOfDie() - Method in interface nxopen.features.sheetmetal.DrawnCutoutBuilder
-
Returns the Radius value of the sharp edges of the bottom face
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- radiusOfExclusion() - Method in interface nxopen.motion.AnalyticalContactBuilder
-
Returns the radius of exclusion
License requirements: mechanisms ("MECHANISMS")
.
- radiusOfGyration() - Method in interface nxopen.MeasureBodies
-
Returns the value for radius of gyration of the measurement
License requirements: None.
- radiusOption() - Method in interface nxopen.cam.TurnConcaveCornerControl
-
Returns the Concave Corner Control radius option
License requirements: None.
- radiusOption() - Method in interface nxopen.features.CircularBlendCurveBuilder
-
- radiusOption() - Method in interface nxopen.geometricutilities.CircularCrossSection
-
Returns the radius option for the circular section with face blend
License requirements: None.
- radiusOptions() - Method in interface nxopen.features.GlobalShapingBuilder
-
Returns the radius options
License requirements: None.
- radiusOrAngle - Variable in class nxopen.facet.FacetedFace.SurfaceData
-
- radiusOrDistance() - Method in interface nxopen.cam.TurnGrooveCornerControl
-
Returns the Groove Corner Control radius or distance
License requirements: None.
- radiusOrRatio - Variable in class nxopen.routing.SBendCorner.SBendData
-
Bend radius or bend_ratio.
- radiusReductionPercent() - Method in interface nxopen.features.GlobalShapingBuilder
-
Returns the radius reduction percent
License requirements: None.
- radiusSource() - Method in interface nxopen.routing.SplinePathBuilder
-
Returns the driving expression, value, or attribute of the bounded radius.
- radiusSymbol() - Method in interface nxopen.annotations.DiameterRadiusPreferences
-
Returns the radius symbol
License requirements: None.
- radiusSymbol() - Method in interface nxopen.annotations.RadialStyleBuilder
-
Returns the text for a user-defined radius symbol
License requirements: None.
- RadiusSymbol - Class in nxopen.annotations
-
Specifies the radius symbol
- radiusSymbol - Variable in class nxopen.uf.UFDrf.DiameterRadiusPreferences
-
- radiusSymbolText() - Method in interface nxopen.annotations.DiameterRadiusPreferences
-
Returns the symbol text for user defined radius symbol
License requirements: None.
- radiusSymbolType() - Method in interface nxopen.annotations.RadialStyleBuilder
-
Returns the radius symbol type
License requirements: None.
- radiusSymbolType - Variable in class nxopen.uf.UFDrf.DiameterRadiusPreferences
-
- radiusToggle() - Method in interface nxopen.cam.ToolChangeCiBuilder
-
Returns the Tool radius toggle
License requirements: None.
- radiusTolerance() - Method in interface nxopen.cam.NCAssistantBuilder
-
Returns the Radius Tolerance
License requirements: None.
- RadiusType - Class in nxopen.cae
-
Specify the radius point type
- radiusType - Variable in class nxopen.uf.UFModl.FlangeData
-
- radiusType - Variable in class nxopen.uf.UFModl.SmbendCornerData
-
- radiusType - Variable in class nxopen.uf.UFModl.SmbendData
-
- radiusType - Variable in class nxopen.uf.UFSmd.GenPrefs
-
- radiusVal - Variable in class nxopen.uf.UFDrf.AskObjectPreferencesData
-
- radiusvalue - Variable in class nxopen.cae.SetManager.TargetSetDistributedPlanesData
-
Radius mahual value.
- radiusValue() - Method in interface nxopen.features.FitSurfaceBuilder
-
Returns the radius is fixed to a specific value
License requirements: None.
- radiusValue - Variable in class nxopen.uf.UFDrf.AskPreferencesData
-
- radNum - Variable in class nxopen.uf.UFModlFeatures.AskFaceBlendLawRadiiData
-
- radNum - Variable in class nxopen.uf.UFModlFeatures.AskFaceBlendLawRange1RadiiData
-
- radNum - Variable in class nxopen.uf.UFModlFeatures.AskFaceBlendLawRange2RadiiData
-
- radOfCur - Variable in class nxopen.uf.UFModlGeneral.AskCurvePropsData
-
- radStepoverType() - Method in interface nxopen.cam.DmRadBuilder
-
Returns the type of Stepover for the Radial Cut method.
- radStockBuilder() - Method in interface nxopen.cam.TurnMethodBuilder
-
Returns the radial stock builder (inheritable double)
License requirements: cam_base ("CAM BASE")
.
- radTraverseDir() - Method in interface nxopen.cam.DmRadBuilder
-
Returns the Radial Cut/ Traverse Direction
License requirements: None.
- RAIL - Static variable in class nxopen.geometricutilities.TransitionCurveBuilder.TangentDirections
-
transition curve will be tangent to the blend rail curve
- rail() - Method in interface nxopen.SketchIntersectionPointBuilder
-
Returns the rail
License requirements: None.
- railBodies() - Method in interface nxopen.motion.AnalyticalContactBuilder
-
Returns the rail bodies
License requirements: mechanisms ("MECHANISMS")
.
- railCurve() - Method in interface nxopen.motion.AnalyticalContactBuilder
-
Returns the rail curve
License requirements: mechanisms ("MECHANISMS")
.
- railGeometryData() - Method in interface nxopen.motion.AnalyticalContactBuilder
-
Returns the rail line-arc file option
License requirements: mechanisms ("MECHANISMS")
.
- railGeometryDataFile() - Method in interface nxopen.motion.AnalyticalContactBuilder
-
Returns the rail line-arc file.
- RailingFeature - Interface in nxopen.linedesigner
-
Represents a rail feature
To create or edit an instance of this class, use
RailingFeatureBuilder
Created in NX9.0.0
- RailingFeatureBuilder - Interface in nxopen.linedesigner
-
Represents a LineDesigner.RailingFeature
Features.FeatureBuilder
To create a new instance of this class, use nxopen.linedesigner.LineDesignerManager#createRailingFeatureBuilder
Default values.
- RailingFeatureBuilder.PostOffsetType - Class in nxopen.linedesigner
-
This enum is providing possible post offset types
- RailingFeatureBuilder.RailCrossStyle - Class in nxopen.linedesigner
-
This enum is providing possible railing cross styles
- RailingFeatureBuilder.SelPostcrossStyle - Class in nxopen.linedesigner
-
This enum is providing possible selection post cross styles
- RailingFeatureBuilder.SpaceType - Class in nxopen.linedesigner
-
This enum is providing possible space types
- railLink() - Method in interface nxopen.motion.AnalyticalContactBuilder
-
Returns the rail link
License requirements: mechanisms ("MECHANISMS")
.
- railMaterialSide() - Method in interface nxopen.motion.AnalyticalContactBuilder
-
Returns the material side toggle for rail
License requirements: mechanisms ("MECHANISMS")
.
- RailOpeningFeature - Interface in nxopen.linedesigner
-
Represents a rail Opening feature
To create or edit an instance of this class, use
RailOpeningFeatureBuilder
Created in NX9.0.0
- RailOpeningFeatureBuilder - Interface in nxopen.linedesigner
-
Represents a LineDesigner.RailOpeningFeature
builder
To create a new instance of this class, use nxopen.linedesigner.LineDesignerManager#createRailOpeningFeatureBuilder
Default values.
- RailOpeningFeatureBuilder.GateOpeningStyle - Class in nxopen.linedesigner
-
This enum is providing possible gate opening styles
- railRollAngleCurve() - Method in interface nxopen.motion.AnalyticalContactBuilder
-
Returns the RailRollAngle function
License requirements: mechanisms ("MECHANISMS")
.
- railSplineFunctions() - Method in interface nxopen.motion.AnalyticalContactBuilder
-
Returns the spline function toggle for rail
License requirements: mechanisms ("MECHANISMS")
.
- railType() - Method in interface nxopen.cae.MeshFromBoundaryBuilder
-
Returns the type of rail mesh
License requirements: nx_masterfem ("Finite Element Modeling")
.
- railXCurve() - Method in interface nxopen.motion.AnalyticalContactBuilder
-
Returns the RailX function
License requirements: mechanisms ("MECHANISMS")
.
- railYCurve() - Method in interface nxopen.motion.AnalyticalContactBuilder
-
Returns the RailY function
License requirements: mechanisms ("MECHANISMS")
.
- railZCurve() - Method in interface nxopen.motion.AnalyticalContactBuilder
-
Returns the RailZ function
License requirements: mechanisms ("MECHANISMS")
.
- RAMBERG_OSGOOD - Static variable in class nxopen.cae.DurabilityDamageEvaluationBuilder.CyclicStressStrainModelEnum
-
- RAMBERG_OSGOOD - Static variable in class nxopen.cae.DurabilityEventFatigueSettingsBuilder.CyclicStressStrainModelEnum
-
RambergOsgood
- ramBodies() - Method in interface nxopen.presslinesimulation.HydraulicLifterBuilder
-
Returns the ram bodies.
- ramDirection() - Method in interface nxopen.presslinesimulation.HydraulicLifterBuilder
-
Returns the ram motion direction.
- ramMaxLift() - Method in interface nxopen.presslinesimulation.HydraulicLifterBuilder
-
Returns the ram maximum lift distance.
- RAMP - Static variable in class nxopen.cae.optimization.TBSTopologySensitivityOptimizationParameters.MaterialInterpolation
-
Rational approximation of material properties
- RAMP - Static variable in class nxopen.features.ShelfBuilder.StepMethod
-
- RAMP - Static variable in class nxopen.tooling.InsertAuxiliaryBuilder.ShankShapeTypes
-
ramp
- RAMP_ANGLE - Static variable in class nxopen.cam.CylinderMillingBuilder.DepthPerRevolutionTypes
-
Ramp Angle
- RAMP_BY_ANGLE - Static variable in class nxopen.cam.VolumeBased25DMillingOperationBuilder.CutDepthsType
-
cut depths type ramp by angle
- RAMP_BY_DEPTH - Static variable in class nxopen.cam.VolumeBased25DMillingOperationBuilder.CutDepthsType
-
cut depths type ramp by depth
- RAMP_IN_FIRST - Static variable in class nxopen.cam.RampingMode.Types
-
Ramping mode: Ramp In first
- RAMP_IN_ON_EVERY_OTHER_PASS - Static variable in class nxopen.cam.RampingMode.Types
-
Ramping mode: Ramp In on every other Pass
- RAMP_ON_PART - Static variable in class nxopen.cam.LevelToLevel.Types
-
Ramp on part
- RAMP_ON_SHAPE - Static variable in class nxopen.cam.NcmPlanarEngRetBuilder.EngRetTypes
-
Ramp on shape
- RAMP_ON_SHAPE - Static variable in class nxopen.cam.ToolPathSplitBuilder.TransferUsingMethods
-
ramp on shape
- RAMP_ON_SHAPE - Static variable in class nxopen.cam.ToolPathSplitParametersBuilder.TransferUsingMethods
-
ramp on shape
- RAMP_OUT_FIRST - Static variable in class nxopen.cam.RampingMode.Types
-
Ramping mode: Ramp Out first
- RAMP_OUT_ON_EVERY_OTHER_PASS - Static variable in class nxopen.cam.RampingMode.Types
-
Ramping mode: Ramp Out on every other Pass
- RAMP_OUT_OR_IN - Static variable in class nxopen.cam.MultiRamp.Types
-
Multi ramp pattern: Ramp out/in
- RAMP_OUT_OR_IN_ONLY - Static variable in class nxopen.cam.MultiRamp.Types
-
Multi ramp pattern: Ramp out/in only"
- rampAngle() - Method in interface nxopen.cam.CylinderMillingBuilder
-
Returns the Ramp Angle
License requirements: None.
- rampAngle() - Method in interface nxopen.cam.LevelToLevel
-
Returns the ramp angle
License requirements: None.
- rampAngle() - Method in interface nxopen.cam.NcmEngRetBuilder
-
Returns the engage/retract ramp angle
License requirements: None.
- rampAngle() - Method in interface nxopen.cam.NcmPlanarEngRetBuilder
-
Returns the engage/retract ramp angle
License requirements: None.
- rampAngle() - Method in interface nxopen.cam.NcmScEngRetBuilder
-
Returns the engage/retract ramp angle
License requirements: None.
- rampAngle() - Method in interface nxopen.cam.TrimPoint
-
Returns the trim point ramp angle
License requirements: None.
- rampAngle() - Method in interface nxopen.cam.ZAxisSmoothing
-
Returns the ramp angle.
- rampAngleOffset() - Method in interface nxopen.cam.TrimPoint
-
Returns the trim point ramp angle offset
License requirements: None.
- rampAngleOption() - Method in interface nxopen.cam.TrimPoint
-
Returns the trim point ramp angle option
License requirements: None.
- rampAngleVector() - Method in interface nxopen.cam.TrimPoint
-
Returns the trim point ramp angle vector
License requirements: None.
- rampDownAngle() - Method in interface nxopen.cam.UpDownCutting
-
Returns the ramp down angle
License requirements: None.
- RAMPING_Z - Static variable in class nxopen.cam.CutStrategy.Types
-
Cut strategy: Ramping Zig
- RAMPING_ZZ - Static variable in class nxopen.cam.CutStrategy.Types
-
Cut strategy: Ramping Zig-Zag
- RampingMode - Interface in nxopen.cam
-
Represents a ramping mode Builder .
- rampingMode() - Method in interface nxopen.cam.TurnCutParameters
-
Returns the ramping mode
License requirements: None.
- RampingMode.Types - Class in nxopen.cam
-
the ramping mode options .
- rampLength1() - Method in interface nxopen.features.ShelfBuilder
-
Returns the ramp length1
License requirements: None.
- rampLength2() - Method in interface nxopen.features.ShelfBuilder
-
Returns the ramp length2
License requirements: None.
- rampShankHeight() - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
Returns the ramp shank height.
- rampSteps() - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
Returns the ramp steps
License requirements: None.
- rampUpAngle() - Method in interface nxopen.cam.UpDownCutting
-
Returns the ramp up angle
License requirements: None.
- ramToPlungerRatio() - Method in interface nxopen.presslinesimulation.HydraulicLifterBuilder
-
Returns the ratio that determines how far the the ram will move relative to the plunger.
- RANDOM - Static variable in class nxopen.cae.AfuMathOperation.SrsToTimeStrategy
-
Random conversion strategy
- RANDOM - Static variable in class nxopen.cae.optimization.TBSTestFunction.Direction
-
Non-standard nodal random displacement
- RANDOM - Static variable in class nxopen.cae.responsesimulation.RSEvent.Type
-
- RANDOM - Static variable in class nxopen.mechatronics.ParameterStockBuilder.Assignment
-
Random
- RANDOM_ANGLES - Static variable in class nxopen.formboard.FormboardLayoutBuilder.BranchAngle
-
Randomly choose an angle for each
branch.
- randomColorDisplay() - Method in interface nxopen.preferences.PartVisualizationColorSetting
-
Returns the random color display selection.
- randomColorDisplayed - Variable in class nxopen.uf.UFDisp.SystemParams
-
- randomColorDisplayOption() - Method in interface nxopen.preferences.PartVisualizationColorSetting
-
Returns the random color display flag.
- randomColorObjectType - Variable in class nxopen.uf.UFDisp.SystemParams
-
- randomEventDuration() - Method in interface nxopen.cae.DurabilityRandomFatigueBuilder
-
Returns the random event duration.
- randomFatigueCollection() - Method in interface nxopen.cae.DurabilityManager
-
Returns the durability fatigue collection belonging to this sim part.
- randomFatigueMethod() - Method in interface nxopen.cae.DurabilityRandomFatigueBuilder
-
Returns the random fatigue method.
- range() - Method in interface nxopen.cae.DurSpecialistSuperpositionEventBuilder
-
Returns the interval range.
- RANGE - Static variable in class nxopen.cae.responsesimulation.FrequencyDefinition.Definition
-
- RANGE - Static variable in class nxopen.cam.ToolPathEditorBuilder.TrimPathType
-
- RANGE - Static variable in class nxopen.cam.TurnRoughFinishLocalReturnBuilder.AdjustmentModeTypes
-
Ajustment: Range
- RANGE - Static variable in class nxopen.features.DeformDefinitionBuilder.ExpressionType
-
Input is within a range of values (integer or double)
- range() - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
Returns the range
License requirements: None.
- range() - Method in interface nxopen.mechatronics.DistanceSensorBuilder
-
Returns the range of distance sensor.
- RANGE - Static variable in class nxopen.tooling.MWMoldedPartValidationBuilder.RangeType
-
user-defined range limit values
- range - Variable in class nxopen.uf.UFPath.SpindleOn
-
- RANGE - Static variable in class nxopen.visualreporting.Classifier.TypeOption
-
Range classifier type
- RANGE_BOTTOM - Static variable in class nxopen.cam.CutLevel.MeasureTypes
-
Current Range Bottom
- RANGE_BOTTOM - Static variable in class nxopen.cam.CutLevel.Types
-
Only at Range Bottom
- RANGE_TOP - Static variable in class nxopen.cam.CutLevel.MeasureTypes
-
Current Range Top
- rangeAuto() - Method in interface nxopen.cae.xyplot.ArgumentAxisStyleSetting
-
Returns a value indicating whether to set axis range automatically
License requirements: None.
- rangeDepth() - Method in interface nxopen.cam.BladeCutLevels
-
Returns the range depth
License requirements: None.
- rangeDepthType() - Method in interface nxopen.cam.MachiningRegionBuilder
-
Returns the range type
License requirements: None.
- rangeEnd() - Method in interface nxopen.cae.DurSpecialistSuperpositionEventBuilder
-
Returns the range end
License requirements: None.
- rangeEnd - Variable in class nxopen.uf.UFDraw.TabnotParams
-
- rangeFlag - Variable in class nxopen.uf.UFPath.SpindleOn
-
- rangeMax() - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
Returns the legend range max
License requirements: None.
- rangeMin() - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
Returns the legend range min
License requirements: None.
- ranges - Variable in class nxopen.uf.UFSf.ColorAttr
-
- rangeStart() - Method in interface nxopen.cae.DurSpecialistSuperpositionEventBuilder
-
Returns the range start
License requirements: None.
- rangeStart - Variable in class nxopen.uf.UFDraw.TabnotParams
-
- rangeType() - Method in interface nxopen.cam.CutLevel
-
Returns the range type
License requirements: None.
- RANK_BY_CALCULATION - Static variable in class nxopen.cae.aerostructures.MarginResultTableDataProvider.ColumnType
-
- RANK_BY_FAILURE_MODE - Static variable in class nxopen.cae.aerostructures.MarginResultTableDataProvider.ColumnType
-
- RANK_BY_LOAD_CASE - Static variable in class nxopen.cae.aerostructures.MarginResultTableDataProvider.ColumnType
-
- RAPID - Static variable in class nxopen.cam.CamOperationMotionType
-
- RAPID - Static variable in class nxopen.cam.CamPathMotionType
-
- RAPID - Static variable in class nxopen.cam.FeedRateUnit
-
use rapid as feed rate unit
- RAPID - Static variable in class nxopen.cam.MoveBuilder.Motion
-
Rapid
- rapid() - Method in interface nxopen.cam.PathDisplayColors
-
Returns the color rapid
License requirements: None.
- RAPID - Static variable in class nxopen.cam.TurnAvoidancePathPointsBuilder.FeedrateModesTypes
-
Feed Rate: Automatic
- RAPID_MOVES_ONLY - Static variable in class nxopen.cam.FeedsWedmBuilder.OutputTypes
-
- RapidDimensionBuilder - Interface in nxopen.annotations
-
- rapidFeed() - Method in interface nxopen.cam.MachineGroupBuilder
-
Returns the Rapid Feed Rate
License requirements: None.
- rapidFeedRate() - Method in interface nxopen.cam.HoleMakingBuilder
-
Returns the Rapid Feed Rate
License requirements: None.
- RapidSurface - Interface in nxopen.features
-
Represents a Rapid Surfacing feature
To create or edit an instance of this class, use
RapidSurfaceBuilder
Created in NX5.0.0
- RapidSurfaceBuilder - Interface in nxopen.features
-
- RapidSurfaceBuilder.AttachmentTypes - Class in nxopen.features
-
the attachment types
- RapidSurfaceBuilder.LoopTypes - Class in nxopen.features
-
the subdivision loop types
- RapidSurfaceBuilder.OperationTypes - Class in nxopen.features
-
the operation types
- raptoOffset() - Method in interface nxopen.cam.HoleDrillingCutParameters
-
Returns the rapto offset
License requirements: None.
- raptoOffsetBuilder() - Method in interface nxopen.cam.HoleMakingBuilder
-
Returns the rapto offset builder (inheritable double)
License requirements: None.
- raptoOffsetToggle() - Method in interface nxopen.cam.HoleMakingBuilder
-
Returns the rapto offset flag
License requirements: None.
- RASTER_IMAGE - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide raster images
- RASTER_IMAGE - Static variable in class nxopen.ModelingViewHighQualityImage.FormatType
-
A normal single raster image
- RASTER_IMAGE_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- RasterImage - Interface in nxopen.display
-
Represents a
RasterImage
that provides
placing an imported image onto a plane (with controls for orientation,
sizing, and display) to use as a reference in the model to create geometry.
- RasterImage - Interface in nxopen.features
-
Represents a Raster Image feature
Not supported by KF at this time
.
- RasterImage.MaxTextureSize - Class in nxopen.features
-
Specifies the maximum number of pixels to allow for the width or height
of a raster image.
- RasterImageBuilder - Interface in nxopen.display
-
- rasterImages() - Method in interface nxopen.CGMBuilder
-
Returns the Raster Images option.
- rasterImages() - Method in interface nxopen.PlotBuilder
-
Returns the raster images option.
- rasterImages() - Method in interface nxopen.PrintBuilder
-
Returns the raster images option.
- rasterImages() - Method in interface nxopen.PrintPDFBuilder
-
Returns the Raster Images option.
- RATIO - Static variable in class nxopen.drawings.ScaleValueFormatTypes
-
- RATIO - Static variable in class nxopen.drawings.ViewScaleBuilder.Type
-
determine scale from numerator / denominator
- ratio() - Method in interface nxopen.features.PointSetBuilder
-
Returns the ratio of geometric progression.
- ratio() - Method in interface nxopen.features.SectionCurveBuilder
-
Returns the ratio
License requirements: None.
- RATIO - Static variable in class nxopen.features.shipdesign.PlateChamferBuilder.AngleMethod
-
Use the ratio for the chamfer parameters
- ratio() - Method in interface nxopen.features.shipdesign.PlateChamferBuilder
-
Returns the ratio
License requirements: None.
- RATIO - Static variable in class nxopen.motion.JointDefine.ScrewJointMethodType
-
Ratio method
- RATIO - Static variable in class nxopen.preferences.RoutingPath.RadiusMethod
-
Use ratio to stock diameter to determine radius
- ratio - Variable in class nxopen.uf.UFCurve.SectionPerpcrvData
-
- ratio - Variable in class nxopen.uf.UFMotion.JointCoupler
-
- RATIO_TO_DIAMETER - Static variable in class nxopen.mechanicalrouting.BendCornerTypeBuilder.BendMethod
-
Ratio to diameter method
- RATIO_TO_DIAMETER - Static variable in class nxopen.routing.CornerTypeBuilder.BendMethods
-
Ratio to diameter method
- RATIO_TO_DIAMETER - Static variable in class nxopen.routing.CornerTypeBuilder.BendOptions
-
Deprecated.
Ratio to diameter method
- RATIO_TO_DIAMETER - Static variable in class nxopen.routing.SplinePathBuilder.SplinePathAttributeOptions
-
A ratio to diameter method option for spline user attribute.
- RATIO_TO_DIAMETER - Static variable in class nxopen.routing.SplinePathBuilder.SplinePathRadiusSource
-
Specify radius by ratio to stock.
- ratioExpression() - Method in interface nxopen.motion.CouplerBuilder
-
Returns the ratio expression
License requirements: None.
- rational() - Method in interface nxopen.Spline
-
Returns the rationality of the spline
License requirements: None.
- RATIONAL_NO - Static variable in class nxopen.uf.UFConstants
-
- RATIONAL_UNKNOWN - Static variable in class nxopen.uf.UFConstants
-
- RATIONAL_YES - Static variable in class nxopen.uf.UFConstants
-
- ratioToDiameter() - Method in interface nxopen.mechanicalrouting.BendCornerTypeBuilder
-
Returns the bend corner ratio to diameter
License requirements: routing_base ("Routing Basic")
.
- ratioType() - Method in interface nxopen.motion.JointDefine
-
Returns the ratio type of a screw joint
License requirements: None.
- RAY - Static variable in class nxopen.tooling.WallThicknessCheckerBuilder.CalculateMethod
-
Ray
- RAY_TRACED - Static variable in class nxopen.ModelingViewHighQualityImage.ShadeMethod
-
Produces photo-realistic images generated with ray tracing.
- RAY_TRACED_FFA - Static variable in class nxopen.ModelingViewHighQualityImage.ShadeMethod
-
Same as the Ray Traced option, but with
Feature Following Anti-aliasing.
- RayHitPointInfo() - Constructor for class nxopen.uf.UFModl.RayHitPointInfo
-
- RayHitPointInfo(double[], double[], Tag, Tag) - Constructor for class nxopen.uf.UFModl.RayHitPointInfo
-
- rayLength() - Method in interface nxopen.features.vehicledesign.WindshieldDatumBuilder
-
Returns the ray length.
- RAYTRACE - Static variable in class nxopen.uf.UFDisp.ShadeMethod
-
- rayTracedEditor() - Method in interface nxopen.display.RayTracedStudioBuilder
-
Launch the Ray Traced Studio Editor command
License requirements: None.
- rayTracedRenderingErase() - Method in interface nxopen.display.RayTracedStudioBuilder
-
Erase Ray Traced Studio static (still) image from the Ray Traced Studio window
License requirements: None.
- rayTracedRenderingSave() - Method in interface nxopen.display.RayTracedStudioBuilder
-
Save a copy of the Ray Traced Studio static (still) image display from the window to an image file
License requirements: None.
- rayTracedRenderingStart() - Method in interface nxopen.display.RayTracedStudioBuilder
-
Start Ray Traced Studio static image rendering
License requirements: None.
- RayTracedStudioBuilder - Interface in nxopen.display
-
- RayTracedStudioBuilder.StationaryDisplayQualityType - Class in nxopen.display
-
To specify the quality and performance of the Ray Traced Studio display.
- rayTracedStudioDisplayGamma() - Method in interface nxopen.display.RayTracedStudioEditorBuilder
-
Returns the Ray Traced Studio display gamma, controls the overall contrast or brightness of the image's midtone values.
- RayTracedStudioEditorBuilder - Interface in nxopen.display
-
- RayTracedStudioEditorBuilder.DynamicRayTracedStudioTilingQualityType - Class in nxopen.display
-
To specify the quality and performance of the interactive, dynamic Ray Traced Studio display.
- RayTracedStudioEditorBuilder.RayTracedStudioStaticImageFileFormatType - Class in nxopen.display
-
To specify the Ray Traced Studio static image file format
- RayTracedStudioEditorBuilder.RayTracedStudioStaticImageOrientationType - Class in nxopen.display
-
To specify the Ray Traced Studio static image orientation
- RayTracedStudioEditorBuilder.RayTracedStudioStaticImageResolutionType - Class in nxopen.display
-
To specify the Ray Traced Studio static image resolution
- RayTracedStudioEditorBuilder.RayTracedStudioStaticImageSizeType - Class in nxopen.display
-
To specify the Ray Traced Studio static image size
- RayTracedStudioEditorBuilder.RayTracedStudioStaticImageUnitsType - Class in nxopen.display
-
To specify the Ray Traced Studio static image units
- RayTracedStudioEditorBuilder.StaticAntialiasingType - Class in nxopen.display
-
To specify the antialiasing quality during stationary Ray Traced Studio display during static image rendering
- RayTracedStudioEditorBuilder.StaticRayTracedStudioQualityType - Class in nxopen.display
-
To specify the quality and performance of the Ray Traced Studio display during static image rendering
- RayTracedStudioEditorBuilder.StationaryAntialiasingType - Class in nxopen.display
-
To specify the antialiasing quality during stationary Ray Traced Studio display when dynamic interaction stops
- RayTracedStudioEditorBuilder.StationaryRayTracedStudioQualityType - Class in nxopen.display
-
To specify the quality and performance of the Ray Traced Studio display when dynamic interaction stops
- rayTracedStudioStaticImageDotsPerInch() - Method in interface nxopen.display.RayTracedStudioEditorBuilder
-
Returns the Ray Traced Studio static image dots per inch (DPI)
License requirements: None.
- rayTracedStudioStaticImageDoubleHeight() - Method in interface nxopen.display.RayTracedStudioEditorBuilder
-
Returns the Ray Traced Studio static image height
License requirements: None.
- rayTracedStudioStaticImageDoubleWidth() - Method in interface nxopen.display.RayTracedStudioEditorBuilder
-
Returns the Ray Traced Studio static image width
License requirements: None.
- rayTracedStudioStaticImageFileFormat() - Method in interface nxopen.display.RayTracedStudioEditorBuilder
-
Returns the Ray Traced Studio static output image file format
License requirements: None.
- rayTracedStudioStaticImageLockAspectRatio() - Method in interface nxopen.display.RayTracedStudioEditorBuilder
-
Returns the Ray Traced Studio static image aspect ratio will be maintained
License requirements: None.
- rayTracedStudioStaticImageOrientation() - Method in interface nxopen.display.RayTracedStudioEditorBuilder
-
Returns the Ray Traced Studio static image orientation
License requirements: None.
- rayTracedStudioStaticImagePixelHeight() - Method in interface nxopen.display.RayTracedStudioEditorBuilder
-
Returns the Ray Traced Studio static image pixel height
License requirements: None.
- rayTracedStudioStaticImagePixelWidth() - Method in interface nxopen.display.RayTracedStudioEditorBuilder
-
Returns the Ray Traced Studio static image pixel width
License requirements: None.
- rayTracedStudioStaticImageResolution() - Method in interface nxopen.display.RayTracedStudioEditorBuilder
-
Returns the Ray Traced Studio static image resolution
License requirements: None.
- rayTracedStudioStaticImageSize() - Method in interface nxopen.display.RayTracedStudioEditorBuilder
-
Returns the Ray Traced Studio static image size
License requirements: None.
- rayTracedStudioStaticImageUnits() - Method in interface nxopen.display.RayTracedStudioEditorBuilder
-
Returns the Ray Traced Studio static image units
License requirements: None.
- raytraceMemory - Variable in class nxopen.uf.UFDisp.ShadeOptions
-
- RBE2 - Static variable in class nxopen.uf.UFSf.ElementType
-
- RBE2RBE3TO_ELEMENT_EDGE - Static variable in class nxopen.cae.CAEConnectionBuilder.EdgeToEdgeConnectionMethodTypeEnum
-
Create RBE2 between source node and projected node, and RBE3 between projected node and target edge nodes.
- RBE2RBE3TO_ELEMENT_FACE - Static variable in class nxopen.cae.CAEConnectionBuilder.EdgeToEdgeConnectionMethodTypeEnum
-
Create RBE2 bewteen source node and projected node, and RBE3 between projected node and target face nodes.
- RBE3 - Static variable in class nxopen.uf.UFSf.ElementType
-
- RBE3TO_EDGE_NODES - Static variable in class nxopen.cae.CAEConnectionBuilder.MethodTypeEnum
-
Create spider element using projected node and edge nodes
- RBE3TO_FACE_NODES - Static variable in class nxopen.cae.CAEConnectionBuilder.MethodTypeEnum
-
Create spider element using projected node and adjacent face nodes
- rbutt - Variable in class nxopen.uf.UFModl.FlangeData
-
- RCAR2004FRONT - Static variable in class nxopen.features.vehicledesign.CrashBarrierBuilder.ShapeType
-
- RCAR2004REAR - Static variable in class nxopen.features.vehicledesign.CrashBarrierBuilder.ShapeType
-
- RCAR2006 - Static variable in class nxopen.features.vehicledesign.CrashBarrierBuilder.ShapeType
-
- RCAR2006MULTI_DOMAIN - Static variable in class nxopen.features.vehicledesign.CrashBarrierBuilder.ShapeType
-
- RCP - Static variable in class nxopen.formboard.UpdateDiscrepancy.ObjectType
-
Routing Control Point.
- rcp() - Method in interface nxopen.routing.Corner
-
Returns the corner ControlPoint referenced by the Corner object.
- rcp - Variable in class nxopen.uf.UFRoute.AskRcpAtTermPortData
-
- RcpCornerInfoData() - Constructor for class nxopen.routing.CornerCollection.RcpCornerInfoData
-
- rcppos - Variable in class nxopen.routing.EditBendAngleBuilder.SelectedBendData
-
The position of the bend rcp
- RCPRODUCT - Static variable in class nxopen.cae.Result.Quantity
-
- rcs() - Method in interface nxopen.cam.OrientGeomBuilder
-
Returns the RCS
License requirements: cam_base ("CAM BASE")
.
- rcsDispStat - Variable in class nxopen.uf.UFCam.Preferences
-
- rcsInvMatrix - Variable in class nxopen.uf.UFCam.Preferences
-
- rcsMapStat - Variable in class nxopen.uf.UFCam.Preferences
-
- rcsOrigin - Variable in class nxopen.uf.UFCam.Preferences
-
- rcsStat - Variable in class nxopen.uf.UFCam.Preferences
-
- rcvbufsize - Variable in class nxopen.mechatronics.TCPClientBuilder.ConnectionInformationData
-
- rcvbufsize - Variable in class nxopen.mechatronics.TCPSignalServerBuilder.ConnectionInformationData
-
- rcvbufsize - Variable in class nxopen.mechatronics.UDPSignalClientBuilder.ConnectionInformationData
-
- rcvbufsize - Variable in class nxopen.mechatronics.UDPSignalServerBuilder.ConnectionInformationData
-
- rdistance() - Method in interface nxopen.cae.ElementTranslateBuilder
-
Returns the radial component of distance for translation in a cylindrical/spherical coordinate system
License requirements: None.
- reachZone - Variable in class nxopen.features.Human.CreateReachZoneData
-
reach zone
- REACTION - Static variable in class nxopen.cae.NodalForceReport.ForceComponent
-
- REACTION - Static variable in class nxopen.cae.NodalForceReportBuilder.Force
-
- REACTION_FORCE - Static variable in class nxopen.cae.responsesimulation.EvaluationResultType
-
- REACTION_FORCE - Static variable in class nxopen.cae.responsesimulation.SensorResultType
-
- REACTION_FORCE - Static variable in class nxopen.cae.Result.Quantity
-
- REACTION_FORCE_ABSOLUTE - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
-
Absolute nodal reaction force
- REACTION_FORCE_MPC - Static variable in class nxopen.cae.Result.Quantity
-
- REACTION_FORCE_ROTATION_ABSOLUTE - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
-
Absolute nodal reaction moment
- REACTION_FORCE_ROTATION_X - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
-
Nodal reaction moment around X-axis
- REACTION_FORCE_ROTATION_XABSOLUTE - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
-
Absolute nodal reaction moment around X-axis
- REACTION_FORCE_ROTATION_Y - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
-
Nodal reaction moment around Y-axis
- REACTION_FORCE_ROTATION_YABSOLUTE - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
-
Absolute nodal reaction moment around Y-axis
- REACTION_FORCE_ROTATION_Z - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
-
Nodal reaction moment around Z-axis
- REACTION_FORCE_ROTATION_ZABSOLUTE - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
-
Absolute nodal reaction moment around Z-axis
- REACTION_FORCE_X - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
-
Nodal reaction force in X-direction
- REACTION_FORCE_XABSOLUTE - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
-
Absolute nodal reaction force in X-direction
- REACTION_FORCE_Y - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
-
Nodal reaction force in Y-direction
- REACTION_FORCE_YABSOLUTE - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
-
Absolute nodal reaction force in Y-direction
- REACTION_FORCE_Z - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
-
Nodal reaction force in Z-direction
- REACTION_FORCE_ZABSOLUTE - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
-
Absolute nodal reaction force in Z-direction
- REACTION_MOMENT - Static variable in class nxopen.cae.Result.Quantity
-
- REACTION_MOMENT_MPC - Static variable in class nxopen.cae.Result.Quantity
-
- reactionArm() - Method in interface nxopen.motion.JointFrictionLms
-
Returns the reaction arm
License requirements: None.
- reactionArmExpression() - Method in interface nxopen.motion.JointFrictionAdams
-
Returns the reaction arm expression
License requirements: None.
- reactionArmExpression() - Method in interface nxopen.motion.JointFrictionRecurDyn
-
Returns the reaction arm expression
License requirements: None.
- reactionCsys() - Method in interface nxopen.motion.ScalarForceBuilder
-
Returns the reaction csys
License requirements: None.
- reactionForce() - Method in interface nxopen.motion.JointFrictionAdams
-
Returns the reaction force
License requirements: mechanisms ("MECHANISMS")
.
- reactionForce() - Method in interface nxopen.motion.JointFrictionRecurDyn
-
Returns the reaction force
License requirements: mechanisms ("MECHANISMS")
.
- reactionLink() - Method in interface nxopen.motion.BushingDefine
-
Returns the reaction link
License requirements: None.
- reactionLink() - Method in interface nxopen.motion.ConnectorBuilder
-
Returns the reaction link.
- reactionLink() - Method in interface nxopen.motion.ScalarForceBuilder
-
Returns the reaction link
License requirements: None.
- reactionLink() - Method in interface nxopen.motion.VObject
-
Returns the reaction link
License requirements: None.
- reactionLink - Variable in class nxopen.uf.UFMotion.ScalarForceTorque
-
- reactionLink - Variable in class nxopen.uf.UFMotion.VectorForceTorque
-
- reactionPoint() - Method in interface nxopen.motion.BushingDefine
-
Returns the reaction point
License requirements: None.
- reactionPoint() - Method in interface nxopen.motion.ConnectorBuilder
-
Returns the reaction point.
- reactionPoint() - Method in interface nxopen.motion.ScalarForceBuilder
-
Returns the reaction point
License requirements: None.
- READ - Static variable in class nxopen.mechatronics.SHMSignalConnectionBuilder.SHMSignalAccessType
-
read
- READ - Static variable in class nxopen.SpreadsheetManager.OpenMode
-
read mode
- READ_ONLY - Static variable in class nxopen.mechatronics.OPCClientBuilder.TagAccess
-
read only
- READ_ONLY - Static variable in class nxopen.tooling.SpreadsheetData.ParameterStatus
-
This parameter is read only
- READ_ONLY - Static variable in class nxopen.tooling.SpreadsheetDataParameter.Status
-
This parameter is read only
- READ_ONLY_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
-
Whether the component is read-only
- READ_WRITE - Static variable in class nxopen.mechatronics.OPCClientBuilder.TagAccess
-
read and write
- readAllSymbolNamesFromSbfFile() - Method in interface nxopen.annotations.AnnotationManager
-
Reads the names of all symbol fonts in the current symbol font definition file
License requirements: None.
- readAny(String, String) - Method in interface nxopen.SpreadsheetManager
-
Reads value in a given cell, from a given spreadsheet.
- readAssemblyConfigure(int, Component) - Method in interface nxopen.tooling.FastenerAssy
-
Reads fastener assembly configuration data from the hole data
License requirements: None.
- readAssemblyDefinition(String) - Method in interface nxopen.cae.connections.Composer
-
ReadAssemblyFromExcel
License requirements: nx_masterfem ("Finite Element Modeling")
.
- readAttributesFromWelds() - Method in interface nxopen.weld.ExportWeldBuilder
-
Read attributes from selected welds and save to exported attributes and connected part attributes
License requirements: ugweld ("UG WELD")
.
- readCell(String, String) - Method in interface nxopen.SpreadsheetManager
-
Reads value in a given cell, from a given spreadsheet.
- readConnectionsDB(String) - Method in interface nxopen.cae.connections.Composer
-
ReadConnectionsDB
License requirements: nx_masterfem ("Finite Element Modeling")
.
- readCustomColorsFromCdf(String) - Method in interface nxopen.uf.UFPlot
-
- readCustomWidthsFromWdf(String) - Method in interface nxopen.uf.UFPlot
-
- readData(String) - Method in interface nxopen.tooling.SpreadsheetData
-
Load the data from given spreadsheet file
License requirements: None.
- readData(NXObject) - Method in interface nxopen.tooling.SpreadsheetData
-
Load the data from part family part
License requirements: None.
- readDataSet() - Method in interface nxopen.features.shipdesign.ConceptFromSpreadsheetBuilder
-
Returns the Data Set Builder for reading data sets from Team Center
License requirements: None.
- readDataSet() - Method in interface nxopen.features.shipdesign.ShipIntersectionsBuilder
-
Returns the Data Set Builder for reading data sets from Team Center
License requirements: None.
- readDataSet() - Method in interface nxopen.features.shipdesign.ShipSectionBuilder
-
Returns the Data Set Builder for reading data sets from Team Center
License requirements: None.
- ReadDataSetBuilder - Interface in nxopen.features.shipdesign
-
This class will read a data set file from Team Center .
- readDeactivatedStates(NXObject, MotionSolution) - Method in interface nxopen.motion.MotionSimulation
-
Copies the deactivated states of motion objects occurrences belonging to a given
submechanism from a given solution to the motion assembly.
- readDfaFile(String) - Method in interface nxopen.RuleManager
-
Read a dfa file and return its contents as a string.
- readDimension(Tag, Tag) - Method in interface nxopen.uf.UFSket
-
- readDimensionalConstraint(Tag, Tag) - Method in interface nxopen.uf.UFSket
-
- ReadDimensionalConstraintData() - Constructor for class nxopen.uf.UFSket.ReadDimensionalConstraintData
-
- ReadDimensionData() - Constructor for class nxopen.uf.UFSket.ReadDimensionData
-
- readEdgePrepValues(Feature) - Method in interface nxopen.weld.EdgePrepValuesBuilder
-
Reads the edge prep values from the feature.
- readEdgePrepValues() - Method in interface nxopen.weld.JointItemBuilder
-
Read edge prep values set by the user plugin function.
- readEdgePrepValuesFromCurve(Curve) - Method in interface nxopen.weld.EdgePrepValuesBuilder
-
Reads the edge prep values from joint curve.
- READER - Static variable in class nxopen.linedesigner.ConveyorStationFeatureBuilder.Type
-
- READER - Static variable in class nxopen.mechatronics.ReadWriteDeviceBuilder.DeviceType
-
Reader
- readerType() - Method in interface nxopen.cae.SimLoadRecipeSource
-
- readFcadDatasetFiles() - Method in interface nxopen.linedesigner.FactoryCadGeoEquipmentAssemblyBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- readGeometricConstraint(Tag, Tag) - Method in interface nxopen.uf.UFSket
-
- ReadGeometricConstraintData() - Constructor for class nxopen.uf.UFSket.ReadGeometricConstraintData
-
- readingDirection() - Method in interface nxopen.preferences.SessionPmi
-
Returns the reading direction preference
License requirements: None.
- readInterfaceFromFile(String) - Method in interface nxopen.motion.MechatronicsBuilder
-
Reads the input/output definition of a mechatronics element from an external file, when purpose
is specified as Export.
- readLayerNumFromPrefix() - Method in interface nxopen.DxfdwgImporter
-
Returns the ReadLayerNumFromPrefix command - if set to true, layer numbers will be read from prefix
License requirements: None.
- readMacroInformation() - Method in interface nxopen.ame.ImportEplanPageMacroBuilder
-
Read device properties
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- readNamedRange(int, String) - Method in interface nxopen.SpreadsheetExternal
-
Reads a named range.
- readOneModeOrthogonalPair() - Method in interface nxopen.cae.PostResultPreference
-
Returns the read one mode from Orthogonal-pair toggle
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- readOnly - Variable in class nxopen.mechatronics.ParameterStockBuilder.BoolParameterData
-
- readOnly - Variable in class nxopen.mechatronics.ParameterStockBuilder.IntParameterData
-
- readOnly - Variable in class nxopen.mechatronics.ParameterStockBuilder.ListParameterData
-
- readOnly - Variable in class nxopen.mechatronics.ParameterStockBuilder.RealParameterData
-
- readOnly - Variable in class nxopen.mechatronics.ParameterStockBuilder.StringParameterData
-
- readOnlyString() - Method in interface nxopen.blockstyler.StringBlock
-
Returns the ReadOnlyString
License requirements: None.
- readOnlyValue() - Method in interface nxopen.blockstyler.DoubleBlock
-
Returns the ReadOnlyValue
License requirements: None.
- readOnlyValue() - Method in interface nxopen.blockstyler.IntegerBlock
-
Returns the ReadOnlyValue
License requirements: None.
- readPlantModel(ModelPlantRoot) - Method in interface nxopen.linedesigner.ModelPlantManager
-
Read Plant Model
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- readProjectTemplateSettings() - Method in interface nxopen.ame.EplanImportProjectTemplateBuilder
-
Read eplan project template settings
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- readRange(int, int, int, int, int) - Method in interface nxopen.SpreadsheetExternal
-
Reads the spreadsheet file and returns the data in the specified ranges
of the cells.
- readSectionDataFromDatabase() - Method in interface nxopen.tooling.RunnerBuilder
-
Read section data from runner section database.
- readSelectedSectionData(String) - Method in interface nxopen.tooling.RunnerBuilder
-
Reads selected section data from database.
- readSettingsFromFile(String) - Method in interface nxopen.sim.IsvControlPanelBuilder
-
Read simulation settings from xml file
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- readSuspensionTemplate(String) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
Read the file containing the suspension template points.
- readTabnotCell(Tag, int, int) - Method in interface nxopen.uf.UFDraw
-
- ReadTabnotCellData() - Constructor for class nxopen.uf.UFDraw.ReadTabnotCellData
-
- readTabnotColWdt(Tag, int) - Method in interface nxopen.uf.UFDraw
-
- readTabnotRowHgt(Tag, int) - Method in interface nxopen.uf.UFDraw
-
- readViewDrawingParameters(String) - Method in interface nxopen.uf.UFView
-
- ReadViewDrawingParametersData() - Constructor for class nxopen.uf.UFView.ReadViewDrawingParametersData
-
- ReadWriteDeviceBuilder - Interface in nxopen.mechatronics
-
- ReadWriteDeviceBuilder.DeviceType - Class in nxopen.mechatronics
-
the device types.
- ReadWriteDeviceBuilder.ExecuteMode - Class in nxopen.mechatronics
-
the execute modes.
- ReadWriteDeviceCollection - Interface in nxopen.mechatronics
-
Represents a collection of ReadWriteDevice.
- ReadWriteDeviceObject - Interface in nxopen.mechatronics
-
Represents the ReadWriteDeviceObject class.
- readWriteDevices() - Method in interface nxopen.mechatronics.PhysicsManager
-
- REAL - Static variable in class nxopen.ame.PlcDataType
-
- real() - Method in interface nxopen.annotations.BaseCustomSymbolBuilder
-
Returns the real value of selected text
License requirements: None.
- REAL - Static variable in class nxopen.annotations.MasterSymbolListItemBuilder.TextTypes
-
- REAL - Static variable in class nxopen.annotations.TextType
-
Specifies ther text defined in the master symbol as an real
constrained between maximum and minimum value.
- REAL - Static variable in class nxopen.assemblies.ComponentQuantity
-
Real quantity
- REAL - Static variable in class nxopen.cae.AfuData.OrdinateType
-
Ordinate Data is a single Real value
- real - Variable in class nxopen.cae.Complex
-
- REAL - Static variable in class nxopen.cae.Result.Complex
-
- REAL - Static variable in class nxopen.cae.xyplot.ComplexOption2D
-
Only the real part of the complex data for 2D plot
- REAL - Static variable in class nxopen.cae.xyplot.ComplexOption2DBarChart
-
Real part of the complex data for 2D bar chart plot
- REAL - Static variable in class nxopen.cae.xyplot.ComplexOption2DColorContour
-
Real part of the complex data for 2D color contour plot plot
- REAL - Static variable in class nxopen.cae.xyplot.ComplexOption3D
-
Real part of the complex data for 3D plot
- REAL - Static variable in class nxopen.cam.InspectionCmmCommandBuilder.VarTypes
-
Specifies a real variable
- REAL - Static variable in class nxopen.CGMBuilder.Vdc
-
Real
- REAL - Static variable in class nxopen.DxfdwgImporter.ImportDimensionsAs
-
Convert dimensions as real dimensions
- REAL - Static variable in class nxopen.features.DeformDefinitionBuilder.RangeType
-
Range of fractional numbers.
- REAL - Static variable in class nxopen.fields.DisplayPropertiesBuilder.ComplexScalarType
-
- REAL - Static variable in class nxopen.fields.FieldVariable.ValueType
-
real
- REAL - Static variable in class nxopen.mechatronics.ParameterStockBuilder.DataType
-
Real
- REAL - Static variable in class nxopen.NXObject.AttributeType
-
Real
- REAL - Static variable in class nxopen.options.OptionType
-
Option value is a real number
- REAL - Static variable in class nxopen.preferences.RoutingPartLibrary.ColumnType
-
Floating-point values.
- REAL - Static variable in class nxopen.routing.RoutePartDescriptor.CharxType
-
- REAL - Static variable in class nxopen.uistyler.StylerItem.ItemType
-
Real item
- REAL - Static variable in class nxopen.Validation.MapType
-
Real map
- REAL - Static variable in class nxopen.visualreporting.Property.DatatypeOption
-
Floating point data type
- REAL - Static variable in class nxopen.weld.WeldAttribType
-
real
- REAL_IMAGINARY - Static variable in class nxopen.cae.AfuData.OrdinateType
-
Ordinate Data is Complex with Real and Imaginary values
- REAL_IMAGINARY - Static variable in class nxopen.cae.xyplot.ComplexOption2D
-
Real and imaginary of the complex data for 2D plot
- REAL_IMAGINARY_PHASE - Static variable in class nxopen.cae.xyplot.ComplexOption2D
-
Real, imaginary and phase angle of the complex data for 2D plot
- REAL_ITEM - Static variable in class nxopen.uistyler.Dialog.ItemType
-
- REAL_POINTER_VALUE - Static variable in class nxopen.uistyler.StylerEvent.Indicator
-
Real pointer value
- REAL_SCALE - Static variable in class nxopen.uistyler.Dialog.ItemType
-
- REAL_TEXT - Static variable in class nxopen.uf.UFDrf.CustomSymbolTextType
-
- REAL_VALUE - Static variable in class nxopen.uistyler.StylerEvent.Indicator
-
Real value
- REAL_VDC - Static variable in class nxopen.uf.UFCgm.VdcMode
-
- RealData() - Constructor for class nxopen.cae.AfuData.RealData
-
- RealData() - Constructor for class nxopen.cae.ftk.ArrayRecord2D.RealData
-
- RealItem - Interface in nxopen.uistyler
-
Represents a Real for UI Styler .
- RealItem.Activate - Interface in nxopen.uistyler
-
Called when a dialog user enters a valid real value and presses Return.
- realOffset() - Method in interface nxopen.cae.AfuAbscissaHeaderInfo
-
Returns the abscissa offset for real part
License requirements: None.
- realOffset() - Method in interface nxopen.cae.AfuOrdinateHeaderInfo
-
Returns the offset for real part
License requirements: None.
- RealParameterData() - Constructor for class nxopen.mechatronics.ParameterStockBuilder.RealParameterData
-
- RealParameterData() - Constructor for class nxopen.mechatronics.TagTableBuilder.RealParameterData
-
- realParms - Variable in class nxopen.uf.UFDrf.GetXhatchParmsData
-
- realQuantity() - Method in interface nxopen.assemblies.AssembliesGeneralPropertiesBuilder
-
Returns the real quantity.
- realQuantity - Variable in class nxopen.assemblies.Component.RealQuantityData
-
Real quantity value
- realQuantity - Variable in class nxopen.assemblies.ComponentAssembly.RealQuantityData
-
Real quantity value
- RealQuantityData() - Constructor for class nxopen.assemblies.Component.RealQuantityData
-
- RealQuantityData() - Constructor for class nxopen.assemblies.ComponentAssembly.RealQuantityData
-
- realScale() - Method in interface nxopen.cae.AfuAbscissaHeaderInfo
-
Returns the abscissa scale for real part
License requirements: None.
- realScale() - Method in interface nxopen.cae.AfuOrdinateHeaderInfo
-
Returns the scale of real part
License requirements: None.
- RealScale - Interface in nxopen.uistyler
-
Represents a RealScale for UI Styler .
- RealScale.Drag - Interface in nxopen.uistyler
-
Called when a dialog user moves the slider to a new position.
- RealScale.ValueChanged - Interface in nxopen.uistyler
-
- RealSectionBasedMatrixRecord - Interface in nxopen.cae.ftk
-
Represents a section based matrix record which has real data values.
- RealSectionBasedMatrixRecord.SectionData - Class in nxopen.cae.ftk
-
- realTime - Variable in class nxopen.uf.UF.TimerValues
-
- realTimeType() - Method in interface nxopen.display.Shadows
-
Returns the Real Time Settings
License requirements: None.
- realValue() - Method in interface nxopen.annotations.CustomSymbolTextData
-
- realValue() - Method in interface nxopen.mechatronics.ProxyObjectParameterBuilder
-
Returns the real value of parameter attribute in proxy object
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- realValue - Variable in class nxopen.NXObject.AttributeInformation
-
Real attribute value (the default value is returned when reading templates of non-set attributes)
If the attribute has units, it is returned in the display units of the attribute
- reanalyzePairs(DisplayableObject[], DisplayableObject[], ClearanceSet.ReanalyzePairCalculationMethod) - Method in interface nxopen.assemblies.ClearanceSet
-
Reanalyze a set of interferences using the specified analysis method.
- REAPPLY_REV_RULE - Static variable in class nxopen.assemblies.ComponentAssembly.OpenOption
-
Reconfigure and open components based on current revision rules.
- REAR - Static variable in class nxopen.cam.ToolChangeCiBuilder.HeadDesignationTypes
-
Rear
- REAR - Static variable in class nxopen.features.vehicledesign.CrashBarrierBuilder.SideOverlapSideType
-
- REAR - Static variable in class nxopen.features.vehicledesign.DynamicCurbBuilder.PositionType
-
- REAR - Static variable in class nxopen.features.vehicledesign.GroundClearanceBuilder.PositionType
-
- REAR - Static variable in class nxopen.features.vehicledesign.OilPanBuilder.PositionType
-
- REAR - Static variable in class nxopen.features.vehicledesign.PendulumPlacementBuilder.LocationType
-
- REAR - Static variable in class nxopen.features.vehicledesign.SlopeBuilder.PositionType
-
- REAR - Static variable in class nxopen.features.vehicledesign.StaticCurbBuilder.PositionType
-
Rear
- REAR - Static variable in class nxopen.features.vehicledesign.WheelCoveringBuilder.PositionType
-
Creates checking surface for rear wheel only
- REAR - Static variable in class nxopen.features.vehicledesign.WheelFixingBuilder.PositionType
-
- REAR_PASSENGER - Static variable in class nxopen.HumanPosturePredictionBuilder.OccupantType
-
Indicate Rear passenger
- rearAngle() - Method in interface nxopen.features.vehicledesign.SlopeBuilder
-
Returns the expression containing the rear angle.
- rearAngle() - Method in interface nxopen.features.vehicledesign.StaticCurbBuilder
-
Returns the expression containing the rear angle.
- rearBottomOffset() - Method in interface nxopen.features.vehicledesign.WheelCoveringBuilder
-
- rearClearance() - Method in interface nxopen.features.vehicledesign.WheelCoveringBuilder
-
Returns the clearance of the rear surface section.
- rearCollector() - Method in interface nxopen.features.vehicledesign.BumperPendulumBuilder
-
Returns the selected rear body.
- rearCrossPosition() - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder
-
Returns the cross position type of rear barrier.
- rearDisToWheelCenter() - Method in interface nxopen.features.vehicledesign.WheelCoveringBuilder
-
- rearFacetBodies() - Method in interface nxopen.features.vehicledesign.BumperPendulumBuilder
-
Returns the selected rear facet body.
- rearFrontAngle() - Method in interface nxopen.features.vehicledesign.WheelCoveringBuilder
-
Returns the front angle of the rear surface section.
- rearFrontOffset() - Method in interface nxopen.features.vehicledesign.WheelCoveringBuilder
-
- rearHeaderFeature() - Method in interface nxopen.features.vehicledesign.HeadImpactBuilder
-
Returns the rear header feature for this head impact study.
- rearHeadRestGeometry() - Method in interface nxopen.features.vehicledesign.AllAroundVisionBuilder
-
Returns the faces representing the rear head rest geometry to use as obstructing elements.
- rearHeight() - Method in interface nxopen.features.vehicledesign.WheelCoveringBuilder
-
- rearHeightAboveRoad() - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder
-
Returns the expression containing the height above road value of rear barrier.
- rearHubcapSelection() - Method in interface nxopen.features.vehicledesign.WheelCoveringBuilder
-
Returns the rear hub cap selection.
- rearInnerLength() - Method in interface nxopen.features.vehicledesign.DynamicCurbBuilder
-
Returns the expression defining the length of the inner line in rear for dynamic curb.
- rearInnerOffset() - Method in interface nxopen.features.vehicledesign.DynamicCurbBuilder
-
Returns the expression defining the value of inner offset in rear for dynamic curb.
- rearLoading() - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder
-
Returns the loading applied to the vehicle rear used in the crash barrier.
- rearLoading() - Method in interface nxopen.features.vehicledesign.SlopeBuilder
-
Returns the loading applied to the vehicle rear used in the slope.
- rearLoading() - Method in interface nxopen.features.vehicledesign.StaticCurbBuilder
-
Returns the loading applied to the vehicle rear used in the static curb.
- rearMeasuredFaces() - Method in interface nxopen.features.vehicledesign.StaticCurbBuilder
-
Returns the selected rear faces for measurement.
- rearObjects() - Method in interface nxopen.features.vehicledesign.SlopeBuilder
-
Returns the selected rear faces for slope measurement.
- rearObjectSelection() - Method in interface nxopen.features.vehicledesign.WheelCoveringBuilder
-
Returns the rear object selection.
- rearOffset() - Method in interface nxopen.features.vehicledesign.StaticCurbBuilder
-
Returns the expression containing the rear offset.
- rearOffsetValue() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
Returns the expression containing the offset value of the rear section(at 180 degrees).
- rearOuterOffset() - Method in interface nxopen.features.vehicledesign.DynamicCurbBuilder
-
Returns the expression defining the value of outer offset in rear for dynamic curb.
- rearOverhangExp() - Method in interface nxopen.features.vehicledesign.BaseDataBuilder
-
Returns the rear overhang of the vehicle which is measured from the rear wheel center point in the positive x direction.
- rearOverlapPercentage() - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder
-
Returns the expression containing the user defined width value of rear barrier.
- rearOverlapSide() - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder
-
Returns the overlap side type of rear barrier.
- rearPositionObject() - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder
-
Returns the user defined position object type of rear barrier.
- rearRadius() - Method in interface nxopen.features.vehicledesign.WheelCoveringBuilder
-
- rearRearAngle() - Method in interface nxopen.features.vehicledesign.WheelCoveringBuilder
-
Returns the rear angle of the rear surface section.
- rearRearOffset() - Method in interface nxopen.features.vehicledesign.WheelCoveringBuilder
-
- rearReferenceStepDistance() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the distance between rear reference sections used in the analysis
License requirements: None.
- rearSelector() - Method in interface nxopen.features.vehicledesign.DynamicCurbBuilder
-
Returns the faces representing the rear car body geometry for the measurement.
- rearSelectPositioningFacetBodies() - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder
-
Returns the user defined position facet objects of rear barrier.
- rearSelectPositioningObject() - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder
-
Returns the user defined position objects of rear barrier.
- rearShape() - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder
-
Returns the shape type of rear barrier.
- rearshieldEdge() - Method in interface nxopen.features.vehicledesign.HeadImpactRearHeaderWizardBuilder
-
Returns the rear door or daylight opening upper edge geometry.
- rearShift() - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder
-
Returns the expression containing the shift value of rear barrier.
- rearShoulderRoom() - Method in interface nxopen.features.vehicledesign.BaseDataDriverBuilder
-
Returns the rear shoulder room.
- rearSurfacePlane() - Method in interface nxopen.features.vehicledesign.WheelCoveringBuilder
-
Returns the surface plane type of the rear surface section.
- rearSurfaceSection() - Method in interface nxopen.features.vehicledesign.WheelCoveringBuilder
-
Returns the surface section type of the rear surface section.
- rearUnderAxleFace() - Method in interface nxopen.features.vehicledesign.GroundClearanceBuilder
-
Returns the faces representing the car body geometry for measuring distance to the rear under axle surface.
- rearUserDefineWidth() - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder
-
Returns the user defined width type of rear barrier.
- rearUserDefineWidthValue() - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder
-
Returns the expression containing the user defined width value of rear barrier.
- rearWheel() - Method in interface nxopen.features.vehicledesign.BaseDataLoadingBuilder
-
Returns the rear wheel data of this loading.
- rearWindowTrim() - Method in interface nxopen.features.vehicledesign.HeadImpactUpperRoofWizardBuilder
-
Returns the rear window trim geometry.
- reason - Variable in class nxopen.assemblies.ClearanceAnalysisBuilder.IsPairIncludedData
-
the reason
- reason - Variable in class nxopen.features.shipdesign.PenetrationUtils.Verify_penetrationsData
-
- reason() - Method in interface nxopen.features.SketchConversionStatus
-
Returns the reason for failed or partially succeeded conversion of a linked-feature to
an independent sketch
License requirements: None.
- reason() - Method in interface nxopen.routing.DesignRuleOverride
-
Returns the reason of the design rule override is returned
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- reason - Variable in class nxopen.uf.UFAssem.Prev16Align
-
- reason - Variable in class nxopen.uf.UFCgm.ExportOptions
-
- reason - Variable in class nxopen.uf.UFClear.IsPairIncludedData
-
- reason - Variable in class nxopen.uf.UFNcgroup.CanAcceptMemberData
-
- reason - Variable in class nxopen.uf.UFUgmgr.ValidateAlternatePartIdData
-
- reason() - Method in interface nxopen.validate.OverrideBuilder
-
Returns the reason of override request.
- reasonExecuteRule(DesignRuleViolationCollection.Mode, DesignRuleViolationCollection.Reason, NXObject[]) - Method in interface nxopen.routing.DesignRuleViolationCollection
-
Executes design rules and returns all the violations of the rule
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- reasons - Variable in class nxopen.uf.UFWeight.Exceptions
-
- reassembleTireBodyComponent() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
Re-assemble the part containing the tire body defining tire profile to work part as the moving component
used for the clearance analysis.
- reassignComponentsFromLogicalConnection(Component, NXObject, NXObject) - Method in interface nxopen.mechanicalrouting.LogicalDesignService
-
Reassigns all the components from a source logical connection object to a destination logical connection object or run object.
- reassignComponentsToRun(Component[], NXObject) - Method in interface nxopen.mechanicalrouting.LogicalDesignService
-
Reassigns a list of
Component
mapping to a destination run object.
- reassignEdge() - Method in interface nxopen.weld.ConnectionFinderBuilder
-
Returns the edges to use when the reassign button is invoked.
- reassignEdgeNode(NXObject, NXObject) - Method in interface nxopen.weld.ConnectionFinderBuilder
-
Reassign the edges from the Reassign Edge collector to the specified node.
- ReassignElementsBuilder - Interface in nxopen.cae
-
- ReassignElementsBuilder.ElementDimensionOption - Class in nxopen.cae
-
Indicates the different element dimensions
- ReassignElementsBuilder.ElementTypeOption - Class in nxopen.cae
-
Indicates the element types for each dimension.
- reassignFace() - Method in interface nxopen.weld.ConnectionFinderBuilder
-
Returns the faces to use when the reassign button is invoked.
- reassignFaceNode(NXObject, NXObject) - Method in interface nxopen.weld.ConnectionFinderBuilder
-
Reassign the faces from the Reassign Face collector to the specified node.
- reassignOnSegments() - Method in interface nxopen.routing.BranchPathNumberingBuilder
-
Returns the toggle specified in the UI on whether to reassign the labels
License requirements: routing_hvac ("Routing HVAC")
.
- reassignPositionNumbers() - Method in interface nxopen.features.shipdesign.ManufacturingPreparationBuilder
-
Returns the reassign position numbers toggle
License requirements: None.
- reassociateLeader() - Method in interface nxopen.drafting.CutCopyPasteLeaderBuilder
-
Returns the flag to reassociate a leader
License requirements: None.
- reattach(ISurface, IReferenceAxis, Vector3d, AxisOrientation, Sense, PlaneNormalOrientation, Point3d) - Method in interface nxopen.Sketch
-
- reattachDirRef(Tag, Tag, int, boolean) - Method in interface nxopen.uf.UFModeling
-
- reattachTargetFace(Tag, Tag, double[], int, boolean) - Method in interface nxopen.uf.UFModeling
-
- reattachThruFaces(Tag, int, Tag[], boolean) - Method in interface nxopen.uf.UFModeling
-
- reattachToolFace(Tag, Tag, boolean) - Method in interface nxopen.uf.UFModeling
-
- rebase() - Method in interface nxopen.features.shipdesign.RebaseBuilder
-
Loops through all the parts and rebases the manufacturing end cut parameters to the values of the corresponding design end cut
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- RebaseBuilder - Interface in nxopen.features.shipdesign
-
This class is used to synchronize the end cuts from the ones in mfg group to design group.
- rebaseOriginalGeometry(NXObject) - Method in interface nxopen.features.StudioXformBuilderEx
-
Replaces the original geometry data of an entity with the current deformed geometry data
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- Rebend - Interface in nxopen.features
-
Represents a Rebend feature
To create or edit an instance of this class, use
RebendBuilder
Created in NX5.0.0
- REBEND - Static variable in class nxopen.tooling.BendOperationBuilder.Types
-
rebend operation
- REBEND - Static variable in class nxopen.tooling.DirectUnbendBuilder.Bendtypes
-
rebend operation
- RebendBuilder - Interface in nxopen.features.sheetmetal
-
The Rebend feature class.
- ReblendFace() - Constructor for class nxopen.uf.UFModl.ReblendFace
-
- ReblendFace(boolean, int, Tag[]) - Constructor for class nxopen.uf.UFModl.ReblendFace
-
- ReblendFaceData() - Constructor for class nxopen.uf.UFModl.ReblendFaceData
-
- ReblendFaceData(int, String, UFModl.ReblendFace[]) - Constructor for class nxopen.uf.UFModl.ReblendFaceData
-
- reboundDampingFactorExpression() - Method in interface nxopen.motion.BodyContactRecurdyn
-
Returns the rebound Damping Factor expression
License requirements: None.
- reboundDampingFactorFlag() - Method in interface nxopen.motion.BodyContactRecurdyn
-
Returns the rebound Damping Factor Flag
License requirements: None.
- reboundDistance() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
Returns the rebound distance that is used for the Five Link Solid Axle without steering suspension template.
- rebuild() - Method in interface nxopen.cam.Topology
-
The action of rebuild topology data
License requirements: cam_base ("CAM BASE")
.
- rebuild() - Method in interface nxopen.features.BridgeSurfaceBuilder
-
Returns the surface rebuild data
License requirements: None.
- rebuild() - Method in interface nxopen.features.LawExtensionBuilder
-
Returns the rebuild data.
- rebuild() - Method in interface nxopen.features.SectionSurfaceBuilderEx
-
Returns the rebuild.
- Rebuild - Interface in nxopen.geometricutilities
-
- Rebuild.DegreeTypes - Class in nxopen.geometricutilities
-
This enum represents the degree type when the Rebuild option menu is set to None.
- Rebuild.RebuildTypes - Class in nxopen.geometricutilities
-
This enum represents the Rebuild type.
- rebuildAdjacencies(Tag) - Method in interface nxopen.uf.UFFacet
-
- rebuildData() - Method in interface nxopen.features.MeshSurfaceBuilder
-
Returns
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- rebuildGuide() - Method in interface nxopen.features.StyledBlendBuilder
-
Returns the rebuild guide
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- rebuildTrees() - Method in interface nxopen.RuleManager
-
Rebuilds the KF Navigator tree and any Part Inspector trees that are being shown.
- rebuildType() - Method in interface nxopen.geometricutilities.Rebuild
-
Returns the rebuild type.
- recalculate() - Method in interface nxopen.Spreadsheet
-
Recalculates the spreadsheet.
- recalculateData(FeedsBuilder.RecalcuateBasedOn) - Method in interface nxopen.cam.FeedsBuilder
-
Recalculate speeds and feeds
License requirements: cam_base ("CAM BASE")
.
- recalculateLimits() - Method in interface nxopen.features.MasterCutBuilder
-
Recalculates extrude limits to cut through target components
License requirements: solid_modeling ("SOLIDS MODELING")
.
- RECALL_PCS - Static variable in class nxopen.cam.InspectionAlignmentBuilder.AlignTypes
-
Recall previously saved PCS
- recallAndListConstraints() - Method in interface nxopen.assemblies.Component
-
Recalls the
ComponentConstraint
s previously remembered on the part
of this component, creating new constraints from them.
- recallConstraints() - Method in interface nxopen.assemblies.Component
-
Recalls the
ComponentConstraint
s previously remembered on the part
of this component, creating new constraints from them.
- recallCsys() - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
Returns the recall csys
License requirements: None.
- recallDid() - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
Returns the recall device id
License requirements: None.
- recallExtName() - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
Returns the recall external name
License requirements: None.
- recallIntName() - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
Returns the recall internal name
License requirements: None.
- recallState() - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
Returns the recall state
License requirements: None.
- recaptureSnapshot(String, String) - Method in interface nxopen.issue.IssueAttachment
-
Recapture the snapshot
License requirements: nx_issue_mgmt ("NX Issue Tracking")
.
- receiverID() - Method in interface nxopen.IgesCreator
-
Returns the receiver id
License requirements: None.
- receptacleType() - Method in interface nxopen.ame.MountingInterfaceBuilder
-
- RECEPTANCE - Static variable in class nxopen.cae.responsesimulation.EvaluationResultType
-
- recipe() - Method in interface nxopen.assemblies.SubsetBuilder
-
Returns the
SubsetRecipe
that contains the
SearchTerm
s
used to generate the contents of the subset
Created in NX8.5.0
- recipe() - Method in interface nxopen.cae.AutoBCBuilder
-
- recipe() - Method in interface nxopen.features.GeodesicResetBuilder
-
Returns the recipe curve to reset
License requirements: None.
- RECIPE_TRIM - Static variable in class nxopen.Sketch.ConstraintType
-
- RECIPE_TRIM - Static variable in class nxopen.uf.UFSket.ConType
-
- RecipeConvexMesh - Interface in nxopen.cae
-
Represents a convex mesh.
- recipeCurves() - Method in interface nxopen.SketchAssociativeTrimBuilder
-
Returns the input curves.
- recipeName() - Method in interface nxopen.cae.SimRecipe
-
Returns the name of the recipe object
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- RecipeOpenDuctMesh - Interface in nxopen.cae
-
Represents a open duct mesh.
- RecipeSurfaceWrap - Interface in nxopen.cae
-
Represents 2d mesh associated to fluid domain body, all from surface wrapper.
- recognitionType() - Method in interface nxopen.cam.FeatureRecognitionBuilder
-
Returns the type of feature search
License requirements: None.
- recognizeBlends(Face[]) - Method in interface nxopen.modldirect.SelectBlend
-
Auto regonize the adjacent blends of input base faces
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- recognizeCoaxial(boolean) - Method in interface nxopen.features.FaceRecognitionBuilder
-
Recognizes coaxial relations to last faces added to face collector
License requirements: gateway ("UG GATEWAY")
.
- recognizeCoplanar(boolean) - Method in interface nxopen.features.FaceRecognitionBuilder
-
Recognizes coplanar relations to last faces added to face collector
License requirements: gateway ("UG GATEWAY")
.
- recognizeCoplanarAxes(boolean) - Method in interface nxopen.features.FaceRecognitionBuilder
-
Recognizes coplanar axes relations to last faces added to face collector
License requirements: gateway ("UG GATEWAY")
.
- recognizeEqualDiameter(boolean) - Method in interface nxopen.features.FaceRecognitionBuilder
-
Recognizes equal diameter relations to last faces added to face collector
License requirements: gateway ("UG GATEWAY")
.
- recognizeFlatOption() - Method in interface nxopen.cam.DmAmBuilder
-
Returns the Recognize Flat Option
License requirements: None.
- recognizeHoles(Tag[], int, String[], int, UFMfm.RecognizeOptions) - Method in interface nxopen.uf.UFMfm
-
- RecognizeHolesData() - Constructor for class nxopen.uf.UFMfm.RecognizeHolesData
-
- recognizeOffset(boolean) - Method in interface nxopen.features.FaceRecognitionBuilder
-
Recognizes offset relations to last faces added to face collector
License requirements: gateway ("UG GATEWAY")
.
- RecognizeOptions() - Constructor for class nxopen.uf.UFMfm.RecognizeOptions
-
- RecognizeOptions(boolean) - Constructor for class nxopen.uf.UFMfm.RecognizeOptions
-
- recognizeParallel(boolean) - Method in interface nxopen.features.FaceRecognitionBuilder
-
Recognizes parallel relations to last faces added to face collector
License requirements: gateway ("UG GATEWAY")
.
- recognizePerpendicular(boolean) - Method in interface nxopen.features.FaceRecognitionBuilder
-
Recognizes perpendicular relations to last faces added to face collector
License requirements: gateway ("UG GATEWAY")
.
- recognizeRigid(NXObject) - Method in interface nxopen.features.CurveFinderBuilder
-
Recognize rigid from the recognized relation
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- recognizeSymmetric(boolean) - Method in interface nxopen.features.FaceRecognitionBuilder
-
Recognizes symmetric relations to last faces added to face collector
License requirements: gateway ("UG GATEWAY")
.
- recognizeTangent(boolean) - Method in interface nxopen.features.FaceRecognitionBuilder
-
Recognizes tangent relations to last faces added to face collector
License requirements: gateway ("UG GATEWAY")
.
- recognizeThicknessChain(boolean) - Method in interface nxopen.features.FaceRecognitionBuilder
-
Recognizes thickness chain relations to last faces added to face collector
License requirements: gateway ("UG GATEWAY")
.
- recommendedshapelargeimagenames - Variable in class nxopen.uf.UFModl.ShapePatternClientDialogData
-
- recommendedshapenames - Variable in class nxopen.uf.UFModl.ShapePatternClientDialogData
-
- recommendedshapethumbnailimagenames - Variable in class nxopen.uf.UFModl.ShapePatternClientDialogData
-
- reconnectConnection(Sheet, Connection, AMEExtendedObject, int) - Method in interface nxopen.ame.DiagramManager
-
Reconnect Diagramming Connection
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- RECORD_DISPLAY - Static variable in class nxopen.cae.xyplot.ModelType
-
- recordAllTransform() - Method in interface nxopen.preferences.SessionUserInterfaceUI
-
Returns the record all transform flag
License requirements: None.
- recordCount() - Method in interface nxopen.cae.xyplot.Graph
-
Returns the record count of the graph.
- recordDraftObjects(boolean) - Method in interface nxopen.uf.UFDrf
-
- recordFeatureUpdateWarnings(boolean) - Method in interface nxopen.uf.UFModeling
-
- recordIndex - Variable in class nxopen.cae.FunctionBuilder.TableData
-
Begins with one
- recordIndex() - Method in interface nxopen.cae.xyplot.MarkerModel
-
Returns the record index of marker model.
- recordName() - Method in interface nxopen.cae.AfuData
-
Returns the name of the AFU Data Record
License requirements: None.
- recordName - Variable in class nxopen.cae.ftk.OptionSetting.RecordOptionData
-
The name of the AFU Data Record
- recordName - Variable in class nxopen.cae.FunctionBuilder.TableData
-
- recordNetlistHistory() - Method in interface nxopen.preferences.RoutingElectrical
-
Returns the option to record import and export activity in the Connection and Component Lists.
- recordNumber - Variable in class nxopen.uf.UFDrf.SymbolInstance
-
- RecordOptionData() - Constructor for class nxopen.cae.ftk.OptionSetting.RecordOptionData
-
- recordPrefix() - Method in interface nxopen.cae.responsesimulation.DynamicEvaluationOutputSettings
-
Returns the prefix of evaluation results record name
License requirements: nx_response_anlys ("NX Response Analysis")
.
- recordPrefix() - Method in interface nxopen.cae.responsesimulation.FunctionEvaluationOutputSettings
-
Returns the prefix of evaluation results record name
License requirements: nx_response_anlys ("NX Response Analysis")
.
- recordReusableComponent(String) - Method in interface nxopen.tooling.AddReusablePart
-
Records the existing reusable component with the same name
License requirements: None.
- recordTimestamp - Variable in class nxopen.cae.AfuManager.AfuRecordData
-
Time stamp string indicates the last time the AFU Data Record was edited
- recordTimestamp - Variable in class nxopen.cae.FunctionBuilder.TableData
-
A time string indicating the last creating or editing time of an afu record
- recordTransientMeshes() - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
Record the transient meshes.
- recreateCurves() - Method in interface nxopen.weld.EdgePrepValuesBuilder
-
Recreates the curves after changes to edge prep values.
- recreateDeletedWelds() - Method in interface nxopen.weld.WeldGrooveBuilder
-
Returns a value indicating whether to recreate deleted welds
License requirements: ugweld ("UG WELD")
.
- recreateFeatureProcesses(FeatureGeometryGroup[]) - Method in interface nxopen.cam.FeatureProcessBuilder
-
Creates operations for a set of features based of the current setting of the builder
License requirements: ug_holemaking ("UG Holemaking")
.
- RecreateFeatureProcessesData() - Constructor for class nxopen.cam.FeatureProcessBuilder.RecreateFeatureProcessesData
-
- recreateHoleSeries(NXObject, NXObject) - Method in interface nxopen.tooling.ReusablePocketBuilder
-
Recreates hole series if hole feature is updated.
- recreateSectionCurve() - Method in interface nxopen.features.EditCrossSectionBuilder
-
Recreate the section curves.
- recreateSections() - Method in interface nxopen.die.AddendumSectionBuilder
-
Re-create all existing sections because of a change in the draw direction or product faces.
- recreateStockComponents() - Method in interface nxopen.routing.RouteManager
-
Regenerates the stock components in the assembly.
- recreateStockComponentsOption() - Method in interface nxopen.routing.StockPartConverterBuilder
-
Returns the recreate StockComponents option.
- recreateVectorOfHelpDirVector() - Method in interface nxopen.features.ExtractFaceBuilder
-
Causes the recreation of vector for help dir
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- RECTANGLE - Static variable in class nxopen.cam.TurnToolBuilder.InsertShapes
-
Insert shape: Rectangle
- RECTANGLE - Static variable in class nxopen.diagramming.DiagrammingAnnotationboundarytype
-
Rectangle Type
- RECTANGLE - Static variable in class nxopen.display.NonProportionalZoom.MethodType
-
Uses a rectangular region to be zoomed.
- RECTANGLE - Static variable in class nxopen.display.SelPref.MouseGesture
-
multi-select using rectangle
- RECTANGLE - Static variable in class nxopen.features.subdivision.SubdivisionPrimitiveShapeBuilder.Types
-
Deprecated.
- RECTANGLE - Static variable in class nxopen.features.subdivision.SubdivisionPrimitiveShapeBuilderEx.Types
-
- RECTANGLE - Static variable in class nxopen.features.vehicledesign.CloseRangeCameraListItemBuilder.Types
-
Rectangle type
- RECTANGLE - Static variable in class nxopen.features.vehicledesign.MirrorCertificationBuilder.InstructionFieldsType
-
Represents that the rectangle Instruction field will be created
- RECTANGLE - Static variable in class nxopen.geometricutilities.QuadrilateralFrameBuilder.Subtypes
-
Rectangle
- RECTANGLE - Static variable in class nxopen.linedesigner.ColumnFeatureBuilder.ColumnBaseType
-
- RECTANGLE - Static variable in class nxopen.linedesigner.ColumnFeatureBuilder.ColumnType
-
- RECTANGLE - Static variable in class nxopen.linedesigner.ColumnGridEquipmentBuilder.ColumnBaseType
-
- RECTANGLE - Static variable in class nxopen.linedesigner.ColumnGridEquipmentBuilder.ColumnType
-
- RECTANGLE - Static variable in class nxopen.linedesigner.RailingFeatureBuilder.RailCrossStyle
-
- RECTANGLE - Static variable in class nxopen.linedesigner.RailingFeatureBuilder.SelPostcrossStyle
-
- Rectangle - Interface in nxopen.markup
-
- rectangle - Variable in class nxopen.Selection.SelectionDescriptor
-
- RECTANGLE - Static variable in class nxopen.tooling.BlankNestingBuilder.LayoutTypeSpecification
-
Auto-position blank along x-axis with rectangle bounding box.
- RECTANGLE - Static variable in class nxopen.tooling.DieCavityAndSlugHoleBuilder.BottomPlateSlugItems
-
Bottom plate slug type is rectangle
- RECTANGLE - Static variable in class nxopen.tooling.DieCavityAndSlugHoleBuilder.DiePlateThreeSlugType
-
- RECTANGLE - Static variable in class nxopen.tooling.DieCavityAndSlugHoleBuilder.DiePlateTwoSlugType
-
- RECTANGLE - Static variable in class nxopen.tooling.DieCavityAndSlugHoleBuilder.DieShoeSlugTypeItems
-
Die shoe slug type is rectangle
- RECTANGLE - Static variable in class nxopen.tooling.LayoutBuilder.LayoutType
-
Rectangle layout
- RECTANGLE - Static variable in class nxopen.tooling.LsdynaGeometryPreparationBuilder.DrawBeadType
-
Draw bead section has rectangle shape.
- RECTANGLE - Static variable in class nxopen.tooling.PiercingInsertBuilder.NormalBbpslugType
-
Bottom plate slug type is rectangle
- RECTANGLE - Static variable in class nxopen.tooling.PiercingInsertBuilder.NormalDsslugType
-
Die shoe slug type is rectangle
- RECTANGLE - Static variable in class nxopen.tooling.SpecialPiercingInsertBuilder.NormalBottomBackingPlateSlugType
-
Bottom backing plate slug type is rectangle
- RECTANGLE - Static variable in class nxopen.tooling.SpecialPiercingInsertBuilder.NormalDieShoeSlugType
-
Die shoe slug type is rectangle
- RECTANGLE - Static variable in class nxopen.weld.WeldBeadBuilder.Types
-
rectangle shape
- RECTANGLE - Static variable in class nxopen.weld.WeldFillBuilder.BoundaryMethodType
-
Boundary defined by a two point rectangle.
- Rectangle.CenterLengthAndWidthData - Class in nxopen.markup
-
- RECTANGLE_BY_CENTER_AND_CORNER - Static variable in class nxopen.drawings.DetailViewBuilder.Types
-
Rectangular boundary defined by the center and a corner
- RECTANGLE_BY_CORNERS - Static variable in class nxopen.drawings.DetailViewBuilder.Types
-
Rectangular boundary defined by two corners
- RECTANGLE_POSITION - Static variable in class nxopen.Selection.UistylerSelectionType
-
the position is returned if no object is selected with the
single select gesture
- rectangleBase() - Method in interface nxopen.weld.WeldBeadSizeBuilder
-
Returns the base length of a rectangle shaped bead.
- rectangleHeight() - Method in interface nxopen.weld.WeldBeadSizeBuilder
-
Returns the height of a rectangle shaped bead.
- rectangleLayer() - Method in interface nxopen.features.SectionInertiaAnalysisBuilder
-
Returns the rectangle layer
License requirements: None.
- rectanglePointFirst() - Method in interface nxopen.features.NSidedSurfaceBuilder
-
Returns the first rectangle point.
- rectanglePointSecond() - Method in interface nxopen.features.NSidedSurfaceBuilder
-
Returns the second rectangle point.
- rectanglePointThird() - Method in interface nxopen.features.NSidedSurfaceBuilder
-
Returns the third rectangle point.
- rectanglePosition - Variable in class nxopen.Selection.SelectionDescriptor
-
- RECTANGULAR - Static variable in class nxopen.annotations.DatumTargetBuilder.Types
-
rectangular
- RECTANGULAR - Static variable in class nxopen.annotations.FeatureControlFrameDataBuilder.AreaSymbolType
-
Rectangular
- RECTANGULAR - Static variable in class nxopen.annotations.SearchCriteriaDatumTargetBuilder.DatumTargetTypes
-
rectangular type
- RECTANGULAR - Static variable in class nxopen.cae.connections.ConnectionDBItemStiffnessType
-
Rectangular
- RECTANGULAR - Static variable in class nxopen.cae.DurabilityStrainGageAnalyzerBuilder.GageTypeEnum
-
Rectangular
- RECTANGULAR - Static variable in class nxopen.die.KeywayBuilder.Types
-
tool runoff is perpendicular to slot
- RECTANGULAR - Static variable in class nxopen.die.KeywayChildBuilder.RunoffTypeOption
-
Rectangular runoff.
- RECTANGULAR - Static variable in class nxopen.die.KeywayParentBuilder.RunoffTypeOption
-
Rectangular runoff.
- RECTANGULAR - Static variable in class nxopen.die.PadChildBuilder.ShapeTypeOption
-
Rectangular pad.
- RECTANGULAR - Static variable in class nxopen.die.PadParentBuilder.ShapeTypeOption
-
Rectangular pad.
- RECTANGULAR - Static variable in class nxopen.die.PierceHoleChildBuilder.ShapeTypeOption
-
rectangular hole
- RECTANGULAR - Static variable in class nxopen.die.PierceItemBuilder.HoleShapeType
-
Rectangular shaped hole
- rectangular() - Method in interface nxopen.die.RibChildBuilder
-
Returns the rectangular switch of the die rib, if true the lightening core will be rectangular,
if false it will follow the shape of the rib.
- rectangular() - Method in interface nxopen.die.RibParentBuilder
-
Returns the rectangular switch of die ribs, if true the lightening cores will be rectangular,
if false they will follow the shape of the rib.
- RECTANGULAR - Static variable in class nxopen.features.PatternFaceBuilder.PatternTypes
-
This stands for rectangular pattern type.
- RECTANGULAR - Static variable in class nxopen.features.shipdesign.PenetrationRequest.CoutoutType
-
- RECTANGULAR - Static variable in class nxopen.features.shipdesign.SeamBuilder.DefinitionMethods
-
Create a rectangular pattern of seams based on an origin, direction, and size of rectangles.
- RECTANGULAR - Static variable in class nxopen.MeasureManager.ExtremeType
-
- RECTANGULAR - Static variable in class nxopen.mechanicalrouting.PathStockPreferenceBuilder.AssignMethod
-
Deprecated.
User specified values, creates rectangular
space reservation stock.
- RECTANGULAR - Static variable in class nxopen.mechanicalrouting.PathStockPreferenceBuilder.SpaceReservationMethod
-
User specified values, creates rectangular
space reservation stock.
- RECTANGULAR - Static variable in class nxopen.preferences.DetailBoundaryOption
-
Rectangular boundary
- RECTANGULAR - Static variable in class nxopen.preferences.WorkPlane.Grid
-
Rectangular Grid
- RECTANGULAR - Static variable in class nxopen.routing.CustomManager.DuctSizeCalculatorDuctShape
-
- RECTANGULAR - Static variable in class nxopen.routing.DuctSizeCalculatorBuilder.DuctShapeType
-
- RECTANGULAR - Static variable in class nxopen.routing.electrical.ElectricalStockDefinition.SectionType
-
- RECTANGULAR - Static variable in class nxopen.routing.PathStockBuilder.AssignMethod
-
User specified values, creates rectangular
space reservation stock.
- RECTANGULAR - Static variable in class nxopen.tooling.BomBuilder.Shape
-
The rectangular type.
- RECTANGULAR - Static variable in class nxopen.tooling.DieDesPierceInsertBuilder.HoleShapeTypes
-
- RECTANGULAR_ARRAY - Static variable in class nxopen.cam.InspectionOperationTransformBuilder.Transform
-
rectangular array
- RECTANGULAR_ARRAY - Static variable in class nxopen.cam.OperationTransformBuilder.Transform
-
rectangular array
- RECTANGULAR_CUTOUT - Static variable in class nxopen.features.sheetmetal.ClosedCornerBuilder.TreatmentTypeOptions
-
Rectangular shaped relief
- RECTANGULAR_EXTREME - Static variable in class nxopen.GenericMeasure.Type
-
- RECTANGULAR_GRID - Static variable in class nxopen.uf.UFDisp.GridType
-
- RECTANGULAR_JOUNCE_REBOUND - Static variable in class nxopen.features.vehicledesign.TireEnvelopeBuilder.DriverGraphOption
-
Use the rectangular jounce rebound definition.
- RECTANGULAR_PATTERN - Static variable in class nxopen.uf.UFGdt.PatternType
-
- RECTANGULAR_REGION - Static variable in class nxopen.annotations.RegionBuilder.Types
-
rectangular
- RECTANGULAR_REGION - Static variable in class nxopen.uf.UFGdt.GeometricDefinitionType
-
- RECTANGULAR_SLOT - Static variable in class nxopen.uf.UFModl.SlotType
-
- RECTANGULAR_TAPERED_X - Static variable in class nxopen.features.vehicledesign.TireEnvelopeBuilder.DriverGraphOption
-
Use the rectangular definition with taper in the X direction.
- RECTANGULAR_TAPERED_Y - Static variable in class nxopen.features.vehicledesign.TireEnvelopeBuilder.DriverGraphOption
-
Use the rectangular definition with taper in the Y direction.
- RECTANGULAR_TYPE - Static variable in class nxopen.tooling.ScrapDesignBuilder.OvercutType
-
Creates rectangular type of overcut
- rectangularDefinition() - Method in interface nxopen.geometricutilities.PatternDefinition
-
Returns the linear definition.
- RectangularDimensionsData() - Constructor for class nxopen.routing.PathStockBuilder.RectangularDimensionsData
-
- rectangularEdgesFixedUniformLoadDeflection(double, double, double, double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the maximum deflection of a rectangular plate with all edges fixed
under a uniformly distributed load of the plate.
- rectangularEdgesFixedUniformLoadStress(double, double, double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the maximum tensile stress of a rectangular plate with all edges fixed
under a uniformly distributed load of the plate.
- rectangularEdgesSupportedUniformLoadDeflection(double, double, double, double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the maximum deflection of a rectangular plate with all edges supported
at top and bottom under a uniformly distributed load over the surface of the plate.
- rectangularEdgesSupportedUniformLoadStress(double, double, double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the maximum tensile stress of a rectangular plate with all edges supported
at top and bottom under a uniformly distributed load over the surface of the plate.
- RectangularFrameBuilder - Interface in nxopen.geometricutilities
-
Rectangular frame builder .
- RectangularFrameBuilder.AnchorLocationType - Class in nxopen.geometricutilities
-
Anchor location types
- rectangularGridEmphasis - Variable in class nxopen.uf.UFDisp.Grid
-
- rectangularHeight() - Method in interface nxopen.mechanicalrouting.PathStockPreferenceBuilder
-
- rectangularHeight() - Method in interface nxopen.routing.PathStockBuilder
-
- rectangularInsert() - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
Returns the insert to do rectangular array .
- rectangularLength() - Method in interface nxopen.features.sheetmetal.ClosedCornerBuilder
-
Returns the length of rectangular relief.
- rectangularOperation() - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
Returns the rectangular array operation.
- RectangularPattern - Interface in nxopen.geometricutilities
-
the rectangular pattern definition.
- RectangularPattern.SimplifiedLayoutTypes - Class in nxopen.geometricutilities
-
defines simplified layout type for linear pattern.
- RectangularPattern.StaggerOptions - Class in nxopen.geometricutilities
-
defines any stagger to be defined on the pattern.
- rectangularRotation() - Method in interface nxopen.routing.PathStockBuilder
-
- rectangularSection() - Method in interface nxopen.features.SectionInertiaAnalysisBuilder
-
Returns the rectangular section
License requirements: None.
- rectangularShowMajorLines() - Method in interface nxopen.preferences.WorkPlane
-
Returns the show major lines flag for rectangular grid
License requirements: None.
- RectangularTarget - Interface in nxopen.annotations
-
Represents a rectangular datum target
To create or edit an instance of this class, use
PmiDatumTargetBuilder
Created in NX4.0.0
- RectangularTargetData - Interface in nxopen.annotations
-
Represents rectangular datum target data .
- rectangularWidth() - Method in interface nxopen.features.sheetmetal.ClosedCornerBuilder
-
Returns the width of rectangular relief.
- rectangularWidth() - Method in interface nxopen.mechanicalrouting.PathStockPreferenceBuilder
-
- rectangularWidth() - Method in interface nxopen.routing.PathStockBuilder
-
- rectangularXVector() - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
Returns the X vector for rectangular array.
- rectangularYVector() - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
Returns the Y vector for rectangular array.
- rectDeleteAllComponents() - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
Returns the option to delete all components in rectangular array.
- RECURDYN - Static variable in class nxopen.motion.MotionEnvironment.Solver
-
Motion solver RecurDyn
- recurDynFriction() - Method in interface nxopen.motion.JointFriction
-
Returns the joint recurdyn friction
License requirements: mechanisms ("MECHANISMS")
.
- recurdynParameters() - Method in interface nxopen.motion.BodyContactBuilder
-
Returns the 3D BodyContact's subobject (the recurdyn parameters)
License requirements: None.
- recurdynParameters() - Method in interface nxopen.motion.CurveContactBuilder
-
Returns the 2D CurveContact's subobject (the recurdyn parameters)
License requirements: None.
- recurdynSolverProperty() - Method in interface nxopen.motion.MotionSolutionBuilder
-
Returns the Recurdyn Solver property
License requirements: None.
- RecurdynSolverProperty - Interface in nxopen.motion
-
- RecurdynSolverProperty.StaticIntegratorTypes - Class in nxopen.motion
-
Integrator type
- RECYCLE_BIN - Static variable in class nxopen.tooling.UnusedFileManagementBuilder.FileDirectory
-
recycle bin
- red - Variable in class nxopen.ColorDefinitionRgb
-
red color value
- red - Variable in class nxopen.DisplayManager.J3dColor
-
red value in the range 0.0 to 1.0
- red - Variable in class nxopen.uf.UFView.LightAttributes
-
- RED_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- RED_RED_ORANGE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- RED_RED_PINK_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- redColor - Variable in class nxopen.preferences.ViewVisualizationSpecialEffects.ColorRGB
-
Red in RGB pattern
- REDEFINED - Static variable in class nxopen.motion.ParamRedefineState
-
Parameter is redefined
- redefineMargin(OrdinateOriginDimension, Associativity) - Method in interface nxopen.annotations.OrdinateMargin
-
Redefines an ordinate margin object by specifying a new associativity.
- redefineReplaceFaces(Tag, int, Tag[]) - Method in interface nxopen.uf.UFModeling
-
- redefineRpoConstraint(Tag, Tag, int, Tag, int) - Method in interface nxopen.uf.UFModlGeneral
-
- redefineSxlineHinge(Tag, UFDrf.LineObject, boolean) - Method in interface nxopen.uf.UFDraw
-
- redefineThickenSheet(Tag, String, String, Tag, Tag) - Method in interface nxopen.uf.UFModl
-
- redefineTrimFaces(Tag, int, Tag[], boolean) - Method in interface nxopen.uf.UFModlGeneral
-
- rediscoverFaces() - Method in interface nxopen.weld.JointmarkBuilder
-
Use the Weld Assistant Connected Face Finder command to rediscover faces based on the current feature point positions.
- rediscoverGuideEnds() - Method in interface nxopen.weld.JointmarkGuideBuilder
-
Use the specified reuse features to set the start and end distance for the guide curve.
- redisplayObject() - Method in interface nxopen.DisplayableObject
-
Redisplays the object in all views.
- redistribute() - Method in interface nxopen.cam.FeatureGeometryGroup
-
Redistributes the geometry of the feature geometry group
License requirements: cam_base ("CAM BASE")
.
- redo() - Method in interface nxopen.Session
-
Redo the last undo if possible.
- redraw(boolean) - Method in interface nxopen.blockstyler.Tree
-
Freezes the tree if the value is set to False which implies that no changes would occur
in the tree after this point.
- REDUCE_SCALE - Static variable in class nxopen.geometricanalysis.ReflectionAnalysisBuilder.ImageSizeOption
-
Reduce scale size.
- REDUCE_SCALE - Static variable in class nxopen.View.ScaleFactor
-
Reduce scale by 10%
- reduceDepthPerCutWhenEmbeded() - Method in interface nxopen.cam.BladeCutLevels
-
Returns the Reduce Depth per Cut when Embeded toggle
License requirements: None.
- reducedFaceType() - Method in interface nxopen.geometricutilities.ReduceSurfaceRadiusBuilder
-
Returns the type of performing the radius reduction preview
License requirements: None.
- REDUCEDPOLYNOMIAL - Static variable in class nxopen.PhysicalMaterial.Type
-
Reduced Polynomial
- ReduceSurfaceRadiusBuilder - Interface in nxopen.geometricutilities
-
Reduce Surface Radius Builder of Geometric Utilities.
- ReduceSurfaceRadiusBuilder.FaceSelectionSpecification - Class in nxopen.geometricutilities
-
Specify the face selection type.
- ReduceSurfaceRadiusBuilder.ReducedFaceTypeSpecification - Class in nxopen.geometricutilities
-
Specify three ways to do preview.
- ReduceSurfaceRadiusBuilder.ReduceValueTypeSpecification - Class in nxopen.geometricutilities
-
Specify the reduction method.
- ReduceSurfaceRadiusFaceGroupBuilder - Interface in nxopen.geometricutilities
-
Reduce Surface Radius Face Group Builder of Geometric Utilities.
- ReduceSurfaceRadiusFaceGroupBuilderList - Interface in nxopen.geometricutilities
-
Represents a list of objects.
- reduceValueType() - Method in interface nxopen.geometricutilities.ReduceSurfaceRadiusBuilder
-
Returns the type of reduced value which results surface shape
License requirements: None.
- reductionAngle() - Method in interface nxopen.cae.optimization.TBSSmoothBuilder
-
Returns the reduction angle that defines the maximal angle between adjacent faces at a node such
that the node may be removed during the data reduction
License requirements: None.
- reductionRate() - Method in interface nxopen.cae.optimization.TBSSmoothBuilder
-
Returns the reduction rate that defines the percent of faces that should be removed during the data reduction.
- redundantViolationToleranceForAngleExpression() - Method in interface nxopen.motion.RecurdynSolverProperty
-
Returns the redundant violation tolerance expression for angle
License requirements: None.
- redundantViolationToleranceForLengthExpression() - Method in interface nxopen.motion.RecurdynSolverProperty
-
Returns the redundant violation tolerance expression for length
License requirements: None.
- redvalue - Variable in class nxopen.tooling.AssignPatchBuilder.PatchColorData
-
red value between 0 and 1
- redvalue - Variable in class nxopen.tooling.EdgePatchBuilder.BodyColorData
-
red value between 0 and 1
- redvalue - Variable in class nxopen.tooling.EnlargeSurfaceBuilder.ColorValueData
-
red value between 0 and 1
- redvalue - Variable in class nxopen.tooling.SpecifyBaffleBuilder.ChannelColorData
-
red value between 0 and 1
- redvalue - Variable in class nxopen.tooling.TrimRegionBuilder.ColorValueData
-
red value between 0 and 1
- REF - Static variable in class nxopen.routing.RoutePartDescriptor.CharxType
-
- ref1 - Variable in class nxopen.uf.UFGexp.AskDistanceParmsData
-
- ref2 - Variable in class nxopen.uf.UFGexp.AskDistanceParmsData
-
- REF_SET_ABSENT - Static variable in class nxopen.uf.UFWeight.ExceptionReason
-
- refChain - Variable in class nxopen.RuleManager.DebugInstance
-
name of instance
- refCS() - Method in interface nxopen.cae.AssignNodalCSBuilder
-
Returns the ref cs
License requirements: None.
- refCSType() - Method in interface nxopen.cae.AssignNodalCSBuilder
-
Returns the ref cstype
License requirements: None.
- refCsys() - Method in interface nxopen.cae.NodeModifyLabelBuilder
-
Returns the ref csys
License requirements: None.
- refCsys() - Method in interface nxopen.tooling.StockSizeBuilder
-
- refCsysSelection() - Method in interface nxopen.tooling.StockSizeBuilder
-
Returns the reference csys to calculate stocksize.
- refDofIndex - Variable in class nxopen.cae.CorrelSolution.CalculateComacsData
-
reference dof index
- refEdge - Variable in class nxopen.uf.UFModl.SmcornerData
-
- REFERENCE - Static variable in class nxopen.annotations.DrivingValueBuilder.DrivingValueMethod
-
- reference() - Method in interface nxopen.annotations.DrivingValueBuilder
-
Returns the reference dimension toggle used to create the dimension as reference instead of driving.
- REFERENCE - Static variable in class nxopen.annotations.SearchCriteriaDimensionBuilder.ToleranceTypes
-
Reference
- REFERENCE - Static variable in class nxopen.annotations.ToleranceType
-
(xxx)
- reference() - Method in interface nxopen.cae.AfuHeaderId
-
Returns the string to define reference direction sense
License requirements: None.
- REFERENCE - Static variable in class nxopen.cae.DisplayNodalCsysBuilder.DisplayNodalCsysType
-
- reference() - Method in interface nxopen.cae.LaminateRandomEventBuilder
-
- REFERENCE - Static variable in class nxopen.cae.PropertyTable.PropertyType
-
- REFERENCE - Static variable in class nxopen.ConvertToFromReferenceBuilder.OutputType
-
Outputs become reference objects.
- reference() - Method in interface nxopen.diagramming.LocationBuilder
-
Returns the sheet element whose coordinate system the coordinate is specified in.
- reference() - Method in interface nxopen.drawings.GeneralViewStyle
-
Returns the status of reference, that toggles a view from active to reference.
- REFERENCE - Static variable in class nxopen.drawings.ViewProjectionBuilder.CurveType
-
Reference
- reference() - Method in interface nxopen.drawings.ViewStyleGeneralBuilder
-
Returns the reference toggle on the GENERAL tab of the View Style Dialog
License requirements: None.
- reference - Variable in class nxopen.features.RPOBuilder.ReferenceDirectionData
-
Reference entity
- reference() - Method in interface nxopen.features.shipdesign.OrientationPointMethodsBuilder
-
Returns the object used to measure the distance from to determine the boundary of the region.
- REFERENCE - Static variable in class nxopen.features.shipdesign.PenetrationUtils.Referencetype
-
- reference() - Method in interface nxopen.features.UserDefinedFeatureReferenceData
-
Returns the reference of a user defined feature
License requirements: None.
- REFERENCE - Static variable in class nxopen.geometricanalysis.DeviationGaugeBuilder.ReportingPerTypes
-
Per Reference Object
- reference() - Method in interface nxopen.geometricutilities.MatchSurfaceBuilder
-
Returns the selected reference edge or curve
License requirements: None.
- REFERENCE - Static variable in class nxopen.geometricutilities.PatternDefinition.PatternEnum
-
reference pattern.
- REFERENCE - Static variable in class nxopen.issue.SnapshotSubsetBuilder.ContextType
-
Reference Subset
- REFERENCE - Static variable in class nxopen.NXObject.AttributeType
-
Deprecated.
- REFERENCE - Static variable in class nxopen.pdm.PdmSoaqueryNxmgrfielddatatype
-
Reference
- reference() - Method in interface nxopen.preferences.GeneralViewPreferences
-
Returns the status of reference.A view can have a status of either Active or Reference.
- REFERENCE - Static variable in class nxopen.SketchDimensionalConstraint.DimensionStateType
-
Reference dimension
- REFERENCE - Static variable in class nxopen.uf.UFSket.ReferenceStatus
-
- REFERENCE_ACS_DISPLAY_PART - Static variable in class nxopen.geometricutilities.ModlMotion.Delta
-
Reference CSYS is absolute coordinate system in the display part
- REFERENCE_ACS_WORK_PART - Static variable in class nxopen.geometricutilities.ModlMotion.Delta
-
Reference CSYS is absolute coordinate system in the work part
- REFERENCE_ARRAY - Static variable in class nxopen.cae.PropertyTable.PropertyType
-
- REFERENCE_AXES - Static variable in class nxopen.Sketch.AutoDimensioningRule
-
Create Dimensions to Reference Axes
- REFERENCE_CS - Static variable in class nxopen.cae.AssignNodalCSBuilder.Cs
-
reference only
- REFERENCE_EXISTING - Static variable in class nxopen.Part.Relations
-
Master model support
- REFERENCE_EXISTING_PART - Static variable in class nxopen.drawings.MarkAsTemplateBuilder.TemplateTypeEnum
-
- REFERENCE_ITEMS - Static variable in class nxopen.issue.IssueFolder.Type
-
Reference items type
- REFERENCE_ONLY_COMPONENT - Static variable in class nxopen.uf.UFWeight.ExceptionReason
-
- REFERENCE_POINT - Static variable in class nxopen.tooling.WorkpieceBuilder.MethodType
-
Create block by define the reference point
- REFERENCE_SCALING - Static variable in class nxopen.display.ImageBaseBuilder.SizeOptions
-
reference scaling option
- REFERENCE_SET - Static variable in class nxopen.AttributePropertiesBaseBuilder.ObjectOptions
-
Deprecated.
Apply attribute to the reference set
- REFERENCE_SET - Static variable in class nxopen.AttributeTemplatesBuilder.AccessKey
-
This attribute template will be accessible by reference sets
- REFERENCE_SET_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
-
The reference set used by the component
- REFERENCE_TOL - Static variable in class nxopen.uf.UFDrf.ToleranceType
-
- REFERENCE_TOOL - Static variable in class nxopen.cam.DriveMode.Type
-
Reference Tool
- REFERENCE_VIEW - Static variable in class nxopen.uf.UFDraw.ViewStatus
-
- REFERENCE_WCS_DISPLAY_PART - Static variable in class nxopen.geometricutilities.ModlMotion.Delta
-
Reference CSYS is work coordinate system in the display part
- REFERENCE_WCS_WORK_PART - Static variable in class nxopen.geometricutilities.ModlMotion.Delta
-
Reference CSYS is work coordinate system in the work part
- referenceAsString() - Method in interface nxopen.blockstyler.OrientXpress
-
Returns the Reference as string
License requirements: None.
- referenceAxis - Variable in class nxopen.Sketch.ReferenceDirectionData
-
An edge, datum axis, datum plane, or face that the sketch uses as a reference.
- referenceAxisOrientation - Variable in class nxopen.Sketch.ReferenceDirectionData
-
Indicates whether the reference axis is horizontal or vertical
- referenceAxisSense - Variable in class nxopen.Sketch.ReferenceDirectionData
-
If reference axis is an edge or datum axis,
this parameter indicates whether the reference axis is
in the same direction as the edge or datum axis or in the opposite
direction.
- ReferenceBlendBuilder - Interface in nxopen.tooling
-
- ReferenceBlendCollection - Interface in nxopen.tooling
-
Creates reference blend collection
To obtain an instance of this class, refer to
ToolingManager
Created in NX7.0.0
- referenceBlends() - Method in interface nxopen.tooling.ToolingManager
-
Returns the ReferenceBlendCollection instance belonging to this part .
- referenceCenter() - Method in interface nxopen.tooling.ElectrodeBlankBuilder
-
Returns the blank reference point.
- referenceCenter() - Method in interface nxopen.tooling.ElectrodeComponentBuilder
-
Returns the component reference point.
- referenceComponent() - Method in interface nxopen.assemblies.AssembliesGeneralPropertiesBuilder
-
Returns the reference-only component flag.
- referenceCoordinateSystem() - Method in interface nxopen.cae.optimization.TBSBaseDesignVariableBuilder
-
Returns the referenced coordinate system
License requirements: None.
- referenceCoordinateSystem() - Method in interface nxopen.cae.optimization.TBSTopologyLinkCondition
-
Returns the referenced coordinate system used for the link condition
License requirements: None.
- referenceCoordinateSystem() - Method in interface nxopen.cae.responsesimulation.CsdEvaluationSettingBuilder
-
Returns the coordinate system of reference element.
- referenceCoordinateSystem() - Method in interface nxopen.features.FaceRecognitionBuilder
-
Returns the reference coordinate system to use for symmetry and coplanar axis recognition
License requirements: None.
- referenceCsys() - Method in interface nxopen.blockstyler.OrientXpress
-
Returns the ReferenceCsys
License requirements: None.
- referenceCsys() - Method in interface nxopen.cae.FENode
-
Returns the nodes reference coordinate system or null if it is the absolute coordinate system
License requirements: None.
- referenceCsys() - Method in interface nxopen.cae.MechanicalLoadSumBuilder
-
Returns the reference csys
License requirements: None.
- referenceCsys() - Method in interface nxopen.cae.SolidPropertyCheckBuilder
-
Returns the reference csys
License requirements: None.
- referenceCSYS() - Method in interface nxopen.features.ScaleCurveBuilder
-
Returns the reference csys
License requirements: None.
- referenceCsys() - Method in interface nxopen.motion.VObject
-
Returns the csys of reference link, the coordinate system of action and reaction are same each other
License requirements: mechanisms ("MECHANISMS")
.
- referenceCsysPattern() - Method in interface nxopen.tooling.ReusePositioningObjectBuilder
-
Returns the referenced CSYS pattern
License requirements: None.
- referenceCsysType() - Method in interface nxopen.features.ToolingBoxBuilder
-
Returns the reference csys type
License requirements: None.
- referenceCsysType() - Method in interface nxopen.tooling.StockSizeBuilder
-
Returns the reference csys type
License requirements: None.
- referenceCurve() - Method in interface nxopen.features.shipdesign.TraceLinesBuilder
-
Returns the reference curve
License requirements: None.
- referenceCurve() - Method in interface nxopen.geometricutilities.StyledSweepReferenceMethodBuilder
-
Returns the section orientation reference curve.
- referenceCurveColor() - Method in interface nxopen.preferences.PartSketch
-
Returns the sketch reference curve color
License requirements: None.
- referenceData() - Method in interface nxopen.tooling.DieEngDieTipBuilder
-
Returns the reference data
License requirements: die_engineering ("DIE ENGINEERING")
.
- referenceDataLocation() - Method in interface nxopen.cae.responsesimulation.CsdEvaluationSettingBuilder
-
Returns the reference element location of reference element.
- referencedAttachmentId() - Method in interface nxopen.issue.IssueAttachment
-
Returns the refereced attachment id which specifies one attachment that is related
to this
IssueAttachment
License requirements: None.
- ReferencedAttributesData() - Constructor for class nxopen.diagramming.FormattedStringBuilder.ReferencedAttributesData
-
- referencedCoordinateSystem() - Method in interface nxopen.cae.optimization.TBSCheckDOF
-
Returns the referenced coordinate system for displacement restriction
License requirements: None.
- referencedDispNames - Variable in class nxopen.ExpressionCollection.InterpartReferencesFor4gdData
-
array of display part names
- referencedDispNames - Variable in class nxopen.ExpressionCollection.InterpartReferencesWithDisplayNamesData
-
array of display part names
- referencedEdgesOnly - Variable in class nxopen.uf.UFDraw.RenderPrefs
-
- referencedEdgesOnly - Variable in class nxopen.uf.UFDraw.ViewPrfs
-
- referenceDefinition() - Method in interface nxopen.geometricutilities.PatternDefinition
-
Returns the reference definition.
- ReferenceDesignationSetNode - Interface in nxopen.ame
-
Reference Designation Set Node Journaling class
This object does not need a creator.
- referenceDesignator - Variable in class nxopen.tooling.SIZERExportBuilder.MCDMechanicalData
-
Logical Reference Designator
- referenceDimension() - Method in interface nxopen.annotations.DimensionStyleBuilder
-
Returns the reference dimension flag
License requirements: None.
- referenceDimensionColor() - Method in interface nxopen.preferences.PartSketch
-
Returns the sketch reference dimension color
License requirements: None.
- referenceDimensionFlag() - Method in interface nxopen.annotations.Dimension
-
Returns a setting to control the visibility of the reference parenthesis of a dimension.
- referenceDimensionPrefix() - Method in interface nxopen.annotations.DimensionPreferences
-
Returns the prefix characters for reference dimension
License requirements: None.
- referenceDimensionPrefix() - Method in interface nxopen.annotations.DimensionStyleBuilder
-
Returns the prefix characters for reference dimension
License requirements: None.
- referenceDimensionSuffix() - Method in interface nxopen.annotations.DimensionPreferences
-
Returns the suffix characters for reference dimension
License requirements: None.
- referenceDimensionSuffix() - Method in interface nxopen.annotations.DimensionStyleBuilder
-
Returns the suffix characters for reference dimension
License requirements: None.
- referenceDirection() - Method in interface nxopen.die.DrawBeadBuilder
-
Returns the indication if the "Left" direction for section orientation should be reversed from the default direction.
- referenceDirection() - Method in interface nxopen.features.IsoclineCurveBuilder
-
Returns the reference direction
License requirements: None.
- referenceDirection() - Method in interface nxopen.features.shipdesign.EdgeCutBuilder
-
Returns the reference direction
License requirements: None.
- referenceDirection() - Method in interface nxopen.features.shipdesign.StiffenerBuilder
-
Returns the reference direction
License requirements: None.
- referenceDirection() - Method in interface nxopen.motion.VObject
-
Returns the reference direction
License requirements: None.
- referenceDirection - Variable in class nxopen.Sketch.ReferenceDirectionData
-
- referenceDirection() - Method in interface nxopen.tooling.BlendCurve3DBuilder
-
Returns the reference direction from which to get the curve blend side.
- ReferenceDirectionData() - Constructor for class nxopen.features.RPOBuilder.ReferenceDirectionData
-
- ReferenceDirectionData() - Constructor for class nxopen.Sketch.ReferenceDirectionData
-
- referenceDirectionOption() - Method in interface nxopen.display.ImageBaseBuilder
-
Returns the image alignment reference direction type.
- referenceDirectionOption() - Method in interface nxopen.features.SilhouetteFlangeBuilder
-
Returns the reference direction option
License requirements: None.
- referencedPartNames - Variable in class nxopen.ExpressionCollection.InterpartReferencesFor4gdData
-
array of internal part names
- referencedPartNames - Variable in class nxopen.ExpressionCollection.InterpartReferencesWithDisplayNamesData
-
array of internal part names
- referencedParts - Variable in class nxopen.ExpressionCollection.InterpartReferencesFor4gdData
-
array of occ parts and part occs
- referencedPattern() - Method in interface nxopen.geometricutilities.ReferencePattern
-
Returns the referenced pattern object.
- referencedSolution() - Method in interface nxopen.cae.optimization.TBSOptimizationSolutionBuilder
-
Returns the referenced solution
License requirements: None.
- referencedSolution() - Method in interface nxopen.cae.responsesimulation.SolutionBuilder
-
Returns the referenced solution which must be a SEMODES *103 solution with modal results solved
License requirements: nx_response_anlys ("NX Response Analysis")
.
- referencedSpreadsheet - Variable in class nxopen.uf.UFTabnot.CellPrefs
-
- referenceEdge() - Method in interface nxopen.features.sheetmetal.ResizeBendAngleBuilder
-
Returns the reference edge
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- referenceEdge() - Method in interface nxopen.features.subdivision.SubdivisionSplitFaceBuilder
-
Returns the reference edges.
- referenceEdgesOnly() - Method in interface nxopen.drawings.HiddenLinesViewStyle
-
Returns the status of reference edges only.This controls the rendering of hidden edges with
annotation.
- referenceEdgesOnly() - Method in interface nxopen.drawings.ViewStyleHiddenLinesBuilder
-
Returns the reference edges only toggle on the HIDDEN LINES tab of the View Style Dialog
License requirements: None.
- referenceEdgesOnly() - Method in interface nxopen.preferences.HiddenLinesViewPreferences
-
Returns the status of reference edges only.This controls the rendering of hidden edges with
annotation.
- referenceElement() - Method in interface nxopen.cae.responsesimulation.CsdEvaluationSettingBuilder
-
Returns the reference element.
- referenceElementDataComponent() - Method in interface nxopen.cae.responsesimulation.CsdEvaluationSettingBuilder
-
Returns the direction data component of reference element.
- referenceEntity() - Method in interface nxopen.features.sheetmetal.RebendBuilder
-
Returns the non-thickness planar face or linear edge to remain fixed while part is rebent
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- referenceEntity() - Method in interface nxopen.features.sheetmetal.ResizeBendRadiusBuilder
-
Returns the non-thickness planar face or linear edge to remain fixed while bend is resized
License requirements: None.
- referenceEntity() - Method in interface nxopen.features.sheetmetal.UnbendBuilder
-
Returns the non-thickness planar face or linear edge to remain fixed while part is unbent
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- referenceFace() - Method in interface nxopen.features.sheetmetal.ResizeBendAngleBuilder
-
Returns the reference face
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- referenceFace() - Method in interface nxopen.features.shipdesign.ReferenceLineBuilder
-
Returns the face to intersect with, defining the reference line.
- referenceFace() - Method in interface nxopen.geometricutilities.MatchSurfaceBuilder
-
Returns the selected face for reference curve
License requirements: None.
- referenceFace() - Method in interface nxopen.tooling.ChannelAdjustBuilder
-
Returns the reference faces for calculating the distance to the cooling channels.
- referenceFace() - Method in interface nxopen.tooling.EdgePatchBuilder
-
Returns the reference face to use to create edge patch.
- referenceFaceEdge() - Method in interface nxopen.tooling.UnfoldingSimulationBuilder
-
Returns the reference face edge
License requirements: None.
- referenceFaceEdge() - Method in interface nxopen.tooling.UniversalUnformBuilder
-
Returns the reference face edge
License requirements: None.
- referenceFaces() - Method in interface nxopen.features.SilhouetteFlangeBuilder
-
Returns the reference faces.
- referenceFeature() - Method in interface nxopen.die.OutputCurvesBuilder
-
Returns the reference feature - must be either a die section or form task feature
License requirements: die_engineering ("DIE ENGINEERING")
.
- referenceFeatureAutoName() - Method in interface nxopen.cam.InspectionPathBuilder
-
Returns the automatic reference feature name
License requirements: None.
- referenceFeatureMode() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns the relative measurement mode
License requirements: None.
- referenceFeatureModeBuilder() - Method in interface nxopen.cam.InspectionPathBuilder
-
Returns the reference feature mode builder
License requirements: None.
- referenceFeatureName() - Method in interface nxopen.cam.InspectionPathBuilder
-
Returns the reference feature name
License requirements: None.
- referenceFeatureName() - Method in interface nxopen.features.shipdesign.ManufacturingPreparationBuilder
-
Returns the feature name
License requirements: None.
- referenceFeatureOffsetDistance() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns the offset distance for relative measurement
License requirements: None.
- referenceFeatureOffsetDistanceBuilder() - Method in interface nxopen.cam.InspectionPathBuilder
-
Returns the reference feature offset distance builder
License requirements: None.
- referenceFeaturePointCount() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns the number of points for relative measurement
License requirements: None.
- referenceFeaturePointCountBuilder() - Method in interface nxopen.cam.InspectionPathBuilder
-
Returns the reference feature point count builder
License requirements: None.
- referenceFeatureZoneRadius() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns the zone radius for relative measurement
License requirements: None.
- referenceFeatureZoneRadiusBuilder() - Method in interface nxopen.cam.InspectionPathBuilder
-
Returns the reference feature zone radius builder
License requirements: None.
- referenceFrame() - Method in interface nxopen.motion.MotionSensorBuilder
-
Returns the reference frame type
License requirements: None.
- referenceGeometry() - Method in interface nxopen.features.shipdesign.ShipSectionBuilder
-
Returns the reference geometry
License requirements: None.
- referenceGeometryGapTolerance() - Method in interface nxopen.drafting.AutomationRuleBuilder
-
Returns the reference geometry search gap tolerance
License requirements: None.
- referenceGeometryImportColor() - Method in interface nxopen.preferences.SessionNXGateway
-
Returns the reference geometry import color for I-DEAS
License requirements: None.
- referenceGeometryImportLayer() - Method in interface nxopen.preferences.SessionNXGateway
-
Returns the reference geometry import layer for I-DEAS
License requirements: None.
- referenceGeometryPlane() - Method in interface nxopen.features.sheetmetal.BridgeTransitionBuilder
-
Returns the reference geometry plane
License requirements: nx_flexible_pcb ("NX Flexible PCB") OR nx_sheet_metal ("NX Sheet Metal")
.
- referenceGeometrySearchDistance() - Method in interface nxopen.drafting.AutomationPreferencesBuilder
-
Returns the reference geometry search distance
License requirements: None.
- referenceId() - Method in interface nxopen.cae.AfuHeaderId
-
Returns the ID of reference element or node
License requirements: None.
- referenceId() - Method in interface nxopen.routing.RunItem
-
Returns the unique reference identifier for this Run Item.
- referenceIndex() - Method in interface nxopen.annotations.BaseCenterline3dBuilder
-
Returns the reference index
License requirements: None.
- ReferenceLine - Interface in nxopen.features.shipdesign
-
Represents a reference line feature.
- ReferenceLineBuilder - Interface in nxopen.features.shipdesign
-
- referenceLink() - Method in interface nxopen.motion.VObject
-
Returns the reference link
License requirements: None.
- referenceLinkAttachment() - Method in interface nxopen.motion.ControlInputBuilder
-
Returns the reference link attachment and its components are optional.
- ReferenceMapperBuilder - Interface in nxopen.features
-
- referenceMarker() - Method in interface nxopen.motion.MotionSensorBuilder
-
Returns the reference marker object
License requirements: None.
- referenceMethod() - Method in interface nxopen.features.StyledSweepBuilder
-
Returns the reference method
License requirements: None.
- referenceModeFrequencies - Variable in class nxopen.cae.CorrelSolution.CalculateComacsData
-
reference mode frequencies
- referenceModeFrequencies - Variable in class nxopen.cae.CorrelSolution.ComputeMacsData
-
ref mode frequencies
- referenceModeNumbers - Variable in class nxopen.cae.CorrelSolution.CalculateComacsData
-
reference mode numbers
- referenceModeNumbers - Variable in class nxopen.cae.CorrelSolution.ComputeMacsData
-
ref mode numbers
- referenceNode() - Method in interface nxopen.cae.responsesimulation.CsdEvaluationSettingBuilder
-
Returns the reference node.
- referenceNodeDataComponent() - Method in interface nxopen.cae.responsesimulation.CsdEvaluationSettingBuilder
-
Returns the direction data component of reference node.
- referenceNodeLabel() - Method in interface nxopen.cae.DeformationParameters
-
Returns the node label which identifies the reference node used when deforming the model if
DeformationParameters.isReferenceNode()
is set to true
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
Created in NX7.5.2
- referenceObject() - Method in interface nxopen.ame.BaseEvaluatorBuilder
-
Returns the context and source object selection
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- referenceObject() - Method in interface nxopen.motion.GraphObjectBuilder
-
Returns the reference object of graph object
License requirements: None.
- referenceObject() - Method in interface nxopen.motion.ResultMeasureBuilder
-
Returns the reference object
License requirements: mechanisms ("MECHANISMS")
.
- referenceObject() - Method in interface nxopen.pdm.PartOperationAttributePropertiesBuilder
-
Returns the referenced logical object from this attribute.
- referenceObject() - Method in interface nxopen.routing.AlignStockBuilder
-
Returns the reference object.
- referenceObject() - Method in interface nxopen.routing.BulkReplacementBuilder
-
Returns the reference object used to extract characteristics for Bulk Replacement
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- referenceObject() - Method in interface nxopen.routing.EditCharacteristicsBuilder
-
Returns the reference object to obtain the characteristic values
License requirements: routing_base ("Routing Basic")
.
- referenceObject() - Method in interface nxopen.routing.UnifyPathBuilder
-
Returns the reference object used to extract characteristics to unify.
- ReferenceObjectBuilder - Interface in nxopen.ame
-
Re-usable UI consist of a context and source selection .
- ReferenceObjectBuilder.SourceSelectionType - Class in nxopen.ame
-
possible choices for source object selection
- referenceObjects() - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder
-
Returns the reference object
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- referenceOffset1() - Method in interface nxopen.features.shipdesign.Cutout2Builder
-
Returns the reference offset1 (used only for Face2Lines, and Faces2Surfaces )
License requirements: None.
- referenceOffset2() - Method in interface nxopen.features.shipdesign.Cutout2Builder
-
Returns the reference offset2 (used only for Face2Lines, and Faces2Surfaces)
License requirements: None.
- referenceOffset3() - Method in interface nxopen.features.shipdesign.Cutout2Builder
-
Returns the reference offset3 (used only for FacesBetweenSurfacesSurface)
License requirements: None.
- referenceOption() - Method in interface nxopen.geometricutilities.OrientXpressBuilder
-
Returns the orientXpress reference coordinate system
License requirements: None.
- referenceOption() - Method in interface nxopen.geometricutilities.StyledSweepReferenceMethodBuilder
-
Returns the section orientation reference option.
- referenceOrigin() - Method in interface nxopen.motion.VObject
-
Returns the reference point
License requirements: None.
- referenceOutputColor() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the color that will be used for the reference lines
License requirements: None.
- referenceOutputFont() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the font that will be used for the reference lines
License requirements: None.
- referenceOutputLayer() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the layer that will be used for the reference lines
License requirements: None.
- referenceOutputWidth() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the line width that will be used for the reference lines
License requirements: None.
- referencePatches() - Method in interface nxopen.facet.MultiPatchAlignmentBuilder
-
Returns an optional reference facet body with a location and orientation that will
remain fixed, causing all of the other selected facet bodies to align with
it.
- ReferencePattern - Interface in nxopen.geometricutilities
-
the reference pattern definition.
- referencePlane() - Method in interface nxopen.cam.NCAssistantBuilder
-
Returns the Reference Plane
License requirements: None.
- referencePlane() - Method in interface nxopen.features.shipdesign.CustomBracketBuilder
-
Returns the reference plane
License requirements: None.
- referencePlane() - Method in interface nxopen.features.shipdesign.InverseBendingLinesBuilder
-
Returns the reference plane type determines how you will define the plane of the diagram and table
License requirements: None.
- referencePlane() - Method in interface nxopen.features.TabNoteCfgBuilder
-
Returns the reference plane
License requirements: None.
- referencePlaneLocation() - Method in interface nxopen.cae.LaminateExtrudeSetupBuilder
-
Returns the option to (de)activate reference plane location
License requirements: None.
- referencePlanePoint() - Method in interface nxopen.features.shipdesign.InverseBendingLinesBuilder
-
Returns the reference plane origin when one of the standard planes is chosen.
- referencePoint() - Method in interface nxopen.cam.BoundaryTurnBlank
-
Returns the reference point
License requirements: None.
- referencePoint() - Method in interface nxopen.cam.InspectionOperationTransformBuilder
-
Returns the reference point
License requirements: None.
- referencePoint() - Method in interface nxopen.cam.OperationTransformBuilder
-
Returns the reference point
License requirements: None.
- referencePoint() - Method in interface nxopen.cam.ToolPathEditorBuilder
-
Returns the reference point
License requirements: None.
- referencePoint() - Method in interface nxopen.die.OutputCurvesBuilder
-
Returns the reference point.
- referencePoint() - Method in interface nxopen.features.MirrorBuilder
-
- referencePoint() - Method in interface nxopen.features.PatternFaceFeatureBuilder
-
Returns the reference point service.
- referencePoint() - Method in interface nxopen.features.PatternFeatureBuilder
-
- referencePoint() - Method in interface nxopen.features.PatternGeometryBuilder
-
Returns the reference point service.
- referencePoint() - Method in interface nxopen.features.ScaleCurveBuilder
-
Returns the reference point
License requirements: None.
- referencePoint() - Method in interface nxopen.features.shipdesign.EdgeCutBuilder
-
Returns the reference point (part units)
License requirements: None.
- referencePoint() - Method in interface nxopen.features.shipdesign.StiffenerBuilder
-
Returns the reference point (part units)
License requirements: None.
- referencePoint() - Method in interface nxopen.features.SweptVolumeBuilder
-
Returns the Reference point
License requirements: None.
- referencePoint() - Method in interface nxopen.HumanData
-
Returns the reference point
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- referencePoint() - Method in interface nxopen.motion.RoadBuilder
-
Returns the reference point of the optional link object
License requirements: mechanisms ("MECHANISMS")
.
- referencePoint() - Method in interface nxopen.tooling.WorkpieceBuilder
-
Returns the reference point to generate the work piece
License requirements: None.
- referencePointCoordinates() - Method in interface nxopen.features.HumanBuilder
-
Returns the reference point coordinates
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- referencePointForEqualArcLength() - Method in interface nxopen.features.ProjectCurveBuilder
-
Returns the reference point for equal arc length
License requirements: None.
- referencePointJunction() - Method in interface nxopen.sim.KinematicChain
-
Returns the reference point junction of the kinematic chain
License requirements: None.
- referencePointLocationType() - Method in interface nxopen.HumanData
-
Returns the reference point type
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- referencePointPrecision() - Method in interface nxopen.tooling.ElectrodeBlankBuilder
-
Returns the precision of the reference coordinates in the machine set csys.
- referencepoints - Variable in class nxopen.die.QuickBinderBuilder.EdgesOfFaceData
-
reference points corresponding to each edge
- referencePointService() - Method in interface nxopen.features.MirrorBuilder
-
Returns the reference point service
License requirements: None.
- referencePointService() - Method in interface nxopen.features.PatternFeatureBuilder
-
Returns the reference point service
License requirements: None.
- referencePointType() - Method in interface nxopen.features.HumanBuilder
-
Returns the reference point type
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- referencePort() - Method in interface nxopen.routing.electrical.PathArrangementBuilder
-
Returns the port on which the offset is based when defining the path arrangement.
- referencePosition() - Method in interface nxopen.tooling.StandardPartPositionBuilder
-
Returns the reference point position.
- referencePositionType() - Method in interface nxopen.display.TransientText
-
Returns the position of the text relative to positions on the text box
License requirements: None.
- ReferencePropertiesOfReportData() - Constructor for class nxopen.visualreporting.VisualReportBuilder.ReferencePropertiesOfReportData
-
- ReferencePropertiesOfReportingPropertyData() - Constructor for class nxopen.visualreporting.VisualReportBuilder.ReferencePropertiesOfReportingPropertyData
-
- ReferencePt() - Constructor for class nxopen.cae.CorrelAlignmentBuilder.ReferencePt
-
- ReferencePt(boolean, double, double, double) - Constructor for class nxopen.cae.CorrelAlignmentBuilder.ReferencePt
-
Constructor for the ReferencePt object.
- referenceRegions - Variable in class nxopen.uf.UFDraw.BreakRegionData
-
- references() - Method in interface nxopen.drafting.DrawingCreationWizardBuilder
-
Returns the references.
- references() - Method in interface nxopen.geometricanalysis.sectionanalysis.SectionAnalysisBuilder
-
Returns the references (faces or faceted bodies)
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- referenceSet() - Method in interface nxopen.assemblies.AddComponentBuilder
-
Returns the reference set for added components.
- referenceSet() - Method in interface nxopen.assemblies.Component
-
Returns
the name of the reference set used for this component
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- referenceSet() - Method in interface nxopen.assemblies.CreateNewComponentBuilder
-
Returns the reference set
License requirements: None.
- referenceSet() - Method in interface nxopen.assemblies.DesignElementBuilder
-
Returns the reference set of a design element
License requirements: None.
- ReferenceSet - Interface in nxopen
-
- referenceSet() - Method in interface nxopen.tooling.StandardPartBuilder
-
Returns the reference set currently used to add a new component to an assembly.
- referenceSetBehavior() - Method in interface nxopen.drawings.ViewStyleInheritPmiBuilder
-
Returns the reference set option
License requirements: None.
- ReferenceSetBehavior - Class in nxopen.preferences
-
Represents the Reference Set options
- referenceSetName() - Method in interface nxopen.assemblies.CreateNewComponentBuilder
-
Returns the reference set name.
- referenceSetName() - Method in interface nxopen.assemblies.DesignElementBuilder
-
Returns the reference set name of a design element.
- referencesetname - Variable in class nxopen.assemblies.ReplaceComponentBuilder.ComponentReferenceSetTypeData
-
Name of the reference set
- referenceSetName() - Method in interface nxopen.shapesearch.ShapeSearchBuilder
-
Returns the part reference set name to be set for search
License requirements: shape_search ("Shape Search")
.
- referenceSetOverride() - Method in interface nxopen.LoadOptions
-
Returns the option that specifies if the default reference set list should be
applied to components all the way down an assembly tree.
- referenceSets() - Method in interface nxopen.tooling.PocketBuilder
-
Returns the types of reference sets
License requirements: None.
- referenceSheetSpacingMethod() - Method in interface nxopen.weld.WeldPointBuilder
-
Returns the refsheet spacing method
License requirements: ugweld ("UG WELD")
.
- referenceSheetType() - Method in interface nxopen.weld.JointmarkBuilder
-
Returns the type of reference sheet
License requirements: ugweld ("UG WELD")
.
- referenceSheetType() - Method in interface nxopen.weld.WeldPointBuilder
-
Returns the type of sheet to create to place weld points on.
- ReferenceShowTypes - Class in nxopen.drawings
-
reference show type
- referenceSolution() - Method in interface nxopen.cae.aerostructures.MarginSolutionBuilder
-
Returns the referenced FE-Solution of the AeroStructure solution
License requirements: nx_masterfem ("Finite Element Modeling")
.
- referenceSolution() - Method in interface nxopen.cae.CorrelSolutionBuilder
-
Returns the reference (test) solution of correlation
License requirements: None.
- referenceString - Variable in class nxopen.uf.UFAttr.GetReferenceStringOfUserAttributeData
-
- referenceSubset() - Method in interface nxopen.issue.SnapshotWorksetBuilder
-
Returns the referenceSubset containing the reference parts.
- referenceSurfaceSelectionBlock() - Method in interface nxopen.STLCreator
-
Returns the reference surface selection - the object selection will be done by this block.
- referenceSymbolCustomText() - Method in interface nxopen.annotations.PartsListBuilder
-
Returns the reference symbol custom text specifies the custom text to display in the main callout symbol
License requirements: None.
- referenceSymbolText() - Method in interface nxopen.annotations.PartsListBuilder
-
Returns the reference symbol text specifies the text to display in the reference callout symbol
License requirements: None.
- referenceText - Variable in class nxopen.uf.UFDrf.WeldSymbols
-
- referenceTool() - Method in interface nxopen.cam.MillOperationBuilder
-
Returns the reference tool object
License requirements: None.
- referenceToolDiameter() - Method in interface nxopen.cam.DriveMode
-
Returns the Reference Tool Diameter
License requirements: None.
- referenceToShow() - Method in interface nxopen.drawings.ViewDetailLabelBuilder
-
Returns the reference to show
License requirements: None.
- referenceToShow() - Method in interface nxopen.drawings.ViewLabelBuilder
-
Returns the reference to show
License requirements: None.
- referenceToShow() - Method in interface nxopen.drawings.ViewSectionLabelBuilder
-
Returns the reference to show
License requirements: None.
- referenceType() - Method in interface nxopen.cae.LaminateDynamicEventBuilder
-
Returns the reference type
License requirements: None.
- referenceType() - Method in interface nxopen.cam.ToolPathTiltTilting
-
Returns the tilting reference type
License requirements: None.
- referenceType() - Method in interface nxopen.IgesCreator
-
Returns the reference type - reference coordinate system for export
License requirements: None.
- referenceUserDefinedDirection() - Method in interface nxopen.cae.responsesimulation.CsdEvaluationSettingBuilder
-
Returns the user defined direction of reference node.
- referenceUsingUserDefinedDirection() - Method in interface nxopen.cae.responsesimulation.CsdEvaluationSettingBuilder
-
Returns the option of using user defined direction of the reference node.
- referenceValue() - Method in interface nxopen.cae.optimization.TBSSingleObjective
-
Returns the reference value
License requirements: None.
- referenceValue - Variable in class nxopen.NXObject.AttributeInformation
-
Reference string of a string type attribute (it is null if it is a 'normal' string attribute).
- referenceVector() - Method in interface nxopen.cae.UserDefinedSolidBeamSectionBuilder
-
Returns the reference vector
License requirements: None.
- referenceVector() - Method in interface nxopen.cam.NCAssistantBuilder
-
Returns the Reference Vector
License requirements: None.
- referenceVector() - Method in interface nxopen.die.PierceItemBuilder
-
Returns the reference direction of the hole
License requirements: die_engineering ("DIE ENGINEERING")
.
- referenceVector() - Method in interface nxopen.features.GuidedExtensionBuilderEx
-
Returns the reference vector which is active when the type is vector
License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_2 ("advanced freeform modeling") OR ug_mold_design ("UG MOLD") OR die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- referenceVector() - Method in interface nxopen.features.SilhouetteFlangeBuilder
-
Returns the reference vector
License requirements: None.
- referenceVector() - Method in interface nxopen.formboard.OrientBranchBuilder
-
- referenceVector() - Method in interface nxopen.geometricutilities.StyledSweepReferenceMethodBuilder
-
Returns the section orientation reference vector.
- referenceVector() - Method in interface nxopen.routing.AlignStockBuilder
-
Returns the reference vector.
- referenceVertex() - Method in interface nxopen.features.sheetmetal.FlatPatternBuilder
-
Returns the end of the edge where the tangent will define the x axis for flat as solid.
- referenceVertex() - Method in interface nxopen.features.sheetmetal.FlatSolidBuilder
-
Returns the end of the edge where the tangent will define the x axis for flat as solid.
- referObject() - Method in interface nxopen.tooling.BendOperationBuilder
-
Returns the reference objects.
- referPart() - Method in interface nxopen.tooling.ElectrodeComponentBuilder
-
Returns the option to install a chuck by referring to the template part directly or not.
- refFace - Variable in class nxopen.uf.UFModl.SmcornerData
-
- refFace1 - Variable in class nxopen.uf.UFModl.SmjoggleData
-
- refFace2 - Variable in class nxopen.uf.UFModl.SmjoggleData
-
- refFaces() - Method in interface nxopen.features.sheetmetal.AeroFlangeBuilder
-
Returns the ref face smart collector object
License requirements: aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- REFINED - Static variable in class nxopen.facet.FillHoleBuilder.SmoothTypes
-
Smooth internal fill.
- RefineDisplayBuilder - Interface in nxopen.drawings
-
- refinementlevel - Variable in class nxopen.cae.SetManager.TargetSetDistributedPlanesData
-
Refinement level of the distributed plave wave set.
- refineTessellation - Variable in class nxopen.cae.FemPart.MeshPreferencesData
-
Refine tessellation 0 or 1
- refIsHorizontal - Variable in class nxopen.uf.UFModeling.AskLinkFacesData
-
- REFIT - Static variable in class nxopen.features.RefitFaceBuilder.Types
-
refit face
- REFIT_FACE_CONTINUITY_FREE - Static variable in class nxopen.uf.UFModl.RefitFaceContinuity
-
- REFIT_FACE_CONTINUITY_G0 - Static variable in class nxopen.uf.UFModl.RefitFaceContinuity
-
- REFIT_FACE_CONTINUITY_G1 - Static variable in class nxopen.uf.UFModl.RefitFaceContinuity
-
- REFIT_FACE_CONTINUITY_G2 - Static variable in class nxopen.uf.UFModl.RefitFaceContinuity
-
- REFIT_FACE_REFIT_DIRECTION_NO_DIRECTION - Static variable in class nxopen.uf.UFModl.RefitFaceFitDirection
-
- REFIT_FACE_REFIT_DIRECTION_VIEW_DIRECTION - Static variable in class nxopen.uf.UFModl.RefitFaceFitDirection
-
- REFIT_FACE_REFIT_DIRECTION_XDIRECTION - Static variable in class nxopen.uf.UFModl.RefitFaceFitDirection
-
- REFIT_FACE_REFIT_DIRECTION_YDIRECTION - Static variable in class nxopen.uf.UFModl.RefitFaceFitDirection
-
- REFIT_FACE_REFIT_DIRECTION_ZDIRECTION - Static variable in class nxopen.uf.UFModl.RefitFaceFitDirection
-
- refitControl() - Method in interface nxopen.features.RefitFaceBuilder
-
Returns the refit control parameters - type, degree, patches, direction, tolerance
License requirements: None.
- refitControl() - Method in interface nxopen.features.SnipSurfaceBuilder
-
Returns the refit control
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- RefitControlBuilder - Interface in nxopen.geometricutilities
-
This class is used to specify the parameter set to refit faces .
- RefitControlBuilder.RefitControlDirection - Class in nxopen.geometricutilities
-
Refit direction
- RefitControlBuilder.RefitControlMethod - Class in nxopen.geometricutilities
-
Refit method
- refitDegree - Variable in class nxopen.uf.UFModl.SnipsrfFeatureData
-
- refitDirection() - Method in interface nxopen.geometricutilities.RefitControlBuilder
-
Returns the refit direction
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- RefitFace - Interface in nxopen.features
-
Represents a refit face feature
To create or edit an instance of this class, use
RefitFaceBuilder
Created in NX6.0.0
- RefitFaceBuilder - Interface in nxopen.features
-
- RefitFaceBuilder.Types - Class in nxopen.features
-
the type of face refit
- RefitFaceData() - Constructor for class nxopen.uf.UFModl.RefitFaceData
-
- RefitFaceData(Tag, UFModl.RefitFaceTargetData, int, int, int, int, int, int, UFModl.RefitFaceContinuity, UFModl.RefitFaceContinuity, UFModl.RefitFaceContinuity, UFModl.RefitFaceContinuity, double, double, double) - Constructor for class nxopen.uf.UFModl.RefitFaceData
-
- RefitFaceTargetData() - Constructor for class nxopen.uf.UFModl.RefitFaceTargetData
-
- RefitFaceTargetData(int, Tag[], UFModl.RefitFaceFitDirection, double) - Constructor for class nxopen.uf.UFModl.RefitFaceTargetData
-
- refitMethod() - Method in interface nxopen.geometricutilities.RefitControlBuilder
-
Returns the refit method
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- refitMethod - Variable in class nxopen.uf.UFModl.SnipsrfFeatureData
-
- refitPatches - Variable in class nxopen.uf.UFModl.SnipsrfFeatureData
-
- REFLECT_ONLY - Static variable in class nxopen.cae.NodeReflectBuilder.CopyType
-
Reflect only
- reflectAccuracy() - Method in interface nxopen.features.vehicledesign.ReflectionDataBuilder
-
Returns the customized reflection accuracy, which is the number of dispersed points for the input target objects
License requirements: None.
- REFLECTED_RADIATION - Static variable in class nxopen.cae.Result.Quantity
-
- Reflection - Interface in nxopen.display
-
Represents a
Reflection
Reflection defines the source of reflection in shiny objects for Studio
rendering style or High Quality Images.
- reflection() - Method in interface nxopen.display.Scene
-
Returns the reflection - use to define what will be reflected in shiny objects
License requirements: None.
- REFLECTION - Static variable in class nxopen.geometricanalysis.HighlightLinesAnalysisBuilder.DisplayMethods
-
Deprecated.
Create reflection lines
- REFLECTION - Static variable in class nxopen.geometricanalysis.HighlightLinesAnalysisBuilder.Types2
-
Create reflection lines
- Reflection.Type - Class in nxopen.display
-
where the reflections for rendering will be obtained
- ReflectionAnalysisBuilder - Interface in nxopen.geometricanalysis
-
Represents a Reflection Analysis builder.
- ReflectionAnalysisBuilder.ImageMovementTypes - Class in nxopen.geometricanalysis
-
The type of image movement.
- ReflectionAnalysisBuilder.ImageSizeOption - Class in nxopen.geometricanalysis
-
The reflection image size option.
- ReflectionAnalysisBuilder.LineImageTypes - Class in nxopen.geometricanalysis
-
The line image types.
- ReflectionAnalysisBuilder.LineOrientationType - Class in nxopen.geometricanalysis
-
The reflection line orientation.
- ReflectionAnalysisBuilder.LineThicknessType - Class in nxopen.geometricanalysis
-
The reflection line thickness.
- ReflectionAnalysisBuilder.NumberOfLinesOptions - Class in nxopen.geometricanalysis
-
The number of reflection lines.
- ReflectionAnalysisBuilder.SceneImageType - Class in nxopen.geometricanalysis
-
The reflection scene images.
- ReflectionAnalysisBuilder.Types - Class in nxopen.geometricanalysis
-
The types of images.
- ReflectionData - Interface in nxopen.features.vehicledesign
-
Represents a reflection data feature
To create or edit an instance of this class, use
ReflectionDataBuilder
Created in NX6.0.0
- ReflectionDataBuilder - Interface in nxopen.features.vehicledesign
-
- ReflectionDataBuilder.ReflectMethodType - Class in nxopen.features.vehicledesign
-
the reflection data option type
- ReflectionDataBuilder.ResolutionType - Class in nxopen.features.vehicledesign
-
the resolution type
- reflectionMap() - Method in interface nxopen.display.Reflection
-
Returns the reflection type
License requirements: None.
- reflectionObject() - Method in interface nxopen.features.vehicledesign.ReflectionDataBuilder
-
Returns the reflection object to reflect the input target objects
License requirements: None.
- REFLECTIVE - Static variable in class nxopen.display.Wall.MaterialType
-
Deprecated.
The wall is reflective.
- REFLECTIVE - Static variable in class nxopen.preferences.SessionModeling.SurfaceExtensionOption
-
- reflectivity() - Method in interface nxopen.display.EnvironmentBuilder
-
Returns the ground reflectivity
License requirements: studio_render ("UG STUDIO RENDER")
.
- reflectivity() - Method in interface nxopen.display.Wall
-
Returns the reflectivity of a wall - the percentage of the environment reflected off of the wall
License requirements: None.
- reflectivity - Variable in class nxopen.uf.UFDisp.SrfanlData
-
- reflectivityType() - Method in interface nxopen.display.DecalBuilder
-
Returns the reflectivity type
License requirements: None.
- reflectivityValue() - Method in interface nxopen.display.TrueShadingBuilder
-
Returns the reflectivity value
License requirements: None.
- reflectMethod() - Method in interface nxopen.features.vehicledesign.ReflectionDataBuilder
-
Returns the reflection data option type
License requirements: None.
- reflHorizVert - Variable in class nxopen.uf.UFDisp.SrfanlData
-
- refLineType - Variable in class nxopen.uf.UFModl.FlangeData
-
- reflMovePosition - Variable in class nxopen.uf.UFDisp.SrfanlData
-
- reflMoveType - Variable in class nxopen.uf.UFDisp.SrfanlData
-
- reflSmoothLines - Variable in class nxopen.uf.UFDisp.SrfanlData
-
- reflType - Variable in class nxopen.uf.UFDisp.SrfanlData
-
- reflUserImageFilename - Variable in class nxopen.uf.UFDisp.SrfanlData
-
- refNodeIndex - Variable in class nxopen.cae.CorrelSolution.CalculateComacsData
-
reference node index
- refNodesHaveSensors - Variable in class nxopen.cae.CorrelSolution.CalculateComacsData
-
indicates if nodes have a sensor (0=yes, 1=no)
- REFNONMASTER_STATE - Static variable in class nxopen.uf.UFClone.PartStateS
-
- refObject() - Method in interface nxopen.tooling.DirectUnbendBuilder
-
Returns the reference objects.
- refObject - Variable in class nxopen.uf.UFGexp.AskLengthParmsData
-
- refObjectType1() - Method in interface nxopen.features.StepBuilder
-
Returns the reference object type 1
License requirements: None.
- refObjectType2() - Method in interface nxopen.features.StepBuilder
-
Returns the reference object type 2
License requirements: None.
- refParallelLine() - Method in interface nxopen.features.shipdesign.StiffenerBySupportPathBuilder
-
Returns the referenced parallel line for stiffener by support path
License requirements: None.
- refPlane - Variable in class nxopen.uf.UFDisp.SrfanlData
-
- refPlanePosition() - Method in interface nxopen.cae.LaminateLayupOffsetBuilder
-
Returns the reference plane position expression
License requirements: None.
- refPlyId() - Method in interface nxopen.cae.LaminateMatOrientationBuilder
-
Returns a method to get reference ply id
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- refPnt - Variable in class nxopen.uf.UFCurve.Proj
-
- refPoint() - Method in interface nxopen.cae.NodalForceReportBuilder
-
Returns the reference point
License requirements: None.
- refPoint() - Method in interface nxopen.die.AddSurfBuilder
-
Returns the keep point for trimming.
- refPoint() - Method in interface nxopen.tooling.DieBaseBuilder
-
The action to specify the reference point for the die base
License requirements: None.
- refPointOption() - Method in interface nxopen.mechatronics.CamBuilder
-
Returns the cam disk reference point option.
- refPrompts - Variable in class nxopen.uf.UFModl.UdfsDefData
-
- refractionIndex() - Method in interface nxopen.features.vehicledesign.ReflectionDataBuilder
-
Returns the refraction index
License requirements: None.
- REFRACTIVE_INDEX - Static variable in class nxopen.cae.Result.Quantity
-
- REFRACTIVE_INDEX_GRADIENT - Static variable in class nxopen.cae.Result.Quantity
-
- refresh() - Method in interface nxopen.cae.DataSourceCollection
-
Refreshes any cache held by Application Specific Post Processing with regards to the managed Data Sources.
- refresh() - Method in interface nxopen.SketchConstraint
-
Refreshes the constraint data after its geometries are edited.
- refresh() - Method in interface nxopen.uf.UFDisp
-
- refresh() - Method in interface nxopen.uf.UFUiOnt
-
- refresh() - Method in interface nxopen.ViewCollection
-
Refreshes all the views in the current layout
License requirements: None.
- REFRESH_BEF_PATH_GENERATE - Static variable in class nxopen.uf.UFCamPref.CamPref
-
- REFRESH_BEF_PATH_REPLAY - Static variable in class nxopen.uf.UFCamPref.CamPref
-
- refreshAllReferences() - Method in interface nxopen.layout2d.ComponentDefinitionCollection
-
Refreshes all definition references in part to obtain the actual out-of-date status of components
License requirements: nx_layout ("NX Layout")
.
- refreshAssyPdiDate(Tag, boolean) - Method in interface nxopen.uf.UFUgmgr
-
- refreshAttributes() - Method in interface nxopen.pdm.DatabaseAttributeManager
-
Force load the Database Attributes from Teamcenter.
- refreshBeforeDisplayFlag() - Method in interface nxopen.cam.OperationDisplayOptionsBuilder
-
Returns the refresh before display flag
License requirements: None.
- refreshBefPath - Variable in class nxopen.uf.UFCam.Preferences
-
- refreshContent(String, String) - Method in interface nxopen.ame.CallMethodRuleBuilder
-
Update the builder of the reuse blocks
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- refreshCurrentSheet() - Method in interface nxopen.drawings.DrawingSheetCollection
-
Refresh the current Sheet
License requirements: drafting ("DRAFTING")
.
- refreshDefaultAttrs() - Method in interface nxopen.partfamily.TemplateManager
-
Repopulates required attributes in chosen list so that it updates as per the teamcenter customizations, if it has changed since last saved template.
- refreshDimension() - Method in interface nxopen.SketchConstraint
-
Refreshes the display of a sketch dimension
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- refreshFragmentBoundingBox(Sheet) - Method in interface nxopen.ame.DiagramManager
-
Creating or Updating fragment Sheet Bounding Box in Template
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- refreshFromExternalSource() - Method in interface nxopen.validate.Requirement
-
Refreshs a requirement from external source.
- refreshFromExternalSource(Requirement[]) - Method in interface nxopen.validate.RequirementCollection
-
Refreshes the requirements from external source.
- refreshFromTeamcenter(boolean, boolean) - Method in interface nxopen.mechatronics.MechatronicsManager
-
- refreshFromTeamcenter(boolean, boolean, boolean) - Method in interface nxopen.mechatronics.MechatronicsManager
-
Refreshes data model in system navigator from teamcenter.
- refreshLinkedGroups() - Method in interface nxopen.cae.Laminate
-
Refresh the laminate linked ply group state
License requirements: nx_lam_composites ("Laminate Composites")
.
- refreshLinkedGroups() - Method in interface nxopen.cae.LaminateGlobalLayup
-
Refresh the global layup linked ply group state
License requirements: nx_lam_composites ("Laminate Composites")
.
- refreshLists() - Method in interface nxopen.motion.MechatronicsBuilder
-
Updates the list of available inputs and outputs (for both MATLAB ans Amesim models) and Configuration Parametersa and port Variables (for Amesim only) from the selected HeaderFile/ModelFile
License requirements: mechanisms ("MECHANISMS")
.
- refreshModes() - Method in interface nxopen.cae.LaminateDynamicSim
-
This methods will refresh the dynamic simulation mode shapes,
when the results of the referenced solution have changed
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- refreshNavigator(int) - Method in interface nxopen.shipdesign.NavigatorCollection
-
Loads navigator models.
- refreshParameterDetail() - Method in interface nxopen.ame.CallMethodRuleBuilder
-
Refresh the content of the detail builder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- refreshPartNavigator() - Method in interface nxopen.PartCollection
-
- refreshPrecision() - Method in interface nxopen.mechatronics.PreferencesBuilder
-
Returns the inspector refresh precision.
- refreshRegisteredInstances() - Method in interface nxopen.mechatronics.PlcSimAdvClientBuilder
-
Refresh registered PLCSIMAdv instances.
- refreshRegisteredInstances(String[]) - Method in interface nxopen.mechatronics.SHMSignalClientBuilder
-
Refresh registered SHMSignal instances.
- refreshScreen() - Method in interface nxopen.features.SectionInertiaAnalysisBuilder
-
The function refreshes the graphic screen if any temporary graphics was previously generated by this command.
- refreshSelectedList(String, NXObject[]) - Method in interface nxopen.features.shipdesign.PenetrationSite
-
This method will get the selected list and load the requests in the list, then output the list.
- refreshStockData(StockData) - Method in interface nxopen.routing.StockDataRefreshBuilder
-
Update the Stock Data Definition
Requires an update to be applied after call.
- refRotationAngle() - Method in interface nxopen.formboard.OrientBranchBuilder
-
- refs - Variable in class nxopen.uf.UFModl.UdfsDefData
-
- refsetName - Variable in class nxopen.uf.UFAssem.AskComponentData
-
- refSetName - Variable in class nxopen.uf.UFAssem.AskRefSetData
-
- refSets - Variable in class nxopen.uf.UFAssem.AskRefSetsData
-
- refSymbolText - Variable in class nxopen.uf.UFPlist.Prefs
-
- REFTOOL - Static variable in class nxopen.cam.FlowBuilder.FlowOffsetModeType
-
Reference Tool Offsets
- refType() - Method in interface nxopen.cam.LaserLinearMove
-
Returns the Reference Type
License requirements: None.
- refType1() - Method in interface nxopen.features.ShelfBuilder
-
Returns the ref type1
License requirements: None.
- refType2() - Method in interface nxopen.features.ShelfBuilder
-
Returns the ref type2
License requirements: None.
- refVector - Variable in class nxopen.uf.UFDisp.SrfanlData
-
- REGARDLESS_OF_FEATURE_SIZE - Static variable in class nxopen.annotations.DatumReferenceBuilder.DatumReferenceMaterialCondition
-
regardless of size
- REGARDLESS_OF_FEATURE_SIZE - Static variable in class nxopen.annotations.FeatureControlFrameDataBuilder.ToleranceMaterialModifier
-
regardless of feature size condition
- REGARDLESSOF_FEATURE_SIZE - Static variable in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.PrimaryDatumDualMCMOptions
-
regardless of feature size
- REGARDLESSOF_FEATURE_SIZE - Static variable in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.PrimaryDatumMCMOptions
-
regardless of feature size
- REGARDLESSOF_FEATURE_SIZE - Static variable in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.SecondaryDatumDualMCMOptions
-
regardless of feature size
- REGARDLESSOF_FEATURE_SIZE - Static variable in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.SecondaryDatumMCMOptions
-
regardless of feature size
- REGARDLESSOF_FEATURE_SIZE - Static variable in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.TertiaryDatumDualMCMOptions
-
regardless of feature size
- REGARDLESSOF_FEATURE_SIZE - Static variable in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.TertiaryDatumMCMOptions
-
regardless of feature size
- REGARDLESSOF_FEATURE_SIZE - Static variable in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.ToleranceMCMOptions
-
regardless of feature size
- REGEN - Static variable in class nxopen.cam.CAMObject.Status
-
Object path must be regenerated
- REGEN_ALL - Static variable in class nxopen.uf.UFParam.Regen
-
- REGEN_NONE - Static variable in class nxopen.uf.UFParam.Regen
-
- REGEN_PATH - Static variable in class nxopen.uf.UFParam.Regen
-
- REGEN_POST - Static variable in class nxopen.uf.UFParam.Regen
-
- REGENERATE - Static variable in class nxopen.cam.CAMFeature.ProcessStatus
-
One or more of the feature's operation toolpaths need to regenerate
- regenerate() - Method in interface nxopen.View
-
Regenerates the display of given view.
- regenerate() - Method in interface nxopen.ViewCollection
-
Regenerates the display of each view in the current layout.
- regenerateAll() - Method in interface nxopen.RuleManager
-
Regenerate all rules.
- regenerateDisplay() - Method in interface nxopen.uf.UFDisp
-
- regenerateDisplayFacets(boolean) - Method in interface nxopen.BasePart
-
- regenerateDisplayFacets(boolean, boolean) - Method in interface nxopen.BasePart
-
Regenerates display specific cached facets in the part.
- reGenerateEntryExit(InspectionPathBuilder.EntryExitType) - Method in interface nxopen.cam.InspectionPathBuilder
-
ReGenerate entry or exit point
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- regenerateFromToleranceChange(boolean, boolean) - Method in interface nxopen.preferences.PartVisualizationLine
-
Regenerates after changing tolerance.
- regenerateFromToleranceChange(boolean, boolean) - Method in interface nxopen.preferences.VisualizationLine
-
- reGenerateInSafePlane(InspectionPathBuilder.FirstLastType) - Method in interface nxopen.cam.InspectionPathBuilder
-
ReGenerate first or last point in safe plane
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- regenerateShadedViewsFromToleranceChange() - Method in interface nxopen.preferences.PartVisualizationShade
-
Regenerates Shaded Views.
- regenerateShadedViewsFromToleranceChange() - Method in interface nxopen.preferences.SessionVisualizationShade
-
- regenerateStudioAnalysisViewsFromTolChange(boolean) - Method in interface nxopen.preferences.SessionVisualizationShade
-
- regenerateStudioAnalysisViewsFromToleranceChange(boolean) - Method in interface nxopen.preferences.PartVisualizationShade
-
Regenerates Studio Analysis Views.
- regenerateView(Tag) - Method in interface nxopen.uf.UFDisp
-
- regenFlag - Variable in class nxopen.uf.UFParam.IndexAttribute
-
- Region - Interface in nxopen.annotations
-
Represents a Region
To create or edit an instance of this class, use
RegionBuilder
Created in NX6.0.0
- region() - Method in interface nxopen.features.RegionListItemBuilder
-
Returns the region
License requirements: None.
- REGION - Static variable in class nxopen.gateway.ImageCaptureBuilder.CaptureMethodType
-
the region area
- region() - Method in interface nxopen.geometricutilities.SnipIntoPatchesBuilder
-
Returns the region to delete from the surface
License requirements: None.
- REGION - Static variable in class nxopen.tooling.MWDefineSheetsBuilder.Types
-
- REGION - Static variable in class nxopen.uf.UFGdt.GeometricDefinitionType
-
- region - Variable in class nxopen.uf.UFModlFeatures.AskCircularPatternFaceData
-
- region - Variable in class nxopen.uf.UFModlFeatures.AskFaceConstraintData
-
- region - Variable in class nxopen.uf.UFModlFeatures.AskLocalScaleData
-
- region - Variable in class nxopen.uf.UFModlFeatures.AskMirrorPatternFaceData
-
- region - Variable in class nxopen.uf.UFModlFeatures.AskMoveRegionData
-
- region - Variable in class nxopen.uf.UFModlFeatures.AskOffsetRegionData
-
- region - Variable in class nxopen.uf.UFModlFeatures.AskRectangularPatternFaceData
-
- REGION_BOUNDARY - Static variable in class nxopen.SelectionIntentRule.RuleType
-
- REGION_END_EVENT - Static variable in class nxopen.cam.ToolpathEventType
-
- REGION_FIRST - Static variable in class nxopen.cam.WedmCutOrderBuilder.Type
-
Cut region first
- REGION_LINK - Static variable in class nxopen.features.WaveLinkBuilder.Types
-
- REGION_OF_FACES - Static variable in class nxopen.cam.SurfaceRegions.FeatureTypes
-
type to region
- REGION_OF_FACES - Static variable in class nxopen.features.ExtractFaceBuilder.ExtractType
-
type to extract region
- REGION_POINTS - Static variable in class nxopen.cam.CutParametersRegionSequencingTypes
-
Follow Start Points
- REGION_START_EVENT - Static variable in class nxopen.cam.ToolpathEventType
-
- regionAssignToRegionOption() - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
Returns the option for assigning the selected region faces to the cavity or core region on the Region Tab page.
- regionBandBottomDistance() - Method in interface nxopen.cam.CutBand
-
Returns the Region Band Bottom Distance
License requirements: None.
- regionBandBottomNumber() - Method in interface nxopen.cam.CutBand
-
Returns the Region Band Bottom Number
License requirements: None.
- regionBandTopDistance() - Method in interface nxopen.cam.CutBand
-
Returns the Region Band Top Distance
License requirements: None.
- regionBandTopNumber() - Method in interface nxopen.cam.CutBand
-
Returns the Region Band Top Number
License requirements: None.
- regionBoundaryColor() - Method in interface nxopen.annotations.PmiPreferences
-
Returns the region boundary color
License requirements: None.
- regionBoundaryFont() - Method in interface nxopen.annotations.PmiPreferences
-
Returns the region boundary font
License requirements: None.
- RegionBoundaryRule - Interface in nxopen
-
- RegionBoundaryRule.Data - Class in nxopen
-
- regionBoundaryWidth() - Method in interface nxopen.annotations.PmiPreferences
-
Returns the region boundary width
License requirements: None.
- regionBounds() - Method in interface nxopen.tooling.DieEngFormTaskBuilder
-
Returns the edge region bounds
License requirements: None.
- RegionBoundsData() - Constructor for class nxopen.die.FillBuilder.RegionBoundsData
-
- RegionBoundsData() - Constructor for class nxopen.die.FlangeTaskBuilder.RegionBoundsData
-
- RegionBoundsData() - Constructor for class nxopen.die.FormTaskBuilder.RegionBoundsData
-
- RegionBuilder - Interface in nxopen.annotations
-
- RegionBuilder.AlignmentPosition - Class in nxopen.annotations
-
Specifies the anchor location of the region
- RegionBuilder.CrosshatchPatterns - Class in nxopen.annotations
-
Specifies the crosshatch pattern
- RegionBuilder.Types - Class in nxopen.annotations
-
Specifies the region type
- regionCavityRegionColor() - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
Returns the color for applying to the cavity region faces on the Region Tab page.
- regionCavityRegionTranslucency() - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
Returns the translucency for applying to the cavity region faces on the Region Tab page.
- regionColor() - Method in interface nxopen.drafting.AutomationPreferencesBuilder
-
Returns the region color
License requirements: None.
- regionConnection() - Method in interface nxopen.cam.DmBndBuilder
-
Returns the Region Connection
License requirements: None.
- regionConnection() - Method in interface nxopen.cam.MillCutParameters
-
Returns the region connection
License requirements: None.
- regionCoreRegionColor() - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
Returns the color for applying to the core region faces on the Region Tab page.
- regionCoreRegionTranslucency() - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
Returns the translucency for applying to the core region faces on the Region Tab page.
- RegionData() - Constructor for class nxopen.gateway.ImageCaptureBuilder.RegionData
-
- regionDistance() - Method in interface nxopen.cam.NcmSmoothingBuilder
-
Returns the region distance builder
License requirements: None.
- regionDistance() - Method in interface nxopen.facet.LocalOffsetBuilder
-
Returns the distance of the transition region with the constant offset option
License requirements: None.
- regionEdgeCurve() - Method in interface nxopen.features.GlobalShapingBuilder
-
Returns the region edge curve
License requirements: None.
- regionFaces() - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
Returns the faces selected for assigning to the cavity or core region.
- regionFaces() - Method in interface nxopen.tooling.TrimSolidBuilder
-
Returns the region faces to create trim solid.
- regionFont() - Method in interface nxopen.drafting.AutomationPreferencesBuilder
-
Returns the region font
License requirements: None.
- regionItemData() - Method in interface nxopen.features.shipdesign.OrientationDefinitionBuilder
-
Returns the regionItem builder.
- regionLimit() - Method in interface nxopen.geometricutilities.MatchSurfaceBuilder
-
Returns the distance limit of deformation region
License requirements: None.
- regionLimitCurve() - Method in interface nxopen.features.GlobalShapingBuilder
-
Returns the region limit curve
License requirements: None.
- regionList() - Method in interface nxopen.facet.DecimateFacetBodyBuilder
-
- regionList() - Method in interface nxopen.facet.SmoothFacetBodyBuilder
-
- regionList() - Method in interface nxopen.facet.SnipFacetBodyBuilder
-
Returns the list of regions to snip
License requirements: None.
- regionList() - Method in interface nxopen.facet.SubdivideFacetBodyBuilder
-
- regionList() - Method in interface nxopen.features.shipdesign.OrientationDefinitionBuilder
-
Returns the list containing all the defined regions.
- regionList() - Method in interface nxopen.features.VarOffsetFaceBuilder
-
Returns the region list
License requirements: None.
- RegionListItemBuilder - Interface in nxopen.features
-
- RegionListItemBuilder.Type - Class in nxopen.features
-
bridge continuity
- RegionListItemBuilderList - Interface in nxopen.features
-
Represents a list of objects.
- regionMachining() - Method in interface nxopen.cam.RoughFinishTurningBuilder
-
Returns the Region Machining type
License requirements: None.
- regionMethod() - Method in interface nxopen.cam.WedmBasedGeomBuilder
-
Returns the Tab Points Region Method
License requirements: cam_base ("CAM BASE")
.
- regionMethod() - Method in interface nxopen.cam.WedmGeomBuilder
-
Returns the Tab Points Region Method
License requirements: cam_base ("CAM BASE")
.
- regionMethod() - Method in interface nxopen.cam.WedmOperationBuilder
-
Returns the Tab Points Region Method
License requirements: cam_base ("CAM BASE")
.
- regionname - Variable in class nxopen.tooling.MWDefineRegionsBuilder.OrCreateEmptyRegionData
-
empty region object
- regionObject() - Method in interface nxopen.features.EmbossBodyBuilder
-
Returns the region object
License requirements: None.
- regionOption() - Method in interface nxopen.features.shipdesign.PlateBuilder
-
Returns the region option, which defines the plate areas in case of body faces as plate boundary.
- regionOption() - Method in interface nxopen.tooling.EnlargeSurfaceBuilder
-
Returns the value of the option, which specifies to keep or discard the selected region.
- regionPickPoint() - Method in interface nxopen.features.SnipSurfaceBuilder
-
Returns the 3D point picked on surface in Select Face
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- regionPoint() - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
Returns the point in product region
License requirements: None.
- regionPoint() - Method in interface nxopen.facet.SnipFacetBodyBuilder
-
Returns the point indicating the portion of the facet body with respect to specified region to be snipped.
- regionPoint() - Method in interface nxopen.features.shipdesign.PlateBuilder
-
Returns the region point, which is used to identify the plate region.
- RegionPoint - Interface in nxopen
-
Represents a point and body context on a region point.
- regionPoint() - Method in interface nxopen.tooling.TrimRegionBuilder
-
Returns the selection of region point, which will be kept or discarded as the result of trim region.
- regionPoint - Variable in class nxopen.uf.UFModl.AskExtrusionData
-
- regionPoint - Variable in class nxopen.uf.UFModl.AskRevolutionData
-
- RegionPointList - Interface in nxopen
-
Represents a list of objects.
- regionPointUv - Variable in class nxopen.uf.UFModl.SnipsrfFeatureData
-
- regions() - Method in interface nxopen.features.CombineSheetsBuilder
-
Returns the boolean region select object
License requirements: None.
- regions() - Method in interface nxopen.features.shipdesign.PlateBuilder
-
Returns the regions to create plates
License requirements: None.
- regions() - Method in interface nxopen.features.shipdesign.PlateSystemBuilder
-
Returns the regions selected from the sheet, that has the inscribed boundaries, to keep for the final
plate system shape.
- regions() - Method in interface nxopen.features.TrimSheetBuilder
-
Returns the regions
License requirements: None.
- regionSectionList() - Method in interface nxopen.features.ThickenBuilder
-
Returns the list of SC_section
The sections with corresponding expression for the Thicken feature
License requirements: None.
- regionSelectCrossoverRegionFaces() - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
Returns the option for including or removing the crossover region faces in the selection on the Region Tab page.
- regionSelectCrossoverVerticalFaces() - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
Returns the option for including or removing the crossover vertical faces in the selection on the Region Tab page.
- regionSelection() - Method in interface nxopen.annotations.PmiDatumTargetBuilder
-
Returns the region selection
License requirements: None.
- regionSelection() - Method in interface nxopen.cam.RoughFinishTurningBuilder
-
Returns the Region Selection type
License requirements: None.
- regionSelection() - Method in interface nxopen.tooling.EnlargeSurfaceBuilder
-
Returns the selection of region, which will be kept or discarded as the result of enlarged surface.
- regionSelectionPoint() - Method in interface nxopen.cam.RoughFinishTurningBuilder
-
Returns the Region Selection Point
License requirements: None.
- regionSelectUnknownFaces() - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
Returns the option for including or removing the unknown faces in the selection on the Region Tab page.
- regionSequencing() - Method in interface nxopen.cam.MillCutParameters
-
Returns the region resequencing
License requirements: None.
- regionSetRegionsColor() - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
Action button for setting color on the cavity, core and undefined region faces on the Region Tab page.
- regionShowIncompleteLoops() - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
Returns the option for turning on/off the highlight of the incomplete loop edges.
- regionShowInternalLoops() - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
Returns the option for turning on/off the highlight of the internal loop edges.
- regionShowPartingEdges() - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
Returns the option for turning on/off the highlight of the parting edges.
- regionSpecified - Variable in class nxopen.uf.UFModl.AskExtrusionData
-
- regionSpecified - Variable in class nxopen.uf.UFModl.AskRevolutionData
-
- regionStartAngle() - Method in interface nxopen.cam.NcmHoleMachining
-
Returns the region start angle
License requirements: None.
- regionToDeform() - Method in interface nxopen.features.GlobalShapingBuilder
-
Returns the region to deform
License requirements: None.
- regionToDeformOffset() - Method in interface nxopen.features.GlobalShapingBuilder
-
Returns the region boundary offset
License requirements: None.
- regionToPierce() - Method in interface nxopen.features.ThickenBuilder
-
Returns the section for regions to pierce
The section associated for the Thicken feature
License requirements: None.
- RegionTracker - Interface in nxopen.geometricutilities
-
a class which collects all the geometric entities used to identify a region of faces during a boolean feature.
- RegionTracker.ExtremityType - Class in nxopen.geometricutilities
-
This enum represents the type of edge extremity.
- RegionTracker.VertexSelectorsData - Class in nxopen.geometricutilities
-
- regionType() - Method in interface nxopen.features.RegionListItemBuilder
-
Returns the region type
License requirements: None.
- regionType() - Method in interface nxopen.tooling.TrimRegionBuilder
-
Returns the value of the option, which specifies to keep or discard the selected region.
- regionUndefinedRegionColor() - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
Returns the color for applying to the undefined region faces on the Region Tab page.
- regionWidth() - Method in interface nxopen.drafting.AutomationPreferencesBuilder
-
Returns the region width
License requirements: None.
- registerAddCustomPopupMenuCallback(CustomPopupMenuHandler.AddCustomPopupMenuCallback) - Method in interface nxopen.CustomPopupMenuHandler
-
Registers the add_custom_popup_menu_callback callback method with the popup menu
handler object.
- registerApplication(String, MenuBarManager.InitializeMenuApplication, MenuBarManager.EnterMenuApplication, MenuBarManager.ExitMenuApplication, boolean, boolean, boolean) - Method in interface nxopen.menubar.MenuBarManager
-
Registers the application
License requirements: None.
- registerApplicationCallback(String, Generator.ShipCustomerEnterApplication, Generator.ShipCustomerExitApplication) - Method in interface nxopen.shipdesign.Generator
-
Register application callback when application is entered or exited.
- registerApplicationForModlFeatureEdit(String) - Method in interface nxopen.shipdesign.ApplicationUtils
-
Register button in other application
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- registerBasicEffectivityBuilder(BasicEffectivityBuilder) - Method in interface nxopen.EffectivityConditionBuilder
-
Registers the
BasicEffectivityBuilder
to make sure its effectivity formula
string is always updated and in sync with the effectivity formula string of this class.
- registerButtonApplication(int, String) - Method in interface nxopen.shipdesign.ApplicationUtils
-
Register button in other application
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- registerCallbackFunctionsForMirrorCopy() - Method in interface nxopen.features.ShipCollection
-
Registers callback functions used for mirror copy ship structure
License requirements: nx_ship_detail ("Ship Detail Design")
.
- registerCleanup() - Method in interface nxopen.cae.aerostructures.LoadCaseListBuilder
-
Register the removable of orphaned load cases
License requirements: nx_masterfem ("Finite Element Modeling")
.
- registerColumn(int, MarginResultTableDataProvider.ColumnType) - Method in interface nxopen.cae.aerostructures.MarginResultTableDataProvider
-
Register a new column
License requirements: nx_masterfem ("Finite Element Modeling")
.
- registerConfigureContextMenuCallback(String, String, MenuBarManager.ConfigureContextMenu) - Method in interface nxopen.menubar.MenuBarManager
-
Registers a callback that is called whenever a customizable context
menu is about to be displayed.
- registerCustomApp(int) - Method in interface nxopen.uf.UFRoute
-
- registerCustomPopupMenuInvokedCallback(CustomPopupMenuHandler.CustomPopupMenuInvokedCallback) - Method in interface nxopen.CustomPopupMenuHandler
-
Registers the add_custom_popup_menu_callback callback method with the popup menu
handler object.
- registerCustomWebAppInvokedCallback(CustomWebAppMenuHandler.CustomWebAppInvokedCallback) - Method in interface nxopen.pdm.CustomWebAppMenuHandler
-
Registers the add_custom_web_app_menu_callback callback method with the webApp menu
handler object.
- registerEvaluate(String, int, MethodLibrary.Callback) - Method in interface nxopen.cae.aerostructures.author.MethodLibrary
-
Routine to register an evaluate callback
License requirements: None.
- registerNavigator(int, String, String, String) - Method in interface nxopen.shipdesign.NavigatorCollection
-
Registers the navigator.
- registerNodeContextMenuItem(String, String, Navigator.NodeContextMenuItemActionCallback, Navigator.NodeContextMenuItemVisibilityCallback, Navigator.NodeContextMenuItemDefaultMenuItemCallback) - Method in interface nxopen.shipdesign.Navigator
-
Registers node context menu.
- registerNodesContextMenuItem(String, String, Navigator.NodesContextMenuItemActionCallback, Navigator.NodesContextMenuItemVisibilityCallback, Navigator.NodesContextMenuItemDefaultMenuItemCallback) - Method in interface nxopen.shipdesign.Navigator
-
Registers multiple nodes context menu.
- registerOnSelectionChangeCallback(SelectionSubscriber.OnSelectionChangeCallback) - Method in interface nxopen.SelectionSubscriber
-
Register a callback which is called at the end of a series of changes to the set of
selected objects.
- registerProperty(String, String, VisualReport.ScopeTypeOption, VisualReport.ObjectTypeOption[], Property.DatatypeOption, boolean, boolean, VisualReportManager.GetStringTypePropertyValue) - Method in interface nxopen.visualreporting.VisualReportManager
-
Registers a string type property.
- registerProperty(String, String, VisualReport.ScopeTypeOption, VisualReport.ObjectTypeOption[], Property.DatatypeOption, boolean, boolean, VisualReportManager.GetIntegerTypePropertyValue) - Method in interface nxopen.visualreporting.VisualReportManager
-
Registers an integer type property.
- registerProperty(String, String, VisualReport.ScopeTypeOption, VisualReport.ObjectTypeOption[], Property.DatatypeOption, boolean, boolean, VisualReportManager.GetRealTypePropertyValue) - Method in interface nxopen.visualreporting.VisualReportManager
-
Registers a double type property.
- registerProperty(String, String, VisualReport.ScopeTypeOption, VisualReport.ObjectTypeOption[], Property.DatatypeOption, boolean, boolean, VisualReportManager.GetBooleanTypePropertyValue) - Method in interface nxopen.visualreporting.VisualReportManager
-
Registers a boolean type property.
- registerProperty(String, String, VisualReport.ScopeTypeOption, VisualReport.ObjectTypeOption[], Property.DatatypeOption, boolean, boolean, VisualReportManager.GetDateTypePropertyValue) - Method in interface nxopen.visualreporting.VisualReportManager
-
- registerReplacePartLoadStatus() - Method in interface nxopen.assemblies.ReplaceComponentBuilder
-
Register the part load status with the replace operation.
- registerUndoIds(int) - Method in interface nxopen.tooling.MWPartingManagerBuilder
-
Register the UNDO identifiers.
- registerUserButton(String, String, String, PostProcess.UserFunctionBeforeDialogDestroy) - Method in interface nxopen.motion.PostProcess
-
Register user button for post process.
- registerUserDefinedUIBlock(BlockDialog, String) - Method in interface nxopen.blockstyler.BlockDialog
-
Registers the reusable block with the dialog
License requirements: None.
- registerValidate(String, int, MethodLibrary.Callback) - Method in interface nxopen.cae.aerostructures.author.MethodLibrary
-
Routine to register a validate callback
License requirements: None.
- registerViewContextMenuItem(String, String, Navigator.ViewContextMenuItemActionCallback, Navigator.ViewContextMenuItemVisibilityCallback) - Method in interface nxopen.shipdesign.Navigator
-
Registers view context menu.
- registerWithUiMenu(boolean) - Method in interface nxopen.uistyler.Dialog
-
Registers the dialog with a menu item.
- registerWtcPostUndoCallback(int) - Method in interface nxopen.tooling.MWPartingManagerBuilder
-
Register or unregister the post UNDO callback function for the Wall Thickness Checker.
- REGRESS - Static variable in class nxopen.HumanData.StatureType
-
Indicate stature value is computed
- REGRESS - Static variable in class nxopen.HumanData.WeightType
-
Indicate weight value is computed
- REGULAR - Static variable in class nxopen.annotations.ForeshorteningSymbolSettingsBuilder.SymbolType
-
- REGULAR - Static variable in class nxopen.cae.Laminate.ZoneType
-
Regular valid zone
- REGULAR - Static variable in class nxopen.drawings.BrokenViewBuilder.TypeBreak
-
Regular Break
- REGULAR - Static variable in class nxopen.features.TextBuilder.FontStyleOptions
-
Regular style
- REGULAR - Static variable in class nxopen.GroupBuilder.SketchType
-
Regular sketch group that can contain any sketch curve or dimension
- REGULAR - Static variable in class nxopen.preferences.VisualizationFonts.StyleType
-
Regular or normal font style
- REGULAR_EXPRESSION_OPERATOR - Static variable in class nxopen.visualreporting.Condition.OperatorOption
-
- reinforcementCornerCut() - Method in interface nxopen.features.shipdesign.SplitStandardPartBuilder
-
Returns the corner cut at the reinforcement point.
- reinforcementDirection() - Method in interface nxopen.features.shipdesign.BracketBuilder
-
Returns the install direction on reinforcement face.
- reinforcementFace() - Method in interface nxopen.features.shipdesign.BracketBuilder
-
Returns the reinforcement face.
- reinforcementStiffener() - Method in interface nxopen.features.shipdesign.BracketBuilder
-
Returns the reinforcement stiffener.
- reinforcementType() - Method in interface nxopen.routing.DuctReinforcementBuilder
-
Returns the type of reinforcement
License requirements: routing_hvac ("Routing HVAC")
.
- reinforceOffset() - Method in interface nxopen.features.shipdesign.SplitStandardPartBuilder
-
Returns the offset value to the split location on the standard part reinforcement.
- reinit(Tag, Tag) - Method in interface nxopen.uf.UFParam
-
- reinitialize() - Method in interface nxopen.die.AddendumSectionBuilder
-
Reinitialize the environment after changes to input data such as draw vector or product faces
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- reinitializePlane() - Method in interface nxopen.geometricanalysis.HighlightLinesAnalysisBuilder
-
- reinitOpt(String) - Method in interface nxopen.uf.UFCam
-
- reinitSession(String) - Method in interface nxopen.uf.UFCam
-
- reinstateTransience() - Method in interface nxopen.BasePart
-
Reinstate the transient status to the formerly transient input part
License requirements: None.
- REJECT - Static variable in class nxopen.blockstyler.Tree.EditControlOption
-
Use this option to disallow edit.
- REJECT_TEXT - Static variable in class nxopen.blockstyler.Tree.EndLabelEditState
-
Use this option to reject the edited text and retain the previous one.
- REJECTED - Static variable in class nxopen.validate.OverrideBuilder.DecisionActions
-
- rejectedpointcount - Variable in class nxopen.cam.InspectionMeasDataBuilder.AcceptRejectExternalPointsData
-
the number of points rejected
- rejectionThreshold() - Method in interface nxopen.features.FitCurveBuilder
-
Returns the rejection threshold
License requirements: None.
- rejectionThresholdValue() - Method in interface nxopen.features.FitSurfaceBuilder
-
Returns the rejection threshold value
License requirements: None.
- relabelByOffsets(int, int, int) - Method in interface nxopen.cae.SimPart
-
Relabels the csys, physical, and group labels by the specified offset value
License requirements: nx_masterfem ("Finite Element Modeling")
.
- relabelOption() - Method in interface nxopen.cae.LaminateRelabelPliesBuilder
-
Returns the relabeling option
License requirements: None.
- related - Variable in class nxopen.uf.UFStd.StlError
-
- RELATED_OBJECT - Static variable in class nxopen.Information.DisplayFeatureType
-
Displays related(dual) object information.
- RelatedCurveMethod - Interface in nxopen.cae
-
Represents the output from the related curve smart selector method
To obtain an instance of this class use CAE::SmartSelectionManager
.
- RelatedEdgeMethod - Interface in nxopen.cae
-
Represents the output from the related edge smart selector method
To obtain an instance of this class use CAE::SmartSelectionManager
.
- RelatedElemEdgeMethod - Interface in nxopen.cae
-
Represents the output from the related element edge smart selector method
To obtain an instance of this class use CAE::SmartSelectionManager
.
- RelatedElemFaceMethod - Interface in nxopen.cae
-
Represents the output from the related element face smart selector method
To obtain an instance of this class use CAE::SmartSelectionManager
.
- RelatedElemMethod - Interface in nxopen.cae
-
Represents the output from the related element smart selector method
To obtain an instance of this class use CAE::SmartSelectionManager
.
- relatedFace() - Method in interface nxopen.features.ShowRelatedFacesBuilder
-
Returns the related face
License requirements: None.
- RelatedFaceMethod - Interface in nxopen.cae
-
Represents the output from the related face smart selector method
To obtain an instance of this class use CAE::SmartSelectionManager
.
- RelatedNodeMethod - Interface in nxopen.cae
-
Represents the output from the related node smart selector method
To obtain an instance of this class use CAE::SmartSelectionManager
.
- RelatedVertexMethod - Interface in nxopen.cae
-
Represents the output from the related vertex smart selector method
To obtain an instance of this class use CAE::SmartSelectionManager
.
- relation() - Method in interface nxopen.CGMBuilder
-
Returns the relation to be used when exporting a CGM to Teamcenter
License requirements: None.
- relation() - Method in interface nxopen.PrintPDFBuilder
-
Returns the relation to be used when exporting a PDF to Teamcenter
License requirements: None.
- relationalOperatorOption() - Method in interface nxopen.validate.RequirementBuilder
-
Returns the relational operator option between expression label and the value in single sided comparison
License requirements: None.
- relationalOperatorOptionOnMaximumValue() - Method in interface nxopen.validate.RequirementBuilder
-
Returns the relational operator between expression label and maximum value in double sided comparison:
[expression] < or <= maximum value.
- relationalOperatorOptionOnMinimumValue() - Method in interface nxopen.validate.RequirementBuilder
-
Returns the relational operator between minimum value and expression label in double sided comparison:
minimum value < or <= [expression].
- relationScope() - Method in interface nxopen.features.CurveFinderBuilder
-
Returns a value that indicates what kind of relations are needed to recognize
License requirements: None.
- relationScope() - Method in interface nxopen.features.FaceRecognitionBuilder
-
Returns a value that indicates what kind of relations are needed to recognize
License requirements: None.
- relationshipType() - Method in interface nxopen.routing.DeviceRelationship
-
Returns the type of the relationship.
- relationshipType() - Method in interface nxopen.routing.InterfaceTerminalRelationshipBase
-
- relationType() - Method in interface nxopen.drawings.MarkAsTemplateBuilder
-
Returns the relation type is required only for the managed mode.
- relationType() - Method in interface nxopen.FileNew
-
Returns the relation type of the underlying template which is used for the new file being created.
- RELATIVE - Static variable in class nxopen.cae.BoltBuilder.SpiderDiameter
-
Specifies spider diameter relative to hole diameter
- RELATIVE - Static variable in class nxopen.cae.CircularImprintBuilder.AroundEdgeDiaType
-
Relative Value
- RELATIVE - Static variable in class nxopen.cae.LaminateDynamicEventBuilder.ReferenceTypeEnum
-
- RELATIVE - Static variable in class nxopen.cae.LaminateRandomEventBuilder.ReferenceEnum
-
Deprecated.
- RELATIVE - Static variable in class nxopen.cae.optimization.TBSConstraintBuilder.MagnitudeType
-
Constraints could be given in relative values
- relative() - Method in interface nxopen.cae.responsesimulation.PrlResultsEvaluationSettingBuilder
-
Returns the option of using the observation node in evaluation
License requirements: nx_response_anlys ("NX Response Analysis")
.
- RELATIVE - Static variable in class nxopen.cae.Result.DiscontinuityMethod
-
relative discontiuity
- RELATIVE - Static variable in class nxopen.cam.ToolAxisInterpolate.TurnInterpolationMethodTypes
-
Relative
- RELATIVE - Static variable in class nxopen.diagramming.DiagrammingLocationstyle
-
Relative
- RELATIVE - Static variable in class nxopen.features.AestheticFaceBlendBuilder.RhoType
-
Relative Rho: it's the ratio of BaseRadius/(BaseRadius + CenterRadius)
- RELATIVE - Static variable in class nxopen.features.EdgeBlendBuilder.Rhotype
-
- RELATIVE - Static variable in class nxopen.features.FaceBlendBuilder.RhoMethod
-
Relative (I-deas) rho type
- RELATIVE - Static variable in class nxopen.features.StudioXformBuilder.FeatureType
-
Deprecated.
Relative feature type of Xform
- RELATIVE - Static variable in class nxopen.features.StudioXformBuilderEx.FeatureType
-
Relative feature type of Xform
- RELATIVE - Static variable in class nxopen.features.vehicledesign.BaseDataLoadingWheelBuilder.DataDefinitionOptions
-
Relative: The wheel data of this loading will use relative values to design data.
- RELATIVE - Static variable in class nxopen.JtCreator.ChordalValue
-
RELATIVE
- RELATIVE - Static variable in class nxopen.motion.GraphBuilder.CsysChoices
-
Deprecated.
Relative
- RELATIVE - Static variable in class nxopen.motion.MotionSensorBuilder.Reference
-
relative reference frame
- RELATIVE - Static variable in class nxopen.motion.PackagingTraceBuilder.Frame
-
Traced copies positioned relative to selected links.
- RELATIVE_ANGLE - Static variable in class nxopen.cam.ToolPathTiltTilting.ToolAxisTypes
-
Tool axis mode: relative MCS
- RELATIVE_CENTERLINE - Static variable in class nxopen.uf.UFModl.BeadAngleRelative
-
- RELATIVE_COARSENING - Static variable in class nxopen.cae.CfdAutoRefinementConstraintBuilder.Sizing
-
Set relative coarsening through local subdivisions
- RELATIVE_COARSENING - Static variable in class nxopen.cae.CfdContactPreventionConstraintBuilder.Sizing
-
- RELATIVE_COARSENING - Static variable in class nxopen.cae.CfdLocalResolutionConstraintBuilder.Sizing
-
- RELATIVE_CYCLIC - Static variable in class nxopen.mechatronics.CamProfileBuilder.ProfileCyclicType
-
In Relative Cyclic Cam Profiles the start point and
end point of the profile do not necessarily have to be
equal.
- RELATIVE_CYCLIC - Static variable in class nxopen.mechatronics.MotionProfileBuilder.ProfileCyclicType
-
Relative Cyclic
- RELATIVE_DISPLACEMENT - Static variable in class nxopen.cae.Result.Quantity
-
- RELATIVE_FLOW - Static variable in class nxopen.routing.SplitDuctBuilder.FlowTypes
-
Relative flow
- RELATIVE_HUMIDITY - Static variable in class nxopen.cae.Result.Quantity
-
- RELATIVE_LINEAR - Static variable in class nxopen.cam.TurnEngageRetractBuilder.Types
-
Relative Linear
- RELATIVE_PRESSURE - Static variable in class nxopen.cae.Result.Quantity
-
- RELATIVE_REFINEMENT - Static variable in class nxopen.cae.CfdAutoRefinementConstraintBuilder.Sizing
-
Set relative refinement through local subdivisions
- RELATIVE_REFINEMENT - Static variable in class nxopen.cae.CfdContactPreventionConstraintBuilder.Sizing
-
- RELATIVE_REFINEMENT - Static variable in class nxopen.cae.CfdLocalResolutionConstraintBuilder.Sizing
-
- RELATIVE_ROTATION - Static variable in class nxopen.cae.Result.Quantity
-
- RELATIVE_TANGENT - Static variable in class nxopen.uf.UFModl.BeadWidthRelative
-
- RELATIVE_THEORETICAL - Static variable in class nxopen.uf.UFModl.BeadWidthRelative
-
- RELATIVE_TO_DRIVE - Static variable in class nxopen.cam.ToolAxisVariable.Types
-
Relative to Drive
- RELATIVE_TO_FACE - Static variable in class nxopen.SketchAlongPathBuilder.SketchOrientationType
-
Relative to face
- RELATIVE_TO_GEOMETRY - Static variable in class nxopen.annotations.AssociativeOriginType
-
- RELATIVE_TO_PART - Static variable in class nxopen.cam.ToolAxisVariable.Types
-
Relative to Part
- RELATIVE_TO_VECTOR - Static variable in class nxopen.cam.ToolAxisVariable.Types
-
Relative to Vector
- RELATIVE_TO_VIEW - Static variable in class nxopen.annotations.AssociativeOriginType
-
- RELATIVE_TO_WCS - Static variable in class nxopen.features.TrimCurveBuilder.InteresectionDirectionOptions
-
Relative to WCS
- RELATIVE_VELOCITY - Static variable in class nxopen.cae.Result.Quantity
-
- RELATIVE_WALL - Static variable in class nxopen.uf.UFModl.BeadAngleRelative
-
- relativeAttributeBuilder() - Method in interface nxopen.ame.ExtractAttributeBuilder
-
Returns the relative attribute builder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- relativeConvergence() - Method in interface nxopen.cae.optimization.DAOStopCondition
-
Returns the relative convergence
License requirements: None.
- relativeConvergenceCriteria() - Method in interface nxopen.optimization.OptimizationBuilder
-
Returns the relative criteria for optimizer
to determine convergence.
- relativeDateString() - Method in interface nxopen.visualreporting.SpecifyDateBuilder
-
Returns the current relative date string
License requirements: None.
- relativeEndBlendEndPoint() - Method in interface nxopen.features.AestheticFaceBlendBuilder
-
Returns the relative end point on the washout curve of end blend.
- relativeEndBlendStartPoint() - Method in interface nxopen.features.AestheticFaceBlendBuilder
-
Returns the relative start point on the washout curve of end blend.
- relativeLinkAttachment() - Method in interface nxopen.motion.ControlInputBuilder
-
Returns the relative link attachment and its components are optional.
- relativeLocation() - Method in interface nxopen.annotations.HoleTableSettingsLabelBuilder
-
Returns the relative location of hole label
License requirements: None.
- relativeMarker() - Method in interface nxopen.motion.MotionSensorBuilder
-
Returns the second marker object
License requirements: None.
- relativeMotion() - Method in interface nxopen.tooling.MotionSimulationBuilder
-
Returns the hide motion item toggle, which specifies whether to remove the motion item from the tree list if there is no mounted component in it
License requirements: None.
- relativeNode() - Method in interface nxopen.cae.responsesimulation.NodalFunctionEvaluationSettingBuilder
-
Returns the relative node
License requirements: nx_response_anlys ("NX Response Analysis")
.
- relativeOrder - Variable in class nxopen.cae.AfuMathFastRMSInfo.Data
-
the relative order
- relativePercentX() - Method in interface nxopen.pid.PortEquipmentBuilder
-
Returns the X percentage of location relative to the node.
- relativePercentY() - Method in interface nxopen.pid.PortEquipmentBuilder
-
Returns the Y percentage of location relative to the node.
- relativeStartBlendEndPoint() - Method in interface nxopen.features.AestheticFaceBlendBuilder
-
Returns the relative end point on the washout curve of start blend.
- relativeStartBlendStartPoint() - Method in interface nxopen.features.AestheticFaceBlendBuilder
-
Returns the relative start point on the washout curve of start blend.
- relativeStatus - Variable in class nxopen.uf.UFSf.ResultingFacePairs
-
- RELATIVETO_PCS - Static variable in class nxopen.cam.CamInspectionOperationCsysreferencetypes
-
Relative to Part Coordinate System
- RELATIVETO_PCS - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.SirVecPCSABS
-
Relative to PCS
- relativeValueX() - Method in interface nxopen.pid.PortEquipmentBuilder
-
Returns the X offset value of location relative to the node.
- relativeValueY() - Method in interface nxopen.pid.PortEquipmentBuilder
-
Returns the Y offset value of location relative to the node.
- RELAXATION_LINEAR - Static variable in class nxopen.motion.TirePropertyTnoBuilder.DynamicsType
-
- RELAXATION_NON_LINEAR - Static variable in class nxopen.motion.TirePropertyTnoBuilder.DynamicsType
-
- relaxationLength() - Method in interface nxopen.motion.TirePropertyAdvancedParameters
-
Returns the relaxation length.
- relaxedPosition() - Method in interface nxopen.mechatronics.AngularSpringJointBuilder
-
Returns the relaxed position.
- relaxedPosition() - Method in interface nxopen.mechatronics.LinearSpringJointBuilder
-
Returns the relaxed position.
- relaxedPosition() - Method in interface nxopen.mechatronics.SpringDamperBuilder
-
Returns the relaxed position.
- Relay - Interface in nxopen.mechatronics
-
Represents the Relay.
- RelayBuilder - Interface in nxopen.mechatronics
-
Represents a
Relay
builder.
- RelayCollection - Interface in nxopen.mechatronics
-
Represents a collection of Relay.
- relays() - Method in interface nxopen.mechatronics.PhysicsManager
-
- release(String, String) - Method in interface nxopen.LicenseManager
-
Release a license against the specified license context.
- release(String, String) - Method in interface nxopen.uf.UF
-
- releaseAll(String) - Method in interface nxopen.LicenseManager
-
Release all licenses against the specified license context.
- releaseAll(String) - Method in interface nxopen.uf.UF
-
- releaseAllProductFeatureData() - Method in interface nxopen.tooling.MoldFeatureRecognitionBuilder
-
Free all product feature data
License requirements: None.
- releaseDeleteProtection() - Method in interface nxopen.SmartObject
-
Removes delete protection from the SmartObject.
- releaseSuppression(Component[], Arrangement[]) - Method in interface nxopen.assemblies.ComponentAssembly
-
Release control of the suppression state of an array of components.
- releaseSuppression(Component[]) - Method in interface nxopen.assemblies.ComponentAssembly
-
Release control of the suppression state of an array of components.
- relief() - Method in interface nxopen.die.MachineReliefBuilder
-
Returns the expression containing the value to apply for the machine relief operation to create the tool solid.
- RELIEF - Static variable in class nxopen.die.MachineReliefBuilder.Types
-
Remove casting material to allow for clearance between two mating objects (such as the upper and lower castings).
- relief() - Method in interface nxopen.die.PadChildBuilder
-
Returns the relief switch of the die pad, if true the relief will be built around the pad, if false it will not.
- relief() - Method in interface nxopen.die.PadParentBuilder
-
Returns the relief switch of die pads, if true the relief will be built around the pads, if false they will not.
- RELIEF - Static variable in class nxopen.features.sheetmetal.ClosedCornerBuilder.Types
-
- reliefAngle() - Method in interface nxopen.die.DrawDiePunchSectionBuilder
-
Returns the relief angle of the draw die punch casting.
- reliefAngle() - Method in interface nxopen.die.SteelInsertSectionBuilder
-
Returns the relief angle
License requirements: ug_die_design ("Die Design")
.
- reliefAngle() - Method in interface nxopen.die.SteelInsertSegmentChildBuilder
-
Returns the relief angle
License requirements: ug_die_design ("Die Design")
.
- reliefAngle() - Method in interface nxopen.die.SteelInsertSegmentParentBuilder
-
Returns the relief angle
License requirements: ug_die_design ("Die Design")
.
- reliefAngle() - Method in interface nxopen.tooling.DieDesDrawPunchBuilder
-
Returns the relief angle thickness, which is used for define the relief angle of the punch.
- reliefAngleBuilder() - Method in interface nxopen.cam.TurnToolBuilder
-
Returns the relief angle (inheritable double)
License requirements: cam_base ("CAM BASE")
.
- reliefAngleType() - Method in interface nxopen.cam.TurnToolBuilder
-
Returns the relief angle type
License requirements: None.
- reliefAttributes() - Method in interface nxopen.die.HeelpostBuilder
-
Returns the relief attributes
License requirements: None.
- reliefChamferEnabled() - Method in interface nxopen.features.HolePackageBuilder
-
Returns the threaded relief chamfer enabled - this is applicable for threaded hole type
License requirements: None.
- reliefChamferEnabled() - Method in interface nxopen.geometricutilities.EndHoleData
-
Returns the threaded relief chamfer enabled - this is applicable for threaded hole type
License requirements: None.
- ReliefCut - Interface in nxopen.cam
-
Represents the relief cut .
- reliefCut() - Method in interface nxopen.cam.TurnCutParameters
-
Returns the relief cut
License requirements: None.
- ReliefCut.DepthUnits - Class in nxopen.cam
-
the relief cut depth unit options .
- ReliefCut.DistanceUnits - Class in nxopen.cam
-
the relief cut distance unit options .
- ReliefCut.Modes - Class in nxopen.cam
-
the relief cut options .
- reliefDepth() - Method in interface nxopen.die.CastReliefBuilder
-
Returns the depth value of the relief
License requirements: None.
- reliefDepth() - Method in interface nxopen.die.CastReliefParentBuilder
-
Returns the relief depth of cast relief.
- reliefDepth() - Method in interface nxopen.die.HeelpostBuilder
-
Returns the relief depth
License requirements: None.
- reliefDepth() - Method in interface nxopen.die.PadChildBuilder
-
Returns the relief depth of the die pad.
- reliefDepth() - Method in interface nxopen.die.PadParentBuilder
-
Returns the relief depth of die pads.
- reliefDepth() - Method in interface nxopen.geometricutilities.StartHoleData
-
Returns the relief depth
License requirements: None.
- reliefDesign() - Method in interface nxopen.tooling.ToolingManager
-
Returns the ReliefDesign instance belonging to this part .
- ReliefDesignBuilder - Interface in nxopen.tooling
-
- ReliefDesignBuilder.Method - Class in nxopen.tooling
-
The relief design creation method.
- ReliefDesignBuilder.MethodOfDelete - Class in nxopen.tooling
-
The relief design delete method.
- ReliefDesignBuilder.Types - Class in nxopen.tooling
-
The relief design type.
- ReliefDesignCollection - Interface in nxopen.tooling
-
- reliefDistance() - Method in interface nxopen.die.DrawDiePunchSectionBuilder
-
Returns the relief distance of the draw die punch casting.
- reliefDistance() - Method in interface nxopen.tooling.DieDesDrawPunchBuilder
-
Returns the relief distance thickness, which is used for define the relief distance of the punch.
- reliefEnabled() - Method in interface nxopen.geometricutilities.StartHoleData
-
Returns the relief enabled
License requirements: None.
- reliefFace() - Method in interface nxopen.tooling.ReliefDesignBuilder
-
Returns the face used to create bounding box or wave to workpart as reference for creating user defined relief.
- reliefHeight() - Method in interface nxopen.tooling.ReliefDesignBuilder
-
Returns the relief height.
- reliefLength() - Method in interface nxopen.cam.DrillBoringBarTool
-
Returns the Relief Length
License requirements: None.
- reliefOffset() - Method in interface nxopen.die.MachineReliefBuilder
-
Returns the expression containing the value of the relief around the primary head solid for the cam definition if a wall is created.
- ReliefPlunge - Interface in nxopen.cam
-
- reliefPlunge() - Method in interface nxopen.cam.TurnCutParameters
-
Returns the Relief Plunge
License requirements: None.
- ReliefPlunge.Types - Class in nxopen.cam
-
the relief plunge options .
- ReliefPlunge.UnitTypes - Class in nxopen.cam
-
the relief plunge options .
- reliefPlungeDistance() - Method in interface nxopen.cam.TurnGrooveCornerControl
-
Returns the Groove Corner Control relief plunge distance
License requirements: None.
- reliefPlungeOffset() - Method in interface nxopen.cam.TurnGrooveCornerControl
-
Returns the Groove Corner Control relief plunge offset
License requirements: None.
- reliefPlungeType() - Method in interface nxopen.cam.TurnGrooveCornerControl
-
Returns the Groove Corner Control relief plunge type
License requirements: None.
- reliefProfile() - Method in interface nxopen.die.CastReliefBuilder
-
Returns the closed profiles used for determining the relief
License requirements: None.
- reliefRadius() - Method in interface nxopen.tooling.ReliefDesignBuilder
-
Returns the relief radius.
- reliefSheet() - Method in interface nxopen.die.CastReliefBuilder
-
Returns the sheet to offset to specify the relief surface
License requirements: None.
- reliefSheet() - Method in interface nxopen.die.CastReliefParentBuilder
-
Returns the relief sheet of cast relief.
- reliefStart() - Method in interface nxopen.tooling.ReliefDesignBuilder
-
Returns the extrude start of the user defined relief.
- reliefWidth() - Method in interface nxopen.cam.DrillBoringBarTool
-
Returns the Relief Width
License requirements: None.
- reliefWidth() - Method in interface nxopen.die.HeelpostBuilder
-
Returns the relief width
License requirements: None.
- reliefWidth() - Method in interface nxopen.die.PadChildBuilder
-
Returns the relief width of the die pad.
- reliefWidth() - Method in interface nxopen.die.PadParentBuilder
-
Returns the relief width of die pads.
- relinkAllGlobalLayups() - Method in interface nxopen.cae.LaminateGlobalLayupMgr
-
Relink all global layups groups
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- relinkCategory() - Method in interface nxopen.assemblies.RelinkerBuilder
-
Returns the relink category either wave geometry or interpart expression.
- RelinkerBuilder - Interface in nxopen.assemblies
-
- RelinkerBuilder.LinkCategory - Class in nxopen.assemblies
-
Represents the link category of Relinker, either geometry WAVE link or interpart expression.
- RelinkerBuilder.LinkOption - Class in nxopen.assemblies
-
Represents the relink option.
- RelinkerBuilder.LinkScope - Class in nxopen.assemblies
-
Represents the relink scope type of Relinker.
- RelinkerBuilder.LinkType - Class in nxopen.assemblies
-
Represents the link type option when browsing current available links.
- RelinkerCollection - Interface in nxopen.assemblies
-
Represents a collection of relinker
To obtain an instance of this class, refer to
Part
Created in NX5.0.0
- relinkers() - Method in interface nxopen.Part
-
Returns the RelinkerCollection instance belonging to this part .
- relinkInterpartExpression(Part, Expression, Expression) - Method in interface nxopen.assemblies.RelinkerBuilder
-
Relinks the inter part expression using the specific expression from the specific part in case of multiple expression sources.
- relinkOption() - Method in interface nxopen.assemblies.RelinkerBuilder
-
Returns the link option.
- relinkType() - Method in interface nxopen.assemblies.RelinkerBuilder
-
Returns the current link type.
- relinkWaveFeature(Part, Feature, NXObject) - Method in interface nxopen.assemblies.RelinkerBuilder
-
Relinks the wave feature using the specific geometry source from the specific part in case of multiple geometry sources.
- reload() - Method in interface nxopen.routing.ReuseLibrary
-
Reloads all of the nodes of the Routing Reuse Library based on the current discipline.
- reload(boolean) - Method in interface nxopen.RuleManager
-
Reload all classes and functions.
- reloadAllTemplateFiles() - Method in interface nxopen.cae.xyplot.BaseTemplateManager
-
Reload all graph template files so that the modification on the
loaded graph template files are reset.
- reloadClassesAndFunctions(String[], String[]) - Method in interface nxopen.RuleManager
-
Reload specified classes and functions.
- reloadedPart - Variable in class nxopen.BasePart.ReopenData
-
The reloaded part
- reloadIssues() - Method in interface nxopen.issue.IssueList
-
Reloads the
IssueContent
s
License requirements: nx_issue_mgmt ("NX Issue Tracking")
Created in NX8.5.0
- reloadList() - Method in interface nxopen.cam.fbm.FeatureGeometry
-
Reload list from parent
License requirements: cam_base ("CAM BASE")
.
- reloadListFromOperations() - Method in interface nxopen.cam.OptimizeFeatureGeometry
-
Reload list from operations
License requirements: cam_base ("CAM BASE")
.
- reloadMapFile(String) - Method in interface nxopen.uf.UFHelp
-
- reloadParameterSpreadSheet() - Method in interface nxopen.features.shipdesign.QualifySketchBuilder
-
Reloads parameter spreadsheet.
- reloadProject(NXObject) - Method in interface nxopen.ame.AMEManager
-
Reload of project
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- reloadProperties() - Method in interface nxopen.issue.IssueContent
-
Reloads all the
IssueProperty
s
License requirements: nx_issue_mgmt ("NX Issue Tracking")
Created in NX8.5.0
- reloadRegisterSpreadSheet() - Method in interface nxopen.features.shipdesign.QualifySketchBuilder
-
Reloads registration spreadsheet.
- reloadRequests(PenetrationList) - Method in interface nxopen.features.shipdesign.PenetrationUtils
-
Set current
PenetrationList
License requirements: nx_penetration_mgmt ("Penetration Management")
Created in NX8.0.0
- reloadSingleClass(String) - Method in interface nxopen.RuleManager
-
Reload a single class.
- reloadSpecification(String) - Method in interface nxopen.routing.ReuseLibrary
-
Reload a Specification into the reuse library.
- reloadSpecifications(boolean) - Method in interface nxopen.routing.ReuseLibrary
-
Reload Specifications into the reuse library.
- reloadSuperElementFile() - Method in interface nxopen.cae.ModifiableFEModelOccAttribute
-
Reload super element file and update connection node data
License requirements: nx_masterfem ("Finite Element Modeling")
.
- reloadTable() - Method in interface nxopen.features.shipdesign.QualifySketchBuilder
-
Reloads expression table.
- reloadTemplates() - Method in interface nxopen.cae.Post
-
Search and load template xml files
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- RELOCATE_PARAMETERS - Static variable in class nxopen.uf.UFCamPref.CamPref
-
- relocateParameters() - Method in interface nxopen.cam.Preferences
-
Returns the relocate parameters
License requirements: None.
- remaining - Variable in class nxopen.uf.UFRoute.MergeRcpsData
-
- remainingpartfilespecs - Variable in class nxopen.drafting.AutomationManager.RemainingPartsOfBookletData
-
- remainingparts - Variable in class nxopen.drafting.AutomationManager.RemainingPartsOfBookletData
-
- RemainingPartsOfBookletData() - Constructor for class nxopen.drafting.AutomationManager.RemainingPartsOfBookletData
-
- remapPhysicsReferences(Component) - Method in interface nxopen.mechatronics.PhysicsManager
-
Remap the physics references in context
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- rememberComponentState() - Method in interface nxopen.positioning.ComponentConstraintGroupBuilder
-
Returns the toggle to remember selected component
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- rememberOnComponent(Component) - Method in interface nxopen.positioning.ComponentConstraint
-
Remembers the constraint in the prototype part of a referenced component
for reuse in other occurrences of the part.
- remeshToggle - Variable in class nxopen.uf.UFSf.UgsTetMeshParms
-
- REMOTE - Static variable in class nxopen.mechatronics.OPCClientBuilder.ServerOption
-
remote server
- remoteip - Variable in class nxopen.mechatronics.TCPClientBuilder.ConnectionInformationData
-
- remoteip - Variable in class nxopen.mechatronics.TCPSignalServerBuilder.ConnectionInformationData
-
- remoteip - Variable in class nxopen.mechatronics.UDPSignalClientBuilder.ConnectionInformationData
-
- remoteip - Variable in class nxopen.mechatronics.UDPSignalServerBuilder.ConnectionInformationData
-
- remoteport - Variable in class nxopen.mechatronics.TCPClientBuilder.ConnectionInformationData
-
- remoteport - Variable in class nxopen.mechatronics.TCPSignalServerBuilder.ConnectionInformationData
-
- remoteport - Variable in class nxopen.mechatronics.UDPSignalClientBuilder.ConnectionInformationData
-
- remoteport - Variable in class nxopen.mechatronics.UDPSignalServerBuilder.ConnectionInformationData
-
- remoteRenderFormat() - Method in interface nxopen.display.IRayPlusStudioEditorBuilder
-
Returns the Ray Traced Studio display remote rendering format
License requirements: studio_render ("UG STUDIO RENDER")
.
- remoteRenderIP() - Method in interface nxopen.display.IRayPlusStudioEditorBuilder
-
Returns the Ray Traced Studio display remote rendering IP address
License requirements: studio_render ("UG STUDIO RENDER")
.
- remoteRenderSecurityToken() - Method in interface nxopen.display.IRayPlusStudioEditorBuilder
-
Returns the Ray Traced Studio display remote rendering security token
License requirements: studio_render ("UG STUDIO RENDER")
.
- remoteRenderToggle() - Method in interface nxopen.display.IRayPlusStudioEditorBuilder
-
Returns the Ray Traced Studio display if remote rendering is used
License requirements: studio_render ("UG STUDIO RENDER")
.
- remoteRenderType() - Method in interface nxopen.display.IRayPlusStudioEditorBuilder
-
Returns the Ray Traced Studio display remote rendering type
License requirements: studio_render ("UG STUDIO RENDER")
.
- remoteRenderVideoMode() - Method in interface nxopen.display.IRayPlusStudioEditorBuilder
-
- RemoteUtilities - Interface in nxopen
-
This class is primarily designed for use in a remote session, and allows client
applications to access resources on a remote server.
- remotingProtocol() - Method in class nxopen.NXRemotableObject
-
Returns the remoting protocol for this object
- remove(String, String) - Method in interface nxopen.ame.ConfigureResultTableBuilder
-
The action to move earlier added column
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- remove(AMEBaseNode) - Method in interface nxopen.ame.SelectAMEBaseNodeList
-
Remove specified object from list.
- remove(AMEBaseNode, View) - Method in interface nxopen.ame.SelectAMEBaseNodeList
-
Remove specified object from list.
- remove(InferSnapType.SnapType, AMEBaseNode, View, Point3d, AMEBaseNode, View, Point3d) - Method in interface nxopen.ame.SelectAMEBaseNodeList
-
Remove specified object from list.
- remove(SelectionMethod) - Method in interface nxopen.ame.SelectAMEBaseNodeList
-
Removes the objects from a SelectionMethod from the list
License requirements: None.
- REMOVE - Static variable in class nxopen.annotations.HoleTableSettingsFormatBuilder.DeletedHolesDisplayType
-
Remove
- remove(Annotation) - Method in interface nxopen.annotations.SelectAnnotationList
-
Remove specified object from list.
- remove(Annotation, View) - Method in interface nxopen.annotations.SelectAnnotationList
-
Remove specified object from list.
- remove(InferSnapType.SnapType, Annotation, View, Point3d, Annotation, View, Point3d) - Method in interface nxopen.annotations.SelectAnnotationList
-
Remove specified object from list.
- remove(SelectionMethod) - Method in interface nxopen.annotations.SelectAnnotationList
-
Removes the objects from a SelectionMethod from the list
License requirements: None.
- remove(BaseCustomSymbol) - Method in interface nxopen.annotations.SelectBaseCustomSymbolList
-
Remove specified object from list.
- remove(BaseCustomSymbol, View) - Method in interface nxopen.annotations.SelectBaseCustomSymbolList
-
Remove specified object from list.
- remove(InferSnapType.SnapType, BaseCustomSymbol, View, Point3d, BaseCustomSymbol, View, Point3d) - Method in interface nxopen.annotations.SelectBaseCustomSymbolList
-
Remove specified object from list.
- remove(SelectionMethod) - Method in interface nxopen.annotations.SelectBaseCustomSymbolList
-
Removes the objects from a SelectionMethod from the list
License requirements: None.
- remove(OrdinateDimension) - Method in interface nxopen.annotations.SelectOrdinateDimensionList
-
Remove specified object from list.
- remove(OrdinateDimension, View) - Method in interface nxopen.annotations.SelectOrdinateDimensionList
-
Remove specified object from list.
- remove(InferSnapType.SnapType, OrdinateDimension, View, Point3d, OrdinateDimension, View, Point3d) - Method in interface nxopen.annotations.SelectOrdinateDimensionList
-
Remove specified object from list.
- remove(SelectionMethod) - Method in interface nxopen.annotations.SelectOrdinateDimensionList
-
Removes the objects from a SelectionMethod from the list
License requirements: None.
- remove(TableSection) - Method in interface nxopen.annotations.SelectTableSectionList
-
Remove specified object from list.
- remove(TableSection, View) - Method in interface nxopen.annotations.SelectTableSectionList
-
Remove specified object from list.
- remove(InferSnapType.SnapType, TableSection, View, Point3d, TableSection, View, Point3d) - Method in interface nxopen.annotations.SelectTableSectionList
-
Remove specified object from list.
- remove(SelectionMethod) - Method in interface nxopen.annotations.SelectTableSectionList
-
Removes the objects from a SelectionMethod from the list
License requirements: None.
- REMOVE - Static variable in class nxopen.annotations.TabularNoteStyleBuilder.ShowLockedDeletedRowMethod
-
Remove
- remove(Component) - Method in interface nxopen.assemblies.SelectComponentList
-
Remove specified object from list.
- remove(Component, View) - Method in interface nxopen.assemblies.SelectComponentList
-
Remove specified object from list.
- remove(InferSnapType.SnapType, Component, View, Point3d, Component, View, Point3d) - Method in interface nxopen.assemblies.SelectComponentList
-
Remove specified object from list.
- remove(SelectionMethod) - Method in interface nxopen.assemblies.SelectComponentList
-
Removes the objects from a SelectionMethod from the list
License requirements: None.
- REMOVE - Static variable in class nxopen.cae.AssyFEModel.MappedComponentRemovalType
-
remove
- remove(TaggedObject) - Method in interface nxopen.cae.OrderedSelection
-
Removes a tagged object from the list
License requirements: None.
- remove(SelectionMethod) - Method in interface nxopen.cae.OrderedSelection
-
Removes objects contained in the method from the list
License requirements: None.
- remove(CAEBody) - Method in interface nxopen.cae.SelectCAEBodyList
-
Remove specified object from list.
- remove(CAEBody, View) - Method in interface nxopen.cae.SelectCAEBodyList
-
Remove specified object from list.
- remove(InferSnapType.SnapType, CAEBody, View, Point3d, CAEBody, View, Point3d) - Method in interface nxopen.cae.SelectCAEBodyList
-
Remove specified object from list.
- remove(SelectionMethod) - Method in interface nxopen.cae.SelectCAEBodyList
-
Removes the objects from a SelectionMethod from the list
License requirements: None.
- remove(CAEEdge) - Method in interface nxopen.cae.SelectCAEEdgeList
-
Remove specified object from list.
- remove(CAEEdge, View) - Method in interface nxopen.cae.SelectCAEEdgeList
-
Remove specified object from list.
- remove(InferSnapType.SnapType, CAEEdge, View, Point3d, CAEEdge, View, Point3d) - Method in interface nxopen.cae.SelectCAEEdgeList
-
Remove specified object from list.
- remove(SelectionMethod) - Method in interface nxopen.cae.SelectCAEEdgeList
-
Removes the objects from a SelectionMethod from the list
License requirements: None.
- remove(CAEFace) - Method in interface nxopen.cae.SelectCAEFaceList
-
Remove specified object from list.
- remove(CAEFace, View) - Method in interface nxopen.cae.SelectCAEFaceList
-
Remove specified object from list.
- remove(InferSnapType.SnapType, CAEFace, View, Point3d, CAEFace, View, Point3d) - Method in interface nxopen.cae.SelectCAEFaceList
-
Remove specified object from list.
- remove(SelectionMethod) - Method in interface nxopen.cae.SelectCAEFaceList
-
Removes the objects from a SelectionMethod from the list
License requirements: None.
- remove(FEElemFace) - Method in interface nxopen.cae.SelectFEElemFaceList
-
Remove specified object from list.
- remove(FEElemFace, View) - Method in interface nxopen.cae.SelectFEElemFaceList
-
Remove specified object from list.
- remove(InferSnapType.SnapType, FEElemFace, View, Point3d, FEElemFace, View, Point3d) - Method in interface nxopen.cae.SelectFEElemFaceList
-
Remove specified object from list.
- remove(SelectionMethod) - Method in interface nxopen.cae.SelectFEElemFaceList
-
Removes the objects from a SelectionMethod from the list
License requirements: None.
- remove(FENode) - Method in interface nxopen.cae.SelectFENodeList
-
Remove specified object from list.
- remove(FENode, View) - Method in interface nxopen.cae.SelectFENodeList
-
Remove specified object from list.
- remove(InferSnapType.SnapType, FENode, View, Point3d, FENode, View, Point3d) - Method in interface nxopen.cae.SelectFENodeList
-
Remove specified object from list.
- remove(SelectionMethod) - Method in interface nxopen.cae.SelectFENodeList
-
Removes the objects from a SelectionMethod from the list
License requirements: None.
- remove(Mesh) - Method in interface nxopen.cae.SelectMeshList
-
Remove specified object from list.
- remove(Mesh, View) - Method in interface nxopen.cae.SelectMeshList
-
Remove specified object from list.
- remove(InferSnapType.SnapType, Mesh, View, Point3d, Mesh, View, Point3d) - Method in interface nxopen.cae.SelectMeshList
-
Remove specified object from list.
- remove(SelectionMethod) - Method in interface nxopen.cae.SelectMeshList
-
Removes the objects from a SelectionMethod from the list
License requirements: None.
- remove(SimConstraint) - Method in interface nxopen.cae.SimConstraintGroup
-
Removes a constraint from this group
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- remove(SimLoad) - Method in interface nxopen.cae.SimLoadGroup
-
Removes a load from this group
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- remove(SimSimulationObject) - Method in interface nxopen.cae.SimSimulationObjectGroup
-
Removes a simulation object from this group
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- remove(CAMFeature) - Method in interface nxopen.cam.SelectCAMFeatureList
-
Remove specified object from list.
- remove(CAMFeature, View) - Method in interface nxopen.cam.SelectCAMFeatureList
-
Remove specified object from list.
- remove(InferSnapType.SnapType, CAMFeature, View, Point3d, CAMFeature, View, Point3d) - Method in interface nxopen.cam.SelectCAMFeatureList
-
Remove specified object from list.
- remove(SelectionMethod) - Method in interface nxopen.cam.SelectCAMFeatureList
-
Removes the objects from a SelectionMethod from the list
License requirements: None.
- REMOVE - Static variable in class nxopen.drawings.AddRemoveBoxViewBuilder.ModeType
-
Remove mode
- remove(DraftingView) - Method in interface nxopen.drawings.SelectDraftingViewList
-
Remove specified object from list.
- remove(DraftingView, View) - Method in interface nxopen.drawings.SelectDraftingViewList
-
Remove specified object from list.
- remove(InferSnapType.SnapType, DraftingView, View, Point3d, DraftingView, View, Point3d) - Method in interface nxopen.drawings.SelectDraftingViewList
-
Remove specified object from list.
- remove(SelectionMethod) - Method in interface nxopen.drawings.SelectDraftingViewList
-
Removes the objects from a SelectionMethod from the list
License requirements: None.
- remove(DrawingView) - Method in interface nxopen.drawings.SelectDrawingViewList
-
Remove specified object from list.
- remove(DrawingView, View) - Method in interface nxopen.drawings.SelectDrawingViewList
-
Remove specified object from list.
- remove(InferSnapType.SnapType, DrawingView, View, Point3d, DrawingView, View, Point3d) - Method in interface nxopen.drawings.SelectDrawingViewList
-
Remove specified object from list.
- remove(SelectionMethod) - Method in interface nxopen.drawings.SelectDrawingViewList
-
Removes the objects from a SelectionMethod from the list
License requirements: None.
- remove(FacetedBody) - Method in interface nxopen.facet.SelectFacetedBodyList
-
Remove specified object from list.
- remove(FacetedBody, View) - Method in interface nxopen.facet.SelectFacetedBodyList
-
Remove specified object from list.
- remove(InferSnapType.SnapType, FacetedBody, View, Point3d, FacetedBody, View, Point3d) - Method in interface nxopen.facet.SelectFacetedBodyList
-
Remove specified object from list.
- remove(SelectionMethod) - Method in interface nxopen.facet.SelectFacetedBodyList
-
Removes the objects from a SelectionMethod from the list
License requirements: None.
- remove(BodyFeature) - Method in interface nxopen.features.SelectBodyFeatureList
-
Remove specified object from list.
- remove(BodyFeature, View) - Method in interface nxopen.features.SelectBodyFeatureList
-
Remove specified object from list.
- remove(InferSnapType.SnapType, BodyFeature, View, Point3d, BodyFeature, View, Point3d) - Method in interface nxopen.features.SelectBodyFeatureList
-
Remove specified object from list.
- remove(SelectionMethod) - Method in interface nxopen.features.SelectBodyFeatureList
-
Removes the objects from a SelectionMethod from the list
License requirements: None.
- remove(DatumCsys) - Method in interface nxopen.features.SelectDatumCsysList
-
Remove specified object from list.
- remove(DatumCsys, View) - Method in interface nxopen.features.SelectDatumCsysList
-
Remove specified object from list.
- remove(InferSnapType.SnapType, DatumCsys, View, Point3d, DatumCsys, View, Point3d) - Method in interface nxopen.features.SelectDatumCsysList
-
Remove specified object from list.
- remove(SelectionMethod) - Method in interface nxopen.features.SelectDatumCsysList
-
Removes the objects from a SelectionMethod from the list
License requirements: None.
- remove(Feature) - Method in interface nxopen.features.SelectFeatureList
-
Remove specified object from list.
- remove(Feature, View) - Method in interface nxopen.features.SelectFeatureList
-
Remove specified object from list.
- remove(InferSnapType.SnapType, Feature, View, Point3d, Feature, View, Point3d) - Method in interface nxopen.features.SelectFeatureList
-
Remove specified object from list.
- remove(SelectionMethod) - Method in interface nxopen.features.SelectFeatureList
-
Removes the objects from a SelectionMethod from the list
License requirements: None.
- remove(Component) - Method in interface nxopen.features.shipdesign.DeckListBuilder
-
Removes a deck from creation list
License requirements: nx_ship_drafting ("Ship Drafting")
.
- remove(SubdivisionBody) - Method in interface nxopen.features.subdivision.SelectSubdivisionBodyList
-
Remove specified object from list.
- remove(SubdivisionBody, View) - Method in interface nxopen.features.subdivision.SelectSubdivisionBodyList
-
Remove specified object from list.
- remove(InferSnapType.SnapType, SubdivisionBody, View, Point3d, SubdivisionBody, View, Point3d) - Method in interface nxopen.features.subdivision.SelectSubdivisionBodyList
-
Remove specified object from list.
- remove(SelectionMethod) - Method in interface nxopen.features.subdivision.SelectSubdivisionBodyList
-
Removes the objects from a SelectionMethod from the list
License requirements: None.
- REMOVE - Static variable in class nxopen.geometricutilities.BooleanRegionSelect.KeepRemoveOption
-
Selected reg
ion will be removed.
- remove(Component) - Method in interface nxopen.layout2d.SelectComponentList
-
Remove specified object from list.
- remove(Component, View) - Method in interface nxopen.layout2d.SelectComponentList
-
Remove specified object from list.
- remove(InferSnapType.SnapType, Component, View, Point3d, Component, View, Point3d) - Method in interface nxopen.layout2d.SelectComponentList
-
Remove specified object from list.
- remove(SelectionMethod) - Method in interface nxopen.layout2d.SelectComponentList
-
Removes the objects from a SelectionMethod from the list
License requirements: None.
- remove(CollisionSensor) - Method in interface nxopen.mechatronics.SelectCollisionSensorList
-
Remove specified object from list.
- remove(CollisionSensor, View) - Method in interface nxopen.mechatronics.SelectCollisionSensorList
-
Remove specified object from list.
- remove(InferSnapType.SnapType, CollisionSensor, View, Point3d, CollisionSensor, View, Point3d) - Method in interface nxopen.mechatronics.SelectCollisionSensorList
-
Remove specified object from list.
- remove(SelectionMethod) - Method in interface nxopen.mechatronics.SelectCollisionSensorList
-
Removes the objects from a SelectionMethod from the list
License requirements: None.
- remove(HydraulicCylinder) - Method in interface nxopen.mechatronics.SelectHydraulicCylinderList
-
Remove specified object from list.
- remove(HydraulicCylinder, View) - Method in interface nxopen.mechatronics.SelectHydraulicCylinderList
-
Remove specified object from list.
- remove(InferSnapType.SnapType, HydraulicCylinder, View, Point3d, HydraulicCylinder, View, Point3d) - Method in interface nxopen.mechatronics.SelectHydraulicCylinderList
-
Remove specified object from list.
- remove(SelectionMethod) - Method in interface nxopen.mechatronics.SelectHydraulicCylinderList
-
Removes the objects from a SelectionMethod from the list
License requirements: None.
- remove(LogicObject) - Method in interface nxopen.mechatronics.SelectLogicObjectList
-
Remove specified object from list.
- remove(LogicObject, View) - Method in interface nxopen.mechatronics.SelectLogicObjectList
-
Remove specified object from list.
- remove(InferSnapType.SnapType, LogicObject, View, Point3d, LogicObject, View, Point3d) - Method in interface nxopen.mechatronics.SelectLogicObjectList
-
Remove specified object from list.
- remove(SelectionMethod) - Method in interface nxopen.mechatronics.SelectLogicObjectList
-
Removes the objects from a SelectionMethod from the list
License requirements: None.
- remove(PneumaticCylinder) - Method in interface nxopen.mechatronics.SelectPneumaticCylinderList
-
Remove specified object from list.
- remove(PneumaticCylinder, View) - Method in interface nxopen.mechatronics.SelectPneumaticCylinderList
-
Remove specified object from list.
- remove(InferSnapType.SnapType, PneumaticCylinder, View, Point3d, PneumaticCylinder, View, Point3d) - Method in interface nxopen.mechatronics.SelectPneumaticCylinderList
-
Remove specified object from list.
- remove(SelectionMethod) - Method in interface nxopen.mechatronics.SelectPneumaticCylinderList
-
Removes the objects from a SelectionMethod from the list
License requirements: None.
- remove() - Method in interface nxopen.routing.DiscontinuityCorner
-
Removes (deletes) the input discontinuity corner.
- remove() - Method in interface nxopen.routing.RouteLogicalAssociation
-
Removes the RouteLogicalAssociation object
License requirements: routing_harness ("Routing Harness")
.
- remove(Body) - Method in interface nxopen.SelectBodyList
-
Remove specified object from list.
- remove(Body, View) - Method in interface nxopen.SelectBodyList
-
Remove specified object from list.
- remove(InferSnapType.SnapType, Body, View, Point3d, Body, View, Point3d) - Method in interface nxopen.SelectBodyList
-
Remove specified object from list.
- remove(SelectionMethod) - Method in interface nxopen.SelectBodyList
-
Removes the objects from a SelectionMethod from the list
License requirements: None.
- remove(CoordinateSystem) - Method in interface nxopen.SelectCoordinateSystemList
-
Remove specified object from list.
- remove(CoordinateSystem, View) - Method in interface nxopen.SelectCoordinateSystemList
-
Remove specified object from list.
- remove(InferSnapType.SnapType, CoordinateSystem, View, Point3d, CoordinateSystem, View, Point3d) - Method in interface nxopen.SelectCoordinateSystemList
-
Remove specified object from list.
- remove(SelectionMethod) - Method in interface nxopen.SelectCoordinateSystemList
-
Removes the objects from a SelectionMethod from the list
License requirements: None.
- remove(Curve) - Method in interface nxopen.SelectCurveList
-
Remove specified object from list.
- remove(Curve, View) - Method in interface nxopen.SelectCurveList
-
Remove specified object from list.
- remove(InferSnapType.SnapType, Curve, View, Point3d, Curve, View, Point3d) - Method in interface nxopen.SelectCurveList
-
Remove specified object from list.
- remove(SelectionMethod) - Method in interface nxopen.SelectCurveList
-
Removes the objects from a SelectionMethod from the list
License requirements: None.
- remove(DatumPlane) - Method in interface nxopen.SelectDatumPlaneList
-
Remove specified object from list.
- remove(DatumPlane, View) - Method in interface nxopen.SelectDatumPlaneList
-
Remove specified object from list.
- remove(InferSnapType.SnapType, DatumPlane, View, Point3d, DatumPlane, View, Point3d) - Method in interface nxopen.SelectDatumPlaneList
-
Remove specified object from list.
- remove(SelectionMethod) - Method in interface nxopen.SelectDatumPlaneList
-
Removes the objects from a SelectionMethod from the list
License requirements: None.
- remove(DisplayableObject) - Method in interface nxopen.SelectDisplayableObjectList
-
Remove specified object from list.
- remove(DisplayableObject, View) - Method in interface nxopen.SelectDisplayableObjectList
-
Remove specified object from list.
- remove(InferSnapType.SnapType, DisplayableObject, View, Point3d, DisplayableObject, View, Point3d) - Method in interface nxopen.SelectDisplayableObjectList
-
Remove specified object from list.
- remove(SelectionMethod) - Method in interface nxopen.SelectDisplayableObjectList
-
Removes the objects from a SelectionMethod from the list
License requirements: None.
- remove(Edge) - Method in interface nxopen.SelectEdgeList
-
Remove specified object from list.
- remove(Edge, View) - Method in interface nxopen.SelectEdgeList
-
Remove specified object from list.
- remove(InferSnapType.SnapType, Edge, View, Point3d, Edge, View, Point3d) - Method in interface nxopen.SelectEdgeList
-
Remove specified object from list.
- remove(SelectionMethod) - Method in interface nxopen.SelectEdgeList
-
Removes the objects from a SelectionMethod from the list
License requirements: None.
- remove(Expression) - Method in interface nxopen.SelectExpressionList
-
Remove specified object from list.
- remove(Expression, View) - Method in interface nxopen.SelectExpressionList
-
Remove specified object from list.
- remove(InferSnapType.SnapType, Expression, View, Point3d, Expression, View, Point3d) - Method in interface nxopen.SelectExpressionList
-
Remove specified object from list.
- remove(SelectionMethod) - Method in interface nxopen.SelectExpressionList
-
Removes the objects from a SelectionMethod from the list
License requirements: None.
- remove(Face) - Method in interface nxopen.SelectFaceList
-
Remove specified object from list.
- remove(Face, View) - Method in interface nxopen.SelectFaceList
-
Remove specified object from list.
- remove(InferSnapType.SnapType, Face, View, Point3d, Face, View, Point3d) - Method in interface nxopen.SelectFaceList
-
Remove specified object from list.
- remove(SelectionMethod) - Method in interface nxopen.SelectFaceList
-
Removes the objects from a SelectionMethod from the list
License requirements: None.
- remove(IBaseCurve) - Method in interface nxopen.SelectIBaseCurveList
-
Remove specified object from list.
- remove(IBaseCurve, View) - Method in interface nxopen.SelectIBaseCurveList
-
Remove specified object from list.
- remove(InferSnapType.SnapType, IBaseCurve, View, Point3d, IBaseCurve, View, Point3d) - Method in interface nxopen.SelectIBaseCurveList
-
Remove specified object from list.
- remove(SelectionMethod) - Method in interface nxopen.SelectIBaseCurveList
-
Removes the objects from a SelectionMethod from the list
License requirements: None.
- remove(IBasePlane) - Method in interface nxopen.SelectIBasePlaneList
-
Remove specified object from list.
- remove(IBasePlane, View) - Method in interface nxopen.SelectIBasePlaneList
-
Remove specified object from list.
- remove(InferSnapType.SnapType, IBasePlane, View, Point3d, IBasePlane, View, Point3d) - Method in interface nxopen.SelectIBasePlaneList
-
Remove specified object from list.
- remove(SelectionMethod) - Method in interface nxopen.SelectIBasePlaneList
-
Removes the objects from a SelectionMethod from the list
License requirements: None.
- remove(ICurve) - Method in interface nxopen.SelectICurveList
-
Remove specified object from list.
- remove(ICurve, View) - Method in interface nxopen.SelectICurveList
-
Remove specified object from list.
- remove(InferSnapType.SnapType, ICurve, View, Point3d, ICurve, View, Point3d) - Method in interface nxopen.SelectICurveList
-
Remove specified object from list.
- remove(SelectionMethod) - Method in interface nxopen.SelectICurveList
-
Removes the objects from a SelectionMethod from the list
License requirements: None.
- remove(INXObject) - Method in interface nxopen.SelectINXObjectList
-
Remove specified object from list.
- remove(INXObject, View) - Method in interface nxopen.SelectINXObjectList
-
Remove specified object from list.
- remove(InferSnapType.SnapType, INXObject, View, Point3d, INXObject, View, Point3d) - Method in interface nxopen.SelectINXObjectList
-
Remove specified object from list.
- remove(SelectionMethod) - Method in interface nxopen.SelectINXObjectList
-
Removes the objects from a SelectionMethod from the list
License requirements: None.
- remove(IParameterizedSurface) - Method in interface nxopen.SelectIParameterizedSurfaceList
-
Remove specified object from list.
- remove(IParameterizedSurface, View) - Method in interface nxopen.SelectIParameterizedSurfaceList
-
Remove specified object from list.
- remove(InferSnapType.SnapType, IParameterizedSurface, View, Point3d, IParameterizedSurface, View, Point3d) - Method in interface nxopen.SelectIParameterizedSurfaceList
-
Remove specified object from list.
- remove(SelectionMethod) - Method in interface nxopen.SelectIParameterizedSurfaceList
-
Removes the objects from a SelectionMethod from the list
License requirements: None.
- remove(ModelingView) - Method in interface nxopen.SelectModelingViewList
-
Remove specified object from list.
- remove(ModelingView, View) - Method in interface nxopen.SelectModelingViewList
-
Remove specified object from list.
- remove(InferSnapType.SnapType, ModelingView, View, Point3d, ModelingView, View, Point3d) - Method in interface nxopen.SelectModelingViewList
-
Remove specified object from list.
- remove(SelectionMethod) - Method in interface nxopen.SelectModelingViewList
-
Removes the objects from a SelectionMethod from the list
License requirements: None.
- remove(NXObject) - Method in interface nxopen.SelectNXObjectList
-
Remove specified object from list.
- remove(NXObject, View) - Method in interface nxopen.SelectNXObjectList
-
Remove specified object from list.
- remove(InferSnapType.SnapType, NXObject, View, Point3d, NXObject, View, Point3d) - Method in interface nxopen.SelectNXObjectList
-
Remove specified object from list.
- remove(SelectionMethod) - Method in interface nxopen.SelectNXObjectList
-
Removes the objects from a SelectionMethod from the list
License requirements: None.
- remove(TaggedObject) - Method in interface nxopen.SelectObjectList
-
Remove specified object from list.
- remove(TaggedObject, View) - Method in interface nxopen.SelectObjectList
-
Remove specified object from list.
- remove(InferSnapType.SnapType, TaggedObject, View, Point3d, TaggedObject, View, Point3d) - Method in interface nxopen.SelectObjectList
-
Remove specified object from list.
- remove(SelectionMethod) - Method in interface nxopen.SelectObjectList
-
Removes the objects from a SelectionMethod from the list
License requirements: None.
- remove(Part) - Method in interface nxopen.SelectPartList
-
Remove specified object from list.
- remove(Part, View) - Method in interface nxopen.SelectPartList
-
Remove specified object from list.
- remove(InferSnapType.SnapType, Part, View, Point3d, Part, View, Point3d) - Method in interface nxopen.SelectPartList
-
Remove specified object from list.
- remove(SelectionMethod) - Method in interface nxopen.SelectPartList
-
Removes the objects from a SelectionMethod from the list
License requirements: None.
- remove(Point) - Method in interface nxopen.SelectPointList
-
Remove specified object from list.
- remove(Point, View) - Method in interface nxopen.SelectPointList
-
Remove specified object from list.
- remove(InferSnapType.SnapType, Point, View, Point3d, Point, View, Point3d) - Method in interface nxopen.SelectPointList
-
Remove specified object from list.
- remove(SelectionMethod) - Method in interface nxopen.SelectPointList
-
Removes the objects from a SelectionMethod from the list
License requirements: None.
- remove(Spline) - Method in interface nxopen.SelectSplineList
-
Remove specified object from list.
- remove(Spline, View) - Method in interface nxopen.SelectSplineList
-
Remove specified object from list.
- remove(InferSnapType.SnapType, Spline, View, Point3d, Spline, View, Point3d) - Method in interface nxopen.SelectSplineList
-
Remove specified object from list.
- remove(SelectionMethod) - Method in interface nxopen.SelectSplineList
-
Removes the objects from a SelectionMethod from the list
License requirements: None.
- remove(TaggedObject) - Method in interface nxopen.SelectTaggedObjectList
-
Remove specified object from list.
- remove(TaggedObject, View) - Method in interface nxopen.SelectTaggedObjectList
-
Remove specified object from list.
- remove(InferSnapType.SnapType, TaggedObject, View, Point3d, TaggedObject, View, Point3d) - Method in interface nxopen.SelectTaggedObjectList
-
Remove specified object from list.
- remove(SelectionMethod) - Method in interface nxopen.SelectTaggedObjectList
-
Removes the objects from a SelectionMethod from the list
License requirements: None.
- remove(View) - Method in interface nxopen.SelectViewList
-
Remove specified object from list.
- remove(View, View) - Method in interface nxopen.SelectViewList
-
Remove specified object from list.
- remove(InferSnapType.SnapType, View, View, Point3d, View, View, Point3d) - Method in interface nxopen.SelectViewList
-
Remove specified object from list.
- remove(SelectionMethod) - Method in interface nxopen.SelectViewList
-
Removes the objects from a SelectionMethod from the list
License requirements: None.
- remove() - Method in class nxopen.TaggedObjectCollection.Iterator
-
Throws UnsupportedOperationException
- REMOVE - Static variable in class nxopen.tooling.BlankGeneratorBuilder.EditBlankType
-
Remove the blank
- REMOVE - Static variable in class nxopen.tooling.FastenerAssy.HoleOperation
-
Click the remove menu
- remove() - Method in interface nxopen.tooling.LayoutBuilder
-
Remove cavity
License requirements: None.
- remove(String) - Method in interface nxopen.Validation
-
Remove a key from the map
License requirements: None.
- remove3dModel(String) - Method in interface nxopen.ame.Manage3DModelsBuilder
-
Removes the given 3D Model from the associated
ProductDefinition
License requirements: None.
- remove911Attribute(CAMObject.Attr) - Method in interface nxopen.cam.CAMObject
-
Remove a specific 911 attribute from an object.
- REMOVE_ALL_CHANGES - Static variable in class nxopen.PartCleanup.ResetComponentDisplayAction
-
remove all changes
- REMOVE_BLANK - Static variable in class nxopen.tooling.BlankLayoutBuilder.Types
-
the type of remove blank
- REMOVE_FACETS - Static variable in class nxopen.facet.SnipFacetBodyBuilder.BoundaryFacetTreatmentMethod
-
Remove scarred facets
- REMOVE_FROM_GROUP - Static variable in class nxopen.GroupBuilder.Action
-
Remove members of existing group in Modeling
- REMOVE_FROM_LIST - Static variable in class nxopen.tooling.PiercingInsertBuilder.AssociationToolType
-
The operation option is remove from list
- REMOVE_LAST_ASPECT - Static variable in class nxopen.ame.AMEManager.DeleteType
-
- REMOVE_NOTE - Static variable in class nxopen.routing.CustomManager.DuctSizeCalculatorDisplayNoteFlag
-
- REMOVE_PARAMS - Static variable in class nxopen.uf.UFPart.ExportParamsMode
-
- REMOVE_PART - Static variable in class nxopen.routing.CustomManager.CallbackReason
-
Called after the Remove Part command.
- REMOVE_PART - Static variable in class nxopen.routing.CustomManager.DesignRuleReason
-
Called after the Remove Part command.
- REMOVE_PART - Static variable in class nxopen.routing.DesignRuleViolationCollection.Reason
-
- REMOVE_REDUNDANT_CHANGES - Static variable in class nxopen.PartCleanup.ResetComponentDisplayAction
-
only remove changes that will not affect current display.
- REMOVE_SELECTED - Static variable in class nxopen.cae.modelcheck.DuplicateElementsCheckBuilder.DeletePreference
-
- REMOVE_SELECTED - Static variable in class nxopen.cae.modelcheck.DuplicateNodesCheckBuilder.MergePreference
-
- REMOVE_SPACES - Static variable in class nxopen.annotations.TableCellStyleBuilder.FitMethodType
-
- REMOVE_STOCK - Static variable in class nxopen.routing.CustomManager.DesignRuleReason
-
Called after the Remove Stockcommand.
- REMOVE_STOCK - Static variable in class nxopen.routing.DesignRuleViolationCollection.Reason
-
- REMOVE_TRANSIENCE - Static variable in class nxopen.Session.TransientPartPolicy
-
Remove transient status when non-retainable mods made
- REMOVE_VIEW_SPECIFIC - Static variable in class nxopen.drawings.SectionInViewBuilder.EditSxtype
-
- removeAccessibilityVectors(Tag, UFVariant) - Method in interface nxopen.uf.UFFbmGeom
-
- removeAccessKey(AttributeTemplatesBuilder.AccessKey) - Method in interface nxopen.AttributeTemplatesBuilder
-
Remove an access key from the list of access keys.
- removeAcrossObject(DisplayableObject) - Method in interface nxopen.features.shipdesign.StandardPartItemBuilder
-
Removes the specific object from the across object list.
- removeAddedComponents() - Method in interface nxopen.assemblies.AddComponentBuilder
-
Removes the components added through add component
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- removeAddedComponents() - Method in interface nxopen.tooling.MoldFillingBuilder
-
Removes added fill components.
- removeAll() - Method in interface nxopen.cae.SimConstraintGroup
-
Removes all constraints from this group
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- removeAll() - Method in interface nxopen.cae.SimLoadGroup
-
Removes all loads from this group
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- removeAll() - Method in interface nxopen.cae.SimSimulationObjectGroup
-
Removes all simulation objects from this group
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- removeAll() - Method in interface nxopen.geometricutilities.ConvertFeatureGroupsToModulesBuilder
-
Remove all feature groups from convertible set
License requirements: None.
- removeAll(Line[]) - Method in interface nxopen.tooling.SectionLineCreationBuilder
-
Remove all cut segments
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- removeAll911Attributes() - Method in interface nxopen.cam.CAMObject
-
Remove all 911 attributes from an object.
- removeAllAdjacentStructures() - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder
-
Removes all adjacent structures
License requirements: nx_penetration_mgmt ("Penetration Management")
.
- removeAllAttributes(NXObject[]) - Method in interface nxopen.weld.CharacteristicsBuilder
-
Remove all attributes from the objects.
- removeAllCallbacks() - Method in interface nxopen.routing.CustomManager
-
Removes all the registered callbacks, except those configured in the Application View (APV) file.
- removeAllCallbacksForReason(CustomManager.CallbackReason) - Method in interface nxopen.routing.CustomManager
-
Removes all the callbacks registered for a particular reason.
- removeAllClocking() - Method in interface nxopen.features.PatternFeatureBuilder
-
Removes clocking from (unclocks) all instances of the
PatternFeature
.
- removeAllConstraints() - Method in interface nxopen.cae.SimSolution
-
Remove all constraints from the solution
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- removeAllConstraints() - Method in interface nxopen.cae.SimSolutionStep
-
Remove all constraints from the step
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- removeAllConstraints() - Method in interface nxopen.optimization.OptimizationBuilder
-
Remove all the constraints
License requirements: None.
- removeAllConstraints() - Method in interface nxopen.positioning.Network
-
Remove all
Constraint
s which have been explcitly added
to the network.
- removeAllConstraintSets() - Method in interface nxopen.cae.SimConstraintGroup
-
Remove all constraint sets from this group
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- removeAllDesignRules() - Method in interface nxopen.routing.CustomManager
-
Removes all the registered design rules, except those configured in the Application View (APV) file.
- removeAllDesignRulesForReason(CustomManager.DesignRuleReason) - Method in interface nxopen.routing.CustomManager
-
Removes all the design rules registered for a particular reason.
- removeAllDivideEvents() - Method in interface nxopen.cam.ToolPathDivideBuilder
-
Delete all events where to of divide the tool path
License requirements: None.
- removeAllEdits() - Method in interface nxopen.ViewDependentDisplayManager
-
Removes all edits and erasures from all objects in a view.
- removeAllElements() - Method in interface nxopen.mechatronics.ExternalConnectionBuilder
-
- removeAllFacets() - Method in interface nxopen.FacetCollector
-
Remove all collected facets from collection
License requirements: gateway ("UG GATEWAY")
.
- removeAllFillerStocks(ISegment[]) - Method in interface nxopen.routing.StockCollection
-
Removes all filler stocks from the input set of segments.
- removeAllFromSelectionList(SelectionHandle, boolean) - Method in interface nxopen.Selection
-
Removes all the objects from the selection list and optionally unhighlights them.
- removeAllFromSelList(UFVariant, boolean) - Method in interface nxopen.uf.UFUi
-
- removeAllGroupMembers() - Method in interface nxopen.diagramming.NodeBuilder
-
Remove all members.
- removeAllLoads() - Method in interface nxopen.cae.SimSolution
-
Remove all loads from the solution
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- removeAllLoads() - Method in interface nxopen.cae.SimSolutionStep
-
Remove all loads from the step
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- removeAllLoadSets() - Method in interface nxopen.cae.SimLoadGroup
-
Remove all load sets from this group
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- removeAllMarkers() - Method in interface nxopen.motion.SplineBeamBuilder
-
Removes all markers
License requirements: mechanisms ("MECHANISMS")
.
- removeAllMembers() - Method in interface nxopen.diagramming.GroupBuilder
-
Remove all members.
- removeAllMembers() - Method in interface nxopen.features.FeatureGroup
-
Removes all features from the feature group.
- removeAllNodes() - Method in interface nxopen.cae.CaeDOFSet
-
Remove all nodes from the CaeDOFSet
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- removeAllObjectives() - Method in interface nxopen.optimization.DesignStudyBuilder
-
Remove all the objectives
License requirements: None.
- removeAllObjectives() - Method in interface nxopen.optimization.OptimizationBuilder
-
Remove all the objectives
License requirements: None.
- removeAllPlugins() - Method in interface nxopen.routing.CustomManager
-
Removes all the registered plugins, except those configured in the Application View (APV) file.
- removeAllPoints() - Method in interface nxopen.geometricutilities.AlignmentMethodBuilder
-
Remove all alignment points.
- removeAllRegionPoints() - Method in interface nxopen.features.shipdesign.PlateBuilder
-
Removes all region points.
- removeAllRelatedExpressions() - Method in interface nxopen.assemblies.productinterface.InterfaceObject
-
Removes all related expressions from the product interface object
License requirements: None.
- removeAllRelatedExpressions() - Method in interface nxopen.features.PartGeometryCopySelectBuilder
-
Removes all related expression objects
License requirements: None.
- removeAllRules() - Method in interface nxopen.RuleManager
-
Remove all rules in the part.
- removeAllRules() - Method in interface nxopen.uf.UFKf
-
- removeAllSearchResultElementsFromSelectedList() - Method in interface nxopen.assemblies.MechanicalRoutingSubsetBuilder
-
- removeAllSegmentBuilders() - Method in interface nxopen.motion.RoadBuilder
-
Remove a segment
License requirements: mechanisms ("MECHANISMS")
.
- removeAllShaping() - Method in interface nxopen.routing.SplinePathBuilder
-
Removes all shaping applied to the spline (Lock length, slacking).
- removeAllSimulationObjects() - Method in interface nxopen.cae.SimSolution
-
Remove all simulation objects from the solution
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- removeAllSimulationObjects() - Method in interface nxopen.cae.SimSolutionStep
-
Remove all simulation objects from the step
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- removeAllSupports() - Method in interface nxopen.mfg.am.Part
-
Removes all the supports from the part
License requirements: am_pb_mtls_sg_2 ("Advanced NX Additive Support Geometry") OR am_pb_mtls_sg_1 ("Basic NX Additive Support Geometry")
.
- removeAllVariables() - Method in interface nxopen.optimization.DesignStudyBuilder
-
Remove all the variables
License requirements: None.
- removeAllVariables() - Method in interface nxopen.optimization.OptimizationBuilder
-
Remove all the variables
License requirements: None.
- removeAndUnassociateUnit(TaggedObject) - Method in interface nxopen.tooldesigner.SelectFixtureUnitsBuilder
-
RemoveAndUnassociateUnit
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- removeAnnotationWithoutPlane() - Method in interface nxopen.cae.NoteCollection
-
Removes CAE annotation without plane
License requirements: nx_masterfem ("Finite Element Modeling")
.
- removeArguments(BaseArgument[]) - Method in interface nxopen.report.CommandBuilder
-
Removes the arguments.
- removeArray(AMEBaseNode[]) - Method in interface nxopen.ame.SelectAMEBaseNodeList
-
Remove specified objects from list.
- removeArray(Annotation[]) - Method in interface nxopen.annotations.SelectAnnotationList
-
Remove specified objects from list.
- removeArray(BaseCustomSymbol[]) - Method in interface nxopen.annotations.SelectBaseCustomSymbolList
-
Remove specified objects from list.
- removeArray(OrdinateDimension[]) - Method in interface nxopen.annotations.SelectOrdinateDimensionList
-
Remove specified objects from list.
- removeArray(TableSection[]) - Method in interface nxopen.annotations.SelectTableSectionList
-
Remove specified objects from list.
- removeArray(Component[]) - Method in interface nxopen.assemblies.SelectComponentList
-
Remove specified objects from list.
- removeArray(CAEBody[]) - Method in interface nxopen.cae.SelectCAEBodyList
-
Remove specified objects from list.
- removeArray(CAEEdge[]) - Method in interface nxopen.cae.SelectCAEEdgeList
-
Remove specified objects from list.
- removeArray(CAEFace[]) - Method in interface nxopen.cae.SelectCAEFaceList
-
Remove specified objects from list.
- removeArray(FEElemFace[]) - Method in interface nxopen.cae.SelectFEElemFaceList
-
Remove specified objects from list.
- removeArray(FENode[]) - Method in interface nxopen.cae.SelectFENodeList
-
Remove specified objects from list.
- removeArray(Mesh[]) - Method in interface nxopen.cae.SelectMeshList
-
Remove specified objects from list.
- removeArray(CAMFeature[]) - Method in interface nxopen.cam.SelectCAMFeatureList
-
Remove specified objects from list.
- removeArray(DraftingView[]) - Method in interface nxopen.drawings.SelectDraftingViewList
-
Remove specified objects from list.
- removeArray(DrawingView[]) - Method in interface nxopen.drawings.SelectDrawingViewList
-
Remove specified objects from list.
- removeArray(FacetedBody[]) - Method in interface nxopen.facet.SelectFacetedBodyList
-
Remove specified objects from list.
- removeArray(BodyFeature[]) - Method in interface nxopen.features.SelectBodyFeatureList
-
Remove specified objects from list.
- removeArray(DatumCsys[]) - Method in interface nxopen.features.SelectDatumCsysList
-
Remove specified objects from list.
- removeArray(Feature[]) - Method in interface nxopen.features.SelectFeatureList
-
Remove specified objects from list.
- removeArray(SubdivisionBody[]) - Method in interface nxopen.features.subdivision.SelectSubdivisionBodyList
-
Remove specified objects from list.
- removeArray(Component[]) - Method in interface nxopen.layout2d.SelectComponentList
-
Remove specified objects from list.
- removeArray(CollisionSensor[]) - Method in interface nxopen.mechatronics.SelectCollisionSensorList
-
Remove specified objects from list.
- removeArray(HydraulicCylinder[]) - Method in interface nxopen.mechatronics.SelectHydraulicCylinderList
-
Remove specified objects from list.
- removeArray(LogicObject[]) - Method in interface nxopen.mechatronics.SelectLogicObjectList
-
Remove specified objects from list.
- removeArray(PneumaticCylinder[]) - Method in interface nxopen.mechatronics.SelectPneumaticCylinderList
-
Remove specified objects from list.
- removeArray(Body[]) - Method in interface nxopen.SelectBodyList
-
Remove specified objects from list.
- removeArray(CoordinateSystem[]) - Method in interface nxopen.SelectCoordinateSystemList
-
Remove specified objects from list.
- removeArray(Curve[]) - Method in interface nxopen.SelectCurveList
-
Remove specified objects from list.
- removeArray(DatumPlane[]) - Method in interface nxopen.SelectDatumPlaneList
-
Remove specified objects from list.
- removeArray(DisplayableObject[]) - Method in interface nxopen.SelectDisplayableObjectList
-
Remove specified objects from list.
- removeArray(Edge[]) - Method in interface nxopen.SelectEdgeList
-
Remove specified objects from list.
- removeArray(Expression[]) - Method in interface nxopen.SelectExpressionList
-
Remove specified objects from list.
- removeArray(Face[]) - Method in interface nxopen.SelectFaceList
-
Remove specified objects from list.
- removeArray(IBaseCurve[]) - Method in interface nxopen.SelectIBaseCurveList
-
Remove specified objects from list.
- removeArray(IBasePlane[]) - Method in interface nxopen.SelectIBasePlaneList
-
Remove specified objects from list.
- removeArray(ICurve[]) - Method in interface nxopen.SelectICurveList
-
Remove specified objects from list.
- removeArray(INXObject[]) - Method in interface nxopen.SelectINXObjectList
-
Remove specified objects from list.
- removeArray(IParameterizedSurface[]) - Method in interface nxopen.SelectIParameterizedSurfaceList
-
Remove specified objects from list.
- removeArray(ModelingView[]) - Method in interface nxopen.SelectModelingViewList
-
Remove specified objects from list.
- removeArray(NXObject[]) - Method in interface nxopen.SelectNXObjectList
-
Remove specified objects from list.
- removeArray(TaggedObject[]) - Method in interface nxopen.SelectObjectList
-
Remove specified objects from list.
- removeArray(Part[]) - Method in interface nxopen.SelectPartList
-
Remove specified objects from list.
- removeArray(Point[]) - Method in interface nxopen.SelectPointList
-
Remove specified objects from list.
- removeArray(Spline[]) - Method in interface nxopen.SelectSplineList
-
Remove specified objects from list.
- removeArray(TaggedObject[]) - Method in interface nxopen.SelectTaggedObjectList
-
Remove specified objects from list.
- removeArray(View[]) - Method in interface nxopen.SelectViewList
-
Remove specified objects from list.
- removeAssignedSymbol(String) - Method in interface nxopen.ame.Manage2dSymbolsBuilder
-
Removes the given 2d symbol from the assigned symbols list
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- removeAssociatedObjects() - Method in interface nxopen.cae.CaeLabel
-
Remove Associated Objects from the CAE Labels
License requirements: nx_masterfem ("Finite Element Modeling")
.
- removeAssociatedObjects() - Method in interface nxopen.cae.CaeNote
-
Remove Associated Objects from the CAE Notes
License requirements: nx_masterfem ("Finite Element Modeling")
.
- removeAttachment(PenetrationFolder, PenetrationAttachment) - Method in interface nxopen.features.shipdesign.PenetrationUtils
-
Remove an attachment from folder
License requirements: nx_penetration_mgmt ("Penetration Management")
.
- removeAttachment(IssueAttachment) - Method in interface nxopen.issue.IssueContent
-
Removes an
IssueAttachment
License requirements: nx_issue_mgmt ("NX Issue Tracking")
Created in NX8.5.0
- removeAttachment(IssueAttachment) - Method in interface nxopen.issue.IssueContentBuilder
-
Removes an
IssueAttachment
License requirements: nx_issue_mgmt ("NX Issue Tracking")
Created in NX8.5.0
- removeAttachment(IssueAttachment) - Method in interface nxopen.issue.IssueFolder
-
Removes an
IssueAttachment
License requirements: nx_issue_mgmt ("NX Issue Tracking")
Created in NX8.5.0
- removeAttribute(TaggedObject, String, String, int) - Method in interface nxopen.features.shipdesign.QualifySketchBuilder
-
Removes attributes from the entity.
- removeAttributeEditHandler(int) - Method in interface nxopen.LinkedPartManager
-
Unregisters the attribute edit handler
License requirements: None.
- removeAttributeOfObject(NXObject, String) - Method in interface nxopen.tooling.FaceColorManagementBuilder
-
Remove attribute of object
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- removeAutoRefinementConstraint(CfdAutoRefinementConstraint) - Method in interface nxopen.cae.FluidDomainRecipe
-
Removes a
CfdAutoRefinementConstraint
constraint
License requirements: nx_adv_fld_mod_solv ("NX Advanced Fluid Modeling - Full") OR sc_acou_meshing (" SC Acoustic Meshing")
Created in NX11.0.0
- removeAutoRoutePlugin() - Method in interface nxopen.routing.CustomManager
-
Removes any registered autoroute plugin, except one configured in the Application View (APV) file.
- removeBaseDataAttr() - Method in interface nxopen.features.vehicledesign.BaseDataSourceBuilder
-
Returns the method to remove Base Data attribute of work part, it is a locked attribute.
- removeBaseDataSourceAttr() - Method in interface nxopen.features.vehicledesign.BaseDataSourceBuilder
-
Returns the method to remove Base Data Source attribute of work part, it is a locked attribute.
- removeBc(SimBC) - Method in interface nxopen.cae.SimLbcFolder
-
Remove a child folder
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- removeBc(SimBC) - Method in interface nxopen.cae.SimSolution
-
Remove the bc from the solution
Only the BC that not under the folder can be remove from solution
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- removeBc(SimBC) - Method in interface nxopen.cae.SimSolutionStep
-
Remove the bc from the step
Only the BC that not under the folder can be removed from solution
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- removeBc(SimSolution, SimBC) - Method in interface nxopen.cae.SolutionManager
-
Remove bc from a solution
License requirements: nx_masterfem ("Finite Element Modeling")
.
- removeBc(SimSolutionStep, SimBC) - Method in interface nxopen.cae.StepManager
-
Remove bc from a step
License requirements: nx_masterfem ("Finite Element Modeling")
.
- removeBendsOfRadialBends() - Method in interface nxopen.formboard.UpdateFormboardBuilder
-
Removes bends in all radial bends and replaces them with a linear segment
going from the anchor to the free RCP of each radial bend.
- removeBlank() - Method in interface nxopen.tooling.BlankGeneratorBuilder
-
Remove a blank.
- removeBlendFaces(NXObject[]) - Method in interface nxopen.cam.Splitter
-
Remove the blend faces
License requirements: cam_base ("CAM BASE")
.
- removeBlends() - Method in interface nxopen.features.shipdesign.PlateDivideBuilder
-
Returns the option to remove blends.
- removeBlends() - Method in interface nxopen.features.shipdesign.ShipPreparationBuilder
-
Returns the option to remove blends.
- removeBlends() - Method in interface nxopen.features.shipdesign.ShipPreparationInfo
-
Returns the option to remove blends.
- removeBomPlugin() - Method in interface nxopen.routing.CustomManager
-
Removes any registered bill of materials plugin, except one configured in the Application View (APV) file.
- removeBothRailing() - Method in interface nxopen.linedesigner.DBStairwayEquipmentNode
-
An API to remove both railings to stairway
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- removeBoundary() - Method in interface nxopen.geometricutilities.LocalUntrimBuilder
-
Returns the flag to indicate whether to remove the face boundary or not.
- removeBreakout(Tag, boolean) - Method in interface nxopen.uf.UFDraw
-
- removeBreakRegion(Tag, boolean) - Method in interface nxopen.uf.UFDraw
-
- removeBundlePlugin() - Method in interface nxopen.routing.CustomManager
-
Removes any registered bundle plugin, except one configured in the Application View (APV) file.
- removeCallback(int) - Method in interface nxopen.routing.CustomManager
-
Removes the registered callback.
- removeChainset(int) - Method in interface nxopen.features.EdgeBlendBuilder
-
Delete an edge blend chainset from the edge blend.
- removeChainsetByCollector(ScCollector) - Method in interface nxopen.features.EdgeBlendBuilder
-
Delete an edge blend chainset from the edge blend.
- removeChamfer() - Method in interface nxopen.features.CurveFinderBuilder
-
Removes chamfer relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- removeCharacteristics(String, WeldAttribType, String) - Method in interface nxopen.weld.WeldPointBuilder
-
Remove characteristics for selected points, need to set the current point prior to calling this method
License requirements: ugweld ("UG WELD")
.
- removeChild(NavigatorNode) - Method in interface nxopen.shipdesign.NavigatorNode
-
Removes a child node.
- removeChildFromCondition(Condition, Condition) - Method in interface nxopen.visualreporting.VisualReportBuilder
-
Removes a condition from its parent condition.
- removeChoosePartPlugin() - Method in interface nxopen.routing.CustomManager
-
Removes any registered choose part plugin, except one configured in the Application View (APV) file.
- removeClass(String, String) - Method in interface nxopen.cam.Teaching
-
Removes a class
License requirements: fbm_author ("FBM Author")
.
- removeClause(int[]) - Method in interface nxopen.ame.AMEQuery
-
- removeClauses(NXObject[]) - Method in interface nxopen.ame.AMEQuery
-
Remove clauses from Query
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- removeClocking() - Method in interface nxopen.features.InstanceFeatureBuilder
-
- removeClocking(int, int) - Method in interface nxopen.geometricutilities.PatternDefinition
-
Removes clocking from pattern definition instance
License requirements: None.
- removeCmpPostExportPlugin() - Method in interface nxopen.routing.CustomManager
-
Removes any registered post-export CMP plugin, except one configured in the Application View (APV) file.
- removeCmpPreImportPlugin() - Method in interface nxopen.routing.CustomManager
-
Removes any registered pre-import CMP plugin, except one configured in the Application View (APV) file.
- removeCoincident() - Method in interface nxopen.features.CurveFinderBuilder
-
Removes coincident vertex relations of the last vertexes added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- removeCoincident2dComponent() - Method in interface nxopen.features.CurveFinderBuilder
-
Removes coincident 2d component relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- removeCoincidentSketchGroup() - Method in interface nxopen.features.CurveFinderBuilder
-
Removes coincident sketch group relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- removeColorAttribute() - Method in interface nxopen.cae.AttributeSelectionRecipe
-
Removes the color attribute.
- removeColumn(Tag) - Method in interface nxopen.uf.UFTabnot
-
- removeColumns(int, int) - Method in interface nxopen.diagramming.tables.TableBuilder
-
The method to remove the given number of columns starting with the given column index.
- removeComponent(Component) - Method in interface nxopen.assemblies.ComponentAssembly
-
Removes a component from this assemebly.
- removeComponent(Component) - Method in interface nxopen.assemblies.ComponentGroup
-
Removes a component from a component group
License requirements: adv_assemblies ("ADVANCED ASSEMBLIES")
.
- removeComponent(int, String) - Method in interface nxopen.display.IrayPlusMaterialEditorBuilder
-
Removes a component to layers for specific layer index
Let material ''Varnished Cherry' for example:
If use changed the material has two Layers: Dir1 and ClearCoat.
- removeComponent(NXObject) - Method in interface nxopen.features.shipdesign.ManufacturingAssemblyNavigatorBuilder
-
Remove a container part from the assembly
License requirements: nx_ship_mfg_prep ("Ship Manufacturing")
.
- removeComponent(Component[]) - Method in interface nxopen.mechatronics.SystemObject
-
- removeComponent(Component) - Method in interface nxopen.mfg.am.BuildTray
-
Remove a component (occurrence) from the build tray
License requirements: am_pb_cam_basic ("Basic NX Powder Bed Additive Manufacturing Application")
.
- removeComponent(NXObject) - Method in interface nxopen.tooling.FastenerRemoveNodeBuilder
-
Removes component.
- removeComponent() - Method in interface nxopen.tooling.StandardPartBuilder
-
Removes the selected standard part component.
- removeComponents(Component[]) - Method in interface nxopen.routing.RouteManager
-
Removes the
Component
objects from the assembly
and updates the routing path data.
- removeConcentric() - Method in interface nxopen.features.CurveFinderBuilder
-
Removes concentric relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- removeConcentric2dComponent() - Method in interface nxopen.features.CurveFinderBuilder
-
Removes concentric 2d component relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- removeConcentricSketchGroup() - Method in interface nxopen.features.CurveFinderBuilder
-
Removes concentric sketch group relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- removeCondition() - Method in interface nxopen.ame.ConditionsBuilder
-
Remove the condition for the rule
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- removeConlinear() - Method in interface nxopen.features.CurveFinderBuilder
-
Removes conlinear relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- removeConlinear2dComponent() - Method in interface nxopen.features.CurveFinderBuilder
-
Removes conlinear 2d component relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- removeConlinearSketchGroup() - Method in interface nxopen.features.CurveFinderBuilder
-
Removes conlinear sketch group relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- removeConnectedPartsInBuilder() - Method in interface nxopen.routing.TransformPathBuilder
-
- removeConnections(IConnection[]) - Method in interface nxopen.cae.connections.Element
-
Removes a connection from this element.
- removeConstraint(Point) - Method in interface nxopen.features.FitCurveBuilder
-
Makes existing positional constraint a free target point
License requirements: solid_modeling ("SOLIDS MODELING")
.
- removeConstraint(Constraint) - Method in interface nxopen.positioning.Network
-
- removeConstraintSet(SimConstraintSet) - Method in interface nxopen.cae.SimConstraintGroup
-
Removes a constraint set from this group
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- removeContactPreventionConstraint(CfdContactPreventionConstraint) - Method in interface nxopen.cae.FluidDomainRecipe
-
Removes a
CfdContactPreventionConstraint
constraint
License requirements: nx_adv_fld_mod_solv ("NX Advanced Fluid Modeling - Full") OR sc_acou_meshing (" SC Acoustic Meshing")
Created in NX9.0.0
- removeControllingExp(Tag) - Method in interface nxopen.uf.UFDrf
-
- removeCorner() - Method in interface nxopen.routing.ControlPoint
-
Remove the assigned corner.
- removeCorner(Tag) - Method in interface nxopen.uf.UFRoute
-
- removeCurve(Curve) - Method in interface nxopen.geometricutilities.CurveShapingBuilder
-
Removes a curve
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- removeCurves(NXObject[]) - Method in interface nxopen.cam.BoundarySet
-
Remove curves from the boundary
License requirements: cam_base ("CAM BASE")
.
- removeCurveSenseFromMap(NXObject) - Method in interface nxopen.features.OffsetMoveCurveBuilder
-
This function remove a curve and its sense from the curve_sense_map when deselect a curve
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- REMOVED - Static variable in class nxopen.issue.IssueManager.State
-
Removed state
- REMOVED - Static variable in class nxopen.mechatronics.ComparisonResultElectricalPart.Status
-
Removed status
- removeDanglingRods() - Method in interface nxopen.features.LatticeBuilder
-
Returns whether to remove dangling rods from the lattice body.
- removeData() - Method in interface nxopen.features.EditCrossSectionBuilder
-
Remove the section data.
- removeDataSet(String) - Method in interface nxopen.tooling.ValidCheckBuilder
-
The action to delete a data set
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- removeDataSource(int) - Method in interface nxopen.cae.DurSpecialistDataSources
-
Remove a file
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- removeDatumIconHandler(int) - Method in interface nxopen.weld.CustomManager
-
Unregisters the datum common icon handler
License requirements: None.
- removeDatumPlanes(DatumPlane[]) - Method in interface nxopen.display.PlanarShipGrid
-
Removes the specific datum planes from the planar grid.
- removeDatumsButton() - Method in interface nxopen.tooldesigner.SelectDatumsBuilder
-
TODO: fill in a description for this
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- removeDatumsFromSession(boolean) - Method in interface nxopen.tooldesigner.SelectDatumsBuilder
-
Remove all unselected datums from their subset
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- removededgecounts - Variable in class nxopen.Part.RemoveMissingParentsFromEdgeBlendData
-
the count of removed edges for each of the edge blend features with missing parents
- removeDependencies(CAMObject[]) - Method in interface nxopen.cam.CAMSetup
-
Remove dependencies of selected objects
License requirements: cam_base ("CAM BASE")
.
- removeDeselectedAcrossObject(DisplayableObject) - Method in interface nxopen.features.shipdesign.StandardPartItemBuilder
-
Removes the specific object from the deselected across object list.
- removeDesignElement() - Method in interface nxopen.tooling.AddReusablePart
-
Removes design element component
License requirements: None.
- removeDesignElements(NXObject[]) - Method in interface nxopen.assemblies.Subset
-
Removes the design elements from this subset.
- removeDesignRule(int) - Method in interface nxopen.routing.CustomManager
-
Removes the registered design rule.
- removedFaces - Variable in class nxopen.uf.UFModl.SimplData
-
- removedFacesCollector() - Method in interface nxopen.features.ShellBuilder
-
Returns the set of faces to be removed from the shelled body.
- removeDfaFile(String) - Method in interface nxopen.pdm.PartOperationImportBuilder
-
Remove the dfa file
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- removeDirectory(String) - Method in interface nxopen.RemoteUtilities
-
Deletes a directory.
- removeDisciplineChangedPlugin() - Method in interface nxopen.routing.CustomManager
-
Removes any registered discpline changed plugin.
- removeDisconnectedRods() - Method in interface nxopen.features.LatticeBuilder
-
Returns whether to remove small disconnected lattice portions keeping just the largest body.
- removeDiscontinuity() - Method in interface nxopen.preferences.SessionNXGateway
-
Returns the remove discontinuity flag.
- RemoveDiscontinuityBuilder - Interface in nxopen.routing
-
- removeDivideEvent(int) - Method in interface nxopen.cam.ToolPathDivideBuilder
-
Deletes the divide event at the given index
License requirements: None.
- removeDmvRotationPlane(Tag) - Method in interface nxopen.uf.UFDraw
-
- removeDraftPoints(DraftPointData[]) - Method in interface nxopen.geometricutilities.DraftVariableAngleData
-
Removes
DraftPointData
objects
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX4.0.0
- removeDrawingAutomationWizardHandler(int) - Method in interface nxopen.DrawingUtils
-
Unregisters a user defined method that is called whenever Booklet Wizard is committed.
- removeDuctSizeCalculatorCreateStockPlugin() - Method in interface nxopen.routing.CustomManager
-
Removes any registered create stock plugin, except one configured in the Application View (APV) file.
- removeDuctSizeCalculatorDisplayNotePlugin() - Method in interface nxopen.routing.CustomManager
-
Removes any registered display note plugin, except one configured in the Application View (APV) file.
- removeEdgeChainAndPointOnEdgeChainData() - Method in interface nxopen.features.EdgeBlendBuilder
-
Remove all existing edge chain data and point on edge chain data
License requirements: solid_modeling ("SOLIDS MODELING")
.
- removeEdges(Edge[]) - Method in interface nxopen.tooling.QuickDatumCsysBuilder
-
Romoves the selected edges.
- removeEdit(DisplayableObject[]) - Method in interface nxopen.ViewDependentDisplayManager
-
Removes edits from specified objects in a view.
- removeEffectivityRows(EffectivityTableRow[]) - Method in interface nxopen.pdm.EffectivityTableBuilder
-
Removes the given effectivity rows from
EffectivityTableBuilder
License requirements: nx_4gd_integration ("4th Generation Design")
Created in NX9.0.0
- removeEjectorType() - Method in interface nxopen.tooling.EjectorTableBuilder
-
Deletes the specified type from ejector pins.
- removeElementByIndex(int) - Method in interface nxopen.mechatronics.CamProfileBuilder
-
Remove element by index.
- removeElementsFromNamedPropertyTableArrayPropertyValue(String, NamedPropertyTable[]) - Method in interface nxopen.cae.PropertyTable
-
Remove elements from the referenced object array value of the property
License requirements: None.
- removeEndExtensions() - Method in interface nxopen.annotations.CenterlineBuilder
-
Removes extensions only at ends
License requirements: drafting ("DRAFTING")
.
- removeEngineNodes() - Method in interface nxopen.features.CurveFinderBuilder
-
Close the VTK interaction and Remove all nodes from the Engine
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- removeEntities(TaggedObject[]) - Method in interface nxopen.cae.CaeGroup
-
Removes entities from the group
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- removeEntities(NXObject[]) - Method in interface nxopen.features.ChangeShellThicknessBuilder
-
Removes entities
License requirements: None.
- removeEntity(Tag, int, Tag[]) - Method in interface nxopen.uf.UFPlist
-
- removeEntryFromMachineLibrary(String) - Method in interface nxopen.sim.MachineLibraryBuilder
-
Removes a machine entry from the machine_database.dat.
- removeEqualRadius() - Method in interface nxopen.features.CurveFinderBuilder
-
Removes equal radius relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- removeEqualRadius2dComponent() - Method in interface nxopen.features.CurveFinderBuilder
-
Removes equal radius 2d component relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- removeEqualRadiusSketchGroup() - Method in interface nxopen.features.CurveFinderBuilder
-
Removes equal radius sketch group relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- removeErasure(DisplayableObject[]) - Method in interface nxopen.ViewDependentDisplayManager
-
- removeErasureOnObjectAndSubobjects(DisplayableObject[], boolean) - Method in interface nxopen.ViewDependentDisplayManager
-
Removes erasures from specified objects and optional subobjects in a view.
- removeEvaluationFilter(ScEvaluationFiltertype) - Method in interface nxopen.ScCollector
-
Removes the evaluation filter on ScCollector
License requirements: None.
- removeExciterConfig(int) - Method in interface nxopen.cae.PreTestExciterConfigCollection
-
Removes and deletes a exciter selection configuration
License requirements: nx_correl_base ("FE Correlation")
.
- removeExistingStock() - Method in interface nxopen.routing.FillerStockBuilder
-
Returns the remove existing stock flag.
- removeExistingStock() - Method in interface nxopen.routing.StockBuilder
-
Returns the remove existing stock flag.
- removeExpressions(Expression[]) - Method in interface nxopen.ExpressionGroup
-
Remove expressions from a group.
- removeExtension(int) - Method in interface nxopen.annotations.CenterlineBuilder
-
Removes extension based on select object index
License requirements: drafting ("DRAFTING")
.
- removeExternalPoints(NXObject[]) - Method in interface nxopen.cam.InspectionMeasDataBuilder
-
Remove external points from measured data
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- removeExtrudeSetup(LaminateExtrudeSetup) - Method in interface nxopen.cae.LaminateExtrudeSetupCollection
-
Remove and delete an
LaminateExtrudeSetup
from the model
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
Created in NX8.5.0
- removeFace() - Method in interface nxopen.die.QuickBinderBuilder
-
Remove a face from the binder body.
- removeFaceBoundary(TaggedObject) - Method in interface nxopen.cam.Boundary
-
Remove the face boundaries
License requirements: cam_base ("CAM BASE")
.
- removeFacePair(Face, Face) - Method in interface nxopen.features.sheetmetal.ClosedCornerBuilder
-
Removes a face pair (that represents a unique corner) from the list of face pairs already added.
- removeFacePair(Face, Face) - Method in interface nxopen.features.sheetmetal.EditCornerBuilder
-
Removes a face pair (that represents a unique corner) from the list of face pairs already added.
- removeFacePair(Face, Face) - Method in interface nxopen.features.sheetmetal.ThreeBendCornerBuilder
-
Removes a face pair (that represents a unique corner) from the list of face pairs already added.
- removeFaces(NXObject[]) - Method in interface nxopen.cam.MultiBladeBaseGeometry
-
Remove the faces
License requirements: cam_base ("CAM BASE")
.
- removeFamilyInstance(Part) - Method in interface nxopen.tooling.AddReusablePart
-
Removes an instance of a part family member
License requirements: None.
- removeFastenerConstraints(int) - Method in interface nxopen.tooling.FastenerAssy
-
Removes fastener assembly constraint
License requirements: None.
- removeFeature(CAMFeature) - Method in interface nxopen.cam.FeatureGeometryGroup
-
Removes a feature from the feature geometry group
License requirements: cam_base ("CAM BASE")
.
- removeFeature(CAMFeature) - Method in interface nxopen.cam.Operation
-
Remove a machining feature
License requirements: cam_base ("CAM BASE")
.
- removeFeature(Tag, UFVariant) - Method in interface nxopen.uf.UFFbmGeom
-
- removeFeatureGroupFromConvertibleSet(FeatureGroup[]) - Method in interface nxopen.geometricutilities.ConvertFeatureGroupsToModulesBuilder
-
Remove feature group from convertible set
License requirements: None.
- removeFeatureParameters(Face) - Method in interface nxopen.features.IFormBuilder
-
Removes parameters of a owning feature of a face to be deformed
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- removeFeatureParameters(Face) - Method in interface nxopen.features.PoleSmoothingBuilder
-
Removes parameters of a owning feature of a face to be smoothed
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- removeFeatureType(String) - Method in interface nxopen.cam.FeatureTeaching
-
Removes a feature type
License requirements: fbm_author ("FBM Author")
.
- removeFemMappedToAssemblyComponent(Component) - Method in interface nxopen.cae.AssyFEModel
-
Remove fem component mapped to assembly component in an assembly fem
License requirements: nx_masterfem ("Finite Element Modeling")
.
- removeField(UserDefinedFeatureApplicationField) - Method in interface nxopen.features.UserDefinedFeatureApplicationData
-
Removes named field.
- removeField(Tag, int) - Method in interface nxopen.uf.UFPlist
-
- removeFile(String) - Method in interface nxopen.annotations.ImportAutocadBlockBuilder
-
Removes a file from import list
License requirements: nx_layout ("NX Layout")
.
- removeFilter() - Method in interface nxopen.tooling.ScrapDesignBuilder
-
Returns the removing filter
License requirements: None.
- removeFilterBlankingPlugin() - Method in interface nxopen.routing.CustomManager
-
Removes any registered filter blanking plugin, except one configured in the Application View (APV) file.
- removeFilterConditionFromRule(Rule) - Method in interface nxopen.visualreporting.VisualReportBuilder
-
Removes any existing filter
Condition
from this rule.
- removeFlangeEntities(int, TaggedObject[]) - Method in interface nxopen.cae.connections.IFlangesContainer
-
Remove entities from flange.
- removeFolder(String) - Method in interface nxopen.annotations.ImportAutocadBlockBuilder
-
Removes a folder from import list
License requirements: nx_layout ("NX Layout")
.
- removeFolder(SimLbcFolder) - Method in interface nxopen.cae.SimSolution
-
Remove the folder from the solution
Only the folder not under other folder can be removed from solution.
- removeFolder(SimLbcFolder) - Method in interface nxopen.cae.SimSolutionStep
-
Remove the folder from the solution
Only the folder not under other folder can be removed from solution.
- removeFolder(SimSolution, SimLbcFolder) - Method in interface nxopen.cae.SolutionManager
-
Remove bc folder from a solution
License requirements: nx_masterfem ("Finite Element Modeling")
.
- removeFolder(SimSolutionStep, SimLbcFolder) - Method in interface nxopen.cae.StepManager
-
Remove bc folder from a step
License requirements: nx_masterfem ("Finite Element Modeling")
.
- removeForcedValidity() - Method in interface nxopen.routing.PortConnection
-
Removes the forced validity setting on the connection.
- removeForEdit(boolean) - Method in interface nxopen.features.Feature
-
Remove all the feature faces before a NoHistory mode edit.
- removeFormboardPlacementCSysDesignation() - Method in interface nxopen.routing.RouteManager
-
Removes the designation of any Formboard Placement Coordinate System for the part
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- REMOVEFROM_LIST - Static variable in class nxopen.tooling.PiercingInsertMiniToolsBuilder.AssociationToolItems
-
- removeFromChangeover() - Method in interface nxopen.tooling.ChangeoverManagementBuilder
-
Remove selected components from the selected changeover.
- removeFromCset(Tag, Tag) - Method in interface nxopen.uf.UFAssem
-
- removeFromDeleteList(NXObject[]) - Method in interface nxopen.Update
-
- removeFromGroup(AMEGroup, IEngObject) - Method in interface nxopen.ame.AMEManager
-
Removes an engineering object from a group
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- removeFromPartitions(Partition[]) - Method in interface nxopen.assemblies.DesignElementBuilder
-
Specify partitions from which the design elements will be removed.
- removeFromSelectedBCsList(SimBC[]) - Method in interface nxopen.cae.BCSelectionDisplayBuilder
-
Remove BCs from the Selected BCs List
License requirements: None.
- removeFromSelectionList(SelectionHandle, NXObject[], boolean) - Method in interface nxopen.Selection
-
- removeFromSelList(UFVariant, int, Tag[], boolean) - Method in interface nxopen.uf.UFUi
-
- removeFromSolutionNx(int, Tag) - Method in interface nxopen.uf.UFSf
-
- removeFromStack() - Method in interface nxopen.annotations.Annotation
-
Removes the annotation from a stack.
- removeFromStepNx(int, Tag) - Method in interface nxopen.uf.UFSf
-
- removeFromTask(PositioningGroup) - Method in interface nxopen.assemblies.PositioningTask
-
- removeFromTerminal(LogicalTerminal) - Method in interface nxopen.routing.LogicalConnection
-
- removeFromView(View) - Method in interface nxopen.annotations.PmiFilter
-
Removes a PMI filter from a view.
- removeFromViewSet(Tag, UFView.StandardOrientation) - Method in interface nxopen.uf.UFView
-
- removeFunction(int) - Method in interface nxopen.cae.DurabilityDamageEvaluationBuilder
-
Removes the function.
- removeGashes() - Method in interface nxopen.features.ThickenBuilder
-
Returns the remove gashes option.
- removeGlobalBc(SimBC) - Method in interface nxopen.cae.StepManager
-
Remove bc from global bc group in solution
License requirements: nx_masterfem ("Finite Element Modeling")
.
- removeGlobalFolder(SimLbcFolder) - Method in interface nxopen.cae.StepManager
-
Remove bc folder from global bc group in solution
License requirements: nx_masterfem ("Finite Element Modeling")
.
- removeGlobalLoadset(SimLoadSet) - Method in interface nxopen.cae.StepManager
-
Remove bc from global bc group in solution
License requirements: nx_masterfem ("Finite Element Modeling")
.
- removeGroupMember(SheetElement) - Method in interface nxopen.diagramming.NodeBuilder
-
Removes a node from this node group.
- removeHandShapeLib(String) - Method in interface nxopen.features.HumanBuilder
-
Remove hand shape library
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- removeHeaders(int, int) - Method in interface nxopen.diagramming.tables.TableBuilder
-
The method to remove the given number of headers starting with the given header index.
- removeHoleData(String) - Method in interface nxopen.tooling.RemoveHolesBuilder
-
Remove the hole from hole data from builder.
- removeHoles() - Method in interface nxopen.features.sheetmetal.MetaformBuilder
-
Returns the remove holes
License requirements: None.
- RemoveHolesBuilder - Interface in nxopen.tooling
-
Remove Hole is used to patch holes for a solid body.
- RemoveHolesBuilder.SelectionTypes - Class in nxopen.tooling
-
select object types, body or face
- removeHrnPostExportPlugin() - Method in interface nxopen.routing.CustomManager
-
Removes any registered post-export HRN plugin, except one configured in the Application View (APV) file.
- removeHrnPreImportPlugin() - Method in interface nxopen.routing.CustomManager
-
Removes any registered pre-import HRN plugin, except one configured in the Application View (APV) file.
- removeIgnored(Tag, Tag) - Method in interface nxopen.uf.UFAssem
-
- removeIncludedConstraints() - Method in interface nxopen.features.CurveFinderBuilder
-
Remove all the included constraint
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- removeInheritedAttributes() - Method in interface nxopen.weld.CharacteristicsBuilder
-
Remove any attributes that are inherited from other objects (for example, edges).
- removeInitializeCallback(int) - Method in interface nxopen.pdm.PartOperationImportObserver
-
Unregisters the user defined Initialize callback
License requirements: None.
- removeInstance(StandardPartItemBuilder) - Method in interface nxopen.features.shipdesign.StandardPartFrameworkBuilder
-
Removes the standard part instance.
- removeInstance(int, int) - Method in interface nxopen.geometricutilities.PatternClockingBuilder
-
Removes an instance from this clocking
License requirements: None.
- removeInstance(Tag) - Method in interface nxopen.uf.UFAssem
-
- removeInterfaces(String[]) - Method in interface nxopen.ame.MountingInterfaceBuilder
-
Delete input
MountingInterface
objects
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
Created in NX12.0.0
- removeIntermediateTerminal(LogicalTerminal) - Method in interface nxopen.routing.electrical.Connection
-
Remove an intermediate terminal from this connection
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- removeInterpartReferences(String) - Method in interface nxopen.ExpressionCollection
-
Removes the interpart references from a part.
- removeIsInHistoryBuffer(int) - Method in interface nxopen.sim.IsvControlPanelBuilder
-
Unregisters the IsInHistoryBufferChanged callback.
- removeIssue(IssueContent) - Method in interface nxopen.issue.IssueBriefcase
-
- removeJointLimits(Tag) - Method in interface nxopen.uf.UFMotion
-
- removeJointMotionInput(Tag) - Method in interface nxopen.uf.UFMotion
-
- removeKinematics() - Method in interface nxopen.cam.MachineGroupBuilder
-
Removes the machine data from the CAM setup,
but does not remove the machine part component from the CAM assembly
License requirements: cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- removeLabelParents(DisplayableObject[]) - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder
-
Removes dynamic label parents
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- removeLast(Line) - Method in interface nxopen.tooling.SectionLineCreationBuilder
-
Remove the last cut segment
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- removeLastNonPreviewControlPoint() - Method in interface nxopen.routing.LinearPathBuilder
-
Removes the last fully-defined control point in the path.
- removeLayupOffset(int) - Method in interface nxopen.cae.LaminateGlobalLayupMgr
-
A method to remove a layup offset
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- removeLeader(int) - Method in interface nxopen.annotations.BaseCustomSymbol
-
Removes leader from the custom symbol.
- removeLeader(Tag, int) - Method in interface nxopen.uf.UFGdt
-
- removeLeftRailing() - Method in interface nxopen.linedesigner.DBStairwayEquipmentNode
-
An API to remove left railing to stairway
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- removeLegsEntities(TaggedObject[]) - Method in interface nxopen.cae.connections.INodalTargetLegs
-
Remove entities from target's group of points.
- removeLimitPoints() - Method in interface nxopen.die.DieLimitsBuilder
-
Returns the indication that limit points are being removed.
- removeLinkInitialVelocity(Tag) - Method in interface nxopen.uf.UFMotion
-
- removeLinkMassProperties(Tag) - Method in interface nxopen.uf.UFMotion
-
- removeList(IssueList) - Method in interface nxopen.issue.IssueSite
-
Removes an
IssueList
License requirements: nx_issue_mgmt ("NX Issue Tracking")
Created in NX9.0.0
- removeLoadCase(LoadCase) - Method in interface nxopen.cae.aerostructures.LoadCaseSetBuilder
-
Remove a loadcase from the load case set builder
License requirements: nx_masterfem ("Finite Element Modeling")
.
- removeLoadcase(int) - Method in interface nxopen.cae.DurabilityResultPathBuilder
-
Removes a loadcase by index.
- removeLoadCases(TBSLoadCase[], boolean) - Method in interface nxopen.cae.optimization.TBSLoadCaseManager
-
Removes the load cases
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
- removeLoading(BaseDataLoadingBuilder) - Method in interface nxopen.features.vehicledesign.BaseDataBuilder
-
- removeLoadSet(SimLoadSet) - Method in interface nxopen.cae.SimLoadGroup
-
Removes a load from this group
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- removeLoadset(SimSolution, SimLoadSet) - Method in interface nxopen.cae.SolutionManager
-
Remove loadset from a solution
License requirements: nx_masterfem ("Finite Element Modeling")
.
- removeLoadset(SimSolutionStep, SimLoadSet) - Method in interface nxopen.cae.StepManager
-
Remove bc from a step
License requirements: nx_masterfem ("Finite Element Modeling")
.
- removeLocalResolutionConstraint(CfdLocalResolutionConstraint) - Method in interface nxopen.cae.FluidDomainRecipe
-
Removes a
CfdLocalResolutionConstraint
constraint
License requirements: nx_adv_fld_mod_solv ("NX Advanced Fluid Modeling - Full") OR sc_acou_meshing (" SC Acoustic Meshing")
Created in NX9.0.0
- removeLocation(int) - Method in interface nxopen.annotations.BaseCenterMarkBuilder
-
Removes location object for a given index from the Select Object List.
- removeLocation(int) - Method in interface nxopen.annotations.CircleCenterlineBuilder
-
Removes location object for a given index from the Select Object List.
- removeLocation(int, int) - Method in interface nxopen.cae.connections.ILocationsContainer
-
Remove a location from connection location list
License requirements: nx_masterfem ("Finite Element Modeling")
.
- removeLoops() - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
Returns the remove loops setting.
- removeMachine() - Method in interface nxopen.cam.CAMSetup
-
Removes:
- The machine part component from the CAM assembly
- The machine kinematics from the CAM Setup
- Carriers and Pockets from the CAM Setup, this means cleanup the Operation Navigator
License requirements: cam_base ("CAM BASE")
.
- removeMachine() - Method in interface nxopen.cam.MachineGroupBuilder
-
Removes the machine part component from the CAM assembly and
removes the machine data from the CAM setup.
- removeManualPair(int, int) - Method in interface nxopen.cae.CorrelModePairingBuilder
-
Remove a manually paired mode pair
License requirements: nx_correl_base ("FE Correlation")
.
- removeManualRoutePlugin() - Method in interface nxopen.routing.CustomManager
-
Removes any registered manual route plugin, except one configured in the Application View (APV) file.
- removeMapData(TaggedObject) - Method in interface nxopen.cae.ManualMorphBuilder
-
Removes specified manual map object from map tag array
License requirements: nx_masterfem ("Finite Element Modeling")
.
- removeMapEntityHandler(int) - Method in interface nxopen.LinkedPartManager
-
Unregisters the user defined map entity handler
License requirements: None.
- removeMaster(Part, boolean) - Method in interface nxopen.motion.MotionSimulation
-
Removes existing master part in this motion simulation assembly
License requirements: mechanisms ("MECHANISMS")
.
- removeMaterialAssignment(Tag) - Method in interface nxopen.uf.UFDisp
-
- removeMaterialOrientation(int) - Method in interface nxopen.cae.LaminateGlobalLayupMgr
-
A method to remove a material orientation
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- removeMember(SheetElement) - Method in interface nxopen.diagramming.GroupBuilder
-
Remove a member.
- removeMemberConstraints(SimConstraint[]) - Method in interface nxopen.cae.SimConstraintSet
-
Remove constraint memebers from constraint set
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- removeMemberFolders(SimLbcFolder[]) - Method in interface nxopen.cae.SimConstraintSet
-
Remove root folder memebers from constraint set
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- removeMemberFolders(SimLbcFolder[]) - Method in interface nxopen.cae.SimLoadSet
-
Remove root folder memebers from load set
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- removeMemberItems(TaggedObject[]) - Method in interface nxopen.routing.DefineRunBuilder
-
Remove a member item from the list in the builder for DefineRun
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- removeMemberLoads(SimLoad[]) - Method in interface nxopen.cae.SimLoadSet
-
Remove load memebers from load set
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- removeMemberSet(SimLoadSet) - Method in interface nxopen.cae.SimLoadSet
-
Remove a load set memeber from load set
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- removeMergedRibImprintedEdges(Face, Edge[]) - Method in interface nxopen.Body
-
Removes imprinted edges created by the merged rib rule.
- removeMergeRegionPoint(Point3d) - Method in interface nxopen.features.shipdesign.PlateBuilder
-
Removes a merge region point.
- removeMethod(PlcMethod) - Method in interface nxopen.ame.PlcBlock
-
Remove a method on the given block
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- removeMissingParentsFromEdgeBlend() - Method in interface nxopen.Part
-
Removes missing parent edges from all edge blend features in the part
License requirements: solid_modeling ("SOLIDS MODELING")
.
- RemoveMissingParentsFromEdgeBlendData() - Constructor for class nxopen.Part.RemoveMissingParentsFromEdgeBlendData
-
- removeModifyFeatureHandler(int) - Method in interface nxopen.weld.CustomManager
-
Unregisters the modify feature handler
License requirements: None.
- removeMovableObject(NXObject) - Method in interface nxopen.positioning.Network
-
Remove a movable object from the network.
- removeMultipleCurves(ICurve[], NXObject[], NXObject[], Section.Mode) - Method in interface nxopen.Section
-
- removeMultipleElements(ICurve[], NXObject[], NXObject[], boolean[], Point3d[], Point[], Section.Mode) - Method in interface nxopen.Section
-
Removes multiple section elements.
- removeMultiplePoints(Point[], Section.Mode) - Method in interface nxopen.Section
-
- removeNameAttribute() - Method in interface nxopen.cae.AttributeSelectionRecipe
-
Removes the name attribute.
- removeNavigatorObjectSelectedPlugin() - Method in interface nxopen.routing.CustomManager
-
Removes any registered navigator object selected plugin, except one configured in the Application View (APV) file.
- removeNewStopshortData(BlendStopshortBuilder) - Method in interface nxopen.features.EdgeBlendBuilder
-
Remove an edge blend stop short corresponding to a BlendStopshortBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
.
- removeNodeMap(FENode) - Method in interface nxopen.cae.MorphRevolvedMeshBuilder
-
Remove node from node to point mapping
License requirements: nx_masterfem ("Finite Element Modeling")
.
- removeNodes(FENode[]) - Method in interface nxopen.cae.CaeDOFSet
-
Remove nodes from the CaeDOFSet.
- removeNodes(int, NavigatorNode[]) - Method in interface nxopen.shipdesign.NavigatorCollection
-
Remove navigator nodes.
- removeNonIntersectedStructures() - Method in interface nxopen.features.shipdesign.PenetrationAssociationBuilder
-
Removes all nonintersected structures
License requirements: nx_penetration_mgmt ("Penetration Management")
.
- removeNonIntersectedStructures() - Method in interface nxopen.features.shipdesign.PenetrationCutoutBuilder
-
Removes all nonintersected structures
License requirements: nx_penetration_mgmt ("Penetration Management")
.
- removeNonIntersectedStructures() - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder
-
Removes all nonintersected structures
License requirements: nx_penetration_mgmt ("Penetration Management")
.
- removeNote(TaggedObject) - Method in interface nxopen.cae.NoteCollection
-
Deletes a CAE note or label
License requirements: nx_masterfem ("Finite Element Modeling")
.
- removeObject(NXObject) - Method in interface nxopen.annotations.IContainer
-
Removes an object in the container.
- removeObject(NXObject) - Method in interface nxopen.motion.MotionSolution
-
- removeObject(Tag, boolean, Tag) - Method in interface nxopen.uf.UFPlist
-
- removeObjectives(TBSSingleObjective[], boolean) - Method in interface nxopen.cae.optimization.TBSObjectives
-
Remove objectives
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
- removeObjects(CabinetComponentNode[]) - Method in interface nxopen.ame.CabinetNode
-
Removes cabinet component
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- removeObjects(TaggedObject[]) - Method in interface nxopen.features.WaveInterfaceLinkerBuilder
-
Remove unselected objects
License requirements: None.
- RemoveObjectsBuilder - Interface in nxopen.drawings
-
- removeObjectsFromDeleteList(TaggedObject[]) - Method in interface nxopen.Update
-
Removes objects from the global delete list.
- removeObjectsFromReferenceSet(NXObject[]) - Method in interface nxopen.ReferenceSet
-
Removal of objects from reference set
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- removeObjectType(String) - Method in interface nxopen.cae.DurSpecialistSimulationObjectTable
-
- removeOffset() - Method in interface nxopen.features.CurveFinderBuilder
-
Removes offset relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- removeOffset2dComponent() - Method in interface nxopen.features.CurveFinderBuilder
-
Removes offset 2d component relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- removeOffsetData() - Method in interface nxopen.IPlane
-
Remove all offset data from the plane
License requirements: None.
- removeOffsetSketchGroup() - Method in interface nxopen.features.CurveFinderBuilder
-
Removes offset sketch group relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- removeOldInstance(int) - Method in interface nxopen.tooling.AddReusablePart
-
Removes the instance from the part data
License requirements: None.
- removeOpenings() - Method in interface nxopen.features.shipdesign.PlateDivideBuilder
-
Returns the option to remove openings.
- removeOpenings() - Method in interface nxopen.features.shipdesign.ShipPreparationBuilder
-
Returns the option to remove openings.
- removeOpenings() - Method in interface nxopen.features.shipdesign.ShipPreparationInfo
-
Returns the option to remove openings.
- removeOperation(NXObject[]) - Method in interface nxopen.mechatronics.SystemObject
-
Removes operation object.
- removeOverriddenValue() - Method in interface nxopen.cam.CAMAttribute
-
Sets the overridden attribute value to undefined
License requirements: cam_base ("CAM BASE")
.
- removeOverrides() - Method in interface nxopen.cam.HoleMachiningBuilder
-
Removes overridden attributes of features in the feature geometry
License requirements: None.
- removeParallel() - Method in interface nxopen.features.CurveFinderBuilder
-
Removes parallel relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- removeParallel2dComponent() - Method in interface nxopen.features.CurveFinderBuilder
-
Removes parallel 2d component relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- removeParallelSketchGroup() - Method in interface nxopen.features.CurveFinderBuilder
-
Removes parallel sketch group relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- removeParameter(Feature) - Method in interface nxopen.features.UntrimBuilder
-
Removes parameters of feature.
- removeParameter() - Method in interface nxopen.tooling.CoolingDefineChannelBuilder
-
Returns the flag to indicate whether to remove parameters of the created solid or not
License requirements: None.
- removeParameter() - Method in interface nxopen.tooling.CoolingExtendBuilder
-
Returns the flag to indicate whether to remove parameters of the created solid or not
License requirements: None.
- removeParameter() - Method in interface nxopen.tooling.ReplaceSolidBuilder
-
Returns the option to remove parameter after feature creation.
- removeParameter() - Method in interface nxopen.tooling.TrimSolidBuilder
-
Returns the option to remove parameter of the trim solid body
License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- removeParameterOfBody(Body) - Method in interface nxopen.facet.PolygonModelingBuilder
-
Removes the parameters of the input body
License requirements: nx_polygon_modeling (" NX Polygon Modeling")
.
- removeParameters() - Method in interface nxopen.features.Feature
-
Remove Local feature parameters in history free mode.
- removeParameters(Point) - Method in interface nxopen.PointCollection
-
Removes the parameters from an associative
Point
.
- removeParameters() - Method in interface nxopen.SmartObject
-
Removes the smart object parameters.
- RemoveParametersBuilder - Interface in nxopen.features
-
- removePart(String) - Method in interface nxopen.features.shipdesign.PlatePreparationBuilder
-
Remove the part from the collection of parts to be unformed and scaled.
- removePart(String) - Method in interface nxopen.features.shipdesign.ShipFlatPatternBuilder
-
- removePartAttachment(IssueAttachment) - Method in interface nxopen.issue.IssueBriefcaseSynchronizeBuilder
-
- removePartClosedHandler(int) - Method in interface nxopen.PartCollection
-
Unregisters a user defined method that is called whenever a part is in the process of being closed
License requirements: None.
- removePartCreatedHandler(int) - Method in interface nxopen.PartCollection
-
Unregisters a user defined method that is called whenever a new part is created
License requirements: None.
- removePartModifiedHandler(int) - Method in interface nxopen.PartCollection
-
Unregisters a user defined method that is called whenever a part is modified
License requirements: None.
- removePartOpenedHandler(int) - Method in interface nxopen.PartCollection
-
Unregisters a user defined method that is called whenever a part is opened
License requirements: None.
- removePartRenamedHandler(int) - Method in interface nxopen.PartCollection
-
Unregisters a user defined method that is called whenever a part is renamed
License requirements: None.
- removePartSavedAsHandler(int) - Method in interface nxopen.PartCollection
-
Unregisters a user defined method that is called whenever a part is saved as a specified name
License requirements: None.
- removePartSavedHandler(int) - Method in interface nxopen.PartCollection
-
Unregisters a user defined method that is called whenever a part is saved
License requirements: None.
- removePassenger(BaseDataPassengerBuilder) - Method in interface nxopen.features.vehicledesign.BaseDataBuilder
-
- removePassword(Part) - Method in interface nxopen.PartCollection
-
- removePassword(Part, PartCollection.SetProtectionOn) - Method in interface nxopen.PartCollection
-
This method is for deleting security on part(s).
- removePathAssociativityFromParent() - Method in interface nxopen.routing.OffsetPath
-
Breaks the associativity of a child ( slave ) path to its parent ( master ) path.
- removePathAssociativityToImmediateChildren() - Method in interface nxopen.routing.OffsetPath
-
Breaks the associativity of a parent ( master ) path to
its immediate children ( slave ) paths.
- removePathInKit(String) - Method in interface nxopen.sim.ExportMachineKitBuilder
-
Removes the given file or directory in the machine kit.
- removePhysicsObjects(NXObject[]) - Method in interface nxopen.mechatronics.SystemObject
-
Removes behavioral physics objects.
- removePipeJointSetType(int) - Method in interface nxopen.weld.CustomManager
-
Unregisters the pipe joint set type handler
License requirements: None.
- removePipingComponentFilePlugin() - Method in interface nxopen.routing.CustomManager
-
Removes any registered piping component file plugin, except one configured in the Application View (APV) file.
- removePLCRelevantProduct() - Method in interface nxopen.ame.ProductSelectionBuilder
-
Returns the option to remove plc relevant product
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- removePlmXmlPostExportPlugin() - Method in interface nxopen.routing.CustomManager
-
Removes any registered post-export PLMXML plugin, except one configured in the Application View (APV) file.
- removePlmXmlPreImportPlugin() - Method in interface nxopen.routing.CustomManager
-
Removes any registered pre-import PLMXML plugin, except one configured in the Application View (APV) file.
- removePlmXmlRouteNodeNamePlugin() - Method in interface nxopen.routing.CustomManager
-
Removes any registered Route Node name plugin, except one configured in the Application View (APV) file.
- removePlmXmlRouteSectionNamePlugin() - Method in interface nxopen.routing.CustomManager
-
Removes any registered Route Section name plugin, except one configured in the Application View (APV) file.
- removePlugPort(Sheet) - Method in interface nxopen.ame.DiagramManager
-
Remove plug from object
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- removePmi(Annotation) - Method in interface nxopen.annotations.AnnotationManager
-
Remove PMI flag from annotation.
- removePocket() - Method in interface nxopen.tooling.PocketBuilder
-
The function to remove pocket
License requirements: None.
- removePoint(OnPathDimensionBuilder) - Method in interface nxopen.geometricutilities.AlignmentMethodBuilder
-
Remove given point, also remove corresponding points on other sections
License requirements: solid_modeling ("SOLIDS MODELING")
.
- removePoint(int) - Method in interface nxopen.motion.SplineBeamBuilder
-
Removes a point
License requirements: mechanisms ("MECHANISMS")
.
- removePointExitHandler(int) - Method in interface nxopen.weld.CustomManager
-
Unregisters the point feature handler
License requirements: None.
- removePointsAlignment() - Method in interface nxopen.features.MeshSurfaceBuilder
-
Remove points alignment information.
- removePole(NXObject, int, StudioXformBuilderEx.SurfaceDirectionType) - Method in interface nxopen.features.StudioXformBuilderEx
-
Inserts a pole in the selected xform object
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- removePort(Port) - Method in interface nxopen.routing.LogicalTerminal
-
Remove a physical
Port
from the
terminal.
- removePosition(PlcCodePosition) - Method in interface nxopen.ame.PlcBlock
-
Remove a rule position on the given block
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- removePositionOverride(Component) - Method in interface nxopen.assemblies.Component
-
Removes the highest level positioning override on component in or below
the given parent.
- removePostCommitCallback(int) - Method in interface nxopen.pdm.PartOperationImportObserver
-
Unregisters the user defined PostCommit callback
License requirements: None.
- removePostcopyoperationCallback(int) - Method in interface nxopen.pdm.SaveAsReviseObserver
-
Deregister the user defined postcopyoperation callback
License requirements: None.
- removePostureLib(String) - Method in interface nxopen.features.HumanBuilder
-
Remove posture library
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- removePreassembled(Tag, Tag) - Method in interface nxopen.uf.UFAssem
-
- removePreAutoassignCallback(int) - Method in interface nxopen.pdm.PartOperationImportObserver
-
Unregisters the user defined PreAutoAssign callback
License requirements: None.
- removePreCommitCallback(int) - Method in interface nxopen.pdm.PartOperationImportObserver
-
Unregisters the user defined PreCommit callback
License requirements: None.
- removePrecopyoperationCallback(int) - Method in interface nxopen.pdm.SaveAsReviseObserver
-
Deregister the user defined precopyoperation callback
License requirements: None.
- removePrerequisite(SimSolution) - Method in interface nxopen.cae.SimSolution
-
Remove a prerequisite to the solution
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- removeProblemVerticesOption() - Method in interface nxopen.features.OffsetSurfaceBuilder
-
Returns the option to remove problem vertices
License requirements: None.
- removeProduct() - Method in interface nxopen.ame.AMEEngObject
-
Removes the product selection from the device
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- removeProductAssemblyPart(String) - Method in interface nxopen.uf.UFUgmgr
-
- removeProductInterfaceObject() - Method in interface nxopen.assemblies.productinterface.InterfaceObject
-
Removes an object from the product interface set; currently supported types are expressions and geometry
License requirements: None.
- removeProductInterfaceObject(InterfaceObject) - Method in interface nxopen.assemblies.productinterface.ObjectBuilder
-
Removes an object from the product interface; currently supported types are expressions and geometry
License requirements: None.
- removeProfileString(int, int) - Method in interface nxopen.features.MeshSurfaceBuilder
-
Remove a string (string_index) from a profile (profile_index)
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- removeProjectFeatureCurves(Curve) - Method in interface nxopen.ConvertToFromReferenceBuilder
-
Removes all output entities belonging to the project feature that contains the input tag
from the input objects list of the command.
- removeProperty(CustomAttribute.Property) - Method in interface nxopen.features.CustomAttribute
-
The custom attribute remove property
License requirements: solid_modeling ("SOLIDS MODELING")
.
- removePropertyFromCondition(Condition) - Method in interface nxopen.visualreporting.VisualReportBuilder
-
Removes the current
Property
from this condition
without deleting it.
- removeRadialPivot(int) - Method in interface nxopen.formboard.ShapeSegmentBuilder
-
License requirements: routing_harness ("Routing Harness")
.
- removeRedundantVertices(NXObject[]) - Method in interface nxopen.Sketch
-
Remove redundant vertices of the given sketch geometry
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- removeReferenceFeature() - Method in interface nxopen.cam.InspectionPathBuilder
-
Remove the reference feature
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- removeRefSetMembers(Tag, int, Tag[]) - Method in interface nxopen.uf.UFAssem
-
- removeRegionPoint(Point3d) - Method in interface nxopen.features.shipdesign.PlateBuilder
-
Removes a region point.
- removeRelatedExpression(NXObject) - Method in interface nxopen.assemblies.productinterface.InterfaceObject
-
Removes related expression from the product interface object
License requirements: None.
- removeRelatedExpression(NXObject) - Method in interface nxopen.features.PartGeometryCopySelectBuilder
-
Removes the given related expression object
License requirements: None.
- removeRelatedInterfaceTerminal(InterfaceTerminalShadow) - Method in interface nxopen.routing.InterfaceTerminalRelationshipBase
-
- removeRelatedSingleDevice(SingleDevice) - Method in interface nxopen.routing.DeviceRelationship
-
- removeRememberedConstraints() - Method in interface nxopen.assemblies.Component
-
Remove all the remembered constraints stored on the part of this component.
- removeReportObjects(NXObject[]) - Method in interface nxopen.visualreporting.VisualReportExplorer
-
Remove objects from report.
- removeResultCategory(ResultCategory) - Method in interface nxopen.visualreporting.VisualReport
-
- removeReusableComponent(int) - Method in interface nxopen.tooling.AddReusablePart
-
Removes a reusable component
License requirements: None.
- removeRibbon(UFVariant) - Method in interface nxopen.uf.UFUi
-
- RemoveRibsBuilder - Interface in nxopen.cae
-
- removeRightRailing() - Method in interface nxopen.linedesigner.DBStairwayEquipmentNode
-
An API to remove right railing to stairway
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- removeRootNode() - Method in interface nxopen.shipdesign.NavigatorView
-
Removes root node.
- removeRow(Tag) - Method in interface nxopen.uf.UFTabnot
-
- removeRows(int, int) - Method in interface nxopen.diagramming.tables.TableBuilder
-
The method to remove the given number of rows starting with the given row index.
- removeRule() - Method in interface nxopen.ame.ReportsSettingsBuilder
-
Remove report rule
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- removeRule(String) - Method in interface nxopen.cam.FeatureTeaching
-
Removes a rule
License requirements: fbm_author ("FBM Author")
.
- removeRule() - Method in interface nxopen.cam.Teaching
-
Removes a rule
License requirements: fbm_author ("FBM Author")
.
- removeRule(int) - Method in interface nxopen.ScCollector
-
Remove collector rule
License requirements: None.
- removeRuleOnly(String) - Method in interface nxopen.RuleManager
-
Remove a dynamic child or attribute rule, but leave the geometry.
- removeRuleOnly(String, String) - Method in interface nxopen.uf.UFKf
-
- removeRules(String[]) - Method in interface nxopen.drawings.DrawingRegionRulesBuilder
-
Remove Rules
License requirements: nx_drawing_auto ("NX Drawing Automation")
.
- removeRules(FacetSelectionRule[]) - Method in interface nxopen.FacetCollector
-
Removes the input rules to collector and collector updates itself with new set of facets.
- removeRules(SelectionIntentRule[]) - Method in interface nxopen.ScCollector
-
Remove collector rules
License requirements: None.
- removeRules(SelectionIntentRule[], NXObject, NXObject, Section.Mode) - Method in interface nxopen.Section
-
Removes selection intent rules from the section.
- removeRules(ICurve, NXObject, NXObject, Section.Mode) - Method in interface nxopen.Section
-
Removes all the selection intent rules related to the section element.
- removeRuns(Run[]) - Method in interface nxopen.routing.RoutingSystem
-
Removes
Run
objects from a RoutingSystem.
- removeSearchedUnitAssociation(TaggedObject) - Method in interface nxopen.tooldesigner.SelectFixtureUnitsBuilder
-
RemoveSearchedUnitAssociation
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- removeSearchResultElementFromSelectedList(String) - Method in interface nxopen.assemblies.MechanicalRoutingSubsetBuilder
-
- removeSection(Section) - Method in interface nxopen.geometricutilities.AlignmentMethodBuilder
-
Find and delete the section
License requirements: solid_modeling ("SOLIDS MODELING")
.
- removeSection(Section) - Method in interface nxopen.SketchAssociativeTrimBuilder
-
The function removes the given section from the builder
License requirements: None.
- removeSection(Section) - Method in interface nxopen.SketchOffsetBuilder
-
The function removes the given section from the builder
License requirements: None.
- removeSectionAtIndex(int) - Method in interface nxopen.geometricutilities.AlignmentMethodBuilder
-
Remove section at given index
License requirements: solid_modeling ("SOLIDS MODELING")
.
- removeSectionData(int) - Method in interface nxopen.cae.ftk.SectionBasedMatrixRecord
-
Removes the data values of the specific section.
- removeSeedEdge(CAEEdge) - Method in interface nxopen.cae.EdgePathMethod
-
Remove seed (start vertex and edge) from the path.
- removeSeedEdge(FEElemEdge) - Method in interface nxopen.cae.ElemEdgePathMethod
-
Remove seed (start vertex and edge) from the path.
- removeSegFromStock(Tag, int, Tag[]) - Method in interface nxopen.uf.UFRoute
-
- removeSegmentBuilder(SegmentBuilder) - Method in interface nxopen.motion.RoadBuilder
-
Remove a segment
License requirements: mechanisms ("MECHANISMS")
.
- removeSegmentConstraint(int) - Method in interface nxopen.AutomaticTraceline
-
Removes the segment constraint from the traceline
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- removeSegments(Curve[]) - Method in interface nxopen.routing.Stock
-
Removes segments from this object.
- removeSelectedCurves() - Method in interface nxopen.features.shipdesign.PenetrationAssociationBuilder
-
Removes all selected curves
License requirements: nx_penetration_mgmt ("Penetration Management")
.
- removeSelectedHole() - Method in interface nxopen.tooling.FastenerAssy
-
Removes the selected hole from the fastener setup data
License requirements: None.
- removeSelectedMsetNode(TaggedObject) - Method in interface nxopen.tooling.ElectrodeInitializationBuilder
-
Remove a selected machine set node.
- removeSelectionIntent() - Method in interface nxopen.cam.GeometrySet
-
Break selection intent, and replace all the rules with single rules.
- removeSelfIntersection() - Method in interface nxopen.features.EdgeBlendBuilder
-
Returns the Remove self-intersection option
License requirements: None.
- removeSelfIntersections() - Method in interface nxopen.features.AOCSBuilder
-
Returns the remove self intersections flag .
- removeSelfIntersections() - Method in interface nxopen.features.FaceBlendBuilder
-
Returns the self-intersections option for face blend
License requirements: None.
- removeSelfIntersections() - Method in interface nxopen.preferences.SessionNXGateway
-
Returns the remove self intersection flag.
- removeSensorConfig(int) - Method in interface nxopen.cae.PreTestSensorConfigCollection
-
Removes and deletes a sensor selection configuration
License requirements: nx_correl_base ("FE Correlation")
.
- removeSequencingView(Tag) - Method in interface nxopen.uf.UFAssem
-
- removeSetbackData(int) - Method in interface nxopen.features.EdgeBlendBuilder
-
Remove an edge blend setback data for an edge in the edge blend
License requirements: solid_modeling ("SOLIDS MODELING")
.
- removeShell(int) - Method in interface nxopen.cam.Topology
-
Remove shell set
License requirements: cam_base ("CAM BASE")
.
- removeSignalAdapters(NXObject[]) - Method in interface nxopen.mechatronics.SystemObject
-
Removes signal adapter objects.
- removeSimEnd(int) - Method in interface nxopen.sim.IsvControlPanelBuilder
-
Unregisters the SimEnd callback.
- removeSimStop(int) - Method in interface nxopen.sim.IsvControlPanelBuilder
-
Unregisters the SimStop callback.
- removeSingleDeviceChild(SingleDevice) - Method in interface nxopen.routing.AssemblyDefinition
-
Removes a
SingleDevice
from the list of objects contained in the assembly.
- removeSingleSectionElement(ICurve, NXObject, NXObject, Section.Mode) - Method in interface nxopen.Section
-
Removes one section element curve.
- removeSingleSectionElement(Point, Section.Mode) - Method in interface nxopen.Section
-
Removes one section element that is a point.
- removeSlaves() - Method in interface nxopen.features.shipdesign.ProfileCutoutBuilder
-
Temporarily removes profile cutout slave features when editing profile cutout in ship basic design to prevent the downstream features from updating.
- removeSmallEdges() - Method in interface nxopen.preferences.SessionNXGateway
-
Returns the remove small edges flag.
- removeSortConnectionsPlugin() - Method in interface nxopen.routing.CustomManager
-
Removes any registered sort connections plugin.
- removeSpecificationChangedPlugin() - Method in interface nxopen.routing.CustomManager
-
Removes any registered discpline changed plugin.
- removeSpineAlignment() - Method in interface nxopen.features.MeshSurfaceBuilder
-
Remove spine alignment.
- removeSplinePoint(int) - Method in interface nxopen.formboard.ShapeSegmentBuilder
-
License requirements: routing_harness ("Routing Harness")
.
- RemoveSplitBuilder - Interface in nxopen.features.shipdesign
-
- removeStepSubNode(int) - Method in interface nxopen.blockstyler.Wizard
-
Remove a sub-node in the Task Navigator.
- removeStock(ElectricalStockDevice[]) - Method in interface nxopen.routing.electrical.ElectricalStockDeviceCollection
-
Removes
Stock
from input stock devices.
- removeStock(ISegment[]) - Method in interface nxopen.routing.StockCollection
-
Removes all stocks (excluding flexed stocks) from the input set of segments.
- removeStock(int, Tag[]) - Method in interface nxopen.uf.UFRoute
-
- removeStockComponentLockedPlugin() - Method in interface nxopen.routing.CustomManager
-
Removes any registered stock component locked plugin, except one configured in the Application View (APV) file.
- removeStopshortData(Edge, boolean) - Method in interface nxopen.features.EdgeBlendBuilder
-
- removeStopshortData(int) - Method in interface nxopen.features.EdgeBlendBuilder
-
- removeStopshortDataByType(Edge, boolean, BlendStopshortBuilder.Choices) - Method in interface nxopen.features.EdgeBlendBuilder
-
Remove the stop short from an edge, given its type and location
License requirements: solid_modeling ("SOLIDS MODELING")
.
- removeStringFromOcfData(Tag, UFCurve.OcfData) - Method in interface nxopen.uf.UFCurve
-
- removeStructuresByRule(Component[]) - Method in interface nxopen.features.shipdesign.SelectStructuresBuilder
-
Removes ship structures from the view
License requirements: nx_ship_drafting ("Ship Drafting")
.
- removeSubfolder(SimLbcFolder) - Method in interface nxopen.cae.SimLbcFolder
-
Remove a child folder
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- removeSupport(Support) - Method in interface nxopen.mfg.am.Part
-
Removes the support from the part
License requirements: am_pb_mtls_sg_2 ("Advanced NX Additive Support Geometry") OR am_pb_mtls_sg_1 ("Basic NX Additive Support Geometry")
.
- removeSuppressedGeom(CAMObject) - Method in interface nxopen.cam.CAMSetup
-
Remove suppressed geometry
License requirements: cam_base ("CAM BASE")
.
- removeSuppressedObject(NXObject) - Method in interface nxopen.motion.MotionSolution
-
Removes a suppressed object from a solution
License requirements: mechanisms ("MECHANISMS")
.
- removeSuppressedObject(NXObject, boolean) - Method in interface nxopen.motion.MotionSolution
-
Removes a suppressed object from a solution
Takes a flag that can be use to force ok to the dialog that could arise when conflict objects are found:
e.g. 2 active drivers on the same joint.
- removeSuppressedObjectForAllSolutions(Part, NXObject) - Method in interface nxopen.motion.MotionSimulation
-
Activates a motion object for all solutions
License requirements: mechanisms ("MECHANISMS")
.
- removeSymbol(String) - Method in interface nxopen.annotations.TextWithSymbolsBuilder
-
Removes specified symbol
License requirements: drafting ("DRAFTING")
.
- removeSymmetric(int) - Method in interface nxopen.features.CurveFinderBuilder
-
Removes symmetric relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- removeTaggedObjectsFromSelectionList(SelectionHandle, TaggedObject[], boolean) - Method in interface nxopen.Selection
-
Removes tagged objects from the selection list.
- removeTangency(AssignTangencyBuilder.TangencySide) - Method in interface nxopen.routing.AssignTangencyBuilder
-
Remove tangency at specified side of the spline.
- removeTangent() - Method in interface nxopen.features.CurveFinderBuilder
-
Removes tangent relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- removeTangent2dComponent() - Method in interface nxopen.features.CurveFinderBuilder
-
Removes tangent 2d component relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- removeTangentSketchGroup() - Method in interface nxopen.features.CurveFinderBuilder
-
Removes tangent sketch group relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- removeTaper(int) - Method in interface nxopen.features.EmbossSidewall
-
Sidewall got a list of EmbossTaper objects.
- removeTarget(Body) - Method in interface nxopen.features.TrimBodyBuilder
-
Removes a target body is removed from trim body in create.
- removeTarget(NXObject) - Method in interface nxopen.routing.RouteLogicalAssociation
-
Removes the target from Logical Assocition
License requirements: routing_harness ("Routing Harness")
.
- removeTargetBody(NXObject, NXObject) - Method in interface nxopen.tooling.ReusablePocketBuilder
-
Removes target body.
- removeTerminal(LogicalTerminal) - Method in interface nxopen.routing.electrical.ConnectorDevice
-
Remove a terminal.
- removeTerminalPorts(TerminalPort[]) - Method in interface nxopen.routing.MultiPort
-
- removeTerminalPorts(Tag, int, Tag[]) - Method in interface nxopen.uf.UFRoute
-
- removeTerminateCallback(int) - Method in interface nxopen.pdm.PartOperationImportObserver
-
Unregisters the user defined Terminate callback
License requirements: None.
- removeThruFaces(Tag) - Method in interface nxopen.uf.UFModeling
-
- removeTitleBlock() - Method in interface nxopen.diagramming.tables.Table
-
Remove the title block attached to the table.
- removeToolbar(UFVariant) - Method in interface nxopen.uf.UFUi
-
- removeToolComponent(NXObject) - Method in interface nxopen.tooling.ReusablePocketBuilder
-
Removes tool component.
- removeToTerminal(LogicalTerminal) - Method in interface nxopen.routing.LogicalConnection
-
- removeTraceLink(SystemObject) - Method in interface nxopen.mechatronics.SystemObject
-
Removes the trace link for system objects.
- removeTraceLinks(String[], String[], String[]) - Method in interface nxopen.pdm.RequirementUtils
-
Removes Trace Links between
Requirement
s and
Part
s
For the input requirement_item_numbers:
In case of Default Domain: it is Teamcenter item ID.
- removeTransformation() - Method in interface nxopen.cam.InspectionOperationTransformBuilder
-
Remove the tranformation
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- removeTransformation() - Method in interface nxopen.cam.OperationTransformBuilder
-
Remove the tranformation
License requirements: cam_base ("CAM BASE")
.
- removeTransience() - Method in interface nxopen.BasePart
-
Remove the transient status from the input part
License requirements: None.
- removeType(Part[]) - Method in interface nxopen.ame.ManageObjectTypeBuilder
-
Removes AD Type from input parts
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- RemoveUndercutsBuilder - Interface in nxopen.facet
-
This class handles the removal of undercut regions of a facet body.
- removeUnderlyingChain(Point3d, double, Section.Mode) - Method in interface nxopen.Section
-
Removes all the selection intent rules related to the chain on which the given point lies.
- removeUnderlyingCurve(Point3d, double, Section.Mode) - Method in interface nxopen.Section
-
Removes the single curve which is within tolerance to the given point, from the section.
- removeUnifyPathPlugin() - Method in interface nxopen.routing.CustomManager
-
Removes any registered unify path plugin, except one configured in the Application View (APV) file.
- removeUnitEffectivity(int, int) - Method in interface nxopen.EffectivityConditionBuilder
-
Removes specified existing range effectivity values from the builder.
- removeUnitEffectivity(int, EffectivityConditionBuilder.ToUnitType) - Method in interface nxopen.EffectivityConditionBuilder
-
- removeUnroutePlugin() - Method in interface nxopen.routing.CustomManager
-
Removes any registered unroute plugin, except one configured in the Application View (APV) file.
- removeUnusedStockData() - Method in interface nxopen.routing.StockDataCollection
-
- removeUpdateFailureAction(TaggedObject) - Method in interface nxopen.Update
-
Removes the update failure action for an object.
- removeUserAttributes(String) - Method in interface nxopen.cae.AttributeSelectionRecipe
-
Removes the user attribute with given name.
- removeUserInputs(CommandBuilder.UserInputLocation, UserInput[]) - Method in interface nxopen.report.CommandBuilder
-
Removes the user inputs.
- removeUtilityFunctionVisibilityHandler(int) - Method in interface nxopen.UI
-
Unregisters a user defined method that is called whenever an utility function state changes.
- removeValidateFormboardPlugin() - Method in interface nxopen.routing.CustomManager
-
Removes any registered validate formboard plugin, except one configured in the Application View (APV) file.
- removeValue() - Method in interface nxopen.cam.CAMAttribute
-
Sets the attribute value to undefined
License requirements: cam_base ("CAM BASE")
.
- removeVariableBevelHandler(int) - Method in interface nxopen.weld.CustomManager
-
Unregisters the variable bevel handler
License requirements: None.
- removeVariableRadiusData(Edge, double) - Method in interface nxopen.features.EdgeBlendBuilder
-
Remove variable radius data on an edge by the parameter value of the point on the edge
License requirements: solid_modeling ("SOLIDS MODELING")
.
- removeVariableRadiusData(Edge) - Method in interface nxopen.features.EdgeBlendBuilder
-
Remove all variable radius datas on an edge
License requirements: solid_modeling ("SOLIDS MODELING")
.
- removeVariableRadiusDataByIndex(Edge, int) - Method in interface nxopen.features.EdgeBlendBuilder
-
Remove variable radius data on an edge by the index into the point array on the edge
License requirements: solid_modeling ("SOLIDS MODELING")
.
- removeVariance(int, int) - Method in interface nxopen.geometricutilities.PatternDefinition
-
Removes variance from pattern definition instance
License requirements: None.
- removeVariantRule(String, String) - Method in interface nxopen.pdm.VariantConfigurationBuilder
-
Removes the given variant rule from
VariantConfigurationBuilder
if applicable
The input contextId comprising of multifield key and itemRev_id:
In case of default domain: contextId should contain Teamcenter item ID.
- removeVertexOnCurve() - Method in interface nxopen.features.CurveFinderBuilder
-
Removes vertex on curve relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- removeVertexOnCurve2dComponent() - Method in interface nxopen.features.CurveFinderBuilder
-
Removes vertex on curve 2d component relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- removeVertexOnCurveSketchGroup() - Method in interface nxopen.features.CurveFinderBuilder
-
Removes vertex on curve sketch group relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- removeViewDependency() - Method in interface nxopen.DisplayableObject
-
Remove dependency on all views from an object.
- removeViolationOverride() - Method in interface nxopen.routing.DesignRuleViolation
-
Removes violation override from given violation object.
- removeVirtualPorts(String[]) - Method in interface nxopen.routing.MultiPort
-
- removeVirtualPorts(Tag, int, String[]) - Method in interface nxopen.uf.UFRoute
-
- removeVncStatus(int) - Method in interface nxopen.sim.IsvControlPanelBuilder
-
Unregisters the VNC Status callback.
- removeWallFaces(NXObject[]) - Method in interface nxopen.cam.Splitter
-
Remove the wall faces
License requirements: cam_base ("CAM BASE")
.
- removeWeldJointHandler(int) - Method in interface nxopen.weld.CustomManager
-
Unregisters the welding joint handler
License requirements: None.
- removeWeldPoint() - Method in interface nxopen.weld.WeldPointBuilder
-
Remove the current selected point, need to set the current point prior to calling this method
License requirements: ugweld ("UG WELD")
.
- removeWorkPartChangedHandler(int) - Method in interface nxopen.PartCollection
-
Unregisters a method that is called whenever the work part changes.
- removeWrappedOverstockLengthCalculationPlugin() - Method in interface nxopen.routing.CustomManager
-
Removes any registered wrapped overstock length calculation plugin,
except one configured in the Application View (APV) file.
- removeYCurve(GraphBuilder.CurveData) - Method in interface nxopen.motion.GraphBuilder
-
- rename(MasterSymbol, String) - Method in interface nxopen.annotations.MasterSymbolBuilder
-
Renames symbol
License requirements: drafting ("DRAFTING")
.
- rename(String) - Method in interface nxopen.cae.aerostructures.MarginSolution
-
Renames the meta solution
License requirements: nx_masterfem ("Finite Element Modeling")
.
- rename(String) - Method in interface nxopen.cae.AlternateFemRepresentationSource
-
Set the name of the Alternate Fem Representation Source
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- rename(String) - Method in interface nxopen.cae.DurabilityEvent
-
Rename the event.
- rename(String) - Method in interface nxopen.cae.DurabilityExcitation
-
Rename the excitation.
- rename(String) - Method in interface nxopen.cae.DurabilityMetaSolution
-
Rename the metasolution.
- rename(String) - Method in interface nxopen.cae.DurSpecialistLoadProvider
-
Rename the LoadProvider
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- rename(String) - Method in interface nxopen.cae.DurSpecialistLocalDefinition
-
Rename the LocalDefinition.
- rename(String) - Method in interface nxopen.cae.DurSpecialistSolution
-
Rename the Solution.
- rename(String) - Method in interface nxopen.cae.LayoutState
-
- rename(String, boolean) - Method in interface nxopen.cae.optimization.TBSOptimizationSolution
-
Rename Solution and optionally rename associated results files
License requirements: None.
- rename(String, boolean) - Method in interface nxopen.cae.optimization.TBSSmooth
-
Rename smooth and optionally rename associated results files
License requirements: None.
- rename(String) - Method in interface nxopen.cae.ResultVariable
-
Re-Name Result Variable
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- rename(String, boolean) - Method in interface nxopen.cae.SimSolution
-
Rename Solution and optionally rename associated results files
License requirements: None.
- rename(Expression, String) - Method in interface nxopen.ExpressionCollection
-
Changes the name of the expression.
- rename(ExpressionGroup, String) - Method in interface nxopen.ExpressionGroupCollection
-
Changes the name of the expression group.
- RENAME - Static variable in class nxopen.features.EmbedManagerBuilder.TaskTypes
-
Rename the existing embedded file.
- rename(String) - Method in interface nxopen.fields.Field
-
Update the name of the field.
- rename(String, String, boolean) - Method in interface nxopen.gateway.BookmarkFile
-
Renames an existing bookmark file.
- rename(String, String) - Method in interface nxopen.layout2d.ComponentDefinition
-
Renames definition
License requirements: nx_layout ("NX Layout")
.
- rename(Layout2dDefinitionLocation, String, String) - Method in interface nxopen.layout2d.ComponentDefinitionCollection
-
Renames definition
License requirements: nx_layout ("NX Layout")
.
- rename(ModelProductionUnit, String) - Method in interface nxopen.linedesigner.UINodeUtils
-
To rename partition
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- RENAME - Static variable in class nxopen.pdm.PartOperationCreateBuilder.OperationSubType
-
Rename Existing Part
- rename(String, String) - Method in interface nxopen.RuleManager
-
Rename a dynamic child or attribute rule.
- reName() - Method in interface nxopen.tooling.BendInsertDesignBuilder
-
Returns the rename option.
- rename() - Method in interface nxopen.tooling.DieBaseBuilder
-
Returns the option whether rename the die base or not.
- rename() - Method in interface nxopen.tooling.ElectrodeBlankBuilder
-
Returns the option to use the part name management dialog box or not.
- rename() - Method in interface nxopen.tooling.ElectrodeComponentBuilder
-
Returns the option to use the part name management dialog box or not.
- rename() - Method in interface nxopen.tooling.ElectrodeCopyBuilder
-
Returns the new electrode name
License requirements: None.
- rename() - Method in interface nxopen.tooling.ElectrodeInitializationBuilder
-
Returns the component name can be defined in the part name management.
- rename() - Method in interface nxopen.tooling.InitProjectBuilder
-
Returns the rename dialog allows users to define rename rules
License requirements: None.
- rename() - Method in interface nxopen.tooling.MoldFillingBuilder
-
Returns a value that indicates whether the rename dialog should be activated when adding a fill component.
- rename() - Method in interface nxopen.tooling.MoldInsertBuilder
-
Returns the rename method
License requirements: None.
- rename() - Method in interface nxopen.tooling.MoldProcessBuilder
-
Returns the rename toggle let users choose whether to run Part Name Management dialog
License requirements: None.
- rename() - Method in interface nxopen.tooling.SubInsertBuilder
-
Returns the subinsert name
License requirements: None.
- RENAME - Static variable in class nxopen.tooling.ToolingClonemethod
-
Use part rename method
- RENAME - Static variable in class nxopen.uf.UFClone.NameRuleType
-
- rename(Tag, String) - Method in interface nxopen.uf.UFParam
-
- rename(Tag, String) - Method in interface nxopen.uf.UFPart
-
- rename(Tag, String) - Method in interface nxopen.uf.UFView
-
- RENAME_COMPOENT - Static variable in class nxopen.tooling.RenameAndExportComponentBuilder.Types
-
- RENAME_EXISTING - Static variable in class nxopen.cae.SimConditionSeqMgr.ImportNameCollisionsBehavior
-
- RENAME_FAILED - Static variable in class nxopen.uf.UFConstants
-
- RENAME_INCOMING - Static variable in class nxopen.cae.SimConditionSeqMgr.ImportNameCollisionsBehavior
-
- RENAME_PART_REASON - Static variable in class nxopen.uf.UF.CallbackReason
-
- RENAME_WITH_INDEX - Static variable in class nxopen.InterpartExpressionsBuilder.NamingRules
-
- RenameAndExportComponentBuilder - Interface in nxopen.tooling
-
Creates rename and export component builder for progressive die.
- RenameAndExportComponentBuilder.DefinitionType - Class in nxopen.tooling
-
definition type
- RenameAndExportComponentBuilder.LoadOptionType - Class in nxopen.tooling
-
load option type
- RenameAndExportComponentBuilder.NameRuleType - Class in nxopen.tooling
-
tooling naming rule
- RenameAndExportComponentBuilder.NamingRuleType - Class in nxopen.tooling
-
naming rule
- RenameAndExportComponentBuilder.Types - Class in nxopen.tooling
-
types
- renameArrangement() - Method in interface nxopen.tooling.ChangeoverManagementBuilder
-
Rename the selected changeover.
- renameChannel(String, String) - Method in interface nxopen.sim.KinematicConfigurator
-
Renames a channel name from the list
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- renameChannelName(String, String) - Method in interface nxopen.sim.KinematicComponentBuilder
-
Renames a channel name from the component
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- renameClass(String, String, String) - Method in interface nxopen.cam.Teaching
-
Renames a class
License requirements: fbm_author ("FBM Author")
.
- renameComponent(Component, String) - Method in interface nxopen.ame.ManageObjectTypeBuilder
-
Assigns new name to the input component
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- renameComponent() - Method in interface nxopen.tooling.BurringInsertBuilder
-
Returns the option whether rename component.
- renameComponent() - Method in interface nxopen.tooling.ChangeoverManagementBuilder
-
Returns the option to rename the components of the to-be-created changeover.
- renameComponent() - Method in interface nxopen.tooling.EjectorTableBuilder
-
Returns the option to define the part name in Part Name Management.
- renameComponent() - Method in interface nxopen.tooling.EWDraftingBuilder
-
Returns the option used to rename the part which is created.
- renameComponent() - Method in interface nxopen.tooling.FormingInsertBuilder
-
Returns the option whether rename component.
- renameComponent() - Method in interface nxopen.tooling.SpecialFormingBuilder
-
Returns the rename component
License requirements: None.
- renameComponent() - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder
-
Returns the rename component
License requirements: None.
- renameComponent() - Method in interface nxopen.tooling.SplitInsertBuilder
-
Returns the rename component
License requirements: None.
- renameComponentPartToggle() - Method in interface nxopen.tooling.MWDefineSheetsBuilder
-
Returns the toggle for invoking rename dialog for creating new component part
License requirements: None.
- renameComponents() - Method in interface nxopen.tooling.MotionSimulationBuilder
-
Returns the rename kinematic model components.
- renameComponents(NXObject, String, String) - Method in interface nxopen.tooling.RenameAndExportComponentBuilder
-
Rename components
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- renameComponents() - Method in interface nxopen.tooling.StandardPartBuilder
-
Returns the flag to indicate whether to bring up the Part Name Management dialog.
- renameDataset(Tag, String) - Method in interface nxopen.uf.UFClear
-
- renameDialog() - Method in interface nxopen.tooling.DieInsertBuilder
-
Returns the rename dialog option for normal pierce design.
- RenameDialogeBuilder - Interface in nxopen.linedesigner
-
To create a new instance of this class, use nxopen.linedesigner.LineDesignerManager#createRenameDialogeBuilder
Default values.
- RenameDialogeBuilder.SelectionTypeAPI - Class in nxopen.linedesigner
-
This enum is providing selection of occurence or iteme revision name for rename
- renameDiaTog() - Method in interface nxopen.tooling.InitProjBuilder
-
Returns the option to rename parts in project
License requirements: None.
- renameDrawing(Tag, String) - Method in interface nxopen.uf.UFDraw
-
- renameExp(String, String) - Method in interface nxopen.uf.UFModlGeneral
-
- renameFeatureType(String, String) - Method in interface nxopen.cam.FeatureTeaching
-
Renames a feature type
License requirements: fbm_author ("FBM Author")
.
- renameFile(String, String) - Method in interface nxopen.RemoteUtilities
-
Renames a file.
- renameFittingOverstockComponent(String) - Method in interface nxopen.routing.FittingOverstock
-
Renames the FittingOverstock component part with given name
License requirements: routing_base ("Routing Basic")
.
- renameFolder(NoteFolder, String) - Method in interface nxopen.cae.NoteManager
-
Rename specified folder
License requirements: nx_masterfem ("Finite Element Modeling")
.
- renameFunction(String, FunctionObject) - Method in interface nxopen.mechatronics.FunctionObjectCollection
-
Rename a
FunctionObject
object
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
Created in NX7.5.0
- renameHoldingSystem(String, String) - Method in interface nxopen.sim.KinematicComponentBuilder
-
Renames a holding system from the component
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- renameHoldingSystem(String, String) - Method in interface nxopen.sim.KinematicConfigurator
-
Renames a holding system from the list
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- renameInstance(String) - Method in interface nxopen.mechatronics.SystemObject
-
Renames system object instance.
- renameInstance(Tag, String) - Method in interface nxopen.uf.UFAssem
-
- RenameItemRevisionBuilder - Interface in nxopen.linedesigner
-
To create a new instance of this class, use nxopen.linedesigner.LineDesignerManager#createRenameItemRevisionBuilder
Created in NX10.0.3
- renameKitDirectory(String, String) - Method in interface nxopen.sim.ExportMachineKitBuilder
-
Rename a directory to the machine kit at the given directory.
- RenameLinkedPartModulePartBuilder - Interface in nxopen.geometricutilities
-
- renameOrder(Sketch, String, String) - Method in interface nxopen.drawings.OrderManager
-
Renames the order matching the specified name with the new name provided
License requirements: nx_layout ("NX Layout")
.
- renameParentNode(int, String) - Method in interface nxopen.tooling.FastenerAssy
-
Renames the parent node
License requirements: None.
- renamePartition(Partition, String) - Method in interface nxopen.linedesigner.UINodeUtils
-
To rename partition in new PLNAV
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- renameProductInterfaceObject(String) - Method in interface nxopen.assemblies.productinterface.InterfaceObject
-
Renames an object from the product interface set
License requirements: None.
- renameRecord(String, int, String) - Method in interface nxopen.cae.AfuManager
-
Rename an AFU Data Record
License requirements: None.
- renameRule(String, String) - Method in interface nxopen.cam.FeatureTeaching
-
Renames a rule
License requirements: fbm_author ("FBM Author")
.
- renameRule(String) - Method in interface nxopen.cam.Teaching
-
Renames a rule
License requirements: fbm_author ("FBM Author")
.
- renameRule() - Method in interface nxopen.tooling.MotionSimulationBuilder
-
- renameScenario(Tag, String, String) - Method in interface nxopen.uf.UFSf
-
- renameSimulation(NXObject, String, String) - Method in interface nxopen.motion.MotionSimulation
-
- renameStockComponent(String) - Method in interface nxopen.routing.Stock
-
Renames the stock component part with given name
License requirements: routing_base ("Routing Basic")
.
- renameSubmechanism(NXObject, String) - Method in interface nxopen.motion.MotionSimulation
-
Sets the custom name of the Submechanism object.
- renameTemplateFile(String, String) - Method in interface nxopen.cae.xyplot.BaseTemplateManager
-
Renames template file
License requirements: None.
- renameToggle() - Method in interface nxopen.tooling.ShimBuilder
-
Returns the toggle to indicate whether to rename shim part
License requirements: None.
- renameUserClass(String, String) - Method in interface nxopen.sim.KinematicComponentBuilder
-
Renames a user class from the component
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- renameUserClassification(String, String) - Method in interface nxopen.sim.KinematicConfigurator
-
Renames a user class name from the list
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- renameViewsInSplitScreenLayout(Layout, String, String) - Method in interface nxopen.LayoutCollection
-
Using given names renames the views in split screen layout.
- RENDER_WINDOW - Static variable in class nxopen.display.IRayPlusStudioEditorBuilder.IRayPlusStudioStaticImageSizeType
-
Ray Traced Studio window size used for static image output
- RENDER_WINDOW - Static variable in class nxopen.display.RayTracedStudioEditorBuilder.RayTracedStudioStaticImageSizeType
-
Ray Traced Studio window size used for static image output
- renderCount() - Method in interface nxopen.drawings.GeneralViewStyle
-
Returns the render count.
- renderingProperties() - Method in interface nxopen.diagramming.BulkEditBuilder
-
Returns the line rendering properties.
- renderingProperties() - Method in interface nxopen.pid.BulkEditBuilder
-
Returns the line rendering properties.
- RenderingPropertiesBuilder - Interface in nxopen.diagramming
-
Represents a RenderingPropertiesBuilder.
- renderingStyle() - Method in interface nxopen.drawings.ShadingViewStyle
-
Returns the rendering style.
- renderingStyle() - Method in interface nxopen.drawings.ViewSettingsBuilder
-
Returns the rendering style
License requirements: None.
- renderingStyle() - Method in interface nxopen.drawings.ViewStyleShadingBuilder
-
Returns the rendering style option on the SHADING tab of the View Style Dialog
License requirements: None.
- renderingStyle() - Method in interface nxopen.preferences.ShadingViewPreferences
-
Returns the rendering style.
- renderingStyle - Variable in class nxopen.preferences.ViewVisualizationVisual.DisplayAppearanceOptions
-
Rendering style for geometry.
- renderingStyle - Variable in class nxopen.preferences.ViewVisualizationVisual.SurfaceDisplayOptions
-
Deprecated.
Rendering style for geometry.
- renderingStyle - Variable in class nxopen.uf.UFView.AskSurfaceDisplayOptionsData
-
- renderingStyle() - Method in interface nxopen.View
-
Returns the rendering style of the view.
- renderMethodType() - Method in interface nxopen.display.TrueStudioBuilder
-
Returns the Render Method Type is used in Advanced Studio display to control the display quality and performance
License requirements: None.
- RenderPrefs() - Constructor for class nxopen.uf.UFDraw.RenderPrefs
-
- RenderPrefs(UFDraw.HiddenLine, int, int, int, UFDraw.EdgeHidingEdge, int, int, int, boolean, boolean) - Constructor for class nxopen.uf.UFDraw.RenderPrefs
-
- RenderSet - Interface in nxopen.drawings
-
Represents a RenderSet.
- renderSets - Variable in class nxopen.uf.UFDraw.AskRenderSetsData
-
- renderSets - Variable in class nxopen.uf.UFDraw.AskRenderSetsOfViewData
-
- renderSolidsUsingStoredFacets() - Method in interface nxopen.preferences.SessionVisualizationPerformance
-
Returns the rendering of solids using stored facets during interactive mode.
- renderTrueHiddenLine() - Method in interface nxopen.drawings.CustomViewSettingsBuilder
-
Returns the render true hidden line
License requirements: None.
- renderTrueHiddenLine() - Method in interface nxopen.drawings.ThreadsViewStyle
-
Returns the status of render true hidden line
License requirements: None.
- renderTrueHiddenLine() - Method in interface nxopen.preferences.ThreadsViewPreferences
-
Returns the status of render true hidden line
License requirements: None.
- renew() - Method in interface nxopen.positioning.Constraint
-
Changes the constraint to solve with the latest version of the constraint code.
- RenewFeatureBuilder - Interface in nxopen.geometricutilities
-
Represents a RenewFeatureBuilder object.
- RENKA_SHEPARD2D - Static variable in class nxopen.fields.FieldEvaluator.InterpolationEnum
-
Refined inverse distance weighting in 2D space
- RENKA_SHEPARD2D - Static variable in class nxopen.fields.FieldTable.InterpolationEnum
-
Deprecated.
Refined inverse distance weighting in 2D space
- RENKA_SHEPARD3D - Static variable in class nxopen.fields.FieldEvaluator.InterpolationEnum
-
Refined inverse distance weighting in 3D space
- RENKA_SHEPARD3D - Static variable in class nxopen.fields.FieldTable.InterpolationEnum
-
Deprecated.
Refined inverse distance weighting in 3D space
- RENKA_SHEPARD_ND - Static variable in class nxopen.fields.FieldEvaluator.InterpolationEnum
-
Refined inverse distance weighting in N dimensional space
- RENKA_SHEPARD_ND - Static variable in class nxopen.fields.FieldTable.InterpolationEnum
-
Deprecated.
Refined inverse distance weighting in N dimensional space
- RENUMBER - Static variable in class nxopen.cae.BcLabelManagerBuilder.RenumberType
-
All the selected BC ID will be renumbered strarting from this number
- renumberMethod() - Method in interface nxopen.cae.BcLabelManagerBuilder
-
Returns a value indicating renumber method
License requirements: None.
- renumberStartValue() - Method in interface nxopen.cae.BcLabelManagerBuilder
-
Returns a value indicating the number to offset by or renumber from
License requirements: None.
- reopen(BasePart.CloseWholeTree, BasePart.CloseModified, PartCloseResponses) - Method in interface nxopen.BasePart
-
Reopens a loaded part.
- reopen(Tag, int, int) - Method in interface nxopen.uf.UFPart
-
- REOPEN - Static variable in class nxopen.uistyler.FileOperationData.FileOperationType
-
Reopen file operation
- reopenAll(BasePart.CloseModified, PartCloseResponses) - Method in interface nxopen.PartCollection
-
Reopens all modified parts in the session.
- reopenAs(String, BasePart.CloseModified, PartCloseResponses) - Method in interface nxopen.BasePart
-
Reopens a loaded part.
- ReopenData() - Constructor for class nxopen.BasePart.ReopenData
-
- reopenReport - Variable in class nxopen.BasePart.ReopenData
-
Report
containing results of reopen command
- reorder(Sketch, Component[]) - Method in interface nxopen.drawings.OrderManager
-
Updates the current order based on the provided list of 2D components if the order is user-defined, and creates a new order otherwide
License requirements: nx_layout ("NX Layout")
.
- REORDER_SEL_LIST - Static variable in class nxopen.options.OptionType
-
Option value is a list which can be selected and re-ordered
- reorderAfterEdgeNode(NXObject, int, int) - Method in interface nxopen.weld.ConnectionFinderBuilder
-
Reorders a selected edge by putting it after the specified edge.
- reorderAfterFaceNode(NXObject, int, int) - Method in interface nxopen.weld.ConnectionFinderBuilder
-
Reorders a selected face by putting it after the specified face.
- reorderBeforeEdgeNode(NXObject, int, int) - Method in interface nxopen.weld.ConnectionFinderBuilder
-
Reorders a selected edge by putting it before the specified edge.
- reorderBeforeFaceNode(NXObject, int, int) - Method in interface nxopen.weld.ConnectionFinderBuilder
-
Reorders a selected face by putting it before the specified face.
- ReorderBlends - Interface in nxopen.features
-
Represents a reorder blends feature
To create or edit an instance of this class, use
ReorderBlendsBuilder
Created in NX7.5.1
- ReorderBlendsBuilder - Interface in nxopen.features
-
- reorderCallback(SetList, UIBlock, int, int) - Method in interface nxopen.blockstyler.SetList.ReorderCallback
-
Reorder callback
License requirements: None.
- reorderChildrenOfParent(ComponentOrder, Component, Component[]) - Method in interface nxopen.assemblies.ComponentAssembly
-
- reorderComponents(ComponentOrder, Component[], Component, ComponentAssembly.OrderTargetLocation) - Method in interface nxopen.assemblies.ComponentAssembly
-
- reorderFeature(Feature[], Feature, FeatureCollection.ReorderType) - Method in interface nxopen.features.FeatureCollection
-
Reorders the Feature with respect to the given feature
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- reorderFeature() - Method in interface nxopen.routing.Port
-
Reorders the
FeaturePort
object associated with
Port
after all of the features on which the
port feature depends.
- reorderFeature(Tag, Tag[], int) - Method in interface nxopen.uf.UFModeling
-
- reorderFeatures(FeatureGeometry.SortOrder) - Method in interface nxopen.cam.fbm.FeatureGeometry
-
Reorders the features according to a predefined algorithm
License requirements: cam_base ("CAM BASE")
.
- reorderFeaturesByDirection(FeatureGeometry.SequenceDirectionType, FeatureGeometry.SequencePatternType, Vector3d) - Method in interface nxopen.cam.fbm.FeatureGeometry
-
Reorders the features according to primary direction
License requirements: cam_base ("CAM BASE")
.
- reorderFeaturesByDirection(FeatureGeometry.SequenceDirectionType, FeatureGeometry.SequencePatternType, Vector3d, double) - Method in interface nxopen.cam.fbm.FeatureGeometry
-
Reorders the features according to primary direction with band width
License requirements: cam_base ("CAM BASE")
.
- reorderInstanceDefinition(InstanceDefinition, InstanceDefinition) - Method in interface nxopen.partfamily.TemplateManager
-
Reorder (relocate) familyMemberDefinition just after the previousFamilyMemberDefn
License requirements: solid_modeling ("SOLIDS MODELING")
.
- reorderList() - Method in interface nxopen.cam.HoleBossGeom
-
Reverses the direction of the feature
License requirements: None.
- reorderObject(SystemObject, SystemObject.ReorderType) - Method in interface nxopen.mechatronics.SystemObject
-
Reorders system objects.
- reorderParameters(HoleCalloutSettingsBuilder.Featuretype, HoleCalloutSettingsBuilder.Parametertype[]) - Method in interface nxopen.annotations.HoleCalloutSettingsBuilder
-
Reorder the parameters based on the input.
- reorderProfileStringCurves(int, Curve) - Method in interface nxopen.features.MeshSurfaceBuilder
-
Reorder profile string curves.
- ReorderSelectableStringListValueData() - Constructor for class nxopen.options.OptionsManager.ReorderSelectableStringListValueData
-
- reorganizeFeature(Feature[], Feature, FeatureCollection.ReorderType) - Method in interface nxopen.features.FeatureCollection
-
Reorganizes the Feature with respect to the given feature across the part module
License requirements: usr_defined_features ("USER DEFINED FEATURES")
.
- reorientByCoordinateSystem(Matrix3x3) - Method in interface nxopen.geometricutilities.TransformerData
-
Reorient the tool by aligning it to a coordinate system.
- reorientByDirection(TransformerData.ObjectType, Vector3d) - Method in interface nxopen.geometricutilities.TransformerData
-
Reorient the tool by changing its axis direction.
- reorientLeftHandedElements() - Method in interface nxopen.cae.modelcheck.SolidElementFaceNormalBuilder
-
- reorientProperties() - Method in interface nxopen.tooling.DieEngLineupBuilder
-
Returns the reorient properties
License requirements: die_engineering ("DIE ENGINEERING")
.
- reorientToolHolder() - Method in interface nxopen.cam.TurningOperationBuilder
-
- reorientToolHolder() - Method in interface nxopen.cam.TurnToolProbingBuilder
-
Returns the Reorient Tool Holder toggle
License requirements: None.
- reorientToolHolderMode() - Method in interface nxopen.cam.TurningOperationBuilder
-
Returns the Reorient Tool Holder Mode
License requirements: None.
- REPAIR - Static variable in class nxopen.facet.CleanupFacetBodyBuilder.CleanupOptions
-
Perform Repair
- repairingOption() - Method in interface nxopen.features.DraftBodyBuilder
-
- repairPartingEdge() - Method in interface nxopen.features.DraftBodyBuilder
-
Returns the repairing parting edge
License requirements: None.
- repairRadius() - Method in interface nxopen.features.DraftBodyBuilder
-
- repairTolerance() - Method in interface nxopen.preferences.SessionNXGateway
-
Returns the repair tolerance.
- REPARAMETRIZATION - Static variable in class nxopen.cam.CAMObject.Attr
-
- reparentBranch(Run, OrderedElementGroup) - Method in interface nxopen.plas.Run
-
Moves branch from one run to another. the original branch will be destroyed
License requirements: None.
- ReparentComponentBuilder - Interface in nxopen.layout2d
-
Represents a Builder for Reparent 2D Component functionality which will reparents
the selected 2D Component contents from another 2D Component definition.
- reparentFrecsReferencingSeamedObject() - Method in interface nxopen.features.shipdesign.SeamBuilder
-
Returns the flag to indicate if re-parent of inter-part profile cutout features which reference curves modified by Seam.
- reparentNode(int, NavigatorNode, NavigatorNode) - Method in interface nxopen.shipdesign.NavigatorCollection
-
Reparent navigator node.
- reparentNodes(int, NavigatorNode, NavigatorNode[]) - Method in interface nxopen.shipdesign.NavigatorCollection
-
Reparent navigator nodes.
- reparentSimulation(String, String) - Method in interface nxopen.motion.MotionSession
-
- REPEAT - Static variable in class nxopen.cae.LaminatePlyGroup.Link
-
same ply layup
- repeatCounts - Variable in class nxopen.uf.UFWeight.Exceptions
-
- REPEATED - Static variable in class nxopen.cae.LaminateGlobalLayup.StackingRecipeType
-
Repeated
- REPEATED_WITH_CORE - Static variable in class nxopen.cae.LaminateGlobalLayup.StackingRecipeType
-
Repeated with core
- repeatTransformSetting() - Method in interface nxopen.geometricutilities.PatternOrientation
-
Returns the repeatTransformSetting, a logical flag to indicate if the we need to repeatedly apply the transform.
- repetition() - Method in interface nxopen.drawings.BrokenViewBuilder
-
Returns the repetition of the break line pattern
License requirements: None.
- repFeatureList - Variable in class nxopen.uf.UFFbmGeom.AskRepresentativeFeaturesData
-
- REPLACE - Static variable in class nxopen.ame.PlcRule.ReplacementType
-
- REPLACE - Static variable in class nxopen.cam.CutterExport.SaveFlags
-
Replace the one exist in tool library
- replace() - Method in interface nxopen.dmu.ISnapshot
-
Replaces a
ISnapshot
object with current state of model.
- REPLACE - Static variable in class nxopen.ExpressionCollection.ImportMode
-
Overwrite existing expressions if the imported values differ
- replace(String, String) - Method in interface nxopen.ExpressionCollection
-
Replaces references to an expression with another expression.
- REPLACE - Static variable in class nxopen.features.EmbedManagerBuilder.TaskTypes
-
Replace the existing embedded file.
- REPLACE - Static variable in class nxopen.features.ReplaceFaceBuilder.ReplaceTypes
-
This stands for replace type - to replace the surface of the target face with the tool face
- REPLACE - Static variable in class nxopen.fields.FieldTable.LoadFileOption
-
Replace data removing duplicates
- REPLACE - Static variable in class nxopen.geometricutilities.AlongSpineBuilder.RetainSpineOption
-
Deletes the old profile, so that user has to select new one during edit of pre NX3 parms
- REPLACE - Static variable in class nxopen.geometricutilities.CurveOptions.InputCurve
-
Replaces the original input curve with the new output curve
- REPLACE - Static variable in class nxopen.geometricutilities.LawBuilder.RetainLawCurveOption
-
Deletes the old profile, so that user has to select new one during edit pre NX3 parms
- REPLACE - Static variable in class nxopen.InterpartExpressionsBuilder.NamingRules
-
- REPLACE - Static variable in class nxopen.mechatronics.CamBuilder.AddCamDiskToMasterOption
-
Replace
- REPLACE - Static variable in class nxopen.report.CommandImporter.OverrideOption
-
Import to replace the existing one
- REPLACE - Static variable in class nxopen.uf.UFClone.Action
-
- replace(String, NXObject[]) - Method in interface nxopen.Validation
-
Replace objects of a key in the validation map
License requirements: None.
- REPLACE - Static variable in class nxopen.visualreporting.VisualReportExplorer.ReportOnObjectsOption
-
Replace the existing set of objects
- REPLACE_EXISTING - Static variable in class nxopen.DisplayPartOption
-
Replace the existing active display part with the new one
- REPLACE_FF_STRING_ERROR - Static variable in class nxopen.uf.UFConstants
-
- REPLACE_NODE - Static variable in class nxopen.cae.ElementConnectivityBuilder.Methods
-
Replace a node of an element by another one
- REPLACE_PART - Static variable in class nxopen.routing.CustomManager.CallbackReason
-
Called after the Replace Part command.
- REPLACE_STOCK - Static variable in class nxopen.routing.CustomManager.CallbackReason
-
Called after the Replace Stock command.
- REPLACE_STRING - Static variable in class nxopen.tooling.RenameAndExportComponentBuilder.NamingRuleType
-
- REPLACE_STRING - Static variable in class nxopen.uf.UFClone.NameRuleType
-
- replaceAll() - Method in interface nxopen.annotations.ReplaceSymbolBuilder
-
Returns the flag indicating whether to replace all instances of selected symbols
License requirements: None.
- replaceAll() - Method in interface nxopen.layout2d.ReplaceComponentBuilder
-
Returns the flag indicating whether to replace all instances of selected components
License requirements: None.
- replaceAllComponents() - Method in interface nxopen.pdm.PartOperationBuilder
-
- replaceAllComponentsInSession() - Method in interface nxopen.pdm.PartOperationCopyBuilder
-
Returns the replace all components.
- replaceAllOccurrences() - Method in interface nxopen.assemblies.ReplaceComponentBuilder
-
Returns the replace all occurrences
License requirements: None.
- replaceAttributeExpression(Expression, NXObject, String, NXObject.AttributeType, int) - Method in interface nxopen.ExpressionCollection
-
Replace the attribute expression of the specified attribute title/type.
- ReplaceBlend - Interface in nxopen.features
-
Represents a replace blend feature
To create or edit an instance of this class, use
ReplaceBlendBuilder
Created in NX7.0.0
- ReplaceBlendBuilder - Interface in nxopen.features
-
Represents a builder for a Replace Blend feature.
- replaceBodyData(Tag, Tag) - Method in interface nxopen.uf.UFModeling
-
- replaceBooleanBody(Tag, UFModl.BooleanBody, Tag) - Method in interface nxopen.uf.UFModeling
-
- replaceChannel() - Method in interface nxopen.sim.KinematicImportMcfBuilder
-
Returns the flag which determines if the channel data of the Machine Tool Builder are
deleted befor they are replaced through the Channel data of the MCF-File
License requirements: None.
- replaceComponent(NXObject, String) - Method in interface nxopen.tooling.RenameAndExportComponentBuilder
-
Replace components
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- ReplaceComponentBuilder - Interface in nxopen.assemblies
-
- ReplaceComponentBuilder - Interface in nxopen.layout2d
-
Represents a Builder for Replace 2D Component functionality which will replaces
the selected 2D Component contents from another 2D Component definition.
- ReplaceComponentBuilder.ComponentLayerOption - Class in nxopen.assemblies
-
Represents possible layer option for replacement part
- ReplaceComponentBuilder.ComponentNameOption - Class in nxopen.assemblies
-
Represents possible component name option for replace operation
- ReplaceComponentBuilder.ComponentReferenceSet - Class in nxopen.assemblies
-
Represents possible reference set for replacement part
- ReplaceComponentBuilder.ComponentReferenceSetTypeData - Class in nxopen.assemblies
-
- replaceComponents(Component, Component, String) - Method in interface nxopen.routing.RouteManager
-
Replaces old component with new component, and relinks ports if possible.
- replaceComponents(Component, Component, String, RouteManager.FixPosition) - Method in interface nxopen.routing.RouteManager
-
Replaces old component with new component, and relinks ports if possible.
- replaceConstraintCurve(Curve) - Method in interface nxopen.die.AddendumSectionBuilder
-
Replaces the constraint curve with an edited curve.
- replaceContentDefinition(ContentDefinition) - Method in interface nxopen.assemblies.Subset
-
- REPLACED - Static variable in class nxopen.weld.AutoPointBuilder.InterferenceDetails
-
Indicates weld points exist and part names have changed.
- replaceExpression(Expression) - Method in interface nxopen.IPlane
-
Replace the expression in on curve plane plane
License requirements: None.
- ReplaceExpressionsBuilder - Interface in nxopen
-
This class creates Replace expressions from the source part to the current work part via the naming rule defined.
- ReplaceFace - Interface in nxopen.features
-
Represents a replace face feature , don't use it until nx502
To create or edit an instance of this class, use
ReplaceFaceBuilder
Created in NX5.0.2
- ReplaceFaceBuilder - Interface in nxopen.features
-
Represents a builder for a replace face feature, don't use it until nx502.
- ReplaceFaceBuilder.ReplaceTypes - Class in nxopen.features
-
Enumeration of replace face type, don't use it until nx502 .
- replaceFaces() - Method in interface nxopen.features.ReplaceFaceBuilder
-
Returns the target faces to replace
License requirements: None.
- replaceFeatStrings(Tag, int, UFModl.StringList, int, int) - Method in interface nxopen.uf.UFModeling
-
- ReplaceFeatureBuilder - Interface in nxopen.features
-
Represents a replace feature builder.
- ReplaceFeatureBuilder.MappingMethodType - Class in nxopen.features
-
Type of mapping method to be used for replace feature
- replaceFeatures(Tag[], int, Tag[], int, boolean, boolean, UFModl.ReplaceFeatures[], int) - Method in interface nxopen.uf.UFModeling
-
- ReplaceFeatures() - Constructor for class nxopen.uf.UFModl.ReplaceFeatures
-
- ReplaceFeatures(Tag, Tag) - Constructor for class nxopen.uf.UFModl.ReplaceFeatures
-
- ReplaceFeaturesData() - Constructor for class nxopen.uf.UFModeling.ReplaceFeaturesData
-
- replaceFileBrowser() - Method in interface nxopen.features.EmbedManagerBuilder
-
Returns the file browser to replace an embedded file into the part.
- replaceFont(int, FontCollection.Type, String) - Method in interface nxopen.FontCollection
-
Replaces a font name and type at the given font index
License requirements: None.
- replaceFont(Tag, int, String) - Method in interface nxopen.uf.UFUgfont
-
- replaceFont1(Tag, int, UFUgfont.Type, String) - Method in interface nxopen.uf.UFUgfont
-
- replaceFromTerminals(LogicalTerminal[]) - Method in interface nxopen.routing.LogicalConnection
-
Replace the existing From Terminals for the logical connection with
collection of
LogicalTerminal
terminals
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
Created in NX4.0.2
- replaceIntermediateTerminals(LogicalTerminal[]) - Method in interface nxopen.routing.electrical.Connection
-
Replaces the intermediate terminals associated with this connection.
- replaceLoadedInstance(TaggedObject) - Method in interface nxopen.routing.PlacePartBuilder
-
Replace the builder's part instance with a new instance.
- replaceMachine(String, int, UFLib.NcmctSetupReplaceMode) - Method in interface nxopen.uf.UFMct
-
- replaceMaterialAssignment(PhysicalMaterial) - Method in interface nxopen.PhysicalMaterial
-
Replaces all assignments of one material with another material in the part where the material is assigned.
- replacementAssistant() - Method in interface nxopen.features.ExtractFaceBuilder
-
Returns the Replacement Assistant builder.
- replacementAssistant() - Method in interface nxopen.features.MirrorBodyBuilder
-
Returns the Replacement Assistant builder.
- replacementEntity - Variable in class nxopen.uf.UFModl.ReplaceFeatures
-
- replacementFace() - Method in interface nxopen.features.ReplaceFaceBuilder
-
Returns the replacement face, only for replace type, don't use it until nx502
License requirements: None.
- replacementFaces() - Method in interface nxopen.features.ReplaceFaceBuilder
-
Returns the replacement faces
License requirements: None.
- replacementFeature() - Method in interface nxopen.features.ReplaceFeatureBuilder
-
Returns the selection list of replacement features
License requirements: None.
- replacementPart() - Method in interface nxopen.assemblies.ReplaceComponentBuilder
-
Returns the replacement part.
- replaceNativeFileBrowser() - Method in interface nxopen.features.EmbedManagerBuilder
-
Returns the native OS file browser to replace an embedded file into the part.
- replaceNodeMap(FENode, FENode, Point) - Method in interface nxopen.cae.MorphRevolvedMeshBuilder
-
Replace old node mapping with new node to point mapping
License requirements: nx_masterfem ("Finite Element Modeling")
.
- replaceObjectArrayData(int, Tag[], Tag[]) - Method in interface nxopen.uf.UFObj
-
- replaceObjectData(Tag, Tag) - Method in interface nxopen.uf.UFObj
-
- replaceOverstockApplication(CharacteristicList, Overstock) - Method in interface nxopen.routing.OverstockApplicationCollection
-
Replace current selected overstock
Overstock
with
the chosen overstock.
- replaceParameters(SmartObject) - Method in interface nxopen.SmartObject
-
Edit a smart object by replacing its parameters using parameters of
other smart object of the same class.
- replaceParms(Tag, Tag) - Method in interface nxopen.uf.UFSo
-
- ReplacePhysicsBuilder - Interface in nxopen.mechatronics
-
- replaceReferenceSet(Component, String) - Method in interface nxopen.assemblies.ComponentAssembly
-
Replaces the reference set used by a component.
- replaceReferenceSetInOwners(String, Component[]) - Method in interface nxopen.assemblies.ComponentAssembly
-
Sets the reference set used to represent each component in an array.
- replaceRefset(int, Tag[], String) - Method in interface nxopen.uf.UFAssem
-
- replaceRelatedInterfaceTerminals(InterfaceTerminalShadow[]) - Method in interface nxopen.routing.InterfaceTerminalRelationshipBase
-
- replaceRelatedSingleDevices(SingleDevice[]) - Method in interface nxopen.routing.DeviceRelationship
-
- replaceReusableComponent() - Method in interface nxopen.tooling.AddReusablePart
-
Replace reusable component
License requirements: None.
- replaceRhsInterpartExpression(Expression, Expression) - Method in interface nxopen.ExpressionCollection
-
Replaces the old right hand side interpart expression references with those of the
new right hand side interpart expression.
- replaceRules(SelectionIntentRule[], boolean) - Method in interface nxopen.features.FaceRecognitionBuilder
-
Replace collector rules.
- replaceRules(SelectionIntentRule[], boolean) - Method in interface nxopen.ScCollector
-
Replace collector rules.
- replaceRules(SelectionIntentRule[], DisplayableObject[], boolean) - Method in interface nxopen.ScCollector
-
Replace collector rules and specify negated entities.
- replaceSectionCurve(Curve) - Method in interface nxopen.die.AddendumSectionBuilder
-
Replaces the current section with the edited one.
- replaceSingleDeviceChildren(SingleDevice[]) - Method in interface nxopen.routing.AssemblyDefinition
-
Replaces the list of
SingleDevice
objects contained in the assembly.
- replaceSolid() - Method in interface nxopen.tooling.ToolingManager
-
Returns the ReplaceSolidCollection instance belonging to this part .
- ReplaceSolidBuilder - Interface in nxopen.tooling
-
Represents a replace solid operation.
- ReplaceSolidCollection - Interface in nxopen.tooling
-
Creates ReplaceSolidBuilder collection
To obtain an instance of this class, refer to
ToolingManager
Created in NX8.0.0
- replaceString() - Method in interface nxopen.InterpartExpressionsBuilder
-
Returns the replace string.
- replaceString() - Method in interface nxopen.ReplaceExpressionsBuilder
-
Returns the replace string.
- replaceSweepStrings(Tag, int, Tag[], int, Tag[], int, Tag[], int, Tag[]) - Method in interface nxopen.uf.UFModl
-
- replaceSymbol(String, String, boolean) - Method in interface nxopen.annotations.BaseCustomSymbol
-
Replace custom symbol with the given master symbol name and path.
- ReplaceSymbolBuilder - Interface in nxopen.annotations
-
- replaceToTerminals(LogicalTerminal[]) - Method in interface nxopen.routing.LogicalConnection
-
Replace the existing To Terminals for the logical connection with
collection of
LogicalTerminal
terminals
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
Created in NX4.0.2
- replaceView(ModelingView, int, int, boolean) - Method in interface nxopen.Layout
-
Replaces a
ModelingView
with another one at a specified position.
- replaceView(ModelingView, ModelingView, boolean) - Method in interface nxopen.Layout
-
- replaceWith() - Method in interface nxopen.sim.SinumerikCaSimplifyBodiesBuilder
-
Returns the object to replace with
License requirements: None.
- replaceWithIndependentSketch(Feature[]) - Method in interface nxopen.features.FeatureCollection
-
Replace the given features with Independent Sketch
License requirements: None.
- replaceWithStr() - Method in interface nxopen.pdm.PartOperationImportBuilder
-
Returns the replace with str
License requirements: None.
- ReplAsstBuilder - Interface in nxopen.geometricutilities
-
- REPLAY_RECIPE - Static variable in class nxopen.LoadOptions.UpdateSubsetOnLoad
-
do not update
- replayPath(Tag) - Method in interface nxopen.uf.UFParam
-
- replayRecipe() - Method in interface nxopen.assemblies.Subset
-
Replay this subset.
- replayRefreshBeforeEachPath() - Method in interface nxopen.cam.Preferences
-
Returns the refresh before each path replay
License requirements: None.
- replaySpeed() - Method in interface nxopen.cam.DisplayPath
-
Returns the replay speed.
- replaySpeed() - Method in interface nxopen.cam.OperationDisplayOptionsBuilder
-
Returns the replay speed.
- replayTimestampNumber() - Method in interface nxopen.features.FeatureReplayBuilder
-
Returns the replay timestamp number of feature.
- replayToolPath(CAMObject[]) - Method in interface nxopen.cam.CAMSetup
-
Replay tool path
License requirements: cam_base ("CAM BASE")
.
- report() - Method in interface nxopen.features.OptimizeFaceBuilder
-
Returns the report flag.
- Report - Interface in nxopen.report
-
Represents a report.
- REPORT - Static variable in class nxopen.routing.ReuseLibrary.ReportInBom
-
Report in the Bill of Materials
- Report.MoveItemLocation - Class in nxopen.report
-
Represents the moving item location.
- REPORT_CB - Static variable in class nxopen.uf.UFClone.NotifyCb
-
- REPORT_IMAGES_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- REPORT_IMAGES_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- REPORT_TEMPLATE_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- REPORT_TEMPLATE_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- REPORT_ZIP_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- REPORT_ZIP_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- reportAssociation(IFEModel, AssociationUtilities.PrintInfoType, String) - Method in interface nxopen.cae.AssociationUtilities
-
This report association summary of fem/afm component
License requirements: nx_masterfem ("Finite Element Modeling")
.
- ReportBuilder - Interface in nxopen.drawings
-
- reportCollection() - Method in interface nxopen.report.Report
-
Returns the report collection object.
- reportContext() - Method in interface nxopen.visualreporting.VisualReport
-
- reportContextOfVisualReport() - Method in interface nxopen.visualreporting.VisualReportBuilder
-
- reportDiscrepancies() - Method in interface nxopen.routing.CompareRunsBuilder
-
Returns the option to report discrepancies down to attribute level.
- reportDisplayFlattenShape() - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
Returns the option to display result flatten shape in report.
- reportDisplaySpringback() - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
Returns the option to display springback result in report.
- reportDisplayStrain() - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
Returns the option to display strain in report.
- reportDisplayStress() - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
Returns the option to display stress in report.
- reportDisplayThickness() - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
Returns the option to display thickness information in report.
- reportDisplayViewControl() - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
Returns the option to control view while creating screen image in report.
- reportDown(VisualReportExplorer.ReportOnObjectsOption) - Method in interface nxopen.visualreporting.VisualReportExplorer
-
- reportDown(NXObject[], VisualReportExplorer.ReportOnObjectsOption) - Method in interface nxopen.visualreporting.VisualReportExplorer
-
Report down from a starting array of objects.
- reportFile - Variable in class nxopen.validate.XmlComparator.Options
-
File specification of report file.
- reportFileName() - Method in interface nxopen.cae.modelcheck.ModelSetupCheckBuilder
-
Returns the full name of the report file.
- reportFilterObject() - Method in interface nxopen.cam.InspectionGraphicalReportBuilder
-
Returns the report filter object
License requirements: None.
- reportFilterType() - Method in interface nxopen.cam.InspectionGraphicalReportBuilder
-
Returns the report filter type
License requirements: None.
- reportHeader() - Method in interface nxopen.cam.InspectionAnalyzeOutputBuilder
-
Returns the report header option
License requirements: None.
- ReportImage - Interface in nxopen.report
-
Represents a report image.
- reportingCsys() - Method in interface nxopen.cam.InspectionAnalyzeOutputBuilder
-
Returns the reporting csys to use
License requirements: None.
- reportingObjectType() - Method in interface nxopen.visualreporting.VisualReport
-
- reportingObjectTypeOfVisualReport() - Method in interface nxopen.visualreporting.VisualReportBuilder
-
Returns the reporting object type of the
VisualReport
being built by this builder.
- reportingPerType() - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder
-
Returns the reporting per option
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- reportingStyle() - Method in interface nxopen.visualreporting.VisualReport
-
- reportingStyleOfVisualReport() - Method in interface nxopen.visualreporting.VisualReportBuilder
-
Returns the reporting style of the
VisualReport
being built by this builder.
- ReportManager - Interface in nxopen.report
-
Represents the report manager.
- reportManager() - Method in interface nxopen.Session
-
- ReportManager.OriginalImageDimensionData - Class in nxopen.report
-
- reportMirrorResultXML() - Method in interface nxopen.features.shipdesign.MirrorShipStructureBuilder
-
Returns an XML report with mirror process information will be shown if set to true.
- reportName() - Method in interface nxopen.ame.ReportsSettingsBuilder
-
Returns the string report name
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- reportName() - Method in interface nxopen.cam.InspectionGraphicalReportBuilder
-
Returns the report operation name
License requirements: None.
- reportNameOfVisualReport() - Method in interface nxopen.visualreporting.VisualReportBuilder
-
Returns the name of the
VisualReport
being built by this builder.
- reportOnChildren(NXObject[], VisualReportExplorer.ReportOnObjectsOption) - Method in interface nxopen.visualreporting.VisualReportExplorer
-
Report on the children of nxObjects.
- reportOnObjects(NXObject[], VisualReportExplorer.ReportOnObjectsOption) - Method in interface nxopen.visualreporting.VisualReportExplorer
-
Set objects to report upon.
- reportOnParents(NXObject[], VisualReportExplorer.ReportOnObjectsOption) - Method in interface nxopen.visualreporting.VisualReportExplorer
-
Report on the parents of the nxObjects.
- reportPer() - Method in interface nxopen.geometricanalysis.SurfaceContinuityAnalysisBuilder
-
Returns the reporting type
License requirements: None.
- ReportPreference - Interface in nxopen.report
-
Manages the preference data.
- reportResult(String) - Method in interface nxopen.weld.WeldAdvisorBuilder
-
The report results to xml file
License requirements: ugweld ("UG WELD")
.
- reportRouteErrors() - Method in interface nxopen.preferences.RoutingElectrical
-
Returns the option to report auto/manual route errors to the listing window.
- ReportsSettingsBuilder - Interface in nxopen.ame
-
- reportTapHoleSizeForThreadedHoles() - Method in interface nxopen.annotations.HoleTableSettingsFormatBuilder
-
Returns the report tap hole size for threaded holes
License requirements: None.
- ReportTemplateBuilder - Interface in nxopen.ame
-
- reportTemplateName() - Method in interface nxopen.ame.ReportsSettingsBuilder
-
Returns the report template name
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- reportTitle() - Method in interface nxopen.cam.InspectionGraphicalReportBuilder
-
Returns the report title
License requirements: None.
- reportType() - Method in interface nxopen.ame.ReportsSettingsBuilder
-
Returns the selected report template type
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- reportType() - Method in interface nxopen.ame.ReportTemplateBuilder
-
Returns the enum report type
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- REPOSITION - Static variable in class nxopen.cam.InspectionOperationTransformBuilder.Transform
-
reposition
- REPOSITION - Static variable in class nxopen.cam.OperationTransformBuilder.Transform
-
reposition
- reposition(Point3d, Matrix3x3) - Method in interface nxopen.geometricutilities.TransformerData
-
Repositions the tool at a coordinate system.
- REPOSITION - Static variable in class nxopen.tooling.AddReusablePart.PositionMethod
-
- reposition() - Method in interface nxopen.tooling.StandardPartBuilder
-
Repositions the selected standard part component.
- repositionBody(Point3d, Matrix3x3, boolean) - Method in interface nxopen.tooling.ReusableObjectPasteBuilder
-
Moves the body to the selected point and orientation
License requirements: None.
- repositionBody(Point3d, Matrix3x3, boolean, boolean) - Method in interface nxopen.tooling.ReusePositioningObjectBuilder
-
Moves the body to the selected point and orientation
License requirements: None.
- repositionByOrigin(Point3d) - Method in interface nxopen.geometricutilities.TransformerData
-
Repositions the tool by changing its origin.
- repositionByPlane(TransformerData.ObjectType, Point3d, Vector3d) - Method in interface nxopen.geometricutilities.TransformerData
-
Repositions the tool by changing its plane.
- repositionDistance() - Method in interface nxopen.cam.CenterlineDrillTurningBuilder
-
Returns the reposition distance
License requirements: None.
- repositionFromCsys() - Method in interface nxopen.cam.InspectionOperationTransformBuilder
-
Returns the reposition from CSYS
License requirements: None.
- repositionFromCsys() - Method in interface nxopen.cam.OperationTransformBuilder
-
Returns the reposition from CSYS
License requirements: None.
- repositionGeometry() - Method in interface nxopen.drawings.ViewCopyTo3dBuilder
-
Returns the flag that indicates whether to automatically reposition geometry
License requirements: None.
- repositionInstance(Tag, double[], double[]) - Method in interface nxopen.uf.UFAssem
-
- repositionMethod() - Method in interface nxopen.tooling.ChannelAdjustBuilder
-
Returns the method for moving the cooling channels.
- repositionMethod() - Method in interface nxopen.tooling.LayoutRepositionBuilder
-
Returns the reposition method
License requirements: None.
- repositionMotion() - Method in interface nxopen.tooling.LayoutManagementBuilder
-
Returns the reposition motion
License requirements: None.
- repositionPartOccurrence(Component, Point3d, Matrix3x3) - Method in interface nxopen.routing.RouteManager
-
Repositions part component given position and transformation
License requirements: routing_base ("Routing Basic")
.
- repositionPartOccurrence(Tag, double[][], UFAssem.LevelOption) - Method in interface nxopen.uf.UFAssem
-
- repositionToCsys() - Method in interface nxopen.cam.InspectionOperationTransformBuilder
-
Returns the reposition to CSYS
License requirements: None.
- repositionToCsys() - Method in interface nxopen.cam.OperationTransformBuilder
-
Returns the reposition to CSYS
License requirements: None.
- repositionType() - Method in interface nxopen.tooling.LayoutRepositionBuilder
-
Returns the reposition type
License requirements: None.
- REPOST - Static variable in class nxopen.cam.CAMObject.Status
-
Object path must be post-processed
- REPRESENTATION_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
-
Representation Status
- reProjectCurvesOption() - Method in interface nxopen.features.VarsweepBuilder
-
Returns the re-project curves option
License requirements: None.
- reprojectEdgesAfterMoveNode() - Method in interface nxopen.features.RapidSurfaceBuilder
-
Reprojects edges after move node
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- reqHorizontalExact() - Method in interface nxopen.features.vehicledesign.HeadImpactFrontHeaderDetailBuilder
-
Returns the horizontal exact required approach angle.
- reqHorizontalExact() - Method in interface nxopen.features.vehicledesign.HeadImpactRearHeaderDetailBuilder
-
Returns the horizontal exact required approach angle.
- reqHorizontalLeftExact() - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarDetailBuilder
-
Returns the left horizontal required approach angle.
- reqHorizontalLeftExact() - Method in interface nxopen.features.vehicledesign.HeadImpactOtherRailDetailBuilder
-
Returns the left horizontal required approach angle.
- reqHorizontalLeftExact() - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder
-
Returns the left horizontal required approach angle.
- reqHorizontalLeftMax() - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder
-
Returns the left horizontal maximum required approach angle.
- reqHorizontalLeftMax() - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder
-
Returns the left horizontal maximum required approach angle.
- reqHorizontalLeftMax() - Method in interface nxopen.features.vehicledesign.HeadImpactRPillarDetailBuilder
-
Returns the left horizontal maximum required approach angle.
- reqHorizontalLeftMin() - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder
-
Returns the left horizontal minimum required approach angle.
- reqHorizontalLeftMin() - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder
-
Returns the left horizontal minimum required approach angle.
- reqHorizontalLeftMin() - Method in interface nxopen.features.vehicledesign.HeadImpactRPillarDetailBuilder
-
Returns the left horizontal minimum required approach angle.
- reqHorizontalRightExact() - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarDetailBuilder
-
Returns the right horizontal required approach angle.
- reqHorizontalRightExact() - Method in interface nxopen.features.vehicledesign.HeadImpactOtherRailDetailBuilder
-
Returns the right horizontal required approach angle.
- reqHorizontalRightExact() - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder
-
Returns the right horizontal required approach angle.
- reqHorizontalRightMax() - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder
-
Returns the right horizontal maximum required approach angle.
- reqHorizontalRightMax() - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder
-
Returns the right horizontal maximum required approach angle.
- reqHorizontalRightMax() - Method in interface nxopen.features.vehicledesign.HeadImpactRPillarDetailBuilder
-
Returns the right horizontal maximum required approach angle.
- reqHorizontalRightMin() - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder
-
Returns the right horizontal minimum required approach angle.
- reqHorizontalRightMin() - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder
-
Returns the right horizontal minimum required approach angle.
- reqHorizontalRightMin() - Method in interface nxopen.features.vehicledesign.HeadImpactRPillarDetailBuilder
-
Returns the right horizontal minimum required approach angle.
- request() - Method in interface nxopen.motion.GraphBuilder
-
- requestCreateCutout(PenetrationRequest) - Method in interface nxopen.features.shipdesign.PenetrationUtils
-
Create cut out for the request
License requirements: nx_penetration_mgmt ("Penetration Management")
.
- requestCsysIndex - Variable in class nxopen.motion.GraphBuilder.CurveData
-
Deprecated.
Attribute csys choice
- requestDeselections(TaggedObject[]) - Method in interface nxopen.Selection
-
Submit a request to the current selection owner to deselect the given objects.
- requestIndex - Variable in class nxopen.motion.GraphBuilder.CurveData
-
Deprecated.
Attribute request choice
- requestName() - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder
-
Returns the request name
License requirements: None.
- requests - Variable in class nxopen.features.shipdesign.PenetrationUtils.Verify_penetrationsData
-
- requestSelections(TaggedObject[]) - Method in interface nxopen.Selection
-
Submit a request to the current selection owner to select the given objects.
- requestType() - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder
-
Returns the request type
License requirements: None.
- requestType() - Method in interface nxopen.validate.OverrideBuilder
-
Returns the type of override request
License requirements: None.
- REQUIRE_PERPENDICULAR - Static variable in class nxopen.uf.UFConstants
-
- REQUIRE_PLANAR - Static variable in class nxopen.uf.UFConstants
-
- REQUIRED - Static variable in class nxopen.annotations.SearchCriteriaSurfaceFinishBuilder.SurfaceFinishTypes
-
required
- required() - Method in interface nxopen.cae.DurSpecialistAnalysisTypeBuilder
-
Returns the required simulation object proxies
License requirements: None.
- REQUIRED - Static variable in class nxopen.features.shipdesign.ManufacturingStockBuilder.CheckBoxStatus
-
Checked and Cannot be modified
- required - Variable in class nxopen.NXObject.AttributeInformation
-
The attribute is required on the given object
- required() - Method in interface nxopen.weld.CharacteristicsValueBuilder
-
Returns the indication if the attribute is required to be placed on the output. true indicates
the attribute will always be placed on the output, false indicates the attribute does not
have to be placed on the output.
- REQUIRED_AND_MODIFIER - Static variable in class nxopen.annotations.SearchCriteriaSurfaceFinishBuilder.SurfaceFinishTypes
-
required and modifier
- REQUIRED_AND_MODIFIER_AND_ALL_AROUND - Static variable in class nxopen.annotations.SearchCriteriaSurfaceFinishBuilder.SurfaceFinishTypes
-
required and modifier and all around
- requiredFaceNode(NXObject, boolean) - Method in interface nxopen.weld.ConnectionFinderBuilder
-
Identify if the face node is required (true) or optional (false).
- Requirement - Interface in nxopen.mechatronics
-
Represents the Requirement class.
- REQUIREMENT - Static variable in class nxopen.mechatronics.SystemRoot.Type
-
Requirement
- requirement - Variable in class nxopen.uf.UFGdt.AskToleranceFromIndexData
-
- Requirement - Interface in nxopen.validate
-
- requirement() - Method in interface nxopen.Validation
-
Returns the requirement path.
- RequirementBuilder - Interface in nxopen.mechatronics
-
- RequirementBuilder - Interface in nxopen.validate
-
- RequirementBuilder.DataTypeOptions - Class in nxopen.validate
-
This enum represents the data type of the value in requirement
- RequirementBuilder.DefinitionMethodOptions - Class in nxopen.validate
-
This enum represents the type of requirement definition method
- RequirementBuilder.RelationalOperatorOptions - Class in nxopen.validate
-
This enum represents the relational operator for comparing values
- RequirementBuilder.RequirementTypeOptions - Class in nxopen.validate
-
This enum represents the type of requirement
- RequirementBuilder.SeverityOptions - Class in nxopen.validate
-
This enum represents the severity level when a requirement is not satisfied
- RequirementCheck - Interface in nxopen.validate
-
- RequirementCheck.SaveResultsToTeamcenterOptions - Class in nxopen.validate
-
This enum represents the Save Results to Teamcenter option
- RequirementCheckCollection - Interface in nxopen.validate
-
- requirementChecks() - Method in interface nxopen.BasePart
-
Returns the RequirementCheckCollection instance belonging to this part .
- requirementCollection() - Method in interface nxopen.mechatronics.MechatronicsManager
-
Returns the RequirementCollection instance belonging to this part .
- RequirementCollection - Interface in nxopen.mechatronics
-
- RequirementCollection - Interface in nxopen.validate
-
- RequirementCollection.SourceTypeOptions - Class in nxopen.validate
-
This enum represents the type of external source where requirement is defined
- RequirementData() - Constructor for class nxopen.mechatronics.FunctionObjectBuilder.RequirementData
-
- RequirementData(String, String, String) - Constructor for class nxopen.mechatronics.FunctionObjectBuilder.RequirementData
-
Constructor for the RequirementData object.
- requirementDesc - Variable in class nxopen.mechatronics.FunctionObjectBuilder.RequirementData
-
Requirement description
- requirementId - Variable in class nxopen.mechatronics.FunctionObjectBuilder.RequirementData
-
Requirement Id, only makes sense in NX/Manager mode
- requirementMode() - Method in interface nxopen.MeasureBuilder
-
Returns the requirement mode
License requirements: None.
- requirementName - Variable in class nxopen.mechatronics.FunctionObjectBuilder.RequirementData
-
Requirement name
- requirements() - Method in interface nxopen.BasePart
-
Returns the RequirementCollection instance belonging to this part .
- REQUIREMENTS_VALIDATION_STATUS_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
-
Requirement validate result
- requirementsControl() - Method in interface nxopen.features.vehicledesign.BumperPendulumBuilder
-
Returns the requirements control for standard driven or user defined.
- requirementsControl() - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder
-
Returns the requirements control types to define the close range visibility.
- requirementsControl() - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder
-
Returns the requirements control for standard driven or user defined.
- requirementsControl() - Method in interface nxopen.features.vehicledesign.DynamicCurbBuilder
-
Returns the requirements control for standard driven or user defined.
- requirementsControl() - Method in interface nxopen.features.vehicledesign.GroundClearanceBuilder
-
Returns the value to determine what type of requirement is controlling the ground clearance values.
- requirementsControl() - Method in interface nxopen.features.vehicledesign.HeadImpactBuilder
-
Returns the requirements control for standard driven or user defined.
- requirementsControl() - Method in interface nxopen.features.vehicledesign.InnerAngleBuilder
-
Returns the requirements control for standard driven or user defined.
- requirementsControl() - Method in interface nxopen.features.vehicledesign.OilPanBuilder
-
Returns the requirements control for standard driven or user defined.
- requirementsControl() - Method in interface nxopen.features.vehicledesign.SlopeBuilder
-
Returns the requirements control for standard or user defined.
- requirementsControl() - Method in interface nxopen.features.vehicledesign.StaticCurbBuilder
-
Returns the requirements control for standard driven or user defined.
- requirementsControl() - Method in interface nxopen.features.vehicledesign.WheelCoveringBuilder
-
Returns the requirements control for standard driven or user defined.
- requirementsControl() - Method in interface nxopen.features.vehicledesign.WheelFixingBuilder
-
Returns the requirements control for standard driven or user defined.
- requirementTolerance() - Method in interface nxopen.validate.RequirementBuilder
-
Returns the tolerance for point type requirement
License requirements: None.
- requirementTypeOption() - Method in interface nxopen.validate.RequirementBuilder
-
Returns the requirement type option
License requirements: None.
- RequirementUtils - Interface in nxopen.pdm
-
Collection of PDM utility methods
To obtain an instance of this class, refer to
Session
Created in NX6.0.3
- requirementUtils() - Method in interface nxopen.Session
-
Returns the
RequirementUtils
instance belonging to this session
Created in NX6.0.3
- requireUdfMappingForEdit(Tag) - Method in interface nxopen.uf.UFModlGeneral
-
- RequireUdfMappingForEditData() - Constructor for class nxopen.uf.UFModlGeneral.RequireUdfMappingForEditData
-
- requireUdfMappingForInsert(Tag) - Method in interface nxopen.uf.UFModlGeneral
-
- RequireUdfMappingForInsertData() - Constructor for class nxopen.uf.UFModlGeneral.RequireUdfMappingForInsertData
-
- reqVerticalMax() - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder
-
Returns the vertical maximum required approach angle.
- reqVerticalMax() - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder
-
Returns the vertical maximum required approach angle.
- reqVerticalMax() - Method in interface nxopen.features.vehicledesign.HeadImpactFrontHeaderDetailBuilder
-
Returns the vertical maximum required approach angle.
- reqVerticalMax() - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarDetailBuilder
-
Returns the vertical maximum required approach angle.
- reqVerticalMax() - Method in interface nxopen.features.vehicledesign.HeadImpactOtherRailDetailBuilder
-
Returns the vertical maximum required approach angle.
- reqVerticalMax() - Method in interface nxopen.features.vehicledesign.HeadImpactRearHeaderDetailBuilder
-
Returns the vertical maximum required approach angle.
- reqVerticalMax() - Method in interface nxopen.features.vehicledesign.HeadImpactRPillarDetailBuilder
-
Returns the vertical maximum required approach angle.
- reqVerticalMax() - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder
-
Returns the vertical maximum required approach angle.
- reqVerticalMax() - Method in interface nxopen.features.vehicledesign.HeadImpactUpperRoofDetailBuilder
-
Returns the vertical maximum required approach angle.
- reqVerticalMin() - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder
-
Returns the vertical minimum required approach angle.
- reqVerticalMin() - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder
-
Returns the vertical minimum required approach angle.
- reqVerticalMin() - Method in interface nxopen.features.vehicledesign.HeadImpactFrontHeaderDetailBuilder
-
Returns the vertical minimum required approach angle.
- reqVerticalMin() - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarDetailBuilder
-
Returns the vertical minimum required approach angle.
- reqVerticalMin() - Method in interface nxopen.features.vehicledesign.HeadImpactOtherRailDetailBuilder
-
Returns the vertical minimum required approach angle.
- reqVerticalMin() - Method in interface nxopen.features.vehicledesign.HeadImpactRearHeaderDetailBuilder
-
Returns the vertical minimum required approach angle.
- reqVerticalMin() - Method in interface nxopen.features.vehicledesign.HeadImpactRPillarDetailBuilder
-
Returns the vertical minimum required approach angle.
- reqVerticalMin() - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder
-
Returns the vertical minimum required approach angle.
- reqVerticalMin() - Method in interface nxopen.features.vehicledesign.HeadImpactUpperRoofDetailBuilder
-
Returns the vertical minimum required approach angle.
- reselection - Variable in class nxopen.Selection.SelectionDescriptor
-
- reselTargetData() - Method in interface nxopen.tooling.EnlargeSurfaceBuilder
-
Returns the reselect target face data from builder.
- resequencePaths(CAMObject[]) - Method in interface nxopen.cam.InspectionSetup
-
Resequence selected paths using nearest neighbor order
License requirements: None.
- resequenceTols(CAMObject[]) - Method in interface nxopen.cam.InspectionSetup
-
Resequence tolerances
License requirements: None.
- reserve(String, String) - Method in interface nxopen.LicenseManager
-
Reserve a license against the specified license context.
- reserve(String, String) - Method in interface nxopen.uf.UF
-
- RESERVED_CON1 - Static variable in class nxopen.Sketch.ConstraintType
-
Do not use
- RESERVED_CON1 - Static variable in class nxopen.uf.UFSket.ConType
-
- RESERVED_CON2 - Static variable in class nxopen.Sketch.ConstraintType
-
Do not use
- RESERVED_CON2 - Static variable in class nxopen.uf.UFSket.ConType
-
- RESERVED_CON3 - Static variable in class nxopen.Sketch.ConstraintType
-
Do not use
- RESERVED_CON3 - Static variable in class nxopen.uf.UFSket.ConType
-
- RESERVED_CON4 - Static variable in class nxopen.Sketch.ConstraintType
-
Do not use
- RESERVED_CON4 - Static variable in class nxopen.uf.UFSket.ConType
-
- RESERVED_CON5 - Static variable in class nxopen.Sketch.ConstraintType
-
Do not use
- RESERVED_CON5 - Static variable in class nxopen.uf.UFSket.ConType
-
- RESERVED_CON6 - Static variable in class nxopen.Sketch.ConstraintType
-
Do not use
- RESERVED_CON6 - Static variable in class nxopen.uf.UFSket.ConType
-
- reset(MultiValueObjectsPort.JaAmeValueObjectUsageType) - Method in interface nxopen.ame.InterfaceMemberPort
-
Reset the rule
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- reset() - Method in interface nxopen.AttributeIterator
-
Rewind the iterator and return all its constraints to their default values.
- reset() - Method in interface nxopen.cae.DurSpecialistSolutionBuilder
-
Reset to default according to analysis type
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- reset() - Method in interface nxopen.features.shipdesign.SplitStandardPartBuilder
-
Resets the calculation results of standard part split when tool object changes.
- reset() - Method in interface nxopen.geometricanalysis.GeometricProperties
-
Clears all markers showing the local geometric properties in the graphics window
License requirements: None.
- reset() - Method in interface nxopen.geometricanalysis.SimpleInterference
-
- reset() - Method in interface nxopen.PartCleanup
-
Resets all the properties back to the default values (i.e. everything
turned off).
- reset() - Method in interface nxopen.presslinesimulation.MachineAdjustmentBuilder
-
Resets the adjustment to its default.
- RESET - Static variable in class nxopen.sim.IsvControlPanelBuilder.VncMode
-
RESET
- reset() - Method in interface nxopen.sim.postconfigurator.PostConfiguratorBuilder
-
Resets the post configurator data.
- reset() - Method in interface nxopen.sim.TimeAnalysis
-
Reset the Time Analysis
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- RESET_ALL - Static variable in class nxopen.tooling.MWMoldedPartValidationBuilder.CalculateOption
-
calculate and replace all properties for region faces
- resetActiveForSketching() - Method in interface nxopen.drawings.DrawingSheet
-
Resets active for sketching view in given drawing.
- resetAllExtensions(double) - Method in interface nxopen.annotations.CenterlineBuilder
-
Reset all extensions by the supplied defaultValue
License requirements: drafting ("DRAFTING")
.
- resetAllSegments() - Method in interface nxopen.features.GuidedExtensionBuilderEx
-
The action that resets all the segments in the loop to their original state
License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_2 ("advanced freeform modeling") OR ug_mold_design ("UG MOLD") OR die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- resetAllSegments() - Method in interface nxopen.tooling.GuidedExtensionBuilder
-
The action that resets all the segments in the loop to their original state
License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_2 ("advanced freeform modeling") OR ug_mold_design ("UG MOLD") OR die_engineering ("DIE ENGINEERING")
.
- resetAnalysisPoint() - Method in interface nxopen.geometricanalysis.DupinBuilder
-
Reset the analysis point to accept dynamic input.
- resetAnimationPolyline() - Method in interface nxopen.features.RapidSurfaceBuilder
-
Resets animation polyline
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- resetAttributes() - Method in interface nxopen.cam.fbm.Feature
-
Resets all attributes to their original value
License requirements: cam_base ("CAM BASE")
.
- resetAttributes(LogicalObject[]) - Method in interface nxopen.pdm.PartOperationImportBuilder
-
Clear all attributes from the selected logical objects
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- resetAttributeValue(String) - Method in interface nxopen.cam.fbm.Feature
-
Resets an attribute to its original value
License requirements: cam_base ("CAM BASE")
.
- resetBaseInstance() - Method in interface nxopen.geometricutilities.ReferencePattern
-
Reset the base instance indices to an "undefined" state.
- resetBuilderData() - Method in interface nxopen.features.shipdesign.SteelFeatureSpreadsheetBuilder
-
This method cleans up the imported features from current work part, also it rereads
the data file and registration.
- resetBuilderData() - Method in interface nxopen.tooling.MWDefineSheetsBuilder
-
Reset the data for the "Define Sheets" builder
License requirements: None.
- resetCalloutRules(Tag) - Method in interface nxopen.uf.UFGdt
-
- resetColors() - Method in interface nxopen.PlotColorsWidthsBuilder
-
Reset drawing sheet colors
License requirements: None.
- resetComponent() - Method in interface nxopen.linedesigner.FastPlacementUtilityBuilder
-
To reset component used for fast placement
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- resetComponentDisplay() - Method in interface nxopen.PartCleanup
-
Returns the option that specifies whether to remove assembly-specific
geometry in component parts.
- resetConeheadAttrb() - Method in interface nxopen.uf.UFDisp
-
- resetConfig() - Method in interface nxopen.issue.IssueList
-
Resets the config of
IssueList
License requirements: nx_issue_mgmt ("NX Issue Tracking")
Created in NX9.0.0
- resetContextEntity(TaggedObject, TaggedObject) - Method in interface nxopen.features.shipdesign.ProfileCutoutBuilder
-
Resets the section types acoording to the tightness attribute on the target and the context attribute on the profile
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- resetData() - Method in interface nxopen.geometricanalysis.FaceAnalysisDataRangeBuilder
-
Resets data range.
- resetData() - Method in interface nxopen.linedesigner.PickRectanglePointsBuilder
-
To reset rectangle data
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- resetDefaultModel() - Method in interface nxopen.ame.Manage3DModelsBuilder
-
Reset the default 3d model from the associated
ProductDefinition
License requirements: None.
- resetDefaults(int, int, int, int) - Method in interface nxopen.uf.UFObj
-
- resetDefaultSymbol() - Method in interface nxopen.ame.Manage2dSymbolsBuilder
-
Reset the default 2d symbol from the associated
ProductDefinition
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
Created in NX11.0.0
- resetDesignVariables() - Method in interface nxopen.cae.ModelUpdateSolution
-
Resets the design variables
License requirements: nx_correl_update ("FE Model Update")
.
- resetDialogBoxSettings() - Method in interface nxopen.preferences.SessionUserInterfaceUI
-
Resets all dialog box settings
License requirements: None.
- resetDisplay() - Method in interface nxopen.positioning.Network
-
Returns the display objects to their model positions.
- resetDocumentStructure(DocumentType) - Method in interface nxopen.ame.DocumentStructureBuilder
-
Reset the Document Structure for a given Document type.
- resetDrag() - Method in interface nxopen.mechanicalrouting.EditPointBuilder
-
Reset a drag operation
Resets the position of routing objects in constraint network back to their initial position.
- resetDrag() - Method in interface nxopen.mechanicalrouting.MovePathBuilder
-
Reset a drag operation
License requirements: routing_base ("Routing Basic")
.
- resetEditPoles() - Method in interface nxopen.features.MatchEdgeBuilder
-
Resets surface during edit pole.
- resetElementIds(int) - Method in interface nxopen.uf.UFSf
-
- resetExpressionValue() - Method in interface nxopen.IPlane
-
Reset the expression value in on curve plane plane
License requirements: None.
- resetExtensionTarget(LaminatePly) - Method in interface nxopen.cae.LaminatePly
-
For global link ply subtype, resets the ply link target
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- resetExtraData() - Method in interface nxopen.geometricutilities.RotationSetBuilder
-
Resets rotation extra data.
- resetExtraData() - Method in interface nxopen.geometricutilities.StyledSweepDoubleOnPathDimBuilder
-
Reset pivot position extra data.
- resetFallOffToLinear() - Method in interface nxopen.features.subdivision.TransformCageData
-
Resets the falloff scale to linear.
- resetFilter() - Method in interface nxopen.blockstyler.SelectObject
-
Resets the filter for select object block
License requirements: None.
- resetFormSheetMapping(DocumentType) - Method in interface nxopen.ame.FormSheetSettingsBuilder
-
Reset the form sheet mapping for a given document type.
- resetFreeEdgeProjectionOption() - Method in interface nxopen.features.ReplaceFaceBuilder
-
The function used to set m_resetFreeEdgeProjectionOption in ReplaceFaceBuilder as true
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE")
.
- resetFreeTextOfLegendItem(int) - Method in interface nxopen.cae.xyplot.LegendTable
-
Resets the free text of legend table item
License requirements: None.
- resetFromFeature(Feature, Component, View, Point3d) - Method in interface nxopen.annotations.HoleCalloutSettingsBuilder
-
Reset the builder data based on a feature if the feature is a hole feature.
- resetFromTable(Tag) - Method in interface nxopen.uf.UFOper
-
- resetGougeChecking() - Method in interface nxopen.cam.Operation
-
Reset Gouge Checking
License requirements: cam_base ("CAM BASE")
.
- resetHoletableOrdinateOrigin() - Method in interface nxopen.annotations.HoleTableBuilder
-
Reset the Ordinate Origin of the hole table
License requirements: None.
- resetIgnoredCollision() - Method in interface nxopen.tooling.RunSimulationBuilder
-
Reset all ignored settings of the collision
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- resetImageSize() - Method in interface nxopen.display.ImageBaseBuilder
-
Resets the image to its original size.
- resetInitData() - Method in interface nxopen.tooldesigner.ReusePieChartBuilder
-
Reset init data
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- resetInitialCopyLocation() - Method in interface nxopen.gateway.CopyCutBuilder
-
Reset the initial copy location.
- resetInitialPasteLocation() - Method in interface nxopen.SketchPasteBuilder
-
Reset the initial paste location, after this previously set initial paste location will not be used
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.
- resetItem() - Method in interface nxopen.features.shipdesign.StandardPartItemBuilder
-
Resets the standard part item builder to its intial state.
- resetLabelPosition() - Method in interface nxopen.annotations.HoleTableBuilder
-
Reset all the hole label's position of hole table
License requirements: None.
- resetLibraryItemLink() - Method in interface nxopen.ame.InterfaceMemberPort
-
Reset the library item link
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- resetListToGlobal() - Method in interface nxopen.drawings.DraftingComponentSelectionBuilder
-
Reset list of components to those specified by Properties->Drawings->Secondary Geometry
License requirements: None.
- resetMachine() - Method in interface nxopen.sim.IsvControlPanelBuilder
-
Simulation Control Panel: (Full) Reset Machine
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- resetMotionToThreeDimensions() - Method in interface nxopen.geometricutilities.ModlMotion
-
Reset motion to three dimensions
License requirements: None.
- resetNameList() - Method in interface nxopen.features.shipdesign.ShipNamesListBuilder
-
- resetNaming(NXObject) - Method in interface nxopen.ame.AMEManager
-
Apply naming rule
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- resetNodeIds(int) - Method in interface nxopen.uf.UFSf
-
- resetPartIndex() - Method in interface nxopen.features.shipdesign.StandardPartFrameworkBuilder
-
Resets the standard part index so that the next standard part would be added with the index in its name starting from 1.
- resetPixelWidthOptions() - Method in interface nxopen.preferences.PartVisualizationLine
-
Resets all pixel width options to settings specified by customer
defaults.
- resetPoleEditing() - Method in interface nxopen.features.EdgeSymmetryBuilder
-
Resets the pole editing to initial matched state
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- resetProjectTemplate() - Method in interface nxopen.ame.EplanSettingsBuilder
-
Reset the eplan project template information
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- resetPropertyList() - Method in interface nxopen.ame.SymbolAnnotationBuilder
-
Reset the property list.
- resetReferenceStock() - Method in interface nxopen.routing.StockCollection
-
Resets the reference
Stock
information to null.
- resetRegions() - Method in interface nxopen.SketchAssociativeTrimBuilder
-
The regions are forced to be deselected
License requirements: solid_modeling ("SOLIDS MODELING")
.
- resetReplaceFaceMethod() - Method in interface nxopen.features.ReplaceFaceBuilder
-
The function used to set m_resetReplaceFaceMethod in ReplaceFaceBuilder as true
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE")
.
- resetReportObjects() - Method in interface nxopen.visualreporting.VisualReportExplorer
-
Resets the objects to report upon.
- resetRuleInputCache() - Method in interface nxopen.features.shipdesign.StandardPartFrameworkBuilder
-
Resets rule trigger source cache so the rule trigger evaluation can start from original point.
- resetSection(Curve) - Method in interface nxopen.die.AddendumSectionBuilder
-
Resets the section to the last saved state.
- resetSessionTranslucency(boolean) - Method in interface nxopen.preferences.ObjectPreferences
-
Resets the session translucency
License requirements: None.
- resetShowDeviation() - Method in interface nxopen.geometricanalysis.CurveContinuityBuilder
-
Prepare to toggle deviation label
License requirements: gateway ("UG GATEWAY")
.
- resetSize() - Method in interface nxopen.annotations.PmiManager
-
Resets the size of all the PMI displayed in the part.
- resetSizes() - Method in interface nxopen.tooling.WorkpieceBuilder
-
Resets workpiece sizes
License requirements: None.
- resetSpine() - Method in interface nxopen.geometricutilities.AlongSpineBuilder
-
Reset the spine
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.
- resetStructuresByRule() - Method in interface nxopen.features.shipdesign.SelectStructuresBuilder
-
Resets the structures to be added to the view by rule
License requirements: nx_ship_drafting ("Ship Drafting")
.
- resetSystemTemplate() - Method in interface nxopen.cae.xyplot.BaseTemplateManager
-
Resets system template
License requirements: None.
- resetTargets() - Method in interface nxopen.cae.ModelUpdateSolution
-
Resets the targets
License requirements: nx_correl_update ("FE Model Update")
.
- resetTemplate(String) - Method in interface nxopen.cae.xyplot.BaseTemplateManager
-
Resets to default value
License requirements: None.
- resetTimestampToLatestFeature() - Method in interface nxopen.Part
-
Sets the timestamp for the part to the timestamp of the latest feature in the part.
- resetToCustomerDefault() - Method in interface nxopen.cae.modelcheck.ElementQualitySetting
-
Reset the quality check setting as customer default
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- resetToCustomerDefault() - Method in interface nxopen.cae.modelcheck.ITestValue
-
Reset as customer default setting
License requirements: None.
- resetToDefault() - Method in interface nxopen.ame.DocumentStructureBuilder
-
Reset the Document Structure for all Document types.
- resetToDefault() - Method in interface nxopen.ame.ElectricalAnnotationSettingsBuilder
-
Reset to default.
- resetToDefault() - Method in interface nxopen.ame.ElectricalConnectionSettingsBuilder
-
Resets electrical connection settings to default
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- resetToDefault() - Method in interface nxopen.ame.FormSheetSettingsBuilder
-
Reset the form sheet mapping for all document types.
- resetToDefault() - Method in interface nxopen.ame.GeneralAnnotationSettingsBuilder
-
Set the default values
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- resetToDefault() - Method in interface nxopen.ame.GeneralConnectionSettingsBuilder
-
Resets general connection settings to default
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- resetToDefault() - Method in interface nxopen.ame.OpticalAnnotationSettingsBuilder
-
Reset to default.
- resetToDefault() - Method in interface nxopen.ame.OpticalConnectionSettingsBuilder
-
Resets optical connection settings to default
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- resetToDefault() - Method in interface nxopen.ame.SymbolAnnotationSettingsBuilder
-
Reset to default setting
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- resetToDefault() - Method in interface nxopen.cae.xyplot.PlotGraphTemplate
-
Resets the graph template to default values
License requirements: None.
- resetToDefault() - Method in interface nxopen.cam.ToolAxisInterpolate
-
The action of Reset to Default
License requirements: cam_base ("CAM BASE")
.
- resetToDefault() - Method in interface nxopen.uf.UFClone
-
- resetToDefault(Tag) - Method in interface nxopen.uf.UFCutLevels
-
- resetToDefaults() - Method in interface nxopen.cae.qualityaudit.ActionSettings
-
Reset the action settings to default values
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- resetToDesignState(Part) - Method in interface nxopen.dmu.DMUManager
-
Resets the changes made to the part, related to the assets which can be captured in the
ISnapshot
.
- resetToSnapped() - Method in interface nxopen.assemblies.AddComponentBuilder
-
Resets the component to snapped position and orientation
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- resetToTriangularCorner() - Method in interface nxopen.features.StyledCornerBuilder
-
Reset to triangular corner
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- resetTransformerToCentroidOfSelection() - Method in interface nxopen.features.subdivision.CageManipulatorData
-
- resetTransformerToCentroidOfSelection() - Method in interface nxopen.features.subdivision.CopyCageBuilder
-
- resetTraverseData() - Method in interface nxopen.tooling.TraverseLoopBuilder
-
Reset traverse data after one loop closed.
- resetTrimRegions() - Method in interface nxopen.features.TrimCurve2Builder
-
The function deselects all trim regions
License requirements: solid_modeling ("SOLIDS MODELING")
.
- resetUpdateLock(int) - Method in interface nxopen.tooling.MWPartingManagerBuilder
-
Reset the update lock.
- resetValues() - Method in interface nxopen.routing.EditCharacteristicsBuilder
-
Reset the characteristic values of the selected objects.
- resetViewVisibilityToGlobal(View) - Method in interface nxopen.layer.LayerManager
-
Resets a view's layer visibility to the global states.
- resetWidthHeight() - Method in interface nxopen.linedesigner.PickRectanglePointsBuilder
-
To reset rectangle width and height
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- resetWidths() - Method in interface nxopen.PlotColorsWidthsBuilder
-
Reset drawing sheet widths
License requirements: None.
- resfilename - Variable in class nxopen.cae.SimResultReference.ResultFileData
-
result file name
- resfilename - Variable in class nxopen.cae.SimSolution.ResultFileData
-
result file name
- RESISTANCE_SPOT - Static variable in class nxopen.weld.PointMarkBuilder.WeldTypes
-
Resistance Spot
- RESISTANCE_SPOT - Static variable in class nxopen.weld.WeldAdvisorCustomerDefault
-
Resistance Spot
- RESISTANCE_SPOT - Static variable in class nxopen.weld.WeldFeatureSetType
-
Resistance Spot
- RESISTANCE_SPOT_FEATURE - Static variable in class nxopen.uf.UFConstants
-
- RESISTANCE_SPOT_FEATURE - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
-
- resistanceExpression() - Method in interface nxopen.motion.PMDCMotorBuilder
-
Returns the Resistance Expression
License requirements: nx_motion_motor ("NX Motion Motor")
.
- resize() - Method in interface nxopen.annotations.PmiManager
-
Resizes all PMI symbols displayed in the active view
License requirements: geometric_tol ("GDT")
.
- RESIZE_BEND_ANGLE - Static variable in class nxopen.tooling.BendOperationBuilder.OverbendOptions
-
overbend by resize bend angle
- RESIZE_BEND_RADIUS - Static variable in class nxopen.tooling.BendOperationBuilder.OverbendOptions
-
overbend by resize bend radius
- RESIZE_OUTLINE - Static variable in class nxopen.diagramming.TextStyleBuilder.TextAutoFitType
-
- RESIZE_WITH_CONTENTS - Static variable in class nxopen.blockstyler.Tree.ColumnResizePolicy
-
Width resized with contents.
- RESIZE_WITH_TREE - Static variable in class nxopen.blockstyler.Tree.ColumnResizePolicy
-
Width resize with tree window resize.
- resizeAllDirections() - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder
-
Returns the option to enlarge or resize surface for all directions.
- ResizeBendAngle - Interface in nxopen.features
-
Represents a resize bend angle feature
To create or edit an instance of this class, use
ResizeBendAngleBuilder
Created in NX5.0.0
- ResizeBendAngleBuilder - Interface in nxopen.features.sheetmetal
-
- ResizeBendRadius - Interface in nxopen.features
-
Represents a resize bend radius feature
To create or edit an instance of this class, use
ResizeBendRadiusBuilder
Created in NX5.0.0
- ResizeBendRadiusBuilder - Interface in nxopen.features.sheetmetal
-
Represents a ResizeBendRadius feature builder.
- ResizeBendRadiusBuilder.BendReliefTypeOptions - Class in nxopen.features.sheetmetal
-
This enum represents the bend relief type.
- ResizeBendRadiusBuilder.Types - Class in nxopen.features.sheetmetal
-
This enum represents the feature types.
- ResizeBlend - Interface in nxopen.features
-
Represents a resize blend feature , don't use it until nx502
To create or edit an instance of this class, use
ResizeBlendBuilder
Created in NX5.0.2
- ResizeBlendBuilder - Interface in nxopen.features
-
Represents a builder for a resize blend feature, don't use it until nx502.
- ResizeChamfer - Interface in nxopen.features
-
Represents a resize chamfer feature
To create or edit an instance of this class, use
ResizeChamferBuilder
Created in NX7.0.0
- ResizeChamferBuilder - Interface in nxopen.features
-
- ResizeChamferBuilder.SectionType - Class in nxopen.features
-
the chamfer section types
- ResizeChamferCurve - Interface in nxopen.features
-
Represents a resize chamfer curve feature
To create or edit an instance of this class, use
ResizeChamferCurveBuilder
Created in NX10.0.0
- ResizeChamferCurveBuilder - Interface in nxopen.features
-
- ResizeConnectorBuilder - Interface in nxopen.linedesigner
-
To create a new instance of this class, use nxopen.linedesigner.LineDesignerManager#createResizeConnectorBuilder
Default values.
- ResizeCurve - Interface in nxopen.features
-
Represents a resize curve feature
To create or edit an instance of this class, use
ResizeCurveBuilder
Created in NX9.0.0
- ResizeCurveBuilder - Interface in nxopen.features
-
- ResizeCurveBuilder.ValueType - Class in nxopen.features
-
the option for radius or diameter
- resizedEndDistance() - Method in interface nxopen.features.DatumAxisBuilder
-
Returns the resized distance for the end point.
- resizeDuringUpdate() - Method in interface nxopen.features.DatumPlaneBuilder
-
Returns the resize during update
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- resizeDuringUpdate() - Method in interface nxopen.features.ResizePlaneBuilder
-
Returns the flag for resizing a datum plane.
- ResizeFace - Interface in nxopen.features
-
Represents a resize blend feature , don't use it until nx502
To create or edit an instance of this class, use
ResizeFaceBuilder
Created in NX5.0.2
- ResizeFaceBuilder - Interface in nxopen.features
-
Represents a builder for a resize face feature, don't use it until nx502.
- resizeGrid() - Method in interface nxopen.shipdesign.GeneralArrangementManager
-
Resizes the ship grid datum.
- resizeHeightWithDialog() - Method in interface nxopen.blockstyler.ListBox
-
Returns the ResizeHeightWithDialog
License requirements: None.
- resizeHeightWithDialog() - Method in interface nxopen.blockstyler.MultilineString
-
Returns the ResizeHeightWithDialog.
- resizeHeightWithDialog() - Method in interface nxopen.blockstyler.ScrolledWindow
-
Returns the ResizeHeightWithDialog.
- resizeHeightWithDialog() - Method in interface nxopen.blockstyler.SetList
-
Returns the ResizeHeightWithDialog.
- resizeMethod() - Method in interface nxopen.annotations.PmiPreferences
-
Returns the resize method
License requirements: None.
- ResizeNeutralFactor - Interface in nxopen.features
-
Represents a resize neutral factor feature
To create or edit an instance of this class, use
ResizeNeutralFactorBuilder
Created in NX5.0.0
- ResizeNeutralFactorBuilder - Interface in nxopen.features.sheetmetal
-
- resizeOnCreate() - Method in interface nxopen.annotations.PmiPreferences
-
Returns the flag indicating whether to resize on create
License requirements: None.
- resizeOnViewSave() - Method in interface nxopen.annotations.PmiPreferences
-
Returns the flag indicating whether to resize on view save
License requirements: None.
- resizeOption() - Method in interface nxopen.diagramming.SheetElementBuilder
-
Returns the resize option of the sheet element
License requirements: None.
- resizeParameters() - Method in interface nxopen.features.EnlargeBuilder
-
Returns the resize parameters
License requirements: nx_freeform_2 ("advanced freeform modeling")
.
- ResizePlane - Interface in nxopen.features
-
Represents a Resize Datum Plane feature
To create or edit an instance of this class, use
ResizePlaneBuilder
Created in NX6.0.3
- ResizePlaneBuilder - Interface in nxopen.features
-
- resizeRadius() - Method in interface nxopen.tooling.BendOperationBuilder
-
Returns the resize radius.
- resizeRadius() - Method in interface nxopen.tooling.DirectUnbendBuilder
-
Returns the resize radius.
- resizeRowsCols(DisplayableObject[], double) - Method in interface nxopen.annotations.Table
-
Resize rows and columns
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- resolution() - Method in interface nxopen.cae.FluidDomainBuilder
-
Returns the resolution
License requirements: None.
- resolution() - Method in interface nxopen.drawings.ViewCreationWizardBuilder
-
Returns the display quality option
License requirements: None.
- resolution() - Method in interface nxopen.facet.MultiPatchAlignmentBuilder
-
Returns the type indicating number of facets to be used in the alignment.
- resolution() - Method in interface nxopen.features.vehicledesign.ReflectionDataBuilder
-
Returns the resolution type
License requirements: None.
- resolution() - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder
-
Returns the display resolution
License requirements: None.
- resolution() - Method in interface nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder
-
Returns the tesselation resolution to use for curvature color map and contours.
- resolution() - Method in interface nxopen.geometricanalysis.HighlightLinesAnalysisBuilder
-
Returns the resolution.
- resolution() - Method in interface nxopen.geometricutilities.DisplayResolutionBuilder
-
Returns the resolution
License requirements: None.
- resolution - Variable in class nxopen.HumanReachZone.Data
-
Resolution of the reach zone
- resolution() - Method in interface nxopen.ListCreator
-
Returns the m_resolution * - Specifies the resolution type for Level of Detail using NX resolution
License requirements: None.
- resolution - Variable in class nxopen.preferences.SessionVisualizationHighQualityImage.ResolutionData
-
- resolution - Variable in class nxopen.uf.UFDisp.ShadeOptions
-
- ResolutionData() - Constructor for class nxopen.preferences.SessionVisualizationHighQualityImage.ResolutionData
-
- resolutionDensityType() - Method in interface nxopen.cae.CfdLocalResolutionConstraintBuilder
-
Returns the resolution density type
License requirements: None.
- resolveConflictResult(ComparisonResult, ComparisonResultContext.ResolveConflictAction) - Method in interface nxopen.mechatronics.ComparisonResultContext
-
Generates some new results to resolve the conflict
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- resolveConflicts(boolean) - Method in interface nxopen.cae.MeshControlBuilder
-
To resolve conflicting or existing mesh control when creating new mesh controls
if fDoNotOverwriteExisting is false then the existing lower order mesh controls will be overwritten
if it is set to true then the geometry will be removed from creating new mesh control.
- resolveConstraintConflicts() - Method in interface nxopen.cae.SimSolution
-
- resolveOverlap() - Method in interface nxopen.cae.SimBcPlotContoursBuilder
-
- resolveOverlapValue() - Method in interface nxopen.cae.SimBcPlotContoursBuilder
-
Returns a overlap value to plot.
- resolveOverlapValueUnit() - Method in interface nxopen.cae.SimBcPlotContoursBuilder
-
Returns a
Unit
for overlap value to plot.
- resolveRule() - Method in interface nxopen.cae.ConflictResolutionBuilder
-
Returns the resolution rule which will be used to resolve the conflict between the two input BCs
License requirements: None.
- resolveRule() - Method in interface nxopen.cae.ConstraintResolutionBuilder
-
- RESOURCE - Static variable in class nxopen.assemblies.CreateNewComponentBuilder.ComponentCamType
-
Set the component type to resource
- response() - Method in interface nxopen.cae.AfuHeaderId
-
Returns the string to define response direction sense
License requirements: None.
- RESPONSE - Static variable in class nxopen.cae.DurabilityStrainGageAnalyzerBuilder.GageSourceEnum
-
Response
- response() - Method in interface nxopen.cae.optimization.DAOConstraintBuilder
-
Returns the constraint response
License requirements: None.
- response() - Method in interface nxopen.cae.optimization.DAOObjective
-
Returns the objective response
License requirements: None.
- Response - Class in nxopen.cae.optimization
-
Represents the specific variable
- RESPONSE - Static variable in class nxopen.cae.XyFunctionMacroType
-
Function is only used to define a response
- response() - Method in interface nxopen.features.UserDefinedFeatureEditEvent
-
Returns the response
License requirements: None.
- response - Variable in class nxopen.Selection.SelectFeaturesData
-
Ok, Back, or Cancel
- response - Variable in class nxopen.Selection.SelectObjectData
-
Ok, Back, Cancel, ObjectSelected, or ObjectSelectedByName
- response - Variable in class nxopen.Selection.SelectObjectsData
-
Ok, Back, or Cancel
- response - Variable in class nxopen.Selection.SelectScreenPositionData
-
Pick, Back, or Cancel
- response - Variable in class nxopen.Selection.SelectTaggedObjectData
-
Ok, Back, Cancel, ObjectSelected, or ObjectSelectedByName
- response - Variable in class nxopen.Selection.SelectTaggedObjectsData
-
Ok, Back, or Cancel
- response - Variable in class nxopen.uf.UFCambndWedm.AppendItemUdeData
-
- response - Variable in class nxopen.uf.UFModlUi.ShapePatternCreateDialogData
-
- response - Variable in class nxopen.uf.UFUi.AskCreatePartFilenameData
-
- response - Variable in class nxopen.uf.UFUi.AskOpenPartFilenameData
-
- response - Variable in class nxopen.uf.UFUi.CreateFileboxData
-
- response - Variable in class nxopen.uf.UFUi.CreateFileboxWithMultipleFiltersData
-
- response - Variable in class nxopen.uf.UFUi.PointConstructData
-
- response - Variable in class nxopen.uf.UFUi.SelectConeheadData
-
- response - Variable in class nxopen.uf.UFUi.SelectParametersData
-
- response - Variable in class nxopen.uf.UFUi.SelectPointCollectionData
-
- response - Variable in class nxopen.uf.UFUi.SelectRoutingObjectsData
-
- response - Variable in class nxopen.uf.UFUi.SelectRpoDimensionsData
-
- response - Variable in class nxopen.uf.UFUi.SelectSketchDimensionsData
-
- response - Variable in class nxopen.uf.UFUi.SelectTcResultFileToImportData
-
- response - Variable in class nxopen.uf.UFUi.SpecifyPlaneData
-
- response - Variable in class nxopen.uf.UFUi.SpecifyVectorData
-
- response - Variable in class nxopen.uf.UFUi.UgmgrAskCreatePartFileNameData
-
- response1 - Variable in class nxopen.uf.UFUi.MessageButtons
-
- response2 - Variable in class nxopen.uf.UFUi.MessageButtons
-
- response3 - Variable in class nxopen.uf.UFUi.MessageButtons
-
- RESPONSE_SPECTRUM - Static variable in class nxopen.cae.responsesimulation.RSEvent.Type
-
- responseCoordinateSystem() - Method in interface nxopen.cae.responsesimulation.CsdEvaluationSettingBuilder
-
Returns the coordinate system of response elements.
- responseDataLocation() - Method in interface nxopen.cae.responsesimulation.CsdEvaluationSettingBuilder
-
Returns the response element location.
- ResponseDomainDefinitionMethod - Class in nxopen.cae.responsesimulation
-
Specifies response result evaluation options
- responseDomainDefinitionOption() - Method in interface nxopen.cae.responsesimulation.ResponseResultsEvaluationSettingBuilder
-
Returns the method choosed to define response domain
License requirements: nx_response_anlys ("NX Response Analysis")
.
- responseElementDataComponent() - Method in interface nxopen.cae.responsesimulation.CsdEvaluationSettingBuilder
-
Returns the direction data component of response elements.
- responseId() - Method in interface nxopen.cae.AfuHeaderId
-
Returns the ID of response element or node
License requirements: None.
- responseNodeDataComponent() - Method in interface nxopen.cae.responsesimulation.CsdEvaluationSettingBuilder
-
Returns the direction data component of response node.
- ResponseResultsEvaluationSetting - Interface in nxopen.cae.responsesimulation
-
Represents the parameters setting for response results evaluation.
- ResponseResultsEvaluationSettingBuilder - Interface in nxopen.cae.responsesimulation
-
- responseSimulationManager() - Method in interface nxopen.cae.SimSimulation
-
Returns the response simulation manager belonging to this sim part .
- responseSimulationSolution() - Method in interface nxopen.cae.responsesimulation.RSEventBuilder
-
Returns the parent response simulation solution
License requirements: nx_response_anlys ("NX Response Analysis")
.
- responseType() - Method in interface nxopen.cae.responsesimulation.DDAMExcitationBuilder
-
Returns the response type
License requirements: nx_response_anlys ("NX Response Analysis")
.
- responseType() - Method in interface nxopen.cae.responsesimulation.RSEventAttributes
-
Returns the DDAM response type
License requirements: None.
- responseTypeOption() - Method in interface nxopen.cae.responsesimulation.DDAMComponentData
-
Returns the option of response type
License requirements: nx_response_anlys ("NX Response Analysis")
.
- responseUserDefinedDirection() - Method in interface nxopen.cae.responsesimulation.CsdEvaluationSettingBuilder
-
Returns the user defined direction of response nodes.
- responseUsingUserDefinedDirection() - Method in interface nxopen.cae.responsesimulation.CsdEvaluationSettingBuilder
-
Returns the option of using user defined direction of response nodes.
- respositionExisting() - Method in interface nxopen.annotations.BaseOrdinateDimensionBuilder
-
Returns the resposition existing
License requirements: None.
- resSection - Variable in class nxopen.cae.Result.ResultParameters
-
Deprecated.
- REST_DEPTH - Static variable in class nxopen.features.shipdesign.PlateChamferBuilder.OffsetMethod
-
Use rest depth to define ramp
- RESTART - Static variable in class nxopen.mechatronics.MechatronicsSession.SimulationAction
-
Restart
- RESTART_PROPERTY - Static variable in class nxopen.motion.TextBasedElementBuilder.TypeChoices
-
- restartDrag() - Method in interface nxopen.routing.EditLineSegmentBuilder
-
Restart a line drag operation.
- RESTARTFROM_BEGINNING - Static variable in class nxopen.mechatronics.GraphControlBuilder.EndAction
-
restart from the beginning of graph.
- restartIDNumbersWithNewReport() - Method in interface nxopen.drawings.TrackDrawingChangesGeneralBuilder
-
Returns the restart id numbers with new report
License requirements: None.
- restartNumbers() - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
- restDepth() - Method in interface nxopen.features.shipdesign.PlateChamferBuilder
-
Returns the rest depth
License requirements: None.
- restingFace() - Method in interface nxopen.weld.DatumSurfaceBuilder
-
Returns the resting face
License requirements: None.
- restitution() - Method in interface nxopen.mechatronics.CollisionMaterialBuilder
-
Returns the restitution.
- restitution() - Method in interface nxopen.mechatronics.PreferencesBuilder
-
- restitutionCoefficentExpression() - Method in interface nxopen.motion.BodyContactAdams
-
Returns the restitution coefficent expression
License requirements: None.
- restitutionCoefficient() - Method in interface nxopen.motion.AnalyticalContactPropertyBuilder
-
Returns the restitution coefficient
License requirements: mechanisms ("MECHANISMS")
.
- restitutionCoefficient - Variable in class nxopen.uf.UFMotion.Motion3DContact
-
- restitutionExpression() - Method in interface nxopen.mechatronics.PreferencesBuilder
-
Returns the Restitution Expression
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- restore() - Method in interface nxopen.drawings.OrientationViewStyle
-
Removes the associativity to the defined plane (if it existed) and returns
the member view to its orientation with the model with respect to the Absolute
Coordinate System.
- restore() - Method in interface nxopen.drawings.ProjectedViewOrientationBuilder
-
Removes the associativity to the defined plane and x direction vector and restores
the member view to its default orientation.
- restore(String) - Method in interface nxopen.LoadOptions
-
Changes the load options settings to what they are in the specified file
License requirements: None.
- restore() - Method in interface nxopen.View
-
Restores a view to its last remembered rotation, scale and translation.
- restoreAnt - Variable in class nxopen.LoadOptions.BookmarkComponentsToLoadData
-
whether to restore ANT's state
- restoreDefault() - Method in interface nxopen.weld.ExportWeldBuilder
-
Restore default template to update exported attributes.
- restoreDependencies(CAMObject[]) - Method in interface nxopen.cam.CAMSetup
-
Restore dependencies of selected objects
License requirements: cam_base ("CAM BASE")
.
- restoreDisplay(Component) - Method in interface nxopen.features.shipdesign.CompareModeBuilder
-
Restores the display and removes the compare between the Design vs Manufacturing data
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- restoreEngineNodes() - Method in interface nxopen.features.CurveFinderBuilder
-
ReStore all nodes from the Engine On Undo
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- restoreLoadOptions(String) - Method in interface nxopen.uf.UFAssem
-
- restoreObjects(boolean, TaggedObject[]) - Method in interface nxopen.mechatronics.PMNavFolderObject
-
Restore physics objects.
- restoreOption() - Method in interface nxopen.features.PatternFaceBuilder
-
Returns the restore option for absent members.
- restoreOriginalView() - Method in interface nxopen.cam.InspectionGraphicalReportBuilder
-
Restore the original view.
- restoreParentFace() - Method in interface nxopen.features.StudioXformBuilderEx
-
Restore the parent face of a selection face
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- restorePartNumber() - Method in interface nxopen.tooling.CloneObject
-
Restore start number.
- restorePointsAlignment() - Method in interface nxopen.features.MeshSurfaceBuilder
-
Restore the last removed points alignment information if there is one.
- restorePosition() - Method in interface nxopen.tooling.BendOperationBuilder
-
Returns the switch to set whether restore the overbend part position.
- restorePreviousView() - Method in interface nxopen.cam.WorkInstructionBuilder
-
Restore the previous view
License requirements: None.
- restoreSegments() - Method in interface nxopen.features.GuidedExtensionBuilderEx
-
- restoreSegments() - Method in interface nxopen.tooling.GuidedExtensionBuilder
-
- restoreSpreadsheetData() - Method in interface nxopen.features.shipdesign.SteelFeatureSpreadsheetBuilder
-
This method restores parameter data inside the builder.
- restoreTargetProductionUnit(ModelPlantRoot) - Method in interface nxopen.linedesigner.ModelPlantManager
-
Restore Target Production Unit
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- restoreUnpastedObjects() - Method in interface nxopen.annotations.PmiManager
-
Restores the unpasted PMI objects in the part.
- restoreUnpastedObjects() - Method in interface nxopen.DraftingManager
-
Restores unpasted cut objects to their original drawing state
This method is used by NX user interface to restore drafting objects that
were cut but not pasted.
- restoreUnpastedObjectsOfPart(Part) - Method in interface nxopen.DraftingManager
-
Restores unpasted cut objects of the specified part to their original drawing state
License requirements: None.
- restoreView() - Method in interface nxopen.display.DynamicSectionBuilder
-
Restores the section to the saved section in the view database.
- restoreView(Tag) - Method in interface nxopen.uf.UFView
-
- restoreViewBorder() - Method in interface nxopen.drawings.DraftingView
-
Restores the view border from the dashed line to the normal line for cut operation
License requirements: drafting ("DRAFTING")
.
- restoreViewBreaks(DraftingView) - Method in interface nxopen.drawings.DraftingViewCollection
-
- restrainForce() - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder
-
Returns the expression of restraining force.
- restrictAreas() - Method in interface nxopen.cae.optimization.TBSOptimizationSolution
-
Represents the restrict area collection belonging to this optimization solution .
- restrictCrosshatch() - Method in interface nxopen.annotations.LightweightSectionBuilder
-
Returns the restrict crosshatch angle to 45 degree option
License requirements: None.
- restrictCrosshatchAngle() - Method in interface nxopen.annotations.PmiPreferences
-
Returns the flag indicating whether PMI support for lightweight section view restrict crosshatch angle option is available
License requirements: None.
- restrictCrosshatchAngle() - Method in interface nxopen.drawings.SectionViewStyle
-
Returns
License requirements: None.
- restrictCrosshatchAngle() - Method in interface nxopen.drawings.ViewStyleSectionBuilder
-
Returns the restrict crosshatch angle toggle on the SECTION tab of the View Style Dialog
License requirements: None.
- restrictCrosshatchAngle() - Method in interface nxopen.preferences.SectionViewPreferences
-
Returns the status of restrict crosshatch angle.
- restrictedNodes() - Method in interface nxopen.cae.optimization.TBSShapeRestrictAreaBuilder
-
Returns the nodes to react on the restrictions
License requirements: None.
- restrictThicknessToMaterial() - Method in interface nxopen.features.shipdesign.PlateStockBuilder
-
Returns the flag that indicates if thickness specification should be restricted to that defined in the material data base.
- RESTRIKE - Static variable in class nxopen.die.ThroatChildBuilder.TypeOption
-
Throat section is built for a restrike operation.
- RESTRIKE - Static variable in class nxopen.die.ThroatParentBuilder.TypeOption
-
Throat is built for a restrike operation.
- restructureComponents(Component[], Component, boolean) - Method in interface nxopen.assemblies.ComponentAssembly
-
Given an array of components and a specified parent this function will transfer the given components to the parent.
- RestructureComponentsData() - Constructor for class nxopen.assemblies.ComponentAssembly.RestructureComponentsData
-
- restructureObject(SystemObject) - Method in interface nxopen.mechatronics.SystemObject
-
Restructure system object.
- result - Variable in class nxopen.assemblies.DegreesOfFreedom
-
The success or otherwise of the degrees of freedom calculation
- RESULT - Static variable in class nxopen.cae.Post.AnimationType
-
- result - Variable in class nxopen.cae.Post.ResultForPostviewData
-
Result
which defines input postview
- RESULT - Static variable in class nxopen.cae.Post.Threshold
-
- RESULT - Static variable in class nxopen.cae.PostAnnotation.ValueType
-
- result() - Method in interface nxopen.cae.PostJtExportBuilder
-
Returns the result of the builder
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- Result - Interface in nxopen.cae.qualityaudit
-
The Quality Audit Result class offers means to access information about specific problems found while performing specific quality audit checks.
- Result - Interface in nxopen.cae
-
This class provides interfaces to query analysis results.
- RESULT - Static variable in class nxopen.cae.Result.CoordinateSystemSource
-
identifies a coordinate system in the result
- result() - Method in interface nxopen.cae.ResultMeasure
-
Returns the result measure result value
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- result() - Method in interface nxopen.cae.SmoothOptResultsBuilder
-
Returns the result
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- RESULT - Static variable in class nxopen.motion.ResultMeasure.InterferenceType
-
Result measure for interference result
- result - Variable in class nxopen.sim.IsvControlPanelBuilder.DetailData
-
- Result.AskResultLoadcaseValueData - Class in nxopen.cae
-
- Result.AskResultTypesData - Class in nxopen.cae
-
- Result.Averaging - Class in nxopen.cae
-
Averaging structure to specify averaging options
- Result.BeamEnd - Class in nxopen.cae
-
Value type for beam end
- Result.Complex - Class in nxopen.cae
-
Complex options
- Result.Component - Class in nxopen.cae
-
Result components
- Result.ComputationType - Class in nxopen.cae
-
types for different way of computing nodal result from element nodal result.
- Result.CoordinateSystem - Class in nxopen.cae
-
Coordinate systems
- Result.CoordinateSystemSource - Class in nxopen.cae
-
Source of selected coordinate system
- Result.DataType - Class in nxopen.cae
-
Result data types
- Result.DbScale - Class in nxopen.cae
-
dB scales
- Result.DeformationParameters - Class in nxopen.cae
-
- Result.DeformationScale - Class in nxopen.cae
-
Deformation scales
- Result.DiscontinuityMethod - Class in nxopen.cae
-
methods for different way of computing discontinuities in element nodal results
- Result.ElementValue - Class in nxopen.cae
-
Element-value structure to specify element value options
- Result.ElementValueCriterion - Class in nxopen.cae
-
Element-value criterions
- Result.Filetype - Class in nxopen.cae
-
The result file type
- Result.GroupContainer - Class in nxopen.cae
-
Group Containers
- Result.InitialDeformationSelection - Class in nxopen.cae
-
The initial deformation selection type which will decide how the final calculations
will happen after applying the initial deformation on the main deforamtion.
- Result.LoadcaseValueType - Class in nxopen.cae
-
Value type for result load case
- Result.Location - Class in nxopen.cae
-
Result locations
- Result.Quantity - Class in nxopen.cae
-
Result quantities
- Result.ResultBasicUnit - Class in nxopen.cae
-
The basic units system for a result
- Result.ResultCoordinateSystemDefinitionData - Class in nxopen.cae
-
- Result.ResultParameters - Class in nxopen.cae
-
- Result.ResultSection - Class in nxopen.cae
-
Result Section structure to specify a result section for beams and shells
- Result.Section - Class in nxopen.cae
-
Result sections
- Result.SolutionType - Class in nxopen.cae
-
The result solution type
- Result.SuperElementRep - Class in nxopen.cae
-
Super Element Representations
- Result.TensorDerivedAbsolute - Class in nxopen.cae
-
This enumeration defines the methods that can be used when calculating absolute values for the following derived components of
Result.DataType.TENSOR
Result.Component.DETERMINANT
,
Result.Component.MEAN
,
Result.Component.MAXIMUM_SHEAR
,
Result.Component.MINIMUM_PRINCIPAL
,
Result.Component.MIDDLE_PRINCIPAL
,
Result.Component.MAXIMUM_PRINCIPAL
,
Result.Component.OCTAHEDRAL
Result.TensorDerivedAbsolute.ALL_COMPONENTS
will make all tensor primary components (XX, YY, ZZ, XY, YZ, ZX)
to absolute and then calculate derived component.
- Result.Type - Class in nxopen.cae
-
Result type structure to specify a result dataset
- Result.VelocityParameters - Class in nxopen.cae
-
Velociy parameter structure to specify result state for the
velocity field used in streamline extraction
- RESULT_AND_ENTITY - Static variable in class nxopen.cae.PostAnnotation.ValueType
-
- RESULT_CONTAINER - Static variable in class nxopen.cae.ftk.DataManager.FileContainerType
-
Solution result container which has the same name with the solution
- RESULT_FROM_LOG_FILE - Static variable in class nxopen.validate.Parser.DataSourceTypes
-
Result from Log File
- RESULT_FROM_NXCHECKS - Static variable in class nxopen.validate.Parser.DataSourceTypes
-
Result from NX checks
- RESULT_FROM_PART - Static variable in class nxopen.validate.Parser.DataSourceTypes
-
Result from part
- RESULT_FROM_TEAMCENTER - Static variable in class nxopen.validate.Parser.DataSourceTypes
-
Result from Teamcenter
- RESULT_MEASURE - Static variable in class nxopen.cae.optimization.Response
-
Response type is a result measure
- RESULT_PATH - Static variable in class nxopen.cae.DurabilityStaticEventBuilder.ExcitationTypeEnum
-
Result Path
- RESULT_PERCENT - Static variable in class nxopen.cae.Post.MarkHide
-
- RESULT_VALUE - Static variable in class nxopen.cae.Post.MarkColor
-
- RESULT_VALUE - Static variable in class nxopen.cae.Post.MarkHide
-
- RESULT_VALUE - Static variable in class nxopen.cae.Post.MarkSize
-
- RESULT_VALUE - Static variable in class nxopen.cae.Post.StreamlineColor
-
- ResultAccess - Interface in nxopen.cae
-
Represents a specific result state for a given
Result
.
- ResultAccess.AskElementNodalResultAllComponentsData - Class in nxopen.cae
-
- ResultAccess.AskElementNodalResultData - Class in nxopen.cae
-
- ResultAccess.AskMinMaxLocationData - Class in nxopen.cae
-
- ResultAccess.AskNMinMaxLocationData - Class in nxopen.cae
-
- ResultAccess.AskResultComponentsData - Class in nxopen.cae
-
- resultantCurveLocator() - Method in interface nxopen.cae.QueryCurveUsageOptions
-
Returns the resultant curve locator
License requirements: None.
- resultantLocationTolerance() - Method in interface nxopen.cae.QueryCurveUsageOptions
-
Returns the resultant location tolerance
License requirements: None.
- ResultBasicUnit() - Constructor for class nxopen.cae.Result.ResultBasicUnit
-
- ResultBasicUnit(Unit, Unit, Unit, Unit, Unit, Unit) - Constructor for class nxopen.cae.Result.ResultBasicUnit
-
Constructor for the ResultBasicUnit object.
- resultCategory() - Method in interface nxopen.mechatronics.ComparisonResult
-
Returns the category from the comparison result
License requirements: None.
- ResultCategory - Interface in nxopen.visualreporting
-
- resultcodes - Variable in class nxopen.pdm.FileManagement.ExportFilesData
-
Result codes.
- ResultCoordinateSystemDefinitionData() - Constructor for class nxopen.cae.Result.ResultCoordinateSystemDefinitionData
-
- ResultFileData() - Constructor for class nxopen.cae.SimResultReference.ResultFileData
-
- ResultFileData() - Constructor for class nxopen.cae.SimSolution.ResultFileData
-
- resultfiledir - Variable in class nxopen.cae.SimResultReference.ResultFileData
-
directly path where result file is stored
- resultfiledir - Variable in class nxopen.cae.SimSolution.ResultFileData
-
directly path where result file is stored
- resultFileFolder() - Method in interface nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder
-
Returns the result file folder
License requirements: None.
- resultFilteringOption() - Method in interface nxopen.cae.optimization.TBSSmoothBuilder
-
Returns the result filtering option
License requirements: None.
- ResultForPostviewData() - Constructor for class nxopen.cae.Post.ResultForPostviewData
-
- resultingBodies - Variable in class nxopen.uf.UFModeling.IntersectBodiesData
-
- resultingBodies - Variable in class nxopen.uf.UFModeling.SubtractBodiesData
-
- ResultingFacePairs() - Constructor for class nxopen.uf.UFSf.ResultingFacePairs
-
- ResultingFacePairs(Tag, Tag, UFSf.FaceSubdivStatus) - Constructor for class nxopen.uf.UFSf.ResultingFacePairs
-
- resultingPairs - Variable in class nxopen.uf.UFSf.CreateAutoFaceSubdivData
-
- resultingPairsCount - Variable in class nxopen.uf.UFSf.CreateAutoFaceSubdivData
-
- resultingPlotOption - Variable in class nxopen.uf.UFPlot.UghpglCmpOptions
-
- ResultManager - Interface in nxopen.cae
-
Manages results
To obtain an instance of this class, refer to
Session
Created in NX6.0.2
- resultManager() - Method in interface nxopen.Session
-
Returns the
ResultManager
belonging to this session
Created in NX6.0.2
- ResultManager.IterationsWithLimitsData - Class in nxopen.cae
-
- resultMeasure() - Method in interface nxopen.cae.optimization.DAOConstraintBuilder
-
Returns the result measure
License requirements: None.
- resultMeasure() - Method in interface nxopen.cae.optimization.DAOObjective
-
Returns the result measure
License requirements: None.
- ResultMeasure - Interface in nxopen.cae
-
- ResultMeasure - Interface in nxopen.motion
-
Represents a result measure motion object
To create or edit an instance of this class, use
ResultMeasureBuilder
Created in NX11.0.0
- ResultMeasure.InterferenceType - Class in nxopen.motion
-
Result measure interference result type
- ResultMeasure.Operation - Class in nxopen.cae
-
Operation type
- ResultMeasure.ResultType - Class in nxopen.motion
-
Result measure result type
- ResultMeasure.SubsetSelection - Class in nxopen.cae
-
Model subset selection type
- ResultMeasureBuilder - Interface in nxopen.motion
-
- ResultMeasureCollection - Interface in nxopen.cae
-
Provides methods for managing ResultMeasures
ResultMeasure
To obtain an instance of this class, refer to
SimSimulation
Created in NX8.0.0
- ResultMeasureCollection - Interface in nxopen.motion
-
Represents a collection of result measure objects
To obtain an instance of this class, refer to
MotionManager
Created in NX11.0.0
- ResultMeasureModelSubset - Interface in nxopen.cae
-
Represents a a subset of the model upon which to calculate results
This is an abstract class, and cannot be created.
- ResultMeasureModelSubsetFE - Interface in nxopen.cae
-
Represents a FE-based subset of the model upon which to calculate results
To obtain an instance of this class use
ResultMeasureCollection
.
- ResultMeasureModelSubsetGeom - Interface in nxopen.cae
-
Represents a geometry-based subset of the model upon which to calculate results
To obtain an instance of this class use
ResultMeasureCollection
.
- ResultMeasureResultAllOptions - Interface in nxopen.cae
-
Represents the combination of all result options for result measure
To obtain an instance of this class use
ResultMeasureCollection
.
- ResultMeasureResultDirectionOptions - Interface in nxopen.cae
-
Represents the result directional options for result measure
To obtain an instance of this class use
ResultMeasureCollection
.
- ResultMeasureResultDirectionSectionOptions - Interface in nxopen.cae
-
Represents the result directional and beam/shell section options for result measure
To obtain an instance of this class use
ResultMeasureCollection
.
- ResultMeasureResultOptions - Interface in nxopen.cae
-
Represents the basic result options for result measure
To obtain an instance of this class use nxopen.CAE#resultMeasureCollection
.
- ResultMeasureResultSectionOptions - Interface in nxopen.cae
-
Represents the result with beam/shell section options for result measure
To obtain an instance of this class use CAE#resultMeasureCollection
.
- resultMeasures() - Method in interface nxopen.cae.SimSimulation
-
Returns the CAE ResultMeasure collection belonging to this sim part .
- resultMeasures() - Method in interface nxopen.motion.MotionManager
-
- resultName() - Method in interface nxopen.mechatronics.ComparisonResult
-
Returns the name from the comparison result
License requirements: None.
- resultName() - Method in interface nxopen.mechatronics.MATLABSignalConnectionBuilder
-
Returns the mapping result name.
- resultName() - Method in interface nxopen.mechatronics.SHMSignalConnectionBuilder
-
Returns the mapping result name.
- resultName() - Method in interface nxopen.mechatronics.SignalConnectionBuilder
-
Returns the mapping result name.
- resultnames - Variable in class nxopen.cae.LaminatePostReportBuilder.SelectedResultsData
-
- ResultObject - Interface in nxopen.validate
-
Represents a check-mate result object.
- ResultObject.ResultTypes - Class in nxopen.validate
-
The type of check result
- resultOption() - Method in interface nxopen.cae.AxiSymmetricParameters
-
Returns the result option enum
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- resultOption() - Method in interface nxopen.cae.CyclicSymmetricParameters
-
Returns the result option enum
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- ResultParameters() - Constructor for class nxopen.cae.Result.ResultParameters
-
Deprecated.
- ResultParameters(int, int, Result.Type, Result.Component, Result.ResultSection, int, int, int, Result.Averaging, boolean, Result.CoordinateSystem, boolean, Result.ElementValue, Result.Complex, double, boolean, double, Unit, boolean, boolean, double) - Constructor for class nxopen.cae.Result.ResultParameters
-
Deprecated.
Constructor for the ResultParameters object.
- ResultParameters - Interface in nxopen.cae
-
This class is worked as a packet of information that can be either be used to change result state or pass around for information exchange between two
ResultAccess
objects.
- ResultParameters.AskSectionPlyLayerData - Class in nxopen.cae
-
- ResultParameters.SelectedCoordinateSystemData - Class in nxopen.cae
-
- ResultParametersWithNodalForceReport - Interface in nxopen.cae
-
- ResultParametersWithNodalForceReport.ResultType - Class in nxopen.cae
-
Post View result type options
- ResultParametersWithProbe - Interface in nxopen.cae
-
- resultParamter - Variable in class nxopen.cae.Post.ResultForPostviewData
-
- resultpoints - Variable in class nxopen.motion.MotionSolution.GraphObjectResultData
-
Need to free it
- ResultProbe - Interface in nxopen.cae
-
Result Probe Object.
- ResultProbe.OutputOption - Class in nxopen.cae
-
Probe output options
- ResultProbeBuilder - Interface in nxopen.cae
-
Result probe Builder
An instance of this class can not be obtained
Default values.
- ResultProbeBuilder.CombineAcrossEntities - Class in nxopen.cae
-
Options to combine multiple geometry values
- ResultProbeBuilder.CombineAcrossIterations - Class in nxopen.cae
-
Iteration combination types
- ResultProbeBuilder.EdgeIntegral - Class in nxopen.cae
-
- ResultProbeBuilder.ErrorHandling - Class in nxopen.cae
-
Options to handel errornious conditions
- ResultProbeBuilder.FaceIntegral - Class in nxopen.cae
-
- ResultProbeBuilder.GeometryValue - Class in nxopen.cae
-
Options to combine geometry value
- ResultProbeBuilder.IterationSelection - Class in nxopen.cae
-
Iteration definition method
- ResultProbeBuilder.IterationType - Class in nxopen.cae
-
Iteration type filter
- ResultProbeBuilder.LoadcaseSelection - Class in nxopen.cae
-
Loadcase definition method
- ResultProbeBuilder.NodalCombination - Class in nxopen.cae
-
Options to combine multiple geometry values
- ResultProbeBuilder.SelectionType - Class in nxopen.cae
-
Type of objects where probe value will be calculated
- ResultProbeBuilder.SuperIterType - Class in nxopen.cae
-
Super iteration definition method
- resultReferenceCount() - Method in interface nxopen.cae.SimSolution
-
Returns the number of Result References
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- resultReferenceType() - Method in interface nxopen.cae.ResultProbeBuilder
-
Returns the result reference type
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- RESULTS - Static variable in class nxopen.assemblies.ClearanceSet.CopyMode
-
- results() - Method in interface nxopen.die.UncutRegionsBuilder
-
Returns the side of the curve to show the results.
- results - Variable in class nxopen.uf.UFMotion.AskAccelerationResultsData
-
- results - Variable in class nxopen.uf.UFMotion.AskForceResultsData
-
- results - Variable in class nxopen.uf.UFMotion.AskRotDisplacementResultsData
-
- results - Variable in class nxopen.uf.UFMotion.AskTorqueResultsData
-
- results - Variable in class nxopen.uf.UFMotion.AskTransDisplacementResultsData
-
- results - Variable in class nxopen.uf.UFMotion.AskVelocityResultsData
-
- results - Variable in class nxopen.uf.UFSmd.ChkStdResults
-
- resultsAutoUpdate() - Method in interface nxopen.validate.ValidatorOptions
-
Returns the configuration of results auto update when work part change
License requirements: None.
- ResultsCombinationBuilder - Interface in nxopen.cae
-
- ResultsCombinationBuilder.EvaluationError - Class in nxopen.cae
-
evaluation error options
- ResultsCombinationBuilder.IncompatibleResults - Class in nxopen.cae
-
Incompatible results options
- ResultsCombinationBuilder.NoData - Class in nxopen.cae
-
No data options
- ResultsCombinationBuilder.Output - Class in nxopen.cae
-
output types
- ResultsData() - Constructor for class nxopen.cam.NCAssistantBuilder.ResultsData
-
- ResultSection() - Constructor for class nxopen.cae.Result.ResultSection
-
- ResultSection(Result.Section, Result.Section) - Constructor for class nxopen.cae.Result.ResultSection
-
Constructor for the ResultSection object.
- ResultsEnvelopeBuilder - Interface in nxopen.cae
-
- ResultsEnvelopeBuilder.IncompatibleResults - Class in nxopen.cae
-
Incompatible results options
- ResultsEnvelopeBuilder.NoData - Class in nxopen.cae
-
No data options
- ResultsEnvelopeBuilder.Operation - Class in nxopen.cae
-
Operation
- ResultsEnvelopeBuilder.Output - Class in nxopen.cae
-
output types
- ResultsManipulationBuilder - Interface in nxopen.cae
-
- ResultsManipulationBuilder.Action - Class in nxopen.cae
-
- ResultsManipulationBuilder.ElementValueAtNode - Class in nxopen.cae
-
Value at Nodes for element nodal values
- ResultsManipulationBuilder.OutputResultType - Class in nxopen.cae
-
Output result types
- ResultsManipulationBuilder.ResultAppendMethod - Class in nxopen.cae
-
Result Append Method options
- ResultsManipulationBuilder.UnitsSystem - Class in nxopen.cae
-
Units system options
- ResultsModelExportBuilder - Interface in nxopen.cae
-
- resultsOption() - Method in interface nxopen.tooling.FlowDisplayBuilder
-
Returns the analysis results option to display
License requirements: None.
- resultSourceTag() - Method in interface nxopen.cae.DurabilityEventBuilder
-
Returns the source of results for the event.
- ResultsReductionBuilder - Interface in nxopen.cae
-
- ResultsReductionBuilder.EvaluationError - Class in nxopen.cae
-
evaluation error options
- ResultsReductionBuilder.IncompatibleResults - Class in nxopen.cae
-
Incompatible results options
- ResultsReductionBuilder.NoData - Class in nxopen.cae
-
No data options
- ResultsReductionBuilder.Output - Class in nxopen.cae
-
output types
- resultStatus - Variable in class nxopen.cam.FeatureProcessBuilder.CreateFeatureProcessesData
-
Result status of creating processes.
- resultStatus - Variable in class nxopen.cam.FeatureProcessBuilder.RecreateFeatureProcessesData
-
Result status of creating processes.
- resultString() - Method in interface nxopen.ame.ObjectConnectionBuilder
-
Returns the result string text
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- resultString() - Method in interface nxopen.ame.ObjectConnectionDetailBuilder
-
Returns the result string text
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- resultType() - Method in interface nxopen.cae.PostJtExportBuilder
-
Returns the result type of the builder
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- resultType() - Method in interface nxopen.cae.responsesimulation.FunctionEvaluationSettingBuilder
-
Returns the result type
License requirements: nx_response_anlys ("NX Response Analysis")
.
- resultType() - Method in interface nxopen.cae.responsesimulation.PrlResultsEvaluationSettingBuilder
-
Returns the result type
License requirements: nx_response_anlys ("NX Response Analysis")
.
- resultType() - Method in interface nxopen.cae.responsesimulation.StrainGageBuilder
-
Returns the result type of strain gage
License requirements: nx_response_anlys ("NX Response Analysis")
.
- resultType() - Method in interface nxopen.cae.ResultProbeBuilder
-
Returns the output result type value
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- ResultType - Interface in nxopen.cae
-
This class represents a result type from a result file.
- resultType() - Method in interface nxopen.die.SpringbackCompensationBuilder
-
Returns the type of output to generate.
- resultType() - Method in interface nxopen.mechatronics.ComparisonResult
-
Returns the type from the comparison result
License requirements: None.
- resultType() - Method in interface nxopen.motion.ResultMeasureBuilder
-
Returns the result type
License requirements: mechanisms ("MECHANISMS")
.
- ResultVariable - Interface in nxopen.cae
-
Controls Result Exp Object.
- ResultVariable.NodalCombination - Class in nxopen.cae
-
Element Nodal Combination Options
- ResultXmlFileWriter - Interface in nxopen.report
-
Contains methods for adding document data and generating result XML file
for CAE Report.
- RESUME - Static variable in class nxopen.mechatronics.MechatronicsSession.SimulationAction
-
Resume
- resume() - Method in interface nxopen.MovieManager
-
Resumes movie recording
License requirements: None.
- resumeCreateToolbar() - Method in interface nxopen.uf.UFUi
-
- resumeInitAppstate() - Method in interface nxopen.uf.UFUi
-
- resumeRemoveToolbar() - Method in interface nxopen.uf.UFUi
-
- resyncWithLibraryDefinition() - Method in interface nxopen.PhysicalMaterial
-
Re-synchronizes a loaded library material to match its latest library definition.
- RETAIN - Static variable in class nxopen.facet.FeatureExtractionBuilder.InputActions
-
Retain the input facet bodies
- RETAIN - Static variable in class nxopen.features.StudioSplineBuilder.CurveOption
-
Deprecated.
Retain input curve
- RETAIN - Static variable in class nxopen.features.TrimAndExtendBuilder.ArrowSideType
-
- RETAIN - Static variable in class nxopen.features.TrimExtendBuilder.ArrowSideOptions
-
Retain
- RETAIN - Static variable in class nxopen.geometricutilities.CurveOptions.InputCurve
-
Retains the original input curve and creates the new output curve
- RETAIN - Static variable in class nxopen.routing.RoutingBulkReplacementBuilderReplacementMethodType
-
Keep the original object, no replacement is performed
- RETAIN - Static variable in class nxopen.uf.UFClone.Action
-
- RETAIN_TRANSIENCE - Static variable in class nxopen.Session.TransientPartPolicy
-
Retain transient status when non-retainable mods made
- retainAnnotations() - Method in interface nxopen.preferences.PartDrafting
-
Returns the flag indicating whether to retain
Annotation
objects
when the geometry they are attached to is deleted.
- retainCollector() - Method in interface nxopen.cae.ElementExtrudeBuilder
-
Returns the the flag which decides whether collectors are to be retained or not
License requirements: None.
- retainCollector() - Method in interface nxopen.cae.ElementRevolveBuilder
-
Returns the the flag which decides whether collectors are to be retained or not
License requirements: None.
- retainDimensions() - Method in interface nxopen.preferences.SessionSketch
-
- retained - Variable in class nxopen.uf.UFPd.ProductDefinition
-
- retainedAnnotations() - Method in interface nxopen.drafting.PreferencesBuilder
-
Returns the General Retained Annotations builder
License requirements: None.
- RetainedAnnotationsBuilder - Interface in nxopen.annotations
-
- retainedFaces - Variable in class nxopen.uf.UFModl.SimplData
-
- retainedWelds() - Method in interface nxopen.weld.ConnectedFaceFinderBuilder
-
Returns the retained weld objects that need to be reconnected.
- retainElementType() - Method in interface nxopen.cae.ElementTypeBuilder
-
Returns the option which prevents multiple mesh edit from modifying the
element type of individual meshes
License requirements: nx_masterfem ("Finite Element Modeling")
.
- retainFidelityCheckingInformation() - Method in interface nxopen.preferences.SessionNXGateway
-
Returns the retain fidelity checking information flag for I-DEAS
License requirements: None.
- retainRecipeFlag() - Method in interface nxopen.cae.AutoBCBuilder
-
Returns the retain recipe flag, which signifies whether or not the
recipe will be retained after the generation of the BCs
License requirements: None.
- retainStringValue() - Method in interface nxopen.blockstyler.FileSelection
-
Returns the RetainStringValue
License requirements: None.
- retainStringValue() - Method in interface nxopen.blockstyler.FolderSelection
-
Returns the RetainStringValue
License requirements: None.
- retainTarget() - Method in interface nxopen.features.BooleanBuilder
-
Returns the retain target flag
License requirements: None.
- retainTargetBody - Variable in class nxopen.uf.UFModeling.AskBooleanWithRetainedOptionsData
-
- retainTool() - Method in interface nxopen.features.BooleanBuilder
-
Returns the retain tool flag
License requirements: None.
- retainToolBody - Variable in class nxopen.uf.UFModeling.AskBooleanWithRetainedOptionsData
-
- retainValue() - Method in interface nxopen.blockstyler.DoubleBlock
-
Returns the RetainValue
License requirements: None.
- retainValue() - Method in interface nxopen.blockstyler.DoubleTable
-
Returns the RetainValue.
- retainValue() - Method in interface nxopen.blockstyler.Enumeration
-
Returns the RetainValue
License requirements: None.
- retainValue() - Method in interface nxopen.blockstyler.ExpressionBlock
-
Returns the RetainValue.
- retainValue() - Method in interface nxopen.blockstyler.IntegerBlock
-
Returns the RetainValue
License requirements: None.
- retainValue() - Method in interface nxopen.blockstyler.IntegerTable
-
Returns the RetainValue.
- retainValue() - Method in interface nxopen.blockstyler.MultilineString
-
Returns the RetainValue
License requirements: None.
- retainValue() - Method in interface nxopen.blockstyler.ObjectColorPicker
-
Returns the RetainValue.
- retainValue() - Method in interface nxopen.blockstyler.RGBColorPicker
-
Returns the RetainValue.
- retainValue() - Method in interface nxopen.blockstyler.StringBlock
-
Returns the RetainValue
License requirements: None.
- retainValue() - Method in interface nxopen.blockstyler.TabControl
-
Returns the RetainValue
License requirements: None.
- retainValue() - Method in interface nxopen.blockstyler.Table
-
Returns the RetainValue.If true, the block's value will be saved in dialog memory upon OK, Apply or Close.
- retainValue() - Method in interface nxopen.blockstyler.Toggle
-
Returns the RetainValue
License requirements: None.
- retCount - Variable in class nxopen.uf.UFAssem.AskRefSetMembersData
-
- RETRACE - Static variable in class nxopen.geometricutilities.PlayButtonsBuilder.PlayModeValues
-
- RETRACE - Static variable in class nxopen.motion.PlayMode
-
Retrace mode
- RETRACT - Static variable in class nxopen.cam.CamOperationMotionType
-
- RETRACT - Static variable in class nxopen.cam.CamPathMotionType
-
- RETRACT - Static variable in class nxopen.cam.CutParametersActionWhenGougingTypes
-
Retract
- RETRACT - Static variable in class nxopen.cam.DmRotaryFloorFinishBuilder.GougeActionTypes
-
Retract
- RETRACT - Static variable in class nxopen.cam.DmSurfBuilder.GougeActionType
-
Retract
- RETRACT - Static variable in class nxopen.cam.MoveBuilder.Motion
-
Retract
- retract() - Method in interface nxopen.cam.NcmHoleMachining
-
Returns the retract settings
License requirements: None.
- retract() - Method in interface nxopen.cam.PathDisplayColors
-
Returns the color retract
License requirements: None.
- RETRACT - Static variable in class nxopen.cam.ToolPathTiltAvoidance.MethodType
-
Avoidance method: retract
- RETRACT_TRAVERSE_ENGAGE - Static variable in class nxopen.cam.NcmTransferBuilder.LongMotionTypes
-
retract traverse engage smooth motion type
- retractAgainstCheckBuilder() - Method in interface nxopen.cam.NcmScBuilder
-
Returns the against check retract settings
License requirements: None.
- retractAngle() - Method in interface nxopen.cam.PlungeMillingBuilder
-
Returns the Retract Out Angle builder (inheritable double)
License requirements: None.
- retractAreaBuilder() - Method in interface nxopen.cam.NcmPlanarBuilder
-
Returns the retract area builder
License requirements: None.
- retractBuilder() - Method in interface nxopen.cam.NcmTurnThreadBuilder
-
Returns the Retract builder
License requirements: None.
- retractBuilder() - Method in interface nxopen.cam.TeachmodeRetractSettingsBuilder
-
Returns the retract parameters builder
License requirements: None.
- retractDist() - Method in interface nxopen.cam.InspectionMeasurePointBuilder
-
Returns the builder for retract distance
License requirements: None.
- retractDist() - Method in interface nxopen.cam.InspectionPolarGridBuilder
-
Returns the retract distance
License requirements: None.
- retractDist() - Method in interface nxopen.cam.InspectionScanArcBuilder
-
Returns the builder for retract distance
License requirements: None.
- retractDist() - Method in interface nxopen.cam.InspectionScanCurve5AxisBuilder
-
Returns the builder for retract distance
License requirements: None.
- retractDist() - Method in interface nxopen.cam.InspectionScanCurveBuilder
-
Returns the builder for retract distance
License requirements: None.
- retractDist() - Method in interface nxopen.cam.InspectionScanHelixBuilder
-
Returns the builder for retract distance
License requirements: None.
- retractDist() - Method in interface nxopen.cam.InspectionScanLineBuilder
-
Returns the builder for retract distance
License requirements: None.
- retractDist() - Method in interface nxopen.cam.InspectionUVGridBuilder
-
Returns the retract distance
License requirements: None.
- retractDistance() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns the retract distance
License requirements: None.
- retractDistance() - Method in interface nxopen.cam.InspectionMoveBuilder
-
Returns the retract distance
License requirements: None.
- retractDistance() - Method in interface nxopen.cam.OperationBuilder
-
Returns the Retract Distance builder (inheritable double)
License requirements: None.
- retractDistanceOnToolAxisChange() - Method in interface nxopen.cam.OperationBuilder
-
Returns the Retract Distance on Tool Axis Change builder (inheritable double)
License requirements: None.
- retractFinalBuilder() - Method in interface nxopen.cam.NcmPlanarBuilder
-
Returns the final retract builder
License requirements: None.
- retractFinalBuilder() - Method in interface nxopen.cam.NcmScBuilder
-
Returns the final retract settings
License requirements: None.
- retractFirstPlungeBuilder() - Method in interface nxopen.cam.NcmTurnRoughBuilder
-
Returns the First Plunge Retract builder
License requirements: None.
- retractLevelBlankBuilder() - Method in interface nxopen.cam.NcmTurnRoughBuilder
-
Returns the Level Blank Retract builder
License requirements: None.
- retractLevelPartBuilder() - Method in interface nxopen.cam.NcmTurnRoughBuilder
-
Returns the Level Part Retract builder
License requirements: None.
- retractOpenAreaBuilder() - Method in interface nxopen.cam.NcmScBuilder
-
Returns the open area retract settings
License requirements: None.
- retractOutputMode() - Method in interface nxopen.cam.HoleDrillingBuilder
-
Returns the canned rettract output
License requirements: None.
- retractPlungeBuilder() - Method in interface nxopen.cam.NcmTurnRoughBuilder
-
Returns the Plunge Retract builder
License requirements: None.
- retractPoint() - Method in interface nxopen.cam.WedmBasedGeomBuilder
-
Returns the Retract Point
License requirements: cam_base ("CAM BASE")
.
- retractPoint() - Method in interface nxopen.cam.WedmGeomBuilder
-
Returns the retract point
License requirements: cam_base ("CAM BASE")
.
- retractPointBuilder() - Method in interface nxopen.cam.WedmOperationBuilder
-
Returns the retract_point Builder
License requirements: cam_base ("CAM BASE")
.
- retractPointStatus() - Method in interface nxopen.cam.WedmBasedGeomBuilder
-
Returns the Retract Point Status
License requirements: cam_base ("CAM BASE")
.
- retractPointToolAxis() - Method in interface nxopen.cam.WedmBasedGeomBuilder
-
Returns the Retract Point Tool Axis
License requirements: cam_base ("CAM BASE")
.
- retractProfileBuilder() - Method in interface nxopen.cam.NcmTurnRoughFinishBuilder
-
Returns the Profiling Retract builder
License requirements: None.
- retractSpeed() - Method in interface nxopen.cam.FeedsBuilder
-
Returns the Retract Speed
License requirements: cam_base ("CAM BASE")
.
- retractSpeedToggle() - Method in interface nxopen.cam.FeedsBuilder
-
Returns the Retract Speed Toggle
License requirements: None.
- retractType() - Method in interface nxopen.cam.NcmLaserRetract
-
Returns the Retract Type
License requirements: None.
- retractValue() - Method in interface nxopen.cam.CycleStepRetract
-
Returns the step retract value
License requirements: cam_base ("CAM BASE")
.
- retrievalStatus - Variable in class nxopen.uf.UFPatt.AskData
-
- retrieve(String) - Method in interface nxopen.uf.UFCutter
-
- retrieve(String) - Method in interface nxopen.uf.UFMct
-
- retrieveColors() - Method in interface nxopen.PlotColorsWidthsBuilder
-
Retrieve drawing sheet colors
License requirements: None.
- retrieveDevice(String) - Method in interface nxopen.cam.CAMSetup
-
Retrieve a device from library
License requirements: None.
- retrieveDevice(String) - Method in interface nxopen.cam.InspectionSetup
-
Retrieve a device from library
License requirements: None.
- retrieveDrawingCgm(String) - Method in interface nxopen.uf.UFDraw
-
- RetrieveDrawingCgmData() - Constructor for class nxopen.uf.UFDraw.RetrieveDrawingCgmData
-
- retrieveHolder(String) - Method in interface nxopen.cam.Tool
-
Retrieve holder
License requirements: None.
- retrieveLibraryMaterial(String) - Method in interface nxopen.uf.UFSf
-
- retrievePathMessages(CAMObject[]) - Method in interface nxopen.cam.InspectionSetup
-
Retrieve toolpath validation messages
License requirements: None.
- retrieveSheet(String) - Method in interface nxopen.tooling.AssemblyDrawingBuilder
-
Retrieve the sheet
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- retrieveTool(String) - Method in interface nxopen.cam.CAMSetup
-
Retrieve a tool from library
License requirements: None.
- retrieveTool(String, CAMObject) - Method in interface nxopen.cam.CAMSetup
-
Retrieve a tool from library to the target
License requirements: None.
- retrieveTool(String) - Method in interface nxopen.cam.InspectionSetup
-
Retrieve a tool from library
License requirements: None.
- retrieveTool(String, CAMObject) - Method in interface nxopen.cam.InspectionSetup
-
Retrieve a tool from library to the target
License requirements: None.
- RetrieveToolData() - Constructor for class nxopen.cam.CAMSetup.RetrieveToolData
-
- RetrieveToolData() - Constructor for class nxopen.cam.InspectionSetup.RetrieveToolData
-
- retrieveWidths() - Method in interface nxopen.PlotColorsWidthsBuilder
-
Retrieve drawing sheet widths
License requirements: None.
- RETURN - Static variable in class nxopen.cam.CamOperationMotionType
-
- RETURN - Static variable in class nxopen.cam.CamPathMotionType
-
- RETURN - Static variable in class nxopen.cam.MoveBuilder.Motion
-
Return
- returnColor() - Method in interface nxopen.cam.PathDisplayColors
-
Returns the color return
License requirements: None.
- returnDeltaAngle() - Method in interface nxopen.cam.TurnAvoidanceReturnBuilder
-
Returns the return delta angle
License requirements: None.
- returnDeltaDistance() - Method in interface nxopen.cam.TurnAvoidanceReturnBuilder
-
Returns the return delta distance
License requirements: None.
- returnDeltaVector() - Method in interface nxopen.cam.TurnAvoidanceReturnBuilder
-
Returns the return delta vector
License requirements: None.
- returnDeltaX() - Method in interface nxopen.cam.TurnAvoidanceReturnBuilder
-
Returns the return delta X
License requirements: None.
- returnDeltaY() - Method in interface nxopen.cam.TurnAvoidanceReturnBuilder
-
Returns the return delta Y
License requirements: None.
- returnDescription - Variable in class nxopen.RuleManager.FunctionInformation
-
Full description of return value
- returnFlag() - Method in interface nxopen.cam.ProbeProtectedParametersBuilder
-
Returns the return to clearance plane flag
License requirements: None.
- returnMoveMode() - Method in interface nxopen.cam.TurnRoughFinishLocalReturnBuilder
-
Returns the adjustment mode mode
License requirements: None.
- returnMoveOption() - Method in interface nxopen.cam.TurnRoughFinishTestCut
-
Returns the test cut return move
License requirements: None.
- returnMovePoint() - Method in interface nxopen.cam.TurnRoughFinishTestCut
-
Returns the test cut return move point
License requirements: None.
- returnPoint() - Method in interface nxopen.cam.TurnAvoidanceReturnBuilder
-
Returns the return point
License requirements: None.
- returnPointMode() - Method in interface nxopen.cam.TurnAvoidanceReturnBuilder
-
Returns the return point mode
License requirements: None.
- returnPointMotionType() - Method in interface nxopen.cam.TurnAvoidanceReturnBuilder
-
Returns the return point motion type
License requirements: None.
- returnPrevDefaults() - Method in interface nxopen.uf.UFObj
-
- returnStart() - Method in interface nxopen.presslinesimulation.UserMotionBuilder
-
Returns the return start angle.
- returnStartAngle() - Method in interface nxopen.tooling.DefineCamBuilder
-
Returns the return start angle
License requirements: None.
- returnStartAngle() - Method in interface nxopen.tooling.UserDefinedMotionBuilder
-
Returns the return start angle
License requirements: None.
- returnStatus - Variable in class nxopen.uf.UFCfi.SpawnCheckStatusData
-
- returnStop() - Method in interface nxopen.presslinesimulation.UserMotionBuilder
-
Returns the return stop angle.
- returnStopAngle() - Method in interface nxopen.tooling.DefineCamBuilder
-
Returns the return stop angle
License requirements: None.
- returnStopAngle() - Method in interface nxopen.tooling.UserDefinedMotionBuilder
-
Returns the return stop angle
License requirements: None.
- returnToModelView(int) - Method in interface nxopen.cae.xyplot.XYPlotManager
-
Clears all plots on a view of main graphics windows and returns to model view
License requirements: None.
- returnType - Variable in class nxopen.RuleManager.FunctionInformation
-
Return type of function
- ReusableObject - Interface in nxopen.tooling
-
- ReusableObjectManager - Interface in nxopen.tooling
-
Represents a collection of ReusableObjects
To obtain an instance of this class, refer to
ToolingManager
Created in NX8.0.0
- reusableObjectManager() - Method in interface nxopen.tooling.ToolingManager
-
Returns the ReusableObjectManager instance belonging to this part .
- ReusableObjectPasteBuilder - Interface in nxopen.tooling
-
- ReusableObjectPasteBuilder.PasteMethods - Class in nxopen.tooling
-
Specifies the design option
- reusablePartBuilder() - Method in interface nxopen.tooling.ElectrodeBlankBuilder
-
Returns the reusable part builder.
- reusableParts() - Method in interface nxopen.Part
-
Returns the AddReusablePartCollection instance belonging to this part .
- reusablePocket() - Method in interface nxopen.tooling.ToolingManager
-
Returns the ReusablePocketCollection instance belonging to this part .
- ReusablePocketBuilder - Interface in nxopen.tooling
-
Reusable pocket builder.
- ReusablePocketBuilder.Hole - Class in nxopen.tooling
-
Represents hole types.
- ReusablePocketCollection - Interface in nxopen.tooling
-
Represents a collection of ReusablePocketBuilder
To obtain an instance of this class, refer to
ToolingManager
Created in NX7.5.0
- REUSE - Static variable in class nxopen.assemblies.DesignElementBuilder.StateType
-
Reuse design element
- REUSE - Static variable in class nxopen.die.AddendumSectionBuilder.SectionShapeType
-
Section shape is read from reuse library.
- REUSE - Static variable in class nxopen.features.FlatteningAndFormingBuilder.Types
-
This option uses a transformation maping of an existing flattening feature to reapply it in its original or reversed direction to additional transformation objects.
- REUSE - Static variable in class nxopen.features.FlatteningAndFormingBuilderEx.Types
-
This option uses a transformation maping of an existing flattening feature to reapply it in its original or reversed direction to additional transformation objects.
- REUSE - Static variable in class nxopen.FlatteningBuilder.Types
-
Deprecated.
Reuse existing flattening result
- REUSE - Static variable in class nxopen.pdm.DesignElementRevision.DesignElementCategory
-
- REUSE_DESIGN_ELEMENT - Static variable in class nxopen.assemblies.CollaborativeContentType
-
Reuse Design Element in a Workset
- REUSE_DESIGN_ELEMENT - Static variable in class nxopen.issue.IssueAttachment.Type
-
Reuse Design Element type
- REUSE_LIBRARY - Static variable in class nxopen.pid.SymbolSourceOption
-
from the reuse library.
- REUSE_LIBRARY - Static variable in class nxopen.tooling.ToolingApplication
-
Reuse Library
- reuseFeatures() - Method in interface nxopen.weld.AutoPointBuilder
-
Returns the feature to reuse intead of creating new.
- reuseFeatures() - Method in interface nxopen.weld.JointmarkBuilder
-
Returns the selected reuse features
License requirements: ugweld ("UG WELD")
.
- reuseFeaturesMethod() - Method in interface nxopen.weld.JointmarkBuilder
-
Returns the method used to infer feature parameters if all connected parts are the same, or skip inferring due to connected parts being different.
- reuseItemList() - Method in interface nxopen.tooling.SelectReuseLibraryListBuilder
-
Returns the select reuse item list.
- ReuseLibrary - Interface in nxopen.routing
-
- reuseLibrary() - Method in interface nxopen.routing.RouteManager
-
- ReuseLibrary.PartLibraryGetChildNodesData - Class in nxopen.routing
-
- ReuseLibrary.PartLibraryGetDisciplineRootsData - Class in nxopen.routing
-
- ReuseLibrary.PartType - Class in nxopen.routing
-
Represents the part type.
- ReuseLibrary.ReportInBom - Class in nxopen.routing
-
Represents the report in BOM logical type.
- ReuseLibrary.SpecificationsGetAttributeRelationshipsData - Class in nxopen.routing
-
- ReuseLibrary.SpecificationsGetBranchTableData - Class in nxopen.routing
-
- ReuseLibrary.SpecificationsGetConnectionCompatibilitiesData - Class in nxopen.routing
-
- ReuseLibrary.SpecificationsGetConnectionPostPlacementData - Class in nxopen.routing
-
- ReuseLibrary.SpecificationsGetGeneralConnectionOptionsData - Class in nxopen.routing
-
- ReuseLibrary.SpecificationsGetGenericPostPlacementsData - Class in nxopen.routing
-
- ReuseLibrary.SpecificationsGetPostPlacementRulesData - Class in nxopen.routing
-
- ReuseLibrary.SpecificationsGetReportInBomData - Class in nxopen.routing
-
- ReuseLibraryDragData - Interface in nxopen.linedesigner
-
Represents a manager of line designer plant model
Established by LineDesigner_ReuseLibraryUtilityBuilder whenever it is needed.
- reuseLibraryItem() - Method in interface nxopen.ame.AssignTemplateToProductBuilder
-
Returns the reuse library item
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- reuseLibraryItem() - Method in interface nxopen.ame.BulkEngineeringObjectBuilder
-
Returns the selection definition builder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- reuseLibraryItem() - Method in interface nxopen.ame.EngineeringObjectBuilder
-
Returns the selection base definition builder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- reuseLibraryItem() - Method in interface nxopen.ame.InstantiateBaseDefinitionReuseSelectionBuilder
-
Returns the reuse library item selection
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- reuseLibraryItem() - Method in interface nxopen.ame.InstantiateTemplateBulkBuilder
-
Returns the reuse library selection item
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- reuseLibraryItem() - Method in interface nxopen.ame.ManageEclassMappingBuilder
-
Returns the reuse library selection item
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- reuseLibraryItem() - Method in interface nxopen.ame.PortBuilder
-
Returns the reuse library item
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- reuseLibraryItem() - Method in interface nxopen.ame.QueryBuilder
-
Returns the public query
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- reuseLibraryItem() - Method in interface nxopen.ame.SelectionBaseDefinitionBuilder
-
Returns the builder for reuse library selection item
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- reuseLibraryItem() - Method in interface nxopen.ame.SelectionEngineeringObjectDefinitionBuilder
-
Returns the reuse library selection item
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- reuseLibraryItem() - Method in interface nxopen.ame.SelectProductDefinitionBuilder
-
Returns the reuse library selection item
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- reuseLibraryItem() - Method in interface nxopen.ame.SelectProductOrEoDefinitionBuilder
-
Returns the reuse library selection item
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- reuseLibraryOperator() - Method in interface nxopen.ame.EditClauseBuilder
-
Returns the query operator for Reuse Library object
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- ReuseLibraryUtilityBuilder - Interface in nxopen.linedesigner
-
Represents a JA for ReuseLibraryUtility
Established by LineDesigner_LineDesignerManager whenever it is needed.
- reuseMatchTolerance() - Method in interface nxopen.weld.AutoPointBuilder
-
Returns the distance used to determine if the location of an existing weld feature is coincident with the
newly calculated location.
- ReusePieChartBuilder - Interface in nxopen.tooldesigner
-
ReusePieChartBuilder
To create a new instance of this class, use nxopen.ToolDesigner.ToolDesignerManager#createReusePieChartBuilder
Created in NX10.0.0
- ReusePositioningObjectBuilder - Interface in nxopen.tooling
-
- ReusePositioningObjectBuilder.CurveExtendToFace - Class in nxopen.tooling
-
extend to face edges type enum.
- ReusePositioningObjectBuilder.CurveTrim - Class in nxopen.tooling
-
trim to each other within section type enum.
- ReusePositioningObjectBuilder.DialogOptions - Class in nxopen.tooling
-
the dialog layout options
- ReusePositioningObjectBuilder.NonStandardPointsData - Class in nxopen.tooling
-
- ReusePositioningObjectBuilder.SubTypes - Class in nxopen.tooling
-
the positioning sub types
- ReusePositioningObjectBuilder.Types - Class in nxopen.tooling
-
the positioning types
- reuseStockPart(Tag) - Method in interface nxopen.uf.UFRoute
-
- REV - Static variable in class nxopen.cae.LaminatePlyGroup.Link
-
same layup with reversed angles
- REV - Static variable in class nxopen.cae.xyplot.AngleUnit
-
Display angle in rev unit
- reversalMode() - Method in interface nxopen.cam.RoughTurningBuilder
-
Returns the Reversal Mode
License requirements: None.
- REVERSE - Static variable in class nxopen.cam.CutDirection.Types
-
Reverse Boundary
- REVERSE - Static variable in class nxopen.cam.FollowPartMoveBuilder.MoveDirectionTypes
-
- reverse() - Method in interface nxopen.cam.ToolPathEditorBuilder
-
Reverse
License requirements: cam_base ("CAM BASE")
.
- REVERSE - Static variable in class nxopen.cam.TurnDirection.Types
-
TurnDirection: Reverse
- REVERSE - Static variable in class nxopen.cam.TurnRoughFinishTestCut.DirectionTypes
-
Test Direction: Reverse
- REVERSE - Static variable in class nxopen.die.AddendumSectionBuilder.SegmentType
-
Update reverse segment.
- reverse() - Method in interface nxopen.die.DieLimitsBuilder
-
Returns the indication that limit points should be reversed.
- REVERSE - Static variable in class nxopen.features.shipdesign.CuttingSideFacesBuilder.Types
-
Reverse the cutting side attributes of the selected solids.
- reverse() - Method in interface nxopen.features.shipdesign.EdgeReinforcementBuilder
-
Returns the indication if the default direction of the flange is reverse or not.
- reverse() - Method in interface nxopen.features.shipdesign.EditStockBuilder
-
Returns the indication whether the direction of the flange should be reversed on this stiffener system.
- reverse() - Method in interface nxopen.features.shipdesign.StiffenerSystemBuilder
-
Returns the indication whether the direction of the stiffener flange should be reversed.
- reverse() - Method in interface nxopen.features.shipdesign.SubSystemBuilder
-
Returns the indication whether the direction of the flange should be reversed on this stiffener sub system.
- reverse() - Method in interface nxopen.features.TrimBodyBuilder
-
Reverse the trim direction of trim body feature
License requirements: solid_modeling ("SOLIDS MODELING")
.
- reverse(TransformerData.ObjectType) - Method in interface nxopen.geometricutilities.TransformerData
-
Reverses the axis.
- REVERSE - Static variable in class nxopen.Sense
-
- reverse - Variable in class nxopen.uf.UFModeling.AskPatchBodyParmsData
-
- REVERSE_DIRECTION - Static variable in class nxopen.cam.RoughFinishTurningBuilder.CutRegionsTypes
-
Cut regions type: Reverse Direction
- REVERSE_NORMAL_DIRECTION - Static variable in class nxopen.features.sheetmetal.FlexibleCableBuilder.BendAngleDirectionOptions
-
Bend angle reverse normal direction.
- REVERSE_PROJECT - Static variable in class nxopen.weld.WeldGrooveExtension
-
Project selected edges to oppsoite face set using
normals from selected edges.
- REVERSE_REFLECTION - Static variable in class nxopen.features.vehicledesign.ReflectionDataBuilder.ReflectMethodType
-
reverse reflection
- REVERSE_SINE_SWEEP - Static variable in class nxopen.cae.AfuMathOperation.SrsToTimeStrategy
-
Reverse sine sweep conversion strategy
- REVERSE_TIME_STAMP - Static variable in class nxopen.ExpressionCollection.SortType
-
Creation order - latest first
- reverseAllNormals() - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder
-
Reverses all normals
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- reverseAllNormals() - Method in interface nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder
-
Reverses all normals.
- reverseAnchorPoint() - Method in interface nxopen.die.AddendumSectionUserDefinedBuilder
-
Returns the indicator to reverse the anchor point.
- reverseArrowDirection() - Method in interface nxopen.annotations.DimensionPreferences
-
Returns the flag indicating whether the Reverse Arrow Direction is set on dimension or not
License requirements: None.
- reverseArrowDirection() - Method in interface nxopen.annotations.DimensionStyleBuilder
-
Returns the reverse arrow direction flag
License requirements: None.
- reverseAttachmentDirection() - Method in interface nxopen.features.shipdesign.EdgeReinforcementBuilder
-
Returns the flag that indicates if the attachment direction is reversed.
- reverseAxis() - Method in interface nxopen.SketchAlongPathBuilder
-
Returns the flag to indicate the horizontal reference axis is reversed
License requirements: None.
- reverseAxis() - Method in interface nxopen.SketchInPlaceBuilder
-
- ReverseBeamElementDirectionBuilder - Interface in nxopen.cae.modelcheck
-
- reverseBendAngle() - Method in interface nxopen.routing.RouteSweptFoldBuilder
-
Returns the reverse bend angle
License requirements: routing_harness ("Routing Harness")
.
- reverseBendDirection() - Method in interface nxopen.features.sheetmetal.AeroLighteningCutoutBuilder
-
Returns the reverse bend direction
License requirements: None.
- reverseBendDirection() - Method in interface nxopen.features.sheetmetal.LighteningCutoutBuilder
-
Returns whether the bend direction is reversed
License requirements: None.
- reverseBlankAll() - Method in interface nxopen.BasePart
-
Reverse blank all the objects in the part.
- reverseBlankAll() - Method in interface nxopen.uf.UFObj
-
- reverseBlend() - Method in interface nxopen.features.StyledBlendBuilder
-
Reverses the blend
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- reverseBoundary1Direction() - Method in interface nxopen.features.StepBuilder
-
Returns the reverse offset reference object 1 direction
License requirements: None.
- reverseBoundary2Direction() - Method in interface nxopen.features.StepBuilder
-
Returns the reverse offset reference object 2 direction
License requirements: None.
- reverseComponentDirection(Point3d, Point3d, double, Point3d, Point3d) - Method in interface nxopen.tooling.AddReusablePart
-
Reverses the direction of the reusable component if the reusable component is placed on a face.
- reverseCurveDirection() - Method in interface nxopen.geometricutilities.ModlAlongCurveAngle
-
Returns whether the direction of the curve to determine the transform should be reversed or not.
- REVERSED - Static variable in class nxopen.cam.FacesSequence.Types
-
Faces Sequence: Reversed
- REVERSED_RADIAL_AXIS - Static variable in class nxopen.cam.TurnOrientWcs.XcMappingTypes
-
Map XC to -XM or -YM of the MCS
- REVERSED_RADIAL_AXIS - Static variable in class nxopen.cam.TurnOrientWcs.YcMappingTypes
-
Map YC to -XM or -YM of the MCS
- REVERSED_SPINDLE_AXIS - Static variable in class nxopen.cam.TurnOrientWcs.XcMappingTypes
-
Map XC to -ZM or -XM of the MCS
- REVERSED_SPINDLE_AXIS - Static variable in class nxopen.cam.TurnOrientWcs.YcMappingTypes
-
Map YC to -ZM or -XM of the MCS
- reverseDatumAxis(Tag) - Method in interface nxopen.uf.UFModlFeatures
-
- reverseDatumPlane(Tag) - Method in interface nxopen.uf.UFModlFeatures
-
- reverseDepthDirection() - Method in interface nxopen.features.ShelfBuilder
-
Returns whether reverse depth direction
License requirements: None.
- reverseDepthDirection() - Method in interface nxopen.features.StepBuilder
-
Returns the reverse offset face direction
License requirements: None.
- reverseDir() - Method in interface nxopen.features.vehicledesign.ReflectionDataBuilder
-
Returns whether the direction of reflection objects is reversed to determine their thickness
License requirements: None.
- ReverseDirection - Interface in nxopen.blockstyler
-
Represents Reverse Direction block .
- reverseDirection() - Method in interface nxopen.cae.MMCCreateBuilder
-
Returns the reverse direction
License requirements: None.
- reverseDirection() - Method in interface nxopen.cae.QueryCurveUsageOptions
-
Returns the reverse direction
License requirements: None.
- reverseDirection() - Method in interface nxopen.cae.responsesimulation.VelocityImpactDirection
-
Returns the option to reverse direction of nodal component or not.
- reverseDirection() - Method in interface nxopen.cam.CenterlineDrillTurningBuilder
-
Returns the reverse direction value
License requirements: None.
- reverseDirection() - Method in interface nxopen.cam.HoleBossSet
-
Reverses the direction of the feature
License requirements: None.
- reverseDirection() - Method in interface nxopen.cam.InspectionArcFeatureBuilder
-
Returns the reverse normal vector direction button
License requirements: None.
- reverseDirection() - Method in interface nxopen.cam.InspectionCircleFeatureBuilder
-
Returns the reverse direction button used to flip the normal vector of the circle
License requirements: None.
- reverseDirection() - Method in interface nxopen.cam.InspectionCparlnFeatureBuilder
-
Returns the reverse direction button used to reverse the normal direction vector
License requirements: None.
- reverseDirection() - Method in interface nxopen.cam.InspectionLineFeatureBuilder
-
Returns the reverse direction button
License requirements: None.
- reverseDirection() - Method in interface nxopen.cam.InspectionPointFeatureBuilder
-
Returns the reverse normal vector direction button
License requirements: None.
- reversedirection() - Method in interface nxopen.cam.InspectionScanArcBuilder
-
Returns the Reverse Direction flag on the Arc
License requirements: None.
- reversedirection() - Method in interface nxopen.cam.InspectionScanCurve5AxisBuilder
-
Returns the Reverse Direction flag on the curve
License requirements: None.
- reversedirection() - Method in interface nxopen.cam.InspectionScanCurveBuilder
-
Returns the Reverse Direction flag on the curve
License requirements: None.
- reversedirection() - Method in interface nxopen.cam.InspectionScanHelixBuilder
-
Returns the Reverse Direction flag on the Helix
License requirements: None.
- reversedirection() - Method in interface nxopen.cam.InspectionScanLineBuilder
-
Returns the Reverse Direction flag on the line
License requirements: None.
- reverseDirection() - Method in interface nxopen.cam.InspectionSurfaceFeatureBuilder
-
Returns the reverse direction
License requirements: None.
- reverseDirection() - Method in interface nxopen.cam.InspectionTorusFeatureBuilder
-
Returns the reverse direction
License requirements: None.
- reverseDirection() - Method in interface nxopen.cam.TurnProbeInspectPointMoveBuilder
-
Reversing the probing direction
License requirements: None.
- reverseDirection() - Method in interface nxopen.die.FingerClearanceNotchBuilder
-
Returns the value to apply, for the purpose of reversing, to the derived clearance direction if a face or sheet body is specified.
- reverseDirection() - Method in interface nxopen.Direction
-
Reverses the sense of a direction.
- reverseDirection() - Method in interface nxopen.display.DynamicSectionBuilder
-
Reverses the plane direction.
- reverseDirection() - Method in interface nxopen.drawings.HingeLineBuilder
-
Returns the reverse direction setting
License requirements: None.
- reverseDirection() - Method in interface nxopen.drawings.SketchSectionLineBuilder
-
Returns the reverse direction
License requirements: None.
- reverseDirection() - Method in interface nxopen.features.AdaptiveShellBuilder
-
Returns the flag of reverse thickness direction
License requirements: None.
- reverseDirection() - Method in interface nxopen.features.AdmOffsetRegionBuilder
-
Returns the reverse offset direction
License requirements: None.
- reverseDirection() - Method in interface nxopen.features.CompositeCurveBuilder
-
Returns the composite curve reverse direction
License requirements: None.
- reverseDirection() - Method in interface nxopen.features.CopyFaceBuilder
-
Returns the reverse direction.
- reverseDirection() - Method in interface nxopen.features.CutFaceBuilder
-
Returns the reverse direction.
- reverseDirection() - Method in interface nxopen.features.CylinderBuilder
-
Returns the reverse direction
License requirements: None.
- reverseDirection() - Method in interface nxopen.features.DatumAxisBuilder
-
Returns
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- reverseDirection() - Method in interface nxopen.features.HoleFeatureBuilder
-
Returns
the reverse direction flag of the hole.
- reverseDirection() - Method in interface nxopen.features.MatchedReferenceBuilder
-
Returns the reverse direction
License requirements: None.
- reverseDirection() - Method in interface nxopen.features.MirrorBodyBuilder
-
Returns the reverse direction
License requirements: None.
- reverseDirection() - Method in interface nxopen.features.OffsetCurveBuilder
-
Returns the reverse direction
License requirements: None.
- reverseDirection() - Method in interface nxopen.features.OffsetEmbossBuilder
-
Returns the reverse direction:
The value of true means that the direction for the feature is reversed from the surface normal
of the target body, or the offset emboss will create a pocket.
- reverseDirection() - Method in interface nxopen.features.OffsetFacetBodyBuilder
-
Returns the flip direction toggle for the offset direction
License requirements: None.
- reverseDirection() - Method in interface nxopen.features.OffsetRegionBuilder
-
Returns the flag of reverse direction of offset, don't use it until nx502
License requirements: None.
- reverseDirection() - Method in interface nxopen.features.PartGeometryCopySelectBuilder
-
Returns the reverse direction
License requirements: None.
- reverseDirection() - Method in interface nxopen.features.PatchBuilder
-
Returns the reverse direction.
- reverseDirection() - Method in interface nxopen.features.ReplaceFaceBuilder
-
Returns the flag of reverse direction between replace face and the surface of replacement face, only for replace type,
don't use it until nx502
License requirements: None.
- reverseDirection() - Method in interface nxopen.features.sheetmetal.AdvancedFlangeBuilder
-
Returns the option to reverse length direction
License requirements: None.
- reverseDirection() - Method in interface nxopen.features.sheetmetal.JoggleInputListItemBuilder
-
Returns the reverse direction
License requirements: None.
- reverseDirection() - Method in interface nxopen.features.sheetmetal.SheetMetalFromSolidBuilder
-
Returns the reverse direction
License requirements: None.
- reverseDirection() - Method in interface nxopen.features.shipdesign.CustomBracketBuilder
-
Returns the flip direction toggle for the extrude direction
License requirements: None.
- reverseDirection() - Method in interface nxopen.features.shipdesign.PlateChamferBuilder
-
Returns the reverse direction
License requirements: None.
- reverseDirection() - Method in interface nxopen.features.shipdesign.ShipTrimBodyBuilder
-
Returns the indication whether the default direction of split should be reversed.
- reverseDirection() - Method in interface nxopen.features.shipdesign.SplitProfilePlateBuilder
-
Returns the reverse direction option of tool datum or face for split.
- reverseDirection() - Method in interface nxopen.features.shipdesign.StandardPartFrameworkBuilder
-
- reverseDirection() - Method in interface nxopen.features.ThickenBuilder
-
Returns the reverse direction.
- reverseDirection() - Method in interface nxopen.features.WaveDatumBuilder
-
Returns the wave linked datum reverse direction
License requirements: None.
- reverseDirection() - Method in interface nxopen.fields.PathObjects
-
Reverses the order of the objects in the path
License requirements: None.
- reverseDirection() - Method in interface nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder
-
Returns the reverse direction
License requirements: None.
- reverseDirection() - Method in interface nxopen.geometricutilities.BooleanToolBuilder
-
Returns the boolean tool reverse direction option
License requirements: None.
- reverseDirection() - Method in interface nxopen.geometricutilities.LawBuilder
-
Returns the reverse direction.
- reverseDirection() - Method in interface nxopen.linedesigner.RailOpeningFeatureBuilder
-
Returns the reverse direction of rail opening
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- reverseDirection() - Method in interface nxopen.Offset
-
Reverses the sense of a offset direction.
- reverseDirection() - Method in interface nxopen.pid.FlowDirectionArrowBuilder
-
Change the direction of FDA.
- reverseDirection() - Method in interface nxopen.positioning.Constraint
-
Reverses the constraint direction.
- reverseDirection(BendReportManager.SegmentInformation[]) - Method in interface nxopen.routing.BendReportManager
-
Reverses the order of the segment information.
- reverseDirection() - Method in interface nxopen.routing.EditLineSegmentBuilder
-
Returns the reverse direction flag.
- reverseDirection() - Method in interface nxopen.Section
-
Reverse the section direction
License requirements: gateway ("UG GATEWAY")
.
- reverseDirection() - Method in interface nxopen.tooling.CoolingExtendBuilder
-
Returns the value which specifies whether to reverse the channel direction or not.
- reverseDirection() - Method in interface nxopen.tooling.FormingInsertBuilder
-
Returns the option to reverse trim direction.
- reverseDirection() - Method in interface nxopen.tooling.OffsetCurve3DBuilder
-
- reverseDirection - Variable in class nxopen.uf.UFModl.FlangeData
-
- reverseDirection - Variable in class nxopen.uf.UFModlFeatures.AskReplaceFaceData
-
- reverseDirection() - Method in interface nxopen.weld.EasyPatternBuilder
-
Returns the reverse direction.
- reverseDirection() - Method in interface nxopen.weld.JointmarkGuideBuilder
-
Returns the reversal status of Guide Curve direction.
- reverseDirection1() - Method in interface nxopen.features.shipdesign.Cutout2Builder
-
Returns the reverse direction1 (used only for Face2Lines, and Faces2Surfaces )
License requirements: None.
- reverseDirection1() - Method in interface nxopen.features.shipdesign.ShipCutoutBuilder
-
Returns the reverse direction 1.
- reverseDirection2() - Method in interface nxopen.features.shipdesign.Cutout2Builder
-
Returns the reverse direction2 (used only for Face2Lines, and Faces2Surfaces)
License requirements: None.
- reverseDirection2() - Method in interface nxopen.features.shipdesign.ShipCutoutBuilder
-
Returns the reverse direction 2.
- reverseDirection3() - Method in interface nxopen.features.shipdesign.Cutout2Builder
-
Returns the reverse direction3 (used only for FacesBetweenSurfacesSurface)
License requirements: None.
- reverseDirectionLength() - Method in interface nxopen.features.sheetmetal.FlangeBendPropertiesBuilder
-
Returns the reverse direction
License requirements: None.
- reverseDirectionOfClosedLoop(int) - Method in interface nxopen.Section
-
Reverse the loop direction of a closed loop while keeping the start curve same.
- reverseDirectionOffset() - Method in interface nxopen.features.sheetmetal.FlangeBendPropertiesBuilder
-
Returns the reverse direction
License requirements: None.
- reverseDirectionOfLoop(int) - Method in interface nxopen.Section
-
Reverse the direction of of a specified single loop of the section.
- reverseDirections() - Method in interface nxopen.cae.modelcheck.ReverseBeamElementDirectionBuilder
-
- reverseDirRef(Tag, Tag, int, boolean, boolean) - Method in interface nxopen.uf.UFModeling
-
- reverseEdgeDirection() - Method in interface nxopen.cam.InspectionEdgePointFeatureBuilder
-
Returns the reverse point normal direction
License requirements: None.
- reverseEnd() - Method in interface nxopen.diagramming.ConnectionBuilder
-
Returns the reversed flag of this connection.
- reverseEnd() - Method in interface nxopen.pid.PipeBuilder
-
Returns the reversed flag of this connection.
- reverseEnd - Variable in class nxopen.routing.HealPath.AllData
-
- reverseEnd() - Method in interface nxopen.routing.HealPath
-
Returns the reverse end end.
- reverseEndDirection() - Method in interface nxopen.features.BridgeCurveBuilder
-
- reverseEndOffset() - Method in interface nxopen.features.shipdesign.PillarBuilder
-
- reverseEndOffset() - Method in interface nxopen.features.shipdesign.SteelSupportBuilder
-
Returns the reverse end offset (used with "SpecifyLine" and "SpecifyCsys" creation methods)
License requirements: None.
- reverseEndOffset0Direction() - Method in interface nxopen.geometricutilities.CurveLengthBuilder
-
Returns the reverse endOffset0 direction flag.
- reverseEndOffset1Direction() - Method in interface nxopen.geometricutilities.CurveLengthBuilder
-
Returns the reverse endOffset1 direction flag.
- reverseEndSurface() - Method in interface nxopen.features.SectionSurfaceBuilder
-
- reverseExtensionSide() - Method in interface nxopen.features.ExtendSheetBuilder
-
Option to reverse the extension side of the edge
License requirements: solid_modeling ("SOLIDS MODELING")
.
- reverseFaceDirection() - Method in interface nxopen.features.LatticeBuilder
-
Returns whether the conformal lattice will be generated on the other side of the face
License requirements: None.
- reverseFaceDirectionCallBack(NXObject, int) - Method in interface nxopen.tooling.ReplaceSolidBuilder
-
Update face information when set to reverse face direction.
- reverseFaceDisplay() - Method in interface nxopen.cae.ShowHideManager
-
Creates a builder for the Reverse Face Display Command, which reverses the display of
each CAE geometry face in the model.
- reverseFaceNormal() - Method in interface nxopen.cam.InspectionPlaneFeatureBuilder
-
Returns the reverse face normal flag
License requirements: None.
- reverseFacePair(NXObject[]) - Method in interface nxopen.features.MidSurfaceByFacePairsBuilder
-
Reverse face pair
License requirements: solid_modeling ("SOLIDS MODELING")
.
- reverseFeatureNormal() - Method in interface nxopen.cam.InspectionCurveFeatureBuilder
-
Reverses the feature normal
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- reverseFeatures() - Method in interface nxopen.cam.fbm.FeatureGeometry
-
Reverse the features
License requirements: cam_base ("CAM BASE")
.
- reverseFirstFaceNormal() - Method in interface nxopen.features.FaceBlendBuilder
-
Returns the first face set normal reversal flag
License requirements: None.
- reverseFixedSegment() - Method in interface nxopen.routing.RouteSweptFoldBuilder
-
Returns the reverse fixed segment
License requirements: routing_harness ("Routing Harness")
.
- reverseFoldRotationAngle() - Method in interface nxopen.routing.RouteSweptFoldBuilder
-
Returns the reverse fold rotation angle
License requirements: routing_harness ("Routing Harness")
.
- reverseForce() - Method in interface nxopen.mechatronics.PositionControlBuilder
-
Returns the min force that speed control can apply.
- reverseForce() - Method in interface nxopen.mechatronics.SpeedControlBuilder
-
Returns the min force that speed control can apply.
- reverseGuideOffset() - Method in interface nxopen.features.shipdesign.SteelVentHolesBuilder
-
Returns the reverse direction of the guide offset.
- reverseHeightDirection() - Method in interface nxopen.features.AeroRibBuilder
-
Returns the reverse height direction flag.
- reverseHeightOffsetDirection() - Method in interface nxopen.features.AeroRibBuilder
-
Returns the reverse height offset direction flag.
- reverseHingeLine() - Method in interface nxopen.drawings.OrientationViewStyle
-
Reverse the hinge line.
- reverseIndividual() - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder
-
Returns the individual face normal
License requirements: None.
- reverseIndividual() - Method in interface nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder
-
Returns the individual face normal.
- reverseIndividualNormal(DisplayableObject) - Method in interface nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder
-
Reverses an individual face normal.
- reverseInsertDirection() - Method in interface nxopen.tooling.GeneralInsertBuilder
-
Returns the reverse insert direction
License requirements: None.
- reverseLastPost() - Method in interface nxopen.routing.HandrailBuilder
-
Reverses the orientation of the last placed post
License requirements: routing_platform ("Routing Platform")
.
- reverseLimit1OffsetDirection() - Method in interface nxopen.features.AeroFlangeBuilder
-
Returns the reverse limit1 offset direction flag.
- reverseLimit1OffsetDirection() - Method in interface nxopen.features.AeroRibBuilder
-
Returns the reverse limit1 offset direction flag.
- reverseLimit2OffsetDirection() - Method in interface nxopen.features.AeroFlangeBuilder
-
Returns the reverse limit2 offset direction flag.
- reverseLimit2OffsetDirection() - Method in interface nxopen.features.AeroRibBuilder
-
Returns the reverse limit2 offset direction flag.
- reverseLine1Offset() - Method in interface nxopen.features.shipdesign.PillarBuilder
-
- reverseLine1Offset() - Method in interface nxopen.features.shipdesign.SteelSupportBuilder
-
Returns the reverse first line offset (only used with "TwoPlanesandLines" creation method)
License requirements: None.
- reverseLine2Offset() - Method in interface nxopen.features.shipdesign.PillarBuilder
-
- reverseLine2Offset() - Method in interface nxopen.features.shipdesign.SteelSupportBuilder
-
Returns the reverse second line offset (only used with "TwoPlanesandLines" creation method)
License requirements: None.
- reverseMainRun() - Method in interface nxopen.formboard.FormboardLayoutBuilder
-
Returns the flag that determines whether the main run is "reversed" or not.
- reverseMaterialSide(int) - Method in interface nxopen.cam.Topology
-
The action of reverse material side of one connected shell
License requirements: cam_base ("CAM BASE")
.
- reverseMetalThickness() - Method in interface nxopen.die.DrawBeadBuilder
-
Returns the indication if the thickness of the sheet metal should be the same as the sewn face normals.
- reverseMotionSide() - Method in interface nxopen.features.StepBuilder
-
Returns the reverse motion side
License requirements: None.
- reverseMovableModifier() - Method in interface nxopen.annotations.DatumTargetBuilder
-
Reverses the Movable datum target direction by 180 degree
License requirements: None.
- reverseNeedles() - Method in interface nxopen.geometricutilities.CombOptionsBuilder
-
Returns the reverse needles flag
License requirements: None.
- reverseNormal() - Method in interface nxopen.die.WearPlateLocChildBuilder
-
Returns the reverse normal setting of die wear plate and locators
License requirements: ug_die_design ("Die Design")
.
- reverseNormal() - Method in interface nxopen.die.WearPlateLocParentBuilder
-
Returns the reverse normal setting of die wear plate and locators
License requirements: ug_die_design ("Die Design")
.
- reverseNormal() - Method in interface nxopen.features.OvercrownBuilder
-
Returns the reverse normal flag for the target faces.
- reverseNormal(DisplayableObject) - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder
-
Reverses individual face normal
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- reverseNormal() - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder
-
Returns the reverse normal
License requirements: die_engineering ("DIE ENGINEERING")
.
- reverseNormal1() - Method in interface nxopen.features.AestheticFaceBlendBuilder
-
Returns the reverse normal1
License requirements: None.
- reverseNormal2() - Method in interface nxopen.features.AestheticFaceBlendBuilder
-
Returns the reverse normal2
License requirements: None.
- reverseNormalDirection() - Method in interface nxopen.cae.responsesimulation.SensorBuilder
-
Returns the option for reverse the normal direction.
- reverseNormalDirection() - Method in interface nxopen.features.ConcaveFacesBuilder
-
Returns the reverse normal direction switch
License requirements: None.
- reverseNormalDirection() - Method in interface nxopen.STLCreator
-
Returns the Reverse Normal Direction - if set to true will will reverse normal direction
License requirements: None.
- reverseNormalFlag() - Method in interface nxopen.geometricutilities.FaceSetData
-
Returns the face set reverse direction flag
License requirements: None.
- reverseNormals() - Method in interface nxopen.cae.modelcheck.ReverseShellElementNormalBuilder
-
- reverseOffset() - Method in interface nxopen.annotations.DimensionSet
-
Reverse the offset of Baseline/Chain Dimension
License requirements: geometric_tol ("GDT")
.
- reverseOffset() - Method in interface nxopen.features.RibbonBuilder
-
Returns the flag indicating that the offset direction should be reversed
License requirements: None.
- reverseOffsetDirection() - Method in interface nxopen.cam.InspectionArcFeatureBuilder
-
Reverses the offset direction
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- reverseOffsetDirection() - Method in interface nxopen.cam.InspectionCircleFeatureBuilder
-
Reverses the offset direction
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- reverseOffsetDirection() - Method in interface nxopen.cam.InspectionCparlnFeatureBuilder
-
Reverses the offset direction
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- reverseOffsetDirection() - Method in interface nxopen.cam.InspectionCurveFeatureBuilder
-
Reverses the offset direction
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- reverseOffsetDirection() - Method in interface nxopen.cam.InspectionLineFeatureBuilder
-
Reverses the offset direction
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- reverseOffsetDirection() - Method in interface nxopen.features.OffsetEdgeBuilder
-
Returns whether reverse offset direction
License requirements: None.
- reverseOffsetDirection() - Method in interface nxopen.features.OffsetMoveCurveBuilder
-
Returns the reverse offset direction
License requirements: None.
- reverseOffsetDirection() - Method in interface nxopen.features.RibBuilder
-
Returns the reverse offset direction flag.
- reverseOffsetDirection() - Method in interface nxopen.weld.WeldBeadPathBuilder
-
Returns the reverse the direction to offset the path section.
- reverseOffsetDirectionOfChain(NXObject) - Method in interface nxopen.SketchOffsetBuilder
-
This function reverses the offset direction of the chain containing the input geometry
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- reverseOffsetDirectionOfLoop(NXObject) - Method in interface nxopen.features.OffsetMoveCurveBuilder
-
This function reverses the offset direction of the loop containing the input curve
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- reverseOffsets() - Method in interface nxopen.features.ChamferBuilder
-
Returns the offset reverse status
License requirements: None.
- reverseOffsetSide() - Method in interface nxopen.features.OffsetEdgeBuilder
-
Returns whether reverse offset side
License requirements: None.
- reverseOrientation() - Method in interface nxopen.die.HandlingCoreChildBuilder
-
Returns the value to reverse the orientation of the core plane,
if true the handling core orientation normal will be reversed,
if false it will not.
- reverseOrientation() - Method in interface nxopen.die.KeywayChildBuilder
-
Returns the value to reverse the orientation of the orientation plane,
if true the keyway orientation normal will be reversed,
if false it will not.
- reverseOrientation() - Method in interface nxopen.die.PadChildBuilder
-
Returns the value to reverse the orientation of the orientation plane,
if true the pad orientation normal will be reversed,
if false it will not.
- reverseOrientationDirection() - Method in interface nxopen.features.shipdesign.PillarBuilder
-
Returns the reverse orientation direction
License requirements: None.
- reverseOrientationDirection() - Method in interface nxopen.features.shipdesign.PillarSystemBuilder
-
Returns the reverse orientation direction
License requirements: None.
- reverseOverlap() - Method in interface nxopen.features.sheetmetal.EditCornerBuilder
-
Returns whether the overlap is reversed or not
License requirements: None.
- reversePartNormal(BasePart) - Method in interface nxopen.tooling.MWDefineSheetsBuilder
-
Reverse the normal for the part
License requirements: None.
- reversePathDirection() - Method in interface nxopen.features.shipdesign.ProfileSystemBuilder
-
Returns the flag that indicates if the default curve direction should be reversed or not.
- reversePlaneNormal() - Method in interface nxopen.SketchAlongPathBuilder
-
Returns the flag to indicate the plane normal is reversed
License requirements: None.
- reversePlaneNormal() - Method in interface nxopen.SketchInPlaceBuilder
-
- reversePreviewComponent(Point3d) - Method in interface nxopen.tooling.AddReusablePart
-
Reverses the direction of the reusable component if the reusable component is not placed on a face.
- reversePropagation() - Method in interface nxopen.linedesigner.TypedConnectorFeatureBuilder
-
Returns the status of if reverse propagation is on
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- reverseReferenceDirection() - Method in interface nxopen.features.shipdesign.PillarBuilder
-
Returns the reverse reference direction
License requirements: None.
- reverseReferenceDirection() - Method in interface nxopen.features.shipdesign.PillarSystemBuilder
-
Returns the reverse reference direction
License requirements: None.
- reverseRibDirection() - Method in interface nxopen.features.RibBuilder
-
Returns the reverse rib direction flag.
- reverseRotationVector() - Method in interface nxopen.drawings.OrientationViewStyle
-
Reverse the rotation vector.
- reverseSecondaryDirection() - Method in interface nxopen.features.FlatteningAndFormingBuilder
-
Returns the secondary direction is the cross product of primary direction and source face normal.
- reverseSecondFaceNormal() - Method in interface nxopen.features.FaceBlendBuilder
-
Returns the second face set normal reversal flag
License requirements: None.
- reverseSection() - Method in interface nxopen.DatumPlane
-
Returns the reverse section flag
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- reverseSectionDirection(int) - Method in interface nxopen.fields.PathObjects
-
Reverses the order of the objects in the path
License requirements: None.
- reverseSeedDirection() - Method in interface nxopen.cae.modelcheck.AlignBeamElementDirectionBuilder
-
Returns the option indicating whether to reverse element directions so that they are aligned with the seed element
License requirements: None.
- reverseSeedNormal() - Method in interface nxopen.cae.modelcheck.AlignShellElementNormalBuilder
-
Returns the option indicating whether to reverse element normals so that they are aligned with the seed element
License requirements: None.
- reverseSeries() - Method in interface nxopen.display.DynamicSectionBuilder
-
Returns the reverse series flag
License requirements: None.
- reverseSheetNormal() - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder
-
Returns the reverse sheet normal
License requirements: die_engineering ("DIE ENGINEERING")
.
- ReverseShellElementNormalBuilder - Interface in nxopen.cae.modelcheck
-
- ReverseShellElementNormalBuilder.DisplayTypeValue - Class in nxopen.cae.modelcheck
-
indicates how display type value is defined
- reverseSide() - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
Returns the option to indicate whether or not to unform the profile to the other side on the target body.
- reverseSide() - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
Returns the option to indicate whether or not to unform the profile to the other side on the target body.
- reverseSide() - Method in interface nxopen.die.UncutRegionsBuilder
-
Reverse the tool side
License requirements: None.
- reverseSide() - Method in interface nxopen.features.Offset3DCurveBuilder
-
Returns the flag of reverse all offset direction.
- reverseSide() - Method in interface nxopen.features.shipdesign.CuttingSideFacesBuilder
-
Returns the value to decide if the normal face assignment should be done to the opposite side.
- reverseSide() - Method in interface nxopen.tooling.BlendCurve3DBuilder
-
Returns the flag of reverse curve blend side.
- reverseSourceDirection() - Method in interface nxopen.die.DieDirectionBuilder
-
Returns the indication if the source's direction should be reversed.
- reverseSourceDirection() - Method in interface nxopen.die.DiePlaneBuilder
-
Returns the indication if the source's direction should be reversed.
- ReverseSplitBuilder - Interface in nxopen.features.shipdesign
-
This class is used to provide the capability to reverse the split interaction between
ship structures.
- reverseSplitDirection() - Method in interface nxopen.features.shipdesign.SplitStandardPartBuilder
-
Returns the flag to indicate whether to reverse the split direction or not.
- reverseStart - Variable in class nxopen.routing.HealPath.AllData
-
- reverseStart() - Method in interface nxopen.routing.HealPath
-
Returns the reverse start end.
- reverseStartDirection() - Method in interface nxopen.features.BridgeCurveBuilder
-
- reverseStartDirection() - Method in interface nxopen.features.SectionSurfaceBuilder
-
- reverseStartDirection() - Method in interface nxopen.features.SpineCurveBuilder
-
Returns the flag indicating if starting direction of the curve should be opposite to the first plane normal.
- reverseStartOffset() - Method in interface nxopen.features.shipdesign.PillarBuilder
-
- reverseStartOffset() - Method in interface nxopen.features.shipdesign.SteelSupportBuilder
-
Returns the reverse start offset (used with "SpecifyLine" and "SpecifyCsys" creation methods)
License requirements: None.
- reverseSubdividePoint() - Method in interface nxopen.routing.SubdivideSegmentBuilder
-
Returns the direction of the start of segment to subdivide.
- reverseSurfaceDirection() - Method in interface nxopen.cam.InspectionEdgePointFeatureBuilder
-
Returns the reverse surface normal direction
License requirements: None.
- reverseTangents - Variable in class nxopen.uf.UFCurve.BridgeData
-
- reverseTaperDirection() - Method in interface nxopen.features.sheetmetal.BendTaperBuilder
-
- reverseTarget() - Method in interface nxopen.features.PasteFaceBuilder
-
Returns the reverse target.
- reverseTarget() - Method in interface nxopen.features.TrimAndExtendBuilder
-
Returns the target reverse side flag
License requirements: None.
- reverseThicknessDirection() - Method in interface nxopen.features.AeroFlangeBuilder
-
Returns the reverse thickness direction flag.
- reverseThicknessDirection() - Method in interface nxopen.features.AeroRibBuilder
-
Returns the reverse thickness direction flag.
- reverseThicknessDirection() - Method in interface nxopen.features.RibBuilder
-
Returns the reverse thickness direction flag.
- reverseThicknessDirection() - Method in interface nxopen.features.sheetmetal.MetaformBuilder
-
Returns the thickness direction
License requirements: None.
- reverseThicknessOffsetDirection() - Method in interface nxopen.features.AeroFlangeBuilder
-
Returns the reverse thickness offset direction flag.
- reverseThicknessOffsetDirection() - Method in interface nxopen.features.AeroRibBuilder
-
Returns the reverse thicknessOffset direction flag.
- reverseThirdFaceNormal() - Method in interface nxopen.features.FaceBlendBuilder
-
Returns the third face set normal reversal flag
License requirements: None.
- reverseTics() - Method in interface nxopen.annotations.BaseFrameBarBuilder
-
This function is used to reverse tics on the framebar
License requirements: nx_ship_drafting ("Ship Drafting")
.
- reverseTool() - Method in interface nxopen.features.PasteFaceBuilder
-
Returns the reverse tool.
- reverseTool() - Method in interface nxopen.features.TrimAndExtendBuilder
-
Returns the tool reverse side flag
License requirements: None.
- reverseTransformation() - Method in interface nxopen.features.FlatteningAndFormingBuilder
-
Returns the flag indicating if the reverse transformation will be used in the opposite direction
License requirements: None.
- reverseTransformation() - Method in interface nxopen.features.FlatteningAndFormingBuilderEx
-
Returns the flag indicating if the reverse transformation will be used in the opposite direction
License requirements: None.
- reverseTransformation() - Method in interface nxopen.FlatteningBuilder
-
- reverseTrimAndRelinkSourceAndCreateUDOForAll(NXObject[]) - Method in interface nxopen.tooling.SplitInsertBuilder
-
Reverse trim direction, relink source, and create udo for all.
- reverseTrimDirection() - Method in interface nxopen.tooling.FormingInsertBuilder
-
Reverse trim direction.
- reverseTrimDirection() - Method in interface nxopen.tooling.SplitSolidBuilder
-
Returns the option to reverse the trim direction or not.
- reverseTrimEnd() - Method in interface nxopen.features.TrimCurveBuilder
-
Returns the curves the end to trim needs to be reversed
License requirements: None.
- reverseTrimSide() - Method in interface nxopen.die.SteelInsertBuilder
-
Returns the reverse trim side setting of the steel insert.
- reverseTrimSide() - Method in interface nxopen.die.TrimTaskBuilder
-
Returns the reverse trim side setting of the trim task.
- reverseTrimSide() - Method in interface nxopen.features.sheetmetal.AdvancedFlangeBuilder
-
Returns the option to reverse trim side
License requirements: None.
- reverseU() - Method in interface nxopen.SurfaceUVDirectionBuilder
-
Returns the reverse u direction option.
- reverseV() - Method in interface nxopen.SurfaceUVDirectionBuilder
-
Returns the reverse v direction option.
- reverseValue() - Method in interface nxopen.routing.AssignCornerBuilder
-
Returns the value to store whether reverse order (for bend creation) or not
License requirements: routing_base ("Routing Basic")
.
- reverseVector() - Method in interface nxopen.tooling.SectionLineCreationBuilder
-
Reverse vector direction
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- reverseWidth1Direction() - Method in interface nxopen.features.AeroFlangeBuilder
-
Returns the reverse width1 direction flag.
- reverseWidth2Direction() - Method in interface nxopen.features.AeroFlangeBuilder
-
Returns the reverse width2 direction flag.
- reverseWidthDirection() - Method in interface nxopen.features.ShelfBuilder
-
Returns whether reverse width direction
License requirements: None.
- reverseWidthOffsetDirection() - Method in interface nxopen.features.AeroFlangeBuilder
-
Returns the reverse width offset direction flag.
- reverseWindDirection() - Method in interface nxopen.routing.WindCatcherBuilder
-
Returns the flag that indicates whether the wind direction is reversed from its normal direction.
- reverseZDirection() - Method in interface nxopen.assemblies.AddComponentBuilder
-
Reverse the Z direction of added components
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- reversible() - Method in interface nxopen.linedesigner.SingleElementConveyorBuilder
-
Returns the option to check whether conveyor is reversible
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- revert(String) - Method in interface nxopen.uf.UFKf
-
- REVERT_EXPLODED - Static variable in class nxopen.uf.UFAssem.ExplStatus
-
- revertExplodeComp(Tag, Tag) - Method in interface nxopen.uf.UFAssem
-
- review(String, String) - Method in interface nxopen.issue.IssueContent
-
Signs off the current workflow task with decision
License requirements: nx_issue_mgmt ("NX Issue Tracking")
.
- reviewAdamsResFile(String) - Method in interface nxopen.uf.UFMotion
-
- reviewDecisions() - Method in interface nxopen.features.shipdesign.PenetrationReviewRequestBuilder
-
Returns the review decisions
License requirements: None.
- reviewRequests(PenetrationRequest[], String, String, String) - Method in interface nxopen.features.shipdesign.PenetrationUtils
-
Review the requests
License requirements: nx_penetration_mgmt ("Penetration Management")
.
- reviewResultFile(String) - Method in interface nxopen.uf.UFMotion
-
- reviewSection() - Method in interface nxopen.features.VarsweepBuilder
-
Returns the review section
License requirements: None.
- REVISE - Static variable in class nxopen.AttributePropertiesBuilder.OperationType
-
Revise.
- REVISE - Static variable in class nxopen.features.shipdesign.PenetrationRequestBuilder.RequestDialogType
-
- REVISE - Static variable in class nxopen.pdm.PartOperationBuilder.OperationType
-
Revise Part
- REVISE_ASSOCIATE - Static variable in class nxopen.features.shipdesign.PenetrationRequestBuilder.RequestDialogType
-
- revision() - Method in interface nxopen.annotations.BalloonNoteBuilder
-
Returns the revision
License requirements: None.
- revision() - Method in interface nxopen.annotations.CoordinateNoteBuilder
-
Returns the revision
License requirements: None.
- revision() - Method in interface nxopen.annotations.GeneralNoteBuilder
-
Returns the revision
License requirements: None.
- revision() - Method in interface nxopen.annotations.MasterSymbolBuilder
-
- revision() - Method in interface nxopen.annotations.MaterialSpecificationBuilder
-
Returns the revision
License requirements: None.
- revision() - Method in interface nxopen.annotations.PartIdentificationBuilder
-
Returns the revision
License requirements: None.
- revision() - Method in interface nxopen.annotations.ProcessSpecificationBuilder
-
Returns the revision
License requirements: None.
- revision() - Method in interface nxopen.annotations.RevisionBusinessModifierBuilder
-
Returns the revision
License requirements: None.
- revision() - Method in interface nxopen.annotations.SpecificNoteBuilder
-
Returns the revision
License requirements: None.
- revision() - Method in interface nxopen.annotations.SymbolCatalogBuilder
-
- revision() - Method in interface nxopen.drafting.DrawingCreationWizardBuilder
-
Returns the revision.
- revision() - Method in interface nxopen.drawings.DrawingSheetBuilder
-
Returns the revision of the drawing sheet to be created or edited
License requirements: None.
- revision() - Method in interface nxopen.layout2d.ConvertLayoutToSheetBuilder
-
Returns the revision of the drawing sheet to be created
License requirements: None.
- revisionAttr() - Method in interface nxopen.pdm.PartOperationImportBuilder
-
Returns the revision attr
License requirements: None.
- RevisionBusinessModifier - Interface in nxopen.annotations
-
Represents business modifier that applies a revision (in the string format such as -A1) to
a PMI.
- RevisionBusinessModifierBuilder - Interface in nxopen.annotations
-
- revisionCount - Variable in class nxopen.uf.UFUgmgr.ListPartRevisionsData
-
- revisionID() - Method in interface nxopen.mechatronics.ObjectInformationBuilder
-
Returns the revision ID.
- revisionid - Variable in class nxopen.mechatronics.SystemObject.AssociateItemData
-
The revision ID of association item.
- revisionid - Variable in class nxopen.uf.UFUgmgr.PartFileInfo
-
- revisionid - Variable in class nxopen.uf.UFUgmgr.PartFileObject
-
- revisionoption - Variable in class nxopen.uf.UFUgmgr.PartFileInfo
-
- revisionRule() - Method in interface nxopen.assemblies.SubsetConfigurationBuilder
-
Returns the revision rule for use in searches for the contents of the
Subset
.
- revisionRule() - Method in interface nxopen.mechatronics.PreferencesBuilder
-
Returns the revision rule for MCD Objects.
- revisionRule() - Method in interface nxopen.pdm.ConfigurationContextBuilder
-
Returns the revision rule
License requirements: None.
- revisionrule - Variable in class nxopen.uf.UFUgmgr.PartFileInfo
-
- revisionRule() - Method in interface nxopen.validate.RequirementCollection
-
Returns the revision rule for requirement from Teamcenter
License requirements: None.
- revisions - Variable in class nxopen.uf.UFUgmgr.ListPartRevisionsData
-
- revisionString() - Method in interface nxopen.linedesigner.InsertSheetBuilder
-
Returns the revision string
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- revMethod() - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
Returns the revision method
License requirements: None.
- revName() - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
Returns the revision name
License requirements: None.
- REVOLUTE - Static variable in class nxopen.motion.JointDefine.Type
-
This joint type is a single axis rotation.
- REVOLUTE_JOINT - Static variable in class nxopen.motion.ConnectorBuilder.AttachmentType
-
connector is attacted to revolute joint
- REVOLUTE_JOINT - Static variable in class nxopen.uf.UFMotion.JointType
-
- REVOLUTE_SPRING_DAMPER - Static variable in class nxopen.uf.UFMotion.SpringDamperType
-
- REVOLUTION_TO_REVOLUTION - Static variable in class nxopen.motion.AnalyticalContactBuilder.ContactTypeOption
-
- revolutionBodies() - Method in interface nxopen.motion.AnalyticalContactBuilder
-
Returns the revolution bodies
License requirements: mechanisms ("MECHANISMS")
.
- revolutionGeometryData() - Method in interface nxopen.motion.AnalyticalContactBuilder
-
Returns the revolution line-arc file option
License requirements: mechanisms ("MECHANISMS")
.
- revolutionGeometryDataFile() - Method in interface nxopen.motion.AnalyticalContactBuilder
-
Returns the revolution line-arc file.
- revolutionLink() - Method in interface nxopen.motion.AnalyticalContactBuilder
-
Returns the revolution link
License requirements: mechanisms ("MECHANISMS")
.
- revolutionMaterialSide() - Method in interface nxopen.motion.AnalyticalContactBuilder
-
Returns the material side toggle for revolution
License requirements: mechanisms ("MECHANISMS")
.
- REVOLUTIONS - Static variable in class nxopen.cam.CenterlineDrillTurningBuilder.DwellTypes
-
Dwell: Revolutions
- revolutions() - Method in interface nxopen.cam.CutDwell
-
Returns the cut dwell revolutions
License requirements: None.
- REVOLUTIONS - Static variable in class nxopen.cam.CutDwell.Types
-
Dwell after Rough Cut: Revolutions
- REVOLUTIONS - Static variable in class nxopen.cam.Cycle.DwellType
-
dwell revolutions
- REVOLUTIONS - Static variable in class nxopen.cam.CycleDwell.Mode
-
dwell revolutions
- REVOLUTIONS - Static variable in class nxopen.cam.FinishDwell.Types
-
Dwell after Finish/Profile Cut: Revolutions
- revolutions() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns the revolutions of the Scan Helix
License requirements: None.
- REVOLUTIONS - Static variable in class nxopen.cam.InspectionMethodBuilder.ScanHelixTurnTypes
-
Revolutions
- revolutions() - Method in interface nxopen.cam.InspectionScanHelixBuilder
-
Returns the revolutions of the Scan Helix
License requirements: None.
- REVOLUTIONS - Static variable in class nxopen.cam.TurnRoughFinishLocalReturnBuilder.DwellUnitTypes
-
Revolutions
- Revolve - Interface in nxopen.features
-
Represents a revolve feature.
- REVOLVE - Static variable in class nxopen.geometricutilities.BooleanToolBuilder.BooleanToolType
-
Tool consists of revolve created on the fly
- REVOLVE_GEOM - Static variable in class nxopen.uf.UFBrep.GeomType
-
- revolveAngle() - Method in interface nxopen.cae.AxiSymmetricParameters
-
Returns the revolve angle
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- revolveAngle - Variable in class nxopen.cae.Post.Axisymmetric
-
- RevolveBuilder - Interface in nxopen.features
-
Represents a revolve builder.
- revolved() - Method in interface nxopen.drawings.SectionLineBuilder
-
- REVOLVED - Static variable in class nxopen.drawings.SectionLineBuilder.Types
-
Deprecated.
- REVOLVED - Static variable in class nxopen.drawings.SectionViewBuilder.SectionLineType
-
- REVOLVED_ALL - Static variable in class nxopen.cae.CyclicSymmetricParameters.GetResult
-
- REVOLVED_MODEL - Static variable in class nxopen.cae.AxiSymmetricParameters.GetResult
-
- REVOLVED_SELECTED_SECTORS - Static variable in class nxopen.cae.CyclicSymmetricParameters.GetResult
-
- REVOLVED_SXLINE - Static variable in class nxopen.uf.UFDraw.SxlineType
-
- revolvedFace() - Method in interface nxopen.features.VirtualCurveBuilder
-
Returns the revolved face.
- RevolvedSectionLine - Interface in nxopen.drawings
-
Revolved Section Line is used to create section views which are
revolved about an axis.
- RevolvedSectionLineBuilder - Interface in nxopen.drawings
-
- revolveSketchedCurve() - Method in interface nxopen.tooling.BurringInsertBuilder
-
Extract burring region.
- revsensitivity - Variable in class nxopen.features.vehicledesign.BaseDataImportExportBuilder.AssignItemNumberData
-
- revsensitivity - Variable in class nxopen.features.vehicledesign.BaseDataImportExportBuilder.AssignItemRevisionData
-
- rewind() - Method in interface nxopen.AttributeIterator
-
Rewind the iterator.
- REWIND - Static variable in class nxopen.uf.UFDpud.Purpose
-
- rewindDrivePoint(Tag) - Method in interface nxopen.uf.UFScop
-
- rewindToStart() - Method in interface nxopen.geometricutilities.PlayButtonsBuilder
-
TODO: fill in a description for this
License requirements: None.
- REYNOLDS_NUMBER - Static variable in class nxopen.cae.Result.Quantity
-
- RFS - Static variable in class nxopen.annotations.MaterialConditionModifier
-
Specified regardless of feature size modifier
- RFS - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.ParamPriDatumModifier
-
Regardless of Feature Size
- RFS - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.ParamSecDatumModifier
-
Regardless of Feature Size
- RFS - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.ParamTerDatumModifier
-
Regardless of Feature Size
- RFS - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.ParamTolMatModifier
-
Regardless of Feature Size
- RFS - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.ParamTolMatModifierDup
-
Regardless of Feature Size
- RFS - Static variable in class nxopen.uf.UFGdt.MaterialModifier
-
- RGB - Static variable in class nxopen.display.ImageBaseBuilder.ImageColorModes
-
rgb color mode
- Rgb() - Constructor for class nxopen.NXColor.Rgb
-
- Rgb(double, double, double) - Constructor for class nxopen.NXColor.Rgb
-
Constructor for the Rgb object.
- rgb - Variable in class nxopen.preferences.PartVisualizationEmphasis.LayersOptions
-
the color of de-emphasized shaded geometry when the
See-Thru style is set to Layers.
- rgb - Variable in class nxopen.preferences.PartVisualizationEmphasis.ShellOptions
-
the color of de-emphasized shaded geometry when the
See-Thru style is set to Shell.
- RGB - Static variable in class nxopen.preferences.RoutingMechanical.LineColorType
-
- RGB_PLUS_NOISE - Static variable in class nxopen.ModelingViewHighQualityImage.DisplayTechniqueType
-
The RGB algorithm is augmented with the addition of
random noise to the initial RGB values before the
dither takes place.
- RGBColorPicker - Interface in nxopen.blockstyler
-
Represents a RGB Color Picker block .
- rgbtol - Variable in class nxopen.cae.Post.ASCIIDiffTolerances
-
absolute tolerance on rgb values
- rgbValues - Variable in class nxopen.uf.UFSf.ColorAttr
-
- rhleft() - Method in interface nxopen.features.vehicledesign.HeadImpactRearHeaderDetailBuilder
-
Returns the left rear header target alternative point.
- rhleftFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactRearHeaderDetailBuilder
-
Returns the left rear header target alternative point flag.
- RHO - Static variable in class nxopen.features.AestheticFaceBlendBuilder.CenterType
-
Rho is the ratio of the center radius and the base radius.
- rho() - Method in interface nxopen.features.BridgeCurveBuilder
-
- rho() - Method in interface nxopen.features.BridgeCurveBuilderEx
-
Returns the rho value
License requirements: None.
- RHO - Static variable in class nxopen.features.SectionSurfaceBuilder.SectionMethodRhoEnum
-
Deprecated.
rho law method
- RHO - Static variable in class nxopen.features.SectionSurfaceBuilderEx.ConicType
-
Rho mode
- RHO - Static variable in class nxopen.features.SectionSurfaceBuilderEx.SectionMethodRhoType
-
rho law method
- rho() - Method in interface nxopen.geometricutilities.ConicCrossSection
-
Returns the rho expression for the conic section with face blend
License requirements: None.
- rho() - Method in interface nxopen.SketchConicBuilder
-
Returns the Rho value
License requirements: None.
- RHO_DATA_OUT_OF_RANGE - Static variable in class nxopen.uf.UFConstants
-
- rhoffsetMax() - Method in interface nxopen.features.vehicledesign.HeadImpactRearHeaderDetailBuilder
-
Returns the maximum offset allowed to position the rear header target.
- rhoLaw() - Method in interface nxopen.features.SectionSurfaceBuilder
-
- rhoLaw() - Method in interface nxopen.features.SectionSurfaceBuilderEx
-
Returns the rho law.
- rhoLawControl() - Method in interface nxopen.geometricutilities.ConicCrossSection
-
Returns the Rho Law builder
License requirements: None.
- rhoOption() - Method in interface nxopen.features.AestheticFaceBlendBuilder
-
Returns the rho option
License requirements: None.
- rhoOption() - Method in interface nxopen.geometricutilities.ConicCrossSection
-
Returns the rho option for the conic section with face blend
License requirements: None.
- rhotype - Variable in class nxopen.features.EdgeBlendBuilder.ChainsetAndSectionValueData
-
The rho type of this chain set collector
- rhoType() - Method in interface nxopen.features.FaceBlendBuilder
-
Returns the rho type for face blend
License requirements: None.
- rhoValue() - Method in interface nxopen.features.AestheticFaceBlendBuilder
-
Returns the rho value
License requirements: None.
- rhoValue() - Method in interface nxopen.features.GeneralConicBuilder
-
Returns the rho value.
- rhovaluetag - Variable in class nxopen.features.EdgeBlendBuilder.ChainsetAndSectionValueData
-
The conic rho value expression of this chain set collector
- rhright() - Method in interface nxopen.features.vehicledesign.HeadImpactRearHeaderDetailBuilder
-
Returns the right rear header target alternative point.
- rhrightFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactRearHeaderDetailBuilder
-
Returns the right rear header target alternative point flag.
- rhsStr - Variable in class nxopen.uf.UFModlGeneral.DissectExpStringData
-
- Rib - Interface in nxopen.features
-
Represents a rib feature
To create or edit an instance of this class, use
RibBuilder
Created in NX9.0.0
- RIB_TOP_FACE_EDGES - Static variable in class nxopen.SelectionIntentRule.RuleType
-
- ribbingParent() - Method in interface nxopen.die.DrawDiePunchBuilder
-
Returns the ribbing parent builder of the draw die punch.
- RIBBON - Static variable in class nxopen.cae.Post.StreamlineStyle
-
- Ribbon - Interface in nxopen.features
-
Represents a ribbon feature
To create or edit an instance of this class, use
RibbonBuilder
Created in NX6.0.0
- RIBBON_SURFACE - Static variable in class nxopen.tooling.MWDesignPartingSurfaceBuilder.PartingSurfaceType
-
Ribbon
- RibbonBuilder - Interface in nxopen.features
-
- RibBuilder - Interface in nxopen.features
-
- RibBuilder.RibCapGeometryOptions - Class in nxopen.features
-
These represent the options for the Rib cap
- RibBuilder.RibDraftOptions - Class in nxopen.features
-
These represent the options for drafting the Rib
- RibBuilder.RibThicknessOffsetOptions - Class in nxopen.features
-
These represent the options for Rib Walls Offset
- RibBuilder.RibTypes - Class in nxopen.features
-
These represent the options for Rib type
- ribCapGeometryOption() - Method in interface nxopen.features.RibBuilder
-
Returns the rib cap geometry
License requirements: None.
- ribCapOffset() - Method in interface nxopen.features.RibBuilder
-
Returns the rib cap offset
License requirements: None.
- RibChildBuilder - Interface in nxopen.die
-
Represents a Die Rib Child sub feature.
- RibChildBuilder.CenterlineData - Class in nxopen.die
-
- ribDraftOption() - Method in interface nxopen.features.RibBuilder
-
Returns the rib draft options
License requirements: None.
- ribForm() - Method in interface nxopen.features.AeroRibBuilder
-
Returns the rib form
License requirements: None.
- ribMaxArea() - Method in interface nxopen.cae.RemoveRibsBuilder
-
Returns the maximum rib area allowed in rib detection
License requirements: None.
- ribMaxElem() - Method in interface nxopen.cae.RemoveRibsBuilder
-
Returns the maximum number of elements allowed in rib detection
License requirements: None.
- ribMinBoundaryNodeRatio() - Method in interface nxopen.cae.RemoveRibsBuilder
-
Returns the minimum percentage of nodes located on the edge of a rib parameter
in rib detection.
- RibParentBuilder - Interface in nxopen.die
-
Represents a Die Rib Parent sub feature.
- ribsParent() - Method in interface nxopen.die.SteelInsertBuilder
-
Returns the ribs parent builder of the diesteelinsert
License requirements: ug_die_design ("Die Design")
.
- ribSupportWidth() - Method in interface nxopen.die.WearPlateLocChildBuilder
-
Returns the wear plate rib support width of die wear plate and locators
License requirements: ug_die_design ("Die Design")
.
- ribSupportWidth() - Method in interface nxopen.die.WearPlateLocParentBuilder
-
Returns the wear plate rib support width of die wear plate and locators
License requirements: ug_die_design ("Die Design")
.
- ribThickness() - Method in interface nxopen.features.RibBuilder
-
Returns the rib thickness
License requirements: None.
- ribThicknessOffsetOption() - Method in interface nxopen.features.RibBuilder
-
Returns the rib walls offset type
License requirements: None.
- RibTopFaceEdgesRule - Interface in nxopen
-
Represents a
SelectionIntentRule
that collects the like convexity outer edges of a group of faces.
- ribType() - Method in interface nxopen.features.RibBuilder
-
Returns the rib type
License requirements: None.
- RIGHT - Static variable in class nxopen.ame.GeneralAnnotationSettingsBuilder.VerticalTextPosition
-
- RIGHT - Static variable in class nxopen.annotations.BaseSurfaceFinishBuilder.ParanthesesType
-
Deprecated.
Right
- RIGHT - Static variable in class nxopen.annotations.BaseSurfaceFinishBuilder.ParenthesesType
-
Right
- RIGHT - Static variable in class nxopen.annotations.LeaderSide
-
- RIGHT - Static variable in class nxopen.annotations.MasterSymbolBuilder.LeaderAttachmentType
-
Right Attachment
- RIGHT - Static variable in class nxopen.annotations.StackAlignmentPosition
-
- RIGHT - Static variable in class nxopen.annotations.StackVerticalAlignment
-
Align vertically along right edge of text box
- RIGHT - Static variable in class nxopen.annotations.Table.InsertColumnsType
-
Insert column to right.
- RIGHT - Static variable in class nxopen.annotations.TableCellStyleBuilder.BorderLocationType
-
- RIGHT - Static variable in class nxopen.annotations.TableCellStyleBuilder.TabDirectionType
-
- RIGHT - Static variable in class nxopen.annotations.TableSectionStyleBuilder.ContinuationPropertyType
-
Right
- RIGHT - Static variable in class nxopen.annotations.TextJustification
-
- RIGHT - Static variable in class nxopen.cae.Post.Position
-
- RIGHT - Static variable in class nxopen.cae.PostAnnotation.TextAlignment
-
- RIGHT - Static variable in class nxopen.cae.xyplot.TextAlignment
-
Right align text
- RIGHT - Static variable in class nxopen.cae.xyplot.TextBoxMarginOption
-
The right margin of text box
- RIGHT - Static variable in class nxopen.cam.CutSideBuilder.Option
-
Cut side is right
- RIGHT - Static variable in class nxopen.cam.CutSides.SideType
-
Right Side
- RIGHT - Static variable in class nxopen.cam.GrooveToolBuilder.HolderGrooveHands
-
Right hand
- RIGHT - Static variable in class nxopen.cam.InspectionMethodBuilder.ScanHelixTurnDirectionTypes
-
Right hand turn
- RIGHT - Static variable in class nxopen.cam.LaserProfileMove.ToolSides
-
Right
- RIGHT - Static variable in class nxopen.cam.ToolChangeCiBuilder.HeadDesignationTypes
-
Right
- RIGHT - Static variable in class nxopen.cam.TurnToolBuilder.HolderHands
-
Hand: Right
- RIGHT - Static variable in class nxopen.diagramming.DiagrammingAlignment
-
Setting the right alignment
- RIGHT - Static variable in class nxopen.diagramming.DiagrammingConnectionlabelverticaloffsetposition
-
Right
- RIGHT - Static variable in class nxopen.diagramming.DiagrammingStubsides
-
Right side
- RIGHT - Static variable in class nxopen.diagramming.tables.ContinuationLocation
-
Right continuation location
- RIGHT - Static variable in class nxopen.diagramming.TextStyleBuilder.TextAlignmentType
-
- RIGHT - Static variable in class nxopen.die.WearPlateLocChildBuilder.PositionType
-
Position locator to the right of the wear plate.
- RIGHT - Static variable in class nxopen.die.WearPlateLocParentBuilder.PositionType
-
Position locator to the right of the wear plate.
- RIGHT - Static variable in class nxopen.display.Stage.WallType
-
The right wall of the stage.
- RIGHT - Static variable in class nxopen.drawings.DrawingRegionBuilder.RegionHorizontalGrowthDirection
-
- RIGHT - Static variable in class nxopen.drawings.RotationSymbolTypes
-
- RIGHT - Static variable in class nxopen.drawings.View2dOrientBuilder.Type
-
right view
- RIGHT - Static variable in class nxopen.features.HolePackageBuilder.ThreadRotationOptions
-
Right rotation
- RIGHT - Static variable in class nxopen.features.sheetmetal.BridgeTransitionBuilder.WidthDirectionOptions
-
It means Bridge Transition width direction at point specified and fin direction are in same direction.
- RIGHT - Static variable in class nxopen.features.sheetmetal.ContourFlangeBuilder.SectionSideOptions
-
- RIGHT - Static variable in class nxopen.features.sheetmetal.DimpleBuilder.SectionSideOptions
-
Side pointed to by the tangent cross normal vector
- RIGHT - Static variable in class nxopen.features.sheetmetal.DrawnCutoutBuilder.SectionSideOptions
-
Side pointed to by the tangent cross normal vector
- RIGHT - Static variable in class nxopen.features.sheetmetal.LoftedFlangeBuilder.SectionSideOptions
-
Side pointed to by the tangent cross normal vector
- RIGHT - Static variable in class nxopen.features.sheetmetal.LouverBuilder.SectionSideOptions
-
Side pointed to by the tangent cross normal vector
- RIGHT - Static variable in class nxopen.features.sheetmetal.NormalCutoutBuilder.SectionSideOptions
-
Side pointed to by the tangent cross normal vector
- RIGHT - Static variable in class nxopen.features.sheetmetal.TabBuilder.SectionSideOptions
-
Side pointed to by the tangent cross normal vector
- RIGHT - Static variable in class nxopen.features.vehicledesign.BaseDataPassengerBuilder.SeatDirectionOptions
-
Seat directed towards the right side of the car.
- RIGHT - Static variable in class nxopen.features.vehicledesign.CrashBarrierBuilder.OverlapSideType
-
- RIGHT - Static variable in class nxopen.features.vehicledesign.CrashBarrierBuilder.SidePositionType
-
- RIGHT - Static variable in class nxopen.features.vehicledesign.PendulumPlacementBuilder.SideType
-
- RIGHT - Static variable in class nxopen.features.vehicledesign.SeatBeltAnchorageBuilder.SeatPositionTypes
-
right
- RIGHT - Static variable in class nxopen.fields.DisplayPropertiesBuilder.LegendPos
-
- RIGHT - Static variable in class nxopen.geometricutilities.EndHoleData.ThreadRotationOptions
-
Right rotation
- RIGHT - Static variable in class nxopen.geometricutilities.FrameOnPathBuilder.AnchorLocationType
-
Right position
- RIGHT - Static variable in class nxopen.HumanData.SideType
-
Indicate the right side of human
- RIGHT - Static variable in class nxopen.HumanHandsDialogBuilder.HandType
-
- RIGHT - Static variable in class nxopen.HumanHandShapeData.HandOpt
-
- RIGHT - Static variable in class nxopen.linedesigner.GateFeatureBuilder.GateOpeningStyle
-
- RIGHT - Static variable in class nxopen.linedesigner.RailOpeningFeatureBuilder.GateOpeningStyle
-
- RIGHT - Static variable in class nxopen.motion.TirePropertyTnoBuilder.TireSideType
-
- RIGHT - Static variable in class nxopen.motion.TirePropertyTnoBuilder.TrackSideType
-
- RIGHT - Static variable in class nxopen.PlotBuilder.JustificationOption
-
Right Justify
- RIGHT - Static variable in class nxopen.PlotBuilder.XdisplayOption
-
X dimension right
- RIGHT - Static variable in class nxopen.preferences.SessionUserInterfaceUI.DisplayResourceBar
-
- RIGHT - Static variable in class nxopen.tooling.AssemblyDrawingBuilder.ModelViewToUseValue
-
- RIGHT - Static variable in class nxopen.tooling.BlankLayoutBuilder.LeftRightSideOption
-
the right side type
- right - Variable in class nxopen.uf.UFPlot.Extents
-
- RIGHT - Static variable in class nxopen.View.Canned
-
- RIGHT0 - Static variable in class nxopen.cam.GrooveToolBuilder.HolderHands
-
Right hand, 0 degrees
- RIGHT90 - Static variable in class nxopen.cam.GrooveToolBuilder.HolderHands
-
Right hand, 90 degrees
- RIGHT_ALONG_ROTARYAXIS - Static variable in class nxopen.cam.BladeCutStart.Type
-
right along rotaryaxis
- RIGHT_ANKLE - Static variable in class nxopen.HumanData.JointType
-
Indicate joint named right_ankle
- RIGHT_ARROW - Static variable in class nxopen.diagramming.HorizontalCenteringMarkType
-
Right Arrow
- RIGHT_ARROW - Static variable in class nxopen.diagramming.SheetBordersAndZonesBuilder.HorizontalCenteringMarkType
-
Right Arrow
- RIGHT_ARROW - Static variable in class nxopen.drawings.BordersAndZonesBuilder.HorizontalCenteringMarkType
-
Deprecated.
Right Arrow
- RIGHT_ARROW - Static variable in class nxopen.drawings.HorizontalCenteringMarkType
-
Right Arrow
- RIGHT_BOTTOM - Static variable in class nxopen.Light.SceneType
-
Light from the bottom right of the view
- RIGHT_DIRECTION - Static variable in class nxopen.features.sheetmetal.FlexibleCableBuilder.PathAdjustmentAngleDirectionOptions
-
Path adjustment angle right direction.
- RIGHT_ELBOW - Static variable in class nxopen.HumanData.InverseKinematicsBodyParts
-
Indicate inverse kinematics body parts named right elbow
- RIGHT_ELBOW - Static variable in class nxopen.HumanData.JointType
-
Indicate joint named right_elbow
- RIGHT_END - Static variable in class nxopen.drawings.BrokenViewBuilder.HorizontalBreakSide
-
Hide Right side
- RIGHT_EYE - Static variable in class nxopen.HumanData.ReferencePointType
-
Indicate reference point at the right eye
- RIGHT_EYE_POINT - Static variable in class nxopen.HumanData.EditDisplayBodyParts
-
Indicate edit display body parts named right eye point
- RIGHT_FINGER00 - Static variable in class nxopen.HumanData.JointType
-
Indicate joint named right_finger00
- RIGHT_FINGER10 - Static variable in class nxopen.HumanData.JointType
-
Indicate joint named right_finger10
- RIGHT_FINGER20 - Static variable in class nxopen.HumanData.JointType
-
Indicate joint named right_finger20
- RIGHT_FINGER30 - Static variable in class nxopen.HumanData.JointType
-
Indicate joint named right_finger30
- RIGHT_FOOT - Static variable in class nxopen.HumanData.InverseKinematicsBodyParts
-
Indicate inverse kinematics body parts named right foot
- RIGHT_HAND - Static variable in class nxopen.cam.fbm.ThreadFeatureGeometry.Rotation
-
Rotation: Right-hand
- RIGHT_HAND - Static variable in class nxopen.cam.HoleBossGeom.RotationTypes
-
Rotation: Right-hand
- RIGHT_HAND - Static variable in class nxopen.features.HelixBuilder.TurnDirections
-
Right handed helix
- RIGHT_HAND - Static variable in class nxopen.features.shipdesign.FeatureParmsBuilder.OrientationAngleRuleTypes
-
Angles are measured based on a right hand rule.
- RIGHT_HAND - Static variable in class nxopen.features.shipdesign.ShipDesignPreferencesBuilder.AngleRuleTypes
-
Angle is measured using the right hand rule system.
- RIGHT_HAND - Static variable in class nxopen.HumanData.InverseKinematicsBodyParts
-
Indicate inverse kinematics body parts named right hand
- RIGHT_HAND - Static variable in class nxopen.RotationDirection
-
- RIGHT_HEEL_POINT - Static variable in class nxopen.HumanData.EditDisplayBodyParts
-
Indicate edit display body parts named right heel point
- RIGHT_HIP - Static variable in class nxopen.HumanData.JointType
-
Indicate joint named right_hip
- RIGHT_KNEE - Static variable in class nxopen.HumanData.InverseKinematicsBodyParts
-
Indicate inverse kinematics body parts named right knee
- RIGHT_KNEE - Static variable in class nxopen.HumanData.JointType
-
Indicate joint named right_knee
- RIGHT_LEADER_CONNECTION - Static variable in class nxopen.uf.UFDisp.PolyMarker
-
- RIGHT_LEADER_CONNECTION - Static variable in class nxopen.uf.UFDrf.SymbolConnectionType
-
- RIGHT_LEADER_CONNECTION - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- RIGHT_MIDDLE - Static variable in class nxopen.display.DecalBuilder.Anchor
-
anchor at right middle corner of decal image
- RIGHT_OPPOSITE_ROTARYAXIS - Static variable in class nxopen.cam.BladeCutStart.Type
-
right opposite rotaryaxis
- RIGHT_SHOULDER - Static variable in class nxopen.HumanData.JointType
-
Indicate joint named right_shoulder
- RIGHT_SIDE - Static variable in class nxopen.features.vehicledesign.HeadImpactBuilder.CalculationType
-
- RIGHT_TO_LEFT - Static variable in class nxopen.cam.GuidedCurveCutOrder.CutOrderOption
-
- RIGHT_TO_LEFT - Static variable in class nxopen.features.shipdesign.InverseBendingLinesBuilder.MeasureType
-
Right to left.
- RIGHT_TOE - Static variable in class nxopen.HumanData.ReferencePointType
-
Indicate reference point at the right toe
- RIGHT_TOE_POINT - Static variable in class nxopen.HumanData.EditDisplayBodyParts
-
Indicate edit display body parts named right toe point
- RIGHT_TOES - Static variable in class nxopen.HumanData.JointType
-
Indicate joint named right_toes
- RIGHT_TOP - Static variable in class nxopen.Light.SceneType
-
Light from the top right of the view
- RIGHT_TOP_SIDE - Static variable in class nxopen.linedesigner.PlatformEquipmentBuilder.SideFromCenterlineTypeAPI
-
- RIGHT_WRIST - Static variable in class nxopen.HumanData.JointType
-
Indicate joint named right_wrist
- RIGHTANGLE - Static variable in class nxopen.geometricutilities.TriangularFrameBuilder.Subtypes
-
Right angle triangle
- rightAngleBuilder() - Method in interface nxopen.cam.TurningToolBuilder
-
Returns the right angle builder (inheritable double)
License requirements: cam_base ("CAM BASE")
.
- rightBorder() - Method in interface nxopen.diagramming.tables.CellBuilder
-
Returns the right border line rendering properties.
- rightBorder() - Method in interface nxopen.diagramming.tables.TableBuilder
-
Returns the right border rendering properties.
- rightChildFlow() - Method in interface nxopen.routing.DivisionsBuilder
-
Returns the value of percent absolute or relative flow in right (second) child division
License requirements: routing_hvac ("Routing HVAC")
.
- rightDistance() - Method in interface nxopen.tooling.BlankLayoutBuilder
-
Returns the right boundary distance between blank and strip.
- rightEyeColor() - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder
-
Returns the color applied to the right eye vision geometries for the driver or passenger side mirror.
- rightEyeDownColor() - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder
-
Returns the color applied to the right eye down-vision geometries for the inside mirror.
- rightEyeUpColor() - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder
-
Returns the color applied to the right eye up-vision geometries for the inside mirror.
- RIGHTFROM_BOTTOM_LEFT - Static variable in class nxopen.drawings.DrawingRegionBuilder.RegionGrowthDirection
-
- RIGHTFROM_TOP_LEFT - Static variable in class nxopen.drawings.DrawingRegionBuilder.RegionGrowthDirection
-
- RIGHTHAND - Static variable in class nxopen.geometricutilities.HelixPattern.DirectionTypes
-
Right hand orientation.
- RIGHTHAND - Static variable in class nxopen.geometricutilities.SpiralPattern.OrientType
-
Right hand orientation.
- rightHandOrientation - Variable in class nxopen.HumanPosturePredictionBuilder.ComputeHandCsysData
-
the orientation of right hand
- rightHandPosition - Variable in class nxopen.HumanPosturePredictionBuilder.ComputeHandCsysData
-
the position of right hand
- rightHandSide() - Method in interface nxopen.Expression
-
Returns the right hand side of the expression.
- rightJointType - Variable in class nxopen.uf.UFModl.FlangeData
-
- rightLineCfw - Variable in class nxopen.uf.UFTabnot.CellPrefs
-
- rightMargin() - Method in interface nxopen.diagramming.SheetBordersAndZonesBuilder
-
Returns the value of the margin in right border.
- rightMargin() - Method in interface nxopen.drawings.BordersAndZonesBuilder
-
- rightOffsetDistance() - Method in interface nxopen.features.shipdesign.AlongGuideCutBuilder
-
- rightRadiusBuilder() - Method in interface nxopen.cam.GrooveToolBuilder
-
Returns the right radius builder (inheritable double)
License requirements: cam_base ("CAM BASE")
.
- rightSideSelectPositioningFacetBodies() - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder
-
Returns the right side position facet objects of side barrier.
- rightSideSelectPositioningObject() - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder
-
Returns the right side position objects of side barrier.
- rightStabilizerBar() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
Returns the selection list containing the right stabilizer bar definition data.
- righttop - Variable in class nxopen.cae.xyplot.Graph.GridBoundingBoxData
-
- righttop - Variable in class nxopen.cae.xyplot.Plot.ViewBoundingBoxData
-
- rightTrimmedMargin() - Method in interface nxopen.diagramming.SheetMarginSettingsBuilder
-
Returns the value of the margin in right border.
- rightTrimmedMargin() - Method in interface nxopen.drawings.SheetMarginSettingsBuilder
-
Returns the right margin
License requirements: None.
- rightUntrimmedMargin() - Method in interface nxopen.diagramming.SheetMarginSettingsBuilder
-
Returns the distance between right of the sheet and right trimmed margin.
- rightUntrimmedMargin() - Method in interface nxopen.drawings.SheetMarginSettingsBuilder
-
Returns the right untrimmed margin
License requirements: None.
- rightView() - Method in interface nxopen.drawings.ViewCreationWizardBuilder
-
Returns the right view
License requirements: None.
- rightview - Variable in class nxopen.LayoutCollection.CreateSplitScreenLayoutAndNamedViewsData
-
View
- rightWidth() - Method in interface nxopen.features.OffsetEmbossBuilder
-
Returns the right width:
Width of pad to the right of the path curve.
- RIGID - Static variable in class nxopen.cae.connections.ConnectionType
-
Rigid
- Rigid - Interface in nxopen.cae.connections
-
Rigid connection.
- RIGID - Static variable in class nxopen.cam.DrillTapToolBuilder.ToolTapHolderTypeTypes
-
rigid
- rigid() - Method in interface nxopen.features.GroupFaceBuilder
-
Returns the rigid flag
License requirements: None.
- RIGID - Static variable in class nxopen.geometricutilities.AlongPathPattern.PathOptions
-
path is the selected section.
- RIGID - Static variable in class nxopen.GroupBuilder.SketchType
-
A sketch group which corresponds to a Rigid Sketch constraint
- RIGID_RING - Static variable in class nxopen.motion.TirePropertyTnoBuilder.DynamicsType
-
- RIGID_RING_WITH_INIT_STATICS - Static variable in class nxopen.motion.TirePropertyTnoBuilder.DynamicsType
-
- RIGID_SET - Static variable in class nxopen.uf.UFSket.ConType
-
- rigidBodies() - Method in interface nxopen.mechatronics.PhysicsManager
-
- rigidBody() - Method in interface nxopen.mechatronics.AccelerometerBuilder
-
Returns the Rigid Body.
- rigidBody() - Method in interface nxopen.mechatronics.DistanceSensorBuilder
-
Returns the Rigid Body.
- rigidBody() - Method in interface nxopen.mechatronics.InclinometerBuilder
-
Returns the Rigid Body.
- rigidBody() - Method in interface nxopen.mechatronics.ObjectTransformerBuilder
-
Returns the rigid body object.
- RigidBody - Interface in nxopen.mechatronics
-
Represents the Rigid Body class.
- rigidBody() - Method in interface nxopen.mechatronics.TransmitterExitBuilder
-
Returns the referenced moving rigid body.
- RigidBodyBuilder - Interface in nxopen.mechatronics
-
- RigidBodyBuilder.MassPropertiesOption - Class in nxopen.mechatronics
-
the mass property option.
- RigidBodyCollection - Interface in nxopen.mechatronics
-
Represents a collection of Rigid Body.
- rigidBodyTolerance() - Method in interface nxopen.cae.ModelUpdateOptionsBuilder
-
Returns the rigid body tolerance
License requirements: None.
- rigidBodyToleranceExp() - Method in interface nxopen.cae.responsesimulation.SolutionAttributes
-
Returns the tolerance expression
License requirements: nx_response_anlys ("NX Response Analysis")
.
- RigidEADBuilder - Interface in nxopen.cae
-
- RigidEADBuilder.Dof - Class in nxopen.cae
-
indicates if a dof is on or off
- RigidEADBuilder.State - Class in nxopen.cae
-
indicates to apply or clear the stiffness property upon commit
- rigidFace() - Method in interface nxopen.features.CoplanarBuilder
-
Returns the other faces
License requirements: None.
- rigidSetConstraintOption() - Method in interface nxopen.preferences.SessionSketch
-
- rimOffset() - Method in interface nxopen.features.vehicledesign.BaseDataWheelBuilder
-
Returns the rim offset.
- rimRoadGlobal() - Method in interface nxopen.motion.TirePropertyCdBuilder
-
Returns the rim road global frame.
- rimRoadTydexW() - Method in interface nxopen.motion.TirePropertyCdBuilder
-
Returns the rim road tydex-W frame.
- rimTydexCH() - Method in interface nxopen.motion.TirePropertyCdBuilder
-
Returns the rim Tydex-C and Tydex-H frames.
- RINFINGER01 - Static variable in class nxopen.HumanData.JointType
-
Indicate joint named rinfinger01
- RINFINGER02 - Static variable in class nxopen.HumanData.JointType
-
Indicate joint named rinfinger02
- RINGJOINT - Static variable in class nxopen.routing.ReuseLibrary.PartType
-
Ring Joint Post Placement Type
- ringjoints - Variable in class nxopen.routing.ReuseLibrary.SpecificationsGetConnectionPostPlacementData
-
- ringjoints - Variable in class nxopen.routing.ReuseLibrary.SpecificationsGetReportInBomData
-
Report Ring Joints
- RipedgeData() - Constructor for class nxopen.uf.UFModl.RipedgeData
-
- RipedgeData(int, Tag[], boolean, int, String, String, String, int) - Constructor for class nxopen.uf.UFModl.RipedgeData
-
- ripedges - Variable in class nxopen.uf.UFModl.RipedgeData
-
- ripSection() - Method in interface nxopen.features.sheetmetal.ConvertToSheetmetalBuilder
-
Returns the section containing curves that need to be ripped while converting to sheetmetal.
- rise() - Method in interface nxopen.linedesigner.StairwayEquipmentBuilder
-
Returns the vertical distance between two steps
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- RK2 - Static variable in class nxopen.cae.Post.IntegrationScheme
-
- RK4 - Static variable in class nxopen.cae.Post.IntegrationScheme
-
- RLIST_CMP_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- RLIST_CMP_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- RLIST_HRN_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- RLIST_HRN_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- RMAX_AMAX - Static variable in class nxopen.cam.InspectionMethodBuilder.PolarSequenceStartTypes
-
max Radius - max Angle
- RMAX_AMIN - Static variable in class nxopen.cam.InspectionMethodBuilder.PolarSequenceStartTypes
-
max Radius - min Angle
- RMIDFINGER11 - Static variable in class nxopen.HumanData.JointType
-
Indicate joint named rmidfinger11
- RMIDFINGER12 - Static variable in class nxopen.HumanData.JointType
-
Indicate joint named rmidfinger12
- RMIN_AMAX - Static variable in class nxopen.cam.InspectionMethodBuilder.PolarSequenceStartTypes
-
min Radius - max Angle
- RMIN_AMIN - Static variable in class nxopen.cam.InspectionMethodBuilder.PolarSequenceStartTypes
-
min Radius - min Angle
- rmiter - Variable in class nxopen.uf.UFModl.FlangeData
-
- RMS - Static variable in class nxopen.cae.FemSignalProcessingSignalAttributes.SpectrumScalings
-
RMS
- RMS - Static variable in class nxopen.cae.SignalProcessingPlotData.ScalingType
-
RMS
- RMS - Static variable in class nxopen.cae.SimLoadRecipeFunctionAttributes.ScalingType
-
RMS
- RmsLcrEvaluationMethod - Class in nxopen.cae.responsesimulation
-
Specifies the evaluation method for RMS or LCR calculation
- RMSPLY_STRAIN - Static variable in class nxopen.cae.Result.Quantity
-
- RMSPLY_STRESS - Static variable in class nxopen.cae.Result.Quantity
-
- RMSPLY_STRESS_VON_MISES - Static variable in class nxopen.cae.Result.Quantity
-
- RmsResultsEvaluationSetting - Interface in nxopen.cae.responsesimulation
-
Represents the parameters setting for RMS results evaluation in response analysis.
- RmsResultsEvaluationSettingBuilder - Interface in nxopen.cae.responsesimulation
-
- RMSSTRAIN - Static variable in class nxopen.cae.Result.Quantity
-
- RMSSTRESS - Static variable in class nxopen.cae.Result.Quantity
-
- RMSSTRESS_VON_MISES - Static variable in class nxopen.cae.Result.Quantity
-
- ROAD - Static variable in class nxopen.motion.AnalyticalContactBuilder.ProfileType
-
- ROAD - Static variable in class nxopen.motion.LmsSolverProperty.RoadHeightAdjustmentTypes
-
- Road - Interface in nxopen.motion
-
Represents a road
To create or edit an instance of this class, use
RoadBuilder
Created in NX11.0.0
- road() - Method in interface nxopen.motion.TireBuilder
-
Returns the road.
- ROAD2D - Static variable in class nxopen.motion.TirePropertyTnoBuilder.ContactMethodType
-
- ROAD3D - Static variable in class nxopen.motion.TirePropertyTnoBuilder.ContactMethodType
-
- ROAD_DATA_FILE - Static variable in class nxopen.motion.RoadBuilder.SurfaceDatatypeChoices
-
Road Data File
- RoadBuilder - Interface in nxopen.motion
-
- RoadBuilder.PathDatatypeChoices - Class in nxopen.motion
-
data type attribute of the path data
- RoadBuilder.SplineDatatypeChoices - Class in nxopen.motion
-
data type attribute of the spline data
- RoadBuilder.SurfaceDatatypeChoices - Class in nxopen.motion
-
data type attribute of the surface data
- RoadBuilder.TypeChoices - Class in nxopen.motion
-
type attribute of the road
- RoadCollection - Interface in nxopen.motion
-
Represents a collection of Road objects
To obtain an instance of this class, refer to
MotionManager
Created in NX11.0.0
- roadGlobal() - Method in interface nxopen.motion.TirePropertyCdBuilder
-
Returns the road center global.
- roadHeightAdjustment() - Method in interface nxopen.motion.LmsSolverProperty
-
Returns the road height adjustment
License requirements: None.
- roadObject() - Method in interface nxopen.motion.RoadBuilder
-
Returns the road object selected from motion objects
License requirements: mechanisms ("MECHANISMS")
.
- roads() - Method in interface nxopen.motion.MotionManager
-
- roadType() - Method in interface nxopen.motion.RoadBuilder
-
Returns the road type
License requirements: mechanisms ("MECHANISMS")
.
- ROBOT - Static variable in class nxopen.sim.KinematicChain.Types
-
Robot
- RobotCartesianMove - Interface in nxopen.cam
-
- RobotMountMove - Interface in nxopen.cam
-
- RobotMountMove.Types - Class in nxopen.cam
-
the mount Type enum .
- RobotPoseMove - Interface in nxopen.cam
-
- ROBUST_NEWTON_RAPSON - Static variable in class nxopen.motion.RecurdynSolverProperty.StaticIntegratorTypes
-
Robust newton rapson
- ROBUST_SELECTION - Static variable in class nxopen.Selection.UistylerSelectionType
-
reselect last
- ROCK - Static variable in class nxopen.annotations.AreaFillMaterial
-
Rock
- ROCK - Static variable in class nxopen.uf.UFDrf.AreaFillMaterial
-
- ROCK - Static variable in class nxopen.uf.UFDrf.ValidMaterial
-
- ROCKER_CAM - Static variable in class nxopen.tooling.DefineCamBuilder.Types
-
Rocker cam types
- rockerAxisBackstopOffset() - Method in interface nxopen.tooling.DefineCamBuilder
-
Returns the rocker axis backstop offset, which affects the initial position of rocker body
License requirements: None.
- rockerAxisDirection() - Method in interface nxopen.tooling.DefineCamBuilder
-
Returns the rocker axis direction that the rocker body rotates around
License requirements: None.
- rockerCamBodies() - Method in interface nxopen.tooling.DefineCamBuilder
-
Returns the rocker cam body
License requirements: None.
- rockerCamDirection() - Method in interface nxopen.tooling.DefineCamBuilder
-
Returns the rocker cam direction that the cam body moves along
License requirements: None.
- rockerCamRockerBodies() - Method in interface nxopen.tooling.DefineCamBuilder
-
Returns the rocker body of rocker cam
License requirements: None.
- rockerDriveBodies() - Method in interface nxopen.tooling.DefineCamBuilder
-
Returns the rocker drive body which drives the rotary body of rocker cam
License requirements: None.
- ROD - Static variable in class nxopen.motion.StandardSectionBuilder.StandardSectionType
-
Rod
- ROD - Static variable in class nxopen.uf.UFSf.ElementType
-
- rodDiameter() - Method in interface nxopen.features.LatticeBuilder
-
Returns the diameter/thickness of the rods in the lattice graph
License requirements: None.
- rodDiameter() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the testing rod diameter of the leg impact
License requirements: None.
- rodType() - Method in interface nxopen.mechatronics.HydraulicCylinderBuilder
-
Returns the rod type.
- rodType() - Method in interface nxopen.mechatronics.PneumaticCylinderBuilder
-
Returns the rod type.
- role() - Method in interface nxopen.pdm.SessionSettings
-
Returns the Teamcenter role in which the user acts.
- ROLL - Static variable in class nxopen.cam.DrillTapToolBuilder.ToolThreadFormMethodTypes
-
roll
- ROLL_AROUND - Static variable in class nxopen.cam.CornerControlBuilder.CornerControlMethods
-
Roll Around
- ROLL_AROUND - Static variable in class nxopen.cam.TurnCornerControl.Types
-
Corner Control Types is Roll Around.
- ROLL_AROUND - Static variable in class nxopen.cam.WedmGeomBuilder.ConvexCornerTypes
-
roll around
- ROLL_AROUND - Static variable in class nxopen.cam.WedmOperationBuilder.ConvexCornerTypes
-
roll around
- ROLL_AROUND - Static variable in class nxopen.weld.FilletBuilder.EnumConstructionMethod
-
- ROLL_IAX_SUSPENSION - Static variable in class nxopen.motion.TextBasedElementBuilder.TypeChoices
-
- rollAngle() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
Returns the roll angle that is used for the Five Link Solid Axle without steering suspension template.
- ROLLING - Static variable in class nxopen.annotations.FinishMethod
-
Specifies rolling finish
- ROLLING - Static variable in class nxopen.annotations.LineWeldDataBuilder.FinishSymbolType
-
- ROLLING_BALL - Static variable in class nxopen.features.AestheticFaceBlendBuilder.AlignmentType
-
Rolling Ball option will align the sections at contact point.
- ROLLING_BALL - Static variable in class nxopen.features.FaceBlendBuilder.Type
-
- ROLLING_BALL - Static variable in class nxopen.tooling.WallThicknessCheckerBuilder.CalculateMethod
-
Rolling ball
- rollingFriction() - Method in interface nxopen.mechatronics.CollisionMaterialBuilder
-
Returns the rolling friciton.
- rollingFrictionExpression() - Method in interface nxopen.mechatronics.PreferencesBuilder
-
Returns the rolling Friction Expression
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- RollingLine - Interface in nxopen.features.shipdesign
-
Represents a rolling line feature.
- RollingLineBuilder - Interface in nxopen.features.shipdesign
-
- RollingLineBuilder.ConstructionMethodTypes - Class in nxopen.features.shipdesign
-
The option to specify the method for creation of the pressure line.
- RollingLineBuilder.StartEvaluationTypes - Class in nxopen.features.shipdesign
-
The option for how the starting point for the evaluation of the sheet is to be created if
it is not given.
- RollingLineBuilder.Types - Class in nxopen.features.shipdesign
-
The option for the type of manufacturing operation to be performed on the sheet
to form it.
- rollingRadiusType() - Method in interface nxopen.motion.TirePropertyAdvancedParameters
-
Returns the rolling radius type.
- rollingRadiusValue() - Method in interface nxopen.motion.TirePropertyAdvancedParameters
-
Returns the rolling radius of the tire.
- rollingResistance() - Method in interface nxopen.motion.TirePropertyBasicParameters
-
Returns the rolling resistance coefficient of the tire.
- rollingResistance() - Method in interface nxopen.motion.TirePropertyNonInertialBuilder
-
Returns the rolling resistance coefficient of the tire.
- rollMoment() - Method in interface nxopen.motion.TirePropertyHighOrderParameters
-
Returns the roll moment.
- rollOntoEdge() - Method in interface nxopen.features.EdgeBlendBuilder
-
Returns the Roll onto edges option
License requirements: None.
- rolloverDelay() - Method in interface nxopen.display.SelPref
-
Returns the rollover delay
License requirements: None.
- rollOverSmoothEdge() - Method in interface nxopen.features.EdgeBlendBuilder
-
Returns the Roll over smooth edges option
License requirements: None.
- rollToolOverEdges() - Method in interface nxopen.cam.MillCutParameters
-
Returns the roll tool over edges toggle
License requirements: None.
- roofOffset() - Method in interface nxopen.features.vehicledesign.HeadImpactUpperRoofDetailBuilder
-
Returns the offset used to position point C and point D.
- roofRatio() - Method in interface nxopen.features.vehicledesign.HeadImpactUpperRoofDetailBuilder
-
Returns the ratio used to locate planes E, F, G, and H.
- ROOM - Static variable in class nxopen.features.shipdesign.ShipnamesBuilderType
-
- RoomAttributeListBuilder - Interface in nxopen.features.shipdesign
-
The builder to define room attributes .
- roomAttributes() - Method in interface nxopen.features.shipdesign.RoomAttributesBuilder
-
Returns the room attributes
License requirements: None.
- RoomAttributesBuilder - Interface in nxopen.features.shipdesign
-
- roomBodySelect() - Method in interface nxopen.features.shipdesign.RoomPanelBuilder
-
Returns the room body select
License requirements: None.
- RoomBuilder - Interface in nxopen.features.shipdesign
-
Represents a room builder for general arrangement.
- RoomBuilder.Types - Class in nxopen.features.shipdesign
-
The room types.
- RoomContainerBuilder - Interface in nxopen.features.shipdesign
-
- roomNamePrefix() - Method in interface nxopen.features.shipdesign.RoomContainerBuilder
-
Returns the room name prefix
License requirements: None.
- RoomPanelBuilder - Interface in nxopen.features.shipdesign
-
- RoomPanelBuilder.Types - Class in nxopen.features.shipdesign
-
Represents the type
- roomsSelection() - Method in interface nxopen.features.shipdesign.LabellingRoomsBuilder
-
Returns the rooms selection
License requirements: None.
- ROOT_LINE - Static variable in class nxopen.cam.ThreadTurningBuilder.DepthOptionTypes
-
Root Line
- ROOT_MEAN_SQUARE_ACCELERATION - Static variable in class nxopen.cae.Result.Quantity
-
- ROOT_MEAN_SQUARE_ANGULAR_ACCELERATION - Static variable in class nxopen.cae.Result.Quantity
-
- ROOT_MEAN_SQUARE_ANGULAR_VELOCITY - Static variable in class nxopen.cae.Result.Quantity
-
- ROOT_MEAN_SQUARE_APPLIED_FORCE - Static variable in class nxopen.cae.Result.Quantity
-
- ROOT_MEAN_SQUARE_APPLIED_MOMENT - Static variable in class nxopen.cae.Result.Quantity
-
- ROOT_MEAN_SQUARE_AXIAL_STRAIN - Static variable in class nxopen.cae.Result.Quantity
-
- ROOT_MEAN_SQUARE_AXIAL_STRESS - Static variable in class nxopen.cae.Result.Quantity
-
- ROOT_MEAN_SQUARE_BEAM_RESULTANTS - Static variable in class nxopen.cae.Result.Quantity
-
- ROOT_MEAN_SQUARE_BEAM_STRAIN_RESULTANT - Static variable in class nxopen.cae.Result.Quantity
-
- ROOT_MEAN_SQUARE_DISPLACEMENT - Static variable in class nxopen.cae.Result.Quantity
-
- ROOT_MEAN_SQUARE_ELEMENT_RESULTANT - Static variable in class nxopen.cae.Result.Quantity
-
- ROOT_MEAN_SQUARE_ELEMENT_RESULTANT_STRAIN - Static variable in class nxopen.cae.Result.Quantity
-
- ROOT_MEAN_SQUARE_PRESSURE - Static variable in class nxopen.cae.Result.Quantity
-
- ROOT_MEAN_SQUARE_REACTION_FORCE - Static variable in class nxopen.cae.Result.Quantity
-
- ROOT_MEAN_SQUARE_REACTION_FORCE_MPC - Static variable in class nxopen.cae.Result.Quantity
-
- ROOT_MEAN_SQUARE_REACTION_MOMENT - Static variable in class nxopen.cae.Result.Quantity
-
- ROOT_MEAN_SQUARE_REACTION_MOMENT_MPC - Static variable in class nxopen.cae.Result.Quantity
-
- ROOT_MEAN_SQUARE_ROTATION - Static variable in class nxopen.cae.Result.Quantity
-
- ROOT_MEAN_SQUARE_SHELL_RESULTANTS - Static variable in class nxopen.cae.Result.Quantity
-
- ROOT_MEAN_SQUARE_SHELL_STRAIN_RESULTANT - Static variable in class nxopen.cae.Result.Quantity
-
- ROOT_MEAN_SQUARE_SPRING_DASHPOT_RESULTANT - Static variable in class nxopen.cae.Result.Quantity
-
- ROOT_MEAN_SQUARE_SPRING_DASHPOT_STRAIN_RESULTANT - Static variable in class nxopen.cae.Result.Quantity
-
- ROOT_MEAN_SQUARE_STRAIN - Static variable in class nxopen.cae.Result.Quantity
-
- ROOT_MEAN_SQUARE_STRESS - Static variable in class nxopen.cae.Result.Quantity
-
- ROOT_MEAN_SQUARE_TORSION_STRAIN - Static variable in class nxopen.cae.Result.Quantity
-
- ROOT_MEAN_SQUARE_TORSION_STRESS - Static variable in class nxopen.cae.Result.Quantity
-
- ROOT_MEAN_SQUARE_VELOCITY - Static variable in class nxopen.cae.Result.Quantity
-
- ROOT_MEAN_SQUARE_VON_MISES_STRESS - Static variable in class nxopen.cae.Result.Quantity
-
- ROOT_NODE - Static variable in class nxopen.tooling.FastenerAssy.StackTypeMethod
-
Root node type
- ROOT_PART - Static variable in class nxopen.features.vehicledesign.MirrorCertificationBuilder.EyeFromOptionType
-
Represents eyellipse feature is from root part
- ROOT_PART - Static variable in class nxopen.tooling.RenameAndExportComponentBuilder.DefinitionType
-
- ROOT_PART_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
-
Root part occurrence
- rootComponent() - Method in interface nxopen.assemblies.ComponentAssembly
-
Returns the top-level component, i.e. the component at the root of the component
tree.
- rootComponent() - Method in interface nxopen.assemblies.DrawingExplosion
-
Returns the root component of the drawing explosion.
- rootComponent() - Method in interface nxopen.assemblies.Explosion
-
Returns the root component of the explosion.
- rootDesignElementRevision() - Method in interface nxopen.pdm.DesignSubordinateRevision
-
Returns the root reuse design element revision.
- rootLine() - Method in interface nxopen.cam.ThreadTurningBuilder
-
Returns the Root Line
License requirements: None.
- rootNode() - Method in interface nxopen.blockstyler.Tree
-
Returns the root node.
- RootObject - Interface in nxopen.routing
-
The
RootObject
is the parent
class of all other Routing logical objects.
- rootobjects - Variable in class nxopen.pdm.SmartSaveContext.WorkObjectToRootObjectMapData
-
array of root objects
- rootOffset() - Method in interface nxopen.cam.ThreadTurningBuilder
-
Returns the root offset
License requirements: None.
- rootOpening() - Method in interface nxopen.weld.EdgePrepValuesBuilder
-
Returns the root opening
License requirements: None.
- rootOpening() - Method in interface nxopen.weld.JointExitBuilder
-
Returns the desired gap between bodies being welded
License requirements: None.
- rootOpening() - Method in interface nxopen.weld.WeldGrooveBuilder
-
Returns the root opening
License requirements: ugweld ("UG WELD")
.
- rootPenetration() - Method in interface nxopen.weld.WeldGrooveBuilder
-
Returns the root penetration
License requirements: ugweld ("UG WELD")
.
- rootUpdate() - Method in interface nxopen.weld.GrooveBuilder
-
- ROSETTE45DEGREE_INCREMENT - Static variable in class nxopen.cae.responsesimulation.StrainGageType
-
Rosette 0-45-90
- ROSETTE60DEGREE_INCREMENT - Static variable in class nxopen.cae.responsesimulation.StrainGageType
-
Rosette 0-60-120
- ROTARY - Static variable in class nxopen.mechatronics.CamProfileBuilder.MasterValueUnit
-
Rotary
- ROTARY - Static variable in class nxopen.mechatronics.GraphControlBuilder.MasterJointType
-
Rotary
- ROTARY - Static variable in class nxopen.mechatronics.GraphControlBuilder.MasterValueUnit
-
Rotary
- ROTARY - Static variable in class nxopen.mechatronics.MotionProfileBuilder.MasterValueUnit
-
Rotary
- ROTARY - Static variable in class nxopen.presslinesimulation.UserMotionBuilder.MotionType
-
- ROTARY - Static variable in class nxopen.sim.KinematicAxisBuilder.AxisMotionType
-
rotary axis
- ROTARY - Static variable in class nxopen.tooling.UserDefinedMotionBuilder.MotionTypes
-
Rotary motion type
- ROTARY - Static variable in class nxopen.tooling.UserDefinedMotionBuilder.RotaryCurveTypes
-
Rotary motion curve type
- rotary1() - Method in interface nxopen.sim.KinematicChain
-
Returns the rotary1 axis of the kinematic chain
License requirements: None.
- rotary2() - Method in interface nxopen.sim.KinematicChain
-
Returns the rotary2 axis of the kinematic chain
License requirements: None.
- rotary3() - Method in interface nxopen.sim.KinematicChain
-
Returns the rotary3 axis of the kinematic chain
License requirements: None.
- rotary4() - Method in interface nxopen.sim.KinematicChain
-
Returns the rotary4 axis of the kinematic chain
License requirements: None.
- rotary5() - Method in interface nxopen.sim.KinematicChain
-
Returns the rotary5 axis of the kinematic chain
License requirements: None.
- rotary6() - Method in interface nxopen.sim.KinematicChain
-
Returns the rotary6 axis of the kinematic chain
License requirements: None.
- ROTARY_CAM - Static variable in class nxopen.tooling.DefineCamBuilder.Types
-
Rotary cam types
- ROTARY_FLOOR_FINISH - Static variable in class nxopen.cam.SurfaceContourBuilder.DriveMethodTypes
-
Rotary Floor Finish
- ROTARY_NC_AXIS - Static variable in class nxopen.sim.KinematicAxisBuilder.AxisMotionType
-
rotary NC-axis
- ROTARY_POSITION - Static variable in class nxopen.mechatronics.CamProfileBuilder.SlaveValueUnit
-
Rotary Position
- ROTARY_POSITION - Static variable in class nxopen.mechatronics.GraphControlBuilder.SlaveValueUnit
-
Rotary Position
- ROTARY_POSITION - Static variable in class nxopen.mechatronics.MotionProfileBuilder.SlaveValueUnit
-
Rotary Position
- ROTARY_SPEED - Static variable in class nxopen.mechatronics.CamProfileBuilder.SlaveValueUnit
-
Rotary Speed
- ROTARY_SPEED - Static variable in class nxopen.mechatronics.GraphControlBuilder.SlaveValueUnit
-
Rotary Speed
- ROTARY_SPEED - Static variable in class nxopen.mechatronics.MotionProfileBuilder.SlaveValueUnit
-
Rotary Speed
- ROTARY_UNLIMITED - Static variable in class nxopen.sim.KinematicAxisBuilder.AxisMotionType
-
rotary axis unlimited
- ROTARY_UNLIMITED_NC_AXIS - Static variable in class nxopen.sim.KinematicAxisBuilder.AxisMotionType
-
rotary unlimited NC-axis
- rotaryBackstopOffset() - Method in interface nxopen.tooling.DefineCamBuilder
-
Returns the rotary backstop offset, which affects the initial position of rotary cam body
License requirements: None.
- RotaryCam - Interface in nxopen.presslinesimulation
-
Represents a rotary cam used in a press line simulation.
- rotaryCamBodies() - Method in interface nxopen.tooling.DefineCamBuilder
-
Returns the rotary cam body
License requirements: None.
- RotaryCamBuilder - Interface in nxopen.presslinesimulation
-
- RotaryCamBuilderList - Interface in nxopen.presslinesimulation
-
Represents a list of objects.
- RotaryCamListBuilder - Interface in nxopen.presslinesimulation
-
- rotaryCurveType() - Method in interface nxopen.tooling.UserDefinedMotionBuilder
-
Returns the rotary curve type
License requirements: None.
- rotaryDirection() - Method in interface nxopen.tooling.DefineCamBuilder
-
Returns the rotary direction that the rotary body rotates around
License requirements: None.
- rotaryDriveBodies() - Method in interface nxopen.tooling.DefineCamBuilder
-
Returns the rotary drive body which drives the rotary body
License requirements: None.
- RotaryFinishGeomBuilder - Interface in nxopen.cam
-
Represents a rotary finish geometry builder.
- RotaryFinishGeomBuilder.PartAxisOfRotationTypes - Class in nxopen.cam
-
Available types for Part Axis of Rotation
- rotaryFloorFinishBuilder() - Method in interface nxopen.cam.SurfaceContourBuilder
-
Returns the rotary floor finish builder.
- rotaryMaxAngleLimit() - Method in interface nxopen.cam.MillCutParameters
-
Returns the rotary max angle limit
License requirements: None.
- rotaryMinAngleLimit() - Method in interface nxopen.cam.MillCutParameters
-
Returns the min angle from part axis
License requirements: None.
- rotaryMotionAxis() - Method in interface nxopen.tooling.UserDefinedMotionBuilder
-
Returns the rotary motion axis
License requirements: None.
- RotaryPointMoveBuilder - Interface in nxopen.cam
-
- RotaryPolarMoveBuilder - Interface in nxopen.cam
-
- RotaryPolarMoveBuilder.LockAxisDirection - Class in nxopen.cam
-
the lock axis type
- RotaryPolarMoveBuilder.LockPlaneType - Class in nxopen.cam
-
the lock plane type
- ROTATE - Static variable in class nxopen.cam.TurningOperationBuilder.TrackingPointType
-
rotate with holder
- ROTATE - Static variable in class nxopen.cam.TurnToolProbingBuilder.TrackingPointTypes
-
rotate with holder
- ROTATE - Static variable in class nxopen.features.StudioXformBuilder.Types
-
Deprecated.
Rotate type of Xform
- ROTATE - Static variable in class nxopen.features.StudioXformBuilderEx.Types
-
Rotate type of Xform
- ROTATE - Static variable in class nxopen.geometricanalysis.ReflectionAnalysisBuilder.ImageMovementTypes
-
Rotate image.
- rotate(TransformerData.ObjectType, double) - Method in interface nxopen.geometricutilities.TransformerData
-
Rotates the tool.
- rotate() - Method in interface nxopen.pid.EquipmentBuilder
-
Returns the symbol rotation angle.
- rotate() - Method in interface nxopen.pid.OffSheetConnectorBuilder
-
To rotate a off sheet connector
License requirements: nx_pid_design_author ("NX P and ID Design Author")
.
- rotate() - Method in interface nxopen.tooling.BlankLayoutBuilder
-
Returns the value to rotate the blank around the base point.
- ROTATE - Static variable in class nxopen.tooling.LayoutRepositionBuilder.Method
-
Rotate method
- Rotate() - Constructor for class nxopen.uf.UFPath.Rotate
-
- Rotate(double, UFPath.RotationObject, UFPath.RotationType, UFPath.Direction, boolean, boolean) - Constructor for class nxopen.uf.UFPath.Rotate
-
- rotate(double[], double) - Method in interface nxopen.uf.UFVec2
-
- rotate(Matrix3x3) - Method in interface nxopen.View
-
Rotates the view by concatenating the given matrix to the existing rotation
matrix of the view.
- rotate(Point3d, Vector3d, double) - Method in interface nxopen.View
-
Rotates the specified view using the specified origin of rotation
and about the specified axis.
- rotate(WCS.Axis, double) - Method in interface nxopen.WCS
-
Rotates the WCS about the specified axis.
- ROTATE180 - Static variable in class nxopen.mfg.am.Nester3D.Constraint
-
- ROTATE_ABOUT_AXIS - Static variable in class nxopen.features.MoveFaceBuilder.Types
-
Move faces by rotating about an axis
- ROTATE_ABOUT_LINE - Static variable in class nxopen.cam.InspectionOperationTransformBuilder.Transform
-
rotate about line
- ROTATE_ABOUT_LINE - Static variable in class nxopen.cam.OperationTransformBuilder.Transform
-
rotate about line
- ROTATE_ABOUT_POINT - Static variable in class nxopen.cam.InspectionOperationTransformBuilder.Transform
-
rotate about point
- ROTATE_ABOUT_POINT - Static variable in class nxopen.cam.OperationTransformBuilder.Transform
-
rotate about point
- ROTATE_BETWEEN_TWO_AXES - Static variable in class nxopen.features.MoveFaceBuilder.Types
-
Move faces by rotating the axis from the first to the second
- ROTATE_BY_THREE_POINTS - Static variable in class nxopen.geometricutilities.ModlMotion.Options
-
Move by Rotate by Three Points
- ROTATE_CLOCKWISE - Static variable in class nxopen.mechatronics.PositionControlBuilder.AngularPathOptions
-
rotate clockwise
- ROTATE_COUNTERCLOCKWISE - Static variable in class nxopen.mechatronics.PositionControlBuilder.AngularPathOptions
-
rotate counter-clockwise
- ROTATE_ONLY - Static variable in class nxopen.cae.ElementRotateBuilder.CopyType
-
rotate without copying elements
- ROTATE_ONLY - Static variable in class nxopen.cae.NodeRotateBuilder.CopyType
-
rotate only
- ROTATE_PCS - Static variable in class nxopen.cam.InspectionAlignmentBuilder.AlignTypes
-
Rotate the PCS
- ROTATE_TABLE - Static variable in class nxopen.cam.InspectionAlignmentBuilder.AlignTypes
-
Rotate table
- rotateAbout() - Method in interface nxopen.cam.ToolAxisAdvanced
-
Returns the rotate about
License requirements: None.
- rotateAboutAxis(double[], double) - Method in interface nxopen.uf.UFMtx3
-
- ROTATEABOUTOBJECTCENTER - Static variable in class nxopen.features.StudioXformBuilderEx.RotatingPivotType
-
Rotate pivot at the object center
- ROTATEABOUTPOINT - Static variable in class nxopen.features.StudioXformBuilderEx.RotatingPivotType
-
Rotate pivot at a point
- ROTATEABOUTSELECTED - Static variable in class nxopen.features.StudioXformBuilderEx.RotatingPivotType
-
Rotate pivot at the selected object
- rotateAlongZDirection() - Method in interface nxopen.assemblies.AddComponentBuilder
-
Rotate added components along Z direction by 90 degrees
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- rotateAngle() - Method in interface nxopen.cam.SplitSubopCommand
-
Returns the rotate angle value
License requirements: None.
- rotateAngle() - Method in interface nxopen.features.GeomcopyBuilder
-
Returns the angle dimension used for rotation type of instancing.
- rotateAngle() - Method in interface nxopen.tooling.LayoutRepositionBuilder
-
Returns the rotate angle
License requirements: None.
- rotateAngleDouble() - Method in interface nxopen.tooldesigner.MultiSectionBuilder
-
Returns the rotateAngleDouble
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- rotateAngleDouble() - Method in interface nxopen.tooldesigner.SetGunApproachBuilder
-
Returns the rotate angle double
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- rotateAngleOfReferenceVector() - Method in interface nxopen.display.ImageBaseBuilder
-
Returns the current rotation angle of image from aligned reference direction
License requirements: None.
- RotateAngleOption - Class in nxopen.pid
-
Represents the symbol rotation angle options.
- rotateButton() - Method in interface nxopen.cae.CorrelFineTuneAlignmentBuilder
-
The rotate button to nudge alignment by the defined angle via the selected angle vector
License requirements: nx_correl_base ("FE Correlation")
.
- rotateCenter() - Method in interface nxopen.facet.BestFitAlignBuilder
-
Returns the rotation center
License requirements: None.
- rotateCsys() - Method in interface nxopen.motion.LinkInitialVelocity
-
Returns the rotate csys.
- ROTATED_BASE_DATA - Static variable in class nxopen.features.vehicledesign.PendulumPlacementBuilder.PositionMethodType
-
- ROTATED_CONTACT - Static variable in class nxopen.features.vehicledesign.PendulumPlacementBuilder.PositionMethodType
-
- ROTATED_PLANE - Static variable in class nxopen.features.vehicledesign.PendulumPlacementBuilder.PositionMethodType
-
- ROTATED_PLANE_NORMAL - Static variable in class nxopen.features.vehicledesign.PendulumPlacementBuilder.PositionMethodType
-
- ROTATED_PLANE_X - Static variable in class nxopen.features.vehicledesign.PendulumPlacementBuilder.PositionMethodType
-
- rotatedAngleY() - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder
-
Returns the rotated angle about Y axis.
- rotatedAngleZ() - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder
-
Returns the rotated angle about Z axis.
- rotateDirection() - Method in interface nxopen.tooling.SlugRetentionBuilder
-
Returns the rotate direction
License requirements: None.
- rotateDisplayTextFlag() - Method in interface nxopen.cae.SimBCDisplay
-
Returns the true/false flag based on whether the text of the BC is
rotated in the graphics window
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- rotateDistance() - Method in interface nxopen.features.GeomcopyBuilder
-
Returns the distance dimension used for rotation type of instancing.
- rotateExpression() - Method in interface nxopen.motion.LinkInitialVelocity
-
- rotateImage(Tag, double) - Method in interface nxopen.uf.UFDrf
-
- rotateLeft() - Method in interface nxopen.display.ImageBaseBuilder
-
Rotates the image 90 degrees counter-clockwise.
- rotateMirrorFace() - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder
-
Returns the indication if the mirror face will be rotated.
- rotateOption() - Method in interface nxopen.pid.OffSheetConnectorBuilder
-
Returns the symbol rotation angle.
- rotatePlaceableObjectByAngle(double) - Method in interface nxopen.mechanicalrouting.PartPlacementBuilder
-
Rotates the fitting by the specified angle along the plane perpendicular to the vector defined by the engaged port.
- rotatePoint() - Method in interface nxopen.tooling.LayoutBuilder
-
Returns the rotate point
License requirements: None.
- rotatePoint() - Method in interface nxopen.tooling.LayoutRepositionBuilder
-
Returns the rotate point
License requirements: None.
- rotateRight() - Method in interface nxopen.display.ImageBaseBuilder
-
Rotates the image 90 degrees clockwise.
- rotateTableAngle() - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
Returns the angle to rotate table
License requirements: None.
- rotateTableAngularDeviation() - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
Returns the rotate table angular deviation
License requirements: None.
- rotateTableDirection() - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
Returns the rotate table direction
License requirements: None.
- rotateTableFeature() - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
Returns the feature used to position table
License requirements: None.
- rotateTableFeatureSelect() - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
Returns the feature selected to position table
License requirements: None.
- rotateTableMethod() - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
Returns the rotate table method
License requirements: None.
- rotateTableName() - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
Returns the name of rotary table to rotate
License requirements: None.
- rotateTablePcsUpdateOption() - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
Returns the rotate table pcs update
License requirements: None.
- RotateToolMoveBuilder - Interface in nxopen.cam
-
- rotateTrackingPoint() - Method in interface nxopen.cam.TurningOperationBuilder
-
- rotateType() - Method in interface nxopen.motion.LinkInitialVelocity
-
Returns the rotate type
License requirements: None.
- rotateVector() - Method in interface nxopen.geometricutilities.ModlMotion
-
- rotateVector() - Method in interface nxopen.motion.LinkInitialVelocity
-
Returns the rotate vector.
- rotateView(Tag, double[], double, int) - Method in interface nxopen.uf.UFView
-
- rotateViewAbsCsys(Tag, double[], double[], double, int) - Method in interface nxopen.uf.UFView
-
- rotatingArbitraryPlane() - Method in interface nxopen.features.StudioXformBuilderEx
-
Returns the rotating arbitrary plane
License requirements: None.
- rotatingArbitraryVector() - Method in interface nxopen.features.StudioXformBuilderEx
-
Returns the rotating arbitrary vector
License requirements: None.
- rotatingAxis() - Method in interface nxopen.features.StudioXformBuilderEx
-
Returns the rotating axis
License requirements: None.
- rotatingPivot() - Method in interface nxopen.features.StudioXformBuilder
-
- rotatingPivot() - Method in interface nxopen.features.StudioXformBuilderEx
-
Returns the rotating pivot
License requirements: None.
- rotatingPivotPoint() - Method in interface nxopen.features.StudioXformBuilderEx
-
Returns the rotating pivot point
License requirements: None.
- ROTATION - Static variable in class nxopen.cae.FrfSet.Measure
-
Rotation
- ROTATION - Static variable in class nxopen.cae.Result.Quantity
-
- rotation() - Method in interface nxopen.cam.HoleBossGeom
-
Returns the Rotation types
License requirements: None.
- rotation() - Method in interface nxopen.diagramming.SheetElementBuilder
-
Returns the rotation angle that is counter clockwise and relative to the owner.
- rotation() - Method in interface nxopen.display.DecalBuilder
-
Returns the decal rotation
License requirements: None.
- ROTATION - Static variable in class nxopen.features.GeomcopyBuilder.TransformTypes
-
rotation about an axis
- ROTATION - Static variable in class nxopen.features.vehicledesign.PedestrianProtectionBuilder.TransformMethods
-
Rotation method
- rotation - Variable in class nxopen.layout2d.Component.TransformData
-
- rotation - Variable in class nxopen.linedesigner.JigOnPlaneBuilder.JigPlaneParamsData
-
- ROTATION - Static variable in class nxopen.motion.GcouplerMovementTypes
-
Rotation movement type
- ROTATION - Static variable in class nxopen.motion.LinkCouplerCoupleBuilder.MeasurementChoices
-
Rotation
- rotation() - Method in interface nxopen.PlotBuilder
-
Returns the rotation of the banner.
- rotation - Variable in class nxopen.uf.UFModl.SymbThreadData
-
- ROTATION - Static variable in class nxopen.uf.UFMotion.MotionType
-
- rotation(double[], double[], double) - Method in interface nxopen.uf.UFMtx4
-
- ROTATION0 - Static variable in class nxopen.uf.UFPlot.Rotation
-
- ROTATION180 - Static variable in class nxopen.uf.UFPlot.Rotation
-
- ROTATION270 - Static variable in class nxopen.uf.UFPlot.Rotation
-
- ROTATION90 - Static variable in class nxopen.uf.UFPlot.Rotation
-
- ROTATION_ABSOLUTE - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
-
Absolute rotation
- ROTATION_ABSOLUTE - Static variable in class nxopen.uf.UFPath.RotationType
-
- ROTATION_ANGLE - Static variable in class nxopen.uf.UFPath.RotationType
-
- ROTATION_AROUND_LINE - Static variable in class nxopen.facet.BestFitAlignBuilder.ConstraintOptions
-
Rotation around specific line
- ROTATION_AROUND_POINT - Static variable in class nxopen.facet.BestFitAlignBuilder.ConstraintOptions
-
Rotation around specific point
- ROTATION_AXIS - Static variable in class nxopen.features.VirtualCurveBuilder.Types
-
Rotation axis
- ROTATION_INCREMENTAL - Static variable in class nxopen.uf.UFPath.RotationType
-
- ROTATION_LEVEL_CROSSING_RATE - Static variable in class nxopen.cae.Result.Quantity
-
- ROTATION_NONE - Static variable in class nxopen.uf.UFPath.RotationType
-
- ROTATION_OBJECT_AAXIS - Static variable in class nxopen.uf.UFPath.RotationObject
-
- ROTATION_OBJECT_BAXIS - Static variable in class nxopen.uf.UFPath.RotationObject
-
- ROTATION_OBJECT_CAXIS - Static variable in class nxopen.uf.UFPath.RotationObject
-
- ROTATION_OBJECT_HEAD - Static variable in class nxopen.uf.UFPath.RotationObject
-
- ROTATION_OBJECT_LAST_ELEMENT - Static variable in class nxopen.uf.UFPath.RotationObject
-
- ROTATION_OBJECT_TABLE - Static variable in class nxopen.uf.UFPath.RotationObject
-
- ROTATION_SPEED - Static variable in class nxopen.cae.BaseIteration.IterationValueType
-
Value represents a RotationSpeed
- ROTATION_SPEED - Static variable in class nxopen.cae.ResultProbeBuilder.SuperIterType
-
- ROTATION_SYMMETRY - Static variable in class nxopen.cae.optimization.TBSShapeLinkCondition.ManufacturingOption
-
Rotation symmetry definition
- ROTATION_TYPE_LAST_ELEMENT - Static variable in class nxopen.uf.UFPath.RotationType
-
- ROTATION_X - Static variable in class nxopen.cae.optimization.Response
-
- ROTATION_X - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
-
Nodal rotation around X-axis
- ROTATION_XABSOLUTE - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
-
Absolute nodal rotation around X-axis
- ROTATION_XY - Static variable in class nxopen.geometricutilities.TransformerData.ObjectType
-
- ROTATION_XZ - Static variable in class nxopen.geometricutilities.TransformerData.ObjectType
-
- ROTATION_Y - Static variable in class nxopen.cae.optimization.Response
-
- ROTATION_Y - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
-
Nodal rotation around Y-axis
- ROTATION_YABSOLUTE - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
-
Absolute nodal rotation around Y-axis
- ROTATION_YZ - Static variable in class nxopen.geometricutilities.TransformerData.ObjectType
-
- ROTATION_Z - Static variable in class nxopen.cae.optimization.Response
-
- ROTATION_Z - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
-
Nodal rotation around Z-axis
- ROTATION_ZABSOLUTE - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
-
Absolute nodal rotation around Z-axis
- ROTATIONAL - Static variable in class nxopen.motion.JointDefine.UniversalJointAxisType
-
Rotational Axis Type
- ROTATIONAL_DEFORMATION - Static variable in class nxopen.cae.Result.Quantity
-
- rotationalComponentEndA() - Method in interface nxopen.cae.DamperEADBuilder
-
Returns the rotational component end A of the damper element
License requirements: nx_masterfem ("Finite Element Modeling")
.
- rotationalComponentEndA() - Method in interface nxopen.cae.SpringEADBuilder
-
Returns the rotational component end A of the spring element
License requirements: nx_masterfem ("Finite Element Modeling")
.
- rotationalComponentEndB() - Method in interface nxopen.cae.DamperEADBuilder
-
Returns the rotational component end B of the damper element
License requirements: nx_masterfem ("Finite Element Modeling")
.
- rotationalComponentEndB() - Method in interface nxopen.cae.SpringEADBuilder
-
Returns the rotational component end B of the spring element
License requirements: nx_masterfem ("Finite Element Modeling")
.
- RotationalDDAMExcitation - Interface in nxopen.cae.responsesimulation
-
Represents an DDAM excitation.
- RotationalDDAMExcitationBuilder - Interface in nxopen.cae.responsesimulation
-
- rotationAllowed() - Method in interface nxopen.motion.JointDefine
-
Returns the options of allowing rotation.
- RotationalNodalFunctionExcitation - Interface in nxopen.cae.responsesimulation
-
- RotationalNodalFunctionExcitationBuilder - Interface in nxopen.cae.responsesimulation
-
- rotationalStictionTransitionVelocity() - Method in interface nxopen.motion.JointFrictionLms
-
Returns the rotational velocity tolerance
License requirements: None.
- rotationalStiffness() - Method in interface nxopen.cae.SpringEADBuilder
-
Returns the expression rotational stiffness operator gets spring rotational stiffness value
License requirements: nx_masterfem ("Finite Element Modeling")
.
- rotationalViscousDamping() - Method in interface nxopen.cae.DamperEADBuilder
-
Returns the expression rotational viscous damping operator gets damper rotational viscous damping value
License requirements: nx_masterfem ("Finite Element Modeling")
.
- rotationAngle() - Method in interface nxopen.cae.PostSelectionEntity
-
Returns the rotation angle selected
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- rotationAngle() - Method in interface nxopen.cae.responsesimulation.StrainGageBuilder
-
Returns the rotation angle, Only available when the strain gage's orientation plane type is
StrainGageOrientationPlane.CSYS
License requirements: nx_response_anlys ("NX Response Analysis")
Created in NX6.0.0
- rotationAngle() - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
Returns the rot angle
License requirements: None.
- rotationAngle() - Method in interface nxopen.cam.ToolAxisVariable
-
Returns the Rotation Angle
License requirements: None.
- rotationAngle() - Method in interface nxopen.Conic
-
Returns the rotation angle.
- rotationAngle() - Method in interface nxopen.DxfdwgImporter
-
Returns the Rotation Angle - The rotation angle value for transforming the model data
License requirements: None.
- rotationangle - Variable in class nxopen.Ellipse.ParametersData
-
In radians
- rotationAngle() - Method in interface nxopen.features.GlobalShapingBuilder
-
Returns the rotation angle value
License requirements: None.
- rotationAngle() - Method in interface nxopen.formboard.OrientBranchBuilder
-
- rotationAngle() - Method in interface nxopen.geometricutilities.HorizontalReference
-
Returns the rotation angle wrt horizontal reference direction
License requirements: None.
- rotationAngle() - Method in interface nxopen.routing.ClockPartBuilder
-
Returns the rotation angle applied to the component for rotation
License requirements: routing_base ("Routing Basic")
.
- rotationAngle() - Method in interface nxopen.SketchEllipseBuilder
-
Returns the rotation angle
License requirements: None.
- rotationAngle() - Method in interface nxopen.tooling.ElectrodeBlankBuilder
-
Returns the rotation angle of blank.
- rotationAngle() - Method in interface nxopen.tooling.UserDefinedMotionBuilder
-
Returns the rotation angle
License requirements: None.
- rotationAngle - Variable in class nxopen.uf.UFCurve.Conic
-
- rotationAngle - Variable in class nxopen.uf.UFPath.Rotate
-
- rotationAngleLaw() - Method in interface nxopen.features.GlobalShapingBuilder
-
Returns the rotation angle law
License requirements: None.
- rotationAngleReverseDirection() - Method in interface nxopen.features.GlobalShapingBuilder
-
Returns the rotation angle reverse direction
License requirements: None.
- rotationAngleType() - Method in interface nxopen.features.GlobalShapingBuilder
-
Returns the rotation angle type
License requirements: None.
- rotationArbitraryPlane() - Method in interface nxopen.features.StudioXformBuilder
-
- rotationArbitraryVector() - Method in interface nxopen.features.StudioXformBuilder
-
- rotationAxis() - Method in interface nxopen.cae.AxiSymmetricParameters
-
Returns the axes of rotation enum
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- rotationAxis() - Method in interface nxopen.cae.responsesimulation.TranslationalNodalFunctionExcitationBuilder
-
Returns the rotation axis
License requirements: nx_response_anlys ("NX Response Analysis")
.
- rotationAxis() - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
Returns the rot axis
License requirements: None.
- rotationAxis() - Method in interface nxopen.cam.ToolAxisVariable
-
Returns the Rotation Axis
License requirements: None.
- rotationAxis() - Method in interface nxopen.features.GeomcopyBuilder
-
Returns the rotation axis for rotation type of instancing.
- rotationAxis() - Method in interface nxopen.geometricanalysis.sectionanalysis.RadialBuilder
-
Returns a value indicating the type of the rotation axis
License requirements: None.
- rotationAxis() - Method in interface nxopen.geometricutilities.CircularPattern
-
Returns the rotation axis for the pattern.
- rotationAxis() - Method in interface nxopen.geometricutilities.HelixPattern
-
Returns the rotation axis for the pattern.
- rotationAxis() - Method in interface nxopen.geometricutilities.PolygonPattern
-
Returns the rotation axis for the pattern.
- rotationAxisColor() - Method in interface nxopen.cae.ModelDisplayBuilder
-
Returns the model rotation axis color
License requirements: nx_masterfem ("Finite Element Modeling")
.
- rotationAxisDisplaySwitch() - Method in interface nxopen.cae.ModelDisplayBuilder
-
Returns the model rotation axis display switch
License requirements: nx_masterfem ("Finite Element Modeling")
.
- rotationAxisFont() - Method in interface nxopen.cae.ModelDisplayBuilder
-
Returns the model rotation axis font
License requirements: nx_masterfem ("Finite Element Modeling")
.
- rotationAxisLineWidth() - Method in interface nxopen.cae.ModelDisplayBuilder
-
Returns the model rotation axis line width
License requirements: nx_masterfem ("Finite Element Modeling")
.
- rotationCenter() - Method in interface nxopen.geometricutilities.CircularPattern
-
Returns the rotation center for the 2d pattern.
- rotationCenter() - Method in interface nxopen.geometricutilities.PolygonPattern
-
Returns the rotation center for the 2d pattern.
- rotationCsys - Variable in class nxopen.uf.UFMotion.LinkInitialVel
-
- rotationDatumLetter() - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
Returns the rot datum letter
License requirements: None.
- rotationDimension() - Method in interface nxopen.SketchPolygonBuilder
-
Returns the angular dimension
License requirements: None.
- rotationDir - Variable in class nxopen.uf.UFMotion.LinkInitialVel
-
- rotationDirection() - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
Returns the rot dir
License requirements: None.
- rotationDirection() - Method in interface nxopen.features.StudioXformBuilder
-
- RotationDirection - Class in nxopen
-
Specifies rotation direction .
- rotationDirection - Variable in class nxopen.uf.UFPath.Rotate
-
- rotationDirection1 - Variable in class nxopen.assemblies.DegreesOfFreedom
-
First rotation direction.
- rotationDirection1Status - Variable in class nxopen.assemblies.DegreesOfFreedom
-
First rotation direction status.
- rotationDirection2 - Variable in class nxopen.assemblies.DegreesOfFreedom
-
Second rotation direction.
- rotationDirection2Status - Variable in class nxopen.assemblies.DegreesOfFreedom
-
Second rotation direction status.
- rotationDistance() - Method in interface nxopen.features.GlobalShapingBuilder
-
Returns the rotation distance value
License requirements: None.
- rotationDistanceLaw() - Method in interface nxopen.features.GlobalShapingBuilder
-
Returns the rotation distance law
License requirements: None.
- rotationFeature() - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
Returns the rot feature
License requirements: None.
- rotationFeatureSelect() - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
Returns the rot feature select
License requirements: None.
- rotationMethod() - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
Returns the rot method
License requirements: None.
- rotationObject - Variable in class nxopen.uf.UFPath.Rotate
-
- rotationPlane() - Method in interface nxopen.drawings.OrientationViewStyle
-
Returns the rotation plane.
- rotationPoint() - Method in interface nxopen.drawings.RevolvedSectionLineBuilder
-
- rotationPoint() - Method in interface nxopen.drawings.SectionLineSegmentsBuilder
-
Returns the rotation point
License requirements: None.
- rotationPointDelay() - Method in interface nxopen.preferences.SessionVisualizationScreen
-
Returns
License requirements: None.
- RotationSetBuilder - Interface in nxopen.geometricutilities
-
- RotationSetBuilderList - Interface in nxopen.geometricutilities
-
Represents a list of objects.
- rotationSetList() - Method in interface nxopen.features.StyledSweepBuilder
-
Returns the list of rotation sets
License requirements: None.
- rotationSpeedValue() - Method in interface nxopen.cae.ResultProbeBuilder
-
Returns the rotation speed value
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- rotationSymbolType() - Method in interface nxopen.drawings.ViewLabelBuilder
-
Returns the rotation symbol type
License requirements: None.
- rotationSymbolType() - Method in interface nxopen.drawings.ViewSectionLabelBuilder
-
Returns the rotation symbol type
License requirements: None.
- RotationSymbolTypes - Class in nxopen.drawings
-
Rotation symbol types
- rotationTargetCurve() - Method in interface nxopen.features.GlobalShapingBuilder
-
Returns the rotation target curve
License requirements: None.
- rotationType() - Method in interface nxopen.features.GlobalShapingBuilder
-
Returns the rotation type
License requirements: None.
- rotationType() - Method in interface nxopen.motion.DriverMotionsData
-
Returns the type of the rotations applied on the link
License requirements: mechanisms ("MECHANISMS")
.
- rotationType - Variable in class nxopen.uf.UFPath.Rotate
-
- rotationValue() - Method in interface nxopen.routing.OverstockBuilder
-
Returns the rotation value.
- rotationValue() - Method in interface nxopen.routing.StockBuilder
-
Returns the rotation value.
- rotationVector() - Method in interface nxopen.geometricanalysis.sectionanalysis.RadialBuilder
-
Returns the user specified rotation vector
License requirements: None.
- rotationVel - Variable in class nxopen.uf.UFMotion.LinkInitialVel
-
- rotationX() - Method in interface nxopen.motion.DriverMotionsData
-
Returns the rotation around the x axis
License requirements: mechanisms ("MECHANISMS")
.
- rotationXDirection() - Method in interface nxopen.drawings.OrientationViewStyle
-
Returns the rotation in x-direction for the drawing member view which stays
parallel to the x-axis drawing coordinate.
- rotationY() - Method in interface nxopen.motion.DriverMotionsData
-
Returns the rotation around the y axis
License requirements: mechanisms ("MECHANISMS")
.
- rotationZ() - Method in interface nxopen.motion.DriverMotionsData
-
Returns the rotation around the z axis
License requirements: mechanisms ("MECHANISMS")
.
- rotor(Feature) - Method in interface nxopen.die.DieCollection
-
Creates the die_rotor feature builder.
- Rotor - Interface in nxopen.features
-
Represents a Die CAM Rotor feature.
- RotorAttributesData() - Constructor for class nxopen.die.RotorSectionBuilder.RotorAttributesData
-
- RotorBuilder - Interface in nxopen.die
-
Represents a CAM Rotor feature builder.
- RotorBuilder.FlangeBendProfileData - Class in nxopen.die
-
- rotorInteria() - Method in interface nxopen.motion.PMDCMotorBuilder
-
Returns the rotor interia
License requirements: nx_motion_motor ("NX Motion Motor")
.
- rotorRotationAngle() - Method in interface nxopen.die.RotorBuilder
-
Returns the rotor rotation angle value of the rotor casting.
- RotorSectionBuilder - Interface in nxopen.die
-
Represents a Rotor Section sub feature.
- RotorSectionBuilder.RotorAttributesData - Class in nxopen.die
-
- rotorSolid() - Method in interface nxopen.die.RotorBuilder
-
Returns the rotor solid of the rotor casting.
- rotptObject - Variable in class nxopen.uf.UFDraw.AskRevolvedSxlineData
-
- rotrefFlag - Variable in class nxopen.uf.UFPath.Rotate
-
- ROUGH - Static variable in class nxopen.die.CompensateRoughDataBuilder.ApproximationType
-
Perform a rough approximation.
- ROUGH - Static variable in class nxopen.preferences.SessionVisualizationHighQualityImage.PlotQualityType
-
- RoughBrushFacetsRule - Interface in nxopen
-
- RoughBrushFacetsRule.Data - Class in nxopen
-
- roughBrushToolDirection - Variable in class nxopen.RoughBrushFacetsRule.Data
-
the vector defining direction of rough brush tool
- roughBrushToolRadius - Variable in class nxopen.RoughBrushFacetsRule.Data
-
the radius of rough brush tool
- roughBrushToolStartPoint - Variable in class nxopen.RoughBrushFacetsRule.Data
-
the start point of rough brush tool
- RoughFinishTurning - Interface in nxopen.cam
-
Represents a Turn Rough Finish operation
To create or edit an instance of this class, use
RoughFinishTurningBuilder
Created in NX7.5.0
- RoughFinishTurningBuilder - Interface in nxopen.cam
-
Represents a RoughFinishTurning Builder
This is an abstract class and cannot be instantiated.
- RoughFinishTurningBuilder.CustomMemberDataTypes - Class in nxopen.cam
-
the Custom Member Data types .
- RoughFinishTurningBuilder.CutRegionsTypes - Class in nxopen.cam
-
the Cut regions types .
- RoughFinishTurningBuilder.ExtendModeTypes - Class in nxopen.cam
-
the Extend Mode types .
- RoughFinishTurningBuilder.MaximumAreaModes - Class in nxopen.cam
-
the Maximum Area modes .
- RoughFinishTurningBuilder.MinimumAreaTypes - Class in nxopen.cam
-
the Mininmum Area types .
- RoughFinishTurningBuilder.MinmaxAreaUnits - Class in nxopen.cam
-
the Minimum/Maximum Area units .
- RoughFinishTurningBuilder.MinmaxSizeModes - Class in nxopen.cam
-
the Maximum/Maximum Size modes .
- RoughFinishTurningBuilder.MinmaxSizeUnits - Class in nxopen.cam
-
the Minimum/Maximum Size Axial/Radial units .
- RoughFinishTurningBuilder.MultiChannelTurningModeTypes - Class in nxopen.cam
-
the multi-channel turning mode types .
- RoughFinishTurningBuilder.RegionMachiningTypes - Class in nxopen.cam
-
the Region Machining types .
- RoughFinishTurningBuilder.RegionSelectionTypes - Class in nxopen.cam
-
the Region Selection types
- RoughFinishTurningBuilder.ToleranceOffsetTypes - Class in nxopen.cam
-
the Tolerance Offset types
- roughness - Variable in class nxopen.DisplayManager.J3dMaterial
-
surface roughness parameter
- ROUGHNESS_ON_NEGATIVE_SIDE - Static variable in class nxopen.cae.Result.Quantity
-
- ROUGHNESS_ON_POSITIVE_SIDE - Static variable in class nxopen.cae.Result.Quantity
-
- roughnessText() - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder
-
Returns the roughness text
License requirements: None.
- roughnessType() - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder
-
Returns the roughness enum
License requirements: None.
- roughOffset() - Method in interface nxopen.features.OffsetCurveBuilder
-
Returns the rough offset
License requirements: None.
- roughOffset() - Method in interface nxopen.tooling.ShimInnerProfileSetBuilder
-
Returns the rough offset
License requirements: None.
- RoughOffset() - Constructor for class nxopen.uf.UFModl.RoughOffset
-
- RoughOffset(Tag[], int, Tag, String, String, String, UFModl.RsoSurfMethod, UFModl.RsoSurfCtrlOption, int, UFModl.RsoTrimOption) - Constructor for class nxopen.uf.UFModl.RoughOffset
-
- roughPasses() - Method in interface nxopen.cam.WedmBasedGeomBuilder
-
Returns the Rough Passes
License requirements: cam_base ("CAM BASE")
.
- roughPassesBuilder() - Method in interface nxopen.cam.WedmGeomBuilder
-
Returns the rough_passes builder
License requirements: cam_base ("CAM BASE")
.
- roughPassesBuilder() - Method in interface nxopen.cam.WedmOperationBuilder
-
Returns the rough_passes builder
License requirements: cam_base ("CAM BASE")
.
- RoughTurning - Interface in nxopen.cam
-
Represents a Turn Rough operation
To create or edit an instance of this class, use
RoughTurningBuilder
Created in NX7.5.0
- RoughTurningBuilder - Interface in nxopen.cam
-
- RoughTurningBuilder.CleanupTypes - Class in nxopen.cam
-
the Cleanup types .
- RoughTurningBuilder.LevelDepthModeTypes - Class in nxopen.cam
-
the Level Depth Mode types .
- RoughTurningBuilder.PartOffDepthModeTypes - Class in nxopen.cam
-
the Part Off Depth Mode types .
- RoughTurningBuilder.PartOffPositionModeTypes - Class in nxopen.cam
-
the Part Off Position Mode types .
- RoughTurningBuilder.ReversalModeTypes - Class in nxopen.cam
-
the Reversal Mode types .
- ROUND - Static variable in class nxopen.cam.InspectionCparlnFeatureBuilder.EndTypes
-
Bounded slot/tab has round end
- ROUND - Static variable in class nxopen.cam.TurnConcaveCornerControl.Types
-
Concave Corner Control Type is Round.
- ROUND - Static variable in class nxopen.cam.TurnCornerControl.Types
-
Corner Control Types is Round.
- ROUND - Static variable in class nxopen.cam.TurnGrooveCornerControl.CornerTypes
-
Groove Corner Control corner type is Round.
- ROUND - Static variable in class nxopen.cam.TurningToolBuilder.HolderShankTypes
-
Round Shank
- ROUND - Static variable in class nxopen.cam.TurnToolBuilder.InsertShapes
-
Insert shape: Round
- ROUND - Static variable in class nxopen.facet.CreateTransitionBuilder.Types
-
- ROUND - Static variable in class nxopen.features.sheetmetal.BendOptions.BendReliefTypeOptions
-
igFilletBendRelief
- ROUND - Static variable in class nxopen.features.sheetmetal.ConvertToSheetmetalBuilder.BendReliefTypeOptions
-
- ROUND - Static variable in class nxopen.features.sheetmetal.GussetBuilder.Shapes
-
Specifies a round shape for the Gusset
- ROUND - Static variable in class nxopen.features.sheetmetal.HemFlangeBuilder.BendReliefOptions
-
- ROUND - Static variable in class nxopen.features.sheetmetal.ResizeBendRadiusBuilder.BendReliefTypeOptions
-
- ROUND - Static variable in class nxopen.features.vehicledesign.CloseRangeCameraListItemBuilder.Types
-
Round type
- ROUND - Static variable in class nxopen.tooling.CoolingDefineChannelBuilder.TipEndTypes
-
Round tip
- ROUND - Static variable in class nxopen.tooling.CoolingExtendBuilder.TipEndTypes
-
Round tip
- ROUND - Static variable in class nxopen.tooling.LsdynaGeometryPreparationBuilder.DrawBeadType
-
Draw bead section has round shape.
- ROUND_CAMBER - Static variable in class nxopen.features.shipdesign.DeckBuilder.Types
-
Mold face is being defined by a generated round camber shape.
- ROUND_EMBOSSING - Static variable in class nxopen.tooling.ForceCalculationBuilder.ProcessTypes
-
round embossing
- ROUND_IPW - Static variable in class nxopen.cam.TurnGrooveCornerControl.CornerTypes
-
Groove Corner Control corner type is Round (IPW).
- ROUND_STEP1 - Static variable in class nxopen.tooling.DieCavityAndSlugHoleBuilder.CavityTypeItems
-
the round step1 type
- ROUND_STEP1 - Static variable in class nxopen.tooling.PiercingInsertBuilder.NormalCavityType
-
the round step1 type
- ROUND_STEP2 - Static variable in class nxopen.tooling.DieCavityAndSlugHoleBuilder.CavityTypeItems
-
the round step2 type
- ROUND_STEP2 - Static variable in class nxopen.tooling.PiercingInsertBuilder.NormalCavityType
-
the round step2 type
- ROUND_TOP_TYPE - Static variable in class nxopen.uf.UFModl.SmpunchTopType
-
- ROUNDAFTERSTOCK - Static variable in class nxopen.cam.BoundaryTurnMemberCorner.ShapeType
-
- ROUNDBEFORESTOCK - Static variable in class nxopen.cam.BoundaryTurnMemberCorner.ShapeType
-
- roundCrossLinesPosition() - Method in interface nxopen.tooling.ElectrodeBlankBuilder
-
Returns the option to round the position of cross lines or not.
- roundDimensionValue() - Method in interface nxopen.tooling.WorkpieceBuilder
-
Returns the dimension round value
License requirements: None.
- ROUNDED_BOX - Static variable in class nxopen.annotations.IdSymbolBuilder.SymbolTypes
-
Rounded box
- ROUNDED_BOX - Static variable in class nxopen.annotations.PartsListBuilder.PartsListSymbolType
-
- ROUNDED_CROSS - Static variable in class nxopen.uf.UFDisp.PolyMarker
-
- ROUNDED_CROSS - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- ROUNDED_RECTANGLE - Static variable in class nxopen.diagramming.DiagrammingAnnotationboundarytype
-
Rounded Rectangle Type
- ROUNDED_RECTANGULAR - Static variable in class nxopen.die.PierceItemBuilder.HoleShapeType
-
Rouned Rectangular shaped hole
- ROUNDED_RECTANGULAR - Static variable in class nxopen.tooling.DieDesPierceInsertBuilder.HoleShapeTypes
-
- roundFeed() - Method in interface nxopen.cam.FeedsTurnBuilder
-
Returns the round feed builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
- roundFeetAndInches() - Method in interface nxopen.drafting.AutomationRuleBuilder
-
Returns the round feet and inches determine wheather or not to display dimension value
in inches and fractions to nearest specified value
License requirements: None.
- rounding() - Method in interface nxopen.cam.RoundPointBuilder
-
Returns the rounding status
License requirements: None.
- roundoffInsertXYPosition() - Method in interface nxopen.tooling.DieDesignSettingBuilder
-
Returns the option to roundoff insert X and Y position
License requirements: None.
- roundPoint() - Method in interface nxopen.cam.AlongToolAxisMoveBuilder
-
Returns the round point builder
License requirements: None.
- roundPoint() - Method in interface nxopen.cam.DeltaMoveBuilder
-
Returns the round point builder
License requirements: None.
- roundPoint() - Method in interface nxopen.cam.FaceMillingBuilder
-
Returns the Round Point Output builder
License requirements: cam_base ("CAM BASE")
.
- roundPoint() - Method in interface nxopen.cam.MoveToPointBuilder
-
Returns the round point builder
License requirements: None.
- roundPoint() - Method in interface nxopen.cam.NormalToToolAxisMoveBuilder
-
Returns the round point builder
License requirements: None.
- roundPoint() - Method in interface nxopen.cam.RotaryPointMoveBuilder
-
Returns the round point builder
License requirements: None.
- roundPoint() - Method in interface nxopen.cam.RotaryPolarMoveBuilder
-
Returns the round point builder
License requirements: None.
- roundPoint() - Method in interface nxopen.cam.TurnMoveToPointBuilder
-
Returns the round point builder
License requirements: None.
- RoundPointBuilder - Interface in nxopen.cam
-
Represents the round Point Builder .
- RoundPointBuilder.Output - Class in nxopen.cam
-
the decimal places
- roundPosition() - Method in interface nxopen.tooling.ElectrodeDeleteBuilder
-
Returns the option to round electrode position.
- roundPrecision() - Method in interface nxopen.tooling.WorkpieceBuilder
-
Returns the round precision
License requirements: None.
- roundTip() - Method in interface nxopen.tooling.CoolingExtendBuilder
-
Returns the flag to indicate whether to create round tip or not.
- route() - Method in interface nxopen.UFSession
-
- ROUTE_FLOW_EITHER - Static variable in class nxopen.routing.Port.FlowDirectionType
-
- ROUTE_FLOW_IN - Static variable in class nxopen.routing.Port.FlowDirectionType
-
- ROUTE_FLOW_OUT - Static variable in class nxopen.routing.Port.FlowDirectionType
-
- ROUTE_FOR_REQUEST - Static variable in class nxopen.features.shipdesign.VerifyPenetrationBuilder.SelectionDialogType
-
- ROUTE_FOR_VERIFY - Static variable in class nxopen.features.shipdesign.VerifyPenetrationBuilder.SelectionDialogType
-
- ROUTE_PIPE_RUN - Static variable in class nxopen.pdm.FileManagement.FileType
-
- ROUTE_PIPE_RUN_ATTACHMENT - Static variable in class nxopen.pdm.FileManagement.FileType
-
- ROUTE_PIPE_SPEC - Static variable in class nxopen.pdm.FileManagement.FileType
-
- routeAssignCornerCornerBlock() - Method in interface nxopen.routing.AssignCornerBuilder
-
Returns the route assign corner corner block
License requirements: routing_base ("Routing Basic")
.
- routeAssignCornerEndObject() - Method in interface nxopen.routing.AssignCornerBuilder
-
Returns the route assign corner end objects.
- routeAssignCornerRouteSelection() - Method in interface nxopen.routing.AssignCornerBuilder
-
Returns the routing object colletor
License requirements: routing_base ("Routing Basic")
.
- routeAssignCornerStartObject() - Method in interface nxopen.routing.AssignCornerBuilder
-
Returns the route assign corner start objects.
- routeCornerAlternateSolution() - Method in interface nxopen.routing.CornerTypeBuilder
-
Route alternate solution
License requirements: routing_base ("Routing Basic")
.
- routeCornerBendMethods() - Method in interface nxopen.routing.CornerTypeBuilder
-
Returns the route corner bend options
License requirements: routing_base ("Routing Basic")
.
- routeCornerBendOptions() - Method in interface nxopen.routing.CornerTypeBuilder
-
- routeCornerBendRadiusInfo() - Method in interface nxopen.routing.CornerTypeBuilder
-
Bend corner info
License requirements: routing_base ("Routing Basic")
.
- routeCornerBendTable() - Method in interface nxopen.routing.CornerTypeBuilder
-
Returns the name of bend radius table
License requirements: routing_base ("Routing Basic")
.
- routeCornerImportBendRadiusTable() - Method in interface nxopen.routing.CornerTypeBuilder
-
Import bend radius table
License requirements: routing_base ("Routing Basic")
.
- routeCornerNumberOfMiters() - Method in interface nxopen.routing.CornerTypeBuilder
-
Returns the number of miter in mitered bend corner
License requirements: routing_base ("Routing Basic")
.
- routeCornerRadius() - Method in interface nxopen.routing.CornerTypeBuilder
-
Returns the route corner radius
License requirements: routing_base ("Routing Basic")
.
- routeCornerRatioToDiameter() - Method in interface nxopen.routing.CornerTypeBuilder
-
Returns the route corner ratio to diameter
License requirements: routing_base ("Routing Basic")
.
- routeCornerRequireLinearSolution() - Method in interface nxopen.routing.CornerTypeBuilder
-
Returns the route corner require linear solution
License requirements: routing_base ("Routing Basic")
.
- routeCornerSpecifyElbow() - Method in interface nxopen.routing.CornerTypeBuilder
-
Route specify elbow
License requirements: routing_base ("Routing Basic")
.
- routeCornerTypeOptions() - Method in interface nxopen.routing.CornerTypeBuilder
-
Returns the route corner type options
License requirements: routing_base ("Routing Basic")
.
- routeCustomManager() - Method in interface nxopen.Session
-
- ROUTED - Static variable in class nxopen.preferences.RoutingElectrical.CreateTerminalsType
-
Create terminals to routed terminals
- ROUTEDAND_UNROUTED_CONNECTIONS - Static variable in class nxopen.annotations.PinListBuilder.FilterType
-
- routeInvokeCallback(String, int, Tag) - Method in interface nxopen.uf.UFUi
-
- RouteLogicalAssociation - Interface in nxopen.routing
-
RouteLogicalAssociation object associates non-electrical components to
electrical components.
- RouteLogicalAssociationCollection - Interface in nxopen.routing
-
Collection class for RouteLogicalAssociation object
To obtain an instance of this class, refer to
RouteManager
Created in NX4.0.0
- routeLogicalAssociations() - Method in interface nxopen.routing.RouteManager
-
RouteLogicalAssociation Collection .
- routeManager() - Method in interface nxopen.Part
-
Returns the RouteManager for this part .
- RouteManager - Interface in nxopen.routing
-
Manages various Routing collections and methods for use in the current work part.
- RouteManager.BomBlankLines - Class in nxopen.routing
-
Controls how line items are reported in the Parts List.
- RouteManager.BomFabrication - Class in nxopen.routing
-
Is the fabrication numbering option on or off?
- RouteManager.BomLevel - Class in nxopen.routing
-
Describes how fabrications are reported on the Bill of Material (BOM).
- RouteManager.BomStockLength - Class in nxopen.routing
-
Describes how system reports the lengths of the stock.
- RouteManager.ColumnStatus - Class in nxopen.routing
-
Hidden status of a column.
- RouteManager.ConvertSplineSegmentsData - Class in nxopen.routing
-
- RouteManager.FindObjectType - Class in nxopen.routing
-
The types of objects for which FindRoutingObject will search.
- RouteManager.FixPosition - Class in nxopen.routing
-
Allows the position of new component to be fixed during the replacement operation.
- RouteManager.GenerateCablewaysLayoutData - Class in nxopen.routing
-
- RouteManager.ImportMode - Class in nxopen.routing
-
Route List import modes
The following tables describes the effects of the various modes
depending on the type (XML, HRN, CMP) of import.
- RouteManager.ModelConnectionPostPlacementGasketBetweenFlangesData - Class in nxopen.routing
-
- RouteManager.ModelConnectionPostPlacementGasketData - Class in nxopen.routing
-
- RouteManager.PartType - Class in nxopen.routing
-
Collector types for Routing information
- RouteManager.RootType - Class in nxopen.routing
-
Type of root nodes.
- RouteManager.SearchCriteria - Class in nxopen.routing
-
Fill in this information with as much as you know about the object you want to find.
- RouteObject - Interface in nxopen.routing
-
The Top level routing data model object.
- routeObjectCollector() - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder
-
Returns the route object collector
License requirements: None.
- routeObjectCollector() - Method in interface nxopen.formboard.PathLengthAnnotationBuilder
-
Returns the route object collector
License requirements: routing_harness ("Routing Harness")
.
- routeObjectCollector() - Method in interface nxopen.routing.AssignPathBuilder
-
Returns the route object collector
License requirements: routing_base ("Routing Basic")
.
- routeObjectCollector() - Method in interface nxopen.routing.BulkReplacementBuilder
-
Returns the Routing object collector
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- routeObjectCollector() - Method in interface nxopen.routing.DuctSizeCalculatorBuilder
-
Returns the route object collector Stores the routing segments for which calculations are to be done
License requirements: routing_hvac ("Routing HVAC")
.
- routeObjectCollector() - Method in interface nxopen.routing.EditCharacteristicsBuilder
-
Returns the routing objects to edit characteristics.
- routeObjectCollector() - Method in interface nxopen.routing.electrical.CablewaysBuilder
-
Returns the route object collector
License requirements: routing_cabling ("Routing Cabling")
.
- RouteObjectCollector - Interface in nxopen.routing
-
- routeObjectCollector() - Method in interface nxopen.routing.UnifyPathBuilder
-
Returns the routing object collector to select objects to unify.
- RoutePartDescriptor - Interface in nxopen.routing
-
Represents a part descriptor chrx.
- RoutePartDescriptor.CharxType - Class in nxopen.routing
-
- RoutePartDescriptor.SourceType - Class in nxopen.routing
-
- RoutePartDescriptorCollection - Interface in nxopen.routing
-
- routePartDescriptors() - Method in interface nxopen.routing.RouteManager
-
RoutePartDescriptor collection .
- routePenetrating() - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder
-
Returns the route penetrating
License requirements: None.
- routeReplacePart(Component, Part, String, String, int) - Method in interface nxopen.routing.RouteManager
-
Replace part
License requirements: routing_base ("Routing Basic")
.
- routeRun() - Method in interface nxopen.UFSession
-
- routes - Variable in class nxopen.uf.UFRoute.AskSegmentRoutesData
-
- routeSegment() - Method in interface nxopen.routing.QuickPathBuilder
-
Returns the routing segment managed by the builder, if it exists.
- RouteSegmentFont - Interface in nxopen.routing
-
Represents a route segment font.
- RouteSegmentFontElement - Interface in nxopen.routing
-
Represents a route segment font element.
- routeSelection() - Method in interface nxopen.routing.FillerStockBuilder
-
Returns the route selection which allows selection of routing objects
License requirements: routing_harness ("Routing Harness")
.
- routeSelectionStock() - Method in interface nxopen.routing.CreateFabricationBuilder
-
Returns the route selection stock for selecting routing objects
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- routeSelectionStock() - Method in interface nxopen.routing.StockStyleBuilder
-
Returns the route selection stock for selecting routing objects
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- routeStockPickColor() - Method in interface nxopen.routing.StockColorBuilder
-
Returns the route stock pick color
License requirements: routing_harness ("Routing Harness")
.
- routeStockSelectStockFace() - Method in interface nxopen.routing.StockColorBuilder
-
Returns the route stock select stock face
License requirements: routing_harness ("Routing Harness")
.
- RouteSweptFoldBuilder - Interface in nxopen.routing
-
- RouteSweptTwistBuilder - Interface in nxopen.routing
-
- RouteSweptTwistBuilder.AskExistingTwistData - Class in nxopen.routing
-
- ROUTING - Static variable in class nxopen.mechanicalrouting.PartPlacementBuilder.PositionAsType
-
position as inline routing fitting
- ROUTING - Static variable in class nxopen.tooling.AddReusablePart.PositionMethod
-
Position using Routing
- ROUTING - Static variable in class nxopen.weld.WeldJointBuilder.Application
-
Routing Application.
- ROUTING_ELECTRICAL - Static variable in class nxopen.FileNewApplication
-
Deprecated.
Specifies an electrical routing file new template
- ROUTING_LOGICAL - Static variable in class nxopen.FileNewApplication
-
Deprecated.
Specifies a logical routing file new template
- ROUTING_MECHANICAL - Static variable in class nxopen.FileNewApplication
-
Deprecated.
Specifies a mechanical routing file new template
- ROUTING_OBJECT - Static variable in class nxopen.features.PartGeometryCopyBuilder.Type
-
Routing Object
- ROUTING_OBJECT - Static variable in class nxopen.routing.AlignStockBuilder.StockAlignmentMethod
-
- ROUTING_OBJECT_LINK - Static variable in class nxopen.features.WaveLinkBuilder.Types
-
- ROUTING_PATH_LENGTH - Static variable in class nxopen.formboard.PathLengthAnnotationBuilder.Types
-
TODO
- ROUTING_PATH_LENGTH - Static variable in class nxopen.GenericMeasure.Type
-
- ROUTING_PATH_LENGTH - Static variable in class nxopen.MeasureDistanceBuilder.DistanceType
-
- ROUTING_POINT_TYPE - Static variable in class nxopen.uf.UFDrf.ObjectAssocPointType
-
- RoutingApplicationView - Interface in nxopen.preferences
-
The RoutingApplicationView class contains all of the various preferences and options
available from the Routing Application View file.
- routingApplicationView() - Method in interface nxopen.preferences.SessionPreferences
-
Returns the Routing Application View preferences.
- RoutingApplicationView.AppType - Class in nxopen.preferences
-
Routing application types
- RoutingAttributeIdentifierType - Class in nxopen.routing
-
Defines the attribute identifier types
- routingBillOfMaterial() - Method in interface nxopen.annotations.TableEditSettingsBuilder
-
Returns the table routing Bill of Materail builder
License requirements: None.
- RoutingBulkReplacementBuilderLibrarySelectSourceType - Class in nxopen.routing
-
Defines the library select source.
- RoutingBulkReplacementBuilderReplacementMethodType - Class in nxopen.routing
-
Defines the replacement method type.
- RoutingBulkReplacementBuilderRetainReasonType - Class in nxopen.routing
-
Defines the reason why the object has been retained.
- RoutingCharacteristics - Interface in nxopen.preferences
-
Contains all of the various preferences for option and required characteristics.
- routingComponent() - Method in interface nxopen.features.shipdesign.ShipCoordinatesBuilder
-
Returns the routing component.
- routingElectrical() - Method in interface nxopen.preferences.RoutingApplicationView
-
Routing electrical preferences structure .
- RoutingElectrical - Interface in nxopen.preferences
-
The RoutingElectrical object stores a set of route electrical
preferences.
- RoutingElectrical.ComponentMatchType - Class in nxopen.preferences
-
Manual/Auto Assign component uses the component match method to determine
which component(s) are candidates for assignment to a component list record.
- RoutingElectrical.CreateTerminalsType - Class in nxopen.preferences
-
How to create terminal segments (if creating terminal segments).
- routingLevel() - Method in interface nxopen.routing.EditCharacteristicsBuilder
-
Returns the Routing Level associated with selected objects.
- routingLogical() - Method in interface nxopen.preferences.RoutingApplicationView
-
Routing logical preferences .
- RoutingLogical - Interface in nxopen.preferences
-
The RoutingLogical object stores a set of route logical preferences.
- RoutingLogical.FlowArrowEnumType - Class in nxopen.preferences
-
How to create terminal segments (if creating terminal segments).
- RoutingManager - Interface in nxopen.mechanicalrouting
-
- RoutingManagerFactory - Class in nxopen.mechanicalrouting
-
- RoutingManagerFactory() - Constructor for class nxopen.mechanicalrouting.RoutingManagerFactory
-
- RoutingMeasureDistanceBuilder - Interface in nxopen.routing
-
- routingMechanical() - Method in interface nxopen.preferences.RoutingApplicationView
-
Routing mechanical preferences .
- RoutingMechanical - Interface in nxopen.preferences
-
The RoutingMechanical object stores a set of route mechanical preferences.
- RoutingMechanical.LineColorType - Class in nxopen.preferences
-
Describes the Line color string definition types.
- routingObject() - Method in interface nxopen.features.PartGeometryCopySelectBuilder
-
Returns the routing object
License requirements: None.
- routingObject() - Method in interface nxopen.weld.JointItemBuilder
-
Returns the routing port.
- routingObjectCollector() - Method in interface nxopen.features.shipdesign.VerifyPenetrationBuilder
-
Returns the route object collector
License requirements: None.
- routingObjects() - Method in interface nxopen.features.WaveRoutingBuilder
-
Returns the routing
License requirements: None.
- routingObjects() - Method in interface nxopen.routing.RouteObjectCollector
-
Returns the selected routing object list
License requirements: routing_base ("Routing Basic")
.
- RoutingPart - Interface in nxopen.preferences
-
Contains the preferences related to placing/finding/adding parts and generating
the Routing bill of materials.
- RoutingPart.DetailLevel - Class in nxopen.preferences
-
The detail levels available for the Routing bill of material.
- RoutingPart.FabricationNumbering - Class in nxopen.preferences
-
The fabrication numbering methods available for the Routing bill of material.
- RoutingPart.PreferredPortAttributeData - Class in nxopen.preferences
-
- RoutingPart.PreferredPortMethod - Class in nxopen.preferences
-
Available methods for determining which port is the preferredport during
calculation of placement solutions.
- RoutingPart.StockLengthDisplay - Class in nxopen.preferences
-
The stock length display options available for the Routing bill of material.
- RoutingPart.UsePreferredPort - Class in nxopen.preferences
-
Whether or not use the preferred port when determining placement solutions.
- RoutingPartLibrary - Interface in nxopen.preferences
-
Represents a Routing Part library.
- RoutingPartLibrary.Column - Class in nxopen.preferences
-
Part table column type.
- RoutingPartLibrary.ColumnStatus - Class in nxopen.preferences
-
Hidden status of a column.
- RoutingPartLibrary.ColumnType - Class in nxopen.preferences
-
Type of column values.
- RoutingPartLibrary.NodeType - Class in nxopen.preferences
-
Type of nodes in the part library.
- RoutingPartLibrary.RootType - Class in nxopen.preferences
-
Type of root nodes.
- routingParts() - Method in interface nxopen.routing.FittingOverstockBuilder
-
Returns the qualifed routing parts to apply overstock to.
- routingPath() - Method in interface nxopen.preferences.RoutingApplicationView
-
Path preferences structure .
- RoutingPath - Interface in nxopen.preferences
-
The RoutingPath object stores a set of path preferences.
- RoutingPath.AddPointsToSpline - Class in nxopen.preferences
-
Should points be added to existing spline when they are subdivided to preserve shape?
- RoutingPath.AllowedCornerType - Class in nxopen.preferences
-
Describes the types of corners allowed in a routing application.
- RoutingPath.ChainMethod - Class in nxopen.preferences
-
Path curve chaining methods
- RoutingPath.ConfirmBranchSel - Class in nxopen.preferences
-
Should a branch selection confirmation dialog be show during Path selection?
- RoutingPath.ContinueUpdOnError - Class in nxopen.preferences
-
Should fixed length splines ignore length constraint violations and update?
- RoutingPath.CreateSlopeConstraints - Class in nxopen.preferences
-
Create slope associativity constraints during line path creation [from ports only]
- RoutingPath.CreateSmartRcps - Class in nxopen.preferences
-
Should Smart RCPs be created during path creation in Create Path?
- RoutingPath.CreateTangency - Class in nxopen.preferences
-
Should new splines form tangencies with existing splines when they're created?
- RoutingPath.CurveType - Class in nxopen.preferences
-
Describes the types of curves allowed in a routing application.
- RoutingPath.DefaultCornerType - Class in nxopen.preferences
-
Describes the types of corners allowed in a routing application.
- RoutingPath.DisplayObject - Class in nxopen.preferences
-
Display a certain routing object?
- RoutingPath.MergeDupRcps - Class in nxopen.preferences
-
Should duplicate RCPs be merged after a Transform [Move or Copy] operation?
- RoutingPath.OccChainable - Class in nxopen.preferences
-
Chain occurrences of curves ?
- RoutingPath.RadiusMethod - Class in nxopen.preferences
-
Describes method used to determine bend radius on a bend or sbend corner
- RoutingPath.RadiusUnits - Class in nxopen.preferences
-
- RoutingPathLengthData() - Constructor for class nxopen.Measurement.RoutingPathLengthData
-
- routingSelection() - Method in interface nxopen.routing.RoutingMeasureDistanceBuilder
-
- routingStock() - Method in interface nxopen.preferences.RoutingApplicationView
-
Stock preferences structure .
- RoutingStock - Interface in nxopen.preferences
-
The Preferences for Routing Stock objects.
- RoutingStock.DefaultStockData - Class in nxopen.preferences
-
- RoutingStock.SpaceReservationModeFlag - Class in nxopen.preferences
-
Describes the valid value for space reservation mode.
- RoutingStock.StockModeFlag - Class in nxopen.preferences
-
Describes the valid value for stock mode.
- RoutingSystem - Interface in nxopen.routing
-
Routing object is a collection of
Run
objects.
- RoutingSystemCollection - Interface in nxopen.routing
-
- routingSystems() - Method in interface nxopen.routing.RouteManager
-
RoutingSystem Collection .
- routingUserPreferences() - Method in interface nxopen.preferences.RoutingApplicationView
-
Routing user preferences .
- RoutingUserPreferences - Interface in nxopen.preferences
-
Allows access to the User Preferences section of the Routing Application View file.
- RoutingUserPreferences.DoubleArrayPreferenceData - Class in nxopen.preferences
-
- RoutingUserPreferences.DoublePreferenceData - Class in nxopen.preferences
-
- RoutingUserPreferences.IntegerArrayPreferenceData - Class in nxopen.preferences
-
- RoutingUserPreferences.IntegerPreferenceData - Class in nxopen.preferences
-
- RoutingUserPreferences.StringArrayPreferenceData - Class in nxopen.preferences
-
- RoutingUserPreferences.StringPreferenceData - Class in nxopen.preferences
-
- ROW - Static variable in class nxopen.geometricutilities.CircularPattern.StaggerOptions
-
Stagger row
- ROW - Static variable in class nxopen.geometricutilities.RectangularPattern.StaggerOptions
-
Stagger row
- row - Variable in class nxopen.uf.UFDraw.TabnotCell
-
- ROW_COLUMN - Static variable in class nxopen.uistyler.Dialog.ItemType
-
- ROW_COLUMN - Static variable in class nxopen.uistyler.StylerItem.ItemType
-
Row Column item
- ROW_MORE_STRINGS - Static variable in class nxopen.uf.UFConstants
-
- RowBuilder - Interface in nxopen.diagramming.tables
-
Represents a RowBuilder.
- RowColumn - Interface in nxopen.uistyler
-
Represents a RowColumn for UI Styler .
- rowCount() - Method in interface nxopen.features.shipdesign.DrawingSheetBuilder
-
Returns the number of rows into which the views should be arranged on the drawing sheet.
- rowCount() - Method in interface nxopen.ITableEditorDataProvider
-
Returns the number of rows in the table
License requirements: None.
- rowDataList() - Method in interface nxopen.linedesigner.ColumnGridEquipmentBuilder
-
Returns the row data list
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- rowDeepNumber() - Method in interface nxopen.linedesigner.ColumnGridEquipmentBuilder
-
Returns the number of rows of columns in column grid
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- rowHeight() - Method in interface nxopen.annotations.TableSectionBuilder
-
Returns the row height
License requirements: None.
- rowNumber() - Method in interface nxopen.tooling.ReusePositioningObjectBuilder
-
Returns the row number of pattern
License requirements: None.
- rowSpacingDouble() - Method in interface nxopen.linedesigner.ColumnGridEquipmentBuilder
-
Returns the value of row spacing between columns
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- rp1Left() - Method in interface nxopen.features.vehicledesign.HeadImpactRPillarDetailBuilder
-
Returns the left RP1 alternative point.
- rp1LeftFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactRPillarDetailBuilder
-
Returns the left RP1 alternative point flag.
- rp1Ratio() - Method in interface nxopen.features.vehicledesign.HeadImpactRPillarDetailBuilder
-
Returns the expression containing the value for the ratio used to position RP1.
- rp1Right() - Method in interface nxopen.features.vehicledesign.HeadImpactRPillarDetailBuilder
-
Returns the right RP1 alternative point.
- rp1RightFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactRPillarDetailBuilder
-
Returns the right RP1 alternative point flag.
- rp2Left() - Method in interface nxopen.features.vehicledesign.HeadImpactRPillarDetailBuilder
-
Returns the left RP2 alternative point.
- rp2Left() - Method in interface nxopen.features.vehicledesign.HeadImpactRPillarWizardBuilder
-
Returns the left rear pillar 2 point.
- rp2LeftFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactRPillarDetailBuilder
-
Returns the left RP2 alternative point flag.
- rp2Offset() - Method in interface nxopen.features.vehicledesign.HeadImpactRPillarDetailBuilder
-
Returns the expression containing the value for the offset used to position RP2.
- rp2Right() - Method in interface nxopen.features.vehicledesign.HeadImpactRPillarDetailBuilder
-
Returns the right RP2 alternative point.
- rp2Right() - Method in interface nxopen.features.vehicledesign.HeadImpactRPillarWizardBuilder
-
Returns the right rear pillar 2 point.
- rp2RightFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactRPillarDetailBuilder
-
Returns the right RP2 alternative point flag.
- rpillarFeature() - Method in interface nxopen.features.vehicledesign.HeadImpactBuilder
-
Returns the rear pillar feature for this head impact study.
- rpillarLeft() - Method in interface nxopen.features.vehicledesign.HeadImpactRPillarWizardBuilder
-
Returns the left rear pillar geometry.
- rpillarRight() - Method in interface nxopen.features.vehicledesign.HeadImpactRPillarWizardBuilder
-
Returns the right rear pillar geometry.
- RPINFINGER31 - Static variable in class nxopen.HumanData.JointType
-
Indicate joint named rpinfinger31
- RPINFINGER32 - Static variable in class nxopen.HumanData.JointType
-
Indicate joint named rpinfinger32
- RPM - Static variable in class nxopen.cae.ftk.DataManager.AfuRecordZValue
-
The z value is attribute of RPM field in an afu record
- RPM - Static variable in class nxopen.cae.XyFunctionMeasure
-
RPM unit
- RPM - Static variable in class nxopen.cam.CycleSpindle.Mode
-
spindle rpm
- RPM_RPM - Static variable in class nxopen.cae.XyFunctionUnit
-
RPM unit: rpm
- rpmValue() - Method in interface nxopen.cae.AfuZHeaderInfo
-
Returns the value of RPM field
License requirements: None.
- RPO - Interface in nxopen.features
-
Represents an RPO dimension
This is an abstract class, and cannot be instantiated
.
- RPOBuilder - Interface in nxopen.features
-
Represents a RPO builder.
- RPOBuilder.AssociativityType - Class in nxopen.features
-
Represents the associativity type for a dimension entity
- RPOBuilder.ReferenceDirectionData - Class in nxopen.features
-
- RPODimension - Interface in nxopen.features
-
Represents a RPO Dimension.
- RPS - Static variable in class nxopen.cam.InspectionAlignmentAssistantBuilder.AlignType
-
RPS alignment type
- RPS - Static variable in class nxopen.cam.InspectionAlignmentBuilder.AlignTypes
-
RPS alignment type
- rpsavailSelect() - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
Returns the RPS available select
License requirements: None.
- rpsxselection() - Method in interface nxopen.cam.InspectionAlignmentAssistantBuilder
-
Returns the RPS X selection
License requirements: None.
- rpsyselection() - Method in interface nxopen.cam.InspectionAlignmentAssistantBuilder
-
Returns the RPS Y selection
License requirements: None.
- rpszselection() - Method in interface nxopen.cam.InspectionAlignmentAssistantBuilder
-
Returns the RPS Z selection
License requirements: None.
- rr2 - Variable in class nxopen.uf.UFDrf.AskDispParmsData
-
- rr2 - Variable in class nxopen.uf.UFView.ReadViewDrawingParametersData
-
- rr3 - Variable in class nxopen.uf.UFView.ReadViewDrawingParametersData
-
- rrelief - Variable in class nxopen.uf.UFModl.InsetFlangeData
-
- rreliefType - Variable in class nxopen.uf.UFModl.InsetFlangeData
-
- RRINGFINGER21 - Static variable in class nxopen.HumanData.JointType
-
Indicate joint named rringfinger21
- RRINGFINGER22 - Static variable in class nxopen.HumanData.JointType
-
Indicate joint named rringfinger22
- RS2 - Static variable in class nxopen.cae.Result.Filetype
-
- RSDisplayObject - Interface in nxopen.cae.responsesimulation
-
Represents a BC display attributes
.
- rset - Variable in class nxopen.uf.UFLib.ExecuteQueryData
-
- RSEvent - Interface in nxopen.cae.responsesimulation
-
Represents a response analysis event
To create or edit an instance of this class, use
RSEventBuilder
Created in NX5.0.0
- RSEvent.AnalysisType - Class in nxopen.cae.responsesimulation
-
the analysis type of response analysis event.
- RSEvent.DdamFormulationType - Class in nxopen.cae.responsesimulation
-
Represents the fromulation type.
- RSEvent.DurationOption - Class in nxopen.cae.responsesimulation
-
the duration option
- RSEvent.ResultFileType - Class in nxopen.cae.responsesimulation
-
the result file type of event.
- RSEvent.SpacingType - Class in nxopen.cae.responsesimulation
-
the spacing type.
- RSEvent.Type - Class in nxopen.cae.responsesimulation
-
the type of reponse analysis event
- RSEventAttributes - Interface in nxopen.cae.responsesimulation
-
Represents all possible attributes setting for response analysis event .
- RSEventBuilder - Interface in nxopen.cae.responsesimulation
-
Represents the manager of CAE.ResponseSimulation.RSEvent.
- RSEventCollection - Interface in nxopen.cae.responsesimulation
-
Represents a collection of response analysis event
To obtain an instance of this class, refer to
Manager
Created in NX5.0.0
- RSEventOutputSetting - Interface in nxopen.cae.responsesimulation
-
Reprensents the output setting for an event .
- RSEventSolverParameters - Interface in nxopen.cae.responsesimulation
-
Represents a response analysis event .
- RSEventSolverParameters.DdamCoefficientType - Class in nxopen.cae.responsesimulation
-
Represents DDAM coefficient type
- RSM1000 - Static variable in class nxopen.motion.RoadBuilder.SurfaceDatatypeChoices
-
RSM1000
- RSM1002 - Static variable in class nxopen.motion.RoadBuilder.SurfaceDatatypeChoices
-
RSM1002
- RSM2000 - Static variable in class nxopen.motion.RoadBuilder.SurfaceDatatypeChoices
-
RSM2000
- RSM3000 - Static variable in class nxopen.motion.RoadBuilder.SurfaceDatatypeChoices
-
RSM3000
- RSO_NUM_SURF_CTRL_OPTIONS - Static variable in class nxopen.uf.UFModl.RsoSurfCtrlOption
-
- RSO_NUM_SURF_METHOD_OPTIONS - Static variable in class nxopen.uf.UFModl.RsoSurfMethod
-
- RSO_NUM_TRIM_OPTS - Static variable in class nxopen.uf.UFModl.RsoTrimOption
-
- RSO_SURF_CTRL_BY_SYSTEM - Static variable in class nxopen.uf.UFModl.RsoSurfCtrlOption
-
- RSO_SURF_CTRL_BY_USER - Static variable in class nxopen.uf.UFModl.RsoSurfCtrlOption
-
- RSO_SURF_METHOD_CLOUD - Static variable in class nxopen.uf.UFModl.RsoSurfMethod
-
- RSO_SURF_METHOD_ROUGH_FIT - Static variable in class nxopen.uf.UFModl.RsoSurfMethod
-
- RSO_SURF_METHOD_THRU - Static variable in class nxopen.uf.UFModl.RsoSurfMethod
-
- RSO_TRIM_OPT_BND_CURVE - Static variable in class nxopen.uf.UFModl.RsoTrimOption
-
- RSO_TRIM_OPT_NO - Static variable in class nxopen.uf.UFModl.RsoTrimOption
-
- RSO_TRIM_OPT_YES - Static variable in class nxopen.uf.UFModl.RsoTrimOption
-
- rtaper - Variable in class nxopen.uf.UFModl.FlangeData
-
- rtaperType - Variable in class nxopen.uf.UFModl.FlangeData
-
- rtc - Variable in class nxopen.uf.UFDrf.CreateXhatchData
-
- rtc - Variable in class nxopen.uf.UFDrf.GetXhatchParmsData
-
- RTD_OBSOLETE - Static variable in class nxopen.cam.CAMObject.Attr
-
- RTHUMB0 - Static variable in class nxopen.HumanData.JointType
-
Indicate joint named rthumb0
- RTHUMB1 - Static variable in class nxopen.HumanData.JointType
-
Indicate joint named rthumb1
- RTHUMB2 - Static variable in class nxopen.HumanData.JointType
-
Indicate joint named rthumb2
- RTJ - Static variable in class nxopen.cam.GrooveToolBuilder.InsertShapes
-
Ring type joint groove tool
- RTM - Static variable in class nxopen.ame.PlcDataType
-
- RUBBER - Static variable in class nxopen.Edge.EdgeType
-
Rubber edge, no curve attached
- RUBBER - Static variable in class nxopen.Face.FaceType
-
Rubber face, no surface attached
- rule() - Method in interface nxopen.annotations.MasterSymbolListItemBuilder
-
Returns the note rule
License requirements: None.
- RULE - Static variable in class nxopen.annotations.MasterSymbolListItemBuilder.TextTypes
-
- RULE - Static variable in class nxopen.cam.HoleMakingBuilder.ModelDepthTypes
-
rule
- RULE - Static variable in class nxopen.cam.OperationBuilder.HoleAxisTypes
-
Rule
- RULE - Static variable in class nxopen.cam.OperationBuilder.HoleDepthTypes
-
Depth/Rule
- rule() - Method in interface nxopen.drafting.SpecifyRuleBuilder
-
Returns the rule
License requirements: None.
- rule - Variable in class nxopen.RuleManager.ParameterRule
-
new rule text for this parameter
- Rule - Interface in nxopen.visualreporting
-
- RULE_BASED - Static variable in class nxopen.cam.FeatureProcessBuilder.FeatureProcessType
-
Rule based operation creation
- RULE_EVALUATION_RESULT_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
-
Rule Evaluation for results in part
- RULE_IF_NO_VECTOR - Static variable in class nxopen.cam.OperationBuilder.HoleAxisTypes
-
Rule if no vector
- RULE_TEXT - Static variable in class nxopen.uf.UFDrf.CustomSymbolTextType
-
- ruleCreationType() - Method in interface nxopen.ame.CallMethodRuleBuilder
-
Returns the creation type by creating a position
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- RULED - Static variable in class nxopen.features.EmbossSidewall.SidewallMethod
-
Indicates method to create sidewalls that are ruled along the normals of the faces in the supplied profile.
- Ruled - Interface in nxopen.features
-
Represents a ruled feature.
- RULED - Static variable in class nxopen.MeshParameterData.FeatureType
-
- RULED_INQUIRE_ERROR - Static variable in class nxopen.uf.UFConstants
-
- RULED_MAX_STRING_2 - Static variable in class nxopen.uf.UFConstants
-
- RULED_MIN_STRING_2 - Static variable in class nxopen.uf.UFConstants
-
- RULED_RAMP - Static variable in class nxopen.features.StepBuilder.StepFaceMethods
-
Replaces the step face with a ruled ramp face
- RULED_RAMP - Static variable in class nxopen.features.StepBuilder.StepWallMethods
-
Replaces the step-wall face with a ruled ramp face
- RuledBuilder - Interface in nxopen.features
-
- ruleFeatures() - Method in interface nxopen.features.shipdesign.SmartRuleBuilder
-
Returns the features as smart rule inputs
License requirements: None.
- ruleManager() - Method in interface nxopen.BasePart
-
Returns the rule manager for this part .
- RuleManager - Interface in nxopen
-
Provides methods for manipulating the Knowledge Fusion rules in a part.
- RuleManager.AdoptableTypes - Class in nxopen
-
Used to return adoptable object types.
- RuleManager.DebugInstance - Class in nxopen
-
Used to return debug update information for instances.
- RuleManager.DebugInstancesData - Class in nxopen
-
- RuleManager.DebugRule - Class in nxopen
-
Used to return debug update information for rules.
- RuleManager.Filter - Class in nxopen
-
The filter option for asking for classes.
- RuleManager.FunctionArgumentsInformation - Class in nxopen
-
Used to return information about the arguments for a function.
- RuleManager.FunctionInformation - Class in nxopen
-
Used to return information about a function.
- RuleManager.InitializationStatusType - Class in nxopen
-
Indicates the status from initializing RuleManager.
- RuleManager.InitializeData - Class in nxopen
-
- RuleManager.LicenseType - Class in nxopen
-
Indicates the license type to be used.
- RuleManager.ParameterRule - Class in nxopen
-
Used to specify parameter values for child rule creation or modification.
- RuleManager.RuleType - Class in nxopen
-
Indicates the data type of a rule.
- ruleMatchOptions() - Method in interface nxopen.cam.FeatureTeaching
-
Returns the rule options
License requirements: fbm_author ("FBM Author")
.
- ruleName() - Method in interface nxopen.ame.CallMethodRuleBuilder
-
Returns the rule name
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- ruleName() - Method in interface nxopen.ame.OperandRuleBuilder
-
Returns the rule name
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- ruleName() - Method in interface nxopen.ame.OperatorRuleBuilder
-
Returns the rule name
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- RulePreferences - Interface in nxopen.preferences
-
Provides methods for manipulating the Knowledge Fusion preferences in a session.
- RULER - Static variable in class nxopen.uf.UFDisp.PolyMarker
-
- RULER - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- rules - Variable in class nxopen.RuleManager.DebugInstancesData
-
Array of rules
- rules - Variable in class nxopen.uf.UFFam.AttributeData
-
- rules - Variable in class nxopen.uf.UFKf.AskRulesData
-
- rules - Variable in class nxopen.uf.UFKf.AskRulesOfClassData
-
- rules0 - Variable in class nxopen.RuleManager.DebugInstance
-
index of rules[0]
- RulesBuilder - Interface in nxopen.drafting
-
This class is used to specify knowledge fusion rules in a drawing template.
- rulingType() - Method in interface nxopen.cam.ToolAxisVariable
-
Returns the Ruling Type
License requirements: None.
- run() - Method in interface nxopen.linedesigner.StairwayEquipmentBuilder
-
Returns the run
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- Run - Interface in nxopen.plas
-
Represents the Run class.
- Run - Interface in nxopen.routing
-
Routing Run object references components and stocks which comprise a piping run.
- run() - Method in class nxopen.RuntimeShutdownThread
-
- RUN - Static variable in class nxopen.sim.IsvControlPanelBuilder.VncMode
-
RUN
- run - Variable in class nxopen.uf.UFModl.SmjoggleData
-
- Run.CompareStatus - Class in nxopen.routing
-
Represents discrepancies in the run compared to another run
- Run.FlipStatus - Class in nxopen.routing
-
Represents result of flip component
- Run.Status - Class in nxopen.routing
-
Represents the status of a run
- RUN_ELEMENT - Static variable in class nxopen.assemblies.FindInCollaborativeDesign.ObjectType
-
Search for Run Elements
- RUN_FLOW_NOT_DEFINED - Static variable in class nxopen.routing.Run.FlipStatus
-
Flow is not defined on Run.
- RUN_PRE_DELETE - Static variable in class nxopen.routing.CustomManager.CallbackReason
-
Called before deleting a run.
- RUN_PROCESS_ASSISTANT - Static variable in class nxopen.uf.UFCamPref.CamPref
-
- RUN_VALIDATION - Static variable in class nxopen.pdm.PartOperationImportBuilder.Validation
-
- RUN_VALIDATION - Static variable in class nxopen.uf.UFClone.ValidationMode
-
- RUN_VALIDATION_HYBRID - Static variable in class nxopen.pdm.PartOperationImportBuilder.Validation
-
- RUN_VALIDATION_HYBRID - Static variable in class nxopen.uf.UFClone.ValidationMode
-
- runAttributes() - Method in interface nxopen.routing.IntegrateRunsBuilder
-
Returns the run attributes
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- runAutoDimension() - Method in interface nxopen.Sketch
-
Run auto dimensioning.
- RunBuilder - Interface in nxopen.plas
-
Represents a RunBuilder.
- runClearanceAnalysis() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
Returns the option to specify whether or not the clearance analysis will be performed.
- RunCollection - Interface in nxopen.routing
-
Represents a collection of
Run
objects.
- RunContentProximitySearchTerm - Interface in nxopen.assemblies
-
- RunContentProximitySearchTermBuilder - Interface in nxopen.assemblies
-
- runCSE() - Method in interface nxopen.mechatronics.RuntimeNCBuilder
-
This method is used to run NC Code via CSE in order to get output events
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- RunCSEData() - Constructor for class nxopen.mechatronics.RuntimeNCBuilder.RunCSEData
-
- runDesignStudy() - Method in interface nxopen.optimization.DesignStudyBuilder
-
Run design study process
License requirements: None.
- runId - Variable in class nxopen.uf.UFRouteRun.AskRunIdAndTypeData
-
- runIdentifier() - Method in interface nxopen.routing.DefineRunBuilder
-
Returns the run identifier
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- runInParallel() - Method in interface nxopen.motion.TirePropertyFtBuilder
-
Returns the "run in parallel" parameter.
- RunItem - Interface in nxopen.routing
-
Routing Run Item object references components which comprise a piping run.
- RunItem.Type - Class in nxopen.routing
-
Represents the type of Run Item
- runItems() - Method in interface nxopen.routing.RunItemsBuilder
-
Returns the list item of run From/To item
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- RunItemsBuilder - Interface in nxopen.routing
-
- RunItemsBuilderList - Interface in nxopen.routing
-
Represents a list of objects.
- runMotionArticulation() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
Run the motion articulation, output the motion file and then exit the motion simulation.
- runName() - Method in interface nxopen.routing.IntegrateRunsBuilder
-
Returns the user mentioned run name for Integrated Run
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- runName() - Method in interface nxopen.routing.SplitRunBuilder
-
Returns the user mentioned run name after split
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- Runner - Interface in nxopen.tooling
-
Represents a runner feature
To create or edit an instance of this class, use
RunnerBuilder
Created in NX11.0.0
- runner() - Method in interface nxopen.tooling.ToolingManager
-
Returns the RunnerCollection instance belonging to this part .
- runnerBodies() - Method in interface nxopen.tooling.RunnerBuilder
-
Returns the runner bodies
License requirements: None.
- RunnerBuilder - Interface in nxopen.tooling
-
Mold Wizard runner management builder, select curves as runner guide, choose section type and edit
section parameters, optional choose boolean type to create runner channel.
- RunnerBuilder.GuideEndType - Class in nxopen.tooling
-
Represents the runner guide end type.
- RunnerBuilder.SectionType - Class in nxopen.tooling
-
Represents the section type of runner channel.
- RunnerCollection - Interface in nxopen.tooling
-
Represents a collection of Runner
To obtain an instance of this class, refer to
ToolingManager
Created in NX7.5.0
- runNumber() - Method in interface nxopen.cam.InspectionMeasDataBuilder
-
Returns the run number
License requirements: None.
- runObject() - Method in interface nxopen.routing.SplitRunBuilder
-
Returns the user selected Run for Split
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- runoffDepth() - Method in interface nxopen.die.KeywayBuilder
-
Returns the expression for the runoff depth
License requirements: None.
- runoffDepth() - Method in interface nxopen.die.KeywayChildBuilder
-
Returns the runoff depth of the keyway.
- runoffDepth() - Method in interface nxopen.die.KeywayParentBuilder
-
Returns the runoff depth of keyways.
- runoffDiameter() - Method in interface nxopen.die.KeywayChildBuilder
-
Returns the runoff diameter of the keyway.
- runoffDiameter() - Method in interface nxopen.die.KeywayParentBuilder
-
Returns the runoff diameter of keyways.
- runoffLength() - Method in interface nxopen.die.KeywayBuilder
-
Returns the expression for the runoff length
License requirements: None.
- runoffLength() - Method in interface nxopen.die.KeywayChildBuilder
-
Returns the runoff length of the keyway.
- runoffLength() - Method in interface nxopen.die.KeywayParentBuilder
-
Returns the runoff length of keyways.
- runoffRadius() - Method in interface nxopen.die.KeywayBuilder
-
Returns the expression for the runoff radius
License requirements: None.
- runoffType() - Method in interface nxopen.die.KeywayChildBuilder
-
Returns the runoff type of the keyway.
- runoffType() - Method in interface nxopen.die.KeywayParentBuilder
-
Returns the runoff type of keyways.
- runoffWidth() - Method in interface nxopen.die.KeywayBuilder
-
Returns the expression for the runoff width
License requirements: None.
- runoffWidth() - Method in interface nxopen.die.KeywayChildBuilder
-
Returns the runoff width of the keyway.
- runoffWidth() - Method in interface nxopen.die.KeywayParentBuilder
-
Returns the runoff width of keyways.
- runOptimization() - Method in interface nxopen.optimization.OptimizationBuilder
-
Run optimization process
License requirements: None.
- runout() - Method in interface nxopen.features.sheetmetal.JoggleSideOptionsBuilder
-
Returns the runout
License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- runProcessAssistant() - Method in interface nxopen.cam.Preferences
-
Returns the process assistant
License requirements: None.
- runs() - Method in interface nxopen.routing.RouteManager
-
Run Collection .
- runs - Variable in class nxopen.uf.UFRouteRun.AskRunsInPartData
-
- runSegmentGetFlowDirection(ISegment) - Method in interface nxopen.routing.Run
-
Get flow direction of a run segment
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- runSegmentReverseFlowDirection(ISegment) - Method in interface nxopen.routing.Run
-
Reverse flow direction of a run segment
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- runSegmentSetFlowDirection(ISegment, int) - Method in interface nxopen.routing.Run
-
Set flow direction of a run segment
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- RunSimulationBuilder - Interface in nxopen.tooling
-
- RunSimulationBuilder.CollisionCheckOptions - Class in nxopen.tooling
-
Specifies the collision check method
- runSmartRule(StandardPartItemBuilder, StandardPartFrameworkBuilder.SmartRuleStage) - Method in interface nxopen.features.shipdesign.StandardPartFrameworkBuilder
-
Runs the smart rule engine to get the inference result.
- RunSmartRuleData() - Constructor for class nxopen.features.shipdesign.StandardPartFrameworkBuilder.RunSmartRuleData
-
- RUNSOLVER - Static variable in class nxopen.tooling.LsdynaKfileGeneratorBuilder.OperTypes
-
Runs LS-DYNA solver
- runTest() - Method in interface nxopen.cae.optimization.TBSTestFunction
-
Returns the option whether to run test solving
License requirements: None.
- runTime - Variable in class nxopen.assemblies.ClearanceSet.Summary
-
the total analysis time (in secs.)
- RUNTIME - Static variable in class nxopen.cae.optimization.TBSSmoothBuilder.SelfIntersectionCheckingOption
-
Check always
- runTime - Variable in class nxopen.uf.UFClear.Summary
-
- RUNTIME_PARAMETERS - Static variable in class nxopen.mechatronics.ProxyObjectBuilder.Type
-
Runtime Parameters
- RuntimeBehavior - Interface in nxopen.mechatronics
-
Represents the Runtime Behavior class.
- RuntimeBehaviorBuilder - Interface in nxopen.mechatronics
-
- RuntimeBehaviorCollection - Interface in nxopen.mechatronics
-
Represents a collection of Runtime Behavior.
- runtimeBehaviors() - Method in interface nxopen.mechatronics.PhysicsManager
-
- RuntimeFormula - Interface in nxopen.mechatronics
-
Represents the Runtime Formula class.
- RuntimeFormulaBuilder - Interface in nxopen.mechatronics
-
- RuntimeFormulaCollection - Interface in nxopen.mechatronics
-
Represents a collection of RuntimeFormula.
- RuntimeFormulaParameter - Interface in nxopen.mechatronics
-
Represents the Runtime Formula Parameter class.
- RuntimeFormulaParameterBuilder - Interface in nxopen.mechatronics
-
- RuntimeFormulaParameterBuilderList - Interface in nxopen.mechatronics
-
Represents a list of objects.
- runtimeFormulas() - Method in interface nxopen.mechatronics.PhysicsManager
-
- RuntimeNCBuilder - Interface in nxopen.mechatronics
-
- RuntimeNCBuilder.AxesAndMachineEventsData - Class in nxopen.mechatronics
-
- RuntimeNCBuilder.RunCSEData - Class in nxopen.mechatronics
-
- RuntimeNCCollection - Interface in nxopen.mechatronics
-
Represents a collection of Runtime NC.
- RuntimeNCObject - Interface in nxopen.mechatronics
-
Represents the RuntimeNCObject class.
- runtimeNCs() - Method in interface nxopen.mechatronics.PhysicsManager
-
- runtimePropertyTag() - Method in interface nxopen.mechatronics.RuntimeFormulaParameterBuilder
-
Returns the RuntimePropertyIndex
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- RuntimeShutdownThread - Class in nxopen
-
- RuntimeShutdownThread(BaseSession_impl) - Constructor for class nxopen.RuntimeShutdownThread
-
- runToSimTime() - Method in interface nxopen.sim.LoadSnapshotBuilder
-
Returns the run to simulation time
License requirements: None.
- runType() - Method in interface nxopen.routing.DefineRunBuilder
-
Returns the run type
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- runType - Variable in class nxopen.uf.UFRouteRun.AskRunIdAndTypeData
-
- rvalue() - Method in interface nxopen.features.sheetmetal.MetaformBuilder
-
Returns the r value
License requirements: None.
- rvalue() - Method in interface nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder
-
Returns the R-value
License requirements: None.
- rValue - Variable in class nxopen.uf.UFModl.GflangeOptionsData
-
- RW - Static variable in class nxopen.mechatronics.ExternalConnectionElementBuilder.StreamType
-
read and write
- RX - Static variable in class nxopen.cae.CaeElementAssociatedDataUtilsComponentEnd
-
RX rotational
- RX - Static variable in class nxopen.cae.connections.Dof
-
X Rotation degree of freedom
- RX - Static variable in class nxopen.cae.DamperEADBuilder.RotationalComponentEnd
-
RX rotational
- RX - Static variable in class nxopen.cae.FrfSet.NodeComponent
-
rx component
- RX - Static variable in class nxopen.cae.responsesimulation.DirectionDataComponent
-
- RX - Static variable in class nxopen.cae.responsesimulation.Excitation.Component
-
- RX - Static variable in class nxopen.cae.SpringEADBuilder.RotationalComponentEnd
-
RX rotational
- rx() - Method in interface nxopen.cam.InspectionAnalyzeBuilder
-
Returns the DOF setting in the X Rotation direction
License requirements: None.
- RX - Static variable in class nxopen.motion.ControlInputPortBuilder.MeasuredComponent
-
RX
- RX - Static variable in class nxopen.motion.MotionSensorBuilder.Component
-
rx component
- RXELEMENT_FORCE - Static variable in class nxopen.cae.Result.Quantity
-
- rxLower() - Method in interface nxopen.cam.InspectionAnalyzeBuilder
-
Returns the rotation in X DOF lower limit
License requirements: None.
- rxMass() - Method in interface nxopen.motion.NormalModeProperty
-
Returns the percent mass of Rx direction component
License requirements: mechanisms ("MECHANISMS")
.
- rxStiffnessConstant() - Method in interface nxopen.cae.connections.IStiffness
-
Returns the RX stiffness constant
License requirements: None.
- rxStiffnessDynamic() - Method in interface nxopen.cae.connections.IStiffnessDynamic
-
Returns the RX stiffness dynamic
License requirements: None.
- rxStructuralDampingConstant() - Method in interface nxopen.cae.connections.IStructuralDamping
-
Returns the RX structural damping constant
License requirements: None.
- rxStructuralDampingDynamic() - Method in interface nxopen.cae.connections.IStructuralDampingDynamic
-
Returns the RX structural damping dynamic
License requirements: None.
- rxUpper() - Method in interface nxopen.cam.InspectionAnalyzeBuilder
-
Returns the rotation in X DOF upper limit
License requirements: None.
- rxViscousDampingConstant() - Method in interface nxopen.cae.connections.IViscousDamping
-
Returns the RX viscous damping constant
License requirements: None.
- rxViscousDampingDynamic() - Method in interface nxopen.cae.connections.IViscousDampingDynamic
-
Returns the RX viscous damping dynamic
License requirements: None.
- RY - Static variable in class nxopen.cae.CaeElementAssociatedDataUtilsComponentEnd
-
RY rotational
- RY - Static variable in class nxopen.cae.connections.Dof
-
Y Rotation degree of freedom
- RY - Static variable in class nxopen.cae.DamperEADBuilder.RotationalComponentEnd
-
RY rotational
- RY - Static variable in class nxopen.cae.FrfSet.NodeComponent
-
ry component
- RY - Static variable in class nxopen.cae.responsesimulation.DirectionDataComponent
-
- RY - Static variable in class nxopen.cae.responsesimulation.Excitation.Component
-
- RY - Static variable in class nxopen.cae.SpringEADBuilder.RotationalComponentEnd
-
RY rotational
- ry() - Method in interface nxopen.cam.InspectionAnalyzeBuilder
-
Returns the DOF setting in the Y Rotation direction
License requirements: None.
- RY - Static variable in class nxopen.motion.ControlInputPortBuilder.MeasuredComponent
-
RY
- RY - Static variable in class nxopen.motion.MotionSensorBuilder.Component
-
ry component
- RYELEMENT_FORCE - Static variable in class nxopen.cae.Result.Quantity
-
- ryLower() - Method in interface nxopen.cam.InspectionAnalyzeBuilder
-
Returns the rotation in Y DOF lower limit
License requirements: None.
- ryMass() - Method in interface nxopen.motion.NormalModeProperty
-
Returns the percent mass of Ry direction component
License requirements: mechanisms ("MECHANISMS")
.
- ryStiffnessConstant() - Method in interface nxopen.cae.connections.IStiffness
-
Returns the RY stiffness constant
License requirements: None.
- ryStiffnessDynamic() - Method in interface nxopen.cae.connections.IStiffnessDynamic
-
Returns the RY stiffness dynamic
License requirements: None.
- ryStructuralDampingConstant() - Method in interface nxopen.cae.connections.IStructuralDamping
-
Returns the RY structural damping constant
License requirements: None.
- ryStructuralDampingDynamic() - Method in interface nxopen.cae.connections.IStructuralDampingDynamic
-
Returns the RY structural damping dynamic
License requirements: None.
- ryUpper() - Method in interface nxopen.cam.InspectionAnalyzeBuilder
-
Returns the rotation in Y DOF upper limit
License requirements: None.
- ryViscousDampingConstant() - Method in interface nxopen.cae.connections.IViscousDamping
-
Returns the RY viscous damping constant
License requirements: None.
- ryViscousDampingDynamic() - Method in interface nxopen.cae.connections.IViscousDampingDynamic
-
Returns the RY viscous damping dynamic
License requirements: None.
- RZ - Static variable in class nxopen.cae.CaeElementAssociatedDataUtilsComponentEnd
-
RZ rotational
- RZ - Static variable in class nxopen.cae.connections.Dof
-
Z Rotation degree of freedom
- RZ - Static variable in class nxopen.cae.DamperEADBuilder.RotationalComponentEnd
-
RZ rotational
- RZ - Static variable in class nxopen.cae.FrfSet.NodeComponent
-
rz component
- RZ - Static variable in class nxopen.cae.responsesimulation.DirectionDataComponent
-
- RZ - Static variable in class nxopen.cae.responsesimulation.Excitation.Component
-
- RZ - Static variable in class nxopen.cae.SpringEADBuilder.RotationalComponentEnd
-
RZ rotational
- rz() - Method in interface nxopen.cam.InspectionAnalyzeBuilder
-
Returns the DOF setting in the Z Rotation direction
License requirements: None.
- RZ - Static variable in class nxopen.motion.ControlInputPortBuilder.MeasuredComponent
-
RZ
- RZ - Static variable in class nxopen.motion.MotionSensorBuilder.Component
-
rz component
- RZELEMENT_FORCE - Static variable in class nxopen.cae.Result.Quantity
-
- rzLower() - Method in interface nxopen.cam.InspectionAnalyzeBuilder
-
Returns the rotation in Z DOF lower limit
License requirements: None.
- rzMass() - Method in interface nxopen.motion.NormalModeProperty
-
Returns the percent mass of Rz direction component
License requirements: mechanisms ("MECHANISMS")
.
- rzStiffnessConstant() - Method in interface nxopen.cae.connections.IStiffness
-
Returns the RZ stiffness constant
License requirements: None.
- rzStiffnessDynamic() - Method in interface nxopen.cae.connections.IStiffnessDynamic
-
Returns the RZ stiffness dynamic
License requirements: None.
- rzStructuralDampingConstant() - Method in interface nxopen.cae.connections.IStructuralDamping
-
Returns the RZ structural damping constant
License requirements: None.
- rzStructuralDampingDynamic() - Method in interface nxopen.cae.connections.IStructuralDampingDynamic
-
Returns the RZ structural damping dynamic
License requirements: None.
- rzUpper() - Method in interface nxopen.cam.InspectionAnalyzeBuilder
-
Returns the rotation in Z DOF upper limit
License requirements: None.
- rzViscousDampingConstant() - Method in interface nxopen.cae.connections.IViscousDamping
-
Returns the RZ viscous damping constant
License requirements: None.
- rzViscousDampingDynamic() - Method in interface nxopen.cae.connections.IViscousDampingDynamic
-
Returns the RZ viscous damping dynamic
License requirements: None.