- A - Static variable in class nxopen.ame.InterruptionPointBuilder.Variant
-
- A - Static variable in class nxopen.annotations.CuttingPlaneSymbolBuilder.ViewNameFormatOption
-
View Name is in the 'Section Prefix A' format, Where Section Prefix is taken from PMI Preferences
and A is the Text of the PMI Cutting Plane Symbol.
- A - Static variable in class nxopen.annotations.LineWeldDataBuilder.WeldSizeCodeType
-
- A - Static variable in class nxopen.annotations.SizeLetterCode
-
Specifies size letter code "a"
- a - Variable in class nxopen.cae.aerostructures.author.ABB.EquivalentSectionPropertiesData
-
Area of the equivalent section (sum of all sub-sections)
- A - Static variable in class nxopen.cae.FemSignalProcessingSignalAttributes.AcousticalWeightings
-
A
- A - Static variable in class nxopen.cae.SignalProcessingPlotData.AcousticalWeighting
-
A
- A - Static variable in class nxopen.cae.SimLoadRecipeFunctionAttributes.AcousticalWeightings
-
A
- A - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.ParamPriDatum
-
A
- A - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.ParamSecDatum
-
A
- A - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.ParamTerDatum
-
A
- A - Static variable in class nxopen.cam.TurnToolBuilder.HolderStyles
-
A-Style
- A - Static variable in class nxopen.drawings.DrawingSheet.StandardSheetSize
-
8.5 x 11 inches
- A - Static variable in class nxopen.drawings.LetterFormatTypes
-
- A - Static variable in class nxopen.tooling.AssemblyDrawingBuilder.AttributeValues
-
- A0 - Static variable in class nxopen.cam.InspectionGraphicalReportOutputBuilder.PageSizeType
-
- A0 - Static variable in class nxopen.cam.WorkInstructionOutputBuilder.PageSizeType
-
- A0 - Static variable in class nxopen.drawings.DrawingSheet.StandardSheetSize
-
841 x 1189 millimeters
- a0 - Variable in class nxopen.mechatronics.CamProfileBuilder.Element
-
segment polynomial coefficient
- A0LANDSCAPE - Static variable in class nxopen.ame.FormSheetBuilder.StandardMetricSize
-
- A0SIZE - Static variable in class nxopen.linedesigner.ExportToDWGBuilder.TemplateTypeAPI
-
Represents the A0 type
- a1() - Method in interface nxopen.annotations.DraftingSurfaceFinishBuilder
-
Returns the a1
License requirements: None.
- a1() - Method in interface nxopen.annotations.SurfaceFinishBuilder
-
Returns the a1
License requirements: None.
- A1 - Static variable in class nxopen.cam.InspectionGraphicalReportOutputBuilder.PageSizeType
-
- A1 - Static variable in class nxopen.cam.WorkInstructionOutputBuilder.PageSizeType
-
- A1 - Static variable in class nxopen.drawings.DrawingSheet.StandardSheetSize
-
594 X 841 millimeters
- a1 - Variable in class nxopen.mechatronics.CamProfileBuilder.Element
-
segment polynomial coefficient
- a18 - Variable in class nxopen.HumanPosturePredictionBuilder.HandDataSaeData
-
the steering wheel outside diameter W9 expression
- A1LANDSCAPE - Static variable in class nxopen.ame.FormSheetBuilder.StandardMetricSize
-
- A1SIZE - Static variable in class nxopen.linedesigner.ExportToDWGBuilder.TemplateTypeAPI
-
Represents the A1 type
- a2() - Method in interface nxopen.annotations.DraftingSurfaceFinishBuilder
-
Returns the a2
License requirements: None.
- a2() - Method in interface nxopen.annotations.SurfaceFinishBuilder
-
Returns the a2
License requirements: None.
- A2 - Static variable in class nxopen.cam.InspectionGraphicalReportOutputBuilder.PageSizeType
-
- A2 - Static variable in class nxopen.cam.WorkInstructionOutputBuilder.PageSizeType
-
- A2 - Static variable in class nxopen.drawings.DrawingSheet.StandardSheetSize
-
420 X 594 millimeters
- a2 - Variable in class nxopen.mechatronics.CamProfileBuilder.Element
-
segment polynomial coefficient
- A2 - Static variable in class nxopen.PrintBuilder.PaperSize
-
A2 sheet, 420 x 594-millimeters
- A2LANDSCAPE - Static variable in class nxopen.ame.FormSheetBuilder.StandardMetricSize
-
- A2SIZE - Static variable in class nxopen.linedesigner.ExportToDWGBuilder.TemplateTypeAPI
-
Represents the A2 type
- A3 - Static variable in class nxopen.cam.InspectionGraphicalReportOutputBuilder.PageSizeType
-
- A3 - Static variable in class nxopen.cam.TurnToolBuilder.ReliefAngleTypes
-
Relief angle type: A (3)
- A3 - Static variable in class nxopen.cam.WorkInstructionOutputBuilder.PageSizeType
-
- A3 - Static variable in class nxopen.drawings.DrawingSheet.StandardSheetSize
-
297 X 420 millimeters
- a3 - Variable in class nxopen.mechatronics.CamProfileBuilder.Element
-
segment polynomial coefficient
- A3 - Static variable in class nxopen.PrintBuilder.PaperSize
-
A3 sheet, 297- by 420-millimeters
- A3EXTRA - Static variable in class nxopen.PrintBuilder.PaperSize
-
A3 Extra 322 x 445-millimeters
- A3EXTRA_TRANSVERSE - Static variable in class nxopen.PrintBuilder.PaperSize
-
A3 Extra Transverse 322 x 445-millimeters
- A3LANDSCAPE - Static variable in class nxopen.ame.FormSheetBuilder.StandardMetricSize
-
- A3ROTATED - Static variable in class nxopen.PrintBuilder.PaperSize
-
A3 rotated sheet, 420- by 297-millimeters: Windows 98/Me, Windows NT 4.0 and later
- A3SIZE - Static variable in class nxopen.linedesigner.ExportToDWGBuilder.TemplateTypeAPI
-
Represents the A3 type
- A3TRANSVERSE - Static variable in class nxopen.PrintBuilder.PaperSize
-
A3 Transverse 297 x 420-millimeters
- A3X_CIRCULAR - Static variable in class nxopen.cam.ToolpathEventType
-
- A3X_CIRCULAR_CUST_FEED - Static variable in class nxopen.cam.ToolpathEventType
-
- A3X_CIRCULAR_WITH_FEED - Static variable in class nxopen.cam.ToolpathEventType
-
- A3X_CNTCT_CIR - Static variable in class nxopen.cam.ToolpathEventType
-
- A3X_CNTCT_CIR_CUST_FEED - Static variable in class nxopen.cam.ToolpathEventType
-
- A3X_CNTCT_CIR_WITH_FEED - Static variable in class nxopen.cam.ToolpathEventType
-
- A3X_CNTCT_HEL - Static variable in class nxopen.cam.ToolpathEventType
-
- A3X_CNTCT_HEL_CUST_FEED - Static variable in class nxopen.cam.ToolpathEventType
-
- A3X_CNTCT_HEL_WITH_FEED - Static variable in class nxopen.cam.ToolpathEventType
-
- A3X_CNTCT_LIN - Static variable in class nxopen.cam.ToolpathEventType
-
- A3X_CNTCT_LIN_CUST_FEED - Static variable in class nxopen.cam.ToolpathEventType
-
- A3X_CNTCT_LIN_WITH_FEED - Static variable in class nxopen.cam.ToolpathEventType
-
- A3X_HELICAL - Static variable in class nxopen.cam.ToolpathEventType
-
- A3X_HELICAL_CUST_FEED - Static variable in class nxopen.cam.ToolpathEventType
-
- A3X_HELICAL_WITH_FEED - Static variable in class nxopen.cam.ToolpathEventType
-
- A3X_LINEAR - Static variable in class nxopen.cam.ToolpathEventType
-
- A3X_LINEAR_CUST_FEED - Static variable in class nxopen.cam.ToolpathEventType
-
- A3X_LINEAR_WITH_FEED - Static variable in class nxopen.cam.ToolpathEventType
-
- A3X_NURBS - Static variable in class nxopen.cam.ToolpathEventType
-
- A3X_NURBS_CUST_FEED - Static variable in class nxopen.cam.ToolpathEventType
-
- A3X_NURBS_WITH_FEED - Static variable in class nxopen.cam.ToolpathEventType
-
- A4 - Static variable in class nxopen.cam.InspectionGraphicalReportOutputBuilder.PageSizeType
-
- A4 - Static variable in class nxopen.cam.WorkInstructionOutputBuilder.PageSizeType
-
- A4 - Static variable in class nxopen.drawings.DrawingSheet.StandardSheetSize
-
210 X 297 millimeters
- a4 - Variable in class nxopen.mechatronics.CamProfileBuilder.Element
-
segment polynomial coefficient
- A4 - Static variable in class nxopen.PrintBuilder.PaperSize
-
A4 sheet, 210- by 297-millimeters
- A4EXTRA - Static variable in class nxopen.PrintBuilder.PaperSize
-
A4 sheet, 9.27 x 12.69 inches
- A4LANDSCAPE - Static variable in class nxopen.ame.FormSheetBuilder.StandardMetricSize
-
- A4PLUS - Static variable in class nxopen.PrintBuilder.PaperSize
-
A4 Plus 210 x 330-millimeters
- A4PORTRAIT - Static variable in class nxopen.ame.FormSheetBuilder.StandardMetricSize
-
- A4ROTATED - Static variable in class nxopen.PrintBuilder.PaperSize
-
A4 rotated sheet, 297- by 210-millimeters: Windows 98/Me, Windows NT 4.0 and later
- A4SIZE - Static variable in class nxopen.linedesigner.ExportToDWGBuilder.TemplateTypeAPI
-
Represents the A4 type
- A4SMALL - Static variable in class nxopen.PrintBuilder.PaperSize
-
A4 small sheet, 210- by 297-millimeters
- A4TRANSVERSE - Static variable in class nxopen.PrintBuilder.PaperSize
-
A4 Transverse 210 x 297 millimeters
- a5 - Variable in class nxopen.mechatronics.CamProfileBuilder.Element
-
segment polynomial coefficient
- A5 - Static variable in class nxopen.PrintBuilder.PaperSize
-
A5 sheet, 148- by 210-millimeters
- A5EXTRA - Static variable in class nxopen.PrintBuilder.PaperSize
-
A5 Extra 174 x 235-millimeters
- A5ROTATED - Static variable in class nxopen.PrintBuilder.PaperSize
-
A5 rotated sheet, 210- by 148-millimeters: Windows 98/Me, Windows NT 4.0 and later
- A5TRANSVERSE - Static variable in class nxopen.PrintBuilder.PaperSize
-
A5 Transverse 148 x 210-millimeters
- A5X_CIRCULAR - Static variable in class nxopen.cam.ToolpathEventType
-
- A5X_CIRCULAR_CUST_FEED - Static variable in class nxopen.cam.ToolpathEventType
-
- A5X_CIRCULAR_WITH_FEED - Static variable in class nxopen.cam.ToolpathEventType
-
- A5X_CNTCT_CIR - Static variable in class nxopen.cam.ToolpathEventType
-
- A5X_CNTCT_CIR_CUST_FEED - Static variable in class nxopen.cam.ToolpathEventType
-
- A5X_CNTCT_CIR_WITH_FEED - Static variable in class nxopen.cam.ToolpathEventType
-
- A5X_CNTCT_HEL - Static variable in class nxopen.cam.ToolpathEventType
-
- A5X_CNTCT_HEL_CUST_FEED - Static variable in class nxopen.cam.ToolpathEventType
-
- A5X_CNTCT_HEL_WITH_FEED - Static variable in class nxopen.cam.ToolpathEventType
-
- A5X_CNTCT_LIN - Static variable in class nxopen.cam.ToolpathEventType
-
- A5X_CNTCT_LIN_CUST_FEED - Static variable in class nxopen.cam.ToolpathEventType
-
- A5X_CNTCT_LIN_WITH_FEED - Static variable in class nxopen.cam.ToolpathEventType
-
- A5X_HELICAL - Static variable in class nxopen.cam.ToolpathEventType
-
- A5X_HELICAL_CUST_FEED - Static variable in class nxopen.cam.ToolpathEventType
-
- A5X_HELICAL_WITH_FEED - Static variable in class nxopen.cam.ToolpathEventType
-
- A5X_NURBS - Static variable in class nxopen.cam.ToolpathEventType
-
- A5X_NURBS_CUST_FEED - Static variable in class nxopen.cam.ToolpathEventType
-
- A5X_NURBS_WITH_FEED - Static variable in class nxopen.cam.ToolpathEventType
-
- a6 - Variable in class nxopen.mechatronics.CamProfileBuilder.Element
-
segment polynomial coefficient
- A6 - Static variable in class nxopen.PrintBuilder.PaperSize
-
A6 sheet, 105- by 148-millimeters: Windows 98/Me, Windows NT 4.0 and later
- A6ROTATED - Static variable in class nxopen.PrintBuilder.PaperSize
-
A6 rotated sheet, 148- by 105-millimeters: Windows 98/Me, Windows NT 4.0 and later
- AA - Static variable in class nxopen.annotations.CuttingPlaneSymbolBuilder.ViewNameFormatOption
-
View Name is in the 'Section Prefix A-A' format, Where Where Section Prefix is taken from PMI Preferences
and A is the Text of the PMI Cutting Plane Symbol.
- AA - Static variable in class nxopen.cae.responsesimulation.RSEventSolverParameters.DdamCoefficientType
-
- AA - Static variable in class nxopen.drawings.LetterFormatTypes
-
- AA1 - Static variable in class nxopen.drawings.LetterFormatTypes
-
- aasamplesEnum() - Method in interface nxopen.display.StudioImageCaptureBuilder
-
Returns the antialiasing samples enum
License requirements: None.
- aaxis() - Method in interface nxopen.cam.AlongMachineAxisMoveBuilder
-
Returns the A position
License requirements: None.
- AAXIS - Static variable in class nxopen.uf.UFPath.Axis
-
- AB - Static variable in class nxopen.cae.FemSignalProcessingSignalAttributes.AcousticalWeightings
-
AB
- AB - Static variable in class nxopen.cae.responsesimulation.RSEventSolverParameters.DdamCoefficientType
-
- AB - Static variable in class nxopen.cae.SignalProcessingPlotData.AcousticalWeighting
-
AB
- AB - Static variable in class nxopen.cae.SimLoadRecipeFunctionAttributes.AcousticalWeightings
-
AB
- ABAQUS - Static variable in class nxopen.cae.Result.Filetype
-
- ABAQUS_ODB - Static variable in class nxopen.cae.Result.Filetype
-
- ABB - Interface in nxopen.cae.aerostructures.author
-
Represents a AeroStruct application building block (ABB)
To obtain an instance of this class, refer to
Session
Created in NX12.0.0
- ABB.CurvedMetallicPanelCompressiveBucklingCoefficientData - Class in nxopen.cae.aerostructures.author
-
- ABB.CurvedMetallicPanelShearBucklingCoefficientData - Class in nxopen.cae.aerostructures.author
-
- ABB.EdgeSupportType - Class in nxopen.cae.aerostructures.author
-
Type of support along the edges, the choice is between SimplySupported and Clamped
- ABB.EquivalentSectionPropertiesData - Class in nxopen.cae.aerostructures.author
-
- ABB.ExtrudedMetallicSubSectionCripplingAllowableData - Class in nxopen.cae.aerostructures.author
-
- ABB.FlatMetallicPanelBendingBucklingCoefficientData - Class in nxopen.cae.aerostructures.author
-
- ABB.FlatMetallicPanelCompressiveBucklingCoefficientData - Class in nxopen.cae.aerostructures.author
-
- ABB.FlatMetallicPanelShearBucklingCoefficientData - Class in nxopen.cae.aerostructures.author
-
- ABB.LoadDistributionBoltsConcentricLoadsData - Class in nxopen.cae.aerostructures.author
-
- ABB.MaterialBehaviour - Class in nxopen.cae.aerostructures.author
-
Material behaivour type, the choices are: {Elastic, Elastic-plastic}
- ABB.MaterialFsyEstimationData - Class in nxopen.cae.aerostructures.author
-
- ABB.MetallicPanelCompressivePlasticityCurveBc1Data - Class in nxopen.cae.aerostructures.author
-
- ABB.MetallicPanelCompressivePlasticityCurveBc2Data - Class in nxopen.cae.aerostructures.author
-
- ABB.MetallicPanelCompressivePlasticityCurveBc3Data - Class in nxopen.cae.aerostructures.author
-
- ABB.MsAllowableData - Class in nxopen.cae.aerostructures.author
-
- ABB.MsBearingData - Class in nxopen.cae.aerostructures.author
-
- ABB.MsBoltBendingData - Class in nxopen.cae.aerostructures.author
-
- ABB.MsBoltCombinedShearTensionBendingData - Class in nxopen.cae.aerostructures.author
-
This class holds the data returned from
ABB.msBoltCombinedShearTensionBending(double, double[], double, double, double, double[], double[], double, double, double[], double[])
- ABB.MsBoltCombinedShearTensionData - Class in nxopen.cae.aerostructures.author
-
- ABB.MsBoltShearData - Class in nxopen.cae.aerostructures.author
-
- ABB.MsMaterialStressAllowableData - Class in nxopen.cae.aerostructures.author
-
- ABB.MsNetSectionData - Class in nxopen.cae.aerostructures.author
-
- ABB.MsPlateBucklingCurvedCompressiveData - Class in nxopen.cae.aerostructures.author
-
- ABB.MsPlateBucklingCurvedLongitudinalShearCombinedData - Class in nxopen.cae.aerostructures.author
-
This class holds the data returned from
ABB.msPlateBucklingCurvedLongitudinalShearCombined(double, double, double, double, double, double, nxopen.cae.aerostructures.author.ABB.EdgeSupportType, double, nxopen.cae.aerostructures.author.ABB.MaterialBehaviour, double[], double[])
- ABB.MsPlateBucklingCurvedShearData - Class in nxopen.cae.aerostructures.author
-
- ABB.MsPlateBucklingData - Class in nxopen.cae.aerostructures.author
-
- ABB.MsPlateBucklingFlatBendingData - Class in nxopen.cae.aerostructures.author
-
- ABB.MsPlateBucklingFlatCompressiveData - Class in nxopen.cae.aerostructures.author
-
- ABB.MsPlateBucklingFlatLongitudinalBendingCombinedData - Class in nxopen.cae.aerostructures.author
-
This class holds the data returned from
ABB.msPlateBucklingFlatLongitudinalBendingCombined(double, double, double, double, double, double, nxopen.cae.aerostructures.author.ABB.UnloadedEdgeSupportType, nxopen.cae.aerostructures.author.ABB.EdgeSupportType, nxopen.cae.aerostructures.author.ABB.MaterialBehaviour, double[], double[])
- ABB.MsPlateBucklingFlatLongitudinalShearCombinedData - Class in nxopen.cae.aerostructures.author
-
This class holds the data returned from
ABB.msPlateBucklingFlatLongitudinalShearCombined(double, double, double, double, double, double, nxopen.cae.aerostructures.author.ABB.UnloadedEdgeSupportType, nxopen.cae.aerostructures.author.ABB.EdgeSupportType, nxopen.cae.aerostructures.author.ABB.MaterialBehaviour, double[], double[])
- ABB.MsPlateBucklingFlatShearBendingCombinedData - Class in nxopen.cae.aerostructures.author
-
This class holds the data returned from
ABB.msPlateBucklingFlatShearBendingCombined(double, double, double, double, double, double, nxopen.cae.aerostructures.author.ABB.UnloadedEdgeSupportType, nxopen.cae.aerostructures.author.ABB.EdgeSupportType, nxopen.cae.aerostructures.author.ABB.MaterialBehaviour, double[], double[], double[])
- ABB.MsPlateBucklingFlatShearData - Class in nxopen.cae.aerostructures.author
-
- ABB.MsShearTearOutData - Class in nxopen.cae.aerostructures.author
-
- ABB.MsTrescaPlaneStressData - Class in nxopen.cae.aerostructures.author
-
- ABB.MsTsaiHillPlaneStressData - Class in nxopen.cae.aerostructures.author
-
- ABB.SecantModulusData - Class in nxopen.cae.aerostructures.author
-
- ABB.Status - Class in nxopen.cae.aerostructures.author
-
ABB return status
- ABB.StressF07Data - Class in nxopen.cae.aerostructures.author
-
- ABB.StressFromStrainInPlasticDomainData - Class in nxopen.cae.aerostructures.author
-
- ABB.TangentModulusData - Class in nxopen.cae.aerostructures.author
-
- ABB.UnloadedEdgeSupportType - Class in nxopen.cae.aerostructures.author
-
Type of support along unloaded edges, the choices are: {Clamped-Clamped, Simply Supported-Clamped, Simply Supported-Simply Supported, Free-Clamped, Free-Simply Supported}
- ABBFactory - Class in nxopen.cae.aerostructures.author
-
- ABBFactory() - Constructor for class nxopen.cae.aerostructures.author.ABBFactory
-
- ABBREVIATE - Static variable in class nxopen.annotations.TableCellStyleBuilder.FitMethodType
-
- abbreviation() - Method in interface nxopen.Unit
-
- ABC - Static variable in class nxopen.motion.BushingDefine.ForceCalculationOption
-
ABC
- abcd - Variable in class nxopen.cae.AfuMathFastRMSOutput.PsdfitFittedData
-
- abcissa - Variable in class nxopen.cae.Post.GraphParameters
-
- ABDOMINAL_DEPTH - Static variable in class nxopen.HumanData.AdvancedScalingType
-
Indicate scaling of abdominal depth
- ABEND - Static variable in class nxopen.tooling.BendInsertDesignBuilder.BendTypeOption
-
angle bend
- ABORT - Static variable in class nxopen.cae.PostGraphBuilder.EvalutionErrors
-
- ABORT - Static variable in class nxopen.cae.PostGraphBuilder.IncompatibleResult
-
- ABORT - Static variable in class nxopen.cae.ResultsCombinationBuilder.EvaluationError
-
- ABORT - Static variable in class nxopen.cae.ResultsCombinationBuilder.IncompatibleResults
-
- ABORT - Static variable in class nxopen.cae.ResultsEnvelopeBuilder.IncompatibleResults
-
- ABORT - Static variable in class nxopen.cae.ResultsReductionBuilder.EvaluationError
-
- ABORT - Static variable in class nxopen.cae.ResultsReductionBuilder.IncompatibleResults
-
- ABORT - Static variable in class nxopen.cae.TransientResultsReductionBuilder.EvaluationError
-
- ABORT - Static variable in class nxopen.cae.TransientResultsReductionBuilder.IncompatibleResults
-
- abort() - Method in interface nxopen.UFSession
-
- aborted - Variable in class nxopen.motion.PostProcess.CreateEnvelopeData
-
True if user hits the stop button, false otherwise
- ABORTED_BY_USER - Static variable in class nxopen.assemblies.ClearanceSet.JobStatus
-
- ABORTED_ON_ERROR - Static variable in class nxopen.assemblies.ClearanceSet.JobStatus
-
- abortOnFailure() - Method in interface nxopen.LoadOptions
-
Returns the option that specifies what action the system should take if
it can't find a component part file
License requirements: None.
- ABOUT_OBJECT_CENTER - Static variable in class nxopen.features.StudioXformBuilder.RotatingPivotType
-
Deprecated.
Rotate pivot at the object center
- ABOUT_OBJECT_CENTER - Static variable in class nxopen.features.StudioXformBuilder.ScalingCenterType
-
Deprecated.
Scale center at the object center
- ABOUT_POINT - Static variable in class nxopen.features.StudioXformBuilder.RotatingPivotType
-
Deprecated.
Rotate pivot at a point
- ABOUT_POINT - Static variable in class nxopen.features.StudioXformBuilder.ScalingCenterType
-
Deprecated.
Scale center at a point
- ABOUT_SELECTED_OBJECT - Static variable in class nxopen.features.StudioXformBuilder.RotatingPivotType
-
Deprecated.
Rotate pivot at the selected object
- ABOUT_SELECTED_OBJECT - Static variable in class nxopen.features.StudioXformBuilder.ScalingCenterType
-
Deprecated.
Scale center at the selected object
- ABOVE - Static variable in class nxopen.ame.GeneralAnnotationSettingsBuilder.HorizontalTextPosition
-
- ABOVE - Static variable in class nxopen.annotations.DiameterRadiusSymbolPlacement
-
Specifies diameter/radius symbol is placed above dimension text
- ABOVE - Static variable in class nxopen.annotations.DualDimensionPlacement
-
Specifies dual dimension above primary dimension
- ABOVE - Static variable in class nxopen.annotations.StackAlignmentPosition
-
- ABOVE - Static variable in class nxopen.annotations.Table.InsertRowsType
-
Insert row above.
- ABOVE - Static variable in class nxopen.annotations.TableSectionStyleBuilder.DisplayContinuationNoteType
-
Above
- ABOVE - Static variable in class nxopen.annotations.TableSectionStyleBuilder.LocationOfHeader
-
Above
- ABOVE - Static variable in class nxopen.annotations.TolerancePlacement
-
Specifies tolerance above dimension text
- ABOVE - Static variable in class nxopen.assemblies.PlaneSearchTerm.PlaneOverlapLogicType
-
Include objects residing above the plane defined by this search term
- ABOVE - Static variable in class nxopen.diagramming.DiagrammingConnectionlabelhorizontaloffsetposition
-
Above
- ABOVE - Static variable in class nxopen.drawings.LabelPositionTypes
-
- ABOVE - Static variable in class nxopen.drawings.ScalePositionTypes
-
- ABOVE - Static variable in class nxopen.features.EmbossRegion.ConvexityOption
-
Indicates the emboss geometry is above the target("Pad").
- ABOVE - Static variable in class nxopen.features.shipdesign.ShipCoordinatesBuilder.ZDirectionType
-
- ABOVE - Static variable in class nxopen.openxml.ImageDocumentData.CaptionPosition
-
the above position
- ABOVE - Static variable in class nxopen.openxml.TableDocumentData.CaptionPosition
-
the above position
- ABOVE - Static variable in class nxopen.uf.UFGdt.TextLocation
-
- ABOVE_BINDER - Static variable in class nxopen.tooling.LsdynaGeometryPreparationBuilder.BlankPosition
-
Blank sheet body is above binder.
- ABOVE_BINDERAND_PUNCH - Static variable in class nxopen.tooling.LsdynaGeometryPreparationBuilder.BlankPosition
-
Blank sheet body is above binder and punch.
- ABOVE_OR_INTERSECTS - Static variable in class nxopen.assemblies.PlaneSearchTerm.PlaneOverlapLogicType
-
Include objects residing above or intersecting the plane defined by this search term
- ABOVE_STUB - Static variable in class nxopen.annotations.NarrowDisplayOption
-
Displays narrow dimension above stub
- ABOVE_STUB - Static variable in class nxopen.annotations.TextPosition
-
Specifies text position above stub
- ABOVE_STUB - Static variable in class nxopen.drawings.ViewDetailLabelBuilder.LabelParentTextPlacement
-
- ABOVE_TRESHOLD - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.ThreshType
-
Filter out results above the specified value
- aboveText() - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder
-
Returns the above text
License requirements: None.
- aboveTextType() - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder
-
Returns the above text enum
License requirements: None.
- ABS - Static variable in class nxopen.cae.responsesimulation.CombinationEvaluationOptions.EvaluationMethod
-
- ABS - Static variable in class nxopen.cae.responsesimulation.CombinationEvaluationOptions.MultipleExcitationCombinationMethod
-
- abs() - Method in interface nxopen.cae.ResultVariable
-
Returns the Absolute value from result
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- ABS_MAX - Static variable in class nxopen.cae.LaminateGraphicalReportBuilder.EnvelopeRule
-
Keep maximum absolute values
- ABS_MAX - Static variable in class nxopen.cae.LaminateQuickReportBuilder.EnvelopeRule
-
Keep maximum absolute values
- ABS_MAX - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.EnvelopeRule
-
Keep maximum absolute values
- ABS_MIN - Static variable in class nxopen.cae.LaminateGraphicalReportBuilder.EnvelopeRule
-
Keep minimum absolute values
- ABS_MIN - Static variable in class nxopen.cae.LaminateQuickReportBuilder.EnvelopeRule
-
Keep minimum absolute values
- ABS_MIN - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.EnvelopeRule
-
Keep minimum absolute values
- ABS_PERCENTAGE - Static variable in class nxopen.cae.xyplot.AnchorType
-
the position of the point in the set abscissa percentage
- AbscissaAndOrdinateAxisDefinitionData() - Constructor for class nxopen.cae.AfuData.AbscissaAndOrdinateAxisDefinitionData
-
- abscissaCustomMarkerLabel() - Method in interface nxopen.cae.xyplot.PlotGraphTemplate
-
Returns the abscissa custom marker label
License requirements: None.
- abscissaType - Variable in class nxopen.cae.AfuData.AbscissaAndOrdinateAxisDefinitionData
-
Abscissa specific data type
- abscissaType - Variable in class nxopen.cae.ftk.OptionSetting.RecordOptionData
-
Abscissa specific data type
- absCursorPos - Variable in class nxopen.uf.UFUi.AskSelCursorPosData
-
- ABSOLUTE - Static variable in class nxopen.assemblies.CreateNewComponentBuilder.ComponentOriginType
-
Set the origin type to absolute
- ABSOLUTE - Static variable in class nxopen.cae.BoltBuilder.SpiderDiameter
-
Specifies spider diameter in absolute terms
- ABSOLUTE - Static variable in class nxopen.cae.CfdAutoRefinementConstraintBuilder.Sizing
-
Set aboslute resolution
- ABSOLUTE - Static variable in class nxopen.cae.CfdContactPreventionConstraintBuilder.Sizing
-
- ABSOLUTE - Static variable in class nxopen.cae.CfdLocalResolutionConstraintBuilder.Sizing
-
- ABSOLUTE - Static variable in class nxopen.cae.CircularImprintBuilder.AroundEdgeDiaType
-
Absolute Diameter Value
- ABSOLUTE - Static variable in class nxopen.cae.connections.CsysType
-
Absolute CSYS
- ABSOLUTE - Static variable in class nxopen.cae.LaminateDynamicEventBuilder.ReferenceTypeEnum
-
- ABSOLUTE - Static variable in class nxopen.cae.LaminateRandomEventBuilder.ReferenceEnum
-
Deprecated.
- ABSOLUTE - Static variable in class nxopen.cae.optimization.TBSConstraintBuilder.MagnitudeType
-
Constraints could be given in absolute values
- ABSOLUTE - Static variable in class nxopen.cae.optimization.TBSTopologyControllerOptimizationParameters.VolumeDefinitionMethod
-
Specifying the absolute volume
- ABSOLUTE - Static variable in class nxopen.cae.Result.DeformationScale
-
- ABSOLUTE - Static variable in class nxopen.cam.CamInspectionOperationCsysreferencetypes
-
Relative to Absolute Coordinate System
- ABSOLUTE - Static variable in class nxopen.cam.InspectionAlignmentAssistantBuilder.IterativeTypes
-
Absolute Iterative Alignment type
- ABSOLUTE - Static variable in class nxopen.cam.InspectionAlignmentBuilder.IterDevTypes
-
Absolute deviation
- ABSOLUTE - Static variable in class nxopen.cam.InspectionAlignmentBuilder.RotateTableMethods
-
Rotate table to absolute value
- ABSOLUTE - Static variable in class nxopen.cam.InspectionConstructedFeatureBuilder.ExtractEdgeDistanceType
-
Use an absolute distance from edge
- ABSOLUTE - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.SirVecPCSABS
-
Absolute
- ABSOLUTE - Static variable in class nxopen.cam.ToolAxisInterpolate.TurnInterpolationMethodTypes
-
Absolute
- ABSOLUTE - Static variable in class nxopen.diagramming.DiagrammingLocationstyle
-
Absolute
- ABSOLUTE - Static variable in class nxopen.display.BoundedGridBuilder.LabelReferenceType
-
Use projection of absolute origin on the
grid plane to determine grid line offset
labels
- ABSOLUTE - Static variable in class nxopen.display.DynamicSectionTypes.CoordinateSystem
-
Absolute
- ABSOLUTE - Static variable in class nxopen.features.AestheticFaceBlendBuilder.RhoType
-
Absolute Rho: does not take into account the subtended angle
- ABSOLUTE - Static variable in class nxopen.features.AssociativeArcBuilder.CenterReference
-
Absolute CSYS
- ABSOLUTE - Static variable in class nxopen.features.AssociativeArcBuilder.EndReference
-
Absolute CSYS
- ABSOLUTE - Static variable in class nxopen.features.AssociativeArcBuilder.MidReference
-
Absolute CSYS
- ABSOLUTE - Static variable in class nxopen.features.AssociativeArcBuilder.StartReference
-
Absolute CSYS
- ABSOLUTE - Static variable in class nxopen.features.AssociativeLineBuilder.EndReference
-
Absolute
- ABSOLUTE - Static variable in class nxopen.features.AssociativeLineBuilder.StartReference
-
Absolute
- ABSOLUTE - Static variable in class nxopen.features.EdgeBlendBuilder.Rhotype
-
- ABSOLUTE - Static variable in class nxopen.features.FaceBlendBuilder.RhoMethod
-
Absolute (NX) rho type
- ABSOLUTE - Static variable in class nxopen.features.SectionInertiaAnalysisBuilder.CoordSys
-
Absolute Coordinate System
- ABSOLUTE - Static variable in class nxopen.features.StudioXformBuilder.FeatureType
-
Deprecated.
Absolute feature type of Xform
- ABSOLUTE - Static variable in class nxopen.features.StudioXformBuilderEx.FeatureType
-
Absolute feature type of Xform
- ABSOLUTE - Static variable in class nxopen.features.vehicledesign.BaseDataLoadingWheelBuilder.DataDefinitionOptions
-
Absolute: The wheel data of this loading will use absolute values.
- ABSOLUTE - Static variable in class nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder.CurvatureTypes
-
Absolute
- ABSOLUTE - Static variable in class nxopen.geometricanalysis.GapFlushnessBuilder.EvaluationTypes
-
absolute
- ABSOLUTE - Static variable in class nxopen.geometricanalysis.SurfaceContinuityAnalysisBuilder.CurvatureType
-
- ABSOLUTE - Static variable in class nxopen.geometricutilities.PointsFromFileBuilder.Options
-
Absolute coordinates
- ABSOLUTE - Static variable in class nxopen.IgesCreator.CsysrefEnum
-
export data with respect to absolute CSYS
- ABSOLUTE - Static variable in class nxopen.JtCreator.ChordalValue
-
ABSOLUTE
- ABSOLUTE - Static variable in class nxopen.mechanicalrouting.PathTransitionBuilder.HealOrientation
-
- ABSOLUTE - Static variable in class nxopen.motion.GraphBuilder.CsysChoices
-
Deprecated.
Absolute
- ABSOLUTE - Static variable in class nxopen.motion.MotionSensorBuilder.Reference
-
absolute reference frame
- ABSOLUTE - Static variable in class nxopen.motion.PackagingInterferenceBuilder.Frame
-
Interference solids positioned in absolute
coordinate system.
- ABSOLUTE - Static variable in class nxopen.motion.PackagingTraceBuilder.Frame
-
Traced copies positioned in absolute coordinate system.
- ABSOLUTE - Static variable in class nxopen.motion.PostProcess.EnvelopeToleranceTypes
-
- ABSOLUTE - Static variable in class nxopen.motion.VobjectCsysType
-
Absolute csys type
- ABSOLUTE - Static variable in class nxopen.tooling.AddReusablePart.PositionMethod
-
- ABSOLUTE - Static variable in class nxopen.uf.UFMotion.ReferenceFrame
-
- ABSOLUTE - Static variable in class nxopen.weld.WeldJointBuilder.CoordinateSystem
-
Desired points and vectors should be in absolute coordinates.
- ABSOLUTE_CYLINDRICAL - Static variable in class nxopen.cae.Result.CoordinateSystem
-
- ABSOLUTE_DISPLAYED_PART - Static variable in class nxopen.tooling.StockSizeBuilder.RefCsysType
-
reference ABS in displayed part
- ABSOLUTE_FLOW - Static variable in class nxopen.routing.SplitDuctBuilder.FlowTypes
-
Absolute flow
- ABSOLUTE_GAP - Static variable in class nxopen.features.SilhouetteFlangeBuilder.Types
-
Absolute gap Silhouette Flange
- ABSOLUTE_MAX - Static variable in class nxopen.cae.AfuMathOperation.TimeToSrsResponseType
-
Absolute Maximum
- ABSOLUTE_MAXIMUM - Static variable in class nxopen.cae.AxiSymmetricParameters.EnvVal
-
- ABSOLUTE_MAXIMUM - Static variable in class nxopen.cae.CyclicSymmetricParameters.EnvelopeValue
-
- ABSOLUTE_MAXIMUM - Static variable in class nxopen.cae.CyclicSymmetricParameters.Value
-
- ABSOLUTE_MAXIMUM - Static variable in class nxopen.cae.Result.ComputationType
-
absolute maximum of the node
- ABSOLUTE_MAXIMUM - Static variable in class nxopen.cae.ResultProbeBuilder.CombineAcrossIterations
-
- ABSOLUTE_MINIMUM - Static variable in class nxopen.cae.AxiSymmetricParameters.EnvVal
-
- ABSOLUTE_MINIMUM - Static variable in class nxopen.cae.CyclicSymmetricParameters.EnvelopeValue
-
- ABSOLUTE_MINIMUM - Static variable in class nxopen.cae.CyclicSymmetricParameters.Value
-
- ABSOLUTE_MINIMUM - Static variable in class nxopen.cae.Result.ComputationType
-
absolute minimum of the node
- ABSOLUTE_MINIMUM - Static variable in class nxopen.cae.ResultProbeBuilder.CombineAcrossIterations
-
- ABSOLUTE_ORIGIN - Static variable in class nxopen.assemblies.DesignElementBuilder.PositioningOption
-
Applies absolute origin position on the design elements
- ABSOLUTE_ORIGIN - Static variable in class nxopen.mechatronics.ECADImportBuilder.PositionMode
-
Deprecated.
Absolute Origin
- ABSOLUTE_ORIGIN - Static variable in class nxopen.motion.FlexBodyBuilder.Positioning
-
Positioning to absolution place
- ABSOLUTE_ORIGIN - Static variable in class nxopen.tooling.SIZERImportBuilder.PositionMode
-
Absolute Origin
- ABSOLUTE_PRESSURE - Static variable in class nxopen.cae.Result.Quantity
-
- ABSOLUTE_RECTANGULAR - Static variable in class nxopen.cae.Result.CoordinateSystem
-
- ABSOLUTE_RESULT_PERCENT - Static variable in class nxopen.cae.Post.MarkHide
-
- ABSOLUTE_SPHERICAL - Static variable in class nxopen.cae.Result.CoordinateSystem
-
- ABSOLUTE_TIME - Static variable in class nxopen.motion.SignalChartListItem.Timer
-
Absolute time
- absoluteAttributeBuilder() - Method in interface nxopen.ame.ExtractAttributeBuilder
-
Returns the absolute attribute builder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- absoluteConvergence() - Method in interface nxopen.cae.optimization.DAOStopCondition
-
Returns the absolute convergence
License requirements: None.
- absoluteConvergenceCriteria() - Method in interface nxopen.optimization.OptimizationBuilder
-
Returns the absolute criteria for optimizer to determine convergence.
- absoluteDiaAroundEdge() - Method in interface nxopen.cae.CircularImprintBuilder
-
Returns an absolute dia around edge
License requirements: None.
- absoluteDiaAroundPoint() - Method in interface nxopen.cae.CircularImprintBuilder
-
Returns an absolute dia around point
License requirements: None.
- ABSOLUTEIN_DISPLAYED_PART - Static variable in class nxopen.features.ToolingBoxBuilder.RefCsysType
-
reference ABS in displayed part
- ABSOLUTELY_POSITIONED - Static variable in class nxopen.pdm.ModelElementRevision.PositioningStatus
-
- absolutelyPosition() - Method in interface nxopen.assemblies.AbsolutePositionBuilder
-
Returns the option to know whether the object is absolutely positioned or not
License requirements: None.
- absoluteMaximumPrincipalAngle() - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder
-
Returns the absoluteMaximumPrincipalAngle.
- absoluteMaximumPrincipalStrain() - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder
-
Returns the absoluteMaximumPrincipalStrain.
- absoluteMaximumPrincipalStress() - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder
-
Returns the absoluteMaximumPrincipalStress.
- absoluteMaximumShearStrain() - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder
-
Returns the absoluteMaximumShearStrain.
- absoluteMaximumShearStress() - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder
-
Returns the absoluteMaximumShearStress.
- absoluteOrigin() - Method in interface nxopen.View
-
Returns the view origin in absolute space.
- AbsolutePositionBuilder - Interface in nxopen.assemblies
-
Represents a builder class that absolutely positions the specified objects.
- absoluteScaleValue - Variable in class nxopen.cae.Result.DeformationParameters
-
Deprecated.
- AbsoluteTextSizeData() - Constructor for class nxopen.display.TransientText.AbsoluteTextSizeData
-
- absoluteValue - Variable in class nxopen.cae.Result.ResultParameters
-
Deprecated.
- ABSORBED_RADIATION - Static variable in class nxopen.cae.Result.Quantity
-
- absPercentage() - Method in interface nxopen.cae.xyplot.MarkerStyleSetting
-
Returns the scale of abscissa percentage setting, just for attachment type: Abscissa Percentage, and the value shuould be limited in [0.0, 1.0]
License requirements: None.
- abspos - Variable in class nxopen.uf.UFSf.AskNodeData
-
- AbstractionManager - Interface in nxopen.cae
-
Provides method for creating builder for
abstraction commands in a fem part
To obtain an instance of this class, refer to
FEModel
Created in NX7.5.0
- abstractionMgr() - Method in interface nxopen.cae.FEModel
-
Returns the circular imprint collection belonging to this fem part .
- abstractionType() - Method in interface nxopen.cae.SimSolution
-
Returns the abstraction type
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- absValueFilter() - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
Returns the absolute value filtering option
License requirements: None.
- absValueSort() - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
Returns the absolute value sorting option
License requirements: None.
- absXValue() - Method in interface nxopen.features.shipdesign.ShipCoordinatesBuilder
-
Returns the X value in absolute coordinate system.
- absYValue() - Method in interface nxopen.features.shipdesign.ShipCoordinatesBuilder
-
Returns the Y value in absolute coordinate system.
- absZValue() - Method in interface nxopen.features.shipdesign.ShipCoordinatesBuilder
-
Returns the Z value in absolute coordinate system.
- ABUT_BIN_A - Static variable in class nxopen.shipdesign.Generator.ClashType
-
Bounding b topology abuts bounding a topology on the inside.
- ABUT_BOUT_A - Static variable in class nxopen.shipdesign.Generator.ClashType
-
Bounding b topology abuts bounding a topology on the outside.
- ABUT_NO_CLASS - Static variable in class nxopen.shipdesign.Generator.ClashType
-
Bounding topologies abut, in/outside unknown.
- AC - Static variable in class nxopen.cae.responsesimulation.RSEventSolverParameters.DdamCoefficientType
-
- acadLayoutsToImport() - Method in interface nxopen.DxfdwgImporter
-
Returns the AcadLayoutsToImport command - generates a list of ACAD layouts
License requirements: None.
- ACCELERATED - Static variable in class nxopen.features.AestheticFaceBlendBuilder.ShapeType
-
Accelerated option will generate more shapes depending on the size of the center radius and continuity specified.
- acceleration() - Method in interface nxopen.cae.DurSpecialistSuperpositionEventBuilder
-
Returns the unit load acceleration
License requirements: None.
- ACCELERATION - Static variable in class nxopen.cae.FrfSet.Measure
-
Acceleration
- ACCELERATION - Static variable in class nxopen.cae.responsesimulation.EvaluationResultType
-
- ACCELERATION - Static variable in class nxopen.cae.responsesimulation.SensorResultType
-
- ACCELERATION - Static variable in class nxopen.cae.responsesimulation.TransmissibilityEvaluationSettingBuilder.MotionType
-
- ACCELERATION - Static variable in class nxopen.cae.Result.Quantity
-
- ACCELERATION - Static variable in class nxopen.cae.XyFunctionMeasure
-
Acceleration unit
- ACCELERATION - Static variable in class nxopen.motion.ControlInputPortBuilder.MeasuredVariable
-
Acceleration
- ACCELERATION - Static variable in class nxopen.motion.DriverMotionsData.DriverDataType
-
Acceleration
- ACCELERATION - Static variable in class nxopen.motion.DriverOperation.IntegrationType
-
Acceleration
- ACCELERATION - Static variable in class nxopen.motion.GraphBuilder.RequestChoices
-
Deprecated.
Acceleration
- ACCELERATION - Static variable in class nxopen.motion.MotionSensorBuilder.Types
-
acceleration sensor type
- acceleration - Variable in class nxopen.uf.UFMotion.JointMotionInput
-
- ACCELERATION_ABSOLUTE_MODAL - Static variable in class nxopen.cae.Result.Quantity
-
- ACCELERATION_CM - Static variable in class nxopen.cae.XyFunctionUnit
-
Acceleration unit: cm/sec^2
- ACCELERATION_FT - Static variable in class nxopen.cae.XyFunctionUnit
-
Acceleration unit: ft/sec^2
- ACCELERATION_GS - Static variable in class nxopen.cae.XyFunctionUnit
-
Acceleration unit: gs
- ACCELERATION_IN - Static variable in class nxopen.cae.XyFunctionUnit
-
Acceleration unit: in/sec ^2
- ACCELERATION_LEVEL_CROSSING_RATE - Static variable in class nxopen.cae.Result.Quantity
-
- ACCELERATION_M - Static variable in class nxopen.cae.XyFunctionUnit
-
Acceleration unit: m/sec^2
- ACCELERATION_MM - Static variable in class nxopen.cae.XyFunctionUnit
-
Acceleration unit: mm/sec^2
- accelerationColor() - Method in interface nxopen.preferences.SessionModeling
-
Returns the acceleration color
License requirements: None.
- accelerationExpression() - Method in interface nxopen.motion.DriverOperation
-
Returns the acceleration expression
License requirements: None.
- Accelerometer - Interface in nxopen.mechatronics
-
Represents the Accelerometer.
- AccelerometerBuilder - Interface in nxopen.mechatronics
-
- AccelerometerBuilder.OutputMeasureType - Class in nxopen.mechatronics
-
the Measure types.
- AccelerometerCollection - Interface in nxopen.mechatronics
-
Represents a collection of Accelerometer.
- accelerometers() - Method in interface nxopen.mechatronics.PhysicsManager
-
- ACCEPT - Static variable in class nxopen.blockstyler.Tree.EditControlOption
-
Use this option to allow edit.
- ACCEPT - Static variable in class nxopen.Update.FailureOption
-
Accept failure of failing objects
- ACCEPT_ALL - Static variable in class nxopen.Update.FailureOption
-
Accept failure of failing objects and subsequent objects
- ACCEPT_DRIVE_POSITION - Static variable in class nxopen.cam.CAMObject.Attr
-
- ACCEPT_TEXT - Static variable in class nxopen.blockstyler.Tree.EndLabelEditState
-
Use this option to accept the edited text.
- ACCEPTED - Static variable in class nxopen.geometricutilities.ParentEquivalencyMap.Status
-
accepted
- acceptedpointcount - Variable in class nxopen.cam.InspectionMeasDataBuilder.AcceptRejectExternalPointsData
-
the number of points accepted
- acceptLinkBroken(Tag) - Method in interface nxopen.uf.UFWave
-
- acceptMember(Tag, Tag) - Method in interface nxopen.uf.UFNcgroup
-
- acceptNewFacetBody() - Method in interface nxopen.features.RapidSurfaceBuilder
-
Accepts new facet body
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- acceptRejectExternalPoints() - Method in interface nxopen.cam.InspectionMeasDataBuilder
-
Accept and reject points as measured data
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- AcceptRejectExternalPointsData() - Constructor for class nxopen.cam.InspectionMeasDataBuilder.AcceptRejectExternalPointsData
-
- acceptSubdivision() - Method in interface nxopen.features.RapidSurfaceBuilder
-
Accepts subdivision
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- AccessorEvaluatorBuilder - Interface in nxopen.ame
-
- AccessorEvaluatorBuilder.AccessType - Class in nxopen.ame
-
Choices for access type either by an index or property
- AccessorEvaluatorBuilder.PositionTypeValue - Class in nxopen.ame
-
Choices for position to be either begin, end or defined by index
- accessTypeValue() - Method in interface nxopen.ame.AccessorEvaluatorBuilder
-
Returns the access type
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- accessVectorMethod() - Method in interface nxopen.cam.SurfaceContourBuilder
-
Returns the Access Vector Method
License requirements: None.
- accuracy() - Method in interface nxopen.display.ImageBasedLighting
-
Returns the accuracy of the lighting and shadows produced from the given image
License requirements: None.
- accuracy() - Method in interface nxopen.MassPropertiesBuilder
-
Returns the accuracy used for weight calculation during Update Now.
- accuracy() - Method in interface nxopen.MeasureFaces
-
Returns the accuracy value for calculations of the measurement
License requirements: None.
- accuracy - Variable in class nxopen.Measurement.MinimumDistanceData
-
Accuracy of calculation
- accuracy() - Method in interface nxopen.mfg.am.Nester3D
-
Returns the accuracy
License requirements: None.
- accuracy - Variable in class nxopen.uf.UFModeling.AskMinimumDist2Data
-
- accuracy - Variable in class nxopen.uf.UFModeling.AskMinimumDist3Data
-
- accuracy - Variable in class nxopen.uf.UFModl.CompareOptions
-
- accuracy - Variable in class nxopen.uf.UFWeight.Properties
-
- accuracyMode - Variable in class nxopen.motion.PostProcess.EnvelopeTolerance
-
Accuracy mode.
- achievedLength - Variable in class nxopen.uf.UFModlGeneral.CreateGeodesicCurvesData
-
- AcisExporter - Interface in nxopen
-
- AcisExporter.AcisVersionOption - Class in nxopen
-
ACIS Version options
- AcisImporter - Interface in nxopen
-
- acisVersion() - Method in interface nxopen.AcisExporter
-
Returns the Acis version - The version of ACIS file to be exported
License requirements: None.
- ACME - Static variable in class nxopen.cam.DrillThreadMillToolBuilder.ToolFormTypeTypes
-
Acme
- ACME - Static variable in class nxopen.cam.fbm.ThreadFeatureGeometry.Form
-
Form: Acme
- ACME - Static variable in class nxopen.cam.HoleBossGeom.FormTypes
-
Form: Acme
- ACOUSTIC - Static variable in class nxopen.cae.BaseIteration.IterationValueType
-
Value represents a Acoustic Mode
- ACOUSTIC - Static variable in class nxopen.cae.ResultProbeBuilder.SuperIterType
-
- ACOUSTIC - Static variable in class nxopen.cae.SimLoadSet.Type
-
Acoustic Load Set.
- ACOUSTIC - Static variable in class nxopen.cae.SimResultReference.Type
-
acoustic result
- ACOUSTIC_INTENSITY - Static variable in class nxopen.cae.Result.Quantity
-
- ACOUSTIC_POWER - Static variable in class nxopen.cae.Result.Quantity
-
- ACOUSTIC_POWER_DENSITY - Static variable in class nxopen.cae.Result.Quantity
-
- ACOUSTIC_PRESSURE - Static variable in class nxopen.cae.Result.Quantity
-
- ACOUSTIC_VELOCITY - Static variable in class nxopen.cae.Result.Quantity
-
- acousticalWeighting() - Method in interface nxopen.cae.FemSignalProcessingSignalAttributes
-
Returns the acoustical weighting
License requirements: None.
- acousticalWeighting() - Method in interface nxopen.cae.SimLoadRecipeFunctionAttributes
-
Returns the default acoustical weighting of the functions in the file
License requirements: None.
- acousticModeIndex() - Method in interface nxopen.cae.ResultProbeBuilder
-
Returns the acousticModes index
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- ACROMION_HEIGHT - Static variable in class nxopen.HumanData.AdvancedScalingType
-
Indicate scaling of acromion height
- acrossAssemblies() - Method in interface nxopen.routing.TransformPathBuilder
-
Returns the flag that indicates whether or not to transform. across the assemblies
License requirements: routing_base ("Routing Basic")
Created in NX8.0.0
- AcrossVoids - Interface in nxopen.cam
-
- acrossVoids() - Method in interface nxopen.cam.MillCutParameters
-
Returns the across voids
License requirements: None.
- AcrossVoids.MotionTypes - Class in nxopen.cam
-
Available types for Across Voids Method in planar mill operation
- ACS_DISPLAY_PART - Static variable in class nxopen.geometricutilities.OrientXpressBuilder.Reference
-
Reference CSYS is absolute coordinate system in the display part
- ACS_WORK_PART - Static variable in class nxopen.geometricutilities.OrientXpressBuilder.Reference
-
Reference CSYS is absolute coordinate system in the work part
- actAccept() - Method in interface nxopen.tooling.TraverseLoopBuilder
-
Accept current path.
- actBack() - Method in interface nxopen.tooling.TraverseLoopBuilder
-
Traverse back action.
- actClose() - Method in interface nxopen.tooling.TraverseLoopBuilder
-
Close current loop.
- actCycle() - Method in interface nxopen.tooling.TraverseLoopBuilder
-
Cycle candidate path.
- actEdgeSelection(NXObject[], NXObject[], NXObject[], Point3d, boolean) - Method in interface nxopen.tooling.TraverseLoopBuilder
-
Start traverse after selecting edges or curve.
- actExit() - Method in interface nxopen.tooling.TraverseLoopBuilder
-
Exit current loop.
- Action - Interface in nxopen.cae.qualityaudit
-
The Quality Audit Action is a base class that performs actions on a list of objects.
- action() - Method in interface nxopen.cae.qualityaudit.ActionSettings
-
Returns the action using these settings
License requirements: None.
- action() - Method in interface nxopen.cam.LowerLimit
-
Returns the Lower Limit Action
License requirements: None.
- action() - Method in interface nxopen.CGMBuilder
-
Returns the action option to be used when exporting the CGM file when in Teamcenter
mode.
- action() - Method in interface nxopen.PrintPDFBuilder
-
Returns the action option to be used when saving the PDF file in a Teamcenter environment.
- Action.Id - Class in nxopen.cae.qualityaudit
-
Action ids.
- ACTION_BUTTON - Static variable in class nxopen.uistyler.StylerItem.ItemType
-
Action Button item
- ACTION_ONLY - Static variable in class nxopen.motion.ScalarForceBuilder.ApplicationType
-
for Action Only Appplication type
- ACTION_ONLY - Static variable in class nxopen.motion.ScalarTorqueBuilder.AppType
-
ActionOnly
- ACTION_ONLY - Static variable in class nxopen.motion.VobjectApplicationType
-
for Action Only Appplication type
- ACTION_REACTION - Static variable in class nxopen.motion.ScalarForceBuilder.ApplicationType
-
for Action-Reaction Appplication type
- ACTION_REACTION - Static variable in class nxopen.motion.ScalarTorqueBuilder.AppType
-
Action-Reaction
- ACTION_REACTION - Static variable in class nxopen.motion.VobjectApplicationType
-
for Action-Reaction Appplication type
- ACTION_TORQUE - Static variable in class nxopen.motion.ControlOutputBuilder.VariableType
-
Output Variable type Action Torque.
- actionAngleTolerance() - Method in interface nxopen.motion.BodyContactLms
-
Returns the action angle tolerance
License requirements: None.
- actionCallback(MenuButtonEvent) - Method in interface nxopen.menubar.MenuBarManager.ActionCallback
-
Prototype for the action callbacks
License requirements: None.
- actionCsys() - Method in interface nxopen.motion.ScalarForceBuilder
-
Returns the action csys
License requirements: None.
- actionCsys() - Method in interface nxopen.motion.ScalarTorqueBuilder
-
Returns the action csys
License requirements: mechanisms ("MECHANISMS")
.
- actionDistanceTolerance() - Method in interface nxopen.motion.BodyContactLms
-
Returns the action distance tolerance
License requirements: None.
- actionEnableMaxFacetSize() - Method in interface nxopen.motion.BodyContactLms
-
Returns the action enable max facet size
License requirements: None.
- actionLink() - Method in interface nxopen.motion.BeamForceBuilder
-
Returns the action link object
License requirements: mechanisms ("MECHANISMS")
.
- actionLink() - Method in interface nxopen.motion.BushingDefine
-
Returns the action link
License requirements: None.
- actionLink() - Method in interface nxopen.motion.ConnectorBuilder
-
Returns the action link.
- actionLink() - Method in interface nxopen.motion.ScalarForceBuilder
-
Returns the action link
License requirements: None.
- actionLink() - Method in interface nxopen.motion.ScalarTorqueBuilder
-
Returns the action link attachment.
- actionLink() - Method in interface nxopen.motion.VObject
-
Returns the action link
License requirements: None.
- actionLinkAttachment() - Method in interface nxopen.motion.ControlOutputBuilder
-
Returns the action link attachment.
- actionLinkAttachment() - Method in interface nxopen.motion.LinkCouplerCoupleBuilder
-
Returns the Action Link Attachment
License requirements: mechanisms ("MECHANISMS")
.
- actionLinkAttachment() - Method in interface nxopen.motion.LinkDriverBuilder
-
Returns the Action Link Attachment
License requirements: mechanisms ("MECHANISMS")
.
- ActionList - Interface in nxopen.cae.qualityaudit
-
The Quality Audit ActionList class offers means to select, deselect, obtain
Action
instances.
- actionList() - Method in interface nxopen.cae.qualityaudit.Manager
-
Returns the quality audit action list.
- actionMaxFacetSize() - Method in interface nxopen.motion.BodyContactLms
-
Returns the action max facet size
License requirements: None.
- actionOffsetX() - Method in interface nxopen.motion.BushingDefine
-
Returns the offset to be applied on X Axis, if Action Offset is used
License requirements: mechanisms ("MECHANISMS")
.
- actionOffsetY() - Method in interface nxopen.motion.BushingDefine
-
Returns the offset to be applied on Y Axis, if Action Offset is used
License requirements: mechanisms ("MECHANISMS")
.
- actionOffsetZ() - Method in interface nxopen.motion.BushingDefine
-
Returns the offset to be applied on Z Axis, if Action Offset is used
License requirements: mechanisms ("MECHANISMS")
.
- actionOnError() - Method in interface nxopen.drawings.ConversionProcessSettingsBuilder
-
Returns the action on error
License requirements: None.
- actionPoint() - Method in interface nxopen.motion.BeamForceBuilder
-
Returns the action point.
- actionPoint() - Method in interface nxopen.motion.BushingDefine
-
Returns the action point
License requirements: None.
- actionPoint() - Method in interface nxopen.motion.ConnectorBuilder
-
Returns the action point.
- actionPoint() - Method in interface nxopen.motion.ScalarForceBuilder
-
Returns the action point
License requirements: None.
- actionPoint() - Method in interface nxopen.motion.ScalarTorqueBuilder
-
Returns the action point
License requirements: mechanisms ("MECHANISMS")
.
- ActionSettings - Interface in nxopen.cae.qualityaudit
-
The Quality Audit ActionSettings is the base class for
Action
settings.
- actionTessellationFile() - Method in interface nxopen.motion.BodyContactLms
-
Returns the action tessellation file
License requirements: mechanisms ("MECHANISMS")
.
- actionType() - Method in interface nxopen.drawings.MarkAsTemplateBuilder
-
Returns the action type of the part.
- actionType() - Method in interface nxopen.GroupBuilder
-
Returns the action type for this builder to perform.
- actionType() - Method in interface nxopen.linedesigner.ReuseLibraryDragData
-
Returns the action type of drag data
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- actionType() - Method in interface nxopen.motion.PackagingInterferenceBuilder
-
- actionType() - Method in interface nxopen.tooling.EjectorPostProcessingBuilder
-
Returns the trim method of ejector pin post processing.
- actionType() - Method in interface nxopen.tooling.ElectrodeInitializationBuilder
-
Returns the initialize method of initialize electrode project.
- actionType() - Method in interface nxopen.tooling.TrimMoldComponentsBuilder
-
Returns the action type defines the current trim method used to processing a mold components.
- actionType() - Method in interface nxopen.tooling.TrimSolidBuilder
-
Returns the action type of trim, subtract or just keep the region and the bounding box.
- actionUseTessellationFile() - Method in interface nxopen.motion.BodyContactLms
-
Returns the action tessellation file option
License requirements: mechanisms ("MECHANISMS")
.
- actionWhenGouging() - Method in interface nxopen.cam.MillCutParameters
-
Returns the action when gouging
License requirements: None.
- activate() - Method in interface nxopen.assemblies.Order
-
Applies this order
License requirements: None.
- activate() - Method in interface nxopen.assemblies.PositioningTask
-
- activate(boolean) - Method in interface nxopen.cae.DurSpecialistLocalDefinition
-
Activate the LocalDefinition.
- activate(boolean) - Method in interface nxopen.cae.DurSpecialistSolution
-
Activate the Solution.
- activate(boolean) - Method in interface nxopen.cae.responsesimulation.ModalProperties
-
Sets activate or deactivate status for all normal modes
License requirements: nx_response_anlys ("NX Response Analysis")
.
- activate(boolean) - Method in interface nxopen.features.PartModule
-
Indicates whether the part module is to be activated.
- activate() - Method in interface nxopen.geometricutilities.PartModuleOutputBuilder
-
- activate(TransformerData.ObjectType) - Method in interface nxopen.geometricutilities.TransformerData
-
Sets a component of the tool to be active.
- activate() - Method in interface nxopen.layout2d.Component
-
Activates the component.
- activate(boolean) - Method in interface nxopen.motion.FlexBody
-
Sets activate or deactivate status for all normal modes
License requirements: mechanisms ("MECHANISMS")
.
- activate() - Method in interface nxopen.SelectionSubscriber
-
Activate the subscriber so that it will receive selection change notifications.
- activate() - Method in interface nxopen.sim.Breakpoint
-
Activate the breakpoint.
- activate(Sketch.ViewReorient) - Method in interface nxopen.Sketch
-
Activates the sketch
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- activate(StylerEvent) - Method in interface nxopen.uistyler.ButtonLayout.Activate
-
Called when a dialog user clicks on a push button or presses the spacebar when a push
button has keyboard focus.
- activate(StylerEvent) - Method in interface nxopen.uistyler.IntegerItem.Activate
-
Called when a dialog user enters a valid integer value and presses Return
License requirements: None.
- activate(StylerEvent) - Method in interface nxopen.uistyler.MultiSelectList.Activate
-
License requirements: None.
- activate(StylerEvent) - Method in interface nxopen.uistyler.OptionMenu.Activate
-
Called when a dialog user selects an option from the menu.
- activate(StylerEvent) - Method in interface nxopen.uistyler.OptionToggle.Activate
-
Called when a dialog user selects an option from the menu
License requirements: None.
- activate(StylerEvent) - Method in interface nxopen.uistyler.PushButton.Activate
-
Called when a dialog user clicks on the push button or presses the spacebar when the push button has
keyboard focus.
- activate(StylerEvent) - Method in interface nxopen.uistyler.RealItem.Activate
-
Called when a dialog user enters a valid real value and presses Return.
- activate(StylerEvent) - Method in interface nxopen.uistyler.SelectionBox.Activate
-
Called when a dialog user selects a list entry with a single mouse click, presses the spacebar on a selected list entry, or presses Return when the cursor is in the text field.
- activate(StylerEvent) - Method in interface nxopen.uistyler.SingleSelectList.Activate
-
Called when a dialog user selects an entry with a single mouse click
or presses the spacebar on an already selected item.
- activate(StylerEvent) - Method in interface nxopen.uistyler.StringItem.Activate
-
Called when a dialog user enters a character string and presses Return.
- activate(StylerEvent) - Method in interface nxopen.uistyler.ToolPalette.Activate
-
Called when a dialog user selects a button in the tool palette.
- activate(StylerEvent) - Method in interface nxopen.uistyler.WideString.Activate
-
Called when a dialog user enters a character string and presses Return.
- ACTIVATE_REASON - Static variable in class nxopen.uistyler.StylerEvent.Reason
-
Activate reason
- activateAllBreakpoints() - Method in interface nxopen.sim.NcProgramManagerBuilder
-
Activate all deactivated breakpoints.
- activateBaseline() - Method in interface nxopen.annotations.OrdinateBaselineBuilder
-
Returns the activate baseline
License requirements: None.
- activateBreakpoint(NcProgram, int) - Method in interface nxopen.sim.NcProgramManagerBuilder
-
Activate a breakpoint in a program line.
- activateCapturedView() - Method in interface nxopen.cam.WorkInstructionBuilder
-
Activate the captured view for a view item
License requirements: None.
- activateCurrentVisualReport() - Method in interface nxopen.visualreporting.VisualReportManager
-
- activatedPage() - Method in interface nxopen.uistyler.PageSwitchData
-
Returns the activated page
License requirements: None.
- activateFeatureGroupWithRollback() - Method in interface nxopen.preferences.SessionModeling
-
Returns the flag to activate the feature group with rollback or not, if the flag is true, the highest member feature will be made as current feature
License requirements: None.
- activateFile(File) - Method in interface nxopen.markup.MarkupFileCollection
-
Activates a
File
License requirements: None.
- activateForSketching() - Method in interface nxopen.drawings.DraftingView
-
Sets this drafting view as the active sketch view.
- activateForSketching() - Method in interface nxopen.drawings.DrawingSheet
-
Sets this drawingsheet's view as the active sketch view.
- activateGrid(UFDisp.GridContext) - Method in interface nxopen.uf.UFDisp
-
- activateInIsolation() - Method in interface nxopen.layout2d.Component
-
Activates the component while in edit in isolation task environment and
returns component internal sketch
License requirements: nx_layout ("NX Layout")
.
- activatePartModule() - Method in interface nxopen.features.PartModuleBuilder
-
Returns the option indicating whether part module is to be activated.
- activatePerpendicular() - Method in interface nxopen.annotations.OrdinateBaselineBuilder
-
Returns the activate perpendicular
License requirements: None.
- activatePlantModel(ModelPlantRoot, boolean) - Method in interface nxopen.linedesigner.ModelPlantManager
-
Activate Plant Model
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- activatePositioningGroup(PositioningGroup) - Method in interface nxopen.assemblies.PositioningTask
-
- activateSequence(Tag) - Method in interface nxopen.uf.UFAssem
-
- activateSolution() - Method in interface nxopen.cae.optimization.DAOSolution
-
Activates the optimization solution setup
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- activateTool(UFVariant, String) - Method in interface nxopen.uf.UFSim
-
- activateView() - Method in interface nxopen.cam.InspectionGraphicalReportBuilder
-
Activate the specified view.
- activateVolFilterToggle() - Method in interface nxopen.tooldesigner.SelectWeldsBuilder
-
Returns the activate vol filter toggle
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- ACTIVE - Static variable in class nxopen.ame.CabinetRoot.CabinetState
-
- ACTIVE - Static variable in class nxopen.cae.DurabilityResultsReportBuilder.UseEventsEnum
-
- active() - Method in interface nxopen.cae.LaminateDynamicSimCollection
-
Returns the active laminate dynamic sim
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- active() - Method in interface nxopen.cae.responsesimulation.NormalMode
-
Returns the activate status
License requirements: nx_response_anlys ("NX Response Analysis")
.
- ACTIVE - Static variable in class nxopen.cam.TurnAvoidancePathPointsBuilder.PointStatus
-
Point Status: Active
- ACTIVE - Static variable in class nxopen.ConvertToFromReferenceBuilder.OutputType
-
Outputs become active objects.
- ACTIVE - Static variable in class nxopen.drawings.ViewProjectionBuilder.CurveType
-
Active
- active() - Method in interface nxopen.ExpressionGroupCollection
-
Returns the active expression group
License requirements: None.
- active() - Method in interface nxopen.features.vehicledesign.BaseDataLoadingBuilder
-
Returns the status to indicate whether the loading is active or not.
- active() - Method in interface nxopen.features.vehicledesign.BaseDataPassengerBuilder
-
Returns the status to indicate whether the passenger is active or not.
- active() - Method in interface nxopen.motion.NormalModeProperty
-
Returns the activate status for each normal mode
License requirements: mechanisms ("MECHANISMS")
.
- active() - Method in interface nxopen.ObjectGeneralPropertiesBuilder
-
Returns the active.
- active() - Method in interface nxopen.report.CommandBuilder
-
Returns a value that indicates whether the command is active or not.
- ACTIVE - Static variable in class nxopen.routing.SplinePathBuilder.DragMode
-
The drag network is active
- ACTIVE - Static variable in class nxopen.sim.KinematicSinumerikCaBuilder.PlcInitStateTypes
-
Active
- ACTIVE - Static variable in class nxopen.uf.UFSket.ReferenceStatus
-
- active() - Method in interface nxopen.weld.CharacteristicsValueBuilder
-
Returns the indication if the attribute is to be placed on the output. true indicates
the attribute will be placed on the output, false indicates the attribute will not
be placed on the output.
- ACTIVE_REACH - Static variable in class nxopen.HumanData.InverseKinematicsType
-
Indicate active reach type of inverse kinematics
- ACTIVE_VIEW - Static variable in class nxopen.uf.UFDraw.ViewStatus
-
- activeAll() - Method in interface nxopen.motion.PhysicsConversionBuilder
-
The active button.
- activeArrangement() - Method in interface nxopen.assemblies.ComponentAssembly
-
Returns
the currently active
Arrangement
for this ComponentAssembly
License requirements: assemblies ("ASSEMBLIES MODULE")
Created in NX3.0.0
- activeButton() - Method in interface nxopen.menubar.MenuButtonEvent
-
Returns the activated MenuButton.
- activeClassifier() - Method in interface nxopen.visualreporting.Rule
-
Returns the active
Classifier
in this
Rule
for a multiple properties report.
- activeConditionSequence() - Method in interface nxopen.cae.SimConditionSeqMgr
-
Returns the currently active Condition Sequence.
- activeDynamicSection() - Method in interface nxopen.ModelingView
-
Returns the active dynamic section object in the modeling view.
- activeEditSegmentType() - Method in interface nxopen.mechanicalrouting.EditPointBuilder
-
Returns the edit segment type setting
Allows you to specify the type of edit in edit segment motion.
- activeEvent() - Method in interface nxopen.cae.responsesimulation.Solution
-
Returns the active event
License requirements: nx_response_anlys ("NX Response Analysis")
.
- activeEventSolveOptions() - Method in interface nxopen.cae.DurabilitySolverBuilder
-
Returns the active event solve options.
- activeExciterConfig() - Method in interface nxopen.cae.PreTestExciterConfigCollection
-
Returns the pre-test active exciter configuration
License requirements: None.
- activeFront() - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder
-
Returns the value indicating if the front barrier is displayed.
- activeGroup() - Method in interface nxopen.features.FeatureCollection
-
Returns the active feature group.
- activegroupOption() - Method in interface nxopen.GroupBuilder
-
Returns the activegroup option is for sketch group as active group in Direct Sketch, Sketch Task Environment or in Drafting Sketch.
- activeHorizontalMargin() - Method in interface nxopen.annotations.BaseOrdinateDimensionBuilder
-
Returns the active horizontal margin(defined or inferred) where horizontal dimension will be automatically placed.
- activeLegendTablePosition() - Method in interface nxopen.cae.xyplot.LegendTableGroupStyle
-
Returns the active legend table position type
License requirements: None.
- activeMotionType() - Method in interface nxopen.mechanicalrouting.EditPointBuilder
-
Returns the motion type setting.
- activeNavigator(int) - Method in interface nxopen.shipdesign.NavigatorCollection
-
Actives ship navigator.
- activePage() - Method in interface nxopen.blockstyler.TabControl
-
Returns the ActivePage
License requirements: None.
- activeParameterGroupName() - Method in interface nxopen.motion.MechatronicsBuilder
-
Returns the active configuration parameters group name
License requirements: mechanisms ("MECHANISMS")
.
- activePart(Tag, int) - Method in interface nxopen.uf.UFModeling
-
- activeplane - Variable in class nxopen.display.DynamicSectionBuilder.ActivePlaneData
-
- ActivePlaneData() - Constructor for class nxopen.display.DynamicSectionBuilder.ActivePlaneData
-
- activePortVariableGroupName() - Method in interface nxopen.motion.MechatronicsBuilder
-
Returns the active port variable group name
License requirements: mechanisms ("MECHANISMS")
.
- activePostReport() - Method in interface nxopen.cae.LaminatePostReportCollection
-
Returns the active laminate post report
License requirements: nx_lam_composites ("Laminate Composites")
.
- activePretest() - Method in interface nxopen.cae.PreTestSolutionCollection
-
Returns the active pre-test
License requirements: None.
- activeRear() - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder
-
Returns the value indicating if the rear barrier is displayed.
- activeRegionEndFactor - Variable in class nxopen.cae.Post.AnimationStreamline
-
between 0.0 and 1.0
- activeRegionStartFactor - Variable in class nxopen.cae.Post.AnimationStreamline
-
between 0.0 and 1.0
- activeRowIndex() - Method in interface nxopen.features.shipdesign.QualifySketchBuilder
-
Returns the active row index.
- activeRun() - Method in interface nxopen.plas.PlasManager
-
Returns the active run
License requirements: None.
- activeSensorConfig() - Method in interface nxopen.cae.PreTestSensorConfigCollection
-
Returns the pre-test active sensor configuration
License requirements: None.
- activeSheet() - Method in interface nxopen.diagramming.DiagrammingManager
-
- activeSheet() - Method in interface nxopen.diagramming.SheetManager
-
Returns the active sheet
License requirements: None.
- activeSide() - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder
-
Returns the value indicating if the side barrier is displayed.
- activeSketch() - Method in interface nxopen.Session
-
Returns the active sketch
License requirements: None.
- activeSketchViewColor() - Method in interface nxopen.drawings.ViewWorkflowBuilder
-
Returns the active views border color
License requirements: None.
- activeSolution() - Method in interface nxopen.cae.CorrelSolutionCollection
-
Returns the active solution
License requirements: None.
- activeSolution() - Method in interface nxopen.cae.ModelUpdateSolutionCollection
-
Returns the active solution
License requirements: None.
- activeSolution() - Method in interface nxopen.cae.responsesimulation.SolutionCollection
-
Returns the active solution
License requirements: nx_response_anlys ("NX Response Analysis")
.
- activeSolution() - Method in interface nxopen.cae.SimSimulation
-
Returns the active solution
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- activeStatus() - Method in interface nxopen.cae.LaminateGlobalLayup
-
Returns the global layup active status
License requirements: nx_lam_composites ("Laminate Composites")
.
- activeStatus() - Method in interface nxopen.mechatronics.GanttOperationBuilder
-
Returns the active status
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- activeStep() - Method in interface nxopen.cae.SimSolution
-
Returns the active step
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- activeSubdivisionBodyFeature() - Method in interface nxopen.SubdivisionTaskEnvironment
-
Returns the active subdivision body feature.
- activeTabPage() - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
Returns the active tab page.
- activeTemplate() - Method in interface nxopen.cae.xyplot.BaseTemplateManager
-
- activetemplate - Variable in class nxopen.cam.FeatureProcessBuilder.TemplateData
-
the template used
- activeTransformType() - Method in interface nxopen.mechanicalrouting.TransformBlockBuilder
-
Returns the transform type setting.
- activeVerticalMargin() - Method in interface nxopen.annotations.BaseOrdinateDimensionBuilder
-
Returns the active vertical margin(defined or inferred) where horizontal dimension will be automatically placed.
- ActiveView - Class in nxopen.motion
-
Definitions of post articulation and spreadsheet run active view type
- activeView() - Method in interface nxopen.motion.ArticulationControl
-
Returns the active view
License requirements: mechanisms ("MECHANISMS")
.
- activeView() - Method in interface nxopen.motion.SpreadsheetRunControl
-
Returns the active view
License requirements: mechanisms ("MECHANISMS")
.
- activeViewColor() - Method in interface nxopen.preferences.PartDrafting
-
Returns the drafting active view color.
- activeZone() - Method in interface nxopen.features.vehicledesign.HeadImpactBuilder
-
Returns the activate exclusion zone flag for this head impact study.
- activityStatus() - Method in interface nxopen.cae.DurabilityEvent
-
Returns the activity status of the event.
- actLinkConditionButton() - Method in interface nxopen.cae.optimization.TBSShapeRestrictAreaBuilder
-
Returns the link condition
License requirements: None.
- ACTUAL - Static variable in class nxopen.cae.xyplot.DecimalFormat
-
Show decimal automatically
- ACTUAL - Static variable in class nxopen.cam.InspectionAlignmentAssistantBuilder.State
-
Actual feature state
- ACTUAL - Static variable in class nxopen.cam.InspectionAlignmentBuilder.SaveStates
-
Save Actual PCS
- ACTUAL - Static variable in class nxopen.cam.InspectionConstructedFeatureBuilder.AvailableStateType
-
Feature is an actual measured feature
- ACTUAL - Static variable in class nxopen.cam.InspectionConstructedFeatureBuilder.CurrentStateType
-
Feature is an actual measured feature
- ACTUAL - Static variable in class nxopen.cam.InspectionConstructedFeatureBuilder.SubFeat1StateType
-
Feature is an actual measured feature
- ACTUAL - Static variable in class nxopen.cam.InspectionConstructedFeatureBuilder.SubFeat2StateType
-
Feature is an actual measured feature
- ACTUAL_DRF - Static variable in class nxopen.cam.InspectionMeasDataBuilder.DisplayTransformTypes
-
Actual DRF
- ACTUAL_PCS - Static variable in class nxopen.cam.InspectionConstructedFeatureBuilder.DestPcsEnumType
-
Use a user specified actual PCS as the destination
- actualValue() - Method in interface nxopen.motion.ConfigurationFloatParameter
-
Returns the actual value
License requirements: mechanisms ("MECHANISMS")
.
- actualValue() - Method in interface nxopen.motion.ConfigurationIntegerParameter
-
Returns the actual value
License requirements: mechanisms ("MECHANISMS")
.
- actualValue() - Method in interface nxopen.motion.ConfigurationTextParameter
-
Returns the actual value
License requirements: mechanisms ("MECHANISMS")
.
- actuatorCurveProfile() - Method in interface nxopen.motion.SpringBuilder
-
Returns the actuator profile.
- actuatorForceExpression() - Method in interface nxopen.motion.SpringBuilder
-
Returns the actuator force expression
License requirements: None.
- actuatorFunction() - Method in interface nxopen.motion.SpringBuilder
-
Returns the actuator function tag.
- actuatorMomentExpression() - Method in interface nxopen.motion.SpringBuilder
-
Returns the actuator moment expression
License requirements: None.
- actuatorType() - Method in interface nxopen.motion.SpringBuilder
-
Returns the actuator spline type
License requirements: None.
- acutelyAngledWallsChecker() - Method in interface nxopen.features.AnalyzePocketBuilder
-
Returns the flag specifying whether to check acutely angled walls.
- AD - Static variable in class nxopen.cae.responsesimulation.RSEventSolverParameters.DdamCoefficientType
-
- ADAMS - Static variable in class nxopen.motion.MotionEnvironment.Solver
-
Motion solver Adams
- adamsFriction() - Method in interface nxopen.motion.JointFriction
-
Returns the joint adams friction
License requirements: mechanisms ("MECHANISMS")
.
- adamsParameters() - Method in interface nxopen.motion.BodyContactBuilder
-
Returns the 3D BodyContact's subobject (the adams parameters)
License requirements: None.
- adamsParameters() - Method in interface nxopen.motion.CurveContactBuilder
-
Returns the 2D CurveContact's subobject (the adams parameters)
License requirements: None.
- AdamsSolverProperty - Interface in nxopen.motion
-
- adamsSolverProperty() - Method in interface nxopen.motion.MotionSolutionBuilder
-
Returns the Adams Solver property
License requirements: None.
- adapter() - Method in interface nxopen.mechatronics.SignalMappingConnectionBuilder
-
Returns the signal adapter object.
- AdapterFormula - Interface in nxopen.mechatronics
-
Represents the Adapter Formula class.
- AdapterFormulaBuilder - Interface in nxopen.mechatronics
-
- AdapterFormulaCollection - Interface in nxopen.mechatronics
-
Represents a collection of Adapter Formula.
- adapterFormulas() - Method in interface nxopen.mechatronics.PhysicsManager
-
- adapterIdentify() - Method in interface nxopen.mechatronics.MATLABSignalConnectionBuilder
-
Returns the adapter object.
- adapterObject() - Method in interface nxopen.mechatronics.SHMSignalConnectionBuilder
-
Returns the adapter object.
- AdapterSignal - Interface in nxopen.mechatronics
-
Represents the Adapter Signal class.
- AdapterSignalBuilder - Interface in nxopen.mechatronics
-
- AdapterSignalCollection - Interface in nxopen.mechatronics
-
Represents a collection of Adapter Signal.
- adapterSignals() - Method in interface nxopen.mechatronics.PhysicsManager
-
- adapterTag() - Method in interface nxopen.mechatronics.SignalConnectionBuilder
-
Returns the adapter object.
- ADAPTIVE_ELEMENT_STRESS_ERROR - Static variable in class nxopen.cae.Result.Quantity
-
- ADAPTIVE_NODAL_MESH_REFINEMENT_LEVEL - Static variable in class nxopen.cae.Result.Quantity
-
- ADAPTIVE_ROUGHING - Static variable in class nxopen.cam.CutPatternBuilder.Types
-
Adaptive Roughing
- ADAPTIVE_ZIG - Static variable in class nxopen.cam.CutPatternBuilder.Types
-
Adaptive Zig
- adaptiveScaleLimits() - Method in interface nxopen.blockstyler.AngularDimension
-
Returns the AdaptiveScaleLimits.
- adaptiveScaleLimits() - Method in interface nxopen.blockstyler.DoubleBlock
-
Returns the AdaptiveScaleLimits
License requirements: None.
- adaptiveScaleLimits() - Method in interface nxopen.blockstyler.ExpressionBlock
-
Returns the AdaptiveScaleLimits.
- adaptiveScaleLimits() - Method in interface nxopen.blockstyler.IntegerBlock
-
Returns the AdaptiveScaleLimits
License requirements: None.
- adaptiveScaleLimits() - Method in interface nxopen.blockstyler.LinearDimension
-
Returns the AdaptiveScaleLimits.
- adaptiveScaleLimits() - Method in interface nxopen.blockstyler.OnPathDimension
-
Returns the AdaptiveScaleLimits.
- adaptiveScaleLimits() - Method in interface nxopen.blockstyler.RadiusDimension
-
Returns the AdaptiveScaleLimits.
- AdaptiveShell - Interface in nxopen.features
-
Represents a adaptive shell feature
To create or edit an instance of this class, use
AdaptiveShellBuilder
Created in NX6.0.0
- AdaptiveShellBuilder - Interface in nxopen.features
-
- adaptivity - Variable in class nxopen.uf.UFSf.AskElementData
-
- AdaptivityExclusionZone - Interface in nxopen.cae
-
- AdaptivityExclusionZoneBuilder - Interface in nxopen.cae
-
- AdaptivityExclusionZoneCollection - Interface in nxopen.cae
-
Represents a collection of correl meta solution.
- adaptivityExclusionZones() - Method in interface nxopen.cae.AdaptivityMetaSolution
-
Returns the CAE Adaptivity exclusion zone collection belonging to this sim part .
- AdaptivityMetaSolution - Interface in nxopen.cae
-
- AdaptivityMetaSolutionBuilder - Interface in nxopen.cae
-
- AdaptivityMetaSolutionCollection - Interface in nxopen.cae
-
Represents a collection of adaptivity meta solution.
- adaptivitySolutions() - Method in interface nxopen.cae.SimSimulation
-
Returns the CAE Adaptivity collection belonging to this sim part .
- add(String, String) - Method in interface nxopen.ame.ConfigureResultTableBuilder
-
The action to add properties
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- add(AMEBaseNode) - Method in interface nxopen.ame.SelectAMEBaseNodeList
-
Adds an object to the list
License requirements: None.
- add(AMEBaseNode[]) - Method in interface nxopen.ame.SelectAMEBaseNodeList
-
Adds a set of objects to the list
License requirements: None.
- add(SelectionMethod) - Method in interface nxopen.ame.SelectAMEBaseNodeList
-
Adds the objects from a SelectionMethod to the list
License requirements: None.
- add(AMEBaseNode, View, Point3d) - Method in interface nxopen.ame.SelectAMEBaseNodeList
-
Adds the object with the objects view and objects point
License requirements: None.
- add(Annotation) - Method in interface nxopen.annotations.SelectAnnotationList
-
Adds an object to the list
License requirements: None.
- add(Annotation[]) - Method in interface nxopen.annotations.SelectAnnotationList
-
Adds a set of objects to the list
License requirements: None.
- add(SelectionMethod) - Method in interface nxopen.annotations.SelectAnnotationList
-
Adds the objects from a SelectionMethod to the list
License requirements: None.
- add(Annotation, View, Point3d) - Method in interface nxopen.annotations.SelectAnnotationList
-
Adds the object with the objects view and objects point
License requirements: None.
- add(BaseCustomSymbol) - Method in interface nxopen.annotations.SelectBaseCustomSymbolList
-
Adds an object to the list
License requirements: None.
- add(BaseCustomSymbol[]) - Method in interface nxopen.annotations.SelectBaseCustomSymbolList
-
Adds a set of objects to the list
License requirements: None.
- add(SelectionMethod) - Method in interface nxopen.annotations.SelectBaseCustomSymbolList
-
Adds the objects from a SelectionMethod to the list
License requirements: None.
- add(BaseCustomSymbol, View, Point3d) - Method in interface nxopen.annotations.SelectBaseCustomSymbolList
-
Adds the object with the objects view and objects point
License requirements: None.
- add(OrdinateDimension) - Method in interface nxopen.annotations.SelectOrdinateDimensionList
-
Adds an object to the list
License requirements: None.
- add(OrdinateDimension[]) - Method in interface nxopen.annotations.SelectOrdinateDimensionList
-
Adds a set of objects to the list
License requirements: None.
- add(SelectionMethod) - Method in interface nxopen.annotations.SelectOrdinateDimensionList
-
Adds the objects from a SelectionMethod to the list
License requirements: None.
- add(OrdinateDimension, View, Point3d) - Method in interface nxopen.annotations.SelectOrdinateDimensionList
-
Adds the object with the objects view and objects point
License requirements: None.
- add(TableSection) - Method in interface nxopen.annotations.SelectTableSectionList
-
Adds an object to the list
License requirements: None.
- add(TableSection[]) - Method in interface nxopen.annotations.SelectTableSectionList
-
Adds a set of objects to the list
License requirements: None.
- add(SelectionMethod) - Method in interface nxopen.annotations.SelectTableSectionList
-
Adds the objects from a SelectionMethod to the list
License requirements: None.
- add(TableSection, View, Point3d) - Method in interface nxopen.annotations.SelectTableSectionList
-
Adds the object with the objects view and objects point
License requirements: None.
- add(Component) - Method in interface nxopen.assemblies.SelectComponentList
-
Adds an object to the list
License requirements: None.
- add(Component[]) - Method in interface nxopen.assemblies.SelectComponentList
-
Adds a set of objects to the list
License requirements: None.
- add(SelectionMethod) - Method in interface nxopen.assemblies.SelectComponentList
-
Adds the objects from a SelectionMethod to the list
License requirements: None.
- add(Component, View, Point3d) - Method in interface nxopen.assemblies.SelectComponentList
-
Adds the object with the objects view and objects point
License requirements: None.
- ADD - Static variable in class nxopen.cae.AfuMathOperation.MultiType
-
Adds AFU records
- add(MeshPoint) - Method in interface nxopen.cae.OrderedSelection
-
Adds a mesh point to the list
License requirements: None.
- add(Point) - Method in interface nxopen.cae.OrderedSelection
-
Adds a point to the list
License requirements: None.
- add(FENode) - Method in interface nxopen.cae.OrderedSelection
-
Adds a node to the list
License requirements: None.
- add(FEElement) - Method in interface nxopen.cae.OrderedSelection
-
Adds a element to the list
License requirements: None.
- add(CAEEdge, boolean) - Method in interface nxopen.cae.OrderedSelection
-
Adds a polygon edge to the list
License requirements: None.
- add(Line, boolean) - Method in interface nxopen.cae.OrderedSelection
-
Adds a line to the list
License requirements: None.
- add(Arc, boolean) - Method in interface nxopen.cae.OrderedSelection
-
Adds a arc to the list
License requirements: None.
- add(Conic, boolean) - Method in interface nxopen.cae.OrderedSelection
-
Adds a conic to the list
License requirements: None.
- add(Spline, boolean) - Method in interface nxopen.cae.OrderedSelection
-
Adds a spline to the list
License requirements: None.
- add(SelectionMethod) - Method in interface nxopen.cae.OrderedSelection
-
Adds objects contained in the method to the list
License requirements: None.
- add(CAEBody) - Method in interface nxopen.cae.SelectCAEBodyList
-
Adds an object to the list
License requirements: None.
- add(CAEBody[]) - Method in interface nxopen.cae.SelectCAEBodyList
-
Adds a set of objects to the list
License requirements: None.
- add(SelectionMethod) - Method in interface nxopen.cae.SelectCAEBodyList
-
Adds the objects from a SelectionMethod to the list
License requirements: None.
- add(CAEBody, View, Point3d) - Method in interface nxopen.cae.SelectCAEBodyList
-
Adds the object with the objects view and objects point
License requirements: None.
- add(CAEEdge) - Method in interface nxopen.cae.SelectCAEEdgeList
-
Adds an object to the list
License requirements: None.
- add(CAEEdge[]) - Method in interface nxopen.cae.SelectCAEEdgeList
-
Adds a set of objects to the list
License requirements: None.
- add(SelectionMethod) - Method in interface nxopen.cae.SelectCAEEdgeList
-
Adds the objects from a SelectionMethod to the list
License requirements: None.
- add(CAEEdge, View, Point3d) - Method in interface nxopen.cae.SelectCAEEdgeList
-
Adds the object with the objects view and objects point
License requirements: None.
- add(CAEFace) - Method in interface nxopen.cae.SelectCAEFaceList
-
Adds an object to the list
License requirements: None.
- add(CAEFace[]) - Method in interface nxopen.cae.SelectCAEFaceList
-
Adds a set of objects to the list
License requirements: None.
- add(SelectionMethod) - Method in interface nxopen.cae.SelectCAEFaceList
-
Adds the objects from a SelectionMethod to the list
License requirements: None.
- add(CAEFace, View, Point3d) - Method in interface nxopen.cae.SelectCAEFaceList
-
Adds the object with the objects view and objects point
License requirements: None.
- add(FEElemFace) - Method in interface nxopen.cae.SelectFEElemFaceList
-
Adds an object to the list
License requirements: None.
- add(FEElemFace[]) - Method in interface nxopen.cae.SelectFEElemFaceList
-
Adds a set of objects to the list
License requirements: None.
- add(SelectionMethod) - Method in interface nxopen.cae.SelectFEElemFaceList
-
Adds the objects from a SelectionMethod to the list
License requirements: None.
- add(FEElemFace, View, Point3d) - Method in interface nxopen.cae.SelectFEElemFaceList
-
Adds the object with the objects view and objects point
License requirements: None.
- add(FENode) - Method in interface nxopen.cae.SelectFENodeList
-
Adds an object to the list
License requirements: None.
- add(FENode[]) - Method in interface nxopen.cae.SelectFENodeList
-
Adds a set of objects to the list
License requirements: None.
- add(SelectionMethod) - Method in interface nxopen.cae.SelectFENodeList
-
Adds the objects from a SelectionMethod to the list
License requirements: None.
- add(FENode, View, Point3d) - Method in interface nxopen.cae.SelectFENodeList
-
Adds the object with the objects view and objects point
License requirements: None.
- add(Mesh) - Method in interface nxopen.cae.SelectMeshList
-
Adds an object to the list
License requirements: None.
- add(Mesh[]) - Method in interface nxopen.cae.SelectMeshList
-
Adds a set of objects to the list
License requirements: None.
- add(SelectionMethod) - Method in interface nxopen.cae.SelectMeshList
-
Adds the objects from a SelectionMethod to the list
License requirements: None.
- add(Mesh, View, Point3d) - Method in interface nxopen.cae.SelectMeshList
-
Adds the object with the objects view and objects point
License requirements: None.
- ADD - Static variable in class nxopen.cae.SimBcPlotContoursBuilder.ResolveOverlapType
-
- ADD - Static variable in class nxopen.cae.SimBcXyPlotBuilder.ResolveMultipleMatches
-
- add(SimConstraint) - Method in interface nxopen.cae.SimConstraintGroup
-
Adds a constraint to this group
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- add(SimLoad) - Method in interface nxopen.cae.SimLoadGroup
-
Adds a load to this group
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- add(SimSimulationObject) - Method in interface nxopen.cae.SimSimulationObjectGroup
-
Adds a simulation object to this group
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- add(int, double, double, double, double) - Method in interface nxopen.cam.HolderSectionBuilder
-
Add a new holder section item
License requirements: cam_base ("CAM BASE")
.
- add(int, String, double, double, double, int, int, int, int, int) - Method in interface nxopen.cam.MillingTrackpointBuilder
-
- add(int, String, int, double, double, double, int, int, int, int, int) - Method in interface nxopen.cam.MillingTrackpointBuilder
-
Add a new track point, the input name will be changed if it is not unique.
- add(int, int, double, int) - Method in interface nxopen.cam.MultipleStepoverBuilder
-
Add a new item
License requirements: cam_base ("CAM BASE")
.
- add(CAMFeature) - Method in interface nxopen.cam.SelectCAMFeatureList
-
Adds an object to the list
License requirements: None.
- add(CAMFeature[]) - Method in interface nxopen.cam.SelectCAMFeatureList
-
Adds a set of objects to the list
License requirements: None.
- add(SelectionMethod) - Method in interface nxopen.cam.SelectCAMFeatureList
-
Adds the objects from a SelectionMethod to the list
License requirements: None.
- add(CAMFeature, View, Point3d) - Method in interface nxopen.cam.SelectCAMFeatureList
-
Adds the object with the objects view and objects point
License requirements: None.
- add(int, double, double, double, double) - Method in interface nxopen.cam.StepParamsBuilder
-
Create a new step params item
License requirements: cam_base ("CAM BASE")
.
- add(int, int, double) - Method in interface nxopen.cam.TurnRoughVariableIncrementBuilder
-
Add a new item
License requirements: cam_base ("CAM BASE")
.
- add(int, double) - Method in interface nxopen.cam.TurnThreadFinishPassesBuilder
-
Create a new finish passes item.
- ADD - Static variable in class nxopen.drawings.AddRemoveBoxViewBuilder.ModeType
-
Add mode
- add(DraftingView) - Method in interface nxopen.drawings.SelectDraftingViewList
-
Adds an object to the list
License requirements: None.
- add(DraftingView[]) - Method in interface nxopen.drawings.SelectDraftingViewList
-
Adds a set of objects to the list
License requirements: None.
- add(SelectionMethod) - Method in interface nxopen.drawings.SelectDraftingViewList
-
Adds the objects from a SelectionMethod to the list
License requirements: None.
- add(DraftingView, View, Point3d) - Method in interface nxopen.drawings.SelectDraftingViewList
-
Adds the object with the objects view and objects point
License requirements: None.
- add(DrawingView) - Method in interface nxopen.drawings.SelectDrawingViewList
-
Adds an object to the list
License requirements: None.
- add(DrawingView[]) - Method in interface nxopen.drawings.SelectDrawingViewList
-
Adds a set of objects to the list
License requirements: None.
- add(SelectionMethod) - Method in interface nxopen.drawings.SelectDrawingViewList
-
Adds the objects from a SelectionMethod to the list
License requirements: None.
- add(DrawingView, View, Point3d) - Method in interface nxopen.drawings.SelectDrawingViewList
-
Adds the object with the objects view and objects point
License requirements: None.
- add(FacetedBody) - Method in interface nxopen.facet.SelectFacetedBodyList
-
Adds an object to the list
License requirements: None.
- add(FacetedBody[]) - Method in interface nxopen.facet.SelectFacetedBodyList
-
Adds a set of objects to the list
License requirements: None.
- add(SelectionMethod) - Method in interface nxopen.facet.SelectFacetedBodyList
-
Adds the objects from a SelectionMethod to the list
License requirements: None.
- add(FacetedBody, View, Point3d) - Method in interface nxopen.facet.SelectFacetedBodyList
-
Adds the object with the objects view and objects point
License requirements: None.
- ADD - Static variable in class nxopen.features.PasteFaceBuilder.PasteOptionType
-
each tool body will add to the target body.
- add(BodyFeature) - Method in interface nxopen.features.SelectBodyFeatureList
-
Adds an object to the list
License requirements: None.
- add(BodyFeature[]) - Method in interface nxopen.features.SelectBodyFeatureList
-
Adds a set of objects to the list
License requirements: None.
- add(SelectionMethod) - Method in interface nxopen.features.SelectBodyFeatureList
-
Adds the objects from a SelectionMethod to the list
License requirements: None.
- add(BodyFeature, View, Point3d) - Method in interface nxopen.features.SelectBodyFeatureList
-
Adds the object with the objects view and objects point
License requirements: None.
- add(DatumCsys) - Method in interface nxopen.features.SelectDatumCsysList
-
Adds an object to the list
License requirements: None.
- add(DatumCsys[]) - Method in interface nxopen.features.SelectDatumCsysList
-
Adds a set of objects to the list
License requirements: None.
- add(SelectionMethod) - Method in interface nxopen.features.SelectDatumCsysList
-
Adds the objects from a SelectionMethod to the list
License requirements: None.
- add(DatumCsys, View, Point3d) - Method in interface nxopen.features.SelectDatumCsysList
-
Adds the object with the objects view and objects point
License requirements: None.
- add(Feature) - Method in interface nxopen.features.SelectFeatureList
-
Adds an object to the list
License requirements: None.
- add(Feature[]) - Method in interface nxopen.features.SelectFeatureList
-
Adds a set of objects to the list
License requirements: None.
- add(SelectionMethod) - Method in interface nxopen.features.SelectFeatureList
-
Adds the objects from a SelectionMethod to the list
License requirements: None.
- add(Feature, View, Point3d) - Method in interface nxopen.features.SelectFeatureList
-
Adds the object with the objects view and objects point
License requirements: None.
- add(Component) - Method in interface nxopen.features.shipdesign.DeckListBuilder
-
Adds a deck to creation list
License requirements: nx_ship_drafting ("Ship Drafting")
.
- add(SubdivisionBody) - Method in interface nxopen.features.subdivision.SelectSubdivisionBodyList
-
Adds an object to the list
License requirements: None.
- add(SubdivisionBody[]) - Method in interface nxopen.features.subdivision.SelectSubdivisionBodyList
-
Adds a set of objects to the list
License requirements: None.
- add(SelectionMethod) - Method in interface nxopen.features.subdivision.SelectSubdivisionBodyList
-
Adds the objects from a SelectionMethod to the list
License requirements: None.
- add(SubdivisionBody, View, Point3d) - Method in interface nxopen.features.subdivision.SelectSubdivisionBodyList
-
Adds the object with the objects view and objects point
License requirements: None.
- ADD - Static variable in class nxopen.geometricutilities.PatternIncrementItem.OperationEnum
-
add the increment to the master value.
- add(Component) - Method in interface nxopen.layout2d.SelectComponentList
-
Adds an object to the list
License requirements: None.
- add(Component[]) - Method in interface nxopen.layout2d.SelectComponentList
-
Adds a set of objects to the list
License requirements: None.
- add(SelectionMethod) - Method in interface nxopen.layout2d.SelectComponentList
-
Adds the objects from a SelectionMethod to the list
License requirements: None.
- add(Component, View, Point3d) - Method in interface nxopen.layout2d.SelectComponentList
-
Adds the object with the objects view and objects point
License requirements: None.
- add(CollisionSensor) - Method in interface nxopen.mechatronics.SelectCollisionSensorList
-
Adds an object to the list
License requirements: None.
- add(CollisionSensor[]) - Method in interface nxopen.mechatronics.SelectCollisionSensorList
-
Adds a set of objects to the list
License requirements: None.
- add(SelectionMethod) - Method in interface nxopen.mechatronics.SelectCollisionSensorList
-
Adds the objects from a SelectionMethod to the list
License requirements: None.
- add(CollisionSensor, View, Point3d) - Method in interface nxopen.mechatronics.SelectCollisionSensorList
-
Adds the object with the objects view and objects point
License requirements: None.
- add(HydraulicCylinder) - Method in interface nxopen.mechatronics.SelectHydraulicCylinderList
-
Adds an object to the list
License requirements: None.
- add(HydraulicCylinder[]) - Method in interface nxopen.mechatronics.SelectHydraulicCylinderList
-
Adds a set of objects to the list
License requirements: None.
- add(SelectionMethod) - Method in interface nxopen.mechatronics.SelectHydraulicCylinderList
-
Adds the objects from a SelectionMethod to the list
License requirements: None.
- add(HydraulicCylinder, View, Point3d) - Method in interface nxopen.mechatronics.SelectHydraulicCylinderList
-
Adds the object with the objects view and objects point
License requirements: None.
- add(LogicObject) - Method in interface nxopen.mechatronics.SelectLogicObjectList
-
Adds an object to the list
License requirements: None.
- add(LogicObject[]) - Method in interface nxopen.mechatronics.SelectLogicObjectList
-
Adds a set of objects to the list
License requirements: None.
- add(SelectionMethod) - Method in interface nxopen.mechatronics.SelectLogicObjectList
-
Adds the objects from a SelectionMethod to the list
License requirements: None.
- add(LogicObject, View, Point3d) - Method in interface nxopen.mechatronics.SelectLogicObjectList
-
Adds the object with the objects view and objects point
License requirements: None.
- add(PneumaticCylinder) - Method in interface nxopen.mechatronics.SelectPneumaticCylinderList
-
Adds an object to the list
License requirements: None.
- add(PneumaticCylinder[]) - Method in interface nxopen.mechatronics.SelectPneumaticCylinderList
-
Adds a set of objects to the list
License requirements: None.
- add(SelectionMethod) - Method in interface nxopen.mechatronics.SelectPneumaticCylinderList
-
Adds the objects from a SelectionMethod to the list
License requirements: None.
- add(PneumaticCylinder, View, Point3d) - Method in interface nxopen.mechatronics.SelectPneumaticCylinderList
-
Adds the object with the objects view and objects point
License requirements: None.
- add(Body) - Method in interface nxopen.SelectBodyList
-
Adds an object to the list
License requirements: None.
- add(Body[]) - Method in interface nxopen.SelectBodyList
-
Adds a set of objects to the list
License requirements: None.
- add(SelectionMethod) - Method in interface nxopen.SelectBodyList
-
Adds the objects from a SelectionMethod to the list
License requirements: None.
- add(Body, View, Point3d) - Method in interface nxopen.SelectBodyList
-
Adds the object with the objects view and objects point
License requirements: None.
- add(CoordinateSystem) - Method in interface nxopen.SelectCoordinateSystemList
-
Adds an object to the list
License requirements: None.
- add(CoordinateSystem[]) - Method in interface nxopen.SelectCoordinateSystemList
-
Adds a set of objects to the list
License requirements: None.
- add(SelectionMethod) - Method in interface nxopen.SelectCoordinateSystemList
-
Adds the objects from a SelectionMethod to the list
License requirements: None.
- add(CoordinateSystem, View, Point3d) - Method in interface nxopen.SelectCoordinateSystemList
-
Adds the object with the objects view and objects point
License requirements: None.
- add(Curve) - Method in interface nxopen.SelectCurveList
-
Adds an object to the list
License requirements: None.
- add(Curve[]) - Method in interface nxopen.SelectCurveList
-
Adds a set of objects to the list
License requirements: None.
- add(SelectionMethod) - Method in interface nxopen.SelectCurveList
-
Adds the objects from a SelectionMethod to the list
License requirements: None.
- add(Curve, View, Point3d) - Method in interface nxopen.SelectCurveList
-
Adds the object with the objects view and objects point
License requirements: None.
- add(DatumPlane) - Method in interface nxopen.SelectDatumPlaneList
-
Adds an object to the list
License requirements: None.
- add(DatumPlane[]) - Method in interface nxopen.SelectDatumPlaneList
-
Adds a set of objects to the list
License requirements: None.
- add(SelectionMethod) - Method in interface nxopen.SelectDatumPlaneList
-
Adds the objects from a SelectionMethod to the list
License requirements: None.
- add(DatumPlane, View, Point3d) - Method in interface nxopen.SelectDatumPlaneList
-
Adds the object with the objects view and objects point
License requirements: None.
- add(DisplayableObject) - Method in interface nxopen.SelectDisplayableObjectList
-
Adds an object to the list
License requirements: None.
- add(DisplayableObject[]) - Method in interface nxopen.SelectDisplayableObjectList
-
Adds a set of objects to the list
License requirements: None.
- add(SelectionMethod) - Method in interface nxopen.SelectDisplayableObjectList
-
Adds the objects from a SelectionMethod to the list
License requirements: None.
- add(DisplayableObject, View, Point3d) - Method in interface nxopen.SelectDisplayableObjectList
-
Adds the object with the objects view and objects point
License requirements: None.
- add(Edge) - Method in interface nxopen.SelectEdgeList
-
Adds an object to the list
License requirements: None.
- add(Edge[]) - Method in interface nxopen.SelectEdgeList
-
Adds a set of objects to the list
License requirements: None.
- add(SelectionMethod) - Method in interface nxopen.SelectEdgeList
-
Adds the objects from a SelectionMethod to the list
License requirements: None.
- add(Edge, View, Point3d) - Method in interface nxopen.SelectEdgeList
-
Adds the object with the objects view and objects point
License requirements: None.
- add(Expression) - Method in interface nxopen.SelectExpressionList
-
Adds an object to the list
License requirements: None.
- add(Expression[]) - Method in interface nxopen.SelectExpressionList
-
Adds a set of objects to the list
License requirements: None.
- add(SelectionMethod) - Method in interface nxopen.SelectExpressionList
-
Adds the objects from a SelectionMethod to the list
License requirements: None.
- add(Expression, View, Point3d) - Method in interface nxopen.SelectExpressionList
-
Adds the object with the objects view and objects point
License requirements: None.
- add(Face) - Method in interface nxopen.SelectFaceList
-
Adds an object to the list
License requirements: None.
- add(Face[]) - Method in interface nxopen.SelectFaceList
-
Adds a set of objects to the list
License requirements: None.
- add(SelectionMethod) - Method in interface nxopen.SelectFaceList
-
Adds the objects from a SelectionMethod to the list
License requirements: None.
- add(Face, View, Point3d) - Method in interface nxopen.SelectFaceList
-
Adds the object with the objects view and objects point
License requirements: None.
- add(IBaseCurve) - Method in interface nxopen.SelectIBaseCurveList
-
Adds an object to the list
License requirements: None.
- add(IBaseCurve[]) - Method in interface nxopen.SelectIBaseCurveList
-
Adds a set of objects to the list
License requirements: None.
- add(SelectionMethod) - Method in interface nxopen.SelectIBaseCurveList
-
Adds the objects from a SelectionMethod to the list
License requirements: None.
- add(IBaseCurve, View, Point3d) - Method in interface nxopen.SelectIBaseCurveList
-
Adds the object with the objects view and objects point
License requirements: None.
- add(IBasePlane) - Method in interface nxopen.SelectIBasePlaneList
-
Adds an object to the list
License requirements: None.
- add(IBasePlane[]) - Method in interface nxopen.SelectIBasePlaneList
-
Adds a set of objects to the list
License requirements: None.
- add(SelectionMethod) - Method in interface nxopen.SelectIBasePlaneList
-
Adds the objects from a SelectionMethod to the list
License requirements: None.
- add(IBasePlane, View, Point3d) - Method in interface nxopen.SelectIBasePlaneList
-
Adds the object with the objects view and objects point
License requirements: None.
- add(ICurve) - Method in interface nxopen.SelectICurveList
-
Adds an object to the list
License requirements: None.
- add(ICurve[]) - Method in interface nxopen.SelectICurveList
-
Adds a set of objects to the list
License requirements: None.
- add(SelectionMethod) - Method in interface nxopen.SelectICurveList
-
Adds the objects from a SelectionMethod to the list
License requirements: None.
- add(ICurve, View, Point3d) - Method in interface nxopen.SelectICurveList
-
Adds the object with the objects view and objects point
License requirements: None.
- add(INXObject) - Method in interface nxopen.SelectINXObjectList
-
Adds an object to the list
License requirements: None.
- add(INXObject[]) - Method in interface nxopen.SelectINXObjectList
-
Adds a set of objects to the list
License requirements: None.
- add(SelectionMethod) - Method in interface nxopen.SelectINXObjectList
-
Adds the objects from a SelectionMethod to the list
License requirements: None.
- add(INXObject, View, Point3d) - Method in interface nxopen.SelectINXObjectList
-
Adds the object with the objects view and objects point
License requirements: None.
- add(IParameterizedSurface) - Method in interface nxopen.SelectIParameterizedSurfaceList
-
Adds an object to the list
License requirements: None.
- add(IParameterizedSurface[]) - Method in interface nxopen.SelectIParameterizedSurfaceList
-
Adds a set of objects to the list
License requirements: None.
- add(SelectionMethod) - Method in interface nxopen.SelectIParameterizedSurfaceList
-
Adds the objects from a SelectionMethod to the list
License requirements: None.
- add(IParameterizedSurface, View, Point3d) - Method in interface nxopen.SelectIParameterizedSurfaceList
-
Adds the object with the objects view and objects point
License requirements: None.
- add(ModelingView) - Method in interface nxopen.SelectModelingViewList
-
Adds an object to the list
License requirements: None.
- add(ModelingView[]) - Method in interface nxopen.SelectModelingViewList
-
Adds a set of objects to the list
License requirements: None.
- add(SelectionMethod) - Method in interface nxopen.SelectModelingViewList
-
Adds the objects from a SelectionMethod to the list
License requirements: None.
- add(ModelingView, View, Point3d) - Method in interface nxopen.SelectModelingViewList
-
Adds the object with the objects view and objects point
License requirements: None.
- add(NXObject) - Method in interface nxopen.SelectNXObjectList
-
Adds an object to the list
License requirements: None.
- add(NXObject[]) - Method in interface nxopen.SelectNXObjectList
-
Adds a set of objects to the list
License requirements: None.
- add(SelectionMethod) - Method in interface nxopen.SelectNXObjectList
-
Adds the objects from a SelectionMethod to the list
License requirements: None.
- add(NXObject, View, Point3d) - Method in interface nxopen.SelectNXObjectList
-
Adds the object with the objects view and objects point
License requirements: None.
- add(TaggedObject) - Method in interface nxopen.SelectObjectList
-
Adds an object to the list
License requirements: None.
- add(TaggedObject[]) - Method in interface nxopen.SelectObjectList
-
Adds a set of objects to the list
License requirements: None.
- add(SelectionMethod) - Method in interface nxopen.SelectObjectList
-
Adds the objects from a SelectionMethod to the list
License requirements: None.
- add(TaggedObject, View, Point3d) - Method in interface nxopen.SelectObjectList
-
Adds the object with the objects view and objects point
License requirements: None.
- add(Part) - Method in interface nxopen.SelectPartList
-
Adds an object to the list
License requirements: None.
- add(Part[]) - Method in interface nxopen.SelectPartList
-
Adds a set of objects to the list
License requirements: None.
- add(SelectionMethod) - Method in interface nxopen.SelectPartList
-
Adds the objects from a SelectionMethod to the list
License requirements: None.
- add(Part, View, Point3d) - Method in interface nxopen.SelectPartList
-
Adds the object with the objects view and objects point
License requirements: None.
- add(Point) - Method in interface nxopen.SelectPointList
-
Adds an object to the list
License requirements: None.
- add(Point[]) - Method in interface nxopen.SelectPointList
-
Adds a set of objects to the list
License requirements: None.
- add(SelectionMethod) - Method in interface nxopen.SelectPointList
-
Adds the objects from a SelectionMethod to the list
License requirements: None.
- add(Point, View, Point3d) - Method in interface nxopen.SelectPointList
-
Adds the object with the objects view and objects point
License requirements: None.
- add(Spline) - Method in interface nxopen.SelectSplineList
-
Adds an object to the list
License requirements: None.
- add(Spline[]) - Method in interface nxopen.SelectSplineList
-
Adds a set of objects to the list
License requirements: None.
- add(SelectionMethod) - Method in interface nxopen.SelectSplineList
-
Adds the objects from a SelectionMethod to the list
License requirements: None.
- add(Spline, View, Point3d) - Method in interface nxopen.SelectSplineList
-
Adds the object with the objects view and objects point
License requirements: None.
- add(TaggedObject) - Method in interface nxopen.SelectTaggedObjectList
-
Adds an object to the list
License requirements: None.
- add(TaggedObject[]) - Method in interface nxopen.SelectTaggedObjectList
-
Adds a set of objects to the list
License requirements: None.
- add(SelectionMethod) - Method in interface nxopen.SelectTaggedObjectList
-
Adds the objects from a SelectionMethod to the list
License requirements: None.
- add(TaggedObject, View, Point3d) - Method in interface nxopen.SelectTaggedObjectList
-
Adds the object with the objects view and objects point
License requirements: None.
- add(View) - Method in interface nxopen.SelectViewList
-
Adds an object to the list
License requirements: None.
- add(View[]) - Method in interface nxopen.SelectViewList
-
Adds a set of objects to the list
License requirements: None.
- add(SelectionMethod) - Method in interface nxopen.SelectViewList
-
Adds the objects from a SelectionMethod to the list
License requirements: None.
- add(View, View, Point3d) - Method in interface nxopen.SelectViewList
-
Adds the object with the objects view and objects point
License requirements: None.
- ADD - Static variable in class nxopen.tooling.AddReusablePart.ModeMethod
-
Add reusable component
- ADD - Static variable in class nxopen.tooling.EWDraftingBuilder.ModeOption
-
add drawing
- ADD - Static variable in class nxopen.tooling.FastenerAssy.HoleOperation
-
Click the add hole group menu
- ADD - Static variable in class nxopen.tooling.FastenerAssy.ModeMethod
-
Add fastener assembly
- ADD - Static variable in class nxopen.tooling.PocketBuilder.ModeType
-
do unite
- ADD - Static variable in class nxopen.tooling.ReusableObjectPasteBuilder.PasteMethods
-
Add
- add(double[], double[]) - Method in interface nxopen.uf.UFVec2
-
- add(double[], double[]) - Method in interface nxopen.uf.UFVec3
-
- add(String, NXObject[]) - Method in interface nxopen.Validation
-
Add a objects to the validation map
License requirements: None.
- add(String, String) - Method in interface nxopen.Validation
-
Add a text to the validation map
License requirements: None.
- add(String, double) - Method in interface nxopen.Validation
-
Add a real to the validation map
License requirements: None.
- add(String, int) - Method in interface nxopen.Validation
-
Add a integer to the validation map
License requirements: None.
- add(String, int, int) - Method in interface nxopen.Validation
-
Add a time to the validation map
License requirements: None.
- ADD - Static variable in class nxopen.visualreporting.VisualReportExplorer.ReportOnObjectsOption
-
Add to the existing set of objects
- add3dModel(String) - Method in interface nxopen.ame.Manage3DModelsBuilder
-
Assigns the given 3d model to the associated
ProductDefinition
License requirements: None.
- ADD_BLANK - Static variable in class nxopen.tooling.BlankLayoutBuilder.Types
-
the type of add multiple blank
- ADD_CHILDREN - Static variable in class nxopen.ame.ImportType
-
- ADD_DOF_VALUES - Static variable in class nxopen.cae.ConflictResolutionBuilder.Rule
-
add dof values on the intersection
- ADD_DOF_VALUES - Static variable in class nxopen.cae.ConstraintResolutionBuilder.Rule
-
Deprecated.
add dof values on the intersection
- ADD_FUNCTION - Static variable in class nxopen.ame.ImportType
-
- ADD_INSERT - Static variable in class nxopen.tooling.ShimBuilder.Types
-
- ADD_INSTANCE - Static variable in class nxopen.tooling.MoldFillingBuilder.InstallOption
-
Instance
- ADD_INSTANCE - Static variable in class nxopen.tooling.StandardPartBuilder.EditType
-
- ADD_INTO_DIAMETERS - Static variable in class nxopen.cam.CutParametersFilletsTypes
-
Fillets mode: Add into Diameters
- ADD_INTO_FACES - Static variable in class nxopen.cam.CutParametersFilletsTypes
-
Fillets mode: Add into Faces
- ADD_INTO_LIST - Static variable in class nxopen.tooling.PiercingInsertBuilder.AssociationToolType
-
The operation option is add into list
- ADD_KINEMATIC_MODEL - Static variable in class nxopen.tooling.MotionSimulationBuilder.Types
-
Adds kinematic model
- ADD_MATERIAL - Static variable in class nxopen.tooling.InsertAuxiliaryBuilder.RampStepsType
-
- ADD_MATERIAL - Static variable in class nxopen.tooling.PocketBuilder.RsetType
-
add material
- ADD_NOTE - Static variable in class nxopen.routing.CustomManager.DuctSizeCalculatorDisplayNoteFlag
-
- ADD_PREFIX - Static variable in class nxopen.InterpartExpressionsBuilder.NamingRules
-
- ADD_PREFIX - Static variable in class nxopen.motion.MechanismImport.NamingRule
-
Adds a prefix string to imported object's name
- add_stock_ret_stock(CharacteristicList, CharacteristicList, ISegment[], String) - Method in interface nxopen.routing.StockCollection
-
Creates stock
Stock
on the given segments.
- ADD_SUFFIX - Static variable in class nxopen.InterpartExpressionsBuilder.NamingRules
-
- ADD_SUFFIX - Static variable in class nxopen.motion.MechanismImport.NamingRule
-
Adds a suffix string to imported object's name
- ADD_TO_EXISTING - Static variable in class nxopen.cae.PolygonFaceOnMeshBuilder.SelectBodyMethod
-
Add to existing body
- ADD_TO_GROUP - Static variable in class nxopen.GroupBuilder.Action
-
Add members to existing group in Modeling
- ADD_TO_TOOL_RADIUS - Static variable in class nxopen.cam.TurnConcaveCornerControl.RadiusOptions
-
Concave Corner Control radius option is Add to Tool Radius.
- ADD_TYPE - Static variable in class nxopen.ame.ImportType
-
- ADD_WITH_TRANSFORMS - Static variable in class nxopen.preferences.SessionPdm.SynchroniseOnLoadType
-
- addAccessKey(AttributeTemplatesBuilder.AccessKey) - Method in interface nxopen.AttributeTemplatesBuilder
-
Add a new access key to the list of access keys.
- addAcrossObject(DisplayableObject) - Method in interface nxopen.features.shipdesign.StandardPartItemBuilder
-
Adds the specific object to the across object list.
- addActivateHandler(ButtonLayout.Activate, boolean) - Method in interface nxopen.uistyler.ButtonLayout
-
Registers activate callback.
- addActivateHandler(IntegerItem.Activate, boolean) - Method in interface nxopen.uistyler.IntegerItem
-
Registers activate callback.
- addActivateHandler(MultiSelectList.Activate, boolean) - Method in interface nxopen.uistyler.MultiSelectList
-
Called when a dialog user selects an entry with a double mouse click or presses Return on
a selected item.
- addActivateHandler(OptionMenu.Activate, boolean) - Method in interface nxopen.uistyler.OptionMenu
-
Registers activate callback.
- addActivateHandler(OptionToggle.Activate, boolean) - Method in interface nxopen.uistyler.OptionToggle
-
Registers activate callback.
- addActivateHandler(PushButton.Activate, boolean) - Method in interface nxopen.uistyler.PushButton
-
Registers activate callback.
- addActivateHandler(RealItem.Activate, boolean) - Method in interface nxopen.uistyler.RealItem
-
Registers activate callback.
- addActivateHandler(SelectionBox.Activate, boolean) - Method in interface nxopen.uistyler.SelectionBox
-
Registers activate callback.
- addActivateHandler(SingleSelectList.Activate, boolean) - Method in interface nxopen.uistyler.SingleSelectList
-
Registers activate callback.
- addActivateHandler(StringItem.Activate, boolean) - Method in interface nxopen.uistyler.StringItem
-
Registers activate callback.
- addActivateHandler(ToolPalette.Activate, boolean) - Method in interface nxopen.uistyler.ToolPalette
-
Registers activate callback.
- addActivateHandler(WideString.Activate, boolean) - Method in interface nxopen.uistyler.WideString
-
Registers activate callback.
- addAdditionalPillarFeature(HeadImpactOPillar) - Method in interface nxopen.features.vehicledesign.HeadImpactBuilder
-
The method to add an additional pillar feature.
- addAdditionalRailFeature(HeadImpactOtherRail) - Method in interface nxopen.features.vehicledesign.HeadImpactBuilder
-
The method to add an additional side rail feature.
- addAdjacentStructure(Body) - Method in interface nxopen.features.shipdesign.PenetrationAssociationBuilder
-
Adds adjacent structures
License requirements: nx_penetration_mgmt ("Penetration Management")
.
- addAdjacentStructure(Body) - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder
-
Adds adjacent structures
License requirements: nx_penetration_mgmt ("Penetration Management")
.
- addAll() - Method in interface nxopen.geometricutilities.ConvertFeatureGroupsToModulesBuilder
-
Add all feature groups into convertible set
License requirements: None.
- addAllChildrenToSubset(Component[]) - Method in interface nxopen.assemblies.Subset
-
Adds all the child components of the selected Reuse Design Element to the owning subset.
- addAllForcesAndMoments() - Method in interface nxopen.cae.NodalForceReportBuilder
-
Returns the add all forces and moments
License requirements: None.
- addAllSubordinates() - Method in interface nxopen.assemblies.SubsetBuilder
-
Returns the value which determines whether the subset will include all the subordinates of reuse design elements.
- addAnnotationOfBracket(boolean, DraftingBody) - Method in interface nxopen.features.shipdesign.InteractiveAnnotationBuilder
-
Add annotation of bracket
License requirements: nx_ship_drafting ("Ship Drafting") OR nx_ship_gen_arrange ("Ship General Arrangement")
.
- addAnnotationOfEndCuts(boolean, DraftingBody) - Method in interface nxopen.features.shipdesign.InteractiveAnnotationBuilder
-
Add annotation of end cuts.
- addAnnotationOfExpansionPlate(DraftingView, NXObject, boolean) - Method in interface nxopen.features.shipdesign.InteractiveAnnotationBuilder
-
Add annotation of expansion plate
License requirements: nx_ship_drafting ("Ship Drafting") OR nx_ship_gen_arrange ("Ship General Arrangement")
.
- addAnnotationOfExpansionStiffenerEndCuts(DraftingView, NXObject, boolean) - Method in interface nxopen.features.shipdesign.InteractiveAnnotationBuilder
-
Add annotation of expansion stiffener endcuts
License requirements: nx_ship_drafting ("Ship Drafting") OR nx_ship_gen_arrange ("Ship General Arrangement")
.
- addAnnotationOfExpansionStiffenerSturctureIdAndScantling(DraftingView, NXObject, boolean, boolean) - Method in interface nxopen.features.shipdesign.InteractiveAnnotationBuilder
-
Add annotation of structure ID and scantling on Ship Expansion View
License requirements: nx_ship_drafting ("Ship Drafting") OR nx_ship_gen_arrange ("Ship General Arrangement")
.
- addAnnotationOfOpeningFillingLine(boolean, DraftingBody) - Method in interface nxopen.features.shipdesign.InteractiveAnnotationBuilder
-
Add annotation of opening filling line
License requirements: nx_ship_drafting ("Ship Drafting") OR nx_ship_gen_arrange ("Ship General Arrangement")
.
- addAnnotationOfSeamForDetailDesign(boolean, DraftingView, DraftingBody[], DraftingBody) - Method in interface nxopen.features.shipdesign.InteractiveAnnotationBuilder
-
Add annotation of seam symbol for detail design
License requirements: nx_ship_drafting ("Ship Drafting") OR nx_ship_gen_arrange ("Ship General Arrangement")
.
- addAnnotationOfStructureIdAndScantling(boolean, boolean, DraftingBody) - Method in interface nxopen.features.shipdesign.InteractiveAnnotationBuilder
-
Add annotations of sturcture ID And scantling.
- addApplicationData(IApplicationData) - Method in interface nxopen.fields.Field
-
Adds the specified application data object to the field
NOTE: Only one application data object per IApplication can be added
and the data must be owned by an IApplication with the same Part::Field::Main
as the field.
- addApplyHandler(BlockDialog.Apply) - Method in interface nxopen.blockstyler.BlockDialog
-
Adds Apply callback handler to the dialog.
- addApplyHandler(DialogItem.Apply, boolean) - Method in interface nxopen.uistyler.DialogItem
-
Registers apply callback.
- addArgument(BaseArgument.Type) - Method in interface nxopen.report.CommandBuilder
-
Adds an argument and adds it to the command.
- addAssembly(String) - Method in interface nxopen.tooling.CloneObject
-
Adds the part/assembly to be cloned.
- addAssembly(Part) - Method in interface nxopen.tooling.CloneObject
-
Adds the part/assembly to be cloned.
- addAssembly(String) - Method in interface nxopen.uf.UFClone
-
- AddAssemblyData() - Constructor for class nxopen.uf.UFClone.AddAssemblyData
-
- AddAssemblyReturn - Variable in class nxopen.uf.UFClone.AddAssemblyData
-
- addAssertedMassToChosenAttributes(String, int) - Method in interface nxopen.partfamily.TemplateManager
-
Adds new attribute of type asserted mass to chosen attributes list of a part family
License requirements: adv_assemblies ("ADVANCED ASSEMBLIES"), solid_modeling ("SOLIDS MODELING")
.
- addAssignedSymbol(String) - Method in interface nxopen.ame.Manage2dSymbolsBuilder
-
Adds the given 2d symbol to the assigned symbols list
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- addAssociatedObject(NXObject) - Method in interface nxopen.tooling.SpreadsheetData
-
Add object to be updated according to the spreadsheet data
License requirements: None.
- addAssociatedPart(String, ToolingCloneparttype) - Method in interface nxopen.tooling.CloneObject
-
Adds other part (FEM, SIM part etc.) to be cloned
License requirements: None.
- addAssortpartToAnn(Tag, int, Tag[]) - Method in interface nxopen.uf.UFDrf
-
- addAttachment(IssueAttachment) - Method in interface nxopen.issue.IssueContent
-
Adds an
IssueAttachment
License requirements: nx_issue_mgmt ("NX Issue Tracking")
Created in NX8.5.0
- addAttachment(IssueAttachment) - Method in interface nxopen.issue.IssueContentBuilder
-
Adds an
IssueAttachment
License requirements: nx_issue_mgmt ("NX Issue Tracking")
Created in NX8.5.0
- addAttachment(IssueAttachment) - Method in interface nxopen.issue.IssueFolder
-
Adds an
IssueAttachment
License requirements: nx_issue_mgmt ("NX Issue Tracking")
Created in NX8.5.0
- addAttentionPointHandler(UserDefinedClass.DisplayCallback) - Method in interface nxopen.userdefinedobjects.UserDefinedClass
-
Registers the attention point callback.
- addAttribute(String, CAMAttribute.ValueType) - Method in interface nxopen.cam.CAMAttributeCollection
-
Add an attribute
License requirements: cam_base ("CAM BASE")
.
- addAttributeEditHandler(LinkedPartManager.AttributeEditHandler) - Method in interface nxopen.LinkedPartManager
-
Registers a user defined attribute edit method that is called whenever a linked mirror part is created or updated from source
License requirements: None.
- addAttributeReference(NXObject, String, boolean, int, int) - Method in interface nxopen.annotations.TextWithSymbolsBuilder
-
Adds an attribute reference
License requirements: drafting ("DRAFTING")
.
- addAutoRefinementConstraint(CfdAutoRefinementConstraint) - Method in interface nxopen.cae.FluidDomainRecipe
-
Adds a
CfdAutoRefinementConstraint
constraint
License requirements: nx_adv_fld_mod_solv ("NX Advanced Fluid Modeling - Full") OR sc_acou_meshing (" SC Acoustic Meshing")
Created in NX11.0.0
- addAuxiliaryView(Tag, Tag, Tag, double[]) - Method in interface nxopen.uf.UFDraw
-
- addBackHandler(DialogItem.Back, boolean) - Method in interface nxopen.uistyler.DialogItem
-
Registers back callback.
- addBc(SimBC) - Method in interface nxopen.cae.SimLbcFolder
-
Add a child folder
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- addBc(SimBC, SimSolution, SimSolutionStep) - Method in interface nxopen.cae.SimSimulation
-
Adds the boundary condition to the step in the solution passed.
- addBc(SimBC) - Method in interface nxopen.cae.SimSolution
-
Add the bc to the solution
Only the BC that not under the folder can be added to solution
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- addBc(SimBC) - Method in interface nxopen.cae.SimSolutionStep
-
Add the bc to the step
Only the BC that not under the folder can be added to solution
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- addBc(SimSolution, SimBC) - Method in interface nxopen.cae.SolutionManager
-
Add bc to a solution
License requirements: nx_masterfem ("Finite Element Modeling")
.
- addBc(SimSolutionStep, SimBC) - Method in interface nxopen.cae.StepManager
-
Add bc to a step
License requirements: nx_masterfem ("Finite Element Modeling")
.
- addBeamStrFillets - Variable in class nxopen.cae.Result.ResultParameters
-
Deprecated.
- addBits(String, int) - Method in interface nxopen.DataContainer
-
Adds the bits value in the container.
- addBomData(Component[], String[]) - Method in interface nxopen.tooling.BomListBuilder
-
Adds a new record into BOM list.
- addBoolParameter(String, boolean, boolean, boolean) - Method in interface nxopen.mechatronics.ParameterStockBuilder
-
Adds Bool parameter.
- addBreakpoint(int) - Method in interface nxopen.sim.NcProgram
-
- addBreakpoint(NcProgram, int) - Method in interface nxopen.sim.NcProgramManagerBuilder
-
Add a breakpoint to a program line.
- addBusinessModifiers(BusinessModifier[]) - Method in interface nxopen.annotations.IPmi
-
Adds the business modifiers.
- addBusinessProcessModifier(Tag, String) - Method in interface nxopen.uf.UFPd
-
- addByUpperDiameter(int, double, double, double, double) - Method in interface nxopen.cam.HolderSectionBuilder
-
Add a new holder section item by upper diameter
License requirements: cam_base ("CAM BASE")
.
- addCadFeatureAttributes() - Method in interface nxopen.cam.FeatureRecognitionBuilder
-
Returns the flag indicating whether features will get attributes added of enclosed modeling features
License requirements: None.
- addCAENonMastersToImport() - Method in interface nxopen.pdm.PartOperationImportBuilder
-
Returns the add non master to import
License requirements: None.
- addCallback(ListBox) - Method in interface nxopen.blockstyler.ListBox.AddCallback
-
Add callback
License requirements: None.
- addCallback(SetList) - Method in interface nxopen.blockstyler.SetList.AddCallback
-
Add callback
License requirements: None.
- addCallback(CustomManager.CallbackReason, CustomManager.Callback) - Method in interface nxopen.routing.CustomManager
-
Adds the callback with the given reason.
- addCamDiskToMasterAxis(boolean) - Method in interface nxopen.mechatronics.CamBuilder
-
Add cam disk to master axis by ja
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- addCamDiskToMasterJointOption() - Method in interface nxopen.mechatronics.CamBuilder
-
Returns the add cam disk to master joint option.
- addCancelHandler(BlockDialog.Cancel) - Method in interface nxopen.blockstyler.BlockDialog
-
Adds Cancel callback handler to the dialog.
- addCancelHandler(DialogItem.Cancel, boolean) - Method in interface nxopen.uistyler.DialogItem
-
Registers cancel callback.
- addCellData(int[]) - Method in interface nxopen.openxml.TableDocumentData
-
- addCenterPasses() - Method in interface nxopen.cam.AreaMillingNonSteepContainment
-
Returns the add center passes flag
License requirements: None.
- addCenterPasses() - Method in interface nxopen.cam.FlowCutSteepContainment
-
Returns the add center passes flag
License requirements: None.
- addChainBetweenIntersectionPoints(SelectionIntentRule[], NXObject, Point3d, NXObject, Point3d, NXObject, Point3d, Section.Mode, boolean) - Method in interface nxopen.Section
-
Adds a chain between given two intersection points to the section.
- addChainset(ScCollector, String) - Method in interface nxopen.features.EdgeBlendBuilder
-
Add an edge blend chainset to the edge blend
License requirements: solid_modeling ("SOLIDS MODELING")
.
- addChainset(ScCollector, EdgeBlendBuilder.Section, EdgeBlendBuilder.Conic, EdgeBlendBuilder.Rhotype, String, String, String) - Method in interface nxopen.features.EdgeBlendBuilder
-
Add an edge blend chainset to the edge blend
License requirements: solid_modeling ("SOLIDS MODELING")
.
- addChamfer() - Method in interface nxopen.features.CurveFinderBuilder
-
Adds chamfer relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- addChannel(String) - Method in interface nxopen.sim.KinematicConfigurator
-
Adds a new user channel name to the list of channels
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- addChannelName(String) - Method in interface nxopen.sim.KinematicComponentBuilder
-
Adds a channel name to the component
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- addCharacteristicsInheritaceInformation() - Method in interface nxopen.weld.WeldJointBuilder
-
Add welding characteristics inheritance information.
- addCheckedAttribute(String, NXObject) - Method in interface nxopen.ame.SymbolAnnotationBuilder
-
Add the checked attribute.
- addChild(String, TaggedObject[], boolean) - Method in interface nxopen.shipdesign.NavigatorNode
-
Adds a child node.
- addChildToCondition(Condition, Condition) - Method in interface nxopen.visualreporting.VisualReportBuilder
-
- addCircDetailView(Tag, Tag, Tag, Tag, double, double[]) - Method in interface nxopen.uf.UFDraw
-
- addCircularMotion(PathCircularMotion, CamPathToolpathEventLocation, PathEvent) - Method in interface nxopen.cam.Path
-
Add a circular move at location, if location is end location(append)
then the reference is not relevant
License requirements: None.
- addClonePartName(String) - Method in interface nxopen.tooling.AddReusablePart
-
Adds clone part name
License requirements: None.
- addCloseHandler(BlockDialog.Close) - Method in interface nxopen.blockstyler.BlockDialog
-
Adds Close callback handler to the dialog.
- addCoincident() - Method in interface nxopen.features.CurveFinderBuilder
-
Adds coincident vertex relations of the last vertexes added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- addCoincident2dComponent() - Method in interface nxopen.features.CurveFinderBuilder
-
Adds coincident 2d component relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- addCoincidentSketchGroup() - Method in interface nxopen.features.CurveFinderBuilder
-
Adds coincident sketch group relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- addColumn(Tag, Tag, int) - Method in interface nxopen.uf.UFTabnot
-
- addCompileUnitIndex(int) - Method in interface nxopen.ame.PlcMethodBuilder
-
Add a index of network that will be in a method
with this function is possible to add several network
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- addComponent(String, String, String, Point3d, Matrix3x3, int) - Method in interface nxopen.assemblies.ComponentAssembly
-
Creates a new
Component
in this assembly, based on an existing part file.
- addComponent(String, String, String, Point3d, Matrix3x3, int, boolean) - Method in interface nxopen.assemblies.ComponentAssembly
-
Creates a new
Component
in this assembly, based on an existing part file.
- addComponent(BasePart, String, String, Point3d, Matrix3x3, int) - Method in interface nxopen.assemblies.ComponentAssembly
-
Creates a new
Component
in this assembly, based on an existing part file.
- addComponent(Component, boolean) - Method in interface nxopen.assemblies.ComponentGroup
-
Adds a component to a component group.
- addComponent(String) - Method in interface nxopen.display.IrayPlusMaterialEditorBuilder
-
Adds a component to layers for specific layer type.
- addComponent(Component[]) - Method in interface nxopen.mechatronics.SystemObject
-
- addComponent(Component) - Method in interface nxopen.mfg.am.BuildTray
-
Adds a component (occurrence) to the build tray
License requirements: am_pb_cam_basic ("Basic NX Powder Bed Additive Manufacturing Application")
.
- addComponent(String) - Method in interface nxopen.pdm.PendingComponentsManager
-
Adds a pending component.
- addComponent(NXObject) - Method in interface nxopen.tooling.FastenerRemoveNodeBuilder
-
Adds component.
- AddComponentBuilder - Interface in nxopen.assemblies
-
Represents a builder class that performs add existing component operation in current context.
- AddComponentBuilder - Interface in nxopen.mechatronics
-
- AddComponentBuilder.InitialLocationAndOrientationData - Class in nxopen.assemblies
-
- AddComponentBuilder.LocationType - Class in nxopen.assemblies
-
Represents initial location type that can be present during add component
- AddComponentData() - Constructor for class nxopen.assemblies.ComponentAssembly.AddComponentData
-
- AddComponentData() - Constructor for class nxopen.display.IrayPlusMaterialEditorBuilder.AddComponentData
-
- AddComponentData() - Constructor for class nxopen.pdm.PendingComponentsManager.AddComponentData
-
- addComponentMode(AddReusablePart.ModeMethod) - Method in interface nxopen.tooling.AddReusablePart
-
Adds mode for a reusable component
License requirements: None.
- addComponentProperty(String, String, int) - Method in interface nxopen.tooling.AddReusablePart
-
Adds Component Properties
License requirements: None.
- addComponents(Part[], Point3d, Matrix3x3, int, String, int, boolean) - Method in interface nxopen.assemblies.ComponentAssembly
-
Creates new
Component
in this assembly, based on existing part files.
- addComponents(Component[]) - Method in interface nxopen.layout2d.ReparentComponentBuilder
-
Add a list of 2D Components
License requirements: None.
- addComponents() - Method in interface nxopen.ObjectGeneralPropertiesBuilder
-
Returns the add components.
- addComponentsExclusively() - Method in interface nxopen.tooling.ChangeoverManagementBuilder
-
Returns the exclusive adding
License requirements: None.
- addCompoundWeldSymbol(Tag, UFDrf.WeldSymInfo, UFDrf.WeldSymInfo) - Method in interface nxopen.uf.UFDrf
-
- addCompSheet(NXObject, String, String, String, String) - Method in interface nxopen.tooling.CompDrawingBuilder
-
Add a new sheet to a component.
- addConcentric() - Method in interface nxopen.features.CurveFinderBuilder
-
Adds concentric relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- addConcentric2dComponent() - Method in interface nxopen.features.CurveFinderBuilder
-
Adds concentric 2d component relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- addConcentricSketchGroup() - Method in interface nxopen.features.CurveFinderBuilder
-
Adds concentric sketch group relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- addConditionList(GanttOperationConditionBuilder[]) - Method in interface nxopen.mechatronics.GanttOperationBuilder
-
Sets the condition data
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- addConics(Tag, int, Tag[]) - Method in interface nxopen.uf.UFSket
-
- addConlinear() - Method in interface nxopen.features.CurveFinderBuilder
-
Adds conlinear relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- addConlinear2dComponent() - Method in interface nxopen.features.CurveFinderBuilder
-
Adds conlinear 2d component relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- addConlinearSketchGroup() - Method in interface nxopen.features.CurveFinderBuilder
-
Adds conlinear sketch group relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- addConnectedByElements() - Method in interface nxopen.assemblies.Subset
-
Add Elements to a subset that reference the existing Design Elements in it by a Connection relation.
- addConnectedPartsInBuilder() - Method in interface nxopen.routing.TransformPathBuilder
-
- addConnection(int, int, boolean, double) - Method in interface nxopen.cae.DurSpecialistSuperpositionEventBuilder
-
Add manual connection
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- addConnections(IConnection[]) - Method in interface nxopen.cae.connections.Element
-
Adds connections to this element
License requirements: nx_masterfem ("Finite Element Modeling")
.
- addConstraint(Constraint) - Method in interface nxopen.positioning.Network
-
- addConstraintSet(SimConstraintSet) - Method in interface nxopen.cae.SimConstraintGroup
-
Adds a constraint set to this group
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- addConstructHandler(DialogItem.Construct, boolean) - Method in interface nxopen.uistyler.DialogItem
-
Registers construct callback.
- addContactPreventionConstraint(CfdContactPreventionConstraint) - Method in interface nxopen.cae.FluidDomainRecipe
-
Adds a
CfdContactPreventionConstraint
constraint
License requirements: nx_adv_fld_mod_solv ("NX Advanced Fluid Modeling - Full") OR sc_acou_meshing (" SC Acoustic Meshing")
Created in NX9.0.0
- addControllingExp(Tag, Tag) - Method in interface nxopen.uf.UFDrf
-
- addCopyHandler(UserDefinedFeatureClass.CopyCallback) - Method in interface nxopen.features.UserDefinedFeatureClass
-
Registers the copy callback.
- addCosmeticEnd() - Method in interface nxopen.weld.FilletBuilder
-
Returns the value identify if a cosmtic end should be added to each end of the fillet.
- addCover() - Method in interface nxopen.linedesigner.HoleFeatureBuilder
-
Returns the presence of cover over hole is checked
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- addCreateFeatureGeometryHandler(CustomFeatureClass.CreateFeatureGeometryCallback) - Method in interface nxopen.features.CustomFeatureClass
-
Registers the custom feature create feature geometry callback.
- addCreateHandler(UserDefinedFeatureClass.CreateCallback) - Method in interface nxopen.features.UserDefinedFeatureClass
-
Registers the create callback.
- addCriteriaToInstance(boolean, String, String) - Method in interface nxopen.tooling.AddReusablePart
-
Sets criteria into instance
License requirements: None.
- addCurve(Curve) - Method in interface nxopen.geometricutilities.CurveShapingBuilder
-
Adds a curve for shaping
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- addCurveFeature(Feature) - Method in interface nxopen.mechatronics.CamBuilder
-
Sets one curve feature
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- addCurveSenseToMap(NXObject, int) - Method in interface nxopen.features.OffsetMoveCurveBuilder
-
This function add the selected curve and its sense into the curve_sense_map when select a new curve
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- addCustomAttributes(CustomAttribute[]) - Method in interface nxopen.features.CustomFeatureData
-
Set the custom feature attributes
License requirements: solid_modeling ("SOLIDS MODELING")
.
- addCustomPopupMenuCallback() - Method in interface nxopen.CustomPopupMenuHandler.AddCustomPopupMenuCallback
-
This callback will be invoked by NX application when a RMB click is performed on
NX Tc Navigator application.
- addCutObject(DisplayableObject) - Method in interface nxopen.DraftingManager
-
Identify object to be drawn as Cut in Drafting
License requirements: None.
- addCutSegment(Point) - Method in interface nxopen.drawings.SectionLineSegmentPointListBuilder
-
- addCutSegment(Point, SectionLineSegmentPointBuilder) - Method in interface nxopen.drawings.SectionLineSegmentPointListBuilder
-
Creates a new
SectionLineSegmentPointBuilder
In case of point to point section line ,new segment is added at location prior to reference cut segment specified.
- AddData() - Constructor for class nxopen.cam.MillingTrackpointBuilder.AddData
-
- AddDataSetBuilder - Interface in nxopen.features.shipdesign
-
- addDataSource(String, int) - Method in interface nxopen.cae.DurSpecialistDataSources
-
Add a file
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- addDatumIconHandler(CustomManager.DatumIconHandler) - Method in interface nxopen.weld.CustomManager
-
Registers a user defined method to be notified when the part navigator is updating the surface or pin datum icon.
- addDatumIdentifier(Tag, UFGdt.DatumIdentifier) - Method in interface nxopen.uf.UFGdt
-
- addDatumPlanes(DatumPlane[]) - Method in interface nxopen.display.PlanarShipGrid
-
Adds intersected datum planes into the planar grid.
- addDatumsButton() - Method in interface nxopen.tooldesigner.SelectDatumsBuilder
-
TODO: fill in a description for this
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- addDatumToFeature(Tag, Tag) - Method in interface nxopen.uf.UFGdt
-
- addDefiningPointAtAbsoluteCoords(Point3d) - Method in interface nxopen.routing.SplinePathBuilder
-
Adds a point to the spline.
- addDefiningPointToSpline(Point, boolean) - Method in interface nxopen.routing.SplinePathBuilder
-
Adds a defining point to the current spline or creates the first point of the new
spline.
- addDeleteHandler(UserDefinedClass.LinkCallback) - Method in interface nxopen.userdefinedobjects.UserDefinedClass
-
Registers the delete callback.
- addDeselectedAcrossObject(DisplayableObject) - Method in interface nxopen.features.shipdesign.StandardPartItemBuilder
-
Adds the specific object to the deselected across object list.
- addDesignElementsToSubset(ModelElementRevision[]) - Method in interface nxopen.assemblies.Subset
-
- addDesignRule(CustomManager.DesignRuleReason, String, String, CustomManager.DesignRule) - Method in interface nxopen.routing.CustomManager
-
Adds the design rule with the given reason.
- addDestructHandler(DialogItem.Destruct, boolean) - Method in interface nxopen.uistyler.DialogItem
-
Registers destruct callback.
- addDetailView(Tag, Tag, double[], double[], double, double[]) - Method in interface nxopen.uf.UFDraw
-
- addDfaMixins() - Method in interface nxopen.pdm.PartOperationImportBuilder
-
Returns the add dfa mixins
License requirements: None.
- addDialogShownHandler(BlockDialog.DialogShown) - Method in interface nxopen.blockstyler.BlockDialog
-
Adds Dialog Shown callback handler to the dialog.
- addDieInsertPart() - Method in interface nxopen.tooling.DieInsertBuilder
-
Add die insert or backing insert part into assembly when creating user defined insert datum plane
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- addDieInsertPart() - Method in interface nxopen.tooling.PiercingInsertBuilder
-
Add user defined die insert or backing insert part.
- addDimension(DimensionData, Point3d, boolean) - Method in interface nxopen.annotations.DimensionSet
-
Adds a dimension to the set
License requirements: drafting ("DRAFTING")
.
- addDisplayHandler(UserDefinedClass.DisplayCallback) - Method in interface nxopen.userdefinedobjects.UserDefinedClass
-
Registers UDO display callback.
- addDivideEvent(int) - Method in interface nxopen.cam.ToolPathDivideBuilder
-
Add a new divide event to the list
License requirements: None.
- addDivisionsBuilderToList(Port) - Method in interface nxopen.routing.SplitDuctBuilder
-
Creates divisions builders for all the divisions, if any, associated with
the cross-section to which the input port belongs and adds them to the list
of divisions.
- addDouble(String, double) - Method in interface nxopen.DataContainer
-
Adds the double value in the container.
- addDoubleClickHandler(MultiSelectList.DoubleClick, boolean) - Method in interface nxopen.uistyler.MultiSelectList
-
Registers double click callback.
- addDoubleClickHandler(SelectionBox.DoubleClick, boolean) - Method in interface nxopen.uistyler.SelectionBox
-
Registers double click callback.
- addDoubleClickHandler(SingleSelectList.DoubleClick, boolean) - Method in interface nxopen.uistyler.SingleSelectList
-
Registers double click callback.
- addDoubleMatrix(String, int, int, double[]) - Method in interface nxopen.DataContainer
-
Adds the double matrix in the container.
- addDoubleVector(String, double[]) - Method in interface nxopen.DataContainer
-
Adds the double vector in the container.
- addDraftPoints(DraftPointData[]) - Method in interface nxopen.geometricutilities.DraftVariableAngleData
-
Adds
DraftPointData
objects
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX4.0.0
- addDragHandler(IntegerScale.Drag, boolean) - Method in interface nxopen.uistyler.IntegerScale
-
Registers drag callback.
- addDragHandler(RealScale.Drag, boolean) - Method in interface nxopen.uistyler.RealScale
-
Registers dtag callback.
- addDrawingAutomationWizardHandler(DrawingUtils.DrawingAutomationWizardHandler) - Method in interface nxopen.DrawingUtils
-
Registers a user defined method that is called whenever Booklet Wizard is committed.
- addDynamicPoints() - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder
-
Adds dynamic points to the Deviation Gauge.
- addDynamicPoints() - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder
-
Adds dynamic points to the draft analysis object
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- ADDED - Static variable in class nxopen.mechatronics.ComparisonResultElectricalPart.Status
-
Added status
- ADDED - Static variable in class nxopen.weld.AutoPointBuilder.InterferenceDetails
-
Indicates weld points exist and parts were added.
- ADDED_BOTTOM_GEOMETRY - Static variable in class nxopen.preferences.PartFlexiblePrintedCircuitDesign.FlatPatternObjectType
-
- ADDED_BOTTOM_GEOMETRY - Static variable in class nxopen.preferences.PartSheetmetal.FlatPatternObjectType
-
- ADDED_BOTTOM_GEOMETRY - Static variable in class nxopen.sheetmetal.FlatPatternSettings.FlatPatternObjectType
-
- ADDED_TOP_GEOMETRY - Static variable in class nxopen.preferences.PartFlexiblePrintedCircuitDesign.FlatPatternObjectType
-
- ADDED_TOP_GEOMETRY - Static variable in class nxopen.preferences.PartSheetmetal.FlatPatternObjectType
-
- ADDED_TOP_GEOMETRY - Static variable in class nxopen.sheetmetal.FlatPatternSettings.FlatPatternObjectType
-
- addedBottom() - Method in interface nxopen.features.sheetmetal.ExportFlatPatternBuilder
-
Returns the option to export the added bottom geometry
License requirements: None.
- addedGatesByRunner() - Method in interface nxopen.tooling.MoldFillingBuilder
-
Returns the gates added by selecting a runner body.
- addEdgeChainData(Edge[], boolean[], boolean, boolean) - Method in interface nxopen.features.EdgeBlendBuilder
-
Add an edge blend edge chain data to the edge blend
License requirements: solid_modeling ("SOLIDS MODELING")
.
- addedGeometry() - Method in interface nxopen.features.sheetmetal.FlatPatternBuilder
-
Returns the added geometry selection
License requirements: None.
- addedGeometry() - Method in interface nxopen.features.sheetmetal.FlatSolidBuilder
-
Returns the added geometry selection
License requirements: None.
- addedGeometry() - Method in interface nxopen.features.sheetmetal.UnbendBuilder
-
Returns the added geometry selection
License requirements: None.
- addEditHandler(UserDefinedFeatureClass.EditCallback) - Method in interface nxopen.features.UserDefinedFeatureClass
-
Registers the edit callback.
- addEditHandler(UserDefinedClass.GenericCallback) - Method in interface nxopen.userdefinedobjects.UserDefinedClass
-
Registers the edit callback.
- addedLayerIndex - Variable in class nxopen.display.IrayPlusMaterialEditorBuilder.AddComponentData
-
- addedTop() - Method in interface nxopen.features.sheetmetal.ExportFlatPatternBuilder
-
Returns the option to export the added top geometry
License requirements: None.
- addEffectivityRow(EffectivityTableRow) - Method in interface nxopen.pdm.EffectivityTableBuilder
-
Adds the given effectivity row to
EffectivityTableBuilder
License requirements: nx_4gd_integration ("4th Generation Design")
Created in NX9.0.0
- addElement(FENode[]) - Method in interface nxopen.cae.MultipleElementCreateBuilder
-
Adds new element definition defined by the list of input
FENode
objects.
- addElement(FENode[], int) - Method in interface nxopen.cae.MultipleElementCreateBuilder
-
Adds new element definition defined by the list of input
FENode
objects.
- addElement(NXObject, CamProfileBuilder.Element) - Method in interface nxopen.mechatronics.CamProfileBuilder
-
Add element to builder.
- addElement(int, int, String, int, int, int, double, double, double, int) - Method in interface nxopen.mechatronics.ExternalConnectionBuilder
-
- addElement(NXObject, String, double, double, double, double, double, double, boolean, boolean, boolean) - Method in interface nxopen.mechatronics.MotionProfileBuilder
-
Add element to builder.
- addElementsToNamedPropertyTableArrayPropertyValue(String, NamedPropertyTable[]) - Method in interface nxopen.cae.PropertyTable
-
Add elements to the referenced object array value of the property
License requirements: None.
- addEnableOKButtonHandler(BlockDialog.EnableOKButton) - Method in interface nxopen.blockstyler.BlockDialog
-
Adds enable-ok-button callback handler to the dialog.
- addEndExtensions(double, double) - Method in interface nxopen.annotations.CenterlineBuilder
-
Adds extensions only at ends
License requirements: drafting ("DRAFTING")
.
- addEndPointsSwitch() - Method in interface nxopen.die.SteelInsertSegmentParentBuilder
-
Returns the add end points switch
License requirements: ug_die_design ("Die Design")
.
- addendum() - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
Returns the collection of addendum faces
License requirements: None.
- AddendumSection - Interface in nxopen.features
-
Represents an Addendum Section feature
To create or edit an instance of this class, use
AddendumSectionBuilder
Created in NX7.5.0
- AddendumSectionBuilder - Interface in nxopen.die
-
- AddendumSectionBuilder.SectionLocationType - Class in nxopen.die
-
The settings indicating the location of the section being created.
- AddendumSectionBuilder.SectionOrientationType - Class in nxopen.die
-
The settings to indicate the section orientation.
- AddendumSectionBuilder.SectionShapeType - Class in nxopen.die
-
The settings to indicate the section shape.
- AddendumSectionBuilder.SegmentParameterType - Class in nxopen.die
-
The settings to indicate which parameter of the segment to lock.
- AddendumSectionBuilder.SegmentType - Class in nxopen.die
-
The settings to indicate the segment type to update.
- AddendumSectionBuilder.SurfaceBuildType - Class in nxopen.die
-
The settings to indicate the surface type.
- AddendumSectionUserDefinedBuilder - Interface in nxopen.die
-
- AddendumSurface - Interface in nxopen.features
-
Represents an Addendum Surface feature
To create or edit an instance of this class, use
AddSurfBuilder
Created in NX6.0.0
- addEntities(TaggedObject[]) - Method in interface nxopen.cae.CaeGroup
-
Adds entities in to the group
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- addEntities(SetObject[]) - Method in interface nxopen.cae.LaminateSelectEntitiesBuilder
-
Add entities to the selection objects
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- addEntities(NXObject[]) - Method in interface nxopen.features.ChangeShellThicknessBuilder
-
Adds entities which have same wall thickness value as the selected face
License requirements: None.
- addEntities(Tag, int, Tag[]) - Method in interface nxopen.uf.UFPlist
-
- addEnum(String, String[]) - Method in interface nxopen.DataContainer
-
Adds the enum members in the container.
- addEqualRadius() - Method in interface nxopen.features.CurveFinderBuilder
-
Adds equal radius relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- addEqualRadius2dComponent() - Method in interface nxopen.features.CurveFinderBuilder
-
Adds equal radius 2d component relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- addEqualRadiusSketchGroup() - Method in interface nxopen.features.CurveFinderBuilder
-
Adds equal radius sketch group relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- addescriptivename - Variable in class nxopen.ame.TypeMappingBuilder.LoadData
-
- addEvaluationFilter(ScEvaluationFiltertype) - Method in interface nxopen.ScCollector
-
Sets the evaluation filter on ScCollector
License requirements: None.
- addException(boolean, DisplayableObject, DisplayableObject, String) - Method in interface nxopen.assemblies.ClearanceAnalysisBuilder
-
Add an exception.
- addExistingCurves(DisplayableObject[]) - Method in interface nxopen.layout2d.Component
-
Add an array of specified curves from top level sketch to this component
License requirements: nx_layout ("NX Layout")
.
- addExistingFunction(SystemObject, String, String) - Method in interface nxopen.mechatronics.MechatronicsManager
-
Adds existing function as children of specified object.
- addExistingLogical(SystemObject, String, String) - Method in interface nxopen.mechatronics.MechatronicsManager
-
Adds existing logical as children of specified object.
- addExistingRequirement(SystemObject, String, String) - Method in interface nxopen.mechatronics.MechatronicsManager
-
Adds existing requirement as children of specified object.
- addExpressionReference(String, String, int, int) - Method in interface nxopen.annotations.TextWithSymbolsBuilder
-
Adds an expression reference
License requirements: drafting ("DRAFTING")
.
- addExtension(int, double) - Method in interface nxopen.annotations.CenterlineBuilder
-
Adds extension based on select object index
License requirements: drafting ("DRAFTING")
.
- addExtensionToggle() - Method in interface nxopen.mechanicalrouting.PathTransitionBuilder
-
Returns the toggle to set forward/backward extensions for this transition.
- addExtractedObjects(Tag, int, Tag[], int) - Method in interface nxopen.uf.UFSket
-
- AddExtractedObjectsData() - Constructor for class nxopen.uf.UFSket.AddExtractedObjectsData
-
- addFace(QuickBinderBuilder.Types) - Method in interface nxopen.die.QuickBinderBuilder
-
Add a component face to the binder body.
- addFacePair(Face, Face) - Method in interface nxopen.features.sheetmetal.ClosedCornerBuilder
-
Add a face pair.
- addFacePair(Face, Face) - Method in interface nxopen.features.sheetmetal.EditCornerBuilder
-
Add a face pair.
- addFacePair(Face, Face) - Method in interface nxopen.features.sheetmetal.ThreeBendCornerBuilder
-
Input a bend face pair for the three bend corner feature.
- addFaceSets(FaceSetOffset[]) - Method in interface nxopen.features.OffsetSurfaceBuilder
-
- addFacesOcfData(Tag, UFCurve.OcfData) - Method in interface nxopen.uf.UFCurve
-
- addFacetToModel(Tag, int, double[][], double[][], int[]) - Method in interface nxopen.uf.UFFacet
-
- addFeature(CAMFeature) - Method in interface nxopen.cam.FeatureGeometryGroup
-
Adds a feature to the feature geometry group
License requirements: cam_base ("CAM BASE")
.
- addFeatureGroupIntoConvertibleSet(FeatureGroup[]) - Method in interface nxopen.geometricutilities.ConvertFeatureGroupsToModulesBuilder
-
Add feature group into convertible set
License requirements: None.
- addFeatureSet(CAMFeature, String) - Method in interface nxopen.cam.fbm.FeatureGeometry
-
Creates a feature geometry set
License requirements: cam_base ("CAM BASE")
.
- addFeatureType(String) - Method in interface nxopen.features.shipdesign.FeaturesBatchOperationBuilder
-
Add feature type
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- addField(String) - Method in interface nxopen.features.UserDefinedFeatureApplicationData
-
Adds named field.
- addField(Field) - Method in interface nxopen.fields.ExportData
-
Add a field
License requirements: None.
- addFieldDescription(PdmSearch, PdmSoaqueryNxmgrfielddatatype, String, String, String, String, String, ListOfValues) - Method in interface nxopen.pdm.SoaQuery
-
- addFields(Field[]) - Method in interface nxopen.fields.ExportData
-
Add a field
License requirements: None.
- addFile(String) - Method in interface nxopen.annotations.ImportAutocadBlockBuilder
-
Adds a file to import list
License requirements: nx_layout ("NX Layout")
.
- addFile(String, String) - Method in interface nxopen.DataContainer
-
Adds the value in the container.
- addFile(String, String) - Method in interface nxopen.pdm.CAEFileContainer
-
- addFileOperationHandler(DialogItem.FileOperation, boolean) - Method in interface nxopen.uistyler.DialogItem
-
Registers file operation callback.
- addfillets() - Method in interface nxopen.cae.ResultVariable
-
Returns the Beam fillets
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- addFillets() - Method in interface nxopen.features.SmoothCurveStringBuilder
-
Returns a flag to add transition fillets to sharp edges with a specified radius.
- addFillingComponents() - Method in interface nxopen.tooling.MoldFillingBuilder
-
Adds gate or runner component.
- addFillingLineByChain(DraftingCurve[], boolean) - Method in interface nxopen.features.shipdesign.InteractiveAnnotationBuilder
-
Adds opening filling lines by curve chain method.
- addFillingLineByPoints(Point, Point) - Method in interface nxopen.features.shipdesign.InteractiveAnnotationBuilder
-
Adds opening filling lines by points method.
- addFillingLinesByModelBody(DraftingBody, DraftingCurve[]) - Method in interface nxopen.features.shipdesign.InteractiveAnnotationBuilder
-
Adds opening filling lines by model body.
- addFilter(int) - Method in interface nxopen.blockstyler.SelectObject
-
Adds the filters for select object block
This method takes the integer value of the desired enum values from
SelectObject.FilterType
.
- addFilter(SelectObject.FilterType) - Method in interface nxopen.blockstyler.SelectObject
-
Adds the filters for select object block
This method takes the desired enumeration value from
SelectObject.FilterType
.
- addFilter(int, int, int) - Method in interface nxopen.blockstyler.SelectObject
-
Adds the filter for select object block using type, subtype and solidBodyType
License requirements: None.
- addFilterHandler(BlockDialog.Filter) - Method in interface nxopen.blockstyler.BlockDialog
-
Adds Filter callback handler to the dialog.
- addFitHandler(UserDefinedClass.DisplayCallback) - Method in interface nxopen.userdefinedobjects.UserDefinedClass
-
Registers the fit callback.
- addFittingPoints(Point) - Method in interface nxopen.tooling.CoolingFittingData
-
Add cooling fitting points to the fitting data.
- addfixconstraint - Variable in class nxopen.routing.SubdivideSegmentBuilder.SplineSettingValuesData
-
Adds a fix constraint at newly created subdivision locations
- addFlangeEntities(int, TaggedObject[]) - Method in interface nxopen.cae.connections.IFlangesContainer
-
Add entities to flange.
- addFocusNotifyHandler(BlockDialog.FocusNotify) - Method in interface nxopen.blockstyler.BlockDialog
-
Adds focus notify callback handler to the dialog.
- addFolder(String) - Method in interface nxopen.annotations.ImportAutocadBlockBuilder
-
Adds a folder to import list
License requirements: nx_layout ("NX Layout")
.
- addFolder(Folder) - Method in interface nxopen.cae.connections.Folder
-
Add a subfolder to this folder.
- addFolder(SimLbcFolder) - Method in interface nxopen.cae.SimSolution
-
Add the folder to the solution
Only the folder not under other folder can be added to solution.
- addFolder(SimLbcFolder) - Method in interface nxopen.cae.SimSolutionStep
-
Add the folder to the solution
Only the folder not under other folder can be added to solution.
- addFolder(SimSolution, SimLbcFolder) - Method in interface nxopen.cae.SolutionManager
-
Add bc folder to a solution
License requirements: nx_masterfem ("Finite Element Modeling")
.
- addFolder(SimSolutionStep, SimLbcFolder) - Method in interface nxopen.cae.StepManager
-
Add bc folder to a step
License requirements: nx_masterfem ("Finite Element Modeling")
.
- addFolderObjects(PMNavFolderObject[]) - Method in interface nxopen.mechatronics.PMNavFolderLocator
-
Add folder objects
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- addFolderToSearch() - Method in interface nxopen.tooling.RenameAndExportComponentBuilder
-
Returns the add folder to search
License requirements: None.
- addFont(String) - Method in interface nxopen.FontCollection
-
Adds a font to the part.
- addFont(String, FontCollection.Type) - Method in interface nxopen.FontCollection
-
Adds a font to the part.
- addFont(Tag, String) - Method in interface nxopen.uf.UFUgfont
-
- AddFontBuilder - Interface in nxopen.routing
-
Builder for creating an add font user interface dialogue
To obtain an instance of this class use
AddFontBuilder
Created in NX8.5.0
- addForeshorteningSymbol() - Method in interface nxopen.drawings.ViewBreakBuilder
-
Returns the foreshortening symbol addition
License requirements: None.
- addFormSheetMapping(DocumentType, String) - Method in interface nxopen.ame.FormSheetSettingsBuilder
-
Adds form sheet mapping with document type
License requirements: None.
- addFragmentPlacedSheetElement(FragmentObject, SheetElement) - Method in interface nxopen.ame.DiagramManager
-
Add placed sheet element to fragment object
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- addFromDataFileAttributeList() - Method in interface nxopen.tooling.ObjectAttributeManagementBuilder
-
The action to add selected attributes from attributes spreadsheet
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- addFromSpreadsheetAttributeList() - Method in interface nxopen.tooling.GeneralInsertBuilder
-
Move attribute from Attribute from Spreadsheet to Attribute of Object
License requirements: None.
- addFromTerminal(LogicalTerminal) - Method in interface nxopen.routing.LogicalConnection
-
- addGeometry(NXObject) - Method in interface nxopen.sim.KinematicComponentBuilder
-
Adds a single geometry element
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder") OR resource_manager_nx ("Teamcenter Resource Manager")
.
- addGeometry(DisplayableObject, Sketch.InferConstraintsOption) - Method in interface nxopen.Sketch
-
Adds a curve or point to the sketch
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- addGeometry(DisplayableObject) - Method in interface nxopen.Sketch
-
Adds a curve or point to the sketch.
- addGeometry(Curve, Sketch.InferConstraintsOption, Sketch.AddEllipseOption) - Method in interface nxopen.Sketch
-
Adds a curve or point to a sketch.
- addGeometry(Sketch.InferConstraintsOption, Sketch.AddEllipseOption, SmartObject[]) - Method in interface nxopen.Sketch
-
Adds an array of curves or points to a sketch.
- addGlobalBc(SimBC) - Method in interface nxopen.cae.StepManager
-
Add bc to global bc group in solution
License requirements: nx_masterfem ("Finite Element Modeling")
.
- addGlobalFolder(SimLbcFolder) - Method in interface nxopen.cae.StepManager
-
Add bc folder to global bc group in solution
License requirements: nx_masterfem ("Finite Element Modeling")
.
- addGlobalLayup(LaminateGlobalLayup) - Method in interface nxopen.cae.LaminateRelabelPliesBuilder
-
Adds a layup to the list of layups that will have their plies relabeled.
- addGlobalLoadset(SimLoadSet) - Method in interface nxopen.cae.StepManager
-
Add loadset to global bc group in solution
License requirements: nx_masterfem ("Finite Element Modeling")
.
- addGroupMember(SheetElement) - Method in interface nxopen.diagramming.NodeBuilder
-
Adds a node to this node group.
- addHandShapeLib(String) - Method in interface nxopen.features.HumanBuilder
-
Add hand shape library
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- addHeaderRow(Tag, Tag, int) - Method in interface nxopen.uf.UFTabnot
-
- addHelixMotion(PathHelixMotion, CamPathToolpathEventLocation, PathEvent) - Method in interface nxopen.cam.Path
-
Add a helix move at location, if location is end location(append)
then the reference is not relevant
License requirements: None.
- addHighlightHandler(CustomFeatureClass.HighlightCallback) - Method in interface nxopen.features.CustomFeatureClass
-
Registers the custom feature highlight callback.
- addHoldingSystem(String) - Method in interface nxopen.sim.KinematicComponentBuilder
-
Adds a holding system to the component
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- addHoldingSystem(String) - Method in interface nxopen.sim.KinematicConfigurator
-
Adds a new user holding system to the list of holding systems
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- addHoleInstance(Point3d, Point3d) - Method in interface nxopen.tooling.AddReusablePart
-
Adds series of reusable components in holes
License requirements: None.
- addHoleInstanceForCsys(Point3d, Point3d, NXObject) - Method in interface nxopen.tooling.AddReusablePart
-
Adds series of reusable components in csys
License requirements: None.
- addHolesData(Edge[], Face[]) - Method in interface nxopen.tooling.RemoveHolesBuilder
-
Add the hole data
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- addIconHandler(UserDefinedFeatureClass.IconCallback) - Method in interface nxopen.features.UserDefinedFeatureClass
-
Registers the udf icon callback.
- addImage(String, String) - Method in interface nxopen.openxml.ImageGroupDocumentData
-
- addImageGroup() - Method in interface nxopen.openxml.DocumentDataGroup
-
- addImageGroup() - Method in interface nxopen.openxml.TableCellData
-
- addImageGroup() - Method in interface nxopen.report.ResultXmlFileWriter
-
- addIndex() - Method in interface nxopen.ObjectGeneralPropertiesBuilder
-
Returns the add index.
- addInformationHandler(CustomFeatureClass.InformationCallback) - Method in interface nxopen.features.CustomFeatureClass
-
Registers the custom feature information callback.
- addInformationHandler(UserDefinedClass.GenericCallback) - Method in interface nxopen.userdefinedobjects.UserDefinedClass
-
Registers the information callback.
- addInitializeCallback(PartOperationImportObserver.InitializeCb) - Method in interface nxopen.pdm.PartOperationImportObserver
-
Registers a user defined Initialize callback that is called during initialization of import builder
License requirements: None.
- addInitializeHandler(BlockDialog.Initialize) - Method in interface nxopen.blockstyler.BlockDialog
-
Adds Initialize callback handler to the dialog.
- addInsertComponent() - Method in interface nxopen.tooling.BendInsertDesignBuilder
-
Add the new bend insert component
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- addInsertPartIntoAssembly(NXObject, String, Point3d) - Method in interface nxopen.tooling.SpecialFormingBuilder
-
Add insert part into assembly.
- addInsertPartIntoAssembly(NXObject, String, Point3d) - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder
-
Add insert part into assembly.
- addInstance(int, int) - Method in interface nxopen.geometricutilities.PatternClockingBuilder
-
Adds an instance that will get this clocking
License requirements: None.
- addInstanceDefinition(String, InstanceDefinition, String) - Method in interface nxopen.partfamily.TemplateManager
-
Creates a new family member definition with the supplied name and places it just under previous family member definition.
- addInstanceDefinitionUsingMemberIdentifier(MemberIdentifier, InstanceDefinition, String) - Method in interface nxopen.partfamily.TemplateManager
-
Creates a new family member definition with the supplied member identifier places it just under previous family member definition.
- addInsulationOnFittings() - Method in interface nxopen.mechanicalrouting.InsulationBuilder
-
Returns the value for whether insulation be added on fitting parts or not
License requirements: routing_base ("Routing Basic")
.
- addInteger(String, int) - Method in interface nxopen.DataContainer
-
Adds the integer value in the container.
- addIntegerMatrix(String, int, int, int[]) - Method in interface nxopen.DataContainer
-
Adds the integer matrix in the container.
- addIntegerVector(String, int[]) - Method in interface nxopen.DataContainer
-
Adds the integer vector in the container.
- addInterface() - Method in interface nxopen.ame.MountingInterfaceBuilder
-
Adds a
MountingInterface
object
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
Created in NX12.0.0
- addIntermediateTerminal(LogicalTerminal) - Method in interface nxopen.routing.electrical.Connection
-
Add an intermediate terminal to this connection
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- addInternalFeaturePreUpdateHandler(CustomFeatureClass.InternalFeaturePreUpdateCallback) - Method in interface nxopen.features.CustomFeatureClass
-
Registers the internal feature pre update callback.
- addInterpartParents() - Method in interface nxopen.assemblies.Subset
-
Add sources of interpart relationships (wave links in the subset and Connected To relationships for design features)
that are not in the specified subset to the subset recipe.
- ADDINTO_LIST - Static variable in class nxopen.tooling.PiercingInsertMiniToolsBuilder.AssociationToolItems
-
- addIntParameter(String, int, boolean, boolean) - Method in interface nxopen.mechatronics.ParameterStockBuilder
-
Adds Int parameter.
- addIntSourceEntity(int) - Method in interface nxopen.features.TrackingData
-
Adds the source entity of integer type for tracked entity
License requirements: solid_modeling ("SOLIDS MODELING")
.
- addIsInHistoryBuffer(IsvControlPanelBuilder.IsInHistoryBufferCb) - Method in interface nxopen.sim.IsvControlPanelBuilder
-
Registers the IsInHistoryBufferChanged callback.
- addIssue(IssueContent) - Method in interface nxopen.issue.IssueBriefcase
-
- addItemToDisplay(Tag) - Method in interface nxopen.uf.UFDisp
-
- addIteration(int) - Method in interface nxopen.cae.DurabilityResultPathBuilder
-
Adds an iteration.
- ADDITIONAL_DIE - Static variable in class nxopen.tooling.QuickQuotationBuilder.DesignTypes
-
The design is a additional die
- ADDITIONAL_LENGTH - Static variable in class nxopen.routing.SplinePathBuilder.SplinePathSlackType
-
The length of the spline is increased by an additional length.
- ADDITIONAL_OBJECTS_INVOLVED - Static variable in class nxopen.ame.AMEManager.PasteStatus
-
- additionalBendFaces() - Method in interface nxopen.tooling.DirectUnfoldBuilder
-
Returns the additional bend faces
License requirements: None.
- additionalboltlength - Variable in class nxopen.routing.ReuseLibrary.SpecificationsGetGeneralConnectionOptionsData
-
Additional length for bolts.
- additionalCommands() - Method in interface nxopen.cam.TurningOperationBuilder
-
Returns the Additional Commands
License requirements: None.
- additionalCurves - Variable in class nxopen.uf.UFSmd.AskFpAddCurvesData
-
- additionalFacesToConvert() - Method in interface nxopen.features.sheetmetal.ConvertToSheetmetalBuilder
-
Returns the additional faces to convert
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- additionalFrequenciesBreakPoints() - Method in interface nxopen.cae.LaminateSineEventBuilder
-
Returns the option to consider break points
License requirements: None.
- additionalFrequenciesUnits() - Method in interface nxopen.cae.LaminateSineEventBuilder
-
Returns the option to consider break points
License requirements: None.
- additionalInertia - Variable in class nxopen.tooling.SIZERExportBuilder.MCDMechanicalData
-
Additional Inertia value
- additionalInertia - Variable in class nxopen.tooling.SIZERExportBuilder.MechanicalData
-
Additional Inertia value
- additionalObjects() - Method in interface nxopen.features.shipdesign.ShipStructureBuilder
-
Returns the additional objects list, just used in basic design.
- additionalPasses() - Method in interface nxopen.cam.PlanarOperationBuilder
-
Returns the Boundary Additional Passes
License requirements: None.
- additionalPasses() - Method in interface nxopen.cam.StepoverBuilder
-
Returns the number of additional passes
License requirements: None.
- additionalPlanesPerFrame() - Method in interface nxopen.features.shipdesign.ShellExpansionBuilder
-
Returns the additional planes per frame
License requirements: None.
- additionalProfiling() - Method in interface nxopen.cam.TurnCutParameters
-
Returns the additional profiling
License requirements: None.
- additionalReferences() - Method in interface nxopen.weld.DatumCommonBuilder
-
Returns the additional references.
- additionalReferences() - Method in interface nxopen.weld.LocatorReferenceBuilder
-
Returns the additional references
License requirements: None.
- additionalSmoothingOption() - Method in interface nxopen.cae.SmoothOptResultsBuilder
-
Returns the additonal smoothing option
License requirements: None.
- additionalStructures() - Method in interface nxopen.features.shipdesign.PinJigBuilder
-
Returns the additional structures connected to the plates.
- additionalStructures() - Method in interface nxopen.features.shipdesign.SectionViewBuilder
-
- additionalStructures() - Method in interface nxopen.features.shipdesign.SelectStructuresBuilder
-
Returns the additional structures selected by the user
License requirements: nx_ship_drafting ("Ship Drafting")
.
- additionalStructures() - Method in interface nxopen.features.shipdesign.ShipStructureBuilder
-
Returns the additional structures list, just used in detail design.
- additionalstudlength - Variable in class nxopen.routing.ReuseLibrary.SpecificationsGetGeneralConnectionOptionsData
-
Additional length for studs
- addJobToPlotLayout(Tag, UFPlot.JobOptions, String, UFPlot.Units, double[], UFPlot.Rotation, double) - Method in interface nxopen.uf.UFPlot
-
- addKeyboardFocusNotifyHandler(BlockDialog.KeyboardFocusNotify) - Method in interface nxopen.blockstyler.BlockDialog
-
Adds keyboard focus notify callback handler to the dialog.
- addKitDirectory(String, String) - Method in interface nxopen.sim.ExportMachineKitBuilder
-
Add a subdirectory to the machine kit at the given directory.
- addKitFile(String, String) - Method in interface nxopen.sim.ExportMachineKitBuilder
-
Add a file to the machine kit at the given directory.
- addKitFolder(String, String) - Method in interface nxopen.sim.ExportMachineKitBuilder
-
Add a folder, all containing files and subfolder to the machine kit at the given directory.
- addLeader(LeaderBundle) - Method in interface nxopen.annotations.BaseCustomSymbol
-
Adds leaders to the custom symbol.
- addLeader(Tag, UFGdt.LeaderSpec) - Method in interface nxopen.uf.UFGdt
-
- addLeftRailing() - Method in interface nxopen.linedesigner.DBStairwayEquipmentNode
-
An API to add left railing to stairway
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- addLeftRailingToggle() - Method in interface nxopen.linedesigner.StairwayEquipmentBuilder
-
Returns the left railing toggle
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- addLegsEntities(TaggedObject[]) - Method in interface nxopen.cae.connections.INodalTargetLegs
-
Add entities to target's group of points.
- addLevelMarker(PathLevelMarker, CamPathToolpathEventLocation, PathEvent) - Method in interface nxopen.cam.Path
-
Add a level marker event at location, if location is end location(append)
then the reference is not relevant
License requirements: None.
- addLevelsUsingGeom(Tag, int, Tag, double) - Method in interface nxopen.uf.UFCutLevels
-
- addLevelsUsingZ(Tag, int, double[], double) - Method in interface nxopen.uf.UFCutLevels
-
- addLibraryFolder() - Method in interface nxopen.mfg.am.ProfileLibrary
-
Adds a New Profile Folder
License requirements: None.
- addLinearMotion(PathLinearMotion, CamPathToolpathEventLocation, PathEvent) - Method in interface nxopen.cam.Path
-
Add a linear move at location, if location is end location(append)
then the reference is not relevant
License requirements: None.
- addLineToSetOfAllEditedSegments() - Method in interface nxopen.routing.EditLineSegmentBuilder
-
Adds the current line segment to the set of all line segments that have been edited
by the user.
- addListParameter(String, String[], ParameterStockBuilder.Assignment, boolean, boolean) - Method in interface nxopen.mechatronics.ParameterStockBuilder
-
Adds List parameter.
- addLoadCase(LoadCase) - Method in interface nxopen.cae.aerostructures.LoadCaseSetBuilder
-
Insert a loadcase to the load case set builder
License requirements: nx_masterfem ("Finite Element Modeling")
.
- addLoadcase(int) - Method in interface nxopen.cae.DurabilityResultPathBuilder
-
Adds a loadcase.
- addLoadCases(TBSLoadCase[]) - Method in interface nxopen.cae.optimization.TBSLoadCaseManager
-
Adds the load cases
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
- addLoading(BaseDataLoadingBuilder) - Method in interface nxopen.features.vehicledesign.BaseDataBuilder
-
- addLoadSet(SimLoadSet) - Method in interface nxopen.cae.SimLoadGroup
-
Adds a load set to this group
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- addLoadset(SimSolution, SimLoadSet) - Method in interface nxopen.cae.SolutionManager
-
Add loadset to a solution
License requirements: nx_masterfem ("Finite Element Modeling")
.
- addLoadset(SimSolutionStep, SimLoadSet) - Method in interface nxopen.cae.StepManager
-
Add loadset to a step
License requirements: nx_masterfem ("Finite Element Modeling")
.
- addLocalResolutionConstraint(CfdLocalResolutionConstraint) - Method in interface nxopen.cae.FluidDomainRecipe
-
Adds a
CfdLocalResolutionConstraint
constraint
License requirements: nx_adv_fld_mod_solv ("NX Advanced Fluid Modeling - Full") OR sc_acou_meshing (" SC Acoustic Meshing")
Created in NX9.0.0
- addLocationCoordinates(int, Point3d) - Method in interface nxopen.cae.connections.ILocationsSinglePointContainer
-
Adds a coordinates location to connection location list
License requirements: nx_masterfem ("Finite Element Modeling")
.
- addLocationCoordinatesWithDirectionCoordinates(int, Point, Point) - Method in interface nxopen.cae.connections.ILocationsWithDirContainer
-
Adds a coordinates location with direction definited by coordinates to connection location list
License requirements: nx_masterfem ("Finite Element Modeling")
.
- addLocationCoordinatesWithDirectionVector(int, Point, Direction) - Method in interface nxopen.cae.connections.ILocationsWithDirContainer
-
Adds a coordinates location with direction definited by vector to connection location list
License requirements: nx_masterfem ("Finite Element Modeling")
.
- addLocationCurve(int, IBaseCurve) - Method in interface nxopen.cae.connections.ILocationsWithDiscretizationContainer
-
Adds a curve location to connection location list
License requirements: nx_masterfem ("Finite Element Modeling")
.
- addLocationFeEdges(int, FEElemEdge[]) - Method in interface nxopen.cae.connections.ILocationsWithDiscretizationContainer
-
Adds Fe Edges to connection location list
License requirements: nx_masterfem ("Finite Element Modeling")
.
- addLocationNode(int, FENode) - Method in interface nxopen.cae.connections.ILocationsSinglePointContainer
-
Adds a node location to connection location list
License requirements: nx_masterfem ("Finite Element Modeling")
.
- addLocationPoint(int, Point) - Method in interface nxopen.cae.connections.ILocationsSinglePointContainer
-
Adds a point location to connection location list
License requirements: nx_masterfem ("Finite Element Modeling")
.
- addLocationSelectionRecipe(int, SelectionRecipe) - Method in interface nxopen.cae.connections.ILocationsMultiPointContainer
-
Adds a Selection Recipe to connection location list
License requirements: nx_masterfem ("Finite Element Modeling")
.
- addLocationSeriesOfCoordinates(int, Point3d[]) - Method in interface nxopen.cae.connections.ILocationsWithDiscretizationContainer
-
Adds a series of coordinates location to connection location list
License requirements: nx_masterfem ("Finite Element Modeling")
.
- addLocationSeriesOfNodes(int, FENode[]) - Method in interface nxopen.cae.connections.ILocationsWithDiscretizationContainer
-
Adds a series of nodes location to connection location list
License requirements: nx_masterfem ("Finite Element Modeling")
.
- addLocationSeriesOfPoints(int, Point[]) - Method in interface nxopen.cae.connections.ILocationsWithDiscretizationContainer
-
Adds a series of points location to connection location list
License requirements: nx_masterfem ("Finite Element Modeling")
.
- addLogical(String, boolean) - Method in interface nxopen.DataContainer
-
Adds the logical value in the container.
- addManualPair(int, int) - Method in interface nxopen.cae.CorrelModePairingBuilder
-
Add a manually paired mode pair
License requirements: nx_correl_base ("FE Correlation")
.
- addMapEntityHandler(LinkedPartManager.MapEntityHandler) - Method in interface nxopen.LinkedPartManager
-
Registers a user defined map entity method that is called whenever a linked mirror part is created or updated from source
License requirements: None.
- addMargin(OrdinateOriginDimension, OrdinateMargin, double) - Method in interface nxopen.annotations.OrdinateMarginCollection
-
Adds an ordinate margin object
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- addMaster(Part, NXObject) - Method in interface nxopen.motion.MotionSimulation
-
Creates a new
Component
in this motion simulation assembly as master part
License requirements: mechanisms ("MECHANISMS")
Created in NX12.0.0
- addMasterComponentPart() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
Returns the option to specify whether or not the master component part will be added.
- addMasterPart(String) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
Add the master part to the work part as one component by the given part name.
- addMasterPart(Part) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
Add the master part to the work part as one component by the given part object.
- addMasterPartComponent(String, String, String, Point3d, Matrix3x3, int) - Method in interface nxopen.assemblies.ComponentAssembly
-
Creates a new
Component
in this assembly as master part.
- addMasterPartComponent(Part, String, String, Point3d, Matrix3x3, int) - Method in interface nxopen.assemblies.ComponentAssembly
-
Creates a new
Component
in this assembly as master part.
- addMatchingBreakpoint(String) - Method in interface nxopen.sim.NcProgramManagerBuilder
-
Add a matching breakpoint to program manager.
- addMember(SheetElement) - Method in interface nxopen.diagramming.GroupBuilder
-
Add a member.
- addMember(PartFamilyMemberValues) - Method in interface nxopen.PartFamilyManager
-
- addMember(Tag, UFFam.MemberData) - Method in interface nxopen.uf.UFFam
-
- addMemberConstraints(SimConstraint[]) - Method in interface nxopen.cae.SimConstraintSet
-
Add constraint members to constraint set.
- addMemberFolders(SimLbcFolder[]) - Method in interface nxopen.cae.SimConstraintSet
-
Add root folder members to constraint set.
- addMemberFolders(SimLbcFolder[]) - Method in interface nxopen.cae.SimLoadSet
-
Add root folder members to load set.
- addMemberItems(TaggedObject) - Method in interface nxopen.routing.DefineRunBuilder
-
Append a member item to the list in the builder for DefineRun
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- addMemberLoads(SimLoad[]) - Method in interface nxopen.cae.SimLoadSet
-
Add load members to load set.
- addMemberSet(SimLoadSet) - Method in interface nxopen.cae.SimLoadSet
-
Add a load set member to load set.
- addMembersWithRelocation(Feature[], boolean, boolean) - Method in interface nxopen.features.FeatureGroup
-
Adds given features into feature group.
- addMemberToGroup(Tag, Tag) - Method in interface nxopen.uf.UFGroup
-
- addMenu(int, String) - Method in interface nxopen.CustomPopupMenu
-
Adds and returns a menu to this menu
License requirements: None.
- addMenu(int, String) - Method in interface nxopen.CustomPopupMenuHandler
-
Adds and returns a menu to the COTS (Commercial, off-the-shelf) RMB menu
License requirements: None.
- addMenuAction(String, MenuBarManager.ActionCallback) - Method in interface nxopen.menubar.MenuBarManager
-
Adds the action callback.
- addMenuButton(MenuButton, int) - Method in interface nxopen.menubar.ContextMenu
-
Adds a menu bar button to the context menu.
- addMenuItem(int, String) - Method in interface nxopen.blockstyler.TreeListMenu
-
Adds single menu item
License requirements: None.
- addMenuItem(int, String, String) - Method in interface nxopen.blockstyler.TreeListMenu
-
Adds single menu item
License requirements: None.
- addMenuItem(int, String) - Method in interface nxopen.CustomPopupMenu
-
Adds and returns a menu item to this menu
License requirements: None.
- addMenuItem(int, String) - Method in interface nxopen.CustomPopupMenuHandler
-
Adds and returns a menu item to the COTS (Commercial, off-the-shelf) RMB menu
License requirements: None.
- addMenuLabel(String, int) - Method in interface nxopen.menubar.ContextMenu
-
Adds a label to the context menu.
- addMenuSeparator() - Method in interface nxopen.CustomPopupMenu
-
Adds a separator in the submenu
License requirements: None.
- addMenuSeparator() - Method in interface nxopen.CustomPopupMenuHandler
-
Adds a separator to the COTS (Commercial, off-the-shelf) RMB menu
License requirements: None.
- addMergeRegionPoint(Point3d) - Method in interface nxopen.features.shipdesign.PlateBuilder
-
Adds a merge region point.
- addModifyFeatureGeometryHandler(CustomFeatureClass.ModifyFeatureGeometryCallback) - Method in interface nxopen.features.CustomFeatureClass
-
Registers the custom feature modify feature geometry callback.
- addModifyFeatureHandler(CustomManager.ModifyFeatureHandler) - Method in interface nxopen.weld.CustomManager
-
Registers a user defined method to be notified when weld features are created or edited.
- addMovableObject(NXObject) - Method in interface nxopen.positioning.Network
-
Add a movable object to the network.
- addMultipleVariantRules(String[], String[]) - Method in interface nxopen.pdm.VariantConfigurationBuilder
-
Adds given variant rules in case of multiple variant rules to
VariantConfigurationBuilder
The input contextIds comprising of multifield key and itemRev_id:
In case of default domain: contextId should contain Teamcenter item ID.
- addNameAspect(String, String) - Method in interface nxopen.ame.EngineeringObjectAspectDetailBuilder
-
Adds a specific name for an aspect
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- addNeatTrim() - Method in interface nxopen.features.shipdesign.StiffenerBuilder
-
Returns the option to add neat trim to plate edge reinforcements.
- addNewChildrenToSubset() - Method in interface nxopen.assemblies.Subset
-
If the Reuse Design Elements in the subset contain any new components which were not added
to the subset because its owning workset was not the displayed part at the time of creation,
then add those new components to the subset now.
- addNewClass(String, String, String) - Method in interface nxopen.cam.Teaching
-
Adds a new class
License requirements: fbm_author ("FBM Author")
.
- addNewFeatureType(String, String) - Method in interface nxopen.cam.FeatureTeaching
-
Adds a new feature type
License requirements: fbm_author ("FBM Author")
.
- addNewInstance(Component, int) - Method in interface nxopen.tooling.AddReusablePart
-
Adds a new instance
License requirements: None.
- addNewMappingRule(String) - Method in interface nxopen.cam.MapFeatureTeaching
-
Adds a new mapping rule
License requirements: fbm_author ("FBM Author")
.
- addNewRule(int, String, ProductMatchingRulesBuilder.Condition, String, String) - Method in interface nxopen.ame.ProductMatchingRulesBuilder
-
Add new product matching rule
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- addNewRule(String, String, String) - Method in interface nxopen.cam.FeatureTeaching
-
Adds a new rule
License requirements: fbm_author ("FBM Author")
.
- addNewRule(String) - Method in interface nxopen.cam.Teaching
-
Adds a new rule
License requirements: fbm_author ("FBM Author")
.
- addNewSet(boolean) - Method in interface nxopen.blockstyler.SetList
-
Adds an item to the end of the list
License requirements: None.
- addNewSetLabel() - Method in interface nxopen.blockstyler.SetList
-
Returns the AddNewSetLabel.
- addNewSpecification(String) - Method in interface nxopen.routing.ReuseLibrary
-
Adds a new empty specification to the library.
- addNewStopshortData(BlendStopshortBuilder) - Method in interface nxopen.features.EdgeBlendBuilder
-
Add an edge blend stop short data for an edge in the edge blend
License requirements: solid_modeling ("SOLIDS MODELING")
.
- addNewTaper() - Method in interface nxopen.features.EmbossSidewall
-
Create a new single
EmbossTaper
object and appends to the sidewall taper list.
- addNgcComponent(String) - Method in interface nxopen.pdm.PendingComponentsManager
-
Adds a pending NGC component.
- addNodes(FENode[], boolean[], boolean[], boolean[], boolean[], boolean[], boolean[]) - Method in interface nxopen.cae.CaeDOFSet
-
Add nodes to the CaeDOFSet
A true for a dof logical entry would mean that the dof is included for that corresponding node.
- addNodes(FENode[]) - Method in interface nxopen.cae.connections.NodeSeriesLocation
-
Add location nodes.
- addNodes(Point3d[]) - Method in interface nxopen.cae.MultipleNodeCreateBuilder
-
Adds new node definitions at specifiied positions with repect to the
defined refernce coordinate system.
- addNodes(Point3d[], int[]) - Method in interface nxopen.cae.MultipleNodeCreateBuilder
-
Adds a new node definition at specifiied positions with repect to the
defined refernce coordinate system.
- addNonIntersectedStructure(Body) - Method in interface nxopen.features.shipdesign.PenetrationAssociationBuilder
-
Adds nonintersected structures
License requirements: nx_penetration_mgmt ("Penetration Management")
.
- addNonIntersectedStructure(Body) - Method in interface nxopen.features.shipdesign.PenetrationCutoutBuilder
-
Adds nonintersected structures
License requirements: nx_penetration_mgmt ("Penetration Management")
.
- addNonIntersectedStructure(Body) - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder
-
Adds nonintersected structures
License requirements: nx_penetration_mgmt ("Penetration Management")
.
- addObject(DurSpecialistParameterObject) - Method in interface nxopen.cae.DurSpecialistSimulationObjectTable
-
- addObject(NXObject) - Method in interface nxopen.motion.MotionSolution
-
- addObject(Tag, boolean, Tag) - Method in interface nxopen.uf.UFPlist
-
- addObjectClearanceZone(DisplayableObject, Expression) - Method in interface nxopen.assemblies.ClearanceAnalysisBuilder
-
Add a Clearance Zone around an object.
- addObjectives(TBSSingleObjective[]) - Method in interface nxopen.cae.optimization.TBSObjectives
-
Add objectives
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
- addObjects(TaggedObject[]) - Method in interface nxopen.mechatronics.PMNavFolderObject
-
Adds physics objects.
- addObjects(DesignRuleViolation[]) - Method in interface nxopen.routing.DesignRuleViolation
-
Add an object in violation to the violation
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- addObjects(Tag, int, Tag[]) - Method in interface nxopen.uf.UFSket
-
- addObjectsToDeleteList(TaggedObject[]) - Method in interface nxopen.Update
-
Adds objects to the global delete list.
- addObjectsToReferenceSet(NXObject[]) - Method in interface nxopen.ReferenceSet
-
Addition of objects to reference set
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- AddObjectsToRegionBuilder - Interface in nxopen.drawings
-
- addObjectType(String) - Method in interface nxopen.cae.DurSpecialistSimulationObjectTable
-
- addOffset() - Method in interface nxopen.features.CurveFinderBuilder
-
Adds offset relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- addOffset() - Method in interface nxopen.features.WrapGeometryBuilder
-
Returns the Additional offset.
- addOffset() - Method in interface nxopen.sim.SinumerikCaSimplifyBodiesBuilder
-
Returns the Additional offset.
- addOffset - Variable in class nxopen.uf.UFModl.WrapAssem
-
- addOffset - Variable in class nxopen.uf.UFModl.WrapGeom
-
- addOffset2dComponent() - Method in interface nxopen.features.CurveFinderBuilder
-
Adds offset 2d component relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- addOffsetSketchGroup() - Method in interface nxopen.features.CurveFinderBuilder
-
Adds offset sketch group relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- addOkayHandler(DialogItem.Okay, boolean) - Method in interface nxopen.uistyler.DialogItem
-
Registers ok callback.
- addOkHandler(BlockDialog.Ok) - Method in interface nxopen.blockstyler.BlockDialog
-
Adds Ok callback handler to the dialog.
- ADDON - Static variable in class nxopen.tooling.ScrapDesignBuilder.Body
-
Add-on operation
- addonOperation() - Method in interface nxopen.tooling.ScrapDesignBuilder
-
Returns the add-on operation, which includes overlap, overcut, trimming and user defined
License requirements: None.
- addOperation(NXObject[]) - Method in interface nxopen.mechatronics.SystemObject
-
Adds operation object.
- addOptionalCreationNonKeyAttrsToChosenAttrs(FamilyAttribute) - Method in interface nxopen.partfamily.TemplateManager
-
Add all optional creation non key attributes to chosen list at the end or after a selected attribute from chosen attribute list.
- addOrModifyNodeMap(FENode, Point) - Method in interface nxopen.cae.MorphRevolvedMeshBuilder
-
Add or modify node to point mapping
License requirements: nx_masterfem ("Finite Element Modeling")
.
- addOrthographicView(Tag, Tag, UFDraw.ProjDir, double[]) - Method in interface nxopen.uf.UFDraw
-
- addPageSwitchHandler(DialogItem.PageSwitch, boolean) - Method in interface nxopen.uistyler.DialogItem
-
Registers switch callback.
- addPairClearanceZone(DisplayableObject, DisplayableObject, Expression) - Method in interface nxopen.assemblies.ClearanceAnalysisBuilder
-
Add a Clearance Zone between a pair of objects.
- addParallel() - Method in interface nxopen.features.CurveFinderBuilder
-
Adds parallel relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- addParallel2dComponent() - Method in interface nxopen.features.CurveFinderBuilder
-
Adds parallel 2d component relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- addParallelSketchGroup() - Method in interface nxopen.features.CurveFinderBuilder
-
Adds parallel sketch group relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- addParameterList(GanttOperationParameterBuilder[]) - Method in interface nxopen.mechatronics.GanttOperationBuilder
-
Sets the parameter data
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- addParentNewPart(String, int, boolean) - Method in interface nxopen.tooling.FastenerAssy
-
Adds new part for the parent node
License requirements: None.
- addPart(String) - Method in interface nxopen.features.shipdesign.PlatePreparationBuilder
-
Add the part to the collection of parts to be unformed and scaled.
- addPart(String) - Method in interface nxopen.features.shipdesign.ShipFlatPatternBuilder
-
- addPart(String) - Method in interface nxopen.mfg.am.BuildTray
-
Adds a part to the build tray by file name
License requirements: am_pb_cam_basic ("Basic NX Powder Bed Additive Manufacturing Application")
.
- addPart(Part) - Method in interface nxopen.mfg.am.BuildTray
-
Adds a part to the build tray
License requirements: am_pb_cam_basic ("Basic NX Powder Bed Additive Manufacturing Application")
.
- addPart(String) - Method in interface nxopen.uf.UFClone
-
- addPartAs3dHarness(Part) - Method in interface nxopen.formboard.FormboardManager
-
Sets the input part as the part containing the potential harnesses to flatten.
- addPartAttachment(IssueAttachment) - Method in interface nxopen.issue.IssueBriefcaseSynchronizeBuilder
-
Adds an part type
IssueAttachment
,
only the added parts can be synchronized to server.
- addPartClosedHandler(PartCollection.PartClosedHandler) - Method in interface nxopen.PartCollection
-
Registers a user defined method that is called whenever a part is in the process of being closed
License requirements: None.
- addPartCreatedHandler(PartCollection.PartCreatedHandler) - Method in interface nxopen.PartCollection
-
Registers a user defined method that is called whenever a new part is created
License requirements: None.
- addPartModifiedHandler(PartCollection.PartModifiedHandler) - Method in interface nxopen.PartCollection
-
Registers a user defined method that is called whenever a part is modified
License requirements: None.
- addPartOccurance(Component) - Method in interface nxopen.tooling.AddReusablePart
-
Adds occurance into the part data
License requirements: None.
- addPartOpenedHandler(PartCollection.PartOpenedHandler) - Method in interface nxopen.PartCollection
-
Registers a user defined method that is called whenever a part is opened
License requirements: None.
- addPartRenamedHandler(PartCollection.PartRenamedHandler) - Method in interface nxopen.PartCollection
-
Registers a user defined method that is called whenever a part is renamed
License requirements: None.
- addParts(String[]) - Method in interface nxopen.pdm.PartOperationImportBuilder
-
Add parts to import
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- addPartSavedAsHandler(PartCollection.PartSavedAsHandler) - Method in interface nxopen.PartCollection
-
Registers a user defined method that is called whenever a part is saved as a specified name
License requirements: None.
- addPartSavedHandler(PartCollection.PartSavedHandler) - Method in interface nxopen.PartCollection
-
Registers a user defined method that is called whenever a part is saved
License requirements: None.
- addPartsFromFolder(String) - Method in interface nxopen.pdm.PartOperationImportBuilder
-
Add parts to import from selected folder
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- addPartsUsingLogFile(String) - Method in interface nxopen.pdm.PartOperationImportBuilder
-
Add parts using log file either clone log file or import log file
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- addPartToAssembly(Tag, String, String, String, double[], double[], int) - Method in interface nxopen.uf.UFAssem
-
- AddPartToAssemblyData() - Constructor for class nxopen.uf.UFAssem.AddPartToAssemblyData
-
- addPassenger(BaseDataPassengerBuilder) - Method in interface nxopen.features.vehicledesign.BaseDataBuilder
-
- addPendingComponent(String, NXObject, String, String, Point3d, Matrix3x3, int, boolean) - Method in interface nxopen.assemblies.ComponentAssembly
-
- addPhysicsObjects(NXObject[]) - Method in interface nxopen.mechatronics.SystemObject
-
Adds behavioral physics objects.
- addPipeJointSetType(CustomManager.PipeJointSetType) - Method in interface nxopen.weld.CustomManager
-
Registers a user defined method that is called whenever a welding joint is created
License requirements: None.
- addPlanarFaceData(Face) - Method in interface nxopen.tooling.EnlargeSurfaceBuilder
-
Initializes the planar face data with face, and adds the data to builder.
- addPmiDimension(DimensionData, PmiData, Point3d, boolean) - Method in interface nxopen.annotations.DimensionSet
-
Adds a PMI dimension to the PMI dimension set.
- addPmiDimension(DimensionData, PmiData, Xform, Point3d, boolean) - Method in interface nxopen.annotations.DimensionSet
-
Adds a PMI dimension to the PMI dimension set.
- addPMILabel(NXObject) - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder
-
Add a PMI label in specified position to represent the deviation value.
- addPmiView(String) - Method in interface nxopen.annotations.PmiFilterByView
-
Add a model view to the filter.
- addPoint(String, Point3d) - Method in interface nxopen.DataContainer
-
Adds the point value in the container.
- addPoint(OnPathDimensionBuilder) - Method in interface nxopen.geometricutilities.AlignmentMethodBuilder
-
Insert a given point, and create corresponding points on other sections.
- addPoint(Point3d) - Method in interface nxopen.tooling.ReusePositioningObjectBuilder
-
Create a point, then add it to sketch
License requirements: None.
- addPointExitHandler(CustomManager.PointExitHandler) - Method in interface nxopen.weld.CustomManager
-
Registers a user defined method to be notified when weld point features are created.
- addPointOnEdgeChainData(Edge[], double, boolean, double, double, double, Point, boolean) - Method in interface nxopen.features.EdgeBlendBuilder
-
Add a point on edge chain data to the edge blend
License requirements: solid_modeling ("SOLIDS MODELING")
.
- addPointOnNonPlanar(Point3d) - Method in interface nxopen.tooling.ReusePositioningObjectBuilder
-
Create a point on the non-planar face/curve
License requirements: None.
- addPoints(Point[]) - Method in interface nxopen.cae.connections.PointSeriesLocation
-
Add location nodes.
- addPoints() - Method in interface nxopen.tooling.ReusePositioningObjectBuilder
-
Adds points to sketch
License requirements: None.
- addPort(Port) - Method in interface nxopen.routing.LogicalTerminal
-
Add a physical
Port
to the
terminal.
- addPostCommitCallback(PartOperationImportObserver.PostCommitCb) - Method in interface nxopen.pdm.PartOperationImportObserver
-
Registers a user defined PostCommit callback that is called after commit of import operation
License requirements: None.
- addPostcopyoperationCallback(SaveAsReviseObserver.PostcopyoperationCb) - Method in interface nxopen.pdm.SaveAsReviseObserver
-
Registers a user defined postcopyoperation callback that is called just before SaveAs and Revise process
License requirements: None.
- addPostUpdateHandler(CustomFeatureClass.PostUpdateCallback) - Method in interface nxopen.features.CustomFeatureClass
-
Registers the custom feature post update callback.
- addPostureLib(String) - Method in interface nxopen.features.HumanBuilder
-
Add posture library
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- addPreAutoassignCallback(PartOperationImportObserver.PreAutoassignCb) - Method in interface nxopen.pdm.PartOperationImportObserver
-
Registers a user defined PreAutoAssign callback that is called before auto-assigning attributes
License requirements: None.
- addPreCommitCallback(PartOperationImportObserver.PreCommitCb) - Method in interface nxopen.pdm.PartOperationImportObserver
-
Registers a user defined PreCommit callback that is called before commit of import operation
License requirements: None.
- addPrecopyoperationCallback(SaveAsReviseObserver.PrecopyoperationCb) - Method in interface nxopen.pdm.SaveAsReviseObserver
-
Registers a user defined precopyoperation callback that is called just before SaveAs and Revise process
License requirements: None.
- addPrerequisite(SimSolution) - Method in interface nxopen.cae.SimSolution
-
Adds a prerequisite to the solution
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- addPreUpdateHandler(CustomFeatureClass.PreUpdateCallback) - Method in interface nxopen.features.CustomFeatureClass
-
Registers the custom feature pre update callback.
- addPreviewControlPoint(Point3d) - Method in interface nxopen.routing.LinearPathBuilder
-
Add a new control point to the path.
- addProductAssemblyPart(String) - Method in interface nxopen.uf.UFUgmgr
-
- addProductInterface(NXObject) - Method in interface nxopen.assemblies.productinterface.ObjectBuilder
-
Adds an object to the product interface; currently supported types are expressions and geometry.
- AddProductInterfaceData() - Constructor for class nxopen.assemblies.productinterface.ObjectBuilder.AddProductInterfaceData
-
- addProductInterfaceObject(NXObject) - Method in interface nxopen.assemblies.productinterface.ObjectBuilder
-
Adds an object to the product interface; currently supported types are expressions and geometry
License requirements: None.
- addProductInterfaceObject1(NXObject, String, String, boolean) - Method in interface nxopen.assemblies.productinterface.ObjectBuilder
-
Adds an object to the product interface; currently supported types are expressions and geometry
License requirements: None.
- addProductInterfaceObject2(NXObject, String, String, boolean, InterfaceObject.InterfaceUsageType) - Method in interface nxopen.assemblies.productinterface.ObjectBuilder
-
Adds an object to the product interface; currently supported types are expressions and geometry.
- addProfile() - Method in interface nxopen.mfg.am.ProfileLibrary
-
Adds a New Profile Object
License requirements: None.
- addProjectFeatureCurves(Curve) - Method in interface nxopen.ConvertToFromReferenceBuilder
-
Adds all output entities belonging to the project feature that contains the input tag
to the input objects list of the command.
- addProperty(CustomAttribute.Property) - Method in interface nxopen.features.CustomAttribute
-
The custom attribute add property
License requirements: solid_modeling ("SOLIDS MODELING")
.
- addRadialPivot(Point3d, int, double) - Method in interface nxopen.formboard.ShapeSegmentBuilder
-
License requirements: routing_harness ("Routing Harness")
.
- addRaft() - Method in interface nxopen.Print3dBuilder
-
Returns the raft printing for the 3d print
License requirements: None.
- addRailingToggle() - Method in interface nxopen.linedesigner.PlatformEquipmentBuilder
-
Returns the railing toggle to check railing is prsent for platform or not
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- addRangeFromDepth(double, double, CutLevel.MeasureTypes, int) - Method in interface nxopen.cam.CutLevel
-
Add a new range by specifying the range depth
License requirements: cam_base ("CAM BASE")
.
- addRangeFromGeometry(NXObject, double) - Method in interface nxopen.cam.CutLevel
-
Add a new range by specifying the level geometry
License requirements: cam_base ("CAM BASE")
.
- addRealParameter(String, double, Unit, boolean, boolean) - Method in interface nxopen.mechatronics.ParameterStockBuilder
-
Adds Real parameter.
- addRefSetMembers(Tag, int, Tag[]) - Method in interface nxopen.uf.UFAssem
-
- addRegionPoint(Point3d) - Method in interface nxopen.features.shipdesign.PlateBuilder
-
Adds a region point.
- addRelatedInterfaceTerminal(InterfaceTerminalShadow) - Method in interface nxopen.routing.InterfaceTerminalRelationshipBase
-
- addRelatedPartsToCopy(BasePart, BasePart[], String[], PartOperationBuilder.OperationType) - Method in interface nxopen.pdm.PartOperationCopyBuilder
-
Add related part to the part undergoing an operation.
- addRelatedPartToOperate(BasePart, BasePart[], String[], PartOperationBuilder.OperationType) - Method in interface nxopen.pdm.PartOperationBuilder
-
- addRelatedSingleDevice(SingleDevice) - Method in interface nxopen.routing.DeviceRelationship
-
- addRemovalHoleIndex(int) - Method in interface nxopen.tooling.FastenerAssy
-
Add the removal hole index in the fastener setup data
License requirements: None.
- AddRemoveBoxViewBuilder - Interface in nxopen.drawings
-
- AddRemoveBoxViewBuilder.ModeType - Class in nxopen.drawings
-
Mode type
- addRequest(PenetrationRequest) - Method in interface nxopen.features.shipdesign.PenetrationAssociationBuilder
-
Adds request object
License requirements: nx_penetration_mgmt ("Penetration Management")
.
- addResponse(String, boolean) - Method in interface nxopen.PartCloseResponses
-
Add a response to the list.
- address - Variable in class nxopen.mechatronics.ProfinetClientBuilder.TagInfo
-
Adress value
- address - Variable in class nxopen.mechatronics.SHMSignalProviderBuilder.SignalInfo
-
Adress value
- address - Variable in class nxopen.mechatronics.SymbolTableBuilder.Symbol
-
Address
- AddressObjectIotype - Class in nxopen.ame
-
Definition of the Address Object I/O types
See Xml node IoType
- addReusableFeature() - Method in interface nxopen.tooling.ToolingManager
-
Returns the AddReusableFeatureCollection instance belonging to this part .
- AddReusableFeatureBuilder - Interface in nxopen.tooling
-
- AddReusableFeatureBuilder.LayerOptionType - Class in nxopen.tooling
-
Represents the layer option type
- AddReusableFeatureBuilder.UserExpressionsData - Class in nxopen.tooling
-
- AddReusableFeatureCollection - Interface in nxopen.tooling
-
Represents a collection of AddReusableFeature
To obtain an instance of this class, refer to
ToolingManager
Created in NX7.5.0
- AddReusableFeatureCollection.InputData - Class in nxopen.tooling
-
Defines the input data of AddReusableFeatureBuilder
- AddReusablePart - Interface in nxopen.tooling
-
- AddReusablePart.ComponentMode - Class in nxopen.tooling
-
Represents the component type of the added part
- AddReusablePart.ModeMethod - Class in nxopen.tooling
-
Represents adding or editing a reusable component mode method
- AddReusablePart.PocketBodyMethod - Class in nxopen.tooling
-
Represents save pocket body information, updating or deleting a pocket body size mode method
- AddReusablePart.PositionMethod - Class in nxopen.tooling
-
Represents the position method
- AddReusablePartCollection - Interface in nxopen.tooling
-
Represents a collection of AddReusablePart
To obtain an instance of this class, refer to
Part
Created in NX5.0.0
- addRightRailing() - Method in interface nxopen.linedesigner.DBStairwayEquipmentNode
-
An API to add right railing to stairway
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- addRightRailingToggle() - Method in interface nxopen.linedesigner.StairwayEquipmentBuilder
-
Returns the right railing toggle
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- addRiserToggle() - Method in interface nxopen.linedesigner.StairwayEquipmentBuilder
-
Returns the riser toggle
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- addRoomAndPurpose(String, String) - Method in interface nxopen.features.shipdesign.RoomContainerBuilder
-
The room and purpose
License requirements: nx_ship_gen_arrange ("Ship General Arrangement") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- addRootNode(String, TaggedObject[]) - Method in interface nxopen.shipdesign.NavigatorView
-
Adds a root object to the navigator to represent the object.
- addRow(Tag, Tag, int) - Method in interface nxopen.uf.UFTabnot
-
- addRowScalarFieldTable(String) - Method in interface nxopen.BasePropertyTable
-
Add row operation for scalar field table
License requirements: None.
- addRule() - Method in interface nxopen.ame.ReportsSettingsBuilder
-
Add new report rule
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- addRules(FacetSelectionRule[]) - Method in interface nxopen.FacetCollector
-
Adds the input rules to collector and collector updates itself with new set of facets.
- addRuns(Run[]) - Method in interface nxopen.routing.RoutingSystem
-
Adds
Run
objects to a RoutingSystem
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
Created in NX4.0.0
- addScreenSizeFitHandler(UserDefinedClass.DisplayCallback) - Method in interface nxopen.userdefinedobjects.UserDefinedClass
-
Registers the screen size fit callback.
- addScrewArray(String, String, String, String, String, int, FastenerAssy.StackTypeMethod) - Method in interface nxopen.tooling.FastenerAssy
-
Adds stack array
License requirements: None.
- addSearchLibrary(String) - Method in interface nxopen.uf.UFKf
-
- addSearchTermBuilder(SearchTermBuilder) - Method in interface nxopen.assemblies.SubsetRecipe
-
- addSection(int, Section) - Method in interface nxopen.geometricutilities.AlignmentMethodBuilder
-
Add a section at the given index among existing sections.
- addSectionData(double[], double[], double[], double) - Method in interface nxopen.cae.ftk.ComplexSectionBasedMatrixRecord
-
Adds the complex data values for each section.
- addSectionData(double[], double[], double) - Method in interface nxopen.cae.ftk.RealSectionBasedMatrixRecord
-
Adds the real data values for each section.
- addSectionView() - Method in interface nxopen.tooling.AssemblyDrawingBuilder
-
The option for add section view
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- addSeedEdge(CAEVertex, CAEEdge) - Method in interface nxopen.cae.EdgePathMethod
-
- addSeedEdge(CAEVertex, CAEEdge, boolean, boolean, double) - Method in interface nxopen.cae.EdgePathMethod
-
Add seed (start vertex and edge) to the end of the path.
- addSeedEdge(FENode, FEElemEdge) - Method in interface nxopen.cae.ElemEdgePathMethod
-
- addSeedEdge(FENode, FEElemEdge, boolean, boolean, boolean, double, boolean, double) - Method in interface nxopen.cae.ElemEdgePathMethod
-
Add seed (start vertex and edge) to the end of the path.
- addSegments(Curve[]) - Method in interface nxopen.routing.Stock
-
Adds new segments to this object.
- addSegmentsToList(ISegment[]) - Method in interface nxopen.routing.IPath
-
Adds segment(s) to an IPath object.
- addSegmentToStock(Tag, Tag) - Method in interface nxopen.uf.UFRoute
-
- addSelectedCurve(Body) - Method in interface nxopen.features.shipdesign.PenetrationAssociationBuilder
-
Adds selected curves
License requirements: nx_penetration_mgmt ("Penetration Management")
.
- addSelectedPointPairs() - Method in interface nxopen.cae.FaceFromBoundaryBuilder
-
Designate the join of the first and second pt by a straight edge (joining the ends of open loop segments).
- addSelectFace(Body) - Method in interface nxopen.tooling.AssignPatchBuilder
-
Add selected face to select list.
- addSelectionHandler(UserDefinedClass.DisplayCallback) - Method in interface nxopen.userdefinedobjects.UserDefinedClass
-
Registers the UDO selection callback.
- addSeparator() - Method in interface nxopen.blockstyler.TreeListMenu
-
Adds a separator
License requirements: None.
- addSeparator(int) - Method in interface nxopen.menubar.ContextMenu
-
Adds a separator to the context menu.
- addSeperator() - Method in interface nxopen.blockstyler.TreeListMenu
-
- addSequencingView(Tag) - Method in interface nxopen.uf.UFAssem
-
- addSetbackData(Edge[], boolean[], String[]) - Method in interface nxopen.features.EdgeBlendBuilder
-
Add an edge blend setback data for an edge in the edge blend
License requirements: solid_modeling ("SOLIDS MODELING")
.
- addSharedParts(Part[]) - Method in interface nxopen.features.shipdesign.ProjectSetupBuilder
-
Add shared parts
License requirements: nx_ship_gen_arrange ("Ship General Arrangement") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- addSheet() - Method in interface nxopen.cam.WorkInstructionBuilder
-
Add a Work Instruction sheet
License requirements: nx_wi_authoring (" NX Work Instruction Authoring")
.
- addSheetName() - Method in interface nxopen.drawings.ViewSettingsBuilder
-
Returns the add sheet name
License requirements: None.
- addSheetNumber() - Method in interface nxopen.drawings.ViewSettingsBuilder
-
Returns the add sheet number
License requirements: None.
- addSidelobes - Variable in class nxopen.cae.AfuMathFastRMSInfo.Data
-
the add sidelobes option
- addSignalAdapters(NXObject[]) - Method in interface nxopen.mechatronics.SystemObject
-
Adds signal adapter objects.
- addSimEnd(IsvControlPanelBuilder.SimEndCb) - Method in interface nxopen.sim.IsvControlPanelBuilder
-
Registers the SimEnd callback.
- addSimStop(IsvControlPanelBuilder.SimStopCb) - Method in interface nxopen.sim.IsvControlPanelBuilder
-
Registers the SimStop callback.
- addSingleDeviceChild(SingleDevice) - Method in interface nxopen.routing.AssemblyDefinition
-
Adds a
SingleDevice
object to the list of objects contained in the assembly.
- addSlackToSpline(SplinePathBuilder.SplinePathSlackType, Expression, Direction) - Method in interface nxopen.routing.SplinePathBuilder
-
License requirements: routing_base ("Routing Basic")
.
- addSmartPoint(Point, double) - Method in interface nxopen.Section
-
- addSplinePoint(Point3d) - Method in interface nxopen.formboard.ShapeSegmentBuilder
-
Adds a point to the existing spline.
- addSplitPoint(Point3d, DisplayableObject) - Method in interface nxopen.features.subdivision.SubdivisionSplitFaceBuilder
-
Add split face point.
- addStandardFont(Tag, String) - Method in interface nxopen.uf.UFUgfont
-
- addStandardPart() - Method in interface nxopen.features.shipdesign.StandardPartFrameworkBuilder
-
Adds a standard part into the assembly context, restores the broken wave links and renames the standard
part when all external references are defined.
- addStandardPunchInsert() - Method in interface nxopen.tooling.PunchInsertBuilder
-
Add standard punch insert by invoking standard part management dialog
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- addStatementIndexes(int, int, int) - Method in interface nxopen.ame.PlcMethodBuilder
-
Add a index of start statment in a network and index of end of statment
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- addStep(SimSolutionStep) - Method in interface nxopen.cae.SimSolution
-
Adds a step to the solution
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- addStock(CharacteristicList, CharacteristicList, ISegment[], String) - Method in interface nxopen.routing.StockCollection
-
Creates stock on the given segments.
- addStock(CharacteristicList, CharacteristicList, ISegment[], String, boolean) - Method in interface nxopen.routing.StockCollection
-
Creates normal or space reservation stock on the given segments.
- addStock(CharacteristicList, CharacteristicList, ISegment[], String, boolean, String) - Method in interface nxopen.routing.StockCollection
-
Creates normal or space reservation stock on the given segments.
- addStopshortData(Edge, boolean, String) - Method in interface nxopen.features.EdgeBlendBuilder
-
- addString(String, String) - Method in interface nxopen.DataContainer
-
Adds the string value in the container.
- addStringerToggle() - Method in interface nxopen.linedesigner.StairwayEquipmentBuilder
-
Returns the stringer toggle
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- addStringParameter(String, String, boolean, boolean) - Method in interface nxopen.mechatronics.ParameterStockBuilder
-
Adds String parameter.
- addStrings(String, String[]) - Method in interface nxopen.DataContainer
-
Adds the strings value in the container.
- addStringToOcfData(Tag, int, int, UFCurve.OcfValues[], UFCurve.OcfData) - Method in interface nxopen.uf.UFCurve
-
- addStripperInsert() - Method in interface nxopen.tooling.PiercingInsertBuilder
-
Add standard stripper insert.
- addStructuresByRule(Component[]) - Method in interface nxopen.features.shipdesign.SelectStructuresBuilder
-
Adds ship structures to the view
License requirements: nx_ship_drafting ("Ship Drafting")
.
- addSubfolder(SimLbcFolder) - Method in interface nxopen.cae.SimLbcFolder
-
Add a child folder
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- AddSubmechanismBuilder - Interface in nxopen.motion
-
Represents a builder class that performs add submechanism in current context.
- AddSubmechanismBuilder.Layer - Class in nxopen.motion
-
Represents initial location type that can be present during add component
- addSubmenu(String, int) - Method in interface nxopen.menubar.ContextMenu
-
Adds a submenu to the context menu.
- addSupport() - Method in interface nxopen.Print3dBuilder
-
Returns the support printing for 3d print
License requirements: None.
- addSuppressedObject(NXObject) - Method in interface nxopen.motion.MotionSolution
-
Adds a suppressed object to a solution
License requirements: mechanisms ("MECHANISMS")
.
- addSuppressedObjectForAllSolutions(Part, NXObject) - Method in interface nxopen.motion.MotionSimulation
-
Deactivates a motion object for all solutions
License requirements: mechanisms ("MECHANISMS")
.
- addSuppressHandler(UserDefinedClass.GenericCallback) - Method in interface nxopen.userdefinedobjects.UserDefinedClass
-
Registers the suppress callback.
- addSurfaceData(Face) - Method in interface nxopen.tooling.EnlargeSurfaceBuilder
-
Initializes the surface data with face, and adds the data to builder.
- AddSurfBuilder - Interface in nxopen.die
-
- AddSurfBuilder.Methods - Class in nxopen.die
-
Settings for the type of addendum surface being created.
- addSwitchHandler(TabControl.SwitchHandler, boolean) - Method in interface nxopen.uistyler.TabControl
-
Registers switch callback.
- addSxlineSxseg(Tag, UFDraw.SxsegType, UFDraw.SxlineLeg, UFDrf.Object) - Method in interface nxopen.uf.UFDraw
-
- addSxseg(Tag, UFDraw.SxlineSxsegs) - Method in interface nxopen.uf.UFDraw
-
- addSymbol(Point3d) - Method in interface nxopen.annotations.ForeshorteningSymbolBuilder
-
Add the foreshortening symbol
License requirements: None.
- addSymbol(NXObject, String, int, int) - Method in interface nxopen.annotations.TextWithSymbolsBuilder
-
Adds a symbol
License requirements: drafting ("DRAFTING")
.
- addSymbolToObject(UFDrf.SymbolCreateData, Tag) - Method in interface nxopen.uf.UFDrf
-
- addSymmetric(int) - Method in interface nxopen.features.CurveFinderBuilder
-
Add symmetric relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- addSystemClass(KinematicComponentBuilder.SystemClass) - Method in interface nxopen.sim.KinematicComponentBuilder
-
Add a system class
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder") OR resource_manager_nx ("Teamcenter Resource Manager")
.
- addTable(int, int) - Method in interface nxopen.openxml.DocumentDataGroup
-
- addTable(int, int) - Method in interface nxopen.report.ResultXmlFileWriter
-
- addTaggedObject(String, TaggedObject) - Method in interface nxopen.DataContainer
-
Adds the tagged object in the container.
- addTaggedObjectVector(String, TaggedObject[]) - Method in interface nxopen.DataContainer
-
Adds the tagged object vector in the container.
- addTagIntPairSourceEntity(NXObject, int) - Method in interface nxopen.features.TrackingData
-
Adds the source entity of NXOpen::Object - integer pair type for tracked entity
License requirements: solid_modeling ("SOLIDS MODELING")
.
- addTags() - Method in interface nxopen.mechatronics.OPCClientBuilder
-
Add item to the list.
- addTagSourceEntities(NXObject[]) - Method in interface nxopen.features.TrackingData
-
Adds the source entities of NXOpen::Object's type for tracked entity
License requirements: solid_modeling ("SOLIDS MODELING")
.
- addTangent() - Method in interface nxopen.features.CurveFinderBuilder
-
Adds tangent relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- addTangent - Variable in class nxopen.uf.UFModl.RipedgeData
-
- addTangent2dComponent() - Method in interface nxopen.features.CurveFinderBuilder
-
Adds tangent 2d component relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- addTangentFaces() - Method in interface nxopen.features.FaceBlendBuilder
-
Returns the option for Add Tangent Faces As Encountered
License requirements: None.
- addTangentSketchGroup() - Method in interface nxopen.features.CurveFinderBuilder
-
Adds tangent sketch group relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- addTarget(Body) - Method in interface nxopen.features.TrimBodyBuilder
-
Adds a target body during create.
- addTarget(NXObject) - Method in interface nxopen.routing.RouteLogicalAssociation
-
Adds target to Logical Assocition
License requirements: routing_harness ("Routing Harness")
.
- addTargetBody(NXObject, NXObject) - Method in interface nxopen.tooling.ReusablePocketBuilder
-
Adds target body.
- addTerminalPorts(TerminalPort[]) - Method in interface nxopen.routing.MultiPort
-
- addTerminalPorts(Tag, int, Tag[]) - Method in interface nxopen.uf.UFRoute
-
- addTerminateCallback(PartOperationImportObserver.TerminateCb) - Method in interface nxopen.pdm.PartOperationImportObserver
-
Registers a user defined Terminate callback that is called during destruction of import builder
License requirements: None.
- addText(String) - Method in interface nxopen.openxml.DocumentDataGroup
-
- addText(String) - Method in interface nxopen.openxml.TableCellData
-
- addText(String) - Method in interface nxopen.report.ResultXmlFileWriter
-
- addTextString(String) - Method in interface nxopen.display.TransientText
-
Adds a text string to the TransientText object.
- addtextvalue(MultiValueObjectsPort.JaAmeValueObjectUsageType, String[]) - Method in interface nxopen.ame.InterfaceMemberPort
-
Add text value
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- addThruFaces(Tag, int, Tag[]) - Method in interface nxopen.uf.UFModeling
-
- AddTicBuilder - Interface in nxopen.annotations
-
- addToChangeover() - Method in interface nxopen.tooling.ChangeoverManagementBuilder
-
Add selected components to the selected changeover.
- addToChosenAttributes(String[], FamilyAttribute.AttrType[], int) - Method in interface nxopen.partfamily.TemplateManager
-
Adds new attributes to chosen attributes list of a part family
License requirements: solid_modeling ("SOLIDS MODELING")
.
- addToClassSel(int) - Method in interface nxopen.uf.UFUi
-
- addToCset(Tag, Tag, boolean) - Method in interface nxopen.uf.UFAssem
-
- addToDeleteList(NXObject[]) - Method in interface nxopen.Update
-
- addToDeleteList(TaggedObject) - Method in interface nxopen.Update
-
Adds an object to the global delete list.
- addToDieData(Curve[]) - Method in interface nxopen.die.Tip
-
Adds the input curves to the die data.
- addToDimension(int, int, int[], int, int, int, int, int, String[]) - Method in interface nxopen.uf.UFDrf
-
- addToFolder(Tag, Tag) - Method in interface nxopen.uf.UFUgmgr
-
- addToMap(TaggedObject, TaggedObject) - Method in interface nxopen.LinkedMirrorPartEntityMapData
-
Add a map between an entity in the source part and an entity in the mirror part
License requirements: None.
- addToMaterialLibraryToggle() - Method in interface nxopen.PhysicalMaterialBuilder
-
Returns the add_to_material_library_toggle value.
- addToolComponent(NXObject) - Method in interface nxopen.tooling.ReusablePocketBuilder
-
Adds tool component.
- addToPartitions(Partition[]) - Method in interface nxopen.assemblies.DesignElementBuilder
-
Specify partitions to which the design elements will be added.
- addToPlotLayout() - Method in interface nxopen.PlotBuilder
-
Add Plot to Layout.
- addTopNode(Point3d, Point3d, NXObject, int) - Method in interface nxopen.tooling.FastenerAssy
-
Adds top node for the fastener assembly
License requirements: None.
- addToRecentFileList(Tag) - Method in interface nxopen.uf.UFPart
-
- addToScopedObjectSet(NXObject, RunItem.Type) - Method in interface nxopen.routing.AssignPathBuilder
-
Add the given object to the scoped object set
License requirements: routing_base ("Routing Basic")
.
- addToSection(SelectionIntentRule[], NXObject, NXObject, NXObject, Point3d, Section.Mode) - Method in interface nxopen.Section
-
Adds selection intent rules to the section.
- addToSection(SelectionIntentRule[], NXObject, NXObject, NXObject, Point3d, Section.Mode, boolean) - Method in interface nxopen.Section
-
Adds selection intent rules to the section with the option of restricting
chaining and limit discovery to a single feature.
- addToSelectedBCsList(SimBC[]) - Method in interface nxopen.cae.BCSelectionDisplayBuilder
-
Add BCs to the Selected BCs List
License requirements: None.
- addToSelectionList(SelectionHandle, NXObject[], boolean) - Method in interface nxopen.Selection
-
- addToSelList(UFVariant, int, Tag[], boolean) - Method in interface nxopen.uf.UFUi
-
- addToSolutionNx(int, Tag) - Method in interface nxopen.uf.UFSf
-
- addToStepNx(int, Tag) - Method in interface nxopen.uf.UFSf
-
- addToTaggedObjectsSelectionList(SelectionHandle, TaggedObject[], boolean) - Method in interface nxopen.Selection
-
Add objects to the selection list.
- addToTerminal(LogicalTerminal) - Method in interface nxopen.routing.LogicalConnection
-
- addToViewSet(Tag, UFView.StandardOrientation) - Method in interface nxopen.uf.UFView
-
- addUde(String, CamPathToolpathEventLocation, PathEvent) - Method in interface nxopen.cam.Path
-
Add a helix move at location, if location is end location(append)
then the reference is not relevant
License requirements: None.
- addUnitEffectivity(int, int) - Method in interface nxopen.EffectivityConditionBuilder
-
Adds specified discrete or range effectivity values to the builder.
- addUnitEffectivity(int, EffectivityConditionBuilder.ToUnitType) - Method in interface nxopen.EffectivityConditionBuilder
-
Adds specified range effectivity value to the builder.
- addUpdateHandler(BlockDialog.Update) - Method in interface nxopen.blockstyler.BlockDialog
-
Adds Update callback handler to the dialog.
- addUpdateHandler(UserDefinedFeatureClass.UpdateCallback) - Method in interface nxopen.features.UserDefinedFeatureClass
-
Registers the udf update callback.
- addUpdateHandler(UserDefinedClass.LinkCallback) - Method in interface nxopen.userdefinedobjects.UserDefinedClass
-
Registers the update callback.
- addUserClassification(String) - Method in interface nxopen.sim.KinematicConfigurator
-
Adds a new user class name to the list of user classes
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- addUserClassName(String) - Method in interface nxopen.sim.KinematicComponentBuilder
-
Adds a user class to the component
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- addUserInput(CommandBuilder.UserInputLocation, UserInput.Type) - Method in interface nxopen.report.CommandBuilder
-
Adds an user input and adds it to command.
- addUtilityFunctionVisibilityHandler(UI.UtilityFunctionVisibilityHandler) - Method in interface nxopen.UI
-
Registers a user defined method that is called whenever an utility function state changes.
- addValueChangedHandler(ColorTool.ValueChanged, boolean) - Method in interface nxopen.uistyler.ColorTool
-
Registers value change callback.
- addValueChangedHandler(IntegerScale.ValueChanged, boolean) - Method in interface nxopen.uistyler.IntegerScale
-
Registers value change callback.
- addValueChangedHandler(OptionToggle.ValueChanged, boolean) - Method in interface nxopen.uistyler.OptionToggle
-
Registers value change callback.
- addValueChangedHandler(RadioBox.ValueChanged, boolean) - Method in interface nxopen.uistyler.RadioBox
-
Registers value change callback.
- addValueChangedHandler(RealScale.ValueChanged, boolean) - Method in interface nxopen.uistyler.RealScale
-
Called when a dialog user moves the slider up and down the scale.
- addValueChangedHandler(Toggle.ValueChanged, boolean) - Method in interface nxopen.uistyler.Toggle
-
Registers value change callback.
- addVariableBevelHandler(CustomManager.VariableBevelHandler) - Method in interface nxopen.weld.CustomManager
-
Registers a user defined method to define variable bevel angles.
- addVariablePointData(Edge, String, String, String, String, Point, boolean, boolean) - Method in interface nxopen.features.EdgeBlendBuilder
-
Add an edge blend variable radius data for an edge in the edge blend
License requirements: solid_modeling ("SOLIDS MODELING")
.
- addVariableRadiusData(Edge, double, String, Point, boolean) - Method in interface nxopen.features.EdgeBlendBuilder
-
- addVariableRadiusDataNew(Edge, String, String, Point, boolean) - Method in interface nxopen.features.EdgeBlendBuilder
-
Add an edge blend variable radius data for an edge in the edge blend
Note: This ja will always create arclength parameter
License requirements: solid_modeling ("SOLIDS MODELING")
.
- addVariableRadiusDataNew(Edge, String, String, Point, boolean, boolean) - Method in interface nxopen.features.EdgeBlendBuilder
-
Add an edge blend variable radius data for an edge in the edge blend
License requirements: solid_modeling ("SOLIDS MODELING")
.
- addVector(String, Vector3d) - Method in interface nxopen.DataContainer
-
Adds the vector value in the container.
- addVertexOnCurve() - Method in interface nxopen.features.CurveFinderBuilder
-
Adds vertex on curve relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- addVertexOnCurve2dComponent() - Method in interface nxopen.features.CurveFinderBuilder
-
Adds vertex on curve 2d component relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- addVertexOnCurveSketchGroup() - Method in interface nxopen.features.CurveFinderBuilder
-
Adds vertex on curve sketch group relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- addView(NXObject, String, String[]) - Method in interface nxopen.tooling.AssemblyDrawingBuilder
-
The option for add view
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- addViolationLocations(DesignRuleViolationLocation[]) - Method in interface nxopen.routing.DesignRuleViolation
-
This will add given number of violation location objects.
- addViolations(DesignRuleViolation[]) - Method in interface nxopen.routing.DesignRule
-
- addVirtualPorts(String[]) - Method in interface nxopen.routing.MultiPort
-
Adds new virtual ports to this
MultiPort
License requirements: routing_base ("Routing Basic")
Created in NX4.0.0
- addVirtualPorts(Tag, int, String[]) - Method in interface nxopen.uf.UFRoute
-
- addVncStatus(IsvControlPanelBuilder.VncStatusCb) - Method in interface nxopen.sim.IsvControlPanelBuilder
-
Registers the VNC Status callback.
- addWatermark() - Method in interface nxopen.PrintPDFBuilder
-
Returns the Add Watermark option.
- addWeldFaceDefinition() - Method in interface nxopen.cae.MeshControlBuilder
-
Create weld face definition
License requirements: nx_masterfem ("Finite Element Modeling")
.
- addWeldJointHandler(CustomManager.WeldJointHandler) - Method in interface nxopen.weld.CustomManager
-
Registers a user defined method that is called whenever a welding joint is created or updated
License requirements: None.
- addWorkPartChangedHandler(PartCollection.WorkPartChangedHandler) - Method in interface nxopen.PartCollection
-
Registers a method that is called whenever the work part changes
License requirements: None.
- addYCurves(GraphBuilder.CurveData[]) - Method in interface nxopen.motion.GraphBuilder
-
- Adhesive - Interface in nxopen.cae.connections
-
Adhesive connection.
- ADHESIVE - Static variable in class nxopen.cae.connections.ConnectionType
-
Adhesive
- ADJ - Static variable in class nxopen.cam.LaserControlPoint.ControlPointTypes
-
adj
- adjacencyTol() - Method in interface nxopen.STLCreator
-
Returns the adjacency tol - tolerance for adjacency
License requirements: None.
- adjacencyToleranceData() - Method in interface nxopen.drawings.ViewStyleSectionBuilder
-
Returns the adjacency tolerance on the SECTION tab of the View Style Dialog
License requirements: None.
- ADJACENT_ANGLE - Static variable in class nxopen.Sketch.AutoDimensioningRule
-
Create Adjacent Angles
- ADJACENT_EDGES - Static variable in class nxopen.features.NSidedSurfaceBuilder.FlowDirectionType
-
adjacent edges
- ADJACENT_EDGES - Static variable in class nxopen.geometricutilities.FlowDirection.Type
-
Adjacent Edges
- ADJACENT_FACES - Static variable in class nxopen.features.ExtractFaceBuilder.FaceOptionType
-
adjacent face type
- adjacentBlades() - Method in interface nxopen.cam.MillCutParameters
-
Returns the Adjacent Blades Stock Option Type
License requirements: None.
- adjacentBlend1() - Method in interface nxopen.features.StyledBlendBuilder
-
Returns the first adjacent blend
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- adjacentBlend1TrimEnd() - Method in interface nxopen.features.StyledBlendBuilder
-
Returns the trim end of the first adjacent blend
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- adjacentBlend1TrimStart() - Method in interface nxopen.features.StyledBlendBuilder
-
Returns the trim start of the first adjacent blend
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- adjacentBlend2() - Method in interface nxopen.features.StyledBlendBuilder
-
Returns the second adjacent blend
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- adjacentBlend2TrimEnd() - Method in interface nxopen.features.StyledBlendBuilder
-
Returns the trim end of the second adjacent blend
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- adjacentBlend2TrimStart() - Method in interface nxopen.features.StyledBlendBuilder
-
Returns the trim start of the second adjacent blend
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- adjacentBlends() - Method in interface nxopen.drawings.ViewStyleVirtualIntersectionsBuilder
-
Returns the adjacent blends toggle on the VIRTUAL INTERSECTIONS tab of the View Style Dialog
License requirements: None.
- adjacentBlends() - Method in interface nxopen.drawings.VirtualIntersectionsViewStyle
-
Returns the status of adjacent blends.
- adjacentBlends() - Method in interface nxopen.preferences.VirtualIntersectionsViewPreferences
-
Returns the status of adjacent blends.
- adjacentBlendsColor() - Method in interface nxopen.drawings.VirtualIntersectionsViewStyle
-
Returns the color of adjacent blends.
- adjacentBlendsColor() - Method in interface nxopen.preferences.VirtualIntersectionsViewPreferences
-
Returns the color of adjacent blends.
- adjacentBlendsEndGaps() - Method in interface nxopen.drawings.VirtualIntersectionsViewStyle
-
Returns the status of adjacent blends end gaps.
- adjacentBlendsEndGaps() - Method in interface nxopen.preferences.VirtualIntersectionsViewPreferences
-
Returns the status of adjacent blends end gaps.
- adjacentBlendsEndGapsData() - Method in interface nxopen.drawings.VirtualIntersectionsViewStyle
-
Returns the value of adjacent blends end gaps.
- adjacentBlendsEndGapsData() - Method in interface nxopen.preferences.VirtualIntersectionsViewPreferences
-
Returns the value of adjacent blends end gaps.
- adjacentBlendsFont() - Method in interface nxopen.drawings.VirtualIntersectionsViewStyle
-
Returns the font of adjacent blends.
- adjacentBlendsFont() - Method in interface nxopen.preferences.VirtualIntersectionsViewPreferences
-
Returns the font of adjacent blends.
- adjacentBlendsWidth() - Method in interface nxopen.drawings.VirtualIntersectionsViewStyle
-
Returns the width of adjacent blends.
- adjacentBlendsWidth() - Method in interface nxopen.preferences.VirtualIntersectionsViewPreferences
-
Returns the width of adjacent blends.
- AdjacentFaceMethod - Interface in nxopen.cae
-
Represents the output from the adjacent face smart selector method
To obtain an instance of this class use CAE::SmartSelectionManager
.
- adjacentFacetId - Variable in class nxopen.uf.UFFacet.AskAdjacentFacetData
-
- adjacentVec - Variable in class nxopen.uf.UFModl.MatchedgeData
-
- adjreg() - Method in interface nxopen.cam.RotateToolMoveBuilder
-
Returns the Adjust register
License requirements: None.
- adjReg() - Method in interface nxopen.cam.WireTool
-
Returns the Adjust Register
License requirements: None.
- adjregToggle() - Method in interface nxopen.cam.RotateToolMoveBuilder
-
Returns the Adjust register Toggle Status
License requirements: None.
- ADJUST - Static variable in class nxopen.cae.ProjectNodesToCadGeometryBuilder.Operation
-
Adjust nodes that are off the geometry by more than the input tolerance by projecting them on to the CAD geometry
- adjust - Variable in class nxopen.cam.MillingTrackpointBuilder.Data
-
the adjust
- adjust - Variable in class nxopen.cam.MillingTrackpointBuilder.TrackPointData
-
the adjust
- ADJUST - Static variable in class nxopen.tooling.DieBaseBuilder.DesignToolOption
-
adjust length of sub die base
- adjust - Variable in class nxopen.uf.UFCutter.TrackingPointData
-
- adjust - Variable in class nxopen.uf.UFCutter.TurnTrackingPointData
-
- ADJUST_LENGTH - Static variable in class nxopen.tooling.EjectorPostProcessingBuilder.TrimMethod
-
Adjust Length
- ADJUSTABLE - Static variable in class nxopen.HumanPosturePredictionBuilder.SeatType
-
Indicate adjustable seat
- adjustBoundaryChannel() - Method in interface nxopen.tooling.CoolingDefineChannelBuilder
-
Returns the flag to indicate whether to extend boundary channel or not
License requirements: None.
- adjustBoundaryChannel() - Method in interface nxopen.tooling.CoolingExtendBuilder
-
Returns the value which specifies whether to extend boundary channel or not.
- ADJUSTED_VELOCITY - Static variable in class nxopen.cae.Result.Quantity
-
- adjustedNodeLocationColor() - Method in interface nxopen.cae.ProjectNodesToCadGeometryBuilder
-
Returns the display color of proximity node new location which
will meet the given tolerance with undelying CAD geometry.
- adjustedOrigin() - Method in interface nxopen.annotations.TextComponent
-
Returns the adjusted text origin in absolute coordinates.
- adjustedPlateLength() - Method in interface nxopen.tooling.DieBaseBuilder
-
Returns the plate length value.
- adjustedThickness() - Method in interface nxopen.die.RibChildBuilder
-
Returns the adjusted thickness of the die rib.
- adjustedThickness() - Method in interface nxopen.die.RibParentBuilder
-
Returns the adjusted thickness of die ribs.
- adjustFastenerLength(int, int, FastenerAssy.StackTypeMethod) - Method in interface nxopen.tooling.FastenerAssy
-
Adjusts the fastener assembly length
License requirements: None.
- adjustFeedRateOption() - Method in interface nxopen.cam.CornerControlBuilder
-
Returns the adjust feed rate option
License requirements: None.
- adjustFlag - Variable in class nxopen.uf.UFPath.Cutcom
-
- adjustFlag - Variable in class nxopen.uf.UFPath.ToolChange
-
- adjustIdBuilder() - Method in interface nxopen.cam.MachinePocketGroupBuilder
-
Returns the adjust id
License requirements: None.
- adjustment() - Method in interface nxopen.cam.ProbeControlParametersBuilder
-
Returns the output adjustment option
License requirements: None.
- adjustment() - Method in interface nxopen.features.sheetmetal.JoggleBuilder
-
Returns the adjustment
License requirements: None.
- adjustmentMode() - Method in interface nxopen.cam.TurnRoughFinishLocalReturnBuilder
-
Returns the adjustment mode mode
License requirements: None.
- adjustmentValue() - Method in interface nxopen.presslinesimulation.MachineAdjustmentBuilder
-
Returns the value of the adjustment.
- adjustMethod() - Method in interface nxopen.tooling.ChannelAdjustBuilder
-
Returns the method for adjusting the cooling channels.
- AdjustMinimumRadiusBuilder - Interface in nxopen.facet
-
- adjustProximityNodes() - Method in interface nxopen.cae.ProjectNodesToCadGeometryBuilder
-
Adjusts the proximity nodes identified to the new location to meet the given tolerance with
underlying CAD geometries.
- adjustreg - Variable in class nxopen.cam.TrackingBuilder.Data
-
the adjust register
- adjustRegister() - Method in interface nxopen.cam.ToolChangeCiBuilder
-
Returns the Tool adjust register builder
License requirements: None.
- adjustRegister() - Method in interface nxopen.sim.KinematicComponentBuilder
-
Returns the adjust register
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- adjustRegister - Variable in class nxopen.uf.UFPath.Cutcom
-
- adjustRegister - Variable in class nxopen.uf.UFPath.ToolChange
-
- adjustRegister - Variable in class nxopen.uf.UFPath.TrackingPointChange
-
- adjustRegisterToggle() - Method in interface nxopen.cam.ToolChangeCiBuilder
-
Returns the Tool adjust register toggle
License requirements: None.
- adjustRegisterType() - Method in interface nxopen.cam.MachinePocketGroupBuilder
-
- adjustRegisterType() - Method in interface nxopen.sim.KinematicComponentBuilder
-
Returns the adjust register type
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- adjustShapeBoundary() - Method in interface nxopen.facet.DetectPrimitivesBuilder
-
Adjust shape detection result with selectivity angle
License requirements: None.
- adjustStatus - Variable in class nxopen.uf.UFCutter.TrackingPointData
-
- adjustused - Variable in class nxopen.cam.MillingTrackpointBuilder.Data
-
the adjust toggle
- adjustused - Variable in class nxopen.cam.MillingTrackpointBuilder.TrackPointData
-
the adjust toggle
- adjustVector() - Method in interface nxopen.tooling.ChannelAdjustBuilder
-
Returns the vector specified for the adjust direction.
- administrationBypass() - Method in interface nxopen.pdm.SessionSettings
-
Returns a flag controlling the Teamcenter administrator's bypass option.
- administrationLogging() - Method in interface nxopen.pdm.SessionSettings
-
Returns a flag controlling Teamcenter administration logging.
- AdmMoveFace - Interface in nxopen.features
-
Represents a ADM Move Face feature
To create or edit an instance of this class, use
AdmMoveFaceBuilder
Created in NX6.0.0
- AdmMoveFaceBuilder - Interface in nxopen.features
-
- AdmMoveFaceBuilder.MoveOptionType - Class in nxopen.features
-
Represents the move option.
- AdmOffsetRegion - Interface in nxopen.features
-
Represents a linear dimension feature
To create or edit an instance of this class, use
AdmOffsetRegionBuilder
Created in NX6.0.0
- AdmOffsetRegionBuilder - Interface in nxopen.features
-
- AdmResizeFace - Interface in nxopen.features
-
Represents an ADM resize face feature
To create or edit an instance of this class, use
AdmResizeFaceBuilder
Created in NX6.0.0
- AdmResizeFaceBuilder - Interface in nxopen.features
-
Represents a builder for a resize face feature.
- ADOPT - Static variable in class nxopen.features.shipdesign.PlateBuilder.Types
-
Adopts plate body.
- ADOPT - Static variable in class nxopen.features.shipdesign.RoomBuilder.Types
-
Adopt a room from existing body
- ADOPT - Static variable in class nxopen.features.shipdesign.RoomPanelBuilder.Types
-
- ADOPT_EDGE_REINFORCEMENT - Static variable in class nxopen.features.shipdesign.StiffenerBuilder.Types
-
Adoption Edge Reinforcement type
- ADOPT_STIFFENER - Static variable in class nxopen.features.shipdesign.StiffenerBuilder.Types
-
Adoption Stiffener type
- AdoptableTypes() - Constructor for class nxopen.RuleManager.AdoptableTypes
-
- AdoptableTypes(int, int, int) - Constructor for class nxopen.RuleManager.AdoptableTypes
-
Constructor for the AdoptableTypes object.
- adoptAssemblyJoint() - Method in interface nxopen.mechatronics.PhysicsManager
-
- adoptAssemblyJoint(Constraint) - Method in interface nxopen.mechatronics.PhysicsManager
-
- adoptBodySelect() - Method in interface nxopen.features.shipdesign.RoomPanelBuilder
-
Returns the adopt body select
License requirements: None.
- adoptedDesignBody() - Method in interface nxopen.features.shipdesign.DvToMvMappingBuilder
-
Returns the adopted design body.
- adoptedMfgBody() - Method in interface nxopen.features.shipdesign.DvToMvMappingBuilder
-
Returns the adopted manufacturing body.
- ADOPTION - Static variable in class nxopen.features.shipdesign.PillarBuilder.CreationMethod
-
- ADOPTION - Static variable in class nxopen.features.shipdesign.StandardPartFrameworkBuilder.CreationType
-
In adoption
- adoption() - Method in interface nxopen.motion.AdoptionPair
-
Returns an adoption object
License requirements: mechanisms ("MECHANISMS")
.
- adoptionAnchorPointList() - Method in interface nxopen.features.shipdesign.StiffenerBuilder
-
Returns the adoption anchor point list.
- adoptionBaseFaces() - Method in interface nxopen.features.shipdesign.StiffenerBuilder
-
Returns the adoption base faces.
- adoptionBodies() - Method in interface nxopen.features.shipdesign.PlateBuilder
-
Returns the adoption bodies, which are used to create multiple plates.
- adoptionBodies() - Method in interface nxopen.features.shipdesign.StiffenerBuilder
-
Returns the adoption bodies, which are used to create multiple adoption stiffeners.
- adoptionBodiesMoldFace() - Method in interface nxopen.features.shipdesign.PlateBuilder
-
Returns the mold face of adoption bodies.
- adoptionBody() - Method in interface nxopen.features.shipdesign.PillarBuilder
-
Returns the adoption body.
- adoptionBody() - Method in interface nxopen.features.shipdesign.RoomBuilder
-
Returns the body to be adopted as a room.
- adoptionEndCutFaces1() - Method in interface nxopen.features.shipdesign.StiffenerBuilder
-
Returns the adoption end cut 1 faces.
- adoptionEndCutFaces2() - Method in interface nxopen.features.shipdesign.StiffenerBuilder
-
Returns the adoption end cut 2 faces.
- AdoptionManager - Interface in nxopen.motion
-
Represents the
AdoptionManager
An instance of this class can not be obtained
Created in NX11.0.0
NX_REMOVE_FROM_JAVA_API
- adoptionMoldFaces() - Method in interface nxopen.features.shipdesign.StiffenerBuilder
-
Returns the adoption mold faces.
- adoptionOpposingMoldFaces() - Method in interface nxopen.features.shipdesign.StiffenerBuilder
-
Returns the adoption opposing mold faces.
- AdoptionPair - Interface in nxopen.motion
-
- AdoptionPairCollection - Interface in nxopen.motion
-
Represents a collection of adoption pair objects
To obtain an instance of this class, refer to
MotionManager
Created in NX11.0.0
NX_REMOVE_FROM_JAVA_API
- adoptionPairs() - Method in interface nxopen.motion.MotionManager
-
Returns the
AdoptionManager
belonging to this part
Created in NX11.0.0
NX_REMOVE_FROM_JAVA_API
- adoptionTopFaces() - Method in interface nxopen.features.shipdesign.StiffenerBuilder
-
Returns the adoption top faces.
- adoptKinematicsFromAssembly() - Method in interface nxopen.motion.AdoptionManager
-
Animation play
License requirements: mechanisms ("MECHANISMS")
.
- adoptNxObjects(Tag[], int, boolean) - Method in interface nxopen.uf.UFKf
-
- adoptObject(NXObject) - Method in interface nxopen.optimization.DesignStudyAttributeBuilder
-
Adopt object
License requirements: None.
- adoptObject(NXObject) - Method in interface nxopen.optimization.OptimizationAttributeBuilder
-
Adopt object
License requirements: None.
- adoptObjects(NXObject[]) - Method in interface nxopen.RuleManager
-
Adopt the specified ug objects.
- adoptUgObjects(Tag[], int) - Method in interface nxopen.uf.UFKf
-
- adOutPoint - Variable in class nxopen.uf.UFSf.EdgeEvaluateClosestPointData
-
- adpath - Variable in class nxopen.ame.TypeMappingBuilder.LoadData
-
- ADR42 - Static variable in class nxopen.features.vehicledesign.WheelCoveringBuilder.SurfaceSectionType
-
The checking surface is created as ADR 42 type
- adType() - Method in interface nxopen.ame.TypeMappingBuilder
-
Returns the ad type selection
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- adultHic1000Angle() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the angle to translate the adult HIC (Head Injury Criterion) 1000 impact sheet and grid
License requirements: None.
- adultHic1000Offset() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
- adultHic1000OutputColor() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the color that will be used for the adult HIC (Head Injury Criterion) 1000 impact sheet
License requirements: None.
- adultHic1000OutputFont() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the font that will be used for the adult HIC (Head Injury Criterion) 1000 impact sheet
License requirements: None.
- adultHic1000OutputLayer() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the layer that will be used for the adult HIC (Head Injury Criterion) 1000 impact sheet
License requirements: None.
- adultHic1000OutputWidth() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the line width that will be used for the adult HIC (Head Injury Criterion) 1000 impact sheet
License requirements: None.
- adultHic1700Angle() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the angle to translate the adult HIC (Head Injury Criterion) 1700 impact sheet and grid
License requirements: None.
- adultHic1700Offset() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
- adultHic1700OutputColor() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the color that will be used for the adult HIC (Head Injury Criterion) 1700 impact sheet
License requirements: None.
- adultHic1700OutputFont() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the font that will be used for the adult HIC (Head Injury Criterion) 1700 impact sheet
License requirements: None.
- adultHic1700OutputLayer() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the layer that will be used for the adult HIC (Head Injury Criterion) 1700 impact sheet
License requirements: None.
- adultHic1700OutputWidth() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the line width that will be used for the adult HIC (Head Injury Criterion) 1700 impact sheet
License requirements: None.
- ADV_COMBAT_UNIFORM - Static variable in class nxopen.HumanPosturePredictionBuilder.GarbType
-
Advanced Combat Uniform.
- ADVANCE_OFF - Static variable in class nxopen.features.StudioXformBuilder.AdvancedMethodType
-
Deprecated.
Turn off advanced methods
- ADVANCE_OFF - Static variable in class nxopen.features.StudioXformBuilderEx.AdvancedMethodType
-
Deprecated.
Turn off advanced methods
- advanceAngle() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns the advance angle (degrees)
License requirements: None.
- ADVANCED - Static variable in class nxopen.cam.OperationBuilder.OptimizationLevelTypes
-
advanced
- ADVANCED - Static variable in class nxopen.features.BridgeCurveBuilder.CurveFitTypes
-
Deprecated.
general fit curve
- ADVANCED - Static variable in class nxopen.features.JoinCurvesBuilder.OutputCurve
-
Advanced output curve
- ADVANCED - Static variable in class nxopen.geometricutilities.CurveFitOptions.FitMethod
-
Advanced
- ADVANCED - Static variable in class nxopen.geometricutilities.Rebuild.RebuildTypes
-
Specify the maximum degree and maximum segments to rebuild.
- advanced(String[], String[]) - Method in interface nxopen.pdm.PdmSearch
-
This API performs advanced search in the teamcenter and returns the result vector .Internally it will execute the NX standard Query
"__NX_STD_ANY_ITEM_QUERY".
- ADVANCED - Static variable in class nxopen.preferences.SessionModeling.CurveFitMethodType
-
Indicates the Curve Fit Method type is advanced
- advanced - Variable in class nxopen.uf.UFMotion.Motion2DContact
-
- advanced - Variable in class nxopen.uf.UFMotion.Motion3DContact
-
- ADVANCED_OFF - Static variable in class nxopen.features.StudioXformBuilderEx.AdvancedMethodOptionType
-
No advanced methods
- ADVANCED_SOLUTION - Static variable in class nxopen.motion.TextBasedElementBuilder.TypeChoices
-
- ADVANCED_TRIMMING - Static variable in class nxopen.features.MidSurfaceByFacePairsBuilder.TrimmingOptionType
-
Advanced trimming
- ADVANCED_UNFORM - Static variable in class nxopen.bodydes.OnestepUnformBuilder.Process
-
spring back
- advancedAspectNaming() - Method in interface nxopen.ame.NamingRuleSettingsBuilder
-
Returns the advanced aspect naming builder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- AdvancedFlange - Interface in nxopen.features.sheetmetal
-
Represents an advanced flange feature
To create or edit an instance of this class, use
AdvancedFlangeBuilder
Created in NX11.0.0
- AdvancedFlangeBuilder - Interface in nxopen.features.sheetmetal
-
Represents a Sheetmetal Advanced Flange builder class.
- AdvancedFlangeBuilder.Insets - Class in nxopen.features.sheetmetal
-
This enum defines the material types
- AdvancedFlangeBuilder.LengthReferences - Class in nxopen.features.sheetmetal
-
This enum defines the flange length dimension types
- AdvancedFlangeBuilder.Types - Class in nxopen.features.sheetmetal
-
This enum defines the type options.
- advancedMaterial() - Method in interface nxopen.JtCreator
-
Returns the advancedMaterial *- Specifies whether advanced material and light information to be written in JT
License requirements: None.
- advancedMethod() - Method in interface nxopen.features.StudioXformBuilder
-
- advancedMethod() - Method in interface nxopen.features.StudioXformBuilderEx
-
- advancedMethodOption() - Method in interface nxopen.features.StudioXformBuilderEx
-
Returns the advanced method
License requirements: None.
- advancedPlot() - Method in interface nxopen.PlotBuilder
-
Initialize the SDI dialog.
- AdvancedSolution - Interface in nxopen.motion
-
- AdvancedSolutionBuilder - Interface in nxopen.motion
-
- advancedSolutionObject() - Method in interface nxopen.motion.GraphObjectBuilder
-
Returns the advanced solution object who owns the graph object
License requirements: None.
- advancedTab() - Method in interface nxopen.motion.TirePropertyBasicBuilder
-
Returns the advancedTab.
- advancedTab() - Method in interface nxopen.motion.TirePropertyMotorcycleBuilder
-
Returns the advancedTab.
- advancedVisViewTolerance() - Method in interface nxopen.preferences.PartVisualizationShade
-
Returns the tolerance for advanced visualization views.
- advancedVisViewUpdateMode() - Method in interface nxopen.preferences.PartVisualizationShade
-
Returns the update mode for advanced visualization views.
- advanceProgress(int) - Method in interface nxopen.shipdesign.Generator
-
Advances the progress bar.
- advCompression() - Method in interface nxopen.ListCreator
-
Returns the m_advCompression * - Specifies the advanced compression for Defined Level of Detail
License requirements: None.
- advVisAlignFacets() - Method in interface nxopen.display.FacetSettingsBuilder
-
Returns the state of whether facets for advanced visualization views should be aligned along
common edges.
- advVisFacetRatio() - Method in interface nxopen.display.FacetSettingsBuilder
-
- advVisFacetScale() - Method in interface nxopen.display.FacetSettingsBuilder
-
Returns the facet scale to use for Advanced Visualization Views
License requirements: None.
- advVisFacetToViewRatio() - Method in interface nxopen.display.FacetSettingsBuilder
-
- advVisRefinementFactor() - Method in interface nxopen.display.FacetSettingsBuilder
-
Returns the refinement factor to use for Advanced Visualization Views
License requirements: None.
- advVisTolerance() - Method in interface nxopen.display.FacetSettingsBuilder
-
Returns the tolerance setting to use for Advanced Visualization Views
License requirements: None.
- advVisUpdate() - Method in interface nxopen.display.FacetSettingsBuilder
-
Returns the update mode to use for Advanced Visualization Views
License requirements: None.
- AdvVisViewFacetTolerancesData() - Constructor for class nxopen.preferences.PartVisualizationShade.AdvVisViewFacetTolerancesData
-
- AERIAL - Static variable in class nxopen.die.PierceTaskBuilder.CamTypes
-
Aerial Cam
- AERIAL - Static variable in class nxopen.die.TrimTaskBuilder.CamTypes
-
Aerial Cam
- AERIAL_CAM - Static variable in class nxopen.tooling.DieEngTrimTaskBuilder.TrimTaskCamType
-
- AERIAL_CONVENTIONAL - Static variable in class nxopen.die.FlangeTaskBuilder.CamTypes
-
Aerial Cam - Conventional Fill
- AERIAL_ROTARY - Static variable in class nxopen.die.FlangeTaskBuilder.CamTypes
-
Aerial Cam - Rotary Fill
- AERO_AERO_FORCE - Static variable in class nxopen.motion.TextBasedElementBuilder.TypeChoices
-
- AERO_HYDRO_FORCE - Static variable in class nxopen.motion.TextBasedElementBuilder.TypeChoices
-
- AERO_SHEETMETAL - Static variable in class nxopen.FileNewApplication
-
Deprecated.
Specifies an Aerospace sheet metal template
- AERO_VEHICLE_FORCE - Static variable in class nxopen.motion.TextBasedElementBuilder.TypeChoices
-
- AeroCollection - Interface in nxopen.features
-
This class contains the factory method for creating aero design feature builder.
- aeroCollection() - Method in interface nxopen.features.FeatureCollection
-
Returns the AeroCollection instance belonging to this part .
- AeroFlange - Interface in nxopen.features
-
Represents a flange feature
To create or edit an instance of this class, use
AeroFlangeBuilder
Created in NX10.0.0
- AeroFlangeBuilder - Interface in nxopen.features
-
- AeroFlangeBuilder - Interface in nxopen.features.sheetmetal
-
Represents a Aerospace Sheet Metal Flange Builder.
- AeroFlangeBuilder.AlignReferenceType - Class in nxopen.features
-
This attribute represents align end type
- AeroFlangeBuilder.CompType - Class in nxopen.features.sheetmetal
-
This method defines the types of Flange Compensation
- AeroFlangeBuilder.DimType - Class in nxopen.features.sheetmetal
-
This enum defines the flange length dimension types
- AeroFlangeBuilder.DirType - Class in nxopen.features.sheetmetal
-
This enum defines the type of direction vector
- AeroFlangeBuilder.EndCompensationData - Class in nxopen.features.sheetmetal
-
- AeroFlangeBuilder.EndType - Class in nxopen.features.sheetmetal
-
This enum defines the ends of a bend edge
- AeroFlangeBuilder.GuideObjectTypes - Class in nxopen.features
-
This attribute represents the Guide Object types
- AeroFlangeBuilder.LengthData - Class in nxopen.features.sheetmetal
-
- AeroFlangeBuilder.LengthType - Class in nxopen.features.sheetmetal
-
This enum defines the length type options.
- AeroFlangeBuilder.LimitObjectTypes - Class in nxopen.features
-
This attribute represents the limit object types
- AeroFlangeBuilder.MatType - Class in nxopen.features.sheetmetal
-
This enum defines the material types
- AeroFlangeBuilder.PointOption - Class in nxopen.features
-
This attribute represents the options for on path dimension
- AeroFlangeBuilder.ThicknessDimensionOptions - Class in nxopen.features
-
This attribute represents the options for thickness dimension
- AeroFlangeBuilder.WidthDimensionOptions - Class in nxopen.features
-
This attribute represents the options for width dimension
- AeroFlangeBuilder.WidthMethods - Class in nxopen.features
-
This attribute represents the width method
- AeroFlatPatternBuilder - Interface in nxopen.features.sheetmetal
-
Represents a Flat Pattern feature builder.
- AeroFlatSolidBuilder - Interface in nxopen.features.sheetmetal
-
Represents a Flat As Solid feature builder.
- AeroJoggleBuilder - Interface in nxopen.features.sheetmetal
-
Represents a Aerospace Sheet Metal Joggle Builder.
- AeroJoggleBuilder.SideType - Class in nxopen.features.sheetmetal
-
This enum defines the side of a twin joggle
only side1 is used for a single joggle
- AeroLighteningCutoutBuilder - Interface in nxopen.features.sheetmetal
-
- AeroLighteningCutoutBuilder.Types - Class in nxopen.features.sheetmetal
-
Represents the cutout type.
- AeroReformBuilder - Interface in nxopen.features.sheetmetal
-
Represents a Aerospace Sheet Metal REFORM Builder.
- AeroRib - Interface in nxopen.features
-
Represents a aero rib feature
To create or edit an instance of this class, use
AeroRibBuilder
Created in NX10.0.0
- AeroRibBuilder - Interface in nxopen.features
-
- AeroRibBuilder.AlignReferenceType - Class in nxopen.features
-
This attribute represents align end type
- AeroRibBuilder.GuideObjectTypes - Class in nxopen.features
-
This attribute represents the Guide Object types
- AeroRibBuilder.HeightDimensionOptions - Class in nxopen.features
-
This attribute represents the options for height dimension
- AeroRibBuilder.LimitObjectTypes - Class in nxopen.features
-
This attribute represents the limit object types
- AeroRibBuilder.PointOption - Class in nxopen.features
-
This attribute represents the options for on path dimension
- AeroRibBuilder.RibForms - Class in nxopen.features
-
This attribute represents the Rib Form
- AeroRibBuilder.ThicknessDimensionOptions - Class in nxopen.features
-
This attribute represents the options for thickness dimension
- aeroSheetmetalManager() - Method in interface nxopen.features.FeatureCollection
-
Returns the aerospace sheet metal manager for this part .
- AeroSheetmetalManager - Interface in nxopen.features.sheetmetal
-
Provides methods for manipulating the Knowledge Fusion rules in a part
To obtain an instance of this class, refer to
FeatureCollection
Created in NX4.0.0
- AEROSPACE_SHEET_METAL - Static variable in class nxopen.features.sheetmetal.ApplicationContext
-
Aerospace Sheet Metal application context
- AeroStructManager - Interface in nxopen.cae
-
Represents the Aerosizing manager that contains all Aerosizing objects.
- aeroStructManager() - Method in interface nxopen.cae.SimSimulation
-
Returns the aero structure manager belonging to this sim part .
- AeroUnformBuilder - Interface in nxopen.features.sheetmetal
-
Represents a Aerospace Sheet Metal UNFORM Builder.
- AestheticFaceBlend - Interface in nxopen.features
-
Represents an aesthetic face blend feature
To create or edit an instance of this class, use
AestheticFaceBlendBuilder
Created in NX7.5.0
- AestheticFaceBlendBuilder - Interface in nxopen.features
-
This class will provide ability to create aesthetically pleasing blend surfaces on sheet and solid bodies.
- AestheticFaceBlendBuilder.AlignmentType - Class in nxopen.features
-
Alignment method provides the ability to align the cross sections of the blend in the user specified direction
- AestheticFaceBlendBuilder.BlendFacesType - Class in nxopen.features
-
Trimming options
- AestheticFaceBlendBuilder.BlendType - Class in nxopen.features
-
Tangent method will create tangent lines based on the method employed.
- AestheticFaceBlendBuilder.CenterType - Class in nxopen.features
-
Center methods will define peak of the blend
- AestheticFaceBlendBuilder.EndTrimObjectType - Class in nxopen.features
-
End object overriding trim options
- AestheticFaceBlendBuilder.RhoType - Class in nxopen.features
-
Rho options
- AestheticFaceBlendBuilder.SegmentationType - Class in nxopen.features
-
Segmentations options
- AestheticFaceBlendBuilder.ShapeType - Class in nxopen.features
-
Shape methods will define the high level shape of the blend cross section.
- AestheticFaceBlendBuilder.StartTrimObjectType - Class in nxopen.features
-
Start object overriding trim options
- AF - Static variable in class nxopen.cae.responsesimulation.RSEventSolverParameters.DdamCoefficientType
-
- AF - Static variable in class nxopen.features.shipdesign.SectionViewBuilder.DirectionOptions
-
- affineComb(double[], double, double[]) - Method in interface nxopen.uf.UFVec2
-
- affineComb(double[], double, double[]) - Method in interface nxopen.uf.UFVec3
-
- affirmReusableComponent() - Method in interface nxopen.tooling.AddReusablePart
-
Affirms insertion of the reusable component
License requirements: None.
- AFT - Static variable in class nxopen.cae.Result.BeamEnd
-
Aft end
- AFT - Static variable in class nxopen.features.shipdesign.ManufacturingAssemblyNavigatorBuilder.OrientationType
-
Aft Orientation
- AFT - Static variable in class nxopen.features.shipdesign.ShipCoordinatesBuilder.XDirectionType
-
- AFT - Static variable in class nxopen.features.shipdesign.StandardPartItemBuilder.Direction
-
aft
- AFT_PERPENDICULAR - Static variable in class nxopen.annotations.FrameBarElements
-
- AFT_STBD_FR_OUT_CTR - Static variable in class nxopen.features.shipdesign.PlateSystemBuilder.StiffenerDirectionType
-
Direction is Aft, Starboard, From Reference, Outside or Centered.
- AFT_STBD_FR_OUT_DN - Static variable in class nxopen.features.shipdesign.PlateSystemBuilder.StiffenerDirectionType
-
Direction is Aft, Starboard, From Reference, Outside or Down.
- AFT_STBD_OUT_DN - Static variable in class nxopen.features.shipdesign.ThicknessDirectionBuilder.ThicknessDirectionType
-
Direction is Aft, Starboard, Outside or Down.
- AFTER - Static variable in class nxopen.annotations.DiameterRadiusSymbolPlacement
-
Specifies diameter/radius symbol is placed after dimension text
- AFTER - Static variable in class nxopen.annotations.DualDimensionPlacement
-
Specifies dual dimension after primary dimension
- AFTER - Static variable in class nxopen.annotations.FeatureControlFrameIndicatorBuilder.FcfIndicatorDirection
-
- AFTER - Static variable in class nxopen.annotations.InspectionSymbolAroundAppendedText
-
Include after appended text
- AFTER - Static variable in class nxopen.annotations.TolerancePlacement
-
Specifies tolerance after dimension text
- AFTER - Static variable in class nxopen.blockstyler.Node.DropType
-
Drop permitted after the target node
- AFTER - Static variable in class nxopen.blockstyler.SetList.InsertionLocation
-
- AFTER - Static variable in class nxopen.cae.SimSolution.StepPosition
-
after the specified step
- AFTER - Static variable in class nxopen.cam.CamPathToolpathEventLocation
-
- AFTER - Static variable in class nxopen.cam.CAMSetup.Paste
-
paste after
- AFTER - Static variable in class nxopen.drawings.ScalePositionTypes
-
- AFTER - Static variable in class nxopen.features.FeatureCollection.ReorderType
-
- AFTER - Static variable in class nxopen.mechatronics.SystemObject.ReorderType
-
After
- AFTER - Static variable in class nxopen.MeshProfileString.InsertOrder
-
- AFTER - Static variable in class nxopen.report.CommandLibrary.MoveCommandLocation
-
Move commands behind a referenced command
- AFTER - Static variable in class nxopen.report.Report.MoveItemLocation
-
Move item to the location after reference item
- AFTER - Static variable in class nxopen.tooling.MotionSimulationBuilder.EjectorMoveOptions
-
Eject product after mold fully opened
- AFTER - Static variable in class nxopen.uf.UFGdt.TextLocation
-
- AFTER_ALL_CONSTRAINT - Static variable in class nxopen.geometricutilities.SupportPlaneData.LockPlaneStatus
-
Lock after all constraint
- AFTER_AUTOMATION - Static variable in class nxopen.report.CommandBuilder.UserInputLocation
-
The user item after automation
- AFTER_CONTAINMENT - Static variable in class nxopen.cam.RoughFinishTurningBuilder.ToleranceOffsetTypes
-
Tolerance offset after containment.
- AFTER_CONTAINMENT - Static variable in class nxopen.cam.TurnFeatureGeomBuilder.ToleranceOffsetModes
-
Tolerance offset after containment.
- AFTER_FIRST_AND_SECOND_CONSTRAINT - Static variable in class nxopen.geometricutilities.SupportPlaneData.LockPlaneStatus
-
Lock after first and second constraint
- AFTER_FIRST_AND_THIRD_CONSTRAINT - Static variable in class nxopen.geometricutilities.SupportPlaneData.LockPlaneStatus
-
Lock after first and third constraint
- AFTER_FIRST_CONSTRAINT - Static variable in class nxopen.geometricutilities.SupportPlaneData.LockPlaneStatus
-
Lock after first constraint
- AFTER_LEAD_IN - Static variable in class nxopen.cam.NcmWedmBuilder.CutcomOnTypes
-
cutcom on after lead in
- AFTER_LEAD_OUT - Static variable in class nxopen.cam.NcmWedmBuilder.CutcomOffTypes
-
cutcom off after lead out
- AFTER_MODELING - Static variable in class nxopen.SmartObject.UpdateOption
-
Updates after modeling (e.g. a dimension).
- AFTER_PARENT_BODY - Static variable in class nxopen.SmartObject.UpdateOption
-
Updates after the parent body.
- AFTER_SECOND_AND_THIRD_CONSTRAINT - Static variable in class nxopen.geometricutilities.SupportPlaneData.LockPlaneStatus
-
Lock after second and third constraint
- AFTER_SECOND_CONSTRAINT - Static variable in class nxopen.geometricutilities.SupportPlaneData.LockPlaneStatus
-
Lock after second constraint
- AFTER_STUB - Static variable in class nxopen.annotations.NarrowDisplayOption
-
Displays narrow dimension after stub
- AFTER_STUB - Static variable in class nxopen.annotations.TextPosition
-
Specifies text position after stub
- AFTER_THIRD_CONSTRAINT - Static variable in class nxopen.geometricutilities.SupportPlaneData.LockPlaneStatus
-
Lock after third constraint
- afterName() - Method in interface nxopen.PartReopenStatus
-
Returns the name of the part after it was reopened.
- afterText() - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder
-
Returns the after text
License requirements: None.
- afterTextType() - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder
-
Returns the after text enum
License requirements: None.
- aftLimitPlane() - Method in interface nxopen.features.shipdesign.ShellExpansionBuilder
-
Returns the aft limit plane
License requirements: None.
- aftOffset() - Method in interface nxopen.cae.BeamSectionOffsetOptions
-
Returns the aft offsets
License requirements: None.
- aftPerpendicular() - Method in interface nxopen.annotations.BaseFrameBarBuilder
-
Returns the aft perpendicular
License requirements: None.
- aftPerpendicular() - Method in interface nxopen.features.shipdesign.MainDimensionsBuilder
-
Returns the expression containing the position value of Aft Perpendicular along the X axis.
- aftPerpendicularLabelColor() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the label color
License requirements: None.
- aftPerpendicularLabelFont() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the label font
License requirements: None.
- aftPerpendicularLabelItalicized() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the label italicized
License requirements: None.
- aftPerpendicularLabelWidth() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the label width
License requirements: None.
- aftPerpendicularStyle() - Method in interface nxopen.annotations.FrameBarStyleBuilder
-
Returns the style aft perpendicular
License requirements: None.
- aftPerpendicularTicColor() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the tic color
License requirements: None.
- aftPerpendicularTicDisplay() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the aft perpendicular tic display type
License requirements: None.
- aftPerpendicularTicFont() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the tic font
License requirements: None.
- aftPerpendicularTicLength() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the tic length
License requirements: None.
- aftPerpendicularTicWidth() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the tic width
License requirements: None.
- aftPlane() - Method in interface nxopen.features.shipdesign.ExpansionDrawingBuilder
-
Returns the aft plane
License requirements: None.
- aftStiffenerExtension() - Method in interface nxopen.features.shipdesign.ManufacturingPreparationBuilder
-
Returns the aft stiffener extension.
- AFU - Static variable in class nxopen.cae.DurabilityStrainGageAnalyzerBuilder.GageSourceEnum
-
Afu
- AFU - Static variable in class nxopen.cae.Result.Filetype
-
- AfuAbscissaHeaderInfo - Interface in nxopen.cae
-
Represents the data to define abscissa header information for an afu record
.
- afuAbscissaHeaderInfo() - Method in interface nxopen.cae.AfuData
-
Returns the abscissa header information data of the AFU Data Record
License requirements: None.
- AfuData - Interface in nxopen.cae
-
the data used to create an AFU Data Record .
- afuData - Variable in class nxopen.cae.AfuManager.AfuRecordData
-
AFU record data queried
- AfuData.AbscissaAndOrdinateAxisDefinitionData - Class in nxopen.cae
-
- AfuData.AbscissaType - Class in nxopen.cae
-
Defines abscissa data type for AFU data record
- AfuData.ComplexData - Class in nxopen.cae
-
- AfuData.EvenData - Class in nxopen.cae
-
- AfuData.ExtrapolationType - Class in nxopen.cae
-
Defines data extrapolation type for AFU data record
- AfuData.InterpolationType - Class in nxopen.cae
-
Defines data interpolation type for AFU data record
- AfuData.OrdinateType - Class in nxopen.cae
-
Defines ordinate data type for AFU data record
- AfuData.RealData - Class in nxopen.cae
-
- AfuDataConvertor - Interface in nxopen.cae
-
Convert data values for the AFU Data Record
To obtain an instance of this class, refer to
AfuManager
Created in NX5.0.0
- afuDataConvertor() - Method in interface nxopen.cae.AfuManager
-
Contains FFT operations for AFU data .
- AfuDataConvertor.Fft - Class in nxopen.cae
-
Defines the way of FFT on AFU Data Record
- AfuDataConvertor.FftFrequencyData - Class in nxopen.cae
-
- AfuDataConvertor.FftTimeData - Class in nxopen.cae
-
- afuFile() - Method in interface nxopen.motion.GraphBuilder
-
- afuFunction() - Method in interface nxopen.cae.DurabilityEvaluateFatigueHistoryBuilder
-
The function is called when the user click the button of Export to AFU Funciton
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- afuHeaderId() - Method in interface nxopen.cae.AfuData
-
Returns the AFU Header Id data of the AFU Data Record
License requirements: None.
- AfuHeaderId - Interface in nxopen.cae
-
the data used to create header id information for an AFU Data Record .
- AfuManager - Interface in nxopen.cae
-
AFU File and Data Record Manager
To obtain an instance of this class, refer to
Session
Created in NX4.0.0
- afuManager() - Method in interface nxopen.Session
-
Returns the
AfuManager
belonging to this session
Created in NX3.0.0
- AfuManager.AfuRecordData - Class in nxopen.cae
-
- AfuManager.WritingFileMode - Class in nxopen.cae
-
This enumeration defines the modes of outputting information to a file
- AfuMathFastRMSInfo - Interface in nxopen.cae
-
Represents the Fast RMS parameter information
.
- AfuMathFastRMSInfo.Data - Class in nxopen.cae
-
- AfuMathFastRMSOutput - Interface in nxopen.cae
-
Represents the Fast RMS output information
.
- AfuMathFastRMSOutput.PsdfitFittedData - Class in nxopen.cae
-
- AfuMathFastRMSOutput.PsdfitOriginalData - Class in nxopen.cae
-
- afuMathOperation() - Method in interface nxopen.cae.AfuManager
-
Contains Math Operations for AFU data .
- AfuMathOperation - Interface in nxopen.cae
-
Does math operations on the AFU Data Records
To obtain an instance of this class, refer to
AfuManager
Created in NX5.0.0
- AfuMathOperation.InterpolationMode - Class in nxopen.cae
-
Defines the interpolation mode
- AfuMathOperation.MultiType - Class in nxopen.cae
-
Defines the type of Multi Math Operations
- AfuMathOperation.OuterInterpolation - Class in nxopen.cae
-
Defines the outer interpolation method
- AfuMathOperation.OutputType - Class in nxopen.cae
-
Defines the output type of new AFU Data Record
- AfuMathOperation.Overall - Class in nxopen.cae
-
Defines the type of Overall Math Operations
- AfuMathOperation.SrsToTimeOctave - Class in nxopen.cae
-
Defines the octave spacing for SRS to TIME
- AfuMathOperation.SrsToTimeOption - Class in nxopen.cae
-
Defines the type of conversion option for SRS to TIME
- AfuMathOperation.SrsToTimeStrategy - Class in nxopen.cae
-
Defines the conversion strategy for SRS to TIME when using the Wavelet method
- AfuMathOperation.TimeToSrsAxisType - Class in nxopen.cae
-
Defines the frequency axis type for TIME to SRS
- AfuMathOperation.TimeToSrsResponseType - Class in nxopen.cae
-
Defines the response type paramater for TIME to SRS
- afuOrdinateHeaderInfo() - Method in interface nxopen.cae.AfuData
-
Returns the ordinate header information data of the AFU Data Record
License requirements: None.
- AfuOrdinateHeaderInfo - Interface in nxopen.cae
-
Represents the ordinate header information for an afu record
.
- AfuRecordData() - Constructor for class nxopen.cae.AfuManager.AfuRecordData
-
- afuRecordZValue() - Method in interface nxopen.cae.xyplot.Preference
-
Returns the Z value type for afu record in 3D plot
License requirements: None.
- afuZHeaderInfo() - Method in interface nxopen.cae.AfuData
-
Returns the Z axis header information data of the AFU Data Record
License requirements: None.
- AfuZHeaderInfo - Interface in nxopen.cae
-
Represents the Z axis header information for an afu record
.
- AGAINST_ANOTHER_DRAWING - Static variable in class nxopen.drawings.TrackDrawingChangesGeneralBuilder.CompareMethodType
-
This option is used to compare different part over current part
- AGAINST_ANOTHER_DRAWING - Static variable in class nxopen.drawings.VisualDrawingComparePrefsBuilder.VisualDrawingComparePrefsMethodType
-
This option is used to overlay different part over current part
- AGAINST_OVERLAY_DATAIN_ACTIVE_DRAWING - Static variable in class nxopen.drawings.VisualDrawingComparePrefsBuilder.VisualDrawingComparePrefsMethodType
-
This option is used to overlay current part on itself
- AGAINST_SNAPSHOT_DATA_IN_ACTIVE_DRAWING - Static variable in class nxopen.drawings.TrackDrawingChangesGeneralBuilder.CompareMethodType
-
This option is used to compare current part on itself
- AGGREGATED - Static variable in class nxopen.cae.SimLoadRecipeLbcGenerator.LbcHierarchyTypes
-
Aggregated LBCs
- AGRESSIVE - Static variable in class nxopen.cae.optimization.TBSTopologySensitivityOptimizationParameters.DensityUpdate
-
Agressive strategy
- ahpheight() - Method in interface nxopen.features.vehicledesign.ManikinBuilder
-
Returns the AHP height
License requirements: None.
- ahplength() - Method in interface nxopen.features.vehicledesign.ManikinBuilder
-
Returns the AHP length
License requirements: None.
- ahptoSWCHeight() - Method in interface nxopen.features.vehicledesign.ManikinBuilder
-
Returns the AHP to Steering Wheel Center height.
- ahptoSWCLength() - Method in interface nxopen.features.vehicledesign.ManikinBuilder
-
Returns the AHP to Steering Wheel Center length.
- AIN_B - Static variable in class nxopen.shipdesign.Generator.ClashType
-
Body a is completly in body b, without abut.
- AIR_TIGHT - Static variable in class nxopen.features.shipdesign.PlateBuilder.TightnessOptions
-
- airCylinderParent() - Method in interface nxopen.die.RotorBuilder
-
Returns the air cylinder parent builder of the rotor.
- airTrapOption() - Method in interface nxopen.tooling.FlowDisplayBuilder
-
Returns the air trap option to be set
License requirements: None.
- AKIMA - Static variable in class nxopen.cae.AfuData.InterpolationType
-
Akima Interpolation
- AKIMA - Static variable in class nxopen.cae.Function.InterpolationMethod
-
Indicates data calculated by akima interpolation
- AKIMA1D - Static variable in class nxopen.fields.FieldEvaluator.InterpolationEnum
-
akima interpolation
- AKIMA72 - Static variable in class nxopen.cae.AfuData.InterpolationType
-
Akima72 Interpolation
- AKIMA721D - Static variable in class nxopen.fields.FieldEvaluator.InterpolationEnum
-
akima72 interpolation
- AKIMA72LINEAR2D - Static variable in class nxopen.fields.FieldEvaluator.InterpolationEnum
-
akima72 interpolation in x direction, linear in y direction
- AKIMA_LINEAR2D - Static variable in class nxopen.fields.FieldEvaluator.InterpolationEnum
-
akima interpolation in x direction, linear in y direction
- ALARM - Static variable in class nxopen.cam.ProbeProtectedParametersBuilder.CollisionFlagTypes
-
PATH OBSTRUCTED alarm
- ALBEDO_VIEW_FACTOR - Static variable in class nxopen.cae.Result.Quantity
-
- ALEXANDER - Static variable in class nxopen.PhysicalMaterial.Type
-
Alexander material
- algorithmChoice() - Method in interface nxopen.cae.PreTestSensorConfigBuilder
-
Returns the sensor selection algorithm
License requirements: None.
- algorithmType() - Method in interface nxopen.optimization.OptimizationBuilder
-
Returns the algorithm type
License requirements: None.
- algorithmVersion() - Method in interface nxopen.features.Feature
-
- algorithmVersion() - Method in interface nxopen.features.shipdesign.CopyObjectsBuilder
-
Returns the value of algorithm version is used to define the version information.
- algorithmVersion() - Method in interface nxopen.features.shipdesign.CopyPasteNewBuilder
-
Returns the value of algorithm version is used to define the version information.
- alias() - Method in interface nxopen.AttributeTemplatesBuilder
-
Returns the Alias.
- alias() - Method in interface nxopen.mechatronics.RuntimeFormulaParameterBuilder
-
Returns the Alias
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- aliasName - Variable in class nxopen.mechatronics.SignalAdapterBuilder.ParameterData
-
Alias Name
- align() - Method in interface nxopen.drawings.ViewStyleDetailBuilder
-
Returns the align toggle on the DETAIL tab of the View Style Dialog
License requirements: None.
- align() - Method in interface nxopen.drawings.ViewStyleProjectedBuilder
-
Returns the projected view style align toggle on the PROJECTED tab of the View Style Dialog
License requirements: None.
- align() - Method in interface nxopen.drawings.ViewStyleSectionConstraintsBuilder
-
Returns the align toggle on the SECTION CONSTRAINTS tab of the View Style Dialog
License requirements: None.
- ALIGN - Static variable in class nxopen.features.MatchEdgeBuilder.MatchExact
-
Match align without change degree and patch
- ALIGN - Static variable in class nxopen.tooling.DieBaseBuilder.DesignToolOption
-
align sub die base
- ALIGN - Static variable in class nxopen.uf.UFSket.ConType
-
- ALIGN_AXIS_TO_VECTOR - Static variable in class nxopen.formboard.OrientBranchBuilder.BranchAngleMethod
-
method to rotate branch by an angle between two vectors
- ALIGN_AXIS_VECTOR - Static variable in class nxopen.geometricutilities.ModlMotion.Options
-
Move by Align Axis to Vector
- ALIGN_BOTTOM_CENTER - Static variable in class nxopen.uf.UFDrf.AlignPosition
-
- ALIGN_BOTTOM_LEFT - Static variable in class nxopen.uf.UFDrf.AlignPosition
-
- ALIGN_BOTTOM_RIGHT - Static variable in class nxopen.uf.UFDrf.AlignPosition
-
- ALIGN_LOCK - Static variable in class nxopen.positioning.Constraint.Type
-
Two geometries are constrained to have a common axis and no rotation about it
- ALIGN_MID_CENTER - Static variable in class nxopen.uf.UFDrf.AlignPosition
-
- ALIGN_MID_LEFT - Static variable in class nxopen.uf.UFDrf.AlignPosition
-
- ALIGN_MID_RIGHT - Static variable in class nxopen.uf.UFDrf.AlignPosition
-
- ALIGN_NORMAL - Static variable in class nxopen.features.subdivision.SubdivisionProjectCageBuilder.Types
-
Align edges normal to the specified plane
- ALIGN_TO_EDGES - Static variable in class nxopen.cam.ToolAxisVariable.Types
-
Align to almost straight edges
- ALIGN_TOP_CENTER - Static variable in class nxopen.uf.UFDrf.AlignPosition
-
- ALIGN_TOP_LEFT - Static variable in class nxopen.uf.UFDrf.AlignPosition
-
- ALIGN_TOP_RIGHT - Static variable in class nxopen.uf.UFDrf.AlignPosition
-
- ALIGN_VECTORS - Static variable in class nxopen.cae.NodeTranslateBuilder.MethodType
-
align vectors
- ALIGN_WITH_FLOOR_PLANE - Static variable in class nxopen.display.EnvironmentBuilder.ImageUpVectorTypes
-
- ALIGN_WITH_FLOOR_PLANE - Static variable in class nxopen.display.ImageBasedLighting.ImageUpVectorTypes
-
- ALIGN_WITH_GUIDE_FACE - Static variable in class nxopen.features.AeroRibBuilder.RibForms
-
Rib form align with guide face
- ALIGN_WITH_PROBE - Static variable in class nxopen.cam.InspectionUVGridBuilder.SphereAxisType
-
Align with probe axis
- alignAdvVisViewFacetsAlongEdges() - Method in interface nxopen.preferences.PartVisualizationShade
-
Returns the state of whether facets should be aligned along common edges for Advanced Visualization Views
License requirements: None.
- alignAt() - Method in interface nxopen.features.shipdesign.OrientationAngleMethodsBuilder
-
Returns the indication if the region should be aligned with the adjacent region at the start of this region, or with the adjacent
region at the end of this region.
- alignAxis() - Method in interface nxopen.geometricutilities.AlignmentMethodBuilder
-
Returns the alignment axis
License requirements: None.
- AlignBeamElementDirectionBuilder - Interface in nxopen.cae.modelcheck
-
- AlignBeamElementDirectionBuilder.ConnectedElementScope - Class in nxopen.cae.modelcheck
-
the options to define the connection scope to the seed element for model checking
- alignBodies() - Method in interface nxopen.mechatronics.PhysicsManager
-
- AlignBody - Interface in nxopen.mechatronics
-
Represents the Align Body.
- AlignBodyBuilder - Interface in nxopen.mechatronics
-
- AlignBodyBuilder.RoleType - Class in nxopen.mechatronics
-
the Snap role types.
- AlignBodyCollection - Interface in nxopen.mechatronics
-
Represents a collection of Align Body.
- alignBreakPoints() - Method in interface nxopen.geometricutilities.FtmTransformCurvesBuilder
-
Returns the option for aligning break points used in the transformation or morphing calculations
License requirements: None.
- alignCurve() - Method in interface nxopen.geometricutilities.AlignmentMethodBuilder
-
Returns the align curve
License requirements: None.
- alignDirectionOfLoop(Point3d, Vector3d) - Method in interface nxopen.Section
-
Set the direction of a single loop of the section along the given vector.
- alignDirections() - Method in interface nxopen.cae.modelcheck.AlignBeamElementDirectionBuilder
-
Aligns the directions of elements connected to the seed element.
- ALIGNED - Static variable in class nxopen.annotations.TextOrientation
-
Specifies dimenson text aligned with the dimension line
- ALIGNED - Static variable in class nxopen.cam.TrimPoint.RampAngleOptions
-
Ramp angle is aligned to angle.
- ALIGNED - Static variable in class nxopen.drawings.ViewStyleFPCalloutConfigBuilder.OrientationType
-
Aligned
- ALIGNED - Static variable in class nxopen.features.MeshTransformerBuilder.MeshTopologyType
-
Aligned
- ALIGNED - Static variable in class nxopen.features.shipdesign.OrientationAngleMethodsBuilder.MethodTypes
-
Angle is the same as the previous or following region.
- ALIGNED - Static variable in class nxopen.preferences.PartFlexiblePrintedCircuitDesign.FlatPatternCalloutOrientationType
-
Aligned
- ALIGNED - Static variable in class nxopen.preferences.PartSheetmetal.FlatPatternCalloutOrientationType
-
Aligned
- ALIGNED - Static variable in class nxopen.tooling.AutoDimensionBuilder.TextOrientationType
-
- ALIGNED_BOUNDARY - Static variable in class nxopen.features.shipdesign.StiffenerBySupportPathBuilder.Method
-
Aligned Boundary
- ALIGNED_BY_ANGLE - Static variable in class nxopen.MeshParameterData.Type
-
- ALIGNED_BY_ARCLENGTH - Static variable in class nxopen.MeshParameterData.Type
-
- ALIGNED_BY_DISTANCE - Static variable in class nxopen.MeshParameterData.Type
-
- ALIGNED_BY_PARAMETER - Static variable in class nxopen.MeshParameterData.Type
-
- ALIGNED_BY_POINT - Static variable in class nxopen.MeshParameterData.Type
-
- ALIGNED_BY_SEGMENT - Static variable in class nxopen.MeshParameterData.Type
-
- ALIGNED_BY_SPINE - Static variable in class nxopen.MeshParameterData.Type
-
- ALIGNED_BY_SPLINE_PT - Static variable in class nxopen.MeshParameterData.Type
-
- ALIGNED_LENGTH - Static variable in class nxopen.features.shipdesign.StiffenerBySupportPathBuilder.Method
-
Aligned Length
- ALIGNED_NOSTUB - Static variable in class nxopen.annotations.LeaderType
-
- ALIGNED_WITH_ARROWS - Static variable in class nxopen.annotations.AssociativeOriginType
-
- alignedAnnotation - Variable in class nxopen.annotations.Annotation.AssociativeOriginData
-
Alignment annotation.
- alignedAnnotation - Variable in class nxopen.uf.UFDrf.AssociativeOrigin
-
- alignedCenterlines() - Method in interface nxopen.annotations.Centerline3dBuilder
-
Returns the aligned centerlines, applicable only for creation
License requirements: None.
- alignFloorPlane(Plane) - Method in interface nxopen.display.EnvironmentBuilder
-
The environment's floor aligns with the given plane.
- alignFloorPlane(Plane) - Method in interface nxopen.display.Stage
-
The stage's bottom wall (floor) aligns with the given plane.
- alignImageToReferenceDirection() - Method in interface nxopen.display.ImageBaseBuilder
-
Align Image to Reference Direction
License requirements: None.
- alignIndex - Variable in class nxopen.features.MeshSurfaceBuilder.ProfilePointAlignmentData
-
Alignment indices
- aligningMomentArm() - Method in interface nxopen.motion.TirePropertyAdvancedParameters
-
Returns the aligning moment arm.
- aligningMomentArm() - Method in interface nxopen.motion.TirePropertyNonInertialBuilder
-
Returns the aligning moment arm.
- alignMachineAxes() - Method in interface nxopen.cam.InspectionPolarGridBuilder
-
Returns the flag to align with machine axes
License requirements: None.
- alignMachineAxes() - Method in interface nxopen.cam.InspectionUVGridBuilder
-
Returns the flag to align with machine axes
License requirements: None.
- alignment() - Method in interface nxopen.cae.xyplot.TextStyleSetting
-
Returns the text alignment.
- ALIGNMENT - Static variable in class nxopen.cam.TurnRoughFinishLocalReturnBuilder.AdjustmentModeTypes
-
Ajustment: Alignment
- alignment() - Method in interface nxopen.features.ThroughCurvesBuilder
-
Returns the alignment.
- alignment() - Method in interface nxopen.geometricanalysis.sectionanalysis.SectionAnalysisExBuilder
-
Returns the alignment type
License requirements: None.
- alignment - Variable in class nxopen.uf.UFModlFeatures.AskRuled1Data
-
- alignment - Variable in class nxopen.uf.UFModlFeatures.AskRuledData
-
- alignment - Variable in class nxopen.uf.UFModlFeatures.AskSweepData
-
- alignment - Variable in class nxopen.uf.UFModlFeatures.AskThruCurves1Data
-
- alignment - Variable in class nxopen.uf.UFModlFeatures.AskThruCurvesData
-
- alignmentAngle() - Method in interface nxopen.features.shipdesign.BracketBuilder
-
Returns the alignment angle along attachment entity.
- alignmentBodies() - Method in interface nxopen.facet.MultiPatchAlignmentBuilder
-
Returns the facet bodies to be aligned.
- alignmentMethod() - Method in interface nxopen.cae.ContactMeshBuilder
-
Returns the alingment method
License requirements: None.
- alignmentMethod() - Method in interface nxopen.drawings.ViewPlacementBuilder
-
Returns the alignment method
License requirements: None.
- alignmentMethod() - Method in interface nxopen.features.RuledBuilder
-
Returns the alignment method
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- alignmentMethod() - Method in interface nxopen.features.StudioSurfaceBuilder
-
Returns the alignment method
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- alignmentMethod() - Method in interface nxopen.features.StudioSurfaceBuilderEx
-
Returns the alignment method
License requirements: None.
- alignmentMethod() - Method in interface nxopen.features.SweptBuilder
-
Returns the alignment method.
- alignmentMethod() - Method in interface nxopen.routing.AlignStockBuilder
-
Returns the alignment method.
- AlignmentMethodBuilder - Interface in nxopen.geometricutilities
-
- AlignmentMethodBuilder.AlignFillerSurfaceType - Class in nxopen.geometricutilities
-
Filler surface types
- AlignmentMethodBuilder.AllPointsData - Class in nxopen.geometricutilities
-
- AlignmentMethodBuilder.Type - Class in nxopen.geometricutilities
-
Alignment types supported
- alignmentOption() - Method in interface nxopen.drawings.ViewPlacementBuilder
-
Returns the alignment option used to indicate what points in the views to align.
- alignmentOption() - Method in interface nxopen.features.AestheticFaceBlendBuilder
-
Returns the alignment option
License requirements: None.
- alignmentPlane() - Method in interface nxopen.features.shipdesign.BracketBuilder
-
Returns the alignment plane.
- alignmentPoint() - Method in interface nxopen.drawings.ViewPlacementBuilder
-
Returns the point to align to.
- AlignmentPosition - Class in nxopen.annotations
-
Specifies the site location in the text box which
can be used to locate a drafting object
- alignmentPosition() - Method in interface nxopen.annotations.LetteringPreferences
-
Returns the align position
License requirements: None.
- alignmentPosition() - Method in interface nxopen.annotations.TableSectionStyleBuilder
-
Returns the alignment Position settings of the section
License requirements: None.
- alignmentPosition() - Method in interface nxopen.annotations.TitleBlockPreferences
-
Returns the alignment position
License requirements: None.
- alignmentPosition - Variable in class nxopen.uf.UFDrf.ImageData
-
- alignmentType() - Method in interface nxopen.cam.InspectionAlignmentAssistantBuilder
-
Returns the alignment type
License requirements: None.
- alignmentType() - Method in interface nxopen.features.shipdesign.BracketBuilder
-
Returns the bracket alignment type.
- alignmentType() - Method in interface nxopen.MeshParameterData
-
Returns
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- alignmentType() - Method in interface nxopen.SketchAlignmentConstraint
-
Returns the alignment type of the constraint.
- alignmentVector() - Method in interface nxopen.drawings.ViewPlacementBuilder
-
Returns the vector to align along.
- alignmentVectors - Variable in class nxopen.uf.UFDraw.BreakRegionData
-
- alignmentView() - Method in interface nxopen.drawings.ViewPlacementBuilder
-
Returns the view to align to.
- alignNegative(WeldFillStripBuilder) - Method in interface nxopen.weld.WeldFillStripBuilder
-
Aligns the end of the fill strip, opposite of the length direction from center, to the
same end of the input fill strip.
- alignNormals() - Method in interface nxopen.cae.modelcheck.AlignShellElementNormalBuilder
-
Aligns the normals of elements connected to the seed element.
- alignOpName() - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
Returns the align op name
License requirements: None.
- alignParams - Variable in class nxopen.features.MeshSurfaceBuilder.ProfilePointAlignmentData
-
Alignment parameters
- alignpoints - Variable in class nxopen.geometricutilities.AlignmentMethodBuilder.AllPointsData
-
Gets all the points, numPoints is total number of points, not points per section
- alignPosition() - Method in interface nxopen.annotations.LetteringStyleBuilder
-
Returns the alignment position
License requirements: None.
- alignPosition - Variable in class nxopen.uf.UFDrf.LetteringPreferences
-
- alignPositive(WeldFillStripBuilder) - Method in interface nxopen.weld.WeldFillStripBuilder
-
Aligns the end of the fill strip, along the length direction from center, to the
same end of the input fill strip.
- alignRefType0() - Method in interface nxopen.features.AeroFlangeBuilder
-
Returns the align ref type0
License requirements: None.
- alignRefType0() - Method in interface nxopen.features.AeroRibBuilder
-
Returns the align ref type0
License requirements: None.
- alignRefType1() - Method in interface nxopen.features.AeroFlangeBuilder
-
Returns the align ref type1
License requirements: None.
- alignRefType1() - Method in interface nxopen.features.AeroRibBuilder
-
Returns the align ref type1
License requirements: None.
- alignShadedViewFacetsAlongEdges() - Method in interface nxopen.preferences.PartVisualizationShade
-
Returns the state of whether facets should be aligned along common edges for Shaded Views
License requirements: None.
- AlignShellElementFirstEdgeBuilder - Interface in nxopen.cae.modelcheck
-
- AlignShellElementFirstEdgeBuilder.ElemSelectionMode - Class in nxopen.cae.modelcheck
-
the options to define the connection scope to the seed element for model checking
- AlignShellElementNormalBuilder - Interface in nxopen.cae.modelcheck
-
- AlignShellElementNormalBuilder.ConnectedElementScope - Class in nxopen.cae.modelcheck
-
the options to define the connection scope to the seed element for model checking
- alignStartOrientation() - Method in interface nxopen.die.DrawDiePunchBuilder
-
Returns the align start orientation switch of the draw die punch casting, if true use the alignment point to define the start of the punch profile,
if false use the default algorithm to define the start of the punch profile.
- alignsToCheck - Variable in class nxopen.uf.UFAssem.FindPrev16AlignsToCheckData
-
- alignStock(Vector3d) - Method in interface nxopen.routing.Stock
-
Align stock to new rotation vector.
- alignStock(Tag, double[]) - Method in interface nxopen.uf.UFRoute
-
- AlignStockBuilder - Interface in nxopen.routing
-
- AlignStockBuilder.StockAlignmentMethod - Class in nxopen.routing
-
Methods of aligning stocks.
- alignSymbolWithBaseline() - Method in interface nxopen.annotations.OrdinateDimensionPreferences
-
Returns the flag indicating whether to align the user defined symbol with the
base line
License requirements: None.
- alignSymbolWithBaseline() - Method in interface nxopen.annotations.OrdinateStyleBuilder
-
Returns the align symbol with baseline preference
License requirements: None.
- alignTargetEdgeNode - Variable in class nxopen.uf.UFSf.ContactMeshData
-
- alignTargetEdgeNodes() - Method in interface nxopen.cae.ContactMeshBuilder
-
Returns a flag to align target edge nodes
License requirements: None.
- alignToAbsoluteCoordinateSystem() - Method in interface nxopen.geometricutilities.TransformerData
-
Reorient the tool by aligning it to absolute coordinate system
License requirements: solid_modeling ("SOLIDS MODELING")
.
- alignToWorkCoordinateSystem() - Method in interface nxopen.geometricutilities.TransformerData
-
Reorient the tool by aligning it to work coordinate system
License requirements: solid_modeling ("SOLIDS MODELING")
.
- alignType() - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
Returns the alignment type
License requirements: None.
- alignType() - Method in interface nxopen.geometricutilities.AlignmentMethodBuilder
-
Returns the alignment type
License requirements: None.
- alignVector() - Method in interface nxopen.features.shipdesign.OrientationAngleMethodsBuilder
-
Returns the vector used to calculate the angle by aligning to this vector.
- alignVector() - Method in interface nxopen.geometricutilities.AlignmentMethodBuilder
-
Returns the alignment vector
License requirements: None.
- alignVector() - Method in interface nxopen.geometricutilities.ModlMotion
-
- ALIGNWITH_REFERENCE_FACE - Static variable in class nxopen.features.ShelfBuilder.StepMethod
-
- ALIGNWITH_REFERENCE_FACE - Static variable in class nxopen.features.StepBuilder.StepFaceMethods
-
Aligns the step face with the reference face
- ALL - Static variable in class nxopen.ame.ChildrenEvaluatorBuilder.FilterType
-
- ALL - Static variable in class nxopen.ame.LineDesignerMappingBuilder.FilterType
-
- ALL - Static variable in class nxopen.ame.PlcSymbolsEvaluatorBuilder.FilterType
-
- ALL - Static variable in class nxopen.ame.PortBuilder.ConnectableAttrProxyObjectType
-
- ALL - Static variable in class nxopen.ame.PortBuilder.Type
-
- ALL - Static variable in class nxopen.annotations.HoleTableSettingsFormatBuilder.ShowColumnsType
-
All
- ALL - Static variable in class nxopen.annotations.InspectionSymbolAroundAppendedText
-
Include all appended texts
- ALL - Static variable in class nxopen.annotations.OrdinateLineArrowDisplayOption
-
Displays both the line and arrow
- ALL - Static variable in class nxopen.annotations.OrdinatePositiveDirection
-
Specifies positive direction for all dimensions
- ALL - Static variable in class nxopen.annotations.PmiFilter.ComponentMethod
-
Specifies all components will be used
- ALL - Static variable in class nxopen.annotations.SearchCriteriaDimensionBuilder.MeasurementTypes
-
Linear ALL
- ALL - Static variable in class nxopen.annotations.SymbolStyleBuilder.FcfTextUnderlineOption
-
- ALL - Static variable in class nxopen.annotations.TableCellStyleBuilder.BorderLocationType
-
- ALL - Static variable in class nxopen.assemblies.ComponentAssembly.SubstitutionMode
-
An associative substitution is performed on all components that
represent the same prototype part.
- ALL - Static variable in class nxopen.assemblies.RelinkerBuilder.LinkType
-
Indicate relink browser type is all
- ALL - Static variable in class nxopen.BasePart.BookmarkOption
-
Write component groups, load options and structure.
- ALL - Static variable in class nxopen.blockstyler.Node.DragType
-
Drag allowed to any level in the same tree
- ALL - Static variable in class nxopen.cae.AssociationUtilities.PrintInfoType
-
print info to a file and to a window
- ALL - Static variable in class nxopen.cae.DurabilityEventOverridesBuilder.UseElementsEnum
-
All
- ALL - Static variable in class nxopen.cae.DurabilityResultsReportBuilder.UseEventsEnum
-
- ALL - Static variable in class nxopen.cae.DurabilitySolverBuilder.ActiveEventSolveOptionsEnum
-
All
- ALL - Static variable in class nxopen.cae.ftk.DataManager.FileContainerType
-
All containers
- ALL - Static variable in class nxopen.cae.Laminate.ZoneType
-
Export all zones
- ALL - Static variable in class nxopen.cae.LaminateSineEventBuilder.NaturalFrequeciesEnum
-
Select all natural frequencies
- ALL - Static variable in class nxopen.cae.MeshControlBuilder.SizeTypes
-
- ALL - Static variable in class nxopen.cae.modelcheck.DuplicateNodesCheckBuilder.ListOption
-
List all duplicate node pairs found
- ALL - Static variable in class nxopen.cae.modelcheck.ElementQualityCheckBuilder.ReportFormat
-
Lists check results for all elements
- ALL - Static variable in class nxopen.cae.ModelDisplayBuilder.NodeMeshShowHideOptionType
-
All
- ALL - Static variable in class nxopen.cae.ModelUpdateSolution.TargetType
-
Export all the targets to the csv file
- ALL - Static variable in class nxopen.cae.NodalForceReportBuilder.LoadcaseSelection
-
- ALL - Static variable in class nxopen.cae.optimization.Category
-
Model constraints
- ALL - Static variable in class nxopen.cae.optimization.TBSGroupDefinition.DefinitionType
-
Defines a group with all nodes or elements
- ALL - Static variable in class nxopen.cae.optimization.TBSOutputControlOptions.Op2Option
-
Output op2 results of all iterations
- ALL - Static variable in class nxopen.cae.optimization.TBSSmoothBuilder.SliceFormatOption
-
Save slices in all formats mentioned above
- ALL - Static variable in class nxopen.cae.ProjectNodesToCadGeometryBuilder.ListingOption
-
List All information on nodes that are off the CAD geometry by more than the input tolerance
- ALL - Static variable in class nxopen.cae.responsesimulation.DirectionDataComponent
-
- ALL - Static variable in class nxopen.cae.responsesimulation.NodalFunctionEvalBeamLocation
-
All four Stress Recovery points on a beam cross section
- ALL - Static variable in class nxopen.cae.responsesimulation.NodalFunctionEvalShellLocation
-
All three layers
- ALL - Static variable in class nxopen.cae.Result.Section
-
- ALL - Static variable in class nxopen.cae.ResultProbeBuilder.IterationSelection
-
- ALL - Static variable in class nxopen.cae.ResultProbeBuilder.IterationType
-
- ALL - Static variable in class nxopen.cae.ResultProbeBuilder.LoadcaseSelection
-
- ALL - Static variable in class nxopen.cae.Type
-
compute all edge types
- ALL - Static variable in class nxopen.cam.CutRegionsBuilder.CutRegionsContainmentTypes
-
All
- ALL - Static variable in class nxopen.cam.CutRegionsBuilder.CutRegionsProgramTypes
-
All
- ALL - Static variable in class nxopen.cam.CutRegionsBuilder.CutRegionsStatusTypes
-
All
- ALL - Static variable in class nxopen.cam.CutSides.SideType
-
All Sides
- ALL - Static variable in class nxopen.cam.GeometrySet.LoopsIgnoreTypes
-
Deprecated.
all
- ALL - Static variable in class nxopen.cam.GroupFeatures.FeaturesToGroupTypes
-
- ALL - Static variable in class nxopen.cam.RoughTurningBuilder.CleanupTypes
-
Cleanup mode: All
- ALL - Static variable in class nxopen.cam.SimulationOptionsBuilder.SimulationDisplayMode
-
show all
- ALL - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all of the following objects
- ALL - Static variable in class nxopen.drawings.DraftingViewCollection.ViewUpdateOption
-
Updates all views in scope (part or drawing sheet).
- ALL - Static variable in class nxopen.drawings.DrawingRegionBuilder.ContentToMove
-
- ALL - Static variable in class nxopen.drawings.ViewProjectedViewSettingsBuilder.DisplayArrowOnParentViewType
-
- ALL - Static variable in class nxopen.DxfdwgImporter.ConvLayoutsAs
-
Convert all layouts
- ALL - Static variable in class nxopen.features.DatumAxisBuilder.FixedType
-
Fixed datum axis thru all Axis
- ALL - Static variable in class nxopen.features.DatumPlaneBuilder.FixedType
-
Fixed datum plane thru all planes
- ALL - Static variable in class nxopen.features.DraftBodyBuilder.MatchingScope
-
All faces-to-draft are to be matched
- ALL - Static variable in class nxopen.features.DraftBodyBuilder.MatchOption
-
All faces-to-draft are to be matched
- ALL - Static variable in class nxopen.features.shipdesign.PlateBuilder.RegionOptions
-
- ALL - Static variable in class nxopen.features.shipdesign.ProfileListBuilder.OutputTypes
-
- ALL - Static variable in class nxopen.features.shipdesign.ShipIntersectionsBuilder.Type
-
- ALL - Static variable in class nxopen.features.shipdesign.ShipSectionBuilder.XFilter
-
- ALL - Static variable in class nxopen.features.shipdesign.ShipSectionBuilder.ZFilter
-
- ALL - Static variable in class nxopen.features.StudioXformBuilderEx.ProportionalPoleControlType
-
All poles are moved
- ALL - Static variable in class nxopen.features.subdivision.DefineWorkRegionBuilder.WorkRegionDefinitionMethods
-
Treat all the region as work region
- ALL - Static variable in class nxopen.features.subdivision.TransformCageData.FallOffMethodType
-
All vertices falloff
- ALL - Static variable in class nxopen.features.vehicledesign.MirrorCertificationBuilder.ShowVisionConeType
-
Represents both of Eye-Mirror and Mirror Target vision cones are shown
- ALL - Static variable in class nxopen.fields.DisplayPropertiesBuilder.DepLabelValueEnum
-
- ALL - Static variable in class nxopen.fields.FieldEvaluator.InverseDistanceWeightingEnum
-
Sum of the weighted value of all points, based on the inverse of the distance
- ALL - Static variable in class nxopen.geometricanalysis.DeviationGaugeBuilder.AdditionalValuesLabelType
-
All
- ALL - Static variable in class nxopen.geometricutilities.OnPathDimensionBuilder.UpdateReason
-
Update because either path or through point location may have changed
- ALL - Static variable in class nxopen.HumanData.EditDisplayBodyParts
-
Indicate edit display body parts named all
- ALL - Static variable in class nxopen.Information.DisplayFeatureType
-
Displays all the information.
- ALL - Static variable in class nxopen.JtCreator.FileWrite
-
ALL
- ALL - Static variable in class nxopen.JtCreator.RefsetOption
-
ALL
- ALL - Static variable in class nxopen.layout2d.Layout2dComponentMemberType
-
- ALL - Static variable in class nxopen.LoadOptions.LoadComponents
-
load all components
- ALL - Static variable in class nxopen.LoadOptions.Parent
-
Recursively fully load all parts with parent geometry linked
to geometry in the parts selected for loading
- ALL - Static variable in class nxopen.motion.ActiveView
-
Articulation or Spreadsheet Run in all views
- ALL - Static variable in class nxopen.motion.JointFrictionAdams.FrictionEffect
-
- ALL - Static variable in class nxopen.motion.JointFrictionRecurDyn.FrictionEffect
-
- ALL - Static variable in class nxopen.PartCleanup.CleanupParts
-
clean up all loaded parts
- ALL - Static variable in class nxopen.PartCleanup.DeleteGroups
-
delete all the empty groups
- ALL - Static variable in class nxopen.pdm.NonMasterData.CopyNonMasterPartsOption
-
save all during save as
- ALL - Static variable in class nxopen.pdm.PartFromPartBuilder.FileSaveAs
-
save all during save as
- ALL - Static variable in class nxopen.pdm.PartOperationBuilder.DependentFileSaveAs
-
Deprecated.
save all during save as
- ALL - Static variable in class nxopen.pdm.PartOperationBuilder.NonMasterSaveAs
-
Deprecated.
save all during save as
- ALL - Static variable in class nxopen.pdm.PartOperationCopyBuilder.CopyDependentFiles
-
save all during save as
- ALL - Static variable in class nxopen.pdm.PartOperationCopyBuilder.CopyNonMasterParts
-
Deprecated.
save all during save as
- ALL - Static variable in class nxopen.preferences.ReferenceSetBehavior
-
Inherit all PMI regardless of whether the referenced objects are in the active reference set.
- ALL - Static variable in class nxopen.preferences.RoutingElectrical.CreateTerminalsType
-
Create terminals to all terminals
- ALL - Static variable in class nxopen.preferences.SessionModeling.ImmediateChildrenType
-
Indicates that Immediate Children type is at all level
- ALL - Static variable in class nxopen.presslinesimulation.MountPointBuilder.GeometrySelectionFilterType
-
Everything can be selected.
- ALL - Static variable in class nxopen.routing.StockBrowserBuilder.TypeFilter
-
All Stocks
- ALL - Static variable in class nxopen.Selection.SelectionType
-
Filter to select all object types
- ALL - Static variable in class nxopen.sim.KinematicSinumerikCaBuilder.PlcUsageTypes
-
All
- ALL - Static variable in class nxopen.Step242Importer.MessageEnum
-
- ALL - Static variable in class nxopen.tooling.BomListDataProvider.ExportedStatus
-
All parts in the row are exported
- ALL - Static variable in class nxopen.tooling.CompDrawingBuilder.ComponentTypeSelection
-
the type of components, read from configuration file
- ALL - Static variable in class nxopen.tooling.CompDrawingBuilder.FilterSelection
-
list all components
- ALL - Static variable in class nxopen.tooling.EjectorTableBuilder.EjectorType
-
all ejectors
- ALL - Static variable in class nxopen.tooling.ScrapDesignBuilder.RemoveType
-
Captures any kind of scraps
- ALL - Static variable in class nxopen.weld.ConnectionFinderBuilder.FilterTypes
-
- ALL_ACTIVE_MEMBER_VIEWS - Static variable in class nxopen.display.TransientText.ViewType
-
- ALL_ACTIVE_VIEWS - Static variable in class nxopen.display.TransientText.ViewType
-
- ALL_AND_DISABLE_SPECIFIC - Static variable in class nxopen.Selection.SelectionAction
-
Select all objects except for selected objects
- ALL_AROUND - Static variable in class nxopen.annotations.ArcComponent.ArcType
-
all around
- ALL_AROUND - Static variable in class nxopen.annotations.LeaderData.LeaderType
-
Plain leader style with all around symbol
- ALL_AROUND - Static variable in class nxopen.annotations.LineWeldBuilder.WeldSymbolWeldAlongContourType
-
- ALL_AROUND - Static variable in class nxopen.annotations.StubSymbolType
-
All around symbol
- ALL_ASSOC_OCC_LOADED - Static variable in class nxopen.annotations.DisplayPmiEffectivityMethod
-
- ALL_AXES - Static variable in class nxopen.cam.HoleMakingBuilder.ToolAxisTypes
-
Tool axis mode: All axes
- ALL_AXES - Static variable in class nxopen.cam.OrientGeomBuilder.ToolAxisModes
-
Tool axis mode: All axes
- ALL_BODIES - Static variable in class nxopen.cae.FemCreationOptions.UseBodiesOption
-
Use all bodies from the cad part
- ALL_BODIES - Static variable in class nxopen.cae.FemPart.UseBodiesOption
-
Use all bodies from the cad part
- ALL_BODY_FACES - Static variable in class nxopen.features.ExtractFaceBuilder.FaceOptionType
-
all faces of body option
- ALL_BUT_DEFAULT - Static variable in class nxopen.preferences.PartObject.ObjectType
-
All But Default
- ALL_BUT_LAST_PASS - Static variable in class nxopen.cam.CornerControlBuilder.SmoothingOptions
-
all but last pass
- ALL_BUT_LEVEL - Static variable in class nxopen.cam.RoughTurningBuilder.CleanupTypes
-
Cleanup mode: All but level
- ALL_BUT_SELECTED - Static variable in class nxopen.features.DraftBodyBuilder.MatchingScope
-
All faces-to-draft except the ones explicitly indicated are to be matched
- ALL_BUT_SELECTED - Static variable in class nxopen.features.DraftBodyBuilder.MatchOption
-
All faces-to-draft except the ones explicitly indicated are to be matched
- ALL_BUT_SELECTED_OBJECTS - Static variable in class nxopen.assemblies.ClearanceAnalysisBuilder.CollectionRange
-
- ALL_BUT_STEEP - Static variable in class nxopen.cam.RoughTurningBuilder.CleanupTypes
-
Cleanup mode: All but steep
- ALL_CELLSIN_COLUMN - Static variable in class nxopen.annotations.TableColumnBuilder.ScopeType
-
- ALL_COMMON_PRODUCTS - Static variable in class nxopen.ame.ProductSelectionBuilder.Type
-
- ALL_COMPONENTS - Static variable in class nxopen.cae.Result.TensorDerivedAbsolute
-
Absolute of primary components first
- ALL_CONS - Static variable in class nxopen.uf.UFSket.ConClass
-
- ALL_CORNERPOINTS - Static variable in class nxopen.features.DivideCurveBuilder.CornerOption
-
All Cornerpoints
- ALL_CURVES - Static variable in class nxopen.features.SmoothCurveStringBuilder.MergeTypes
-
merge all types of curves
- ALL_DATA_COMPONENTS - Static variable in class nxopen.cae.responsesimulation.DirectionDataComponent
-
- ALL_DATUM_TYPES - Static variable in class nxopen.uf.UFProcessAid.Types
-
- ALL_DEVIATION - Static variable in class nxopen.Measurement.DeviationReportType
-
All Deviation
- ALL_DEVIATIONS - Static variable in class nxopen.geometricanalysis.DeviationChecking.DeviationOptions
-
show all
deviations
- ALL_DIRECTIONS - Static variable in class nxopen.cae.responsesimulation.DirectionDataComponent
-
- ALL_ELEMENTS - Static variable in class nxopen.cae.AlternateFemRepresentationSource.CreateMeshMode
-
create all elements
- ALL_ELEMENTS_ATTACHED_TO_NODE - Static variable in class nxopen.cae.ElementConnectivityBuilder.Types
-
Modify connectivities of all attached elements to nodes.
- ALL_EXPRESSIONS - Static variable in class nxopen.cae.optimization.DAODesignVariableBuilder.Variable
-
Variables from FEM, SIM and master part
- ALL_FACES_OF_BODY - Static variable in class nxopen.uf.UFSurfReg.Type
-
- ALL_FINISH_PASSES - Static variable in class nxopen.cam.Cutcom.Types
-
cutter compensation on all finish passes
- ALL_FINISH_PASSES - Static variable in class nxopen.cam.NcmPlanarBuilder.CutcomTypes
-
cutter compensation on all finish passes
- ALL_FORCE_DIRECTION_SENSOR - Static variable in class nxopen.motion.TextBasedElementBuilder.TypeChoices
-
- ALL_FORCES - Static variable in class nxopen.cae.responsesimulation.DirectionDataComponent
-
- ALL_GEOMETRY - Static variable in class nxopen.cam.FeatureRecognitionBuilder.GeometrySearch
-
Search for features in all geometry
- ALL_GEOMETRY - Static variable in class nxopen.uf.UFGdt.GeometricDefinitionType
-
- ALL_IN_ASSY_TREE - Static variable in class nxopen.ExpressionCollection.ExportMode
-
All expressions in the given part, and in its components
- ALL_KINEMATIC_DIRECTION_SENSOR - Static variable in class nxopen.motion.TextBasedElementBuilder.TypeChoices
-
- ALL_KNOTPOINTS - Static variable in class nxopen.features.DivideCurveBuilder.KnotPointOption
-
All Knotpoints
- ALL_LEGS - Static variable in class nxopen.cae.responsesimulation.DirectionDataComponent
-
- ALL_LEVELS - Static variable in class nxopen.assemblies.LoadInterpartDataBuilder.OpenUnloadedParentsType
-
Load all partially loaded parts
that contain links and all level
parent parts regardless of load status
- ALL_MEMBERS - Static variable in class nxopen.features.ColorFeatureGroupBuilder.ProcessType
-
set color and apply to all members
- ALL_MOVES - Static variable in class nxopen.cam.FeedsWedmBuilder.OutputTypes
-
- ALL_NAMED - Static variable in class nxopen.JtCreator.RefsetOption
-
ALL_NAMED
- ALL_NORMALS - Static variable in class nxopen.cae.responsesimulation.DirectionDataComponent
-
- ALL_OBJECT - Static variable in class nxopen.preferences.PartVisualizationShade.ViewUpdateModeType
-
Applicable to all object
- ALL_OBJECTS - Static variable in class nxopen.assemblies.ClearanceAnalysisBuilder.CollectionRange
-
- ALL_OBJECTS - Static variable in class nxopen.display.FacetSettingsBuilder.FacetUpdate
-
- ALL_OBJECTS_COPIED - Static variable in class nxopen.gateway.CopyCutBuilder.Status
-
All objects were successfully copied
- ALL_OFFSETS - Static variable in class nxopen.features.vehicledesign.CloseRangeVisibilityBuilder.EyePointOffsetTypes
-
All offsets
- ALL_OVER - Static variable in class nxopen.annotations.ArcComponent.ArcType
-
all over
- ALL_OVER - Static variable in class nxopen.annotations.LeaderData.LeaderType
-
- ALL_OVER - Static variable in class nxopen.annotations.LeaderType
-
- ALL_OVER - Static variable in class nxopen.annotations.StubSymbolType
-
All over symbol
- ALL_OVER - Static variable in class nxopen.uf.UFGdt.ModifierTypes
-
- ALL_PAIRS - Static variable in class nxopen.cae.MMCCreateBuilder.FaceSearchType
-
all pairs
- ALL_PAIRS - Static variable in class nxopen.geometricanalysis.SimpleInterference.FaceInterferenceMethod
-
Find
all pairs of interfering faces.
- ALL_PARTS - Static variable in class nxopen.ExpressionCollection.ExportMode
-
All expressions in All parts in the session
- ALL_PARTS - Static variable in class nxopen.PartCollection.SetProtectionOn
-
Displayed part and full open components of the part
- ALL_PARTS_IN_DISPLAYED_ASSEMBLY - Static variable in class nxopen.assemblies.LoadInterpartDataBuilder.SelectionScopeType
-
Load interpart data
for all parts in
displayed assembly
- ALL_PARTS_IN_SESSION - Static variable in class nxopen.assemblies.LoadInterpartDataBuilder.SelectionScopeType
-
Load interpart data
for all parts in session
- ALL_PASSES - Static variable in class nxopen.cam.CornerControlBuilder.SmoothingOptions
-
all passes
- ALL_PASSES - Static variable in class nxopen.cam.NcmHoleMachining.CutcomTypes
-
cutter compensation on all passes
- ALL_PASSES - Static variable in class nxopen.cam.WedmGeomBuilder.CornerSmoothingType
-
all passes
- ALL_PASSES - Static variable in class nxopen.cam.WedmOperationBuilder.CornerSmoothingType
-
all passes
- ALL_PLUS_DISPLAY - Static variable in class nxopen.BasePart.BookmarkOption
-
Write component groups, load options, structure and display attributes
- ALL_POINTS - Static variable in class nxopen.features.DatumAxisBuilder.UseArcLength
-
Both points use arclength
- ALL_POINTS - Static variable in class nxopen.features.DatumPlaneBuilder.UseArcLength
-
All points use arclength
- ALL_REGIONS - Static variable in class nxopen.cam.NcmPlanarBuilder.PredrillPointsOutputOptions
-
Pre-Drill Points for all regions
- ALL_REVISIONS - Static variable in class nxopen.assemblies.AssembliesChildRevisionOptions
-
show all revisions of the child parts
- ALL_TRANSLATIONAL - Static variable in class nxopen.cae.responsesimulation.DirectionDataComponent
-
- ALL_TYPES - Static variable in class nxopen.cae.MeshControlBuilder.FilletType
-
- ALL_TYPES - Static variable in class nxopen.cae.RadiusType
-
All fillet types
- ALL_TYPES - Static variable in class nxopen.uf.UFWeld.Types
-
- ALL_UTF8 - Static variable in class nxopen.uf.UFText.ModeS
-
- ALL_VIEWS - Static variable in class nxopen.preferences.PartVisualizationNamesBorders.NameDisplay
-
All Views places all names
in the all views except the
drawing member views
- ALL_VIEWS_BUT_DRAWING - Static variable in class nxopen.display.TransientText.ViewType
-
- ALL_VIOLATIONS - Static variable in class nxopen.routing.DesignRuleViolationViewer.FilterOption
-
will show all violations
- ALL_VISIBLE - Static variable in class nxopen.cae.modelcheck.AlignBeamElementDirectionBuilder.ConnectedElementScope
-
Limits check to only those beam elements which are connected to the Seed Element and are currently visible
- ALL_VISIBLE - Static variable in class nxopen.cae.modelcheck.AlignShellElementNormalBuilder.ConnectedElementScope
-
Limits check to only those shell elements which are connected to the Seed Element and are currently visible
- ALL_VISIBLE_CONNECTED_SHELL_ELEMENTS - Static variable in class nxopen.cae.modelcheck.AlignShellElementFirstEdgeBuilder.ElemSelectionMode
-
- ALL_VISIBLE_OBJECTS - Static variable in class nxopen.assemblies.ClearanceAnalysisBuilder.CollectionRange
-
- ALL_WELDSIN_SCOPE - Static variable in class nxopen.tooldesigner.AssignWeldsBuilder.Menu
-
- ALL_XY_PLANE - Static variable in class nxopen.cae.responsesimulation.DirectionDataComponent
-
- allAround - Variable in class nxopen.uf.UFGdt.LeaderSpec
-
- allAroundDiameter - Variable in class nxopen.uf.UFGdt.LeaderSpec
-
- allAroundSymbol() - Method in interface nxopen.annotations.LineAndArrowPreferences
-
Returns the size of all around symbol.
- allAroundSymbolSize() - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
Returns the size of all around symbol.
- allaroundsymbolsize - Variable in class nxopen.uf.UFDrf.LineArrowPreferences
-
- AllAroundVision - Interface in nxopen.features.vehicledesign
-
Represents an all-around vision feature
To create or edit an instance of this class, use
AllAroundVisionBuilder
Created in NX8.5.0
- AllAroundVisionBuilder - Interface in nxopen.features.vehicledesign
-
- AllAroundVisionBuilder.Types - Class in nxopen.features.vehicledesign
-
Used to indicate the type of obstructing geometry to use.
- AllAroundVisionBuilder.WindowTypes - Class in nxopen.features.vehicledesign
-
Used to indicate the type of geometry used to define the window.
- allAspects() - Method in interface nxopen.ame.EditClauseBuilder
-
Returns the all aspects option status whether ON or OFF
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- AllCustomAttributeNameAndTypesData() - Constructor for class nxopen.features.CustomFeatureData.AllCustomAttributeNameAndTypesData
-
- AllData() - Constructor for class nxopen.routing.HealPath.AllData
-
- AllData() - Constructor for class nxopen.uf.UFBound.AllData
-
- AllData(int, int, Tag, double, double[], double[], UFBound.MemberData[]) - Constructor for class nxopen.uf.UFBound.AllData
-
- allElems() - Method in interface nxopen.cae.NodalForceReportBuilder
-
Returns the all elems
License requirements: None.
- allInstances() - Method in interface nxopen.features.ChamferBuilder
-
Returns the chamfer all instance status
License requirements: None.
- allInstancesOption() - Method in interface nxopen.features.EdgeBlendBuilder
-
Returns the blend all instances option
License requirements: None.
- allLevelsOfDetail() - Method in interface nxopen.VRMLImporter
-
Returns the All Levels of Detail flag.
- allMeshContext() - Method in interface nxopen.cae.ThicknessBuilder
-
Returns the all mesh in context
License requirements: None.
- allNodes() - Method in interface nxopen.cae.NodalForceReportBuilder
-
Returns the all nodes
License requirements: None.
- allocIdealizeParms() - Method in interface nxopen.uf.UFSf
-
- allocIdealizeRegion(Tag, int, Tag[], Tag) - Method in interface nxopen.uf.UFSf
-
- ALLOW - Static variable in class nxopen.blockstyler.Tree.BeginLabelEditState
-
Use this option to allow label edit.
- ALLOW_ADDITIONAL - Static variable in class nxopen.DisplayPartOption
-
If possible display the new part as an additional display part
- ALLOW_ALL_TYPES - Static variable in class nxopen.ApparentChainingRuleSelection
-
- ALLOW_CURVE - Static variable in class nxopen.ApparentChainingRuleSelection
-
- ALLOW_DETACH_ON_CONFLICT - Static variable in class nxopen.mechanicalrouting.MovePathBuilder.DetachTypes
-
- ALLOW_EDGE - Static variable in class nxopen.ApparentChainingRuleSelection
-
- ALLOW_STEP - Static variable in class nxopen.HumanData.InverseKinematicsBalanceType
-
Indicate human is allowed to move one step to keep balance
- allowableGeom - Variable in class nxopen.uf.UFPd.AskDefinitionAllowableGeometryData
-
- allowableThickening() - Method in interface nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder
-
Returns the allowable thickening
License requirements: None.
- allowableThinning() - Method in interface nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder
-
Returns the allowable thinning
License requirements: None.
- allowance() - Method in interface nxopen.geometricutilities.ReplAsstBuilder
-
Returns the deviation allowance for geometric matching
License requirements: None.
- allowanceValue() - Method in interface nxopen.features.shipdesign.MaterialAllowanceBuilder
-
Returns the allowance value to set the material.
- allowArcs() - Method in interface nxopen.routing.ConnectedCurvesBuilder
-
Returns the flag that allows traversal of arcs when finding connected
curves.
- allowBroken() - Method in interface nxopen.weld.FilletBuilder
-
Returns the toggle to allow broken link.
- allowConvergentObject() - Method in interface nxopen.blockstyler.BodyCollector
-
Returns the AllowConvergentObject
License requirements: None.
- allowConvergentObject() - Method in interface nxopen.blockstyler.CurveCollector
-
Returns the AllowConvergentObject
License requirements: None.
- allowConvergentObject() - Method in interface nxopen.blockstyler.FaceCollector
-
Returns the AllowConvergentObject
License requirements: None.
- allowConvergentObject() - Method in interface nxopen.blockstyler.SectionBuilder
-
Returns the AllowConvergentObject
License requirements: None.
- allowConvergentObject() - Method in interface nxopen.blockstyler.SelectObject
-
Returns the AllowConvergentObject
License requirements: None.
- allowConvergentObject() - Method in interface nxopen.blockstyler.SuperPoint
-
Returns the AllowConvergentObject
License requirements: None.
- allowConvergentObject() - Method in interface nxopen.blockstyler.SuperSection
-
Returns the AllowConvergentObject
License requirements: None.
- allowCutElbow() - Method in interface nxopen.routing.LinearPathSettings
-
Returns a flag indicating whether or not to allow cut elbow placement
License requirements: routing_pipetube ("Routing Piping and Tubing")
.
- allowDefaultWidth() - Method in interface nxopen.blockstyler.LineWidth
-
Returns the AllowDefaultWidth
License requirements: None.
- allowDeleteMembers() - Method in interface nxopen.features.FeatureGroup
-
Returns the allow delete members flag of features group.
- allowDeleteMembers() - Method in interface nxopen.features.PartModule
-
Returns the allow delete members flag.
- allowDeselectForSingleSelect() - Method in interface nxopen.blockstyler.ListBox
-
Returns the AllowDeselectForSingleSelect.
- allowDuplicates() - Method in interface nxopen.annotations.BaseOrdinateDimensionBuilder
-
Returns the allow duplicates
License requirements: None.
- allowEditingOfDimensionOfInternalSketch() - Method in interface nxopen.preferences.SessionModeling
-
Returns the option "allow_editing_of_dimension_of_internal_sketch" gives choice,
whether or not the sketch dimensions will display and be possible to select and edit directly,
without entering the Sketch task environment when a dialog (e.g.
- AllowedParentSidesData() - Constructor for class nxopen.diagramming.PortBuilder.AllowedParentSidesData
-
- allowedStepTypeCount() - Method in interface nxopen.cae.SimSolution
-
Returns the count of allowable step types
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- AllowedTransformationsData() - Constructor for class nxopen.diagramming.SheetElementBuilder.AllowedTransformationsData
-
- allowFeetInchFractionForDimensionGreaterThan() - Method in interface nxopen.drafting.AutomationPreferencesBuilder
-
Returns the determination of the feet inch fraction display for dimension greater than
License requirements: None.
- allowgapjumping - Variable in class nxopen.cae.EdgePathMethod.SeedsData
-
if true, gaps between edges will be jumped
- allowgapjumping - Variable in class nxopen.cae.ElemEdgePathMethod.SeedsData
-
if true, gaps between element edges will be jumped
- allowHeadAndEyeRotation() - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder
-
Returns the indication if the head and eye rotation is allowed.
- allowInchFractionToNearest() - Method in interface nxopen.drafting.AutomationPreferencesBuilder
-
Returns the determination of the display for inch fraction to nearest
License requirements: None.
- allowInferredCurveSelection() - Method in interface nxopen.blockstyler.CurveCollector
-
Returns the AllowInferredCurveSelection
License requirements: None.
- allowInferredCurveSelection() - Method in interface nxopen.blockstyler.SectionBuilder
-
Returns the AllowInferredCurveSelection
License requirements: None.
- allowInferredCurveSelection() - Method in interface nxopen.blockstyler.SuperSection
-
Returns the AllowInferredCurveSelection
License requirements: None.
- allowInsideGeometry() - Method in interface nxopen.drafting.AutomationRuleBuilder
-
Returns the allow inside geometry option allows annotation inside geometry
License requirements: None.
- allowInternationalTextInput() - Method in interface nxopen.blockstyler.StringBlock
-
- allowJumpers() - Method in interface nxopen.diagramming.SheetBuilder
-
Returns the flag if jumpers are allowed to use where connections cross.
- allowLines() - Method in interface nxopen.routing.ConnectedCurvesBuilder
-
Returns the flag that allows traversal of lines when finding connected
curves.
- allowManualRows() - Method in interface nxopen.annotations.PartsListBuilder
-
Returns the allow manual rows option that determines whether or not manual rows are allowed to be inserted into a parts list
License requirements: None.
- allowmanualrows - Variable in class nxopen.uf.UFPlist.Prefs
-
- allowMissingComponents - Variable in class nxopen.uf.UFClone.ExLogOpts
-
- allowMultipleConnections() - Method in interface nxopen.routing.Port
-
Returns the Allow Multiple Connections property for a
Port
.
- allowMultipleDisplayedParts() - Method in interface nxopen.PartCollection
-
Returns the option indicating if more than one displayed part is allowed in this session.
- allowMultipleTargetPartitions() - Method in interface nxopen.assemblies.Subset
-
Returns
the allow multiple target partitions property, if set to false (default) only first target partition will be considered
License requirements: nx_4gd_integration ("4th Generation Design")
.
- allowMultipleValues() - Method in interface nxopen.AttributeTemplatesBuilder
-
Returns the flag specifying if an attribute can contain multiple values.
- allowNewCables() - Method in interface nxopen.routing.electrical.CablewaysBuilder
-
Returns the allow new cables toggle
License requirements: routing_cabling ("Routing Cabling")
.
- allowNewDrawing - Variable in class nxopen.uf.UFCgm.ImportOptions
-
- allowNoChangeWidth() - Method in interface nxopen.blockstyler.LineWidth
-
Returns the AllowNoChangeWidth.
- allowNonOrthogonalConnections() - Method in interface nxopen.pid.PreferencesConnectionBuilder
-
Returns the allow non-orthogonal connections.
- allowNonWorkPartFeatureSelection(UFVariant, boolean) - Method in interface nxopen.uf.UFUi
-
- allowOccs() - Method in interface nxopen.routing.ConnectedCurvesBuilder
-
Returns the flag that allows traversal of curve occurrences when finding connected
curves.
- allowOutOfSyncBvrs - Variable in class nxopen.uf.UFClone.ExLogOpts
-
- allowOverFill() - Method in interface nxopen.routing.electrical.CablewaysBuilder
-
Returns the Allow Overfill toggle
License requirements: routing_cabling ("Routing Cabling")
.
- allowOversizeTool() - Method in interface nxopen.cam.HoleMakingBuilder
-
Returns the Allow Oversize Tool flag
License requirements: None.
- allowOwnedObjectSelectionOption() - Method in interface nxopen.userdefinedobjects.UserDefinedClass
-
Returns the allow owned object selection flag.
- allowPatch() - Method in interface nxopen.tooling.EdgePatchBuilder
-
Returns the flag indicating if creating copies for patch surface is allowed.
- allowPostureValueOutOfRange() - Method in interface nxopen.features.vehicledesign.ManikinBuilder
-
Returns the setting to indicate if posture values can be out of the standard range or not,
true indicates the values can be out of range, false indicates the values cannot be out of range.
- allowQueryClassFromName() - Method in interface nxopen.userdefinedobjects.UserDefinedClass
-
Returns the allow query class from name flag.
- allowRemote - Variable in class nxopen.pdm.PdmPart.CheckinInput
-
True to allow remote check in, false otherwise
- allowRemote - Variable in class nxopen.pdm.PdmPart.CheckoutInput
-
True to allow remote check out, false otherwise
- allowRotation() - Method in interface nxopen.linedesigner.PickRectanglePointsBuilder
-
Returns the check for rotaion
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- allowSelfIntersectingSection(boolean) - Method in interface nxopen.features.ExtrudeBuilder
-
SET option for supporting self-intersecting section
License requirements: solid_modeling ("SOLIDS MODELING")
.
- allowSelfIntersection() - Method in interface nxopen.features.CompositeCurveBuilder
-
Returns the self intersection
License requirements: None.
- allowSelfIntersection(boolean) - Method in interface nxopen.Section
-
Allow self intersecting section or not.
- allowShortcuts() - Method in interface nxopen.blockstyler.Enumeration
-
Returns the AllowShortcuts.
- allowSlip() - Method in interface nxopen.mechatronics.CouplingBuilder
-
Returns the coulping can slip or not.
- allowSplines() - Method in interface nxopen.routing.ConnectedCurvesBuilder
-
Returns the flag that allows traversal of splines when finding connected
curves.
- allowStopAtIntersectionFollowFillet() - Method in interface nxopen.blockstyler.SectionBuilder
-
Returns the AllowStopAtIntersectionFollowFillet
License requirements: None.
- allowStopAtIntersectionFollowFillet() - Method in interface nxopen.blockstyler.SuperSection
-
Returns the AllowStopAtIntersectionFollowFillet
License requirements: None.
- allowSubstitution() - Method in interface nxopen.LoadOptions
-
Returns the allow substition option.
- allowTargetEdgesAsToolObjects() - Method in interface nxopen.features.TrimSheetBuilder
-
Returns the allow target edges as tool objects
License requirements: None.
- allowTemporaryPartsToReplace() - Method in interface nxopen.assemblies.ReplaceComponentBuilder
-
Returns the flag to determine whether unsaved parts are allowed to replace.
- allowTransitionCurveOnBlends() - Method in interface nxopen.features.BlendCornerBuilder
-
Returns the transition curve on blend faces
License requirements: None.
- allowTwistPatches - Variable in class nxopen.uf.UFModl.EdgeBlendMultData
-
- allowUndercut() - Method in interface nxopen.cam.TurnCutParameters
-
Returns the undercut
License requirements: None.
- allowUndercutting() - Method in interface nxopen.cam.MillCutParameters
-
Returns the allow undercutting toggle
License requirements: None.
- AllParametersData() - Constructor for class nxopen.cam.HolderSectionBuilder.AllParametersData
-
- AllPlanesGeometryData() - Constructor for class nxopen.display.DynamicSectionBuilder.AllPlanesGeometryData
-
- AllPointsData() - Constructor for class nxopen.geometricutilities.AlignmentMethodBuilder.AllPointsData
-
- allroundSymbol() - Method in interface nxopen.annotations.LineWeldData
-
Returns the flag indicating whether the allround symbol is displayed
License requirements: None.
- allSameColor() - Method in interface nxopen.geometricutilities.ColorCodedRegionBuilder
-
Returns the option to select all regions of the same color
License requirements: None.
- allSectionList() - Method in interface nxopen.SketchEditDefiningSectionBuilder
-
Returns the section list of all referencing feature
License requirements: solid_modeling ("SOLIDS MODELING")
.
- allsubcase - Variable in class nxopen.cae.optimization.TBSLoadCase.SubcaseData
-
- allsubsteps - Variable in class nxopen.cae.optimization.TBSLoadCase.SubstepData
-
- ALONG - Static variable in class nxopen.tooling.ChannelAdjustBuilder.VectorMethod
-
Reposition the target channels along the vector specified.
- ALONG_AVECTOR - Static variable in class nxopen.features.TrimCurveBuilder.InteresectionDirectionOptions
-
Along a vector
- ALONG_AXIS - Static variable in class nxopen.cam.DmRotaryFloorFinishBuilder.DirectionType
-
along axis
- ALONG_BLADE_DIRECTION - Static variable in class nxopen.cam.BladeEdge.EdgePointType
-
along blade direction
- ALONG_BOTH_DIRECTIONS - Static variable in class nxopen.tooling.CoolingDefineChannelBuilder.ExtensionTypes
-
Extend channel to boundary body along both direction
- ALONG_CENTER_LINE - Static variable in class nxopen.weld.WeldPointLocation
-
To sections are needed for this method.
- ALONG_CURVE - Static variable in class nxopen.features.GeomcopyBuilder.TransformTypes
-
along a path
- ALONG_CURVE - Static variable in class nxopen.geometricanalysis.sectionanalysis.SectionAnalysisBuilder.Types
-
Along Curve
- ALONG_CURVE_ANGLE - Static variable in class nxopen.geometricutilities.ModlMotion.Options
-
Move by AlongCurve-Angle
- ALONG_CUT - Static variable in class nxopen.cam.NcmHoleMachining.OverlapTypes
-
along cut
- ALONG_DATUM_AXIS - Static variable in class nxopen.uf.UFModl.SmholeDirectionType
-
- ALONG_DIRECTION - Static variable in class nxopen.cae.NodeTranslateBuilder.MethodType
-
along direction
- ALONG_DIRECTION - Static variable in class nxopen.features.TrimCurve2Builder.Direction
-
- ALONG_ELEMENT_NORMAL - Static variable in class nxopen.cae.ManualMorphBuilder.MapMethod
-
- ALONG_EXTRUSION_DIRECTION - Static variable in class nxopen.tooling.CoolingDefineChannelBuilder.ExtensionTypes
-
Extend channel to boundary body along the extrusion direction
- ALONG_FACE - Static variable in class nxopen.features.OffsetEdgeBuilder.OffsetEdgeMethod
-
- ALONG_FACE_NORMAL - Static variable in class nxopen.features.ProjectCurveBuilder.DirectionType
-
Represents Along Face Normal
- ALONG_FACE_NORMAL - Static variable in class nxopen.weld.JointmarkBuilder.ProjectionDirectionOptions
-
- ALONG_FIXED_VECTOR - Static variable in class nxopen.uf.UFCurve.Direction
-
- ALONG_GUIDE - Static variable in class nxopen.cam.GuidingCurvesCutDir.Option
-
Cut direction is along the guide curve
- ALONG_GUIDE - Static variable in class nxopen.features.shipdesign.WeldCut2Builder.CreationMethod
-
- ALONG_GUIDE - Static variable in class nxopen.features.shipdesign.WeldCutBuilder.CreationMethod
-
- ALONG_GUIDE_CURVE - Static variable in class nxopen.weld.WeldPointLocation
-
Place spot welds along guide curves
- ALONG_GUIDE_EDGE - Static variable in class nxopen.weld.WeldPointLocation
-
Place spot welds by offsetting from an edge(s).
- ALONG_NORMAL - Static variable in class nxopen.cae.EdgeFaceImprintBuilder.ProjectionDirectionType
-
- ALONG_PART_AXIS - Static variable in class nxopen.cam.BladeEdge.EdgePointType
-
along part axis
- ALONG_PATH - Static variable in class nxopen.geometricutilities.PatternDefinition.PatternEnum
-
pattern along a section path.
- ALONG_PLANAR_CURVE_NORMALS - Static variable in class nxopen.uf.UFCurve.Direction
-
- ALONG_PLANE_OR_FACE - Static variable in class nxopen.features.shipdesign.SplitProfilePlateBuilder.SplitDirectionOptionType
-
Split profile/plate along selected plane or face
- ALONG_PLANEOF_EDGE - Static variable in class nxopen.features.OffsetEdgeBuilder.OffsetEdgeMethod
-
- ALONG_REVERSE_EXTRUSION_DIRECTION - Static variable in class nxopen.tooling.CoolingDefineChannelBuilder.ExtensionTypes
-
Extend channel to boundary body along the reverse extrusion direction
- ALONG_SCREEN_NORMAL - Static variable in class nxopen.features.TrimCurveBuilder.InteresectionDirectionOptions
-
Along screen normal
- ALONG_SPINE - Static variable in class nxopen.features.HelixBuilder.Types
-
Along a spine
- ALONG_SURFACE_CHORD - Static variable in class nxopen.features.shipdesign.StiffenerSystemBuilder.MeasureAlongModes
-
- ALONG_SURFACE_LENGTH - Static variable in class nxopen.features.shipdesign.StiffenerSystemBuilder.MeasureAlongModes
-
- ALONG_TIC - Static variable in class nxopen.annotations.FrameBarElementStyleBuilder.LabelTextOrientation
-
Along Tic
- ALONG_TOOL_AXIS - Static variable in class nxopen.cam.LaserLinearMove.MotionEnds
-
Along Tool Axis
- ALONG_TOOL_AXIS - Static variable in class nxopen.cam.LowerLimit.ActionTypes
-
along tool axis
- ALONG_TOOL_AXIS - Static variable in class nxopen.cam.NcmTransferBuilder.AppDepMethodTypes
-
along tool axis
- ALONG_VECTOR - Static variable in class nxopen.cae.EdgeFaceImprintBuilder.ProjectionDirectionType
-
- ALONG_VECTOR - Static variable in class nxopen.cae.ImprintBuilder.ProjectionDirectionType
-
- ALONG_VECTOR - Static variable in class nxopen.cae.ManualMorphBuilder.MapMethod
-
- ALONG_VECTOR - Static variable in class nxopen.cam.LaserLinearMove.MotionEnds
-
Along Vector
- ALONG_VECTOR - Static variable in class nxopen.cam.NcmPlanarEngRetBuilder.EngRetTypes
-
Vector Dist
- ALONG_VECTOR - Static variable in class nxopen.cam.NcmTransferBuilder.AppDepMethodTypes
-
along vector
- ALONG_VECTOR - Static variable in class nxopen.cam.NormalToToolAxisMoveBuilder.Orientation
-
Along Vector
- ALONG_VECTOR - Static variable in class nxopen.facet.SnipFacetBodyBuilder.DirectionType
-
Snip along specified vector
- ALONG_VECTOR - Static variable in class nxopen.features.HelixBuilder.Types
-
Along a vector
- ALONG_VECTOR - Static variable in class nxopen.features.ProjectCurveBuilder.DirectionType
-
Represents Along Vector
- ALONG_VECTOR - Static variable in class nxopen.features.shipdesign.OrientationRegionItemBuilder.OrientationMethodTypes
-
The web of the profile is aligned along the specified vector.
- ALONG_VECTOR - Static variable in class nxopen.geometricanalysis.DeviationGaugeBuilder.MeasurementMethodType
-
Along vector
- ALONG_VECTOR - Static variable in class nxopen.uf.UFModl.SmholeDirectionType
-
- ALONG_VECTOR - Static variable in class nxopen.weld.WeldProjectionMethod
-
creates a cylinder
- ALONG_WEB - Static variable in class nxopen.features.shipdesign.StiffenerBuilder.MountingMethods
-
Offset stiffener along web direction
- ALONG_WEB - Static variable in class nxopen.features.shipdesign.StiffenerSystemBuilder.MountingMethods
-
Offset stiffener along web direction
- ALONG_X - Static variable in class nxopen.uf.UFCurve.ConstraintType
-
- ALONG_XC - Static variable in class nxopen.features.AssociativeLineBuilder.EndOption
-
Along XC
- ALONG_XC - Static variable in class nxopen.features.AssociativeLineBuilder.StartOption
-
Along XC
- ALONG_XDIRECTION - Static variable in class nxopen.tooling.DieBaseBuilder.AlongDirectionOpt
-
along X direction
- ALONG_Y - Static variable in class nxopen.uf.UFCurve.ConstraintType
-
- ALONG_YC - Static variable in class nxopen.features.AssociativeLineBuilder.EndOption
-
Along YC
- ALONG_YC - Static variable in class nxopen.features.AssociativeLineBuilder.StartOption
-
Along YC
- ALONG_YDIRECTION - Static variable in class nxopen.tooling.DieBaseBuilder.AlongDirectionOpt
-
along Y direction
- ALONG_Z - Static variable in class nxopen.uf.UFCurve.ConstraintType
-
- ALONG_ZC - Static variable in class nxopen.features.AssociativeLineBuilder.EndOption
-
Along ZC
- ALONG_ZC - Static variable in class nxopen.features.AssociativeLineBuilder.StartOption
-
Along ZC
- alongCurve() - Method in interface nxopen.geometricutilities.ModlAlongCurveAngle
-
Returns the value of transform.
- alongCurveAngle() - Method in interface nxopen.geometricutilities.ModlAlongCurveAngle
-
Returns the value of angular transform.
- alongCurveAngle() - Method in interface nxopen.geometricutilities.ModlMotion
-
- alongDirection() - Method in interface nxopen.facet.SnipFacetBodyBuilder
-
Returns the direction in which snipping profiles are projected on the facet bodies
License requirements: None.
- alongDirection() - Method in interface nxopen.tooling.DieBaseBuilder
-
Returns the direction options.
- alongFaceNormal() - Method in interface nxopen.features.sheetmetal.MigratedPanelBuilder
-
Returns
the along face normal flag.
- AlongGuideCut - Interface in nxopen.features.shipdesign
-
Represents a corner cut feature
To create or edit an instance of this class, use
AlongGuideCutBuilder
Created in NX8.5.0
- AlongGuideCutBuilder - Interface in nxopen.features.shipdesign
-
- AlongGuideCutBuilder.CreationMethod - Class in nxopen.features.shipdesign
-
Creation method used to define the placement of the along guide cut
- AlongGuideCutBuilder.WaterStopOffsetMethod - Class in nxopen.features.shipdesign
-
Offset option used to define the placement of the water stop guide cut
- AlongMachineAxisMoveBuilder - Interface in nxopen.cam
-
- AlongMcsAxisMoveBuilder - Interface in nxopen.cam
-
- alongOrientationOption() - Method in interface nxopen.geometricutilities.PatternOrientation
-
Returns the orientationOption for Along pattern type
License requirements: None.
- alongPathAngle() - Method in interface nxopen.features.GeomcopyBuilder
-
Returns the angle dimension used for along path type of instancing.
- alongPathDefinition() - Method in interface nxopen.geometricutilities.PatternDefinition
-
Returns the along path definition.
- AlongPathPattern - Interface in nxopen.geometricutilities
-
the AlongPath pattern definition.
- AlongPathPattern.PathOptions - Class in nxopen.geometricutilities
-
This defines path options
- AlongPathPattern.YDirectionOptions - Class in nxopen.geometricutilities
-
This defines y direction Types
- alongPathRotationAngle() - Method in interface nxopen.geometricutilities.PatternOrientation
-
Returns the along path rotation angle for the Along type pattern Normal to Path option.
- AlongSpineBuilder - Interface in nxopen.geometricutilities
-
- AlongSpineBuilder.RetainSpineOption - Class in nxopen.geometricutilities
-
Represents the Spine option.
- alongSpineData() - Method in interface nxopen.geometricutilities.LawBuilder
-
Returns the linear or cubic along spine law.
- AlongToolAxisMoveBuilder - Interface in nxopen.cam
-
- ALONGX - Static variable in class nxopen.bodydes.OnestepUnformBuilder.DisplaySpringbackMode
-
Onestep display springback mode is along X
- ALONGY - Static variable in class nxopen.bodydes.OnestepUnformBuilder.DisplaySpringbackMode
-
Onestep display springback mode is along Y
- ALONGZ - Static variable in class nxopen.bodydes.OnestepUnformBuilder.DisplaySpringbackMode
-
Onestep display springback mode is along Z
- ALPHA_NUM - Static variable in class nxopen.ExpressionCollection.SortType
-
Alphabetic order, with numbers in numerical order
- ALPHABETIC - Static variable in class nxopen.drawings.ViewCommonViewLabelBuilder.SecondaryIndexingType
-
- ALPHABETIC - Static variable in class nxopen.tooling.HoleManufacturingNoteBuilder.HoleIndexType
-
- ALPHABETIC_COMPONENT - Static variable in class nxopen.assemblies.Order.Type
-
System defined alphabetic component order
- ALPHABETICAL - Static variable in class nxopen.DxfdwgImporter.ProcessingOrderAs
-
Alphabetical
- ALPHANUMERIC_COMPONENT - Static variable in class nxopen.assemblies.Order.Type
-
System defined alphanumeric component order
- alreadyexisted - Variable in class nxopen.assemblies.productinterface.ObjectBuilder.AddProductInterfaceData
-
- ALT_ID_INVALID - Static variable in class nxopen.uf.UFUgmgr.AltIdStatus
-
- ALT_ID_MODIFIED - Static variable in class nxopen.uf.UFUgmgr.AltIdStatus
-
- ALT_ID_OVERRIDE - Static variable in class nxopen.uf.UFUgmgr.AltIdStatus
-
- ALT_ID_VALID - Static variable in class nxopen.uf.UFUgmgr.AltIdStatus
-
- ALTAIR_HYPER_OPT - Static variable in class nxopen.cae.optimization.Solver
-
Altair HyperOpt: Deprecated in NX10
- ALTERNATE - Static variable in class nxopen.cam.CutParametersFinishPassesTypes
-
Alternate
- ALTERNATE - Static variable in class nxopen.cam.RoughFinishTurningBuilder.CutRegionsTypes
-
Cut regions type: Alternate
- ALTERNATE - Static variable in class nxopen.cam.SpringPasses.Types
-
Alternate Spring Passes: Alternate
- ALTERNATE - Static variable in class nxopen.cam.WedmCutParameters.CutDirectionTypes
-
alternating cut direction
- alternateAngle() - Method in interface nxopen.annotations.BaseAngularDimensionBuilder
-
Alternate angle
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING") OR solid_modeling ("SOLIDS MODELING")
.
- alternateAngle() - Method in interface nxopen.drawings.AssociativeAngleBuilder
-
The alternate angle
License requirements: drafting ("DRAFTING")
.
- alternateArrow() - Method in interface nxopen.annotations.CuttingPlaneSymbolBuilder
-
The Cutting Plane Symbol Alternate Arrow
License requirements: None.
- alternateDescription - Variable in class nxopen.pdm.AlternateIdManager.AlternateIdsData
-
the new value for the alternate Description
- AlternateFemRepresentationSource - Interface in nxopen.cae
-
This is the class representing a Alternate Fem Representation Source.
- AlternateFemRepresentationSource.CreateMeshMode - Class in nxopen.cae
-
Create mesh options
- AlternateFemRepresentationSourceBuilder - Interface in nxopen.cae
-
- AlternateIdManager - Interface in nxopen.pdm
-
This class is responsible for setting and getting NX Manager database attribute.
- AlternateIdManager.AlternateIdsData - Class in nxopen.pdm
-
Contains alternate Ids data
- AlternateIdManager.AssignAlternateIdData - Class in nxopen.pdm
-
- AlternateIdManager.AssignAlternateRevData - Class in nxopen.pdm
-
Contains alternate Revision Id data
- AlternateIdsData() - Constructor for class nxopen.pdm.AlternateIdManager.AlternateIdsData
-
- AlternateIdsData(String, String, String, String, boolean) - Constructor for class nxopen.pdm.AlternateIdManager.AlternateIdsData
-
Constructor for the AlternateIdsData object.
- alternateItemId - Variable in class nxopen.pdm.AlternateIdManager.AlternateIdsData
-
the new value for the alternate item ID
- alternateItemId - Variable in class nxopen.pdm.AlternateIdManager.AssignAlternateIdData
-
the newly generated alternate item ID value
that was set on this manager
- alternateMethod() - Method in interface nxopen.features.SectionSurfaceBuilder
-
- alternateMethod() - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder
-
Returns the option to use the system provided alternate method to create transition parting surface.
- alternateName - Variable in class nxopen.pdm.AlternateIdManager.AlternateIdsData
-
the new value for the alternate Name
- alternatePlane() - Method in interface nxopen.display.DynamicSectionBuilder
-
Cycle through planes that are 90 degrees aligned to the current section plane.
- alternateResult() - Method in interface nxopen.tooling.BendOperationBuilder
-
Returns the switch to set if use an alternate result.
- alternateRevId - Variable in class nxopen.pdm.AlternateIdManager.AlternateIdsData
-
the new value for the alternate Revision ID
- alternateRevId - Variable in class nxopen.pdm.AlternateIdManager.AssignAlternateIdData
-
the newly generated alternate revision ID value
that was set on this manager
- alternateRevId - Variable in class nxopen.pdm.AlternateIdManager.AssignAlternateRevData
-
the new value the alternate Revision ID
- alternateSolution() - Method in interface nxopen.DatumConstraint
-
Returns
License requirements: solid_modeling ("SOLIDS MODELING")
.
- alternateSolution() - Method in interface nxopen.features.sheetmetal.BridgeTransitionBuilder
-
- alternateSolution() - Method in interface nxopen.features.sheetmetal.GussetBuilder
-
Cycles the available solutions when a user defined profile intersects the solid body.
- alternateSolution() - Method in interface nxopen.features.StyledSweepBuilder
-
Returns the alternate solution.
- alternateSolution() - Method in interface nxopen.geometricutilities.SpinePlaneBuilder
-
Creates the longer arc between the current and previous plane.
- alternateSolution(int) - Method in interface nxopen.SketchIntersectionCurveBuilder
-
Method to get the alternate solution corresponding to solutionIndex
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- alternateSolutions() - Method in interface nxopen.features.SectionSurfaceBuilderEx
-
Returns the alternate method.
- alternateSolutionType() - Method in interface nxopen.features.DatumAxisBuilder
-
Returns the alternate solution type.
- ALTERNATING - Static variable in class nxopen.cae.DurSpecialistBlockLoadEventBuilder.PatternType
-
between value and -value
- alternativeAngle() - Method in interface nxopen.features.AngularDimBuilder
-
Returns the alternative angle toggle allows you to compute angle that is 360 degree subtracts current angle
License requirements: None.
- alterResult() - Method in interface nxopen.tooling.DirectUnbendBuilder
-
Returns the switch to set if use an alternate result.
- ALTID_AUTOTRANSLATE - Static variable in class nxopen.uf.UFClone.NamingTechnique
-
- altItemId - Variable in class nxopen.uf.UFUgmgr.AssignAlternatePartIdData
-
- altRepPropertyTable() - Method in interface nxopen.cae.FEModelOccAttribute
-
Returns the property table associated with the alternate rep
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- altRevId - Variable in class nxopen.uf.UFUgmgr.AssignAlternatePartIdData
-
- ALUMINUM - Static variable in class nxopen.die.TrimLineDevelopmentBuilder.MaterialTypeName
-
Aluminum
- ALWAYS - Static variable in class nxopen.cae.xyplot.Preference.NewWindowChoice
-
Always show plot graph on a new separate graphic window
- ALWAYS - Static variable in class nxopen.cam.HoleDrillingBuilder.RetractOutputModeType
-
canned retract always
- ALWAYS - Static variable in class nxopen.cam.HoleMakingBuilder.ModelDepthTypes
-
always
- ALWAYS - Static variable in class nxopen.cam.TurnEngageRetractBuilder.DirectEngageRetractModes
-
Direct engage/retract mode: Always
- ALWAYS - Static variable in class nxopen.display.BoundedGridBuilder.ShowLabelType
-
Always show label
- ALWAYS - Static variable in class nxopen.drawings.ViewWorkflowBuilder.Splarcs
-
- ALWAYS - Static variable in class nxopen.mechatronics.DisplayChangerBuilder.ExecuteModes
-
Always execute
- ALWAYS - Static variable in class nxopen.mechatronics.ReadWriteDeviceBuilder.ExecuteMode
-
Always execute
- ALWAYS_CREATE_NEW - Static variable in class nxopen.cam.FeatureProcessBuilder.FeatureGroupingType
-
Always create a new feature group
- ALWAYS_CREATE_NEW_DATA - Static variable in class nxopen.drawings.TrackDrawingChangesGeneralBuilder.SnapshotDataToUseType
-
This option will always create new snapshot data
- ALWAYS_CREATE_NEW_DATA - Static variable in class nxopen.drawings.VisualDrawingComparePrefsBuilder.VisualDrawingComparePrefsOverlayDataToUse
-
This option will always create new data
- ALWAYS_DISPLAY - Static variable in class nxopen.validate.ValidatorOptions.ResultsDisplayModeTypes
-
Always display results.
- ALWAYS_FIRST - Static variable in class nxopen.blockstyler.Tree.NodeInsertOption
-
Node is placed first in the hierarchy in which it is inserted.
- ALWAYS_LAST - Static variable in class nxopen.blockstyler.Tree.NodeInsertOption
-
Node is placed last in the hierarchy in which it is inserted.
- ALWAYS_MAINTAIN_CONNECTIONS - Static variable in class nxopen.mechanicalrouting.MovePathBuilder.DetachTypes
-
- ALWAYS_OVERWRITE_FILE - Static variable in class nxopen.routing.CustomManager.PipingComponentFileOptions
-
Always overwrite any existing piping component file.
- ALWAYS_REPOSITION - Static variable in class nxopen.cae.AssyFEModel.RepositionType
-
always reposition
- ALWAYS_SAVE - Static variable in class nxopen.validate.RequirementCheck.SaveResultsToTeamcenterOptions
-
Always perform save
- ALWAYS_SAVE - Static variable in class nxopen.validate.ValidatorOptions.SaveModeTypes
-
Always perform save
- ALWAYS_SET_DISPLAY_PART - Static variable in class nxopen.shapesearch.ShapeSearchBuilder.OpenPartType
-
Always set the opened part as display part whether it exists in the session
- ALWAYS_USE_EXISTING_DATA - Static variable in class nxopen.drawings.TrackDrawingChangesGeneralBuilder.SnapshotDataToUseType
-
This option will use existing snapshot data
- ALWAYS_USE_EXISTING_DATA - Static variable in class nxopen.drawings.VisualDrawingComparePrefsBuilder.VisualDrawingComparePrefsOverlayDataToUse
-
This option will use existing data to overlay
- alwaysEvaluated() - Method in interface nxopen.motion.SignalChartListItem
-
Returns the always evaluated
License requirements: nx_motion_motor ("NX Motion Motor")
.
- alwaysUpdateDialogs() - Method in interface nxopen.cam.Preferences
-
Returns the auto update dialog
License requirements: None.
- alwaysVertical() - Method in interface nxopen.annotations.DatumData
-
Returns the flag indicating whether the datum is always vertical (without the stub)
License requirements: None.
- amAddPasses() - Method in interface nxopen.cam.AreaMillingNonSteepContainment
-
Returns the Additional Passes
License requirements: None.
- amAddPasses() - Method in interface nxopen.cam.DmAmBuilder
-
Returns the Additional Passes
License requirements: None.
- AMAG - Static variable in class nxopen.motion.GraphBuilder.ComponentChoices
-
Deprecated.
Angular Magnitude
- amAutoPatCenter() - Method in interface nxopen.cam.AreaMillingNonSteepContainment
-
Returns the Area Milling Auto Pattern Center
License requirements: None.
- amAutoPatCenter() - Method in interface nxopen.cam.DmAmBuilder
-
Returns the Area Milling Auto Pattern Center
License requirements: None.
- AMBIENT - Static variable in class nxopen.Light.SceneType
-
Light from all around the model
- AMBIENT - Static variable in class nxopen.LightType
-
An ambient light provides global illumination
for the scene.
- AMBIENT_LIGHT - Static variable in class nxopen.uf.UFView.LightType
-
- ambientFactor - Variable in class nxopen.DisplayManager.J3dMaterial
-
ambient light coeficient
- ambientOcclusion() - Method in interface nxopen.display.Shadows
-
Returns the shadows SSAO ambient occlusion
License requirements: None.
- ambientTempFunction() - Method in interface nxopen.motion.TirePropertyCdBuilder
-
Returns the ambient temperature function
License requirements: None.
- ambientTempProfile() - Method in interface nxopen.motion.TirePropertyCdBuilder
-
Returns the Profile for Ambient Temperature.
- ambientTempTypeSelection() - Method in interface nxopen.motion.TirePropertyCdBuilder
-
Returns the ambient temperature type.Specifies how the ambient temperature will be defined.
- ambientTempValue() - Method in interface nxopen.motion.TirePropertyCdBuilder
-
Returns the ambient temperature constant value.
- amCutPattern() - Method in interface nxopen.cam.DmAmBuilder
-
Returns the Cut Pattern value
License requirements: None.
- amCutRegionStartEnum() - Method in interface nxopen.cam.DmAmBuilder
-
Returns the Cut Region Start Point
License requirements: None.
- amCutTraversal() - Method in interface nxopen.cam.DmAmBuilder
-
Returns the Cut Traversal value
License requirements: None.
- AMEBaseBuilder - Interface in nxopen.ame
-
JA class for the insert Eng object dialog
This is an abstract class, and cannot be instantiated.
- AMEBaseNode - Interface in nxopen.ame
-
Represents Base Node
Use the static method in this class to obtain an instance.
- AMEBaseNode.NodeType - Class in nxopen.ame
-
Define the node type
- AmeDebugSession - Interface in nxopen.ame
-
Represents a class that is used for AME testing.
- AmeDebugSession.NavigatorType - Class in nxopen.ame
-
Represents type of the navigator
- AmeDebugSession.ObjectType - Class in nxopen.ame
-
Represents type of the object
- AmeDebugSessionFactory - Class in nxopen.ame
-
- AmeDebugSessionFactory() - Constructor for class nxopen.ame.AmeDebugSessionFactory
-
- AmeElectricalConnectionPotentialType - Class in nxopen.ame
-
Represents electrical connection Pontential Types
- AMEEngineeringObjectLabel - Interface in nxopen.ame
-
Represents Engineering Object Label Object
This object does not need a creator.
- AMEEngObject - Interface in nxopen.ame
-
Represents Engineering Object
This object does not need a creator.
- AMEExtendedObject - Interface in nxopen.ame
-
Represents Extended Object
Use the static method in this class to obtain an instance.
- AMEGroup - Interface in nxopen.ame
-
Group Journaling class
This object does not need a creator.
- AMEGroupFolder - Interface in nxopen.ame
-
Group Folder Journaling class
This object does not need a creator.
- AmeJunctionRepresentationStyleType - Class in nxopen.ame
-
Representation style for Tee Junction.
- AMEManager - Interface in nxopen.ame
-
Represents a manager of automation designer objects
To obtain an instance of this class, refer to
Session
Created in NX11.0.0
- AMEManager.CreateStationType - Class in nxopen.ame
-
Type of PLC Station
- AMEManager.DeleteType - Class in nxopen.ame
-
the deletion type
- AMEManager.PasteObjectsData - Class in nxopen.ame
-
- AMEManager.PasteStatus - Class in nxopen.ame
-
the status of paste operation
- AMEManagerFactory - Class in nxopen.ame
-
- AMEManagerFactory() - Constructor for class nxopen.ame.AMEManagerFactory
-
- AMENamingRule - Interface in nxopen.ame
-
Represents Naming Rule Object
This object does not need a creator.
- AmeOpticalConnectionFiberType - Class in nxopen.ame
-
Represents optical connection fiber types
- AMEPlcHwItem - Interface in nxopen.ame
-
Represents Plc Hw Item
Use the static method in this class to obtain an instance.
- AMEPort - Interface in nxopen.ame
-
Represents Port
Use the static method in this class to obtain an instance.
- AMEQuery - Interface in nxopen.ame
-
The Query Object
This is an abstract class, and cannot be instantiated.
- AMEQueryGroup - Interface in nxopen.ame
-
The Query Group
This is an abstract class, and cannot be instantiated.
- AMEReportRule - Interface in nxopen.ame
-
Represents Report Rule Object
This object does not need a creator.
- AMESIM - Static variable in class nxopen.motion.MechatronicsBuilder.MechatronicsModelType
-
- AmeTeeJunctionType - Class in nxopen.ame
-
Represents the type of TeeJunction
- AmeTeeJunctionVariant - Class in nxopen.ame
-
Represents Tee Junction variant index
- AMPLITUDE - Static variable in class nxopen.cae.DurabilityEventFatigueSettingsBuilder.FatigueSafetyFactorMethodEnum
-
Amplitude
- AMPLITUDE - Static variable in class nxopen.cae.FemSignalProcessingSignalAttributes.CorrectionModes
-
Amplitude
- AMPLITUDE - Static variable in class nxopen.cae.Result.Complex
-
- AMPLITUDE - Static variable in class nxopen.cae.SignalProcessingPlotData.CorrectionMode
-
Amplitude
- AMPLITUDE - Static variable in class nxopen.cae.SimLoadRecipeFunctionAttributes.CorrectionModes
-
Amplitude
- amplitude() - Method in interface nxopen.drawings.BrokenViewBuilder
-
Returns the break line amplitude
License requirements: None.
- amplitude - Variable in class nxopen.mechatronics.CamProfileBuilder.Element
-
segment polynomial coefficient
- amplitude - Variable in class nxopen.uf.UFMotion.JointMotionInput
-
- AMPLITUDEAND_MEAN - Static variable in class nxopen.cae.DurabilityEventFatigueSettingsBuilder.FatigueSafetyFactorMethodEnum
-
AmplitudeandMean
- amplitudeCorrectionFactor() - Method in interface nxopen.cae.FemSignalProcessingSignalAttributes
-
Returns the amplitude correction factor
License requirements: None.
- amplitudeCorrectionFactor() - Method in interface nxopen.cae.SimLoadRecipeFunctionAttributes
-
Returns the default amplitude correction factor of the functions in the file
License requirements: None.
- amplitudeExpression() - Method in interface nxopen.motion.DriverOperation
-
Returns the amplitude expression
License requirements: None.
- amPocketDir() - Method in interface nxopen.cam.AreaMillingNonSteepContainment
-
Returns the Pocketing Direction value
License requirements: None.
- amPocketDir() - Method in interface nxopen.cam.DmAmBuilder
-
Returns the Pocketing Deriction value
License requirements: None.
- amSteepOption() - Method in interface nxopen.cam.DmAmBuilder
-
Returns the Area Milling Steep Option
License requirements: None.
- AN - Static variable in class nxopen.cae.FEModelOccAttribute.AltRepLengthUnitType
-
Length unit of angstrom
- analFacetAngleTol - Variable in class nxopen.uf.UFDisp.SrfanlData
-
- analFacetChordTol - Variable in class nxopen.uf.UFDisp.SrfanlData
-
- analFacetEdgeTol - Variable in class nxopen.uf.UFDisp.SrfanlData
-
- analFacetWidthTol - Variable in class nxopen.uf.UFDisp.SrfanlData
-
- analyMode() - Method in interface nxopen.tooling.ValidCheckBuilder
-
Returns the analysis mode
License requirements: None.
- ANALYSIS - Static variable in class nxopen.geometricanalysis.SurfaceContinuityAnalysisBuilder.ReportingType
-
- ANALYSIS_GEOMETRY - Static variable in class nxopen.uf.UFDieeng.Opts
-
- ANALYSIS_OBJECT - Static variable in class nxopen.geometricanalysis.DeviationGaugeBuilder.ReportingPerTypes
-
Per Analysis Object
- ANALYSIS_OBJECT - Static variable in class nxopen.geometricanalysis.DraftAnalysisBuilder.SelectOutput
-
analysis object;
- ANALYSIS_OBJECT - Static variable in class nxopen.geometricanalysis.sectionanalysis.SectionAnalysisBuilder.OutputType
-
Analysis Object
- ANALYSIS_OBJECT - Static variable in class nxopen.geometricanalysis.sectionanalysis.SectionAnalysisExBuilder.OutputType
-
Analysis Object
- ANALYSIS_SHADED - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.ViewMode
-
The view is analysis shaded
- AnalysisDisplay() - Constructor for class nxopen.uf.UFCurve.AnalysisDisplay
-
- AnalysisDisplay(double, boolean, boolean, boolean, boolean, boolean, double, int, double, double, boolean, double, int, double[]) - Constructor for class nxopen.uf.UFCurve.AnalysisDisplay
-
- analysisManager() - Method in interface nxopen.BasePart
-
Returns the GeometricAnalysisManager for part .
- AnalysisManager - Interface in nxopen.geometricanalysis
-
Represents the collection of analysis commands.
- analysisMode - Variable in class nxopen.assemblies.ClearanceSet.Summary
-
The analysis mode.
- analysisMode - Variable in class nxopen.uf.UFClear.Summary
-
- AnalysisObject - Interface in nxopen.geometricanalysis
-
Represents an Analysis Object
This is an abstract class, and cannot be instantiated
.
- AnalysisObjectCollection - Interface in nxopen.geometricanalysis
-
Create a AnalysisObjectCollection
To obtain an instance of this class, refer to
AnalysisManager
Created in NX5.0.0
- AnalysisObjectCollectionEx - Interface in nxopen.geometricanalysis
-
Collection of analysis objects
To obtain an instance of this class, refer to
AnalysisObjectCollection
Created in NX11.0.0
- analysisObjects() - Method in interface nxopen.geometricanalysis.AnalysisManager
-
Returns the AnalysisObjectCollection instance belonging to this part .
- analysisObjectsEx() - Method in interface nxopen.geometricanalysis.AnalysisObjectCollection
-
Returns the AnalysisObjectCollectionEx instance belonging to this part .
- analysisPoint() - Method in interface nxopen.geometricanalysis.DupinBuilder
-
Returns the point location defining where the analysis should be done.
- analysisSolution() - Method in interface nxopen.cae.optimization.DAOSolutionBuilder
-
Returns the optimization solution analysis solution
License requirements: None.
- analysisSpacing() - Method in interface nxopen.features.shipdesign.ShipDesignPreferencesBuilder
-
Returns the distance between points on the path used to check twist rate or surface angle.
- analysisType() - Method in interface nxopen.cae.DurSpecialistLocalDefinitionBuilder
-
Returns the analysis type.
- analysisType() - Method in interface nxopen.cae.DurSpecialistSolutionBuilder
-
Returns the analysis type.
- analysisType() - Method in interface nxopen.cae.responsesimulation.RSEventAttributes
-
Returns the analysis type.
- analysisType() - Method in interface nxopen.cae.SimSolution
-
Returns the analysis type
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- analysisType() - Method in interface nxopen.cam.NCAssistantBuilder
-
Returns the Analysis Type
License requirements: None.
- analysisType() - Method in interface nxopen.geometricutilities.CombOptionsBuilder
-
Returns the analysis type
License requirements: None.
- analysisType() - Method in interface nxopen.motion.MotionSolutionBuilder
-
Returns the analysis type
License requirements: None.
- analysisType - Variable in class nxopen.uf.UFSf.AskLanguageData
-
- analysisTypeName - Variable in class nxopen.cae.BaseFemPart.SolverAndAnalysisTypeData
-
the name of the analysis type.
- analysisTypes() - Method in interface nxopen.cae.DurSpecialistManager
-
- AnalyticalContact - Interface in nxopen.motion
-
Represents an Analytical Contact motion object.
- AnalyticalContactBuilder - Interface in nxopen.motion
-
- AnalyticalContactBuilder.ContactTypeOption - Class in nxopen.motion
-
Contact type
- AnalyticalContactBuilder.ProfileType - Class in nxopen.motion
-
Profile Type
- AnalyticalContactCollection - Interface in nxopen.motion
-
Represents a collection of Analytical Contact objects
To obtain an instance of this class, refer to
MotionManager
Created in NX12.0.0
- AnalyticalContactProperty - Interface in nxopen.motion
-
Represents an Analytical Contact Property.
- AnalyticalContactPropertyBuilder - Interface in nxopen.motion
-
- AnalyticalContactPropertyBuilder.DampingType - Class in nxopen.motion
-
Damping Type
- AnalyticalContactPropertyBuilder.FrictionCoefficientType - Class in nxopen.motion
-
Friction Coefficient Type
- AnalyticalContactPropertyBuilder.StiffnessType - Class in nxopen.motion
-
Stiffness Type
- AnalyticalContactPropertyCollection - Interface in nxopen.motion
-
Represents a collection of Analytical Contact Property objects
To obtain an instance of this class, refer to
MotionManager
Created in NX12.0.0
- analyticalContactPropertys() - Method in interface nxopen.motion.MotionManager
-
- analyticalContacts() - Method in interface nxopen.motion.MotionManager
-
- ANALYZE - Static variable in class nxopen.facet.CleanupFacetBodyBuilder.CleanupOptions
-
Perform Analysis
- analyzeAll() - Method in interface nxopen.cam.InspectionAnalyzeBuilder
-
Run Analysis for All Operations
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- analyzeBody() - Method in interface nxopen.tooling.SheetMetalFeatureRecognitionBuilder
-
Analyze selected body
License requirements: None.
- analyzedfaces - Variable in class nxopen.cam.NCAssistantBuilder.ResultsData
-
the faces found during analyze run, it is need SM_free
- analyzeFormability(String) - Method in interface nxopen.tooling.LsdynaKfileGeneratorBuilder
-
Analyzes the formability based on the input K file.
- analyzeGeometry() - Method in interface nxopen.cam.NCAssistantBuilder
-
The action of Analyze Geometry button.
- analyzeMachiningTime() - Method in interface nxopen.cam.SimulationOptionsBuilder
-
Returns the option to activate the machining time analysis
License requirements: None.
- analyzeMoldBody() - Method in interface nxopen.tooling.MoldFeatureRecognitionBuilder
-
Analyze selected body
License requirements: None.
- analyzePart() - Method in interface nxopen.geometricutilities.ConvertFeatureGroupsToDesignGroupsBuilder
-
Analyzes the part for Feature Group to Design Group conversion
License requirements: None.
- AnalyzePocket - Interface in nxopen.features
-
Represents a analyze pocket feature.
- AnalyzePocketBuilder - Interface in nxopen.features
-
- AnalyzePocketBuilder.AngledWallSolutions - Class in nxopen.features
-
Represents the solution which defines how the End Mill is positioned with the angled walls.
- AnalyzePocketBuilder.ToolTypes - Class in nxopen.features
-
Represents the tool type which defines how the angled walls are cut.
- analyzeSelected(CAMObject[]) - Method in interface nxopen.cam.InspectionAnalyzeBuilder
-
Run Analysis for Selected Operations
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- AncestorEvaluatorBuilder - Interface in nxopen.ame
-
- AncestorEvaluatorBuilder.JaAspectEvaluatorBuilderNavCriteria - Class in nxopen.ame
-
Choices for navigation criteria - Could be By Levels or By Property
- AncestorEvaluatorBuilder.JaAspectEvaluatorBuilderNavDirection - Class in nxopen.ame
-
Choices for direction of navigation - Could be from starting object upwards, or from root node downwards
- ancestorNames - Variable in class nxopen.uf.UFKf.AskAncestorClassesData
-
- ANCHOR - Static variable in class nxopen.annotations.AssociativityPointOption
-
Conic Anchor
- anchor() - Method in interface nxopen.annotations.MasterCustomSymbolData
-
- anchor() - Method in interface nxopen.annotations.OriginBuilder
-
Returns the anchor location of the origin on the annotation
License requirements: None.
- anchor() - Method in interface nxopen.annotations.RegionBuilder
-
- anchor() - Method in interface nxopen.geometricutilities.ShapeFrameBuilder
-
Returns the anchor of the frame
License requirements: None.
- Anchor - Interface in nxopen.routing
-
A Routing Anchor defines a position in a Qualified Routing component part.
- ANCHOR - Static variable in class nxopen.Sketch.ConstraintPointType
-
The anchor point of a conic
- ANCHOR - Static variable in class nxopen.uf.UFDisp.PolyMarker
-
- anchor - Variable in class nxopen.uf.UFRoute.AskAppViewDefStockData
-
- ANCHOR - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- ANCHOR_POINT - Static variable in class nxopen.annotations.TextWithSymbolsBuilder.SymbolAlignmentType
-
Anchor Point
- ANCHOR_POINT - Static variable in class nxopen.Sketch.AssocType
-
The anchor of a conic
- ANCHOR_POINT - Static variable in class nxopen.uf.UFSket.AssocType
-
- ANCHOR_VERTEX - Static variable in class nxopen.uf.UFSket.GeomVertex
-
- anchorageLocation() - Method in interface nxopen.features.vehicledesign.SeatBeltAnchorageBuilder
-
Returns the anchorage location type
License requirements: None.
- anchorAttachment() - Method in interface nxopen.geometricutilities.ShapeFrameBuilder
-
Returns the anchor attachment
License requirements: None.
- anchorBaseRadius() - Method in interface nxopen.die.QuickBinderBuilder
-
Returns the base radius for a conical anchor face.
- anchorCenter() - Method in interface nxopen.display.NonProportionalZoom
-
Returns a value indicating if the display will be recentered on the initial line endpoint
License requirements: None.
- AnchorCollection - Interface in nxopen.routing
-
Represents a collection of
Anchor
objects.
- anchorColor() - Method in interface nxopen.cae.xyplot.LeaderStyle
-
Returns the anchor color
License requirements: None.
- AnchorLocation - Class in nxopen.diagramming.tables
-
Represents the table anchor location.
- anchorLocation() - Method in interface nxopen.diagramming.tables.TableSettingsBuilder
-
Returns the anchor location of the table settings.
- anchorLocation() - Method in interface nxopen.geometricutilities.FrameOnPathBuilder
-
Returns the anchor location
License requirements: None.
- anchorLocation() - Method in interface nxopen.geometricutilities.RectangularFrameBuilder
-
Returns the anchor location
License requirements: None.
- anchorLocator() - Method in interface nxopen.geometricutilities.RectangularFrameBuilder
-
Returns the point or coordinate system to define initial location and orientation of the frame
License requirements: None.
- AnchorLocatorBuilder - Interface in nxopen.geometricutilities
-
- anchorObject() - Method in interface nxopen.markup.MarkupObject
-
Returns the anchor object
License requirements: None.
- anchorOrigin() - Method in interface nxopen.geometricanalysis.sectionanalysis.XYZPlaneBuilder
-
Returns the anchor position
License requirements: None.
- anchorPoint() - Method in interface nxopen.annotations.MasterSymbolBuilder
-
Returns the anchor point
License requirements: None.
- anchorpoint - Variable in class nxopen.cae.xyplot.Graph.AnchorPointOfRecordData
-
- anchorPoint() - Method in interface nxopen.diagramminglibraryauthor.Symbol2DBuilder
-
Returns the anchor point
License requirements: None.
- anchorPoint() - Method in interface nxopen.features.GeneralConicBuilder
-
Returns the anchor point.
- AnchorPoint - Interface in nxopen.features.shipdesign
-
- anchorPoint() - Method in interface nxopen.features.shipdesign.PillarBuilder
-
Returns the anchor point.
- anchorPoint() - Method in interface nxopen.features.shipdesign.PillarSystemBuilder
-
Returns the anchor point.
- anchorPoint() - Method in interface nxopen.features.shipdesign.StiffenerStockBuilder
-
Returns the anchor point for profiles only.
- anchorpoint - Variable in class nxopen.layout2d.Component.AnchorPointData
-
- anchorPoint() - Method in interface nxopen.layout2d.DefineComponentAnchorPointBuilder
-
Returns the anchor point of a 2D Component
License requirements: None.
- anchorPoint() - Method in interface nxopen.layout2d.DefineComponentBuilder
-
Returns the anchor point to define the 2D Component
License requirements: None.
- anchorPoint() - Method in interface nxopen.mechatronics.BallJointBuilder
-
Returns the anchor point.
- anchorPoint() - Method in interface nxopen.mechatronics.CylindricalJointBuilder
-
Returns the anchor point.
- anchorPoint() - Method in interface nxopen.mechatronics.VirtualAxisBuilder
-
Returns the anchor point
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- anchorPoint - Variable in class nxopen.uf.UFDraw.ViewInfo
-
- anchorPoint - Variable in class nxopen.uf.UFDrf.CustomSymbol
-
- anchorPoint - Variable in class nxopen.uf.UFDrf.SymbolData
-
- anchorPoint - Variable in class nxopen.uf.UFDrf.UdSymbolFontInfo
-
- AnchorPointData() - Constructor for class nxopen.layout2d.Component.AnchorPointData
-
- AnchorPointList - Interface in nxopen.features.shipdesign
-
Represents a list of objects.
- anchorPointLocation() - Method in interface nxopen.ame.SymbolAnnotationBuilder
-
Returns the symbol anchor point
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- anchorPointLocation() - Method in interface nxopen.ame.SymbolAuthoringBuilder
-
Returns the symbol anchor point
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- AnchorPointOfRecordData() - Constructor for class nxopen.cae.xyplot.Graph.AnchorPointOfRecordData
-
- anchorPointSecond() - Method in interface nxopen.mechatronics.ChainJointBuilder
-
Returns the second anchor point.
- anchorPosition() - Method in interface nxopen.geometricutilities.CurveRangeBuilder
-
Returns the anchor position
License requirements: None.
- anchorPosition() - Method in interface nxopen.geometricutilities.FrameOnPathBuilder
-
Returns the anchor position
License requirements: None.
- anchorPosition() - Method in interface nxopen.geometricutilities.SurfaceRangeBuilder
-
Returns the anchor position
License requirements: None.
- anchorRadius() - Method in interface nxopen.die.QuickBinderBuilder
-
Returns the radius value of a cylidrical anchor face.
- anchorrcp - Variable in class nxopen.formboard.ShapeSegmentBuilder.LineData
-
- anchors() - Method in interface nxopen.routing.RouteManager
-
Anchor collection .
- anchors - Variable in class nxopen.uf.UFRoute.AskStockDataAnchorsData
-
- anchorseg - Variable in class nxopen.formboard.ShapeSegmentBuilder.LineData
-
- anchorsegdir - Variable in class nxopen.routing.EditBendAngleBuilder.SelectedBendData
-
The anchor Segment
- anchorTag - Variable in class nxopen.uf.UFDrf.SymbolCreateData
-
- anchorTag - Variable in class nxopen.uf.UFRoute.LoadStockData
-
- anchorTopRadius() - Method in interface nxopen.die.QuickBinderBuilder
-
Returns the top radius for a conical anchor face.
- AnchorType - Class in nxopen.cae.xyplot
-
Represents the anchor position of a record display, which is used to position a note
- anchorType() - Method in interface nxopen.display.DecalBuilder
-
Returns the anchor type
License requirements: None.
- anchorXAxis() - Method in interface nxopen.geometricanalysis.sectionanalysis.XYZPlaneBuilder
-
Returns the anchor X axis
License requirements: None.
- anchorYAxis() - Method in interface nxopen.geometricanalysis.sectionanalysis.XYZPlaneBuilder
-
Returns the anchor Y axis
License requirements: None.
- ancillaryDisplay() - Method in interface nxopen.cae.IAncillaryDisplayableEntity
-
Calls the ancillary Display for this entity.
- AND - Static variable in class nxopen.ame.EditClauseBuilder.QueryClauseOperatorType
-
- AND - Static variable in class nxopen.mechatronics.GanttLinkerBuilder.LinkerLogicType
-
And
- AND_CONDITION - Static variable in class nxopen.visualreporting.Condition.TypeOption
-
- ANG_ANG_PLANE - Static variable in class nxopen.cam.NcmPlanarEngRetBuilder.EngRetTypes
-
Linear to plane
- ANG_DISPLAY_ZEROS - Static variable in class nxopen.uf.UFDrf.AngularSuppressZeros
-
- ANG_SUPPRESS_ANY_ZEROS - Static variable in class nxopen.uf.UFDrf.AngularSuppressZeros
-
- ANG_SUPPRESS_LEADING_ZEROS - Static variable in class nxopen.uf.UFDrf.AngularSuppressZeros
-
- ANG_SUPPRESS_TRAILING_ZEROS - Static variable in class nxopen.uf.UFDrf.AngularSuppressZeros
-
- angle() - Method in interface nxopen.annotations.Associativity
-
Returns the angle.
- angle() - Method in interface nxopen.annotations.AssociativityBuilder
-
Returns the angle
License requirements: None.
- ANGLE - Static variable in class nxopen.annotations.AssociativityLineOption
-
At angle
- angle() - Method in interface nxopen.annotations.BaseCustomSymbolBuilder
-
Returns the angle
License requirements: None.
- angle() - Method in interface nxopen.annotations.CenterMarkSettingsBuilder
-
- angle() - Method in interface nxopen.annotations.CustomSymbolData
-
- angle() - Method in interface nxopen.annotations.DraftingSurfaceFinishBuilder
-
Returns the angle
License requirements: None.
- angle() - Method in interface nxopen.annotations.ForeshorteningSymbolSettingsBuilder
-
Returns the foreshortening symbol angle
License requirements: None.
- angle() - Method in interface nxopen.annotations.HatchBuilder
-
- angle() - Method in interface nxopen.annotations.HatchFillSettingsBuilder
-
Returns the angle
License requirements: None.
- ANGLE - Static variable in class nxopen.annotations.HoleCalloutSettingsBuilder.Parametertype
-
- angle() - Method in interface nxopen.annotations.LetteringPreferences
-
Returns the angle
License requirements: None.
- angle() - Method in interface nxopen.annotations.LetteringStyleBuilder
-
Returns the angle for general text
License requirements: None.
- angle - Variable in class nxopen.annotations.OrdinateDimension.DoglegPreferences
-
- angle() - Method in interface nxopen.annotations.SurfaceFinishBuilder
-
Returns the angle
License requirements: None.
- angle() - Method in interface nxopen.annotations.TargetPointBuilder
-
Returns the angle
License requirements: None.
- ANGLE - Static variable in class nxopen.cae.connections.SeamWeldMaterialType
-
Seam weld angle material type
- angle() - Method in interface nxopen.cae.DurSpecialistSuperpositionEventBuilder
-
Returns the unit load angle
License requirements: None.
- angle() - Method in interface nxopen.cae.ElementRevolveBuilder
-
Returns the angle
License requirements: None.
- angle() - Method in interface nxopen.cae.ElementRotateBuilder
-
Returns the theta angle for translation in a cylindrical/spherical coordinate system
License requirements: None.
- ANGLE - Static variable in class nxopen.cae.MeshControlBuilder.FilletCircumferenceSizeType
-
- angle() - Method in interface nxopen.cae.NodeRotateBuilder
-
Returns the angle
License requirements: None.
- angle() - Method in interface nxopen.cae.optimization.TBSShapeLinkCondition
-
Returns the angle for repeating segments or demold restrictions
License requirements: None.
- ANGLE - Static variable in class nxopen.cae.Result.Quantity
-
- angle() - Method in interface nxopen.cam.BoundaryTurnMemberCorner
-
Returns the corner angle value
License requirements: None.
- ANGLE - Static variable in class nxopen.cam.CircularAboutAxisMoveBuilder.EndType
-
Angle
- ANGLE - Static variable in class nxopen.cam.CircularAboutAxisMoveBuilder.ExtensionType
-
Angle
- ANGLE - Static variable in class nxopen.cam.DmAmBuilder.SteepOverlapOptTypes
-
Angle Overlap
- angle() - Method in interface nxopen.cam.FormEdgesBuilder
-
Returns the angle value
License requirements: None.
- ANGLE - Static variable in class nxopen.cam.InspectionAlignmentBuilder.RotationMethods
-
Rotate by absolute angle
- angle() - Method in interface nxopen.cam.LaserCutoutDefinition
-
Returns the Angle
License requirements: None.
- ANGLE - Static variable in class nxopen.cam.NcmHoleMachining.OverlapTypes
-
angle
- angle() - Method in interface nxopen.cam.NormalToToolAxisMoveBuilder
-
Returns the angle
License requirements: None.
- angle() - Method in interface nxopen.cam.RotateToolMoveBuilder
-
Returns the Orient Angle
License requirements: None.
- angle() - Method in interface nxopen.cam.SteepContainment
-
Returns the angle
License requirements: None.
- angle - Variable in class nxopen.cam.StepParamsBuilder.Data
-
the angle
- angle() - Method in interface nxopen.cam.ToolAxisTilt
-
Returns the tool axis tilt angle
License requirements: None.
- angle() - Method in interface nxopen.cam.ToolChangeCiBuilder
-
Returns the Tool angle builder
License requirements: None.
- angle - Variable in class nxopen.cam.TrackingBuilder.Data
-
the angle
- angle() - Method in interface nxopen.cam.TrimPoint
-
Returns the trim point angle
License requirements: None.
- ANGLE - Static variable in class nxopen.cam.TrimPoint.AngleOptions
-
Angle is defined by a value.
- ANGLE - Static variable in class nxopen.cam.TrimPoint.RampAngleOptions
-
Ramp angle is defined by a value.
- angle() - Method in interface nxopen.cam.TurnEngageRetractBuilder
-
Returns the Angle
License requirements: None.
- angle() - Method in interface nxopen.cam.TurnThreadEngageRetractBuilder
-
Returns the angle
License requirements: None.
- ANGLE - Static variable in class nxopen.cam.TurnThreadEngageRetractBuilder.EngageRetractTypes
-
Angle
- angle - Variable in class nxopen.cam.UdtSectionBuilder.Data
-
the angle
- ANGLE - Static variable in class nxopen.DatumConstraint.Type
-
- ANGLE - Static variable in class nxopen.die.AddendumSectionBuilder.SegmentParameterType
-
The angle parameter of a straight segment.
- angle() - Method in interface nxopen.die.FlangeSteelRibChildBuilder
-
Returns the angle of the Flange Steel Rib
License requirements: ug_die_design ("Die Design")
.
- angle() - Method in interface nxopen.die.FlangeSteelRibParentBuilder
-
Returns the angle of the Flange Steel Ribs
License requirements: ug_die_design ("Die Design")
.
- angle() - Method in interface nxopen.die.RibChildBuilder
-
Returns the angle of the die rib.
- angle() - Method in interface nxopen.die.RibParentBuilder
-
Returns the angle of die ribs.
- angle() - Method in interface nxopen.drawings.AssociativeAngleBuilder
-
Returns the angle
License requirements: None.
- angle() - Method in interface nxopen.drawings.GeneralViewStyle
-
Returns the value of angle of a member view.
- angle() - Method in interface nxopen.drawings.SectionLineSegmentBuilder
-
Returns the angle.
- ANGLE - Static variable in class nxopen.drawings.SectionLineSegmentBuilder.Types
-
- angle() - Method in interface nxopen.EndCutBlockBuilder
-
Returns the angle
License requirements: None.
- angle() - Method in interface nxopen.features.AdmResizeFaceBuilder
-
Returns the angle to resize, only for cones.
- angle() - Method in interface nxopen.features.ChamferBuilder
-
Returns the chamfer angle (expression).
- ANGLE - Static variable in class nxopen.features.DatumAxisBuilder.ConstraintType
-
Angle constraint
- ANGLE - Static variable in class nxopen.features.DatumPlaneBuilder.ConstraintType
-
Angle constraint
- angle() - Method in interface nxopen.features.EmbossSidewall
-
Returns the sidewall defaults taper angle
License requirements: None.
- angle() - Method in interface nxopen.features.EmbossTaper
-
Returns the emboss taper angle
License requirements: None.
- ANGLE - Static variable in class nxopen.features.FlatteningAndFormingBuilder.DistortionMap
-
Shear distortion of U/V directions
- ANGLE - Static variable in class nxopen.features.FlatteningAndFormingBuilderEx.DistortionMap
-
Shear distortion of U/V directions
- ANGLE - Static variable in class nxopen.features.GlobalShapingBuilder.RotationMethodType
-
Rotation specified by angle
- angle() - Method in interface nxopen.features.MoveFaceBuilder
-
Returns the angle for axis and angle option, don't use it until nx502
License requirements: None.
- angle() - Method in interface nxopen.features.PatternFaceBuilder
-
Returns the angle between circular pattern, don't use it until nx502
License requirements: None.
- angle() - Method in interface nxopen.features.ResizeChamferBuilder
-
Returns the angle
License requirements: None.
- angle() - Method in interface nxopen.features.ResizeFaceBuilder
-
Returns the angle to resize, only for cones. don't use it until nx502
License requirements: None.
- angle() - Method in interface nxopen.features.RibbonBuilder
-
Returns the angle to offset measured from the offset view
License requirements: None.
- angle() - Method in interface nxopen.features.sheetmetal.AdvancedFlangeBuilder
-
Returns the angle
License requirements: None.
- angle() - Method in interface nxopen.features.sheetmetal.AeroFlangeBuilder
-
Returns the angle expression.
- ANGLE - Static variable in class nxopen.features.sheetmetal.AeroFlangeBuilder.CompType
-
Angle
- angle() - Method in interface nxopen.features.sheetmetal.AeroLighteningCutoutBuilder
-
Returns the angle
License requirements: None.
- angle() - Method in interface nxopen.features.sheetmetal.BeadBuilder
-
Returns the angle of the bead.
- ANGLE - Static variable in class nxopen.features.sheetmetal.BendTaperBuilder.BendTaperInputMethod
-
Angle
- angle() - Method in interface nxopen.features.sheetmetal.FlangeBendPropertiesBuilder
-
Returns the angle
License requirements: None.
- angle() - Method in interface nxopen.features.sheetmetal.LighteningCutoutBuilder
-
Returns the angle
License requirements: None.
- angle() - Method in interface nxopen.features.sheetmetal.ResizeBendAngleBuilder
-
Returns the bend angle
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- ANGLE - Static variable in class nxopen.features.shipdesign.OrientationAngleMethodsBuilder.MethodTypes
-
Angle is defined by specifying a constant angle from a reference object.
- ANGLE - Static variable in class nxopen.features.shipdesign.PlateChamferBuilder.AngleMethod
-
Use the angle for the chamfer parameters
- angle() - Method in interface nxopen.features.shipdesign.RollingLineBuilder
-
Returns the angle for either the max amount of rotation at a point for manual type.
- angle() - Method in interface nxopen.features.shipdesign.StiffenerBySupportPathBuilder
-
Returns the angle of horizontal or vertical method, in degrees
License requirements: None.
- angle() - Method in interface nxopen.features.vehicledesign.PendulumPlacementBuilder
-
Returns the rotation angle of this pendulum.
- ANGLE - Static variable in class nxopen.FlatteningBuilder.DistortionMapType
-
Deprecated.
angle distortion map
- ANGLE - Static variable in class nxopen.formboard.OrientBranchBuilder.BranchAngleMethod
-
method to rotate branch by angle
- angle - Variable in class nxopen.formboard.ShapeSegmentBuilder.LineData
-
- angle() - Method in interface nxopen.geometricanalysis.DupinBuilder
-
Returns the deviation in degrees from the minimum curvature.
- ANGLE - Static variable in class nxopen.geometricutilities.AlignmentMethodBuilder.Type
-
- ANGLE - Static variable in class nxopen.geometricutilities.AngularPatternSpacing.UsePitchOptions
-
angle is pitch value
- angle() - Method in interface nxopen.geometricutilities.ModlDistanceAngle
-
Returns the value of angular transform.
- angle() - Method in interface nxopen.geometricutilities.ModlMotion
-
- ANGLE - Static variable in class nxopen.geometricutilities.ModlMotion.Options
-
Move by Angle
- angle() - Method in interface nxopen.layout2d.InsertComponentBuilder
-
Returns the component rotation angle, measured counterclockwise, around the anchor point, from the sketch +X direction to component's X axis
License requirements: None.
- ANGLE - Static variable in class nxopen.mechanicalrouting.EditPointBuilder.Editsegmenttype
-
Edit angle type in Edit Segment Motion
- angle() - Method in interface nxopen.mechatronics.DistanceSensorBuilder
-
Returns the open angle.
- ANGLE - Static variable in class nxopen.motion.PackagingMeasureBuilder.MeasureType
-
Measure angle between lines or linear edges.
- angle() - Method in interface nxopen.motion.SegmentBuilder
-
Returns the angle of a constant radius segment
License requirements: mechanisms ("MECHANISMS")
.
- ANGLE - Static variable in class nxopen.PlaneTypes.MethodType
-
Angle method
- ANGLE - Static variable in class nxopen.positioning.Constraint.Type
-
Two geometries have a specified angle between them
- angle - Variable in class nxopen.routing.EditBendAngleBuilder.SelectedBendData
-
Teh angle between the two segments
- ANGLE - Static variable in class nxopen.Scalar.DimensionalityType
-
- angle() - Method in interface nxopen.SketchChamferBuilder
-
Returns the angle for Offset and Angle Chamfer
License requirements: drafting ("DRAFTING") OR solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- ANGLE - Static variable in class nxopen.tooling.CoolingDefineChannelBuilder.TipEndTypes
-
Angle tip
- ANGLE - Static variable in class nxopen.tooling.CoolingExtendBuilder.TipEndTypes
-
Angle tip
- angle() - Method in interface nxopen.tooling.ElectrodeBlankBuilder
-
Returns the angle of the joint object.
- angle() - Method in interface nxopen.tooling.ReusePositioningObjectBuilder
-
Returns the angle value of pattern
License requirements: None.
- angle() - Method in interface nxopen.tooling.UndersizeBuilder
-
Returns the angle which is between two distribution electrodes
License requirements: None.
- ANGLE - Static variable in class nxopen.uf.UFCurve.ConstraintType
-
- angle - Variable in class nxopen.uf.UFCurve.Proj
-
- angle - Variable in class nxopen.uf.UFDrf.Areafill
-
- angle - Variable in class nxopen.uf.UFDrf.CustomSymbol
-
- angle - Variable in class nxopen.uf.UFDrf.DraftAidTextInfo
-
- angle - Variable in class nxopen.uf.UFDrf.LetteringPreferences
-
- angle - Variable in class nxopen.uf.UFDrf.SymbolCreateData
-
- angle - Variable in class nxopen.uf.UFDrf.SymbolData
-
- angle - Variable in class nxopen.uf.UFDrf.WeldSymInfo
-
- angle - Variable in class nxopen.uf.UFGdt.AskTargetAreaXhatchData
-
- angle - Variable in class nxopen.uf.UFModl.AskDovetailSlotParmsData
-
- angle - Variable in class nxopen.uf.UFModl.FlangeData
-
- angle - Variable in class nxopen.uf.UFModl.SmbendData
-
- angle - Variable in class nxopen.uf.UFModl.SymbThreadData
-
- angle - Variable in class nxopen.uf.UFModlFeatures.AskCircularPatternFaceData
-
- angle - Variable in class nxopen.uf.UFModlFeatures.AskDatumPlaneParmsData
-
- angle - Variable in class nxopen.uf.UFModlGeneral.AskCircularIsetParmsData
-
- angle - Variable in class nxopen.uf.UFSmd.AskBendLineData
-
- angle - Variable in class nxopen.weld.JointExitBuilder.EdgePrepValuesData
-
The angle of edge preporation for this position.
- angle() - Method in interface nxopen.weld.JointmarkPointsBuilder
-
Returns the angle through which X and Y axis to rotate
License requirements: ugweld ("UG WELD")
.
- ANGLE - Static variable in class nxopen.weld.WeldJointBuilder.SplitTypes
-
At specifed angle.
- angle01() - Method in interface nxopen.tooling.PrebendBuilder
-
Returns the first prebend angle
License requirements: None.
- angle02() - Method in interface nxopen.tooling.PrebendBuilder
-
Returns the second prebend angle
License requirements: None.
- angle03() - Method in interface nxopen.tooling.PrebendBuilder
-
Returns the third prebend angle
License requirements: None.
- angle04() - Method in interface nxopen.tooling.PrebendBuilder
-
Returns the fourth prebend angle
License requirements: None.
- angle05() - Method in interface nxopen.tooling.PrebendBuilder
-
Returns the fifth prebend angle
License requirements: None.
- angle1() - Method in interface nxopen.cam.ProbeInspectBorebossMoveBuilder
-
Returns the 1st custom angle to probe at
License requirements: None.
- angle1() - Method in interface nxopen.tooling.DirectUnfoldBuilder
-
Returns the first angle of prebend.
- angle2() - Method in interface nxopen.cam.ProbeInspectBorebossMoveBuilder
-
Returns the 2nd custom angle to probe at
License requirements: None.
- angle2() - Method in interface nxopen.tooling.DirectUnfoldBuilder
-
Returns the second angle of prebend.
- angle3() - Method in interface nxopen.cam.ProbeInspectBorebossMoveBuilder
-
Returns the 3rd custom angle to probe at
License requirements: None.
- angle3() - Method in interface nxopen.tooling.DirectUnfoldBuilder
-
Returns the third angle of prebend.
- ANGLE30 - Static variable in class nxopen.cae.PreTestExciterConfigBuilder.OffAxisAngleChoiceType
-
- ANGLE3D - Static variable in class nxopen.MeasureAngleBuilder.ProjectionType
-
- angle4() - Method in interface nxopen.tooling.DirectUnfoldBuilder
-
Returns the fourth angle of prebend.
- ANGLE45 - Static variable in class nxopen.cae.PreTestExciterConfigBuilder.OffAxisAngleChoiceType
-
- angle5() - Method in interface nxopen.tooling.DirectUnfoldBuilder
-
Returns the fifth angle of prebend.
- angle6() - Method in interface nxopen.tooling.DirectUnfoldBuilder
-
Returns the sixth angle of prebend.
- ANGLE_AND_DISTANCE - Static variable in class nxopen.cam.TurnEngageRetractBuilder.Types
-
Angle and Distance
- ANGLE_AXIS - Static variable in class nxopen.cae.xyplot.ModelType
-
the axis to display angle divisions on circle grids
- ANGLE_AXIS_NUMBER - Static variable in class nxopen.cae.xyplot.ModelType
-
the angle axis number
- ANGLE_AXIS_NUMBER - Static variable in class nxopen.cae.xyplot.TextType
-
Angle Axis name number
- ANGLE_BEND - Static variable in class nxopen.uf.UFSmd.AngleTypeE
-
- ANGLE_BETWEEN - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.TolType
-
Angle Between
- ANGLE_DIM - Static variable in class nxopen.uf.UFModl.DfoConstraintType
-
- ANGLE_HELIX_PITCH_AND_SPAN - Static variable in class nxopen.geometricutilities.HelixPattern.SizeOptions
-
use Angle, Helix Pitch, Span to define a Helix
- ANGLE_HELIX_PITCH_AND_TURNS - Static variable in class nxopen.geometricutilities.HelixPattern.SizeOptions
-
use Angle, Helix Pitch, Turns to define a Helix
- ANGLE_INCLUDED - Static variable in class nxopen.uf.UFSmd.AngleTypeE
-
- ANGLE_INVALID_OPTION - Static variable in class nxopen.uf.UFSmd.AngleTypeE
-
- ANGLE_MEASUREMENT - Static variable in class nxopen.uf.UFMotion.MeasurementType
-
- ANGLE_NUM_ITEMS - Static variable in class nxopen.uf.UFSmd.AngleTypeE
-
- ANGLE_SIZE - Static variable in class nxopen.annotations.ChamferForm
-
45 x 5
- ANGLE_TO_DRIVE - Static variable in class nxopen.cam.ToolAxisInterpolate.InterpolateTypes
-
Interpolate Types: Angle to Drive
- ANGLE_TO_PART - Static variable in class nxopen.cam.ToolAxisInterpolate.InterpolateTypes
-
Interpolate Types: Angle to Part
- ANGLE_TO_VECTOR - Static variable in class nxopen.features.ProjectCurveBuilder.DirectionType
-
Represents Angle To Vector
- ANGLE_XY - Static variable in class nxopen.MeasureAngleBuilder.ProjectionType
-
- angleA() - Method in interface nxopen.cam.InspectionCreatePathsBuilder
-
Returns the A angle
License requirements: None.
- angleA() - Method in interface nxopen.cam.InspectionLinkPmiBuilder
-
Returns the A angle
License requirements: None.
- angleA() - Method in interface nxopen.cam.InspectionMoveBuilder
-
Returns the A angle for an indexable head
License requirements: None.
- anglea - Variable in class nxopen.cam.InspectionPathPointBuilder.PointData
-
the A angle
- angleA() - Method in interface nxopen.cam.InspectionSensorBuilder
-
Returns the sensor tip location tilt angle component
License requirements: None.
- angleA() - Method in interface nxopen.cam.InspectionSensorMassEditBuilder
-
Returns the angle a
License requirements: None.
- angleAbout() - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder
-
Returns the angle about
License requirements: die_engineering ("DIE ENGINEERING")
.
- AngleAlignmentPointsData() - Constructor for class nxopen.features.MeshSurfaceBuilder.AngleAlignmentPointsData
-
- AngleAxisStyleSetting - Interface in nxopen.cae.xyplot
-
Represents the angle axis display style.
- angleB() - Method in interface nxopen.cam.InspectionCreatePathsBuilder
-
Returns the B angle
License requirements: None.
- angleB() - Method in interface nxopen.cam.InspectionLinkPmiBuilder
-
Returns the B angle
License requirements: None.
- angleB() - Method in interface nxopen.cam.InspectionMoveBuilder
-
Returns the B angle for an indexable head
License requirements: None.
- angleb - Variable in class nxopen.cam.InspectionPathPointBuilder.PointData
-
the B angle
- angleB() - Method in interface nxopen.cam.InspectionSensorBuilder
-
Returns the sensor tip location rotation angle component
License requirements: None.
- angleB() - Method in interface nxopen.cam.InspectionSensorMassEditBuilder
-
Returns the angle b
License requirements: None.
- angleBetween(double[], double[], double[]) - Method in interface nxopen.uf.UFVec3
-
- angleCalculation() - Method in interface nxopen.motion.BushingDefine
-
Returns the angle calculation option
License requirements: mechanisms ("MECHANISMS")
.
- ANGLED - Static variable in class nxopen.formboard.FormboardLayoutBuilder.BranchShape
-
Branch becomes angled at each location
that forms a new branch.
- angleDecimalPointCharacter() - Method in interface nxopen.drawings.ViewStyleGeneralBuilder
-
Returns the decimal point character to use for view angle display.
- angleDecimalPointFormat() - Method in interface nxopen.drawings.GeneralViewStyle
-
Returns the decimal point character to use for view angle display.
- angleDecimalPointFormat() - Method in interface nxopen.preferences.GeneralViewPreferences
-
Returns the decimal point character to use for view angle display.
- angleDiePlateTwo() - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder
-
Returns the angle of the die plate two
License requirements: None.
- angleDivisions() - Method in interface nxopen.features.shipdesign.RollingLineBuilder
-
Returns the number of divisions for dividing the angle when using a manual type.
- angledWallSolution() - Method in interface nxopen.features.BlendPocketBuilder
-
Returns the angled wall solution defines how the End Mill is positioned with angled walls.
- angleEndPoint() - Method in interface nxopen.cam.InspectionOperationTransformBuilder
-
Returns the angle end point
License requirements: None.
- angleEndPoint() - Method in interface nxopen.cam.InspectionPolarGridBuilder
-
Returns the angle end point
License requirements: None.
- angleEndPoint() - Method in interface nxopen.cam.OperationTransformBuilder
-
Returns the angle end point
License requirements: None.
- angleEnum() - Method in interface nxopen.cae.CorrelFineTuneAlignmentBuilder
-
Returns the angle vector enumeration
License requirements: None.
- angleExp() - Method in interface nxopen.features.ChamferBuilder
-
Returns the angle expression object of chamfer.
- angleExpression() - Method in interface nxopen.cae.LaminatePly
-
Returns the ply angle expression, relative to local material orientation
License requirements: None.
- angleExpression() - Method in interface nxopen.tooling.RunSimulationBuilder
-
Returns the angle of the cycle position
License requirements: None.
- angleFlag - Variable in class nxopen.uf.UFPath.Rotate
-
- angleFormat() - Method in interface nxopen.drawings.GeneralViewStyle
-
Returns the format to use for view angle display.
- angleFormat() - Method in interface nxopen.drawings.ViewStyleGeneralBuilder
-
Returns the format to use for view angle display.
- AngleFormat - Class in nxopen.preferences
-
Specifies the view angle display format
- angleFormat() - Method in interface nxopen.preferences.GeneralViewPreferences
-
Returns the format to use for view angle display.
- ANGLEFROM_REFERENCE_VECTOR - Static variable in class nxopen.formboard.OrientBranchBuilder.BranchAngleMethod
-
method to rotate branch with respect to selected vectors
- angleIncrement() - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder
-
Returns the angle increment
License requirements: die_engineering ("DIE ENGINEERING")
.
- angleLaw() - Method in interface nxopen.features.LawExtensionBuilder
-
Returns the angle law
License requirements: solid_modeling ("SOLIDS MODELING") OR free_form_modeling ("FREE-FORM MODELING")
.
- angleLaw() - Method in interface nxopen.features.LawExtensionBuilderEx
-
Returns the angle law
License requirements: None.
- angleLaw() - Method in interface nxopen.features.SectionSurfaceBuilder
-
- angleLaw() - Method in interface nxopen.features.SectionSurfaceBuilderEx
-
Returns the angle law.
- angleLaw() - Method in interface nxopen.features.SilhouetteFlangeBuilder
-
Returns the angle law.
- angleMethod() - Method in interface nxopen.cam.InspectionOperationTransformBuilder
-
Returns the angle method
License requirements: None.
- angleMethod() - Method in interface nxopen.cam.OperationTransformBuilder
-
Returns the angle method
License requirements: None.
- angleMethod() - Method in interface nxopen.features.shipdesign.OrientationAngleMethodsBuilder
-
Returns the method used to calculate the angle.
- angleMethods() - Method in interface nxopen.features.shipdesign.OrientationRegionItemBuilder
-
Returns the angle definition for the region's orientation.
- angleMode() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns the polar angle mode
License requirements: None.
- angleMode() - Method in interface nxopen.cam.InspectionPolarGridBuilder
-
Returns the angle mode
License requirements: None.
- angleNoseIgnorableSize() - Method in interface nxopen.tooling.FaceColorManagementBuilder
-
Returns the angle nose ignorable size
License requirements: None.
- angleOffset() - Method in interface nxopen.cam.TrimPoint
-
Returns the trim point angle offset
License requirements: None.
- angleOfRotation() - Method in interface nxopen.features.shipdesign.ProfileBuilder
-
Returns the angle of rotation
License requirements: None.
- angleOption() - Method in interface nxopen.cae.ElementRevolveBuilder
-
Returns the angle option
License requirements: None.
- angleOption() - Method in interface nxopen.cam.TrimPoint
-
Returns the trim point angle option
License requirements: None.
- angleOption() - Method in interface nxopen.features.shipdesign.PlateChamferBuilder
-
Returns the angle option
License requirements: None.
- anglePitch() - Method in interface nxopen.geometricutilities.HelixPattern
-
Returns the angle pitch expression for the Helix type pattern
License requirements: None.
- anglePivotPoint() - Method in interface nxopen.cam.InspectionOperationTransformBuilder
-
Returns the angle pivot point
License requirements: None.
- anglePivotPoint() - Method in interface nxopen.cam.OperationTransformBuilder
-
Returns the angle pivot point
License requirements: None.
- anglePrecision() - Method in interface nxopen.drawings.GeneralViewStyle
-
Returns the precision to use for view angle display.
- anglePrecision() - Method in interface nxopen.drawings.ViewStyleGeneralBuilder
-
Returns the precision to use for view angle display.
- anglePrecision() - Method in interface nxopen.preferences.GeneralViewPreferences
-
Returns the precision to use for view angle display.
- angleReference() - Method in interface nxopen.features.shipdesign.OrientationAngleMethodsBuilder
-
Returns the object used to measure the angle from.
- angleResult() - Method in interface nxopen.tooling.BlankNestingBuilder
-
Returns the angle between processed blank and original blank.
- angleRule() - Method in interface nxopen.features.shipdesign.ShipDesignPreferencesBuilder
-
Returns the indication of how angles are to be measured.
- ANGLES - Static variable in class nxopen.drawings.View2dOrientBuilder.CustomMethod
-
axis rotations
- angles - Variable in class nxopen.routing.RouteSweptTwistBuilder.AskExistingTwistData
-
Number of angles
- angleSetting() - Method in interface nxopen.drawings.ViewStyleGeneralBuilder
-
Returns the angle value on the GENERAL tab of the View Style Dialog
License requirements: None.
- angleShowLeadingZeros() - Method in interface nxopen.drawings.ViewStyleGeneralBuilder
-
Returns the status of leading zeros display in view angle.
- angleShowTrailingZeros() - Method in interface nxopen.drawings.ViewStyleGeneralBuilder
-
Returns the status of trailing zeros display in view angle.
- angleStartPoint() - Method in interface nxopen.cam.InspectionOperationTransformBuilder
-
Returns the angle start point
License requirements: None.
- angleStartPoint() - Method in interface nxopen.cam.InspectionPolarGridBuilder
-
Returns the angle start point
License requirements: None.
- angleStartPoint() - Method in interface nxopen.cam.OperationTransformBuilder
-
Returns the angle start point
License requirements: None.
- angleStep() - Method in interface nxopen.tooling.BlankNestingBuilder
-
Returns the angle increment to use when rotating the blank during the processing to find the best layout.
- angleStr - Variable in class nxopen.uf.UFModlFeatures.AskTaperFromEdges1Data
-
- angleStr - Variable in class nxopen.uf.UFModlFeatures.AskTaperFromEdgesData
-
- angleStr - Variable in class nxopen.uf.UFSubdiv.Isocline
-
- angleString() - Method in interface nxopen.cam.InspectionCreatePathsBuilder
-
- angleString() - Method in interface nxopen.cam.InspectionLinkPmiBuilder
-
Returns the angle specification string
License requirements: None.
- angleThreshold() - Method in interface nxopen.facet.DecimateFacetBodyBuilder
-
Returns the value indicating maximum angle, where any facets with a larger relative angle are not reduced.
- angleThreshold() - Method in interface nxopen.facet.SubdivideFacetBodyBuilder
-
Returns the angular tolerance to detect sharp edges to be kept.
- angleThreshold() - Method in interface nxopen.features.OptimizeCurveBuilder
-
Returns the angle threshold
License requirements: None.
- angleToggle() - Method in interface nxopen.cam.ToolChangeCiBuilder
-
Returns the Tool angle toggle
License requirements: None.
- angleTol() - Method in interface nxopen.features.SphericalCornerBuilder
-
Returns the Angular Tolerance
License requirements: None.
- angleTol - Variable in class nxopen.uf.UFCurve.WrapData
-
- angleTol - Variable in class nxopen.uf.UFModl.StycornerData
-
- angleTol - Variable in class nxopen.uf.UFModlFeatures.AskTaperFromEdgesData
-
- angleTol - Variable in class nxopen.uf.UFSmd.FpPrefs
-
- angletolerance - Variable in class nxopen.ApparentChainingRule.Data
-
Angle tolerance
- angleTolerance() - Method in interface nxopen.cam.InspectionOperationTransformBuilder
-
Returns the tolerance used for checking angles of transformed geometry
License requirements: None.
- angleTolerance() - Method in interface nxopen.cam.NCAssistantBuilder
-
Returns the Angle Tolerance
License requirements: None.
- angleTolerance() - Method in interface nxopen.cam.SurfaceRegions
-
Returns the angle tolerance
License requirements: None.
- angleTolerance() - Method in interface nxopen.cam.Topology
-
Returns the angle tolerance
License requirements: None.
- angleTolerance - Variable in class nxopen.CurveFeatureTangentRule.Data
-
Angle tolerance for tangent curves
- angleTolerance - Variable in class nxopen.CurveTangentRule.Data
-
Angle tolerance for tangent curves
- angleTolerance() - Method in interface nxopen.die.AddendumSectionBuilder
-
Returns the angle tolerance.
- angleTolerance() - Method in interface nxopen.die.CastReliefBuilder
-
Returns the angle tolerance
License requirements: None.
- angleTolerance() - Method in interface nxopen.die.ClampingSlotBuilder
-
Returns the angle tolerance
License requirements: None.
- angleTolerance() - Method in interface nxopen.die.ClearanceBuilder
-
Returns the angle tolerance.
- angleTolerance() - Method in interface nxopen.die.CompensateRoughDataBuilder
-
Returns the angle tolerance.
- angleTolerance() - Method in interface nxopen.die.DieShoeBuilder
-
Returns the angle tolerance
License requirements: None.
- angleTolerance() - Method in interface nxopen.die.DrawBeadBuilder
-
Returns the angle tolerance.
- angleTolerance() - Method in interface nxopen.die.DrawDiePunchBuilder
-
Returns the angle tolerance of the draw die punch casting.
- angleTolerance() - Method in interface nxopen.die.FillAreaBuilder
-
Returns the angle tolerance.
- angleTolerance() - Method in interface nxopen.die.FillBuilder
-
Returns the angle tolerance of the area fill
License requirements: die_engineering ("DIE ENGINEERING")
.
- angleTolerance() - Method in interface nxopen.die.FingerClearanceNotchBuilder
-
Returns the angle tolerance.
- angleTolerance() - Method in interface nxopen.die.FlangeTaskBuilder
-
Returns the angle tolerance of the flange task
License requirements: die_engineering ("DIE ENGINEERING")
.
- angleTolerance() - Method in interface nxopen.die.FormTaskBuilder
-
Returns the angle tolerance of the form task.
- angleTolerance() - Method in interface nxopen.die.HandlingCoreBuilder
-
Returns the angle tolerance.
- angleTolerance() - Method in interface nxopen.die.HeelpostBuilder
-
Returns the angle tolerance
License requirements: None.
- angleTolerance() - Method in interface nxopen.die.KeywayBuilder
-
Returns the angle tolerance
License requirements: None.
- angleTolerance() - Method in interface nxopen.die.MachineReliefBuilder
-
Returns the angle tolerance.
- angleTolerance() - Method in interface nxopen.die.OutputCurvesBuilder
-
Returns the angle tolerance.
- angleTolerance() - Method in interface nxopen.die.PierceTaskBuilder
-
Returns the angle tolerance of the pierce task
License requirements: die_engineering ("DIE ENGINEERING")
.
- angleTolerance() - Method in interface nxopen.die.RotorBuilder
-
Returns the angle tolerance of the rotor casting.
- angleTolerance() - Method in interface nxopen.die.SpringbackCompensationBuilder
-
Returns the angle tolerance.
- angleTolerance() - Method in interface nxopen.die.SteelInsertBuilder
-
Returns the angle tolerance of the diesteelinsert
License requirements: ug_die_design ("Die Design")
.
- angleTolerance() - Method in interface nxopen.die.TrimTaskBuilder
-
Returns the angle tolerance of the trim task
License requirements: die_engineering ("DIE ENGINEERING")
.
- angleTolerance() - Method in interface nxopen.drawings.ViewStyleShadingBuilder
-
Returns the angle tolerance data on the SHADING tab of the View Style Dialog
License requirements: None.
- angleTolerance - Variable in class nxopen.EdgeMultipleSeedTangentRule.Data
-
Angle tolerance for tangent edges
- angleTolerance - Variable in class nxopen.EdgeTangentRule.Data
-
Angle tolerance for tangent edges
- angleTolerance - Variable in class nxopen.EdgeVertexTangentRule.Data
-
Angle tolerance for tangent edges
- angleTolerance() - Method in interface nxopen.facet.MergeFacetBodyBuilder
-
Returns the angle tolerance used in the merge facet body feature
License requirements: None.
- angleTolerance - Variable in class nxopen.FaceTangentRule.Data
-
Angle tolerance for tangent faces
- angleTolerance() - Method in interface nxopen.features.BlendCornerBuilder
-
Returns the angle tolerance.
- angleTolerance() - Method in interface nxopen.features.ConcaveFacesBuilder
-
Returns the angle tolerance.
- angleTolerance() - Method in interface nxopen.features.CurveOnSurfaceBuilder
-
Returns the angle tolerance
License requirements: solid_modeling ("SOLIDS MODELING")
.
- angleTolerance() - Method in interface nxopen.features.DraftBuilder
-
Returns the angle tolerance in [rad/deg]
License requirements: solid_modeling ("SOLIDS MODELING")
.
- angleTolerance() - Method in interface nxopen.features.ExtractFaceBuilder
-
Returns the angle Tolerance
License requirements: None.
- angleTolerance() - Method in interface nxopen.features.GlobalShapingBuilder
-
Returns the angle tolerance
License requirements: None.
- angleTolerance() - Method in interface nxopen.features.GuidedExtensionBuilderEx
-
Returns the angle tolerance for use in creating the guided extension surfaces
License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_2 ("advanced freeform modeling") OR ug_mold_design ("UG MOLD") OR die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- angleTolerance() - Method in interface nxopen.features.HelixBuilder
-
Returns the angle tolerance
License requirements: None.
- angleTolerance() - Method in interface nxopen.features.JoinCurvesBuilder
-
Returns the angle tolerance.
- angleTolerance() - Method in interface nxopen.features.LawExtensionBuilder
-
Returns the angle tolerance
License requirements: solid_modeling ("SOLIDS MODELING") OR free_form_modeling ("FREE-FORM MODELING")
.
- angleTolerance() - Method in interface nxopen.features.LawExtensionBuilderEx
-
Returns the angle tolerance
License requirements: None.
- angleTolerance() - Method in interface nxopen.features.OffsetEmbossBuilder
-
Returns the angle tolerance:
The maximum allowable angle between the true theoretical sheet and the body created to approximate it.
- angleTolerance() - Method in interface nxopen.features.PointSetBuilder
-
Returns the angle tolerance.
- angleTolerance() - Method in interface nxopen.features.RibbonBuilder
-
Returns the angle tolerance
License requirements: None.
- angleTolerance() - Method in interface nxopen.features.shipdesign.FeatureParmsBuilder
-
Returns the tolerance, in degrees, used to determine when angles are zero.
- angleTolerance() - Method in interface nxopen.features.shipdesign.MarkingLineBuilder
-
Returns the angle tolerance for marking lines.
- angleTolerance() - Method in interface nxopen.features.shipdesign.MarkingLineDesignBuilder
-
Returns the angle tolerance for marking lines.
- angleTolerance() - Method in interface nxopen.features.shipdesign.OrientationDefinitionBuilder
-
Returns the angle tolerance used in the orientation objects to determine if vectors are parallel.
- angleTolerance() - Method in interface nxopen.features.shipdesign.PillarBuilder
-
Returns the angle tolerance.
- angleTolerance() - Method in interface nxopen.features.shipdesign.RollingLineBuilder
-
Returns the modeling angle tolerance.
- angleTolerance() - Method in interface nxopen.features.shipdesign.ShellTemplateBuilder
-
Returns the modeling angle tolerance.
- angleTolerance() - Method in interface nxopen.features.shipdesign.ShipPreparationBuilder
-
- angleTolerance() - Method in interface nxopen.features.WrapBuilder
-
Returns the angle tolerance used to determine the sampling of the curve during processing, and
the accuracy of the output.
- angleTolerance - Variable in class nxopen.FollowFilletRule.Data
-
Angle tolerance
- angleTolerance() - Method in interface nxopen.geometricanalysis.DeviationChecking
-
Returns the angle tolerance to be used for the deviation checking
License requirements: None.
- angleTolerance() - Method in interface nxopen.geometricutilities.CurveFitData
-
Returns the angle tolerance
License requirements: None.
- angleTolerance() - Method in interface nxopen.geometricutilities.DisplayResolutionBuilder
-
Returns the angle tolerance
License requirements: None.
- angleTolerance() - Method in interface nxopen.geometricutilities.MatchSurfaceBuilder
-
Returns the angle tolerance
License requirements: None.
- angleTolerance - Variable in class nxopen.preferences.PartVisualizationShade.AdvVisViewFacetTolerancesData
-
- angleTolerance - Variable in class nxopen.preferences.PartVisualizationShade.ShadedViewFacetTolerancesData
-
- angleTolerance() - Method in interface nxopen.routing.ElbowSnapSettings
-
Returns the tolerance within which to search for elbow angles.
- angleTolerance() - Method in interface nxopen.Section
-
Returns the angle tolerance
License requirements: gateway ("UG GATEWAY")
.
- angleTolerance() - Method in interface nxopen.SketchAutoConstrainBuilder
-
Returns the angle tolerance
License requirements: None.
- angleTolerance() - Method in interface nxopen.SketchIntersectionCurveBuilder
-
Returns the angular tolerance
License requirements: None.
- angleTolerance() - Method in interface nxopen.tooling.GuidedExtensionBuilder
-
Returns the angle tolerance for use in creating the guided extension surfaces
License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_2 ("advanced freeform modeling") OR ug_mold_design ("UG MOLD") OR die_engineering ("DIE ENGINEERING")
.
- angleTolerance - Variable in class nxopen.uf.UFModlFeatures.AskTaperFromEdges1Data
-
- angleToleranceData() - Method in interface nxopen.preferences.PartModeling
-
Returns the angle tolerance data.
- angleToleranceEdges() - Method in interface nxopen.cam.GeometrySet
-
Returns the angle tolerance
License requirements: None.
- angleToleranceValue() - Method in interface nxopen.tooling.FormingInsertBuilder
-
Returns the tangent edge angle tolerance value of forming region.
- angleToProjectionVector() - Method in interface nxopen.features.ProjectCurveBuilder
-
Returns the angle to projection vector
License requirements: None.
- angleType() - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder
-
Returns the angle setting
License requirements: None.
- angleType() - Method in interface nxopen.cam.BoundaryTurnMemberCorner
-
Returns the corner angle type
License requirements: None.
- angleType() - Method in interface nxopen.cam.ProbeInspectBorebossMoveBuilder
-
Returns the angle type
License requirements: None.
- angleType() - Method in interface nxopen.mechatronics.InclinometerBuilder
-
Returns the angle type.
- angleType - Variable in class nxopen.uf.UFModl.FlangeData
-
- angleType - Variable in class nxopen.uf.UFModl.SmbendData
-
- angleType - Variable in class nxopen.uf.UFSmd.GenPrefs
-
- angleUnit - Variable in class nxopen.cae.Result.ResultBasicUnit
-
- angleUnit() - Method in interface nxopen.cae.xyplot.AngleAxisStyleSetting
-
Returns the angle axis number unit
License requirements: None.
- AngleUnit - Class in nxopen.cae.xyplot
-
Represents the angle axis display value unit
- angleValue() - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder
-
Returns the angle value
License requirements: None.
- angleValue() - Method in interface nxopen.cam.BoundaryTurnMemberFineFinishCorner
-
Returns the fine_finish_corner angle value
License requirements: None.
- angleValue() - Method in interface nxopen.cam.InspectionOperationTransformBuilder
-
Returns the angle value
License requirements: None.
- angleValue() - Method in interface nxopen.cam.OperationTransformBuilder
-
Returns the angle value
License requirements: None.
- angleValue() - Method in interface nxopen.drawings.AssociativeAngleBuilder
-
Returns the angle value
License requirements: None.
- angleValue() - Method in interface nxopen.drawings.ViewStyleGeneralBuilder
-
- angleValue() - Method in interface nxopen.features.FitSurfaceBuilder
-
Returns the angle is fixed to a specific value
License requirements: None.
- angleValue() - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder
-
Returns the angle value
License requirements: die_engineering ("DIE ENGINEERING")
.
- angleValueOptimal() - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder
-
Returns the angle value optimal
License requirements: die_engineering ("DIE ENGINEERING")
.
- angTol - Variable in class nxopen.uf.UFCurve.OcfData
-
- ANGULAR - Static variable in class nxopen.annotations.DimensionMeasurementBuilder.MeasurementMethod
-
Angular measurement type
- ANGULAR - Static variable in class nxopen.annotations.FeatureControlFrameIndicatorBuilder.FcfIndicatorCharacteristic
-
- ANGULAR - Static variable in class nxopen.annotations.GeometricCharacteristic
-
Specifies angular characteristics
- ANGULAR - Static variable in class nxopen.annotations.SearchCriteriaDimensionBuilder.DimensionTypes
-
Angular
- ANGULAR - Static variable in class nxopen.cam.InspectionMethodBuilder.PolarSequenceDirectionTypes
-
Order by angular direction
- ANGULAR - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.ParamTolZoneShape
-
Angular
- ANGULAR - Static variable in class nxopen.cam.NcmWedmBuilder.LeadInMethodTypes
-
angular lead in
- ANGULAR - Static variable in class nxopen.cam.NcmWedmBuilder.LeadOutMethodTypes
-
angular lead out
- angular() - Method in interface nxopen.cam.StepoverBuilder
-
Returns the angular
License requirements: None.
- ANGULAR - Static variable in class nxopen.cam.StepoverBuilder.StepoverTypes
-
Angular
- angular() - Method in interface nxopen.ListCreator
-
Returns the m_angular * - Specifies the angular tolerance for Defined Level of Detail
License requirements: None.
- ANGULAR - Static variable in class nxopen.mechatronics.CamBuilder.AxisJointType
-
Angular
- ANGULAR - Static variable in class nxopen.mechatronics.ForceTorqueControlBuilder.AxisJointType
-
Angular
- ANGULAR - Static variable in class nxopen.mechatronics.GearBuilder.AxisJointType
-
Angular
- ANGULAR - Static variable in class nxopen.mechatronics.PositionControlBuilder.Axis
-
angular
- ANGULAR - Static variable in class nxopen.mechatronics.PositionSensorBuilder.AxisJointType
-
Angular
- ANGULAR - Static variable in class nxopen.mechatronics.SpeedControlBuilder.AxisJointType
-
Angular
- ANGULAR - Static variable in class nxopen.mechatronics.SpringDamperBuilder.AxisJointType
-
Angular
- ANGULAR - Static variable in class nxopen.mechatronics.ThreeJointCouplerBuilder.AxisJointType
-
Angular
- ANGULAR - Static variable in class nxopen.mechatronics.VelocitySensorBuilder.AxisJointType
-
Angular
- ANGULAR - Static variable in class nxopen.mechatronics.VirtualAxisBuilder.VirtualAxisType
-
- ANGULAR - Static variable in class nxopen.PositioningDimension.Subtype
-
Angular dimension
- ANGULAR_ACCELERATION - Static variable in class nxopen.cae.Result.Quantity
-
- ANGULAR_ACCELERATION - Static variable in class nxopen.cae.XyFunctionMeasure
-
Angular acceleration unit
- ANGULAR_ACCELERATION_DEGREE - Static variable in class nxopen.cae.XyFunctionUnit
-
Angular acceleration unit: degree/sec ^2
- ANGULAR_ACCELERATION_LEVEL_CROSSING_RATE - Static variable in class nxopen.cae.Result.Quantity
-
- ANGULAR_ACCELERATION_RADIAN - Static variable in class nxopen.cae.XyFunctionUnit
-
Angular acceleration unit: radian/sec ^2
- ANGULAR_ACCELERATION_REV_MIN2 - Static variable in class nxopen.cae.XyFunctionUnit
-
Angular acceleration unit: Revolutions Per Minute Squared
- ANGULAR_ACCELERATION_REV_SEC2 - Static variable in class nxopen.cae.XyFunctionUnit
-
Angular acceleration unit: Revolutions Per Second Squared
- ANGULAR_BLANKING - Static variable in class nxopen.tooling.ForceCalculationBuilder.ProcessTypes
-
angular blanking
- ANGULAR_DIM - Static variable in class nxopen.Sketch.ConstraintType
-
system will decide if it is major or minor
- ANGULAR_DIM - Static variable in class nxopen.uf.UFSket.ConType
-
- ANGULAR_DIRECTED_DIMENSION - Static variable in class nxopen.uf.UFGdt.DirectedDimensionType
-
- ANGULAR_DISPLACEMENT - Static variable in class nxopen.cae.XyFunctionMeasure
-
Angular displacement unit
- ANGULAR_DISPLACEMENT_DEGREE - Static variable in class nxopen.cae.XyFunctionUnit
-
Angular displacement unit: degree
- ANGULAR_DISPLACEMENT_PI_RAD - Static variable in class nxopen.cae.XyFunctionUnit
-
Angular displacement unit: pi-rad
- ANGULAR_DISPLACEMENT_RADIAN - Static variable in class nxopen.cae.XyFunctionUnit
-
Angular displacement unit: radian
- ANGULAR_DISPLACEMENT_REV - Static variable in class nxopen.cae.XyFunctionUnit
-
Angular displacement unit: Revolutions
- ANGULAR_EMBOSSING - Static variable in class nxopen.tooling.ForceCalculationBuilder.ProcessTypes
-
angular embossing
- ANGULAR_LINE - Static variable in class nxopen.cam.BoundaryTurnMemberFineFinishCorner.ValueType
-
- ANGULAR_MAGNITUDE - Static variable in class nxopen.motion.ControlInputPortBuilder.MeasuredComponent
-
Angular Magnitude
- ANGULAR_MAGNITUDE - Static variable in class nxopen.motion.MotionSensorBuilder.Component
-
angular magnitude component
- ANGULAR_MAJOR - Static variable in class nxopen.annotations.DimensionType
-
Major Angular dimension
- ANGULAR_MAJOR_SIZE - Static variable in class nxopen.uf.UFGdt.SizeValueType
-
- ANGULAR_MINOR - Static variable in class nxopen.annotations.DimensionType
-
Minor Angular dimension
- ANGULAR_MINOR_SIZE - Static variable in class nxopen.uf.UFGdt.SizeValueType
-
- ANGULAR_PIERCING - Static variable in class nxopen.tooling.ForceCalculationBuilder.ProcessTypes
-
angular piercing
- ANGULAR_TYPE - Static variable in class nxopen.uf.UFGdt.Characteristic
-
- ANGULAR_VELOCITY - Static variable in class nxopen.cae.Result.Quantity
-
- ANGULAR_VELOCITY - Static variable in class nxopen.cae.XyFunctionMeasure
-
Angular velocity unit
- ANGULAR_VELOCITY_DEGREE - Static variable in class nxopen.cae.XyFunctionUnit
-
Angular velocity unit: degree/sec
- ANGULAR_VELOCITY_LEVEL_CROSSING_RATE - Static variable in class nxopen.cae.Result.Quantity
-
- ANGULAR_VELOCITY_RADIAN - Static variable in class nxopen.cae.XyFunctionUnit
-
Angular velocity unit: radian/sec
- ANGULAR_VELOCITY_REV_MIN - Static variable in class nxopen.cae.XyFunctionUnit
-
Angular velocity unit: Revolutions Per Minute
- ANGULAR_VELOCITY_REV_SEC - Static variable in class nxopen.cae.XyFunctionUnit
-
Angular velocity unit: Revolutions Per Second
- angularAcceleration() - Method in interface nxopen.cae.DurSpecialistSuperpositionEventBuilder
-
Returns the unit load angular acceleration
License requirements: None.
- ANGULARACCELERATION - Static variable in class nxopen.cae.FrfSet.Measure
-
Angular Acceleration
- angularAccuracy() - Method in interface nxopen.tooling.CalculateAreaBuilder
-
Returns the angular accuracy used as the minimum angle between two reference planes.
- angularAxis() - Method in interface nxopen.geometricutilities.ModlMotion
-
- angularDampingExpression() - Method in interface nxopen.mechatronics.PreferencesBuilder
-
Returns the angular damping expression
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- angularDelta() - Method in interface nxopen.geometricutilities.PatternClocking
-
- angularDelta() - Method in interface nxopen.geometricutilities.PatternClockingBuilder
-
Returns the angular delta for circular clocking
License requirements: None.
- AngularDim - Interface in nxopen.features
-
Represents a angular dimension feature
To create or edit an instance of this class, use
AngularDimBuilder
Created in NX6.0.0
- angularDim() - Method in interface nxopen.features.shipdesign.PillarBuilder
-
Returns the angle that the pillar stock will be rotated about its path from its initial location.
- angularDim() - Method in interface nxopen.features.shipdesign.ShipCutoutBuilder
-
Returns the angular dimension used to rotate the cutout's profile
The angular dimension is only used for the Face2Lines placement method.
- angularDim() - Method in interface nxopen.features.shipdesign.SteelSupportBuilder
-
Returns the angular dimension used to rotate the support feature.
- angularDim() - Method in interface nxopen.features.shipdesign.SteelVentHolesBuilder
-
Returns the angular dimension used to rotate the profile of the vent holes
License requirements: None.
- AngularDimBuilder - Interface in nxopen.features
-
- AngularDimension - Interface in nxopen.annotations
-
Represents an angular dimension
Abstract class
.
- AngularDimension - Interface in nxopen.blockstyler
-
Represents a Angular Dimension block .
- angularDimension() - Method in interface nxopen.features.shipdesign.Cutout2Builder
-
Returns the angular dimension (used only for Face2Lines, Faces2Surfaces, FacesBetweenSurfacesSurface, FacesCentered)
License requirements: None.
- angularDimension() - Method in interface nxopen.features.shipdesign.PlateChamferBuilder
-
Returns the angular dimension
License requirements: None.
- angularDimension() - Method in interface nxopen.tooling.SlugRetentionBuilder
-
Returns the angular dimension
License requirements: None.
- AngularDimensionBuilder - Interface in nxopen.annotations
-
Represents a
AngularDimension
builder
This is an abstract class and cannot be instantiated.
- AngularDimensionFormat - Class in nxopen.annotations
-
Specifies the angular dimension format
- angularDimensionFormat() - Method in interface nxopen.annotations.UnitsFormatPreferences
-
Returns the angular dimension format
License requirements: None.
- angularDimensionValueDp - Variable in class nxopen.uf.UFDrf.DimensionPreferences
-
- angularDimensionValueDp - Variable in class nxopen.uf.UFDrf.DimensionPreferences1
-
- angularDimensionValuePrecision() - Method in interface nxopen.annotations.DimensionStyleBuilder
-
Returns the angular dimension value precision
License requirements: None.
- angularDimOffset() - Method in interface nxopen.features.shipdesign.VentilationHoles2Builder
-
Returns the angular dim offset
License requirements: None.
- angularDirection() - Method in interface nxopen.geometricutilities.ModlDistanceAngle
-
Returns the direction of angular dimensions.
- angularExp() - Method in interface nxopen.cae.CorrelFineTuneAlignmentBuilder
-
Returns the angular expression
License requirements: None.
- angularFrequency - Variable in class nxopen.mechatronics.CamProfileBuilder.Element
-
segment polynomial coefficient
- angularGridSize - Variable in class nxopen.preferences.WorkPlane.PolarGridSize
-
Angular grid line parameters
- ANGULARITY - Static variable in class nxopen.annotations.FeatureControlFrameBuilder.FcfCharacteristic
-
angularity
- ANGULARITY - Static variable in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.CharacteristicOptions
-
angularity
- ANGULARITY - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.TolType
-
Angularity
- angularLaw() - Method in interface nxopen.geometricutilities.OrientationMethodBuilder
-
Returns the angular law.
- AngularLimitJoint - Interface in nxopen.mechatronics
-
Represents the Angular Limit Joint.
- AngularLimitJointBuilder - Interface in nxopen.mechatronics
-
- AngularLimitJointCollection - Interface in nxopen.mechatronics
-
Represents a collection of Angular Limit Joint.
- angularLimitJoints() - Method in interface nxopen.mechatronics.PhysicsManager
-
- AngularLimits - Interface in nxopen.geometricutilities
-
Represents a angular limts data.
- angularLowerLimit() - Method in interface nxopen.mechatronics.ChainJointBuilder
-
Returns the angular lower limit.
- angularLowerLimit() - Method in interface nxopen.mechatronics.CylindricalJointBuilder
-
Returns the angular lower limit.
- angularMag - Variable in class nxopen.uf.UFMotion.LinkInitialVel
-
- angularPath() - Method in interface nxopen.mechatronics.PositionControlBuilder
-
Returns the angular path.
- AngularPatternSpacing - Interface in nxopen.geometricutilities
-
defines the various ways pattern instances can be
spaced within the pattern, particularly in the context of the
PatternDefinition class.
- AngularPatternSpacing.UsePitchOptions - Class in nxopen.geometricutilities
-
This defines Use Pitch As options
- angularPlaces() - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
Returns the angular decimal places
License requirements: None.
- angularPointCount() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns the number of points in angular direction
License requirements: None.
- angularSpacing() - Method in interface nxopen.geometricutilities.CircularPattern
-
Returns the angular spacing of the instances of the pattern
License requirements: None.
- AngularSpringJoint - Interface in nxopen.mechatronics
-
Represents the Angular Spring Joint.
- AngularSpringJointBuilder - Interface in nxopen.mechatronics
-
- AngularSpringJointCollection - Interface in nxopen.mechatronics
-
Represents a collection of Angular Spring Joint.
- angularSpringJoints() - Method in interface nxopen.mechatronics.PhysicsManager
-
- AngularSuppressZeros - Class in nxopen.annotations
-
Specifies the suppress zeros option for the angular dimension
- angularSuppressZeros() - Method in interface nxopen.annotations.UnitsStyleBuilder
-
Returns the angular suppress zeros option
License requirements: None.
- angularSuppressZeros - Variable in class nxopen.uf.UFDrf.UnitsFormatPreferences
-
- angularThreshold() - Method in interface nxopen.features.SmoothCurveStringBuilder
-
Returns the angular threshold when trying to connect curves.
- angularThreshold() - Method in interface nxopen.geometricanalysis.CurveContinuityBuilder
-
Returns the angular threshold
License requirements: None.
- angularThreshold() - Method in interface nxopen.geometricanalysis.SurfaceContinuityAnalysisBuilder
-
Returns the angular threshold
License requirements: None.
- angularTol() - Method in interface nxopen.STLCreator
-
Returns the angular tol - tolerance for angular
License requirements: None.
- AngularTolerance - Interface in nxopen.annotations
-
Represents angular tolerance .
- angularTolerance() - Method in interface nxopen.blockstyler.SectionBuilder
-
Returns the AngularTolerance
License requirements: None.
- angularTolerance() - Method in interface nxopen.blockstyler.SuperSection
-
Returns the AngularTolerance
License requirements: None.
- angularTolerance() - Method in interface nxopen.facet.STLImportBuilder
-
Returns the angular tolerance
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- angularTolerance() - Method in interface nxopen.features.AOCSBuilder
-
Returns the angular tolerance for the AOCS operation.
- angularTolerance() - Method in interface nxopen.features.ExtrudeBuilder
-
Returns the angle tolerance
License requirements: None.
- angularTolerance() - Method in interface nxopen.features.OvercrownBuilder
-
Returns the angular tolerance
License requirements: solid_modeling ("SOLIDS MODELING")
.
- angularTolerance() - Method in interface nxopen.features.sheetmetal.MetaformBuilder
-
Returns the angular tolerance
License requirements: None.
- angularTolerance() - Method in interface nxopen.features.shipdesign.BracketBuilder
-
Returns the angular tolerance (degrees)
The angular tolerance is used for:
bracket placement orign and orientation evaluation
bracket geometry construction
License requirements: None.
- angularTolerance() - Method in interface nxopen.features.shipdesign.CollarPlateBuilder
-
Returns the angular tolerance (degrees)
The angular tolerance is used for:
collar plate placement orign and orientation evaluation
collar plate geometry construction
License requirements: None.
- angularTolerance() - Method in interface nxopen.features.shipdesign.CopyObjectsBuilder
-
Returns the value of angular tolerance is used to define the angular difference from the qualified candidate face / plane normal to source face / plane normal.
- angularTolerance() - Method in interface nxopen.features.shipdesign.CopyPasteNewBuilder
-
Returns the value of angular tolerance is used to define the angular difference from qualified candidate face / plane normal to source face / plane normal.
- angularTolerance() - Method in interface nxopen.features.shipdesign.MirrorShipStructureBuilder
-
Returns the angular tolerance used for geometry comparison and defined in the customer defaults.
- angularTolerance() - Method in interface nxopen.features.shipdesign.ProfileBuilder
-
Returns the angular tolerance (degrees).
- angularTolerance() - Method in interface nxopen.features.shipdesign.ProfileCutoutBuilder
-
Returns the angular tolerance (degrees).
- angularTolerance() - Method in interface nxopen.features.shipdesign.ProfileTransitionBuilder
-
Returns the angular tolerance (degrees)
License requirements: None.
- angularTolerance() - Method in interface nxopen.features.shipdesign.SplitStandardPartBuilder
-
Returns the tolerance, in degrees, used to determine when angles are zero.
- angularTolerance() - Method in interface nxopen.features.shipdesign.StiffenerBuilder
-
Returns the angular tolerance (degrees)
License requirements: None.
- angularTolerance() - Method in interface nxopen.features.VarsweepBuilder
-
Returns the angle tolerance [degrees]
License requirements: None.
- angularTolerance() - Method in interface nxopen.preferences.SessionNXGateway
-
Returns the angular tolerance.
- angularTolerance() - Method in interface nxopen.SketchEvaluator
-
Returns the angle tolerance [degrees]
License requirements: None.
- angularTolerance() - Method in interface nxopen.STLImporter
-
Returns the angular tolerance.
- angularTolerance - Variable in class nxopen.uf.UFStd.StlParams
-
- angularTolerance - Variable in class nxopen.uf.UFStd.VrmlParams
-
- angularTolerance() - Method in interface nxopen.VRMLImporter
-
Returns the angular tolerance.
- angularToleranceFormat() - Method in interface nxopen.annotations.UnitsFormatPreferences
-
Returns the angular tolerance format
License requirements: None.
- angularToleranceValueDp - Variable in class nxopen.uf.UFDrf.DimensionPreferences
-
- angularToleranceValueDp - Variable in class nxopen.uf.UFDrf.DimensionPreferences1
-
- angularToleranceValuePrecision() - Method in interface nxopen.annotations.DimensionStyleBuilder
-
Returns the angular tolerance value precision
License requirements: None.
- angularUnits() - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
Returns the angular units
License requirements: None.
- angularUpperLimit() - Method in interface nxopen.mechatronics.ChainJointBuilder
-
Returns the angular upper limit.
- angularUpperLimit() - Method in interface nxopen.mechatronics.CylindricalJointBuilder
-
Returns the angular upper limit.
- angularVelocity() - Method in interface nxopen.cae.DurSpecialistSuperpositionEventBuilder
-
Returns the unit load angular velocity
License requirements: None.
- ANGULARVELOCITY - Static variable in class nxopen.cae.FrfSet.Measure
-
Angular Velocity
- angularVelocityDirection() - Method in interface nxopen.mechatronics.RigidBodyBuilder
-
Returns the angular velocity direction.
- angularVelocityMagnitude() - Method in interface nxopen.mechatronics.RigidBodyBuilder
-
Returns the angular velocity magnitude.
- animateCreateAnimation(int) - Method in interface nxopen.uf.UFSfPost
-
- animateDeleteAnimation(int) - Method in interface nxopen.uf.UFSfPost
-
- animateGunRotation() - Method in interface nxopen.tooldesigner.SetGunApproachBuilder
-
Returns the animate gun rotation
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- animateSetAnimCurFrame(int, int) - Method in interface nxopen.uf.UFSfPost
-
- animateSetAnimCurIter(int, int) - Method in interface nxopen.uf.UFSfPost
-
- animateSetAnimIter(int, boolean) - Method in interface nxopen.uf.UFSfPost
-
- animateSetAnimIters(int, int, int) - Method in interface nxopen.uf.UFSfPost
-
- animateSetAnimNumFrames(int, int) - Method in interface nxopen.uf.UFSfPost
-
- animateSetAnimType(int, int) - Method in interface nxopen.uf.UFSfPost
-
- animateStepAnimationFrame(int, boolean) - Method in interface nxopen.uf.UFSfPost
-
- Animation() - Constructor for class nxopen.cae.Post.Animation
-
- Animation(Post.AnimationType, Post.AnimationStyle, int, int, int, int, int, int, boolean, int, Post.AnimationStreamline, Post.AnimationIterationTypes, BaseIteration.IterationValueType) - Constructor for class nxopen.cae.Post.Animation
-
Constructor for the Animation object.
- ANIMATION - Static variable in class nxopen.cae.SimBcPlotContoursBuilder.PlotType
-
Animation
- animationAccuracy() - Method in interface nxopen.cam.SimulationOptionsBuilder
-
Returns the animation accuracy
License requirements: None.
- AnimationControl - Interface in nxopen.motion
-
Represents the
AnimationControl
An instance of this class can not be obtained
Created in NX9.0.0
- AnimationConversionBuilder - Interface in nxopen.mechatronics
-
- AnimationParameters() - Constructor for class nxopen.cae.Post.AnimationParameters
-
- AnimationParameters(Post.AnimationType, Post.AnimationStyle, int, Iteration, Iteration, int, boolean, int, Post.AnimationStreamline, Post.AnimationIterationTypes, BaseIteration.IterationValueType) - Constructor for class nxopen.cae.Post.AnimationParameters
-
Constructor for the AnimationParameters object.
- animationRun() - Method in interface nxopen.uf.UFMotion
-
- animationStepBackward() - Method in interface nxopen.motion.LoadTransferControl
-
Moves animation one step backward
License requirements: mechanisms ("MECHANISMS")
.
- animationStepForward() - Method in interface nxopen.motion.LoadTransferControl
-
Moves animation one step forward
License requirements: mechanisms ("MECHANISMS")
.
- animationStreamline - Variable in class nxopen.cae.Post.Animation
-
- animationStreamline - Variable in class nxopen.cae.Post.AnimationParameters
-
- AnimationStreamline() - Constructor for class nxopen.cae.Post.AnimationStreamline
-
- AnimationStreamline(boolean, Post.StreamlineSynchronization, double, double, int, boolean, int, double, double) - Constructor for class nxopen.cae.Post.AnimationStreamline
-
Constructor for the AnimationStreamline object.
- animationStyle - Variable in class nxopen.cae.Post.Animation
-
- animationStyle - Variable in class nxopen.cae.Post.AnimationParameters
-
- animationType - Variable in class nxopen.cae.Post.Animation
-
- animationType - Variable in class nxopen.cae.Post.AnimationParameters
-
- animEndIteration - Variable in class nxopen.cae.Post.AnimationParameters
-
end iteration
- animStartIteration - Variable in class nxopen.cae.Post.AnimationParameters
-
start iteration
- ANISOTROPIC - Static variable in class nxopen.PhysicalMaterial.Type
-
Anisotropic
- ANKLE_HEIGHT - Static variable in class nxopen.HumanData.AdvancedScalingType
-
Indicate scaling of ankle height
- annData - Variable in class nxopen.uf.UFDrf.AskAnnArcSegAnglesData
-
- annData - Variable in class nxopen.uf.UFDrf.AskAnnData
-
- annData - Variable in class nxopen.uf.UFDrf.AskAnnLineSegEndsData
-
- annData - Variable in class nxopen.uf.UFDrf.AskTextData
-
- annDataForm - Variable in class nxopen.uf.UFDrf.AskAnnData
-
- annDataType - Variable in class nxopen.uf.UFDrf.AskAnnData
-
- annoLayer() - Method in interface nxopen.features.SectionInertiaAnalysisBuilder
-
Returns the anno layer
License requirements: None.
- annOrigin - Variable in class nxopen.uf.UFDrf.AskAnnData
-
- AnnotateViewsBuilder - Interface in nxopen.drafting
-
This class is used to annotate views based on the knowledge fusion rules.
- AnnotateViewsBuilder.ExistingAutomaticAnnotation - Class in nxopen.drafting
-
Option to delete or preserve existing automatic annotations when annotation views command
is run.
- Annotation - Interface in nxopen.annotations
-
Represents an annotation / PMI (Product and Manufacturing Information) display instance
object.
- ANNOTATION - Static variable in class nxopen.annotations.ArcComponent.ArcType
-
annotation arc
- ANNOTATION - Static variable in class nxopen.annotations.LineComponent.LineType
-
annotation line
- annotation() - Method in interface nxopen.cae.aerostructures.MarginCalculationBuilder
-
Returns the Annotation
License requirements: nx_masterfem ("Finite Element Modeling")
.
- annotation - Variable in class nxopen.cae.ModeSet.ModeByIndexData
-
the annotation of the mode
- Annotation - Interface in nxopen.diagramming
-
Represents the Annotation class.
- ANNOTATION - Static variable in class nxopen.drawings.ConvertDraftingContentsBuilder.SelectConversionEntityType
-
- ANNOTATION - Static variable in class nxopen.drawings.DrawingRegionBuilder.RegionDraftingObjectType
-
- ANNOTATION - Static variable in class nxopen.layout2d.Layout2dComponentMemberType
-
- annotation() - Method in interface nxopen.pid.PreferencesBuilder
-
Returns the preferences annotation builder
License requirements: nx_pid_design_reader ("NX P and ID Design Reader") OR nx_pid_design_author ("NX P and ID Design Author")
.
- Annotation.AssociativeOriginData - Class in nxopen.annotations
-
Describes the geometry that an annotation's origin
is associated with
- annotation3dData() - Method in interface nxopen.PartSaveOptions
-
Returns the option indicating whether to generate 3D Annotation data and store in
NX part Quick Access Folder when you save the part file
License requirements: None.
- ANNOTATION_BALLOONS - Static variable in class nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter
-
Annotation Balloons Report Filter
- ANNOTATION_BALLOONS_LEADER_TERMINATOR - Static variable in class nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter
-
Annotation Balloons LeaderTerminator Report Filter
- ANNOTATION_BALLOONS_ORIGIN - Static variable in class nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter
-
Annotation Balloons Origin Report Filter
- ANNOTATION_BALLOONS_RETAINED_STATUS - Static variable in class nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter
-
Annotation Balloons Retained Status Report Filter
- ANNOTATION_BALLOONS_TEXT - Static variable in class nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter
-
Annotation Balloons Text Report Filter
- ANNOTATION_CENTERLINES - Static variable in class nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter
-
Annotation Centerlines Report Filter
- ANNOTATION_CROSSHATCH - Static variable in class nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter
-
Annotation Crosshatch Report Filter
- ANNOTATION_DFS - Static variable in class nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter
-
Annotation Datum Feature Symbol Report Filter
- ANNOTATION_DFSLEADER_TERMINATOR - Static variable in class nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter
-
Annotation Datum Feature Symbol Leader Terminator Report Filter
- ANNOTATION_DFSORIGIN - Static variable in class nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter
-
Annotation Datum Feature Symbol Origin Report Filter
- ANNOTATION_DFSRETAINED_STATUS - Static variable in class nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter
-
Annotation Datum Feature Symbol Retained Status Report Filter
- ANNOTATION_DFSTEXT - Static variable in class nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter
-
Annotation Datum Feature Symbol Text Report Filter
- ANNOTATION_DTS - Static variable in class nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter
-
Annotation Datum Target Symbol Report Filter
- ANNOTATION_DTSLEADER_TERMINATOR - Static variable in class nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter
-
Annotation Datum Target Symbol LeaderTerminator Report Filter
- ANNOTATION_DTSORIGIN - Static variable in class nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter
-
Annotation Datum Target Symbol Origin Report Filter
- ANNOTATION_DTSRETAINED_STATUS - Static variable in class nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter
-
Annotation Datum Target Symbol Retained Status Report Filter
- ANNOTATION_DTSTEXT - Static variable in class nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter
-
Annotation Datum Target Symbol Text Report Filter
- ANNOTATION_FCF - Static variable in class nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter
-
Annotation Feature Control Frame Report Filter
- ANNOTATION_FCFLEADER_TERMINATOR - Static variable in class nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter
-
Annotation Feature Control Frame Leader Terminator Report Filter
- ANNOTATION_FCFORIGIN - Static variable in class nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter
-
Annotation Feature Control Frame Origin Report Filter
- ANNOTATION_FCFRETAINED_STATUS - Static variable in class nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter
-
Annotation Feature Control Frame Retained Status Report Filter
- ANNOTATION_FCFTEXT - Static variable in class nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter
-
Annotation Feature Control Frame Text Report Filter
- ANNOTATION_INTER_SYMBOL - Static variable in class nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter
-
Annotation Intersection Symbol Report Filter
- ANNOTATION_NOTES - Static variable in class nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter
-
Annotation Notes Report Filter
- ANNOTATION_NOTES_LEADER_TERMINATOR - Static variable in class nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter
-
Annotation Notes Leader Terminator Report Filter
- ANNOTATION_NOTES_ORIGIN - Static variable in class nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter
-
Annotation Notes Origin Report Filter
- ANNOTATION_NOTES_RETAINED_STATUS - Static variable in class nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter
-
Annotation Notes Retained Status Report Filter
- ANNOTATION_NOTES_TEXT - Static variable in class nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter
-
Annotation Notes Text Report Filter
- ANNOTATION_SFS - Static variable in class nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter
-
Annotation Surface Finish Symbol Report Filter
- ANNOTATION_SFSLEADER_TERMINATOR - Static variable in class nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter
-
Annotation Surface Finish Symbol LeaderTerminator Report Filter
- ANNOTATION_SFSORIGIN - Static variable in class nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter
-
Annotation Surface Finish Symbol Origin Report Filter
- ANNOTATION_SFSRETAINED_STATUS - Static variable in class nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter
-
Annotation Surface Finish Symbol Retained Status Report Filter
- ANNOTATION_SFSTEXT - Static variable in class nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter
-
Annotation Surface Finish Symbol Text Report Filter
- ANNOTATION_TEXT - Static variable in class nxopen.cae.xyplot.TextType
-
Annotation text in vector plot
- ANNOTATION_TPS - Static variable in class nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter
-
Annotation Target Point Symbol Report Filter
- ANNOTATION_WELD_SYMBOL - Static variable in class nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter
-
Annotation Weld Symbol Report Filter
- ANNOTATION_WELD_SYMBOL_LEADER_TERMINATOR - Static variable in class nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter
-
Annotation Weld Symbol LeaderTerminator Report Filter
- ANNOTATION_WELD_SYMBOL_ORIGIN - Static variable in class nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter
-
Annotation Weld Symbol Origin Report Filter
- ANNOTATION_WELD_SYMBOL_RETAINED_STATUS - Static variable in class nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter
-
Annotation Weld Symbol Retained Status Report Filter
- ANNOTATION_WELD_SYMBOL_TEXT - Static variable in class nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter
-
Annotation Weld Symbol Text Report Filter
- AnnotationBox() - Constructor for class nxopen.cae.Post.AnnotationBox
-
- AnnotationBox(NXColor, NXColor, boolean, boolean, boolean) - Constructor for class nxopen.cae.Post.AnnotationBox
-
Constructor for the AnnotationBox object.
- AnnotationBuilder - Interface in nxopen.diagramming
-
Represents a AnnotationBuilder.
- annotationBuilder() - Method in interface nxopen.diagramming.CannedAnnotationBuilder
-
Returns the annotation of this canned annotation.
- AnnotationBuilder.TextTypeOption - Class in nxopen.diagramming
-
- AnnotationCollection - Interface in nxopen.diagramming
-
Represents a collection of Annotation.
- annotationInsideGeometry() - Method in interface nxopen.drafting.AutomationPreferencesBuilder
-
Returns the annotation inside geometry
License requirements: None.
- AnnotationManager - Interface in nxopen.annotations
-
Represents an object that manages annotation and PMI (Product and Manufacturing Information)
display instance objects.
- AnnotationManager.LoadSymbolFontFromSbfFileData - Class in nxopen.annotations
-
- annotationMode() - Method in interface nxopen.MeasureBuilder
-
Returns the annotation mode
License requirements: None.
- annotationOrigin() - Method in interface nxopen.annotations.Annotation
-
Returns the origin (location) of the annotation.
- annotationOrigin() - Method in interface nxopen.annotations.BendTableBuilder
-
Returns the bend table origin.
- AnnotationPlacement - Interface in nxopen.annotations
-
Represents an object that journals the adding of a leader and setting of the origin
for dialogs that use a builder .
- AnnotationPlacement.OriginData - Class in nxopen.annotations
-
- annotationPlane() - Method in interface nxopen.annotations.Annotation
-
Returns the annotation plane.
- annotationPreference() - Method in interface nxopen.annotations.BaseCustomSymbolBuilder
-
Returns the enum annot pref.
- AnnotationPreferences - Interface in nxopen.preferences
-
Represents the global preferences for annotations
To obtain an instance of this class, refer to
AnnotationManager
Created in NX3.0.0
- annotations() - Method in interface nxopen.BasePart
-
Returns the PMI Annotation Manager for part .
- annotations() - Method in interface nxopen.diagramming.DiagrammingManager
-
- annotations() - Method in interface nxopen.ObjectTypeSelector
-
Returns the annotations - This should be set to true if annotations are desired in the output file
License requirements: None.
- annotations - Variable in class nxopen.uf.UFGdt.AskTagsData
-
- annotationSetSeparator() - Method in interface nxopen.ame.GeneralAnnotationSettingsBuilder
-
Returns the separator for annotation set
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- annotationSettings() - Method in interface nxopen.drawings.SettingsBuilder
-
Returns the Annotation settings builder which stores the annotation settings
License requirements: None.
- AnnotationSettingsBuilder - Interface in nxopen.drawings
-
- AnnotationSettingsBuilder.AnnotationTypeEnum - Class in nxopen.drawings
-
enum is used to list out annotation types
- AnnotationSettingsBuilder.UnitsEnum - Class in nxopen.drawings
-
enum is used to list out different unit types
- annotationStyle() - Method in interface nxopen.annotations.EditSettingsBuilder
-
Returns the annotation style builder
License requirements: None.
- annotationStyle() - Method in interface nxopen.drafting.PreferencesBuilder
-
Returns the annotation style builder
License requirements: None.
- annotationStyle() - Method in interface nxopen.drawings.EditViewLabelSettingsBuilder
-
Returns the annotation style builder
License requirements: None.
- AnnotationTags() - Constructor for class nxopen.uf.UFGdt.AnnotationTags
-
- AnnotationTags(Tag[], int, Tag[], int, Tag[], int, int) - Constructor for class nxopen.uf.UFGdt.AnnotationTags
-
- annotationToExclude() - Method in interface nxopen.annotations.HatchBuilder
-
Returns the select annotation to exclude
License requirements: None.
- annotationType() - Method in interface nxopen.annotations.HatchBuilder
-
Returns the type of hatch object
License requirements: None.
- annotationType() - Method in interface nxopen.annotations.HatchFillSettingsBuilder
-
Returns the type of hatch object
License requirements: None.
- annotationView() - Method in interface nxopen.annotations.OriginBuilder
-
Returns the view of the annotation (drafting member views only)
License requirements: None.
- annotLeader() - Method in interface nxopen.formboard.ObjectAttributeReferenceBuilder
-
Returns the
LeaderBuilder
for the annotation
License requirements: routing_harness ("Routing Harness")
Created in NX7.5.0
- annTolerance() - Method in interface nxopen.fields.FieldTable
-
Returns
the approximate nearest neighbor (ANN) interpolation tolerance
License requirements: None.
- ANNULAR - Static variable in class nxopen.annotations.DatumTargetBuilder.Types
-
annular
- ANNULAR - Static variable in class nxopen.annotations.SearchCriteriaDatumTargetBuilder.DatumTargetTypes
-
annular type
- ANNULAR_REGION - Static variable in class nxopen.annotations.RegionBuilder.Types
-
annular
- ANSI - Static variable in class nxopen.annotations.SurfaceFinishBuilder.StandardType
-
ANSI
- ANSI - Static variable in class nxopen.annotations.SurfaceFinishStandard
-
ANSI
- ANSI - Static variable in class nxopen.annotations.WeldStandard
-
ANSI standard
- ANSI1982 - Static variable in class nxopen.uf.UFGdt.Standard
-
- ANSI_A - Static variable in class nxopen.preferences.SessionVisualizationHighQualityImage.ImageSizeType
-
- ANSI_ARROW - Static variable in class nxopen.uf.UFDraw.ArwHeadType
-
- ANSI_B - Static variable in class nxopen.preferences.SessionVisualizationHighQualityImage.ImageSizeType
-
- ANSI_C - Static variable in class nxopen.preferences.SessionVisualizationHighQualityImage.ImageSizeType
-
- ANSI_D - Static variable in class nxopen.preferences.SessionVisualizationHighQualityImage.ImageSizeType
-
- ANSI_DETAILED - Static variable in class nxopen.drawings.CustomViewSettingsBuilder.ThreadStandards
-
- ANSI_E - Static variable in class nxopen.preferences.SessionVisualizationHighQualityImage.ImageSizeType
-
- ANSI_SCHEMATIC - Static variable in class nxopen.drawings.CustomViewSettingsBuilder.ThreadStandards
-
- ANSI_SIMPLIFIED - Static variable in class nxopen.drawings.CustomViewSettingsBuilder.ThreadStandards
-
- ANSI_STANDARD - Static variable in class nxopen.drawings.SectionLineStyleBuilder.StandardStyle
-
Deprecated.
- ANSIA - Static variable in class nxopen.display.StudioImageCaptureBuilder.DrawingSizeEnumType
-
Use ANSI A drawing size
- ANSIB - Static variable in class nxopen.display.StudioImageCaptureBuilder.DrawingSizeEnumType
-
Use ANSI B drawing size
- ANSIC - Static variable in class nxopen.display.StudioImageCaptureBuilder.DrawingSizeEnumType
-
Use ANSI C drawing size
- ANSID - Static variable in class nxopen.display.StudioImageCaptureBuilder.DrawingSizeEnumType
-
Use ANSI D drawing size
- ANSIE - Static variable in class nxopen.display.StudioImageCaptureBuilder.DrawingSizeEnumType
-
Use ANSI E drawing size
- ANSUR - Static variable in class nxopen.HumanData.DatabaseType
-
- ANSUR - Static variable in class nxopen.HumanHandsDialogBuilder.DatabaseType
-
- ANSUR2 - Static variable in class nxopen.HumanHandsDialogBuilder.DatabaseType
-
- answer - Variable in class nxopen.cam.Path.IsToolpathEventAMotionData
-
- answer - Variable in class nxopen.cam.Path.IsToolpathEventUdeData
-
- answer - Variable in class nxopen.uf.UFNcgroup.CanAcceptMemberData
-
- answer - Variable in class nxopen.uf.UFNcgroup.IsAMemberData
-
- ANSYS - Static variable in class nxopen.cae.Result.Filetype
-
- ANTI - Static variable in class nxopen.cae.LaminatePlyGroup.Link
-
symmetric layup with reversed angles
- ANY - Static variable in class nxopen.ame.InterfaceAccessType
-
- ANY - Static variable in class nxopen.ame.PlcDataType
-
- ANY - Static variable in class nxopen.annotations.AngularSuppressZeros
-
Specifies any zeros suppressed
- ANY - Static variable in class nxopen.cae.ElementProjectBuilder.ElementDimensionType
-
beam and/or shell element
- ANY - Static variable in class nxopen.cae.ElementReflectBuilder.ElemDimType
-
any element
- ANY - Static variable in class nxopen.cae.ElementRotateBuilder.ElemDimensionType
-
any element can be selected
- ANY - Static variable in class nxopen.cae.ElementTranslateBuilder.ElemDimensionType
-
any element can be selected
- ANY - Static variable in class nxopen.cae.ElementTypeBuilder.ElementOrderType
-
any element
- ANY - Static variable in class nxopen.cam.InspectionMoveBuilder.ProbeTipTypes
-
Any tip type
- ANY - Static variable in class nxopen.display.DynamicSectionTypes.CapColorOption
-
User-specified color is used
- ANY - Static variable in class nxopen.display.DynamicSectionTypes.CurveColorOption
-
Use specified color
- ANY - Static variable in class nxopen.display.SectionCurveSettingsBuilder.ColorOptionType
-
Use specified color
- ANY - Static variable in class nxopen.drawings.MarkAsTemplateBuilder.ItemTypeEnum
-
- ANY - Static variable in class nxopen.features.shipdesign.ShipnameFieldBuilderType
-
Field whose value will be a user enterred string
- ANY - Static variable in class nxopen.NXObject.AttributeType
-
All types (used only for queries)
- ANY - Static variable in class nxopen.routing.RoutePartDescriptor.CharxType
-
- ANY - Static variable in class nxopen.RuleManager.RuleType
-
- ANY - Static variable in class nxopen.Sketch.ConstraintClass
-
Used in query methods that filter by constraint class
to select both types of constraints
- ANY - Static variable in class nxopen.tooling.TrimMoldComponentsBuilder.TargetScope
-
Select target bodies in any part of the entire assembly
- ANY - Static variable in class nxopen.uf.UFKf.Type
-
- ANY - Static variable in class nxopen.weld.WeldJointBuilder.WeldTypes
-
Any Joint type.
- ANY_ASSOC_OCC_LOADED - Static variable in class nxopen.annotations.DisplayPmiEffectivityMethod
-
- ANY_CONNECTING_PARTS - Static variable in class nxopen.weld.JointmarkBuilder.ReuseMethod
-
- ANY_CONVEXITY_ROLL_OVER - Static variable in class nxopen.features.EdgeBlendBuilder.Overlap
-
Any convexity,roll over
- ANY_DIRECTION - Static variable in class nxopen.diagramming.SheetElementBuilder.ResizeOptionType
-
- ANY_IN_ASSEMBLY - Static variable in class nxopen.DisplayManager.ShowHideScope
-
Show and hide objects from the entire displayed part
- ANY_IN_ASSEMBLY - Static variable in class nxopen.Selection.SelectionScope
-
Use any occurrence in the assembly
- ANY_OBJECT - Static variable in class nxopen.mechatronics.ObjectTransformerBuilder.TransformSourceType
-
Any copied objects
- ANY_OBJECT - Static variable in class nxopen.mechatronics.TransmitterEntryBuilder.TransmitterEntryCandidateType
-
Any rigid objects
- ANY_REF - Static variable in class nxopen.routing.RoutePartDescriptor.CharxType
-
- ANY_SOLID - Static variable in class nxopen.cae.ElementCreateBuilder.ElemDimType
-
any solid type
- ANY_SOLID - Static variable in class nxopen.cae.ElementTypeBuilder.ElementType
-
Any solid
- ANY_VIS - Static variable in class nxopen.uf.UFUndo.UserVisibility
-
- ANY_VISIBILITY - Static variable in class nxopen.Session.MarkVisibility
-
Use only in query methods
- anyBodiesWithoutMaterial() - Method in interface nxopen.PhysicalMaterialCollection
-
Returns true if there are bodies in the specified part that do not have a material assigned to them; false if all bodies in the part have a material assigned.
- anyBodiesWithoutPreferredMaterial() - Method in interface nxopen.PhysicalMaterialCollection
-
Returns true if there are bodies that do not have the preferred material assigned to them and false if all bodies are assigned the preferred material.
- ANYCOPIEDOBJECTS - Static variable in class nxopen.mechatronics.ObjectSinkBuilder.DeleteSourceType
-
Any copied objects
- anyPartsModified - Variable in class nxopen.PartCollection.SaveAllData
-
Indicates whether any parts
in the session were actually modified before the save operation
was called.
- ANYWHERE_ALONG_GUIDES - Static variable in class nxopen.features.SweptBuilder.SectionLocationTypes
-
Anywhere along Guides
- AO_ALL - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all analysis objects.
- AO_CURVE_CONTINUITY - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide curve continuity analysis objects.
- AO_CURVE_CURVATURE - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide curve analysis objects.
- AO_DEVIATION_GAUGE - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide deviation gauge analysis objects.
- AO_DRAFT_ANALYSIS - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide draft analysis objects.
- AO_FACE_ANALYSIS - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide face analysis objects.
- AO_FACE_CURVATURE - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide face curvature analysis objects.
- AO_GAP_FLUSHNESS - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide gap and flushness analysis objects.
- AO_GRID_ANALYSIS - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide grid analysis objects.
- AO_HIGHLIGHT_LINES - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide highlight lines analysis objects.
- AO_LOCAL_RADIUS - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide local radius analysis objects.
- AO_MOLD_FLOW - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide mold flow analysis objects.
- AO_SECTION_ANALYSIS - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide section analysis objects.
- AO_SURFACE_CONTINUITY - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide surface continuity analysis objects.
- AO_SURFACE_INTERSECTION - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide surface intersection analysis objects.
- AO_TRIM_ANGLE_CHECK - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide trim angle check analysis objects.
- AO_WALL_THICKNESS - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide wall thickness analysis objects.
- AOCS - Interface in nxopen.features
-
Represents a Offset In Face feature (aka Associative Offset Curve on Surface )
To create or edit an instance of this class, use
AOCSBuilder
Created in NX4.0.0
- AOCSBuilder - Interface in nxopen.features
-
Represents a Offset In Face(aka Associative offset curve on face)feature builder.
- AOCSBuilder.CurveOffsetTypes - Class in nxopen.features
-
AOCS builder curve offset type enum
- AOCSBuilder.Extend - Class in nxopen.features
-
AOCS builder extend to each other within section type enum.
- AOCSBuilder.ExtendToFace - Class in nxopen.features
-
AOCS builder extend to face edges type enum.
- AOCSBuilder.FilletOptions - Class in nxopen.features
-
AOCS builder fillet options type enum.
- AOCSBuilder.OffsetDirection - Class in nxopen.features
-
AOCS builder offset direction type enum.
- AOCSBuilder.OffsetDistanceType - Class in nxopen.features
-
AOCS builder offset distance type enum.
- AOCSBuilder.OffsetType - Class in nxopen.features
-
AOCS builder offset type enum.
- AOCSBuilder.Trim - Class in nxopen.features
-
AOCS builder trim to each other within section type enum.
- AOM_IDENT - Static variable in class nxopen.ame.PlcDataType
-
- aoutput() - Method in interface nxopen.cam.AlongMachineAxisMoveBuilder
-
Returns the A output
License requirements: None.
- ap1Left() - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder
-
Returns the left AP1 alternative point.
- ap1LeftFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder
-
Returns the left AP1 alternative point flag.
- ap1Right() - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder
-
Returns the right AP1 alternative point.
- ap1RightFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder
-
Returns the right AP1 alternative point flag.
- AP203 - Static variable in class nxopen.StepCreator.ExportAsOption
-
export using AP203
- AP214 - Static variable in class nxopen.StepCreator.ExportAsOption
-
export using AP214
- AP242 - Static variable in class nxopen.StepCreator.ExportAsOption
-
export using AP242
- AP242XML - Static variable in class nxopen.JtCreator.FileStructure
-
JTs with AP242XML
- ap2Left() - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder
-
Returns the left AP2 alternative point.
- ap2LeftFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder
-
Returns the left AP2 alternative point flag.
- ap2Offset() - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder
-
Returns the offset used to position AP2.
- ap2Right() - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder
-
Returns the right AP2 alternative point.
- ap2RightFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder
-
Returns the right AP2 alternative point flag.
- ap3Left() - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder
-
Returns the left AP3 alternative point.
- ap3LeftFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder
-
Returns the left AP3 alternative point flag.
- ap3Right() - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder
-
Returns the right AP3 alternative point.
- ap3RightFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder
-
Returns the right AP3 alternative point flag.
- aperture() - Method in interface nxopen.HumanHandsDialogBuilder
-
Returns the aperture
License requirements: ug_human ("Human Modelling")
.
- apertureType() - Method in interface nxopen.display.CameraBuilder
-
Returns the aperture
License requirements: None.
- apexCurve() - Method in interface nxopen.features.SectionSurfaceBuilder
-
- apexCurve() - Method in interface nxopen.features.SectionSurfaceBuilderEx
-
Returns the apex curve.
- apiExitName() - Method in interface nxopen.cam.WedmGeomBuilder
-
Returns the api exit name
License requirements: cam_base ("CAM BASE")
.
- apiExitName() - Method in interface nxopen.cam.WedmOperationBuilder
-
Returns the api exit name
License requirements: cam_base ("CAM BASE")
.
- apillar() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the collector containing the faces and facetted bodies of the A-Pillar
License requirements: None.
- apillarFeature() - Method in interface nxopen.features.vehicledesign.HeadImpactBuilder
-
Returns the a-pillar feature for this head impact study.
- apillarLeft() - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarWizardBuilder
-
Returns the left A pillar geometry.
- apillarRight() - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarWizardBuilder
-
Returns the right A pillar geometry.
- apiType() - Method in interface nxopen.cae.LaminateImportedLayupBuilder
-
Returns the external api selected for layup import
License requirements: None.
- APLUS - Static variable in class nxopen.PrintBuilder.PaperSize
-
SuperA/A4 227 x 356 -millimeters
- APP_BODY_SOURCE - Static variable in class nxopen.uf.UFBrep.TopoSource
-
- APP_TRIMSURF_SOURCE - Static variable in class nxopen.uf.UFBrep.TopoSource
-
- APPARENT_CHAINING - Static variable in class nxopen.SelectionIntentRule.RuleType
-
- APPARENT_TEMPERATURE - Static variable in class nxopen.cae.Result.Quantity
-
- ApparentChainingRule - Interface in nxopen
-
Represents a
SelectionIntentRule
that collects curves which appear connected or tangent connected in a particular drafting view.
- ApparentChainingRule.Data - Class in nxopen
-
- ApparentChainingRuleSelection - Class in nxopen
-
Selection Intent filter method to use with apparent chaining.
- ApparentChainingRuleType - Class in nxopen
-
Selection Intent method to use with apparent chaining.
- appCurve - Variable in class nxopen.uf.UFModl.SmbendData
-
- appCurveType - Variable in class nxopen.uf.UFModl.SmbendData
-
- APPDATA - Static variable in class nxopen.Session.ProjectAssignmentObjectType
-
data set
- AppData() - Constructor for class nxopen.uf.UFCambnd.AppData
-
- AppData(int, double, int, double[], int, UFCam.FeedrateUnit, double, int, double, int, UFCam.ToolPosition) - Constructor for class nxopen.uf.UFCambnd.AppData
-
- appData - Variable in class nxopen.uf.UFCambnd.BoundaryData
-
- AppData() - Constructor for class nxopen.uf.UFCamgeom.AppData
-
- AppData(int, double, int, double[], int, double[], int, UFCam.FeedrateUnit, double, int, int, double, double, int, UFCam.AvoidanceType) - Constructor for class nxopen.uf.UFCamgeom.AppData
-
- appearance() - Method in interface nxopen.features.HumanBuilder
-
Returns the human appearance data
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- append(NamingRuleBuilder[]) - Method in interface nxopen.ame.NamingRuleBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(NamingRuleBuilder) - Method in interface nxopen.ame.NamingRuleBuilderList
-
Appends an object to the list
License requirements: None.
- append(TypeMappingBuilder[]) - Method in interface nxopen.ame.TypeMappingBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(TypeMappingBuilder) - Method in interface nxopen.ame.TypeMappingBuilderList
-
Appends an object to the list
License requirements: None.
- append(ArbitraryAreaSeedBuilder[]) - Method in interface nxopen.annotations.ArbitraryAreaSeedBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(ArbitraryAreaSeedBuilder) - Method in interface nxopen.annotations.ArbitraryAreaSeedBuilderList
-
Appends an object to the list
License requirements: None.
- append(DatumReferenceBuilder[]) - Method in interface nxopen.annotations.DatumReferenceBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(DatumReferenceBuilder) - Method in interface nxopen.annotations.DatumReferenceBuilderList
-
Appends an object to the list
License requirements: None.
- append(FeatureControlFrameDataBuilder[]) - Method in interface nxopen.annotations.FeatureControlFrameDataBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(FeatureControlFrameDataBuilder) - Method in interface nxopen.annotations.FeatureControlFrameDataBuilderList
-
Appends an object to the list
License requirements: None.
- append(FeatureControlFrameIndicatorBuilder[]) - Method in interface nxopen.annotations.FeatureControlFrameIndicatorBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(FeatureControlFrameIndicatorBuilder) - Method in interface nxopen.annotations.FeatureControlFrameIndicatorBuilderList
-
Appends an object to the list
License requirements: None.
- append(LeaderData[]) - Method in interface nxopen.annotations.LeaderDataList
-
Appends a set of objects to the list
License requirements: None.
- append(LeaderData) - Method in interface nxopen.annotations.LeaderDataList
-
Appends an object to the list
License requirements: None.
- append(MasterSymbolListItemBuilder[]) - Method in interface nxopen.annotations.MasterSymbolListItemBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(MasterSymbolListItemBuilder) - Method in interface nxopen.annotations.MasterSymbolListItemBuilderList
-
Appends an object to the list
License requirements: None.
- append(SymbolCatalogParameterBuilder[]) - Method in interface nxopen.annotations.SymbolCatalogParameterBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(SymbolCatalogParameterBuilder) - Method in interface nxopen.annotations.SymbolCatalogParameterBuilderList
-
Appends an object to the list
License requirements: None.
- append(TitleBlockCellBuilder[]) - Method in interface nxopen.annotations.TitleBlockCellBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(TitleBlockCellBuilder) - Method in interface nxopen.annotations.TitleBlockCellBuilderList
-
Appends an object to the list
License requirements: None.
- append(Partition[]) - Method in interface nxopen.assemblies.PartitionList
-
Appends a set of objects to the list
License requirements: None.
- append(Partition) - Method in interface nxopen.assemblies.PartitionList
-
Appends an object to the list
License requirements: None.
- append(Body[]) - Method in interface nxopen.BodyList
-
Appends a set of objects to the list
License requirements: None.
- append(Body) - Method in interface nxopen.BodyList
-
Appends an object to the list
License requirements: None.
- APPEND - Static variable in class nxopen.cae.AfuManager.WritingFileMode
-
Opens a file for appending data to the end of the file
- APPEND - Static variable in class nxopen.cae.AfuMathOperation.OutputType
-
Appends the new AFU Data Record to the source AFU file
- append(DependentMeshListItemBuilder[]) - Method in interface nxopen.cae.DependentMeshListItemBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(DependentMeshListItemBuilder) - Method in interface nxopen.cae.DependentMeshListItemBuilderList
-
Appends an object to the list
License requirements: None.
- append(ManualSweepBetweenListItemSelection[]) - Method in interface nxopen.cae.ManualSweepBetweenListItemSelectionList
-
Appends a set of objects to the list
License requirements: None.
- append(ManualSweepBetweenListItemSelection) - Method in interface nxopen.cae.ManualSweepBetweenListItemSelectionList
-
Appends an object to the list
License requirements: None.
- append(MeshManualSweepBetweenListItemSelection[]) - Method in interface nxopen.cae.MeshManualSweepBetweenListItemSelectionList
-
Appends a set of objects to the list
License requirements: None.
- append(MeshManualSweepBetweenListItemSelection) - Method in interface nxopen.cae.MeshManualSweepBetweenListItemSelectionList
-
Appends an object to the list
License requirements: None.
- append(BoundaryMemberSet[]) - Method in interface nxopen.cam.BoundaryMemberSetList
-
Appends a set of objects to the list
License requirements: None.
- append(BoundaryMemberSet) - Method in interface nxopen.cam.BoundaryMemberSetList
-
Appends an object to the list
License requirements: None.
- append(BoundarySet[]) - Method in interface nxopen.cam.BoundarySetList
-
Appends a set of objects to the list
License requirements: None.
- append(BoundarySet) - Method in interface nxopen.cam.BoundarySetList
-
Appends an object to the list
License requirements: None.
- append(BoundaryTurnVariableStockSet[]) - Method in interface nxopen.cam.BoundaryTurnVariableStockSetList
-
Appends a set of objects to the list
License requirements: None.
- append(BoundaryTurnVariableStockSet) - Method in interface nxopen.cam.BoundaryTurnVariableStockSetList
-
Appends an object to the list
License requirements: None.
- append(CAMFeature[]) - Method in interface nxopen.cam.CAMFeatureList
-
Appends a set of objects to the list
License requirements: None.
- append(CAMFeature) - Method in interface nxopen.cam.CAMFeatureList
-
Appends an object to the list
License requirements: None.
- append(CollisionPairBuilder[]) - Method in interface nxopen.cam.CollisionPairBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(CollisionPairBuilder) - Method in interface nxopen.cam.CollisionPairBuilderList
-
Appends an object to the list
License requirements: None.
- append(CustomLoopSet[]) - Method in interface nxopen.cam.CustomLoopSetList
-
Appends a set of objects to the list
License requirements: None.
- append(CustomLoopSet) - Method in interface nxopen.cam.CustomLoopSetList
-
Appends an object to the list
License requirements: None.
- append(CutVolume[]) - Method in interface nxopen.cam.CutVolumeList
-
Appends a set of objects to the list
License requirements: None.
- append(CutVolume) - Method in interface nxopen.cam.CutVolumeList
-
Appends an object to the list
License requirements: None.
- append(DriveChainItemBuilder[]) - Method in interface nxopen.cam.DriveChainItemBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(DriveChainItemBuilder) - Method in interface nxopen.cam.DriveChainItemBuilderList
-
Appends an object to the list
License requirements: None.
- append(GeometrySet[]) - Method in interface nxopen.cam.GeometrySetList
-
Appends a set of objects to the list
License requirements: None.
- append(GeometrySet) - Method in interface nxopen.cam.GeometrySetList
-
Appends an object to the list
License requirements: None.
- append(HoldingSystemBuilder[]) - Method in interface nxopen.cam.HoldingSystemBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(HoldingSystemBuilder) - Method in interface nxopen.cam.HoldingSystemBuilderList
-
Appends an object to the list
License requirements: None.
- append(HoleBossSet[]) - Method in interface nxopen.cam.HoleBossSetList
-
Appends a set of objects to the list
License requirements: None.
- append(HoleBossSet) - Method in interface nxopen.cam.HoleBossSetList
-
Appends an object to the list
License requirements: None.
- append(InPathEventDataBuilder[]) - Method in interface nxopen.cam.InPathEventDataBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(InPathEventDataBuilder) - Method in interface nxopen.cam.InPathEventDataBuilderList
-
Appends an object to the list
License requirements: None.
- append(LaserControlPoint[]) - Method in interface nxopen.cam.LaserControlPointList
-
Appends a set of objects to the list
License requirements: None.
- append(LaserControlPoint) - Method in interface nxopen.cam.LaserControlPointList
-
Appends an object to the list
License requirements: None.
- append(ManualFeatureBuilder[]) - Method in interface nxopen.cam.ManualFeatureBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(ManualFeatureBuilder) - Method in interface nxopen.cam.ManualFeatureBuilderList
-
Appends an object to the list
License requirements: None.
- append(Splitter[]) - Method in interface nxopen.cam.SplitterList
-
Appends a set of objects to the list
License requirements: None.
- append(Splitter) - Method in interface nxopen.cam.SplitterList
-
Appends an object to the list
License requirements: None.
- append(SurfaceDriveGeometrySet[]) - Method in interface nxopen.cam.SurfaceDriveGeometrySetList
-
Appends a set of objects to the list
License requirements: None.
- append(SurfaceDriveGeometrySet) - Method in interface nxopen.cam.SurfaceDriveGeometrySetList
-
Appends an object to the list
License requirements: None.
- append(TabPointDataBuilder[]) - Method in interface nxopen.cam.TabPointDataBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(TabPointDataBuilder) - Method in interface nxopen.cam.TabPointDataBuilderList
-
Appends an object to the list
License requirements: None.
- append(ThreadedBossSet[]) - Method in interface nxopen.cam.ThreadedBossSetList
-
Appends a set of objects to the list
License requirements: None.
- append(ThreadedBossSet) - Method in interface nxopen.cam.ThreadedBossSetList
-
Appends an object to the list
License requirements: None.
- append(ThreadedHoleSet[]) - Method in interface nxopen.cam.ThreadedHoleSetList
-
Appends a set of objects to the list
License requirements: None.
- append(ThreadedHoleSet) - Method in interface nxopen.cam.ThreadedHoleSetList
-
Appends an object to the list
License requirements: None.
- append(ToolPathSplitItemBuilder[]) - Method in interface nxopen.cam.ToolPathSplitItemBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(ToolPathSplitItemBuilder) - Method in interface nxopen.cam.ToolPathSplitItemBuilderList
-
Appends an object to the list
License requirements: None.
- append(Ude[]) - Method in interface nxopen.cam.UdeList
-
Appends a set of objects to the list
License requirements: None.
- append(Ude) - Method in interface nxopen.cam.UdeList
-
Appends an object to the list
License requirements: None.
- append(WedmCustomBoundaryDataBuilder[]) - Method in interface nxopen.cam.WedmCustomBoundaryDataBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(WedmCustomBoundaryDataBuilder) - Method in interface nxopen.cam.WedmCustomBoundaryDataBuilderList
-
Appends an object to the list
License requirements: None.
- append(WireGuide[]) - Method in interface nxopen.cam.WireGuideList
-
Appends a set of objects to the list
License requirements: None.
- append(WireGuide) - Method in interface nxopen.cam.WireGuideList
-
Appends an object to the list
License requirements: None.
- append(DateItemBuilder[]) - Method in interface nxopen.DateItemBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(DateItemBuilder) - Method in interface nxopen.DateItemBuilderList
-
Appends an object to the list
License requirements: None.
- append(ConnectionLocationBuilder[]) - Method in interface nxopen.diagramming.ConnectionLocationBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(ConnectionLocationBuilder) - Method in interface nxopen.diagramming.ConnectionLocationBuilderList
-
Appends an object to the list
License requirements: None.
- append(LeaderLineBuilder[]) - Method in interface nxopen.diagramming.LeaderLineBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(LeaderLineBuilder) - Method in interface nxopen.diagramming.LeaderLineBuilderList
-
Appends an object to the list
License requirements: None.
- append(PortBuilder[]) - Method in interface nxopen.diagramming.PortBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(PortBuilder) - Method in interface nxopen.diagramming.PortBuilderList
-
Appends an object to the list
License requirements: None.
- append(LineTypeBuilder[]) - Method in interface nxopen.diagramminglibraryauthor.LineTypeBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(LineTypeBuilder) - Method in interface nxopen.diagramminglibraryauthor.LineTypeBuilderList
-
Appends an object to the list
License requirements: None.
- append(DieAssistantFlangeProfile[]) - Method in interface nxopen.die.DieAssistantFlangeProfileList
-
Appends a set of objects to the list
License requirements: None.
- append(DieAssistantFlangeProfile) - Method in interface nxopen.die.DieAssistantFlangeProfileList
-
Appends an object to the list
License requirements: None.
- append(DieAssistantTrimProfile[]) - Method in interface nxopen.die.DieAssistantTrimProfileList
-
Appends a set of objects to the list
License requirements: None.
- append(DieAssistantTrimProfile) - Method in interface nxopen.die.DieAssistantTrimProfileList
-
Appends an object to the list
License requirements: None.
- append(DieBooleanBuilder[]) - Method in interface nxopen.die.DieBooleanBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(DieBooleanBuilder) - Method in interface nxopen.die.DieBooleanBuilderList
-
Appends an object to the list
License requirements: None.
- append(DieLimitsBuilder[]) - Method in interface nxopen.die.DieLimitsBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(DieLimitsBuilder) - Method in interface nxopen.die.DieLimitsBuilderList
-
Appends an object to the list
License requirements: None.
- append(DieLocationBuilder[]) - Method in interface nxopen.die.DieLocationBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(DieLocationBuilder) - Method in interface nxopen.die.DieLocationBuilderList
-
Appends an object to the list
License requirements: None.
- append(DrawBeadSegmentBuilder[]) - Method in interface nxopen.die.DrawBeadSegmentBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(DrawBeadSegmentBuilder) - Method in interface nxopen.die.DrawBeadSegmentBuilderList
-
Appends an object to the list
License requirements: None.
- append(PierceItemBuilder[]) - Method in interface nxopen.die.PierceItemBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(PierceItemBuilder) - Method in interface nxopen.die.PierceItemBuilderList
-
Appends an object to the list
License requirements: None.
- append(PointCloudClippingBoxesListItemBuilder[]) - Method in interface nxopen.display.PointCloudClippingBoxesListItemBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(PointCloudClippingBoxesListItemBuilder) - Method in interface nxopen.display.PointCloudClippingBoxesListItemBuilderList
-
Appends an object to the list
License requirements: None.
- append(AttributeItemBuilder[]) - Method in interface nxopen.drafting.AttributeItemBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(AttributeItemBuilder) - Method in interface nxopen.drafting.AttributeItemBuilderList
-
Appends an object to the list
License requirements: None.
- append(PrimaryContentItemBuilder[]) - Method in interface nxopen.drafting.PrimaryContentItemBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(PrimaryContentItemBuilder) - Method in interface nxopen.drafting.PrimaryContentItemBuilderList
-
Appends an object to the list
License requirements: None.
- append(SectionLineSegmentBuilder[]) - Method in interface nxopen.drawings.SectionLineSegmentBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(SectionLineSegmentBuilder) - Method in interface nxopen.drawings.SectionLineSegmentBuilderList
-
Appends an object to the list
License requirements: None.
- append(SectionLineSegmentPointBuilder) - Method in interface nxopen.drawings.SectionLineSegmentPointListBuilder
-
- append(ShipDraftingViewLinesBuilder[]) - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(ShipDraftingViewLinesBuilder) - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilderList
-
Appends an object to the list
License requirements: None.
- append(ViewStyleShipbuildingLinesBuilder[]) - Method in interface nxopen.drawings.ViewStyleShipbuildingLinesBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(ViewStyleShipbuildingLinesBuilder) - Method in interface nxopen.drawings.ViewStyleShipbuildingLinesBuilderList
-
Appends an object to the list
License requirements: None.
- append(ExpressionCollectorSet[]) - Method in interface nxopen.ExpressionCollectorSetList
-
Appends a set of objects to the list
License requirements: None.
- append(ExpressionCollectorSet) - Method in interface nxopen.ExpressionCollectorSetList
-
Appends an object to the list
License requirements: None.
- append(ExpressionSectionSet[]) - Method in interface nxopen.ExpressionSectionSetList
-
Appends a set of objects to the list
License requirements: None.
- append(ExpressionSectionSet) - Method in interface nxopen.ExpressionSectionSetList
-
Appends an object to the list
License requirements: None.
- append(Feature[]) - Method in interface nxopen.features.FeatureList
-
Appends a set of objects to the list
License requirements: None.
- append(Feature) - Method in interface nxopen.features.FeatureList
-
Appends an object to the list
License requirements: None.
- append(GeometricConstraintData) - Method in interface nxopen.features.GeometricConstraintDataManager
-
- append(GeometricConstraintDataManager) - Method in interface nxopen.features.GeometricConstraintDataSetManager
-
- append(GlobalShapingCurveOffsetBuilder[]) - Method in interface nxopen.features.GlobalShapingCurveOffsetBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(GlobalShapingCurveOffsetBuilder) - Method in interface nxopen.features.GlobalShapingCurveOffsetBuilderList
-
Appends an object to the list
License requirements: None.
- append(GlobalShapingPointOffsetBuilder[]) - Method in interface nxopen.features.GlobalShapingPointOffsetBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(GlobalShapingPointOffsetBuilder) - Method in interface nxopen.features.GlobalShapingPointOffsetBuilderList
-
Appends an object to the list
License requirements: None.
- append(PartGeometryCopySelectBuilder[]) - Method in interface nxopen.features.PartGeometryCopySelectBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(PartGeometryCopySelectBuilder) - Method in interface nxopen.features.PartGeometryCopySelectBuilderList
-
Appends an object to the list
License requirements: None.
- append(PointSetFacePercentageBuilder[]) - Method in interface nxopen.features.PointSetFacePercentageBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(PointSetFacePercentageBuilder) - Method in interface nxopen.features.PointSetFacePercentageBuilderList
-
Appends an object to the list
License requirements: None.
- append(RegionListItemBuilder[]) - Method in interface nxopen.features.RegionListItemBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(RegionListItemBuilder) - Method in interface nxopen.features.RegionListItemBuilderList
-
Appends an object to the list
License requirements: None.
- append(BendListItemBuilder[]) - Method in interface nxopen.features.sheetmetal.BendListItemBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(BendListItemBuilder) - Method in interface nxopen.features.sheetmetal.BendListItemBuilderList
-
Appends an object to the list
License requirements: None.
- append(ConvertInputListItemBuilder[]) - Method in interface nxopen.features.sheetmetal.ConvertInputListItemBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(ConvertInputListItemBuilder) - Method in interface nxopen.features.sheetmetal.ConvertInputListItemBuilderList
-
Appends an object to the list
License requirements: None.
- append(FeatureBendPropertiesBuilder[]) - Method in interface nxopen.features.sheetmetal.FeatureBendPropertiesBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(FeatureBendPropertiesBuilder) - Method in interface nxopen.features.sheetmetal.FeatureBendPropertiesBuilderList
-
Appends an object to the list
License requirements: None.
- append(JoggleInputListItemBuilder[]) - Method in interface nxopen.features.sheetmetal.JoggleInputListItemBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(JoggleInputListItemBuilder) - Method in interface nxopen.features.sheetmetal.JoggleInputListItemBuilderList
-
Appends an object to the list
License requirements: None.
- append(SMBoundaryConditionBuilder[]) - Method in interface nxopen.features.sheetmetal.SMBoundaryConditionBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(SMBoundaryConditionBuilder) - Method in interface nxopen.features.sheetmetal.SMBoundaryConditionBuilderList
-
Appends an object to the list
License requirements: None.
- append(AnchorPoint[]) - Method in interface nxopen.features.shipdesign.AnchorPointList
-
Appends a set of objects to the list
License requirements: None.
- append(AnchorPoint) - Method in interface nxopen.features.shipdesign.AnchorPointList
-
Appends an object to the list
License requirements: None.
- append(BulkHeadListItemBuilder[]) - Method in interface nxopen.features.shipdesign.BulkHeadListItemBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(BulkHeadListItemBuilder) - Method in interface nxopen.features.shipdesign.BulkHeadListItemBuilderList
-
Appends an object to the list
License requirements: None.
- append(CornerCutListItemBuilder[]) - Method in interface nxopen.features.shipdesign.CornerCutListItemBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(CornerCutListItemBuilder) - Method in interface nxopen.features.shipdesign.CornerCutListItemBuilderList
-
Appends an object to the list
License requirements: None.
- append(DeckListItemBuilder[]) - Method in interface nxopen.features.shipdesign.DeckListItemBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(DeckListItemBuilder) - Method in interface nxopen.features.shipdesign.DeckListItemBuilderList
-
Appends an object to the list
License requirements: None.
- append(DrawingPartBuilder[]) - Method in interface nxopen.features.shipdesign.DrawingPartBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(DrawingPartBuilder) - Method in interface nxopen.features.shipdesign.DrawingPartBuilderList
-
Appends an object to the list
License requirements: None.
- append(DrawingSheetBuilder[]) - Method in interface nxopen.features.shipdesign.DrawingSheetBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(DrawingSheetBuilder) - Method in interface nxopen.features.shipdesign.DrawingSheetBuilderList
-
Appends an object to the list
License requirements: None.
- append(ItFrameListItemBuilder[]) - Method in interface nxopen.features.shipdesign.ItFrameListItemBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(ItFrameListItemBuilder) - Method in interface nxopen.features.shipdesign.ItFrameListItemBuilderList
-
Appends an object to the list
License requirements: None.
- append(OrientationRegionItemBuilder[]) - Method in interface nxopen.features.shipdesign.OrientationRegionItemBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(OrientationRegionItemBuilder) - Method in interface nxopen.features.shipdesign.OrientationRegionItemBuilderList
-
Appends an object to the list
License requirements: None.
- append(PlaneListBuilder[]) - Method in interface nxopen.features.shipdesign.PlaneListBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(PlaneListBuilder) - Method in interface nxopen.features.shipdesign.PlaneListBuilderList
-
Appends an object to the list
License requirements: None.
- append(PlateBoundaryOptionBuilder[]) - Method in interface nxopen.features.shipdesign.PlateBoundaryOptionBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(PlateBoundaryOptionBuilder) - Method in interface nxopen.features.shipdesign.PlateBoundaryOptionBuilderList
-
Appends an object to the list
License requirements: None.
- append(SeamBlockBuilder[]) - Method in interface nxopen.features.shipdesign.SeamBlockBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(SeamBlockBuilder) - Method in interface nxopen.features.shipdesign.SeamBlockBuilderList
-
Appends an object to the list
License requirements: None.
- append(SectionViewBuilder[]) - Method in interface nxopen.features.shipdesign.SectionViewBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(SectionViewBuilder) - Method in interface nxopen.features.shipdesign.SectionViewBuilderList
-
Appends an object to the list
License requirements: None.
- append(ShipNamesBuilder[]) - Method in interface nxopen.features.shipdesign.ShipNamesBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(ShipNamesBuilder) - Method in interface nxopen.features.shipdesign.ShipNamesBuilderList
-
Appends an object to the list
License requirements: None.
- append(StandardPartItemBuilder[]) - Method in interface nxopen.features.shipdesign.StandardPartItemBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(StandardPartItemBuilder) - Method in interface nxopen.features.shipdesign.StandardPartItemBuilderList
-
Appends an object to the list
License requirements: None.
- append(SteelInsulationBoundaryBuilder[]) - Method in interface nxopen.features.shipdesign.SteelInsulationBoundaryBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(SteelInsulationBoundaryBuilder) - Method in interface nxopen.features.shipdesign.SteelInsulationBoundaryBuilderList
-
Appends an object to the list
License requirements: None.
- append(SubSystemBuilder[]) - Method in interface nxopen.features.shipdesign.SubSystemBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(SubSystemBuilder) - Method in interface nxopen.features.shipdesign.SubSystemBuilderList
-
Appends an object to the list
License requirements: None.
- append(TransFrameListItemBuilder[]) - Method in interface nxopen.features.shipdesign.TransFrameListItemBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(TransFrameListItemBuilder) - Method in interface nxopen.features.shipdesign.TransFrameListItemBuilderList
-
Appends an object to the list
License requirements: None.
- append(SmoothRangeBuilder[]) - Method in interface nxopen.features.SmoothRangeBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(SmoothRangeBuilder) - Method in interface nxopen.features.SmoothRangeBuilderList
-
Appends an object to the list
License requirements: None.
- append(CageSectionData[]) - Method in interface nxopen.features.subdivision.CageSectionDataList
-
Appends a set of objects to the list
License requirements: None.
- append(CageSectionData) - Method in interface nxopen.features.subdivision.CageSectionDataList
-
Appends an object to the list
License requirements: None.
- append(VariableRadiusPointsBuilder[]) - Method in interface nxopen.features.VariableRadiusPointsBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(VariableRadiusPointsBuilder) - Method in interface nxopen.features.VariableRadiusPointsBuilderList
-
Appends an object to the list
License requirements: None.
- append(CloseRangeCameraListItemBuilder[]) - Method in interface nxopen.features.vehicledesign.CloseRangeCameraListItemBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(CloseRangeCameraListItemBuilder) - Method in interface nxopen.features.vehicledesign.CloseRangeCameraListItemBuilderList
-
Appends an object to the list
License requirements: None.
- append(CloseRangeDemoCylinderListItemBuilder[]) - Method in interface nxopen.features.vehicledesign.CloseRangeDemoCylinderListItemBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(CloseRangeDemoCylinderListItemBuilder) - Method in interface nxopen.features.vehicledesign.CloseRangeDemoCylinderListItemBuilderList
-
Appends an object to the list
License requirements: None.
- APPEND - Static variable in class nxopen.fields.FieldTable.LoadFileOption
-
Append data to the table removing duplicates
- append(PathObjects[]) - Method in interface nxopen.fields.PathObjectsList
-
Appends a set of objects to the list
License requirements: None.
- append(PathObjects) - Method in interface nxopen.fields.PathObjectsList
-
Appends an object to the list
License requirements: None.
- append(BlendSetbackBuilder[]) - Method in interface nxopen.geometricutilities.BlendSetbackBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(BlendSetbackBuilder) - Method in interface nxopen.geometricutilities.BlendSetbackBuilderList
-
Appends an object to the list
License requirements: None.
- append(BoundaryDefinitionBuilder[]) - Method in interface nxopen.geometricutilities.BoundaryDefinitionBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(BoundaryDefinitionBuilder) - Method in interface nxopen.geometricutilities.BoundaryDefinitionBuilderList
-
Appends an object to the list
License requirements: None.
- append(BoundingObjectBuilder[]) - Method in interface nxopen.geometricutilities.BoundingObjectBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(BoundingObjectBuilder) - Method in interface nxopen.geometricutilities.BoundingObjectBuilderList
-
Appends an object to the list
License requirements: None.
- append(EntityUsageInfo[]) - Method in interface nxopen.geometricutilities.EntityUsageInfoList
-
Appends a set of objects to the list
License requirements: None.
- append(EntityUsageInfo) - Method in interface nxopen.geometricutilities.EntityUsageInfoList
-
Appends an object to the list
License requirements: None.
- append(FaceSetOffset[]) - Method in interface nxopen.geometricutilities.FaceSetOffsetList
-
Appends a set of objects to the list
License requirements: None.
- append(FaceSetOffset) - Method in interface nxopen.geometricutilities.FaceSetOffsetList
-
Appends an object to the list
License requirements: None.
- append(FtmFixedCurvesBuilder[]) - Method in interface nxopen.geometricutilities.FtmFixedCurvesBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(FtmFixedCurvesBuilder) - Method in interface nxopen.geometricutilities.FtmFixedCurvesBuilderList
-
Appends an object to the list
License requirements: None.
- append(FtmTransformCurvesBuilder[]) - Method in interface nxopen.geometricutilities.FtmTransformCurvesBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(FtmTransformCurvesBuilder) - Method in interface nxopen.geometricutilities.FtmTransformCurvesBuilderList
-
Appends an object to the list
License requirements: None.
- append(FtmTransformPointsBuilder[]) - Method in interface nxopen.geometricutilities.FtmTransformPointsBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(FtmTransformPointsBuilder) - Method in interface nxopen.geometricutilities.FtmTransformPointsBuilderList
-
Appends an object to the list
License requirements: None.
- append(InstanceEditedExpressionItem[]) - Method in interface nxopen.geometricutilities.InstanceEditedExpressionItemList
-
Appends a set of objects to the list
License requirements: None.
- append(InstanceEditedExpressionItem) - Method in interface nxopen.geometricutilities.InstanceEditedExpressionItemList
-
Appends an object to the list
License requirements: None.
- append(ParentEquivalencyMap[]) - Method in interface nxopen.geometricutilities.ParentEquivalencyMapList
-
Appends a set of objects to the list
License requirements: None.
- append(ParentEquivalencyMap) - Method in interface nxopen.geometricutilities.ParentEquivalencyMapList
-
Appends an object to the list
License requirements: None.
- append(PatternIncrementItem[]) - Method in interface nxopen.geometricutilities.PatternIncrementItemList
-
Appends a set of objects to the list
License requirements: None.
- append(PatternIncrementItem) - Method in interface nxopen.geometricutilities.PatternIncrementItemList
-
Appends an object to the list
License requirements: None.
- append(PatternSpacingsListItem[]) - Method in interface nxopen.geometricutilities.PatternSpacingsListItemList
-
Appends a set of objects to the list
License requirements: None.
- append(PatternSpacingsListItem) - Method in interface nxopen.geometricutilities.PatternSpacingsListItemList
-
Appends an object to the list
License requirements: None.
- append(ReduceSurfaceRadiusFaceGroupBuilder[]) - Method in interface nxopen.geometricutilities.ReduceSurfaceRadiusFaceGroupBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(ReduceSurfaceRadiusFaceGroupBuilder) - Method in interface nxopen.geometricutilities.ReduceSurfaceRadiusFaceGroupBuilderList
-
Appends an object to the list
License requirements: None.
- append(RotationSetBuilder[]) - Method in interface nxopen.geometricutilities.RotationSetBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(RotationSetBuilder) - Method in interface nxopen.geometricutilities.RotationSetBuilderList
-
Appends an object to the list
License requirements: None.
- append(ScalingSetBuilder[]) - Method in interface nxopen.geometricutilities.ScalingSetBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(ScalingSetBuilder) - Method in interface nxopen.geometricutilities.ScalingSetBuilderList
-
Appends an object to the list
License requirements: None.
- append(SelectionList[]) - Method in interface nxopen.geometricutilities.SelectionListList
-
Appends a set of objects to the list
License requirements: None.
- append(SelectionList) - Method in interface nxopen.geometricutilities.SelectionListList
-
Appends an object to the list
License requirements: None.
- append(SpinePlaneBuilder[]) - Method in interface nxopen.geometricutilities.SpinePlaneBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(SpinePlaneBuilder) - Method in interface nxopen.geometricutilities.SpinePlaneBuilderList
-
Appends an object to the list
License requirements: None.
- append(StyledSweepDoubleOnPathDimBuilder[]) - Method in interface nxopen.geometricutilities.StyledSweepDoubleOnPathDimBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(StyledSweepDoubleOnPathDimBuilder) - Method in interface nxopen.geometricutilities.StyledSweepDoubleOnPathDimBuilderList
-
Appends an object to the list
License requirements: None.
- append(TransitionCurveBuilder[]) - Method in interface nxopen.geometricutilities.TransitionCurveBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(TransitionCurveBuilder) - Method in interface nxopen.geometricutilities.TransitionCurveBuilderList
-
Appends an object to the list
License requirements: None.
- append(TransitionLawNodeBuilder[]) - Method in interface nxopen.geometricutilities.TransitionLawNodeBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(TransitionLawNodeBuilder) - Method in interface nxopen.geometricutilities.TransitionLawNodeBuilderList
-
Appends an object to the list
License requirements: None.
- append(TrimCurveBoundingObjectBuilder[]) - Method in interface nxopen.geometricutilities.TrimCurveBoundingObjectBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(TrimCurveBoundingObjectBuilder) - Method in interface nxopen.geometricutilities.TrimCurveBoundingObjectBuilderList
-
Appends an object to the list
License requirements: None.
- append(TwoExpressionsCollectorSet[]) - Method in interface nxopen.geometricutilities.TwoExpressionsCollectorSetList
-
Appends a set of objects to the list
License requirements: None.
- append(TwoExpressionsCollectorSet) - Method in interface nxopen.geometricutilities.TwoExpressionsCollectorSetList
-
Appends an object to the list
License requirements: None.
- append(TwoExpressionsSectionSet[]) - Method in interface nxopen.geometricutilities.TwoExpressionsSectionSetList
-
Appends a set of objects to the list
License requirements: None.
- append(TwoExpressionsSectionSet) - Method in interface nxopen.geometricutilities.TwoExpressionsSectionSetList
-
Appends an object to the list
License requirements: None.
- append(ListCreator[]) - Method in interface nxopen.ListCreatorList
-
Appends a set of objects to the list
License requirements: None.
- append(ListCreator) - Method in interface nxopen.ListCreatorList
-
Appends an object to the list
License requirements: None.
- append(PathTransitionBuilder[]) - Method in interface nxopen.mechanicalrouting.PathTransitionBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(PathTransitionBuilder) - Method in interface nxopen.mechanicalrouting.PathTransitionBuilderList
-
Appends an object to the list
License requirements: None.
- append(ExternalConnectionElementBuilder[]) - Method in interface nxopen.mechatronics.ExternalConnectionElementBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(ExternalConnectionElementBuilder) - Method in interface nxopen.mechatronics.ExternalConnectionElementBuilderList
-
Appends an object to the list
License requirements: None.
- append(GanttOperationConditionBuilder[]) - Method in interface nxopen.mechatronics.GanttOperationConditionBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(GanttOperationConditionBuilder) - Method in interface nxopen.mechatronics.GanttOperationConditionBuilderList
-
Appends an object to the list
License requirements: None.
- append(GanttOperationParameterBuilder[]) - Method in interface nxopen.mechatronics.GanttOperationParameterBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(GanttOperationParameterBuilder) - Method in interface nxopen.mechatronics.GanttOperationParameterBuilderList
-
Appends an object to the list
License requirements: None.
- append(MATLABSignalConnectionBuilder[]) - Method in interface nxopen.mechatronics.MATLABSignalConnectionBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(MATLABSignalConnectionBuilder) - Method in interface nxopen.mechatronics.MATLABSignalConnectionBuilderList
-
Appends an object to the list
License requirements: None.
- append(PathConstraintFrameBuilder[]) - Method in interface nxopen.mechatronics.PathConstraintFrameBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(PathConstraintFrameBuilder) - Method in interface nxopen.mechatronics.PathConstraintFrameBuilderList
-
Appends an object to the list
License requirements: None.
- append(ProxyObjectParameterBuilder[]) - Method in interface nxopen.mechatronics.ProxyObjectParameterBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(ProxyObjectParameterBuilder) - Method in interface nxopen.mechatronics.ProxyObjectParameterBuilderList
-
Appends an object to the list
License requirements: None.
- append(RuntimeFormulaParameterBuilder[]) - Method in interface nxopen.mechatronics.RuntimeFormulaParameterBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(RuntimeFormulaParameterBuilder) - Method in interface nxopen.mechatronics.RuntimeFormulaParameterBuilderList
-
Appends an object to the list
License requirements: None.
- append(SensorsActuatorsListBuilder[]) - Method in interface nxopen.mechatronics.SensorsActuatorsListBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(SensorsActuatorsListBuilder) - Method in interface nxopen.mechatronics.SensorsActuatorsListBuilderList
-
Appends an object to the list
License requirements: None.
- append(SHMSignalConnectionBuilder[]) - Method in interface nxopen.mechatronics.SHMSignalConnectionBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(SHMSignalConnectionBuilder) - Method in interface nxopen.mechatronics.SHMSignalConnectionBuilderList
-
Appends an object to the list
License requirements: None.
- append(SignalConnectionBuilder[]) - Method in interface nxopen.mechatronics.SignalConnectionBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(SignalConnectionBuilder) - Method in interface nxopen.mechatronics.SignalConnectionBuilderList
-
Appends an object to the list
License requirements: None.
- append(SignalMappingConnectionBuilder[]) - Method in interface nxopen.mechatronics.SignalMappingConnectionBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(SignalMappingConnectionBuilder) - Method in interface nxopen.mechatronics.SignalMappingConnectionBuilderList
-
Appends an object to the list
License requirements: None.
- append(ModelingView[]) - Method in interface nxopen.ModelingViewList
-
Appends a set of objects to the list
License requirements: None.
- append(ModelingView) - Method in interface nxopen.ModelingViewList
-
Appends an object to the list
License requirements: None.
- append(ConfigurationParameter[]) - Method in interface nxopen.motion.ConfigurationParameterList
-
Appends a set of objects to the list
License requirements: None.
- append(ConfigurationParameter) - Method in interface nxopen.motion.ConfigurationParameterList
-
Appends an object to the list
License requirements: None.
- append(ControlInputPortBuilder[]) - Method in interface nxopen.motion.ControlInputPortBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(ControlInputPortBuilder) - Method in interface nxopen.motion.ControlInputPortBuilderList
-
Appends an object to the list
License requirements: None.
- append(InputPortAssociation[]) - Method in interface nxopen.motion.InputPortAssociationList
-
Appends a set of objects to the list
License requirements: None.
- append(InputPortAssociation) - Method in interface nxopen.motion.InputPortAssociationList
-
Appends an object to the list
License requirements: None.
- append(OutputPortAssociation[]) - Method in interface nxopen.motion.OutputPortAssociationList
-
Appends a set of objects to the list
License requirements: None.
- append(OutputPortAssociation) - Method in interface nxopen.motion.OutputPortAssociationList
-
Appends an object to the list
License requirements: None.
- append(PortVariable[]) - Method in interface nxopen.motion.PortVariableList
-
Appends a set of objects to the list
License requirements: None.
- append(PortVariable) - Method in interface nxopen.motion.PortVariableList
-
Appends an object to the list
License requirements: None.
- append(SegmentBuilder[]) - Method in interface nxopen.motion.SegmentBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(SegmentBuilder) - Method in interface nxopen.motion.SegmentBuilderList
-
Appends an object to the list
License requirements: None.
- append(SignalChartListItem[]) - Method in interface nxopen.motion.SignalChartListItemList
-
Appends a set of objects to the list
License requirements: None.
- append(SignalChartListItem) - Method in interface nxopen.motion.SignalChartListItemList
-
Appends an object to the list
License requirements: None.
- append(NXObject[]) - Method in interface nxopen.NXObjectList
-
Appends a set of objects to the list
License requirements: None.
- append(NXObject) - Method in interface nxopen.NXObjectList
-
Appends an object to the list
License requirements: None.
- append(TaggedObject[]) - Method in interface nxopen.ObjectList
-
Appends a set of objects to the list
License requirements: None.
- append(TaggedObject) - Method in interface nxopen.ObjectList
-
Appends an object to the list
License requirements: None.
- append(DatabaseObjects[]) - Method in interface nxopen.pdm.DatabaseObjects
-
- append(Plane[]) - Method in interface nxopen.PlaneList
-
Appends a set of objects to the list
License requirements: None.
- append(Plane) - Method in interface nxopen.PlaneList
-
Appends an object to the list
License requirements: None.
- append(Point[]) - Method in interface nxopen.PointList
-
Appends a set of objects to the list
License requirements: None.
- append(Point) - Method in interface nxopen.PointList
-
Appends an object to the list
License requirements: None.
- append(HydraulicLifterBuilder[]) - Method in interface nxopen.presslinesimulation.HydraulicLifterBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(HydraulicLifterBuilder) - Method in interface nxopen.presslinesimulation.HydraulicLifterBuilderList
-
Appends an object to the list
License requirements: None.
- append(LinearCamBuilder[]) - Method in interface nxopen.presslinesimulation.LinearCamBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(LinearCamBuilder) - Method in interface nxopen.presslinesimulation.LinearCamBuilderList
-
Appends an object to the list
License requirements: None.
- append(MachineAdjustmentBuilder[]) - Method in interface nxopen.presslinesimulation.MachineAdjustmentBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(MachineAdjustmentBuilder) - Method in interface nxopen.presslinesimulation.MachineAdjustmentBuilderList
-
Appends an object to the list
License requirements: None.
- append(MountPointBuilder[]) - Method in interface nxopen.presslinesimulation.MountPointBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(MountPointBuilder) - Method in interface nxopen.presslinesimulation.MountPointBuilderList
-
Appends an object to the list
License requirements: None.
- append(RotaryCamBuilder[]) - Method in interface nxopen.presslinesimulation.RotaryCamBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(RotaryCamBuilder) - Method in interface nxopen.presslinesimulation.RotaryCamBuilderList
-
Appends an object to the list
License requirements: None.
- append(UserMotionBuilder[]) - Method in interface nxopen.presslinesimulation.UserMotionBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(UserMotionBuilder) - Method in interface nxopen.presslinesimulation.UserMotionBuilderList
-
Appends an object to the list
License requirements: None.
- APPEND - Static variable in class nxopen.PrintPDFBuilder.ActionOption
-
Append to existing PDF document
- append() - Method in interface nxopen.PrintPDFBuilder
-
Returns the Append option.
- append(RegionPoint[]) - Method in interface nxopen.RegionPointList
-
Appends a set of objects to the list
License requirements: None.
- append(RegionPoint) - Method in interface nxopen.RegionPointList
-
Appends an object to the list
License requirements: None.
- APPEND - Static variable in class nxopen.routing.RouteManager.ImportMode
-
Create the imported objects as new objects.
- append(RunItemsBuilder[]) - Method in interface nxopen.routing.RunItemsBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(RunItemsBuilder) - Method in interface nxopen.routing.RunItemsBuilderList
-
Appends an object to the list
License requirements: None.
- append(ScCollector[]) - Method in interface nxopen.ScCollectorList
-
Appends a set of objects to the list
License requirements: None.
- append(ScCollector) - Method in interface nxopen.ScCollectorList
-
Appends an object to the list
License requirements: None.
- append(Section[]) - Method in interface nxopen.SectionList
-
Appends a set of objects to the list
License requirements: None.
- append(Section) - Method in interface nxopen.SectionList
-
Appends an object to the list
License requirements: None.
- append(KinematicChain[]) - Method in interface nxopen.sim.KinematicChainList
-
Appends a set of objects to the list
License requirements: None.
- append(KinematicChain) - Method in interface nxopen.sim.KinematicChainList
-
Appends an object to the list
License requirements: None.
- append(KinematicChannelBuilder[]) - Method in interface nxopen.sim.KinematicChannelBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(KinematicChannelBuilder) - Method in interface nxopen.sim.KinematicChannelBuilderList
-
Appends an object to the list
License requirements: None.
- append(KinematicJunctionBuilder[]) - Method in interface nxopen.sim.KinematicJunctionBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(KinematicJunctionBuilder) - Method in interface nxopen.sim.KinematicJunctionBuilderList
-
Appends an object to the list
License requirements: None.
- append(TaggedObject[]) - Method in interface nxopen.TaggedObjectList
-
Appends a set of objects to the list
License requirements: None.
- append(TaggedObject) - Method in interface nxopen.TaggedObjectList
-
Appends an object to the list
License requirements: None.
- append(SelectReuseLibraryListItemBuilder[]) - Method in interface nxopen.tooling.SelectReuseLibraryListItemBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(SelectReuseLibraryListItemBuilder) - Method in interface nxopen.tooling.SelectReuseLibraryListItemBuilderList
-
Appends an object to the list
License requirements: None.
- append(ShimInnerProfileSetBuilder[]) - Method in interface nxopen.tooling.ShimInnerProfileSetBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(ShimInnerProfileSetBuilder) - Method in interface nxopen.tooling.ShimInnerProfileSetBuilderList
-
Appends an object to the list
License requirements: None.
- append(Tag, Tag) - Method in interface nxopen.uf.UFDirpath
-
- append(String[]) - Method in interface nxopen.uistyler.MultiSelectList
-
Appends one or more entries to be inserted into the list
License requirements: None.
- append(String[]) - Method in interface nxopen.uistyler.SelectionBox
-
Appends one or more entries to be inserted into the list
License requirements: None.
- append(String[]) - Method in interface nxopen.uistyler.SingleSelectList
-
Appends one or more entries to be inserted into the list
License requirements: None.
- append(JointItemBuilder[]) - Method in interface nxopen.weld.JointItemBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(JointItemBuilder) - Method in interface nxopen.weld.JointItemBuilderList
-
Appends an object to the list
License requirements: None.
- append(JointmarkFaceSetsBuilder[]) - Method in interface nxopen.weld.JointmarkFaceSetsBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(JointmarkFaceSetsBuilder) - Method in interface nxopen.weld.JointmarkFaceSetsBuilderList
-
Appends an object to the list
License requirements: None.
- append(JointmarkGuideBuilder[]) - Method in interface nxopen.weld.JointmarkGuideBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(JointmarkGuideBuilder) - Method in interface nxopen.weld.JointmarkGuideBuilderList
-
Appends an object to the list
License requirements: None.
- append(JointmarkPointsBuilder[]) - Method in interface nxopen.weld.JointmarkPointsBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(JointmarkPointsBuilder) - Method in interface nxopen.weld.JointmarkPointsBuilderList
-
Appends an object to the list
License requirements: None.
- append(WeldBeadPathBuilder[]) - Method in interface nxopen.weld.WeldBeadPathBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(WeldBeadPathBuilder) - Method in interface nxopen.weld.WeldBeadPathBuilderList
-
Appends an object to the list
License requirements: None.
- append(WeldBeadSizeBuilder[]) - Method in interface nxopen.weld.WeldBeadSizeBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(WeldBeadSizeBuilder) - Method in interface nxopen.weld.WeldBeadSizeBuilderList
-
Appends an object to the list
License requirements: None.
- append(WeldFillStripBuilder[]) - Method in interface nxopen.weld.WeldFillStripBuilderList
-
Appends a set of objects to the list
License requirements: None.
- append(WeldFillStripBuilder) - Method in interface nxopen.weld.WeldFillStripBuilderList
-
Appends an object to the list
License requirements: None.
- APPEND_MODEL - Static variable in class nxopen.cae.SolverAppendOption.ImportBehaviorOption
-
- APPEND_NEW - Static variable in class nxopen.cae.SolverAppendOption.MergeOption
-
- APPEND_STRING - Static variable in class nxopen.uf.UFClone.NameRuleType
-
- appendBndFromCurve(Tag, UFCam.GeomType, int, Tag[], UFCambnd.BoundaryData, UFCambnd.AppData[]) - Method in interface nxopen.uf.UFCambnd
-
- appendBndFromFace(Tag, UFCam.GeomType, Tag, UFCambnd.BoundaryData) - Method in interface nxopen.uf.UFCambnd
-
- appendCheckerNode(String) - Method in interface nxopen.validate.Validator
-
Adds a checker node.
- appendCheckerNodes(String[]) - Method in interface nxopen.validate.Validator
-
Adds checker nodes.
- appendCircularMotion(PathCircularMotion) - Method in interface nxopen.cam.Path
-
Append a circular move
License requirements: None.
- appendCurves(NXObject[], Point3d, Matrix3x3) - Method in interface nxopen.cam.BoundarySet
-
Add curves to the boundary
License requirements: cam_base ("CAM BASE")
.
- appendCustomPoints(Tag, UFCamgeom.CustomPointType, int, UFCamgeom.CustomPoint[]) - Method in interface nxopen.uf.UFCamgeom
-
- appended - Variable in class nxopen.annotations.CharacterSpaceFactor
-
Standard Font Character Space Factor for Appended Text
- APPENDED_ABOVE - Static variable in class nxopen.annotations.TextComponent.TextType
-
appended text above
- APPENDED_AFTER - Static variable in class nxopen.annotations.TextComponent.TextType
-
appended text after
- APPENDED_BEFORE - Static variable in class nxopen.annotations.TextComponent.TextType
-
appended text before
- APPENDED_BELOW - Static variable in class nxopen.annotations.TextComponent.TextType
-
appended text below
- APPENDED_TEXT_ABOVE - Static variable in class nxopen.uf.UFDrf.AppendedTextLocation
-
- APPENDED_TEXT_AFTER - Static variable in class nxopen.uf.UFDrf.AppendedTextLocation
-
- APPENDED_TEXT_BEFORE - Static variable in class nxopen.uf.UFDrf.AppendedTextLocation
-
- APPENDED_TEXT_BELOW - Static variable in class nxopen.uf.UFDrf.AppendedTextLocation
-
- appendedNxTextCharacterSpaceFactor() - Method in interface nxopen.annotations.LetteringStyleBuilder
-
Returns the appended NX text character space factor.
- appendedStandardTextCharacterSpaceFactor() - Method in interface nxopen.annotations.LetteringStyleBuilder
-
Returns the appended Standard text character space factor.
- AppendedText - Interface in nxopen.annotations
-
Represents Appended text .
- appendedText() - Method in interface nxopen.annotations.BaseAngularDimensionBuilder
-
Returns the appended text
License requirements: None.
- appendedText() - Method in interface nxopen.annotations.BaseChamferDimensionBuilder
-
Returns the appended text
License requirements: None.
- appendedText() - Method in interface nxopen.annotations.BaseCurveLengthDimensionBuilder
-
Returns the appended text
License requirements: None.
- appendedText() - Method in interface nxopen.annotations.BaseLinearDimensionBuilder
-
Returns the appended text
License requirements: None.
- appendedText() - Method in interface nxopen.annotations.BaseOrdinateDimensionBuilder
-
Returns the appended text
License requirements: None.
- appendedText() - Method in interface nxopen.annotations.BaseRadialDimensionBuilder
-
Returns the appended text
License requirements: None.
- appendedText() - Method in interface nxopen.annotations.BaseRapidDimensionBuilder
-
Returns the appended text
License requirements: None.
- appendedText() - Method in interface nxopen.annotations.BaseThicknessDimensionBuilder
-
Returns the appended text
License requirements: None.
- appendedText() - Method in interface nxopen.annotations.ShipDimensionBuilder
-
Returns the appended text
License requirements: None.
- AppendedText() - Constructor for class nxopen.uf.UFDrf.AppendedText
-
- AppendedText(UFDrf.AppendedTextLocation, int, String[]) - Constructor for class nxopen.uf.UFDrf.AppendedText
-
- appendedText - Variable in class nxopen.uf.UFDrf.AskAppendedTextData
-
- appendedText - Variable in class nxopen.uf.UFDrf.LetteringPreferences
-
- appendedText - Variable in class nxopen.uf.UFDrf.Text
-
- appendedText - Variable in class nxopen.uf.UFGdt.AskAppendedTextData
-
- appendedTextAspectRatio() - Method in interface nxopen.annotations.LetteringStyleBuilder
-
Returns the appended text aspect ratio.
- AppendedTextBuilder - Interface in nxopen.annotations
-
This class is used to set/access the appended text of a dimension
This is a sub-builder class and cannot be directly instantiated
.
- appendedTextBuilder() - Method in interface nxopen.annotations.AppendedTextEditorBuilder
-
Returns the appended text builder
License requirements: None.
- appendedTextCharSpaceFactor() - Method in interface nxopen.annotations.LetteringStyleBuilder
-
Returns the appended text character space factor.
- appendedTextColor() - Method in interface nxopen.annotations.LetteringStyleBuilder
-
Returns the appended text color
License requirements: None.
- AppendedTextEditorBuilder - Interface in nxopen.annotations
-
- appendedTextFont() - Method in interface nxopen.annotations.LetteringStyleBuilder
-
Returns the appended text font
License requirements: None.
- appendedTextItalicized() - Method in interface nxopen.annotations.LetteringStyleBuilder
-
Returns the appended text italic status
License requirements: None.
- appendedTextLineSpaceFactor() - Method in interface nxopen.annotations.LetteringStyleBuilder
-
Returns the appended text line space factor
License requirements: None.
- appendedTextLineWidth() - Method in interface nxopen.annotations.LetteringStyleBuilder
-
Returns the appended text line width.
- appendedTextSize() - Method in interface nxopen.annotations.LetteringStyleBuilder
-
Returns the appended text character size
License requirements: None.
- appendedTextSpaceFactor() - Method in interface nxopen.annotations.LetteringStyleBuilder
-
Returns the appended text space factor.
- appendedTextSymbolAspectRatio() - Method in interface nxopen.annotations.LetteringStyleBuilder
-
Returns the symbol aspect ratio for appended text (only available for symbols
when using standard font).
- appendedTextTags - Variable in class nxopen.uf.UFGdt.AnnotationTags
-
- appendExternalPoints(NXObject[]) - Method in interface nxopen.cam.InspectionMeasDataBuilder
-
Add external points to measured data
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- appendFaceBoundary(TaggedObject, boolean, boolean, boolean, BoundarySet.ToolSideTypes) - Method in interface nxopen.cam.Boundary
-
Append the face boundary
License requirements: cam_base ("CAM BASE")
.
- appendFaceBoundary(TaggedObject, boolean, boolean, boolean, BoundarySet.ToolSideTypes, int, int) - Method in interface nxopen.cam.BoundaryPlanarMill
-
Append the face boundary
License requirements: cam_base ("CAM BASE")
.
- appendFemodel(FEModel, FEModel.IdSpecificationObject) - Method in interface nxopen.cae.FEModel
-
This method appends finite element model data from a source fem
License requirements: nx_masterfem ("Finite Element Modeling")
.
- appendFormat(NXObject[], String[], String) - Method in interface nxopen.diagramming.FormattedStringBuilder
-
Appends the format and related referenced attributes to this builder.
- appendFromDirs(Tag, int, String[]) - Method in interface nxopen.uf.UFDirpath
-
- appendFromEnv(Tag, String) - Method in interface nxopen.uf.UFDirpath
-
- appendGeometrySet(GeometrySet, DisplayableObject[]) - Method in interface nxopen.cam.Geometry
-
Append an geometry set with dumb rules
License requirements: cam_base ("CAM BASE")
.
- appendHelixMotion(PathHelixMotion) - Method in interface nxopen.cam.Path
-
Append a helical move
License requirements: None.
- appendItems(Tag, UFCam.GeomType, int, Tag[], UFCamgeom.AppData[]) - Method in interface nxopen.uf.UFCamgeom
-
- appendItems(Tag, int, Tag[]) - Method in interface nxopen.uf.UFCamtext
-
- appendItemUde(UFVariant, int, UFCambnd.UdeSetType, String) - Method in interface nxopen.uf.UFCambndWedm
-
- AppendItemUdeData() - Constructor for class nxopen.uf.UFCambndWedm.AppendItemUdeData
-
- appendLevelMarker(PathLevelMarker) - Method in interface nxopen.cam.Path
-
Append a level marker
License requirements: None.
- appendLinearMotion(PathLinearMotion) - Method in interface nxopen.cam.Path
-
Append a linear move
License requirements: None.
- appendMethod() - Method in interface nxopen.cae.CompanionResultBuilder
-
Returns the append method indicate how the companion results data will be presented
License requirements: None.
- appendMove(Move) - Method in interface nxopen.cam.Operation
-
Returns the append move
License requirements: cam_base ("CAM BASE")
.
- appendNamedGeometry(ScCollector[]) - Method in interface nxopen.cam.Geometry
-
Append named geometry
License requirements: cam_base ("CAM BASE")
.
- appendOneBoundaryBody(Body, boolean) - Method in interface nxopen.geometricutilities.RegionTracker
-
Append one new region boundary body to the region tracker
License requirements: solid_modeling ("SOLIDS MODELING")
.
- appendOneRegionTracker() - Method in interface nxopen.geometricutilities.BooleanRegionSelect
-
Create empty region tracker object and register it on the boolean region select builder
License requirements: solid_modeling ("SOLIDS MODELING")
.
- appendOutputTrackingData(TrackingData[]) - Method in interface nxopen.features.CustomFeatureCreateFeatureGeometryEvent
-
Adds the tracking data for a feature
License requirements: solid_modeling ("SOLIDS MODELING")
.
- appendOutputTrackingData(TrackingData[]) - Method in interface nxopen.features.CustomFeatureModifyFeatureGeometryEvent
-
Appends the tracking data for a custom feature
License requirements: solid_modeling ("SOLIDS MODELING")
.
- appendPartNode(String) - Method in interface nxopen.validate.Validator
-
Adds part node by part file name
License requirements: None.
- appendPartNode(Part) - Method in interface nxopen.validate.Validator
-
Adds part node by part object
License requirements: None.
- appendPartNodes(String[]) - Method in interface nxopen.validate.Validator
-
Adds part nodes by part file names
License requirements: None.
- appendPartNodes(Part[]) - Method in interface nxopen.validate.Validator
-
Adds part nodes by part objects
License requirements: None.
- appendPlane(Point3d, Point3d, Point3d, Vector3d) - Method in interface nxopen.geometricutilities.InteractiveSectionBuilder
-
Appends a plane
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- appendPoint(Point3d, boolean) - Method in interface nxopen.geometricutilities.BoundaryDefinitionBuilder
-
Appends a point to the boundary definition
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- appendPoints(boolean, Curve) - Method in interface nxopen.weld.JointmarkBuilder
-
Creates a list of points on the overlap sheet.
- appendPointsOverride(boolean) - Method in interface nxopen.weld.PointMarkBuilder
-
Creates a list of points on the overlap sheet.
- appendRefset() - Method in interface nxopen.JtCreator
-
Returns the appendRefset * - Specifies whether name of the reference set should be appended to the name of component node in JT product structure
License requirements: None.
- appendRow(int, SpreadsheetCellData[]) - Method in interface nxopen.SpreadsheetExternal
-
Appends a new row of data to the Excel file.
- appendSearchResultElementToSelectedList(String) - Method in interface nxopen.assemblies.MechanicalRoutingSubsetBuilder
-
- appendSubopMove(Move) - Method in interface nxopen.cam.InspectionOperation
-
Appends a move subop
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- appendUde(String) - Method in interface nxopen.cam.Path
-
Append an ude of name with default values
License requirements: None.
- appendUde(Tag, UFUde.SetType, String) - Method in interface nxopen.uf.UFParam
-
- application() - Method in interface nxopen.FileNew
-
- application() - Method in interface nxopen.routing.DesignRule
-
- APPLICATION - Static variable in class nxopen.Validation.InputType
-
Input rules are from validation applications
- APPLICATION_BUTTON - Static variable in class nxopen.menubar.MenuButton.Type
-
- ApplicationBuilder - Interface in nxopen.ame
-
- ApplicationContext - Class in nxopen.features.sheetmetal
-
This is the enum representing application context of the feature
- applicationData() - Method in interface nxopen.features.UserDefinedFeatureCopyEvent
-
Returns the application data
License requirements: None.
- applicationData() - Method in interface nxopen.features.UserDefinedFeatureCreateEvent
-
Returns the application data
License requirements: None.
- applicationData() - Method in interface nxopen.features.UserDefinedFeatureUpdateEvent
-
Returns the application data
License requirements: None.
- applicationId() - Method in interface nxopen.menubar.MenuButtonEvent
-
Returns the activated MenuButton's owning application identifier.
- applicationLogging() - Method in interface nxopen.pdm.SessionSettings
-
Returns a flag controlling Teamcenter application logging
License requirements: None.
- ApplicationManager - Interface in nxopen.mfg.am
-
Represents the Additive Manufacturing application
Use the static method in this class to obtain an instance.
- ApplicationManager - Interface in nxopen.presslinesimulation
-
Represents a manager the of press line simulation application builders
To obtain an instance of this class, refer to
Session
Created in NX12.0.0
- ApplicationManagerFactory - Class in nxopen.mfg.am
-
- ApplicationManagerFactory() - Constructor for class nxopen.mfg.am.ApplicationManagerFactory
-
- ApplicationManagerFactory - Class in nxopen.presslinesimulation
-
- ApplicationManagerFactory() - Constructor for class nxopen.presslinesimulation.ApplicationManagerFactory
-
- applicationMethod() - Method in interface nxopen.routing.OverstockBuilder
-
Returns the application method for overstock assignment.
- applicationName() - Method in interface nxopen.FileNew
-
- applicationName() - Method in interface nxopen.mechatronics.ParameterStockBuilder
-
Returns the application name.
- applicationName - Variable in class nxopen.routing.RouteManager.SearchCriteria
-
Optional.
- applicationName() - Method in interface nxopen.Session
-
Returns the name of the current application.
- applicationSwitchImmediate(String) - Method in interface nxopen.Session
-
Registers a request to immediately switch to the specified application and open the corresponding user environment.
- applicationSwitchRequest(String) - Method in interface nxopen.menubar.MenuBarManager
-
- applicationType() - Method in interface nxopen.features.shipdesign.MirrorShipStructureBuilder
-
Returns the application type, which is ship basic design or ship detail design.
- applicationtype() - Method in interface nxopen.motion.ScalarForceBuilder
-
Returns the application type
License requirements: None.
- applicationType() - Method in interface nxopen.motion.ScalarTorqueBuilder
-
Returns the scalar torque application type.
- applicationtype() - Method in interface nxopen.motion.VObject
-
Returns the application type
License requirements: None.
- applicationType() - Method in interface nxopen.preferences.RoutingApplicationView
-
Returns the given routing application type.
- ApplicationUtils - Interface in nxopen.shipdesign
-
Represents Generator which wrap the ship api for china
To obtain an instance of this class, refer to
ShipSession
Created in NX11.0.0
- applicationUtils() - Method in interface nxopen.shipdesign.ShipSession
-
- APPLIED - Static variable in class nxopen.cae.NodalForceReport.ForceComponent
-
- APPLIED - Static variable in class nxopen.cae.NodalForceReportBuilder.Force
-
- APPLIED_FORCE - Static variable in class nxopen.cae.Result.Quantity
-
- APPLIED_MOMENT - Static variable in class nxopen.cae.Result.Quantity
-
- appliedcharx - Variable in class nxopen.routing.PathStockBuilder._specified_stock_with_applied_charxData
-
Applied characteristics for the specified stock.
- appliedToType() - Method in interface nxopen.cam.BoundaryTurnMemberFineFinishCorner
-
Returns the fine_finish_corner applied to
License requirements: None.
- apply() - Method in interface nxopen.blockstyler.BlockDialog.Apply
-
Apply callback
License requirements: None.
- APPLY - Static variable in class nxopen.cae.BeamEADBuilder.State
-
apply the property
- APPLY - Static variable in class nxopen.cae.BushingEADBuilder.State
-
apply the property
- APPLY - Static variable in class nxopen.cae.DamperEADBuilder.State
-
apply the property
- APPLY - Static variable in class nxopen.cae.GapEADBuilder.State
-
apply the property
- APPLY - Static variable in class nxopen.cae.LumpedMassEADBuilder.State
-
apply the property
- APPLY - Static variable in class nxopen.cae.RigidEADBuilder.State
-
apply the property
- APPLY - Static variable in class nxopen.cae.ShellEADBuilder.State
-
apply the property
- APPLY - Static variable in class nxopen.cae.SpringEADBuilder.State
-
apply the property
- apply(DisplayableObject[]) - Method in interface nxopen.DisplayModification
-
Apply this display modification to a set of objects
License requirements: None.
- apply() - Method in interface nxopen.dmu.ISnapshot
-
- apply() - Method in interface nxopen.pdm.PersistentSettings
-
Applies any changes to the settings
License requirements: None.
- apply() - Method in interface nxopen.pdm.SessionSettings
-
Applies any changes to the settings
License requirements: None.
- APPLY - Static variable in class nxopen.Selection.DialogResponse
-
User selected Apply
- apply(StylerEvent) - Method in interface nxopen.uistyler.DialogItem.Apply
-
Called when a dialog user clicks Apply or <Ctrl>MB2 anywhere in NX or presses the Apply's
keyboard accelerator as defined in the resource file.
- APPLY - Static variable in class nxopen.uistyler.DialogItem.DialogItemIndex
-
Apply index
- APPLY - Static variable in class nxopen.uistyler.DialogResponse
-
Apply button was selected.
- APPLY_FIRST_BC - Static variable in class nxopen.cae.ConflictResolutionBuilder.Rule
-
apply first BC on the intersection
- APPLY_FIRST_CONSTRAINT - Static variable in class nxopen.cae.ConstraintResolutionBuilder.Rule
-
Deprecated.
apply first constraint on the intersection
- APPLY_INDEX - Static variable in class nxopen.uistyler.StylerEvent.Miscellaneous
-
Apply index
- APPLY_MINIMUM_RADIUS - Static variable in class nxopen.tooling.ScrapDesignBuilder.EditScrapType
-
Applies minimum radius to sharp corners of scraps
- APPLY_REASON - Static variable in class nxopen.uistyler.StylerEvent.Reason
-
Apply reason
- APPLY_SECOND_BC - Static variable in class nxopen.cae.ConflictResolutionBuilder.Rule
-
apply second BC on the intersection
- APPLY_SECOND_CONSTRAINT - Static variable in class nxopen.cae.ConstraintResolutionBuilder.Rule
-
Deprecated.
apply second constraint on the intersection
- applyActionOffset() - Method in interface nxopen.motion.BushingDefine
-
Returns the flag to specify whether Action Offset should be applied
License requirements: mechanisms ("MECHANISMS")
.
- applyAtBoundary() - Method in interface nxopen.cam.DmBndBuilder
-
Returns the Apply at Boundary
License requirements: None.
- applyAtPartSurface() - Method in interface nxopen.cam.DmBndBuilder
-
Returns the Apply at Part Surface
License requirements: None.
- applyAtStepover() - Method in interface nxopen.cam.UpDownCutting
-
Returns the apply at stepover toggle
License requirements: None.
- applyAttributes(NXObject[]) - Method in interface nxopen.weld.CharacteristicsBuilder
-
Apply the selected attributes to the objects.
- applyAttributesToSelected() - Method in interface nxopen.weld.CharacteristicsBuilder
-
Apply the selected attributes to the objects that were selected.
- applyBaseOffset() - Method in interface nxopen.motion.BushingDefine
-
Returns the flag to specify whether Base Offset should be applied
License requirements: mechanisms ("MECHANISMS")
.
- applyBeamEndMass(String, String, int, Tag[]) - Method in interface nxopen.uf.UFSf
-
- applyCfw() - Method in interface nxopen.annotations.EditSymbolDisplayBuilder
-
Apply color font width
License requirements: drafting ("DRAFTING")
.
- applyColor() - Method in interface nxopen.tooling.ScrapDesignBuilder
-
Returns the toggle to determine whether the color will be used to all other scraps with the same shape
License requirements: None.
- applyConstraintsAndClear() - Method in interface nxopen.routing.PlacementSolutionsBuilder
-
Commit the solution and apply constraints if needed.
- applyConstraintsAndClear(boolean, boolean) - Method in interface nxopen.routing.PlacementSolutionsBuilder
-
Commit the solution and apply constraints if needed.
- applyConstraintsAndClear(boolean, boolean, boolean) - Method in interface nxopen.routing.PlacementSolutionsBuilder
-
Commit the solution and apply constraints if needed.
- applyConstraintsToAll() - Method in interface nxopen.features.PoleSmoothingBuilder
-
Returns the indicator to apply the same constraint to all
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- applyCornersSmoothing() - Method in interface nxopen.cam.NcmSmoothingBuilder
-
Returns the apply corners smoothing check activation
License requirements: None.
- applyCornersSmoothingTransfers() - Method in interface nxopen.cam.NcmSmoothingBuilder
-
Returns the apply corners smoothing check activation
License requirements: None.
- applyCrosshatchToSectionView() - Method in interface nxopen.drawings.ViewSettingsBuilder
-
Returns the apply crosshatch To section view
License requirements: None.
- applyDefaults(UFClone.NamingFailures) - Method in interface nxopen.uf.UFClone
-
- applyDimensions() - Method in interface nxopen.features.RPOBuilder
-
Transforms the feature by applying the positioning dimensions
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING")
.
- applyEdgeSelection() - Method in interface nxopen.cam.GeometrySet
-
Apply Edge Selections
License requirements: cam_base ("CAM BASE")
.
- applyEndCut() - Method in interface nxopen.features.shipdesign.ShipTrimBodyBuilder
-
Returns the indication of whether end cuts should be applied to the profiles.
- applyEndCut() - Method in interface nxopen.features.shipdesign.SplitProfilePlateBuilder
-
Returns the option to indicate whether to apply the end cut to the profiles
License requirements: nx_ship_detail ("Ship Detail Design")
.
- applyEngageSettings() - Method in interface nxopen.cam.TeachmodeProfileMoveBuilder
-
Returns the apply engage settings status
License requirements: None.
- applyFamilyInstance(Tag, int) - Method in interface nxopen.uf.UFPart
-
- applyFilletAt() - Method in interface nxopen.cam.DmBndBuilder
-
Returns the apply fillet
License requirements: None.
- applyFlangeSetback() - Method in interface nxopen.features.shipdesign.StiffenerBuilder
-
Returns the flange set back option for stiffener by support, which indicates if the flange set back should be applied or not
License requirements: None.
- applyFlangeSetback() - Method in interface nxopen.features.shipdesign.StiffenerSystemBuilder
-
Returns the flange set back option for stiffener by support, which indicates if the flange set back should be applied or not
License requirements: None.
- applyGlobalDepthPerCut() - Method in interface nxopen.cam.CutLevel
-
Update the cut levels based on the global depth per cut
License requirements: cam_base ("CAM BASE")
.
- applyLastDistanceChange() - Method in interface nxopen.display.PerspectiveOptionsBuilder
-
Sets the work view to have the camera distance, which is the distance from the camera's
position to the target position in the work view which was specified in the last use of
PerspectiveOptionsBuilder.setCameraDistance(double)
The camera distance has no meaning for an orthographic view, so this method does nothing
if the work view is an orthographic view.
- applyLeadTilt() - Method in interface nxopen.cam.InterpolateVector
-
Returns a boolean value that indicates whether the lead and tilt angles needs to be given more precedence
License requirements: cam_base ("CAM BASE")
.
- applyMarginToInnerBoundToggle() - Method in interface nxopen.geometricutilities.PatternFill
-
Returns the applyMarginToInnerBoundToggle, a logical flag to indicate if we need to apply the margin value to internal bounday.
- applyModelViewOrder(String) - Method in interface nxopen.annotations.PmiManager
-
Applies a saved explicit order
License requirements: geometric_tol ("GDT")
.
- applyMoveToLayerToOwningParts(int, DisplayableObject[]) - Method in interface nxopen.layer.LayerManager
-
Move the selected objects to the specified layer in their Owning Parts.
- applyNamingRule(NXObject) - Method in interface nxopen.ame.AMEManager
-
Apply naming rule
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- applyNamingRule() - Method in interface nxopen.mechatronics.SystemObject
-
Perform naming rule check and update the designation.
- applyOffset() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
Returns the option to specify whether or not the offset will be applied for the envelope.
- applyOn() - Method in interface nxopen.cam.StepoverBuilder
-
Returns the apply on part option
License requirements: None.
- applyOrder(Sketch, String) - Method in interface nxopen.drawings.OrderManager
-
Applies the order matching the specified name
License requirements: nx_layout ("NX Layout")
.
- applyParameterValue(Point, Point[]) - Method in interface nxopen.geometricutilities.CurveShapingBuilder
-
Applies parameter value from a key point to a group of key points without affecting curve shape
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- applyPlacementSolution(PlacementSolution) - Method in interface nxopen.placement.PlacementEngineBuilder
-
Sets the transform on part being placed using the supplied placement solution.
- applyPmi() - Method in interface nxopen.JtCreator
-
Returns the applytoPMI * - Includes only PMI data in the reference set being translated for translation
License requirements: None.
- applyPortRotation(double) - Method in interface nxopen.routing.PlacementSolutionsBuilder
-
Applies a rotation to the component about the axis of the port being used for placement.
- applyPreference() - Method in interface nxopen.cae.PostPreference
-
Apply Preference to all Post Views
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- applyReferenceObjectCharx(NXObject) - Method in interface nxopen.routing.EditCharacteristicsBuilder
-
Apply characteristics of the reference object to the selected objects.
- applyRemoteConstraints() - Method in interface nxopen.SketchAutoConstrainBuilder
-
Returns the apply remote constraints
License requirements: None.
- applyRetractSettings() - Method in interface nxopen.cam.TeachmodeProfileMoveBuilder
-
Returns the apply retract settings status
License requirements: None.
- applySafetyToDirect() - Method in interface nxopen.cam.NcmPlanarBuilder
-
Returns the apply safety to direct value
License requirements: None.
- applySafetyToDirect() - Method in interface nxopen.cam.NcmTransfer
-
Returns the apply safety to direct value
License requirements: None.
- applySegmentEdit(DisplayableObject, NXColor, ViewDependentDisplayManager.Font, ViewDependentDisplayManager.Width, double[], double[]) - Method in interface nxopen.ViewDependentDisplayManager
-
Applies a wireframe edit to specified objects in a view.
- applySegmentEdit(DisplayableObject, ViewDependentDisplayManager.Font, ViewDependentDisplayManager.Width, double[], double[]) - Method in interface nxopen.ViewDependentDisplayManager
-
Applies a wireframe edit to specified objects in a view
when the color is the original color
License requirements: None.
- applySelectiveExportXml(String) - Method in interface nxopen.uf.UFClone
-
- applyShadeEdit(NXColor, ViewDependentDisplayManager.PartialShading, ViewDependentDisplayManager.Translucency, int, DisplayableObject[]) - Method in interface nxopen.ViewDependentDisplayManager
-
Applies a shading edit to specified faces and/or bodies in a view.
- applyShadeEdit(ViewDependentDisplayManager.PartialShading, ViewDependentDisplayManager.Translucency, int, DisplayableObject[]) - Method in interface nxopen.ViewDependentDisplayManager
-
Applies a shading edit to specified faces and/or bodies in a view when
shade color is original color
License requirements: None.
- applySimulationOptions() - Method in interface nxopen.sim.IsvControlPanelBuilder
-
Apply the simulation options
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- applySketchPreferences(int) - Method in interface nxopen.preferences.SketchPreferences
-
Applies sketch preferences set by user.
- applySmartRuleResult(String[], String[]) - Method in interface nxopen.features.shipdesign.StandardPartFrameworkBuilder
-
Applies the smart rule results to the spreadsheet data block.
- applySmoothing() - Method in interface nxopen.cam.ToolAxisVariable
-
Returns the Apply Smoothing
License requirements: None.
- applySolverLanguageExportOptions(CaeDataContainer) - Method in interface nxopen.cae.SimSolution
-
Stores the solver language export options to the specified solution.
- applyStyle() - Method in interface nxopen.annotations.EditSymbolDisplayBuilder
-
Apply text preferences
License requirements: drafting ("DRAFTING")
.
- applyTemplateToAll() - Method in interface nxopen.drafting.DrawingCreationWizardBuilder
-
- applyToAllFaces() - Method in interface nxopen.DisplayModification
-
Returns the apply to all faces flag.
- applyToAllFromSameComp() - Method in interface nxopen.annotations.HatchFillSettingsBuilder
-
Returns the state to set this crosshatch settings to all same component crosshatches.
- applyToAllLevels - Variable in class nxopen.uf.UFAssem.LoadOptions
-
- applyToAllLevels - Variable in class nxopen.uf.UFAssem.Options
-
- applyToAllOccurrences() - Method in interface nxopen.ObjectGeneralPropertiesBuilder
-
Apply name to the instance of the component.
- applyToAllSections() - Method in interface nxopen.annotations.TableSectionStyleBuilder
-
Returns the apply to all sections flag that when set applies settings to all sections
License requirements: None.
- applyToComponent() - Method in interface nxopen.ObjectGeneralPropertiesBuilder
-
Returns the apply to component.
- applyToCopyOfSheets() - Method in interface nxopen.features.TrimSheetBuilder
-
Returns the apply to copy of sheets
License requirements: None.
- applyToLastPass() - Method in interface nxopen.cam.MillCutParameters
-
Returns the status for doing Blank Sensitive finish on the last cut level
License requirements: None.
- applyToModel() - Method in interface nxopen.positioning.Network
-
Applies the current network state to the model.
- applyToOwningParts() - Method in interface nxopen.DisplayModification
-
Returns the flag to apply display changes to Owning Parts.
- applyToView(View) - Method in interface nxopen.annotations.PmiFilter
-
Applies the PMI filter to a view.
- applyToView(ModelingView) - Method in interface nxopen.display.Camera
-
Applies the parameters of a camera to a view
License requirements: None.
- applyToWorkPart() - Method in interface nxopen.FeatureGeneralPropertiesBuilder
-
Returns the option to apply the name change to the work part.
- applyUnits() - Method in interface nxopen.AttributePropertiesBaseBuilder
-
Apply the units currently set on the builder to any objects that have a value set for the
current attribute.
- applyWebSetback() - Method in interface nxopen.features.shipdesign.StiffenerBuilder
-
Returns the web set back option for stiffener by support, which indicates if the web set back should be applied or not
License requirements: None.
- applyWebSetback() - Method in interface nxopen.features.shipdesign.StiffenerSystemBuilder
-
Returns the web set back option for stiffener by support, which indicates if the web set back should be applied or not
License requirements: None.
- applyWireframeEdit(NXColor, ViewDependentDisplayManager.Font, ViewDependentDisplayManager.Width, DisplayableObject[]) - Method in interface nxopen.ViewDependentDisplayManager
-
Applies a wireframe edit to specified objects in a view.
- applyWireframeEdit(ViewDependentDisplayManager.Font, ViewDependentDisplayManager.Width, DisplayableObject[]) - Method in interface nxopen.ViewDependentDisplayManager
-
Applies a wireframe edit to specified objects in a view
when the color is the original color
License requirements: None.
- APPROACH - Static variable in class nxopen.cam.CamOperationMotionType
-
- APPROACH - Static variable in class nxopen.cam.CamPathMotionType
-
- APPROACH - Static variable in class nxopen.cam.MoveBuilder.Motion
-
Approach
- approach() - Method in interface nxopen.cam.PathDisplayColors
-
Returns the color approach
License requirements: None.
- APPROACH_AND_DEPARTURE - Static variable in class nxopen.cam.WedmStatusControlCiBuilder.StatusTypes
-
approach and departure
- APPROACH_ONLY - Static variable in class nxopen.cam.WedmStatusControlCiBuilder.StatusTypes
-
approach only
- APPROACH_OR_DEPATURE - Static variable in class nxopen.cam.TurnAvoidancePathPointsBuilder.FeedrateModesTypes
-
Feed Rate: Direct
- approachClearanceBuilder() - Method in interface nxopen.cam.NcmTransferBuilder
-
Returns the approach clearance builder
License requirements: None.
- approachDirection() - Method in interface nxopen.cam.InspectionCurveFeatureBuilder
-
Returns the approach direction
License requirements: None.
- approachDist() - Method in interface nxopen.cam.InspectionMeasurePointBuilder
-
Returns the builder for approach distance
License requirements: None.
- approachDist() - Method in interface nxopen.cam.InspectionPolarGridBuilder
-
Returns the approach distance
License requirements: None.
- approachDist() - Method in interface nxopen.cam.InspectionScanArcBuilder
-
Returns the builder for approach distance
License requirements: None.
- approachDist() - Method in interface nxopen.cam.InspectionScanCurve5AxisBuilder
-
Returns the builder for approach distance
License requirements: None.
- approachDist() - Method in interface nxopen.cam.InspectionScanCurveBuilder
-
Returns the builder for approach distance
License requirements: None.
- approachDist() - Method in interface nxopen.cam.InspectionScanHelixBuilder
-
Returns the builder for approach distance
License requirements: None.
- approachDist() - Method in interface nxopen.cam.InspectionScanLineBuilder
-
Returns the builder for approach distance
License requirements: None.
- approachDist() - Method in interface nxopen.cam.InspectionUVGridBuilder
-
Returns the approach distance
License requirements: None.
- approachDistance() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns the approach distance
License requirements: None.
- approachDistance() - Method in interface nxopen.cam.InspectionMoveBuilder
-
Returns the approach distance
License requirements: None.
- approachFlag() - Method in interface nxopen.cam.ProbeProtectedParametersBuilder
-
Returns the approach from clearance plane flag
License requirements: None.
- approachHeightBuilder() - Method in interface nxopen.cam.NcmTransferBuilder
-
Returns the approach height builder
License requirements: None.
- approachLengthBuilder() - Method in interface nxopen.cam.NcmTransferBuilder
-
Returns the approach length builder
License requirements: None.
- approachMethod() - Method in interface nxopen.cam.NcmTransferBuilder
-
Returns the approach method
License requirements: None.
- approachPathMode() - Method in interface nxopen.cam.TurnAvoidanceApproachBuilder
-
Returns the approach path mode
License requirements: None.
- approachPathPointsListBuilder() - Method in interface nxopen.cam.TurnAvoidanceApproachBuilder
-
Returns the avoidance path points list builder
License requirements: None.
- approachPostCommands() - Method in interface nxopen.cam.NcmTransferBuilder
-
Returns the approach post commands
License requirements: None.
- approachToolAxis() - Method in interface nxopen.cam.NcmTransferBuilder
-
Returns the approach tool axis
License requirements: None.
- approachToolAxisOption() - Method in interface nxopen.cam.NcmTransferBuilder
-
Returns the tool axis option for approach
License requirements: None.
- approachVector() - Method in interface nxopen.cam.NcmTransferBuilder
-
Returns the approach vector
License requirements: None.
- approveChanges() - Method in interface nxopen.cam.CAMFeature
-
Approve changes on a CAMFeature
License requirements: cam_base ("CAM BASE")
.
- APPROVED - Static variable in class nxopen.cam.CAMObject.Status
-
Object path has been approved as is
- APPROVED - Static variable in class nxopen.validate.OverrideBuilder.DecisionActions
-
- approveObjects(CAMObject[]) - Method in interface nxopen.cam.CAMSetup
-
Approve objects
License requirements: cam_base ("CAM BASE")
.
- APPROX - Static variable in class nxopen.cae.FEModelOccAttribute.AltRepDisplayStyle
-
Display approximation of base fem when in alt rep
- APPROX_NEAREST_NEIGHBOR2D - Static variable in class nxopen.fields.FieldEvaluator.InterpolationEnum
-
Locates the approximate nearest point in a plane and returns its value
- APPROX_NEAREST_NEIGHBOR3D - Static variable in class nxopen.fields.FieldEvaluator.InterpolationEnum
-
Locates the approximate nearest point in space and returns its value
- APPROX_NEAREST_NEIGHBOR_ND - Static variable in class nxopen.fields.FieldEvaluator.InterpolationEnum
-
Locates the approximate nearest point in N dimensional space and returns its value
- approximateOffset() - Method in interface nxopen.features.ThickenBuilder
-
Returns the "approximate offset surface" or "resolve self-intersections using patches" option.
- approximateSheetbodyOption() - Method in interface nxopen.tooling.DieDesDrawDieBuilder
-
Returns the option to indicate whether to use approximate sheet metal.
- approximateSheetbodyOption() - Method in interface nxopen.tooling.DieDesDrawPunchBuilder
-
Returns the option to indicate whether to use approximate sheet metal.
- approximation() - Method in interface nxopen.die.CompensateRoughDataBuilder
-
Returns the approximation desired.
- approximationTolerance() - Method in interface nxopen.tooling.CalculateAreaBuilder
-
Returns the area calculation approximation tolerance.
- approxOption() - Method in interface nxopen.features.OffsetSurfaceBuilder
-
Returns the option to create approximate offset surface if the offset surface has
self-intersections.
- appUdeSet() - Method in interface nxopen.cam.NcmTransferBuilder
-
Returns the Approach UDE Set
License requirements: cam_base ("CAM BASE")
.
- AppViewDesc() - Constructor for class nxopen.uf.UFRoute.AppViewDesc
-
- AppViewDesc(String, String) - Constructor for class nxopen.uf.UFRoute.AppViewDesc
-
- appViews - Variable in class nxopen.uf.UFRoute.LoadAppViewListData
-
- APR - Static variable in class nxopen.DateItemBuilder.MonthOfYear
-
- ARABIC - Static variable in class nxopen.features.TextBuilder.ScriptOptions
-
Specifies the Arabic character set
- ARBITRARY - Static variable in class nxopen.annotations.DatumTargetBuilder.Types
-
arbitrary
- ARBITRARY - Static variable in class nxopen.annotations.MasterSymbolListItemBuilder.TextTypes
-
- ARBITRARY - Static variable in class nxopen.annotations.SearchCriteriaDatumTargetBuilder.DatumTargetTypes
-
arbitray type
- ARBITRARY - Static variable in class nxopen.annotations.TextType
-
Specifies the default text defined in the master symbol
which can be modified in the custom symbol.
- ARBITRARY - Static variable in class nxopen.features.EdgeSymmetryBuilder.SymmetryPlaneOptions
-
Uses an arbitrary plane as plane of symmetry
- ARBITRARY - Static variable in class nxopen.geometricanalysis.HighlightLinesAnalysisBuilder.LightPlaneOptions
-
Uses an arbitrary plane as light plane
- ARBITRARY - Static variable in class nxopen.geometricutilities.CircularFrameBuilder.Subtypes
-
Arbitrary circle
- ARBITRARY - Static variable in class nxopen.geometricutilities.QuadrilateralFrameBuilder.Subtypes
-
Arbitrary quadrilateral
- ARBITRARY - Static variable in class nxopen.geometricutilities.TriangularFrameBuilder.Subtypes
-
Arbitrary triangle
- ARBITRARY_DIRECTION - Static variable in class nxopen.features.StudioXformBuilder.RotationDirectionType
-
Deprecated.
Rotate in arbitrary direction
- ARBITRARY_DIRECTION - Static variable in class nxopen.features.StudioXformBuilder.ScalingDirectionType
-
Deprecated.
Scale in arbitrary direction
- ARBITRARY_DIRECTION - Static variable in class nxopen.features.StudioXformBuilder.TranslationDirectionType
-
Deprecated.
Translate in arbitrary direction
- ARBITRARY_PATTERN - Static variable in class nxopen.uf.UFGdt.PatternType
-
- ARBITRARY_PLANE - Static variable in class nxopen.display.CgfxMattexBuilder.TextureSpaceShader
-
Deprecated.
based on specified plane
- ARBITRARY_PLANE - Static variable in class nxopen.features.StudioXformBuilder.PlanarizePlaneOptionType
-
Deprecated.
On arbitrary plane when planarize
- ARBITRARY_PLANE - Static variable in class nxopen.features.StudioXformBuilder.RotationDirectionType
-
Deprecated.
Rotate on arbitrary plane
- ARBITRARY_PLANE - Static variable in class nxopen.features.StudioXformBuilder.ScalingDirectionType
-
Deprecated.
Scale on arbitrary plane
- ARBITRARY_PLANE - Static variable in class nxopen.features.StudioXformBuilder.TranslationDirectionType
-
Deprecated.
Translate on arbitrary plane
- ARBITRARY_PLANE_TEXTURE_SPACE - Static variable in class nxopen.uf.UFDisp.TextureSpaceType
-
- ARBITRARY_REGION - Static variable in class nxopen.annotations.RegionBuilder.Types
-
arbitrary
- ARBITRARY_TEXT - Static variable in class nxopen.uf.UFDrf.CustomSymbolTextType
-
- ARBITRARY_VECTOR - Static variable in class nxopen.geometricanalysis.sectionanalysis.RadialBuilder.RotationAxisType
-
A user specified vector
- arbitraryAreaList() - Method in interface nxopen.annotations.RegionBuilder
-
- ArbitraryAreaSeedBuilder - Interface in nxopen.annotations
-
- ArbitraryAreaSeedBuilderList - Interface in nxopen.annotations
-
Represents a list of objects.
- ArbitraryTarget - Interface in nxopen.annotations
-
Represents an arbitrary datum target.
- ArbitraryTargetData - Interface in nxopen.annotations
-
Represents arbitrary datum target data .
- Arc - Interface in nxopen
-
Represents an arc curve.
- ARC - Static variable in class nxopen.cam.CamInspectionOperationFeaturetypes
-
Arc
- ARC - Static variable in class nxopen.cam.InspectionConstructedFeatureBuilder.ConstFeatType
-
Constructed Arc Feature
- ARC - Static variable in class nxopen.cam.InspectionMethodBuilder.MethodTypes
-
Arc
- arc() - Method in interface nxopen.cam.InspectionScanArcBuilder
-
Returns the Arc
License requirements: None.
- ARC - Static variable in class nxopen.cam.NcmLaserEngage.Type
-
arc
- ARC - Static variable in class nxopen.cam.NcmLaserRetract.Type
-
arc
- ARC - Static variable in class nxopen.cam.NcmPlanarEngRetBuilder.EngRetTypes
-
Arc
- ARC - Static variable in class nxopen.cam.ToolPathEditorBuilder.ExtendMethodType
-
- arc() - Method in interface nxopen.features.CylinderBuilder
-
Returns the arc
License requirements: None.
- arc() - Method in interface nxopen.features.SphereBuilder
-
Returns the selected arc associated with the Sphere.
- ARC - Static variable in class nxopen.features.SphereBuilder.Types
-
Represents the type of sphere created by providing arc.
- ARC - Static variable in class nxopen.preferences.PartObject.ObjectType
-
Arc
- ARC - Static variable in class nxopen.preferences.RoutingPath.CurveType
-
UF_ROUTE_AV_CURVES_ARCS
- ARC - Static variable in class nxopen.preferences.SessionModeling.SurfaceExtensionOption
-
- ARC - Static variable in class nxopen.routing.WindCatcherBuilder.WindCatcherType
-
- ARC - Static variable in class nxopen.SketchOffset.CapType
-
The cap type is arc cap
- Arc() - Constructor for class nxopen.uf.UFCurve.Arc
-
- Arc(Tag, double, double, double[], double) - Constructor for class nxopen.uf.UFCurve.Arc
-
- Arc() - Constructor for class nxopen.uf.UFEval.Arc
-
- Arc(boolean, double[], double, double[], double[], double[]) - Constructor for class nxopen.uf.UFEval.Arc
-
- ARC_AND_HEIGHT - Static variable in class nxopen.features.CylinderBuilder.Types
-
Arc and Height
- ARC_CENTER - Static variable in class nxopen.annotations.AssociativityPointOption
-
Arc center point
- ARC_CENTER - Static variable in class nxopen.features.AssociativityType
-
Arc-center
- ARC_CENTER - Static variable in class nxopen.features.RPOBuilder.AssociativityType
-
Arc-center
- ARC_CENTER - Static variable in class nxopen.Sketch.AssocType
-
Center of an arc, circle, or ellipse
- ARC_CENTER - Static variable in class nxopen.Sketch.ConstraintPointType
-
Center of a circle, arc, or ellipse
- ARC_CENTER - Static variable in class nxopen.uf.UFDrf.AssocType
-
- ARC_CENTER - Static variable in class nxopen.uf.UFSket.AssocType
-
- ARC_CENTER_POINT_TYPE - Static variable in class nxopen.uf.UFDrf.ObjectAssocPointType
-
- ARC_CIRCULAR - Static variable in class nxopen.uf.UFPath.ArcMode
-
- ARC_END_POINT - Static variable in class nxopen.uf.UFDisp.PolyMarker
-
- ARC_END_POINT - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- ARC_FROM_CENTER - Static variable in class nxopen.features.AssociativeArcBuilder.Types
-
Arc from center
- ARC_GEOM - Static variable in class nxopen.uf.UFBrep.GeomType
-
- ARC_LENGTH - Static variable in class nxopen.annotations.DimensionType
-
Arc Length dimension
- ARC_LENGTH - Static variable in class nxopen.annotations.SearchCriteriaDimensionBuilder.DimensionTypes
-
ArcLength
- ARC_LENGTH - Static variable in class nxopen.CurveParameterType
-
- ARC_LENGTH - Static variable in class nxopen.die.AddendumSectionBuilder.SegmentParameterType
-
The arc length parameter of an arc segment.
- ARC_LENGTH - Static variable in class nxopen.features.AeroFlangeBuilder.PointOption
-
- ARC_LENGTH - Static variable in class nxopen.features.AeroRibBuilder.PointOption
-
- ARC_LENGTH - Static variable in class nxopen.features.GeomcopyBuilder.AlongPathDistanceOptions
-
arc length option
- ARC_LENGTH - Static variable in class nxopen.features.StyledSweepBuilder.SectionOrientationOptions
-
Arc Length
- ARC_LENGTH - Static variable in class nxopen.geometricutilities.AlignmentMethodBuilder.Type
-
- ARC_LENGTH - Static variable in class nxopen.geometricutilities.Extend.ExtendType
-
- ARC_LENGTH - Static variable in class nxopen.PointCollection.PointOnCurveLocationOption
-
Scalar is an absolute arc length.
- ARC_LENGTH - Static variable in class nxopen.weld.JointmarkGuideBuilder.SpaceMethod
-
Arc Length
- ARC_LENGTH_SEGMENTS - Static variable in class nxopen.routing.SubdivideSegmentBuilder.Types
-
Arc Length Segments
- ARC_LINEAR - Static variable in class nxopen.cam.ToolPathEditorBuilder.ExtendMethodType
-
- ARC_LINEAR - Static variable in class nxopen.uf.UFPath.ArcMode
-
- ARC_LINES - Static variable in class nxopen.DxfdwgImporter.ImportPolylinesAs
-
import polylines as arc/lines
- ARC_MODE_LAST_ELEMENT - Static variable in class nxopen.uf.UFPath.ArcMode
-
- ARC_MODE_NONE - Static variable in class nxopen.uf.UFPath.ArcMode
-
- ARC_MOVE - Static variable in class nxopen.cam.InspectionCmmCommandBuilder.MoveTypes
-
Specifies an arc move
- ARC_NORMAL_TO_PART - Static variable in class nxopen.cam.NcmPlanarEngRetBuilder.EngRetTypes
-
Arc - Normal to Part
- ARC_NORMAL_TO_PART - Static variable in class nxopen.cam.NcmScEngRetBuilder.EngRetTypes
-
Arc - Normal to Part
- ARC_NORMAL_TO_TOOL_AXIS - Static variable in class nxopen.cam.NcmPlanarEngRetBuilder.EngRetTypes
-
Arc - Normal to Tool Axis
- ARC_NORMAL_TO_TOOL_AXIS - Static variable in class nxopen.cam.NcmScEngRetBuilder.EngRetTypes
-
Arc - Normal to Tool Axis
- ARC_PARALLEL_TO_TOOL_AXIS - Static variable in class nxopen.cam.NcmPlanarEngRetBuilder.EngRetTypes
-
Arc - Parallel to Tool Axis
- ARC_PARALLEL_TO_TOOL_AXIS - Static variable in class nxopen.cam.NcmScEngRetBuilder.EngRetTypes
-
Arc - Parallel to Tool Axis
- ARC_PERP_PARALLEL_TO_TAXIS - Static variable in class nxopen.cam.ArcOutputTypeCiBuilder.SplineArcOutputTypes
-
arc perp parallel to Tool Axis
- ARC_PERP_TO_TAXIS - Static variable in class nxopen.cam.ArcOutputTypeCiBuilder.SplineArcOutputTypes
-
arc perp to Tool Axis
- ARC_SPOT - Static variable in class nxopen.weld.PointMarkBuilder.WeldTypes
-
Arc Spot
- ARC_SPOT - Static variable in class nxopen.weld.WeldAdvisorCustomerDefault
-
Arc Spot
- ARC_SPOT - Static variable in class nxopen.weld.WeldFeatureSetType
-
Arc Spot
- ARC_SPOT_FEATURE - Static variable in class nxopen.uf.UFConstants
-
- ARC_SPOT_FEATURE - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
-
- ARC_SPOT_NA_TYPE - Static variable in class nxopen.uf.UFWeld.Types
-
- ARC_SPOT_TYPE - Static variable in class nxopen.uf.UFWeld.Types
-
- ARC_SPOT_WELD - Static variable in class nxopen.uf.UFConstants
-
- ARC_SPOT_WELD - Static variable in class nxopen.uf.UFDisp.PolyMarker
-
- ARC_SPOT_WELD - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- ARC_SPOT_WELD_NON_ASSOC - Static variable in class nxopen.uf.UFConstants
-
- ARC_SPOT_WELD_NON_ASSOCIATIVE - Static variable in class nxopen.uf.UFConstants
-
- ARC_TANGENT_TO_APPROACH - Static variable in class nxopen.cam.NcmScEngRetBuilder.EngRetTypes
-
Arc - Tangent to Approach
- ARC_TO_CENTER - Static variable in class nxopen.cae.CAEConnectionBuilder.PointToEdgeConnectionMethodTypeEnum
-
Create connection between arc or circular edge and its center.
- ARC_XY - Static variable in class nxopen.geometricutilities.TransformerData.ObjectType
-
- ARC_XZ - Static variable in class nxopen.geometricutilities.TransformerData.ObjectType
-
- ARC_YZ - Static variable in class nxopen.geometricutilities.TransformerData.ObjectType
-
- arcAngle() - Method in interface nxopen.cam.NcmLaserEngage
-
Returns the Arc Angle
License requirements: None.
- arcAngle() - Method in interface nxopen.cam.NcmLaserRetract
-
Returns the Arc Angle
License requirements: None.
- arcAngle() - Method in interface nxopen.cam.NcmPlanarEngRetBuilder
-
Returns the engage/retract arc angle
License requirements: None.
- arcAngle() - Method in interface nxopen.cam.NcmScEngRetBuilder
-
Returns the engage/retract arc angle
License requirements: None.
- arcAngle() - Method in interface nxopen.cam.ToolPathEditorBuilder
-
Returns the arc angle
License requirements: None.
- arcAngles - Variable in class nxopen.uf.UFDrf.AskAnnArcSegAnglesData
-
- arcAxis - Variable in class nxopen.cam.CamOperationCircularMotionDataType
-
- arcAxis - Variable in class nxopen.cam.CamOperationHelicalMotionDataType
-
- arcAxis() - Method in interface nxopen.cam.CircularAboutAxisMoveBuilder
-
Returns the arc axis
License requirements: None.
- arcAxis() - Method in interface nxopen.cam.PathCircularMotion
-
Returns the axis of the arc motion
License requirements: None.
- arcAxis() - Method in interface nxopen.cam.PathContactMotion
-
Returns the axis of the arc of the contact motion if the shape is circular
License requirements: None.
- arcAxis - Variable in class nxopen.uf.UFPath.CircularMotion
-
- arcAxis - Variable in class nxopen.uf.UFPath.HelicalMotion
-
- arcAxisType() - Method in interface nxopen.cam.CircularAboutAxisMoveBuilder
-
Returns the axis type
License requirements: None.
- arcCenter - Variable in class nxopen.cam.CamOperationCircularMotionDataType
-
- arcCenter - Variable in class nxopen.cam.CamOperationHelicalMotionDataType
-
- arcCenter() - Method in interface nxopen.cam.PathCircularMotion
-
Returns the center of the arc motion
License requirements: None.
- arcCenter() - Method in interface nxopen.cam.PathContactMotion
-
Returns the center of the arc of the contact motion if the shape is circular
License requirements: None.
- arcCenter - Variable in class nxopen.uf.UFCurve.Arc
-
- arcCenter - Variable in class nxopen.uf.UFDrf.ArcInfo
-
- arcCenter - Variable in class nxopen.uf.UFPath.CircularMotion
-
- arcCenter - Variable in class nxopen.uf.UFPath.HelicalMotion
-
- ArcCollection - Interface in nxopen
-
Represents a collection of arcs.
- ArcComponent - Interface in nxopen.annotations
-
Represents a single arc in an annotation and can be queried
for information about that arc.
- ArcComponent.ArcType - Class in nxopen.annotations
-
the arc type
- arcConstraintSubtype - Variable in class nxopen.uf.UFCurve.LineArc
-
- arcData - Variable in class nxopen.uf.UFDrf.AssortpartArc
-
- arcDirection() - Method in interface nxopen.cam.PathContactMotion
-
Returns the direction of the arc of the contact motion if the shape is circular
License requirements: None.
- arcExtendMethod() - Method in interface nxopen.cam.CircularAboutAxisMoveBuilder
-
Returns the arc extension type
License requirements: None.
- ARCHITECTURAL_FEET_INCHES - Static variable in class nxopen.annotations.DimensionUnit
-
Specified architectural units - converts inches
to feet for measurements larger than 12 inches
- ARCHITECTURAL_FEET_INCHES - Static variable in class nxopen.uf.UFDrf.LinearUnits
-
- ArchiveImportBuilder - Interface in nxopen.sim
-
Represents a ArchiveImportBuilder builder object.
- archPartPath() - Method in interface nxopen.linedesigner.CreateSystemBuilder
-
Returns an API that gets arch part path
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- ArcInfo() - Constructor for class nxopen.uf.UFDrf.ArcInfo
-
- ArcInfo(int, int, double[], double, double, double, int, UFDrf.SymbolInstance[], int, UFDrf.AssocInfo[]) - Constructor for class nxopen.uf.UFDrf.ArcInfo
-
- arcInfo - Variable in class nxopen.uf.UFDrf.CenterlineInfo
-
- arcInfo - Variable in class nxopen.uf.UFDrf.DimInfo
-
- arcLength() - Method in interface nxopen.DatumConstraint
-
Returns
License requirements: solid_modeling ("SOLIDS MODELING")
.
- ARCLENGTH - Static variable in class nxopen.features.AOCSBuilder.OffsetType
-
offset_type_arclength
- arcLength() - Method in interface nxopen.features.DatumAxisBuilder
-
Returns the arc length.
- arcLength() - Method in interface nxopen.features.DivideCurveBuilder
-
Returns the arc length
License requirements: None.
- arcLength() - Method in interface nxopen.features.PointSetBuilder
-
Returns the arc length of the curve at which a point is to be created.
- ARCLENGTH - Static variable in class nxopen.weld.WeldSpacingCalcMethod
-
spaces based on arc length
- ArcLengthBetweenPointsData() - Constructor for class nxopen.Measurement.ArcLengthBetweenPointsData
-
- ArcLengthDimension - Interface in nxopen.annotations
-
- arcLengthParameter - Variable in class nxopen.geometricanalysis.GeometricProperties.CaeCurve
-
ArcLength parametrization
- arcLengthType() - Method in interface nxopen.DatumConstraint
-
Returns
License requirements: solid_modeling ("SOLIDS MODELING")
.
- arclOption - Variable in class nxopen.uf.UFCurve.Proj
-
- ArcOutputTypeCiBuilder - Interface in nxopen.cam
-
Represents a ArcOutputTypeCiBuilder .
- ArcOutputTypeCiBuilder.OutputTypes - Class in nxopen.cam
-
Available types for output
- ArcOutputTypeCiBuilder.SplineArcOutputTypes - Class in nxopen.cam
-
the available types for spline arc output
- ArcOutputTypeCiBuilder.SplineFitToleranceTypes - Class in nxopen.cam
-
the available types for spline fitting tolerance
- ArcOutputTypeCiBuilder.SplineLineOutputTypes - Class in nxopen.cam
-
the available types for spline line output
- arcPrefix - Variable in class nxopen.uf.UFSket.AskPreferencesData
-
- arcRadius - Variable in class nxopen.cam.CamOperationCircularMotionDataType
-
- arcRadius - Variable in class nxopen.cam.CamOperationHelicalMotionDataType
-
- arcRadius() - Method in interface nxopen.cam.PathCircularMotion
-
Returns the radius of the arc motion
License requirements: None.
- arcRadius() - Method in interface nxopen.cam.PathContactMotion
-
Returns the radius of the arc of the contact motion if the shape is circular
License requirements: None.
- arcRadius() - Method in interface nxopen.cam.ToolPathEditorBuilder
-
Returns the arc radius
License requirements: None.
- arcRadius() - Method in interface nxopen.tooling.BurringInsertBuilder
-
Returns the arc radius value.
- arcRadius - Variable in class nxopen.uf.UFPath.CircularMotion
-
- arcRadius - Variable in class nxopen.uf.UFPath.HelicalMotion
-
- arcs() - Method in interface nxopen.BasePart
-
Returns the ArcCollection instance belonging to this part .
- arcs - Variable in class nxopen.uf.UFDrf.AskIdSymbolGeometryData
-
- ArcSegment - Interface in nxopen.routing
-
Represents a arc segment.
- ArcSegmentCollection - Interface in nxopen.routing
-
- arcSegments() - Method in interface nxopen.routing.SegmentManager
-
Arc Segment collection .
- arcSegmentsType() - Method in interface nxopen.features.SpineCurveBuilder
-
Returns the option indicating type of shape
License requirements: None.
- arcType - Variable in class nxopen.uf.UFDrf.ArcInfo
-
- arcVector() - Method in interface nxopen.cam.ProbeCalibrateStylusMoveBuilder
-
Returns the arc vector defining the cylinder to probe
License requirements: None.
- arcVector() - Method in interface nxopen.cam.ProbeInspectBorebossMoveBuilder
-
Returns the arc vector defining the cylinder to inspect
License requirements: None.
- area - Variable in class nxopen.cae.BeamSection.Properties
-
Area of section
- AREA - Static variable in class nxopen.cae.modelcheck.TestValueTypes.TestType
-
- AREA - Static variable in class nxopen.cae.PostGraphBuilder.EdgeIntegralOption
-
- AREA - Static variable in class nxopen.cae.PostGraphBuilder.FaceIntegralOption
-
- AREA - Static variable in class nxopen.cae.ResultProbeBuilder.EdgeIntegral
-
- AREA - Static variable in class nxopen.cae.ResultProbeBuilder.FaceIntegral
-
- AREA - Static variable in class nxopen.cae.XyFunctionMeasure
-
Area
- area() - Method in interface nxopen.features.EmbedManagerBuilder
-
Returns the area in the parts file which matches the application usage.
- AREA - Static variable in class nxopen.features.FlatteningAndFormingBuilder.DistortionMap
-
Distortion of area
- AREA - Static variable in class nxopen.features.FlatteningAndFormingBuilderEx.DistortionMap
-
Distortion of area
- AREA - Static variable in class nxopen.features.NSidedSurfaceBuilder.UVOrientationType
-
area orientation
- AREA - Static variable in class nxopen.FlatteningBuilder.DistortionMapType
-
Deprecated.
area distortion map
- AREA - Static variable in class nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder.ScaleTypes
-
Equalized by Area
- AREA - Static variable in class nxopen.MeasureBodies.ActiveValue
-
- area() - Method in interface nxopen.MeasureBodies
-
Returns the value for area of the measurement
License requirements: None.
- AREA - Static variable in class nxopen.MeasureFaces.ActiveValue
-
- area() - Method in interface nxopen.MeasureFaces
-
Returns the value for area of the measurement
License requirements: None.
- area() - Method in interface nxopen.motion.BeamForceBuilder
-
Returns the area
License requirements: mechanisms ("MECHANISMS")
.
- area() - Method in interface nxopen.motion.UserDefinedSectionBuilder
-
Returns the area
License requirements: mechanisms ("MECHANISMS")
.
- AREA - Static variable in class nxopen.Scalar.DimensionalityType
-
- area - Variable in class nxopen.uf.UFWeight.Properties
-
- AREA_CM2 - Static variable in class nxopen.cae.XyFunctionUnit
-
Area unit: Squared centimeters
- AREA_FILL - Static variable in class nxopen.annotations.HatchBuilder.AnnotationTypes
-
Deprecated.
Area Fill
- AREA_FILL - Static variable in class nxopen.annotations.HatchFillSettingsBuilder.AnnotationTypes
-
Area Fill
- AREA_FT2 - Static variable in class nxopen.cae.XyFunctionUnit
-
Area unit: Squared feet
- AREA_IN2 - Static variable in class nxopen.cae.XyFunctionUnit
-
Area unit: Squared inches
- AREA_M2 - Static variable in class nxopen.cae.XyFunctionUnit
-
Area unit: Squared meters
- AREA_MILLING - Static variable in class nxopen.cam.SurfaceContourBuilder.DriveMethodTypes
-
Area Milling
- AREA_MM2 - Static variable in class nxopen.cae.XyFunctionUnit
-
Area unit: Squared millimeters
- areaColor - Variable in class nxopen.cae.Post.AnnotationBox
-
- areaControl() - Method in interface nxopen.features.FillHoleBuilder
-
Returns the area control ratio of the facet body
License requirements: None.
- areaError - Variable in class nxopen.uf.UFWeight.Properties
-
- Areafill() - Constructor for class nxopen.uf.UFDrf.Areafill
-
- Areafill(UFDrf.ValidMaterial, double, double, double) - Constructor for class nxopen.uf.UFDrf.Areafill
-
- areafillAngle() - Method in interface nxopen.annotations.HatchBuilder
-
- areafillAngle() - Method in interface nxopen.annotations.HatchFillSettingsBuilder
-
Returns the areafill angle
License requirements: None.
- areaFillAngle() - Method in interface nxopen.annotations.HatchStyleBuilder
-
Returns the area fill angle
License requirements: None.
- areaFillAngle - Variable in class nxopen.uf.UFDrf.HatchFillPreferences
-
- AreaFillMaterial - Class in nxopen.annotations
-
Specifies the area fill material type
- areaFillMaterial() - Method in interface nxopen.annotations.HatchStyleBuilder
-
Returns the area fill material
License requirements: None.
- areaFillMaterial - Variable in class nxopen.uf.UFDrf.HatchFillPreferences
-
- areaFillScale() - Method in interface nxopen.annotations.HatchStyleBuilder
-
Returns the area fill scale
License requirements: None.
- areaFillScale - Variable in class nxopen.uf.UFDrf.HatchFillPreferences
-
- areaLaw() - Method in interface nxopen.geometricutilities.ScalingMethodBuilder
-
Returns the area law.
- areAllOccurrencesIncluded() - Method in interface nxopen.annotations.QueryPmiBuilder
-
Returns an all occurrences of selected component to be included toggle
License requirements: None.
- AreaMillingContainment - Interface in nxopen.cam
-
Represents a Containment Builder .
- AreaMillingContainment.CutDirectionTypes - Class in nxopen.cam
-
Available types for Cut Direction in Area Milling
- areaMillingCutDirection() - Method in interface nxopen.cam.AreaMillingSteepContainment
-
Returns the Cut Direction
License requirements: None.
- AreaMillingNonSteepContainment - Interface in nxopen.cam
-
Represents a NonSteep Containment Builder .
- AreaMillingNonSteepContainment.AmPocketDirTypes - Class in nxopen.cam
-
Available types for Area Milling Pocketing Direction in FASurfaceContour
- AreaMillingNonSteepContainment.AutoPatCenterTypes - Class in nxopen.cam
-
Available types for area milling Auto Pattern Center
- AreaMillingNonSteepContainment.PatternDirectionTypes - Class in nxopen.cam
-
Available types for Pattern Direction in Area Milling
- AreaMillingSteepContainment - Interface in nxopen.cam
-
Represents a Steep Containment Builder .
- AreaMillingSteepContainment.CutLevelTypes - Class in nxopen.cam
-
cut level types .
- areaOfCutRegion - Variable in class nxopen.uf.UFTurn.AskCutRegionOfIndexData
-
- areaPreserve - Variable in class nxopen.uf.UFModl.GflangeOptionsData
-
- areaSize() - Method in interface nxopen.annotations.DatumTargetBuilder
-
Returns the area size
License requirements: None.
- areaSize() - Method in interface nxopen.cam.SmallAreaAvoidance
-
Returns the area size
License requirements: None.
- areAssemblyConstraintsDelayed() - Method in interface nxopen.assemblies.WaveQuery
-
Returns true if update of assembly constraints is delayed
License requirements: wave ("WAVE FUNCTIONALITY")
.
- areaState - Variable in class nxopen.uf.UFWeight.Properties
-
- areaSymbol() - Method in interface nxopen.annotations.FeatureControlFrameDataBuilder
-
Returns the area symbol
License requirements: None.
- AreaTarget - Interface in nxopen.annotations
-
Represents an area target
To create or edit an instance of this class, use
PmiDatumTargetBuilder
Created in NX4.0.0
- areaTranslucency - Variable in class nxopen.cae.Post.AnnotationBox
-
- areAttachedPmiIncluded() - Method in interface nxopen.annotations.QueryPmiBuilder
-
Returns an attached pmi to selected geometry to be included toggle
License requirements: None.
- areAttributesDefault(int) - Method in interface nxopen.weld.CharacteristicsBuilder
-
- areAttributesDefault(CharacteristicsBuilder.Type) - Method in interface nxopen.weld.CharacteristicsBuilder
-
Returns true if the characteristics builder contains all attributes with default values.
- areBordersEnabled() - Method in interface nxopen.facet.FeatureExtractionBuilder
-
Returns the extracting borders option
License requirements: None.
- areDraftObjectsConst(UFVariant, boolean) - Method in interface nxopen.uf.UFDrf
-
- AREF - Static variable in class nxopen.ame.ConstantType
-
- arePortsAligned() - Method in interface nxopen.routing.PortConnection
-
Returns whether the ports in the port connection are aligned correctly.
- arePortsConnectable(Tag, Tag) - Method in interface nxopen.uf.UFRoute
-
- areReferencingMemberObjectsIncluded() - Method in interface nxopen.annotations.QueryPmiBuilder
-
Returns a referencing member objects of selected geometry to be included toggle
License requirements: None.
- areRegionsEnabled() - Method in interface nxopen.facet.FeatureExtractionBuilder
-
Returns the extracting regions option
License requirements: None.
- areSegmentsDisconnected(SplineSegment, SplineSegment, ControlPoint) - Method in interface nxopen.routing.DiscontinuityCornerCollection
-
Checks whether segment1 and segment2 are disconnected at a control point
due to a discontinuity corner.
- areSegmentsTangent(Tag, Tag, Tag) - Method in interface nxopen.uf.UFRoute
-
- ARGAND - Static variable in class nxopen.cae.xyplot.ComplexOption2D
-
Argand for 2D plot
- ARGAND - Static variable in class nxopen.cae.xyplot.ComplexOption3D
-
Argand for 3D plot which use the real z coordindate
- ARGAND3D - Static variable in class nxopen.cae.xyplot.ComplexOption2D
-
Argand for 3D plot which z coordindate come from the x coordinate
- ARGUMENT_AXIS_NUMBER - Static variable in class nxopen.cae.xyplot.TextType
-
Argument Axis number label
- ArgumentAxisStyleSetting - Interface in nxopen.cae.xyplot
-
Represents the argument axis display style.
- argumentDefault - Variable in class nxopen.RuleManager.FunctionArgumentsInformation
-
Default for optional argument
- argumentDescription - Variable in class nxopen.RuleManager.FunctionArgumentsInformation
-
Description of argument
- argumentDimensionality - Variable in class nxopen.RuleManager.FunctionArgumentsInformation
-
argument dimensionality
- argumentName - Variable in class nxopen.RuleManager.FunctionArgumentsInformation
-
Argument name
- argumentSelectionTypes - Variable in class nxopen.RuleManager.FunctionArgumentsInformation
-
Selection object types for argument, comma-separated list
- argumentStyle - Variable in class nxopen.RuleManager.FunctionArgumentsInformation
-
Style of argument, Required or Optional
- argumentType - Variable in class nxopen.RuleManager.FunctionArgumentsInformation
-
Type of argument
- ARITHMATIC_MEAN - Static variable in class nxopen.cae.Result.ComputationType
-
mean of the values at the node
- ARITHMETIC_MEAN - Static variable in class nxopen.cae.ResultProbeBuilder.CombineAcrossEntities
-
- ARITHMETIC_MEAN - Static variable in class nxopen.cae.ResultProbeBuilder.CombineAcrossIterations
-
- ARITHMETIC_MEAN - Static variable in class nxopen.cae.ResultProbeBuilder.GeometryValue
-
- ARITHMETIC_MEAN - Static variable in class nxopen.cae.ResultProbeBuilder.NodalCombination
-
- ARM_LENGTH - Static variable in class nxopen.HumanData.AdvancedScalingType
-
Indicate scaling of arm length
- armLength() - Method in interface nxopen.features.vehicledesign.ManikinBuilder
-
Returns the arm length.
- AROUND - Static variable in class nxopen.annotations.LeaderType
-
- AROUND_ALIGNED - Static variable in class nxopen.annotations.LeaderType
-
- AROUND_AXIS - Static variable in class nxopen.cam.DmRotaryFloorFinishBuilder.DirectionType
-
around axis
- aroundEdgeDiaOption() - Method in interface nxopen.cae.CircularImprintBuilder
-
Returns an around edge dia option
License requirements: None.
- Arrangement - Interface in nxopen.assemblies
-
- arrangement() - Method in interface nxopen.cae.ViewLayoutManager
-
Returns the cae view layout arrangement type
License requirements: None.
- arrangement() - Method in interface nxopen.drawings.ViewStyleBaseBuilder
-
Returns the arrangement on the BASE tab of the View Style Dialog
License requirements: None.
- arrangement() - Method in interface nxopen.LayoutDefinition
-
Returns the arrangement type of the layout definition.
- arrangement - Variable in class nxopen.uf.UFAssem.CaptureArrangementFromCurrentSequenceData
-
- arrangement - Variable in class nxopen.uf.UFAssem.CaptureArrangementFromCurrentSequenceExtendedData
-
- ARRANGEMENT_SPECIFIC_POSITION_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
-
Arrangement specific positioning
- ArrangementCollection - Interface in nxopen.assemblies
-
a collection of arrangements
To obtain an instance of this class, refer to
ComponentAssembly
Created in NX3.0.0
- arrangementName() - Method in interface nxopen.drawings.ViewStyleBaseBuilder
-
Returns the arrangement name on the BASE tab of the View Style Dialog
License requirements: None.
- arrangementName - Variable in class nxopen.uf.UFDraw.ViewInfo
-
- arrangements() - Method in interface nxopen.assemblies.AssembliesParameterPropertiesBuilder
-
Returns the arrangements.
- arrangements() - Method in interface nxopen.assemblies.ComponentAssembly
-
The collection of
Arrangement
s defined in the ComponentAssembly
Created in NX3.0.0
- arrangements - Variable in class nxopen.uf.UFAssem.AskArrangementsInPartData
-
- ArrangementsBuilder - Interface in nxopen.assemblies
-
Represents an arrangements builder that selects an arrangement
.
- arrangementSpecific() - Method in interface nxopen.positioning.ComponentConstraint
-
- ARRAY - Static variable in class nxopen.ame.PlcDataType
-
- ARRAY - Static variable in class nxopen.blockstyler.PropertyList.PropertyType
-
Array
- array - Variable in class nxopen.NXObject.AttributeInformation
-
The attribute is an array attribute
- ARRAY - Static variable in class nxopen.PropertyContainer.PropertyType
-
Array
- ARRAY - Static variable in class nxopen.tooling.InsertAuxiliaryBuilder.DesignToolOption
-
array
- array - Variable in class nxopen.uf.UFRoute.TagList
-
- ARRAY_ALLOCATION_ERROR - Static variable in class nxopen.uf.UFConstants
-
- arrayAngle() - Method in interface nxopen.cam.InspectionOperationTransformBuilder
-
Returns the array angle
License requirements: None.
- arrayAngle() - Method in interface nxopen.cam.OperationTransformBuilder
-
Returns the array angle
License requirements: None.
- arrayCircularIncrementAngle() - Method in interface nxopen.cam.InspectionOperationTransformBuilder
-
Returns the array circular increment angle
License requirements: None.
- arrayCircularIncrementAngle() - Method in interface nxopen.cam.OperationTransformBuilder
-
Returns the array circular increment angle
License requirements: None.
- arrayCircularNumber() - Method in interface nxopen.cam.InspectionOperationTransformBuilder
-
Returns the array circular number
License requirements: None.
- arrayCircularNumber() - Method in interface nxopen.cam.OperationTransformBuilder
-
Returns the array circular number
License requirements: None.
- arrayCircularRadius() - Method in interface nxopen.cam.InspectionOperationTransformBuilder
-
Returns the array circular radius
License requirements: None.
- arrayCircularRadius() - Method in interface nxopen.cam.OperationTransformBuilder
-
Returns the array circular radius
License requirements: None.
- arrayCircularStartAngle() - Method in interface nxopen.cam.InspectionOperationTransformBuilder
-
Returns the array circular start angle
License requirements: None.
- arrayCircularStartAngle() - Method in interface nxopen.cam.OperationTransformBuilder
-
Returns the array circular start angle
License requirements: None.
- arrayData - Variable in class nxopen.uf.UFAssem.AskIsetArrayData
-
- arrayData - Variable in class nxopen.uf.UFAssem.AskMcArrayData
-
- arrayElementIndex - Variable in class nxopen.NXObject.AttributeInformation
-
If this struct represents an array attribute element, this is the index (numerical, starting with 0).
- arrayIndex() - Method in interface nxopen.AttributePropertiesBaseBuilder
-
Returns the array index.
- arrayName - Variable in class nxopen.uf.UFAssem.IsetArrayData
-
- arrayName - Variable in class nxopen.uf.UFAssem.McArrayData
-
- arrayNumberAlongXc() - Method in interface nxopen.cam.InspectionOperationTransformBuilder
-
Returns the array number along XC
License requirements: None.
- arrayNumberAlongXc() - Method in interface nxopen.cam.OperationTransformBuilder
-
Returns the array number along XC
License requirements: None.
- arrayNumberAlongYc() - Method in interface nxopen.cam.InspectionOperationTransformBuilder
-
Returns the array number along YC
License requirements: None.
- arrayNumberAlongYc() - Method in interface nxopen.cam.OperationTransformBuilder
-
Returns the array number along YC
License requirements: None.
- arrayOffsetXc() - Method in interface nxopen.cam.InspectionOperationTransformBuilder
-
Returns the array offset XC
License requirements: None.
- arrayOffsetXc() - Method in interface nxopen.cam.OperationTransformBuilder
-
Returns the array offset XC
License requirements: None.
- arrayOffsetYc() - Method in interface nxopen.cam.InspectionOperationTransformBuilder
-
Returns the array offset YC
License requirements: None.
- arrayOffsetYc() - Method in interface nxopen.cam.OperationTransformBuilder
-
Returns the array offset YC
License requirements: None.
- arrayOriginPoint() - Method in interface nxopen.cam.InspectionOperationTransformBuilder
-
Returns the array origin point
License requirements: None.
- arrayOriginPoint() - Method in interface nxopen.cam.OperationTransformBuilder
-
Returns the array origin point
License requirements: None.
- arrayPosition - Variable in class nxopen.routing.DesignRuleViolation.ViolationLocationData
-
- ArrayRecord2D - Interface in nxopen.cae.ftk
-
Manages the 2d array record
Not support KF.
- ArrayRecord2D.ComplexData - Class in nxopen.cae.ftk
-
- ArrayRecord2D.RealData - Class in nxopen.cae.ftk
-
- ArrayRecord2DEven - Interface in nxopen.cae.ftk
-
Manages the 2d array record with even abscissa data
Not support KF.
- ArrayRecord2DEven.EvenComplexData - Class in nxopen.cae.ftk
-
- ArrayRecord2DEven.EvenRealData - Class in nxopen.cae.ftk
-
- ArrayRecord3D - Interface in nxopen.cae.ftk
-
Manages the 3d array record
Not support KF.
- arrays - Variable in class nxopen.uf.UFAssem.AskArraysOfInstData
-
- arraySubtype - Variable in class nxopen.uf.UFAssem.McArrayData
-
- arrayTags - Variable in class nxopen.uf.UFAssem.AskArraysInPartData
-
- arrDisplay - Variable in class nxopen.uf.UFDrf.OrddispInfo
-
- ARROW - Static variable in class nxopen.annotations.DatumTargetBuilder.TerminatorTypes
-
terminated with Arrow only
- ARROW - Static variable in class nxopen.drawings.SectionLineSegmentPointBuilder.SegmentTypes
-
- ARROW_BOTTOM_OPEN - Static variable in class nxopen.uf.UFDrf.ArrowType
-
- ARROW_BOX - Static variable in class nxopen.uf.UFDrf.ArrowType
-
- ARROW_CLOSED - Static variable in class nxopen.uf.UFDrf.ArrowType
-
- ARROW_CROSS - Static variable in class nxopen.uf.UFDrf.ArrowType
-
- ARROW_DOT - Static variable in class nxopen.uf.UFDrf.ArrowType
-
- ARROW_DOUBLE_CLOSED - Static variable in class nxopen.uf.UFDrf.ArrowType
-
- ARROW_DOUBLE_OPEN - Static variable in class nxopen.uf.UFDrf.ArrowType
-
- ARROW_DOUBLE_SOLID_CLOSED - Static variable in class nxopen.uf.UFDrf.ArrowType
-
- ARROW_FILLED - Static variable in class nxopen.uf.UFDrf.ArrowFillType
-
- ARROW_INTEGRAL - Static variable in class nxopen.uf.UFDrf.ArrowType
-
- ARROW_NO_FILL - Static variable in class nxopen.uf.UFDrf.ArrowFillType
-
- ARROW_NONE - Static variable in class nxopen.uf.UFDrf.ArrowType
-
- ARROW_OPEN - Static variable in class nxopen.uf.UFDrf.ArrowType
-
- ARROW_SOLID_CLOSED - Static variable in class nxopen.uf.UFDrf.ArrowType
-
- ARROW_SYM - Static variable in class nxopen.uf.UFDrf.ArrowType
-
- ARROW_TOP_OPEN - Static variable in class nxopen.uf.UFDrf.ArrowType
-
- arrowAngle() - Method in interface nxopen.annotations.ArrowComponent
-
Returns the arrow angle.
- arrowAngle() - Method in interface nxopen.diagramming.SheetBorderSettingsBuilder
-
Returns the angle of arrow in the borders.
- arrowAngle() - Method in interface nxopen.drawings.SheetBorderSettingsBuilder
-
Returns the arrow angle
License requirements: None.
- arrowAngle - Variable in class nxopen.uf.UFDrf.ArrowInfo
-
- arrowAngle - Variable in class nxopen.uf.UFDrf.AskArrowData
-
- ArrowComponent - Interface in nxopen.annotations
-
Represents a single arrow in an annotation and can be
queried for information about that arrow.
- arrowData - Variable in class nxopen.uf.UFDrf.AssortpartArrow
-
- arrowDir - Variable in class nxopen.uf.UFDraw.AskFoldedSxlineData
-
- arrowDir - Variable in class nxopen.uf.UFDraw.AskHalfSxlineData
-
- arrowDir - Variable in class nxopen.uf.UFDraw.AskPictorialSxlineData
-
- arrowDir - Variable in class nxopen.uf.UFDraw.AskRevolvedSxlineData
-
- arrowDir - Variable in class nxopen.uf.UFDraw.AskSimpleSxlineData
-
- arrowDir - Variable in class nxopen.uf.UFDraw.AskSteppedSxlineData
-
- arrowDir - Variable in class nxopen.uf.UFDraw.AskUnfoldedSxlineData
-
- arrowDirection() - Method in interface nxopen.annotations.CuttingPlaneSymbolBuilder
-
Returns the Cutting Plane Symbol Arrow Direction relative to plane
License requirements: None.
- arrowDirection() - Method in interface nxopen.diagramming.SheetBorderSettingsBuilder
-
Returns the direction of arrow like Into Sheet or Out of Sheet.
- arrowDirection() - Method in interface nxopen.drawings.SectionLineBuilder
-
- arrowDirection() - Method in interface nxopen.drawings.SheetBorderSettingsBuilder
-
Returns the arrow direction
License requirements: None.
- ArrowDirectionType - Class in nxopen.diagramming
-
the arrow direction type
- ArrowDirectionType - Class in nxopen.drawings
-
the arrow direction type
- ArrowDisplay - Class in nxopen.annotations
-
Specifies the arrow display option
- arrowDisplay() - Method in interface nxopen.annotations.DimensionPreferences
-
Returns the arrow display
License requirements: None.
- arrowDisplay - Variable in class nxopen.uf.UFDrf.DimensionPreferences
-
- arrowDisplay - Variable in class nxopen.uf.UFDrf.DimensionPreferences1
-
- arrowDisplayFlag() - Method in interface nxopen.cam.DisplayPaint
-
Returns the arrow display flag
License requirements: None.
- arrowDisplayFlag() - Method in interface nxopen.cam.OperationDisplayOptionsBuilder
-
Returns the arrow display flag
License requirements: None.
- arrowFill - Variable in class nxopen.uf.UFDrf.ArrowInfo
-
- arrowhead() - Method in interface nxopen.annotations.LeaderData
-
Returns the arrowhead
License requirements: None.
- arrowheadAngle() - Method in interface nxopen.drawings.SectionLineStyleBuilder
-
- arrowHeadAngle() - Method in interface nxopen.drawings.ViewProjectedArrowSettingsBuilder
-
Returns the arrow head angle
License requirements: None.
- arrowheadAngle() - Method in interface nxopen.drawings.ViewSectionLineBuilder
-
Returns the included angle for the arrowhead
License requirements: None.
- arrowHeadAngle() - Method in interface nxopen.features.shipdesign.AlongGuideCutBuilder
-
- arrowheadAngle - Variable in class nxopen.uf.UFGdt.LeaderSpec
-
- arrowheadColor - Variable in class nxopen.uf.UFGdt.LeaderSpec
-
- arrowheadFont - Variable in class nxopen.uf.UFGdt.LeaderSpec
-
- arrowHeadHeight() - Method in interface nxopen.features.shipdesign.AlongGuideCutBuilder
-
- arrowheadIncludedAngle() - Method in interface nxopen.annotations.LineAndArrowPreferences
-
Returns the arrowhead included angle
License requirements: None.
- arrowheadIncludedAngle() - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
Returns the arrowhead included angle
License requirements: None.
- arrowheadIncludedAngle - Variable in class nxopen.uf.UFDrf.LineArrowPreferences
-
- arrowheadLength() - Method in interface nxopen.annotations.LineAndArrowPreferences
-
Returns the arrowhead length
License requirements: None.
- arrowheadLength() - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
Returns the arrowhead length
License requirements: None.
- arrowheadLength() - Method in interface nxopen.drawings.SectionLineStyleBuilder
-
- arrowHeadLength() - Method in interface nxopen.drawings.ViewProjectedArrowSettingsBuilder
-
Returns the arrow head length
License requirements: None.
- arrowheadLength() - Method in interface nxopen.drawings.ViewSectionLineBuilder
-
Returns the arrowhead length
License requirements: None.
- arrowheadLength - Variable in class nxopen.uf.UFDrf.LineArrowPreferences
-
- arrowheadLength - Variable in class nxopen.uf.UFGdt.LeaderSpec
-
- arrowheadStyle() - Method in interface nxopen.drawings.SectionLineStyleBuilder
-
- arrowHeadStyle() - Method in interface nxopen.drawings.ViewProjectedArrowSettingsBuilder
-
Returns the arrow head style
License requirements: None.
- arrowheadSubtype - Variable in class nxopen.uf.UFDrf.AssortpartArrow
-
- arrowHeadTail() - Method in interface nxopen.diagramming.SheetBorderSettingsBuilder
-
Returns the length of arrow tail.
- arrowHeadTail() - Method in interface nxopen.drawings.SheetBorderSettingsBuilder
-
Returns the arrowhead tail
License requirements: None.
- ArrowheadType - Class in nxopen.annotations
-
Specifies the arrowhead type
- arrowheadWidth - Variable in class nxopen.uf.UFGdt.LeaderSpec
-
- arrowHeight() - Method in interface nxopen.features.shipdesign.AlongGuideCutBuilder
-
- arrowHeight - Variable in class nxopen.uf.UFDrf.ArrowInfo
-
- arrowHeight - Variable in class nxopen.uf.UFDrf.AskArrowData
-
- arrowIncludeAngle - Variable in class nxopen.uf.UFDrf.ArrowInfo
-
- ArrowInfo() - Constructor for class nxopen.uf.UFDrf.ArrowInfo
-
- ArrowInfo(int, UFDrf.ArrowType, UFDrf.ArrowFillType, double[], double, double, double, double) - Constructor for class nxopen.uf.UFDrf.ArrowInfo
-
- arrowInfo - Variable in class nxopen.uf.UFDrf.DimInfo
-
- arrowInfo - Variable in class nxopen.uf.UFDrf.GdtSymbolInfo
-
- arrowInfo - Variable in class nxopen.uf.UFDrf.IdSymbolInfo
-
- arrowInfo - Variable in class nxopen.uf.UFDrf.LabelInfo
-
- arrowInfo - Variable in class nxopen.uf.UFGdt.LeaderSpec
-
- arrowLength() - Method in interface nxopen.annotations.CuttingPlaneSymbolBuilder
-
Returns the Cutting Plane Symbol Arrow Length
License requirements: None.
- arrowLength() - Method in interface nxopen.diagramming.SheetBorderSettingsBuilder
-
Returns the length of arrow in the borders.
- arrowLength() - Method in interface nxopen.drawings.SectionLineStyleBuilder
-
- arrowLength() - Method in interface nxopen.drawings.SheetBorderSettingsBuilder
-
Returns the arrow length
License requirements: None.
- arrowLength() - Method in interface nxopen.drawings.ViewSectionLineBuilder
-
Returns the arrow length
License requirements: None.
- arrowLength - Variable in class nxopen.uf.UFDrf.AskArrowData
-
- arrowLineDistanceToGeometry() - Method in interface nxopen.drawings.ViewProjectedArrowSettingsBuilder
-
Returns the arrow line distance to geometry
License requirements: None.
- arrowLineLength() - Method in interface nxopen.drawings.ViewProjectedArrowSettingsBuilder
-
Returns the arrow line length
License requirements: None.
- arrowObject - Variable in class nxopen.uf.UFDraw.HalfSxsegs
-
- arrowOrigin - Variable in class nxopen.uf.UFDrf.ArrowInfo
-
- arrowOutLengthFactor - Variable in class nxopen.uf.UFDrf.LineArrowPreferences
-
- ArrowParms() - Constructor for class nxopen.uf.UFDraw.ArrowParms
-
- ArrowParms(double, double, double, double, double, UFDraw.ArwHeadType, UFDraw.ArwHeadCntl) - Constructor for class nxopen.uf.UFDraw.ArrowParms
-
- arrowParms - Variable in class nxopen.uf.UFDraw.AskSxlineDefaultPrfsData
-
- arrowParms - Variable in class nxopen.uf.UFDraw.AskSxlineDisplayData
-
- ARROWS - Static variable in class nxopen.cae.modelcheck.ReverseShellElementNormalBuilder.DisplayTypeValue
-
- ARROWS - Static variable in class nxopen.cae.Post.Style
-
- ARROWS_AWAYFROM_LINE - Static variable in class nxopen.drawings.ViewSectionLineBuilder.DisplayType
-
- arrowSideOption() - Method in interface nxopen.features.TrimAndExtendBuilder
-
Returns the trim extend desired result type
License requirements: None.
- arrowSideOption() - Method in interface nxopen.features.TrimExtendBuilder
-
Returns the trim and extend arrow side option to specify to retain or discard material in trim operations when Limits are set to Until Selected
License requirements: None.
- arrowSideWeldData() - Method in interface nxopen.annotations.LineWeldBuilder
-
Returns the
LineWeldDataBuilder
for the arrow side of the weld symbol
License requirements: None.
- arrowSize() - Method in interface nxopen.pid.PreferencesConnectionBuilder
-
Returns the arrow size.
- ARROWSTOWARDS_LINE - Static variable in class nxopen.drawings.ViewSectionLineBuilder.DisplayType
-
- arrowStyle() - Method in interface nxopen.diagramming.SheetBorderSettingsBuilder
-
Returns the type of arrow style like Open, Closed...
- arrowStyle() - Method in interface nxopen.drawings.SheetBorderSettingsBuilder
-
Returns the arrow style
License requirements: None.
- arrowStyle() - Method in interface nxopen.pid.PreferencesConnectionBuilder
-
Returns the arrow style.
- ArrowStyleType - Class in nxopen.diagramming
-
the arrow style type
- ArrowStyleType - Class in nxopen.drawings
-
the arrow style type
- arrowType() - Method in interface nxopen.diagramming.LeaderLineBuilder
-
Returns the arrow type of the end arrow
License requirements: None.
- arrowType - Variable in class nxopen.uf.UFDrf.ArrowInfo
-
- arrowType - Variable in class nxopen.uf.UFDrf.AskArrowData
-
- arrowWidth - Variable in class nxopen.uf.UFDrf.ArrowInfo
-
- ARRUDABOYCE - Static variable in class nxopen.PhysicalMaterial.Type
-
Arruda-Boyce
- ARRUDABOYCETESTDATA - Static variable in class nxopen.PhysicalMaterial.Type
-
Arruda-Boyce - test data option
- ARTICULATION - Static variable in class nxopen.motion.DriverOperation.Type
-
Articulation
- ARTICULATION - Static variable in class nxopen.motion.MotionSolutionBuilder.SolutionTypes
-
Articulation run
- ARTICULATION_INPUT - Static variable in class nxopen.uf.UFMotion.JointMotionInputType
-
- ArticulationControl - Interface in nxopen.motion
-
Represents the
ArticulationControl
An instance of this class can not be obtained
Created in NX9.0.0
- ArticulationControl.ArticulationJointsDisplacementData - Class in nxopen.motion
-
- ArticulationJointsDisplacementData() - Constructor for class nxopen.motion.ArticulationControl.ArticulationJointsDisplacementData
-
- articulationRun() - Method in interface nxopen.uf.UFMotion
-
- articulationSolve(int, Joint[], double[], Unit[]) - Method in interface nxopen.motion.ArticulationControl
-
Articulation solve with joint driver step size and number of step as input
This method adds event loop that solves step by step and return.
- articulationSolve(Joint[], double[], Unit[]) - Method in interface nxopen.motion.ArticulationControl
-
Articulation solve with joint driver displacement as input
License requirements: mechanisms ("MECHANISMS")
.
- AS - Static variable in class nxopen.ame.EditClauseBuilder.Operator
-
- AS_DESIGNED - Static variable in class nxopen.formboard.FormboardLayoutBuilder.BranchAngle
-
Use the angle equal to the 3D angle
of the branch in the 3D harness.
- AS_DISPLAYED - Static variable in class nxopen.CGMBuilder.Color
-
As Displayed
- AS_DISPLAYED - Static variable in class nxopen.PlotColorsWidthsBuilder.Color
-
As Displayed
- AS_DISPLAYED - Static variable in class nxopen.PrintPDFBuilder.Color
-
As Displayed
- AS_DISPLAYED_COLORS - Static variable in class nxopen.uf.UFCgm.Colors
-
- AS_DISPLAYED_COLORS - Static variable in class nxopen.uf.UFPlot.Colors
-
- AS_ID - Static variable in class nxopen.pdm.PartOperationImportBuilder.ConversionRule
-
- AS_IDAND_REVISION - Static variable in class nxopen.pdm.PartOperationImportBuilder.ConversionRule
-
- AS_INTERFACE - Static variable in class nxopen.ame.BusInterfaceType
-
- AS_LEVEL - Static variable in class nxopen.cam.RoughTurningBuilder.ReversalModeTypes
-
Reversal mode: As Level
- AS_PER_EVENT - Static variable in class nxopen.cae.DurabilityEvaluateFatigueHistoryBuilder.FatigueHistoryDataTypeEnum
-
- AS_RECORDED - Static variable in class nxopen.MovieSettingsBuilder.PlaybackSpeedChoices
-
Specifies playback speed same as record speed
- AS_REQUIRED - Static variable in class nxopen.assemblies.AssembliesGeneralPropertiesBuilder.QuantityOptions
-
Sets the as-required quantity on this component.
- AS_REQUIRED - Static variable in class nxopen.assemblies.ComponentQuantity
-
Quantity As required.
- AS_SAVED - Static variable in class nxopen.LoadOptions.LoadMethod
-
use same directory in which they were saved
- AS_SAVED - Static variable in class nxopen.LoadOptions.ManagedModeLoadMethod
-
use assembly structure in the part file for load
- AS_SAVED - Static variable in class nxopen.pdm.ConfigurationContextBuilder.ConfigContextType
-
- AS_SPECIFIED - Static variable in class nxopen.assemblies.CreateNewComponentBuilder.ComponentLayerOptionType
-
Set the layer option type to as specified
- AS_SPECIFIED - Static variable in class nxopen.assemblies.DesignElementBuilder.LayerOptionType
-
As specified layer
- AS_SPECIFIED - Static variable in class nxopen.assemblies.DesignElementBuilder.PositioningOption
-
Applies the specified position on the design elements
- AS_SPECIFIED - Static variable in class nxopen.assemblies.DesignElementBuilder.ReferenceSetType
-
As specified reference set
- AS_SPECIFIED - Static variable in class nxopen.assemblies.ReplaceComponentBuilder.ComponentLayerOption
-
Set the specified layer
- AS_SPECIFIED - Static variable in class nxopen.assemblies.ReplaceComponentBuilder.ComponentNameOption
-
Set the specified component name
- AS_SPECIFIED - Static variable in class nxopen.cam.NcmctPartMountingBuilder.LayerTypes
-
As Specified
- AS_SPECIFIED - Static variable in class nxopen.features.MoveObjectBuilder.LayerOptionType
-
As Specified Layer
- AS_SPECIFIED - Static variable in class nxopen.JtCreator.RefsetOption
-
AS_SPECIFIED
- AS_SPECIFIED - Static variable in class nxopen.tooling.AddReusableFeatureBuilder.LayerOptionType
-
As Specified Layer
- AS_ZERO - Static variable in class nxopen.annotations.ZeroToleranceDisplayStyle
-
Always display zero tolerance as 0
- ASCENDING - Static variable in class nxopen.ame.SortingBlockBuilder.Order
-
- ASCENDING - Static variable in class nxopen.blockstyler.Tree.ColumnSortOption
-
Ascending
- ASCENDING - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.SortOrderType
-
Sort ascending
- ASCENDING - Static variable in class nxopen.tooling.BomListBuilder.BomListSortOption
-
Ascending
- ASCII - Static variable in class nxopen.cae.Post.Export
-
- ASCII - Static variable in class nxopen.preferences.SessionUserInterface.JournalFileFormatType
-
Ascii
- ASCII - Static variable in class nxopen.STLImporter.FileFormatType
-
STL file is in ASCII format.
- ASCIIDiffTolerances() - Constructor for class nxopen.cae.Post.ASCIIDiffTolerances
-
- ASCIIDiffTolerances(double, double, double, double, double, double) - Constructor for class nxopen.cae.Post.ASCIIDiffTolerances
-
Constructor for the ASCIIDiffTolerances object.
- ASCImporter - Interface in nxopen
-
- ASCImporter.Units - Class in nxopen
-
The Part Units selection Enum
- ASH_GRAY_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- ASIG2000 - Static variable in class nxopen.annotations.DatumTargetBuilder.StandardTypes
-
ASIG_2000
- ASK - Static variable in class nxopen.preferences.SessionModeling.DeleteChildFeaturesOptionType
-
Ask user "Do you want to delete child features?"
- ask2d3dElementCentroids(FEElement[], CoordinateSystem) - Method in interface nxopen.cae.ElementInfoUtils
-
Returns the centroids of 2D and 3d finite elements in absolute or reference coordinate system.
- ask2dContact(Tag) - Method in interface nxopen.uf.UFMotion
-
- ask2dElementAreas(FEElement[]) - Method in interface nxopen.cae.ElementInfoUtils
-
Returns the areas of the 2D finite elements.
- ask2dElementNormals(FEElement[]) - Method in interface nxopen.cae.ElementInfoUtils
-
Returns the normals of the 2D finite elements.
- ask2dtrimBsurf(Tag, int[], double) - Method in interface nxopen.uf.UFModlGeneral
-
- Ask2dtrimBsurfData() - Constructor for class nxopen.uf.UFModlGeneral.Ask2dtrimBsurfData
-
- ask2dValue(Tag, int) - Method in interface nxopen.uf.UFParam
-
- ask3dContact(Tag) - Method in interface nxopen.uf.UFMotion
-
- ask3dContactMethod() - Method in interface nxopen.uf.UFMotion
-
- Ask3dContactMethodData() - Constructor for class nxopen.uf.UFMotion.Ask3dContactMethodData
-
- ask3dElementVolumes(FEElement[]) - Method in interface nxopen.cae.ElementInfoUtils
-
Returns the volumes of the 3D finite elements.
- ask3dValue(Tag, int) - Method in interface nxopen.uf.UFParam
-
- ask3ScalarsOfPoint(Tag) - Method in interface nxopen.uf.UFSo
-
- ASK_ALL - Static variable in class nxopen.uf.UFKf.ClassType
-
- ASK_AT_RUN_TIME - Static variable in class nxopen.drawings.TrackDrawingChangesGeneralBuilder.SnapshotDataToUseType
-
This option tells to show messages at rumtime
- ASK_SYSTEM_ONLY - Static variable in class nxopen.uf.UFKf.ClassType
-
- ASK_TO_OVERWRITE_FILE - Static variable in class nxopen.routing.CustomManager.PipingComponentFileOptions
-
Prompt the user of the plugin if it is OK to overwrite the piping component file.
- ASK_USER_ONLY - Static variable in class nxopen.uf.UFKf.ClassType
-
- askAccelerationResults(Tag, UFMotion.MotionType, UFMotion.VectorComponent, UFMotion.ReferenceFrame) - Method in interface nxopen.uf.UFMotion
-
- AskAccelerationResultsData() - Constructor for class nxopen.uf.UFMotion.AskAccelerationResultsData
-
- askAccessibilityVectors(Tag, UFVariant) - Method in interface nxopen.uf.UFFbmGeom
-
- AskAccessibilityVectorsData() - Constructor for class nxopen.uf.UFFbmGeom.AskAccessibilityVectorsData
-
- askAction(String) - Method in interface nxopen.uf.UFClone
-
- askActiveArrangement(Tag) - Method in interface nxopen.uf.UFAssem
-
- askActiveSequence() - Method in interface nxopen.uf.UFAssem
-
- askActiveSketch() - Method in interface nxopen.uf.UFSket
-
- askActiveSolution() - Method in interface nxopen.uf.UFMotion
-
- askActiveSolutionNx() - Method in interface nxopen.uf.UFSf
-
- askActiveStepNx() - Method in interface nxopen.uf.UFSf
-
- askAdjacentFacet(Tag, int, int) - Method in interface nxopen.uf.UFFacet
-
- AskAdjacentFacetData() - Constructor for class nxopen.uf.UFFacet.AskAdjacentFacetData
-
- askAdjacFaces(Tag) - Method in interface nxopen.uf.UFModeling
-
- askAliveEdge(Tag) - Method in interface nxopen.uf.UFModeling
-
- askAliveFace(Tag) - Method in interface nxopen.uf.UFModeling
-
- askAllClasses() - Method in interface nxopen.uf.UFKf
-
- AskAllClassesData() - Constructor for class nxopen.uf.UFKf.AskAllClassesData
-
- askAllCompCset(Tag) - Method in interface nxopen.uf.UFAssem
-
- askAllDirectMembers() - Method in interface nxopen.ReferenceSet
-
Query of reference set members.
- askAllMembersOfSet(Tag) - Method in interface nxopen.uf.UFModeling
-
- AskAllMembersOfSetData() - Constructor for class nxopen.uf.UFModeling.AskAllMembersOfSetData
-
- askAllOwningGroups(Tag) - Method in interface nxopen.uf.UFGroup
-
- AskAllOwningGroupsData() - Constructor for class nxopen.uf.UFGroup.AskAllOwningGroupsData
-
- askAllPartOccChildren(Tag) - Method in interface nxopen.uf.UFAssem
-
- AskAllPartOccChildrenData() - Constructor for class nxopen.uf.UFAssem.AskAllPartOccChildrenData
-
- AskAllPartOccChildrenReturn - Variable in class nxopen.uf.UFAssem.AskAllPartOccChildrenData
-
- askAllPolygonBodies() - Method in interface nxopen.uf.UFSf
-
- AskAllPolygonBodiesData() - Constructor for class nxopen.uf.UFSf.AskAllPolygonBodiesData
-
- askAnalysisDisplay(Tag) - Method in interface nxopen.uf.UFCurve
-
- askAnalysisMode(Tag) - Method in interface nxopen.uf.UFClear
-
- askAncestorClasses(String) - Method in interface nxopen.uf.UFKf
-
- AskAncestorClassesData() - Constructor for class nxopen.uf.UFKf.AskAncestorClassesData
-
- askAnchorPosition(Tag) - Method in interface nxopen.uf.UFRoute
-
- askAnchorStock(Tag) - Method in interface nxopen.uf.UFRoute
-
- AskAnchorStock() - Constructor for class nxopen.uf.UFRoute.AskAnchorStock
-
- askAnchorStockData(Tag) - Method in interface nxopen.uf.UFRoute
-
- AskAnchorStockData() - Constructor for class nxopen.uf.UFRoute.AskAnchorStockData
-
- askAngleEdge(Tag, Tag, int) - Method in interface nxopen.uf.UFModeling
-
- AskAngleEdgeData() - Constructor for class nxopen.uf.UFModeling.AskAngleEdgeData
-
- askAngleParms(Tag) - Method in interface nxopen.uf.UFGexp
-
- AskAngleParmsData() - Constructor for class nxopen.uf.UFGexp.AskAngleParmsData
-
- askAngleTolerance() - Method in interface nxopen.uf.UFModeling
-
- askAngObjSuppressZeros(Tag) - Method in interface nxopen.uf.UFDrf
-
- askAngObjUnitsFormat(Tag) - Method in interface nxopen.uf.UFDrf
-
- AskAngObjUnitsFormatData() - Constructor for class nxopen.uf.UFDrf.AskAngObjUnitsFormatData
-
- askAngularUnits() - Method in interface nxopen.uf.UFMotion
-
- askAnnArcSegAngles(int, int) - Method in interface nxopen.uf.UFDrf
-
- AskAnnArcSegAnglesData() - Constructor for class nxopen.uf.UFDrf.AskAnnArcSegAnglesData
-
- askAnnData(Tag, int[], int, int[]) - Method in interface nxopen.uf.UFDrf
-
- AskAnnData() - Constructor for class nxopen.uf.UFDrf.AskAnnData
-
- askAnnLineSegEnds(int, int[]) - Method in interface nxopen.uf.UFDrf
-
- AskAnnLineSegEndsData() - Constructor for class nxopen.uf.UFDrf.AskAnnLineSegEndsData
-
- askAnnotationTags(Tag) - Method in interface nxopen.uf.UFGdt
-
- askAnnotationTemplate() - Method in interface nxopen.uf.UFDrf
-
- askAnnotationTextBox(Tag) - Method in interface nxopen.uf.UFDrf
-
- AskAnnotationTextBoxData() - Constructor for class nxopen.uf.UFDrf.AskAnnotationTextBoxData
-
- askAnyMarkExist(UFUndo.UserVisibility) - Method in interface nxopen.uf.UFUndo
-
- askAppendedText(Tag) - Method in interface nxopen.uf.UFDrf
-
- askAppendedText(Tag, UFGdt.TextLocation) - Method in interface nxopen.uf.UFGdt
-
- AskAppendedTextData() - Constructor for class nxopen.uf.UFDrf.AskAppendedTextData
-
- AskAppendedTextData() - Constructor for class nxopen.uf.UFGdt.AskAppendedTextData
-
- askApplicationModule() - Method in interface nxopen.uf.UF
-
- askAppViewCorners(UFVariant) - Method in interface nxopen.uf.UFRoute
-
- askAppViewCurves(UFVariant) - Method in interface nxopen.uf.UFRoute
-
- askAppViewDefStock(UFVariant) - Method in interface nxopen.uf.UFRoute
-
- AskAppViewDefStockData() - Constructor for class nxopen.uf.UFRoute.AskAppViewDefStockData
-
- askAppViewDefStyle(UFVariant) - Method in interface nxopen.uf.UFRoute
-
- askAppViewDesc(UFVariant) - Method in interface nxopen.uf.UFRoute
-
- askAppViewExtPlib(UFVariant) - Method in interface nxopen.uf.UFRoute
-
- AskAppViewExtPlibData() - Constructor for class nxopen.uf.UFRoute.AskAppViewExtPlibData
-
- askAppViewFabCharx(UFVariant) - Method in interface nxopen.uf.UFRoute
-
- AskAppViewFabCharxData() - Constructor for class nxopen.uf.UFRoute.AskAppViewFabCharxData
-
- askAppViewFilename(UFVariant) - Method in interface nxopen.uf.UFRoute
-
- askAppViewName(UFVariant) - Method in interface nxopen.uf.UFRoute
-
- askAppViewOptCharx(UFVariant) - Method in interface nxopen.uf.UFRoute
-
- AskAppViewOptCharxData() - Constructor for class nxopen.uf.UFRoute.AskAppViewOptCharxData
-
- askAppViewPlibType(UFVariant) - Method in interface nxopen.uf.UFRoute
-
- askAppViewReqCharx(UFVariant) - Method in interface nxopen.uf.UFRoute
-
- AskAppViewReqCharxData() - Constructor for class nxopen.uf.UFRoute.AskAppViewReqCharxData
-
- askArc(UFVariant) - Method in interface nxopen.uf.UFEval
-
- askArcData(Tag) - Method in interface nxopen.uf.UFCurve
-
- askArcLength(Tag, double, double, UFModl.Units) - Method in interface nxopen.uf.UFCurve
-
- askAreafillData(Tag) - Method in interface nxopen.uf.UFDrf
-
- askArrangementsInPart(Tag) - Method in interface nxopen.uf.UFAssem
-
- AskArrangementsInPartData() - Constructor for class nxopen.uf.UFAssem.AskArrangementsInPartData
-
- askArraysInPart(Tag) - Method in interface nxopen.uf.UFAssem
-
- AskArraysInPartData() - Constructor for class nxopen.uf.UFAssem.AskArraysInPartData
-
- askArraysOfInst(Tag) - Method in interface nxopen.uf.UFAssem
-
- AskArraysOfInstData() - Constructor for class nxopen.uf.UFAssem.AskArraysOfInstData
-
- askArrowData(int[]) - Method in interface nxopen.uf.UFDrf
-
- AskArrowData() - Constructor for class nxopen.uf.UFDrf.AskArrowData
-
- askArticStepSize(Tag) - Method in interface nxopen.uf.UFMotion
-
- askArticulationStopTolerance() - Method in interface nxopen.uf.UFMotion
-
- askAssemLoadOptions() - Method in interface nxopen.uf.UFAssem
-
- askAssemOptions() - Method in interface nxopen.uf.UFAssem
-
- askAssocDoubleArray(UFVariant, String, String) - Method in interface nxopen.uf.UFMom
-
- askAssocExp(Tag) - Method in interface nxopen.uf.UFDrf
-
- askAssocFileCopy(String) - Method in interface nxopen.uf.UFClone
-
- askAssocFileDir(String) - Method in interface nxopen.uf.UFClone
-
- askAssocFileRootDir() - Method in interface nxopen.uf.UFClone
-
- askAssociatedDatums(Tag) - Method in interface nxopen.uf.UFGdt
-
- AskAssociatedDatumsData() - Constructor for class nxopen.uf.UFGdt.AskAssociatedDatumsData
-
- askAssociateRequests(PenetrationRequest) - Method in interface nxopen.features.shipdesign.PenetrationUtils
-
Ask the associate requests
License requirements: nx_penetration_mgmt ("Penetration Management")
.
- askAssociationType(Tag, UFGdt.DatumAssocType) - Method in interface nxopen.uf.UFGdt
-
- askAssociativeOrigin(Tag) - Method in interface nxopen.uf.UFDrf
-
- AskAssociativeOriginData() - Constructor for class nxopen.uf.UFDrf.AskAssociativeOriginData
-
- askAssociativityData(Tag) - Method in interface nxopen.uf.UFDrf
-
- AskAssociativityData() - Constructor for class nxopen.uf.UFDrf.AskAssociativityData
-
- askAssocIntArray(UFVariant, String, String) - Method in interface nxopen.uf.UFMom
-
- askAssocStringArray(UFVariant, String, String) - Method in interface nxopen.uf.UFMom
-
- askAssyCtxtPartOcc(Tag, Tag) - Method in interface nxopen.uf.UFSo
-
- ASKAT_RUNTIME - Static variable in class nxopen.drawings.VisualDrawingComparePrefsBuilder.VisualDrawingComparePrefsOverlayDataToUse
-
This option tells to show messages at rumtime
- askAttachedRows(Tag) - Method in interface nxopen.uf.UFPlist
-
- AskAttachedRowsData() - Constructor for class nxopen.uf.UFPlist.AskAttachedRowsData
-
- askAttachLogFile(boolean[]) - Method in interface nxopen.uf.UFClone
-
- askAttachments(PenetrationFolder, String) - Method in interface nxopen.features.shipdesign.PenetrationUtils
-
Get the attachments in folder
License requirements: nx_penetration_mgmt ("Penetration Management")
.
- askAttachmentsOfType(Tag, int, int) - Method in interface nxopen.uf.UFMotion
-
- AskAttachmentsOfTypeData() - Constructor for class nxopen.uf.UFMotion.AskAttachmentsOfTypeData
-
- askAttributeData(Tag) - Method in interface nxopen.uf.UFFam
-
- askAttributes(UFVariant) - Method in interface nxopen.uf.UFMfm
-
- AskAttributesData() - Constructor for class nxopen.uf.UFMfm.AskAttributesData
-
- askAttributeType(UFVariant, String) - Method in interface nxopen.uf.UFMfm
-
- askAutoAddNewComps(Tag) - Method in interface nxopen.uf.UFAssem
-
- askAutoBlank(Tag) - Method in interface nxopen.uf.UFCam
-
- AskAutoBlankData() - Constructor for class nxopen.uf.UFCam.AskAutoBlankData
-
- askAutolockStatus() - Method in interface nxopen.uf.UFUgmgr
-
- askAutoUpdate(Tag) - Method in interface nxopen.uf.UFDraw
-
- askAvailableCriteria(Tag) - Method in interface nxopen.uf.UFFbmGeom
-
- AskAvailableCriteriaData() - Constructor for class nxopen.uf.UFFbmGeom.AskAvailableCriteriaData
-
- askAvailableSolid(Tag) - Method in interface nxopen.uf.UFFacet
-
- askAvailableVariantRules(String, String) - Method in interface nxopen.pdm.VariantConfigurationBuilder
-
Returns the saved variant rules for the give context ID
The input contextId:
In case of default domain: it should be Teamcenter item ID.
- askAxisDofJunction(UFVariant, String) - Method in interface nxopen.uf.UFSim
-
- AskAxisDofJunctionData() - Constructor for class nxopen.uf.UFSim.AskAxisDofJunctionData
-
- askAxisIsReversalAllowed(UFVariant, String) - Method in interface nxopen.uf.UFSim
-
- askAxisLimits(UFVariant, String) - Method in interface nxopen.uf.UFSim
-
- AskAxisLimitsData() - Constructor for class nxopen.uf.UFSim.AskAxisLimitsData
-
- askAxisPosition(UFVariant, String) - Method in interface nxopen.uf.UFSim
-
- askAxisRotaryDirMode(UFVariant, String) - Method in interface nxopen.uf.UFSim
-
- askBallGrooveParms(Tag, int) - Method in interface nxopen.uf.UFModlFeatures
-
- AskBallGrooveParmsData() - Constructor for class nxopen.uf.UFModlFeatures.AskBallGrooveParmsData
-
- askBallSlotParms(Tag, int) - Method in interface nxopen.uf.UFModl
-
- AskBallSlotParmsData() - Constructor for class nxopen.uf.UFModl.AskBallSlotParmsData
-
- askBaseUnitOfMeasure(String) - Method in interface nxopen.uf.UFKf
-
- askBaseViewOfViewSet(Tag) - Method in interface nxopen.uf.UFView
-
- askBcDescriptorNameNx(Tag) - Method in interface nxopen.uf.UFSfl
-
- askBcDescriptorNx(Tag, String) - Method in interface nxopen.uf.UFSfl
-
- askBCsByFilter(boolean, boolean, boolean, String) - Method in interface nxopen.cae.BCSelectionDisplayBuilder
-
Return the BCs in the active solution using the specified filters
License requirements: None.
- askBeamData(FEElement) - Method in interface nxopen.cae.ElementAssociatedDataUtils
-
Returns beam element associated data.
- AskBeamData() - Constructor for class nxopen.cae.ElementAssociatedDataUtils.AskBeamData
-
- askBeamEndMass(Tag) - Method in interface nxopen.uf.UFSf
-
- AskBeamEndMassData() - Constructor for class nxopen.uf.UFSf.AskBeamEndMassData
-
- askBendAllowanceFormula(Tag) - Method in interface nxopen.uf.UFModlSmd
-
- askBendLineData(Tag) - Method in interface nxopen.uf.UFSmd
-
- AskBendLineData() - Constructor for class nxopen.uf.UFSmd.AskBendLineData
-
- askBendLines(Tag) - Method in interface nxopen.uf.UFSmd
-
- AskBendLinesData() - Constructor for class nxopen.uf.UFSmd.AskBendLinesData
-
- askBendOperation(Tag) - Method in interface nxopen.uf.UFModlSmd
-
- askBendRadius(Tag) - Method in interface nxopen.uf.UFRoute
-
- askBendRcp(Tag) - Method in interface nxopen.uf.UFRoute
-
- askBendSegment(Tag) - Method in interface nxopen.uf.UFRoute
-
- askBendTanLines(Tag) - Method in interface nxopen.uf.UFSmd
-
- AskBendTanLinesData() - Constructor for class nxopen.uf.UFSmd.AskBendTanLinesData
-
- askBlankMatlDbObject() - Method in interface nxopen.uf.UFCam
-
- askBlendParms(Tag, int) - Method in interface nxopen.uf.UFModlFeatures
-
- askBlockParms(Tag, int) - Method in interface nxopen.uf.UFModlFeatures
-
- askBodiesOfAssemblyCut(Tag) - Method in interface nxopen.uf.UFAssem
-
- AskBodiesOfAssemblyCutData() - Constructor for class nxopen.uf.UFAssem.AskBodiesOfAssemblyCutData
-
- askBodyBoundaries(Tag) - Method in interface nxopen.uf.UFModeling
-
- AskBodyBoundariesData() - Constructor for class nxopen.uf.UFModeling.AskBodyBoundariesData
-
- askBodyConsistency(Tag) - Method in interface nxopen.uf.UFModeling
-
- AskBodyConsistencyData() - Constructor for class nxopen.uf.UFModeling.AskBodyConsistencyData
-
- askBodyDensity(Tag, UFModl.DensityUnits) - Method in interface nxopen.uf.UFModeling
-
- askBodyEdges(Tag) - Method in interface nxopen.uf.UFModeling
-
- askBodyFaces(Tag) - Method in interface nxopen.uf.UFModeling
-
- askBodyFeats(Tag) - Method in interface nxopen.uf.UFModeling
-
- askBodyId(Tag) - Method in interface nxopen.uf.UFWeld
-
- AskBodyIdData() - Constructor for class nxopen.uf.UFWeld.AskBodyIdData
-
- askBodySilsInView(Tag, Tag) - Method in interface nxopen.uf.UFDraw
-
- AskBodySilsInViewData() - Constructor for class nxopen.uf.UFDraw.AskBodySilsInViewData
-
- askBodyStructures(Tag) - Method in interface nxopen.uf.UFModeling
-
- AskBodyStructuresData() - Constructor for class nxopen.uf.UFModeling.AskBodyStructuresData
-
- askBodyType(Tag) - Method in interface nxopen.uf.UFModeling
-
- askBodyTypePref() - Method in interface nxopen.uf.UFModeling
-
- askBoolean(UFVariant) - Method in interface nxopen.uf.UFKf
-
- askBoolean(UFVariant, String) - Method in interface nxopen.uf.UFUde
-
- askBooleanWithRetainedOptions(Tag) - Method in interface nxopen.uf.UFModeling
-
- AskBooleanWithRetainedOptionsData() - Constructor for class nxopen.uf.UFModeling.AskBooleanWithRetainedOptionsData
-
- askBorderColor() - Method in interface nxopen.uf.UFDraw
-
- askBorderDisplay() - Method in interface nxopen.uf.UFDraw
-
- askBossParms(Tag, int) - Method in interface nxopen.uf.UFModlFeatures
-
- AskBossParmsData() - Constructor for class nxopen.uf.UFModlFeatures.AskBossParmsData
-
- askBoundaries(Tag, UFCam.GeomType) - Method in interface nxopen.uf.UFCambnd
-
- askBoundaries(Tag) - Method in interface nxopen.uf.UFDrf
-
- AskBoundariesData() - Constructor for class nxopen.uf.UFCambnd.AskBoundariesData
-
- AskBoundariesData() - Constructor for class nxopen.uf.UFDrf.AskBoundariesData
-
- askBoundaryAppData(UFVariant) - Method in interface nxopen.uf.UFCambnd
-
- askBoundaryCurves(Tag) - Method in interface nxopen.uf.UFDraw
-
- AskBoundaryCurvesData() - Constructor for class nxopen.uf.UFDraw.AskBoundaryCurvesData
-
- askBoundaryData(Tag) - Method in interface nxopen.uf.UFBound
-
- askBoundaryData(UFVariant) - Method in interface nxopen.uf.UFCambnd
-
- askBoundaryItems(UFVariant) - Method in interface nxopen.uf.UFCambnd
-
- AskBoundaryItemsData() - Constructor for class nxopen.uf.UFCambnd.AskBoundaryItemsData
-
- askBoundaryType(Tag) - Method in interface nxopen.uf.UFDraw
-
- askBoundByObjects(Tag) - Method in interface nxopen.uf.UFDraw
-
- AskBoundByObjectsData() - Constructor for class nxopen.uf.UFDraw.AskBoundByObjectsData
-
- askBoundingBox(Tag) - Method in interface nxopen.uf.UFModlGeneral
-
- askBoundingBoxAligned(Tag, Tag, boolean) - Method in interface nxopen.uf.UFModlGeneral
-
- AskBoundingBoxAlignedData() - Constructor for class nxopen.uf.UFModlGeneral.AskBoundingBoxAlignedData
-
- askBoundingBoxExact(Tag, Tag) - Method in interface nxopen.uf.UFModlGeneral
-
- AskBoundingBoxExactData() - Constructor for class nxopen.uf.UFModlGeneral.AskBoundingBoxExactData
-
- askBoxOfAssy(Tag) - Method in interface nxopen.uf.UFFltr
-
- AskBoxOfAssyData() - Constructor for class nxopen.uf.UFFltr.AskBoxOfAssyData
-
- askBoxZone(Tag) - Method in interface nxopen.uf.UFFltr
-
- AskBoxZoneData() - Constructor for class nxopen.uf.UFFltr.AskBoxZoneData
-
- askBplane(Tag) - Method in interface nxopen.uf.UFModlFeatures
-
- AskBplaneData() - Constructor for class nxopen.uf.UFModlFeatures.AskBplaneData
-
- askBreakoutData(Tag) - Method in interface nxopen.uf.UFDraw
-
- AskBreakoutData() - Constructor for class nxopen.uf.UFDraw.AskBreakoutData
-
- askBreakRegionData(Tag) - Method in interface nxopen.uf.UFDraw
-
- askBreakRegions(Tag) - Method in interface nxopen.uf.UFDraw
-
- AskBreakRegionsData() - Constructor for class nxopen.uf.UFDraw.AskBreakRegionsData
-
- askBridgeFeature(Tag, UFCurve.BridgeData) - Method in interface nxopen.uf.UFCurve
-
- askBrokenLinkSourcePart(Tag) - Method in interface nxopen.uf.UFWave
-
- AskBrokenLinkSourcePartData() - Constructor for class nxopen.uf.UFWave.AskBrokenLinkSourcePartData
-
- askBsurf(Tag) - Method in interface nxopen.uf.UFModlGeneral
-
- askBsurfKnotDisplay(Tag) - Method in interface nxopen.uf.UFModlGeneral
-
- askBsurfPoleDisplay(Tag) - Method in interface nxopen.uf.UFModlGeneral
-
- askBuiltInPathObjs(Tag) - Method in interface nxopen.uf.UFRoute
-
- AskBuiltInPathObjsData() - Constructor for class nxopen.uf.UFRoute.AskBuiltInPathObjsData
-
- askBuiltInPaths(Tag) - Method in interface nxopen.uf.UFRoute
-
- AskBuiltInPathsData() - Constructor for class nxopen.uf.UFRoute.AskBuiltInPathsData
-
- askBushingData(FEElement, Point3d, Point3d, Point3d) - Method in interface nxopen.cae.ElementAssociatedDataUtils
-
Returns bushing element associated data.
- AskBushingData() - Constructor for class nxopen.cae.ElementAssociatedDataUtils.AskBushingData
-
- askBusinessProcessModifierData(Tag) - Method in interface nxopen.uf.UFPd
-
- askBusinessProcessModifiers(Tag) - Method in interface nxopen.uf.UFPd
-
- AskBusinessProcessModifiersData() - Constructor for class nxopen.uf.UFPd.AskBusinessProcessModifiersData
-
- askBusinessProcessModifierType(Tag) - Method in interface nxopen.uf.UFPd
-
- askButtonId(String) - Method in interface nxopen.uf.UFMb
-
- askButtonSensitivity(int) - Method in interface nxopen.uf.UFMb
-
- askButtonTypeName(char) - Method in interface nxopen.uf.UFMb
-
- askCalloutOfAnnotation(Tag) - Method in interface nxopen.uf.UFDrf
-
- askCalloutRowMembers(Tag, int) - Method in interface nxopen.uf.UFDrf
-
- AskCalloutRowMembersData() - Constructor for class nxopen.uf.UFDrf.AskCalloutRowMembersData
-
- askCalloutStrings(Tag) - Method in interface nxopen.uf.UFGdt
-
- AskCalloutStringsData() - Constructor for class nxopen.uf.UFGdt.AskCalloutStringsData
-
- askCamPreferences() - Method in interface nxopen.uf.UFCam
-
- askCandidateMachiningFeatureTypes(int, Tag[]) - Method in interface nxopen.uf.UFMfm
-
- AskCandidateMachiningFeatureTypesData() - Constructor for class nxopen.uf.UFMfm.AskCandidateMachiningFeatureTypesData
-
- askCategoryInfo(Tag) - Method in interface nxopen.uf.UFLayer
-
- askCategoryTag(String) - Method in interface nxopen.uf.UFLayer
-
- askCBoreHoleParms(Tag, int) - Method in interface nxopen.uf.UFModlFeatures
-
- AskCBoreHoleParmsData() - Constructor for class nxopen.uf.UFModlFeatures.AskCBoreHoleParmsData
-
- askCellAtRowCol(Tag, Tag) - Method in interface nxopen.uf.UFTabnot
-
- askCellPrefs(Tag) - Method in interface nxopen.uf.UFTabnot
-
- askCellText(Tag) - Method in interface nxopen.uf.UFTabnot
-
- askCellTextPosition(Tag) - Method in interface nxopen.uf.UFTabnot
-
- askCenter(Tag) - Method in interface nxopen.uf.UFView
-
- askCenterlineInfo(Tag) - Method in interface nxopen.uf.UFDrf
-
- AskCenterlineInfoData() - Constructor for class nxopen.uf.UFDrf.AskCenterlineInfoData
-
- askCentroid(Tag) - Method in interface nxopen.uf.UFCurve
-
- askChamferDimensionData(Tag) - Method in interface nxopen.uf.UFDrf
-
- askChamferParms(Tag, int) - Method in interface nxopen.uf.UFModeling
-
- AskChamferParmsData() - Constructor for class nxopen.uf.UFModeling.AskChamferParmsData
-
- askCharacteristic(Tag) - Method in interface nxopen.uf.UFGdt
-
- askChildOfInstance(Tag) - Method in interface nxopen.uf.UFAssem
-
- askChildPipNodes(Tag) - Method in interface nxopen.uf.UFSmd
-
- AskChildPipNodesData() - Constructor for class nxopen.uf.UFSmd.AskChildPipNodesData
-
- askChildren(Tag, int) - Method in interface nxopen.uf.UFSo
-
- AskChildrenData() - Constructor for class nxopen.uf.UFSo.AskChildrenData
-
- askChildrenFeatures(Tag) - Method in interface nxopen.uf.UFProcessAid
-
- AskChildrenFeaturesData() - Constructor for class nxopen.uf.UFProcessAid.AskChildrenFeaturesData
-
- askChildrenOrder(Component) - Method in interface nxopen.assemblies.ComponentOrder
-
Given a parent
Component
this method
returns immediate child
Component
s in the same order in
which they are ordered in this
ComponentOrder
License requirements: None.
- askCi(String) - Method in interface nxopen.uf.UFClone
-
- askCiCommentChecking(String) - Method in interface nxopen.uf.UFClone
-
- AskCiCommentCheckingData() - Constructor for class nxopen.uf.UFClone.AskCiCommentCheckingData
-
- askCircularIsetParms(Tag, int) - Method in interface nxopen.uf.UFModlGeneral
-
- AskCircularIsetParmsData() - Constructor for class nxopen.uf.UFModlGeneral.AskCircularIsetParmsData
-
- askCircularPatternFace(Tag) - Method in interface nxopen.uf.UFModlFeatures
-
- AskCircularPatternFaceData() - Constructor for class nxopen.uf.UFModlFeatures.AskCircularPatternFaceData
-
- askClassCount() - Method in interface nxopen.uf.UFFam
-
- askClassData(int) - Method in interface nxopen.uf.UFFam
-
- askClasses(UFKf.ClassType) - Method in interface nxopen.uf.UFKf
-
- AskClassesData() - Constructor for class nxopen.uf.UFKf.AskClassesData
-
- askClassName(int) - Method in interface nxopen.uf.UFFam
-
- askClearPlaneData(Tag) - Method in interface nxopen.uf.UFCam
-
- AskClearPlaneData() - Constructor for class nxopen.uf.UFCam.AskClearPlaneData
-
- askClearPlaneStatus(Tag) - Method in interface nxopen.uf.UFCam
-
- askClearPlaneTag(Tag) - Method in interface nxopen.uf.UFCam
-
- askClearPlaneUsage(Tag) - Method in interface nxopen.uf.UFCam
-
- askCloneRelatedCae() - Method in interface nxopen.uf.UFClone
-
- askCloneRelatedDwgs() - Method in interface nxopen.uf.UFClone
-
- askClosestColor(int, double[], int) - Method in interface nxopen.uf.UFDisp
-
- askClosestColorInDisplayedPart(UFDisp.ColorName) - Method in interface nxopen.uf.UFDisp
-
- askClosestColorInPart(Tag, UFDisp.ColorName) - Method in interface nxopen.uf.UFDisp
-
- askClosestPoint(double[], Tag) - Method in interface nxopen.uf.UFSf
-
- AskClosestPointData() - Constructor for class nxopen.uf.UFSf.AskClosestPointData
-
- askCnncEdges(Tag, double[]) - Method in interface nxopen.uf.UFModeling
-
- AskCnncEdgesData() - Constructor for class nxopen.uf.UFModeling.AskCnncEdgesData
-
- askCo(String) - Method in interface nxopen.uf.UFClone
-
- askCodeset() - Method in interface nxopen.uf.UF
-
- askCollectorItems(UFVariant) - Method in interface nxopen.uf.UFCamgeom
-
- AskCollectorItemsData() - Constructor for class nxopen.uf.UFCamgeom.AskCollectorItemsData
-
- askColor(int, int) - Method in interface nxopen.uf.UFDisp
-
- askColorCount() - Method in interface nxopen.uf.UFDisp
-
- AskColorData() - Constructor for class nxopen.uf.UFDisp.AskColorData
-
- askColPrefs(Tag) - Method in interface nxopen.uf.UFPlist
-
- askColumnHeadCfw(Tag, Tag) - Method in interface nxopen.uf.UFTabnot
-
- askColumnOfCell(Tag) - Method in interface nxopen.uf.UFTabnot
-
- askColumnSortData(Tag) - Method in interface nxopen.uf.UFTabnot
-
- askColumnWidth(Tag) - Method in interface nxopen.uf.UFTabnot
-
- askCombineCurves(Tag) - Method in interface nxopen.uf.UFCurve
-
- AskCombineCurvesData() - Constructor for class nxopen.uf.UFCurve.AskCombineCurvesData
-
- askCombinedLoadCase(Tag) - Method in interface nxopen.uf.UFSf
-
- AskCombinedLoadCaseData() - Constructor for class nxopen.uf.UFSf.AskCombinedLoadCaseData
-
- askCombinedLoadCases(Tag) - Method in interface nxopen.uf.UFSf
-
- AskCombinedLoadCasesData() - Constructor for class nxopen.uf.UFSf.AskCombinedLoadCasesData
-
- askCompExplosion(Tag, Tag) - Method in interface nxopen.uf.UFAssem
-
- AskCompExplosionData() - Constructor for class nxopen.uf.UFAssem.AskCompExplosionData
-
- askCompFromDof(UFVariant, String) - Method in interface nxopen.uf.UFSim
-
- askComplexFeature(Tag) - Method in interface nxopen.uf.UFGdt
-
- askComplexSubFeatures(Tag) - Method in interface nxopen.uf.UFGdt
-
- AskComplexSubFeaturesData() - Constructor for class nxopen.uf.UFGdt.AskComplexSubFeaturesData
-
- askComponentData(Tag) - Method in interface nxopen.uf.UFAssem
-
- AskComponentData() - Constructor for class nxopen.uf.UFAssem.AskComponentData
-
- askComponents() - Method in interface nxopen.cae.BaseResultType
-
Return all results components available for this result type
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- AskComponentsData() - Constructor for class nxopen.cae.BaseResultType.AskComponentsData
-
- askComponentToleranceIndex(Tag) - Method in interface nxopen.uf.UFGdt
-
- askCompositeDrf(Tag) - Method in interface nxopen.uf.UFGdt
-
- askCompPosition(Tag, Tag) - Method in interface nxopen.uf.UFAssem
-
- askCompressionFlags(Tag) - Method in interface nxopen.uf.UFPart
-
- askCompSectionInView(Tag, Tag) - Method in interface nxopen.uf.UFDraw
-
- askConeParms(Tag, int) - Method in interface nxopen.uf.UFModlFeatures
-
- AskConeParmsData() - Constructor for class nxopen.uf.UFModlFeatures.AskConeParmsData
-
- askConfigFile() - Method in interface nxopen.uf.UFCam
-
- askConfigRule() - Method in interface nxopen.uf.UFUgmgr
-
- askConfiguredRev(Tag) - Method in interface nxopen.uf.UFUgmgr
-
- askConicData(Tag) - Method in interface nxopen.uf.UFCurve
-
- askConIsInferred(Tag) - Method in interface nxopen.uf.UFSket
-
- askConnectedFaces() - Method in interface nxopen.weld.JointmarkBuilder
-
Find the connected face information.
- askConnectedParts(NXObject) - Method in interface nxopen.weld.CustomManager
-
Find the connected part information for the weld feature, curve, point or body.
- askConnectionPorts(Tag) - Method in interface nxopen.uf.UFRoute
-
- askConstraintClass(Tag) - Method in interface nxopen.uf.UFSket
-
- askConstraintEquationData(FEElement) - Method in interface nxopen.cae.ElementAssociatedDataUtils
-
Returns constraint element associated data.
- AskConstraintEquationData() - Constructor for class nxopen.cae.ElementAssociatedDataUtils.AskConstraintEquationData
-
- askConstraints(Tag) - Method in interface nxopen.uf.UFModlGeneral
-
- askConstraintsOfGeometry(Tag, Tag, UFSket.ConClass) - Method in interface nxopen.uf.UFSket
-
- AskConstraintsOfGeometryData() - Constructor for class nxopen.uf.UFSket.AskConstraintsOfGeometryData
-
- askConstraintsOfSketch(Tag, UFSket.ConClass) - Method in interface nxopen.uf.UFSket
-
- AskConstraintsOfSketchData() - Constructor for class nxopen.uf.UFSket.AskConstraintsOfSketchData
-
- askConstraintType(Tag) - Method in interface nxopen.uf.UFModlGeneral
-
- askConstraintType(Tag) - Method in interface nxopen.uf.UFSket
-
- askContourLines(Tag) - Method in interface nxopen.uf.UFSmd
-
- AskContourLinesData() - Constructor for class nxopen.uf.UFSmd.AskContourLinesData
-
- askControllingExp(Tag) - Method in interface nxopen.uf.UFDrf
-
- askControllingMemberOfCallout(Tag) - Method in interface nxopen.uf.UFDrf
-
- askCordingTol(UFVariant) - Method in interface nxopen.uf.UFSim
-
- askCostOfSequence(Tag) - Method in interface nxopen.uf.UFAssem
-
- askCostOfStep(Tag) - Method in interface nxopen.uf.UFAssem
-
- askCreatePartFilename(String, int) - Method in interface nxopen.uf.UFUi
-
- AskCreatePartFilenameData() - Constructor for class nxopen.uf.UFUi.AskCreatePartFilenameData
-
- askCreModVersions(Tag) - Method in interface nxopen.uf.UFObj
-
- AskCreModVersionsData() - Constructor for class nxopen.uf.UFObj.AskCreModVersionsData
-
- askCreSettings(int, int, int) - Method in interface nxopen.uf.UFObj
-
- askCrossCurves(Tag) - Method in interface nxopen.uf.UFRoute
-
- AskCrossCurvesData() - Constructor for class nxopen.uf.UFRoute.AskCrossCurvesData
-
- askCrossOffsets(Tag) - Method in interface nxopen.uf.UFRoute
-
- askCrossStockData(Tag) - Method in interface nxopen.uf.UFRoute
-
- AskCrossStockData() - Constructor for class nxopen.uf.UFRoute.AskCrossStockData
-
- askCrossStyle(Tag) - Method in interface nxopen.uf.UFRoute
-
- askCrvCrvConstraint(Tag) - Method in interface nxopen.uf.UFMotion
-
- askCSunkHoleParms(Tag, int) - Method in interface nxopen.uf.UFModlFeatures
-
- AskCSunkHoleParmsData() - Constructor for class nxopen.uf.UFModlFeatures.AskCSunkHoleParmsData
-
- askCsysInfo(Tag) - Method in interface nxopen.uf.UFCsys
-
- AskCsysInfoData() - Constructor for class nxopen.uf.UFCsys.AskCsysInfoData
-
- askCurLanguageNx() - Method in interface nxopen.uf.UFSfl
-
- askCurrDir(Tag) - Method in interface nxopen.uf.UFDirpath
-
- askCurrentDrawing() - Method in interface nxopen.uf.UFDraw
-
- askCurrentFeature(Tag) - Method in interface nxopen.uf.UFModeling
-
- askCurrentFrame(Tag) - Method in interface nxopen.uf.UFAssem
-
- askCurrentGridContext() - Method in interface nxopen.uf.UFDisp
-
- askCurrentHighestTag() - Method in interface nxopen.uf.UFPs
-
- askCurrentlySelectedMaterial() - Method in interface nxopen.uf.UFDisp
-
- AskCurrentlySelectedMaterialData() - Constructor for class nxopen.uf.UFDisp.AskCurrentlySelectedMaterialData
-
- askCurrentPartition() - Method in interface nxopen.uf.UFPs
-
- askCurrentResultDataType() - Method in interface nxopen.cae.ResultAccess
-
Returns the result type for the current result state defined by
ResultParameters
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
Created in NX6.0.2
- askCurrentSite() - Method in interface nxopen.features.shipdesign.PenetrationUtils
-
Ask current
PenetrationSite
License requirements: nx_penetration_mgmt ("Penetration Management")
Created in NX8.0.0
- askCurrentStep(Tag) - Method in interface nxopen.uf.UFAssem
-
- askCurrentXyClip(Tag) - Method in interface nxopen.uf.UFView
-
- askCursorView() - Method in interface nxopen.uf.UFUi
-
- askCurveClosed(Tag) - Method in interface nxopen.uf.UFModlGeneral
-
- askCurveFitData(Tag) - Method in interface nxopen.uf.UFCurve
-
- askCurveFitData() - Method in interface nxopen.uf.UFModl
-
- askCurveFitMethod() - Method in interface nxopen.uf.UFModlGeneral
-
- askCurveGroupMembers(Tag) - Method in interface nxopen.uf.UFDraw
-
- AskCurveGroupMembersData() - Constructor for class nxopen.uf.UFDraw.AskCurveGroupMembersData
-
- askCurveInflections(Tag, double[], double[]) - Method in interface nxopen.uf.UFCurve
-
- AskCurveInflectionsData() - Constructor for class nxopen.uf.UFCurve.AskCurveInflectionsData
-
- askCurveMesh(Tag) - Method in interface nxopen.uf.UFModlFeatures
-
- askCurveMesh1(Tag) - Method in interface nxopen.uf.UFModlFeatures
-
- AskCurveMesh1Data() - Constructor for class nxopen.uf.UFModlFeatures.AskCurveMesh1Data
-
- AskCurveMeshData() - Constructor for class nxopen.uf.UFModlFeatures.AskCurveMeshData
-
- askCurveOfSxedge(Tag) - Method in interface nxopen.uf.UFDraw
-
- askCurveParm(Tag, double[]) - Method in interface nxopen.uf.UFModlGeneral
-
- AskCurveParmData() - Constructor for class nxopen.uf.UFModlGeneral.AskCurveParmData
-
- askCurveParmNoExt(Tag, double[]) - Method in interface nxopen.uf.UFModlGeneral
-
- askCurvePeriodicity(Tag) - Method in interface nxopen.uf.UFModlGeneral
-
- askCurveProps(Tag, double) - Method in interface nxopen.uf.UFModlGeneral
-
- AskCurvePropsData() - Constructor for class nxopen.uf.UFModlGeneral.AskCurvePropsData
-
- askCurveTurnAngle(Tag, double[]) - Method in interface nxopen.uf.UFCurve
-
- askCustomerArea(Tag) - Method in interface nxopen.uf.UFPart
-
- askCustomFeed(UFVariant, UFDrpos.FeedUse, UFDrpos.FeedUnit) - Method in interface nxopen.uf.UFDrpos
-
- askCustomSymbolAngle(Tag) - Method in interface nxopen.uf.UFDrf
-
- askCustomSymbolAttachLocations(Tag) - Method in interface nxopen.uf.UFDrf
-
- askCustomSymbolLeader(Tag) - Method in interface nxopen.uf.UFDrf
-
- askCustomSymbolName(Tag) - Method in interface nxopen.uf.UFDrf
-
- askCustomSymbolScale(Tag) - Method in interface nxopen.uf.UFDrf
-
- askCutRegionOfIndex(Tag, int) - Method in interface nxopen.uf.UFTurn
-
- AskCutRegionOfIndexData() - Constructor for class nxopen.uf.UFTurn.AskCutRegionOfIndexData
-
- askCutRegionsExist(Tag) - Method in interface nxopen.uf.UFTurn
-
- AskCutRegionsExistData() - Constructor for class nxopen.uf.UFTurn.AskCutRegionsExistData
-
- askCutterDbObject() - Method in interface nxopen.uf.UFCam
-
- askCutterGroup(Tag) - Method in interface nxopen.uf.UFOper
-
- askCvtCallbacks() - Method in interface nxopen.uf.UFClone
-
- AskCvtCallbacksData() - Constructor for class nxopen.uf.UFClone.AskCvtCallbacksData
-
- askCylinderParms(Tag, int) - Method in interface nxopen.uf.UFModlFeatures
-
- AskCylinderParmsData() - Constructor for class nxopen.uf.UFModlFeatures.AskCylinderParmsData
-
- askCylindricalBushing(Tag) - Method in interface nxopen.uf.UFMotion
-
- askCylPocketParms(Tag, int) - Method in interface nxopen.uf.UFModlFeatures
-
- AskCylPocketParmsData() - Constructor for class nxopen.uf.UFModlFeatures.AskCylPocketParmsData
-
- askDamper(Tag) - Method in interface nxopen.uf.UFMotion
-
- askDamperData(FEElement) - Method in interface nxopen.cae.ElementAssociatedDataUtils
-
Returns damper element associated data.
- AskDamperData() - Constructor for class nxopen.cae.ElementAssociatedDataUtils.AskDamperData
-
- askData(Tag) - Method in interface nxopen.uf.UFPatt
-
- AskData() - Constructor for class nxopen.uf.UFPatt.AskData
-
- askDatasetName(Tag) - Method in interface nxopen.uf.UFClear
-
- askDatasetVersion(Tag) - Method in interface nxopen.uf.UFClear
-
- askDataType(UFCamPref.CamPref) - Method in interface nxopen.uf.UFCamPref
-
- askDatumAxisParms(Tag) - Method in interface nxopen.uf.UFModlFeatures
-
- AskDatumAxisParmsData() - Constructor for class nxopen.uf.UFModlFeatures.AskDatumAxisParmsData
-
- askDatumByLabel(String) - Method in interface nxopen.uf.UFGdt
-
- askDatumCsysComponents(Tag) - Method in interface nxopen.uf.UFModlFeatures
-
- AskDatumCsysComponentsData() - Constructor for class nxopen.uf.UFModlFeatures.AskDatumCsysComponentsData
-
- askDatumIdentParms(Tag) - Method in interface nxopen.uf.UFGdt
-
- askDatumKeywords(Tag) - Method in interface nxopen.uf.UFGdt
-
- AskDatumKeywordsData() - Constructor for class nxopen.uf.UFGdt.AskDatumKeywordsData
-
- askDatumMultipleParms(Tag) - Method in interface nxopen.uf.UFGdt
-
- askDatumObjects(Tag) - Method in interface nxopen.uf.UFProcessAid
-
- AskDatumObjectsData() - Constructor for class nxopen.uf.UFProcessAid.AskDatumObjectsData
-
- askDatumOfLabel(String) - Method in interface nxopen.uf.UFGdt
-
- askDatumOfTarget(Tag) - Method in interface nxopen.uf.UFGdt
-
- askDatumPlane(Tag) - Method in interface nxopen.uf.UFModeling
-
- AskDatumPlaneData() - Constructor for class nxopen.uf.UFModeling.AskDatumPlaneData
-
- askDatumPlaneParms(Tag) - Method in interface nxopen.uf.UFModlFeatures
-
- AskDatumPlaneParmsData() - Constructor for class nxopen.uf.UFModlFeatures.AskDatumPlaneParmsData
-
- askDatumPointAndDirection(Tag) - Method in interface nxopen.uf.UFModlFeatures
-
- AskDatumPointAndDirectionData() - Constructor for class nxopen.uf.UFModlFeatures.AskDatumPointAndDirectionData
-
- askDatumReferencers(Tag) - Method in interface nxopen.uf.UFGdt
-
- AskDatumReferencersData() - Constructor for class nxopen.uf.UFGdt.AskDatumReferencersData
-
- askDatumsInPart(Tag, UFProcessAid.Types) - Method in interface nxopen.uf.UFProcessAid
-
- askDatumsOfFeature(Tag) - Method in interface nxopen.uf.UFGdt
-
- AskDatumsOfFeatureData() - Constructor for class nxopen.uf.UFGdt.AskDatumsOfFeatureData
-
- askDaxisSize(Tag) - Method in interface nxopen.uf.UFModlFeatures
-
- askDbcMld(UFVariant) - Method in interface nxopen.uf.UFDbcMld
-
- askDecals(Tag) - Method in interface nxopen.uf.UFDisp
-
- AskDecalsData() - Constructor for class nxopen.uf.UFDisp.AskDecalsData
-
- askDefAction() - Method in interface nxopen.uf.UFClone
-
- askDefAssocFileCopy() - Method in interface nxopen.uf.UFClone
-
- askDefaultArrangement(Tag) - Method in interface nxopen.uf.UFAssem
-
- askDefaultBannerOptions() - Method in interface nxopen.uf.UFPlot
-
- askDefaultCellPrefs() - Method in interface nxopen.uf.UFTabnot
-
- askDefaultClearZone(Tag) - Method in interface nxopen.uf.UFClear
-
- askDefaultColPrefs() - Method in interface nxopen.uf.UFPlist
-
- askDefaultCustomColors() - Method in interface nxopen.uf.UFCgm
-
- askDefaultCustomColors() - Method in interface nxopen.uf.UFPlot
-
- askDefaultCustomWidths() - Method in interface nxopen.uf.UFCgm
-
- askDefaultCustomWidths() - Method in interface nxopen.uf.UFPlot
-
- askDefaultDensity(UFModl.DensityUnits) - Method in interface nxopen.uf.UFModeling
-
- askDefaultExportOptions() - Method in interface nxopen.uf.UFCgm
-
- askDefaultFormula(UFVariant) - Method in interface nxopen.uf.UFKf
-
- askDefaultJobName(Tag) - Method in interface nxopen.uf.UFPlot
-
- askDefaultJobOptions() - Method in interface nxopen.uf.UFPlot
-
- askDefaultParameters() - Method in interface nxopen.uf.UFFacet
-
- askDefaultPrefs() - Method in interface nxopen.uf.UFPlist
-
- askDefaultPrinterAndProfile() - Method in interface nxopen.uf.UFPlot
-
- AskDefaultPrinterAndProfileData() - Constructor for class nxopen.uf.UFPlot.AskDefaultPrinterAndProfileData
-
- askDefaultRefSets() - Method in interface nxopen.uf.UFAssem
-
- AskDefaultRefSetsData() - Constructor for class nxopen.uf.UFAssem.AskDefaultRefSetsData
-
- askDefaultSectionPrefs() - Method in interface nxopen.uf.UFTabnot
-
- askDefaultUnitForComponent(Result.Component) - Method in interface nxopen.cae.BaseResultType
-
Returns default unit for a given component of this Result Type
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- askDefCi() - Method in interface nxopen.uf.UFClone
-
- askDefCiCommentChecking() - Method in interface nxopen.uf.UFClone
-
- AskDefCiCommentCheckingData() - Constructor for class nxopen.uf.UFClone.AskDefCiCommentCheckingData
-
- askDefCo() - Method in interface nxopen.uf.UFClone
-
- askDefCreSettings() - Method in interface nxopen.uf.UFObj
-
- askDefDirectory() - Method in interface nxopen.uf.UFClone
-
- askDefFolder() - Method in interface nxopen.uf.UFClone
-
- askDefGroup() - Method in interface nxopen.uf.UFClone
-
- askDefiningData() - Method in interface nxopen.routing.SplinePathBuilder
-
When a spline is selected for editing, the builder will analyze the spline
and gather all of the defining data.
- askDefinitionAllowableGeometry(Tag) - Method in interface nxopen.uf.UFPd
-
- AskDefinitionAllowableGeometryData() - Constructor for class nxopen.uf.UFPd.AskDefinitionAllowableGeometryData
-
- askDefItemType() - Method in interface nxopen.uf.UFClone
-
- askDefNaming() - Method in interface nxopen.uf.UFClone
-
- askDefNmCopy() - Method in interface nxopen.uf.UFClone
-
- askDeformableDefinition(Tag) - Method in interface nxopen.uf.UFAssem
-
- askDeformedDefinitionData(Tag) - Method in interface nxopen.uf.UFAssem
-
- askDefOwner() - Method in interface nxopen.uf.UFClone
-
- askDefPdmDesc() - Method in interface nxopen.uf.UFClone
-
- askDefPdmName() - Method in interface nxopen.uf.UFClone
-
- askDefValidationOptions() - Method in interface nxopen.uf.UFClone
-
- askDegofData(UFVariant, String) - Method in interface nxopen.uf.UFSim
-
- AskDegofData() - Constructor for class nxopen.uf.UFSim.AskDegofData
-
- askDelayStatus(Tag) - Method in interface nxopen.uf.UFWave
-
- askDependentFiles(String) - Method in interface nxopen.uf.UFUgmgr
-
- AskDependentFilesData() - Constructor for class nxopen.uf.UFUgmgr.AskDependentFilesData
-
- askDepthToleranceParms(Tag) - Method in interface nxopen.uf.UFGdt
-
- askDescription(Tag) - Method in interface nxopen.uf.UFGdt
-
- askDescription(Tag) - Method in interface nxopen.uf.UFPart
-
- askDescriptorOfExp(Tag) - Method in interface nxopen.uf.UFModlGeneral
-
- askDialogDirectory(UFUi.DialogDirId) - Method in interface nxopen.uf.UFUi
-
- askDialogFilter(UFUi.DialogFilterId) - Method in interface nxopen.uf.UFUi
-
- askDiameterRadiusPreferences(UFDrf.DiameterRadiusPreferences) - Method in interface nxopen.uf.UFDrf
-
- askDimAppendedTextSpaceFactor(Tag) - Method in interface nxopen.uf.UFDrf
-
- askDimDimLineSpaceFactor(Tag) - Method in interface nxopen.uf.UFDrf
-
- askDimensionPreferences(UFDrf.DimensionPreferences) - Method in interface nxopen.uf.UFDrf
-
- askDimensionPreferences1() - Method in interface nxopen.uf.UFDrf
-
- askDimensionSetOffset(Tag) - Method in interface nxopen.uf.UFDrf
-
- askDimensionsOfSet(Tag) - Method in interface nxopen.uf.UFDrf
-
- AskDimensionsOfSetData() - Constructor for class nxopen.uf.UFDrf.AskDimensionsOfSetData
-
- askDimensionsOfSketch(Tag) - Method in interface nxopen.uf.UFSket
-
- AskDimensionsOfSketchData() - Constructor for class nxopen.uf.UFSket.AskDimensionsOfSketchData
-
- askDimensionText(Tag) - Method in interface nxopen.uf.UFDrf
-
- AskDimensionTextData() - Constructor for class nxopen.uf.UFDrf.AskDimensionTextData
-
- askDimInfo(Tag) - Method in interface nxopen.uf.UFDrf
-
- AskDimInfoData() - Constructor for class nxopen.uf.UFDrf.AskDimInfoData
-
- askDimInspectionType(Tag) - Method in interface nxopen.uf.UFDrf
-
- askDimReferenceType(Tag) - Method in interface nxopen.uf.UFDrf
-
- askDimStatus(Tag) - Method in interface nxopen.uf.UFSket
-
- AskDimStatusData() - Constructor for class nxopen.uf.UFSket.AskDimStatusData
-
- askDimToleranceTextSpaceFactor(Tag) - Method in interface nxopen.uf.UFDrf
-
- askDirCount(Tag) - Method in interface nxopen.uf.UFDirpath
-
- askDirectionOfAxis(Tag) - Method in interface nxopen.uf.UFSo
-
- askDirectionOfDirr(Tag) - Method in interface nxopen.uf.UFSo
-
- askDirIndex(Tag) - Method in interface nxopen.uf.UFDirpath
-
- askDirrOnSurf(Tag) - Method in interface nxopen.uf.UFSo
-
- askDirs(Tag) - Method in interface nxopen.uf.UFDirpath
-
- AskDirsData() - Constructor for class nxopen.uf.UFDirpath.AskDirsData
-
- askDisplay() - Method in interface nxopen.uf.UFDisp
-
- askDisplayContext(UFVariant) - Method in interface nxopen.uf.UFDisp
-
- askDisplayedDeformationOfPartOcc(Tag) - Method in interface nxopen.uf.UFAssem
-
- askDisplayedObjects(Tag) - Method in interface nxopen.uf.UFDraw
-
- AskDisplayedObjectsData() - Constructor for class nxopen.uf.UFDraw.AskDisplayedObjectsData
-
- askDisplayMarkerOfPoint(Tag) - Method in interface nxopen.uf.UFSo
-
- askDisplayPart() - Method in interface nxopen.uf.UFPart
-
- askDisplayProperties(Tag) - Method in interface nxopen.uf.UFObj
-
- askDisplayState() - Method in interface nxopen.uf.UFDraw
-
- askDispParms() - Method in interface nxopen.uf.UFDrf
-
- AskDispParmsData() - Constructor for class nxopen.uf.UFDrf.AskDispParmsData
-
- askDistanceParms(Tag) - Method in interface nxopen.uf.UFGexp
-
- AskDistanceParmsData() - Constructor for class nxopen.uf.UFGexp.AskDistanceParmsData
-
- askDistanceTolerance() - Method in interface nxopen.uf.UFModeling
-
- askDmvRotationPlane(Tag) - Method in interface nxopen.uf.UFDraw
-
- askDocTemplateName() - Method in interface nxopen.uf.UFCam
-
- askDoglegInfo(Tag) - Method in interface nxopen.uf.UFDrf
-
- askDomElmType(Tag) - Method in interface nxopen.uf.UFSf
-
- askDouble(UFVariant, String) - Method in interface nxopen.uf.UFUde
-
- askDoubleArray(UFVariant, String, int, double[]) - Method in interface nxopen.uf.UFMom
-
- askDoubleArray2d(UFVariant, String, int, int) - Method in interface nxopen.uf.UFMom
-
- askDoubleOfCriteria(Tag, UFVariant, String) - Method in interface nxopen.uf.UFFbmGeom
-
- askDoubleOfScalar(Tag) - Method in interface nxopen.uf.UFSo
-
- askDoubleValue(Tag, int) - Method in interface nxopen.uf.UFParam
-
- askDoubleValueOfAttribute(UFVariant, String) - Method in interface nxopen.uf.UFMfm
-
- AskDoubleValueOfAttributeData() - Constructor for class nxopen.uf.UFMfm.AskDoubleValueOfAttributeData
-
- askDoubleValueOfClassifiedCrit(Tag, String, UFVariant, int) - Method in interface nxopen.uf.UFFbmGeom
-
- askDoubleVla(Tag, int) - Method in interface nxopen.uf.UFParam
-
- AskDoubleVlaData() - Constructor for class nxopen.uf.UFParam.AskDoubleVlaData
-
- askDovetailSlotParms(Tag, int) - Method in interface nxopen.uf.UFModl
-
- AskDovetailSlotParmsData() - Constructor for class nxopen.uf.UFModl.AskDovetailSlotParmsData
-
- askDpud(UFVariant) - Method in interface nxopen.uf.UFDpud
-
- askDraftAidTextInfo(Tag) - Method in interface nxopen.uf.UFDrf
-
- AskDraftAidTextInfoData() - Constructor for class nxopen.uf.UFDrf.AskDraftAidTextInfoData
-
- askDraftingCurveParents(Tag) - Method in interface nxopen.uf.UFDraw
-
- AskDraftingCurveParentsData() - Constructor for class nxopen.uf.UFDraw.AskDraftingCurveParentsData
-
- askDraftingCurveType(Tag) - Method in interface nxopen.uf.UFDraw
-
- askDrawFaces(int) - Method in interface nxopen.uf.UFDie
-
- AskDrawFacesData() - Constructor for class nxopen.uf.UFDie.AskDrawFacesData
-
- askDrawingDisplay() - Method in interface nxopen.uf.UFDisp
-
- askDrawingOfView(Tag) - Method in interface nxopen.uf.UFDraw
-
- askDrawingRefPt(Tag) - Method in interface nxopen.uf.UFDraw
-
- askDrawings() - Method in interface nxopen.uf.UFDraw
-
- AskDrawingsData() - Constructor for class nxopen.uf.UFDraw.AskDrawingsData
-
- askDrawingSheetColors(Tag) - Method in interface nxopen.uf.UFPlot
-
- askDrawingSheetWidths(Tag) - Method in interface nxopen.uf.UFPlot
-
- askDrf(Tag) - Method in interface nxopen.uf.UFGdt
-
- askDriveDirection(UFVariant) - Method in interface nxopen.uf.UFDrpos
-
- askDrpos0(UFVariant) - Method in interface nxopen.uf.UFDpud
-
- askDrpos1(UFVariant) - Method in interface nxopen.uf.UFDpud
-
- askDrpos2(UFVariant) - Method in interface nxopen.uf.UFDpud
-
- askDryrun() - Method in interface nxopen.uf.UFClone
-
- askDursolNx(Tag) - Method in interface nxopen.uf.UFSf
-
- AskDursolNxData() - Constructor for class nxopen.uf.UFSf.AskDursolNxData
-
- askDynamicUpdate() - Method in interface nxopen.uf.UFModeling
-
- askEdge(int) - Method in interface nxopen.features.RapidSurfaceBuilder
-
Asks an edge in the current curve network
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- askEdgeBlend(Tag) - Method in interface nxopen.uf.UFModlFeatures
-
- askEdgeBlend1(Tag) - Method in interface nxopen.uf.UFModlFeatures
-
- askEdgeBlendIsMult(Tag) - Method in interface nxopen.uf.UFModlFeatures
-
- askEdgeBody(Tag) - Method in interface nxopen.uf.UFModeling
-
- askEdgeConvexity(Tag, int, int) - Method in interface nxopen.uf.UFFacet
-
- askEdgeCount() - Method in interface nxopen.features.RapidSurfaceBuilder
-
Asks edge count in the current curve network
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- askEdgeDensity(Tag) - Method in interface nxopen.uf.UFSf
-
- askEdgeFaces(Tag) - Method in interface nxopen.uf.UFModeling
-
- askEdgeFeats(Tag) - Method in interface nxopen.uf.UFModeling
-
- askEdgeSmoothness(Tag, double) - Method in interface nxopen.uf.UFModeling
-
- askEdgeTolerance(Tag) - Method in interface nxopen.uf.UFModeling
-
- askEdgeType(Tag) - Method in interface nxopen.uf.UFModeling
-
- askEdgeVerts(Tag) - Method in interface nxopen.uf.UFModeling
-
- AskEdgeVertsData() - Constructor for class nxopen.uf.UFModeling.AskEdgeVertsData
-
- askEditControlCallback(Tree, Node, int) - Method in interface nxopen.blockstyler.Tree.AskEditControlCallback
-
Represents the callback which gets called when edit is attempted on any cell.
- askElement(Tag) - Method in interface nxopen.uf.UFSf
-
- askElementByIndex(int) - Method in interface nxopen.mechatronics.CamProfileBuilder
-
Ask segment element.
- AskElementData() - Constructor for class nxopen.uf.UFSf.AskElementData
-
- askElementDescriptorNameNx(Tag) - Method in interface nxopen.uf.UFSfl
-
- askElementDescriptorNx(Tag, String) - Method in interface nxopen.uf.UFSfl
-
- askElementEdgeNodalResult(int, int, int) - Method in interface nxopen.cae.ResultAccess
-
Ask current component value at a specified element, edge and node index.
- askElementEdgeNodalResultAllComponents(int, int, int) - Method in interface nxopen.cae.ResultAccess
-
Ask all component values at a specified element index, edge index, node index.
- askElementEdgeResult(int, int) - Method in interface nxopen.cae.ResultAccess
-
Ask current component value at a specified element and edge index.
- askElementEdgeResultAllComponents(int, int) - Method in interface nxopen.cae.ResultAccess
-
Ask all component values at a specified element index, edge index.
- askElementEdges(Tag) - Method in interface nxopen.uf.UFSf
-
- AskElementEdgesData() - Constructor for class nxopen.uf.UFSf.AskElementEdgesData
-
- askElementFaceNodalResult(int, int, int) - Method in interface nxopen.cae.ResultAccess
-
Ask current component value at a specified element, face and node index.
- askElementFaceNodalResultAllComponents(int, int, int) - Method in interface nxopen.cae.ResultAccess
-
Ask all component values at a specified element index, face index, node index.
- askElementFaceResult(int, int) - Method in interface nxopen.cae.ResultAccess
-
Ask current component value at a specified element and face index.
- askElementFaceResultAllComponents(int, int) - Method in interface nxopen.cae.ResultAccess
-
Ask all component values at a specified element index, face index.
- askElementIndex(int) - Method in interface nxopen.cae.Result
-
Ask element index of a given element user label
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- askElementInfo(FEElement) - Method in interface nxopen.cae.BeamElementInfoHandler
-
- askElementLabel(int) - Method in interface nxopen.cae.Result
-
Ask element user label of a given element index
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- askElementLabelUsed(int) - Method in interface nxopen.cae.FEElementLabelMap
-
Indicates whether input element label is already used or not
License requirements: nx_masterfem ("Finite Element Modeling")
.
- askElementNodalResult(int) - Method in interface nxopen.cae.ResultAccess
-
Ask element nodal result at a specified element index
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- askElementNodalResult(int, int) - Method in interface nxopen.cae.ResultAccess
-
Ask current component value at a specified element index and node index
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- askElementNodalResultAllComponents(int) - Method in interface nxopen.cae.ResultAccess
-
Ask element nodal result at a specified element index
Use
ResultAccess.askResultComponents()
to query type of components
All values will be returned as a single dimensional array.
- askElementNodalResultAllComponents(int, int) - Method in interface nxopen.cae.ResultAccess
-
Ask element nodal result at a specified element index, node index
Use
ResultAccess.askElementNodalResultAllComponents(int)
to query all type of components
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
Created in NX11.0.0
- AskElementNodalResultAllComponentsData() - Constructor for class nxopen.cae.ResultAccess.AskElementNodalResultAllComponentsData
-
- AskElementNodalResultData() - Constructor for class nxopen.cae.ResultAccess.AskElementNodalResultData
-
- askElementNodes(int) - Method in interface nxopen.cae.Result
-
Asks for the nodes given an element
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- askElementResult(int) - Method in interface nxopen.cae.ResultAccess
-
Ask current component value at a specified element index.
- askElementResult(int[]) - Method in interface nxopen.cae.ResultAccess
-
Ask current component value at a specified element indices.
- askElementResultAllComponents(int) - Method in interface nxopen.cae.ResultAccess
-
Ask all component values at a specified element index
Use
ResultAccess.askResultComponents()
to query type of components
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
Created in NX6.0.2
- askElementShape(int) - Method in interface nxopen.cae.Result
-
Ask element shape given an element index
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- askElementsLength() - Method in interface nxopen.mechatronics.CamProfileBuilder
-
Ask segments length.
- askElementTypeNames(UFSf.ElementType) - Method in interface nxopen.uf.UFSf
-
- askEllipse(UFVariant) - Method in interface nxopen.uf.UFEval
-
- askEmbeddedUdsFontInfo(Tag) - Method in interface nxopen.uf.UFDrf
-
- AskEmbeddedUdsFontInfoData() - Constructor for class nxopen.uf.UFDrf.AskEmbeddedUdsFontInfoData
-
- askEnforcePiecePart(Tag) - Method in interface nxopen.uf.UFPart
-
- askEnlarge(Tag) - Method in interface nxopen.uf.UFModlFeatures
-
- AskEnlargeData() - Constructor for class nxopen.uf.UFModlFeatures.AskEnlargeData
-
- askEntityParents(int, Tag) - Method in interface nxopen.uf.UFModl
-
- AskEntityParentsData() - Constructor for class nxopen.uf.UFModl.AskEntityParentsData
-
- askEntityPartition(Tag) - Method in interface nxopen.uf.UFPs
-
- askError(UFVariant) - Method in interface nxopen.uf.UFKf
-
- askEvaluatedCellText(Tag) - Method in interface nxopen.uf.UFTabnot
-
- askExcludeRules(Tag) - Method in interface nxopen.uf.UFClear
-
- askExistingTwistData() - Method in interface nxopen.routing.RouteSweptTwistBuilder
-
The twist data i.e locations and angles
License requirements: routing_harness ("Routing Harness")
Created in NX6.0.0
- AskExistingTwistData() - Constructor for class nxopen.routing.RouteSweptTwistBuilder.AskExistingTwistData
-
- askExp(String) - Method in interface nxopen.uf.UFModlGeneral
-
- askExpDescOfFeat(Tag) - Method in interface nxopen.uf.UFModlGeneral
-
- AskExpDescOfFeatData() - Constructor for class nxopen.uf.UFModlGeneral.AskExpDescOfFeatData
-
- askExpDescOfFrec(Tag) - Method in interface nxopen.uf.UFModlGeneral
-
- AskExpDescOfFrecData() - Constructor for class nxopen.uf.UFModlGeneral.AskExpDescOfFrecData
-
- askExplodedObject(Tag, Tag) - Method in interface nxopen.uf.UFAssem
-
- askExplosion() - Method in interface nxopen.Traceline
-
Returns the explosion that the traceline has been created in
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- askExplosions(Tag) - Method in interface nxopen.uf.UFAssem
-
- AskExplosionsData() - Constructor for class nxopen.uf.UFAssem.AskExplosionsData
-
- askExplosionVector(Tag) - Method in interface nxopen.uf.UFAssem
-
- askExpOfScalar(Tag) - Method in interface nxopen.uf.UFSo
-
- askExportDirectory(Tag) - Method in interface nxopen.uf.UFUgmgr
-
- askExpsOfFeature(Tag) - Method in interface nxopen.uf.UFModlGeneral
-
- AskExpsOfFeatureData() - Constructor for class nxopen.uf.UFModlGeneral.AskExpsOfFeatureData
-
- askExpsOfPart(Tag) - Method in interface nxopen.uf.UFModlGeneral
-
- AskExpsOfPartData() - Constructor for class nxopen.uf.UFModlGeneral.AskExpsOfPartData
-
- askExpsOfSketch(Tag) - Method in interface nxopen.uf.UFSket
-
- AskExpsOfSketchData() - Constructor for class nxopen.uf.UFSket.AskExpsOfSketchData
-
- askExpTagString(Tag) - Method in interface nxopen.uf.UFModlGeneral
-
- askExpTagValue(Tag) - Method in interface nxopen.uf.UFModlGeneral
-
- askExtendedTypeAndSubtype(Tag) - Method in interface nxopen.uf.UFObj
-
- AskExtendedTypeAndSubtypeData() - Constructor for class nxopen.uf.UFObj.AskExtendedTypeAndSubtypeData
-
- askExtreme(Tag, double[], double[], double[]) - Method in interface nxopen.uf.UFModeling
-
- AskExtremeData() - Constructor for class nxopen.uf.UFModeling.AskExtremeData
-
- askExtrudeOffsetDir(Tag) - Method in interface nxopen.uf.UFModl
-
- AskExtrudeOffsetDirData() - Constructor for class nxopen.uf.UFModl.AskExtrudeOffsetDirData
-
- askExtrusion(Tag) - Method in interface nxopen.uf.UFModl
-
- AskExtrusionData() - Constructor for class nxopen.uf.UFModl.AskExtrusionData
-
- askFace(Tag, int) - Method in interface nxopen.uf.UFMsao
-
- askFaceAnalysis(Tag) - Method in interface nxopen.uf.UFObj
-
- askFaceBlendLawRadii(Tag) - Method in interface nxopen.uf.UFModlFeatures
-
- AskFaceBlendLawRadiiData() - Constructor for class nxopen.uf.UFModlFeatures.AskFaceBlendLawRadiiData
-
- askFaceBlendLawRange1Radii(Tag) - Method in interface nxopen.uf.UFModlFeatures
-
- AskFaceBlendLawRange1RadiiData() - Constructor for class nxopen.uf.UFModlFeatures.AskFaceBlendLawRange1RadiiData
-
- askFaceBlendLawRange2Radii(Tag) - Method in interface nxopen.uf.UFModlFeatures
-
- AskFaceBlendLawRange2RadiiData() - Constructor for class nxopen.uf.UFModlFeatures.AskFaceBlendLawRange2RadiiData
-
- askFaceBody(Tag) - Method in interface nxopen.uf.UFModeling
-
- askFaceConstraint(Tag) - Method in interface nxopen.uf.UFModlFeatures
-
- AskFaceConstraintData() - Constructor for class nxopen.uf.UFModlFeatures.AskFaceConstraintData
-
- askFaceData(Tag) - Method in interface nxopen.uf.UFModeling
-
- AskFaceData() - Constructor for class nxopen.uf.UFModeling.AskFaceData
-
- askFaceEdges(Tag) - Method in interface nxopen.uf.UFModeling
-
- askFaceFaceIntersect(Tag) - Method in interface nxopen.uf.UFModeling
-
- AskFaceFaceIntersectData() - Constructor for class nxopen.uf.UFModeling.AskFaceFaceIntersectData
-
- askFaceFeats(Tag) - Method in interface nxopen.uf.UFModeling
-
- askFaceFromIndex(int) - Method in interface nxopen.uf.UFGdt
-
- askFaceGridCount(Tag) - Method in interface nxopen.uf.UFModeling
-
- AskFaceGridCountData() - Constructor for class nxopen.uf.UFModeling.AskFaceGridCountData
-
- askFaceIdOfFacet(Tag, int) - Method in interface nxopen.uf.UFFacet
-
- askFaceIdOfSolidFace(Tag, Tag) - Method in interface nxopen.uf.UFFacet
-
- askFaceIndex(Tag) - Method in interface nxopen.uf.UFGdt
-
- askFaceIndexString(Tag) - Method in interface nxopen.uf.UFGdt
-
- askFaceMinRadii(Tag) - Method in interface nxopen.uf.UFModeling
-
- AskFaceMinRadiiData() - Constructor for class nxopen.uf.UFModeling.AskFaceMinRadiiData
-
- askFaceOfSil(Tag) - Method in interface nxopen.uf.UFDraw
-
- askFacepairParms(Tag) - Method in interface nxopen.uf.UFModeling
-
- AskFacepairParmsData() - Constructor for class nxopen.uf.UFModeling.AskFacepairParmsData
-
- askFaceParm(Tag, double[]) - Method in interface nxopen.uf.UFModeling
-
- askFaceParm2(Tag, double[]) - Method in interface nxopen.uf.UFModeling
-
- AskFaceParm2Data() - Constructor for class nxopen.uf.UFModeling.AskFaceParm2Data
-
- AskFaceParmData() - Constructor for class nxopen.uf.UFModeling.AskFaceParmData
-
- askFacePeriodicity(Tag) - Method in interface nxopen.uf.UFModeling
-
- AskFacePeriodicityData() - Constructor for class nxopen.uf.UFModeling.AskFacePeriodicityData
-
- askFaceProps(Tag, double[]) - Method in interface nxopen.uf.UFModeling
-
- AskFacePropsData() - Constructor for class nxopen.uf.UFModeling.AskFacePropsData
-
- askFaces(Tag) - Method in interface nxopen.uf.UFGdt
-
- AskFacesData() - Constructor for class nxopen.uf.UFGdt.AskFacesData
-
- askFaceSelfIntersect(Tag) - Method in interface nxopen.uf.UFModeling
-
- AskFaceSelfIntersectData() - Constructor for class nxopen.uf.UFModeling.AskFaceSelfIntersectData
-
- askFaceSilsInView(Tag, Tag) - Method in interface nxopen.uf.UFDraw
-
- AskFaceSilsInViewData() - Constructor for class nxopen.uf.UFDraw.AskFaceSilsInViewData
-
- askFaceSketches(Tag) - Method in interface nxopen.uf.UFSket
-
- askFaceSmoothness(Tag) - Method in interface nxopen.uf.UFModeling
-
- askFaceSpikes(Tag) - Method in interface nxopen.uf.UFModeling
-
- askFaceTopology(Tag) - Method in interface nxopen.uf.UFModeling
-
- askFaceTorusType(Tag) - Method in interface nxopen.uf.UFModeling
-
- askFaceType(Tag) - Method in interface nxopen.uf.UFModeling
-
- askFaceUvMinmax(UFVariant) - Method in interface nxopen.uf.UFEvalsf
-
- askFaceUvMinmax(Tag) - Method in interface nxopen.uf.UFModeling
-
- askFamilies(Tag) - Method in interface nxopen.uf.UFPart
-
- AskFamiliesData() - Constructor for class nxopen.uf.UFPart.AskFamiliesData
-
- askFamilyData(Tag) - Method in interface nxopen.uf.UFFam
-
- askFamilyInstance(Tag) - Method in interface nxopen.uf.UFPart
-
- askFamilyMemberHandles(Tag, String, String) - Method in interface nxopen.uf.UFUgmgr
-
- AskFamilyMemberHandlesData() - Constructor for class nxopen.uf.UFUgmgr.AskFamilyMemberHandlesData
-
- askFamilyNamesByFilter(boolean, boolean, boolean) - Method in interface nxopen.cae.BCSelectionDisplayBuilder
-
Returns the list of BC family names used in the current solution.
- askFamilySaveDir(Tag) - Method in interface nxopen.uf.UFPart
-
- askFamilyTreatment() - Method in interface nxopen.uf.UFClone
-
- askFamInstSaveDir() - Method in interface nxopen.uf.UFPart
-
- askFcfDrf(Tag) - Method in interface nxopen.uf.UFGdt
-
- askFcfTags(Tag) - Method in interface nxopen.uf.UFGdt
-
- AskFcfTagsData() - Constructor for class nxopen.uf.UFGdt.AskFcfTagsData
-
- askFeatBody(Tag) - Method in interface nxopen.uf.UFModeling
-
- askFeatDirection(Tag) - Method in interface nxopen.uf.UFModeling
-
- AskFeatDirectionData() - Constructor for class nxopen.uf.UFModeling.AskFeatDirectionData
-
- askFeatDisplayName(Tag) - Method in interface nxopen.uf.UFModeling
-
- askFeatEdges(Tag) - Method in interface nxopen.uf.UFModeling
-
- askFeatError(Tag) - Method in interface nxopen.uf.UFModeling
-
- AskFeatErrorData() - Constructor for class nxopen.uf.UFModeling.AskFeatErrorData
-
- askFeatFaces(Tag) - Method in interface nxopen.uf.UFModeling
-
- askFeatFailList() - Method in interface nxopen.uf.UFModeling
-
- askFeatLocation(Tag) - Method in interface nxopen.uf.UFModeling
-
- askFeatName(Tag) - Method in interface nxopen.uf.UFModeling
-
- askFeatObject(Tag) - Method in interface nxopen.uf.UFModeling
-
- AskFeatObjectData() - Constructor for class nxopen.uf.UFModeling.AskFeatObjectData
-
- askFeatOrUdfSysname(Tag) - Method in interface nxopen.uf.UFModlGeneral
-
- askFeatRelatives(Tag) - Method in interface nxopen.uf.UFModeling
-
- AskFeatRelativesData() - Constructor for class nxopen.uf.UFModeling.AskFeatRelativesData
-
- askFeatSysname(Tag) - Method in interface nxopen.uf.UFModlGeneral
-
- askFeatTolerance(Tag) - Method in interface nxopen.uf.UFModeling
-
- AskFeatToleranceData() - Constructor for class nxopen.uf.UFModeling.AskFeatToleranceData
-
- askFeatType(Tag) - Method in interface nxopen.uf.UFModeling
-
- askFeature() - Method in interface nxopen.routing.Port
-
- askFeatureBoolean(Tag) - Method in interface nxopen.uf.UFModeling
-
- askFeatureCurves(Tag) - Method in interface nxopen.uf.UFCurve
-
- AskFeatureCurvesData() - Constructor for class nxopen.uf.UFCurve.AskFeatureCurvesData
-
- askFeatureEntities(Tag, UFVariant) - Method in interface nxopen.uf.UFFbmGeom
-
- AskFeatureEntitiesData() - Constructor for class nxopen.uf.UFFbmGeom.AskFeatureEntitiesData
-
- askFeatureName(Tag) - Method in interface nxopen.uf.UFFbmGeom
-
- askFeatureName(UFVariant) - Method in interface nxopen.uf.UFMfm
-
- askFeatureOfDatum(Tag) - Method in interface nxopen.uf.UFGdt
-
- askFeatures(Tag) - Method in interface nxopen.uf.UFFbmGeom
-
- AskFeaturesData() - Constructor for class nxopen.uf.UFFbmGeom.AskFeaturesData
-
- askFeatureSign(Tag) - Method in interface nxopen.uf.UFModeling
-
- askFeatureSketches(Tag) - Method in interface nxopen.uf.UFSket
-
- askFeaturesOfExp(Tag) - Method in interface nxopen.uf.UFModlGeneral
-
- AskFeaturesOfExpData() - Constructor for class nxopen.uf.UFModlGeneral.AskFeaturesOfExpData
-
- askFeaturesOfFace(Tag) - Method in interface nxopen.uf.UFGdt
-
- AskFeaturesOfFaceData() - Constructor for class nxopen.uf.UFGdt.AskFeaturesOfFaceData
-
- askFeaturesOfMirrorSet(Tag) - Method in interface nxopen.uf.UFModeling
-
- AskFeaturesOfMirrorSetData() - Constructor for class nxopen.uf.UFModeling.AskFeaturesOfMirrorSetData
-
- askFeaturesOfUdf(Tag) - Method in interface nxopen.uf.UFModlGeneral
-
- AskFeaturesOfUdfData() - Constructor for class nxopen.uf.UFModlGeneral.AskFeaturesOfUdfData
-
- askFeatureType(Tag) - Method in interface nxopen.uf.UFGdt
-
- askFeatureType(UFVariant) - Method in interface nxopen.uf.UFMfm
-
- askFeatWarningMessages(Tag) - Method in interface nxopen.uf.UFModeling
-
- AskFeatWarningMessagesData() - Constructor for class nxopen.uf.UFModeling.AskFeatWarningMessagesData
-
- askFileExist(String) - Method in interface nxopen.uf.UFCfi
-
- askFileExportStatus() - Method in interface nxopen.uf.UFUgmgr
-
- askFillLibraryData(boolean, String, String) - Method in interface nxopen.tooling.MoldFillingBuilder
-
Gets fill standard part library data.
- askFilter(Tag) - Method in interface nxopen.uf.UFFltr
-
- AskFilterData() - Constructor for class nxopen.uf.UFFltr.AskFilterData
-
- askFlagStatus() - Method in interface nxopen.uf.UFAbort
-
- askFlangeParms(Tag) - Method in interface nxopen.uf.UFModlSmd
-
- askFlangeProcFactor(Tag) - Method in interface nxopen.uf.UFModlSmd
-
- askFlatPattern(Tag) - Method in interface nxopen.uf.UFSmd
-
- askFogOptions(Tag) - Method in interface nxopen.uf.UFView
-
- askFoldedRadiusInfo(Tag) - Method in interface nxopen.uf.UFDrf
-
- askFoldedSxline(Tag) - Method in interface nxopen.uf.UFDraw
-
- AskFoldedSxlineData() - Constructor for class nxopen.uf.UFDraw.AskFoldedSxlineData
-
- askFolderName(Tag) - Method in interface nxopen.uf.UFUgmgr
-
- askFontHeader(Tag, int) - Method in interface nxopen.uf.UFUgfont
-
- askFontName(Tag, int) - Method in interface nxopen.uf.UFUgfont
-
- askFontStyles(Tag, int) - Method in interface nxopen.uf.UFUgfont
-
- AskFontStylesData() - Constructor for class nxopen.uf.UFUgfont.AskFontStylesData
-
- askFontType(Tag, int) - Method in interface nxopen.uf.UFUgfont
-
- askForceResults(Tag, UFMotion.VectorComponent, UFMotion.ReferenceFrame) - Method in interface nxopen.uf.UFMotion
-
- AskForceResultsData() - Constructor for class nxopen.uf.UFMotion.AskForceResultsData
-
- askFormableFeats(Tag) - Method in interface nxopen.uf.UFSmd
-
- askFormblkLines(Tag) - Method in interface nxopen.uf.UFSmd
-
- AskFormblkLinesData() - Constructor for class nxopen.uf.UFSmd.AskFormblkLinesData
-
- askFormTbl(Tag) - Method in interface nxopen.uf.UFSmd
-
- askFormTblCount(Tag) - Method in interface nxopen.uf.UFSmd
-
- askFormTblCurrentSeq(Tag) - Method in interface nxopen.uf.UFSmd
-
- askFpAddCurves(Tag) - Method in interface nxopen.uf.UFSmd
-
- AskFpAddCurvesData() - Constructor for class nxopen.uf.UFSmd.AskFpAddCurvesData
-
- askFpChildren(Tag, Tag) - Method in interface nxopen.uf.UFSmd
-
- AskFpChildrenData() - Constructor for class nxopen.uf.UFSmd.AskFpChildrenData
-
- askFpFaces(Tag) - Method in interface nxopen.uf.UFSmd
-
- AskFpFacesData() - Constructor for class nxopen.uf.UFSmd.AskFpFacesData
-
- askFpParent(Tag) - Method in interface nxopen.uf.UFSmd
-
- askFpPrefs() - Method in interface nxopen.uf.UFSmd
-
- askFrame(UFVariant) - Method in interface nxopen.uf.UFKf
-
- askFreeFormResult() - Method in interface nxopen.uf.UFModlFeatures
-
- askFromItems(Tag) - Method in interface nxopen.uf.UFRouteRun
-
- AskFromItemsData() - Constructor for class nxopen.uf.UFRouteRun.AskFromItemsData
-
- askFSDbObject() - Method in interface nxopen.uf.UFCam
-
- askFunction(Tag) - Method in interface nxopen.uf.UFMotion
-
- askFunctionTagFromName(String) - Method in interface nxopen.uf.UFMotion
-
- askFusionObject(Tag) - Method in interface nxopen.uf.UFKf
-
- askGapData(FEElement) - Method in interface nxopen.cae.ElementAssociatedDataUtils
-
Returns gap element associated data.
- AskGapData() - Constructor for class nxopen.cae.ElementAssociatedDataUtils.AskGapData
-
- askGdtObjectDfaFile(Tag) - Method in interface nxopen.uf.UFGdt
-
- askGdtSymbolInfo(Tag) - Method in interface nxopen.uf.UFDrf
-
- AskGdtSymbolInfoData() - Constructor for class nxopen.uf.UFDrf.AskGdtSymbolInfoData
-
- askGdtViewMatrix(Tag) - Method in interface nxopen.uf.UFGdt
-
- askGeneralBushing(Tag) - Method in interface nxopen.uf.UFMotion
-
- askGeneralPrefs() - Method in interface nxopen.uf.UFSmd
-
- askGeoConsOfGeometry(Tag, Tag) - Method in interface nxopen.uf.UFSket
-
- AskGeoConsOfGeometryData() - Constructor for class nxopen.uf.UFSket.AskGeoConsOfGeometryData
-
- askGeoConsOfSketch(Tag) - Method in interface nxopen.uf.UFSket
-
- AskGeoConsOfSketchData() - Constructor for class nxopen.uf.UFSket.AskGeoConsOfSketchData
-
- askGeomData(Tag, UFSf.MeshGeomUsage) - Method in interface nxopen.uf.UFSf
-
- AskGeomData() - Constructor for class nxopen.uf.UFSf.AskGeomData
-
- askGeometricDefinition(Tag) - Method in interface nxopen.uf.UFGdt
-
- askGeometryGroups(UFVariant) - Method in interface nxopen.uf.UFMfm
-
- AskGeometryGroupsData() - Constructor for class nxopen.uf.UFMfm.AskGeometryGroupsData
-
- askGeometryOfMaterial(Tag) - Method in interface nxopen.uf.UFDisp
-
- AskGeometryOfMaterialData() - Constructor for class nxopen.uf.UFDisp.AskGeometryOfMaterialData
-
- askGeomGroup(Tag) - Method in interface nxopen.uf.UFOper
-
- askGeomNull(Tag) - Method in interface nxopen.uf.UFSetup
-
- askGeomProvider(Tag, UFCam.GeomType) - Method in interface nxopen.uf.UFCamgeom
-
- askGeomRoot(Tag) - Method in interface nxopen.uf.UFSetup
-
- askGeomsOfSketch(Tag) - Method in interface nxopen.uf.UFSket
-
- AskGeomsOfSketchData() - Constructor for class nxopen.uf.UFSket.AskGeomsOfSketchData
-
- askGlobalSelObjectList() - Method in interface nxopen.uf.UFUi
-
- AskGlobalSelObjectListData() - Constructor for class nxopen.uf.UFUi.AskGlobalSelObjectListData
-
- askGravitationalConstants() - Method in interface nxopen.uf.UFMotion
-
- askGridParameters(UFDisp.GridContext) - Method in interface nxopen.uf.UFDisp
-
- askGridParams(UFVariant) - Method in interface nxopen.uf.UFDrpos
-
- askGrooveOrEdgeGuide(Tag) - Method in interface nxopen.uf.UFWeld
-
- AskGrooveOrEdgeGuideData() - Constructor for class nxopen.uf.UFWeld.AskGrooveOrEdgeGuideData
-
- askGroup(String) - Method in interface nxopen.uf.UFClone
-
- askGroupData(Tag) - Method in interface nxopen.uf.UFGroup
-
- AskGroupData() - Constructor for class nxopen.uf.UFGroup.AskGroupData
-
- askGroupOfCurve(Tag) - Method in interface nxopen.uf.UFDraw
-
- AskGroupOfCurveData() - Constructor for class nxopen.uf.UFDraw.AskGroupOfCurveData
-
- askGroupOfTag(Tag) - Method in interface nxopen.uf.UFGroup
-
- askGrueblerCount() - Method in interface nxopen.uf.UFMotion
-
- askGuideCurves(Tag) - Method in interface nxopen.uf.UFWeld
-
- AskGuideCurvesData() - Constructor for class nxopen.uf.UFWeld.AskGuideCurvesData
-
- askHalfSxline(Tag) - Method in interface nxopen.uf.UFDraw
-
- AskHalfSxlineData() - Constructor for class nxopen.uf.UFDraw.AskHalfSxlineData
-
- askHandleFromTag(Tag) - Method in interface nxopen.uf.UFTag
-
- askHandleOfTag(Tag) - Method in interface nxopen.uf.UFTag
-
- askHarnessComps(Tag) - Method in interface nxopen.uf.UFRoute
-
- AskHarnessCompsData() - Constructor for class nxopen.uf.UFRoute.AskHarnessCompsData
-
- askHarnessWires(Tag) - Method in interface nxopen.uf.UFRoute
-
- AskHarnessWiresData() - Constructor for class nxopen.uf.UFRoute.AskHarnessWiresData
-
- askHatchFillPreferences(UFDrf.HatchFillPreferences) - Method in interface nxopen.uf.UFDrf
-
- askHiddenComps(Tag) - Method in interface nxopen.uf.UFAssem
-
- AskHiddenCompsData() - Constructor for class nxopen.uf.UFAssem.AskHiddenCompsData
-
- askHoleAxis(Tag, UFVariant) - Method in interface nxopen.uf.UFHmop
-
- askHoleDepth(Tag, UFVariant) - Method in interface nxopen.uf.UFHmop
-
- askHoleTop(Tag, UFVariant) - Method in interface nxopen.uf.UFHmop
-
- askHollowData(Tag, int) - Method in interface nxopen.uf.UFModlFeatures
-
- AskHollowData() - Constructor for class nxopen.uf.UFModlFeatures.AskHollowData
-
- askHollowParms(Tag, int) - Method in interface nxopen.uf.UFModlFeatures
-
- askHorzDime(Tag, Tag, int) - Method in interface nxopen.uf.UFModeling
-
- AskHorzDimeData() - Constructor for class nxopen.uf.UFModeling.AskHorzDimeData
-
- askHyperbola(UFVariant) - Method in interface nxopen.uf.UFEval
-
- askIconScaleFactor(double) - Method in interface nxopen.uf.UFMotion
-
- askIdDisplayRule() - Method in interface nxopen.uf.UFUgmgr
-
- askIdealizeParmExp(UFVariant, UFSf.IdealizeParmExp) - Method in interface nxopen.uf.UFSf
-
- askIdealizeParmFaces(UFVariant, UFSf.IdealizeParmFace) - Method in interface nxopen.uf.UFSf
-
- AskIdealizeParmFacesData() - Constructor for class nxopen.uf.UFSf.AskIdealizeParmFacesData
-
- askIdealizeRegion(UFVariant, Tag) - Method in interface nxopen.uf.UFSf
-
- AskIdealizeRegionData() - Constructor for class nxopen.uf.UFSf.AskIdealizeRegionData
-
- askIdSymbolGeometry(Tag) - Method in interface nxopen.uf.UFDrf
-
- AskIdSymbolGeometryData() - Constructor for class nxopen.uf.UFDrf.AskIdSymbolGeometryData
-
- askIdSymbolInfo(Tag) - Method in interface nxopen.uf.UFDrf
-
- AskIdSymbolInfoData() - Constructor for class nxopen.uf.UFDrf.AskIdSymbolInfoData
-
- askIdSymbolType(Tag) - Method in interface nxopen.uf.UFDrf
-
- askIfDegofExists(UFVariant, String) - Method in interface nxopen.uf.UFSim
-
- askImageData(Tag) - Method in interface nxopen.uf.UFDrf
-
- askImmediateChildren() - Method in interface nxopen.uf.UFModeling
-
- askImmediateUpdate(UFVariant) - Method in interface nxopen.uf.UFSim
-
- askImprEdges(Tag) - Method in interface nxopen.uf.UFModlFeatures
-
- AskImprEdgesData() - Constructor for class nxopen.uf.UFModlFeatures.AskImprEdgesData
-
- askImprFacesParms(Tag) - Method in interface nxopen.uf.UFModlFeatures
-
- askImprLoopParms(Tag) - Method in interface nxopen.uf.UFModlFeatures
-
- askIndexDisplay() - Method in interface nxopen.uf.UFGdt
-
- askIndexOfMemberName(String) - Method in interface nxopen.PartFamilyManager
-
- askInferredConsOfSketch(Tag) - Method in interface nxopen.uf.UFSket
-
- AskInferredConsOfSketchData() - Constructor for class nxopen.uf.UFSket.AskInferredConsOfSketchData
-
- askInfoUnits() - Method in interface nxopen.uf.UFUi
-
- askInheritedParams(Tag) - Method in interface nxopen.uf.UFParam
-
- AskInheritedParamsData() - Constructor for class nxopen.uf.UFParam.AskInheritedParamsData
-
- askInitJunctionXform(UFVariant, String) - Method in interface nxopen.uf.UFSim
-
- AskInitJunctionXformData() - Constructor for class nxopen.uf.UFSim.AskInitJunctionXformData
-
- askInsetFlangeParms(Tag) - Method in interface nxopen.uf.UFModlSmd
-
- askInstance(UFVariant) - Method in interface nxopen.uf.UFKf
-
- askInstance(Tag) - Method in interface nxopen.uf.UFModlGeneral
-
- askInstanceClass(String) - Method in interface nxopen.uf.UFKf
-
- askInstanceData(Tag) - Method in interface nxopen.uf.UFFam
-
- AskInstanceData() - Constructor for class nxopen.uf.UFFam.AskInstanceData
-
- askInstanceDisplayInformation() - Method in interface nxopen.uf.UFGdt
-
- askInstanceIntent(Tag) - Method in interface nxopen.uf.UFAssem
-
- askInstanceIset(Tag) - Method in interface nxopen.uf.UFModlGeneral
-
- askInstanceOfArgs(UFVariant[], int) - Method in interface nxopen.uf.UFKf
-
- askInstanceOfName(Tag, String) - Method in interface nxopen.uf.UFAssem
-
- askInstancesOfFeature(Tag) - Method in interface nxopen.uf.UFModeling
-
- AskInstancesOfFeatureData() - Constructor for class nxopen.uf.UFModeling.AskInstancesOfFeatureData
-
- askInstOfPartOcc(Tag) - Method in interface nxopen.uf.UFAssem
-
- askIntArray(UFVariant, String, int, int[]) - Method in interface nxopen.uf.UFMom
-
- askIntCurveParents(Tag) - Method in interface nxopen.uf.UFCurve
-
- AskIntCurveParentsData() - Constructor for class nxopen.uf.UFCurve.AskIntCurveParentsData
-
- askIntCurves(Tag) - Method in interface nxopen.uf.UFCurve
-
- AskIntCurvesData() - Constructor for class nxopen.uf.UFCurve.AskIntCurvesData
-
- askInteger(UFVariant) - Method in interface nxopen.uf.UFKf
-
- askInteger(UFVariant, String) - Method in interface nxopen.uf.UFUde
-
- askIntegerOfCriteria(Tag, UFVariant, String) - Method in interface nxopen.uf.UFFbmGeom
-
- askIntegerValue(UFCamPref.CamPref) - Method in interface nxopen.uf.UFCamPref
-
- askIntegerValueOfAttribute(UFVariant, String) - Method in interface nxopen.uf.UFMfm
-
- AskIntegerValueOfAttributeData() - Constructor for class nxopen.uf.UFMfm.AskIntegerValueOfAttributeData
-
- askInterfData(Tag, Tag, Tag) - Method in interface nxopen.uf.UFClear
-
- askInterference(Tag) - Method in interface nxopen.uf.UFMotion
-
- askInterpartLhsName(Expression) - Method in interface nxopen.ExpressionCollection
-
Creates the left hand side name for an overriding interpart expression reference.
- askInterpartRhsName(Expression) - Method in interface nxopen.ExpressionCollection
-
Creates the right hand side name for an interpart expression reference.
- askInterpFromParam(UFVariant) - Method in interface nxopen.uf.UFMom
-
- askInterpolationData(FEElement) - Method in interface nxopen.cae.ElementAssociatedDataUtils
-
Returns interpolation element associated data.
- AskInterpolationData() - Constructor for class nxopen.cae.ElementAssociatedDataUtils.AskInterpolationData
-
- askIntersectionPlates(TaggedObject, TaggedObject[], double) - Method in interface nxopen.shipdesign.Generator
-
Gets all intersected plates with the given plates.
- askIntParms(Tag) - Method in interface nxopen.uf.UFCurve
-
- AskIntParmsData() - Constructor for class nxopen.uf.UFCurve.AskIntParmsData
-
- askIntParmsSc(Tag) - Method in interface nxopen.uf.UFCurve
-
- AskIntParmsScData() - Constructor for class nxopen.uf.UFCurve.AskIntParmsScData
-
- askIntValue(Tag, int) - Method in interface nxopen.uf.UFParam
-
- askIntValueOfClassifiedCrit(Tag, String, UFVariant, int) - Method in interface nxopen.uf.UFFbmGeom
-
- askIntVla(Tag, int) - Method in interface nxopen.uf.UFParam
-
- AskIntVlaData() - Constructor for class nxopen.uf.UFParam.AskIntVlaData
-
- askIsetArrayData(Tag) - Method in interface nxopen.uf.UFAssem
-
- AskIsetArrayData() - Constructor for class nxopen.uf.UFAssem.AskIsetArrayData
-
- askIsJunctionDependent(UFVariant, String, String) - Method in interface nxopen.uf.UFSim
-
- askIsJunctionExist(UFVariant, String) - Method in interface nxopen.uf.UFSim
-
- askIsocline(Tag) - Method in interface nxopen.uf.UFCurve
-
- AskIsoclineData() - Constructor for class nxopen.uf.UFCurve.AskIsoclineData
-
- askItemEntity(UFVariant) - Method in interface nxopen.uf.UFCambnd
-
- askItemEntity(UFVariant) - Method in interface nxopen.uf.UFCamgeom
-
- askItemMaxmin(Tag, UFCam.GeomType, Tag) - Method in interface nxopen.uf.UFCamgeom
-
- askItems(Tag, UFCam.GeomType) - Method in interface nxopen.uf.UFCamgeom
-
- AskItemsData() - Constructor for class nxopen.uf.UFCamgeom.AskItemsData
-
- askItemType(String) - Method in interface nxopen.uf.UFClone
-
- askIterations(int) - Method in interface nxopen.cae.Result
-
Number of iterations available for a given loadcase and their descriptions
Iteration index varies from 0 to N-1 (number of iterations)
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- askIwDecimalPlaces() - Method in interface nxopen.uf.UFUi
-
- AskIwDecimalPlacesData() - Constructor for class nxopen.uf.UFUi.AskIwDecimalPlacesData
-
- askJoinedParms(Tag) - Method in interface nxopen.uf.UFCurve
-
- AskJoinedParmsData() - Constructor for class nxopen.uf.UFCurve.AskJoinedParmsData
-
- askJoint(Tag) - Method in interface nxopen.uf.UFMotion
-
- askJointCoupler(Tag) - Method in interface nxopen.uf.UFMotion
-
- askJointLimits(Tag) - Method in interface nxopen.uf.UFMotion
-
- askJointMotionInput(Tag) - Method in interface nxopen.uf.UFMotion
-
- askJournalData() - Method in interface nxopen.uf.UFPs
-
- AskJournalData() - Constructor for class nxopen.uf.UFPs.AskJournalData
-
- askJtInfoOfPart(Tag) - Method in interface nxopen.uf.UFPart
-
- AskJtInfoOfPartData() - Constructor for class nxopen.uf.UFPart.AskJtInfoOfPartData
-
- askJunctionXform(UFVariant, String) - Method in interface nxopen.uf.UFSim
-
- AskJunctionXformData() - Constructor for class nxopen.uf.UFSim.AskJunctionXformData
-
- askKernelVersion(UFPs.KernelVersion) - Method in interface nxopen.uf.UFPs
-
- askKeywordName(Tag, int) - Method in interface nxopen.uf.UFGdt
-
- askKeywordText(Tag, String) - Method in interface nxopen.uf.UFGdt
-
- askKimCompNameById(UFVariant, int, String) - Method in interface nxopen.uf.UFSim
-
- askLabelInfo(Tag) - Method in interface nxopen.uf.UFDrf
-
- AskLabelInfoData() - Constructor for class nxopen.uf.UFDrf.AskLabelInfoData
-
- askLabelOfDatum(Tag) - Method in interface nxopen.uf.UFGdt
-
- askLanguage(Tag) - Method in interface nxopen.uf.UFSf
-
- AskLanguageData() - Constructor for class nxopen.uf.UFSf.AskLanguageData
-
- askLanguageNx(Tag, String) - Method in interface nxopen.uf.UFSfl
-
- askLastFilter(Tag) - Method in interface nxopen.uf.UFAssem
-
- AskLastFilterData() - Constructor for class nxopen.uf.UFAssem.AskLastFilterData
-
- askLastModifiedVersion(Tag) - Method in interface nxopen.uf.UFPart
-
- askLastPickedView() - Method in interface nxopen.uf.UFUi
-
- askLdrMethod(Tag) - Method in interface nxopen.uf.UFPlist
-
- askLeader(Tag, int) - Method in interface nxopen.uf.UFGdt
-
- askLegacyPreferences() - Method in interface nxopen.uf.UFSket
-
- AskLegacyPreferencesData() - Constructor for class nxopen.uf.UFSket.AskLegacyPreferencesData
-
- askLengthParms(Tag) - Method in interface nxopen.uf.UFGexp
-
- AskLengthParmsData() - Constructor for class nxopen.uf.UFGexp.AskLengthParmsData
-
- askLengthTolerance() - Method in interface nxopen.uf.UFRoute
-
- askLetteringPreferences(UFDrf.LetteringPreferences) - Method in interface nxopen.uf.UFDrf
-
- askLevel(UFCutLevels.CutLevels, int) - Method in interface nxopen.uf.UFCutLevels
-
- askLibAttributeValues(UFVariant, Tag, int, String[]) - Method in interface nxopen.uf.UFLib
-
- askLibraryMaterialLwaUserAreaData(String, String) - Method in interface nxopen.uf.UFDisp
-
- askLibraryMaterials(String, String, String) - Method in interface nxopen.uf.UFSf
-
- AskLibraryMaterialsData() - Constructor for class nxopen.uf.UFSf.AskLibraryMaterialsData
-
- askLibref(Tag) - Method in interface nxopen.uf.UFLib
-
- askLimits(UFVariant) - Method in interface nxopen.uf.UFEval
-
- askLine(UFVariant) - Method in interface nxopen.uf.UFEval
-
- askLineArcData(Tag) - Method in interface nxopen.uf.UFCurve
-
- askLineArcOutput(Tag) - Method in interface nxopen.uf.UFCurve
-
- askLinearIsetParms(Tag, int) - Method in interface nxopen.uf.UFModlGeneral
-
- AskLinearIsetParmsData() - Constructor for class nxopen.uf.UFModlGeneral.AskLinearIsetParmsData
-
- askLineArrowPreferences(UFDrf.LineArrowPreferences) - Method in interface nxopen.uf.UFDrf
-
- askLineData(Tag) - Method in interface nxopen.uf.UFCurve
-
- askLink(Tag) - Method in interface nxopen.uf.UFMotion
-
- askLinkAcceptBroken(Tag) - Method in interface nxopen.uf.UFWave
-
- askLinkedExterior(Tag) - Method in interface nxopen.uf.UFModl
-
- AskLinkedExteriorData() - Constructor for class nxopen.uf.UFModl.AskLinkedExteriorData
-
- askLinkedFaceParent(Tag) - Method in interface nxopen.uf.UFWeld
-
- askLinkedFeatSource(Tag) - Method in interface nxopen.uf.UFWeld
-
- askLinkedFeatureGeom(Tag) - Method in interface nxopen.uf.UFWave
-
- askLinkedFeatureInfo(Tag) - Method in interface nxopen.uf.UFWave
-
- askLinkedFeatureMap(Tag, boolean) - Method in interface nxopen.uf.UFWave
-
- AskLinkedFeatureMapData() - Constructor for class nxopen.uf.UFWave.AskLinkedFeatureMapData
-
- askLinkedFeatures(Tag) - Method in interface nxopen.uf.UFGdt
-
- AskLinkedFeaturesData() - Constructor for class nxopen.uf.UFGdt.AskLinkedFeaturesData
-
- askLinkedPtAngle(Tag) - Method in interface nxopen.uf.UFWave
-
- askLinkedPtCurvePrm(Tag) - Method in interface nxopen.uf.UFWave
-
- askLinkFacePlane(Tag, Tag) - Method in interface nxopen.uf.UFModeling
-
- askLinkFaces(Tag) - Method in interface nxopen.uf.UFModeling
-
- AskLinkFacesData() - Constructor for class nxopen.uf.UFModeling.AskLinkFacesData
-
- askLinkInitialVelocity(Tag) - Method in interface nxopen.uf.UFMotion
-
- askLinkMassProperties(Tag) - Method in interface nxopen.uf.UFMotion
-
- askLinkMirrorData(Tag, boolean) - Method in interface nxopen.uf.UFWave
-
- AskLinkMirrorData() - Constructor for class nxopen.uf.UFWave.AskLinkMirrorData
-
- askLinkObjects(Tag) - Method in interface nxopen.uf.UFProcessAid
-
- AskLinkObjectsData() - Constructor for class nxopen.uf.UFProcessAid.AskLinkObjectsData
-
- askLinkRegionSources(Tag, boolean) - Method in interface nxopen.uf.UFWave
-
- AskLinkRegionSourcesData() - Constructor for class nxopen.uf.UFWave.AskLinkRegionSourcesData
-
- askLinkSource(Tag, boolean) - Method in interface nxopen.uf.UFWave
-
- askLinkTransfromForGivenFrame(Tag, int) - Method in interface nxopen.uf.UFMotion
-
- askLinkUpdateTime(Tag, boolean) - Method in interface nxopen.uf.UFWave
-
- askLinkXform(Tag) - Method in interface nxopen.uf.UFWave
-
- askList(UFVariant) - Method in interface nxopen.uf.UFKf
-
- askListCount(UFVariant) - Method in interface nxopen.uf.UFKf
-
- askListCount(Tag[]) - Method in interface nxopen.uf.UFModlGeneral
-
- askListItem(UFVariant, int) - Method in interface nxopen.uf.UFKf
-
- askListItem(Tag[], int) - Method in interface nxopen.uf.UFModlGeneral
-
- askListOfFaces(UFVariant) - Method in interface nxopen.uf.UFMfm
-
- AskListOfFacesData() - Constructor for class nxopen.uf.UFMfm.AskListOfFacesData
-
- askListOfFeatureNames(Tag) - Method in interface nxopen.uf.UFFbmGeom
-
- AskListOfFeatureNamesData() - Constructor for class nxopen.uf.UFFbmGeom.AskListOfFeatureNamesData
-
- askListOfInstance(String) - Method in interface nxopen.uf.UFKf
-
- askLoadcases() - Method in interface nxopen.cae.Result
-
Number of loadcases available in the result file and their descriptions.
- askLoadComponentFlag() - Method in interface nxopen.uf.UFGdt
-
- askLoadDescriptorNameNx(Tag) - Method in interface nxopen.uf.UFSfl
-
- askLoadDescriptorNx(Tag, String) - Method in interface nxopen.uf.UFSfl
-
- askLoadedBendTables() - Method in interface nxopen.uf.UFRoute
-
- AskLoadedBendTablesData() - Constructor for class nxopen.uf.UFRoute.AskLoadedBendTablesData
-
- askLocalScale(Tag) - Method in interface nxopen.uf.UFModlFeatures
-
- AskLocalScaleData() - Constructor for class nxopen.uf.UFModlFeatures.AskLocalScaleData
-
- askLocked(Tag, String) - Method in interface nxopen.uf.UFAttr
-
- askLockStatus() - Method in interface nxopen.uf.UFUi
-
- askLockStatus() - Method in interface nxopen.UI
-
Query NX lock status.
- askLogfile() - Method in interface nxopen.uf.UFClone
-
- askLogicalOfCriteria(Tag, UFVariant, String) - Method in interface nxopen.uf.UFFbmGeom
-
- askLogicalValue(UFCamPref.CamPref) - Method in interface nxopen.uf.UFCamPref
-
- askLogicalValue(Tag, int) - Method in interface nxopen.uf.UFParam
-
- askLogicalValueOfAttribute(UFVariant, String) - Method in interface nxopen.uf.UFMfm
-
- AskLogicalValueOfAttributeData() - Constructor for class nxopen.uf.UFMfm.AskLogicalValueOfAttributeData
-
- askLogicalValueOfClassifiedCrit(Tag, String, UFVariant, int) - Method in interface nxopen.uf.UFFbmGeom
-
- askLowerLimitPlaneData(Tag) - Method in interface nxopen.uf.UFCam
-
- AskLowerLimitPlaneData() - Constructor for class nxopen.uf.UFCam.AskLowerLimitPlaneData
-
- askLowerLimitPlaneStatus(Tag) - Method in interface nxopen.uf.UFCam
-
- askLowerLimitPlaneTag(Tag) - Method in interface nxopen.uf.UFCam
-
- askLowerLimitPlaneUsage(Tag) - Method in interface nxopen.uf.UFCam
-
- askLumpedMassData(FEElement) - Method in interface nxopen.cae.ElementAssociatedDataUtils
-
Returns lumped mass element associated data.
- AskLumpedMassData() - Constructor for class nxopen.cae.ElementAssociatedDataUtils.AskLumpedMassData
-
- askLvNx(Tag) - Method in interface nxopen.uf.UFSf
-
- AskLvNxData() - Constructor for class nxopen.uf.UFSf.AskLvNxData
-
- askMachinedStatus(UFVariant, Tag) - Method in interface nxopen.uf.UFMfm
-
- askMachiningFeaturesOfPart(Tag) - Method in interface nxopen.uf.UFMfm
-
- AskMachiningFeaturesOfPartData() - Constructor for class nxopen.uf.UFMfm.AskMachiningFeaturesOfPartData
-
- askMachiningFeaturesOfType(Tag, String) - Method in interface nxopen.uf.UFMfm
-
- AskMachiningFeaturesOfTypeData() - Constructor for class nxopen.uf.UFMfm.AskMachiningFeaturesOfTypeData
-
- askMachiningFeatureTypes(Tag) - Method in interface nxopen.uf.UFMfm
-
- AskMachiningFeatureTypesData() - Constructor for class nxopen.uf.UFMfm.AskMachiningFeatureTypesData
-
- askMachiningMode(Tag) - Method in interface nxopen.uf.UFOper
-
- askMachToolDbObject() - Method in interface nxopen.uf.UFCam
-
- askMajorDiaFeatureOfSplineGear(Tag) - Method in interface nxopen.uf.UFGdt
-
- askMarker(Tag) - Method in interface nxopen.uf.UFMotion
-
- askMarkExist(int, String) - Method in interface nxopen.uf.UFUndo
-
- askMarkVisibility(int, String) - Method in interface nxopen.uf.UFUndo
-
- askMassProps3d(Tag[], int, int, int, double, int, double[]) - Method in interface nxopen.uf.UFModeling
-
- AskMassProps3dData() - Constructor for class nxopen.uf.UFModeling.AskMassProps3dData
-
- askMaster(Tag) - Method in interface nxopen.uf.UFModlGeneral
-
- askMatchingFaceInInstance(Tag, Tag) - Method in interface nxopen.uf.UFModeling
-
- askMaterial(Tag) - Method in interface nxopen.uf.UFDisp
-
- AskMaterialData() - Constructor for class nxopen.uf.UFDisp.AskMaterialData
-
- askMaterialProperties() - Method in interface nxopen.uf.UFDie
-
- AskMaterialPropertiesData() - Constructor for class nxopen.uf.UFDie.AskMaterialPropertiesData
-
- askMaterialsInPart(Tag, UFDisp.MaterialFormatType) - Method in interface nxopen.uf.UFDisp
-
- AskMaterialsInPartData() - Constructor for class nxopen.uf.UFDisp.AskMaterialsInPartData
-
- askMaterialType(Tag) - Method in interface nxopen.uf.UFSf
-
- askMatrixOfObject(Tag) - Method in interface nxopen.uf.UFCsys
-
- askMatrixOfXform(Tag) - Method in interface nxopen.uf.UFSo
-
- askMatrixValues(Tag) - Method in interface nxopen.uf.UFCsys
-
- askMaxCurvature(Tag, double[], int) - Method in interface nxopen.uf.UFModeling
-
- AskMaxCurvatureData() - Constructor for class nxopen.uf.UFModeling.AskMaxCurvatureData
-
- askMaxFacetVerts(Tag) - Method in interface nxopen.uf.UFFacet
-
- askMaximum() - Method in interface nxopen.cae.ResultAccess
-
Ask maximum value of current result state defined by
ResultParameters
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
Created in NX6.0.2
- askMcArrayData(Tag) - Method in interface nxopen.uf.UFAssem
-
- AskMcArrayData() - Constructor for class nxopen.uf.UFAssem.AskMcArrayData
-
- askMctNull(Tag) - Method in interface nxopen.uf.UFSetup
-
- askMctRoot(Tag) - Method in interface nxopen.uf.UFSetup
-
- askMeasurement(Tag) - Method in interface nxopen.uf.UFMotion
-
- askMeasureOfValue(UFVariant) - Method in interface nxopen.uf.UFKf
-
- askMemberColumnData(Tag, int) - Method in interface nxopen.uf.UFFam
-
- askMemberInList(Tag, int) - Method in interface nxopen.uf.UFNcgroup
-
- askMemberItems(Tag) - Method in interface nxopen.uf.UFRouteRun
-
- AskMemberItemsData() - Constructor for class nxopen.uf.UFRouteRun.AskMemberItemsData
-
- askMemberList(Tag) - Method in interface nxopen.uf.UFNcgroup
-
- AskMemberListData() - Constructor for class nxopen.uf.UFNcgroup.AskMemberListData
-
- askMemberRowData(Tag, int) - Method in interface nxopen.uf.UFFam
-
- askMembersInReferenceSet() - Method in interface nxopen.ReferenceSet
-
Query of reference set members.
- askMergedFaces(Tag) - Method in interface nxopen.uf.UFModeling
-
- AskMergedFacesData() - Constructor for class nxopen.uf.UFModeling.AskMergedFacesData
-
- askMergeInfo(Tag) - Method in interface nxopen.uf.UFTabnot
-
- AskMergeInfoData() - Constructor for class nxopen.uf.UFTabnot.AskMergeInfoData
-
- askMeshDimension(Tag) - Method in interface nxopen.uf.UFSf
-
- askMeshMatingCondition(Tag) - Method in interface nxopen.uf.UFSf
-
- AskMeshMatingConditionData() - Constructor for class nxopen.uf.UFSf.AskMeshMatingConditionData
-
- askMeshVisuals(Tag) - Method in interface nxopen.uf.UFSf
-
- askMethodGroup(Tag) - Method in interface nxopen.uf.UFOper
-
- askMidsrfFeatureCreateMethod(Tag) - Method in interface nxopen.uf.UFModlFeatures
-
- askMidsrfFrecType(Tag) - Method in interface nxopen.uf.UFSf
-
- askMidsrfParms(Tag) - Method in interface nxopen.uf.UFModlFeatures
-
- askMinimalGraphicsWindow() - Method in interface nxopen.uf.UFUi
-
- askMinimum() - Method in interface nxopen.cae.ResultAccess
-
Ask minimum value of current result state defined by
ResultParameters
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
Created in NX6.0.2
- askMinimumDist(Tag, Tag, int, double[], int, double[]) - Method in interface nxopen.uf.UFModeling
-
- askMinimumDist2(Tag, Tag, int, double[], int, double[]) - Method in interface nxopen.uf.UFModeling
-
- AskMinimumDist2Data() - Constructor for class nxopen.uf.UFModeling.AskMinimumDist2Data
-
- askMinimumDist3(int, Tag, Tag, int, double[], int, double[]) - Method in interface nxopen.uf.UFModeling
-
- AskMinimumDist3Data() - Constructor for class nxopen.uf.UFModeling.AskMinimumDist3Data
-
- AskMinimumDistData() - Constructor for class nxopen.uf.UFModeling.AskMinimumDistData
-
- askMinimumFaceDist(UFVariant, double[]) - Method in interface nxopen.uf.UFEvalsf
-
- askMinMaxLocation() - Method in interface nxopen.cae.ResultAccess
-
Ask Min and Max value of current result state defined by
ResultParameters
If the
Result.Location
is nodal or elemental then ID will be node and element respectively.
- AskMinMaxLocationData() - Constructor for class nxopen.cae.ResultAccess.AskMinMaxLocationData
-
- askMinorDiaFeatureOfSplineGear(Tag) - Method in interface nxopen.uf.UFGdt
-
- askMinorVersion(Tag) - Method in interface nxopen.uf.UFPart
-
- askMirrorPatternFace(Tag) - Method in interface nxopen.uf.UFModlFeatures
-
- AskMirrorPatternFaceData() - Constructor for class nxopen.uf.UFModlFeatures.AskMirrorPatternFaceData
-
- askMisalignGeometry(Tag, double, double) - Method in interface nxopen.uf.UFModeling
-
- askModelBounds(Tag) - Method in interface nxopen.uf.UFDisp
-
- askModelBoundsTag() - Method in interface nxopen.uf.UFDisp
-
- askModelParameters(Tag) - Method in interface nxopen.uf.UFFacet
-
- askModelsOfSolid(Tag) - Method in interface nxopen.uf.UFFacet
-
- AskModelsOfSolidData() - Constructor for class nxopen.uf.UFFacet.AskModelsOfSolidData
-
- askModlFeatures(Tag) - Method in interface nxopen.uf.UFGdt
-
- AskModlFeaturesData() - Constructor for class nxopen.uf.UFGdt.AskModlFeaturesData
-
- askMom(UFVariant) - Method in interface nxopen.uf.UFMom
-
- askMoveRegion(Tag) - Method in interface nxopen.uf.UFModlFeatures
-
- AskMoveRegionData() - Constructor for class nxopen.uf.UFModlFeatures.AskMoveRegionData
-
- askMtcsJunction(UFVariant) - Method in interface nxopen.uf.UFSim
-
- askMtdUnits(UFVariant) - Method in interface nxopen.uf.UFSim
-
- askMthdNull(Tag) - Method in interface nxopen.uf.UFSetup
-
- askMthdRoot(Tag) - Method in interface nxopen.uf.UFSetup
-
- askMultiportStrings(Tag) - Method in interface nxopen.uf.UFRoute
-
- AskMultiportStringsData() - Constructor for class nxopen.uf.UFRoute.AskMultiportStringsData
-
- askMultiportTags(Tag) - Method in interface nxopen.uf.UFRoute
-
- AskMultiportTagsData() - Constructor for class nxopen.uf.UFRoute.AskMultiportTagsData
-
- askMultiportTerminals(Tag) - Method in interface nxopen.uf.UFRoute
-
- AskMultiportTerminalsData() - Constructor for class nxopen.uf.UFRoute.AskMultiportTerminalsData
-
- askMultiportTermname(Tag) - Method in interface nxopen.uf.UFRoute
-
- askName(UFVariant) - Method in interface nxopen.uf.UFKf
-
- askName(Tag) - Method in interface nxopen.uf.UFObj
-
- askName(UFVariant) - Method in interface nxopen.uf.UFOper
-
- askName(UFVariant) - Method in interface nxopen.uf.UFUde
-
- askNameChainOfInstance(UFVariant) - Method in interface nxopen.uf.UFKf
-
- askNamedBodyObject(Tag, int, String) - Method in interface nxopen.uf.UFModeling
-
- askNameDisplay() - Method in interface nxopen.uf.UFMotion
-
- askNameDisplayStatus() - Method in interface nxopen.uf.UFDisp
-
- askNameFromTag(Tag) - Method in interface nxopen.uf.UFOper
-
- askNameOfArrangement(Tag) - Method in interface nxopen.uf.UFAssem
-
- askNameOfString(String) - Method in interface nxopen.uf.UFKf
-
- askNameOrigin(Tag) - Method in interface nxopen.uf.UFObj
-
- askNameViewStatus() - Method in interface nxopen.uf.UFDisp
-
- askNaming(String) - Method in interface nxopen.uf.UFClone
-
- AskNamingData() - Constructor for class nxopen.uf.UFClone.AskNamingData
-
- askNarrowDimensionData(Tag) - Method in interface nxopen.uf.UFDrf
-
- askNcAxesOfMtool(UFVariant) - Method in interface nxopen.uf.UFSim
-
- AskNcAxesOfMtoolData() - Constructor for class nxopen.uf.UFSim.AskNcAxesOfMtoolData
-
- askNestedAssyParentComp(Tag) - Method in interface nxopen.uf.UFPlist
-
- askNestedFrecs(Tag) - Method in interface nxopen.uf.UFModeling
-
- askNewTagOfEntity(Tag) - Method in interface nxopen.uf.UFTag
-
- askNextDataset(Tag, Tag) - Method in interface nxopen.uf.UFClear
-
- askNextDir(Tag) - Method in interface nxopen.uf.UFDirpath
-
- askNextElementLabel(int) - Method in interface nxopen.cae.FEElementLabelMap
-
Returns the next
FEElement
label from the input put label.
- askNextFeature(Tag) - Method in interface nxopen.uf.UFModlGeneral
-
- askNextInterf(Tag, Tag, Tag) - Method in interface nxopen.uf.UFClear
-
- AskNextInterfData() - Constructor for class nxopen.uf.UFClear.AskNextInterfData
-
- askNextNodeLabel(int) - Method in interface nxopen.cae.FENodeLabelMap
-
Returns the next
FENode
label from the input put label.
- askNextVisMark() - Method in interface nxopen.uf.UFUndo
-
- askNFacetsInModel(Tag) - Method in interface nxopen.uf.UFFacet
-
- askNmColumns(Tag) - Method in interface nxopen.uf.UFTabnot
-
- askNmCopy(String) - Method in interface nxopen.uf.UFClone
-
- askNmHeaderRows(Tag) - Method in interface nxopen.uf.UFTabnot
-
- askNMinMaxLocation(int) - Method in interface nxopen.cae.ResultAccess
-
Ask for the N extreme Min and Max values and the location of current result state defined by
ResultParameters
.
- AskNMinMaxLocationData() - Constructor for class nxopen.cae.ResultAccess.AskNMinMaxLocationData
-
- askNmRows(Tag) - Method in interface nxopen.uf.UFTabnot
-
- askNmRowsInSection(Tag) - Method in interface nxopen.uf.UFTabnot
-
- askNmSections(Tag) - Method in interface nxopen.uf.UFTabnot
-
- askNodalResult(int) - Method in interface nxopen.cae.ResultAccess
-
Ask current component value at a specified node index
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- askNodalResult(int[]) - Method in interface nxopen.cae.ResultAccess
-
Ask current component value at a specified node indices
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- askNodalResultAllComponents(int) - Method in interface nxopen.cae.ResultAccess
-
Ask all component values at a specified node index
Use
ResultAccess.askResultComponents()
to query type of components
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
Created in NX6.0.2
- askNode(Tag) - Method in interface nxopen.uf.UFSf
-
- askNodeCoordinates(int[]) - Method in interface nxopen.cae.Result
-
Asks for the coordinates of a node array
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- AskNodeData() - Constructor for class nxopen.uf.UFSf.AskNodeData
-
- askNodeIndex(int) - Method in interface nxopen.cae.Result
-
Ask node index of a given node user label
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- askNodeIndicesOnElementEdge(int, int) - Method in interface nxopen.cae.Result
-
Returns number of nodes and node Indices on given element index and edge index.
- askNodeIndicesOnElementFace(int, int) - Method in interface nxopen.cae.Result
-
Returns number of nodes and node Indices on given element index and face index.
- askNodeLabel(int) - Method in interface nxopen.cae.Result
-
Ask node user label of a given node index
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- askNodeLabelUsed(int) - Method in interface nxopen.cae.FENodeLabelMap
-
Indicates whether input node label is already used or not
License requirements: nx_masterfem ("Finite Element Modeling")
.
- askNodePgeoms(Tag) - Method in interface nxopen.uf.UFSf
-
- AskNodePgeomsData() - Constructor for class nxopen.uf.UFSf.AskNodePgeomsData
-
- askNonFeatureEdgeSelection() - Method in interface nxopen.uf.UFGdt
-
- askNormalsOfFacet(Tag, int) - Method in interface nxopen.uf.UFFacet
-
- AskNormalsOfFacetData() - Constructor for class nxopen.uf.UFFacet.AskNormalsOfFacetData
-
- askNtfyCallbacks() - Method in interface nxopen.uf.UFClone
-
- AskNtfyCallbacksData() - Constructor for class nxopen.uf.UFClone.AskNtfyCallbacksData
-
- askNthBcDescriptorNx(Tag, int) - Method in interface nxopen.uf.UFSfl
-
- askNthColumn(Tag, int) - Method in interface nxopen.uf.UFTabnot
-
- askNthDir(Tag, int) - Method in interface nxopen.uf.UFDirpath
-
- askNthDisplayableAttributeName(int) - Method in interface nxopen.cae.ftk.IApplicationData
-
Asks the name of a displayable attribute
License requirements: None.
- askNthDisplayableAttributeValue(int) - Method in interface nxopen.cae.ftk.IApplicationData
-
Asks the value of a displayable attribute
License requirements: None.
- askNthDursolNx(int) - Method in interface nxopen.uf.UFSf
-
- askNthElementDescriptorNx(Tag, int) - Method in interface nxopen.uf.UFSfl
-
- askNthHeaderRow(Tag, int) - Method in interface nxopen.uf.UFTabnot
-
- askNthHistory(UFVariant, int) - Method in interface nxopen.uf.UFPart
-
- AskNthHistoryData() - Constructor for class nxopen.uf.UFPart.AskNthHistoryData
-
- askNthLanguageNx(Tag, int) - Method in interface nxopen.uf.UFSfl
-
- askNthLoadDescriptorNx(Tag, int) - Method in interface nxopen.uf.UFSfl
-
- askNthMeshRecipe(Tag, int) - Method in interface nxopen.uf.UFSf
-
- askNthPart(int) - Method in interface nxopen.uf.UFPart
-
- askNthRow(Tag, int) - Method in interface nxopen.uf.UFTabnot
-
- askNthRowInSection(Tag, int) - Method in interface nxopen.uf.UFTabnot
-
- askNthSection(Tag, int) - Method in interface nxopen.uf.UFTabnot
-
- askNthSolutionDescriptorNx(Tag, int) - Method in interface nxopen.uf.UFSfl
-
- askNthSolutionNx(int) - Method in interface nxopen.uf.UFSf
-
- askNthSolverNx(int) - Method in interface nxopen.uf.UFSfl
-
- askNumBcDescriptorsNx(Tag) - Method in interface nxopen.uf.UFSfl
-
- askNumber(UFVariant) - Method in interface nxopen.uf.UFKf
-
- askNumberBlocks(Tag) - Method in interface nxopen.uf.UFDrf
-
- askNumberOfAnimationFrames() - Method in interface nxopen.uf.UFMotion
-
- askNumberOfBoundaries(Tag) - Method in interface nxopen.uf.UFBound
-
- askNumberOfDisplayableAttributes() - Method in interface nxopen.cae.ftk.IApplicationData
-
Asks the count of attributes which could be showed on legend table
License requirements: None.
- askNumberOfFonts(Tag) - Method in interface nxopen.uf.UFUgfont
-
- askNumberOfMarks(UFUndo.UserVisibility) - Method in interface nxopen.uf.UFUndo
-
- askNumberOfSectors() - Method in interface nxopen.cae.Result
-
Returns number of sectors for cyclic symmetric solution
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- askNumberOfWelds(Tag) - Method in interface nxopen.uf.UFWeld
-
- askNumberRowsInCallout(Tag) - Method in interface nxopen.uf.UFDrf
-
- askNumDrawings() - Method in interface nxopen.uf.UFDraw
-
- askNumDursolsNx() - Method in interface nxopen.uf.UFSf
-
- askNumEdgesOnElement(int) - Method in interface nxopen.cae.Result
-
Returns number of edges on given element index
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- askNumElementDescriptorsNx(Tag) - Method in interface nxopen.uf.UFSfl
-
- askNumElements() - Method in interface nxopen.cae.Result
-
Ask number of elements in the model
Element index varies from 0 to N-1 (number of elements)
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- askNumElementsOfGroup(Result.GroupContainer, int) - Method in interface nxopen.cae.Result
-
Returns an array of elements indices for a given group
Group index range from 0 to N-1 (number of groups)
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- askNumFaces(Tag) - Method in interface nxopen.uf.UFFacet
-
- askNumFacesOnElement(int) - Method in interface nxopen.cae.Result
-
Returns number of faces on given element index
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- askNumFacetsInFace(Tag, int) - Method in interface nxopen.uf.UFFacet
-
- askNumGroupsInContainer(Result.GroupContainer) - Method in interface nxopen.cae.Result
-
Returns the number of groups available in the model of type
Result.GroupContainer
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
Created in NX6.0.2
- askNumHistories(UFVariant) - Method in interface nxopen.uf.UFPart
-
- askNumIterations(int) - Method in interface nxopen.cae.Result
-
Number of iterations available for a given loadcase.
- askNumLanguagesNx(Tag) - Method in interface nxopen.uf.UFSfl
-
- askNumLeaders(Tag) - Method in interface nxopen.uf.UFGdt
-
- askNumLists(Tag) - Method in interface nxopen.uf.UFClear
-
- askNumLoadcases() - Method in interface nxopen.cae.Result
-
Number of loadcases available in the result file
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- askNumLoadDescriptorsNx(Tag) - Method in interface nxopen.uf.UFSfl
-
- askNumMeshRecipes(Tag) - Method in interface nxopen.uf.UFSf
-
- askNumNodes() - Method in interface nxopen.cae.Result
-
Ask number of nodes in the model
Node index varies from 1 to N (number of nodes)
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- askNumParts() - Method in interface nxopen.uf.UFPart
-
- askNumSolutionDescriptorsNx(Tag) - Method in interface nxopen.uf.UFSfl
-
- askNumSolutionsNx() - Method in interface nxopen.uf.UFSf
-
- askNumSolversNx() - Method in interface nxopen.uf.UFSfl
-
- askNumVertsInFacet(Tag, int) - Method in interface nxopen.uf.UFFacet
-
- askNumViews(Tag) - Method in interface nxopen.uf.UFDraw
-
- askNxClassesEnabled(Tag) - Method in interface nxopen.uf.UFKf
-
- askObjAllButList(Tag, int) - Method in interface nxopen.uf.UFClear
-
- AskObjAllButListData() - Constructor for class nxopen.uf.UFClear.AskObjAllButListData
-
- askObjBendRadius(Tag) - Method in interface nxopen.uf.UFRoute
-
- AskObjBendRadiusData() - Constructor for class nxopen.uf.UFRoute.AskObjBendRadiusData
-
- AskObjBendRadiusReturn - Variable in class nxopen.uf.UFRoute.AskObjBendRadiusData
-
- askObjCornerInfo(Tag) - Method in interface nxopen.uf.UFRoute
-
- AskObjCornerInfoData() - Constructor for class nxopen.uf.UFRoute.AskObjCornerInfoData
-
- AskObjCornerInfoReturn - Variable in class nxopen.uf.UFRoute.AskObjCornerInfoData
-
- askObjDimensionality(Tag) - Method in interface nxopen.uf.UFModeling
-
- AskObjDimensionalityData() - Constructor for class nxopen.uf.UFModeling.AskObjDimensionalityData
-
- askObject(int, int, Tag) - Method in interface nxopen.uf.UFModlGeneral
-
- askObjectClearZone(Tag, Tag) - Method in interface nxopen.uf.UFClear
-
- AskObjectClearZoneData() - Constructor for class nxopen.uf.UFClear.AskObjectClearZoneData
-
- askObjectFeat(Tag) - Method in interface nxopen.uf.UFModeling
-
- askObjectOfName(Tag, String) - Method in interface nxopen.uf.UFNcgroup
-
- askObjectOfPsTag(Tag) - Method in interface nxopen.uf.UFPs
-
- askObjectPort(Tag) - Method in interface nxopen.uf.UFRoute
-
- AskObjectPortData() - Constructor for class nxopen.uf.UFRoute.AskObjectPortData
-
- askObjectPreferences(Tag) - Method in interface nxopen.uf.UFDrf
-
- AskObjectPreferencesData() - Constructor for class nxopen.uf.UFDrf.AskObjectPreferencesData
-
- askObjects(Tag) - Method in interface nxopen.uf.UFPlist
-
- askObjectsControlledByExp(Tag) - Method in interface nxopen.uf.UFDrf
-
- AskObjectsControlledByExpData() - Constructor for class nxopen.uf.UFDrf.AskObjectsControlledByExpData
-
- AskObjectsData() - Constructor for class nxopen.uf.UFPlist.AskObjectsData
-
- askObjectStock(Tag) - Method in interface nxopen.uf.UFRoute
-
- askObjectType(Tag) - Method in interface nxopen.uf.UFUgmgr
-
- askObjList(Tag, int) - Method in interface nxopen.uf.UFClear
-
- AskObjListData() - Constructor for class nxopen.uf.UFClear.AskObjListData
-
- askObjSuppressPreZeros(Tag) - Method in interface nxopen.uf.UFDrf
-
- askObjTextAboveLdr(Tag) - Method in interface nxopen.uf.UFDrf
-
- askOccsOfEntity(Tag) - Method in interface nxopen.uf.UFAssem
-
- AskOccsOfEntityData() - Constructor for class nxopen.uf.UFAssem.AskOccsOfEntityData
-
- AskOccsOfEntityReturn - Variable in class nxopen.uf.UFAssem.AskOccsOfEntityData
-
- askOccsOfPart(Tag, Tag) - Method in interface nxopen.uf.UFAssem
-
- AskOccsOfPartData() - Constructor for class nxopen.uf.UFAssem.AskOccsOfPartData
-
- AskOccsOfPartReturn - Variable in class nxopen.uf.UFAssem.AskOccsOfPartData
-
- askOcfData(Tag) - Method in interface nxopen.uf.UFCurve
-
- askOffsetCurveCvtr(Tag) - Method in interface nxopen.uf.UFSo
-
- askOffsetCurves(Tag) - Method in interface nxopen.uf.UFCurve
-
- AskOffsetCurvesData() - Constructor for class nxopen.uf.UFCurve.AskOffsetCurvesData
-
- askOffsetDirection(UFModl.StringList) - Method in interface nxopen.uf.UFCurve
-
- askOffsetDirection2(UFModl.StringList) - Method in interface nxopen.uf.UFCurve
-
- AskOffsetDirection2Data() - Constructor for class nxopen.uf.UFCurve.AskOffsetDirection2Data
-
- AskOffsetDirectionData() - Constructor for class nxopen.uf.UFCurve.AskOffsetDirectionData
-
- askOffsetMidsrfThickness(Tag) - Method in interface nxopen.uf.UFSf
-
- askOffsetOfOffset(Tag) - Method in interface nxopen.uf.UFSo
-
- askOffsetParms(Tag, int) - Method in interface nxopen.uf.UFModeling
-
- askOffsetRegion(Tag) - Method in interface nxopen.uf.UFModlFeatures
-
- AskOffsetRegionData() - Constructor for class nxopen.uf.UFModlFeatures.AskOffsetRegionData
-
- askOffsetSurfCvtr(Tag) - Method in interface nxopen.uf.UFSo
-
- askOpenPartFilename(String, boolean[]) - Method in interface nxopen.uf.UFUi
-
- AskOpenPartFilenameData() - Constructor for class nxopen.uf.UFUi.AskOpenPartFilenameData
-
- askOper(UFVariant) - Method in interface nxopen.uf.UFDpud
-
- askOper(UFVariant) - Method in interface nxopen.uf.UFOper
-
- askOper(UFVariant) - Method in interface nxopen.uf.UFUdop
-
- askOperationClass() - Method in interface nxopen.uf.UFClone
-
- askOperType(Tag) - Method in interface nxopen.uf.UFOper
-
- askOptTemplateObject() - Method in interface nxopen.uf.UFCam
-
- askOrdoriginInfo(Tag) - Method in interface nxopen.uf.UFDrf
-
- AskOrdoriginInfoData() - Constructor for class nxopen.uf.UFDrf.AskOrdoriginInfoData
-
- askOrientation(Tag) - Method in interface nxopen.uf.UFAssem
-
- AskOrientationData() - Constructor for class nxopen.uf.UFAssem.AskOrientationData
-
- askOrigin(Tag) - Method in interface nxopen.uf.UFDrf
-
- askOutOfDateFeatures() - Method in interface nxopen.uf.UFModeling
-
- AskOutOfDateFeaturesData() - Constructor for class nxopen.uf.UFModeling.AskOutOfDateFeaturesData
-
- askOutOfDateObjects(Tag) - Method in interface nxopen.uf.UFWave
-
- AskOutOfDateObjectsData() - Constructor for class nxopen.uf.UFWave.AskOutOfDateObjectsData
-
- askOutOfDateParts() - Method in interface nxopen.uf.UFWave
-
- AskOutOfDatePartsData() - Constructor for class nxopen.uf.UFWave.AskOutOfDatePartsData
-
- askOverlappingBCs(SimBC[]) - Method in interface nxopen.cae.BCSelectionDisplayBuilder
-
Returns those BCs which have defined geometries overlapping within the input BCs list
License requirements: None.
- askOverriddenStatus(UFVariant) - Method in interface nxopen.uf.UFMfm
-
- askOwner(String) - Method in interface nxopen.uf.UFClone
-
- askOwningFeatOfExp(Tag) - Method in interface nxopen.uf.UFModlGeneral
-
- askOwningPart(Tag) - Method in interface nxopen.uf.UFObj
-
- askPairClearZone(Tag, Tag, Tag) - Method in interface nxopen.uf.UFClear
-
- AskPairClearZoneData() - Constructor for class nxopen.uf.UFClear.AskPairClearZoneData
-
- askParabola(UFVariant) - Method in interface nxopen.uf.UFEval
-
- askParaDist(Tag, Tag, int) - Method in interface nxopen.uf.UFModeling
-
- AskParaDistData() - Constructor for class nxopen.uf.UFModeling.AskParaDistData
-
- askParaEdge(Tag, Tag, int) - Method in interface nxopen.uf.UFModeling
-
- AskParaEdgeData() - Constructor for class nxopen.uf.UFModeling.AskParaEdgeData
-
- askParamAttributes(int) - Method in interface nxopen.uf.UFParam
-
- askParamDefiner(Tag, int) - Method in interface nxopen.uf.UFParam
-
- askParameterFormula(String, String) - Method in interface nxopen.uf.UFKf
-
- askParameterization(Tag) - Method in interface nxopen.uf.UFCurve
-
- AskParameterizationData() - Constructor for class nxopen.uf.UFCurve.AskParameterizationData
-
- askParameters(String) - Method in interface nxopen.uf.UFKf
-
- AskParametersData() - Constructor for class nxopen.uf.UFKf.AskParametersData
-
- askParameterType(String, String) - Method in interface nxopen.uf.UFKf
-
- askParams(Tag) - Method in interface nxopen.uf.UFPatt
-
- askParams(UFVariant) - Method in interface nxopen.uf.UFUde
-
- AskParamsData() - Constructor for class nxopen.uf.UFPatt.AskParamsData
-
- AskParamsData() - Constructor for class nxopen.uf.UFUde.AskParamsData
-
- askParamsOfFacet(Tag, int) - Method in interface nxopen.uf.UFFacet
-
- AskParamsOfFacetData() - Constructor for class nxopen.uf.UFFacet.AskParamsOfFacetData
-
- askParamStatus(Tag, int) - Method in interface nxopen.uf.UFParam
-
- askParamToggle(UFVariant, String) - Method in interface nxopen.uf.UFUde
-
- askParamType(UFVariant, String) - Method in interface nxopen.uf.UFUde
-
- askParentComponent(Tag) - Method in interface nxopen.uf.UFAssem
-
- askParentFeature(Tag) - Method in interface nxopen.uf.UFProcessAid
-
- askParentOfInheritedPmi(Tag) - Method in interface nxopen.uf.UFDrf
-
- askParentOfInstance(Tag) - Method in interface nxopen.uf.UFAssem
-
- askParents(Tag, int) - Method in interface nxopen.uf.UFSo
-
- AskParentsData() - Constructor for class nxopen.uf.UFSo.AskParentsData
-
- askParentStatus(Tag) - Method in interface nxopen.uf.UFSo
-
- askParms(Tag) - Method in interface nxopen.uf.UFSubdiv
-
- AskParmsData() - Constructor for class nxopen.uf.UFSubdiv.AskParmsData
-
- askPartAttribute() - Method in interface nxopen.uf.UFAttr
-
- askPartCset(Tag) - Method in interface nxopen.uf.UFWeight
-
- askPartHistory(Tag, UFVariant) - Method in interface nxopen.uf.UFPart
-
- askPartHistoryWithRenameInfo(Tag, UFVariant) - Method in interface nxopen.uf.UFPart
-
- askPartiallyShaded(Tag) - Method in interface nxopen.uf.UFObj
-
- askPartMaxWeight(Tag, UFWeight.UnitsType) - Method in interface nxopen.uf.UFWeight
-
- AskPartMaxWeightData() - Constructor for class nxopen.uf.UFWeight.AskPartMaxWeightData
-
- askPartMinWeight(Tag, UFWeight.UnitsType) - Method in interface nxopen.uf.UFWeight
-
- AskPartMinWeightData() - Constructor for class nxopen.uf.UFWeight.AskPartMinWeightData
-
- askPartName(Tag) - Method in interface nxopen.uf.UFPart
-
- askPartNameDesc(Tag) - Method in interface nxopen.uf.UFUgmgr
-
- AskPartNameDescData() - Constructor for class nxopen.uf.UFUgmgr.AskPartNameDescData
-
- askPartNameOfChild(Tag) - Method in interface nxopen.uf.UFAssem
-
- askPartNumber(Tag) - Method in interface nxopen.uf.UFUgmgr
-
- askPartNumRcps(Tag) - Method in interface nxopen.uf.UFRoute
-
- askPartNumSegs(Tag) - Method in interface nxopen.uf.UFRoute
-
- askPartOccChildren(Tag) - Method in interface nxopen.uf.UFAssem
-
- AskPartOccChildrenData() - Constructor for class nxopen.uf.UFAssem.AskPartOccChildrenData
-
- AskPartOccChildrenReturn - Variable in class nxopen.uf.UFAssem.AskPartOccChildrenData
-
- askPartOccOfInst(Tag, Tag) - Method in interface nxopen.uf.UFAssem
-
- askPartOccPorts(Tag) - Method in interface nxopen.uf.UFRoute
-
- AskPartOccPortsData() - Constructor for class nxopen.uf.UFRoute.AskPartOccPortsData
-
- askPartOccsOfInst(Tag) - Method in interface nxopen.uf.UFAssem
-
- AskPartOccsOfInstData() - Constructor for class nxopen.uf.UFAssem.AskPartOccsOfInstData
-
- AskPartOccsOfInstReturn - Variable in class nxopen.uf.UFAssem.AskPartOccsOfInstData
-
- askPartOccSuppressState(Tag) - Method in interface nxopen.uf.UFAssem
-
- AskPartOccSuppressStateData() - Constructor for class nxopen.uf.UFAssem.AskPartOccSuppressStateData
-
- askPartOccurrence(Tag) - Method in interface nxopen.uf.UFAssem
-
- askPartOccurrenceOfStep(Tag) - Method in interface nxopen.uf.UFAssem
-
- AskPartOccurrenceOfStepData() - Constructor for class nxopen.uf.UFAssem.AskPartOccurrenceOfStepData
-
- askPartPartType(Tag) - Method in interface nxopen.uf.UFRoute
-
- askPartRcps(Tag) - Method in interface nxopen.uf.UFRoute
-
- AskPartRcpsData() - Constructor for class nxopen.uf.UFRoute.AskPartRcpsData
-
- askPartRefSet(Tag) - Method in interface nxopen.uf.UFWeight
-
- askPartRevisionId(Tag) - Method in interface nxopen.uf.UFUgmgr
-
- askPartrevPartTag(Tag) - Method in interface nxopen.uf.UFUgmgr
-
- askPartSaveOption(Tag) - Method in interface nxopen.uf.UFWeight
-
- askPartSearchPath() - Method in interface nxopen.uf.UFRoute
-
- askPartSegs(Tag) - Method in interface nxopen.uf.UFRoute
-
- AskPartSegsData() - Constructor for class nxopen.uf.UFRoute.AskPartSegsData
-
- askPartState(String) - Method in interface nxopen.uf.UFClone
-
- askPartTag(String) - Method in interface nxopen.uf.UFPart
-
- askPartTag(String) - Method in interface nxopen.uf.UFUgmgr
-
- askPatchBodyParms(Tag) - Method in interface nxopen.uf.UFModeling
-
- AskPatchBodyParmsData() - Constructor for class nxopen.uf.UFModeling.AskPatchBodyParmsData
-
- askPath(UFVariant) - Method in interface nxopen.uf.UFOper
-
- askPathExists() - Method in interface nxopen.cam.CAMObject
-
Tells if the object has a path
License requirements: cam_base ("CAM BASE")
.
- askPdmDesc(String) - Method in interface nxopen.uf.UFClone
-
- askPdmName(String) - Method in interface nxopen.uf.UFClone
-
- askPerpDist(Tag, Tag, int) - Method in interface nxopen.uf.UFModeling
-
- AskPerpDistData() - Constructor for class nxopen.uf.UFModeling.AskPerpDistData
-
- askPerpendicular(double[]) - Method in interface nxopen.uf.UFVec2
-
- askPerpendicular(double[]) - Method in interface nxopen.uf.UFVec3
-
- askPerspective(Tag) - Method in interface nxopen.uf.UFView
-
- AskPerspectiveData() - Constructor for class nxopen.uf.UFView.AskPerspectiveData
-
- askPictorialSxline(Tag) - Method in interface nxopen.uf.UFDraw
-
- AskPictorialSxlineData() - Constructor for class nxopen.uf.UFDraw.AskPictorialSxlineData
-
- askPipNodeData(Tag) - Method in interface nxopen.uf.UFSmd
-
- askPitchDiaFeatureOfSplineGear(Tag) - Method in interface nxopen.uf.UFGdt
-
- askPlacesTransform(UFVariant) - Method in interface nxopen.uf.UFRoute
-
- AskPlacesTransformData() - Constructor for class nxopen.uf.UFRoute.AskPlacesTransformData
-
- askPlane(Tag) - Method in interface nxopen.uf.UFModeling
-
- AskPlaneData() - Constructor for class nxopen.uf.UFModeling.AskPlaneData
-
- askPlaneEquation(Tag, int) - Method in interface nxopen.uf.UFFacet
-
- AskPlaneEquationData() - Constructor for class nxopen.uf.UFFacet.AskPlaneEquationData
-
- askPlaneOfMirrorSet(Tag) - Method in interface nxopen.uf.UFModeling
-
- askPlaneZone(Tag) - Method in interface nxopen.uf.UFFltr
-
- AskPlaneZoneData() - Constructor for class nxopen.uf.UFFltr.AskPlaneZoneData
-
- askPlatesSpatialRelations(TaggedObject, TaggedObject[], double) - Method in interface nxopen.shipdesign.Generator
-
Gets the spatial relations of the plates based on its positions.
- AskPlatesSpatialRelationsData() - Constructor for class nxopen.shipdesign.Generator.AskPlatesSpatialRelationsData
-
- askPlotDrawingImages() - Method in interface nxopen.uf.UFDrf
-
- askPlotLayoutExtents(UFPlot.Units) - Method in interface nxopen.uf.UFPlot
-
- askPoint(UFVariant) - Method in interface nxopen.uf.UFKf
-
- askPoint(UFVariant, String) - Method in interface nxopen.uf.UFUde
-
- askPointAlongCurve(double[], Tag, double, int, double) - Method in interface nxopen.uf.UFModlGeneral
-
- askPointAlongCurve2(double[], Tag, double, int, double) - Method in interface nxopen.uf.UFModlGeneral
-
- AskPointAlongCurve2Data() - Constructor for class nxopen.uf.UFModlGeneral.AskPointAlongCurve2Data
-
- askPointContainment(double[], Tag) - Method in interface nxopen.uf.UFModeling
-
- askPointData(Tag) - Method in interface nxopen.uf.UFCurve
-
- askPointOfAxis(Tag) - Method in interface nxopen.uf.UFSo
-
- askPointOfXform(Tag) - Method in interface nxopen.uf.UFSo
-
- askPointOnSurfaceConstraint(Tag) - Method in interface nxopen.uf.UFMotion
-
- askPointOutput(Tag) - Method in interface nxopen.uf.UFPoint
-
- askPointsParms(Tag) - Method in interface nxopen.uf.UFModeling
-
- AskPointsParmsData() - Constructor for class nxopen.uf.UFModeling.AskPointsParmsData
-
- askPortAlignFlag(Tag) - Method in interface nxopen.uf.UFRoute
-
- askPortAlignVector(Tag) - Method in interface nxopen.uf.UFRoute
-
- askPortBackExtension(Tag) - Method in interface nxopen.uf.UFRoute
-
- askPortBackExtensionObj(Tag) - Method in interface nxopen.uf.UFRoute
-
- askPortClockIncrement(Tag) - Method in interface nxopen.uf.UFRoute
-
- askPortConnectedPort(Tag) - Method in interface nxopen.uf.UFRoute
-
- AskPortConnectedPortData() - Constructor for class nxopen.uf.UFRoute.AskPortConnectedPortData
-
- askPortConnection(Tag) - Method in interface nxopen.uf.UFRoute
-
- askPortConnPort(Tag) - Method in interface nxopen.uf.UFRoute
-
- AskPortConnPortData() - Constructor for class nxopen.uf.UFRoute.AskPortConnPortData
-
- AskPortConnPortReturn - Variable in class nxopen.uf.UFRoute.AskPortConnPortData
-
- askPortCutBackLength(Tag) - Method in interface nxopen.uf.UFRoute
-
- askPortEngagedPos(Tag) - Method in interface nxopen.uf.UFRoute
-
- askPortEngagement(Tag) - Method in interface nxopen.uf.UFRoute
-
- askPortEngageObj(Tag) - Method in interface nxopen.uf.UFRoute
-
- askPortExtension(Tag) - Method in interface nxopen.uf.UFRoute
-
- askPortExtensionObj(Tag) - Method in interface nxopen.uf.UFRoute
-
- askPortLockInfo(Tag) - Method in interface nxopen.uf.UFRoute
-
- AskPortLockInfoData() - Constructor for class nxopen.uf.UFRoute.AskPortLockInfoData
-
- askPortMultiport(Tag) - Method in interface nxopen.uf.UFRoute
-
- askPortOccOfPort(Tag) - Method in interface nxopen.uf.UFRoute
-
- askPortOnSegment(Tag, int) - Method in interface nxopen.uf.UFRoute
-
- askPortPartOcc(Tag) - Method in interface nxopen.uf.UFRoute
-
- askPortPosition(Tag) - Method in interface nxopen.uf.UFRoute
-
- askPortRotateFlag(Tag) - Method in interface nxopen.uf.UFRoute
-
- askPortRotateVector(Tag) - Method in interface nxopen.uf.UFRoute
-
- askPortSegment(Tag) - Method in interface nxopen.uf.UFRoute
-
- askPortStock(Tag) - Method in interface nxopen.uf.UFRoute
-
- askPortTerminalPorts(Tag) - Method in interface nxopen.uf.UFRoute
-
- AskPortTerminalPortsData() - Constructor for class nxopen.uf.UFRoute.AskPortTerminalPortsData
-
- askPosition(UFVariant) - Method in interface nxopen.uf.UFDrpos
-
- askPostTemplateName() - Method in interface nxopen.uf.UFCam
-
- askPreferences(Tag) - Method in interface nxopen.uf.UFClear
-
- askPreferences() - Method in interface nxopen.uf.UFDrf
-
- askPreferences(Tag) - Method in interface nxopen.uf.UFSket
-
- AskPreferencesData() - Constructor for class nxopen.uf.UFDrf.AskPreferencesData
-
- AskPreferencesData() - Constructor for class nxopen.uf.UFSket.AskPreferencesData
-
- askPrefs(Tag) - Method in interface nxopen.uf.UFPlist
-
- askPrevDir(Tag) - Method in interface nxopen.uf.UFDirpath
-
- askPreviousFeature(Tag) - Method in interface nxopen.uf.UFModlGeneral
-
- askPrinterGroups() - Method in interface nxopen.uf.UFPlot
-
- AskPrinterGroupsData() - Constructor for class nxopen.uf.UFPlot.AskPrinterGroupsData
-
- askPrinterNames() - Method in interface nxopen.uf.UFPlot
-
- AskPrinterNamesData() - Constructor for class nxopen.uf.UFPlot.AskPrinterNamesData
-
- askPrismParms(Tag, int) - Method in interface nxopen.uf.UFModlGeneral
-
- AskPrismParmsData() - Constructor for class nxopen.uf.UFModlGeneral.AskPrismParmsData
-
- askProductAssemblies() - Method in interface nxopen.uf.UFUgmgr
-
- AskProductAssembliesData() - Constructor for class nxopen.uf.UFUgmgr.AskProductAssembliesData
-
- askProductAttribueData(Tag) - Method in interface nxopen.uf.UFPd
-
- askProductAttribueData2(Tag) - Method in interface nxopen.uf.UFPd
-
- askProductAttribues(Tag) - Method in interface nxopen.uf.UFPd
-
- AskProductAttribuesData() - Constructor for class nxopen.uf.UFPd.AskProductAttribuesData
-
- askProductAttribueValueData(Tag) - Method in interface nxopen.uf.UFPd
-
- askProductAttributeData(Tag) - Method in interface nxopen.uf.UFPd
-
- askProductAttributeData2(Tag) - Method in interface nxopen.uf.UFPd
-
- askProductAttributes(Tag) - Method in interface nxopen.uf.UFGdt
-
- askProductAttributes(Tag) - Method in interface nxopen.uf.UFPd
-
- AskProductAttributesData() - Constructor for class nxopen.uf.UFGdt.AskProductAttributesData
-
- AskProductAttributesData() - Constructor for class nxopen.uf.UFPd.AskProductAttributesData
-
- askProductAttributeValueData(Tag) - Method in interface nxopen.uf.UFPd
-
- askProductDefinitionData(Tag) - Method in interface nxopen.uf.UFPd
-
- askProductDefinitionFromInstance(Tag) - Method in interface nxopen.uf.UFPd
-
- askProductDefinitions(Tag) - Method in interface nxopen.uf.UFPd
-
- AskProductDefinitionsData() - Constructor for class nxopen.uf.UFPd.AskProductDefinitionsData
-
- askProductDefinitionsInstances(Tag) - Method in interface nxopen.uf.UFPd
-
- AskProductDefinitionsInstancesData() - Constructor for class nxopen.uf.UFPd.AskProductDefinitionsInstancesData
-
- askProductDefinitionsOfGeometry(Tag[], int) - Method in interface nxopen.uf.UFPd
-
- AskProductDefinitionsOfGeometryData() - Constructor for class nxopen.uf.UFPd.AskProductDefinitionsOfGeometryData
-
- askProfileNames(String) - Method in interface nxopen.uf.UFPlot
-
- AskProfileNamesData() - Constructor for class nxopen.uf.UFPlot.AskProfileNamesData
-
- askProfileTolData(Tag) - Method in interface nxopen.uf.UFGdt
-
- AskProfileTolData() - Constructor for class nxopen.uf.UFGdt.AskProfileTolData
-
- askProgramGroup(Tag) - Method in interface nxopen.uf.UFOper
-
- askProgramNull(Tag) - Method in interface nxopen.uf.UFSetup
-
- askProgramRoot(Tag) - Method in interface nxopen.uf.UFSetup
-
- askProjCurveParents(Tag) - Method in interface nxopen.uf.UFCurve
-
- AskProjCurveParentsData() - Constructor for class nxopen.uf.UFCurve.AskProjCurveParentsData
-
- askProjCurves(Tag) - Method in interface nxopen.uf.UFCurve
-
- askProjCurves(Tag) - Method in interface nxopen.uf.UFModlGeneral
-
- AskProjCurvesData() - Constructor for class nxopen.uf.UFCurve.AskProjCurvesData
-
- askProjOption(UFVariant) - Method in interface nxopen.uf.UFDpud
-
- askProjVec(UFVariant) - Method in interface nxopen.uf.UFDpud
-
- askProjVec(UFVariant) - Method in interface nxopen.uf.UFDrpos
-
- askPromFeatOfSolid(Tag) - Method in interface nxopen.uf.UFModlGeneral
-
- askPromotionPath(Tag, boolean) - Method in interface nxopen.uf.UFModlGeneral
-
- AskPromotionPathData() - Constructor for class nxopen.uf.UFModlGeneral.AskPromotionPathData
-
- askProperLegacyFeatName(Tag) - Method in interface nxopen.uf.UFModeling
-
- askProps(Tag, UFWeight.UnitsType) - Method in interface nxopen.uf.UFWeight
-
- askPrototypeOfOcc(Tag) - Method in interface nxopen.uf.UFAssem
-
- askPsTagOfObject(Tag) - Method in interface nxopen.uf.UFPs
-
- askPtCrvConstraint(Tag) - Method in interface nxopen.uf.UFMotion
-
- askPulledToleranceComponent(Tag) - Method in interface nxopen.uf.UFGdt
-
- askPurpose(UFVariant) - Method in interface nxopen.uf.UFDpud
-
- askPurpose(UFVariant) - Method in interface nxopen.uf.UFUdop
-
- askQuiltType(Tag) - Method in interface nxopen.uf.UFModlFeatures
-
- askR1ToolTipJunction() - Method in interface nxopen.cam.ManageToolPartBuilder
-
The r1 tool tip junction, applies for turning tools only
License requirements: None.
- AskR1ToolTipJunctionData() - Constructor for class nxopen.cam.ManageToolPartBuilder.AskR1ToolTipJunctionData
-
- askRatio(UFVariant) - Method in interface nxopen.uf.UFDpud
-
- askRcpAtTermPort(Tag) - Method in interface nxopen.uf.UFRoute
-
- AskRcpAtTermPortData() - Constructor for class nxopen.uf.UFRoute.AskRcpAtTermPortData
-
- askRcpCorner(Tag) - Method in interface nxopen.uf.UFRoute
-
- askRcpOnPort(Tag) - Method in interface nxopen.uf.UFRoute
-
- askRcpPorts(Tag) - Method in interface nxopen.uf.UFRoute
-
- AskRcpPortsData() - Constructor for class nxopen.uf.UFRoute.AskRcpPortsData
-
- askRcpPosition(Tag) - Method in interface nxopen.uf.UFRoute
-
- askRcpSegments(Tag) - Method in interface nxopen.uf.UFRoute
-
- AskRcpSegmentsData() - Constructor for class nxopen.uf.UFRoute.AskRcpSegmentsData
-
- askRcpSegs(Tag) - Method in interface nxopen.uf.UFRoute
-
- AskRcpSegsData() - Constructor for class nxopen.uf.UFRoute.AskRcpSegsData
-
- askReblendFace(Tag) - Method in interface nxopen.uf.UFModlFeatures
-
- askRecordInRset(UFVariant, int) - Method in interface nxopen.uf.UFLib
-
- AskRecordInRsetData() - Constructor for class nxopen.uf.UFLib.AskRecordInRsetData
-
- askRectangularPatternFace(Tag) - Method in interface nxopen.uf.UFModlFeatures
-
- AskRectangularPatternFaceData() - Constructor for class nxopen.uf.UFModlFeatures.AskRectangularPatternFaceData
-
- askRectGrooveParms(Tag, int) - Method in interface nxopen.uf.UFModlFeatures
-
- AskRectGrooveParmsData() - Constructor for class nxopen.uf.UFModlFeatures.AskRectGrooveParmsData
-
- askRectPadParms(Tag, int) - Method in interface nxopen.uf.UFModlFeatures
-
- askRectPadParms1(Tag, int) - Method in interface nxopen.uf.UFModlFeatures
-
- AskRectPadParms1Data() - Constructor for class nxopen.uf.UFModlFeatures.AskRectPadParms1Data
-
- AskRectPadParmsData() - Constructor for class nxopen.uf.UFModlFeatures.AskRectPadParmsData
-
- askRectPocketParms(Tag, int) - Method in interface nxopen.uf.UFModlFeatures
-
- AskRectPocketParmsData() - Constructor for class nxopen.uf.UFModlFeatures.AskRectPocketParmsData
-
- askRectSlotParms(Tag, int) - Method in interface nxopen.uf.UFModl
-
- AskRectSlotParmsData() - Constructor for class nxopen.uf.UFModl.AskRectSlotParmsData
-
- askRefCutter(Tag) - Method in interface nxopen.uf.UFOper
-
- askReferenceFolder(PenetrationRequest, PenetrationUtils.Referencetype) - Method in interface nxopen.features.shipdesign.PenetrationUtils
-
Get the reference folder
PenetrationFolder
License requirements: nx_penetration_mgmt ("Penetration Management")
Created in NX8.0.0
- askReferencesOfFeatures(Tag[], int) - Method in interface nxopen.uf.UFModeling
-
- AskReferencesOfFeaturesData() - Constructor for class nxopen.uf.UFModeling.AskReferencesOfFeaturesData
-
- askReferenceStatus(Tag, Tag) - Method in interface nxopen.uf.UFSket
-
- askRefitFaceFeatureData(Tag) - Method in interface nxopen.uf.UFModlFeatures
-
- askRefSetData(Tag) - Method in interface nxopen.uf.UFAssem
-
- AskRefSetData() - Constructor for class nxopen.uf.UFAssem.AskRefSetData
-
- askRefSetMembers(Tag) - Method in interface nxopen.uf.UFAssem
-
- AskRefSetMembersData() - Constructor for class nxopen.uf.UFAssem.AskRefSetMembersData
-
- askRefSets(Tag) - Method in interface nxopen.uf.UFAssem
-
- AskRefSetsData() - Constructor for class nxopen.uf.UFAssem.AskRefSetsData
-
- askRelativeColumn(Tag, int) - Method in interface nxopen.uf.UFTabnot
-
- askRelativeRow(Tag, int) - Method in interface nxopen.uf.UFTabnot
-
- askRenderSetObjects(Tag) - Method in interface nxopen.uf.UFDraw
-
- AskRenderSetObjectsData() - Constructor for class nxopen.uf.UFDraw.AskRenderSetObjectsData
-
- askRenderSetParms(Tag) - Method in interface nxopen.uf.UFDraw
-
- askRenderSets() - Method in interface nxopen.uf.UFDraw
-
- AskRenderSetsData() - Constructor for class nxopen.uf.UFDraw.AskRenderSetsData
-
- askRenderSetsOfView(Tag) - Method in interface nxopen.uf.UFDraw
-
- AskRenderSetsOfViewData() - Constructor for class nxopen.uf.UFDraw.AskRenderSetsOfViewData
-
- askReplaceFace(Tag) - Method in interface nxopen.uf.UFModlFeatures
-
- AskReplaceFaceData() - Constructor for class nxopen.uf.UFModlFeatures.AskReplaceFaceData
-
- askRepresentativeFeatures(Tag) - Method in interface nxopen.uf.UFFbmGeom
-
- AskRepresentativeFeaturesData() - Constructor for class nxopen.uf.UFFbmGeom.AskRepresentativeFeaturesData
-
- askRequestLists() - Method in interface nxopen.features.shipdesign.PenetrationUtils
-
Ask current
PenetrationList
License requirements: nx_penetration_mgmt ("Penetration Management")
Created in NX8.0.0
- askRequestsOfPenetratedPart(Part) - Method in interface nxopen.features.shipdesign.PenetrationUtils
-
Ask requests of penetrated parts
License requirements: nx_penetration_mgmt ("Penetration Management")
.
- askRequestsOfPenetratingPart(Part) - Method in interface nxopen.features.shipdesign.PenetrationUtils
-
Ask requests of penetratint parts
License requirements: nx_penetration_mgmt ("Penetration Management")
.
- askRequiredParams(Tag) - Method in interface nxopen.uf.UFParam
-
- AskRequiredParamsData() - Constructor for class nxopen.uf.UFParam.AskRequiredParamsData
-
- askResizeFace(Tag) - Method in interface nxopen.uf.UFModlFeatures
-
- AskResizeFaceData() - Constructor for class nxopen.uf.UFModlFeatures.AskResizeFaceData
-
- askResultAtLocation(Point3d) - Method in interface nxopen.cae.ResultAccess
-
Ask current component value at a specified location.
- askResultAtLocationAllComponents(Point3d) - Method in interface nxopen.cae.ResultAccess
-
Ask all component values at a specified position.
- askResultComponents() - Method in interface nxopen.cae.ResultAccess
-
Return all results components for the current result state defined by
ResultParameters
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
Created in NX6.0.2
- AskResultComponentsData() - Constructor for class nxopen.cae.ResultAccess.AskResultComponentsData
-
- askResultDataType(int, int, Result.Type) - Method in interface nxopen.cae.Result
-
Ask result datatype
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- askResultLoadcaseValue(int) - Method in interface nxopen.cae.Result
-
Ask load case description, value type and value for the input load case
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- AskResultLoadcaseValueData() - Constructor for class nxopen.cae.Result.AskResultLoadcaseValueData
-
- askResultLocation() - Method in interface nxopen.cae.ResultAccess
-
Ask result location current result state.
- askResults(Tag) - Method in interface nxopen.uf.UFClear
-
- askResultSections(int, int, Result.Type) - Method in interface nxopen.cae.Result
-
Ask element ids and corresponding number of sections at which result is defined
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- askResultTypes(int, int) - Method in interface nxopen.cae.Result
-
Returns an array of result types and descriptions available for a given loadcase and iteration
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- AskResultTypesData() - Constructor for class nxopen.cae.Result.AskResultTypesData
-
- askRetainColorFontWidth() - Method in interface nxopen.uf.UFDrf
-
- AskRetainColorFontWidthData() - Constructor for class nxopen.uf.UFDrf.AskRetainColorFontWidthData
-
- askRetainedState() - Method in interface nxopen.uf.UFDrf
-
- askRevolution(Tag) - Method in interface nxopen.uf.UFModl
-
- AskRevolutionData() - Constructor for class nxopen.uf.UFModl.AskRevolutionData
-
- askRevolvedSxline(Tag) - Method in interface nxopen.uf.UFDraw
-
- AskRevolvedSxlineData() - Constructor for class nxopen.uf.UFDraw.AskRevolvedSxlineData
-
- askRevUp(boolean[]) - Method in interface nxopen.uf.UFClone
-
- askRibbonVis(UFVariant) - Method in interface nxopen.uf.UFUi
-
- askRigidData(FEElement) - Method in interface nxopen.cae.ElementAssociatedDataUtils
-
Returns rigid element associated data.
- AskRigidData() - Constructor for class nxopen.cae.ElementAssociatedDataUtils.AskRigidData
-
- askRipedge(Tag) - Method in interface nxopen.uf.UFModlSmd
-
- askRootFolder() - Method in interface nxopen.uf.UFUgmgr
-
- askRootOfObject(Tag) - Method in interface nxopen.uf.UFNcgroup
-
- askRootPartOcc(Tag) - Method in interface nxopen.uf.UFAssem
-
- askRotation(double[]) - Method in interface nxopen.uf.UFMtx4
-
- askRotation(Tag) - Method in interface nxopen.uf.UFView
-
- askRotDisplacementResults(Tag, UFMotion.DispAngle, UFMotion.ReferenceFrame) - Method in interface nxopen.uf.UFMotion
-
- AskRotDisplacementResultsData() - Constructor for class nxopen.uf.UFMotion.AskRotDisplacementResultsData
-
- askRoughOffset(Tag) - Method in interface nxopen.uf.UFModlFeatures
-
- askRouteEnd(Tag) - Method in interface nxopen.uf.UFRoute
-
- askRouteObjs(Tag) - Method in interface nxopen.uf.UFRoute
-
- AskRouteObjsData() - Constructor for class nxopen.uf.UFRoute.AskRouteObjsData
-
- askRouteStart(Tag) - Method in interface nxopen.uf.UFRoute
-
- askRowColumnCount(Tag) - Method in interface nxopen.uf.UFScop
-
- AskRowColumnCountData() - Constructor for class nxopen.uf.UFScop.AskRowColumnCountData
-
- askRowHeadCfw(Tag) - Method in interface nxopen.uf.UFTabnot
-
- askRowHeight(Tag) - Method in interface nxopen.uf.UFTabnot
-
- askRowLock(Tag) - Method in interface nxopen.uf.UFPlist
-
- askRowOfCell(Tag) - Method in interface nxopen.uf.UFTabnot
-
- askRpoDescOfFeat(Tag) - Method in interface nxopen.uf.UFModlGeneral
-
- AskRpoDescOfFeatData() - Constructor for class nxopen.uf.UFModlGeneral.AskRpoDescOfFeatData
-
- askRpoDescOfFrec(Tag) - Method in interface nxopen.uf.UFModlGeneral
-
- AskRpoDescOfFrecData() - Constructor for class nxopen.uf.UFModlGeneral.AskRpoDescOfFrecData
-
- askRsetCount(UFVariant) - Method in interface nxopen.uf.UFLib
-
- askRsetMap(UFVariant) - Method in interface nxopen.uf.UFLib
-
- AskRsetMapData() - Constructor for class nxopen.uf.UFLib.AskRsetMapData
-
- askRuled(Tag) - Method in interface nxopen.uf.UFModlFeatures
-
- askRuled1(Tag) - Method in interface nxopen.uf.UFModlFeatures
-
- AskRuled1Data() - Constructor for class nxopen.uf.UFModlFeatures.AskRuled1Data
-
- AskRuledData() - Constructor for class nxopen.uf.UFModlFeatures.AskRuledData
-
- askRuleName(UFVariant) - Method in interface nxopen.uf.UFKf
-
- askRuleOfInstance(String, String) - Method in interface nxopen.uf.UFKf
-
- askRuleOfName(String, String) - Method in interface nxopen.uf.UFKf
-
- askRules(String) - Method in interface nxopen.uf.UFKf
-
- AskRulesData() - Constructor for class nxopen.uf.UFKf.AskRulesData
-
- askRulesOfClass(String) - Method in interface nxopen.uf.UFKf
-
- AskRulesOfClassData() - Constructor for class nxopen.uf.UFKf.AskRulesOfClassData
-
- askRuleTextOfReferencingObject(Tag) - Method in interface nxopen.uf.UFKf
-
- askRuleType(UFVariant) - Method in interface nxopen.uf.UFKf
-
- askRuleTypes() - Method in interface nxopen.uf.UFKf
-
- AskRuleTypesData() - Constructor for class nxopen.uf.UFKf.AskRuleTypesData
-
- askRunIdAndType(Tag) - Method in interface nxopen.uf.UFRouteRun
-
- AskRunIdAndTypeData() - Constructor for class nxopen.uf.UFRouteRun.AskRunIdAndTypeData
-
- askRunsInPart(Tag) - Method in interface nxopen.uf.UFRouteRun
-
- AskRunsInPartData() - Constructor for class nxopen.uf.UFRouteRun.AskRunsInPartData
-
- askSaveTrueshape() - Method in interface nxopen.uf.UFAssem
-
- askSbfFile() - Method in interface nxopen.uf.UFDrf
-
- askScalarForce(Tag) - Method in interface nxopen.uf.UFMotion
-
- askScalarTorque(Tag) - Method in interface nxopen.uf.UFMotion
-
- askScale(Tag) - Method in interface nxopen.uf.UFModeling
-
- askScale(double[]) - Method in interface nxopen.uf.UFMtx4
-
- AskScaleData() - Constructor for class nxopen.uf.UFModeling.AskScaleData
-
- askScaleOfXform(Tag) - Method in interface nxopen.uf.UFSo
-
- askSearchDirectories() - Method in interface nxopen.uf.UFAssem
-
- AskSearchDirectoriesData() - Constructor for class nxopen.uf.UFAssem.AskSearchDirectoriesData
-
- askSectionCount(Tag) - Method in interface nxopen.uf.UFCutter
-
- askSectionDescription(Result.Section) - Method in interface nxopen.cae.Result
-
Ask Section description provided section type
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- askSectionOfDatum(Tag) - Method in interface nxopen.uf.UFProcessAid
-
- AskSectionOfDatumData() - Constructor for class nxopen.uf.UFProcessAid.AskSectionOfDatumData
-
- askSectionOfRow(Tag) - Method in interface nxopen.uf.UFTabnot
-
- askSectionPlyLayer() - Method in interface nxopen.cae.ResultParameters
-
Ask section, ply and layer
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- AskSectionPlyLayerData() - Constructor for class nxopen.cae.ResultParameters.AskSectionPlyLayerData
-
- askSectionPrefs(Tag) - Method in interface nxopen.uf.UFTabnot
-
- askSegCurve(Tag) - Method in interface nxopen.uf.UFRoute
-
- askSegmentBendCrnr(Tag) - Method in interface nxopen.uf.UFRoute
-
- askSegmentBranchAngle(Tag) - Method in interface nxopen.uf.UFRoute
-
- askSegmentBundleStock(Tag, Tag) - Method in interface nxopen.uf.UFRoute
-
- askSegmentEndIdx(Tag, Tag) - Method in interface nxopen.uf.UFRoute
-
- askSegmentEndPnts(Tag) - Method in interface nxopen.uf.UFRoute
-
- AskSegmentEndPntsData() - Constructor for class nxopen.uf.UFRoute.AskSegmentEndPntsData
-
- askSegmentEndProps(Tag, int) - Method in interface nxopen.uf.UFRoute
-
- AskSegmentEndPropsData() - Constructor for class nxopen.uf.UFRoute.AskSegmentEndPropsData
-
- askSegmentIntPart(Tag) - Method in interface nxopen.uf.UFRoute
-
- askSegmentIntParts(Tag) - Method in interface nxopen.uf.UFRoute
-
- AskSegmentIntPartsData() - Constructor for class nxopen.uf.UFRoute.AskSegmentIntPartsData
-
- askSegmentLength(Tag) - Method in interface nxopen.uf.UFRoute
-
- askSegmentLenOfWelds(Tag) - Method in interface nxopen.uf.UFWeld
-
- askSegmentPaths(Tag) - Method in interface nxopen.uf.UFRoute
-
- AskSegmentPathsData() - Constructor for class nxopen.uf.UFRoute.AskSegmentPathsData
-
- askSegmentRoutes(Tag) - Method in interface nxopen.uf.UFRoute
-
- AskSegmentRoutesData() - Constructor for class nxopen.uf.UFRoute.AskSegmentRoutesData
-
- askSegmentsIsPath(int, Tag[], Tag) - Method in interface nxopen.uf.UFRoute
-
- askSegmentsPaths(int, Tag[]) - Method in interface nxopen.uf.UFRoute
-
- AskSegmentsPathsData() - Constructor for class nxopen.uf.UFRoute.AskSegmentsPathsData
-
- askSegmentStock(Tag) - Method in interface nxopen.uf.UFRoute
-
- AskSegmentStockData() - Constructor for class nxopen.uf.UFRoute.AskSegmentStockData
-
- askSegmentWires(Tag) - Method in interface nxopen.uf.UFRoute
-
- AskSegmentWiresData() - Constructor for class nxopen.uf.UFRoute.AskSegmentWiresData
-
- askSegRcps(Tag) - Method in interface nxopen.uf.UFRoute
-
- askSelCursorPos(UFVariant) - Method in interface nxopen.uf.UFUi
-
- AskSelCursorPosData() - Constructor for class nxopen.uf.UFUi.AskSelCursorPosData
-
- askSelDescriptor(UFVariant) - Method in interface nxopen.uf.UFUi
-
- askSelectDialogId(UFVariant) - Method in interface nxopen.uf.UFStyler
-
- askSelectedBCsList() - Method in interface nxopen.cae.BCSelectionDisplayBuilder
-
Ask all BCs in the Selected BCs List
License requirements: None.
- askSelectedFeaList() - Method in interface nxopen.uf.UFMfm
-
- AskSelectedFeaListData() - Constructor for class nxopen.uf.UFMfm.AskSelectedFeaListData
-
- askSelectedNodes() - Method in interface nxopen.uf.UFUiOnt
-
- AskSelectedNodesData() - Constructor for class nxopen.uf.UFUiOnt.AskSelectedNodesData
-
- askSelectedPointData(Tag, int) - Method in interface nxopen.uf.UFOper
-
- askSelectedTrackingPointCount(Tag) - Method in interface nxopen.uf.UFOper
-
- askSelectedTurnPointData(Tag, int) - Method in interface nxopen.uf.UFOper
-
- askSelectionCursorPosition(SelectionHandle) - Method in interface nxopen.Selection
-
Returns the view and absolute coordinates of the cursor position for the associated selection.
- AskSelectionCursorPositionData() - Constructor for class nxopen.Selection.AskSelectionCursorPositionData
-
- askSelectionDescriptor(SelectionHandle) - Method in interface nxopen.Selection
-
- askSelectionListCount(SelectionHandle) - Method in interface nxopen.Selection
-
Returns the number of objects currently selected.
- askSelectionObjectList(SelectionHandle) - Method in interface nxopen.Selection
-
- askSelectionRectanglePosition(SelectionHandle) - Method in interface nxopen.Selection
-
Returns the absolute coordinates of the rectangle cursor positions.
- AskSelectionRectanglePositionData() - Constructor for class nxopen.Selection.AskSelectionRectanglePositionData
-
- askSelectionTaggedObjectList(SelectionHandle) - Method in interface nxopen.Selection
-
Returns the number of tagged objects selected and a pointer to an array of
tags of the objects selected.
- askSelListCount(UFVariant) - Method in interface nxopen.uf.UFUi
-
- askSelObjectList(UFVariant) - Method in interface nxopen.uf.UFUi
-
- AskSelObjectListData() - Constructor for class nxopen.uf.UFUi.AskSelObjectListData
-
- askSelRectanglePos(UFVariant) - Method in interface nxopen.uf.UFUi
-
- AskSelRectanglePosData() - Constructor for class nxopen.uf.UFUi.AskSelRectanglePosData
-
- askSequenceDescription(Tag) - Method in interface nxopen.uf.UFAssem
-
- askSequenceDuration(Tag) - Method in interface nxopen.uf.UFAssem
-
- askSequenceName(Tag) - Method in interface nxopen.uf.UFAssem
-
- askSequencesInPart(Tag) - Method in interface nxopen.uf.UFAssem
-
- AskSequencesInPartData() - Constructor for class nxopen.uf.UFAssem.AskSequencesInPartData
-
- askSequenceType(Tag) - Method in interface nxopen.uf.UFAssem
-
- askSessionBannerOptions() - Method in interface nxopen.uf.UFPlot
-
- askSessionCustomColors() - Method in interface nxopen.uf.UFCgm
-
- askSessionCustomColors() - Method in interface nxopen.uf.UFPlot
-
- askSessionCustomWidths() - Method in interface nxopen.uf.UFCgm
-
- askSessionCustomWidths() - Method in interface nxopen.uf.UFPlot
-
- askSessionDelay() - Method in interface nxopen.uf.UFWave
-
- askSessionExportOptions() - Method in interface nxopen.uf.UFCgm
-
- askSessionJobOptions() - Method in interface nxopen.uf.UFPlot
-
- askSetFromName(String) - Method in interface nxopen.uf.UFModeling
-
- askSetOfDimension(Tag) - Method in interface nxopen.uf.UFDrf
-
- askSetsOfMember(Tag) - Method in interface nxopen.uf.UFModeling
-
- AskSetsOfMemberData() - Constructor for class nxopen.uf.UFModeling.AskSetsOfMemberData
-
- askSetup() - Method in interface nxopen.uf.UFSetup
-
- askSewSheetBody(Tag) - Method in interface nxopen.uf.UFModeling
-
- AskSewSheetBodyData() - Constructor for class nxopen.uf.UFModeling.AskSewSheetBodyData
-
- askSewSolidBody(Tag) - Method in interface nxopen.uf.UFModeling
-
- AskSewSolidBodyData() - Constructor for class nxopen.uf.UFModeling.AskSewSolidBodyData
-
- askShadedEdgeOptions(Tag) - Method in interface nxopen.uf.UFView
-
- askShape() - Method in interface nxopen.Traceline
-
Returns the object used to represent the shape of the traceline
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- askSharedEdges(Tag, Tag) - Method in interface nxopen.uf.UFModeling
-
- askShellData(FEElement, Point3d, Point3d, Point3d) - Method in interface nxopen.cae.ElementAssociatedDataUtils
-
Returns shell element associated data.
- AskShellData() - Constructor for class nxopen.cae.ElementAssociatedDataUtils.AskShellData
-
- askShowReportReference() - Method in interface nxopen.uf.UFModeling
-
- askSimEngine(UFVariant) - Method in interface nxopen.uf.UFSim
-
- askSimpleHoleParms(Tag, int) - Method in interface nxopen.uf.UFModlFeatures
-
- AskSimpleHoleParmsData() - Constructor for class nxopen.uf.UFModlFeatures.AskSimpleHoleParmsData
-
- askSimpleSxline(Tag) - Method in interface nxopen.uf.UFDraw
-
- AskSimpleSxlineData() - Constructor for class nxopen.uf.UFDraw.AskSimpleSxlineData
-
- askSimplifiedCurve(Tag, Tag) - Method in interface nxopen.uf.UFDraw
-
- AskSimplifiedCurveData() - Constructor for class nxopen.uf.UFDraw.AskSimplifiedCurveData
-
- askSimplifyParms(Tag) - Method in interface nxopen.uf.UFModlFeatures
-
- askSizeToleranceTag(Tag) - Method in interface nxopen.uf.UFGdt
-
- askSketchFeatures(Tag) - Method in interface nxopen.uf.UFSket
-
- askSketchInfo(Tag) - Method in interface nxopen.uf.UFSket
-
- askSketchOfGeom(Tag) - Method in interface nxopen.uf.UFSket
-
- askSketchOfSweep(Tag) - Method in interface nxopen.uf.UFModlGeneral
-
- askSketchStatus(Tag) - Method in interface nxopen.uf.UFSket
-
- AskSketchStatusData() - Constructor for class nxopen.uf.UFSket.AskSketchStatusData
-
- askSketFrecEid(Tag) - Method in interface nxopen.uf.UFSket
-
- askSmartContainerSubtype(Tag) - Method in interface nxopen.uf.UFModl
-
- askSmbend(Tag) - Method in interface nxopen.uf.UFModlSmd
-
- askSmbendCorner(Tag) - Method in interface nxopen.uf.UFModlSmd
-
- askSmbendCylinder(Tag) - Method in interface nxopen.uf.UFModlSmd
-
- askSmcorner(Tag) - Method in interface nxopen.uf.UFModlSmd
-
- askSmcutout(Tag) - Method in interface nxopen.uf.UFModlSmd
-
- askSmhole(Tag) - Method in interface nxopen.uf.UFModlSmd
-
- askSmpunch(Tag) - Method in interface nxopen.uf.UFModlSmd
-
- askSmslot(Tag) - Method in interface nxopen.uf.UFModlSmd
-
- askSnipSurfaceFeatureData(Tag) - Method in interface nxopen.uf.UFModlFeatures
-
- askSolidFaceOfFaceId(Tag, int) - Method in interface nxopen.uf.UFFacet
-
- askSolidFaceOfFacet(Tag, int) - Method in interface nxopen.uf.UFFacet
-
- askSolidOfModel(Tag) - Method in interface nxopen.uf.UFFacet
-
- askSolidOfPromFeat(Tag) - Method in interface nxopen.uf.UFModlGeneral
-
- askSolidOfSection(Tag) - Method in interface nxopen.uf.UFDraw
-
- askSolidPunch(Tag) - Method in interface nxopen.uf.UFModlSmd
-
- askSolutionDescriptorNx(Tag, String) - Method in interface nxopen.uf.UFSfl
-
- askSolutionNx(Tag) - Method in interface nxopen.uf.UFSf
-
- AskSolutionNxData() - Constructor for class nxopen.uf.UFSf.AskSolutionNxData
-
- askSolverDofCount() - Method in interface nxopen.uf.UFMotion
-
- askSolverNx(String) - Method in interface nxopen.uf.UFSfl
-
- askSolverParameters() - Method in interface nxopen.uf.UFMotion
-
- askSourceObject(Tag, boolean) - Method in interface nxopen.uf.UFProcessAid
-
- AskSourceObjectData() - Constructor for class nxopen.uf.UFProcessAid.AskSourceObjectData
-
- askSourceType(UFVariant) - Method in interface nxopen.uf.UFMfm
-
- askSpacingOfWelds(Tag) - Method in interface nxopen.uf.UFWeld
-
- askSphereParms(Tag, int) - Method in interface nxopen.uf.UFModlFeatures
-
- askSpline(UFVariant) - Method in interface nxopen.uf.UFEval
-
- askSpline(Tag) - Method in interface nxopen.uf.UFSo
-
- askSplineControlPts(UFVariant) - Method in interface nxopen.uf.UFEval
-
- AskSplineControlPtsData() - Constructor for class nxopen.uf.UFEval.AskSplineControlPtsData
-
- askSplineFeature(Tag) - Method in interface nxopen.uf.UFCurve
-
- askSplineKnots(UFVariant) - Method in interface nxopen.uf.UFEval
-
- AskSplineKnotsData() - Constructor for class nxopen.uf.UFEval.AskSplineKnotsData
-
- askSplineSap(Tag) - Method in interface nxopen.uf.UFCurve
-
- AskSplineSapData() - Constructor for class nxopen.uf.UFCurve.AskSplineSapData
-
- askSplineThruPts(Tag) - Method in interface nxopen.uf.UFCurve
-
- AskSplineThruPtsData() - Constructor for class nxopen.uf.UFCurve.AskSplineThruPtsData
-
- askSplitEdges(Tag) - Method in interface nxopen.uf.UFModeling
-
- AskSplitEdgesData() - Constructor for class nxopen.uf.UFModeling.AskSplitEdgesData
-
- askSplitFaces(Tag) - Method in interface nxopen.uf.UFModeling
-
- AskSplitFacesData() - Constructor for class nxopen.uf.UFModeling.AskSplitFacesData
-
- askSpotFaceData(Tag) - Method in interface nxopen.uf.UFWeld
-
- AskSpotFaceData() - Constructor for class nxopen.uf.UFWeld.AskSpotFaceData
-
- askSpotFaceInfo(Tag) - Method in interface nxopen.uf.UFWeld
-
- AskSpotFaceInfoData() - Constructor for class nxopen.uf.UFWeld.AskSpotFaceInfoData
-
- askSpring(Tag) - Method in interface nxopen.uf.UFMotion
-
- askSpringData(FEElement) - Method in interface nxopen.cae.ElementAssociatedDataUtils
-
Returns spring element associated data.
- AskSpringData() - Constructor for class nxopen.cae.ElementAssociatedDataUtils.AskSpringData
-
- askSrfanlParams() - Method in interface nxopen.uf.UFDisp
-
- askStableIdOfInstance(Tag) - Method in interface nxopen.uf.UFAssem
-
- askStatus(int) - Method in interface nxopen.uf.UFLayer
-
- askStatus(Tag) - Method in interface nxopen.uf.UFObj
-
- askStatus(Tag) - Method in interface nxopen.uf.UFOper
-
Deprecated.
- askStatus(Tag) - Method in interface nxopen.uf.UFPart
-
- askStatus1(Tag) - Method in interface nxopen.uf.UFOper
-
- askStatusSendNcCommandMsg(UFVariant) - Method in interface nxopen.uf.UFSim
-
- askStepDuration(Tag) - Method in interface nxopen.uf.UFAssem
-
- askStepElementDurations(Tag) - Method in interface nxopen.uf.UFAssem
-
- AskStepElementDurationsData() - Constructor for class nxopen.uf.UFAssem.AskStepElementDurationsData
-
- askStepIncrement(Tag) - Method in interface nxopen.uf.UFAssem
-
- askStepNumber(Tag) - Method in interface nxopen.uf.UFAssem
-
- askStepNx(Tag) - Method in interface nxopen.uf.UFSf
-
- AskStepNxData() - Constructor for class nxopen.uf.UFSf.AskStepNxData
-
- askSteppedSxline(Tag) - Method in interface nxopen.uf.UFDraw
-
- AskSteppedSxlineData() - Constructor for class nxopen.uf.UFDraw.AskSteppedSxlineData
-
- askSteps(Tag) - Method in interface nxopen.uf.UFAssem
-
- AskStepsData() - Constructor for class nxopen.uf.UFAssem.AskStepsData
-
- askStepsOfPartOcc(Tag, Tag) - Method in interface nxopen.uf.UFAssem
-
- AskStepsOfPartOccData() - Constructor for class nxopen.uf.UFAssem.AskStepsOfPartOccData
-
- askStepType(Tag) - Method in interface nxopen.uf.UFAssem
-
- askStlFileType(String) - Method in interface nxopen.uf.UFStd
-
- askStockAnchor(Tag) - Method in interface nxopen.uf.UFRoute
-
- askStockBody(Tag) - Method in interface nxopen.uf.UFRoute
-
- askStockCrossSect(Tag) - Method in interface nxopen.uf.UFRoute
-
- askStockDataAnchors(Tag) - Method in interface nxopen.uf.UFRoute
-
- AskStockDataAnchorsData() - Constructor for class nxopen.uf.UFRoute.AskStockDataAnchorsData
-
- askStockDataCross(Tag) - Method in interface nxopen.uf.UFRoute
-
- AskStockDataCrossData() - Constructor for class nxopen.uf.UFRoute.AskStockDataCrossData
-
- askStockDataStock(Tag) - Method in interface nxopen.uf.UFRoute
-
- AskStockDataStockData() - Constructor for class nxopen.uf.UFRoute.AskStockDataStockData
-
- askStockDiameter(Tag) - Method in interface nxopen.uf.UFRoute
-
- askStockFeature(Tag) - Method in interface nxopen.uf.UFRoute
-
- askStockHarness(Tag) - Method in interface nxopen.uf.UFRoute
-
- AskStockHarnessData() - Constructor for class nxopen.uf.UFRoute.AskStockHarnessData
-
- askStockPartOcc(Tag) - Method in interface nxopen.uf.UFRoute
-
- askStockPorts(Tag) - Method in interface nxopen.uf.UFRoute
-
- askStockProfilePort(Tag) - Method in interface nxopen.uf.UFRoute
-
- askStockRotation(Tag) - Method in interface nxopen.uf.UFRoute
-
- askStockSegments(Tag) - Method in interface nxopen.uf.UFRoute
-
- AskStockSegmentsData() - Constructor for class nxopen.uf.UFRoute.AskStockSegmentsData
-
- askStockStockData(Tag) - Method in interface nxopen.uf.UFRoute
-
- askStockStyle(Tag) - Method in interface nxopen.uf.UFRoute
-
- askStockUnits(Tag) - Method in interface nxopen.uf.UFRoute
-
- askStockWires(Tag) - Method in interface nxopen.uf.UFRoute
-
- AskStockWiresData() - Constructor for class nxopen.uf.UFRoute.AskStockWiresData
-
- askString(UFVariant) - Method in interface nxopen.uf.UFKf
-
- askString(UFVariant, String) - Method in interface nxopen.uf.UFMom
-
- askString(UFVariant, String) - Method in interface nxopen.uf.UFUde
-
- askStringArray(UFVariant, String, int) - Method in interface nxopen.uf.UFMom
-
- askStringInput(String, String) - Method in interface nxopen.uf.UFUi
-
- AskStringInputData() - Constructor for class nxopen.uf.UFUi.AskStringInputData
-
- AskStringInputReturn - Variable in class nxopen.uf.UFUi.AskStringInputData
-
- askStringOfCriteria(Tag, UFVariant, String) - Method in interface nxopen.uf.UFFbmGeom
-
- askStringOfName(int) - Method in interface nxopen.uf.UFKf
-
- askStringValueOfAttribute(UFVariant, String) - Method in interface nxopen.uf.UFMfm
-
- AskStringValueOfAttributeData() - Constructor for class nxopen.uf.UFMfm.AskStringValueOfAttributeData
-
- askStringValueOfClassifiedCrit(Tag, String, UFVariant, int) - Method in interface nxopen.uf.UFFbmGeom
-
- askStrValue(Tag, int) - Method in interface nxopen.uf.UFParam
-
- askStycornerData(Tag) - Method in interface nxopen.uf.UFModlFeatures
-
- askSubdivFaceParms(Tag) - Method in interface nxopen.uf.UFModeling
-
- AskSubdivFaceParmsData() - Constructor for class nxopen.uf.UFModeling.AskSubdivFaceParmsData
-
- askSubFeatures(Tag) - Method in interface nxopen.uf.UFGdt
-
- AskSubFeaturesData() - Constructor for class nxopen.uf.UFGdt.AskSubFeaturesData
-
- askSuperFeature(Tag) - Method in interface nxopen.uf.UFGdt
-
- askSuppressExpTag(Tag) - Method in interface nxopen.uf.UFModlGeneral
-
- askSuppressFeature(Tag) - Method in interface nxopen.uf.UFModeling
-
- askSuppressionExp(Tag) - Method in interface nxopen.uf.UFAssem
-
- askSuppressList() - Method in interface nxopen.uf.UFModeling
-
- askSuppressPreZeros() - Method in interface nxopen.uf.UFDrf
-
- askSuppressState(Tag) - Method in interface nxopen.uf.UFAssem
-
- askSuppressViewUpdat() - Method in interface nxopen.uf.UFDraw
-
- askSuppressViewUpdate() - Method in interface nxopen.uf.UFDrf
-
- askSurfaceDataForFace(Tag) - Method in interface nxopen.uf.UFFacet
-
- AskSurfaceDataForFaceData() - Constructor for class nxopen.uf.UFFacet.AskSurfaceDataForFaceData
-
- askSurfaceDisplayOptions(Tag) - Method in interface nxopen.uf.UFView
-
- AskSurfaceDisplayOptionsData() - Constructor for class nxopen.uf.UFView.AskSurfaceDisplayOptionsData
-
- askSurfaceIdentifier(UFVariant) - Method in interface nxopen.uf.UFDrpos
-
- askSurfaceParams(UFVariant) - Method in interface nxopen.uf.UFDrpos
-
- askSweep(Tag) - Method in interface nxopen.uf.UFModlFeatures
-
- askSweepCurves(Tag) - Method in interface nxopen.uf.UFModl
-
- AskSweepCurvesData() - Constructor for class nxopen.uf.UFModl.AskSweepCurvesData
-
- AskSweepData() - Constructor for class nxopen.uf.UFModlFeatures.AskSweepData
-
- askSweepDirection(Tag) - Method in interface nxopen.uf.UFModl
-
- AskSweepDirectionData() - Constructor for class nxopen.uf.UFModl.AskSweepDirectionData
-
- askSweepOfUdf(Tag) - Method in interface nxopen.uf.UFModlGeneral
-
- askSweepParms(Tag, int) - Method in interface nxopen.uf.UFModl
-
- AskSweepParmsData() - Constructor for class nxopen.uf.UFModl.AskSweepParmsData
-
- askSxedgesOfSxsolid(Tag) - Method in interface nxopen.uf.UFDraw
-
- AskSxedgesOfSxsolidData() - Constructor for class nxopen.uf.UFDraw.AskSxedgesOfSxsolidData
-
- askSxlineDefaultPrfs() - Method in interface nxopen.uf.UFDraw
-
- AskSxlineDefaultPrfsData() - Constructor for class nxopen.uf.UFDraw.AskSxlineDefaultPrfsData
-
- askSxlineDisplay(Tag) - Method in interface nxopen.uf.UFDraw
-
- AskSxlineDisplayData() - Constructor for class nxopen.uf.UFDraw.AskSxlineDisplayData
-
- askSxlineOfSxview(Tag) - Method in interface nxopen.uf.UFDraw
-
- askSxlineSxseg(Tag) - Method in interface nxopen.uf.UFDraw
-
- AskSxlineSxsegData() - Constructor for class nxopen.uf.UFDraw.AskSxlineSxsegData
-
- askSxlineType(Tag) - Method in interface nxopen.uf.UFDraw
-
- askSxsolidsOfSxview(Tag, UFDraw.SxlineLeg) - Method in interface nxopen.uf.UFDraw
-
- AskSxsolidsOfSxviewData() - Constructor for class nxopen.uf.UFDraw.AskSxsolidsOfSxviewData
-
- askSxviewDisplay(Tag) - Method in interface nxopen.uf.UFDraw
-
- askSymbolData(Tag) - Method in interface nxopen.uf.UFDrf
-
- askSymbolDataFromName(String) - Method in interface nxopen.uf.UFDrf
-
- AskSymbolDataFromNameData() - Constructor for class nxopen.uf.UFDrf.AskSymbolDataFromNameData
-
- askSymbolMirrorAndFlip(Tag) - Method in interface nxopen.uf.UFDrf
-
- AskSymbolMirrorAndFlipData() - Constructor for class nxopen.uf.UFDrf.AskSymbolMirrorAndFlipData
-
- askSymbolPreferences(UFDrf.SymbolPreferences) - Method in interface nxopen.uf.UFDrf
-
- askSymbThreadParms(Tag) - Method in interface nxopen.uf.UFModeling
-
- askSyslogFilename() - Method in interface nxopen.uf.UF
-
- askSystemInfo() - Method in interface nxopen.uf.UF
-
- askSystemParameters() - Method in interface nxopen.uf.UFDisp
-
- askTableOfInstance(Tag) - Method in interface nxopen.uf.UFGdt
-
- askTabularNoteDefaults() - Method in interface nxopen.uf.UFDraw
-
- askTabularNoteOfColumn(Tag) - Method in interface nxopen.uf.UFTabnot
-
- askTabularNoteOfSection(Tag) - Method in interface nxopen.uf.UFTabnot
-
- askTabularNoteParams(Tag) - Method in interface nxopen.uf.UFDraw
-
- AskTabularNoteParamsData() - Constructor for class nxopen.uf.UFDraw.AskTabularNoteParamsData
-
- askTag(UFVariant) - Method in interface nxopen.uf.UFKf
-
- askTag() - Method in interface nxopen.uf.UFPlist
-
- askTagOfDispName(String) - Method in interface nxopen.uf.UFPart
-
- askTagOfHandle(String) - Method in interface nxopen.uf.UFTag
-
- askTagOfNote(Tag) - Method in interface nxopen.uf.UFPlist
-
- askTagOfViewName(String) - Method in interface nxopen.uf.UFView
-
- askTags(Tag) - Method in interface nxopen.uf.UFGdt
-
- askTags() - Method in interface nxopen.uf.UFPlist
-
- AskTagsData() - Constructor for class nxopen.uf.UFGdt.AskTagsData
-
- AskTagsData() - Constructor for class nxopen.uf.UFPlist.AskTagsData
-
- askTagsRemaining() - Method in interface nxopen.uf.UFPs
-
- askTagValue(Tag, int) - Method in interface nxopen.uf.UFParam
-
- askTagVla(Tag, int) - Method in interface nxopen.uf.UFParam
-
- AskTagVlaData() - Constructor for class nxopen.uf.UFParam.AskTagVlaData
-
- askTaperFromEdges(Tag) - Method in interface nxopen.uf.UFModlFeatures
-
- askTaperFromEdges1(Tag) - Method in interface nxopen.uf.UFModlFeatures
-
- AskTaperFromEdges1Data() - Constructor for class nxopen.uf.UFModlFeatures.AskTaperFromEdges1Data
-
- AskTaperFromEdgesData() - Constructor for class nxopen.uf.UFModlFeatures.AskTaperFromEdgesData
-
- askTaperHoleParms(Tag, int) - Method in interface nxopen.uf.UFModlFeatures
-
- AskTaperHoleParmsData() - Constructor for class nxopen.uf.UFModlFeatures.AskTaperHoleParmsData
-
- askTaperParms(Tag, int) - Method in interface nxopen.uf.UFModlFeatures
-
- askTargetAreaXhatch(Tag) - Method in interface nxopen.uf.UFGdt
-
- AskTargetAreaXhatchData() - Constructor for class nxopen.uf.UFGdt.AskTargetAreaXhatchData
-
- askTargetCylParms(Tag) - Method in interface nxopen.uf.UFGdt
-
- askTargetDiaParms(Tag) - Method in interface nxopen.uf.UFGdt
-
- askTargetLineParms(Tag) - Method in interface nxopen.uf.UFGdt
-
- askTargetPointParms(Tag) - Method in interface nxopen.uf.UFGdt
-
- askTargetRectParms(Tag) - Method in interface nxopen.uf.UFGdt
-
- askTargetsOfDatum(Tag) - Method in interface nxopen.uf.UFGdt
-
- AskTargetsOfDatumData() - Constructor for class nxopen.uf.UFGdt.AskTargetsOfDatumData
-
- askTargetUdefParms(Tag) - Method in interface nxopen.uf.UFGdt
-
- askTaxisOption(UFVariant) - Method in interface nxopen.uf.UFDpud
-
- askTemplateFilename(Tag) - Method in interface nxopen.uf.UFPart
-
- askTerminalMultiport(Tag) - Method in interface nxopen.uf.UFRoute
-
- askTerminalPortUid(Tag) - Method in interface nxopen.uf.UFRoute
-
- askTextAboveLeader() - Method in interface nxopen.uf.UFDrf
-
- askTextData(int, int[]) - Method in interface nxopen.uf.UFDrf
-
- AskTextData() - Constructor for class nxopen.uf.UFDrf.AskTextData
-
- askTextMode() - Method in interface nxopen.uf.UFText
-
- askTextureSpaceInfo(Tag) - Method in interface nxopen.uf.UFDisp
-
- AskTextureSpaceInfoData() - Constructor for class nxopen.uf.UFDisp.AskTextureSpaceInfoData
-
- askThickenSheetParms(Tag) - Method in interface nxopen.uf.UFModl
-
- AskThickenSheetParmsData() - Constructor for class nxopen.uf.UFModl.AskThickenSheetParmsData
-
- askThruCurves(Tag) - Method in interface nxopen.uf.UFModlFeatures
-
- askThruCurves1(Tag) - Method in interface nxopen.uf.UFModlFeatures
-
- AskThruCurves1Data() - Constructor for class nxopen.uf.UFModlFeatures.AskThruCurves1Data
-
- AskThruCurvesData() - Constructor for class nxopen.uf.UFModlFeatures.AskThruCurvesData
-
- askThruFaces(Tag) - Method in interface nxopen.uf.UFModeling
-
- AskThruFacesData() - Constructor for class nxopen.uf.UFModeling.AskThruFacesData
-
- askTimeOfSequence(Tag) - Method in interface nxopen.uf.UFAssem
-
- askTimeOfStep(Tag) - Method in interface nxopen.uf.UFAssem
-
- askTimeStampOfFeature(Tag) - Method in interface nxopen.uf.UFModeling
-
- askTinyGeometry(Tag, double) - Method in interface nxopen.uf.UFModeling
-
- askToggleState(int) - Method in interface nxopen.uf.UFMb
-
- askToItems(Tag) - Method in interface nxopen.uf.UFRouteRun
-
- AskToItemsData() - Constructor for class nxopen.uf.UFRouteRun.AskToItemsData
-
- askTolerance(Tag, UFGdt.ToleranceType) - Method in interface nxopen.uf.UFGdt
-
- askToleranceFromIndex(int) - Method in interface nxopen.uf.UFGdt
-
- AskToleranceFromIndexData() - Constructor for class nxopen.uf.UFGdt.AskToleranceFromIndexData
-
- askToleranceIndex(Tag) - Method in interface nxopen.uf.UFGdt
-
- askToleranceIndexString(Tag) - Method in interface nxopen.uf.UFGdt
-
- askTolerances(Tag) - Method in interface nxopen.uf.UFGdt
-
- AskTolerancesData() - Constructor for class nxopen.uf.UFGdt.AskTolerancesData
-
- askToleranceTypes(Tag) - Method in interface nxopen.uf.UFGdt
-
- AskToleranceTypesData() - Constructor for class nxopen.uf.UFGdt.AskToleranceTypesData
-
- askTolerancingStandard() - Method in interface nxopen.uf.UFGdt
-
- askTolFeatInstance(Tag) - Method in interface nxopen.uf.UFGdt
-
- AskTolFeatInstanceData() - Constructor for class nxopen.uf.UFGdt.AskTolFeatInstanceData
-
- askTolFeatOfInstance(Tag) - Method in interface nxopen.uf.UFGdt
-
- askTolFeatTag(Tag) - Method in interface nxopen.uf.UFGdt
-
- askToolAxis(UFVariant) - Method in interface nxopen.uf.UFDpud
-
- askToolAxis(UFVariant) - Method in interface nxopen.uf.UFDrpos
-
- askToolbarVis(UFVariant) - Method in interface nxopen.uf.UFUi
-
- askToolMatlDbObject() - Method in interface nxopen.uf.UFCam
-
- askToolOffsets(UFVariant, String) - Method in interface nxopen.uf.UFSim
-
- AskToolOffsetsData() - Constructor for class nxopen.uf.UFSim.AskToolOffsetsData
-
- askToolTipJunction() - Method in interface nxopen.cam.ManageToolPartBuilder
-
The tool_tip_tracking_point, tool_tip_radius_id parameters apply for turning tools only.
- AskToolTipJunctionData() - Constructor for class nxopen.cam.ManageToolPartBuilder.AskToolTipJunctionData
-
- askTopOffLevel(UFCutLevels.CutLevels, int) - Method in interface nxopen.uf.UFCutLevels
-
- askTorqueResults(Tag, UFMotion.VectorComponent, UFMotion.ReferenceFrame) - Method in interface nxopen.uf.UFMotion
-
- AskTorqueResultsData() - Constructor for class nxopen.uf.UFMotion.AskTorqueResultsData
-
- askTorusParms(Tag, int) - Method in interface nxopen.uf.UFModlGeneral
-
- AskTorusParmsData() - Constructor for class nxopen.uf.UFModlGeneral.AskTorusParmsData
-
- askTrace(Tag) - Method in interface nxopen.uf.UFMotion
-
- askTraceExplosionToMaster(boolean[]) - Method in interface nxopen.uf.UFMotion
-
- askTrackingPointCount(Tag) - Method in interface nxopen.uf.UFCutter
-
- askTransDisplacementResults(Tag, UFMotion.VectorComponent, UFMotion.ReferenceFrame) - Method in interface nxopen.uf.UFMotion
-
- AskTransDisplacementResultsData() - Constructor for class nxopen.uf.UFMotion.AskTransDisplacementResultsData
-
- askTransformOfOcc(Tag) - Method in interface nxopen.uf.UFAssem
-
- askTranslation(double[]) - Method in interface nxopen.uf.UFMtx4
-
- askTranslucency(Tag) - Method in interface nxopen.uf.UFObj
-
- askTraversalSettings(Tag) - Method in interface nxopen.uf.UFPlist
-
- askTSlotParms(Tag, int) - Method in interface nxopen.uf.UFModl
-
- AskTSlotParmsData() - Constructor for class nxopen.uf.UFModl.AskTSlotParmsData
-
- askTxIntpDataType(Tag) - Method in interface nxopen.uf.UFScop
-
- askTxIntpMethod(Tag) - Method in interface nxopen.uf.UFScop
-
- askTxIntpVectorData(Tag) - Method in interface nxopen.uf.UFScop
-
- AskTxIntpVectorData() - Constructor for class nxopen.uf.UFScop.AskTxIntpVectorData
-
- askType(UFVariant) - Method in interface nxopen.uf.UFDrpos
-
- askType(UFVariant) - Method in interface nxopen.uf.UFKf
-
- askType(Tag) - Method in interface nxopen.uf.UFSubdiv
-
- askType(Tag) - Method in interface nxopen.uf.UFSurfReg
-
- askType(Tag) - Method in interface nxopen.uf.UFView
-
- askTypeAndSubtype(Tag) - Method in interface nxopen.uf.UFCutter
-
- askTypeAndSubtype(Tag) - Method in interface nxopen.uf.UFObj
-
- AskTypeAndSubtypeData() - Constructor for class nxopen.uf.UFCutter.AskTypeAndSubtypeData
-
- AskTypeAndSubtypeData() - Constructor for class nxopen.uf.UFObj.AskTypeAndSubtypeData
-
- AskTypeData() - Constructor for class nxopen.uf.UFView.AskTypeData
-
- askTypeOfArray(Tag) - Method in interface nxopen.uf.UFAssem
-
- askTypeOfCriterion(Tag, String) - Method in interface nxopen.uf.UFFbmGeom
-
- askUdes(Tag, UFUde.SetType) - Method in interface nxopen.uf.UFParam
-
- AskUdesData() - Constructor for class nxopen.uf.UFParam.AskUdesData
-
- askUdfDefinition(Tag) - Method in interface nxopen.uf.UFModlGeneral
-
- AskUdfDefinitionData() - Constructor for class nxopen.uf.UFModlGeneral.AskUdfDefinitionData
-
- askUdfParms(Tag) - Method in interface nxopen.uf.UFModlGeneral
-
- AskUdfParmsData() - Constructor for class nxopen.uf.UFModlGeneral.AskUdfParmsData
-
- askUdop(UFVariant) - Method in interface nxopen.uf.UFUdop
-
- askUdsObjectSize(Tag) - Method in interface nxopen.uf.UFDrf
-
- askUdSymbolFontInfo(Tag) - Method in interface nxopen.uf.UFDrf
-
- AskUdSymbolFontInfoData() - Constructor for class nxopen.uf.UFDrf.AskUdSymbolFontInfoData
-
- askUgObject(UFVariant) - Method in interface nxopen.uf.UFKf
-
- askUGrooveParms(Tag, int) - Method in interface nxopen.uf.UFModlFeatures
-
- AskUGrooveParmsData() - Constructor for class nxopen.uf.UFModlFeatures.AskUGrooveParmsData
-
- askUgs2dMeshParms(Tag) - Method in interface nxopen.uf.UFSf
-
- askUgsTetMeshParms(Tag) - Method in interface nxopen.uf.UFSf
-
- askUnfoldedSxline(Tag) - Method in interface nxopen.uf.UFDraw
-
- AskUnfoldedSxlineData() - Constructor for class nxopen.uf.UFDraw.AskUnfoldedSxlineData
-
- askUnitBasis(Tag) - Method in interface nxopen.uf.UFGdt
-
- AskUnitBasisData() - Constructor for class nxopen.uf.UFGdt.AskUnitBasisData
-
- askUnitNameFromUnitTag(Tag) - Method in interface nxopen.uf.UFUnit
-
- askUnits(Tag) - Method in interface nxopen.uf.UFPart
-
- askUnitsFormatPreferences(UFDrf.UnitsFormatPreferences) - Method in interface nxopen.uf.UFDrf
-
- askUnprocessedPartoccs(Tag) - Method in interface nxopen.uf.UFAssem
-
- AskUnprocessedPartoccsData() - Constructor for class nxopen.uf.UFAssem.AskUnprocessedPartoccsData
-
- askUpdateErrorCode(Tag) - Method in interface nxopen.uf.UFSo
-
- askUpdateErrorMessage(Tag) - Method in interface nxopen.uf.UFModeling
-
- askUpdateFailOption() - Method in interface nxopen.uf.UFModeling
-
- askUpdatePending() - Method in interface nxopen.cae.BaseFEModel
-
This method will inform caller if the finite element model is in an update pending state or not.
- askUpdateUndoFeat() - Method in interface nxopen.uf.UFModeling
-
- AskUpdateUndoFeatData() - Constructor for class nxopen.uf.UFModeling.AskUpdateUndoFeatData
-
- askUsedArrangement(Tag) - Method in interface nxopen.uf.UFAssem
-
- askUsedCriteria(Tag) - Method in interface nxopen.uf.UFFbmGeom
-
- AskUsedCriteriaData() - Constructor for class nxopen.uf.UFFbmGeom.AskUsedCriteriaData
-
- askUser(UFVariant) - Method in interface nxopen.uf.UFKf
-
- askUserClassDir() - Method in interface nxopen.uf.UFKf
-
- askUserDfaClasses(String) - Method in interface nxopen.uf.UFKfUgmgr
-
- AskUserDfaClassesData() - Constructor for class nxopen.uf.UFKfUgmgr.AskUserDfaClassesData
-
- askUserDfaFuncs(String) - Method in interface nxopen.uf.UFKfUgmgr
-
- AskUserDfaFuncsData() - Constructor for class nxopen.uf.UFKfUgmgr.AskUserDfaFuncsData
-
- askUserFolder(String) - Method in interface nxopen.uf.UFUgmgr
-
- askUserRole() - Method in interface nxopen.uf.UFUgmgr
-
- askUSlotParms(Tag, int) - Method in interface nxopen.uf.UFModl
-
- AskUSlotParmsData() - Constructor for class nxopen.uf.UFModl.AskUSlotParmsData
-
- askUvPointsContainment(int, double, double, Tag) - Method in interface nxopen.uf.UFModeling
-
- askValidationAbortOption() - Method in interface nxopen.uf.UFClone
-
- askValidationOptions(String) - Method in interface nxopen.uf.UFClone
-
- askValueOfListItem(UFVariant, int) - Method in interface nxopen.uf.UFKf
-
- AskValueOfListItemData() - Constructor for class nxopen.uf.UFKf.AskValueOfListItemData
-
- askVariantConfigurationsForDisplay(Tag) - Method in interface nxopen.uf.UFUgmgr
-
- AskVariantConfigurationsForDisplayData() - Constructor for class nxopen.uf.UFUgmgr.AskVariantConfigurationsForDisplayData
-
- askVariantConfigurationsForLoad() - Method in interface nxopen.uf.UFUgmgr
-
- AskVariantConfigurationsForLoadData() - Constructor for class nxopen.uf.UFUgmgr.AskVariantConfigurationsForLoadData
-
- askVda4955Compliance(Tag, String, String, String) - Method in interface nxopen.uf.UFModl
-
- askVdeData(Tag) - Method in interface nxopen.uf.UFView
-
- AskVdeData() - Constructor for class nxopen.uf.UFView.AskVdeData
-
- askVdeDataWithType(Tag) - Method in interface nxopen.uf.UFView
-
- AskVdeDataWithTypeData() - Constructor for class nxopen.uf.UFView.AskVdeDataWithTypeData
-
- askVector(UFVariant) - Method in interface nxopen.uf.UFKf
-
- askVector(UFVariant, String) - Method in interface nxopen.uf.UFUde
-
- askVectorAngle(double[], double[]) - Method in interface nxopen.uf.UFModeling
-
- AskVectorAngleData() - Constructor for class nxopen.uf.UFModeling.AskVectorAngleData
-
- askVectorForceTorque(Tag) - Method in interface nxopen.uf.UFMotion
-
- askVelocityResults(Tag, UFMotion.MotionType, UFMotion.VectorComponent, UFMotion.ReferenceFrame) - Method in interface nxopen.uf.UFMotion
-
- AskVelocityResultsData() - Constructor for class nxopen.uf.UFMotion.AskVelocityResultsData
-
- askVertDime(Tag, Tag, int) - Method in interface nxopen.uf.UFModeling
-
- AskVertDimeData() - Constructor for class nxopen.uf.UFModeling.AskVertDimeData
-
- askVertexConvexity(Tag, int, int) - Method in interface nxopen.uf.UFFacet
-
- askVerticalNote(Tag) - Method in interface nxopen.uf.UFDrf
-
- askVerticesOfFacet(Tag, int) - Method in interface nxopen.uf.UFFacet
-
- AskVerticesOfFacetData() - Constructor for class nxopen.uf.UFFacet.AskVerticesOfFacetData
-
- askView() - Method in interface nxopen.uf.UFUiOnt
-
- askViewAnchor(Tag) - Method in interface nxopen.uf.UFDraw
-
- askViewAngle(Tag) - Method in interface nxopen.uf.UFDraw
-
- askViewBorders(Tag) - Method in interface nxopen.uf.UFDraw
-
- askViewDependentStatus(Tag) - Method in interface nxopen.uf.UFView
-
- AskViewDependentStatusData() - Constructor for class nxopen.uf.UFView.AskViewDependentStatusData
-
- askViewDisplay(Tag) - Method in interface nxopen.uf.UFDraw
-
- askViewExplosion(Tag) - Method in interface nxopen.uf.UFAssem
-
- askViewLabel(Tag) - Method in interface nxopen.uf.UFDraw
-
- askViewLabelParms(Tag, UFDraw.ViewLabelParms) - Method in interface nxopen.uf.UFDraw
-
- AskViewLabelParmsData() - Constructor for class nxopen.uf.UFDraw.AskViewLabelParmsData
-
- AskViewLabelParmsReturn - Variable in class nxopen.uf.UFDraw.AskViewLabelParmsData
-
- askViewLight(Tag) - Method in interface nxopen.uf.UFView
-
- askViewNotes(Tag) - Method in interface nxopen.uf.UFDraw
-
- AskViewNotesData() - Constructor for class nxopen.uf.UFDraw.AskViewNotesData
-
- askViewOfDrawing(Tag) - Method in interface nxopen.uf.UFDraw
-
- askViewOfNote(Tag) - Method in interface nxopen.uf.UFDraw
-
- askViewOfViewLabel(Tag) - Method in interface nxopen.uf.UFDraw
-
- askViewParmScale(Tag) - Method in interface nxopen.uf.UFDraw
-
- AskViewParmScaleData() - Constructor for class nxopen.uf.UFDraw.AskViewParmScaleData
-
- askViews(Tag) - Method in interface nxopen.uf.UFDraw
-
- askViewScale(Tag) - Method in interface nxopen.uf.UFDraw
-
- AskViewScaleData() - Constructor for class nxopen.uf.UFDraw.AskViewScaleData
-
- AskViewsData() - Constructor for class nxopen.uf.UFDraw.AskViewsData
-
- askViewSetByName(String) - Method in interface nxopen.uf.UFView
-
- askViewsOfViewSet(Tag) - Method in interface nxopen.uf.UFView
-
- AskViewsOfViewSetData() - Constructor for class nxopen.uf.UFView.AskViewsOfViewSetData
-
- askViewStatus(Tag) - Method in interface nxopen.uf.UFDraw
-
- askViewThdAppPitch(Tag) - Method in interface nxopen.uf.UFDraw
-
- askViewThdMeth(Tag) - Method in interface nxopen.uf.UFDraw
-
- askVisibilityOption(Tag) - Method in interface nxopen.uf.UFSo
-
- askVisibleObjects(Tag) - Method in interface nxopen.uf.UFView
-
- askVisibleObjects() - Method in interface nxopen.View
-
Returns an array of objects visible in a view.
- AskVisibleObjectsData() - Constructor for class nxopen.uf.UFView.AskVisibleObjectsData
-
- askVisualization(Tag) - Method in interface nxopen.uf.UFView
-
- askWaveFeature() - Method in interface nxopen.routing.Port
-
- askWcs() - Method in interface nxopen.uf.UFCsys
-
- askWeldSymbol(Tag) - Method in interface nxopen.uf.UFDrf
-
- AskWeldSymbolData() - Constructor for class nxopen.uf.UFDrf.AskWeldSymbolData
-
- askWireHarness(Tag) - Method in interface nxopen.uf.UFRoute
-
- AskWireHarnessData() - Constructor for class nxopen.uf.UFRoute.AskWireHarnessData
-
- askWireSegments(Tag) - Method in interface nxopen.uf.UFRoute
-
- AskWireSegmentsData() - Constructor for class nxopen.uf.UFRoute.AskWireSegmentsData
-
- askWireStock(Tag) - Method in interface nxopen.uf.UFRoute
-
- AskWireStockData() - Constructor for class nxopen.uf.UFRoute.AskWireStockData
-
- askWorkingList() - Method in interface nxopen.features.shipdesign.PenetrationUtils
-
Ask current
PenetrationList
License requirements: nx_penetration_mgmt ("Penetration Management")
Created in NX8.0.0
- askWorkLayer() - Method in interface nxopen.uf.UFLayer
-
- askWorkOccurrence() - Method in interface nxopen.uf.UFAssem
-
- askWorkPart() - Method in interface nxopen.uf.UFAssem
-
- askWorkPartMaterialLwaUserAreaData(Tag, String) - Method in interface nxopen.uf.UFDisp
-
- askWorkPlaneDimClr() - Method in interface nxopen.uf.UFDisp
-
- askWorkPlaneEmphasis() - Method in interface nxopen.uf.UFDisp
-
- askWorkPlaneSel() - Method in interface nxopen.uf.UFDisp
-
- askWorkView() - Method in interface nxopen.uf.UFView
-
- askWrapAssembly(Tag) - Method in interface nxopen.uf.UFModeling
-
- askWrapCurveParents(Tag) - Method in interface nxopen.uf.UFCurve
-
- AskWrapCurveParentsData() - Constructor for class nxopen.uf.UFCurve.AskWrapCurveParentsData
-
- askWrapCurves(Tag) - Method in interface nxopen.uf.UFCurve
-
- AskWrapCurvesData() - Constructor for class nxopen.uf.UFCurve.AskWrapCurvesData
-
- askWrapGeometry(Tag) - Method in interface nxopen.uf.UFModeling
-
- askWrapParms(Tag) - Method in interface nxopen.uf.UFCurve
-
- askXDirectionOfXform(Tag) - Method in interface nxopen.uf.UFSo
-
- askXformTagOfDatumCsys(Tag) - Method in interface nxopen.uf.UFModlFeatures
-
- askXhatchOfSxsolid(Tag) - Method in interface nxopen.uf.UFDraw
-
- askXyClip(Tag) - Method in interface nxopen.uf.UFView
-
- askYDirectionOfXform(Tag) - Method in interface nxopen.uf.UFSo
-
- askZClip(Tag) - Method in interface nxopen.uf.UFView
-
- AskZClipData() - Constructor for class nxopen.uf.UFView.AskZClipData
-
- askZDirectionOfXform(Tag) - Method in interface nxopen.uf.UFSo
-
- askZigZagDir(UFVariant) - Method in interface nxopen.uf.UFDrpos
-
- askZoomScale(Tag) - Method in interface nxopen.uf.UFView
-
- ASM_ONLY - Static variable in class nxopen.JtCreator.PmiOption
-
ASM_ONLY
- ASME1994 - Static variable in class nxopen.uf.UFGdt.Standard
-
- ASME_ISO11011983 - Static variable in class nxopen.annotations.DatumTargetBuilder.StandardTypes
-
ISO 1101 1983
- ASME_Y1452009 - Static variable in class nxopen.annotations.DatumTargetBuilder.StandardTypes
-
ASME_Y145_2009
- ASME_Y145M1982 - Static variable in class nxopen.annotations.DatumTargetBuilder.StandardTypes
-
ASME_Y145M_1982
- ASME_Y145M1994 - Static variable in class nxopen.annotations.DatumTargetBuilder.StandardTypes
-
Y145M_1994
- asmStructure() - Method in interface nxopen.JtCreator
-
Returns the m_asmStructure * - WriteWhichFiles = JTASSEMBLY
License requirements: None.
- asOriginalOption() - Method in interface nxopen.features.FreeTransformerBuilder
-
Returns the option to use the same colors and layers of the original geometries for creating new geometries
License requirements: None.
- asOriginalOption() - Method in interface nxopen.features.MeshTransformerBuilder
-
Returns the option to use the same colors and layers of the original geometries for creating new geometries
License requirements: None.
- asPatchSurface() - Method in interface nxopen.tooling.EnlargeSurfaceBuilder
-
Returns the value of option, which specifies whether to set the result region as patch surface or not.
- asPatchSurface() - Method in interface nxopen.tooling.TrimRegionBuilder
-
Returns the value of option, which specifies whether to set the result region as patch surface or not.
- ASPECT - Static variable in class nxopen.ame.AMEBaseNode.NodeType
-
- ASPECT - Static variable in class nxopen.ame.EditClauseBuilder.Types
-
- ASPECT - Static variable in class nxopen.ame.InstanceDataBlockBuilder.CreateMode
-
- ASPECT - Static variable in class nxopen.HumanPosturePredictionBuilder.PredictionMethodType
-
Indicate ASPECT H_point method
- aspect() - Method in interface nxopen.mechatronics.LogicObjectBuilder
-
Returns the Aspect.
- ASPECT_CHILDREN - Static variable in class nxopen.ame.SelectAndHighlightBuilder.SelType
-
- ASPECT_PREFIX - Static variable in class nxopen.ame.AspectPrefixBuilder.DelimiterType
-
Aspect Prefix is used as the delimiter
- ASPECT_PREFIX - Static variable in class nxopen.ame.NamingRuleSettingsBuilder.Sources
-
- ASPECT_RATIO - Static variable in class nxopen.cae.modelcheck.TestValueTypes.TestType
-
- ASPECT_STRUCTURE_OVERVIEW - Static variable in class nxopen.ame.DocumentType
-
- ASPECT_STRUCTURE_OVERVIEW - Static variable in class nxopen.ame.PageBuilder.Types
-
- aspectDetails() - Method in interface nxopen.ame.InstantiateTemplateBulkBuilder
-
Returns the aspect details ui block
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- aspectDetails() - Method in interface nxopen.ame.ProjectEngineeringObjectBuilder
-
Returns the aspect detail ui block
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- AspectDetailsBuilder - Interface in nxopen.ame
-
JA Class for the Aspect Details UI Block
This object does not need a creator.
- aspectDetailsBuilder() - Method in interface nxopen.ame.FragmentBuilder
-
Returns the fragment aspect details
License requirements: None.
- AspectNavigatorPreferencesBuilder - Interface in nxopen.ame
-
- AspectNode - Interface in nxopen.ame
-
Aspect Node Journaling class
This object does not need a creator.
- aspectOperator() - Method in interface nxopen.ame.EditClauseBuilder
-
Returns the query operator for Aspect object
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- aspectPlacement() - Method in interface nxopen.ame.BulkEngineeringObjectBuilder
-
Returns the aspect placement
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- aspectPlacement() - Method in interface nxopen.ame.InsertSettingsBuilder
-
Returns the aspect placement
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- AspectPrefixBuilder - Interface in nxopen.ame
-
- AspectPrefixBuilder.DelimiterType - Class in nxopen.ame
-
represents delimiter type
- aspectRatio - Variable in class nxopen.annotations.Lettering
-
Aspect ratio for a character
- aspectRatio() - Method in interface nxopen.cae.MeshControlBuilder
-
Returns the aspect ratio
License requirements: None.
- aspectRatio() - Method in interface nxopen.display.DecalBuilder
-
Returns the decal image aspect ratio
License requirements: None.
- aspectRatio() - Method in interface nxopen.display.IrayPlusSimpleMaterialEditorBuilder
-
Returns the aspect ratio
License requirements: studio_render ("UG STUDIO RENDER")
.
- aspectRatio - Variable in class nxopen.uf.UFDisp.TextureSpaceInfo
-
- aspectRatio - Variable in class nxopen.uf.UFDrf.DraftAidTextInfo
-
- aspectRatio - Variable in class nxopen.uf.UFDrf.Lettering
-
- aspectRatioLocked - Variable in class nxopen.uf.UFDrf.ImageData
-
- aspectRatioOption() - Method in interface nxopen.DxfdwgImporter
-
Returns the autocad aspect ratio calculation method - this will decide the NX Aspect ratio method to be used.
- AspectRoot - Interface in nxopen.ame
-
AspectRoot Node Journaling class
This object does not need a creator.
- aspects() - Method in interface nxopen.ame.PageBuilder
-
Returns the Page aspect details
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- aspectSelection() - Method in interface nxopen.ame.AncestorEvaluatorBuilder
-
Returns the aspect navigator selection type
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- aspectSelection() - Method in interface nxopen.ame.ChildrenEvaluatorBuilder
-
Returns the aspect navigator selection type
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- aspectSelection() - Method in interface nxopen.ame.ParentEvaluatorBuilder
-
Returns the aspect navigator selection type
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- aspectSelection() - Method in interface nxopen.ame.PlcSymbolsEvaluatorBuilder
-
Returns the aspect navigator selection type
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- ASSAIGNED_PRO - Static variable in class nxopen.tooldesigner.SelectDatumsBuilder.DatumCleanAPINames
-
- ASSAIGNED_STATION - Static variable in class nxopen.tooldesigner.SelectDatumsBuilder.DatumCleanAPINames
-
- assem() - Method in interface nxopen.UFSession
-
- ASSEM_BY_GAP_CONTACT - Static variable in class nxopen.uf.UFSf.AssemblyType
-
- ASSEM_BY_GLUE - Static variable in class nxopen.uf.UFSf.AssemblyType
-
- ASSEM_BY_SLIDE_CONTACT - Static variable in class nxopen.uf.UFSf.AssemblyType
-
- ASSEM_FREE - Static variable in class nxopen.uf.UFSf.AssemblyType
-
- assembleConnectionsImportedFromSubAssemblies() - Method in interface nxopen.routing.RouteManager
-
Copies the connections, connectors and devices from the design elements of
study to the part containing object_in_part and assembles them.
- assemblies() - Method in interface nxopen.BasePart
-
- ASSEMBLIES - Static variable in class nxopen.FileNewApplication
-
Deprecated.
Specifies an assemblies file new template
- ASSEMBLIES - Static variable in class nxopen.pdm.ConfigurationContextBuilder.ConfigContextMode
-
- assemblies() - Method in interface nxopen.preferences.SessionPreferences
-
Returns object for doing Asseblies preferences settings applicable to entire session .
- AssembliesChildRevisionOptions - Class in nxopen.assemblies
-
Child revision options
- AssembliesEventTypes - Class in nxopen.assemblies
-
NX Event types
- AssembliesGeneralPropertiesBuilder - Interface in nxopen.assemblies
-
- AssembliesGeneralPropertiesBuilder.HiddenOptions - Class in nxopen.assemblies
-
Options for managing the hidden property on the components
- AssembliesGeneralPropertiesBuilder.LayerOptions - Class in nxopen.assemblies
-
Layer options for the components
- AssembliesGeneralPropertiesBuilder.QuantityOptions - Class in nxopen.assemblies
-
Options for assigning the quantity on the components
- AssembliesGeneralPropertiesBuilder.ReferenceComponentOptions - Class in nxopen.assemblies
-
Options for setting the reference-only property on the components
- AssembliesParameterPropertiesBuilder - Interface in nxopen.assemblies
-
- AssembliesParameterPropertiesBuilder.ArrangementOptions - Class in nxopen.assemblies
-
The positioning mixture status options
- AssembliesUtils - Interface in nxopen
-
Contains various assembly utility methods
To obtain an instance of this class, refer to
Session
Created in NX6.0.0
- assembliesUtils() - Method in interface nxopen.Session
-
Returns the
AssembliesUtils
instance belonging to this session
Created in NX3.0.0
- assemblingGeom - Variable in class nxopen.uf.UFSf.AskMeshMatingConditionData
-
- Assembly - Interface in nxopen.assemblies
-
Assembly class
This is an abstract class, and cannot be instantiated.
- ASSEMBLY - Static variable in class nxopen.cam.SimulationOptionsBuilder.ToolShapeColl
-
use assembly tool shape
- ASSEMBLY - Static variable in class nxopen.cam.SimulationOptionsBuilder.ToolShapeMR
-
use assembly tool shape
- ASSEMBLY - Static variable in class nxopen.linedesigner.ConveyorStationFeatureBuilder.Type
-
- ASSEMBLY - Static variable in class nxopen.visualreporting.VisualReport.ReportContextOption
-
Collect objects from entire assembly
- ASSEMBLY_CONSTRAINTS - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide assembly constraints
- ASSEMBLY_CONSTRAINTS_DELAYED - Static variable in class nxopen.uf.UFWave.DelayStatus
-
- ASSEMBLY_CREATE_NEW_COMPONENT - Static variable in class nxopen.pdm.PartBuilder.Operation
-
Assembly->NXOpen.Assemblies.Component->Create New...
- ASSEMBLY_DIAGRAM - Static variable in class nxopen.pdm.PartBuilder.Operation
-
Assembly->Report->Assembly Diagram...
- ASSEMBLY_ONLY - Static variable in class nxopen.JtCreator.FileWrite
-
ASM_ONLY
- assemblyComponent() - Method in interface nxopen.features.shipdesign.ManufacturingPreparationBuilder
-
Returns the assembly part to add components to
License requirements: None.
- assemblyConstraintsDelay() - Method in interface nxopen.Update
-
Returns the state of the assembly constraints delay flag.
- assemblyCreationSettingsBuilder() - Method in interface nxopen.drafting.PreferencesBuilder
-
Returns the assembly creation from 2d component builder
License requirements: None.
- AssemblyCreationSettingsBuilder - Interface in nxopen.layout2d
-
- assemblyCrosshatching() - Method in interface nxopen.annotations.LightweightSectionBuilder
-
Returns the assembly crosshatch option
License requirements: None.
- assemblyCrosshatching() - Method in interface nxopen.annotations.PmiPreferences
-
Returns the flag indicating whether PMI support for lightweight section view assembly crosshatching option is available
License requirements: None.
- assemblyCrossHatching() - Method in interface nxopen.drawings.SectionViewStyle
-
Returns the status of assembly cross hatching.
- assemblyCrossHatching() - Method in interface nxopen.preferences.SectionViewPreferences
-
Returns the status of assembly cross hatching.
- AssemblyCut - Interface in nxopen.features
-
Represents an assembly cut feature.
- AssemblyCutBuilder - Interface in nxopen.features
-
- AssemblyDefinition - Interface in nxopen.routing
-
Represents a collection of
SingleDevice
objects that are used in an assembled product.
- AssemblyDeformPartData() - Constructor for class nxopen.uf.UFAssem.AssemblyDeformPartData
-
- AssemblyDeformPartData(boolean, boolean, Tag, int, Tag[], Tag[], int, Tag[], String[], Tag) - Constructor for class nxopen.uf.UFAssem.AssemblyDeformPartData
-
- AssemblyDrawingBuilder - Interface in nxopen.tooling
-
- AssemblyDrawingBuilder.AttributeNames - Class in nxopen.tooling
-
Specifies the attribute name
- AssemblyDrawingBuilder.AttributeValues - Class in nxopen.tooling
-
Specifies the attribute value.
- AssemblyDrawingBuilder.DrawingCreateOrEdit - Class in nxopen.tooling
-
Specifies the sheet operation.
- AssemblyDrawingBuilder.DrawingTypes - Class in nxopen.tooling
-
Specifies the drawing type.
- AssemblyDrawingBuilder.ModelViewToUseValue - Class in nxopen.tooling
-
Specifies the model view to use.
- AssemblyDrawingBuilder.Types - Class in nxopen.tooling
-
Specifies the filter of assembly.
- AssemblyDrawingBuilder.ViewOptionValue - Class in nxopen.tooling
-
Specifies the view options.
- AssemblyFromLayout2dBuilder - Interface in nxopen.layout2d
-
- AssemblyManager - Interface in nxopen.assemblies
-
Represents the Assembly Manager
To obtain an instance of this class, refer to
BasePart
Created in NX6.0.0
- assemblyManager() - Method in interface nxopen.BasePart
-
- assemblyMeshCnt - Variable in class nxopen.uf.UFSf.LocateMeshMatingConditionListData
-
- assemblyMeshes - Variable in class nxopen.uf.UFSf.AutoCreateMeshMatingConditionData
-
- assemblyMeshTags - Variable in class nxopen.uf.UFSf.LocateMeshMatingConditionListData
-
- assemblyName() - Method in interface nxopen.cae.connections.ComposerData
-
Returns the assembly name
License requirements: None.
- assemblyName - Variable in class nxopen.uf.UFSf.AskMeshMatingConditionData
-
- assemblyOptions() - Method in interface nxopen.features.shipdesign.UpdateShipLibraryBuilder
-
Returns the assembly scope options.
- assemblyPart() - Method in interface nxopen.features.shipdesign.ShipSectionBuilder
-
Returns the assembly part
License requirements: None.
- assemblyPart() - Method in interface nxopen.features.shipdesign.SteelDistributionBuilder
-
Returns the assembly part
License requirements: None.
- assemblyPart() - Method in interface nxopen.layout2d.AssemblyFromLayout2dBuilder
-
Returns the destination part for the Layout assembly
License requirements: None.
- assemblyTolerance() - Method in interface nxopen.drawings.ViewStyleSectionBuilder
-
Returns the assembly tolerance toggle on the SECTION tab of the View Style Dialog
License requirements: None.
- assemblyTolerance() - Method in interface nxopen.motion.LmsSolverProperty
-
Returns the assembly tolerance
License requirements: None.
- assemblyType - Variable in class nxopen.uf.UFSf.AskMeshMatingConditionData
-
- assertCompProps(Tag, UFWeight.Properties) - Method in interface nxopen.uf.UFWeight
-
- ASSERTED - Static variable in class nxopen.uf.UFWeight.StateType
-
- assertErrorCode(int) - Method in exception nxopen.NXException
-
Throws an exception if this NXException does not have the specified error code
- assertPartProps(Tag, UFWeight.Properties) - Method in interface nxopen.uf.UFWeight
-
- assign(BaseDataLoadingBuilder) - Method in interface nxopen.features.vehicledesign.BaseDataLoadingBuilder
-
Assigns value from another loading.
- assign(BaseDataPassengerBuilder) - Method in interface nxopen.features.vehicledesign.BaseDataPassengerBuilder
-
Assigns values from another passenger.
- assign() - Method in interface nxopen.PrintPDFBuilder
-
The Assign button will assign an appropriate name to the Dataset field if
Create New is chosen as the Action.
- assign(TaggedObject[]) - Method in interface nxopen.tooldesigner.AssignWeldsBuilder
-
Assign weld
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- assign(TaggedObject[]) - Method in interface nxopen.tooldesigner.SelectDatumsBuilder
-
The update after assigned
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- assign3DPortToLogicalPort(NXObject, Port) - Method in interface nxopen.mechanicalrouting.LogicalDesignService
-
Assigns a 3D
Port
mapping to a logical port object.
- ASSIGN_CLEARANCES - Static variable in class nxopen.tooling.ClearanceManagementBuilder.Type
-
- ASSIGN_CORNER - Static variable in class nxopen.routing.CustomManager.DesignRuleReason
-
Called after the Assign Corner command.
- ASSIGN_CORNER - Static variable in class nxopen.routing.DesignRuleViolationCollection.Reason
-
- ASSIGN_EOS - Static variable in class nxopen.ame.EditEngineeringObjectBuilder.SourceType
-
- ASSIGN_POUS - Static variable in class nxopen.ame.EditEngineeringObjectBuilder.SourceType
-
- ASSIGN_STOCK - Static variable in class nxopen.routing.CustomManager.CallbackReason
-
Called after the Assign Stock command.
- ASSIGN_STOCK - Static variable in class nxopen.routing.CustomManager.DesignRuleReason
-
Called after the Assign Stock command.
- ASSIGN_STOCK - Static variable in class nxopen.routing.DesignRuleViolationCollection.Reason
-
- assignAlternateId() - Method in interface nxopen.pdm.AlternateIdManager
-
This method generates alternate item and revision IDs and sets these generated
values on this manager class.
- AssignAlternateIdData() - Constructor for class nxopen.pdm.AlternateIdManager.AssignAlternateIdData
-
- assignAlternateIds(String, String) - Method in interface nxopen.pdm.AlternateIdManager
-
- assignAlternateIds() - Method in interface nxopen.pdm.PartOperationImportBuilder
-
Returns the method returns the value indicating whether alternate IDs should be created during import
License requirements: None.
- assignAlternatePartId(Tag, String, String) - Method in interface nxopen.uf.UFUgmgr
-
- AssignAlternatePartIdData() - Constructor for class nxopen.uf.UFUgmgr.AssignAlternatePartIdData
-
- AssignAlternateRevData() - Constructor for class nxopen.pdm.AlternateIdManager.AssignAlternateRevData
-
- AssignAlternateRevData(String, boolean) - Constructor for class nxopen.pdm.AlternateIdManager.AssignAlternateRevData
-
Constructor for the AssignAlternateRevData object.
- assignAlternateRevId() - Method in interface nxopen.pdm.AlternateIdManager
-
This method generates an alternate rev ID and sets this generated value on
this manager class.
- assignAlternateRevision() - Method in interface nxopen.pdm.AlternateIdManager
-
Generates the alternate Revision ID information.
- assignAngleExpression(String) - Method in interface nxopen.cae.LaminatePly
-
Assigns a value to the ply angle expression
License requirements: nx_lam_composites ("Laminate Composites")
.
- AssignAspectBuilder - Interface in nxopen.ame
-
- assignAttr(NXObject[], String, String) - Method in interface nxopen.tooling.AssemblyDrawingBuilder
-
Assign attribute
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- assignAttribute(TaggedObject, String, String, String, int, String) - Method in interface nxopen.features.shipdesign.QualifySketchBuilder
-
Assigns attributes to the anchor point.
- assignAttributeForSketchFeature(NXObject) - Method in interface nxopen.tooling.SpecialFormingBuilder
-
Assign attribute for sketch feature.
- assignAttributeToObject(NXObject, String, String) - Method in interface nxopen.tooling.FaceColorManagementBuilder
-
Assign attribute to object
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- assignBooleanValues(boolean[]) - Method in interface nxopen.cae.PostScenarioConfigurationVariable
-
Bind values to this Selection Variable.
- assignBooleanValues(boolean[]) - Method in interface nxopen.cae.PostScenarioVariable
-
Assign boolean values to this Selection Variable.
- assignCallParameterToParameter(int, int, int, NXObject) - Method in interface nxopen.ame.PlcMethodBuilder
-
Assign parameter to operand
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- assignClearance() - Method in interface nxopen.tooling.SpecialFormingBuilder
-
Assign clearance.
- assignColor() - Method in interface nxopen.cam.FeatureRecognitionBuilder
-
Returns the flag indicating whether features will get a color assigned if their faces have a unique color that is different from the body color
License requirements: None.
- assignColor() - Method in interface nxopen.tooling.ScrapDesignBuilder
-
Returns the color for assigned scrap
License requirements: None.
- assignColorToObject(NXObject, int) - Method in interface nxopen.tooling.FaceColorManagementBuilder
-
Assign color to object
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- assignComplexValues(Complex[]) - Method in interface nxopen.cae.PostScenarioConfigurationVariable
-
Bind values to this Selection Variable.
- assignComplexValues(Complex[]) - Method in interface nxopen.cae.PostScenarioVariable
-
Assign complex values to this Selection Variable.
- assignComponentsToLogicalConnection(Component[], NXObject) - Method in interface nxopen.mechanicalrouting.LogicalDesignService
-
Assigns a list of
Component
mapping to a logical connection object.
- assignComponentToLogicalEquipment(NXObject, Component) - Method in interface nxopen.mechanicalrouting.LogicalDesignService
-
Assigns a component
Component
to a logical equipment object.
- assignCopeCorner(ControlPoint, Stock[]) - Method in interface nxopen.routing.CopeCornerCollection
-
Assigns a cope corner to the given control point.
- assignCopyDsetName(String, String, String, String, String, String, String) - Method in interface nxopen.uf.UFUgmgr
-
- AssignCopyDsetNameData() - Constructor for class nxopen.uf.UFUgmgr.AssignCopyDsetNameData
-
- assignCorner(ControlPoint) - Method in interface nxopen.routing.MiterCornerCollection
-
Assigns a new miter corner to the given control point.
- AssignCornerBuilder - Interface in nxopen.mechanicalrouting
-
- AssignCornerBuilder - Interface in nxopen.routing
-
- AssignCornerBuilder.CornerType - Class in nxopen.mechanicalrouting
-
- assignCornerByBendRadius(ControlPoint, double) - Method in interface nxopen.routing.BendCornerCollection
-
This routine assigns a new bend corner to the given input bend corner object using
bend radius.
- assignCornerByBendRatio(ControlPoint, double) - Method in interface nxopen.routing.BendCornerCollection
-
This routine assigns a new bend corner to the given input bend corner object using
bend ratio.
- assignCornerByBendTable(ControlPoint, String) - Method in interface nxopen.routing.BendCornerCollection
-
This routine assigns a bend corner to the given input RCP object using
a bend table entry.
- assignDefaultCorner() - Method in interface nxopen.routing.LinearPathSettings
-
Returns the preference to assign the current default corner to new segments.
- assignDefaultElbow() - Method in interface nxopen.routing.ControlPoint
-
Places the default elbow at this object.
- assignDefaultElbow() - Method in interface nxopen.routing.LinearPathSettings
-
Returns the preference to find and assign a default elbow to new segments.
- AssignDiscontinuityBuilder - Interface in nxopen.routing
-
- AssignDiscontinuityBuilder.Types - Class in nxopen.routing
-
the Enum for the types Block
- assignDoubleValues(double[]) - Method in interface nxopen.cae.PostScenarioConfigurationVariable
-
Bind values to this Selection Variable.
- assignDoubleValues(double[]) - Method in interface nxopen.cae.PostScenarioVariable
-
Assign double values to this Selection Variable.
- ASSIGNED - Static variable in class nxopen.LineWidthOption
-
Width value can be obtained from the builder.
- assignedFormula() - Method in interface nxopen.mechatronics.AdapterSignalBuilder
-
Returns the assigned formula.
- assignedFormula - Variable in class nxopen.mechatronics.SignalAdapterBuilder.ParameterData
-
Assigned Formula
- assignedFormula - Variable in class nxopen.mechatronics.SignalAdapterBuilder.SignalData
-
Assigned Formula
- assignedUser() - Method in interface nxopen.issue.IssueContent
-
Returns the assigned user
License requirements: nx_issue_mgmt ("NX Issue Tracking")
.
- assignedUser() - Method in interface nxopen.issue.IssueContentBuilder
-
Returns the assigned user
License requirements: nx_issue_mgmt ("NX Issue Tracking")
.
- assignEjectorType() - Method in interface nxopen.tooling.EjectorTableBuilder
-
Assigns the specified type on ejector pins.
- assignExtension(int, Direction, Expression, Expression) - Method in interface nxopen.routing.SplinePathBuilder
-
Assigns an extension to the point at pointIndex.
- assignExtension(int, Direction, Expression, Expression, boolean) - Method in interface nxopen.routing.SplinePathBuilder
-
Assigns an extension to the point at pointIndex.
- assignFile(int, String) - Method in interface nxopen.sim.NcChannelSelectionData
-
Assign a file to a channel using the channel number.
- assignFile(String, String) - Method in interface nxopen.sim.NcChannelSelectionData
-
Assign a file to a channel using the channel name.
- assignHealPathExtension(int, Direction, Expression, Expression) - Method in interface nxopen.routing.SplinePathBuilder
-
Assigns an extension to the point at pointIndex for Heal Path.
- assignId() - Method in interface nxopen.linedesigner.PlantProductionUnitCreatorBuilder
-
The assign ID of production unit
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- assignId() - Method in interface nxopen.linedesigner.ProductionUnitCreatorBuilder
-
The assign ID of production unit
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- assignIntegerValues(int[]) - Method in interface nxopen.cae.PostScenarioConfigurationVariable
-
Bind values to this Selection Variable.
- assignIntegerValues(int[]) - Method in interface nxopen.cae.PostScenarioVariable
-
Assign integer values to this Selection Variable.
- assignItemNumber() - Method in interface nxopen.features.vehicledesign.BaseDataImportExportBuilder
-
Used to assign Item number and revision in Teamcenter .
- AssignItemNumberData() - Constructor for class nxopen.features.vehicledesign.BaseDataImportExportBuilder.AssignItemNumberData
-
- assignItemRevision(String) - Method in interface nxopen.features.vehicledesign.BaseDataImportExportBuilder
-
Used to assign Item revision in Teamcenter.
- AssignItemRevisionData() - Constructor for class nxopen.features.vehicledesign.BaseDataImportExportBuilder.AssignItemRevisionData
-
- assignMaterial(Tag, Tag) - Method in interface nxopen.uf.UFDisp
-
- AssignmentPort - Interface in nxopen.ame
-
Represents AssignmentPort
Use the static method in this class to obtain an instance.
- assignmentStates - Variable in class nxopen.pdm.PartOperationImportBuilder.DefaultProjectInformationData
-
assignment states
- assignNewDsetName(String, String, String, String, String) - Method in interface nxopen.uf.UFUgmgr
-
- AssignNewDsetNameData() - Constructor for class nxopen.uf.UFUgmgr.AssignNewDsetNameData
-
- assignNewType(Part[], String) - Method in interface nxopen.ame.ManageObjectTypeBuilder
-
Assigns AD Type to input parts
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- AssignNodalCSBuilder - Interface in nxopen.cae
-
- AssignNodalCSBuilder.Cs - Class in nxopen.cae
-
Assign CS options
- AssignNodalCSBuilder.CSType - Class in nxopen.cae
-
the CS types
- AssignNodalCSBuilder.GeometryOption - Class in nxopen.cae
-
the geometry options
- assignObjects(NXObject[]) - Method in interface nxopen.PhysicalMaterial
-
Assigns the material to solid bodies
License requirements: None.
- assignOperandToParameter(int, int, int, NXObject) - Method in interface nxopen.ame.PlcMethodBuilder
-
Assign parameter to operand
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- assignOverrideMaterial(TrueShadingBuilder.MaterialType) - Method in interface nxopen.display.TrueShadingBuilder
-
Assigns an overriding material type to one or more selected objects
License requirements: None.
- assignParent(String, NXObject) - Method in interface nxopen.ame.EngineeringObjectAspectDetailBuilder
-
Sets a parent aspect
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- assignPartFileName(String) - Method in interface nxopen.pdm.PartBuilder
-
This method generates a part file name given an input part file type and
assigns this part file name to the builder.
- assignPartFileName(String, String, String, String) - Method in interface nxopen.pdm.PartBuilder
-
This method generates a part file name and assigns this part
file name to the builder.
- assignPartNumber(String) - Method in interface nxopen.pdm.PartBuilder
-
This method generates a part number given an input part type and
assigns this part number to the builder.
- assignPartNumber(String, String) - Method in interface nxopen.pdm.PartBuilder
-
This method generates a part number given an input part type and
sets this part number to the builder.
- assignPartNumber(String, String) - Method in interface nxopen.uf.UFUgmgr
-
- AssignPartNumberData() - Constructor for class nxopen.uf.UFUgmgr.AssignPartNumberData
-
- assignPartRev(String, String) - Method in interface nxopen.uf.UFUgmgr
-
- AssignPartRevData() - Constructor for class nxopen.uf.UFUgmgr.AssignPartRevData
-
- assignPartRevision() - Method in interface nxopen.pdm.PartBuilder
-
This method generates a part revision and assigns this part revision
to the builder.
- assignPartRevision(int) - Method in interface nxopen.pdm.PartBuilder
-
This method generates a part revision and sets this part revision to the builder.
- AssignPatchBuilder - Interface in nxopen.tooling
-
Represents a builder to be used to add sheet bodies as patch surfaces or delete patch surfaces.
- AssignPatchBuilder.ConvertTypeOption - Class in nxopen.tooling
-
The option to convert to have copies or no copies for all selected sheets.
- AssignPatchBuilder.PatchColorData - Class in nxopen.tooling
-
- AssignPatchBuilder.Types - Class in nxopen.tooling
-
The types for assigning sheets.
- AssignPatchCollection - Interface in nxopen.tooling
-
Represents a collection of AssignPatch builder
To obtain an instance of this class, refer to
ToolingManager
Created in NX6.0.0
- assignPatchs() - Method in interface nxopen.tooling.ToolingManager
-
Returns the AssignPatchCollection instance belonging to this part .
- assignPath(Connection.RouteLevel, Path) - Method in interface nxopen.routing.electrical.Connection
-
Assigns the given path to this connection and routes the connection on the path using the given routing level.
- AssignPathBuilder - Interface in nxopen.routing
-
- assignPermanentName(String) - Method in interface nxopen.BasePart
-
Saves a temporary part with the given name.
- assignPermanentName(String) - Method in interface nxopen.pdm.PdmPart
-
Assign a permanent name to the temporary part
License requirements: None.
- assignPoint(int, Point) - Method in interface nxopen.motion.SplineBeamBuilder
-
Assigns a point
License requirements: mechanisms ("MECHANISMS")
.
- AssignProxyBuilder - Interface in nxopen.routing.electrical
-
- assignRemoveProjects(SmartSaveObject[], String[], Session.ProjectAssignmentState[]) - Method in interface nxopen.pdm.SmartSaveBuilder
-
Assign or remove projects to/from objects
License requirements: None.
- assignRemoveProjects(String[], Session.ProjectAssignmentObjectType[], String[], Session.ProjectAssignmentState[]) - Method in interface nxopen.Session
-
Assign or remove projects to/from objects
License requirements: None.
- assignRemoveProjectsBasedOnPartOccs(TaggedObject[], Session.ProjectAssignmentObjectType[], String[], Session.ProjectAssignmentState[]) - Method in interface nxopen.Session
-
Assign or remove projects to/from CPD objects
License requirements: None.
- assignStock(ElectricalStockDevice[], ElectricalStockDevice.RouteTypes) - Method in interface nxopen.routing.electrical.ElectricalStockDeviceCollection
-
Assign
Stock
to input stock devices.
- assignStock(ISegment[]) - Method in interface nxopen.routing.PathStockBuilder
-
Assigns stock using the method defined by this stock builder object.
- assignStock(Tag, Tag, Tag, int, Tag[]) - Method in interface nxopen.uf.UFRoute
-
- assignStockMethod() - Method in interface nxopen.mechanicalrouting.PathStockPreferenceBuilder
-
- assignStockMethod() - Method in interface nxopen.routing.PathStockBuilder
-
Returns the method to determine which stock to assign.
- assignStockStyle(int, int, Tag[]) - Method in interface nxopen.uf.UFRoute
-
- assignStringValues(String[]) - Method in interface nxopen.cae.PostScenarioConfigurationVariable
-
Bind values to this Selection Variable.
- assignStringValues(String[]) - Method in interface nxopen.cae.PostScenarioVariable
-
Assign string values to this Selection Variable.
- AssignSubnetBuilder - Interface in nxopen.ame
-
- assignTangency(Curve[], AssignTangencyBuilder.TangencySide) - Method in interface nxopen.routing.AssignTangencyBuilder
-
Assign tangency at specified side of the spline.
- assignTangencyAtPort(AssignTangencyBuilder.TangencySide) - Method in interface nxopen.routing.AssignTangencyBuilder
-
Assign tangency at attached port.
- AssignTangencyBuilder - Interface in nxopen.routing
-
- AssignTangencyBuilder.TangencySide - Class in nxopen.routing
-
Describes which side of the spline to assign tangency.
- assignTangencySide() - Method in interface nxopen.routing.AssignTangencyBuilder
-
- assignTangentExtensionForPointAtIndex(int, Expression, Expression) - Method in interface nxopen.routing.SplinePathBuilder
-
Assigns the extension direction and expressions tangent to the spline path at the given
point index.
- AssignTangentExtensionForPointAtIndexData() - Constructor for class nxopen.routing.SplinePathBuilder.AssignTangentExtensionForPointAtIndexData
-
- assignTargets(TaggedObject[]) - Method in interface nxopen.geometricutilities.BooleanRegionSelect
-
Assigns the targets to be used for region selection
License requirements: solid_modeling ("SOLIDS MODELING")
.
- AssignTemplateToProductBuilder - Interface in nxopen.ame
-
- assignThicknessExpression(String) - Method in interface nxopen.cae.LaminatePly
-
Assigns a value to the ply thickness expression
License requirements: nx_lam_composites ("Laminate Composites")
.
- assignToAllBodies() - Method in interface nxopen.PhysicalMaterial
-
Assigns the material to all solid bodies
License requirements: None.
- assignToBodiesNotUsingPreferredMaterial() - Method in interface nxopen.PhysicalMaterial
-
Assigns the material to all solid bodies not using the preferred material.
- assignToBodiesWithoutMaterials() - Method in interface nxopen.PhysicalMaterial
-
Assigns the material to all solid bodies without a material already assigned.
- assignTraverseLoopBuilder(TraverseLoopBuilder) - Method in interface nxopen.tooling.MWTraversePartingLinesBuilder
-
Assign the traverse loop builder
License requirements: None.
- AssignTypeBuilder - Interface in nxopen.ame
-
- assignUnicodeStringValues(String[]) - Method in interface nxopen.cae.PostScenarioConfigurationVariable
-
Bind values to this Selection Variable.
- assignUnicodeStringValues(String[]) - Method in interface nxopen.cae.PostScenarioVariable
-
Assign unicode string values to this Selection Variable.
- assignValues(PostScenarioVariant[]) - Method in interface nxopen.cae.PostScenarioConfigurationVariable
-
Bind values to this Selection Variable.
- assignValues(PostScenarioVariant[]) - Method in interface nxopen.cae.PostScenarioVariable
-
Assign variant values to this Selection Variable.
- assignWeld(ModelElementRevision) - Method in interface nxopen.tooldesigner.SelectWeldsBuilder
-
Do Weld Assignment
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- assignWeldPMI() - Method in interface nxopen.weld.FilletBuilder
-
Returns the toggle to assign weld pmi.
- assignWeldPMI() - Method in interface nxopen.weld.PlugSlotBuilder
-
Returns the assign weld pmi
License requirements: None.
- assignWeldPMI() - Method in interface nxopen.weld.UserDefinedWeldBuilder
-
Returns the assign weld pmi.
- assignWeldPMI() - Method in interface nxopen.weld.WeldGrooveBuilder
-
Returns a value indicating whether the assign weld pmi is true
License requirements: ugweld ("UG WELD")
.
- AssignWeldsBuilder - Interface in nxopen.tooldesigner
-
AssignWeldsBuilder
To create a new instance of this class, use nxopen.ToolDesigner.ToolDesignerManager#createAssignWeldsBuilder
Created in NX11.0.0
- AssignWeldsBuilder.Menu - Class in nxopen.tooldesigner
-
Represents the weld's objects types
- ASSO_ARC - Static variable in class nxopen.uf.UFCurve.LineArcType
-
- ASSO_ARC_FROM_CENTER - Static variable in class nxopen.uf.UFCurve.AssoArcSubtype
-
- ASSO_LINE - Static variable in class nxopen.uf.UFCurve.LineArcType
-
- ASSO_NONE - Static variable in class nxopen.uf.UFCurve.LineArcType
-
- assoAngle() - Method in interface nxopen.cae.NodeAssociationBuilder
-
Returns the association angle
License requirements: None.
- ASSOC_FILE_DIR_CONVERT - Static variable in class nxopen.uf.UFClone.ConvertCb
-
- ASSOC_LINE_TYPE_MAX - Static variable in class nxopen.uf.UFDrf.AssocLineType
-
- ASSOC_LINE_TYPE_NONE - Static variable in class nxopen.uf.UFDrf.AssocLineType
-
- ASSOC_OFFSET - Static variable in class nxopen.Sketch.ConstraintType
-
Limited support
- ASSOC_OFFSET - Static variable in class nxopen.uf.UFSket.ConType
-
- ASSOC_TRIM - Static variable in class nxopen.Sketch.ConstraintType
-
Limited support
- ASSOC_TRIM - Static variable in class nxopen.uf.UFSket.ConType
-
- ASSOC_TYPE_MAXIMUM - Static variable in class nxopen.uf.UFDrf.AssocType
-
- ASSOC_TYPE_NONE - Static variable in class nxopen.uf.UFDrf.AssocType
-
- ASSOC_TYPE_NONE - Static variable in class nxopen.uf.UFSket.AssocType
-
- assocCurves - Variable in class nxopen.uf.UFSmd.EvalTrimAnglesData
-
- assocDwgPos - Variable in class nxopen.uf.UFDrf.Object
-
- assocFaces - Variable in class nxopen.uf.UFSmd.EvalTrimAnglesData
-
- assocHighlightColor() - Method in interface nxopen.preferences.SessionPmi
-
Returns the associated highlight color
License requirements: None.
- associate() - Method in interface nxopen.cae.ConvertToConvergentBodyBuilder
-
Returns a value indicating whether to associate the convergent body to the polygon body or not
License requirements: None.
- ASSOCIATE - Static variable in class nxopen.features.shipdesign.PenetrationRequestBuilder.RequestDialogType
-
- associate - Variable in class nxopen.uf.UFCurve.SectionGeneralData
-
- ASSOCIATED_CONTAINER - Static variable in class nxopen.cae.ftk.DataManager.FileContainerType
-
Part associated container which has the same simple name with the part
- ASSOCIATED_EQUIPMENT - Static variable in class nxopen.routing.DeviceRelationship.RelationType
-
the related single devices are attached to the relating single device
- AssociateDatumsUnitDesignsBuilder - Interface in nxopen.tooldesigner
-
AssociateDatumsUnitDesignsBuilder
To create a new instance of this class, use nxopen.ToolDesigner.ToolDesignerManager#createAssociateDatumsUnitDesignsBuilder
Default values.
- AssociateDatumsUnitDesignsBuilder.Type - Class in nxopen.tooldesigner
-
SEARCH TYPES Names
- associatedBody() - Method in interface nxopen.facet.FacetedBody
-
Returns
the solid body associated with this facet body.
- associatedCadPart() - Method in interface nxopen.cae.FemPart
-
Returns the cad part associated with the fem part.
- associatedCurve() - Method in interface nxopen.mechatronics.PathConstraintFrameBuilder
-
Returns the associated curve.
- associatedDatums - Variable in class nxopen.uf.UFGdt.AskAssociatedDatumsData
-
- associatedDimension() - Method in interface nxopen.SketchDimensionalConstraint
-
Returns the dimension associated with the dimensional constraint
License requirements: None.
- associatedExpression() - Method in interface nxopen.SketchDimensionalConstraint
-
Returns the expression associated with the dimensional constraint
License requirements: None.
- associatedfacetedbodies - Variable in class nxopen.facet.FacetedBodyCollection.AssociatedFacetedBodiesData
-
Array of loaded associated faceted bodies
- AssociatedFacetedBodiesData() - Constructor for class nxopen.facet.FacetedBodyCollection.AssociatedFacetedBodiesData
-
- associatedFilesRootDirectory() - Method in interface nxopen.pdm.PartOperationImportBuilder
-
Returns the associated files root directory
License requirements: None.
- AssociateDimensionBuilder - Interface in nxopen.annotations
-
- AssociatedObject - Interface in nxopen.annotations
-
Represents the objects to which the PMI applies.
- associatedObject() - Method in interface nxopen.userdefinedobjects.UserDefinedLinkEvent
-
Returns the associated object.
- associatedObject - Variable in class nxopen.userdefinedobjects.UserDefinedObject.LinkDefinition
-
linked object
- associatedObjects() - Method in interface nxopen.annotations.PmiAngularDimensionBuilder
-
Returns the associated objects
License requirements: None.
- associatedObjects() - Method in interface nxopen.annotations.PmiAttributeBuilder
-
- associatedObjects() - Method in interface nxopen.annotations.PmiBoltCircleCenterlineBuilder
-
Returns the associated objects for the center mark
License requirements: None.
- associatedObjects() - Method in interface nxopen.annotations.PmiCenterline3dBuilder
-
Returns the associated objects for the 3D Centerline
License requirements: None.
- associatedObjects() - Method in interface nxopen.annotations.PmiCenterMarkBuilder
-
Returns the associated objects for the center mark
License requirements: None.
- associatedObjects() - Method in interface nxopen.annotations.PmiChamferDimensionBuilder
-
Returns the associated objects
License requirements: None.
- associatedObjects() - Method in interface nxopen.annotations.PmiCurveLengthDimensionBuilder
-
Returns the associated objects
License requirements: None.
- associatedObjects() - Method in interface nxopen.annotations.PmiCustomSymbolBuilder
-
Returns the select associated objects
License requirements: None.
- associatedObjects() - Method in interface nxopen.annotations.PmiDatumFeatureSymbolBuilder
-
Returns the datum feature associated object
License requirements: None.
- associatedObjects() - Method in interface nxopen.annotations.PmiDatumTargetBuilder
-
Returns the associated objects
License requirements: None.
- associatedObjects() - Method in interface nxopen.annotations.PmiFeatureControlFrameBuilder
-
Returns the associated objects builder for the annotation
License requirements: None.
- associatedObjects() - Method in interface nxopen.annotations.PmiLinearDimensionBuilder
-
Returns the associated objects
License requirements: None.
- associatedObjects() - Method in interface nxopen.annotations.PmiLineWeldBuilder
-
- associatedObjects() - Method in interface nxopen.annotations.PmiNoteBuilder
-
- associatedObjects() - Method in interface nxopen.annotations.PmiOrdinateDimensionBuilder
-
Returns the associated objects
License requirements: None.
- associatedObjects() - Method in interface nxopen.annotations.PmiRadialDimensionBuilder
-
Returns the associated objects
License requirements: None.
- associatedObjects() - Method in interface nxopen.annotations.PmiRapidDimensionBuilder
-
Returns the associated objects
License requirements: None.
- associatedObjects() - Method in interface nxopen.annotations.PmiTableBuilder
-
- associatedObjects() - Method in interface nxopen.annotations.PmiThicknessDimensionBuilder
-
Returns the associated objects
License requirements: None.
- associatedObjects() - Method in interface nxopen.cae.CaeNoteBuilder
-
Returns the associated objects for the annotation
License requirements: None.
- associatedObjects() - Method in interface nxopen.die.PierceTaskBuilder
-
Returns the assoc objects
License requirements: die_engineering ("DIE ENGINEERING")
.
- associatedObjects() - Method in interface nxopen.features.GlobalShapingBuilder
-
Returns the objects to transform with the deformation
License requirements: None.
- AssociatedObjectsBuilder - Interface in nxopen.annotations
-
The associated objects builder is used to store objects which annotations are associated to .
- associatedObjectsSets() - Method in interface nxopen.annotations.PmiAngularDimensionBuilder
-
Returns the associated objects sets
License requirements: None.
- associatedObjectsSets() - Method in interface nxopen.annotations.PmiLinearDimensionBuilder
-
Returns the associated objects sets
License requirements: None.
- AssociatedObjectsSetsBuilder - Interface in nxopen.annotations
-
The associated objects sets builder is used to store lists of objects which annotations are associated to .
- associatedPoint - Variable in class nxopen.annotations.Annotation.AssociativeOriginData
-
Origin location of annotation.
- associatedPoint - Variable in class nxopen.uf.UFDrf.AssociativeOrigin
-
- associatedPortName() - Method in interface nxopen.motion.InputPortAssociation
-
Returns the created and associated port name
License requirements: mechanisms ("MECHANISMS")
.
- associatedPortName() - Method in interface nxopen.motion.OutputPortAssociation
-
Returns the created and associated port name
License requirements: mechanisms ("MECHANISMS")
.
- associatedPortName() - Method in interface nxopen.motion.PortVariable
-
Returns the associated port name
License requirements: mechanisms ("MECHANISMS")
.
- associatedUdo - Variable in class nxopen.userdefinedobjects.UserDefinedObjectManager.LinkedUdoDefinition
-
- associatedView - Variable in class nxopen.annotations.Annotation.AssociativeOriginData
-
The member view in which the absolute model
point lies.
- associatedView - Variable in class nxopen.uf.UFDrf.AssociativeOrigin
-
- associateItem(SystemObject.RelationType, String, String) - Method in interface nxopen.mechatronics.SystemObject
-
Associate a specified item to this system object.
- AssociateItemData() - Constructor for class nxopen.mechatronics.SystemObject.AssociateItemData
-
- associateRequests(PenetrationRequest[]) - Method in interface nxopen.features.shipdesign.PenetrationUtils
-
Ask the associate requests
License requirements: nx_penetration_mgmt ("Penetration Management")
.
- associateToSketch() - Method in interface nxopen.drawings.SketchSectionLineBuilder
-
Returns the associate to sketch
License requirements: None.
- ASSOCIATION - Static variable in class nxopen.tooling.PiercingInsertBuilder.Types
-
the association type
- associationSetting() - Method in interface nxopen.tooling.PocketBuilder
-
Returns the association setting access functions
License requirements: None.
- associationTolerance() - Method in interface nxopen.cae.AutomaticMorphBuilder
-
Returns the option to tune geomtery association tolerance.
- associationTool() - Method in interface nxopen.tooling.PiercingInsertBuilder
-
Returns the association tool type.
- associationTool() - Method in interface nxopen.tooling.PiercingInsertMiniToolsBuilder
-
Returns the association tool type.
- AssociationUtilities - Interface in nxopen.cae
-
- AssociationUtilities.PrintInfoType - Class in nxopen.cae
-
The print info type
- associationUtils() - Method in interface nxopen.cae.CaeSession
-
- associative() - Method in interface nxopen.assemblies.ComponentPatternBuilder
-
Returns the option to specify whether the
ComponentPattern
is
associative or not.
- associative() - Method in interface nxopen.die.AddSurfBuilder
-
Returns the flag that indicates during creation if a feature is to be created or just the sheet body,
true indicates a feature will be created.
- associative() - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
Returns the associative switch.
- associative() - Method in interface nxopen.display.BoundedGridBuilder
-
Returns the associative
License requirements: None.
- associative() - Method in interface nxopen.drawings.AssociativeAngleBuilder
-
Returns the associative flag
License requirements: None.
- associative() - Method in interface nxopen.drawings.DetailViewBuilder
-
Returns the associative toggle
If view is associative and set associative to false, the view will be converted
to independent detail view.
- associative() - Method in interface nxopen.drawings.HingeLineBuilder
-
Returns the infer associative setting
License requirements: None.
- associative() - Method in interface nxopen.drawings.ViewPlacementBuilder
-
Returns the flag used to create a persistent alignment
License requirements: drafting ("DRAFTING")
.
- associative() - Method in interface nxopen.facet.FacetBodyFromBodyBuilder
-
Returns the option that specifies whether the facet body from body operation is associative
License requirements: None.
- associative() - Method in interface nxopen.features.AssociativeArcBuilder
-
Returns the associative
License requirements: None.
- associative() - Method in interface nxopen.features.AssociativeLineBuilder
-
Returns the associative
License requirements: None.
- associative() - Method in interface nxopen.features.BodyByEquationBuilder
-
Returns the option to identify if the feature should associatively update.
- associative() - Method in interface nxopen.features.CircularBlendCurveBuilder
-
Returns whether to create the associative output or non associative output
License requirements: None.
- associative() - Method in interface nxopen.features.CompositeCurveBuilder
-
Returns the associative
License requirements: None.
- associative() - Method in interface nxopen.features.CopyPasteBuilder
-
Returns the associative toggle
License requirements: None.
- associative() - Method in interface nxopen.features.ExtractFaceBuilder
-
Returns the option that specifies whether the extract face operation is associative
License requirements: None.
- associative() - Method in interface nxopen.features.GeomcopyBuilder
-
Returns the associative, a logical flag to indicate if the copies are associative.
- associative() - Method in interface nxopen.features.IntersectionCurveBuilder
-
Returns the associative
License requirements: None.
- associative() - Method in interface nxopen.features.IsoparametricCurvesBuilder
-
Returns the associative state.
- associative() - Method in interface nxopen.features.MathIntegrationBuilder
-
Returns the associativity of the expression in the feature to the Symbolica or Maple worksheet
License requirements: None.
- associative() - Method in interface nxopen.features.MirrorBodyBuilder
-
Returns the associative
License requirements: None.
- associative() - Method in interface nxopen.features.MoveObjectBuilder
-
Returns the associative flag.
- associative() - Method in interface nxopen.features.Offset3DCurveBuilder
-
Returns the flag for creating associative or non-associative feature.
- associative() - Method in interface nxopen.features.PointSetBuilder
-
Returns the associative setting. true indicates a feature will be created,
false indicates just points will be created
License requirements: None.
- associative() - Method in interface nxopen.features.PromotionBuilder
-
Returns the flag denoting the associative state of the Promotion feature
License requirements: None.
- associative() - Method in interface nxopen.features.SectionCurveBuilder
-
Returns the associativity
License requirements: None.
- associative() - Method in interface nxopen.features.sheetmetal.FlatPatternBuilder
-
Returns the setting which decides whether the flattened solid will be associative to parent body.
- associative() - Method in interface nxopen.features.sheetmetal.FlatSolidBuilder
-
Returns the setting which decides whether the flattened solid will be associative to parent body.
- associative() - Method in interface nxopen.features.shipdesign.ShellExpansionBuilder
-
Returns a flag that determines if output is associative (only used during creation).
- associative() - Method in interface nxopen.features.shipdesign.TraceLinesBuilder
-
Returns the associative
License requirements: None.
- associative() - Method in interface nxopen.features.SpineCurveBuilder
-
Returns the flag indicating if an associative Spine Curve (Feature) should be created.
- associative() - Method in interface nxopen.features.StudioSplineBuilder
-
- associative() - Method in interface nxopen.features.UntrimBuilder
-
Returns the option indicates to create associative untrim feature or unparameterized feature
License requirements: None.
- associative() - Method in interface nxopen.features.VirtualCurveBuilder
-
Returns the associative
License requirements: None.
- associative() - Method in interface nxopen.features.WaveDatumBuilder
-
Returns the associative
License requirements: None.
- associative() - Method in interface nxopen.features.WaveInterfaceLinkerBuilder
-
Returns the associative
License requirements: None.
- associative() - Method in interface nxopen.features.WaveLinkBuilder
-
Returns the associative
License requirements: None.
- associative() - Method in interface nxopen.features.WavePointBuilder
-
Returns the associative
License requirements: None.
- associative() - Method in interface nxopen.features.WaveRoutingBuilder
-
Returns the associative
License requirements: None.
- associative() - Method in interface nxopen.features.WaveSketchBuilder
-
Returns the associative
License requirements: None.
- associative() - Method in interface nxopen.features.WrapBuilder
-
Returns the flag that indicates during creation if a feature is to be created or just the curves,
true indicates a feature will be created.
- associative() - Method in interface nxopen.features.WrapGeometryBuilder
-
Returns the Remove parms switch
License requirements: None.
- associative() - Method in interface nxopen.geometricutilities.CurveOptions
-
Returns the associativity option
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- associative() - Method in interface nxopen.mechatronics.AnimationConversionBuilder
-
Returns the associative.
- ASSOCIATIVE - Static variable in class nxopen.preferences.GeneralExtractedEdgesOption
-
Associative
- associative() - Method in interface nxopen.sim.SinumerikCaSimplifyBodiesBuilder
-
Returns the Remove parms switch
License requirements: None.
- associative() - Method in interface nxopen.SketchIntersectionCurveBuilder
-
Returns the associative option
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- associative() - Method in interface nxopen.SketchIntersectionPointBuilder
-
Returns the associative option
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- associative() - Method in interface nxopen.tooling.ReusableObjectPasteBuilder
-
Returns the option specifying whether to associate the csys of reuse object to target entity
License requirements: None.
- associative() - Method in interface nxopen.tooling.StockSizeBuilder
-
Returns the association of stock size object
License requirements: None.
- associative() - Method in interface nxopen.weld.FilletBuilder
-
Returns the value identify if WAVE links should remain unbroken.
- ASSOCIATIVE - Static variable in class nxopen.weld.OutputType
-
output data will be associated to inputs.
- associative() - Method in interface nxopen.weld.TransformBuilder
-
Returns the indication to create associative feature
License requirements: None.
- ASSOCIATIVE - Static variable in class nxopen.weld.WeldBeadBuilder.OutputTypes
-
Bead follows normal update behaviour.
- associativeAlignment() - Method in interface nxopen.drawings.MultipleViewPlacementBuilder
-
Returns the associative alignment toggle
License requirements: drafting ("DRAFTING")
.
- associativeAlignment() - Method in interface nxopen.drawings.ViewCreationWizardBuilder
-
Returns the associative alignment toggle
License requirements: None.
- associativeAlignment() - Method in interface nxopen.drawings.ViewWorkflowBuilder
-
Returns the associative alignment enable alignement between views
License requirements: None.
- associativeAlignment() - Method in interface nxopen.preferences.PartDrafting
-
Returns the flag indicating whether to associatively align the view when placing it
License requirements: None.
- associativeAngle() - Method in interface nxopen.annotations.CenterMarkSettingsBuilder
-
Returns the AssociativeAngle builder of center Mark
License requirements: None.
- associativeAngle() - Method in interface nxopen.drawings.GeneralViewStyle
-
Returns the value of angle of a member view.
- AssociativeAngleBuilder - Interface in nxopen.drawings
-
This builder allows the user to create an associative or non-associative angle by measuring
between a combination of two objects or vectors evaluated on a specified plane, or by an expression .
- AssociativeAngleBuilder.EvaluationPlaneType - Class in nxopen.drawings
-
evaluation plane types
- AssociativeAngleBuilder.ObjectType - Class in nxopen.drawings
-
Represents the object type.
- AssociativeArc - Interface in nxopen.features
-
Represents a associative arc feature
To create or edit an instance of this class, use
AssociativeArcBuilder
Created in NX5.0.0
- AssociativeArcBuilder - Interface in nxopen.features
-
- AssociativeArcBuilder.CenterReference - Class in nxopen.features
-
Represents references for center point
- AssociativeArcBuilder.EndOption - Class in nxopen.features
-
Represents end point options type
- AssociativeArcBuilder.EndReference - Class in nxopen.features
-
Represents references for end point
- AssociativeArcBuilder.MidOption - Class in nxopen.features
-
Represents mid point options type
- AssociativeArcBuilder.MidReference - Class in nxopen.features
-
Represents references for mid point
- AssociativeArcBuilder.StartOption - Class in nxopen.features
-
Represents start point options type
- AssociativeArcBuilder.StartReference - Class in nxopen.features
-
Represents references for start point
- AssociativeArcBuilder.Types - Class in nxopen.features
-
Represents arc type.
- associativeEditFreeForm() - Method in interface nxopen.preferences.SessionModeling
-
Returns the associative edit free form option.
- AssociativeLine - Interface in nxopen.features
-
Represents a associative line feature
To create or edit an instance of this class, use
AssociativeLineBuilder
Created in NX5.0.0
- AssociativeLineBuilder - Interface in nxopen.features
-
- AssociativeLineBuilder.EndOption - Class in nxopen.features
-
Represents end options type.
- AssociativeLineBuilder.EndReference - Class in nxopen.features
-
Represents references for end point
- AssociativeLineBuilder.StartOption - Class in nxopen.features
-
Represents start options type.
- AssociativeLineBuilder.StartReference - Class in nxopen.features
-
Represents references for start point
- associativeOrientation() - Method in interface nxopen.drawings.OvtBuilder
-
Returns the associative orientation that specifies whether or not the view
will be associative to the specified plane and/or X direction
License requirements: drafting ("DRAFTING")
.
- AssociativeOrigin() - Constructor for class nxopen.uf.UFDrf.AssociativeOrigin
-
- AssociativeOrigin(UFDrf.AssociativeOriginType, Tag, Tag, Tag, Tag, UFDrf.AlignPosition, Tag, UFDrf.AlignPosition, Tag, int, Tag, Tag, Tag, UFDrf.AlignPosition, double, double, Tag, UFDrf.StackAlignPosition) - Constructor for class nxopen.uf.UFDrf.AssociativeOrigin
-
- AssociativeOriginData() - Constructor for class nxopen.annotations.Annotation.AssociativeOriginData
-
- AssociativeOriginData(AssociativeOriginType, View, View, Point, Annotation, AlignmentPosition, Annotation, AlignmentPosition, Annotation, int, View, Point, Annotation, AlignmentPosition, double, double, StackAlignmentPosition) - Constructor for class nxopen.annotations.Annotation.AssociativeOriginData
-
Constructor for the AssociativeOriginData object.
- AssociativeOriginType - Class in nxopen.annotations
-
Specifies the type of associativity for an annotation's origin
- associativeOutputOption() - Method in interface nxopen.features.AOCSBuilder
-
Returns the associative output option for the AOCS operation.
- associativePosition() - Method in interface nxopen.tooling.StandardPartBuilder
-
Returns the flag to indicate whether to use the associative position method.
- associativePosition() - Method in interface nxopen.tooling.StandardPartPositionBuilder
-
Returns the associative status between standardpart and the offset point.
- associativeSplit() - Method in interface nxopen.weld.WeldJointBuilder
-
Returns whether split joints should be associative
License requirements: None.
- AssociativeText - Interface in nxopen.annotations
-
Associative text class creates text associated to object and part attributes as well as
object properties such as a drawing sheet name.
- AssociativeText.ObjectAttributeData - Class in nxopen.annotations
-
- AssociativeText.PartAttributeData - Class in nxopen.annotations
-
- AssociativeText.PropertyType - Class in nxopen.annotations
-
the associative text property type to be used with the object
- associativeToggle() - Method in interface nxopen.features.GeneralConicBuilder
-
Returns the associative toggle
License requirements: None.
- Associativity - Interface in nxopen.annotations
-
Represents an associativity object.
- associativity() - Method in interface nxopen.SketchProjectBuilder
-
Returns the associativity of projection.
- associativity() - Method in interface nxopen.weld.JointmarkBuilder
-
Returns the automatic update option also known as associativity.
- associativity1() - Method in interface nxopen.annotations.AssociateDimensionBuilder
-
Returns the first associativity
License requirements: None.
- associativity2() - Method in interface nxopen.annotations.AssociateDimensionBuilder
-
Returns the second associativity
License requirements: None.
- AssociativityBuilder - Interface in nxopen.annotations
-
- associativityData - Variable in class nxopen.uf.UFDrf.AskAssociativityData
-
- associativityData - Variable in class nxopen.uf.UFDrf.LeaderData
-
- associativityEnumType() - Method in interface nxopen.features.MapleBuilder
-
- associativityForLightweightSectionViews() - Method in interface nxopen.annotations.PmiPreferences
-
Returns the option indicating whether plane is associative for Lightweight Section Views
License requirements: None.
- AssociativityLineOption - Class in nxopen.annotations
-
Specifies the associativity line option
- AssociativityPointOption - Class in nxopen.annotations
-
Specifies the associativity point option
- associativityToggle() - Method in interface nxopen.features.MapleBuilder
-
- AssociativityType - Class in nxopen.features
-
Represents the associativity type for a dimension entity
- associativityType() - Method in interface nxopen.features.MathIntegrationBuilder
-
Returns the option to control associativity to the equation
License requirements: None.
- AssocInfo() - Constructor for class nxopen.uf.UFDrf.AssocInfo
-
- AssocInfo(Tag, Tag, UFDrf.AssocType, int) - Constructor for class nxopen.uf.UFDrf.AssocInfo
-
- assocModifier - Variable in class nxopen.uf.UFDrf.AssocInfo
-
- assocObject1 - Variable in class nxopen.uf.UFDrf.ObjectAssocData
-
- assocObject2 - Variable in class nxopen.uf.UFDrf.ObjectAssocData
-
- assocObjects - Variable in class nxopen.uf.UFDrf.AskOrdoriginInfoData
-
- assocObjectTag - Variable in class nxopen.uf.UFDrf.AssocInfo
-
- assocObjectViewTag - Variable in class nxopen.uf.UFDrf.AssocInfo
-
- assocObjs - Variable in class nxopen.uf.UFDrf.ArcInfo
-
- assocObjs - Variable in class nxopen.uf.UFDrf.CenterlineInfo
-
- assocObjs - Variable in class nxopen.uf.UFDrf.DimLineInfo
-
- assocObjs - Variable in class nxopen.uf.UFDrf.LeaderInfo
-
- assocPoint - Variable in class nxopen.uf.UFDrf.ObjectAssocData
-
- assocReachZone - Variable in class nxopen.HumanReachZone.Data
-
Flag for associative reach zone
- assocReferencePoint() - Method in interface nxopen.HumanData
-
Returns the flag for associative reference point
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- assocType - Variable in class nxopen.Sketch.DimensionGeometry
-
- assocType - Variable in class nxopen.uf.UFDrf.AssocInfo
-
- assocValue - Variable in class nxopen.Sketch.DimensionGeometry
-
See table for meaning.
- assoDistance() - Method in interface nxopen.cae.NodeAssociationBuilder
-
Returns the association distance
License requirements: None.
- assoelems - Variable in class nxopen.cae.modelcheck.ElementEdgeCheckBuilder.DoCheckData
-
associated elements for free and/or non-manifold element edges,
if both checks are done at the same time, the elements associated
to free edges are returned firstly in the list.
- AssortpartArc() - Constructor for class nxopen.uf.UFDrf.AssortpartArc
-
- AssortpartArc(int, int[], double) - Constructor for class nxopen.uf.UFDrf.AssortpartArc
-
- AssortpartArrow() - Constructor for class nxopen.uf.UFDrf.AssortpartArrow
-
- AssortpartArrow(int, int[], double) - Constructor for class nxopen.uf.UFDrf.AssortpartArrow
-
- AssortpartLine() - Constructor for class nxopen.uf.UFDrf.AssortpartLine
-
- AssortpartLine(int, int[], double) - Constructor for class nxopen.uf.UFDrf.AssortpartLine
-
- AssortpartText() - Constructor for class nxopen.uf.UFDrf.AssortpartText
-
- AssortpartText(int, int[], String[], double[]) - Constructor for class nxopen.uf.UFDrf.AssortpartText
-
- assoToggle() - Method in interface nxopen.features.vehicledesign.HoodVisibilityBuilder
-
Returns the associative toggle; toggle on to create feature
License requirements: None.
- assoToggle() - Method in interface nxopen.features.vehicledesign.VisionPlaneBuilder
-
Returns the associative option that determines whether to create feature or not.
- assoToggle() - Method in interface nxopen.features.vehicledesign.WindshieldDatumBuilder
-
Returns the associative option that determines whether to create feature or not.
- ASSY_FEM_PART_NEW_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- ASSY_FEM_PART_OPEN_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- ASSY_FEM_SAVEAS_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- AssyFEModel - Interface in nxopen.cae
-
This class represents an Assembly Finite Element Model.
- AssyFEModel.MappedComponentRemovalType - Class in nxopen.cae
-
the unmap types
- AssyFEModel.RepositionType - Class in nxopen.cae
-
the reposition types
- AssyFemPart - Interface in nxopen.cae
-
Represents an NX part of type .afm.
- ASTERISK - Static variable in class nxopen.cae.MarkerType0d
-
- ASTERISK - Static variable in class nxopen.cae.ModelDisplayBuilder.FreeEdgeMarker
-
Asterisk marker
- ASTERISK - Static variable in class nxopen.cae.ModelDisplayBuilder.NodeMarkerType
-
Asterisk
- ASTERISK - Static variable in class nxopen.cae.ModelDisplayBuilder.NodeUnattachedMarkerType
-
Asterisk
- ASTERISK - Static variable in class nxopen.cae.ModelDisplayBuilder.StitchedEdgeMarker
-
Asterisk marker
- ASTERISK - Static variable in class nxopen.cae.xyplot.PointMarker
-
Asterisk marker
- ASTERISK - Static variable in class nxopen.fields.DisplayPropertiesBuilder.IndepDomDispType
-
- ASTERISK - Static variable in class nxopen.fields.DisplayPropertiesBuilder.ValuesEnum
-
- ASTERISK - Static variable in class nxopen.uf.UFDisp.PolyMarker
-
- ASTERISK - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- ASYMMETRIC - Static variable in class nxopen.ExtrudeTaperDataTaperType
-
ASymmetric taper
- ASYMMETRIC - Static variable in class nxopen.features.AeroFlangeBuilder.WidthDimensionOptions
-
- ASYMMETRIC - Static variable in class nxopen.features.LawExtensionBuilder.OppositeSideExtensionOptions
-
Asymmetric extension
- ASYMMETRIC - Static variable in class nxopen.features.LawExtensionBuilderEx.OppositeSideExtensionOptions
-
Asymmetric extension
- ASYMMETRIC - Static variable in class nxopen.features.RibBuilder.RibThicknessOffsetOptions
-
Asymmetric Offset
- ASYMMETRIC - Static variable in class nxopen.features.shipdesign.AlongGuideCutBuilder.WaterStopOffsetMethod
-
The left offset and right offset are asymmetric
- ASYMMETRIC - Static variable in class nxopen.geometricutilities.SimpleDraft.SimpleDraftType
-
Draft on both sides of the profile using the not same angle
- ASYMMETRIC - Static variable in class nxopen.SketchChamferBuilder.ChamferOptions
-
Asymmetric - specify two distances
- ASYMMETRIC_OFFSET - Static variable in class nxopen.features.ResizeChamferBuilder.SectionType
-
- ASYMPTOTE - Static variable in class nxopen.features.shipdesign.RollingLineBuilder.ConstructionMethodTypes
-
Use an initial value method and march along and create the asymptotic lines.
- asyTimoshenkoCorrection() - Method in interface nxopen.motion.BeamForceBuilder
-
Returns the ASY Timoshenko correction
License requirements: mechanisms ("MECHANISMS")
.
- asyTimoshenkoCorrection() - Method in interface nxopen.motion.SplineBeamPropertyBuilder
-
Returns the ASY Timoshenko correction
License requirements: mechanisms ("MECHANISMS")
.
- aszTimoshenkoCorrection() - Method in interface nxopen.motion.BeamForceBuilder
-
Returns the ASZ Timoshenko correction
License requirements: mechanisms ("MECHANISMS")
.
- aszTimoshenkoCorrection() - Method in interface nxopen.motion.SplineBeamPropertyBuilder
-
Returns the ASZ Timoshenko correction
License requirements: mechanisms ("MECHANISMS")
.
- at - Variable in class nxopen.uf.UFRoute.AskRcpAtTermPortData
-
- AT_ALL_TRANSITIONS - Static variable in class nxopen.features.AestheticFaceBlendBuilder.SegmentationType
-
Segmentation at all transitions
- AT_ALL_TRANSITIONSAND_MERGE_SMALL_BLEND_FACES - Static variable in class nxopen.features.AestheticFaceBlendBuilder.SegmentationType
-
Secgmentation at all transitions and merge small blend faces
- AT_ANGLE - Static variable in class nxopen.features.AssociativeLineBuilder.EndOption
-
At angle
- AT_ANGLE - Static variable in class nxopen.features.AssociativeLineBuilder.StartOption
-
At angle
- AT_APOINT - Static variable in class nxopen.annotations.AssociativeOriginType
-
- AT_BOTH - Static variable in class nxopen.die.TrimTaskBuilder.MatchCutTypes
-
At both start and end planes.
- AT_CENTER - Static variable in class nxopen.features.sheetmetal.FlangeBendPropertiesBuilder.WidthOptions
-
- AT_CORNERS - Static variable in class nxopen.features.DivideCurveBuilder.Types
-
At Corners
- AT_DISTANCE - Static variable in class nxopen.geometricutilities.BlendStopshortBuilder.Choices
-
Distance
- AT_DROP - Static variable in class nxopen.cae.responsesimulation.VelocityImpactParameters.StartPositionType
-
Calculation starts from the drop time
- AT_EDGE_END - Static variable in class nxopen.features.sheetmetal.FlangeBuilder.WidthTypeOptions
-
The flange starts from the specified end of the edge.
- AT_END - Static variable in class nxopen.cam.BoundarySetPlanarMill.TrimExtendPosition
-
trim or extend at end
- AT_END - Static variable in class nxopen.cam.MillOperationBuilder.WallCleanupTypes
-
wall cleanup: at end
- AT_END - Static variable in class nxopen.die.TrimTaskBuilder.MatchCutTypes
-
At end plane only.
- AT_END - Static variable in class nxopen.features.sheetmetal.FlangeBendPropertiesBuilder.WidthOptions
-
- AT_END - Static variable in class nxopen.features.sheetmetal.SheetmetalManagerFlangeWidthOption
-
at end
- AT_HEADSTOCK - Static variable in class nxopen.cam.BoundaryTurnBlank.Position
-
- AT_IMPACT - Static variable in class nxopen.cae.responsesimulation.VelocityImpactParameters.StartPositionType
-
Calculation starts from the impact time
- AT_INTERSECTION - Static variable in class nxopen.geometricutilities.BlendStopshortBuilder.Choices
-
Intersection
- AT_KNOTPOINTS - Static variable in class nxopen.features.DivideCurveBuilder.Types
-
At Knotpoints
- AT_LOCATION - Static variable in class nxopen.die.HandlingCoreBuilder.Types
-
Location specified by the user.
- AT_PHASE_ANGLE - Static variable in class nxopen.cae.xyplot.ComplexOption2D
-
At phase angle for 2D plot
- AT_PHASE_ANGLE - Static variable in class nxopen.cae.xyplot.ComplexOption2DBarChart
-
At phase angle for 2D bar chart plot
- AT_PHASE_ANGLE - Static variable in class nxopen.cae.xyplot.ComplexOption2DColorContour
-
At phase angle for 2D color contour plot plot
- AT_PHASE_ANGLE - Static variable in class nxopen.cae.xyplot.ComplexOption3D
-
At phase angle for 3D plot
- AT_PLANE - Static variable in class nxopen.die.AddendumSectionBuilder.SectionLocationType
-
Create section at a plane.
- AT_PLANE_LOCATION - Static variable in class nxopen.features.StudioXformBuilder.PlanarizeMethodType
-
Deprecated.
planarize at plane location
- AT_PLANE_LOCATION - Static variable in class nxopen.features.StudioXformBuilderEx.PlanarizeMethodType
-
planarize at plane location
- AT_POINT - Static variable in class nxopen.die.AddendumSectionBuilder.SectionLocationType
-
Create section at a point.
- AT_POINT - Static variable in class nxopen.geometricutilities.CurveExtendData.LimitOptions
-
At Point
- AT_POINT - Static variable in class nxopen.routing.SubdivideSegmentBuilder.Types
-
At Point
- AT_POLE_LOCATION - Static variable in class nxopen.features.StudioXformBuilder.PlanarizeMethodType
-
Deprecated.
planarize at pole location
- AT_POLE_LOCATION - Static variable in class nxopen.features.StudioXformBuilderEx.PlanarizeMethodType
-
planarize at pole location
- AT_REVOLVE_ANGLE - Static variable in class nxopen.cae.AxiSymmetricParameters.Options
-
- AT_START - Static variable in class nxopen.cam.BoundarySetPlanarMill.TrimExtendPosition
-
trim or extend at start
- AT_START - Static variable in class nxopen.cam.MillOperationBuilder.WallCleanupTypes
-
wall cleanup: at start
- AT_START - Static variable in class nxopen.die.TrimTaskBuilder.MatchCutTypes
-
At start plane only.
- AT_START_AND_END - Static variable in class nxopen.cam.BoundarySetPlanarMill.TrimExtendPosition
-
trim or extend at start and at end
- AT_TERMINATION - Static variable in class nxopen.BaseSession.LibraryUnloadOption
-
Unload the library when the NX session terminates
- AT_THREAD_POINT - Static variable in class nxopen.cam.NcmWedmBuilder.CutcomOnTypes
-
cutcom on at thread point
- AT_TRANSITIONSON_FACE_CHAIN1 - Static variable in class nxopen.features.AestheticFaceBlendBuilder.SegmentationType
-
Segmentation at Face Chain1 transition
- AT_TRANSITIONSON_FACE_CHAIN2 - Static variable in class nxopen.features.AestheticFaceBlendBuilder.SegmentationType
-
Segementation at Face Chain2 transition
- AT_VALUE - Static variable in class nxopen.cae.ResultProbeBuilder.IterationSelection
-
- ATHWARTSHIP - Static variable in class nxopen.cae.responsesimulation.DDAMComponentData.LoadingType
-
- ATHWARTSHIP - Static variable in class nxopen.cae.responsesimulation.DDAMExcitation.LoadingType
-
- atl() - Method in interface nxopen.features.vehicledesign.SeatBeltAnchorageBuilder
-
Returns the atl option
License requirements: None.
- atLeadingEdge() - Method in interface nxopen.cam.LeadAngles
-
Returns the lead angle at leading edge
License requirements: None.
- ATPOINT - Static variable in class nxopen.motion.JointDefine.Type
-
This joint type allows 3 DOF: Markers are
always coincident, and only rotational motion
is allowed.
- ATTACH_POINT_BOTTOM_LEFT - Static variable in class nxopen.uf.UFTabnot.AttachPoint
-
- ATTACH_POINT_BOTTOM_RIGHT - Static variable in class nxopen.uf.UFTabnot.AttachPoint
-
- ATTACH_POINT_TOP_LEFT - Static variable in class nxopen.uf.UFTabnot.AttachPoint
-
- ATTACH_POINT_TOP_RIGHT - Static variable in class nxopen.uf.UFTabnot.AttachPoint
-
- ATTACH_TO_DIFFERENT_BODY - Static variable in class nxopen.uf.UFConstants
-
- ATTACH_TO_LATER_OBJECT - Static variable in class nxopen.uf.UFConstants
-
- attachAlternate(Tag, String, String, String, String, String, String, boolean) - Method in interface nxopen.uf.UFUgmgr
-
- attachBody() - Method in interface nxopen.mechatronics.AlignBodyBuilder
-
Returns the rigid body which snap point attaches on.
- attachBody - Variable in class nxopen.uf.UFMotion.ScalarForceTorque
-
- ATTACHED_TO_FCF - Static variable in class nxopen.uf.UFGdt.DatumAssocType
-
- ATTACHED_TO_STACK - Static variable in class nxopen.annotations.AssociativeOriginType
-
- ATTACHED_TO_STUB - Static variable in class nxopen.uf.UFGdt.DatumAssocType
-
- attachEdge() - Method in interface nxopen.tooling.ScrapDesignBuilder
-
Returns the edge that overlap will be attached
License requirements: None.
- attachedLoadRecipe() - Method in interface nxopen.cae.SimSolution
-
- AttachElementsBuilder - Interface in nxopen.cae
-
- AttachElementsBuilder.AttachOption - Class in nxopen.cae
-
attach types
- AttachElementsBuilder.SplitLineOption - Class in nxopen.cae
-
split line types
- attachFidelityCheckData() - Method in interface nxopen.preferences.SessionNXGateway
-
Returns the attach FC data flag for I-DEAS gateway
License requirements: None.
- attachment() - Method in interface nxopen.mechatronics.PhysicsJointBuilder
-
Returns the attachment of joint.
- attachment() - Method in interface nxopen.mechatronics.ProxyOverrideObjectBuilder
-
Returns the attachment that is encapsulated in the proxy override object
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- attachment() - Method in interface nxopen.motion.ConnectorBuilder
-
Returns the attachment type
License requirements: None.
- attachment() - Method in interface nxopen.motion.GeneralCouplerBuilder
-
Returns the attachment type
License requirements: None.
- Attachment() - Constructor for class nxopen.uf.UFUi.Attachment
-
- Attachment(short, short, short, short, short, short, short, String, String, String) - Constructor for class nxopen.uf.UFUi.Attachment
-
- Attachment - Interface in nxopen.uistyler
-
Represents an Attachment for UI Styler .
- Attachment.AttachType - Class in nxopen.uistyler
-
Represents alignment option for Styler Item
- ATTACHMENT_POINT_RIM_OFFSET - Static variable in class nxopen.features.vehicledesign.BaseDataWheelBuilder.PositionDefinitionOptions
-
- attachmentDirection() - Method in interface nxopen.features.shipdesign.BracketBuilder
-
Returns the install direction on attachment face.
- attachmentFace() - Method in interface nxopen.features.shipdesign.BracketBuilder
-
Returns the attachment face.
- attachmentPlate() - Method in interface nxopen.features.shipdesign.StiffenerBuilder
-
Returns the selected attachment plate
License requirements: None.
- attachmentPlateOption() - Method in interface nxopen.features.shipdesign.StiffenerBuilder
-
Returns the attachment plate option
License requirements: None.
- attachmentPoint() - Method in interface nxopen.mechatronics.LinearLimitJointBuilder
-
Returns the attachment point.
- attachmentPoint() - Method in interface nxopen.mechatronics.LinearSpringJointBuilder
-
Returns the attachment point.
- attachments - Variable in class nxopen.uf.UFMotion.AskAttachmentsOfTypeData
-
- attachmentStiffener() - Method in interface nxopen.features.shipdesign.BracketBuilder
-
Returns the attachment stiffener.
- attachmentTag - Variable in class nxopen.uf.UFMotion.Marker
-
- attachmentType() - Method in interface nxopen.cae.xyplot.MarkerStyleSetting
-
Returns the attachment type for associative marker
License requirements: None.
- attachmentType() - Method in interface nxopen.features.RapidSurfaceBuilder
-
Returns the attachment type
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- attachmentType() - Method in interface nxopen.issue.IssueAttachment
-
Returns the attachment type
License requirements: None.
- attachmentVector() - Method in interface nxopen.mechatronics.AngularLimitJointBuilder
-
Returns the attachment vector.
- attachmentVector() - Method in interface nxopen.mechatronics.AngularSpringJointBuilder
-
Returns the attachment vector.
- attachNoteToView(Tag, Tag) - Method in interface nxopen.uf.UFDraw
-
- attachPlane() - Method in interface nxopen.Sketch
-
Returns the plane that the sketch is attached to
License requirements: None.
- attachPoint() - Method in interface nxopen.mechatronics.AlignBodyBuilder
-
Returns the positioning of snap point.
- attachPoint() - Method in interface nxopen.mechatronics.SlidingJointBuilder
-
Returns the anchor point of attach.
- attachPoint - Variable in class nxopen.uf.UFGdt.LeaderSpec
-
- attachPoint - Variable in class nxopen.uf.UFTabnot.SectionPrefs
-
- attachRows(Tag, int, Tag[]) - Method in interface nxopen.uf.UFPlist
-
- attachScrap() - Method in interface nxopen.tooling.ScrapDesignBuilder
-
Returns the scrap that overlap will be attached
License requirements: None.
- attachSelectedPath() - Method in interface nxopen.routing.TransformPathBuilder
-
Attaches the selected path back to the path it was originally
attached to before the call to
TransformPathBuilder.detachSelectedPath()
License requirements: routing_base ("Routing Basic")
Created in NX8.0.0
- attachToFace(Tag, Tag, Tag, int[], int) - Method in interface nxopen.uf.UFSket
-
- attachToIdSymbolVertex() - Method in interface nxopen.annotations.SymbolStyleBuilder
-
Returns the id symbol attachment method
License requirements: None.
- attachToNewGeometry(Annotation, DisplayableObject) - Method in interface nxopen.features.EditDimensionBuilder
-
Attach the given dimension to new geometry
License requirements: solid_modeling ("SOLIDS MODELING")
.
- attachType() - Method in interface nxopen.cae.AttachElementsBuilder
-
Returns an attach option
License requirements: None.
- attachTypeLeft - Variable in class nxopen.uf.UFUi.Attachment
-
- attachTypeRight - Variable in class nxopen.uf.UFUi.Attachment
-
- attachTypeTop - Variable in class nxopen.uf.UFUi.Attachment
-
- attemptMappedMeshing - Variable in class nxopen.uf.UFSf.UgsTetMeshParms
-
- attemptQuadMapping - Variable in class nxopen.uf.UFSf.Ugs2dMeshParms
-
- ATTEN - Static variable in class nxopen.uf.UFDisp.Context
-
- attenPt - Variable in class nxopen.uf.UFDisp.Inquire
-
- ATTENTION_POINT - Static variable in class nxopen.userdefinedobjects.UserDefinedEvent.Reason
-
Find Attention Point for the UDO event
- attentionColor() - Method in interface nxopen.preferences.PartVisualizationColorSetting
-
Returns the color that an HD3D objects associated objects are highlighted with when the HD3D object is selected.
- attentionPoint - Variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.ViewModeData
-
The attention point of the geometry just displayed
- atTimestamp() - Method in interface nxopen.cam.SurfaceRegions
-
Returns the at timestamp flag
License requirements: None.
- atTimestamp - Variable in class nxopen.uf.UFModl.LinkedExt
-
- Attr() - Constructor for class nxopen.uf.UFSfLegend.Attr
-
- Attr(int, int, boolean, double, int, UFSfLegend.Title, UFSfLegend.IndexAttr, UFSfLegend.Title, int, int) - Constructor for class nxopen.uf.UFSfLegend.Attr
-
- attr() - Method in interface nxopen.UFSession
-
- ATTR_CATALOG_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- ATTR_CATALOG_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- ATTR_DISCREPANCY - Static variable in class nxopen.routing.CustomManager.CallbackReason
-
Called after the Place Part and Replace Part commands.
- ATTR_VALUE_TYPE_DOUBLE - Static variable in class nxopen.uf.UFMfm.AttrValueType
-
- ATTR_VALUE_TYPE_INTEGER - Static variable in class nxopen.uf.UFMfm.AttrValueType
-
- ATTR_VALUE_TYPE_LOGICAL - Static variable in class nxopen.uf.UFMfm.AttrValueType
-
- ATTR_VALUE_TYPE_STRING - Static variable in class nxopen.uf.UFMfm.AttrValueType
-
- ATTR_VALUE_TYPE_UNDEFINED - Static variable in class nxopen.uf.UFMfm.AttrValueType
-
- attraction() - Method in interface nxopen.features.FillHoleBuilder
-
Returns the attraction ratio to the facet body
License requirements: None.
- atTrailingEdge() - Method in interface nxopen.cam.LeadAngles
-
Returns the lead angle at trailing edge
License requirements: None.
- attribList - Variable in class nxopen.display.IrayPlusMaterialEditorBuilder.ComponentInfoData
-
- attribList() - Method in interface nxopen.routing.FindByAttributesBuilder
-
Returns the attribute list containing search criteria
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- attribName() - Method in interface nxopen.features.shipdesign.TransFrameBuilder
-
Returns the attribute for name type.
- attribRef() - Method in interface nxopen.features.shipdesign.TransFrameBuilder
-
Returns the attribute for reference type.
- attribueobject - Variable in class nxopen.display.IrayPlusMaterialEditorBuilder.ComponentInfoData
-
- attribute() - Method in interface nxopen.annotations.PmiAttributeBuilder
-
Returns the
Pmi
for this annotation
License requirements: None.
- Attribute() - Constructor for class nxopen.mechatronics.ElectricalPartBuilder.Attribute
-
- Attribute(String, String) - Constructor for class nxopen.mechatronics.ElectricalPartBuilder.Attribute
-
Constructor for the Attribute object.
- ATTRIBUTE - Static variable in class nxopen.pdm.PartOperationImportBuilder.NumberingSourceOption
-
- ATTRIBUTE - Static variable in class nxopen.preferences.RoutingPart.PreferredPortMethod
-
Examine an attribute applied to the
port, and match it's value to a desired
value.
- ATTRIBUTE - Static variable in class nxopen.routing.SplinePathBuilder.SplinePathRadiusSource
-
Specify radius by attribute.
- ATTRIBUTE - Static variable in class nxopen.shapesearch.ShapeSearchBuilder.SearchByType
-
search by attributes
- ATTRIBUTE_ALREADY_EXISTS - Static variable in class nxopen.uf.UFConstants
-
- ATTRIBUTE_COPY_REPLACE_PART - Static variable in class nxopen.routing.CustomManager.CallbackReason
-
Called after the Replace Part command.
- ATTRIBUTE_DOES_NOT_EXIST - Static variable in class nxopen.uf.UFConstants
-
- ATTRIBUTE_NAME - Static variable in class nxopen.preferences.RoutingElectrical.ComponentMatchType
-
Match attribute name during component assignment.
- ATTRIBUTE_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
-
Part attribute property
- ATTRIBUTE_VALUES - Static variable in class nxopen.routing.RoutingBulkReplacementBuilderReplacementMethodType
-
Search for a replacement object using attribute values
- attributeColor() - Method in interface nxopen.die.DieAttributesBuilder
-
Returns the color to be applied to the face, or faces, in the application
License requirements: None.
- attributeColor() - Method in interface nxopen.features.ConcaveFacesBuilder
-
Returns the color to be applied to the face.
- attributeCount - Variable in class nxopen.uf.UFFam.ClassData
-
- attributeCount - Variable in class nxopen.uf.UFFam.FamilyData
-
- attributeCount - Variable in class nxopen.uf.UFFam.IntentData
-
- attributeCustomizedFormulas() - Method in interface nxopen.validate.CheckerNode
-
Returns the customized formula lines of checker.
- AttributeData() - Constructor for class nxopen.uf.UFFam.AttributeData
-
- AttributeData(int, Tag, String, String, String) - Constructor for class nxopen.uf.UFFam.AttributeData
-
- attributeData - Variable in class nxopen.uf.UFFam.ClassData
-
- attributeEditHandler(LinkedMirrorPartAttributeEditEvent) - Method in interface nxopen.LinkedPartManager.AttributeEditHandler
-
User defined attribute edit method that is called whenever a linked mirror part is created or updated from source
License requirements: None.
- attributefilter - Variable in class nxopen.routing.ReuseLibrary.SpecificationsGetAttributeRelationshipsData
-
Attribute filters.
- AttributeGroup - Interface in nxopen.pdm
-
Represents an attribute group.
- attributeGroup - Variable in class nxopen.uf.UFPd.ProductAttribute
-
- attributeGroup - Variable in class nxopen.uf.UFPd.ProductAttribute2
-
- AttributeGroupCollection - Interface in nxopen.pdm
-
Represents a collection of attribute group objects.
- AttributeGroupDescription - Interface in nxopen.pdm
-
Represents an attribute group type.
- AttributeGroupDescriptionCollection - Interface in nxopen.pdm
-
Represents a collection of attribute group description objects.
- attributeGroupDescriptions() - Method in interface nxopen.pdm.PdmSession
-
- AttributeGroupReviseBuilder - Interface in nxopen.pdm
-
Represents an attribute group revise builder.
- AttributeGroupReviseBuilder.SaveAsActionType - Class in nxopen.pdm
-
Represents the save as action on a managed attribute group
- attributeGroups() - Method in interface nxopen.CollaborativeDesign
-
- AttributeHolder - Interface in nxopen.ame
-
JA class for the AttributeHolder object
This is an abstract class, and cannot be instantiated.
- AttributeHolder - Interface in nxopen.diagramminglibraryauthor
-
- AttributeHolder - Interface in nxopen.routing
-
- attributeHolder() - Method in interface nxopen.routing.PlaceElbowsBuilder
-
Returns the attribute holder for elbow placement
License requirements: routing_pipetube ("Routing Piping and Tubing")
.
- AttributeInformation() - Constructor for class nxopen.NXObject.AttributeInformation
-
- AttributeInformation(NXObject.AttributeType, String, String, String, boolean, int, double, String, String, NXObject.ComputationalTime, String, boolean, boolean, boolean, boolean, boolean, boolean, boolean, boolean, boolean, int, Unit, Expression) - Constructor for class nxopen.NXObject.AttributeInformation
-
Constructor for the AttributeInformation object.
- AttributeItemBuilder - Interface in nxopen.drafting
-
- AttributeItemBuilderList - Interface in nxopen.drafting
-
Represents a list of objects.
- AttributeIterator - Interface in nxopen
-
This class is used to iterate over the user attributes of an object, with options to restrict or extend such searches .
- attributeList() - Method in interface nxopen.features.shipdesign.RoomBuilder
-
Returns the room attribute list.
- attributeList() - Method in interface nxopen.weld.CharacteristicsSelectionBuilder
-
Returns the list of potential attributes for this weld feature.
- AttributeManager - Interface in nxopen
-
Provides methods for querying and updating attributes.
- attributeManager() - Method in interface nxopen.Session
-
- attributeMaterial() - Method in interface nxopen.features.shipdesign.CustomBracketBuilder
-
Returns the material attribute
License requirements: None.
- attributeMaterial() - Method in interface nxopen.features.shipdesign.ProfileBuilder
-
Returns the material attribute
License requirements: None.
- attributeMaterial() - Method in interface nxopen.features.shipdesign.SteelSupportBuilder
-
Returns the attribute material
License requirements: None.
- AttributeMembersBuilder - Interface in nxopen.routing
-
- attributeMembersBuilder() - Method in interface nxopen.routing.FindByAttributesBuilder
-
Creates an AttributeMembersBuilder object used to create list item
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- attributeName() - Method in interface nxopen.annotations.TableColumnBuilder
-
Returns the attribute name specifies the attribute name for cells in column.
- attributeName() - Method in interface nxopen.features.shipdesign.CustomBracketBuilder
-
Returns the name attribute value
License requirements: None.
- attributeName() - Method in interface nxopen.features.shipdesign.ProfileBuilder
-
Returns the name attribute value
License requirements: None.
- attributeName() - Method in interface nxopen.features.shipdesign.SteelSupportBuilder
-
Returns the name attribute value
License requirements: None.
- attributeName - Variable in class nxopen.mechatronics.ElectricalPartBuilder.Attribute
-
Attribute name
- attributeName - Variable in class nxopen.optimization.DesignStudyBuilder.DesignStudyObjective
-
Attribute name
- attributeName - Variable in class nxopen.optimization.DesignStudyBuilder.DesignStudyVariable
-
Attribute name
- attributeName - Variable in class nxopen.optimization.OptimizationBuilder.OptimizationConstraint
-
Attribute name
- attributeName - Variable in class nxopen.optimization.OptimizationBuilder.OptimizationObjective
-
Attribute name
- attributeName - Variable in class nxopen.optimization.OptimizationBuilder.OptimizationVariable
-
Attribute name
- attributeName - Variable in class nxopen.Part.PartFamilyAttributeData
-
Deprecated.
the attribute name
- attributeName - Variable in class nxopen.preferences.RoutingPart.PreferredPortAttributeData
-
- attributeName() - Method in interface nxopen.routing.AttributeMembersBuilder
-
Returns the string containing attribute title to search for
License requirements: routing_base ("Routing Basic")
.
- attributeName() - Method in interface nxopen.routing.FindByAttributesBuilder
-
Returns the string containing attribute title to search for
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- attributeName - Variable in class nxopen.uf.UFPd.ProductAttribute
-
- attributeName - Variable in class nxopen.uf.UFPd.ProductAttribute2
-
- attributenames - Variable in class nxopen.features.CustomFeatureData.AllCustomAttributeNameAndTypesData
-
- attributenames - Variable in class nxopen.mechatronics.ComparisonResultElectricalPart.AttributesData
-
Array of attribute names
- attributeNames - Variable in class nxopen.uf.UFMfm.AskAttributesData
-
- attributeObject - Variable in class nxopen.optimization.DesignStudyBuilder.DesignStudyObjective
-
Object which the attribute belongs to, it makes sense with geometry design variable type
- attributeObject - Variable in class nxopen.optimization.DesignStudyBuilder.DesignStudyVariable
-
Object which the attribute belongs to, it makes sense with geometry design variable type
- attributeObject - Variable in class nxopen.optimization.OptimizationBuilder.OptimizationConstraint
-
Object which the attribute belongs to, it makes sense with geometry design variable type
- attributeObject - Variable in class nxopen.optimization.OptimizationBuilder.OptimizationObjective
-
Object which the attribute belongs to, it makes sense with geometry design variable type
- attributeObject - Variable in class nxopen.optimization.OptimizationBuilder.OptimizationVariable
-
Object which the attribute belongs to, it makes sense with geometry design variable type
- attributeOfRootPart() - Method in interface nxopen.tooling.ObjectAttributeManagementBuilder
-
Returns the option whether to show attributes of root part
License requirements: None.
- attributeOrigin() - Method in interface nxopen.weld.ExportWeldBuilder
-
Returns the option indicating where the attributes are read from, welding object or corresponding Design Feature.
- attributeOrigin() - Method in interface nxopen.weld.InformationBuilder
-
Returns the option indicating where the attributes are read from, welding object or corresponding Design Feature.
- AttributePropertiesBaseBuilder - Interface in nxopen
-
- AttributePropertiesBaseBuilder.BooleanValueOptions - Class in nxopen
-
The value choices for an attribute of type Boolean
- AttributePropertiesBaseBuilder.DataTypeOptions - Class in nxopen
-
Specifies the data type of the attribute, this cannot be changed once the attribute
has been created
- AttributePropertiesBaseBuilder.ObjectOptions - Class in nxopen
-
- AttributePropertiesBuilder - Interface in nxopen
-
- AttributePropertiesBuilder.OperationType - Class in nxopen
-
It is used to determine the behaviors of attributes that has been mapped from TC,
such as Hidden, Required, CopyFromOriginal, etc.
- attributeReferenceSelection() - Method in interface nxopen.routing.TransformPathBuilder
-
Returns the selection which is used to choose the object from which source object attributes
should be copied when copying attributes during a Transform Path operation.
- attributes() - Method in interface nxopen.cae.responsesimulation.RSEventBuilder
-
Returns the attributes setting
License requirements: nx_response_anlys ("NX Response Analysis")
.
- attributes() - Method in interface nxopen.cae.responsesimulation.SolutionBuilder
-
Returns the attributes setting
License requirements: nx_response_anlys ("NX Response Analysis")
.
- attributes() - Method in interface nxopen.cam.CAMFeature
-
The attributes of the machining feature .
- attributes() - Method in interface nxopen.die.AddendumSectionBuilder
-
Returns the color and string attributes of the section.
- attributes() - Method in interface nxopen.die.ClearanceBuilder
-
Returns the attribute title, value and face color to apply to the clearance faces.
- attributes() - Method in interface nxopen.die.FingerClearanceNotchBuilder
-
Returns the attribute title, value and face color to apply to the notch faces.
- attributes() - Method in interface nxopen.drafting.DrawingCreationWizardBuilder
-
Returns the attributes.
- attributes() - Method in interface nxopen.routing.RunItem
-
Returns the attributes on the Run Item.
- attributes - Variable in class nxopen.uf.UFFam.FamilyData
-
- attributes - Variable in class nxopen.uf.UFFam.IntentData
-
- attributes - Variable in class nxopen.uf.UFGdt.ProductAttribute
-
- AttributesData() - Constructor for class nxopen.mechatronics.ComparisonResultElectricalPart.AttributesData
-
- AttributeSearchTerm - Interface in nxopen.assemblies
-
- AttributeSearchTermBuilder - Interface in nxopen.assemblies
-
- AttributeSearchTermBuilder.CriteriaData - Class in nxopen.assemblies
-
- AttributeSelectionRecipe - Interface in nxopen.cae
-
Represents a Selection Recipe based on attributes.
- AttributeSelectionRecipe.UserAttributesData - Class in nxopen.cae
-
- AttributeTemplatesBuilder - Interface in nxopen
-
- AttributeTemplatesBuilder.AccessKey - Class in nxopen
-
Specifies the available access keys that determine which objects will have access to this attribute template.
- AttributeTemplatesBuilder.ConstraintOptions - Class in nxopen
-
Specifies the constraint data associated with the template.
- AttributeTemplatesBuilder.DefaultBooleanOptions - Class in nxopen
-
Specifies the default value for a template of type Boolean.
- AttributeTemplatesBuilder.TemplatesOptions - Class in nxopen
-
Specifies the templates option when setting or displaying templates.
- attributetitle - Variable in class nxopen.annotations.AssociativeText.ObjectAttributeData
-
the object attribute title
- attributetitle - Variable in class nxopen.annotations.AssociativeText.PartAttributeData
-
the part attribute title
- attributeTitle() - Method in interface nxopen.die.DieAttributesBuilder
-
Returns the title of the attribute to be applied
License requirements: None.
- attributeTitle() - Method in interface nxopen.features.ConcaveFacesBuilder
-
Returns the title if the face attribute.
- attributeTitle - Variable in class nxopen.uf.UFWeld.PopulateAttrListData
-
- attributeTitles() - Method in interface nxopen.tooling.HoleDatumSymbolBuilder
-
Returns the attribute titles
License requirements: None.
- attributeTitles() - Method in interface nxopen.tooling.ObjectAttributeManagementBuilder
-
Returns the attribute titles
License requirements: None.
- attributetype - Variable in class nxopen.features.CustomFeatureData.AllCustomAttributeNameAndTypesData
-
- attributeType - Variable in class nxopen.Part.PartFamilyAttributeData
-
Deprecated.
the attribute type
- attributeType() - Method in interface nxopen.tooling.SpecifyBaffleBuilder
-
Returns the type of attributes conversion type values.
- attributeType - Variable in class nxopen.uf.UFPd.ProductAttribute
-
- attributeType - Variable in class nxopen.uf.UFPd.ProductAttribute2
-
- attributeType() - Method in interface nxopen.weld.CharacteristicsValueBuilder
-
Returns the type of this attribute.
- attributeTypeName - Variable in class nxopen.uf.UFPd.ProductAttribute
-
- attributeTypeName - Variable in class nxopen.uf.UFPd.ProductAttribute2
-
- attributeValue() - Method in interface nxopen.die.DieAttributesBuilder
-
Returns the value given to the attribute
License requirements: None.
- attributeValue() - Method in interface nxopen.features.ConcaveFacesBuilder
-
Returns the value of the face attribute title.
- attributeValue - Variable in class nxopen.mechatronics.ElectricalPartBuilder.Attribute
-
Attribute value
- attributeValue - Variable in class nxopen.preferences.RoutingPart.PreferredPortAttributeData
-
- attributeValue() - Method in interface nxopen.routing.AttributeMembersBuilder
-
Returns the string containing attribute value to search for
License requirements: routing_base ("Routing Basic")
.
- attributeValue() - Method in interface nxopen.routing.FindByAttributesBuilder
-
Returns the string containing attribute value to search for
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- AttributeValue() - Constructor for class nxopen.uf.UFPd.AttributeValue
-
- AttributeValue(UFPd.AttributeValueType, String, int, double, String) - Constructor for class nxopen.uf.UFPd.AttributeValue
-
- AttributeValueData() - Constructor for class nxopen.uf.UFPd.AttributeValueData
-
- AttributeValueData(String, UFPd.AttributeValueString) - Constructor for class nxopen.uf.UFPd.AttributeValueData
-
- AttributeValueData2() - Constructor for class nxopen.uf.UFPd.AttributeValueData2
-
- AttributeValueData2(String, UFPd.AttributeValueString) - Constructor for class nxopen.uf.UFPd.AttributeValueData2
-
- attributevalues - Variable in class nxopen.mechatronics.ComparisonResultElectricalPart.AttributesData
-
Array of attribute values
- attributeValues() - Method in interface nxopen.tooling.HoleDatumSymbolBuilder
-
Returns the attribute values
License requirements: None.
- attributeValues() - Method in interface nxopen.tooling.ObjectAttributeManagementBuilder
-
Returns the attribute values
License requirements: None.
- AttributeValueString() - Constructor for class nxopen.uf.UFPd.AttributeValueString
-
- AttributeValueString(int, String[]) - Constructor for class nxopen.uf.UFPd.AttributeValueString
-
- attrMask - Variable in class nxopen.uf.UFSfLegend.Attr
-
- attrMask - Variable in class nxopen.uf.UFSfLegend.IndexAttr
-
- attrMask - Variable in class nxopen.uf.UFSfLegend.IndexColorAttr
-
- attrMask - Variable in class nxopen.uf.UFSfLegend.IndexTextAttr
-
- attrName() - Method in interface nxopen.mechatronics.ProxyObjectParameterBuilder
-
Returns the name of parameter attribute in proxy object
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- attrnames - Variable in class nxopen.tooling.SpreadsheetData.DefinedAttributesExpressionsData
-
- attrNames - Variable in class nxopen.uf.UFLib.AskRsetMapData
-
- attrtitles - Variable in class nxopen.diagramming.FormattedStringBuilder.ReferencedAttributesData
-
The titles of the referenced attributes
- attrType() - Method in interface nxopen.mechatronics.ProxyObjectParameterBuilder
-
Returns the data type of parameter attribute in proxy object
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- attrTypes - Variable in class nxopen.uf.UFLib.AskRsetMapData
-
- attrvalues - Variable in class nxopen.tooling.SpreadsheetData.DefinedAttributesExpressionsData
-
Array of structures with the object attributes data.
- AtvSet - Interface in nxopen.cae
-
This is the class representing a Atv result set.
- AtvSetBuilder - Interface in nxopen.cae
-
- AtvSetCollection - Interface in nxopen.cae
-
This class is a collection of
AtvSet
.
- atvSets() - Method in interface nxopen.cae.CaePart
-
- AUG - Static variable in class nxopen.DateItemBuilder.MonthOfYear
-
- AUSTRALIA_ADR1402 - Static variable in class nxopen.features.vehicledesign.MirrorCertificationBuilder.DriverSideStandardsType
-
Represents Australia : ADR 14/02 standard
- AUSTRALIA_ADR1402 - Static variable in class nxopen.features.vehicledesign.MirrorCertificationBuilder.InsideStandardsType
-
Represents Australia : ADR 14/02 standard
- AUSTRALIA_ADR1402 - Static variable in class nxopen.features.vehicledesign.MirrorCertificationBuilder.PassengerSideStandardsType
-
Represents Australia : ADR 14/02 standard
- author() - Method in interface nxopen.IgesCreator
-
Returns the author - name of the author
License requirements: None.
- AUTHOR - Static variable in class nxopen.RuleManager.LicenseType
-
- author() - Method in interface nxopen.Step203Creator
-
- author() - Method in interface nxopen.Step214Creator
-
- author() - Method in interface nxopen.StepCreator
-
Returns the author
License requirements: None.
- authorHtml(String, String, int) - Method in interface nxopen.uf.UFWeb
-
- authorization() - Method in interface nxopen.Step203Creator
-
- authorization() - Method in interface nxopen.Step214Creator
-
- authorization() - Method in interface nxopen.StepCreator
-
Returns the authorization
License requirements: None.
- AUTO - Static variable in class nxopen.cae.Post.Format
-
- AUTO - Static variable in class nxopen.cae.xyplot.AxisType
-
Automatic type
- AUTO - Static variable in class nxopen.cam.CutAngle.Types
-
Automatic
- AUTO - Static variable in class nxopen.cam.DmCmBuilder.ToolAxisGuideVectorType
-
automatic
- AUTO - Static variable in class nxopen.cam.InspectionMethodBuilder.InspectionModes
-
Auto
- AUTO - Static variable in class nxopen.cam.InspectionMoveBuilder.DepthMethodTypes
-
Auto specify
- AUTO - Static variable in class nxopen.cam.InspectionMoveBuilder.TipAngleTypes
-
Auto specify
- AUTO - Static variable in class nxopen.cam.InspectionMoveBuilder.TipModeTypes
-
Auto specify
- AUTO - Static variable in class nxopen.cam.InspectionPathBuilder.InspectModeType
-
Auto determined by application
- AUTO - Static variable in class nxopen.cam.ThreadTurningBuilder.InfeedLengthTypes
-
Auto
- AUTO - Static variable in class nxopen.cam.ThreadTurningBuilder.InfeedModes
-
Auto
- AUTO - Static variable in class nxopen.cam.TrimPoint.AngleOptions
-
Angle is calculated automatically.
- AUTO - Static variable in class nxopen.cam.TurningOperationBuilder.TrackingPointType
-
automatic
- AUTO - Static variable in class nxopen.cam.TurnToolProbingBuilder.TrackingPointTypes
-
automatic
- AUTO - Static variable in class nxopen.cam.VerticalPosition.OffsetTypes
-
Auto
- AUTO - Static variable in class nxopen.diagramming.DiagrammingSizingpolicy
-
Auto policy
- AUTO - Static variable in class nxopen.diagramming.DiagrammingStubsides
-
Auto side
- AUTO - Static variable in class nxopen.diagramming.tables.SizingMethod
-
Auto sizing method
- AUTO - Static variable in class nxopen.die.PierceItemBuilder.SizingMethodOption
-
Will calculate size at creation and during update
- AUTO - Static variable in class nxopen.fields.DisplayPropertiesBuilder.ValueRange
-
- AUTO - Static variable in class nxopen.motion.BodyContactLms.ForceModelType
-
- AUTO - Static variable in class nxopen.routing.electrical.ConnectorDevice.Assign
-
- AUTO - Static variable in class nxopen.SurfaceRebuildData.Type
-
Auto
- AUTO - Static variable in class nxopen.tooling.MWDesignPartingSurfaceBuilder.TransitionSurfaceType
-
Auto transition surface
- AUTO - Static variable in class nxopen.weld.WeldMeasurementSizeMethod
-
auto size method
- AUTO_ALIGNMENT - Static variable in class nxopen.features.shipdesign.BracketBuilder.AlignmentTypes
-
The bracket molding faces is aligned to stiffener molding face
- AUTO_BLOCK - Static variable in class nxopen.cam.GeometryGroup.BlankDefinitionTypes
-
blank defined through auto block around part
- AUTO_BLOCK_TYPE - Static variable in class nxopen.uf.UFCam.BlankGeomType
-
- AUTO_CIRCULAR - Static variable in class nxopen.cam.TurnEngageRetractBuilder.Types
-
Auto Circular
- AUTO_CORRELATION_PRESSURE - Static variable in class nxopen.cae.Result.Quantity
-
- AUTO_CREATE - Static variable in class nxopen.cae.MMCCreateBuilder.Types
-
Auto Create
- AUTO_CURVE - Static variable in class nxopen.cam.InspectionMethodBuilder.ScanCurveModeTypes
-
Autogenerate curves
- AUTO_ELLIPSE - Static variable in class nxopen.geometricutilities.ConicCrossSection.RhoMethod
-
Automatic Ellipse
- AUTO_FIT - Static variable in class nxopen.geometricutilities.CurveFitData.Method
-
Auto Fit
- AUTO_FLAG - Static variable in class nxopen.uf.UFConstants
-
- AUTO_LINEAR - Static variable in class nxopen.cam.TurnEngageRetractBuilder.Types
-
Auto Linear
- AUTO_LINKED - Static variable in class nxopen.assemblies.RelinkerBuilder.LinkType
-
Indicate relink browser type is auto-linked only
- AUTO_PHOTO_STUDIO - Static variable in class nxopen.display.TrueShadingBuilder.EnvironmentMapType
-
Automotive Lighting Reflection
- AUTO_PLACEMENT - Static variable in class nxopen.uf.UFDrf.TextArrowPlacement
-
- AUTO_ROTATION - Static variable in class nxopen.features.vehicledesign.MirrorCertificationBuilder.MirrorOrientationType
-
Represents that the mirror will be rotated automatically
- AUTO_ROUTE - Static variable in class nxopen.routing.electrical.ElectricalStockDevice.RouteTypes
-
- AUTO_ROUTE_COMP - Static variable in class nxopen.routing.DesignRuleViolationCollection.Reason
-
- AUTO_ROUTE_COMPONENT_LEVEL - Static variable in class nxopen.routing.CustomManager.DesignRuleReason
-
Called after the AutoRoute command using component level routing.
- AUTO_ROUTE_PIN - Static variable in class nxopen.routing.DesignRuleViolationCollection.Reason
-
- AUTO_ROUTE_PIN_LEVEL - Static variable in class nxopen.routing.CustomManager.DesignRuleReason
-
Called after the AutoRoute command using pin level routing.
- AUTO_SIZE_COL - Static variable in class nxopen.annotations.TableCellStyleBuilder.FitMethodType
-
- AUTO_SIZE_ROW - Static variable in class nxopen.annotations.TableCellStyleBuilder.FitMethodType
-
- AUTO_SIZE_TEXT - Static variable in class nxopen.annotations.TableCellStyleBuilder.FitMethodType
-
- autoAssignAttributes(NXObject[]) - Method in interface nxopen.IAttributeSourceObjectBuilder
-
Auto assigns the attributes for a given array of objects and returns an array of objects that failed to auto assign.
- autoAssignAttributes() - Method in interface nxopen.mechanicalrouting.PartPlacementBuilder
-
Auto assign the auto assignable attributes of all
LogicalObject
s that were created during part placement operation.
- autoAssignAttributesWithNamingPattern(NXObject[], NXObject[]) - Method in interface nxopen.IAttributeSourceObjectBuilder
-
Auto assigns the attributes for a given object and returns an array of objects that failed to auto assign.
- autoAssignConnectors(ConnectorDevice[]) - Method in interface nxopen.routing.electrical.ConnectorDeviceCollection
-
Auto assignment is done using one
of the three matching methods, Part Name, Component Name or Attribute.
- autoAssociativities() - Method in interface nxopen.annotations.BaseOrdinateDimensionBuilder
-
Returns the auto ordinate associativities
License requirements: None.
- AUTOAXIS_TEXTURE_SPACE - Static variable in class nxopen.uf.UFDisp.TextureSpaceType
-
- AutoBCBuilder - Interface in nxopen.cae
-
- autoBlockOffsetNegativeX() - Method in interface nxopen.cam.GeometryGroup
-
Returns the blank auto block offset along negative X axis
License requirements: None.
- autoBlockOffsetNegativeY() - Method in interface nxopen.cam.GeometryGroup
-
Returns the blank auto block offset along negative Y axis
License requirements: None.
- autoBlockOffsetNegativeZ() - Method in interface nxopen.cam.GeometryGroup
-
Returns the blank auto block offset along negative Z axis
License requirements: None.
- autoBlockOffsetPositiveX() - Method in interface nxopen.cam.GeometryGroup
-
Returns the blank auto block offset along positive X axis
License requirements: None.
- autoBlockOffsetPositiveY() - Method in interface nxopen.cam.GeometryGroup
-
Returns the blank auto block offset along positive Y axis
License requirements: None.
- autoBlockOffsetPositiveZ() - Method in interface nxopen.cam.GeometryGroup
-
Returns the blank auto block offset along positive Z axis
License requirements: None.
- autoBulkHeadName() - Method in interface nxopen.features.shipdesign.BulkHeadsBuilder
-
Returns the bulkHead name.
- autoCADRevision() - Method in interface nxopen.DxfdwgCreator
-
Returns the autocad revision - this will decide the revision of resultant autocad file.
- autocenter() - Method in interface nxopen.tooling.LayoutBuilder
-
Make center of cavity
License requirements: None.
- autoCentroid() - Method in interface nxopen.features.sheetmetal.SolidPunchBuilder
-
Returns the option to create centroid automatically.
- autoCentroid - Variable in class nxopen.uf.UFModl.SmpunchData
-
- autoChainOption() - Method in interface nxopen.cae.Mesh1dBuilder
-
Returns the auto chain option
License requirements: nx_masterfem ("Finite Element Modeling")
.
- autoCloseOption() - Method in interface nxopen.routing.HandrailBuilder
-
Returns an option to automatically close the handrail
License requirements: routing_platform ("Routing Platform")
.
- autoConnection() - Method in interface nxopen.ame.GeneralConnectionSettingsBuilder
-
Returns the setting for Auto-Connection between symbols
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- autoConstrain(double, double, boolean, SmartObject[], Sketch.ConstraintType[]) - Method in interface nxopen.Sketch
-
Creates Automatic Constraints on input set of geometries.
- autoCreateBoxZones(Tag, String, int[], boolean, double[], double[]) - Method in interface nxopen.uf.UFFltr
-
- AutoCreateBoxZonesData() - Constructor for class nxopen.uf.UFFltr.AutoCreateBoxZonesData
-
- autoCreateGuideLines() - Method in interface nxopen.tooling.MWDesignGuideLinesBuilder
-
Button for creating guide lines automatically at locations where there are not exactly two parting lines are connecting.
- autoCreateMeshMatingCondition(int, Tag[], double, int, int, int) - Method in interface nxopen.uf.UFSf
-
- AutoCreateMeshMatingConditionData() - Constructor for class nxopen.uf.UFSf.AutoCreateMeshMatingConditionData
-
- autoCreatePartingSurfaces() - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder
-
Method to auto create parting surfaces.
- autoCreatePlaneZones(Tag, String, int, boolean, double, double[]) - Method in interface nxopen.uf.UFFltr
-
- AutoCreatePlaneZonesData() - Constructor for class nxopen.uf.UFFltr.AutoCreatePlaneZonesData
-
- autoCreateSelectedSheets() - Method in interface nxopen.tooling.MWDefineSheetsBuilder
-
Create all the selected sheets automatically with no user interaction queries
License requirements: None.
- autoCreateSurfaceContactMesh(double, UFVariant) - Method in interface nxopen.uf.UFSf
-
- AutoCreateSurfaceContactMeshData() - Constructor for class nxopen.uf.UFSf.AutoCreateSurfaceContactMeshData
-
- autoCreateWeldFaceDefinitions() - Method in interface nxopen.cae.MeshControlBuilder
-
Auto create face definitions
License requirements: nx_masterfem ("Finite Element Modeling")
.
- AutoCyclicSymmetryPairsBuilder - Interface in nxopen.cae
-
Builds a
AutoPairs
object which represents
a recipe for generating face pairs from a selected set of faces in the
model.
- autoDeckName() - Method in interface nxopen.features.shipdesign.DecksBuilder
-
Returns the deck name.
- autoDie() - Method in interface nxopen.tooling.ToolingManager
-
Returns the AutoDieCollection instance belonging to this part .
- AutoDieCollection - Interface in nxopen.tooling
-
Represents a collection of Die Design Draw Punch
To obtain an instance of this class, refer to
ToolingManager
Created in NX8.0.0
- AutoDieGroup - Interface in nxopen.tooling
-
Represents a group for Auto Stamping Die
To obtain an instance of this class us
AutoDieCollection
Created in NX8.0.0
- AutoDimensionBuilder - Interface in nxopen.tooling
-
- AutoDimensionBuilder.MainType - Class in nxopen.tooling
-
create or edit ordinate dimension
- AutoDimensionBuilder.TextFontType - Class in nxopen.tooling
-
text font type
- AutoDimensionBuilder.TextOrientationType - Class in nxopen.tooling
-
text orientation type
- AutoDimensionBuilder.ToleranceType - Class in nxopen.tooling
-
tolerance type
- AutoDimensionBuilder.ValuePrecisionType - Class in nxopen.tooling
-
value precision type
- autoDimensionsToArcCenter() - Method in interface nxopen.preferences.SessionSketch
-
Returns the setting that controls whether or not auto-dimensions are created to arc centers.
- autoDisplayResults() - Method in interface nxopen.validate.ValidatorOptions
-
Returns the configuration of auto display results
License requirements: None.
- autofill() - Method in interface nxopen.cae.SimLoadRecipe
-
Fills the mapping tables of the load recipe based on available functions in the data sources.
- autofill(FEModelOccurrence) - Method in interface nxopen.cae.SimLoadRecipe
-
- autoFit() - Method in interface nxopen.tooling.DieEngTrimAngleCheckBuilder
-
Returns the option to indicate whether to fit or not when selecting trimming curve(s) on the trimming curve list
License requirements: None.
- autoFixFailedElementsToggle - Variable in class nxopen.uf.UFSf.UgsTetMeshParms
-
- autoFlag - Variable in class nxopen.uf.UFSket.AskLegacyPreferencesData
-
- autoFontSize - Variable in class nxopen.cae.Post.PostviewGetFontSizeData
-
- autoGen() - Method in interface nxopen.die.TrimFlangeDieAssistantBuilder
-
TODO: fill in a description for this
License requirements: ug_die_design ("Die Design")
.
- AUTOGEN - Static variable in class nxopen.uf.UFClone.NamingTechnique
-
- autoGetBoundaryBody() - Method in interface nxopen.tooling.CoolingDefineChannelBuilder
-
Gets the boundary body automatically
License requirements: None.
- autoGlobalMaxPenetrationFlag() - Method in interface nxopen.motion.BodyContactRecurdyn
-
Returns the auto global maximum penetration flag
License requirements: None.
- autogroupByMaterials() - Method in interface nxopen.cae.LaminateGlobalLayup
-
Create groups for materials
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- autogroupByMaterials() - Method in interface nxopen.cae.LaminateGlobalLayupMgr
-
Create groups for materials
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- AutoGroupErrorCodes() - Constructor for class nxopen.cae.CaeGroupCollection.AutoGroupErrorCodes
-
- AutoGroupErrorCodes(int, int, int, int, int, int, int, int, int) - Constructor for class nxopen.cae.CaeGroupCollection.AutoGroupErrorCodes
-
Constructor for the AutoGroupErrorCodes object.
- autogroupLayupsByMaterials(LaminateGlobalLayup[]) - Method in interface nxopen.cae.LaminateGlobalLayupMgr
-
Create groups for materials used in the selected layup(s)
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- autoGroups - Variable in class nxopen.cae.CaeGroupCollection.CreateAutoGroupsData
-
output array of auto created groups
- AutoGroupSeedNames() - Constructor for class nxopen.cae.CaeGroupCollection.AutoGroupSeedNames
-
- AutoGroupSeedNames(String, String, String, String, String, String, String, String) - Constructor for class nxopen.cae.CaeGroupCollection.AutoGroupSeedNames
-
Constructor for the AutoGroupSeedNames object.
- AutoGroupTypes() - Constructor for class nxopen.cae.CaeGroupCollection.AutoGroupTypes
-
- AutoGroupTypes(boolean, boolean, boolean, boolean, boolean, boolean, boolean, boolean, boolean) - Constructor for class nxopen.cae.CaeGroupCollection.AutoGroupTypes
-
Constructor for the AutoGroupTypes object.
- AutoHealGeometryBuilder - Interface in nxopen.cae
-
- autoInferWall() - Method in interface nxopen.features.BlendPocketBuilder
-
Returns the flag indicates whether infer the wall faces automatically.
- autoLevel() - Method in interface nxopen.cae.xyplot.ColorScaleStyle
-
Returns the option indicates whether to define color level automatically
License requirements: None.
- autoLocalMaxPenetrationFlag() - Method in interface nxopen.motion.BodyContactRecurdyn
-
Returns the auto local maximum penetration flag
License requirements: None.
- autolowLod() - Method in interface nxopen.JtCreator
-
Returns the autolowLOD *- Specifies wheather autoLOW LOD generation is ON or OFF
License requirements: None.
- AutoMacViewerBuilder - Interface in nxopen.cae
-
- automatchMap() - Method in interface nxopen.features.ReplaceFeatureBuilder
-
Match the map automatically
License requirements: solid_modeling ("SOLIDS MODELING")
.
- automatic() - Method in interface nxopen.annotations.DrawingFormatTitleBuilder
-
Returns the flag that determines whether or not the title block updates automatically whenever a change occurs to a referenced object in the model
License requirements: None.
- AUTOMATIC - Static variable in class nxopen.annotations.TextPlacement
-
Specifies automatic text placement
- AUTOMATIC - Static variable in class nxopen.cae.DurSpecialistSuperpositionEventBuilder.MatchingType
-
The connections are done automatically
- AUTOMATIC - Static variable in class nxopen.cae.EdgeSticherBuilder.StitchMethods
-
- AUTOMATIC - Static variable in class nxopen.cae.Mesh3dHexBuilder.Type
-
- AUTOMATIC - Static variable in class nxopen.cae.NumberFormat.FormatOption
-
The program will determine the format internally
- AUTOMATIC - Static variable in class nxopen.cae.optimization.TBSCastCondition.MiddlePlaneType
-
Automatica determinaton of the central plane
- AUTOMATIC - Static variable in class nxopen.cae.Post.Scale
-
- AUTOMATIC - Static variable in class nxopen.cae.Post.ShowHeader
-
- AUTOMATIC - Static variable in class nxopen.cae.SuppressHoleBuilder.OptionChoice
-
- AUTOMATIC - Static variable in class nxopen.cae.SweepBetweenMeshBuilder.Types
-
Deprecated.
Automatic
- AUTOMATIC - Static variable in class nxopen.cam.AreaMillingNonSteepContainment.AutoPatCenterTypes
-
Automatic
- AUTOMATIC - Static variable in class nxopen.cam.BladeCutLevels.RangeDepthTypes
-
Automatic
- AUTOMATIC - Static variable in class nxopen.cam.BoundarySet.PlaneTypes
-
automatically get a boundary plane from selected entities
- AUTOMATIC - Static variable in class nxopen.cam.BoundaryTurnMemberFineFinishCorner.Cleanup
-
- AUTOMATIC - Static variable in class nxopen.cam.CenterlineDrillTurningBuilder.StartPositionTypes
-
Start Position: Automatic
- AUTOMATIC - Static variable in class nxopen.cam.CutLevel.RangeTypes
-
Automatic
- AUTOMATIC - Static variable in class nxopen.cam.CutParametersPatternDirectionTypes
-
Automatic
- AUTOMATIC - Static variable in class nxopen.cam.DmAmBuilder.AmCustomStartTypes
-
Area Milling Custom Start Automatic
- AUTOMATIC - Static variable in class nxopen.cam.DmAmBuilder.AutoPatCenterTypes
-
Automatic
- AUTOMATIC - Static variable in class nxopen.cam.DmBndBuilder.BndCustomStartTypes
-
Boundary Milling Custom Start Automatic
- AUTOMATIC - Static variable in class nxopen.cam.DmCmBuilder.DmCmCutPointType
-
automatic
- AUTOMATIC - Static variable in class nxopen.cam.DPMItpBuilder.SelectionMethodOption
-
automatic
- AUTOMATIC - Static variable in class nxopen.cam.EditSubopCommand.PointTypes
-
Automatic
- AUTOMATIC - Static variable in class nxopen.cam.FirstPlunge.Positions
-
Automatic
- AUTOMATIC - Static variable in class nxopen.cam.FlowBuilder.FlowEditTypes
-
Automatic
- AUTOMATIC - Static variable in class nxopen.cam.GougeCheckBuilder.GougeCheckStock
-
use automatic
- AUTOMATIC - Static variable in class nxopen.cam.InitialProfilePlunge.Modes
-
Automatic
- AUTOMATIC - Static variable in class nxopen.cam.InspectionMethodBuilder.ReferenceFeatureModeTypes
-
Relative measurement to automatically created feature
- AUTOMATIC - Static variable in class nxopen.cam.InspectionSensorMassEditBuilder.SensorSelectModeType
-
Choose sensor automatically
- AUTOMATIC - Static variable in class nxopen.cam.MillOperationBuilder.WallCleanupTypes
-
wall cleanup: automatic; not valid for surface contour - boundary drive method
- AUTOMATIC - Static variable in class nxopen.cam.NcmClearanceBuilder.ClearanceTypes
-
automatic with distance for planar operations
- AUTOMATIC - Static variable in class nxopen.cam.NcmTransferBuilder.AppDepMethodTypes
-
automatic
- AUTOMATIC - Static variable in class nxopen.cam.ProbeInspectSurfacePointMoveBuilder.ToolAxis
-
Tool Axis aligned with closest machine axis
- AUTOMATIC - Static variable in class nxopen.cam.RoughFinishTurningBuilder.RegionSelectionTypes
-
Automatic cut region selection.
- AUTOMATIC - Static variable in class nxopen.cam.RoughTurningBuilder.PartOffPositionModeTypes
-
Part Off Position Mode: Automatic
- AUTOMATIC - Static variable in class nxopen.cam.SimulationOptionsBuilder.StockType
-
use automatic stock from OP
- AUTOMATIC - Static variable in class nxopen.cam.SpunOutlineGeom.CreationTypes
-
spun outline created automatically
- AUTOMATIC - Static variable in class nxopen.cam.ToolAxisAdvanced.Type
-
Automatic
- AUTOMATIC - Static variable in class nxopen.cam.ToolAxisTilt.TiltAngleTypes
-
Automatically calculate tilt angle
- AUTOMATIC - Static variable in class nxopen.cam.ToolAxisVariable.Types
-
Original VAP tool axis
- AUTOMATIC - Static variable in class nxopen.cam.TurnAvoidancePathPointsBuilder.MotionTypes
-
Motion to Point: Automatic
- AUTOMATIC - Static variable in class nxopen.cam.TurnAvoidanceReturnBuilder.ReturnPointMotionTypes
-
Motion type: Automatic to point.
- AUTOMATIC - Static variable in class nxopen.cam.TurnAvoidanceStartOfEngageBuilder.StartOfEngageMotionTypes
-
Motion type: Automatic to start of engage.
- AUTOMATIC - Static variable in class nxopen.cam.TurnFeatureGeomBuilder.CutRegionSelectionModes
-
Automatic cut region selection.
- AUTOMATIC - Static variable in class nxopen.cam.TurnRoughFinishTestCut.MeasuringPositionTypes
-
Test Cut Measuring Position: Automatic
- AUTOMATIC - Static variable in class nxopen.cam.TurnRoughFinishTestCut.StockModeTypes
-
Test Cut Stock Mode: Automatic
- AUTOMATIC - Static variable in class nxopen.cam.TurnRoughFinishTestCut.StopPositionTypes
-
Test Cut Stop Position: Automatic
- AUTOMATIC - Static variable in class nxopen.cam.TurnThreadEngageRetractBuilder.EngageRetractTypes
-
Automatic
- AUTOMATIC - Static variable in class nxopen.die.ClampingSlotBuilder.Types
-
- AUTOMATIC - Static variable in class nxopen.die.DrawBeadBuilder.TransitionDefinitionTypes
-
Shorten the bead segment that has the lowest height.
- AUTOMATIC - Static variable in class nxopen.display.FacetSettingsBuilder.FacetToViewRatio
-
Deprecated.
- AUTOMATIC - Static variable in class nxopen.drawings.ViewBoundaryBuilder.Type
-
automatic rectangle
- AUTOMATIC - Static variable in class nxopen.drawings.ViewCopyTo3dBuilder.DistanceFromViewPlaneOption
-
automatic distance calculation
- AUTOMATIC - Static variable in class nxopen.drawings.ViewCopyTo3dBuilder.Option
-
Deprecated.
automatic
- AUTOMATIC - Static variable in class nxopen.drawings.ViewCreationWizardBuilder.Option
-
By Automatic
- AUTOMATIC - Static variable in class nxopen.drawings.ViewCreationWizardBuilder.ViewBoundaryOption
-
view boundary Automatic
- AUTOMATIC - Static variable in class nxopen.features.ExtendSheetBuilder.SideEdgeShape
-
- AUTOMATIC - Static variable in class nxopen.features.PartGeometryCopyBuilder.Type
-
An option to select point, datum, sketch, body, and curve feature
- AUTOMATIC - Static variable in class nxopen.features.PasteFaceBuilder.PasteOptionType
-
determined automatically from the 'add' or 'subtract' attributes on each tool body.
- AUTOMATIC - Static variable in class nxopen.features.sheetmetal.AeroFlangeBuilder.CompType
-
Automatic
- AUTOMATIC - Static variable in class nxopen.features.shipdesign.CuttingSideFacesBuilder.Types
-
Process all the visible solids to assign the cutting side face attributes.
- AUTOMATIC - Static variable in class nxopen.features.shipdesign.InverseBendingLinesBuilder.MethodType
-
Automatic.
- AUTOMATIC - Static variable in class nxopen.gateway.ImageCaptureBuilder.CaptureMethodType
-
the automatic preview mode
- AUTOMATIC - Static variable in class nxopen.geometricutilities.FaceChangeOverflowBehavior.Option
-
Automatic
- AUTOMATIC - Static variable in class nxopen.HumanPosturePredictionBuilder.TransmissionType
-
Indicate automatic transmission
- AUTOMATIC - Static variable in class nxopen.mechatronics.CollisionBodyBuilder.ShapePropertyTypes
-
automatic
- AUTOMATIC - Static variable in class nxopen.mechatronics.CollisionSensorBuilder.ShapePropertiesOption
-
Automatic
- AUTOMATIC - Static variable in class nxopen.mechatronics.RigidBodyBuilder.MassPropertiesOption
-
automatic
- AUTOMATIC - Static variable in class nxopen.motion.LinkMassProperty.MassPropertyType
-
Mass property automatic generate
- automatic() - Method in interface nxopen.positioning.Constraint
-
Returns the flag marking the constraint as an "automatic" constraint.
- AUTOMATIC - Static variable in class nxopen.SketchAlongPathBuilder.SketchOrientationType
-
Automatic
- AUTOMATIC - Static variable in class nxopen.SketchAutoDimensionBuilder.DimType
-
Automatic dimension
- AUTOMATIC - Static variable in class nxopen.SketchDimensionalConstraint.DimensionStateType
-
Automatic dimension
- AUTOMATIC - Static variable in class nxopen.visualreporting.Classifier.GroupingMethodOption
-
Grouping is automatic
- AUTOMATIC - Static variable in class nxopen.weld.FilletBuilder.EnumExtendEdges
-
- AUTOMATIC - Static variable in class nxopen.weld.FilletBuilder.EnumExtensionMethod
-
- AUTOMATIC - Static variable in class nxopen.weld.WeldRootUpdate
-
Automatically compute the root opening
- AUTOMATIC_CALCULATION - Static variable in class nxopen.DxfdwgCreator.WidthfactorMethodOptions
-
- AUTOMATIC_CALCULATION - Static variable in class nxopen.DxfdwgImporter.AspectRatioOptions
-
- AUTOMATIC_COLOR - Static variable in class nxopen.visualreporting.GroupLabel.DisplayStyleOption
-
- AUTOMATIC_DETECTION - Static variable in class nxopen.cam.CutParametersProfileCutRegionsTypes
-
Profile cut regions: Automatic Detection
- AUTOMATIC_FREE_EDGE_TO_ALL_EDGES - Static variable in class nxopen.cae.EdgeSticherBuilder.Types
-
- AUTOMATIC_NMIF - Static variable in class nxopen.cae.PreTestExciterConfigBuilder.MethodChoiceType
-
- AUTOMATIC_PLANE - Static variable in class nxopen.cam.PlungeMillingBuilder.TransferMethodTypes
-
Previous Plane/Automatic
- AUTOMATIC_PROFILE - Static variable in class nxopen.features.sheetmetal.GussetBuilder.Types
-
Gusset(s) will be created between the planar faces adjacent to the selected bend face.
- AUTOMATIC_RECTANGLE_TYPE - Static variable in class nxopen.uf.UFDraw.BoundaryType
-
- AUTOMATIC_SELECTION - Static variable in class nxopen.cae.responsesimulation.RmsLcrEvaluationMethod
-
Automatic selection
- AUTOMATIC_SUPPORTIN_GRID_PATTERN - Static variable in class nxopen.linedesigner.PlatformEquipmentBuilder.DeckSupportTypeAPI
-
- AUTOMATIC_SURFACE_TO_SURFACE - Static variable in class nxopen.tooling.LsdynaGeometryPreparationBuilder.ContactType
-
The draw components contact type is automatic surface to surface.
- AUTOMATIC_TIGHT - Static variable in class nxopen.cae.optimization.TBSCastCondition.MiddlePlaneType
-
No holes are generated in the central plane
- AUTOMATIC_VALUES - Static variable in class nxopen.cam.TurnEngageRetractBuilder.AutoOptions
-
Automatic Values
- AUTOMATICAL_DEFINED_CAM - Static variable in class nxopen.tooling.MotionSimulationBuilder.CamDefinitionType
-
Defines cam automatically
- AUTOMATICALLY_UPDATE_WHEN_LOADING - Static variable in class nxopen.uf.UFCamPref.CamPref
-
- automaticallyCheckItemRevisions() - Method in interface nxopen.preferences.SessionNXGateway
-
Returns the automatically checking of items revision flag for I-DEAS import
License requirements: None.
- automaticallyExcludeText() - Method in interface nxopen.annotations.HatchBuilder
-
Returns the exclude text.
- automaticallyRoute(Connection.RouteLevel) - Method in interface nxopen.routing.electrical.Connection
-
Automatically routes this connection on the shortest path using the given routing level.
- automaticallySetMachingData() - Method in interface nxopen.cam.Preferences
-
Returns the auto maching data
License requirements: None.
- automaticallyStartInsert2DComponentCommand() - Method in interface nxopen.layout2d.CreateComponentFrom3DSettingsBuilder
-
Returns the settings to determines whether or not automatically start insert 2D component command
License requirements: None.
- automaticallyStartModelingApplication() - Method in interface nxopen.layout2d.AssemblyCreationSettingsBuilder
-
Returns the settings todetermines whether or not automatically start modeling application
License requirements: None.
- automaticallyUpdateWhenLoading - Variable in class nxopen.uf.UFCam.Preferences
-
- automaticAnchorPoint() - Method in interface nxopen.drawings.GeneralViewStyle
-
Returns the status of Automatic Anchor Point.
- automaticAnchorPoint() - Method in interface nxopen.drawings.ViewStyleGeneralBuilder
-
Returns the automatic anchor point toggle on the GENERAL tab of the View Style Dialog
License requirements: None.
- automaticAnchorPoint() - Method in interface nxopen.preferences.GeneralViewPreferences
-
Returns the status of Automatic anchor point
License requirements: None.
- automaticAuxiliaryFloor() - Method in interface nxopen.cam.SurfaceContourBuilder
-
Returns the Automatic Auxiliary Floor
License requirements: None.
- automaticAuxiliaryFloorDistance() - Method in interface nxopen.cam.SurfaceContourBuilder
-
Returns the Automatic Auxiliary Floor Distance
License requirements: None.
- AutomaticCenterlineBuilder - Interface in nxopen.annotations
-
- AutomaticCenterlineBuilder.CenterlineThickness - Class in nxopen.annotations
-
the types of centerline thickness
- automaticConstraintDirection() - Method in interface nxopen.features.GeometricConstraintData
-
Returns the automatic constraint direction type.
- automaticConstraintType() - Method in interface nxopen.features.GeometricConstraintData
-
Returns the automatic constraint type
License requirements: None.
- automaticCreationIntersectionSymbol() - Method in interface nxopen.annotations.DimensionWorkflowBuilder
-
Returns the automatic creation of Intersection Symbol
License requirements: None.
- automaticCustomSymbolUpdate() - Method in interface nxopen.preferences.SessionDrafting
-
Returns the automatic update drafting preferences for custom symbol
License requirements: None.
- automaticDimensionColor() - Method in interface nxopen.preferences.PartSketch
-
Returns the sketch automatic dimension color
License requirements: None.
- automaticDisplayOption() - Method in interface nxopen.cae.SmoothOptResultsBuilder
-
Returns the automatic display option
License requirements: None.
- automaticElementSize() - Method in interface nxopen.cae.ConvexMeshBuilder
-
The creation of automatic element size
License requirements: nx_masterfem ("Finite Element Modeling")
.
- automaticElementSize() - Method in interface nxopen.cae.OpenDuctMeshBuilder
-
The creation of automatic element size
License requirements: nx_masterfem ("Finite Element Modeling")
.
- automaticFitToggle() - Method in interface nxopen.tooling.PunchInsertBuilder
-
Returns the automatic fit toggle
License requirements: None.
- automaticFrozenOption() - Method in interface nxopen.cae.optimization.TBSTopologyControllerOptimizationParameters
-
Returns the automatic frozen option
License requirements: None.
- automaticLevel - Variable in class nxopen.cae.Post.Colorbar
-
- automaticMatch(boolean) - Method in interface nxopen.features.FeatureReferencesBuilder
-
This function can perform two automatic feature reference matching operations based on:
1. other reference matches;
2. parent names if match_based_on_name is true.
- automaticMode() - Method in interface nxopen.cae.DestinationCollectorBuilder
-
Returns the Automatic Mode value
License requirements: nx_masterfem ("Finite Element Modeling")
.
- AutomaticMorphBuilder - Interface in nxopen.cae
-
- AutomaticMorphBuilder.OrphanNodeMovementType - Class in nxopen.cae
-
Orphan Node Movement Method - specify how the nodes move in topologically modified region.
- automaticOption() - Method in interface nxopen.cam.TurnEngageRetractBuilder
-
Returns the Auto Engage(Retract) Option
License requirements: None.
- automaticPartBoundaryMethod() - Method in interface nxopen.cam.PlanarOperationBuilder
-
Returns the Automatic Part Boundary Method
License requirements: None.
- automaticProgression() - Method in interface nxopen.blockstyler.BodyCollector
-
Returns the AutomaticProgression
License requirements: None.
- automaticProgression() - Method in interface nxopen.blockstyler.CurveCollector
-
Returns the AutomaticProgression
License requirements: None.
- automaticProgression() - Method in interface nxopen.blockstyler.FaceCollector
-
Returns the AutomaticProgression.
- automaticProgression() - Method in interface nxopen.blockstyler.SectionBuilder
-
Returns the AutomaticProgression.
- automaticProgression() - Method in interface nxopen.blockstyler.SelectElement
-
Returns the AutomaticProgression.
- automaticProgression() - Method in interface nxopen.blockstyler.SelectFacetRegion
-
Returns the AutomaticProgression
License requirements: None.
- automaticProgression() - Method in interface nxopen.blockstyler.SelectFeature
-
Returns the AutomaticProgression
License requirements: None.
- automaticProgression() - Method in interface nxopen.blockstyler.SelectNode
-
Returns the AutomaticProgression
License requirements: None.
- automaticProgression() - Method in interface nxopen.blockstyler.SelectObject
-
Returns the AutomaticProgression
License requirements: None.
- automaticProgression() - Method in interface nxopen.blockstyler.SpecifyCSYS
-
Returns the AutomaticProgression
License requirements: None.
- automaticProgression() - Method in interface nxopen.blockstyler.SpecifyLocation
-
Returns the AutomaticProgression
License requirements: None.
- automaticProgression() - Method in interface nxopen.blockstyler.SpecifyPlane
-
Returns the AutomaticProgression
License requirements: None.
- automaticProgression() - Method in interface nxopen.blockstyler.SpecifyPoint
-
Returns the AutomaticProgression
License requirements: None.
- automaticProgression() - Method in interface nxopen.blockstyler.SpecifyVector
-
Returns the AutomaticProgression
License requirements: None.
- automaticProgression() - Method in interface nxopen.blockstyler.SuperPoint
-
Returns the AutomaticProgression
License requirements: None.
- automaticProgression() - Method in interface nxopen.blockstyler.SuperSection
-
Returns the AutomaticProgression
License requirements: None.
- automaticRouteLevel() - Method in interface nxopen.preferences.RoutingElectrical
-
Returns the level at which to automatically route a path.
- automaticRule() - Method in interface nxopen.cae.CorrelModePairingBuilder
-
Returns the automatic pairing rule
License requirements: None.
- automaticSweepBetween() - Method in interface nxopen.cae.SweepBetweenMeshBuilder
-
- AutomaticSweepBetweenSelection - Interface in nxopen.cae
-
- automaticThicknessValue() - Method in interface nxopen.cae.ThickenMeshBuilder
-
The creation of automatic thickness value
License requirements: nx_masterfem ("Finite Element Modeling")
.
- AutomaticTraceline - Interface in nxopen
-
Represents an automatic traceline.
- AutomaticTraceline.ModeOption - Class in nxopen
-
Controls the mode used when evaluating an automatic traceline
- AutomaticTraceline.SegmentConstraintsData - Class in nxopen
-
- automaticUpdate() - Method in interface nxopen.annotations.BendTableSettingsBuilder
-
Returns the automatic update option
License requirements: drafting ("DRAFTING")
.
- automaticUpdate() - Method in interface nxopen.annotations.PartsListBuilder
-
Returns the automatic update option to determine whether or not the parts list updates automatically whenever a change occurs to a referenced object in the model
License requirements: None.
- automaticUpdate() - Method in interface nxopen.annotations.TabularNoteStyleBuilder
-
Returns the automatic update
License requirements: None.
- automaticUpdate() - Method in interface nxopen.annotations.TitleBlockPreferences
-
Returns the automatic update preference
License requirements: None.
- automaticUpdate() - Method in interface nxopen.drawings.GeneralViewStyle
-
Returns the status of Automatic update, if true then position,
hidden lines, silhouettes, view bounds, section views, and
section view details updated after a model change else
the above items are not updated after a model change.
- automaticUpdate() - Method in interface nxopen.drawings.ViewStyleGeneralBuilder
-
Returns the automatic update toggle on the GENERAL tab of the View Style Dialog
License requirements: None.
- automaticUpdate() - Method in interface nxopen.layout2d.ComponentSettingsBuilder
-
Returns the flag to do automatic update or not
License requirements: None.
- automaticUpdate() - Method in interface nxopen.preferences.GeneralViewPreferences
-
Returns the status of Automatic Update. if true, then position,
hidden lines, silhouettes, view bounds, section views and
section view details are updated after a model change else
above items are not updated after a model change.
- AUTOMATION - Static variable in class nxopen.ame.AmeDebugSession.NavigatorType
-
Automation Navigator
- AUTOMATION - Static variable in class nxopen.ame.BaseEvaluatorBuilder.ContextType
-
- automationBooklet() - Method in interface nxopen.drafting.PreferencesBuilder
-
Returns the AutomationBookletBuilder builder
License requirements: None.
- AutomationBookletBuilder - Interface in nxopen.drawings
-
- AutomationLogger - Interface in nxopen.report
-
Represents the automation logger to log information for report automation program.
- automationLogger() - Method in interface nxopen.report.ReportManager
-
Returns the
AutomationLogger
belonging to the report manager
Created in NX11.0.0
- AutomationLogger.MessageType - Class in nxopen.report
-
Represents the automation logger message type.
- AutomationManager - Interface in nxopen.drafting
-
- automationManager() - Method in interface nxopen.DraftingManager
-
- AutomationManager.RemainingPartsOfBookletData - Class in nxopen.drafting
-
- AutomationPreferencesBuilder - Interface in nxopen.drafting
-
- automationRule() - Method in interface nxopen.drafting.PreferencesBuilder
-
Returns the drafting automation rule builder
License requirements: None.
- AutomationRuleBuilder - Interface in nxopen.drafting
-
- automationTemplateRegion() - Method in interface nxopen.drafting.PreferencesBuilder
-
Returns the AutomationTemplateRegion builder
License requirements: None.
- AutomationTemplateRegionBuilder - Interface in nxopen.drawings
-
- autoMidsrfFeature(Tag) - Method in interface nxopen.uf.UFModlFeatures
-
- autoMidsrfFeatureWOpts(Tag, int, double) - Method in interface nxopen.uf.UFModlFeatures
-
- AutomotiveCollection - Interface in nxopen.features
-
This class contains the factory method for creating automotive feature builder.
- automotiveCollection() - Method in interface nxopen.features.FeatureCollection
-
Returns the AutomotiveCollection instance belonging to this part .
- autoNameToggle() - Method in interface nxopen.features.shipdesign.BulkHeadsBuilder
-
Returns the auto name toggle.
- autoNameToggle() - Method in interface nxopen.features.shipdesign.DecksBuilder
-
Returns the auto name toggle
License requirements: None.
- autoNormalGen() - Method in interface nxopen.STLCreator
-
Returns the Auto Normal Gen - if set to true will generate auto normals
License requirements: None.
- autopairs() - Method in interface nxopen.cae.AutoBCBuilder
-
Returns the AutoBC's
AutoPairs
License requirements: None.
- AutoPairs - Interface in nxopen.cae
-
Represents an autopairs obj
This is a sub object
.
- AutoPairs.CreateFacePairsData - Class in nxopen.cae
-
- AutoPairsBuilder - Interface in nxopen.cae
-
Builds a
AutoPairs
object which
represets a recipe for generating face pairs from a selected set of faces
or solids in the model whose distance is less than a specified tolerance.
- AutoPoint - Interface in nxopen.weld
-
This class will automatically create weld points from selected components
To create or edit an instance of this class, use
AutoPointBuilder
Created in NX6.0.0
- AutoPointBuilder - Interface in nxopen.weld
-
- AutoPointBuilder.InterferenceDetails - Class in nxopen.weld
-
Settings to indicate whether an interference is near an existing weld point.
- AutoPointBuilder.Types - Class in nxopen.weld
-
Settings to indicate whether new features should be created, or if features will be reused.
- autoPopulateSideTwo() - Method in interface nxopen.features.MidSurfaceByFacePairsBuilder
-
Automatically populate side two faces
License requirements: solid_modeling ("SOLIDS MODELING")
.
- autoPopulateSideTwoOption() - Method in interface nxopen.features.MidSurfaceByFacePairsBuilder
-
Returns the auto populate side two faces option
License requirements: None.
- autoPosition() - Method in interface nxopen.cam.BoundaryTurnBlank
-
Returns the automatic position flag
License requirements: None.
- autoPositionOption() - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder
-
Returns the automatic position for punch, die and binder.
- autoRegenPfmOption - Variable in class nxopen.uf.UFAssem.LoadOptions
-
- autoRegenPfmOption - Variable in class nxopen.uf.UFAssem.Options
-
- autoRemoveToggle() - Method in interface nxopen.cae.MergeFaceBuilder
-
Returns the auto remove the soft vertices option
License requirements: None.
- autoRenameOnMapping() - Method in interface nxopen.ame.AspectPrefixBuilder
-
Returns the option to automatically rename AD object and its aspect names to mechanical/layout name upon mapping
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- autoResetOption() - Method in interface nxopen.cae.Mesh2dBuilder
-
Returns the auto reset geometry option.
- autoResetOption() - Method in interface nxopen.cae.Mesh3dHybridBuilder
-
Returns the auto reset geometry option.
- autoResetOption() - Method in interface nxopen.cae.Mesh3dTetBuilder
-
Returns the auto reset geometry option.
- autoReverseDuringDrag() - Method in interface nxopen.blockstyler.LinearDimension
-
Returns the AutoReverseDuringDrag.
- autoRouteAll(ElectricalStockDevice.RouteLevel, ElectricalStockDevice.AutoRouteSel) - Method in interface nxopen.routing.electrical.ElectricalStockDeviceCollection
-
Automatically routes all of the stock devices in the work part.
- autoRouteConnections(ElectricalStockDevice.RouteLevel, ElectricalStockDevice.AutoRouteSel, ElectricalStockDevice[]) - Method in interface nxopen.routing.electrical.ElectricalStockDeviceCollection
-
Automatically routes the selected stock devices.
- AutoRouteConnectionsData() - Constructor for class nxopen.routing.electrical.ElectricalStockDeviceCollection.AutoRouteConnectionsData
-
- autoroutePlugin(Connection[]) - Method in interface nxopen.routing.CustomManager.AutoroutePlugin
-
This defines the prototype for the autoroute plugin.
- autoRouteStockStyle() - Method in interface nxopen.preferences.RoutingElectrical
-
Returns the option to Auto Route using centerline stock style (i.e. none) or simple stock style.
- autoSave() - Method in interface nxopen.cam.CleanupSettings
-
Returns the Auto Save, Cleanup Geometry Settings
License requirements: None.
- autoSaveBoundary() - Method in interface nxopen.cam.OutputUncutRegions
-
Returns the auto save boundary toggle
License requirements: None.
- autoscale() - Method in interface nxopen.drawings.StandardViewsBuilder
-
Returns the autoscale mode for base view creation
License requirements: None.
- autoScale() - Method in interface nxopen.drawings.ViewCreationWizardBuilder
-
Returns the auto scale
License requirements: None.
- autoScale() - Method in interface nxopen.geometricutilities.CombOptionsBuilder
-
Returns the auto scale flag
License requirements: None.
- autoSelection() - Method in interface nxopen.cae.MMCCreateBuilder
-
- AUTOSET_MACHINING_DATA - Static variable in class nxopen.uf.UFCamPref.CamPref
-
- autoSize() - Method in interface nxopen.cae.MappedMeshBuilder
-
Auto-generated element size
License requirements: nx_masterfem ("Finite Element Modeling")
.
- autoSize() - Method in interface nxopen.cae.MeshControlBuilder
-
The calculate Auto Size method.
- autoSizeButton() - Method in interface nxopen.cae.FluidDomainBuilder
-
The calculate Auto Size method.
- autoSizeCells - Variable in class nxopen.uf.UFDraw.TabnotParams
-
- autoSizeOption() - Method in interface nxopen.cae.Mesh3dTetBuilder
-
Returns the cylinder selection
License requirements: nx_masterfem ("Finite Element Modeling")
.
- autoStartBaseView() - Method in interface nxopen.drawings.DrawingSheetBuilder
-
- autoStartViewCreation() - Method in interface nxopen.drawings.DrawingSheetBuilder
-
Returns the setting that controls whether or not the Add View creation is automatically
started after inserting a sheet that has no views on it.
- autoTarget() - Method in interface nxopen.tooling.ReusablePocketBuilder
-
Returns the flag specifying whether target is fetched automatically.
- AUTOTEST - Static variable in class nxopen.sim.SimDebugBuilder.OutputType
-
Output to autotest
- autoTextIsland() - Method in interface nxopen.annotations.HatchStyleBuilder
-
Returns the automatic text island creation flag.
- autoToggle() - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
Returns the auto mode toggle
License requirements: None.
- autoTolerance() - Method in interface nxopen.fields.SpatialMapBuilder
-
The method to set the face tolerance to a default value based on the current state of the field
License requirements: None.
- AUTOTRANSLATE - Static variable in class nxopen.uf.UFClone.NamingTechnique
-
- autoUpdate() - Method in interface nxopen.annotations.CutSheetBuilder
-
Returns the options specifies whether annotation automatically updates.
- autoUpdate() - Method in interface nxopen.annotations.PinListBuilder
-
Returns the options specifies whether annotation automatically updates.
- autoUpdate - Variable in class nxopen.uf.UFPlist.Prefs
-
- autoUpdate - Variable in class nxopen.uf.UFSmd.FpPrefs
-
- autoWallSelection() - Method in interface nxopen.cam.GeometryCiBuilder
-
Returns the auto wall selection
License requirements: None.
- AutoWeldSymbolsBuilder - Interface in nxopen.weld
-
- auxFloor() - Method in interface nxopen.cam.DmCmMultiplePassesCiBuilder
-
Returns the Use Auxiliary Floor
License requirements: cam_base ("CAM BASE")
.
- AUXILIARY_FLOOR - Static variable in class nxopen.cam.Preferences.GeometryTypes
-
auxiliary floor
- AUXILIARY_SUBTYPE - Static variable in class nxopen.uf.UFView.Subtype
-
- auxiliaryFaces() - Method in interface nxopen.features.FlatteningAndFormingBuilderEx
-
Returns the auxiliary faces that will be used to calculate the mapping of being flattened separatly and then connected to the flattened source faces
License requirements: None.
- auxiliaryFloorColor() - Method in interface nxopen.cam.Preferences
-
Returns the auxiliary floor
License requirements: None.
- auxiliaryFloorColorSelection() - Method in interface nxopen.cam.Preferences
-
- auxiliaryFloorGeometry() - Method in interface nxopen.cam.SurfaceContourBuilder
-
Returns the auxiliary floor geometry builder
License requirements: None.
- AVAILABLE - Static variable in class nxopen.tooldesigner.SelectDatumsBuilder.DatumCleanAPINames
-
- availableFontTypesAsString() - Method in interface nxopen.blockstyler.TextColorFontWidth
-
Returns the available font types.
- AvailableItemsData() - Constructor for class nxopen.mechatronics.MATLABClientBuilder.AvailableItemsData
-
- AvailableItemsData() - Constructor for class nxopen.mechatronics.OPCClientBuilder.AvailableItemsData
-
- availableMaterial() - Method in interface nxopen.annotations.MaterialSpecificationBuilder
-
Returns the revision
License requirements: None.
- availableOptions() - Method in interface nxopen.blockstyler.LineFont
-
Returns the Available Options
License requirements: None.
- availablePostScenarioDescriptors() - Method in interface nxopen.cae.PostScenarioManager
-
- AvailablePropertyNamesAndIndicesToPlotData() - Constructor for class nxopen.cae.SimBcPlotContoursBuilder.AvailablePropertyNamesAndIndicesToPlotData
-
- availableSelection() - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder
-
Returns the available feature screen selection button
License requirements: None.
- availableSelection() - Method in interface nxopen.cam.InspectionGraphicalReportBuilder
-
Returns the available objects screen selection button
License requirements: None.
- availFilterToggle() - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder
-
Returns the toggle to filter available features
License requirements: None.
- availStateEnum() - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder
-
Returns the available feature state (nominal or actual)
License requirements: None.
- AVERAGE - Static variable in class nxopen.cae.AxiSymmetricParameters.EnvVal
-
- AVERAGE - Static variable in class nxopen.cae.CyclicSymmetricParameters.EnvelopeValue
-
- AVERAGE - Static variable in class nxopen.cae.optimization.TBSShapeOptimizationParameters.DisplacementStepsize
-
Average displacement stepsize
- AVERAGE - Static variable in class nxopen.cae.Post.NodeValueSharingCriterion
-
- AVERAGE - Static variable in class nxopen.cae.Post.ValueSharingCriterion
-
- AVERAGE - Static variable in class nxopen.cae.PostGraphAcrossIterationsBuilder.CombinationMethod
-
- AVERAGE - Static variable in class nxopen.cae.PostGraphBuilder.GeometryValue
-
- AVERAGE - Static variable in class nxopen.cae.PostGraphBuilder.NodalCombination
-
- AVERAGE - Static variable in class nxopen.cae.Result.ComputationType
-
compute average
- AVERAGE - Static variable in class nxopen.cae.Result.ElementValueCriterion
-
- AVERAGE - Static variable in class nxopen.cae.ResultsManipulationBuilder.ElementValueAtNode
-
- AVERAGE - Static variable in class nxopen.cae.SimBcPlotContoursBuilder.ResolveOverlapType
-
- AVERAGE - Static variable in class nxopen.cae.SimBcXyPlotBuilder.ResolveMultipleMatches
-
- AVERAGE - Static variable in class nxopen.cam.InspectionMethodBuilder.LimitsOfSizeTypes
-
Average
- AVERAGE - Static variable in class nxopen.tooling.BlankLayoutBuilder.LeftRightSideOption
-
the left right side type of average
- AVERAGE - Static variable in class nxopen.tooling.BlankLayoutBuilder.SideWebOption
-
the side webs type of average
- AVERAGE_DOF_VALUES - Static variable in class nxopen.cae.ConflictResolutionBuilder.Rule
-
average dof values on the intersection
- AVERAGE_DOF_VALUES - Static variable in class nxopen.cae.ConstraintResolutionBuilder.Rule
-
Deprecated.
average dof values on the intersection
- AVERAGE_TEMPERATURE - Static variable in class nxopen.tooling.FlowDisplayBuilder.AnalysisResults
-
- averageAcrossAnglevalue - Variable in class nxopen.cae.Result.Averaging
-
- averageAcrossElementTypes - Variable in class nxopen.cae.Result.Averaging
-
- averageAcrossFeatangle - Variable in class nxopen.cae.Result.Averaging
-
- averageAcrossMaterialIds - Variable in class nxopen.cae.Result.Averaging
-
- averageAcrossPropertyIds - Variable in class nxopen.cae.Result.Averaging
-
- averageError - Variable in class nxopen.uf.UFModlFeatures.CreateSurfFromCloudData
-
- averagePower(double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the average power.
- averageThickness() - Method in interface nxopen.features.MidSurfaceFacePair
-
Returns the face pair data
License requirements: solid_modeling ("SOLIDS MODELING")
.
- Averaging() - Constructor for class nxopen.cae.Result.Averaging
-
- Averaging(boolean, boolean, boolean, boolean, boolean, double, boolean) - Constructor for class nxopen.cae.Result.Averaging
-
Constructor for the Averaging object.
- averaging - Variable in class nxopen.cae.Result.ResultParameters
-
Deprecated.
- AVG_DIA - Static variable in class nxopen.uf.UFGdt.ModifierTypes
-
- avgDeviation - Variable in class nxopen.uf.UFModl.CompareEntityMatch
-
- avgError - Variable in class nxopen.uf.UFCurve.FitError
-
- AVOIDANCE_TYPE_LIFT - Static variable in class nxopen.uf.UFCam.AvoidanceType
-
- AVOIDANCE_TYPE_NONE - Static variable in class nxopen.uf.UFCam.AvoidanceType
-
- AVOIDANCE_TYPE_STEPOVER - Static variable in class nxopen.uf.UFCam.AvoidanceType
-
- AVOIDANCE_TYPE_WARNING - Static variable in class nxopen.uf.UFCam.AvoidanceType
-
- avoidanceAfterLastRetract() - Method in interface nxopen.cam.NcmTurningBuilder
-
Returns the prefer direct motion after last retract
License requirements: None.
- avoidanceApproachBuilder() - Method in interface nxopen.cam.NcmTurningBuilder
-
Returns the approach path builder
License requirements: None.
- avoidanceApproachBuilder() - Method in interface nxopen.cam.TurnAvoidanceGeomBuilder
-
Returns the approach path builder
License requirements: cam_base ("CAM BASE")
.
- avoidanceBetweenRegions() - Method in interface nxopen.cam.NcmTurningBuilder
-
Returns the prefer direct motion between regions
License requirements: None.
- avoidanceClearanceBuilder() - Method in interface nxopen.cam.NcmTurningBuilder
-
Returns the clearance builder
License requirements: None.
- avoidanceClearanceBuilder() - Method in interface nxopen.cam.TurnAvoidanceGeomBuilder
-
Returns the clearance builder
License requirements: cam_base ("CAM BASE")
.
- avoidanceDepartureBuilder() - Method in interface nxopen.cam.NcmTurningBuilder
-
Returns the departure path builder
License requirements: None.
- avoidanceDepartureBuilder() - Method in interface nxopen.cam.TurnAvoidanceGeomBuilder
-
Returns the departure path builder
License requirements: cam_base ("CAM BASE")
.
- avoidanceForAutomaticEngage() - Method in interface nxopen.cam.NcmTurnRoughFinishBuilder
-
Returns the additional checking for automatic engage
License requirements: None.
- avoidanceForAutomaticRetract() - Method in interface nxopen.cam.NcmTurnRoughFinishBuilder
-
Returns the additional checking for automatic retract
License requirements: None.
- avoidanceForMinimumClearance() - Method in interface nxopen.cam.NcmTurnRoughFinishBuilder
-
Returns the additional checking for minimum clearance
License requirements: None.
- avoidanceFromBuilder() - Method in interface nxopen.cam.NcmTurningBuilder
-
Returns the avoidance from builder
License requirements: None.
- avoidanceFromBuilder() - Method in interface nxopen.cam.TurnAvoidanceGeomBuilder
-
Returns the avoidance from builder
License requirements: cam_base ("CAM BASE")
.
- avoidanceGohomeBuilder() - Method in interface nxopen.cam.NcmTurningBuilder
-
Returns the gohome point builder
License requirements: None.
- avoidanceGohomeBuilder() - Method in interface nxopen.cam.TurnAvoidanceGeomBuilder
-
Returns the gohome point builder
License requirements: cam_base ("CAM BASE")
.
- avoidanceMethod() - Method in interface nxopen.cam.ToolPathTiltAvoidance
-
Returns the avoidance method
License requirements: None.
- avoidanceReturnBuilder() - Method in interface nxopen.cam.NcmTurningBuilder
-
Returns the return path builder
License requirements: None.
- avoidanceReturnBuilder() - Method in interface nxopen.cam.TurnAvoidanceGeomBuilder
-
Returns the return path builder
License requirements: cam_base ("CAM BASE")
.
- avoidanceStartBuilder() - Method in interface nxopen.cam.NcmTurningBuilder
-
Returns the avoidance start builder
License requirements: None.
- avoidanceStartBuilder() - Method in interface nxopen.cam.TurnAvoidanceGeomBuilder
-
Returns the start point builder
License requirements: cam_base ("CAM BASE")
.
- avoidanceStartOfEngageBuilder() - Method in interface nxopen.cam.NcmTurningBuilder
-
Returns the start of engage builder
License requirements: None.
- avoidanceStartOfEngageBuilder() - Method in interface nxopen.cam.TurnAvoidanceGeomBuilder
-
Returns the start of engage builder
License requirements: cam_base ("CAM BASE")
.
- avoidanceToStartOfEngage() - Method in interface nxopen.cam.NcmTurningBuilder
-
Returns the prefer direct motion to start of engage
License requirements: None.
- avoidanceType - Variable in class nxopen.uf.UFCamgeom.AppData
-
- avoidUsedNXLayers() - Method in interface nxopen.DxfdwgImporter
-
Returns the AvoidUsedNXLayers command - if set to true, the destination part layers will not be used
License requirements: None.
- AWAY - Static variable in class nxopen.annotations.CuttingPlaneSymbolBuilder.ArrowDirectionOption
-
The Direction of the PMI Cutting Plane Symbol Arrow Away From Plane.
- AWAY - Static variable in class nxopen.cam.GuidedCurveCutOrder.CutOrderOption
-
- AWAY_FROM - Static variable in class nxopen.cam.ToolPathTiltTilting.ToolAxisTiltingRuleTypes
-
Tool tilting rule away from
- AWAY_FROM - Static variable in class nxopen.positioning.ComponentConstraint.DirectionToFixed
-
Away from fixed geometry
- AWAY_FROM_CORNER - Static variable in class nxopen.cam.ProfileStrategy.Types
-
Profile strategy: Away from Corner
- AWAY_FROM_CURVE - Static variable in class nxopen.cam.ToolAxisTilt.Types
-
Tilt away from curve
- AWAY_FROM_LINE - Static variable in class nxopen.cam.SurfaceContourBuilder.AccessVectorMethodType
-
away from the vector defined
- AWAY_FROM_LINE - Static variable in class nxopen.cam.ToolAxisVariable.Types
-
Away from Line
- AWAY_FROM_PART - Static variable in class nxopen.cam.ToolAxisTilt.Types
-
Tilt away from part
- AWAY_FROM_POINT - Static variable in class nxopen.cam.ToolAxisTilt.Types
-
Tilt away from point
- AWAY_FROM_POINT - Static variable in class nxopen.cam.ToolAxisVariable.Types
-
Away from Point
- AWAYFROM_HEADSTOCK - Static variable in class nxopen.cam.BoundaryTurnBlank.Position
-
- AWAYFROM_VIEW - Static variable in class nxopen.annotations.ShipDraftingFramebarGeneralBuilder.TicDirectionTypes
-
- AX - Static variable in class nxopen.cae.responsesimulation.DirectionDataComponent
-
- axes() - Method in interface nxopen.BasePart
-
Returns the AxisCollection instance belonging to this part .
- AxesAndMachineEventsData() - Constructor for class nxopen.mechatronics.RuntimeNCBuilder.AxesAndMachineEventsData
-
- AXIAL - Static variable in class nxopen.cae.DurabilityStressAxesBuilder.BeamStressEnum
-
Axial
- AXIAL - Static variable in class nxopen.cae.Result.Component
-
- AXIAL - Static variable in class nxopen.cam.BoundaryTurnMemberOffset.MethodType
-
- AXIAL - Static variable in class nxopen.cam.NcmHoleMachining.OverlapTypes
-
axial
- AXIAL - Static variable in class nxopen.cam.RoughFinishTurningBuilder.MinmaxSizeModes
-
Axial
- AXIAL - Static variable in class nxopen.cam.TeachmodeLinearMoveBuilder.MoveTypes
-
Axial only
- AXIAL - Static variable in class nxopen.cam.TrimPlane.Content
-
axial.
- AXIAL - Static variable in class nxopen.cam.TurnMoveToPointBuilder.DirectionTypes
-
axial
- AXIAL - Static variable in class nxopen.cam.TurnProbeInspectPointMoveBuilder.DirectionTypes
-
Axial
- AXIAL - Static variable in class nxopen.cam.TurnRoughFinishTestCut.CutTypes
-
Test Cut Type: Axial
- axial() - Method in interface nxopen.sim.KinematicChain
-
Returns the axial axis of the kinematic chain
License requirements: None.
- AXIAL3D - Static variable in class nxopen.features.OffsetCurveBuilder.Types
-
3D Axial
- AXIAL_AND_RADIAL - Static variable in class nxopen.cam.RoughFinishTurningBuilder.MinmaxSizeModes
-
Axial and Radial
- AXIAL_OR_RADIAL - Static variable in class nxopen.cam.FirstPlunge.Positions
-
Axial Radial
- AXIAL_OR_RADIAL - Static variable in class nxopen.cam.InitialProfilePlunge.Modes
-
Axial Radial
- AXIAL_RADIAL - Static variable in class nxopen.cam.NcmTurnThreadBuilder.LocalReturnTypes
-
Axial-Radial
- AXIAL_RADIAL - Static variable in class nxopen.cam.ProbeProtectedParametersBuilder.AppMethodTypes
-
axial and then radial
- AXIAL_RADIAL - Static variable in class nxopen.cam.TeachmodeLinearMoveBuilder.MoveTypes
-
Axial then Radial
- AXIAL_RADIAL - Static variable in class nxopen.cam.TurnMoveToPointBuilder.DirectionTypes
-
axial radial
- AXIAL_RADIAL - Static variable in class nxopen.cam.TurnRoughFinishLocalReturnBuilder.ReturnMoveModeTypes
-
Return Move: Axial-Radial
- AXIAL_RADIAL - Static variable in class nxopen.cam.TurnRoughFinishTestCut.ReturnMoveTypes
-
Test Cut Return Move: Axial -> Radial
- AXIAL_RADIAL_WITH_CLEARANCE - Static variable in class nxopen.cam.ProbeProtectedParametersBuilder.AppMethodTypes
-
axial and then radial from/to clearance
- AXIAL_STRAIN - Static variable in class nxopen.cae.Result.Quantity
-
- AXIAL_STRESS - Static variable in class nxopen.cae.Result.Quantity
-
- AXIAL_THEN_RADIAL - Static variable in class nxopen.cam.TurnAvoidanceGohomeBuilder.GohomePointMotionTypes
-
Motion type: Axial then axial to point.
- AXIAL_THEN_RADIAL - Static variable in class nxopen.cam.TurnAvoidancePathPointsBuilder.MotionTypes
-
Motion to Point: Axial then Radial
- AXIAL_THEN_RADIAL - Static variable in class nxopen.cam.TurnAvoidanceReturnBuilder.ReturnPointMotionTypes
-
Motion type: Axial then axial to point.
- AXIAL_THEN_RADIAL - Static variable in class nxopen.cam.TurnAvoidanceStartBuilder.StartPointMotionTypes
-
Motion type: Axial then axial to point.
- AXIAL_THEN_RADIAL - Static variable in class nxopen.cam.TurnAvoidanceStartOfEngageBuilder.StartOfEngageMotionTypes
-
Motion type: Axial then radial to start of engage.
- axialCoordinate() - Method in interface nxopen.cam.FirstPlunge
-
Returns the axial coordinate
License requirements: None.
- axialCoordinate() - Method in interface nxopen.cam.InitialProfilePlunge
-
Returns the axial coordinate
License requirements: None.
- axialDistance() - Method in interface nxopen.cam.BoundaryTurnMemberOffset
-
Returns the offset axial distance
License requirements: None.
- axialDistance() - Method in interface nxopen.cam.CylinderMillingBuilder
-
Returns the distance builder for Depth per Revolution
License requirements: None.
- axialOffsetDirection() - Method in interface nxopen.features.OffsetCurveBuilder
-
Returns the direction
License requirements: None.
- axialPercent() - Method in interface nxopen.cam.InspectionProbeTrackingBuilder
-
Returns the axial percentage
License requirements: None.
- axialPlaneMode() - Method in interface nxopen.cam.TurnAvoidanceClearanceBuilder
-
Returns the axial plane mode
License requirements: None.
- axialPlaneMode() - Method in interface nxopen.cam.TurnProbeClearanceBuilder
-
Returns the axial plane mode
License requirements: None.
- axialPlanePoint() - Method in interface nxopen.cam.TurnAvoidanceClearanceBuilder
-
Returns the axial plane point
License requirements: None.
- axialPlanePoint() - Method in interface nxopen.cam.TurnProbeClearanceBuilder
-
Returns the axial plane point
License requirements: None.
- axialPlaneValue() - Method in interface nxopen.cam.TurnAvoidanceClearanceBuilder
-
Returns the axial plane value
License requirements: None.
- axialPlaneValue() - Method in interface nxopen.cam.TurnProbeClearanceBuilder
-
Returns the axial plane value
License requirements: None.
- axialSafeClearance() - Method in interface nxopen.cam.NcmTurnRoughFinishBuilder
-
Returns the axial safe clearance value
License requirements: None.
- axialSafeClearance() - Method in interface nxopen.cam.TeachmodeProfileMoveBuilder
-
Returns the axial safe clearance value
License requirements: None.
- axialStepover() - Method in interface nxopen.cam.Cycle
-
Returns the axial stepover
License requirements: None.
- axialStepover() - Method in interface nxopen.cam.CylindricalMillingBuilder
-
Returns the Axial Stepover builder
License requirements: None.
- axialStepover() - Method in interface nxopen.cam.GrooveMillingBuilder
-
Returns the Axial Stepover
License requirements: None.
- axialTrimPlane1() - Method in interface nxopen.cam.RoughFinishTurningBuilder
-
Returns the axial trim plane 1
License requirements: None.
- axialTrimPlane1Builder() - Method in interface nxopen.cam.TurnFeatureGeomBuilder
-
Returns the axial trim plane 1
License requirements: cam_base ("CAM BASE")
.
- axialTrimPlane2() - Method in interface nxopen.cam.RoughFinishTurningBuilder
-
Returns the axial trim plane 2
License requirements: None.
- axialTrimPlane2Builder() - Method in interface nxopen.cam.TurnFeatureGeomBuilder
-
Returns the axial trim plane 2
License requirements: cam_base ("CAM BASE")
.
- axiOptions() - Method in interface nxopen.cae.AxiSymmetricParameters
-
Returns the options enum
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- axis() - Method in interface nxopen.annotations.BaseFrameBarBuilder
-
Returns the axis
License requirements: None.
- Axis - Interface in nxopen
-
Represents an
Axis
class.
- axis() - Method in interface nxopen.cae.ElementExtrudeBuilder
-
Returns the axis.
- axis() - Method in interface nxopen.cae.ElementRevolveBuilder
-
Returns the axis of revolution
License requirements: None.
- axis() - Method in interface nxopen.cae.ElementRotateBuilder
-
Returns the axis.
- axis() - Method in interface nxopen.cae.MorphRevolvedMeshBuilder
-
Returns the axis of revolution
License requirements: None.
- axis() - Method in interface nxopen.cae.NodeRotateBuilder
-
Returns the axis
License requirements: None.
- axis() - Method in interface nxopen.cae.optimization.TBSTopologyLinkCondition
-
Returns the axis of symmetry coordinate system
License requirements: None.
- AXIS - Static variable in class nxopen.cae.PropertyTable.PropertyType
-
- AXIS - Static variable in class nxopen.cam.DisplayTool.ToolDisplayTypes
-
Tool Display: Axis
- axis() - Method in interface nxopen.cam.InspectionProbeTrackingBuilder
-
Returns the stem axis
License requirements: None.
- AXIS - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.ParamSubType
-
Axis
- axis() - Method in interface nxopen.cam.NcmClearanceBuilder
-
Returns the clearance cylinder axis
License requirements: None.
- AXIS - Static variable in class nxopen.cam.OperationDisplayOptionsBuilder.ToolDisplayTypes
-
Tool Display: Axis
- axis() - Method in interface nxopen.cam.ProbeTrackingBuilder
-
Returns the stem axis
License requirements: None.
- axis() - Method in interface nxopen.cam.WedmPointDefinitionBuilder
-
Returns the wire axis
License requirements: cam_base ("CAM BASE")
.
- Axis - Class in nxopen.diagramming
-
Represents the axis type.
- axis() - Method in interface nxopen.drawings.ViewProjectionPlaneBuilder
-
Returns the axis, define the vector and the point from which to infer the plane
License requirements: None.
- axis() - Method in interface nxopen.features.ConeBuilder
-
Returns the axis
License requirements: None.
- axis() - Method in interface nxopen.features.CylinderBuilder
-
Returns the axis
License requirements: None.
- AXIS - Static variable in class nxopen.features.MatchedReferenceBuilder.Types
-
axis
- axis() - Method in interface nxopen.features.MoveFaceBuilder
-
Returns the axis for axis and angle option, don't use it until nx502
License requirements: None.
- axis() - Method in interface nxopen.features.PatternFaceBuilder
-
Returns the axis of circular pattern, don't use it until nx502
License requirements: None.
- axis() - Method in interface nxopen.features.RevolveBuilder
-
Returns the revolve axis
License requirements: None.
- AXIS - Static variable in class nxopen.features.shipdesign.OrientationPointMethodsBuilder.MeasureAlongTypes
-
The distance is measured along the orthogonal direction closest to the landing curve tangent direction.
- AXIS - Static variable in class nxopen.mechatronics.GraphControlBuilder.MasterType
-
Axis
- axis() - Method in interface nxopen.routing.IAxisPort
-
Returns the axis that defines the port
License requirements: routing_base ("Routing Basic")
.
- axis - Variable in class nxopen.sim.KinematicConfigurator.FindAxisData
-
The axis, if found
- axis() - Method in interface nxopen.SketchAlongPathBuilder
-
Returns the horizontal reference
License requirements: None.
- axis() - Method in interface nxopen.SketchInPlaceBuilder
-
- axis - Variable in class nxopen.uf.UFModlFeatures.AskCircularPatternFaceData
-
- axis - Variable in class nxopen.uf.UFModlFeatures.AskRectangularPatternFaceData
-
- Axis.Types - Class in nxopen
-
Defines types of axes based on their associativity
- AXIS2 - Static variable in class nxopen.cam.ProbeInspectSurfacePointMoveBuilder.Measurement
-
2 Axis
- AXIS3 - Static variable in class nxopen.cam.ProbeInspectSurfacePointMoveBuilder.Measurement
-
3 Axis
- AXIS_DIAMETER_AND_HEIGHT - Static variable in class nxopen.features.CylinderBuilder.Types
-
Axis, Diameter and Height
- AXIS_INTERSECTION - Static variable in class nxopen.annotations.FeatureControlFrameBuilder.FcfCharacteristic
-
axis intersection
- AXIS_INTERSECTION - Static variable in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.CharacteristicOptions
-
axis intersection
- AXIS_LAST_ELEMENT - Static variable in class nxopen.uf.UFPath.Axis
-
- AXIS_MOVEMENT - Static variable in class nxopen.ame.MountingInterfaceBuilder.ReceptaclePolicy
-
- AXIS_NONE - Static variable in class nxopen.uf.UFPath.Axis
-
- AXIS_ROT_ALWAYS_CCLW - Static variable in class nxopen.uf.UFSim.AxisRotDirType
-
- AXIS_ROT_ALWAYS_CLW - Static variable in class nxopen.uf.UFSim.AxisRotDirType
-
- AXIS_ROT_ALWAYS_SHORTEST - Static variable in class nxopen.uf.UFSim.AxisRotDirType
-
- AXIS_ROT_MAGNITUDE_DETERMINES_DIRECTION - Static variable in class nxopen.uf.UFSim.AxisRotDirType
-
- AXIS_ROT_NONE - Static variable in class nxopen.uf.UFSim.AxisRotDirType
-
- AXIS_ROT_SIGN_DETERMINES_DIRECTION - Static variable in class nxopen.uf.UFSim.AxisRotDirType
-
- AXIS_SYMMETRY3D - Static variable in class nxopen.cae.Post.Target
-
- AxisCollection - Interface in nxopen
-
Represents a collection of
Axis
.
- axisColor() - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
Returns the axis color
License requirements: None.
- axisControl - Variable in class nxopen.tooling.SIZERExportBuilder.MCDMechanicalData
-
Axis Control
- AxisDBScale - Class in nxopen.cae.xyplot
-
Represents the DB scale for plot
- axisDefinitions - Variable in class nxopen.uf.UFAssem.McArrayData
-
- AxisDirection - Class in nxopen.cae.xyplot
-
Represents the axis direction
- axisDirection - Variable in class nxopen.uf.UFModl.SymbThreadData
-
- axisDirectionI() - Method in interface nxopen.cam.InspectionConeFeatureBuilder
-
Returns the axis direction vector I component
License requirements: None.
- axisDirectionI() - Method in interface nxopen.cam.InspectionCylinderFeatureBuilder
-
Returns the axis direction vector I component
License requirements: None.
- axisDirectionI() - Method in interface nxopen.cam.InspectionTorusFeatureBuilder
-
Returns the axis direction vector i component
License requirements: None.
- axisDirectionJ() - Method in interface nxopen.cam.InspectionConeFeatureBuilder
-
Returns the axis direction vector J component
License requirements: None.
- axisDirectionJ() - Method in interface nxopen.cam.InspectionCylinderFeatureBuilder
-
Returns the axis direction vector J component
License requirements: None.
- axisDirectionJ() - Method in interface nxopen.cam.InspectionTorusFeatureBuilder
-
Returns the axis direction vector j component
License requirements: None.
- axisDirectionK() - Method in interface nxopen.cam.InspectionConeFeatureBuilder
-
Returns the axis direction vector K component
License requirements: None.
- axisDirectionK() - Method in interface nxopen.cam.InspectionCylinderFeatureBuilder
-
Returns the axis direction vector K component
License requirements: None.
- axisDirectionK() - Method in interface nxopen.cam.InspectionTorusFeatureBuilder
-
Returns the axis direction vector k component
License requirements: None.
- axisDirectionSearchMethod() - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder
-
Returns the axis direction search method.
- axisExtrapolation() - Method in interface nxopen.cam.InspectionAnalyzeBuilder
-
Returns the analysis axis extrapolation type
License requirements: None.
- axisExtrapolationMode() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns the analysis axis extrapolation mode
License requirements: None.
- axisExtrapolationModeBuilder() - Method in interface nxopen.cam.InspectionConeFeatureBuilder
-
Returns the Axis Extrapolation Mode Builder
License requirements: None.
- axisExtrapolationModeBuilder() - Method in interface nxopen.cam.InspectionCylinderFeatureBuilder
-
Returns the Axis Extrapolation Mode Builder
License requirements: None.
- AxisItemStyle - Interface in nxopen.cae.xyplot
-
Represents the axis item display style.
- axisJoint() - Method in interface nxopen.mechatronics.ForceTorqueControlBuilder
-
Returns the joint select.
- axisJoint() - Method in interface nxopen.mechatronics.HydraulicCylinderBuilder
-
Returns the Axis Joint.
- axisJoint() - Method in interface nxopen.mechatronics.PneumaticCylinderBuilder
-
Returns the Axis Joint.
- axisJoint() - Method in interface nxopen.mechatronics.PositionControlBuilder
-
Returns the joint select.
- axisJoint() - Method in interface nxopen.mechatronics.PositionSensorBuilder
-
Returns the joint select.
- axisJoint() - Method in interface nxopen.mechatronics.SpeedControlBuilder
-
Returns the joint select.
- axisJoint() - Method in interface nxopen.mechatronics.SpringDamperBuilder
-
Returns the joint select.
- axisJoint() - Method in interface nxopen.mechatronics.VelocitySensorBuilder
-
Returns the joint select.
- axisLabel() - Method in interface nxopen.cae.AfuAbscissaHeaderInfo
-
Returns the customized axis label
License requirements: None.
- axisLabel() - Method in interface nxopen.cae.AfuOrdinateHeaderInfo
-
Returns the customized axis label
License requirements: None.
- AxisLabelStyle - Interface in nxopen.cae.xyplot
-
Represents the axis label display style.
- AxisModel - Interface in nxopen.cae.xyplot
-
Represents an axis model object on a XY graphing.
- AxisModel.CalculateZoomScaleData - Class in nxopen.cae.xyplot
-
- AxisModel.DisplayLimitsData - Class in nxopen.cae.xyplot
-
- axisNameList - Variable in class nxopen.uf.UFSim.AskNcAxesOfMtoolData
-
- axisnames - Variable in class nxopen.mechatronics.RuntimeNCBuilder.AxesAndMachineEventsData
-
The axis names which involved in CSE motion.
- AXISOF_HOLE - Static variable in class nxopen.tooling.DieEngDefineProductOrientationBuilder.OptimalMethod
-
- axisOfRotation() - Method in interface nxopen.cam.MultiBladeGeomBuilder
-
Returns the axis of rotation mode
License requirements: None.
- axisOfRotation() - Method in interface nxopen.cam.PartAxisBuilder
-
Returns the axis of rotation type
License requirements: None.
- axisOfRotation() - Method in interface nxopen.cam.RotaryFinishGeomBuilder
-
Returns the axis of rotation mode
License requirements: None.
- axisOption() - Method in interface nxopen.cam.WedmPointDefinitionBuilder
-
Returns the wire axis status
License requirements: cam_base ("CAM BASE")
.
- axisOption() - Method in interface nxopen.geometricutilities.OrientXpressBuilder
-
Returns the orientXpress active axis option
License requirements: None.
- AxisOrientation - Class in nxopen
-
Specifies axis orientation .
- axisOrientation() - Method in interface nxopen.SketchInPlaceBuilder
-
Returns the reference axis orientation (horizontal or vertical)
License requirements: None.
- axisOrientationInfer() - Method in interface nxopen.SketchInPlaceBuilder
-
Returns the reference axis orientation (horizontal or vertical)
License requirements: None.
- axisPoint() - Method in interface nxopen.features.subdivision.SubdivisionRevolveBuilder
-
Returns the origin of the axis of revolution.
- axisPoint() - Method in interface nxopen.features.ToolingBoxBuilder
-
Returns the point on the axis of the bounded cylinder
License requirements: None.
- axisReference() - Method in interface nxopen.SketchInPlaceBuilder
-
Returns the reference axis for sketch
License requirements: None.
- axisSearchCollection() - Method in interface nxopen.cae.DurabilityManager
-
Returns the durability axis search collection belonging to this sim part.
- AxisStyleSetting - Interface in nxopen.cae.xyplot
-
Represents the axis display style.
- AxisStyleSetting.FixedLimitsData - Class in nxopen.cae.xyplot
-
- axisType() - Method in interface nxopen.cae.xyplot.AxisStyleSetting
-
Returns the axis scale type
License requirements: None.
- AxisType - Class in nxopen.cae.xyplot
-
Represents the type of scale for X or Y axis
- axisType() - Method in interface nxopen.mechatronics.ForceTorqueControlBuilder
-
Returns a value that indicates which type of axis joint.
- axisType() - Method in interface nxopen.mechatronics.GearBuilder
-
Returns the axis joint type.
- axisType() - Method in interface nxopen.mechatronics.PositionControlBuilder
-
Returns the axis type.
- axisType() - Method in interface nxopen.mechatronics.PositionSensorBuilder
-
Returns the axis type.
- axisType() - Method in interface nxopen.mechatronics.SpeedControlBuilder
-
Returns the axis joint type.
- axisType() - Method in interface nxopen.mechatronics.SpringDamperBuilder
-
Returns the axis joint type.
- axisType() - Method in interface nxopen.mechatronics.ThreeJointCouplerBuilder
-
Returns the axis joint type.
- axisType() - Method in interface nxopen.mechatronics.VelocitySensorBuilder
-
Returns the axis type.
- axisType() - Method in interface nxopen.mechatronics.VirtualAxisBuilder
-
Returns the axis type
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- axisType() - Method in interface nxopen.motion.JointDefine
-
Returns the axis type.
- axisTypeEnum() - Method in interface nxopen.formboard.FlipComponentBuilder
-
- axisVector() - Method in interface nxopen.cam.InspectionConeFeatureBuilder
-
Returns the cones axis vector
License requirements: None.
- axisVector() - Method in interface nxopen.cam.InspectionCylinderFeatureBuilder
-
Returns the cylinders axis vector
License requirements: None.
- axisVector() - Method in interface nxopen.features.subdivision.SubdivisionRevolveBuilder
-
Returns the axis of revolution.
- axisVector() - Method in interface nxopen.features.ToolingBoxBuilder
-
Returns the cylinder axis vector to create the bounded cylinder
License requirements: None.
- axisVector() - Method in interface nxopen.mechatronics.CurveOnCurveJointBuilder
-
Returns the axis vector which is tangent to the connected curve at the selected point
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- axisVector() - Method in interface nxopen.mechatronics.CylindricalJointBuilder
-
Returns the axis vector.
- axisVector() - Method in interface nxopen.mechatronics.HingeJointBuilder
-
Returns the axis vector.
- axisVector() - Method in interface nxopen.mechatronics.PathConstraintJointBuilder
-
Returns the axis vector which is tangent to the path curve at the selected point
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- axisVector() - Method in interface nxopen.mechatronics.PlanarJointBuilder
-
Returns a value that specifies axis vector.
- axisVector() - Method in interface nxopen.mechatronics.PointOnCurveJointBuilder
-
Returns the axis vector which is tangent to the connected curve at the selected point
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- axisVector() - Method in interface nxopen.mechatronics.ScrewJointBuilder
-
Returns a value that specifies axis vector.
- axisVector() - Method in interface nxopen.mechatronics.TransportSurfaceBuilder
-
Returns the specify axis vector.
- axisVector() - Method in interface nxopen.tooling.StockSizeBuilder
-
Returns the cylinder axis vector to calculate cylinder stock szie
License requirements: None.
- axisymAxis - Variable in class nxopen.cae.Post.Axisymmetric
-
- Axisymmetric() - Constructor for class nxopen.cae.Post.Axisymmetric
-
- Axisymmetric(int, double, Post.AxisymetricAxis) - Constructor for class nxopen.cae.Post.Axisymmetric
-
Constructor for the Axisymmetric object.
- AXISYMMETRIC - Static variable in class nxopen.features.ScaleBuilder.Types
-
axisymmetric scaling
- AXISYMMETRIC_WORST_PRINCIPAL_STRAIN - Static variable in class nxopen.cae.Result.Quantity
-
- AXISYMMETRIC_WORST_PRINCIPAL_STRESS - Static variable in class nxopen.cae.Result.Quantity
-
- AXISYMMETRIC_X - Static variable in class nxopen.cae.modelcheck.TestValueTypes.TestType
-
When elements are modeled in XZ plane,
check X >= 0.0.
- AXISYMMETRIC_Y - Static variable in class nxopen.cae.modelcheck.TestValueTypes.TestType
-
When elements are modeled in XZ plane,
check consistent Y.
- AxiSymmetricParameters - Interface in nxopen.cae
-
Implementation of axi-symmetry utility
To obtain an instance of this class use.
- AxiSymmetricParameters.AxisOfRotation - Class in nxopen.cae
-
Axis of rotation
- AxiSymmetricParameters.EnvVal - Class in nxopen.cae
-
Envelope Values
- AxiSymmetricParameters.GetResult - Class in nxopen.cae
-
Axi Symmetric result type
- AxiSymmetricParameters.Options - Class in nxopen.cae
-
Result Values
- AxisYStyleSetting - Interface in nxopen.cae.xyplot
-
Represents the axis y display style.
- AZURE_AZURE_BLUE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- AZURE_AZURE_CYAN_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-