public interface WeldFillStripBuilder extends Builder
WeldFillBuilder
. WeldFillBuilder.newFillStrip(nxopen.Point3d, double)
Modifier and Type | Method and Description |
---|---|
void |
alignNegative(WeldFillStripBuilder alignStrip)
Aligns the end of the fill strip, opposite of the length direction from center, to the
same end of the input fill strip.
|
void |
alignPositive(WeldFillStripBuilder alignStrip)
Aligns the end of the fill strip, along the length direction from center, to the
same end of the input fill strip.
|
Point3d |
center()
Returns the center of the fill strip.
|
void |
joinNegative(WeldFillStripBuilder joinStrip)
Joins the end of the fill strip, opposite of the length direction from center, to the
other fill strip input.
|
void |
joinPositive(WeldFillStripBuilder joinStrip)
Joins the end of the fill strip, along the length direction from center, to the
other fill strip input.
|
double |
length()
Returns the length of the fill strip.
|
void |
moveDelta(double lengthDelta,
double widthDelta)
Moves the fill strip the input length and width values.
|
void |
moveToPoint(Point3d newCenter)
Moves the fill strip to the input center.
|
void |
setLength(double length)
License requirements: None. |
void |
setToBeDeleted(boolean flag)
License requirements: None. |
WeldFillStripBuilder |
split()
Splits the fill strip at the center and creates a new strip.
|
void |
stretchNegative(double lengthDelta)
Stretches the fill strip the input length opposite of the length direction.
|
void |
stretchPositive(double lengthDelta)
Stretches the fill strip the input length in the length direction.
|
boolean |
toBeDeleted()
Returns the flag indicating that the strip should be deleted.
|
commit, destroy, getCommittedObjects, getObject, showResults
printTestData, printTestData, tag, tagValue
validate
void moveToPoint(Point3d newCenter) throws NXException, RemoteException
newCenter
- New center of the fill stripNXException
RemoteException
void moveDelta(double lengthDelta, double widthDelta) throws NXException, RemoteException
lengthDelta
- Distance to move strip in the length direction.widthDelta
- Distance to move strip in the width direction.NXException
RemoteException
WeldFillStripBuilder split() throws NXException, RemoteException
NXException
RemoteException
void stretchPositive(double lengthDelta) throws NXException, RemoteException
lengthDelta
- Distance to stretch the strip in the length direction.NXException
RemoteException
void stretchNegative(double lengthDelta) throws NXException, RemoteException
lengthDelta
- Distance to stretch the strip opposite of the length direction.NXException
RemoteException
void alignPositive(WeldFillStripBuilder alignStrip) throws NXException, RemoteException
alignStrip
- Fill strip to align to.NXException
RemoteException
void alignNegative(WeldFillStripBuilder alignStrip) throws NXException, RemoteException
alignStrip
- Fill strip to align to.NXException
RemoteException
Point3d center() throws NXException, RemoteException
NXException
RemoteException
double length() throws NXException, RemoteException
NXException
RemoteException
void setLength(double length) throws NXException, RemoteException
length
- NXException
RemoteException
boolean toBeDeleted() throws NXException, RemoteException
NXException
RemoteException
void setToBeDeleted(boolean flag) throws NXException, RemoteException
flag
- NXException
RemoteException
void joinPositive(WeldFillStripBuilder joinStrip) throws NXException, RemoteException
joinStrip
- Fill strip to join with.NXException
RemoteException
void joinNegative(WeldFillStripBuilder joinStrip) throws NXException, RemoteException
joinStrip
- Fill strip to join with.NXException
RemoteException
Copyright 2017 Siemens Product Lifecycle Management Software Inc. All Rights Reserved.