nxopen.mechatronics

Interface CylindricalJointBuilder

All Superinterfaces:

Builder, IComponentBuilder, PhysicsJointBuilder, Remote, TaggedObject

public interface CylindricalJointBuilder
extends PhysicsJointBuilder

Represents a CylindricalJoint builder.
To create a new instance of this class, use CylindricalJointCollection.createCylindricalJointBuilder(nxopen.mechatronics.CylindricalJoint)

Created in NX7.5.1

Method Summary

Modifier and Type	Method and Description
Point	anchorPoint() Returns the anchor point.
Expression	angularLowerLimit() Returns the angular lower limit.
Expression	angularUpperLimit() Returns the angular upper limit.
Direction	axisVector() Returns the axis vector.
boolean	enableAngularLowerLimit() Returns the angular lower limit option.
boolean	enableAngularUpperLimit() Returns the angular upper limit option.
boolean	enableLinearLowerLimit() Returns the linear lower limit option.If the enable is true, then this joint will be applied the lower limit in linear direction.
boolean	enableLinearUpperLimit() Returns the linear upper limit option.
Expression	linearLowerLimit() Returns the linear lower limit.
Expression	linearUpperLimit() Returns the linear upper limit.
Expression	offset() Returns the offset value.
void	setAnchorPoint(Point anchorPoint) License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER") .
void	setAxisVector(Direction axisVector) License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER") .
void	setEnableAngularLowerLimit(boolean enable) License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER") .
void	setEnableAngularUpperLimit(boolean enable) License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER") .
void	setEnableLinearLowerLimit(boolean enable) License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER") .
void	setEnableLinearUpperLimit(boolean enable) License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER") .
Expression	startAngle() Returns the start angle.

Methods inherited from interface nxopen.mechatronics.PhysicsJointBuilder

attachment, base, baseAnchorPoint, baseAxisVector, name, positioning, setAttachment, setBase, setBaseAnchorPoint, setBaseAxisVector, setName, setPositioning

Methods inherited from interface nxopen.Builder

commit, destroy, getCommittedObjects, getObject, showResults

Methods inherited from interface nxopen.TaggedObject

printTestData, printTestData, tag, tagValue

Methods inherited from interface nxopen.geometricutilities.IComponentBuilder

validate

Method Detail

axisVector

Direction axisVector()
              throws NXException,
                     RemoteException

Returns the axis vector.
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")

Created in NX7.5.1

Throws:

NXException

RemoteException

setAxisVector

void setAxisVector(Direction axisVector)
            throws NXException,
                   RemoteException

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
Created in NX7.5.1

Parameters:

axisVector -

Throws:

NXException

RemoteException

anchorPoint

Point anchorPoint()
           throws NXException,
                  RemoteException

Returns the anchor point.
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")

Created in NX7.5.1

Throws:

NXException

RemoteException

setAnchorPoint

void setAnchorPoint(Point anchorPoint)
             throws NXException,
                    RemoteException

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
Created in NX7.5.1

Parameters:

anchorPoint -

Throws:

NXException

RemoteException

startAngle

Expression startAngle()
               throws NXException,
                      RemoteException

Returns the start angle.
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")

Created in NX7.5.1

Throws:

NXException

RemoteException

offset

Expression offset()
           throws NXException,
                  RemoteException

Returns the offset value.
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")

Created in NX7.5.1

Throws:

NXException

RemoteException

enableLinearUpperLimit

boolean enableLinearUpperLimit()
                        throws NXException,
                               RemoteException

Returns the linear upper limit option. If the enable is true, then this joint will be applied the upper limit in linear direction.
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")

Created in NX10.0.0

Throws:

NXException

RemoteException

setEnableLinearUpperLimit

void setEnableLinearUpperLimit(boolean enable)
                        throws NXException,
                               RemoteException

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
Created in NX10.0.0

Parameters:

enable -

Throws:

NXException

RemoteException

enableLinearLowerLimit

boolean enableLinearLowerLimit()
                        throws NXException,
                               RemoteException

Returns the linear lower limit option.If the enable is true, then this joint will be applied the lower limit in linear direction.
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")

Created in NX10.0.0

Throws:

NXException

RemoteException

setEnableLinearLowerLimit

void setEnableLinearLowerLimit(boolean enable)
                        throws NXException,
                               RemoteException

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
Created in NX10.0.0

Parameters:

enable -

Throws:

NXException

RemoteException

linearUpperLimit

Expression linearUpperLimit()
                     throws NXException,
                            RemoteException

Returns the linear upper limit. The upper limit setup for joint linear movement.
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")

Created in NX10.0.0

Throws:

NXException

RemoteException

linearLowerLimit

Expression linearLowerLimit()
                     throws NXException,
                            RemoteException

Returns the linear lower limit. The lower limit setup for joint linear movement.
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")

Created in NX10.0.0

Throws:

NXException

RemoteException

enableAngularUpperLimit

boolean enableAngularUpperLimit()
                         throws NXException,
                                RemoteException

Returns the angular upper limit option. If the enable is true, then this joint will be applied the upper limit in angular direction.
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")

Created in NX10.0.0

Throws:

NXException

RemoteException

setEnableAngularUpperLimit

void setEnableAngularUpperLimit(boolean enable)
                         throws NXException,
                                RemoteException

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
Created in NX10.0.0

Parameters:

enable -

Throws:

NXException

RemoteException

enableAngularLowerLimit

boolean enableAngularLowerLimit()
                         throws NXException,
                                RemoteException

Returns the angular lower limit option. If the enable is true, then this joint will be applied the lower limit in angular direction.
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")

Created in NX10.0.0

Throws:

NXException

RemoteException

setEnableAngularLowerLimit

void setEnableAngularLowerLimit(boolean enable)
                         throws NXException,
                                RemoteException

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
Created in NX10.0.0

Parameters:

enable -

Throws:

NXException

RemoteException

angularUpperLimit

Expression angularUpperLimit()
                      throws NXException,
                             RemoteException

Returns the angular upper limit. The upper limit setup for joint angular movement.
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")

Created in NX10.0.0

Throws:

NXException

RemoteException

angularLowerLimit

Expression angularLowerLimit()
                      throws NXException,
                             RemoteException

Returns the angular lower limit. The lower limit setup for joint angular movement.
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")

Created in NX10.0.0

Throws:

NXException

RemoteException