nxopen.cam

Interface InspectionConstructedFeatureBuilder

All Superinterfaces:

Builder, IComponentBuilder, OperationBuilder, ParamBuilder, Remote, TaggedObject

public interface InspectionConstructedFeatureBuilder
extends OperationBuilder

Represents a CMM Inspection Constructed Feature Builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionConstructedFeatureBuilder(nxopen.cam.CAMObject)

Created in NX7.0.0

Nested Class Summary

Nested Classes

Modifier and Type	Interface and Description
static class	InspectionConstructedFeatureBuilder.AvailableStateType State of features in available feature list
static class	InspectionConstructedFeatureBuilder.ConstFeatType Type of feature to be constructed
static class	InspectionConstructedFeatureBuilder.CurrentStateType State of features in current feature list
static class	InspectionConstructedFeatureBuilder.DesignCreationType Design feature creation types
static class	InspectionConstructedFeatureBuilder.DestPcsEnumType Specifies if the destination PCS is the current PCS or a user specified nominal or actual PCS
static class	InspectionConstructedFeatureBuilder.DirectionType Specifies whether a minimum or maximum point are found using a user specified direction vector or a radial direction vector
static class	InspectionConstructedFeatureBuilder.ExtractEdgeDistanceType Specifies whether an extract edge distance is absolute part units or a percentage
static class	InspectionConstructedFeatureBuilder.MethodEnumType Construction Method
static class	InspectionConstructedFeatureBuilder.SubFeat1StateType State of subfeatures
static class	InspectionConstructedFeatureBuilder.SubFeat2StateType State of subfeatures

Nested classes/interfaces inherited from interface nxopen.cam.OperationBuilder

OperationBuilder.HoleAxisTypes, OperationBuilder.HoleDepthTypes, OperationBuilder.OptimizationBasedOnTypes, OperationBuilder.OptimizationDistanceTypes, OperationBuilder.OptimizationLevelTypes

Nested classes/interfaces inherited from interface nxopen.cam.ParamBuilder

ParamBuilder.OptimizationTypes

Method Summary

Modifier and Type	Method and Description
SelectNXObjectList	availableSelection() Returns the available feature screen selection button License requirements: None.
boolean	availFilterToggle() Returns the toggle to filter available features License requirements: None.
InspectionConstructedFeatureBuilder.AvailableStateType	availStateEnum() Returns the available feature state (nominal or actual) License requirements: None.
String	constName() Returns the constructed feature name License requirements: None.
void	createNominal() The button used to create the nominal constructed feature License requirements: insp_programming ("INSPECTION PROGRAMMING") .
InspectionConstructedFeatureBuilder.CurrentStateType	currentStateEnum() Returns the current feature state (nominal or actual) License requirements: None.
void	cycleSolution() The button used to cycle through possible solutions License requirements: insp_programming ("INSPECTION PROGRAMMING") .
InspectionConstructedFeatureBuilder.DesignCreationType	designCreation() Returns the design feature creation type License requirements: None.
NXObject	designOffsetGeometry() Returns the offset design feature geometry License requirements: None.
InspectionConstructedFeatureBuilder.DestPcsEnumType	destinationPcsEnum() Returns the destination part coordinate system type License requirements: None.
InspectionConstructedFeatureBuilder.DirectionType	directionSpecifiedEnum() Returns the type of direction specified (direction vector or radial) License requirements: None.
Direction	directionVector() Returns the direction vector License requirements: None.
InspectionConstructedFeatureBuilder.ExtractEdgeDistanceType	extractEdgeDistance() Returns the extract edge distance type type License requirements: None.
double	extractEndDistance() Returns the extract end edge distance License requirements: None.
double	extractStartDistance() Returns the extract start edge distance License requirements: None.
InspectionConstructedFeatureBuilder.ConstFeatType	featureTypeEnum() Returns the feature type to be constructed License requirements: None.
String[]	getSubFeatures() Get the current subfeatures License requirements: None.
InspectionConstructedFeatureBuilder.CurrentStateType[]	getSubFeatureStates() Get the current subfeature states.
InspectionConstructedFeatureBuilder.MethodEnumType	methodEnum() Returns the construction method to be used License requirements: None.
double	moveDistance() Returns the move distance License requirements: None.
String	nominalName() Returns the nominal feature name License requirements: None.
String	pcsName() Returns the part coordinate system name License requirements: None.
SelectNXObject	selectNominalFeature() Returns the select nominal feature button License requirements: None.
void	setAvailFilterToggle(boolean availFilterToggle) License requirements: insp_programming ("INSPECTION PROGRAMMING") .
void	setAvailStateEnum(InspectionConstructedFeatureBuilder.AvailableStateType availStateEnum) License requirements: insp_programming ("INSPECTION PROGRAMMING") .
void	setConstName(String constName) License requirements: insp_programming ("INSPECTION PROGRAMMING") .
void	setCurrentStateEnum(InspectionConstructedFeatureBuilder.CurrentStateType currentStateEnum) License requirements: insp_programming ("INSPECTION PROGRAMMING") .
void	setDesignCreation(InspectionConstructedFeatureBuilder.DesignCreationType creationType) License requirements: insp_programming ("INSPECTION PROGRAMMING") .
void	setDesignOffsetGeometry(NXObject designOffset) License requirements: insp_programming ("INSPECTION PROGRAMMING") .
void	setDestinationPcsEnum(InspectionConstructedFeatureBuilder.DestPcsEnumType destinationPcsEnum) License requirements: insp_programming ("INSPECTION PROGRAMMING") .
void	setDirectionSpecifiedEnum(InspectionConstructedFeatureBuilder.DirectionType directionSpecifiedEnum) License requirements: insp_programming ("INSPECTION PROGRAMMING") .
void	setDirectionVector(Direction directionVector) License requirements: insp_programming ("INSPECTION PROGRAMMING") .
void	setExtractEdgeDistance(InspectionConstructedFeatureBuilder.ExtractEdgeDistanceType distanceType) License requirements: insp_programming ("INSPECTION PROGRAMMING") .
void	setExtractEndDistance(double endDistance) License requirements: insp_programming ("INSPECTION PROGRAMMING") .
void	setExtractStartDistance(double startDistance) License requirements: insp_programming ("INSPECTION PROGRAMMING") .
void	setFeatureTypeEnum(InspectionConstructedFeatureBuilder.ConstFeatType featureTypeEnum) License requirements: insp_programming ("INSPECTION PROGRAMMING") .
void	setMethodEnum(InspectionConstructedFeatureBuilder.MethodEnumType methodEnum) License requirements: insp_programming ("INSPECTION PROGRAMMING") .
void	setMoveDistance(double moveDistance) License requirements: insp_programming ("INSPECTION PROGRAMMING") .
void	setNominalName(String nominalName) License requirements: insp_programming ("INSPECTION PROGRAMMING") .
void	setPcsName(String pcsName) License requirements: insp_programming ("INSPECTION PROGRAMMING") .
void	setStepSize(double stepSize) License requirements: insp_programming ("INSPECTION PROGRAMMING") .
void	setSubFeat1Filter(boolean subFeat1Filter) License requirements: insp_programming ("INSPECTION PROGRAMMING") .
void	setSubFeat1Name(String subFeat1Name) License requirements: insp_programming ("INSPECTION PROGRAMMING") .
void	setSubFeat1StateEnum(InspectionConstructedFeatureBuilder.SubFeat1StateType subFeat1StateEnum) License requirements: insp_programming ("INSPECTION PROGRAMMING") .
void	setSubFeat2Filter(boolean subFeat2Filter) License requirements: insp_programming ("INSPECTION PROGRAMMING") .
void	setSubFeat2Name(String subFeat2Name) License requirements: insp_programming ("INSPECTION PROGRAMMING") .
void	setSubFeat2StateEnum(InspectionConstructedFeatureBuilder.SubFeat2StateType subFeat2StateEnum) License requirements: insp_programming ("INSPECTION PROGRAMMING") .
void	setSubFeatures(String[] subFeatures) Set the current subfeatures License requirements: insp_programming ("INSPECTION PROGRAMMING") .
void	setSubFeatureStates(InspectionConstructedFeatureBuilder.CurrentStateType[] subFeatureStates) Set the current subfeature states.
double	stepSize() Returns the extract step size License requirements: None.
boolean	subFeat1Filter() Returns the filter toggle for the first list of subfeatures License requirements: None.
String	subFeat1Name() Returns the name of the first subfeature License requirements: None.
SelectNXObject	subFeat1Select() Returns the first subfeature selection button License requirements: None.
InspectionConstructedFeatureBuilder.SubFeat1StateType	subFeat1StateEnum() Returns the state of features in the first subfeature list License requirements: None.
boolean	subFeat2Filter() Returns the filter toggle for the second list of subfeatures License requirements: None.
String	subFeat2Name() Returns the name of the first subfeature License requirements: None.
SelectNXObject	subFeat2Select() Returns the second subfeature selection button License requirements: None.
InspectionConstructedFeatureBuilder.SubFeat2StateType	subFeat2StateEnum() Returns the state of features in the second subfeature list License requirements: None.
void	updateDirectionVector(Vector3d vector) The constructed inspection feature direction vector based on selected vector License requirements: insp_programming ("INSPECTION PROGRAMMING") .

Methods inherited from interface nxopen.cam.OperationBuilder

channelName, description, endOfPath, endUdeSet, geometry, getHoleAxisValues, gougeChecking, holeAxisType, holeDepth, holeDepthType, layoutAndLayer, motionOutputBuilder, notes, optimizationBasedOn, optimizationDistanceMethod, optimizationLevel, pathDisplayOptions, postToolPathExit, retractDistance, retractDistanceOnToolAxisChange, safeClearance, selectToolFlag, setChannelName, setDescription, setGougeChecking, setHoleAxisType, setHoleAxisValues, setHoleDepthType, setOptimizationBasedOn, setOptimizationDistanceMethod, setOptimizationLevel, setPostToolPathExit, setSelectToolFlag, startOfPath, startUdeSet, toolChangeSetting, toolPathEditor, toolPathSplitParametersBuilder

Methods inherited from interface nxopen.cam.ParamBuilder

cycleEvent, cycleTable, getCustomizableItemBuilder, getCustomizableItemNames, optimizationMethod, setOptimizationMethod

Methods inherited from interface nxopen.Builder

commit, destroy, getCommittedObjects, getObject, showResults

Methods inherited from interface nxopen.TaggedObject

printTestData, printTestData, tag, tagValue

Methods inherited from interface nxopen.geometricutilities.IComponentBuilder

validate

Method Detail

featureTypeEnum

InspectionConstructedFeatureBuilder.ConstFeatType featureTypeEnum()
                                                           throws NXException,
                                                                  RemoteException

Returns the feature type to be constructed
License requirements: None.

Created in NX7.0.0

Throws:

NXException

RemoteException

setFeatureTypeEnum

void setFeatureTypeEnum(InspectionConstructedFeatureBuilder.ConstFeatType featureTypeEnum)
                 throws NXException,
                        RemoteException

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
Created in NX7.0.0

Parameters:

featureTypeEnum -

Throws:

NXException

RemoteException

methodEnum

InspectionConstructedFeatureBuilder.MethodEnumType methodEnum()
                                                       throws NXException,
                                                              RemoteException

Returns the construction method to be used
License requirements: None.

Created in NX7.0.0

Throws:

NXException

RemoteException

setMethodEnum

void setMethodEnum(InspectionConstructedFeatureBuilder.MethodEnumType methodEnum)
            throws NXException,
                   RemoteException

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
Created in NX7.0.0

Parameters:

methodEnum -

Throws:

NXException

RemoteException

availFilterToggle

boolean availFilterToggle()
                   throws NXException,
                          RemoteException

Returns the toggle to filter available features
License requirements: None.

Created in NX7.0.0

Throws:

NXException

RemoteException

setAvailFilterToggle

void setAvailFilterToggle(boolean availFilterToggle)
                   throws NXException,
                          RemoteException

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
Created in NX7.0.0

Parameters:

availFilterToggle -

Throws:

NXException

RemoteException

availableSelection

SelectNXObjectList availableSelection()
                               throws NXException,
                                      RemoteException

Returns the available feature screen selection button
License requirements: None.

Created in NX7.0.0

Throws:

NXException

RemoteException

availStateEnum

InspectionConstructedFeatureBuilder.AvailableStateType availStateEnum()
                                                               throws NXException,
                                                                      RemoteException

Returns the available feature state (nominal or actual)
License requirements: None.

Created in NX7.0.0

Throws:

NXException

RemoteException

setAvailStateEnum

void setAvailStateEnum(InspectionConstructedFeatureBuilder.AvailableStateType availStateEnum)
                throws NXException,
                       RemoteException

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
Created in NX7.0.0

Parameters:

availStateEnum -

Throws:

NXException

RemoteException

currentStateEnum

InspectionConstructedFeatureBuilder.CurrentStateType currentStateEnum()
                                                               throws NXException,
                                                                      RemoteException

Returns the current feature state (nominal or actual)
License requirements: None.

Created in NX7.0.0

Throws:

NXException

RemoteException

setCurrentStateEnum

void setCurrentStateEnum(InspectionConstructedFeatureBuilder.CurrentStateType currentStateEnum)
                  throws NXException,
                         RemoteException

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
Created in NX7.0.0

Parameters:

currentStateEnum -

Throws:

NXException

RemoteException

destinationPcsEnum

InspectionConstructedFeatureBuilder.DestPcsEnumType destinationPcsEnum()
                                                                throws NXException,
                                                                       RemoteException

Returns the destination part coordinate system type
License requirements: None.

Created in NX7.0.0

Throws:

NXException

RemoteException

setDestinationPcsEnum

void setDestinationPcsEnum(InspectionConstructedFeatureBuilder.DestPcsEnumType destinationPcsEnum)
                    throws NXException,
                           RemoteException

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
Created in NX7.0.0

Parameters:

destinationPcsEnum -

Throws:

NXException

RemoteException

pcsName

String pcsName()
        throws NXException,
               RemoteException

Returns the part coordinate system name
License requirements: None.

Created in NX7.0.0

Throws:

NXException

RemoteException

setPcsName

void setPcsName(String pcsName)
         throws NXException,
                RemoteException

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
Created in NX7.0.0

Parameters:

pcsName -

Throws:

NXException

RemoteException

directionSpecifiedEnum

InspectionConstructedFeatureBuilder.DirectionType directionSpecifiedEnum()
                                                                  throws NXException,
                                                                         RemoteException

Returns the type of direction specified (direction vector or radial)
License requirements: None.

Created in NX7.0.0

Throws:

NXException

RemoteException

setDirectionSpecifiedEnum

void setDirectionSpecifiedEnum(InspectionConstructedFeatureBuilder.DirectionType directionSpecifiedEnum)
                        throws NXException,
                               RemoteException

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
Created in NX7.0.0

Parameters:

directionSpecifiedEnum -

Throws:

NXException

RemoteException

directionVector

Direction directionVector()
                   throws NXException,
                          RemoteException

Returns the direction vector
License requirements: None.

Created in NX7.0.0

Throws:

NXException

RemoteException

setDirectionVector

void setDirectionVector(Direction directionVector)
                 throws NXException,
                        RemoteException

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
Created in NX7.0.0

Parameters:

directionVector -

Throws:

NXException

RemoteException

moveDistance

double moveDistance()
             throws NXException,
                    RemoteException

Returns the move distance
License requirements: None.

Created in NX7.0.0

Throws:

NXException

RemoteException

setMoveDistance

void setMoveDistance(double moveDistance)
              throws NXException,
                     RemoteException

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
Created in NX7.0.0

Parameters:

moveDistance -

Throws:

NXException

RemoteException

subFeat1Filter

boolean subFeat1Filter()
                throws NXException,
                       RemoteException

Returns the filter toggle for the first list of subfeatures
License requirements: None.

Created in NX7.0.0

Throws:

NXException

RemoteException

setSubFeat1Filter

void setSubFeat1Filter(boolean subFeat1Filter)
                throws NXException,
                       RemoteException

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
Created in NX7.0.0

Parameters:

subFeat1Filter -

Throws:

NXException

RemoteException

subFeat1Select

SelectNXObject subFeat1Select()
                       throws NXException,
                              RemoteException

Returns the first subfeature selection button
License requirements: None.

Created in NX7.0.0

Throws:

NXException

RemoteException

subFeat1StateEnum

InspectionConstructedFeatureBuilder.SubFeat1StateType subFeat1StateEnum()
                                                                 throws NXException,
                                                                        RemoteException

Returns the state of features in the first subfeature list
License requirements: None.

Created in NX7.0.0

Throws:

NXException

RemoteException

setSubFeat1StateEnum

void setSubFeat1StateEnum(InspectionConstructedFeatureBuilder.SubFeat1StateType subFeat1StateEnum)
                   throws NXException,
                          RemoteException

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
Created in NX7.0.0

Parameters:

subFeat1StateEnum -

Throws:

NXException

RemoteException

subFeat1Name

String subFeat1Name()
             throws NXException,
                    RemoteException

Returns the name of the first subfeature
License requirements: None.

Created in NX7.0.0

Throws:

NXException

RemoteException

setSubFeat1Name

void setSubFeat1Name(String subFeat1Name)
              throws NXException,
                     RemoteException

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
Created in NX7.0.0

Parameters:

subFeat1Name -

Throws:

NXException

RemoteException

subFeat2Filter

boolean subFeat2Filter()
                throws NXException,
                       RemoteException

Returns the filter toggle for the second list of subfeatures
License requirements: None.

Created in NX7.0.0

Throws:

NXException

RemoteException

setSubFeat2Filter

void setSubFeat2Filter(boolean subFeat2Filter)
                throws NXException,
                       RemoteException

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
Created in NX7.0.0

Parameters:

subFeat2Filter -

Throws:

NXException

RemoteException

subFeat2Select

SelectNXObject subFeat2Select()
                       throws NXException,
                              RemoteException

Returns the second subfeature selection button
License requirements: None.

Created in NX7.0.0

Throws:

NXException

RemoteException

subFeat2StateEnum

InspectionConstructedFeatureBuilder.SubFeat2StateType subFeat2StateEnum()
                                                                 throws NXException,
                                                                        RemoteException

Returns the state of features in the second subfeature list
License requirements: None.

Created in NX7.0.0

Throws:

NXException

RemoteException

setSubFeat2StateEnum

void setSubFeat2StateEnum(InspectionConstructedFeatureBuilder.SubFeat2StateType subFeat2StateEnum)
                   throws NXException,
                          RemoteException

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
Created in NX7.0.0

Parameters:

subFeat2StateEnum -

Throws:

NXException

RemoteException

subFeat2Name

String subFeat2Name()
             throws NXException,
                    RemoteException

Returns the name of the first subfeature
License requirements: None.

Created in NX7.0.0

Throws:

NXException

RemoteException

setSubFeat2Name

void setSubFeat2Name(String subFeat2Name)
              throws NXException,
                     RemoteException

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
Created in NX7.0.0

Parameters:

subFeat2Name -

Throws:

NXException

RemoteException

cycleSolution

void cycleSolution()
            throws NXException,
                   RemoteException

The button used to cycle through possible solutions
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
Created in NX7.0.0

Throws:

NXException

RemoteException

createNominal

void createNominal()
            throws NXException,
                   RemoteException

The button used to create the nominal constructed feature
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
Created in NX7.0.0

Throws:

NXException

RemoteException

selectNominalFeature

SelectNXObject selectNominalFeature()
                             throws NXException,
                                    RemoteException

Returns the select nominal feature button
License requirements: None.

Created in NX7.0.0

Throws:

NXException

RemoteException

nominalName

String nominalName()
            throws NXException,
                   RemoteException

Returns the nominal feature name
License requirements: None.

Created in NX7.0.0

Throws:

NXException

RemoteException

setNominalName

void setNominalName(String nominalName)
             throws NXException,
                    RemoteException

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
Created in NX7.0.0

Parameters:

nominalName -

Throws:

NXException

RemoteException

constName

String constName()
          throws NXException,
                 RemoteException

Returns the constructed feature name
License requirements: None.

Created in NX7.0.0

Throws:

NXException

RemoteException

setConstName

void setConstName(String constName)
           throws NXException,
                  RemoteException

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
Created in NX7.0.0

Parameters:

constName -

Throws:

NXException

RemoteException

getSubFeatures

String[] getSubFeatures()
                 throws NXException,
                        RemoteException

Get the current subfeatures
License requirements: None.

Created in NX7.5.1

Returns:

Current subfeatures

Throws:

NXException

RemoteException

setSubFeatures

void setSubFeatures(String[] subFeatures)
             throws NXException,
                    RemoteException

Set the current subfeatures
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
Created in NX7.5.1

Parameters:

subFeatures - Current subfeatures

Throws:

NXException

RemoteException

updateDirectionVector

void updateDirectionVector(Vector3d vector)
                    throws NXException,
                           RemoteException

The constructed inspection feature direction vector based on selected vector
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
Created in NX7.5.2

Parameters:

vector - The vector data to use for update

Throws:

NXException

RemoteException

getSubFeatureStates

InspectionConstructedFeatureBuilder.CurrentStateType[] getSubFeatureStates()
                                                                    throws NXException,
                                                                           RemoteException

Get the current subfeature states.
License requirements: None.

Created in NX7.5.3

Returns:

Current subfeature states

Throws:

NXException

RemoteException

setSubFeatureStates

void setSubFeatureStates(InspectionConstructedFeatureBuilder.CurrentStateType[] subFeatureStates)
                  throws NXException,
                         RemoteException

Set the current subfeature states.
License requirements: insp_programming ("INSPECTION PROGRAMMING")

Created in NX7.5.3

Parameters:

subFeatureStates - Current subfeature states

Throws:

NXException

RemoteException

designCreation

InspectionConstructedFeatureBuilder.DesignCreationType designCreation()
                                                               throws NXException,
                                                                      RemoteException

Returns the design feature creation type
License requirements: None.

Created in NX7.5.3

Throws:

NXException

RemoteException

setDesignCreation

void setDesignCreation(InspectionConstructedFeatureBuilder.DesignCreationType creationType)
                throws NXException,
                       RemoteException

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
Created in NX7.5.3

Parameters:

creationType -

Throws:

NXException

RemoteException

designOffsetGeometry

NXObject designOffsetGeometry()
                       throws NXException,
                              RemoteException

Returns the offset design feature geometry
License requirements: None.

Created in NX7.5.3

Throws:

NXException

RemoteException

setDesignOffsetGeometry

void setDesignOffsetGeometry(NXObject designOffset)
                      throws NXException,
                             RemoteException

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
Created in NX7.5.3

Parameters:

designOffset -

Throws:

NXException

RemoteException

extractStartDistance

double extractStartDistance()
                     throws NXException,
                            RemoteException

Returns the extract start edge distance
License requirements: None.

Created in NX8.0.1

Throws:

NXException

RemoteException

setExtractStartDistance

void setExtractStartDistance(double startDistance)
                      throws NXException,
                             RemoteException

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
Created in NX8.0.1

Parameters:

startDistance -

Throws:

NXException

RemoteException

extractEndDistance

double extractEndDistance()
                   throws NXException,
                          RemoteException

Returns the extract end edge distance
License requirements: None.

Created in NX8.0.1

Throws:

NXException

RemoteException

setExtractEndDistance

void setExtractEndDistance(double endDistance)
                    throws NXException,
                           RemoteException

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
Created in NX8.0.1

Parameters:

endDistance -

Throws:

NXException

RemoteException

extractEdgeDistance

InspectionConstructedFeatureBuilder.ExtractEdgeDistanceType extractEdgeDistance()
                                                                         throws NXException,
                                                                                RemoteException

Returns the extract edge distance type type
License requirements: None.

Created in NX8.0.1

Throws:

NXException

RemoteException

setExtractEdgeDistance

void setExtractEdgeDistance(InspectionConstructedFeatureBuilder.ExtractEdgeDistanceType distanceType)
                     throws NXException,
                            RemoteException

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
Created in NX8.0.1

Parameters:

distanceType -

Throws:

NXException

RemoteException

stepSize

double stepSize()
         throws NXException,
                RemoteException

Returns the extract step size
License requirements: None.

Created in NX8.0.1

Throws:

NXException

RemoteException

setStepSize

void setStepSize(double stepSize)
          throws NXException,
                 RemoteException

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
Created in NX8.0.1

Parameters:

stepSize -

Throws:

NXException

RemoteException