public interface DieCavityAndSlugHoleBuilder extends Builder
ProgressiveDieManager.createDieCavityAndSlugHoleBuilder()
Property | Value |
---|---|
AngleDiePlateTwo | -0.25 |
DieInsertStack | One |
DieOffsetValue | 0 |
DiePlateThree | 2 |
DiePlateTwo | 1 |
DieSameOffsetValue | 0 |
ForEachScrapDiePlateThree | 1 |
ForEachScrapDiePlateTwo | 1 |
NormalBottomBackPlateSlug | Fillet |
NormalCavity | TaperAngle |
NormalClearance | 0.05 |
NormalClearanceOption | Constant |
NormalDieShoeSlug | Fillet |
NormalForEachScrap1 | 0 |
NormalForEachScrap2 | 0 |
NormalOffsetSide | DieSide |
NormalRenameDialog | 0 |
NormalSlugInDiePlateThree | Fillet |
NormalSlugInDiePlateTwo | Fillet |
NormalSlugParameter1 | 3 |
NormalSlugParameter2 | -3 |
NormalSlugParameter3 | 2 |
NormalSlugParameter4 | 3 |
OffsetLinearDimension.Value | 3 (millimeters part), 0.12 (inches part) |
Position | Bottom |
ShimHeight | 0 |
ShimOffset | 0 |
SlugHoleHeightLinearDimension.Value | 100 (millimeters part), 4 (inches part) |
SpacerAngle | 0 |
SpacerOffset | 0 |
WaferHeight | 0 |
Modifier and Type | Interface and Description |
---|---|
static class |
DieCavityAndSlugHoleBuilder.BottomPlateSlugItems
Specifies the type of bottom plate slug.
|
static class |
DieCavityAndSlugHoleBuilder.CavityTypeItems
Specifies the type of cavity.
|
static class |
DieCavityAndSlugHoleBuilder.ClearanceOptionItems
Specifies the design option of piercing insert.
|
static class |
DieCavityAndSlugHoleBuilder.DieInsertStackType
die insert stack type.
|
static class |
DieCavityAndSlugHoleBuilder.DiePlateThreeSlugType
die plate three slug type.
|
static class |
DieCavityAndSlugHoleBuilder.DiePlateTwoSlugType
die plate two slug type.
|
static class |
DieCavityAndSlugHoleBuilder.DieShoeSlugTypeItems
Specifies the type of die shoe slug.
|
static class |
DieCavityAndSlugHoleBuilder.InsertPositionItems
Specifies the position of piercing inserts, for EDW only
|
static class |
DieCavityAndSlugHoleBuilder.OffsetSideOptionItems
Specifies the offset side of normal pierce insert design.
|
Modifier and Type | Method and Description |
---|---|
double |
angleDiePlateTwo()
Returns the angle of the die plate two
License requirements: None. |
void |
dieEditOffsetValueTable()
Edit offset value table for die
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard") . |
DieCavityAndSlugHoleBuilder.DieInsertStackType |
dieInsertStack()
Returns the die insert stack
License requirements: None. |
double |
dieOffsetValue()
Returns the die offset value
License requirements: None. |
double |
diePlateThree()
Returns the die plate three
License requirements: None. |
double |
diePlateTwo()
Returns the die plate two
License requirements: None. |
boolean |
dieSameOffsetValue()
Returns the die same offset value
License requirements: None. |
boolean |
forEachScrapDiePlateThree()
Returns the result whether use same clearance for each scrap in die plate three
License requirements: None. |
boolean |
forEachScrapDiePlateTwo()
Returns the for each scrap die plate two
License requirements: None. |
String |
newPartNames()
Returns the new component names.
|
DieCavityAndSlugHoleBuilder.BottomPlateSlugItems |
normalBottomBackPlateSlug()
Returns the normal bbpslug
License requirements: None. |
DieCavityAndSlugHoleBuilder.CavityTypeItems |
normalCavity()
Returns the normal cavity
License requirements: None. |
double |
normalClearance()
Returns the normal clearance
License requirements: None. |
DieCavityAndSlugHoleBuilder.ClearanceOptionItems |
normalClearanceOption()
Returns the normal clearance option
License requirements: None. |
void |
normalCreateCavityAndSlug()
Create normal cavity and slug
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard") . |
DieCavityAndSlugHoleBuilder.DieShoeSlugTypeItems |
normalDieShoeSlug()
Returns the normal dsslug
License requirements: None. |
boolean |
normalForEachScrap1()
Returns the normal for each scrap1
License requirements: None. |
boolean |
normalForEachScrap2()
Returns the normal for each scrap2
License requirements: None. |
DieCavityAndSlugHoleBuilder.OffsetSideOptionItems |
normalOffsetSide()
Returns the normal offset side
License requirements: None. |
boolean |
normalRenameDialog()
Returns the normal rename dialog
License requirements: None. |
SelectBodyList |
normalSelectPierceDieInsert()
Returns the normal select pierce die insert
License requirements: None. |
DieCavityAndSlugHoleBuilder.DiePlateThreeSlugType |
normalSlugInDiePlateThree()
Returns the normal slug in diePlateThree
License requirements: None. |
DieCavityAndSlugHoleBuilder.DiePlateTwoSlugType |
normalSlugInDiePlateTwo()
Returns the normal slug in die plate two
License requirements: None. |
double |
normalSlugParameter1()
Returns the normal slug parameter1
License requirements: None. |
double |
normalSlugParameter2()
Returns the normal slug parameter2
License requirements: None. |
double |
normalSlugParameter3()
Returns the normal slug parameter3
License requirements: None. |
double |
normalSlugParameter4()
Returns the normal slug parameter4
License requirements: None. |
Expression |
offsetLinearDimension()
Returns the offset linear dimension
License requirements: None. |
String |
parentPartName()
Returns the parent part name to create insert.
|
DieCavityAndSlugHoleBuilder.InsertPositionItems |
position()
Returns the position
License requirements: None. |
String |
selectOffsetSpreadsheet()
Returns the super offset spreadsheet
License requirements: None. |
SelectBodyList |
selectScrap()
Returns the select scrap
License requirements: None. |
SelectSketch |
selectSketch()
Returns the select sketch
License requirements: None. |
void |
setAngleDiePlateTwo(double angleDiePlateTwo)
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") . |
void |
setDieInsertStack(DieCavityAndSlugHoleBuilder.DieInsertStackType dieInsertStack)
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") . |
void |
setDieOffsetValue(double dieOffsetValue)
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard") . |
void |
setDiePlateThree(double diePlateThree)
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") . |
void |
setDiePlateTwo(double diePlateTwo)
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") . |
void |
setDieSameOffsetValue(boolean dieSameOffsetValue)
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard") . |
void |
setForEachScrapDiePlateThree(boolean forEachScrapDiePlateThree)
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") . |
void |
setForEachScrapDiePlateTwo(boolean forEachScrapDiePlateTwo)
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") . |
void |
setNewPartNames(String newPartNames)
License requirements: None. |
void |
setNormalBottomBackPlateSlug(DieCavityAndSlugHoleBuilder.BottomPlateSlugItems normalBottomBackPlateSlug)
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard") . |
void |
setNormalCavity(DieCavityAndSlugHoleBuilder.CavityTypeItems normalCavity)
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard") . |
void |
setNormalClearance(double normalClearance)
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard") . |
void |
setNormalClearanceOption(DieCavityAndSlugHoleBuilder.ClearanceOptionItems normalClearanceOption)
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard") . |
void |
setNormalDieShoeSlug(DieCavityAndSlugHoleBuilder.DieShoeSlugTypeItems normalDieShoeSlug)
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard") . |
void |
setNormalForEachScrap1(boolean normalForEachScrap1)
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard") . |
void |
setNormalForEachScrap2(boolean normalForEachScrap2)
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard") . |
void |
setNormalOffsetSide(DieCavityAndSlugHoleBuilder.OffsetSideOptionItems normalOffsetSide)
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard") . |
void |
setNormalRenameDialog(boolean normalRenameDialog)
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard") . |
void |
setNormalSlugInDiePlateThree(DieCavityAndSlugHoleBuilder.DiePlateThreeSlugType normalSlugInDiePlateThree)
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") . |
void |
setNormalSlugInDiePlateTwo(DieCavityAndSlugHoleBuilder.DiePlateTwoSlugType normalSlugInDiePlateTwo)
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") . |
void |
setNormalSlugParameter1(double normalSlugParameter1)
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard") . |
void |
setNormalSlugParameter2(double normalSlugParameter2)
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard") . |
void |
setNormalSlugParameter3(double normalSlugParameter3)
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard") . |
void |
setNormalSlugParameter4(double normalSlugParameter4)
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard") . |
void |
setParentPartName(String parentPartName)
License requirements: None. |
void |
setPosition(DieCavityAndSlugHoleBuilder.InsertPositionItems position)
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard") . |
void |
setSelectOffsetSpreadsheet(String filename)
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") . |
void |
setShimHeight(double shimHeight)
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") . |
void |
setShimOffset(double shimOffset)
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") . |
void |
setSlugPreviousParameterA(double slugPreviousParameterA)
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard") . |
void |
setSlugPreviousParameterC1(double slugPreviousParameterC1)
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard") . |
void |
setSlugPreviousParameterC2(double slugPreviousParameterC2)
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard") . |
void |
setSpacerAngle(double spacerAngle)
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") . |
void |
setSpacerOffset(double spacerOffset)
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") . |
void |
setWaferHeight(double waferHeight)
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") . |
double |
shimHeight()
Returns the shim height
License requirements: None. |
double |
shimOffset()
Returns the shim offset
License requirements: None. |
Expression |
slugHoleHeightLinearDimension()
Returns the slug hole height linear dimension
License requirements: None. |
double |
slugPreviousParameterA()
Returns the previous slug parameter A
License requirements: None. |
double |
slugPreviousParameterC1()
Returns the previous slug parameter C1
License requirements: None. |
double |
slugPreviousParameterC2()
Returns the previous slug parameter C2
License requirements: None. |
double |
spacerAngle()
Returns the spacer angle
License requirements: None. |
double |
spacerOffset()
Returns the spacer offset
License requirements: None. |
double |
waferHeight()
Returns the wafer height
License requirements: None. |
commit, destroy, getCommittedObjects, getObject, showResults
printTestData, printTestData, tag, tagValue
validate
SelectBodyList selectScrap() throws NXException, RemoteException
NXException
RemoteException
DieCavityAndSlugHoleBuilder.InsertPositionItems position() throws NXException, RemoteException
NXException
RemoteException
void setPosition(DieCavityAndSlugHoleBuilder.InsertPositionItems position) throws NXException, RemoteException
position
- NXException
RemoteException
DieCavityAndSlugHoleBuilder.CavityTypeItems normalCavity() throws NXException, RemoteException
NXException
RemoteException
void setNormalCavity(DieCavityAndSlugHoleBuilder.CavityTypeItems normalCavity) throws NXException, RemoteException
normalCavity
- NXException
RemoteException
double normalSlugParameter1() throws NXException, RemoteException
NXException
RemoteException
void setNormalSlugParameter1(double normalSlugParameter1) throws NXException, RemoteException
normalSlugParameter1
- NXException
RemoteException
double normalSlugParameter2() throws NXException, RemoteException
NXException
RemoteException
void setNormalSlugParameter2(double normalSlugParameter2) throws NXException, RemoteException
normalSlugParameter2
- NXException
RemoteException
double normalSlugParameter3() throws NXException, RemoteException
NXException
RemoteException
void setNormalSlugParameter3(double normalSlugParameter3) throws NXException, RemoteException
normalSlugParameter3
- NXException
RemoteException
double normalSlugParameter4() throws NXException, RemoteException
NXException
RemoteException
void setNormalSlugParameter4(double normalSlugParameter4) throws NXException, RemoteException
normalSlugParameter4
- NXException
RemoteException
Expression slugHoleHeightLinearDimension() throws NXException, RemoteException
NXException
RemoteException
Expression offsetLinearDimension() throws NXException, RemoteException
NXException
RemoteException
DieCavityAndSlugHoleBuilder.DieInsertStackType dieInsertStack() throws NXException, RemoteException
NXException
RemoteException
void setDieInsertStack(DieCavityAndSlugHoleBuilder.DieInsertStackType dieInsertStack) throws NXException, RemoteException
dieInsertStack
- NXException
RemoteException
double spacerOffset() throws NXException, RemoteException
NXException
RemoteException
void setSpacerOffset(double spacerOffset) throws NXException, RemoteException
spacerOffset
- NXException
RemoteException
double spacerAngle() throws NXException, RemoteException
NXException
RemoteException
void setSpacerAngle(double spacerAngle) throws NXException, RemoteException
spacerAngle
- NXException
RemoteException
double waferHeight() throws NXException, RemoteException
NXException
RemoteException
void setWaferHeight(double waferHeight) throws NXException, RemoteException
waferHeight
- NXException
RemoteException
double shimOffset() throws NXException, RemoteException
NXException
RemoteException
void setShimOffset(double shimOffset) throws NXException, RemoteException
shimOffset
- NXException
RemoteException
double shimHeight() throws NXException, RemoteException
NXException
RemoteException
void setShimHeight(double shimHeight) throws NXException, RemoteException
shimHeight
- NXException
RemoteException
double diePlateTwo() throws NXException, RemoteException
NXException
RemoteException
void setDiePlateTwo(double diePlateTwo) throws NXException, RemoteException
diePlateTwo
- NXException
RemoteException
double angleDiePlateTwo() throws NXException, RemoteException
NXException
RemoteException
void setAngleDiePlateTwo(double angleDiePlateTwo) throws NXException, RemoteException
angleDiePlateTwo
- NXException
RemoteException
double diePlateThree() throws NXException, RemoteException
NXException
RemoteException
void setDiePlateThree(double diePlateThree) throws NXException, RemoteException
diePlateThree
- NXException
RemoteException
DieCavityAndSlugHoleBuilder.DiePlateTwoSlugType normalSlugInDiePlateTwo() throws NXException, RemoteException
NXException
RemoteException
void setNormalSlugInDiePlateTwo(DieCavityAndSlugHoleBuilder.DiePlateTwoSlugType normalSlugInDiePlateTwo) throws NXException, RemoteException
normalSlugInDiePlateTwo
- NXException
RemoteException
boolean forEachScrapDiePlateTwo() throws NXException, RemoteException
NXException
RemoteException
void setForEachScrapDiePlateTwo(boolean forEachScrapDiePlateTwo) throws NXException, RemoteException
forEachScrapDiePlateTwo
- NXException
RemoteException
DieCavityAndSlugHoleBuilder.DiePlateThreeSlugType normalSlugInDiePlateThree() throws NXException, RemoteException
NXException
RemoteException
void setNormalSlugInDiePlateThree(DieCavityAndSlugHoleBuilder.DiePlateThreeSlugType normalSlugInDiePlateThree) throws NXException, RemoteException
normalSlugInDiePlateThree
- NXException
RemoteException
boolean forEachScrapDiePlateThree() throws NXException, RemoteException
NXException
RemoteException
void setForEachScrapDiePlateThree(boolean forEachScrapDiePlateThree) throws NXException, RemoteException
forEachScrapDiePlateThree
- NXException
RemoteException
DieCavityAndSlugHoleBuilder.BottomPlateSlugItems normalBottomBackPlateSlug() throws NXException, RemoteException
NXException
RemoteException
void setNormalBottomBackPlateSlug(DieCavityAndSlugHoleBuilder.BottomPlateSlugItems normalBottomBackPlateSlug) throws NXException, RemoteException
normalBottomBackPlateSlug
- NXException
RemoteException
boolean normalForEachScrap1() throws NXException, RemoteException
NXException
RemoteException
void setNormalForEachScrap1(boolean normalForEachScrap1) throws NXException, RemoteException
normalForEachScrap1
- NXException
RemoteException
DieCavityAndSlugHoleBuilder.DieShoeSlugTypeItems normalDieShoeSlug() throws NXException, RemoteException
NXException
RemoteException
void setNormalDieShoeSlug(DieCavityAndSlugHoleBuilder.DieShoeSlugTypeItems normalDieShoeSlug) throws NXException, RemoteException
normalDieShoeSlug
- NXException
RemoteException
boolean normalForEachScrap2() throws NXException, RemoteException
NXException
RemoteException
void setNormalForEachScrap2(boolean normalForEachScrap2) throws NXException, RemoteException
normalForEachScrap2
- NXException
RemoteException
void dieEditOffsetValueTable() throws NXException, RemoteException
NXException
RemoteException
boolean dieSameOffsetValue() throws NXException, RemoteException
NXException
RemoteException
void setDieSameOffsetValue(boolean dieSameOffsetValue) throws NXException, RemoteException
dieSameOffsetValue
- NXException
RemoteException
double dieOffsetValue() throws NXException, RemoteException
NXException
RemoteException
void setDieOffsetValue(double dieOffsetValue) throws NXException, RemoteException
dieOffsetValue
- NXException
RemoteException
SelectSketch selectSketch() throws NXException, RemoteException
NXException
RemoteException
SelectBodyList normalSelectPierceDieInsert() throws NXException, RemoteException
NXException
RemoteException
void normalCreateCavityAndSlug() throws NXException, RemoteException
NXException
RemoteException
DieCavityAndSlugHoleBuilder.ClearanceOptionItems normalClearanceOption() throws NXException, RemoteException
NXException
RemoteException
void setNormalClearanceOption(DieCavityAndSlugHoleBuilder.ClearanceOptionItems normalClearanceOption) throws NXException, RemoteException
normalClearanceOption
- NXException
RemoteException
double normalClearance() throws NXException, RemoteException
NXException
RemoteException
void setNormalClearance(double normalClearance) throws NXException, RemoteException
normalClearance
- NXException
RemoteException
DieCavityAndSlugHoleBuilder.OffsetSideOptionItems normalOffsetSide() throws NXException, RemoteException
NXException
RemoteException
void setNormalOffsetSide(DieCavityAndSlugHoleBuilder.OffsetSideOptionItems normalOffsetSide) throws NXException, RemoteException
normalOffsetSide
- NXException
RemoteException
boolean normalRenameDialog() throws NXException, RemoteException
NXException
RemoteException
void setNormalRenameDialog(boolean normalRenameDialog) throws NXException, RemoteException
normalRenameDialog
- NXException
RemoteException
String parentPartName() throws NXException, RemoteException
NXException
RemoteException
void setParentPartName(String parentPartName) throws NXException, RemoteException
parentPartName
- Specifies the parent part nameNXException
RemoteException
String newPartNames() throws NXException, RemoteException
NXException
RemoteException
void setNewPartNames(String newPartNames) throws NXException, RemoteException
newPartNames
- Specifies the new component namesNXException
RemoteException
String selectOffsetSpreadsheet() throws NXException, RemoteException
NXException
RemoteException
void setSelectOffsetSpreadsheet(String filename) throws NXException, RemoteException
filename
- NXException
RemoteException
double slugPreviousParameterA() throws NXException, RemoteException
NXException
RemoteException
void setSlugPreviousParameterA(double slugPreviousParameterA) throws NXException, RemoteException
slugPreviousParameterA
- NXException
RemoteException
double slugPreviousParameterC1() throws NXException, RemoteException
NXException
RemoteException
void setSlugPreviousParameterC1(double slugPreviousParameterC1) throws NXException, RemoteException
slugPreviousParameterC1
- NXException
RemoteException
double slugPreviousParameterC2() throws NXException, RemoteException
NXException
RemoteException
void setSlugPreviousParameterC2(double slugPreviousParameterC2) throws NXException, RemoteException
slugPreviousParameterC2
- NXException
RemoteException
Copyright 2017 Siemens Product Lifecycle Management Software Inc. All Rights Reserved.