Interface | Description |
---|---|
AcrossVoids | |
AlongMachineAxisMoveBuilder |
Represents Along MCS Axis Move Builder
To create a new instance of this class, use MoveCollection.createAlongMcsAxisMoveBuilder(nxopen.cam.Move) Created in NX5.0.0 |
AlongMcsAxisMoveBuilder |
Represents Along MCS Axis Move Builder
To create a new instance of this class, use MoveCollection.createAlongMcsAxisMoveBuilder(nxopen.cam.Move) Created in NX5.0.0 |
AlongToolAxisMoveBuilder |
Represents the Move To Point Builder
To create a new instance of this class, use MoveCollection.createAlongToolAxisMoveBuilder(nxopen.cam.Move) Created in NX5.0.0 |
ArcOutputTypeCiBuilder |
Represents a ArcOutputTypeCiBuilder .
|
AreaMillingContainment |
Represents a Containment Builder .
|
AreaMillingNonSteepContainment |
Represents a NonSteep Containment Builder .
|
AreaMillingSteepContainment |
Represents a Steep Containment Builder .
|
BarrelToolBuilder |
Represents a BarrelTool Builder
To create a new instance of this class, use NCGroupCollection.createBarrelToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
BaseBuilder | |
Blade |
Represents a Blade Rough Drive Method Builder
This is an abstract superclass that has instantaible subclasses . |
BladeCutLevels |
Represents a Blade Cut Levels Builder
This is an abstract class and cannot be instantiated. |
BladeCutStart |
Represents a Blade Rough Drive Method Builder
This is an abstract superclass that has instantaible subclasses . |
BladeEdge |
Represents a BladeEdge Builder .
|
BladeFinish |
Represents a Blade Finish Drive Method Builder .
|
BladeFinishGeom |
Represents BladeFinishGeom Builder .
|
BladeRough |
Represents a Blade Rough Drive Method Builder .
|
BladeStartPoint |
Represents BladeStartPoint Builder .
|
BlankIpw |
Represents the blank ipw builder for blank definition
To obtain an instance of this class use the GeometryGroup Created in NX8.0.0 |
BlendFinish |
Represents a Blend Finish Drive Method Builder .
|
Boundary |
Represents a CAM boundary object
This is an abstract class and cannot be instantiated. |
BoundaryMemberSet |
Represents a boundary member set .
|
BoundaryMemberSetList |
Represents a list of objects.
|
BoundaryMemberSetPlanarMill |
Represents a boundary member set .
|
BoundaryMillingMemberSet |
Represents a boundary member set .
|
BoundaryMillingSet |
Represents a boundary milling set.
|
BoundaryPlanarMill |
Represents a CAM boundary object
This is an abstract class and cannot be instantiated. |
BoundarySet |
Represents a boundary set.
|
BoundarySetList |
Represents a list of objects.
|
BoundarySetPlanarMill |
Represents a boundary set for the planar mill/surface contour operation
To create a new instance of this class, use Boundary.createBoundarySetPlanarMill() Created in NX11.0.1 |
BoundaryTurnBlank |
Represents a
BoundaryTurnBlank
This builder cannot be instantiated separately. |
BoundaryTurnMemberCorner |
Represents a
BoundaryTurnMemberCorner
This builder cannot be instantiated separately. |
BoundaryTurnMemberEvents |
Represents a
BoundaryTurnMemberEvents
This builder cannot be instantiated separately. |
BoundaryTurnMemberFeed |
Represents a
BoundaryTurnMemberFeed
This builder cannot be instantiated separately. |
BoundaryTurnMemberFineFinishCorner |
Represents a
BoundaryTurnMemberFineFinishCorner
This builder cannot be instantiated separately. |
BoundaryTurnMemberFineFinishOffset |
Represents a
BoundaryTurnMemberFineFinishOffset
This builder cannot be instantiated separately. |
BoundaryTurnMemberOffset |
Represents a
BoundaryTurnMemberOffset
This builder cannot be instantiated separately. |
BoundaryTurnMemberSet |
Represents a boundary turning member set .
|
BoundaryTurnSet |
Represents a boundary turning set.
|
BoundaryTurnVariableStock |
Represents a BoundaryTurnVariableStock
This is an abstract class and cannot be instantiated. |
BoundaryTurnVariableStockSet |
Represents a turning boundary variable stock set
To create a new instance of this class, use BoundaryTurnVariableStock.createItemBuilder() Created in NX9.0.2 |
BoundaryTurnVariableStockSetList |
Represents a list of objects.
|
CAMAttribute |
Represents a CAM Feature Attribute
To obtain an instance of this class use CAMFeature Created in NX8.0.0 |
CAMAttributeCollection |
Represents the CAM Attribute collection
To obtain an instance of this class, refer to CAMFeature Created in NX8.0.0 |
CAMFeature |
Represents a CAM Feature
To obtain an instance of this class use FeatureRecognitionBuilder Created in NX7.5.0 |
CAMFeatureCollection |
Represents the CAMFeature collection
To obtain an instance of this class, refer to BasePart Created in NX7.5.0 |
CAMFeatureList |
Represents a list of objects.
|
CAMObject |
Represents interface for all CAM Object
To create or edit an instance of this class, use ParamBuilder Created in NX4.0.0 |
CAMSession | |
CAMSetup | |
CavityMilling |
Represents a Cavity Milling Operation
To create or edit an instance of this class, use CavityMillingBuilder Created in NX7.5.0 |
CavityMillingBuilder |
Represents a CavityMilling Builder
To create a new instance of this class, use OperationCollection.createCavityMillingBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
CenterlineDrillTurning |
Represents a Centerline Drill Turning operation
To create or edit an instance of this class, use CenterlineDrillTurningBuilder Created in NX7.5.0 |
CenterlineDrillTurningBuilder |
Represents a CenterlineDrillTurningBuilder
To create a new instance of this class, use OperationCollection.createCenterlineDrillTurningBuilder(nxopen.cam.CAMObject) Created in NX6.0.0 |
CenterlineDrillVariableIncrementBuilder |
Represents a Turn Avoidance Path Points Builder .
|
ChamferMilling |
Represents a Chamfer Milling Operation
To create or edit an instance of this class, use ChamferMillingBuilder Created in NX9.0.2 |
ChamferMillingBuilder |
Represents a ChamferMillingBuilder Builder
To create a new instance of this class, use OperationCollection.createChamferMillingBuilder(nxopen.cam.CAMObject) Created in NX9.0.2 |
ChipControl | |
CircularAboutAxisMoveBuilder |
Represents the Circular Move To Point Builder
To create a new instance of this class, use MoveCollection.createCircularAboutAxisMoveBuilder(nxopen.cam.Move) Created in NX5.0.0 |
CleanupOutput | |
CleanupSettings | |
CollisionConfigurationBuilder |
Represents a
CollisionConfigurationBuilder
This is an abstract class, and cannot be instantiated. |
CollisionPairBuilder |
Represents a
CollisionPairBuilder
To create a new instance of this class, use KinematicConfigurator.createCollisionPairBuilder() Created in NX6.0.0 |
CollisionPairBuilderList |
Represents a list of objects.
|
ContainerMoveBuilder |
Represents the container move
To create a new instance of this class, use MoveCollection.createContainerMoveBuilder(nxopen.cam.Move, int) Created in NX11.0.2 NX_REMOVE_FROM_JAVA_API |
ContourAngle | |
ConvertFromMCDBuilder |
Represents a
ConvertFromMCDBuilder To create a new instance of this class, use KinematicConfigurator.createConvertFromMcdBuilder() Created in NX9.0.0 |
CornerControlBuilder |
Represents a FinishPasses Builder .
|
CustomLoops | Deprecated
Deprecated in NX9.0.0.
|
CustomLoopSet | Deprecated
Deprecated in NX9.0.0.
|
CustomLoopSetList |
Represents a list of objects.
|
CutAngle |
Represents a boundary cut angle ci Builder .
|
CutBand |
Cut Band Builder .
|
Cutcom | |
CutDepthChecker |
Represents a cut depth checker object
This has not creator . |
CutDirection |
Represents a boundary cut direction ci Builder
This builder can not instantiated separately. |
CutDwell | |
CutLevel |
Represents a cut level object for cavity mill and zlevel mill.
|
CutLevelPlanar |
Represents a cut level object for planar mill.
|
CutParameters | |
CutPatternBuilder |
Represents a Cut Pattern Builder .
|
CutRegionsBuilder |
Represents a Cut Regions Builder .
|
CutRegionsData |
Represents the Cut Regions data .
|
CutSideBuilder |
Represents a cut side builder
This is an abstract class and cannot be instantiated. |
CutSides |
Represents a Cut Sides Builder .
|
CutStrategy |
Represents cut strategy .
|
CutterExport |
Represents Cutter Export Builder .
|
CutVolume |
The classs represent the sub builder for creating cut volume feature items
To create a new instance of this class, use CutVolumeGeom.createCutVolume() Created in NX8.0.0 |
CutVolumeGeom |
The classs represent the builder for creating cut volume features .
|
CutVolumeList |
Represents a list of objects.
|
Cycle |
Represets a User Defined Event .
|
CycleCoolant |
Represets a User Defined Event .
|
CycleDwell |
Represets a User Defined Event .
|
CycleNodragClearance |
Represets a User Defined Event .
|
CycleSpindle |
Represets a User Defined Event .
|
CycleStepRetract |
Represets a User Defined Event .
|
CycleTipRelease |
Represets a User Defined Event .
|
CylinderMilling |
Represents a Cylinder Milling Operation
To create or edit an instance of this class, use CylinderMillingBuilder Created in NX9.0.1 |
CylinderMillingBuilder |
Represents a CylinderMillingBuilder Builder
To create a new instance of this class, use OperationCollection.createCylinderMillingBuilder(nxopen.cam.CAMObject) Created in NX8.0.0 |
CylinderMillingCutParameters |
Represents a CylinderMillingCutParameters Builder .
|
CylindricalMillingBuilder |
Represents a CylindricalMilling Builder
This is an abstract class and cannot be instantiated. |
CylindricalMillingCutParameters |
Represents a CylindricalMillingCutParameters Builder
This is an abstract class and cannot be instantiated. |
DeltaMoveBuilder |
Represents the Delta Move Builder
To create a new instance of this class, use MoveCollection.createDeltaMoveBuilder(nxopen.cam.Move) Created in NX5.0.0 |
DimensionRule |
Represents a DimensionRule Builder .
|
DisplayPaint |
Represents a display paint Builder
This is an abstract class and cannot be instantiated. |
DisplayPath |
Represents a display path Builder
This is an abstract class and cannot be instantiated. |
DisplaySilhouette |
Represents a display silhouette Builder
This is an abstract class and cannot be instantiated. |
DisplayTool |
Represents a display tool Builder
This is an abstract class and cannot be instantiated. |
DmAmBuilder |
Represents a Area Milling Drive Method Builder .
|
DmBndBuilder |
Represents a Boundary Drive Method Builder .
|
DmCmBuilder |
Represents a DmCmBuilder .
|
DmCmMultiplePassesCiBuilder |
Represents a DmCmMultiplePassesCiBuilder
To obtain an instance of this class use DmCmBuilder.dmCmMultiplePassesBuilder() Created in NX5.0.0 |
DmCurveBuilder |
Represents a Curve Drive Method Builder .
|
DmRadBuilder |
Represents a DmRadBuilder Builder .
|
DmRotaryFloorFinishBuilder |
represent rotary floor finish builder .
|
DmSpiralBuilder |
Represents a Spiral Drive Method Builder
This is an abstract class and cannot be instantiated. |
DmStreamlineCutStep |
Represents a streamline cut step builder
This object is a sub-object and cannot be instantiated. |
DmSurfBuilder |
Represents a DmSurfBuilder .
|
DmToolPosition |
Represents a streamline tool position builder
This is an abstract class and cannot be instantiated. |
DmTpBuilder |
Represents a tool path Drive Method Builder
This is an abstract class and cannot be instantiated. |
DmTrimExtend |
Represents a streamline trim and extend builder
This is an abstract class and cannot be instantiated. |
DmUserExitCiBuilder |
Represents a exit name ci Builder .
|
Documentation |
Represents a Documentation operation
To create or edit an instance of this class, use DocumentationBuilder Created in NX9.0.3 |
DocumentationBuilder |
Represents a Documentation Builder
To create a new instance of this class, use OperationCollection.createDocumentationBuilder(nxopen.cam.CAMObject) Created in NX9.0.3 |
DPMItpBuilder |
Represents an DPMItp Builder
To create a new instance of this class, use OperationCollection.createDpmitpBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
DPMTubeBuilder |
Represents a Tube Drive Builder .
|
DrillBackCountersinkTool |
Represents a Drill Back Countersink Tool Builder
To create a new instance of this class, use NCGroupCollection.createDrillBackCountersinkTool(nxopen.cam.CAMObject) Created in NX10.0.2 |
DrillBackSpotfacingToolBuilder |
Represents a drill back spotfacing Tool Builder
To create a new instance of this class, use NCGroupCollection.createDrillBackSpotfacingToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
DrillBoreToolBuilder |
Represents a drill bore Tool Builder
To create a new instance of this class, use NCGroupCollection.createDrillBoreToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
DrillBoringBarTool |
Represents a new Boring Bar Tool Builder
To create a new instance of this class, use NCGroupCollection.createDrillBoringBarTool(nxopen.cam.CAMObject) Created in NX11.0.1 |
DrillBurnishingToolBuilder |
Represents a drill burnishing Tool Builder
To create a new instance of this class, use NCGroupCollection.createDrillBurnishingToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
DrillCenterBellToolBuilder |
Represents a Drill Center Bell Tool Builder
To create a new instance of this class, use NCGroupCollection.createDrillCenterBellToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
DrillChamferBoringBarTool |
Represents a Chamfer Boring Bar Tool Builder
To create a new instance of this class, use NCGroupCollection.createDrillChamferBoringBarTool(nxopen.cam.CAMObject) Created in NX11.0.1 |
DrillCoreToolBuilder |
Represents a drill core Tool Builder
To create a new instance of this class, use NCGroupCollection.createDrillCoreToolBuilder(nxopen.cam.CAMObject) Created in NX9.0.0 |
DrillCounterboreToolBuilder |
Represents a drill counterbore Tool Builder
To create a new instance of this class, use NCGroupCollection.createDrillCounterboreToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
DrillCtskToolBuilder |
Represents a Drill Ctsk Tool Builder
To create a new instance of this class, use NCGroupCollection.createDrillCtskToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
DrillGeomBuilder |
Represents a DrillGeom Builder
To create a new instance of this class, use NCGroupCollection.createDrillGeomBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
DrillMethodBuilder |
Represents a Drill Method Builder
To create a new instance of this class, use NCGroupCollection.createDrillMethodBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
DrillReamerToolBuilder |
Represents a drill Tool Builder
To create a new instance of this class, use NCGroupCollection.createDrillReamerToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
DrillSpotdrillToolBuilder |
Represents a drill spotdrill Tool Builder
To create a new instance of this class, use NCGroupCollection.createDrillSpotdrillToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
DrillSpotfaceToolBuilder |
Represents a drill spotface tool Builder
To create a new instance of this class, use NCGroupCollection.createDrillSpotfaceToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
DrillStdToolBuilder |
Represents a drill std Tool Builder
To create a new instance of this class, use NCGroupCollection.createDrillStdToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
DrillStepToolBuilder |
Represents a drill step Tool Builder
To create a new instance of this class, use NCGroupCollection.createDrillStepToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
DrillSurfaceBuilder |
Represents a Drill Surface Builder
This is an abstract class and cannot be instantiated. |
DrillTapToolBuilder |
Represents a drill tap Tool Builder
To create a new instance of this class, use NCGroupCollection.createDrillTapToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
DrillThreadMillToolBuilder |
Represents a drill thread mill Tool Builder
To create a new instance of this class, use NCGroupCollection.createDrillThreadMillToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
DrillToolBuilder |
Represents a drill Tool Builder
This is an abstract class, and cannot be instantiated. |
DriveChainItemBuilder |
Represents the Drive Chain Item Builder
This cannot be instantiated . |
DriveChainItemBuilderList |
Represents a list of objects.
|
DriveMode |
Drive Mode Builder .
|
EdgeFinish |
Represents a Blade Finish Drive Method Builder .
|
EditSubopCommand |
Represents an Edit Subop Command Builder .
|
ElementDoubleBuilder |
Represents a builder for an Element double value in of a CAM.CAMObject
Created in NX9.0.3 |
ElementIntBuilder |
Represents a builder for an Element int value in of a CAM.CAMObject
Created in NX10.0.1 |
ElementStringBuilder |
Represents a builder for an Element int value in of a CAM.CAMObject
Created in NX10.0.3 |
Engraving |
Represents a Engraving Operation
To create or edit an instance of this class, use EngravingBuilder Created in NX7.5.0 |
EngravingBuilder |
Represents a Engraving Builder
To create a new instance of this class, use OperationCollection.createEngravingBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
ExtendAtEdges | |
FaceMilling |
Represents a Face Milling Operation
To create or edit an instance of this class, use FaceMillingBuilder Created in NX7.5.0 |
FaceMillingBuilder |
Represents a FaceMilling Builder
To create a new instance of this class, use OperationCollection.createFaceMillingBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
FacesSequence |
Represents faces sequence .
|
FeatureBasedGeomBuilder |
Represents a FeatureBasedGeom Builder
To create a new instance of this class, use NCGroupCollection.createFeatureBasedGeomBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
FeatureGeomBuilder |
Represents a FeatureGeom Builder
This is an abstract class, and cannot be instantiated. |
FeatureGeometry |
Represents a Base Geometry Group
To create or edit an instance of this class, use FeatureGeomBuilder Created in NX7.5.0 |
FeatureGeometryGroup |
Represents a CAM Feature Group
To obtain an instance of this class use FeatureRecognitionBuilder Created in NX8.0.0 |
FeatureGroupBuilder |
Represents a FeatureBasedGeom Builder
To create a new instance of this class, use NCGroupCollection.createFeatureGroupBuilder(nxopen.cam.CAMObject) Created in NX9.0.3 |
FeatureMilling |
Represents a Feature Milling Operation
To create or edit an instance of this class, use FeatureMillingBuilder Created in NX7.5.0 |
FeatureMillingBuilder |
Represents a FeatureMilling Builder
To create a new instance of this class, use OperationCollection.createFeatureMillingBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
FeatureMillingCutParameters |
Represents a FeatureMillingCutParameters Builder .
|
FeatureProcessBuilder |
The Create Feature Process Builder class creates operations and features groups
To create a new instance of this class, use CAMSetup.createFeatureProcessBuilder() Default values. |
FeatureRecognitionBuilder |
Represents a FeatureRecognition Builder
To create a new instance of this class, use CAMSetup.createFeatureRecognitionBuilder(nxopen.cam.CAMObject) Created in NX6.0.0 |
FeatureTeaching |
Represents a FeatureTeaching Builder
To create a new instance of this class, use CAMSetup.createFeatureTeaching(nxopen.cam.CAMObject) Created in NX8.0.0 |
FeedsBuilder |
Represents a feeds Builder .
|
FeedsOptimizationData | |
FeedsOptimizeBuilder |
Represents a
FeedsOptimizeBuilder
a "commit" of this object will perform the Feed Rate Optimization. |
FeedsTurnBuilder |
Represents a turning feeds Builder .
|
FeedsWedmBuilder |
Represents a wedm feeds Builder .
|
FinishDwell | |
FinishPassesBuilder |
Represents a FinishPasses Builder
This is an abstract class, and cannot be instantiated. |
FinishTurning |
Represents a Turn Finishing operation
To create or edit an instance of this class, use FinishTurningBuilder Created in NX7.5.0 |
FinishTurningBuilder |
Represents a FinishTurning Builder
To create a new instance of this class, use OperationCollection.createFinishTurningBuilder(nxopen.cam.CAMObject) Created in NX6.0.0 |
FirstPlunge |
Represents the first plunge .
|
FlowBuilder |
Represents a FlowBuilder Builder
This is an abstract class and cannot be instantiated. |
FlowCutSteepContainment |
Represents a Steep Containment Builder .
|
FollowCurveMoveBuilder |
Represents the Follow Curve Move Builder
To create a new instance of this class, use MoveCollection.createFollowCurveMoveBuilder(nxopen.cam.Move) Default values. |
FollowGeometryMoveBuilder |
Represents the Follow Geometry Move Builder
This is an abstract class, and cannot be created. |
FollowPartMoveBuilder |
Represents the Follow Part Move Builder
To create a new instance of this class, use MoveCollection.createFollowPartMoveBuilder(nxopen.cam.Move) Default values. |
FormEdgesBuilder |
Represents a FormEdges Builder .
|
FormToolBuilder |
Represents a Form tool builder
To create a new instance of this class, use NCGroupCollection.createFormToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
GeneralPropertiesBuilder |
Represents a
GeneralPropertiesBuilder to be used for setting the name
of a specified CAM object. |
GenericMotionControl |
Represents a Generic Motion Control operation
To create or edit an instance of this class, use GmcOpBuilder Created in NX7.5.0 |
GenericToolBuilder |
Represents a Generic Tool Builder
To create a new instance of this class, use NCGroupCollection.createGenericToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
GenericTrackingBuilder |
Represents a GenericTracking Builder
To create a new instance of this class, use Tool.createGenericTrackingBuilder(nxopen.cam.SolidTrackPoint) Created in NX5.0.0 |
Geometry |
Represents a CAM geometry object .
|
GeometryCiBuilder |
Represents a geometry ci Builder .
|
GeometryGroup |
Represents a CAM geometry builder for group level .
|
GeometrySet |
Represents a geometry set for a CAM object.
|
GeometrySetList |
Represents a list of objects.
|
GmcOpBuilder |
Represents a GmcOp Builder
To create a new instance of this class, use OperationCollection.createGmcopBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
GougeCheckBuilder |
Represents a
GougeCheckBuilder . |
GougeCheckResults |
Represents the gouge results data .
|
GrooveMilling |
Represents a Groove Milling Operation
To create or edit an instance of this class, use GrooveMillingBuilder Created in NX9.0.0 |
GrooveMillingBuilder |
Represents a GrooveMillingBuilder
To create a new instance of this class, use OperationCollection.createGrooveMillingBuilder(nxopen.cam.CAMObject) Created in NX9.0.0 |
GrooveToolBuilder |
Represents a Groove tool builder
To create a new instance of this class, use NCGroupCollection.createGrooveToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
GroupFeatures |
Represents the group features command
To create a new instance of this class, use NCGroupCollection.createGroupFeatures() Default values. |
GuidedCurveBuilder |
Represents a Guided Curve Drive Method Builder .
|
GuidedCurveCutOrder |
Represents a guided curve cut order builder
This is an abstract class and cannot be instantiated. |
GuidingCurvesCutDir |
Represents a guiding curves cut dir type
This is an abstract class and cannot be instantiated. |
HolderSectionBuilder |
Represents a Holder Section Builder .
|
HoldingSystemBuilder |
Represents a
HoldingSystemBuilder
This is an abstract class, and cannot be instantiated. |
HoldingSystemBuilderList |
Represents a list of objects.
|
HoleBossGeom |
Represents a CAM geometry builder
This is an abstract class and cannot be instantiated. |
HoleBossGeometry |
Represents a CAM geometry builder
To create a new instance of this class, use NCGroupCollection.createHoleBossGeometryBuilder(nxopen.cam.CAMObject) Created in NX7.5.0 |
HoleBossSet |
Represents a Cut Area Geometry builder
To create a new instance of this class, use HoleBossGeom.createHoleBossBuilder(nxopen.NXObject[], double, double, nxopen.NXObject, int) Created in NX7.5.0 |
HoleBossSetList |
Represents a list of objects.
|
HoleDrilling |
Represents a Hole Drilling Operation
To create or edit an instance of this class, use HoleDrillingBuilder Created in NX9.0.1 |
HoleDrillingBuilder |
Represents a HoleDrillingBuilder Builder
To create a new instance of this class, use OperationCollection.createHoleDrillingBuilder(nxopen.cam.CAMObject) Created in NX9.0.0 |
HoleDrillingCutParameters |
Represents a HoleDrillingCutParameters Builder .
|
HoleMachiningBuilder |
Represents a HoleMachiningBuilder Builder
This is an abstract class and cannot be instantiated. |
HoleMachiningCutParameters |
Represents a HoleMachiningCutParameters Builder
This is an abstract class and cannot be instantiated. |
HoleMaking |
Represents a Hole Making operation
To create or edit an instance of this class, use HoleMakingBuilder Created in NX7.5.0 |
HoleMakingBuilder |
Represents a HoleMaking Builder
To create a new instance of this class, use OperationCollection.createHoleMakingBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
HubFinish |
Represents a Hub Finish Drive Method Builder .
|
InferredDouble |
Represents a builder for an inferred value in of a CAM.CAMObject
Created in NX7.5.0 |
Inheritable2dLength |
Represents a builder for an inheritable double value in of a CAM.CAMObject
Created in NX7.5.0 |
InheritableBoolBuilder |
Represents a builder for an inheritable integer value in of a CAM.CAMObject
Created in NX8.5.3 |
InheritableBuilder |
Represents a builder for an inheritable value in of a CAM.CAMObject
Created in NX6.0.0 |
InheritableDoubleBuilder |
Represents a builder for an inheritable double value in of a CAM.CAMObject
Created in NX5.0.0 |
InheritableFeedBuilder |
Represents a builder for an inheritable feed value in of a CAM.CAMObject
Created in NX5.0.0 |
InheritableFeedModeBuilder |
Represents a builder for an inheritable enum value in of a CAM.CAMObject
Created in NX8.0.0 |
InheritableIntBuilder |
Represents a builder for an inheritable integer value in of a CAM.CAMObject
Created in NX5.0.0 |
InheritableTextBuilder |
Represents a builder for an inheritable text value in of a CAM.CAMObject
Created in NX5.0.0 |
InheritableToolDepBuilder |
Represents a builder for an inheritable tool dependent value in of a CAM.CAMObject
Created in NX5.0.0 |
InitialProfilePlunge |
Represents the initial profile plunge .
|
InPathEventDataBuilder |
Represents a InPath Event Data Builder
To create a new instance of this class, use WedmCustomBoundaryDataBuilder.createInpathEventDataBuilder() Created in NX5.0.0 |
InPathEventDataBuilderList |
Represents a list of objects.
|
InPathEventSetData |
Represents in path event
This is a sub-builder class and cannot be directly instantiated . |
InspectionAlignmentAssistantBuilder |
Represents a CMM Inspection Alignment Assistant Builder,
this builder's Commit can produce more than one object,
the GetCommittedObjects can be used to get the objects
and the order of GetCommittedObject's output array is not stable.
|
InspectionAlignmentBuilder |
Represents a CMM Inspection Alignment builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionAlignmentBuilder(nxopen.cam.CAMObject) Created in NX7.5.2 |
InspectionAnalyzeBuilder |
Inspection Analyze options dialog builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionAnalyzeBuilder(nxopen.cam.CAMObject) Created in NX8.5.0 |
InspectionAnalyzeOutputBuilder |
Inspection Analyze Output options dialog builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionAnalyzeOutputBuilder(nxopen.cam.CAMObject) Created in NX8.5.1 |
InspectionArcFeatureBuilder |
Represents a CMM Inspection Arc Feature builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionArcFeatureBuilder(nxopen.cam.CAMObject) Created in NX7.0.0 |
InspectionAxisExtrapolationModeBuilder |
Represents a builder for an inheritable axis extrapolation mode enum value .
|
InspectionCircleFeatureBuilder |
Represents a CMM Inspection Circle Feature builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionCircleFeatureBuilder(nxopen.cam.CAMObject) Created in NX7.0.0 |
InspectionCmmCommandBuilder |
Represents a CMM Inspection miscellaneous command builder.
|
InspectionCollisionAvoidanceBuilder |
Collision Avoidance Dialog builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionCollisionAvoidanceBuilder(nxopen.cam.CAMObject) Created in NX8.0.0 |
InspectionConeFeatureBuilder |
Represents a CMM Inspection Cone Feature builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionConeFeatureBuilder(nxopen.cam.CAMObject) Created in NX7.0.0 |
InspectionConstructedFeatureBuilder |
Represents a CMM Inspection Constructed Feature Builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionConstructedFeatureBuilder(nxopen.cam.CAMObject) Created in NX7.0.0 |
InspectionCparlnFeatureBuilder |
Represents a CMM Inspection Cparln Feature Builder.
|
InspectionCreatePathsBuilder |
Create Paths Dialog builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionCreatePathsBuilder(nxopen.cam.CAMObject) Created in NX7.0.0 |
InspectionCurveFeatureBuilder |
Represents a CMM Inspection Curve Feature builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionCurveFeatureBuilder(nxopen.cam.CAMObject) Created in NX7.0.0 |
InspectionCylinderCircleFitModeBuilder |
Represents a builder for an inheritable cylinder/circle fitting mode enum value .
|
InspectionCylinderFeatureBuilder |
Represents a CMM Inspection Cylinder Feature builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionCylinderFeatureBuilder(nxopen.cam.CAMObject) Created in NX7.0.0 |
InspectionDatumPlaneFittingModeBuilder |
Represents a builder for an inheritable datum plane fitting mode enum value .
|
InspectionDeleteMeaPtsBuilder |
Inspection Delete Analyze Points dialog builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionDeleteMeaPtsBuilderSel(nxopen.cam.CAMObject[]) Created in NX9.0.1 |
InspectionDeltaMoveBuilder |
Represents the builder for the CMM Inspection sub-operation Delta Move.
|
InspectionEdgePointFeatureBuilder |
Represents a CMM Inspection Edge Point Feature builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionEdgePointFeatureBuilder(nxopen.cam.CAMObject) Created in NX9.0.0 |
InspectionGraphicalReportBuilder |
Represents the builder for the CMM Inspection Graphical Report Operation
To create a new instance of this class, use InspectionOperationCollection.createGraphicalReportBuilder(nxopen.cam.CAMObject) Created in NX10.0.3 |
InspectionGraphicalReportOutputBuilder |
Represents the builder for Inspection Graphical Report Output.
|
InspectionGroup |
Represents a group for CMM Inspection
To obtain an instance of this class us InspectionGroupCollection Created in NX7.0.0 |
InspectionGroupCollection |
Represents the group collection for CMM Inspection
To obtain an instance of this class, refer to InspectionSetup Created in NX7.0.0 |
InspectionImportDmisBuilder |
Inspection Import Dmis dialog builder
To create a new instance of this class, use InspectionOperationCollection.createImportDmisBuilder(nxopen.cam.InspectionGroup) Created in NX11.0.1 |
InspectionLimitsOfSizeModeBuilder |
Represents a builder for an inheritable limits of size mode enum value .
|
InspectionLinear5axisMoveToPointBuilder |
Represents the builder for the CMM Inspection sub-operation Linear 5axis Move To Point.
|
InspectionLinearMoveToPointBuilder |
Represents the builder for the CMM Inspection sub-operation Linear Move To Point.
|
InspectionLineFeatureBuilder |
Represents a CMM Inspection Line Feature builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionLineFeatureBuilder(nxopen.cam.CAMObject) Created in NX7.0.0 |
InspectionLinkPmiBuilder |
Create Link PMI Dialog Builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionLinkPmiBuilder(nxopen.cam.CAMObject) Created in NX7.0.0 |
InspectionMeasDataBuilder |
Inspection Measured Data dialog builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionMeasDataBuilder(nxopen.cam.CAMObject) Created in NX8.5.0 |
InspectionMeasurePointBuilder |
Represents the builder for the CMM Inspection sub-operation Measure Point.
|
InspectionMethodBuilder |
Represents the builder for a CMM Inspection method.
|
InspectionMoveBuilder |
Represents CMM Inspection Move Builder
This cannot be instantiated . |
InspectionMoveCollection |
Represents the Inspection move collection
To obtain an instance of this class, refer to InspectionOperation Created in NX7.0.0 |
InspectionMoveSubop |
Represents CMM Inspection Move
To obtain an instance of this class use InspectionMoveCollection Created in NX7.0.0 |
InspectionMoveSubopCollection |
Represents the Inspection move collection contained by point set subops
To obtain an instance of this class, refer to InspectionMoveSubop Created in NX7.0.0 |
InspectionOperation |
Represents an Inspection operation
To obtain an instance of this class use InspectionOperationCollection Created in NX7.0.0 |
InspectionOperationCollection |
Represents the CMM Inspection operation collection
To obtain an instance of this class, refer to InspectionSetup Created in NX7.0.0 |
InspectionOperationTransformBuilder |
Create transformed inspection operations,
this builder's Commit can produce more than one object,
the GetCommittedObjects can be used to get the objects
and the order of GetCommittedObject's output array is not stable.
|
InspectionOutputOperationBuilder |
this class creates the output operation
To create a new instance of this class, use InspectionOperationCollection.createInspectionOutputOperationBuilder(nxopen.cam.CAMObject) Created in NX7.0.0 |
InspectionParplnFeatureBuilder |
Represents a CMM Inspection Parpln Feature Builder.
|
InspectionPathBuilder |
Represents the builder for a CMM Inspection path.
|
InspectionPathPointBuilder |
Represents an inspection path point builder .
|
InspectionPatternFeatureBuilder |
Represents a CMM Inspection Pattern Feature builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionPatternFeatureBuilder(nxopen.cam.CAMObject) Created in NX7.0.0 |
InspectionPlaneFeatureBuilder |
Represents a CMM Inspection Plane Feature builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionPlaneFeatureBuilder(nxopen.cam.CAMObject) Created in NX7.0.0 |
InspectionPointFeatureBuilder |
Represents a CMM Inspection Point Feature builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionPointFeatureBuilder(nxopen.cam.CAMObject) Created in NX7.0.0 |
InspectionPolarGridBuilder |
Represents the builder for the CMM Inspection Polar Grid sub-operation.
|
InspectionProbeTipTypeBuilder |
Represents a builder for an inheritable probe tip type value .
|
InspectionProbeToolBuilder |
Represents an Inspection Probe Tool Builder
To create a new instance of this class, use InspectionGroupCollection.createInspectionProbeToolBuilder(nxopen.cam.CAMObject) Created in NX9.0.0 |
InspectionProbeTrackingBuilder |
Represents a InspectionProbeTracking builder
To create a new instance of this class, use InspectionTool.createInspectionProbeTrackingBuilder(nxopen.cam.ProbeTrackPoint) Created in NX9.0.0 |
InspectionProfileDispositionModeBuilder |
Represents a builder for an inheritable profile disposition mode enum value .
|
InspectionReferenceFeatureModeBuilder |
Represents a builder for an inheritable reference feature mode enum value .
|
InspectionSaveToLayerBuilder |
Inspection Analyze Save to Layer dialog builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionSaveToLayerBuilderSel(nxopen.cam.CAMObject[]) Created in NX9.0.1 |
InspectionScanArcBuilder |
Represents the builder for the CMM Inspection sub-operation Scan Arc.
|
InspectionScanCurve5AxisBuilder |
Represents the builder for the CMM Inspection sub-operation Scan Curve.
|
InspectionScanCurveBuilder |
Represents the builder for the CMM Inspection sub-operation Scan Curve.
|
InspectionScanHelixBuilder |
Represents the builder for the CMM Inspection sub-operation Scan Helix.
|
InspectionScanLineBuilder |
Represents the builder for the CMM Inspection sub-operation Scan Line.
|
InspectionSensorBuilder |
Represents the builder for a CMM Inspection Sensor.
|
InspectionSensorMassEditBuilder |
Edit Multiple Subops Dialog builder
To create a new instance of this class, use InspectionMoveCollection.createInspectionSensorMassEditBuilder(nxopen.cam.InspectionMoveSubop) Created in NX7.5.3 |
InspectionSensorStrategyBuilder |
Represents a builder for an inheritable sensor strategy enum value .
|
InspectionSetup | |
InspectionSphereFeatureBuilder |
Represents a CMM inspection sphere feature builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionSphereFeatureBuilder(nxopen.cam.CAMObject) Created in NX7.0.0 |
InspectionSurfaceFeatureBuilder |
Represents a CMM Inspection Curve Feature builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionSurfaceFeatureBuilder(nxopen.cam.CAMObject) Created in NX7.0.0 |
InspectionSurfaceProfileModeBuilder |
Represents a builder for an inheritable datum plane fitting mode enum value .
|
InspectionToleranceOperationBuilder |
this class creates the tolerance operation
To create a new instance of this class, use InspectionOperationCollection.createInspectionToleranceOperationBuilder(nxopen.cam.CAMObject) Created in NX7.0.0 |
InspectionTool |
Represents an Inspection group
To obtain an instance of this class use InspectionGroupCollection Created in NX7.0.0 |
InspectionTorusFeatureBuilder |
Represents a CMM Inspection Torus Feature builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionTorusFeatureBuilder(nxopen.cam.CAMObject) Created in NX7.0.0 |
InspectionTrackPointCollection |
Represents the inspection track point collection
To obtain an instance of this class, refer to InspectionTool Created in NX7.0.0 |
InspectionUVGridBuilder |
Represents the builder for the CMM Inspection UV Grid sub-operation.
|
InterpolateAngle |
Represents builder of Interpolate Angle, one option of Tool Axis .
|
InterpolateVector |
Represents builder of Interpolate Vector, one option of Tool Axis .
|
IpwAnalysisBuilder |
Represents a
IpwAnalysisBuilder
This is an abstract class, and cannot be instantiated. |
IpwContainmentCurvesBuilder |
Represents a
IpwContainmentCurvesBuilder
This is an abstract class, and cannot be instantiated. |
LaserCircleCutout |
Represents a LaserCircleCutout
To create a new instance of this class, use MoveCollection.createLaserCircleCutout(nxopen.cam.Move) Created in NX9.0.0 |
LaserControlPoint |
Represents a Laser Control Point builder
To create a new instance of this class, use LaserProfileMove.createControlPoint(int, nxopen.Point, nxopen.CartesianCoordinateSystem, int, boolean, nxopen.NXObject, int) Created in NX9.0.0 |
LaserControlPointList |
Represents a list of objects.
|
LaserCutDirection |
Represents cut direction settings for laser move .
|
LaserCutoutDefinition |
Represents cutout definition settings for laser move .
|
LaserHeadOrientation |
Represents head orientation settings for laser sub move .
|
LaserHexagonCutout |
Represents a LaserHexagonCutout
To create a new instance of this class, use MoveCollection.createLaserHexagonCutout(nxopen.cam.Move) Created in NX9.0.0 |
LaserLinearMove |
Represents a LaserLinearMove
To create a new instance of this class, use MoveCollection.createLaserLinearMove(nxopen.cam.Move) Created in NX9.0.0 |
LaserMethod |
Represents a Laser Method
To create a new instance of this class, use NCGroupCollection.createLaserMethod(nxopen.cam.CAMObject) Created in NX9.0.0 |
LaserPiercingPoint |
Represents piercing point settings for laser move .
|
LaserProfileMove |
Represents a LaserProfileMove
To create a new instance of this class, use MoveCollection.createLaserProfileMove(nxopen.cam.Move) Created in NX9.0.0 |
LaserRectangleCutout |
Represents a LaserRectangleCutout
To create a new instance of this class, use MoveCollection.createLaserRectangleCutout(nxopen.cam.Move) Created in NX9.0.0 |
LaserSlotCutout |
Represents a LaserSlotCutout
To create a new instance of this class, use MoveCollection.createLaserSlotCutout(nxopen.cam.Move) Created in NX9.0.0 |
LaserTeachMode |
Represents a Laser TeachMode
To create a new instance of this class, use OperationCollection.createLaserTeachMode(nxopen.cam.CAMObject) Created in NX9.0.0 |
LaserTool |
Represents a Laser Tool
To create a new instance of this class, use NCGroupCollection.createLaserTool(nxopen.cam.CAMObject) Created in NX9.0.0 |
LatheMachineControl |
Represents a Lathe Machine Control operation
To create or edit an instance of this class, use LatheMachineControlBuilder Created in NX7.5.0 |
LatheMachineControlBuilder |
Represents a LatheMachineControl Builder
To create a new instance of this class, use OperationCollection.createLatheMachineControlBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
LatheUserDefined |
Represents a Lathe User Defined operation
To create or edit an instance of this class, use LatheUserDefinedBuilder Created in NX7.5.0 |
LatheUserDefinedBuilder |
Represents a LatheUserDefined Builder
To create a new instance of this class, use OperationCollection.createLatheUserDefinedBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
LayoutCiBuilder |
Represents a layout ci Builder .
|
LeadAngles |
Represents a lead angles .
|
LevelToLevel | |
LowerLimit | |
MachineGroupBuilder |
Represents a MachineGroup Builder
To create a new instance of this class, use NCGroupCollection.createMachineGroupBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
MachineHeadGroupBuilder |
Represents a MachineHeadGroup Builder
To create a new instance of this class, use NCGroupCollection.createMachineHeadGroupBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
MachinePocketGroupBuilder |
Represents a MachinePocketGroup Builder
To create a new instance of this class, use NCGroupCollection.createMachinePocketGroupBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
MachineTurretGroupBuilder |
Represents a MachineTurretGroup Builder
To create a new instance of this class, use NCGroupCollection.createMachineTurretGroupBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
MachiningFeature |
Represents a
CAMFeature builder To obtain an instance of this class use FeatureRecognitionBuilder Created in NX8.0.0 |
MachiningFeatureGeom |
This class represent the builder for machining feature geometry
.
|
MachiningRegionBuilder |
Represents a Machining Region Builder .
|
ManageToolPartBuilder |
Represents an Export Tool Part Builder
This is an abstract class, and cannot be instantiated. |
ManualControl |
Represents a ManualControl operation
To create or edit an instance of this class, use ManualControlBuilder Created in NX10.0.3 |
ManualControlBuilder |
Represents a ManualControl Operation Builder
To create a new instance of this class, use OperationCollection.createManualControlBuilder(nxopen.cam.CAMObject) Created in NX10.0.3 |
ManualFeatureBuilder |
Represents a
ManualFeatureBuilder
To obtain an instance of this class use FeatureRecognitionBuilder Created in NX6.0.0 |
ManualFeatureBuilderList |
Represents a list of objects.
|
ManualMove |
Represents Manual Move
To obtain an instance of this class us OperationCollection Created in NX4.0.0 |
MapFeatureTeaching |
Represents a MapFeatureTeaching Builder
To create a new instance of this class, use CAMSetup.createMapFeatureTeaching(nxopen.cam.CAMObject) Created in NX10.0.3 NX_REMOVE_FROM_JAVA_API |
MaxCutTraverse | |
MergeSubopCommand |
Represents an Merge Subop Command Builder .
|
Method |
Represents a Method Group
To create or edit an instance of this class, use MethodBuilder Created in NX7.5.0 |
MethodBuilder |
Represents a Method Builder
This is an abstract class, and cannot be instantiated. |
MillAreaGeomBuilder |
Represents a MillAreaGeom Builder
To create a new instance of this class, use NCGroupCollection.createMillAreaGeomBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
MillBoundaryGeomBuilder |
Represents a MillBoundaryGeom Builder
To create a new instance of this class, use NCGroupCollection.createMillBoundaryGeomBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
MillCutParameters | |
MillFormToolBuilder |
Represents a MillForm Tool Builder
To create a new instance of this class, use NCGroupCollection.createMillFormToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
MillGeomBuilder |
Represents a MillGeom Builder
To create a new instance of this class, use NCGroupCollection.createMillGeomBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
MillingToolBuilder |
Represents a MillingTool Builder
This is an abstract class, and cannot be instantiated. |
MillingTrackpointBuilder |
Represents a Milling Trackpoint Builder .
|
MillMachineControl |
Represents a Mill Machine Control operation
To create or edit an instance of this class, use MillMachineControlBuilder Created in NX7.5.0 |
MillMachineControlBuilder |
Represents a MillMachineControl Builder
To create a new instance of this class, use OperationCollection.createMillMachineControlBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
MillMethodBuilder |
Represents a Mill Method Builder
To create a new instance of this class, use NCGroupCollection.createMillMethodBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
MillOperation |
Represents a Mill operation
To create or edit an instance of this class, use MillOperationBuilder Created in NX7.5.0 |
MillOperationBuilder |
Represents a MillOperation Builder
This is an abstract class and cannot be instantiated. |
MillOrientGeomBuilder |
Represents a MillOrientGeom Builder
To create a new instance of this class, use NCGroupCollection.createMillOrientGeomBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
MillTextGeomBuilder |
Represents a MillTextGeom Builder
To create a new instance of this class, use NCGroupCollection.createMillTextGeomBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
MillToolBuilder |
Represents a Mill Tool Builder
To create a new instance of this class, use NCGroupCollection.createMillToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
MillToolProbing |
Represents a Mill Tool operation
To create or edit an instance of this class, use MillToolProbingBuilder Created in NX8.5.1 |
MillToolProbingBuilder |
Represents a Mill Tool Probing Builder
To create a new instance of this class, use OperationCollection.createMillToolProbingBuilder(nxopen.cam.CAMObject) Created in NX8.5.1 |
MillUserDefined |
Represents a Mill User Defined operation
To create or edit an instance of this class, use MillUserDefinedBuilder Created in NX7.5.0 |
MillUserDefinedBuilder |
Represents a MillUserDefined Builder
To create a new instance of this class, use OperationCollection.createMillUserDefinedBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
MillVolumeGeomBuilder |
Represents a MillVolumeGeom Builder
To create a new instance of this class, use NCGroupCollection.createMillVolumeGeomBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
MinCutDepth | |
MinCutLength |
Represents a
MinCutLength |
MinCutVolume | |
MirrorBuilder |
Represents a Mirror Builder.
|
Move | |
MoveBuilder |
Represents Move Builder
This cannot be instantiated . |
MoveCollection |
Represents the move collection
To obtain an instance of this class, refer to Operation Created in NX5.0.0 |
MoveToPointBuilder |
Represents the Move To Point Builder
To create a new instance of this class, use MoveCollection.createMoveToPointBuilder(nxopen.cam.Move) Created in NX5.0.0 |
MultiBladeBaseGeometry |
Represents a selectoin geometry Builder
This is an abstract class and cannot be instantiated. |
MultiBladeGeomBuilder |
Represents a MultiBladeGeomBuilder Builder
To create a new instance of this class, use NCGroupCollection.createMultiBladeGeometryBuilder(nxopen.cam.CAMObject) Created in NX7.0.0 |
MultiBladeSplittersGeometry |
Represents a selectoin list geometry Builder
This is an abstract class and cannot be instantiated. |
MultiDepthCut | |
MultiplePassesBuilder |
Represents a MultiplePassesBuilder .
|
MultipleStepoverBuilder |
Represents a Builder which holds the data for a set of individual number of passes and
stepover distance.
|
MultiRamp | |
MultiToolBuilder |
Represents a MultiTool Builder
To create a new instance of this class, use NCGroupCollection.createMultiToolBuilder(nxopen.cam.CAMObject) Created in NX11.0.1 |
NCAssistantBuilder |
Represents a NCAssistant Builder
To create a new instance of this class, use CAMSetup.createNCAssistantBuilder() Default values. |
NCGroup | |
NCGroupBuilder |
Represents a NCGroup Builder
This is an abstract class, and cannot be instantiated. |
NCGroupCollection |
Represents the ncgroup collection
To obtain an instance of this class, refer to CAMSetup Created in NX4.0.0 |
NcmAvoidancePointBuilder | |
NcmClearanceBuilder | |
NcmctPartMountingBuilder |
Represents a
NcmctPartMountingBuilder
a "commit" of this object will perform the Part Mounting and no object is returned. |
NcmEngRetBuilder |
Represents a builder for an inheritable double value in of a CAM.CAMObject
Created in NX9.0.3 |
NcmHoleDrilling | |
NcmHoleMachining | |
NcmHoleMachiningEngRet |
Represents a builder for an inheritable double value in of a CAM.CAMObject
Created in NX7.5.0 |
NcmLaserEngage |
Represents Engage settings for laser non cutting moves .
|
NcmLaserRetract |
Represents Retract settings for laser non cutting moves .
|
NcmOptimizeGroup | |
NcmPlanarBuilder | |
NcmPlanarEngRetBuilder |
Represents a builder for an inheritable double value in of a CAM.CAMObject
Created in NX5.0.0 |
NcmScBuilder | |
NcmScEngRetBuilder |
Represents a builder for an inheritable double value in of a CAM.CAMObject
Created in NX5.0.0 |
NcmSmoothingBuilder | |
NcmSubopBuilder | |
NcmTransfer | |
NcmTransferBuilder | |
NcmTransferTypes | |
NcmTurningBuilder |
Represents a CAM.NcmTurningBuilder
Created in NX6.0.0 |
NcmTurnRoughBuilder |
Represents a CAM.NcmTurnRoughBuilder
Created in NX6.0.0 |
NcmTurnRoughFinishBuilder |
Represents a CAM.NcmTurnRoughFinishBuilder
Created in NX6.0.0 |
NcmTurnThreadBuilder |
Represents a CAM.NcmTurnThreadBuilder
Created in NX6.0.0 |
NcmWedmBuilder |
Represents a CAM.NcmWedmBuilder
Created in NX7.5.0 |
NormalToToolAxisMoveBuilder |
Represents the Move To Point Builder
To create a new instance of this class, use MoveCollection.createNormalToToolAxisMoveBuilder(nxopen.cam.Move) Created in NX5.0.0 |
Notes |
Represents notes .
|
ObjectContainer |
Represents a Cam Objects Builder .
|
ObjectNotes |
Represents an Object Notes
To create a new instance of this class, use CAMSetup.createObjectNotes(nxopen.cam.CAMObject) Created in NX9.0.0 |
ObjectsFeedsBuilder |
Represents an Object Action Feeds Builder
To create a new instance of this class, use CAMSetup.createFeedsBuilder(nxopen.cam.CAMObject[]) Created in NX6.0.0 |
ObjectsUdeSet |
Represents an Object Action Ude Set Builder
To create a new instance of this class, use CAMSetup.createObjectsUdeSet(nxopen.cam.CAMObject[], nxopen.cam.CAMSetup.Ude) Created in NX6.0.0 |
ObjectWorkInstructionBuilder |
Represents an Object Work Instruction
To create a new instance of this class, use CAMSetup.createObjectWorkInstructionBuilder(nxopen.cam.CAMObject) Created in NX9.0.3 |
OffsetDataBuilder |
Represents the Offset Point Data Builder .
|
Operation |
Represents an operation
To create or edit an instance of this class, use OperationBuilder Created in NX4.0.0 |
OperationBuilder |
Represents a Opr Builder
This is an abstract class, and cannot be instantiated. |
OperationCollection |
Represents the operation collection
To obtain an instance of this class, refer to CAMSetup Created in NX4.0.0 |
OperationDisplayOptionsBuilder |
Represents a display options Builder
This is an abstract class and cannot be instantiated. |
OperationSetTeaching |
Represents a OperationSetTeaching Builder
To create a new instance of this class, use CAMSetup.createOperationSetTeaching(nxopen.cam.CAMObject) Created in NX10.0.2 NX_REMOVE_FROM_JAVA_API |
OperationTeaching |
Represents a OperationTeaching Builder
To create a new instance of this class, use CAMSetup.createOperationTeaching(nxopen.cam.CAMObject) Created in NX8.0.0 |
OperationTransformBuilder |
OperationTransformBuilder
To create a new instance of this class, use CAMSetup.createOperationTransformBuilder(nxopen.cam.CAMObject[]) Created in NX6.0.0 |
OppositeDirection |
Represents OppositeDirection .
|
OptimizeFeatureGeometry |
Represents an optimize feature geometry builder
This is an abstract class and cannot be instantiated. |
OptimizeTraverseGroupBuilder |
Represents a OptimizeTraverseGroup Builder
To create a new instance of this class, use NCGroupCollection.createOptimizeTraverseGroupBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
OrientGeomBuilder |
Represents a OrientGeom Builder
This is an abstract class, and cannot be instantiated. |
OrientGeometry |
Represents a Orient Group
To create or edit an instance of this class, use OrientGeomBuilder Created in NX7.5.0 |
OutputUncutRegions | |
ParamBuilder |
Represents a manufacturing object builder.
|
PartAxisBuilder |
Represents a part axis builder.
|
Path |
Represets a Cam Tool Path
This is a Subobject and cannot be publicly instantiated. |
PathCircularMotion |
This class represents the data of a Linear Motion .
|
PathContactMotion |
This class represents the data of a Linear Motion .
|
PathDisplay |
Represents a class that is used for NX testing.
|
PathDisplayColors |
Represents a path display colors Builder
This is an abstract class and cannot be instantiated. |
PathEvent |
Represets a Cam Tool Path Event
This is a Subobject and cannot be publicly instantiated. |
PathHelixMotion |
This class represents the data of a Linear Motion .
|
PathLaserDepositionData |
Definition for Laser deposition data .
|
PathLaserGeometryData |
Definition for Laser geometry data .
|
PathLaserMachineData |
Definition for Laser machine data .
|
PathLaserOptimizationData |
Definition for Laser optimization data .
|
PathLaserPowderData |
Definition for Laser powder data .
|
PathLaserProcessorData |
Definition for Laser processor data .
|
PathLevelMarker |
This class represents the data of a Linear Motion .
|
PathLinearMotion |
This class represents the data of a Linear Motion .
|
PatternTypeBuilder |
Represents a Guided Curve pattern type builder
This is an abstract class and cannot be instantiated. |
PitchSetting | |
PlanarMilling |
Represents a Planar Milling Operation
To create or edit an instance of this class, use PlanarMillingBuilder Created in NX7.5.0 |
PlanarMillingBuilder |
Represents a PlanarMilling Builder
To create a new instance of this class, use OperationCollection.createPlanarMillingBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
PlanarOperation |
Represents a Planar operation
To create or edit an instance of this class, use PlanarOperationBuilder Created in NX7.5.0 |
PlanarOperationBuilder |
Represents a PlanarOperation Builder
This is an abstract class and cannot be instantiated. |
PlungeMilling |
Represents a Plunge Milling Operation
To create or edit an instance of this class, use PlungeMillingBuilder Created in NX7.5.0 |
PlungeMillingBuilder |
Represents a PlungeMilling Builder
To create a new instance of this class, use OperationCollection.createPlungeMillingBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
PmopToolAxisCiBuilder |
Represents a PmopToolAxisCiBuilder
This is an abstract class, and cannot be instantiated. |
PointToPointBuilder |
Represents a Point to Point Builder (Drilling)
To create a new instance of this class, use OperationCollection.createPointToPointBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
PostEventsCiBuilder |
Represents a PostEventsCiBuilder .
|
Preferences |
Represents a cam preferences Builder
To create a new instance of this class, use CAMSession.createCamPreferences() Created in NX7.5.0 |
PreprocessGeometryBuilder |
Represents a Preprocess Geometry Builder
To create a new instance of this class, use CAMSetup.createPreprocessGeometryBuilder() Created in NX6.0.0 |
ProbeCalibrateLengthMoveBuilder |
Represents the Probe Calibrate Length Move Builder
To create a new instance of this class, use MoveCollection.createProbeCalibrateLengthMoveBuilder(nxopen.cam.Move) Created in NX5.0.0 |
ProbeCalibrateSphereMoveBuilder |
Represents the Probe Calibrate Sphere Move Builder
To create a new instance of this class, use MoveCollection.createProbeCalibrateSphereMoveBuilder(nxopen.cam.Move) Created in NX5.0.0 |
ProbeCalibrateStylusMoveBuilder |
Represents the Probe Calibrate Stylus Move Builder
To create a new instance of this class, use MoveCollection.createProbeCalibrateStylusMoveBuilder(nxopen.cam.Move) Created in NX5.0.0 |
ProbeClearanceMoveBuilder |
Represents the Probe Clearance Move Builder
To create a new instance of this class, use MoveCollection.createProbeClearanceMoveBuilder(nxopen.cam.Move) Created in NX5.0.0 |
ProbeControlParametersBuilder | |
ProbeInspectBorebossMoveBuilder |
Represents the Probe Inspect Bore Boss Move Builder
To create a new instance of this class, use MoveCollection.createProbeInspectBorebossMoveBuilder(nxopen.cam.Move) Created in NX5.0.0 |
ProbeInspectPointMoveBuilder |
Represents the Probe Inspect Point Move Builder
To create a new instance of this class, use MoveCollection.createProbeInspectPointMoveBuilder(nxopen.cam.Move) Created in NX5.0.0 |
ProbeInspectSurfacePointMoveBuilder |
Represents the Probe Inspect Surface Point Move Builder
To create a new instance of this class, use MoveCollection.createProbeInspectSurfacePointMoveBuilder(nxopen.cam.Move) Created in NX5.0.0 |
ProbeOutputControl | |
ProbeParamsBuilder |
Represents the Probe Params Builder
This builder cannot be instantiated separately. |
ProbeProtectedParametersBuilder |
Represents the Probe Protected Parameters Builder .
|
ProbeStockParametersBuilder |
Represents the Probe Stock Parameters Builder .
|
ProbeToleranceParametersBuilder | |
ProbeToolBuilder |
Represents a Probe Tool Builder
To create a new instance of this class, use NCGroupCollection.createProbeToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
ProbeTrackingBuilder |
Represents a ProbeTracking Builder
To create a new instance of this class, use Tool.createProbeTrackingBuilder(nxopen.cam.ProbeTrackPoint) Created in NX5.0.0 |
ProbeTrackPoint |
Represents an Track Point
To obtain an instance of this class us TrackPointCollection Created in NX4.0.0 |
ProfileStrategy |
Represents profile strategy .
|
ProgramOrderGroupBuilder |
Represents a ProgramOrderGroup Builder
To create a new instance of this class, use NCGroupCollection.createProgramOrderGroupBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
ProjVecCiBuilder |
Represents a tool axis ci Builder .
|
RadialGrooveMilling |
Represents a Radial Groove Milling Operation
To create or edit an instance of this class, use RadialGrooveMillingBuilder Created in NX9.0.3 |
RadialGrooveMillingBuilder |
Represents a RadialGrooveMilling Builder
To create a new instance of this class, use OperationCollection.createRadialGrooveMillingBuilder(nxopen.cam.CAMObject) Created in NX9.0.3 |
RampingMode |
Represents a ramping mode Builder .
|
ReliefCut |
Represents the relief cut .
|
ReliefPlunge | |
RobotCartesianMove |
represents the Rotary Move To Point Builder
To create a new instance of this class, use MoveCollection.createRobotCartesianMove(nxopen.cam.Move) Created in NX11.0.1 NX_REMOVE_FROM_JAVA_API |
RobotMountMove |
represents the Rotary Move To Point Builder
To create a new instance of this class, use MoveCollection.createRobotMountMove(nxopen.cam.Move) Created in NX11.0.1 NX_REMOVE_FROM_JAVA_API |
RobotPoseMove |
represents the Rotary Move To Point Builder
To create a new instance of this class, use MoveCollection.createRobotPoseMove(nxopen.cam.Move) Created in NX11.0.1 NX_REMOVE_FROM_JAVA_API |
RotaryFinishGeomBuilder |
Represents a rotary finish geometry builder.
|
RotaryPointMoveBuilder |
represents the Rotary Move To Point Builder
To create a new instance of this class, use MoveCollection.createRotaryPointMoveBuilder(nxopen.cam.Move) Created in NX5.0.0 |
RotaryPolarMoveBuilder |
Represents the Rotary Polar Builder
To create a new instance of this class, use MoveCollection.createRotaryPolarMoveBuilder(nxopen.cam.Move) Created in NX5.0.0 |
RotateToolMoveBuilder |
Represents the Rotate Tool Move Builder
To create a new instance of this class, use MoveCollection.createRotateToolMoveBuilder(nxopen.cam.Move, nxopen.cam.Move) Created in NX5.0.0 |
RoughFinishTurning |
Represents a Turn Rough Finish operation
To create or edit an instance of this class, use RoughFinishTurningBuilder Created in NX7.5.0 |
RoughFinishTurningBuilder |
Represents a RoughFinishTurning Builder
This is an abstract class and cannot be instantiated. |
RoughTurning |
Represents a Turn Rough operation
To create or edit an instance of this class, use RoughTurningBuilder Created in NX7.5.0 |
RoughTurningBuilder |
Represents a RoughTurning Builder
To create a new instance of this class, use OperationCollection.createRoughTurningBuilder(nxopen.cam.CAMObject) Created in NX6.0.0 |
RoundPointBuilder |
Represents the round Point Builder .
|
SelectCAMFeature |
Represents a single object selection.
|
SelectCAMFeatureList |
Represents a list of objects on a selection list.
|
Sequence |
Represents Sequence Builder .
|
SimulationOptionsBuilder |
Represents a
SimulationOptionsBuilder
To create a new instance of this class, use KinematicConfigurator.createSimulationOptionsBuilder(nxopen.cam.SimulationOptionsBuilder.DialogType) Created in NX6.0.0 |
SmallAreaAvoidance |
Represents a SmallArea Builder .
|
SoftTool |
Represents a SoftTool
This is an abstract class, and cannot be instantiated. |
SolidToolBuilder |
Represents a SolidTool Builder
This is an abstract class, and cannot be instantiated. |
SolidTrackingBuilder |
Represents a SolidTracking Builder
To create a new instance of this class, use Tool.createSolidTrackingBuilder(nxopen.cam.SolidTrackPoint) Created in NX5.0.0 |
SolidTrackPoint |
Represents an Track Point
To obtain an instance of this class us TrackPointCollection Created in NX4.0.0 |
SplitSubopCommand |
Represents an Split Subop Command Builder
This cannot be instantiated . |
Splitter |
Represents a Splitter Builder
To create a new instance of this class, use MultiBladeSplittersGeometry.createSplitter(nxopen.NXObject[], nxopen.NXObject[]) Created in NX7.0.0 |
SplitterList |
Represents a list of objects.
|
SpringPasses |
Represents a spring passes .
|
SpunOutlineGeom |
Represents a spun outline geometry object for turning boundary .
|
SteepContainment | |
StepoverBuilder |
Represents a Stepover Builder .
|
StepParamsBuilder |
Represents a StepParams Builder .
|
StepUpBuilder |
Represents a StepUp Builder .
|
StockPerPassBuilder |
Represents a Builder which holds the data for a set of individual stock per pass.
|
StopPosition |
Represents a stop position .
|
StringList |
Represents a string list .
|
SurfaceContour |
Represents a Surface Contour operation
To create or edit an instance of this class, use SurfaceContourBuilder Created in NX7.5.0 |
SurfaceContourBuilder |
Represents a SurfaceContour Builder
To create a new instance of this class, use OperationCollection.createSurfaceContourBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
SurfaceDriveGeometry |
Represents a CAM drive geometry object for surface area .
|
SurfaceDriveGeometrySet |
Represents a geometry set for a CAM object.
|
SurfaceDriveGeometrySetList |
Represents a list of objects.
|
SurfaceRegions |
Represents a Surface Regions Builder
To create a new instance of this class, use CAMSetup.createSurfaceRegions(nxopen.features.Feature) Created in NX8.0.0 |
TabPointDataBuilder |
Represents a Tab Point Builder
To create a new instance of this class, use WedmCustomBoundaryDataBuilder.createTabPointDataBuilder() Created in NX5.0.0 |
TabPointDataBuilderList |
Represents a list of objects.
|
Teaching |
Represents a Teaching Builder
Abstract . |
TeachmodeEngageSettingsBuilder |
Represents a TeachmodeEngageSettingsBuilder
To create a new instance of this class, use OperationCollection.createTeachmodeTurningBuilder(nxopen.cam.CAMObject) Created in NX7.5.0 |
TeachmodeLinearMoveBuilder |
Represents a TeachmodeLinearMove
To create a new instance of this class, use OperationCollection.createTeachmodeTurningBuilder(nxopen.cam.CAMObject) Created in NX7.5.0 |
TeachmodeProfileMoveBuilder |
Represents a TeachmodeProfileMoveBuilder
To create a new instance of this class, use OperationCollection.createTeachmodeTurningBuilder(nxopen.cam.CAMObject) Created in NX7.5.0 |
TeachmodeRetractSettingsBuilder |
Represents a TeachmodeRetractSettings builder
To create a new instance of this class, use OperationCollection.createTeachmodeTurningBuilder(nxopen.cam.CAMObject) Created in NX7.5.0 |
TeachmodeTurning |
Represents a Turning Teachmode operation
To create or edit an instance of this class, use TeachmodeTurningBuilder Created in NX7.5.0 |
TeachmodeTurningBuilder |
Represents a TeachmodeTurningBuilder
To create a new instance of this class, use OperationCollection.createTeachmodeTurningBuilder(nxopen.cam.CAMObject) Created in NX7.5.0 |
ThreadCutParameters | |
ThreadedBossSet |
Represents a thread boss Geometry builder
To create a new instance of this class, use HoleBossGeom.createThreadedBossBuilder(nxopen.NXObject[], double, double, nxopen.NXObject, double, double, double, java.lang.String, double, int, nxopen.cam.HoleBossGeom.FormTypes, java.lang.String) Created in NX7.5.0 |
ThreadedBossSetList |
Represents a list of objects.
|
ThreadedHoleSet |
Represents a Cut Area Geometry builder
To create a new instance of this class, use HoleBossGeom.createThreadedHoleBuilder(nxopen.NXObject[], double, double, nxopen.NXObject, double, double, double, java.lang.String, java.lang.String, double, int, nxopen.cam.HoleBossGeom.FormTypes, java.lang.String, java.lang.String, int) Created in NX7.5.0 |
ThreadedHoleSetList |
Represents a list of objects.
|
ThreadMilling |
Represents a Thread Milling Operation
To create or edit an instance of this class, use ThreadMillingBuilder Created in NX7.5.0 |
ThreadMillingBuilder |
Represents a ThreadMilling Builder
To create a new instance of this class, use OperationCollection.createThreadMillingBuilder(nxopen.cam.CAMObject) Created in NX7.5.0 |
ThreadMillingCutParameters |
Represents a ThreadMillingCutParameters Builder .
|
ThreadToolBuilder |
Represents a Thread tool builder
To create a new instance of this class, use NCGroupCollection.createThreadToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
ThreadTurning |
Represents a Thread Turning operation
To create or edit an instance of this class, use ThreadTurningBuilder Created in NX7.5.0 |
ThreadTurningBuilder |
Represents a ThreadTurning Builder
To create a new instance of this class, use OperationCollection.createThreadTurningBuilder(nxopen.cam.CAMObject) Created in NX6.0.0 |
Tool | |
ToolAxisAdvanced |
Represents a Tool Axis Advanced Builder .
|
ToolAxisBase |
Represents a tool axis ci Builder .
|
ToolAxisChange | |
ToolAxisCiBuilder |
Represents a tool axis ci Builder .
|
ToolAxisFixed |
Represents a Tool Axis Fixed Builder .
|
ToolAxisInterpolate |
Represents a Tool Axis Interpolate Builder .
|
ToolAxisTilt |
Represents a builder for an inheritable double value in of a CAM.CAMObject
Created in NX6.0.0 |
ToolAxisVariable |
Represents a Tool Axis Variable Builder .
|
ToolBuilder |
Represents a Tool Builder
This is an abstract class, and cannot be instantiated. |
ToolChangeCiBuilder |
Represents a ToolChangeCiBuilder .
|
ToolChangePositionBuilder |
represents the Rotary Move To Point Builder
To create a new instance of this class, use MoveCollection.createToolChangePositionBuilder(nxopen.cam.Move) Created in NX11.0.2 NX_REMOVE_FROM_JAVA_API |
ToolPathDivideBuilder |
Represents a Tool Path Divide Builder
To create a new instance of this class, use CAMSetup.createToolPathDivideBuilder(nxopen.cam.CAMObject[]) Created in NX5.0.0 |
ToolPathEditorBuilder |
Represents a Tool Path Editor Builder
To create a new instance of this class, use Operation.createToolPathEditorBuilder() Default values. |
ToolPathSplitBuilder |
Represents a Tool Path Split Builder
To create a new instance of this class, use CAMSetup.createToolPathSplitBuilder(nxopen.cam.CAMObject[]) Created in NX6.0.0 |
ToolPathSplitItemBuilder |
Represents a ToolPathSplitItem builder
Use the ToolPathSplitBuilder class to create a ToolPathSplitItemBuilder object. |
ToolPathSplitItemBuilderList |
Represents a list of objects.
|
ToolPathSplitParametersBuilder |
Represents the Divide Parameters
This object is owned by another builder. |
ToolPathTiltAvoidance |
Represents a Tool Path Tilt Avoidance Builder
This is a sub-builder class and cannot be directly instantiated . |
ToolPathTiltBuilder |
Represents a Tool Path Tilt Builder
To create a new instance of this class, use CAMSetup.createToolPathTiltBuilder(nxopen.cam.CAMObject[]) Created in NX7.5.2 |
ToolPathTiltClearance |
Represents a Tool Path Tilt Clearance Builder
This is a sub-builder class and cannot be directly instantiated . |
ToolPathTiltMachine |
Represents a Tool Path Tilt Machine Builder
This is a sub-builder class and cannot be directly instantiated . |
ToolPathTiltTilting |
Represents a Tool Path Tilt Tilting Builder
This is a sub-builder class and cannot be directly instantiated . |
ToolPositioningBuilder |
Represents the Tool Positioning Builder .
|
ToolTrackingPointBuilder |
Represents the Tool Tracking Point Builder
To create a new instance of this class, use MoveCollection.createToolTrackingPointBuilder(nxopen.cam.Move) Created in NX8.5.1 |
Topology |
Represents a CAM topology builder
Use the Geometry class to get a topology builder Created in NX8.0.0 |
TrackingBuilder |
Represents a Tracking Builder .
|
TrackPoint |
Represents an Track Point
To obtain an instance of this class us TrackPointCollection Created in NX4.0.0 |
TrackpointBuilder |
Represents a Trackpoint Builder
This is an abstract class and can not be instantiated . |
TrackPointCollection |
Represents the track point collection
To obtain an instance of this class, refer to Tool Created in NX5.0.0 |
TrimPlane |
Represents Trim Plane .
|
TrimPoint |
Represents trim point .
|
TrochoidalSettings | |
TToolBuilder |
Represents a T Tool Builder
To create a new instance of this class, use NCGroupCollection.createTToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
TurnAvoidanceApproachBuilder |
Represents an avoidance start of engage Builder .
|
TurnAvoidanceClearanceBuilder |
Represents an avoidance start of engage Builder .
|
TurnAvoidanceDepartureBuilder |
Represents an avoidance start of engage Builder .
|
TurnAvoidanceFromBuilder |
Represents an avoidance from Builder .
|
TurnAvoidanceGeomBuilder |
Represents a TurnAvoidanceGeom Builder
To create a new instance of this class, use NCGroupCollection.createTurnAvoidanceGeomBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
TurnAvoidanceGohomeBuilder |
Represents an avoidance return Builder .
|
TurnAvoidancePathPointsBuilder |
Represents a turn avoidance path points builder .
|
TurnAvoidanceReturnBuilder |
Represents an avoidance return Builder .
|
TurnAvoidanceStartBuilder |
Represents an avoidance start Builder .
|
TurnAvoidanceStartOfEngageBuilder |
Represents an avoidance start of engage Builder .
|
TurnBoundaryGeomBuilder |
Represents a TurnBoundaryGeom Builder
To create a new instance of this class, use NCGroupCollection.createTurnBoundaryGeomBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
TurnConcaveCornerControl |
Represents a concave corner ja .
|
TurnCornerControl |
Represents a first plunge ja .
|
TurnCutParameters | |
TurnCutterClearance | |
TurnDirection |
Represents a direction .
|
TurnEngageRetractBuilder |
Represents a first plunge Builder .
|
TurnFeatureGeomBuilder |
Represents a TurnFeatureGeom Builder
To create a new instance of this class, use NCGroupCollection.createTurnFeatureGeomBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
TurnGeomBuilder |
Represents a TurnGeom Builder
To create a new instance of this class, use NCGroupCollection.createTurnGeomBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
TurnGrooveCornerControl |
Represents a groove corner control ja .
|
TurningOperation |
Represents a Turning operation
To create or edit an instance of this class, use TurningOperationBuilder Created in NX7.5.0 |
TurningOperationBuilder |
Represents a Turning Operation Builder
This is an abstract class and cannot be instantiated. |
TurningToolBuilder |
Represents a Turning tool builder
This is an abstract class, and cannot be instantiated. |
TurnMethodBuilder |
Represents a Turn Method Builder
To create a new instance of this class, use NCGroupCollection.createTurnMethodBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
TurnMoveToPointBuilder |
Represents the Move To Point Builder
To create a new instance of this class, use MoveCollection.createTurnMoveToPointBuilder(nxopen.cam.Move) Created in NX8.5.1 |
TurnOrientGeomBuilder |
Represents a TurnOrientGeom Builder
To create a new instance of this class, use NCGroupCollection.createTurnOrientGeomBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
TurnOrientWcs |
Represents an Turn Orient Wcs Builder
This is an abstract class, and cannot be instantiated. |
TurnOverlap | |
TurnPartProbing |
Represents a Turn Part Probing operation
To create or edit an instance of this class, use TurnPartProbingBuilder Created in NX8.5.1 |
TurnPartProbingBuilder |
Represents a Turn Part Probing Builder
To create a new instance of this class, use OperationCollection.createTurnPartProbingBuilder(nxopen.cam.CAMObject) Created in NX8.5.1 |
TurnProbeClearanceBuilder |
Represents an probe start of engage Builder
To create a new instance of this class, use MoveCollection.createTurnProbeClearanceBuilder(nxopen.cam.Move) Created in NX8.5.1 |
TurnProbeInspectPointMoveBuilder |
Represents the Turn Probe Inspect Point Move Builder
To create a new instance of this class, use MoveCollection.createTurnProbeInspectPointMoveBuilder(nxopen.cam.Move) Created in NX8.5.1 |
TurnRoughFinishLocalReturnBuilder |
Represents an avoidance start Builder .
|
TurnRoughFinishTestCut |
Represents a test cut builder .
|
TurnRoughVariableIncrementBuilder |
Represents a Variable Increment Builder .
|
TurnStock | |
TurnThreadEngageRetractBuilder |
Represents a Thread Turning Engage or Retract Builder .
|
TurnThreadFinishPassesBuilder |
Represents a TurnThreadFinishPasses Builder .
|
TurnToolBuilder |
Represents a Turn tool builder
To create a new instance of this class, use NCGroupCollection.createTurnToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
TurnToolProbing |
Represents a Turn tool operation
To create or edit an instance of this class, use TurnToolProbingBuilder Created in NX8.5.1 |
TurnToolProbingBuilder |
Represents a Turn tool probing Builder
To create a new instance of this class, use OperationCollection.createTurnToolProbingBuilder(nxopen.cam.CAMObject) Created in NX8.5.1 |
Ude |
Represets a User Defined Event
To create a new instance of this class, use UdeSet.createUde() Created in NX7.0.0 |
UdeList |
Represents a list of objects.
|
UdeMoveBuilder |
Represents the Ude Move Builder
To create a new instance of this class, use MoveCollection.createUdeMoveBuilder(nxopen.cam.Move) Created in NX5.0.0 |
UdeParameter |
Represents a User Defined Event Parameter .
|
UdeSet |
Represets a set of User Defined Events .
|
UdtSectionBuilder |
Represents a UdtSection Builder .
|
UpDownCutting | |
UserDefinedMoveBuilder |
Represents the User Defined Move Builder
To create a new instance of this class, use MoveCollection.createUserDefinedMoveBuilder(nxopen.cam.Move, java.lang.String) Created in NX8.0.0 |
UserDefinedOpr |
Represents a User Defined operation
To create or edit an instance of this class, use UserDefinedOprBuilder Created in NX7.5.0 |
UserDefinedOprBuilder |
Represents a UserDefinedOpr Builder
This is an abstract class, and cannot be instantiated. |
VariableZLevelMilling |
Represents a Variable Z Level Milling Operation
To create or edit an instance of this class, use VazlMillingBuilder Created in NX7.5.0 |
VazlMillingBuilder |
Represents a VazlMilling Builder
To create a new instance of this class, use OperationCollection.createVazlMillingBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
VectorDistanceMoveBuilder |
Represents the Vector Distance Move Builder
To create a new instance of this class, use MoveCollection.createVectorDistanceMoveBuilder(nxopen.cam.Move) Created in NX5.0.0 |
VerticalPosition |
Represents a VerticalPosition Builder .
|
VolumeBased25DMillingOperation |
Represents a Floor Wall Milling Operation
To create or edit an instance of this class, use VolumeBased25DMillingOperationBuilder Created in NX8.5.0 |
VolumeBased25DMillingOperationBuilder |
Represents a VolumeBased25DMillingOperation Builder
To create a new instance of this class, use OperationCollection.createVolumeBased25dMillingOperationBuilder(nxopen.cam.CAMObject) Created in NX8.5.0 |
WedmArcOutputTypeCiBuilder |
Represents a WedmArcOutputTypeCiBuilder .
|
WedmBasedGeomBuilder |
Represents a WedmBasedGeom Builder
To create a new instance of this class, use NCGroupCollection.createWedmBasedGeomBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
WedmCornerControlBuilder |
Represents a WedmCornerControl Builder
To create a new instance of this class, use NCGroupCollection.createWedmCornerControlBuilder(nxopen.cam.CAMObject) Created in NX6.0.0 |
WedmCustomBoundaryDataBuilder |
Represents a WedmCustomBoundaryData Builder
No Creator . |
WedmCustomBoundaryDataBuilderList |
Represents a list of objects.
|
WedmCutOrderBuilder |
Represents a
WedmCutOrderBuilder
This builder cannot be instantiated separately. |
WedmCutParameters | |
WedmCuttingBuilder |
Represents a WedmCutting Builder
To create a new instance of this class, use NCGroupCollection.createWedmCuttingBuilder(nxopen.cam.CAMObject) Created in NX6.0.0 |
WedmExtGeomBuilder |
Represents a WedmExtGeom Builder
To create a new instance of this class, use NCGroupCollection.createWedmExtGeomBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
WedmFeatureGeomBuilder |
Represents a WedmFeatureGeom Builder
To create a new instance of this class, use NCGroupCollection.createWedmFeatureGeomBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
WedmGeomBuilder |
Represents a WedmGeom Builder
To create a new instance of this class, use NCGroupCollection.createWedmGeomBuilder(nxopen.cam.CAMObject) Created in NX7.5.0 |
WedmIntGeomBuilder |
Represents a WedmIntGeom Builder
To create a new instance of this class, use NCGroupCollection.createWedmIntGeomBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
WedmLeadInOutBuilder |
Represents a WedmLeadInOut Builder
To create a new instance of this class, use NCGroupCollection.createWedmLeadInOutBuilder(nxopen.cam.CAMObject) Created in NX6.0.0 |
WedmMachineControl |
Represents a WEDM Machine Control operation
To create or edit an instance of this class, use WedmMachineControlBuilder Created in NX7.5.0 |
WedmMachineControlBuilder |
Represents a WedmMachineControl Builder
To create a new instance of this class, use OperationCollection.createWedmMachineControlBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
WedmMethodBuilder |
Represents a Wedm Method Builder
To create a new instance of this class, use NCGroupCollection.createWedmMethodBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
WedmMoveControlBuilder |
Represents a WedmMoveControl Builder
To create a new instance of this class, use NCGroupCollection.createWedmMoveControlBuilder(nxopen.cam.CAMObject) Created in NX6.0.0 |
WedmNocoreGeomBuilder |
Represents a WedmNocoreGeom Builder
To create a new instance of this class, use NCGroupCollection.createWedmNocoreGeomBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
WedmOpenGeomBuilder |
Represents a WedmOpenGeom Builder
To create a new instance of this class, use NCGroupCollection.createWedmOpenGeomBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
WedmOperationBuilder |
Represents a WedmOperation Builder
To create a new instance of this class, use OperationCollection.createWedmOperationBuilder(nxopen.cam.CAMObject) Created in NX7.5.0 |
WedmOrientGeomBuilder |
Represents a WedmOrientGeom Builder
To create a new instance of this class, use NCGroupCollection.createWedmOrientGeomBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
WedmPointDefinitionBuilder |
Represents a
WedmPointDefinitionBuilder
This builder cannot be instantiated separately. |
WedmStatusControlCiBuilder |
Represents a WedmStatusControlCiBuilder .
|
WedmStepoverBuilder | |
WedmUserDefined |
Represents a User Defined WEDM operation
To create or edit an instance of this class, use WedmUserDefinedBuilder Created in NX7.5.0 |
WedmUserDefinedBuilder |
Represents a WedmUserDefined Builder
To create a new instance of this class, use OperationCollection.createWedmUserDefinedBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
WireGuide |
Represents a wire guide object
To create a new instance of this class, use WireTool.createWireGuide() Created in NX9.0.0 |
WireGuideList |
Represents a list of objects.
|
WireTool |
Represents a Wire Tool
To create a new instance of this class, use NCGroupCollection.createWireTool(nxopen.cam.CAMObject) Created in NX9.0.0 |
WorkInstructionBuilder |
Represents the builder for Work Instruction
To create a new instance of this class, use CAMSetup.createWorkInstructionBuilder(nxopen.cam.CAMObject) Created in NX9.0.3 |
WorkInstructionOutputBuilder |
Represents the builder for Work Instruction Output.
|
ZAxisSmoothing | |
ZLevelMilling |
Represents a Z Level Milling Operation
To create or edit an instance of this class, use ZLevelMillingBuilder Created in NX7.5.0 |
ZLevelMillingBuilder |
Represents a ZLevelMilling Builder
To create a new instance of this class, use OperationCollection.createZlevelMillingBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
Copyright 2017 Siemens Product Lifecycle Management Software Inc. All Rights Reserved.