- F - Static variable in class nxopen.ame.InterruptionPointBuilder.Variant
-
- F - Static variable in class nxopen.cae.DurabilityDamageEvaluationBuilder.BwiWeldClassEnum
-
F
- F - Static variable in class nxopen.cae.DurabilityEventFatigueSettingsBuilder.BwiWeldClassEnum
-
F
- F - Static variable in class nxopen.cae.responsesimulation.DataLocation.Beam
-
- F - Static variable in class nxopen.cae.responsesimulation.ElementalFunctionEvalBeamLocation
-
- F - Static variable in class nxopen.cae.responsesimulation.NodalFunctionEvalBeamLocation
-
Stress Recovery point F on a beam cross section
- F - Static variable in class nxopen.cam.TurnToolBuilder.HolderStyles
-
F-Style
- F - Static variable in class nxopen.drawings.DrawingSheet.StandardSheetSize
-
28 X 40 inches
- f - Variable in class nxopen.routing.BendReportManager.Mil98Report
-
The radius of the bend.
- f07 - Variable in class nxopen.cae.aerostructures.author.ABB.StressF07Data
-
Secant yield stress F0.7
- f1() - Method in interface nxopen.annotations.DraftingSurfaceFinishBuilder
-
Returns the f1
License requirements: None.
- f1() - Method in interface nxopen.annotations.SurfaceFinishBuilder
-
Returns the f1
License requirements: None.
- F11 - Static variable in class nxopen.display.CameraBuilder.Aperture
-
f11
- F16 - Static variable in class nxopen.display.CameraBuilder.Aperture
-
f16
- f2() - Method in interface nxopen.annotations.DraftingSurfaceFinishBuilder
-
Returns the f2
License requirements: None.
- f2() - Method in interface nxopen.annotations.SurfaceFinishBuilder
-
Returns the f2
License requirements: None.
- F2 - Static variable in class nxopen.cae.DurabilityDamageEvaluationBuilder.BwiWeldClassEnum
-
F2
- F2 - Static variable in class nxopen.cae.DurabilityEventFatigueSettingsBuilder.BwiWeldClassEnum
-
F2
- F22 - Static variable in class nxopen.display.CameraBuilder.Aperture
-
f22
- F25 - Static variable in class nxopen.cam.TurnToolBuilder.ReliefAngleTypes
-
Relief angle type: F (25)
- F28 - Static variable in class nxopen.display.CameraBuilder.Aperture
-
f2.8
- F56 - Static variable in class nxopen.display.CameraBuilder.Aperture
-
f5.6
- F8 - Static variable in class nxopen.display.CameraBuilder.Aperture
-
f8
- FABRICATION - Static variable in class nxopen.routing.RouteManager.PartType
-
- fabricationNumbering() - Method in interface nxopen.annotations.BillOfMaterialBuilder
-
Returns the value that specifies the fabrication numbering.
- fabricationNumberingFlag() - Method in interface nxopen.preferences.RoutingPart
-
Returns the fabrication numbering for the Routing bill of material.
- fabricationObjects() - Method in interface nxopen.weld.InformationBuilder
-
Returns the list of weld fabrication objects to create the output.
- FACE - Static variable in class nxopen.ame.MountingInterfaceBuilder.FixingPolicy
-
- face() - Method in interface nxopen.annotations.BaseCenterline3dBuilder
-
Returns the face
License requirements: None.
- face() - Method in interface nxopen.annotations.SymmetricalCenterlineBuilder
-
Returns the face object of Symmetrical Centerline
License requirements: None.
- FACE - Static variable in class nxopen.bodydes.OnestepUnformBuilder.Object
-
face
- FACE - Static variable in class nxopen.cae.CaeGroupElementSubType
-
sub type is element face
- face() - Method in interface nxopen.cae.ElementExtrudeBuilder
-
Returns the face when extrude by project to surface
License requirements: None.
- face() - Method in interface nxopen.cae.ElementProjectBuilder
-
Returns the face on which projection will happen
License requirements: None.
- face - Variable in class nxopen.cae.MappedMeshBuilder.CornerData
-
- face() - Method in interface nxopen.cae.MeshPointOnFaceBuilder
-
Returns the node
License requirements: None.
- FACE - Static variable in class nxopen.cae.optimization.Geometry
-
Face
- FACE - Static variable in class nxopen.cae.PostGraphBuilder.EntityType
-
- FACE - Static variable in class nxopen.cae.SimLoadRecipeMapEntryTargetTypes.TargetTypes
-
Element face
- FACE - Static variable in class nxopen.cam.DrillSurfaceBuilder.SurfaceType
-
face
- FACE - Static variable in class nxopen.cam.SurfaceRegions.FeatureTypes
-
type to face
- FACE - Static variable in class nxopen.cam.TurnRoughFinishTestCut.SecondarySequenceTypes
-
Secondary Test Cut Sequence: Face
- face() - Method in interface nxopen.cam.TurnStock
-
Returns the face stock
License requirements: None.
- FACE - Static variable in class nxopen.die.FingerClearanceNotchBuilder.Types
-
Build from either a single face or a set of connected faces.
- FACE - Static variable in class nxopen.die.MachineReliefBuilder.TrimSheetTypes
-
Trimming surface is a face, or faces to be sewed together.
- Face - Interface in nxopen
-
Represents a face .
- face - Variable in class nxopen.FaceBossPocketFacesRule.DefiningData
-
Faces which creates this rule
- face - Variable in class nxopen.FaceMergedRibFacesRule.Data
-
Faces which creates this rule
- face - Variable in class nxopen.FaceMergedRibFacesRule.DefiningData
-
Faces which creates this rule
- face - Variable in class nxopen.FaceMergedRibFacesRule.SeedAndPointData
-
Faces which creates this rule
- face - Variable in class nxopen.FaceRibFacesRule.DefiningData
-
Faces which creates this rule
- face - Variable in class nxopen.FaceSlotFacesRule.DefiningData
-
Faces which creates this rule
- FACE - Static variable in class nxopen.features.AeroFlangeBuilder.GuideObjectTypes
-
Guide object is face
- FACE - Static variable in class nxopen.features.AeroRibBuilder.GuideObjectTypes
-
Guide object is face
- FACE - Static variable in class nxopen.features.AestheticFaceBlendBuilder.EndTrimObjectType
-
Override end trim object with face.
- FACE - Static variable in class nxopen.features.AestheticFaceBlendBuilder.StartTrimObjectType
-
Override start trim object with face.
- face() - Method in interface nxopen.features.ColorFaceBuilder
-
Returns the face to color.
- FACE - Static variable in class nxopen.features.DeleteFaceBuilder.SelectTypes
-
This stands for delete face type.
- FACE - Static variable in class nxopen.features.DraftBuilder.Type
-
Face Draft type
- face() - Method in interface nxopen.features.EditCrossSectionBuilder
-
Returns the face collector.
- FACE - Static variable in class nxopen.features.EmbossLimit.EndcapSourceOption
-
Indicates the geometries are selected surfaces not on the target.
- face() - Method in interface nxopen.features.EmbossProjection
-
Returns the projection face
License requirements: None.
- FACE - Static variable in class nxopen.features.EmbossProjection.ProjectionOption
-
Indicates the geometries are selected faces.
- face() - Method in interface nxopen.features.EnlargeBuilder
-
Returns the face
License requirements: nx_freeform_2 ("advanced freeform modeling")
.
- FACE - Static variable in class nxopen.features.ExtractFaceBuilder.ExtractType
-
type to extract face
- FACE - Static variable in class nxopen.features.FitCurveBuilder.TargetSourceTypes
-
Face
- FACE - Static variable in class nxopen.features.GeodesicIntersectBuilder.Type
-
Face.
- face() - Method in interface nxopen.features.IsoclineCurveBuilder
-
Returns the select face
License requirements: None.
- FACE - Static variable in class nxopen.features.MatchedReferenceBuilder.Types
-
single face or datum plane
- face() - Method in interface nxopen.features.OffsetRegionBuilder
-
Returns the faces to offset, don't use it until nx502
License requirements: None.
- FACE - Static variable in class nxopen.features.PartGeometryCopyBuilder.Type
-
Face
- face() - Method in interface nxopen.features.PartGeometryCopySelectBuilder
-
Returns the face
License requirements: None.
- face() - Method in interface nxopen.features.PatternFaceBuilder
-
Returns the faces to pattern, don't use it until nx502
License requirements: None.
- face() - Method in interface nxopen.features.RefitFaceBuilder
-
Returns the refitting face
License requirements: None.
- face() - Method in interface nxopen.features.ResizeFaceBuilder
-
Returns the faces to resize, don't use it until nx502
License requirements: None.
- FACE - Static variable in class nxopen.features.sheetmetal.BendTaperBuilder.WebTaperType
-
Face
- FACE - Static variable in class nxopen.features.ShelfBuilder.ReferenceType
-
- FACE - Static variable in class nxopen.features.shipdesign.ManufacturingStockBuilder.ObjectType
-
Face
- FACE - Static variable in class nxopen.features.StepBuilder.ReferenceBoundaryTypes
-
Select faces as reference boundary object
- FACE - Static variable in class nxopen.features.UnsewBuilder.UnsewTool
-
selected faces to unsew
- face() - Method in interface nxopen.features.VariableOffsetBuilder
-
Returns the face to be offset
License requirements: None.
- FACE - Static variable in class nxopen.features.vehicledesign.AllAroundVisionBuilder.WindowTypes
-
Face Object for Windows.
- FACE - Static variable in class nxopen.features.vehicledesign.CloseRangeCameraListItemBuilder.Types
-
Face type
- FACE - Static variable in class nxopen.geometricanalysis.GeometricProperties.Entity
-
Face
- Face() - Constructor for class nxopen.geometricanalysis.GeometricProperties.Face
-
- Face(double, double, Point3d, Vector3d, Vector3d, Vector3d, Point3d, Vector3d, Vector3d, Vector3d, double, double) - Constructor for class nxopen.geometricanalysis.GeometricProperties.Face
-
Constructor for the Face object.
- face - Variable in class nxopen.geometricanalysis.GeometricProperties.FacePropertiesData
-
Face Properties
- face() - Method in interface nxopen.geometricanalysis.SurfaceContinuityAnalysisBuilder
-
Returns the (second) faces.
- face() - Method in interface nxopen.geometricutilities.BlendSetbackBuilder
-
Returns the blend face collector.
- FACE - Static variable in class nxopen.geometricutilities.FacePlaneSelectionBuilder.TrimObjectType
-
face end cap
- face() - Method in interface nxopen.geometricutilities.LocalUntrimBuilder
-
Returns the tool object to split the target body.
- face() - Method in interface nxopen.geometricutilities.SnipIntoPatchesBuilder
-
Returns the face to snip into patches
License requirements: None.
- face() - Method in interface nxopen.tooling.EdgePatchBuilder
-
Returns the face to use to search for loops.
- FACE - Static variable in class nxopen.tooling.EdgePatchBuilder.SelectTypes
-
Face types
- FACE - Static variable in class nxopen.tooling.EjectorPostProcessingBuilder.TrimSufaceName
-
Select faces
- face() - Method in interface nxopen.tooling.ElectrodeComponentBuilder
-
Returns the face whose center will be the origin of the machine set csys.
- face() - Method in interface nxopen.tooling.ElectrodeInitializationBuilder
-
- FACE - Static variable in class nxopen.tooling.InsertAuxiliaryBuilder.UseFaceOrSketchToRevolve
-
- face() - Method in interface nxopen.tooling.ManufacturingGeometryBuilder
-
Returns the face to use as the region faces of the geometry groups.
- FACE - Static variable in class nxopen.tooling.ObjectAttributeManagementBuilder.FilterAccordingToAttributeType
-
- FACE - Static variable in class nxopen.tooling.ObjectAttributeManagementBuilder.FilterType
-
- FACE - Static variable in class nxopen.tooling.RemoveHolesBuilder.SelectionTypes
-
select face type
- FACE - Static variable in class nxopen.tooling.TrimSolidBuilder.Types
-
Region with body faces.
- FACE - Static variable in class nxopen.uf.UFConstants
-
- face - Variable in class nxopen.uf.UFModeling.AskSubdivFaceParmsData
-
- face - Variable in class nxopen.uf.UFModl.RefitFaceData
-
- face - Variable in class nxopen.uf.UFModlFeatures.AskEnlargeData
-
- face - Variable in class nxopen.uf.UFSo.DirrOnSurfData
-
- face - Variable in class nxopen.uf.UFSo.OffsetSurfCvtrData
-
- FACE - Static variable in class nxopen.visualreporting.VisualReport.ObjectTypeOption
-
The report objects are faces
- Face.FaceType - Class in nxopen
-
Solid face type.
- face1 - Variable in class nxopen.uf.UFModeling.AskThruFacesData
-
- face1 - Variable in class nxopen.uf.UFSf.ResultingFacePairs
-
- face1() - Method in interface nxopen.weld.PlugSlotBuilder
-
Returns the face1
License requirements: None.
- face1Tag - Variable in class nxopen.uf.UFModl.DevchkEeInfo
-
- face2 - Variable in class nxopen.uf.UFModeling.AskThruFacesData
-
- face2 - Variable in class nxopen.uf.UFSf.ResultingFacePairs
-
- face2() - Method in interface nxopen.weld.PlugSlotBuilder
-
Returns the face2
License requirements: None.
- FACE2LINES - Static variable in class nxopen.features.shipdesign.Cutout2Builder.CreationMethod
-
1 face and 2 lines, edges, or datums are used to place this cutout
- FACE2LINES - Static variable in class nxopen.features.shipdesign.ShipCutoutBuilder.CreationMethod
-
1 face and 2 lines, edges, or datums are used to place this cutout
- face2Tag - Variable in class nxopen.uf.UFModl.DevchkEeInfo
-
- FACE_ADJACENT - Static variable in class nxopen.SelectionIntentRule.RuleType
-
- FACE_ALL_BLEND - Static variable in class nxopen.SelectionIntentRule.RuleType
-
- FACE_ANALYSIS - Static variable in class nxopen.preferences.ViewVisualizationVisual.DisplayModeType
-
Deprecated.
Display faces using the color analysis data
- FACE_ANALYSIS - Static variable in class nxopen.preferences.ViewVisualizationVisual.RenderingStyle
-
- FACE_ANALYSIS - Static variable in class nxopen.View.RenderingStyleType
-
- FACE_ANALYSIS_REFLECTION_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- FACE_ANALYSIS_REFLECTION_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- FACE_ANALYSIS_STYLE - Static variable in class nxopen.uf.UFView.RenderingStyle
-
- FACE_AND_ADJACENT_FACES - Static variable in class nxopen.SelectionIntentRule.RuleType
-
- FACE_AND_EDGE - Static variable in class nxopen.features.shipdesign.EndCutBuilder.SelectionTypes
-
If this Selection Type is set, then a single pair of a Face (Placement Face) and an edge(Placement Edge) needs to be specified.
- FACE_AND_NORMAL_VECTOR - Static variable in class nxopen.cae.FluidDomainBuilder.IntExtType
-
The interior specified by providing a face and a normal.
- FACE_AREA_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
-
Face area property
- FACE_AXIS_POINT - Static variable in class nxopen.PlaneTypes.MethodType
-
Through Face Axis at Point
- FACE_BODY - Static variable in class nxopen.SelectionIntentRule.RuleType
-
- FACE_BOSS_POCKET - Static variable in class nxopen.SelectionIntentRule.RuleType
-
- FACE_CENTRAL_ANGLE - Static variable in class nxopen.die.QuickBinderBuilder.EditTypes
-
Change the central angle of a conical/cylindrical face.
- FACE_CHAIN - Static variable in class nxopen.features.ExtractFaceBuilder.FaceOptionType
-
selection intent option
- FACE_CHAIN - Static variable in class nxopen.features.sheetmetal.BendTaperBuilder.WebTaperType
-
Face Chain
- FACE_COLLECTOR - Static variable in class nxopen.features.MatchedReferenceBuilder.Types
-
face collector
- FACE_COLORS - Static variable in class nxopen.cam.FeatureTeaching.RuleMatchOptionType
-
- FACE_CONNECTED_BLEND - Static variable in class nxopen.SelectionIntentRule.RuleType
-
- FACE_DENSITY_SIZE - Static variable in class nxopen.cae.MeshControlBuilder.Types
-
- FACE_DUMB - Static variable in class nxopen.SelectionIntentRule.RuleType
-
- FACE_EDGE - Static variable in class nxopen.features.shipdesign.ShipEndCutBuilder.CreationMethod
-
1 face and 1 edge are used to place this endcut
- FACE_EDGE_BLEND - Static variable in class nxopen.features.DeleteFaceBuilder.SelectTypes
-
This stands for delete notch blend type.
- FACE_EXTENSION_CIRC - Static variable in class nxopen.uf.UFModl.FaceExtension
-
- FACE_EXTENSION_CURV - Static variable in class nxopen.uf.UFModl.FaceExtension
-
- FACE_EXTENSION_LINEAR - Static variable in class nxopen.uf.UFModl.FaceExtension
-
- FACE_EXTENSION_NATURAL - Static variable in class nxopen.uf.UFModl.FaceExtension
-
- FACE_EXTENSION_NONE - Static variable in class nxopen.uf.UFModl.FaceExtension
-
- FACE_FACE_IMPRINT - Static variable in class nxopen.cae.ImprintBuilder.ImprintTypes
-
Face-Face Imprint
- FACE_FEATURE - Static variable in class nxopen.SelectionIntentRule.RuleType
-
- FACE_FEM - Static variable in class nxopen.cae.SimLoadRecipeMapEntryTargetTypes.TargetTypes
-
Element faces in a fem model.
- FACE_GROUP - Static variable in class nxopen.cae.SimLoadRecipeMapEntryTargetTypes.TargetTypes
-
Element faces in a group.
- FACE_GROUP - Static variable in class nxopen.geometricutilities.ReduceSurfaceRadiusBuilder.ReducedFaceTypeSpecification
-
Preview all items in face group list when using "Select Faces by Radius" to select input objects.
- FACE_LINK - Static variable in class nxopen.features.WaveLinkBuilder.Types
-
- FACE_MERGED_RIB - Static variable in class nxopen.SelectionIntentRule.RuleType
-
- FACE_MESH - Static variable in class nxopen.cae.SimLoadRecipeMapEntryTargetTypes.TargetTypes
-
Element faces in a mesh.
- FACE_MIN_RADIUS_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
-
Face minimum radius property
- FACE_NORMAL - Static variable in class nxopen.features.shipdesign.EdgeReinforcementBuilder.OrientationMethods
-
- FACE_NORMAL - Static variable in class nxopen.features.shipdesign.ProfileBuilder.OrientationOption
-
- FACE_NORMAL - Static variable in class nxopen.features.shipdesign.StiffenerBuilder.MountingMethods
-
Offset stiffener along placement face normal
- FACE_NORMAL - Static variable in class nxopen.features.shipdesign.StiffenerBuilder.OrientationMethod
-
Align stiffener with face normal
- FACE_NORMAL - Static variable in class nxopen.features.shipdesign.StiffenerSystemBuilder.MountingMethods
-
Offset stiffener along placement face normal
- FACE_NORMAL - Static variable in class nxopen.features.shipdesign.StiffenerSystemBuilder.OrientationMethods
-
- FACE_NORMAL - Static variable in class nxopen.features.SilhouetteFlangeBuilder.ReferenceDirectionOptions
-
Create flange along face normal
- FACE_NORMAL - Static variable in class nxopen.geometricutilities.ProjectionOptions.DirectionType
-
Face Normal
- FACE_NORMAL - Static variable in class nxopen.weld.WeldProjectionMethod
-
creates a sphere
- FACE_NORMALS - Static variable in class nxopen.uf.UFModl.SmholeDirectionType
-
- FACE_NOT_RECTANGULAR - Static variable in class nxopen.uf.UFConstants
-
- FACE_OFFSET - Static variable in class nxopen.features.LabelChamferBuilder.ChamferType
-
- FACE_OR_PLANE - Static variable in class nxopen.features.DeleteFaceBuilder.CapOptionValues
-
face or plane.
- FACE_OR_PLANE - Static variable in class nxopen.geometricutilities.BooleanToolBuilder.BooleanToolType
-
Tool consists of sets of faces or datum planes
- FACE_PARALLELISM - Static variable in class nxopen.weld.WeldAdvisorCheckerType
-
face parallelism
- FACE_PERCENTAGE - Static variable in class nxopen.features.PointSetBuilder.FacePointsType
-
A point will be created at given face percentages.
- FACE_PERIMETER_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
-
Face perimeter property
- FACE_PLANARITY - Static variable in class nxopen.weld.WeldAdvisorCheckerType
-
face planarity
- FACE_PLANE - Static variable in class nxopen.cae.responsesimulation.StrainGageOrientationPlane
-
- FACE_PLANE - Static variable in class nxopen.features.shipdesign.PlateBoundaryOptionBuilder.BoundaryTypes
-
- FACE_PLANE - Static variable in class nxopen.features.shipdesign.SplitStandardPartBuilder.ToolTypes
-
Face or plane object.
- FACE_PMIDATUM_FEATURE_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
-
Face PMI datum feature property
- FACE_PMIDATUM_TARGET_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
-
Face PMI datum target property
- FACE_PMIFCFCHAR_FORM_TOL_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
-
Face PMI FCF form characteristics property
- FACE_PMIFCFCHAR_LOCATION_TOL_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
-
Face PMI FCF location characteristics property
- FACE_PMIFCFCHAR_ORIENTATION_TOL_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
-
Face PMI FCF orientation characteristics property
- FACE_PMIFCFCHAR_PROFILE_TOL_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
-
Face PMI FCF profile characteristics property
- FACE_PMIFCFCHAR_RUNOUT_TOL_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
-
Face PMI FCF run out characteristics property
- FACE_PMIFCFCHARACTERISTICS_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
-
Face PMI FCF characteristics property
- FACE_PMIFCFPROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
-
Face PMI FCF property
- FACE_POINTS - Static variable in class nxopen.features.PointSetBuilder.Types
-
Create points on face
- FACE_PROPERTIES - Static variable in class nxopen.GenericMeasure.Type
-
- FACE_PROPERTIES - Static variable in class nxopen.tooling.MWMoldedPartValidationBuilder.CheckScope
-
face properties
- FACE_RADIUS - Static variable in class nxopen.die.QuickBinderBuilder.EditTypes
-
Change the face radius of a conical/cylindrical face.
- FACE_REGION - Static variable in class nxopen.SelectionIntentRule.RuleType
-
- FACE_REGION_BOUNDARY - Static variable in class nxopen.SelectionIntentRule.RuleType
-
- FACE_REVERSE_CONVEXITY - Static variable in class nxopen.die.QuickBinderBuilder.EditTypes
-
Reverse the convexity of a conical/cylindrical face.
- FACE_RIB - Static variable in class nxopen.SelectionIntentRule.RuleType
-
- FACE_SELECTION_RECIPE - Static variable in class nxopen.cae.SimLoadRecipeMapEntryTargetTypes.TargetTypes
-
- FACE_SELF_INTERSECTION - Static variable in class nxopen.geometricanalysis.ExamineGeometry.Check
-
FaceSelfIntersection
- FACE_SET1 - Static variable in class nxopen.geometricanalysis.SurfaceIntersectionBuilder.NormalTypes
-
linear needle
- FACE_SET2 - Static variable in class nxopen.geometricanalysis.SurfaceIntersectionBuilder.NormalTypes
-
logarithmic needle
- FACE_SLOT - Static variable in class nxopen.SelectionIntentRule.RuleType
-
- FACE_SMOOTHNESS - Static variable in class nxopen.geometricanalysis.ExamineGeometry.Check
-
FaceSmoothness
- FACE_SPIKES_CUTS - Static variable in class nxopen.geometricanalysis.ExamineGeometry.Check
-
FaceSpikesCuts
- FACE_TANGENT - Static variable in class nxopen.SelectionIntentRule.RuleType
-
- FACE_TO_FACE - Static variable in class nxopen.geometricanalysis.DeviationChecking.Types
-
check face to face
deviation
- FACE_TOPO - Static variable in class nxopen.uf.UFBrep.TopoType
-
- FACE_TYPE_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
-
Face type property
- FACE_WARP_COEFFICIENT - Static variable in class nxopen.cae.modelcheck.TestValueTypes.TestType
-
- FaceAdjacentRule - Interface in nxopen
-
- FaceAllBlendRule - Interface in nxopen
-
- FaceAllBlendRule.DefiningData - Class in nxopen
-
- faceAllFacesColor() - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
Returns the color for applying to all faces on the Face Tab page.
- faceAnalysis() - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
Returns the face analysis
License requirements: None.
- FaceAnalysis - Interface in nxopen.geometricanalysis
-
- faceAnalysis() - Method in interface nxopen.preferences.PartObject
-
Returns the face analysis flag for Solid and Sheets
License requirements: None.
- FaceAnalysisDataRangeBuilder - Interface in nxopen.geometricanalysis
-
Represents data range functions used by Face Analysis.
- FaceAnalysisDisplayBuilder - Interface in nxopen.geometricanalysis
-
Represents a set of display settings used by Face Analysis.
- FaceAnalysisDisplayBuilder.ColorLegendOptions - Class in nxopen.geometricanalysis
-
Represents color legend type in display.
- FaceAnalysisDisplayBuilder.ColorsOptions - Class in nxopen.geometricanalysis
-
The option indicating number of colors to be used for display.
- faceAnalysisMode() - Method in interface nxopen.DisplayModification
-
Returns the face analysis mode flag.
- FaceAnalysisNormalsBuilder - Interface in nxopen.geometricanalysis
-
Represents reverse normal functions used by Face Analysis.
- faceAnalysisViewsType() - Method in interface nxopen.display.SelPref
-
Returns the face analysis views type
License requirements: None.
- FaceAndAdjacentFacesRule - Interface in nxopen
-
- FaceAnnotationBuilder - Interface in nxopen.formboard
-
Builder for Face Annotation functionality used in formboard.
- FaceAnnotationBuilder.DrwDestination - Class in nxopen.formboard
-
Enum which defines where the geometry is to be placed.
- FaceAnnotationBuilder.Types - Class in nxopen.formboard
-
Enum which defines the type to import CGM/Pattern file
- faceAskAdjacentFaces(Tag) - Method in interface nxopen.uf.UFSf
-
- FaceAskAdjacentFacesData() - Constructor for class nxopen.uf.UFSf.FaceAskAdjacentFacesData
-
- faceAskArea(Tag) - Method in interface nxopen.uf.UFSf
-
- faceAskBody(Tag) - Method in interface nxopen.uf.UFSf
-
- faceAskBoundingBox(Tag) - Method in interface nxopen.uf.UFSf
-
- faceAskEdges(Tag) - Method in interface nxopen.uf.UFSf
-
- FaceAskEdgesData() - Constructor for class nxopen.uf.UFSf.FaceAskEdgesData
-
- FaceAttributeBuilder - Interface in nxopen.tooling
-
Represents a builder to be used to create face attribute.
- FaceBlend - Interface in nxopen.features
-
Represents a Face Blend feature.
- FaceBlendBuilder - Interface in nxopen.features
-
Represents a face blend builder.
- FaceBlendBuilder.CrossSectionOption - Class in nxopen.features
-
This enum represents the Cross section types
- FaceBlendBuilder.DefiningType - Class in nxopen.features
-
This enum represents the Face Blend defining type, it is added in NX75 for new three face blend
- FaceBlendBuilder.LimitPlanesData - Class in nxopen.features
-
- FaceBlendBuilder.OverflowMethod - Class in nxopen.features
-
This enum represents the overflow options
- FaceBlendBuilder.RhoMethod - Class in nxopen.features
-
This enum represents the rho types
- FaceBlendBuilder.TrimmingMethod - Class in nxopen.features
-
This enum represents the Trimming options for Face Blend
- FaceBlendBuilder.Type - Class in nxopen.features
-
This enum represents the Face Blend types
- FaceBlendBuilder.WidthMethod - Class in nxopen.features
-
This enum represents the Face Blend width method, it is added in NX10 for two face blend
- faceBlendDefineType() - Method in interface nxopen.features.FaceBlendBuilder
-
Returns the face blend defining type get
License requirements: None.
- FaceBodyRule - Interface in nxopen
-
- FaceBossPocketFacesRule - Interface in nxopen
-
- FaceBossPocketFacesRule.DefiningData - Class in nxopen
-
- faceBoundary() - Method in interface nxopen.geometricutilities.PatternFill
-
Returns the face boundary
License requirements: None.
- faceChain() - Method in interface nxopen.features.ExtractFaceBuilder
-
Returns the face chain containing the faces to extract
License requirements: None.
- faceChain1() - Method in interface nxopen.features.AestheticFaceBlendBuilder
-
Returns the face chain1
License requirements: None.
- faceChain2() - Method in interface nxopen.features.AestheticFaceBlendBuilder
-
Returns the face chain2
License requirements: None.
- faceChangeOption() - Method in interface nxopen.geometricutilities.FaceChangeOverflowBehavior
-
Returns the face change option.
- faceChangeOverflowBehavior() - Method in interface nxopen.features.AdmMoveFaceBuilder
-
Returns the face change overflow behavior.
- faceChangeOverflowBehavior() - Method in interface nxopen.features.AdmOffsetRegionBuilder
-
Returns the face change overflow behavior.
- faceChangeOverflowBehavior() - Method in interface nxopen.features.CoaxialBuilder
-
Returns the face change overflow behavior.
- faceChangeOverflowBehavior() - Method in interface nxopen.features.CoplanarBuilder
-
Returns the face change overflow behavior.
- faceChangeOverflowBehavior() - Method in interface nxopen.features.DimensionBuilder
-
Returns the face change overflow behavior.
- faceChangeOverflowBehavior() - Method in interface nxopen.features.EditCrossSectionBuilder
-
Returns the face change overflow behavior.
- faceChangeOverflowBehavior() - Method in interface nxopen.features.MakeOffsetBuilder
-
Returns the face change overflow behavior.
- faceChangeOverflowBehavior() - Method in interface nxopen.features.ParallelBuilder
-
Returns the face change overflow behavior.
- faceChangeOverflowBehavior() - Method in interface nxopen.features.PerpendicularBuilder
-
Returns the face change overflow behavior.
- faceChangeOverflowBehavior() - Method in interface nxopen.features.ReplaceFaceBuilder
-
Returns the face change overflow behavior.
- faceChangeOverflowBehavior() - Method in interface nxopen.features.TangentBuilder
-
Returns the face change overflow behavior.
- FaceChangeOverflowBehavior - Interface in nxopen.geometricutilities
-
Represents a
FaceChangeOverflowBehavior
It provides several face change options for controlling behavior when a change face overflows an incident face.
- FaceChangeOverflowBehavior.Option - Class in nxopen.geometricutilities
-
face change option.
- FaceCharacteristicsBuilder - Interface in nxopen.features.shipdesign.generalarrangement
-
Represents a builder to be used to add face characteristics attributes and color to specified faces.
- FaceClearanceCheckBuilder - Interface in nxopen.cae.modelcheck
-
- faceCnt - Variable in class nxopen.uf.UFCurve.AskIsoclineData
-
- FaceCollector - Interface in nxopen.blockstyler
-
Represents a Face Collector .
- faceCollector() - Method in interface nxopen.facet.MergeFacetFacesBuilder
-
Returns the face collector
License requirements: None.
- faceCollector() - Method in interface nxopen.features.AOCSBuilder
-
Returns the face collector.
- faceCollector() - Method in interface nxopen.features.DeleteFaceBuilder
-
Returns the face collector holding the faces to delete, don't use it until nx502
License requirements: None.
- faceCollector() - Method in interface nxopen.features.FaceRecognitionBuilder
-
Returns the face collector
License requirements: None.
- faceCollector() - Method in interface nxopen.features.OffsetFaceBuilder
-
Returns the face collector
License requirements: None.
- faceCollector() - Method in interface nxopen.features.PatternFaceFeatureBuilder
-
Returns the face collector.
- faceCollector() - Method in interface nxopen.features.SectionInertiaAnalysisBuilder
-
Returns the face collector
License requirements: None.
- faceCollector() - Method in interface nxopen.features.sheetmetal.RebendBuilder
-
Returns the unbent faces to rebend
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- faceCollector() - Method in interface nxopen.features.sheetmetal.UnbendBuilder
-
Returns the bend faces
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- faceCollector() - Method in interface nxopen.features.ThickenBuilder
-
Returns the faces to thicken.
- faceCollector() - Method in interface nxopen.features.UnsewBuilder
-
Returns the face collector
License requirements: None.
- faceCollector() - Method in interface nxopen.geometricutilities.FaceSetData
-
Returns the face set collector
License requirements: None.
- faceCollector() - Method in interface nxopen.geometricutilities.FaceSetOffset
-
Returns the face collector
License requirements: None.
- faceCollector() - Method in interface nxopen.MeasureFaceBuilder
-
Returns the face collector
License requirements: None.
- faceCollector() - Method in interface nxopen.modldirect.SelectBlend
-
Returns the blend faces collector.
- faceCollector() - Method in interface nxopen.SketchIntersectionCurveBuilder
-
Returns the faces to intersect
License requirements: None.
- faceColor - Variable in class nxopen.cae.Post.EdgeFace
-
- faceColor - Variable in class nxopen.cae.Post.PrimaryEdgeFace
-
- faceColor() - Method in interface nxopen.tooling.FaceColorManagementBuilder
-
Returns the face color
License requirements: None.
- faceColor() - Method in interface nxopen.tooling.MWDefineRegionsBuilder
-
Returns the face color for the selected region faces
License requirements: None.
- faceColorManagement() - Method in interface nxopen.tooling.ToolingManager
-
Returns the FaceColorManagementCollection instance belonging to this part .
- FaceColorManagementBuilder - Interface in nxopen.tooling
-
- FaceColorManagementBuilder.HoleTypeEnumValue - Class in nxopen.tooling
-
the hole type enumeration
- FaceColorManagementCollection - Interface in nxopen.tooling
-
- FaceConnectedBlendRule - Interface in nxopen
-
- FaceConnectedBlendRule.DefiningData - Class in nxopen
-
- FaceConstraintCollectorsData() - Constructor for class nxopen.features.MeshSurfaceBuilder.FaceConstraintCollectorsData
-
- faceConstraintDirection() - Method in interface nxopen.features.MeshSurfaceBuilder
-
Returns
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- faceCount - Variable in class nxopen.uf.UFSubdiv.Isocline
-
- faceCrossoverFacesColor() - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
Returns the color for applying to the crossover faces on the Face Tab page.
- FaceCurvatureAnalysis - Interface in nxopen.geometricanalysis
-
Represents a Face Curvature Analysis builder
To create or edit an instance of this class, use
FaceCurvatureAnalysisBuilder
Created in NX8.0.0
- FaceCurvatureAnalysisBuilder - Interface in nxopen.geometricanalysis
-
- FaceCurvatureAnalysisBuilder.CurvatureTypes - Class in nxopen.geometricanalysis
-
Represents the face curvature types.
- FaceCurvatureAnalysisBuilder.DirectionTypes - Class in nxopen.geometricanalysis
-
Methods of specifiying the direction for normal and section curvatures.
- FaceCurvatureAnalysisBuilder.DisplayTypes - Class in nxopen.geometricanalysis
-
Represents the display types.
- FaceCurvatureAnalysisBuilder.ScaleTypes - Class in nxopen.geometricanalysis
-
Represents the scaling types for curvature values.
- faceCurveDirectionAdjustment() - Method in interface nxopen.assemblies.RelinkerBuilder
-
Returns the option to adjust face or curve direction.
- faceData - Variable in class nxopen.uf.UFCurve.OcfData
-
- FaceDensity - Interface in nxopen.cae
-
Represents a CAE face density
.
- faceDensitySize() - Method in interface nxopen.cae.MeshControlDisplayOptionsBuilder
-
Returns the face density size
License requirements: None.
- faceDirection() - Method in interface nxopen.features.PromotionBuilder
-
Returns the face direction for a sheet body
License requirements: None.
- faceDirectionOption() - Method in interface nxopen.geometricutilities.BridgeCurveConnectivity
-
Returns the face direction option
License requirements: None.
- faceDisplay() - Method in interface nxopen.drawings.ViewWorkflowBuilder
-
Returns the face display provides options in an extracted edge view that are available for selection
License requirements: None.
- faceDraftAngleLimit() - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
Returns the draft angle limit on the Face Tab page.
- FaceDumbRule - Interface in nxopen
-
Represents a
SelectionIntentRule
that collects faces without any intent i.e. as if collected with Single Face rule.
- faceEdgeBlendPreference() - Method in interface nxopen.features.DeleteFaceBuilder
-
Returns the preference option indicating wether to delete undetermined blend chain as notch chain or as cliff chain
License requirements: None.
- faceEdgesColor - Variable in class nxopen.uf.UFDisp.SystemParams
-
- faceEvaluateParamLocation(Tag, double[]) - Method in interface nxopen.uf.UFSf
-
- faceExtension - Variable in class nxopen.uf.UFModl.Faces
-
- FaceFaceImprintBuilder - Interface in nxopen.cae
-
- FaceFacetData() - Constructor for class nxopen.uf.UFDisp.FaceFacetData
-
- FaceFacetData(Tag, boolean, int, int, int, int, double, double, double) - Constructor for class nxopen.uf.UFDisp.FaceFacetData
-
- faceFacetData - Variable in class nxopen.uf.UFDisp.GetFacetData
-
- FaceFacetsRule - Interface in nxopen
-
- FaceFeatureRule - Interface in nxopen
-
- faceFillGapDistance() - Method in interface nxopen.weld.FilletBuilder
-
Returns the distance the fillet will span when there are gaps in the sheet definition.
- faceFinder() - Method in interface nxopen.features.StudioXformBuilderEx
-
Returns the face finder
License requirements: None.
- faceForRamp() - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
Returns the sweep face for editing ramp.
- FaceFromBoundaryBuilder - Interface in nxopen.cae
-
- faceGapDistance() - Method in interface nxopen.weld.AutoPointBuilder
-
Returns the face gap distance.
- faceGroupList() - Method in interface nxopen.geometricutilities.ReduceSurfaceRadiusBuilder
-
Returns the list containing the face chains as input objects used to do reduction.
- faceHandle - Variable in class nxopen.uf.UFWeld.SpotFaceLoc
-
- faceHighlightSelectedFaces() - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
Returns the option for highlighting the selected faces on the Face Tab page.
- faceId() - Method in interface nxopen.cae.PostSelectionEntity
-
Returns the face id selected
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- faceIds - Variable in class nxopen.cae.FEElemFace.ElementsAndFaceIdsData
-
- faceIndexToEdit() - Method in interface nxopen.die.QuickBinderBuilder
-
Returns the index of the face to edit.
- faceInferMethod() - Method in interface nxopen.weld.WeldBeadBuilder
-
Returns the method to use when inferring faces to create the bead guide curve path.
- faceIntegralOption() - Method in interface nxopen.cae.ResultProbeBuilder
-
Returns the face integral option
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- faceIntegralOptionValue() - Method in interface nxopen.cae.PostGraphBuilder
-
Returns the weighted average or integral option on selecting Face
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- faceInterferenceType() - Method in interface nxopen.geometricanalysis.SimpleInterference
-
Returns the FaceInterferenceType.
- faceLinkTag - Variable in class nxopen.uf.UFMotion.PointOnSurfaceData
-
- faceList() - Method in interface nxopen.tooling.ElectrodeInitializationBuilder
-
Returns the face list whose center will be the origin of the machine set csys.
- faceList - Variable in class nxopen.uf.UFMfm.AskListOfFacesData
-
- faceLoc - Variable in class nxopen.uf.UFWeld.SpotData
-
- faceLoc - Variable in class nxopen.uf.UFWeld.SpotInfo
-
- faceMap - Variable in class nxopen.uf.UFGdt.ModlData
-
- FaceMergedRibFacesRule - Interface in nxopen
-
- FaceMergedRibFacesRule.Data - Class in nxopen
-
- FaceMergedRibFacesRule.DefiningData - Class in nxopen
-
- FaceMergedRibFacesRule.SeedAndPointData - Class in nxopen
-
- FaceMilling - Interface in nxopen.cam
-
Represents a Face Milling Operation
To create or edit an instance of this class, use
FaceMillingBuilder
Created in NX7.5.0
- FaceMillingBuilder - Interface in nxopen.cam
-
- faceNegativeFacesColor1() - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
Returns the color for applying to the negative small radius faces on the Face Tab page.
- faceNegativeFacesColor2() - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
Returns the color for applying to the negative faces on the Face Tab page.
- faceNonSelectedFacesTranslucency() - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
Returns the translucency for the non-selected faces on the Face Tab page.
- faceNormal() - Method in interface nxopen.cae.FluidDomainBuilder
-
Returns the face normal
License requirements: None.
- faceNormal - Variable in class nxopen.uf.UFWeld.SpotFaceLoc
-
- faceNormal - Variable in class nxopen.uf.UFWeld.SpotFaceLocation
-
- facenormaloppositefin - Variable in class nxopen.weld.WeldBeadPathBuilder.UpdatePathData
-
Normal if path is opposite direction of parasolid fin.
- facenormalwithfin - Variable in class nxopen.weld.WeldBeadPathBuilder.UpdatePathData
-
Normal if path is in direction of parasolid fin
- faceObjects() - Method in interface nxopen.MeasureFaceBuilder
-
Returns the face objects
License requirements: None.
- faceOfFirstEdge() - Method in interface nxopen.geometricanalysis.DeviationChecking
-
- faceOffset() - Method in interface nxopen.features.shipdesign.StiffenerBuilder
-
Returns the face offset expression
License requirements: None.
- faceOffsetExpression() - Method in interface nxopen.features.shipdesign.ProfileBuilder
-
Returns the face offset expression
License requirements: None.
- faceOffsetVector() - Method in interface nxopen.features.shipdesign.ProfileBuilder
-
Returns the face offset vector
License requirements: None.
- faceOfSecondEdge() - Method in interface nxopen.geometricanalysis.DeviationChecking
-
- faceOption() - Method in interface nxopen.features.ExtractFaceBuilder
-
Returns the face option type
License requirements: None.
- facepairAskMidsrfFrec(Tag) - Method in interface nxopen.uf.UFSf
-
- FacePairData() - Constructor for class nxopen.features.sheetmetal.ClosedCornerBuilder.FacePairData
-
- FacePairData() - Constructor for class nxopen.features.sheetmetal.EditCornerBuilder.FacePairData
-
- FacePairData() - Constructor for class nxopen.features.sheetmetal.ThreeBendCornerBuilder.FacePairData
-
- facePairType - Variable in class nxopen.uf.UFModeling.AskFacepairParmsData
-
- facePercentageList() - Method in interface nxopen.features.PointSetBuilder
-
Returns the face percentage list.
- facePlaneBoundary() - Method in interface nxopen.features.shipdesign.PlateBuilder
-
Returns the face, plane boundary, which defines a list of trimming objects with offset values.
- FacePlaneSelectionBuilder - Interface in nxopen.geometricutilities
-
- FacePlaneSelectionBuilder.TrimObjectType - Class in nxopen.geometricutilities
-
Specifies the object type for blend endcap objects.
- FacePlaneSelectionBuilderCollection - Interface in nxopen.geometricutilities
-
This class contains the factory methods for creating an FacePlaneSelectionBuilder.
- facePlaneSelectionBuilderData() - Method in interface nxopen.Part
-
Returns the FacePlaneSelectionBuilderCollection instance belonging to this part .
- facePlaneTool() - Method in interface nxopen.geometricutilities.BooleanToolBuilder
-
Returns the FacePlaneTool Builder.
- FacePlaneToolBuilder - Interface in nxopen.geometricutilities
-
a sub-component of BooleanToolBuilder.
- facePnt - Variable in class nxopen.uf.UFModeling.AskFaceParm2Data
-
- facePnt - Variable in class nxopen.uf.UFModeling.AskFaceParmData
-
- facePointsBy() - Method in interface nxopen.features.PointSetBuilder
-
Returns the face points definition setting.
- facePositiveFacesColor1() - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
Returns the color for applying to the positive faces on the Face Tab page.
- facePositiveFacesColor2() - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
Returns the color for applying to the positive small radius faces on the Face Tab page.
- FacePropertiesData() - Constructor for class nxopen.geometricanalysis.GeometricProperties.FacePropertiesData
-
- FaceRecognitionBuilder - Interface in nxopen.features
-
Represents a collection of faces and their relationships to other faces in the model .
- faceRecognizer() - Method in interface nxopen.features.MatchEdgeBuilder
-
Returns the face recognition
License requirements: None.
- faceReflectivityScale() - Method in interface nxopen.geometricanalysis.ReflectionAnalysisBuilder
-
Returns the face reflectivity scale from 0 to 100.
- FaceRegionBoundaryRule - Interface in nxopen
-
- FaceRegionBoundaryRule.Data - Class in nxopen
-
- FaceRegionRule - Interface in nxopen
-
- faceReverse() - Method in interface nxopen.features.vehicledesign.CloseRangeCameraListItemBuilder
-
Returns the indication if the selected camera face surface should be reversed.
- faceReverseDirection() - Method in interface nxopen.features.ExtractFaceBuilder
-
Returns the option specifying whether to reverse the face normals for the extracted faces.
- faceReverseDirection() - Method in interface nxopen.features.shipdesign.StiffenerBuilder
-
Returns the face reverse direction flag
License requirements: None.
- faceReverseDirection() - Method in interface nxopen.tooling.ReplaceSolidBuilder
-
Returns the face reverse direction status.
- FaceRibFacesRule - Interface in nxopen
-
- FaceRibFacesRule.DefiningData - Class in nxopen
-
- faceRules() - Method in interface nxopen.blockstyler.FaceCollector
-
Returns the FaceRules
License requirements: None.
- FACES - Static variable in class nxopen.blockstyler.SelectObject.FilterType
-
Filter to select all face types
- FACES - Static variable in class nxopen.cae.ResultProbeBuilder.SelectionType
-
- faces() - Method in interface nxopen.cam.MachiningFeature
-
Returns the face selection
License requirements: None.
- FACES - Static variable in class nxopen.cam.Preferences.AuxiliaryFloorColorSelectionTypes
-
Deprecated.
Faces
- FACES - Static variable in class nxopen.cam.Preferences.BlankSelectionTypes
-
Deprecated.
Faces
- FACES - Static variable in class nxopen.cam.Preferences.CheckSelectionTypes
-
Deprecated.
Faces
- FACES - Static variable in class nxopen.cam.Preferences.CutAreaSelectionTypes
-
Deprecated.
Faces
- FACES - Static variable in class nxopen.cam.Preferences.PartSelectionTypes
-
Deprecated.
Faces
- FACES - Static variable in class nxopen.cam.Preferences.SelectionTypes
-
faces
- FACES - Static variable in class nxopen.cam.Preferences.WallSelectionTypes
-
Deprecated.
Faces
- faces() - Method in interface nxopen.cam.SurfaceRegions
-
Returns the faces
License requirements: None.
- faces() - Method in interface nxopen.die.QuickBinderBuilder
-
Returns the product faces used to perform the initial approximation.
- faces() - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
Returns the collection of formed faces
License requirements: None.
- faces() - Method in interface nxopen.features.ConcaveFacesBuilder
-
Returns the collection of all the possible faces.
- faces() - Method in interface nxopen.features.CurveOnSurfaceBuilder
-
Returns the face collector
License requirements: solid_modeling ("SOLIDS MODELING")
.
- FACES - Static variable in class nxopen.features.DraftBodyBuilder.Types
-
Faces to Draft
- faces() - Method in interface nxopen.features.LawExtensionBuilder
-
Returns the faces.
- FACES - Static variable in class nxopen.features.LawExtensionBuilder.Types
-
Reference faces
- faces() - Method in interface nxopen.features.LawExtensionBuilderEx
-
Returns the faces.
- FACES - Static variable in class nxopen.features.LawExtensionBuilderEx.Types
-
Reference faces
- faces() - Method in interface nxopen.features.PatchOpeningsBuilder
-
Returns the faces to form patching boundary.
- faces() - Method in interface nxopen.features.ResizeChamferBuilder
-
Returns the faces
License requirements: None.
- faces() - Method in interface nxopen.features.sheetmetal.AdvancedFlangeBuilder
-
Returns the reference face for advanced flange
License requirements: None.
- faces() - Method in interface nxopen.features.sheetmetal.JoggleInputListItemBuilder
-
Returns the faces
License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- FACES - Static variable in class nxopen.features.shipdesign.HullBuilder.Types
-
Mold face is being defined by selected faces.
- faces - Variable in class nxopen.features.shipdesign.StiffenerBuilder.CreatePathData
-
The faces/datums defining the placement of the profile that is being oriented.
- faces() - Method in interface nxopen.features.WrapBuilder
-
Returns the faces that the curves are being unwrapped from or wrapped to.
- FACES - Static variable in class nxopen.fields.SpatialMap.SubtypeMappingEnum
-
Map 3D degenerate data to faces
- faces() - Method in interface nxopen.geometricanalysis.DistanceAnalysisBuilder
-
Returns the face to apply distance analysis.
- faces() - Method in interface nxopen.geometricanalysis.HighlightLinesAnalysisBuilder
-
Returns the face list
License requirements: None.
- faces() - Method in interface nxopen.geometricanalysis.RadiusAnalysisBuilder
-
Returns the face to apply radius analysis.
- faces() - Method in interface nxopen.geometricanalysis.ReflectionAnalysisBuilder
-
Returns the face to apply reflection analysis.
- faces() - Method in interface nxopen.geometricanalysis.SlopeAnalysisBuilder
-
Returns the face to apply slope analysis.
- faces() - Method in interface nxopen.geometricutilities.OrientationMethodBuilder
-
Returns the faces that provide normal direction for alignment of second axis of local coordinate system.
- faces() - Method in interface nxopen.mechatronics.TransportSurfaceBuilder
-
Returns the faces.
- FACES - Static variable in class nxopen.preferences.PartVisualizationColorSetting.RandomColorDisplayFor
-
For Faces
- faces() - Method in interface nxopen.routing.FittingOverstockBuilder
-
Returns the faces to apply overstock to.
- faces() - Method in interface nxopen.routing.OverstockFacesBuilder
-
Returns the faces qualified for overstock application.
- FACES - Static variable in class nxopen.Selection.SelectionType
-
Filter to select all face types
- faces - Variable in class nxopen.uf.UFCurve.AskIsoclineData
-
- faces - Variable in class nxopen.uf.UFDie.AskDrawFacesData
-
- faces - Variable in class nxopen.uf.UFGdt.AskFacesData
-
- faces - Variable in class nxopen.uf.UFGdt.SurfaceParms
-
- faces - Variable in class nxopen.uf.UFModeling.AskMergedFacesData
-
- faces - Variable in class nxopen.uf.UFModeling.AskSplitFacesData
-
- faces - Variable in class nxopen.uf.UFModl.ComparePartEntitiesData
-
- faces - Variable in class nxopen.uf.UFModl.ComparePartEntitiesData3
-
- Faces() - Constructor for class nxopen.uf.UFModl.Faces
-
- Faces(int, Tag[], UFModl.FaceExtension) - Constructor for class nxopen.uf.UFModl.Faces
-
- faces - Variable in class nxopen.uf.UFModl.Faces
-
- faces - Variable in class nxopen.uf.UFModl.IdentifyExteriorUsingHlData
-
- faces - Variable in class nxopen.uf.UFModl.IdentifyExteriorUsingRaysData
-
- faces - Variable in class nxopen.uf.UFModl.LinkedExt
-
- faces - Variable in class nxopen.uf.UFSf.AskIdealizeParmFacesData
-
- faces - Variable in class nxopen.uf.UFSf.BodyAskFacesData
-
- faces - Variable in class nxopen.uf.UFSf.EdgeAskFacesData
-
- faces - Variable in class nxopen.uf.UFSf.FaceAskAdjacentFacesData
-
- faces - Variable in class nxopen.uf.UFSmd.AskFpFacesData
-
- FACES2SURFACES - Static variable in class nxopen.features.shipdesign.Cutout2Builder.CreationMethod
-
1 face and 2 surfaces are used to place this cutout
- FACES_AND_TRIM - Static variable in class nxopen.features.ChamferBuilder.OffsetMethod
-
Offset faces and trim
- FACES_BETWEEN_SURFACES_SURFACE - Static variable in class nxopen.features.shipdesign.Cutout2Builder.CreationMethod
-
1 face and 3 surfaces are used to place this cutout
- FACES_CENTERED - Static variable in class nxopen.features.shipdesign.Cutout2Builder.CreationMethod
-
1 face is used to place this cutout
- FACES_DO_NOT_MATCH_UV_RANGE - Static variable in class nxopen.uf.UFConstants
-
- FACES_ON_DIFFERENT_BODIES - Static variable in class nxopen.uf.UFConstants
-
- FACES_ONLY - Static variable in class nxopen.cam.ProfileStrategy.Types
-
Profile strategy: Faces Only
- FACES_THEN_DIAMETERS - Static variable in class nxopen.cam.ProfileStrategy.Types
-
Profile strategy: Faces First, Then Diameters
- FACES_WITH_ATTRIBUTES - Static variable in class nxopen.features.shipdesign.EndCutBuilder.SelectionTypes
-
If this Selection Type is set, just faces need to be specifed and placement edges will be inferred automatically.
- facesCons - Variable in class nxopen.features.MeshSurfaceBuilder.FaceConstraintCollectorsData
-
Number of faces on each side
- faceSearchOption() - Method in interface nxopen.cae.MMCCreateBuilder
-
Returns the face search option
License requirements: None.
- facesEid - Variable in class nxopen.uf.UFModl.ReblendFace
-
- faceSelect() - Method in interface nxopen.cae.FreezeGeometryBuilder
-
Returns the faceselect
License requirements: nx_masterfem ("Finite Element Modeling")
.
- faceSelect() - Method in interface nxopen.weld.JointmarkFaceSetsBuilder
-
Returns the selected face collector
License requirements: ugweld ("UG WELD")
.
- faceSelectAllFaces() - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
Returns the option for turning on/off the selection of all faces on the Face Tab page.
- faceSelectCrossoverFaces() - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
Returns the option for turning on/off the highlight of the crossover faces on the Face Tab page.
- faceSelectedFacesTranslucency() - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
Returns the translucency for the selected faces on the Face Tab page.
- faceSelection() - Method in interface nxopen.cae.FluidDomainBuilder
-
Returns the face selection
License requirements: None.
- faceSelection() - Method in interface nxopen.cae.LaminateDrapingDataBuilder
-
Returns the selected faces.
- faceSelection() - Method in interface nxopen.mfg.am.SupportBuilder
-
Returns the face selection
License requirements: None.
- faceSelectNegativeFaces1() - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
Returns the option for turning on/off the highlight of the negative small radius faces on the Face Tab page.
- faceSelectNegativeFaces2() - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
Returns the option for turning on/off the highlight of the negative faces on the Face Tab page.
- faceSelectPositiveFaces1() - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
Returns the option for turning on/off the highlight of the positive faces on the Face Tab page.
- faceSelectPositiveFaces2() - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
Returns the option for turning on/off the highlight of the positive small radius faces on the Face Tab page.
- faceSelectUndercutAreas() - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
Returns the option for turning on/off the highlight of the undercut area faces on the Face Tab page.
- faceSelectUndercutEdges() - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
Returns the option for turning on/off the highlight of the undercut edges on the Face Tab page.
- faceSelectVerticalFaces() - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
Returns the option for turning on/off the highlight of the vertical faces on the Face Tab page.
- faceSet1() - Method in interface nxopen.features.subdivision.SubdivisionBridgeFaceBuilder
-
Returns the first face set.
- faceSet1() - Method in interface nxopen.weld.FilletBuilder
-
Returns the face set1.
- faceSet1() - Method in interface nxopen.weld.WeldGrooveBuilder
-
Returns the face set1
License requirements: ugweld ("UG WELD")
.
- faceSet2() - Method in interface nxopen.features.subdivision.SubdivisionBridgeFaceBuilder
-
Returns the second face set.
- faceSet2() - Method in interface nxopen.weld.FilletBuilder
-
Returns the face set2.
- faceSet2() - Method in interface nxopen.weld.WeldGrooveBuilder
-
Returns the face set2
License requirements: ugweld ("UG WELD")
.
- faceSetAllFacesColor() - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
Action button for setting color on all faces on the Face Tab page.
- faceSetAngleExpressionList() - Method in interface nxopen.features.DraftBuilder
-
Returns the list of draft faces SC Collectors and corresponding draft angles.
- FaceSetData - Interface in nxopen.geometricutilities
-
- faceSetData() - Method in interface nxopen.Part
-
Returns the FaceSetDataCollection instance belonging to this part .
- FaceSetData() - Constructor for class nxopen.weld.WeldPointBuilder.FaceSetData
-
- FaceSetDataCollection - Interface in nxopen.geometricutilities
-
- FaceSetOffset - Interface in nxopen.geometricutilities
-
This class represents a face set (collector) offset data.
- FaceSetOffsetCollection - Interface in nxopen.geometricutilities
-
This class contains the factory methods for creating an face set offset.
- FaceSetOffsetList - Interface in nxopen.geometricutilities
-
Represents a list of objects.
- faceSetOffsets() - Method in interface nxopen.Part
-
Returns the FaceSetOffsets instance belonging to this part .
- faceSets() - Method in interface nxopen.features.OffsetSurfaceBuilder
-
Returns the list of face sets.
- faceSetsList() - Method in interface nxopen.weld.JointmarkBuilder
-
Returns the list of face sets
License requirements: ugweld ("UG WELD")
.
- facesetsupdated - Variable in class nxopen.weld.JointmarkBuilder.FromReuseFeaturesData
-
Indicates if the face set list was updated.
- faceSheet(Feature) - Method in interface nxopen.die.DieCollection
-
- FaceSheet - Interface in nxopen.features
-
Represents a Face Sheet feature
To create or edit an instance of this class, use
FaceSheetBuilder
Created in NX5.0.0
- FaceSheetBuilder - Interface in nxopen.die
-
Represents a Face Sheet feature
This is an abstract class, and cannot be created.
- FaceSlotFacesRule - Interface in nxopen
-
- FaceSlotFacesRule.DefiningData - Class in nxopen
-
- faceSmoothing() - Method in interface nxopen.cae.PolygonFaceOnMeshBuilder
-
Returns the angle
License requirements: None.
- facesOfFeatures1 - Variable in class nxopen.EdgeIntersectRule.Data
-
Faces of feature1 whose boundary edges are used to create this rule.
- facesOfFeatures2 - Variable in class nxopen.EdgeIntersectRule.Data
-
Faces of feature2 whose boundary edges are used to create this rule.
- FaceSplitBuilder - Interface in nxopen.tooling
-
- FaceSplitBuilder.FaceSplitType - Class in nxopen.tooling
-
the type for Split Face
- FaceSplitCollection - Interface in nxopen.tooling
-
Creates Face Split collection
To obtain an instance of this class, refer to
ToolingManager
Created in NX7.0.0
- faceSplits() - Method in interface nxopen.tooling.ToolingManager
-
Returns the FaceSplitCollection instance belonging to this part .
- FacesSequence - Interface in nxopen.cam
-
Represents faces sequence .
- facesSequence() - Method in interface nxopen.cam.TurnCutParameters
-
Returns the Faces Sequence
License requirements: None.
- FacesSequence.Types - Class in nxopen.cam
-
The faces sequence options .
- facesToAnalyze() - Method in interface nxopen.cam.NCAssistantBuilder
-
Returns the Faces to Analyze
License requirements: None.
- facesToChangeThickness() - Method in interface nxopen.features.ChangeShellThicknessBuilder
-
Returns the faces to be selected to change thickness
License requirements: None.
- faceStock() - Method in interface nxopen.cam.BoundaryTurnBlank
-
Returns the face stock
License requirements: None.
- faceStockBuilder() - Method in interface nxopen.cam.TurnMethodBuilder
-
Returns the face stock builder (inheritable double)
License requirements: cam_base ("CAM BASE")
.
- facesToDivide() - Method in interface nxopen.features.DividefaceBuilder
-
Returns the Faces to Divide
License requirements: None.
- facesToDraft() - Method in interface nxopen.features.DraftBodyBuilder
-
Returns the faces to draft
License requirements: None.
- facesToExclude() - Method in interface nxopen.features.AdaptiveShellBuilder
-
Returns the faces to be excluded
License requirements: None.
- facesToExtract() - Method in interface nxopen.features.ExtractFaceBuilder
-
- facesToFlatten() - Method in interface nxopen.features.shipdesign.ShellExpansionBuilder
-
Returns the faces to flatten
License requirements: None.
- facesToMerge() - Method in interface nxopen.features.subdivision.SubdivisionMergeFaceBuilder
-
Returns the faces to merge.
- facesToMove() - Method in interface nxopen.features.DimensionBuilder
-
Returns the faces being moved as part of the Linear Dimension command
License requirements: None.
- facesToMoveToDraftedFace() - Method in interface nxopen.features.DraftBodyBuilder
-
Returns the faces to move to drafted face
License requirements: None.
- facesToOptimize() - Method in interface nxopen.features.OptimizeFaceBuilder
-
Returns the faces to optimize
License requirements: None.
- facesToPierce() - Method in interface nxopen.features.AdaptiveShellBuilder
-
Returns the faces to be pierced
License requirements: None.
- facesToPierce() - Method in interface nxopen.features.ShellFaceBuilder
-
Returns the faces to be pierced
License requirements: None.
- facesToShell() - Method in interface nxopen.features.ShellFaceBuilder
-
Returns the faces to be shelled
License requirements: None.
- facesToSplit() - Method in interface nxopen.features.subdivision.SubdivisionSplitFaceBuilder
-
Returns the faces to split.
- facesToSubdivide() - Method in interface nxopen.features.subdivision.SubdivisionSubdivideFaceBuilder
-
Returns the faces to subdivide.
- facesToUntrim() - Method in interface nxopen.features.UntrimBuilder
-
Returns the faces to untrim
License requirements: None.
- faceStyle - Variable in class nxopen.cae.Post.EdgeFace
-
- faceStyle - Variable in class nxopen.cae.Post.PrimaryEdgeFace
-
- FACET - Static variable in class nxopen.facet.PolygonModelingBuilder.ConvertTypes
-
- facet() - Method in interface nxopen.UFSession
-
- FACET_BASED - Static variable in class nxopen.tooling.ValidCheckBuilder.AnalysisMode
-
Facet body will be used to do checking
- FACET_BODIES - Static variable in class nxopen.cam.Preferences.SelectionTypes
-
facet bodies
- FACET_BODIES - Static variable in class nxopen.features.GlobalShapingBuilder.DeformBodyType
-
Facet bodies
- FACET_BODY - Static variable in class nxopen.features.FitCurveBuilder.TargetSourceTypes
-
Facet body
- FACET_BODY - Static variable in class nxopen.features.RapidSurfaceBuilder.AttachmentTypes
-
attach to facet body
- FACET_BODY_DISTANCE - Static variable in class nxopen.tooling.RunSimulationBuilder.CollisionCheckOptions
-
Measure facet bodies distance to do collision check
- FACET_GEOM_TYPE - Static variable in class nxopen.uf.UFCam.BlankGeomType
-
- FACET_NORMAL - Static variable in class nxopen.facet.SnipFacetBodyBuilder.DirectionType
-
Snip along facet normal
- FACET_VERTEX - Static variable in class nxopen.InferSnapType.SnapType
-
Snap point on facet vertex
- faceTag - Variable in class nxopen.uf.UFCurve.OcfFaceData
-
- faceTag - Variable in class nxopen.uf.UFDisp.FaceFacetData
-
- faceTag - Variable in class nxopen.uf.UFSf.OrientationData
-
- faceTag - Variable in class nxopen.uf.UFWeld.SpotFaceLoc
-
- faceTag - Variable in class nxopen.uf.UFWeld.SpotFaceLocation
-
- faceTags - Variable in class nxopen.uf.UFMotion.PointOnSurfaceData
-
- faceTags - Variable in class nxopen.uf.UFSf.EfConnInfo
-
- FaceTangentRule - Interface in nxopen
-
Represents a
SelectionIntentRule
that collects tangent connected faces from the body of the seed face.
- FaceTangentRule.Data - Class in nxopen
-
- facetAngleTol - Variable in class nxopen.uf.UFDisp.SystemParams
-
- facetBodies - Variable in class nxopen.cam.PreprocessGeometryBuilder.ObjectsData
-
the facet bodies, corresponding to facet bodies
- facetBodies() - Method in interface nxopen.facet.AdjustMinimumRadiusBuilder
-
Returns the input facet body list.
- facetBodies() - Method in interface nxopen.facet.CurvatureBuilder
-
- facetBodies() - Method in interface nxopen.facet.DecimateFacetBodyBuilder
-
- facetbodies - Variable in class nxopen.facet.FacetedBodyCollection.CreateFacetBodyData
-
- facetBodies() - Method in interface nxopen.facet.FeatureExtractionBuilder
-
Returns the input facet body selection list
License requirements: None.
- facetBodies() - Method in interface nxopen.facet.SmoothFacetBodyBuilder
-
- facetBodies() - Method in interface nxopen.facet.SnipFacetBodyBuilder
-
- facetBodies() - Method in interface nxopen.facet.SubdivideFacetBodyBuilder
-
- facetBodies() - Method in interface nxopen.features.ToolingBoxBuilder
-
Returns the selected facet bodies.
- facetBodies() - Method in interface nxopen.features.vehicledesign.HoodVisibilityBuilder
-
Returns the hood facet body
License requirements: None.
- facetBodies() - Method in interface nxopen.NXTo2dCreator
-
Returns the facet bodies - if set to true facet bodies will be exported to 2d part
License requirements: None.
- facetbody - Variable in class nxopen.Body.FacetedBodyData
-
- facetBody() - Method in interface nxopen.facet.ExtrudeFacetBodyBuilder
-
Returns the facet/sheet bodies to be extruded
License requirements: None.
- facetBody() - Method in interface nxopen.facet.RemoveUndercutsBuilder
-
Returns the facet body.
- facetBody() - Method in interface nxopen.features.FillHoleBuilder
-
Returns the facet body to which the fill hole patch is fitted to
License requirements: None.
- facetBody() - Method in interface nxopen.features.OffsetFacetBodyBuilder
-
Returns the facet bodies to be offseted
License requirements: None.
- facetBody() - Method in interface nxopen.features.RapidSurfaceBuilder
-
- facetBodyCollector() - Method in interface nxopen.facet.DivideFacetFaceBuilder
-
Returns the collector for specifying facet bodies to be divided based on colored regions.
- FacetBodyFromBodyBuilder - Interface in nxopen.facet
-
- FacetBodyFromBodyBuilder.OriginalBodyOptions - Class in nxopen.facet
-
These options represent the options for handling original body: Keep, Hide, Delete
- FacetBodyFromBodyBuilder.OutputTypes - Class in nxopen.facet
-
These options represent the type of output body
- facetBodyOne() - Method in interface nxopen.facet.BridgeFacetBodyBuilder
-
Returns the first NX facet body to be bridged
License requirements: None.
- facetBodyOne() - Method in interface nxopen.facet.MergeFacetBodyBuilder
-
Returns the first NX facet body to be merged
License requirements: None.
- facetBodyTwo() - Method in interface nxopen.facet.BridgeFacetBodyBuilder
-
Returns the second NX facet body to be bridged
License requirements: None.
- facetBodyTwo() - Method in interface nxopen.facet.MergeFacetBodyBuilder
-
Returns the second NX facet body to be merged
License requirements: None.
- facetBodyType() - Method in interface nxopen.facet.STLImportBuilder
-
Returns the facet body type
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- facetCacheMemoryLevel() - Method in interface nxopen.DisplayManager
-
Returns the memory level of the display facet cache system.
- facetChordTol - Variable in class nxopen.uf.UFDisp.SystemParams
-
- facetCollector() - Method in interface nxopen.blockstyler.SelectFacetRegion
-
Returns the OwningFacetCollector.
- facetCollector() - Method in interface nxopen.facet.DecimateFacetBodyBuilder
-
Returns a collector of facets on the facet bodies to be decimated.
- facetCollector() - Method in interface nxopen.facet.DivideFacetFaceBuilder
-
Returns the collector for specifying facet regions
License requirements: None.
- facetCollector() - Method in interface nxopen.facet.PaintFacetBodyBuilder
-
Returns a collector of facets on the facet bodies to be to be tested.
- facetCollector() - Method in interface nxopen.facet.SmoothFacetBodyBuilder
-
Returns a collector of facets on the facet bodies to be to be smoothed.
- facetCollector() - Method in interface nxopen.facet.SnipFacetBodyBuilder
-
Returns the collector of facets to be snipped.
- facetCollector() - Method in interface nxopen.facet.SubdivideFacetBodyBuilder
-
Returns a collector of facets on the facet bodies to be subdivided.
- FacetCollector - Interface in nxopen
-
- FacetCollectorCollection - Interface in nxopen
-
This class contains the factory method for creating a facet collector.
- facetCollectorCollection() - Method in interface nxopen.Part
-
Returns the FacetCollectorCollection instance belonging to this part .
- facetContactTolerance - Variable in class nxopen.uf.UFMotion.Ask3dContactMethodData
-
- facetDensity() - Method in interface nxopen.die.AddendumSectionBuilder
-
Returns the facet density.
- FACETED - Static variable in class nxopen.motion.BodyContactRecurdyn.SurfaceType
-
- FACETED - Static variable in class nxopen.motion.PackagingInterferenceBuilder.Mode
-
Interference calculated by Faceted method.
- FACETED_BODIES - Static variable in class nxopen.cam.Preferences.BlankSelectionTypes
-
Deprecated.
Faceted Bodies Region
- FACETED_BODIES - Static variable in class nxopen.cam.Preferences.PartSelectionTypes
-
Deprecated.
Faceted Bodies Region
- FACETED_BODIES - Static variable in class nxopen.die.SpringbackCompensationBuilder.DefinedByType
-
Facted bodies.
- FACETED_BODIES - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide faceted bodies
- FACETED_CONTACT - Static variable in class nxopen.uf.UFMotion.ContactMethod
-
- facetedBodies() - Method in interface nxopen.Part
-
Returns the FacetedBodyCollection instance belonging to this part .
- facetedBodiesToCombine() - Method in interface nxopen.facet.CombineFacetBodyBuilder
-
Returns the faceted bodies to combine
License requirements: None.
- facetedBodiesToConvert() - Method in interface nxopen.facet.ConvertFacetBodyBuilder
-
Returns the input facet bodies to convert
License requirements: None.
- FacetedBody - Interface in nxopen.facet
-
Represents a faceted body.
- FacetedBody.FacetedbodyType - Class in nxopen.facet
-
Body type .
- FacetedBodyCollection - Interface in nxopen.facet
-
Represents a collection of faceted bodies in a part
To obtain an instance of this class, refer to
Part
Created in NX5.0.0
- FacetedBodyCollection.AssociatedFacetedBodiesData - Class in nxopen.facet
-
- FacetedBodyCollection.CreateFacetBodyData - Class in nxopen.facet
-
- FacetedBodyCollection.Type - Class in nxopen.facet
-
Specifies the type of facets created when copying or converting faceted bodies
- FacetedBodyData() - Constructor for class nxopen.Body.FacetedBodyData
-
- FacetedEdge - Interface in nxopen.facet
-
Represents a faceted edge.
- FacetedEdge.CurveData - Class in nxopen.facet
-
- FacetedEdge.FacetededgeType - Class in nxopen.facet
-
Facet Edge type .
- FacetedEdge.VerticesData - Class in nxopen.facet
-
- FacetedFace - Interface in nxopen.facet
-
Represents a faceted face.
- FacetedFace.FacetedfaceType - Class in nxopen.facet
-
Facet Face type .
- FacetedFace.SurfaceData - Class in nxopen.facet
-
- facetEdgeTol - Variable in class nxopen.uf.UFDisp.SystemParams
-
- facetedModels - Variable in class nxopen.uf.UFFacet.AskModelsOfSolidData
-
- facetedRepresentation() - Method in interface nxopen.drawings.ViewStyleBaseBuilder
-
- faceThicknesses() - Method in interface nxopen.features.ShellBuilder
-
Returns the list of faces and corresponding alternate thickness for each.
- faceThicknessList() - Method in interface nxopen.features.ShellBuilder
-
- facetIdentifier() - Method in interface nxopen.IFacet
-
Returns the indentifier of facet in its owning entity
License requirements: gateway ("UG GATEWAY")
.
- facetImport() - Method in interface nxopen.DxfdwgImporter
-
Returns the DXFDWG Facet Import Option - set import Face3D entities option as either JT facets or Convergent bodies
License requirements: None.
- FacetingParameters - Class in nxopen.facet
-
The structure of JA faceting parameters
- FacetingParameters() - Constructor for class nxopen.facet.FacetingParameters
-
- FacetingParameters(int, boolean, double, double, boolean, double, double, double, boolean, boolean, double, boolean, int, boolean, Vector3d, double, boolean, boolean) - Constructor for class nxopen.facet.FacetingParameters
-
Constructor for the FacetingParameters object.
- facetModelingCollection() - Method in interface nxopen.facet.FacetedBodyCollection
-
Returns the FacetModelingCollection instance belonging to this part .
- FacetModelingCollection - Interface in nxopen.facet
-
Collection of freeform facet operations.
- faceToCopy() - Method in interface nxopen.features.CopyFaceBuilder
-
Returns the face recognition builder holding the faces to copy.
- faceToCut() - Method in interface nxopen.features.CutFaceBuilder
-
Returns the face recognition builder holding the faces to cut.
- faceToDeform() - Method in interface nxopen.features.IFormBuilder
-
Returns the face to deform.
- faceToDelete() - Method in interface nxopen.features.subdivision.SubdivisionDeleteFaceBuilder
-
- faceToDivide() - Method in interface nxopen.tooling.FaceSplitBuilder
-
Returns the faces to be divided
License requirements: None.
- faceToFix() - Method in interface nxopen.features.FixedBuilder
-
Returns the face recognition builder holding the faces to be fixed.
- faceToGroup() - Method in interface nxopen.features.GroupFaceBuilder
-
Returns the face recognition builder holding the faces to group.
- faceToLabel() - Method in interface nxopen.features.LabelNotchBlendBuilder
-
Returns the face collector.
- faceTolerance() - Method in interface nxopen.drawings.ViewStyleShadingBuilder
-
Returns the face tolerance data on the SHADING tab of the View Style Dialog
License requirements: None.
- faceTolerance() - Method in interface nxopen.fields.SpatialMapBuilder
-
Returns the face tolerance for 3D degenerate surface maps
License requirements: None.
- faceTolerance() - Method in interface nxopen.geometricutilities.DisplayResolutionBuilder
-
Returns the face tolerance
License requirements: None.
- faceTolerance - Variable in class nxopen.preferences.PartVisualizationShade.AdvVisViewFacetTolerancesData
-
- faceTolerance - Variable in class nxopen.preferences.PartVisualizationShade.ShadedViewFacetTolerancesData
-
- faceToMirror() - Method in interface nxopen.features.MirrorFaceBuilder
-
Returns the face to mirror.
- faceToMove() - Method in interface nxopen.features.AdmMoveFaceBuilder
-
Returns the face to move.
- faceToOffset() - Method in interface nxopen.features.AdmOffsetRegionBuilder
-
Returns the region faces to offset.
- faceToPatch() - Method in interface nxopen.tooling.RemoveHolesBuilder
-
Returns the face to patch
License requirements: None.
- faceToProjectTo() - Method in interface nxopen.features.ProjectCurveBuilder
-
Returns the face to project to
License requirements: None.
- faceToPull() - Method in interface nxopen.features.PullFaceBuilder
-
Returns the face collector.
- faceToReblend() - Method in interface nxopen.features.ReplaceBlendBuilder
-
Returns the face collector.
- faceToReplace() - Method in interface nxopen.features.ReplaceFaceBuilder
-
Returns the target faces to replace, only for replace type, don't use it until nx502
License requirements: None.
- faceToResize() - Method in interface nxopen.features.AdmResizeFaceBuilder
-
Returns the face collector holding the all the recognized blend faces adjacent to faces to resize.
- faceToReverseNormal() - Method in interface nxopen.geometricanalysis.FaceAnalysisNormalsBuilder
-
Returns the face to reverse normal
License requirements: None.
- faceToSimplify() - Method in interface nxopen.features.ReplaceFaceBuilder
-
Returns the face to simplify, only for simplify type, don't use it until nx502
License requirements: None.
- facetQuality - Variable in class nxopen.uf.UFDisp.ShadeOptions
-
- facetQualityOptions() - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder
-
Returns the facet quality options
License requirements: die_engineering ("DIE ENGINEERING")
.
- faceTranslucency() - Method in interface nxopen.tooling.FaceColorManagementBuilder
-
Returns the face translucency
License requirements: None.
- facetRegion() - Method in interface nxopen.facet.LocalOffsetBuilder
-
Returns the facets to be offset
License requirements: None.
- faceTrimMethod() - Method in interface nxopen.routing.FittingOverstockBuilder
-
- FACETS - Static variable in class nxopen.DxfdwgCreator.ExportFacesAsOptions
-
export faces as facets
- facetSelection() - Method in interface nxopen.facet.DetectPrimitivesBuilder
-
Returns the facet selection.
- FacetSelectionRule - Interface in nxopen
-
- FacetSelectionRuleFactory - Interface in nxopen
-
This class contains the factory methods for creating facet selection intent rules
To obtain an instance of this class, refer to
Part
Created in NX12.0.0
- facetSelectionRuleFactory() - Method in interface nxopen.Part
-
Returns the FacetSelectionRuleFactory instance belonging to this part .
- FacetSettingsBuilder - Interface in nxopen.display
-
- FacetSettingsBuilder.AdvVisToleranceSetting - Class in nxopen.display
-
Specifies which set of tolerances are to be used for rendering facets
for display for Advanced Visualization views.
- FacetSettingsBuilder.FacetScale - Class in nxopen.display
-
Denotes what type of scaling factor is applied to the corresponding tolerances used to generate facets.
- FacetSettingsBuilder.FacetToViewRatio - Class in nxopen.display
-
- FacetSettingsBuilder.FacetUpdate - Class in nxopen.display
-
Specifies whether an Update Display or Fit operation is to
regenerate the facets for only visible objects, for all objects or
for no objects.
- FacetSettingsBuilder.ShadedToleranceSetting - Class in nxopen.display
-
Specifies which set of tolerances are to be used for rendering facets
for display for Shaded views.
- facetSolid(Tag, UFFacet.Parameters) - Method in interface nxopen.uf.UFFacet
-
- facetsPerTopol - Variable in class nxopen.uf.UFStd.ImportStlAsciiFileData
-
- facetsQuality() - Method in interface nxopen.ModelingViewHighQualityImage
-
Returns the quality of the facets of the High Quality Image.
- facetToDeform() - Method in interface nxopen.features.GlobalShapingBuilder
-
Returns the facet to deform
License requirements: None.
- facetTolerance() - Method in interface nxopen.cam.InspectionCollisionAvoidanceBuilder
-
Returns the tolerance used for faceting the components
License requirements: None.
- facetTolerance() - Method in interface nxopen.sim.SinumerikCaFacetBuilder
-
Returns the facet tolerance
License requirements: None.
- facetTolerance - Variable in class nxopen.uf.UFMotion.StlParameters
-
- facetTransitionRegions() - Method in interface nxopen.facet.LocalOffsetBuilder
-
Returns the user-selected transition regions
License requirements: None.
- faceType() - Method in interface nxopen.facet.FacetedFace
-
Returns the type of the face
License requirements: None.
- faceUndercutAreasColor() - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
Returns the color for applying to the undercut area faces on the Face Tab page.
- faceUndercutEdgesColor() - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
Returns the color for applying to the undercut edges on the Face Tab page.
- faceVerticalFacesColor() - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
Returns the color for applying to the vertical faces on the Face Tab page.
- FACTOR - Static variable in class nxopen.cae.LocalRemeshBuilder.Option
-
Factor
- factor - Variable in class nxopen.uf.UFDrf.UdSymbolFontInfo
-
- factor - Variable in class nxopen.uf.UFModeling.AskScaleData
-
- factor - Variable in class nxopen.uf.UFModlFeatures.AskLocalScaleData
-
- FACTOR_OF_DIAMETER - Static variable in class nxopen.cae.connections.HeadDiameterType
-
User defined relationship with bolt diameter
- factorOfSafety() - Method in interface nxopen.cae.DurabilityEventStrengthSettingsBuilder
-
Returns the factor of safety.
- factorValue() - Method in interface nxopen.cae.LocalRemeshBuilder
-
Returns the factor value
License requirements: None.
- FACTORY - Static variable in class nxopen.linedesigner.DBNode.NodeType
-
- FactoryCadGeoEquipmentAssemblyBuilder - Interface in nxopen.linedesigner
-
To create a new instance of this class, use nxopen.linedesigner.LineDesignerManager#createFactorycadgeoequipmentassemblyBuilder
Created in NX11.0.1
- FactoryCadGeoEquipmentAssemblyBuilder.UpdatedControlData - Class in nxopen.linedesigner
-
Contains feature update status report
- FactoryCadGeoEquipmentBuilder - Interface in nxopen.linedesigner
-
To create a new instance of this class, use nxopen.linedesigner.LineDesignerManager#createFactorycadgeoequipmentBuilder
Created in NX11.0.0
- FactoryCadGeoEquipmentBuilder.UpdatedControlData - Class in nxopen.linedesigner
-
Contains feature update status report
- factoryType() - Method in interface nxopen.linedesigner.CreateFactoryElementBuilder
-
Returns an API that gets element type
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- FAHRENHEIT - Static variable in class nxopen.cam.InspectionCmmCommandBuilder.TemperatureUnitsOptions
-
Use fahrenheit
- FAIL - Static variable in class nxopen.cam.CutterExport.HolderExportStatus
-
Holder export failed
- FAIL - Static variable in class nxopen.cam.CutterExport.TrackpointExportStatus
-
Trackpoint export failed
- FAIL - Static variable in class nxopen.die.DieBuildStatusOption
-
Sub feature build has failed.
- FAIL - Static variable in class nxopen.features.shipdesign.ExamineSteelFeatureBuilderResult
-
No pass
- FAIL - Static variable in class nxopen.mechanicalrouting.LogicalDesignService.MappingStatus
-
- failCode - Variable in class nxopen.uf.UFPs.Unexported
-
- FAILED - Static variable in class nxopen.cae.aerostructures.author.ABB.Status
-
ABB computation failed
- FAILED - Static variable in class nxopen.cae.modelcheck.ElementQualityCheckBuilder.OutputElements
-
Creates OUTPUT group with failed elements
- FAILED - Static variable in class nxopen.cae.modelcheck.ElementQualityCheckBuilder.ReportFormat
-
Only lists check results for elements with error results in the report
- FAILED - Static variable in class nxopen.cae.modelcheck.TestValueTypes.Result
-
indicates the test value violates the error criteria value
- FAILED - Static variable in class nxopen.geometricanalysis.GeometricProperties.Status
-
Failed to find all geometric
properties
- failed - Variable in class nxopen.uf.UFAssem.UpgradeStatus
-
- failed - Variable in class nxopen.uf.UFPart.LoadStatus
-
- FAILED - Static variable in class nxopen.validate.OverrideBuilder.ToStates
-
- FAILED - Static variable in class nxopen.Validation.Result
-
Validation Failed
- FAILED - Static variable in class nxopen.weld.ConnectionFinderBuilder.FilterTypes
-
- FAILED_AND_WARNING - Static variable in class nxopen.cae.modelcheck.ElementQualityCheckBuilder.OutputElements
-
Creates OUTPUT group with both warning and failed elements
- FAILED_AND_WARNING - Static variable in class nxopen.cae.modelcheck.ElementQualityCheckBuilder.ReportFormat
-
Lists check results for elements with both error and warning results in the report
- FAILED_FIND_CLOSEST - Static variable in class nxopen.uf.UFConstants
-
- failedElementsColor() - Method in interface nxopen.cae.modelcheck.ElementQualityCheckBuilder
-
Returns the display color of failed elements
License requirements: None.
- FailedObjectsData() - Constructor for class nxopen.weld.WeldAdvisorBuilder.FailedObjectsData
-
- failedobjs - Variable in class nxopen.motion.PostProcess.CreateEnvelopeData
-
The objects failed because of an algorithm failure
- failedProfiles - Variable in class nxopen.features.shipdesign.InverseBendingLinesBuilder.FailedProfilesData
-
The profiles that failed.
- FailedProfilesData() - Constructor for class nxopen.features.shipdesign.InverseBendingLinesBuilder.FailedProfilesData
-
- failedReasons - Variable in class nxopen.features.shipdesign.InverseBendingLinesBuilder.FailedProfilesData
-
The error code for each failure.
- failGroupName() - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
Returns the fail group name
License requirements: None.
- failingParts - Variable in class nxopen.uf.UFWave.LoadParentsData
-
- failingStatuses - Variable in class nxopen.uf.UFWave.LoadParentsData
-
- failingWoundEdges - Variable in class nxopen.uf.UFModlFeatures.CreateSimplifyData
-
- failingWoundEdges - Variable in class nxopen.uf.UFModlFeatures.EditSimplifyParmsData
-
- failingWoundEdges - Variable in class nxopen.uf.UFSf.CreateIdealizeBodyData
-
- failingWoundEdges - Variable in class nxopen.uf.UFSf.CreateIdealizeRegionData
-
- failingWoundEdges - Variable in class nxopen.uf.UFSf.EditIdealizeParmsData
-
- FAILURE - Static variable in class nxopen.features.SketchConversionStatus.Type
-
Convert to sketch failed
- FAILURE - Static variable in class nxopen.RuleManager.InitializationStatusType
-
Initialization failed
- FAILURE_INDEX - Static variable in class nxopen.cae.Result.Quantity
-
- FAILURE_MODE - Static variable in class nxopen.cae.aerostructures.MarginResultTableDataProvider.ColumnType
-
- failureAction - Variable in class nxopen.uf.UFAssem.LoadOptions
-
- failureAction - Variable in class nxopen.uf.UFAssem.Options
-
- failureIndex() - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder
-
Returns the failure index.
- failureIndex() - Method in interface nxopen.cae.DurabilityResultsReportBuilder
-
Returns the failure index toggle
License requirements: None.
- failureIndex() - Method in interface nxopen.cae.LaminateGraphicalReportBuilder
-
Returns the failure index result
License requirements: None.
- failureIndex() - Method in interface nxopen.cae.LaminateQuickReportBuilder
-
Returns the ply and bonding failure indices
License requirements: None.
- failureIndex() - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
Returns the failure index
License requirements: None.
- failureIndexRule() - Method in interface nxopen.cae.LaminateGraphicalReportBuilder
-
Returns the failure index rule
License requirements: None.
- failureIndexRule() - Method in interface nxopen.cae.LaminateQuickReportBuilder
-
Returns the ply and bonding failure indices rule
License requirements: None.
- failureIndexRule() - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
Returns the failure index summary table enveloping rule
License requirements: None.
- failureLowerLimit - Variable in class nxopen.optimization.DesignStudyBuilder.DesignStudyObjective
-
Failure Lower limit
- failureMode() - Method in interface nxopen.cae.LaminateGraphicalReportBuilder
-
Returns the failure mode for failure index, strength ratio and margin of safety calculation
License requirements: None.
- failureMode() - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
Returns the failure mode
License requirements: None.
- failureShowIsocline() - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder
-
Returns the failure show isocline
License requirements: die_engineering ("DIE ENGINEERING")
.
- failureUpperLimit - Variable in class nxopen.optimization.DesignStudyBuilder.DesignStudyObjective
-
Failure Upper limit
- failureValue() - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder
-
Returns the failure value
License requirements: die_engineering ("DIE ENGINEERING")
.
- FALL_OFF_CONSTANT - Static variable in class nxopen.uf.UFView.LightFallOff
-
- FALL_OFF_CONSTANT_INVERSE_LINEAR - Static variable in class nxopen.uf.UFView.LightFallOff
-
- FALL_OFF_CONSTANT_INVERSE_SQUARE - Static variable in class nxopen.uf.UFView.LightFallOff
-
- FALL_OFF_INVERSE_LINEAR - Static variable in class nxopen.uf.UFView.LightFallOff
-
- FALL_OFF_INVERSE_SQUARE - Static variable in class nxopen.uf.UFView.LightFallOff
-
- FALLOFF - Static variable in class nxopen.features.StudioXformBuilder.AdvancedMethodType
-
Deprecated.
Fall off
- FALLOFF - Static variable in class nxopen.features.StudioXformBuilderEx.AdvancedMethodType
-
Deprecated.
Fall off, it is deprecated in NX85 release
- fallOff - Variable in class nxopen.uf.UFView.LightAttributes
-
- fallOffFactor() - Method in interface nxopen.features.subdivision.TransformCageData
-
Returns the falloff factor.
- fallOffMethod() - Method in interface nxopen.features.subdivision.TransformCageData
-
Returns the falloff method.
- fallOffObjects() - Method in interface nxopen.features.subdivision.TransformCageData
-
Returns the falloff objects.
- fallOffReset() - Method in interface nxopen.features.StudioXformBuilder
-
- fallOffReset() - Method in interface nxopen.features.StudioXformBuilderEx
-
Reset the fall off scale
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- fallOffScale() - Method in interface nxopen.features.StudioXformBuilder
-
- fallOffScale() - Method in interface nxopen.features.StudioXformBuilderEx
-
Returns the fall off scale
License requirements: None.
- FALSE - Static variable in class nxopen.ame.OperatorRuleBuilder.NegationValue
-
- FALSE - Static variable in class nxopen.assemblies.ClearanceSet.ReanalyzeOutOfDateExcludedPairs
-
- FALSE - Static variable in class nxopen.assemblies.ComponentAssembly.CloseModified
-
Close only unmodified parts, not modified parts
- FALSE - Static variable in class nxopen.assemblies.PartitionSearchTerm.IncludeChildren
-
Do not include Partition children while finding results by this search term
- FALSE - Static variable in class nxopen.AttributePropertiesBaseBuilder.BooleanValueOptions
-
False
- FALSE - Static variable in class nxopen.AttributeTemplatesBuilder.DefaultBooleanOptions
-
False
- FALSE - Static variable in class nxopen.BasePart.CloseAfterSave
-
- FALSE - Static variable in class nxopen.BasePart.CloseWholeTree
-
- FALSE - Static variable in class nxopen.BasePart.SaveComponents
-
- FALSE - Static variable in class nxopen.cam.NCGroupCollection.UseDefaultName
-
don't user the default name
- FALSE - Static variable in class nxopen.cam.OperationCollection.UseDefaultName
-
don't user the default name
- FALSE - Static variable in class nxopen.mechatronics.ProxyOverrideObjectBuilder.AttrBoolValue
-
- FALSE - Static variable in class nxopen.options.LevelLockedByDefault
-
Unlocked
- FALSE - Static variable in class nxopen.preferences.RoutingPart.UsePreferredPort
-
- FALSE - Static variable in class nxopen.preferences.RoutingPath.AddPointsToSpline
-
Do not merge duplicate RCPs.
- FALSE - Static variable in class nxopen.preferences.RoutingPath.ConfirmBranchSel
-
Do not confirm branch selection.
- FALSE - Static variable in class nxopen.preferences.RoutingPath.ContinueUpdOnError
-
- FALSE - Static variable in class nxopen.preferences.RoutingPath.CreateSlopeConstraints
-
- FALSE - Static variable in class nxopen.preferences.RoutingPath.CreateSmartRcps
-
Do not create smart RCPs.
- FALSE - Static variable in class nxopen.preferences.RoutingPath.CreateTangency
-
Do not merge duplicate RCPs.
- FALSE - Static variable in class nxopen.preferences.RoutingPath.DisplayObject
-
- FALSE - Static variable in class nxopen.preferences.RoutingPath.MergeDupRcps
-
Do not merge duplicate RCPs.
- FALSE - Static variable in class nxopen.preferences.RoutingPath.OccChainable
-
- FALSE - Static variable in class nxopen.Sketch.AlternateSolutionOption
-
Use the regular solution
- FALSE - Static variable in class nxopen.Sketch.CreateDimensionOption
-
Do not create a radius dimension
- FALSE - Static variable in class nxopen.Sketch.DeleteThirdCurveOption
-
Do not delete the 3rd curve
- FALSE - Static variable in class nxopen.Sketch.TrimInputOption
-
Do not trim the input curves
- FALSE - Static variable in class nxopen.Sketch.ViewReorient
-
Do not reorient view to sketch
- FALSE - Static variable in class nxopen.tooling.PocketBuilder.RsetType
-
false
- FALSE - Static variable in class nxopen.tooling.StandardPartBuilder.RefsetName
-
- FALSE_BODY - Static variable in class nxopen.tooling.ValidCheckBuilder.CheckingType
-
False body will be used to do checking
- falseBody() - Method in interface nxopen.tooling.BendInsertDesignBuilder
-
Returns the false body creation option.
- falseBodyHeight() - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
Returns the false body height.
- fam() - Method in interface nxopen.UFSession
-
- families - Variable in class nxopen.uf.UFPart.AskFamiliesData
-
- family() - Method in interface nxopen.partfamily.Instance
-
- family() - Method in interface nxopen.partfamily.InstanceSelectionCriteria
-
Returns the
Template
that corresponds to this criteria object
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX9.0.0
- family - Variable in class nxopen.uf.UFFam.AskInstanceData
-
- family - Variable in class nxopen.uf.UFFam.IntentData
-
- FamilyAttribute - Interface in nxopen.partfamily
-
- FamilyAttribute.AttrType - Class in nxopen.partfamily
-
The part family attribute types.
- familyCount - Variable in class nxopen.uf.UFPart.AskFamiliesData
-
- FamilyData() - Constructor for class nxopen.uf.UFFam.FamilyData
-
- FamilyData(int, int, int, Tag[], String) - Constructor for class nxopen.uf.UFFam.FamilyData
-
- familyDefaultDirectory() - Method in interface nxopen.SaveOptions
-
Returns the option that specifies the directory in which you want to
file part family members.
- FamilyMoldBuilder - Interface in nxopen.tooling
-
- FamilyMoldCollection - Interface in nxopen.tooling
-
- familyMolds() - Method in interface nxopen.tooling.ToolingManager
-
Returns the FamilyMoldCollection instance belonging to this part .
- famIntent - Variable in class nxopen.uf.UFAssem.InstanceIntent
-
- fanDistance() - Method in interface nxopen.cam.ToolAxisVariable
-
Returns the fan distance
License requirements: None.
- fanDistance() - Method in interface nxopen.cam.ToolPathTiltAvoidance
-
- fanDistance() - Method in interface nxopen.cam.ToolPathTiltBuilder
-
- fanDistance() - Method in interface nxopen.cam.ToolPathTiltTilting
-
Returns the fan distance
License requirements: None.
- FANFOLD_LEGAL_GERMAN - Static variable in class nxopen.PrintBuilder.PaperSize
-
German Legal Fanfold, 8 - by 13-inches
- FANFOLD_STANDARD_GERMAN - Static variable in class nxopen.PrintBuilder.PaperSize
-
German Std Fanfold, 8 1/2- by 12-inches
- FANFOLD_US - Static variable in class nxopen.PrintBuilder.PaperSize
-
US Std Fanfold, 14 7/8- by 11-inches
- FAR_TANTO - Static variable in class nxopen.cam.ToolPositioningBuilder.ToolPositioning
-
Far Tanto
- FAST - Static variable in class nxopen.cae.optimization.TBSTopologyControllerOptimizationParameters.Speed
-
Fast large step size
- FAST - Static variable in class nxopen.cam.SimulationOptionsBuilder.Resolution
-
use fast resolution
- FAST - Static variable in class nxopen.MovieSettingsBuilder.PlaybackSpeedChoices
-
Specifies fast playback speed (twice record speed)
- FAST - Static variable in class nxopen.optimization.OptimizationBuilder.OptimizationConvergenceSpeedType
-
Fast convergence speed
- FAST_INTERACTIVE - Static variable in class nxopen.display.IRayPlusStudioEditorBuilder.DynamicIRayPlusStudioRenderModeType
-
The fastest ray traced display performance with preview quality when dynamic interaction stops
- FAST_RMS_FITTED_PSD - Static variable in class nxopen.cae.XyFunctionDataType
-
Function is Fast RMS Fitted PSD
- FAST_RMS_FITTED_PSD - Static variable in class nxopen.cae.XyFunctionGeneralType
-
Function is Fast RMS Fitted PSD
- FAST_RMS_FITTED_PSD - Static variable in class nxopen.cae.XyFunctionLoadType
-
Function is Fast RMS Fitted PSD
- FAST_RMS_FITTED_PSD - Static variable in class nxopen.cae.XyFunctionResponseType
-
Function is Fast RMS Fitted PSD
- FAST_ROLLBACK - Static variable in class nxopen.preferences.SessionModeling.SaveDataForFeatureEditOption
-
Indicates the additional parasolid data is saved for faster rollback
- FAST_ROLLBACK_AND_PREVIOUS_STATE_OF_FAILED_FEATURE - Static variable in class nxopen.preferences.SessionModeling.SaveDataForFeatureEditOption
-
Indicates the additional parasolid data is saved for faster rollback and to show the previous state of failed feature
- fastenerAssembly() - Method in interface nxopen.tooling.ToolingManager
-
Returns the FastenerAssyCollection instance belonging to this part .
- fastenerAssemConfig() - Method in interface nxopen.tooling.ToolingManager
-
Returns the FastenerAssemConfigCollection instance belonging to this part .
- FastenerAssemConfigBuilder - Interface in nxopen.tooling
-
Represents a Fastener Assem Config Collection.
- FastenerAssemConfigCollection - Interface in nxopen.tooling
-
Represents a collection of FastenerAssy
To obtain an instance of this class, refer to
ToolingManager
Created in NX5.0.0
- FastenerAssy - Interface in nxopen.tooling
-
- FastenerAssy.HoleOperation - Class in nxopen.tooling
-
Represents the action on the hole menu of the fastener assembly.
- FastenerAssy.ModeMethod - Class in nxopen.tooling
-
Represents adding and editing modes for the fastener assembly
- FastenerAssy.SelectionObjectMethod - Class in nxopen.tooling
-
Represents selection object type
- FastenerAssy.SelectionTypeMethod - Class in nxopen.tooling
-
Represents selection type for position and hole
- FastenerAssy.StackTypeMethod - Class in nxopen.tooling
-
Represents screw_array type
- FastenerAssyCollection - Interface in nxopen.tooling
-
Represents a collection of FastenerAssy
To obtain an instance of this class, refer to
ToolingManager
Created in NX5.0.0
- fastenerAssyCustomization() - Method in interface nxopen.tooling.ToolingManager
-
Returns the FastenerAssyCustomizationCollection instance belonging to this part .
- FastenerAssyCustomizationBuilder - Interface in nxopen.tooling
-
Fastener assembly customization builder.
- FastenerAssyCustomizationCollection - Interface in nxopen.tooling
-
Represents a collection of FastenerAssyCustomizationBuilder
To obtain an instance of this class, refer to
ToolingManager
Created in NX8.0.0
- fastenerRemoveNode() - Method in interface nxopen.tooling.ToolingManager
-
Returns the FastenerRemoveNodeCollection instance belonging to this part .
- FastenerRemoveNodeBuilder - Interface in nxopen.tooling
-
Fastener remove node builder.
- FastenerRemoveNodeCollection - Interface in nxopen.tooling
-
Represents a collection of FastenerRemoveNodeBuilder
To obtain an instance of this class, refer to
ToolingManager
Created in NX8.0.0
- fastGunRotation(double) - Method in interface nxopen.tooldesigner.SetGunApproachBuilder
-
Fast gun movement
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- FastPlacementUtilityBuilder - Interface in nxopen.linedesigner
-
Fast Placement
Established by LineDesigner_LineDesignerManager whenever it is needed.
- fastRmsMethod() - Method in interface nxopen.cae.responsesimulation.RSEventAttributes
-
Returns the Use Fast RMS Method.
- FATIGUE_DAMAGE - Static variable in class nxopen.cae.Result.Quantity
-
- FATIGUE_LIFE - Static variable in class nxopen.cae.Result.Quantity
-
- FATIGUE_SAFETY_FACTOR - Static variable in class nxopen.cae.Result.Quantity
-
- fatigueCollection() - Method in interface nxopen.cae.DurabilityManager
-
Returns the durability fatigue collection belonging to this sim part.
- fatigueCycles - Variable in class nxopen.uf.UFSf.AskDursolNxData
-
- fatigueHistoryDataType() - Method in interface nxopen.cae.DurabilityEvaluateFatigueHistoryBuilder
-
Returns the fatigue history enum
License requirements: None.
- fatigueLifeCriterion() - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder
-
Returns the fatigue life criterion.
- fatigueLifeCriterion - Variable in class nxopen.uf.UFSf.AskDursolNxData
-
- fatigueSafetyFactor() - Method in interface nxopen.cae.DurabilityResultsReportBuilder
-
Returns the fatigue safety factor toggle
License requirements: None.
- fatigueSafetyFactorKeyin() - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder
-
Returns the fatigue safety factor keyin.
- fatigueSafetyFactorMethod() - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder
-
Returns the fatigue safety factor method.
- fatigueSafetyFactorOutput() - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder
-
Returns the fatigue safety factor output.
- fatigueSafetyFactorToggle() - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder
-
Returns the fatigue safety factor toggle.
- faultTags - Variable in class nxopen.uf.UFModeling.AskBodyConsistencyData
-
- faultTags - Variable in class nxopen.uf.UFModeling.AskBodyStructuresData
-
- faultTags - Variable in class nxopen.uf.UFModeling.AskFaceFaceIntersectData
-
- faultToken - Variable in class nxopen.uf.UFModeling.AskFaceSelfIntersectData
-
- faultTokens - Variable in class nxopen.uf.UFModeling.AskBodyConsistencyData
-
- favoriteIndex() - Method in interface nxopen.ColorDefinition
-
Returns the favorite index.
- favoriteIndex - Variable in class nxopen.uf.UFCgm.Color
-
- FB - Static variable in class nxopen.ame.MemorySectionType
-
- FB - Static variable in class nxopen.ame.PlcDataType
-
- FBD - Static variable in class nxopen.ame.ProgrammingLanguage
-
- fbmGeom() - Method in interface nxopen.UFSession
-
- FC - Static variable in class nxopen.ame.MemorySectionType
-
- FC - Static variable in class nxopen.ame.PlcDataType
-
- Fcf - Interface in nxopen.annotations
-
- fcf - Variable in class nxopen.uf.UFGdt.AskToleranceFromIndexData
-
- fcfAdditionalTextUnderline() - Method in interface nxopen.annotations.SymbolStyleBuilder
-
Returns the option to underline the additional FCF text
License requirements: None.
- FcfCollection - Interface in nxopen.annotations
-
Represents a collection of
Fcf
objects
To obtain an instance of this class, refer to
AnnotationManager
Created in NX4.0.0
- fcfCompare() - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
- FcfData - Interface in nxopen.annotations
-
Represents FCF data .
- FcfDatumReference - Interface in nxopen.annotations
-
- FcfFrame - Interface in nxopen.annotations
-
Represents an FCF frame .
- FcfFrameData - Interface in nxopen.annotations
-
Represents FCF frames data .
- fcfLeaderTerminatorCompare() - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
- fcfOriginCompare() - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
- fcfRetainedStatusCompare() - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
- fcfs() - Method in interface nxopen.annotations.AnnotationManager
-
Fcf collection .
- fcfs - Variable in class nxopen.uf.UFGdt.AskDatumReferencersData
-
- fcfs - Variable in class nxopen.uf.UFGdt.AskFcfTagsData
-
- fcfTextCompare() - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
- FCI - Static variable in class nxopen.geometricutilities.SmartVolumeProfileBuilder.CloseProfileRuleType
-
Extends the open profile to form
the first complete intersection with the target.
- FE_EDGE_GROUP - Static variable in class nxopen.cae.connections.LocationType
-
Group Of Element Edges
- FE_ENTITY - Static variable in class nxopen.cae.CaeSetGroupFilterType
-
filter type is any FE entity - node, element, element edge and element face
- FEA_SUMMARY_INFO - Static variable in class nxopen.uf.UFSf.ScenarioInfo
-
- feac - Variable in class nxopen.uf.UFModeling.AskHorzDimeData
-
- feac - Variable in class nxopen.uf.UFModeling.AskParaDistData
-
- feac - Variable in class nxopen.uf.UFModeling.AskPerpDistData
-
- feac - Variable in class nxopen.uf.UFModeling.AskVertDimeData
-
- feat - Variable in class nxopen.uf.UFModeling.AskUpdateUndoFeatData
-
- featCount - Variable in class nxopen.uf.UFModl.Features
-
- featDisplayDesPoints() - Method in interface nxopen.cam.InspectionMeasDataBuilder
-
Returns the option to display design points for a feature
License requirements: None.
- featDisplayMeaPoints() - Method in interface nxopen.cam.InspectionMeasDataBuilder
-
Returns the option to display measured points for a feature
License requirements: None.
- featDisplayReconstruct() - Method in interface nxopen.cam.InspectionMeasDataBuilder
-
Returns the option to display the reconstructed feature
License requirements: None.
- featHighlightNominal() - Method in interface nxopen.cam.InspectionMeasDataBuilder
-
Returns the option to highlight nominal faces for a feature
License requirements: None.
- featIfail - Variable in class nxopen.uf.UFModeling.AskUpdateUndoFeatData
-
- featTags - Variable in class nxopen.uf.UFModl.Features
-
- featType - Variable in class nxopen.uf.UFModl.Features
-
- FEATURE - Static variable in class nxopen.AttributePropertiesBaseBuilder.ObjectOptions
-
Deprecated.
Apply attribute to the feature in the select object list
- FEATURE - Static variable in class nxopen.cae.Post.EdgeStyle
-
- Feature - Interface in nxopen.cam.fbm
-
Interface for CAM Feature objects
This is an abstract class, and cannot be instantiated.
- FEATURE - Static variable in class nxopen.cam.HoleDrillingBuilder.ControlPointOffsetType
-
machining feature Z position
- FEATURE - Static variable in class nxopen.cam.InspectionConstructedFeatureBuilder.DirectionType
-
Use a feature (nominal/actual) for the vector
- FEATURE - Static variable in class nxopen.cam.Preferences.SelectionTypes
-
feature
- FEATURE - Static variable in class nxopen.cam.ProbeControlParametersBuilder.PrintType
-
Increment feature
- feature() - Method in interface nxopen.DatumAxis
-
Returns the feature associated with the datum axis.
- feature() - Method in interface nxopen.DatumPlane
-
Returns the feature associated with the datum plane.
- feature - Variable in class nxopen.FaceAllBlendRule.DefiningData
-
Feature which creates this rule
- feature - Variable in class nxopen.FaceConnectedBlendRule.DefiningData
-
Feature which creates this rule
- Feature - Interface in nxopen.features
-
Represents a feature on a part
This is an abstract class, and cannot be instantiated.
- feature() - Method in interface nxopen.features.IsolateFeatureBuilder
-
Returns the Feature to Isolate
License requirements: None.
- FEATURE - Static variable in class nxopen.features.shipdesign.CopyObjectsBuilder.Type
-
- FEATURE - Static variable in class nxopen.features.shipdesign.ManufacturingStockBuilder.ObjectType
-
Feature
- FEATURE - Static variable in class nxopen.features.shipdesign.MirrorShipStructureBuilder.Types
-
The feature type which is valid only in ship basic design application.
- feature() - Method in interface nxopen.features.shipdesign.QualifySketchBuilder
-
Returns the steel feture type.
- feature() - Method in interface nxopen.features.shipdesign.ShipPreparationInfo
-
Returns the feature generating this information.
- feature() - Method in interface nxopen.features.SketchConversionStatus
-
Returns the feature being converted to independent sketch.
- feature() - Method in interface nxopen.features.UserDefinedFeatureEditEvent
-
Returns the related UDF
License requirements: None.
- FEATURE - Static variable in class nxopen.MeasureAngleBuilder.ObjectType
-
- feature - Variable in class nxopen.Part.FeatureUpdateStatus
-
the feature
- FEATURE - Static variable in class nxopen.partfamily.FamilyAttribute.AttrType
-
feature attribute
- feature() - Method in interface nxopen.Sketch
-
Returns the feature associated with this sketch
License requirements: None.
- feature - Variable in class nxopen.tooling.AddReusableFeatureCollection.InputData
-
Reusable feature in edit mode
- feature - Variable in class nxopen.uf.UFModeling.AskHorzDimeData
-
- feature - Variable in class nxopen.uf.UFModeling.AskParaDistData
-
- feature - Variable in class nxopen.uf.UFModeling.AskVertDimeData
-
- feature - Variable in class nxopen.uf.UFSmd.SeqInput
-
- feature - Variable in class nxopen.uf.UFSmd.SeqOutput
-
- feature - Variable in class nxopen.weld.WeldObjectBuilder.FeatureInfo
-
the newly created or edited feature
- feature - Variable in class nxopen.weld.WeldPointExitBuilder.FeatureInfo
-
the newly created or edited feature
- Feature.BooleanType - Class in nxopen.features
-
Boolean operation type.
- Feature.DiagnosticType - Class in nxopen.features
-
Diagnostic type
- feature1() - Method in interface nxopen.MeasureAngleBuilder
-
Returns the feature1
License requirements: None.
- feature1 - Variable in class nxopen.uf.UFModeling.AskAngleEdgeData
-
- feature1 - Variable in class nxopen.uf.UFModeling.AskParaEdgeData
-
- feature1 - Variable in class nxopen.uf.UFModeling.AskPerpDistData
-
- feature2() - Method in interface nxopen.MeasureAngleBuilder
-
Returns the feature2
License requirements: None.
- feature2 - Variable in class nxopen.uf.UFModeling.AskAngleEdgeData
-
- feature2 - Variable in class nxopen.uf.UFModeling.AskParaEdgeData
-
- FEATURE_CONTROL_FRAME - Static variable in class nxopen.annotations.PmiFilterByType.Type
-
Indicates a PMI feature control frame type
- FEATURE_CONTROL_FRAME - Static variable in class nxopen.annotations.SearchModelViewBuilder.PmiTypes
-
feature control frame type
- FEATURE_CONTROL_FRAME - Static variable in class nxopen.drawings.AnnotationSettingsBuilder.AnnotationTypeEnum
-
- FEATURE_DIMENSION - Static variable in class nxopen.cae.optimization.DAODesignVariableBuilder.Variable
-
Feature dimension variables
- FEATURE_EDGE - Static variable in class nxopen.uf.UFGdt.DatumAssocType
-
- FEATURE_FAILURE_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
-
Feature failure component property
- FEATURE_GEOM_TYPE - Static variable in class nxopen.uf.UFCam.BlankGeomType
-
- FEATURE_INTERSECTION_EDGES - Static variable in class nxopen.SelectionIntentRule.RuleType
-
- FEATURE_OF_SIZE - Static variable in class nxopen.annotations.Dimension.MeasurementTypes
-
FeatureOfSize
- FEATURE_OF_SIZE - Static variable in class nxopen.annotations.SearchCriteriaDimensionBuilder.MeasurementTypes
-
Linear Feature of Size
- FEATURE_POINTS - Static variable in class nxopen.SelectionIntentRule.RuleType
-
- FEATURE_TYPE - Static variable in class nxopen.Part.PartFamilyAttrType
-
Deprecated.
feature attribute
- featureAngle() - Method in interface nxopen.cae.FluidDomainBuilder
-
Returns the feature angle specifies the minimum angle between the normals of 2 elements sharing an edge for the edge to be considered for snapping
License requirements: None.
- featureangletolerance - Variable in class nxopen.cae.ElemEdgePathMethod.SeedsData
-
if preferFeatureElementEdge is true, this is the feature angle tolerance to use
- featureArray - Variable in class nxopen.Selection.SelectFeaturesData
-
The selected features
- FeatureBasedGeomBuilder - Interface in nxopen.cam
-
- FeatureBendPropertiesBuilder - Interface in nxopen.features.sheetmetal
-
Represents a Sheetmetal Feature bend properties builder class.
- FeatureBendPropertiesBuilderList - Interface in nxopen.features.sheetmetal
-
Represents a list of objects.
- featureBendPropertiesList() - Method in interface nxopen.features.sheetmetal.FeatureBendPropertiesListBuilder
-
Returns the feature properties list
License requirements: None.
- FeatureBendPropertiesListBuilder - Interface in nxopen.features.sheetmetal
-
Represents a Sheetmetal Feature properties List builder class.
- FeatureBuilder - Interface in nxopen.features
-
Represents a Feature Builder to be used in the creation and modification of features.
- featureCanBeCopied(Tag) - Method in interface nxopen.uf.UFModeling
-
- FeatureCollection - Interface in nxopen.features
-
Represents a collection of features
To obtain an instance of this class, refer to
BasePart
Created in NX3.0.0
- FeatureCollection.CreateIntersectFeatureData - Class in nxopen.features
-
- FeatureCollection.CreateSubtractFeatureData - Class in nxopen.features
-
- FeatureCollection.CreateUniteFeatureData - Class in nxopen.features
-
- FeatureCollection.ReorderType - Class in nxopen.features
-
Reorder operation type.
- FeatureControlFrameBuilder - Interface in nxopen.annotations
-
- FeatureControlFrameBuilder.FcfCharacteristic - Class in nxopen.annotations
-
Specifies the characteristitic of the feature control frame
- FeatureControlFrameBuilder.FcfFrameStyle - Class in nxopen.annotations
-
Specifies whether the feature control frame is a single frame or composite
- featureControlFrameData() - Method in interface nxopen.annotations.FeatureControlFrameBuilder
-
The feature control frame data list. this method will always return at least two frames. for single feature control frames
(frame type is single frame type) only the first frame is used.
- FeatureControlFrameData - Interface in nxopen.annotations
-
- FeatureControlFrameDataBuilder - Interface in nxopen.annotations
-
Represents a FeatureControlFrameDataBuilder
.
- FeatureControlFrameDataBuilder.AreaSymbolType - Class in nxopen.annotations
-
Specifies the unit type
- FeatureControlFrameDataBuilder.ToleranceMaterialModifier - Class in nxopen.annotations
-
Specifies the tolerance material modifier condition
- FeatureControlFrameDataBuilder.ToleranceZoneShape - Class in nxopen.annotations
-
Specifies the zone shape for the feature control frame
- FeatureControlFrameDataBuilderList - Interface in nxopen.annotations
-
Represents a list of objects.
- featureControlFrameDataList() - Method in interface nxopen.annotations.FeatureControlFrameBuilder
-
Returns the feature control frame data list. this method will always return at least two frames. for single feature control frames
(frame type is single frame type) only the first frame is used.
- FeatureControlFrameIndicatorBuilder - Interface in nxopen.annotations
-
- FeatureControlFrameIndicatorBuilder.FcfIndicatorCharacteristic - Class in nxopen.annotations
-
Specifies the characteristic of the FCF indicator
- FeatureControlFrameIndicatorBuilder.FcfIndicatorDirection - Class in nxopen.annotations
-
Specifies the direction of the FCF indicator
- FeatureControlFrameIndicatorBuilder.FcfIndicatorType - Class in nxopen.annotations
-
Specifies the type of FCF indicator
- FeatureControlFrameIndicatorBuilderList - Interface in nxopen.annotations
-
Represents a list of objects.
- featureControlFrameIndicatorList() - Method in interface nxopen.annotations.FeatureControlFrameDataBuilder
-
Returns the feature control frame indicator list.
- featureControlFrameTags - Variable in class nxopen.uf.UFGdt.AnnotationTags
-
- featureCount - Variable in class nxopen.uf.UFMfm.RecognizeHolesData
-
- featureCurves - Variable in class nxopen.uf.UFCurve.AskFeatureCurvesData
-
- featureData() - Method in interface nxopen.features.CustomFeature
-
Returns the custom feature data
License requirements: solid_modeling ("SOLIDS MODELING")
.
- featureData() - Method in interface nxopen.features.CustomFeatureBuilder
-
Returns the custom feature data
License requirements: solid_modeling ("SOLIDS MODELING")
.
- featureDetail() - Method in interface nxopen.cam.InspectionAnalyzeOutputBuilder
-
Returns the feature detail option
License requirements: None.
- FeatureEdgeNodeMethod - Interface in nxopen.cae
-
Represents the output from the feature edge node smart selector method
To obtain an instance of this class use CAE::SmartSelectionManager
.
- FeatureElemEdgeMethod - Interface in nxopen.cae
-
Represents the output from the feature element edge smart selector method
To obtain an instance of this class use CAE::SmartSelectionManager
.
- FeatureElemFaceMethod - Interface in nxopen.cae
-
Represents the output from the feature element face smart selector method
To obtain an instance of this class use CAE::SmartSelectionManager
.
- FeatureElemMethod - Interface in nxopen.cae
-
Represents the output from the feature element smart selector method
To obtain an instance of this class use CAE::SmartSelectionManager
.
- FeatureExtractionBuilder - Interface in nxopen.facet
-
Represents a
FeatureExtractionBuilder
It extracts feature lines or separates regions of different curvature
from a facet body based on the curvature map.
- FeatureExtractionBuilder.InputActions - Class in nxopen.facet
-
Specifies how to handle the input facet bodies.
- featureFilter() - Method in interface nxopen.cam.InspectionPatternFeatureBuilder
-
Returns the feature filter used to filter the list of available features
License requirements: None.
- FeatureGeneralPropertiesBuilder - Interface in nxopen
-
- FeatureGeomBuilder - Interface in nxopen.cam
-
Represents a FeatureGeom Builder
This is an abstract class, and cannot be instantiated.
- FeatureGeomBuilder.MaterialData - Class in nxopen.cam
-
- FeatureGeometry - Interface in nxopen.cam.fbm
-
Represents a feature geometry builder
This is an abstract class and cannot be instantiated.
- FeatureGeometry - Interface in nxopen.cam
-
Represents a Base Geometry Group
To create or edit an instance of this class, use
FeatureGeomBuilder
Created in NX7.5.0
- featureGeometry() - Method in interface nxopen.cam.HoleBossGeometry
-
Returns the sub builder for feature geometry
License requirements: None.
- featureGeometry() - Method in interface nxopen.cam.OptimizeTraverseGroupBuilder
-
Returns the optimize feature geometry
License requirements: cam_base ("CAM BASE")
.
- FeatureGeometry.SequenceDirectionType - Class in nxopen.cam.fbm
-
the direction types .
- FeatureGeometry.SequencePatternType - Class in nxopen.cam.fbm
-
the pattern types .
- FeatureGeometry.SortOrder - Class in nxopen.cam.fbm
-
the optimization types .
- FeatureGeometryGroup - Interface in nxopen.cam
-
- FeatureGeometryGroup.ProcessStatus - Class in nxopen.cam
-
Update status of the feature
- FeatureGroup - Interface in nxopen.features
-
- FeatureGroup.Type - Class in nxopen.features
-
Feature group type.
- FeatureGroupBuilder - Interface in nxopen.cam
-
- featureGrouping() - Method in interface nxopen.cam.FeatureProcessBuilder
-
Returns the way features are grouped in feature processes
License requirements: ug_holemaking ("UG Holemaking")
.
- featureId() - Method in interface nxopen.annotations.FeatureIdBusinessModifierBuilder
-
Returns the feature ID
License requirements: None.
- FeatureIdBusinessModifier - Interface in nxopen.annotations
-
Represents buiness modifier that indicates a featire identification PMI object.
- FeatureIdBusinessModifierBuilder - Interface in nxopen.annotations
-
- FeatureInfo() - Constructor for class nxopen.weld.WeldObjectBuilder.FeatureInfo
-
- FeatureInfo(Feature, boolean) - Constructor for class nxopen.weld.WeldObjectBuilder.FeatureInfo
-
Constructor for the FeatureInfo object.
- FeatureInfo() - Constructor for class nxopen.weld.WeldPointExitBuilder.FeatureInfo
-
- FeatureInfo(Feature, WeldPointExitBuilder.MethodUsed, Feature, boolean) - Constructor for class nxopen.weld.WeldPointExitBuilder.FeatureInfo
-
Constructor for the FeatureInfo object.
- featureInstances - Variable in class nxopen.uf.UFGdt.AskTolFeatInstanceData
-
- FeatureIntersectionEdgesRule - Interface in nxopen
-
Represents a
SelectionIntentRule
that collects the intersection edges of boolean like features.
- featureIset - Variable in class nxopen.uf.UFAssem.IsetArrayData
-
- FeatureList - Interface in nxopen.features
-
Represents a list of objects.
- featureList() - Method in interface nxopen.features.MirrorBuilder
-
Returns the Features to Mirror
License requirements: solid_modeling ("SOLIDS MODELING")
.
- featureList() - Method in interface nxopen.features.PatternFeatureBuilder
-
Returns the Features
License requirements: solid_modeling ("SOLIDS MODELING")
.
- featureList() - Method in interface nxopen.geometricutilities.RenewFeatureBuilder
-
Returns the renew feature list
License requirements: None.
- featureList() - Method in interface nxopen.SuppressByExpressionBuilder
-
Returns the feautre list.
- featureMapperEnabled() - Method in interface nxopen.cam.FeatureRecognitionBuilder
-
Returns the flag indicating if mapping is enabled.
- FeatureMilling - Interface in nxopen.cam
-
Represents a Feature Milling Operation
To create or edit an instance of this class, use
FeatureMillingBuilder
Created in NX7.5.0
- FeatureMillingBuilder - Interface in nxopen.cam
-
- FeatureMillingCutParameters - Interface in nxopen.cam
-
Represents a FeatureMillingCutParameters Builder .
- FeatureMillingCutParameters.CuttingDirectionTypes - Class in nxopen.cam
-
cut direction options .
- featureMode() - Method in interface nxopen.features.shipdesign.ProfileTransitionBuilder
-
Returns the feature mode used to create new Profile Transition features.
- featureName() - Method in interface nxopen.cam.IpwContainmentCurvesBuilder
-
Returns the feature name
License requirements: None.
- featureName() - Method in interface nxopen.FeatureGeneralPropertiesBuilder
-
Returns the feature name.
- featureName() - Method in interface nxopen.features.shipdesign.ManufacturingPreparationBuilder
-
Returns the feature name
License requirements: None.
- featureName() - Method in interface nxopen.features.shipdesign.SteelDistributionBuilder
-
Returns the description
License requirements: None.
- featureName - Variable in class nxopen.uf.UFSmd.SeqOutput
-
- featureName - Variable in class nxopen.uf.UFWave.LinkedFeatureInfo
-
- featureNames - Variable in class nxopen.uf.UFFbmGeom.AskListOfFeatureNamesData
-
- featureNameSuffix() - Method in interface nxopen.features.shipdesign.TransFrameBuilder
-
Returns the suffix name.
- FeatureNodeMethod - Interface in nxopen.cae
-
Represents the output from the feature node smart selector method
To obtain an instance of this class use CAE::SmartSelectionManager
.
- featureObject() - Method in interface nxopen.FeatureGeneralPropertiesBuilder
-
Returns the feature.
- FeatureOffset - Interface in nxopen.geometricutilities
-
Represents a Offset .
- featureOffsetDistance() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns the offset feature distance
License requirements: None.
- featureOpName() - Method in interface nxopen.cam.InspectionPathBuilder
-
Returns the inspection feature operation name
License requirements: None.
- featureOption() - Method in interface nxopen.features.ExtractFaceBuilder
-
Returns the feature option type
License requirements: None.
- featureOption() - Method in interface nxopen.features.MirrorBodyBuilder
-
Returns the feature option type
License requirements: None.
- featureOptions() - Method in interface nxopen.features.ExtrudeBuilder
-
Returns the feature options
License requirements: None.
- featureOptions() - Method in interface nxopen.features.GlobalShapingBuilder
-
Returns the feature options
License requirements: None.
- featureOptions() - Method in interface nxopen.features.RevolveBuilder
-
Returns the feature options
License requirements: None.
- featureOptions() - Method in interface nxopen.features.SweepAlongGuideBuilder
-
Returns the feature options
License requirements: None.
- featureOptions() - Method in interface nxopen.features.VarsweepBuilder
-
Returns the solid versus sheet body type option
License requirements: None.
- FeatureOptions - Interface in nxopen.geometricutilities
-
Represents various options supported on features.
- FeatureOptions.BodyStyle - Class in nxopen.geometricutilities
-
This enum represents the various body types
- FeatureParmsBuilder - Interface in nxopen.features.shipdesign
-
This class is used to create or edit the information shared among all Ship Design features.
- FeatureParmsBuilder.OrientationAngleRuleTypes - Class in nxopen.features.shipdesign
-
Settings to indicate how angles are to be measured.
- featurePatterns - Variable in class nxopen.uf.UFModeling.AskInstancesOfFeatureData
-
- FeaturePointsRule - Interface in nxopen
-
- FeaturePort - Interface in nxopen.routing
-
- FeatureProcessBuilder - Interface in nxopen.cam
-
- FeatureProcessBuilder.CreateFeatureProcessesData - Class in nxopen.cam
-
- FeatureProcessBuilder.FeatureGroupingType - Class in nxopen.cam
-
Determines how features are allocated to feature groups
- FeatureProcessBuilder.FeatureProcessType - Class in nxopen.cam
-
Type of creation
- FeatureProcessBuilder.RecreateFeatureProcessesData - Class in nxopen.cam
-
- FeatureProcessBuilder.TemplateData - Class in nxopen.cam
-
- FeatureProcessBuilderStatus - Interface in nxopen
-
.
- FeatureProcessBuilderStatus.ResultStatus - Class in nxopen
-
Result status enumeration to indicate the result status of feature process creation
- featureprocestemplate - Variable in class nxopen.cam.FeatureProcessBuilder.TemplateData
-
the feature process sub type used
- FeatureProperty - Class in nxopen.features.sheetmetal
-
This is a common enum that comprises of values to be used for various features.
- FeatureRecognitionBuilder - Interface in nxopen.cam
-
- FeatureRecognitionBuilder.GeometrySearch - Class in nxopen.cam
-
the geometry search type
- FeatureRecognitionBuilder.RecognitionEnum - Class in nxopen.cam
-
the type of feature search
- featureReferences() - Method in interface nxopen.features.ReferenceMapperBuilder
-
Returns the Feature References Builder
License requirements: None.
- featureReferences() - Method in interface nxopen.features.ReplaceFeatureBuilder
-
Returns the feature references builder
License requirements: None.
- FeatureReferencesBuilder - Interface in nxopen.features
-
- FeatureReferenceSetBuilder - Interface in nxopen.tooling
-
- FeatureReplayBuilder - Interface in nxopen.features
-
- features() - Method in interface nxopen.BasePart
-
Returns the FeatureCollection instance belonging to this part .
- FEATURES - Static variable in class nxopen.blockstyler.SelectObject.FilterType
-
Filter to select all feature types
- features() - Method in interface nxopen.cam.MachiningFeature
-
Returns the list features
License requirements: None.
- features() - Method in interface nxopen.cam.MachiningFeatureGeom
-
Returns the features
License requirements: None.
- features - Variable in class nxopen.CurveFeatureChainRule.Data
-
Features whose curves are used to create this rule
- features - Variable in class nxopen.CurveFeatureTangentRule.Data
-
Feaures whose tangent curves are used to create this rule
- features - Variable in class nxopen.features.FeatureCollection.CreateIntersectFeatureData
-
Array of boolean features
- features - Variable in class nxopen.features.FeatureCollection.CreateSubtractFeatureData
-
Array of boolean features
- features - Variable in class nxopen.features.FeatureCollection.CreateUniteFeatureData
-
Array of boolean features
- features - Variable in class nxopen.FollowFilletRule.Data
-
Features whose curves are used to create this rule
- features - Variable in class nxopen.Part.RemoveMissingParentsFromEdgeBlendData
-
the edge blend features with missing parents
- FEATURES - Static variable in class nxopen.Selection.SelectionType
-
Filter to select all feature types
- features - Variable in class nxopen.uf.UFModeling.AskAllMembersOfSetData
-
- features - Variable in class nxopen.uf.UFModeling.AskFeaturesOfMirrorSetData
-
- features - Variable in class nxopen.uf.UFModeling.AskOutOfDateFeaturesData
-
- features - Variable in class nxopen.uf.UFModl.ComparePartEntitiesData
-
- features - Variable in class nxopen.uf.UFModl.ComparePartEntitiesData3
-
- features - Variable in class nxopen.uf.UFModl.CreateExtrusion1Data
-
- features - Variable in class nxopen.uf.UFModl.CreateExtrusion2Data
-
- features - Variable in class nxopen.uf.UFModl.CreateExtrusionData
-
- features - Variable in class nxopen.uf.UFModl.CreateExtrusionPath1Data
-
- features - Variable in class nxopen.uf.UFModl.CreateExtrusionPathData
-
- features - Variable in class nxopen.uf.UFModl.CreateRevolution1Data
-
- features - Variable in class nxopen.uf.UFModl.CreateRevolutionData
-
- features - Variable in class nxopen.uf.UFModl.CreateRevolutionDirData
-
- features - Variable in class nxopen.uf.UFModl.CreateTrimmedTube1Data
-
- features - Variable in class nxopen.uf.UFModl.CreateTrimmedTubeData
-
- Features() - Constructor for class nxopen.uf.UFModl.Features
-
- Features(int, Tag[], String) - Constructor for class nxopen.uf.UFModl.Features
-
- features - Variable in class nxopen.uf.UFModlGeneral.AskFeaturesOfExpData
-
- features - Variable in class nxopen.uf.UFModlGeneral.AskFeaturesOfUdfData
-
- features() - Method in interface nxopen.weld.TransformBuilder
-
Returns the weld features to transform
License requirements: None.
- FEATURES_IN_BODY - Static variable in class nxopen.Information.DisplayFeatureType
-
Displays features in body information.
- featureSaveMethod() - Method in interface nxopen.features.StudioXformBuilder
-
- featureSaveMethod() - Method in interface nxopen.features.StudioXformBuilderEx
-
Returns the feature save method
License requirements: None.
- FeaturesBatchOperationBuilder - Interface in nxopen.features.shipdesign
-
Use this to cycle through the assembly components and perform the operation globally on the specified feature type.
- FeaturesBatchOperationBuilder.Types - Class in nxopen.features.shipdesign
-
The option for which kind of operation will be performed.
- FeatureSet - Interface in nxopen.cam.fbm
-
- featureSet() - Method in interface nxopen.features.EditDimensionBuilder
-
Returns the list of features
License requirements: None.
- featureSet() - Method in interface nxopen.features.MirrorFeatureBuilder
-
Returns the Features
License requirements: None.
- featureSet() - Method in interface nxopen.features.subdivision.ExportSubdivisionGeometryBuilder
-
Returns the Feature to export
License requirements: None.
- featureSetTag - Variable in class nxopen.uf.UFProcessAid.IsDatumObjectData
-
- featureSetTag - Variable in class nxopen.uf.UFWeld.IsObjectWeldData
-
- FeatureShellElemMethod - Interface in nxopen.cae
-
Represents the output from the feature shell element smart selector method
To obtain an instance of this class use CAE::SmartSelectionManager
.
- featureSpine() - Method in interface nxopen.geometricutilities.AlongSpineBuilder
-
Returns the Spine set by the owning feature of the law
License requirements: None.
- featuresToGroupType() - Method in interface nxopen.cam.GroupFeatures
-
Returns the features to group enumeration
License requirements: None.
- FeaturesToTagBuilder - Interface in nxopen.features.shipdesign
-
This class is used to add an attribute to profile features that have been modified by
the user to display a 'Metal to Metal' design 'feature'.
- featureSummary() - Method in interface nxopen.cam.InspectionAnalyzeOutputBuilder
-
Returns the feature summary option
License requirements: None.
- featureSuppression() - Method in interface nxopen.ListCreator
-
Returns the m_featureSuppression * - Specifies the feature supression for Defined Level of Detail
License requirements: None.
- featureTag - Variable in class nxopen.uf.UFGexp.CreateAngleData
-
- featureTag - Variable in class nxopen.uf.UFGexp.CreateDistanceData
-
- featureTag - Variable in class nxopen.uf.UFGexp.CreateLengthData
-
- featureTag - Variable in class nxopen.uf.UFModl.DimensionData
-
- featureTag - Variable in class nxopen.uf.UFModlFeatures.CreateSimplifyData
-
- featureTag - Variable in class nxopen.uf.UFSf.CreateIdealizeBodyData
-
- featureTag - Variable in class nxopen.uf.UFSf.CreateIdealizeRegionData
-
- featureTag - Variable in class nxopen.uf.UFSf.IsMidsrfData
-
- featureTag - Variable in class nxopen.uf.UFSf.IsUserdefMidsrfData
-
- featureTag - Variable in class nxopen.uf.UFSmd.PipNodeData
-
- FeatureTeaching - Interface in nxopen.cam
-
- FeatureTeaching.RuleMatchOptionType - Class in nxopen.cam
-
Rule Option types
- featureToTag() - Method in interface nxopen.features.shipdesign.FeaturesToTagBuilder
-
Returns the feature to tag.
- featureType() - Method in interface nxopen.cam.MachiningFeature
-
Returns the feature type of the feature to create
License requirements: None.
- featureType() - Method in interface nxopen.cam.SurfaceRegions
-
Returns the feature type
License requirements: None.
- featureType() - Method in interface nxopen.features.Feature
-
Returns the feature type
License requirements: None.
- featureType() - Method in interface nxopen.features.MeshSurfaceBuilder
-
Returns
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- featureType - Variable in class nxopen.RuleManager.AdoptableTypes
-
- featureTypeEnum() - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder
-
Returns the feature type to be constructed
License requirements: None.
- featureTypeNames - Variable in class nxopen.uf.UFMfm.AskMachiningFeatureTypesData
-
- FeatureUpdateStatus() - Constructor for class nxopen.Part.FeatureUpdateStatus
-
- FeatureUpdateStatus(Feature, String, String) - Constructor for class nxopen.Part.FeatureUpdateStatus
-
Constructor for the FeatureUpdateStatus object.
- FEB - Static variable in class nxopen.DateItemBuilder.MonthOfYear
-
- feed() - Method in interface nxopen.cam.BoundaryTurnVariableStockSet
-
Returns the feed rate toggle
License requirements: None.
- FEED_PER_TOOTH - Static variable in class nxopen.cam.FeedsBuilder.RecalcuateBasedOn
-
feed per tooth
- FEED_UNIT_LAST_ELEMENT - Static variable in class nxopen.uf.UFPath.FeedUnit
-
- FEED_UNIT_NONE - Static variable in class nxopen.uf.UFDrpos.FeedUnit
-
- FEED_UNIT_NONE - Static variable in class nxopen.uf.UFPath.FeedUnit
-
- FEED_UNIT_PER_MIN - Static variable in class nxopen.uf.UFDrpos.FeedUnit
-
- FEED_UNIT_PER_MINUTE - Static variable in class nxopen.uf.UFPath.FeedUnit
-
- FEED_UNIT_PER_REV - Static variable in class nxopen.uf.UFDrpos.FeedUnit
-
- FEED_UNIT_PER_REVOLUTION - Static variable in class nxopen.uf.UFPath.FeedUnit
-
- FEED_USE_CUSTOM - Static variable in class nxopen.uf.UFDrpos.FeedUse
-
- FEED_USE_DEFAULT - Static variable in class nxopen.uf.UFDrpos.FeedUse
-
- feedApproachBuilder() - Method in interface nxopen.cam.FeedsBuilder
-
Returns the feed_approach builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
- feedApproachBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
-
Returns the feed_approach builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
- feedApproachBuilder() - Method in interface nxopen.cam.FeedsWedmBuilder
-
Returns the feed_approach builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
- feedbackMessage(UFVariant, String, String) - Method in interface nxopen.uf.UFSim
-
- feedbackPoint() - Method in interface nxopen.mechatronics.AngularLimitJointBuilder
-
Returns the position of visual feedback point.
- feedbackPoint() - Method in interface nxopen.mechatronics.AngularSpringJointBuilder
-
Returns the position of visual feedback point.
- feedbackPoint() - Method in interface nxopen.mechatronics.FixedJointBuilder
-
Returns the position of visual feedback point.
- feedbackPoint() - Method in interface nxopen.mechatronics.SlidingJointBuilder
-
Returns the position of visual feedback point.
- feedCrossoverBuilder() - Method in interface nxopen.cam.FeedsBuilder
-
Returns the feed_crossover builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
- feedCutBuilder() - Method in interface nxopen.cam.DriveChainItemBuilder
-
Returns the feed rate builder
License requirements: cam_base ("CAM BASE")
.
- feedCutBuilder() - Method in interface nxopen.cam.FeedsBuilder
-
Returns the feed_cut builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
- feedCutBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
-
Returns the feed_cut builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
- feedCutBuilder() - Method in interface nxopen.cam.FeedsWedmBuilder
-
Returns the feed_cut builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
- feedDepartureBuilder() - Method in interface nxopen.cam.FeedsBuilder
-
Returns the feed_departure builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
- feedDepartureBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
-
Returns the feed_departure builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
- feedDepartureBuilder() - Method in interface nxopen.cam.FeedsWedmBuilder
-
Returns the feed_departure builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
- feedDisplayFlag() - Method in interface nxopen.cam.DisplayPaint
-
Returns the feed display flag
License requirements: None.
- feedDisplayFlag() - Method in interface nxopen.cam.OperationDisplayOptionsBuilder
-
Returns the feed display flag
License requirements: None.
- feedEngageBuilder() - Method in interface nxopen.cam.FeedsBuilder
-
Returns the feed_engage builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
- feedEngageBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
-
Returns the feed_engage builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
- feedEngageBuilder() - Method in interface nxopen.cam.FeedsWedmBuilder
-
Returns the feed_engage builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
- feedFactor - Variable in class nxopen.cam.CamOperationCircularMotionDataType
-
- feedFactor - Variable in class nxopen.cam.CamOperationHelicalMotionDataType
-
- feedFactor - Variable in class nxopen.cam.CamOperationLinearMotionDataType
-
- feedFirstCutBuilder() - Method in interface nxopen.cam.FeedsBuilder
-
Returns the feed_first_cut builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
- feedFirstCutBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
-
Returns the feed_first_cut builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
- feedFirstCutBuilder() - Method in interface nxopen.cam.FeedsWedmBuilder
-
Returns the feed_first_cut builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
- FeEdgesLocation - Interface in nxopen.cae.connections
-
Location interface.
- feedIn() - Method in interface nxopen.cam.TurnRoughFinishTestCut
-
Returns the test cut feed in
License requirements: None.
- feedInAngle() - Method in interface nxopen.cam.TurnRoughFinishTestCut
-
Returns the test cut feed in angle
License requirements: None.
- feedInLength() - Method in interface nxopen.cam.TurnRoughFinishTestCut
-
Returns the test cut feed in length
License requirements: None.
- feedLastCutBuilder() - Method in interface nxopen.cam.FeedsBuilder
-
Returns the feed_last_cut builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
- feedMaxApproachLengthBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
-
Returns the feed_max_approach_length builder (inheritable Double)
License requirements: cam_base ("CAM BASE")
.
- feedMaxApproachLengthFlagBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
-
Returns the feed_max_approach_length_flag builder (inheritable Int)
License requirements: cam_base ("CAM BASE")
.
- feedMinAccelerateDecelerateLengthBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
-
Returns the feed_min_accelerate_decelerate_length builder (inheritable Double)
License requirements: cam_base ("CAM BASE")
.
- feedMinAccelerateDecelerateLengthFlagBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
-
Returns the feed_min_accelerate_decelerate_length_flag builder (inheritable Int)
License requirements: cam_base ("CAM BASE")
.
- feedOnShortMoves() - Method in interface nxopen.cam.MaxCutTraverse
-
Returns the feed on short moves
License requirements: None.
- feedOut() - Method in interface nxopen.cam.TurnRoughFinishTestCut
-
Returns the test cut feed out
License requirements: None.
- feedOutAngle() - Method in interface nxopen.cam.TurnRoughFinishTestCut
-
Returns the test cut feed out angle
License requirements: None.
- feedOutLength() - Method in interface nxopen.cam.TurnRoughFinishTestCut
-
Returns the test cut feed out length
License requirements: None.
- feedPerToothBuilder() - Method in interface nxopen.cam.FeedsBuilder
-
Returns the feed_per_tooth builder (inheritable Double)
License requirements: cam_base ("CAM BASE")
.
- feedPerToothBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
-
Returns the feed_per_tooth builder (inheritable Double)
License requirements: cam_base ("CAM BASE")
.
- feedRapidBuilder() - Method in interface nxopen.cam.FeedsBuilder
-
Returns the feed_rapid builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
- feedRapidBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
-
Returns the feed_rapid builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
- feedRapidBuilder() - Method in interface nxopen.cam.FeedsWedmBuilder
-
Returns the feed_rapid builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
- feedRapidOutput() - Method in interface nxopen.cam.FeedsBuilder
-
Returns the feed rapid output builder (inheritable Enum)
License requirements: cam_base ("CAM BASE")
.
- feedRapidOutput() - Method in interface nxopen.cam.FeedsTurnBuilder
-
Returns the feed rapid output builder (inheritable Enum)
License requirements: cam_base ("CAM BASE")
.
- FeedRapidOutputMode - Class in nxopen.cam
-
The type for rapid feed output mode .
- feedrate - Variable in class nxopen.cam.CamOperationCircularMotionDataType
-
- feedrate - Variable in class nxopen.cam.CamOperationHelicalMotionDataType
-
- feedrate - Variable in class nxopen.cam.CamOperationLinearMotionDataType
-
- feedRate() - Method in interface nxopen.cam.MoveBuilder
-
Returns the feed rate
License requirements: None.
- FEEDRATE_MODE_LAST_ELEMENT - Static variable in class nxopen.uf.UFPath.FeedrateMode
-
- FEEDRATE_OUTPUT_INVERS - Static variable in class nxopen.uf.UFPath.FeedrateMode
-
- FEEDRATE_OUTPUT_IPM - Static variable in class nxopen.uf.UFPath.FeedrateMode
-
- FEEDRATE_OUTPUT_IPR - Static variable in class nxopen.uf.UFPath.FeedrateMode
-
- FEEDRATE_OUTPUT_MMPM - Static variable in class nxopen.uf.UFPath.FeedrateMode
-
- FEEDRATE_OUTPUT_MMPR - Static variable in class nxopen.uf.UFPath.FeedrateMode
-
- FEEDRATE_OUTPUT_MODE_NONE - Static variable in class nxopen.uf.UFPath.FeedrateMode
-
- FEEDRATE_OUTPUT_OFF - Static variable in class nxopen.uf.UFPath.FeedrateMode
-
- FEEDRATE_UNIT_NONE - Static variable in class nxopen.uf.UFCam.FeedrateUnit
-
- FEEDRATE_UNIT_PER_MINUTE - Static variable in class nxopen.uf.UFCam.FeedrateUnit
-
- FEEDRATE_UNIT_PER_REVOLUTION - Static variable in class nxopen.uf.UFCam.FeedrateUnit
-
- feedrateAccelerateBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
-
Returns the feedrate_accelerate builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
- feedrateAccelerateLengthBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
-
Returns the feedrate_accelerate_length builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
- feedrateCircCcwBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
-
Returns the feedrate_circ_ccw builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
- feedrateCircCwBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
-
Returns the feedrate_circ_cw builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
- feedrateCleanupCircCcwBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
-
Returns the feedrate_cleanup_circ_ccw builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
- feedrateCleanupCircCwBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
-
Returns the feedrate_cleanup_circ_cw builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
- feedrateCleanupCutBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
-
Returns the feedrate_cleanup_cut builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
- feedrateCleanupDiameterBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
-
Returns the feedrate_cleanup_diameter builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
- feedrateCleanupFaceBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
-
Returns the feedrate_cleanup_face builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
- feedrateCleanupLinearBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
-
Returns the feedrate_cleanup_linear builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
- feedrateClearBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
-
Returns the feedrate_clear builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
- FeedRateData() - Constructor for class nxopen.cam.CAMObject.FeedRateData
-
- FeedrateData() - Constructor for class nxopen.cam.PathLinearMotion.FeedrateData
-
- feedrateDecelerateBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
-
Returns the feedrate_decelerate builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
- feedrateDecelerateLengthBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
-
Returns the feedrate_decelerate_length builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
- feedrateDiameterBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
-
Returns the feedrate_diameter builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
- feedrateFaceBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
-
Returns the feedrate_face builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
- feedrateFinishAccelerateBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
-
Returns the feedrate_finish_accelerate builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
- feedrateFinishAccelerateLengthBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
-
Returns the feedrate_finish_accelerate_length builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
- feedrateFinishDecelerateBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
-
Returns the feedrate_finish_decelerate builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
- feedrateFinishDecelerateLengthBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
-
Returns the feedrate_finish_decelerate_length builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
- feedrateFinishRampInBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
-
Returns the feedrate_finish_ramp_in builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
- feedrateFinishRampLevelBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
-
Returns the feedrate_finish_ramp_level builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
- feedrateFinishRampOutBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
-
Returns the feedrate_finish_ramp_out builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
- feedrateFlag() - Method in interface nxopen.cam.DriveChainItemBuilder
-
Returns the feed rate flag
License requirements: cam_base ("CAM BASE")
.
- feedrateLinearBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
-
Returns the feedrate_linear builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
- feedrateProfileCutBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
-
Returns the feedrate_profile_cut builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
- feedrateRampInBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
-
Returns the feedrate_ramp_in builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
- feedrateRampLevelBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
-
Returns the feedrate_ramp_level builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
- feedrateRampOutBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
-
Returns the feedrate_ramp_out builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
- feedRateRange() - Method in interface nxopen.cam.FeedsOptimizationData
-
Returns the feed rate range
License requirements: None.
- feedrateRoughLastCutBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
-
Returns the feedrate_rough_last_cut builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
- feedrateRoughLastCutForEntirePassTogBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
-
Returns the feedrate_rough_last_cut_for_entire_pass_tog builder (inheritable Int)
License requirements: cam_base ("CAM BASE")
.
- feedratetype - Variable in class nxopen.cam.TurnAvoidancePathPointsBuilder.PointData
-
the feedrate Type
- feedratetype - Variable in class nxopen.cam.TurnAvoidancePathPointsBuilder.PointListData
-
the feedrate Type
- FeedRateUnit - Class in nxopen.cam
-
The unit of feed rate (please cf.
- feedrateUnit - Variable in class nxopen.uf.UFCambnd.AppData
-
- feedrateUnit - Variable in class nxopen.uf.UFCamgeom.AppData
-
- feedrateValue - Variable in class nxopen.uf.UFCambnd.AppData
-
- feedrateValue - Variable in class nxopen.uf.UFCamgeom.AppData
-
- feedRetractBuilder() - Method in interface nxopen.cam.FeedsBuilder
-
Returns the feed_retract builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
- feedRetractBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
-
Returns the feed_retract builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
- feedRetractBuilder() - Method in interface nxopen.cam.FeedsWedmBuilder
-
Returns the feed_retract builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
- feedReturnBuilder() - Method in interface nxopen.cam.FeedsBuilder
-
Returns the feed_return builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
- feedReturnBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
-
Returns the feed_return builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
- feedReturnBuilder() - Method in interface nxopen.cam.FeedsWedmBuilder
-
Returns the feed_return builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
- feeds() - Method in interface nxopen.cam.LaserMethod
-
Returns the feeds
License requirements: None.
- feeds() - Method in interface nxopen.cam.LaserTeachMode
-
Returns the feeds and speeds
License requirements: None.
- feeds() - Method in interface nxopen.cam.TeachmodeProfileMoveBuilder
-
Returns the feeds builder
License requirements: None.
- feedsBuilder() - Method in interface nxopen.cam.DrillMethodBuilder
-
Returns the feeds builder
License requirements: cam_base ("CAM BASE")
.
- FeedsBuilder - Interface in nxopen.cam
-
Represents a feeds Builder .
- feedsBuilder() - Method in interface nxopen.cam.GmcOpBuilder
-
Returns the feeds and speeds builder
License requirements: None.
- feedsBuilder() - Method in interface nxopen.cam.HoleMachiningBuilder
-
Returns the feeds and speeds builder
License requirements: None.
- feedsBuilder() - Method in interface nxopen.cam.HoleMakingBuilder
-
Returns the feeds and speeds builder
License requirements: None.
- feedsBuilder() - Method in interface nxopen.cam.LatheMachineControlBuilder
-
Returns the feeds and speeds builder
License requirements: cam_base ("CAM BASE")
.
- feedsBuilder() - Method in interface nxopen.cam.MillMachineControlBuilder
-
Returns the feeds and speeds builder
License requirements: cam_base ("CAM BASE")
.
- feedsBuilder() - Method in interface nxopen.cam.MillMethodBuilder
-
Returns the feeds builder
License requirements: cam_base ("CAM BASE")
.
- feedsBuilder() - Method in interface nxopen.cam.MillOperationBuilder
-
Returns the feeds and speeds builder
License requirements: None.
- feedsBuilder() - Method in interface nxopen.cam.MillToolProbingBuilder
-
Returns the feeds and speeds builder
License requirements: None.
- feedsBuilder() - Method in interface nxopen.cam.ObjectsFeedsBuilder
-
Returns the feed builder
License requirements: cam_base ("CAM BASE")
.
- feedsBuilder() - Method in interface nxopen.cam.TurningOperationBuilder
-
Returns the feeds and speeds builder
License requirements: None.
- feedsBuilder() - Method in interface nxopen.cam.TurnMethodBuilder
-
Returns the feeds builder
License requirements: cam_base ("CAM BASE")
.
- feedsBuilder() - Method in interface nxopen.cam.TurnPartProbingBuilder
-
Returns the feeds and speeds builder
License requirements: None.
- feedsBuilder() - Method in interface nxopen.cam.TurnToolProbingBuilder
-
Returns the feeds and speeds builder
License requirements: None.
- feedsBuilder() - Method in interface nxopen.cam.WedmMethodBuilder
-
Returns the feeds builder
License requirements: cam_base ("CAM BASE")
.
- feedsBuilder() - Method in interface nxopen.cam.WedmOperationBuilder
-
Returns the feeds builder
License requirements: cam_base ("CAM BASE")
.
- feedsBuilder() - Method in interface nxopen.cam.WedmUserDefinedBuilder
-
Returns the feeds builder
License requirements: cam_base ("CAM BASE")
.
- FeedsBuilder.RecalcuateBasedOn - Class in nxopen.cam
-
The recalculation based on attribute .
- feedSideCutBuilder() - Method in interface nxopen.cam.FeedsBuilder
-
Returns the feed_side_cut builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
- feedSideCutBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
-
Returns the feed_side_cut builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
- feedSideCutBuilder() - Method in interface nxopen.cam.FeedsWedmBuilder
-
Returns the feed_side_cut builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
- feedsOptimizationData() - Method in interface nxopen.cam.FeedsBuilder
-
Returns the feeds optimize data
License requirements: cam_base ("CAM BASE")
.
- FeedsOptimizationData - Interface in nxopen.cam
-
- feedsOptimizationData() - Method in interface nxopen.cam.FeedsOptimizeBuilder
-
Returns the feeds optimization data
License requirements: cam_base ("CAM BASE")
.
- FeedsOptimizationData.FeedRateRangeType - Class in nxopen.cam
-
The Feed Rate Range options
- FeedsOptimizeBuilder - Interface in nxopen.cam
-
Represents a
FeedsOptimizeBuilder
a "commit" of this object will perform the Feed Rate Optimization.
- FeedStatusData - Class in nxopen.cam
-
The data for CamUI_FeedStatusComp .
- FeedStatusData() - Constructor for class nxopen.cam.FeedStatusData
-
- FeedStatusData(double, FeedRateUnit, Inheritance) - Constructor for class nxopen.cam.FeedStatusData
-
Constructor for the FeedStatusData object.
- feedStepoverBuilder() - Method in interface nxopen.cam.FeedsBuilder
-
Returns the feed_stepover builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
- feedStepoverBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
-
Returns the feed_stepover builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
- feedStepoverBuilder() - Method in interface nxopen.cam.FeedsWedmBuilder
-
Returns the feed_stepover builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
- FeedsTurnBuilder - Interface in nxopen.cam
-
Represents a turning feeds Builder .
- FeedsWedmBuilder - Interface in nxopen.cam
-
Represents a wedm feeds Builder .
- FeedsWedmBuilder.OutputTypes - Class in nxopen.cam
-
the feed rate output mode .
- feedTraversalBuilder() - Method in interface nxopen.cam.FeedsBuilder
-
Returns the feed_traversal builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
- feedTraversalBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
-
Returns the feed_traversal builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
- feedTraversalBuilder() - Method in interface nxopen.cam.FeedsWedmBuilder
-
Returns the feed_traversal builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
- feedType() - Method in interface nxopen.cam.MoveBuilder
-
Returns the feed type
License requirements: None.
- feedUnit() - Method in interface nxopen.cam.BoundaryMemberSetPlanarMill
-
Returns the feed rate unit
License requirements: None.
- feedUnit() - Method in interface nxopen.cam.BoundaryMillingMemberSet
-
Returns the feed rate unit
License requirements: None.
- feedUnit() - Method in interface nxopen.cam.BoundaryMillingSet
-
Returns the feed rate unit
License requirements: None.
- feedUnit() - Method in interface nxopen.cam.BoundarySetPlanarMill
-
Returns the feed rate unit
License requirements: None.
- feedUnit() - Method in interface nxopen.cam.BoundaryTurnMemberCorner
-
Returns the feed rate unit
License requirements: None.
- feedUnit() - Method in interface nxopen.cam.BoundaryTurnMemberFeed
-
Returns the feed rate unit
License requirements: None.
- feedUnit() - Method in interface nxopen.cam.BoundaryTurnSet
-
Returns the feed rate unit
License requirements: None.
- feedUnit() - Method in interface nxopen.cam.BoundaryTurnVariableStockSet
-
Returns the feed rate unit
License requirements: None.
- feedUnit() - Method in interface nxopen.cam.GeometrySet
-
Returns the feed rate unit
License requirements: None.
- feedUnit() - Method in interface nxopen.cam.MoveBuilder
-
Returns the feed unit
License requirements: None.
- feedunit - Variable in class nxopen.cam.PathLinearMotion.FeedrateData
-
- feedUnit() - Method in interface nxopen.cam.SurfaceDriveGeometrySet
-
Returns the feed rate unit
License requirements: None.
- feedUnit - Variable in class nxopen.uf.UFPath.CircularMotion
-
- feedUnit - Variable in class nxopen.uf.UFPath.HelicalMotion
-
- feedUnit - Variable in class nxopen.uf.UFPath.LinearMotion
-
- feedValue() - Method in interface nxopen.cam.BoundaryMemberSetPlanarMill
-
Returns the feed rate value
License requirements: None.
- feedValue() - Method in interface nxopen.cam.BoundaryMillingMemberSet
-
Returns the feed rate value
License requirements: None.
- feedValue() - Method in interface nxopen.cam.BoundaryMillingSet
-
Returns the feed rate value
License requirements: None.
- feedValue() - Method in interface nxopen.cam.BoundarySetPlanarMill
-
Returns the feed rate value
License requirements: None.
- feedValue() - Method in interface nxopen.cam.BoundaryTurnMemberCorner
-
Returns the feed rate value
License requirements: None.
- feedValue() - Method in interface nxopen.cam.BoundaryTurnMemberFeed
-
Returns the feed rate value
License requirements: None.
- feedValue() - Method in interface nxopen.cam.BoundaryTurnSet
-
Returns the feed rate value
License requirements: None.
- feedValue() - Method in interface nxopen.cam.BoundaryTurnVariableStockSet
-
Returns the feed rate value
License requirements: None.
- feedValue() - Method in interface nxopen.cam.GeometrySet
-
Returns the feed rate value
License requirements: None.
- feedvalue - Variable in class nxopen.cam.PathLinearMotion.FeedrateData
-
- feedValue() - Method in interface nxopen.cam.SurfaceDriveGeometrySet
-
Returns the feed rate value
License requirements: None.
- feedValue - Variable in class nxopen.uf.UFPath.CircularMotion
-
- feedValue - Variable in class nxopen.uf.UFPath.HelicalMotion
-
- feedValue - Variable in class nxopen.uf.UFPath.LinearMotion
-
- FEElemEdge - Interface in nxopen.cae
-
Represents a Finite Element Edge which can be shared by more that one element.
- FEElemEdge.ElementsAndEdgeIdsData - Class in nxopen.cae
-
- FEElement - Interface in nxopen.cae
-
Represents a Finite Element.
- feElementEdge() - Method in interface nxopen.cae.qualityaudit.FreeEdgeDistanceResult
-
Returns the FE edge (if present).
- FEElementLabelMap - Interface in nxopen.cae
-
Represents a Elementl Label to an
FEElement
map, it can be used to quickly convert
a
FEElement
label, which is generally used in solver input files and results
files, in the element object itself
FEElement
This is an abstract class
Created in NX6.0.2
- feelementLabelMap() - Method in interface nxopen.cae.IFEModel
-
Returns a
FEElement
Label to
FEElement
Map
for this Interface to the Finite Element Model.
- FEElemFace - Interface in nxopen.cae
-
Represents a Finite Element Face.
- FEElemFace.ElementsAndFaceIdsData - Class in nxopen.cae
-
- FEET - Static variable in class nxopen.cam.InspectionCmmCommandBuilder.LinearUnitsOptions
-
Use feat
- feetInchFractionForDimensionGreaterThan() - Method in interface nxopen.drafting.AutomationPreferencesBuilder
-
Returns the feet inch fraction for dimension greater than
License requirements: None.
- FEM - Static variable in class nxopen.pdm.CaeCloneManager.CloneOption
-
Deprecated.
- FEM_IDEALIZED_TYPE - Static variable in class nxopen.tooling.ToolingCloneparttype
-
CAE Idealized part for .fem
- FEM_PART_NEW_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- FEM_PART_OPEN_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- FEM_SAVEAS_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- FEM_TYPE - Static variable in class nxopen.tooling.ToolingCloneparttype
-
CAE .fem part
- FEM_VALUE_ACTION - Static variable in class nxopen.uf.UFSf.FemValueType
-
- FEM_VALUE_AXIS_VAL_TYPE - Static variable in class nxopen.uf.UFSf.FemValueType
-
- FEM_VALUE_BNDCOND - Static variable in class nxopen.uf.UFSf.FemValueType
-
- FEM_VALUE_BOOL - Static variable in class nxopen.uf.UFSf.FemValueType
-
- FEM_VALUE_CATALOG - Static variable in class nxopen.uf.UFSf.FemValueType
-
- FEM_VALUE_COMPLEX_SCALAR_FIELD - Static variable in class nxopen.uf.UFSf.FemValueType
-
- FEM_VALUE_COMPLEX_VECTOR_FIELD - Static variable in class nxopen.uf.UFSf.FemValueType
-
- FEM_VALUE_COMPONENTREF - Static variable in class nxopen.uf.UFSf.FemValueType
-
- FEM_VALUE_COMPONENTREF_ARRAY - Static variable in class nxopen.uf.UFSf.FemValueType
-
- FEM_VALUE_COORD - Static variable in class nxopen.uf.UFSf.FemValueType
-
- FEM_VALUE_DIRPATH_VAL_TYPE - Static variable in class nxopen.uf.UFSf.FemValueType
-
- FEM_VALUE_DOF_VAL_TYPE - Static variable in class nxopen.uf.UFSf.FemValueType
-
- FEM_VALUE_DOFSET_REF - Static variable in class nxopen.uf.UFSf.FemValueType
-
- FEM_VALUE_EDGES_ON_FACE - Static variable in class nxopen.uf.UFSf.FemValueType
-
- FEM_VALUE_ENUM - Static variable in class nxopen.uf.UFSf.FemValueType
-
- FEM_VALUE_EXT_MENU - Static variable in class nxopen.uf.UFSf.FemValueType
-
- FEM_VALUE_FIELD_VAL_TYPE - Static variable in class nxopen.uf.UFSf.FemValueType
-
- FEM_VALUE_FILENAME_VAL_TYPE - Static variable in class nxopen.uf.UFSf.FemValueType
-
- FEM_VALUE_GENERAL_FIELD - Static variable in class nxopen.uf.UFSf.FemValueType
-
- FEM_VALUE_GROUPREF - Static variable in class nxopen.uf.UFSf.FemValueType
-
- FEM_VALUE_GROUPREF_ARRAY - Static variable in class nxopen.uf.UFSf.FemValueType
-
- FEM_VALUE_IMAGE_VAL_TYPE - Static variable in class nxopen.uf.UFSf.FemValueType
-
- FEM_VALUE_INT - Static variable in class nxopen.uf.UFSf.FemValueType
-
- FEM_VALUE_INT_ARRAY - Static variable in class nxopen.uf.UFSf.FemValueType
-
- FEM_VALUE_LBCREF - Static variable in class nxopen.uf.UFSf.FemValueType
-
- FEM_VALUE_LBCREF_ARRAY - Static variable in class nxopen.uf.UFSf.FemValueType
-
- FEM_VALUE_LOAD - Static variable in class nxopen.uf.UFSf.FemValueType
-
- FEM_VALUE_MATERIAL - Static variable in class nxopen.uf.UFSf.FemValueType
-
- FEM_VALUE_MATRIX - Static variable in class nxopen.uf.UFSf.FemValueType
-
- FEM_VALUE_MULTI_STRING - Static variable in class nxopen.uf.UFSf.FemValueType
-
- FEM_VALUE_MULTI_STRING_ITI - Static variable in class nxopen.uf.UFSf.FemValueType
-
- FEM_VALUE_NIL - Static variable in class nxopen.uf.UFSf.FemValueType
-
- FEM_VALUE_PLYMAT_VAL_TYPE - Static variable in class nxopen.uf.UFSf.FemValueType
-
- FEM_VALUE_POINT_ARRAY_VAL_TYPE - Static variable in class nxopen.uf.UFSf.FemValueType
-
- FEM_VALUE_POINT_VAL_TYPE - Static variable in class nxopen.uf.UFSf.FemValueType
-
- FEM_VALUE_PPT_ARRAY - Static variable in class nxopen.uf.UFSf.FemValueType
-
- FEM_VALUE_PPT_VAL_TYPE - Static variable in class nxopen.uf.UFSf.FemValueType
-
- FEM_VALUE_REGION - Static variable in class nxopen.uf.UFSf.FemValueType
-
- FEM_VALUE_SCALAR - Static variable in class nxopen.uf.UFSf.FemValueType
-
- FEM_VALUE_SCALAR_ARRAY - Static variable in class nxopen.uf.UFSf.FemValueType
-
- FEM_VALUE_SCALAR_FIELD - Static variable in class nxopen.uf.UFSf.FemValueType
-
- FEM_VALUE_SCALAR_FIELD_TABLE - Static variable in class nxopen.uf.UFSf.FemValueType
-
- FEM_VALUE_SECTION - Static variable in class nxopen.uf.UFSf.FemValueType
-
- FEM_VALUE_SECTION_OFFSET - Static variable in class nxopen.uf.UFSf.FemValueType
-
- FEM_VALUE_SECTION_ORIENT - Static variable in class nxopen.uf.UFSf.FemValueType
-
- FEM_VALUE_SECTION_REF - Static variable in class nxopen.uf.UFSf.FemValueType
-
- FEM_VALUE_SELECTREF - Static variable in class nxopen.uf.UFSf.FemValueType
-
- FEM_VALUE_SOLUTIONREF - Static variable in class nxopen.uf.UFSf.FemValueType
-
- FEM_VALUE_SOLUTIONSTEPREF - Static variable in class nxopen.uf.UFSf.FemValueType
-
- FEM_VALUE_SOLVER_DRIVEN_STRING_ARRAY - Static variable in class nxopen.uf.UFSf.FemValueType
-
- FEM_VALUE_SSMO_ARRAY - Static variable in class nxopen.uf.UFSf.FemValueType
-
- FEM_VALUE_SSMO_VAL_TYPE - Static variable in class nxopen.uf.UFSf.FemValueType
-
- FEM_VALUE_TABLE - Static variable in class nxopen.uf.UFSf.FemValueType
-
- FEM_VALUE_TARGETSET - Static variable in class nxopen.uf.UFSf.FemValueType
-
- FEM_VALUE_TEXT - Static variable in class nxopen.uf.UFSf.FemValueType
-
- FEM_VALUE_TIME - Static variable in class nxopen.uf.UFSf.FemValueType
-
- FEM_VALUE_VECTOR - Static variable in class nxopen.uf.UFSf.FemValueType
-
- FEM_VALUE_VECTOR_FIELD - Static variable in class nxopen.uf.UFSf.FemValueType
-
- FEMALE - Static variable in class nxopen.HumanData.GenderType
-
- FEMALE - Static variable in class nxopen.HumanHandsDialogBuilder.GenderType
-
- femaleDepthType() - Method in interface nxopen.die.DrawBeadBuilder
-
Returns the method used to calculate the female depth.
- femaleDepthValue() - Method in interface nxopen.die.DrawBeadBuilder
-
Returns the expression containing the female depth value.
- femaleFaceAttribute() - Method in interface nxopen.die.DrawBeadBuilder
-
Returns the attribute definition to be applied to the faces of the female bead sheet body.
- femaleLeftRadius() - Method in interface nxopen.die.DrawBeadSegmentBuilder
-
Returns the expression containing the female left radius value.
- femaleRightRadius() - Method in interface nxopen.die.DrawBeadSegmentBuilder
-
Returns the expression containing the female right radius value.
- femaleSheetAttribute() - Method in interface nxopen.die.DrawBeadBuilder
-
Returns the attribute definition to be applied to the female bead sheet body.
- femaleWidthType() - Method in interface nxopen.die.DrawBeadBuilder
-
Returns the method used to calculate the female width.
- femaleWidthValue() - Method in interface nxopen.die.DrawBeadBuilder
-
Returns the expression containing the female width value.
- femAskCadPart(Tag) - Method in interface nxopen.uf.UFSf
-
- FemCreationOptions - Interface in nxopen.cae
-
Represents the FEM creation options to be used when a FEM part is created
To create a new instance of this class, use
FemPart.newFemCreationOptions()
Created in NX11.0.0
- FemCreationOptions.UseBodiesOption - Class in nxopen.cae
-
Used to specify the option of specifying bodies to use from the CAD Part while creating
FemPart
.
- femGeometrySaveOption() - Method in interface nxopen.cae.responsesimulation.RSEventOutputSetting
-
Returns the option to save FEM information with evaluation results.
- femObjectPrependName - Variable in class nxopen.cae.FEModel.IdSpecificationObject
-
String to prepend to fem object names such as element collector, material and section
- FEModel - Interface in nxopen.cae
-
This class represents a Finite Element Model.
- femodel() - Method in interface nxopen.cae.SimSimulation
-
Returns the FEModelOccurrence
FEModelOccurrence
associated with the simulation object
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
Created in NX5.0.0
- FEModel.IdSpecificationObject - Class in nxopen.cae
-
- FEModelOccAttribute - Interface in nxopen.cae
-
This class represents an Interface to the Finite Element Model Attributes.
- FEModelOccAttribute.AltRepDisplayStyle - Class in nxopen.cae
-
Represents the display style when in alt rep
- FEModelOccAttribute.AltRepLengthUnitType - Class in nxopen.cae
-
Represents the length units types when in alt rep
- FEModelOccAttribute.AltRepMassUnitType - Class in nxopen.cae
-
Represents the mass units types when in alt rep
- FEModelOccAttribute.RepType - Class in nxopen.cae
-
Represents the FemOcc representation type
- FEModelOccurrence - Interface in nxopen.cae
-
This class represents a Finite Element Model Occurrence.
- FEModelOccurrence.LabelOffsetsData - Class in nxopen.cae
-
- FEModelOccurrence.OccEntityLabelOffsetsData - Class in nxopen.cae
-
- FemPart - Interface in nxopen.cae
-
Represents an NX part of type .fem.
- femPart() - Method in interface nxopen.cae.SimPart
-
Returns the fem part associated with the sim part
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- FemPart.GeometryData - Class in nxopen.cae
-
- FemPart.MeshPreferencesData - Class in nxopen.cae
-
- FemPart.UseBodiesOption - Class in nxopen.cae
-
Used to specify the option of specifying bodies to use from the CAD Part while creating the
FemPart
object.
- FemSignalProcessingApplication - Interface in nxopen.cae
-
- FemSignalProcessingSignalAttributes - Interface in nxopen.cae
-
- FemSignalProcessingSignalAttributes.AcousticalWeightings - Class in nxopen.cae
-
This enum defines the acoustical weightings
- FemSignalProcessingSignalAttributes.CorrectionModes - Class in nxopen.cae
-
This enum defines the correction modes
- FemSignalProcessingSignalAttributes.SpectrumScalings - Class in nxopen.cae
-
This enum defines the spectrum scaling
- FemSynchronizeOptions - Interface in nxopen.cae
-
Represents the synchronize options to be used when a FEM part is created
These options will be used to synchronize the specified entities from the
master CAD part file to the FEM part file
To create a new instance of this class, use
FemPart.newFemSynchronizeOptions()
Created in NX4.0.0
- FENCE - Static variable in class nxopen.linedesigner.DBNode.NodeType
-
- FENode - Interface in nxopen.cae
-
Represents a Finite Element Node.
- FENodeLabelMap - Interface in nxopen.cae
-
Represents a Nodel Label to an
FENode
map, it can be used to quickly convert
a
FENode
label, which is generally used in solver input files and results
files, in the node object itself
FENode
This is an abstract class
Created in NX6.0.2
- fenodeLabelMap() - Method in interface nxopen.cae.IFEModel
-
Returns a
FENode
Label to
FENode
Map for this
Interface to the Finite Element Model.
- feResults() - Method in interface nxopen.cae.DurSpecialistSuperpositionEventBuilder
-
Returns the FE results.
- fetchWeldPointsInScope() - Method in interface nxopen.tooldesigner.AssignWeldsBuilder
-
Fetch Weld Points In Scope
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- fetchWeldPointsInScope() - Method in interface nxopen.tooldesigner.SelectWeldsBuilder
-
Fetch Weld Points In Scope
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- ffound - Variable in class nxopen.cae.ThicknessBuilder.ElementThicknessData
-
Element result status:found or not found
- ffound - Variable in class nxopen.cae.ThicknessBuilder.NodeThicknessData
-
Node result status:found or not found
- FftFrequencyData() - Constructor for class nxopen.cae.AfuDataConvertor.FftFrequencyData
-
- FftTimeData() - Constructor for class nxopen.cae.AfuDataConvertor.FftTimeData
-
- fh1Left() - Method in interface nxopen.features.vehicledesign.HeadImpactFrontHeaderDetailBuilder
-
Returns the left FH1 alternative point.
- fh1LeftFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactFrontHeaderDetailBuilder
-
Returns the left FH1 alternative point flag.
- fh1Offset() - Method in interface nxopen.features.vehicledesign.HeadImpactFrontHeaderDetailBuilder
-
Returns the offset used to position FH1.
- fh1Right() - Method in interface nxopen.features.vehicledesign.HeadImpactFrontHeaderDetailBuilder
-
Returns the right FH1 alternative point.
- fh1RightFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactFrontHeaderDetailBuilder
-
Returns the right FH1 alternative point flag.
- fh2Left() - Method in interface nxopen.features.vehicledesign.HeadImpactFrontHeaderDetailBuilder
-
Returns the left FH2 alternative point.
- fh2LeftFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactFrontHeaderDetailBuilder
-
Returns the left FH2 alternative point flag.
- fh2Offset() - Method in interface nxopen.features.vehicledesign.HeadImpactFrontHeaderDetailBuilder
-
Returns the offset used to position FH2.
- fh2Right() - Method in interface nxopen.features.vehicledesign.HeadImpactFrontHeaderDetailBuilder
-
Returns the right FH2 alternative point.
- fh2RightFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactFrontHeaderDetailBuilder
-
Returns the right FH2 alternative point flag.
- FIBER_SIM - Static variable in class nxopen.cae.LaminateImportedLayupBuilder.ApiTypeEnum
-
FiberSIM layup XML file.
- FIBER_SIM_H5 - Static variable in class nxopen.cae.LaminateImportedLayupBuilder.FileEnum
-
FiberSIM layup HDF5 file.
- FIBER_SIM_PART - Static variable in class nxopen.cae.LaminateImportedLayupBuilder.FileEnum
-
Use the FiberSim data in the current part
- FIBER_SIM_XML - Static variable in class nxopen.cae.LaminateImportedLayupBuilder.FileEnum
-
FiberSIM layup XML file.
- FIBER_TYPE - Static variable in class nxopen.ame.OpticalAnnotationSettingsBuilder.AnnotationAttrType
-
- fiberDistance() - Method in interface nxopen.cae.LaminateLayupOffsetBuilder
-
- fiberOrientationOptions() - Method in interface nxopen.cae.LaminateGlobalLayup
-
Returns the fiber orientation options
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- FIELD - Static variable in class nxopen.cae.DurSpecialistSuperpositionEventBuilder.MatchUsingType
-
Compare substrings splitted by tokens
- field() - Method in interface nxopen.cae.NodeTranslateBuilder
-
Returns the scale factor
License requirements: None.
- FIELD - Static variable in class nxopen.cae.ResultProbe.OutputOption
-
- Field - Interface in nxopen.fields
-
Represents an Field abstract class.
- field() - Method in interface nxopen.motion.FieldData
-
Returns the field
License requirements: None.
- FIELD_EXPRESSION - Static variable in class nxopen.cae.PropertyTable.PropertyType
-
- FIELD_WRAPPER - Static variable in class nxopen.BasePropertyTable.BasePropertyType
-
- FIELD_WRAPPER - Static variable in class nxopen.cae.PropertyTable.PropertyType
-
BASE_PROPERTY_TABLE_property_type_field_wrapper
- FieldCollection - Interface in nxopen.fields
-
Represents a collection of Fields
To obtain an instance of this class, refer to
FieldManager
Created in NX11.0.0
- FieldData - Interface in nxopen.motion
-
- FieldDataCollection - Interface in nxopen.motion
-
Represents a collection of motion joints
To obtain an instance of this class, refer to
MotionManager
Created in NX11.0.1
NX_REMOVE_FROM_JAVA_API
- fieldDatas() - Method in interface nxopen.motion.MotionManager
-
Returns the
FieldDataCollection
belonging to this part
Created in NX11.0.1
NX_REMOVE_FROM_JAVA_API
- FieldDomain - Interface in nxopen.fields
-
Represents the Field Domains.
- FieldDomainCollection - Interface in nxopen.fields
-
Provides methods for manipulating the field domains
To obtain an instance of this class, refer to
FieldManager
Created in NX4.0.0
- FieldDrawHelper - Interface in nxopen.fields
-
Represents Field_DrawHelper.
- FieldEvaluator - Interface in nxopen.fields
-
Represents a Field Evaluator which can be used to evaluate a
Field
.
- FieldEvaluator.InterpolationEnum - Class in nxopen.fields
-
Interpolation type
- FieldEvaluator.InverseDistanceWeightingEnum - Class in nxopen.fields
-
Options for IDW (inverse weighted distance) interpolator
- FieldEvaluator.LinearLogOptionEnum - Class in nxopen.fields
-
Log Options for Linear interpolator
- FieldEvaluator.ValuesOutsideTableInterpolationEnum - Class in nxopen.fields
-
Options for outside table values interpolation
- FieldExpression - Interface in nxopen.fields
-
Represents the Field Expression class.
- fieldFind() - Method in interface nxopen.cae.DurSpecialistSuperpositionEventBuilder
-
Returns the source field index.
- fieldFindUsing() - Method in interface nxopen.cae.DurSpecialistSuperpositionEventBuilder
-
Returns the source field delimiter.
- fieldFlag - Variable in class nxopen.uf.UFDrf.WeldSymbols
-
- FieldFormat() - Constructor for class nxopen.uf.UFPlist.FieldFormat
-
- FieldFormat(int, String, String, int, int, int) - Constructor for class nxopen.uf.UFPlist.FieldFormat
-
- FieldFormula - Interface in nxopen.fields
-
Represents the Field Formula class.
- FieldLink - Interface in nxopen.fields
-
Represents the Field Link class.
- FieldLinksTable - Interface in nxopen.fields
-
Represents the Field LinksTable class.
- fieldManager() - Method in interface nxopen.BasePart
-
Returns the field main.
- FieldManager - Interface in nxopen.fields
-
Represents the manager class of the Fields
This manager class gives access to all the fields
Field
within a part,
as well as the collection of domains
FieldDomain
.
- fieldMatchUsing() - Method in interface nxopen.cae.DurSpecialistSuperpositionEventBuilder
-
Returns the target field delimiter.
- fieldMatchWith() - Method in interface nxopen.cae.DurSpecialistSuperpositionEventBuilder
-
Returns the target field index.
- fieldOfViewAngle() - Method in interface nxopen.display.CameraBuilder
-
Returns the field of view angle
License requirements: None.
- fieldOfViewMeasured() - Method in interface nxopen.display.CameraBuilder
-
Returns the field of view measured
License requirements: None.
- FieldProfileTable - Interface in nxopen.fields
-
Represents the Field Profile class.
- FieldProfileTable.SamplingPointOption - Class in nxopen.fields
-
Discrete point type
- fieldQuantity() - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
Returns the field quantity type
License requirements: None.
- FieldReference - Interface in nxopen.fields
-
Represents an reference field
A Reference Field exposes data inside of an abstract data store.
- fields() - Method in interface nxopen.fields.FieldManager
-
Returns a collection of Fields .
- FieldTable - Interface in nxopen.fields
-
Represents the Field Table class.
- FieldTable.IdwOptionsData - Class in nxopen.fields
-
- FieldTable.InterpolationEnum - Class in nxopen.fields
-
- FieldTable.LoadFileOption - Class in nxopen.fields
-
Load file options
- FieldVariable - Interface in nxopen.fields
-
Represents the Field Variables
A variable is a symbol on whose value a function, polynomial, etc., depends.
- FieldVariable.Bounds - Class in nxopen.fields
-
Variable Bounds structure
- FieldVariable.Type - Class in nxopen.fields
-
Variable Types
- FieldVariable.ValueType - Class in nxopen.fields
-
Variable value Type
- fieldWeld() - Method in interface nxopen.annotations.LineWeldBuilder
-
Returns the field indicating the weld is done at the field site
License requirements: None.
- fieldWeld() - Method in interface nxopen.annotations.LineWeldData
-
Returns the flag indicating whether the weld is done at the field site
License requirements: None.
- fieldWeld() - Method in interface nxopen.weld.FilletBuilder
-
Returns the field weld.
- fieldWeld() - Method in interface nxopen.weld.PlugSlotBuilder
-
Returns the field weld
License requirements: None.
- FieldWrapper - Interface in nxopen.fields
-
This class defines a value that is internally backed up by a field.
- FIFTH - Static variable in class nxopen.features.vehicledesign.PedestrianProtectionBuilder.Wad
-
Fifth wrap around distance line
- FIFTH - Static variable in class nxopen.tooling.AutoDimensionBuilder.TextFontType
-
- FIFTH - Static variable in class nxopen.tooling.BlankLayoutBuilder.SnapSizeOption
-
the snap size is 0.2
- FIFTH - Static variable in class nxopen.weld.WeldGroupIdColor
-
Fifth Group Id Color Index
- fifthAnglePos - Variable in class nxopen.cam.CamOperationMotionPostDataType
-
5th axis Output Angle
- fifthObject() - Method in interface nxopen.features.shipdesign.StandardPartItemBuilder
-
Returns the fifth selected object.
- figureFile() - Method in interface nxopen.HumanData
-
Returns the human figure file used to create the human feature
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- FILE - Static variable in class nxopen.annotations.ImportAutocadBlockBuilder.FileFolder
-
File Selection mode
- FILE - Static variable in class nxopen.annotations.ImportSymbolBuilder.FileFolder
-
File Selection mode
- FILE - Static variable in class nxopen.blockstyler.PropertyList.PropertyType
-
File
- FILE - Static variable in class nxopen.cae.WeldBuilder.WeldLocation
-
Creates a weld at locations specified in an input file
- file() - Method in interface nxopen.facet.STLImportBuilder
-
Returns the STL file
License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_1 ("basic freeform modeling")
.
- FILE - Static variable in class nxopen.features.shipdesign.PlateStockBuilder.ThicknessSourceOptions
-
The thickness is defined by a table of standard thicknesses for different material and material grades in CSV file.
- FILE - Static variable in class nxopen.gateway.ImageCaptureBuilder.CaptureMethodType
-
the input from file
- file() - Method in interface nxopen.gateway.ImageCaptureBuilder
-
Returns the file
License requirements: None.
- FILE - Static variable in class nxopen.ListingWindow.DeviceType
-
Output is written to a file instead of the Information window
- File - Interface in nxopen.markup
-
- FILE - Static variable in class nxopen.PropertyContainer.PropertyType
-
File
- FILE_AND_WINDOW - Static variable in class nxopen.ListingWindow.DeviceType
-
Output is written to a file and to the Information window
- FILE_BROWSER - Static variable in class nxopen.CGMBuilder.ActionOption
-
Option allows for export of CGM file to local location when running Teamcenter
- FILE_COULD_NOT_BE_OPENED - Static variable in class nxopen.uf.UFConstants
-
- FILE_DOES_NOT_EXIST - Static variable in class nxopen.uf.UFConstants
-
- FILE_GRIP_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- FILE_IMPORT - Static variable in class nxopen.motion.RoadBuilder.PathDatatypeChoices
-
FileImport
- FILE_NAME - Static variable in class nxopen.preferences.RoutingElectrical.ComponentMatchType
-
Match file name during component assignment.
- FILE_NAME - Static variable in class nxopen.preferences.SessionAssemblies.PartNameOption
-
- FILE_OPERATION_REASON - Static variable in class nxopen.uistyler.StylerEvent.Reason
-
File operation reason
- FILE_UFUN_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- fileBrowser() - Method in interface nxopen.display.IrayPlusSimpleMaterialEditorBuilder
-
Returns the file browser
License requirements: studio_render ("UG STUDIO RENDER")
.
- fileBrowser() - Method in interface nxopen.features.BodyByEquationBuilder
-
Returns the Symbolica or Maple file.
- fileBrowser() - Method in interface nxopen.features.MapleBuilder
-
- fileBrowser() - Method in interface nxopen.features.MathIntegrationBuilder
-
Returns the file name returned by the Browser
License requirements: None.
- fileBrowser() - Method in interface nxopen.features.shipdesign.UpdateShipLibraryBuilder
-
Returns the file browser
License requirements: None.
- fileCount - Variable in class nxopen.uf.UFUgmgr.AskDependentFilesData
-
- fileCount - Variable in class nxopen.uf.UFUgmgr.ListPartRevFilesData
-
- fileData - Variable in class nxopen.uf.UFTag.DecomposeHandleData
-
- fileexist - Variable in class nxopen.annotations.DraftingImage.ExportFileData
-
- fileExists(String) - Method in interface nxopen.RemoteUtilities
-
Tests to see that a file exists
License requirements: None.
- fileFormat() - Method in interface nxopen.display.SaveImageFileBrowserBuilder
-
Returns the Ray Traced Studio static image file format
License requirements: None.
- fileFormat() - Method in interface nxopen.STLImporter
-
Returns the file format.
- FileManagement - Interface in nxopen.pdm
-
This class is responsible for Teamcenter file management related activities.
- FileManagement.ExportFilesData - Class in nxopen.pdm
-
- FileManagement.FileType - Class in nxopen.pdm
-
PDM file types
- filename - Variable in class nxopen.annotations.DraftingImage.ExportFileData
-
- fileName() - Method in interface nxopen.cae.AfuData
-
Returns the name of AFU file
License requirements: None.
- filename() - Method in interface nxopen.cae.FlatPatternsBuilder
-
Returns the string0
License requirements: None.
- fileName() - Method in interface nxopen.cae.LaminateImportedLayupBuilder
-
Returns the full name and path of the file to be imported
License requirements: None.
- filename() - Method in interface nxopen.cae.LaminateImportZonesBuilder
-
Returns the full name and path of the file to be imported
License requirements: None.
- fileName() - Method in interface nxopen.features.subdivision.ExportSubdivisionGeometryBuilder
-
Returns the file name.
- fileName() - Method in interface nxopen.features.subdivision.ImportSubdivisionGeometryBuilder
-
Returns the file name.
- fileName() - Method in interface nxopen.geometricanalysis.ReflectionAnalysisBuilder
-
Returns the file browser.
- fileName() - Method in interface nxopen.geometricutilities.PointsFromFileBuilder
-
Returns the file name of the point data file
License requirements: None.
- fileName() - Method in interface nxopen.Importer
-
Returns the name of the file containing the data to import.
- fileName() - Method in interface nxopen.linedesigner.ExportPlantToDWGBuilder
-
Returns the file name
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- fileName() - Method in interface nxopen.linedesigner.ExportToDWGBuilder
-
Returns the file name
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- fileName() - Method in interface nxopen.LogFile
-
Returns the name of the system log file
License requirements: None.
- filename() - Method in interface nxopen.preferences.RoutingApplicationView
-
Returns the filename of the current application view.
- filename() - Method in interface nxopen.PrintPDFBuilder
-
Returns the filename to be used upon creation of the PDF document.
- filename() - Method in interface nxopen.routing.WatertightFittingsBuilder
-
Returns the name of new part file containing watertight fittings assembly which includes the full path.
- fileName() - Method in interface nxopen.sim.ArchiveImportBuilder
-
Returns the archive file name from which to import data
License requirements: None.
- fileName() - Method in interface nxopen.sim.SinumerikCaExportBuilder
-
Returns the output filename of the SPF file
License requirements: None.
- fileName - Variable in class nxopen.uf.UFPatt.AskData
-
- filename - Variable in class nxopen.uf.UFRoute.AppViewDesc
-
- filename - Variable in class nxopen.uf.UFUgmgr.PartFileInfo
-
- fileName - Variable in class nxopen.uf.UFUi.AskCreatePartFilenameData
-
- fileName - Variable in class nxopen.uf.UFUi.AskOpenPartFilenameData
-
- filename - Variable in class nxopen.uf.UFUi.CreateFileboxData
-
- filename - Variable in class nxopen.uf.UFUi.CreateFileboxWithMultipleFiltersData
-
- filename - Variable in class nxopen.uf.UFUi.SelectTcResultFileToImportData
-
- filename - Variable in class nxopen.uf.UFUi.UgmgrAskCreatePartFileNameData
-
- fileName() - Method in interface nxopen.validate.PartNode
-
Returns the part file name
License requirements: None.
- filename() - Method in interface nxopen.visualreporting.VisualReport
-
Returns the filename where this
VisualReport
was opened from or will be saved to.
- fileNameForDisplay(String) - Method in interface nxopen.uf.UFPart
-
- fileNameForDisplayString(String) - Method in interface nxopen.uf.UFPart
-
- filenameOfVisualReport() - Method in interface nxopen.visualreporting.VisualReportBuilder
-
Returns the file name of the
VisualReport
being built by this
builder.
- fileNames - Variable in class nxopen.uf.UFPart.LoadStatus
-
- fileNames - Variable in class nxopen.uf.UFUgmgr.AskDependentFilesData
-
- fileNames - Variable in class nxopen.uf.UFUgmgr.ListPartRevFilesData
-
- FileNew - Interface in nxopen
-
Represents a
FileNew
This class is not directly created.
- fileNew() - Method in interface nxopen.PartCollection
-
Creates a
FileNew
License requirements: None.
- FileNewApplication - Class in nxopen
-
- FileNewApplicationBuilder - Interface in nxopen.pid
-
Represents a builder class that performs Generic File New operations.
- fileNewDescriptor() - Method in interface nxopen.assemblies.AddComponentBuilder
-
Returns the file new descriptor to identify an added component in 4GD
License requirements: None.
- fileNewDescriptor() - Method in interface nxopen.assemblies.DesignElementBuilder
-
Returns the file new descriptor to identify a design element
License requirements: None.
- FileNewTemplateType - Class in nxopen
-
Enumeration used for templates to determine the type of the template.
- FILEOP_REASON - Static variable in class nxopen.uistyler.StylerEvent.Reason
-
File operation reason
- fileOpenFlag() - Method in interface nxopen.AcisImporter
-
Returns the file open flag - set this to false if doing file import
License requirements: None.
- fileOpenFlag() - Method in interface nxopen.Catiav4Importer
-
Returns the file open flag - should be set to false if doing file import
License requirements: None.
- fileOpenFlag() - Method in interface nxopen.Catiav5Importer
-
Returns the file open flag - should be set to false if doing file import
License requirements: None.
- fileOpenFlag() - Method in interface nxopen.DxfdwgImporter
-
Returns the FileOpenFlag command - should be set to false if doing file import
License requirements: None.
- fileOpenFlag() - Method in interface nxopen.IgesImporter
-
Returns the file open flag - set this to false if doing file import
License requirements: None.
- fileOpenFlag() - Method in interface nxopen.Step203Importer
-
Returns the file open flag - set this to false if doing file import
License requirements: None.
- fileOpenFlag() - Method in interface nxopen.Step214Importer
-
Returns the file open flag - set this to false if doing file import
License requirements: None.
- fileOpenFlag() - Method in interface nxopen.Step242Importer
-
Returns the file open flag - set this to false if doing file import
License requirements: None.
- fileOperation(StylerEvent) - Method in interface nxopen.uistyler.DialogItem.FileOperation
-
Called just before a dialog user selects a file operation, such as in File?
- fileOperationData() - Method in interface nxopen.uistyler.DialogItem
-
Returns the file operation data
License requirements: None.
- FileOperationData - Interface in nxopen.uistyler
-
Represents a FileOperationData for UI Styler .
- FileOperationData.FileOperationState - Class in nxopen.uistyler
-
Describes file state
- FileOperationData.FileOperationType - Class in nxopen.uistyler
-
Describes file operation
- filePath() - Method in interface nxopen.ame.ImportEClassMappingBuilder
-
Returns the eClass mapping file
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- filePath() - Method in interface nxopen.cae.connections.ComponentData
-
Returns the file path
License requirements: None.
- filePicker() - Method in interface nxopen.mechatronics.PreferencesBuilder
-
Returns the export timing chart file path
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- fileSaveFlag() - Method in interface nxopen.AcisExporter
-
Returns the file save flag - this should be set to false if doing File Export
License requirements: None.
- fileSaveFlag() - Method in interface nxopen.Catiav4Creator
-
Returns the file save flag - this should be set to false if doing File Export
License requirements: None.
- fileSaveFlag() - Method in interface nxopen.Catiav5Creator
-
Returns the file save flag - this should be set to false if doing File Export
License requirements: None.
- fileSaveFlag() - Method in interface nxopen.DxfdwgCreator
-
Returns the file save flag - this should be set to false if doing File Export
License requirements: None.
- fileSaveFlag() - Method in interface nxopen.IgesCreator
-
Returns the file save flag - set to false if doing file export
License requirements: None.
- fileSaveFlag() - Method in interface nxopen.Step203Creator
-
- fileSaveFlag() - Method in interface nxopen.Step214Creator
-
- fileSaveFlag() - Method in interface nxopen.StepCreator
-
Returns the file save flag - set to false if doing file export
License requirements: None.
- FileSelection - Interface in nxopen.blockstyler
-
Represents File Selection With Browse block .
- fileSpecification() - Method in interface nxopen.markup.File
-
Returns the file specification
License requirements: None.
- fileSuppressWarnings(boolean) - Method in interface nxopen.uf.UFMotion
-
- fileTceName() - Method in interface nxopen.motion.FlexBodyBuilder
-
Returns the TCE RFI file name
License requirements: None.
- fileToImport() - Method in interface nxopen.ame.ImportEClassProductBuilder
-
Returns the xml file which is being imported
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- fileToImport() - Method in interface nxopen.ame.ImportEClassSchemaBuilder
-
Returns the xml file which is being imported
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- fileToImport() - Method in interface nxopen.ame.ImportGlobalMappingBuilder
-
Returns the xml file which is being imported
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- fileToImport() - Method in interface nxopen.ame.TransferFileDataBuilder
-
Returns the excel file which is being imported
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- fileToOpen - Variable in class nxopen.uf.UFProcessAid.AskSourceObjectData
-
- fileType() - Method in interface nxopen.cae.LaminateImportedLayupBuilder
-
Returns the type of file to be imported
License requirements: None.
- fileTypes - Variable in class nxopen.uf.UFUgmgr.ListPartRevFilesData
-
- fileUnits() - Method in interface nxopen.STLImporter
-
Returns the file units.
- fileUnits() - Method in interface nxopen.VRMLImporter
-
Returns the file units.
- FILL - Static variable in class nxopen.cae.Post.FaceFillStyle
-
- FILL - Static variable in class nxopen.cae.xyplot.BarColorOption
-
Fill color or contour color with no shading
- FILL - Static variable in class nxopen.cae.xyplot.PlateColorOption
-
Fill color with no shading
- FILL - Static variable in class nxopen.cam.DisplayPath.PathDisplayTypes
-
Path Display: Fill
- FILL - Static variable in class nxopen.cam.OperationDisplayOptionsBuilder.PathDisplayTypes
-
Path Display: Fill
- fill(Feature) - Method in interface nxopen.die.DieCollection
-
Creates/Edits the die area fill feature builder.
- FILL - Static variable in class nxopen.features.sheetmetal.GussetBuilder.PlacementTypes
-
Users will specify the spacing of Gussets on the selected bend face and software will calculate the number of occurances.
- Fill - Interface in nxopen.weld
-
Represents a Weld Fill feature
To create or edit an instance of this class, use
WeldFillBuilder
Created in NX7.5.0
- FILL - Static variable in class nxopen.weld.UserDefinedWeldBuilder.WeldTypes
-
Fill Weld type.
- FILL - Static variable in class nxopen.weld.WeldObjectBuilder.CommandName
-
Fill command
- FILL_HOLE - Static variable in class nxopen.facet.FillHoleBuilder.Types
-
Fills individual hole(s).
- FILL_ISLAND - Static variable in class nxopen.facet.FillHoleBuilder.Types
-
Fills a hole defined by inner island and outer facet body.
- FILL_PAT_TYPE_SOLID - Static variable in class nxopen.uf.UFConstants
-
- FILL_PATH_LENGTH - Static variable in class nxopen.features.GeomcopyBuilder.AlongPathDistanceOptions
-
fill path length option
- FILL_VIEW - Static variable in class nxopen.preferences.SessionVisualizationHighQualityImage.ImageSizeType
-
- fillArea - Variable in class nxopen.cae.Post.AnnotationBox
-
- FillArea - Interface in nxopen.die
-
Represents a die design fill area feature.
- fillArea() - Method in interface nxopen.markup.EditObjectDisplayBuilder
-
Returns the closed area needs to be filled with color or not.
- FillAreaBuilder - Interface in nxopen.die
-
Represents a builder that is used to create or edit a
FillArea
feature.
- FillAreaBuilder.Types - Class in nxopen.die
-
Identifies the area of the casting the fill is targeted for.
- FillAreaBuilder.UpperLimitTypes - Class in nxopen.die
-
Specifies how the upper limit of the fill area is defined.
- fillBoundary() - Method in interface nxopen.geometricutilities.PatternFill
-
Returns the fill boundary
License requirements: None.
- FillBoundaryRule - Interface in nxopen
-
Represents a
FacetSelectionRule
that collects flood filled facets without doing any check of facet's existence in current collection.
- FillBuilder - Interface in nxopen.die
-
- FillBuilder.RegionBoundsData - Class in nxopen.die
-
- FILLBY_BOUNDARY - Static variable in class nxopen.geometricutilities.PatternFill.PatternFillOptions
-
section is for fill area.
- FILLBY_FACE - Static variable in class nxopen.geometricutilities.PatternFill.PatternFillOptions
-
section is face-based, and for fill area.
- fillColor() - Method in interface nxopen.diagramming.RenderingPropertiesBuilder
-
Returns the fill color.
- fillColor() - Method in interface nxopen.diagramming.tables.CellSettingsBuilder
-
Returns the fill color.
- FillColorData() - Constructor for class nxopen.diagramming.tables.TableBuilder.FillColorData
-
- fillComponent() - Method in interface nxopen.tooling.MoldFillingBuilder
-
Returns the fill component to be edit.
- FILLED - Static variable in class nxopen.diagramming.ArrowStyleType
-
Filled
- FILLED - Static variable in class nxopen.diagramming.DiagrammingArrowtype
-
Setting the arrow type filled arrow
- FILLED - Static variable in class nxopen.diagramming.SheetBordersAndZonesBuilder.ArrowStyleType
-
Filled
- FILLED - Static variable in class nxopen.drawings.ArrowStyleType
-
Filled
- FILLED - Static variable in class nxopen.drawings.SectionLineStyleBuilder.ArrowheadStyleType
-
Deprecated.
- FILLED - Static variable in class nxopen.drawings.ViewProjectedArrowSettingsBuilder.DimensionsStyleType
-
- FILLED - Static variable in class nxopen.drawings.ViewSectionLineBuilder.StyleType
-
- FILLED - Static variable in class nxopen.preferences.RoutingLogical.FlowArrowEnumType
-
Filled arrow head on flow arrow.
- filled - Variable in class nxopen.uf.UFDrf.AskArrowData
-
- filled - Variable in class nxopen.uf.UFGdt.LeaderSpec
-
- FILLED_ARROW - Static variable in class nxopen.annotations.ArrowheadType
-
- FILLED_ARROW - Static variable in class nxopen.annotations.LeaderData.ArrowheadType
-
Filled arrowhead type
- FILLED_ARROW - Static variable in class nxopen.diagramming.DiagrammingFlowdirectionarrowstyle
-
- FILLED_ARROW - Static variable in class nxopen.uf.UFDrf.ArrowheadAndFillType
-
- FILLED_ARROWHEAD - Static variable in class nxopen.uf.UFDraw.ArwHeadCntl
-
- FILLED_BOX - Static variable in class nxopen.annotations.ArrowheadType
-
- FILLED_BOX - Static variable in class nxopen.uf.UFDrf.ArrowheadAndFillType
-
- FILLED_CIRCLE - Static variable in class nxopen.cae.MarkerType0d
-
- FILLED_CIRCLE - Static variable in class nxopen.cae.ModelDisplayBuilder.NodeMarkerType
-
Filled Circle
- FILLED_CIRCLE - Static variable in class nxopen.cae.ModelDisplayBuilder.NodeUnattachedMarkerType
-
Filled Circle
- FILLED_CIRCLE - Static variable in class nxopen.preferences.SessionModeling.EndpointDisplayStyleType
-
- FILLED_CIRCLE - Static variable in class nxopen.preferences.SessionModeling.PoleDisplayStyleType
-
- FILLED_CIRCLE - Static variable in class nxopen.preferences.SessionModeling.PoleEditStyleType
-
- FILLED_CIRCLE - Static variable in class nxopen.uf.UFDisp.PolyMarker
-
- FILLED_CIRCLE - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- FILLED_DATUM - Static variable in class nxopen.annotations.LeaderData.ArrowheadType
-
Filled datum symbol
- FILLED_DATUM_ARROW - Static variable in class nxopen.annotations.ArrowheadType
-
- FILLED_DIAMOND - Static variable in class nxopen.cae.MarkerType0d
-
- FILLED_DIAMOND - Static variable in class nxopen.uf.UFDisp.PolyMarker
-
- FILLED_DIAMOND - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- FILLED_DOT - Static variable in class nxopen.annotations.ArrowheadType
-
- FILLED_DOT - Static variable in class nxopen.annotations.LeaderData.ArrowheadType
-
Filled dot symbol
- FILLED_DOT - Static variable in class nxopen.uf.UFDrf.ArrowheadAndFillType
-
- FILLED_DOUBLE_ARROW - Static variable in class nxopen.annotations.ArrowheadType
-
- FILLED_DOUBLE_ARROW - Static variable in class nxopen.annotations.LeaderData.ArrowheadType
-
Filled double arrowhead type
- FILLED_DOUBLE_ARROW - Static variable in class nxopen.diagramming.DiagrammingFlowdirectionarrowstyle
-
- FILLED_DOUBLE_ARROW - Static variable in class nxopen.uf.UFDrf.ArrowheadAndFillType
-
- FILLED_DOWN_TRIANGLE - Static variable in class nxopen.uf.UFDisp.PolyMarker
-
- FILLED_DOWN_TRIANGLE - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- FILLED_DOWN_TRIANGLE_IN_CIRCLE - Static variable in class nxopen.uf.UFDisp.PolyMarker
-
- FILLED_DOWN_TRIANGLE_IN_CIRCLE - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- FILLED_DOWN_TRIANGLE_IN_SQUARE - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- FILLED_DOWN_TRIANGLEIN_SQUARE - Static variable in class nxopen.uf.UFDisp.PolyMarker
-
- FILLED_LEFT_TRIANGLE - Static variable in class nxopen.uf.UFDisp.PolyMarker
-
- FILLED_LEFT_TRIANGLE - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- FILLED_LEFT_TRIANGLE_IN_CIRCLE - Static variable in class nxopen.uf.UFDisp.PolyMarker
-
- FILLED_LEFT_TRIANGLE_IN_CIRCLE - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- FILLED_LEFT_TRIANGLE_IN_SQUARE - Static variable in class nxopen.uf.UFDisp.PolyMarker
-
- FILLED_LEFT_TRIANGLE_IN_SQUARE - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- FILLED_RIGHT_TRIANGLE - Static variable in class nxopen.uf.UFDisp.PolyMarker
-
- FILLED_RIGHT_TRIANGLE - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- FILLED_RIGHT_TRIANGLE_IN_CIRCLE - Static variable in class nxopen.uf.UFDisp.PolyMarker
-
- FILLED_RIGHT_TRIANGLE_IN_CIRCLE - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- FILLED_RIGHT_TRIANGLE_IN_SQUARE - Static variable in class nxopen.uf.UFDisp.PolyMarker
-
- FILLED_RIGHT_TRIANGLE_IN_SQUARE - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- FILLED_SQUARE - Static variable in class nxopen.annotations.LeaderData.ArrowheadType
-
Filled square symbol
- FILLED_SQUARE - Static variable in class nxopen.cae.MarkerType0d
-
- FILLED_SQUARE - Static variable in class nxopen.uf.UFDisp.PolyMarker
-
- FILLED_SQUARE - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- FILLED_SQUARE_WITH_ONE_RING - Static variable in class nxopen.cae.MarkerType0d
-
- FILLED_SQUARE_WITH_TWO_RINGS - Static variable in class nxopen.cae.MarkerType0d
-
- FILLED_UP_TRIANGLE - Static variable in class nxopen.uf.UFDisp.PolyMarker
-
- FILLED_UP_TRIANGLE - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- FILLED_UP_TRIANGLE_IN_CIRCLE - Static variable in class nxopen.uf.UFDisp.PolyMarker
-
- FILLED_UP_TRIANGLE_IN_CIRCLE - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- FILLED_UP_TRIANGLE_IN_SQUARE - Static variable in class nxopen.uf.UFDisp.PolyMarker
-
- FILLED_UP_TRIANGLE_IN_SQUARE - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- Filler - Interface in nxopen.routing
-
Represents a Filler .
- FILLER - Static variable in class nxopen.routing.PathStockBuilder.AssignStockType
-
Filler stock type.
- FILLER - Static variable in class nxopen.routing.RouteManager.PartType
-
- FILLER_STOCK - Static variable in class nxopen.routing.StockBrowserBuilder.TypeFilter
-
Filler Stock
- FillerCollection - Interface in nxopen.routing
-
Represents a collection of
Stock
objects.
- fillers() - Method in interface nxopen.routing.RouteManager
-
Filler stock Application collection .
- FILLERSTOCK - Static variable in class nxopen.formboard.UpdateDiscrepancy.ObjectType
-
Filler stock.
- FillerStockBuilder - Interface in nxopen.routing
-
Creates Filler stock on selected Segments.
- FILLET - Static variable in class nxopen.annotations.LineWeldDataBuilder.WeldSymbolType
-
- FILLET - Static variable in class nxopen.annotations.Symbol
-
Specifies fillet weld symbol
- FILLET - Static variable in class nxopen.cae.Mesh2dBuilder.GeometryType
-
Deprecated.
Fillet
- FILLET - Static variable in class nxopen.features.OffsetCurveBuilder.TrimOption
-
Fillet
- FILLET - Static variable in class nxopen.features.sheetmetal.BreakCornerBuilder.TypeOptions
-
- fillet(Curve, Curve, Point3d, Point3d, double, Sketch.TrimInputOption, Sketch.CreateDimensionOption, Sketch.AlternateSolutionOption) - Method in interface nxopen.Sketch
-
Fillets curves and creates appropriate constraints.
- fillet(Curve, Curve, Point3d, Point3d, Point3d, double, Sketch.TrimInputOption, Sketch.CreateDimensionOption, Sketch.AlternateSolutionOption) - Method in interface nxopen.Sketch
-
Fillets curves and creates appropriate constraints.
- fillet(Curve, Curve, Curve, Point3d, Point3d, Point3d, double, Sketch.TrimInputOption, Sketch.DeleteThirdCurveOption, Sketch.CreateDimensionOption, Sketch.AlternateSolutionOption) - Method in interface nxopen.Sketch
-
Fillets curves and creates appropriate constraints.
- fillet(Curve, Curve, Curve, Point3d, Point3d, Point3d, Point3d, double, Sketch.TrimInputOption, Sketch.DeleteThirdCurveOption, Sketch.CreateDimensionOption, Sketch.AlternateSolutionOption) - Method in interface nxopen.Sketch
-
Fillets curves and creates appropriate constraints.
- FILLET - Static variable in class nxopen.tooling.CornerDesignBuilder.CornerTypeOpt
-
fillet
- FILLET - Static variable in class nxopen.tooling.DieCavityAndSlugHoleBuilder.BottomPlateSlugItems
-
Bottom plate slug type is fillet
- FILLET - Static variable in class nxopen.tooling.DieCavityAndSlugHoleBuilder.DiePlateThreeSlugType
-
- FILLET - Static variable in class nxopen.tooling.DieCavityAndSlugHoleBuilder.DiePlateTwoSlugType
-
- FILLET - Static variable in class nxopen.tooling.DieCavityAndSlugHoleBuilder.DieShoeSlugTypeItems
-
Die shoe slug type is fillet
- FILLET - Static variable in class nxopen.tooling.PiercingInsertBuilder.NormalBbpslugType
-
Bottom plate slug type is fillet
- FILLET - Static variable in class nxopen.tooling.PiercingInsertBuilder.NormalDsslugType
-
Die shoe slug type is fillet
- FILLET - Static variable in class nxopen.tooling.PiercingInsertBuilder.PunchPocketTypeItemsBP
-
Punch pocket type in backing plate is fillet
- FILLET - Static variable in class nxopen.tooling.PiercingInsertBuilder.PunchPocketTypeItemsPP
-
Punch pocket type in punch plate is fillet
- FILLET - Static variable in class nxopen.tooling.PiercingInsertBuilder.PunchPocketTypeItemsSP
-
Punch pocket type in stripper plate is fillet
- FILLET - Static variable in class nxopen.tooling.PunchInsertBuilder.PunchPocketTypeItemsBackingPlate
-
Punch pocket type in backing plate is fillet
- FILLET - Static variable in class nxopen.tooling.PunchInsertBuilder.PunchPocketTypeItemsPunchPlate
-
Punch pocket type in punch plate is fillet
- FILLET - Static variable in class nxopen.tooling.PunchInsertBuilder.PunchPocketTypeItemsStripperPlate
-
Punch pocket type in stripper plate is fillet
- FILLET - Static variable in class nxopen.tooling.SpecialPiercingInsertBuilder.NormalBottomBackingPlateSlugType
-
Bottom backing plate slug type is fillet
- FILLET - Static variable in class nxopen.tooling.SpecialPiercingInsertBuilder.NormalDieShoeSlugType
-
Die shoe slug type is fillet
- Fillet - Interface in nxopen.weld
-
Represents a Weld Fillet Feature.
- FILLET - Static variable in class nxopen.weld.UserDefinedWeldBuilder.WeldTypes
-
Fillet Weld type.
- FILLET - Static variable in class nxopen.weld.WeldJointBuilder.WeldTypes
-
T-Joint.
- FILLET - Static variable in class nxopen.weld.WeldObjectBuilder.CommandName
-
Fillet Weld command
- FILLET_ARC - Static variable in class nxopen.features.SectionSurfaceBuilder.SectionMethodCircularTangentEnum
-
Deprecated.
fillet arc
- FILLET_ARC - Static variable in class nxopen.features.SectionSurfaceBuilderEx.SectionMethodCircleTangentType
-
fillet arc
- FILLET_BRIDGE - Static variable in class nxopen.features.SectionSurfaceBuilder.Types
-
Deprecated.
fillet bridge
- FILLET_BRIDGE - Static variable in class nxopen.features.SectionSurfaceBuilderEx.CubicType
-
Fillet Bridge mode
- FILLET_DENSITY - Static variable in class nxopen.cae.MeshControlBuilder.Types
-
- FILLET_FEATURE - Static variable in class nxopen.uf.UFConstants
-
- FILLET_FEATURE - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
-
- FILLET_HILITE - Static variable in class nxopen.features.SectionSurfaceBuilder.Types
-
Deprecated.
fillet hilite
- FILLET_NA_TYPE - Static variable in class nxopen.uf.UFWeld.Types
-
- FILLET_PLN_PERP - Static variable in class nxopen.uf.UFConstants
-
- FILLET_RHO - Static variable in class nxopen.features.SectionSurfaceBuilder.Types
-
Deprecated.
fillet rho
- FILLET_SHOULDER - Static variable in class nxopen.features.SectionSurfaceBuilder.Types
-
Deprecated.
fillet shoulder
- FILLET_TYPE - Static variable in class nxopen.uf.UFWeld.Types
-
- FILLET_WELD - Static variable in class nxopen.uf.UFConstants
-
- FILLET_WELD - Static variable in class nxopen.weld.WeldFeatureSetType
-
Fillet Weld
- FILLET_WELD_NON_ASSOCIATIVE - Static variable in class nxopen.uf.UFConstants
-
- FILLET_WELD_TYPE - Static variable in class nxopen.uf.UFWeld.Types
-
- filletAxialElementSizeOption() - Method in interface nxopen.cae.MeshControlBuilder
-
Returns the cylinder axial element size option
License requirements: None.
- FilletBuilder - Interface in nxopen.weld
-
- FilletBuilder.EnumConstructionMethod - Class in nxopen.weld
-
the options for which construction method to use.
- FilletBuilder.EnumContour - Class in nxopen.weld
-
the Contour enum.
- FilletBuilder.EnumExtendEdges - Class in nxopen.weld
-
the options for populating the edge selections.
- FilletBuilder.EnumExtensionMethod - Class in nxopen.weld
-
the Extension enum.
- FilletBuilder.EnumFillFaceHolesType - Class in nxopen.weld
-
the fill method to be applied.
- FilletBuilder.EnumSkipWeldMethod - Class in nxopen.weld
-
the Skipweld enum.
- FilletBuilder.EnumWeldingType - Class in nxopen.weld
-
the WeldingType enum.
- filletCircumMinElementSize() - Method in interface nxopen.cae.MeshControlBuilder
-
Returns the fillet circum min element size
License requirements: None.
- filletCircumNumberElements() - Method in interface nxopen.cae.MeshControlBuilder
-
Returns the fillet circum number elements
License requirements: None.
- filletCircumSizeOption() - Method in interface nxopen.cae.MeshControlBuilder
-
Returns the fillet circum size option
License requirements: None.
- filletCircumTargetElemSize() - Method in interface nxopen.cae.MeshControlBuilder
-
Returns the fillet circum target elem size
License requirements: None.
- filletColor() - Method in interface nxopen.weld.WeldJointBuilder
-
Returns the color for T-joint weld type joints
License requirements: None.
- FilletData() - Constructor for class nxopen.Sketch.FilletData
-
- filletDensitySize() - Method in interface nxopen.cae.MeshControlDisplayOptionsBuilder
-
Returns the fillet density size
License requirements: None.
- filletDirectionVector() - Method in interface nxopen.features.AOCSBuilder
-
Returns the fillet vector
License requirements: solid_modeling ("SOLIDS MODELING") OR insp_programming ("INSPECTION PROGRAMMING")
.
- filletElementSize() - Method in interface nxopen.cae.MeshControlBuilder
-
Returns the fillet element size
License requirements: None.
- FilletFaceMethod - Interface in nxopen.cae
-
Represents the output from the fillet face smart selector method
To obtain an instance of this class use CAE::SmartSelectionManager
.
- filletFont() - Method in interface nxopen.weld.WeldJointBuilder
-
Returns the curve font for T-joint weld type joints
License requirements: None.
- filletingRadius() - Method in interface nxopen.cam.CornerControlBuilder
-
Returns the corner filleting radius.
- filletMaxAngle() - Method in interface nxopen.cae.MeshControlBuilder
-
Returns the fillet max angle
License requirements: None.
- filletMaxRad - Variable in class nxopen.uf.UFSf.Ugs2dMeshParms
-
- filletMaxRad - Variable in class nxopen.uf.UFSf.UgsMeshAbstractionParams
-
- filletMaxRad - Variable in class nxopen.uf.UFSf.UgsTetMeshParms
-
- filletMaxRadius() - Method in interface nxopen.cae.MeshControlBuilder
-
Returns the fillet max radius
License requirements: None.
- filletMethod() - Method in interface nxopen.cae.MeshControlBuilder
-
Returns the fillet method
License requirements: None.
- filletMinAngle() - Method in interface nxopen.cae.MeshControlBuilder
-
Returns the fillet min angle
License requirements: None.
- filletMinRad - Variable in class nxopen.uf.UFSf.Ugs2dMeshParms
-
- filletMinRad - Variable in class nxopen.uf.UFSf.UgsMeshAbstractionParams
-
- filletMinRad - Variable in class nxopen.uf.UFSf.UgsTetMeshParms
-
- filletMinRadius() - Method in interface nxopen.cae.MeshControlBuilder
-
Returns the fillet min radius
License requirements: None.
- filletNumElem - Variable in class nxopen.uf.UFSf.Ugs2dMeshParms
-
- filletNumElem - Variable in class nxopen.uf.UFSf.UgsMeshAbstractionParams
-
- filletNumElem - Variable in class nxopen.uf.UFSf.UgsTetMeshParms
-
- filletOption() - Method in interface nxopen.features.AOCSBuilder
-
Returns the fillet option
License requirements: solid_modeling ("SOLIDS MODELING") OR insp_programming ("INSPECTION PROGRAMMING")
.
- filletRadius() - Method in interface nxopen.features.AOCSBuilder
-
Returns the fillet radius
License requirements: solid_modeling ("SOLIDS MODELING") OR insp_programming ("INSPECTION PROGRAMMING")
.
- filletRadius() - Method in interface nxopen.features.DraftBodyBuilder
-
Returns the fillet radius
License requirements: None.
- filletradscale() - Method in interface nxopen.cae.ResultVariable
-
Returns the Fillet radius scale factor
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- fillets - Variable in class nxopen.Sketch.FilletData
-
The fillet arcs that are created.
- filletSectionCorners() - Method in interface nxopen.features.sheetmetal.DimpleBuilder
-
Returns the Rounding Option for section Corners which contain Non Fillet Radii
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- filletSectionCorners() - Method in interface nxopen.features.sheetmetal.DrawnCutoutBuilder
-
Returns the Rounding Option for section Corners which contain Non Fillet Radii
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- FilletSizes() - Constructor for class nxopen.weld.JointExitBuilder.FilletSizes
-
- FilletSizes(double, double, double) - Constructor for class nxopen.weld.JointExitBuilder.FilletSizes
-
Constructor for the FilletSizes object.
- filletToggle - Variable in class nxopen.uf.UFSf.Ugs2dMeshParms
-
- filletToggle - Variable in class nxopen.uf.UFSf.UgsMeshAbstractionParams
-
- filletToggle - Variable in class nxopen.uf.UFSf.UgsTetMeshParms
-
- filletType - Variable in class nxopen.uf.UFSf.Ugs2dMeshParms
-
- filletType - Variable in class nxopen.uf.UFSf.UgsMeshAbstractionParams
-
- filletType - Variable in class nxopen.uf.UFSf.UgsTetMeshParms
-
- filletType() - Method in interface nxopen.weld.FilletBuilder
-
Returns the fillet type.
- filletWidth() - Method in interface nxopen.weld.WeldJointBuilder
-
Returns the curve with for T-joint weld type joints
License requirements: None.
- fillFaceHoles() - Method in interface nxopen.weld.FilletBuilder
-
Returns the value to identify if the face set should be filled during construction.
- fillForAddendum() - Method in interface nxopen.die.FillBuilder
-
Returns the fill for addendum setting of the area fill
License requirements: die_engineering ("DIE ENGINEERING")
.
- FillHole - Interface in nxopen.features
-
Represents a fill hole feature.
- FillHoleBuilder - Interface in nxopen.facet
-
This class finds and fills holes to a prescribed boundary smoothness condition.
- FillHoleBuilder - Interface in nxopen.features
-
- FillHoleBuilder.BorderContinuity - Class in nxopen.features
-
Represents continuity value at a border curve.
- FillHoleBuilder.ContinuityTypes - Class in nxopen.features
-
border continuity connects border object with the surface continuity
- FillHoleBuilder.ShapeControlTypes - Class in nxopen.features
-
type of the shape control
- FillHoleBuilder.SmoothTypes - Class in nxopen.facet
-
Smoothness and boundary continuity options.
- FillHoleBuilder.TargetTypes - Class in nxopen.facet
-
Options defining how to target holes for filling.
- FillHoleBuilder.Types - Class in nxopen.facet
-
Hole filling type options.
- fillHoles(boolean) - Method in interface nxopen.facet.FillHoleBuilder
-
Fills targeted holes.
- fillHolesOption() - Method in interface nxopen.cae.Shell2SolidBuilder
-
Returns the mesh size variation
License requirements: nx_masterfem ("Finite Element Modeling")
.
- FILLIN_FLARED_BEVEL - Static variable in class nxopen.weld.WeldGrooveShape
-
Fillin Flared Bevel shape
- FILLIN_FLARED_BEVEL_GROOVE - Static variable in class nxopen.weld.WeldGrooveBuilder.Types
-
Fillin Flared Bevel Groove
- FILLIN_FLARED_V - Static variable in class nxopen.weld.WeldGrooveShape
-
Fillin Flared V shape
- FILLIN_FLARED_VGROOVE - Static variable in class nxopen.weld.WeldGrooveBuilder.Types
-
- FILLING_COEFFICIENT - Static variable in class nxopen.features.shipdesign.InverseBendingLinesBuilder.MethodType
-
Filling Coefficient (unsupported).
- fillingCoefficient() - Method in interface nxopen.features.shipdesign.InverseBendingLinesBuilder
-
Returns the filling coefficient that represents the amplitude of the bending line relative to the profile height.
- fillingColor() - Method in interface nxopen.cae.xyplot.BarChartStyleSetting
-
Returns the filling color
License requirements: None.
- fillingColor() - Method in interface nxopen.cae.xyplot.BaseBarStyleSetting
-
Returns the filling color
License requirements: None.
- fillingColor() - Method in interface nxopen.cae.xyplot.BasePlateStyleSetting
-
- fillingColor() - Method in interface nxopen.cae.xyplot.SurfaceStyleSetting
-
Returns the filling color
License requirements: None.
- fillingColor() - Method in interface nxopen.cae.xyplot.TextBoxStyleSetting
-
Returns the text box filling color
License requirements: None.
- fillMargin() - Method in interface nxopen.geometricutilities.PatternFill
-
Returns the fill margin
License requirements: None.
- fillName() - Method in interface nxopen.cae.LaminateFillSetupBuilder
-
Returns the name of the laminate fill setup
License requirements: None.
- fillOpacity() - Method in interface nxopen.diagramming.RenderingPropertiesBuilder
-
Returns the fill opacity.
- fillOpacity() - Method in interface nxopen.diagramming.tables.CellSettingsBuilder
-
Returns the fill opacity.
- fillOptions() - Method in interface nxopen.geometricutilities.PatternFill
-
Returns the fill options
License requirements: None.
- fillPathLength() - Method in interface nxopen.features.GeomcopyBuilder
-
Returns the fill path length, a distance option for along path type of instancing.
- fillPercentage() - Method in interface nxopen.routing.electrical.CablewaysBuilder
-
Returns the fill percentage expression
License requirements: routing_cabling ("Routing Cabling")
.
- fillStripList() - Method in interface nxopen.weld.WeldFillBuilder
-
Returns the fill strip list.
- FILLZERO - Static variable in class nxopen.cae.ResultProbeBuilder.ErrorHandling
-
- FILM_THICKNESS - Static variable in class nxopen.cae.Result.Quantity
-
- filter() - Method in interface nxopen.annotations.PinListBuilder
-
Returns the category specifies the filter type.
- FILTER - Static variable in class nxopen.assemblies.SearchTerm.SearchTermLogicType
-
Filter using results found by this search term
- filter(UIBlock, TaggedObject) - Method in interface nxopen.blockstyler.BlockDialog.Filter
-
Filter callback
License requirements: None.
- filter() - Method in interface nxopen.blockstyler.FileSelection
-
Returns the Filter
Format of the filter string, for a group of related filter extensions will be "Group 1(*.xxx;*.yyy;*.zzz),Group 2(*.aaa;*.bbb)" e.g."
- filter(boolean, int, boolean, String, boolean, int, boolean, int) - Method in interface nxopen.cae.ModelingObjectPropertyTableCollection
-
- filter(NXObject) - Method in interface nxopen.features.CustomFeatureSelectionFilter
-
Custom Feature Selection Filter
License requirements: solid_modeling ("SOLIDS MODELING")
.
- filter() - Method in interface nxopen.tooling.CompDrawingBuilder
-
Returns the filter to select component for drawing.
- filter() - Method in interface nxopen.weld.ConnectionFinderBuilder
-
Returns the filter values to contol Save All processing.
- filterBlankingPlugin(NXObject, String, String, String) - Method in interface nxopen.routing.CustomManager.FilterBlankingPlugin
-
This defines the prototype for the filter blanking plugin.
- FilterBuilder - Interface in nxopen.features.shipdesign
-
A builder that allows the user to define common properties of ship objects and then
add objects of similar properties to the select object list.
- filterCallback(NXObject, Selection.MaskTriple, SelectionHandle) - Method in interface nxopen.Selection.FilterCallback
-
- filterCondition() - Method in interface nxopen.visualreporting.Rule
-
- filterConnectionsByType(IConnection[], ConnectionType) - Method in interface nxopen.cae.connections.Utils
-
Filters a list of connections by type
License requirements: None.
- filterEnum() - Method in interface nxopen.cam.InspectionGraphicalReportBuilder
-
Returns the filter enum
License requirements: None.
- filterFile - Variable in class nxopen.validate.XmlComparator.Options
-
File specification of filter file.
- filterNavigator() - Method in interface nxopen.assemblies.ConstraintDisplayBuilder
-
Returns the flag indicating whether the assembly navigator should filter hidden constraints.
- filterOnCurrentSpecifications(CharacteristicList, String[]) - Method in interface nxopen.preferences.RoutingPartLibrary
-
Does a characteristic list match the current discipline and specifications?
- filterOptionValue() - Method in interface nxopen.routing.DesignRuleViolationViewer
-
Returns the value for filter option of route Design Rule Violation
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- filterpaths - Variable in class nxopen.routing.ManualRouteBuilder.CreateValidPointsOnPathsData
-
- filterRadius() - Method in interface nxopen.cae.optimization.TBSTopologySensitivityOptimizationParameters
-
Returns the filter for mesh independence and minimum size
License requirements: None.
- filterString() - Method in interface nxopen.routing.CompareRunsBuilder
-
Returns the filter used to limit which runs are compared among those in the folder or on the item revision
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- filterString - Variable in class nxopen.uf.UFUi.CreateFileboxData
-
- filterTag - Variable in class nxopen.uf.UFAssem.AskLastFilterData
-
- filterTaggedObjectCallback(TaggedObject, Selection.MaskTriple, SelectionHandle) - Method in interface nxopen.Selection.FilterTaggedObjectCallback
-
It is an optional callback which the user can provide to perform
application specific filtering when selecting tagged objects.
- filterToolFace() - Method in interface nxopen.features.LatticeBuilder
-
Returns the faces of the boundary body that the dangling rods connected to will be removed from the lattice body
License requirements: None.
- filterType() - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
Returns the filter type to use for detailed output
License requirements: None.
- filterType() - Method in interface nxopen.routing.StockBrowserBuilder
-
Returns the stock type filter which defines the type of stock
License requirements: routing_base ("Routing Basic")
.
- FIN_TOPO - Static variable in class nxopen.uf.UFBrep.TopoType
-
- FINAL_FINISH_PASS - Static variable in class nxopen.cam.Cutcom.Types
-
cutter compensation on last finish pass
- FINAL_FINISH_PASS - Static variable in class nxopen.cam.NcmPlanarBuilder.CutcomTypes
-
cutter compensation on last finish pass
- FINAL_PASS - Static variable in class nxopen.cam.NcmHoleMachining.CutcomTypes
-
cutter compensation on last pass
- finalizeCreatePartingSurface() - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder
-
Finalize the creation of bounded plane or enlarged surface parting surface.
- finalizeCreation(Part, String, String, BaseFemPart.AxisymAbstractionType, String[], boolean, CoordinateSystem) - Method in interface nxopen.cae.AssyFemPart
-
Finalizes the creation of the assembly fem part file.
- finalizeCreation(Part, String, String, BaseFemPart.AxisymAbstractionType, String[]) - Method in interface nxopen.cae.AssyFemPart
-
- finalizeCreation(Part, String, String, String[]) - Method in interface nxopen.cae.AssyFemPart
-
- finalizeCreation(FemCreationOptions) - Method in interface nxopen.cae.FemPart
-
Finalizes the creation of the fem part file.
- finalizeCreation(Part, String, FemPart.UseBodiesOption, Body[], FemSynchronizeOptions, String, String, BaseFemPart.AxisymAbstractionType, String[]) - Method in interface nxopen.cae.FemPart
-
- finalizeCreation(Part, String, FemPart.UseBodiesOption, Body[], FemSynchronizeOptions, String, String, BaseFemPart.AxisymAbstractionType, String[], boolean) - Method in interface nxopen.cae.FemPart
-
- finalizeCreation(CaePart, String[]) - Method in interface nxopen.cae.SimPart
-
Finalizes the creation of the sim part file.
- finalizeCreation(CaePart, int, String[]) - Method in interface nxopen.cae.SimPart
-
Finalizes the creation of the sim part file.
- finalizeCreationManaged(Part, boolean, FemPart.UseBodiesOption, Body[], FemSynchronizeOptions, String, String, BaseFemPart.AxisymAbstractionType, String[]) - Method in interface nxopen.cae.FemPart
-
- finalizePlacement(CharacteristicList, CharacteristicList, String, int, int, boolean) - Method in interface nxopen.routing.PlacePartBuilder
-
Complete the placement operation.
- finalizePlacementForScrewSeat(TaggedObject, TaggedObject, Point3d, Point3d, Expression, Expression, Vector3d, TaggedObject, TaggedObject) - Method in interface nxopen.routing.EditPlacePartBuilder
-
Places a screw measurement holder seat part onto a target object by locating and constraining by the given parameters.
- finalizeProcessing() - Method in interface nxopen.features.shipdesign.ShipPreparationBuilder
-
Cleans up all old ship preparation features, runs update and updates edge pairing.
- finalRetract() - Method in interface nxopen.cam.NcmHoleMachining
-
Returns the final retract settings
License requirements: None.
- finalRetractDistance() - Method in interface nxopen.cam.CenterlineDrillTurningBuilder
-
Returns the retract distance for simulated cycles
License requirements: None.
- finalRetractType() - Method in interface nxopen.cam.CenterlineDrillTurningBuilder
-
Returns the retract type for simulated cycles
License requirements: None.
- finalSafeDistance() - Method in interface nxopen.cam.NcmHoleMachining
-
Returns the final safe distance builder (inheritable tool dep)
License requirements: None.
- finalSafeDistance() - Method in interface nxopen.cam.NcmTransferTypes
-
Returns the final safe distance builder (inheritable tool dep)
License requirements: None.
- finalSafeDistanceBuilder() - Method in interface nxopen.cam.NcmPlanarBuilder
-
Returns the final safe distance builder (inheritable tool dep)
License requirements: None.
- finalStock() - Method in interface nxopen.cam.GeometrySet
-
Returns the final stock
License requirements: None.
- finalType() - Method in interface nxopen.cam.NcmHoleMachining
-
Returns the final type
License requirements: None.
- finalType() - Method in interface nxopen.cam.NcmPlanarBuilder
-
Returns the final type
License requirements: None.
- finalType() - Method in interface nxopen.cam.NcmTransferTypes
-
Returns the final type
License requirements: None.
- find(String) - Method in interface nxopen.cae.AssyFEModel
-
Finds the
NXObject
with the given identifier as recorded in a journal.
- find(String) - Method in interface nxopen.cae.AtvSetCollection
-
Finds a ATV Set with a specified name.
- find(String) - Method in interface nxopen.cae.BaseIteration
-
- find(String) - Method in interface nxopen.cae.BaseLoadcase
-
- find(String) - Method in interface nxopen.cae.CfdAutoRefinementConstraintCollection
-
- find(String) - Method in interface nxopen.cae.CfdContactPreventionConstraintCollection
-
- find(String) - Method in interface nxopen.cae.CfdLocalResolutionConstraintCollection
-
- find(String) - Method in interface nxopen.cae.DurSpecialistParameterObjectCollection
-
- find(String) - Method in interface nxopen.cae.DurSpecialistSimulationObjectTable
-
- find() - Method in interface nxopen.cae.DurSpecialistSuperpositionEventBuilder
-
Returns the search pattern.
- find(String) - Method in interface nxopen.cae.FEModel
-
Finds the
NXObject
with the given identifier as recorded in a journal.
- find(String) - Method in interface nxopen.cae.FEModelOccurrence
-
Finds the object within the
FEModelOccurrence
context,
with the given identifier as recorded in a journal.
- find(String) - Method in interface nxopen.cae.FluidDomainCollection
-
- find(String) - Method in interface nxopen.cae.FrfSetCollection
-
Finds a FRF Set Set with a specified name.
- find(String) - Method in interface nxopen.cae.LayoutStateCollection
-
- find(String) - Method in interface nxopen.cae.LayoutStateDataReferenceCollection
-
Finds a data reference with the specified name.
- find(String) - Method in interface nxopen.cae.ModeSetCollection
-
Finds a Mode Set Set with a specified name.
- find(String) - Method in interface nxopen.cae.optimization.TBSOptimizationSolution
-
Finds the
TaggedObject
with the given identifier as recorded in a journal.
- find(String) - Method in interface nxopen.cae.PostScenarioAvailableDescriptorCollection
-
Finds an input definition with a certain name.
- find(String) - Method in interface nxopen.cae.PostScenarioBuilderDataDefinitionCollection
-
Finds a Data Definition that has a certain name.
- find(String) - Method in interface nxopen.cae.PostScenarioBuilderSlotCollection
-
Finds a slot with a certain name.
- find(String) - Method in interface nxopen.cae.PostScenarioConfigurationVariableCollection
-
Finds a Variable with a certain name.
- find(String) - Method in interface nxopen.cae.PostScenarioDescriptorCollection
-
Finds a Descriptor with a certain name.
- find(String) - Method in interface nxopen.cae.PostScenarioInputDefinitionCollection
-
Finds an input definition with a certain name.
- find(String) - Method in interface nxopen.cae.PostScenarioMeshDefinitionCollection
-
Finds a Mesh Definition with a certain name.
- find(String) - Method in interface nxopen.cae.PostScenarioVariableCollection
-
Finds a Variable with a certain name.
- find(String) - Method in interface nxopen.cae.PostScenarioVisualizationCollection
-
Finds a Visualization with a certain name.
- find(String) - Method in interface nxopen.cae.Result
-
- find(String) - Method in interface nxopen.cae.ResultMeasureCollection
-
Finds the
ResultMeasure
with the given identifier as recorded in a journal.
- find(String) - Method in interface nxopen.cae.SimConditionCollection
-
Collection's object finder
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- find(String) - Method in interface nxopen.cae.SimConditionParamCollection
-
Collection's object finder
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- find(String) - Method in interface nxopen.cae.SimConditionSequenceCollection
-
Collection's object finder
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- find(String) - Method in interface nxopen.cae.SimConditionTimeStepCollection
-
Collection's object finder
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- find(String) - Method in interface nxopen.cae.SimLoadRecipeCollection
-
Finds a Load Recipe with a specified name.
- find(String) - Method in interface nxopen.cae.SimLoadRecipeMapEntryCollection
-
Finds a Load Recipe Map Entry of a certain index.
- find(String) - Method in interface nxopen.cae.SimLoadRecipeMappingCollection
-
Finds a Load Recipe Maping of a certain load type.
- find(String) - Method in interface nxopen.cae.SimLoadRecipeSourceCollection
-
Finds a Source with a specified path.
- find(String) - Method in interface nxopen.cae.SimSolution
-
Returns the children of the Solution of the given Identifier
License requirements: None.
- find(String) - Method in interface nxopen.cae.SimSolutionStep
-
Returns the children of the Solution Step of the given Identifier
License requirements: None.
- find(String) - Method in interface nxopen.cae.xyplot.BaseDisplayStyleSetting
-
Finds the
TaggedObject
with the given identifier as recorded in a journal.
- find(String) - Method in interface nxopen.cae.xyplot.BasicModel
-
- find(String) - Method in interface nxopen.cae.xyplot.Graph
-
- find(String) - Method in interface nxopen.cae.xyplot.Plot
-
- find(String) - Method in interface nxopen.CollaborativeDesignCollection
-
Finds the
TaggedObject
with the given identifier as recorded in a journal.
- find(String) - Method in interface nxopen.ColorManager
-
Finds a color with the specified name
License requirements: None.
- find(int) - Method in interface nxopen.ColorManager
-
Finds a color with the specified ID
License requirements: None.
- find(String) - Method in interface nxopen.display.CgfxAttrCollection
-
- find(String) - Method in interface nxopen.display.CgfxMattexCollection
-
- find(String) - Method in interface nxopen.display.IDynamicSectionCutCreator
-
- find(String) - Method in interface nxopen.mfgmodel.MfgModelManager
-
Finds the
TaggedObject
with the given identifier as recorded in a journal.
- find(String) - Method in interface nxopen.motion.GraphManager
-
- find(String) - Method in interface nxopen.motion.ResultMeasureCollection
-
- find(String) - Method in interface nxopen.report.CommandManager
-
Finds the
TaggedObject
with the given identifier as recorded in a journal.
- findActivePressModel() - Method in interface nxopen.die.DieSimCollection
-
Finds the active press model, if any, in the part's assembly structure
License requirements: ug_die_design ("Die Design")
.
- findAllFunctions() - Method in interface nxopen.uf.UFMotion
-
- FindAllFunctionsData() - Constructor for class nxopen.uf.UFMotion.FindAllFunctionsData
-
- findAllRoots() - Method in interface nxopen.motion.AnalyticalContactBuilder
-
Returns the find all roots
License requirements: mechanisms ("MECHANISMS")
.
- findAllSubdirectories(String) - Method in interface nxopen.uf.UF
-
- FindAllSubdirectoriesData() - Constructor for class nxopen.uf.UF.FindAllSubdirectoriesData
-
- findAllVisibleConnectedElements() - Method in interface nxopen.cae.modelcheck.AlignBeamElementDirectionBuilder
-
Finds all visible elements connected with the seed element
License requirements: None.
- findAllVisibleConnectedElements() - Method in interface nxopen.cae.modelcheck.AlignShellElementNormalBuilder
-
Finds all visible elements connected with the seed element
License requirements: None.
- findApparentIntersections() - Method in interface nxopen.annotations.HatchStyleBuilder
-
Returns the Find Apparent Intersections creation flag.
- findAttribute(Tag, int, String) - Method in interface nxopen.uf.UFAttr
-
- findAxis(String) - Method in interface nxopen.sim.KinematicConfigurator
-
Find the axis with the given name
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- FindAxisData() - Constructor for class nxopen.sim.KinematicConfigurator.FindAxisData
-
- findBasicDesignData(Component[]) - Method in interface nxopen.features.shipdesign.ShipPreparationBuilder
-
Outputs the basic design data found in the given components.
- findBlock(String) - Method in interface nxopen.blockstyler.CompositeBlock
-
Finds a block contained in the composite block.
- findBodiesWithoutMaterial() - Method in interface nxopen.PhysicalMaterialCollection
-
Returns the bodies that don't have a material assigned.
- findBodiesWithoutPreferredMaterial() - Method in interface nxopen.PhysicalMaterialCollection
-
Returns the bodies that are not using the preferred material (either no material assigned or the non-preferred a different material assigned).
- findBodyHoles(Body) - Method in interface nxopen.tooling.EdgePatchBuilder
-
Find holes on the input body.
- FindByAttributesBuilder - Interface in nxopen.routing
-
Find runs/objects with specified attribute name and attribute value criteria,
highlight the corresponding nodes in the run navigator and the graphics area
To create a new instance of this class, use
RouteManager.createFindByAttributesBuilder()
Created in NX8.5.0
- findByObject(TaggedObject) - Method in interface nxopen.mechatronics.PMNavFolderObjectCollection
-
- findCachedReferencers(String) - Method in interface nxopen.cae.GRMSearch
-
Find CAE Objects as above, only from the cache of already
searched items.
- findCheckerNode(int) - Method in interface nxopen.validate.Validator
-
Returns a checker node.
- findClonePartItem(String) - Method in interface nxopen.tooling.CloneObject
-
Find the part item to be cloned by giving part name
License requirements: None.
- findClonePartItemByIndex(int) - Method in interface nxopen.tooling.CloneObject
-
Find the part item to be cloned by giving index
License requirements: None.
- findClosestPoint(UFVariant, double[]) - Method in interface nxopen.uf.UFEvalsf
-
- findClosestPoint2(UFVariant, double[]) - Method in interface nxopen.uf.UFEvalsf
-
- findCompByName(UFVariant, String, String) - Method in interface nxopen.uf.UFSim
-
- findComponentPatterns() - Method in interface nxopen.assemblies.Component
-
- FindComponentPatternsData() - Constructor for class nxopen.assemblies.Component.FindComponentPatternsData
-
- findComponentsBySystemClass(int) - Method in interface nxopen.sim.KinematicConfigurator
-
- findComponentsBySystemClass(KinematicComponentBuilder.SystemClass) - Method in interface nxopen.sim.KinematicConfigurator
-
Finds component which are of the given system class
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder") OR resource_manager_nx ("Teamcenter Resource Manager")
.
- findConfiguredRev(Tag, Tag) - Method in interface nxopen.uf.UFUgmgr
-
- findConnections() - Method in interface nxopen.routing.electrical.ConnectorDevice
-
Find connections.
- findControlPoint(Point3d, double) - Method in interface nxopen.routing.ControlPointCollection
-
Finds an existing
ControlPoint
at the given ABS coordinates within
the given tolerance.
- FindCriteria - Interface in nxopen.pdm
-
Represents find criteria objects .
- FindCriteria.CriteriaData - Class in nxopen.pdm
-
- findCrosshatchFile(String) - Method in interface nxopen.annotations.HatchFillSettingsBuilder
-
Finds the crosshatch file from pattern.
- findDataset(Tag, String) - Method in interface nxopen.uf.UFClear
-
- findDecalObject(String) - Method in interface nxopen.display.DecalCollection
-
Finds the
Decal
with the given identifier as recorded in a journal.
- findEdgeInFacet(Tag, int, double[], double[]) - Method in interface nxopen.uf.UFFacet
-
- FindEdgeInFacetData() - Constructor for class nxopen.uf.UFFacet.FindEdgeInFacetData
-
- findEdgesPatch(NXObject[]) - Method in interface nxopen.tooling.EdgePatchBuilder
-
Get hole information of input edges.
- findElementIndex(CamProfileBuilder.Element) - Method in interface nxopen.mechatronics.CamProfileBuilder
-
Find the element index.
- findEquivalent() - Method in interface nxopen.motion.GraphObjectBuilder
-
Find an existing graph object that is equivalent to the request in builder
License requirements: mechanisms ("MECHANISMS")
.
- finder() - Method in interface nxopen.assemblies.SubsetBuilder
-
- findFaceHoles(Face) - Method in interface nxopen.tooling.EdgePatchBuilder
-
Find holes on the input faces.
- findFacePairs() - Method in interface nxopen.features.MidSurfaceByFacePairs
-
Get the face pair data from midsurface feature or solid body
License requirements: solid_modeling ("SOLIDS MODELING")
.
- findFaceSet(int) - Method in interface nxopen.features.OffsetSurfaceBuilder
-
- findFamilyInstance(Tag, int, boolean, boolean) - Method in interface nxopen.uf.UFPart
-
- findFeatures() - Method in interface nxopen.cam.FeatureRecognitionBuilder
-
Finds manufacturing features
License requirements: None.
- findFile(String, String) - Method in interface nxopen.uf.UF
-
- findFile(Tag, String) - Method in interface nxopen.uf.UFDirpath
-
- findFocusPlates(NXObject, double, double, double) - Method in interface nxopen.features.shipdesign.SectionDrawingBuilder
-
Returns a list of focus plates at the given position, this function just used when the
frontProximity and backProximity has the same value.
- findFocusPlates(NXObject, SectionViewBuilder.DirectionOptions, double, double, double) - Method in interface nxopen.features.shipdesign.SectionDrawingBuilder
-
Returns a list of focus plates at the given position, this function is used when user want use
different frontProximity and backProximity.
- findFocusPlates(Point3d, Vector3d, double, double) - Method in interface nxopen.features.shipdesign.SectionEditorBuilder
-
Returns a list of focus plates at the given position
License requirements: nx_ship_drafting ("Ship Drafting")
.
- findFocusPlates(Plane) - Method in interface nxopen.features.shipdesign.SectionEditorBuilder
-
Returns a list of focus plates searched and found by the given datum plane.
- findFromConnector() - Method in interface nxopen.routing.electrical.Connection
-
Get the From Connector for this connection.
- findFromConnector() - Method in interface nxopen.routing.electrical.ElectricalStockDevice
-
Find the from connector for this stock device.
- findHoles() - Method in interface nxopen.facet.FillHoleBuilder
-
Locates holes in the mesh and creates polylines around them.
- findImmedOldComps(Tag) - Method in interface nxopen.uf.UFAssem
-
- FindImmedOldCompsData() - Constructor for class nxopen.uf.UFAssem.FindImmedOldCompsData
-
- findImplementedConnection() - Method in interface nxopen.routing.electrical.ElectricalStockDevice
-
- findIn() - Method in interface nxopen.cae.DurSpecialistSuperpositionEventBuilder
-
Returns the source of search pattern.
- FindInCollaborativeDesign - Interface in nxopen.assemblies
-
FindInCollaborativeDesign is a searcher for performing simple searches in the context of a subset.
- FindInCollaborativeDesign.ObjectType - Class in nxopen.assemblies
-
The type of object for which the search is performed.
- FindInCollaborativeDesign.SearchType - Class in nxopen.assemblies
-
The attribute against which the search text is matched.
- findIndex(NamingRuleBuilder) - Method in interface nxopen.ame.NamingRuleBuilderList
-
Finds the index where the input object appears.
- findIndex(TypeMappingBuilder) - Method in interface nxopen.ame.TypeMappingBuilderList
-
Finds the index where the input object appears.
- findIndex(ArbitraryAreaSeedBuilder) - Method in interface nxopen.annotations.ArbitraryAreaSeedBuilderList
-
Finds the index where the input object appears.
- findIndex(DatumReferenceBuilder) - Method in interface nxopen.annotations.DatumReferenceBuilderList
-
Finds the index where the input object appears.
- findIndex(FeatureControlFrameDataBuilder) - Method in interface nxopen.annotations.FeatureControlFrameDataBuilderList
-
Finds the index where the input object appears.
- findIndex(FeatureControlFrameIndicatorBuilder) - Method in interface nxopen.annotations.FeatureControlFrameIndicatorBuilderList
-
Finds the index where the input object appears.
- findIndex(LeaderData) - Method in interface nxopen.annotations.LeaderDataList
-
Finds the index where the input object appears.
- findIndex(MasterSymbolListItemBuilder) - Method in interface nxopen.annotations.MasterSymbolListItemBuilderList
-
Finds the index where the input object appears.
- findIndex(SymbolCatalogParameterBuilder) - Method in interface nxopen.annotations.SymbolCatalogParameterBuilderList
-
Finds the index where the input object appears.
- findIndex(TitleBlockCellBuilder) - Method in interface nxopen.annotations.TitleBlockCellBuilderList
-
Finds the index where the input object appears.
- findIndex(Partition) - Method in interface nxopen.assemblies.PartitionList
-
Finds the index where the input object appears.
- findIndex(Body) - Method in interface nxopen.BodyList
-
Finds the index where the input object appears.
- findIndex(DependentMeshListItemBuilder) - Method in interface nxopen.cae.DependentMeshListItemBuilderList
-
Finds the index where the input object appears.
- findIndex(ManualSweepBetweenListItemSelection) - Method in interface nxopen.cae.ManualSweepBetweenListItemSelectionList
-
Finds the index where the input object appears.
- findIndex(MeshManualSweepBetweenListItemSelection) - Method in interface nxopen.cae.MeshManualSweepBetweenListItemSelectionList
-
Finds the index where the input object appears.
- findIndex(BoundaryMemberSet) - Method in interface nxopen.cam.BoundaryMemberSetList
-
Finds the index where the input object appears.
- findIndex(BoundarySet) - Method in interface nxopen.cam.BoundarySetList
-
Finds the index where the input object appears.
- findIndex(BoundaryTurnVariableStockSet) - Method in interface nxopen.cam.BoundaryTurnVariableStockSetList
-
Finds the index where the input object appears.
- findIndex(CAMFeature) - Method in interface nxopen.cam.CAMFeatureList
-
Finds the index where the input object appears.
- findIndex(CollisionPairBuilder) - Method in interface nxopen.cam.CollisionPairBuilderList
-
Finds the index where the input object appears.
- findIndex(CustomLoopSet) - Method in interface nxopen.cam.CustomLoopSetList
-
Finds the index where the input object appears.
- findIndex(CutVolume) - Method in interface nxopen.cam.CutVolumeList
-
Finds the index where the input object appears.
- findIndex(DriveChainItemBuilder) - Method in interface nxopen.cam.DriveChainItemBuilderList
-
Finds the index where the input object appears.
- findIndex(GeometrySet) - Method in interface nxopen.cam.GeometrySetList
-
Finds the index where the input object appears.
- findIndex(HoldingSystemBuilder) - Method in interface nxopen.cam.HoldingSystemBuilderList
-
Finds the index where the input object appears.
- findIndex(HoleBossSet) - Method in interface nxopen.cam.HoleBossSetList
-
Finds the index where the input object appears.
- findIndex(InPathEventDataBuilder) - Method in interface nxopen.cam.InPathEventDataBuilderList
-
Finds the index where the input object appears.
- findIndex(LaserControlPoint) - Method in interface nxopen.cam.LaserControlPointList
-
Finds the index where the input object appears.
- findIndex(ManualFeatureBuilder) - Method in interface nxopen.cam.ManualFeatureBuilderList
-
Finds the index where the input object appears.
- findIndex(Splitter) - Method in interface nxopen.cam.SplitterList
-
Finds the index where the input object appears.
- findIndex(SurfaceDriveGeometrySet) - Method in interface nxopen.cam.SurfaceDriveGeometrySetList
-
Finds the index where the input object appears.
- findIndex(TabPointDataBuilder) - Method in interface nxopen.cam.TabPointDataBuilderList
-
Finds the index where the input object appears.
- findIndex(ThreadedBossSet) - Method in interface nxopen.cam.ThreadedBossSetList
-
Finds the index where the input object appears.
- findIndex(ThreadedHoleSet) - Method in interface nxopen.cam.ThreadedHoleSetList
-
Finds the index where the input object appears.
- findIndex(ToolPathSplitItemBuilder) - Method in interface nxopen.cam.ToolPathSplitItemBuilderList
-
Finds the index where the input object appears.
- findIndex(Ude) - Method in interface nxopen.cam.UdeList
-
Finds the index where the input object appears.
- findIndex(WedmCustomBoundaryDataBuilder) - Method in interface nxopen.cam.WedmCustomBoundaryDataBuilderList
-
Finds the index where the input object appears.
- findIndex(WireGuide) - Method in interface nxopen.cam.WireGuideList
-
Finds the index where the input object appears.
- findIndex(DateItemBuilder) - Method in interface nxopen.DateItemBuilderList
-
Finds the index where the input object appears.
- findIndex(ConnectionLocationBuilder) - Method in interface nxopen.diagramming.ConnectionLocationBuilderList
-
Finds the index where the input object appears.
- findIndex(LeaderLineBuilder) - Method in interface nxopen.diagramming.LeaderLineBuilderList
-
Finds the index where the input object appears.
- findIndex(PortBuilder) - Method in interface nxopen.diagramming.PortBuilderList
-
Finds the index where the input object appears.
- findIndex(LineTypeBuilder) - Method in interface nxopen.diagramminglibraryauthor.LineTypeBuilderList
-
Finds the index where the input object appears.
- findIndex(DieAssistantFlangeProfile) - Method in interface nxopen.die.DieAssistantFlangeProfileList
-
Finds the index where the input object appears.
- findIndex(DieAssistantTrimProfile) - Method in interface nxopen.die.DieAssistantTrimProfileList
-
Finds the index where the input object appears.
- findIndex(DieBooleanBuilder) - Method in interface nxopen.die.DieBooleanBuilderList
-
Finds the index where the input object appears.
- findIndex(DieLimitsBuilder) - Method in interface nxopen.die.DieLimitsBuilderList
-
Finds the index where the input object appears.
- findIndex(DieLocationBuilder) - Method in interface nxopen.die.DieLocationBuilderList
-
Finds the index where the input object appears.
- findIndex(DrawBeadSegmentBuilder) - Method in interface nxopen.die.DrawBeadSegmentBuilderList
-
Finds the index where the input object appears.
- findIndex(PierceItemBuilder) - Method in interface nxopen.die.PierceItemBuilderList
-
Finds the index where the input object appears.
- findIndex(PointCloudClippingBoxesListItemBuilder) - Method in interface nxopen.display.PointCloudClippingBoxesListItemBuilderList
-
Finds the index where the input object appears.
- findIndex(AttributeItemBuilder) - Method in interface nxopen.drafting.AttributeItemBuilderList
-
Finds the index where the input object appears.
- findIndex(PrimaryContentItemBuilder) - Method in interface nxopen.drafting.PrimaryContentItemBuilderList
-
Finds the index where the input object appears.
- findIndex(SectionLineSegmentBuilder) - Method in interface nxopen.drawings.SectionLineSegmentBuilderList
-
Finds the index where the input object appears.
- findIndex(ShipDraftingViewLinesBuilder) - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilderList
-
Finds the index where the input object appears.
- findIndex(ViewStyleShipbuildingLinesBuilder) - Method in interface nxopen.drawings.ViewStyleShipbuildingLinesBuilderList
-
Finds the index where the input object appears.
- findIndex(ExpressionCollectorSet) - Method in interface nxopen.ExpressionCollectorSetList
-
Finds the index where the input object appears.
- findIndex(ExpressionSectionSet) - Method in interface nxopen.ExpressionSectionSetList
-
Finds the index where the input object appears.
- findIndex(Feature) - Method in interface nxopen.features.FeatureList
-
Finds the index where the input object appears.
- findIndex(GlobalShapingCurveOffsetBuilder) - Method in interface nxopen.features.GlobalShapingCurveOffsetBuilderList
-
Finds the index where the input object appears.
- findIndex(GlobalShapingPointOffsetBuilder) - Method in interface nxopen.features.GlobalShapingPointOffsetBuilderList
-
Finds the index where the input object appears.
- findIndex(PartGeometryCopySelectBuilder) - Method in interface nxopen.features.PartGeometryCopySelectBuilderList
-
Finds the index where the input object appears.
- findIndex(PointSetFacePercentageBuilder) - Method in interface nxopen.features.PointSetFacePercentageBuilderList
-
Finds the index where the input object appears.
- findIndex(RegionListItemBuilder) - Method in interface nxopen.features.RegionListItemBuilderList
-
Finds the index where the input object appears.
- findIndex(BendListItemBuilder) - Method in interface nxopen.features.sheetmetal.BendListItemBuilderList
-
Finds the index where the input object appears.
- findIndex(ConvertInputListItemBuilder) - Method in interface nxopen.features.sheetmetal.ConvertInputListItemBuilderList
-
Finds the index where the input object appears.
- findIndex(FeatureBendPropertiesBuilder) - Method in interface nxopen.features.sheetmetal.FeatureBendPropertiesBuilderList
-
Finds the index where the input object appears.
- findIndex(JoggleInputListItemBuilder) - Method in interface nxopen.features.sheetmetal.JoggleInputListItemBuilderList
-
Finds the index where the input object appears.
- findIndex(SMBoundaryConditionBuilder) - Method in interface nxopen.features.sheetmetal.SMBoundaryConditionBuilderList
-
Finds the index where the input object appears.
- findIndex(AnchorPoint) - Method in interface nxopen.features.shipdesign.AnchorPointList
-
Finds the index where the input object appears.
- findIndex(BulkHeadListItemBuilder) - Method in interface nxopen.features.shipdesign.BulkHeadListItemBuilderList
-
Finds the index where the input object appears.
- findIndex(CornerCutListItemBuilder) - Method in interface nxopen.features.shipdesign.CornerCutListItemBuilderList
-
Finds the index where the input object appears.
- findIndex(DeckListItemBuilder) - Method in interface nxopen.features.shipdesign.DeckListItemBuilderList
-
Finds the index where the input object appears.
- findIndex(DrawingPartBuilder) - Method in interface nxopen.features.shipdesign.DrawingPartBuilderList
-
Finds the index where the input object appears.
- findIndex(DrawingSheetBuilder) - Method in interface nxopen.features.shipdesign.DrawingSheetBuilderList
-
Finds the index where the input object appears.
- findIndex(ItFrameListItemBuilder) - Method in interface nxopen.features.shipdesign.ItFrameListItemBuilderList
-
Finds the index where the input object appears.
- findIndex(OrientationRegionItemBuilder) - Method in interface nxopen.features.shipdesign.OrientationRegionItemBuilderList
-
Finds the index where the input object appears.
- findIndex(PlaneListBuilder) - Method in interface nxopen.features.shipdesign.PlaneListBuilderList
-
Finds the index where the input object appears.
- findIndex(PlateBoundaryOptionBuilder) - Method in interface nxopen.features.shipdesign.PlateBoundaryOptionBuilderList
-
Finds the index where the input object appears.
- findIndex(SeamBlockBuilder) - Method in interface nxopen.features.shipdesign.SeamBlockBuilderList
-
Finds the index where the input object appears.
- findIndex(SectionViewBuilder) - Method in interface nxopen.features.shipdesign.SectionViewBuilderList
-
Finds the index where the input object appears.
- findIndex(ShipNamesBuilder) - Method in interface nxopen.features.shipdesign.ShipNamesBuilderList
-
Finds the index where the input object appears.
- findIndex(StandardPartItemBuilder) - Method in interface nxopen.features.shipdesign.StandardPartItemBuilderList
-
Finds the index where the input object appears.
- findIndex(SteelInsulationBoundaryBuilder) - Method in interface nxopen.features.shipdesign.SteelInsulationBoundaryBuilderList
-
Finds the index where the input object appears.
- findIndex(SubSystemBuilder) - Method in interface nxopen.features.shipdesign.SubSystemBuilderList
-
Finds the index where the input object appears.
- findIndex(TransFrameListItemBuilder) - Method in interface nxopen.features.shipdesign.TransFrameListItemBuilderList
-
Finds the index where the input object appears.
- findIndex(SmoothRangeBuilder) - Method in interface nxopen.features.SmoothRangeBuilderList
-
Finds the index where the input object appears.
- findIndex(CageSectionData) - Method in interface nxopen.features.subdivision.CageSectionDataList
-
Finds the index where the input object appears.
- findIndex(VariableRadiusPointsBuilder) - Method in interface nxopen.features.VariableRadiusPointsBuilderList
-
Finds the index where the input object appears.
- findIndex(CloseRangeCameraListItemBuilder) - Method in interface nxopen.features.vehicledesign.CloseRangeCameraListItemBuilderList
-
Finds the index where the input object appears.
- findIndex(CloseRangeDemoCylinderListItemBuilder) - Method in interface nxopen.features.vehicledesign.CloseRangeDemoCylinderListItemBuilderList
-
Finds the index where the input object appears.
- findIndex(PathObjects) - Method in interface nxopen.fields.PathObjectsList
-
Finds the index where the input object appears.
- findIndex(BlendSetbackBuilder) - Method in interface nxopen.geometricutilities.BlendSetbackBuilderList
-
Finds the index where the input object appears.
- findIndex(BoundaryDefinitionBuilder) - Method in interface nxopen.geometricutilities.BoundaryDefinitionBuilderList
-
Finds the index where the input object appears.
- findIndex(BoundingObjectBuilder) - Method in interface nxopen.geometricutilities.BoundingObjectBuilderList
-
Finds the index where the input object appears.
- findIndex(EntityUsageInfo) - Method in interface nxopen.geometricutilities.EntityUsageInfoList
-
Finds the index where the input object appears.
- findIndex(FaceSetOffset) - Method in interface nxopen.geometricutilities.FaceSetOffsetList
-
Finds the index where the input object appears.
- findIndex(FtmFixedCurvesBuilder) - Method in interface nxopen.geometricutilities.FtmFixedCurvesBuilderList
-
Finds the index where the input object appears.
- findIndex(FtmTransformCurvesBuilder) - Method in interface nxopen.geometricutilities.FtmTransformCurvesBuilderList
-
Finds the index where the input object appears.
- findIndex(FtmTransformPointsBuilder) - Method in interface nxopen.geometricutilities.FtmTransformPointsBuilderList
-
Finds the index where the input object appears.
- findIndex(InstanceEditedExpressionItem) - Method in interface nxopen.geometricutilities.InstanceEditedExpressionItemList
-
Finds the index where the input object appears.
- findIndex(ParentEquivalencyMap) - Method in interface nxopen.geometricutilities.ParentEquivalencyMapList
-
Finds the index where the input object appears.
- findIndex(PatternIncrementItem) - Method in interface nxopen.geometricutilities.PatternIncrementItemList
-
Finds the index where the input object appears.
- findIndex(PatternSpacingsListItem) - Method in interface nxopen.geometricutilities.PatternSpacingsListItemList
-
Finds the index where the input object appears.
- findIndex(ReduceSurfaceRadiusFaceGroupBuilder) - Method in interface nxopen.geometricutilities.ReduceSurfaceRadiusFaceGroupBuilderList
-
Finds the index where the input object appears.
- findIndex(RotationSetBuilder) - Method in interface nxopen.geometricutilities.RotationSetBuilderList
-
Finds the index where the input object appears.
- findIndex(ScalingSetBuilder) - Method in interface nxopen.geometricutilities.ScalingSetBuilderList
-
Finds the index where the input object appears.
- findIndex(SelectionList) - Method in interface nxopen.geometricutilities.SelectionListList
-
Finds the index where the input object appears.
- findIndex(SpinePlaneBuilder) - Method in interface nxopen.geometricutilities.SpinePlaneBuilderList
-
Finds the index where the input object appears.
- findIndex(StyledSweepDoubleOnPathDimBuilder) - Method in interface nxopen.geometricutilities.StyledSweepDoubleOnPathDimBuilderList
-
Finds the index where the input object appears.
- findIndex(TransitionCurveBuilder) - Method in interface nxopen.geometricutilities.TransitionCurveBuilderList
-
Finds the index where the input object appears.
- findIndex(TransitionLawNodeBuilder) - Method in interface nxopen.geometricutilities.TransitionLawNodeBuilderList
-
Finds the index where the input object appears.
- findIndex(TrimCurveBoundingObjectBuilder) - Method in interface nxopen.geometricutilities.TrimCurveBoundingObjectBuilderList
-
Finds the index where the input object appears.
- findIndex(TwoExpressionsCollectorSet) - Method in interface nxopen.geometricutilities.TwoExpressionsCollectorSetList
-
Finds the index where the input object appears.
- findIndex(TwoExpressionsSectionSet) - Method in interface nxopen.geometricutilities.TwoExpressionsSectionSetList
-
Finds the index where the input object appears.
- findIndex(ListCreator) - Method in interface nxopen.ListCreatorList
-
Finds the index where the input object appears.
- findIndex(PathTransitionBuilder) - Method in interface nxopen.mechanicalrouting.PathTransitionBuilderList
-
Finds the index where the input object appears.
- findIndex(ExternalConnectionElementBuilder) - Method in interface nxopen.mechatronics.ExternalConnectionElementBuilderList
-
Finds the index where the input object appears.
- findIndex(GanttOperationConditionBuilder) - Method in interface nxopen.mechatronics.GanttOperationConditionBuilderList
-
Finds the index where the input object appears.
- findIndex(GanttOperationParameterBuilder) - Method in interface nxopen.mechatronics.GanttOperationParameterBuilderList
-
Finds the index where the input object appears.
- findIndex(MATLABSignalConnectionBuilder) - Method in interface nxopen.mechatronics.MATLABSignalConnectionBuilderList
-
Finds the index where the input object appears.
- findIndex(PathConstraintFrameBuilder) - Method in interface nxopen.mechatronics.PathConstraintFrameBuilderList
-
Finds the index where the input object appears.
- findIndex(ProxyObjectParameterBuilder) - Method in interface nxopen.mechatronics.ProxyObjectParameterBuilderList
-
Finds the index where the input object appears.
- findIndex(RuntimeFormulaParameterBuilder) - Method in interface nxopen.mechatronics.RuntimeFormulaParameterBuilderList
-
Finds the index where the input object appears.
- findIndex(SensorsActuatorsListBuilder) - Method in interface nxopen.mechatronics.SensorsActuatorsListBuilderList
-
Finds the index where the input object appears.
- findIndex(SHMSignalConnectionBuilder) - Method in interface nxopen.mechatronics.SHMSignalConnectionBuilderList
-
Finds the index where the input object appears.
- findIndex(SignalConnectionBuilder) - Method in interface nxopen.mechatronics.SignalConnectionBuilderList
-
Finds the index where the input object appears.
- findIndex(SignalMappingConnectionBuilder) - Method in interface nxopen.mechatronics.SignalMappingConnectionBuilderList
-
Finds the index where the input object appears.
- findIndex(ModelingView) - Method in interface nxopen.ModelingViewList
-
Finds the index where the input object appears.
- findIndex(ConfigurationParameter) - Method in interface nxopen.motion.ConfigurationParameterList
-
Finds the index where the input object appears.
- findIndex(ControlInputPortBuilder) - Method in interface nxopen.motion.ControlInputPortBuilderList
-
Finds the index where the input object appears.
- findIndex(InputPortAssociation) - Method in interface nxopen.motion.InputPortAssociationList
-
Finds the index where the input object appears.
- findIndex(OutputPortAssociation) - Method in interface nxopen.motion.OutputPortAssociationList
-
Finds the index where the input object appears.
- findIndex(PortVariable) - Method in interface nxopen.motion.PortVariableList
-
Finds the index where the input object appears.
- findIndex(SegmentBuilder) - Method in interface nxopen.motion.SegmentBuilderList
-
Finds the index where the input object appears.
- findIndex(SignalChartListItem) - Method in interface nxopen.motion.SignalChartListItemList
-
Finds the index where the input object appears.
- findIndex(NXObject) - Method in interface nxopen.NXObjectList
-
Finds the index where the input object appears.
- findIndex(TaggedObject) - Method in interface nxopen.ObjectList
-
Finds the index where the input object appears.
- findIndex(Plane) - Method in interface nxopen.PlaneList
-
Finds the index where the input object appears.
- findIndex(Point) - Method in interface nxopen.PointList
-
Finds the index where the input object appears.
- findIndex(HydraulicLifterBuilder) - Method in interface nxopen.presslinesimulation.HydraulicLifterBuilderList
-
Finds the index where the input object appears.
- findIndex(LinearCamBuilder) - Method in interface nxopen.presslinesimulation.LinearCamBuilderList
-
Finds the index where the input object appears.
- findIndex(MachineAdjustmentBuilder) - Method in interface nxopen.presslinesimulation.MachineAdjustmentBuilderList
-
Finds the index where the input object appears.
- findIndex(MountPointBuilder) - Method in interface nxopen.presslinesimulation.MountPointBuilderList
-
Finds the index where the input object appears.
- findIndex(RotaryCamBuilder) - Method in interface nxopen.presslinesimulation.RotaryCamBuilderList
-
Finds the index where the input object appears.
- findIndex(UserMotionBuilder) - Method in interface nxopen.presslinesimulation.UserMotionBuilderList
-
Finds the index where the input object appears.
- findIndex(RegionPoint) - Method in interface nxopen.RegionPointList
-
Finds the index where the input object appears.
- findIndex(RunItemsBuilder) - Method in interface nxopen.routing.RunItemsBuilderList
-
Finds the index where the input object appears.
- findIndex(ScCollector) - Method in interface nxopen.ScCollectorList
-
Finds the index where the input object appears.
- findIndex(Section) - Method in interface nxopen.SectionList
-
Finds the index where the input object appears.
- findIndex(KinematicChain) - Method in interface nxopen.sim.KinematicChainList
-
Finds the index where the input object appears.
- findIndex(KinematicChannelBuilder) - Method in interface nxopen.sim.KinematicChannelBuilderList
-
Finds the index where the input object appears.
- findIndex(KinematicJunctionBuilder) - Method in interface nxopen.sim.KinematicJunctionBuilderList
-
Finds the index where the input object appears.
- findIndex(TaggedObject) - Method in interface nxopen.TaggedObjectList
-
Finds the index where the input object appears.
- findIndex(SelectReuseLibraryListItemBuilder) - Method in interface nxopen.tooling.SelectReuseLibraryListItemBuilderList
-
Finds the index where the input object appears.
- findIndex(ShimInnerProfileSetBuilder) - Method in interface nxopen.tooling.ShimInnerProfileSetBuilderList
-
Finds the index where the input object appears.
- findIndex(JointItemBuilder) - Method in interface nxopen.weld.JointItemBuilderList
-
Finds the index where the input object appears.
- findIndex(JointmarkFaceSetsBuilder) - Method in interface nxopen.weld.JointmarkFaceSetsBuilderList
-
Finds the index where the input object appears.
- findIndex(JointmarkGuideBuilder) - Method in interface nxopen.weld.JointmarkGuideBuilderList
-
Finds the index where the input object appears.
- findIndex(JointmarkPointsBuilder) - Method in interface nxopen.weld.JointmarkPointsBuilderList
-
Finds the index where the input object appears.
- findIndex(WeldBeadPathBuilder) - Method in interface nxopen.weld.WeldBeadPathBuilderList
-
Finds the index where the input object appears.
- findIndex(WeldBeadSizeBuilder) - Method in interface nxopen.weld.WeldBeadSizeBuilderList
-
Finds the index where the input object appears.
- findIndex(WeldFillStripBuilder) - Method in interface nxopen.weld.WeldFillStripBuilderList
-
Finds the index where the input object appears.
- findIntersectingParts() - Method in interface nxopen.features.shipdesign.ManufacturingPreparationBuilder
-
The design parts that intersect the manufacturing collector
License requirements: None.
- findIntersection() - Method in interface nxopen.tooling.PocketBuilder
-
Finds the intersected components to create pocket
License requirements: None.
- findItem(int) - Method in interface nxopen.ame.NamingRuleBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.ame.TypeMappingBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.annotations.ArbitraryAreaSeedBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.annotations.DatumReferenceBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.annotations.FeatureControlFrameDataBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.annotations.FeatureControlFrameIndicatorBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.annotations.LeaderDataList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.annotations.MasterSymbolListItemBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.annotations.SymbolCatalogParameterBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.annotations.TitleBlockCellBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.assemblies.PartitionList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.BodyList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.cae.DependentMeshListItemBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.cae.ManualSweepBetweenListItemSelectionList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.cae.MeshManualSweepBetweenListItemSelectionList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.cam.BoundaryMemberSetList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.cam.BoundarySetList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.cam.BoundaryTurnVariableStockSetList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.cam.CAMFeatureList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.cam.CollisionPairBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.cam.CustomLoopSetList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.cam.CutVolumeList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.cam.DriveChainItemBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.cam.GeometrySetList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.cam.HoldingSystemBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.cam.HoleBossSetList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.cam.InPathEventDataBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.cam.LaserControlPointList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.cam.ManualFeatureBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.cam.SplitterList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.cam.SurfaceDriveGeometrySetList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.cam.TabPointDataBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.cam.ThreadedBossSetList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.cam.ThreadedHoleSetList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.cam.ToolPathSplitItemBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.cam.UdeList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.cam.WedmCustomBoundaryDataBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.cam.WireGuideList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.DateItemBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.diagramming.ConnectionLocationBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.diagramming.LeaderLineBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.diagramming.PortBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.diagramminglibraryauthor.LineTypeBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.die.DieAssistantFlangeProfileList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.die.DieAssistantTrimProfileList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.die.DieBooleanBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.die.DieLimitsBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.die.DieLocationBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.die.DrawBeadSegmentBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.die.PierceItemBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.display.PointCloudClippingBoxesListItemBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.drafting.AttributeItemBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.drafting.PrimaryContentItemBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.drawings.SectionLineSegmentBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.drawings.SectionLineSegmentPointListBuilder
-
- findItem(int) - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.drawings.ViewStyleShipbuildingLinesBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.ExpressionCollectorSetList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.ExpressionSectionSetList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.features.FeatureList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.features.GeometricConstraintDataManager
-
- findItem(int) - Method in interface nxopen.features.GlobalShapingCurveOffsetBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.features.GlobalShapingPointOffsetBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.features.PartGeometryCopySelectBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.features.PointSetFacePercentageBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.features.RegionListItemBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.features.sheetmetal.BendListItemBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.features.sheetmetal.ConvertInputListItemBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.features.sheetmetal.FeatureBendPropertiesBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.features.sheetmetal.JoggleInputListItemBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.features.sheetmetal.SMBoundaryConditionBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.features.shipdesign.AnchorPointList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.features.shipdesign.BulkHeadListItemBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.features.shipdesign.CornerCutListItemBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.features.shipdesign.DeckListItemBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.features.shipdesign.DrawingPartBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.features.shipdesign.DrawingSheetBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.features.shipdesign.ItFrameListItemBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.features.shipdesign.OrientationRegionItemBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.features.shipdesign.PlaneListBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.features.shipdesign.PlateBoundaryOptionBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.features.shipdesign.SeamBlockBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.features.shipdesign.SectionViewBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.features.shipdesign.ShipNamesBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.features.shipdesign.StandardPartItemBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.features.shipdesign.SteelInsulationBoundaryBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.features.shipdesign.SubSystemBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.features.shipdesign.TransFrameListItemBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.features.SmoothRangeBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.features.subdivision.CageSectionDataList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.features.VariableRadiusPointsBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.features.vehicledesign.CloseRangeCameraListItemBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.features.vehicledesign.CloseRangeDemoCylinderListItemBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.fields.PathObjectsList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.geometricutilities.BlendSetbackBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.geometricutilities.BoundaryDefinitionBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.geometricutilities.BoundingObjectBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.geometricutilities.EntityUsageInfoList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.geometricutilities.FaceSetOffsetList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.geometricutilities.FtmFixedCurvesBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.geometricutilities.FtmTransformCurvesBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.geometricutilities.FtmTransformPointsBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.geometricutilities.InstanceEditedExpressionItemList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.geometricutilities.ParentEquivalencyMapList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.geometricutilities.PatternIncrementItemList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.geometricutilities.PatternSpacingsListItemList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.geometricutilities.ReduceSurfaceRadiusFaceGroupBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.geometricutilities.RotationSetBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.geometricutilities.ScalingSetBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.geometricutilities.SelectionListList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.geometricutilities.SpinePlaneBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.geometricutilities.StyledSweepDoubleOnPathDimBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.geometricutilities.TransitionCurveBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.geometricutilities.TransitionLawNodeBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.geometricutilities.TrimCurveBoundingObjectBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.geometricutilities.TwoExpressionsCollectorSetList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.geometricutilities.TwoExpressionsSectionSetList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.ListCreatorList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.mechanicalrouting.PathTransitionBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.mechatronics.ExternalConnectionElementBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.mechatronics.GanttOperationConditionBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.mechatronics.GanttOperationParameterBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.mechatronics.MATLABSignalConnectionBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.mechatronics.PathConstraintFrameBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.mechatronics.ProxyObjectParameterBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.mechatronics.RuntimeFormulaParameterBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.mechatronics.SensorsActuatorsListBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.mechatronics.SHMSignalConnectionBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.mechatronics.SignalConnectionBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.mechatronics.SignalMappingConnectionBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.ModelingViewList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.motion.ConfigurationParameterList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.motion.ControlInputPortBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.motion.InputPortAssociationList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.motion.OutputPortAssociationList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.motion.PortVariableList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.motion.SegmentBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.motion.SignalChartListItemList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.NXObjectList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.ObjectList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.PlaneList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.PointList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.presslinesimulation.HydraulicLifterBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.presslinesimulation.LinearCamBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.presslinesimulation.MachineAdjustmentBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.presslinesimulation.MountPointBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.presslinesimulation.RotaryCamBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.presslinesimulation.UserMotionBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.RegionPointList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.routing.RunItemsBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.ScCollectorList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.SectionList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.sim.KinematicChainList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.sim.KinematicChannelBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.sim.KinematicJunctionBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.TaggedObjectList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.tooling.SelectReuseLibraryListItemBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.tooling.ShimInnerProfileSetBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.weld.JointItemBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.weld.JointmarkFaceSetsBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.weld.JointmarkGuideBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.weld.JointmarkPointsBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.weld.WeldBeadPathBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.weld.WeldBeadSizeBuilderList
-
Returns the object at the input index.
- findItem(int) - Method in interface nxopen.weld.WeldFillStripBuilderList
-
Returns the object at the input index.
- findJunction(String) - Method in interface nxopen.sim.KinematicConfigurator
-
Find the junction with the given name
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- findJunction(NXObject) - Method in interface nxopen.sim.KinematicConfigurator
-
Finds a junction by its coordinate system
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- findLinkedBodyFeatureAndSource(String, String) - Method in interface nxopen.tooling.SplitInsertBuilder
-
Find linked body feature and source object.
- findLinkedBodyFeatureAndSourceForAll() - Method in interface nxopen.tooling.SplitInsertBuilder
-
Find linked body feature and source object.
- findMachineAxis(String) - Method in interface nxopen.sim.KinematicModel
-
Find the machine axis with the given name.
- findMapping() - Method in interface nxopen.formboard.UpdateFormboardBuilder
-
Compute the mapping between the data in the formboard and the data in the
3D harness.
- findMatchingParts() - Method in interface nxopen.routing.electrical.ConnectorDevice
-
Find parts matching the connector device.
- findMesh(Tag, UFSf.MeshDimension) - Method in interface nxopen.uf.UFSf
-
- FindMeshData() - Constructor for class nxopen.uf.UFSf.FindMeshData
-
- findMinimumDistance(Tag, Tag) - Method in interface nxopen.uf.UFSf
-
- FindMinimumDistanceData() - Constructor for class nxopen.uf.UFSf.FindMinimumDistanceData
-
- findMoldFeatures() - Method in interface nxopen.tooling.MoldFeatureRecognitionBuilder
-
Find and collect molding features
License requirements: None.
- findMoldUnsplitFace() - Method in interface nxopen.tooling.FaceSplitBuilder
-
Set the reference point to the selected face center.
- findNamedReachZone(String) - Method in interface nxopen.features.Human
-
Find
HumanReachZone
in a human feature by reach zone name
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
Created in NX4.0.0
- findNearestCableDevice() - Method in interface nxopen.routing.electrical.Connection
-
Query this connection to find the nearest harness.
- findNearestCableDevice() - Method in interface nxopen.routing.electrical.ConnectorDevice
-
Get the nearest
CableDevice
encountered up the parent-child hierarchy.
- findNearestHarnessDefinition() - Method in interface nxopen.routing.electrical.ElectricalStockDevice
-
- findNearestHarnessDevice() - Method in interface nxopen.routing.electrical.Connection
-
Query this connection to find the nearest harness.
- findNearestHarnessDevice() - Method in interface nxopen.routing.electrical.ConnectorDevice
-
Get the nearest
HarnessDevice
encountered up the parent-child hierarchy.
- findNearestHarnessDevice() - Method in interface nxopen.routing.electrical.ElectricalStockDevice
-
Find the nearest
HarnessDevice
encountered up the parent-child hierarchy.
- findNearestParentDevice() - Method in interface nxopen.routing.electrical.Connection
-
Queries this connection for the nearest parent device.
- findNumberOfInterferenceRegions() - Method in interface nxopen.weld.AutoPointBuilder
-
Finds all the interference areas between the selected components.
- findObject(String) - Method in interface nxopen.annotations.BendTableCollection
-
Finds the bend table with the given name.
- findObject(String) - Method in interface nxopen.annotations.BusinessModifierCollection
-
- findObject(String) - Method in interface nxopen.annotations.CenterlineCollection
-
Finds the Centerline with the given name.
- findObject(String) - Method in interface nxopen.annotations.CustomSymbolCollection
-
- findObject(String) - Method in interface nxopen.annotations.DraftingDatumTargetCollection
-
Finds the drafting datum target with the given name.
- findObject(String) - Method in interface nxopen.annotations.DraftingImageCollection
-
Finds the drafting image with the given name.
- findObject(String) - Method in interface nxopen.annotations.DraftingSurfaceFinishCollection
-
Finds the drafting surface finish with the given name.
- findObject(String) - Method in interface nxopen.annotations.FrameBarCollection
-
Finds the frame bar with the given name.
- findObject(String) - Method in interface nxopen.annotations.HoleTableCollection
-
Finds the hole table with the given name.
- findObject(String) - Method in interface nxopen.annotations.IntersectionSymbolCollection
-
Finds the intersection symbol with the given name.
- findObject(String) - Method in interface nxopen.annotations.OffsetCenterPointCollection
-
Finds the offset center point with the given name.
- findObject(String) - Method in interface nxopen.annotations.PartSymbolFolderCollection
-
- findObject(String) - Method in interface nxopen.annotations.PmiAttributeCollection
-
Finds the
PmiAttribute
with the given identifier as recorded in a journal.
- findObject(String) - Method in interface nxopen.annotations.PmiLightweightSectionCollection
-
Finds the lightweight section with the given name.
- findObject(String) - Method in interface nxopen.annotations.PmiTableSectionCollection
-
Finds the PMI table section with the given name.
- findObject(String) - Method in interface nxopen.annotations.SymbolFileCollection
-
- findObject(String) - Method in interface nxopen.annotations.TableCollection
-
Finds the table with the given name.
- findObject(String) - Method in interface nxopen.annotations.TableSectionCollection
-
Finds the table section with the given name.
- findObject(String) - Method in interface nxopen.annotations.TargetPointCollection
-
Finds the target point with the given name.
- findObject(String) - Method in interface nxopen.ArcCollection
-
Finds the
Arc
with the given identifier as recorded in a journal.
- findObject(String) - Method in interface nxopen.assemblies.ArrangementCollection
-
Finds the
Arrangement
with the given identifier as recorded in a journal.
- findObject(String) - Method in interface nxopen.assemblies.ClearanceSetCollection
-
Finds the
ClearanceSet
with the given identifier as recorded in a journal.
- findObject(String) - Method in interface nxopen.assemblies.ComponentGroupCollection
-
Finds the
ComponentGroup
with the given identifier as recorded in a journal.
- findObject(String) - Method in interface nxopen.assemblies.ComponentPatternCollection
-
- findObject(String) - Method in interface nxopen.assemblies.DrawingExplosionCollection
-
- findObject(String) - Method in interface nxopen.assemblies.ExplosionCollection
-
Finds the
Explosion
with the given identifier as recorded in a journal.
- findObject(String) - Method in interface nxopen.assemblies.OrderCollection
-
Finds the
Order
with the given identifier as recorded in a journal.
- findObject(String) - Method in interface nxopen.assemblies.productinterface.Collection
-
Find the Product Interface Object with input name
License requirements: None.
- findObject(String) - Method in interface nxopen.assemblies.SearchResultCollection
-
- findObject(String) - Method in interface nxopen.assemblies.SubsetBuilder
-
Finds the
NXObject
with the given identifier as recorded in a journal.
- findObject(String) - Method in interface nxopen.assemblies.SubsetRecipe
-
Finds the
SearchTerm
with the given identifier as recorded in a journal.
- findObject(String) - Method in interface nxopen.BodyCollection
-
Finds the
Body
with the given identifier as recorded in a journal.
- findObject(String) - Method in interface nxopen.cae.AdaptivityExclusionZoneCollection
-
Finds a adaptivity meta solution with a specified name.
- findObject(String) - Method in interface nxopen.cae.AdaptivityMetaSolutionCollection
-
Finds an adaptivity meta solution with a specified name.
- findObject(String) - Method in interface nxopen.cae.aerostructures.LoadCaseCollection
-
Finds the
LoadCase
object with the given name.
- findObject(String) - Method in interface nxopen.cae.aerostructures.LoadCaseSetCollection
-
- findObject(String) - Method in interface nxopen.cae.aerostructures.MarginCalculationCollection
-
- findObject(String) - Method in interface nxopen.cae.aerostructures.MarginSolutionCollection
-
Finds a AeroStruct margin solution with a specified name.
- findObject(String) - Method in interface nxopen.cae.BeamSectionCollection
-
Finds the
BeamSection
with the given identifier as recorded in a journal.
- findObject(String) - Method in interface nxopen.cae.BoltCollection
-
Finds the
Bolt
with the given identifier as recorded in a journal.
- findObject(String) - Method in interface nxopen.cae.CAEConnectionCollection
-
Finds the
CAEConnection
with the given identifier as recorded in a journal.
- findObject(String) - Method in interface nxopen.cae.CaeDOFSetCollection
-
Finds the
CaeDOFSet
with the given identifier as recorded in a journal.
- findObject(String) - Method in interface nxopen.cae.CaeGroupCollection
-
Finds the
CaeGroup
with the given identifier as recorded in a journal.
- findObject(String) - Method in interface nxopen.cae.CaeRegionCollection
-
Finds the
CaeRegion
with the given identifier as recorded in a journal.
- findObject(String) - Method in interface nxopen.cae.CfdAutoRefinementConstraintCollection
-
- findObject(String) - Method in interface nxopen.cae.CfdContactPreventionConstraintCollection
-
- findObject(String) - Method in interface nxopen.cae.CfdLocalResolutionConstraintCollection
-
- findObject(String) - Method in interface nxopen.cae.CorrelSolutionCollection
-
Finds a correl meta solution with specified solution name
License requirements: None.
- findObject(String) - Method in interface nxopen.cae.DataProcessingBlockCollection
-
Finds a block with a specified name.
- findObject(String) - Method in interface nxopen.cae.DataProcessingCollection
-
Finds an dpm meta solution with a specified name.
- findObject(String) - Method in interface nxopen.cae.DataSourceCollection
-
- findObject(String) - Method in interface nxopen.cae.DurabilityAxisSearchCollection
-
Finds an stress axes with a specified name.
- findObject(String) - Method in interface nxopen.cae.DurabilityEventCollection
-
Finds a durability event with a specified name.
- findObject(String) - Method in interface nxopen.cae.DurabilityExcitationCollection
-
Finds a durability excitation with a specified name.
- findObject(String) - Method in interface nxopen.cae.DurabilityFatigueCollection
-
Finds an event fatigue settings with a specified name.
- findObject(String) - Method in interface nxopen.cae.DurabilityMetaSolutionCollection
-
Finds a durability meta solution with a specified name.
- findObject(String) - Method in interface nxopen.cae.DurabilityRandomFatigueCollection
-
Finds an event fatigue settings with a specified name.
- findObject(String) - Method in interface nxopen.cae.DurabilitySolveOptionsCollection
-
Finds an event override with a specified name.
- findObject(String) - Method in interface nxopen.cae.DurabilityStrengthCollection
-
Finds an event strength settings with a specified name.
- findObject(String) - Method in interface nxopen.cae.DurSpecialistAnalysisTypeCollection
-
- findObject(String) - Method in interface nxopen.cae.DurSpecialistLoadProviderCollection
-
- findObject(String) - Method in interface nxopen.cae.DurSpecialistLocalDefinitionCollection
-
- findObject(String) - Method in interface nxopen.cae.DurSpecialistSolutionCollection
-
- findObject(String) - Method in interface nxopen.cae.FluidDomainCollection
-
- findObject(String) - Method in interface nxopen.cae.FunctionCollection
-
- findObject(String) - Method in interface nxopen.cae.GeometryRecipeCollection
-
Finds the
GeometryRecipe
with the given identifier as recorded in a journal.
- findObject(String) - Method in interface nxopen.cae.IMeshManager
-
Finds the
Mesh
with the given identifier as recorded in a journal.
- findObject(String) - Method in interface nxopen.cae.LaminateDynamicEventCollection
-
Finds a laminate dynamic event with the specified name
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- findObject(String) - Method in interface nxopen.cae.LaminateDynamicSimCollection
-
Finds a laminate dynamic sim with the specified name
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- findObject(String) - Method in interface nxopen.cae.LaminateExtrudeSetupCollection
-
- findObject(String) - Method in interface nxopen.cae.LaminateGlobalLayupCollection
-
- findObject(String) - Method in interface nxopen.cae.LaminateGlobalLayupPlyGroupCollection
-
- findObject(String) - Method in interface nxopen.cae.LaminateGraphicalReportCollection
-
Finds a laminate graphical post report with the specified name
License requirements: nx_lam_composites ("Laminate Composites")
.
- findObject(String) - Method in interface nxopen.cae.LaminateLayupOffsetCollection
-
- findObject(String) - Method in interface nxopen.cae.LaminateMatOrientationCollection
-
- findObject(String) - Method in interface nxopen.cae.LaminateModePropertyCollection
-
Finds a laminate mode property with the specified name
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- findObject(String) - Method in interface nxopen.cae.LaminatePlyCollection
-
Finds the
LaminatePly
with the given identifier as recorded in a journal.
- findObject(String) - Method in interface nxopen.cae.LaminatePostReportCollection
-
Finds a laminate post report with the specified name
License requirements: nx_lam_composites ("Laminate Composites")
.
- findObject(String) - Method in interface nxopen.cae.LaminateQuickReportCollection
-
Finds a laminate Quick post report with the specified name
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- findObject(String) - Method in interface nxopen.cae.LaminateSpreadsheetReportCollection
-
Finds a laminate spreadsheet post report with the specified name
License requirements: nx_lam_composites ("Laminate Composites")
.
- findObject(String) - Method in interface nxopen.cae.MeshControlCollection
-
Finds the
Mesh
with the given identifier as recorded in a journal.
- findObject(String) - Method in interface nxopen.cae.MeshPointCollection
-
Finds the
MeshPoint
with the given identifier as recorded in a journal.
- findObject(String) - Method in interface nxopen.cae.modelcheck.ElementQualitySettingCollection
-
- findObject(String) - Method in interface nxopen.cae.ModelingObjectPropertyTableCollection
-
- findObject(String) - Method in interface nxopen.cae.ModelUpdateDesignVariablesCollection
-
Finds a design variable event with a specified label.
- findObject(String) - Method in interface nxopen.cae.ModelUpdateSolutionCollection
-
Finds a model update meta solution with specified solution name
License requirements: None.
- findObject(String) - Method in interface nxopen.cae.optimization.DAOConstraintCollection
-
Finds an optimization solution design constraint with a specified name
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- findObject(String) - Method in interface nxopen.cae.optimization.DAODesignVariableCollection
-
Finds an optimization solution design variable with a specified name
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- findObject(String) - Method in interface nxopen.cae.optimization.DAOSolutionCollection
-
Finds an optimization solution with a specified name
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- findObject(String) - Method in interface nxopen.cae.optimization.TBSConstraintCollection
-
Finds a response constraint with the specified name within an optimization solution
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
- findObject(String) - Method in interface nxopen.cae.optimization.TBSDesignVariableCollection
-
Finds a design variable object with specified name in an optimization solution
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
- findObject(String) - Method in interface nxopen.cae.optimization.TBSOptimizationSolutionCollection
-
Finds an optimization solution with specified name
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
- findObject(String) - Method in interface nxopen.cae.optimization.TBSRestrictAreaCollection
-
Finds a restrict area with the specified name within an optimization solution
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
- findObject(String) - Method in interface nxopen.cae.optimization.TBSSmoothCollection
-
Finds a smooth object with specified name within an optimization solution
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
- findObject(String) - Method in interface nxopen.cae.PhysicalPropertyTableCollection
-
- findObject(String) - Method in interface nxopen.cae.PreTestExciterConfigCollection
-
Finds a exciter selection configuration with specified name
License requirements: None.
- findObject(String) - Method in interface nxopen.cae.PreTestExciterSelectionDofSetCollection
-
Finds a exciter selection configuration with specified name
License requirements: None.
- findObject(String) - Method in interface nxopen.cae.PreTestSensorConfigCollection
-
Finds a sensor selection configuration with specified name
License requirements: None.
- findObject(String) - Method in interface nxopen.cae.PreTestSensorSelectionDofSetCollection
-
Finds a sensor selection configuration with specified name
License requirements: None.
- findObject(String) - Method in interface nxopen.cae.PreTestSolutionCollection
-
Finds a pre-test setup with specified name
License requirements: None.
- findObject(String) - Method in interface nxopen.cae.qualityaudit.Manager
-
Finds the
INXObject
with the given identifier as recorded in a journal.
- findObject(String) - Method in interface nxopen.cae.responsesimulation.ExcitationCollection
-
Finds an excitation with specified excitation name
License requirements: nx_response_anlys ("NX Response Analysis")
.
- findObject(String) - Method in interface nxopen.cae.responsesimulation.RSEventCollection
-
Finds an event with specified event name
License requirements: nx_response_anlys ("NX Response Analysis")
.
- findObject(String) - Method in interface nxopen.cae.responsesimulation.SensorCollection
-
Finds an sensor with specified event name
License requirements: nx_response_anlys ("NX Response Analysis")
.
- findObject(String) - Method in interface nxopen.cae.responsesimulation.SolutionCollection
-
Finds a response analysis meta solution with specified solution name
License requirements: nx_response_anlys ("NX Response Analysis")
.
- findObject(String) - Method in interface nxopen.cae.responsesimulation.StrainGageCollection
-
Finds an strain gage with specified gage name
License requirements: nx_response_anlys ("NX Response Analysis")
.
- findObject(String) - Method in interface nxopen.cae.ResultManager
-
Returns a
Result
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
Created in NX7.5.1
- findObject(String) - Method in interface nxopen.cae.SelectionRecipeCollection
-
Finds the
SelectionRecipe
with the given identifier as recorded in a journal.
- findObject(String) - Method in interface nxopen.cae.SimConstraintCollection
-
Finds the
SimConstraint
with the given identifier as recorded in a journal.
- findObject(String) - Method in interface nxopen.cae.SimConstraintSetCollection
-
- findObject(String) - Method in interface nxopen.cae.SimLbcFolderCollection
-
Finds the
SimLbcFolder
with the given identifier as recorded in a journal.
- findObject(String) - Method in interface nxopen.cae.SimLoadCollection
-
Finds the
SimLoad
with the given identifier as recorded in a journal.
- findObject(String) - Method in interface nxopen.cae.SimLoadSetCollection
-
Finds the
SimLoadSet
with the given identifier as recorded in a journal.
- findObject(String) - Method in interface nxopen.cae.SimRecipeCollection
-
Finds the
SimRecipe
with the given identifier as recorded in a journal.
- findObject(String) - Method in interface nxopen.cae.SimSimulationObjectCollection
-
- findObject(String) - Method in interface nxopen.cae.SketchCurvesCollection
-
Finds the
SketchCurves
with the given identifier as recorded in a journal.
- findObject(String) - Method in interface nxopen.cae.xyplot.XYPlotManager
-
Finds the
Plot
with the given identifier as recorded in a journal
License requirements: None.
- findObject(String) - Method in interface nxopen.cam.CAMAttributeCollection
-
Finds the CAM.CAMAttribute object with the given identifier as recorded in a journal.
- findObject(String) - Method in interface nxopen.cam.CAMFeatureCollection
-
Finds the CAM.CAMFeature object with the given identifier as recorded in a journal.
- findObject(String) - Method in interface nxopen.cam.InspectionGroupCollection
-
Finds the CAMInspectionGroup object with the given identifier as recorded in a journal.
- findObject(String) - Method in interface nxopen.cam.InspectionMoveCollection
-
Finds the CAM.InspectionMoveSubop object with the given identifier as recorded in a journal.
- findObject(String) - Method in interface nxopen.cam.InspectionMoveSubopCollection
-
Finds the CAM.InspectionMoveSubop object with the given identifier as recorded in a journal.
- findObject(String) - Method in interface nxopen.cam.InspectionOperationCollection
-
Finds the InspectionOperation object with the given identifier as recorded in a journal.
- findObject(String) - Method in interface nxopen.cam.InspectionTrackPointCollection
-
Finds the CAM.InspectionTrackPoint object with the given identifier.
- findObject(String) - Method in interface nxopen.cam.MoveCollection
-
Finds the CAM.Operation object with the given identifier as recorded in a journal.
- findObject(String) - Method in interface nxopen.cam.NCGroup
-
Finds the CAM.CamObject object with the given identifier as recorded in a journal.
- findObject(String) - Method in interface nxopen.cam.NCGroupCollection
-
Finds the CAM.NCGroup object with the given identifier as recorded in a journal.
- findObject(String) - Method in interface nxopen.cam.OperationCollection
-
Finds the CAM.Operation object with the given identifier as recorded in a journal.
- findObject(String) - Method in interface nxopen.cam.TrackPointCollection
-
Finds the CAM.TrackPoint object with the given identifier.
- findObject(String) - Method in interface nxopen.CollaborativeDesignCollection
-
- findObject(String) - Method in interface nxopen.CutViewCollection
-
Finds the
CutView
with the given identifier
as recorded in a journal.
- findObject(String) - Method in interface nxopen.DatumCollection
-
Finds the datum with the given identifier as recorded in a journal.
- findObject(String) - Method in interface nxopen.diagramming.AnnotationCollection
-
Finds the
Annotation
with the given identifier as recorded in a journal.
- findObject(String) - Method in interface nxopen.diagramming.ConnectionCollection
-
Finds the
Connection
with the given identifier as recorded in a journal.
- findObject(String) - Method in interface nxopen.diagramming.GroupCollection
-
Finds the
Group
with the given identifier as recorded in a journal.
- findObject(String) - Method in interface nxopen.diagramming.LeaderLineCollection
-
Finds the
LeaderLine
with the given identifier as recorded in a journal.
- findObject(String) - Method in interface nxopen.diagramming.NodeCollection
-
Finds the
Node
with the given identifier as recorded in a journal.
- findObject(String) - Method in interface nxopen.diagramming.PortCollection
-
Finds the
Port
with the given identifier as recorded in a journal.
- findObject(String) - Method in interface nxopen.diagramming.ShapeCollection
-
Finds the
Shape
with the given identifier as recorded in a journal.
- findObject(String) - Method in interface nxopen.diagramming.SheetBordersAndZonesCollection
-
- findObject(String) - Method in interface nxopen.diagramming.SheetCollection
-
Finds the
Sheet
with the given identifier as recorded in a journal.
- findObject(String) - Method in interface nxopen.diagramming.tables.TableCollection
-
Finds the
Table
with the given identifier as recorded in a journal.
- findObject(String) - Method in interface nxopen.diagramming.TitleBlockCollection
-
Finds the
TitleBlock
with the given identifier as recorded in a journal.
- findObject(String) - Method in interface nxopen.display.CameraCollection
-
Finds the
Camera
with the given identifier as recorded in a journal.
- findObject(String) - Method in interface nxopen.display.DynamicSectionCollection
-
Finds the
DynamicSection
with the given identifier as
recorded in a journal.
- findObject(String) - Method in interface nxopen.display.GridCollection
-
Finds the
Grid
with the given identifier
as recorded in a journal.
- findObject(String) - Method in interface nxopen.display.ImageCollection
-
Finds the
ImageBase
with the given identifier
as recorded in a journal.
- findObject(String) - Method in interface nxopen.display.ImageDataCollection
-
Finds the
ImageData
with the given identifier
as recorded in a journal.
- findObject(String) - Method in interface nxopen.display.PointCloudCollection
-
Finds the
PointCloud
with the given
identifier as recorded in a journal.
- findObject(String) - Method in interface nxopen.display.TrueShadingCollection
-
Finds the
TrueShading
with the given identifier
as recorded in a journal.
- findObject(String) - Method in interface nxopen.display.TrueStudioCollection
-
Finds the
TrueStudio
with the given identifier
as recorded in a journal.
- findObject(String) - Method in interface nxopen.drawings.BordersAndZonesCollection
-
- findObject(String) - Method in interface nxopen.drawings.DraftingBodyCollection
-
Finds the
DraftingBody
with the given identifier as recorded in a journal.
- findObject(String) - Method in interface nxopen.drawings.DraftingCurveCollection
-
Finds the
DraftingCurve
with the given identifier as recorded in a journal.
- findObject(String) - Method in interface nxopen.drawings.DraftingDrawingSheetCollection
-
- findObject(String) - Method in interface nxopen.drawings.DraftingPointCollection
-
Finds the
DraftingPoint
with the given identifier as recorded in a journal.
- findObject(String) - Method in interface nxopen.drawings.DraftingViewCollection
-
Finds the
DraftingView
with the given identifier as recorded in a journal.
- findObject(String) - Method in interface nxopen.drawings.DrawingRegionCollection
-
- findObject(String) - Method in interface nxopen.drawings.DrawingSheetCollection
-
- findObject(String) - Method in interface nxopen.drawings.SheetDraftingViewCollection
-
Finds the
DraftingView
with the given identifier as recorded in a journal.
- findObject(String) - Method in interface nxopen.drawings.ViewAlignmentCollection
-
Finds the
ViewAlignment
with the given identifier as recorded in a journal.
- findObject(String) - Method in interface nxopen.drawings.ViewBreakCollection
-
Finds the
DraftingView
with the given identifier as recorded in a journal.
- findObject(String) - Method in interface nxopen.ExpressionCollection
-
Finds the
Expression
with the given identifier as recorded in a journal.
- findObject(String) - Method in interface nxopen.ExpressionGroupCollection
-
Finds the
ExpressionGroup
with the given identifier as recorded in a journal.
- findObject(String) - Method in interface nxopen.facet.FacetedBodyCollection
-
Finds the
FacetedBody
with the given identifier as recorded in a journal.
- findObject(String) - Method in interface nxopen.features.FeatureCollection
-
Finds the nxopen.Features
with the given identifier as recorded in a journal.
- findObject(String) - Method in interface nxopen.features.shipdesign.PenetrationRequestCollection
-
- findObject(String) - Method in interface nxopen.InfiniteLineCollection
-
Finds the
InfiniteLine
with the given identifier as recorded in a journal.
- findObject(String) - Method in interface nxopen.INXObject
-
Finds the
NXObject
with the given identifier as recorded in a journal.
- findObject(String) - Method in interface nxopen.issue.IssueListCollection
-
- findObject(String) - Method in interface nxopen.layer.CategoryCollection
-
- findObject(String) - Method in interface nxopen.layout2d.ComponentCollection
-
Finds the
Component
with the given identifier as recorded in a journal.
- findObject(String) - Method in interface nxopen.layout2d.ComponentDefinitionCollection
-
- findObject(String) - Method in interface nxopen.layout2d.LayoutDrawingSheetCollection
-
- findObject(String) - Method in interface nxopen.layout2d.LocalDefinitionFolderCollection
-
- findObject(String) - Method in interface nxopen.LayoutCollection
-
Finds the
Layout
with the given identifier as recorded in a journal.
- findObject(String) - Method in interface nxopen.LightCollection
-
Finds the
Light
with the given identifier
as recorded in a journal.
- findObject(String) - Method in interface nxopen.LineCollection
-
Finds the
Line
with the given identifier as recorded in a journal.
- findObject(String) - Method in interface nxopen.markup.MarkupFileCollection
-
Finds the
File
with the given id.
- findObject(String) - Method in interface nxopen.markup.MarkupFileObjectCollection
-
- findObject(String) - Method in interface nxopen.markup.MarkupObjectCollection
-
- findObject(String) - Method in interface nxopen.mechatronics.AccelerometerCollection
-
- findObject(String) - Method in interface nxopen.mechatronics.AdapterFormulaCollection
-
- findObject(String) - Method in interface nxopen.mechatronics.AdapterSignalCollection
-
- findObject(String) - Method in interface nxopen.mechatronics.AlignBodyCollection
-
- findObject(String) - Method in interface nxopen.mechatronics.AngularLimitJointCollection
-
- findObject(String) - Method in interface nxopen.mechatronics.AngularSpringJointCollection
-
- findObject(String) - Method in interface nxopen.mechatronics.BallJointCollection
-
- findObject(String) - Method in interface nxopen.mechatronics.BreakingConstraintCollection
-
- findObject(String) - Method in interface nxopen.mechatronics.CamCollection
-
Finds the
Cam
with the given name.
- findObject(String) - Method in interface nxopen.mechatronics.CamProfileCollection
-
- findObject(String) - Method in interface nxopen.mechatronics.ChangeMaterialCollection
-
- findObject(String) - Method in interface nxopen.mechatronics.CollisionBodyCollection
-
- findObject(String) - Method in interface nxopen.mechatronics.CollisionMaterialCollection
-
- findObject(String) - Method in interface nxopen.mechatronics.CollisionSensorCollection
-
- findObject(String) - Method in interface nxopen.mechatronics.CurveOnCurveJointCollection
-
- findObject(String) - Method in interface nxopen.mechatronics.CylindricalJointCollection
-
- findObject(String) - Method in interface nxopen.mechatronics.DisplayChangerCollection
-
- findObject(String) - Method in interface nxopen.mechatronics.DistanceSensorCollection
-
- findObject(String) - Method in interface nxopen.mechatronics.DynamicObjectTableCollection
-
- findObject(String) - Method in interface nxopen.mechatronics.ElectricalPartCollection
-
- findObject(String) - Method in interface nxopen.mechatronics.ExpressionBlockCollection
-
- findObject(String) - Method in interface nxopen.mechatronics.ExpressionBlockFormulaCollection
-
- findObject(String) - Method in interface nxopen.mechatronics.ExternalConnectionCollection
-
- findObject(String) - Method in interface nxopen.mechatronics.ExternalSignalConfigurationCollection
-
- findObject(String) - Method in interface nxopen.mechatronics.FixedJointCollection
-
- findObject(String) - Method in interface nxopen.mechatronics.ForceTorqueControlCollection
-
- findObject(String) - Method in interface nxopen.mechatronics.FunctionObjectCollection
-
- findObject(String) - Method in interface nxopen.mechatronics.GanttCollection
-
- findObject(String) - Method in interface nxopen.mechatronics.GanttLinkerCollection
-
- findObject(String) - Method in interface nxopen.mechatronics.GearCollection
-
Finds the
Gear
with the given name.
- findObject(String) - Method in interface nxopen.mechatronics.GenericSensorCollection
-
- findObject(String) - Method in interface nxopen.mechatronics.GraphControlCollection
-
- findObject(String) - Method in interface nxopen.mechatronics.HingeJointCollection
-
- findObject(String) - Method in interface nxopen.mechatronics.HydraulicCylinderCollection
-
- findObject(String) - Method in interface nxopen.mechatronics.HydraulicValveCollection
-
- findObject(String) - Method in interface nxopen.mechatronics.InclinometerCollection
-
- findObject(String) - Method in interface nxopen.mechatronics.LimitSwitchCollection
-
- findObject(String) - Method in interface nxopen.mechatronics.LinearLimitJointCollection
-
- findObject(String) - Method in interface nxopen.mechatronics.LinearSpringJointCollection
-
- findObject(String) - Method in interface nxopen.mechatronics.LogicObjectCollection
-
- findObject(String) - Method in interface nxopen.mechatronics.MATLABSignalConnectionCollection
-
- findObject(String) - Method in interface nxopen.mechatronics.MCDSignalServerConfigurationCollection
-
- findObject(String) - Method in interface nxopen.mechatronics.MotionProfileCollection
-
- findObject(String) - Method in interface nxopen.mechatronics.ObjectSinkCollection
-
- findObject(String) - Method in interface nxopen.mechatronics.ObjectSourceCollection
-
- findObject(String) - Method in interface nxopen.mechatronics.ObjectTransformerCollection
-
- findObject(String) - Method in interface nxopen.mechatronics.PathConstraintJointCollection
-
- findObject(String) - Method in interface nxopen.mechatronics.PhysicsPreferenceCollection
-
- findObject(String) - Method in interface nxopen.mechatronics.PlanarJointCollection
-
- findObject(String) - Method in interface nxopen.mechatronics.PMNavFolderLocatorCollection
-
- findObject(String) - Method in interface nxopen.mechatronics.PMNavFolderObjectCollection
-
- findObject(String) - Method in interface nxopen.mechatronics.PneumaticCylinderCollection
-
- findObject(String) - Method in interface nxopen.mechatronics.PneumaticValveCollection
-
- findObject(String) - Method in interface nxopen.mechatronics.PointOnCurveJointCollection
-
- findObject(String) - Method in interface nxopen.mechatronics.PositionControlCollection
-
- findObject(String) - Method in interface nxopen.mechatronics.PositionSensorCollection
-
- findObject(String) - Method in interface nxopen.mechatronics.PreventCollisionCollection
-
- findObject(String) - Method in interface nxopen.mechatronics.ProxyObjectCollection
-
- findObject(String) - Method in interface nxopen.mechatronics.ProxyOverrideObjectCollection
-
- findObject(String) - Method in interface nxopen.mechatronics.RackPinionCollection
-
- findObject(String) - Method in interface nxopen.mechatronics.ReadWriteDeviceCollection
-
- findObject(String) - Method in interface nxopen.mechatronics.RelayCollection
-
Finds the
Relay
with the given name.
- findObject(String) - Method in interface nxopen.mechatronics.RequirementCollection
-
- findObject(String) - Method in interface nxopen.mechatronics.RigidBodyCollection
-
- findObject(String) - Method in interface nxopen.mechatronics.RuntimeBehaviorCollection
-
- findObject(String) - Method in interface nxopen.mechatronics.RuntimeFormulaCollection
-
- findObject(String) - Method in interface nxopen.mechatronics.RuntimeNCCollection
-
- findObject(String) - Method in interface nxopen.mechatronics.ScrewJointCollection
-
- findObject(String) - Method in interface nxopen.mechatronics.SHMSignalConnectionCollection
-
- findObject(String) - Method in interface nxopen.mechatronics.SignalAdapterCollection
-
- findObject(String) - Method in interface nxopen.mechatronics.SignalCollection
-
Finds the
Signal
with the given name.
- findObject(String) - Method in interface nxopen.mechatronics.SignalConnectionCollection
-
- findObject(String) - Method in interface nxopen.mechatronics.SignalMappingConnectionCollection
-
- findObject(String) - Method in interface nxopen.mechatronics.SlidingJointCollection
-
- findObject(String) - Method in interface nxopen.mechatronics.SpeedControlCollection
-
- findObject(String) - Method in interface nxopen.mechatronics.SpringDamperCollection
-
- findObject(String) - Method in interface nxopen.mechatronics.SymbolTableCollection
-
- findObject(String) - Method in interface nxopen.mechatronics.TagFormCollection
-
- findObject(String) - Method in interface nxopen.mechatronics.TagTableCollection
-
- findObject(String) - Method in interface nxopen.mechatronics.ThreeJointCouplerCollection
-
- findObject(String) - Method in interface nxopen.mechatronics.TracerCollection
-
Finds the
Tracer
with the given name.
- findObject(String) - Method in interface nxopen.mechatronics.TransmitterEntryCollection
-
- findObject(String) - Method in interface nxopen.mechatronics.TransmitterExitCollection
-
- findObject(String) - Method in interface nxopen.mechatronics.TransportSurfaceCollection
-
- findObject(String) - Method in interface nxopen.mechatronics.VelocitySensorCollection
-
- findObject(String) - Method in interface nxopen.mechatronics.VirtualAxisCollection
-
- findObject(String) - Method in interface nxopen.mfg.mlp.Line
-
Finds the
ProcessSetup
with the given identifier as recorded in a journal.
- findObject(String) - Method in interface nxopen.mfg.mlp.Operation
-
- findObject(String) - Method in interface nxopen.mfg.mlp.Part
-
Finds the
PartFeature
with the given identifier as recorded in a journal.
- findObject(String) - Method in interface nxopen.mfg.mlp.ProcessPlan
-
- findObject(String) - Method in interface nxopen.mfg.mlp.ProcessSetup
-
- findObject(String) - Method in interface nxopen.mfg.mlp.Product
-
Finds the
Blank
or
Part
with the given identifier as recorded in a journal.
- findObject(String) - Method in interface nxopen.mfg.mlp.ToolSet
-
Finds the
ToolAssembly
with the given identifier as recorded in a journal.
- findObject(String) - Method in interface nxopen.mfg.mlp.Workpiece
-
- findObject(String) - Method in interface nxopen.mfgmodel.MfgModelManager
-
- findObject(String) - Method in interface nxopen.ModelingViewCollection
-
Finds the
ModelingView
with the given identifier
as recorded in a journal.
- findObject(String) - Method in interface nxopen.motion.AdoptionPairCollection
-
- findObject(String) - Method in interface nxopen.motion.AnalyticalContactCollection
-
- findObject(String) - Method in interface nxopen.motion.AnalyticalContactPropertyCollection
-
- findObject(String) - Method in interface nxopen.motion.BaseSectionCollection
-
- findObject(String) - Method in interface nxopen.motion.BeamForceCollection
-
- findObject(String) - Method in interface nxopen.motion.BodyContactCollection
-
- findObject(String) - Method in interface nxopen.motion.BushingCollection
-
Finds the
Bushing
with the given name.
- findObject(String) - Method in interface nxopen.motion.ControlInputCollection
-
- findObject(String) - Method in interface nxopen.motion.ControlOutputCollection
-
- findObject(String) - Method in interface nxopen.motion.ControlPortCollection
-
- findObject(String) - Method in interface nxopen.motion.CouplerCollection
-
Finds a coupler with the given name.
- findObject(String) - Method in interface nxopen.motion.CurveContactCollection
-
- findObject(String) - Method in interface nxopen.motion.CurveOnCurveCollection
-
- findObject(String) - Method in interface nxopen.motion.DamperCollection
-
Finds the
Damper
with the given name.
- findObject(String) - Method in interface nxopen.motion.FieldDataCollection
-
- findObject(String) - Method in interface nxopen.motion.FlexBodyCollection
-
- findObject(String) - Method in interface nxopen.motion.GeneralCouplerCollection
-
- findObject(String) - Method in interface nxopen.motion.GraphManager
-
Finds the
Graph
object with the given name.
- findObject(String) - Method in interface nxopen.motion.JointCollection
-
Finds the
Joint
with the given name.
- findObject(String) - Method in interface nxopen.motion.JointDriverCollection
-
- findObject(String) - Method in interface nxopen.motion.LinkCollection
-
Finds the
Link
with the given name.
- findObject(String) - Method in interface nxopen.motion.LinkCouplerCollection
-
- findObject(String) - Method in interface nxopen.motion.LinkDriverCollection
-
- findObject(String) - Method in interface nxopen.motion.LoadTransferCollection
-
- findObject(String) - Method in interface nxopen.motion.MarkerCollection
-
Finds the
Marker
with the given name.
- findObject(String) - Method in interface nxopen.motion.MechatronicsCollection
-
- findObject(String) - Method in interface nxopen.motion.MechatronicsPortCollection
-
- findObject(String) - Method in interface nxopen.motion.MotionSensorCollection
-
- findObject(String) - Method in interface nxopen.motion.MotionSolutionCollection
-
- findObject(String) - Method in interface nxopen.motion.PackagingCollection
-
Finds the
Packaging
object with the given name.
- findObject(String) - Method in interface nxopen.motion.PlantInputCollection
-
- findObject(String) - Method in interface nxopen.motion.PlantOutputCollection
-
- findObject(String) - Method in interface nxopen.motion.PMDCMotorCollection
-
- findObject(String) - Method in interface nxopen.motion.PointOnCurveCollection
-
- findObject(String) - Method in interface nxopen.motion.PointOnSurfaceCollection
-
- findObject(String) - Method in interface nxopen.motion.PortVariableCollection
-
- findObject(String) - Method in interface nxopen.motion.RoadCollection
-
Finds the
Road
object with the given name.
- findObject(String) - Method in interface nxopen.motion.ScalarForceCollection
-
- findObject(String) - Method in interface nxopen.motion.ScalarTorqueCollection
-
- findObject(String) - Method in interface nxopen.motion.SegmentCollection
-
Finds the
Segment
object with the given name.
- findObject(String) - Method in interface nxopen.motion.SignalChartCollection
-
- findObject(String) - Method in interface nxopen.motion.SplineBeamCollection
-
- findObject(String) - Method in interface nxopen.motion.SplineBeamPropertyCollection
-
- findObject(String) - Method in interface nxopen.motion.SpringCollection
-
Finds the
Spring
with the given name.
- findObject(String) - Method in interface nxopen.motion.SubmechanismPositionerCollection
-
- findObject(String) - Method in interface nxopen.motion.TextBasedElementCollection
-
- findObject(String) - Method in interface nxopen.motion.TireCollection
-
Finds the
Tire
with the given name.
- findObject(String) - Method in interface nxopen.motion.TirePropertyBasicCollection
-
- findObject(String) - Method in interface nxopen.motion.TirePropertyCdCollection
-
- findObject(String) - Method in interface nxopen.motion.TirePropertyFtCollection
-
- findObject(String) - Method in interface nxopen.motion.TirePropertyMotorcycleCollection
-
- findObject(String) - Method in interface nxopen.motion.TirePropertyNonInertialCollection
-
- findObject(String) - Method in interface nxopen.motion.TirePropertyTnoCollection
-
- findObject(String) - Method in interface nxopen.motion.VectorForceCollection
-
- findObject(String) - Method in interface nxopen.motion.VectorTorqueCollection
-
- findObject(String) - Method in interface nxopen.NXMatrixCollection
-
Finds an NXMatrix with the given identifier as recorded in a journal
License requirements: None.
- findObject(String) - Method in interface nxopen.PartCollection
-
- findObject(String) - Method in interface nxopen.pdm.AttributeGroupCollection
-
Finds the
AttributeGroup
with the given identifier as recorded in a journal.
- findObject(String) - Method in interface nxopen.pdm.AttributeGroupDescriptionCollection
-
- findObject(String) - Method in interface nxopen.PhysicalMaterialCollection
-
- findObject(String) - Method in interface nxopen.pid.FlowDirectionArrowCollection
-
- findObject(String) - Method in interface nxopen.PointCollection
-
Finds the
Point
with the given identifier as recorded in a journal.
- findObject(String) - Method in interface nxopen.PolylineCollection
-
Finds the
Polyline
with the given identifier as recorded in a journal.
- findObject(String) - Method in interface nxopen.sim.KinematicComponentCollection
-
Finds the SIM.KinematicComponent object with the given identifier as recorded in a journal.
- findObject(String) - Method in interface nxopen.SketchCollection
-
Finds the
Sketch
with the given name.
- findObject(String) - Method in interface nxopen.SplineCollection
-
Finds the
Spline
with the given identifier as recorded in a journal.
- findObject(String) - Method in interface nxopen.tooling.BendOperationCollection
-
- findObject(String) - Method in interface nxopen.tooling.IntermediateStageCollection
-
- findObject(String) - Method in interface nxopen.UnitCollection
-
Finds the
Unit
with the given name.
- findObject(String) - Method in interface nxopen.userdefinedtemplate.Collection
-
Find the Product Interface Object with input name
License requirements: None.
- findObject(String) - Method in interface nxopen.validate.RequirementCollection
-
- findObject(String) - Method in interface nxopen.ViewCollection
-
Finds the
View
with the given identifier as recorded in a journal.
- findObject(String) - Method in interface nxopen.visualreporting.VisualReportCollection
-
Finds the
VisualReport
with the given identifier as recorded in a journal.
- findObjects(FindCriteria[]) - Method in interface nxopen.pdm.DatabaseObjectManager
-
This API finds database objects in the Teamcenter database using a Teamcenter saved query.
- findOccurrence(NXObject) - Method in interface nxopen.assemblies.Component
-
Given a prototype object, returns the corresponding occurrence
in this component
License requirements: None.
- findOccurrence(Tag, Tag) - Method in interface nxopen.uf.UFAssem
-
- findOpenings(boolean) - Method in interface nxopen.features.PatchOpeningsBuilder
-
Find all valid openings based upon input faces.
- findOrientation() - Method in interface nxopen.features.shipdesign.ProfileCutoutBuilder
-
This method will find out the profile cutout orientation.
- findOwnerOfJunction(KinematicJunction) - Method in interface nxopen.sim.KinematicConfigurator
-
Finds the
KinematicComponent
which is the owner of this junction
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
Created in NX7.5.0
- findParentComponent(KinematicComponent) - Method in interface nxopen.sim.KinematicConfigurator
-
Finds the
KinematicComponent
which is the parent of this component
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
Created in NX7.5.0
- findParser(String) - Method in interface nxopen.validate.ValidationManager
-
Finds parsers in current session.
- findPartInPath(String) - Method in interface nxopen.uf.UFRoute
-
- findPartNode(int) - Method in interface nxopen.validate.Validator
-
Finds a part node
License requirements: None.
- findPath(NXObject[], NXObject[]) - Method in interface nxopen.routing.RunCollection
-
Find a run path connecting all input From items to the To items.
- findPath(Tag, Tag) - Method in interface nxopen.uf.UFRoute
-
- FindPathData() - Constructor for class nxopen.uf.UFRoute.FindPathData
-
- findPaths(Connection.RouteLevel) - Method in interface nxopen.routing.electrical.Connection
-
Returns all the possible paths this connection can use.
- findPathsFromMultiplePoints(Point[]) - Method in interface nxopen.routing.ManualRouteBuilder
-
This function returns all possible paths which are passing through all the given points.
- FindPathsFromMultiplePointsData() - Constructor for class nxopen.routing.ManualRouteBuilder.FindPathsFromMultiplePointsData
-
- findPlacer() - Method in interface nxopen.routing.electrical.ConnectorDevice
-
Searches for a placement port for the connector device.
- FindPlacerData() - Constructor for class nxopen.routing.electrical.ConnectorDevice.FindPlacerData
-
- findPortIntegerCharacteristic(String) - Method in interface nxopen.routing.Port
-
Searches for an integer characteristics on the port, then on the ports component
and prototype port if the port is an occurrence.
- findPortRealCharacteristic(String) - Method in interface nxopen.routing.Port
-
Searches for a real characteristics on the port, then on the ports component
and prototype port if the port is an occurrence.
- findPortsInParts(Part[]) - Method in interface nxopen.weld.WeldJointBuilder
-
Gets ports from the parts.
- findPortStringCharacteristic(String) - Method in interface nxopen.routing.Port
-
Searches for a string characteristics on the port, then on the ports component
and prototype port if the port is an occurrence.
- findPositioningFeatureSet() - Method in interface nxopen.tooling.AddReusablePart
-
Find the positioning feature set by pattern sketch
License requirements: None.
- findPositioningFeatureSet() - Method in interface nxopen.tooling.FastenerAssy
-
Find the positioning feature set by pattern sketch
License requirements: None.
- findPrev16AlignsToCheck(Tag, boolean) - Method in interface nxopen.uf.UFAssem
-
- FindPrev16AlignsToCheckData() - Constructor for class nxopen.uf.UFAssem.FindPrev16AlignsToCheckData
-
- findProductAssemblies(int, Tag[]) - Method in interface nxopen.uf.UFUgmgr
-
- findProxy(String) - Method in interface nxopen.pdm.DBEntityProxyCollection
-
Find the DBEntityProxy object with input name
License requirements: None.
- findRecipeFromFluidBody(CAEBody) - Method in interface nxopen.cae.FluidDomainCollection
-
Finds the fluid domain recipe from which the fluid body was gerenared
License requirements: None.
- findReferencers(String, boolean) - Method in interface nxopen.cae.GRMSearch
-
Find CAE Objects.
- findRelationCurve(NXObject[]) - Method in interface nxopen.features.CurveFinderBuilder
-
Finds relation curves
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- findRoutedStockDevices() - Method in interface nxopen.routing.electrical.ConnectorDevice
-
Find routed stock devices.
- findRoutingControlPoint(String) - Method in interface nxopen.routing.RouteManager
-
Returns the
ControlPoint
, if any, that matches the given globally unique identifier (GUID).
- findRoutingObject(RouteManager.SearchCriteria) - Method in interface nxopen.routing.RouteManager
-
Returns the Routing object, if any, that matches the given search criteria.
- findRoutingSegments(String) - Method in interface nxopen.routing.RouteManager
-
Returns the
ISegment
s, if any, that match the given globally unique identifier (GUID).
- findScopeCurve(NXObject[]) - Method in interface nxopen.features.CurveFinderBuilder
-
Finds relation curves in the scope
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- findScopeOption() - Method in interface nxopen.features.CurveFinderBuilder
-
Returns a value that indicates which find scope option is
License requirements: None.
- findSeedCsysFromPattern(NXObject) - Method in interface nxopen.tooling.ReusePositioningObjectBuilder
-
Find the seed CSYS tag from pattern
License requirements: None.
- findSelectedReachZone(NXObject) - Method in interface nxopen.features.Human
-
Find the selected
HumanReachZone
for human feature
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
Created in NX4.0.0
- findShipComponents() - Method in interface nxopen.features.shipdesign.ShipPreparationBuilder
-
Outputs the basic design components found in the loaded assembly.
- FindShipComponentsData() - Constructor for class nxopen.features.shipdesign.ShipPreparationBuilder.FindShipComponentsData
-
- findShipDraftingViewLinesBuilderByName(String, String) - Method in interface nxopen.drawings.ViewStyleBuilder
-
Gets the
ShipDraftingViewLinesBuilder
with the given FeatureName and FeatureSubName
License requirements: nx_ship_drafting ("Ship Drafting")
Created in NX11.0.0
- findSideSegments() - Method in interface nxopen.routing.BendCorner
-
Returns the straight line segments attached to the fillet curve
of this bend corner.
- findSideSegments() - Method in interface nxopen.routing.MiteredBendCorner
-
Returns the straight line segments attached to the fillet curve
of this bend corner.
- findStockDevices() - Method in interface nxopen.routing.electrical.ConnectorDevice
-
Find stock devices.
- findTerminalPort(Tag, String) - Method in interface nxopen.uf.UFRoute
-
- findToConnector() - Method in interface nxopen.routing.electrical.Connection
-
Get the To Connector for this connection.
- findToConnector() - Method in interface nxopen.routing.electrical.ElectricalStockDevice
-
Find the to connector for this stock device.
- findTopmostCableDefinition() - Method in interface nxopen.routing.electrical.ElectricalStockDevice
-
- findUpdated() - Method in interface nxopen.blockstyler.SetList
-
When an update event occurs on the list, this method finds the
item in the list that was updated
License requirements: None.
- findValidator(String) - Method in interface nxopen.validate.ValidationManager
-
Finds validators in current session.
- findVolume() - Method in interface nxopen.cae.GroupByBoundaryBuilder
-
Finds a selection of elements representing a volume based on the chosen seed element
License requirements: None.
- FINE - Static variable in class nxopen.cae.ModelDisplayBuilder.ElmDispQuality
-
Fine
- FINE - Static variable in class nxopen.cam.Preferences.AnimationAccuracyTypes
-
Fine
- FINE - Static variable in class nxopen.cam.SimulationOptionsBuilder.Accuracy
-
use fine accuracy
- FINE - Static variable in class nxopen.cam.SimulationOptionsBuilder.Resolution
-
use fine resolution
- FINE - Static variable in class nxopen.die.CompensateRoughDataBuilder.ApproximationType
-
Perform a fine approximation.
- FINE - Static variable in class nxopen.display.FacetSettingsBuilder.AdvVisToleranceSetting
-
- FINE - Static variable in class nxopen.display.FacetSettingsBuilder.ShadedToleranceSetting
-
- FINE - Static variable in class nxopen.drawings.ViewCreationWizardBuilder.ResolutionOption
-
view display quality Fine
- FINE - Static variable in class nxopen.facet.STLImportBuilder.AngularToleranceTypes
-
- FINE - Static variable in class nxopen.fields.DisplayPropertiesBuilder.DispResolutionEnum
-
- FINE - Static variable in class nxopen.geometricanalysis.HighlightLinesAnalysisBuilder.Resolutions
-
Fine
- FINE - Static variable in class nxopen.ListCreator.ResolutionType
-
Fine
- FINE - Static variable in class nxopen.preferences.GeneralToleranceOption
-
Fine
- FINE - Static variable in class nxopen.preferences.GeneralViewQualityOption
-
Fine
- FINE - Static variable in class nxopen.preferences.PartModeling.GridResolutionType
-
Fine grid resolution
- FINE - Static variable in class nxopen.preferences.PartVisualizationShade.AdvViewToleranceType
-
Fine
- FINE - Static variable in class nxopen.preferences.PartVisualizationShade.ShadedViewToleranceType
-
For Fine: Facet Edge Tolerance is 0.0005, Facet
Chord Tolerance is 0.0025, and Angular Tolerance is 6
- FINE - Static variable in class nxopen.preferences.SessionModeling.PreviewResolutionType
-
- FINE - Static variable in class nxopen.preferences.SessionVisualizationHighQualityImage.PlotQualityType
-
- FINE - Static variable in class nxopen.preferences.ShadingToleranceOption
-
Fine
- FINE - Static variable in class nxopen.STLImporter.AngularToleranceType
-
Import with fine angular tolerance.
- FINE - Static variable in class nxopen.tooling.DieEngDefineProductOrientationBuilder.FacetQualityOption
-
- FINE - Static variable in class nxopen.VRMLImporter.AngularToleranceType
-
Import with fine angular tolerance.
- FineBrushFacetsRule - Interface in nxopen
-
- FineBrushFacetsRule.Data - Class in nxopen
-
- fineBrushToolDirection - Variable in class nxopen.FineBrushFacetsRule.Data
-
the vector defining direction of fine brush tool
- fineBrushToolRadius - Variable in class nxopen.FineBrushFacetsRule.Data
-
the radius of fine brush tool
- fineBrushToolStartPoint - Variable in class nxopen.FineBrushFacetsRule.Data
-
the start point of fine brush tool
- fineFinishCorner1() - Method in interface nxopen.cam.BoundaryTurnMemberSet
-
Returns the fine finish corner 1
License requirements: None.
- fineFinishCorner2() - Method in interface nxopen.cam.BoundaryTurnMemberSet
-
Returns the fine finish corner 2
License requirements: None.
- fineFinishOffset() - Method in interface nxopen.cam.BoundaryTurnMemberSet
-
Returns the fine finish offset
License requirements: None.
- finePrecision() - Method in interface nxopen.sim.KinematicAxisBuilder
-
Returns the fine precision.
- FingerClearanceNotch - Interface in nxopen.die
-
Represents a die design finger clearance notch feature.
- FingerClearanceNotchBuilder - Interface in nxopen.die
-
- FingerClearanceNotchBuilder.Types - Class in nxopen.die
-
Specifies what type of base geometry to build the finger clearance notch from.
- finish() - Method in interface nxopen.annotations.DraftingSurfaceFinishBuilder
-
Returns the finish
License requirements: None.
- finish() - Method in interface nxopen.annotations.SurfaceFinishBuilder
-
Returns the finish
License requirements: None.
- finish(View) - Method in interface nxopen.display.NonProportionalZoom
-
Signals the completion of a non-proportional zoom defined by one or more pairs
of points defined by a mouse gesture.
- finish() - Method in interface nxopen.motion.AnimationControl
-
Finish animation
License requirements: mechanisms ("MECHANISMS")
.
- finish() - Method in interface nxopen.motion.ArticulationControl
-
Articulation finish
License requirements: mechanisms ("MECHANISMS")
.
- finish() - Method in interface nxopen.motion.LoadTransferControl
-
Closes the load transfer control
License requirements: mechanisms ("MECHANISMS")
.
- finish() - Method in interface nxopen.motion.PostToolsControl
-
Finish post tools control
License requirements: mechanisms ("MECHANISMS")
.
- finish() - Method in interface nxopen.motion.SpreadsheetRunControl
-
SpreadsheetRun finish
License requirements: mechanisms ("MECHANISMS")
.
- FINISH_ALL - Static variable in class nxopen.cam.ProfileStrategy.Types
-
Profile strategy: Finish All
- finishAtSafePlane() - Method in interface nxopen.cam.InspectionCollisionAvoidanceBuilder
-
Returns a flag to indicate whether to finish at safe plane after last path
License requirements: None.
- FinishDwell - Interface in nxopen.cam
-
- finishDwell() - Method in interface nxopen.cam.TurnCutParameters
-
Returns the finish dwell
License requirements: None.
- FinishDwell.Types - Class in nxopen.cam
-
The dwell after finish/profile cut mode options .
- FinishMethod - Class in nxopen.annotations
-
Specifies the weld finish method
- finishMethod() - Method in interface nxopen.annotations.LineWeldSideData
-
Returns the weld finish method
License requirements: None.
- finishMethod() - Method in interface nxopen.weld.JointExitBuilder
-
Returns the weld finish method
License requirements: None.
- finishOperation() - Method in interface nxopen.die.FlangeTaskBuilder
-
Returns the finish operation of the flange task
License requirements: die_engineering ("DIE ENGINEERING")
.
- finishOperation() - Method in interface nxopen.die.FormTaskBuilder
-
Returns the finish operation switch of the form task, if true the form task is a finish operation, if false it is not.
- finishOperation() - Method in interface nxopen.die.PierceTaskBuilder
-
Returns the finish operation of the pierce task
True indicates the pierce is to be a finish pierce.
- finishOperation() - Method in interface nxopen.die.TrimTaskBuilder
-
Returns the finish operation of the trim task
True indicates the trim is to be a finish trim.
- finishOperation() - Method in interface nxopen.tooling.DieEngFormTaskBuilder
-
Returns the finish operation option.
- finishOperation() - Method in interface nxopen.tooling.DieEngTrimTaskBuilder
-
Returns the finish operation.
- finishPasses() - Method in interface nxopen.cam.MillCutParameters
-
Returns the finish passes
License requirements: None.
- finishPasses() - Method in interface nxopen.cam.ThreadCutParameters
-
Returns the finish passes
License requirements: None.
- finishPasses() - Method in interface nxopen.cam.TurnCutParameters
-
Returns the finish passes
License requirements: None.
- finishPasses() - Method in interface nxopen.cam.WedmBasedGeomBuilder
-
Returns the Finish Passes
License requirements: cam_base ("CAM BASE")
.
- FinishPassesBuilder - Interface in nxopen.cam
-
Represents a FinishPasses Builder
This is an abstract class, and cannot be instantiated.
- finishPassesBuilder() - Method in interface nxopen.cam.WedmGeomBuilder
-
Returns the finish_passes builder
License requirements: cam_base ("CAM BASE")
.
- finishPassesBuilder() - Method in interface nxopen.cam.WedmOperationBuilder
-
Returns the finish_passes builder
License requirements: cam_base ("CAM BASE")
.
- finishStepoverBuilder() - Method in interface nxopen.cam.FinishPassesBuilder
-
Returns the parameter to define the stepover value for a finish pass
License requirements: cam_base ("CAM BASE")
.
- finishStock() - Method in interface nxopen.cam.TeachmodeProfileMoveBuilder
-
Returns the finish stock builder
License requirements: None.
- finishSymbol() - Method in interface nxopen.annotations.LineWeldDataBuilder
-
Returns the finishing method for the weld symbol
License requirements: None.
- FinishTurning - Interface in nxopen.cam
-
Represents a Turn Finishing operation
To create or edit an instance of this class, use
FinishTurningBuilder
Created in NX7.5.0
- FinishTurningBuilder - Interface in nxopen.cam
-
- finishType - Variable in class nxopen.uf.UFDrf.WeldSymInfo
-
- FINITE - Static variable in class nxopen.display.Background.BackgroundDomeType
-
finite 3D dome
- FINITE - Static variable in class nxopen.features.sheetmetal.BridgeTransitionBuilder.WidthOptions
-
Bridge Transition starts at specified point on start edge and extends on one side by the specified distance.
- FINITE - Static variable in class nxopen.features.sheetmetal.ContourFlangeBuilder.SweepTypeOptions
-
- FINITE - Static variable in class nxopen.features.sheetmetal.NormalCutoutBuilder.DepthTypeOptions
-
Finite
- FINITE - Static variable in class nxopen.motion.LmsSolverProperty.StaticJacobianTypes
-
- FINITE_ELEMENT - Static variable in class nxopen.cae.ResultMeasure.SubsetSelection
-
Evaluate for subset selection of finite element entities
- FIRE_HOSE - Static variable in class nxopen.cam.fbm.ThreadFeatureGeometry.Form
-
Form: Fire Hose
- FIRE_HOSE - Static variable in class nxopen.cam.HoleBossGeom.FormTypes
-
Form: Fire Hose
- FIREHOSE - Static variable in class nxopen.cam.DrillThreadMillToolBuilder.ToolFormTypeTypes
-
Fire Hose
- FIRM - Static variable in class nxopen.HumanPosturePredictionBuilder.CushionFirmnessType
-
Indicate firm cushion
- FIRST - Static variable in class nxopen.annotations.ArrowDisplay
-
Displays arrow to the first object selected to create
the dimension
- FIRST - Static variable in class nxopen.annotations.ExtensionLineDisplay
-
Displays extension line attached to the
first object selected to create the dimension
- FIRST - Static variable in class nxopen.blockstyler.Tree.NodeInsertOption
-
Node is placed first in the hierarchy in which it is inserted.
- FIRST - Static variable in class nxopen.cae.NodalForceReportBuilder.LoadcaseSelection
-
- FIRST - Static variable in class nxopen.cae.ResultProbeBuilder.IterationSelection
-
- FIRST - Static variable in class nxopen.cae.ResultProbeBuilder.LoadcaseSelection
-
- FIRST - Static variable in class nxopen.cae.SimSolution.StepPosition
-
first
- FIRST - Static variable in class nxopen.cam.InspectionPathBuilder.FirstLastType
-
First Point
- FIRST - Static variable in class nxopen.drawings.DrawingSheetBuilder.SheetProjectionAngle
-
first angle projection
- FIRST - Static variable in class nxopen.facet.SewFacetBodyBuilder.VertexIndex
-
Index of the first vertex
- FIRST - Static variable in class nxopen.features.subdivision.SubdivisionPrimitiveShapeBuilderEx.SphereSubdivisionLevel
-
- FIRST - Static variable in class nxopen.features.vehicledesign.PedestrianProtectionBuilder.Wad
-
First wrap around distance line
- FIRST - Static variable in class nxopen.layout2d.ConvertLayoutToSheetBuilder.SheetProjectionAngleType
-
first angle projection
- FIRST - Static variable in class nxopen.MeshProfileString.SelectedPoint
-
- FIRST - Static variable in class nxopen.tooling.AutoDimensionBuilder.TextFontType
-
- FIRST - Static variable in class nxopen.tooling.BurringInsertBuilder.BurringPunchTypes
-
use first type
- FIRST - Static variable in class nxopen.tooling.HoleDatumSymbolBuilder.SymbolType
-
- FIRST - Static variable in class nxopen.weld.JointExitBuilder.BodySide
-
the first side.
- FIRST - Static variable in class nxopen.weld.WeldFacesetIndex
-
first face set
- FIRST - Static variable in class nxopen.weld.WeldGroupIdColor
-
First Group Id Color Index
- FIRST_AND_SECOND_POINT - Static variable in class nxopen.features.DatumPlaneBuilder.UseArcLength
-
Only first and second point use arclength
- FIRST_AND_THIRD_POINT - Static variable in class nxopen.features.DatumPlaneBuilder.UseArcLength
-
Only first and third point use arclength
- FIRST_ANGLE - Static variable in class nxopen.drawings.DrawingSheet.ProjectionAngleType
-
- FIRST_ANGLE_PROJECTION - Static variable in class nxopen.tooling.CompDrawingBuilder.ProjectionType
-
first angle projection
- FIRST_ANGLE_PROJECTION - Static variable in class nxopen.uf.UFDraw.ProjectionAngle
-
- FIRST_AXIS - Static variable in class nxopen.cae.PostGraphAlongPathBuilder.CoordinateSysAxis
-
- FIRST_CUT - Static variable in class nxopen.cam.CamOperationMotionType
-
- FIRST_CUT - Static variable in class nxopen.cam.CamPathMotionType
-
- FIRST_CUT - Static variable in class nxopen.cam.MoveBuilder.Motion
-
First Cut
- FIRST_LAST - Static variable in class nxopen.cae.optimization.TBSOutputControlOptions.Op2Option
-
Output op2 results of first and last iteration
- FIRST_LAYER - Static variable in class nxopen.layer.Constants
-
The number of the first layer.
- FIRST_LEVEL - Static variable in class nxopen.preferences.SessionModeling.ImmediateChildrenType
-
Indicates that Immediate Children type is at first level
- FIRST_LEVEL_MEMBERS - Static variable in class nxopen.features.ColorFeatureGroupBuilder.ProcessType
-
set color and apply to first level members
- FIRST_LINK - Static variable in class nxopen.uf.UFMotion.ReferenceFrame
-
- FIRST_PAIR_ONLY - Static variable in class nxopen.geometricanalysis.SimpleInterference.FaceInterferenceMethod
-
Find first pair of interfering faces
- FIRST_POINT - Static variable in class nxopen.features.DatumAxisBuilder.UseArcLength
-
Only first point uses arclength
- FIRST_POINT - Static variable in class nxopen.features.DatumPlaneBuilder.UseArcLength
-
Only first point uses arclength
- FIRST_RUN - Static variable in class nxopen.routing.IntegrateRunsBuilder.Enum
-
- FIRST_SET - Static variable in class nxopen.motion.PackagingInterferenceBuilder.Frame
-
Interference solids positioned relative to
interfering links in first set.
- FIRST_STRETCH_WALL - Static variable in class nxopen.die.AddendumSectionBuilder.SegmentType
-
Update first stretch wall segment.
- FIRST_VALUE - Static variable in class nxopen.cae.ReassignElementsBuilder.ElementTypeOption
-
- FIRST_VALUE - Static variable in class nxopen.features.shipdesign.SteelDistributionBuilder.SaForm
-
- FIRST_VALUE - Static variable in class nxopen.features.shipdesign.SteelDistributionBuilder.SaMaterial
-
- FIRST_VALUE - Static variable in class nxopen.features.shipdesign.SteelDistributionBuilder.SaName
-
- FIRST_VALUE - Static variable in class nxopen.features.shipdesign.SteelDistributionBuilder.SaSize
-
- FIRST_VALUE - Static variable in class nxopen.features.shipdesign.SteelDistributionBuilder.SaType
-
- FIRST_VIEW_FOUND - Static variable in class nxopen.display.TransientText.ViewType
-
- FIRST_XTHEN_Y - Static variable in class nxopen.features.ProjectCurveBuilder.ArcLengthType
-
Represents First X then Y
- FIRST_YTHEN_X - Static variable in class nxopen.features.ProjectCurveBuilder.ArcLengthType
-
Represents First Y then X
- firstAdoptionCurve() - Method in interface nxopen.features.shipdesign.StandardPartItemBuilder
-
Returns the first adoption curve.
- firstArrowheadCfw - Variable in class nxopen.uf.UFDrf.LineArrowPreferences
-
- firstArrowheadColor() - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
Returns the first arrowhead color
License requirements: None.
- firstArrowheadFont() - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
Returns the first arrowhead font
License requirements: None.
- firstArrowheadWidth() - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
Returns the first arrowhead width
License requirements: None.
- firstArrowLineCfw - Variable in class nxopen.uf.UFDrf.LineArrowPreferences
-
- firstArrowLineColor() - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
Returns the first arrow line color
License requirements: None.
- firstArrowLineFont() - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
Returns the first arrow line font
License requirements: None.
- firstArrowLineWidth() - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
Returns the first arrow line width
License requirements: None.
- firstArrowType() - Method in interface nxopen.annotations.LineAndArrowPreferences
-
Returns the first arrow type
License requirements: None.
- firstArrowType() - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
Returns the first arrowhead type
License requirements: None.
- firstArrowType - Variable in class nxopen.uf.UFDrf.LineArrowPreferences
-
- firstAssociativity() - Method in interface nxopen.annotations.BaseAngularDimensionBuilder
-
Returns the first associativity
License requirements: None.
- firstAssociativity() - Method in interface nxopen.annotations.BaseChamferDimensionBuilder
-
Returns the first associativity
License requirements: None.
- firstAssociativity() - Method in interface nxopen.annotations.BaseCurveLengthDimensionBuilder
-
Returns the first associativity
License requirements: None.
- firstAssociativity() - Method in interface nxopen.annotations.BaseLinearDimensionBuilder
-
Returns the first associativity.
- firstAssociativity() - Method in interface nxopen.annotations.BaseRadialDimensionBuilder
-
Returns the first associativity.
- firstAssociativity() - Method in interface nxopen.annotations.BaseRapidDimensionBuilder
-
Returns the first associativity
License requirements: None.
- firstAssociativity() - Method in interface nxopen.annotations.BaseThicknessDimensionBuilder
-
Returns the first associativity
License requirements: None.
- firstAssociativity() - Method in interface nxopen.annotations.ShipDimensionBuilder
-
Returns the first associativity
License requirements: None.
- firstBendRadius() - Method in interface nxopen.features.sheetmetal.HemFlangeBuilder
-
Returns the first bend radius
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- firstBody() - Method in interface nxopen.geometricanalysis.SimpleInterference
-
Returns the First Body
License requirements: None.
- firstBody() - Method in interface nxopen.mechatronics.ChangeMaterialBuilder
-
Returns the first body of collision pair.
- firstBody() - Method in interface nxopen.mechatronics.PreventCollisionBuilder
-
Returns the first object.
- firstBoundingObject() - Method in interface nxopen.features.TrimCurveBuilder
-
Returns the objects for the first boundary against which the selected curves are to be trimmed.
- firstBoundingObjectEndOption() - Method in interface nxopen.features.TrimCurveBuilder
-
Returns the end of the first bounding object which would be trimmed
License requirements: None.
- firstBoundingObjectOption() - Method in interface nxopen.features.TrimCurveBuilder
-
Returns the first bounding object option
License requirements: None.
- firstBoundingObjectPickPoint() - Method in interface nxopen.features.TrimCurveBuilder
-
Returns the pick point for the first bounding object
License requirements: None.
- firstBoundingPlane() - Method in interface nxopen.features.TrimCurveBuilder
-
Returns the first bounding object plane
License requirements: None.
- firstBranchID() - Method in interface nxopen.routing.BranchPathNumberingBuilder
-
Returns the formula specified in the UI to compute the first branch ID for the labeling sequence
in order to be valid, the formula must be blank OR contain the phrase "PARENT_BRANCH_ID"
License requirements: routing_hvac ("Routing HVAC")
.
- firstChainInstallDirection() - Method in interface nxopen.features.shipdesign.StandardPartItemBuilder
-
Returns
the flag to indicate whether to flip the direction of the first selected chain object or not.
- firstChainObject() - Method in interface nxopen.features.shipdesign.StandardPartItemBuilder
-
Returns the first chain selected object.
- firstChannel() - Method in interface nxopen.tooling.CoolingConnectBuilder
-
Returns the first channel to be connected.
- firstChildNode() - Method in interface nxopen.blockstyler.Node
-
Returns the first child node.
- firstClearance() - Method in interface nxopen.tooling.SpecialFormingBuilder
-
Returns the first clearance
License requirements: None.
- firstCompartment() - Method in interface nxopen.features.shipdesign.StandardPartFrameworkBuilder
-
Returns the first compartment option.
- firstConstraintCurveCollector() - Method in interface nxopen.geometricutilities.ConicCrossSection
-
Returns the first constraint curve collector
License requirements: None.
- firstContactCurve() - Method in interface nxopen.motion.CurveContactBuilder
-
Returns the selection of the first contact curve
License requirements: None.
- firstContactGeometry() - Method in interface nxopen.motion.BodyContactBuilder
-
Returns the selection of the first contact geometry
License requirements: None.
- firstConveyingSurfaceCroner() - Method in interface nxopen.linedesigner.SingleElementConveyorBuilder
-
Returns the first conveying surface corner of conveyor
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- firstCorner() - Method in interface nxopen.drawings.StandardViewsBuilder
-
- firstCornerEdges - Variable in class nxopen.uf.UFModl.SmreliefData
-
- firstCornerFilletRadius - Variable in class nxopen.uf.UFModl.SmreliefData
-
- firstCouple() - Method in interface nxopen.motion.LinkCouplerBuilder
-
Returns the first couple
License requirements: None.
- firstCrossContinuity() - Method in interface nxopen.features.ThroughCurveMeshBuilder
-
- firstCsys() - Method in interface nxopen.motion.JointDefine
-
Returns the CSYS of first link
License requirements: mechanisms ("MECHANISMS")
.
- firstCurve() - Method in interface nxopen.cam.TeachmodeLinearMoveBuilder
-
Returns the First Curve
License requirements: None.
- firstCurve() - Method in interface nxopen.features.CircularBlendCurveBuilder
-
Returns the first curve chain
License requirements: None.
- firstCurve() - Method in interface nxopen.features.GeodesicChamferBuilder
-
Returns the first selected curve in the section
License requirements: None.
- firstCurve() - Method in interface nxopen.features.GeodesicFilletBuilder
-
Returns the first selected curve in the section
License requirements: None.
- firstCurve() - Method in interface nxopen.geometricanalysis.DeviationChecking
-
- firstCurveMaximumPenetrationExpression() - Method in interface nxopen.motion.CurveContactRecurdyn
-
Returns the first curve maximum penetration expression
License requirements: None.
- firstCurveStock() - Method in interface nxopen.cam.TeachmodeLinearMoveBuilder
-
Returns the Stock on first Curve
License requirements: None.
- firstCurveTag - Variable in class nxopen.uf.UFCurve.AskCombineCurvesData
-
- firstCurveToolPosition() - Method in interface nxopen.cam.TeachmodeLinearMoveBuilder
-
Returns the Tool Position to first Curve
License requirements: None.
- firstCustomizedMaterial() - Method in interface nxopen.motion.AnalyticalContactPropertyBuilder
-
Returns the first customized material
License requirements: mechanisms ("MECHANISMS")
.
- firstCut() - Method in interface nxopen.cam.DmStreamlineCutStep
-
Returns the first cut which defines point number for the first cut
License requirements: None.
- firstCut() - Method in interface nxopen.cam.PathDisplayColors
-
Returns the color first cut
License requirements: None.
- firstCutMode() - Method in interface nxopen.cam.Cycle
-
Returns the first cut mode type
License requirements: None.
- firstCuttingEdge() - Method in interface nxopen.cam.TurnCutterClearance
-
Returns the first cutting edge clearance angle
License requirements: None.
- firstCutValue() - Method in interface nxopen.cam.Cycle
-
Returns the the first cut value
License requirements: None.
- firstDefinitionPoint() - Method in interface nxopen.annotations.Associativity
-
Returns the first definition point.
- firstDir - Variable in class nxopen.uf.UFCurve.AskCombineCurvesData
-
- firstDistance() - Method in interface nxopen.cam.StepoverBuilder
-
Returns the First Distance
License requirements: None.
- firstDistance() - Method in interface nxopen.facet.ExtrudeProfileBuilder
-
Returns the first distance to extrude
License requirements: None.
- firstDistance() - Method in interface nxopen.features.sheetmetal.FlangeBuilder
-
- firstDriverJointLowerLimit() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
Returns the lower limit value for the first joint of the suspension template.
- firstDriverJointSteps() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
Returns the step number for the first joint of the suspension template.
- firstDriverJointUpperLimit() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
Returns the upper limit value for the first joint of the suspension template.
- firstEdge() - Method in interface nxopen.geometricanalysis.DeviationChecking
-
- firstEdge() - Method in interface nxopen.geometricanalysis.SurfaceContinuityAnalysisBuilder
-
Returns the first edges or faces
License requirements: None.
- firstEdgeContinuity() - Method in interface nxopen.features.BridgeSurfaceBuilder
-
Returns the first edge continuity
License requirements: None.
- firstEdgeOffset() - Method in interface nxopen.features.BridgeSurfaceBuilder
-
Returns the first edge offset
License requirements: None.
- firstEdgeRange() - Method in interface nxopen.features.BridgeSurfaceBuilder
-
Returns the first edge range
License requirements: None.
- firstEdgeSelection() - Method in interface nxopen.features.BridgeSurfaceBuilder
-
Returns the first edge selection
License requirements: None.
- firstElement() - Method in interface nxopen.cae.SwapDiagonalBuilder
-
Returns the first element
License requirements: None.
- firstElementSplitType() - Method in interface nxopen.cae.ElementSplitBuilder
-
Returns the flip_type for first element in the selection list
License requirements: nx_masterfem ("Finite Element Modeling")
.
- firstEndPoint() - Method in interface nxopen.formboard.PathLengthAnnotationBuilder
-
Returns the first end point
License requirements: routing_harness ("Routing Harness")
.
- firstExtensionLineCfw - Variable in class nxopen.uf.UFDrf.LineArrowPreferences
-
- firstExtensionLineColor() - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
Returns the first extension line color
License requirements: None.
- firstExtensionLineFont() - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
Returns the first extension line font
License requirements: None.
- firstExtensionLineWidth() - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
Returns the first extension line width
License requirements: None.
- firstFace() - Method in interface nxopen.features.IntersectionCurveBuilder
-
Returns the first face
License requirements: None.
- firstFace - Variable in class nxopen.features.sheetmetal.ClosedCornerBuilder.FacePairData
-
First face of the face pair
- firstface - Variable in class nxopen.features.sheetmetal.EditCornerBuilder.FacePairData
-
First face of the face pair
- firstFace - Variable in class nxopen.features.sheetmetal.ThreeBendCornerBuilder.FacePairData
-
First face of the face pair
- firstFace() - Method in interface nxopen.geometricanalysis.DeviationChecking
-
- firstFaceCollector() - Method in interface nxopen.features.FaceBlendBuilder
-
Returns the first face collector
License requirements: None.
- firstFaceSet() - Method in interface nxopen.geometricanalysis.SurfaceIntersectionBuilder
-
Returns the first selected face set
License requirements: None.
- firstFaceset() - Method in interface nxopen.weld.GrooveBuilder
-
- firstFacesetBottomEdges() - Method in interface nxopen.weld.GrooveBuilder
-
- firstFacesetHelpPoint() - Method in interface nxopen.weld.GrooveBuilder
-
- firstFacesetTopEdges() - Method in interface nxopen.weld.GrooveBuilder
-
- firstFlangeLength() - Method in interface nxopen.features.sheetmetal.HemFlangeBuilder
-
Returns the first flange length
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- firstGeometry() - Method in interface nxopen.SketchDimensionBuilder
-
Returns the first geometry
License requirements: None.
- firstGeometryBoundingBufferLengthExpression() - Method in interface nxopen.motion.BodyContactRecurdyn
-
Returns the bounding Buffer Length expression
License requirements: None.
- firstGeometryMaterialDirection() - Method in interface nxopen.motion.CurveContactBuilder
-
Returns the first geometry materia side direction
License requirements: None.
- firstGeometryMaxFacetSizeFactorExpression() - Method in interface nxopen.motion.BodyContactRecurdyn
-
Returns the max Facet Size Factor expression
License requirements: None.
- firstGeometryMaxFacetSizeFactorFlag() - Method in interface nxopen.motion.BodyContactRecurdyn
-
Returns the max Facet Size Factor Flag
License requirements: None.
- firstGeometryMaximumPenetrationExpression() - Method in interface nxopen.motion.BodyContactRecurdyn
-
Returns the Plane Maximum Penetration of the first geometry expresion
License requirements: None.
- firstGeometryPlaneToleranceFactorExpression() - Method in interface nxopen.motion.BodyContactRecurdyn
-
Returns the Plane Tolerance Factor of the first geometry expresion
License requirements: None.
- firstGeometryPlaneToleranceFactorSolidContactExpression() - Method in interface nxopen.motion.BodyContactRecurdyn
-
Returns the Plane Tolerance Factor of the first geometry for solid contact expression
License requirements: None.
- firstGuide() - Method in interface nxopen.features.StyledSweepBuilder
-
Returns the first guide
License requirements: None.
- firstGuideContinuity() - Method in interface nxopen.features.StudioSurfaceBuilder
-
Returns the first guide continuity
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- firstGuideContinuity() - Method in interface nxopen.features.StudioSurfaceBuilderEx
-
Returns the first guide continuity
License requirements: None.
- firstIntersectionPoints() - Method in interface nxopen.features.shipdesign.ProfileSystemBuilder
-
Returns the selected intersection points between the curves and the first boundary.
- firstJogAngle() - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
Returns the first jog angle, between the jog and the extension line, in degrees.
- firstJogDisplay() - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
Returns the first jog's display flag, if true, the first jog will be displayed, false otherwise
License requirements: None.
- firstJogEndOffset() - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
Returns the first jog end offset from the dimension line
License requirements: None.
- firstJogOrientation() - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
Returns the first jog orientation, can be either IN or OUT
License requirements: None.
- firstJogStartOffset() - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
Returns the first jog start offset from the dimension line
License requirements: None.
- firstJoint() - Method in interface nxopen.motion.CouplerBuilder
-
Returns the first joint
License requirements: None.
- firstJoint() - Method in interface nxopen.motion.GeneralCouplerBuilder
-
Returns the selected first joint
License requirements: None.
- firstLameFromBulkPoisson(double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the 1st Lame constant from bulk modulus and poisson ratio.
- firstLameFromBulkShear(double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the 1st Lame constant from bulk modulus and shear modulus.
- firstLameFromShearPoisson(double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the 1st Lame constant from shear modulus and poisson ratio.
- firstLameFromYoungsBulk(double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the 1st Lame constant from youngs modulus and bulk modulus.
- firstLameFromYoungsPoisson(double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the 1st Lame constant from youngs modulus and poisson.
- firstLameFromYoungsShear(double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the 1st Lame constant from youngs modulus and shear modulus.
- firstLawControl() - Method in interface nxopen.geometricutilities.ConicCrossSection
-
Returns the First Offset Law builder
License requirements: None.
- firstLayerThickness() - Method in interface nxopen.cae.MeshControlBuilder
-
Returns the layer thickness
License requirements: nx_masterfem ("Finite Element Modeling")
.
- firstLeg() - Method in interface nxopen.weld.FilletBuilder
-
Returns the linear dimension first leg.
- firstLength() - Method in interface nxopen.tooling.DieBaseBuilder
-
Returns the first section length.
- firstLimitPoint() - Method in interface nxopen.die.OutputCurvesBuilder
-
Returns the first limit point.
- firstLine - Variable in class nxopen.uf.UFModl.DimensionData
-
- firstLinearDistance() - Method in interface nxopen.cam.ToolPathEditorBuilder
-
Returns the first linear distance
License requirements: None.
- firstLink() - Method in interface nxopen.motion.JointDefine
-
Returns the first link object
License requirements: mechanisms ("MECHANISMS")
.
- firstLocation() - Method in interface nxopen.geometricutilities.StyledSweepDoubleOnPathDimBuilder
-
Returns the first location
License requirements: None.
- firstMapView() - Method in interface nxopen.drawings.AssociativeAngleBuilder
-
Returns the first map view
License requirements: None.
- firstMargin() - Method in interface nxopen.tooling.AutoDimensionBuilder
-
Returns the first margin tag
License requirements: None.
- firstMarginOffset() - Method in interface nxopen.annotations.OrdinateDimensionPreferences
-
Returns the first margin offset
License requirements: None.
- firstMatrix() - Method in interface nxopen.motion.JointDefine
-
Returns the matrix of first link
License requirements: mechanisms ("MECHANISMS")
.
- firstObject() - Method in interface nxopen.annotations.Associativity
-
Returns the first associativity object
License requirements: None.
- firstObject() - Method in interface nxopen.drawings.AssociativeAngleBuilder
-
Returns the first object
License requirements: None.
- firstObject() - Method in interface nxopen.features.shipdesign.StandardPartItemBuilder
-
Returns the first selected object.
- firstObjectFilter() - Method in interface nxopen.cam.CollisionPairBuilder
-
Returns the first collision selection filter
License requirements: None.
- firstObjectName() - Method in interface nxopen.cam.CollisionPairBuilder
-
Returns the first collision selection name
License requirements: None.
- firstObjectType() - Method in interface nxopen.drawings.AssociativeAngleBuilder
-
Returns the first object type
License requirements: None.
- firstOffset() - Method in interface nxopen.features.ChamferBuilder
-
Returns the first offset distance (expression).
- firstOffset() - Method in interface nxopen.features.SweepAlongGuideBuilder
-
Returns the first offset
License requirements: None.
- firstOffset() - Method in interface nxopen.features.ThickenBuilder
-
Returns the first offset.
- firstOffset() - Method in interface nxopen.geometricutilities.ConicCrossSection
-
Returns the first offset for the conic section with face blend
License requirements: None.
- firstOffset - Variable in class nxopen.uf.UFModl.AskThickenSheetParmsData
-
- firstOffsetExp() - Method in interface nxopen.features.ChamferBuilder
-
Returns the first offset expression object of chamfer.
- firstOffsetOption() - Method in interface nxopen.geometricutilities.ConicCrossSection
-
Returns the first offset option for the conic section with face blend
License requirements: None.
- firstOrientationType() - Method in interface nxopen.motion.JointDefine
-
Returns the first orientation type of joint
License requirements: mechanisms ("MECHANISMS")
.
- firstOrigin() - Method in interface nxopen.motion.JointDefine
-
Returns the origin of first link
License requirements: mechanisms ("MECHANISMS")
.
- firstPlane() - Method in interface nxopen.features.IntersectionCurveBuilder
-
Returns the first plane
License requirements: None.
- firstPlane() - Method in interface nxopen.features.shipdesign.StandardPartItemBuilder
-
Returns the first selected plane.
- firstPlane() - Method in interface nxopen.routing.FittingOverstockBuilder
-
Returns the first trimming plane
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- FirstPlunge - Interface in nxopen.cam
-
Represents the first plunge .
- firstPlunge() - Method in interface nxopen.cam.RoughTurningBuilder
-
Returns the First Plunge
License requirements: None.
- FirstPlunge.Positions - Class in nxopen.cam
-
the first plunge positions .
- firstPlungeOnly() - Method in interface nxopen.cam.ChipControl
-
Returns the First Plunge Only
License requirements: None.
- firstpoint - Variable in class nxopen.cae.BoxBoundingVolume.DiagonalPointsData
-
- firstPoint(Point3d, View) - Method in interface nxopen.display.NonProportionalZoom
-
Scales the specified view non-proportionally in the horizontal (X) and vertical (Y)
dimensions, based on a mouse gesture defined by two points in a view.
- firstPoint() - Method in interface nxopen.features.GeodesicChamferBuilder
-
Returns the first selection point
License requirements: None.
- firstPoint() - Method in interface nxopen.features.GeodesicFilletBuilder
-
Returns the first selection point
License requirements: None.
- firstPoint - Variable in class nxopen.uf.UFModl.DimensionData
-
- firstPosToExtensionLineDistance() - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
Returns the distance from the position on the object being dimensioned to
the end of the first extension line or arc
License requirements: None.
- firstPosToExtensionLineDistance - Variable in class nxopen.uf.UFDrf.LineArrowPreferences
-
- firstPosToExtLineDist() - Method in interface nxopen.annotations.LineAndArrowPreferences
-
Returns the first position to extension line distance
License requirements: None.
- firstPrimaryContinuity() - Method in interface nxopen.features.ThroughCurveMeshBuilder
-
Returns the first primary continuity,
Continuity
.
- firstPtSelect() - Method in interface nxopen.cae.FaceFromBoundaryBuilder
-
Returns the first pt to join the ends of open edges in the loop.
- firstRadius() - Method in interface nxopen.cam.TurnEngageRetractBuilder
-
Returns the First Radius
License requirements: None.
- firstRadiusExpression() - Method in interface nxopen.motion.CouplerBuilder
-
Returns the first radius expression.
- firstReferenceIntersection() - Method in interface nxopen.features.TrimCurveBuilder
-
Returns the first user defined intersection point.
- firstRegionLimitCurve() - Method in interface nxopen.features.GlobalShapingBuilder
-
Returns the first region limit curve
License requirements: None.
- firstRegionLimitCurveOffsetLaw() - Method in interface nxopen.features.GlobalShapingBuilder
-
Returns the region to deform offset law
License requirements: None.
- firstRegionOffsetCurve() - Method in interface nxopen.features.GlobalShapingBuilder
-
Returns the first region offset curve
License requirements: None.
- firstRun() - Method in interface nxopen.routing.IntegrateRunsBuilder
-
Returns the first run
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- firstScaleExpression() - Method in interface nxopen.motion.GeneralCouplerBuilder
-
Returns the first scale expression
License requirements: None.
- firstSection() - Method in interface nxopen.features.GeodesicChamferBuilder
-
Returns the first section of curves to chamfer
License requirements: None.
- firstSection() - Method in interface nxopen.features.GeodesicFilletBuilder
-
Returns the first section of curves to fillet
License requirements: None.
- firstSection() - Method in interface nxopen.features.RuledBuilder
-
Returns the first section
License requirements: features_modeling ("FEATURES MODELING") OR nx_freeform_1 ("basic freeform modeling")
.
- firstSectionContinuity() - Method in interface nxopen.features.StudioSurfaceBuilder
-
Returns the first section continuity
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- firstSectionContinuity() - Method in interface nxopen.features.StudioSurfaceBuilderEx
-
Returns the first section continuity
License requirements: None.
- firstSectionContinuity() - Method in interface nxopen.features.ThroughCurvesBuilder
-
Returns the first section continuity.
- firstSegment() - Method in interface nxopen.routing.DiscontinuityCorner
-
Returns the first segment of a discontinuity corner, segment must be
attached to the
ControlPoint
that
defines this corner.
- firstSelectedNode() - Method in interface nxopen.blockstyler.Tree
-
Returns the first selected node among the available selected nodes.
- firstSelectElement() - Method in interface nxopen.cae.CfdContactPreventionConstraintBuilder
-
Returns the first element selection
License requirements: None.
- firstSelection() - Method in interface nxopen.cae.CfdContactPreventionConstraintBuilder
-
Returns the first selection
License requirements: None.
- firstSet() - Method in interface nxopen.features.IntersectionCurveBuilder
-
Returns the first set required only for non-associative intersection curve
License requirements: None.
- firstSolution() - Method in interface nxopen.routing.PlacementSolutionsBuilder
-
Cycle to the first solution.
- firstSuperElementIncrement() - Method in interface nxopen.motion.AnalyticalContactBuilder
-
Returns the first super element increment
License requirements: mechanisms ("MECHANISMS")
.
- firstSuperElementLink() - Method in interface nxopen.motion.AnalyticalContactBuilder
-
Returns the first super element link
License requirements: mechanisms ("MECHANISMS")
.
- firstTargetCurve() - Method in interface nxopen.features.GlobalShapingBuilder
-
Returns the first target curve
License requirements: None.
- firstTargetCurveOffset() - Method in interface nxopen.features.GlobalShapingBuilder
-
Returns the first target curve offset
License requirements: None.
- firstType() - Method in interface nxopen.motion.GeneralCouplerBuilder
-
Returns the first joint movement type
License requirements: None.
- firstVector() - Method in interface nxopen.annotations.BaseAngularDimensionBuilder
-
Returns the first vector
License requirements: None.
- firstVector() - Method in interface nxopen.drawings.AssociativeAngleBuilder
-
Returns the first vector
License requirements: None.
- firstVector() - Method in interface nxopen.motion.JointDefine
-
Returns the direction of first link
License requirements: mechanisms ("MECHANISMS")
.
- firstVectorForBunnyEar() - Method in interface nxopen.tooling.CornerDesignBuilder
-
Returns the first vector for bunny ear
License requirements: None.
- firstVectorView() - Method in interface nxopen.annotations.BaseAngularDimensionBuilder
-
Returns the first vector view
License requirements: None.
- FIT - Static variable in class nxopen.annotations.FitAnsiHoleType
-
Use fit values for the ANSI limit and fit tolerance
- FIT - Static variable in class nxopen.annotations.HoleCalloutSettingsBuilder.Parametertype
-
- FIT - Static variable in class nxopen.features.sheetmetal.GussetBuilder.PlacementTypes
-
Users will specify the number of occurances of Gusset on the selected bend face and software will calculate the spacing.
- FIT - Static variable in class nxopen.positioning.Constraint.Type
-
Two geometries are coincident
- FIT - Static variable in class nxopen.uf.UFDisp.Context
-
- FIT - Static variable in class nxopen.userdefinedobjects.UserDefinedEvent.Reason
-
Fit display event
- fit() - Method in interface nxopen.View
-
Adjusts the bounds of a given view so that it fully encompasses
the extents of the model geometry.
- FIT - Static variable in class nxopen.View.ScaleAdjustment
-
- FIT_APPROXIMATE - Static variable in class nxopen.MeshParameterData.Type
-
- FIT_CIRCLE - Static variable in class nxopen.features.FitCurveBuilder.Types
-
Fits an arc or a circle
- FIT_ELLIPSE - Static variable in class nxopen.features.FitCurveBuilder.Types
-
Fits an ellipse
- FIT_EXACT - Static variable in class nxopen.MeshParameterData.Type
-
- FIT_LINE - Static variable in class nxopen.features.FitCurveBuilder.Types
-
Fits a line
- FIT_METHOD_ABBREVIATE - Static variable in class nxopen.uf.UFTabnot.FitMethod
-
- FIT_METHOD_AUTO_SIZE_COL - Static variable in class nxopen.uf.UFTabnot.FitMethod
-
- FIT_METHOD_AUTO_SIZE_ROW - Static variable in class nxopen.uf.UFTabnot.FitMethod
-
- FIT_METHOD_AUTO_SIZE_TEXT - Static variable in class nxopen.uf.UFTabnot.FitMethod
-
- FIT_METHOD_NONE - Static variable in class nxopen.uf.UFTabnot.FitMethod
-
- FIT_METHOD_OVERWRITE_BORDER - Static variable in class nxopen.uf.UFTabnot.FitMethod
-
- FIT_METHOD_REMOVE_SPACES - Static variable in class nxopen.uf.UFTabnot.FitMethod
-
- FIT_METHOD_TRUNCATE - Static variable in class nxopen.uf.UFTabnot.FitMethod
-
- FIT_METHOD_WRAP - Static variable in class nxopen.uf.UFTabnot.FitMethod
-
- FIT_SPLINE - Static variable in class nxopen.features.FitCurveBuilder.Types
-
Fits a spline
- FIT_SYMBOLS - Static variable in class nxopen.annotations.FitDisplayStyle
-
Display only the grade and deviation
- FIT_SYMBOLS_AND_LIMITS - Static variable in class nxopen.annotations.FitDisplayStyle
-
Display grade, deviation, and limit values
- FIT_SYMBOLS_AND_TOLERANCES - Static variable in class nxopen.annotations.FitDisplayStyle
-
Display grade, deviation, and tolerance values
- FIT_TO_FACET - Static variable in class nxopen.features.FillHoleBuilder.ShapeControlTypes
-
- FIT_TO_POINTS - Static variable in class nxopen.features.FillHoleBuilder.ShapeControlTypes
-
- FIT_TO_TARGET - Static variable in class nxopen.features.RefitFaceBuilder.Types
-
refit face to target
- FIT_UP - Static variable in class nxopen.features.shipdesign.ExcessMaterialBuilder.Types
-
fit up placement method (added in NX902)
- fitAfterShowOrHide(View.ShowOrHideType) - Method in interface nxopen.View
-
Adjusts the bounds of a given view conditionally so that it fully encompasses
the extents of the model geometry.
- fitAll() - Method in interface nxopen.ViewCollection
-
Adjusts the center and scale of each view in the current layout such that all of each
view is visible, except that this fit operation is not applied to member views on a drawing.
- FitAnsiHoleType - Class in nxopen.annotations
-
Specifies the limit and fit ANSI hole
- FitAssemblyDisplayStyle - Class in nxopen.annotations
-
- FitAssemblyNewDisplayStyle - Class in nxopen.annotations
-
Specifies the limit and fit assembly new display style
- fitAxisLimit() - Method in interface nxopen.cae.xyplot.Plot
-
Update axis limits for an overlaying plot if current displayed axis limits in plot do not fit for all records.
- FITCONE - Static variable in class nxopen.features.FitSurfaceBuilder.Types
-
Fit Cone
- fitConstraints() - Method in interface nxopen.facet.BestFitAlignBuilder
-
Returns the fit constraint
License requirements: None.
- FitCurve - Interface in nxopen.features
-
Represents a fit curve feature
To create or edit an instance of this class, use
FitCurveBuilder
Created in NX8.5.0
- FitCurveBuilder - Interface in nxopen.features
-
- FitCurveBuilder.FittingParametersOptions - Class in nxopen.features
-
Fitting parameters options
- FitCurveBuilder.ProjectionDirectionOptions - Class in nxopen.features
-
Auxiliary curve projection direction options
- FitCurveBuilder.TargetSourceTypes - Class in nxopen.features
-
Fitting target types
- FitCurveBuilder.Types - Class in nxopen.features
-
Fitting types
- FITCYLINDER - Static variable in class nxopen.features.FitSurfaceBuilder.Types
-
Fit Cylinder
- fitDirection() - Method in interface nxopen.features.RefitFaceBuilder
-
Returns the refit face fit direction
License requirements: None.
- fitDirectionData - Variable in class nxopen.uf.UFModl.RefitFaceTargetData
-
- FitDisplayAlignment - Class in nxopen.annotations
-
Specifies the limit and fit display alignment
- FitDisplaySplitByDimline - Class in nxopen.annotations
-
Specifies the limit and fit assembly display when split by dimension line
- FitDisplayStyle - Class in nxopen.annotations
-
Specifies the limit and fit display style
- fitDistance() - Method in interface nxopen.tooling.EjectorPostProcessingBuilder
-
Returns the distance used to adjust the length of an ejector pin for the false body
License requirements: None.
- FitError() - Constructor for class nxopen.uf.UFCurve.FitError
-
- FitError(double, double, int, int) - Constructor for class nxopen.uf.UFCurve.FitError
-
- FITFREEFORM - Static variable in class nxopen.features.FitSurfaceBuilder.Types
-
Fit Freeform
- fitGrade - Variable in class nxopen.uf.UFGdt.LimitsAndFitsData
-
- fitMethod() - Method in interface nxopen.geometricutilities.CurveFitData
-
Returns the fitting method
License requirements: None.
- fitMethod() - Method in interface nxopen.MeshParameterData
-
Returns
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- fitMethods - Variable in class nxopen.uf.UFTabnot.CellPrefs
-
- fitOption() - Method in interface nxopen.geometricutilities.CurveFitOptions
-
Returns the curve fit method
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- fitOption() - Method in interface nxopen.geometricutilities.EndHoleData
-
Returns the fit option
License requirements: None.
- fitOption() - Method in interface nxopen.geometricutilities.MiddleHoleData
-
Returns the fit option
License requirements: None.
- fitOption() - Method in interface nxopen.geometricutilities.StartHoleData
-
Returns the fit option
License requirements: None.
- fitPercentage() - Method in interface nxopen.preferences.SessionVisualizationScreen
-
Returns the fit percentage.
- FITPLANE - Static variable in class nxopen.features.FitSurfaceBuilder.Types
-
Fit Plane
- FITSPHERE - Static variable in class nxopen.features.FitSurfaceBuilder.Types
-
Fit Sphere
- FitSurface - Interface in nxopen.features
-
Represents a fit surface feature
To create or edit an instance of this class, use
FitSurfaceBuilder
Created in NX8.5.0
- FitSurfaceBuilder - Interface in nxopen.features
-
This class will provide the ability to fit surfaces through facet bodies or point sets/groups.
- FitSurfaceBuilder.DirectionType - Class in nxopen.features
-
Direction method provides the ability to specify the projection direction and orientation
- FitSurfaceBuilder.TargetType - Class in nxopen.features
-
Target type provides the ability to specify a object or a color coded region as the target
- FitSurfaceBuilder.Types - Class in nxopen.features
-
Fit Surface creation types
- FITTED - Static variable in class nxopen.motion.BodyContactRecurdyn.SurfaceType
-
- FITTED_TO_BOUNDARY - Static variable in class nxopen.features.IFormBuilder.BSurfaceExtractionOptions
-
Extract surface fitted to boundary of face
- FITTING_OVERSTOCK - Static variable in class nxopen.formboard.UpdateDiscrepancy.ObjectType
-
Overstock applied to fittings.
- FITTING_OVERSTOCK - Static variable in class nxopen.routing.StockBrowserBuilder.TypeFilter
-
- FITTING_PORT - Static variable in class nxopen.routing.Port.PortType
-
Fitting Port
- fittingMembers() - Method in interface nxopen.routing.WatertightFittingsBuilder
-
Returns the Routing Object Collector builder that stores selected routing members
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- FittingOverstock - Interface in nxopen.routing
-
The
FittingOverstock
object represents overstock
applied over the faces of the routing parts.
- fittingOverstock() - Method in interface nxopen.routing.RouteManager
-
Routing FittingOverstock collection .
- FittingOverstockBuilder - Interface in nxopen.routing
-
- FittingOverstockBuilder.TrimMethod - Class in nxopen.routing
-
Trimming option.
- FittingOverstockBuilder.Types - Class in nxopen.routing
-
Overstock application method.
- FittingOverstockCollection - Interface in nxopen.routing
-
- fittingParameters() - Method in interface nxopen.features.FitCurveBuilder
-
Returns the fitting parameters
License requirements: None.
- fittingPoint() - Method in interface nxopen.tooling.ChannelFittingBuilder
-
Returns the new point specified for the cooling fitting point.
- FittingPort - Interface in nxopen.routing
-
- FittingPortCollection - Interface in nxopen.routing
-
- fittingPorts() - Method in interface nxopen.routing.RouteManager
-
FittingPort Collection .
- FITTO_BOUNDARY - Static variable in class nxopen.features.StudioXformBuilderEx.ExtrationMethodType
-
Extract surface fitted to boundary of face
- fitToleranceParentheses() - Method in interface nxopen.annotations.DimensionStyleBuilder
-
Returns the fit tolerance parentheses option.
- fitToleranceSeparator() - Method in interface nxopen.annotations.DimensionStyleBuilder
-
Returns the fit tolerance separator option.
- fitToObjects(IFitTo[]) - Method in interface nxopen.View
-
Adjusts the bounds of a given view so that it fully encompasses
the extents of the given objects.
- fitToSectionClipPlanes() - Method in interface nxopen.preferences.SessionVisualizationScreen
-
Returns the option to specify whether, when sectioning is enabled for a view, the bounds computed
by a Fit operation should be limited by the sectioning clipping planes.
- fitType - Variable in class nxopen.uf.UFGdt.LimitsAndFitsData
-
- fitView() - Method in interface nxopen.cae.xyplot.Plot
-
Fits the display view on a reasonable region.
- fitView(Tag, double) - Method in interface nxopen.uf.UFView
-
- FIVE - Static variable in class nxopen.annotations.AutomaticCenterlineBuilder.CenterlineThickness
-
Width Five
- FIVE - Static variable in class nxopen.annotations.CenterlineSettingsBuilder.CenterlineThickness
-
Width Five
- FIVE - Static variable in class nxopen.annotations.IntersectionSymbolBuilder.Thickness
-
Width Five
- FIVE - Static variable in class nxopen.annotations.LineWidth
-
Width Five
- FIVE - Static variable in class nxopen.annotations.OffsetCenterPointBuilder.Thickness
-
Width Five
- FIVE - Static variable in class nxopen.annotations.TargetPointBuilder.Thickness
-
Width Five
- FIVE - Static variable in class nxopen.cae.CfdAutoRefinementConstraintBuilder.LocalSubdivisions
-
Five levels of subdivision
- FIVE - Static variable in class nxopen.cae.CfdContactPreventionConstraintBuilder.LocalSubdivisions
-
- FIVE - Static variable in class nxopen.cae.CfdLocalResolutionConstraintBuilder.LocalSubdivisions
-
- FIVE - Static variable in class nxopen.cae.FluidDomainBuilder.SubdivisionType
-
- FIVE - Static variable in class nxopen.cae.ModelDisplayBuilder.FreeEdgeWidth
-
- FIVE - Static variable in class nxopen.cae.ModelDisplayBuilder.RotationAxisWidth
-
- FIVE - Static variable in class nxopen.cae.ModelDisplayBuilder.StitchedEdgeWidth
-
- FIVE - Static variable in class nxopen.cam.CamPathToolAxisType
-
- FIVE - Static variable in class nxopen.die.SpringbackCompensationBuilder.DegreeType
-
Degree is 5
- FIVE - Static variable in class nxopen.display.GridBuilder.LineWeightType
-
- FIVE - Static variable in class nxopen.DisplayableObject.ObjectWidth
-
- FIVE - Static variable in class nxopen.drawings.CustomViewSettingsBuilder.Width
-
Five
- FIVE - Static variable in class nxopen.drawings.DrawingCompareSettingsBuilder.WidthType
-
Deprecated.
Width Five
- FIVE - Static variable in class nxopen.features.shipdesign.SectionDrawingBuilder.ViewsPerSheetOptions
-
- FIVE - Static variable in class nxopen.features.vehicledesign.PedestrianProtectionBuilder.Width
-
- FIVE - Static variable in class nxopen.fields.DisplayPropertiesBuilder.LineWidthEnum
-
- FIVE - Static variable in class nxopen.geometricanalysis.FaceAnalysisDisplayBuilder.ColorsOptions
-
Display in 5 colors.
- FIVE - Static variable in class nxopen.PlaneTypes.AlternateType
-
Fifth alternate solution
- FIVE - Static variable in class nxopen.preferences.ViewVisualizationVisual.SmoothEdgeWidth
-
- FIVE - Static variable in class nxopen.preferences.Width
-
Width Five
- FIVE - Static variable in class nxopen.tooling.BendOperationBuilder.Prebend
-
five prebends
- FIVE - Static variable in class nxopen.tooling.BlankLayoutBuilder.SnapSizeOption
-
the snap size is 5
- FIVE - Static variable in class nxopen.tooling.DirectUnfoldBuilder.Bend
-
five bends
- FIVE - Static variable in class nxopen.tooling.PrebendBuilder.NumberBendsOption
-
five prebends
- FIVE - Static variable in class nxopen.tooling.ScrapDesignBuilder.TrimNumType
-
Specifies five steps of trimming
- FIVE - Static variable in class nxopen.ViewDependentDisplayManager.Width
-
- FIVE_LINK_SOLID_AXLEWITHOUT_STEERING - Static variable in class nxopen.features.vehicledesign.TireEnvelopeBuilder.SuspensionTemplateType
-
Use the Five Link Solid Axle without steering suspension template.
- FIVE_LINK_SUSPENSION - Static variable in class nxopen.motion.TextBasedElementBuilder.TypeChoices
-
- FIVE_POINT - Static variable in class nxopen.features.SectionSurfaceBuilder.Types
-
Deprecated.
five point
- FIVE_POINT - Static variable in class nxopen.features.SectionSurfaceBuilderEx.ConicType
-
Five Point mode
- FIVE_POINTS - Static variable in class nxopen.features.GeneralConicBuilder.Types
-
Five points, no slopes, no anchor, no rho value
- FIVE_TO_FIVE - Static variable in class nxopen.cam.ToolPathTiltAvoidance.AxisType
-
the tilting axis reference: five to five
- FIVE_TO_FIVE - Static variable in class nxopen.cam.ToolPathTiltTilting.AxisType
-
the tilting axis reference: five to five
- FIVE_TWELVE - Static variable in class nxopen.display.DecalBuilder.ImageSize
-
resize image to 512 x 512
- FIVEAXMILL - Static variable in class nxopen.sim.MachineToolConfiguration.MdynamicsTypes
-
The Five Axis Milling MDynamics type
- FIX - Static variable in class nxopen.cae.optimization.TBSCheckDOF.CheckDofOption
-
Displacement is constrainted
- FIX - Static variable in class nxopen.positioning.ComponentConstraint.DirectionToFixed
-
- FIX - Static variable in class nxopen.positioning.Constraint.Type
-
One movable object fixed
- FIX_END - Static variable in class nxopen.features.MatchEdgeBuilder.PoleMovementConstraintEnumType
-
Fix end
- FIX_GSSM_CORNER_DATA - Static variable in class nxopen.cam.CAMObject.Attr
-
- FIX_START - Static variable in class nxopen.features.MatchEdgeBuilder.PoleMovementConstraintEnumType
-
Fix start
- fixAtCurrentTimestamp() - Method in interface nxopen.features.CompositeCurveBuilder
-
Returns the fix at timestamp option
License requirements: None.
- fixAtCurrentTimestamp() - Method in interface nxopen.features.ExtractFaceBuilder
-
Returns the option specifying whether to fix the extract face operation at the current timestamp
License requirements: None.
- fixAtCurrentTimestamp() - Method in interface nxopen.features.MirrorBodyBuilder
-
Returns the fix at current timestamp
License requirements: None.
- fixAtCurrentTimestamp() - Method in interface nxopen.features.WaveLinkBuilder
-
Returns the fix at timestamp option
License requirements: None.
- fixAtCurrentTimestamp() - Method in interface nxopen.features.WavePointBuilder
-
Returns the fix at timestamp
License requirements: None.
- FIXATE - Static variable in class nxopen.HumanData.InverseKinematicsHeadEyeType
-
Indicate the position of head and eye is fixate
- fixAtTimestamp() - Method in interface nxopen.features.sheetmetal.FlatPatternBuilder
-
Returns the setting which decides whether the flattened solid will be fixed at timestamp.
- fixAtTimestamp() - Method in interface nxopen.features.sheetmetal.FlatSolidBuilder
-
Returns the setting decides whether the flattened solid will be fixed at timestamp.
- fixBsurfaceData(double, UFModl.Bsurface) - Method in interface nxopen.uf.UFModlGeneral
-
- FixBsurfaceData() - Constructor for class nxopen.uf.UFModlGeneral.FixBsurfaceData
-
- fixc - Variable in class nxopen.uf.UFModeling.AskHorzDimeData
-
- fixc - Variable in class nxopen.uf.UFModeling.AskParaDistData
-
- fixc - Variable in class nxopen.uf.UFModeling.AskVertDimeData
-
- fixconsistency - Variable in class nxopen.cae.ModelCheckManager.CheckModelConsistencyData
-
indicates whether the inconsistency is fixed
- fixConstraint() - Method in interface nxopen.assemblies.Component
-
- FIXED - Static variable in class nxopen.ame.MountingInterfaceBuilder.ReceptaclePolicy
-
- FIXED - Static variable in class nxopen.annotations.TableCellStyleBuilder.CellFormatTypes
-
Fixed
- FIXED - Static variable in class nxopen.annotations.TableCellStyleBuilder.FormatType
-
Deprecated.
- FIXED - Static variable in class nxopen.cae.connections.DofType
-
The DOF is fixed
- FIXED - Static variable in class nxopen.cae.NumberFormat.FormatOption
-
Format the number in fixed decimals
- FIXED - Static variable in class nxopen.cam.DmCmBuilder.ExtDisType
-
Specify
- FIXED - Static variable in class nxopen.cam.InspectionSensorBuilder.SensorTypes
-
Fixed
- FIXED - Static variable in class nxopen.cam.ToolAxisFixed.Types
-
Fixed
- FIXED - Static variable in class nxopen.cam.TurningOperationBuilder.ReorientToolHolderModeOptions
-
Fixed
- FIXED - Static variable in class nxopen.cam.TurningOperationBuilder.TrackingPointType
-
fixed
- FIXED - Static variable in class nxopen.cam.TurnToolProbingBuilder.TrackingPointTypes
-
fixed
- FIXED - Static variable in class nxopen.diagramming.AnnotationBuilder.TextTypeOption
-
Setting the text type fixed
- FIXED - Static variable in class nxopen.diagramming.tables.SizingMethod
-
Fixed sizing method
- FIXED - Static variable in class nxopen.display.FacetSettingsBuilder.FacetScale
-
Adjusts tolerances by a constant value
- FIXED - Static variable in class nxopen.features.DatumAxisBuilder.Types
-
Indicate the datum axis is fixed
- Fixed - Interface in nxopen.features
-
Represents a Fixed feature
To create or edit an instance of this class, use
FixedBuilder
Created in NX7.0.0
- FIXED - Static variable in class nxopen.features.sheetmetal.GussetBuilder.PlacementTypes
-
Users will specify the number of occurances and the spacing for Gussets on the selected bend face.
- FIXED - Static variable in class nxopen.features.shipdesign.ShipnameFieldBuilderType
-
Field with an unchanging string
- FIXED - Static variable in class nxopen.features.vehicledesign.SeatBeltAnchorageBuilder.SeatTypes
-
fixed
- FIXED - Static variable in class nxopen.geometricutilities.OrientationMethodBuilder.OrientationOptions
-
Fixed
- FIXED - Static variable in class nxopen.geometricutilities.OrientXpressBuilder.Reference
-
Reference CSYS is user defined coordinate system
- FIXED - Static variable in class nxopen.geometricutilities.PatternOrientation.Enum
-
same orientation as the seed.
- FIXED - Static variable in class nxopen.HumanPosturePredictionBuilder.SeatType
-
Indicate fixed seat
- FIXED - Static variable in class nxopen.mfg.am.Nester3D.Constraint
-
- FIXED - Static variable in class nxopen.motion.DriverMotionsData.DriverRotationType
-
Rotations are applied to the original position of the link
- FIXED - Static variable in class nxopen.motion.JointDefine.Type
-
This Joint fixes a link or weld two links,
It removes 6 degrees of freedom
- fixed() - Method in interface nxopen.motion.LinkBuilder
-
Returns the link fixed to the ground
License requirements: None.
- FIXED - Static variable in class nxopen.PlaneTypes.MethodType
-
Fixed Method (super type including any non-associative, xy, yz, xz, and coefficient
- FIXED - Static variable in class nxopen.positioning.Network.ObjectStatus
-
Attempt to put constraint between two fixed objects.
- FIXED - Static variable in class nxopen.Sketch.ConstraintType
-
- FIXED - Static variable in class nxopen.SketchConstraintBuilder.Constraint
-
- fixed - Variable in class nxopen.uf.UFModeling.AskHorzDimeData
-
- fixed - Variable in class nxopen.uf.UFModeling.AskParaDistData
-
- fixed - Variable in class nxopen.uf.UFModeling.AskVertDimeData
-
- FIXED - Static variable in class nxopen.uf.UFSket.ConType
-
- FIXED - Static variable in class nxopen.weld.OutputType
-
output data will not change if inputs change
- FIXED - Static variable in class nxopen.weld.WeldBeadBuilder.OutputTypes
-
Bead does not recreate itself on update.
- fixed1 - Variable in class nxopen.uf.UFModeling.AskAngleEdgeData
-
- fixed1 - Variable in class nxopen.uf.UFModeling.AskParaEdgeData
-
- fixed1 - Variable in class nxopen.uf.UFModeling.AskPerpDistData
-
- fixed2 - Variable in class nxopen.uf.UFModeling.AskAngleEdgeData
-
- fixed2 - Variable in class nxopen.uf.UFModeling.AskParaEdgeData
-
- fixed2 - Variable in class nxopen.uf.UFModeling.AskPerpDistData
-
- FIXED_AXIS - Static variable in class nxopen.cam.HoleMakingBuilder.ToolAxisTypes
-
Tool axis mode: Fixed axis
- FIXED_AXIS - Static variable in class nxopen.cam.OrientGeomBuilder.ToolAxisModes
-
Tool axis mode: Fixed axis
- FIXED_BOTTOM_AND_XY - Static variable in class nxopen.mfg.am.Nester3D.Constraint
-
- FIXED_BOTTOM_PLANE - Static variable in class nxopen.mfg.am.Nester3D.Constraint
-
- FIXED_CROSS_SECTION - Static variable in class nxopen.routing.StockType
-
Fixed cross section, e.g., conduit
- FIXED_CROSS_SECTION - Static variable in class nxopen.routing.Type
-
- FIXED_DIRECTION - Static variable in class nxopen.uf.UFModl.BeadPlaneNormal
-
- FIXED_ELEMENTS - Static variable in class nxopen.features.FlatteningAndFormingBuilderEx.Constraints
-
- FIXED_FOLDED_LENGTH - Static variable in class nxopen.features.sheetmetal.ResizeBendRadiusBuilder.Types
-
- FIXED_JOINT - Static variable in class nxopen.uf.UFMotion.JointType
-
- FIXED_JOINT_DRIVER - Static variable in class nxopen.motion.TextBasedElementBuilder.TypeChoices
-
- FIXED_LIMITS - Static variable in class nxopen.cae.xyplot.LimitsType
-
Type to use customized data limits as axis limits
- FIXED_POINT - Static variable in class nxopen.cae.Post.Format
-
- FIXED_ROTATION - Static variable in class nxopen.mfg.am.Nester3D.Constraint
-
- FIXED_SECTIONS - Static variable in class nxopen.features.vehicledesign.TireEnvelopeBuilder.EnvelopeOffsetMethod
-
Use the values in the fixed sections.
- FIXED_TO_OBSERVER - Static variable in class nxopen.display.LightBuilder.LightMode
-
- FIXED_TO_OBSERVER - Static variable in class nxopen.uf.UFView.LightMode
-
- FIXED_TO_THE_PART - Static variable in class nxopen.display.LightBuilder.LightMode
-
- FIXED_TO_THE_PART - Static variable in class nxopen.uf.UFView.LightMode
-
- FIXED_UNFOLDED_LENGTH - Static variable in class nxopen.features.sheetmetal.ResizeBendRadiusBuilder.Types
-
- FIXED_VIEW - Static variable in class nxopen.PlaneTypes.MethodType
-
View Plane method
- FIXED_X - Static variable in class nxopen.PlaneTypes.MethodType
-
Fixed plane perpendicular to X thru WCS
- FIXED_XY_CSYS - Static variable in class nxopen.PlaneTypes.MethodType
-
Fixed plane perpendicular to Z thru X-Y plane of CSYS
- FIXED_Y - Static variable in class nxopen.PlaneTypes.MethodType
-
Fixed plane perpendicular to Y thru WCS
- FIXED_Z - Static variable in class nxopen.PlaneTypes.MethodType
-
Fixed plane perpendicular to Z thru WCS
- FIXED_ZDIRECTION - Static variable in class nxopen.mfg.am.Nester3D.Constraint
-
- FixedBuilder - Interface in nxopen.features
-
Represents a builder for a fixed feature.
- fixedCameraViewing - Variable in class nxopen.uf.UFDisp.ShadeOptions
-
- fixedCsys() - Method in interface nxopen.geometricutilities.OrientXpressBuilder
-
Returns the orientXpress fixed csys when reference option is set to fixed csys
License requirements: None.
- fixedCsys() - Method in interface nxopen.weld.JointmarkBuilder
-
Returns the fixed csys that overrides the default Csys orientation.
- fixedCurves() - Method in interface nxopen.features.SmoothCurveStringBuilder
-
Returns the optional curves which are to remain fixed.
- fixedCurves() - Method in interface nxopen.geometricutilities.FtmFixedCurvesBuilder
-
Returns the fixed curves that define the fixed constraints on the product shape
License requirements: None.
- fixedCurvesContinuity() - Method in interface nxopen.geometricutilities.FtmFixedCurvesBuilder
-
Returns the continuity option for the fixed curves used in the transformation or morphing calculations
License requirements: None.
- fixedCurvesList() - Method in interface nxopen.features.FreeTransformerBuilder
-
Returns the fixed curves list that defines the list items containing fixed curves used in the transformation or morphing calculations
License requirements: None.
- fixedDirection() - Method in interface nxopen.mechatronics.BreakingConstraintBuilder
-
Returns the direction is fixed or not.
- fixedElementsList() - Method in interface nxopen.features.FlatteningAndFormingBuilderEx
-
Returns the list of points, curves or edges or faces of the source faces that act as fixed items
License requirements: None.
- FixedJoint - Interface in nxopen.mechatronics
-
Represents the Fixed Joint.
- FixedJointBuilder - Interface in nxopen.mechatronics
-
- FixedJointCollection - Interface in nxopen.mechatronics
-
Represents a collection of Fixed Joint.
- fixedJoints() - Method in interface nxopen.mechatronics.PhysicsManager
-
- FixedLimitsData() - Constructor for class nxopen.cae.xyplot.AxisStyleSetting.FixedLimitsData
-
- fixedLocationPercentage() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
Returns the fixed location percentage that is used for the fixed driver definition for two drivers.
- fixedNodes() - Method in interface nxopen.cae.MorphRevolvedMeshBuilder
-
Returns the fixed nodes
License requirements: None.
- fixedSide() - Method in interface nxopen.features.sheetmetal.BendBuilder
-
Returns the Fixed Side
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- fixedSide() - Method in interface nxopen.features.sheetmetal.JogBuilder
-
Returns
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- fixedSizeDatum() - Method in interface nxopen.features.DatumCsysBuilder
-
- fixedStringOption() - Method in interface nxopen.features.StyledSweepBuilder
-
Returns the fixed string option
License requirements: None.
- fixedTextSize() - Method in interface nxopen.preferences.SessionSketch
-
Returns the dimension text size when the text size fixed flag is set.
- fixedTextSize() - Method in interface nxopen.preferences.SketchPreferences
-
Returns the fixed text size.
- fixedVector() - Method in interface nxopen.cam.PmopToolAxisCiBuilder
-
Returns the tool axis vector
License requirements: None.
- fixedVector() - Method in interface nxopen.cam.PreprocessGeometryBuilder
-
Returns the default tool axis vector
License requirements: cam_base ("CAM BASE")
.
- FIXING - Static variable in class nxopen.ame.MountingInterfaceBuilder.InterfaceType
-
- fixingInterface() - Method in interface nxopen.ame.Snap3DModelsBuilder
-
Returns the fixingInterface of selected product
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- fixingPlacementLocation() - Method in interface nxopen.ame.SelectMountingInterfaceLocationBuilder
-
Returns the co-ordinate of fixing placement location
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- fixingType() - Method in interface nxopen.ame.MountingInterfaceBuilder
-
- fixInvalidProductInterfaceObject() - Method in interface nxopen.assemblies.productinterface.InterfaceObject
-
Fix the invalid state of product interface object
License requirements: None.
- fixLinkToGround(NXObject) - Method in interface nxopen.motion.MotionSession
-
Fixes the link to ground
License requirements: mechanisms ("MECHANISMS")
.
- fixOffplaneSketchCurves() - Method in interface nxopen.PartCleanup
-
Returns the option that specifies whether to fix off-plane sketch curves.
- fixSplineData(UFCurve.Spline, double) - Method in interface nxopen.uf.UFCurve
-
- FixSplineData() - Constructor for class nxopen.uf.UFCurve.FixSplineData
-
- fixSurfaceNodes() - Method in interface nxopen.cae.optimization.TBSMeshSmooth
-
Returns a value indicating whether to fix surface nodes outside design area
License requirements: None.
- fixTabFlangePosition() - Method in interface nxopen.tooling.BendOperationBuilder
-
Returns the switch to set if fixed tab or flange position while resize bend radius.
- fixture() - Method in interface nxopen.tooling.ElectrodeComponentBuilder
-
Returns the part which is an electrode fixture to be edited.
- FIXTURE_OFFSET - Static variable in class nxopen.cam.OrientGeomBuilder.SpecialOutputModes
-
Special output mode: Fixture offset
- FIXTURE_PORT - Static variable in class nxopen.routing.Port.PortType
-
Fixture Port
- fixtureOffsetBuilder() - Method in interface nxopen.cam.OrientGeomBuilder
-
Returns the Fixture Offset builder
License requirements: cam_base ("CAM BASE")
.
- FixturePort - Interface in nxopen.routing
-
FixturePort
objects are objects that
segments are routed through when creating a routing path.
- FixturePortCollection - Interface in nxopen.routing
-
- fixturePorts() - Method in interface nxopen.routing.RouteManager
-
FixturePort Collection .
- fixtures() - Method in interface nxopen.assemblies.MechanicalRoutingSubsetBuilder
-
Returns an option for inclusion of fixtures DE's in the Routing Work.
- FLAG - Static variable in class nxopen.annotations.LeaderData.LeaderType
-
Flag style
- FLAG - Static variable in class nxopen.cam.ProbeProtectedParametersBuilder.CollisionFlagTypes
-
Error flag
- flag - Variable in class nxopen.uf.UFCurve.State
-
- FLAGGED - Static variable in class nxopen.routing.StockType
-
Flagged, e.g., paper flag
- FLAGGED - Static variable in class nxopen.routing.Type
-
- flagOfUsingContainer() - Method in interface nxopen.mechatronics.RuntimeNCBuilder
-
Returns the flag which indicates whether to put the MCD connected objects to the specific 'Runtime NC' container or not.
- flagOfUsingSpecifiedMCF() - Method in interface nxopen.mechatronics.RuntimeNCBuilder
-
Returns the flag which indicates whether use the specified MCF or not.
- FLANGE - Static variable in class nxopen.die.SteelInsertBuilder.InsertTypeOption
-
flange
- FLANGE - Static variable in class nxopen.die.SteelInsertSegmentChildBuilder.InsertTypeOption
-
flange
- FLANGE - Static variable in class nxopen.die.SteelInsertSegmentParentBuilder.InsertTypeOption
-
flange
- Flange - Interface in nxopen.features
-
Represents a Flange feature
To create or edit an instance of this class, use
FlangeBuilder
Created in NX5.0.0
- FLANGE - Static variable in class nxopen.features.shipdesign.PenetrationRequest.CompensationType
-
- FLANGE - Static variable in class nxopen.features.shipdesign.StiffenerBySupportPathBuilder.AlignedTo
-
- FLANGE - Static variable in class nxopen.geometricanalysis.GapFlushnessBuilder.PanelTypes
-
type flange
- FLANGE - Static variable in class nxopen.tooling.InsertAuxiliaryBuilder.ShankShapeTypes
-
flange
- FLANGE_FREE - Static variable in class nxopen.features.shipdesign.EdgeReinforcementBuilder.EndCutTypes
-
- FLANGE_FREE - Static variable in class nxopen.features.shipdesign.EndCutBuilder.ConnectionTypes
-
If this Connection Type is set, the offset parameter will be ignored.
- FLANGE_FREE - Static variable in class nxopen.features.shipdesign.StiffenerSystemBuilder.EndCutTypes
-
- FLANGE_ONLY - Static variable in class nxopen.features.shipdesign.SeamBlockBuilder.SeamType
-
Split the built up flange
- FLANGE_ONLY - Static variable in class nxopen.features.SilhouetteFlangeBuilder.OutputSurfaceOptions
-
Output flange surface
- flangeAngle() - Method in interface nxopen.features.shipdesign.BuiltUpOffsetBuilder
-
Returns the flange angle used to determin the boundary of seam/split
License requirements: None.
- flangeBaseProfile() - Method in interface nxopen.die.ClampingSlotBuilder
-
Returns the closed profile of the flange base
License requirements: None.
- FlangeBendProfileData() - Constructor for class nxopen.die.RotorBuilder.FlangeBendProfileData
-
- FlangeBendPropertiesBuilder - Interface in nxopen.features.sheetmetal
-
Represents a Sheetmetal Flange Bend Properties builder class.
- FlangeBendPropertiesBuilder.Insets - Class in nxopen.features.sheetmetal
-
This enum defines the material inset types
- FlangeBendPropertiesBuilder.LengthReferences - Class in nxopen.features.sheetmetal
-
This enum defines the flange length dimension types
- FlangeBendPropertiesBuilder.WidthOptions - Class in nxopen.features.sheetmetal
-
This enum defines the flange width options
- FlangeBendPropertiesListBuilder - Interface in nxopen.features.sheetmetal
-
Represents a Sheetmetal Feature properties List builder class.
- flangeBoundary() - Method in interface nxopen.features.shipdesign.EndCutBuilder
-
Returns the flange boundary.
- FlangeBuilder - Interface in nxopen.features.sheetmetal
-
Represents a Flange feature builder.
- FlangeBuilder.InsetTypeOptions - Class in nxopen.features.sheetmetal
-
This enum represents the inset type for the material of the flange.
- FlangeBuilder.LengthTypeOptions - Class in nxopen.features.sheetmetal
-
This enum indicates the two ways that the flange length can be measured.
- FlangeBuilder.MatchFaceOptions - Class in nxopen.features.sheetmetal
-
This enum represents the match face option for the flange.
- FlangeBuilder.OffsetTypeOptions - Class in nxopen.features.sheetmetal
-
This enum represents the offset type for the flange.
- FlangeBuilder.WidthTypeOptions - Class in nxopen.features.sheetmetal
-
This enum represents the width type for the flange.
- flangeClearance() - Method in interface nxopen.features.sheetmetal.ThreeBendCornerBuilder
-
Returns the flange clearance used for three bend corner miter treatment.
- flangeCurve() - Method in interface nxopen.tooling.DieDesDrawDieBuilder
-
Returns the flange curve, which is used for extrusion.
- FlangeData() - Constructor for class nxopen.uf.UFModl.FlangeData
-
- FlangeData(int, int, int, int, int, boolean, int, String, String, String, String, String, int, int, String[], String[], String[], String[], String, String, String) - Constructor for class nxopen.uf.UFModl.FlangeData
-
- flangeData - Variable in class nxopen.uf.UFModl.InsetFlangeData
-
- flangeDirection() - Method in interface nxopen.die.DieAssistantFlangeProfile
-
Returns the flange profile flange direction
License requirements: None.
- flangeDirection() - Method in interface nxopen.routing.WatertightFittingsBuilder
-
Returns the direction of flange thickness
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- flangeEndProfile() - Method in interface nxopen.die.DieAssistantFlangeProfile
-
Returns the flange end profile
License requirements: None.
- flangeFace() - Method in interface nxopen.tooling.HemFixerBuilder
-
Returns the flange faces that will be offset for creating gap between flange and base body
License requirements: None.
- flangeFactor() - Method in interface nxopen.features.SilhouetteFlangeBuilder
-
Returns the flange pipe continuity factor.
- flangeIndex() - Method in interface nxopen.cae.qualityaudit.FreeEdgeDistanceResult
-
Returns the flange index of the close to the edge point.
- flangeIndex() - Method in interface nxopen.cae.qualityaudit.MeshLevelFailedElementCreationResult
-
Returns the flange index of the failing element creation.
- flangeIndex() - Method in interface nxopen.cae.qualityaudit.MeshLevelFailedProjectionResult
-
Returns the flange index of the failing mesh projection.
- flangeIndex() - Method in interface nxopen.cae.qualityaudit.MeshLevelFailedProjectionToleranceResult
-
Returns the flange index of the tolerance failing mesh projection.
- flangeIndex() - Method in interface nxopen.cae.qualityaudit.ObjectLevelCorrectedProjectionResult
-
Returns the flange index of the corrected projection.
- flangeIndex() - Method in interface nxopen.cae.qualityaudit.ObjectLevelFailedProjectionResult
-
Returns the flange index of the failing projection.
- flangeIndex() - Method in interface nxopen.cae.qualityaudit.ObjectLevelFailedProjectionToleranceResult
-
Returns the flange index of the tolerance failing projection.
- flangeOffset() - Method in interface nxopen.features.shipdesign.BuiltUpOffsetBuilder
-
Returns the flange offset used to determin the boundary of seam/split
License requirements: None.
- flangeOffset() - Method in interface nxopen.routing.WatertightFittingsBuilder
-
Returns the offset value for flange creation
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- flangeOffset() - Method in interface nxopen.tooling.DieDesDrawDieBuilder
-
Returns the flange offset, which is the offset value from projected blank curve to flange curve.
- flangePipeContinuity() - Method in interface nxopen.features.SilhouetteFlangeBuilder
-
Returns the flange pipe continuity
License requirements: None.
- flangeProfile() - Method in interface nxopen.die.DieAssistantFlangeProfile
-
Returns the flange profile
License requirements: None.
- flangeProfile() - Method in interface nxopen.die.TrimFlangeDieAssistantBuilder
-
Returns the flange profile
License requirements: None.
- flangeProfile() - Method in interface nxopen.tooling.DieDesDrawPunchBuilder
-
Returns the flange profile, which is used for user defined flange shape.
- flangeProfileDirection() - Method in interface nxopen.die.DieAssistantFlangeProfile
-
Returns the flange profile direction
License requirements: None.
- flangeProfileSet() - Method in interface nxopen.die.TrimFlangeDieAssistantBuilder
-
Returns the flange profile set
License requirements: None.
- flangePropertiesList() - Method in interface nxopen.features.sheetmetal.MultiFlangeBuilder
-
Returns the flange properties list
License requirements: None.
- flangeSearchTolerance1() - Method in interface nxopen.cae.connections.ConnectionData
-
Returns the expansion radius factor1
License requirements: None.
- flangeSearchTolerance2() - Method in interface nxopen.cae.connections.ConnectionData
-
Returns the expansion radius factor2
License requirements: None.
- flangeSide() - Method in interface nxopen.die.DieAssistantFlangeProfile
-
Returns the flange profile reverse flange side indicator
License requirements: None.
- flangeSketch() - Method in interface nxopen.routing.WatertightFittingsBuilder
-
Returns the section used for creating penetration extrude.
- flangeSketchData() - Method in interface nxopen.features.shipdesign.EndCutBuilder
-
Returns the flange sketch data.
- flangeSteelRestrikeParms() - Method in interface nxopen.die.TrimFlangeDieAssistantBuilder
-
TODO: fill in a description for this
License requirements: ug_die_design ("Die Design")
.
- FlangeSteelRibChildBuilder - Interface in nxopen.die
-
Represents a Die Flange Steel Rib Child sub feature.
- FlangeSteelRibParentBuilder - Interface in nxopen.die
-
Represents a Die Flange Steel Rib Parent sub feature.
- flangeSteelWipeParms() - Method in interface nxopen.die.TrimFlangeDieAssistantBuilder
-
TODO: fill in a description for this
License requirements: ug_die_design ("Die Design")
.
- flangeTask(Feature) - Method in interface nxopen.die.DieCollection
-
Creates/Edits the flange task feature builder.
- FlangeTaskBuilder - Interface in nxopen.die
-
Represents a Flange Task feature builder.
- FlangeTaskBuilder.CameraLayerAndXmlpData - Class in nxopen.die
-
- FlangeTaskBuilder.CamTypes - Class in nxopen.die
-
Settings for the cam type of the flange task.
- FlangeTaskBuilder.PierceTypes - Class in nxopen.die
-
Settings for the pierce type of the flange task.
- FlangeTaskBuilder.RegionBoundsData - Class in nxopen.die
-
- FlangeTaskBuilder.SpringbackTypes - Class in nxopen.die
-
Settings for the springback type of the flange task.
- flangeThickness() - Method in interface nxopen.die.ClampingSlotBuilder
-
Returns the thickness of the flange
License requirements: None.
- flangeThickness() - Method in interface nxopen.die.DieShoeBuilder
-
Returns the flange thickness
License requirements: None.
- flangeThickness() - Method in interface nxopen.routing.WatertightFittingsBuilder
-
Returns the thickness value for flange creation
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- flangeType() - Method in interface nxopen.die.DieAssistantFlangeProfile
-
Returns the flange type
License requirements: None.
- flangeType1() - Method in interface nxopen.cae.connections.ConnectionData
-
Returns the flange type1
License requirements: None.
- flangeType2() - Method in interface nxopen.cae.connections.ConnectionData
-
Returns the flange type2
License requirements: None.
- flangeWidth() - Method in interface nxopen.features.shipdesign.SeamBlockBuilder
-
Returns the built up flange width.
- FLANGING - Static variable in class nxopen.tooling.ForceCalculationBuilder.ProcessTypes
-
flanging
- FLARE_BEVEL - Static variable in class nxopen.annotations.LineWeldDataBuilder.WeldSymbolType
-
- FLARE_BEVEL - Static variable in class nxopen.annotations.Symbol
-
Specifies flare bevel weld symbol
- FLARE_V - Static variable in class nxopen.annotations.LineWeldDataBuilder.WeldSymbolType
-
- FLARE_V - Static variable in class nxopen.annotations.Symbol
-
Specifies flare V weld symbol
- FLARED_BEVEL - Static variable in class nxopen.weld.WeldGrooveShape
-
Flared bevel shape
- FLARED_BEVEL_GROOVE - Static variable in class nxopen.weld.WeldGrooveBuilder.Types
-
Flared Bevel Groove
- FLARED_V - Static variable in class nxopen.weld.WeldGrooveShape
-
Flared V shape
- FLARED_VGROOVE - Static variable in class nxopen.weld.WeldGrooveBuilder.Types
-
Flared V Groove
- FLAT - Static variable in class nxopen.annotations.LineWeldDataBuilder.ContourSymbolType
-
- FLAT - Static variable in class nxopen.assemblies.Subset.PartitionViewStyleType
-
Show flat partition view style for subset
- FLAT - Static variable in class nxopen.cam.CutRegionsBuilder.CutRegionsContainmentTypes
-
Flat
- FLAT - Static variable in class nxopen.cam.EditSubopCommand.ContainmentTypes
-
Flat
- FLAT - Static variable in class nxopen.display.Background.CategoryType
-
2D Background
- FLAT - Static variable in class nxopen.facet.CreateTransitionBuilder.Types
-
- FLAT - Static variable in class nxopen.features.NSidedSurfaceBuilder.CenterControlAxisType
-
center flat
- FLAT - Static variable in class nxopen.features.sheetmetal.SheetmetalBendState
-
- FLAT - Static variable in class nxopen.ModelingViewHighQualityImage.ShadeMethod
-
The fastest shading method.
- FLAT - Static variable in class nxopen.uf.UFDisp.ShadeMethod
-
- FLAT_OVAL - Static variable in class nxopen.features.shipdesign.PenetrationRequest.CoutoutType
-
- FLAT_OVAL - Static variable in class nxopen.mechanicalrouting.PathStockPreferenceBuilder.AssignMethod
-
Deprecated.
User specified values, creates flat_oval
space reservation stock.
- FLAT_OVAL - Static variable in class nxopen.mechanicalrouting.PathStockPreferenceBuilder.SpaceReservationMethod
-
User specified values, creates flat_oval
space reservation stock.
- FLAT_OVAL - Static variable in class nxopen.routing.CustomManager.DuctSizeCalculatorDuctShape
-
- FLAT_OVAL - Static variable in class nxopen.routing.DuctSizeCalculatorBuilder.DuctShapeType
-
- FLAT_OVAL - Static variable in class nxopen.routing.PathStockBuilder.AssignMethod
-
User specified values, creates flat_oval
space reservation stock.
- FLAT_TO_BEAD - Static variable in class nxopen.die.AddendumSectionBuilder.SegmentType
-
Update flat to bead segment.
- FLAT_TOP_TYPE - Static variable in class nxopen.uf.UFModl.SmpunchTopType
-
- flatArcToLine - Variable in class nxopen.uf.UFDraw.AskSimplifiedCurveData
-
- flatMetallicPanelBendingBucklingCoefficient(double, double) - Method in interface nxopen.cae.aerostructures.author.ABB
-
Curves for finding the bending buckling stress coefficient for thin flat plates
Used for finding 'kb' the bending buckling stress coefficient as a function of:
'a/b', the panel length ratio
'a' is the unloaded edge length
'b' is the loaded edge length
'beta', is the factor which, divided to b, gives the edge length in compression (while
the remaining edge length is in tension).
- FlatMetallicPanelBendingBucklingCoefficientData() - Constructor for class nxopen.cae.aerostructures.author.ABB.FlatMetallicPanelBendingBucklingCoefficientData
-
- flatMetallicPanelCompressiveBucklingCoefficient(double, double, ABB.UnloadedEdgeSupportType, ABB.EdgeSupportType) - Method in interface nxopen.cae.aerostructures.author.ABB
-
Curves for finding 'kc' the compressive-buckling coefficient for rectangular metallic flat plate
Used for finding 'kc' the compressive-buckling coefficient for rectangular metallic flat plate,
as a function of edge lengths and edge boundary conditions
Input
a Unloaded edge length
b Loaded edge length
BC_Unloaded Type of support along unloaded edges {Clamped-Clamped, Simply Supported-Clamped, Simply Supported-Simply Supported, Free-Clamped, Free-Simply Supported}
BC_Loaded Type of support along loaded edges {Clamped or Simply Supported}
Output
kc Compressive buckling coefficient
Returns
Computation status
License requirements: nx_masterfem ("Finite Element Modeling")
.
- FlatMetallicPanelCompressiveBucklingCoefficientData() - Constructor for class nxopen.cae.aerostructures.author.ABB.FlatMetallicPanelCompressiveBucklingCoefficientData
-
- flatMetallicPanelShearBucklingCoefficient(double, double, ABB.EdgeSupportType) - Method in interface nxopen.cae.aerostructures.author.ABB
-
Curves for finding 'ks' the shear-buckling coefficient for flat rectangular plate
These curves are inspired by Bruhn manual.
- FlatMetallicPanelShearBucklingCoefficientData() - Constructor for class nxopen.cae.aerostructures.author.ABB.FlatMetallicPanelShearBucklingCoefficientData
-
- FLATNESS - Static variable in class nxopen.annotations.FeatureControlFrameBuilder.FcfCharacteristic
-
flatness
- FLATNESS - Static variable in class nxopen.annotations.GeometricCharacteristic
-
Specifies flatness characteristics
- FLATNESS - Static variable in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.CharacteristicOptions
-
flatness
- FLATNESS - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.TolType
-
Flatness
- FLATNESS_TYPE - Static variable in class nxopen.uf.UFGdt.Characteristic
-
- flatnessTolerance() - Method in interface nxopen.geometricanalysis.DupinBuilder
-
Returns the tolerance that defines at the specified point if an area is flat.
- flatOvalHeight() - Method in interface nxopen.mechanicalrouting.PathStockPreferenceBuilder
-
- flatOvalHeight() - Method in interface nxopen.routing.PathStockBuilder
-
- flatOvalRotation() - Method in interface nxopen.routing.PathStockBuilder
-
- flatOvalWidth() - Method in interface nxopen.mechanicalrouting.PathStockPreferenceBuilder
-
- flatOvalWidth() - Method in interface nxopen.routing.PathStockBuilder
-
- flatPattern() - Method in interface nxopen.drawings.ViewStyle
-
Returns object for doing View style settings applicable to Flat Pattern Views.
- FlatPattern - Interface in nxopen.features
-
Represents a Flat Solid feature
To create or edit an instance of this class, use
FlatPatternBuilder
Created in NX5.0.1
- flatPattern() - Method in interface nxopen.features.sheetmetal.ExportFlatPatternBuilder
-
Returns the flat pattern feature
License requirements: None.
- flatPattern() - Method in interface nxopen.preferences.ViewPreferences
-
Returns object for doing View Preferences settings applicable to Flat Patterns .
- FlatPattern.ObjectDataCsys - Class in nxopen.features
-
Structure used to return data about objects in the flat pattern.
- FlatPattern.ObjectDataEdge - Class in nxopen.features
-
Structure used to return data about objects in the flat pattern.
- FlatPattern.ObjectDataFace - Class in nxopen.features
-
Structure used to return data about objects in the flat pattern.
- FlatPattern.ObjectDataGeneral - Class in nxopen.features
-
Structure used to return data about objects in the flat pattern.
- FlatPatternBuilder - Interface in nxopen.features.sheetmetal
-
Represents a Flat Pattern feature builder.
- FlatPatternCalloutTypeDisplay() - Constructor for class nxopen.preferences.PartFlexiblePrintedCircuitDesign.FlatPatternCalloutTypeDisplay
-
- FlatPatternCalloutTypeDisplay(String, int, String) - Constructor for class nxopen.preferences.PartFlexiblePrintedCircuitDesign.FlatPatternCalloutTypeDisplay
-
Constructor for the FlatPatternCalloutTypeDisplay object.
- FlatPatternCalloutTypeDisplay() - Constructor for class nxopen.preferences.PartSheetmetal.FlatPatternCalloutTypeDisplay
-
- FlatPatternCalloutTypeDisplay(String, int, String) - Constructor for class nxopen.preferences.PartSheetmetal.FlatPatternCalloutTypeDisplay
-
Constructor for the FlatPatternCalloutTypeDisplay object.
- FlatPatternCalloutTypeDisplay() - Constructor for class nxopen.sheetmetal.FlatPatternSettings.FlatPatternCalloutTypeDisplay
-
- FlatPatternCalloutTypeDisplay(String, int, String) - Constructor for class nxopen.sheetmetal.FlatPatternSettings.FlatPatternCalloutTypeDisplay
-
Constructor for the FlatPatternCalloutTypeDisplay object.
- flatPatternCompensation() - Method in interface nxopen.features.sheetmetal.JoggleBuilder
-
Returns the flat pattern compensation
License requirements: None.
- flatPatternCompensationAtEnd() - Method in interface nxopen.features.sheetmetal.AdvancedFlangeBuilder
-
Returns the option to apply flat pattern compensation at end of the flange
License requirements: None.
- flatPatternCompensationAtStart() - Method in interface nxopen.features.sheetmetal.AdvancedFlangeBuilder
-
Returns the option to apply flat pattern compensation at start of the flange
License requirements: None.
- FlatPatternObject - Interface in nxopen.drawings
-
Provides an interface to the data available for flat pattern objects on drawing
views.
- flatPatternObject - Variable in class nxopen.features.FlatPattern.ObjectDataCsys
-
Point in the flat pattern
- flatPatternObject - Variable in class nxopen.features.FlatPattern.ObjectDataEdge
-
Curve in the flat pattern
- flatPatternObject - Variable in class nxopen.features.FlatPattern.ObjectDataFace
-
Curve in the flat pattern
- flatPatternObject - Variable in class nxopen.features.FlatPattern.ObjectDataGeneral
-
Object in the flat pattern
- FlatPatternObject.DirectionsData - Class in nxopen.drawings
-
- FlatPatternObjectTypeDisplay() - Constructor for class nxopen.preferences.PartFlexiblePrintedCircuitDesign.FlatPatternObjectTypeDisplay
-
- FlatPatternObjectTypeDisplay(PartFlexiblePrintedCircuitDesign.FlatPatternObjectType, int, NXColor, int, DisplayableObject.ObjectFont, DisplayableObject.ObjectWidth) - Constructor for class nxopen.preferences.PartFlexiblePrintedCircuitDesign.FlatPatternObjectTypeDisplay
-
Constructor for the FlatPatternObjectTypeDisplay object.
- FlatPatternObjectTypeDisplay() - Constructor for class nxopen.preferences.PartSheetmetal.FlatPatternObjectTypeDisplay
-
- FlatPatternObjectTypeDisplay(PartSheetmetal.FlatPatternObjectType, int, NXColor, int, DisplayableObject.ObjectFont, DisplayableObject.ObjectWidth) - Constructor for class nxopen.preferences.PartSheetmetal.FlatPatternObjectTypeDisplay
-
Constructor for the FlatPatternObjectTypeDisplay object.
- FlatPatternObjectTypeDisplay() - Constructor for class nxopen.sheetmetal.FlatPatternSettings.FlatPatternObjectTypeDisplay
-
- FlatPatternObjectTypeDisplay(FlatPatternSettings.FlatPatternObjectType, int, NXColor, ViewDependentDisplayManager.Font, ViewDependentDisplayManager.Width) - Constructor for class nxopen.sheetmetal.FlatPatternSettings.FlatPatternObjectTypeDisplay
-
Constructor for the FlatPatternObjectTypeDisplay object.
- FlatPatternsBuilder - Interface in nxopen.cae
-
Represents a Flat Patterns Builder.
- FlatPatternSettings - Interface in nxopen.sheetmetal
-
Provides access to object and callout properties for sheet-metal data in
flat pattern views on drawings.
- FlatPatternSettings.FlatPatternCalloutTypeDisplay - Class in nxopen.sheetmetal
-
The members of the following structure are the display data for a
callout in a flat pattern drawing member view.
- FlatPatternSettings.FlatPatternObjectType - Class in nxopen.sheetmetal
-
The members of the following enumerated type are used to identify
object types to the FlatPatternView API.
- FlatPatternSettings.FlatPatternObjectTypeDisplay - Class in nxopen.sheetmetal
-
The members of the following structure are the display data for an
object in a flat pattern drawing member view.
- flatPatternView() - Method in interface nxopen.annotations.BendTableBuilder
-
Returns the flat pattern view the bend table is associated to.
- flatPatternViewName() - Method in interface nxopen.features.sheetmetal.FlatPatternBuilder
-
Returns the flat pattern view name string
License requirements: None.
- FlatPatternViewPreferences - Interface in nxopen.preferences
-
Provides access to object and callout properties for sheet-metal data in
flat pattern views on drawings.
- FlatPatternViewStyle - Interface in nxopen.drawings
-
Provides access to object and callout properties for sheet-metal data in
flat pattern views on drawings.
- FlatSolid - Interface in nxopen.features
-
Represents a Flat Solid feature
To create or edit an instance of this class, use
FlatSolidBuilder
Created in NX5.0.0
- FlatSolid.ObjectDataCsys - Class in nxopen.features
-
Structure used to return the objects of a flat solid.
- FlatSolidBuilder - Interface in nxopen.features.sheetmetal
-
Represents a Flat As Solid feature builder.
- FlatSolidBuilder.OrientationType - Class in nxopen.features.sheetmetal
-
The enum defines how to orient flat solid body.
- FlatSolidBuilder.TransformComponentsOption - Class in nxopen.features.sheetmetal
-
The enum defines how to represent PCB components on flat solid.
- flatSolidObject - Variable in class nxopen.features.FlatPattern.ObjectDataCsys
-
Corresponding CSYS on the flat solid
- flatSolidObject - Variable in class nxopen.features.FlatPattern.ObjectDataEdge
-
Corresponding edge on the flat solid
- flatSolidObject - Variable in class nxopen.features.FlatPattern.ObjectDataFace
-
Corresponding bend face on the flat solid
- flatSolidObject - Variable in class nxopen.features.FlatPattern.ObjectDataGeneral
-
Corresponding object on the flat solid
- flatSolidObject - Variable in class nxopen.features.FlatSolid.ObjectDataCsys
-
object on flat solid
- flattenAssembly() - Method in interface nxopen.DxfdwgCreator
-
Returns the flatten assembly - if set to true then assembly structure will not be retained
License requirements: None.
- flattenAssembly() - Method in interface nxopen.IgesCreator
-
Returns the flatten assembly - if set to true the assembly structure will not be retained
License requirements: None.
- flattenAssembly() - Method in interface nxopen.IgesImporter
-
Returns the flatten assembly - if set to true then assembly structure will not be retained
License requirements: None.
- flattenAssembly() - Method in interface nxopen.Step203Importer
-
Returns the flatten assembly - if set to true then assembly structure will not be retained
License requirements: None.
- flattenAssembly() - Method in interface nxopen.Step214Importer
-
Returns the flatten assembly - if set to true then assembly structure will not be retained
License requirements: None.
- flattenAssembly() - Method in interface nxopen.Step242Importer
-
Returns the flatten assembly - if set to true then assembly structure will not be retained
License requirements: None.
- flattenHierarchy() - Method in interface nxopen.annotations.CutSheetBuilder
-
Returns the options specifies whether to flatten hierarchy.
- flattenHierarchy() - Method in interface nxopen.annotations.PinListBuilder
-
Returns the options specifies whether to flatten hierarchy.
- FlatteningAndForming - Interface in nxopen.features
-
- FlatteningAndFormingBuilder - Interface in nxopen.features
-
This class will provide the solution to unwrap 3D non-planar, curved geometry to a 2D plane.
- FlatteningAndFormingBuilder.DestinationFrameData - Class in nxopen.features
-
- FlatteningAndFormingBuilder.DistortionMap - Class in nxopen.features
-
Distortion Map options.
- FlatteningAndFormingBuilder.Types - Class in nxopen.features
-
Flattening Types
- FlatteningAndFormingBuilderEx - Interface in nxopen.features
-
This class will provide the solution to unwrap 3D non-planar, curved geometry to a 2D plane.
- FlatteningAndFormingBuilderEx.Constraints - Class in nxopen.features
-
No constraints options.
- FlatteningAndFormingBuilderEx.DistortionMap - Class in nxopen.features
-
Distortion Map options.
- FlatteningAndFormingBuilderEx.Types - Class in nxopen.features
-
Flattening Types
- FlatteningBuilder - Interface in nxopen
-
- FlatteningBuilder.DistortionMapType - Class in nxopen
-
Deprecated.
This enum defines the distortion map types.
- FlatteningBuilder.FlatteningConstantType - Class in nxopen
-
Deprecated.
This enum defines the flattening constraints types.
- FlatteningBuilder.Types - Class in nxopen
-
Deprecated.
This enum defines the operation types.
- flatteningConstant() - Method in interface nxopen.FlatteningBuilder
-
- flatteningFeature() - Method in interface nxopen.features.FlatteningAndFormingBuilder
-
Returns the flattening feature whose unwrapping mapping can be used to replay the unwrap or wrap on other objects
License requirements: None.
- flatteningFeature() - Method in interface nxopen.features.FlatteningAndFormingBuilderEx
-
Returns the flattening feature whose unwrapping mapping can be used to replay the unwrap or wrap on other objects
License requirements: None.
- FLEX_PCD_SHEETMETAL - Static variable in class nxopen.FileNewApplication
-
Deprecated.
Specifies a Flex Printed Circuit Design sheet metal template
- FLEX_WAIST - Static variable in class nxopen.HumanReachZone.MethodType
-
- flexBodies() - Method in interface nxopen.motion.MotionManager
-
- FlexBody - Interface in nxopen.motion
-
Represents the Motion FlexBody class.It must be associated
with a Motion Link.
- FLEXBODY - Static variable in class nxopen.motion.MotionSolutionBuilder.SolutionTypes
-
Flexible Body Dynamics run
- FlexBodyBuilder - Interface in nxopen.motion
-
- FlexBodyBuilder.Positioning - Class in nxopen.motion
-
Represents positioning type of flexible body
- FlexBodyBuilder.SourceType - Class in nxopen.motion
-
Represents rfi file type of flexible body
- FlexBodyBuilder.UnitSystemType - Class in nxopen.motion
-
Represents unit system
- FlexBodyCollection - Interface in nxopen.motion
-
Represents a collection of flexible body objects
To obtain an instance of this class, refer to
MotionManager
Created in NX7.5.0
- FLEXIBLE_LINK_INITIAL_CONDITION - Static variable in class nxopen.motion.TextBasedElementBuilder.TypeChoices
-
- FLEXIBLE_PRINTED_CIRCUIT_DESIGN - Static variable in class nxopen.features.sheetmetal.ApplicationContext
-
Flexible Printed Circuit Design application context
- FlexibleCable - Interface in nxopen.features
-
Represents a flexible cable
To create or edit an instance of this class, use
FlexibleCableBuilder
Created in NX7.5.0
- FlexibleCableBuilder - Interface in nxopen.features.sheetmetal
-
Represents a Flexible Cable feature builder.
- FlexibleCableBuilder.BendAngleDirectionOptions - Class in nxopen.features.sheetmetal
-
This enum represents the bend angle direction for the bend segment.
- FlexibleCableBuilder.PathAdjustmentAngleDirectionOptions - Class in nxopen.features.sheetmetal
-
This enum represents the path adjustment angle direction for the bend segment.
- FlexibleCableBuilder.SegmentTypeOptions - Class in nxopen.features.sheetmetal
-
Represents the Flexible Cable segment options.
- FlexibleCableSegment - Interface in nxopen.features.sheetmetal
-
Represents a Flexible Cable Segment class.
- FlexPhysicalDampingSettings - Interface in nxopen.motion
-
Represents the physical damping settings for flexible body .
- flip() - Method in interface nxopen.annotations.SingleSidedDisplayBuilder
-
Flips the side of single sided dimension
License requirements: drafting ("DRAFTING")
.
- flip() - Method in interface nxopen.blockstyler.ReverseDirection
-
Returns the Flip.
- flip() - Method in interface nxopen.cae.ElementExtrudeBuilder
-
Flip the direction of extrude - not journalled
License requirements: nx_masterfem ("Finite Element Modeling")
.
- flip() - Method in interface nxopen.cae.ElementSplitBuilder
-
Flip will not be journaled now
License requirements: nx_masterfem ("Finite Element Modeling")
.
- flip() - Method in interface nxopen.geometricutilities.CircularPattern
-
Returns the flip object for 2D mode.
- flip() - Method in interface nxopen.geometricutilities.HorizontalReference
-
Returns the 2D Selection flip attribute.
- flip() - Method in interface nxopen.geometricutilities.PolygonPattern
-
Returns the flip object for 2D mode.
- flip() - Method in interface nxopen.IPlane
-
Returns the flip direction of the plane
License requirements: None.
- Flip - Class in nxopen.routing
-
Describes whether the stock profile is flipped, see the user help documenation on Orient Stock.
- flip() - Method in interface nxopen.tooling.StandardPartBuilder
-
Flips the selected standard part component.
- flip - Variable in class nxopen.uf.UFDrf.AskSymbolMirrorAndFlipData
-
- flip - Variable in class nxopen.uf.UFSo.DirrOnSurfData
-
- FLIP_BLANK - Static variable in class nxopen.tooling.BlankLayoutBuilder.Types
-
the type of flip blank
- flipAlignment() - Method in interface nxopen.positioning.Constraint
-
Reverses the constraint alignment if this is possible.
- flipAllOffsetsOfSection(Section) - Method in interface nxopen.features.AOCSBuilder
-
Reverse the direction of all offsets of the section.
- flipApproachDirection() - Method in interface nxopen.cam.InspectionPathBuilder
-
Flips the approach direction vector
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- flipAxisDirection() - Method in interface nxopen.cam.InspectionCylinderFeatureBuilder
-
Flips the cylinder inspection feature axis direction vector
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- flipAxisDirection() - Method in interface nxopen.cam.InspectionTorusFeatureBuilder
-
Flips the torus inspection feature axis direction vector
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- flipBaseNormalDirection() - Method in interface nxopen.features.GlobalShapingBuilder
-
Returns the flip base normal direction
License requirements: None.
- flipBaseUDirection() - Method in interface nxopen.features.GlobalShapingBuilder
-
Returns the flip base udirection
License requirements: None.
- flipBaseVDirection() - Method in interface nxopen.features.GlobalShapingBuilder
-
Returns the flip base vdirection
License requirements: None.
- flipChamferOffsets() - Method in interface nxopen.features.ResizeChamferBuilder
-
Returns the flip flag
License requirements: None.
- flipComponent() - Method in interface nxopen.formboard.FlipComponentBuilder
-
Flips the selected formboard component by rotation angle
about selected axis.
- flipComponent(Component) - Method in interface nxopen.routing.Run
-
Flips a component that is part of a run by rotating the component so that it's input and output ports reverse.
- FlipComponentBuilder - Interface in nxopen.formboard
-
Builder for flip component operation used in formboard.
- FlipComponentBuilder.AxisType - Class in nxopen.formboard
-
Enum for the selection of axis type for flipping formboard component
- flipControlNormalDirection() - Method in interface nxopen.features.GlobalShapingBuilder
-
Returns the flip control normal direction
License requirements: None.
- flipControlUDirection() - Method in interface nxopen.features.GlobalShapingBuilder
-
Returns the flip control udirection
License requirements: None.
- flipControlVDirection() - Method in interface nxopen.features.GlobalShapingBuilder
-
Returns the flip control vdirection
License requirements: None.
- flipDiagonals() - Method in interface nxopen.cae.MappedMeshBuilder
-
Returns the flip diagonals option
License requirements: None.
- flipDirection() - Method in interface nxopen.annotations.LineWeldBuilder
-
Returns the flip direction for top seam
License requirements: None.
- flipDirection() - Method in interface nxopen.cae.DependentMeshListItemBuilder
-
Returns the flip direction
License requirements: nx_masterfem ("Finite Element Modeling")
.
- flipDirection() - Method in interface nxopen.cae.ManualSweepBetweenListItemSelection
-
Returns the flip direction
License requirements: nx_masterfem ("Finite Element Modeling")
.
- flipDirection() - Method in interface nxopen.cae.MeshManualSweepBetweenListItemSelection
-
Returns the flip direction
License requirements: nx_masterfem ("Finite Element Modeling")
.
- flipDirection() - Method in interface nxopen.cam.BoundaryTurnBlank
-
Returns the flip direction flag
License requirements: None.
- flipDirection() - Method in interface nxopen.cam.fbm.Feature
-
Flip feature direction
License requirements: cam_base ("CAM BASE")
.
- flipDirection() - Method in interface nxopen.features.EmbossTarget
-
Returns the flip flag for translation direction
License requirements: None.
- flipDirection() - Method in interface nxopen.features.shipdesign.PlateBuilder
-
Returns the flip direction, which can change the plate thickness direction.
- flipDirection() - Method in interface nxopen.geometricutilities.FaceSetOffset
-
Flip offset direction.
- flipDirection() - Method in interface nxopen.weld.JointmarkPointsBuilder
-
Returns the flip of Z axis.
- flipDirectionOption() - Method in interface nxopen.cae.Mesh1dBuilder
-
Returns the auto chain option
License requirements: nx_masterfem ("Finite Element Modeling")
.
- flipDiscardRegion - Variable in class nxopen.uf.UFModl.SmcutoutData
-
- flipDiscardRegion - Variable in class nxopen.uf.UFModl.SmpunchData
-
- flipFaceChainDirectionSense(Face) - Method in interface nxopen.features.ExtractFaceBuilder
-
Flip the face chain direction sense
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- flipGun() - Method in interface nxopen.tooldesigner.SetGunApproachBuilder
-
The flip Gun action
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- flipGunDirection() - Method in interface nxopen.tooldesigner.SetGunApproachBuilder
-
Returns the flip gun direction
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- flipHorizontal() - Method in interface nxopen.annotations.LineWeldBuilder
-
Returns the flip horizontal direction for side seam
License requirements: None.
- flipHorizontal() - Method in interface nxopen.display.ImageBaseBuilder
-
Flips the image horizontally.
- flipHorizontal() - Method in interface nxopen.pid.EquipmentBuilder
-
Returns the option to flip the symbol horizontally.
- flipHorizontally() - Method in interface nxopen.pid.OffSheetConnectorBuilder
-
To flip a off sheet connector horizonally
License requirements: nx_pid_design_author ("NX P and ID Design Author")
.
- flipImageAboutHeight(Tag) - Method in interface nxopen.uf.UFDrf
-
- flipImageAboutWidth(Tag) - Method in interface nxopen.uf.UFDrf
-
- flipJoggleSide() - Method in interface nxopen.features.sheetmetal.AeroJoggleBuilder
-
Returns the joggle direction flag.
- flipLineDirection() - Method in interface nxopen.cam.InspectionLineFeatureBuilder
-
Flips direction of line.
- flipMaterial() - Method in interface nxopen.cam.DmRotaryFloorFinishBuilder
-
Flip material side
License requirements: cam_base ("CAM BASE")
.
- flipMaterial() - Method in interface nxopen.cam.DmSurfBuilder
-
The method to flip material side
License requirements: cam_base ("CAM BASE")
.
- flipnormal - Variable in class nxopen.cae.SetManager.TargetSetDistributedPlanesData
-
For the sphere 3 points normal method: flag to flip the normal direction
- flipNormal() - Method in interface nxopen.cam.InspectionArcFeatureBuilder
-
Flips the arc inspection feature normal vector
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- flipNormal() - Method in interface nxopen.cam.InspectionCircleFeatureBuilder
-
Flips the circle inspection feature normal vector
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- flipNormal() - Method in interface nxopen.cam.InspectionCparlnFeatureBuilder
-
Flips the cparln inspection feature normal vector
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- flipNormal() - Method in interface nxopen.cam.InspectionEdgePointFeatureBuilder
-
Flips the edge point inspection feature normal vector
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- flipNormal() - Method in interface nxopen.cam.InspectionLineFeatureBuilder
-
Flips normal of underlying surface
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- flipNormal() - Method in interface nxopen.cam.InspectionPlaneFeatureBuilder
-
Flips the plane inspection feature normal vector
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- flipNormal() - Method in interface nxopen.cam.InspectionPointFeatureBuilder
-
Flips the point inspection feature normal vector
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- flipNormal() - Method in interface nxopen.Sketch
-
Flips the outward normal vector of the sketch
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- flipNormals() - Method in interface nxopen.cae.LaminateExtrudeSetupBuilder
-
Returns the option to flip the element normals for the extrusion process
License requirements: None.
- flipOffset(NXObject) - Method in interface nxopen.features.AOCSBuilder
-
Reverse the offset direction.
- flipOffsetCurveDirection(ICurve, Point3d, boolean) - Method in interface nxopen.features.Offset3DCurveBuilder
-
Routine to store the output curves and the flip logical in the builder
License requirements: solid_modeling ("SOLIDS MODELING")
.
- flipOffsetCurveDirection() - Method in interface nxopen.tooling.ReusePositioningObjectBuilder
-
Flip offset curve direction
License requirements: None.
- FlipOption - Class in nxopen.annotations
-
Specifies the custom symbol flip option.
- flipPath() - Method in interface nxopen.cae.EdgePathMethod
-
Flip the path start and end.
- flipPath() - Method in interface nxopen.cae.ElemEdgePathMethod
-
Flip the path start and end.
- flipPath() - Method in interface nxopen.geometricutilities.BlendStopshortBuilder
-
Flip the builder path for
BlendStopshortBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX8.0.0
- FLIPPED - Static variable in class nxopen.features.shipdesign.ProfileCutoutBuilder.Orientation
-
flipped
- FLIPPED - Static variable in class nxopen.routing.Flip
-
Profile is flipped.
- flipRange() - Method in interface nxopen.facet.SewFacetBodyBuilder
-
Flip the range between the first and second vertex
License requirements: None.
- flipRange1() - Method in interface nxopen.facet.BridgeFacetBodyBuilder
-
Flip the range between the first and second vertex on the first facet body
License requirements: None.
- flipRange2() - Method in interface nxopen.facet.BridgeFacetBodyBuilder
-
Flip the range between the first and second vertex on the second facet body
License requirements: None.
- flipReferenceDirection() - Method in interface nxopen.Sketch
-
Flips the reference direction of the sketch
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- flipState() - Method in interface nxopen.cae.ElementExtrudeBuilder
-
Returns the flip state from the builder
License requirements: nx_masterfem ("Finite Element Modeling")
.
- flipState() - Method in interface nxopen.cae.ElementProjectBuilder
-
Returns the flip state from the builder
License requirements: nx_masterfem ("Finite Element Modeling")
.
- flipState() - Method in interface nxopen.cae.ElementTranslateBuilder
-
Returns the flip state from the builder
License requirements: nx_masterfem ("Finite Element Modeling")
.
- flipState() - Method in interface nxopen.cae.WeldBuilder
-
Returns the flip state of the selected edge(s)
License requirements: nx_masterfem ("Finite Element Modeling")
.
- flipStock() - Method in interface nxopen.routing.OverstockBuilder
-
Returns the stock flip flag
License requirements: routing_advanced ("Routing Advanced") OR routing_harness ("Routing Harness") OR routing_cabling ("Routing Cabling") OR routing_pipetube ("Routing Piping and Tubing") OR routing_hvac ("Routing HVAC") OR routing_platform ("Routing Platform") OR routing_pid ("Routing PID")
.
- flipStock() - Method in interface nxopen.routing.StockBuilder
-
Returns the stock flip flag
License requirements: routing_base ("Routing Basic")
.
- flipSurfaceNormal() - Method in interface nxopen.cam.InspectionEdgePointFeatureBuilder
-
Flips the edge point inspection feature adjacent surface normal vector
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- flipSymbol(FlipOption) - Method in interface nxopen.annotations.BaseCustomSymbol
-
Flips the custom symbol horizontally/vertically.
- flipTargetCurveOrientation() - Method in interface nxopen.features.MatchEdgeBuilder
-
Returns the target curve projection orientation
License requirements: features_modeling ("FEATURES MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- flipThicknessDirection(boolean) - Method in interface nxopen.features.shipdesign.StandardPartFrameworkBuilder
-
- flipToolAroundHolder() - Method in interface nxopen.cam.TurningOperationBuilder
-
Returns the Flip Tool Around Holder toggle
License requirements: None.
- flipToolAroundHolder() - Method in interface nxopen.cam.TurnToolProbingBuilder
-
Returns the Flip Tool Around Holder toggle
License requirements: None.
- flipTrimDirection() - Method in interface nxopen.tooling.BendInsertDesignBuilder
-
Returns the flip trim feature direction of insert.
- flipTrimmedSheet() - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder
-
Flip the trimmed bounded plane or the enlarged surface for parting surface.
- flipVertical() - Method in interface nxopen.annotations.LineWeldBuilder
-
Returns the flip vertical direction for side seam
License requirements: None.
- flipVertical() - Method in interface nxopen.display.ImageBaseBuilder
-
Flips the image vertically.
- flipVertical() - Method in interface nxopen.pid.EquipmentBuilder
-
Returns the option to flip the symbol vertically.
- flipVertically() - Method in interface nxopen.pid.OffSheetConnectorBuilder
-
To flip a off sheet connector vertically
License requirements: nx_pid_design_author ("NX P and ID Design Author")
.
- flipView() - Method in interface nxopen.routing.electrical.CablewaysLayoutView
-
Flips the layout view along view direction.
- flipViewDirection() - Method in interface nxopen.features.shipdesign.SectionViewBuilder
-
Returns the option to specify whether to flip the view direction or not
License requirements: None.
- flipZAxis() - Method in interface nxopen.weld.WeldPointBuilder
-
Flip the z axis
License requirements: ugweld ("UG WELD")
.
- FLOAT - Static variable in class nxopen.annotations.TableCellStyleBuilder.CellFormatTypes
-
Float
- FLOAT - Static variable in class nxopen.annotations.TableCellStyleBuilder.FormatType
-
Deprecated.
- FLOAT - Static variable in class nxopen.mechatronics.ExternalConnectionElementBuilder.DataType
-
float
- FLOAT - Static variable in class nxopen.mechatronics.OPCClientBuilder.TagDataType
-
float type
- FLOAT - Static variable in class nxopen.mechatronics.SignalConnectionBuilder.DataType
-
float
- FLOAT - Static variable in class nxopen.pdm.PdmSoaqueryNxmgrfielddatatype
-
Float
- FLOATING - Static variable in class nxopen.cae.xyplot.LegendTablePositionType
-
The position of legend table can be dragged
- FLOATING - Static variable in class nxopen.cam.DrillTapToolBuilder.ToolTapHolderTypeTypes
-
floating
- FloodFillFacetsRule - Interface in nxopen
-
- FloodFillFacetsRule.Data - Class in nxopen
-
- floor() - Method in interface nxopen.cam.DmCmMultiplePassesCiBuilder
-
Returns the Floor
License requirements: cam_base ("CAM BASE")
.
- FLOOR_AND_CRITICAL_DEPTH - Static variable in class nxopen.cam.CutLevelPlanar.Types
-
Floor, Then Critical Depths
- FLOOR_EQUIPMENT - Static variable in class nxopen.linedesigner.DBNode.NodeType
-
- FLOOR_FIRST - Static variable in class nxopen.cam.DmCmMultiplePassesCiBuilder.OrderType
-
Floor First
- FLOOR_NOT_UP_TO_DATE - Static variable in class nxopen.cam.CAMObject.Attr
-
- FLOOR_ONLY - Static variable in class nxopen.cam.CutLevelPlanar.Types
-
Floor Only
- FLOOR_TO_CEILING - Static variable in class nxopen.cam.GrooveMillingBuilder.LevelSequencingType
-
Floor to Ceiling
- FloorEquipmentBuilder - Interface in nxopen.linedesigner
-
To create a new instance of this class, use nxopen.linedesigner.LineDesignerManager#createFloorequipmentBuilder
Default values.
- floorFaces() - Method in interface nxopen.cam.FeatureRecognitionBuilder
-
Returns the floor faces
License requirements: None.
- floorFaces() - Method in interface nxopen.cam.ManualFeatureBuilder
-
Returns the manual feature floor faces
License requirements: None.
- floorFaces() - Method in interface nxopen.features.AnalyzePocketBuilder
-
Returns the collector of floor faces.
- floorFaces() - Method in interface nxopen.features.BlendPocketBuilder
-
Returns the collector of floor faces.
- floorHeightDim() - Method in interface nxopen.features.vehicledesign.SeatBeltAnchorageBuilder
-
Returns the dimension expression for floor height
License requirements: None.
- floorIncrementBuilder() - Method in interface nxopen.cam.DmCmMultiplePassesCiBuilder
-
Returns the builder of Floor Increment
License requirements: None.
- floorNumberPassesBuilder() - Method in interface nxopen.cam.DmCmMultiplePassesCiBuilder
-
Returns the builder of Floor Number of Passes
License requirements: None.
- floorOrientationType() - Method in interface nxopen.display.Stage
-
Returns the floor orientation define
License requirements: None.
- floorOverlap() - Method in interface nxopen.cam.DriveMode
-
Returns the Floor Overlap Distance
License requirements: None.
- floorPlane() - Method in interface nxopen.cam.GeometryCiBuilder
-
Returns the floor plane
License requirements: None.
- floorRad - Variable in class nxopen.uf.UFModlFeatures.AskCylPocketParmsData
-
- floorRad - Variable in class nxopen.uf.UFModlFeatures.AskRectPocketParmsData
-
- floorSameAsPartStock() - Method in interface nxopen.cam.MillCutParameters
-
Returns the floor same as part stock
License requirements: None.
- floorStepMethodBuilder() - Method in interface nxopen.cam.DmCmMultiplePassesCiBuilder
-
Returns the Floor Step Method Builder
License requirements: cam_base ("CAM BASE")
.
- floorStock() - Method in interface nxopen.cam.CutVolume
-
Returns the floor stock
License requirements: None.
- floorStock() - Method in interface nxopen.cam.MillCutParameters
-
Returns the floor stock
License requirements: None.
- floorStockOffsetBuilder() - Method in interface nxopen.cam.DmCmMultiplePassesCiBuilder
-
Returns the builder of Floor Stock Offset
License requirements: None.
- floorThickness() - Method in interface nxopen.die.HeelpostBuilder
-
Returns the floor thickness
License requirements: None.
- floorThickness() - Method in interface nxopen.linedesigner.FloorEquipmentBuilder
-
Returns the floor thickness
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- floorXaxis() - Method in interface nxopen.display.EnvironmentBuilder
-
The environment's floor to align with the WCS x-axis
License requirements: studio_render ("UG STUDIO RENDER")
.
- floorXaxis() - Method in interface nxopen.display.Stage
-
The stage's bottom wall to align with the WCS x-axis
License requirements: None.
- floorYaxis() - Method in interface nxopen.display.EnvironmentBuilder
-
The environment's floor to align with the WCS y-axis
License requirements: studio_render ("UG STUDIO RENDER")
.
- floorYaxis() - Method in interface nxopen.display.Stage
-
The stage's bottom wall to align with the WCS y-axis
License requirements: None.
- floorZaxis() - Method in interface nxopen.display.EnvironmentBuilder
-
The environment's floor to align with the WCS z-axis
License requirements: studio_render ("UG STUDIO RENDER")
.
- floorZaxis() - Method in interface nxopen.display.Stage
-
The stage's bottom wall to align with the WCS z-axis
License requirements: None.
- FLOW - Static variable in class nxopen.cae.SimResultReference.Type
-
flow result
- flow() - Method in interface nxopen.die.DrawBeadSegmentBuilder
-
Returns the value identifying if the segment is of flow type (the top radius is half the width).
- FLOW_CUT - Static variable in class nxopen.cam.SurfaceContourBuilder.DriveMethodTypes
-
Flow Cut
- FLOW_NONE - Static variable in class nxopen.routing.Port.FlowDirectionType
-
- FLOW_POLYGON_BODIES - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide flow polygon bodies
- FLOW_TYPE_MISMATCH - Static variable in class nxopen.routing.Run.FlipStatus
-
Ports are defined with ambiguous flow types.
- FlowAnalysisBuilder - Interface in nxopen.tooling
-
Represents the builder which is used to create flow analysis.
- flowArrowParameterA() - Method in interface nxopen.preferences.RoutingLogical
-
Returns the application view flow arrow parameter A
License requirements: routing_pid ("Routing PID")
.
- flowArrowParameterB() - Method in interface nxopen.preferences.RoutingLogical
-
Returns the application view flow arrow parameter B
License requirements: routing_pid ("Routing PID")
.
- flowArrowType() - Method in interface nxopen.preferences.RoutingLogical
-
Returns the application view flow arrow type
License requirements: routing_pid ("Routing PID")
.
- FlowBlend - Interface in nxopen.features
-
Represents a flow blend feature
To create or edit an instance of this class, use
FlowBlendBuilder
Created in NX10.0.0
- FlowBlendBuilder - Interface in nxopen.features
-
- FlowBuilder - Interface in nxopen.cam
-
Represents a FlowBuilder Builder
This is an abstract class and cannot be instantiated.
- flowBuilder() - Method in interface nxopen.cam.SurfaceContourBuilder
-
Returns the Flow Cut Drive Method builder
License requirements: None.
- FlowBuilder.FlowEditTypes - Class in nxopen.cam
-
Available types for Flow Cut/Manual Assembly in scop
- FlowBuilder.FlowOffsetModeType - Class in nxopen.cam
-
Available types for Flow Cut/Offset Mode in scop
- flowControl - Variable in class nxopen.uf.UFModl.MatchedgeData
-
- flowCurveCount() - Method in interface nxopen.cam.DPMItpBuilder
-
Returns the flow curve count
License requirements: cam_base ("CAM BASE")
.
- flowCurveList() - Method in interface nxopen.cam.DPMItpBuilder
-
Returns the Flow Curve List
License requirements: None.
- FLOWCUT_BOTH - Static variable in class nxopen.cam.SurfaceContourBuilder.CleanupTypes
-
- FLOWCUT_CONTACTS - Static variable in class nxopen.cam.SurfaceContourBuilder.CleanupTypes
-
- FLOWCUT_TOOLEND - Static variable in class nxopen.cam.SurfaceContourBuilder.CleanupTypes
-
- flowCutDirection() - Method in interface nxopen.cam.FlowCutSteepContainment
-
Returns the Cut Direction
License requirements: None.
- FlowCutSteepContainment - Interface in nxopen.cam
-
Represents a Steep Containment Builder .
- FlowCutSteepContainment.CutDirectionTypes - Class in nxopen.cam
-
Available types for Cut Direction in Flow Cut
- FlowCutSteepContainment.CutLevelTypes - Class in nxopen.cam
-
cut level types .
- FlowCutSteepContainment.PatternDirectionTypes - Class in nxopen.cam
-
Available types for Pattern Direction in Flow Cut
- FlowCutSteepContainment.SteepCutDirectionTypes - Class in nxopen.cam
-
Available types for Steep Cut Direct in Flow Cut
- flowDirection() - Method in interface nxopen.die.LineupBuilder
-
Returns the flow direction of the lineup
License requirements: die_engineering ("DIE ENGINEERING")
.
- flowDirection() - Method in interface nxopen.features.NSidedSurfaceBuilder
-
Returns the flow direction
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- flowDirection() - Method in interface nxopen.features.StudioSurfaceBuilder
-
Returns the flow direction
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- flowDirection() - Method in interface nxopen.features.StudioSurfaceBuilderEx
-
Returns the flow direction
License requirements: None.
- flowDirection() - Method in interface nxopen.features.ThroughCurvesBuilder
-
Returns the flow direction.
- FlowDirection - Interface in nxopen.geometricutilities
-
Represents a
FlowDirection
Allows user to specify different flow direction to control output surface shape.
- FlowDirection.Type - Class in nxopen.geometricutilities
-
flow direction type.
- FlowDirectionArrow - Interface in nxopen.pid
-
A symbol that indicates the direction the of the flow
To create or edit an instance of this class, use
FlowDirectionArrowBuilder
Created in NX11.0.1
- FlowDirectionArrowBuilder - Interface in nxopen.pid
-
- FlowDirectionArrowBuilder.ConnectionData - Class in nxopen.pid
-
- FlowDirectionArrowCollection - Interface in nxopen.pid
-
Represents a collection of FlowDirectionArrow.
- flowDirectionArrows() - Method in interface nxopen.pid.Sheet
-
- flowDirectionType() - Method in interface nxopen.geometricutilities.FlowDirection
-
Returns the flow direction type.
- FlowDisplayBuilder - Interface in nxopen.tooling
-
Represents the builder which is used to create flow analysis.
- FlowDisplayBuilder.AnalysisResults - Class in nxopen.tooling
-
The option of analysis results.
- flowEdit() - Method in interface nxopen.cam.FlowBuilder
-
Returns the Manual Assembly
License requirements: None.
- flowIsActive() - Method in interface nxopen.cam.CycleCoolant
-
Returns the flow status
License requirements: None.
- flowMode() - Method in interface nxopen.cam.CycleCoolant
-
Returns the flow mode
License requirements: None.
- flowOffsetMode() - Method in interface nxopen.cam.FlowBuilder
-
Returns the Flow Cut/Offset Mode
License requirements: None.
- flowOverlapDistBuilder() - Method in interface nxopen.cam.FlowBuilder
-
Returns the flow overlap distance
License requirements: None.
- flowType() - Method in interface nxopen.routing.SplitDuctBuilder
-
Returns the type of flow to be displayed in the list flow column
License requirements: routing_hvac ("Routing HVAC")
.
- fltr() - Method in interface nxopen.UFSession
-
- FLUENCE - Static variable in class nxopen.cae.Result.Quantity
-
- FLUID - Static variable in class nxopen.PhysicalMaterial.Type
-
Fluid
- FLUID_ACOUSTIC_COUPLING_QUALITY - Static variable in class nxopen.cae.Result.Quantity
-
- FLUID_DENSITY - Static variable in class nxopen.cae.Result.Quantity
-
- FLUID_MESH - Static variable in class nxopen.cae.Result.Quantity
-
- FLUID_SCALAR - Static variable in class nxopen.cae.Result.Quantity
-
- FLUID_TEMPERATURE - Static variable in class nxopen.cae.Result.Quantity
-
- FLUID_UNCOUPLED_ACOUSTIC_COUPLING_QUALITY - Static variable in class nxopen.cae.Result.Quantity
-
- FluidDomainBuilder - Interface in nxopen.cae
-
- FluidDomainBuilder.IntExtType - Class in nxopen.cae
-
Represents the interior/exterior types.
- FluidDomainBuilder.OutputOptionsType - Class in nxopen.cae
-
Represents the output types.
- FluidDomainBuilder.SubdivisionType - Class in nxopen.cae
-
Represents the subdivision types.
- FluidDomainCollection - Interface in nxopen.cae
-
Provides methods for managing fluid domains
FluidDomainRecipe
in a fem part
To obtain an instance of this class, refer to
BaseFEModel
Created in NX7.5.2
- FluidDomainRecipe - Interface in nxopen.cae
-
Represents a FluidDomainRecipe
To create or edit an instance of this class, use
FluidDomainBuilder
Created in NX8.0.0
- fluidDomains() - Method in interface nxopen.cae.BaseFEModel
-
Returns the fluid domain collection belonging to this fem part .
- FLUSH - Static variable in class nxopen.annotations.LineWeldDataBuilder.ContourSymbolType
-
- FLUSH - Static variable in class nxopen.annotations.SupplementarySymbol
-
Specifies flush supplementary weld symbol
- Flush() - Constructor for class nxopen.uf.UFPath.Flush
-
- Flush(UFPath.FlushType, UFPath.Guide, UFPath.Pressure, boolean, boolean, boolean) - Constructor for class nxopen.uf.UFPath.Flush
-
- FLUSH - Static variable in class nxopen.weld.FilletBuilder.EnumContour
-
- FLUSH - Static variable in class nxopen.weld.PlugSlotBuilder.EnumContour
-
- FLUSH - Static variable in class nxopen.weld.WeldContourShape
-
Flush shape
- FLUSH - Static variable in class nxopen.weld.WeldGrooveBuilder.Contour
-
Flush
- FLUSH_OFF - Static variable in class nxopen.uf.UFPath.FlushType
-
- FLUSH_ON - Static variable in class nxopen.uf.UFPath.FlushType
-
- FLUSH_TYPE_LAST_ELEMENT - Static variable in class nxopen.uf.UFPath.FlushType
-
- flushingGuide - Variable in class nxopen.uf.UFPath.Flush
-
- flushingPressure - Variable in class nxopen.uf.UFPath.Flush
-
- FLUSHNESS_ONLY - Static variable in class nxopen.geometricanalysis.GapFlushnessBuilder.DisplayOptions
-
flushness only
- flushRegister - Variable in class nxopen.uf.UFPath.Flush
-
- flushType - Variable in class nxopen.uf.UFPath.Flush
-
- FLUTE_LENGTH - Static variable in class nxopen.cam.DimensionRule.Types
-
Tool Flute Length Percentage
- fluteLength() - Method in interface nxopen.features.AnalyzePocketBuilder
-
Returns the flute length defines the length of the flute of T Cutter.
- fluteLength() - Method in interface nxopen.features.BlendPocketBuilder
-
Returns the flute length defines the length of the flute of T Cutter.
- FMBD_FILE_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- FMBD_FILE_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- FMI - Static variable in class nxopen.motion.TextBasedElementBuilder.TypeChoices
-
- FNR - Static variable in class nxopen.cam.GrooveToolBuilder.InsertShapes
-
Full nose radius groove tool
- FOAM - Static variable in class nxopen.PhysicalMaterial.Type
-
Foam
- FOAMTESTDATA - Static variable in class nxopen.PhysicalMaterial.Type
-
Foam - test data option
- focalDiameter() - Method in interface nxopen.cam.LaserTool
-
Returns the Focal Diameter
License requirements: None.
- focalDistance() - Method in interface nxopen.cam.LaserTool
-
Returns the Focal Distance
License requirements: None.
- focalDistance() - Method in interface nxopen.display.CameraBuilder
-
Returns the focal distance
License requirements: None.
- focalLength() - Method in interface nxopen.Parabola
-
Returns the focal length.
- focus() - Method in interface nxopen.blockstyler.UIBlock
-
Focuses on the block.
- focus() - Method in interface nxopen.uistyler.MultiSelectList
-
Indicates that this dialog item is receiving keyboard focus.
- focusNotify(UIBlock, boolean) - Method in interface nxopen.blockstyler.BlockDialog.FocusNotify
-
Focus notify callback.
- focusPlates() - Method in interface nxopen.features.shipdesign.ShipStructureBuilder
-
Returns the focus plates list, just used in basic design.
- fogBack - Variable in class nxopen.uf.UFView.FogOptions
-
- fogBack - Variable in class nxopen.uf.UFView.Visualization
-
- fogBackgroundColor() - Method in interface nxopen.preferences.ViewVisualizationSpecialEffects
-
Returns the use background color flag.
- fogBackValue() - Method in interface nxopen.preferences.ViewVisualizationSpecialEffects
-
Returns the fog back scale value.
- fogColor - Variable in class nxopen.preferences.ViewVisualizationSpecialEffects.FogData
-
Fog Color
- fogColor - Variable in class nxopen.uf.UFView.FogOptions
-
- fogColor - Variable in class nxopen.uf.UFView.Visualization
-
- fogColorFlag - Variable in class nxopen.preferences.ViewVisualizationSpecialEffects.FogData
-
If true fog color is applied to the view
- fogColorHLSValue() - Method in interface nxopen.preferences.ViewVisualizationSpecialEffects
-
Returns the value of HLS color pattern
License requirements: None.
- fogColorHSVValue() - Method in interface nxopen.preferences.ViewVisualizationSpecialEffects
-
Returns the value of HSV color pattern
License requirements: None.
- fogColorRGBValue() - Method in interface nxopen.preferences.ViewVisualizationSpecialEffects
-
Returns the value of RGB color pattern
License requirements: None.
- FogData() - Constructor for class nxopen.preferences.ViewVisualizationSpecialEffects.FogData
-
- FogData(int, boolean, ViewVisualizationSpecialEffects.ColorRGB, double, double, double) - Constructor for class nxopen.preferences.ViewVisualizationSpecialEffects.FogData
-
Constructor for the FogData object.
- fogDensity - Variable in class nxopen.preferences.ViewVisualizationSpecialEffects.FogData
-
Density of fog
- fogEnd - Variable in class nxopen.preferences.ViewVisualizationSpecialEffects.FogData
-
End of fog
- fogFront - Variable in class nxopen.uf.UFView.FogOptions
-
- fogFront - Variable in class nxopen.uf.UFView.Visualization
-
- fogFrontValue() - Method in interface nxopen.preferences.ViewVisualizationSpecialEffects
-
Returns the fog front scale value.
- fogMode - Variable in class nxopen.preferences.ViewVisualizationSpecialEffects.FogData
-
Fog mode
- fogMode - Variable in class nxopen.uf.UFView.FogOptions
-
- fogMode - Variable in class nxopen.uf.UFView.Visualization
-
- FogOptions() - Constructor for class nxopen.uf.UFView.FogOptions
-
- FogOptions(int, double[], double, double, double) - Constructor for class nxopen.uf.UFView.FogOptions
-
- fogRate - Variable in class nxopen.uf.UFView.FogOptions
-
- fogRate - Variable in class nxopen.uf.UFView.Visualization
-
- fogRateValue() - Method in interface nxopen.preferences.ViewVisualizationSpecialEffects
-
Returns the fog rate value.
- fogSetting() - Method in interface nxopen.preferences.ViewVisualizationSpecialEffects
-
Returns the fog setting type
License requirements: None.
- fogSettingOption() - Method in interface nxopen.preferences.ViewVisualizationSpecialEffects
-
Returns the fog option.
- fogStart - Variable in class nxopen.preferences.ViewVisualizationSpecialEffects.FogData
-
Start of fog
- FOLD - Static variable in class nxopen.features.sheetmetal.BridgeTransitionBuilder.TypeOptions
-
Bridge Transition type consisting of Planar-Bend-Planar regions.
- FOLD_JOINT - Static variable in class nxopen.annotations.LineWeldDataBuilder.WeldSymbolType
-
- FOLD_JOINT - Static variable in class nxopen.annotations.Symbol
-
Specifies fold joint weld symbol
(ISO and DIN only, only on one side of reference line)
- foldAngle - Variable in class nxopen.uf.UFDrf.FoldedRadiusInfo
-
- foldBendOptions() - Method in interface nxopen.features.sheetmetal.BridgeTransitionBuilder
-
Returns the bend options for
BridgeTransitionBuilder.TypeOptions.FOLD
bridge bend
The bend options object stores additional parameters for the bend, such as bend radius, neutral factor, bend
relief width and depth.
- FOLDED_RADIUS - Static variable in class nxopen.annotations.DimensionType
-
Folded Radius dimension
- FOLDED_SXLINE - Static variable in class nxopen.uf.UFDraw.SxlineType
-
- foldedEdges() - Method in interface nxopen.facet.CleanupFacetBodyBuilder
-
Returns the option to identify or repair facets having an angle with adjacent facets less than a specified minimum value
License requirements: None.
- foldedRadiusAngle() - Method in interface nxopen.annotations.DiameterRadiusPreferences
-
Returns the interior angle for folded radius type dimension
License requirements: None.
- foldedRadiusAngle() - Method in interface nxopen.annotations.RadialStyleBuilder
-
Returns the folded radius angle
License requirements: None.
- foldedRadiusAngle - Variable in class nxopen.uf.UFDrf.DiameterRadiusPreferences
-
- FoldedRadiusDimension - Interface in nxopen.annotations
-
Represents a folded radius dimension
To create or edit an instance of this class, use
RadialDimensionBuilder
Created in NX4.0.0
- FoldedRadiusInfo() - Constructor for class nxopen.uf.UFDrf.FoldedRadiusInfo
-
- FoldedRadiusInfo(double[], double, double) - Constructor for class nxopen.uf.UFDrf.FoldedRadiusInfo
-
- foldedToggle() - Method in interface nxopen.drawings.SketchSectionLineBuilder
-
Returns the folded toggle
License requirements: None.
- FOLDER - Static variable in class nxopen.annotations.ImportAutocadBlockBuilder.FileFolder
-
Folder Selection mode
- FOLDER - Static variable in class nxopen.annotations.ImportSymbolBuilder.FileFolder
-
Folder Selection mode
- Folder - Interface in nxopen.cae.connections
-
The Folder class offers a way to create a hierarchy of connections and sub-folders
To obtain an instance of this object use the add_folder creator in a parent folder or access connection root folder from
IFEModel
Created in NX12.0.0
- folder() - Method in interface nxopen.drafting.DrawingCreationWizardBuilder
-
Returns the folder.
- folderBrowser() - Method in interface nxopen.tooling.FlowDisplayBuilder
-
Returns the folder in which flow analysis results can be found
License requirements: None.
- folderContents - Variable in class nxopen.uf.UFUgmgr.ListFolderContentsData
-
- folderName() - Method in interface nxopen.layout2d.LocalDefinitionFolderBuilder
-
Returns the current folder name
License requirements: nx_layout ("NX Layout")
.
- folderName() - Method in interface nxopen.linedesigner.ExportPlantToDWGBuilder
-
Returns the folder name
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- folderName() - Method in interface nxopen.linedesigner.ExportToDWGBuilder
-
Returns the folder name
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- folderPath() - Method in interface nxopen.ame.ExportEClassMappingBuilder
-
Returns the output folder path to save eclass mapping file
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- FolderSelection - Interface in nxopen.blockstyler
-
Represents Folder Selection With Browse block .
- folderType() - Method in interface nxopen.cae.SimLbcFolder
-
Returns the folder type
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- folderType() - Method in interface nxopen.issue.IssueFolder
-
Returns the folder type
License requirements: nx_issue_mgmt ("NX Issue Tracking")
.
- foldLocation() - Method in interface nxopen.annotations.BaseRadialDimensionBuilder
-
Returns the fold location
License requirements: None.
- foldLocation() - Method in interface nxopen.routing.RouteSweptFoldBuilder
-
Returns the fold location
License requirements: routing_harness ("Routing Harness")
.
- foldLocation - Variable in class nxopen.uf.UFDrf.FoldedRadiusInfo
-
- foldOffset - Variable in class nxopen.uf.UFDrf.FoldedRadiusInfo
-
- foldRotationAngle() - Method in interface nxopen.routing.RouteSweptFoldBuilder
-
Returns the fold rotation angle
License requirements: routing_harness ("Routing Harness")
.
- foldStartRotationAngle() - Method in interface nxopen.routing.RouteSweptFoldBuilder
-
Returns the fold start rotation angle
License requirements: routing_harness ("Routing Harness")
.
- foldTransitionType() - Method in interface nxopen.features.sheetmetal.BridgeTransitionBuilder
-
Returns the option to get fold transition type.
- FOLIO - Static variable in class nxopen.cam.InspectionGraphicalReportOutputBuilder.PageSizeType
-
- FOLIO - Static variable in class nxopen.cam.WorkInstructionOutputBuilder.PageSizeType
-
- FOLIO - Static variable in class nxopen.PrintBuilder.PaperSize
-
Folio, 8 1/2- by 13-inch paper
- FOLLOW - Static variable in class nxopen.cam.AcrossVoids.MotionTypes
-
Follow
- FOLLOW_BLADE_UV - Static variable in class nxopen.cam.ToolAxisAdvanced.Type
-
Follow Blade UV
- FOLLOW_BOUNDARY - Static variable in class nxopen.cam.NcmPlanarBuilder.TransferWithinLevelsWiths
-
follow boundary (for future use)
- FOLLOW_CSYS - Static variable in class nxopen.geometricutilities.PatternOrientation.Enum
-
follow CSYS orientation, for general pattern type, when from/to is CSYS.
- FOLLOW_FILLET - Static variable in class nxopen.SelectionIntentRule.RuleType
-
- FOLLOW_LAST_DEFINED - Static variable in class nxopen.HumanData.InverseKinematicsHeadEyeType
-
Indicate the position of head and eye follow the last defined position
- FOLLOW_PART - Static variable in class nxopen.cam.CutPatternBuilder.Types
-
Follow Part
- FOLLOW_PART - Static variable in class nxopen.cam.TurnGrooveCornerControl.CornerTypes
-
Groove Corner Control corner type is Follow Part.
- FOLLOW_PATTERN - Static variable in class nxopen.geometricutilities.PatternOrientation.Enum
-
follow pattern orientation, for example, circular pattern type.
- FOLLOW_PERIPHERY - Static variable in class nxopen.cam.CutPatternBuilder.Types
-
Follow Periphery
- FOLLOW_PERIPHERY - Static variable in class nxopen.cam.DmAmBuilder.AmCutPatternTypes
-
Follow Periphery
- FOLLOW_PERIPHERY - Static variable in class nxopen.cam.DmBndBuilder.BndCutPatternTypes
-
Follow Periphery
- FOLLOW_PERIPHERY - Static variable in class nxopen.cam.DmSurfBuilder.DmSurfCutPatternType
-
None
- FOLLOW_SHORTEST_PATH - Static variable in class nxopen.mechatronics.PositionControlBuilder.AngularPathOptions
-
follow shortest path
- FOLLOW_SHOULDER - Static variable in class nxopen.cam.CutParametersCleanupControlTypes
-
Cleanup control: Follow Shoulder
- FOLLOW_WALL_BOTTOM - Static variable in class nxopen.cam.PlanarOperationBuilder.AutomaticPartBoundaryMethodTypes
-
Follow Bottom
- FOLLOW_WALL_TOP - Static variable in class nxopen.cam.PlanarOperationBuilder.AutomaticPartBoundaryMethodTypes
-
Follow Top
- FOLLOW_WITH - Static variable in class nxopen.tooling.LsdynaGeometryPreparationBuilder.ProcessActionBinder
-
The process action for binder is follow with other draw components.
- FOLLOW_WITH - Static variable in class nxopen.tooling.LsdynaGeometryPreparationBuilder.ProcessActionDie
-
The process action for die is follow with other draw components.
- FOLLOW_WITH - Static variable in class nxopen.tooling.LsdynaGeometryPreparationBuilder.ProcessActionPunch
-
The process action for punch is follow with other draw components.
- followCheck() - Method in interface nxopen.cam.MillCutParameters
-
Returns the follow check geometry status
License requirements: None.
- followCurve() - Method in interface nxopen.routing.ISegment
-
Returns the segment follow curve.
- FollowCurveMoveBuilder - Interface in nxopen.cam
-
- followFaceProjDirOption() - Method in interface nxopen.geometricutilities.PatternOrientation
-
Returns the followFaceProjDirOption, an enum for follow face project direction.
- followFaceSelection() - Method in interface nxopen.geometricutilities.PatternOrientation
-
Returns the followFaceSelection, a sc collector to store selected faces.
- followFaceToggle() - Method in interface nxopen.geometricutilities.PatternOrientation
-
Returns the followFaceToggle, a logical flag to indicate if the we need to modify the orientation to follow selected faces.
- followFillet() - Method in interface nxopen.blockstyler.SectionBuilder
-
Returns the FollowFillet
License requirements: None.
- followFillet() - Method in interface nxopen.blockstyler.SuperSection
-
Returns the FollowFillet
License requirements: None.
- FollowFilletRule - Interface in nxopen
-
Represents a
SelectionIntentRule
that collects curves/edges which are connected or tangent connected and follow onto and off an untrimmed fillet.
- FollowFilletRule.Data - Class in nxopen
-
- FollowFilletRuleType - Class in nxopen
-
Selection Intent method to use with follow fillet rule.
- followFoot() - Method in interface nxopen.features.HumanBuilder
-
Returns the status of follow foot move for dynamic drag of left foot or right foot.
- FollowGeometryMoveBuilder - Interface in nxopen.cam
-
Represents the Follow Geometry Move Builder
This is an abstract class, and cannot be created.
- followNonVerticalWalls() - Method in interface nxopen.cam.VolumeBased25DMillingOperationBuilder
-
Returns the follow non-vertical walls flag
License requirements: None.
- FollowPartMoveBuilder - Interface in nxopen.cam
-
- FollowPartMoveBuilder.MoveDirectionTypes - Class in nxopen.cam
-
Available types for manual move path direction in GMC operation
- FOLLOWS_FLOW - Static variable in class nxopen.routing.Run.FlipStatus
-
Ports correctly aligned with flow.
- followWallBottom() - Method in interface nxopen.cam.DmCmBuilder
-
Returns the Follow Wall Bottom
License requirements: None.
- font() - Method in interface nxopen.annotations.CuttingPlaneSymbolBuilder
-
Returns the font
License requirements: None.
- font() - Method in interface nxopen.annotations.EditSymbolDisplayBuilder
-
Returns the enum font
License requirements: None.
- font - Variable in class nxopen.annotations.LineCfw
-
Line font (solid, dashed, etc)
- font - Variable in class nxopen.annotations.TextCfw
-
Character font (blockfont, etc).
- font - Variable in class nxopen.cae.modelcheck.ElementEdgeCheckBuilder.EdgeDisplayStyle
-
line font
- font - Variable in class nxopen.cae.Post.Text
-
- font() - Method in interface nxopen.cae.xyplot.BaseLineStyleSetting
-
Returns the line font
License requirements: None.
- font() - Method in interface nxopen.cae.xyplot.ICurveDisplaySettings
-
Returns the line font
License requirements: None.
- font() - Method in interface nxopen.cae.xyplot.TextStyleSetting
-
Returns the text font
License requirements: None.
- font() - Method in interface nxopen.drawings.SectionLineStyleBuilder
-
- font() - Method in interface nxopen.drawings.ViewStyleFPCurvesBuilder
-
Returns the font on the Curve section of the Flat Pattern tab of the View Style Dialog
License requirements: None.
- font() - Method in interface nxopen.drawings.ViewStyleHiddenLinesBuilder
-
Returns the font on the HIDDEN LINES tab of the View Style Dialog
License requirements: None.
- font() - Method in interface nxopen.drawings.ViewStyleSmoothEdgesBuilder
-
Returns the font on the SMOOTH EDGES tab of the View Style Dialog
License requirements: None.
- font() - Method in interface nxopen.drawings.ViewStyleVirtualIntersectionsBuilder
-
Returns the font on the VIRTUAL INTERSECTIONS tab of the View Style Dialog
License requirements: None.
- font() - Method in interface nxopen.features.CurveFeature
-
Returns the font of the feature
License requirements: None.
- font() - Method in interface nxopen.features.shipdesign.ShipDesignPreferencesBuilder
-
Returns the default font to use for the current ship structure type.
- font() - Method in interface nxopen.features.TextBuilder
-
Returns the font
License requirements: None.
- Font - Class in nxopen.preferences
-
Represents the line font
- font() - Method in interface nxopen.preferences.PartDrafting
-
Returns the line font of the retained
Annotation
objects
License requirements: None.
- font - Variable in class nxopen.preferences.PartFlexiblePrintedCircuitDesign.FlatPatternObjectTypeDisplay
-
Object font
- font - Variable in class nxopen.preferences.PartFlexiblePrintedCircuitDesign.PlanarSegmentCurveTypeDisplayData
-
Curve font
- font - Variable in class nxopen.preferences.PartSheetmetal.FlatPatternObjectTypeDisplay
-
Object font
- font - Variable in class nxopen.preferences.PartSheetmetal.TabCurveTypeDisplayData
-
Curve font
- font - Variable in class nxopen.sheetmetal.FlatPatternSettings.FlatPatternObjectTypeDisplay
-
Object font
- font - Variable in class nxopen.uf.UFDisp.ConeheadAttrbSTag
-
- font - Variable in class nxopen.uf.UFDisp.SystemParams
-
- font - Variable in class nxopen.uf.UFDrf.AskRetainColorFontWidthData
-
- font - Variable in class nxopen.uf.UFDrf.Cfw
-
- font - Variable in class nxopen.uf.UFDrf.TextCfw
-
- font - Variable in class nxopen.uf.UFObj.DispProps
-
- font - Variable in class nxopen.uf.UFView.VdeData
-
- font - Variable in class nxopen.uf.UFView.VdeDataAndType
-
- FontCollection - Interface in nxopen
-
Represents a collection of typographical fonts (for example, Arial, OldEnglish)
To obtain an instance of this class, refer to
BasePart
Created in NX3.0.0
- FontCollection.Type - Class in nxopen
-
Specifies the type of font
- fontColor - Variable in class nxopen.uf.UFSfLegend.Attr
-
- FontEnum - Class in nxopen.diagramming
-
the font
- FontEnum - Class in nxopen.drawings
-
the font
- fontFace() - Method in interface nxopen.cam.WorkInstructionBuilder
-
Returns the text font face
License requirements: None.
- fontfamily - Variable in class nxopen.preferences.VisualizationFonts.DefaultStandardTextFontData
-
the name of the font family
- FontHeader() - Constructor for class nxopen.uf.UFUgfont.FontHeader
-
- FontHeader(int, int, int, int, int, int, int, int, int, double, double, double, int) - Constructor for class nxopen.uf.UFUgfont.FontHeader
-
- fontInfo - Variable in class nxopen.uf.UFDrf.AskUdSymbolFontInfoData
-
- fonts() - Method in interface nxopen.BasePart
-
Returns the FontCollection instance belonging to this part .
- fonts - Variable in class nxopen.uf.UFCgm.ExportOptions
-
- fontScale - Variable in class nxopen.cae.Post.PostviewGetFontSizeData
-
- fontScaling() - Method in interface nxopen.cae.PostAnnotationPreference
-
Returns the annotation font scaling toggle
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- fontSize() - Method in interface nxopen.cam.WorkInstructionBuilder
-
Returns the text font size
License requirements: None.
- fontsize - Variable in class nxopen.preferences.VisualizationFonts.DefaultStandardTextFontData
-
the font size in points (72 points per inch)
- fontSize - Variable in class nxopen.uf.UFSfLegend.Attr
-
- fontStyle() - Method in interface nxopen.cae.xyplot.TextStyleSetting
-
Returns the text font style.
- fontStyle() - Method in interface nxopen.display.TransientText
-
Returns the style of font to be used to display the transient text.
- fontStyle() - Method in interface nxopen.features.TextBuilder
-
Returns the font style
License requirements: None.
- fontstyle - Variable in class nxopen.preferences.VisualizationFonts.DefaultStandardTextFontData
-
the font style
- Fonttype - Class in nxopen.cae.xyplot
-
Represents the font type
- fontType() - Method in interface nxopen.cae.xyplot.TextStyleSetting
-
Returns the text font type
License requirements: None.
- fontValue() - Method in interface nxopen.blockstyler.TextColorFontWidth
-
Returns the font value
License requirements: None.
- FOOT - Static variable in class nxopen.HumanData.HandFootType
-
Indicate the foot
- FOOT - Static variable in class nxopen.HumanData.SegmentScalingType
-
Indicate scaling of foot
- FOOT_BREADTH - Static variable in class nxopen.HumanData.AdvancedScalingType
-
Indicate scaling of foot_breadth
- FOOT_LENGTH - Static variable in class nxopen.HumanData.AdvancedScalingType
-
Indicate scaling of foot_length
- FOOT_POUNDAL - Static variable in class nxopen.motion.FlexBodyBuilder.UnitSystemType
-
(poundal)(ft)(lbm)
- FOOT_POUNDAL_F - Static variable in class nxopen.motion.FlexBodyBuilder.UnitSystemType
-
(lbf)(ft)(slug)
- footer - Variable in class nxopen.uf.UFSfLegend.Attr
-
- force() - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
Returns the force on blank holder.
- force() - Method in interface nxopen.cae.DurSpecialistSuperpositionEventBuilder
-
Returns the unit load force
License requirements: None.
- FORCE - Static variable in class nxopen.cae.FrfSet.Measure
-
Force
- FORCE - Static variable in class nxopen.cae.ResultParametersWithNodalForceReport.ResultType
-
- FORCE - Static variable in class nxopen.cae.XyFunctionMeasure
-
Force unit
- FORCE - Static variable in class nxopen.mechatronics.BreakingConstraintBuilder.BreakingModeType
-
Force
- FORCE - Static variable in class nxopen.motion.ControlOutputBuilder.VariableType
-
Output Variable type Force
- FORCE - Static variable in class nxopen.motion.GraphBuilder.RequestChoices
-
Deprecated.
Force
- FORCE - Static variable in class nxopen.motion.MotionSensorBuilder.Types
-
- FORCE - Static variable in class nxopen.Scalar.DimensionalityType
-
- FORCE - Static variable in class nxopen.tooling.LsdynaGeometryPreparationBuilder.ProcessActionBinder
-
The process action for binder is by force.
- FORCE - Static variable in class nxopen.tooling.LsdynaGeometryPreparationBuilder.ProcessActionDie
-
The process action for die is by force.
- FORCE - Static variable in class nxopen.tooling.LsdynaGeometryPreparationBuilder.ProcessActionPunch
-
The process action for punch is by force.
- FORCE_BF - Static variable in class nxopen.cae.XyFunctionUnit
-
Force unit: lbf
- FORCE_CN - Static variable in class nxopen.cae.XyFunctionUnit
-
Force unit: centi-Newtons
- FORCE_COLOR - Static variable in class nxopen.tooling.SpreadsheetData.ParameterStatus
-
If the parameter uses user value, normally it shows in UI in a different color.
- FORCE_COLOR - Static variable in class nxopen.tooling.SpreadsheetDataParameter.Status
-
If the parameter uses user value, normally it shows in UI in a different color.
- FORCE_DENSITY - Static variable in class nxopen.cae.Result.Quantity
-
- FORCE_DENSITY_AREA - Static variable in class nxopen.cae.Result.Quantity
-
- FORCE_KGF - Static variable in class nxopen.cae.XyFunctionUnit
-
Force unit: kilogram-Force
- FORCE_LOAD_AND_TURRET_TOOL - Static variable in class nxopen.uf.UFCamPref.CamPref
-
- FORCE_MN - Static variable in class nxopen.cae.XyFunctionUnit
-
Force unit: mN
- FORCE_N - Static variable in class nxopen.cae.XyFunctionUnit
-
Force unit: N
- FORCE_POUNDAL - Static variable in class nxopen.cae.XyFunctionUnit
-
Force unit: Poundal
- FORCE_UPDATE - Static variable in class nxopen.tooling.MWPartingManagerBuilder.DataStatus
-
Data needs force update.
- forceCalculation() - Method in interface nxopen.motion.BushingDefine
-
Returns the force calculation option
License requirements: mechanisms ("MECHANISMS")
.
- forceCalculation() - Method in interface nxopen.tooling.ToolingManager
-
Returns the ForceCalculation instance belonging to this part .
- ForceCalculationBuilder - Interface in nxopen.tooling
-
- ForceCalculationBuilder.CalculationTypes - Class in nxopen.tooling
-
The calculation type.
- ForceCalculationBuilder.ProcessTypes - Class in nxopen.tooling
-
The process type.
- ForceCalculationCollection - Interface in nxopen.tooling
-
- FORCED_CONSTANT - Static variable in class nxopen.features.FaceBlendBuilder.WidthMethod
-
Forced Constant
- forcedDirection() - Method in interface nxopen.features.SweptVolumeBuilder
-
Returns the forced direction
License requirements: None.
- forcedWelcomeMode() - Method in interface nxopen.preferences.SessionDrafting
-
Returns the Drafting Welcome mode, for autotests only
License requirements: None.
- forceExponent() - Method in interface nxopen.motion.BodyContactLms
-
Returns the force exponent
License requirements: None.
- forceExponent() - Method in interface nxopen.motion.BodyContactSphereToCAD
-
Returns the force exponent
License requirements: None.
- forceExponent - Variable in class nxopen.uf.UFMotion.ContactParameters
-
- forceExponentExpression() - Method in interface nxopen.motion.BodyContactAdams
-
Returns the force exponent expression
License requirements: None.
- forceExponentExpression() - Method in interface nxopen.motion.BodyContactRecurdyn
-
Returns the force exponent expression
License requirements: None.
- forceExponentExpression() - Method in interface nxopen.motion.CurveContactAdams
-
Returns the force exponent expression
License requirements: None.
- forceExponentExpression() - Method in interface nxopen.motion.CurveContactRecurdyn
-
Returns the force exponent expression
License requirements: None.
- forceFitDistance() - Method in interface nxopen.tooling.EjectorPostProcessingBuilder
-
Returns the option is used to determine whether or not to force the use of the fit distance value from the UI, instead of the value from the ejector pin part
License requirements: None.
- forceFunction - Variable in class nxopen.uf.UFMotion.ScalarForceTorque
-
- forceModel() - Method in interface nxopen.motion.BodyContactLms
-
Returns the force model
License requirements: None.
- forceModelTolerance() - Method in interface nxopen.motion.BodyContactLms
-
Returns the force model tolerance
License requirements: None.
- forceModelType() - Method in interface nxopen.motion.BodyContactAdams
-
Returns the force model type
License requirements: None.
- forceModelType() - Method in interface nxopen.motion.BodyContactRecurdyn
-
Returns the force model type
License requirements: None.
- forceModelType - Variable in class nxopen.uf.UFMotion.Motion3DContact
-
- forcePreloadExpression() - Method in interface nxopen.motion.JointFrictionAdams
-
Returns the force preload expression
License requirements: None.
- forcePreloadExpression() - Method in interface nxopen.motion.JointFrictionRecurDyn
-
Returns the force preload expression
License requirements: None.
- forceProcess() - Method in interface nxopen.tooling.ForceCalculationBuilder
-
Returns the process used to calculate force.
- forceRegenerate() - Method in interface nxopen.cam.Preferences
-
Returns the force regenerate
License requirements: None.
- forceSaveAll() - Method in interface nxopen.PartCollection
-
Saves all parts in a session.
- forceStrength() - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
Returns the force strength on blank holder.
- forceTorque() - Method in interface nxopen.mechatronics.ForceTorqueControlBuilder
-
Returns the value that indicates the value for force/torque for the control.
- ForceTorqueControl - Interface in nxopen.mechatronics
-
Represents the ForceTorque Control.
- ForceTorqueControlBuilder - Interface in nxopen.mechatronics
-
ForceTorque control builder for building a ForceTorque object.
- ForceTorqueControlBuilder.AxisJointType - Class in nxopen.mechatronics
-
The axis type for ForceTorque control.
- ForceTorqueControlCollection - Interface in nxopen.mechatronics
-
Represents the ForceTorque collection for ForceTorque constraint.
- forceTorqueControls() - Method in interface nxopen.mechatronics.PhysicsManager
-
- forceType() - Method in interface nxopen.cae.NodalForceReportBuilder
-
Returns the force type
License requirements: None.
- forceUpdate() - Method in interface nxopen.cae.AlternateFemRepresentationSource
-
Force update of the Alternate Fem Representation Source
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- forceValid(String) - Method in interface nxopen.routing.PortConnection
-
Force the connection to be valid regardless of the port alignment or the overridden value.
- ForceValueTypes - Class in nxopen.motion
-
Defines function value type
- FORE - Static variable in class nxopen.cae.Result.BeamEnd
-
Fore end
- FORE - Static variable in class nxopen.features.shipdesign.StandardPartItemBuilder.Direction
-
fore
- FORE_AND_AFT - Static variable in class nxopen.cae.responsesimulation.DDAMComponentData.LoadingType
-
- FORE_AND_AFT - Static variable in class nxopen.cae.responsesimulation.DDAMExcitation.LoadingType
-
- forEachScrapDiePlateThree() - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder
-
Returns the result whether use same clearance for each scrap in die plate three
License requirements: None.
- forEachScrapDiePlateTwo() - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder
-
Returns the for each scrap die plate two
License requirements: None.
- forearmLength() - Method in interface nxopen.features.vehicledesign.ManikinBuilder
-
Returns the forearm length.
- FOREGROUND - Static variable in class nxopen.cae.SimSolution.SolveMode
-
Run the solver in foreground
- foreground() - Method in interface nxopen.drawings.SectionViewStyle
-
Returns the status of foreground
License requirements: None.
- foreground() - Method in interface nxopen.drawings.ViewStyleSectionBuilder
-
Returns the foreground toggle on the SECTION tab of the View Style Dialog
License requirements: None.
- foreground() - Method in interface nxopen.preferences.SectionViewPreferences
-
Returns the status of foreground
License requirements: None.
- foregroundColor() - Method in interface nxopen.blockstyler.Node
-
Returns the text color of the node.
- foregroundColor - Variable in class nxopen.uf.UFDisp.DrawingDisplayData
-
- FOREIGN - Static variable in class nxopen.Edge.EdgeType
-
Foreign edge
- foreLimitPlane() - Method in interface nxopen.features.shipdesign.ShellExpansionBuilder
-
Returns the fore limit plane
License requirements: None.
- foreOffset() - Method in interface nxopen.cae.BeamSectionOffsetOptions
-
Returns the fore offsets
License requirements: None.
- forePlane() - Method in interface nxopen.features.shipdesign.ExpansionDrawingBuilder
-
Returns the fore plane
License requirements: None.
- foreshorteningSymbol() - Method in interface nxopen.annotations.AngularDimensionBuilder
-
Returns the foreshortening symbol builder
License requirements: None.
- foreshorteningSymbol() - Method in interface nxopen.annotations.ChamferDimensionBuilder
-
Returns the foreshortening symbol builder
License requirements: None.
- foreshorteningSymbol() - Method in interface nxopen.annotations.CurveLengthDimensionBuilder
-
Returns the foreshortening symbol builder
License requirements: None.
- foreshorteningSymbol() - Method in interface nxopen.annotations.DraftingCustomSymbolBuilder
-
Returns the foreshortening symbol builder
License requirements: None.
- foreshorteningSymbol() - Method in interface nxopen.annotations.DraftingDatumFeatureSymbolBuilder
-
Returns the foreshortening symbol builder
License requirements: None.
- foreshorteningSymbol() - Method in interface nxopen.annotations.DraftingDatumTargetBuilder
-
Returns the foreshortening symbol builder
License requirements: None.
- foreshorteningSymbol() - Method in interface nxopen.annotations.DraftingFeatureControlFrameBuilder
-
Returns the foreshortening symbol builder
License requirements: None.
- foreshorteningSymbol() - Method in interface nxopen.annotations.DraftingNoteBuilder
-
Returns the foreshortening symbol builder
License requirements: None.
- foreshorteningSymbol() - Method in interface nxopen.annotations.DraftingSurfaceFinishBuilder
-
Returns the foreshortening symbol builder
License requirements: None.
- foreshorteningSymbol() - Method in interface nxopen.annotations.IdSymbolBuilder
-
Returns the foreshortening symbol builder
License requirements: None.
- foreshorteningSymbol() - Method in interface nxopen.annotations.LinearDimensionBuilder
-
Returns the foreshortening symbol builder
License requirements: None.
- foreshorteningSymbol() - Method in interface nxopen.annotations.LineWeldBuilder
-
Returns the foreshortening symbol builder
License requirements: None.
- foreshorteningSymbol() - Method in interface nxopen.annotations.OrdinateDimensionBuilder
-
Returns the foreshortening symbol builder
License requirements: None.
- foreshorteningSymbol() - Method in interface nxopen.annotations.RadialDimensionBuilder
-
Returns the foreshortening symbol builder
License requirements: None.
- foreshorteningSymbol() - Method in interface nxopen.annotations.RapidDimensionBuilder
-
Returns the foreshortening symbol builder
License requirements: None.
- foreshorteningSymbol() - Method in interface nxopen.annotations.ThicknessDimensionBuilder
-
Returns the foreshortening symbol builder
License requirements: None.
- ForeshorteningSymbolBuilder - Interface in nxopen.annotations
-
- ForeshorteningSymbolBuilder.SymbolsData - Class in nxopen.annotations
-
- foreshorteningSymbolMethodType() - Method in interface nxopen.annotations.ForeshorteningSymbolSettingsBuilder
-
Returns the foreshortening symbol method
License requirements: None.
- foreshorteningSymbolSettings() - Method in interface nxopen.annotations.StyleBuilder
-
Returns the get builder for foreshortening symbol
License requirements: None.
- ForeshorteningSymbolSettingsBuilder - Interface in nxopen.annotations
-
- ForeshorteningSymbolSettingsBuilder.MethodType - Class in nxopen.annotations
-
Represents foreshortening symbol method type
- ForeshorteningSymbolSettingsBuilder.SymbolType - Class in nxopen.annotations
-
Represents foreshortening symbol type
- foreshorteningSymbolType() - Method in interface nxopen.annotations.ForeshorteningSymbolSettingsBuilder
-
Returns the foreshortening symbol type
License requirements: None.
- forgeo() - Method in interface nxopen.UFSession
-
- FORK - Static variable in class nxopen.annotations.Tail
-
Specifies fork tail
- form() - Method in interface nxopen.annotations.ChamferDimensionPreferences
-
Returns the form
License requirements: None.
- FORM - Static variable in class nxopen.cam.Tool.Types
-
Form tool
- form() - Method in interface nxopen.features.shipdesign.SteelDistributionBuilder
-
Returns the form
License requirements: None.
- form - Variable in class nxopen.uf.UFDrf.ChamferDimensionData
-
- form - Variable in class nxopen.uf.UFModl.SymbThreadData
-
- FORM_AND_RESTRIKE - Static variable in class nxopen.die.DieAssistantFlangeProfileType
-
Form and restrike flange steel.
- formabilityStrainType() - Method in interface nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder
-
Returns the formability strain type
License requirements: None.
- formAndPitch() - Method in interface nxopen.cam.HoleBossGeom
-
Returns the Form and Pitch types
License requirements: None.
- format() - Method in interface nxopen.annotations.TableCellStyleBuilder
-
- format() - Method in interface nxopen.cae.NumberFormat
-
Returns the format option
License requirements: None.
- format - Variable in class nxopen.cae.Post.PostviewGetFormatData
-
- format() - Method in interface nxopen.cae.PostAnnotationPreference
-
Returns the result navigator format
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- format() - Method in interface nxopen.cae.PostIdentifyPreference
-
Returns the result navigator format
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- format() - Method in interface nxopen.cae.PostLegendPreference
-
Returns the result navigator format
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- format() - Method in interface nxopen.cae.PostResultNavigatorPreference
-
Returns the result navigator format
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- format() - Method in interface nxopen.diagramming.FormattedStringBuilder
-
Returns the format.
- format() - Method in interface nxopen.gateway.ImageCaptureBuilder
-
Returns the format
License requirements: None.
- format() - Method in interface nxopen.ModelingViewHighQualityImage
-
Returns the format to use for the generation of the High Quality Image.
- format - Variable in class nxopen.uf.UFDisp.ShadeOptions
-
- format - Variable in class nxopen.uf.UFTabnot.CellPrefs
-
- FORMAT_COMMA - Static variable in class nxopen.uf.UFTabnot.Format
-
- FORMAT_CUSTOM - Static variable in class nxopen.uf.UFTabnot.Format
-
- FORMAT_DATE_DM - Static variable in class nxopen.uf.UFTabnot.Format
-
- FORMAT_DATE_DMY - Static variable in class nxopen.uf.UFTabnot.Format
-
- FORMAT_DATE_DMY_DOT - Static variable in class nxopen.uf.UFTabnot.Format
-
- FORMAT_DATE_MDY - Static variable in class nxopen.uf.UFTabnot.Format
-
- FORMAT_DATE_MY - Static variable in class nxopen.uf.UFTabnot.Format
-
- FORMAT_DATE_Y4MD - Static variable in class nxopen.uf.UFTabnot.Format
-
- FORMAT_DATE_YMD - Static variable in class nxopen.uf.UFTabnot.Format
-
- FORMAT_DEGREES - Static variable in class nxopen.uf.UFTabnot.Format
-
- FORMAT_DEGREES_DEGREE_UNITS - Static variable in class nxopen.uf.UFTabnot.Format
-
- FORMAT_DEGREES_RADIAN_UNITS - Static variable in class nxopen.uf.UFTabnot.Format
-
- FORMAT_FIXED - Static variable in class nxopen.uf.UFTabnot.Format
-
- FORMAT_FLOAT - Static variable in class nxopen.uf.UFTabnot.Format
-
- FORMAT_FRACTION_FULL_SIZE - Static variable in class nxopen.uf.UFTabnot.Format
-
- FORMAT_FRACTION_HALF_SIZE - Static variable in class nxopen.uf.UFTabnot.Format
-
- FORMAT_FRACTION_THREE_QUARTER_SIZE - Static variable in class nxopen.uf.UFTabnot.Format
-
- FORMAT_GENERAL - Static variable in class nxopen.uf.UFTabnot.Format
-
- FORMAT_HEX - Static variable in class nxopen.uf.UFTabnot.Format
-
- FORMAT_HIDDEN - Static variable in class nxopen.uf.UFTabnot.Format
-
- FORMAT_LOGIC - Static variable in class nxopen.uf.UFTabnot.Format
-
- FORMAT_MONETARY - Static variable in class nxopen.uf.UFTabnot.Format
-
- FORMAT_PERCENT - Static variable in class nxopen.uf.UFTabnot.Format
-
- FORMAT_QTVR_OBJECT_HIGH - Static variable in class nxopen.uf.UFDisp.ShadeFormat
-
- FORMAT_QTVR_OBJECT_LOW - Static variable in class nxopen.uf.UFDisp.ShadeFormat
-
- FORMAT_QTVR_PANORAMA - Static variable in class nxopen.uf.UFDisp.ShadeFormat
-
- FORMAT_RASTER - Static variable in class nxopen.uf.UFDisp.ShadeFormat
-
- FORMAT_TEXT - Static variable in class nxopen.uf.UFTabnot.Format
-
- FORMAT_TIME_HM - Static variable in class nxopen.uf.UFTabnot.Format
-
- FORMAT_TIME_HMS - Static variable in class nxopen.uf.UFTabnot.Format
-
- formatMesh() - Method in interface nxopen.cae.MappedMeshBuilder
-
Returns the format mesh option
License requirements: None.
- formatMesh - Variable in class nxopen.uf.UFSf.Ugs2dMeshParms
-
- formatOption() - Method in interface nxopen.cae.NodeElementInfoBuilder
-
Returns the format option
License requirements: None.
- formattedStringBuilder() - Method in interface nxopen.diagramming.AnnotationBuilder
-
Returns the formatted string of the text.
- FormattedStringBuilder - Interface in nxopen.diagramming
-
Represents a FormattedStringBuilder.
- formattedStringBuilder() - Method in interface nxopen.diagramming.tables.CellBuilder
-
Returns the formatted string of the text.
- FormattedStringBuilder.ReferencedAttributesData - Class in nxopen.diagramming
-
- formatType() - Method in interface nxopen.cae.SimLoadRecipeSource
-
- formatType() - Method in interface nxopen.routing.electrical.ElectricalFormat
-
Returns the type of
ElectricalFormat
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
Created in NX5.0.1
- formatType - Variable in class nxopen.uf.UFPlist.FieldFormat
-
- formblkLines - Variable in class nxopen.uf.UFSmd.AskFormblkLinesData
-
- formBlockCurves - Variable in class nxopen.uf.UFSmd.FpPrefs
-
- formBlockLines - Variable in class nxopen.uf.UFModl.GflangeOptionsData
-
- FormboardFrame - Interface in nxopen.routing
-
- FormboardFrame.ObjectData - Class in nxopen.routing
-
- FormboardFrameCGM - Interface in nxopen.routing
-
Represents a Formboard Frame CGM.
- FormboardFrameCollection - Interface in nxopen.routing
-
- FormboardFrameCollection.ImportPatternData - Class in nxopen.routing
-
- FormboardFramePattern - Interface in nxopen.routing
-
Represents a Formboard Frame Pattern.
- FormboardFrameRectangle - Interface in nxopen.routing
-
Represents a Formboard Frame Rectangle.
- formboardFrames() - Method in interface nxopen.routing.RouteManager
-
FormboardFrame collection .
- FormboardLayoutBuilder - Interface in nxopen.formboard
-
Class that performs the "layout" of Formboard geometry.
- FormboardLayoutBuilder.BranchAngle - Class in nxopen.formboard
-
Methods for determining which angles to apply at each branch of the Formboard.
- FormboardLayoutBuilder.BranchShape - Class in nxopen.formboard
-
Shape option for the branches.
- FormboardLayoutBuilder.MainRunType - Class in nxopen.formboard
-
Selection method for the set of segments that define the main
run of the formboard geometry.
- FormboardManager - Interface in nxopen.formboard
-
Contains information about flattened harness drawing and drafting data for
harness manufacturing drawings (Formboard Drawings).
- formboardManager() - Method in interface nxopen.routing.RouteManager
-
Collection for managing Formboard data.
- formboardObject() - Method in interface nxopen.formboard.UpdateDiscrepancy
-
Returns the object in the 2D formboard referenced by the discrepancy.
- formboardSynchronizationLengthTolerance() - Method in interface nxopen.preferences.RoutingElectrical
-
Returns the default segment length tolerance to use for Formboard Synchronization.
- formcustom - Variable in class nxopen.cam.HoleBossGeom.FormData
-
the User Defined Form
- FormData() - Constructor for class nxopen.cam.HoleBossGeom.FormData
-
- FORMED - Static variable in class nxopen.features.sheetmetal.BeadBuilder.EndTypeOptions
-
- FORMED - Static variable in class nxopen.features.sheetmetal.LouverBuilder.EndTypeOptions
-
- FORMED_STATE - Static variable in class nxopen.uf.UFModl.State
-
- formedBodyObject - Variable in class nxopen.features.FlatPattern.ObjectDataCsys
-
Corresponding datum CSYS on the formed body
- formedBodyObject - Variable in class nxopen.features.FlatPattern.ObjectDataFace
-
Corresponding bend face on the formed body
- formedBodyObject - Variable in class nxopen.features.FlatPattern.ObjectDataGeneral
-
Corresponding object on the formed body
- formedBodyObject - Variable in class nxopen.features.FlatSolid.ObjectDataCsys
-
corresponding object on formed body
- formEdges() - Method in interface nxopen.cam.FormToolBuilder
-
Returns the Form Edges Builder
License requirements: None.
- FormEdgesBuilder - Interface in nxopen.cam
-
Represents a FormEdges Builder .
- FormEdgesBuilder.Data - Class in nxopen.cam
-
- formFaces() - Method in interface nxopen.features.sheetmetal.AeroUnformBuilder
-
Returns the formed faces smart collector object
License requirements: aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- formFeatures(int, Tag[]) - Method in interface nxopen.uf.UFModlSmd
-
- FORMING - Static variable in class nxopen.tooling.QuickQuotationBuilder.ObjectTypes
-
sheet body is forming
- FORMING_DIE - Static variable in class nxopen.tooling.FormingInsertBuilder.DesignOptions
-
design the forming die
- FORMING_METHOD_INVALID_OPTION - Static variable in class nxopen.uf.UFSmd.FormingMethodE
-
- FORMING_METHOD_NUM_ITEMS - Static variable in class nxopen.uf.UFSmd.FormingMethodE
-
- FORMING_ONE_WAY_SURFACE_TO_SURFACE - Static variable in class nxopen.tooling.LsdynaGeometryPreparationBuilder.ContactType
-
The draw components contact type is forming one way surface to surface.
- FORMING_ONE_WAY_SURFACE_TO_SURFACE_SMOOTH - Static variable in class nxopen.tooling.LsdynaGeometryPreparationBuilder.ContactType
-
The draw components contact type is forming one way surface to surface smooth.
- FORMING_PUNCH - Static variable in class nxopen.tooling.FormingInsertBuilder.DesignOptions
-
design the forming punch
- FORMING_SURFACE_TO_SURFACE - Static variable in class nxopen.tooling.LsdynaGeometryPreparationBuilder.ContactType
-
The draw components contact type is forming surface to surface.
- FORMING_SURFACE_TO_SURFACE_SMOOTH - Static variable in class nxopen.tooling.LsdynaGeometryPreparationBuilder.ContactType
-
The draw components contact type is forming surface to surface smooth.
- FormingAttributesData() - Constructor for class nxopen.die.DrawDiePunchSectionBuilder.FormingAttributesData
-
- FormingAttributesData() - Constructor for class nxopen.die.SteelInsertSectionBuilder.FormingAttributesData
-
- formingBoundary() - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
Returns the forming boundary
License requirements: None.
- formingColor() - Method in interface nxopen.tooling.QuickQuotationBuilder
-
Returns the forming color.
- formingInsert() - Method in interface nxopen.tooling.ToolingManager
-
Returns the FormingInsertCollection instance belonging to this part .
- FormingInsertBuilder - Interface in nxopen.tooling
-
- FormingInsertBuilder.BlankPositions - Class in nxopen.tooling
-
Specifies the blank position.
- FormingInsertBuilder.BlankTypes - Class in nxopen.tooling
-
Specifies the blank type.
- FormingInsertBuilder.DesignOptions - Class in nxopen.tooling
-
Specifies the design type.
- FormingInsertBuilder.ParentTypes - Class in nxopen.tooling
-
Specifies the parent part type.
- FormingInsertCollection - Interface in nxopen.tooling
-
- formingMethod - Variable in class nxopen.uf.UFSmd.GenPrefs
-
- formName() - Method in interface nxopen.cam.DrillThreadMillToolBuilder
-
Returns the Form Name
License requirements: None.
- formOption() - Method in interface nxopen.geometricutilities.EndHoleData
-
Returns the form option
License requirements: None.
- FormOutput() - Constructor for class nxopen.uf.UFSmd.FormOutput
-
- FormOutput(String, String, String) - Constructor for class nxopen.uf.UFSmd.FormOutput
-
- FormSheetBuilder - Interface in nxopen.ame
-
- FormSheetBuilder.SizeOption - Class in nxopen.ame
-
Represents form sheet size option
- FormSheetBuilder.StandardMetricSize - Class in nxopen.ame
-
Represents standard metric sizes for form sheet
- FormSheetObject - Interface in nxopen.ame
-
JA class for the FormSheetObject
This is an abstract class, and cannot be instantiated.
- FormSheetSettingsBuilder - Interface in nxopen.ame
-
- formSheetSizeOption() - Method in interface nxopen.ame.FormSheetBuilder
-
Returns the size option type of type
FormSheetBuilder.SizeOption
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
Created in NX12.0.0
- formSheetStandardMetricSize() - Method in interface nxopen.ame.FormSheetBuilder
-
- formStandard() - Method in interface nxopen.cam.fbm.ThreadFeatureGeometry
-
Returns the form standard
License requirements: None.
- formTask(Feature) - Method in interface nxopen.die.DieCollection
-
Creates/Edits the form task feature builder.
- FormTaskBuilder - Interface in nxopen.die
-
Represents a Form Task feature builder.
- FormTaskBuilder.RegionBoundsData - Class in nxopen.die
-
- FormToolBuilder - Interface in nxopen.cam
-
- formula() - Method in interface nxopen.blockstyler.AngularDimension
-
Returns the Formula
License requirements: None.
- formula() - Method in interface nxopen.blockstyler.ExpressionBlock
-
Returns the Formula for the expression
License requirements: None.
- formula() - Method in interface nxopen.blockstyler.LinearDimension
-
Returns the Formula
License requirements: None.
- formula() - Method in interface nxopen.blockstyler.OnPathDimension
-
Returns the Formula
License requirements: None.
- formula() - Method in interface nxopen.blockstyler.RadiusDimension
-
Returns the Formula
License requirements: None.
- FORMULA - Static variable in class nxopen.cae.connections.DiameterType
-
Formula defined diameter
- formula() - Method in interface nxopen.cae.ResultProbeBuilder
-
Returns the formula
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- formula - Variable in class nxopen.mechatronics.ExpressionBlockBuilder.Slot
-
Formula
- formula - Variable in class nxopen.mechatronics.SignalAdapterBuilder.ParameterData
-
Formula Text
- formula - Variable in class nxopen.mechatronics.SignalAdapterBuilder.SignalData
-
Formula Text
- formula - Variable in class nxopen.RuleManager.DebugRule
-
formula of rule
- FORMULA - Static variable in class nxopen.SpreadsheetCellData.Types
-
- FORMULA - Static variable in class nxopen.validate.RequirementBuilder.DefinitionMethodOptions
-
- formula() - Method in interface nxopen.validate.RequirementBuilder
-
Returns the user defined formula.
- formula() - Method in interface nxopen.validate.RequirementCheck
-
Returns the formula of requirement check
License requirements: None.
- formulaComment() - Method in interface nxopen.mechatronics.AdapterFormulaBuilder
-
Returns the formula comment.
- formulaComment() - Method in interface nxopen.mechatronics.ExpressionBlockFormulaBuilder
-
Returns the formula comment.
- formulaName() - Method in interface nxopen.mechatronics.RuntimeFormulaBuilder
-
Returns the formula name
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- formulaString() - Method in interface nxopen.mechatronics.RuntimeFormulaBuilder
-
Returns the formula string
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- formulaSuffix - Variable in class nxopen.uf.UFTabnot.CellPrefs
-
- formulation() - Method in interface nxopen.cae.responsesimulation.RSEventAttributes
-
Returns the DDAM formulation type
License requirements: None.
- formulaType - Variable in class nxopen.mechatronics.CamProfileBuilder.Element
-
traversal segments type
- formulaValue() - Method in interface nxopen.SpreadsheetCellData
-
Returns the formula stored in the cell.
- FORSURF_GEOM - Static variable in class nxopen.uf.UFBrep.GeomType
-
- FORTH - Static variable in class nxopen.weld.WeldFacesetIndex
-
forth face set
- FORWARD - Static variable in class nxopen.cae.AfuDataConvertor.Fft
-
Forward FFT
- FORWARD - Static variable in class nxopen.cam.CutDirection.Types
-
Follow Boundary
- FORWARD - Static variable in class nxopen.cam.DmRadBuilder.RadTraverseDirType
-
Follow Boundary
- FORWARD - Static variable in class nxopen.cam.FollowPartMoveBuilder.MoveDirectionTypes
-
- FORWARD - Static variable in class nxopen.cam.TurnDirection.Types
-
TurnDirection: Forward
- FORWARD - Static variable in class nxopen.cam.TurnRoughFinishTestCut.DirectionTypes
-
Test Direction: Forward
- FORWARD - Static variable in class nxopen.features.shipdesign.ManufacturingAssemblyNavigatorBuilder.OrientationType
-
Forward Orientation
- FORWARD - Static variable in class nxopen.features.shipdesign.ShipCoordinatesBuilder.XDirectionType
-
- FORWARD - Static variable in class nxopen.Sense
-
- FORWARD_OFFSET - Static variable in class nxopen.features.vehicledesign.CloseRangeVisibilityBuilder.EyePointOffsetTypes
-
Forward offset
- FORWARD_PERPENDICULAR - Static variable in class nxopen.annotations.FrameBarElements
-
- forwardExtension() - Method in interface nxopen.mechanicalrouting.PathTransitionBuilder
-
Returns the forward extension length for this transition.
- forwardExtensionObject() - Method in interface nxopen.routing.IAxisPort
-
Returns the forward extension object of a port, i.e. an expression representing the minimum
length that a segment must remain straight coming out of a
Port
License requirements: routing_base ("Routing Basic")
Created in NX4.0.0
- forwardForce() - Method in interface nxopen.mechatronics.PositionControlBuilder
-
Returns the max force that speed control can apply.
- forwardForce() - Method in interface nxopen.mechatronics.SpeedControlBuilder
-
Returns the forward force that speed control can apply.
- forwardlength - Variable in class nxopen.routing.SplinePathBuilder.ExtensionDataForPointAtIndexData
-
Forward extension length.
- forwardPerpendicular() - Method in interface nxopen.annotations.BaseFrameBarBuilder
-
Returns the forward perpendicular
License requirements: None.
- forwardPerpendicular() - Method in interface nxopen.features.shipdesign.MainDimensionsBuilder
-
Returns the expression containing the position value of forward Perpendicular along the X axis.
- forwardPerpendicularLabelColor() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the label color
License requirements: None.
- forwardPerpendicularLabelFont() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the label font
License requirements: None.
- forwardPerpendicularLabelItalicized() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the label italicized
License requirements: None.
- forwardPerpendicularLabelWidth() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the label width
License requirements: None.
- forwardPerpendicularStyle() - Method in interface nxopen.annotations.FrameBarStyleBuilder
-
Returns the style forward perpendicular
License requirements: None.
- forwardPerpendicularTicColor() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the tic color
License requirements: None.
- forwardPerpendicularTicDisplay() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the forward perpendicular tic display type
License requirements: None.
- forwardPerpendicularTicFont() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the tic font
License requirements: None.
- forwardPerpendicularTicLength() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the tic length
License requirements: None.
- forwardPerpendicularTicWidth() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the tic width
License requirements: None.
- forwardStepTime() - Method in interface nxopen.mechatronics.PreferencesBuilder
-
Returns the Forward Step Time Expression
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- forwardStiffenerExtension() - Method in interface nxopen.features.shipdesign.ManufacturingPreparationBuilder
-
Returns the forward stiffener extension.
- forwardToEnd() - Method in interface nxopen.geometricutilities.PlayButtonsBuilder
-
TODO: fill in a description for this
License requirements: None.
- FORWARDWAVE - Static variable in class nxopen.cae.Post.AnimationStyle
-
- found - Variable in class nxopen.annotations.AssociativeText.ObjectAttributeData
-
the object attribute reference was found.
- found - Variable in class nxopen.annotations.AssociativeText.PartAttributeData
-
the part attribute reference was found
- found - Variable in class nxopen.Validation.LookupIntegerData
-
True integer found False not found in map
- found - Variable in class nxopen.Validation.LookupNumberData
-
True text found False not found in map
- found - Variable in class nxopen.Validation.LookupTextData
-
True text found False not found in map
- found - Variable in class nxopen.Validation.LookupTimeData
-
True time found False not found in map
- foundattribute - Variable in class nxopen.NXObject.NextUserAttributeData
-
- foundExisting - Variable in class nxopen.routing.ControlPointCollection.CreateControlPointData
-
- foundExistingRcp - Variable in class nxopen.uf.UFRoute.CreateRcpAtPortData
-
- foundExistingRcp - Variable in class nxopen.uf.UFRoute.CreateRcpByWcsOffData
-
- foundExistingRcp - Variable in class nxopen.uf.UFRoute.CreateRcpByWorkPosData
-
- foundExistingRcp - Variable in class nxopen.uf.UFRoute.CreateRcpOnRcpData
-
- foundParent - Variable in class nxopen.uf.UFModl.AskEntityParentsData
-
- foundpath - Variable in class nxopen.routing.ManualRouteBuilder.FindPathsFromMultiplePointsData
-
- FOUR - Static variable in class nxopen.annotations.AutomaticCenterlineBuilder.CenterlineThickness
-
Width Four
- FOUR - Static variable in class nxopen.annotations.CenterlineSettingsBuilder.CenterlineThickness
-
Width Four
- FOUR - Static variable in class nxopen.annotations.FractionDenominatorFormat
-
- FOUR - Static variable in class nxopen.annotations.IntersectionSymbolBuilder.Thickness
-
Width Four
- FOUR - Static variable in class nxopen.annotations.LineWidth
-
Width Four
- FOUR - Static variable in class nxopen.annotations.OffsetCenterPointBuilder.Thickness
-
Width Four
- FOUR - Static variable in class nxopen.annotations.TargetPointBuilder.Thickness
-
Width Four
- FOUR - Static variable in class nxopen.cae.CfdAutoRefinementConstraintBuilder.LocalSubdivisions
-
Four levels of subdivision
- FOUR - Static variable in class nxopen.cae.CfdContactPreventionConstraintBuilder.LocalSubdivisions
-
- FOUR - Static variable in class nxopen.cae.CfdLocalResolutionConstraintBuilder.LocalSubdivisions
-
- FOUR - Static variable in class nxopen.cae.FluidDomainBuilder.SubdivisionType
-
- FOUR - Static variable in class nxopen.cae.ModelDisplayBuilder.FreeEdgeWidth
-
- FOUR - Static variable in class nxopen.cae.ModelDisplayBuilder.RotationAxisWidth
-
- FOUR - Static variable in class nxopen.cae.ModelDisplayBuilder.StitchedEdgeWidth
-
- FOUR - Static variable in class nxopen.display.GridBuilder.LineWeightType
-
- FOUR - Static variable in class nxopen.DisplayableObject.ObjectWidth
-
- FOUR - Static variable in class nxopen.drawings.CustomViewSettingsBuilder.Width
-
Four
- FOUR - Static variable in class nxopen.drawings.DrawingCompareSettingsBuilder.WidthType
-
Deprecated.
Width Four
- FOUR - Static variable in class nxopen.features.shipdesign.SectionDrawingBuilder.ViewsPerSheetOptions
-
- FOUR - Static variable in class nxopen.features.vehicledesign.PedestrianProtectionBuilder.Width
-
- FOUR - Static variable in class nxopen.fields.DisplayPropertiesBuilder.LineWidthEnum
-
- FOUR - Static variable in class nxopen.geometricanalysis.FaceAnalysisDisplayBuilder.ColorsOptions
-
Display in 4 colors.
- FOUR - Static variable in class nxopen.geometricanalysis.ReflectionAnalysisBuilder.NumberOfLinesOptions
-
4 reflection line.
- FOUR - Static variable in class nxopen.PlaneTypes.AlternateType
-
Fourth alternate solution
- FOUR - Static variable in class nxopen.preferences.ViewVisualizationVisual.SmoothEdgeWidth
-
- FOUR - Static variable in class nxopen.preferences.Width
-
Width Four
- FOUR - Static variable in class nxopen.tooling.BendOperationBuilder.Prebend
-
four prebends
- FOUR - Static variable in class nxopen.tooling.DirectUnfoldBuilder.Bend
-
four bends
- FOUR - Static variable in class nxopen.tooling.LayoutBuilder.BalNumber
-
Four balance cavities
- FOUR - Static variable in class nxopen.tooling.PrebendBuilder.NumberBendsOption
-
four prebends
- FOUR - Static variable in class nxopen.tooling.ScrapDesignBuilder.TrimNumType
-
Specifies four steps of trimming
- FOUR - Static variable in class nxopen.ViewDependentDisplayManager.Width
-
- FOUR - Static variable in class nxopen.weld.JointmarkBuilder.ConnectedPanelTypes
-
- FOUR_AXIS - Static variable in class nxopen.cam.NcmWedmBuilder.NonTiltLeadInTypes
-
non-tilt lead in type 4-axis
- FOUR_AXIS_AROUND_ROTARY_AXIS - Static variable in class nxopen.cam.ToolAxisVariable.Types
-
4-Axis Around Rotary Axis
- FOUR_AXIS_NORMAL_TO_DRIVE - Static variable in class nxopen.cam.ToolAxisVariable.Types
-
4-Axis Normal to Drive
- FOUR_AXIS_NORMAL_TO_PART - Static variable in class nxopen.cam.ToolAxisVariable.Types
-
4-Axis Normal to Part
- FOUR_AXIS_RELATIVE_TO_DRIVE - Static variable in class nxopen.cam.ToolAxisVariable.Types
-
4-Axis Relative to Drive
- FOUR_AXIS_RELATIVE_TO_PART - Static variable in class nxopen.cam.ToolAxisVariable.Types
-
4-Axis Relative to Part
- FOUR_LINK - Static variable in class nxopen.motion.LinkCouplerBuilder.TypeChoices
-
4-Link
- FOUR_LINK_SUSPENSION - Static variable in class nxopen.motion.TextBasedElementBuilder.TypeChoices
-
- FOUR_ONINE_SIX - Static variable in class nxopen.display.DecalBuilder.ImageSize
-
resize image to 4096x 4096
- FOUR_POINT_SLOPE - Static variable in class nxopen.features.SectionSurfaceBuilder.Types
-
Deprecated.
four point slope
- FOUR_POINT_SLOPE - Static variable in class nxopen.features.SectionSurfaceBuilderEx.ConicType
-
Four Point Slope mode
- FOUR_POINTS_ONE_SLOPE - Static variable in class nxopen.features.GeneralConicBuilder.Types
-
Four points, one slope, no anchor, no rho value
- FOUR_SIDED - Static variable in class nxopen.features.RapidSurfaceBuilder.LoopTypes
-
subdivide four sided loops
- FOUR_WAY - Static variable in class nxopen.mechatronics.HydraulicValveBuilder.OutputValveType
-
4-way valve
- FOUR_WAY - Static variable in class nxopen.mechatronics.PneumaticValveBuilder.OutputValveType
-
4-way valve
- FourPointSurfaceBuilder - Interface in nxopen
-
- FOURTEENTH - Static variable in class nxopen.weld.WeldGroupIdColor
-
Fourteenth Group Id Color Index
- FOURTH - Static variable in class nxopen.features.vehicledesign.PedestrianProtectionBuilder.Wad
-
Fourth wrap around distance line
- FOURTH - Static variable in class nxopen.tooling.AutoDimensionBuilder.TextFontType
-
- FOURTH - Static variable in class nxopen.tooling.HoleDatumSymbolBuilder.SymbolType
-
- FOURTH - Static variable in class nxopen.weld.WeldGroupIdColor
-
Fourth Group Id Color Index
- fourthMargin() - Method in interface nxopen.tooling.AutoDimensionBuilder
-
Returns the fourth margin tag
License requirements: None.
- fourthObject() - Method in interface nxopen.features.shipdesign.StandardPartItemBuilder
-
Returns the fourth selected object.
- FOV - Static variable in class nxopen.display.CameraBuilder.LensAngle
-
Field of View
- fpAlgorithm - Variable in class nxopen.uf.UFSmd.FpPrefs
-
- fpOrientation - Variable in class nxopen.uf.UFSmd.FpPrefs
-
- FpPrefs() - Constructor for class nxopen.uf.UFSmd.FpPrefs
-
- FpPrefs(double, double, double, int, int, int, int, boolean, boolean, boolean, boolean, boolean, boolean, boolean, String, int) - Constructor for class nxopen.uf.UFSmd.FpPrefs
-
- FRACTION_DENOM1 - Static variable in class nxopen.uf.UFDrf.FractionDenominator
-
- FRACTION_DENOM16 - Static variable in class nxopen.uf.UFDrf.FractionDenominator
-
- FRACTION_DENOM2 - Static variable in class nxopen.uf.UFDrf.FractionDenominator
-
- FRACTION_DENOM32 - Static variable in class nxopen.uf.UFDrf.FractionDenominator
-
- FRACTION_DENOM4 - Static variable in class nxopen.uf.UFDrf.FractionDenominator
-
- FRACTION_DENOM64 - Static variable in class nxopen.uf.UFDrf.FractionDenominator
-
- FRACTION_DENOM8 - Static variable in class nxopen.uf.UFDrf.FractionDenominator
-
- FRACTION_FULL_SIZE - Static variable in class nxopen.annotations.TableCellStyleBuilder.CellFormatTypes
-
Fraction full size
- FRACTION_FULL_SIZE - Static variable in class nxopen.annotations.TableCellStyleBuilder.FormatType
-
Deprecated.
- FRACTION_HALF_SIZE - Static variable in class nxopen.annotations.TableCellStyleBuilder.CellFormatTypes
-
Fraction half size
- FRACTION_HALF_SIZE - Static variable in class nxopen.annotations.TableCellStyleBuilder.FormatType
-
Deprecated.
- FRACTION_THREE_QUARTER_SIZE - Static variable in class nxopen.annotations.TableCellStyleBuilder.CellFormatTypes
-
Fraction three quarter size
- FRACTION_THREE_QUARTER_SIZE - Static variable in class nxopen.annotations.TableCellStyleBuilder.FormatType
-
Deprecated.
- FRACTION_VOLUME - Static variable in class nxopen.cae.Result.Quantity
-
- FRACTIONAL - Static variable in class nxopen.cae.ModelUpdateOptimOptionsBuilder.SteepestDescMethodChoice
-
Fractional mode
- FRACTIONAL_DEGREES - Static variable in class nxopen.annotations.AngularDimensionFormat
-
Specifies fractional degrees format
- FRACTIONAL_DEGREES - Static variable in class nxopen.preferences.AngleFormat
-
Fractional degrees format, e.g. 30.55 degrees
- FRACTIONAL_DEGREES - Static variable in class nxopen.uf.UFDrf.AngularUnits
-
- fractionalDisplay() - Method in interface nxopen.annotations.UnitsFormatPreferences
-
Returns the fractional display for angular dimension
License requirements: None.
- fractionalDisplay() - Method in interface nxopen.annotations.UnitsStyleBuilder
-
Returns the fractional display for angular dimension
License requirements: None.
- FractionDenominatorFormat - Class in nxopen.annotations
-
Specifies the fraction denominator format
- FRAGMENT - Static variable in class nxopen.ame.OrderAspectsBuilder.OrderType
-
- FragmentAttributeHolder - Interface in nxopen.ame
-
Fragment Object Atributes Holder
This does not need a creator.
- fragmentAttributeHolder() - Method in interface nxopen.ame.FragmentBuilder
-
Returns the attribute holder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- FragmentBuilder - Interface in nxopen.ame
-
- fragmentDescription() - Method in interface nxopen.ame.FragmentBuilder
-
Returns the fragment description
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- fragmentLocation() - Method in interface nxopen.ame.InstantiateTemplateBulkBuilder
-
Returns the co-ordinate of fragment placement location
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- fragmentName() - Method in interface nxopen.ame.FragmentBuilder
-
Returns the fragment name
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- FragmentObject - Interface in nxopen.ame
-
Represents a Fragment Object
This object does not need a creator.
- FRAME - Static variable in class nxopen.features.shipdesign.MaterialEstimationBuilder.SelectionMethods
-
Selection by Frame.
- FRAME - Static variable in class nxopen.features.shipdesign.SelectPartBuilder.Types
-
- FRAME - Static variable in class nxopen.features.shipdesign.TransitionBuilder.TransitionTypes
-
- FRAME - Static variable in class nxopen.features.shipdesign.WeightAndCGBuilder.SelectionMethods
-
Selection by Frame.
- FRAME - Static variable in class nxopen.RuleManager.RuleType
-
- FRAME - Static variable in class nxopen.uf.UFKf.Type
-
- frame - Variable in class nxopen.uf.UFMotion.VectorForceTorque
-
- FRAME_LOWER_LEFT - Static variable in class nxopen.uf.UFDrf.FrameCorner
-
- FRAME_LOWER_RIGHT - Static variable in class nxopen.uf.UFDrf.FrameCorner
-
- FRAME_NONE - Static variable in class nxopen.uf.UFDrf.FrameCorner
-
- FRAME_UPPER_LEFT - Static variable in class nxopen.uf.UFDrf.FrameCorner
-
- FRAME_UPPER_RIGHT - Static variable in class nxopen.uf.UFDrf.FrameCorner
-
- FrameBar - Interface in nxopen.annotations
-
Represents a frame bar class
To create or edit an instance of this class, use
FrameBarBuilder
Created in NX8.0.0
- FrameBarBuilder - Interface in nxopen.annotations
-
- FrameBarCollection - Interface in nxopen.annotations
-
Represents a collection of
FrameBar
objects
To obtain an instance of this class, refer to
AnnotationManager
Created in NX8.0.0
- FrameBarElements - Class in nxopen.annotations
-
Specifies the frame bar elements
- FrameBarElementStyleBuilder - Interface in nxopen.annotations
-
- FrameBarElementStyleBuilder.LabelTextOrientation - Class in nxopen.annotations
-
the Label text orientation
- framebarGeneral() - Method in interface nxopen.drafting.PreferencesBuilder
-
Returns the framebar general builder
License requirements: None.
- framebarHorizontal() - Method in interface nxopen.drawings.ViewStyleGeneralBuilder
-
Returns the horizontal framebar toggle on the GENERAL tab of the View Style Dialog
License requirements: None.
- framebarHorizontal() - Method in interface nxopen.preferences.GeneralViewPreferences
-
Returns the status of horizontal framebar.
- FrameBarOut - Interface in nxopen.features.shipdesign
-
Represents a FrameBarOut
To create or edit an instance of this class, use
FrameBarOutBuilder
Created in NX5.0.0
- FrameBarOutBuilder - Interface in nxopen.features.shipdesign
-
- frameBarPrecision() - Method in interface nxopen.preferences.PartDrafting
-
Returns the frame bar precision.
- FrameBarPreferences - Interface in nxopen.annotations
-
Represents frame bar preferences.
- frameBars() - Method in interface nxopen.annotations.AnnotationManager
-
Frame bar collection .
- frameBarStyle() - Method in interface nxopen.annotations.StyleBuilder
-
Returns the frame bar builder
License requirements: None.
- FrameBarStyleBuilder - Interface in nxopen.annotations
-
- frameBarTicDirection() - Method in interface nxopen.preferences.PartDrafting
-
Returns the frame bar tic direction.
- framebarVertical() - Method in interface nxopen.drawings.ViewStyleGeneralBuilder
-
Returns the vertical framebar toggle on the GENERAL tab of the View Style Dialog
License requirements: None.
- framebarVertical() - Method in interface nxopen.preferences.GeneralViewPreferences
-
Returns the status of vertical framebar.
- frameList() - Method in interface nxopen.mechatronics.PathConstraintJointBuilder
-
Returns the list containing the defined frames.
- frameName() - Method in interface nxopen.features.shipdesign.BulkHeadListItemBuilder
-
Returns the reference frame name.
- frameOffset() - Method in interface nxopen.features.shipdesign.BulkHeadListItemBuilder
-
Returns the expression containing bulkhead frame offset value.
- frameOnlyToggle() - Method in interface nxopen.geometricutilities.PatternDefinition
-
Returns the frameOnlyToggle, a logical flag to indicate if the we need only instances on the boundary.
- frameOnPath() - Method in interface nxopen.features.TextBuilder
-
Returns the frame on path
License requirements: None.
- FrameOnPathBuilder - Interface in nxopen.geometricutilities
-
Frame on path builder .
- FrameOnPathBuilder.AnchorLocationType - Class in nxopen.geometricutilities
-
Anchor location types
- framePlane() - Method in interface nxopen.features.shipdesign.InsertSheetBodyBuilder
-
Returns the frame plane
License requirements: None.
- framePlane() - Method in interface nxopen.features.shipdesign.ReferenceLineBuilder
-
Returns the grid fame plane to intersect with the face to produce the reference line.
- frameSheet() - Method in interface nxopen.features.shipdesign.InsertSheetBodyBuilder
-
Returns the frame sheet
License requirements: None.
- frameSpacing() - Method in interface nxopen.features.shipdesign.TransFrameListItemBuilder
-
Returns the expression containing the frame spacing value.
- framesPerPulse - Variable in class nxopen.cae.Post.AnimationStreamline
-
more than 2.0
- framesPerSecond() - Method in interface nxopen.MovieSettingsBuilder
-
Returns the frames per second for the movie.
- frameStyle() - Method in interface nxopen.annotations.FeatureControlFrameBuilder
-
Returns the frame style
License requirements: None.
- frameStyleType() - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
Returns the frame style enum
License requirements: None.
- frameType() - Method in interface nxopen.motion.PackagingInterferenceBuilder
-
- frameType() - Method in interface nxopen.motion.PackagingTraceBuilder
-
- frdim(Tag, Tag, int, int, double, double, String, int, String[], double[]) - Method in interface nxopen.uf.UFDrf
-
- FrdimData() - Constructor for class nxopen.uf.UFDrf.FrdimData
-
- frecAtTimeStamp() - Method in interface nxopen.features.CompositeCurveBuilder
-
Returns the frec at time stamp
License requirements: None.
- frecAtTimeStamp() - Method in interface nxopen.features.ExtractFaceBuilder
-
Returns the option specifying if the results from this builder should be associated
License requirements: None.
- frecAtTimeStamp() - Method in interface nxopen.features.MirrorBodyBuilder
-
Returns the frec at time stamp
License requirements: None.
- frecAtTimeStamp() - Method in interface nxopen.features.WavePointBuilder
-
Returns the frec at time stamp
License requirements: None.
- frecs - Variable in class nxopen.uf.UFModl.UdfsDefData
-
- frecs - Variable in class nxopen.weld.WeldPointBuilder.FaceSetData
-
the face set wave linked frecs
- FREE - Static variable in class nxopen.assemblies.DegreesOfFreedomStatus
-
The point or direction is under defined.
- FREE - Static variable in class nxopen.cae.connections.DofType
-
The DOF is not constrained
- FREE - Static variable in class nxopen.cae.DependentMeshBuilder.MeshType
-
Free mesh
- FREE - Static variable in class nxopen.cae.DurSpecialistBlockLoadEventBuilder.PatternType
-
between two values
- FREE - Static variable in class nxopen.cae.optimization.TBSCheckDOF.CheckDofOption
-
Displacement is allowed
- FREE - Static variable in class nxopen.cae.Type
-
compute free element edges
- FREE - Static variable in class nxopen.facet.BestFitAlignBuilder.ConstraintOptions
-
No constraint
- FREE - Static variable in class nxopen.features.MatchEdgeBuilder.EdgeConstraintType
-
Free
- FREE - Static variable in class nxopen.features.StudioXformBuilderEx.PoleEditType
-
Edited without maintaining constraint
- FREE - Static variable in class nxopen.geometricutilities.Continuity.ContinuityTypes
-
Free continuity
- FREE - Static variable in class nxopen.mfg.am.Nester3D.Constraint
-
- free() - Method in interface nxopen.uf.UFCutLevels
-
- free(UFVariant) - Method in interface nxopen.uf.UFEval
-
- free2DOption() - Method in interface nxopen.features.FreeTransformerBuilder
-
Returns the option to turn on or off the Free 2D plane used in the transformation or morphing calculations
License requirements: None.
- free2DPlane() - Method in interface nxopen.features.FreeTransformerBuilder
-
Returns the Free 2D plane to be used in the transformation or morphing calculations
License requirements: None.
- FREE_AND_NONMANIFOLD - Static variable in class nxopen.cae.Type
-
compute free and nonmanifold element edges
- FREE_CLAMPED - Static variable in class nxopen.cae.aerostructures.author.ABB.UnloadedEdgeSupportType
-
Free-Clamped
- FREE_COINCIDENT - Static variable in class nxopen.cae.MMCCreateBuilder.MeshMatingType
-
free coincident
- FREE_CURVES - Static variable in class nxopen.features.SmoothCurveStringBuilder.Types
-
- FREE_EDGES - Static variable in class nxopen.cae.Result.Quantity
-
- FREE_FACEES - Static variable in class nxopen.cae.Post.Target
-
- FREE_FORM - Static variable in class nxopen.cam.SurfaceContourBuilder.DriveMethodTypes
-
Free Form
- FREE_FORM_BUILDUP - Static variable in class nxopen.cam.SurfaceContourBuilder.DriveMethodTypes
-
Free Form Buildup
- FREE_LIMITS - Static variable in class nxopen.cae.xyplot.LimitsType
-
Type to use source data limits as axis limits
- FREE_NORMAL - Static variable in class nxopen.assemblies.DegreesOfFreedomStatus
-
The direction represents a normal to two translational degrees of freedom.
- FREE_SIMPLY_SUPPORTED - Static variable in class nxopen.cae.aerostructures.author.ABB.UnloadedEdgeSupportType
-
Free-Simply Supported
- FREE_SOLID - Static variable in class nxopen.cae.ElementTypeBuilder.ElementType
-
Free mesh solid
- FREE_STATE - Static variable in class nxopen.uf.UFGdt.ModifierTypes
-
- freeAngleExpression() - Method in interface nxopen.motion.SpringBuilder
-
- freeAvailableProperties() - Method in interface nxopen.features.shipdesign.FilterBuilder
-
- FreeBodyResultsBuilder - Interface in nxopen.cae
-
- FreeBodyResultsBuilder.LocationMethod - Class in nxopen.cae
-
Location definition method
- FreeBodyResultsBuilder.OutputUnits - Class in nxopen.cae
-
User Specified output units
- FreeBodyResultsBuilder.VectorDisplay - Class in nxopen.cae
-
Vector display option
- freeCompareData3(UFModl.ComparePartMapData3) - Method in interface nxopen.uf.UFModl
-
- freeCompData(UFVariant) - Method in interface nxopen.uf.UFDrf
-
- FREED - Static variable in class nxopen.tooling.MWPartingManagerBuilder.DataStatus
-
Data already freed.
- freeDimensionPreferences1(UFDrf.DimensionPreferences1) - Method in interface nxopen.uf.UFDrf
-
- freeEdgeDisplayStyle() - Method in interface nxopen.cae.modelcheck.ElementEdgeCheckBuilder
-
Returns the display style for free edges detected
License requirements: None.
- FreeEdgeDistanceCheck - Interface in nxopen.cae.qualityaudit
-
This action checks if there are connections that are too close to the edge based on a configurable tolerance.
- FreeEdgeDistanceResult - Interface in nxopen.cae.qualityaudit
-
The Quality Audit FreeEdgeDistanceResult contains information about problematic places where distance between connection points and free edges is less than a given value.
- freeEdgeProjection() - Method in interface nxopen.features.ReplaceFaceBuilder
-
Returns the free edge projection options, which defines a direction to project laminar boundaries of the original face onto the replacement face.
- freeedges - Variable in class nxopen.cae.modelcheck.ElementEdgeCheckBuilder.DoCheckData
-
free element edges
- freeedges - Variable in class nxopen.cae.modelcheck.ElementEdgeCheckBuilder.ExecuteCheckData
-
free element edges
- freeFaceIndicator() - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder
-
Returns the free face indicator.
- freeFaceIndicator() - Method in interface nxopen.cae.DurabilityResultsReportBuilder
-
Returns the free face indicator.
- freeFormConstructionResult() - Method in interface nxopen.preferences.SessionModeling
-
Returns the free form construction result.
- freeformCurveCollection() - Method in interface nxopen.features.FeatureCollection
-
Returns the FreeformCurveCollection instance belonging to this part .
- FreeformCurveCollection - Interface in nxopen.features
-
Collection of freeform curve based features.
- freeformSurfaceCollection() - Method in interface nxopen.features.FeatureCollection
-
Returns the FreeformSurfaceCollection instance belonging to this part .
- FreeformSurfaceCollection - Interface in nxopen.features
-
Collection of freeform surface based features.
- Freehand - Interface in nxopen.markup
-
- freeLength() - Method in interface nxopen.motion.BeamForceBuilder
-
Returns the free length
License requirements: mechanisms ("MECHANISMS")
.
- freeLengthExpression() - Method in interface nxopen.motion.SpringBuilder
-
- freeLinkedFeatureInfo(UFWave.LinkedFeatureInfo) - Method in interface nxopen.uf.UFWave
-
- freeOcfApplicationData() - Method in interface nxopen.tooling.ReusePositioningObjectBuilder
-
Free OCF applicaion data
License requirements: None.
- freePrev16Aligns(int, UFAssem.Prev16Align) - Method in interface nxopen.uf.UFAssem
-
- freeProductAttributeData2(UFPd.ProductAttribute2) - Method in interface nxopen.uf.UFPd
-
- freeState() - Method in interface nxopen.annotations.DatumReferenceBuilder
-
Returns the datum reference free state
License requirements: None.
- freeState() - Method in interface nxopen.annotations.FeatureControlFrameDataBuilder
-
Returns the free state toggle
License requirements: None.
- freeStateType() - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
Returns the free state enum
License requirements: None.
- freeSymbThreadData(UFModl.SymbThreadData) - Method in interface nxopen.uf.UFModeling
-
- freeTempFacetData() - Method in interface nxopen.uf.UFDisp
-
- FreeTransformer - Interface in nxopen.features
-
Represents a free transformer feature
To create or edit an instance of this class, use
FreeTransformerBuilder
Created in NX10.0.0
- FreeTransformerBuilder - Interface in nxopen.features
-
- freeValidationOptions(UFClone.ValidationOpts) - Method in interface nxopen.uf.UFClone
-
- freeze(int, Tag[]) - Method in interface nxopen.uf.UFWave
-
- FreezeGeometryBuilder - Interface in nxopen.cae
-
- FreezeGeometryRecipe - Interface in nxopen.cae
-
Represents FreezeGeometryRecipe
To create or edit an instance of this class, use
FreezeGeometryBuilder
Created in NX10.0.0
- freezePartNavigator() - Method in interface nxopen.Session
-
Freeze Part Navigator updates.
- freezePersistently(int, Tag[]) - Method in interface nxopen.uf.UFWave
-
- FRENET - Static variable in class nxopen.DatumConstraint.Type
-
- FRENET - Static variable in class nxopen.features.DatumAxisBuilder.ConstraintType
-
Frenet constraint
- FRENET - Static variable in class nxopen.features.DatumPlaneBuilder.ConstraintType
-
Frenet constraint
- FRENET - Static variable in class nxopen.PlaneTypes.MethodType
-
Frenet method
- frenetSubtype() - Method in interface nxopen.IPlane
-
Returns the subtype of on curve type of plane fron NX6 onwards.
- FREQ_MAC - Static variable in class nxopen.cae.CorrelModePairingBuilder.Auto
-
by frequency AND mac
- FREQRESPONSE - Static variable in class nxopen.cae.Result.SolutionType
-
Frequency Response
- frequencies() - Method in interface nxopen.cae.ModelUpdateOverallWeightsBuilder
-
Returns the overall weights of frequency targets
License requirements: None.
- FREQUENCIES - Static variable in class nxopen.cae.ModelUpdateSolution.TargetType
-
Export all the frequency targets to the csv file
- FREQUENCY - Static variable in class nxopen.cae.BaseIteration.IterationValueType
-
Value represents a Frequency
- FREQUENCY - Static variable in class nxopen.cae.CorrelModePairingBuilder.Auto
-
by frequency
- FREQUENCY - Static variable in class nxopen.cae.optimization.Response
-
- frequency - Variable in class nxopen.cae.PostScenarioModeDescription
-
- FREQUENCY - Static variable in class nxopen.cae.responsesimulation.RSEvent.Type
-
- FREQUENCY - Static variable in class nxopen.cae.Result.LoadcaseValueType
-
Value type - Frequency
- FREQUENCY - Static variable in class nxopen.cae.ResultProbeBuilder.IterationType
-
- FREQUENCY - Static variable in class nxopen.cae.SimLoadSet.Type
-
Frequency Excitation Load Set.
- FREQUENCY - Static variable in class nxopen.cae.XyFunctionMeasure
-
Frequency unit
- frequency(double) - Method in interface nxopen.EngineeringFunction
-
Calculate the frequency from period.
- frequency() - Method in interface nxopen.motion.NormalModeProperty
-
Returns the natural frequency of the normal mode
License requirements: mechanisms ("MECHANISMS")
.
- frequency - Variable in class nxopen.uf.UFMotion.JointMotionInput
-
- FREQUENCY_GHZ - Static variable in class nxopen.cae.XyFunctionUnit
-
Frequency Unit: GHz
- FREQUENCY_HZ - Static variable in class nxopen.cae.XyFunctionUnit
-
Frequency unit: Hz
- FREQUENCY_KHZ - Static variable in class nxopen.cae.XyFunctionUnit
-
Frequency Unit: kHz
- FREQUENCY_MHZ - Static variable in class nxopen.cae.XyFunctionUnit
-
Frequency Unit: MHz
- FREQUENCY_RESPONSE - Static variable in class nxopen.cae.BaseIteration.IterationType
-
Frequency Response Analysis Iteration
- FREQUENCY_RESPONSE_ACCELERATION_X - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
-
Acceleration in X-direction for frequency response
- FREQUENCY_RESPONSE_ACCELERATION_Y - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
-
Acceleration in Y-direction for frequency response
- FREQUENCY_RESPONSE_ACCELERATION_Z - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
-
Acceleration in Z-direction for frequency response
- FREQUENCY_RESPONSE_COMPLIANCE - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
-
Dynamic compliance for frequency response
- FREQUENCY_RESPONSE_DB_PRESSURE - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
-
Sound pressure level (dB)
- FREQUENCY_RESPONSE_DBA_PRESSURE - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
-
Sound pressure level (dBA)
- FREQUENCY_RESPONSE_DISPLACEMENT_ABSOLUTE - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
-
Absolute amplitude for frequency response
- FREQUENCY_RESPONSE_DISPLACEMENT_XABSOLUTE - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
-
Amplitude in X-direction for frequency response
- FREQUENCY_RESPONSE_DISPLACEMENT_YABSOLUTE - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
-
Amplitude in Y-direction for frequency respons
- FREQUENCY_RESPONSE_DISPLACEMENT_ZABSOLUTE - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
-
Amplitude in Z-direction for frequency respons
- FREQUENCY_RESPONSE_FUNCTION - Static variable in class nxopen.cae.XyFunctionDataType
-
Function is Frequency Response Function
- FREQUENCY_RESPONSE_FUNCTION - Static variable in class nxopen.cae.XyFunctionGeneralType
-
Function is Frequency Response Function
- FREQUENCY_RESPONSE_FUNCTION - Static variable in class nxopen.cae.XyFunctionResponseType
-
Function is Frequency Response Function
- FREQUENCY_RESPONSE_NVH_SHELL - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
-
Surface normal velocity equivalent.
- FREQUENCY_RESPONSE_NVH_SOLID - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
-
Surface normal velocity equivalent.
- FREQUENCY_RESPONSE_PHASE_XABSOLUTE - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
-
Phase in X-direction for frequency response
- FREQUENCY_RESPONSE_PHASE_YABSOLUTE - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
-
Phase in Y-direction for frequency response
- FREQUENCY_RESPONSE_PHASE_ZABSOLUTE - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
-
Phase in Z-direction for frequency response
- FREQUENCY_RESPONSE_PRESSURE - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
-
Instantaneous sound pressure
- FREQUENCY_RESPONSE_RMS_PRESSURE - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
-
Effective sound pressure
- FREQUENCY_RESPONSE_VELOCITY_XABSOLUTE - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
-
Velocity in X-direction for frequecy response
- FREQUENCY_RESPONSE_VELOCITY_YABSOLUTE - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
-
Velocity in Y-direction for frequecy response
- FREQUENCY_RESPONSE_VELOCITY_ZABSOLUTE - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
-
Velocity in Z-direction for frequecy response
- FREQUENCY_SPECTRA - Static variable in class nxopen.cae.SimLoadRecipeTypes.DataTypes
-
Frequency Spectra
- FrequencyBandSummationBandType - Class in nxopen.cae.xyplot
-
Represents the frequency band summation band type
- frequencyBandSummationBandType() - Method in interface nxopen.cae.xyplot.GraphOptionsStyle2D
-
Returns a value specifies the frequency band summation band type
License requirements: None.
- FrequencyDefinition - Interface in nxopen.cae.responsesimulation
-
Represents the frequency setting to perform FRF evaluation .
- FrequencyDefinition.Definition - Class in nxopen.cae.responsesimulation
-
Specifies the method to define frequency
- FrequencyDefinition.InterpolationMethod - Class in nxopen.cae.responsesimulation
-
Specifies the method for interpolation
- frequencyExpression() - Method in interface nxopen.motion.DriverOperation
-
Returns the frequency expression
License requirements: None.
- frequencyTolerance() - Method in interface nxopen.cae.CorrelModePairingBuilder
-
Returns the frequency-pairing tolerance
License requirements: None.
- frfDampingSource() - Method in interface nxopen.cae.CorrelSolutionBuilder
-
Returns the option controlling which damping to consider when synthesizing FRF data from analysis results
License requirements: None.
- FrfEvaluationSetting - Interface in nxopen.cae.responsesimulation
-
Represents the parameters setting for FRF results evaluation
To create or edit an instance of this class, use
FrfEvaluationSettingBuilder
Created in NX5.0.0
- FrfEvaluationSettingBuilder - Interface in nxopen.cae.responsesimulation
-
- FrfSet - Interface in nxopen.cae
-
This is the class representing a FRF set.
- FrfSet.Measure - Class in nxopen.cae
-
Measure types
- FrfSet.NodeComponent - Class in nxopen.cae
-
Node component types
- FrfSetBuilder - Interface in nxopen.cae
-
- FrfSetCollection - Interface in nxopen.cae
-
This class is a collection of
FrfSet
.
- frfSets() - Method in interface nxopen.cae.CaePart
-
- frfUnit - Variable in class nxopen.cae.FunctionBuilder.UnitsData
-
- FRICT_CURVE - Static variable in class nxopen.motion.TirePropertyAdvancedParameters.SurfType
-
- FRICT_SURFACE - Static variable in class nxopen.motion.TirePropertyAdvancedParameters.SurfType
-
- friction() - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder
-
Returns the friction.
- frictionArm() - Method in interface nxopen.motion.JointFrictionLms
-
Returns the friction arm
License requirements: None.
- frictionArmExpression() - Method in interface nxopen.motion.JointFrictionAdams
-
Returns the friction arm expression
License requirements: None.
- frictionArmExpression() - Method in interface nxopen.motion.JointFrictionRecurDyn
-
Returns the friction arm expression
License requirements: None.
- frictionCoefficient() - Method in interface nxopen.motion.TirePropertyBasicParameters
-
Returns the friction coefficient between the tire and road.
- frictionCoefficient() - Method in interface nxopen.motion.TirePropertyNonInertialBuilder
-
Returns the friction coefficient between the tire and road.
- frictionCoefficientCurve() - Method in interface nxopen.motion.AnalyticalContactPropertyBuilder
-
Returns the friction coefficient function
License requirements: None.
- frictionCoefficientOption() - Method in interface nxopen.motion.AnalyticalContactPropertyBuilder
-
Returns the friction coefficient option
License requirements: mechanisms ("MECHANISMS")
.
- frictionCoefficientProfile() - Method in interface nxopen.motion.AnalyticalContactPropertyBuilder
-
Returns the friction coefficient Profile.
- frictionCoefficientValue() - Method in interface nxopen.motion.AnalyticalContactPropertyBuilder
-
Returns the friction coefficient value
License requirements: mechanisms ("MECHANISMS")
.
- frictionForce(double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the friction force.
- frictionFunction() - Method in interface nxopen.motion.TirePropertyAdvancedParameters
-
Returns the friction function.
- frictionOption - Variable in class nxopen.uf.UFMotion.Motion3DContact
-
- frictionProfile() - Method in interface nxopen.motion.TirePropertyAdvancedParameters
-
Returns the friction Profile.
- frictionSurfaceFile() - Method in interface nxopen.motion.TirePropertyAdvancedParameters
-
Returns the friction surface file
License requirements: mechanisms ("MECHANISMS")
.
- frictionSurfaceProfile() - Method in interface nxopen.motion.TirePropertyAdvancedParameters
-
Returns the friction surface profile
License requirements: mechanisms ("MECHANISMS")
.
- frictionTorque - Variable in class nxopen.tooling.SIZERExportBuilder.MCDMechanicalData
-
Friction Torque value
- frictionTorque - Variable in class nxopen.tooling.SIZERExportBuilder.MechanicalData
-
Friction Torque value
- frictionType() - Method in interface nxopen.motion.TirePropertyAdvancedParameters
-
Returns the friction type.
- frictionVelocity() - Method in interface nxopen.motion.BodyContactLms
-
Returns the friction velocity
License requirements: None.
- frictionVelocity() - Method in interface nxopen.motion.BodyContactSphereToCAD
-
Returns the friction velocity
License requirements: None.
- frictionVelocityExpression() - Method in interface nxopen.motion.BodyContactAdams
-
Returns the friction velocity expression
License requirements: None.
- frictionVelocityExpression() - Method in interface nxopen.motion.BodyContactRecurdyn
-
Returns the friction velocity expression
License requirements: None.
- friendlyName() - Method in interface nxopen.userdefinedobjects.UserDefinedClass
-
- FRINGE - Static variable in class nxopen.cae.Post.DisplayColorSchemeType
-
- FRINGE - Static variable in class nxopen.geometricanalysis.DistanceAnalysisBuilder.DisplayModes
-
Display in fringe.
- FRINGE - Static variable in class nxopen.geometricanalysis.RadiusAnalysisBuilder.DisplayModes
-
Display in fringe.
- FRINGE - Static variable in class nxopen.geometricanalysis.SlopeAnalysisBuilder.DisplayModes
-
- from() - Method in interface nxopen.cam.BladeCutStart
-
Returns the location of the cut start
License requirements: None.
- FROM - Static variable in class nxopen.cam.CamOperationMotionType
-
- FROM - Static variable in class nxopen.cam.CamPathMotionType
-
- from() - Method in interface nxopen.features.sheetmetal.NormalCutoutBuilder
-
Returns the face or datum plane from which the cutout begins.
- FROM - Static variable in class nxopen.routing.RunItem.Type
-
A "From" item type.
- FROM_APOINT - Static variable in class nxopen.cam.TurnEngageRetractBuilder.Types
-
From a Point
- FROM_BASE - Static variable in class nxopen.die.HandlingCoreBuilder.Types
-
Location is an offset from the base.
- FROM_BODY - Static variable in class nxopen.preferences.GeneralWireframeColorSourceOption
-
From Body
- FROM_BOTH_ENDS - Static variable in class nxopen.features.sheetmetal.FlangeBendPropertiesBuilder.WidthOptions
-
- FROM_BOTH_ENDS - Static variable in class nxopen.features.sheetmetal.FlangeBuilder.WidthTypeOptions
-
The flange starts and ends at specified distances from the ends of the edge.
- FROM_BOTH_ENDS - Static variable in class nxopen.features.sheetmetal.SheetmetalManagerFlangeWidthOption
-
from both ends
- FROM_BOTTOM - Static variable in class nxopen.annotations.LeaderOrientation
-
- FROM_CAP - Static variable in class nxopen.features.RibBuilder.RibDraftOptions
-
Draft from cap
- FROM_CHARACTERISTIC - Static variable in class nxopen.routing.ModelTerminalsBuilder.CutBackLocationOption
-
FromCharacteristic
- FROM_CHARACTERISTIC - Static variable in class nxopen.routing.ModelTerminalsBuilder.ExtensionValueOption
-
FromCharacteristic
- FROM_COORDINATE_SYSTEMS - Static variable in class nxopen.mechatronics.PathConstraintJointBuilder.PathTypes
-
from coordinate systems
- FROM_CURVE - Static variable in class nxopen.cam.ToolPathTiltTilting.ToolAxisTypes
-
Tool axis mode: from curve
- FROM_CURVES - Static variable in class nxopen.annotations.Centerline2dBuilder.Types
-
centerline from curves
- FROM_CURVES - Static variable in class nxopen.mechatronics.PathConstraintJointBuilder.PathTypes
-
from curves
- FROM_DATUM - Static variable in class nxopen.cam.InspectionMoveBuilder.DepthMethodTypes
-
Distance from datum
- FROM_DATUM_PLANE - Static variable in class nxopen.display.DatumPlaneGridBuilder.GridOrientationType
-
Grid display matches
datum plane display
- FROM_DIALOG - Static variable in class nxopen.tooling.ReusePositioningObjectBuilder.DialogOptions
-
called by other dialog
- FROM_DIRECTORY - Static variable in class nxopen.LoadOptions.LoadMethod
-
use same directory as the parent assembly
- FROM_EDGE_END - Static variable in class nxopen.features.sheetmetal.FlangeBuilder.WidthTypeOptions
-
The flange starts at a specified distance from an end of the edge.
- FROM_EDGES - Static variable in class nxopen.features.DraftBodyBuilder.MatchingType
-
Match type from edges
- FROM_EEF - Static variable in class nxopen.cae.responsesimulation.InitialConditions.EntryMethod
-
- FROM_END - Static variable in class nxopen.die.DirectionOption
-
Profile direction is aligned with the first curve from the end to start.
- FROM_END - Static variable in class nxopen.features.sheetmetal.FlangeBendPropertiesBuilder.WidthOptions
-
- FROM_END - Static variable in class nxopen.features.sheetmetal.SheetmetalManagerFlangeWidthOption
-
from end
- FROM_END - Static variable in class nxopen.features.shipdesign.OrientationPointMethodsBuilder.PointMethodTypes
-
The boundary is defined by a distance from the end of the landing curve.
- FROM_END_FACE - Static variable in class nxopen.weld.WeldGrooveBuilder.Taper
-
From End Face
- FROM_END_FACE - Static variable in class nxopen.weld.WeldTaperMethod
-
Taper will be measured from groove end caps
- FROM_EXPRESSION - Static variable in class nxopen.tooling.ReusePositioningObjectBuilder.DialogOptions
-
dialog from expression
- FROM_EXTERIOR - Static variable in class nxopen.cae.FluidDomainBuilder.IntExtType
-
Wrap from the exterior.
- FROM_FACE - Static variable in class nxopen.annotations.SymmetricalCenterlineBuilder.Types
-
Centerline from face
- FROM_FACE - Static variable in class nxopen.preferences.GeneralWireframeColorSourceOption
-
From Face
- FROM_FEATURE_ACTUAL - Static variable in class nxopen.cam.InspectionMoveBuilder.DepthMethodTypes
-
Distance from feature actual
- FROM_FEATURE_NOMINAL - Static variable in class nxopen.cam.InspectionMoveBuilder.DepthMethodTypes
-
Distance from feature nominal
- FROM_FILE - Static variable in class nxopen.presslinesimulation.UserMotionBuilder.CurveType
-
- FROM_FILE - Static variable in class nxopen.tooling.UserDefinedMotionBuilder.LinearCurveTypes
-
Motion curve data read from file type
- FROM_FILE - Static variable in class nxopen.tooling.UserDefinedMotionBuilder.RotaryCurveTypes
-
Motion curve data read from file type
- FROM_FIRST_CURVE - Static variable in class nxopen.cam.GuidedCurveCutOrder.CutOrderOption
-
- FROM_FOLDER - Static variable in class nxopen.tooling.RenameAndExportComponentBuilder.LoadOptionType
-
- FROM_GACONTAINER - Static variable in class nxopen.features.shipdesign.GeneralArrangementViewBuilder.InheritedPMISourceOption
-
Copy PMI label from General Arrangement Deck Container
- FROM_GADRAWING - Static variable in class nxopen.features.shipdesign.GeneralArrangementViewBuilder.InheritedPMISourceOption
-
Copy PMI label from General Arrangement Drawing Root part
- FROM_GAROOT - Static variable in class nxopen.features.shipdesign.GeneralArrangementViewBuilder.InheritedPMISourceOption
-
Copy PMI label from General Arrangement Root part
- FROM_GEOMETRY - Static variable in class nxopen.cam.GeometryGroup.BlankDefinitionTypes
-
blank defined through selected geometry
- FROM_GEOMETRY - Static variable in class nxopen.cam.InferredDouble.Lock
-
Lock: From Geometry
- FROM_GUIDE_CURVE - Static variable in class nxopen.features.AeroFlangeBuilder.LimitObjectTypes
-
- FROM_GUIDE_CURVE - Static variable in class nxopen.features.AeroRibBuilder.LimitObjectTypes
-
- FROM_IMAGE - Static variable in class nxopen.display.ImageBaseBuilder.TransparencyColorFrom
-
Transparency Color from image
- FROM_ITEMS - Static variable in class nxopen.routing.IntegrateRunsBuilder.Button
-
Set as FromItem for selected node in tree list
- FROM_LEFT - Static variable in class nxopen.annotations.LeaderOrientation
-
- FROM_LIBRARY - Static variable in class nxopen.ame.QueryBuilder.Types
-
- FROM_MESH_POLYGON_BODIES - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide from mesh polygon bodies
- FROM_MODEL - Static variable in class nxopen.cam.fbm.ThreadFeatureGeometry.ThreadDataSource
-
From Model
- FROM_MODEL - Static variable in class nxopen.cam.HoleBossGeom.FormPitchTypes
-
Form and Pitch: From Model
- FROM_MODEL_VIEW - Static variable in class nxopen.preferences.GdtOption
-
inherit display instances of geometric tolerance features that exist in a particular modeling view (e.g.
- FROM_MODEL_VIEW - Static variable in class nxopen.preferences.PmiOption
-
Inherit PMI from the parent model view.
- FROM_OFFSET_FILE - Static variable in class nxopen.features.vehicledesign.TireEnvelopeBuilder.EnvelopeOffsetMethod
-
From the offset file.
- FROM_PARENT_RESULT - Static variable in class nxopen.cae.DurabilityDataControlBuilder.TimeExtentsEnum
-
From Parent Result
- FROM_PARTS - Static variable in class nxopen.routing.PathStockBuilder.AssignMethod
-
Find stocks from the part table
of parts selected by the user.
- FROM_POINT - Static variable in class nxopen.cam.ToolPathTiltTilting.ToolAxisTypes
-
Tool axis mode: from point
- FROM_POINTS - Static variable in class nxopen.weld.WeldPointMethod
-
create fix/single/none points using existing points
- FROM_RESULT - Static variable in class nxopen.cae.ResultsManipulationBuilder.UnitsSystem
-
- FROM_RIGHT - Static variable in class nxopen.annotations.LeaderOrientation
-
- FROM_SEARCH_FOLDER - Static variable in class nxopen.tooling.RenameAndExportComponentBuilder.LoadOptionType
-
- FROM_SECOND_AXIS - Static variable in class nxopen.cae.CorrelAlignmentBuilder.ScalingChoice
-
Computed from the lenght of the second axis
- FROM_SECTION - Static variable in class nxopen.features.RibBuilder.RibCapGeometryOptions
-
Cap from section
- FROM_SELECTED - Static variable in class nxopen.features.AeroFlangeBuilder.LimitObjectTypes
-
- FROM_SELECTED - Static variable in class nxopen.features.AeroRibBuilder.LimitObjectTypes
-
- FROM_SELECTED - Static variable in class nxopen.features.RibBuilder.RibCapGeometryOptions
-
Cap from selected
- FROM_SELECTED - Static variable in class nxopen.geometricutilities.CurveLengthBuilder.EndObjectType
-
- FROM_SIDE_FACE - Static variable in class nxopen.weld.WeldTaperMethod
-
Taper will be measured from groove side face
- FROM_SOURCE_PART - Static variable in class nxopen.features.shipdesign.GeneralArrangementViewBuilder.InheritedPMISourceOption
-
Copy PMI label from the selected source part
- FROM_SPINDLE_LINES - Static variable in class nxopen.features.vehicledesign.TireEnvelopeBuilder.MotionMethod
-
From lines that define the locations of the suspension components.
- FROM_START - Static variable in class nxopen.die.DirectionOption
-
Profile direction is aligned with the first curve from the start to end.
- FROM_START - Static variable in class nxopen.features.shipdesign.OrientationPointMethodsBuilder.PointMethodTypes
-
The boundary is defined by a distance from the start of the landing curve.
- FROM_START_OBJECT - Static variable in class nxopen.mechanicalrouting.PathStockPreferenceBuilder.AssignMethod
-
Deprecated.
Finds a stock based off of the
default stock and the object selected by the user.
- FROM_START_OBJECT - Static variable in class nxopen.mechanicalrouting.PathStockPreferenceBuilder.SpaceReservationMethod
-
Finds a stock based off of the
default stock and the object selected by the user.
- FROM_START_OBJECT - Static variable in class nxopen.routing.PathStockBuilder.AssignMethod
-
Finds a stock based off of the
default stock and the object
selected by the user.
- FROM_SUPPORT - Static variable in class nxopen.cae.connections.MaterialType
-
Material defined from support
- FROM_TABLE - Static variable in class nxopen.cam.fbm.ThreadFeatureGeometry.ThreadDataSource
-
From Table
- FROM_TABLE - Static variable in class nxopen.cam.HoleBossGeom.FormPitchTypes
-
Form and Pitch: From Table
- FROM_TEMPLATE - Static variable in class nxopen.pdm.PartOperationCreateBuilder.OperationSubType
-
Create New Part from template
- FROM_TO - Static variable in class nxopen.features.sheetmetal.NormalCutoutBuilder.DepthTypeOptions
-
From To
- FROM_TOOL - Static variable in class nxopen.cam.HoleBossGeom.FormPitchTypes
-
Form and Pitch: From Tool
- FROM_TOOL - Static variable in class nxopen.cam.RoughTurningBuilder.LevelDepthModeTypes
-
Level depth mode: From Tool
- FROM_TOOLBAR - Static variable in class nxopen.tooling.ReusePositioningObjectBuilder.DialogOptions
-
dialog from toolbar
- FROM_TOP - Static variable in class nxopen.annotations.LeaderOrientation
-
- FROM_TOP_FACE - Static variable in class nxopen.weld.WeldGrooveBuilder.Taper
-
From Top Face
- FROM_WORK_MODEL - Static variable in class nxopen.cae.CorrelSolutionBuilder.EnumDampingFrftype
-
from work model
- fromCachedAnalytics - Variable in class nxopen.uf.UFFacet.AskSurfaceDataForFaceData
-
- fromCsys() - Method in interface nxopen.features.sheetmetal.SolidPunchBuilder
-
Returns the csys that defines the start of transformation of the tool body.
- fromCsys() - Method in interface nxopen.geometricutilities.ModlMotion
-
- fromCSYS() - Method in interface nxopen.geometricutilities.PatternOrientation
-
Returns the fromCSYS, a CSYS for certain pattern type orientation need.
- fromCurveList() - Method in interface nxopen.cam.GuidedCurveBuilder
-
Returns the Drive Curve List
License requirements: None.
- fromDateItem() - Method in interface nxopen.DateBuilder
-
- fromexcitation - Variable in class nxopen.cae.responsesimulation.CSDExcitationBuilder.CSDFunction
-
- fromFace - Variable in class nxopen.uf.UFModl.DfoConstraint
-
- fromItems - Variable in class nxopen.uf.UFRouteRun.AskFromItemsData
-
- fromItemsList() - Method in interface nxopen.routing.DefineRunBuilder
-
Returns the FROM items list of the run.
- fromJtFile - Variable in class nxopen.uf.UFPart.AskJtInfoOfPartData
-
- fromLeadingEdge() - Method in interface nxopen.cam.MillCutParameters
-
Returns the from leading edge
License requirements: None.
- fromLocation() - Method in interface nxopen.geometricutilities.BetweenLocationsData
-
Returns the from location
License requirements: None.
- fromLocationCsys2d() - Method in interface nxopen.geometricutilities.GeneralPattern
-
Returns the from location 2d csys
License requirements: None.
- fromLocationCsys3d() - Method in interface nxopen.geometricutilities.GeneralPattern
-
Returns the from location 3d csys
License requirements: None.
- fromLocationPoint() - Method in interface nxopen.geometricutilities.GeneralPattern
-
Returns the from location point
License requirements: None.
- fromLocationType() - Method in interface nxopen.geometricutilities.GeneralPattern
-
Returns the from location type
License requirements: None.
- fromPoint() - Method in interface nxopen.cam.TurnAvoidanceFromBuilder
-
Returns the from point
License requirements: None.
- fromPoint() - Method in interface nxopen.cam.WedmBasedGeomBuilder
-
Returns the From Point
License requirements: cam_base ("CAM BASE")
.
- fromPoint() - Method in interface nxopen.features.MoveFaceBuilder
-
Returns the from point in point to point option in move face, don't use it until nx502
License requirements: None.
- fromPoint() - Method in interface nxopen.formboard.OrientBranchBuilder
-
- fromPoint() - Method in interface nxopen.geometricutilities.ModlMotion
-
- fromPoint() - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder
-
Returns the from point
License requirements: die_engineering ("DIE ENGINEERING")
.
- fromPointBuilder() - Method in interface nxopen.cam.NcmWedmBuilder
-
Returns the from point builder
License requirements: cam_base ("CAM BASE")
.
- fromPointMode() - Method in interface nxopen.cam.TurnAvoidanceFromBuilder
-
Returns the from point mode
License requirements: None.
- fromPointSet() - Method in interface nxopen.geometricutilities.PointSetAlignmentBuilder
-
Returns the "from" point set
License requirements: None.
- fromPointStatus() - Method in interface nxopen.cam.WedmBasedGeomBuilder
-
Returns the From Point Status
License requirements: cam_base ("CAM BASE")
.
- fromPointToolAxis() - Method in interface nxopen.cam.WedmBasedGeomBuilder
-
Returns the From Point Tool Axis
License requirements: cam_base ("CAM BASE")
.
- fromReuseFeatures() - Method in interface nxopen.weld.JointmarkBuilder
-
Initializes face sets, guide curve, and points builders from reuse features.
- FromReuseFeaturesData() - Constructor for class nxopen.weld.JointmarkBuilder.FromReuseFeaturesData
-
- fromSeedStart - Variable in class nxopen.CurveChainRule.Data
-
True: the chain starts from the start
point of the seed curve
- fromSeedStart - Variable in class nxopen.CurveFeatureChainRule.Data
-
True: the chain starts from the start
point of the seed curve
- fromSeedStart - Variable in class nxopen.FollowFilletRule.Data
-
True: the chain starts from the start point of the seed wireframe
- fromStart - Variable in class nxopen.features.EdgeBlendBuilder.SetbackData
-
if true, then the setback is defined at the start
vertex.
- fromStart - Variable in class nxopen.features.EdgeBlendBuilder.StopshortData
-
if true, then the stopshort is defined at the start
vertex.
- fromStart - Variable in class nxopen.uf.UFModl.EdgeBlendSetbackData
-
- fromStart - Variable in class nxopen.uf.UFModl.EdgeBlendStopshortData
-
- fromStation() - Method in interface nxopen.tooling.StripLayoutBuilder
-
Returns the From Station type on the Layout group of Strip Layout Design dialog
License requirements: None.
- fromTerminal() - Method in interface nxopen.routing.electrical.Connection
-
Returns the From terminal.
- fromTrailingEdge() - Method in interface nxopen.cam.MillCutParameters
-
Returns the from trailing edge
License requirements: None.
- fromVector() - Method in interface nxopen.features.MoveFaceBuilder
-
Returns the from vector in axis to axis option in move face, don't use it until nx502
License requirements: None.
- fromVector() - Method in interface nxopen.formboard.OrientBranchBuilder
-
- fromVector() - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder
-
Returns the from vector
License requirements: die_engineering ("DIE ENGINEERING")
.
- fromView() - Method in interface nxopen.drawings.ViewProjectionBuilder
-
Returns the from view
License requirements: nx_layout ("NX Layout")
.
- FRONT - Static variable in class nxopen.cam.ToolChangeCiBuilder.HeadDesignationTypes
-
Front
- FRONT - Static variable in class nxopen.display.Stage.WallType
-
The front wall of the stage.
- FRONT - Static variable in class nxopen.drawings.View2dOrientBuilder.Type
-
front view
- FRONT - Static variable in class nxopen.features.vehicledesign.CrashBarrierBuilder.SideOverlapSideType
-
- FRONT - Static variable in class nxopen.features.vehicledesign.DynamicCurbBuilder.PositionType
-
- FRONT - Static variable in class nxopen.features.vehicledesign.GroundClearanceBuilder.PositionType
-
- FRONT - Static variable in class nxopen.features.vehicledesign.OilPanBuilder.PositionType
-
- FRONT - Static variable in class nxopen.features.vehicledesign.PendulumPlacementBuilder.LocationType
-
- FRONT - Static variable in class nxopen.features.vehicledesign.SlopeBuilder.PositionType
-
- FRONT - Static variable in class nxopen.features.vehicledesign.StaticCurbBuilder.PositionType
-
Front
- FRONT - Static variable in class nxopen.features.vehicledesign.WheelCoveringBuilder.PositionType
-
Creates checking surface for front wheel only
- FRONT - Static variable in class nxopen.features.vehicledesign.WheelFixingBuilder.PositionType
-
- FRONT - Static variable in class nxopen.Light.SceneType
-
Light from the front of the view (at
the observer's location
- FRONT - Static variable in class nxopen.tooling.AssemblyDrawingBuilder.ModelViewToUseValue
-
- FRONT - Static variable in class nxopen.View.Canned
-
- FRONT_LEFT - Static variable in class nxopen.drawings.StandardViewsBuilder.Type
-
front, left
- FRONT_PASSENGER - Static variable in class nxopen.HumanPosturePredictionBuilder.OccupantType
-
Indicate Front passenger
- FRONT_RIGHT - Static variable in class nxopen.drawings.StandardViewsBuilder.Type
-
front, right
- FRONT_TO_REAR - Static variable in class nxopen.features.vehicledesign.GroundClearanceBuilder.SurfaceLengthType
-
- FRONT_TOP - Static variable in class nxopen.drawings.StandardViewsBuilder.Type
-
front, top
- FRONT_TOP_LEFT - Static variable in class nxopen.drawings.StandardViewsBuilder.Type
-
front, top, left
- FRONT_TOP_LEFT_ISO - Static variable in class nxopen.drawings.StandardViewsBuilder.Type
-
front, top, left, iso
- FRONT_TOP_RIGHT - Static variable in class nxopen.drawings.StandardViewsBuilder.Type
-
front, top, right
- FRONT_TOP_RIGHT_ISO - Static variable in class nxopen.drawings.StandardViewsBuilder.Type
-
front, top, right, iso
- FRONT_VIEW - Static variable in class nxopen.features.vehicledesign.CloseRangeVisibilityBuilder.PositionMethods
-
Front view
- FRONTAL_SOLVER - Static variable in class nxopen.uf.UFConstants
-
- frontAngle() - Method in interface nxopen.features.vehicledesign.SlopeBuilder
-
Returns the expression containing the front angle.
- frontAngle() - Method in interface nxopen.features.vehicledesign.StaticCurbBuilder
-
Returns the expression containing the front angle.
- frontBottomOffset() - Method in interface nxopen.features.vehicledesign.WheelCoveringBuilder
-
- frontClearance() - Method in interface nxopen.features.vehicledesign.WheelCoveringBuilder
-
Returns the clearance of the front surface section.
- frontClip() - Method in interface nxopen.drawings.ViewStylePerspectiveBuilder
-
Returns the front clip toggle on the PERSPECTIVE tab of the View Style Dialog
License requirements: None.
- frontClipDistance() - Method in interface nxopen.drawings.ViewStylePerspectiveBuilder
-
Returns the front clip distance data on the PERSPECTIVE tab of the View Style Dialog
License requirements: None.
- frontClipping() - Method in interface nxopen.drawings.PerspectiveViewStyle
-
Returns the status of front clipping
License requirements: None.
- frontClippingDistance() - Method in interface nxopen.display.CameraBuilder
-
Returns the front clipping distance
License requirements: None.
- frontClippingDistance() - Method in interface nxopen.drawings.PerspectiveViewStyle
-
Returns the value of front clipping distance
License requirements: None.
- frontCollector() - Method in interface nxopen.features.vehicledesign.BumperPendulumBuilder
-
Returns the selected front body.
- frontCrossPosition() - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder
-
Returns the cross position type of front barrier.
- frontDim() - Method in interface nxopen.features.vehicledesign.VisionPlaneBuilder
-
Returns the front dim; dimension here to front.
- frontDraftAngle() - Method in interface nxopen.geometricutilities.MultiDraft
-
Returns the front draft angle.
- frontFacetBodies() - Method in interface nxopen.features.vehicledesign.BumperPendulumBuilder
-
Returns the selected front facet body
License requirements: None.
- frontFrontAngle() - Method in interface nxopen.features.vehicledesign.WheelCoveringBuilder
-
Returns the front angle of the front surface section.
- frontFrontOffset() - Method in interface nxopen.features.vehicledesign.WheelCoveringBuilder
-
- frontHeaderFeature() - Method in interface nxopen.features.vehicledesign.HeadImpactBuilder
-
Returns the front header feature for this head impact study.
- frontHeadRestGeometry() - Method in interface nxopen.features.vehicledesign.AllAroundVisionBuilder
-
Returns the faces representing the front head rest geometry to use as obstructing elements.
- frontHeight() - Method in interface nxopen.features.vehicledesign.WheelCoveringBuilder
-
- frontHeightAboveRoad() - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder
-
Returns the expression containing the height above road value of front barrier.
- frontHubcapSelection() - Method in interface nxopen.features.vehicledesign.WheelCoveringBuilder
-
Returns the front hub cap selection.
- frontInnerLength() - Method in interface nxopen.features.vehicledesign.DynamicCurbBuilder
-
Returns the expression defining the length of the inner line in front for dynamic curb.
- frontInnerOffset() - Method in interface nxopen.features.vehicledesign.DynamicCurbBuilder
-
Returns the expression defining the value of inner offset in front for dynamic curb.
- frontInsertLength() - Method in interface nxopen.cam.DrillBoringBarTool
-
Returns the Front Insert Length
License requirements: None.
- frontLoading() - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder
-
Returns the loading applied to the vehicle front used in the crash barrier.
- frontLoading() - Method in interface nxopen.features.vehicledesign.SlopeBuilder
-
Returns the loading applied to the vehicle front used in the slope.
- frontLoading() - Method in interface nxopen.features.vehicledesign.StaticCurbBuilder
-
Returns the loading applied to the vehicle front used in the static curb.
- frontMeasuredFaces() - Method in interface nxopen.features.vehicledesign.StaticCurbBuilder
-
Returns the selected front faces for measurement.
- frontObjects() - Method in interface nxopen.features.vehicledesign.SlopeBuilder
-
Returns the selected front faces for slope measurement.
- frontObjectSelection() - Method in interface nxopen.features.vehicledesign.WheelCoveringBuilder
-
Returns the front object selection.
- frontOffset() - Method in interface nxopen.features.vehicledesign.StaticCurbBuilder
-
Returns the expression containing the front offset.
- frontOffsetValue() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
Returns the expression containing the offset value of the front section(at 0 degrees).
- frontOuterOffset() - Method in interface nxopen.features.vehicledesign.DynamicCurbBuilder
-
Returns the expression defining the value of outer offset in front for dynamic curb.
- frontOverhangExp() - Method in interface nxopen.features.vehicledesign.BaseDataBuilder
-
Returns the front overhang of the vehicle which is measured from the front wheel center point in the negative x direction.
- frontOverlapPercentage() - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder
-
Returns the expression containing the overlap percentage of front barrier.
- frontOverlapSide() - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder
-
Returns the overlap side type of front barrier.
- frontPlane() - Method in interface nxopen.features.vehicledesign.VisionPlaneBuilder
-
Returns the front plane inclined angle.
- frontPositionObject() - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder
-
Returns the positioing object type of front barrier.
- frontProximity() - Method in interface nxopen.features.shipdesign.SectionEditorBuilder
-
Returns the ship section front proximity
License requirements: None.
- frontProximity() - Method in interface nxopen.features.shipdesign.SectionViewBuilder
-
Returns the front proximity value
License requirements: None.
- frontRadius() - Method in interface nxopen.features.vehicledesign.WheelCoveringBuilder
-
- frontRearAngle() - Method in interface nxopen.features.vehicledesign.WheelCoveringBuilder
-
Returns the rear angle of the front surface section.
- frontRearOffset() - Method in interface nxopen.features.vehicledesign.WheelCoveringBuilder
-
- frontRefAngle() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the angle that is used to determine the front reference line
License requirements: None.
- frontRefAngleMarginal() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the marginal angle that is used to determine the front reference line
License requirements: None.
- frontRefAngleNcap() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the European NCAP (New Car Assessment Program) angle that is used to determine the front reference line
License requirements: None.
- frontRefAngleNcapMarginal() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the European NCAP (New Car Assessment Program) marginal angle that is used to determine the front reference line
License requirements: None.
- frontReferenceAngleNcapSecondMarginal() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the European NCAP (New Car Assessment Program) second marginal angle that is used to determine the front reference line
License requirements: None.
- frontReferenceAngleSecondMarginal() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the second marginal angle that is used to determine the front reference line
License requirements: None.
- frontSelector() - Method in interface nxopen.features.vehicledesign.DynamicCurbBuilder
-
Returns the faces representing the front car body geometry for the measurement.
- frontSelectPositioningFacetBodies() - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder
-
Returns the positioing facet objects of front barrier.
- frontSelectPositioningObject() - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder
-
Returns the positioing objects of front barrier.
- frontShape() - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder
-
Returns the shape type of front barrier.
- frontShift() - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder
-
Returns the expression containing the shift value of front barrier.
- frontShoulderRoom() - Method in interface nxopen.features.vehicledesign.BaseDataDriverBuilder
-
Returns the front shoulder room.
- frontSurfacePlane() - Method in interface nxopen.features.vehicledesign.WheelCoveringBuilder
-
Returns the surface plane type of the front surface section.
- frontSurfaceSection() - Method in interface nxopen.features.vehicledesign.WheelCoveringBuilder
-
Returns the surface section type of the front surface section.
- frontUnderAxleFace() - Method in interface nxopen.features.vehicledesign.GroundClearanceBuilder
-
Returns the faces representing the car body geometry for measuring distance to the front under axle surface.
- frontUserDefineWidth() - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder
-
Returns the user defined width type of front barrier.
- frontUserDefineWidthValue() - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder
-
Returns the expression containing the user defined width value of front barrier.
- frontView() - Method in interface nxopen.drawings.ViewCreationWizardBuilder
-
Returns the front view
License requirements: None.
- FRONTWARD - Static variable in class nxopen.features.vehicledesign.BaseDataPassengerBuilder.SeatDirectionOptions
-
Seat position driving direction
- frontWheel() - Method in interface nxopen.features.vehicledesign.BaseDataLoadingBuilder
-
Returns the front wheel data of this loading.
- FROZEN - Static variable in class nxopen.cae.optimization.TBSTopologyRestrictAreaBuilder.CheckTypeOption
-
All elements of the element group which do not undergo any
changes during optimization
- FROZEN_LAYER_RATIO - Static variable in class nxopen.tooling.FlowDisplayBuilder.AnalysisResults
-
- frozenColor() - Method in interface nxopen.features.subdivision.DefineWorkRegionBuilder
-
Returns the frozen region color
License requirements: None.
- frozenDelayed - Variable in class nxopen.PartDelayedUpdateStatus.DelayStatusInfo
-
The part is frozen for all sessions.
- frozenRegionDefinitionMethod() - Method in interface nxopen.features.subdivision.DefineWorkRegionBuilder
-
Returns the frozen region method
License requirements: None.
- FS_RGB - Static variable in class nxopen.ModelingViewHighQualityImage.DisplayTechniqueType
-
The pixel conversion process uses the Floyd-Steinberg dither
algorithm to distribute the color error across the picture.
- FS_RGB_PLUS_NOISE - Static variable in class nxopen.ModelingViewHighQualityImage.DisplayTechniqueType
-
The Floyd-Steinberg algorithm is augmented with the addition
of random noise to the initial RGB values before the dither
takes place.
- fsyncarcs - Variable in class nxopen.uf.UFSf.GeomOptions
-
- fsyncconics - Variable in class nxopen.uf.UFSf.GeomOptions
-
- fsynccsys - Variable in class nxopen.uf.UFSf.GeomOptions
-
- fsynclines - Variable in class nxopen.uf.UFSf.GeomOptions
-
- fsyncpoints - Variable in class nxopen.uf.UFSf.GeomOptions
-
- fsyncsketchcurves - Variable in class nxopen.uf.UFSf.GeomOptions
-
- fsyncsplines - Variable in class nxopen.uf.UFSf.GeomOptions
-
- FT - Static variable in class nxopen.cae.FEModelOccAttribute.AltRepLengthUnitType
-
Length unit of foot
- FT_POUND_FORCE - Static variable in class nxopen.cae.FreeBodyResultsBuilder.OutputUnits
-
Load unit = "lbf", Moment unit lbf-ft
- FT_POUND_FORCE - Static variable in class nxopen.cae.MechanicalLoadSumBuilder.UserUnit
-
Load unit = "lbf", Moment unit lbf-ft
- FTIRE - Static variable in class nxopen.motion.TireBuilder.Type
-
for FTire Tire Model
- ftireFile() - Method in interface nxopen.motion.TirePropertyFtBuilder
-
Returns the FTire file.
- FTK - Static variable in class nxopen.motion.GraphBuilder.PlotStyleChoices
-
Deprecated.
To FTK
- FTK_NAV_TREE_HISTORY_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- FTK_NAV_TREE_HISTORY_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- FTKManager - Interface in nxopen.cae.ftk
-
- ftkmanager() - Method in interface nxopen.Session
-
Returns the
FTKManager
belonging to this session
Created in NX3.0.0
- FtmFixedCurvesBuilder - Interface in nxopen.geometricutilities
-
- FtmFixedCurvesBuilder.FixedCurvesContinuityType - Class in nxopen.geometricutilities
-
Fixed curves continuity type
- FtmFixedCurvesBuilderList - Interface in nxopen.geometricutilities
-
Represents a list of objects.
- FtmTransformCurvesBuilder - Interface in nxopen.geometricutilities
-
- FtmTransformCurvesBuilder.TransformCurvesContinuityType - Class in nxopen.geometricutilities
-
Transform curves continuity type
- FtmTransformCurvesBuilderList - Interface in nxopen.geometricutilities
-
Represents a list of objects.
- FtmTransformPointsBuilder - Interface in nxopen.geometricutilities
-
- FtmTransformPointsBuilderList - Interface in nxopen.geometricutilities
-
Represents a list of objects.
- FULL - Static variable in class nxopen.cae.optimization.TBSSmoothBuilder.OriginalSurfaceSmoothingOption
-
Allows any modifications to the original surface
- FULL - Static variable in class nxopen.cae.optimization.TBSSmoothBuilder.ResultFiltering
-
Filters the element material values fully
- FULL - Static variable in class nxopen.cae.ResultsManipulationBuilder.OutputResultType
-
- FULL - Static variable in class nxopen.cae.SetManager.DistributedPlanesBoundingSphereType
-
places the distributed planes on a full sphere
- FULL - Static variable in class nxopen.cam.InspectionMethodBuilder.PolarAngleModeTypes
-
Full circumference
- FULL - Static variable in class nxopen.cam.InspectionMethodBuilder.UVModeTypes
-
Full circumference
- FULL - Static variable in class nxopen.cam.MillingTrackpointBuilder.Types
-
Full
- FULL - Static variable in class nxopen.drawings.RotationSymbolTypes
-
- FULL - Static variable in class nxopen.features.HolePackageBuilder.ThreadLengthOptions
-
Length is full hole depth
- FULL - Static variable in class nxopen.features.sheetmetal.DimpleBuilder.DimensionTypeOptions
-
the actual extent distance will be the value specified as depth.
- FULL - Static variable in class nxopen.features.sheetmetal.FlangeBendPropertiesBuilder.WidthOptions
-
- FULL - Static variable in class nxopen.features.sheetmetal.JogBuilder.DimensionTypeOptions
-
the actual extent distance will be the value specified as depth.
- FULL - Static variable in class nxopen.features.ShelfBuilder.LengthMethods
-
- FULL - Static variable in class nxopen.features.shipdesign.SectionViewBuilder.SymmetricalStructureOptions
-
Show full section view of the bulkhead
- FULL - Static variable in class nxopen.geometricutilities.CircularFrameBuilder.Subtypes
-
Full circle
- FULL - Static variable in class nxopen.geometricutilities.EndHoleData.ThreadLengthOptions
-
Length is full hole depth
- FULL - Static variable in class nxopen.GroupBuilder.UngroupOption
-
Delete a group recursively
- FULL - Static variable in class nxopen.preferences.SessionVisualizationHighEndRendering.MaterialEditorEditingMode
-
Studio Material Editor in Full properties mode
- FULL - Static variable in class nxopen.Session.ProjectAssignmentState
-
to assign project to all objects
- FULL_BOTH_EDGES - Static variable in class nxopen.features.sheetmetal.BridgeTransitionBuilder.WidthOptions
-
Bridge Transition spans the full length of both the edges.
- FULL_CIRCLE - Static variable in class nxopen.SketchPattern.InstanceControl
-
The pattern instance control type is Full Circle
- FULL_CYCLE - Static variable in class nxopen.cae.Post.AnimationControl
-
- FULL_EDGE - Static variable in class nxopen.features.sheetmetal.FlangeBuilder.WidthTypeOptions
-
The flange spans the entire edge.
- FULL_END_EDGE - Static variable in class nxopen.features.sheetmetal.BridgeTransitionBuilder.WidthOptions
-
Bridge Transition spans the full length of end edge.
- FULL_GRID - Static variable in class nxopen.cae.xyplot.ContouringRange
-
Option to show contour range on the face of the grid
- FULL_HISTORY - Static variable in class nxopen.cae.DurSpecialistSuperpositionEventBuilder.RangeType
-
All the points of the load history are taken
- FULL_PART - Static variable in class nxopen.drawings.SectionViewBuilder.SectionCutType
-
- FULL_RENDER - Static variable in class nxopen.display.TrueStudioBuilder.RenderMethod
-
All rendering effects are honored.
- FULL_SCALE - Static variable in class nxopen.CGMBuilder.SizeOption
-
Full Scale
- FULL_SCALE - Static variable in class nxopen.PrintPDFBuilder.SizeOption
-
Full Scale
- FULL_SHATTER - Static variable in class nxopen.JtCreator.FileStructure
-
FULL_SHATTER
- FULL_SINE_WAVE - Static variable in class nxopen.cae.DurabilityLoadPatternBuilder.PatternTypeEnum
-
Full
- FULL_SIZE_FRACTION - Static variable in class nxopen.annotations.DimensionTextFormat
-
Specifies full size fraction format
- FULL_SIZE_FRACTION - Static variable in class nxopen.uf.UFDrf.FractionType
-
- FULL_START_EDGE - Static variable in class nxopen.features.sheetmetal.BridgeTransitionBuilder.WidthOptions
-
Bridge Transition spans the full length of start edge.
- FULL_UNIT_CYCLE - Static variable in class nxopen.uf.UFSf.LvFunctionMode
-
- FULL_VEHICLE - Static variable in class nxopen.features.vehicledesign.GroundClearanceBuilder.SurfaceLengthType
-
- FULL_WIDTH - Static variable in class nxopen.features.sheetmetal.SheetmetalManagerFlangeWidthOption
-
full width
- fullCircle() - Method in interface nxopen.annotations.CircleCenterlineBuilder
-
Returns the method which returns full or partial circle flag
License requirements: None.
- fullCircle() - Method in interface nxopen.geometricutilities.CurveLimitsData
-
Returns the full circle
License requirements: None.
- fullCutcomOutput - Variable in class nxopen.uf.UFPath.Cutcom
-
- fullCycle - Variable in class nxopen.cae.Post.Animation
-
- fullCycle - Variable in class nxopen.cae.Post.AnimationParameters
-
- fullDescription - Variable in class nxopen.RuleManager.FunctionInformation
-
Full description of function
- fullfillment() - Method in interface nxopen.diagramming.NodeBuilder
-
Returns the flag that indicates if the node is a fulfillment object.
- fullness() - Method in interface nxopen.features.BlendCornerBuilder
-
Returns the fullness value.
- fullness() - Method in interface nxopen.features.FillHoleBuilder
-
Returns the fullness
License requirements: None.
- FULLNESS - Static variable in class nxopen.features.FillHoleBuilder.ShapeControlTypes
-
- fullnessPoint() - Method in interface nxopen.features.FillHoleBuilder
-
Returns the point at corner A.
- fullNumChars - Variable in class nxopen.uf.UFDrf.DraftAidText
-
- fullPath() - Method in interface nxopen.ame.TiaProjectItemBuilder
-
Returns the project item full path (project folder path plus project file name with extension)
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- fullPath() - Method in interface nxopen.BasePart
-
Returns the full path of the part.
- fullPathForAssociatedCadPart() - Method in interface nxopen.cae.BaseFemPart
-
Returns the full pathname of the associated cad part
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- fullSceneAntialiasing() - Method in interface nxopen.preferences.SessionVisualizationVisual
-
Returns the scene antialiasing flag.
- fullspec - Variable in class nxopen.uf.UFUgmgr.PartFileObject
-
- fullString - Variable in class nxopen.uf.UFDrf.DraftAidText
-
- FULLY_CONTROLLED_TEXT - Static variable in class nxopen.uf.UFDrf.CustomSymbolTextType
-
- FULLY_FIXED - Static variable in class nxopen.SketchConstraintBuilder.Constraint
-
- FULLY_LOAD - Static variable in class nxopen.LoadOptions.LoadOption
-
partial load : off, use lightweight : off
- FULLY_LOAD_LIGHTWEIGHT_DISPLAY - Static variable in class nxopen.LoadOptions.LoadOption
-
partial load : off, use lightweight : on
- FULLY_SHADED - Static variable in class nxopen.preferences.ShadingRenderingStyleOption
-
Fully shaded
- FULLY_SHADED - Static variable in class nxopen.preferences.ViewVisualizationVisual.DisplayModeType
-
Deprecated.
Shading is applicable to all objects in view
- FULLY_SHADED - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.ViewMode
-
The view is fully shaded
- fullyDefinedColor() - Method in interface nxopen.preferences.PartSketch
-
Returns the sketch fully defined constraint color
License requirements: None.
- FUNC - Static variable in class nxopen.motion.PlantOutputBuilder.Poutype
-
funtion type
- FUNC_ABSOLUTE_FRAME - Static variable in class nxopen.uf.UFMotion.FuncRefFrameType
-
- FUNC_ACCELERATION - Static variable in class nxopen.uf.UFMotion.FuncResultType
-
- FUNC_ANGULAR_MAG - Static variable in class nxopen.uf.UFMotion.FuncComponentType
-
- FUNC_DISPLACEMENT - Static variable in class nxopen.uf.UFMotion.FuncResultType
-
- FUNC_EULER1COMP - Static variable in class nxopen.uf.UFMotion.FuncComponentType
-
- FUNC_EULER2COMP - Static variable in class nxopen.uf.UFMotion.FuncComponentType
-
- FUNC_EULER3COMP - Static variable in class nxopen.uf.UFMotion.FuncComponentType
-
- FUNC_FORCE - Static variable in class nxopen.uf.UFMotion.FuncResultType
-
- FUNC_LINEAR_MAG - Static variable in class nxopen.uf.UFMotion.FuncComponentType
-
- FUNC_RELATIVE_FRAME - Static variable in class nxopen.uf.UFMotion.FuncRefFrameType
-
- FUNC_VELOCITY - Static variable in class nxopen.uf.UFMotion.FuncResultType
-
- FUNC_XCOMP - Static variable in class nxopen.uf.UFMotion.FuncComponentType
-
- FUNC_YCOMP - Static variable in class nxopen.uf.UFMotion.FuncComponentType
-
- FUNC_ZCOMP - Static variable in class nxopen.uf.UFMotion.FuncComponentType
-
- FUNCTION - Static variable in class nxopen.ame.AmeDebugSession.NavigatorType
-
Function Aspect Navigator
- function() - Method in interface nxopen.ame.AspectPrefixBuilder
-
Returns the aspect prefix of function aspect
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- FUNCTION - Static variable in class nxopen.ame.BaseEvaluatorBuilder.ContextType
-
- FUNCTION - Static variable in class nxopen.ame.db.DocumentStructure.Attribute
-
- function() - Method in interface nxopen.ame.DefineAspectBuilder
-
Returns the value for Function Aspect
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- function() - Method in interface nxopen.cae.DurabilityFunctionExcitationBuilder
-
Returns the function.
- FUNCTION - Static variable in class nxopen.cae.DurabilityStaticEventBuilder.ExcitationTypeEnum
-
Function
- Function - Interface in nxopen.cae
-
Represents a function object
To create or edit an instance of this class, use
FunctionBuilder
Created in NX5.0.0
- function() - Method in interface nxopen.cae.LaminateRandomEventBuilder
-
- function() - Method in interface nxopen.cae.responsesimulation.FunctionComponentData
-
Returns the function to be applied
License requirements: nx_response_anlys ("NX Response Analysis")
.
- FUNCTION - Static variable in class nxopen.cae.XyFunctionUnitSystem
-
Function unit
- FUNCTION - Static variable in class nxopen.cae.xyplot.UnitSystem
-
Deprecated.
Function unit
- function() - Method in interface nxopen.geometricutilities.LawBuilder
-
Returns the function.
- FUNCTION - Static variable in class nxopen.mechatronics.SystemRoot.Type
-
Function
- FUNCTION - Static variable in class nxopen.motion.AnalyticalContactPropertyBuilder.DampingType
-
- FUNCTION - Static variable in class nxopen.motion.AnalyticalContactPropertyBuilder.FrictionCoefficientType
-
- FUNCTION - Static variable in class nxopen.motion.AnalyticalContactPropertyBuilder.StiffnessType
-
- function() - Method in interface nxopen.motion.DriverOperation
-
Returns the function
License requirements: None.
- FUNCTION - Static variable in class nxopen.motion.DriverOperation.Type
-
Function
- function() - Method in interface nxopen.motion.ExpressionFunctionBuilder
-
Returns the Function.
- FUNCTION - Static variable in class nxopen.motion.ExpressionFunctionBuilder.Type
-
- FUNCTION - Static variable in class nxopen.motion.ForceValueTypes
-
function type use function define force magnitude
- FUNCTION - Static variable in class nxopen.motion.LinkCouplerBuilder.CurveChoices
-
Function
- FUNCTION - Static variable in class nxopen.motion.LinkCouplerCoupleBuilder.ScaleChoices
-
Function
- function() - Method in interface nxopen.motion.PlantOutputBuilder
-
Returns the function
License requirements: nx_motion_cosim ("NX Motion CoSimulation")
.
- FUNCTION - Static variable in class nxopen.motion.RoadBuilder.SplineDatatypeChoices
-
Function
- function() - Method in interface nxopen.motion.ScalarForceBuilder
-
Returns the function
License requirements: None.
- function() - Method in interface nxopen.motion.ScalarTorqueBuilder
-
Returns the function
License requirements: None.
- FUNCTION - Static variable in class nxopen.motion.SegmentBuilder.SplineDatatypeChoices
-
Function
- FUNCTION - Static variable in class nxopen.motion.TirePropertyAdvancedParameters.ContactType
-
- FUNCTION - Static variable in class nxopen.motion.TirePropertyAdvancedParameters.FrictType
-
- FUNCTION - Static variable in class nxopen.motion.TirePropertyCdBuilder.AmbientTempType
-
- FUNCTION - Static variable in class nxopen.motion.TirePropertyCdBuilder.InflationPressureType
-
- FUNCTION - Static variable in class nxopen.motion.TirePropertyHighOrderParameters.UnloadingVertStiffType
-
- Function() - Constructor for class nxopen.uf.UFMotion.Function
-
- Function(String, String[], int) - Constructor for class nxopen.uf.UFMotion.Function
-
- function - Variable in class nxopen.uf.UFMotion.JointMotionInput
-
- Function.InterpolationMethod - Class in nxopen.cae
-
Defines interpolation method for table function to calculate data as input for solver
- Function.Type - Class in nxopen.cae
-
Defines function type
- FUNCTION1 - Static variable in class nxopen.features.GlobalShapingBuilder.TransitionType
-
Tangent continuous transition
- FUNCTION2 - Static variable in class nxopen.features.GlobalShapingBuilder.TransitionType
-
Position continuous transition
- FUNCTION_BLOCKS - Static variable in class nxopen.ame.PlcSymbolsEvaluatorBuilder.FilterType
-
- FUNCTION_INPUT - Static variable in class nxopen.uf.UFMotion.JointMotionInputType
-
- FUNCTION_NAME - Static variable in class nxopen.cae.xyplot.ModelType
-
- FUNCTION_RESPONSE - Static variable in class nxopen.cae.responsesimulation.RSEvent.ResultFileType
-
Result file to contain function response evaluation results, which extenstion is ".afu"
- FUNCTIONAL - Static variable in class nxopen.cam.InspectionMethodBuilder.LimitsOfSizeTypes
-
Functional
- FunctionArgumentsInformation() - Constructor for class nxopen.RuleManager.FunctionArgumentsInformation
-
- FunctionArgumentsInformation(String, String, String, String, String, String, String) - Constructor for class nxopen.RuleManager.FunctionArgumentsInformation
-
Constructor for the FunctionArgumentsInformation object.
- functionAspect() - Method in interface nxopen.ame.ReportsSettingsBuilder
-
Returns the function aspect
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- FunctionBuilder - Interface in nxopen.cae
-
This builder class is used to create or edit
Function
objects.
- FunctionBuilder.MathPlotData - Class in nxopen.cae
-
- FunctionBuilder.TableData - Class in nxopen.cae
-
- FunctionBuilder.TypesData - Class in nxopen.cae
-
- FunctionBuilder.UnitsData - Class in nxopen.cae
-
- FunctionCallInstanceBuilder - Interface in nxopen.ame
-
- FunctionCollection - Interface in nxopen.cae
-
Represents a collection of function objects
To obtain an instance of this class, refer to
BasePart
Created in NX5.0.0
- FunctionComponentData - Interface in nxopen.cae.responsesimulation
-
- functionComponentRx() - Method in interface nxopen.cae.responsesimulation.RotationalNodalFunctionExcitationBuilder
-
Returns the function component of Rx direction
License requirements: nx_response_anlys ("NX Response Analysis")
.
- functionComponentRy() - Method in interface nxopen.cae.responsesimulation.RotationalNodalFunctionExcitationBuilder
-
Returns the function component of Ry direction
License requirements: nx_response_anlys ("NX Response Analysis")
.
- functionComponentRz() - Method in interface nxopen.cae.responsesimulation.RotationalNodalFunctionExcitationBuilder
-
Returns the function component of Rz direction
License requirements: nx_response_anlys ("NX Response Analysis")
.
- functionComponentX() - Method in interface nxopen.cae.responsesimulation.TranslationalNodalFunctionExcitationBuilder
-
Returns the function component of X direction
License requirements: nx_response_anlys ("NX Response Analysis")
.
- functionComponentY() - Method in interface nxopen.cae.responsesimulation.TranslationalNodalFunctionExcitationBuilder
-
Returns the function component of Y direction
License requirements: nx_response_anlys ("NX Response Analysis")
.
- functionComponentZ() - Method in interface nxopen.cae.responsesimulation.TranslationalNodalFunctionExcitationBuilder
-
Returns the function component of Z direction
License requirements: nx_response_anlys ("NX Response Analysis")
.
- FUNCTIONCURVE_CONTROL_INPUT - Static variable in class nxopen.motion.TextBasedElementBuilder.TypeChoices
-
- functionDataType() - Method in interface nxopen.cae.AfuData
-
Returns the data type of the AFU Data Record
License requirements: None.
- functionDesignation() - Method in interface nxopen.ame.DefineAspectBuilder
-
Returns the value for Function Aspect
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- FunctionEvaluationOutputSettings - Interface in nxopen.cae.responsesimulation
-
Represents the output setting for function response evaluation .
- FunctionEvaluationSetting - Interface in nxopen.cae.responsesimulation
-
Represents the abstract class of evaluation setting for function response evaluation
This is an abstract class, and cannot be created.
- FunctionEvaluationSettingBuilder - Interface in nxopen.cae.responsesimulation
-
Represents the abstract builder class of evaluation setting for function response evaluation
This is an abstract class, and cannot be created.
- FunctionInformation() - Constructor for class nxopen.RuleManager.FunctionInformation
-
- FunctionInformation(String, int, String, String, String, boolean, boolean, String) - Constructor for class nxopen.RuleManager.FunctionInformation
-
Constructor for the FunctionInformation object.
- functionItemRevisionId() - Method in interface nxopen.mechatronics.FunctionObjectBuilder
-
- functionName() - Method in interface nxopen.report.ProgramInformation
-
Returns the program entry function name.
- FunctionObject - Interface in nxopen.mechatronics
-
Represents the Function object.
- FunctionObjectBuilder - Interface in nxopen.mechatronics
-
- FunctionObjectBuilder.ParameterData - Class in nxopen.mechatronics
-
Defined Parameter Data Structure
- FunctionObjectBuilder.RequirementData - Class in nxopen.mechatronics
-
Defined Requirement Data Structure
- FunctionObjectCollection - Interface in nxopen.mechatronics
-
- functionObjectCollection() - Method in interface nxopen.mechatronics.MechatronicsManager
-
Returns the FunctionObjectCollection instance belonging to this part .
- functionOptionSet() - Method in interface nxopen.mechatronics.FunctionObjectBuilder
-
Returns the option set
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- FUNCTIONS - Static variable in class nxopen.ame.PlcSymbolsEvaluatorBuilder.FilterType
-
- functions() - Method in interface nxopen.BasePart
-
Returns the CAE.FunctionCollection for this part
Created in NX5.0.0
- functionTags - Variable in class nxopen.uf.UFMotion.FindAllFunctionsData
-
- functionType - Variable in class nxopen.cae.ftk.OptionSetting.RecordOptionData
-
Usage type of AFU Data Record used
- functionType - Variable in class nxopen.cae.FunctionBuilder.TypesData
-
Math function or Table function
- functionType - Variable in class nxopen.uf.UFSf.AskLvNxData
-
- FUTABA - Static variable in class nxopen.tooling.DieBaseBuilder.CatalogOpt
-
catalog for FUTABA
- FW - Static variable in class nxopen.features.shipdesign.SectionViewBuilder.DirectionOptions
-
- FWD_PORT_IN_UP - Static variable in class nxopen.features.shipdesign.ThicknessDirectionBuilder.ThicknessDirectionType
-
Direction is Forward, Port, Inside or Up.
- FWD_PORT_TO_IN_CTR - Static variable in class nxopen.features.shipdesign.PlateSystemBuilder.StiffenerDirectionType
-
Direction is Forward, Port, To Reference, Inside or Centered.
- FWD_PORT_TO_IN_UP - Static variable in class nxopen.features.shipdesign.PlateSystemBuilder.StiffenerDirectionType
-
Direction is Forward, Port, To Reference, Inside or Up.
- FXX - Static variable in class nxopen.cae.responsesimulation.DirectionDataComponent
-
- FXY - Static variable in class nxopen.cae.responsesimulation.DirectionDataComponent
-
- FYY - Static variable in class nxopen.cae.responsesimulation.DirectionDataComponent
-
- FZZ - Static variable in class nxopen.cae.responsesimulation.DirectionDataComponent
-