| Interface | Description |
|---|---|
| AdaptiveShell |
Represents a adaptive shell feature
To create or edit an instance of this class, use AdaptiveShellBuilder Created in NX6.0.0 |
| AdaptiveShellBuilder |
Represents a
AdaptiveShell builder To create a new instance of this class, use FeatureCollection.createAdaptiveShellBuilder(nxopen.features.AdaptiveShell) Default values. |
| AddendumSection |
Represents an Addendum Section feature
To create or edit an instance of this class, use AddendumSectionBuilder Created in NX7.5.0 |
| AddendumSurface |
Represents an Addendum Surface feature
To create or edit an instance of this class, use AddSurfBuilder Created in NX6.0.0 |
| AdmMoveFace |
Represents a ADM Move Face feature
To create or edit an instance of this class, use AdmMoveFaceBuilder Created in NX6.0.0 |
| AdmMoveFaceBuilder |
Represents a
AdmMoveFace builder
To create a new instance of this class, use FeatureCollection.createAdmMoveFaceBuilder(nxopen.features.AdmMoveFace) Default values. |
| AdmOffsetRegion |
Represents a linear dimension feature
To create or edit an instance of this class, use AdmOffsetRegionBuilder Created in NX6.0.0 |
| AdmOffsetRegionBuilder |
Represents a
AdmOffsetRegion builder
To create a new instance of this class, use FeatureCollection.createAdmOffsetRegionBuilder(nxopen.features.AdmOffsetRegion) Default values. |
| AdmResizeFace |
Represents an ADM resize face feature
To create or edit an instance of this class, use AdmResizeFaceBuilder Created in NX6.0.0 |
| AdmResizeFaceBuilder |
Represents a builder for a resize face feature.
|
| AeroCollection |
This class contains the factory method for creating aero design feature builder.
|
| AeroFlange |
Represents a flange feature
To create or edit an instance of this class, use AeroFlangeBuilder Created in NX10.0.0 |
| AeroFlangeBuilder |
Represents a
AeroFlange builder
To create a new instance of this class, use AeroCollection.createAeroFlangeBuilder(nxopen.features.AeroFlange) Default values. |
| AeroRib |
Represents a aero rib feature
To create or edit an instance of this class, use AeroRibBuilder Created in NX10.0.0 |
| AeroRibBuilder |
Represents a
AeroRib builder
To create a new instance of this class, use AeroCollection.createAeroRibBuilder(nxopen.features.AeroRib) Default values. |
| AestheticFaceBlend |
Represents an aesthetic face blend feature
To create or edit an instance of this class, use AestheticFaceBlendBuilder Created in NX7.5.0 |
| AestheticFaceBlendBuilder |
This class will provide ability to create aesthetically pleasing blend surfaces on sheet and solid bodies.
|
| AnalyzePocket |
Represents a analyze pocket feature.
|
| AnalyzePocketBuilder |
Represents a
AnalyzePocket builder for Analyze Pocket feature. |
| AngularDim |
Represents a angular dimension feature
To create or edit an instance of this class, use AngularDimBuilder Created in NX6.0.0 |
| AngularDimBuilder |
Represents a
AngularDim builder
To create a new instance of this class, use FeatureCollection.createAngularDimensionBuilder(nxopen.features.AngularDim) Created in NX6.0.0 |
| AOCS |
Represents a Offset In Face feature (aka Associative Offset Curve on Surface )
To create or edit an instance of this class, use AOCSBuilder Created in NX4.0.0 |
| AOCSBuilder |
Represents a Offset In Face(aka Associative offset curve on face)feature builder.
|
| AssemblyCut |
Represents an assembly cut feature.
|
| AssemblyCutBuilder |
Represents a
AssemblyCut builder. |
| AssociativeArc |
Represents a associative arc feature
To create or edit an instance of this class, use AssociativeArcBuilder Created in NX5.0.0 |
| AssociativeArcBuilder |
Represents a
AssociativeArc builder To create a new instance of this class, use BaseFeatureCollection.createAssociativeArcBuilder(nxopen.features.AssociativeArc) Default values. |
| AssociativeLine |
Represents a associative line feature
To create or edit an instance of this class, use AssociativeLineBuilder Created in NX5.0.0 |
| AssociativeLineBuilder |
Represents a
AssociativeLine builder
To create a new instance of this class, use BaseFeatureCollection.createAssociativeLineBuilder(nxopen.features.AssociativeLine) Default values. |
| AutomotiveCollection |
This class contains the factory method for creating automotive feature builder.
|
| BaseFeatureCollection | |
| Bead |
Represents a Bead feature
To create or edit an instance of this class, use BeadBuilder Created in NX5.0.0 |
| Bend |
Represents a Bend feature
To create or edit an instance of this class, use BendBuilder Created in NX5.0.0 |
| BendTaper |
Represents a bend taper feature
To create or edit an instance of this class, use BendTaperBuilder Created in NX6.0.0 |
| BlendCorner |
Represents a blend corner feature
To create or edit an instance of this class, use BlendCornerBuilder Created in NX9.0.0 |
| BlendCornerBuilder |
Represents a
BlendCorner builder. |
| BlendPocket |
Represents a blend pocket feature.
|
| BlendPocketBuilder |
Represents a
BlendPocket builder for Blend Pocket feature. |
| Block |
Represents a block feature.
|
| BlockFeatureBuilder |
Represents a block feature builder.
|
| BodyByEquation |
Represents a body by equation feature.
|
| BodyByEquationBuilder |
Represents a
BodyByEquation builder. |
| BodyFeature |
Represents a feature on a part that has a body associated with it.
|
| BooleanBuilder |
Represents a boolean feature builder.
|
| BooleanFeature |
Represents a boolean feature.
|
| BoundedPlane |
Represents a bounded plane feature
To create or edit an instance of this class, use BoundedPlaneBuilder Created in NX6.0.0 |
| BoundedPlaneBuilder |
Represents a
BoundedPlane builder
To create a new instance of this class, use FeatureCollection.createBoundedPlaneBuilder(nxopen.features.BoundedPlane) Created in NX6.0.0 |
| BreakCorner |
Represents a BreakCorner feature
To create or edit an instance of this class, use BreakCornerBuilder Created in NX5.0.0 |
| Brep |
Represents an unparameterized feature
An unparameterized feature is obtained from an existing feature. |
| BridgeCurve |
Represents a bridge curve feature
To create or edit an instance of this class, use BridgeCurveBuilderEx Created in NX5.0.0 |
| BridgeCurveBuilder | Deprecated
Deprecated in NX8.5.0.
|
| BridgeCurveBuilderEx |
Represents a
BridgeCurve builder. |
| BridgeSurface |
Represents a bridge surface feature
To create or edit an instance of this class, use BridgeSurfaceBuilder Created in NX8.0.0 |
| BridgeSurfaceBuilder |
Represents a
BridgeSurface builder
To create a new instance of this class, use FeatureCollection.createBridgeSurfaceBuilder(nxopen.features.BridgeSurface) Default values. |
| BridgeTransition |
Represents a bridge transition feature
To create or edit an instance of this class, use BridgeTransitionBuilder Created in NX5.0.2 |
| Chamfer |
Represents a chamfer feature.
|
| ChamferBuilder |
Represents the chamfer builder data.
|
| ChangeShellThickness |
Represents a shell face feature
To create or edit an instance of this class, use ChangeShellThicknessBuilder Created in NX6.0.0 |
| ChangeShellThicknessBuilder |
Represents a
ChangeShellThickness builder To create a new instance of this class, use FeatureCollection.createChangeShellThicknessBuilder(nxopen.features.ChangeShellThickness) Default values. |
| CircularBlendCurve |
Represents a Circular Blend Curve feature
To create or edit an instance of this class, use CircularBlendCurveBuilder Created in NX5.0.0 |
| CircularBlendCurveBuilder |
Represents a
CircularBlendCurve builder
To create a new instance of this class, use FeatureCollection.createCircularBlendCurveBuilder(nxopen.features.CircularBlendCurve) Default values. |
| ClosedCorner |
Represents a ClosedCorner feature
To create or edit an instance of this class, use ClosedCornerBuilder Created in NX5.0.0 |
| Coaxial |
Represents a coaxial feature
To create or edit an instance of this class, use CoaxialBuilder Created in NX6.0.0 |
| CoaxialBuilder |
Represents a
Coaxial builder
To create a new instance of this class, use FeatureCollection.createCoaxialBuilder(nxopen.features.Coaxial) Default values. |
| ColorFaceBuilder |
Represents a
ColorFaceBuilder
To create a new instance of this class, use FeatureCollection.createColorFaceBuilder() Created in NX7.0.0 |
| ColorFeatureBuilder |
Represents a
ColorFeatureBuilder
Represents a color feature builder. |
| ColorFeatureGroupBuilder |
Represents a
ColorFeatureGroupBuilder
Represents a color feature group builder. |
| CombineBodyFeature |
Represents a boolean feature.
|
| CombinedProjection |
Represents a combined projection feature
To create or edit an instance of this class, use CombinedProjectionBuilder Created in NX6.0.0 |
| CombinedProjectionBuilder |
Represents a
CombinedProjection builder
To create a new instance of this class, use FeatureCollection.createCombinedProjectionBuilder(nxopen.features.CombinedProjection) Default values. |
| CombineSheets |
Represents a combine sheets feature
To create or edit an instance of this class, use CombineSheetsBuilder Created in NX11.0.1 |
| CombineSheetsBuilder |
Represents a combine sheets builder.
|
| CompensateRoughData |
Represents a compensate rough curve or compensate rough sheet feature
To create or edit an instance of this class, use CompensateRoughDataBuilder Created in NX6.0.0 |
| CompositeCurve |
Represents a composite curve feature
To create or edit an instance of this class, use CompositeCurveBuilder Created in NX5.0.0 |
| CompositeCurveBuilder |
Represents a
CompositeCurve builder. |
| ConcaveFaces |
Represents a radius faces feature
To create or edit an instance of this class, use ConcaveFacesBuilder Created in NX7.5.0 |
| ConcaveFacesBuilder |
Represents a Concave Faces builder.
|
| Cone |
Represents a cone feature
To create or edit an instance of this class, use ConeBuilder Created in NX6.0.0 |
| ConeBuilder |
Represents a builder for a cone feature.
|
| ConstructionFeatureData |
Represents the data of a construction feature.
|
| ContourFlange |
Represents a Contour Flange feature
To create or edit an instance of this class, use ContourFlangeBuilder Created in NX5.0.0 |
| ConvertToSheetmetal |
Represents a ConvertToSheetmetal feature
To create or edit an instance of this class, use ConvertToSheetmetalBuilder Created in NX5.0.0 |
| Coplanar |
Represents a Coplanar feature
To create or edit an instance of this class, use CoplanarBuilder Created in NX6.0.0 |
| CoplanarBuilder |
Represents a
Coplanar builder
To create a new instance of this class, use FeatureCollection.createCoplanarBuilder(nxopen.features.Feature) Default values. |
| CopyFace |
Represents a copy face feature
To create or edit an instance of this class, use CopyFaceBuilder Created in NX6.0.0 |
| CopyFaceBuilder |
Represents a builder for a copy face feature.
|
| CopyPasteBuilder |
Represents a
CopyPasteBuilder
To create a new instance of this class, use FeatureCollection.createCopyPasteBuilder2(nxopen.NXObject[]) Created in NX6.0.0 |
| CurveFeature |
Represents a curve feature
This is an abstract class, and cannot be instantiated. |
| CurveFeatureCollection |
Manages curve features.
|
| CurveFinderBuilder |
Represents a collection of curves and their relationships to other curves in the model .
|
| CurveLength |
Represents a curve length feature.
|
| CurveLengthBuilder |
Represents the CurveLength builder
To create a new instance of this class, use FeatureCollection.createCurvelengthBuilder(nxopen.features.Feature) Default values. |
| CurveOnSurface |
Represents a curve on surface feature
To create or edit an instance of this class, use CurveOnSurfaceBuilder Created in NX5.0.0 |
| CurveOnSurfaceBuilder |
Curve On Surface builder class.
|
| CustomAttribute |
Represents a
CustomAttribute class
This is an abstract base class of all the types of attributes. |
| CustomAttributeCollection |
This class contains the factory method for creating custom attribute object.
|
| CustomDoubleArrayAttribute |
Represents a
CustomDoubleArrayAttribute class
An instance of this class can be obtained from CustomAttributeCollection.createCustomDoubleArrayAttribute(java.lang.String, nxopen.features.CustomAttribute.Property[]) Created in NX11.0.0 |
| CustomDoubleAttribute |
Represents a
CustomDoubleAttribute class
An instance of this class can be obtained from CustomAttributeCollection.createCustomDoubleAttribute(java.lang.String, nxopen.features.CustomAttribute.Property[]) Created in NX11.0.0 |
| CustomExpressionArrayAttribute |
Represents a
CustomExpressionArrayAttribute class
An instance of this class can be obtained from CustomAttributeCollection.createCustomExpressionArrayAttribute(java.lang.String, nxopen.features.CustomAttribute.Property[]) Created in NX11.0.0 |
| CustomExpressionAttribute |
Represents a
CustomExpressionAttribute class
An instance of this class can be obtained from CustomAttributeCollection.createCustomExpressionAttribute(java.lang.String, nxopen.features.CustomAttribute.Property[]) Created in NX11.0.0 |
| CustomFeature |
Represents a custom feature
To create or edit an instance of this class, use CustomFeatureBuilder Created in NX10.0.0 |
| CustomFeatureBuilder |
Represents a
CustomFeature builder
To create a new instance of this class, use FeatureCollection.createCustomFeatureBuilder(nxopen.features.Feature) Created in NX11.0.0 |
| CustomFeatureClass |
Provides interfaces to configure callbacks for a custom feature.
|
| CustomFeatureClass.CreateFeatureGeometryCallback |
Prototype for create feature geometry callbacks
|
| CustomFeatureClass.HighlightCallback |
Prototype for highlight callbacks
|
| CustomFeatureClass.InformationCallback |
Prototype for information callbacks
|
| CustomFeatureClass.InternalFeaturePreUpdateCallback |
Prototype for internal feature pre update callbacks
|
| CustomFeatureClass.ModifyFeatureGeometryCallback |
Prototype for modify feature geometry callbacks
|
| CustomFeatureClass.PostUpdateCallback |
Prototype for post update callbacks
|
| CustomFeatureClass.PreUpdateCallback |
Prototype for pre update callbacks
|
| CustomFeatureClassManager |
Provides interfaces to utilise custom feature functionality
To obtain an instance of this class, refer to Session Created in NX11.0.0 |
| CustomFeatureCreateFeatureGeometryEvent |
Represents the event data for a create geometry callback for a custom feature
Only create the geometry here and specify tracking.
|
| CustomFeatureData |
Represents the collection of attributes for a custom feature.
|
| CustomFeatureDataCollection |
This class contains the factory method for creating custom feature data object.
|
| CustomFeatureEvent |
Represents the event data for custom feature.
|
| CustomFeatureHighlightEvent |
Represents the event data for highlight callback for custom feature
This class cannot be created . |
| CustomFeatureInformationEvent |
Represents the event data for information callback for custom feature.
|
| CustomFeatureInternalFeaturePreUpdateEvent |
Represents the event data for pre-update callback for construction and output feature of custom feature.
|
| CustomFeatureModifyFeatureGeometryEvent |
Represents the event data for a modify geometry callback for a custom feature.
|
| CustomFeaturePostUpdateEvent |
Represents the event data for post-update callback for custom feature.
|
| CustomFeaturePreUpdateEvent |
Represents the event data for pre-update callback for custom feature.
|
| CustomFeatureSelectionFilter |
Represents a
CustomFeatureSelectionFilter class
An instance of this class can be obtained from CustomFeatureClassManager.createCustomFeatureSelectionFilter() Created in NX11.0.0 |
| CustomIntegerArrayAttribute |
Represents a
CustomIntegerArrayAttribute class
An instance of this class can be obtained from CustomAttributeCollection.createCustomIntegerArrayAttribute(java.lang.String, nxopen.features.CustomAttribute.Property[]) Created in NX11.0.0 |
| CustomIntegerAttribute |
Represents a
CustomIntegerAttribute class
An instance of this class can be obtained from CustomAttributeCollection.createCustomIntegerAttribute(java.lang.String, nxopen.features.CustomAttribute.Property[]) Created in NX11.0.0 |
| CustomLogicalArrayAttribute |
Represents a
CustomLogicalArrayAttribute class
An instance of this class can be obtained from CustomAttributeCollection.createCustomLogicalArrayAttribute(java.lang.String, nxopen.features.CustomAttribute.Property[]) Created in NX11.0.0 |
| CustomLogicalAttribute |
Represents a
CustomLogicalAttribute class
An instance of this class can be obtained from CustomAttributeCollection.createCustomLogicalAttribute(java.lang.String, nxopen.features.CustomAttribute.Property[]) Created in NX11.0.0 |
| CustomStringArrayAttribute |
Represents a
CustomStringArrayAttribute class
An instance of this class can be obtained from CustomAttributeCollection.createCustomStringArrayAttribute(java.lang.String, nxopen.features.CustomAttribute.Property[]) Created in NX11.0.0 |
| CustomStringAttribute |
Represents a
CustomStringAttribute class
An instance of this class can be obtained from CustomAttributeCollection.createCustomStringAttribute(java.lang.String, nxopen.features.CustomAttribute.Property[]) Created in NX11.0.0 |
| CustomTagArrayAttribute |
Represents a
CustomTagArrayAttribute class
An instance of this class can be obtained from CustomAttributeCollection.createCustomTagArrayAttribute(java.lang.String, nxopen.features.CustomAttribute.Property[]) Created in NX11.0.0 |
| CustomTagAttribute |
Represents a
CustomAttribute class
An instance of this class can be obtained from CustomAttributeCollection.createCustomTagAttribute(java.lang.String, nxopen.features.CustomAttribute.Property[]) Created in NX11.0.0 |
| CutFace |
Represents a cut face feature
To create or edit an instance of this class, use CutFaceBuilder Created in NX6.0.0 |
| CutFaceBuilder |
Represents a builder for a cut face feature.
|
| Cylinder |
Represents a cylinder feature
To create or edit an instance of this class, use CylinderBuilder Created in NX5.0.0 |
| CylinderBuilder |
Represents a
Cylinder builder
To create a new instance of this class, use FeatureCollection.createCylinderBuilder(nxopen.features.Feature) Default values. |
| DatumAxisBuilder |
Represents a datum axis feature builder.
|
| DatumAxisFeature |
Represents a datum axis feature
To create or edit an instance of this class, use DatumAxisBuilder Created in NX3.0.0 |
| DatumBuilder |
Represents a builder for datum features.
|
| DatumCsys |
Represents a Datum Coordinate System feature.
|
| DatumCsysBuilder |
Represents a datum csys builder
To create a new instance of this class, use FeatureCollection.createDatumCsysBuilder(nxopen.features.Feature) Created in NX4.0.0 |
| DatumFeature |
Represents a Datum feature that is positioned by a set of constraints.
|
| DatumPlaneBuilder |
Represents a datum plane feature builder.
|
| DatumPlaneFeature |
Represents a datum plane feature
To create or edit an instance of this class, use DatumPlaneBuilder Created in NX3.0.0 |
| DeformDefinitionBuilder |
Used as a place holder for selected member features, expressions and external references for a deform
definition feature record that is to be created.
|
| DeleteBody |
Represents a delete body feature.
|
| DeleteBodyBuilder |
Represents a
DeleteBody builder for Delete Body feature. |
| DeleteCurve |
Represents a delete curve feature
To create or edit an instance of this class, use DeleteCurveBuilder Created in NX9.0.0 |
| DeleteCurveBuilder |
Represents a
DeleteCurve builder
To create a new instance of this class, use SynchronousCurveCollection.createDeleteCurveBuilder(nxopen.features.DeleteCurve) Default values. |
| DeleteEdge |
Represents a delete edge feature
To create or edit an instance of this class, use DeleteEdgeBuilder Created in NX8.0.0 |
| DeleteEdgeBuilder |
Represents a builder for a delete edge feature.
|
| DeleteFace |
Represents a delete face feature , don't use it until nx502
To create or edit an instance of this class, use DeleteFaceBuilder Created in NX5.0.2 |
| DeleteFaceBuilder |
Represents a builder for a delete face feature, don't use it until nx502.
|
| DesignFeatureCollection |
Manages design features.
|
| DimensionBuilder |
Represents a
DimensionBuilder The sub-class should create an instance of corresponding object Default values. |
| Dimple |
Represents a Dimple feature
To create or edit an instance of this class, use DimpleBuilder Created in NX5.0.0 |
| DivideCurveBuilder |
Represents a builder for non-associative divide curve operation.
|
| Divideface |
Represents a Divideface feature.
|
| DividefaceBuilder |
Represents a divide face builder.
|
| Draft |
Represents a Draft feature.
|
| DraftBody |
Represents a draft body feature
To create or edit an instance of this class, use DraftBodyBuilder Created in NX5.0.0 |
| DraftBodyBuilder |
Represents a
DraftBody builder
To create a new instance of this class, use FeatureCollection.createDraftBodyBuilder(nxopen.features.Feature) Default values. |
| DraftBuilder |
Represents a Draft Feature Builder that creates or edits a draft (Old name Taper) feature.
|
| DraftingSplineBuilder |
Sketch Spline builder class.
|
| DrawDiePunch |
Represents a draw die punch feature.
|
| DrawnCutout |
Represents a DrawnCutout feature
To create or edit an instance of this class, use DrawnCutoutBuilder Created in NX5.0.0 |
| EdgeBlend |
Represents an Edge Blend feature
To create or edit an instance of this class, use EdgeBlendBuilder Created in NX5.0.0 |
| EdgeBlendBuilder |
Represents a Edge Blend builder.
|
| EdgeRip |
Represents an EdgeRip feature
To create or edit an instance of this class, use EdgeRipBuilder Created in NX5.0.0 |
| EdgeSymmetry |
Represents an edge symmetry feature
To create or edit an instance of this class, use EdgeSymmetryBuilder Created in NX7.0.0 |
| EdgeSymmetryBuilder |
Represents a
EdgeSymmetry builder
To create a new instance of this class, use FeatureCollection.createEdgeSymmetryBuilder(nxopen.features.Feature) Default values. |
| EditBend |
Represents a edit bend feature
To create or edit an instance of this class, use EditBendBuilder Created in NX7.5.0 |
| EditCrossSection |
Represents a edit cross section feature.
|
| EditCrossSectionBuilder |
Represents a
EditCrossSection builder
To create a new instance of this class, use FeatureCollection.createEditCrossSectionBuilder(nxopen.features.EditCrossSection) Default values. |
| EditDimensionBuilder |
Represents a builder of edit feature dimensions
To create a new instance of this class, use FeatureCollection.createEditDimensionBuilder() Default values. |
| EditWithRollbackManager |
Represents an object that stores transient data during Edit with Rollback of a feature.
|
| EmbeddedOperationBuilder |
Represents an EmbeddedOperationBuilder
This is an abstract class, and cannot be instantiated. |
| EmbedManagerBuilder |
Used to manage the interaction to Embed, Replace, Rename and Delete embedded
file information in the part file.
|
| Emboss |
Represents an emboss feature
To create or edit an instance of this class, use EmbossBuilder Created in NX4.0.0 |
| EmbossBody |
Represents an emboss body feature
To create or edit an instance of this class, use EmbossBodyBuilder Created in NX8.5.0 |
| EmbossBodyBuilder |
Represents a
EmbossBody builder
To create a new instance of this class, use FeatureCollection.createEmbossBodyBuilder(nxopen.features.EmbossBody) Default values. |
| EmbossBuilder |
Represents an emboss feature builder that creates or edits an emboss feature.
|
| EmbossJoggle |
Represents a joggle object.
|
| EmbossLimit |
Represents emboss start and end objects, meaning, targets and end-cap definitions.
|
| EmbossProjection |
Represents a projection object.
|
| EmbossRegion |
Represents an emboss region object.
|
| EmbossSidewall |
Represents an emboss sidewall object.
|
| EmbossTaper |
Represents a taper object.
|
| EmbossTarget |
Represents a target object.
|
| Enlarge |
Represents an enlarge feature
To create or edit an instance of this class, use EnlargeBuilder Created in NX6.0.0 |
| EnlargeBuilder |
Represents a
Enlarge builder. |
| ExtendSheet |
Represents an extend sheet feature
To create or edit an instance of this class, use ExtendSheetBuilder Created in NX9.0.0 |
| ExtendSheetBuilder |
Represents a
ExtendSheet builder
To create a new instance of this class, use TrimFeatureCollection.createExtendSheetBuilder(nxopen.features.ExtendSheet) Default values. |
| Extension |
Represents a extension feature
To create or edit an instance of this class, use ExtensionBuilder Created in NX8.0.0 |
| ExtensionBuilder |
Represents a
Extension builder
To create a new instance of this class, use FeatureCollection.createExtensionBuilder(nxopen.features.Extension) Default values. |
| ExtractFace |
Represents a Extract face feature
To create or edit an instance of this class, use ExtractFaceBuilder Created in NX5.0.0 |
| ExtractFaceBuilder |
Represents a
ExtractFace builder. |
| Extrude |
Represents an extrude feature.
|
| ExtrudeBuilder |
Represents a extrude feature builder.
|
| FaceBlend |
Represents a Face Blend feature.
|
| FaceBlendBuilder |
Represents a face blend builder.
|
| FaceRecognitionBuilder |
Represents a collection of faces and their relationships to other faces in the model .
|
| FaceSheet |
Represents a Face Sheet feature
To create or edit an instance of this class, use FaceSheetBuilder Created in NX5.0.0 |
| Feature |
Represents a feature on a part
This is an abstract class, and cannot be instantiated. |
| FeatureBuilder |
Represents a Feature Builder to be used in the creation and modification of features.
|
| FeatureCollection |
Represents a collection of features
To obtain an instance of this class, refer to BasePart Created in NX3.0.0 |
| FeatureGroup |
Represents a
FeatureGroup Not support KF. |
| FeatureList |
Represents a list of objects.
|
| FeatureReferencesBuilder | |
| FeatureReplayBuilder |
Represents a
FeatureReplayBuilder builder. |
| FillHole |
Represents a fill hole feature.
|
| FillHoleBuilder |
Represents a
FillHole builder
To create a new instance of this class, use FreeformSurfaceCollection.createFillHoleBuilder(nxopen.features.FillHole) Default values. |
| FitCurve |
Represents a fit curve feature
To create or edit an instance of this class, use FitCurveBuilder Created in NX8.5.0 |
| FitCurveBuilder |
Represents a
FitCurve builder
To create a new instance of this class, use FeatureCollection.createFitCurveBuilder(nxopen.features.FitCurve) Default values. |
| FitSurface |
Represents a fit surface feature
To create or edit an instance of this class, use FitSurfaceBuilder Created in NX8.5.0 |
| FitSurfaceBuilder |
This class will provide the ability to fit surfaces through facet bodies or point sets/groups.
|
| Fixed |
Represents a Fixed feature
To create or edit an instance of this class, use FixedBuilder Created in NX7.0.0 |
| FixedBuilder |
Represents a builder for a fixed feature.
|
| Flange |
Represents a Flange feature
To create or edit an instance of this class, use FlangeBuilder Created in NX5.0.0 |
| FlatPattern |
Represents a Flat Solid feature
To create or edit an instance of this class, use FlatPatternBuilder Created in NX5.0.1 |
| FlatSolid |
Represents a Flat Solid feature
To create or edit an instance of this class, use FlatSolidBuilder Created in NX5.0.0 |
| FlatteningAndForming |
Represents a flattening and forming feature
To create or edit an instance of this class, use FlatteningAndFormingBuilderEx Created in NX11.0.0 |
| FlatteningAndFormingBuilder |
This class will provide the solution to unwrap 3D non-planar, curved geometry to a 2D plane.
|
| FlatteningAndFormingBuilderEx |
This class will provide the solution to unwrap 3D non-planar, curved geometry to a 2D plane.
|
| FlexibleCable |
Represents a flexible cable
To create or edit an instance of this class, use FlexibleCableBuilder Created in NX7.5.0 |
| FlowBlend |
Represents a flow blend feature
To create or edit an instance of this class, use FlowBlendBuilder Created in NX10.0.0 |
| FlowBlendBuilder |
Represents a
FlowBlend builder
To create a new instance of this class, use FeatureCollection.createFlowBlendBuilder(nxopen.features.FlowBlend) Default values. |
| FreeformCurveCollection |
Collection of freeform curve based features.
|
| FreeformSurfaceCollection |
Collection of freeform surface based features.
|
| FreeTransformer |
Represents a free transformer feature
To create or edit an instance of this class, use FreeTransformerBuilder Created in NX10.0.0 |
| FreeTransformerBuilder |
Represents a
FreeTransformer builder
To create a new instance of this class, use FeatureCollection.createFreeTransformerBuilder(nxopen.features.Feature) Default values. |
| GeneralConic |
Represents a general conic feature
To create or edit an instance of this class, use GeneralConicBuilder Created in NX8.5.0 |
| GeneralConicBuilder |
Represents a
GeneralConic builder
To create a new instance of this class, use FeatureCollection.createGeneralConicBuilder(nxopen.features.GeneralConic) Default values. |
| GeodesicChamfer |
Represents a GeodesicChamfer feature.
|
| GeodesicChamferBuilder |
Represents a
GeodesicChamfer builder for GeodesicChamfer command. |
| GeodesicFillet |
Represents a GeodesicFillet feature.
|
| GeodesicFilletBuilder |
Represents a
GeodesicFillet builder for GeodesicFillet command. |
| GeodesicIntersect |
Represents a GeodesicIntersect feature.
|
| GeodesicIntersectBuilder |
Represents a
GeodesicIntersect builder for Intersect command. |
| GeodesicLine |
Represents a GeodesicLine feature.
|
| GeodesicLineBuilder |
Represents a
GeodesicLine builder for GeodesicLine command. |
| GeodesicOffset |
Represents a GeodesicOffset feature.
|
| GeodesicOffsetBuilder |
Represents a
GeodesicOffset builder for Offset command. |
| GeodesicPoint |
Represents a GeodesicPoint feature.
|
| GeodesicPointBuilder |
Represents a
GeodesicPoint builder for GeodesicPoint command. |
| GeodesicProject |
Represents a GeodesicProject feature.
|
| GeodesicProjectBuilder |
Represents a
GeodesicProject builder for Project command. |
| GeodesicResetBuilder |
Represents a
GeodesicResetBuilder To create a new instance of this class, use GeodesicSketchCollection.createGeodesicResetBuilder() Created in NX10.0.0 |
| GeodesicSketch |
Represents a GeodesicSketch feature.
|
| GeodesicSketchBuilder |
Represents a
GeodesicSketch builder for GeodesicSketch feature. |
| GeodesicSketchCollection |
Represents a collection of GeodesicSketch features
To obtain an instance of this class, refer to FeatureCollection Created in NX10.0.0 |
| GeodesicTrim |
Represents a GeodesicTrim feature.
|
| GeodesicTrimBuilder |
Represents a
GeodesicSketch builder for GeodesicTrim command. |
| Geomcopy |
Represents a geomcopy feature
To create or edit an instance of this class, use GeomcopyBuilder Created in NX5.0.0 |
| GeomcopyBuilder |
Represents a
Geomcopy builder
To create a new instance of this class, use FeatureCollection.createGeomcopyBuilder(nxopen.features.Feature) Default values. |
| GeometricConstraintData |
Represents Geometric Constraint Data class.
|
| GeometricConstraintDataManager |
Represents Geometric Constraint Data Manager class.
|
| GeometricConstraintDataSetManager |
Represents Geometric Constraint Data Set Manager class.
|
| GlobalShaping |
Represents a global shaping feature
To create or edit an instance of this class, use GlobalShapingBuilder Created in NX5.0.0 |
| GlobalShapingBuilder |
Represents a
GlobalShaping builder
To create a new instance of this class, use FeatureCollection.createGlobalShapingBuilder(nxopen.features.GlobalShaping) Default values. |
| GlobalShapingCurveOffsetBuilder |
The class used to define the curves and offset laws needed for the target curve list.
|
| GlobalShapingCurveOffsetBuilderList |
Represents a list of objects.
|
| GlobalShapingPointOffsetBuilder |
The class used to define the points and offsets needed for the target point list.
|
| GlobalShapingPointOffsetBuilderList |
Represents a list of objects.
|
| GroupFace |
Represents a group face feature
To create or edit an instance of this class, use GroupFaceBuilder Created in NX6.0.0 |
| GroupFaceBuilder |
Represents a builder for a group face feature.
|
| GuidedExtensionBuilderEx |
Represents a
GuidedExtensionEx builder
To create a new instance of this class, use FeatureCollection.createGuidedExtensionBuilderEx(nxopen.features.Feature) Default values. |
| GuidedExtensionEx |
Represents a guided extension feature
To create or edit an instance of this class, use GuidedExtensionBuilderEx Created in NX10.0.0 |
| Gusset |
Represents a gusset feature
To create or edit an instance of this class, use GussetBuilder Created in NX7.5.0 |
| Helix |
Represents a helix feature
To create or edit an instance of this class, use HelixBuilder Created in NX8.5.0 |
| HelixBuilder |
Represents a
Helix builder
To create a new instance of this class, use FeatureCollection.createHelixBuilder(nxopen.features.Helix) Default values. |
| HemFlange |
Represents a hem flange feature
To create or edit an instance of this class, use HemFlangeBuilder Created in NX5.0.0 |
| Hole |
Represents a Hole feature
To create or edit an instance of this class, use HoleFeatureBuilder Created in NX3.0.0 |
| HoleFeatureBuilder |
Represents a Hole feature builder.
|
| HolePackage |
Represents a hole package and hole series feature.
|
| HolePackageBuilder |
Represents a
HolePackage builder. |
| Human |
Represents a human feature.
|
| HumanBuilder |
Represents a human feature.
|
| IBoolean | Deprecated
Deprecated in NX4.0.0.
|
| IContainerFeature |
Represents a container feature on a part.
|
| IForm |
Represents a IForm feature
To create or edit an instance of this class, use IFormBuilder Created in NX7.5.0 |
| IFormBuilder |
Represents a
IForm builder. |
| IIsolateToolBodyOperation |
Represents a combine body feature.
|
| InstanceFeature |
Represents a instance feature
To create or edit an instance of this class, use InstanceFeatureBuilder Created in NX8.0.0 |
| InstanceFeatureBuilder |
instance feature builder
To create a new instance of this class, use FeatureCollection.createInstanceFeatureBuilder(nxopen.features.InstanceFeature) Default values. |
| Intersect | Deprecated
Deprecated in NX4.0.0.
|
| IntersectionCurve |
Represents a
IntersectionCurve . |
| IntersectionCurveBuilder |
Represents a
IntersectionCurveBuilder builder. |
| IsoclineCurve |
Represents a isocline curve feature
To create or edit an instance of this class, use IsoclineCurveBuilder Created in NX11.0.0 |
| IsoclineCurveBuilder |
Represents a
IsoclineCurve builder
To create a new instance of this class, use FreeformCurveCollection.createIsoclineCurveBuilder(nxopen.features.IsoclineCurve) Default values. |
| IsolateFeature |
Represents a Isolate Object of feature
To create or edit an instance of this class, use IsolateFeatureBuilder Created in NX8.5.0 |
| IsolateFeatureBuilder |
Represents a
IsolateFeature builder To create a new instance of this class, use FeatureCollection.createIsolateFeatureBuilder(nxopen.features.IsolateFeature) Created in NX8.5.0 |
| IsoparametricCurves |
Represents a isoparametric curves feature
To create or edit an instance of this class, use IsoparametricCurvesBuilder Created in NX8.0.0 |
| IsoparametricCurvesBuilder |
Represents a
IsoparametricCurves builder
To create a new instance of this class, use FeatureCollection.createIsoparametricCurvesBuilder(nxopen.features.IsoparametricCurves) Default values. |
| Jog |
Represents a Jog feature
To create or edit an instance of this class, use JogBuilder Created in NX5.0.0 |
| JoinCurves |
Represents a join curve feature
To create or edit an instance of this class, use JoinCurvesBuilder Created in NX5.0.0 |
| JoinCurvesBuilder |
Represents a
JoinCurves builder. |
| LabelChamfer |
Represents a label chamfer feature
To create or edit an instance of this class, use LabelChamferBuilder Created in NX7.0.0 |
| LabelChamferBuilder |
Represents a
LabelChamfer builder
To create a new instance of this class, use FeatureCollection.createLabelChamferBuilder(nxopen.features.LabelChamfer) Created in NX7.0.0 |
| LabelNotchBlend |
Represents a label notch blend feature
To create or edit an instance of this class, use LabelNotchBlendBuilder Created in NX8.0.0 |
| LabelNotchBlendBuilder |
Represents a
LabelNotchBlend builder
To create a new instance of this class, use FeatureCollection.createLabelNotchBlendBuilder(nxopen.features.LabelNotchBlend) Created in NX8.0.0 |
| Lattice |
Represents a lattice utility
To create or edit an instance of this class, use LatticeBuilder Created in NX11.0.2 |
| LatticeBuilder |
Represents a Features.Lattice builder
To create a new instance of this class, use LatticeFeatureCollection.createLatticeBuilder(nxopen.features.Lattice) Default values. |
| LatticeFeatureCollection |
Manages lattice features.
|
| LawCurve |
Represents a law curve feature
To create or edit an instance of this class, use LawCurveBuilder Created in NX7.5.1 |
| LawCurveBuilder |
Represents a
LawCurve builder
To create a new instance of this class, use FeatureCollection.createLawCurveBuilder(nxopen.features.LawCurve) Default values. |
| LawExtension |
Represents a law extension feature
To create or edit an instance of this class, use LawExtensionBuilder Created in NX6.0.0 |
| LawExtensionBuilder |
Represents a
LawExtension builder
To create a new instance of this class, use FeatureCollection.createLawExtensionBuilder(nxopen.features.LawExtension) Default values. |
| LawExtensionBuilderEx |
Represents a
LawExtensionEx builder
To create a new instance of this class, use FeatureCollection.createLawExtensionBuilderEx(nxopen.features.Feature) Default values. |
| LawExtensionEx |
Represents a law extension feature
To create or edit an instance of this class, use LawExtensionBuilderEx Created in NX8.5.0 |
| LinearDimension |
Represents a linear dimension feature
To create or edit an instance of this class, use LinearDimensionBuilder Created in NX6.0.0 |
| LinearDimensionBuilder |
Represents a
LinearDimension builder
To create a new instance of this class, use FeatureCollection.createLinearDimensionBuilder(nxopen.features.LinearDimension) Default values. |
| LinkedFacet |
Represents a linked facet feature
To create or edit an instance of this class, use LinkedFacetBuilder Created in NX6.0.0 |
| LinkedFacetBuilder |
Represents a
LinkedFacet builder
To create a new instance of this class, use FeatureCollection.createLinkedFacetBuilder(nxopen.features.LinkedFacet) Created in NX6.0.0 |
| LocalScaleCurve |
Represents a local scale curve feature
To create or edit an instance of this class, use LocalScaleCurveBuilder Created in NX11.0.0 |
| LocalScaleCurveBuilder |
Represents a
LocalScaleCurve builder
To create a new instance of this class, use SynchronousCurveCollection.createLocalScaleCurveBuilder(nxopen.features.LocalScaleCurve) Default values. |
| LoftedFlange |
Represents a Lofted Flange feature
To create or edit an instance of this class, use LoftedFlangeBuilder Created in NX5.0.0 |
| Louver |
Represents a Louver feature
To create or edit an instance of this class, use LouverBuilder Created in NX5.0.0 |
| MakeOffset |
Represents a make offset feature
To create or edit an instance of this class, use MakeOffsetBuilder Created in NX7.5.0 |
| MakeOffsetBuilder |
Represents a
MakeOffset builder
To create a new instance of this class, use FeatureCollection.createMakeOffsetBuilder(nxopen.features.MakeOffset) Default values. |
| MakeSolid |
Represents a make solid feature that converts closed sheet bodies to solid bodies.
|
| MakeSolidBuilder |
Represents a
MakeSolid builder. |
| Maple | Deprecated
Deprecated in NX12.0.0.
|
| MapleBuilder | Deprecated
Deprecated in NX12.0.0.
|
| MasterCut |
Represents a section view feature
To create or edit an instance of this class, use MasterCutBuilder Created in NX5.0.0 |
| MasterCutBuilder |
Represents a master cut feature builder that creates, inquires, or edits a master cut feature associated with a Cut View.
|
| MatchEdge |
Represents a match edge feature
To create or edit an instance of this class, use MatchEdgeBuilder Created in NX6.0.0 |
| MatchEdgeBuilder |
Represents a
MatchEdge builder
To create a new instance of this class, use FeatureCollection.createMatchEdgeBuilder(nxopen.features.MatchEdge) Default values. |
| MatchedReferenceBuilder | |
| MathIntegration |
Represents a math integration feature
To create or edit an instance of this class, use MathIntegrationBuilder Created in NX12.0.0 |
| MathIntegrationBuilder |
Represents a
MathIntegration builder
To create a new instance of this class, use FeatureCollection.createMathIntegrationBuilder(nxopen.features.MathIntegration) Default values. |
| MeshSurface |
Represents a mesh surface feature.
|
| MeshSurfaceBuilder |
Mesh Surface Builder class.
|
| MeshTransformer |
Represents a mesh transformer feature
To create or edit an instance of this class, use MeshTransformerBuilder Created in NX10.0.0 |
| MeshTransformerBuilder |
Represents a
MeshTransformer builder
To create a new instance of this class, use FeatureCollection.createMeshTransformerBuilder(nxopen.features.Feature) Default values. |
| Metaform |
Represents a metaform feature
To create or edit an instance of this class, use MetaformBuilder Created in NX7.5.0 |
| MidSurfaceByFacePairs |
Represents a mid surface by face pairs feature
To create or edit an instance of this class, use MidSurfaceByFacePairsBuilder Created in NX7.5.0 |
| MidSurfaceByFacePairsBuilder |
Represents a
MidSurfaceByFacePairs builder
To create a new instance of this class, use FeatureCollection.createMidSurfaceByFacePairsBuilder(nxopen.features.Feature) Default values. |
| MidSurfaceFacePair |
Represents a mid surface by face pairs feature
This is an abstract class . |
| MidSurfaceUserDefined |
Represents a midsurface user defined feature
To create or edit an instance of this class, use MidSurfaceUserDefinedBuilder Created in NX7.5.0 |
| MidSurfaceUserDefinedBuilder |
Represents a
MidSurfaceUserDefined builder
To create a new instance of this class, use FeatureCollection.createMidSurfaceUserDefinedBuilder(nxopen.features.MidSurfaceUserDefined) Default values. |
| Mirror |
Represents a mirror feature.
|
| MirrorBody |
Represents a mirror body feature.
|
| MirrorBodyBuilder |
Represents a
MirrorBody builder. |
| MirrorBuilder |
Represents a
Mirror builder. |
| MirrorCurve |
Represents a mirror curve feature
To create or edit an instance of this class, use MirrorCurveBuilder Created in NX6.0.0 |
| MirrorCurveBuilder |
Represents a
MirrorCurve builder
To create a new instance of this class, use FeatureCollection.createMirrorCurveBuilder(nxopen.features.Feature) Default values. |
| MirrorFace |
Represents a Mirror Face feature
To create or edit an instance of this class, use MirrorFaceBuilder Created in NX6.0.0 |
| MirrorFaceBuilder |
Represents a
MirrorFace builder
To create a new instance of this class, use FeatureCollection.createMirrorFaceBuilder(nxopen.features.Feature) Default values. |
| MirrorFeature |
Represents a mirror feature feature.
|
| MirrorFeatureBuilder |
Represents a
MirrorFeature builder
To create a new instance of this class, use FeatureCollection.createMirrorFeatureBuilder(nxopen.features.Feature) Created in NX5.0.0 |
| MoveCurve |
Represents a move curve feature
To create or edit an instance of this class, use MoveCurveBuilder Created in NX9.0.0 |
| MoveCurveBuilder |
Represents a
MoveCurve builder
To create a new instance of this class, use SynchronousCurveCollection.createMoveCurveBuilder(nxopen.features.MoveCurve) Default values. |
| MoveEdge |
Represents a move edge feature
To create or edit an instance of this class, use MoveEdgeBuilder Created in NX9.0.0 |
| MoveEdgeBuilder |
Represents a
MoveEdge builder
To create a new instance of this class, use SynchronousEdgeCollection.createMoveEdgeBuilder(nxopen.features.MoveEdge) Default values. |
| MoveFace |
Represents a move face feature , don't use it until nx502
To create or edit an instance of this class, use MoveFaceBuilder Created in NX5.0.2 |
| MoveFaceBuilder |
Represents a builder for a move face feature, don't use it until nx502.
|
| MoveObject |
Represents a Move-Object feature.
|
| MoveObjectBuilder |
Represents a
MoveObjectBuilder . |
| NormalCutout |
Represents a Normal Cutout feature
To create or edit an instance of this class, use NormalCutoutBuilder Created in NX5.0.0 |
| NSidedSurface |
Represents a nsided surface feature
To create or edit an instance of this class, use NSidedSurfaceBuilder Created in NX6.0.0 |
| NSidedSurfaceBuilder |
Represents a
NSidedSurface builder
To create a new instance of this class, use FeatureCollection.createNSidedSurfaceBuilder(nxopen.features.NSidedSurface) Default values. |
| Offset3DCurve |
Represents a offset 3D curve feature
To create or edit an instance of this class, use Offset3DCurveBuilder Created in NX10.0.0 |
| Offset3DCurveBuilder |
Represents a
Offset3DCurveBuilder builder which implements
offset curves along a direction with offset distance in three dimension. |
| OffsetCurve |
Represents a offset curve feature
To create or edit an instance of this class, use OffsetCurveBuilder Created in NX5.0.0 |
| OffsetCurveBuilder |
Represents a
OffsetCurve builder To create a new instance of this class, use FeatureCollection.createOffsetCurveBuilder(nxopen.features.Feature) Default values. |
| OffsetEdge |
Represents a offset edge feature
To create or edit an instance of this class, use OffsetEdgeBuilder Created in NX9.0.0 |
| OffsetEdgeBuilder |
Represents a
OffsetEdge builder
To create a new instance of this class, use SynchronousEdgeCollection.createOffsetEdgeBuilder(nxopen.features.OffsetEdge) Created in NX9.0.0 |
| OffsetEmboss |
Represents an offset emboss feature
To create or edit an instance of this class, use OffsetEmbossBuilder Created in NX5.0.0 |
| OffsetEmbossBuilder |
Represents a builder for an offset emboss feature.
|
| OffsetFace |
Represents a offset face feature
To create or edit an instance of this class, use OffsetFaceBuilder Created in NX5.0.0 |
| OffsetFaceBuilder |
Represents a
OffsetFace builder
To create a new instance of this class, use FeatureCollection.createOffsetFaceBuilder(nxopen.features.Feature) Default values. |
| OffsetFacetBody |
Represents a offset facet body feature
To create or edit an instance of this class, use OffsetFacetBodyBuilder Created in NX12.0.0 |
| OffsetFacetBodyBuilder |
Represents a
OffsetFacetBody . |
| OffsetMoveCurve |
Represents a offset move curve feature
To create or edit an instance of this class, use OffsetMoveCurveBuilder Created in NX9.0.0 |
| OffsetMoveCurveBuilder |
Represents a
OffsetMoveCurve builder
To create a new instance of this class, use SynchronousCurveCollection.createOffsetMoveCurveBuilder(nxopen.features.OffsetMoveCurve) Default values. |
| OffsetRegion |
Represents an offset region feature , don't use it until nx502
To create or edit an instance of this class, use OffsetRegionBuilder Created in NX5.0.2 |
| OffsetRegionBuilder |
Represents a builder for an offset region feature, don't use it until nx502.
|
| OffsetSurface |
Represents a offset surface feature.
|
| OffsetSurfaceBuilder |
This class represents a offset surface builder, used for creating or editing an
offset surface feature.
|
| OptimizeCurveBuilder |
Represents a builder of optimize curve
To create a new instance of this class, use FeatureCollection.createOptimizeCurveBuilder() Default values. |
| OptimizeFace |
Represents a optimize face feature
To create or edit an instance of this class, use OptimizeFaceBuilder Created in NX7.0.0 |
| OptimizeFaceBuilder |
Represents a builder of optimize face
To create a new instance of this class, use FeatureCollection.createOptimizeFaceBuilder() Default values. |
| OutputFeatureData |
Represents the data of a output feature.
|
| OvercrownBuilder |
Represents a Overcrown Builder
To create an instance of this this class use FeatureCollection.createOvercrownFeatureBuilder(nxopen.features.Feature) Created in NX4.0.0 |
| PaintParametersBuilder |
Represents a paint feature parameters builder.
|
| Parallel |
Represents a parallel feature
To create or edit an instance of this class, use ParallelBuilder Created in NX6.0.0 |
| ParallelBuilder |
Represents a
Parallel builder. |
| PartGeometryCopyBuilder | |
| PartGeometryCopySelectBuilder | |
| PartGeometryCopySelectBuilderList |
Represents a list of objects.
|
| PartModule |
Represents a part module
To create or edit an instance of this class, use PartModuleBuilder Created in NX8.0.0 |
| PartModuleBuilder |
Represents a
PartModule builder To create a new instance of this class, use FeatureCollection.createPartModuleBuilder(nxopen.features.PartModule) Created in NX8.0.0 |
| PasteFace |
Represents a paste face feature
To create or edit an instance of this class, use PasteFaceBuilder Created in NX6.0.0 |
| PasteFaceBuilder |
Represents a builder for a paste face feature.
|
| Patch |
Represents a Patch feature
To create or edit an instance of this class, use PatchBuilder Created in NX6.0.1 |
| PatchBuilder |
Represents a
PatchBuilder
Lets you use a sheet body to replace some of the faces of a solid body. |
| PatchOpenings |
Represents a Patch Openings feature
To create or edit an instance of this class, use PatchOpeningsBuilder Created in NX5.0.0 |
| PatchOpeningsBuilder |
Represents a builder for a Patch Openings feature.
|
| PatternFace |
Represents a pattern face feature , don't use it until nx502
To create or edit an instance of this class, use PatternFaceBuilder Created in NX5.0.2 |
| PatternFaceBuilder |
Represents a builder for a pattern face feature, don't use it until nx502.
|
| PatternFaceFeature |
Represents a pattern face feature
To create or edit an instance of this class, use PatternFaceFeatureBuilder Created in NX9.0.0 |
| PatternFaceFeatureBuilder |
Represents a builder for a pattern face feature, post NX9.
|
| PatternFeature |
Represents a pattern feature
To create or edit an instance of this class, use PatternFeatureBuilder Created in NX7.0.0 |
| PatternFeatureBuilder |
Represents a
PatternFeature builder
To create a new instance of this class, use FeatureCollection.createPatternFeatureBuilder(nxopen.features.Feature) Default values. |
| PatternGeometry |
Represents a pattern geometry feature.
|
| PatternGeometryBuilder |
This class represents the builder to be used to create Pattern Geometry features.
|
| Perpendicular |
Represents a perpendicular feature
To create or edit an instance of this class, use PerpendicularBuilder Created in NX6.0.0 |
| PerpendicularBuilder |
Represents a
Perpendicular builder
To create a new instance of this class, use FeatureCollection.createPerpendicularBuilder(nxopen.features.Perpendicular) Default values. |
| PierceTask |
Represents a Pierce Task feature
To create or edit an instance of this class, use PierceTaskBuilder Created in NX5.0.0 |
| PointFeature |
Represents a point feature
To create or edit an instance of this class, use PointFeatureBuilder Created in NX5.0.0 |
| PointFeatureBuilder |
Represents a
PointFeatureBuilder builder
To create a new instance of this class, use BaseFeatureCollection.createPointFeatureBuilder(nxopen.features.Feature) Created in NX5.0.0 |
| PointSet |
Represents a point set feature
To create or edit an instance of this class, use PointSetBuilder Created in NX6.0.0 |
| PointSetBuilder |
Represents a
PointSetBuilder . |
| PointSetFacePercentageBuilder |
Represents a
PointSetFacePercentageBuilder . |
| PointSetFacePercentageBuilderList |
Represents a list of objects.
|
| PoleSmoothing |
Represents a pole smoothing feature
To create or edit an instance of this class, use PoleSmoothingBuilder Created in NX6.0.0 |
| PoleSmoothingBuilder |
Represents a
PoleSmoothing builder
To create a new instance of this class, use FeatureCollection.createPoleSmoothingBuilder(nxopen.features.PoleSmoothing) Default values. |
| PolylineBuilder |
Polyline builder class.
|
| Prebend |
Represents a Prebend feature
To create or edit an instance of this class, use PrebendBuilder Created in NX10.0.0 |
| ProjectCurve |
Represents a project curve feature.
|
| ProjectCurveBuilder |
Represents a
ProjectCurve builder. |
| Promotion |
Represents a promotion feature.
|
| PromotionBuilder |
Represents a
Promotion builder. |
| PullFace |
Represents a pull face feature
To create or edit an instance of this class, use PullFaceBuilder Created in NX6.0.0 |
| PullFaceBuilder |
Represents a
PullFace builder
To create a new instance of this class, use FeatureCollection.createPullFaceBuilder(nxopen.features.PullFace) Default values. |
| QuickBinder |
Represents a quick binder feature
To create or edit an instance of this class, use QuickBinderBuilder Created in NX7.5.0 |
| RadialDimension |
Represents a radial dimension feature
To create or edit an instance of this class, use RadialDimensionBuilder Created in NX6.0.0 |
| RadialDimensionBuilder |
Represents a
RadialDimension builder
To create a new instance of this class, use FeatureCollection.createRadialDimensionBuilder(nxopen.features.RadialDimension) Created in NX6.0.0 |
| RapidSurface |
Represents a Rapid Surfacing feature
To create or edit an instance of this class, use RapidSurfaceBuilder Created in NX5.0.0 |
| RapidSurfaceBuilder |
Represents a
RapidSurface builder
To create a new instance of this class, use FeatureCollection.createRapidSurfaceBuilder(nxopen.features.RapidSurface) Default values. |
| RasterImage |
Represents a Raster Image feature
Not supported by KF at this time . |
| Rebend |
Represents a Rebend feature
To create or edit an instance of this class, use RebendBuilder Created in NX5.0.0 |
| ReferenceMapperBuilder |
Represents a
ReferenceMapperBuilder
It is used in the context of Boolean Target/Tool Mapping. |
| RefitFace |
Represents a refit face feature
To create or edit an instance of this class, use RefitFaceBuilder Created in NX6.0.0 |
| RefitFaceBuilder |
Represents a
RefitFace builder
To create a new instance of this class, use FeatureCollection.createRefitFaceBuilder(nxopen.features.RefitFace) Default values. |
| RegionListItemBuilder |
Represents a
RegionListItemBuilder builder
To create a new instance of this class, use VarOffsetFaceBuilder.createRegionListItem() Default values. |
| RegionListItemBuilderList |
Represents a list of objects.
|
| RemoveParametersBuilder |
Represents a
RemoveParametersBuilder . |
| ReorderBlends |
Represents a reorder blends feature
To create or edit an instance of this class, use ReorderBlendsBuilder Created in NX7.5.1 |
| ReorderBlendsBuilder |
Represents a
ReorderBlends builder
To create a new instance of this class, use FeatureCollection.createReorderBlendsBuilder(nxopen.features.ReorderBlends) Created in NX7.5.1 |
| ReplaceBlend |
Represents a replace blend feature
To create or edit an instance of this class, use ReplaceBlendBuilder Created in NX7.0.0 |
| ReplaceBlendBuilder |
Represents a builder for a Replace Blend feature.
|
| ReplaceFace |
Represents a replace face feature , don't use it until nx502
To create or edit an instance of this class, use ReplaceFaceBuilder Created in NX5.0.2 |
| ReplaceFaceBuilder |
Represents a builder for a replace face feature, don't use it until nx502.
|
| ReplaceFeatureBuilder |
Represents a replace feature builder.
|
| ResizeBendAngle |
Represents a resize bend angle feature
To create or edit an instance of this class, use ResizeBendAngleBuilder Created in NX5.0.0 |
| ResizeBendRadius |
Represents a resize bend radius feature
To create or edit an instance of this class, use ResizeBendRadiusBuilder Created in NX5.0.0 |
| ResizeBlend |
Represents a resize blend feature , don't use it until nx502
To create or edit an instance of this class, use ResizeBlendBuilder Created in NX5.0.2 |
| ResizeBlendBuilder |
Represents a builder for a resize blend feature, don't use it until nx502.
|
| ResizeChamfer |
Represents a resize chamfer feature
To create or edit an instance of this class, use ResizeChamferBuilder Created in NX7.0.0 |
| ResizeChamferBuilder |
Represents a
ResizeChamfer builder
To create a new instance of this class, use FeatureCollection.createResizeChamferBuilder(nxopen.features.ResizeChamfer) Default values. |
| ResizeChamferCurve |
Represents a resize chamfer curve feature
To create or edit an instance of this class, use ResizeChamferCurveBuilder Created in NX10.0.0 |
| ResizeChamferCurveBuilder |
Represents a
ResizeChamferCurve builder
To create a new instance of this class, use SynchronousCurveCollection.createResizeChamferCurveBuilder(nxopen.features.ResizeChamferCurve) Created in NX10.0.0 |
| ResizeCurve |
Represents a resize curve feature
To create or edit an instance of this class, use ResizeCurveBuilder Created in NX9.0.0 |
| ResizeCurveBuilder |
Represents a
ResizeCurve builder
To create a new instance of this class, use SynchronousCurveCollection.createResizeCurveBuilder(nxopen.features.ResizeCurve) Default values. |
| ResizeFace |
Represents a resize blend feature , don't use it until nx502
To create or edit an instance of this class, use ResizeFaceBuilder Created in NX5.0.2 |
| ResizeFaceBuilder |
Represents a builder for a resize face feature, don't use it until nx502.
|
| ResizeNeutralFactor |
Represents a resize neutral factor feature
To create or edit an instance of this class, use ResizeNeutralFactorBuilder Created in NX5.0.0 |
| ResizePlane |
Represents a Resize Datum Plane feature
To create or edit an instance of this class, use ResizePlaneBuilder Created in NX6.0.3 |
| ResizePlaneBuilder |
Represents a
ResizePlane builder
To create a new instance of this class, use FeatureCollection.createResizePlaneBuilder(nxopen.features.Feature) Created in NX6.0.3 |
| Revolve |
Represents a revolve feature.
|
| RevolveBuilder |
Represents a revolve builder.
|
| Rib |
Represents a rib feature
To create or edit an instance of this class, use RibBuilder Created in NX9.0.0 |
| Ribbon |
Represents a ribbon feature
To create or edit an instance of this class, use RibbonBuilder Created in NX6.0.0 |
| RibbonBuilder |
Represents a
Ribbon builder
To create a new instance of this class, use FeatureCollection.createRibbonBuilder(nxopen.features.Feature) Default values. |
| RibBuilder |
Represents a
Rib builder
To create a new instance of this class, use DesignFeatureCollection.createRibBuilder(nxopen.features.Rib) Default values. |
| Rotor |
Represents a Die CAM Rotor feature.
|
| RPO |
Represents an RPO dimension
This is an abstract class, and cannot be instantiated . |
| RPOBuilder |
Represents a RPO builder.
|
| RPODimension |
Represents a RPO Dimension.
|
| Ruled |
Represents a ruled feature.
|
| RuledBuilder |
Represents a
Ruled builder
To create a new instance of this class, use FeatureCollection.createRuledBuilder(nxopen.features.Feature) Default values. |
| Scale |
Represents a scale feature.
|
| ScaleBuilder |
Represents a
Scale builder. |
| ScaleCurve |
Represents a scale curve feature
To create or edit an instance of this class, use ScaleCurveBuilder Created in NX11.0.0 |
| ScaleCurveBuilder |
Represents a
ScaleCurveBuilder builder
To create a new instance of this class, use CurveFeatureCollection.createScaleCurveBuilder(nxopen.features.ScaleCurve) Default values. |
| SectionCurve |
Represents a section curves feature.
|
| SectionCurveBuilder |
Represents a
SectionCurve builder. |
| SectionEdit |
Represents a section edit feature
To create or edit an instance of this class, use SectionEditBuilder Created in NX6.0.0 |
| SectionEditBuilder |
Represents a
SectionEdit builder
To create a new instance of this class, use FeatureCollection.createSectionEditBuilder(nxopen.features.SectionEdit) Created in NX6.0.0 |
| SectionInertiaAnalysis |
Represents a section inertia analysis feature
To create or edit an instance of this class, use SectionInertiaAnalysisBuilder Created in NX5.0.0 |
| SectionInertiaAnalysisBuilder |
Represents a
SectionInertiaAnalysis builder
To create a new instance of this class, use FeatureCollection.createSectionInertiaAnalysisBuilder(nxopen.features.SectionInertiaAnalysis) Default values. |
| SectionSurface |
Represents a section surface feature
To create or edit an instance of this class, use SectionSurfaceBuilder Created in NX6.0.0 |
| SectionSurfaceBuilder | Deprecated
Deprecated in NX9.0.0.
|
| SectionSurfaceBuilderEx |
Represents a
SectionSurface builder. |
| SelectBodyFeatureList |
Represents a list of objects on a selection list.
|
| SelectDatumCsysList |
Represents a list of objects on a selection list.
|
| SelectFeature |
Represents a single object selection.
|
| SelectFeatureList |
Represents a list of objects on a selection list.
|
| SelectFlatPattern |
Represents a single object selection.
|
| SelectPartModule |
Represents a single object selection.
|
| ServiceOrientedBodyFeature |
Represents a body feature
To create or edit an instance of this class, use ServiceOrientedBodyFeatureBuilder Created in NX11.0.0 |
| ServiceOrientedBodyFeatureBuilder |
Represents a
ServiceOrientedBodyFeature builder
Not support KF. |
| ServiceOrientedFeatureCurve |
Represents a curve feature
To create or edit an instance of this class, use ServiceOrientedFeatureCurveBuilder Created in NX11.0.0 |
| ServiceOrientedFeatureCurveBuilder |
Represents a
ServiceOrientedFeatureCurve builder
Not support KF. |
| Sew |
Represents a sew feature.
|
| SewBuilder |
Represents a
Sew builder. |
| SheetMetalFromSolid |
Represents a Sheet Metal from Solid feature
To create or edit an instance of this class, use SheetMetalFromSolidBuilder Created in NX6.0.0 |
| Shelf |
Represents a shelf feature
To create or edit an instance of this class, use ShelfBuilder Created in NX10.0.0 |
| ShelfBuilder |
Represents a
Shelf builder
To create a new instance of this class, use AeroCollection.createShelfBuilder(nxopen.features.Shelf) Default values. |
| Shell |
Represents a Shell feature.
|
| ShellBuilder |
Represents the Shell feature builder.
|
| ShellFace |
Represents a shell face feature
To create or edit an instance of this class, use ShellFaceBuilder Created in NX6.0.0 |
| ShellFaceBuilder |
Represents a
ShellFace builder To create a new instance of this class, use FeatureCollection.createShellFaceBuilder(nxopen.features.ShellFace) Default values. |
| ShipCollection |
This class contains the factory method for creating ship feature builder.
|
| ShowRelatedFacesBuilder |
Represents a builder for a Show Related Faces.
|
| SilhouetteFlange |
Represents a silhouette flange feature
To create or edit an instance of this class, use SilhouetteFlangeBuilder Created in NX6.0.0 |
| SilhouetteFlangeBuilder |
Represents a
SilhouetteFlange builder
To create a new instance of this class, use FeatureCollection.createSilhouetteFlangeBuilder(nxopen.features.SilhouetteFlange) Default values. |
| SketchConversionReport |
Represents a collection of status of conversion of features to independent sketch.
|
| SketchConversionStatus |
Represents the status of conversion of features to independent sketch.
|
| SketchFeature |
Represents a sketch feature
This is an abstract class, and cannot be instantiated . |
| SketchFitCurveBuilder |
Sketch Fit Curve builder class.
|
| SketchSplineBuilder |
Sketch Spline builder class.
|
| SmoothCurveString |
Represents a smooth section feature
To create or edit an instance of this class, use SmoothCurveStringBuilder Created in NX9.0.0 |
| SmoothCurveStringBuilder |
Represents a
SmoothCurveString builder
To create a new instance of this class, use FreeformCurveCollection.createSmoothCurveStringBuilder(nxopen.features.SmoothCurveString) Default values. |
| SmoothRangeBuilder |
Represents a
SmoothRangeBuilder builder
To create a new instance of this class, use FlowBlendBuilder.newSmoothRange() Created in NX10.0.0 |
| SmoothRangeBuilderList |
Represents a list of objects.
|
| SmoothSpline |
Represents a smooth spline feature
To create or edit an instance of this class, use SmoothSplineBuilder Created in NX6.0.0 |
| SmoothSplineBuilder |
Represents a
SmoothSpline builder
To create a new instance of this class, use FeatureCollection.createSmoothSplineBuilder(nxopen.features.SmoothSpline) Default values. |
| SnipSurface |
Represents a snip surface feature
To create or edit an instance of this class, use SnipSurfaceBuilder Created in NX6.0.0 |
| SnipSurfaceBuilder |
Represents a
SnipSurface builder
To create a new instance of this class, use FeatureCollection.createSnipSurfaceBuilder(nxopen.features.SnipSurface) Default values. |
| SoftBlend |
Represents a Soft Blend feature.
|
| SolidPunch |
Represents a Solid Punch feature
To create or edit an instance of this class, use SolidPunchBuilder Created in NX6.0.2 |
| Sphere |
Represents a sphere feature
To create or edit an instance of this class, use SphereBuilder Created in NX6.0.0 |
| SphereBuilder |
Represents a
Sphere builder. |
| SphericalCorner |
Represents a spherical corner feature
To create or edit an instance of this class, use SphericalCornerBuilder Created in NX8.5.0 |
| SphericalCornerBuilder |
Represents a
SphericalCorner builder
To create a new instance of this class, use FeatureCollection.createSphericalCornerBuilder(nxopen.features.SphericalCorner) Default values. |
| SpineCurve |
Represents a spine curve feature
To create or edit an instance of this class, use SpineCurveBuilder Created in NX11.0.0 |
| SpineCurveBuilder |
Represents a
SpineCurve builder
To create a new instance of this class, use FreeformCurveCollection.createSpineCurveBuilder(nxopen.features.SpineCurve) Default values. |
| SplitBody |
Represents a split body feature.
|
| SplitBodyBuilder |
Represents a
SplitBody builder. |
| Step |
Represents a step feature
To create or edit an instance of this class, use StepBuilder Created in NX10.0.0 |
| StepBuilder |
Represents a
Step builder
To create a new instance of this class, use AeroCollection.createStepBuilder(nxopen.features.Step) Default values. |
| StudioSpline |
Represents a studio spline feature
To create or edit an instance of this class, use StudioSplineBuilderEx Created in NX5.0.0 |
| StudioSplineBuilder | Deprecated
Deprecated in NX8.0.0.
|
| StudioSplineBuilderEx |
Studio Spline builder class.
|
| StudioSurface |
Represents a studio surface feature
To create or edit an instance of this class, use StudioSurfaceBuilder Created in NX5.0.0 |
| StudioSurfaceBuilder |
Represents a
StudioSurface builder
To create a new instance of this class, use FeatureCollection.createStudioSurfaceBuilder(nxopen.features.Feature) Default values. |
| StudioSurfaceBuilderEx |
Represents a
StudioSurfaceEx builder
To create a new instance of this class, use FreeformSurfaceCollection.createStudioSurfaceBuilderEx(nxopen.features.Feature) Default values. |
| StudioSurfaceEx |
Represents a new studio surface feature
To create or edit an instance of this class, use StudioSurfaceBuilderEx Created in NX8.5.0 |
| StudioXform |
Represents a studio xform feature
To create or edit an instance of this class, use StudioXformBuilderEx Created in NX6.0.0 |
| StudioXformBuilder | Deprecated
Deprecated in NX8.5.0.
|
| StudioXformBuilderEx |
Represents a
StudioXform builder To create a new instance of this class, use FeatureCollection.createStudioXformBuilderEx(nxopen.features.StudioXform) Default values. |
| StyledBlend |
Represents a styled blend feature
To create or edit an instance of this class, use StyledBlendBuilder Created in NX6.0.0 |
| StyledBlendBuilder |
Represents a
StyledBlend builder
To create a new instance of this class, use FeatureCollection.createStyledBlendBuilder(nxopen.features.StyledBlend) Default values. |
| StyledCorner |
Represents a styled corner feature
To create or edit an instance of this class, use StyledCornerBuilder Created in NX6.0.0 |
| StyledCornerBuilder |
Represents a
StyledCorner builder
To create a new instance of this class, use FeatureCollection.createStyledCornerBuilder(nxopen.features.StyledCorner) Default values. |
| StyledSweep |
Represents a styled sweep feature
To create or edit an instance of this class, use StyledSweepBuilder Created in NX6.0.0 |
| StyledSweepBuilder |
Represents a
StyledSweep builder
To create a new instance of this class, use FeatureCollection.createStyledSweepBuilder(nxopen.features.Feature) Default values. |
| Subtract | Deprecated
Deprecated in NX4.0.0.
|
| SweepAlongGuide |
Represents a sweep along guide feature
To create or edit an instance of this class, use SweepAlongGuideBuilder Created in NX6.0.0 |
| SweepAlongGuideBuilder |
Represents a
SweepAlongGuide builder
To create a new instance of this class, use FeatureCollection.createSweepAlongGuideBuilder(nxopen.features.SweepAlongGuide) Default values. |
| SweepFeatureCollection |
Manages sweep-like features.
|
| Swept |
Represents a swept feature
To create or edit an instance of this class, use SweptBuilder Created in NX5.0.0 |
| SweptBuilder |
Represents a
Swept builder
To create a new instance of this class, use FeatureCollection.createSweptBuilder(nxopen.features.Swept) Default values. |
| SweptVolume |
Represents a swept volume feature
To create or edit an instance of this class, use SweptVolumeBuilder Created in NX9.0.0 |
| SweptVolumeBuilder |
Represents a
SweptVolume builder
To create a new instance of this class, use SweepFeatureCollection.createSweptVolumeBuilder(nxopen.features.SweptVolume) Default values. |
| Symmetric |
Represents a symmetric feature.
|
| SymmetricBuilder |
Represents a
Symmetric builder To create a new instance of this class, use FeatureCollection.createSymmetricBuilder(nxopen.features.Symmetric) Default values. |
| SynchronousCurveCollection |
This class contains the factory method for creating ST curve builder.
|
| SynchronousEdgeCollection |
This class contains the factory method for creating ship feature builder.
|
| Tab |
Represents a Tab feature
To create or edit an instance of this class, use TabBuilder Created in NX5.0.0 |
| TabNoteCfgBuilder | |
| Tangent |
Represents a tangent feature
To create or edit an instance of this class, use TangentBuilder Created in NX6.0.0 |
| TangentBuilder |
Represents a
Tangent builder
To create a new instance of this class, use FeatureCollection.createTangentBuilder(nxopen.features.Tangent) Default values. |
| Text |
Represents a text feature
To create or edit an instance of this class, use TextBuilder Created in NX7.5.1 |
| TextBuilder |
Represents a
Text builder
To create a new instance of this class, use FeatureCollection.createTextBuilder(nxopen.features.Text) Default values. |
| Thicken |
Represents a thicken feature.
|
| ThickenBuilder |
Represents a builder for a
Thicken feature. |
| ThreeBendCorner |
Represents a ThreeBendCorner feature
To create or edit an instance of this class, use ThreeBendCornerBuilder Created in NX5.0.0 |
| ThroughCurveMesh |
Represents a through curve mesh feature.
|
| ThroughCurveMeshBuilder |
Represents a
ThroughCurveMesh builder. |
| ThroughCurves |
Represents a Through Curves feature.
|
| ThroughCurvesBuilder |
Represents a
ThroughCurves builder. |
| ToolingBox |
Represents a tooling box feature
To create or edit an instance of this class, use ToolingBoxBuilder Created in NX10.0.0 |
| ToolingBoxBuilder |
Represents a
ToolingBox builder
To create a new instance of this class, use ToolingFeatureCollection.createToolingBoxBuilder(nxopen.features.ToolingBox) Default values. |
| ToolingCollection |
This class contains the factory method for creating tooling feature builder.
|
| ToolingFeatureCollection |
This class contains the factory method for creating tooling feature builder.
|
| TrackingData |
Represents tracking information for outputs created by custom feature.
|
| TrimAndExtend |
Represents a trim and extend feature
To create or edit an instance of this class, use TrimAndExtendBuilder Created in NX9.0.0 |
| TrimAndExtendBuilder |
Represents a
TrimAndExtend builder
To create a new instance of this class, use TrimFeatureCollection.createTrimAndExtendBuilder(nxopen.features.TrimAndExtend) Default values. |
| TrimBody |
Represents a Trim Body feature.
|
| TrimBody2 |
Represents a trim body feature.
|
| TrimBody2Builder |
Represents a
TrimBody2 builder for Trim Body
feature. |
| TrimBodyBuilder |
Represents the trim body feature builder.
|
| TrimCornerBuilder |
Represents a builder for non-associative trim corner operation.
|
| TrimCurve |
Represents a trim curve feature
To create or edit an instance of this class, use TrimCurveBuilder Created in NX5.0.0 |
| TrimCurve2 |
Represents a new trim curve feature feature
To create or edit an instance of this class, use TrimCurve2Builder Created in NX11.0.1 |
| TrimCurve2Builder |
Represents a
TrimCurve2 builder
To create a new instance of this class, use FeatureCollection.createTrimCurve2FeatureBuilder(nxopen.features.TrimCurve2) Default values. |
| TrimCurveBuilder |
Represents a
TrimCurve builder
To create a new instance of this class, use FeatureCollection.createTrimCurveBuilder(nxopen.features.TrimCurve) Default values. |
| TrimExtend |
Represents a trim extend feature.
|
| TrimExtendBuilder |
Represents a
TrimExtend builder. |
| TrimFeatureCollection |
Manages design features.
|
| TrimLineDevelopment |
Represents a trim line development feature
To create or edit an instance of this class, use TrimLineDevelopmentBuilder Created in NX6.0.0 |
| TrimSheet |
Represents a trim sheet feature.
|
| TrimSheetBuilder |
Represents a
TrimSheet builder. |
| Tube |
Represents a tube feature
To create or edit an instance of this class, use TubeBuilder Created in NX5.0.0 |
| TubeBuilder |
Represents a
Tube builder
To create a new instance of this class, use FeatureCollection.createTubeBuilder(nxopen.features.Feature) Default values. |
| Unbend |
Represents a Unbend feature
To create or edit an instance of this class, use UnbendBuilder Created in NX5.0.0 |
| Unite | Deprecated
Deprecated in NX4.0.0.
|
| UniversalUnform |
Represents a UniversalUnform feature
To create or edit an instance of this class, use UniversalUnformBuilder Created in NX8.5.0 |
| Unsew |
Represents a Unsew feature
To create or edit an instance of this class, use UnsewBuilder Created in NX5.0.0 |
| UnsewBuilder |
Represents a
Unsew builder
To create a new instance of this class, use FeatureCollection.createUnsewBuilder(nxopen.features.Unsew) Default values. |
| Untrim |
Represents a Untrim feature.
|
| UntrimBuilder |
Represents a
Untrim builder
To create a new instance of this class, use FeatureCollection.createUntrimBuilder(nxopen.features.Feature) Created in NX5.0.0 |
| UserDefinedFeatureApplicationData |
JA interface for UserDefinedFeatureApplicationData object .
|
| UserDefinedFeatureApplicationField |
JA interface for UserDefinedFeatureApplicationField object .
|
| UserDefinedFeatureClass |
JA interface for UserDefinedFeatureClass
An instance of this class can be obtained from UserDefinedFeatureClassManager.createClass(java.lang.String) Created in NX8.0.0 |
| UserDefinedFeatureClass.CopyCallback |
Prototype for copy callbacks
|
| UserDefinedFeatureClass.CreateCallback |
Prototype for create callbacks
|
| UserDefinedFeatureClass.EditCallback |
Prototype for edit callbacks
|
| UserDefinedFeatureClass.IconCallback |
Prototype for icon callbacks
|
| UserDefinedFeatureClass.UpdateCallback |
Prototype for update callbacks
|
| UserDefinedFeatureClassManager |
JA interface for the UserDefinedFeatureClassManager object
To obtain an instance of this class, refer to Session Created in NX8.0.0 |
| UserDefinedFeatureCopyEvent |
JA interface for the UserDefinedFeatureCopyEvent object
This calls cannot be created . |
| UserDefinedFeatureCreateEvent |
JA interface for the UserDefinedFeatureCreateEvent object
This calls cannot be created . |
| UserDefinedFeatureEditEvent |
JA interface for the UserDefinedFeatureEditEvent object
This calls cannot be created . |
| UserDefinedFeatureExpressionData |
JA interface for UserDefinedFeatureExpressionData object.
|
| UserDefinedFeatureIconEvent |
JA interface for the UserDefinedFeatureIconEvent object
This calls cannot be created . |
| UserDefinedFeatureReferenceData |
JA interface for UserDefinedFeatureReference object.
|
| UserDefinedFeatureUpdateEvent |
JA interface for the UserDefinedFeatureUpdateEvent object
This calls cannot be created . |
| UserDefinedObjectFeature |
Represents a User Defined Object feature.
|
| UserDefinedObjectFeatureBuilder |
Represents a user defined object feature builder.
|
| VariableOffset |
Represents a variable offset feature
To create or edit an instance of this class, use VariableOffsetBuilder Created in NX8.0.0 |
| VariableOffsetBuilder |
Represents a
VariableOffset builder
To create a new instance of this class, use FeatureCollection.createVariableOffsetBuilder(nxopen.features.VariableOffset) Default values. |
| VariableRadiusPointsBuilder |
Represents a
VariableRadiusPointsBuilder builder
To create a new instance of this class, use FlowBlendBuilder.newControlPoint() Created in NX10.0.0 |
| VariableRadiusPointsBuilderList |
Represents a list of objects.
|
| VarOffsetFace |
Represents a var offset face feature
To create or edit an instance of this class, use VarOffsetFaceBuilder Created in NX11.0.0 |
| VarOffsetFaceBuilder |
Represents a
VarOffsetFace builder
To create a new instance of this class, use FeatureCollection.createVarOffsetFaceBuilder(nxopen.features.VarOffsetFace) Default values. |
| Varsweep |
Represents a Varsweep feature.
|
| VarsweepBuilder |
Represents a Variational Sweep feature builder.
|
| VehicleDesignCollection |
This class contains the factory method for creating vehicle design feature builder.
|
| VirtualBlendEdgeBuilder |
Represents a
VirtualBlendEdgeBuilder To create a new instance of this class, use FeatureCollection.createVirtualBlendEdgeBuilder() Created in NX7.0.1 |
| VirtualCurve |
Represents a virtual curve feature
To create or edit an instance of this class, use VirtualCurveBuilder Created in NX7.5.0 |
| VirtualCurveBuilder |
Represents a
VirtualCurve builder
To create a new instance of this class, use FeatureCollection.createVirtualCurveBuilder(nxopen.features.VirtualCurve) Default values. |
| WaveDatum |
Represents a WAVEDATUM feature
To create or edit an instance of this class, use WaveDatumBuilder Created in NX5.0.0 |
| WaveDatumBuilder |
Represents a Wave Datum builder.
|
| WaveInterfaceLinkerBuilder |
Represents a WaveInterfacelinker Feature builder
To create a new instance of this class, use BaseFeatureCollection.createWaveInterfaceLinkerBuilder(nxopen.features.Feature) Default values. |
| WaveLink |
Represents a wavelink feature.
|
| WaveLinkBuilder |
Represents a Wavelink Feature builder.
|
| WavePoint |
Represents a wavepoint feature
To create or edit an instance of this class, use WavePointBuilder Created in NX5.0.0 |
| WavePointBuilder |
Represents a
Feature builder
To create a new instance of this class, use FeatureCollection.createWavePointBuilder(nxopen.features.Feature) Default values. |
| WaveRouting |
Represents a waverouting feature
To create or edit an instance of this class, use WaveRoutingBuilder Created in NX5.0.0 |
| WaveRoutingBuilder |
Represents a
WaveRoutingBuilder
To create a new instance of this class, use FeatureCollection.createWaveRoutingBuilder(nxopen.features.Feature) Default values. |
| WaveSketch |
Represents a WAVESKETCH feature
To create or edit an instance of this class, use WaveSketchBuilder Created in NX5.0.1 |
| WaveSketchBuilder |
Represents a WaveSketchBuilder.
|
| WrapBuilder |
Represents a
WrapUnwrap builder. |
| WrapGeometry |
Represents a wrap geometry feature
To create or edit an instance of this class, use WrapGeometryBuilder Created in NX6.0.0 |
| WrapGeometryBuilder |
Represents a
WrapGeometry builder
To create a new instance of this class, use FeatureCollection.createWrapGeometryBuilder(nxopen.features.WrapGeometry) Default values. |
| WrapUnwrap |
Represents a wrap or unwrap curve feature
To create or edit an instance of this class, use WrapBuilder Created in NX6.0.0 |
| Class | Description |
|---|---|
| AdmMoveFaceBuilder.MoveOptionType |
Represents the move option.
|
| AeroFlangeBuilder.AlignReferenceType |
This attribute represents align end type
|
| AeroFlangeBuilder.GuideObjectTypes |
This attribute represents the Guide Object types
|
| AeroFlangeBuilder.LimitObjectTypes |
This attribute represents the limit object types
|
| AeroFlangeBuilder.PointOption |
This attribute represents the options for on path dimension
|
| AeroFlangeBuilder.ThicknessDimensionOptions |
This attribute represents the options for thickness dimension
|
| AeroFlangeBuilder.WidthDimensionOptions |
This attribute represents the options for width dimension
|
| AeroFlangeBuilder.WidthMethods |
This attribute represents the width method
|
| AeroRibBuilder.AlignReferenceType |
This attribute represents align end type
|
| AeroRibBuilder.GuideObjectTypes |
This attribute represents the Guide Object types
|
| AeroRibBuilder.HeightDimensionOptions |
This attribute represents the options for height dimension
|
| AeroRibBuilder.LimitObjectTypes |
This attribute represents the limit object types
|
| AeroRibBuilder.PointOption |
This attribute represents the options for on path dimension
|
| AeroRibBuilder.RibForms |
This attribute represents the Rib Form
|
| AeroRibBuilder.ThicknessDimensionOptions |
This attribute represents the options for thickness dimension
|
| AestheticFaceBlendBuilder.AlignmentType |
Alignment method provides the ability to align the cross sections of the blend in the user specified direction
|
| AestheticFaceBlendBuilder.BlendFacesType |
Trimming options
|
| AestheticFaceBlendBuilder.BlendType |
Tangent method will create tangent lines based on the method employed.
|
| AestheticFaceBlendBuilder.CenterType |
Center methods will define peak of the blend
|
| AestheticFaceBlendBuilder.EndTrimObjectType |
End object overriding trim options
|
| AestheticFaceBlendBuilder.RhoType |
Rho options
|
| AestheticFaceBlendBuilder.SegmentationType |
Segmentations options
|
| AestheticFaceBlendBuilder.ShapeType |
Shape methods will define the high level shape of the blend cross section.
|
| AestheticFaceBlendBuilder.StartTrimObjectType |
Start object overriding trim options
|
| AnalyzePocketBuilder.AngledWallSolutions |
Represents the solution which defines how the End Mill is positioned with the angled walls.
|
| AnalyzePocketBuilder.ToolTypes |
Represents the tool type which defines how the angled walls are cut.
|
| AOCSBuilder.CurveOffsetTypes |
AOCS builder curve offset type enum
|
| AOCSBuilder.Extend |
AOCS builder extend to each other within section type enum.
|
| AOCSBuilder.ExtendToFace |
AOCS builder extend to face edges type enum.
|
| AOCSBuilder.FilletOptions |
AOCS builder fillet options type enum.
|
| AOCSBuilder.OffsetDirection |
AOCS builder offset direction type enum.
|
| AOCSBuilder.OffsetDistanceType |
AOCS builder offset distance type enum.
|
| AOCSBuilder.OffsetType |
AOCS builder offset type enum.
|
| AOCSBuilder.Trim |
AOCS builder trim to each other within section type enum.
|
| AssociativeArcBuilder.CenterReference |
Represents references for center point
|
| AssociativeArcBuilder.EndOption |
Represents end point options type
|
| AssociativeArcBuilder.EndReference |
Represents references for end point
|
| AssociativeArcBuilder.MidOption |
Represents mid point options type
|
| AssociativeArcBuilder.MidReference |
Represents references for mid point
|
| AssociativeArcBuilder.StartOption |
Represents start point options type
|
| AssociativeArcBuilder.StartReference |
Represents references for start point
|
| AssociativeArcBuilder.Types |
Represents arc type.
|
| AssociativeLineBuilder.EndOption |
Represents end options type.
|
| AssociativeLineBuilder.EndReference |
Represents references for end point
|
| AssociativeLineBuilder.StartOption |
Represents start options type.
|
| AssociativeLineBuilder.StartReference |
Represents references for start point
|
| AssociativityType |
Represents the associativity type for a dimension entity
|
| BlendCornerBuilder.ContinuityTypes |
Continuity options
|
| BlendPocketBuilder.AngledWallSolutions |
Represents the solution which defines how the End Mill is positioned with the angled walls.
|
| BlendPocketBuilder.ToolTypes |
Represents the tool type which defines how the angled walls are cut.
|
| BlockFeatureBuilder.OrientationData |
This class holds the data returned from
BlockFeatureBuilder.getOrientation() |
| BlockFeatureBuilder.Types |
Represents the block types
|
| BodyByEquationBuilder.LocationTypes |
The option to specify where the Symbolica or Maple worksheet exists.
|
| BodyByEquationBuilder.StlFileUnitTypes |
The option to specify the size of an STL unit (e.g. selecting Millimeters means that every STL unit is represented as 1 mm within the NX work part).
|
| BridgeCurveBuilder.ConstraintTypes |
This enum represents the end continuity constraint types for the bridge curve
|
| BridgeCurveBuilder.CurveDirectionTypes |
This enum represents the direction type for input curves
|
| BridgeCurveBuilder.CurveFitTypes |
This enum represents the curve fit types for the bridge curve
|
| BridgeCurveBuilder.EndObjectTypes |
This enum represents the current selected end object types for the bridge curve
|
| BridgeCurveBuilder.MinRadiusTypes |
This enum represents the minimum radius types for the bridge curve
|
| BridgeCurveBuilder.SelectedObject |
This enum represents the current selected object for the bridge curve
|
| BridgeCurveBuilder.ShapeControlTypes |
This enum represents the shape control types for the bridge curve
|
| BridgeCurveBuilder.SurfaceDirectionTypes |
This enum represents the direction type for input surfaces
|
| BridgeCurveBuilderEx.EndObjectTypes |
End object type
|
| BridgeCurveBuilderEx.RadiusConstraintMethods |
Radius constraint methods
|
| BridgeCurveBuilderEx.ShapeControlMethods |
Shape control methods
|
| BridgeCurveBuilderEx.StartObjectTypes |
Start object type
|
| ChamferBuilder.ChamferOption |
This enum represents the chamfer parameter options
|
| ChamferBuilder.OffsetMethod |
This enum represents the offset method options
|
| CircularBlendCurveBuilder.CylinderDirectionOption |
Represents the cylinder direction options
|
| CircularBlendCurveBuilder.CylinderRadiusOption |
Represents the cylinder radius options
|
| ColorFeatureBuilder.OperationType |
specify color or remove color type
|
| ColorFeatureGroupBuilder.OperationType |
specify color or remove color type
|
| ColorFeatureGroupBuilder.ProcessType |
set color for new features only or set color and apply to all members
|
| CompositeCurveBuilder.JoinMethod |
the join method
|
| CompositeCurveBuilder.PartType |
Composite Curve part type.
|
| CompositeCurveBuilder.WaveLinkInformationData |
This class holds the data returned from
CompositeCurveBuilder.getWaveLinkInformation() |
| ConcaveFacesBuilder.CalculatePointCurvatureData |
This class holds the data returned from
ConcaveFacesBuilder.calculatePointCurvature(nxopen.Face, nxopen.Point3d) |
| ConeBuilder.Types |
Represents the Cone type
|
| CopyPasteBuilder.BuilderVersion |
Types of version number
|
| CopyPasteBuilder.ExpressionTransferOption |
Types of expression transfer mode
|
| CopyPasteBuilder.ParentSelectOption |
Types of parent select option; Specifying smart object or selecting input for original parent
|
| CopyPasteBuilder.ParentTransferOption |
Types of parent transfer mode
|
| CustomAttribute.Property |
Specifies custom attribute type.
|
| CustomAttribute.Type |
Specifies custom attribute type.
|
| CustomFeatureCreateFeatureGeometryEvent.CopyNXBodyData |
This class holds the data returned from
CustomFeatureCreateFeatureGeometryEvent.copyNXBody(nxopen.Body) |
| CustomFeatureData.AllCustomAttributeNameAndTypesData |
This class holds the data returned from
CustomFeatureData.getAllCustomAttributeNameAndTypes() |
| CylinderBuilder.Types |
the cylinder types
|
| DatumAxisBuilder.AlternateSolution |
Specifies the alternate solution for datum axis using point on curve method only
|
| DatumAxisBuilder.ConstraintType |
Specifies different constraint types for selected geometries
|
| DatumAxisBuilder.CurveOption |
Specifies the distance on the curve as absolute distance or relative distance as percentage
|
| DatumAxisBuilder.CurveOrientations |
Available orientations that the user can choose when the Datum Axis type is On Curve Vector
|
| DatumAxisBuilder.DirectionOrientations |
Two available direction orientations that the user can choose when the Datum Axis type is Point and Direction
|
| DatumAxisBuilder.FixedType |
Specifies the fixed type datum axis going thru only one specific axis or thru all axes.
|
| DatumAxisBuilder.Types |
New Datum Axis types in NX5
|
| DatumAxisBuilder.UseArcLength |
Specifies points for which arclength is to be used.
|
| DatumCsysBuilder.WaveLinkInformationData |
This class holds the data returned from
DatumCsysBuilder.getWaveLinkInformation() |
| DatumPlaneBuilder.AlternateSolution |
Specifies the alternate solution for a datum plane using point on curve method
|
| DatumPlaneBuilder.ConstraintType |
Specifies different constraint types of selected geometries
|
| DatumPlaneBuilder.CurveOption |
Specifies the distance on the curve as absolute distance or relative distance as percentage
|
| DatumPlaneBuilder.FixedType |
Specifies the fixed type datum plane going thru only one specific plane or thru all planes
|
| DatumPlaneBuilder.UseArcLength |
Specifies points for which arclength is to be used.
|
| DeformDefinitionBuilder.ExpressionType |
Specifies the way of providing input to expression during deform instantiation.
|
| DeformDefinitionBuilder.JaDeformDefinitionExpData | |
| DeformDefinitionBuilder.RangeType |
Specifies type of range of input values when
DeformDefinitionBuilder.ExpressionType
is DeformDefinitionBuilder.ExpressionType.RANGE . |
| DeleteFaceBuilder.CapOptionValues |
Represents the cap option values.
|
| DeleteFaceBuilder.FaceEdgeBlendPreferenceOptions |
Represents the face edge blend preference options.
|
| DeleteFaceBuilder.SelectTypes |
Enumeration of select type, don't use it until nx502 .
|
| DeleteFaceBuilder.SetbackOptions |
Represents the set back options.
|
| DivideCurveBuilder.CornerOption |
Represents the Divide Curve at Corner option types
|
| DivideCurveBuilder.EqualSegmentOption |
Represents the Divide Curve equal segment method types
|
| DivideCurveBuilder.InputArcLengthDirectionFlag |
Represents the Divide Curve Input Arc length direction flag
|
| DivideCurveBuilder.KnotPointOption |
Represents the Divide Curve at Knot option types
|
| DivideCurveBuilder.Types |
Represents the Divide Curve types
|
| DraftBodyBuilder.MatchingScope |
Describes the different match scopes.
|
| DraftBodyBuilder.MatchingType |
Describes the different match types
|
| DraftBodyBuilder.MatchOption |
Describes the different match options.
|
| DraftBodyBuilder.Method |
Describes the Draft Body method as true draft or isocline draft.
|
| DraftBodyBuilder.RepairingPartingEdgeOption |
Describes the different repair parting edges options.
|
| DraftBodyBuilder.RepairOption |
Describes the different repair options.
|
| DraftBodyBuilder.Types |
Describes the different Draft Body types
|
| DraftBuilder.DraftReferencesMethods |
Describes the different Draft Methods in Draft References
|
| DraftBuilder.Method |
Describes the Draft type as true draft or isocline draft.
|
| DraftBuilder.Type |
Describes the different Draft types
|
| EdgeBlendBuilder.ChainsetAndSectionValueData |
This class holds the data returned from
EdgeBlendBuilder.getChainsetAndSectionValue(int) |
| EdgeBlendBuilder.ChainsetAndStatusData |
This class holds the data returned from
EdgeBlendBuilder.getChainsetAndStatus(int) |
| EdgeBlendBuilder.ChainsetData |
This class holds the data returned from
EdgeBlendBuilder.getChainset(int) |
| EdgeBlendBuilder.Conic |
This enum represents the Conic option
|
| EdgeBlendBuilder.FaceContinuity |
The Blend Face Continuity
|
| EdgeBlendBuilder.OrderOfBlending |
This enum represents the order of Blending
|
| EdgeBlendBuilder.Overlap |
This enum represents the Overlap resolution options for Edge Blend
|
| EdgeBlendBuilder.Rhotype |
This enum represents the rho type for conic section blend
|
| EdgeBlendBuilder.Section |
This enum represents the Section option
|
| EdgeBlendBuilder.Setback |
This enum represents the Setback option
|
| EdgeBlendBuilder.SetbackData |
This class holds the data returned from
EdgeBlendBuilder.getSetbackData(int) |
| EdgeBlendBuilder.StopshortData |
This class holds the data returned from
EdgeBlendBuilder.getStopshortData(int) |
| EdgeBlendBuilder.VariableRadiusData |
This class holds the data returned from
EdgeBlendBuilder.getVariableRadiusData(nxopen.Edge) |
| EdgeBlendBuilder.VariableRadiusDataNewData |
This class holds the data returned from
EdgeBlendBuilder.getVariableRadiusDataNew(nxopen.Edge) |
| EdgeSymmetryBuilder.MovementDirections |
Movement directions
|
| EdgeSymmetryBuilder.MovementMethods |
Matching method options
|
| EdgeSymmetryBuilder.SymmetryPlaneOptions |
Symmetry plane options
|
| EmbedManagerBuilder.LocationTypes |
The option to specify where the file exists.
|
| EmbedManagerBuilder.TaskTypes |
The task to perform on the file.
|
| EmbedManagerBuilder.UsageAreaTypes |
The area in the part file where the file is to be stored.
|
| EmbossJoggle.JoggleDirectionMethod |
Describes the option that joggle direction along.
|
| EmbossLimit.EndcapMethod |
Describes the method that can be applied to the selected geometry to define the End-Cap.
|
| EmbossLimit.EndcapSourceOption |
Describes the geometry that is used to create the End-Cap face/body.
|
| EmbossProjection.ProjectionOption |
Describes the geometry for projection
|
| EmbossRegion.ConvexityOption |
Describes whether the emboss geometry is above the target("Pad") or below the target("Pocket"), or both("Mixed").
|
| EmbossSidewall.SidewallMethod |
Describes the method that can be applied to define the sidewall.
|
| EnlargeBuilder.ExtensionTypes |
Extension types
|
| ExtendSheetBuilder.BodyOutput |
Creates extension as an existing or a new entity
|
| ExtendSheetBuilder.Limit |
Determines the Limit type for extension
|
| ExtendSheetBuilder.SideEdgeShape |
Determines the path of the extension
|
| ExtendSheetBuilder.SurfaceShape |
Determines the surface type of the extension
|
| ExtensionBuilder.Distance |
The distance type.
|
| ExtensionBuilder.Extension |
The extension method.
|
| ExtensionBuilder.Types |
The part of the face to extend.
|
| ExtractFaceBuilder.ExtractType |
enum for feature type being extracted
|
| ExtractFaceBuilder.FaceOptionType |
enum for face option type
|
| ExtractFaceBuilder.FaceSurfaceType |
type of resulting surface
|
| ExtractFaceBuilder.FeatureOptionType |
enum for feature option type
|
| ExtractFaceBuilder.ParentPartType |
enum for scope of part
|
| ExtractFaceBuilder.WaveLinkInformationData |
This class holds the data returned from
ExtractFaceBuilder.getWaveLinkInformation() |
| FaceBlendBuilder.CrossSectionOption |
This enum represents the Cross section types
|
| FaceBlendBuilder.DefiningType |
This enum represents the Face Blend defining type, it is added in NX75 for new three face blend
|
| FaceBlendBuilder.LimitPlanesData |
This class holds the data returned from
FaceBlendBuilder.getLimitPlanes() |
| FaceBlendBuilder.OverflowMethod |
This enum represents the overflow options
|
| FaceBlendBuilder.RhoMethod |
This enum represents the rho types
|
| FaceBlendBuilder.TrimmingMethod |
This enum represents the Trimming options for Face Blend
|
| FaceBlendBuilder.Type |
This enum represents the Face Blend types
|
| FaceBlendBuilder.WidthMethod |
This enum represents the Face Blend width method, it is added in NX10 for two face blend
|
| Feature.BooleanType |
Boolean operation type.
|
| Feature.DiagnosticType |
Diagnostic type
|
| FeatureCollection.CreateIntersectFeatureData |
This class holds the data returned from
FeatureCollection.createIntersectFeature(nxopen.Body, boolean, nxopen.Body[], boolean, boolean) |
| FeatureCollection.CreateSubtractFeatureData |
This class holds the data returned from
FeatureCollection.createSubtractFeature(nxopen.Body, boolean, nxopen.Body[], boolean, boolean) |
| FeatureCollection.CreateUniteFeatureData |
This class holds the data returned from
FeatureCollection.createUniteFeature(nxopen.Body, boolean, nxopen.Body[], boolean, boolean) |
| FeatureCollection.ReorderType |
Reorder operation type.
|
| FeatureGroup.Type |
Feature group type.
|
| FillHoleBuilder.BorderContinuity |
Represents continuity value at a border curve.
|
| FillHoleBuilder.ContinuityTypes |
border continuity connects border object with the surface continuity
|
| FillHoleBuilder.ShapeControlTypes |
type of the shape control
|
| FitCurveBuilder.FittingParametersOptions |
Fitting parameters options
|
| FitCurveBuilder.ProjectionDirectionOptions |
Auxiliary curve projection direction options
|
| FitCurveBuilder.TargetSourceTypes |
Fitting target types
|
| FitCurveBuilder.Types |
Fitting types
|
| FitSurfaceBuilder.DirectionType |
Direction method provides the ability to specify the projection direction and orientation
|
| FitSurfaceBuilder.TargetType |
Target type provides the ability to specify a object or a color coded region as the target
|
| FitSurfaceBuilder.Types |
Fit Surface creation types
|
| FlatPattern.ObjectDataCsys |
Structure used to return data about objects in the flat pattern.
|
| FlatPattern.ObjectDataEdge |
Structure used to return data about objects in the flat pattern.
|
| FlatPattern.ObjectDataFace |
Structure used to return data about objects in the flat pattern.
|
| FlatPattern.ObjectDataGeneral |
Structure used to return data about objects in the flat pattern.
|
| FlatSolid.ObjectDataCsys |
Structure used to return the objects of a flat solid.
|
| FlatteningAndFormingBuilder.DestinationFrameData |
This class holds the data returned from
FlatteningAndFormingBuilder.getDestinationFrame() |
| FlatteningAndFormingBuilder.DistortionMap |
Distortion Map options.
|
| FlatteningAndFormingBuilder.Types |
Flattening Types
|
| FlatteningAndFormingBuilderEx.Constraints |
No constraints options.
|
| FlatteningAndFormingBuilderEx.DistortionMap |
Distortion Map options.
|
| FlatteningAndFormingBuilderEx.Types |
Flattening Types
|
| GeneralConicBuilder.DrawingPlaneOptions |
Drawing Plane options.
|
| GeneralConicBuilder.Types |
General Conic Types.
|
| GeodesicIntersectBuilder.Type |
Represents the type of objects that intersect with the support faces.
|
| GeodesicProjectBuilder.Type |
Represents the type of objects projected to the support faces.
|
| GeomcopyBuilder.AlongPathDistanceOptions |
along path distance options
|
| GeomcopyBuilder.CsysMirrorOptions |
CSYS mirror options
|
| GeomcopyBuilder.TransformTypes |
user input transform types.
|
| GeometricConstraintData.AutoConstraintType |
Automatic constraint types
|
| GeometricConstraintData.ParameterDirection |
Parameter direction to be used for creation of the constraint at a point
which is attached to an object, for example a curve or a face
|
| GlobalShapingBuilder.BodyMethod |
Represents the body method type.
|
| GlobalShapingBuilder.DeformationTypeValues |
Represents the deformation type.
|
| GlobalShapingBuilder.DeformBodyType |
Represent sheet deformation type.
|
| GlobalShapingBuilder.DirectionMethodType |
Represents the direction method type.
|
| GlobalShapingBuilder.ModifyMethodType |
Represent surface modify method.
|
| GlobalShapingBuilder.OffsetMethod |
Represents the offset method type.
|
| GlobalShapingBuilder.PointMethodType |
Represents the point method type.
|
| GlobalShapingBuilder.RadiusType |
Represents radius options used.
|
| GlobalShapingBuilder.RotationMethod |
Represents the rotation method type.
|
| GlobalShapingBuilder.RotationMethodType |
Represents the rotation type.
|
| GlobalShapingBuilder.TargetCurveOrientationType |
Represents the orientation of the target curve(s) to the limit curves.
|
| GlobalShapingBuilder.TransitionType |
Represents the transition method type.
|
| GuidedExtensionBuilderEx.SegmentType |
Segment type for segments
|
| GuidedExtensionBuilderEx.Types |
Option types to create guided extension surface
|
| HelixBuilder.LengthMethods |
Method for defining the length
|
| HelixBuilder.OrientationOptions |
Orientation options for along spine type
|
| HelixBuilder.SizeOptions |
Option indicating how size is defined
|
| HelixBuilder.TurnDirections |
Option indicating direction of the turn
|
| HelixBuilder.Types |
Type of helix
|
| Hole.CounterboreHoleData |
This class holds the data returned from
Hole.getCounterboreHole() |
| Hole.CountersinkHoleData |
This class holds the data returned from
Hole.getCountersinkHole() |
| Hole.SimpleHoleData |
This class holds the data returned from
Hole.getSimpleHole() |
| Hole.Subtype |
Represents the subtype of the hole
|
| HoleFeatureBuilder.HoleSubtype |
Represents the subtype of the hole
|
| HolePackageBuilder.HoleDepthLimitOptions |
Represents hole depth limit options.
|
| HolePackageBuilder.HoleDepthOptions |
Represents hole depth specification options.
|
| HolePackageBuilder.HoleForms |
Represents hole form options.
|
| HolePackageBuilder.ThreadLengthOptions |
Represents thread length options.
|
| HolePackageBuilder.ThreadRotationOptions |
Represents thread rotation options.
|
| HolePackageBuilder.Types |
Represents hole types.
|
| Human.CreateReachZoneData |
This class holds the data returned from
Human.createReachZone() |
| HumanBuilder.StatureData |
This class holds the data returned from
HumanBuilder.getStatureData() |
| HumanBuilder.WeightData |
This class holds the data returned from
HumanBuilder.getWeightData() |
| IFormBuilder.BSurfaceExtractionOptions |
B-surface extraction options
|
| IFormBuilder.GlobalTransitionTypes |
Global transition options of the surface
|
| IFormBuilder.InsertionMethodOptions |
Iso-parameter curve insertion option
|
| IFormBuilder.ParameterDirectionOptions |
Iso-parameter direction options
|
| IFormBuilder.TransitionTypes |
Transition options of the surface
|
| IsoclineCurveBuilder.CurveTypes |
The option indicating number of curves to be created
|
| IsoparametricCurvesBuilder.DirectionTypes |
Curve direction options
|
| IsoparametricCurvesBuilder.PlacementTypes |
Curve creation options
|
| JoinCurvesBuilder.OutputCurve |
Represents the output curve type.
|
| LabelChamferBuilder.ChamferOrientType |
the option for chamfer orientation types
|
| LabelChamferBuilder.ChamferType |
the option for chamfer types
|
| LatticeBuilder.LatticeTypes |
This enum represents the lattice types that are supported in NX.
|
| LawExtensionBuilder.OppositeSideExtensionOptions |
Opposite side extension options
|
| LawExtensionBuilder.Types |
Law extension creation types
|
| LawExtensionBuilderEx.MiterOptions |
Miter options
|
| LawExtensionBuilderEx.OppositeSideExtensionOptions |
Opposite side extension options
|
| LawExtensionBuilderEx.Types |
Law extension creation types
|
| LinearDimensionBuilder.OrientationOptionType |
the option that controls whether the OrientXpress or whether the vector block
Controls the orientation of the Linear Dimension
|
| MapleBuilder.AssociativityEnum |
the associativity type
|
| MapleBuilder.LocationType |
The option to specify where the Symbolica or Maple worksheet exists.
|
| MasterCutBuilder.CalcThroughLimitsData |
This class holds the data returned from
MasterCutBuilder.calcThroughLimits(nxopen.Direction) |
| MatchEdgeBuilder.EdgeConstraintType |
Edge constraint type
|
| MatchEdgeBuilder.MatchExact |
Match Exact types
|
| MatchEdgeBuilder.PoleMoveDirection |
Pole movement direction
|
| MatchEdgeBuilder.PoleMovementConstraintEnumType |
Pole movement type
|
| MatchEdgeBuilder.Types |
Match Edge match types.
|
| MatchedReferenceBuilder.ResolvedStatus |
Matched status
|
| MatchedReferenceBuilder.Types |
MatchedReference block type
|
| MathIntegrationBuilder.AssociativityTypes |
the associativity
|
| MathIntegrationBuilder.LocationTypes |
The option to specify where the Symbolica or Maple worksheet exists.
|
| MeshSurfaceBuilder.AngleAlignmentPointsData |
This class holds the data returned from
MeshSurfaceBuilder.getAngleAlignmentPoints() |
| MeshSurfaceBuilder.ConstraintDirection |
End face constraints direction.
|
| MeshSurfaceBuilder.ConstraintType |
End face constraints types.
|
| MeshSurfaceBuilder.FaceConstraintCollectorsData |
This class holds the data returned from
MeshSurfaceBuilder.getFaceConstraintCollectors(int, int, int) |
| MeshSurfaceBuilder.ProfilePointAlignmentData |
This class holds the data returned from
MeshSurfaceBuilder.getProfilePointAlignment(int, int) |
| MeshTransformerBuilder.ContinuityType |
Continuity type
|
| MeshTransformerBuilder.MeshTopologyType |
Mesh topology option type
|
| MeshTransformerBuilder.SmoothingType |
Smoothing option type
|
| MeshTransformerBuilder.StepCountValue |
Step count enum value for converting to actual count number
|
| MidSurfaceByFacePairsBuilder.PairingStrategyType |
pairing strategy
|
| MidSurfaceByFacePairsBuilder.SurfaceType |
midsurface options
|
| MidSurfaceByFacePairsBuilder.TrimmingOptionType |
trimming options
|
| MirrorBodyBuilder.FeatureOptionType |
enum for feature option type
|
| MirrorBodyBuilder.ParentPart |
the parent part types
|
| MirrorBodyBuilder.WaveLinkInformationData |
This class holds the data returned from
MirrorBodyBuilder.getWaveLinkInformation() |
| MirrorBuilder.CsysMirrorOptions |
the Coordinate System mirror options
|
| MirrorCurveBuilder.PlaneOptions |
Represents the Plane options.
|
| MirrorFaceBuilder.MirrorPlaneOptions |
Represents the mirror plane options
|
| MirrorFeatureBuilder.PlaneOptions |
the Plane options.
|
| MoveEdgeBuilder.EndFaceBehaviorType |
Represents the end face behavior.
|
| MoveFaceBuilder.Types |
the move face types, don't use it until nx502
|
| MoveObjectBuilder.LayerOptionType |
Indicates the layer on which moved or copied objects will be placed
|
| MoveObjectBuilder.MoveObjectResultOptions |
Indicates whether to move or copy objects
|
| NSidedSurfaceBuilder.CenterControlAxisType |
the center control types
|
| NSidedSurfaceBuilder.CenterControlType |
the center control type options
|
| NSidedSurfaceBuilder.FlowDirectionType |
the flow direction options
|
| NSidedSurfaceBuilder.SurfaceType |
the surface type options
|
| NSidedSurfaceBuilder.UVOrientationType |
the UV orientation options
|
| OffsetCurveBuilder.ComputeOffsetDirectionData |
This class holds the data returned from
OffsetCurveBuilder.computeOffsetDirection() |
| OffsetCurveBuilder.TrimOption |
Represents the Offset Curve trim option
|
| OffsetCurveBuilder.Types |
Represents the Offset Curve types
|
| OffsetEdgeBuilder.EndFaceBehaviourType |
the end face behavior settings enumeration
|
| OffsetEdgeBuilder.OffsetEdgeMethod |
the offset edge method enumeration
|
| OffsetEmbossBuilder.Types |
Enumeration of center types .
|
| OffsetSurfaceBuilder.OrientationMethodType |
Represents the type of orientation method.
|
| OffsetSurfaceBuilder.OutputOptionType |
Represents the type of output option.
|
| OvercrownBuilder.ControlType |
This enum represents the control type of Global Shaping Operation
|
| OvercrownBuilder.OperationType |
This enum represents the type of Global Shaping Operation
|
| OvercrownBuilder.OutputType |
This enum represents the output type of Global Shaping Operation
|
| OvercrownBuilder.TransitionType |
This enum represents the transition type of Global Shaping Operation
|
| PartGeometryCopyBuilder.Type |
Specifies object types to copy in the part geometry copy block
|
| PartModule.PartLoadOption |
Defines part load options
|
| PasteFaceBuilder.PasteOptionType |
represents the paste option which defines whether the tool body is additive or subtractive.
|
| PatchOpeningsBuilder.CreatePathFromOpeningData |
This class holds the data returned from
PatchOpeningsBuilder.createPathFromOpening() |
| PatchOpeningsBuilder.OutputTypes |
Indicates what to output
|
| PatchOpeningsBuilder.Types |
The method used to patch the opening
|
| PatternFaceBuilder.PatternTypes |
Enumeration of pattern type, don't use it until nx502 .
|
| PatternFeatureBuilder.ExpressionTransferOptions |
the Expression transfer options.
|
| PatternFeatureBuilder.OutputOptions |
the Output options.
|
| PatternFeatureBuilder.PatternMethodOptions |
the Pattern method options.
|
| PointSetBuilder.CurvePointsType |
The settings for the curve points definition.
|
| PointSetBuilder.FacePointsType |
The settings for the face points definition.
|
| PointSetBuilder.PatternLimitsType |
The settings for the pattern limit definition.
|
| PointSetBuilder.SplinePointsType |
The settings for the spline points definition.
|
| PointSetBuilder.Types |
The settings for the type of Point Set feature.
|
| PolylineBuilder.DrawingPlaneOptions |
Drawing plane options
|
| PolylineBuilder.MovementMethodType |
Points movement types
|
| PolylineBuilder.WCSOptionType |
WCS principal axis or plane types
|
| ProjectCurveBuilder.ArcLengthType |
Represents Equal Arc Length type
|
| ProjectCurveBuilder.DirectionType |
Represents direction method
|
| ProjectCurveBuilder.ProjectionOptionType |
Represents projection option type used when direction type is along vector
|
| RadialDimensionBuilder.ValueOption |
the option for radius or diameter
|
| RapidSurfaceBuilder.AttachmentTypes |
the attachment types
|
| RapidSurfaceBuilder.LoopTypes |
the subdivision loop types
|
| RapidSurfaceBuilder.OperationTypes |
the operation types
|
| RasterImage.MaxTextureSize |
Specifies the maximum number of pixels to allow for the width or height
of a raster image.
|
| RefitFaceBuilder.Types |
the type of face refit
|
| RegionListItemBuilder.Type |
bridge continuity
|
| ReplaceFaceBuilder.ReplaceTypes |
Enumeration of replace face type, don't use it until nx502 .
|
| ReplaceFeatureBuilder.MappingMethodType |
Type of mapping method to be used for replace feature
|
| ResizeChamferBuilder.SectionType |
the chamfer section types
|
| ResizeCurveBuilder.ValueType |
the option for radius or diameter
|
| RibBuilder.RibCapGeometryOptions |
These represent the options for the Rib cap
|
| RibBuilder.RibDraftOptions |
These represent the options for drafting the Rib
|
| RibBuilder.RibThicknessOffsetOptions |
These represent the options for Rib Walls Offset
|
| RibBuilder.RibTypes |
These represent the options for Rib type
|
| RPOBuilder.AssociativityType |
Represents the associativity type for a dimension entity
|
| RPOBuilder.ReferenceDirectionData |
This class holds the data returned from
RPOBuilder.getReferenceDirection() |
| ScaleBuilder.Types |
Scale type
|
| ScaleCurveBuilder.ScaleCurveType |
Scale type
|
| SectionCurveBuilder.PlaneType |
Represents section plane type.
|
| SectionCurveBuilder.SpacingType |
Represents spacing type.
|
| SectionInertiaAnalysisBuilder.CoordSys |
The coordinate system associated with the analysis.
|
| SectionInertiaAnalysisBuilder.PropertyType |
Type of Analysis property.
|
| SectionInertiaAnalysisBuilder.SampleMethod |
Type of sampling method to be used in sections along curve type of analysis.
|
| SectionInertiaAnalysisBuilder.SectionAxisNormal |
Slice direction in case of parallel section type of analysis.
|
| SectionInertiaAnalysisBuilder.Types |
The type of Section Inertia Analysis to be performed.
|
| SectionSurfaceBuilder.ControlRegionEnum |
This enum represents the type of the region where depth and skew can be applied
|
| SectionSurfaceBuilder.FlowDirectionEnum |
This enum represents the type of flow direction for the start/end of the section surface
|
| SectionSurfaceBuilder.SectionMethodCircularTangentEnum |
This enum represents the current types of section method for circular tangent method
|
| SectionSurfaceBuilder.SectionMethodFilletBridgeEnum |
This enum represents the current types of section method for fillet bridge method
|
| SectionSurfaceBuilder.SectionMethodRhoEnum |
This enum represents the current types of section method for section methods with rho law
|
| SectionSurfaceBuilder.Types |
This enum represents the current types of section surface methods
|
| SectionSurfaceBuilder.UDegreeEnum |
This enum represents the current types of section surface in u direction
|
| SectionSurfaceBuilderEx.BodyType |
Body Preference type.
|
| SectionSurfaceBuilderEx.CircularType |
This enum represents the current modes of circular type section surfaces.
|
| SectionSurfaceBuilderEx.ConicType |
This enum represents the current modes of conic type section surfaces.
|
| SectionSurfaceBuilderEx.ControlRegionType |
Control Region type.
|
| SectionSurfaceBuilderEx.CubicType |
This enum represents the current modes of cubic type section surfaces.
|
| SectionSurfaceBuilderEx.LinearType |
This enum represents the current modes of linear type section surfaces.
|
| SectionSurfaceBuilderEx.SectionMethodCircleTangentType |
Section method Circle Tangent type.
|
| SectionSurfaceBuilderEx.SectionMethodFilletBridgeType |
Section method Fillet Bridge type.
|
| SectionSurfaceBuilderEx.SectionMethodRhoType |
Section method Rho type.
|
| SectionSurfaceBuilderEx.SlopeControlType |
Slope Control type.
|
| SectionSurfaceBuilderEx.Spine |
Spine type.
|
| SectionSurfaceBuilderEx.SpineEndFlowType |
Spine End Flow type.
|
| SectionSurfaceBuilderEx.SpineStartFlowType |
Spine Start Flow type.
|
| SectionSurfaceBuilderEx.Types |
This enum represents the current types of section surface methods.
|
| SectionSurfaceBuilderEx.UDegreeType |
Surface Degree type.
|
| SelectFeature.ValueData |
This class holds the data returned from
SelectFeature.getValue() |
| SelectFeature.ValueWithCaeSetObjectInfoData |
This class holds the data returned from
SelectFeature.getValue() |
| SelectFeature.ValueWithSnapData |
This class holds the data returned from
SelectFeature.getValue() |
| SelectFlatPattern.ValueData |
This class holds the data returned from
SelectFlatPattern.getValue() |
| SelectFlatPattern.ValueWithCaeSetObjectInfoData |
This class holds the data returned from
SelectFlatPattern.getValue() |
| SelectFlatPattern.ValueWithSnapData |
This class holds the data returned from
SelectFlatPattern.getValue() |
| SelectPartModule.ValueData |
This class holds the data returned from
SelectPartModule.getValue() |
| SelectPartModule.ValueWithCaeSetObjectInfoData |
This class holds the data returned from
SelectPartModule.getValue() |
| SelectPartModule.ValueWithSnapData |
This class holds the data returned from
SelectPartModule.getValue() |
| SewBuilder.Types |
Specifies the sew type.
|
| ShelfBuilder.DepthMethods |
Depth Method for Depth Face
|
| ShelfBuilder.LengthMethods |
Depth Method for Length
|
| ShelfBuilder.ReferenceType |
Type of Reference Object
|
| ShelfBuilder.StepMethod |
Step Method for Side Face
|
| ShelfBuilder.Types |
Type of shelf.
|
| ShipCollection.SteelFeatureApproach |
Represents steel feature different approaches.
|
| SilhouetteFlangeBuilder.OutputSurfaceOptions |
Output surface options
|
| SilhouetteFlangeBuilder.ReferenceDirectionOptions |
Reference direction options
|
| SilhouetteFlangeBuilder.Types |
Silhouette flange creation types
|
| SketchConversionStatus.ReasonType |
Reason for partial-success or failure of conversion to sketch
|
| SketchConversionStatus.Type |
Status of conversion - Success, Failure or Partial-Success
|
| SmoothCurveStringBuilder.LevelTypes |
the smoothing levels.
|
| SmoothCurveStringBuilder.MergeTypes |
the options to merge curves after being made continuous.
|
| SmoothCurveStringBuilder.Types |
the type of input curves.
|
| SmoothSplineBuilder.Types |
This enum represents the Smoothing Type option
|
| SnipSurfaceBuilder.Types |
Snip method added in v 7.5.0
|
| SphereBuilder.Types |
Represents the sphere types.
|
| SpineCurveBuilder.ArcSegmentsTypes |
This enum represents the arc segments types
|
| StepBuilder.DepthMethods |
Represents face operations applied to the motion face
|
| StepBuilder.ReferenceBoundaryTypes |
Represents selected type as reference boundary object
|
| StepBuilder.StepFaceMethods |
Represents face operations applied to the step face
|
| StepBuilder.StepLocations |
Represents the step location
|
| StepBuilder.StepNewTypes |
Represents the step feature new type since NX12
|
| StepBuilder.StepTypes |
Represents the step feature type
|
| StepBuilder.StepWallMethods |
Represents face operation applied to the step wall face
|
| StudioSplineBuilder.CurveOption |
Options of the actions to be taken on an input non-parametric spline
after its editing is done.
|
| StudioSplineBuilder.MatchKnotsType |
Options for creating knots at the defining points in case of through point spline
|
| StudioSplineBuilder.Method |
Spline methods.
|
| StudioSplineBuilderEx.DrawingPlaneOptions |
Drawing plane options
|
| StudioSplineBuilderEx.InputCurveOptions |
Options of the actions to be taken on an input non-parametric spline
after its editing is done.
|
| StudioSplineBuilderEx.MatchKnotsTypes |
Options for creating knots at the defining points in case of through point spline
|
| StudioSplineBuilderEx.MovementMethodType |
Points movement types
|
| StudioSplineBuilderEx.Types |
Spline methods.
|
| StudioSplineBuilderEx.WCSOptionType |
WCS principal axis or plane types
|
| StudioSurfaceBuilder.TransitionOptions |
the transition control options when using By Points alignment
method
|
| StudioSurfaceBuilderEx.TransitionOptions |
the transition control options when using By Points alignment
method
|
| StudioXformBuilder.AdvancedMethodType |
Represents the advanced method type
|
| StudioXformBuilder.FeatureType |
Represents the feature type
|
| StudioXformBuilder.InsertKnotDirectionType |
Represents the insert knot direction type
|
| StudioXformBuilder.PlanarizeDirectionType |
Represents the planarize direction type
|
| StudioXformBuilder.PlanarizeMethodType |
Represents the planarize method type
|
| StudioXformBuilder.PlanarizePlaneOptionType |
Represents the plane option type
|
| StudioXformBuilder.RotatingPivotType |
Represents the rotating pivot type
|
| StudioXformBuilder.RotationDirectionType |
Represents the rotation direction type
|
| StudioXformBuilder.ScalingCenterType |
Represents the scaling center type
|
| StudioXformBuilder.ScalingDirectionType |
Represents the scaling direction type
|
| StudioXformBuilder.TranslationDirectionType |
Represents the translation direction type
|
| StudioXformBuilder.Types |
Represents the Xform type
|
| StudioXformBuilderEx.AdvancedMethodOptionType |
Represents the advanced method option type
|
| StudioXformBuilderEx.AdvancedMethodType | Deprecated
Deprecated in NX8.5.0.
|
| StudioXformBuilderEx.ExtrationMethodType |
B-surface extraction method
|
| StudioXformBuilderEx.FeatureType |
Represents the feature type
|
| StudioXformBuilderEx.InsertKnotDirectionType |
Represents the insert knot direction type
|
| StudioXformBuilderEx.InsertPoleType |
Represents the insert pole type
|
| StudioXformBuilderEx.MovementMethodType |
Represents the Xform movement type
|
| StudioXformBuilderEx.PlanarizeDirectionType |
Represents the planarize direction type
|
| StudioXformBuilderEx.PlanarizeMethodType |
Represents the planarize method type
|
| StudioXformBuilderEx.PlanarizeProjectionPlaneType |
Represents the planarize projection plane type
|
| StudioXformBuilderEx.PoleEditType |
Editing types of a pole of spline belonging to a Studio Spline feature
|
| StudioXformBuilderEx.PrincipalMovementDirectionType |
Represents the principal movement direction type
|
| StudioXformBuilderEx.PrincipalRotatingAxisType |
Represents the principal rotation axis type
|
| StudioXformBuilderEx.PrincipalScalingDirectionType |
Represents the principal scaling direction type
|
| StudioXformBuilderEx.ProportionalPoleControlType |
Represents the pole control type in proportional method
|
| StudioXformBuilderEx.RotatingAxisType |
Represents the rotation axis type
|
| StudioXformBuilderEx.RotatingPivotType |
Represents the rotating pivot type
|
| StudioXformBuilderEx.ScalingCenterType |
Represents the scaling center type
|
| StudioXformBuilderEx.ScalingDirectionType |
Represents the scaling direction type
|
| StudioXformBuilderEx.SurfaceDirectionType |
Represents the U or V direction of a B-Surface
|
| StudioXformBuilderEx.Types |
Represents the Xform editing type
|
| StyledBlendBuilder.StyledBlendRadiusConstraintType |
The radius constraint type
|
| StyledBlendBuilder.StyledBlendShapeControlType |
The shape control types
|
| StyledBlendBuilder.StyledBlendTrimMethodType |
The trim method types
|
| StyledBlendBuilder.Types |
The styled blend types
|
| StyledCornerBuilder.CurveControlTypes |
Curve control types
|
| StyledCornerBuilder.InteriorCurveTypes |
Intertior curve type
|
| StyledCornerBuilder.ShapeControlMethodsTypes |
Shape control types
|
| StyledCornerBuilder.TrimAndSewMethodTypes |
Trim and attach method types
|
| StyledCornerBuilder.TrimCurveTypes |
Trim curve types
|
| StyledSweepBuilder.FixedStringOptions |
This enum represents the Fixed String option
|
| StyledSweepBuilder.ScalingMethodOptions |
This enum represents the Scaling Method option
|
| StyledSweepBuilder.SectionOrientationOptions |
This enum represents the Section Orientation option
|
| StyledSweepBuilder.TransitionOptions |
This enum represents the Transition option
|
| StyledSweepBuilder.Types |
This enum represents the sweep type option (Number of Guides)
|
| SweptBuilder.InterpolationOptions |
This enum represents the Interpolation option.
|
| SweptBuilder.SectionLocationTypes |
This enum represents the Section Location option.
|
| SweptVolumeBuilder.SweepOrient |
These represent the type of Sweep Orientation feature to be created
|
| SymmetricBuilder.PlaneOptions |
Represents the plane options.
|
| TabNoteCfgBuilder.Refplane |
the reference plane type.
|
| TextBuilder.FontStyleOptions |
Font style options
|
| TextBuilder.OnFacePlacementMethodOptions |
The placement options for
TextBuilder.Types.ON_FACE type |
| TextBuilder.OrientationMethodOptions |
The orientation options for
TextBuilder.Types.ON_CURVE type |
| TextBuilder.ScriptOptions |
Script or character set options
|
| TextBuilder.Types |
Text placement type
|
| ThroughCurveMeshBuilder.BodyPreferenceTypes |
This enum represents the body type option.
|
| ThroughCurveMeshBuilder.ConstructionMethod |
This enum represents the Construction options.
|
| ThroughCurveMeshBuilder.EmphasisType |
This enum represents the Emphasis options.
|
| ThroughCurvesBuilder.BodyPreferenceTypes |
This enum represents the body type option.
|
| ThroughCurvesBuilder.ConstructionMethod |
This enum represents the Construction options.
|
| ThroughCurvesBuilder.PatchTypes |
This enum represents the Patch options.
|
| ToolingBoxBuilder.RefCsysType |
the type of reference csys for box feature
|
| ToolingBoxBuilder.Types |
the type for box feature
|
| TrimAndExtendBuilder.ArrowSideType |
Trim or Extend Arrow Side Results type.
|
| TrimAndExtendBuilder.OperationType |
Trim or Extend operation type.
|
| TrimBodyBuilder.DirectionType |
Represents the trim direction
|
| TrimCurve2Builder.CurveExtension |
the Curve extension selection
|
| TrimCurve2Builder.Direction |
the Direction type selection
|
| TrimCurve2Builder.KeepDiscard |
the Keep or Discard selection
|
| TrimCurve2Builder.Operation |
the Trim or Divide selection
|
| TrimCurveBuilder.CurveEndOptions |
Represents the trim curve end options
|
| TrimCurveBuilder.CurveExtensionTypes |
Represents the trim curve extension types
|
| TrimCurveBuilder.CurveTrimRegionOptions |
Represents the trim curve trim region options
|
| TrimCurveBuilder.FirstBoundingObjectEndOptions |
Represents the trim curve first bounding object end options
|
| TrimCurveBuilder.FirstBoundingObjectOptions |
Represents the trim curve first bounding object options
|
| TrimCurveBuilder.InteresectionDirectionOptions |
Represents the trim curve interesection direction options
|
| TrimCurveBuilder.InteresectionMethods |
Represents the trim curve interesection methods
|
| TrimCurveBuilder.SecondBoundingObjectEndOptions |
Represents the trim curve second bounding object end options
|
| TrimCurveBuilder.SecondBoundingObjectOptions |
Represents the trim curve second bounding object options
|
| TrimExtendBuilder.ArrowSideOptions |
This enum represents the TrimExtend Arrow Side Options
|
| TrimExtendBuilder.CreationTypes |
This enum represents the TrimExtend types
|
| TrimExtendBuilder.ExtensionMethods |
This enum represents the TrimExtend Extension Methods
|
| TrimSheetBuilder.KeepDiscardOption |
Represents the keep discard options for selected region
|
| TubeBuilder.Output |
This enum represents the topology output option
|
| UnsewBuilder.UnsewOutput |
Unsew body option type.
|
| UnsewBuilder.UnsewTool |
Unsew tool option type.
|
| VariableOffsetBuilder.MethodOptions |
offset methods for creating the new surface
|
| VarOffsetFaceBuilder.Continuity |
bridge continuity
|
| VarOffsetFaceBuilder.Output |
body output type
|
| VarOffsetFaceBuilder.Types |
feature type
|
| VirtualCurveBuilder.Types |
the type of virtual curve
|
| WaveDatumBuilder.ParentPartType |
enum for scope of part
|
| WaveDatumBuilder.WaveLinkInformationData |
This class holds the data returned from
WaveDatumBuilder.getWaveLinkInformation() |
| WaveLinkBuilder.Types |
Wave Linker type
|
| WavePointBuilder.ParentPartType |
enum for scope of part
|
| WavePointBuilder.WaveLinkInformationData |
This class holds the data returned from
WavePointBuilder.getWaveLinkInformation() |
| WaveRoutingBuilder.WaveLinkInformationData |
This class holds the data returned from
WaveRoutingBuilder.getWaveLinkInformation() |
| WaveSketchBuilder.ParentPartType |
enum for scope of part
|
| WaveSketchBuilder.WaveLinkInformationData |
This class holds the data returned from
WaveSketchBuilder.getWaveLinkInformation() |
| WrapBuilder.Types |
Settings for the type of wrap operation being performed.
|
| WrapGeometryBuilder.CloseGapType |
Represents the close gap type
|
Copyright 2017 Siemens Product Lifecycle Management Software Inc. All Rights Reserved.