nxopen.die

Interface HandlingCoreChildBuilder

All Superinterfaces:

Builder, FeatureBuilder, IComponentBuilder, Remote, TaggedObject

public interface HandlingCoreChildBuilder
extends FeatureBuilder

Represents a Die Handling Core Child sub feature.
This sub feature is created via the main feature builder.

Created in NX4.0.0

Method Summary

Modifier and Type	Method and Description
DieBuildStatusOption	buildStatus() Returns the build status of the handling core.
ILocation	center() Returns the center of the handling core.
double	clearance() Returns the clearance of the handling core.
ISurface	coreOrientation() Returns the core orientation of the handling core.
double	depth() Returns the depth of the handling core.
boolean	designStatus() Returns the design status of the handling core, if true the handling core will be built into the model, if false it will not.
boolean	displayStatus() Returns the display status of the handling core, if true input data to the handling core will be displayed, if false the input data will not be displayed.
double	height() Returns the height of the handling core.
boolean	reverseOrientation() Returns the value to reverse the orientation of the core plane, if true the handling core orientation normal will be reversed, if false it will not.
void	setCenter(ILocation center) Sets the center of the handling core.
void	setClearance(double clearance) Sets the clearance of the handling core.
void	setCoreOrientation(ISurface coreOrientation) Sets the core orientation of the handling core.
void	setDepth(double depth) Sets the depth of the handling core.
void	setDesignStatus(boolean designStatus) Sets the design status of the handling core, if true the handling core will be built into the model, if false it will not.
void	setDisplayStatus(boolean displayStatus) Sets the display status of the handling core, if true input data to the handling core will be displayed, if false the input data will not be displayed.
void	setHeight(double height) Sets the height of the handling core.
void	setReverseOrientation(boolean reverseOrientation) Sets the value to reverse the orientation of the core plane, if true the handling core orientation normal will be reversed, if false it will not.
void	setWidth(double width) Sets the width of the handling core.
void	translateCenter(Vector3d translateDist) Translates the center of the die handling core by the specified amount.
double	width() Returns the width of the handling core.

Methods inherited from interface nxopen.features.FeatureBuilder

commitFeature, getFeature, hideInternalParentFeatureAfterEdit, parentFeatureInternal, patchSolutionFlag, patchSurfaceFilename, setParentFeatureInternal, setParentFeatureInternal, setPatchSolutionFlag, setPatchSurfaceFilename, setSurroundingPatchSurfaceFilename, showInternalParentFeatureForEdit, surroundingPatchSurfaceFilename, unsetParentFeatureInternal

Methods inherited from interface nxopen.Builder

commit, destroy, getCommittedObjects, getObject, showResults

Methods inherited from interface nxopen.TaggedObject

printTestData, printTestData, tag, tagValue

Methods inherited from interface nxopen.geometricutilities.IComponentBuilder

validate

Method Detail

setCenter

void setCenter(ILocation center)
        throws NXException,
               RemoteException

Sets the center of the handling core.
License requirements: ug_die_design ("Die Design")

Created in NX4.0.0

Parameters:

center -

Throws:

NXException

RemoteException

center

ILocation center()
          throws NXException,
                 RemoteException

Returns the center of the handling core.
License requirements: ug_die_design ("Die Design")

Created in NX4.0.0

Throws:

NXException

RemoteException

setCoreOrientation

void setCoreOrientation(ISurface coreOrientation)
                 throws NXException,
                        RemoteException

Sets the core orientation of the handling core.
License requirements: ug_die_design ("Die Design")

Created in NX4.0.0

Parameters:

coreOrientation -

Throws:

NXException

RemoteException

coreOrientation

ISurface coreOrientation()
                  throws NXException,
                         RemoteException

Returns the core orientation of the handling core.
License requirements: ug_die_design ("Die Design")

Created in NX4.0.0

Throws:

NXException

RemoteException

setHeight

void setHeight(double height)
        throws NXException,
               RemoteException

Sets the height of the handling core.
License requirements: ug_die_design ("Die Design")

Created in NX4.0.0

Parameters:

height -

Throws:

NXException

RemoteException

height

double height()
       throws NXException,
              RemoteException

Returns the height of the handling core.
License requirements: ug_die_design ("Die Design")

Created in NX4.0.0

Throws:

NXException

RemoteException

setWidth

void setWidth(double width)
       throws NXException,
              RemoteException

Sets the width of the handling core.
License requirements: ug_die_design ("Die Design")

Created in NX4.0.0

Parameters:

width -

Throws:

NXException

RemoteException

width

double width()
      throws NXException,
             RemoteException

Returns the width of the handling core.
License requirements: ug_die_design ("Die Design")

Created in NX4.0.0

Throws:

NXException

RemoteException

setClearance

void setClearance(double clearance)
           throws NXException,
                  RemoteException

Sets the clearance of the handling core.
License requirements: ug_die_design ("Die Design")

Created in NX4.0.0

Parameters:

clearance -

Throws:

NXException

RemoteException

clearance

double clearance()
          throws NXException,
                 RemoteException

Returns the clearance of the handling core.
License requirements: ug_die_design ("Die Design")

Created in NX4.0.0

Throws:

NXException

RemoteException

setDepth

void setDepth(double depth)
       throws NXException,
              RemoteException

Sets the depth of the handling core.
License requirements: ug_die_design ("Die Design")

Created in NX4.0.0

Parameters:

depth -

Throws:

NXException

RemoteException

depth

double depth()
      throws NXException,
             RemoteException

Returns the depth of the handling core.
License requirements: ug_die_design ("Die Design")

Created in NX4.0.0

Throws:

NXException

RemoteException

setReverseOrientation

void setReverseOrientation(boolean reverseOrientation)
                    throws NXException,
                           RemoteException

Sets the value to reverse the orientation of the core plane, if true the handling core orientation normal will be reversed, if false it will not.
License requirements: ug_die_design ("Die Design")

Created in NX4.0.0

Parameters:

reverseOrientation -

Throws:

NXException

RemoteException

reverseOrientation

boolean reverseOrientation()
                    throws NXException,
                           RemoteException

Returns the value to reverse the orientation of the core plane, if true the handling core orientation normal will be reversed, if false it will not.
License requirements: ug_die_design ("Die Design")

Created in NX4.0.0

Throws:

NXException

RemoteException

setDesignStatus

void setDesignStatus(boolean designStatus)
              throws NXException,
                     RemoteException

Sets the design status of the handling core, if true the handling core will be built into the model, if false it will not.
License requirements: ug_die_design ("Die Design")

Created in NX4.0.0

Parameters:

designStatus -

Throws:

NXException

RemoteException

designStatus

boolean designStatus()
              throws NXException,
                     RemoteException

Returns the design status of the handling core, if true the handling core will be built into the model, if false it will not.
License requirements: ug_die_design ("Die Design")

Created in NX4.0.0

Throws:

NXException

RemoteException

buildStatus

DieBuildStatusOption buildStatus()
                          throws NXException,
                                 RemoteException

Returns the build status of the handling core.
License requirements: ug_die_design ("Die Design")

Created in NX4.0.0

Throws:

NXException

RemoteException

setDisplayStatus

void setDisplayStatus(boolean displayStatus)
               throws NXException,
                      RemoteException

Sets the display status of the handling core, if true input data to the handling core will be displayed, if false the input data will not be displayed.
License requirements: ug_die_design ("Die Design")

Created in NX4.0.0

Parameters:

displayStatus -

Throws:

NXException

RemoteException

displayStatus

boolean displayStatus()
               throws NXException,
                      RemoteException

Returns the display status of the handling core, if true input data to the handling core will be displayed, if false the input data will not be displayed.
License requirements: ug_die_design ("Die Design")

Created in NX4.0.0

Throws:

NXException

RemoteException

translateCenter

void translateCenter(Vector3d translateDist)
              throws NXException,
                     RemoteException

Translates the center of the die handling core by the specified amount.
License requirements: ug_die_design ("Die Design")

Created in NX5.0.0

Parameters:

translateDist - A scaled vector indicating the distance to translate

Throws:

NXException

RemoteException