nxopen.pid

Interface PreferencesConnectionBuilder

All Superinterfaces:

IComponentBuilder, Remote, TaggedObject

public interface PreferencesConnectionBuilder
extends TaggedObject, IComponentBuilder

Represents a PreferencesConnectionBuilder .
Created in NX11.0.1

Method Summary

Modifier and Type	Method and Description
boolean	allowNonOrthogonalConnections() Returns the allow non-orthogonal connections.
double	arrowSize() Returns the arrow size.
DiagrammingFlowdirectionarrowstyle	arrowStyle() Returns the arrow style.
double	jumperGap() Returns the jumper gap.
DiagrammingJumperprioritytype	jumperPriority() Returns the jumper priority type.
boolean	jumperPriorityUseLineType() Returns the jumper priority use line type.
DiagrammingJumpertype	jumperType() Returns the jumper type.
double	minimumSegmentLength() Returns the minimum segment length.
void	setAllowNonOrthogonalConnections(boolean allowNonOrthogonal) License requirements: nx_pid_design_author ("NX P and ID Design Author") .
void	setArrowSize(double size) License requirements: nx_pid_design_author ("NX P and ID Design Author") .
void	setArrowStyle(DiagrammingFlowdirectionarrowstyle style) License requirements: nx_pid_design_author ("NX P and ID Design Author") .
void	setJumperGap(double gap) License requirements: nx_pid_design_author ("NX P and ID Design Author") .
void	setJumperPriority(DiagrammingJumperprioritytype jumperPriorityType) License requirements: nx_pid_design_author ("NX P and ID Design Author") .
void	setJumperPriorityUseLineType(boolean useLineType) License requirements: nx_pid_design_author ("NX P and ID Design Author") .
void	setJumperType(DiagrammingJumpertype jumperType) License requirements: nx_pid_design_author ("NX P and ID Design Author") .
void	setMinimumSegmentLength(double length) License requirements: nx_pid_design_author ("NX P and ID Design Author") .
void	setSnapAngle(double angle) License requirements: nx_pid_design_author ("NX P and ID Design Author") .
void	setTeeSize(double size) License requirements: nx_pid_design_author ("NX P and ID Design Author") .
double	snapAngle() Returns the snap angle License requirements: nx_pid_design_reader ("NX P and ID Design Reader") OR nx_pid_design_author ("NX P and ID Design Author") .
double	teeSize() Returns the tee size.

Methods inherited from interface nxopen.TaggedObject

printTestData, printTestData, tag, tagValue

Methods inherited from interface nxopen.geometricutilities.IComponentBuilder

validate

Method Detail

allowNonOrthogonalConnections

boolean allowNonOrthogonalConnections()
                               throws NXException,
                                      RemoteException

Returns the allow non-orthogonal connections.
License requirements: nx_pid_design_reader ("NX P and ID Design Reader") OR nx_pid_design_author ("NX P and ID Design Author")

Created in NX11.0.1

Throws:

NXException

RemoteException

setAllowNonOrthogonalConnections

void setAllowNonOrthogonalConnections(boolean allowNonOrthogonal)
                               throws NXException,
                                      RemoteException

License requirements: nx_pid_design_author ("NX P and ID Design Author")
.
Created in NX11.0.1

Parameters:

allowNonOrthogonal -

Throws:

NXException

RemoteException

minimumSegmentLength

double minimumSegmentLength()
                     throws NXException,
                            RemoteException

Returns the minimum segment length.
License requirements: nx_pid_design_reader ("NX P and ID Design Reader") OR nx_pid_design_author ("NX P and ID Design Author")

Created in NX11.0.1

Throws:

NXException

RemoteException

setMinimumSegmentLength

void setMinimumSegmentLength(double length)
                      throws NXException,
                             RemoteException

License requirements: nx_pid_design_author ("NX P and ID Design Author")
.
Created in NX11.0.1

Parameters:

length -

Throws:

NXException

RemoteException

jumperType

DiagrammingJumpertype jumperType()
                          throws NXException,
                                 RemoteException

Returns the jumper type.
License requirements: nx_pid_design_reader ("NX P and ID Design Reader") OR nx_pid_design_author ("NX P and ID Design Author")

Created in NX11.0.1

Throws:

NXException

RemoteException

setJumperType

void setJumperType(DiagrammingJumpertype jumperType)
            throws NXException,
                   RemoteException

License requirements: nx_pid_design_author ("NX P and ID Design Author")
.
Created in NX11.0.1

Parameters:

jumperType -

Throws:

NXException

RemoteException

jumperGap

double jumperGap()
          throws NXException,
                 RemoteException

Returns the jumper gap.
License requirements: nx_pid_design_reader ("NX P and ID Design Reader") OR nx_pid_design_author ("NX P and ID Design Author")

Created in NX11.0.1

Throws:

NXException

RemoteException

setJumperGap

void setJumperGap(double gap)
           throws NXException,
                  RemoteException

License requirements: nx_pid_design_author ("NX P and ID Design Author")
.
Created in NX11.0.1

Parameters:

gap -

Throws:

NXException

RemoteException

jumperPriorityUseLineType

boolean jumperPriorityUseLineType()
                           throws NXException,
                                  RemoteException

Returns the jumper priority use line type.
License requirements: nx_pid_design_reader ("NX P and ID Design Reader") OR nx_pid_design_author ("NX P and ID Design Author")

Created in NX11.0.1

Throws:

NXException

RemoteException

setJumperPriorityUseLineType

void setJumperPriorityUseLineType(boolean useLineType)
                           throws NXException,
                                  RemoteException

License requirements: nx_pid_design_author ("NX P and ID Design Author")
.
Created in NX11.0.1

Parameters:

useLineType -

Throws:

NXException

RemoteException

jumperPriority

DiagrammingJumperprioritytype jumperPriority()
                                      throws NXException,
                                             RemoteException

Returns the jumper priority type.
License requirements: nx_pid_design_reader ("NX P and ID Design Reader") OR nx_pid_design_author ("NX P and ID Design Author")

Created in NX11.0.1

Throws:

NXException

RemoteException

setJumperPriority

void setJumperPriority(DiagrammingJumperprioritytype jumperPriorityType)
                throws NXException,
                       RemoteException

License requirements: nx_pid_design_author ("NX P and ID Design Author")
.
Created in NX11.0.1

Parameters:

jumperPriorityType -

Throws:

NXException

RemoteException

snapAngle

double snapAngle()
          throws NXException,
                 RemoteException

Returns the snap angle
License requirements: nx_pid_design_reader ("NX P and ID Design Reader") OR nx_pid_design_author ("NX P and ID Design Author")
.
Created in NX11.0.1

Throws:

NXException

RemoteException

setSnapAngle

void setSnapAngle(double angle)
           throws NXException,
                  RemoteException

License requirements: nx_pid_design_author ("NX P and ID Design Author")
.
Created in NX11.0.1

Parameters:

angle -

Throws:

NXException

RemoteException

arrowStyle

DiagrammingFlowdirectionarrowstyle arrowStyle()
                                       throws NXException,
                                              RemoteException

Returns the arrow style.
License requirements: nx_pid_design_reader ("NX P and ID Design Reader") OR nx_pid_design_author ("NX P and ID Design Author")

Created in NX11.0.1

Throws:

NXException

RemoteException

setArrowStyle

void setArrowStyle(DiagrammingFlowdirectionarrowstyle style)
            throws NXException,
                   RemoteException

License requirements: nx_pid_design_author ("NX P and ID Design Author")
.
Created in NX11.0.1

Parameters:

style -

Throws:

NXException

RemoteException

arrowSize

double arrowSize()
          throws NXException,
                 RemoteException

Returns the arrow size.
License requirements: nx_pid_design_reader ("NX P and ID Design Reader") OR nx_pid_design_author ("NX P and ID Design Author")

Created in NX11.0.1

Throws:

NXException

RemoteException

setArrowSize

void setArrowSize(double size)
           throws NXException,
                  RemoteException

License requirements: nx_pid_design_author ("NX P and ID Design Author")
.
Created in NX11.0.1

Parameters:

size -

Throws:

NXException

RemoteException

teeSize

double teeSize()
        throws NXException,
               RemoteException

Returns the tee size.
License requirements: nx_pid_design_reader ("NX P and ID Design Reader") OR nx_pid_design_author ("NX P and ID Design Author")

Created in NX11.0.1

Throws:

NXException

RemoteException

setTeeSize

void setTeeSize(double size)
         throws NXException,
                RemoteException

License requirements: nx_pid_design_author ("NX P and ID Design Author")
.
Created in NX11.0.1

Parameters:

size -

Throws:

NXException

RemoteException