- D - Static variable in class nxopen.ame.InterruptionPointBuilder.Variant
-
- d() - Method in interface nxopen.annotations.DraftingSurfaceFinishBuilder
-
Returns the d
License requirements: None.
- D - Static variable in class nxopen.annotations.LineWeldDataBuilder.WeldSizeCodeType
-
- D - Static variable in class nxopen.annotations.SizeLetterCode
-
Specifies size letter code "d"
- d() - Method in interface nxopen.annotations.SurfaceFinishBuilder
-
Returns the d
License requirements: None.
- D - Static variable in class nxopen.cae.DurabilityDamageEvaluationBuilder.BwiWeldClassEnum
-
D
- D - Static variable in class nxopen.cae.DurabilityEventFatigueSettingsBuilder.BwiWeldClassEnum
-
D
- D - Static variable in class nxopen.cae.FemSignalProcessingSignalAttributes.AcousticalWeightings
-
D
- D - Static variable in class nxopen.cae.responsesimulation.DataLocation.Beam
-
- D - Static variable in class nxopen.cae.responsesimulation.ElementalFunctionEvalBeamLocation
-
- D - Static variable in class nxopen.cae.responsesimulation.NodalFunctionEvalBeamLocation
-
Stress Recovery point D on a beam cross section
- D - Static variable in class nxopen.cae.SignalProcessingPlotData.AcousticalWeighting
-
D
- D - Static variable in class nxopen.cae.SimLoadRecipeFunctionAttributes.AcousticalWeightings
-
D
- D - Static variable in class nxopen.cam.TurnToolBuilder.HolderStyles
-
D-Style
- D - Static variable in class nxopen.drawings.DrawingSheet.StandardSheetSize
-
22 X 34 inches
- d1() - Method in interface nxopen.features.vehicledesign.HeadImpactUpperRoofDetailBuilder
-
Returns the calculated horizontal distance between plane A and plane B.
- D15 - Static variable in class nxopen.cam.TurnToolBuilder.ReliefAngleTypes
-
Relief angle type: D (15)
- d2() - Method in interface nxopen.features.vehicledesign.HeadImpactUpperRoofDetailBuilder
-
Returns the calculated horizontal distance between plane C and plane D.
- DAMAGE - Static variable in class nxopen.cae.Result.Quantity
-
- DAMAGE_EQ - Static variable in class nxopen.cae.Result.Quantity
-
- DAMAGEINTERFACE - Static variable in class nxopen.PhysicalMaterial.Type
-
Damage interface material
- DAMPED_SINUSOID - Static variable in class nxopen.cae.AfuMathOperation.SrsToTimeOption
-
Damped sinusoid method
- DAMPER - Static variable in class nxopen.cae.connections.ConnectionType
-
Damper
- Damper - Interface in nxopen.cae.connections
-
Damper connection.
- Damper - Interface in nxopen.motion
-
Represents a damper
To create or edit an instance of this class, use
DamperBuilder
Created in NX6.0.0
- damperAppDirection() - Method in interface nxopen.motion.DamperBuilder
-
Returns the application direction
License requirements: None.
- damperAppDirection() - Method in interface nxopen.motion.SpringBuilder
-
Returns the application direction of damper
License requirements: None.
- DamperBuilder - Interface in nxopen.motion
-
- DamperCollection - Interface in nxopen.motion
-
Represents a collection of motion damper
To obtain an instance of this class, refer to
MotionManager
Created in NX6.0.0
- damperCustomizedSolver() - Method in interface nxopen.motion.DamperBuilder
-
Returns the option of using Customized Solver
License requirements: None.
- damperCustomizedSolver() - Method in interface nxopen.motion.SpringBuilder
-
Returns the option of using Customized Solver for damper
License requirements: None.
- DamperEADBuilder - Interface in nxopen.cae
-
- DamperEADBuilder.RotationalComponentEnd - Class in nxopen.cae
-
indicates which rotational degree of freedom to use as component end
- DamperEADBuilder.State - Class in nxopen.cae
-
indicates to apply or clear the viscous damping property upon commit
- DamperEADBuilder.TranslationalComponentEnd - Class in nxopen.cae
-
indicates which translational degree of freedom to use as component end
- damperName() - Method in interface nxopen.motion.SpringBuilder
-
Returns the damper dname
License requirements: None.
- dampers() - Method in interface nxopen.motion.MotionManager
-
- damping() - Method in interface nxopen.cae.AfuOrdinateHeaderInfo
-
Returns the damping value
License requirements: None.
- DAMPING - Static variable in class nxopen.cae.XyFunctionMeasure
-
Damping
- damping() - Method in interface nxopen.mechatronics.AngularSpringJointBuilder
-
Returns the damping.
- damping() - Method in interface nxopen.mechatronics.LinearSpringJointBuilder
-
Returns the damping.
- damping() - Method in interface nxopen.mechatronics.SpringDamperBuilder
-
Returns the damping.
- DAMPING - Static variable in class nxopen.motion.BushingCylindricalCoefficientTypes
-
damping type
- DAMPING - Static variable in class nxopen.motion.BushingSphericalCoefficientTypes
-
damping type
- DAMPING_BF_IN - Static variable in class nxopen.cae.XyFunctionUnit
-
Damping unit: lbf-secin
- DAMPING_CN_CM - Static variable in class nxopen.cae.XyFunctionUnit
-
Damping unit: cN-sec/cm
- DAMPING_KG_SEC - Static variable in class nxopen.cae.XyFunctionUnit
-
Damping unit: kg/sec
- DAMPING_KGF_CM - Static variable in class nxopen.cae.XyFunctionUnit
-
Damping unit: kgf-sec/cm
- DAMPING_KGF_M - Static variable in class nxopen.cae.XyFunctionUnit
-
Damping unit: kgf-sec/m
- DAMPING_KGF_MM - Static variable in class nxopen.cae.XyFunctionUnit
-
Damping unit: kgf-sec/mm
- DAMPING_LBM_SEC - Static variable in class nxopen.cae.XyFunctionUnit
-
Damping unit: lbm/sec
- DAMPING_MN_MM - Static variable in class nxopen.cae.XyFunctionUnit
-
Damping unit: mN-sec/mm
- DAMPING_NM - Static variable in class nxopen.cae.XyFunctionUnit
-
Damping unit: N-sec/m
- DAMPING_NMM - Static variable in class nxopen.cae.XyFunctionUnit
-
Damping unit: N-sec/mm
- dampingCoefficient() - Method in interface nxopen.motion.PMDCMotorBuilder
-
Returns the damping coefficient
License requirements: nx_motion_motor ("NX Motion Motor")
.
- dampingCoefficients() - Method in interface nxopen.motion.BushingCylindricalCoefficients
-
Returns the damping coefficients.
- dampingCoefficients() - Method in interface nxopen.motion.BushingGeneralCoefficients
-
- dampingCoefficients() - Method in interface nxopen.motion.BushingSphericalCoefficients
-
Returns the damping coefficients.
- dampingCurve() - Method in interface nxopen.motion.AnalyticalContactPropertyBuilder
-
Returns the damping function
License requirements: None.
- dampingFactor() - Method in interface nxopen.cae.LaminateDampingFactorBuilder
-
Returns the damping factor
License requirements: None.
- dampingOption() - Method in interface nxopen.motion.AnalyticalContactPropertyBuilder
-
Returns the damping type.
- dampingProfile() - Method in interface nxopen.motion.AnalyticalContactPropertyBuilder
-
Returns the damping Profile.
- dampingRate - Variable in class nxopen.uf.UFMotion.SpringDamper
-
- dampingRatio - Variable in class nxopen.cae.ModeSet.ModeByIndexData
-
the damping ratio of the mode
- dampingRatio() - Method in interface nxopen.cae.PreTestExciterConfigBuilder
-
Returns the damping ratio
License requirements: None.
- dampingRatio() - Method in interface nxopen.motion.BeamForceBuilder
-
Returns the damping ratio
License requirements: mechanisms ("MECHANISMS")
.
- dampingRatio() - Method in interface nxopen.motion.SplineBeamPropertyBuilder
-
Returns the damping ratio
License requirements: mechanisms ("MECHANISMS")
.
- dampingType() - Method in interface nxopen.motion.BeamForceBuilder
-
Returns the damping method
License requirements: mechanisms ("MECHANISMS")
.
- dampingType() - Method in interface nxopen.motion.SplineBeamPropertyBuilder
-
Returns the damping method
License requirements: mechanisms ("MECHANISMS")
.
- dampingValue() - Method in interface nxopen.motion.AnalyticalContactPropertyBuilder
-
Returns the damping value
License requirements: mechanisms ("MECHANISMS")
.
- DANG_VAN - Static variable in class nxopen.cae.DurabilityEventFatigueSettingsBuilder.FatigueSafetyFactorOutputEnum
-
Dang Van
- DAOConstraint - Interface in nxopen.cae.optimization
-
- DAOConstraintBuilder - Interface in nxopen.cae.optimization
-
- DAOConstraintCollection - Interface in nxopen.cae.optimization
-
Represents the collection of optimization solution design constraint
To obtain an instance of this class, refer to
DAOSolution
Created in NX8.0.0
- DAODesignVariable - Interface in nxopen.cae.optimization
-
- DAODesignVariableBuilder - Interface in nxopen.cae.optimization
-
- DAODesignVariableBuilder.Variable - Class in nxopen.cae.optimization
-
Represents the design variable type
- DAODesignVariableBuilder.VariableData - Class in nxopen.cae.optimization
-
- DAODesignVariableCollection - Interface in nxopen.cae.optimization
-
Represents the collection of optimization solution design variable
To obtain an instance of this class, refer to
DAOSolution
Created in NX8.0.0
- DAOObjective - Interface in nxopen.cae.optimization
-
- DAOOptimizationManager - Interface in nxopen.cae.optimization
-
Represents the Design and Analysis optimization manager that contains all optimization objects.
- DAOSolution - Interface in nxopen.cae.optimization
-
- DAOSolutionBuilder - Interface in nxopen.cae.optimization
-
- DAOSolutionCollection - Interface in nxopen.cae.optimization
-
Represents the collection of optimization solution
To obtain an instance of this class, refer to
DAOOptimizationManager
Created in NX8.0.0
- DAOStopCondition - Interface in nxopen.cae.optimization
-
- DARK_AZURE_BLUE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DARK_AZURE_CYAN_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DARK_BLUE_AZURE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DARK_BLUE_VIOLET_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DARK_CYAN_AZURE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DARK_CYAN_TEAL_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DARK_DULL_AZURE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DARK_DULL_BLUE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DARK_DULL_CYAN_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DARK_DULL_GREEN_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DARK_DULL_MAGENTA_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DARK_DULL_ORANGE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DARK_DULL_PINK_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DARK_DULL_RED_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DARK_DULL_SPRING_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DARK_DULL_TEAL_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DARK_DULL_VIOLET_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DARK_DULL_YELLOW_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DARK_FADED_BLUE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DARK_FADED_CYAN_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DARK_FADED_GREEN_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DARK_FADED_MAGENTA_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DARK_FADED_RED_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DARK_FADED_YELLOW_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DARK_GRADUATED - Static variable in class nxopen.display.TrueShadingBuilder.BgdType
-
Graduated dark colored background
- DARK_GRAY_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DARK_GREEN_SPRING_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DARK_GREEN_TEAL_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DARK_HARD_AZURE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DARK_HARD_BLUE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DARK_HARD_CYAN_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DARK_HARD_GREEN_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DARK_HARD_MAGENTA_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DARK_HARD_ORANGE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DARK_HARD_PINK_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DARK_HARD_RED_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DARK_HARD_SPRING_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DARK_HARD_TEAL_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DARK_HARD_VIOLET_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DARK_HARD_YELLOW_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DARK_MAGENTA_PINK_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DARK_MAGENTA_VIOLET_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DARK_ORANGE_RED_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DARK_ORANGE_YELLOW_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DARK_PINK_MAGENTA_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DARK_PINK_RED_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DARK_RED_ORANGE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DARK_RED_PINK_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DARK_SPRING_GREEN_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DARK_SPRING_YELLOW_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DARK_TEAL_CYAN_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DARK_TEAL_GREEN_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DARK_VIOLET_BLUE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DARK_VIOLET_MAGENTA_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DARK_WEAK_BLUE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DARK_WEAK_CYAN_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DARK_WEAK_GREEN_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DARK_WEAK_MAGENTA_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DARK_WEAK_RED_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DARK_WEAK_YELLOW_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DARK_YELLOW_ORANGE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DARK_YELLOW_SPRING_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DASH - Static variable in class nxopen.annotations.TableCellStyleBuilder.ZeroDisplayType
-
- DASH - Static variable in class nxopen.diagramming.tables.ZeroDisplay
-
Dash filled display
- dashboard() - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarWizardBuilder
-
Returns the dashboard geometry.
- DASHED - Static variable in class nxopen.annotations.EditSymbolDisplayBuilder.FontTypes
-
Dashed Type
- DASHED - Static variable in class nxopen.assemblies.ProductOutlineBuilder.LineFont
-
Dashed Line
- DASHED - Static variable in class nxopen.cae.ModelDisplayBuilder.FreeEdgeFont
-
Dashed font
- DASHED - Static variable in class nxopen.cae.ModelDisplayBuilder.RotationAxisLineFont
-
Dashed font
- DASHED - Static variable in class nxopen.cae.ModelDisplayBuilder.StitchedEdgeFont
-
Dashed font
- DASHED - Static variable in class nxopen.display.GridBuilder.LineStyleType
-
- DASHED - Static variable in class nxopen.DisplayableObject.ObjectFont
-
- DASHED - Static variable in class nxopen.drawings.CustomViewSettingsBuilder.Font
-
Dashed
- DASHED - Static variable in class nxopen.drawings.DrawingCompareSettingsBuilder.FontType
-
Deprecated.
- DASHED - Static variable in class nxopen.drawings.SectionLineStyleBuilder.FontStyle
-
Deprecated.
- DASHED - Static variable in class nxopen.features.vehicledesign.PedestrianProtectionBuilder.Font
-
Dashed Font
- DASHED - Static variable in class nxopen.fields.DisplayPropertiesBuilder.LineFontEnum
-
Dashed
- DASHED - Static variable in class nxopen.LineFontBuilder.LineFontType
-
Dashed line font
- DASHED - Static variable in class nxopen.preferences.Font
-
Dashed
- DASHED - Static variable in class nxopen.preferences.PartDrafting.FontType
-
Dashed
- DASHED - Static variable in class nxopen.preferences.PartModeling.GridKnotLineFontType
-
- DASHED - Static variable in class nxopen.preferences.PartObject.LineFontType
-
Dashed
- DASHED - Static variable in class nxopen.preferences.PartVisualizationShade.HiddenShadedFaceEdges
-
If selected, hidden shaded face edges are
displayed in the body color with a dashed line
font.
- DASHED - Static variable in class nxopen.preferences.SessionModeling.PolylineStyleType
-
- DASHED - Static variable in class nxopen.preferences.ViewVisualizationVisual.HiddenEdges
-
- DASHED - Static variable in class nxopen.preferences.ViewVisualizationVisual.HiddenEdgeStyleType
-
- DASHED - Static variable in class nxopen.preferences.ViewVisualizationVisual.HiddenEdgesType
-
Deprecated.
grid line display of all existing and subsequently
created solid bodies in the selected view, except
that all portions of the geometry and text that
appear behind solid bodies are displayed as dashed
lines
- DASHED - Static variable in class nxopen.preferences.ViewVisualizationVisual.SmoothEdgeFont
-
- DASHED - Static variable in class nxopen.ViewDependentDisplayManager.Font
-
- DASHED_CENTER - Static variable in class nxopen.cam.DisplayPath.PathDisplayTypes
-
Path Display: Dashed Center
- DASHED_CENTER - Static variable in class nxopen.cam.OperationDisplayOptionsBuilder.PathDisplayTypes
-
Path Display: Dashed Center
- dashSize() - Method in interface nxopen.preferences.PartVisualizationLine
-
Returns the dash size.
- dashSize - Variable in class nxopen.uf.UFDisp.SystemParams
-
- dashSurface() - Method in interface nxopen.features.vehicledesign.ReflectionDataBuilder
-
Returns the reflected object is in the dash surface
License requirements: None.
- dat - Variable in class nxopen.uf.UFPd.AttributeValueData
-
- dat - Variable in class nxopen.uf.UFPd.AttributeValueData2
-
- Data() - Constructor for class nxopen.ApparentChainingRule.Data
-
- Data() - Constructor for class nxopen.BrushFacetsRule.Data
-
- Data() - Constructor for class nxopen.cae.AfuMathFastRMSInfo.Data
-
- Data() - Constructor for class nxopen.cam.FormEdgesBuilder.Data
-
- Data() - Constructor for class nxopen.cam.HolderSectionBuilder.Data
-
- Data() - Constructor for class nxopen.cam.MillingTrackpointBuilder.Data
-
- Data() - Constructor for class nxopen.cam.MultipleStepoverBuilder.Data
-
- Data() - Constructor for class nxopen.cam.StepParamsBuilder.Data
-
- Data() - Constructor for class nxopen.cam.TrackingBuilder.Data
-
- Data() - Constructor for class nxopen.cam.UdtSectionBuilder.Data
-
- Data() - Constructor for class nxopen.CurveChainRule.Data
-
- Data() - Constructor for class nxopen.CurveFeatureChainRule.Data
-
- Data() - Constructor for class nxopen.CurveFeatureTangentRule.Data
-
- Data() - Constructor for class nxopen.CurveTangentRule.Data
-
- Data() - Constructor for class nxopen.EdgeChainRule.Data
-
- Data() - Constructor for class nxopen.EdgeIntersectRule.Data
-
- Data() - Constructor for class nxopen.EdgeMultipleSeedTangentRule.Data
-
- Data() - Constructor for class nxopen.EdgeTangentRule.Data
-
- Data() - Constructor for class nxopen.EdgeVertexRule.Data
-
- Data() - Constructor for class nxopen.EdgeVertexTangentRule.Data
-
- Data() - Constructor for class nxopen.FaceMergedRibFacesRule.Data
-
- Data() - Constructor for class nxopen.FaceRegionBoundaryRule.Data
-
- Data() - Constructor for class nxopen.FaceTangentRule.Data
-
- Data() - Constructor for class nxopen.FineBrushFacetsRule.Data
-
- Data() - Constructor for class nxopen.FloodFillFacetsRule.Data
-
- Data() - Constructor for class nxopen.FollowFilletRule.Data
-
- Data() - Constructor for class nxopen.HumanReachZone.Data
-
- Data() - Constructor for class nxopen.RegionBoundaryRule.Data
-
- Data() - Constructor for class nxopen.RoughBrushFacetsRule.Data
-
- Data() - Constructor for class nxopen.SectionElementData.Data
-
- data - Variable in class nxopen.uf.UFGdt.AskUnitBasisData
-
- data - Variable in class nxopen.uf.UFModeling.AskObjDimensionalityData
-
- data - Variable in class nxopen.uf.UFModeling.IntersectCurveToCurveData
-
- data - Variable in class nxopen.uf.UFModeling.IntersectCurveToFaceData
-
- data - Variable in class nxopen.uf.UFModeling.IntersectCurveToPlaneData
-
- DATA_COMPONENT - Static variable in class nxopen.cae.responsesimulation.NodalFunctionEvalRequest
-
- DATA_ELEMENTS - Static variable in class nxopen.cae.AlternateFemRepresentationSource.CreateMeshMode
-
create data elements
- DATA_SOURCE - Static variable in class nxopen.cae.SimLoadRecipeMapping.OrientationTypes
-
- database() - Method in interface nxopen.features.HumanBuilder
-
Returns the database for human
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- database() - Method in interface nxopen.HumanHandsDialogBuilder
-
Returns the database
License requirements: ug_human ("Human Modelling")
.
- DatabaseAttributeManager - Interface in nxopen.pdm
-
This class is responsible for setting and getting NX Manager database attribute.
- DatabaseObject - Interface in nxopen.pdm
-
Represents a Teamcenter database object .
- DatabaseObjectManager - Interface in nxopen.pdm
-
This class is used for retrieving PDM database objects.
- DatabaseObjects - Interface in nxopen.pdm
-
- DATABLOCK - Static variable in class nxopen.mechatronics.PlcSimAdvClientBuilder.AreaType
-
DataBlock
- dataCharx - Variable in class nxopen.preferences.RoutingStock.DefaultStockData
-
The list of optional and required characteristics to apply to the new stock.
- dataComponent() - Method in interface nxopen.cae.responsesimulation.ElementalFunctionEvaluationSettingBuilder
-
Returns the data component of direction
License requirements: nx_response_anlys ("NX Response Analysis")
.
- dataComponent() - Method in interface nxopen.cae.responsesimulation.NodalFunctionEvaluationSettingBuilder
-
Returns the direction data component
License requirements: nx_response_anlys ("NX Response Analysis")
.
- dataComponent() - Method in interface nxopen.cae.responsesimulation.StrainGageEvaluationSettingBuilder
-
Returns the data component of strain gage evaluation results
License requirements: nx_response_anlys ("NX Response Analysis")
.
- DataContainer - Interface in nxopen
-
Represents a list of data.
- dataControl() - Method in interface nxopen.cae.DurabilityTransientEventBuilder
-
Returns the data control.
- dataCount - Variable in class nxopen.cae.FunctionBuilder.MathPlotData
-
- dataDefinition() - Method in interface nxopen.cae.PostScenarioBuilder
-
- dataDefinition() - Method in interface nxopen.features.vehicledesign.BaseDataLoadingBuilder
-
Returns the Data Definition option of loading.
- dataDefinition() - Method in interface nxopen.features.vehicledesign.BaseDataLoadingWheelBuilder
-
Returns the value to indicate which definition option will be used to define the loading wheel data.
- dataDefinitions() - Method in interface nxopen.cae.PostScenarioBuilder
-
- dataerr - Variable in class nxopen.cae.Post.ASCIIDiffTolerances
-
error allowed on data values
- dataFile() - Method in interface nxopen.tooling.ReusePositioningObjectBuilder
-
Returns the imported data file name
License requirements: None.
- dataFormat() - Method in interface nxopen.cae.AfuOrdinateHeaderInfo
-
Returns the data format
License requirements: None.
- dataLengthBit() - Method in interface nxopen.ame.PlcMemoryAreaBuilder
-
Returns the DataLengthBit
License requirements: None.
- dataLengthByte() - Method in interface nxopen.ame.PlcMemoryAreaBuilder
-
Returns the DataLengthByte
License requirements: None.
- DataLocation - Interface in nxopen.cae.responsesimulation
-
Represents the data location to perform evaluation .
- dataLocation() - Method in interface nxopen.cae.responsesimulation.ModalResultsEvaluationSettingBuilder
-
Returns the frequency setting
License requirements: nx_response_anlys ("NX Response Analysis")
.
- dataLocation() - Method in interface nxopen.cae.responsesimulation.StrengthResultsEvaluationSettingBuilder
-
Returns the setting of combination evaluation
License requirements: nx_response_anlys ("NX Response Analysis")
.
- DataLocation.Beam - Class in nxopen.cae.responsesimulation
-
Specifies the location for beam
- DataLocation.Element - Class in nxopen.cae.responsesimulation
-
Specifies the element location for element
- DataLocation.Shell - Class in nxopen.cae.responsesimulation
-
Specifies the location for shell
- DataManager - Interface in nxopen.cae.ftk
-
- dataManager() - Method in interface nxopen.Session
-
Returns the
DataManager
belonging to this session
Created in NX7.5.0
- DataManager.AfuRecordZValue - Class in nxopen.cae.ftk
-
Represents the method to get Z value for afu record in 3D plot
- DataManager.FileContainerType - Class in nxopen.cae.ftk
-
Represents the file container type
- dataParams - Variable in class nxopen.cae.Post.Streamline
-
- DataProcessing - Interface in nxopen.cae
-
- DataProcessingBlock - Interface in nxopen.cae
-
- DataProcessingBlockBuilder - Interface in nxopen.cae
-
- DataProcessingBlockCollection - Interface in nxopen.cae
-
Represents a collection of DPM events.
- DataProcessingBuilder - Interface in nxopen.cae
-
Builds a
DataProcessing
object which
represets a data processing meta solution.
- DataProcessingCollection - Interface in nxopen.cae
-
Represents a collection of Data Processing meta solution.
- dataProcessings() - Method in interface nxopen.cae.SimSimulation
-
Returns the Data Processing collection belonging to this sim part .
- dataRange() - Method in interface nxopen.geometricanalysis.DistanceAnalysisBuilder
-
Returns the distance analysis data range.
- dataRange() - Method in interface nxopen.geometricanalysis.RadiusAnalysisBuilder
-
Returns the radius analysis data range.
- dataRange() - Method in interface nxopen.geometricanalysis.SlopeAnalysisBuilder
-
Returns the slope analysis data range.
- dataReferences() - Method in interface nxopen.cae.LayoutStateApplicator
-
- dataSetFile() - Method in interface nxopen.features.shipdesign.AddDataSetBuilder
-
Returns the data set file
License requirements: None.
- datasetName() - Method in interface nxopen.features.vehicledesign.BaseDataImportExportBuilder
-
Returns the name of the Teamcenter dataset from which the spreadsheet is to be imported from or exported to.
- datasetName() - Method in interface nxopen.PrintPDFBuilder
-
Returns the dataset name to be used when Creating a New PDF document in a Teamcenter
environment.
- datasetname - Variable in class nxopen.uf.UFUgmgr.PartFileInfo
-
- datasetname - Variable in class nxopen.uf.UFUgmgr.PartFileObject
-
- dataSets() - Method in interface nxopen.features.shipdesign.ReadDataSetBuilder
-
Returns the index value of the available data set names
License requirements: None.
- datasetType() - Method in interface nxopen.CGMBuilder
-
Returns the dataset type to be used when exporting a CGM to Teamcenter
License requirements: None.
- datasetType() - Method in interface nxopen.PrintPDFBuilder
-
Returns the dataset type to be used when exporting a PDF to Teamcenter
License requirements: None.
- datasettype - Variable in class nxopen.uf.UFUgmgr.PartFileObject
-
- DataSource - Interface in nxopen.cae
-
This is the class representing a scenario data source.
- dataSource() - Method in interface nxopen.cae.PostScenarioBuilderSlot
-
Returns the selected
DataSource
License requirements: None.
- dataSource() - Method in interface nxopen.cae.PostScenarioParameters
-
- dataSource() - Method in interface nxopen.features.shipdesign.ManufacturingStockBuilder
-
Returns the data source from which the intial data is read.
- dataSource() - Method in interface nxopen.validate.Parser
-
Returns the result data source type
License requirements: None.
- DataSourceBuilder - Interface in nxopen.cae
-
- DataSourceCollection - Interface in nxopen.cae
-
- dataSources() - Method in interface nxopen.cae.PostScenarioManager
-
- dataSourceType() - Method in interface nxopen.features.shipdesign.ManufacturingStockBuilder
-
Returns the data source from which the initial data is read.
- DataStructuresUnion() - Constructor for class nxopen.uf.UFSubdiv.DataStructuresUnion
-
- DataStructuresUnion(UFSubdiv.Isocline) - Constructor for class nxopen.uf.UFSubdiv.DataStructuresUnion
-
- datatol - Variable in class nxopen.cae.Post.ASCIIDiffTolerances
-
absolute tolerance on data values
- dataType() - Method in interface nxopen.ame.PlcVendorSymbolBuilder
-
Returns the type
License requirements: None.
- dataType() - Method in interface nxopen.AttributePropertiesBaseBuilder
-
Returns the data type, which determines the type of attribute to be created.
- dataType() - Method in interface nxopen.AttributeTemplatesBuilder
-
Returns the data type.
- datatype() - Method in interface nxopen.cae.BaseResultType
-
Returns the
Result.DataType
for this result type
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
Created in NX7.5.0
- dataType() - Method in interface nxopen.cae.SimLoadRecipe
-
Returns the data type of a
SimLoadRecipe
License requirements: None.
- dataType - Variable in class nxopen.mechatronics.MATLABClientBuilder.SignalData
-
Data Type
- dataType - Variable in class nxopen.mechatronics.SignalAdapterBuilder.SignalData
-
Data Type
- dataType() - Method in interface nxopen.motion.DriverMotionsData
-
Returns the driver data type
License requirements: mechanisms ("MECHANISMS")
.
- dataType() - Method in interface nxopen.motion.ExpressionFunctionBuilder
-
Returns the type.
- dataType() - Method in interface nxopen.tooling.LsdynaKfileGeneratorBuilder
-
Returns the data type
License requirements: None.
- datatype - Variable in class nxopen.uf.UFKf.AskValueOfListItemData
-
- datatype() - Method in interface nxopen.visualreporting.Condition
-
- dataTypeOption() - Method in interface nxopen.validate.RequirementBuilder
-
Returns the data type option
License requirements: None.
- dataTypes - Variable in class nxopen.uf.UFKf.AskRuleTypesData
-
- dataTypeSource() - Method in interface nxopen.ame.PlcSymbolBuilder
-
Returns the data type source
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- DATE - Static variable in class nxopen.ame.PlcDataType
-
- DATE - Static variable in class nxopen.annotations.TableCellStyleBuilder.CellFormatTypes
-
Date
- DATE - Static variable in class nxopen.AttributePropertiesBaseBuilder.DataTypeOptions
-
Date, the value will be date and time
- DATE - Static variable in class nxopen.issue.IssueProperty.Type
-
Date type
- DATE - Static variable in class nxopen.pdm.PdmSoaqueryNxmgrfielddatatype
-
Date
- DATE - Static variable in class nxopen.visualreporting.Property.DatatypeOption
-
Date data type
- date() - Method in interface nxopen.visualreporting.SpecifyDateBuilder
-
Returns the date
License requirements: None.
- DATE_AND_TIME - Static variable in class nxopen.ame.PlcDataType
-
- DATE_DM - Static variable in class nxopen.annotations.TableCellStyleBuilder.FormatType
-
Deprecated.
- DATE_DMY - Static variable in class nxopen.annotations.TableCellStyleBuilder.FormatType
-
Deprecated.
- DATE_DMY_DOT - Static variable in class nxopen.annotations.TableCellStyleBuilder.FormatType
-
Deprecated.
- DATE_MDY - Static variable in class nxopen.annotations.TableCellStyleBuilder.FormatType
-
Deprecated.
- DATE_MY - Static variable in class nxopen.annotations.TableCellStyleBuilder.FormatType
-
Deprecated.
- DATE_TIME - Static variable in class nxopen.annotations.TableCellStyleBuilder.CellFormatTypes
-
Date-Time
- DATE_TIME - Static variable in class nxopen.cae.PropertyTable.PropertyType
-
- DATE_Y4MD - Static variable in class nxopen.annotations.TableCellStyleBuilder.FormatType
-
Deprecated.
- DATE_YMD - Static variable in class nxopen.annotations.TableCellStyleBuilder.FormatType
-
Deprecated.
- dateBuf - Variable in class nxopen.uf.UF.SystemInfo
-
- DateBuilder - Interface in nxopen
-
The DateBuilder class allows a date and/or time to be input or output via the DateItem builder.
- dateConstraint() - Method in interface nxopen.AttributeTemplatesBuilder
-
Returns the date constraint.
- dateFormatType() - Method in interface nxopen.annotations.TableCellStyleBuilder
-
Returns the cell date format.
- dateItem() - Method in interface nxopen.DateBuilder
-
- DateItemBuilder - Interface in nxopen
-
This class stores a date and time.
- DateItemBuilder.DayOfMonth - Class in nxopen
-
Days of the month
- DateItemBuilder.MonthOfYear - Class in nxopen
-
Months of the year.
- DateItemBuilderList - Interface in nxopen
-
Represents a list of objects.
- dateItemList() - Method in interface nxopen.DateBuilder
-
Returns a list of
DateItemBuilder
objects used to store a list of dates and times.
- dateString() - Method in interface nxopen.visualreporting.SpecifyDateBuilder
-
Returns the current date as string
License requirements: None.
- DateTimePropertyValueData() - Constructor for class nxopen.cae.PropertyTable.DateTimePropertyValueData
-
- dateValue() - Method in interface nxopen.AttributePropertiesBaseBuilder
-
Returns the date value.
- dateValue() - Method in interface nxopen.sim.postconfigurator.PostConfiguratorBuilder
-
Returns the date value.
- Datum - Interface in nxopen.annotations
-
- DATUM - Static variable in class nxopen.annotations.LeaderData.ArrowheadType
-
Datum symbol
- DATUM - Static variable in class nxopen.annotations.LeaderData.LeaderType
-
Datum feature symbol style
- DATUM - Static variable in class nxopen.annotations.PmiFilterByType.Type
-
Indicates a PMI datum feature type
- DATUM - Static variable in class nxopen.cam.InspectionAlignmentBuilder.RotationMethods
-
Rotate by Datum
- DATUM - Static variable in class nxopen.cam.InspectionAlignmentBuilder.XtMethods
-
Translate by Datum
- DATUM - Static variable in class nxopen.cam.InspectionAlignmentBuilder.YtMethods
-
Translate by Datum
- DATUM - Static variable in class nxopen.cam.InspectionAlignmentBuilder.ZtMethods
-
Translate by Datum
- DATUM - Static variable in class nxopen.features.BridgeCurveBuilderEx.EndObjectTypes
-
A datum plane or axis for symmetric constraint
- DATUM - Static variable in class nxopen.features.GeodesicIntersectBuilder.Type
-
Datum.
- DATUM - Static variable in class nxopen.features.PartGeometryCopyBuilder.Type
-
Datum plane, datum axis or datum coordinate system feature
- datum() - Method in interface nxopen.features.PartGeometryCopySelectBuilder
-
Returns the datum
License requirements: None.
- DATUM - Static variable in class nxopen.preferences.PartObject.ObjectType
-
Datum
- datum - Variable in class nxopen.uf.UFSket.Info
-
- DATUM - Static variable in class nxopen.weld.WeldAdvisorCustomerDefault
-
datum, used for implementing weld advisor parameters
- DATUM_ARROW - Static variable in class nxopen.annotations.LeaderType
-
- DATUM_ARROW - Static variable in class nxopen.uf.UFDrf.ArrowType
-
- DATUM_AXES - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide datum axes
- DATUM_CSYS - Static variable in class nxopen.features.shipdesign.ProfileBuilder.OrientationOption
-
- DATUM_CSYS - Static variable in class nxopen.features.shipdesign.StiffenerBuilder.OrientationMethod
-
Align stiffener with one or more coordinate systems
- DATUM_CSYS - Static variable in class nxopen.preferences.PartObject.ObjectType
-
Datum CSYS Feature
- DATUM_CUSTOM1_FEATURE - Static variable in class nxopen.uf.UFConstants
-
- DATUM_CUSTOM1FEATURE - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
-
- DATUM_CUSTOM2_FEATURE - Static variable in class nxopen.uf.UFConstants
-
- DATUM_CUSTOM2FEATURE - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
-
- DATUM_CUSTOM3_FEATURE - Static variable in class nxopen.uf.UFConstants
-
- DATUM_CUSTOM3FEATURE - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
-
- DATUM_DEFINITION - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.TolType
-
Datum Definition
- DATUM_DIM - Static variable in class nxopen.annotations.LeaderType
-
- DATUM_EXT - Static variable in class nxopen.annotations.LeaderType
-
- DATUM_FEATURE_SYMBOL - Static variable in class nxopen.annotations.SearchModelViewBuilder.PmiTypes
-
datum feature symbol type
- DATUM_FEATURE_SYMBOL - Static variable in class nxopen.drawings.AnnotationSettingsBuilder.AnnotationTypeEnum
-
- DATUM_IDENTIFIER_TYPE - Static variable in class nxopen.uf.UFGdt.ToleranceType
-
- DATUM_INVALID_CONSTRAINTS - Static variable in class nxopen.uf.UFConstants
-
- DATUM_LINK - Static variable in class nxopen.features.WaveLinkBuilder.Types
-
- DATUM_LOC_HOLE_NA_TYPE - Static variable in class nxopen.uf.UFProcessAid.Types
-
- DATUM_LOC_HOLE_TYPE - Static variable in class nxopen.uf.UFProcessAid.Types
-
- DATUM_LOC_PIN_NA_TYPE - Static variable in class nxopen.uf.UFProcessAid.Types
-
- DATUM_LOC_PIN_TYPE - Static variable in class nxopen.uf.UFProcessAid.Types
-
- DATUM_LOC_SLOT_NA_TYPE - Static variable in class nxopen.uf.UFProcessAid.Types
-
- DATUM_LOC_SLOT_TYPE - Static variable in class nxopen.uf.UFProcessAid.Types
-
- DATUM_LOC_SURF_NA_TYPE - Static variable in class nxopen.uf.UFProcessAid.Types
-
- DATUM_LOC_SURF_TYPE - Static variable in class nxopen.uf.UFProcessAid.Types
-
- DATUM_LOCATOR - Static variable in class nxopen.weld.WeldObjectBuilder.CommandName
-
Datum Locator command
- DATUM_LOCATOR - Static variable in class nxopen.weld.WeldPointExitBuilder.CommandName
-
Datum Locator command
- DATUM_MULTIPLE_TYPE - Static variable in class nxopen.uf.UFGdt.ToleranceType
-
- DATUM_ON_DOT_TERMINATED_LEADER - Static variable in class nxopen.annotations.LeaderType
-
leader type for "datum on dot terminated leader"
- DATUM_PIN - Static variable in class nxopen.weld.WeldObjectBuilder.CommandName
-
Datum Pin command
- DATUM_PIN_CUSTOM0 - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
-
- DATUM_PIN_CUSTOM1 - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
-
- DATUM_PIN_CUSTOM2 - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
-
- DATUM_PIN_CUSTOM3 - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
-
- DATUM_PIN_CUSTOM4 - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
-
- DATUM_PIN_CUSTOM5 - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
-
- DATUM_PIN_CUSTOM6 - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
-
- DATUM_PIN_CUSTOM7 - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
-
- DATUM_PIN_FEATURE - Static variable in class nxopen.uf.UFConstants
-
- DATUM_PIN_FEATURE - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
-
- DATUM_PLANE - Static variable in class nxopen.features.AeroFlangeBuilder.GuideObjectTypes
-
Guide object is datum plane
- DATUM_PLANE - Static variable in class nxopen.features.AeroRibBuilder.GuideObjectTypes
-
Guide object is datum plane
- DATUM_PLANE - Static variable in class nxopen.features.ShelfBuilder.ReferenceType
-
- DATUM_PLANE - Static variable in class nxopen.features.StepBuilder.ReferenceBoundaryTypes
-
Select datum plane as reference boundary object
- DATUM_PLANE_ALIGNMENT - Static variable in class nxopen.features.shipdesign.BracketBuilder.AlignmentTypes
-
The bracket molding face is aligned to a datum plane
- DATUM_PLANE_GRIDS - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide datum plane grids
- DATUM_PLANES - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide datum planes
- DATUM_POINT - Static variable in class nxopen.uf.UFConstants
-
- DATUM_POINT - Static variable in class nxopen.uf.UFDisp.PolyMarker
-
- DATUM_POINT - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- DATUM_PT_TYPE - Static variable in class nxopen.uf.UFProcessAid.Types
-
- DATUM_SURFACE - Static variable in class nxopen.weld.WeldObjectBuilder.CommandName
-
Datum Surface command
- DATUM_SURFACE_CUSTOM0 - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
-
- DATUM_SURFACE_CUSTOM1 - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
-
- DATUM_SURFACE_CUSTOM2 - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
-
- DATUM_SURFACE_CUSTOM3 - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
-
- DATUM_SURFACE_CUSTOM4 - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
-
- DATUM_SURFACE_CUSTOM5 - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
-
- DATUM_SURFACE_CUSTOM6 - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
-
- DATUM_SURFACE_CUSTOM7 - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
-
- DATUM_SURFACE_FEATURE - Static variable in class nxopen.uf.UFConstants
-
- DATUM_SURFACE_FEATURE - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
-
- DATUM_TARGET - Static variable in class nxopen.annotations.PmiFilterByType.Type
-
Indicates a PMI datum target type
- DATUM_TARGET - Static variable in class nxopen.annotations.SearchModelViewBuilder.PmiTypes
-
datum target type
- DATUM_TARGET - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.TolType
-
- DATUM_TARGET - Static variable in class nxopen.drawings.AnnotationSettingsBuilder.AnnotationTypeEnum
-
- DATUM_TARGET_CYL_TYPE - Static variable in class nxopen.uf.UFGdt.ToleranceType
-
- DATUM_TARGET_DIA_TYPE - Static variable in class nxopen.uf.UFGdt.ToleranceType
-
- DATUM_TARGET_LINE_TYPE - Static variable in class nxopen.uf.UFGdt.ToleranceType
-
- DATUM_TARGET_POINT_TYPE - Static variable in class nxopen.uf.UFGdt.ToleranceType
-
- DATUM_TARGET_RECT_TYPE - Static variable in class nxopen.uf.UFGdt.ToleranceType
-
- DATUM_TARGET_USER_DEFINED_TYPE - Static variable in class nxopen.uf.UFGdt.ToleranceType
-
- DatumAxis - Interface in nxopen
-
Represents a datum axis
This object can not be created by KF it's the display objet of the datum axis
.
- datumAxis() - Method in interface nxopen.features.DatumAxisFeature
-
Returns the geometric object associated with the datum axis feature
License requirements: solid_modeling ("SOLIDS MODELING")
.
- datumAxis - Variable in class nxopen.uf.UFModl.SmcutoutData
-
- datumAxis - Variable in class nxopen.uf.UFModl.SmholeData
-
- datumAxis - Variable in class nxopen.uf.UFModl.SmpunchData
-
- DatumAxis.EndPointsData - Class in nxopen
-
- DatumAxisBuilder - Interface in nxopen.features
-
Represents a datum axis feature builder.
- DatumAxisBuilder.AlternateSolution - Class in nxopen.features
-
Specifies the alternate solution for datum axis using point on curve method only
- DatumAxisBuilder.ConstraintType - Class in nxopen.features
-
Specifies different constraint types for selected geometries
- DatumAxisBuilder.CurveOption - Class in nxopen.features
-
Specifies the distance on the curve as absolute distance or relative distance as percentage
- DatumAxisBuilder.CurveOrientations - Class in nxopen.features
-
Available orientations that the user can choose when the Datum Axis type is On Curve Vector
- DatumAxisBuilder.DirectionOrientations - Class in nxopen.features
-
Two available direction orientations that the user can choose when the Datum Axis type is Point and Direction
- DatumAxisBuilder.FixedType - Class in nxopen.features
-
Specifies the fixed type datum axis going thru only one specific axis or thru all axes.
- DatumAxisBuilder.Types - Class in nxopen.features
-
New Datum Axis types in NX5
- DatumAxisBuilder.UseArcLength - Class in nxopen.features
-
Specifies points for which arclength is to be used.
- DatumAxisFeature - Interface in nxopen.features
-
Represents a datum axis feature
To create or edit an instance of this class, use
DatumAxisBuilder
Created in NX3.0.0
- DatumBuilder - Interface in nxopen.features
-
Represents a builder for datum features.
- DatumCollection - Interface in nxopen
-
Represents a collection of datum geometry.
- DatumCommonBuilder - Interface in nxopen.weld
-
- DatumCommonBuilder.ControlMethodTypes - Class in nxopen.weld
-
Settings for the method used to define the control direction.
- DatumCommonBuilder.CreationDirectionMethods - Class in nxopen.weld
-
Settings to define the creation direction.
- DatumCommonBuilder.CustomTypes - Class in nxopen.weld
-
The custom type of the datum specified for creation.
- DatumCommonBuilder.SolidTypes - Class in nxopen.weld
-
Settings for defining the solid type to create for the datum object.
- DatumConstraint - Interface in nxopen
-
Represents a constraint that specifies the location of a
DatumFeature
.
- DatumConstraint.CurveOption - Class in nxopen
-
Specifies the distance on the curve as absolute distance or relative distance as percentage
- DatumConstraint.Solution - Class in nxopen
-
Specifies the alternate solution for datum axis using point on curve method
- DatumConstraint.Type - Class in nxopen
-
Specifies different constraint types for selected geometries
- DatumCsys - Interface in nxopen.features
-
Represents a Datum Coordinate System feature.
- DatumCsysBuilder - Interface in nxopen.features
-
- DatumCsysBuilder.WaveLinkInformationData - Class in nxopen.features
-
- DatumData - Interface in nxopen.annotations
-
Represents datum data .
- datumExtendedText() - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
Returns the datum extended text
License requirements: None.
- datumExtendedTextToggle() - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
Returns the datum extended text toggle
License requirements: None.
- datumExtendedTextType() - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
Returns the datum extended text toggle
License requirements: None.
- datumFace() - Method in interface nxopen.tooling.BlankGeneratorBuilder
-
Returns the face used to update a blank.
- DatumFeature - Interface in nxopen.features
-
Represents a Datum feature that is positioned by a set of constraints.
- datumFeature - Variable in class nxopen.uf.UFGdt.DatumReference
-
- datumFeature - Variable in class nxopen.uf.UFGdt.DatumTargetLine
-
- datumFeature - Variable in class nxopen.uf.UFGdt.DatumTargetPoint
-
- datumFeature - Variable in class nxopen.uf.UFGdt.TargetCylArea
-
- datumFeature - Variable in class nxopen.uf.UFGdt.TargetDiaArea
-
- datumFeature - Variable in class nxopen.uf.UFGdt.TargetRectArea
-
- datumFeature - Variable in class nxopen.uf.UFGdt.TargetUdefArea
-
- datumFeatures - Variable in class nxopen.uf.UFGdt.MultipleDatum
-
- DatumFeatureSymbolBuilder - Interface in nxopen.annotations
-
Represents a Base Datum Feature Symbol Builder for all types of datum feature symbols
This is an abstract class, and cannot be instantiated.
- datumFeatureSymbolCompare() - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
- datumFeatureSymbolLabel() - Method in interface nxopen.annotations.SearchCriteriaDatumFeatureSymbolBuilder
-
Returns the datum feature symbol label
License requirements: None.
- datumFeatureSymbolLeaderTerminatorCompare() - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
- datumFeatureSymbolOriginCompare() - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
- datumFeatureSymbolRetainedStatusCompare() - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
- datumFeatureSymbolTextCompare() - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
- datumFirstReferenceDirection() - Method in interface nxopen.weld.WeldPointBuilder
-
Returns the datum reference direction type.
- DatumIconBuilder - Interface in nxopen.weld
-
Represents a
DatumIconBuilder
class used to control the part navigator icon for Datum Pin and Surface Locators.
- datumIconHandler(DatumIconBuilder) - Method in interface nxopen.weld.CustomManager.DatumIconHandler
-
Method called from the part navigator to define the datum surface and pin icon.
- DatumIdentifier() - Constructor for class nxopen.uf.UFGdt.DatumIdentifier
-
- DatumIdentifier(String, Tag, boolean) - Constructor for class nxopen.uf.UFGdt.DatumIdentifier
-
- datumIdLowerRange() - Method in interface nxopen.weld.WeldPreferenceBuilder
-
Returns the datum id lower range
License requirements: None.
- datumIdUpperRange() - Method in interface nxopen.weld.WeldPreferenceBuilder
-
Returns the datum id upper range
License requirements: None.
- datumLabel() - Method in interface nxopen.annotations.DatumReference
-
Returns the datum label
License requirements: None.
- datumLabel() - Method in interface nxopen.annotations.DatumTargetData
-
Returns the datum label.
- datumLabel() - Method in interface nxopen.annotations.IDatumTarget
-
Returns the datum target label.
- datumLabel() - Method in interface nxopen.annotations.PmiPreferences
-
Returns the initial letter for datum labels
License requirements: None.
- datumLabel - Variable in class nxopen.uf.UFGdt.DatumIdentifier
-
- datumLengthPastArrow() - Method in interface nxopen.annotations.LineAndArrowPreferences
-
Returns the datum extension line past the arrow distance
License requirements: None.
- datumLengthPastArrow() - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
Returns the distance from the apex of the datum arrowhead to the
end of the extension line
License requirements: None.
- datumLengthPastArrow - Variable in class nxopen.uf.UFDrf.LineArrowPreferences
-
- datumMajorDirection() - Method in interface nxopen.weld.WeldPointBuilder
-
Returns the datum major direction type.
- datumMCMToggle() - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
Returns the datum mcm toggle
License requirements: None.
- datumMCMType() - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
Returns the datum mcm enum
License requirements: None.
- datumMovable() - Method in interface nxopen.annotations.SearchCriteriaDatumTargetBuilder
-
Returns the movable datum target type
License requirements: None.
- datumNamePrefix() - Method in interface nxopen.weld.WeldPreferenceBuilder
-
Returns the datum name prefix
License requirements: None.
- datumObjectColor() - Method in interface nxopen.weld.WeldPreferenceBuilder
-
Returns the datum object color
License requirements: None.
- datumObjectLayer() - Method in interface nxopen.weld.WeldPreferenceBuilder
-
Returns the datum object layer
License requirements: None.
- datumOnDotTerminatedArrowhead() - Method in interface nxopen.annotations.LeaderData
-
Returns the datum arrowhead type for the datum portion of a datum on dot terminated leader
License requirements: None.
- datumOnDotTerminatedEndPoint() - Method in interface nxopen.annotations.LeaderData
-
Returns the datum end point for the leader segment of the datum portion of a datum on dot terminated leadet
License requirements: None.
- datumOnDotTerminatedStartPoint() - Method in interface nxopen.annotations.LeaderData
-
Returns the datum start point for the leader segment of the datum portion of a datum on dot terminated leader
License requirements: None.
- datumPartNumber() - Method in interface nxopen.weld.WeldPreferenceBuilder
-
Returns the datum part number
License requirements: None.
- datumPin() - Method in interface nxopen.weld.DatumIconBuilder
-
Returns the DatumPin feature.
- DatumPin - Interface in nxopen.weld
-
Represents a Weld Datum Pin feature
To create or edit an instance of this class, use
DatumPinBuilder
Created in NX8.5.0
- DatumPinBuilder - Interface in nxopen.weld
-
Used to create or edit a
DatumPin
feature.
- DatumPlane - Interface in nxopen
-
Represents a datum plane
This object can not be created by KF it's the display objet of the datum plane
.
- datumPlane() - Method in interface nxopen.features.DatumPlaneFeature
-
Returns the geometric object associated to the datum plane feature
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- datumPlane() - Method in interface nxopen.features.sheetmetal.GussetBuilder
-
Returns the plane of the gusset profile.
- datumPlane() - Method in interface nxopen.tooling.QuickQuotationBuilder
-
Create a datum plane.
- datumPlane - Variable in class nxopen.uf.UFWave.AskLinkMirrorData
-
- DatumPlane.CornerPointsData - Class in nxopen
-
- DatumPlaneBuilder - Interface in nxopen.features
-
Represents a datum plane feature builder.
- DatumPlaneBuilder.AlternateSolution - Class in nxopen.features
-
Specifies the alternate solution for a datum plane using point on curve method
- DatumPlaneBuilder.ConstraintType - Class in nxopen.features
-
Specifies different constraint types of selected geometries
- DatumPlaneBuilder.CurveOption - Class in nxopen.features
-
Specifies the distance on the curve as absolute distance or relative distance as percentage
- DatumPlaneBuilder.FixedType - Class in nxopen.features
-
Specifies the fixed type datum plane going thru only one specific plane or thru all planes
- DatumPlaneBuilder.UseArcLength - Class in nxopen.features
-
Specifies points for which arclength is to be used.
- DatumPlaneFeature - Interface in nxopen.features
-
Represents a datum plane feature
To create or edit an instance of this class, use
DatumPlaneBuilder
Created in NX3.0.0
- datumPlaneFitting() - Method in interface nxopen.cam.InspectionAnalyzeBuilder
-
Returns the analysis datum plane fitting type
License requirements: None.
- datumPlaneFittingMode() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns the analysis datum plane fitting mode
License requirements: None.
- datumPlaneFittingModeBuilder() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
Returns the Datum Plane Fitting Mode Builder
License requirements: None.
- DatumPlaneGrid - Interface in nxopen.display
-
Represents a grid on a datum plane
Datum plane grids are not supported in KF.
- DatumPlaneGridBuilder - Interface in nxopen.display
-
Represents the builder for adding a datum plane grid
DatumPlaneGrid
to a datum plane.
- DatumPlaneGridBuilder.GridOrientationType - Class in nxopen.display
-
Specifies grid orientation option to be used for grid display.
- datumPlaneLayer() - Method in interface nxopen.features.SectionInertiaAnalysisBuilder
-
Returns the datum plane layer
License requirements: None.
- datumPlanes() - Method in interface nxopen.features.SectionInertiaAnalysisBuilder
-
Returns the datum planes
License requirements: None.
- datumPlanes() - Method in interface nxopen.features.shipdesign.TraceLinesBuilder
-
Returns the datum planes
License requirements: None.
- datumPoint - Variable in class nxopen.uf.UFProcessAid.AskDatumObjectsData
-
- DatumReference - Interface in nxopen.annotations
-
Represents a datum reference .
- DatumReference() - Constructor for class nxopen.uf.UFGdt.DatumReference
-
- DatumReference(Tag, UFGdt.MaterialModifier[], int) - Constructor for class nxopen.uf.UFGdt.DatumReference
-
- datumReference - Variable in class nxopen.uf.UFGdt.DrfReference
-
- DatumReferenceBuilder - Interface in nxopen.annotations
-
- DatumReferenceBuilder.DatumReferenceMaterialCondition - Class in nxopen.annotations
-
Specifies the material modifier condition for the datum reference
- DatumReferenceBuilderList - Interface in nxopen.annotations
-
Represents a list of objects.
- datumReferenceList() - Method in interface nxopen.annotations.CompoundDatumReferenceBuilder
-
Returns the list of datum references
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- datums() - Method in interface nxopen.annotations.AnnotationManager
-
Datum collection .
- datums() - Method in interface nxopen.BasePart
-
Returns the DatumCollection instance belonging to this part .
- DATUMS - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide Datums i.e Coordinate Systems
Datum Axes, Datum Planes, Datum Plane Grids,
Points
- datums() - Method in interface nxopen.features.WaveDatumBuilder
-
Returns the datum to link
License requirements: None.
- datums - Variable in class nxopen.uf.UFGdt.AskDatumsOfFeatureData
-
- datumSecondReferenceDirection() - Method in interface nxopen.weld.WeldPointBuilder
-
Returns the datum reference direction type.
- datumSelection() - Method in interface nxopen.tooldesigner.SelectFixtureUnitsBuilder
-
Returns the datum selection
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- datumSurface() - Method in interface nxopen.weld.DatumIconBuilder
-
Returns the DatumSurface feature.
- DatumSurface - Interface in nxopen.weld
-
Represents a Weld Datum Surface feature
To create or edit an instance of this class, use
DatumSurfaceBuilder
Created in NX8.5.0
- DatumSurfaceBuilder - Interface in nxopen.weld
-
- DatumSurfaceBuilder.Types - Class in nxopen.weld
-
Settings to indicate the construction type used for the datum surface.
- datumTag - Variable in class nxopen.uf.UFSket.Info
-
- DatumTarget - Interface in nxopen.annotations
-
Represents a datum target
To create or edit an instance of this class, use
PmiDatumTargetBuilder
Created in NX4.0.0
- DatumTargetBuilder - Interface in nxopen.annotations
-
Represents a Datum target Builder
This is an abstract class, and cannot be instantiated.
- DatumTargetBuilder.StandardTypes - Class in nxopen.annotations
-
represents the datum target standards
- DatumTargetBuilder.TerminatorTypes - Class in nxopen.annotations
-
represents the datum target terminator type
- DatumTargetBuilder.Types - Class in nxopen.annotations
-
datum symbol type
- DatumTargetCollection - Interface in nxopen.annotations
-
- datumTargetCompare() - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
- DatumTargetData - Interface in nxopen.annotations
-
Represents datum target data .
- datumTargetLabelText() - Method in interface nxopen.annotations.SearchCriteriaDatumTargetBuilder
-
Returns the datum target label text
License requirements: None.
- datumTargetLeaderTerminatorCompare() - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
- DatumTargetLine() - Constructor for class nxopen.uf.UFGdt.DatumTargetLine
-
- DatumTargetLine(Tag, Tag, double[], double[], Tag, int) - Constructor for class nxopen.uf.UFGdt.DatumTargetLine
-
- datumTargetOriginCompare() - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
- DatumTargetPoint() - Constructor for class nxopen.uf.UFGdt.DatumTargetPoint
-
- DatumTargetPoint(Tag, double[], Tag, int) - Constructor for class nxopen.uf.UFGdt.DatumTargetPoint
-
- datumTargetRetainedStatusCompare() - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
- datumTargets() - Method in interface nxopen.annotations.AnnotationManager
-
DatumTarget collection .
- datumTargetStandard() - Method in interface nxopen.annotations.DatumTargetBuilder
-
Returns the datum target standard.
- datumTargetTextCompare() - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
- datumTargetType() - Method in interface nxopen.annotations.SearchCriteriaDatumTargetBuilder
-
Returns the datum target type enum
License requirements: None.
- datumText() - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
Returns the datum text
License requirements: None.
- datumToggle() - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
Returns the datum toggle
License requirements: None.
- datumType - Variable in class nxopen.uf.UFProcessAid.IsDatumObjectData
-
- datumVector - Variable in class nxopen.uf.UFProcessAid.AskDatumObjectsData
-
- datumXform - Variable in class nxopen.uf.UFWave.AskLinkMirrorData
-
- daxes - Variable in class nxopen.uf.UFModlFeatures.AskDatumCsysComponentsData
-
- day() - Method in interface nxopen.DateItemBuilder
-
Returns the day
License requirements: None.
- day - Variable in class nxopen.NXObject.ComputationalTime
-
- day - Variable in class nxopen.uf.UFPs.KernelVersion
-
- day - Variable in class nxopen.Validation.LookupTimeData
-
Date associate with the key
- DAY - Static variable in class nxopen.visualreporting.Classifier.DateGroupMethodOption
-
The date grouping by day will be used
- DAY01 - Static variable in class nxopen.DateItemBuilder.DayOfMonth
-
- DAY02 - Static variable in class nxopen.DateItemBuilder.DayOfMonth
-
- DAY03 - Static variable in class nxopen.DateItemBuilder.DayOfMonth
-
- DAY04 - Static variable in class nxopen.DateItemBuilder.DayOfMonth
-
- DAY05 - Static variable in class nxopen.DateItemBuilder.DayOfMonth
-
- DAY06 - Static variable in class nxopen.DateItemBuilder.DayOfMonth
-
- DAY07 - Static variable in class nxopen.DateItemBuilder.DayOfMonth
-
- DAY08 - Static variable in class nxopen.DateItemBuilder.DayOfMonth
-
- DAY09 - Static variable in class nxopen.DateItemBuilder.DayOfMonth
-
- DAY10 - Static variable in class nxopen.DateItemBuilder.DayOfMonth
-
- DAY11 - Static variable in class nxopen.DateItemBuilder.DayOfMonth
-
- DAY12 - Static variable in class nxopen.DateItemBuilder.DayOfMonth
-
- DAY13 - Static variable in class nxopen.DateItemBuilder.DayOfMonth
-
- DAY14 - Static variable in class nxopen.DateItemBuilder.DayOfMonth
-
- DAY15 - Static variable in class nxopen.DateItemBuilder.DayOfMonth
-
- DAY16 - Static variable in class nxopen.DateItemBuilder.DayOfMonth
-
- DAY17 - Static variable in class nxopen.DateItemBuilder.DayOfMonth
-
- DAY18 - Static variable in class nxopen.DateItemBuilder.DayOfMonth
-
- DAY19 - Static variable in class nxopen.DateItemBuilder.DayOfMonth
-
- DAY20 - Static variable in class nxopen.DateItemBuilder.DayOfMonth
-
- DAY21 - Static variable in class nxopen.DateItemBuilder.DayOfMonth
-
- DAY22 - Static variable in class nxopen.DateItemBuilder.DayOfMonth
-
- DAY23 - Static variable in class nxopen.DateItemBuilder.DayOfMonth
-
- DAY24 - Static variable in class nxopen.DateItemBuilder.DayOfMonth
-
- DAY25 - Static variable in class nxopen.DateItemBuilder.DayOfMonth
-
- DAY26 - Static variable in class nxopen.DateItemBuilder.DayOfMonth
-
- DAY27 - Static variable in class nxopen.DateItemBuilder.DayOfMonth
-
- DAY28 - Static variable in class nxopen.DateItemBuilder.DayOfMonth
-
- DAY29 - Static variable in class nxopen.DateItemBuilder.DayOfMonth
-
- DAY30 - Static variable in class nxopen.DateItemBuilder.DayOfMonth
-
- DAY31 - Static variable in class nxopen.DateItemBuilder.DayOfMonth
-
- daylightBottomLeft() - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder
-
Returns the left Daylight Bottom additional geometry.
- daylightBottomLeft() - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarWizardBuilder
-
Returns the left daylight opening bottom point.
- daylightBottomLeft() - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarDetailBuilder
-
Returns the left Daylight Bottom additional geometry.
- daylightBottomLeft() - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarWizardBuilder
-
Returns the left daylight opening bottom point.
- daylightBottomLeftFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder
-
Returns the left Daylight Bottom additional geometry flag.
- daylightBottomLeftFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarDetailBuilder
-
Returns the left Daylight Bottom additional geometry flag.
- daylightBottomRight() - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder
-
Returns the right Daylight Bottom additional geometry.
- daylightBottomRight() - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarWizardBuilder
-
Returns the right daylight opening bottom point.
- daylightBottomRight() - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarDetailBuilder
-
Returns the right Daylight Bottom additional geometry.
- daylightBottomRight() - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarWizardBuilder
-
Returns the right daylight opening bottom point.
- daylightBottomRightFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder
-
Returns the right Daylight Bottom additional geometry flag.
- daylightBottomRightFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarDetailBuilder
-
Returns the right Daylight Bottom additional geometry flag.
- daylightOpeningLeft() - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarWizardBuilder
-
Returns the left forward daylight opening geometry.
- daylightOpeningLeft() - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarWizardBuilder
-
Returns the left forward daylight opening geometry.
- daylightOpeningLeft() - Method in interface nxopen.features.vehicledesign.HeadImpactOtherRailWizardBuilder
-
Returns the left forward daylight opening geometry.
- daylightOpeningLeft() - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailWizardBuilder
-
Returns the left forward daylight opening geometry.
- daylightOpeningRight() - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarWizardBuilder
-
Returns the right forward daylight opening geometry.
- daylightOpeningRight() - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarWizardBuilder
-
Returns the right forward daylight opening geometry.
- daylightOpeningRight() - Method in interface nxopen.features.vehicledesign.HeadImpactOtherRailWizardBuilder
-
Returns the right forward daylight opening geometry.
- daylightOpeningRight() - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailWizardBuilder
-
Returns the right forward daylight opening geometry.
- DAYTIME_HORIZON - Static variable in class nxopen.geometricanalysis.ReflectionAnalysisBuilder.SceneImageType
-
Daytime horizon.
- DB - Static variable in class nxopen.ame.MemorySectionType
-
- DB - Static variable in class nxopen.ame.PlcDataType
-
- DB - Static variable in class nxopen.ame.ProgrammingLanguage
-
- DB - Static variable in class nxopen.cae.xyplot.AxisType
-
Db type
- DB10 - Static variable in class nxopen.cae.Result.DbScale
-
- DB10 - Static variable in class nxopen.cae.SignalProcessingDBSettings.DBFormats
-
10
- DB20 - Static variable in class nxopen.cae.Result.DbScale
-
- DB20 - Static variable in class nxopen.cae.SignalProcessingDBSettings.DBFormats
-
20
- DB_ANY - Static variable in class nxopen.ame.PlcDataType
-
- DB_DYN - Static variable in class nxopen.ame.PlcDataType
-
- DB_WWW - Static variable in class nxopen.ame.PlcDataType
-
- DBC - Static variable in class nxopen.ame.MemorySectionType
-
- dbcMld() - Method in interface nxopen.UFSession
-
- DBColumnGridNode - Interface in nxopen.linedesigner
-
- DBConveyorNode - Interface in nxopen.linedesigner
-
- dbDecades() - Method in interface nxopen.cae.xyplot.AxisStyleSetting
-
- dbEdgeDistance() - Method in interface nxopen.tooling.DieBaseBuilder
-
Returns the distance to die base edge.
- dbentityProxies() - Method in interface nxopen.Part
-
Returns the DBEntityProxyCollection instance belonging to this part .
- DBEntityProxy - Interface in nxopen.pdm
-
JA class for the DBEntityProxy object
This is an abstract class, and cannot be instantiated.
- DBEntityProxyCollection - Interface in nxopen.pdm
-
Represents a collection of
DBEntityProxy
objects
To obtain an instance of this class, refer to
Part
Created in NX11.0.1
- DBFactoryCadGeoNode - Interface in nxopen.linedesigner
-
- DBFactoryNode - Interface in nxopen.linedesigner
-
- DBFactoryNode.NodeType - Class in nxopen.linedesigner
-
This enum define the factory node type
- DBFenceNode - Interface in nxopen.linedesigner
-
- DBFloorEquipmentNode - Interface in nxopen.linedesigner
-
- dbformat() - Method in interface nxopen.cae.SignalProcessingDBSettings
-
Returns the dB format to apply
License requirements: None.
- dbgEnd(UFVariant) - Method in interface nxopen.uf.UFSim
-
- dbgSetOutput(UFVariant, boolean, String) - Method in interface nxopen.uf.UFSim
-
- dbgStart(UFVariant, String) - Method in interface nxopen.uf.UFSim
-
- DBGunTipsNode - Interface in nxopen.tooldesigner
-
Represents DB work set node
To create a new instance of this class, use nxopen.ToolDesigner.DBNodeManager#createDBGunTipsNode
Created in NX10.0.0
- dbgWriteMessage(UFVariant, String) - Method in interface nxopen.uf.UFSim
-
- dbitem() - Method in interface nxopen.cae.connections.ConnectionData
-
Returns the db item
License requirements: None.
- dblArray - Variable in class nxopen.uf.UFParam.AskDoubleVlaData
-
- dblDefault - Variable in class nxopen.uf.UFParam.IndexAttribute
-
- DBNode - Interface in nxopen.linedesigner
-
Represents DB node
This is an abstract class, and cannot be instantiated.
- DBNode - Interface in nxopen.tooldesigner
-
Represents DB node
This is an abstract class, and cannot be instantiated.
- DBNode.NodeType - Class in nxopen.linedesigner
-
This enum is providing possible node types
- DBNodeContainer - Interface in nxopen.linedesigner
-
- DBNodeContainer - Interface in nxopen.tooldesigner
-
Represents Generic DB node container
To create a new instance of this class, use nxopen.ToolDesigner.DBNodeManager#createDBNodeContainer
Created in NX11.0.0
- DBNodeManager - Interface in nxopen.linedesigner
-
Represents a manager of line designer db nodes
Use the static method in this class to obtain an instance.
- DBNodeManagerFactory - Class in nxopen.linedesigner
-
- DBNodeManagerFactory() - Constructor for class nxopen.linedesigner.DBNodeManagerFactory
-
- DBNodeUtils - Interface in nxopen.linedesigner
-
Represents a utils of line designer for journaling uinode methods
Use the static method in this class to obtain an instance.
- DBNodeUtilsFactory - Class in nxopen.linedesigner
-
- DBNodeUtilsFactory() - Constructor for class nxopen.linedesigner.DBNodeUtilsFactory
-
- DBPlatformEquipmentNode - Interface in nxopen.linedesigner
-
- DBR - Static variable in class nxopen.ame.MemorySectionType
-
- dbRef() - Method in interface nxopen.cae.xyplot.AxisStyleSetting
-
- dbreference() - Method in interface nxopen.cae.SignalProcessingDBSettings
-
Returns the dB reference to apply
License requirements: None.
- dbRefPointX() - Method in interface nxopen.tooling.DieBaseBuilder
-
Returns the X coordinates of reference point.
- dbRefPointY() - Method in interface nxopen.tooling.DieBaseBuilder
-
Returns the Y coordinates of reference point.
- dbScale() - Method in interface nxopen.cae.xyplot.AxisStyleSetting
-
- DBSmartComplexEquipmentNode - Interface in nxopen.linedesigner
-
Represents DB factory node .
- DBSmartEquipmentNode - Interface in nxopen.linedesigner
-
Represents DB factory node .
- DBStairwayEquipmentNode - Interface in nxopen.linedesigner
-
- DBStudyNode - Interface in nxopen.tooldesigner
-
Represents DB work set node
To create a new instance of this class, use nxopen.ToolDesigner.DBNodeManager#createDBStudyNode
Created in NX11.0.0
- DBV - Static variable in class nxopen.ame.MemorySectionType
-
- DBWorksetNode - Interface in nxopen.tooldesigner
-
Represents DB work set node
To create a new instance of this class, use nxopen.ToolDesigner.DBNodeManager#createDBWorksetNode
Created in NX10.0.0
- DCC - Static variable in class nxopen.ame.db.DocumentStructure.Attribute
-
- dcm3AddFixConstraint - Variable in class nxopen.routing.SegmentManager.SubdivideOption
-
- dcm3AddPoints - Variable in class nxopen.routing.SegmentManager.SubdivideOption
-
Add Points to subdivided splines to maintain shape
- dcm3CreateTangency - Variable in class nxopen.routing.SegmentManager.SubdivideOption
-
Create Tangency at subdivision point when subdividing splines
- dcoefficient - Variable in class nxopen.ConvergentFacet.PlaneEquationData
-
provides the D coefficient in the plane equation.
- dCoefficient - Variable in class nxopen.uf.UFFacet.AskPlaneEquationData
-
- dControlValue - Variable in class nxopen.linedesigner.FactoryCadGeoEquipmentAssemblyBuilder.UpdatedControlData
-
- dControlValue - Variable in class nxopen.linedesigner.FactoryCadGeoEquipmentBuilder.UpdatedControlData
-
- DCTK_COLLISION - Static variable in class nxopen.sim.SimDebugBuilder.TraceType
-
Trace Dctk Collision
- DCTK_DISPLAY - Static variable in class nxopen.sim.SimDebugBuilder.TraceType
-
Trace Dctk Display
- DCTK_MOVEMENTS - Static variable in class nxopen.sim.SimDebugBuilder.TraceType
-
Trace Dctk Movements
- DCTK_SETTINGS - Static variable in class nxopen.sim.SimDebugBuilder.TraceType
-
Trace Dctk Settings
- DCTK_WRITE_COLLISION_PAIRS - Static variable in class nxopen.sim.SimDebugBuilder.UiType
-
Write Collision Pairs
- DDAM - Static variable in class nxopen.cae.responsesimulation.RSEvent.Type
-
- ddamCoefficientA() - Method in interface nxopen.cae.responsesimulation.RSEventSolverParameters
-
Returns the DDAM A coefficient
License requirements: nx_response_anlys ("NX Response Analysis")
.
- ddamCoefficientV() - Method in interface nxopen.cae.responsesimulation.RSEventSolverParameters
-
Returns the DDAM V coefficient
License requirements: nx_response_anlys ("NX Response Analysis")
.
- DDAMComponentData - Interface in nxopen.cae.responsesimulation
-
Represents an excitation on one specified direction.
- DDAMComponentData.LoadingType - Class in nxopen.cae.responsesimulation
-
Specifies the loading type
- DDAMComponentData.ResponseType - Class in nxopen.cae.responsesimulation
-
Specifies the response type
- DDAMExcitation - Interface in nxopen.cae.responsesimulation
-
Represents an DDAM excitation.
- DDAMExcitation.CoefficientDefinitionType - Class in nxopen.cae.responsesimulation
-
the choices of define DDAM coefficients.
- DDAMExcitation.LoadingType - Class in nxopen.cae.responsesimulation
-
Specifies the loading type
- DDAMExcitation.MountingType - Class in nxopen.cae.responsesimulation
-
Specifies the mounting type
- DDAMExcitation.ResponseType - Class in nxopen.cae.responsesimulation
-
Specifies the response type
- DDAMExcitation.ShipType - Class in nxopen.cae.responsesimulation
-
Specifies the ship type
- DDAMExcitationBuilder - Interface in nxopen.cae.responsesimulation
-
- dDatumAxis - Variable in class nxopen.uf.UFModl.SmslotData
-
- ddiameter - Variable in class nxopen.mfg.am.BuildTray.DimensionsData
-
- DDMMM - Static variable in class nxopen.annotations.TableCellStyleBuilder.DateFormatTypes
-
- DDMMMYYYY - Static variable in class nxopen.annotations.TableCellStyleBuilder.DateFormatTypes
-
- DDMMYYYY - Static variable in class nxopen.annotations.TableCellStyleBuilder.DateFormatTypes
-
- DE_EMPHASIS - Static variable in class nxopen.visualreporting.GroupLabel.DisplayStyleOption
-
Matching objects will be de-emphasized
- deactivate() - Method in interface nxopen.assemblies.PositioningTask
-
- deactivate() - Method in interface nxopen.geometricutilities.PartModuleOutputBuilder
-
- deactivate() - Method in interface nxopen.layout2d.Component
-
Deactivates the component.
- deactivate() - Method in interface nxopen.SelectionSubscriber
-
Deactivate the subscriber so that it will not receive selection change notifications.
- deactivate() - Method in interface nxopen.sim.Breakpoint
-
Deactivate the breakpoint.
- deactivate(Sketch.ViewReorient, Sketch.UpdateLevel) - Method in interface nxopen.Sketch
-
Deactivates the sketch
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- DEACTIVATE_GRAPH_CONTROL - Static variable in class nxopen.mechatronics.GraphControlBuilder.EndAction
-
deactivate this graph control.
- deactivateAllBreakpoints() - Method in interface nxopen.sim.NcProgramManagerBuilder
-
Deactivate all active breakpoints.
- deactivateBreakpoint(NcProgram, int) - Method in interface nxopen.sim.NcProgramManagerBuilder
-
Deactivate a breakpoint in a program line.
- deactivateCurrentVisualReport() - Method in interface nxopen.visualreporting.VisualReportManager
-
- deactivatedPage() - Method in interface nxopen.uistyler.PageSwitchData
-
Returns the deactivated page
License requirements: None.
- deactivateGrid(UFDisp.GridContext, boolean) - Method in interface nxopen.uf.UFDisp
-
- deactivatePositioningGroup(PositioningGroup) - Method in interface nxopen.assemblies.PositioningTask
-
- deactiveAll() - Method in interface nxopen.motion.PhysicsConversionBuilder
-
The deactive button.
- DEBUG - Static variable in class nxopen.report.AutomationLogger.MessageType
-
Debug message
- DEBUG - Static variable in class nxopen.Step242Importer.MessageEnum
-
- DEBUG_UI - Static variable in class nxopen.sim.SimDebugBuilder.DumpType
-
Dump Debug UI
- debugDumpEnabled() - Method in interface nxopen.pdm.SmartSaveBuilder
-
Returns the debug dump enabled
License requirements: None.
- debugFlag() - Method in interface nxopen.RuleManager
-
Returns the debug update flag.
- DebugInstance() - Constructor for class nxopen.RuleManager.DebugInstance
-
- DebugInstance(String, String, String, int, int) - Constructor for class nxopen.RuleManager.DebugInstance
-
Constructor for the DebugInstance object.
- DebugInstancesData() - Constructor for class nxopen.RuleManager.DebugInstancesData
-
- DebugRule() - Constructor for class nxopen.RuleManager.DebugRule
-
- DebugRule(String, String, String, String, String) - Constructor for class nxopen.RuleManager.DebugRule
-
Constructor for the DebugRule object.
- DEC - Static variable in class nxopen.DateItemBuilder.MonthOfYear
-
- DECADE - Static variable in class nxopen.cae.AfuMathOperation.TimeToSrsAxisType
-
Points per Standard Decade
- Decal - Interface in nxopen
-
Represents a Material Texture decal pair
This class is restricted to being called from a program running during an
Interactive NX session.
- DecalBuilder - Interface in nxopen.display
-
Represents a
DecalBuilder
This class is restricted to being called from a program running during an
Interactive NX session.
- DecalBuilder.Anchor - Class in nxopen.display
-
image anchor
- DecalBuilder.DecalIllumination - Class in nxopen.display
-
decal illumination type
- DecalBuilder.DecalReflectivities - Class in nxopen.display
-
decal reflectivity type
- DecalBuilder.ImageSize - Class in nxopen.display
-
image size type
- DecalBuilder.Scaling - Class in nxopen.display
-
decal scaling type
- DecalCollection - Interface in nxopen.display
-
Represents a collection decal material texture
This class is restricted to being called from a program running during an
Interactive NX session.
- decalMaterials - Variable in class nxopen.uf.UFDisp.AskDecalsData
-
- decalName() - Method in interface nxopen.display.DecalBuilder
-
Returns the decal name
License requirements: None.
- decalReflectivity() - Method in interface nxopen.display.DecalBuilder
-
Returns the decal reflectivity
License requirements: None.
- decals() - Method in interface nxopen.BasePart
-
Returns the Display.DecalCollection instance belonging to this part
Created in NX3.0.0
- DECIMAL - Static variable in class nxopen.annotations.DimensionTextFormat
-
Specifies decimal format
- DECIMAL - Static variable in class nxopen.uf.UFDrf.FractionType
-
- DECIMAL_DEGREE - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.AngleFormat
-
Decimal Degrees
- DECIMAL_DEGREES - Static variable in class nxopen.cam.InspectionCmmCommandBuilder.AngularUnitsOptions
-
Use decimal degrees
- DECIMAL_POINT_COMMA - Static variable in class nxopen.uf.UFDrf.DecimalPointCharacter
-
- DECIMAL_POINT_PERIOD - Static variable in class nxopen.uf.UFDrf.DecimalPointCharacter
-
- DecimalFormat - Class in nxopen.cae.xyplot
-
Represents the decimal number format
- decimalFormat - Variable in class nxopen.uf.UFGdt.DepthTolerance
-
- decimalFormat - Variable in class nxopen.uf.UFGdt.ProjZone
-
- decimalFormat - Variable in class nxopen.uf.UFGdt.ToleranceValue
-
- decimalFormat - Variable in class nxopen.uf.UFGdt.ToleranceZone
-
- decimalFormat - Variable in class nxopen.uf.UFGdt.UnitBasis
-
- decimalPlace() - Method in interface nxopen.annotations.CoordinateNoteBuilder
-
Returns the decimal place for coordinate note display
License requirements: None.
- decimalPlaces() - Method in interface nxopen.annotations.HoleTableSettingsFormatBuilder
-
Returns the decimal places
License requirements: None.
- decimalPlaces() - Method in interface nxopen.annotations.ShipDraftingFramebarGeneralBuilder
-
Returns the decimal places
License requirements: None.
- decimalPlaces() - Method in interface nxopen.cae.NumberFormat
-
Returns the decimal places.
- decimalPlaces() - Method in interface nxopen.tooling.ForceCalculationBuilder
-
Returns the decimal places of the calculated force result.
- decimalPlaces - Variable in class nxopen.uf.UFUi.AskIwDecimalPlacesData
-
- DecimalPointCharacter - Class in nxopen.annotations
-
Specifies the decimal point character
- decimalPointCharacter() - Method in interface nxopen.annotations.UnitsFormatPreferences
-
Returns the decimal point character
License requirements: None.
- decimalPointCharacter() - Method in interface nxopen.annotations.UnitsStyleBuilder
-
Returns the decimal point character
License requirements: None.
- DecimalPointCharacter - Class in nxopen.preferences
-
Specifies the decimal point character for view angle display
- decimalPointCharacter - Variable in class nxopen.uf.UFDrf.UnitsFormatPreferences
-
- decimals() - Method in interface nxopen.cam.RoundPointBuilder
-
Returns the decimal places
License requirements: None.
- DecimateFacetBodyBuilder - Interface in nxopen.facet
-
- DecimateFacetBodyBuilder.DecimateMethodType - Class in nxopen.facet
-
Decimate Method
- decimateMethod() - Method in interface nxopen.facet.DecimateFacetBodyBuilder
-
Returns the decimation method
License requirements: None.
- decimationEnabled - Variable in class nxopen.motion.PostProcess.EnvelopeTolerance
-
Indicates if decimation is enabled or not.
- decimationFactor - Variable in class nxopen.motion.PostProcess.EnvelopeTolerance
-
Specifies targeted decimation rate which is decimated body/original body.
- decimationMaxError - Variable in class nxopen.motion.PostProcess.EnvelopeTolerance
-
Specifies max decimation error: (bigger than 0): percentage, (less than 0): absolute value.
- decimationOrder() - Method in interface nxopen.cae.DurabilityDataControlBuilder
-
Returns the decimation order.
- decimationOrder() - Method in interface nxopen.cae.responsesimulation.ResponseResultsEvaluationSettingBuilder
-
Returns the decimation order of domain setting.
- DECISION - Static variable in class nxopen.linedesigner.ConveyorStationFeatureBuilder.Type
-
- decisionAction() - Method in interface nxopen.validate.OverrideBuilder
-
Returns the decision action of override request
The decision action is automatically pending while override request is created.
- decisionUser() - Method in interface nxopen.validate.OverrideBuilder
-
Returns the decision user
The decision user is a Teamcenter user in the Validation Administration group.
- Deck - Interface in nxopen.features.shipdesign
-
Represents a Deck feature in Basic Design.
- DECK - Static variable in class nxopen.features.shipdesign.GeneralArrangementViewBuilder.ViewDirectionType
-
- deck() - Method in interface nxopen.features.shipdesign.RoomBuilder
-
Returns the deck body.
- DECK - Static variable in class nxopen.features.shipdesign.ShipDesignPreferencesBuilder.Types
-
Deck type
- DECK - Static variable in class nxopen.features.shipdesign.ShipnamesBuilderType
-
- DECK_FRAMES - Static variable in class nxopen.features.shipdesign.ShipSectionBuilder.ZFilter
-
- DECK_UNIT - Static variable in class nxopen.cae.MechanicalLoadSumBuilder.UserUnit
-
Load unit = same as Solver Deck Unit
- deckBody() - Method in interface nxopen.features.shipdesign.RoomContainerBuilder
-
Returns the deck body
License requirements: None.
- DeckBuilder - Interface in nxopen.features.shipdesign
-
This class is used to create or edit a
Deck
feature.
- DeckBuilder.Types - Class in nxopen.features.shipdesign
-
Indicates the method that is being used to define the mold face of the deck.
- deckCeilingHeightForCenterline() - Method in interface nxopen.linedesigner.PlatformEquipmentBuilder
-
Returns the deck ceiling height for centerline platform
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- deckCeilingHeightForPolyline() - Method in interface nxopen.linedesigner.PlatformEquipmentBuilder
-
Returns the deck ceiling height for polyline platform
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- deckCoord() - Method in interface nxopen.features.shipdesign.DeckListItemBuilder
-
Returns the expression containing the zCoord of Deck.
- deckCutoutsSection() - Method in interface nxopen.die.DieShoeBuilder
-
Returns the cutout sections in the main deck
License requirements: None.
- deckEdgeOffset() - Method in interface nxopen.tooling.DieDesDrawDieBuilder
-
Returns the deck edge offset, which is used for define the deck edge offset value of the die.
- deckElevationForCenterline() - Method in interface nxopen.linedesigner.PlatformEquipmentBuilder
-
Returns the deck elevation for centerline platform
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- deckElevationForPolyline() - Method in interface nxopen.linedesigner.PlatformEquipmentBuilder
-
Returns the deck elevation for polyline platform
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- deckEnum() - Method in interface nxopen.features.shipdesign.ShipIntersectionsBuilder
-
Returns the output option for the Longitudinal Z Frames
License requirements: None.
- deckFlangeThickness() - Method in interface nxopen.tooling.DieDesDrawDieBuilder
-
Returns the deck flange thickness, which is used for define the flange thickness of the die.
- deckHeightForCenterline() - Method in interface nxopen.linedesigner.PlatformEquipmentBuilder
-
Returns the deck height for centerline platform
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- deckHeightForPolyline() - Method in interface nxopen.linedesigner.PlatformEquipmentBuilder
-
Returns the deck height for polyline platform
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- deckingMaterial() - Method in interface nxopen.linedesigner.PlatformEquipmentBuilder
-
Returns the decking material
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- deckLengthForCenterline() - Method in interface nxopen.linedesigner.PlatformEquipmentBuilder
-
Returns the deck length for centerline platform
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- deckList() - Method in interface nxopen.features.shipdesign.DecksBuilder
-
- DeckListBuilder - Interface in nxopen.features.shipdesign
-
This builder allows you to define the general arrangement view information.
- DeckListItemBuilder - Interface in nxopen.features.shipdesign
-
Represents a DeckListItemBuilder.
- DeckListItemBuilder.DatumDir - Class in nxopen.features.shipdesign
-
Represents the thickening direction.
- DeckListItemBuilderList - Interface in nxopen.features.shipdesign
-
Represents a list of objects.
- deckName() - Method in interface nxopen.features.shipdesign.DeckListItemBuilder
-
Returns the deck name.
- deckParent() - Method in interface nxopen.die.DrawDiePunchBuilder
-
Returns the deck builder of the draw die punch.
- DeckParentBuilder - Interface in nxopen.die
-
Represents a Die Deck Feature sub feature.
- DeckParentBuilder.MainDeckData - Class in nxopen.die
-
- deckPlanSketch() - Method in interface nxopen.features.shipdesign.RoomContainerBuilder
-
Returns the deck plane sketch
License requirements: None.
- deckProfile() - Method in interface nxopen.tooling.DieDesignLowerBinderBuilder
-
Returns the deck profile used to create Lower Binder
License requirements: ug_die_design ("Die Design")
.
- decks() - Method in interface nxopen.annotations.BaseFrameBarBuilder
-
Returns the decks
License requirements: None.
- DECKS - Static variable in class nxopen.annotations.FrameBarElements
-
- DECKS - Static variable in class nxopen.annotations.ShipDimensionBuilder.GroupType
-
Group type Decks
- Decks - Interface in nxopen.features.shipdesign
-
Represents a decks feature
To create or edit an instance of this class, use
DecksBuilder
Created in NX5.0.0
- decks() - Method in interface nxopen.features.shipdesign.GeneralArrangementViewBuilder
-
Returns the decks
License requirements: nx_ship_gen_arrange ("Ship General Arrangement")
.
- DECKS - Static variable in class nxopen.features.shipdesign.ShipSectionBuilder.Type
-
- DecksBuilder - Interface in nxopen.features.shipdesign
-
Represents a
Decks
builder.
- decksLabelColor() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the label color
License requirements: None.
- decksLabelFont() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the label font
License requirements: None.
- decksLabelItalicized() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the label italicized
License requirements: None.
- decksLabelName() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the label name
License requirements: None.
- decksLabelWidth() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the label width
License requirements: None.
- decksStyle() - Method in interface nxopen.annotations.FrameBarStyleBuilder
-
Returns the style decks
License requirements: None.
- decksTicColor() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the tic color
License requirements: None.
- decksTicDisplay() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the decks tic display type
License requirements: None.
- decksTicFont() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the tic font
License requirements: None.
- decksTicLength() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the tic length
License requirements: None.
- decksTicWidth() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the tic width
License requirements: None.
- deckSupportEnum() - Method in interface nxopen.linedesigner.PlatformEquipmentBuilder
-
Returns the deck support type for platform
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- deckThickness() - Method in interface nxopen.die.DieShoeBuilder
-
Returns the deck thickness
License requirements: None.
- deckThickness() - Method in interface nxopen.die.DrawDiePunchSectionBuilder
-
Returns the deck thickness of the draw die punch casting.
- deckThickness() - Method in interface nxopen.die.KeywayBuilder
-
Returns the expression for the deck thickness
License requirements: None.
- deckThickness() - Method in interface nxopen.tooling.DieDesDrawDieBuilder
-
Returns the deck thickness, which is used for define the deck thickness of the die.
- deckThickness() - Method in interface nxopen.tooling.DieDesDrawPunchBuilder
-
Returns the deck thickness, which is used for define the deck thickness of the punch.
- deckThicknessForCenterline() - Method in interface nxopen.linedesigner.PlatformEquipmentBuilder
-
Returns the deck thickness for centerline platform
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- deckThicknessForPolyline() - Method in interface nxopen.linedesigner.PlatformEquipmentBuilder
-
Returns the deck thickness for polyline platform
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- deckWidthForCenterline() - Method in interface nxopen.linedesigner.PlatformEquipmentBuilder
-
Returns the deck width for centerline platform
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- DECLARE_VARIABLE - Static variable in class nxopen.cam.InspectionCmmCommandBuilder.CommandTypes
-
Enter a statement declaring a variable
- decode(String, String, int) - Method in interface nxopen.uf.UFClone
-
- decodePartFileName(String) - Method in interface nxopen.uf.UFUgmgr
-
- DecodePartFileNameData() - Constructor for class nxopen.uf.UFUgmgr.DecodePartFileNameData
-
- decomposeHandle(String) - Method in interface nxopen.uf.UFTag
-
- DecomposeHandleData() - Constructor for class nxopen.uf.UFTag.DecomposeHandleData
-
- DECOMPOSITION - Static variable in class nxopen.routing.InterfaceTerminalRelationshipBase.RelationType
-
- decPlaces - Variable in class nxopen.uf.UFSket.AskLegacyPreferencesData
-
- decPlaces - Variable in class nxopen.uf.UFSket.AskPreferencesData
-
- DECREASE - Static variable in class nxopen.motion.JointFrictionAdams.FrictionOverlapDelta
-
- DECREASE - Static variable in class nxopen.motion.JointFrictionRecurDyn.FrictionOverlapDelta
-
- DECREMENT - Static variable in class nxopen.mechatronics.GanttOperationParameterBuilder.OperatorOption
-
Decrement operator '-='
- DEEP_AQUA_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DEEP_AZURE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DEEP_BLUE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DEEP_BROWN_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DEEP_CARROT_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DEEP_COBALT_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DEEP_CORAL_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DEEP_CORNFLOWER_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DEEP_CRIMSON_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DEEP_CYAN_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DEEP_EMERALD_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DEEP_FOREST_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DEEP_FUCHSIA_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DEEP_GOLD_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DEEP_GREEN_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DEEP_ICE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DEEP_INDIGO_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DEEP_KHAKI_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DEEP_LAVENDER_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DEEP_LEAF_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DEEP_LEMON_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DEEP_LIME_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DEEP_MAGENTA_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DEEP_MAROON_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DEEP_MIDNIGHT_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DEEP_MINT_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DEEP_MOSS_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DEEP_OLIVE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DEEP_ORANGE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DEEP_PEACH_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DEEP_PINE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DEEP_PINK_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DEEP_PISTACHIO_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DEEP_PLUM_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DEEP_PURPLE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DEEP_RED_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DEEP_ROYAL_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DEEP_SALMON_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DEEP_SEA_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DEEP_SKY_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DEEP_SPRING_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DEEP_STEEL_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DEEP_STONE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DEEP_TAN_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DEEP_TEAL_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DEEP_TURQUOISE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DEEP_UMBER_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DEEP_VIOLET_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- DEEP_YELLOW_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- defAssociative() - Method in interface nxopen.tooling.ProfileSplitBuilder
-
Returns the associative flag
License requirements: None.
- DEFAULT - Static variable in class nxopen.ame.EngineeringObjectAspectDetailBuilder.NameSource
-
- DEFAULT - Static variable in class nxopen.assemblies.ClearanceAnalysisBuilder.ClearanceZoneSource
-
- DEFAULT - Static variable in class nxopen.assemblies.ComponentAssembly.CheckinCheckoutOption
-
Check In or Check Out option is determined by the system using whatever option is appropriate for the selected object type.
- DEFAULT - Static variable in class nxopen.cae.FreeBodyResultsBuilder.OutputUnits
-
same as Solver Deck Unit
- DEFAULT - Static variable in class nxopen.cae.LaminateDrapingDataBuilder.SecondaryVectorType
-
default
- DEFAULT - Static variable in class nxopen.cae.ModelDisplayBuilder.ElmClrBasis
-
Default
- DEFAULT - Static variable in class nxopen.cae.Post.BandStyle
-
- DEFAULT - Static variable in class nxopen.cae.Result.InitialDeformationSelection
-
Default selection
- DEFAULT - Static variable in class nxopen.cam.DmAmBuilder.OrderRegionsOptTypes
-
Default, Steep First
- DEFAULT - Static variable in class nxopen.cam.InspectionPathBuilder.InspectModeType
-
Default from method
- DEFAULT - Static variable in class nxopen.die.AddendumSectionBuilder.SectionOrientationType
-
Orient perpendicular to tangency curve.
- DEFAULT - Static variable in class nxopen.display.ImageBaseBuilder.InsertionPoint
-
default insertion point type
- DEFAULT - Static variable in class nxopen.display.TrueShadingBuilder.EnvironmentMapType
-
No reflection map
- DEFAULT - Static variable in class nxopen.DxfdwgCreator.ExportScaleOptions
-
Default scale(1:1)
- DEFAULT - Static variable in class nxopen.features.sheetmetal.FlatSolidBuilder.OrientationType
-
do not orient flat solid body
- DEFAULT - Static variable in class nxopen.features.shipdesign.ExpansionDrawingBuilder.JaExpansiondrawingbuilderEnglishScale
-
default scale
- DEFAULT - Static variable in class nxopen.features.shipdesign.ExpansionDrawingBuilder.JaExpansiondrawingbuilderMetricScale
-
default scale
- DEFAULT - Static variable in class nxopen.features.shipdesign.ShipDesignPreferencesBuilder.ColorType
-
default type
- DEFAULT - Static variable in class nxopen.features.vehicledesign.PedestrianProtectionBuilder.Font
-
Default Font
- DEFAULT - Static variable in class nxopen.features.vehicledesign.PedestrianProtectionBuilder.Width
-
Default Width
- DEFAULT - Static variable in class nxopen.JtCreator.RefsetOption
-
DEFAULT
- DEFAULT - Static variable in class nxopen.LineWidthOption
-
Default width.
- DEFAULT - Static variable in class nxopen.pdm.PartBuilder.Operation
-
Default UG/Manager part selection dialog
- DEFAULT - Static variable in class nxopen.pdm.PartOperationCopyBuilder.OperationSubType
-
Save As dialog
- DEFAULT - Static variable in class nxopen.pdm.PartOperationImportBuilder.ExistingPartAction
-
- DEFAULT - Static variable in class nxopen.pdm.PartOperationImportBuilder.Validation
-
- DEFAULT - Static variable in class nxopen.tooling.InitProjBuilder.ProjTempOption
-
Indicates that the project template is 'Default'.
- DEFAULT - Static variable in class nxopen.tooling.InitProjectBuilder.ConfigurationId
-
Default configuration
- DEFAULT - Static variable in class nxopen.tooling.RenameAndExportComponentBuilder.NameRuleType
-
- DEFAULT - Static variable in class nxopen.uf.UFParam.Status
-
- DEFAULT - Static variable in class nxopen.uistyler.Attachment.AttachType
-
Default type
- DEFAULT - Static variable in class nxopen.weld.DatumCommonBuilder.CreationDirectionMethods
-
Use the default construction method
- DEFAULT - Static variable in class nxopen.weld.DatumCommonBuilder.CustomTypes
-
A datum surface or pin specified in the customer defaults by the Default type.
- DEFAULT - Static variable in class nxopen.weld.FilletBuilder.EnumConstructionMethod
-
- DEFAULT - Static variable in class nxopen.weld.WeldCreationDirection
-
Default construction direction
- DEFAULT1 - Static variable in class nxopen.weld.WeldBeadSizeBuilder.Size
-
Default1 from the customer defaults
- DEFAULT2 - Static variable in class nxopen.weld.WeldBeadSizeBuilder.Size
-
Default2 from the customer defaults
- DEFAULT3 - Static variable in class nxopen.weld.WeldBeadSizeBuilder.Size
-
Default3 from the customer defaults
- DEFAULT4 - Static variable in class nxopen.weld.WeldBeadSizeBuilder.Size
-
Default4 from the customer defaults
- DEFAULT5 - Static variable in class nxopen.weld.WeldBeadSizeBuilder.Size
-
Default5 from the customer defaults
- DEFAULT_ACTION - Static variable in class nxopen.uf.UFClone.Action
-
- DEFAULT_COLOR - Static variable in class nxopen.preferences.PartObject.ColorSelection
-
Default Color
- DEFAULT_DISPLAY_TYPE - Static variable in class nxopen.uf.UFGdt.LimitsAndFitsDisplayType
-
- DEFAULT_FILE_FONTS - Static variable in class nxopen.uf.UFCgm.Fonts
-
- DEFAULT_FILE_WIDTHS - Static variable in class nxopen.uf.UFCgm.Widths
-
- DEFAULT_LIGHTS - Static variable in class nxopen.display.TrueShadingBuilder.SHEDLightCollectionType
-
Scene lighting collection 1
- DEFAULT_NAMING - Static variable in class nxopen.uf.UFClone.NamingTechnique
-
- DEFAULT_ROUTE - Static variable in class nxopen.routing.electrical.ElectricalStockDevice.RouteTypes
-
- DEFAULT_STOCK - Static variable in class nxopen.routing.PathStockBuilder.AssignMethod
-
Default Stock.
- DEFAULT_TIME - Static variable in class nxopen.motion.GraphBuilder.XAxisTypeChoices
-
Deprecated.
Time
- DEFAULT_UNIT - Static variable in class nxopen.cae.SolidPropertyCheckBuilder.UserUnit
-
Load unit = same as system default unit
- DEFAULT_UV - Static variable in class nxopen.display.CgfxMattexBuilder.TextureSpace
-
Deprecated.
scale 1, 0 offset uv texture space
- DEFAULT_VALUE - Static variable in class nxopen.ame.MultiValueObjectsPort.JaAmeValueObjectUsageType
-
- DEFAULT_VIEW - Static variable in class nxopen.tooling.AssemblyDrawingBuilder.ViewOptionValue
-
- defaultAction() - Method in interface nxopen.pdm.PartOperationImportBuilder
-
Returns the default action
License requirements: None.
- defaultAction - Variable in class nxopen.uf.UFClone.GenLogOpts
-
- defaultAlternateIdContext() - Method in interface nxopen.pdm.PartOperationImportBuilder
-
Returns the method returns the IdContext to be used while assigning alternate IDs during import
License requirements: None.
- defaultAlternateIdType() - Method in interface nxopen.pdm.PartOperationImportBuilder
-
Returns the method returns the IdType to be used while assigning alternate IDs during import
License requirements: None.
- defaultArcNamePrefix() - Method in interface nxopen.preferences.SessionSketch
-
Returns the default arc name prefix
License requirements: None.
- defaultBaf - Variable in class nxopen.uf.UFSmd.GenPrefs
-
- defaultBodyRulesAsString() - Method in interface nxopen.blockstyler.BodyCollector
-
Returns the DefaultBodyRules as string
License requirements: None.
- defaultBoolean() - Method in interface nxopen.AttributeTemplatesBuilder
-
Returns the default boolean.
- defaultColumnWidth() - Method in interface nxopen.blockstyler.SetList
-
Returns the DefaultColumnWidth
License requirements: None.
- defaultConicNamePrefix() - Method in interface nxopen.preferences.SessionSketch
-
Returns the default conic name prefix
License requirements: None.
- defaultCurveRulesAsString() - Method in interface nxopen.blockstyler.CurveCollector
-
Returns the DefaultCurveRules as string
License requirements: None.
- defaultCurveRulesAsString() - Method in interface nxopen.blockstyler.SectionBuilder
-
Returns the DefaultCurveRules as string
License requirements: None.
- defaultCurveRulesAsString() - Method in interface nxopen.blockstyler.SuperPoint
-
Returns the DefaultCurveRules as string
License requirements: None.
- defaultCurveRulesAsString() - Method in interface nxopen.blockstyler.SuperSection
-
Returns the DefaultCurveRules as string
License requirements: None.
- defaultDate() - Method in interface nxopen.AttributeTemplatesBuilder
-
Returns the default date.
- defaultDescription() - Method in interface nxopen.pdm.PartOperationImportBuilder
-
Returns the default description
License requirements: None.
- defaultDestinationFolder() - Method in interface nxopen.pdm.ObjectCreateBuilder
-
Returns the default destination folder string for the object being created.
- defaultDestinationFolder() - Method in interface nxopen.pdm.PartOperationBuilder
-
Returns the default destination folder string for the part being created .
- defaultDraw() - Method in interface nxopen.die.AddendumSectionBuilder
-
Create default draw vector based upon the input product faces.
- defaultDraw() - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
Creates a default draw vector by finding the least squares plane of the formed faces
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- defaultEdgeContinuity() - Method in interface nxopen.features.FillHoleBuilder
-
Returns the default continuity of edges.
- defaultElbowNode() - Method in interface nxopen.preferences.RoutingPart
-
Returns the node in the part library to use for searching for the default
elbow to place during create path.
- defaultElementSize() - Method in interface nxopen.cae.ShipMeshAutomationBuilder
-
Returns the flag to indicate whether to use the default mesh element size which is evaluated automatically
License requirements: nx_masterfem ("Finite Element Modeling"), nx_ship_basic ("Ship Basic Design")
.
- defaultFaceRulesAsString() - Method in interface nxopen.blockstyler.FaceCollector
-
Returns the DefaultFaceRules as string
License requirements: None.
- defaultFunctionAttributes() - Method in interface nxopen.cae.SimLoadRecipeSource
-
- defaultInteger() - Method in interface nxopen.AttributeTemplatesBuilder
-
Returns the default integer.
- defaultItemType() - Method in interface nxopen.pdm.PartOperationImportBuilder
-
Returns the default item type
License requirements: None.
- defaultJumperLength() - Method in interface nxopen.preferences.RoutingElectrical
-
Returns the default length of a jumper wire.
- defaultLayupOffset() - Method in interface nxopen.cae.LaminateGlobalLayupMgr
-
Returns the default layup offset
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- defaultLineNamePrefix() - Method in interface nxopen.preferences.SessionSketch
-
Returns the default line name prefix
License requirements: None.
- defaultMaterialOrientation() - Method in interface nxopen.cae.LaminateGlobalLayupMgr
-
Returns the default material orientation
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- defaultMaterialTemperature() - Method in interface nxopen.cae.DurabilityEventOverridesBuilder
-
Returns the default material temperature.
- defaultName() - Method in interface nxopen.pdm.PartOperationImportBuilder
-
Returns the default name
License requirements: None.
- defaultNaming - Variable in class nxopen.uf.UFClone.GenLogOpts
-
- defaultNumber() - Method in interface nxopen.AttributeTemplatesBuilder
-
Returns the default number.
- defaultOperationType() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns the default inspection operation type
License requirements: None.
- defaultOrientationAlignmentEnabled() - Method in interface nxopen.routing.PathStockBuilder
-
Get the flag if non-circular stock default alignment is enabled
License requirements: routing_base ("Routing Basic")
.
- defaultOwningGroup() - Method in interface nxopen.pdm.PartOperationImportBuilder
-
Returns the default owning group
License requirements: None.
- defaultOwningUser() - Method in interface nxopen.pdm.PartOperationImportBuilder
-
Returns the default owning user
License requirements: None.
- defaultPlane() - Method in interface nxopen.annotations.PmiPreferences
-
Returns the default annotation plane for PMI symbols
License requirements: None.
- defaultPlaneAxis() - Method in interface nxopen.display.DynamicSectionBuilder
-
Returns the axis indicating the default plane normal.
- DefaultProjectInformationData() - Constructor for class nxopen.pdm.PartOperationImportBuilder.DefaultProjectInformationData
-
- defaultRefSets - Variable in class nxopen.uf.UFAssem.AskDefaultRefSetsData
-
- defaultRegionStartType() - Method in interface nxopen.cam.NcmSubopBuilder
-
Returns the region start type
License requirements: None.
- defaultRpoMenu(Tag) - Method in interface nxopen.uf.UFModlUi
-
- DEFAULTS - Static variable in class nxopen.routing.TransformPathBuilder.CopyAttributes
-
Copy Attributes as per defaults.
- defaultSketchNamePrefix() - Method in interface nxopen.preferences.SessionSketch
-
Returns the default sketch name prefix
License requirements: None.
- defaultSplineNamePrefix() - Method in interface nxopen.preferences.SessionSketch
-
Returns the default spline name prefix
License requirements: None.
- DefaultStandardTextFontData() - Constructor for class nxopen.preferences.VisualizationFonts.DefaultStandardTextFontData
-
- DefaultStockData() - Constructor for class nxopen.preferences.RoutingStock.DefaultStockData
-
- defaultStockStyle() - Method in interface nxopen.preferences.RoutingStock
-
Returns the default stock style
License requirements: routing_base ("Routing Basic")
.
- defaultString() - Method in interface nxopen.AttributeTemplatesBuilder
-
Returns the default string.
- defaultString - Variable in class nxopen.uf.UFPlist.ColPrefs
-
- defaultTemperatureOption() - Method in interface nxopen.cae.SolidPropertyCheckBuilder
-
Returns the output mass split option option
License requirements: None.
- defaultText() - Method in interface nxopen.annotations.TableColumnBuilder
-
Returns the default text specifies the default text set for the column cells.
- defaultThickness() - Method in interface nxopen.features.ShellBuilder
-
Returns the default thickness for the shelled body.
- defaultThicknessFlip() - Method in interface nxopen.features.ShellBuilder
-
Returns the flip direction option for default thickness.
- defaultValidationOpts - Variable in class nxopen.uf.UFClone.GenLogOpts
-
- defaultValue() - Method in interface nxopen.fields.FieldVariable
-
Returns the variable's default value which is value used when evaluating a field and no value is specified
License requirements: None.
- defaultValue() - Method in interface nxopen.report.DoubleArgument
-
Returns the arguement dafault value.
- defaultValue() - Method in interface nxopen.report.EnumerationArgument
-
Returns the argument default value.
- defaultValue() - Method in interface nxopen.report.IntegerArgument
-
Returns the argument default value.
- defaultValue() - Method in interface nxopen.report.StringArgument
-
Returns the argument default value.
- defaultVertexNamePrefix() - Method in interface nxopen.preferences.SessionSketch
-
Returns the default vertex name prefix
License requirements: None.
- deferCurveUpdate() - Method in interface nxopen.display.DynamicSectionBuilder
-
Returns the defer curve update property.
- deferCuttingStatus() - Method in interface nxopen.cam.PlanarOperationBuilder
-
Returns the defer cutting status value
License requirements: None.
- DEFERRED - Static variable in class nxopen.cam.CutRegionsBuilder.CutRegionsStatusTypes
-
Deferred
- deferredDelayed - Variable in class nxopen.PartDelayedUpdateStatus.DelayStatusInfo
-
The part is deferred delayed.
- DEFEVAL - Static variable in class nxopen.uf.UFKf.Type
-
- defFeat - Variable in class nxopen.uf.UFGdt.DatumIdentifier
-
- defFeat - Variable in class nxopen.uf.UFGdt.MultipleDatum
-
- DEFINE_CSYS - Static variable in class nxopen.features.shipdesign.InverseBendingLinesBuilder.ReferencePlaneType
-
User defined plane.
- DEFINE_HOME_POINT - Static variable in class nxopen.cam.InspectionCmmCommandBuilder.CommandTypes
-
Enter a statement defining the home point
- DEFINE_PCSFROM_ACTUAL_DEVIATIONS - Static variable in class nxopen.cam.InspectionAlignmentBuilder.AlignTypes
-
Locate PCS from Features
- DEFINE_PCSFROM_DATUMS - Static variable in class nxopen.cam.InspectionAlignmentBuilder.AlignTypes
-
Define the PCS from datums
- DEFINE_PRE_BENDS - Static variable in class nxopen.tooling.DirectUnfoldBuilder.Types
-
the direct unfold type of define pre-bends
- defineAspectBuilder(Part) - Method in interface nxopen.ame.AMEManager
-
Creates a
DefineAspectBuilder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
Created in NX11.0.0
- DefineAspectBuilder - Interface in nxopen.ame
-
- defineBases() - Method in interface nxopen.die.DieAssistantFlangeProfile
-
TODO: fill in a description for this
License requirements: ug_die_design ("Die Design")
.
- defineBases() - Method in interface nxopen.die.DieAssistantTrimProfile
-
TODO: fill in a description for this
License requirements: ug_die_design ("Die Design")
.
- DefineBoundary() - Constructor for class nxopen.uf.UFDraw.DefineBoundary
-
- DefineBoundary(Tag) - Constructor for class nxopen.uf.UFDraw.DefineBoundary
-
- defineBoundByObjects(Tag, int, Tag[]) - Method in interface nxopen.uf.UFDraw
-
- defineBy() - Method in interface nxopen.tooling.RenameAndExportComponentBuilder
-
Returns the define by
License requirements: None.
- defineByPathOption() - Method in interface nxopen.cae.PostGraphAlongPathBuilder
-
Returns a value indicating whether the x axis is define by a path ID.
- defineByViewOrHolesEnum() - Method in interface nxopen.tooling.HoleManufacturingNoteBuilder
-
Returns the selection type enumeration
License requirements: None.
- DefineCamBuilder - Interface in nxopen.tooling
-
- DefineCamBuilder.PredefinedHydraulicOptions - Class in nxopen.tooling
-
Specifies the predefined hydraulic motion types
- DefineCamBuilder.Types - Class in nxopen.tooling
-
Specifies the cam types
- DefineComponentAnchorPointBuilder - Interface in nxopen.layout2d
-
- DefineComponentBuilder - Interface in nxopen.layout2d
-
- defineConnectVector() - Method in interface nxopen.tooling.CoolingConnectBuilder
-
Returns the value which specifies whether to define the vector of the connect channel or not.
- DEFINED - Static variable in class nxopen.assemblies.ClearanceAnalysisBuilder.ClearanceZoneSource
-
- defined - Variable in class nxopen.cae.CorrelAlignmentBuilder.ReferencePt
-
- DEFINED - Static variable in class nxopen.drawings.HingeLineBuilder.Hingeline
-
The option for selecting hinge line using vector construction tools
- DEFINED - Static variable in class nxopen.JtCreator.TessellationOption
-
defined level
- DEFINED - Static variable in class nxopen.ListCreator.TessellationOption
-
defined level
- DefinedAttributesExpressionsData() - Constructor for class nxopen.tooling.SpreadsheetData.DefinedAttributesExpressionsData
-
- definedBy() - Method in interface nxopen.die.SpringbackCompensationBuilder
-
Returns the type of data that will be used to define the feature.
- defineField(Tag, int, String, String, String, UFPlist.FieldFormat, int, int, int) - Method in interface nxopen.uf.UFPlist
-
- defineGlobalSizeToggle() - Method in interface nxopen.linedesigner.ColumnGridEquipmentBuilder
-
Returns the define global size toggle of column grid
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- DEFINEIN_NX - Static variable in class nxopen.pdm.ConfigurationContextBuilder.ConfigurationDetail
-
- defineKinematicChains() - Method in interface nxopen.sim.KinematicConfigurator
-
Creates a builder for a kinematic chain configurator
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- DefineLifterBuilder - Interface in nxopen.tooling
-
Represents a
DefineLifterBuilder
to create different types of lifter objects, which
are used for kinematic motion.
- DefineLifterBuilder.Types - Class in nxopen.tooling
-
Specifies the lifter types
- defineNeutralFactor() - Method in interface nxopen.tooling.BendOperationBuilder
-
Returns the define neutral factor builder which contains new neutral factor, part material and bend developed length
License requirements: None.
- defineNeutralFactor() - Method in interface nxopen.tooling.DirectUnfoldBuilder
-
Returns the define neutral factor builder which contains new neutral factor, part material and bend developed length
License requirements: None.
- defineNeutralFactor() - Method in interface nxopen.tooling.UniversalUnformBuilder
-
Returns the define neutral factor builder which contains new neutral factor, part material and bend developed length
License requirements: None.
- DefineNeutralFactorBuilder - Interface in nxopen.tooling
-
- DefineNeutralFactorBuilder.FormulaOptions - Class in nxopen.tooling
-
Specifies the formula used to calculate the neutral factor value
- DEFINEOR_LOAD_CONTEXT - Static variable in class nxopen.pdm.ConfigurationContextBuilder.ConfigContextType
-
- definePalette() - Method in interface nxopen.PlotColorsWidthsBuilder
-
Initialize the Color Palette.
- definePalette() - Method in interface nxopen.PrintPDFBuilder
-
Initialize the Color Palette.
- DefineRunBuilder - Interface in nxopen.routing
-
- defineSharedBodyInput() - Method in interface nxopen.geometricutilities.PartModuleInputBuilder
-
Returns the shared body inputs option.
- defineSpringback() - Method in interface nxopen.tooling.DieEngStampingOutputBuilder
-
The define springback method
License requirements: die_engineering ("DIE ENGINEERING")
.
- defineStartPoint() - Method in interface nxopen.tooling.CoolingConnectBuilder
-
Returns the value which specifies whether to define the start point or not.
- defineStep() - Method in interface nxopen.tooling.MWDefineSheetsBuilder
-
Returns the define step for defining Cavity and Core using the Split Body method
License requirements: None.
- defineSymPlyidRange(int, int) - Method in interface nxopen.cae.Laminate
-
Defines the range of id to be used for symmetric and repeated plies.
- defineSymPlyidRange(int, int) - Method in interface nxopen.cae.LaminateGlobalLayup
-
Defines the range of id to be used for symmetric and repeated plies.
- DefineTitleBlockBuilder - Interface in nxopen.annotations
-
- DefineTitleBlockBuilder - Interface in nxopen.diagramming
-
- defineValue - Variable in class nxopen.uf.UFModl.UdfsExp
-
- defineViewAutoRect(Tag) - Method in interface nxopen.uf.UFDraw
-
- defineViewBoundary(Tag, int, UFDraw.DefineBoundary[]) - Method in interface nxopen.uf.UFDraw
-
- defineViewBoundary1(Tag, int, UFDraw.DefineBoundary[]) - Method in interface nxopen.uf.UFDraw
-
- defineViewManualRect(Tag, double[]) - Method in interface nxopen.uf.UFDraw
-
- defineWidths() - Method in interface nxopen.PlotColorsWidthsBuilder
-
Initialize the Width dialog.
- defineWidths() - Method in interface nxopen.PrintPDFBuilder
-
Initialize the Width dialog.
- DefineWorkRegionBuilder - Interface in nxopen.features.subdivision
-
- DefineWorkRegionBuilder.FrozenRegionDefinitionMethods - Class in nxopen.features.subdivision
-
Method of defining frozen region.
- DefineWorkRegionBuilder.WorkRegionDefinitionMethods - Class in nxopen.features.subdivision
-
Method of defining work region.
- DEFINING - Static variable in class nxopen.annotations.AssociativityPointOption
-
Spline defining point
- DEFINING - Static variable in class nxopen.InferSnapType.SnapType
-
Snap point at defining
- DEFINING_POINTS - Static variable in class nxopen.features.PointSetBuilder.SplinePointsType
-
Points will be created at spline defining points.
- definingCurve - Variable in class nxopen.uf.UFCurve.AskProjCurveParentsData
-
- definingCurve - Variable in class nxopen.uf.UFCurve.AskWrapCurveParentsData
-
- DefiningData() - Constructor for class nxopen.FaceAllBlendRule.DefiningData
-
- DefiningData() - Constructor for class nxopen.FaceBossPocketFacesRule.DefiningData
-
- DefiningData() - Constructor for class nxopen.FaceConnectedBlendRule.DefiningData
-
- DefiningData() - Constructor for class nxopen.FaceMergedRibFacesRule.DefiningData
-
- DefiningData() - Constructor for class nxopen.FaceRibFacesRule.DefiningData
-
- DefiningData() - Constructor for class nxopen.FaceSlotFacesRule.DefiningData
-
- definingFace - Variable in class nxopen.uf.UFCurve.AskWrapCurveParentsData
-
- definingFace1 - Variable in class nxopen.uf.UFModeling.AskFacepairParmsData
-
- definingFace2 - Variable in class nxopen.uf.UFModeling.AskFacepairParmsData
-
- definingFeature - Variable in class nxopen.uf.UFCurve.AskProjCurveParentsData
-
- definingNxObject() - Method in interface nxopen.routing.ItemDefinition
-
Returns the NX object associated with the item definition object.
- definingObject - Variable in class nxopen.uf.UFCurve.SectionCurveAskParentsData
-
- definingObjectsAdded() - Method in interface nxopen.assemblies.CreateNewComponentBuilder
-
Returns the defining objects added toggle
License requirements: None.
- definingPlane - Variable in class nxopen.uf.UFCurve.AskWrapCurveParentsData
-
- definingPoint() - Method in interface nxopen.routing.OverstockBuilder
-
- definingPoints - Variable in class nxopen.uf.UFDraw.ViewBoundary
-
- definingTarget - Variable in class nxopen.uf.UFCurve.AskProjCurveParentsData
-
- definingType() - Method in interface nxopen.routing.SplinePathBuilder
-
Returns the type which specifies the shape of the spline.
- definition() - Method in interface nxopen.cae.optimization.TBSGroupDefinition
-
Returns the definition type
License requirements: None.
- definition() - Method in interface nxopen.features.UserDefinedFeatureCreateEvent
-
Returns the user defined feature definition
License requirements: None.
- definition() - Method in interface nxopen.Layout
-
Returns the definition of the layout.
- definition() - Method in interface nxopen.motion.AdvancedSolutionBuilder
-
Returns the definition of text based element - MDF definition
License requirements: mechanisms ("MECHANISMS")
.
- definition() - Method in interface nxopen.motion.TextBasedElementBuilder
-
Returns the definition of text based element - MDF definition
License requirements: mechanisms ("MECHANISMS")
.
- definition() - Method in interface nxopen.routing.OverstockApplication
-
Returns the method used to define the overstock application.
- definition - Variable in class nxopen.uf.UFGdt.DrfReference
-
- definition - Variable in class nxopen.uf.UFMotion.Function
-
- definitionCurves() - Method in interface nxopen.features.shipdesign.SeamBuilder
-
Returns the curves selected or sketched that will be projected onto the ship structure to create the seam.
- definitionEquallySpacedCurve1() - Method in interface nxopen.features.shipdesign.SeamBuilder
-
Returns the first curve that will be used as a boundary for the equally spaced seams.
- definitionEquallySpacedCurve2() - Method in interface nxopen.features.shipdesign.SeamBuilder
-
Returns the second curve that will be used as a boundary for the equally spaced seams.
- definitionEquallySpacedNumber() - Method in interface nxopen.features.shipdesign.SeamBuilder
-
Returns the number of seams to create between the two boundary curves selected.
- definitionEquallySpacedPlaneList() - Method in interface nxopen.features.shipdesign.SeamBuilder
-
Returns the list of planes defined that will be used to specify key points to create the seam.
- definitionfilename - Variable in class nxopen.sim.IsvControlPanelBuilder.PostprocessorFilenameData
-
The definition filename with full path
- definitionIndex() - Method in interface nxopen.cae.qualityaudit.FreeEdgeDistanceResult
-
Returns the definition index of the point close to edge.
- definitionIndex() - Method in interface nxopen.cae.qualityaudit.MeshLevelFailedElementCreationResult
-
Returns the definition index of the failing element creation.
- definitionIndex() - Method in interface nxopen.cae.qualityaudit.MeshLevelFailedProjectionResult
-
Returns the definition index of the failing projection.
- definitionIndex() - Method in interface nxopen.cae.qualityaudit.MeshLevelFailedProjectionToleranceResult
-
Returns the definition index of the tolerance failing mesh projection.
- definitionIndex() - Method in interface nxopen.cae.qualityaudit.ObjectLevelCorrectedProjectionResult
-
Returns the definition index of the corrected projection.
- definitionIndex() - Method in interface nxopen.cae.qualityaudit.ObjectLevelFailedProjectionResult
-
Returns the definition index of the failing projection.
- definitionIndex() - Method in interface nxopen.cae.qualityaudit.ObjectLevelFailedProjectionToleranceResult
-
Returns the definition index of the tolerance failing projection.
- definitionIndex1() - Method in interface nxopen.cae.qualityaudit.ConnectionPointsDistanceResult
-
Returns the definition index of the first point.
- definitionIndex2() - Method in interface nxopen.cae.qualityaudit.ConnectionPointsDistanceResult
-
Returns the definition index of the second point.
- definitionMethod() - Method in interface nxopen.features.shipdesign.SeamBuilder
-
Returns the method used to define the seam locations.
- definitionMethod() - Method in interface nxopen.motion.SplineBeamBuilder
-
Returns the definition method
License requirements: mechanisms ("MECHANISMS")
.
- definitionMethodOption() - Method in interface nxopen.validate.RequirementBuilder
-
Returns the definition method option
License requirements: None.
- definitionObjects() - Method in interface nxopen.features.shipdesign.SeamBuilder
-
Returns the sheet bodies or curves representing ship structure, that will be intersected with or projected onto the
ship structure to create the seam.
- definitionPlaneList() - Method in interface nxopen.features.shipdesign.SeamBuilder
-
Returns the list of planes defined that will be intersected with the ship structure to create the seam.
- definitionProjectionDirection() - Method in interface nxopen.features.shipdesign.SeamBuilder
-
Returns the direction to project curves to the ship structure to define seams.
- definitionRectangularCorner() - Method in interface nxopen.features.shipdesign.SeamBuilder
-
Returns the starting corner of the rectangular grid that defines the seams.
- definitionRectangularLength() - Method in interface nxopen.features.shipdesign.SeamBuilder
-
Returns the size of each rectangle of the grid in the length direction.
- definitionRectangularLengthDirection() - Method in interface nxopen.features.shipdesign.SeamBuilder
-
Returns the length direction of the rectangular grid that defines the seams.
- definitionRectangularPlane() - Method in interface nxopen.features.shipdesign.SeamBuilder
-
Returns the plane of the rectangular grid that defines the seams.
- definitionRectangularWidth() - Method in interface nxopen.features.shipdesign.SeamBuilder
-
Returns the size of each rectangle of the grid perpendicular to the length direction.
- definitionReferenceProperties() - Method in interface nxopen.layout2d.ExportComponentHierarchyBuilder
-
Returns the flag indicating whether to export definition reference properties for components
License requirements: None.
- definitions() - Method in interface nxopen.layout2d.ExportComponentHierarchyBuilder
-
Returns the flag indicating whether to export definitions for components
License requirements: None.
- definitiontype - Variable in class nxopen.cam.MillingTrackpointBuilder.TrackPointData
-
the definition type
- defNum() - Method in interface nxopen.tooling.ElectrodeCopyBuilder
-
Returns the number of transform
License requirements: None.
- DEFORM - Static variable in class nxopen.features.sheetmetal.SheetmetalFaceType
-
- deform() - Method in interface nxopen.geometricutilities.CurveShapingBuilder
-
Deforms curves based on active points
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- DEFORM_NEGATIVE - Static variable in class nxopen.uf.UFModl.FeatureSigns
-
- DEFORM_POSITIVE - Static variable in class nxopen.uf.UFModl.FeatureSigns
-
- deformation() - Method in interface nxopen.cae.NodalForceReportBuilder
-
Returns the deformation
License requirements: None.
- deformationDirectionMethod() - Method in interface nxopen.features.GlobalShapingBuilder
-
Returns the deformation direction method
License requirements: None.
- deformationDirectionReverse() - Method in interface nxopen.features.GlobalShapingBuilder
-
Returns the deformation direction reverse
License requirements: None.
- deformationDirectionVector() - Method in interface nxopen.features.GlobalShapingBuilder
-
Returns the deformation direction vector
License requirements: None.
- deformationFactor() - Method in interface nxopen.die.SpringbackCompensationBuilder
-
Returns the deformation factor determines how much of the calculated deformation is applied to the result body.
- DeformationParameters - Interface in nxopen.cae
-
This class is worked as a packet of information that can be be used to deform
Post
objects.
- DeformationParameters() - Constructor for class nxopen.cae.Result.DeformationParameters
-
Deprecated.
- DeformationParameters(int, int, Result.Type, Result.Complex, double, Result.DeformationScale, double, double) - Constructor for class nxopen.cae.Result.DeformationParameters
-
Deprecated.
Constructor for the DeformationParameters object.
- deformationScale - Variable in class nxopen.cae.Result.DeformationParameters
-
Deprecated.
- deformationType() - Method in interface nxopen.cae.DeformationParameters
-
Returns the type of scale used for deforming the model
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- deformationType() - Method in interface nxopen.features.GlobalShapingBuilder
-
Returns the deformation type
License requirements: None.
- deformBody() - Method in interface nxopen.facet.SewFacetBodyBuilder
-
Returns the deform body to be sewed
License requirements: None.
- DeformData() - Constructor for class nxopen.uf.UFAssem.DeformData
-
- DeformData(Tag, UFModl.UdfsDefData, String) - Constructor for class nxopen.uf.UFAssem.DeformData
-
- deformData - Variable in class nxopen.uf.UFAssem.DeformPartData
-
- DeformDefinitionBuilder - Interface in nxopen.features
-
Used as a place holder for selected member features, expressions and external references for a deform
definition feature record that is to be created.
- DeformDefinitionBuilder.ExpressionType - Class in nxopen.features
-
Specifies the way of providing input to expression during deform instantiation.
- DeformDefinitionBuilder.JaDeformDefinitionExpData - Class in nxopen.features
-
- DeformDefinitionBuilder.RangeType - Class in nxopen.features
-
- deformDistance() - Method in interface nxopen.facet.SewFacetBodyBuilder
-
Returns the distance to control the deform area on the deform body
License requirements: None.
- DEFORMED - Static variable in class nxopen.routing.StockUse
-
Stock has been deformed using the "Deform Component"
functionality.
- DeformedDefinitionData() - Constructor for class nxopen.uf.UFAssem.DeformedDefinitionData
-
- DeformedDefinitionData(Tag, Tag[], String[], int, Tag[], String[], int, String) - Constructor for class nxopen.uf.UFAssem.DeformedDefinitionData
-
- deformedFeatureTag - Variable in class nxopen.uf.UFAssem.AssemblyDeformPartData
-
- deformedScale - Variable in class nxopen.uf.UFSf.MeshVisuals
-
- deformPart(UFAssem.AssemblyDeformPartData) - Method in interface nxopen.uf.UFAssem
-
- DeformPartData() - Constructor for class nxopen.uf.UFAssem.DeformPartData
-
- DeformPartWarnings() - Constructor for class nxopen.uf.UFAssem.DeformPartWarnings
-
- DeformPartWarnings(int, Tag[], int[], String[]) - Constructor for class nxopen.uf.UFAssem.DeformPartWarnings
-
- deformWarnings - Variable in class nxopen.uf.UFAssem.DeformPartData
-
- defStationNum() - Method in interface nxopen.tooling.ScrapDesignBuilder
-
Returns the defined station number, according to it scraps can be laid out automatically in strip
License requirements: None.
- defVector() - Method in interface nxopen.tooling.ProfileSplitBuilder
-
Returns the extruded vector to return
License requirements: None.
- DEG0 - Static variable in class nxopen.cam.GrooveToolBuilder.HolderStyles
-
0 degrees
- DEG45 - Static variable in class nxopen.cam.GrooveToolBuilder.HolderStyles
-
45 degrees
- DEG90 - Static variable in class nxopen.cam.GrooveToolBuilder.HolderStyles
-
90 degrees
- DEG_MIN_SEC - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.AngleFormat
-
Degrees/Minutes/Seconds
- DEGENERATE_GEOMETRY - Static variable in class nxopen.uf.UFConstants
-
- DEGENERATE_SPLINE - Static variable in class nxopen.uf.UFConstants
-
- DEGENERATE_SURFACE - Static variable in class nxopen.uf.UFConstants
-
- degofType - Variable in class nxopen.uf.UFSim.AskDegofData
-
- DEGRA - Static variable in class nxopen.uf.UFConstants
-
- DEGREE - Static variable in class nxopen.cae.xyplot.AngleUnit
-
Display angle in degree unit
- degree() - Method in interface nxopen.die.SpringbackCompensationBuilder
-
Returns the polynomial degree (one unit less than the order).
- degree() - Method in interface nxopen.facet.DivideFacetFaceBuilder
-
Returns the polynomial degree (one unit less than the order).
- degree() - Method in interface nxopen.features.FitCurveBuilder
-
Returns the degree
License requirements: None.
- degree() - Method in interface nxopen.features.RapidSurfaceBuilder
-
Returns the degree
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- degree() - Method in interface nxopen.features.StudioSplineBuilder
-
- degree() - Method in interface nxopen.features.StudioSplineBuilderEx
-
Returns the degree
License requirements: None.
- degree() - Method in interface nxopen.geometricutilities.CurveFitData
-
Returns the fitting degree
License requirements: None.
- degree() - Method in interface nxopen.geometricutilities.DegreesAndSegmentsOrPatchesBuilder
-
Returns the degree
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- degree() - Method in interface nxopen.geometricutilities.Rebuild
-
Returns the degree when rebuild type is none.
- degree() - Method in interface nxopen.SketchOffsetBuilder
-
Returns the degree for approximating offset spline
License requirements: None.
- degree - Variable in class nxopen.uf.UFCurve.AskSplineThruPtsData
-
- degree - Variable in class nxopen.uf.UFSo.SplineData
-
- DEGREE0 - Static variable in class nxopen.PlotBuilder.RotationOption
-
0 degree rotation
- DEGREE180 - Static variable in class nxopen.PlotBuilder.RotationOption
-
180 degree rotation
- DEGREE270 - Static variable in class nxopen.PlotBuilder.RotationOption
-
270 degree rotation
- DEGREE30AND80 - Static variable in class nxopen.features.vehicledesign.SeatBeltAnchorageBuilder.LOneLimitType
-
L1 limit angle area between 30 degree and 80 degree
- DEGREE45AND80 - Static variable in class nxopen.features.vehicledesign.SeatBeltAnchorageBuilder.LTwoLimitType
-
L2 limit angle area between 45 degree and 80 degree
- DEGREE50AND70 - Static variable in class nxopen.features.vehicledesign.SeatBeltAnchorageBuilder.LOneLimitType
-
L1 limit angle area between 50 degree and 70 degree
- DEGREE50AND70 - Static variable in class nxopen.features.vehicledesign.SeatBeltAnchorageBuilder.LTwoLimitType
-
L2 limit angle area between 50 degree and 70 degree
- DEGREE90 - Static variable in class nxopen.PlotBuilder.RotationOption
-
90 degree rotation
- DEGREE_AND_SEGMENTS - Static variable in class nxopen.features.FitCurveBuilder.FittingParametersOptions
-
Fit to degree and segments
- DEGREE_AND_SEGMENTS - Static variable in class nxopen.geometricutilities.CurveFitData.Method
-
Degree and Segments
- DEGREE_AND_TOLERANCE - Static variable in class nxopen.features.FitCurveBuilder.FittingParametersOptions
-
Fit to degree and tolerance
- DEGREE_AND_TOLERANCE - Static variable in class nxopen.geometricutilities.CurveFitData.Method
-
Degree and Tolerance
- DEGREE_CONVERSION - Static variable in class nxopen.cae.Result.Quantity
-
- DEGREE_PATCHES - Static variable in class nxopen.geometricutilities.RefitControlBuilder.RefitControlMethod
-
Degree and patches
- DEGREE_TOLERANCE - Static variable in class nxopen.geometricutilities.RefitControlBuilder.RefitControlMethod
-
Degree and tolerance
- DEGREE_UNITS - Static variable in class nxopen.uf.UFMotion.AngularUnitsType
-
- degreePatches() - Method in interface nxopen.features.MatchEdgeBuilder
-
Returns the degree and patches
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- DEGREES - Static variable in class nxopen.annotations.TableCellStyleBuilder.CellFormatTypes
-
Radians
- DEGREES - Static variable in class nxopen.annotations.TableCellStyleBuilder.FormatType
-
Deprecated.
Radians
- DEGREES - Static variable in class nxopen.cam.InspectionMethodBuilder.UVModeTypes
-
Angle from start and end
- degrees() - Method in interface nxopen.features.AestheticFaceBlendBuilder
-
Returns the degrees
License requirements: None.
- DEGREES_DEGREE_UNITS - Static variable in class nxopen.annotations.TableCellStyleBuilder.CellFormatTypes
-
Degrees
- DEGREES_DEGREE_UNITS - Static variable in class nxopen.annotations.TableCellStyleBuilder.FormatType
-
Deprecated.
Degrees
- DEGREES_MINUTES - Static variable in class nxopen.annotations.AngularDimensionFormat
-
Specifies degrees minutes format
- DEGREES_MINUTES - Static variable in class nxopen.preferences.AngleFormat
-
Degrees minutes format, e.g. 30 degrees 30"
- DEGREES_MINUTES - Static variable in class nxopen.uf.UFDrf.AngularUnits
-
- DEGREES_MINUTES_SECONDS - Static variable in class nxopen.annotations.AngularDimensionFormat
-
Specifies degrees minutes seconds format
- DEGREES_MINUTES_SECONDS - Static variable in class nxopen.cam.InspectionCmmCommandBuilder.AngularUnitsOptions
-
Use Degrees:Minutes:Seconds
- DEGREES_MINUTES_SECONDS - Static variable in class nxopen.preferences.AngleFormat
-
Degrees minutes seconds format, e.g. 30 degrees 30"30'
- DEGREES_MINUTES_SECONDS - Static variable in class nxopen.uf.UFDrf.AngularUnits
-
- DEGREES_OF_FREEDOM_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
-
The freedom degree of the component
- DEGREES_RADIAN_UNITS - Static variable in class nxopen.annotations.TableCellStyleBuilder.CellFormatTypes
-
Radians
- DEGREES_RADIAN_UNITS - Static variable in class nxopen.annotations.TableCellStyleBuilder.FormatType
-
Deprecated.
Radians
- degreesAndPatches() - Method in interface nxopen.geometricutilities.MovePoleBuilder
-
Returns the degrees and patches
License requirements: None.
- degreesAndSegmentsOrPatches() - Method in interface nxopen.features.StudioXformBuilder
-
- degreesAndSegmentsOrPatches() - Method in interface nxopen.features.StudioXformBuilderEx
-
Returns the degrees and segments or patches
License requirements: None.
- degreesAndSegmentsOrPatches() - Method in interface nxopen.geometricutilities.RefitControlBuilder
-
Returns the refit degrees and segments or patches
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- DegreesAndSegmentsOrPatchesBuilder - Interface in nxopen.geometricutilities
-
the DegreesAndSegmentsOrPatches builder .
- DegreesOfFreedom - Class in nxopen.assemblies
-
Structure used to report the Degrees of Freedom of a component.
- DegreesOfFreedom() - Constructor for class nxopen.assemblies.DegreesOfFreedom
-
- DegreesOfFreedom(DegreesOfFreedomResult, int, int, int, int, DegreesOfFreedomStatus, Point3d, DegreesOfFreedomStatus, Vector3d, DegreesOfFreedomStatus, Point3d, DegreesOfFreedomStatus, Vector3d, DegreesOfFreedomStatus, Vector3d, DegreesOfFreedomStatus, Vector3d) - Constructor for class nxopen.assemblies.DegreesOfFreedom
-
Constructor for the DegreesOfFreedom object.
- DegreesOfFreedomResult - Class in nxopen.assemblies
-
The overall result of the degrees of freedom calculation reported
in
DegreesOfFreedom
.
- DegreesOfFreedomStatus - Class in nxopen.assemblies
-
The status of a rotation point, rotation axis or translation direction reported
in
DegreesOfFreedom
.
- degreeType() - Method in interface nxopen.geometricutilities.Rebuild
-
Returns the degree type when rebuild type is none.
- DEGRESSION - Static variable in class nxopen.cam.StepoverBuilder.StepoverTypes
-
Degression
- DELAUNAY2D_ACCURATE - Static variable in class nxopen.fields.FieldEvaluator.InterpolationEnum
-
Triangulates the independent values and uses the bounding triangle, sacrifices speed for accuracy
- DELAUNAY2D_ACCURATE - Static variable in class nxopen.fields.FieldTable.InterpolationEnum
-
Deprecated.
Triangulates the independent values and uses the bounding triangle, sacrifices speed for accuracy
- DELAUNAY2D_FAST - Static variable in class nxopen.fields.FieldEvaluator.InterpolationEnum
-
Triangulates the independent values and uses the bounding triangle, sacrifices accuracy for speed
- DELAUNAY2D_FAST - Static variable in class nxopen.fields.FieldTable.InterpolationEnum
-
Deprecated.
Triangulates the independent values and uses the bounding triangle, sacrifices accuracy for speed
- DELAUNAY2D_MEDIUM - Static variable in class nxopen.fields.FieldEvaluator.InterpolationEnum
-
Triangulates the independent values and uses the bounding triangle, compromise between accuracy and speed
- DELAUNAY2D_MEDIUM - Static variable in class nxopen.fields.FieldTable.InterpolationEnum
-
Deprecated.
Triangulates the independent values and uses the bounding triangle, compromise between accuracy and speed
- DELAUNAY3D_ACCURATE - Static variable in class nxopen.fields.FieldEvaluator.InterpolationEnum
-
Creates Tetrahedrals using the independent values and uses the bounding tetrahedron, sacrifices speed for accuracy
- DELAUNAY3D_ACCURATE - Static variable in class nxopen.fields.FieldTable.InterpolationEnum
-
Deprecated.
Creates Tetrahedrals using the independent values and uses the bounding tetrahedron, sacrifices speed for accuracy
- DELAUNAY3D_FAST - Static variable in class nxopen.fields.FieldEvaluator.InterpolationEnum
-
Creates Tetrahedrals using the independent values and uses the bounding tetrahedron, sacrifices accuracy for speed
- DELAUNAY3D_FAST - Static variable in class nxopen.fields.FieldTable.InterpolationEnum
-
Deprecated.
Creates Tetrahedrals using the independent values and uses the bounding tetrahedron, sacrifices accuracy for speed
- DELAUNAY3D_MEDIUM - Static variable in class nxopen.fields.FieldEvaluator.InterpolationEnum
-
Creates Tetrahedrals using the independent values and uses the bounding tetrahedron, compromise between accuracy and speed
- DELAUNAY3D_MEDIUM - Static variable in class nxopen.fields.FieldTable.InterpolationEnum
-
Deprecated.
Creates Tetrahedrals using the independent values and uses the bounding tetrahedron, compromise between accuracy and speed
- delay - Variable in class nxopen.cae.Post.Animation
-
milliseconds
- DELAY - Static variable in class nxopen.cae.Post.AnimationControl
-
- delay - Variable in class nxopen.cae.Post.AnimationParameters
-
milliseconds
- delay() - Method in interface nxopen.display.SelPref
-
Returns the delay
License requirements: None.
- delay() - Method in interface nxopen.motion.AnimationControl
-
Returns the animation delay
License requirements: mechanisms ("MECHANISMS")
.
- delay() - Method in interface nxopen.motion.ArticulationControl
-
Returns the articulation delay
License requirements: mechanisms ("MECHANISMS")
.
- delay() - Method in interface nxopen.motion.SpreadsheetRunControl
-
Returns the spreadsheet run delay
License requirements: mechanisms ("MECHANISMS")
.
- delay(UFVariant, String, double) - Method in interface nxopen.uf.UFSim
-
- DELAYED - Static variable in class nxopen.positioning.Constraint.SolverStatus
-
The constraint is delayed and will not solve
- delayedUpdateStatus - Variable in class nxopen.assemblies.LoadInterpartDataBuilder.LoadInterpartDataStatusData
-
Delayed update status data status for the failed part
- delayEvaluation() - Method in interface nxopen.preferences.SessionSketch
-
Returns the setting that controls whether or not the sketch should be evaluated when a constraint is
added to the sketch.
- delayShipManufacturingFeatureUpdate() - Method in interface nxopen.features.ShipCollection
-
Returns the delay ship manufacturing feature update flag.
- DelayStatusInfo() - Constructor for class nxopen.PartDelayedUpdateStatus.DelayStatusInfo
-
- DelayStatusInfo(boolean, boolean, boolean, boolean, boolean, boolean, boolean) - Constructor for class nxopen.PartDelayedUpdateStatus.DelayStatusInfo
-
Constructor for the DelayStatusInfo object.
- delayTimeExpression() - Method in interface nxopen.motion.SignalChartListItem
-
Returns the threshold expression
License requirements: nx_motion_motor ("NX Motion Motor")
.
- delayUpdate() - Method in interface nxopen.features.vehicledesign.BaseDataSourceBuilder
-
Returns the method to set update delay option between assembly components.
- delayUpdateOnCreation() - Method in interface nxopen.drawings.CustomViewSettingsBuilder
-
Returns the delay update on creation
License requirements: None.
- delayUpdateOnCreation() - Method in interface nxopen.preferences.PartDrafting
-
Returns the flag indicating whether the newly created views should update immediately even
when the view update is delayed.
- delayViewUpdate() - Method in interface nxopen.drawings.CustomViewSettingsBuilder
-
Returns the delay view update
License requirements: None.
- delayViewUpdate() - Method in interface nxopen.preferences.PartDrafting
-
Returns the flag indicating whether to delay update of the drafting views during system
initiated drawing updates
License requirements: None.
- delete(boolean) - Method in interface nxopen.assemblies.Arrangement
-
- delete() - Method in interface nxopen.assemblies.ClearanceSet
-
Delete this clearance set
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- delete(boolean) - Method in interface nxopen.assemblies.ComponentPattern
-
Deletes the component pattern object.
- delete() - Method in interface nxopen.assemblies.Explosion
-
- delete() - Method in interface nxopen.assemblies.Order
-
Deletes an order
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- delete(NXObject) - Method in interface nxopen.AttributePropertiesBaseBuilder
-
Delete the attribute from the given object.
- DELETE - Static variable in class nxopen.AttributePropertiesBuilder.OperationType
-
Delete.
- delete(String, AttributePropertiesBaseBuilder.DataTypeOptions) - Method in interface nxopen.AttributeTemplatesBuilder
-
Delete an attribute template by specifying the title and type of the template.
- delete(UIBlock) - Method in interface nxopen.blockstyler.SetList
-
Deletes an item from the list
License requirements: None.
- delete(AtvSet) - Method in interface nxopen.cae.AtvSetCollection
-
Delete an ATV Set
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- DELETE - Static variable in class nxopen.cae.CompanionResultBuilder.CompanionResultDisposition
-
Companion Result Object will be deleted when primary results are deleted
- delete(CompanionResult) - Method in interface nxopen.cae.CompanionResultCollection
-
Delete a
CompanionResult
from the collection
License requirements: nx_masterfem ("Finite Element Modeling")
Created in NX7.5.0
- delete(FrfSet) - Method in interface nxopen.cae.FrfSetCollection
-
Delete an FRF Set
License requirements: nx_masterfem ("Finite Element Modeling")
.
- delete(Function) - Method in interface nxopen.cae.FunctionCollection
-
Delete a
Function
in the Scenario database of Motion Simulation and
Advanced Simulation.
- delete(LaminateDynamicEvent) - Method in interface nxopen.cae.LaminateDynamicEventCollection
-
Deletes the laminate dynamic event
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- delete(LaminateDynamicSim) - Method in interface nxopen.cae.LaminateDynamicSimCollection
-
Deletes the laminate dynamic sim
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- delete(ModeSet) - Method in interface nxopen.cae.ModeSetCollection
-
Delete an Mode Set
License requirements: nx_masterfem ("Finite Element Modeling")
.
- delete() - Method in interface nxopen.cae.PostAnnotation
-
Deletes the annotation.
- delete() - Method in interface nxopen.cae.PostAnnotationBuilder
-
Deletes the annotation builder.
- delete() - Method in interface nxopen.cae.PostSelectionEntity
-
Deletes the selection entity.
- delete() - Method in interface nxopen.cae.PostShowhideBuilder
-
Deletes the showhide builder.
- delete(SelectionRecipe[]) - Method in interface nxopen.cae.SelectionRecipeCollection
-
Delete a list of selection recipes
License requirements: nx_masterfem ("Finite Element Modeling")
.
- delete(SimCondition) - Method in interface nxopen.cae.SimConditionCollection
-
- delete(SimConditionParam) - Method in interface nxopen.cae.SimConditionParamCollection
-
- DELETE - Static variable in class nxopen.cae.SimConditionSeqMgr.ImportMissingConditionsBehavior
-
- delete(SimConditionTimeStep) - Method in interface nxopen.cae.SimConditionTimeStepCollection
-
Deletes a
SimConditionTimeStep
from time history
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
Created in NX9.0.0
- delete(SimLoadRecipe[]) - Method in interface nxopen.cae.SimLoadRecipeCollection
-
Delete a list of load recipes
License requirements: nx_masterfem ("Finite Element Modeling")
.
- delete(SimLoadRecipeMapEntry[]) - Method in interface nxopen.cae.SimLoadRecipeMapEntryCollection
-
Delete a list of map entries
License requirements: nx_masterfem ("Finite Element Modeling")
.
- delete(SimLoadRecipeSource[]) - Method in interface nxopen.cae.SimLoadRecipeSourceCollection
-
Delete a list of sources
License requirements: nx_masterfem ("Finite Element Modeling")
.
- delete() - Method in interface nxopen.cae.xyplot.MarkerModel
-
Deletes the marker model
License requirements: None.
- delete() - Method in interface nxopen.cae.xyplot.NoteModel
-
Deletes the note model
License requirements: None.
- delete(int) - Method in interface nxopen.cam.FormEdgesBuilder
-
Delete an existing form edges item
License requirements: cam_base ("CAM BASE")
.
- delete(NXObject) - Method in interface nxopen.cam.HolderSectionBuilder
-
Delete an existing holder section item
License requirements: cam_base ("CAM BASE")
.
- delete(int) - Method in interface nxopen.cam.HolderSectionBuilder
-
Delete an existing holder section item by index
License requirements: cam_base ("CAM BASE")
.
- delete(int) - Method in interface nxopen.cam.InspectionPathPointBuilder
-
Delete an existing path point
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- delete(int) - Method in interface nxopen.cam.MillingTrackpointBuilder
-
Delete an existing trackpoint
License requirements: cam_base ("CAM BASE")
.
- delete(int) - Method in interface nxopen.cam.MultipleStepoverBuilder
-
Delete a item
License requirements: cam_base ("CAM BASE")
.
- delete(NXObject) - Method in interface nxopen.cam.PreprocessGeometryBuilder
-
Delete one facet body
License requirements: None.
- delete(int) - Method in interface nxopen.cam.StepParamsBuilder
-
Delete an existing step params item
License requirements: cam_base ("CAM BASE")
.
- delete(NXObject) - Method in interface nxopen.cam.TrackingBuilder
-
Delete an existing trackpoint
License requirements: cam_base ("CAM BASE")
.
- delete(int) - Method in interface nxopen.cam.TurnAvoidancePathPointsBuilder
-
Delete an existing avoidance path point
License requirements: cam_base ("CAM BASE")
.
- delete(int) - Method in interface nxopen.cam.TurnRoughVariableIncrementBuilder
-
Delete a selected item
License requirements: cam_base ("CAM BASE")
.
- delete(int) - Method in interface nxopen.cam.TurnThreadFinishPassesBuilder
-
Delete an existing finish passes item
License requirements: cam_base ("CAM BASE")
.
- delete(int) - Method in interface nxopen.cam.UdtSectionBuilder
-
Delete an existing udt section item
License requirements: cam_base ("CAM BASE")
.
- delete() - Method in interface nxopen.dmu.ISnapshot
-
- DELETE - Static variable in class nxopen.drafting.AnnotateViewsBuilder.ExistingAutomaticAnnotation
-
- delete(SectionLineSegmentPointBuilder) - Method in interface nxopen.drawings.SectionLineSegmentPointListBuilder
-
- delete(int) - Method in interface nxopen.drawings.SectionLineSegmentPointListBuilder
-
- delete(Expression) - Method in interface nxopen.ExpressionCollection
-
Deletes an expression
License requirements: None.
- delete(ExpressionGroup[]) - Method in interface nxopen.ExpressionGroupCollection
-
Deletes an array of one or more expression groups.
- DELETE - Static variable in class nxopen.facet.BridgeFacetBodyBuilder.Input
-
Delete the input facet body after builder committing
- DELETE - Static variable in class nxopen.facet.CleanupFacetBodyBuilder.OriginalBodyOptions
-
Delete original body
- DELETE - Static variable in class nxopen.facet.ConvertFacetBodyBuilder.OriginalBodyOptions
-
Delete original body
- DELETE - Static variable in class nxopen.facet.FacetBodyFromBodyBuilder.OriginalBodyOptions
-
Delete original body
- DELETE - Static variable in class nxopen.facet.FeatureExtractionBuilder.InputActions
-
Delete the input facet bodies
- DELETE - Static variable in class nxopen.facet.MergeFacetBodyBuilder.Input
-
Delete the input facet body after builder committing
- DELETE - Static variable in class nxopen.facet.SewFacetBodyBuilder.Input
-
Delete the input facet body after builder committing
- DELETE - Static variable in class nxopen.features.EmbedManagerBuilder.TaskTypes
-
Delete the existing embedded file.
- delete(GeometricConstraintData) - Method in interface nxopen.features.GeometricConstraintDataManager
-
- delete(int) - Method in interface nxopen.features.GeometricConstraintDataManager
-
- delete(GeometricConstraintDataManager) - Method in interface nxopen.features.GeometricConstraintDataSetManager
-
- delete(int) - Method in interface nxopen.features.GeometricConstraintDataSetManager
-
- DELETE - Static variable in class nxopen.features.shipdesign.DrawingAnnotationBuilder.Annotation
-
- DELETE - Static variable in class nxopen.features.shipdesign.FeaturesBatchOperationBuilder.Types
-
- DELETE - Static variable in class nxopen.features.StudioSplineBuilder.CurveOption
-
Deprecated.
Delete input curve
- DELETE - Static variable in class nxopen.features.StudioSplineBuilderEx.InputCurveOptions
-
Delete original curve
- DELETE - Static variable in class nxopen.features.subdivision.ExtractCagePolylineBuilder.InputCurveOption
-
Delete input curves
- DELETE - Static variable in class nxopen.features.subdivision.MergeSubdivisionBodiesBuilder.InputBodyOptions
-
Delete the features
- DELETE - Static variable in class nxopen.features.subdivision.SplitSubdivisionBodyBuilder.InputBodyOptions
-
Delete the features
- DELETE - Static variable in class nxopen.features.TrimAndExtendBuilder.ArrowSideType
-
- DELETE - Static variable in class nxopen.features.TrimExtendBuilder.ArrowSideOptions
-
Delete
- delete() - Method in interface nxopen.fields.Field
-
Delete this field; destroys the field and removes all references to it.
- delete() - Method in interface nxopen.fields.FieldEvaluator
-
Delete this field evaluator; destroys the field evaluator and removes all references to it.
- delete(String[], String[], int) - Method in interface nxopen.gateway.BaseExplicitOrderBuilder
-
Deletes the saved order/orders that has/have been selected by the user from the list of saved orders
License requirements: None.
- delete(String) - Method in interface nxopen.gateway.BookmarkFile
-
Deletes an existing bookmark file.
- DELETE - Static variable in class nxopen.geometricutilities.CurveOptions.InputCurve
-
Deletes the original input curve and creates the new output curve
- delete(String) - Method in interface nxopen.layout2d.ComponentDefinition
-
Deletes definition
License requirements: nx_layout ("NX Layout")
.
- delete(Layout2dDefinitionLocation, String) - Method in interface nxopen.layout2d.ComponentDefinitionCollection
-
Deletes definition
License requirements: nx_layout ("NX Layout")
.
- DELETE - Static variable in class nxopen.mechatronics.ComparisonResult.Category
-
Delete category
- delete(PMNavFolderObject, boolean) - Method in interface nxopen.mechatronics.PMNavFolderObjectCollection
-
- delete() - Method in interface nxopen.ObjectGeneralPropertiesBuilder
-
Delete the name of each selected object.
- DELETE - Static variable in class nxopen.ObjectList.DeleteOption
-
Delete the object
- delete(NXObject) - Method in interface nxopen.pdm.EffectivityAttributePropertiesBuilder
-
Delete the attribute from the given object.
- delete() - Method in interface nxopen.PhysicalMaterial
-
Deletes a material from the part.
- delete() - Method in interface nxopen.report.Command
-
Deletes the command.
- delete() - Method in interface nxopen.sim.Breakpoint
-
Delete the breakpoint.
- delete(int, int, int, int) - Method in interface nxopen.Spreadsheet
-
Deletes (clears) one or more rows/columns of data from a worksheet.
- DELETE - Static variable in class nxopen.tooling.AddReusablePart.PocketBodyMethod
-
Delete pocket body
- DELETE - Static variable in class nxopen.tooling.BendInsertDesignBuilder.Types
-
delete
- DELETE - Static variable in class nxopen.tooling.BlendCurve3DBuilder.InputCurvesOption
-
Delete input curves
- DELETE - Static variable in class nxopen.tooling.CornerDesignBuilder.Types
-
Delete operation
- DELETE - Static variable in class nxopen.tooling.DieBaseBuilder.DesignToolOption
-
delete selected die base
- DELETE - Static variable in class nxopen.tooling.InsertAuxiliaryBuilder.CircOperationTypes
-
delete
- DELETE - Static variable in class nxopen.tooling.InsertAuxiliaryBuilder.DesignToolOption
-
delete
- DELETE - Static variable in class nxopen.tooling.InsertAuxiliaryBuilder.RectOperationOption
-
delete
- DELETE - Static variable in class nxopen.tooling.InsertEditToolsBuilder.Types
-
delete
- DELETE - Static variable in class nxopen.tooling.IntermediateStageBuilder.EditOptions
-
Delete current intermediate stage type
- DELETE - Static variable in class nxopen.tooling.PiercingInsertBuilder.Types
-
the delete insert type
- DELETE - Static variable in class nxopen.tooling.QuickQuotationBuilder.ManageTemporaryObjectsTypes
-
- DELETE - Static variable in class nxopen.tooling.ReliefDesignBuilder.Types
-
Delete operation
- DELETE - Static variable in class nxopen.tooling.ScrapDesignBuilder.EditScrapType
-
Deletes scraps
- DELETE - Static variable in class nxopen.tooling.SpecialPiercingInsertBuilder.Types
-
- DELETE - Static variable in class nxopen.Update.FailureOption
-
Delete failing object
- DELETE - Static variable in class nxopen.userdefinedobjects.UserDefinedEvent.Reason
-
An associated object was deleted - UDO cleanup event
- delete() - Method in interface nxopen.validate.Requirement
-
Deletes a user requirement and child
RequirementCheck
or removes a external requirement.
- delete() - Method in interface nxopen.Validation
-
Delete Validation Object
License requirements: None.
- delete() - Method in interface nxopen.weld.WeldJointBuilder
-
- delete3DSymbol(AttributeHolder) - Method in interface nxopen.pid.LibraryAuthoringBuilder
-
Deletes the 3D symbol which is new created
License requirements: nx_pid_design_author ("NX P and ID Design Author")
.
- delete3dWorkpieces(CAMObject[]) - Method in interface nxopen.cam.CAMSetup
-
Delete 3D workpieces of the selected operations
License requirements: cam_base ("CAM BASE")
.
- DELETE_ALL_INSTANCES - Static variable in class nxopen.tooling.ReliefDesignBuilder.MethodOfDelete
-
Delete all instances
- DELETE_BENDS - Static variable in class nxopen.tooling.DirectUnfoldBuilder.Types
-
the direct unfold type of delete all bends
- DELETE_DEPENDENTS - Static variable in class nxopen.Update.FailureOption
-
Delete failing object and its dependents
- DELETE_EACH - Static variable in class nxopen.SuppressByExpressionBuilder.ExpressionAction
-
Delete expression of one feature
- DELETE_FEATURE_LST_ERROR - Static variable in class nxopen.uf.UFConstants
-
- DELETE_IMPORTS - Static variable in class nxopen.ExpressionCollection.ImportMode
-
Delete all expressions in the imported file
- DELETE_INSERT - Static variable in class nxopen.tooling.GeneralInsertBuilder.Types
-
- DELETE_INSERT - Static variable in class nxopen.tooling.ShimBuilder.Types
-
- DELETE_INSERT - Static variable in class nxopen.tooling.SpecialFormingBuilder.Types
-
- DELETE_OBJECT - Static variable in class nxopen.ame.AMEManager.DeleteType
-
- DELETE_PAD - Static variable in class nxopen.tooling.BackingPadBuilder.Types
-
- DELETE_PART_FAMILY_PART - Static variable in class nxopen.tooling.SmartScrewUpdateBuilder.Types
-
- DELETE_PATH - Static variable in class nxopen.routing.CustomManager.CallbackReason
-
Called after the Delete Path command.
- DELETE_PATH - Static variable in class nxopen.routing.CustomManager.DesignRuleReason
-
Called after the Delete Path command.
- DELETE_PATH - Static variable in class nxopen.routing.DesignRuleViolationCollection.Reason
-
- DELETE_RAMP - Static variable in class nxopen.tooling.InsertAuxiliaryBuilder.RampStepsType
-
- DELETE_RETAINED_ANNOTATIONS - Static variable in class nxopen.uf.UFDrf.RetainedState
-
- DELETE_SELECTED_INSERTS - Static variable in class nxopen.tooling.PiercingInsertBuilder.AssociationToolType
-
The operation option is delete selected inserts
- DELETE_SELECTED_INSTANCE - Static variable in class nxopen.tooling.ReliefDesignBuilder.MethodOfDelete
-
Delete selected instance
- DELETE_SHARED - Static variable in class nxopen.SuppressByExpressionBuilder.ExpressionAction
-
Delete the common expression being shared by group of features
- DELETE_SYMBOLIC_REPRESENTATION - Static variable in class nxopen.ame.AMEManager.DeleteType
-
- DELETE_TEMPLATE - Static variable in class nxopen.ame.AMEManager.DeleteType
-
- deleteAfuFile(String) - Method in interface nxopen.cae.AfuManager
-
Delete an AFU file
License requirements: None.
- deleteAll() - Method in interface nxopen.geometricutilities.BoundaryDefinitionBuilder
-
Deletes all the points in the boundary definition
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- deleteAll(Tag, int) - Method in interface nxopen.uf.UFAttr
-
- deleteAll(Tag) - Method in interface nxopen.uf.UFClear
-
- deleteAllAnalysisData() - Method in interface nxopen.assemblies.ClearanceSetCollection
-
Deletes all clearance analysis data from the given part, including all
clearance analysis data sets, analysis results, and interference bodies.
- deleteAllAttributesByType(NXObject.AttributeType) - Method in interface nxopen.NXObject
-
- deleteAllAttributesByType(NXObject.AttributeType, Update.Option) - Method in interface nxopen.NXObject
-
- deleteAllBreakpoints() - Method in interface nxopen.sim.NcProgramManagerBuilder
-
Delete all breakpoints.
- deleteAllChannels() - Method in interface nxopen.sim.KinematicConfigurator
-
Deletes all channels from the kinematic model
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- deleteAllChildren() - Method in interface nxopen.routing.Division
-
Deletes all children divisions of the input division and the splitter curves
that were used to create the children divisions.
- deleteAllConstraints() - Method in interface nxopen.features.ShowRelatedFacesBuilder
-
Deletes all the persistent constraints on the related face
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- deleteAllData() - Method in interface nxopen.openxml.DocumentDataGroup
-
Deletes all document data
License requirements: None.
- deleteAllData() - Method in interface nxopen.report.ResultXmlFileWriter
-
Removes all document data
License requirements: None.
- deleteAllExistingRegions() - Method in interface nxopen.tooling.MWDefineRegionsBuilder
-
Delete all existing regions
License requirements: None.
- deleteAllFacetsFromModel(Tag) - Method in interface nxopen.uf.UFFacet
-
- deleteAllGeometries() - Method in interface nxopen.sim.KinematicComponentBuilder
-
Deletes all geometry elements from the component
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- deleteAllGuideLines() - Method in interface nxopen.tooling.MWDesignGuideLinesBuilder
-
Button for deleting all the guide lines.
- deleteAllHoldingSystems() - Method in interface nxopen.sim.KinematicConfigurator
-
Delete all holding systems from the kinematic model
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- deleteAllImages() - Method in interface nxopen.openxml.ImageGroupDocumentData
-
Deletes all images data
License requirements: None.
- deleteAllItemUdes(UFVariant, UFCambnd.UdeSetType) - Method in interface nxopen.uf.UFCambnd
-
- deleteAllItemUdes(UFVariant, UFCambnd.UdeSetType) - Method in interface nxopen.uf.UFCambndWedm
-
- deleteAllMarks() - Method in interface nxopen.uf.UFUndo
-
- deleteAllMiscCbs() - Method in interface nxopen.uf.UFUndo
-
- deleteAllOffsetRelationOnBody() - Method in interface nxopen.features.ShowRelatedFacesBuilder
-
Deletes all the offset relations on the body which the face belongs to
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE")
.
- deleteAllParameters() - Method in interface nxopen.mechatronics.TagTableBuilder
-
Delete all parameters.
- deleteAllPartInformationalFeatureAlerts() - Method in interface nxopen.features.FeatureCollection
-
Delete all informational alerts from all the features in a given part
License requirements: None.
- deleteAllPartingSurfaces() - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder
-
Method to delete all the parting surfaces before auto create parting surfaces if the user chooses to do so.
- deleteAllPoints(Spline) - Method in interface nxopen.geometricutilities.CurveShapingBuilder
-
Deletes all points on a curve.
- deleteAllRegions() - Method in interface nxopen.cam.CutRegionsBuilder
-
Delete all regions method
License requirements: None.
- deleteAllSegments() - Method in interface nxopen.features.sheetmetal.FlexibleCableBuilder
-
Deletes all cable segments.
- deleteAllSystemClasses() - Method in interface nxopen.sim.KinematicComponentBuilder
-
Delete all system classes of the component
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- deleteAllTemplates() - Method in interface nxopen.cae.Post
-
Delete all loaded template xml files
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- deleteAllUdes(Tag, UFUde.SetType) - Method in interface nxopen.uf.UFParam
-
- deleteAllUdesOfName(String) - Method in interface nxopen.cam.Path
-
Clean up by deleting all Udes that have the specified name **
License requirements: None.
- deleteAllUndoMarks() - Method in interface nxopen.Session
-
Deletes all undo marks
License requirements: None.
- deleteAllUnMarkedJoints() - Method in interface nxopen.weld.WeldJointBuilder
-
- deleteArrangement(boolean) - Method in interface nxopen.tooling.ChangeoverManagementBuilder
-
Delete the selected changeover.
- deleteArray(NXObject) - Method in interface nxopen.AttributePropertiesBaseBuilder
-
Delete the attribute array from the given object.
- deleteArray(Tag, boolean) - Method in interface nxopen.uf.UFAssem
-
- deleteArrayHole(int) - Method in interface nxopen.tooling.FastenerAssy
-
Deletes array hole data for the fastener assembly
License requirements: None.
- deleteArrayUnit(BaseUnit) - Method in interface nxopen.cae.ftk.DataManager
-
Deletes array unit
License requirements: None.
- deleteAttr(Tag, int, String) - Method in interface nxopen.uf.UFAttr
-
- deleteAttribute() - Method in interface nxopen.tooling.GeneralInsertBuilder
-
Remove attribute from Attribute of Object
License requirements: None.
- deleteAttribute() - Method in interface nxopen.tooling.ObjectAttributeManagementBuilder
-
The action to delete selected attributes
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- deleteAttributeByTypeAndTitle(NXObject.AttributeType, String) - Method in interface nxopen.NXObject
-
- deleteAttributeByTypeAndTitle(NXObject.AttributeType, String, Update.Option) - Method in interface nxopen.NXObject
-
- deleteAxis(KinematicAxis) - Method in interface nxopen.sim.KinematicConfigurator
-
Deletes the given axis
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- deleteAxissearch(DurabilityAxisSearch) - Method in interface nxopen.cae.DurabilityAxisSearchCollection
-
Delete a durability stress axes.
- deleteAxiSymmetricParameters(AxiSymmetricParameters) - Method in interface nxopen.cae.ResultManager
-
- deleteBendSequence(Tag, int) - Method in interface nxopen.uf.UFSmd
-
- deleteBlendCurves(Curve[]) - Method in interface nxopen.tooling.BlendCurve3DBuilder
-
Delete the preview blend curves.
- deleteBlock(DataProcessingBlock) - Method in interface nxopen.cae.DataProcessingBlockCollection
-
Delete a durability event.
- DeleteBody - Interface in nxopen.features
-
Represents a delete body feature.
- DeleteBodyBuilder - Interface in nxopen.features
-
Represents a
DeleteBody
builder for Delete Body feature.
- deleteBodyParms(Tag[]) - Method in interface nxopen.uf.UFModeling
-
- deleteBoundaries(Tag, UFCam.GeomType) - Method in interface nxopen.uf.UFCambnd
-
- deleteBoundary(Tag, UFCam.GeomType, UFVariant) - Method in interface nxopen.uf.UFCambnd
-
- deleteBreakpoint(NcProgram, int) - Method in interface nxopen.sim.NcProgramManagerBuilder
-
Remove a breakpoint from a program line.
- deleteBrokenEoLinkToLdObject(IEngObject) - Method in interface nxopen.ame.AMEManager
-
Delete a Broken EO - LD Mapping Link
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- deleteBrokenInterpartLinks() - Method in interface nxopen.PartCleanup
-
Returns the option that specifies whether or not to delete all inter-part links
where one or more components in that inter-part link have been removed.
- deleteBrokenTemplateLinkToLdObject(NXObject) - Method in interface nxopen.ame.AMEManager
-
Delete a Broken template - LD Mapping Link
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- deleteButtonClicked() - Method in interface nxopen.tooling.AssemblyDrawingBuilder
-
Returns the delete button clicked attribute
License requirements: None.
- deleteCaConfigProperties() - Method in interface nxopen.sim.KinematicComponent
-
Deletes ca config properties
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder") OR nx_sinumerik_ca ("Sinumerik Collision Avoidance")
.
- deleteCalculation(MarginCalculation) - Method in interface nxopen.cae.aerostructures.MarginCalculationCollection
-
Removes the calculation from the solution
License requirements: nx_masterfem ("Finite Element Modeling")
.
- deleteCallback(ListBox) - Method in interface nxopen.blockstyler.ListBox.DeleteCallback
-
Delete callback.
- deleteCallback(SetList, UIBlock) - Method in interface nxopen.blockstyler.SetList.DeleteCallback
-
Delete callback.
- deleteCam() - Method in interface nxopen.presslinesimulation.HydraulicLifterBuilder
-
To delete this motion.
- deleteCam() - Method in interface nxopen.presslinesimulation.LinearCamBuilder
-
To delete the cam.
- deleteCam() - Method in interface nxopen.presslinesimulation.RotaryCamBuilder
-
To delete the cam.
- deleteCam() - Method in interface nxopen.presslinesimulation.UserMotionBuilder
-
To delete the motion.
- deleteCamSetup() - Method in interface nxopen.Part
-
Delete CAM setup
License requirements: cam_base ("CAM BASE")
.
- deleteChainsAtStart() - Method in interface nxopen.sim.SinumerikCaExportBuilder
-
Returns the flag which determines if chains are deleted at the beginning of the export
License requirements: None.
- deleteChamferLabel() - Method in interface nxopen.features.LabelChamferBuilder
-
Returns the delete chamfer label flag.
- deleteChannel(String) - Method in interface nxopen.sim.KinematicConfigurator
-
Deletes a channel name from the list of channels
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- deleteChannelName(String) - Method in interface nxopen.sim.KinematicComponentBuilder
-
Deletes a channel name from the component
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- deleteCharacteristic(String, NXObject.AttributeType) - Method in interface nxopen.routing.CharacteristicList
-
Removes a characteristic from the characteristic list.
- deleteCharacteristicsInheritaceInformation() - Method in interface nxopen.weld.WeldJointBuilder
-
Delete welding characteristics inheritance information.
- deleteCharacterstics(CharacteristicList) - Method in interface nxopen.routing.ICharacteristic
-
Removes the input list of characteristics from this object.
- deleteChild(FlangeSteelRibChildBuilder) - Method in interface nxopen.die.FlangeSteelRibParentBuilder
-
Deletes a child Flange Steel Rib.
- deleteChild(HandlingCoreChildBuilder) - Method in interface nxopen.die.HandlingCoreParentBuilder
-
Deletes a child handling core.
- deleteChild(HoleChildBuilder) - Method in interface nxopen.die.HoleParentBuilder
-
Deletes a child hole.
- deleteChild(KeywayChildBuilder) - Method in interface nxopen.die.KeywayParentBuilder
-
Deletes a child keyway.
- deleteChild(PadChildBuilder) - Method in interface nxopen.die.PadParentBuilder
-
Deletes a child pad.
- deleteChild(PierceHoleChildBuilder) - Method in interface nxopen.die.PierceHoleParentBuilder
-
Deletes a child pierce hole
License requirements: ug_die_design ("Die Design")
.
- deleteChild(PointChildBuilder) - Method in interface nxopen.die.PointParentBuilder
-
Deletes a child point.
- deleteChild(PressureSystemChildBuilder) - Method in interface nxopen.die.PressureSystemParentBuilder
-
Deletes a child pressure system.
- deleteChild(RibChildBuilder) - Method in interface nxopen.die.RibParentBuilder
-
Deletes a child rib.
- deleteChild(SteelInsertSegmentChildBuilder) - Method in interface nxopen.die.SteelInsertSegmentParentBuilder
-
Deletes a child siseg
License requirements: ug_die_design ("Die Design")
.
- deleteChild(ThroatChildBuilder) - Method in interface nxopen.die.ThroatParentBuilder
-
Deletes a child throat section.
- deleteChild(WearPlateLocChildBuilder) - Method in interface nxopen.die.WearPlateLocParentBuilder
-
Deletes a child wear plate and locator
License requirements: ug_die_design ("Die Design")
.
- deleteChildCondition(Condition, Condition) - Method in interface nxopen.visualreporting.VisualReportBuilder
-
Deletes a
Condition
from its parent condition.
- deleteChildFeaturesOption() - Method in interface nxopen.preferences.SessionModeling
-
Returns the delete child features options
License requirements: None.
- deleteChildRule(String) - Method in interface nxopen.RuleManager
-
Delete a child rule from this rule manager.
- deleteClassRule(String, String) - Method in interface nxopen.uf.UFKf
-
- deleteClippingParameters(ClippingParameters) - Method in interface nxopen.cae.ResultManager
-
- deleteClueAlerts() - Method in interface nxopen.features.Feature
-
Delete all clue alerts from the features
License requirements: None.
- deleteColors() - Method in interface nxopen.PlotColorsWidthsBuilder
-
Delete drawing sheet colors
License requirements: None.
- deleteComparisonReport() - Method in interface nxopen.DrawingCompareManager
-
Deletes part comparison report.
- deleteCompAssertion(Tag) - Method in interface nxopen.uf.UFWeight
-
- deleteCompDrawing(NXObject, String, String, String, String) - Method in interface nxopen.tooling.CompDrawingBuilder
-
Deletes drawings in self-contained part or deletes a master model part with drawings
License requirements: None.
- deleteComponent(String) - Method in interface nxopen.pdm.PendingComponentsManager
-
Deletes a pending component.
- deleteComponent(KinematicComponent) - Method in interface nxopen.sim.KinematicComponent
-
Deletes a child component
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder") OR resource_manager_nx ("Teamcenter Resource Manager")
.
- deleteComponent(KinematicComponent) - Method in interface nxopen.sim.KinematicConfigurator
-
Deletes the given component
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- deleteComponents(Component[]) - Method in interface nxopen.layout2d.ComponentCollection
-
Deletes a list of 2D Components
License requirements: nx_layout ("NX Layout")
.
- deleteComponents(int) - Method in interface nxopen.tooling.AddReusablePart
-
Deletes an array instance of a component
License requirements: None.
- deleteCompSheet(NXObject, String, String, String, String) - Method in interface nxopen.tooling.CompDrawingBuilder
-
Deletes a sheet from a component.
- deleteConnection(int) - Method in interface nxopen.cae.DurSpecialistSuperpositionEventBuilder
-
Delete manual connection
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- deleteConnectionPoint(NXObject, NXObject) - Method in interface nxopen.ame.SymbolAuthoringBuilder
-
Deletes the connection point
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- deleteConnections(Connection[]) - Method in interface nxopen.ame.DiagramManager
-
Delete Connections
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- deleteConstraint(CfdAutoRefinementConstraint) - Method in interface nxopen.cae.CfdAutoRefinementConstraintCollection
-
Deletes an automatic refinement constraint
License requirements: nx_adv_fld_mod_solv ("NX Advanced Fluid Modeling - Full") OR sc_acou_meshing (" SC Acoustic Meshing")
.
- deleteConstraint(CfdContactPreventionConstraint) - Method in interface nxopen.cae.CfdContactPreventionConstraintCollection
-
Delete a contact prevention constraint.
- deleteConstraint(CfdLocalResolutionConstraint) - Method in interface nxopen.cae.CfdLocalResolutionConstraintCollection
-
Delete a local resolution constraint.
- deleteConstraint(Feature) - Method in interface nxopen.features.FaceRecognitionBuilder
-
Deletes the persistent constraint
License requirements: gateway ("UG GATEWAY")
.
- deleteConstraint(Feature) - Method in interface nxopen.features.ShowRelatedFacesBuilder
-
Deletes the persistent constraint
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- deleteConstraint(NXObject) - Method in interface nxopen.linedesigner.UINodeUtils
-
To delete constraint
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- DeleteConstraintBuilder - Interface in nxopen.features.subdivision
-
- deleteConstraintReference(ConstraintReference) - Method in interface nxopen.positioning.Constraint
-
- deleteConstraints(int, Tag[]) - Method in interface nxopen.uf.UFSket
-
- deleteConstraintsOnGeometries(NXObject[]) - Method in interface nxopen.Sketch
-
Deletes all geometric constraints associated with the object and all of its
vertices.
- deleteConstraintsOnGeometries(Sketch.ConstraintGeometry[]) - Method in interface nxopen.Sketch
-
Deletes all geometric constraints associated with the object and all of its vertices.
- deleteConstraintsOnGeometries(Sketch.ConstraintClass, Sketch.ConstraintGeometry[]) - Method in interface nxopen.Sketch
-
Deletes constraints associated with the input sketch geometry and vertices according to the constraint class, e.g.,
Sketch.ConstraintClass.ANY
will remove all geometric constraints and convert driving dimensions to reference dimensions.
- deleteContent() - Method in interface nxopen.diagramming.tables.CellBuilder
-
Delete cell contents.
- deleteConversionReport(int) - Method in interface nxopen.drawings.ConvertToPMIBuilderManager
-
API used to delete drawing to PMI conversion report
License requirements: None.
- deleteConvertedData(int) - Method in interface nxopen.drawings.ConvertToPMIBuilderManager
-
API used to delete drawing to PMI conversion data
License requirements: None.
- deleteCopiedComponents() - Method in interface nxopen.assemblies.CopyDesignElementBuilder
-
Removes the copied components created during the copy operation
License requirements: nx_4gd_integration ("4th Generation Design")
.
- deleteCriteriaObject(NXObject) - Method in interface nxopen.annotations.SearchModelViewBuilder
-
Delete search criteria object in search model view builder
License requirements: None.
- deleteCrossSectionParameters(CrossSectionParameters) - Method in interface nxopen.cae.ResultManager
-
- deleteCurrentAlignment() - Method in interface nxopen.drawings.ViewAlignmentBuilder
-
Deletes a view alignment that is stored as the current alignment in the builder
License requirements: drafting ("DRAFTING")
.
- deleteCurrentUDO() - Method in interface nxopen.tooling.ColorExpressionsBuilder
-
Delete current udo
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- deleteCurvature() - Method in interface nxopen.facet.CurvatureBuilder
-
Deletes the curvature data associated with the input facet bodies.
- DeleteCurve - Interface in nxopen.features
-
Represents a delete curve feature
To create or edit an instance of this class, use
DeleteCurveBuilder
Created in NX9.0.0
- deleteCurve(Curve) - Method in interface nxopen.features.IFormBuilder
-
Deletes a iso-parameter curve
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- deleteCurve() - Method in interface nxopen.features.RapidSurfaceBuilder
-
Deletes curve
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- deleteCurve() - Method in interface nxopen.weld.JointItemBuilder
-
Deletes the joint curve from the builder.
- DeleteCurveBuilder - Interface in nxopen.features
-
- deleteCurves() - Method in interface nxopen.features.RapidSurfaceBuilder
-
Returns the delete curves
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- deleteCushion(String) - Method in interface nxopen.tooling.DefineCamBuilder
-
Delete the cushion
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- deleteCustomPoints(Tag, UFCamgeom.CustomPointType) - Method in interface nxopen.uf.UFCamgeom
-
- deleteCutView(CutView) - Method in interface nxopen.CutViewCollection
-
Delete the Master Cut feature associated with a cut view.
- deleteCyclicSymmetricParameters(CyclicSymmetricParameters) - Method in interface nxopen.cae.ResultManager
-
- DELETED - Static variable in class nxopen.ame.LineDesignerMappingBuilder.FilterType
-
- DELETED - Static variable in class nxopen.cam.CAMFeature.State
-
Feature is not valid
- DELETED - Static variable in class nxopen.features.shipdesign.PenetrationUtils.RequestState
-
- DELETED - Static variable in class nxopen.weld.AutoPointBuilder.InterferenceDetails
-
Indicates weld points exist and parts were removed.
- DELETED - Static variable in class nxopen.weld.ConnectionFinderBuilder.FilterTypes
-
- DELETED_BY_OPEN - Static variable in class nxopen.assemblies.ComponentAssembly.OpenComponentStatus
-
The component was deleted on load as a result of the open
- deleteDangling() - Method in interface nxopen.cae.ElementDeleteBuilder
-
Returns the delete dangling node flag, whether the dangling nodes to be deleted
License requirements: None.
- deleteDataProcessing(DataProcessing) - Method in interface nxopen.cae.DataProcessingCollection
-
Deletes the DPM meta solution.
- deleteDataset(Tag) - Method in interface nxopen.uf.UFClear
-
- deleteDataSource(DataSource) - Method in interface nxopen.cae.DataSourceCollection
-
Deletes a
DataSource
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
Created in NX12.0.0
- deleteDbcMld(UFVariant) - Method in interface nxopen.uf.UFDbcMld
-
- deleteDefiningPointAtIndex(int) - Method in interface nxopen.routing.SplinePathBuilder
-
Deletes a defining point from the spline.
- deleteDeformationParameters(DeformationParameters) - Method in interface nxopen.cae.ResultManager
-
- deletedHolesDisplay() - Method in interface nxopen.annotations.HoleTableSettingsFormatBuilder
-
Returns the deleted holes display
License requirements: None.
- deleteDieData() - Method in interface nxopen.die.Tip
-
Deletes the copy of the product data.
- deleteDimensions(int, Tag[]) - Method in interface nxopen.uf.UFSket
-
- deleteDispResults(int) - Method in interface nxopen.uf.UFSf
-
- deletedPointsColor() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the color that will be used for the headform deleted points of the European NCAP (New Car Assessment Program) grid
License requirements: None.
- deleteDrawing(String, String, String, String) - Method in interface nxopen.tooling.CompDrawingBuilder
-
- deleteDrawing(Tag) - Method in interface nxopen.uf.UFDraw
-
- deleteDrawingSheetColors(Tag) - Method in interface nxopen.uf.UFPlot
-
- deleteDrawingSheetWidths(Tag) - Method in interface nxopen.uf.UFPlot
-
- deleteDrpos(UFVariant) - Method in interface nxopen.uf.UFDrpos
-
- deleteDuplicateElements() - Method in interface nxopen.cae.modelcheck.DuplicateElementsCheckBuilder
-
Deletes the duplicate elements and clear all cached duplicate elements in this builder.
- deleteDuplicateLights() - Method in interface nxopen.PartCleanup
-
Returns the option that specifies whether to delete duplicate light source objects
from the part file.
- deleteDursolNx(Tag) - Method in interface nxopen.uf.UFSf
-
- deleteDynamicLabels(boolean[]) - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder
-
Deletes dynamic labels whose corresponding positions are set to true in the array
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- deleteDynamicRule(String, String) - Method in interface nxopen.RuleManager
-
Delete an existing dynamic rule.
- DeleteEdge - Interface in nxopen.features
-
Represents a delete edge feature
To create or edit an instance of this class, use
DeleteEdgeBuilder
Created in NX8.0.0
- DeleteEdgeBuilder - Interface in nxopen.features
-
Represents a builder for a delete edge feature.
- deleteEmptyUserDefinedModelViews() - Method in interface nxopen.annotations.PmiPreferences
-
Returns the option to delete Empty User Defined Model Views in Part
License requirements: None.
- deleteEnd() - Method in interface nxopen.ame.AMEManager
-
End of the delete
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- deleteEvent(DurabilityEvent) - Method in interface nxopen.cae.DurabilityEventCollection
-
Delete a durability event.
- deleteEvent(RSEvent) - Method in interface nxopen.cae.responsesimulation.RSEventCollection
-
Deletes an event
License requirements: nx_response_anlys ("NX Response Analysis")
.
- deleteException(DisplayableObject, DisplayableObject) - Method in interface nxopen.assemblies.ClearanceAnalysisBuilder
-
Delete an exception.
- deleteExcitation(DurabilityExcitation) - Method in interface nxopen.cae.DurabilityExcitationCollection
-
Delete a durability excitation.
- deleteExcitation(Excitation) - Method in interface nxopen.cae.responsesimulation.ExcitationCollection
-
Deletes an excitation
License requirements: nx_response_anlys ("NX Response Analysis")
.
- deleteExistingAnnotations() - Method in interface nxopen.features.shipdesign.InteractiveAnnotationBuilder
-
Deletes the existing annotations excluding the opening filling lines.
- deleteExistingSheets() - Method in interface nxopen.tooling.MWDefineSheetsBuilder
-
For suppressing parting, or delete existing sheets
License requirements: None.
- deleteExitBuilder() - Method in interface nxopen.weld.EdgePrepValuesBuilder
-
- deleteExp(String) - Method in interface nxopen.uf.UFModlGeneral
-
- deleteExplosion(Tag) - Method in interface nxopen.uf.UFAssem
-
- deleteExpTag(Tag) - Method in interface nxopen.uf.UFModlGeneral
-
- deleteExtendSection() - Method in interface nxopen.die.AddendumSectionBuilder
-
Deletes the
Section
used for extended constraint curve.
- deleteExtractFace(Face) - Method in interface nxopen.geometricutilities.SnipIntoPatchesBuilder
-
Delete the extracted face
License requirements: None.
- DeleteFace - Interface in nxopen.features
-
Represents a delete face feature , don't use it until nx502
To create or edit an instance of this class, use
DeleteFaceBuilder
Created in NX5.0.2
- DeleteFaceBuilder - Interface in nxopen.features
-
Represents a builder for a delete face feature, don't use it until nx502.
- DeleteFaceBuilder.CapOptionValues - Class in nxopen.features
-
Represents the cap option values.
- DeleteFaceBuilder.FaceEdgeBlendPreferenceOptions - Class in nxopen.features
-
Represents the face edge blend preference options.
- DeleteFaceBuilder.SelectTypes - Class in nxopen.features
-
Enumeration of select type, don't use it until nx502 .
- DeleteFaceBuilder.SetbackOptions - Class in nxopen.features
-
Represents the set back options.
- deleteFacePair(NXObject[]) - Method in interface nxopen.features.MidSurfaceByFacePairsBuilder
-
Deletes the face pair
License requirements: solid_modeling ("SOLIDS MODELING")
.
- deleteFaceSet(int) - Method in interface nxopen.features.OffsetSurfaceBuilder
-
- deleteFamilyToolFalse() - Method in interface nxopen.tooling.PocketBuilder
-
Deletes the family tool false body
License requirements: None.
- deleteFatigue(DurabilityFatigue) - Method in interface nxopen.cae.DurabilityFatigueCollection
-
Delete a durability fatigue.
- deleteFeature(CAMFeature) - Method in interface nxopen.cam.FeatureRecognitionBuilder
-
Deletes a manufacturing feature that was created through this builder instance
License requirements: None.
- deleteFeature(Tag[]) - Method in interface nxopen.uf.UFModeling
-
- deleteFeatureName() - Method in interface nxopen.FeatureGeneralPropertiesBuilder
-
Delete the name of the feature.
- deleteFeaturesFromResult(TaggedObject[]) - Method in interface nxopen.weld.WeldAdvisorBuilder
-
Delete the features from the check result
License requirements: ugweld ("UG WELD")
.
- deleteField(Field) - Method in interface nxopen.fields.FieldManager
-
Deletes the specified
Field
object; if the object cannot be deleted
it is returned.
- deleteFile(String) - Method in interface nxopen.cae.ftk.DataManager
-
Deletes afu/op2 file
License requirements: None.
- deleteFile(String, String) - Method in interface nxopen.pdm.CAEFileContainer
-
Delete a file from the list of files in the file container class
CAEFileContainer
.
- deleteFile(String) - Method in interface nxopen.RemoteUtilities
-
Deletes a file.
- deleteFill() - Method in interface nxopen.tooling.MoldFillingBuilder
-
Deletes selected fill component.
- deleteFillStrip(WeldFillStripBuilder) - Method in interface nxopen.weld.WeldFillBuilder
-
Delete a fill strip.
- deleteFlangeBendProperties() - Method in interface nxopen.features.sheetmetal.FlangeBendPropertiesBuilder
-
Create a flange properties.
- deleteFlatPattern(Tag) - Method in interface nxopen.uf.UFSmd
-
- deleteFolder(NoteFolder) - Method in interface nxopen.cae.NoteManager
-
Delete specified folder
License requirements: nx_masterfem ("Finite Element Modeling")
.
- DeleteFontsBuilder - Interface in nxopen.routing
-
- deleteFreeBodyResultsBuilder(FreeBodyResultsBuilder) - Method in interface nxopen.cae.ResultManager
-
- deleteFromClassSel(int) - Method in interface nxopen.uf.UFUi
-
- deleteFromCollaborativeDesign(NXObject[]) - Method in interface nxopen.assemblies.Subset
-
- deleteFunction(FunctionObject) - Method in interface nxopen.mechatronics.FunctionObjectCollection
-
Dlete a
FunctionObject
object
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
Created in NX7.5.0
- deleteFunction(Tag) - Method in interface nxopen.uf.UFMotion
-
- DeleteGapsBuilder - Interface in nxopen.routing
-
- deleteGeneralName() - Method in interface nxopen.FeatureGeneralPropertiesBuilder
-
Delete the name of the general object.
- deleteGenericLifter(String) - Method in interface nxopen.tooling.DefineLifterBuilder
-
Delete the generic lifter
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- deleteGeometry(NXObject) - Method in interface nxopen.sim.KinematicComponentBuilder
-
Deletes a single geometry element from the component
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- deleteGeometry(Tag, UFCam.GeomType) - Method in interface nxopen.uf.UFCamgeom
-
- deleteGeometry(Tag) - Method in interface nxopen.uf.UFCamtext
-
- deleteGlobalLayup(LaminateGlobalLayup) - Method in interface nxopen.cae.LaminateGlobalLayupCollection
-
Delete an existing
LaminateGlobalLayup
instance
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
Created in NX7.5.0
- deletegraphs(PostGraph[]) - Method in interface nxopen.cae.Post
-
Deletes
PostGraph
objects
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
Created in NX9.0.0
- deleteGroup(SimBcGroup) - Method in interface nxopen.cae.SimGroupContainer
-
Deletes a BC group from this group container
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- deleteGroupLabel(Rule, GroupLabel) - Method in interface nxopen.visualreporting.VisualReportBuilder
-
- deleteGuideLine(Curve) - Method in interface nxopen.tooling.MWDesignGuideLinesBuilder
-
Delete a given guide line.
- deleteHintAlerts() - Method in interface nxopen.features.Feature
-
Delete all clue alerts from the features
License requirements: None.
- deleteHolderSection(Tag, int) - Method in interface nxopen.uf.UFCutter
-
- deleteHoldingSystem(String) - Method in interface nxopen.sim.KinematicComponentBuilder
-
Deletes a holding system from the component
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- deleteHoldingSystem(String) - Method in interface nxopen.sim.KinematicConfigurator
-
Delete a holding system from the list
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- deleteHoles() - Method in interface nxopen.features.ExtractFaceBuilder
-
Returns the option to specify if holes should be deleted from the extracted faces
License requirements: None.
- deleteImages() - Method in interface nxopen.report.ImagesGroupItem
-
Deletes all images in class.
- deleteImportedSketch() - Method in interface nxopen.features.shipdesign.SteelFeatureSpreadsheetBuilder
-
This method deletes the imported sketch which is unwanted any longer.
- deleteInformationalAlerts() - Method in interface nxopen.features.Feature
-
Delete all informational alerts from the features
License requirements: None.
- deleteInformationalAlerts(NXObject[]) - Method in interface nxopen.features.FeatureCollection
-
Delete all informational alerts from the features and if numFrecs is 0 then delete informational alerts from all features in the part
License requirements: None.
- deleteInspectionSetup() - Method in interface nxopen.Part
-
Delete CMM Inspection setup
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- deleteInstance(Tag) - Method in interface nxopen.uf.UFFam
-
- deleteInstanceDefinition(InstanceDefinition) - Method in interface nxopen.partfamily.TemplateManager
-
Delete the family member definition from template manager
License requirements: solid_modeling ("SOLIDS MODELING")
.
- deleteInstanceRule(String, String) - Method in interface nxopen.uf.UFKf
-
- deleteInstanceUserAttribute(NXObject.AttributeType, String, boolean, Update.Option) - Method in interface nxopen.assemblies.Component
-
Deletes the first attribute encountered with the given Type, Title and Index.
- deleteInstanceUserAttributes(NXObject.AttributeType, Update.Option) - Method in interface nxopen.assemblies.Component
-
Deletes the attributes encountered with the given Type with option to update or not.
- deleteInterf(Tag, Tag, Tag) - Method in interface nxopen.uf.UFClear
-
- deleteInterference(DisplayableObject, DisplayableObject) - Method in interface nxopen.assemblies.ClearanceSet
-
Deletes the interference for a given object pair.
- deleteInterference(Tag) - Method in interface nxopen.uf.UFMotion
-
- deleteInternalPatch(Face, Curve[]) - Method in interface nxopen.geometricutilities.SnipIntoPatchesBuilder
-
Delete internal patch from the selected surface
License requirements: None.
- deleteInvalidAttributes() - Method in interface nxopen.PartCleanup
-
Returns the option that specifies whether to delete all invalid user attributes
from the part file.
- deleteIsoCurve(Curve[]) - Method in interface nxopen.geometricutilities.SnipIntoPatchesBuilder
-
Delete the isoparametric curve generated on the selected surface
License requirements: None.
- deleteItem() - Method in interface nxopen.tooling.FaceAttributeBuilder
-
Delete an attribute item.
- deleteItem(Tag, UFCam.GeomType, UFVariant) - Method in interface nxopen.uf.UFCamgeom
-
- deleteItemUde(UFVariant, UFCambnd.UdeSetType, UFVariant) - Method in interface nxopen.uf.UFCambnd
-
- deleteItemUde(UFVariant, int, UFCambnd.UdeSetType, UFVariant) - Method in interface nxopen.uf.UFCambndWedm
-
- deleteJunction(KinematicJunction) - Method in interface nxopen.sim.KinematicConfigurator
-
Deletes the given junction
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- deleteJunction(UFVariant, String) - Method in interface nxopen.uf.UFSim
-
- deleteKinematicModel(KinematicModel) - Method in interface nxopen.sim.KinematicConfigurator
-
Delete the copy of kinematic model.
- deleteLabel(AMEEngineeringObjectLabel) - Method in interface nxopen.ame.AMEManager
-
Deletes an Engineering Object Label
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- deleteLabel() - Method in interface nxopen.features.LabelNotchBlendBuilder
-
Returns the delete label
License requirements: None.
- deleteLast() - Method in interface nxopen.geometricutilities.InteractiveSectionBuilder
-
Deletes last point or the plane created
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- deleteLastKeyPoint() - Method in interface nxopen.geometricutilities.BoundaryDefinitionBuilder
-
Deletes last key point and all the points from last key point up to and excluding its previous key point
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- deleteLastPathCurves() - Method in interface nxopen.features.shipdesign.ProfileSystemBuilder
-
- deleteLayoutState(LayoutState) - Method in interface nxopen.cae.LayoutStateCollection
-
Deletes the specified
LayoutState
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
Created in NX11.0.0
- deleteLegacyConstraint(int, Tag[], int[], int) - Method in interface nxopen.uf.UFSket
-
- deleteLevel(Tag, int) - Method in interface nxopen.uf.UFCutLevels
-
- deleteLibraryFolder(ProfileLibrary) - Method in interface nxopen.mfg.am.ProfileLibrary
-
Remove a Library component from the Profile Library
License requirements: None.
- deleteLifterOnLifter(String) - Method in interface nxopen.tooling.DefineLifterBuilder
-
Delete the lifter on lifter
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- deleteLinearCam(String) - Method in interface nxopen.tooling.DefineCamBuilder
-
Delete the linear cam
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- deleteLineBreak(HoleCalloutSettingsBuilder.Featuretype, int) - Method in interface nxopen.annotations.HoleCalloutSettingsBuilder
-
If the nth hole feature parameter of feature type is a line break and it can be deleted, deletes it.
- deleteLines(DraftingCurve[]) - Method in interface nxopen.features.shipdesign.InteractiveAnnotationBuilder
-
Deletes opening filling lines
License requirements: nx_ship_drafting ("Ship Drafting") OR nx_ship_gen_arrange ("Ship General Arrangement")
.
- deleteLinkedFace() - Method in interface nxopen.tooling.ReliefDesignBuilder
-
Delete the linked face feature.
- deleteLoadcase(LoadCase) - Method in interface nxopen.cae.aerostructures.LoadCaseCollection
-
Delete a AeroStruct loadcase.
- deleteLoadCaseSet(LoadCaseSet) - Method in interface nxopen.cae.aerostructures.LoadCaseSetCollection
-
Delete a AeroStruct loadcase set.
- deleteLocationObjects() - Method in interface nxopen.routing.DesignRuleViolationLocation
-
Returns the function returns delete location objects,
which is an option for deletion of violation location objects.
- deleteLvNx(Tag, Tag) - Method in interface nxopen.uf.UFSf
-
- deleteMachiningFeatures(int, UFVariant[]) - Method in interface nxopen.uf.UFMfm
-
- deleteMargin(OrdinateOriginDimension) - Method in interface nxopen.annotations.OrdinateMargin
-
Deletes a defined ordinate margin object from the ordinate set.
- deleteMarginSolution(MarginSolution) - Method in interface nxopen.cae.aerostructures.MarginSolutionCollection
-
Delete a AeroStruct metasolution.
- deleteMark(int, String) - Method in interface nxopen.uf.UFUndo
-
- deleteMasterPath() - Method in interface nxopen.cam.Operation
-
Delete Master Tool Path
License requirements: cam_base ("CAM BASE")
.
- deleteMaterial(Tag) - Method in interface nxopen.uf.UFDisp
-
- deleteMaterials() - Method in interface nxopen.PartCleanup
-
Returns the option that specifies whether to delete all materials
from the part file.
- deleteMaterialsFromLibrary(String[], String) - Method in interface nxopen.PhysicalMaterialCollection
-
Deletes the materials from a material library file.
- deleteMatingConditions() - Method in interface nxopen.assemblies.ComponentAssembly
-
Delete all the mating conditions in this assembly.
- deleteMeaPoints() - Method in interface nxopen.cam.InspectionDeleteMeaPtsBuilder
-
Deletes specified analysis points.
- deleteMeasurement(Tag) - Method in interface nxopen.uf.UFMotion
-
- deleteMeasurementPoints() - Method in interface nxopen.cam.InspectionCollisionAvoidanceBuilder
-
Returns a flag to indicate whether to delete measurement points to avoid collisions
License requirements: None.
- deleteMeasures(ResultMeasure[]) - Method in interface nxopen.cae.ResultMeasureCollection
-
Delete list of result measures
License requirements: nx_masterfem ("Finite Element Modeling")
.
- deleteMember(int) - Method in interface nxopen.PartFamilyManager
-
- deleteMember(Tag, int) - Method in interface nxopen.uf.UFFam
-
- deleteMetasolution(DurabilityMetaSolution) - Method in interface nxopen.cae.DurabilityMetaSolutionCollection
-
Delete a durability metasolution.
- deleteMethod() - Method in interface nxopen.tooling.ReliefDesignBuilder
-
Returns the delete method.
- deleteModel() - Method in interface nxopen.sim.KinematicConfigurator
-
Deletes the entire kinematic model
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- deleteModelEdits() - Method in interface nxopen.cae.AssyFEModel
-
Delete any Model Edits that exist on this Assembly FEM.
- deleteMultiBendBendProperties() - Method in interface nxopen.features.sheetmetal.MultiBendBendPropertiesBuilder
-
Deletes a multi bend properties.
- deleteName(Tag) - Method in interface nxopen.uf.UFObj
-
- deleteNode(Node) - Method in interface nxopen.blockstyler.Tree
-
Deletes the node from tree.
- deleteNode(Point) - Method in interface nxopen.features.RapidSurfaceBuilder
-
Deletes node
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- deleteNode(NXObject) - Method in interface nxopen.weld.ConnectionFinderBuilder
-
Deletes the connected part information from the results.
- deleteNonDeletables(Tag) - Method in interface nxopen.uf.UFSo
-
- deleteNonPersistentConstraints() - Method in interface nxopen.positioning.Positioner
-
Deletes all the non-persistent
Constraint
s of the positioner.
- deleteNthContent(int) - Method in interface nxopen.openxml.TableCellData
-
Removes the nth content data
License requirements: None.
- deleteNthData(int) - Method in interface nxopen.openxml.DocumentDataGroup
-
Deletes the nth document data
License requirements: None.
- deleteNthData(int) - Method in interface nxopen.report.ResultXmlFileWriter
-
Removes the nth document data
License requirements: None.
- deleteNthImage(int) - Method in interface nxopen.openxml.ImageGroupDocumentData
-
Deletes the nth image data
License requirements: None.
- deleteNthReachZone(int) - Method in interface nxopen.features.Human
-
Delete a
HumanReachZone
from human feature
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
Created in NX4.0.0
- deleteObject(NXObject) - Method in interface nxopen.ame.AMEManager
-
Delete the AME object
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- deleteObject(Tag) - Method in interface nxopen.uf.UFObj
-
- deleteObjectClearanceZone(DisplayableObject) - Method in interface nxopen.assemblies.ClearanceAnalysisBuilder
-
Delete an existing Clearance Zone from around an object.
- deleteObjectParms(Tag[]) - Method in interface nxopen.uf.UFModeling
-
- deleteObjects(TaggedObject[]) - Method in interface nxopen.markup.MarkupFileObjectCollection
-
- deleteObjects(NXObject[]) - Method in interface nxopen.Sketch
-
Deletes objects from the sketch
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- DeleteObjectsBuilder - Interface in nxopen.routing
-
- deleteOffsetRelation(NXObject[]) - Method in interface nxopen.features.FaceRecognitionBuilder
-
Deletes the offset relation
License requirements: gateway ("UG GATEWAY")
.
- deleteOffsetRelation(NXObject[]) - Method in interface nxopen.features.ShowRelatedFacesBuilder
-
Deletes the offset relation
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- deleteOldComponentsToggle() - Method in interface nxopen.tooling.RenameAndExportComponentBuilder
-
Returns the delete old components toggle
License requirements: None.
- deleteOneEvent(int) - Method in interface nxopen.cam.Path
-
Delete one event
License requirements: None.
- deleteOneEvent(PathEvent) - Method in interface nxopen.cam.Path
-
Delete one event
License requirements: None.
- deleteOneLoopList(int) - Method in interface nxopen.tooling.EdgePatchBuilder
-
Delete one loop list of the index.
- deleteOpeningFillingLine(Line) - Method in interface nxopen.features.shipdesign.InteractiveAnnotationBuilder
-
Deletes the specific opening filling line.
- deleteOpenings - Variable in class nxopen.uf.UFModl.LinkedExt
-
- deleteOpenings - Variable in class nxopen.uf.UFWave.AskLinkRegionSourcesData
-
- deleteOrder(Sketch, String) - Method in interface nxopen.drawings.OrderManager
-
Delete the order matching the specified name
License requirements: nx_layout ("NX Layout")
.
- deleteOriginalFeature() - Method in interface nxopen.features.ReplaceFeatureBuilder
-
Returns the indication on whether to delete the original feature or not.
- deleteOrphan() - Method in interface nxopen.cae.ElementConnectivityBuilder
-
Returns the delete orphan node flag, telling whether orphan nodes will be deleted
License requirements: None.
- deleteOrphanedUserMaterialModels() - Method in interface nxopen.PhysicalMaterial
-
Deletes Orphaned User Material (UMAT) Models and Properties from a material.
- deleteOverlayData() - Method in interface nxopen.DrawingCompareManager
-
Deletes Overlay data of a part.
- deleteOverride() - Method in interface nxopen.validate.ResultObject
-
Deletes user override request
Override
.
- DeleteOverridePartBuilder - Interface in nxopen.assemblies
-
Represents a builder class that deletes override part in the specified design elements.
- deleteOverridePartBuilder(Part) - Method in interface nxopen.CollaborativeContentManager
-
- deleteOverstock() - Method in interface nxopen.preferences.RoutingStock
-
Returns the delete overstock flag during deletion of last stock covered by
the overstock
License requirements: routing_base ("Routing Basic")
.
- deletePairClearanceZone(DisplayableObject, DisplayableObject) - Method in interface nxopen.assemblies.ClearanceAnalysisBuilder
-
Delete an existing Clearance Zone between the given pair of objects.
- deleteParameter(OperatorRuleBuilder.ParameterType, int) - Method in interface nxopen.ame.OperatorRuleBuilder
-
Deletes parameter
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- deleteParameter(NXObject) - Method in interface nxopen.ame.PlcMethodBuilder
-
Delete Parameter
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- deleteParameter(String) - Method in interface nxopen.mechatronics.ParameterStockBuilder
-
Delete parameter.
- deleteParameter(String) - Method in interface nxopen.mechatronics.TagTableBuilder
-
Delete parameter.
- deleteParamSet - Variable in class nxopen.uf.UFCam.Preferences
-
- deleteParms(Tag) - Method in interface nxopen.uf.UFSo
-
- deleteParser(Parser) - Method in interface nxopen.validate.ValidationManager
-
Deletes a parser.
- deletePartAssertion(Tag) - Method in interface nxopen.uf.UFWeight
-
- deletePartFamily() - Method in interface nxopen.partfamily.TemplateManager
-
Deletes a part family associated with the manager/owning part
License requirements: solid_modeling ("SOLIDS MODELING")
.
- deletePartFamilyAttribute(FamilyAttribute) - Method in interface nxopen.partfamily.TemplateManager
-
Deletes a given part family attribute
License requirements: solid_modeling ("SOLIDS MODELING")
.
- deletePartFamilyInstanceSelectionCriteria() - Method in interface nxopen.assemblies.Component
-
Deletes
InstanceSelectionCriteria
associated with this component
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX9.0.0
- deletePartialBlend() - Method in interface nxopen.features.DeleteFaceBuilder
-
Returns the flag indicating whether to delete the partial blend or not.
- deletePartingSurface(Body) - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder
-
Delete a newly created parting surface.
- deletePath(NXObject[]) - Method in interface nxopen.routing.RouteManager
-
Deletes the given Routing Control Points (RCP), segments, curves, and components.
- deletePathArrangement() - Method in interface nxopen.routing.electrical.PathArrangementBuilder
-
Deletes path arrangement through builder
License requirements: routing_base ("Routing Basic")
.
- deletePathCurves() - Method in interface nxopen.features.shipdesign.ProfileSystemBuilder
-
- deletePiercingInsert() - Method in interface nxopen.tooling.PiercingInsertMiniToolsBuilder
-
Delete piercing inserts which are selected.
- deletePipeStock(AttributeHolder) - Method in interface nxopen.diagramminglibraryauthor.PipeStockBuilder
-
Deletes the pipe stock which is new created
License requirements: None.
- deletePipNode(Tag) - Method in interface nxopen.uf.UFSmd
-
- deletePlacedSheetElements(FragmentObject) - Method in interface nxopen.ame.DiagramManager
-
Delete placed sheet elements from page
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- deletePlcMethod() - Method in interface nxopen.ame.PlcMethodBuilder
-
To Delete Method
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- deletePly(int) - Method in interface nxopen.cae.LaminatePlyCollection
-
Deletes an existing
LaminatePly
License requirements: nx_lam_composites ("Laminate Composites")
Created in NX5.0.0
- deletePlyGroup(int) - Method in interface nxopen.cae.LaminateGlobalLayupPlyGroupCollection
-
Deletes a
LaminatePlyGroup
by index
License requirements: nx_lam_composites ("Laminate Composites")
Created in NX6.0.0
- deletePlyGroup(int) - Method in interface nxopen.cae.LaminatePlyGroupCollection
-
Deletes a
LaminatePlyGroup
by index
License requirements: nx_lam_composites ("Laminate Composites")
Created in NX5.0.0
- deletePocket(NXObject) - Method in interface nxopen.tooling.ReusablePocketBuilder
-
Deletes pocket.
- deletePoint(Point) - Method in interface nxopen.PointCollection
-
Deletes a
Point
by adding the point to the delete list and then
updating the delete list without performing a general update.
- deletePoint(Point) - Method in interface nxopen.tooling.ReusePositioningObjectBuilder
-
Delete point from sketch
License requirements: None.
- deletePolesGroup(int) - Method in interface nxopen.geometricutilities.ControlPoleManagerData
-
Deletes a group of poles
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- DeletePolygonFaceBuilder - Interface in nxopen.cae
-
- deletePort(AttributeHolder) - Method in interface nxopen.diagramminglibraryauthor.PortDataBuilder
-
Deletes the port which is new created
License requirements: None.
- deletePortLock(Tag) - Method in interface nxopen.uf.UFRoute
-
- deletePosition(NXObject) - Method in interface nxopen.ame.PlcMethodBuilder
-
Delete a position
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- deletePositioningTask(PositioningTask) - Method in interface nxopen.assemblies.Subset
-
- deletePostJtBuilder(PostJtExportBuilder) - Method in interface nxopen.cae.ResultManager
-
- deletePostReport(LaminatePostReport) - Method in interface nxopen.cae.LaminatePostReportCollection
-
Deletes the laminate post report
License requirements: nx_lam_composites ("Laminate Composites")
.
- deletePretest(PreTestSolution) - Method in interface nxopen.cae.PreTestSolutionCollection
-
Delete a pre-test
License requirements: nx_correl_base ("FE Correlation")
.
- deletePreviewBody(boolean) - Method in interface nxopen.features.shipdesign.PlateSystemBuilder
-
Deletes the preview body.
- deletePreviousDiagrams() - Method in interface nxopen.features.TabNoteCfgBuilder
-
Returns the delete previous diagrams
License requirements: None.
- deleteProfile(Profile) - Method in interface nxopen.mfg.am.ProfileLibrary
-
Remove a Profile component from the Profile Library
License requirements: None.
- deleteProgress() - Method in interface nxopen.shipdesign.Generator
-
Deletes the progress bar.
- deleteProperty(Property) - Method in interface nxopen.visualreporting.VisualReportBuilder
-
- deletePunchOrDieComponent() - Method in interface nxopen.tooling.BurringInsertBuilder
-
The action to delete the selected punch or die component
License requirements: None.
- deletePunchOrDieComponent() - Method in interface nxopen.tooling.FormingInsertBuilder
-
The action to delete the selected punch or die component
License requirements: None.
- deleteQueryCurve(QueryCurvePost) - Method in interface nxopen.cae.ResultManager
-
Delete a QueryCurvePost
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- deleteRandomFatigue(DurabilityRandomFatigue) - Method in interface nxopen.cae.DurabilityRandomFatigueCollection
-
Delete a durability fatigue.
- deleteRange(int) - Method in interface nxopen.cam.CutLevel
-
Delete a range
License requirements: cam_base ("CAM BASE")
.
- deleteRecipe(FluidDomainRecipe) - Method in interface nxopen.cae.FluidDomainCollection
-
Deletes a fluid domain recipe
License requirements: nx_adv_fluid_mod ("NX Advanced Fluid Modeling - Basic") OR sc_acou_meshing (" SC Acoustic Meshing")
.
- deleteRecord(BaseRecord) - Method in interface nxopen.cae.ftk.DataManager
-
Deletes record
License requirements: None.
- deleteRecord(int) - Method in interface nxopen.cae.xyplot.Plot
-
Deletes the nth record.
- deleteRecords(String, int[]) - Method in interface nxopen.cae.AfuManager
-
Delete multiple AFU Data Records from an AFU file
License requirements: None.
- deleteReferenceData() - Method in interface nxopen.weld.JointmarkBuilder
-
Delete temporary overlap or top sheet feature.
- deleteReferenceSet(ReferenceSet) - Method in interface nxopen.BasePart
-
- deleteRegion(OrientationRegionItemBuilder) - Method in interface nxopen.features.shipdesign.OrientationDefinitionBuilder
-
Deletes a previously created region.
- deleteRegion(String) - Method in interface nxopen.tooling.MWDefineRegionsBuilder
-
Delete a region
License requirements: None.
- deleteRegionBody() - Method in interface nxopen.features.shipdesign.PlateSystemBuilder
-
Delete the current region body.
- deleteRegions() - Method in interface nxopen.features.shipdesign.PlateBuilder
-
Deletes regions
License requirements: nx_ship_detail ("Ship Detail Design")
.
- deleteReplaceAnnotation(Annotation, Annotation) - Method in interface nxopen.annotations.PmiManager
-
Deletes or replaces one annotation with another.
- deleteReport(LaminateGraphicalReport) - Method in interface nxopen.cae.LaminateGraphicalReportCollection
-
Delete a laminate graphical post report
License requirements: nx_lam_composites ("Laminate Composites")
.
- deleteReport(LaminateQuickReport) - Method in interface nxopen.cae.LaminateQuickReportCollection
-
Delete a laminate quick post report
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- deleteReport(LaminateSpreadsheetReport) - Method in interface nxopen.cae.LaminateSpreadsheetReportCollection
-
Delete a laminate spreadsheet post report
License requirements: nx_lam_composites ("Laminate Composites")
.
- deleteRepresentation(Tag) - Method in interface nxopen.uf.UFSmd
-
- deleteResult(Result) - Method in interface nxopen.cae.ResultManager
-
- deleteResult(ResultObject) - Method in interface nxopen.validate.Parser
-
Deletes result object, return error code
License requirements: None.
- deleteResultAccess(ResultAccess) - Method in interface nxopen.cae.ResultManager
-
- deleteResultMeasures(ResultMeasure[]) - Method in interface nxopen.motion.ResultMeasureCollection
-
Delete list of result measures.
- deleteResultObject(ResultObject) - Method in interface nxopen.validate.Parser
-
Deletes result object, return error list
License requirements: None.
- deleteResultParameters(ResultParameters) - Method in interface nxopen.cae.ResultManager
-
- deleteResultParametersWithNodalForceReport(ResultParametersWithNodalForceReport) - Method in interface nxopen.cae.ResultManager
-
- deleteResultParametersWithProbe(ResultParametersWithProbe) - Method in interface nxopen.cae.ResultManager
-
- deleteResults() - Method in interface nxopen.positioning.MatingConverter
-
Removes details from the mating conversion results of the individual constraints that were converted.
- deleteRetainedDraftingObjectsInCurrentLayout() - Method in interface nxopen.Part
-
Deletes all retained drafting objects in the current layout of part that are currently
in the "retained" state.
- deleteReusableConstraints() - Method in interface nxopen.tooling.AddReusablePart
-
Deletes constraints for the reusable component
License requirements: None.
- deleteReusablePocket() - Method in interface nxopen.tooling.AddReusablePart
-
Deletes pocket for a reusable component
License requirements: None.
- deleteReusablePocket() - Method in interface nxopen.tooling.FastenerAssy
-
Deletes reusable pocket
License requirements: None.
- deleteRibs(int[]) - Method in interface nxopen.cae.RemoveRibsBuilder
-
Delete given ribs.
- deleteRockerCam(String) - Method in interface nxopen.tooling.DefineCamBuilder
-
Delete the rocker cam
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- deleteRootComponent(KinematicComponent) - Method in interface nxopen.sim.KinematicConfigurator
-
Delete a root component from the
KinematicConfigurator
object
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
Created in NX7.5.0
- deleteRotaryCam(String) - Method in interface nxopen.tooling.DefineCamBuilder
-
Delete the rotary cam
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- deleteRowScalarFieldTable(String) - Method in interface nxopen.BasePropertyTable
-
Delete row operation for scalar field table
License requirements: None.
- deleteRset(UFVariant) - Method in interface nxopen.uf.UFLib
-
- deleteRule(NamingRuleBuilder) - Method in interface nxopen.ame.NamingRuleListBuilder
-
Delete rule
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- deleteRuleOverride(DesignRuleOverride) - Method in interface nxopen.routing.DesignRuleViolation
-
Override object will be deleted
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- deleteRunner() - Method in interface nxopen.tooling.RunnerBuilder
-
Deletes the runner bodies.
- deleteRunPath() - Method in interface nxopen.routing.Run
-
This will delete the Run path and member items in a run
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- deleteRuns(NXObject[]) - Method in interface nxopen.mechanicalrouting.LogicalDesignService
-
Deletes run objects.
- deleteSavedResults() - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
Deletes the saved thickness results if the thickness calculation results are no longer needed.
- deleteScenario(Tag, String) - Method in interface nxopen.uf.UFSf
-
- DeleteSeamBuilder - Interface in nxopen.features.shipdesign
-
Used to create a
DeleteSeamBuilder
which
is used to delete the seams from the ship structural components.
- deleteSearchTerms(SearchTerm[]) - Method in interface nxopen.assemblies.SubsetRecipe
-
Removes the
SearchTerm
s from the recipe and deletes them.
- deleteSections() - Method in interface nxopen.die.AddendumSectionBuilder
-
- deleteSections(boolean, DynamicSection[]) - Method in interface nxopen.display.DynamicSectionCollection
-
Deletes the specified dynamic sections in the part.
- deleteSectionSketch(Sketch) - Method in interface nxopen.features.EditCrossSectionBuilder
-
Remove the curve sketch
License requirements: None.
- deleteSegment(int) - Method in interface nxopen.features.sheetmetal.FlexibleCableBuilder
-
Deletes a cable segment at given index.
- deleteSelectedDieBase() - Method in interface nxopen.tooling.DieBaseBuilder
-
The action to delete selected die base.
- deleteSelectedGuideLine() - Method in interface nxopen.tooling.MWDesignGuideLinesBuilder
-
Button for deleting the selected guide line.
- deleteSelectedInsert() - Method in interface nxopen.tooling.SpecialFormingBuilder
-
Delete selected insert.
- deleteSelectedInsertAndWaveLinkedSource() - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder
-
Delete selected insert and wave linked source feature.
- deleteSelectedSearchResults() - Method in interface nxopen.tooldesigner.SelectFixtureUnitsBuilder
-
DeleteSelectedSearchResults
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- deleteSensor(Sensor) - Method in interface nxopen.cae.responsesimulation.SensorCollection
-
Deletes an sensor
License requirements: nx_response_anlys ("NX Response Analysis")
.
- deleteSequence(Tag) - Method in interface nxopen.uf.UFAssem
-
- deleteSetup() - Method in interface nxopen.uf.UFSetup
-
- deleteSheet(int) - Method in interface nxopen.cam.WorkInstructionBuilder
-
Delete a Work Instruction sheet
License requirements: nx_wi_authoring (" NX Work Instruction Authoring")
.
- deleteSheet(String) - Method in interface nxopen.tooling.AssemblyDrawingBuilder
-
Delete the sheet
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- deleteSheetElements(SheetElement[]) - Method in interface nxopen.ame.DiagramManager
-
Delete Sheet Element
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- deleteSheetElements(SheetElement[]) - Method in interface nxopen.pid.PidManager
-
Delete Sheet Elements.
- deleteSheets(int, int) - Method in interface nxopen.Spreadsheet
-
Deletes specified number of sheets beginning with the specified sheet
(from the current worksheet, if no sheet is specified).
- deleteSimulation(NXObject, String) - Method in interface nxopen.motion.MotionSession
-
- deleteSingleAspect(AspectNode) - Method in interface nxopen.ame.AMEManager
-
Delete the AME aspect node object and the connected EO as well as all children in all aspects
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- deleteSketch() - Method in interface nxopen.features.sheetmetal.FlangeBuilder
-
Delete the flange sketch
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB") OR nx_ship_detail ("Ship Detail Design")
.
- deleteSnapshot() - Method in interface nxopen.DrawingCompareManager
-
Deletes the cached data for drafting objects.
- deleteSolution() - Method in interface nxopen.cae.optimization.DAOSolution
-
Deletes the optimization solution
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- deleteSolution(SimSolution) - Method in interface nxopen.cae.SimSimulation
-
Delete the solution
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- deleteSolution(MotionSolution, boolean) - Method in interface nxopen.motion.MotionSolutionCollection
-
- deleteSolutionNx(Tag) - Method in interface nxopen.uf.UFSf
-
- deleteSolveoptions(DurabilitySolveOptions) - Method in interface nxopen.cae.DurabilitySolveOptionsCollection
-
Delete a durability event overrides.
- deleteSolverAppendOption(SolverAppendOption) - Method in interface nxopen.cae.CaePart
-
Deletes a solver append option object for importing the solver specific data into an existing
FemPart
or
SimPart
.
- deleteSource() - Method in interface nxopen.mechatronics.ObjectSinkBuilder
-
Returns the option to delete source.
- deleteSpecification(String) - Method in interface nxopen.routing.ReuseLibrary
-
Delete a Specification from the reuse library.
- deleteSpindleSlider(String) - Method in interface nxopen.tooling.SpindleSliderBuilder
-
Deletes the spindle slider
License requirements: nx_dievalidation ("DIE VALIDATION")
.
- deleteSpreadSheetData() - Method in interface nxopen.PartCleanup
-
Returns the option that specifies whether to delete all spreadsheets from
the part file.
- deleteStep(SimSolutionStep) - Method in interface nxopen.cae.SimSolution
-
Removes a step from the solution
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- deleteStep(Tag) - Method in interface nxopen.uf.UFAssem
-
- deleteStepNx(Tag) - Method in interface nxopen.uf.UFSf
-
- deleteStocks(NXObject[]) - Method in interface nxopen.routing.StockBrowserBuilder
-
Deletes the given
Stock
or
FittingOverstock
License requirements: routing_base ("Routing Basic")
Created in NX6.0.0
- deleteStrength(DurabilityStrength) - Method in interface nxopen.cae.DurabilityStrengthCollection
-
Delete a durability event strength settings.
- deleteSubitem(int) - Method in interface nxopen.uistyler.MultiSelectList
-
Deletes sub item
License requirements: None.
- deleteSubItem(int) - Method in interface nxopen.uistyler.SelectionBox
-
Deletes sub item
License requirements: None.
- deleteSubItem(int) - Method in interface nxopen.uistyler.SingleSelectList
-
Requests a list entry to be deleted.
- deleteSxlineSxseg(Tag) - Method in interface nxopen.uf.UFDraw
-
- deleteSymbol(int) - Method in interface nxopen.annotations.ForeshorteningSymbolBuilder
-
Delete the foreshortening symbol
License requirements: None.
- deleteSystemClass(KinematicComponentBuilder.SystemClass) - Method in interface nxopen.sim.KinematicComponentBuilder
-
Delete a system class
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- deleteTabnotCell(Tag, int, int) - Method in interface nxopen.uf.UFDraw
-
- deleteTags() - Method in interface nxopen.mechatronics.OPCClientBuilder
-
Delete item from the list.
- deleteTargetPoints(Point[]) - Method in interface nxopen.features.FitCurveBuilder
-
Deletes target points
License requirements: solid_modeling ("SOLIDS MODELING")
.
- deleteTemplate(String) - Method in interface nxopen.cae.xyplot.BaseTemplateManager
-
Deletes template file
License requirements: None.
- deleteTemporaryFacesAndEdges() - Method in interface nxopen.facet.FacetedBodyCollection
-
Delete any temporary faces and edges on faceted bodies that may have been created
in the specified part.
- deleteToMark(int, String) - Method in interface nxopen.uf.UFUndo
-
- deleteToolPath(CAMObject[]) - Method in interface nxopen.cam.CAMSetup
-
Delete tool path
License requirements: cam_base ("CAM BASE")
.
- deleteToolPath(Tag) - Method in interface nxopen.uf.UFOper
-
- deleteTrace(Tag) - Method in interface nxopen.uf.UFMotion
-
- deleteTrackChanges() - Method in interface nxopen.DrawingCompareManager
-
Delete track changes data for drafting objects in the drawing part
License requirements: None.
- deleteTrackingPoint(Tag, int) - Method in interface nxopen.uf.UFCutter
-
- deleteTransientDynamicSectionCutData() - Method in interface nxopen.Session
-
- deleteTransientMeshes(int) - Method in interface nxopen.tooling.MWPartingManagerBuilder
-
Initialize, reset or delete the transient meshes created in the Wall Thickness Checker.
- deleteTypeMapping(TypeMappingBuilder) - Method in interface nxopen.ame.TypeMappingListBuilder
-
Delete type mapping
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- deleteUde(Tag, UFUde.SetType, UFVariant) - Method in interface nxopen.uf.UFParam
-
- deleteUndoMark(int, String) - Method in interface nxopen.Session
-
Deletes an undo mark.
- deleteUndoMarksSetInTaskEnvironment() - Method in interface nxopen.Session
-
- deleteUndoMarksUpToMark(int, String, boolean) - Method in interface nxopen.Session
-
Deletes all undo marks up to and including the specified mark.
- deleteUnusedExpressions() - Method in interface nxopen.PartCleanup
-
Returns the option that specifies whether to delete expressions that are
not used in the part.
- deleteUnusedExtractReferences() - Method in interface nxopen.PartCleanup
-
Returns the option that specifies whether to delete all unused edge/face references in extract features
from the part file.
- deleteUnusedFonts() - Method in interface nxopen.PartCleanup
-
Returns the option that specifies whether to remove character fonts
that are not used in any drafting text in the current part.
- deleteUnusedObjects() - Method in interface nxopen.PartCleanup
-
Returns the option that specifies whether to delete all extraneous
objects from the work part
License requirements: None.
- deleteUnusedUnits() - Method in interface nxopen.PartCleanup
-
Returns the option that specifies whether to remove character fonts
that are not used in any drafting text in the current part.
- deleteUserAttribute(NXObject.AttributeType, String, boolean, Update.Option) - Method in interface nxopen.NXObject
-
Deletes the first attribute encountered with the given Type, Title.
- deleteUserAttributes(AttributeIterator, Update.Option) - Method in interface nxopen.NXObject
-
Deletes the attributes on the object, if any, that satisfy the given iterator
License requirements: None.
- deleteUserAttributes(NXObject.AttributeType, Update.Option) - Method in interface nxopen.NXObject
-
Deletes the attributes encountered with the given Type with option to update or not.
- deleteUserAttributeWithTitleAndType(Tag, String, int, int, boolean) - Method in interface nxopen.uf.UFAttr
-
- deleteUserClassification(String) - Method in interface nxopen.sim.KinematicConfigurator
-
Deletes a user class name from the list of user classes
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- deleteUserClassName(String) - Method in interface nxopen.sim.KinematicComponentBuilder
-
Deletes a user class from the component
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- deleteUserDefinedMotion(String) - Method in interface nxopen.tooling.UserDefinedMotionBuilder
-
Delete a user defined motion
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- deleteUserItems() - Method in interface nxopen.report.Report
-
Deletes all user items in
Report
.
- deleteUserMaterialModels() - Method in interface nxopen.PhysicalMaterial
-
Deletes User Material (UMAT) Model Property Values from a material.
- deleteUserSafePoints() - Method in interface nxopen.cam.InspectionCollisionAvoidanceBuilder
-
Returns a flag to indicate whether to delete user inserted safe points to improve path
License requirements: None.
- deleteValidator(Validator) - Method in interface nxopen.validate.ValidationManager
-
Deletes a validator.
- deleteValue(String) - Method in interface nxopen.options.ChangeList
-
Delete an option value.
- deleteVariableIncrementListData(int) - Method in interface nxopen.cam.CenterlineDrillVariableIncrementBuilder
-
Delete an existing variable increment
License requirements: cam_base ("CAM BASE")
.
- deleteView(DraftingView) - Method in interface nxopen.drawings.SheetDraftingViewCollection
-
Lets you delete the view
License requirements: None.
- deleteView(String) - Method in interface nxopen.tooling.AssemblyDrawingBuilder
-
Delete view
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- deleteView(Tag) - Method in interface nxopen.uf.UFView
-
- deleteViewCamera() - Method in interface nxopen.cam.WorkInstructionBuilder
-
Delete the view camera
License requirements: None.
- deleteViewLabel(Tag) - Method in interface nxopen.uf.UFDraw
-
- deleteViewport(int) - Method in interface nxopen.cae.Post
-
End all post processing activity in the input view port index
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- deleteViewSet(Tag) - Method in interface nxopen.uf.UFView
-
- deleteViewsInOriginalPart(DraftingView[]) - Method in interface nxopen.drawings.DraftingViewCollection
-
Deletes views in original part
License requirements: drafting ("DRAFTING")
.
- deleteViolationsOfRuleOnObject(String, NXObject) - Method in interface nxopen.routing.CustomManager
-
Finds the violation of a design rule attached to the given object and deletes it.
- deleteViolationsOnObjectForReason(CustomManager.DesignRuleReason, NXObject) - Method in interface nxopen.routing.CustomManager
-
Finds the violation of a design rule reason attached to the given object and deletes it.
- deleteVisualEditorData() - Method in interface nxopen.PartCleanup
-
Returns the option that specifies whether to delete Visual Editor data
from the part file.
- deleteVnckMachineData() - Method in interface nxopen.cam.CAMSetup
-
Removes vnck machine data
License requirements: cam_base ("CAM BASE")
.
- deleteWarningAlerts() - Method in interface nxopen.features.Feature
-
Delete all warning alerts from the features
License requirements: None.
- deleteWarningAlerts(NXObject[]) - Method in interface nxopen.features.FeatureCollection
-
Delete all warning alerts from the features and if numFrecs is 0 then delete warning alerts from all features in the part
License requirements: None.
- deleteWavedFaces() - Method in interface nxopen.tooling.BackingPadBuilder
-
Delete waved faces to support journamation
License requirements: None.
- deleteWeldFaceDefinitions(int[]) - Method in interface nxopen.cae.MeshControlBuilder
-
Delete weld face definition
License requirements: nx_masterfem ("Finite Element Modeling")
.
- deleteWidths() - Method in interface nxopen.PlotColorsWidthsBuilder
-
Delete drawing sheet widths
License requirements: None.
- deleteWorkInstructions(CAMObject[]) - Method in interface nxopen.cam.CAMSetup
-
Delete Work Instructions
License requirements: cam_base ("CAM BASE")
.
- delFacetFromModel(Tag, int) - Method in interface nxopen.uf.UFFacet
-
- delimiter() - Method in interface nxopen.ame.AspectPrefixBuilder
-
- delimiter() - Method in interface nxopen.preferences.PartDrafting
-
Returns the delimiter
License requirements: None.
- delMemberFromGroup(Tag, Tag) - Method in interface nxopen.uf.UFGroup
-
- delMemberWithRefresh(Tag, Tag) - Method in interface nxopen.uf.UFGroup
-
- delSegmentsFromList(ISegment[]) - Method in interface nxopen.routing.IPath
-
Removes segment(s) from the IPath object.
- DELTA - Static variable in class nxopen.cae.DurabilityStrainGageAnalyzerBuilder.GageTypeEnum
-
Delta
- DELTA - Static variable in class nxopen.cam.InspectionOperationTransformBuilder.Motion
-
motion delta
- DELTA - Static variable in class nxopen.cam.LaserLinearMove.MotionEnds
-
Delta
- DELTA - Static variable in class nxopen.cam.OperationTransformBuilder.Motion
-
motion delta
- DELTA - Static variable in class nxopen.cam.ToolPathEditorBuilder.MotionMethodType
-
- DELTA - Static variable in class nxopen.cam.TurnEngageRetractBuilder.Types
-
Delta
- DELTA - Static variable in class nxopen.geometricutilities.ReduceSurfaceRadiusBuilder.ReduceValueTypeSpecification
-
- DELTA_ANGLE_DISTANCE - Static variable in class nxopen.cam.TurnAvoidanceReturnBuilder.ReturnPointModes
-
Point is defined by angle and distance.
- DELTA_ANGLE_DISTANCE - Static variable in class nxopen.cam.TurnAvoidanceStartBuilder.StartPointModes
-
Point is defined by angle and distance.
- DELTA_MOVE - Static variable in class nxopen.cam.InspectionMethodBuilder.OperationTypes
-
Delta Move
- DELTA_MOVE - Static variable in class nxopen.cam.TurnAvoidanceReturnBuilder.ReturnPointModes
-
Point is defined by delta move (X and Y coordinate).
- DELTA_MOVE - Static variable in class nxopen.cam.TurnAvoidanceStartBuilder.StartPointModes
-
Point is defined by delta move (X and Y coordinate).
- DELTA_VECTOR_DISTANCE - Static variable in class nxopen.cam.TurnAvoidanceReturnBuilder.ReturnPointModes
-
Point is defined by vector and distance.
- DELTA_VECTOR_DISTANCE - Static variable in class nxopen.cam.TurnAvoidanceStartBuilder.StartPointModes
-
Point is defined by vector and distance.
- DELTA_XYZ - Static variable in class nxopen.cam.InspectionLinearMoveToPointBuilder.PointTypeEnums
-
Enter in a delta value from a point
- DELTA_XYZ - Static variable in class nxopen.geometricutilities.ModlMotion.Options
-
Move by delta XYZ
- deltaAngle - Variable in class nxopen.uf.UFView.LightAttributes
-
- deltaCamber() - Method in interface nxopen.features.vehicledesign.BaseDataLoadingWheelBuilder
-
Returns the delta camber of wheel.
- deltaEnum() - Method in interface nxopen.geometricutilities.ModlMotion
-
Returns the delta enum
License requirements: None.
- DeltaMoveBuilder - Interface in nxopen.cam
-
- DeltaMoveBuilder.IntentType - Class in nxopen.cam
-
Move Intent
- deltaStaticRadius() - Method in interface nxopen.features.vehicledesign.BaseDataLoadingWheelBuilder
-
Returns the delta static radius of wheel.
- deltaToe() - Method in interface nxopen.features.vehicledesign.BaseDataLoadingWheelBuilder
-
Returns the delta toe of wheel.
- deltaWidth() - Method in interface nxopen.features.vehicledesign.BaseDataLoadingWheelBuilder
-
Returns the delta width of wheel, for front or rear wheel, they have a wheel width.
- deltaX() - Method in interface nxopen.cam.DeltaMoveBuilder
-
Returns the delta x
License requirements: None.
- deltaX() - Method in interface nxopen.cam.InspectionDeltaMoveBuilder
-
Returns the delta X coordinate
License requirements: None.
- deltaX() - Method in interface nxopen.features.shipdesign.ShipCoordinatesBuilder
-
Returns the delta value whic is distance between current point and previous point along X-direction.
- deltaX() - Method in interface nxopen.features.vehicledesign.BaseDataLoadingWheelBuilder
-
Returns the delta x value of wheel center point.
- deltaX() - Method in interface nxopen.geometricutilities.ModlMotion
-
- deltaXc() - Method in interface nxopen.cam.InspectionOperationTransformBuilder
-
Returns the delta XC
License requirements: None.
- deltaXc() - Method in interface nxopen.cam.LaserLinearMove
-
Returns the Delta XC
License requirements: None.
- deltaXc() - Method in interface nxopen.cam.OperationTransformBuilder
-
Returns the delta XC
License requirements: None.
- deltaXC() - Method in interface nxopen.cam.ToolPathEditorBuilder
-
Returns the delta xc
License requirements: None.
- deltaXc() - Method in interface nxopen.cam.TurnEngageRetractBuilder
-
Returns the Delta XC
License requirements: None.
- deltaXc() - Method in interface nxopen.geometricutilities.ModlMotion
-
Returns the delta xc
License requirements: None.
- deltaXm() - Method in interface nxopen.cam.LaserLinearMove
-
Returns the Delta XM
License requirements: None.
- deltaY() - Method in interface nxopen.cam.DeltaMoveBuilder
-
Returns the delta y
License requirements: None.
- deltaY() - Method in interface nxopen.cam.InspectionDeltaMoveBuilder
-
Returns the delta Y coordinate
License requirements: None.
- deltaY() - Method in interface nxopen.features.shipdesign.ShipCoordinatesBuilder
-
Returns the delta value whic is distance between current point and previous point along Y-direction.
- deltaY() - Method in interface nxopen.features.vehicledesign.BaseDataLoadingWheelBuilder
-
Returns the delta y value of wheel center point.
- deltaY() - Method in interface nxopen.geometricutilities.ModlMotion
-
- deltaYc() - Method in interface nxopen.cam.InspectionOperationTransformBuilder
-
Returns the delta YC
License requirements: None.
- deltaYc() - Method in interface nxopen.cam.LaserLinearMove
-
Returns the Delta YC
License requirements: None.
- deltaYc() - Method in interface nxopen.cam.OperationTransformBuilder
-
Returns the delta YC
License requirements: None.
- deltaYC() - Method in interface nxopen.cam.ToolPathEditorBuilder
-
Returns the delta yc
License requirements: None.
- deltaYc() - Method in interface nxopen.cam.TurnEngageRetractBuilder
-
Returns the Delta YC
License requirements: None.
- deltaYc() - Method in interface nxopen.geometricutilities.ModlMotion
-
Returns the delta yc
License requirements: None.
- deltaYm() - Method in interface nxopen.cam.LaserLinearMove
-
Returns the Delta YM
License requirements: None.
- deltaZ() - Method in interface nxopen.cam.DeltaMoveBuilder
-
Returns the delta z
License requirements: None.
- deltaZ() - Method in interface nxopen.cam.InspectionDeltaMoveBuilder
-
Returns the delta Z coordinate
License requirements: None.
- deltaZ() - Method in interface nxopen.features.shipdesign.ShipCoordinatesBuilder
-
Returns the delta value which is distance between current point and previous point long Z-direction.
- deltaZ() - Method in interface nxopen.features.vehicledesign.BaseDataLoadingWheelBuilder
-
Returns the delta z value of wheel center point.
- deltaZ() - Method in interface nxopen.geometricutilities.ModlMotion
-
- deltaZc() - Method in interface nxopen.cam.InspectionOperationTransformBuilder
-
Returns the delta ZC
License requirements: None.
- deltaZc() - Method in interface nxopen.cam.LaserLinearMove
-
Returns the Delta ZC
License requirements: None.
- deltaZc() - Method in interface nxopen.cam.OperationTransformBuilder
-
Returns the delta ZC
License requirements: None.
- deltaZC() - Method in interface nxopen.cam.ToolPathEditorBuilder
-
Returns the delta zc
License requirements: None.
- deltaZc() - Method in interface nxopen.geometricutilities.ModlMotion
-
Returns the delta zc
License requirements: None.
- deltaZm() - Method in interface nxopen.cam.LaserLinearMove
-
Returns the Delta ZM
License requirements: None.
- DEMO_DIALOG_OBJECT_COUNT - Static variable in class nxopen.uf.UFConstants
-
- demoCylinderList() - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder
-
- demoldGroup() - Method in interface nxopen.cae.optimization.TBSShapeLinkCondition
-
Returns the surface nodes of demolding area
License requirements: None.
- denominator - Variable in class nxopen.drawings.DrawingSheet.ScaleData
-
- denominator() - Method in interface nxopen.drawings.ViewScaleBuilder
-
Returns the scale denominator
License requirements: None.
- denominator() - Method in interface nxopen.features.shipdesign.SectionEditorBuilder
-
Returns the denominator of the view scale
License requirements: None.
- denominator - Variable in class nxopen.layout2d.ConvertLayoutToSheetBuilder.ScaleData
-
the scale denominator
- DENSE_GRID - Static variable in class nxopen.cae.xyplot.GridStyle
-
Display dense grid
- denseColor() - Method in interface nxopen.cae.xyplot.BaseGridLayoutStyleSetting
-
- denseGridDisplayStyleSettings() - Method in interface nxopen.cae.xyplot.BaseGridLayoutStyleSetting
-
Returns the dense grid display style
License requirements: None.
- density() - Method in interface nxopen.Body
-
Returns the solid density of the body.
- density() - Method in interface nxopen.geometricanalysis.SolidDensity
-
Returns the Solid Density.
- density() - Method in interface nxopen.geometricutilities.CombOptionsBuilder
-
Returns the density
License requirements: None.
- density() - Method in interface nxopen.motion.CustomizedMaterialBuilder
-
Returns the density
License requirements: mechanisms ("MECHANISMS")
.
- DENSITY - Static variable in class nxopen.partfamily.FamilyAttribute.AttrType
-
density attribute
- density() - Method in interface nxopen.preferences.PartModeling
-
Returns the density.
- density - Variable in class nxopen.uf.UFDisp.ConeheadAttrbSTag
-
- density - Variable in class nxopen.uf.UFWeight.Properties
-
- DENSITY_TYPE - Static variable in class nxopen.Part.PartFamilyAttrType
-
Deprecated.
density attribute
- densityMove() - Method in interface nxopen.cae.optimization.TBSTopologySensitivityOptimizationParameters
-
Returns the move limit on design variables
License requirements: None.
- densityState - Variable in class nxopen.uf.UFWeight.Properties
-
- densityType - Variable in class nxopen.uf.UFSf.EfConnInfo
-
- densityType - Variable in class nxopen.uf.UFSf.Sf1dMeshData
-
- densityUnit() - Method in interface nxopen.preferences.PartModeling
-
Returns the density unit
License requirements: None.
- densityUpdateOption() - Method in interface nxopen.cae.optimization.TBSTopologySensitivityOptimizationParameters
-
Returns the parameter for how the densities are updated
License requirements: None.
- DEPARTURE - Static variable in class nxopen.cam.CamOperationMotionType
-
- DEPARTURE - Static variable in class nxopen.cam.CamPathMotionType
-
- DEPARTURE - Static variable in class nxopen.cam.MoveBuilder.Motion
-
Departure
- departure() - Method in interface nxopen.cam.PathDisplayColors
-
Returns the color departure
License requirements: None.
- DEPARTURE_ONLY - Static variable in class nxopen.cam.WedmStatusControlCiBuilder.StatusTypes
-
departure only
- departureClearanceBuilder() - Method in interface nxopen.cam.NcmTransferBuilder
-
Returns the departure clearance
License requirements: None.
- departureDistance() - Method in interface nxopen.cam.ChipControl
-
Returns the Departure Distance
License requirements: None.
- departureHeightBuilder() - Method in interface nxopen.cam.NcmTransferBuilder
-
Returns the departure height builder
License requirements: None.
- departureLengthBuilder() - Method in interface nxopen.cam.NcmTransferBuilder
-
Returns the departure length builder
License requirements: None.
- departureMethod() - Method in interface nxopen.cam.NcmTransferBuilder
-
Returns the departure method
License requirements: None.
- departurePathMode() - Method in interface nxopen.cam.TurnAvoidanceDepartureBuilder
-
Returns the departure path mode
License requirements: None.
- departurePathPointsListBuilder() - Method in interface nxopen.cam.TurnAvoidanceDepartureBuilder
-
Returns the avoidance path points list builder
License requirements: None.
- departurePostCommands() - Method in interface nxopen.cam.NcmTransferBuilder
-
Returns the departure post commands
License requirements: None.
- departureToolAxis() - Method in interface nxopen.cam.NcmTransferBuilder
-
Returns the departure tool axis
License requirements: None.
- departureToolAxisOption() - Method in interface nxopen.cam.NcmTransferBuilder
-
Returns the tool axis option for departure
License requirements: None.
- departureVector() - Method in interface nxopen.cam.NcmTransferBuilder
-
Returns the departure vector
License requirements: None.
- depCalcSymblSize() - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
Returns the dep calc symbl size
License requirements: None.
- depDispType() - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
Returns the dep disp type
License requirements: None.
- depDomColor() - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
Returns the dep dom color
License requirements: None.
- DEPENDENCIES - Static variable in class nxopen.Information.DisplayFeatureType
-
Displays dependencies information.
- DEPENDENCY_EXISTS - Static variable in class nxopen.uf.UFConstants
-
- DependencyCreatorBuilder - Interface in nxopen.mechatronics
-
- DEPENDENT - Static variable in class nxopen.cae.connections.TargetDependencyType
-
Dependent target
- DEPENDENT - Static variable in class nxopen.fields.FieldVariable.Type
-
- DEPENDENT_OBJECTS - Static variable in class nxopen.uf.UFView.CycleObjects
-
- dependentDisplay() - Method in interface nxopen.View
-
Returns an object to perform all view dependent display operations .
- dependentEdgeDensitySize() - Method in interface nxopen.cae.MeshControlDisplayOptionsBuilder
-
Returns the dependent edge density size
License requirements: None.
- dependentfeatures - Variable in class nxopen.geometricutilities.EntityUsageInfo.DependentFeaturesData
-
dependent features
- DependentFeaturesData() - Constructor for class nxopen.geometricutilities.EntityUsageInfo.DependentFeaturesData
-
- dependentFileSaveAsOption() - Method in interface nxopen.pdm.PartFromPartBuilder
-
Returns the dependent files to save during the save as operation
Deprecated in NX10 for "Save As of master parts" operation.
- dependentFileSaveAsOption() - Method in interface nxopen.pdm.PartOperationBuilder
-
- dependentFilesToCopyOption() - Method in interface nxopen.pdm.PartOperationCopyBuilder
-
Returns the Dependent files Save As option.
- DependentMesh - Interface in nxopen.cae
-
Represents Mesh Recipe
To create or edit an instance of this class, use
DependentMeshBuilder
Created in NX5.0.0
- DependentMeshBuilder - Interface in nxopen.cae
-
- DependentMeshBuilder.MeshType - Class in nxopen.cae
-
The mesh type for face dependency
- DependentMeshListItemBuilder - Interface in nxopen.cae
-
- DependentMeshListItemBuilderList - Interface in nxopen.cae
-
Represents a list of objects.
- dependentObject() - Method in interface nxopen.mechatronics.DependencyCreatorBuilder
-
Returns the dependent object.
- depLabelValues() - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
Returns the dep label values
License requirements: None.
- depRangeMax() - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
Returns the dep range max
License requirements: None.
- depRangeMin() - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
Returns the dependent range min
License requirements: None.
- depSelColor() - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
Returns the dep sel color
License requirements: None.
- depSymbolSize() - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
Returns the dep symbol size
License requirements: None.
- DEPTH - Static variable in class nxopen.annotations.HoleCalloutSettingsBuilder.Parametertype
-
- DEPTH - Static variable in class nxopen.annotations.HoleTableSettingsContentBuilder.Content
-
Depth
- depth - Variable in class nxopen.assemblies.ClearanceSet.InterferenceData
-
depth of penetration
- depth() - Method in interface nxopen.cae.xyplot.BarStyle3DSetting
-
Returns the bar depth.
- depth() - Method in interface nxopen.cam.HoleBossSet
-
Returns the Depth
License requirements: None.
- depth() - Method in interface nxopen.cam.ReliefCut
-
Returns the relief cut depth
License requirements: None.
- DEPTH - Static variable in class nxopen.cam.ReliefCut.Modes
-
Depth
- DEPTH - Static variable in class nxopen.cam.TurnGrooveCornerControl.ReliefPlungeTypes
-
Groove Corner Control Relief Plunge Type is Depth.
- depth() - Method in interface nxopen.die.FingerClearanceNotchBuilder
-
Returns the expression containing the value for the clearance to provide into the target solid.
- depth() - Method in interface nxopen.die.HandlingCoreBuilder
-
Returns the expression containing the value to use for the extrusion depth when creating the core.
- depth() - Method in interface nxopen.die.HandlingCoreChildBuilder
-
Returns the depth of the handling core.
- depth() - Method in interface nxopen.die.HandlingCoreParentBuilder
-
Returns the depth of handling cores.
- depth() - Method in interface nxopen.die.HoleChildBuilder
-
Returns the depth of the die hole.
- depth() - Method in interface nxopen.die.HoleParentBuilder
-
Returns the depth of die holes.
- depth() - Method in interface nxopen.die.KeywayChildBuilder
-
Returns the depth of the keyway.
- depth() - Method in interface nxopen.die.KeywayParentBuilder
-
Returns the depth of keyways.
- depth() - Method in interface nxopen.die.PierceHoleChildBuilder
-
Returns the depth of the pierce hole
License requirements: ug_die_design ("Die Design")
.
- depth() - Method in interface nxopen.die.PierceHoleParentBuilder
-
Returns the depth of pierce holes
License requirements: ug_die_design ("Die Design")
.
- depth() - Method in interface nxopen.features.BridgeCurveBuilder
-
- depth - Variable in class nxopen.features.Hole.CounterboreHoleData
-
Expression for depth
- depth - Variable in class nxopen.features.Hole.CountersinkHoleData
-
Expression for depth
- depth() - Method in interface nxopen.features.Hole
-
Returns
the depth of the hole.
- depth - Variable in class nxopen.features.Hole.SimpleHoleData
-
Expression for depth
- depth() - Method in interface nxopen.features.HoleFeatureBuilder
-
Returns
the depth of the hole.
- depth() - Method in interface nxopen.features.sheetmetal.AeroJoggleBuilder
-
Returns the depth expression.
- depth() - Method in interface nxopen.features.sheetmetal.GussetBuilder
-
Returns the depth
This value is used for the automatic profile Gussets.
- depth() - Method in interface nxopen.features.sheetmetal.JoggleInputListItemBuilder
-
Returns the depth
License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- depth() - Method in interface nxopen.features.sheetmetal.LouverBuilder
-
Returns the depth of the louver
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- depth() - Method in interface nxopen.features.sheetmetal.NormalCutoutBuilder
-
Returns the depth of the cutout.
- depth() - Method in interface nxopen.features.shipdesign.PlateChamferBuilder
-
Returns the depth
License requirements: None.
- DEPTH - Static variable in class nxopen.features.shipdesign.PlateChamferBuilder.OffsetMethod
-
Use depth parameter to define ramp
- DEPTH - Static variable in class nxopen.features.StyledBlendBuilder.StyledBlendShapeControlType
-
Depth control
- depth() - Method in interface nxopen.geometricutilities.BoundaryDefinitionBuilder
-
Returns the region depth
License requirements: None.
- depth() - Method in interface nxopen.geometricutilities.ConicCrossSection
-
Returns the depth expression for the conic section with face blend
License requirements: None.
- depth() - Method in interface nxopen.geometricutilities.DepthSkewBuilder
-
Returns the depth
License requirements: None.
- depth - Variable in class nxopen.uf.UFCamgeom.CustomPoint
-
- depth - Variable in class nxopen.uf.UFModl.AskBallSlotParmsData
-
- depth - Variable in class nxopen.uf.UFModl.AskDovetailSlotParmsData
-
- depth - Variable in class nxopen.uf.UFModl.AskRectSlotParmsData
-
- depth - Variable in class nxopen.uf.UFModl.AskUSlotParmsData
-
- depth - Variable in class nxopen.uf.UFModl.SmholeData
-
- depth - Variable in class nxopen.uf.UFModl.SmpunchData
-
- depth - Variable in class nxopen.uf.UFModl.SmslotData
-
- depth - Variable in class nxopen.uf.UFModl.StycornerCrvOpt
-
- depth - Variable in class nxopen.uf.UFModlFeatures.AskCylPocketParmsData
-
- depth - Variable in class nxopen.uf.UFModlFeatures.AskSimpleHoleParmsData
-
- depth - Variable in class nxopen.uf.UFModlFeatures.AskTaperHoleParmsData
-
- depth - Variable in class nxopen.uf.UFPath.LevelMarker
-
- depth1 - Variable in class nxopen.uf.UFModlFeatures.AskCBoreHoleParmsData
-
- depth1 - Variable in class nxopen.uf.UFModlFeatures.AskCSunkHoleParmsData
-
- depth2 - Variable in class nxopen.uf.UFModlFeatures.AskCBoreHoleParmsData
-
- DEPTH_AND_ANGLE - Static variable in class nxopen.cam.ThreadTurningBuilder.DepthOptionTypes
-
Depth and Angle
- DEPTH_AND_SKEW - Static variable in class nxopen.features.StyledCornerBuilder.ShapeControlMethodsTypes
-
Depth and skew
- DEPTH_FIRST - Static variable in class nxopen.cam.CutParametersCutOrderTypes
-
depth first type
- DEPTH_FIRST_ALWAYS - Static variable in class nxopen.cam.CutParametersCutOrderTypes
-
depth first always type
- DEPTH_FIT - Static variable in class nxopen.annotations.HoleTableSettingsContentBuilder.Content
-
DepthFit
- DEPTH_PASSES_FIRST - Static variable in class nxopen.cam.MultiplePassesBuilder.OrderTypes
-
Depth First
- DEPTH_SKEW - Static variable in class nxopen.features.BridgeCurveBuilderEx.ShapeControlMethods
-
Shape using depth and skew value
- DEPTH_SMHOLE - Static variable in class nxopen.uf.UFModl.SmholeType
-
- DEPTH_SMSLOT - Static variable in class nxopen.uf.UFModl.SmslotType
-
- DEPTH_TOLERANCE_TYPE - Static variable in class nxopen.uf.UFGdt.ToleranceType
-
- DEPTH_VALUE - Static variable in class nxopen.drawings.ViewProjectionPlaneBuilder.PlaneOptions
-
Get plane using source view and depth value
- depthBuilder() - Method in interface nxopen.cam.HoleBossSet
-
Returns the depth builder
License requirements: None.
- depthDimension() - Method in interface nxopen.features.ShelfBuilder
-
Returns the depth dimension
License requirements: None.
- depthDistance() - Method in interface nxopen.cam.CenterlineDrillTurningBuilder
-
Returns the depth distance
License requirements: None.
- depthDistance() - Method in interface nxopen.cam.InspectionDeltaMoveBuilder
-
Returns the depth distance
License requirements: None.
- depthDistance() - Method in interface nxopen.cam.InspectionLinear5axisMoveToPointBuilder
-
Returns the depth distance
License requirements: None.
- depthDistance() - Method in interface nxopen.cam.InspectionLinearMoveToPointBuilder
-
Returns the depth distance
License requirements: None.
- depthDistance() - Method in interface nxopen.cam.InspectionMeasurePointBuilder
-
Returns the depth distance
License requirements: None.
- depthDistance() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns the depth distance
License requirements: None.
- depthDistance() - Method in interface nxopen.cam.InspectionScanArcBuilder
-
Returns the depth distance
License requirements: None.
- depthDistance() - Method in interface nxopen.cam.InspectionScanCurve5AxisBuilder
-
Returns the depth distance
License requirements: None.
- depthDistance() - Method in interface nxopen.cam.InspectionScanCurveBuilder
-
Returns the depth distance
License requirements: None.
- depthDistance() - Method in interface nxopen.cam.InspectionScanHelixBuilder
-
Returns the depth distance
License requirements: None.
- depthDistance() - Method in interface nxopen.cam.InspectionScanLineBuilder
-
Returns the depth distance
License requirements: None.
- depthDistance() - Method in interface nxopen.cam.InspectionUVGridBuilder
-
Returns the depth distance
License requirements: None.
- depthEndPoint() - Method in interface nxopen.cam.CenterlineDrillTurningBuilder
-
Returns the depth end point
License requirements: None.
- depthIncrement() - Method in interface nxopen.cam.MultiplePassesBuilder
-
Returns the Depth Increment
License requirements: None.
- depthLaw() - Method in interface nxopen.features.StyledBlendBuilder
-
Returns the depth
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- depthLawControl() - Method in interface nxopen.geometricutilities.ConicCrossSection
-
Returns the Depth Law builder
License requirements: None.
- depthLimit() - Method in interface nxopen.cam.HoleBossGeom
-
- depthLimit() - Method in interface nxopen.cam.HoleBossSet
-
Returns the Depth Limit types
License requirements: None.
- depthMeasurementDatum() - Method in interface nxopen.annotations.HoleTableSettingsFormatBuilder
-
Returns the depth measurement datum
License requirements: None.
- depthMethod() - Method in interface nxopen.cam.InspectionDeltaMoveBuilder
-
Returns the depth method
License requirements: None.
- depthMethod() - Method in interface nxopen.cam.InspectionLinear5axisMoveToPointBuilder
-
Returns the depth method
License requirements: None.
- depthMethod() - Method in interface nxopen.cam.InspectionLinearMoveToPointBuilder
-
Returns the depth method
License requirements: None.
- depthMethod() - Method in interface nxopen.cam.InspectionMeasurePointBuilder
-
Returns the depth method
License requirements: None.
- depthMethod() - Method in interface nxopen.cam.InspectionScanArcBuilder
-
Returns the depth method
License requirements: None.
- depthMethod() - Method in interface nxopen.cam.InspectionScanCurve5AxisBuilder
-
Returns the depth method
License requirements: None.
- depthMethod() - Method in interface nxopen.cam.InspectionScanCurveBuilder
-
Returns the depth method
License requirements: None.
- depthMethod() - Method in interface nxopen.cam.InspectionScanHelixBuilder
-
Returns the depth method
License requirements: None.
- depthMethod() - Method in interface nxopen.cam.InspectionScanLineBuilder
-
Returns the depth method
License requirements: None.
- depthMethod() - Method in interface nxopen.cam.InspectionUVGridBuilder
-
Returns the depth method
License requirements: None.
- depthMethod() - Method in interface nxopen.features.ShelfBuilder
-
Returns the depth method
License requirements: None.
- depthMethod() - Method in interface nxopen.features.StepBuilder
-
Returns the selected step depth method
License requirements: None.
- depthMode() - Method in interface nxopen.cam.BladeCutLevels
-
Returns the depth mode
License requirements: None.
- depthOfFieldToggle() - Method in interface nxopen.display.CameraBuilder
-
Returns the depth of field toggle
License requirements: None.
- depthOffset() - Method in interface nxopen.cam.CenterlineDrillTurningBuilder
-
Returns the depth offset value
License requirements: None.
- depthOption() - Method in interface nxopen.cam.CenterlineDrillTurningBuilder
-
Returns the depth option
License requirements: None.
- depthOption() - Method in interface nxopen.cam.ThreadTurningBuilder
-
Returns the depth option
License requirements: None.
- depthOption() - Method in interface nxopen.features.HolePackageBuilder
-
Returns the hole depth option
License requirements: None.
- depthOption() - Method in interface nxopen.geometricutilities.ConicCrossSection
-
Returns the depth option for the conic section with face blend
License requirements: None.
- depthOption() - Method in interface nxopen.geometricutilities.EndHoleData
-
Returns the hole depth option
License requirements: None.
- depthPerCut() - Method in interface nxopen.cam.AreaMillingSteepContainment
-
Returns the builder of area milling depth per cut
License requirements: None.
- depthPerCut() - Method in interface nxopen.cam.BladeCutLevels
-
Returns the depth per cut
License requirements: None.
- depthPerCut() - Method in interface nxopen.cam.FlowCutSteepContainment
-
Returns the builder of flow cut depth per cut
License requirements: None.
- depthPerCut() - Method in interface nxopen.cam.PlanarOperationBuilder
-
Returns the depth per cut builder (inheritable double)
License requirements: None.
- depthPerRevolution() - Method in interface nxopen.cam.CylinderMillingBuilder
-
Returns the Depth per Revolution
License requirements: None.
- depthReference() - Method in interface nxopen.cam.CenterlineDrillTurningBuilder
-
Returns the depth reference
License requirements: None.
- depthresult - Variable in class nxopen.assemblies.ClearanceSet.InterferenceData
-
result status of penetration depth calculation
- depthRootOpeningNumberOfWelds() - Method in interface nxopen.annotations.LineWeldSideData
-
Returns the depth or root opening or number of welds as the case may be
License requirements: None.
- depthSide() - Method in interface nxopen.features.sheetmetal.LouverBuilder
-
Returns the depth side for the louver.
- depthSide() - Method in interface nxopen.features.sheetmetal.NormalCutoutBuilder
-
Returns the depth side for the normal cutout.
- depthSkew() - Method in interface nxopen.features.BridgeCurveBuilderEx
-
Returns the depth skew
License requirements: None.
- depthSkew() - Method in interface nxopen.features.EdgeSymmetryBuilder
-
Returns the depth and skew value
License requirements: None.
- depthSkew() - Method in interface nxopen.features.MatchEdgeBuilder
-
Returns the depth skew
License requirements: None.
- DepthSkewBuilder - Interface in nxopen.geometricutilities
-
This class provides ability to specify a depth and a skew value.
- depthSortedWireframe() - Method in interface nxopen.preferences.VisualizationLine
-
Returns the depth sorted wireframe.
- depthStepMethod() - Method in interface nxopen.cam.MultiplePassesBuilder
-
Returns the Depth Step Method
License requirements: None.
- depthTitle - Variable in class nxopen.die.HoleChildBuilder.HoleAttributesData
-
Title for depth attribute.
- depthTitle - Variable in class nxopen.die.HoleParentBuilder.HoleAttributesData
-
Title for depth attribute.
- DepthTolerance() - Constructor for class nxopen.uf.UFGdt.DepthTolerance
-
- DepthTolerance(double, UFGdt.ToleranceValue, UFGdt.ToleranceValue, UFGdt.TolFormat, int) - Constructor for class nxopen.uf.UFGdt.DepthTolerance
-
- depthType() - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder
-
Returns the depth setting
License requirements: None.
- depthType() - Method in interface nxopen.cam.ProbeCalibrateStylusMoveBuilder
-
Returns the depth type
License requirements: None.
- depthType() - Method in interface nxopen.cam.ProbeInspectBorebossMoveBuilder
-
Returns the depth type
License requirements: None.
- depthType() - Method in interface nxopen.features.sheetmetal.DimpleBuilder
-
Returns the Direction in which the Dimple is punched.
- depthType() - Method in interface nxopen.features.sheetmetal.DrawnCutoutBuilder
-
Returns the Direction in which the Drawn Cutout is punched.
- depthType() - Method in interface nxopen.features.sheetmetal.NormalCutoutBuilder
-
Returns the depth type for the normal cutout.
- depthUnit() - Method in interface nxopen.cam.ReliefCut
-
Returns the relief cut depth unit
License requirements: None.
- depthValue() - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder
-
Returns the depth value
License requirements: None.
- depthValue() - Method in interface nxopen.drawings.ViewProjectionPlaneBuilder
-
Returns the depth value
License requirements: None.
- depUdeSet() - Method in interface nxopen.cam.NcmTransferBuilder
-
Returns the Depature UDE Set
License requirements: cam_base ("CAM BASE")
.
- derivatives - Variable in class nxopen.uf.UFEval.EvaluateData
-
- derivebeamres() - Method in interface nxopen.cae.ResultVariable
-
Returns the Derive beam results
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- DERIVED - Static variable in class nxopen.die.DrawBeadBuilder.FemaleDepthTypes
-
The female depth is derived from the male bead (Max Male Depth + Constant).
- DERIVED - Static variable in class nxopen.die.DrawBeadBuilder.FemaleWidthTypes
-
The female width is derived from the male (Male Width + 2(Sheet Metal Thickness + Clearance)).
- DERIVED - Static variable in class nxopen.die.DrawBeadSegmentBuilder.MaleBeadWidthTypes
-
The male bead width is derived from the width specified for the female.
- DERIVED - Static variable in class nxopen.drawings.SketchSectionLineBuilder.Type
-
- derived() - Method in interface nxopen.weld.DatumCommonBuilder
-
Returns the indicator if this should be marked as a derived from another datum.
- derived() - Method in interface nxopen.weld.DatumIconBuilder
-
Returns the indicator if this datum was derived from another datum.
- DERIVED_COMPONENT - Static variable in class nxopen.cae.Result.TensorDerivedAbsolute
-
Absolute of current derived components
- derivedDatum() - Method in interface nxopen.weld.DatumPinBuilder
-
Returns the derived datum
License requirements: None.
- derivedDatum() - Method in interface nxopen.weld.DatumSurfaceBuilder
-
Returns the derived datum
License requirements: None.
- desc - Variable in class nxopen.uf.UFUgmgr.VariantConfiguration
-
- DESCENDING - Static variable in class nxopen.ame.SortingBlockBuilder.Order
-
- DESCENDING - Static variable in class nxopen.blockstyler.Tree.ColumnSortOption
-
Descending
- DESCENDING - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.SortOrderType
-
Sort descending
- DESCENDING - Static variable in class nxopen.tooling.BomListBuilder.BomListSortOption
-
Descending
- descr - Variable in class nxopen.uf.UFLayer.CategoryInfo
-
- description() - Method in interface nxopen.ame.BasicPropertiesBuilder
-
Returns the description
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- description() - Method in interface nxopen.ame.CabinetDesignBuilder
-
Returns the description of cabinet design
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- description() - Method in interface nxopen.ame.EditQueryBuilder
-
Returns the description
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- description() - Method in interface nxopen.ame.EplanSettingsBuilder
-
Returns the description
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- description() - Method in interface nxopen.ame.ImportEplanPageMacroBuilder
-
Returns the description
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- description() - Method in interface nxopen.ame.PageBuilder
-
Returns the Page description
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- description() - Method in interface nxopen.ame.PlcMemoryAreaBuilder
-
Returns the Description
License requirements: None.
- description() - Method in interface nxopen.ame.PlcSymbolBuilder
-
Returns the string description
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- description() - Method in interface nxopen.ame.QueryBuilder
-
Returns the query description
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- description() - Method in interface nxopen.ame.SubnetBuilder
-
Returns the subnet description
License requirements: None.
- description() - Method in interface nxopen.assemblies.productinterface.PropertyBuilder
-
Returns the description of a product interface provided by users
License requirements: None.
- description() - Method in interface nxopen.assemblies.Subset
-
Returns the description of this subset.
- description() - Method in interface nxopen.cae.aerostructures.MarginCalculationBuilder
-
Returns the description.
- description() - Method in interface nxopen.cae.aerostructures.MarginSolutionBuilder
-
Returns a Get the metasolution description
License requirements: nx_masterfem ("Finite Element Modeling")
.
- description - Variable in class nxopen.cae.BaseResultType.AskComponentsData
-
- description() - Method in interface nxopen.cae.DurSpecialistLoadProviderBuilder
-
Returns the description.
- description() - Method in interface nxopen.cae.LaminatePly
-
Returns the ply description
License requirements: None.
- description() - Method in interface nxopen.cae.qualityaudit.Action
-
Returns the action description
License requirements: None.
- description() - Method in interface nxopen.cae.qualityaudit.Result
-
Returns the text description of this result
License requirements: None.
- description - Variable in class nxopen.cae.Result.AskResultLoadcaseValueData
-
- description - Variable in class nxopen.cae.Result.AskResultTypesData
-
- description - Variable in class nxopen.cae.ResultAccess.AskResultComponentsData
-
- description() - Method in interface nxopen.cae.SimConditionTimeStep
-
Returns the Time Step description
License requirements: None.
- description() - Method in interface nxopen.cae.SimLoadRecipe
-
- description - Variable in class nxopen.cam.CAMSetup.PartMaterialData
-
- description - Variable in class nxopen.cam.FeatureGeomBuilder.MaterialData
-
- description() - Method in interface nxopen.cam.NCGroupBuilder
-
Returns the description
License requirements: cam_base ("CAM BASE")
.
- description() - Method in interface nxopen.cam.OperationBuilder
-
Returns the description
License requirements: cam_base ("CAM BASE")
.
- description - Variable in class nxopen.cam.ToolBuilder.MaterialData
-
- description() - Method in interface nxopen.diagramming.SheetBuilder
-
Returns the description that will be visible when a template is selected in the Item Rev dialog.
- description() - Method in interface nxopen.drawings.MarkAsTemplateBuilder
-
Returns the detailed description for each template.
- description() - Method in interface nxopen.ErrorInfo
-
Returns a description of the error
License requirements: None.
- description() - Method in interface nxopen.Expression
-
Returns the description of the expression.
- description() - Method in interface nxopen.features.shipdesign.SteelDistributionBuilder
-
Returns the description
License requirements: None.
- description() - Method in interface nxopen.features.vehicledesign.BaseDataPassengerBuilder
-
Returns the name or short description of the passenger.
- description() - Method in interface nxopen.formboard.UpdateDiscrepancy
-
Returns the description string of the discrepancy.
- description() - Method in interface nxopen.layer.Category
-
Returns the category's description, if one exists
License requirements: None.
- description() - Method in interface nxopen.motion.MotionSolutionBuilder
-
Returns the description
License requirements: None.
- description() - Method in interface nxopen.PhysicalMaterialBuilder
-
Returns the material description value.
- description() - Method in interface nxopen.preferences.RoutingApplicationView
-
Returns the application view description.
- DESCRIPTION - Static variable in class nxopen.preferences.SessionAssemblies.PartNameOption
-
- description() - Method in interface nxopen.presslinesimulation.HydraulicLifterBuilder
-
Returns the description of the hydraulic lifter.
- description() - Method in interface nxopen.presslinesimulation.LinearCamBuilder
-
Returns the description of the cam.
- description() - Method in interface nxopen.presslinesimulation.RotaryCamBuilder
-
Returns the description of the cam.
- description() - Method in interface nxopen.presslinesimulation.UserMotionBuilder
-
Returns the description of the motion.
- description() - Method in interface nxopen.routing.DesignRule
-
- description - Variable in class nxopen.sim.IsvControlPanelBuilder.DetailData
-
- description() - Method in interface nxopen.Step203Creator
-
- description() - Method in interface nxopen.Step214Creator
-
- description() - Method in interface nxopen.StepCreator
-
Returns the description
License requirements: None.
- description() - Method in interface nxopen.tooling.FlowAnalysisBuilder
-
Returns the size information of injection gates
License requirements: None.
- Description() - Constructor for class nxopen.uf.UFGdt.Description
-
- Description(String, String) - Constructor for class nxopen.uf.UFGdt.Description
-
- description - Variable in class nxopen.uf.UFGdt.Description
-
- description - Variable in class nxopen.uf.UFGdt.DrfData
-
- description - Variable in class nxopen.uf.UFSmd.FormOutput
-
- description - Variable in class nxopen.uf.UFSmd.SeqInput
-
- description - Variable in class nxopen.uf.UFSmd.SeqOutput
-
- description() - Method in interface nxopen.visualreporting.Condition
-
- description() - Method in interface nxopen.visualreporting.VisualReport
-
Returns the description of this
VisualReport
License requirements: None.
- DESCRIPTION_MAX_LENGTH - Static variable in interface nxopen.layer.Category
-
- descriptionOfVisualReport() - Method in interface nxopen.visualreporting.VisualReportBuilder
-
Returns the description of the
VisualReport
being built by this
builder.
- descriptions - Variable in class nxopen.uf.UFClone.AskCvtCallbacksData
-
- descriptions - Variable in class nxopen.uf.UFClone.AskNtfyCallbacksData
-
- descriptions - Variable in class nxopen.uf.UFModlGeneral.AskExpDescOfFeatData
-
- descriptions - Variable in class nxopen.uf.UFModlGeneral.AskExpDescOfFrecData
-
- descriptions - Variable in class nxopen.uf.UFModlGeneral.AskRpoDescOfFeatData
-
- descriptions - Variable in class nxopen.uf.UFModlGeneral.AskRpoDescOfFrecData
-
- DESCRIPTIVE_PART_NAME_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
-
Descriptive part name
- descriptiveCategory() - Method in interface nxopen.visualreporting.VisualReport
-
- descriptiveCategoryOfVisualReport() - Method in interface nxopen.visualreporting.VisualReportBuilder
-
Returns the descriptive category of the
VisualReport
being built by this builder.
- descriptiveModifier() - Method in interface nxopen.annotations.PartIdentificationBuilder
-
Returns the descriptive modifier
License requirements: None.
- descriptiveName() - Method in interface nxopen.tooling.ReusableObject
-
Returns the descriptive name
License requirements: None.
- descriptiveName() - Method in interface nxopen.tooling.SelectReuseLibraryItemBuilder
-
Returns the descriptive name
License requirements: None.
- descriptiveName() - Method in interface nxopen.tooling.SpreadsheetDataParameter
-
Returns the descriptive name of the parameter
License requirements: None.
- descriptorCharxType() - Method in interface nxopen.routing.RoutePartDescriptor
-
Returns the charx type for the part descriptor used by Routing.
- descriptorName() - Method in interface nxopen.cae.CaeRegion
-
Returns the name of the region descriptor
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- descriptorName() - Method in interface nxopen.cae.GeneralGeometryBeamSectionBuilder
-
Returns the section descriptor name
License requirements: None.
- descriptorName() - Method in interface nxopen.cae.SimBC
-
Returns the name of the bc
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- descriptorName() - Method in interface nxopen.cae.SimConstraintSet
-
Returns the name of the constraint set descriptor
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- descriptorName() - Method in interface nxopen.cae.SimConstraintSetBuilder
-
Returns the name of the constraint set descriptor
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- descriptorName() - Method in interface nxopen.cae.SimLoadSet
-
Returns the name of the load set descriptor
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- descriptorName() - Method in interface nxopen.cae.SimRecipe
-
Returns the descriptor name defines the sim recipe object type.
- descriptorName() - Method in interface nxopen.cae.StandardBeamSectionBuilder
-
Returns the section descriptor name
License requirements: None.
- descriptorName() - Method in interface nxopen.cae.UserDefinedSolidBeamSectionBuilder
-
Returns the section descriptor name
License requirements: None.
- descriptorNeutralName() - Method in interface nxopen.BasePropertyTable
-
Returns the neutral name of the property table's descriptor
License requirements: None.
- descriptorSourceType() - Method in interface nxopen.routing.RoutePartDescriptor
-
Returns the descriptor type for the part descriptor used by Routing.
- descriptorSpecificName() - Method in interface nxopen.BasePropertyTable
-
Returns the language specific name of the property table's descriptor
License requirements: None.
- descriptorType() - Method in interface nxopen.cae.NamedPropertyTable
-
Returns the descriptor name defines the type of the property table in named property table holder
License requirements: nx_masterfem ("Finite Element Modeling")
.
- DESELECT - Static variable in class nxopen.blockstyler.Wizard.SubNodeAction
-
Sub-node has been deselected.
- deselect(Action) - Method in interface nxopen.cae.qualityaudit.ActionList
-
Deselect the specified action to avoid using it in the quality audit.
- deselect(NXObject) - Method in interface nxopen.cae.qualityaudit.InputList
-
Mark the specified object to be excluded from the quality audit actions.
- deselect(int) - Method in interface nxopen.uistyler.MultiSelectList
-
Requests a list entry to be deselected.
- DESELECT_ALL - Static variable in class nxopen.assemblies.AssembliesEventTypes
-
deselect all that is currently selected event
- deselectAll() - Method in interface nxopen.cae.qualityaudit.ActionList
-
Deselect all available actions.
- deselectAll() - Method in interface nxopen.cae.qualityaudit.InputList
-
- deselectAllEntities() - Method in interface nxopen.cae.ModelUpdateDesignVariablesRapidCreateBuilder
-
This command deselects all the entities.
- deselectAllFields() - Method in interface nxopen.cae.ModelUpdateDesignVariablesRapidCreateBuilder
-
This command deselects all the fields.
- deselectAllObjectsInNavigators() - Method in interface nxopen.routing.RouteManager
-
Deselects all objects in both the Component and Connection Navigators.
- deselectColoredRegion(int) - Method in interface nxopen.geometricutilities.ColorCodedRegionBuilder
-
Deselect Colored Region
License requirements: None.
- deselectCurves(NXObject[]) - Method in interface nxopen.features.CurveFinderBuilder
-
Removes curves from collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- deselectDivideLocation(Point3d) - Method in interface nxopen.features.TrimCurve2Builder
-
The function deselects the divide location.
- DESELECTED - Static variable in class nxopen.routing.CustomManager.SelectionType
-
The objects were deselected.
- deselectEntities(NXObject[]) - Method in interface nxopen.features.FaceRecognitionBuilder
-
Removes entities from collector
License requirements: gateway ("UG GATEWAY")
.
- deselectFaces(DisplayableObject[]) - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder
-
Deselects faces
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- deselectFaces(DisplayableObject[]) - Method in interface nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder
-
Deselects faces
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- deselectFirstEdgeFace(DisplayableObject, DisplayableObject) - Method in interface nxopen.geometricanalysis.SurfaceContinuityAnalysisBuilder
-
Deselection of first edge or face
License requirements: gateway ("UG GATEWAY")
.
- deselectFrfsubsets(String[]) - Method in interface nxopen.cae.FrfSetBuilder
-
Deselect the frf subset that should not be used.
- deselection - Variable in class nxopen.Selection.SelectionDescriptor
-
- deselectNonPlanarObject(NXObject[]) - Method in interface nxopen.tooling.ReusePositioningObjectBuilder
-
Deselected the edge or non planar face
License requirements: None.
- deselectPoles(int, int[], Point[]) - Method in interface nxopen.geometricutilities.ControlPoleManagerData
-
Removes selected pole
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- deselectPortion(Point3d, NXObject, NXObject, Section.DeselectOption) - Method in interface nxopen.Section
-
Deselects Portion of the section depending on the option provided.
- deselectRegion(Point3d) - Method in interface nxopen.SketchAssociativeTrimBuilder
-
The region corresponding to help point will be delsected from being kept/discarded depending
on trim type
License requirements: solid_modeling ("SOLIDS MODELING")
.
- deselectSecondEdgeFace(DisplayableObject, DisplayableObject) - Method in interface nxopen.geometricanalysis.SurfaceContinuityAnalysisBuilder
-
Deselection of second edge or face
License requirements: gateway ("UG GATEWAY")
.
- deselectSnapPoint(TaggedObject, Point3d) - Method in interface nxopen.features.CurveFinderBuilder
-
Removes snap point from collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- deselectSubItem(int) - Method in interface nxopen.uistyler.SelectionBox
-
Requests a list entry to be deselected.
- deselectSubItem(int) - Method in interface nxopen.uistyler.SingleSelectList
-
Requests a list entry to be deselected.
- deselectSymmetryReference(NXObject) - Method in interface nxopen.features.CurveFinderBuilder
-
Deselect entity for symmetry reference
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- deselectTrackingPoint(Tag, String) - Method in interface nxopen.uf.UFOper
-
- deselectTrimRegion(Point3d) - Method in interface nxopen.features.TrimCurve2Builder
-
The function sets help point for region select.
- DESIGN_AREA - Static variable in class nxopen.cae.optimization.TBSGroupDefinition.DefinitionType
-
Defines a group refer to design area
- DESIGN_CONTROL_ELEMENT - Static variable in class nxopen.assemblies.CollaborativeContentType
-
Design Control Element
- DESIGN_CONTROL_ELEMENT - Static variable in class nxopen.FileNewTemplateType
-
Specifies a file new design control element template
- DESIGN_CONTROL_ELEMENT - Static variable in class nxopen.issue.IssueAttachment.Type
-
Design Control Element type
- DESIGN_CONTROL_ELEMENT - Static variable in class nxopen.pdm.DesignElementRevision.DesignElementCategory
-
- DESIGN_CYCLE - Static variable in class nxopen.cae.BaseIteration.IterationValueType
-
Value represents a DesignCycle
- DESIGN_CYCLE - Static variable in class nxopen.cae.ResultProbeBuilder.SuperIterType
-
- DESIGN_DRF - Static variable in class nxopen.cam.InspectionMeasDataBuilder.DisplayTransformTypes
-
Design DRF
- DESIGN_ELEMENT - Static variable in class nxopen.assemblies.ComponentAssembly.CheckinCheckoutOption
-
Checks in or Checks out the design element
- DESIGN_ELEMENT - Static variable in class nxopen.assemblies.FindInCollaborativeDesign.ObjectType
-
Search for Design Elements
- DESIGN_ELEMENT - Static variable in class nxopen.FileNewTemplateType
-
Specifies a file new design element template
- DESIGN_FEATURE - Static variable in class nxopen.assemblies.CollaborativeContentType
-
Design Feature
- DESIGN_FEATURE - Static variable in class nxopen.FileNewTemplateType
-
Specifies a file new design feature template (actually has no file)
- DESIGN_LIMIT - Static variable in class nxopen.validate.RequirementBuilder.RequirementTypeOptions
-
- DESIGN_MODE - Static variable in class nxopen.features.shipdesign.CompareModeBuilder.CompareMode
-
- DESIGN_MODE - Static variable in class nxopen.features.shipdesign.SetModeBuilder.DesMfgMode
-
- DESIGN_RULES - Static variable in class nxopen.routing.electrical.ElectricalStockDevice.AutoRouteSel
-
- DESIGN_TOOLS - Static variable in class nxopen.tooling.DieBaseBuilder.Types
-
die base design tools
- designAngle - Variable in class nxopen.uf.UFSmd.SeqOutput
-
- designArea() - Method in interface nxopen.cae.optimization.TBSOptimizationSolution
-
Returns the design area that will be modified during optimization
License requirements: None.
- designateFormboardPlacementCSys(CoordinateSystem) - Method in interface nxopen.routing.RouteManager
-
Designates the passed in Coordinate System as a Formboard Placement Coordinate System for the part
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- designConstraint() - Method in interface nxopen.cae.optimization.DAOSolution
-
Returns the optimization design constraint collection.
- DesignContextBuilder - Interface in nxopen.pid
-
Represents a builder class that performs PID Design Context operations.
- designCreation() - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder
-
Returns the design feature creation type
License requirements: None.
- designCycleIndex() - Method in interface nxopen.cae.ResultProbeBuilder
-
Returns the desingCycle index
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- designCycles - Variable in class nxopen.uf.UFSf.AskDursolNxData
-
- designData() - Method in interface nxopen.features.vehicledesign.BaseDataLoadingWheelBuilder
-
Returns the design data of the wheel.
- DesignElementBuilder - Interface in nxopen.assemblies
-
Represents a builder class that performs various design element operations.
- DesignElementBuilder.EditActionType - Class in nxopen.assemblies
-
Represents the edit action on a design element
- DesignElementBuilder.LayerOptionType - Class in nxopen.assemblies
-
Represents the layer option of a design element
- DesignElementBuilder.OperationType - Class in nxopen.assemblies
-
Represents an operation type that can be performed on a design element
- DesignElementBuilder.PositionData - Class in nxopen.assemblies
-
- DesignElementBuilder.PositioningOption - Class in nxopen.assemblies
-
Represents the positioning option of a design element.
- DesignElementBuilder.ReferenceSetType - Class in nxopen.assemblies
-
Represents the reference set of a design element
- DesignElementBuilder.SaveAsActionType - Class in nxopen.assemblies
-
Represents the save as action on a design element
- DesignElementBuilder.StateType - Class in nxopen.assemblies
-
Represents the state of a design element
- designElementRevision() - Method in interface nxopen.assemblies.Component
-
- DesignElementRevision - Interface in nxopen.pdm
-
Represents the design element revision in the database.
- DesignElementRevision.DesignElementCategory - Class in nxopen.pdm
-
Represents the category for this design element revision.
- DesignElementRevision.TransformData - Class in nxopen.pdm
-
- designElements() - Method in interface nxopen.cae.optimization.TBSBaseDesignVariableBuilder
-
Returns the element group in which the value of the design variable is to be determined
License requirements: None.
- designElements() - Method in interface nxopen.cae.optimization.TBSDesignArea
-
Returns the design elements for optimization
License requirements: None.
- designElementState() - Method in interface nxopen.FileNew
-
Returns the state for the new design element.
- designElementsToCopy() - Method in interface nxopen.assemblies.CopyDesignElementBuilder
-
Returns the design elements to copy
License requirements: None.
- designElementsToOperate() - Method in interface nxopen.assemblies.DesignElementBuilder
-
Returns the design elements to operate upon
License requirements: None.
- designElementsToUpdatePosition() - Method in interface nxopen.assemblies.UpdateDesignElementPositionBuilder
-
Returns the objects for update position
License requirements: None.
- designElementToCompare() - Method in interface nxopen.features.shipdesign.CompareModeBuilder
-
Returns the design element selection object to be processed in the change of mode comparing.
- designElementToGenMfgData() - Method in interface nxopen.features.shipdesign.ManufacturingDataBuilder
-
Returns the design element to genenerate manufacturing data
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- designElementToRebase() - Method in interface nxopen.features.shipdesign.RebaseBuilder
-
Returns the selected design elements to rebase.
- designElementToSetMode() - Method in interface nxopen.features.shipdesign.SetModeBuilder
-
Returns the design element selection object to be processed in the change of mode processing.
- designElementToSynchronizeDesignView() - Method in interface nxopen.features.shipdesign.SynchronizeDesignViewBuilder
-
Returns the design element selection object to be processed in the change of mode processing.
- designElementType() - Method in interface nxopen.assemblies.AddComponentBuilder
-
Returns the type of a add component
License requirements: None.
- designElementType() - Method in interface nxopen.assemblies.DesignElementBuilder
-
Returns the type of a design element
License requirements: None.
- designElementType() - Method in interface nxopen.FileNew
-
Returns the design element type for the new design element.
- DESIGNER_LOGIN - Static variable in class nxopen.tooling.ConcurrentDesignManagementBuilder.Types
-
the designer login page
- designerName() - Method in interface nxopen.tooling.ConcurrentDesignManagementBuilder
-
Returns the designer name.
- DesignFeatureCollection - Interface in nxopen.features
-
Manages design features.
- designFeatureCollection() - Method in interface nxopen.features.FeatureCollection
-
Returns the DesignfeatureCollection instance belonging to this part .
- designFeatureGroup() - Method in interface nxopen.features.shipdesign.DvToMvMappingBuilder
-
Returns the design feature group.
- DesignFeatureRevision - Interface in nxopen.pdm
-
Represents the design feature revision in the database.
- designHours() - Method in interface nxopen.tooling.QuickQuotationBuilder
-
Returns the design hours.
- designLifeCriterion - Variable in class nxopen.uf.UFSf.AskDursolNxData
-
- designLogic - Variable in class nxopen.RuleManager.FunctionInformation
-
TRUE if usable in Design Logic
- designMountHead() - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
Design mount head for insert.
- designNodes() - Method in interface nxopen.cae.optimization.TBSBaseDesignVariableBuilder
-
Returns the node group in which the value of the design variable is to be determined
License requirements: None.
- designOffsetGeometry() - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder
-
Returns the offset design feature geometry
License requirements: None.
- designOption() - Method in interface nxopen.tooling.BurringInsertBuilder
-
Returns the design option to design punch or die.
- designOption() - Method in interface nxopen.tooling.FormingInsertBuilder
-
Returns the design option to design punch or die.
- designPart() - Method in interface nxopen.pdm.DesignElementRevision
-
Returns the part of the underlying design element.
- designPart() - Method in interface nxopen.pdm.DesignSubordinateRevision
-
Returns the underlying loaded part of this subordinate.
- designPositionSpindle() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
Returns the selection list containing spindle line in design position .
- designPrice() - Method in interface nxopen.tooling.QuickQuotationBuilder
-
Returns the work area width.
- designResponse() - Method in interface nxopen.cae.optimization.TBSConstraintBuilder
-
Returns the design response
License requirements: None.
- designResponse() - Method in interface nxopen.cae.optimization.TBSSingleObjective
-
Returns the design response
License requirements: None.
- designRule(CustomManager.DesignRuleReason, NXObject[]) - Method in interface nxopen.routing.CustomManager.DesignRule
-
This defines the prototype for all Routing design rules.
- DesignRule - Interface in nxopen.routing
-
- DesignRuleCollection - Interface in nxopen.routing
-
- DesignRuleManager - Interface in nxopen.routing
-
- designRuleManager() - Method in interface nxopen.Session
-
- DesignRuleOverride - Interface in nxopen.routing
-
Represents Routing DesignRuleOverride object
Creator not available in KF.
- designRules() - Method in interface nxopen.routing.RouteManager
-
RoutingDesignRule collection .
- designRulesViolation() - Method in interface nxopen.routing.RouteManager
-
RoutingDesignRuleViolation collection .
- DesignRuleViolation - Interface in nxopen.routing
-
Represents
DesignRuleViolation
object
Design Rule Violation object is created automatically during design rule check
Created in NX4.0.2
- DesignRuleViolation.BlankOption - Class in nxopen.routing
-
Design Rule Violation Location Object Blank Option
- DesignRuleViolation.ViolationLocationData - Class in nxopen.routing
-
- DesignRuleViolationCollection - Interface in nxopen.routing
-
- DesignRuleViolationCollection.Mode - Class in nxopen.routing
-
Design Rule Mode
- DesignRuleViolationCollection.Reason - Class in nxopen.routing
-
Design Rule reason
- DesignRuleViolationLocation - Interface in nxopen.routing
-
Represents
DesignRuleViolationLocation
object
Design Rule Violation Location object get created automatically during design rule check
Created in NX6.0.0
- designRuleViolationLocation() - Method in interface nxopen.routing.RouteManager
-
RoutingDesignRuleViolationLocation collection .
- DesignRuleViolationLocationCollection - Interface in nxopen.routing
-
- DesignRuleViolationLocationCollection.DeleteOption - Class in nxopen.routing
-
Design Rule Violation Location object delete option
- DesignRuleViolationViewer - Interface in nxopen.routing
-
This class can be used to set the violation id, update text for overridding the violation and
update the user name used to override the violation.
- DesignRuleViolationViewer.FilterOption - Class in nxopen.routing
-
Enumerations to show options for filter.
- DesignRuleViolationViewer.OverrideOption - Class in nxopen.routing
-
Enumerations to show options for override
- designSequence() - Method in interface nxopen.tooling.DirectUnfoldBuilder
-
Returns the design sequence.
- designSequence() - Method in interface nxopen.tooling.IntermediateStageBuilder
-
Returns the design sequence.
- designStatus() - Method in interface nxopen.die.CastReliefParentBuilder
-
Returns the design status of cast relief, if true the cast relief will be built into the model, if false it will not.
- designStatus() - Method in interface nxopen.die.ConnectProfileParentBuilder
-
Returns the design status of die connecting profiles
License requirements: ug_die_design ("Die Design")
.
- designStatus() - Method in interface nxopen.die.DeckParentBuilder
-
Returns the design status of deck, if true the deck will be built into the model, if false it will not.
- designStatus() - Method in interface nxopen.die.DrawDiePunchSectionBuilder
-
Returns the design status of the draw die punch casting, if true the casting will be built into the model, if false it will not.
- designStatus() - Method in interface nxopen.die.FlangeSteelRibChildBuilder
-
Returns the design status of the Flange Steel Rib
License requirements: ug_die_design ("Die Design")
.
- designStatus() - Method in interface nxopen.die.FlangeSteelRibParentBuilder
-
Returns the design status of the Flange Steel Ribs
License requirements: ug_die_design ("Die Design")
.
- designStatus() - Method in interface nxopen.die.HandlingCoreChildBuilder
-
Returns the design status of the handling core, if true the handling core will be built into the model, if false it will not.
- designStatus() - Method in interface nxopen.die.HandlingCoreParentBuilder
-
Returns the design status of handling cores, if true the handling cores will be built into the model, if false they will not.
- designStatus() - Method in interface nxopen.die.HoleChildBuilder
-
Returns the design status of the die hole, if true the hole will be built into the model, if false it will not.
- designStatus() - Method in interface nxopen.die.HoleParentBuilder
-
Returns the design status of die holes, if true the holes will be built into the model, if false they will not.
- designStatus() - Method in interface nxopen.die.KeywayChildBuilder
-
Returns the design status of the keyway, if true the keyway will be built into the model, if false it will not.
- designStatus() - Method in interface nxopen.die.KeywayParentBuilder
-
Returns the design status of keyways, if true the keyways will be built into the model, if false they will not.
- designStatus() - Method in interface nxopen.die.PadChildBuilder
-
Returns the design status of the die pad, if true the pad will be built into the model, if false it will not.
- designStatus() - Method in interface nxopen.die.PadParentBuilder
-
Returns the design status of die pads, if true the pads will be built into the model, if false they will not.
- designStatus() - Method in interface nxopen.die.PierceHoleChildBuilder
-
Returns the design status of the pierce hole
License requirements: ug_die_design ("Die Design")
.
- designStatus() - Method in interface nxopen.die.PierceHoleParentBuilder
-
Returns the design status of pierce holes
License requirements: ug_die_design ("Die Design")
.
- designStatus() - Method in interface nxopen.die.PointChildBuilder
-
Returns the design status of the point, if true the point will be built into the model, if false it will not.
- designStatus() - Method in interface nxopen.die.PointParentBuilder
-
Returns the design status of points, if true the points will be built into the model, if false they will not.
- designStatus() - Method in interface nxopen.die.PressureSystemChildBuilder
-
Returns the design status of the pressure system, if true the pressure system will be built into the model, if false it will not.
- designStatus() - Method in interface nxopen.die.PressureSystemParentBuilder
-
Returns the design status of pressure systems, if true the pressure systems will be built into the model, if false they will not.
- designStatus() - Method in interface nxopen.die.RibChildBuilder
-
Returns the design status of the die rib, if true the rib will be built into the model, if false it will not.
- designStatus() - Method in interface nxopen.die.RibParentBuilder
-
Returns the design status of die ribs, if true the ribs will be built into the model, if false they will not.
- designStatus() - Method in interface nxopen.die.RotorSectionBuilder
-
Returns the design status of the die rotor casting
License requirements: ug_die_design ("Die Design")
.
- designStatus() - Method in interface nxopen.die.SteelInsertSegmentChildBuilder
-
Returns the design status of die sisegs
License requirements: ug_die_design ("Die Design")
.
- designStatus() - Method in interface nxopen.die.SteelInsertSegmentParentBuilder
-
Returns the design status of die sisegs
License requirements: ug_die_design ("Die Design")
.
- designStatus() - Method in interface nxopen.die.ThroatChildBuilder
-
Returns the design status of the throat section, if true the throat section will be built into the model, if false it will not.
- designStatus() - Method in interface nxopen.die.ThroatParentBuilder
-
Returns the design status of the throat sections, if true the throat sections will be built into the model, if false they will not.
- designStatus() - Method in interface nxopen.die.WearPlateLocChildBuilder
-
Returns the design status of wear plate and locators
License requirements: ug_die_design ("Die Design")
.
- designStatus() - Method in interface nxopen.die.WearPlateLocParentBuilder
-
Returns the design status of wear plate and locators
License requirements: ug_die_design ("Die Design")
.
- designStudy() - Method in interface nxopen.BasePart
-
Returns the design study instance belonging to this part .
- DesignStudyAttributeBuilder - Interface in nxopen.optimization
-
- DesignStudyBuilder - Interface in nxopen.optimization
-
- DesignStudyBuilder.DesignStudyAttributeType - Class in nxopen.optimization
-
Attribute type
- DesignStudyBuilder.DesignStudyConstraintLimitType - Class in nxopen.optimization
-
Constraint limit type
- DesignStudyBuilder.DesignStudyDistributeType - Class in nxopen.optimization
-
Distribution type
- DesignStudyBuilder.DesignStudyObjective - Class in nxopen.optimization
-
Defined Objective Structure
- DesignStudyBuilder.DesignStudyVariable - Class in nxopen.optimization
-
Defined variable structure
- DesignStudyCollection - Interface in nxopen.optimization
-
- DesignStudyObjective() - Constructor for class nxopen.optimization.DesignStudyBuilder.DesignStudyObjective
-
- DesignStudyObjective(String, NXObject, DesignStudyBuilder.DesignStudyAttributeType, double, double, double, double) - Constructor for class nxopen.optimization.DesignStudyBuilder.DesignStudyObjective
-
Constructor for the DesignStudyObjective object.
- DesignStudyVariable() - Constructor for class nxopen.optimization.DesignStudyBuilder.DesignStudyVariable
-
- DesignStudyVariable(String, NXObject, DesignStudyBuilder.DesignStudyAttributeType, double, double, DesignStudyBuilder.DesignStudyDistributeType, double, double, double, int) - Constructor for class nxopen.optimization.DesignStudyBuilder.DesignStudyVariable
-
Constructor for the DesignStudyVariable object.
- designSubordinateRevision() - Method in interface nxopen.assemblies.Component
-
- DesignSubordinateRevision - Interface in nxopen.pdm
-
Represents the design subordinate revision in the database.
- designTasks() - Method in interface nxopen.tooling.ConcurrentDesignManagementBuilder
-
Returns the designer names.
- designTool() - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
Returns the design tool.
- designToolOpt() - Method in interface nxopen.tooling.DieBaseBuilder
-
Returns the design tool options.
- DesignTrimToolBuilder - Interface in nxopen.tooling
-
Represents a builder to be used to create Mold Wizard design trim tool.
- DesignTrimToolCollection - Interface in nxopen.tooling
-
Creates a DesignTrimToolCollection class
To obtain an instance of this class, refer to
ToolingManager
Created in NX7.5.0
- designTrimTools() - Method in interface nxopen.tooling.ToolingManager
-
Returns the DesignTrimToolCollection instance belonging to this part .
- designVariable() - Method in interface nxopen.cae.optimization.DAOSolution
-
Returns the optimization design variable collection.
- designVariables() - Method in interface nxopen.cae.ModelUpdateSolution
-
The design variables collection for this meta solution.
- designVariables() - Method in interface nxopen.cae.optimization.TBSOptimizationSolution
-
Represents the design variable collection belonging to this optimization solution .
- designVariableType() - Method in interface nxopen.cae.ModelUpdateDesignVariablesRapidCreateBuilder
-
Returns the design variable type
License requirements: None.
- designVarLinearRange() - Method in interface nxopen.cae.ModelUpdateOptimOptionsBuilder
-
Returns the design variable linear range
License requirements: None.
- designVarWeight() - Method in interface nxopen.cae.ModelUpdateOptimOptionsBuilder
-
Returns the design variable weight
License requirements: None.
- DESKTOP - Static variable in class nxopen.MovieSettingsBuilder.CaptureAreaChoices
-
Specifies that the Desktop contents are to be recorded
- destEnum() - Method in interface nxopen.formboard.FaceAnnotationBuilder
-
- destForUnselectedLayer() - Method in interface nxopen.DxfdwgImporter
-
Returns the DestForUnselectedLayer command - number of destination layer
License requirements: None.
- destination() - Method in interface nxopen.ame.SaveToLibraryBuilder
-
Returns the destination directory path contains public query
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- destination() - Method in interface nxopen.mechatronics.PositionControlBuilder
-
Returns the destination.
- destination() - Method in interface nxopen.weld.SurfaceWeldBuilder
-
Returns the option specifying the destination for this surface weld feature.
- destination() - Method in interface nxopen.weld.WeldJointBuilder
-
Returns the destination to create new joints
License requirements: None.
- destinationCollector() - Method in interface nxopen.cae.ElementTypeBuilder
-
Returns the destination element collector
License requirements: nx_masterfem ("Finite Element Modeling")
.
- DestinationCollectorBuilder - Interface in nxopen.cae
-
Represents a Element Collector Container (Ecc) selection
.
- destinationCoordinateSystem() - Method in interface nxopen.features.FlatteningAndFormingBuilderEx
-
Returns the coordinate system
License requirements: None.
- destinationCoordinateSystem() - Method in interface nxopen.PartImporter
-
Returns the destination coordinate system.
- destinationCoordinateSystemSpecification() - Method in interface nxopen.PartImporter
-
Returns the destination coordinate system specification.
- destinationCsys() - Method in interface nxopen.features.OptimizeCurveBuilder
-
Returns the destination csys as global axis.
- destinationFilename() - Method in interface nxopen.gateway.CopyCutBuilder
-
Returns the string of the filename to which to copy or cut the objects to
License requirements: None.
- destinationFolder() - Method in interface nxopen.cae.AutoBCBuilder
-
Returns the destination folder of
SimBC
object
License requirements: None.
- destinationFolder() - Method in interface nxopen.cae.SimBCBuilder
-
Returns the destination folder of
SimBC
object
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
Created in NX9.0.0
- destinationFolder() - Method in interface nxopen.pdm.ExportWorksetForReferenceBuilder
-
Returns the export directory path
License requirements: None.
- destinationFolder() - Method in interface nxopen.tooling.EjectorTableBuilder
-
Returns the destination folder which the master model part will be created in.
- DestinationFrameData() - Constructor for class nxopen.features.FlatteningAndFormingBuilder.DestinationFrameData
-
- destinationModule() - Method in interface nxopen.geometricutilities.NestModuleBuilder
-
- destinationNames - Variable in class nxopen.InterpartExpressionsBuilder.ExpressionsData
-
array of destination names
- destinationObjects() - Method in interface nxopen.facet.BestFitAlignBuilder
-
Returns the destination objects
License requirements: None.
- destinationOpt() - Method in interface nxopen.PasteSpecialBuilder
-
Returns the destination coordinate system option
License requirements: None.
- destinationPart() - Method in interface nxopen.drawings.ViewCopyTo3dBuilder
-
Returns the path to the destination part
License requirements: nx_layout ("NX Layout")
.
- destinationPath() - Method in interface nxopen.layout2d.PublishComponentBuilder
-
Returns the path of folder to publish into
License requirements: None.
- destinationPcsEnum() - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder
-
Returns the destination part coordinate system type
License requirements: None.
- destinationPoint() - Method in interface nxopen.PartImporter
-
Returns the destination point.
- destinationPoint() - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
Returns the destination point for the copy operation.
- destinationPoint() - Method in interface nxopen.tooling.InsertEditToolsBuilder
-
Returns the destination point
License requirements: None.
- destinationPosition() - Method in interface nxopen.display.LightBuilder
-
Returns the destination position - only applicable to spot light types
License requirements: None.
- destinationTeamcenterFolder() - Method in interface nxopen.visualreporting.VisualReport
-
Returns the destination Teamcenter folder for saving the
VisualReport
to Teamcenter database.
- destinationTeamcenterFolder() - Method in interface nxopen.visualreporting.VisualReportBuilder
-
Returns the destination Teamcenter folder for saving the
VisualReport
being built by this
builder to Teamcenter database.
- destinationView() - Method in interface nxopen.drafting.CutCopyPasteBuilder
-
Returns the destination view.
- destinationView() - Method in interface nxopen.drafting.CutCopyPasteLeaderBuilder
-
Returns the destination view.
- destPropertyId() - Method in interface nxopen.mechatronics.RuntimeFormulaBuilder
-
Returns the dest property id
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- destroy() - Method in interface nxopen.Builder
-
Deletes the builder, and cleans up any objects created by the builder.
- destroy(boolean) - Method in interface nxopen.cae.CorrelSolution
-
Deletes a correlation solution
License requirements: nx_correl_base ("FE Correlation")
.
- destroy(boolean) - Method in interface nxopen.cae.optimization.TBSOptimizationSolution
-
Deletes an optimization solution and the associated result file optional
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
- destroy(boolean) - Method in interface nxopen.cae.optimization.TBSSmooth
-
Deletes a smooth and the associated result file optional
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
- destroy() - Method in interface nxopen.cae.PostScenarioSelectionParameters
-
- destroy() - Method in interface nxopen.cae.responsesimulation.EvaluationSetting
-
Destroies the evaluation setting object after evaluation.
- destroy() - Method in interface nxopen.cae.responsesimulation.Excitation
-
Deletes a response simulation excitation
License requirements: nx_response_anlys ("NX Response Analysis")
.
- destroy(boolean) - Method in interface nxopen.cae.responsesimulation.RSEvent
-
Deletes a response simulation dynamic event, including all excitations
under it
License requirements: nx_response_anlys ("NX Response Analysis")
.
- destroy(boolean) - Method in interface nxopen.cae.responsesimulation.Solution
-
Deletes a response simulation solution, including all events and excitations
under it
License requirements: nx_response_anlys ("NX Response Analysis")
.
- destroy() - Method in interface nxopen.cae.SimBCBuilder
-
Deletes the builder, and cleans up any objects created by the builder.
- destroy() - Method in interface nxopen.cae.ViewportSynchronizationOptions
-
- destroy() - Method in interface nxopen.ConvergentFacet
-
Deletes a convergent facet object.
- destroy() - Method in interface nxopen.FacetCollector
-
Destroy the FacetCollector object
License requirements: gateway ("UG GATEWAY")
.
- destroy() - Method in interface nxopen.features.EditWithRollbackManager
-
Delete the Edit With Rollback Manager
License requirements: None.
- destroy() - Method in interface nxopen.geometricutilities.BlendStopshortBuilder
-
Destructor for
BlendStopshortBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX5.0.0
- destroy(FacePlaneSelectionBuilder) - Method in interface nxopen.geometricutilities.FacePlaneSelectionBuilderCollection
-
Destroys an FacePlaneSelectionBuilder.
- destroy() - Method in interface nxopen.geometricutilities.SecondarySectionData
-
Delete the secondary section object.
- destroy() - Method in interface nxopen.geometricutilities.WaveLinkRepository
-
Destroy the link repository
License requirements: None.
- destroy() - Method in interface nxopen.ITableEditorDataProvider
-
Deletes the data provider.
- destroy() - Method in interface nxopen.positioning.MatingConverter
-
- destroy() - Method in interface nxopen.ScCollector
-
Destroy the ScCollector object
License requirements: None.
- destroy() - Method in interface nxopen.Section
-
Destroy the section object
License requirements: gateway ("UG GATEWAY")
.
- destroy() - Method in interface nxopen.SketchEvaluator
-
Deletes the sketch evaluator, and cleans up any objects created by the it
License requirements: None.
- destroyAllPreviewObjects() - Method in interface nxopen.routing.TransformPathBuilder
-
Destroys all preview objects associated with this operation.
- destroyMemory() - Method in interface nxopen.tooling.EdgePatchBuilder
-
Destroy the builder memory.
- destroyOwnedFacets() - Method in interface nxopen.Face
-
Destroys all
IFacet
objects owned by this face.
- destroyOwnedFacets() - Method in interface nxopen.facet.FacetedBody
-
Destroys all
IFacet
objects owned by this body.
- destroyPath(NXObject[]) - Method in interface nxopen.features.shipdesign.StiffenerBuilder
-
Destroy the path curves
License requirements: nx_ship_detail ("Ship Detail Design")
.
- destroyPlane() - Method in interface nxopen.Plane
-
Destroy the plane object
License requirements: None.
- destroyReusableBuilder() - Method in interface nxopen.tooling.AddReusablePart
-
Destroys reusable builder data
License requirements: None.
- destroySplitScreenLayoutAndNamedViews(Layout) - Method in interface nxopen.LayoutCollection
-
This method destroys the split screen layout along with the views
that are there in it
License requirements: None.
- destruct(StylerEvent) - Method in interface nxopen.uistyler.DialogItem.Destruct
-
Called when the dialog closes.
- DESTRUCT_REASON - Static variable in class nxopen.uistyler.StylerEvent.Reason
-
Destruct reason
- destructor() - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
Destructs solver to release the data.
- DETACH_SELECTED_OBJECTS - Static variable in class nxopen.mechanicalrouting.MovePathBuilder.DetachTypes
-
- detachActiveRcp() - Method in interface nxopen.routing.EditLineSegmentBuilder
-
Detaches the line segment, stored in builder, at its active end RCP.
- detachAllConnections() - Method in interface nxopen.pid.EquipmentBuilder
-
Detaches the equipment from all attached connections.
- detachAttributeGroup(IAttributeGroupOwner) - Method in interface nxopen.pdm.AttributeGroup
-
Detaches Attribute Group
License requirements: None.
- detachLoadRecipe() - Method in interface nxopen.cae.SimSolution
-
Detach the Load Recipe from this Solution deleting all steps and loads created from the Load Recipe
License requirements: nx_masterfem ("Finite Element Modeling")
.
- detachmentNodes() - Method in interface nxopen.cae.ElementDetachBuilder
-
Returns the nodes which will take part in detachment
License requirements: None.
- detachNodeOption() - Method in interface nxopen.cae.ElementDetachBuilder
-
Returns the option which indicates whether all detachment nodes are to be selected.
- detachNoteFromView(Tag) - Method in interface nxopen.uf.UFDraw
-
- detachPoint(int) - Method in interface nxopen.routing.SplinePathBuilder
-
Detaches the point at the selected index from all objects its attached to using a Touch
constraint.
- detachSelectedPath() - Method in interface nxopen.routing.TransformPathBuilder
-
Detaches the selected path ends from the connected routing segments.
- detachType() - Method in interface nxopen.mechanicalrouting.MovePathBuilder
-
Returns the detach type setting.
- detail() - Method in interface nxopen.preferences.ViewPreferences
-
Returns object for doing View Preferences settings applicable to Detail .
- detail - Variable in class nxopen.uf.UFView.LightAttributes
-
- DETAIL_COARSE - Static variable in class nxopen.uf.UFView.LightDetail
-
- DETAIL_DESIGN - Static variable in class nxopen.features.shipdesign.ConceptFromSpreadsheetBuilder.Type
-
- DETAIL_DESIGN - Static variable in class nxopen.features.shipdesign.SectionDrawingBuilder.ViewTypeOptions
-
the view is created on detail design
- DETAIL_DESIGN - Static variable in class nxopen.features.shipdesign.StiffenerBySupportPathBuilder.Scenario
-
Detail Design Scenario
- DETAIL_EXTRA_FINE - Static variable in class nxopen.uf.UFView.LightDetail
-
- DETAIL_FINE - Static variable in class nxopen.uf.UFView.LightDetail
-
- DETAIL_RAY_TRACED - Static variable in class nxopen.uf.UFView.LightDetail
-
- DETAIL_STANDARD - Static variable in class nxopen.uf.UFView.LightDetail
-
- DETAIL_SUBTYPE - Static variable in class nxopen.uf.UFView.Subtype
-
- DETAIL_VIEW - Static variable in class nxopen.drawings.DraftingViewCollection.ViewCopyDetailOption
-
detail view
- DetailBoundaryOption - Class in nxopen.preferences
-
Represents the boundary options
- detailComponents() - Method in interface nxopen.features.shipdesign.MoveToContainerBuilder
-
Returns the components to move to the ship container
License requirements: None.
- DetailData() - Constructor for class nxopen.sim.IsvControlPanelBuilder.DetailData
-
- DETAILED - Static variable in class nxopen.cae.NodeElementInfoBuilder.PropertyType
-
detailed property
- DETAILED - Static variable in class nxopen.cae.Post.Legend
-
- DETAILED - Static variable in class nxopen.features.vehicledesign.CloseRangeDemoCylinderListItemBuilder.ValidateTypes
-
Detailed type
- DETAILED - Static variable in class nxopen.motion.TirePropertyTnoBuilder.IswitchDefinitionType
-
- DETAILED - Static variable in class nxopen.preferences.SessionDrafting.AnnotationStyleType
-
- DETAILED - Static variable in class nxopen.routing.StockStyle
-
Detailed profile.
- DETAILED_SOLID - Static variable in class nxopen.routing.StockBuilder.StockStyleType
-
Detailed Solid
- DETAILED_SOLID - Static variable in class nxopen.routing.StockStyleBuilder.StockStyle
-
- detailedOutput() - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
Returns the detailed output display
License requirements: None.
- detailedusageinfo - Variable in class nxopen.geometricutilities.EntityUsageInfo.DependentFeaturesData
-
detailed usage information for each dependent feature
- detailedusageinfo - Variable in class nxopen.geometricutilities.EntityUsageInfo.OtherDependentsData
-
detailed usage information for each dependent object
- detailID() - Method in interface nxopen.drafting.DrawingCreationWizardBuilder
-
Returns the detail id.
- detailLevel() - Method in interface nxopen.annotations.BillOfMaterialBuilder
-
Returns the value that specifies the detail level type.
- detailLevel() - Method in interface nxopen.sim.KinematicSinumerikCaBuilder
-
Returns the detail level for this protection area
License requirements: None.
- DETAILS - Static variable in class nxopen.sim.SimDebugBuilder.DumpType
-
Dump Details
- DETAILS - Static variable in class nxopen.sim.SimDebugBuilder.TraceType
-
Trace Details
- DetailView - Interface in nxopen.drawings
-
Represents a Detail View.
- DetailViewBuilder - Interface in nxopen.drawings
-
- DetailViewBuilder.LabelOnParentType - Class in nxopen.drawings
-
the display type for the label on parent
- DetailViewBuilder.Types - Class in nxopen.drawings
-
the type of boundary
- DetailViewPreferences - Interface in nxopen.preferences
-
Represents set of Detail View Preferences applicable to drafting views.
- detectAirCuttingTime() - Method in interface nxopen.cam.SimulationOptionsBuilder
-
Returns the option to detect the material/air cuts during the cutting time
License requirements: None.
- detectFeatureEdges() - Method in interface nxopen.cae.FluidDomainBuilder
-
Returns the detect feature edges will generate bodies and meshes that are more conformant to
the input boundaries around the detected edges
License requirements: None.
- detectObsoleteSettings(boolean) - Method in interface nxopen.assemblies.ClearanceSet
-
Detects whether a clearance set was defined with settings which are obsolete/no longer supported.
- DetectPrimitivesBuilder - Interface in nxopen.facet
-
This class manages the primitive shape detection for a facet body.
- detectRibs() - Method in interface nxopen.cae.RemoveRibsBuilder
-
Run rib detection.
- detectRunSpools() - Method in interface nxopen.routing.Run
-
This will detect spools in a run
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- DETERMINANT - Static variable in class nxopen.cae.Result.Component
-
- determinant(double[]) - Method in interface nxopen.uf.UFMtx2
-
- determinant(double[]) - Method in interface nxopen.uf.UFMtx3
-
- DETERMINE_BY_EXPRESSION - Static variable in class nxopen.ame.ExtractAttributeBuilder.Type
-
- DETERMINE_BY_EXPRESSION - Static variable in class nxopen.ame.ReferenceObjectBuilder.SourceSelectionType
-
- determineDiscrepancies() - Method in interface nxopen.formboard.UpdateFormboardBuilder
-
Once the mapping has been determined, this method can find any discrepancies
between the 3D harness and the formboard.
- devchkAdjacentEdges(int, Tag[], double, int) - Method in interface nxopen.uf.UFModeling
-
- DevchkAdjacentEdgesData() - Constructor for class nxopen.uf.UFModeling.DevchkAdjacentEdgesData
-
- DevchkEeInfo() - Constructor for class nxopen.uf.UFModl.DevchkEeInfo
-
- DevchkEeInfo(int, Tag, double[], double[], Tag, double[], double[], double, double) - Constructor for class nxopen.uf.UFModl.DevchkEeInfo
-
- DEVELOPABLE - Static variable in class nxopen.geometricutilities.AlignmentMethodBuilder.Type
-
- deviateFromStandard() - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder
-
Returns the indication if the target values are deviated from standard.
- deviation() - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder
-
Returns the deviation
License requirements: None.
- DEVIATION - Static variable in class nxopen.cae.optimization.TBSBaseDesignVariableBuilder.GroupOperator
-
Deviation from the maximum value of the reference value
- deviation - Variable in class nxopen.uf.UFGdt.LimitsAndFitsData
-
- deviation - Variable in class nxopen.uf.UFGdt.ThreadData
-
- deviationalTolerance() - Method in interface nxopen.features.sheetmetal.ExportFlatPatternBuilder
-
Returns the deviational tolerance
License requirements: None.
- DeviationChecking - Interface in nxopen.geometricanalysis
-
- DeviationChecking.DeviationOptions - Class in nxopen.geometricanalysis
-
the deviation type to be shown
- DeviationChecking.Types - Class in nxopen.geometricanalysis
-
the type of deviation checking to be performed
- DeviationGauge - Interface in nxopen.geometricanalysis
-
Deviation Gauge analysis object class
To create or edit an instance of this class, use
DeviationGaugeBuilder
Created in NX6.0.0
- DeviationGaugeBuilder - Interface in nxopen.geometricanalysis
-
- DeviationGaugeBuilder.AdditionalValuesLabelType - Class in nxopen.geometricanalysis
-
This enum represents the Deviation Gauge Analysis Object additional values label type
- DeviationGaugeBuilder.ColorPlotTypes - Class in nxopen.geometricanalysis
-
This enum represents the Deviation Gauge Analysis Object color plot types
- DeviationGaugeBuilder.MeasurementMethodType - Class in nxopen.geometricanalysis
-
This enum represents the Deviation Gauge Analysis Object evaluation types
- DeviationGaugeBuilder.MinMaxType - Class in nxopen.geometricanalysis
-
This enum represents the Deviation Gauge Analysis Object min max type
- DeviationGaugeBuilder.ReportingPerTypes - Class in nxopen.geometricanalysis
-
This enum represents the Deviation Gauge Analysis Object reporting per setting
- DeviationGaugeBuilder.XyzDirectionType - Class in nxopen.geometricanalysis
-
This enum represents the Deviation Gauge Analysis Object X, Y, Z direction options
- deviationIntervals() - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder
-
Returns the number of deviation intervals
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- deviationOption() - Method in interface nxopen.geometricanalysis.DeviationChecking
-
Returns the number or type of deviations to be shown for the deviation checking
License requirements: None.
- DEVICE - Static variable in class nxopen.cam.InspectionCmmCommandBuilder.CommandTypes
-
Enter a statement defining a device statement
- DEVICE - Static variable in class nxopen.formboard.UpdateDiscrepancy.ObjectType
-
ConnectorDevice object which
has a type of device.
- device() - Method in interface nxopen.ListingWindow
-
Returns the device type for the window.
- DEVICE - Static variable in class nxopen.routing.electrical.ConnectorDevice.ComponentType
-
- DEVICE - Static variable in class nxopen.routing.RouteManager.FindObjectType
-
- DEVICE - Static variable in class nxopen.routing.RouteManager.PartType
-
- device() - Method in interface nxopen.sim.KinematicChain
-
Returns the device component of the kinematic chain
License requirements: None.
- DeviceAndViewIndexData() - Constructor for class nxopen.cae.xyplot.Plot.DeviceAndViewIndexData
-
- DeviceFunctionDef - Interface in nxopen.ame
-
Device Function Def class
This object does not need a creator.
- deviceId() - Method in interface nxopen.sim.KinematicComponentBuilder
-
Returns the device id
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- deviceIndex() - Method in interface nxopen.cae.xyplot.BasePlotParameters
-
Returns the index of device on which plot graph will be shown.
- deviceName() - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
Returns the device name
License requirements: None.
- DeviceRelationship - Interface in nxopen.routing
-
- DeviceRelationship.RelationType - Class in nxopen.routing
-
Specifies the nature of the relationship between the related and relating objects.
- deviceType() - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
Returns the device type
License requirements: None.
- devLength() - Method in interface nxopen.tooling.DirectUnfoldBuilder
-
- devs - Variable in class nxopen.uf.UFModeling.DevchkAdjacentEdgesData
-
- devTolPlaces() - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
Returns the deviation and tolerance decimal places
License requirements: None.
- devType - Variable in class nxopen.uf.UFModl.DevchkEeInfo
-
- DexBuilder - Interface in nxopen
-
This is an abstract class that provides the basic functionality common to all dex builders.
- DexManager - Interface in nxopen
-
The DexManager class provides methods to create Dex Builder objects.
- dexManager() - Method in interface nxopen.Session
-
Returns the
DexManager
belonging to this session
Created in NX3.0.0
- DF - Static variable in class nxopen.weld.ExportWeldBuilder.AttributeOriginType
-
- DF - Static variable in class nxopen.weld.InformationBuilder.AttributeOriginType
-
- DfoConstraint() - Constructor for class nxopen.uf.UFModl.DfoConstraint
-
- DfoConstraint(UFModl.DfoConstraintType, Tag, Tag, Tag, String) - Constructor for class nxopen.uf.UFModl.DfoConstraint
-
- DfoRegion() - Constructor for class nxopen.uf.UFModl.DfoRegion
-
- DfoRegion(Tag[], int, Tag[], int, Tag[], int) - Constructor for class nxopen.uf.UFModl.DfoRegion
-
- DGML_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- DGML_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- dheight - Variable in class nxopen.mfg.am.BuildTray.DimensionsData
-
- DI - Static variable in class nxopen.ame.MemorySectionType
-
- DIA - Static variable in class nxopen.annotations.DiameterSymbol
-
Specifies DIA symbol
- DIA - Static variable in class nxopen.annotations.SearchCriteriaDimensionBuilder.DiameterSymbolOptions
-
- DIA_RAD_ABOVE - Static variable in class nxopen.uf.UFDrf.DiameterRadiusPlacement
-
- DIA_RAD_AFTER - Static variable in class nxopen.uf.UFDrf.DiameterRadiusPlacement
-
- DIA_RAD_BEFORE - Static variable in class nxopen.uf.UFDrf.DiameterRadiusPlacement
-
- DIA_RAD_BELOW - Static variable in class nxopen.uf.UFDrf.DiameterRadiusPlacement
-
- DIA_RAD_OMIT - Static variable in class nxopen.uf.UFDrf.DiameterRadiusPlacement
-
- DIAGONAL_POINTS - Static variable in class nxopen.cam.DmRotaryFloorFinishBuilder.DmSurfCutAreaType
-
Diagonal Points
- DIAGONAL_POINTS - Static variable in class nxopen.cam.DmSurfBuilder.DmSurfCutAreaType
-
Diagonal Points
- DIAGONAL_POINTS - Static variable in class nxopen.features.BlockFeatureBuilder.Types
-
Represents the block created by providing Diagonal Points
- DIAGONAL_POINTS - Static variable in class nxopen.features.PointSetBuilder.PatternLimitsType
-
The pattern limit is defined by two points.
- DiagonalPointsData() - Constructor for class nxopen.cae.BoxBoundingVolume.DiagonalPointsData
-
- DiagramDisplayStyles - Interface in nxopen.cae.xyplot
-
Manages the diagram display styles.
- diagramDisplayStyles() - Method in interface nxopen.cae.xyplot.PlotGraphTemplate
-
Returns the diagram display styles.
- DiagramDisplayStyles2D - Interface in nxopen.cae.xyplot
-
Manages the display styles for 2D diagram.
- DiagramDisplayStyles2DBarChart - Interface in nxopen.cae.xyplot
-
Manages the 2D bar chart diagram display styles.
- DiagramManager - Interface in nxopen.ame
-
Represents an object that manages sheet elements.
- DiagramManagerFactory - Class in nxopen.ame
-
- DiagramManagerFactory() - Constructor for class nxopen.ame.DiagramManagerFactory
-
- DIAGRAMMING_SHEETPART - Static variable in class nxopen.FileNewTemplateType
-
Specifies a diagramming sheet part template
- DiagrammingAlignment - Class in nxopen.diagramming
-
Represents the alignment.
- DiagrammingAnnotationboundarytype - Class in nxopen.diagramming
-
Represents the boundary type of annotation.
- DiagrammingArrowtype - Class in nxopen.diagramming
-
Represents the arrow type.
- DiagrammingConnectionlabelhorizontaloffsetposition - Class in nxopen.diagramming
-
Represents the horizontal connection label offset position.
- DiagrammingConnectionlabelposition - Class in nxopen.diagramming
-
Represents the connection label position.
- DiagrammingConnectionlabelverticaloffsetposition - Class in nxopen.diagramming
-
Represents the vertical connection label offset position.
- DiagrammingFlowdirectionarrowstyle - Class in nxopen.diagramming
-
Represents the flow direction arrow style.
- DiagrammingJumperprioritytype - Class in nxopen.diagramming
-
Represents the jumper priority.
- DiagrammingJumpertype - Class in nxopen.diagramming
-
Represents the jumper type.
- DiagrammingLocationstyle - Class in nxopen.diagramming
-
Represents the location style.
- DiagrammingManager - Interface in nxopen.diagramming
-
A manager to deal with all objects.
- diagrammingManager() - Method in interface nxopen.Part
-
Returns the DiagrammingManager instance belonging to this part .
- DiagrammingRepeatstartposition - Class in nxopen.diagramming
-
Represents the repeat start position.
- DiagrammingSizingpolicy - Class in nxopen.diagramming
-
Represents the sizing policy type.
- DiagrammingStubsides - Class in nxopen.diagramming
-
Represents the stub side type.
- DIALOG - Static variable in class nxopen.uistyler.Attachment.AttachType
-
Dialog type
- Dialog - Interface in nxopen.uistyler
-
Represents a DialogItem for UI Styler.
- DIALOG - Static variable in class nxopen.uistyler.StylerItem.ItemType
-
Dialog item
- Dialog.ItemType - Class in nxopen.uistyler
-
Represents dialog item type
- DIALOG_DIR_COUNT - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- DIALOG_FILTER_COUNT - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- DIALOG_ITEM - Static variable in class nxopen.uistyler.Dialog.ItemType
-
- dialogBarDecimalPlaces() - Method in interface nxopen.preferences.SessionUserInterfaceUI
-
Returns the dialog box decimal places
License requirements: None.
- dialogBarTracking() - Method in interface nxopen.preferences.SessionUserInterfaceUI
-
Returns the dialog bar tracking flag
License requirements: None.
- dialogBoxDecimalPlaces() - Method in interface nxopen.preferences.PartUserInterface
-
Returns the dialog box decimal places
License requirements: None.
- DialogCustomizationData() - Constructor for class nxopen.cam.CAMSession.DialogCustomizationData
-
- DialogIndex - Class in nxopen.uistyler
-
Represents indexes
- DialogItem - Interface in nxopen.uistyler
-
Represents a DialogItem for UI Styler.
- DialogItem.Apply - Interface in nxopen.uistyler
-
Called when a dialog user clicks Apply or <Ctrl>MB2 anywhere in NX or presses the Apply's
keyboard accelerator as defined in the resource file.
- DialogItem.Back - Interface in nxopen.uistyler
-
Called when a dialog user clicks Back <Shift>MB2 anywhere in NX or presses Back's keyboard accelerator
as defined in the resource file.
- DialogItem.Cancel - Interface in nxopen.uistyler
-
Called when a dialog user clicks Cancel or <Alt>MB2 anywhere in NX or presses Cancel's keyboard accelerator
as defined in the resource file.Cancel callbacks should terminate the dialog and always return UF_UI_CB_EXIT_DIALOG.
- DialogItem.Construct - Interface in nxopen.uistyler
-
Called when the dialog displays.
- DialogItem.Destruct - Interface in nxopen.uistyler
-
Called when the dialog closes.
- DialogItem.DialogItemIndex - Class in nxopen.uistyler
-
Describes dialog item index
- DialogItem.FileOperation - Interface in nxopen.uistyler
-
Called just before a dialog user selects a file operation, such as in File?
- DialogItem.Okay - Interface in nxopen.uistyler
-
Called when a dialog user clicks OK or MB2 anywhere in NX or presses the OK's keyboard accelerator
as defined in the resource file.
- DialogItem.PageSwitch - Interface in nxopen.uistyler
-
Called when a user switches tabs.
- dialogOption() - Method in interface nxopen.tooling.ReusePositioningObjectBuilder
-
Returns the dialog option type that is from toolbar or others
License requirements: None.
- DialogResponse - Class in nxopen.uistyler
-
Represents dialog response
- dialogSetItem(UFVariant, String, String) - Method in interface nxopen.uf.UFSim
-
- dialogShown() - Method in interface nxopen.blockstyler.BlockDialog.DialogShown
-
Dialog Shown callback
License requirements: None.
- dialogSizing() - Method in interface nxopen.blockstyler.CompositeBlock
-
Returns the Dialog Sizing
License requirements: None.
- dialogSizingAsString() - Method in interface nxopen.blockstyler.CompositeBlock
-
Returns the Dialog Sizing as string
License requirements: None.
- DialogState - Class in nxopen.uistyler
-
Represents the dialog state
- dialogType() - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder
-
Returns the dialog type
License requirements: None.
- dialogViolationId() - Method in interface nxopen.routing.DesignRuleViolationViewer
-
Returns the dialog design rule violation Id
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- diamDimLineAng() - Method in interface nxopen.annotations.BaseDiameterDimension
-
- DIAMETER - Static variable in class nxopen.annotations.DimensionType
-
Diameter dimension
- DIAMETER - Static variable in class nxopen.annotations.FeatureControlFrameDataBuilder.ToleranceZoneShape
-
diameter
- DIAMETER - Static variable in class nxopen.annotations.HoleCalloutSettingsBuilder.Parametertype
-
- DIAMETER - Static variable in class nxopen.annotations.HoleTableSettingsContentBuilder.Content
-
Diameter
- DIAMETER - Static variable in class nxopen.annotations.SearchCriteriaCalloutBuilder.CalloutTypes
-
Diameter
- DIAMETER - Static variable in class nxopen.annotations.SearchCriteriaDimensionBuilder.DiameterSymbolOptions
-
- DIAMETER - Static variable in class nxopen.annotations.SearchCriteriaDimensionBuilder.DimensionTypes
-
Diameter
- DIAMETER - Static variable in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.ZoneShapeOptions
-
diameter
- diameter() - Method in interface nxopen.cae.connections.IDiameter
-
Returns the connection diameter
License requirements: None.
- diameter - Variable in class nxopen.cae.CylinderBoundingVolume.CsysDiameterHeightData
-
- diameter - Variable in class nxopen.cae.CylinderBoundingVolume.EndpointsDiameterData
-
- diameter - Variable in class nxopen.cae.SphereBoundingVolume.CenterDiameterData
-
- diameter() - Method in interface nxopen.cam.BoundaryTurnBlank
-
Returns the diameter of the bar
License requirements: None.
- DIAMETER - Static variable in class nxopen.cam.BoundaryTurnMemberFineFinishOffset.TypeValue
-
- DIAMETER - Static variable in class nxopen.cam.BoundaryTurnMemberOffset.DistanceTypeMode
-
- DIAMETER - Static variable in class nxopen.cam.CylinderMillingBuilder.BlankDiameterTypes
-
Diameter
- DIAMETER - Static variable in class nxopen.cam.CylinderMillingBuilder.DiameterForHelixTypes
-
Helix Diameter
- diameter - Variable in class nxopen.cam.HolderSectionBuilder.Data
-
the diameter
- diameter() - Method in interface nxopen.cam.HoleBossSet
-
Returns the Diameter
License requirements: None.
- diameter() - Method in interface nxopen.cam.InspectionCircleFeatureBuilder
-
Returns the circle diameter
License requirements: None.
- diameter() - Method in interface nxopen.cam.InspectionCylinderFeatureBuilder
-
Returns the cylinder diameter
License requirements: None.
- diameter() - Method in interface nxopen.cam.InspectionSphereFeatureBuilder
-
Returns the sphere diameter
License requirements: None.
- DIAMETER - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.TolType
-
Diameter
- diameter() - Method in interface nxopen.cam.LaserCutoutDefinition
-
Returns the Diameter
License requirements: None.
- diameter() - Method in interface nxopen.cam.LaserTool
-
Returns the Nozzle Diameter
License requirements: None.
- diameter - Variable in class nxopen.cam.MillingTrackpointBuilder.CalculateDistanceData
-
the diameter
- diameter - Variable in class nxopen.cam.MillingTrackpointBuilder.Data
-
the diameter
- diameter - Variable in class nxopen.cam.MillingTrackpointBuilder.TrackPointData
-
the diameter
- diameter() - Method in interface nxopen.cam.ProbeCalibrateSphereMoveBuilder
-
Returns the diameter defining the sphere to probe
License requirements: None.
- diameter() - Method in interface nxopen.cam.ProbeCalibrateStylusMoveBuilder
-
Returns the diameter defining the cylinder to probe
License requirements: None.
- diameter() - Method in interface nxopen.cam.ProbeInspectBorebossMoveBuilder
-
Returns the diameter defining the cylinder to probe
License requirements: None.
- diameter - Variable in class nxopen.cam.StepParamsBuilder.Data
-
the diameter
- DIAMETER - Static variable in class nxopen.cam.TurnRoughFinishTestCut.SecondarySequenceTypes
-
Secondary Test Cut Sequence: Diameter
- diameter() - Method in interface nxopen.cam.WireGuide
-
Returns the diameter
License requirements: None.
- diameter() - Method in interface nxopen.cam.WireTool
-
Returns the Tool Diameter (inheritable double)
License requirements: cam_base ("CAM BASE")
.
- diameter() - Method in interface nxopen.die.HeelpostBuilder
-
Returns the diameter of the guide pin hole
License requirements: None.
- diameter() - Method in interface nxopen.die.HoleChildBuilder
-
Returns the diameter of the die hole.
- diameter() - Method in interface nxopen.die.HoleParentBuilder
-
Returns the diameter of die holes.
- diameter() - Method in interface nxopen.die.PadChildBuilder
-
Returns the diameter of the die pad.
- diameter() - Method in interface nxopen.die.PadParentBuilder
-
Returns the diameter of die pads.
- diameter() - Method in interface nxopen.die.PierceHoleChildBuilder
-
Returns the diameter of the pierce hole
License requirements: ug_die_design ("Die Design")
.
- diameter() - Method in interface nxopen.die.PierceHoleParentBuilder
-
Returns the diameter of pierce holes
License requirements: ug_die_design ("Die Design")
.
- diameter() - Method in interface nxopen.die.PressureSystemChildBuilder
-
Returns the diameter of the pressure system.
- diameter() - Method in interface nxopen.die.PressureSystemParentBuilder
-
Returns the diameter of pressure systems.
- diameter() - Method in interface nxopen.features.AdmResizeFaceBuilder
-
Returns the diameter to resize, only for cylinderical and sphere faces
License requirements: None.
- diameter() - Method in interface nxopen.features.AnalyzePocketBuilder
-
Returns the diameter defines the diameter of End Mill or Shperical Mill.
- diameter() - Method in interface nxopen.features.AssociativeArcBuilder
-
Returns the diameter of arc
License requirements: None.
- DIAMETER - Static variable in class nxopen.features.AssociativeArcBuilder.EndOption
-
Diameter
- DIAMETER - Static variable in class nxopen.features.AssociativeArcBuilder.MidOption
-
Diameter
- diameter() - Method in interface nxopen.features.BlendPocketBuilder
-
Returns the diameter defines the diameter of End Mill or Shperical Mill.
- diameter() - Method in interface nxopen.features.CylinderBuilder
-
Returns the diameter.
- DIAMETER - Static variable in class nxopen.features.HelixBuilder.SizeOptions
-
Size by diameter
- diameter - Variable in class nxopen.features.Hole.CounterboreHoleData
-
Expression for diameter
- diameter - Variable in class nxopen.features.Hole.CountersinkHoleData
-
Expression for diameter
- diameter() - Method in interface nxopen.features.Hole
-
Returns
the diameter of the hole.
- diameter - Variable in class nxopen.features.Hole.SimpleHoleData
-
Expression for diameter
- diameter() - Method in interface nxopen.features.HoleFeatureBuilder
-
Returns
the diameter of the hole.
- DIAMETER - Static variable in class nxopen.features.RadialDimensionBuilder.ValueOption
-
- DIAMETER - Static variable in class nxopen.features.ResizeCurveBuilder.ValueType
-
- diameter() - Method in interface nxopen.features.ResizeFaceBuilder
-
Returns the diameter to resize, only for cylinderical and sphere faces, don't use it until nx502
License requirements: None.
- diameter() - Method in interface nxopen.features.sheetmetal.AeroLighteningCutoutBuilder
-
Returns the diameter
License requirements: None.
- diameter() - Method in interface nxopen.features.sheetmetal.ClosedCornerBuilder
-
Returns the diameter.
- diameter() - Method in interface nxopen.features.sheetmetal.EditCornerBuilder
-
Returns the diameter for a circular cutout
License requirements: None.
- diameter() - Method in interface nxopen.features.sheetmetal.HoleTreatmentBuilder
-
Returns the hole diameter value associated with the treatment type
License requirements: None.
- diameter() - Method in interface nxopen.features.sheetmetal.LighteningCutoutBuilder
-
- diameter() - Method in interface nxopen.features.sheetmetal.ThreeBendCornerBuilder
-
Returns the diameter used for circular, u and v cutout corner treatments.
- diameter() - Method in interface nxopen.features.shipdesign.PenetrationAssociationBuilder
-
Returns the diameter expression
License requirements: None.
- diameter() - Method in interface nxopen.features.shipdesign.PenetrationCutoutBuilder
-
Returns the diameter expression
License requirements: None.
- diameter() - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder
-
Returns the diameter expression
License requirements: None.
- diameter() - Method in interface nxopen.features.SphereBuilder
-
Returns the diameter of the Sphere.
- diameter() - Method in interface nxopen.features.vehicledesign.BaseDataWheelBuilder
-
Returns the norminal diameter of the wheel.
- DIAMETER - Static variable in class nxopen.features.vehicledesign.DynamicCurbBuilder.WheelType
-
- DIAMETER - Static variable in class nxopen.features.vehicledesign.GroundClearanceBuilder.WheelType
-
- DIAMETER - Static variable in class nxopen.features.vehicledesign.InnerAngleBuilder.WheelSizeType
-
- DIAMETER - Static variable in class nxopen.features.vehicledesign.SlopeBuilder.WheelSizeType
-
- DIAMETER - Static variable in class nxopen.features.vehicledesign.WheelFixingBuilder.WheelSizeType
-
- DIAMETER - Static variable in class nxopen.MeasureDistanceBuilder.DistanceType
-
- DIAMETER - Static variable in class nxopen.MeasureManager.RadialMeasureType
-
- diameter() - Method in interface nxopen.mechanicalrouting.PathStockPreferenceBuilder
-
- diameter() - Method in interface nxopen.tooling.CoolingDefineChannelBuilder
-
Returns the channel diameter
License requirements: None.
- diameter() - Method in interface nxopen.tooling.CoolingPatternBuilder
-
Returns the channel diameter
License requirements: None.
- diameter - Variable in class nxopen.uf.UFCutter.HolderSection
-
- diameter - Variable in class nxopen.uf.UFCutter.TrackingPointData
-
- diameter - Variable in class nxopen.uf.UFGdt.TargetDiaArea
-
- diameter - Variable in class nxopen.uf.UFModl.SmholeData
-
- diameter - Variable in class nxopen.uf.UFModlFeatures.AskBossParmsData
-
- diameter - Variable in class nxopen.uf.UFModlFeatures.AskCylinderParmsData
-
- diameter - Variable in class nxopen.uf.UFModlFeatures.AskCylPocketParmsData
-
- diameter - Variable in class nxopen.uf.UFModlFeatures.AskSimpleHoleParmsData
-
- diameter - Variable in class nxopen.uf.UFModlFeatures.AskTaperHoleParmsData
-
- diameter - Variable in class nxopen.uf.UFModlGeneral.AskPrismParmsData
-
- diameter - Variable in class nxopen.uf.UFTurn.IpwBoxData
-
- diameter1 - Variable in class nxopen.uf.UFModlFeatures.AskCBoreHoleParmsData
-
- diameter1 - Variable in class nxopen.uf.UFModlFeatures.AskCSunkHoleParmsData
-
- diameter2 - Variable in class nxopen.uf.UFModlFeatures.AskCBoreHoleParmsData
-
- diameter2 - Variable in class nxopen.uf.UFModlFeatures.AskCSunkHoleParmsData
-
- DIAMETER_DIM - Static variable in class nxopen.Sketch.ConstraintType
-
- DIAMETER_DIM - Static variable in class nxopen.uf.UFSket.ConType
-
- DIAMETER_DISTANCE - Static variable in class nxopen.GenericMeasure.Type
-
- DIAMETER_FIT - Static variable in class nxopen.annotations.HoleTableSettingsContentBuilder.Content
-
DiameterFit
- DIAMETER_RADIUS - Static variable in class nxopen.annotations.TextComponent.TextType
-
diameter or radius or arc length symbol text
- DIAMETER_REFERENCE - Static variable in class nxopen.annotations.SearchCriteriaDimensionBuilder.ToleranceTypes
-
DiameterReference
- DIAMETER_REFERENCE - Static variable in class nxopen.annotations.ToleranceType
-
(DIA xxx)
- DIAMETER_REFERENCE_TOL - Static variable in class nxopen.uf.UFDrf.ToleranceType
-
- DIAMETER_USE_DIA - Static variable in class nxopen.uf.UFDrf.DiameterSymbol
-
- DIAMETER_VALUE - Static variable in class nxopen.routing.PathStockBuilder.AssignMethod
-
User specified diameter, creates round
space reservation stock.
- diameterBuilder() - Method in interface nxopen.cam.HoleBossSet
-
Returns the diameter builder
License requirements: None.
- diameterBuilder() - Method in interface nxopen.cam.NcmPlanarEngRetBuilder
-
Returns the engage/retract diameter builder
License requirements: None.
- diameterBuilder() - Method in interface nxopen.cam.NcmScEngRetBuilder
-
Returns the engage/retract diameter builder
License requirements: None.
- DiameterCheck - Interface in nxopen.cae.qualityaudit
-
This action performs checks on connections supporting diameter and displays errors when diameter is different from the expected one.
- DiameterDimension - Interface in nxopen.annotations
-
Represents a diameter dimension
To create or edit an instance of this class, use
RadialDimensionBuilder
Created in NX4.0.0
- diameterDimensionDimLineAngle() - Method in interface nxopen.annotations.BaseRadialDimensionBuilder
-
Returns the diameter dimension's dimension-line-angle
License requirements: None.
- diameterDimensionLineAngle() - Method in interface nxopen.annotations.BaseDiameterDimension
-
Returns a value of diameter dimension line angle
License requirements: None.
- diameterForHelix() - Method in interface nxopen.cam.CylinderMillingBuilder
-
Returns the Diameter for Helix
License requirements: None.
- diameterObjects() - Method in interface nxopen.MeasureDistanceBuilder
-
Returns the diameter objects
License requirements: None.
- DiameterRadiusLeaderStub - Class in nxopen.annotations
-
Specifies the leader stub relative to diameter/radius dimension text
- diameterRadiusPlacement() - Method in interface nxopen.annotations.RadialStyleBuilder
-
Returns the diameter radius symbol placement with respect to the dimension text.
- diameterRadiusPlacement - Variable in class nxopen.uf.UFDrf.DiameterRadiusPreferences
-
- DiameterRadiusPreferences - Interface in nxopen.annotations
-
Represents diameter and radius preferences .
- DiameterRadiusPreferences() - Constructor for class nxopen.uf.UFDrf.DiameterRadiusPreferences
-
- DiameterRadiusPreferences(UFDrf.DiameterSymbol, String, UFDrf.RadiusSymbol, String, UFDrf.DiameterRadiusPlacement, UFDrf.TextAboveLeader, double, double) - Constructor for class nxopen.uf.UFDrf.DiameterRadiusPreferences
-
- DiameterRadiusSymbolPlacement - Class in nxopen.annotations
-
Specifies the diameter/radius symbol placement relative to the dimension text
- DiameterResult - Interface in nxopen.cae.qualityaudit
-
The Quality Audit DiameterResult is a class containing information about failed diameter checks of universal connections.
- DIAMETERS_AND_HALF_ANGLE - Static variable in class nxopen.features.ConeBuilder.Types
-
Represents type of cone created by providing Diameters and Half Angle
- DIAMETERS_AND_HEIGHT - Static variable in class nxopen.features.ConeBuilder.Types
-
Represents type of cone created by providing Diameters and Height
- DIAMETERS_ONLY - Static variable in class nxopen.cam.ProfileStrategy.Types
-
Profile strategy: Diameters Only
- DIAMETERS_THEN_FACES - Static variable in class nxopen.cam.ProfileStrategy.Types
-
Profile strategy: Diameters First, Then Faces
- diameterSymbol() - Method in interface nxopen.annotations.DiameterRadiusPreferences
-
Returns the diameter symbol
License requirements: None.
- DiameterSymbol - Class in nxopen.annotations
-
Specifies the diameter symbol
- diameterSymbol() - Method in interface nxopen.annotations.RadialStyleBuilder
-
Returns the text for a user-defined diameter symbol
License requirements: None.
- diameterSymbol() - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder
-
Returns the diameter symbol
License requirements: None.
- diameterSymbol - Variable in class nxopen.uf.UFDrf.DiameterRadiusPreferences
-
- diameterSymbolText() - Method in interface nxopen.annotations.DiameterRadiusPreferences
-
Returns the symbol text for user defined diameter symbol
License requirements: None.
- diameterSymbolType() - Method in interface nxopen.annotations.RadialStyleBuilder
-
Returns the diameter symbol type
License requirements: None.
- diameterSymbolType - Variable in class nxopen.uf.UFDrf.DiameterRadiusPreferences
-
- diameterTitle - Variable in class nxopen.die.HoleChildBuilder.HoleAttributesData
-
Title for diameter attribute.
- diameterTitle - Variable in class nxopen.die.HoleParentBuilder.HoleAttributesData
-
Title for diameter attribute.
- diameterTitle - Variable in class nxopen.die.PadChildBuilder.HoleAttributesData
-
Title for diameter attribute.
- diameterTitle - Variable in class nxopen.die.PadParentBuilder.HoleAttributesData
-
Title for diameter attribute.
- diameterTitle - Variable in class nxopen.die.PierceHoleChildBuilder.HoleAttributesData
-
title for diameter attribute
- diameterTitle - Variable in class nxopen.die.PierceHoleParentBuilder.HoleAttributesData
-
title for diameter attribute
- diameterType() - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder
-
Returns the diameter setting
License requirements: None.
- DiameterType - Class in nxopen.cae.connections
-
Diameter definition types
- diameterType() - Method in interface nxopen.cae.connections.IDiameter
-
Returns the diameter type
License requirements: None.
- diameterVal - Variable in class nxopen.uf.UFDrf.AskObjectPreferencesData
-
- diameterValue() - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder
-
Returns the diameter value
License requirements: None.
- diameterValue() - Method in interface nxopen.routing.PathStockBuilder
-
- diameterValue - Variable in class nxopen.uf.UFDrf.AskPreferencesData
-
- DIAMETERX1 - Static variable in class nxopen.features.HolePackageBuilder.ThreadLengthOptions
-
1 * (tap drill diameter)
- DIAMETERX1 - Static variable in class nxopen.geometricutilities.EndHoleData.ThreadLengthOptions
-
1 * (tap drill diameter)
- DIAMETERX15 - Static variable in class nxopen.features.HolePackageBuilder.ThreadLengthOptions
-
1.5 * (tap drill diameter)
- DIAMETERX15 - Static variable in class nxopen.geometricutilities.EndHoleData.ThreadLengthOptions
-
1.5 * (tap drill diameter)
- DIAMETERX20 - Static variable in class nxopen.features.HolePackageBuilder.ThreadLengthOptions
-
2 * (tap drill diameter)
- DIAMETERX20 - Static variable in class nxopen.geometricutilities.EndHoleData.ThreadLengthOptions
-
2 * (tap drill diameter)
- DIAMETERX25 - Static variable in class nxopen.features.HolePackageBuilder.ThreadLengthOptions
-
2.5 * (tap drill diameter)
- DIAMETERX25 - Static variable in class nxopen.geometricutilities.EndHoleData.ThreadLengthOptions
-
2.5 * (tap drill diameter)
- DIAMETERX30 - Static variable in class nxopen.features.HolePackageBuilder.ThreadLengthOptions
-
3 * (tap drill diameter)
- DIAMETERX30 - Static variable in class nxopen.geometricutilities.EndHoleData.ThreadLengthOptions
-
3 * (tap drill diameter)
- DIAMETRAL - Static variable in class nxopen.annotations.DimensionMeasurementBuilder.MeasurementMethod
-
Diametral measurement type
- DIAMETRAL_SIZE - Static variable in class nxopen.uf.UFGdt.SizeValueType
-
- DIAMOND - Static variable in class nxopen.cae.MarkerType0d
-
- DIAMOND - Static variable in class nxopen.cae.ModelDisplayBuilder.FreeEdgeMarker
-
Diamond marker
- DIAMOND - Static variable in class nxopen.cae.ModelDisplayBuilder.StitchedEdgeMarker
-
Diamond marker
- DIAMOND - Static variable in class nxopen.cae.xyplot.PointMarker
-
Diamond marker
- DIAMOND - Static variable in class nxopen.fields.DisplayPropertiesBuilder.IndepDomDispType
-
- DIAMOND - Static variable in class nxopen.fields.DisplayPropertiesBuilder.ValuesEnum
-
- DIAMOND - Static variable in class nxopen.geometricutilities.RectangularPattern.SimplifiedLayoutTypes
-
Diamond Layout
- DIAMOND - Static variable in class nxopen.uf.UFDisp.PolyMarker
-
- DIAMOND - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- DIAMOND100 - Static variable in class nxopen.cam.TurnToolBuilder.InsertShapes
-
Insert shape: Diamond 100
- DIAMOND35 - Static variable in class nxopen.cam.TurnToolBuilder.InsertShapes
-
Insert shape: Diamond 35
- DIAMOND55 - Static variable in class nxopen.cam.TurnToolBuilder.InsertShapes
-
Insert shape: Diamond 55
- DIAMOND75 - Static variable in class nxopen.cam.TurnToolBuilder.InsertShapes
-
Insert shape: Diamond 75
- DIAMOND80 - Static variable in class nxopen.cam.TurnToolBuilder.InsertShapes
-
Insert shape: Diamond 80
- DIAMOND86 - Static variable in class nxopen.cam.TurnToolBuilder.InsertShapes
-
Insert shape: Diamond 86
- DiamondConnectorFeature - Interface in nxopen.linedesigner
-
Represents a typed connector feature feature
To create or edit an instance of this class, use
TypedConnectorFeatureBuilder
Created in NX9.0.0
- diaScaleFactor() - Method in interface nxopen.cae.CircularImprintBuilder
-
Returns the dia scale factor
License requirements: None.
- DIE - Static variable in class nxopen.die.PierceTaskBuilder.CenterPointOptionTypes
-
Center points output in die position
- DIE - Static variable in class nxopen.tooling.BendInsertDesignBuilder.InsertTypeOption
-
die insert
- DIE - Static variable in class nxopen.tooling.BurringInsertBuilder.ParentTypes
-
use PDW project's die part as parent part
- DIE - Static variable in class nxopen.tooling.DieBaseBuilder.ParentNodeOpt
-
use PDW project's die part as parent part
- DIE - Static variable in class nxopen.tooling.FormingInsertBuilder.ParentTypes
-
use PDW project's die part as parent part
- DIE - Static variable in class nxopen.tooling.LsdynaGeometryPreparationBuilder.TargetBinder
-
For the process, the target of binder is die.
- DIE - Static variable in class nxopen.tooling.LsdynaGeometryPreparationBuilder.TargetDie
-
For the process, the target of die is die.
- DIE - Static variable in class nxopen.tooling.LsdynaGeometryPreparationBuilder.TargetPunch
-
For the process, the target of punch is die.
- DIE - Static variable in class nxopen.tooling.SpecialFormingBuilder.PunchOrDie
-
- DIE - Static variable in class nxopen.tooling.SpecialPiercingInsertBuilder.PunchOrDieTypes
-
- die() - Method in interface nxopen.UFSession
-
- DIE_BASE - Static variable in class nxopen.tooling.BurringInsertBuilder.ParentTypes
-
use PDW project's die base part as parent part
- DIE_BASE - Static variable in class nxopen.tooling.FormingInsertBuilder.ParentTypes
-
use PDW project's die base part as parent part
- DIE_BASE_FIRST - Static variable in class nxopen.tooling.DieBaseBuilder.ParentNodeOpt
-
use PDW project's die base part as parent part
- DIE_CAVITY_AND_SLUG_HOLE - Static variable in class nxopen.tooling.PiercingInsertBuilder.Types
-
the die cavity and slug hole type
- DIE_CAVITY_AND_SLUG_HOLE - Static variable in class nxopen.tooling.SpecialPiercingInsertBuilder.PunchOrDieTypes
-
- DIE_INSERT - Static variable in class nxopen.tooling.DieInsertBuilder.DieInsertTypeItems
-
- DIE_INSERT - Static variable in class nxopen.tooling.PiercingInsertBuilder.DieInsertTypeItems
-
the die insert type
- DIE_INSERT - Static variable in class nxopen.tooling.PiercingInsertBuilder.Types
-
the die insert type
- DIE_PLATE - Static variable in class nxopen.tooling.FormingInsertBuilder.BlankPositions
-
the blank is on the die plate
- DIE_PUNCH - Static variable in class nxopen.die.AddendumSectionBuilder.SegmentType
-
Update die punch segment.
- DIE_REVERSE - Static variable in class nxopen.die.AddendumSectionBuilder.SegmentType
-
Update die reverse segment.
- DIE_SIDE - Static variable in class nxopen.tooling.DieCavityAndSlugHoleBuilder.OffsetSideOptionItems
-
The offset side is die
- DIE_SIDE - Static variable in class nxopen.tooling.PiercingInsertBuilder.NormalOffsetSideType
-
The offset side is die
- DIE_SIDE - Static variable in class nxopen.tooling.PunchInsertBuilder.NormalOffsetSideTypeItems
-
The offset side is die
- DIE_SIDE - Static variable in class nxopen.tooling.SpecialPiercingInsertBuilder.NormalOffsetSideType
-
The offset side is die
- DIE_TYPE - Static variable in class nxopen.features.sheetmetal.SolidPunchBuilder.Types
-
- DieAssistantFlangeProfile - Interface in nxopen.die
-
- DieAssistantFlangeProfileList - Interface in nxopen.die
-
Represents a list of objects.
- DieAssistantFlangeProfileType - Class in nxopen.die
-
Settings for the flange type.
- DieAssistantTrimProfile - Interface in nxopen.die
-
- DieAssistantTrimProfileList - Interface in nxopen.die
-
Represents a list of objects.
- DieAttributesBuilder - Interface in nxopen.die
-
- dieBase() - Method in interface nxopen.tooling.DieBaseBuilder
-
Returns the selected die base.
- dieBase() - Method in interface nxopen.tooling.ToolingManager
-
Returns the DieBaseCollection instance belonging to this part .
- DieBaseBuilder - Interface in nxopen.tooling
-
Represents Progressive Die Wizard and Engineering Die Wizard builder to manage die base.
- DieBaseBuilder.AlongDirectionOpt - Class in nxopen.tooling
-
along direction options.
- DieBaseBuilder.CatalogOpt - Class in nxopen.tooling
-
catalog options.
- DieBaseBuilder.DesignToolOption - Class in nxopen.tooling
-
design tool options.
- DieBaseBuilder.DieBaseTypeOpt - Class in nxopen.tooling
-
die bse types options.
- DieBaseBuilder.ParentNodeOpt - Class in nxopen.tooling
-
parent node options.
- DieBaseBuilder.PlatesNumberOpt - Class in nxopen.tooling
-
plates number options.
- DieBaseBuilder.SplitMethod - Class in nxopen.tooling
-
split method.
- DieBaseBuilder.SplitOption - Class in nxopen.tooling
-
split options.
- DieBaseBuilder.Types - Class in nxopen.tooling
-
die base types.
- DieBaseCollection - Interface in nxopen.tooling
-
- dieBaseData() - Method in interface nxopen.tooling.DieBaseBuilder
-
The action to edit die base data file.
- dieBaseReg() - Method in interface nxopen.tooling.DieBaseBuilder
-
The action to edit die base register file.
- dieBaseToDelete() - Method in interface nxopen.tooling.DieBaseBuilder
-
Returns the selected die base to delete.
- dieBaseType() - Method in interface nxopen.tooling.DieBaseBuilder
-
Returns the die base type( progressive die, single die, draw die or compound die).
- DieBooleanBuilder - Interface in nxopen.die
-
- DieBooleanBuilder.BooleanType - Class in nxopen.die
-
boolean type to apply to the selected solids
- DieBooleanBuilderList - Interface in nxopen.die
-
Represents a list of objects.
- dieBooleansList() - Method in interface nxopen.die.DieShoeBuilder
-
Returns the die boolean solids list
License requirements: None.
- DieBuildStatusOption - Class in nxopen.die
-
Settings for the build status of the die design sub features.
- DieCavityAndSlugHoleBuilder - Interface in nxopen.tooling
-
Represents die cavity and slug hole builder.
- DieCavityAndSlugHoleBuilder.BottomPlateSlugItems - Class in nxopen.tooling
-
Specifies the type of bottom plate slug.
- DieCavityAndSlugHoleBuilder.CavityTypeItems - Class in nxopen.tooling
-
Specifies the type of cavity.
- DieCavityAndSlugHoleBuilder.ClearanceOptionItems - Class in nxopen.tooling
-
Specifies the design option of piercing insert.
- DieCavityAndSlugHoleBuilder.DieInsertStackType - Class in nxopen.tooling
-
die insert stack type.
- DieCavityAndSlugHoleBuilder.DiePlateThreeSlugType - Class in nxopen.tooling
-
die plate three slug type.
- DieCavityAndSlugHoleBuilder.DiePlateTwoSlugType - Class in nxopen.tooling
-
die plate two slug type.
- DieCavityAndSlugHoleBuilder.DieShoeSlugTypeItems - Class in nxopen.tooling
-
Specifies the type of die shoe slug.
- DieCavityAndSlugHoleBuilder.InsertPositionItems - Class in nxopen.tooling
-
Specifies the position of piercing inserts, for EDW only
- DieCavityAndSlugHoleBuilder.OffsetSideOptionItems - Class in nxopen.tooling
-
Specifies the offset side of normal pierce insert design.
- dieCenterlineCoordinateSystem() - Method in interface nxopen.die.ClampingSlotBuilder
-
Returns the die centerline coordinate system for orienting the slot
License requirements: None.
- dieCenterlineCoordinateSystem() - Method in interface nxopen.die.HeelpostBuilder
-
Returns the die centerline coordinate system for orienting the heelpost
License requirements: None.
- dieCenterlineCoordinateSystem() - Method in interface nxopen.die.KeywayBuilder
-
Returns the die centerline coordinate system for orienting the keyway
License requirements: None.
- dieCenterlineCsys() - Method in interface nxopen.die.DrawDiePunchBuilder
-
Returns the die centerline csys of the draw die punch casting.
- dieClearance() - Method in interface nxopen.die.PierceHoleChildBuilder
-
Returns the die clearance of the pierce hole
License requirements: ug_die_design ("Die Design")
.
- dieClearance() - Method in interface nxopen.die.PierceHoleParentBuilder
-
Returns the die clearance of pierce holes
License requirements: ug_die_design ("Die Design")
.
- DieCollection - Interface in nxopen.die
-
Represents a Die Engineering/Design feature builder.
- DieDesDrawDieBuilder - Interface in nxopen.tooling
-
Represents the Die Design draw die management builder, which is to create a draw die by selected
sheet body, curve and base plane.
- DieDesDrawPunchBuilder - Interface in nxopen.tooling
-
Die Design draw punch management builder, create a draw die punch by selected sheet body, curve
and base plane.
- DieDesignLowerBinderBuilder - Interface in nxopen.tooling
-
- dieDesignSetting() - Method in interface nxopen.tooling.ToolingManager
-
Returns the DieDesignSettingCollection instance belonging to this part .
- DieDesignSettingBuilder - Interface in nxopen.tooling
-
- DieDesignSettingCollection - Interface in nxopen.tooling
-
- DieDesignTrimPostBuilder - Interface in nxopen.tooling
-
- DieDesPierceInsertBuilder - Interface in nxopen.tooling
-
Represents Die Design Pierce Insert builder.
- DieDesPierceInsertBuilder.Direction - Class in nxopen.tooling
-
Represents the thickness direction.
- DieDesPierceInsertBuilder.HoleShapeTypes - Class in nxopen.tooling
-
Represents the hole shape type.
- DieDirectionBuilder - Interface in nxopen.die
-
- DieDirectionBuilder.DirectionType - Class in nxopen.die
-
the options available for defining the direction
- dieEdge - Variable in class nxopen.die.Tip.MapEdgeData
-
- dieEditOffsetValueTable() - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder
-
Edit offset value table for die
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- dieEditOffsetValueTable() - Method in interface nxopen.tooling.PiercingInsertBuilder
-
Edit offset value table.
- dieeng() - Method in interface nxopen.UFSession
-
- DieEngDefineProductOrientationBuilder - Interface in nxopen.tooling
-
Die Engineer define product orientation builder.
- DieEngDefineProductOrientationBuilder.FacetQualityOption - Class in nxopen.tooling
-
the facet quality option
- DieEngDefineProductOrientationBuilder.OptimalMethod - Class in nxopen.tooling
-
the optimal method
- DieEngDefineProductOrientationBuilder.ViewDraftOptions - Class in nxopen.tooling
-
view draft options
- DieEngDieTipBuilder - Interface in nxopen.tooling
-
Die Engineer die tip management builder.
- DieEngDieTipBuilder.MaterialThicknessType - Class in nxopen.tooling
-
the material thickness type
- DieEngFormTaskBuilder - Interface in nxopen.tooling
-
- DieEngLineupBuilder - Interface in nxopen.tooling
-
Die Engineer lineup management builder.
- DieEngProcessUpdateManagerBuilder - Interface in nxopen.tooling
-
Die Engineer process update manager management builder.
- DieEngProcessUpdateManagerBuilder.Types - Class in nxopen.tooling
-
the trim task or pierce task.
- DieEngStampingCarryoverBuilder - Interface in nxopen.tooling
-
- DieEngStampingOutputBuilder - Interface in nxopen.tooling
-
- DieEngStampingOutputBuilder.DisplayProductType - Class in nxopen.tooling
-
Types of product display.
- DieEngStampingOutputBuilder.SpringbackMethodType - Class in nxopen.tooling
-
Types of springback method
- DieEngTrimAngleCheck - Interface in nxopen.tooling
-
Represents a die engineering trim angle check analysis object
To create or edit an instance of this class, use
DieEngTrimAngleCheckBuilder
Created in NX8.5.0
- DieEngTrimAngleCheckBuilder - Interface in nxopen.tooling
-
- DieEngTrimAngleCheckBuilder.DirectionOptions - Class in nxopen.tooling
-
Options to determine the method to specify direction.
- DieEngTrimTaskBuilder - Interface in nxopen.tooling
-
Die Engineer trim task management builder, create a trim task by selected die tip, trim bounds,
start plane and end plane.
- DieEngTrimTaskBuilder.TrimTaskCamType - Class in nxopen.tooling
-
the trim task cam type.
- DieEngTrimTaskBuilder.TrimTaskMatchCutType - Class in nxopen.tooling
-
the trim task match cut type.
- DieInsertBuilder - Interface in nxopen.tooling
-
Represents die insert builder.
- DieInsertBuilder.BoundingBoxTypeItems - Class in nxopen.tooling
-
Specifies the bounding box type.
- DieInsertBuilder.DieInsertTypeItems - Class in nxopen.tooling
-
Specifies the type of insert.
- DieInsertBuilder.InsertModeItems - Class in nxopen.tooling
-
Specifies the insert mode for die.
- DieInsertBuilder.PositionItems - Class in nxopen.tooling
-
Specifies the position of piercing inserts, for EDW only
- dieInsertStack() - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder
-
Returns the die insert stack
License requirements: None.
- dieInsertType() - Method in interface nxopen.tooling.DieInsertBuilder
-
Returns the die insert type.
- dieInsertType() - Method in interface nxopen.tooling.PiercingInsertBuilder
-
Returns the die insert type.
- DieLimitsBuilder - Interface in nxopen.die
-
Limits a path to a segment of the path.
- DieLimitsBuilderList - Interface in nxopen.die
-
Represents a list of objects.
- DieLocationBuilder - Interface in nxopen.die
-
- DieLocationBuilder.LocationType - Class in nxopen.die
-
the options available for defining the location
- DieLocationBuilderList - Interface in nxopen.die
-
Represents a list of objects.
- DieLocationsBuilder - Interface in nxopen.die
-
- dieOffsetValue() - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder
-
Returns the die offset value
License requirements: None.
- dieOffsetValue() - Method in interface nxopen.tooling.PiercingInsertBuilder
-
Returns the die offset value.
- diePenetration() - Method in interface nxopen.tooling.DieDesPierceInsertBuilder
-
Returns the die penetration value.
- diePitch() - Method in interface nxopen.tooling.MotionSimulationBuilder
-
Returns the die pitch to calculate controller data.
- diePitch02() - Method in interface nxopen.tooling.MotionSimulationBuilder
-
Returns the die pitch value for second strip, it's used to calculate controller data.
- DiePlaneBuilder - Interface in nxopen.die
-
- DiePlaneBuilder.PlaneType - Class in nxopen.die
-
the options available for defining the plane
- diePlateClearance() - Method in interface nxopen.tooling.BendInsertDesignBuilder
-
Returns the clearance value of die plate.
- diePlateClearance() - Method in interface nxopen.tooling.FormingInsertBuilder
-
Returns the clearance value of die plate.
- diePlateThree() - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder
-
Returns the die plate three
License requirements: None.
- diePlateTwo() - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder
-
Returns the die plate two
License requirements: None.
- diePosition() - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder
-
Returns the distance value to move die.
- dieRadius() - Method in interface nxopen.features.sheetmetal.AeroLighteningCutoutBuilder
-
Returns the die radius
License requirements: None.
- dieRadius() - Method in interface nxopen.features.sheetmetal.BeadBuilder
-
Returns the bead die radius.
- dieRadius() - Method in interface nxopen.features.sheetmetal.GussetBuilder
-
Returns the die radius value of the sharp edges of the bottom face.
- dieRadius() - Method in interface nxopen.features.sheetmetal.LighteningCutoutBuilder
-
Returns the die radius
License requirements: None.
- dieRadius() - Method in interface nxopen.features.sheetmetal.LouverBuilder
-
Returns the die radius.
- dieRadius() - Method in interface nxopen.features.sheetmetal.SolidPunchBuilder
-
Returns the Radius value of the sharp edges of the bottom face
License requirements: None.
- dieRadius - Variable in class nxopen.uf.UFModl.SmpunchData
-
- dies() - Method in interface nxopen.features.FeatureCollection
-
Returns the DieCollection instance belonging to this part .
- dieSameOffsetValue() - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder
-
Returns the die same offset value
License requirements: None.
- dieSameOffsetValue() - Method in interface nxopen.tooling.PiercingInsertBuilder
-
Returns the same offset value option of die design.
- dieSheet() - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder
-
Returns the die sheet.
- dieShoe(DieShoe) - Method in interface nxopen.die.DieCollection
-
- DieShoe - Interface in nxopen.die
-
Represents a die shoe feature
To create or edit an instance of this class, use
DieShoeBuilder
Created in NX6.0.0
- DieShoeBuilder - Interface in nxopen.die
-
Represents a Die Shoe feature builder.
- DieSimCollection - Interface in nxopen.die
-
Represents a collection of Die Simulation - Press Models
To obtain an instance of this class, refer to
Part
Created in NX6.0.0
- dieSimData() - Method in interface nxopen.Part
-
Returns the Die.DieSimCollection instance belonging to this part
Created in NX3.0.0
- dieStandardInsertInstance() - Method in interface nxopen.tooling.DieInsertBuilder
-
Returns the die standard insert instance.
- dieTip() - Method in interface nxopen.tooling.DieEngFormTaskBuilder
-
Returns the die tip selection.
- dieTip() - Method in interface nxopen.tooling.DieEngStampingCarryoverBuilder
-
Returns the die tip
License requirements: None.
- dieToolId() - Method in interface nxopen.features.sheetmetal.BendOptions
-
Returns the die tool id selected
License requirements: None.
- dieToolIdName() - Method in interface nxopen.features.sheetmetal.BendOptions
-
Returns the die tool id string selected
License requirements: None.
- DIFFERENCE - Static variable in class nxopen.cae.PostGraphAcrossIterationsBuilder.CombinationMethod
-
- DIFFERENCE - Static variable in class nxopen.cae.ResultProbeBuilder.CombineAcrossEntities
-
- DIFFERENT - Static variable in class nxopen.validate.XmlComparator.Result
-
Represents two xml files are different
- DIFFERENT_CONVEXITY_ROLL_OVER - Static variable in class nxopen.features.EdgeBlendBuilder.Overlap
-
If different convexity,roll over
- differentColorsAsBoundaryFacesOption() - Method in interface nxopen.tooling.MWSearchRegionBuilder
-
Returns the option to use different colors as boundary faces
License requirements: None.
- differentPenetration() - Method in interface nxopen.tooling.PunchInsertBuilder
-
Returns the different penetration for punch
License requirements: None.
- DIFFUSE_ABSORBED_HEAT_FLUX - Static variable in class nxopen.cae.Result.Quantity
-
- DIFFUSE_HEAT_FLUX - Static variable in class nxopen.cae.Result.Quantity
-
- DIFFUSE_INCIDENT_HEAT_FLUX - Static variable in class nxopen.cae.Result.Quantity
-
- DIFFUSE_REFLECTED_HEAT_FLUX - Static variable in class nxopen.cae.Result.Quantity
-
- DIFFUSE_TRANSMITTED_HEAT_FLUX - Static variable in class nxopen.cae.Result.Quantity
-
- diffuseFactor - Variable in class nxopen.DisplayManager.J3dMaterial
-
diffuse reflection coeficient
- DIFFUSION_RESISTANCE - Static variable in class nxopen.cae.Result.Quantity
-
- digital() - Method in interface nxopen.motion.ControlInputPortBuilder
-
Returns a logical flag to specify whether the element is digital (sampled) or analog.
- dim1() - Method in interface nxopen.motion.StandardSectionBuilder
-
Returns the Dim1
License requirements: mechanisms ("MECHANISMS")
.
- dim2() - Method in interface nxopen.motion.StandardSectionBuilder
-
Returns the Dim2
License requirements: mechanisms ("MECHANISMS")
.
- dim3() - Method in interface nxopen.motion.StandardSectionBuilder
-
Returns the Dim3
License requirements: mechanisms ("MECHANISMS")
.
- dim4() - Method in interface nxopen.motion.StandardSectionBuilder
-
Returns the Dim4
License requirements: mechanisms ("MECHANISMS")
.
- dim5() - Method in interface nxopen.motion.StandardSectionBuilder
-
Returns the Dim5
License requirements: mechanisms ("MECHANISMS")
.
- dim6() - Method in interface nxopen.motion.StandardSectionBuilder
-
Returns the Dim6
License requirements: mechanisms ("MECHANISMS")
.
- DIM_AND_NON_SELECTABLE - Static variable in class nxopen.preferences.SessionWorkPlane.ObjectDisplay
-
Deprecated.
Dim and Non Selectable
- DIM_AND_SELECTABLE - Static variable in class nxopen.preferences.SessionWorkPlane.ObjectDisplay
-
Deprecated.
Dim and Selectable
- DIM_CONS - Static variable in class nxopen.uf.UFSket.ConClass
-
- DIM_DIAMETER - Static variable in class nxopen.uf.UFDisp.PolyMarker
-
- DIM_DIAMETER - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- DIM_PARALLEL - Static variable in class nxopen.uf.UFDisp.PolyMarker
-
- DIM_PARALLEL - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- DIM_PERPENDICULAR - Static variable in class nxopen.uf.UFDisp.PolyMarker
-
- DIM_PERPENDICULAR - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- DIM_RADIUS - Static variable in class nxopen.uf.UFDisp.PolyMarker
-
- DIM_RADIUS - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- DIM_TEXT - Static variable in class nxopen.uf.UFDrf.TextType
-
- dimAngularFormatTolerance - Variable in class nxopen.uf.UFDrf.UnitsFormatPreferences
-
- dimAppendedTextSpaceFactor() - Method in interface nxopen.annotations.LetteringPreferences
-
Returns the dimension/appended text space factor
License requirements: None.
- dimAppTextSpaceFactor - Variable in class nxopen.uf.UFDrf.LetteringPreferences
-
- dimArrowDisplay() - Method in interface nxopen.annotations.DimensionStyleBuilder
-
Returns the dimension arrow display option
License requirements: None.
- dimBalFirst() - Method in interface nxopen.tooling.LayoutBuilder
-
Returns the first dimension for balance transform
License requirements: None.
- dimBalSecond() - Method in interface nxopen.tooling.LayoutBuilder
-
Returns the second dimension for balance transform
License requirements: None.
- dimCompare() - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
- dimDimLineSpaceFactor() - Method in interface nxopen.annotations.LetteringPreferences
-
Returns the dimension/dimension line space factor
License requirements: None.
- dimDimLineSpaceFactor - Variable in class nxopen.uf.UFDrf.LetteringPreferences
-
- DIMENSION - Static variable in class nxopen.annotations.ArcComponent.ArcType
-
dimension arc
- dimension - Variable in class nxopen.annotations.CharacterSpaceFactor
-
Standard Font Character Space Factor for Dimension Text
- Dimension - Interface in nxopen.annotations
-
Represents a dimension
Abstract class
.
- DIMENSION - Static variable in class nxopen.annotations.PmiFilterByType.Type
-
Indicates a PMI dimension type
- DIMENSION - Static variable in class nxopen.annotations.SearchModelViewBuilder.PmiTypes
-
dimension type
- DIMENSION - Static variable in class nxopen.CGMBuilder.SizeOption
-
Dimension, uses the units along with X and Y dimensions to determine CGM size
- DIMENSION - Static variable in class nxopen.drawings.AnnotationSettingsBuilder.AnnotationTypeEnum
-
- dimension() - Method in interface nxopen.features.EditDimensionBuilder
-
Returns the feature dimension
License requirements: None.
- DIMENSION - Static variable in class nxopen.layout2d.Layout2dComponentMemberType
-
- DIMENSION - Static variable in class nxopen.PrintPDFBuilder.SizeOption
-
Dimension
- DIMENSION - Static variable in class nxopen.Sketch.ConstraintClass
-
A dimensional constraint
- dimension - Variable in class nxopen.uf.UFSf.AskElementData
-
- Dimension.DimensionTextData - Class in nxopen.annotations
-
- Dimension.MeasurementTypes - Class in nxopen.annotations
-
Specifies dimension measurement types
- DIMENSION0D - Static variable in class nxopen.uf.UFSf.MeshDimension
-
- DIMENSION1D - Static variable in class nxopen.uf.UFSf.MeshDimension
-
- DIMENSION2D - Static variable in class nxopen.uf.UFSf.MeshDimension
-
- DIMENSION3D - Static variable in class nxopen.uf.UFSf.MeshDimension
-
- DIMENSION_ANY - Static variable in class nxopen.uf.UFSf.MeshDimension
-
- DIMENSION_LABEL - Static variable in class nxopen.uf.UFConstants
-
- DIMENSION_TEXT_ALIGNED - Static variable in class nxopen.uf.UFDrf.DimensionOrientation
-
- DIMENSION_TEXT_BY_ANGLE - Static variable in class nxopen.uf.UFDrf.DimensionOrientation
-
- DIMENSION_TEXT_HORIZONTAL - Static variable in class nxopen.uf.UFDrf.DimensionOrientation
-
- DIMENSION_TEXT_OVER_DIMENSION_LINE - Static variable in class nxopen.uf.UFDrf.DimensionOrientation
-
- DIMENSION_TEXT_PERPENDICULAR - Static variable in class nxopen.uf.UFDrf.DimensionOrientation
-
- DIMENSION_TEXT_SPLIT_BY_DIMENSION_LINE - Static variable in class nxopen.uf.UFDrf.DimensionOrientation
-
- DIMENSIONAL_MARKUP_LANGUAGE - Static variable in class nxopen.cam.InspectionAnalyzeOutputBuilder.OutputFormatType
-
DML
- dimensionalConstraint() - Method in interface nxopen.InferredConstraintsBuilder
-
Returns the dimensional constraint infer-constraint setting.
- dimensionality() - Method in interface nxopen.Scalar
-
Returns the dimensionality of a scalar.
- dimensionality - Variable in class nxopen.uf.UFModeling.AskObjDimensionalityData
-
- dimensionalityAsString() - Method in interface nxopen.blockstyler.ExpressionBlock
-
Returns the Dimensionality as string.
- dimensionAngularFormat() - Method in interface nxopen.annotations.UnitsStyleBuilder
-
Returns the dimension angular format and precision
License requirements: None.
- dimensionAngularFormat - Variable in class nxopen.uf.UFDrf.UnitsFormatPreferences
-
- dimensionArrowheadType() - Method in interface nxopen.annotations.NarrowDimensionPreferences
-
Returns the dimension arrowhead type when no space for normal arrowheads
License requirements: None.
- DimensionBuilder - Interface in nxopen.features
-
Represents a
DimensionBuilder
The sub-class should create an instance of corresponding object
Default values.
- dimensionCharacterSize() - Method in interface nxopen.tooling.AutoDimensionBuilder
-
Returns the tolerance character size
License requirements: None.
- DimensionCollection - Interface in nxopen.annotations
-
Represents a collection of
Dimension
objects
This is an collection class.
- dimensionColor() - Method in interface nxopen.preferences.PartSketch
-
Returns the sketch dimension color
License requirements: None.
- dimensionColor() - Method in interface nxopen.tooling.AutoDimensionBuilder
-
Returns the dimension color
License requirements: None.
- DimensionData - Interface in nxopen.annotations
-
Represents dimension data .
- DimensionData() - Constructor for class nxopen.uf.UFModl.DimensionData
-
- DimensionData(int, Tag, double, double[], double[], double[], double, double, Tag, String, Tag[], int, UFCurve.Line, UFCurve.Line) - Constructor for class nxopen.uf.UFModl.DimensionData
-
- dimensionDecimalPlaces() - Method in interface nxopen.annotations.AngularTolerance
-
Returns the number of decimal places for dimension
License requirements: None.
- dimensionDisplayOption() - Method in interface nxopen.annotations.NarrowDimensionPreferences
-
Returns the dimension display option
License requirements: None.
- DimensionGeometry() - Constructor for class nxopen.Sketch.DimensionGeometry
-
- DimensionGeometry(NXObject, Sketch.AssocType, int, Point3d, NXObject) - Constructor for class nxopen.Sketch.DimensionGeometry
-
Constructor for the DimensionGeometry object.
- dimensionLabel() - Method in interface nxopen.preferences.SessionSketch
-
Returns the dimension label
License requirements: None.
- dimensionLabel() - Method in interface nxopen.preferences.SketchPreferences
-
Returns the dimension label.
- dimensionLeaderAngle() - Method in interface nxopen.annotations.NarrowDimensionPreferences
-
Returns the dimension leader angle
License requirements: None.
- dimensionLeadingZero() - Method in interface nxopen.annotations.UnitsFormatPreferences
-
Returns the dimension leading zero display property
License requirements: None.
- dimensionLine - Variable in class nxopen.annotations.Annotation.AssociativeOriginData
-
1 for dimension line 1, 2 for dimension line 2.
- dimensionLine - Variable in class nxopen.uf.UFDrf.AssociativeOrigin
-
- dimensionLinearUnits() - Method in interface nxopen.annotations.UnitsStyleBuilder
-
Returns the dimension linear units
License requirements: None.
- dimensionLinearUnits - Variable in class nxopen.uf.UFDrf.UnitsFormatPreferences
-
- dimensionLocation() - Method in interface nxopen.features.DimensionBuilder
-
Returns the dimension location/placement controlled by the annotation origin block
License requirements: None.
- DimensionMeasurementBuilder - Interface in nxopen.annotations
-
- DimensionMeasurementBuilder.MeasurementMethod - Class in nxopen.annotations
-
measurement method for the dimensions
- dimensionNxTextCharacterSpaceFactor() - Method in interface nxopen.annotations.LetteringStyleBuilder
-
Returns the dimension NX text character space factor.
- dimensionOffset() - Method in interface nxopen.annotations.DimensionSet
-
Returns the dimension offset
License requirements: None.
- dimensionOrientation() - Method in interface nxopen.features.LinearDimensionBuilder
-
Returns the OrientXpress that is employed in the ADM Linear Dimension Feature
License requirements: None.
- dimensionOrientationVector() - Method in interface nxopen.features.LinearDimensionBuilder
-
Returns the dimension orientation vector for the Linear Dimension
License requirements: None.
- dimensionOrSet() - Method in interface nxopen.annotations.DimensionSetBuilder
-
Returns the dimension or dimension set object
License requirements: None.
- dimensionPlane() - Method in interface nxopen.features.RadialDimensionBuilder
-
Returns the dimension plane
License requirements: None.
- DimensionPreferences - Interface in nxopen.annotations
-
Represents dimension preferences .
- DimensionPreferences() - Constructor for class nxopen.uf.UFDrf.DimensionPreferences
-
- DimensionPreferences(UFDrf.ToleranceType, double, double, double, double, double, double, int, int, int, int, int, int, UFDrf.FractionDenominator, UFDrf.FractionDenominator, UFDrf.TextArrowPlacement, UFDrf.ExtensionLineDisplay, UFDrf.ArrowDisplay, boolean, UFDrf.DimensionOrientation, double, double, double, UFDrf.NarrowDimensionInfo, UFDrf.ArrowheadAndFillType, UFDrf.ChamferDimensionData, UFDrf.InspectionType, UFDrf.ReferenceSymbolType, UFDrf.TrimDimLineStyle) - Constructor for class nxopen.uf.UFDrf.DimensionPreferences
-
- DimensionPreferences1() - Constructor for class nxopen.uf.UFDrf.DimensionPreferences1
-
- DimensionPreferences1(UFDrf.ToleranceType, double, double, double, double, double, double, int, int, int, int, int, int, UFDrf.FractionDenominator, UFDrf.FractionDenominator, UFDrf.TextArrowPlacement, UFDrf.ExtensionLineDisplay, UFDrf.ArrowDisplay, boolean, UFDrf.DimensionOrientation, double, double, double, UFDrf.NarrowDimensionInfo, UFDrf.ArrowheadAndFillType, UFDrf.ChamferDimensionData, UFDrf.InspectionType, UFDrf.ReferenceSymbolType, UFDrf.TrimDimLineStyle) - Constructor for class nxopen.uf.UFDrf.DimensionPreferences1
-
- DimensionRule - Interface in nxopen.cam
-
Represents a DimensionRule Builder .
- dimensionRule() - Method in interface nxopen.drafting.RulesBuilder
-
Returns the dimension rule
License requirements: None.
- DimensionRule.Types - Class in nxopen.cam
-
dimension rule types .
- DIMENSIONS - Static variable in class nxopen.cam.LaserCutoutDefinition.Types
-
Dimensions
- dimensions() - Method in interface nxopen.Part
-
Returns the DimensionCollection instance belonging to this part .
- dimensions() - Method in interface nxopen.tooling.AutoDimensionBuilder
-
Returns the selected dimensions to edit
License requirements: None.
- dimensions - Variable in class nxopen.uf.UFAssem.IsetArrayData
-
- dimensions - Variable in class nxopen.uf.UFAssem.McArrayData
-
- Dimensions() - Constructor for class nxopen.uf.UFCgm.Dimensions
-
- Dimensions(UFCgm.Units, double[], double[]) - Constructor for class nxopen.uf.UFCgm.Dimensions
-
- dimensions - Variable in class nxopen.uf.UFCgm.Dimensions
-
- dimensions - Variable in class nxopen.uf.UFCgm.Size
-
- DIMENSIONS_ALL - Static variable in class nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter
-
Dimension All Report Filter
- DIMENSIONS_ORIGIN - Static variable in class nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter
-
Dimension Origin Report Filter
- DIMENSIONS_RETAINED_STATUS - Static variable in class nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter
-
Dimension Retained Status Report Filter
- DIMENSIONS_SIZE - Static variable in class nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter
-
Dimension Size Report Filter
- DimensionsData() - Constructor for class nxopen.mfg.am.BuildTray.DimensionsData
-
- dimensionSeed - Variable in class nxopen.cae.CaeGroupCollection.AutoGroupSeedNames
-
prefix seed name for auto groups grouped by dimension
- dimensionSet() - Method in interface nxopen.annotations.BaseLinearDimensionBuilder
-
Returns the dimension set
License requirements: None.
- DimensionSet - Interface in nxopen.annotations
-
Represents a dimension set
This is an abstract class.
- DimensionSetBuilder - Interface in nxopen.annotations
-
Represents a
DimensionSetBuilder
This is a sub-builder class and cannot be directly instantiated
Created in NX9.0.0
- DimensionSetBuilder.DimensionSetMethod - Class in nxopen.annotations
-
dimension set method
- DimensionSetCollection - Interface in nxopen.annotations
-
- dimensionSets() - Method in interface nxopen.annotations.AnnotationManager
-
DimensionSet collection .
- dimensionStandardTextCharacterSpaceFactor() - Method in interface nxopen.annotations.LetteringStyleBuilder
-
Returns the dimension Standard text character space factor.
- dimensionState() - Method in interface nxopen.SketchDimensionalConstraint
-
Returns the dimension status.
- dimensionStyle() - Method in interface nxopen.annotations.StyleBuilder
-
Returns the dimension style builder
License requirements: None.
- DimensionStyleBuilder - Interface in nxopen.annotations
-
- dimensionTags - Variable in class nxopen.uf.UFGdt.AnnotationTags
-
- dimensionText - Variable in class nxopen.uf.UFDrf.LetteringPreferences
-
- dimensionTextAspectRatio() - Method in interface nxopen.annotations.LetteringStyleBuilder
-
Returns the dimension text aspect ratio.
- dimensionTextCharSpaceFactor() - Method in interface nxopen.annotations.LetteringStyleBuilder
-
Returns the dimension text space factor.
- dimensionTextColor() - Method in interface nxopen.annotations.LetteringStyleBuilder
-
Returns the dimension text color
License requirements: None.
- DimensionTextData() - Constructor for class nxopen.annotations.Dimension.DimensionTextData
-
- dimensionTextFont() - Method in interface nxopen.annotations.LetteringStyleBuilder
-
Returns the dimension text font
License requirements: None.
- DimensionTextFormat - Class in nxopen.annotations
-
Specifies the dimension text format
- dimensionTextItalicized() - Method in interface nxopen.annotations.LetteringStyleBuilder
-
Returns the dimension text italic status
License requirements: None.
- dimensionTextLineSpaceFactor() - Method in interface nxopen.annotations.LetteringStyleBuilder
-
Returns the dimension text line space factor
License requirements: None.
- dimensionTextLineWidth() - Method in interface nxopen.annotations.LetteringStyleBuilder
-
Returns the dimension text line width.
- dimensionTextOffset() - Method in interface nxopen.annotations.NarrowDimensionPreferences
-
Returns the dimension text offset
License requirements: None.
- dimensionTextOrientation() - Method in interface nxopen.annotations.NarrowDimensionPreferences
-
Returns the dimension text orientation
License requirements: None.
- dimensionTextSize() - Method in interface nxopen.annotations.LetteringStyleBuilder
-
Returns the dimension text character size
License requirements: None.
- dimensionTextSymbolAspectRatio() - Method in interface nxopen.annotations.LetteringStyleBuilder
-
Returns the symbol aspect ratio for dimension text (only available for symbols
when using standard font).
- dimensionTolerancePlacement() - Method in interface nxopen.annotations.UnitsStyleBuilder
-
Returns the dimension tolerance placement relative to the dimension value
License requirements: None.
- dimensionTolerancePlacement - Variable in class nxopen.uf.UFDrf.UnitsFormatPreferences
-
- DimensionType - Class in nxopen.annotations
-
Specifies the type of dimension being created
- dimensionType() - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder
-
Returns the dimension type
License requirements: None.
- dimensionType() - Method in interface nxopen.features.sheetmetal.DimpleBuilder
-
Returns the Offset Dimension
The actual extent distance of the Dimple will be determined by the active dimension option.
- dimensionType() - Method in interface nxopen.features.sheetmetal.JogBuilder
-
Returns the Offset Dimension
The actual extent distance of the Jog will be determined by the active dimension option.
- dimensionType() - Method in interface nxopen.SketchAutoDimensionBuilder
-
Returns the enum dim type
License requirements: None.
- DimensionUnit - Class in nxopen.annotations
-
Specifies the dimension unit
- dimensionValue() - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder
-
Returns the dimension value
License requirements: None.
- dimensionValueDp - Variable in class nxopen.uf.UFDrf.DimensionPreferences
-
- dimensionValueDp - Variable in class nxopen.uf.UFDrf.DimensionPreferences1
-
- dimensionValuePrecision() - Method in interface nxopen.annotations.DimensionStyleBuilder
-
Returns the dimension value precision
License requirements: None.
- dimensionValueType() - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder
-
Returns the dimension value enum
License requirements: None.
- dimensionWorkflow() - Method in interface nxopen.drafting.PreferencesBuilder
-
Returns the Dimension Workflow builder
License requirements: None.
- DimensionWorkflowBuilder - Interface in nxopen.annotations
-
Represents a Annotations WorkFlowBuilder.
- dimExp - Variable in class nxopen.uf.UFSket.ReadDimensionData
-
- dimFractionDenominator - Variable in class nxopen.uf.UFDrf.DimensionPreferences
-
- dimFractionDenominator - Variable in class nxopen.uf.UFDrf.DimensionPreferences1
-
- dimInfo - Variable in class nxopen.uf.UFDrf.AskDimInfoData
-
- DimInfo() - Constructor for class nxopen.uf.UFDrf.DimInfo
-
- DimInfo(int, UFDrf.DraftAidTextInfo[], int, UFDrf.DimLineInfo[], int, UFDrf.ArcInfo[], int, UFDrf.ArrowInfo[]) - Constructor for class nxopen.uf.UFDrf.DimInfo
-
- dimInspectionType - Variable in class nxopen.uf.UFDrf.DimensionPreferences
-
- dimInspectionType - Variable in class nxopen.uf.UFDrf.DimensionPreferences1
-
- dimLabel - Variable in class nxopen.uf.UFSket.AskLegacyPreferencesData
-
- dimLabel - Variable in class nxopen.uf.UFSket.AskPreferencesData
-
- dimLineInfo - Variable in class nxopen.uf.UFDrf.DimInfo
-
- DimLineInfo() - Constructor for class nxopen.uf.UFDrf.DimLineInfo
-
- DimLineInfo(UFDrf.DraftAidLine, int, UFDrf.AssocInfo[]) - Constructor for class nxopen.uf.UFDrf.DimLineInfo
-
- dimLineSpaceFactor() - Method in interface nxopen.annotations.LetteringStyleBuilder
-
Returns the dimension line space factor.
- DimObject() - Constructor for class nxopen.uf.UFSket.DimObject
-
- DimObject(Tag, UFSket.AssocType, int) - Constructor for class nxopen.uf.UFSket.DimObject
-
- dimObject1 - Variable in class nxopen.uf.UFSket.ReadDimensionData
-
- dimObject2 - Variable in class nxopen.uf.UFSket.ReadDimensionData
-
- dimObjs - Variable in class nxopen.uf.UFSket.ReadDimensionalConstraintData
-
- dimOrigin - Variable in class nxopen.uf.UFDrf.AskDimInfoData
-
- dimOrigin - Variable in class nxopen.uf.UFSket.ReadDimensionalConstraintData
-
- dimOrigin - Variable in class nxopen.uf.UFSket.ReadDimensionData
-
- dimOriginCompare() - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
- Dimple - Interface in nxopen.features
-
Represents a Dimple feature
To create or edit an instance of this class, use
DimpleBuilder
Created in NX5.0.0
- DimpleBuilder - Interface in nxopen.features.sheetmetal
-
Represents a Dimple feature builder.
- DimpleBuilder.DepthTypeOptions - Class in nxopen.features.sheetmetal
-
This enum represents the depth direction for the dimple.
- DimpleBuilder.DimensionTypeOptions - Class in nxopen.features.sheetmetal
-
the Dimension options for dimple.
- DimpleBuilder.SectionSideOptions - Class in nxopen.features.sheetmetal
-
This enum represents the side of the section that the dimple punches material.
- DimpleBuilder.SidewallTypeOptions - Class in nxopen.features.sheetmetal
-
the side walls material option.
- dimPrecision - Variable in class nxopen.uf.UFGdt.LimitsAndFitsData
-
- dimReferenceType - Variable in class nxopen.uf.UFDrf.DimensionPreferences
-
- dimReferenceType - Variable in class nxopen.uf.UFDrf.DimensionPreferences1
-
- dimRetainedStatusCompare() - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
- dimSizeCompare() - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
- dimSubtype - Variable in class nxopen.uf.UFDrf.AskDimInfoData
-
- dimTag - Variable in class nxopen.uf.UFSket.ReadDimensionalConstraintData
-
- dimTags - Variable in class nxopen.uf.UFSket.AskDimensionsOfSketchData
-
- dimTolerance() - Method in interface nxopen.tooling.CalculateAreaBuilder
-
Returns the dim tolerance used as the area calculation tolerance.
- dimToleranceTextSpaceFactor() - Method in interface nxopen.annotations.LetteringPreferences
-
Returns the dimension/tolerance text space factor
License requirements: None.
- dimTolTextSpaceFactor - Variable in class nxopen.uf.UFDrf.LetteringPreferences
-
- dimType - Variable in class nxopen.uf.UFSket.ReadDimensionalConstraintData
-
- dimType - Variable in class nxopen.uf.UFSket.ReadDimensionData
-
- dimX() - Method in interface nxopen.tooling.LayoutRepositionBuilder
-
Returns the distance dimension in X-axis
License requirements: None.
- dimXdist() - Method in interface nxopen.tooling.LayoutBuilder
-
Returns the cavity distance dimension in X-axis
License requirements: None.
- dimY() - Method in interface nxopen.tooling.LayoutRepositionBuilder
-
Returns the distance dimension in Y-axis
License requirements: None.
- dimYdist() - Method in interface nxopen.tooling.LayoutBuilder
-
Returns the cavity distance dimension in Y-axis
License requirements: None.
- dimZeroToleranceDisplayStyle() - Method in interface nxopen.annotations.DimensionStyleBuilder
-
Returns the dimension zero tolerance display style
License requirements: None.
- DIN - Static variable in class nxopen.annotations.SurfaceFinishBuilder.StandardType
-
DIN
- DIN - Static variable in class nxopen.annotations.SurfaceFinishStandard
-
DIN
- DIN - Static variable in class nxopen.annotations.WeldStandard
-
DIN standard
- DIN2002 - Static variable in class nxopen.annotations.SurfaceFinishBuilder.StandardType
-
DIN 2002
- DIN2002 - Static variable in class nxopen.annotations.SurfaceFinishStandard
-
DIN 2002
- DIN6935 - Static variable in class nxopen.features.sheetmetal.AdvancedFlangeBuilder.LengthReferences
-
- DIN6935FORMULA - Static variable in class nxopen.preferences.PartSheetmetal.BendDefinitionMethodOptions
-
The DIN6935 formula method
- dIncrement - Variable in class nxopen.linedesigner.FactoryCadGeoEquipmentAssemblyBuilder.UpdatedControlData
-
- dIncrement - Variable in class nxopen.linedesigner.FactoryCadGeoEquipmentBuilder.UpdatedControlData
-
- DINT - Static variable in class nxopen.ame.ConstantType
-
- DINT - Static variable in class nxopen.ame.InterfaceAccessType
-
- DINT - Static variable in class nxopen.ame.PlcDataType
-
- DIO - Static variable in class nxopen.ame.AMEManager.CreateStationType
-
- dipole() - Method in interface nxopen.motion.BushingDefine
-
Returns the dipole option
License requirements: mechanisms ("MECHANISMS")
.
- dir - Variable in class nxopen.facet.FacetedFace.SurfaceData
-
- dir - Variable in class nxopen.uf.UFFacet.AskSurfaceDataForFaceData
-
- dir - Variable in class nxopen.uf.UFModeling.AskFaceData
-
- dir - Variable in class nxopen.uf.UFModl.AskSweepDirectionData
-
- dir - Variable in class nxopen.uf.UFModl.StringList
-
- DIRECT - Static variable in class nxopen.cam.BoundaryMemberSet.ConnectMemberType
-
direct
- DIRECT - Static variable in class nxopen.cam.LaserLinearMove.MoveTypes
-
Direct
- DIRECT - Static variable in class nxopen.cam.NcmPlanarBuilder.TransferBetweenLevelsTypes
-
direct
- DIRECT - Static variable in class nxopen.cam.NcmPlanarBuilder.TransferBetweenRegionsTypes
-
direct
- DIRECT - Static variable in class nxopen.cam.NcmPlanarBuilder.TransferWithinLevelsTypes
-
direct
- DIRECT - Static variable in class nxopen.cam.NcmTransfer.TransferTypes
-
direct
- DIRECT - Static variable in class nxopen.cam.NcmTransferBuilder.TraverseTypes
-
traverse direct
- DIRECT - Static variable in class nxopen.cam.NcmTurnThreadBuilder.LocalReturnTypes
-
Direct
- DIRECT - Static variable in class nxopen.cam.NcmWedmBuilder.LeadInMethodTypes
-
direct lead in
- DIRECT - Static variable in class nxopen.cam.NcmWedmBuilder.LeadOutMethodTypes
-
direct lead out
- DIRECT - Static variable in class nxopen.cam.OperationBuilder.OptimizationDistanceTypes
-
direct
- DIRECT - Static variable in class nxopen.cam.ProbeProtectedParametersBuilder.AppMethodTypes
-
direct
- DIRECT - Static variable in class nxopen.cam.TeachmodeLinearMoveBuilder.MoveTypes
-
Direct
- DIRECT - Static variable in class nxopen.cam.ToolPathEditorBuilder.ConnectionMethodType
-
- DIRECT - Static variable in class nxopen.cam.ToolPathSplitBuilder.TransferTypes
-
direct transfer type
- DIRECT - Static variable in class nxopen.cam.ToolPathSplitParametersBuilder.TransferTypes
-
direct transfer type
- DIRECT - Static variable in class nxopen.cam.TurnAvoidanceGohomeBuilder.GohomePointMotionTypes
-
Motion type: Direct to point.
- DIRECT - Static variable in class nxopen.cam.TurnAvoidancePathPointsBuilder.MotionTypes
-
Motion to Point: Direct
- DIRECT - Static variable in class nxopen.cam.TurnAvoidanceReturnBuilder.ReturnPointMotionTypes
-
Motion type: Direct to point.
- DIRECT - Static variable in class nxopen.cam.TurnAvoidanceStartBuilder.StartPointMotionTypes
-
Motion type: Direct to point.
- DIRECT - Static variable in class nxopen.cam.TurnAvoidanceStartOfEngageBuilder.StartOfEngageMotionTypes
-
Motion type: Direct to start of engage.
- DIRECT - Static variable in class nxopen.cam.TurnMoveToPointBuilder.DirectionTypes
-
direct
- DIRECT - Static variable in class nxopen.cam.TurnRoughFinishLocalReturnBuilder.ReturnMoveModeTypes
-
Return Move: Direct
- DIRECT - Static variable in class nxopen.cam.TurnRoughFinishTestCut.ReturnMoveTypes
-
Test Cut Return Move: Direct
- DIRECT - Static variable in class nxopen.die.FlangeTaskBuilder.CamTypes
-
Direct
- DIRECT - Static variable in class nxopen.die.PierceTaskBuilder.CamTypes
-
Direct
- DIRECT - Static variable in class nxopen.die.TrimTaskBuilder.CamTypes
-
Direct
- DIRECT - Static variable in class nxopen.mechanicalrouting.PathTransitionBuilder.Type
-
- DIRECT - Static variable in class nxopen.preferences.SessionModeling.SketchEditType
-
Edit sketch without entering task environment
- DIRECT - Static variable in class nxopen.routing.HealMethod
-
- DIRECT - Static variable in class nxopen.tooling.DieEngTrimTaskBuilder.TrimTaskCamType
-
- DIRECT - Static variable in class nxopen.weld.DatumSurfaceBuilder.Types
-
direct location
- DIRECT_MODEL - Static variable in class nxopen.pdm.FileManagement.FileType
-
- DIRECT_ON_PART - Static variable in class nxopen.cam.LevelToLevel.Types
-
Direct on part
- DIRECT_PREVIOUS_PLANE_BACKUP - Static variable in class nxopen.cam.NcmPlanarBuilder.TransferWithinLevelsTypes
-
direct/previous plane backup
- DIRECT_PREVIOUS_PLANE_BACKUP - Static variable in class nxopen.cam.NcmTransfer.TransferTypes
-
direct/previous plane backup
- DIRECT_REFLECT - Static variable in class nxopen.features.vehicledesign.ReflectionDataBuilder.ReflectMethodType
-
direct reflect
- DIRECTED - Static variable in class nxopen.annotations.Dimension.MeasurementTypes
-
Directed
- DIRECTED - Static variable in class nxopen.annotations.SearchCriteriaDimensionBuilder.MeasurementTypes
-
Linear Directed
- DIRECTED_DATUM - Static variable in class nxopen.uf.UFGdt.DatumAssocType
-
- DIRECTED_DIMENSION_TYPE - Static variable in class nxopen.uf.UFGdt.ToleranceType
-
- directEngageRetractMode() - Method in interface nxopen.cam.TurnEngageRetractBuilder
-
Returns the direct engage/retract mode
License requirements: None.
- direction() - Method in interface nxopen.annotations.DimensionMeasurementBuilder
-
- direction() - Method in interface nxopen.annotations.FeatureControlFrameIndicatorBuilder
-
Returns the direction
License requirements: None.
- direction - Variable in class nxopen.assemblies.ClearanceSet.InterferenceData
-
a unit vector indicating the direction of penetration
- direction() - Method in interface nxopen.Axis
-
- direction() - Method in interface nxopen.blockstyler.ReverseDirection
-
Returns the Direction.
- direction - Variable in class nxopen.cae.ElementAssociatedDataUtils.AskBeamData
-
Orientation direction.
- DIRECTION - Static variable in class nxopen.cae.ElementRotateBuilder.MethodType
-
translate along a vector
- DIRECTION - Static variable in class nxopen.cae.ElementTranslateBuilder.MethodType
-
translate along a vector
- direction() - Method in interface nxopen.cae.MeshPointProjectBuilder
-
Returns the direction
License requirements: None.
- direction() - Method in interface nxopen.cae.modelcheck.AlignShellElementFirstEdgeBuilder
-
Returns the direction
License requirements: None.
- direction() - Method in interface nxopen.cae.optimization.TBSShapeLinkCondition
-
- direction - Variable in class nxopen.cae.Post.StreamlineExtraction
-
- DIRECTION - Static variable in class nxopen.cae.responsesimulation.SensorType
-
- Direction - Class in nxopen.cae.xyplot
-
Represents the direction option
- direction() - Method in interface nxopen.cae.xyplot.LineStyle3DSetting
-
Returns the line direction
License requirements: None.
- direction() - Method in interface nxopen.cae.xyplot.PlateStyle3DSetting
-
- direction() - Method in interface nxopen.cam.PathCircularMotion
-
Returns the direction of the arc motion
License requirements: None.
- direction() - Method in interface nxopen.cam.RoughTurningBuilder
-
Returns the Rough Direction
License requirements: None.
- direction() - Method in interface nxopen.cam.SurfaceRegions
-
Returns the direction
License requirements: None.
- direction() - Method in interface nxopen.cam.TeachmodeProfileMoveBuilder
-
Returns the direction builder
License requirements: None.
- direction() - Method in interface nxopen.cam.TurnMoveToPointBuilder
-
Returns the move direction
License requirements: None.
- direction() - Method in interface nxopen.cam.TurnProbeInspectPointMoveBuilder
-
Returns the probing direction
License requirements: None.
- direction() - Method in interface nxopen.cam.TurnRoughFinishTestCut
-
Returns the test cut direction
License requirements: None.
- direction() - Method in interface nxopen.DatumAxis
-
Returns the direction of the datum axis
License requirements: solid_modeling ("SOLIDS MODELING")
.
- Direction - Class in nxopen.diagramming
-
Represents the direction type.
- direction() - Method in interface nxopen.diagramming.PortBuilder
-
Returns the direction of the port.
- direction - Variable in class nxopen.die.CastReliefParentBuilder.CastReliefData
-
Profile direction.
- direction - Variable in class nxopen.die.ConnectProfileParentBuilder.ProfileData
-
profile direction
- direction - Variable in class nxopen.die.DeckParentBuilder.MainDeckData
-
Profile direction.
- direction() - Method in interface nxopen.die.DieDirectionBuilder
-
Returns the selected direction
License requirements: None.
- direction - Variable in class nxopen.die.DrawDiePunchBuilder.PunchProfileData
-
Profile direction.
- direction - Variable in class nxopen.die.FillBuilder.RegionBoundsData
-
Profile direction
- direction - Variable in class nxopen.die.FlangeTaskBuilder.RegionBoundsData
-
Profile direction
- direction - Variable in class nxopen.die.FormTaskBuilder.RegionBoundsData
-
Profile direction.
- direction - Variable in class nxopen.die.PadChildBuilder.ShapeData
-
Profile direction.
- direction - Variable in class nxopen.die.PierceHoleChildBuilder.PierceHoleShapeData
-
profile direction
- direction - Variable in class nxopen.die.PierceTaskBuilder.PierceBoundsData
-
Profile direction
- direction - Variable in class nxopen.die.RibChildBuilder.CenterlineData
-
Profile direction.
- direction - Variable in class nxopen.die.RotorBuilder.FlangeBendProfileData
-
Profile direction.
- direction - Variable in class nxopen.die.SteelInsertBuilder.MainProfileData
-
profile direction
- direction - Variable in class nxopen.die.TrimTaskBuilder.TrimBoundsData
-
Profile direction
- Direction - Interface in nxopen
-
Represents a direction.
- direction() - Method in interface nxopen.facet.BestFitAlignBuilder
-
Returns the plane or line direction
License requirements: None.
- direction() - Method in interface nxopen.facet.ExtrudeFacetBodyBuilder
-
- direction() - Method in interface nxopen.facet.ExtrudeProfileBuilder
-
Returns the extrude direction
License requirements: None.
- direction() - Method in interface nxopen.features.CylinderBuilder
-
Returns the cylinder direction
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- direction() - Method in interface nxopen.features.DraftBuilder
-
Returns the smart direction for draft
License requirements: solid_modeling ("SOLIDS MODELING")
.
- direction() - Method in interface nxopen.features.EmbossJoggle
-
Returns the direction for joggle
License requirements: None.
- direction() - Method in interface nxopen.features.EmbossLimit
-
Returns the direction for translation
License requirements: None.
- direction() - Method in interface nxopen.features.EmbossRegion
-
Returns the default direction
License requirements: None.
- direction() - Method in interface nxopen.features.EmbossSidewall
-
Returns the draw direction for sidewall
License requirements: None.
- direction() - Method in interface nxopen.features.ExtrudeBuilder
-
Returns the extrude direction
License requirements: None.
- direction() - Method in interface nxopen.features.IsoparametricCurvesBuilder
-
Returns the direction type
License requirements: None.
- direction() - Method in interface nxopen.features.MoveFaceBuilder
-
Returns the vector for direction and distance option, don't use it until nx502
License requirements: None.
- direction() - Method in interface nxopen.features.OffsetFaceBuilder
-
Returns the direction
License requirements: None.
- direction() - Method in interface nxopen.features.OvercrownBuilder
-
Returns the direction of deformation.
- direction() - Method in interface nxopen.features.sheetmetal.BendBuilder
-
Returns the Bend Direction
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- direction - Variable in class nxopen.features.sheetmetal.GussetBuilder.PlacementOriginAndDirectionData
-
Direction along which the placement distance is measured.
- direction() - Method in interface nxopen.features.shipdesign.PillarBuilder
-
Returns the direction of the pillar.
- direction() - Method in interface nxopen.features.shipdesign.PillarSystemBuilder
-
Returns the direction of the pillar.
- direction() - Method in interface nxopen.features.shipdesign.TraceLinesBuilder
-
Returns the direction
License requirements: None.
- direction() - Method in interface nxopen.geometricanalysis.CurveAnalysisRecord
-
- direction() - Method in interface nxopen.geometricutilities.BlendSetbackBuilder
-
Returns the direction type
License requirements: None.
- direction() - Method in interface nxopen.geometricutilities.ReduceSurfaceRadiusBuilder
-
Returns the direction which specifies concave face respect to the body face normal
License requirements: None.
- direction() - Method in interface nxopen.mechatronics.BreakingConstraintBuilder
-
Returns the direction.
- direction() - Method in interface nxopen.mechatronics.DistanceSensorBuilder
-
Returns the direction.
- direction() - Method in interface nxopen.mechatronics.VirtualAxisBuilder
-
Returns the direction
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- direction() - Method in interface nxopen.motion.BeamForceBuilder
-
Returns the direction
License requirements: None.
- direction() - Method in interface nxopen.motion.BushingDefine
-
Returns the direction
License requirements: None.
- direction() - Method in interface nxopen.motion.ControlOutputBuilder
-
Returns the control Output Variable direction.
- DIRECTION - Static variable in class nxopen.motion.CurveContactBuilder.GeometryMaterialSide
-
- direction - Variable in class nxopen.motion.PackagingMeasureBuilder.GeometryData
-
Direction tag
- direction() - Method in interface nxopen.motion.ScalarForceBuilder
-
Returns the direction
License requirements: mechanisms ("MECHANISMS")
.
- direction() - Method in interface nxopen.motion.ScalarTorqueBuilder
-
Returns the control Output Variable direction.
- direction() - Method in interface nxopen.motion.VObject
-
Returns the direction
License requirements: None.
- direction() - Method in interface nxopen.pid.Port
-
Returns the Id of the port.
- direction - Variable in class nxopen.routing.EditLineSegmentBuilder.OrientationData
-
The direction
of the line
(unit vector).
- direction - Variable in class nxopen.routing.SegmentManager.SubdivideOption
-
Direction; If direction = 1, normal curve direction
else if direction = -1, reverse the sense of curve direction
- direction - Variable in class nxopen.Section.StartAndDirectionData
-
The direction of the vector defines the direction of
the section.
- direction - Variable in class nxopen.Section.StartAndDirectionOfLoopData
-
The direction of the vector defines the direction of the loop
of the section specified by the index.
- direction() - Method in interface nxopen.sim.KinematicAxisBuilder
-
Returns the axis direction
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- direction - Variable in class nxopen.uf.UFCurve.AskIsoclineData
-
- direction - Variable in class nxopen.uf.UFCurve.SectionPerpcrvData
-
- direction - Variable in class nxopen.uf.UFGdt.LeaderSpec
-
- direction - Variable in class nxopen.uf.UFGdt.ProjZone
-
- direction - Variable in class nxopen.uf.UFModl.AskExtrudeOffsetDirData
-
- direction - Variable in class nxopen.uf.UFModl.AskExtrusionData
-
- direction - Variable in class nxopen.uf.UFModl.AskRevolutionData
-
- direction - Variable in class nxopen.uf.UFModlFeatures.AskDatumPointAndDirectionData
-
- direction - Variable in class nxopen.uf.UFMotion.VectorForceTorque
-
- direction - Variable in class nxopen.uf.UFPath.SpindleOn
-
- direction - Variable in class nxopen.uf.UFSim.AskAxisDofJunctionData
-
- direction - Variable in class nxopen.uf.UFSo.SplineData
-
- direction - Variable in class nxopen.uf.UFSubdiv.Isocline
-
- direction - Variable in class nxopen.uf.UFUi.SpecifyVectorData
-
- Direction.OnCurveOption - Class in nxopen
-
Specifies the direction in relation to a curve.
- Direction.OnFaceOption - Class in nxopen
-
Specifies the direction in relation to a face.
- direction1() - Method in interface nxopen.features.CombinedProjectionBuilder
-
Returns the combined projection direction1
License requirements: None.
- direction1 - Variable in class nxopen.uf.UFMotion.CylindricalBushing
-
- direction1 - Variable in class nxopen.uf.UFMotion.GeneralBushing
-
- direction1 - Variable in class nxopen.uf.UFMotion.Joint
-
- direction1Delta() - Method in interface nxopen.geometricutilities.PatternClocking
-
- direction1Delta() - Method in interface nxopen.geometricutilities.PatternClockingBuilder
-
Returns the x direction delta for linear clocking
License requirements: None.
- direction2() - Method in interface nxopen.features.CombinedProjectionBuilder
-
Returns the combined projection direction2
License requirements: None.
- direction2 - Variable in class nxopen.uf.UFMotion.CylindricalBushing
-
- direction2 - Variable in class nxopen.uf.UFMotion.GeneralBushing
-
- direction2 - Variable in class nxopen.uf.UFMotion.Joint
-
- direction2Delta() - Method in interface nxopen.geometricutilities.PatternClocking
-
- direction2Delta() - Method in interface nxopen.geometricutilities.PatternClockingBuilder
-
Returns the y direction delta for linear clocking
License requirements: None.
- DIRECTION_CLOCKWISE - Static variable in class nxopen.uf.UFPath.Direction
-
- DIRECTION_COUNTER_CLW - Static variable in class nxopen.uf.UFPath.Direction
-
- DIRECTION_FEATURE - Static variable in class nxopen.annotations.FeatureControlFrameIndicatorBuilder.FcfIndicatorType
-
- DIRECTION_LAST_ELEMENT - Static variable in class nxopen.uf.UFPath.Direction
-
- DIRECTION_NONE - Static variable in class nxopen.uf.UFPath.Direction
-
- DIRECTION_REVERSE - Static variable in class nxopen.motion.CurveContactBuilder.GeometryMaterialSide
-
- DIRECTION_X - Static variable in class nxopen.geometricutilities.TransformerData.ObjectType
-
- DIRECTION_Y - Static variable in class nxopen.geometricutilities.TransformerData.ObjectType
-
- DIRECTION_Z - Static variable in class nxopen.geometricutilities.TransformerData.ObjectType
-
- directional() - Method in interface nxopen.cam.CleanupSettings
-
Returns the Directional, Cleanup Geometry Settings
License requirements: None.
- directionAsString() - Method in interface nxopen.blockstyler.OrientXpress
-
Returns the Direction as string
License requirements: None.
- directionAtPoint() - Method in interface nxopen.geometricutilities.BridgeCurveConnectivity
-
Returns the direction at point
License requirements: None.
- directionAxis() - Method in interface nxopen.weld.DatumCommonBuilder
-
Returns the direction axis.
- directionAxisType() - Method in interface nxopen.cam.DmRotaryFloorFinishBuilder
-
Returns the direction axis type
License requirements: None.
- DirectionCollection - Interface in nxopen
-
- directionCsys() - Method in interface nxopen.cae.LaminateDrapingDataBuilder
-
Returns the draping direction coordinate system
License requirements: None.
- directionData - Variable in class nxopen.uf.UFModl.RefitFaceData
-
- DirectionDataComponent - Class in nxopen.cae.responsesimulation
-
Specifies the direction data components
- directionFeatureType() - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
Returns the direction feature indicator enum
License requirements: None.
- directionFlag() - Method in interface nxopen.features.DivideCurveBuilder
-
Returns the input arc length direction flag
License requirements: None.
- directionLength() - Method in interface nxopen.weld.DatumCommonBuilder
-
Returns the length of the datum axis vector created.
- directionObject() - Method in interface nxopen.SketchMirrorPatternBuilder
-
Returns the direction object.
- directionOfInterface() - Method in interface nxopen.ame.MountingInterfaceBuilder
-
Returns the direction of interface
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- directionOption() - Method in interface nxopen.cae.LaminateDrapingDataBuilder
-
Returns the draping direction option
License requirements: None.
- directionOption() - Method in interface nxopen.cae.responsesimulation.VelocityImpactDirection
-
Returns the direction option
License requirements: None.
- DirectionOption - Class in nxopen.die
-
Settings for the profile direction.
- directionOption() - Method in interface nxopen.features.CircularBlendCurveBuilder
-
- directionOption() - Method in interface nxopen.features.EmbossJoggle
-
Returns the emboss joggle direction option
License requirements: None.
- directionOption() - Method in interface nxopen.features.FitSurfaceBuilder
-
Returns the direction option
License requirements: None.
- directionOption() - Method in interface nxopen.features.subdivision.SubdivisionExtrudeCageBuilder
-
Returns the direction option
License requirements: None.
- directionOption() - Method in interface nxopen.features.TrimCurve2Builder
-
Returns the direction type
License requirements: None.
- directionOption() - Method in interface nxopen.geometricanalysis.CurveAnalysisCombsBuilder
-
- directionOption() - Method in interface nxopen.geometricanalysis.CurveAnalysisInflectionsBuilder
-
- directionOption() - Method in interface nxopen.geometricanalysis.CurveAnalysisPeaksBuilder
-
- directionOption() - Method in interface nxopen.geometricanalysis.CurveAnalysisRecord
-
- directionOption() - Method in interface nxopen.tooling.DieEngTrimAngleCheckBuilder
-
Returns the option to set the method of defining trimming direction
License requirements: None.
- directionOrientation() - Method in interface nxopen.features.DatumAxisBuilder
-
Returns the direction orientation.
- directionPoint() - Method in interface nxopen.cae.connections.LocationWithDir
-
Returns the point of the direction definition end point.
- directionReverse() - Method in interface nxopen.tooling.EdgePatchBuilder
-
Reverse reference face direction.
- directions() - Method in interface nxopen.BasePart
-
Returns the DirectionCollection instance belonging to this part .
- directions - Variable in class nxopen.uf.UFModlGeneral.AskBoundingBoxAlignedData
-
- directions - Variable in class nxopen.uf.UFModlGeneral.AskBoundingBoxExactData
-
- DIRECTIONS_ARE_COPLANAR - Static variable in class nxopen.uf.UFConstants
-
- DirectionsData() - Constructor for class nxopen.CoordinateSystem.DirectionsData
-
- DirectionsData() - Constructor for class nxopen.drawings.FlatPatternObject.DirectionsData
-
- directionSpecifiedEnum() - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder
-
Returns the type of direction specified (direction vector or radial)
License requirements: None.
- directionStruct - Variable in class nxopen.uf.UFCurve.CombineCurvesDirection
-
- DirectionStructU() - Constructor for class nxopen.uf.UFCurve.DirectionStructU
-
- DirectionStructU(double[]) - Constructor for class nxopen.uf.UFCurve.DirectionStructU
-
- directionTag - Variable in class nxopen.uf.UFModlFeatures.AskTaperFromEdges1Data
-
- directionTag - Variable in class nxopen.uf.UFModlFeatures.AskTaperFromEdgesData
-
- directionType() - Method in interface nxopen.cae.BeamSectionOrientationOptions
-
Returns the direction type
License requirements: None.
- directionType() - Method in interface nxopen.cae.connections.LocationWithDir
-
Returns the direction type
License requirements: nx_masterfem ("Finite Element Modeling")
.
- directionType() - Method in interface nxopen.cae.UserDefinedSolidBeamSectionBuilder
-
Returns the option to define reference vector
License requirements: None.
- directionType() - Method in interface nxopen.cam.GeometryGroup
-
Returns the derived blank orientation type
License requirements: None.
- directionType() - Method in interface nxopen.cam.ProbeInspectPointMoveBuilder
-
Returns the probing direction
License requirements: None.
- directionType() - Method in interface nxopen.cam.ProbeInspectSurfacePointMoveBuilder
-
Returns the direction type
License requirements: None.
- directionType() - Method in interface nxopen.drawings.BrokenViewBuilder
-
Returns the direction type
License requirements: None.
- directionType() - Method in interface nxopen.features.sheetmetal.JogBuilder
-
Returns
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- directionType() - Method in interface nxopen.features.shipdesign.PenetrationAssociationBuilder
-
Returns the direction
License requirements: None.
- directionType() - Method in interface nxopen.features.shipdesign.PenetrationCutoutBuilder
-
Returns the direction type
License requirements: None.
- directionType() - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder
-
Returns the direction
License requirements: None.
- directionType() - Method in interface nxopen.geometricutilities.HelixPattern
-
Returns the type of helix direction method
License requirements: None.
- directionType() - Method in interface nxopen.geometricutilities.SpiralPattern
-
Returns the type of spiral direction method
License requirements: None.
- directionType() - Method in interface nxopen.mechatronics.PositionControlBuilder
-
Returns the direction type, which works only when the position control is used to
drive
TransportSurface
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
Created in NX10.0.0
- directionType() - Method in interface nxopen.mechatronics.SpeedControlBuilder
-
Returns the direction type, which works only when the speed control is used to
drive
TransportSurface
License requirements: None.
- directionType - Variable in class nxopen.uf.UFCurve.CombineCurvesDirection
-
- directionValue() - Method in interface nxopen.cae.connections.LocationWithDir
-
Returns the direction value
License requirements: nx_masterfem ("Finite Element Modeling")
.
- directionVec - Variable in class nxopen.uf.UFBound.MemberData
-
- directionVector() - Method in interface nxopen.Axis
-
Returns the direction vector
License requirements: None.
- directionVector() - Method in interface nxopen.cae.connections.LocationWithDir
-
Returns the direction definition vector
License requirements: nx_masterfem ("Finite Element Modeling")
.
- directionVector() - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder
-
Returns the direction vector
License requirements: None.
- directionVector() - Method in interface nxopen.drawings.BrokenViewBuilder
-
Returns the direction vector.
- directionVector() - Method in interface nxopen.features.AOCSBuilder
-
Returns the offset diection vector
License requirements: solid_modeling ("SOLIDS MODELING") OR insp_programming ("INSPECTION PROGRAMMING")
.
- directionVector1() - Method in interface nxopen.weld.FilletBuilder
-
Returns the face normal direction.
- directionVector2() - Method in interface nxopen.weld.FilletBuilder
-
Returns the face normal direction for the second face.
- directionView() - Method in interface nxopen.annotations.DimensionMeasurementBuilder
-
- DIRECTIVITY - Static variable in class nxopen.cae.xyplot.ComplexOption2D
-
Directivity for 2D plot
- directOpenSimulation(String) - Method in interface nxopen.motion.MotionSession
-
- DIRECTORY - Static variable in class nxopen.tooling.RenameAndExportComponentBuilder.DefinitionType
-
- directOwner() - Method in interface nxopen.assemblies.Component
-
- directToggle() - Method in interface nxopen.weld.FilletBuilder
-
Returns the toggle to change direction.
- directTrimPoint() - Method in interface nxopen.cam.TurnEngageRetractBuilder
-
- DirectUnbendBuilder - Interface in nxopen.tooling
-
The builder contains all inputs for direct unbend.
- DirectUnbendBuilder.Bendtypes - Class in nxopen.tooling
-
unbend operations.
- directUnfold() - Method in interface nxopen.tooling.ToolingManager
-
Returns the DirectUnfold instance belonging to this part .
- DirectUnfoldBuilder - Interface in nxopen.tooling
-
The builder contains all inputs for direct unfolding.
- DirectUnfoldBuilder.Bend - Class in nxopen.tooling
-
The number of children bends in defining prebend.
- DirectUnfoldBuilder.BodyList - Class in nxopen.tooling
-
The name list of bodies in current part.
- DirectUnfoldBuilder.MatType - Class in nxopen.tooling
-
The material database defined in PDW.
- DirectUnfoldBuilder.Types - Class in nxopen.tooling
-
Specifies the option of direct unfold type
- DirectUnfoldCollection - Interface in nxopen.tooling
-
- dirList - Variable in class nxopen.uf.UFAssem.AskSearchDirectoriesData
-
- dirMethod - Variable in class nxopen.uf.UFModl.SmslotData
-
- dirOrEndPt - Variable in class nxopen.facet.FacetedEdge.CurveData
-
- dirpath() - Method in interface nxopen.UFSession
-
- dirPt1 - Variable in class nxopen.uf.UFCurve.Bcmmcp
-
- dirPt2 - Variable in class nxopen.uf.UFCurve.Bcmmcp
-
- DIRR_ON_CURVE_BINORMAL - Static variable in class nxopen.uf.UFSo.DirrOnCurveOption
-
- DIRR_ON_CURVE_NORMAL - Static variable in class nxopen.uf.UFSo.DirrOnCurveOption
-
- DIRR_ON_CURVE_TANGENT - Static variable in class nxopen.uf.UFSo.DirrOnCurveOption
-
- dirRef - Variable in class nxopen.uf.UFModeling.AskLinkFacesData
-
- DirrOnSurfData() - Constructor for class nxopen.uf.UFSo.DirrOnSurfData
-
- DirrOnSurfData(Tag, Tag[], int, Tag, boolean) - Constructor for class nxopen.uf.UFSo.DirrOnSurfData
-
- dirs - Variable in class nxopen.uf.UFDirpath.AskDirsData
-
- dirVec() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
Returns the selected vector for tolerance direction
License requirements: None.
- dirX - Variable in class nxopen.uf.UFModeling.AskFeatDirectionData
-
- dirY - Variable in class nxopen.uf.UFModeling.AskFeatDirectionData
-
- disable() - Method in interface nxopen.presslinesimulation.HydraulicLifterBuilder
-
Returns the disable status of the motion.
- disable() - Method in interface nxopen.presslinesimulation.LinearCamBuilder
-
Returns the disable status of the cam.
- disable() - Method in interface nxopen.presslinesimulation.RotaryCamBuilder
-
Returns the disable status of the cam.
- disable() - Method in interface nxopen.presslinesimulation.UserMotionBuilder
-
Returns the disabled status of the motion.
- DISABLE_SPECIFIC - Static variable in class nxopen.Selection.SelectionAction
-
Remove selected objects from selection
- disableAbort() - Method in interface nxopen.uf.UFAbort
-
- DISABLED - Static variable in class nxopen.display.Shadows.RealTimeState
-
Realtime is disabled
- DISABLED - Static variable in class nxopen.PartCollection.MultipleDisplayedPartStatus
-
Indicates that only one part can be displayed at a time.
- DISABLED - Static variable in class nxopen.preferences.ObjectPreferences.Translucency
-
- disabled() - Method in interface nxopen.presslinesimulation.CushionControlBuilder
-
Returns the disable status.
- disabled() - Method in interface nxopen.validate.ResultObject
-
Returns the disabled status of check result.
- DISABLED_BY_CUSTOMER - Static variable in class nxopen.PartCollection.MultipleDisplayedPartStatus
-
Indicates that only one part can be displayed at a time.
- disableLoadCondition(String) - Method in interface nxopen.cae.SimLoadRecipe
-
Disables a load condition in the Load Recipe.
- disableMiscCbs() - Method in interface nxopen.uf.UFUndo
-
- disableQuickAccess() - Method in interface nxopen.uf.UFUi
-
- disableRaytracing - Variable in class nxopen.uf.UFDisp.ShadeOptions
-
- disableTrackingValue(String) - Method in interface nxopen.cae.SimLoadRecipe
-
Disables a tracking value in the Load Recipe.
- DISALLOW - Static variable in class nxopen.blockstyler.Tree.BeginLabelEditState
-
Use this option to disallow label edit.
- DISASSEMBLY - Static variable in class nxopen.linedesigner.ConveyorStationFeatureBuilder.Type
-
- disassocFromSolid(Tag) - Method in interface nxopen.uf.UFFacet
-
- DISC - Static variable in class nxopen.uf.UFModl.BlendRadiusTypes
-
- DISCARD - Static variable in class nxopen.features.sheetmetal.AeroFlangeBuilder.DirType
-
Discard Direction Type
- DISCARD - Static variable in class nxopen.features.TrimCurve2Builder.KeepDiscard
-
- DISCARD - Static variable in class nxopen.features.TrimSheetBuilder.KeepDiscardOption
-
Selected region will be discarded.
- DISCARD - Static variable in class nxopen.SketchAssociativeTrimBuilder.TrimOption
-
Selected region will be discarded.
- DISCARD - Static variable in class nxopen.tooling.EnlargeSurfaceBuilder.KeepDiscardOption
-
selected region will be discarded.
- DISCARD - Static variable in class nxopen.tooling.TrimRegionBuilder.RegionOption
-
selected region will be discarded.
- discardChanges() - Method in interface nxopen.issue.IssueList
-
Discards the modified
IssueContent
s
License requirements: nx_issue_mgmt ("NX Issue Tracking")
Created in NX8.5.0
- discardIssue() - Method in interface nxopen.issue.IssueContent
-
Discards the newly created issue which has not saved in external db yet
License requirements: nx_issue_mgmt ("NX Issue Tracking")
.
- discipline() - Method in interface nxopen.diagramming.ConnectionBuilder
-
Returns the discipline of this connection.
- discipline() - Method in interface nxopen.drafting.DrawingCreationWizardBuilder
-
Returns the discipline.
- discipline() - Method in interface nxopen.pid.Port
-
Returns the Id of the port.
- disciplineChangedPlugin(String, String) - Method in interface nxopen.routing.CustomManager.DisciplineChangedPlugin
-
This defines the prototype for the Discipline Changed plugin.
- DisclosedModelViewsAndPurposesData() - Constructor for class nxopen.ViewCollection.DisclosedModelViewsAndPurposesData
-
- disclosedviews - Variable in class nxopen.ViewCollection.DisclosedModelViewsAndPurposesData
-
- disclosurePurpose() - Method in interface nxopen.View
-
Returns the Disclosure Purpose.
- disclosurepurposes - Variable in class nxopen.ViewCollection.DisclosedModelViewsAndPurposesData
-
- disconnect(AMEPort) - Method in interface nxopen.ame.AMEPort
-
Disconnets lhs from rhs port
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- disconnect(boolean) - Method in interface nxopen.ame.AMEPort
-
Disconnects given port
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- disconnect(IPort[], IPort[]) - Method in interface nxopen.ame.BulkConnectionBuilder
-
Disconnect the Connections
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- disconnect() - Method in interface nxopen.ame.ObjectConnectionBuilder
-
Disconnect the current connection
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- disconnect(NXObject, NXObject) - Method in interface nxopen.ame.PortConnectionBuilder
-
Disconnects given ports each other
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- disconnect(NXObject) - Method in interface nxopen.ame.PortConnectionBuilder
-
Disconnects given port
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- disconnect(NXObject) - Method in interface nxopen.ame.PortsManagerBuilder
-
Disconnects port
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- disconnect() - Method in interface nxopen.issue.IssueManager
-
Disconnects from issue server
License requirements: nx_issue_mgmt ("NX Issue Tracking")
.
- disconnect() - Method in interface nxopen.routing.Port
-
- disconnectAllViewports() - Method in interface nxopen.cae.ViewportSynchronizationOptions
-
Disconnects all viewports.
- disconnectConnection(Connection) - Method in interface nxopen.ame.DiagramManager
-
Detach Diagramming Connection
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- DisconnectConnectionBuilder - Interface in nxopen.linedesigner
-
To create a new instance of this class, use nxopen.linedesigner.LineDesignerManager#createDisconnectConnectionBuilder
Created in NX10.0.0
- disconnectFromEngineeringObject() - Method in interface nxopen.ame.CabinetComponentNode
-
Disconnects Cabinet Component from Engineering Object
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- disconnectPort(Tag) - Method in interface nxopen.uf.UFRoute
-
- disconnectViewport(int) - Method in interface nxopen.cae.ViewportSynchronizationOptions
-
The given viewport stops reacting to selections in other viewports.
- discontinuities() - Method in interface nxopen.fields.FieldLinksTable
-
Returns a flag specifying if the table has discontinuites
License requirements: None.
- discontinuities() - Method in interface nxopen.fields.FieldTable
-
Returns a flag specifying if the table has discontinuites
License requirements: None.
- DISCONTINUITY - Static variable in class nxopen.cae.Result.ComputationType
-
discontinuity based on discontinuity option
- DISCONTINUITY - Static variable in class nxopen.routing.Corner.Type
-
Discontinuity corner.
- DiscontinuityCorner - Interface in nxopen.routing
-
A discontinuity corner is a corner that forces
Stock
objects
to split as they cover the segments attached to the discontinuity corner.
- discontinuityCorner() - Method in interface nxopen.routing.RemoveDiscontinuityBuilder
-
Returns the selected
RouteObjectCollector
which contains
discontinuity corner
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
Created in NX7.5.0
- DiscontinuityCornerCollection - Interface in nxopen.routing
-
- discontinuityCorners() - Method in interface nxopen.routing.RouteManager
-
DiscontinuityCorner collection .
- DISCREPANCY - Static variable in class nxopen.routing.Run.CompareStatus
-
Items have characteristics discrepancies
- discrepancyObjectType() - Method in interface nxopen.formboard.UpdateDiscrepancy
-
Returns the type of object referenced by the discrepancy.
- discrepancyType() - Method in interface nxopen.formboard.UpdateDiscrepancy
-
Returns the general type of the discrepancy.
- discriminator - Variable in class nxopen.pdm.PdmSession.TcserverSettingsData
-
the discriminator
- disjointList - Variable in class nxopen.uf.UFModeling.CreateMultipleSewsData
-
- disjointList - Variable in class nxopen.uf.UFModeling.CreateSewData
-
- disjointRestart - Variable in class nxopen.cae.Post.StreamlineExtraction
-
- DISK - Static variable in class nxopen.cam.InspectionMoveBuilder.ProbeTipTypes
-
Disk tip
- DISK - Static variable in class nxopen.cam.InspectionProbeTrackingBuilder.TipTypes
-
Disk
- DISK - Static variable in class nxopen.cam.InspectionSensorBuilder.SensorTipTypes
-
Disk
- DISK_FACE_BLEND - Static variable in class nxopen.die.AddendumSectionBuilder.SurfaceBuildType
-
Create disc blend surface.
- DISK_FACE_BLEND - Static variable in class nxopen.die.AddSurfBuilder.Methods
-
Disk type face blend.
- dismissDialogArea2() - Method in interface nxopen.uf.UFUi
-
- disp() - Method in interface nxopen.UFSession
-
- DISP2PT_ARC_MARKER - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- DISP2T_DC_SPOT_WELD - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- DISP2T_GENERAL_SPOT_WELD - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- DISP2T_IMPORTANT_SPOT_WELD - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- DISP2T_KPC_SPOT_WELD - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- DISP2T_PROC_SPOT_WELD - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- DISP2T_RES_SPOT_WELD - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- DISP2T_SEMIPANEL_SPOT_WELD - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- DISP2T_VITAL_SPOT_WELD - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- DISP3T_DC_SPOT_WELD - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- DISP3T_GENERAL_SPOT_WELD - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- DISP3T_IMPORTANT_SPOT_WELD - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- DISP3T_KPC_SPOT_WELD - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- DISP3T_PROC_SPOT_WELD - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- DISP3T_RES_SPOT_WELD - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- DISP3T_SEMIPANEL_SPOT_WELD - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- DISP3T_VITAL_SPOT_WELD - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- DISP4T_DC_SPOT_WELD - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- DISP4T_GENERAL_SPOT_WELD - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- DISP4T_IMPORTANT_SPOT_WELD - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- DISP4T_KPC_SPOT_WELD - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- DISP4T_PROC_SPOT_WELD - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- DISP4T_RES_SPOT_WELD - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- DISP4T_SEMIPANEL_SPOT_WELD - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- DISP4T_VITAL_SPOT_WELD - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- dispContact() - Method in interface nxopen.cam.DmBndBuilder
-
Returns the Display Contact
License requirements: None.
- dispContactNormal() - Method in interface nxopen.cam.DmBndBuilder
-
Returns the Display Contact Normal
License requirements: None.
- dispCS() - Method in interface nxopen.cae.AssignNodalCSBuilder
-
Returns the disp cs
License requirements: None.
- dispCSType() - Method in interface nxopen.cae.AssignNodalCSBuilder
-
Returns the disp cstype
License requirements: None.
- dispCsys() - Method in interface nxopen.cae.NodeCreateBuilder
-
Returns the dispCsys
License requirements: None.
- dispCsys() - Method in interface nxopen.cae.NodeModifyLabelBuilder
-
Returns the disp csys
License requirements: None.
- displacement() - Method in interface nxopen.assemblies.PlaneSearchTermBuilder
-
Returns
the displacement of the plane from the origin.
- DISPLACEMENT - Static variable in class nxopen.bodydes.OnestepUnformBuilder.DisplaySpringbackMode
-
Onestep display springback mode is displacement
- DISPLACEMENT - Static variable in class nxopen.cae.DisplayNodalCsysBuilder.DisplayNodalCsysType
-
- DISPLACEMENT - Static variable in class nxopen.cae.FrfSet.Measure
-
Displacement
- DISPLACEMENT - Static variable in class nxopen.cae.responsesimulation.EvaluationResultType
-
- DISPLACEMENT - Static variable in class nxopen.cae.responsesimulation.SensorResultType
-
- DISPLACEMENT - Static variable in class nxopen.cae.responsesimulation.TransmissibilityEvaluationSettingBuilder.MotionType
-
- DISPLACEMENT - Static variable in class nxopen.cae.Result.Quantity
-
- DISPLACEMENT - Static variable in class nxopen.cae.XyFunctionMeasure
-
Displacement unit
- displacement - Variable in class nxopen.motion.ArticulationControl.ArticulationJointsDisplacementData
-
The articulation joint displacement value within current step
- DISPLACEMENT - Static variable in class nxopen.motion.ControlInputPortBuilder.MeasuredVariable
-
Displacement
- DISPLACEMENT - Static variable in class nxopen.motion.DriverMotionsData.DriverDataType
-
Displacement
- DISPLACEMENT - Static variable in class nxopen.motion.DriverOperation.IntegrationType
-
Displacement
- DISPLACEMENT - Static variable in class nxopen.motion.GraphBuilder.RequestChoices
-
Deprecated.
Displacement
- DISPLACEMENT - Static variable in class nxopen.motion.MotionSensorBuilder.Types
-
displacement sensor type
- displacement - Variable in class nxopen.uf.UFMotion.JointMotionInput
-
- DISPLACEMENT_ABSOLUTE - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
-
Absolute nodal displacement
- DISPLACEMENT_ABSOLUTE_MODAL - Static variable in class nxopen.cae.Result.Quantity
-
- DISPLACEMENT_ANGSTROM - Static variable in class nxopen.cae.XyFunctionUnit
-
Displacement unit: angstrom
- DISPLACEMENT_CM - Static variable in class nxopen.cae.XyFunctionUnit
-
Displacement unit: centimeters (126)
- DISPLACEMENT_CS - Static variable in class nxopen.cae.AssignNodalCSBuilder.Cs
-
displacement only
- DISPLACEMENT_FT - Static variable in class nxopen.cae.XyFunctionUnit
-
Displacement unit: ft
- DISPLACEMENT_IN - Static variable in class nxopen.cae.XyFunctionUnit
-
Displacement unit: in
- DISPLACEMENT_KM - Static variable in class nxopen.cae.XyFunctionUnit
-
Displacement unit: km
- DISPLACEMENT_LEVEL_CROSSING_RATE - Static variable in class nxopen.cae.Result.Quantity
-
- DISPLACEMENT_M - Static variable in class nxopen.cae.XyFunctionUnit
-
Displacement unit: m
- DISPLACEMENT_MAGNITUDE - Static variable in class nxopen.cae.Result.Quantity
-
- DISPLACEMENT_MI - Static variable in class nxopen.cae.XyFunctionUnit
-
Displacement unit: mi
- DISPLACEMENT_MICRON - Static variable in class nxopen.cae.XyFunctionUnit
-
Displacement unit: micron
- DISPLACEMENT_MM - Static variable in class nxopen.cae.XyFunctionUnit
-
Displacement unit: mm
- DISPLACEMENT_NM - Static variable in class nxopen.cae.XyFunctionUnit
-
Displacement unit: nm
- DISPLACEMENT_X - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
-
Nodal displacement in X-direction
- DISPLACEMENT_XABSOLUTE - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
-
Absolute nodal displacement in X-direction
- DISPLACEMENT_Y - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
-
Nodal displacement in Y-direction
- DISPLACEMENT_YABSOLUTE - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
-
Absolute nodal displacement in Y-direction
- DISPLACEMENT_Z - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
-
Nodal displacement in Z-direction
- DISPLACEMENT_ZABSOLUTE - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
-
Absolute nodal displacement in Z-directionm
- displacementCsys() - Method in interface nxopen.cae.FENode
-
Returns the nodes displacement coordinate system or null if it is the absolute coordinate system
License requirements: None.
- DISPLACEMENTCURVE - Static variable in class nxopen.motion.JointDefine.ScrewJointMethodType
-
Displacement curve method
- displacementExpression() - Method in interface nxopen.motion.DriverOperation
-
Returns the displacement expression
License requirements: None.
- displacementStepSize() - Method in interface nxopen.cae.optimization.TBSShapeOptimizationParameters
-
Returns the step size option for modifying the displacement during the optimization operation
License requirements: None.
- displacementunit - Variable in class nxopen.motion.ArticulationControl.ArticulationJointsDisplacementData
-
The articulation joint displacement unit
- displaceMethod1 - Variable in class nxopen.uf.UFCurve.Bcmmcp
-
- displaceMethod2 - Variable in class nxopen.uf.UFCurve.Bcmmcp
-
- display() - Method in interface nxopen.cae.SelectionRecipe
-
Returns the display attributes belonging to the Selection Recipe .
- display() - Method in interface nxopen.drawings.ViewSectionLineBuilder
-
Returns the display
License requirements: None.
- display() - Method in interface nxopen.PartCollection
-
Returns the currently active display part of the session.
- DISPLAY - Static variable in class nxopen.tooling.QuickQuotationBuilder.ManageTemporaryObjectsTypes
-
- DISPLAY - Static variable in class nxopen.uf.UFDisp.Context
-
- display - Variable in class nxopen.uf.UFDisp.ShadeOptions
-
- display(Tag, int, int, int) - Method in interface nxopen.uf.UFSo
-
- DISPLAY - Static variable in class nxopen.userdefinedobjects.UserDefinedEvent.Reason
-
Display UDO event
- DISPLAY_AND_EMPHASIZE - Static variable in class nxopen.preferences.SessionDrafting.EdgeFaceDisplayType
-
- DISPLAY_ARROW1 - Static variable in class nxopen.uf.UFDrf.ArrowDisplay
-
- DISPLAY_ARROW2 - Static variable in class nxopen.uf.UFDrf.ArrowDisplay
-
- DISPLAY_CONTINUATION_NOTE_ABOVE - Static variable in class nxopen.uf.UFTabnot.DisplayContinuationNote
-
- DISPLAY_CONTINUATION_NOTE_BELOW - Static variable in class nxopen.uf.UFTabnot.DisplayContinuationNote
-
- DISPLAY_CONTINUATION_NOTE_NONE - Static variable in class nxopen.uf.UFTabnot.DisplayContinuationNote
-
- DISPLAY_EXT_LINE1 - Static variable in class nxopen.uf.UFDrf.ExtensionLineDisplay
-
- DISPLAY_EXT_LINE2 - Static variable in class nxopen.uf.UFDrf.ExtensionLineDisplay
-
- DISPLAY_FS_RGB - Static variable in class nxopen.uf.UFDisp.ShadeDisplay
-
- DISPLAY_FS_RGB_PLUS_NOISE - Static variable in class nxopen.uf.UFDisp.ShadeDisplay
-
- DISPLAY_GRAY_SCALE - Static variable in class nxopen.uf.UFDisp.ShadeDisplay
-
- DISPLAY_IF_NOT_PASS - Static variable in class nxopen.validate.ValidatorOptions.ResultsDisplayModeTypes
-
Display results if the checking is not passed.
- DISPLAY_IN_COLUMN - Static variable in class nxopen.annotations.HoleTableSettingsFormatBuilder.SizeFormatType
-
Display in Column
- DISPLAY_IN_SUMMARY_ROWS - Static variable in class nxopen.annotations.HoleTableSettingsFormatBuilder.SizeFormatType
-
Display in Summary Rows
- DISPLAY_MOM_EVENT - Static variable in class nxopen.sim.SimDebugBuilder.UiType
-
Display Mom Event
- DISPLAY_MONOCHROME - Static variable in class nxopen.uf.UFDisp.ShadeDisplay
-
- DISPLAY_NEAREST_RGB - Static variable in class nxopen.uf.UFDisp.ShadeDisplay
-
- DISPLAY_NO_ARROWS - Static variable in class nxopen.uf.UFDrf.ArrowDisplay
-
- DISPLAY_NO_EXT_LINE - Static variable in class nxopen.uf.UFDrf.ExtensionLineDisplay
-
- DISPLAY_ONLY - Static variable in class nxopen.BasePart.BookmarkOption
-
Write only display attributes
- DISPLAY_ORDERED_DITHER - Static variable in class nxopen.uf.UFDisp.ShadeDisplay
-
- DISPLAY_PART - Static variable in class nxopen.Catiav5Creator.ExportFromOption
-
export data from displayed part
- DISPLAY_PART - Static variable in class nxopen.DxfdwgCreator.ExportFromOption
-
export data from displayed part
- DISPLAY_PART - Static variable in class nxopen.features.vehicledesign.BaseDataSourceBuilder.BaseDataSourceOption
-
- DISPLAY_PART - Static variable in class nxopen.IgesCreator.ExportFromOption
-
export data from displayed part
- DISPLAY_PART - Static variable in class nxopen.NXTo2dCreator.ExportFromOption
-
export data from displayed part
- DISPLAY_PART - Static variable in class nxopen.Step203Creator.ExportFromOption
-
Deprecated.
export data from displayed part
- DISPLAY_PART - Static variable in class nxopen.Step214Creator.ExportFromOption
-
Deprecated.
export data from displayed part
- DISPLAY_PART - Static variable in class nxopen.StepCreator.ExportFromOption
-
export data from displayed part
- DISPLAY_RGB_PLUS_NOISE - Static variable in class nxopen.uf.UFDisp.ShadeDisplay
-
- DISPLAY_SXLINE - Static variable in class nxopen.uf.UFDraw.SxlineDisplay
-
- DISPLAY_TC_PLUS_NOISE - Static variable in class nxopen.uf.UFDisp.ShadeDisplay
-
- DISPLAY_TWO_ARROWS - Static variable in class nxopen.uf.UFDrf.ArrowDisplay
-
- DISPLAY_TWO_EXT_LINES - Static variable in class nxopen.uf.UFDrf.ExtensionLineDisplay
-
- DISPLAY_UPDATE - Static variable in class nxopen.sim.IsvControlPanelBuilder.SingleStepModeType
-
Display
- DisplayableObject - Interface in nxopen
-
Base class for all objects that are displayable.
- DisplayableObject.ObjectFont - Class in nxopen
-
specifies the object font for objects such as lines .
- DisplayableObject.ObjectWidth - Class in nxopen
-
specifies object width for objects such as lines and text .
- displayAbsoluteRotationScreenSizeStandardText(int, String, Point3d, UserDefinedObjectDisplayContext.StandardTextRef, String, UserDefinedObjectDisplayContext.TextSize) - Method in interface nxopen.userdefinedobjects.UserDefinedObjectDisplayContext
-
Displays a single line "Standard Text" string using "Absolute Rotation and Screen
Size Geometry" for a
UserDefinedObject
.
- displayAbsoluteStandardText(int, String, Point3d, UserDefinedObjectDisplayContext.StandardTextRef, String, double, double) - Method in interface nxopen.userdefinedobjects.UserDefinedObjectDisplayContext
-
Displays a single line "Standard Text" string using "Absolute Geometry" for a
UserDefinedObject
.
- displayAlertsOnInformation() - Method in interface nxopen.preferences.SessionUserInterfaceUI
-
Returns the option "Display Alerts on Information" gives choice, whether the
user wants the Diagnostic alerts appear when
features contain information messages during feature
creation, edit, and update.
- displayAlertsOnWarnings() - Method in interface nxopen.preferences.SessionUserInterfaceUI
-
Returns the option "Display Alerts on Warnings" gives choice, whether the
user wants the Diagnostic alerts appear when
features contain warnings during feature
creation, edit, and update.
- displayAllTextInUpperCase() - Method in interface nxopen.annotations.HoleTableSettingsFormatBuilder
-
Returns the display all text in upper case
License requirements: None.
- DISPLAYAND_EMPHASIZE - Static variable in class nxopen.drawings.ViewWorkflowBuilder.Display
-
- displayAngle(NXObject, Point3d, NXObject, Point3d) - Method in interface nxopen.Measurement
-
Calculates and displays 'Angle' between objects.
- displayAppearance() - Method in interface nxopen.preferences.ViewVisualizationVisual
-
Returns the rendering style and the edge display options of the view.
- DisplayAppearanceOptions() - Constructor for class nxopen.preferences.ViewVisualizationVisual.DisplayAppearanceOptions
-
- DisplayAppearanceOptions(ViewVisualizationVisual.RenderingStyle, ViewVisualizationVisual.HiddenEdges, boolean, boolean, int, ViewVisualizationVisual.SmoothEdgeFont, ViewVisualizationVisual.SmoothEdgeWidth, double) - Constructor for class nxopen.preferences.ViewVisualizationVisual.DisplayAppearanceOptions
-
Constructor for the DisplayAppearanceOptions object.
- displayArc(Point3d, Matrix3x3, double, double, double) - Method in interface nxopen.userdefinedobjects.UserDefinedObjectDisplayContext
-
- displayArcLength(DisplayableObject[]) - Method in interface nxopen.Measurement
-
Calculates and displays 'Total Arc Length' of all the selected objects.
- displayArcLengthBetweenPoints(Point, Point) - Method in interface nxopen.Measurement
-
Calculates and displays the arc length between two points on curves.
- displayArrowOnParentView() - Method in interface nxopen.drawings.ViewProjectedViewSettingsBuilder
-
Returns the display arrow on parent view
License requirements: None.
- displayAsPmi() - Method in interface nxopen.features.EditDimensionBuilder
-
Returns the display as pmi flag
License requirements: None.
- displayAsSingleSided() - Method in interface nxopen.annotations.SingleSidedDisplayBuilder
-
Returns the display as single sided
License requirements: None.
- displayAutoDimensions() - Method in interface nxopen.preferences.SessionSketch
-
Returns the setting that controls whether or not to display auto dimensions
License requirements: None.
- displayBanner() - Method in interface nxopen.PlotBuilder
-
Returns the display banner.
- displayBeamResultInLocalCsys - Variable in class nxopen.cae.Result.ResultParameters
-
Deprecated.
- displayBitmapLabel() - Method in interface nxopen.blockstyler.Label
-
Returns the DisplayBitmapLabel
License requirements: None.
- displayBoltHoleCenterline() - Method in interface nxopen.cae.MeshCollectorDisplayDefaults2d
-
Returns the element plane stress bolt-hole centerline display setting.
- displayBoltHoleCenterline() - Method in interface nxopen.cae.MeshDisplaySettings2d
-
Returns the plane stress bolt-hole centerline display setting.
- displayBorders() - Method in interface nxopen.drawings.ViewWorkflowBuilder
-
Returns the display view borders on the the drawing
License requirements: None.
- displayBorders() - Method in interface nxopen.preferences.PartDrafting
-
Returns the flag indicating whether to display borders around drafting views, when selected
License requirements: None.
- displayByTime() - Method in interface nxopen.cam.SimulationOptionsBuilder
-
Returns the display by time
License requirements: None.
- displayCallback(UserDefinedDisplayEvent) - Method in interface nxopen.userdefinedobjects.UserDefinedClass.DisplayCallback
-
Prototype for display, selection, attention point, fit and screen-size-fit callbacks
License requirements: None.
- displayCamObjectsDetails(NXObject[]) - Method in interface nxopen.Information
-
Display details of cam objects
License requirements: None.
- displayCenterOfRotation() - Method in interface nxopen.preferences.SessionVisualizationScreen
-
Returns whether a graphic representing the center of rotation is displayed
during interactive view rotation.
- displayCgOption() - Method in interface nxopen.cae.SolidPropertyCheckBuilder
-
Returns the output mass split option option
License requirements: None.
- DisplayChanger - Interface in nxopen.mechatronics
-
Represents the Display Changer which is used to change the display properties (Color, Translucency, and Visibility)
of rigid body during simulation.
- displayChanger() - Method in interface nxopen.mechatronics.PhysicsManager
-
- DisplayChangerBuilder - Interface in nxopen.mechatronics
-
- DisplayChangerBuilder.ExecuteModes - Class in nxopen.mechatronics
-
the execute modes.
- DisplayChangerCollection - Interface in nxopen.mechatronics
-
Represents a collection of Object Transformer.
- displayChangeSymbol() - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
- displayChangeSymbol() - Method in interface nxopen.drawings.TrackDrawingChangesGeneralBuilder
-
Returns the display change symbol
License requirements: None.
- displayCircle(Point3d, Matrix3x3, double, boolean) - Method in interface nxopen.userdefinedobjects.UserDefinedObjectDisplayContext
-
- displayCleanupReportInListWindow() - Method in interface nxopen.facet.CleanupFacetBodyBuilder
-
Displays the
ListingWindow
with numbers of various type of defects identified or repaired.
- displayComponent() - Method in interface nxopen.positioning.Network
-
Returns
the
Component
in which the display is changed
by solving the network.
- displayComponentsExact(Component[]) - Method in interface nxopen.assemblies.Component
-
Sets an array of components to display using the exact representation.
- displayComponentsLightweight(Component[]) - Method in interface nxopen.assemblies.Component
-
Sets an array of components to display using the lightweight representation.
- displayConstraints() - Method in interface nxopen.assemblies.PositioningGroup
-
Returns
the flag indicating whether constraints of member design elements
of this positioning group are to be displayed on the graphics window or not.
- displayConstraints() - Method in interface nxopen.assemblies.PositioningTask
-
Returns
the flag indicating whether constraints of work collection design elements
of this positioning task are to be displayed on the graphics window or not.
- displayConstraints() - Method in interface nxopen.positioning.ComponentPositioner
-
Returns
the flag indicating whether constraints in the part of this positioner
are to be displayed on the graphics window or not.
- displayConstraintSymbols() - Method in interface nxopen.preferences.SessionSketch
-
Returns the setting that controls whether or not to display constraint symbols
License requirements: None.
- displayConstructionGeometry() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the setting to indicate if the construction geometry should be created,
true they will be created, false they will not be created
License requirements: None.
- displayContext(String) - Method in interface nxopen.uf.UFHelp
-
- displayContext() - Method in interface nxopen.userdefinedobjects.UserDefinedDisplayEvent
-
Returns the display context.
- displayContinuationNote() - Method in interface nxopen.annotations.TableSectionStyleBuilder
-
Returns the display continuation note type
License requirements: None.
- displayContinuationNote - Variable in class nxopen.uf.UFTabnot.SectionPrefs
-
- displayContouring() - Method in interface nxopen.cae.xyplot.BaseGridLayoutStyleSetting
-
Returns a value indicating whether to display contouring
License requirements: None.
- displayCoordinateSystem - Variable in class nxopen.cae.SetManager.TargetSetMembersData
-
display coordinate system
- displayCrosshatch() - Method in interface nxopen.annotations.LightweightSectionBuilder
-
Returns the display crosshatch option
License requirements: None.
- displayCrosshatch() - Method in interface nxopen.annotations.RegionBuilder
-
Returns the display crosshatch toggle
License requirements: None.
- displayCurrentContext() - Method in interface nxopen.uf.UFHelp
-
- displayCurveCurvatureOutside() - Method in interface nxopen.preferences.PartModeling
-
Returns the curve curvature display style to show it on the inside/outside of the curve
License requirements: None.
- displayCutRegionsFlag() - Method in interface nxopen.cam.OperationDisplayOptionsBuilder
-
Returns the display cut regions flag
License requirements: None.
- displayCuttingPlaneSymbol() - Method in interface nxopen.annotations.CuttingPlaneSymbolBuilder
-
Returns the display cutting plane symbol
License requirements: None.
- displayDeletedGridPoints() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the setting to indicate if the deleted grid points should be displayed,
true they will be displayed, false they will not be displayed
License requirements: None.
- displayDeviationChecking(ICurve, ICurve, int, double, double, Measurement.DeviationReportType) - Method in interface nxopen.Measurement
-
Checks deviations between curves (curve to curve),and displays the report.
- displayDeviationChecking(Curve, Face, int, double, double, Measurement.DeviationReportType) - Method in interface nxopen.Measurement
-
Checks deviations between a curve and a face (curve to face), and displays the report.
- displayDeviationChecking(Face, Edge, Face, int, double, double, Measurement.DeviationReportType) - Method in interface nxopen.Measurement
-
Checks deviations between a edge and a face (edge to face), and displays the report.
- displayDeviationChecking(Face, Face, int, int, double, double, Measurement.DeviationReportType) - Method in interface nxopen.Measurement
-
Checks deviations between faces (face to face), and displays the report.
- displayDeviationChecking(Face, Edge, Face, Edge, int, double, double, Measurement.DeviationReportType) - Method in interface nxopen.Measurement
-
Checks deviations between edges (edge to edge), and displays the report.
- displayDialogsInPlayback() - Method in interface nxopen.preferences.SessionUserInterfaceUI
-
Returns the display dialogs in playback flag
License requirements: None.
- displayDieData() - Method in interface nxopen.die.Tip
-
Makes the product data in die position visible.
- displayDigits() - Method in interface nxopen.ame.PageNamingBuilder
-
Returns the Display Digits
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- displayDimensionLine() - Method in interface nxopen.annotations.OrdinateStyleBuilder
-
Returns the display dimension line preference for an ordinate set
License requirements: None.
- displayDirections() - Method in interface nxopen.cae.modelcheck.AlignBeamElementDirectionBuilder
-
Display element directions for connected elements, which are to be aligned with seed element direction
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- displayDirections() - Method in interface nxopen.cae.modelcheck.ReverseBeamElementDirectionBuilder
-
- displayDOFArrows() - Method in interface nxopen.preferences.SessionSketch
-
Returns the setting that controls whether or not the degree of freedom arrows are displayed.
- displayDynamicColorPlots() - Method in interface nxopen.tooling.FlowDisplayBuilder
-
Display color plots in all steps.
- displayed() - Method in interface nxopen.BasePart
-
Returns true if the part represents a displayed part.
- DISPLAYED - Static variable in class nxopen.cae.modelcheck.CheckScope
-
check all displayed elements or nodes
- DISPLAYED - Static variable in class nxopen.cae.Post.Threshold
-
- DISPLAYED_PART - Static variable in class nxopen.PartCollection.SetProtectionOn
-
The Displayed part
- DISPLAYED_PART_ABSOLUTE - Static variable in class nxopen.assemblies.AddComponentBuilder.LocationType
-
Absolute of displayed part as initial location type
- DISPLAYED_PART_WCS - Static variable in class nxopen.assemblies.AddComponentBuilder.LocationType
-
WCS as initial location type
- DISPLAYED_PARTAND_COMPONENTS - Static variable in class nxopen.PartCollection.SetProtectionOn
-
All fully open parts in the session
- DisplayedConstraint - Interface in nxopen.positioning
-
The displayed representation of a constraint, used for graphical
display and to represent it in the Assembly Navigator.
- DisplayedConstraintCollection - Interface in nxopen.positioning
-
a collection of displayed constraints
To obtain an instance of this class, refer to
Part
Created in NX7.5.0
- displayedConstraints() - Method in interface nxopen.Part
-
Returns the DisplayedConstraintCollection belonging to this part .
- displayEffectivityFilterNodesInPartNavigator() - Method in interface nxopen.annotations.PmiPreferences
-
Returns the flag indicating the display of Effectivity Filtered PMI node in Part Navigator
License requirements: None.
- displayExcludedDesignElements() - Method in interface nxopen.assemblies.Subset
-
Returns the design elements excluded from spatial search to be displayed or not
License requirements: nx_4gd_integration ("4th Generation Design")
.
- displayFacets(int, int, Point3d[], Vector3d[], UserDefinedObjectDisplayContext.FacetType) - Method in interface nxopen.userdefinedobjects.UserDefinedObjectDisplayContext
-
- displayFeatureDetails(Feature, Information.DisplayFeatureType) - Method in interface nxopen.Information
-
Displays relevant information about features created while
generating a 3-D model in the
ListingWindow
.
- displayFirstEdges() - Method in interface nxopen.cae.modelcheck.AlignShellElementFirstEdgeBuilder
-
Display first edges for connected elements, which are to be aligned with seed edge
License requirements: nx_masterfem ("Finite Element Modeling")
.
- displayFitParentheses() - Method in interface nxopen.annotations.DimensionPreferences
-
Returns the flag indicating whether to display parentheses for fit tolerance.
- displayFitSeparator() - Method in interface nxopen.annotations.DimensionPreferences
-
Returns the flag indicating whether to display separator for fit tolerance of assembly dimensions.
- displayFlag - Variable in class nxopen.uf.UFCurve.AskSplineSapData
-
- displayFormability() - Method in interface nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder
-
Display formability analysis result.
- displayGouges() - Method in interface nxopen.cam.CutDepthChecker
-
Returns the indicator to display gouges
License requirements: None.
- DisplayGridData() - Constructor for class nxopen.cae.SimBCDisplay.DisplayGridData
-
- displayGridToggle() - Method in interface nxopen.linedesigner.ColumnGridEquipmentBuilder
-
Returns the display grid status of column grid
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- displayHoles() - Method in interface nxopen.die.DrawDiePunchBuilder
-
Returns the display holes switch of the draw die punch casting, if true holes will be created in the punch, if false holes will not be created.
- displayHoles() - Method in interface nxopen.die.HoleChildBuilder
-
Returns the display holes switch of the die hole, if true the hole will be built into the model, if false it will not.
- displayHoles() - Method in interface nxopen.die.HoleParentBuilder
-
Returns the display holes switch of die holes, if true the holes will be built into the model, if false they will not.
- displayHoles() - Method in interface nxopen.die.PierceHoleChildBuilder
-
Returns the display holes option of the pierce hole
License requirements: ug_die_design ("Die Design")
.
- displayHoles() - Method in interface nxopen.die.PierceHoleParentBuilder
-
Returns the display holes option of pierce holes
License requirements: ug_die_design ("Die Design")
.
- displayHoles() - Method in interface nxopen.die.RotorBuilder
-
Returns the display holes of the rotor casting.
- displayHoles() - Method in interface nxopen.die.SteelInsertBuilder
-
Returns the display holes of the diesteelinsert
License requirements: ug_die_design ("Die Design")
.
- displayIcon() - Method in interface nxopen.blockstyler.Node
-
Returns the display icon.
- displayId() - Method in interface nxopen.drawings.GeneralViewStyle
-
Returns the display identifier option for a member view.
- displayId() - Method in interface nxopen.drawings.ViewStyleGeneralBuilder
-
Returns the display identifier option on the GENERAL tab of the View Style Dialog, it controls whether
the orientation or the name of the view is displayed in the graphic window
License requirements: None.
- displayId() - Method in interface nxopen.preferences.GeneralViewPreferences
-
Returns the display identifier option for a member view.
- displayInfo - Variable in class nxopen.uf.UFStd.StlParams
-
- displayInformation() - Method in interface nxopen.assemblies.ComponentPattern
-
Displays the information of the component pattern.
- displayInformation() - Method in interface nxopen.features.shipdesign.ExamineSteelFeatureBuilder
-
Displays the Examining results in the information window.
- displayInformation() - Method in interface nxopen.STLImporter
-
Returns the Display Information flag.
- displayInterferenceResult() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the setting to indicate if the interference curves should be created,
true they will be created, false they will not be created.
- displayInternalEdges() - Method in interface nxopen.cae.MeshCollectorDisplayDefaults3d
-
Returns the display 3d element internal edges visibility setting.
- displayInternalEdges() - Method in interface nxopen.cae.MeshDisplaySettings3d
-
Returns the display 3d element internal edges visibility setting.
- displayInterpartChildren(Part) - Method in interface nxopen.Information
-
Displays names of interpart children(part files having interlinked
geometry) in the
ListingWindow
.
- displayInterpartParents(Part) - Method in interface nxopen.Information
-
Displays names of interpart parents(part files having interlinked
geometry) in the
ListingWindow
.
- displayIntersectionCurves() - Method in interface nxopen.features.vehicledesign.WheelCoveringBuilder
-
Returns the display of the intersection curves.
- displayJisrotationLetter() - Method in interface nxopen.drawings.SectionLineStyleBuilder
-
- displayLabel() - Method in interface nxopen.drawings.SectionLineStyleBuilder
-
- displayLabel() - Method in interface nxopen.drawings.ViewProjectedArrowSettingsBuilder
-
Returns the display label
License requirements: None.
- displayLeadingDimensionZeros() - Method in interface nxopen.annotations.UnitsStyleBuilder
-
Returns the display leading dimension zeros setting for
linear dimensions and fractional angular dimensions
License requirements: None.
- displayLeadingToleranceZeros() - Method in interface nxopen.annotations.UnitsStyleBuilder
-
Returns the display leading tolerance zeros setting for
linear dimensions and fractional angular dimensions
License requirements: None.
- displayLegacyFeatureName() - Method in interface nxopen.preferences.SessionModeling
-
Returns the toggle "Display Legacy Feature names" gives choice, how user wants feature name in "Name" Coulmn in Partnav
checked toggled(True) will show old feature names in "Name" column in Partnav, while
unchecked toggled(False) will show new translatable feature names in "Name" column in Partnav
License requirements: None.
- displayLettersOnBends() - Method in interface nxopen.drawings.ViewSectionLineBuilder
-
Returns the display letters on bends
License requirements: None.
- DisplayLimitsData() - Constructor for class nxopen.cae.xyplot.AxisModel.DisplayLimitsData
-
- displayLineBetweenArrows() - Method in interface nxopen.annotations.DimensionPreferences
-
Returns the flag indicating whether to display line between arrows
License requirements: None.
- displayLinkedPart() - Method in interface nxopen.features.PartModule
-
Opens linked part module part
License requirements: usr_defined_features ("USER DEFINED FEATURES")
.
- displayLinkedPartInNewWindow() - Method in interface nxopen.features.PartModule
-
Opens linked part module part in an additional window if possible,
otherwise it will replace active displayed part in existing window.
- displayMagnitudeProperty() - Method in interface nxopen.cae.SimBCDisplay
-
Returns the neutral name of the property that will control the display
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- displayMainPart() - Method in interface nxopen.features.PartModule
-
Opens owning part module part
License requirements: usr_defined_features ("USER DEFINED FEATURES")
.
- displayMainPartInNewWindow() - Method in interface nxopen.features.PartModule
-
Opens owning part module part in an additional window if possible,
otherwise it will replace active displayed part in existing window.
- DisplayManager - Interface in nxopen
-
Represents an object to manage display settings.
- displayManager() - Method in interface nxopen.Session
-
Returns the
DisplayManager
belonging to this session
Created in NX3.0.0
- DisplayManager.FacetCacheMemoryLevelType - Class in nxopen
-
Facet cache memory level.
- DisplayManager.J3dColor - Class in nxopen
-
3d interface color definition
- DisplayManager.J3dData - Class in nxopen
-
3d interface structure
- DisplayManager.J3dGeometryData - Class in nxopen
-
- DisplayManager.J3dMaterial - Class in nxopen
-
3d interface material definition
- DisplayManager.LayerSetting - Class in nxopen
-
Represents the layer settings when the objects to show are in invisible layers
- DisplayManager.ShowHideScope - Class in nxopen
-
Controls the scope for the show hide operation.
- DisplayManager.ShowHideType - Class in nxopen
-
Controls the type of object to show or hide.
- displayMenu(String, int, String[], int) - Method in interface nxopen.uf.UFUi
-
- displayMesh(Tag) - Method in interface nxopen.uf.UFSf
-
- displayMessage(String, int) - Method in interface nxopen.uf.UFUi
-
- displayMethod() - Method in interface nxopen.geometricanalysis.HighlightLinesAnalysisBuilder
-
- displayMidnodeValue(boolean) - Method in interface nxopen.cae.ResultParameters
-
This is display only command.
- displayMinimumDistance(DisplayableObject, DisplayableObject) - Method in interface nxopen.Measurement
-
Calculates and displays 'Minimum Distance " between objects.
- displayMinimumDistance(NXObject, Point3d, NXObject, Point3d) - Method in interface nxopen.Measurement
-
Calculates and displays 'Minimum Distance' between objects.
- displayMinimumDistance(NXObject, Point3d, NXObject) - Method in interface nxopen.Measurement
-
Calculates and displays 'Minimum Distance' between objects.
- displayMinimumDistance(NXObject, NXObject, Point3d) - Method in interface nxopen.Measurement
-
Calculates and displays 'Minimum Distance' between objects.
- DisplayMinimumDistanceData() - Constructor for class nxopen.Measurement.DisplayMinimumDistanceData
-
- displayMode() - Method in interface nxopen.cae.SimBCDisplay
-
Returns the BC display mode
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- displayMode() - Method in interface nxopen.geometricanalysis.DistanceAnalysisBuilder
-
Returns the display mode.
- displayMode() - Method in interface nxopen.geometricanalysis.RadiusAnalysisBuilder
-
Returns the display mode.
- displayMode() - Method in interface nxopen.geometricanalysis.SlopeAnalysisBuilder
-
Returns the display mode.
- displayMode() - Method in interface nxopen.preferences.SubdivisionModelingPreferences
-
Returns the mesh and solid body display option
License requirements: None.
- displayMode - Variable in class nxopen.preferences.ViewVisualizationVisual.TrueSurfaceDisplayPref
-
Deprecated.
Display Mode
- displayMode - Variable in class nxopen.uf.UFView.Visualization
-
- DisplayModification - Interface in nxopen
-
Represents changes to the display characteristics of an object.
- DisplayModification.NewGridData - Class in nxopen
-
- displayMultiLineAbsoluteRotationScreenSizeStandardText(int, String, Point3d, UserDefinedObjectDisplayContext.StandardTextRef, String[], UserDefinedObjectDisplayContext.TextSize) - Method in interface nxopen.userdefinedobjects.UserDefinedObjectDisplayContext
-
Displays a multi-line "Standard Text" string using "Absolute Rotation and Screen
Size Geometry" for a
UserDefinedObject
.
- displayMultiLineAbsoluteStandardText(int, String, Point3d, UserDefinedObjectDisplayContext.StandardTextRef, String[], double, double) - Method in interface nxopen.userdefinedobjects.UserDefinedObjectDisplayContext
-
Displays a multi-line "Standard Text" string using "Absolute Geometry" for a
UserDefinedObject
.
- displayMultiLineScreenStandardText(int, String, Point3d, UserDefinedObjectDisplayContext.StandardTextRef, String[], UserDefinedObjectDisplayContext.TextSize) - Method in interface nxopen.userdefinedobjects.UserDefinedObjectDisplayContext
-
Displays a multi-line "Standard Text" string using "Screen Geometry" for a
UserDefinedObject
.
- displayMultiSelectMenu(String, int, String[], int) - Method in interface nxopen.uf.UFUi
-
- DisplayMultiSelectMenuData() - Constructor for class nxopen.uf.UFUi.DisplayMultiSelectMenuData
-
- DisplayMultiSelectMenuReturn - Variable in class nxopen.uf.UFUi.DisplayMultiSelectMenuData
-
- displayName() - Method in interface nxopen.assemblies.Component
-
Returns the displayable name of the prototype part.
- displayName() - Method in interface nxopen.cae.PostScenarioVariable
-
Returns the localized name of this Variable.
- displayName() - Method in interface nxopen.cae.responsesimulation.RSDisplayObject
-
Returns the true/false flag based on whether the name of the BC is
displayed in the graphics window
License requirements: nx_response_anlys ("NX Response Analysis")
.
- displayName() - Method in interface nxopen.cam.CAMAttribute
-
Returns the name of the attribute
License requirements: None.
- displayName() - Method in interface nxopen.pdm.AttributeGroup
-
Returns the display name for the attribute group.
- displayName() - Method in interface nxopen.pdm.AttributeGroupDescription
-
Returns the display name for the attribute group description.
- displayName() - Method in interface nxopen.report.BaseArgument
-
Returns the argument display name
License requirements: None.
- displayName() - Method in interface nxopen.report.BaseItem
-
Returns the item display name.
- displayName() - Method in interface nxopen.report.CommandBuilder
-
Returns the command display name
License requirements: None.
- displayNameStyle() - Method in interface nxopen.annotations.OrdinateStyleBuilder
-
Returns the name display style for an ordinate set
License requirements: None.
- DisplayNodalCsysBuilder - Interface in nxopen.cae
-
- DisplayNodalCsysBuilder.DisplayNodalCsysType - Class in nxopen.cae
-
the options to specify the type of coordinate system to display
- DisplayNodalCsysBuilder.NodesToDisplayType - Class in nxopen.cae
-
the options to specify the scope of nodes to select
- displayNonmodalMsg(String, String, int) - Method in interface nxopen.uf.UFUi
-
- displayNormals() - Method in interface nxopen.cae.modelcheck.AlignShellElementNormalBuilder
-
Display element normals for connected elements, which are to be aligned with seed element normal
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- displayNormals() - Method in interface nxopen.cae.modelcheck.ReverseShellElementNormalBuilder
-
- displayNormals() - Method in interface nxopen.cae.modelcheck.SolidElementFaceNormalBuilder
-
- displayNumericalValueWithArrow - Variable in class nxopen.cae.Post.Mark
-
- displayObjectColor() - Method in interface nxopen.preferences.SessionSketch
-
Returns the setting that controls whether or not sketch objects should be displayed in their true color
License requirements: None.
- displayObjectColor() - Method in interface nxopen.preferences.SketchPreferences
-
Returns the setting that controls whether or not objects are displayed in their actual color in sketch
License requirements: None.
- displayObjectName() - Method in interface nxopen.preferences.SessionSketch
-
Returns the setting that controls whether or not objects are displayed with their names in sketch.
- displayObjectName() - Method in interface nxopen.preferences.SketchPreferences
-
Returns the setting that controls whether or not objects are displayed with their names in sketch.
- displayObjects - Variable in class nxopen.drawings.ViewBreak.ViewBreakDisplayableObjectsAndOffsetsData
-
- displayObjectsDetails(NXObject[]) - Method in interface nxopen.Information
-
Displays information about geometric objects in the
ListingWindow
.
- displayObjectsOnEntry() - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder
-
Display the parting surfaces, guide lines, and parting lines when entering the Design Parting Surface command.
- displayOgpArc(Tag, double[], double, double, double[], double) - Method in interface nxopen.uf.UFDisp
-
- displayOgpCircle(Tag, double[], double[], double) - Method in interface nxopen.uf.UFDisp
-
- displayOgpLine(Tag, double[], double[]) - Method in interface nxopen.uf.UFDisp
-
- displayOgpPolyline(Tag, double[][], int) - Method in interface nxopen.uf.UFDisp
-
- displayOnSegments() - Method in interface nxopen.routing.BranchPathNumberingBuilder
-
Returns the toggle specified in the UI on whether to display the labels
License requirements: routing_hvac ("Routing HVAC")
.
- displayOption() - Method in interface nxopen.features.shipdesign.DisplaySolidBuilder
-
Returns the setting for how the basic design objects are displayed.
- DisplayPaint - Interface in nxopen.cam
-
Represents a display paint Builder
This is an abstract class and cannot be instantiated.
- displayParenthesesOnReferenceDimensions() - Method in interface nxopen.preferences.SessionSketch
-
Returns the setting that controls whether or not to display parentheses on reference dimensions
License requirements: None.
- displayParenthesesOnReferenceDimensions() - Method in interface nxopen.preferences.SketchPreferences
-
Returns the setting that controls whether or not parentheses are displayed on reference dimensions.
- displayParents(Tag, int, int, int) - Method in interface nxopen.uf.UFSo
-
- displayPartBodyName() - Method in interface nxopen.annotations.HoleTableSettingsFormatBuilder
-
Returns the display part and body name
License requirements: None.
- displayPartHistory(BasePart) - Method in interface nxopen.Information
-
- displayPartImport() - Method in interface nxopen.tooling.BlankGeneratorBuilder
-
Returns the display part needed while importing blank.
- DisplayPartOption - Class in nxopen
-
Controls whether or not a new display part may be displayed in addition to existing display parts,
or instead of the currently active display part.
- displayPartOption() - Method in interface nxopen.FileNew
-
Returns the display part option.
- displayPartOption() - Method in interface nxopen.pid.FileNewApplicationBuilder
-
Returns the display part option for the new file being created
License requirements: nx_pid_design_author ("NX P and ID Design Author")
.
- displayPartSelect() - Method in interface nxopen.tooling.BlankGeneratorBuilder
-
Returns the display part needed while selecting a blank .
- DisplayPath - Interface in nxopen.cam
-
Represents a display path Builder
This is an abstract class and cannot be instantiated.
- DisplayPath.PathDisplayTypes - Class in nxopen.cam
-
the path display types .
- displayPmiAssociatedComponentsLoadedForReference() - Method in interface nxopen.annotations.PmiPreferences
-
Returns the flag indicating PMI associated objects components loaded for reference
License requirements: None.
- DisplayPmiEffectivityMethod - Class in nxopen.annotations
-
Specifies the options for display PMI Effectivity
- displayPmiEffectivityMethod() - Method in interface nxopen.annotations.PmiPreferences
-
Returns the value indicating precise option of PMI Effectivity for prime geometry
License requirements: None.
- displayPmiEffectivityReferenceMethod() - Method in interface nxopen.annotations.PmiPreferences
-
Returns the value indicating precise option of PMI Effectivity for reference geometry
License requirements: None.
- displayPmiModelViewDisclosurePurpose() - Method in interface nxopen.annotations.PmiPreferences
-
Returns the Model View Disclosure Purpose
License requirements: None.
- displayPmiQueryDialogFromMb3() - Method in interface nxopen.annotations.PmiPreferences
-
Returns the PMI query dialog visibility from mb3 option
License requirements: None.
- displayPmiUserDefinedModelViewDisclosure() - Method in interface nxopen.annotations.PmiPreferences
-
Returns the User Defined Model View Disclosure
License requirements: None.
- displayPointDetails(Point) - Method in interface nxopen.Information
-
Obtains the absolute and work coordinates of an explicit or implicit point
and displays information in the
ListingWindow
device.
- displayPointDetails(Point3d) - Method in interface nxopen.Information
-
Displays the absolute and work coordinates of a point
in the
ListingWindow
device.
- displayPoints(Point3d[], UserDefinedObjectDisplayContext.PolyMarker) - Method in interface nxopen.userdefinedobjects.UserDefinedObjectDisplayContext
-
- displayPolygon(Point3d[], boolean) - Method in interface nxopen.userdefinedobjects.UserDefinedObjectDisplayContext
-
- displayPolyline(Point3d[]) - Method in interface nxopen.userdefinedobjects.UserDefinedObjectDisplayContext
-
- displayProdIntObjectsDetails(NXObject[], int) - Method in interface nxopen.Information
-
Display details of product interface objects
License requirements: None.
- displayProductBody() - Method in interface nxopen.tooling.MWDefineRegionsBuilder
-
Display the product body in the part file
License requirements: None.
- displayProductBody() - Method in interface nxopen.tooling.MWSearchRegionBuilder
-
Display the product body in the part file
License requirements: None.
- displayProfile(boolean) - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
Displays profile result.
- DisplayPropertiesBuilder - Interface in nxopen.fields
-
Represents a builder class for editing display properties of a
Field
Used to edit a
Field
display properties.
- DisplayPropertiesBuilder.BalStrainType - Class in nxopen.fields
-
Balance Strain Field Type
- DisplayPropertiesBuilder.ComplexScalarType - Class in nxopen.fields
-
Complex Scalar Field Type
- DisplayPropertiesBuilder.ComplexVectorType - Class in nxopen.fields
-
Complex Vector Field Type
- DisplayPropertiesBuilder.DepDispTypeEnum - Class in nxopen.fields
-
Field Dep Disp Type
- DisplayPropertiesBuilder.DepDomColorEnum - Class in nxopen.fields
-
Field Dep Dom Color
- DisplayPropertiesBuilder.DepLabelValueEnum - Class in nxopen.fields
-
Field Dep Label Value
- DisplayPropertiesBuilder.DispResolutionEnum - Class in nxopen.fields
-
Field Disp Resolution
- DisplayPropertiesBuilder.FieldQuantityType - Class in nxopen.fields
-
Field Quanity Type
- DisplayPropertiesBuilder.IndepDomDispType - Class in nxopen.fields
-
Field Indep Dom Disp
- DisplayPropertiesBuilder.Legacy3DType - Class in nxopen.fields
-
Legacy_3D Type
- DisplayPropertiesBuilder.LegendPos - Class in nxopen.fields
-
legend position
- DisplayPropertiesBuilder.LineFontEnum - Class in nxopen.fields
-
Field Line Display Fonts
- DisplayPropertiesBuilder.LineWidthEnum - Class in nxopen.fields
-
Field Line Widths
- DisplayPropertiesBuilder.ScalarType - Class in nxopen.fields
-
Scalar Field Type
- DisplayPropertiesBuilder.TblPointTypeEnum - Class in nxopen.fields
-
Field Tbl Point Type
- DisplayPropertiesBuilder.TensorType - Class in nxopen.fields
-
Tensor Field Type
- DisplayPropertiesBuilder.ValueRange - Class in nxopen.fields
-
range for contour plots
- DisplayPropertiesBuilder.ValuesEnum - Class in nxopen.fields
-
Field Values
- DisplayPropertiesBuilder.VectorType - Class in nxopen.fields
-
Vector Field Type
- displayReferenceGeometry() - Method in interface nxopen.features.WaveInterfaceLinkerBuilder
-
Returns the setting that controls whether or not the reference geometry in the linked product interface are displayed
License requirements: None.
- displayReferenceGeometry() - Method in interface nxopen.features.WaveSketchBuilder
-
Returns the setting that controls whether or not the reference geometry in the linked sketch are displayed
License requirements: None.
- displayReferenceGeometry() - Method in interface nxopen.preferences.SessionSketch
-
Returns the setting that controls whether or not the reference geometry are displayed on inactive sketches.
- displayReferenceGeometry() - Method in interface nxopen.preferences.SketchPreferences
-
Returns the setting that controls whether or not the reference geometry are displayed on inactive sketches
License requirements: None.
- displayRegion() - Method in interface nxopen.drafting.AutomationPreferencesBuilder
-
Returns the display in non template
License requirements: None.
- displayRegionLabel() - Method in interface nxopen.drafting.AutomationPreferencesBuilder
-
Returns the display region label
License requirements: None.
- displayRegionLabel() - Method in interface nxopen.drawings.AutomationTemplateRegionBuilder
-
Returns the flag to indicate if the display region label should be displayed
License requirements: None.
- displayRegionOrSheetBody(int) - Method in interface nxopen.tooling.MWDefineSheetsBuilder
-
Turn on or off the display for the region or sheet body for the selected regions
License requirements: None.
- displayResolution() - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
Returns the display resolution
License requirements: None.
- displayResolution() - Method in interface nxopen.geometricanalysis.FaceAnalysisDisplayBuilder
-
Returns the display resolution.
- displayResolution() - Method in interface nxopen.geometricanalysis.ReflectionAnalysisBuilder
-
Returns the display resolution.
- DisplayResolutionBuilder - Interface in nxopen.geometricutilities
-
- displayResourceBarOption() - Method in interface nxopen.preferences.SessionUserInterfaceUI
-
Returns the display resource bar option
License requirements: None.
- displayResultsAsInfo() - Method in interface nxopen.geometricanalysis.ExamineGeometry
-
Displays the results in the information window
License requirements: None.
- displayRotatedItems() - Method in interface nxopen.die.FlangeTaskBuilder
-
Returns the display rotated items setting of the flange task.
- displayRotationLetter() - Method in interface nxopen.drawings.ViewSectionLineBuilder
-
Returns the display rotation letter
License requirements: None.
- displayRoutingPathLength(ISegment[]) - Method in interface nxopen.Measurement
-
Calculates and displays the Routing path length.
- displayRpoDimensions(Tag, int, Tag[], int, int, int) - Method in interface nxopen.uf.UFDisp
-
- displayScale() - Method in interface nxopen.features.WaveDatumBuilder
-
Returns the display scale
License requirements: None.
- displayScale() - Method in interface nxopen.motion.CurveContactBuilder
-
Returns the display scale
License requirements: None.
- displayScale() - Method in interface nxopen.motion.JointDefine
-
Returns the display scale
License requirements: mechanisms ("MECHANISMS")
.
- displayScale() - Method in interface nxopen.motion.MarkerBuilder
-
Returns the display scale
License requirements: None.
- displayScale() - Method in interface nxopen.motion.MotionBuilder
-
Returns the icon display scale
License requirements: mechanisms ("MECHANISMS")
.
- displayScale() - Method in interface nxopen.motion.MotionObject
-
Returns the display scale factor
License requirements: mechanisms ("MECHANISMS")
.
- displayScale() - Method in interface nxopen.motion.VObject
-
Returns the display scale
License requirements: None.
- displayScale - Variable in class nxopen.uf.UFMotion.PointOnSurfaceData
-
- displayScaleFactor() - Method in interface nxopen.features.DatumCsysBuilder
-
Returns the scale factor of the input Datum Csys
License requirements: None.
- displayScreenStandardText(int, String, Point3d, UserDefinedObjectDisplayContext.StandardTextRef, String, UserDefinedObjectDisplayContext.TextSize) - Method in interface nxopen.userdefinedobjects.UserDefinedObjectDisplayContext
-
Displays a single line "Standard Text" string using "Screen Geometry" for a
UserDefinedObject
.
- displaySection() - Method in interface nxopen.cae.MeshCollectorDisplayDefaults1d
-
Returns the display 1d element section setting.
- displaySection() - Method in interface nxopen.cae.MeshDisplaySettings1d
-
Returns the display 1d element section setting.
- displaySectionEndRelease() - Method in interface nxopen.cae.MeshCollectorDisplayDefaults1d
-
Returns the display 1d element section end release visibility setting.
- displaySectionEndRelease() - Method in interface nxopen.cae.MeshDisplaySettings1d
-
Returns the display 1d element section end release visibility setting.
- displaySectioningToggle() - Method in interface nxopen.ModelingView
-
Returns the toggle between enabling or disabling the Dynamic Sectioning viewing
License requirements: None.
- displaySectionLine() - Method in interface nxopen.drawings.SectionViewStyle
-
Returns the status of display section line.
- displaySectionLine() - Method in interface nxopen.drawings.ViewStyleSectionBuilder
-
Returns the display section line toggle on the SECTION tab of the View Style Dialog
License requirements: None.
- displaySectionMappingWarning() - Method in interface nxopen.preferences.SessionSketch
-
Returns the display section mapping warning flag.
- displaySectionOrientation() - Method in interface nxopen.cae.MeshCollectorDisplayDefaults1d
-
Returns the display 1d element section orientation visibility setting.
- displaySectionOrientation() - Method in interface nxopen.cae.MeshDisplaySettings1d
-
Returns the display 1d element section orientation visibility setting.
- displaySectionOrientationVector() - Method in interface nxopen.cae.MeshCollectorDisplayDefaults1d
-
Returns the display 1d element section orientation vector visibility setting.
- displaySectionOrientationVector() - Method in interface nxopen.cae.MeshDisplaySettings1d
-
Returns the display 1d element section orientation vector visibility setting.
- DisplaySectionType - Class in nxopen.cae
-
specifies the type of display for 1d element sections
- displaySelectedObjects() - Method in interface nxopen.cam.Preferences
-
Returns the display selected objects
License requirements: None.
- DisplaySettings() - Constructor for class nxopen.cae.modelcheck.DuplicateElementsCheckBuilder.DisplaySettings
-
- DisplaySettings(boolean, boolean, NXColor, DisplayableObject.ObjectWidth) - Constructor for class nxopen.cae.modelcheck.DuplicateElementsCheckBuilder.DisplaySettings
-
Constructor for the DisplaySettings object.
- DisplaySettings() - Constructor for class nxopen.cae.modelcheck.DuplicateNodesCheckBuilder.DisplaySettings
-
- DisplaySettings(boolean, boolean, boolean, NXColor, NXColor, NXColor) - Constructor for class nxopen.cae.modelcheck.DuplicateNodesCheckBuilder.DisplaySettings
-
Constructor for the DisplaySettings object.
- displaySettings() - Method in interface nxopen.geometricanalysis.DistanceAnalysisBuilder
-
Returns the distance analysis display settings.
- displaySettings() - Method in interface nxopen.geometricanalysis.RadiusAnalysisBuilder
-
Returns the radius analysis display settings.
- displaySettings() - Method in interface nxopen.geometricanalysis.SlopeAnalysisBuilder
-
Returns the slope analysis display settings.
- displaySettingsData() - Method in interface nxopen.cae.modelcheck.DuplicateElementsCheckBuilder
-
Returns the display settings for duplicate elements
License requirements: None.
- displaySettingsData() - Method in interface nxopen.cae.modelcheck.DuplicateNodesCheckBuilder
-
Returns the display settings for duplicate nodes
License requirements: None.
- displayShadedEdges() - Method in interface nxopen.cae.MeshCollectorDisplayDefaults2d
-
Returns the element shaded edge visibility.
- displayShadedEdges() - Method in interface nxopen.cae.MeshCollectorDisplayDefaults3d
-
Returns the element shaded edge visibility.
- displayShadedEdges() - Method in interface nxopen.cae.MeshDisplaySettings2d
-
Returns the element shaded edge visibility.
- displayShadedEdges() - Method in interface nxopen.cae.MeshDisplaySettings3d
-
Returns the element shaded edge visibility.
- displaySheetSizeInBorder() - Method in interface nxopen.diagramming.SheetBorderSettingsBuilder
-
Returns the flag indicates to display sheet size in border or not
License requirements: None.
- displaySheetSizeInBorder() - Method in interface nxopen.drawings.SheetBorderSettingsBuilder
-
Returns the display sheet size in border
License requirements: None.
- DisplaySilhouette - Interface in nxopen.cam
-
Represents a display silhouette Builder
This is an abstract class and cannot be instantiated.
- displaySketDimensions(Tag, int, Tag[], int, int, int) - Method in interface nxopen.uf.UFDisp
-
- DisplaySolidBuilder - Interface in nxopen.features.shipdesign
-
This class is used to identify ship structure that is to have a temporary
solid display built for it.
- DisplaySolidBuilder.DisplayOptionTypes - Class in nxopen.features.shipdesign
-
Used to specify how the basic design profile system objects are displayed.
- displayStationary() - Method in interface nxopen.cam.SimulationOptionsBuilder
-
Returns the display stationary
License requirements: None.
- displayStatus() - Method in interface nxopen.die.CastReliefParentBuilder
-
Returns the display status of cast relief, if true input data to the cast relief will be displayed, if false the input data will not be displayed.
- displayStatus() - Method in interface nxopen.die.ConnectProfileParentBuilder
-
Returns the display status of die pierce holes
License requirements: ug_die_design ("Die Design")
.
- displayStatus() - Method in interface nxopen.die.DeckParentBuilder
-
Returns the display status of deck, if true input data to the deck will be displayed, if false the input data will not be displayed.
- displayStatus() - Method in interface nxopen.die.DrawDiePunchSectionBuilder
-
Returns the display status of the draw die punch casting, if true input data to the draw die punch casting will be displayed,
if false the input data will not be displayed.
- displayStatus() - Method in interface nxopen.die.FlangeSteelRibChildBuilder
-
Returns the display status of the Flange Steel Rib
License requirements: ug_die_design ("Die Design")
.
- displayStatus() - Method in interface nxopen.die.FlangeSteelRibParentBuilder
-
Returns the display status of the Flange Steel Ribs
License requirements: ug_die_design ("Die Design")
.
- displayStatus() - Method in interface nxopen.die.HandlingCoreChildBuilder
-
Returns the display status of the handling core, if true input data to the handling core will be displayed,
if false the input data will not be displayed.
- displayStatus() - Method in interface nxopen.die.HandlingCoreParentBuilder
-
Returns the display status of handling cores, if true input data to the handling cores will be displayed,
if false the input data will not be displayed.
- displayStatus() - Method in interface nxopen.die.HoleChildBuilder
-
Returns the display status of the die hole, if true input data to the hole will be displayed,
if false the input data will not be displayed.
- displayStatus() - Method in interface nxopen.die.HoleParentBuilder
-
Returns the display status of die holes, if true input data to the holes will be displayed,
if false the input data will not be displayed.
- displayStatus() - Method in interface nxopen.die.KeywayChildBuilder
-
Returns the display status of the keyway, if true input data to the keyway will be displayed,
if false the input data will not be displayed.
- displayStatus() - Method in interface nxopen.die.KeywayParentBuilder
-
Returns the display status of keyways, if true input data to the keyways will be displayed,
if false the input data will not be displayed.
- displayStatus() - Method in interface nxopen.die.PadChildBuilder
-
Returns the display status of the die pad, if true input data to the pad will be displayed,
if false the input data will not be displayed.
- displayStatus() - Method in interface nxopen.die.PadParentBuilder
-
Returns the display status of die pads, if true input data to the pads will be displayed,
if false the input data will not be displayed.
- displayStatus() - Method in interface nxopen.die.PierceHoleChildBuilder
-
Returns the display status of the pierce hole
License requirements: ug_die_design ("Die Design")
.
- displayStatus() - Method in interface nxopen.die.PierceHoleParentBuilder
-
Returns the display status of pierce holes
License requirements: ug_die_design ("Die Design")
.
- displayStatus() - Method in interface nxopen.die.PointChildBuilder
-
Returns the display status of the point, if true input data to the point will be displayed,
if false the input data will not be displayed.
- displayStatus() - Method in interface nxopen.die.PointParentBuilder
-
Returns the display status of points, if true input data to the points will be displayed,
if false the input data will not be displayed.
- displayStatus() - Method in interface nxopen.die.PressureSystemChildBuilder
-
Returns the display status of the pressure system, if true input data to the pressure system will be displayed,
if false the input data will not be displayed.
- displayStatus() - Method in interface nxopen.die.PressureSystemParentBuilder
-
Returns the display status of pressure systems, if true input data to the pressure systems will be displayed,
if false the input data will not be displayed.
- displayStatus() - Method in interface nxopen.die.RibChildBuilder
-
Returns the display status of the die rib, if true input data to the rib will be displayed,
if false the input data will not be displayed.
- displayStatus() - Method in interface nxopen.die.RibParentBuilder
-
Returns the display status of die ribs, if true input data to the ribs will be displayed,
if false the input data will not be displayed.
- displayStatus() - Method in interface nxopen.die.RotorSectionBuilder
-
Returns the display status of the die rotor casting
License requirements: ug_die_design ("Die Design")
.
- displayStatus() - Method in interface nxopen.die.SteelInsertSegmentChildBuilder
-
Returns the display status of die sisegs
License requirements: ug_die_design ("Die Design")
.
- displayStatus() - Method in interface nxopen.die.SteelInsertSegmentParentBuilder
-
Returns the display status of die sisegs
License requirements: ug_die_design ("Die Design")
.
- displayStatus() - Method in interface nxopen.die.ThroatChildBuilder
-
Returns the display status of the throat section, if true input data to the throat section will be displayed,
if false the input data will not be displayed.
- displayStatus() - Method in interface nxopen.die.ThroatParentBuilder
-
Returns the display status of the throat sections, if true input data to the throat sections will be displayed,
if false the input data will not be displayed.
- displayStatus() - Method in interface nxopen.die.WearPlateLocChildBuilder
-
Returns the display status of wear plate and locators
License requirements: ug_die_design ("Die Design")
.
- displayStatus() - Method in interface nxopen.die.WearPlateLocParentBuilder
-
Returns the display status of wear plate and locators
License requirements: ug_die_design ("Die Design")
.
- displayStatus() - Method in interface nxopen.Layout
-
- displayStrain() - Method in interface nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder
-
Display strain analysis result.
- displayStress() - Method in interface nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder
-
Display stress analysis result.
- displayStyle() - Method in interface nxopen.annotations.OffsetCenterPointBuilder
-
Returns the display style
License requirements: None.
- displayStyle() - Method in interface nxopen.annotations.StyleBuilder
-
Returns the display style builder
License requirements: None.
- displayStyle() - Method in interface nxopen.annotations.TableEditSettingsBuilder
-
Returns the display style builder
License requirements: None.
- displayStyle() - Method in interface nxopen.cae.PostAnnotation
-
Returns the annotation style
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- displayStyle() - Method in interface nxopen.cae.xyplot.BasicModel
-
Returns the model display style
License requirements: None.
- displayStyle() - Method in interface nxopen.visualreporting.GroupLabel
-
- DisplayStyleBuilder - Interface in nxopen.annotations
-
- displaySuppressedConstraints() - Method in interface nxopen.assemblies.PositioningGroup
-
Returns
the flag indicating whether suppressed constraints of member design elements
of this positioning group are to be displayed on the graphics window or not.
- displaySuppressedConstraints() - Method in interface nxopen.assemblies.PositioningTask
-
Returns
the flag indicating whether suppressed constraints of work collection design
elements of this positioning task are to be displayed on the graphics window
or not.
- displaySuppressedConstraints() - Method in interface nxopen.positioning.ComponentPositioner
-
Returns
the flag indicating whether suppressed constraints in the part of this positioner
are to be displayed on the graphics window or not.
- displayTechnique() - Method in interface nxopen.ModelingViewHighQualityImage
-
Returns the display technique to use for the generation of the High Quality Image.
- displayTemplatePart() - Method in interface nxopen.drawings.AutomationTemplateRegionBuilder
-
Returns the value that determines whether or not regions should be displayed in a non-template part.
- displayTemporaryAbsoluteGeometry(int, View, TransientText.ViewType, DisplayableObject, Point3d) - Method in interface nxopen.display.TransientText
-
Displays text as temporary display using absolute geometry.
- displayTemporaryAbsRotScreenSizeGeometry(int, View, TransientText.ViewType, DisplayableObject, Point3d) - Method in interface nxopen.display.TransientText
-
Displays text as temporary display using screen geometry but with rotation
defined in absolute space.
- displayTemporaryArc(Tag, UFDisp.ViewType, double[], double, double, double[], double, UFObj.DispProps) - Method in interface nxopen.uf.UFDisp
-
- displayTemporaryLine(Tag, UFDisp.ViewType, double[], double[], UFObj.DispProps) - Method in interface nxopen.uf.UFDisp
-
- displayTemporaryPoint() - Method in interface nxopen.blockstyler.SpecifyLocation
-
Returns the DisplayTemporaryPoint
License requirements: None.
- displayTemporaryPoint(Tag, UFDisp.ViewType, double[], UFObj.DispProps, UFDisp.PolyMarker) - Method in interface nxopen.uf.UFDisp
-
- displayTemporaryScreenGeometry(int, View, TransientText.ViewType, DisplayableObject, Point3d) - Method in interface nxopen.display.TransientText
-
Displays text as temporary display using screen geometry.
- displayTemporaryText(Tag, UFDisp.ViewType, String, double[], UFDisp.TextRef, UFObj.DispProps, double, int) - Method in interface nxopen.uf.UFDisp
-
- displayText() - Method in interface nxopen.blockstyler.Node
-
Returns the display text of node.
- displayText() - Method in interface nxopen.cae.MeshCollectorDisplayDefaults0d
-
Returns the display element text visibility setting.
- displayText() - Method in interface nxopen.cae.MeshCollectorDisplayDefaults1d
-
Returns the display element text visibility setting.
- displayText() - Method in interface nxopen.cae.MeshDisplaySettings0d
-
Returns the display element text visibility setting.
- displayText() - Method in interface nxopen.cae.MeshDisplaySettings1d
-
Returns the display element text visibility setting.
- displayText(String, Point3d, UserDefinedObjectDisplayContext.TextRef) - Method in interface nxopen.userdefinedobjects.UserDefinedObjectDisplayContext
-
- displayThickness() - Method in interface nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder
-
Display thickness analysis result.
- displayThickShell() - Method in interface nxopen.cae.MeshCollectorDisplayDefaults2d
-
Returns the element thick shell display setting.
- displayThickShell() - Method in interface nxopen.cae.MeshDisplaySettings2d
-
Returns the element thick shell display setting.
- displayThinning() - Method in interface nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder
-
Display thinning analysis result.
- DisplayTool - Interface in nxopen.cam
-
Represents a display tool Builder
This is an abstract class and cannot be instantiated.
- DisplayTool.ToolDisplayTypes - Class in nxopen.cam
-
the tool display types .
- displayTrailingZeros() - Method in interface nxopen.annotations.UnitsFormatPreferences
-
Returns the flag indicating whether to display trailing zeros on dimension values
License requirements: None.
- displayTrailingZeros() - Method in interface nxopen.annotations.UnitsStyleBuilder
-
Returns the display trailing zeros setting for linear dimensions and tolerances
License requirements: None.
- displayTrailingZeros - Variable in class nxopen.uf.UFDrf.UnitsFormatPreferences
-
- displayTransform() - Method in interface nxopen.cam.InspectionMeasDataBuilder
-
Returns the display transform
License requirements: None.
- displayTurningIpw() - Method in interface nxopen.cam.Preferences
-
Returns the display turning ipw
License requirements: None.
- displayType - Variable in class nxopen.annotations.NarrowDimensionData
-
- displayType() - Method in interface nxopen.cae.modelcheck.ReverseShellElementNormalBuilder
-
Returns the display type
License requirements: None.
- displayType() - Method in interface nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder
-
Returns the display type for curvature values.
- displayType - Variable in class nxopen.uf.UFDrf.NarrowDimensionInfo
-
- displayType - Variable in class nxopen.uf.UFGdt.LimitsAndFitsData
-
- displayUnicodeMarker(String, int, String, Point3d, double) - Method in interface nxopen.userdefinedobjects.UserDefinedObjectDisplayContext
-
Displays a single character in the given font and style centered at the given position.
- displayUniqueInputsToMap() - Method in interface nxopen.features.ReplaceFeatureBuilder
-
Returns the indication on whether to use the unique mapping of parent objects instead of whole Selection Intent.
- displayUpdate() - Method in interface nxopen.cae.SmoothOptResultsBuilder
-
Display update
License requirements: nx_masterfem ("Finite Element Modeling")
.
- displayUpdateReport() - Method in interface nxopen.preferences.SessionAssemblies
-
Returns the display update report option
License requirements: None.
- displayUpdateStatusReport(Part) - Method in interface nxopen.Information
-
Displays status of all the features that failed to update
in the
ListingWindow
.
- displayUrl(String) - Method in interface nxopen.uf.UFUi
-
- displayUrlAndActivate(String) - Method in interface nxopen.uf.UFUi
-
- displayUsertool(int, boolean) - Method in interface nxopen.uf.UFUi
-
- displayUvDirs(Tag) - Method in interface nxopen.uf.UFScop
-
- displayValue() - Method in interface nxopen.pdm.EffectivityAttributePropertiesBuilder
-
Returns the display value.
- displayValueType() - Method in interface nxopen.cae.PostAnnotation
-
Returns the annotation value type
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- displayVertices() - Method in interface nxopen.preferences.SessionSketch
-
Returns the setting that controls whether or not to display sketch vertices.
- displayVertices() - Method in interface nxopen.preferences.SketchPreferences
-
Returns the setting that controls whether or not vertices are displayed in an active sketch.
- displayWv(String, String) - Method in interface nxopen.uf.UFHelp
-
- displayZeroAtBaseline() - Method in interface nxopen.annotations.OrdinateDimensionPreferences
-
Returns the display zero at baseline flag.
- displayZeroAtBaseline() - Method in interface nxopen.annotations.OrdinateStyleBuilder
-
Returns the display zero at baseline flag.
- displCurveType() - Method in interface nxopen.motion.JointDefine
-
Returns the displacemnet curve type of a screw joint
License requirements: None.
- dispose() - Method in interface nxopen.TransientObject
-
Frees the resources held by this object.
- disposeCloneObject(CloneObject) - Method in interface nxopen.tooling.ElectrodeInitializationBuilder
-
Disposes the clone object.
- disposition() - Method in interface nxopen.cae.CompanionResultBuilder
-
Returns the file disposition attribute indicates how the companion result file will be disposed of when the primary results are gone.
- dispPar1 - Variable in class nxopen.uf.UFCurve.Bcmmcp
-
- dispPar2 - Variable in class nxopen.uf.UFCurve.Bcmmcp
-
- DispProps() - Constructor for class nxopen.uf.UFObj.DispProps
-
- DispProps(int, int, int, int, int, boolean) - Constructor for class nxopen.uf.UFObj.DispProps
-
- dispToolEnd() - Method in interface nxopen.cam.DmBndBuilder
-
Returns the Display Tool End
License requirements: None.
- dissectExpString(String) - Method in interface nxopen.uf.UFModlGeneral
-
- DissectExpStringData() - Constructor for class nxopen.uf.UFModlGeneral.DissectExpStringData
-
- DISSIPATED_ENERGY_DENSITY - Static variable in class nxopen.cae.Result.Quantity
-
- DISSIPATED_POWER_DENSITY - Static variable in class nxopen.cae.Result.Quantity
-
- dissociateItem(String, String) - Method in interface nxopen.mechatronics.SystemObject
-
Dissociate a specified item from this system object.
- DIST - Static variable in class nxopen.cam.OperationBuilder.OptimizationBasedOnTypes
-
dist
- distance() - Method in interface nxopen.annotations.HatchBuilder
-
- distance() - Method in interface nxopen.annotations.HatchFillSettingsBuilder
-
Returns the distance
License requirements: None.
- distance() - Method in interface nxopen.annotations.OffsetCenterPointBuilder
-
Returns the offset distance, valid for all offset method types except those by position
License requirements: None.
- distance() - Method in interface nxopen.assemblies.ProximitySearchTermBuilder
-
Returns
the distance.
- distance() - Method in interface nxopen.assemblies.RunContentProximitySearchTermBuilder
-
Returns
the distance for the proximity.
- distance() - Method in interface nxopen.cae.DurSpecialistLoadLengthBuilder
-
Returns the distance
License requirements: None.
- distance() - Method in interface nxopen.cae.ElementExtrudeBuilder
-
Returns the distance
License requirements: None.
- distance() - Method in interface nxopen.cae.ElementTranslateBuilder
-
Returns the total distance for translation along a vector
License requirements: None.
- distance() - Method in interface nxopen.cae.MeshPointMultipleOnCurveBuilder
-
Returns the distance
License requirements: None.
- distance() - Method in interface nxopen.cae.NodesOnCurveBuilder
-
Returns the distance
License requirements: None.
- distance() - Method in interface nxopen.cae.optimization.TBSTopologyRestrictAreaBuilder
-
Returns the distance value
License requirements: None.
- distance() - Method in interface nxopen.cam.AlongToolAxisMoveBuilder
-
Returns the location
License requirements: None.
- distance() - Method in interface nxopen.cam.BladeCutLevels
-
Returns the distance
License requirements: None.
- distance() - Method in interface nxopen.cam.BoundaryTurnMemberCorner
-
Returns the corner distance
License requirements: None.
- distance() - Method in interface nxopen.cam.BoundaryTurnMemberFineFinishCorner
-
Returns the fine_finish_corner distance
License requirements: None.
- distance() - Method in interface nxopen.cam.BoundaryTurnMemberOffset
-
Returns the offset distance (general and legacy)
License requirements: None.
- DISTANCE - Static variable in class nxopen.cam.BoundaryTurnVariableStock.PositionType
-
- DISTANCE - Static variable in class nxopen.cam.CenterlineDrillTurningBuilder.DepthTypes
-
Depth options: Distance
- DISTANCE - Static variable in class nxopen.cam.CircularAboutAxisMoveBuilder.ExtensionType
-
Distance
- distance() - Method in interface nxopen.cam.CycleTipRelease
-
Returns the coolant mode
License requirements: None.
- DISTANCE - Static variable in class nxopen.cam.CylinderMillingBuilder.BlankDiameterTypes
-
distance
- DISTANCE - Static variable in class nxopen.cam.CylinderMillingBuilder.DepthPerRevolutionTypes
-
Distance
- DISTANCE - Static variable in class nxopen.cam.DmAmBuilder.SteepOverlapOptTypes
-
Distance Overlap
- DISTANCE - Static variable in class nxopen.cam.DPMItpBuilder.StepoverTypeOption
-
stepover distance
- distance() - Method in interface nxopen.cam.ExtendAtEdges
-
Returns the Extend at Edges distance
License requirements: None.
- distance() - Method in interface nxopen.cam.InPathEventDataBuilder
-
Returns the Inpath Events Distance
License requirements: cam_base ("CAM BASE")
.
- DISTANCE - Static variable in class nxopen.cam.InspectionAlignmentBuilder.XtMethods
-
Translate a distance
- DISTANCE - Static variable in class nxopen.cam.InspectionAlignmentBuilder.YtMethods
-
Translate a distance
- DISTANCE - Static variable in class nxopen.cam.InspectionAlignmentBuilder.ZtMethods
-
Translate a distance
- DISTANCE - Static variable in class nxopen.cam.InspectionCurveFeatureBuilder.StartEndModeType
-
Distance
- DISTANCE - Static variable in class nxopen.cam.InspectionMethodBuilder.PolarRadiusModeTypes
-
Radius defined by distance value
- DISTANCE - Static variable in class nxopen.cam.InspectionMethodBuilder.UVModeTypes
-
Distance from start and end in part units
- DISTANCE - Static variable in class nxopen.cam.InspectionMoveBuilder.DepthMethodTypes
-
Distance only
- DISTANCE - Static variable in class nxopen.cam.InspectionSurfaceFeatureBuilder.StartEndModeType
-
Distance
- DISTANCE - Static variable in class nxopen.cam.IpwContainmentCurvesBuilder.ThicknessModeValue
-
use thickness mode distance
- distance() - Method in interface nxopen.cam.LaserLinearMove
-
Returns the Distance
License requirements: None.
- distance() - Method in interface nxopen.cam.MaxCutTraverse
-
Returns the max cut traverse distance
License requirements: None.
- DISTANCE - Static variable in class nxopen.cam.MaxCutTraverse.Types
-
distance
- distance - Variable in class nxopen.cam.MillingTrackpointBuilder.CalculateDistanceData
-
the distance
- distance - Variable in class nxopen.cam.MillingTrackpointBuilder.Data
-
the distance
- distance - Variable in class nxopen.cam.MillingTrackpointBuilder.TrackPointData
-
the distance
- distance() - Method in interface nxopen.cam.MinCutDepth
-
Returns the distance of Minimum Cut Depth
License requirements: None.
- distance() - Method in interface nxopen.cam.MinCutLength
-
Returns the distance of Minimum Cut Length
License requirements: None.
- distance - Variable in class nxopen.cam.MultipleStepoverBuilder.Data
-
the new value of distance
- DISTANCE - Static variable in class nxopen.cam.NcmHoleMachining.FinalTypes
-
distance
- DISTANCE - Static variable in class nxopen.cam.NcmHoleMachining.InitialTypes
-
distance
- DISTANCE - Static variable in class nxopen.cam.NcmPlanarBuilder.FinalTypes
-
distance
- DISTANCE - Static variable in class nxopen.cam.NcmPlanarBuilder.InitialTypes
-
distance
- DISTANCE - Static variable in class nxopen.cam.NcmScEngRetBuilder.MeasureFromTypes
-
Measure from distance
- DISTANCE - Static variable in class nxopen.cam.NcmTransferTypes.FinalTypes
-
distance
- DISTANCE - Static variable in class nxopen.cam.NcmTransferTypes.InitialTypes
-
distance
- distance() - Method in interface nxopen.cam.NormalToToolAxisMoveBuilder
-
Returns the distance
License requirements: None.
- distance() - Method in interface nxopen.cam.PitchSetting
-
Returns the distance
License requirements: None.
- distance() - Method in interface nxopen.cam.ReliefCut
-
Returns the relief cut distance
License requirements: None.
- distance() - Method in interface nxopen.cam.ReliefPlunge
-
Returns the relief plunge distance
License requirements: None.
- DISTANCE - Static variable in class nxopen.cam.ReliefPlunge.UnitTypes
-
Relief plunge Unit: inch or metric
- DISTANCE - Static variable in class nxopen.cam.RoughTurningBuilder.PartOffDepthModeTypes
-
Part Off Depth Mode: Distance
- distance() - Method in interface nxopen.cam.StepUpBuilder
-
Returns the parameter to define the step up distance
License requirements: None.
- distance() - Method in interface nxopen.cam.StopPosition
-
Returns the stop at distance
License requirements: None.
- DISTANCE - Static variable in class nxopen.cam.StopPosition.Types
-
Stop At mode: Distance
- DISTANCE - Static variable in class nxopen.cam.TrimPlane.LimitOptions
-
Plane is defined by a distance value.
- DISTANCE - Static variable in class nxopen.cam.TurnAvoidanceClearanceBuilder.AxialPlaneModes
-
Plane is defined by distance value.
- DISTANCE - Static variable in class nxopen.cam.TurnAvoidanceClearanceBuilder.RadialPlaneModes
-
Plane is defined by distance value.
- distance() - Method in interface nxopen.cam.TurnEngageRetractBuilder
-
Returns the Distance
License requirements: None.
- DISTANCE - Static variable in class nxopen.cam.TurnEngageRetractBuilder.ExtendMethods
-
Extend by distance
- DISTANCE - Static variable in class nxopen.cam.TurnFeatureGeomBuilder.SurfaceSensitivityModes
-
Surface sensitivity is active.
- DISTANCE - Static variable in class nxopen.cam.TurnGrooveCornerControl.ReliefPlungeTypes
-
Groove Corner Control Relief Plunge Type is Distance.
- distance() - Method in interface nxopen.cam.TurnOverlap
-
Returns the overlap distance
License requirements: None.
- DISTANCE - Static variable in class nxopen.cam.TurnOverlap.Types
-
Overlap mode: Distance (mm/inch)
- DISTANCE - Static variable in class nxopen.cam.TurnProbeClearanceBuilder.AxialPlaneModes
-
Plane is defined by distance value.
- DISTANCE - Static variable in class nxopen.cam.TurnProbeClearanceBuilder.RadialPlaneModes
-
Plane is defined by distance value.
- distance() - Method in interface nxopen.cam.TurnRoughFinishLocalReturnBuilder
-
Returns the local distance value
License requirements: None.
- DISTANCE - Static variable in class nxopen.cam.TurnRoughFinishLocalReturnBuilder.ModeTypes
-
Local Return: Distance
- distance() - Method in interface nxopen.cam.VectorDistanceMoveBuilder
-
Returns the Distance
License requirements: None.
- DISTANCE - Static variable in class nxopen.cam.VectorDistanceMoveBuilder.EndType
-
end at distance
- distance() - Method in interface nxopen.cam.VerticalPosition
-
Returns the distance
License requirements: None.
- DISTANCE - Static variable in class nxopen.cam.VerticalPosition.OffsetTypes
-
Distance
- DISTANCE - Static variable in class nxopen.DatumConstraint.CurveOption
-
Absolute distance
- DISTANCE - Static variable in class nxopen.DatumConstraint.Type
-
- distance() - Method in interface nxopen.die.ClearanceBuilder
-
Returns the expression containing the distance value for extrusions when defining the clearance area.
- DISTANCE - Static variable in class nxopen.ExtrudeLimitDataLimitType
-
- distance() - Method in interface nxopen.facet.CreateTransitionBuilder
-
Returns the distance.
- distance() - Method in interface nxopen.facet.ExtrudeFacetBodyBuilder
-
- DISTANCE - Static variable in class nxopen.facet.ExtrudeFacetBodyBuilder.LimitType
-
Specify the limit by direction and distance.
- distance() - Method in interface nxopen.features.AdmOffsetRegionBuilder
-
Returns the offset distance
License requirements: None.
- DISTANCE - Static variable in class nxopen.features.DatumAxisBuilder.ConstraintType
-
Distance constraint
- DISTANCE - Static variable in class nxopen.features.DatumAxisBuilder.CurveOption
-
Absolute distance
- DISTANCE - Static variable in class nxopen.features.DatumPlaneBuilder.ConstraintType
-
Distance constraint
- DISTANCE - Static variable in class nxopen.features.DatumPlaneBuilder.CurveOption
-
Absolute distance.
- distance() - Method in interface nxopen.features.EmbossLimit
-
Returns the default distance for offset or translation
License requirements: None.
- distance() - Method in interface nxopen.features.EmbossTarget
-
Returns the offset/translate distance
License requirements: None.
- distance() - Method in interface nxopen.features.GeodesicChamferBuilder
-
Returns the distance
License requirements: None.
- DISTANCE - Static variable in class nxopen.features.GlobalShapingBuilder.RotationMethodType
-
Rotation specified by distance
- distance() - Method in interface nxopen.features.LocalScaleCurveBuilder
-
Returns the distance
License requirements: None.
- distance() - Method in interface nxopen.features.MoveFaceBuilder
-
Returns the distance for direction and distance option, don't use it until nx502
License requirements: None.
- DISTANCE - Static variable in class nxopen.features.OffsetCurveBuilder.Types
-
Distance
- distance() - Method in interface nxopen.features.OffsetEdgeBuilder
-
Returns the distance for offset edge
License requirements: None.
- distance() - Method in interface nxopen.features.OffsetFaceBuilder
-
Returns the distance
License requirements: None.
- distance() - Method in interface nxopen.features.OffsetFacetBodyBuilder
-
Returns the distance
License requirements: None.
- distance() - Method in interface nxopen.features.OffsetMoveCurveBuilder
-
Returns the offset distance
License requirements: None.
- distance() - Method in interface nxopen.features.OffsetRegionBuilder
-
Returns the distance to offset, don't use it until nx502
License requirements: None.
- distance() - Method in interface nxopen.features.PatchOpeningsBuilder
-
- distance() - Method in interface nxopen.features.SectionInertiaAnalysisBuilder
-
Returns the distance
License requirements: None.
- DISTANCE - Static variable in class nxopen.features.sheetmetal.AeroFlangeBuilder.CompType
-
Distance
- DISTANCE - Static variable in class nxopen.features.sheetmetal.BendTaperBuilder.BendTaperInputMethod
-
Distance
- distance() - Method in interface nxopen.features.shipdesign.OrientationPointMethodsBuilder
-
Returns the distance used to determine the boundary of the region.
- distance() - Method in interface nxopen.features.subdivision.SubdivisionExtrudeCageBuilder
-
Returns the distance.
- DISTANCE - Static variable in class nxopen.geometricutilities.AlignmentMethodBuilder.Type
-
- distance() - Method in interface nxopen.geometricutilities.AngularLimits
-
Returns a computed distance
License requirements: solid_modeling ("SOLIDS MODELING")
.
- DISTANCE - Static variable in class nxopen.geometricutilities.AngularPatternSpacing.UsePitchOptions
-
distance is pitch value.
- distance() - Method in interface nxopen.geometricutilities.CurveExtendData
-
Returns the distance
License requirements: None.
- distance() - Method in interface nxopen.geometricutilities.ModlDistanceAngle
-
Returns the distance of linear transform.
- DISTANCE - Static variable in class nxopen.geometricutilities.ModlMotion.Options
-
Move by Distance
- DISTANCE - Static variable in class nxopen.MeasureDistanceBuilder.DistanceType
-
- distance - Variable in class nxopen.Measurement.MinimumDistanceData
-
minimum distance between two objects
- distance - Variable in class nxopen.Measurement.MinimumOrthogonalDistanceData
-
Minimum orthogonal distance between input point and face or edge
- DISTANCE - Static variable in class nxopen.motion.LinkCouplerCoupleBuilder.MeasurementChoices
-
Distance
- DISTANCE - Static variable in class nxopen.PlaneTypes.MethodType
-
Distance method
- DISTANCE - Static variable in class nxopen.PointCollection.AlongCurveOption
-
Scalar is an absolute distance.
- DISTANCE - Static variable in class nxopen.positioning.Constraint.Type
-
Two geometries have a specified distance between them
- distance() - Method in interface nxopen.routing.OverstockBuilder
-
- distance() - Method in interface nxopen.SketchOffsetBuilder
-
Returns the offset distance expression
License requirements: None.
- DISTANCE - Static variable in class nxopen.tooling.ChannelAdjustBuilder.AdjustType
-
Reposition the target channels.
- distance() - Method in interface nxopen.tooling.ChannelAdjustBuilder
-
Returns the distance between the channels and faces.
- distance - Variable in class nxopen.uf.UFCutter.TrackingPointData
-
- distance - Variable in class nxopen.uf.UFDraw.BreakRegionData
-
- distance - Variable in class nxopen.uf.UFDrf.DraftAidTextInfo
-
- distance - Variable in class nxopen.uf.UFEvalsf.Pos3
-
- distance - Variable in class nxopen.uf.UFGdt.AskTargetAreaXhatchData
-
- distance - Variable in class nxopen.uf.UFModl.AskBallSlotParmsData
-
- distance - Variable in class nxopen.uf.UFModl.AskDovetailSlotParmsData
-
- distance - Variable in class nxopen.uf.UFModl.AskRectSlotParmsData
-
- distance - Variable in class nxopen.uf.UFModl.AskTSlotParmsData
-
- distance - Variable in class nxopen.uf.UFModl.AskUSlotParmsData
-
- distance - Variable in class nxopen.uf.UFModl.EdgeBlendSetbackData
-
- distance - Variable in class nxopen.uf.UFModl.EdgeBlendStopshortData
-
- distance(double[], double[]) - Method in interface nxopen.uf.UFVec2
-
- distance(double[], double[]) - Method in interface nxopen.uf.UFVec3
-
- distance - Variable in class nxopen.uf.UFView.AskPerspectiveData
-
- DISTANCE - Static variable in class nxopen.weld.JointmarkGuideBuilder.SpaceOption
-
Space points by a fixed distance.
- DISTANCE - Static variable in class nxopen.weld.WeldPointSpacingMethod
-
Place multiple spot welds based on distance
- distance1() - Method in interface nxopen.features.sheetmetal.FlangeBendPropertiesBuilder
-
Returns the distance1
License requirements: None.
- distance1() - Method in interface nxopen.SketchChamferBuilder
-
Returns the distance for line 1 for Symmetric, Asymmetric, and for OffSet and Angle Chamfer
License requirements: drafting ("DRAFTING") OR solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- distance1 - Variable in class nxopen.uf.UFCurve.Bcmmcp
-
- distance2() - Method in interface nxopen.features.sheetmetal.FlangeBendPropertiesBuilder
-
Returns the distance2
License requirements: None.
- distance2() - Method in interface nxopen.SketchChamferBuilder
-
Returns the distance for line 2 for Asymmetric Chamfer
License requirements: drafting ("DRAFTING") OR solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- distance2 - Variable in class nxopen.uf.UFCurve.Bcmmcp
-
- DISTANCE_ALLOWANCE - Static variable in class nxopen.tooling.WorkpieceBuilder.MethodType
-
Create block by define the distance allowance
- DISTANCE_ALONG_NORMAL - Static variable in class nxopen.cae.ConvexMeshBuilder.OffsetMethodOption
-
Deprecated.
- DISTANCE_ANGLE - Static variable in class nxopen.geometricutilities.ModlMotion.Options
-
Move by Distance-Angle
- DISTANCE_BETWEEN - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.TolType
-
Distance Between
- DISTANCE_BETWEEN_FLANGES - Static variable in class nxopen.cae.connections.HeightType
-
Distance between flanges
- DISTANCE_BETWEEN_FLANGES_MAX_OF_FLANGES_THICKNESS - Static variable in class nxopen.cae.connections.HeightType
-
Distance between flanges - Max of flanges thickness
- DISTANCE_BETWEEN_FLANGES_MEAN_OF_FLANGES_THICKNESS - Static variable in class nxopen.cae.connections.HeightType
-
Distance between flanges - Mean of flanges thickness
- DISTANCE_BETWEEN_POINTS - Static variable in class nxopen.geometricutilities.ModlMotion.Options
-
Move by Distance between Points
- DISTANCE_DIM - Static variable in class nxopen.uf.UFModl.DfoConstraintType
-
- DISTANCE_FROM_END - Static variable in class nxopen.cam.InPathEventDataBuilder.LocationMethod
-
Distance From End
- DISTANCE_FROM_START - Static variable in class nxopen.cam.InPathEventDataBuilder.LocationMethod
-
Distance From Start
- DISTANCE_MEASUREMENT - Static variable in class nxopen.uf.UFMotion.MeasurementType
-
- DISTANCE_METHOD - Static variable in class nxopen.annotations.Centerline2dBuilder.Offset
-
offset distance method
- DISTANCE_METHOD - Static variable in class nxopen.annotations.Centerline3dBuilder.Offset
-
Offset Distance
- DISTANCE_OR_TIME - Static variable in class nxopen.cam.TurnRoughFinishLocalReturnBuilder.LimitTypes
-
mm,inch or sec
- DISTANCE_TO_WALL - Static variable in class nxopen.cam.ReliefPlunge.Types
-
Relief plunge: Distance to Wall
- DistanceAnalysisBuilder - Interface in nxopen.geometricanalysis
-
Represents a Distance Analysis builder.
- DistanceAnalysisBuilder.DisplayModes - Class in nxopen.geometricanalysis
-
The display type.
- distanceAngle() - Method in interface nxopen.geometricutilities.ModlMotion
-
- distanceAngleDivision() - Method in interface nxopen.cam.InspectionOperationTransformBuilder
-
Returns the distance angle division
License requirements: None.
- distanceAngleDivision() - Method in interface nxopen.cam.OperationTransformBuilder
-
Returns the distance angle division
License requirements: None.
- distanceBelow() - Method in interface nxopen.cam.CutLevel
-
Returns the distance below the bottom of the last range
License requirements: None.
- distanceBetween() - Method in interface nxopen.cae.WeldBuilder
-
Returns the distance between the points on the edge(s) used to specify the location of the weld
License requirements: None.
- distanceBetweenAnnotations() - Method in interface nxopen.drafting.AutomationPreferencesBuilder
-
Returns the distance between annotations
License requirements: None.
- distanceBetweenPointsDistance() - Method in interface nxopen.geometricutilities.ModlMotion
-
- distanceBetweenPointsMeasurePoint() - Method in interface nxopen.geometricutilities.ModlMotion
-
- distanceBetweenPointsOriginDistance() - Method in interface nxopen.geometricutilities.ModlMotion
-
- distanceBetweenPointsOriginPoint() - Method in interface nxopen.geometricutilities.ModlMotion
-
- distanceBetweenPointsVector() - Method in interface nxopen.geometricutilities.ModlMotion
-
- distanceBetweenSymbolAndDimensionText() - Method in interface nxopen.annotations.DiameterRadiusPreferences
-
Returns the distance between diameter/radius symbol and dimension text
License requirements: None.
- distanceBuilder() - Method in interface nxopen.cam.StepoverBuilder
-
Returns the distance (inheritable tool dependent)
License requirements: None.
- distanceCollector1() - Method in interface nxopen.MeasureDistanceBuilder
-
Returns the first collector of objects for distance between two collectors
License requirements: None.
- distanceCollector2() - Method in interface nxopen.MeasureDistanceBuilder
-
Returns the second collector of objects for distance between two collectors
License requirements: None.
- distanceCopyOption() - Method in interface nxopen.cae.ElementRotateBuilder
-
Returns the distance option
License requirements: None.
- distanceEnum() - Method in interface nxopen.cae.CorrelFineTuneAlignmentBuilder
-
Returns the distance vector enumeration
License requirements: None.
- distanceExp() - Method in interface nxopen.cae.CorrelFineTuneAlignmentBuilder
-
Returns the distance expression
License requirements: None.
- distanceExp - Variable in class nxopen.features.EdgeBlendBuilder.SetbackData
-
The distance for the setback on each edge.
- distanceExp - Variable in class nxopen.features.EdgeBlendBuilder.StopshortData
-
The distance for the stopshort on the edge.
- distanceExp - Variable in class nxopen.uf.UFModl.EdgeBlendSetbackData
-
- distanceExp - Variable in class nxopen.uf.UFModl.EdgeBlendStopshortData
-
- distanceFromBoundary() - Method in interface nxopen.cam.BoundaryTurnVariableStockSet
-
Returns the distance from boundary
License requirements: None.
- distanceFromCenterline() - Method in interface nxopen.linedesigner.PlatformEquipmentBuilder
-
Returns the distance of platform from centerline
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- distanceFromEnd() - Method in interface nxopen.weld.GrooveBuilder
-
- distanceFromEnds() - Method in interface nxopen.weld.AutoPointBuilder
-
Returns the distance from the ends to start creating weld points at
License requirements: None.
- distanceFromFloor() - Method in interface nxopen.cam.CutLevelPlanar
-
Returns the distance from floor
License requirements: None.
- distanceFromInnerBorder() - Method in interface nxopen.diagramming.SheetBorderSettingsBuilder
-
Returns the distance between inner border and arrow head.
- distanceFromInnerBorder() - Method in interface nxopen.drawings.SheetBorderSettingsBuilder
-
Returns the distance from inner border
License requirements: None.
- distanceFromStart() - Method in interface nxopen.cae.connections.ILineDiscretization
-
Returns the line Discretization distance from start
License requirements: None.
- distanceFromStart() - Method in interface nxopen.weld.GrooveBuilder
-
- distanceFromTop() - Method in interface nxopen.cam.CutLevelPlanar
-
Returns the distance from top
License requirements: None.
- distanceFromVehicle() - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder
-
Returns the expression containing the value for the distance from vehicle.
- distanceFromViewPlane() - Method in interface nxopen.drawings.ViewCopyTo3dBuilder
-
Returns the option specifying the distance from the view plane
License requirements: None.
- distanceLimit() - Method in interface nxopen.cam.ToolPathDivideBuilder
-
Returns the time limit value
License requirements: None.
- distanceLock() - Method in interface nxopen.routing.OverstockBuilder
-
Returns the distance lock state.
- distanceMaximumBuilder() - Method in interface nxopen.cam.StepoverBuilder
-
Returns the distance maximum(inheritable tool dependent)
License requirements: None.
- distanceMinimumBuilder() - Method in interface nxopen.cam.StepoverBuilder
-
Returns the distance minimum(inheritable tool dependent)
License requirements: None.
- distanceOption() - Method in interface nxopen.cae.ElementExtrudeBuilder
-
Returns the distance option
License requirements: None.
- distanceOption() - Method in interface nxopen.cae.ElementTranslateBuilder
-
Returns the distance option
License requirements: None.
- distanceOption() - Method in interface nxopen.cae.NodeRotateBuilder
-
Returns the distance option
License requirements: None.
- distanceOption() - Method in interface nxopen.cae.NodeTranslateBuilder
-
Returns the distance option
License requirements: None.
- DistancePatternSpacing - Interface in nxopen.geometricutilities
-
defines the various ways pattern instances can be
spaced within the pattern, particularly in the context of the
PatternDefinition class.
- distancePitch() - Method in interface nxopen.geometricutilities.HelixPattern
-
Returns the distance pitch expression for the Helix type pattern
License requirements: None.
- distances - Variable in class nxopen.uf.UFModlGeneral.AskBoundingBoxAlignedData
-
- distances - Variable in class nxopen.uf.UFModlGeneral.AskBoundingBoxExactData
-
- distances - Variable in class nxopen.uf.UFView.AskZClipData
-
- DistanceSensor - Interface in nxopen.mechatronics
-
Represents the Distance Sensor.
- DistanceSensorBuilder - Interface in nxopen.mechatronics
-
- DistanceSensorBuilder.OutputMeasureType - Class in nxopen.mechatronics
-
the Measure types.
- DistanceSensorCollection - Interface in nxopen.mechatronics
-
Represents a collection of Distance Sensor.
- distanceSensors() - Method in interface nxopen.mechatronics.PhysicsManager
-
- distanceThreshold() - Method in interface nxopen.features.IsoclineCurveBuilder
-
Returns the distance threshold
License requirements: None.
- distanceThreshold() - Method in interface nxopen.features.OptimizeCurveBuilder
-
Returns the distance threshold
License requirements: None.
- distanceThreshold() - Method in interface nxopen.features.SmoothCurveStringBuilder
-
Returns the searching distance threshold when trying to connect curves.
- distanceThreshold() - Method in interface nxopen.geometricanalysis.CurveContinuityBuilder
-
Returns the distance threshold
License requirements: None.
- distanceThreshold() - Method in interface nxopen.geometricanalysis.SurfaceContinuityAnalysisBuilder
-
Returns the distance threshold
License requirements: None.
- distanceToEdgeMidpoint() - Method in interface nxopen.tooling.WireHoleBuilder
-
Returns the distance to edge midpoint
License requirements: None.
- distanceToEnd() - Method in interface nxopen.cae.connections.ILineDiscretization
-
Returns the line Discretization distance to end
License requirements: None.
- distanceTol() - Method in interface nxopen.features.SphericalCornerBuilder
-
Returns the Distance Tolerance
License requirements: None.
- distanceTol - Variable in class nxopen.uf.UFCurve.WrapData
-
- distanceTolerance() - Method in interface nxopen.annotations.BoundaryBuilder
-
Returns the distance tolerance
License requirements: None.
- distanceTolerance() - Method in interface nxopen.cae.QueryCurveUsageOptions
-
Returns the distance to mesh tolerance
License requirements: None.
- distanceTolerance() - Method in interface nxopen.cam.InspectionOperationTransformBuilder
-
Returns the tolerance used for checking distance of transformed geometry
License requirements: None.
- distanceTolerance() - Method in interface nxopen.cam.NCAssistantBuilder
-
Returns the Distance Tolerance
License requirements: None.
- distanceTolerance() - Method in interface nxopen.cam.Topology
-
Returns the distance tolerance
License requirements: None.
- distanceTolerance() - Method in interface nxopen.die.AddendumSectionBuilder
-
Returns the distance tolerance.
- distanceTolerance() - Method in interface nxopen.die.AddSurfBuilder
-
Returns the distance tolerance.
- distanceTolerance() - Method in interface nxopen.die.CastReliefBuilder
-
Returns the distance tolerance
License requirements: None.
- distanceTolerance() - Method in interface nxopen.die.ClampingSlotBuilder
-
Returns the distance tolerance
License requirements: None.
- distanceTolerance() - Method in interface nxopen.die.ClearanceBuilder
-
Returns the distance tolerance.
- distanceTolerance() - Method in interface nxopen.die.CompensateRoughDataBuilder
-
Returns the distance tolerance.
- distanceTolerance() - Method in interface nxopen.die.DieShoeBuilder
-
Returns the distance tolerance
License requirements: None.
- distanceTolerance() - Method in interface nxopen.die.DrawBeadBuilder
-
Returns the distance tolerance.
- distanceTolerance() - Method in interface nxopen.die.DrawDiePunchBuilder
-
Returns the distance tolerance of the draw die punch casting.
- distanceTolerance() - Method in interface nxopen.die.FillAreaBuilder
-
Returns the distance tolerance.
- distanceTolerance() - Method in interface nxopen.die.FillBuilder
-
Returns the distance tolerance of the area fill
License requirements: die_engineering ("DIE ENGINEERING")
.
- distanceTolerance() - Method in interface nxopen.die.FingerClearanceNotchBuilder
-
Returns the distance tolerance.
- distanceTolerance() - Method in interface nxopen.die.FlangeTaskBuilder
-
Returns the distance tolerance of the flange task
License requirements: die_engineering ("DIE ENGINEERING")
.
- distanceTolerance() - Method in interface nxopen.die.FormTaskBuilder
-
Returns the distance tolerance of the form task.
- distanceTolerance() - Method in interface nxopen.die.HandlingCoreBuilder
-
Returns the distance tolerance.
- distanceTolerance() - Method in interface nxopen.die.HeelpostBuilder
-
Returns the distance tolerance
License requirements: None.
- distanceTolerance() - Method in interface nxopen.die.KeywayBuilder
-
Returns the distance tolerance
License requirements: None.
- distanceTolerance() - Method in interface nxopen.die.MachineReliefBuilder
-
Returns the distance tolerance.
- distanceTolerance() - Method in interface nxopen.die.OutputCurvesBuilder
-
Returns the distance tolerance.
- distanceTolerance() - Method in interface nxopen.die.PierceTaskBuilder
-
Returns the distance tolerance of the pierce task
License requirements: die_engineering ("DIE ENGINEERING")
.
- distanceTolerance() - Method in interface nxopen.die.RotorBuilder
-
Returns the distance tolerance of the rotor casting.
- distanceTolerance() - Method in interface nxopen.die.SpringbackCompensationBuilder
-
Returns the distance tolerance.
- distanceTolerance() - Method in interface nxopen.die.SteelInsertBuilder
-
Returns the distance tolerance of the diesteelinsert casting
License requirements: ug_die_design ("Die Design")
.
- distanceTolerance() - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
Returns the distance tolerance.
- distanceTolerance() - Method in interface nxopen.die.TrimTaskBuilder
-
Returns the distance tolerance of the trim task
License requirements: die_engineering ("DIE ENGINEERING")
.
- distanceTolerance - Variable in class nxopen.FaceRegionBoundaryRule.Data
-
Distance tolerance
- distanceTolerance() - Method in interface nxopen.facet.BridgeFacetBodyBuilder
-
Returns the distance tolerance used in the bridge facet body feature
License requirements: None.
- distanceTolerance() - Method in interface nxopen.facet.CleanupFacetBodyBuilder
-
Returns the tolerance value use to detect the faults in facet body and fix the same
License requirements: None.
- distanceTolerance() - Method in interface nxopen.facet.ExtrudeFacetBodyBuilder
-
Returns the distance tolerance used in the extrude facet body feature
License requirements: None.
- distanceTolerance() - Method in interface nxopen.facet.MergeFacetBodyBuilder
-
Returns the distance tolerance used in the merge facet body feature
License requirements: None.
- distanceTolerance() - Method in interface nxopen.facet.SewFacetBodyBuilder
-
Returns the distance tolerance used in the merge touching facet body feature
License requirements: None.
- distanceTolerance() - Method in interface nxopen.features.AOCSBuilder
-
Returns the distance tolerance for the AOCS operation.
- distanceTolerance() - Method in interface nxopen.features.BlendCornerBuilder
-
Returns the distance tolerance.
- distanceTolerance() - Method in interface nxopen.features.CircularBlendCurveBuilder
-
Returns the distance tolerance
License requirements: None.
- distanceTolerance() - Method in interface nxopen.features.ConcaveFacesBuilder
-
Returns the distance tolerance.
- distanceTolerance() - Method in interface nxopen.features.CurveLengthBuilder
-
Returns the distance tolerance
License requirements: solid_modeling ("SOLIDS MODELING")
.
- distanceTolerance() - Method in interface nxopen.features.CurveOnSurfaceBuilder
-
Returns the distance tolerance
License requirements: solid_modeling ("SOLIDS MODELING")
.
- distanceTolerance() - Method in interface nxopen.features.DraftBuilder
-
Returns the distance tolerance in [in/mm]
License requirements: solid_modeling ("SOLIDS MODELING")
.
- distanceTolerance() - Method in interface nxopen.features.ExtendSheetBuilder
-
Returns the distance tolerance
License requirements: None.
- distanceTolerance() - Method in interface nxopen.features.ExtrudeBuilder
-
Returns the distance tolerance
License requirements: None.
- distanceTolerance() - Method in interface nxopen.features.FreeTransformerBuilder
-
Returns the distance tolerance used in the transformation or morphing calculations
License requirements: None.
- distanceTolerance() - Method in interface nxopen.features.GlobalShapingBuilder
-
Returns the distance tolerance
License requirements: None.
- distanceTolerance() - Method in interface nxopen.features.GuidedExtensionBuilderEx
-
Returns the distance tolerance for use in creating the guided extension surfaces
License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_2 ("advanced freeform modeling") OR ug_mold_design ("UG MOLD") OR die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- distanceTolerance() - Method in interface nxopen.features.HelixBuilder
-
Returns the distance tolerance
License requirements: None.
- distanceTolerance() - Method in interface nxopen.features.JoinCurvesBuilder
-
Returns the distance tolerance.
- distanceTolerance() - Method in interface nxopen.features.LawCurveBuilder
-
Returns the distance tolerance
License requirements: None.
- distanceTolerance() - Method in interface nxopen.features.LawExtensionBuilder
-
Returns the distance tolerance
License requirements: solid_modeling ("SOLIDS MODELING") OR free_form_modeling ("FREE-FORM MODELING")
.
- distanceTolerance() - Method in interface nxopen.features.LawExtensionBuilderEx
-
Returns the distance tolerance
License requirements: None.
- distanceTolerance() - Method in interface nxopen.features.LocalScaleCurveBuilder
-
Returns the distance tolerance
License requirements: None.
- distanceTolerance() - Method in interface nxopen.features.MatchEdgeBuilder
-
Returns the tolerance for extracting BSurface from a face
License requirements: features_modeling ("FEATURES MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- distanceTolerance() - Method in interface nxopen.features.MeshTransformerBuilder
-
Returns the distance tolerance used in the transformation or morphing calculations
License requirements: None.
- distanceTolerance() - Method in interface nxopen.features.MoveCurveBuilder
-
Returns the distance tolerance
License requirements: None.
- distanceTolerance() - Method in interface nxopen.features.OffsetEmbossBuilder
-
Returns the distance tolerance:
The maximum allowable distance between the true theoretical sheet and the body created to approximate it.
- distanceTolerance() - Method in interface nxopen.features.OffsetMoveCurveBuilder
-
Returns the distance tolerance
License requirements: None.
- distanceTolerance() - Method in interface nxopen.features.OptimizeFaceBuilder
-
Returns the distance tolerance
License requirements: None.
- distanceTolerance() - Method in interface nxopen.features.OvercrownBuilder
-
Returns the distance tolerance
License requirements: solid_modeling ("SOLIDS MODELING")
.
- distanceTolerance() - Method in interface nxopen.features.PatchOpeningsBuilder
-
Returns the distance tolerance.
- distanceTolerance() - Method in interface nxopen.features.PointSetBuilder
-
Returns the distance tolerance.
- distanceTolerance() - Method in interface nxopen.features.ResizeCurveBuilder
-
Returns the distance tolerance
License requirements: None.
- distanceTolerance() - Method in interface nxopen.features.RibbonBuilder
-
Returns the distance tolerance
License requirements: None.
- distanceTolerance() - Method in interface nxopen.features.shipdesign.AlongGuideCutBuilder
-
Returns the distance tolerance.
- distanceTolerance() - Method in interface nxopen.features.shipdesign.BracketBuilder
-
Returns the distance tolerance (part units)
The distance tolerance is used for:
bracket placement orign and orientation evaluation
bracket geometry construction
License requirements: None.
- distanceTolerance() - Method in interface nxopen.features.shipdesign.CollarPlateBuilder
-
Returns the distance tolerance (part units)
The distance tolerance is used for:
collar plate placement orign and orientation evaluation
collar plate geometry construction
License requirements: None.
- distanceTolerance() - Method in interface nxopen.features.shipdesign.CornerCutBuilder
-
Returns the distance tolerance.
- distanceTolerance() - Method in interface nxopen.features.shipdesign.CuttingSideFacesBuilder
-
Returns the modeling distance tolerance.
- distanceTolerance() - Method in interface nxopen.features.shipdesign.FeatureParmsBuilder
-
Returns the tolerance used to determine when distances are considered zero.
- distanceTolerance() - Method in interface nxopen.features.shipdesign.MarkingLineDesignBuilder
-
Returns the distance tolerance for marking lines.
- distanceTolerance() - Method in interface nxopen.features.shipdesign.OrientationDefinitionBuilder
-
Returns the distance tolerance used in the orientation objects to determine if locations are coincident.
- distanceTolerance() - Method in interface nxopen.features.shipdesign.PillarBuilder
-
Returns the distance tolerance.
- distanceTolerance() - Method in interface nxopen.features.shipdesign.PlateBuilder
-
Returns the distance tolerance.
- distanceTolerance() - Method in interface nxopen.features.shipdesign.PlateDivideBuilder
-
Returns the distance tolerance.
- distanceTolerance() - Method in interface nxopen.features.shipdesign.ProfileBuilder
-
Returns the distance tolerance (part units).
- distanceTolerance() - Method in interface nxopen.features.shipdesign.ProfileCutoutBuilder
-
Returns the distance tolerance (part units).
- distanceTolerance() - Method in interface nxopen.features.shipdesign.ProfileTransitionBuilder
-
Returns the distance tolerance (part units)
License requirements: None.
- distanceTolerance() - Method in interface nxopen.features.shipdesign.RollingLineBuilder
-
Returns the modeling distance tolerance.
- distanceTolerance() - Method in interface nxopen.features.shipdesign.RoomBuilder
-
Returns the distance tolerance which is used in room body creation.
- distanceTolerance() - Method in interface nxopen.features.shipdesign.ShellTemplateBuilder
-
Returns the modeling distance tolerance.
- distanceTolerance() - Method in interface nxopen.features.shipdesign.ShipPreparationBuilder
-
Returns the distance tolerance.
- distanceTolerance() - Method in interface nxopen.features.shipdesign.SplitProfilePlateBuilder
-
Returns the distance tolerance to determine if a profile is attached to a plate
License requirements: None.
- distanceTolerance() - Method in interface nxopen.features.shipdesign.SplitStandardPartBuilder
-
Returns the tolerance used to determine when distances are considered zero.
- distanceTolerance() - Method in interface nxopen.features.shipdesign.SteelInsulationBuilder
-
Returns the modeling distance tolerance.
- distanceTolerance() - Method in interface nxopen.features.shipdesign.StiffenerBuilder
-
Returns the distance tolerance (part units)
License requirements: None.
- distanceTolerance() - Method in interface nxopen.features.shipdesign.WeldCut2Builder
-
Returns the distance tolerance.
- distanceTolerance() - Method in interface nxopen.features.SweepAlongGuideBuilder
-
Returns the distance tolerance
License requirements: None.
- distanceTolerance() - Method in interface nxopen.features.SweptVolumeBuilder
-
Returns the Distance Tolerance
License requirements: None.
- distanceTolerance() - Method in interface nxopen.features.TrimAndExtendBuilder
-
Returns the distance tolerance
License requirements: None.
- distanceTolerance() - Method in interface nxopen.features.VariableOffsetBuilder
-
Returns the distance tolerance.
- distanceTolerance() - Method in interface nxopen.features.VarsweepBuilder
-
Returns the distance tolerance
License requirements: None.
- distanceTolerance() - Method in interface nxopen.features.vehicledesign.AllAroundVisionBuilder
-
Returns the distance tolerance.
- distanceTolerance() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
Returns the distance tolerance that will be used in constructing the motion envelope.
- distanceTolerance() - Method in interface nxopen.features.WrapBuilder
-
Returns the distance tolerance used to determine the sampling of the curve during processing, and
the accuracy of the output.
- distanceTolerance() - Method in interface nxopen.geometricanalysis.DeviationChecking
-
Returns the distance tolerance to be used for the deviation checking
License requirements: None.
- distanceTolerance() - Method in interface nxopen.geometricutilities.MatchSurfaceBuilder
-
Returns the distance tolerance
License requirements: None.
- distanceTolerance - Variable in class nxopen.RegionBoundaryRule.Data
-
Distance tolerance
- distanceTolerance() - Method in interface nxopen.Section
-
Returns the distance tolerance
License requirements: gateway ("UG GATEWAY")
.
- distanceTolerance() - Method in interface nxopen.sim.SinumerikCaSimplifyBodiesBuilder
-
Returns the Distance tolerance used to facet the solids.
- distanceTolerance() - Method in interface nxopen.SketchAutoConstrainBuilder
-
Returns the distance tolerance
License requirements: None.
- distanceTolerance() - Method in interface nxopen.SketchEvaluator
-
Returns the distance tolerance
License requirements: None.
- distanceTolerance() - Method in interface nxopen.SketchIntersectionCurveBuilder
-
Returns the distance tolerance
License requirements: None.
- distanceTolerance() - Method in interface nxopen.tooling.BlendCurve3DBuilder
-
Returns the distance tolerance.
- distanceTolerance() - Method in interface nxopen.tooling.GuidedExtensionBuilder
-
Returns the distance tolerance for use in creating the guided extension surfaces
License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_2 ("advanced freeform modeling") OR ug_mold_design ("UG MOLD") OR die_engineering ("DIE ENGINEERING")
.
- distanceTolerance() - Method in interface nxopen.tooling.OffsetCurve3DBuilder
-
- distanceTolerance - Variable in class nxopen.uf.UFModlFeatures.AskTaperFromEdges1Data
-
- distanceTolerance() - Method in interface nxopen.weld.EasyPatternBuilder
-
Returns the distance tolerance.
- distanceTolerance() - Method in interface nxopen.weld.JointmarkBuilder
-
Returns the distance tolerance
License requirements: ugweld ("UG WELD")
.
- distanceTolerance() - Method in interface nxopen.weld.SurfaceWeldBuilder
-
Returns the distance tolerance for constructing the surface weld.
- distanceTolerance() - Method in interface nxopen.weld.WeldBeadBuilder
-
Returns the distance tolerance for constructing the bead.
- distanceTolerance() - Method in interface nxopen.weld.WeldFillBuilder
-
Returns the distance tolerance used in processing to determine if two points are coincident.
- distanceTolerance() - Method in interface nxopen.weld.WeldGrooveBuilder
-
Returns the distance tolerance
License requirements: ugweld ("UG WELD")
.
- distanceTolerance() - Method in interface nxopen.weld.WeldPointBuilder
-
Returns the distance tolerance for the weld point
License requirements: ugweld ("UG WELD")
.
- distanceToleranceData() - Method in interface nxopen.preferences.PartModeling
-
Returns the modeling distance tolerance data.
- distanceToPlane(double[], double[], double[], double) - Method in interface nxopen.uf.UFVec3
-
- distanceToRoadGeneral() - Method in interface nxopen.features.vehicledesign.GroundClearanceBuilder
-
Returns the expression that contains the value which indicates the distance from general surface to road general.
- distanceToRoadUnderAxle() - Method in interface nxopen.features.vehicledesign.GroundClearanceBuilder
-
Returns the expression that contains the value which indicates the distance from the under axle surface to road.
- distanceType() - Method in interface nxopen.cae.DurSpecialistLoadLengthBuilder
-
Returns the distance type.
- distanceType() - Method in interface nxopen.cam.BoundaryTurnMemberOffset
-
Returns the offset distance type (general and legacy)
License requirements: None.
- distanceType() - Method in interface nxopen.features.ExtensionBuilder
-
Returns the distance type
License requirements: None.
- distanceUnit() - Method in interface nxopen.cam.ReliefCut
-
Returns the relief cut distance unit
License requirements: None.
- distanceValue() - Method in interface nxopen.features.ResizeChamferCurveBuilder
-
Returns the distance value
License requirements: None.
- distanceValue() - Method in interface nxopen.geometricutilities.ModlMotion
-
- distanceVector() - Method in interface nxopen.geometricutilities.ModlMotion
-
- distanceX() - Method in interface nxopen.tooling.QuickQuotationBuilder
-
Returns the distance between sub die base and die base edge in X direction.
- distanceX - Variable in class nxopen.uf.UFModlGeneral.AskLinearIsetParmsData
-
- distanceY() - Method in interface nxopen.tooling.QuickQuotationBuilder
-
Returns the distance between sub die base and die base edge in Y direction.
- distanceY - Variable in class nxopen.uf.UFModlGeneral.AskLinearIsetParmsData
-
- DISTANT - Static variable in class nxopen.LightType
-
A distant light can be thought of as being
located for all practical purposes infinitely far away,
such as the sun.
- DISTANT_LIGHT - Static variable in class nxopen.uf.UFView.LightType
-
- disToolEndProj() - Method in interface nxopen.cam.DmBndBuilder
-
Returns the Display Tool End Projection
License requirements: None.
- distortion - Variable in class nxopen.uf.UFModl.GflangeOptionsData
-
- distortionConstraint - Variable in class nxopen.uf.UFSmd.FpPrefs
-
- distortionMap() - Method in interface nxopen.FlatteningBuilder
-
- distortionMapOptions() - Method in interface nxopen.features.FlatteningAndFormingBuilder
-
Returns the option to display the distortion map on the source faces.
- distortionMapOptions() - Method in interface nxopen.features.FlatteningAndFormingBuilderEx
-
Returns the option to display the distortion map on the source faces.
- DISTRIBUTE_HEIGHT - Static variable in class nxopen.mfg.am.Nester3D.Solution
-
- DistributeAnnotationsBuilder - Interface in nxopen.drafting
-
This class is used to distribute annotations associated to a view.
- DISTRIBUTED_LOAD - Static variable in class nxopen.cae.responsesimulation.Excitation.Component
-
- DISTRIBUTED_LOAD - Static variable in class nxopen.cae.responsesimulation.ExcitationBuilder.ExcitationLocationType
-
- DISTRIBUTED_MASS_PER_AREA - Static variable in class nxopen.cae.Result.Quantity
-
- DISTRIBUTED_MASS_PER_LENGTH - Static variable in class nxopen.cae.Result.Quantity
-
- distributedContact() - Method in interface nxopen.motion.TirePropertyAdvancedParameters
-
Returns the distributed contact
License requirements: mechanisms ("MECHANISMS")
.
- distributedContact() - Method in interface nxopen.motion.TirePropertyNonInertialBuilder
-
Returns the distributed contact.
- DistributedLoadExcitation - Interface in nxopen.cae.responsesimulation
-
- DistributedLoadExcitationBuilder - Interface in nxopen.cae.responsesimulation
-
- distributeExcessLight - Variable in class nxopen.uf.UFDisp.ShadeOptions
-
- distributeType - Variable in class nxopen.optimization.DesignStudyBuilder.DesignStudyVariable
-
Distribute type
- distributeWelds(NXObject) - Method in interface nxopen.features.shipdesign.ManufacturingAssemblyNavigatorBuilder
-
Move the weld components to the lowest common parent of the
2 welded parts
License requirements: nx_ship_mfg_prep ("Ship Manufacturing")
.
- distribution() - Method in interface nxopen.tooling.ReusePositioningObjectBuilder
-
Returns the distribution mode of pattern point
License requirements: None.
- distTol() - Method in interface nxopen.features.WrapGeometryBuilder
-
Returns the Distance tolerance used to facet the solids.
- distTol - Variable in class nxopen.uf.UFCurve.OcfData
-
- distTol - Variable in class nxopen.uf.UFModl.StycornerData
-
- distTol - Variable in class nxopen.uf.UFModl.WrapAssem
-
- distTol - Variable in class nxopen.uf.UFModl.WrapGeom
-
- distTol - Variable in class nxopen.uf.UFModlFeatures.AskTaperFromEdgesData
-
- distTolerance() - Method in interface nxopen.cae.MMCCreateBuilder
-
Returns the dist tolerance
License requirements: None.
- distTolerance() - Method in interface nxopen.weld.FilletBuilder
-
Returns the distance tolerance.
- distValueDisplayFlag() - Method in interface nxopen.cae.SimBCDisplay
-
Returns the true/false flag based on whether the distributed value of the BC is
displayed in the graphics window
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- DIVIDE - Static variable in class nxopen.cae.AfuMathOperation.MultiType
-
Divides AFU records
- DIVIDE - Static variable in class nxopen.cam.RoughTurningBuilder.PartOffDepthModeTypes
-
Part Off Depth Mode: Divide
- Divide - Interface in nxopen.features.shipdesign
-
Represents divide feature(s)
To create or edit an instance of this class, use
DivideBuilder
Created in NX11.0.0
- DIVIDE - Static variable in class nxopen.features.TrimCurve2Builder.Operation
-
- DivideBuilder - Interface in nxopen.features.shipdesign
-
Represents a
Divide
builder which is used to edit
all divide features.
- DivideCurveBuilder - Interface in nxopen.features
-
Represents a builder for non-associative divide curve operation.
- DivideCurveBuilder.CornerOption - Class in nxopen.features
-
Represents the Divide Curve at Corner option types
- DivideCurveBuilder.EqualSegmentOption - Class in nxopen.features
-
Represents the Divide Curve equal segment method types
- DivideCurveBuilder.InputArcLengthDirectionFlag - Class in nxopen.features
-
Represents the Divide Curve Input Arc length direction flag
- DivideCurveBuilder.KnotPointOption - Class in nxopen.features
-
Represents the Divide Curve at Knot option types
- DivideCurveBuilder.Types - Class in nxopen.features
-
Represents the Divide Curve types
- DIVIDED_CIRCLE - Static variable in class nxopen.annotations.IdSymbolBuilder.SymbolTypes
-
Divided circle
- DIVIDED_CIRCLE - Static variable in class nxopen.annotations.PartsListBuilder.PartsListSymbolType
-
- DIVIDED_HEXAGON - Static variable in class nxopen.annotations.IdSymbolBuilder.SymbolTypes
-
Divided hexagon
- DIVIDED_HEXAGON - Static variable in class nxopen.annotations.PartsListBuilder.PartsListSymbolType
-
- DIVIDED_SQUARE - Static variable in class nxopen.annotations.IdSymbolBuilder.SymbolTypes
-
Divided square
- DIVIDED_SQUARE - Static variable in class nxopen.annotations.PartsListBuilder.PartsListSymbolType
-
- Divideface - Interface in nxopen.features
-
Represents a Divideface feature.
- DividefaceBuilder - Interface in nxopen.features
-
Represents a divide face builder.
- DivideFacetFaceBuilder - Interface in nxopen.facet
-
- DivideFacetFaceBuilder.DivideFacetTypes - Class in nxopen.facet
-
Divide Facet Face type
- dividePlane() - Method in interface nxopen.cam.SplitSubopCommand
-
Returns the divide plane
License requirements: None.
- divideSurface() - Method in interface nxopen.features.SnipSurfaceBuilder
-
Returns a value indicating whether to divide the surface
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- divideToolPaths(CAMObject[], ToolPathDivideBuilder) - Method in interface nxopen.cam.CAMSetup
-
Tool Path Divide
License requirements: cam_base ("CAM BASE")
.
- divideType() - Method in interface nxopen.cam.ToolPathDivideBuilder
-
Returns the divide limit type
License requirements: None.
- dividingCurve() - Method in interface nxopen.features.DivideCurveBuilder
-
Returns the select dividing curve
License requirements: None.
- dividingCurves() - Method in interface nxopen.features.PatchOpeningsBuilder
-
Returns the curves used to divide the opening.
- dividingObjectsList() - Method in interface nxopen.features.DividefaceBuilder
-
- dividingObjectsList() - Method in interface nxopen.geometricutilities.SelectDividingObjectBuilder
-
Returns the dividing objects list
License requirements: None.
- division() - Method in interface nxopen.annotations.EnterpriseIdentificationBuilder
-
Returns the division
License requirements: None.
- Division - Interface in nxopen.routing
-
Represents
Division
Creator not available in KF because transient objects are not supported.
- Division.SplitDirectionType - Class in nxopen.routing
-
The direction in which the cross-section is to be split
- divisions() - Method in interface nxopen.die.SpringbackCompensationBuilder
-
Returns the number of equi-distant points to divide the cube of the sheet body (N x N x N).
- divisions() - Method in interface nxopen.features.MoveObjectBuilder
-
Returns the distance or angle divisions
License requirements: None.
- DivisionsBuilder - Interface in nxopen.routing
-
Represents a
DivisionsBuilder
Builder for creating/editing splits at an end of a duct.
- DivisionsBuilder.SplitDirectionType - Class in nxopen.routing
-
The direction in which the cross-section is to be split
- divisionsList() - Method in interface nxopen.routing.SplitDuctBuilder
-
Returns the divisions list
License requirements: routing_hvac ("Routing HVAC")
.
- divObjects() - Method in interface nxopen.tooling.FaceSplitBuilder
-
Returns the dividing objects which will be different according to the split type
License requirements: None.
- dlength - Variable in class nxopen.mfg.am.BuildTray.DimensionsData
-
- DmAmBuilder - Interface in nxopen.cam
-
Represents a Area Milling Drive Method Builder .
- DmAmBuilder.AmCustomStartTypes - Class in nxopen.cam
-
Available types for in FASurfaceContour
- DmAmBuilder.AmCutPatternTypes - Class in nxopen.cam
-
Available types for Area Milling cut pattern in FASurfaceContour
- DmAmBuilder.AmCutTraversalTypes - Class in nxopen.cam
-
Available types for Area Milling cut traversal in FASurfaceContour
- DmAmBuilder.AmPocketDirTypes - Class in nxopen.cam
-
Available types for Area Milling Pocketing Direction in FASurfaceContour
- DmAmBuilder.AutoPatCenterTypes - Class in nxopen.cam
-
Available types for area milling Auto Pattern Center
- DmAmBuilder.OrderRegionsOptTypes - Class in nxopen.cam
-
Available type for area milling Order Regions Option
- DmAmBuilder.SteepOptTypes - Class in nxopen.cam
-
Available types for area milling Steep Option
- DmAmBuilder.SteepOverlapOptTypes - Class in nxopen.cam
-
Available types for area milling Steep Overlap Option
- dmAmRegionCon() - Method in interface nxopen.cam.DmAmBuilder
-
Returns the Region Connection
License requirements: None.
- dmareaMillingBuilder() - Method in interface nxopen.cam.SurfaceContourBuilder
-
Returns the Area Milling Drive Method builder
License requirements: None.
- dMaxValue - Variable in class nxopen.linedesigner.FactoryCadGeoEquipmentAssemblyBuilder.UpdatedControlData
-
- dMaxValue - Variable in class nxopen.linedesigner.FactoryCadGeoEquipmentBuilder.UpdatedControlData
-
- DmBndBuilder - Interface in nxopen.cam
-
Represents a Boundary Drive Method Builder .
- DmBndBuilder.ApplyFilletAtTypes - Class in nxopen.cam
-
Available types for boundary Corner Control Option
- DmBndBuilder.BndCustomStartTypes - Class in nxopen.cam
-
Available types for in FASurfaceContour
- DmBndBuilder.BndCutPatternTypes - Class in nxopen.cam
-
Available types for Boundary cut pattern in FASurfaceContour
- DmBndBuilder.BndCutTraversalTypes - Class in nxopen.cam
-
Available types for Boundary cut traversal in FASurfaceContour
- DmBndBuilder.BndPatternCenterTypes - Class in nxopen.cam
-
Available types for Boundary Pattern Center in FASurfaceContour
- DmBndBuilder.BndPocketDirTypes - Class in nxopen.cam
-
Available types for Boundary Pocketing Direction in FASurfaceContour
- DmBndBuilder.UsePartTypes - Class in nxopen.cam
-
Available types for boundary use part cantainment Option
- dmBndStock() - Method in interface nxopen.cam.DmBndBuilder
-
Returns the Boundary Stock
License requirements: None.
- dmboundaryBuilder() - Method in interface nxopen.cam.SurfaceContourBuilder
-
Returns the Boundary Drive Method builder
License requirements: None.
- DmCmBuilder - Interface in nxopen.cam
-
Represents a DmCmBuilder .
- dmCmBuilder() - Method in interface nxopen.cam.SurfaceContourBuilder
-
Returns the Contour Profile Drive Method builder
License requirements: None.
- DmCmBuilder.ContactPositionRingHeightType - Class in nxopen.cam
-
Available types for contact position ring height
- DmCmBuilder.DmCmCutPointType - Class in nxopen.cam
-
Available types for point type, Contour Milling Drive
- DmCmBuilder.ExtDisType - Class in nxopen.cam
-
Available types for ext_dis, Contour Milling Drive: Start of Cut
- DmCmBuilder.ToolAxisGuideVectorType - Class in nxopen.cam
-
Available types for vector type, Contour Milling Drive
- dmCmEndCutDisType() - Method in interface nxopen.cam.DmCmBuilder
-
- dmCmEndCutExtend() - Method in interface nxopen.cam.DmCmBuilder
-
- dmCmEndCutRadio() - Method in interface nxopen.cam.DmCmBuilder
-
Returns the custom/auto, Contour Milling Drive: End of Cut
License requirements: None.
- dmCmEndCutToolAxisGuideVector() - Method in interface nxopen.cam.DmCmBuilder
-
Returns the end tool side vector, Contour Milling Drive: End of Cut
License requirements: None.
- dmCmFloorWallStockFloorBuilder() - Method in interface nxopen.cam.DmCmBuilder
-
Returns the Floor Stock builder (inheritable double)
License requirements: cam_base ("CAM BASE")
.
- dmCmFloorWallStockSame() - Method in interface nxopen.cam.DmCmBuilder
-
Returns the Contour Profile Drive: Floor Stock / Wall Stock
License requirements: None.
- dmCmFloorWallStockWallBuilder() - Method in interface nxopen.cam.DmCmBuilder
-
Returns the Wall Stock builder (inheritable double)
License requirements: None.
- dmCmMultiplePassesBuilder() - Method in interface nxopen.cam.DmCmBuilder
-
Returns the Multiple Passes builder
License requirements: None.
- DmCmMultiplePassesCiBuilder - Interface in nxopen.cam
-
- DmCmMultiplePassesCiBuilder.OrderType - Class in nxopen.cam
-
Available types for Order
- DmCmMultiplePassesCiBuilder.WallStepMethodType - Class in nxopen.cam
-
Available types for Wall Step Method
- dmCmStartCutDisType() - Method in interface nxopen.cam.DmCmBuilder
-
- dmCmStartCutExtend() - Method in interface nxopen.cam.DmCmBuilder
-
- dmCmStartCutRadio() - Method in interface nxopen.cam.DmCmBuilder
-
Returns the custom/auto, Contour Milling Drive: Start of Cut
License requirements: None.
- dmCmStartCutToolAxisGuideVector() - Method in interface nxopen.cam.DmCmBuilder
-
Returns the start tool side vector, Contour Milling Drive: Start of Cut
License requirements: None.
- DmCurveBuilder - Interface in nxopen.cam
-
Represents a Curve Drive Method Builder .
- dmcurveBuilder() - Method in interface nxopen.cam.SurfaceContourBuilder
-
Returns the Curve Drive Method builder
License requirements: None.
- DmCurveBuilder.DpmcvStepTypes - Class in nxopen.cam
-
Available types for Cure Drive Cut Step
- DME - Static variable in class nxopen.tooling.DieBaseBuilder.CatalogOpt
-
catalog for DME
- dMinValue - Variable in class nxopen.linedesigner.FactoryCadGeoEquipmentAssemblyBuilder.UpdatedControlData
-
- dMinValue - Variable in class nxopen.linedesigner.FactoryCadGeoEquipmentBuilder.UpdatedControlData
-
- dmisFile() - Method in interface nxopen.cam.InspectionImportDmisBuilder
-
Returns the dmis file
License requirements: None.
- DML - Static variable in class nxopen.cam.InspectionMeasDataBuilder.InputFormatType
-
Dimensional Markup Language
- dmlExtension() - Method in interface nxopen.cam.InspectionAnalyzeOutputBuilder
-
Returns the extension to use for dml format files
License requirements: None.
- dmlPcs() - Method in interface nxopen.cam.InspectionAnalyzeOutputBuilder
-
Returns the PCS to use for DML output
License requirements: None.
- DmRadBuilder - Interface in nxopen.cam
-
Represents a DmRadBuilder Builder .
- dmradBuilder() - Method in interface nxopen.cam.SurfaceContourBuilder
-
Returns the Radial Cut Drive Method builder
License requirements: None.
- DmRadBuilder.RadCutMethodType - Class in nxopen.cam
-
Available types for Radial Cut/Cut Method in scop
- DmRadBuilder.RadStepoverTypeType - Class in nxopen.cam
-
Available types for Stepover for the Radial Cut in scop.
- DmRadBuilder.RadTraverseDirType - Class in nxopen.cam
-
Available types for Radial Cut/ Traverse Direction
- DmRotaryFloorFinishBuilder - Interface in nxopen.cam
-
represent rotary floor finish builder .
- DmRotaryFloorFinishBuilder.CutDirection - Class in nxopen.cam
-
the types for start cut direction
- DmRotaryFloorFinishBuilder.CutDirType - Class in nxopen.cam
-
the types for cut direction
- DmRotaryFloorFinishBuilder.DirectionType - Class in nxopen.cam
-
the types for direction
- DmRotaryFloorFinishBuilder.DmSurfCutAreaType - Class in nxopen.cam
-
the types for cut area
- DmRotaryFloorFinishBuilder.DmSurfCutStepTypes - Class in nxopen.cam
-
the types for Cut Step
- DmRotaryFloorFinishBuilder.GougeActionTypes - Class in nxopen.cam
-
the gouge action types for Rotary Floor Finish method/Gouge Check in scop
- DmRotaryFloorFinishBuilder.MatSideType - Class in nxopen.cam
-
the types for flip material
- DmSpiralBuilder - Interface in nxopen.cam
-
Represents a Spiral Drive Method Builder
This is an abstract class and cannot be instantiated.
- dmSpiralBuilder() - Method in interface nxopen.cam.SurfaceContourBuilder
-
Returns the Spiral Drive Method builder
License requirements: None.
- DmSpiralBuilder.DmSpiralStepoverTypes - Class in nxopen.cam
-
Available types for Spiral drive method stepover in SurfaceContour.
- dmSpiralStepoverMenu() - Method in interface nxopen.cam.DmSpiralBuilder
-
Returns the Spiral Drive Method Stepover type.
- DmStreamlineCutStep - Interface in nxopen.cam
-
Represents a streamline cut step builder
This object is a sub-object and cannot be instantiated.
- DmSurfBuilder - Interface in nxopen.cam
-
Represents a DmSurfBuilder .
- dmSurfBuilder() - Method in interface nxopen.cam.SurfaceContourBuilder
-
Returns the Surface Area Drive Method builder
License requirements: None.
- DmSurfBuilder.CutDirection - Class in nxopen.cam
-
Available types for Cut Direction
- DmSurfBuilder.DmSurfCutAreaType - Class in nxopen.cam
-
Available types for SDM: Cut Area
- DmSurfBuilder.DmSurfCutPatternType - Class in nxopen.cam
-
SDM: Cut Method in scop, cut pattern
- DmSurfBuilder.DmSurfCutStepType - Class in nxopen.cam
-
Available types for SDM: Cut Step
- DmSurfBuilder.DmSurfCutTraversalType - Class in nxopen.cam
-
SDM: Cut Method in scop, cut traversal
- DmSurfBuilder.GougeActionType - Class in nxopen.cam
-
Surface Drive method/Gouge Check in scop
- DmSurfBuilder.MatSideType - Class in nxopen.cam
-
Available types for Flip Material, SDM: Select Cut Direction
- DmSurfBuilder.ToolPositionType - Class in nxopen.cam
-
Available types for SDM: Tool Position Type
- dmSurfCutArea() - Method in interface nxopen.cam.DmRotaryFloorFinishBuilder
-
Returns the cut area
License requirements: None.
- dmSurfCutArea() - Method in interface nxopen.cam.DmSurfBuilder
-
Returns the SDM: Cut Arear
License requirements: None.
- dmSurfCutPattern() - Method in interface nxopen.cam.DmSurfBuilder
-
Returns the Pattern SDM: Cut Method
License requirements: None.
- dmSurfCutStep() - Method in interface nxopen.cam.DmRotaryFloorFinishBuilder
-
Returns the cut step
License requirements: None.
- dmSurfCutStep() - Method in interface nxopen.cam.DmSurfBuilder
-
Returns the SDM: Cut Step
License requirements: None.
- dmSurfCutStepFirstCut() - Method in interface nxopen.cam.DmRotaryFloorFinishBuilder
-
Returns the first cut of cut step
License requirements: None.
- dmSurfCutStepFirstCut() - Method in interface nxopen.cam.DmSurfBuilder
-
Returns the First Cut, SDM: Cut Step
License requirements: None.
- dmSurfCutStepSecondCut() - Method in interface nxopen.cam.DmRotaryFloorFinishBuilder
-
Returns the second cut of cut step
License requirements: None.
- dmSurfCutStepSecondCut() - Method in interface nxopen.cam.DmSurfBuilder
-
Returns the Second Cut, SDM: Cut Step
License requirements: None.
- dmSurfCutStepThirdCut() - Method in interface nxopen.cam.DmRotaryFloorFinishBuilder
-
Returns the third cut of cut step
License requirements: None.
- dmSurfCutStepThirdCut() - Method in interface nxopen.cam.DmSurfBuilder
-
Returns the Third Cut, SDM: Cut Step
License requirements: None.
- dmSurfCutTraversal() - Method in interface nxopen.cam.DmSurfBuilder
-
Returns the Cut Type SDM: Cut Method
License requirements: None.
- dmSurfGouge() - Method in interface nxopen.cam.DmRotaryFloorFinishBuilder
-
Returns the gouge action
License requirements: None.
- dmSurfGouge() - Method in interface nxopen.cam.DmSurfBuilder
-
Returns the Surface Drive method/Gouge Check
License requirements: None.
- dmSurfToolPos() - Method in interface nxopen.cam.DmSurfBuilder
-
Returns the SDM: Tool Position
License requirements: None.
- DmToolPosition - Interface in nxopen.cam
-
Represents a streamline tool position builder
This is an abstract class and cannot be instantiated.
- DmToolPosition.ToolPositionOption - Class in nxopen.cam
-
Enum of tool position
- DmTpBuilder - Interface in nxopen.cam
-
Represents a tool path Drive Method Builder
This is an abstract class and cannot be instantiated.
- dmtpBuilder() - Method in interface nxopen.cam.SurfaceContourBuilder
-
Returns the Tool Path Drive Method builder
License requirements: None.
- DmTrimExtend - Interface in nxopen.cam
-
Represents a streamline trim and extend builder
This is an abstract class and cannot be instantiated.
- DMUDebugSession - Interface in nxopen.dmu
-
Represents a class that is used for DMU testing.
- DMUDebugSessionFactory - Class in nxopen.dmu
-
- DMUDebugSessionFactory() - Constructor for class nxopen.dmu.DMUDebugSessionFactory
-
- DMUManager - Interface in nxopen.dmu
-
Represents an object that manages DMU application specific objects and preferences.
- DMUManagerFactory - Class in nxopen.dmu
-
- DMUManagerFactory() - Constructor for class nxopen.dmu.DMUManagerFactory
-
- dmUserExitCi() - Method in interface nxopen.cam.DmUserExitCiBuilder
-
Returns the Project Type
License requirements: None.
- DmUserExitCiBuilder - Interface in nxopen.cam
-
Represents a exit name ci Builder .
- DN - Static variable in class nxopen.features.shipdesign.SectionViewBuilder.DirectionOptions
-
- DO_DELETE - Static variable in class nxopen.routing.DesignRuleViolationLocationCollection.DeleteOption
-
- DO_NOT_CHECK - Static variable in class nxopen.cae.SimSolution.SetupCheckOption
-
do perform any set up checks
- DO_NOT_DISPLAY - Static variable in class nxopen.validate.ValidatorOptions.ResultsDisplayModeTypes
-
Do not display results
- DO_NOT_EXTEND_AND_EXTEND_TRIM_FACE - Static variable in class nxopen.uf.UFModl.SweepTrimOpts
-
- DO_NOT_EXTEND_TRIM_FACE - Static variable in class nxopen.uf.UFModl.SweepTrimOpts
-
- DO_NOT_NOTIFY - Static variable in class nxopen.preferences.PartDrafting.UpdateViewWithoutLwDataOption
-
Do Not Notify
- DO_NOT_REPORT - Static variable in class nxopen.routing.ReuseLibrary.ReportInBom
-
Do not report in the Bill of Materials
- DO_NOT_SAVE - Static variable in class nxopen.validate.RequirementCheck.SaveResultsToTeamcenterOptions
-
Do not perform save.
- DO_NOT_SAVE - Static variable in class nxopen.validate.ValidatorOptions.SaveModeTypes
-
Do not perform save.
- DO_NOT_TRIM - Static variable in class nxopen.annotations.TrimDimensionLineStyle
-
Dimension line will not be trimmed when text crosses both extension lines
- DO_NOT_TRIM_BLEND_FACES - Static variable in class nxopen.features.AestheticFaceBlendBuilder.BlendFacesType
-
This option controls to trim blend faces or not
- doAppendMerge() - Method in interface nxopen.cae.SolverAppendOption
-
- doAssemblyConstraintsUpdate(int) - Method in interface nxopen.Update
-
Performs an assembly constraints update.
- doAssemblyConstraintsUpdateInPart(Part, int) - Method in interface nxopen.Update
-
Performs an assembly constraints update.
- doAutomaticGeomMatch() - Method in interface nxopen.features.ReplaceFeatureBuilder
-
Returns the indication on whether to perform automatic geometric matching or not.
- doAveraging - Variable in class nxopen.cae.Result.Averaging
-
- doCheck() - Method in interface nxopen.cae.modelcheck.ElementEdgeCheckBuilder
-
- doCheck() - Method in interface nxopen.cae.modelcheck.ElementMaterialOrientationCheckBuilder
-
Calculates material orientation vector for input elements and returns the orientation vector result
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- doCheck() - Method in interface nxopen.cae.modelcheck.FaceClearanceCheckBuilder
-
Perform the clearance check.
- doCheck() - Method in interface nxopen.cae.modelcheck.ModelSetupCheckBuilder
-
Performs model setup check
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- DoCheckData() - Constructor for class nxopen.cae.modelcheck.ElementEdgeCheckBuilder.DoCheckData
-
- DoCheckData() - Constructor for class nxopen.cae.modelcheck.ElementMaterialOrientationCheckBuilder.DoCheckData
-
- DOCKED - Static variable in class nxopen.cae.xyplot.LegendTablePositionType
-
The position of legend table is fixed
- doCleanup() - Method in interface nxopen.PartCleanup
-
Actually performs the part cleanup operation according to the
properties set on this object
License requirements: None.
- doClearanceAnalysis(Tag) - Method in interface nxopen.uf.UFClear
-
- doCollisionAvoidance() - Method in interface nxopen.cam.InspectionCollisionAvoidanceBuilder
-
Updates selected paths.
- doCoplanarDecimation() - Method in interface nxopen.cae.FluidDomainBuilder
-
Returns the decimation flag - obsolete: always using surface wrapper default values
License requirements: None.
- DOCUMENT - Static variable in class nxopen.ame.AmeDebugSession.NavigatorType
-
Document Navigator
- DOCUMENT_STRUCTURE_NODE - Static variable in class nxopen.ame.OrderAspectsBuilder.OrderType
-
- Documentation - Interface in nxopen.cam
-
Represents a Documentation operation
To create or edit an instance of this class, use
DocumentationBuilder
Created in NX9.0.3
- DocumentationBuilder - Interface in nxopen.cam
-
- DocumentData - Interface in nxopen.openxml
-
Represents the definition of the base document data .
- DocumentData.Type - Class in nxopen.openxml
-
the document data type
- DocumentDataGroup - Interface in nxopen.openxml
-
Contains methods for adding document data for CAE Report.
- DocumentRoot - Interface in nxopen.ame
-
Document Root Node class
This object does not need a creator.
- DocumentStructure - Interface in nxopen.ame.db
-
Class to define Document Structure object
This object does not need a creator.
- DocumentStructure.Attribute - Class in nxopen.ame.db
-
Represents the attribute for Document Structure
- DocumentStructureBuilder - Interface in nxopen.ame
-
- DocumentType - Class in nxopen.ame
-
Represents the type of document
- doDelete() - Method in interface nxopen.ame.AMEManager
-
Start to delete
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- doDeleteWithUpdate() - Method in interface nxopen.ame.AMEManager
-
Start to delete with update
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- doDepthPasses() - Method in interface nxopen.cam.MultiplePassesBuilder
-
Returns the Do Depth Passes
License requirements: cam_base ("CAM BASE")
.
- doElementValue - Variable in class nxopen.cae.Result.ElementValue
-
- DOES_NOT_CONTAIN_OPERATOR - Static variable in class nxopen.visualreporting.Condition.OperatorOption
-
- doesFontExist(int) - Method in interface nxopen.FontCollection
-
Finds out whether the specified ID is associated with a font
License requirements: None.
- doesMethodNameAlreadyExist(String) - Method in interface nxopen.ame.PlcMethodBuilder
-
To find out that the given for method name already exist or not
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- doesObjectHaveAttributes(NXObject) - Method in interface nxopen.weld.CharacteristicsBuilder
-
Copy the attributes that are on the object to the selection and returns a flag indicating whether the object actually has attributes.
- doesUndoMarkExist(int, String) - Method in interface nxopen.Session
-
Returns true if the specified mark exists
License requirements: None.
- doExportMeshToSolver() - Method in interface nxopen.cae.FluidDomainBuilder
-
Returns the export mesh to solver flag.
- Dof - Class in nxopen.cae.connections
-
Degrees of freedom definition
- dof1() - Method in interface nxopen.cae.connections.ConnectionData
-
Returns the dof1
License requirements: None.
- dof1 - Variable in class nxopen.cae.optimization.TBSCheckDOF.DofSettings
-
Represents displacement in the X axial direction
- DOF1 - Static variable in class nxopen.cae.responsesimulation.VelocityImpactDirection.NodalComponentType
-
- dof2() - Method in interface nxopen.cae.connections.ConnectionData
-
Returns the dof2
License requirements: None.
- dof2 - Variable in class nxopen.cae.optimization.TBSCheckDOF.DofSettings
-
Represents displacement in the Y axial direction
- DOF2 - Static variable in class nxopen.cae.responsesimulation.VelocityImpactDirection.NodalComponentType
-
- dof3() - Method in interface nxopen.cae.connections.ConnectionData
-
Returns the dof3
License requirements: None.
- dof3 - Variable in class nxopen.cae.optimization.TBSCheckDOF.DofSettings
-
Represents displacement in the Z axial direction
- DOF3 - Static variable in class nxopen.cae.responsesimulation.VelocityImpactDirection.NodalComponentType
-
- dof4() - Method in interface nxopen.cae.connections.ConnectionData
-
Returns the dof4
License requirements: None.
- dof5() - Method in interface nxopen.cae.connections.ConnectionData
-
Returns the dof5
License requirements: None.
- dof6() - Method in interface nxopen.cae.connections.ConnectionData
-
Returns the dof6
License requirements: None.
- dofcolor() - Method in interface nxopen.preferences.PartSketch
-
Returns the sketch degree of freedom arrow color
License requirements: None.
- DofCombination - Class in nxopen.cae.connections
-
Degrees Of Freedom Combination types
- dofCombination() - Method in interface nxopen.cae.connections.IDofCombination
-
Returns the degrees of freedom combination type
License requirements: None.
- dofComponent - Variable in class nxopen.cae.DofTerm
-
Degree of Freedom Component.
- dofCsysMode() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
Returns the Degree of Freedom Coordinate System Mode
License requirements: None.
- dofdataterms - Variable in class nxopen.cae.ElementAssociatedDataUtils.AskInterpolationData
-
Term of dof in the interpolation element.
- dofdisplay() - Method in interface nxopen.Sketch
-
Returns a flag indicating whether the degree of freedom arrows are currently being
displayed
License requirements: None.
- dofDisplayFlag() - Method in interface nxopen.cae.SimBCDisplay
-
Returns the true/false flag based on whether the dof of the BC is
displayed in the graphics window
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- doFitOnHideOrShow() - Method in interface nxopen.preferences.SessionVisualizationScreen
-
Returns the option to specify whether a Fit should be done when a Hide or Show is performed.
- dofNeeded - Variable in class nxopen.Sketch.StatusData
-
The number of degrees of freedom left in the sketch
- dofNeeded - Variable in class nxopen.uf.UFSket.AskSketchStatusData
-
- DOFS - Static variable in class nxopen.cae.connections.ModelizationResultType
-
Dofs
- dofs - Variable in class nxopen.cae.ElementAssociatedDataUtils.AskRigidData
-
The 6 dofs of the rigid element.
- dofs() - Method in interface nxopen.cae.optimization.TBSCheckDOF
-
Returns the displacement restriction settings on referenced coordinate system
License requirements: None.
- dofSets() - Method in interface nxopen.cae.PreTestExciterSelectionControl
-
The candidate and required DOFs .
- dofSets() - Method in interface nxopen.cae.PreTestSensorSelectionControl
-
The candidate and required DOFs .
- dofSetSelect() - Method in interface nxopen.cae.PreTestDofSetBuilder
-
Returns the referrenced
CaeDOFSet
License requirements: nx_correl_base ("FE Correlation")
Created in NX7.5.0
- DofSettings() - Constructor for class nxopen.cae.optimization.TBSCheckDOF.DofSettings
-
- DofSettings(TBSCheckDOF.CheckDofOption, TBSCheckDOF.CheckDofOption, TBSCheckDOF.CheckDofOption) - Constructor for class nxopen.cae.optimization.TBSCheckDOF.DofSettings
-
Constructor for the DofSettings object.
- dofSettings() - Method in interface nxopen.cae.optimization.TBSShapeRestrictAreaBuilder
-
Returns the DOF settings
License requirements: None.
- dofsState() - Method in interface nxopen.cae.RigidEADBuilder
-
Returns the dofs state drives the action upon commit
License requirements: nx_masterfem ("Finite Element Modeling")
.
- DofTerm - Class in nxopen.cae
-
Used to specify a term of the Degree of freedom.
- DofTerm() - Constructor for class nxopen.cae.DofTerm
-
- DofTerm(int, int, double) - Constructor for class nxopen.cae.DofTerm
-
Constructor for the DofTerm object.
- DofType - Class in nxopen.cae.connections
-
Degrees Of Freedom types
- doglegAngle() - Method in interface nxopen.annotations.OrdinateDimensionPreferences
-
Returns the dogleg angle
License requirements: None.
- doglegAngle() - Method in interface nxopen.annotations.OrdinateStyleBuilder
-
Returns the dogleg angle.
- doglegAngle - Variable in class nxopen.uf.UFDrf.DoglegInfo
-
- doglegCreationOption() - Method in interface nxopen.annotations.OrdinateDimensionPreferences
-
Returns the dogleg creation option
License requirements: None.
- doglegCreationOption() - Method in interface nxopen.annotations.OrdinateStyleBuilder
-
Returns the dogleg creation option
License requirements: None.
- doglegDefinition() - Method in interface nxopen.annotations.OrdinateDimensionPreferences
-
Returns the dogleg definition
License requirements: None.
- doglegDistance - Variable in class nxopen.uf.UFDrf.DoglegInfo
-
- doglegEndOffset() - Method in interface nxopen.annotations.OrdinateDimensionPreferences
-
Returns the dogleg end offset
License requirements: None.
- doglegEndOffset() - Method in interface nxopen.annotations.OrdinateStyleBuilder
-
Returns the dogleg end offset.
- DoglegInfo() - Constructor for class nxopen.uf.UFDrf.DoglegInfo
-
- DoglegInfo(UFDrf.DoglegType, double, double) - Constructor for class nxopen.uf.UFDrf.DoglegInfo
-
- doglegOption - Variable in class nxopen.annotations.OrdinateDimension.DoglegPreferences
-
- DoglegPreferences() - Constructor for class nxopen.annotations.OrdinateDimension.DoglegPreferences
-
- DoglegPreferences(OrdinateDoglegDefinition, double, double, double, OrdinateDoglegCreationOption) - Constructor for class nxopen.annotations.OrdinateDimension.DoglegPreferences
-
Constructor for the DoglegPreferences object.
- doglegSetting - Variable in class nxopen.annotations.OrdinateDimension.DoglegPreferences
-
- doglegSetting() - Method in interface nxopen.annotations.OrdinateStyleBuilder
-
Returns the dogleg setting.
- doglegStartOffset() - Method in interface nxopen.annotations.OrdinateDimensionPreferences
-
Returns the dogleg start offset
License requirements: None.
- doglegStartOffset() - Method in interface nxopen.annotations.OrdinateStyleBuilder
-
Returns the dogleg start offset.
- doglegType - Variable in class nxopen.uf.UFDrf.DoglegInfo
-
- doInterpartUpdate(int) - Method in interface nxopen.Update
-
Performs an interpart update.
- doKfUpdate(int) - Method in interface nxopen.RuleManager
-
Performs an KF update.
- DOLLOP - Static variable in class nxopen.uf.UFConstants
-
- DOLLOP - Static variable in class nxopen.weld.PointMarkBuilder.WeldTypes
-
Dollop
- DOLLOP - Static variable in class nxopen.weld.WeldAdvisorCustomerDefault
-
Dollop
- DOLLOP - Static variable in class nxopen.weld.WeldFeatureSetType
-
Dollop
- DOLLOP_FEATURE - Static variable in class nxopen.uf.UFConstants
-
- DOLLOP_FEATURE - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
-
- DOLLOP_NA_TYPE - Static variable in class nxopen.uf.UFWeld.Types
-
- DOLLOP_NON_ASSOCIATIVE - Static variable in class nxopen.uf.UFConstants
-
- DOLLOP_TYPE - Static variable in class nxopen.uf.UFWeld.Types
-
- DOLLOP_WELD - Static variable in class nxopen.uf.UFConstants
-
- DOLLOP_WELD_NON_ASSOCIATIVE - Static variable in class nxopen.uf.UFConstants
-
- domains() - Method in interface nxopen.fields.FieldManager
-
Returns a collection of Domains .
- DOME - Static variable in class nxopen.display.Background.CategoryType
-
3D Dome
- domeImage() - Method in interface nxopen.display.Background
-
Returns the dome background's image builder
License requirements: None.
- domeImageFilename() - Method in interface nxopen.display.Background
-
Returns the background's dome image filename
License requirements: None.
- domeOrigin() - Method in interface nxopen.display.Background
-
Returns the origin
License requirements: None.
- domeSize() - Method in interface nxopen.display.Background
-
Returns the dome size
License requirements: None.
- domeType() - Method in interface nxopen.display.Background
-
Returns the dome type
License requirements: None.
- DONT_ALLOW_SAVE - Static variable in class nxopen.features.PartModule.PartLoadOption
-
Sets the loaded part as read only.
- DONT_CLOSE_MODIFIED - Static variable in class nxopen.BasePart.CloseModified
-
Do not close any modified parts
- DONT_COPY_ANNOTATION - Static variable in class nxopen.drawings.DraftingViewCollection.ViewCopyAnnotOption
-
don't copy annotation
- DONT_CREATE - Static variable in class nxopen.cae.SolverAppendOption.SolutionOption
-
- DONT_DELETE - Static variable in class nxopen.routing.DesignRuleViolationLocationCollection.DeleteOption
-
Set this option only if you do not want to delete violation location objects
- DONT_IMPORT - Static variable in class nxopen.LoadOptions.BookmarkRefsets
-
Do nothing with the bookmark reference set data
- DONT_OVERRIDE - Static variable in class nxopen.ame.ImportEclassMappingMode
-
- DONT_REPLACE - Static variable in class nxopen.ExpressionCollection.ImportMode
-
Don't overwrite existing expressions.
- DONT_SEARCH - Static variable in class nxopen.routing.ControlPointCollection.CheckExisting
-
Don't search for an exising object,
always create a new object.
- DONT_SHARE - Static variable in class nxopen.preferences.SessionModeling.ShareGeometriesOnSaveType
-
- DONT_TRIM_DIM_LINE - Static variable in class nxopen.uf.UFDrf.TrimDimLineStyle
-
- DONT_UPDATE - Static variable in class nxopen.SmartObject.UpdateOption
-
No update occurs.
- DONT_UPDATE - Static variable in class nxopen.uf.UFSo.UpdateOption
-
- DONTCREATETHECONNECTION - Static variable in class nxopen.linedesigner.TypedConnectorFeatureBuilder.BehaviorOnMismatch
-
- doorOpeningLeft() - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarWizardBuilder
-
Returns the left forward door opening geometry.
- doorOpeningLeft() - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarWizardBuilder
-
Returns the left forward door opening geometry.
- doorOpeningLeft() - Method in interface nxopen.features.vehicledesign.HeadImpactOtherRailWizardBuilder
-
Returns the left forward door opening geometry.
- doorOpeningLeft() - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailWizardBuilder
-
Returns the left forward door opening geometry.
- doorOpeningRight() - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarWizardBuilder
-
Returns the right forward door opening geometry.
- doorOpeningRight() - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarWizardBuilder
-
Returns the right forward door opening geometry.
- doorOpeningRight() - Method in interface nxopen.features.vehicledesign.HeadImpactOtherRailWizardBuilder
-
Returns the right forward door opening geometry.
- doorOpeningRight() - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailWizardBuilder
-
Returns the right forward door opening geometry.
- doorTopLeft() - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder
-
Returns the left Door Top additional geometry.
- doorTopLeft() - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarWizardBuilder
-
Returns the left door opening top point.
- doorTopLeft() - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarDetailBuilder
-
Returns the left Door Top additional geometry.
- doorTopLeft() - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarWizardBuilder
-
Returns the left door opening top point.
- doorTopLeftFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder
-
Returns the left Door Top additional geometry flag.
- doorTopLeftFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarDetailBuilder
-
Returns the left Door Top additional geometry flag.
- doorTopRight() - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder
-
Returns the right Door Top additional geometry.
- doorTopRight() - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarWizardBuilder
-
Returns the right door opening top point.
- doorTopRight() - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarDetailBuilder
-
Returns the right Door Top additional geometry.
- doorTopRight() - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarWizardBuilder
-
Returns the right door opening top point.
- doorTopRightFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder
-
Returns the right Door Top additional geometry flag.
- doorTopRightFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarDetailBuilder
-
Returns the right Door Top additional geometry flag.
- doPaste() - Method in interface nxopen.features.CopyFaceBuilder
-
Returns the do paste option defines whether paste the copied faces to a target body.
- doPaste() - Method in interface nxopen.features.CutFaceBuilder
-
Returns the do paste option defines whether paste the cut faces to a target body.
- doReplace() - Method in interface nxopen.sim.SinumerikCaSimplifyBodiesBuilder
-
Replace the simplify bodies
License requirements: nx_isv_mtb ("Machine Tool Builder") OR nx_sinumerik_ca ("Sinumerik Collision Avoidance")
.
- doSharpFeatureEdge() - Method in interface nxopen.cae.FluidDomainBuilder
-
Returns the edge snapping flag - obsolete: use SnapToSourceBoundaries() instead
License requirements: None.
- doSharpFeaturePlaneIntersection() - Method in interface nxopen.cae.FluidDomainBuilder
-
Returns the plane intersection detection flag - obsolete: use SnapToSourceBoundaries() instead
License requirements: None.
- doSidePasses() - Method in interface nxopen.cam.MultiplePassesBuilder
-
Returns the Do Side Passes
License requirements: None.
- DOT - Static variable in class nxopen.ame.AspectPrefixBuilder.DelimiterType
-
A dot (.) is used as the delimiter
- DOT - Static variable in class nxopen.annotations.LeaderData.ArrowheadType
-
Dot symbol
- DOT - Static variable in class nxopen.cae.MarkerType0d
-
- DOT - Static variable in class nxopen.cae.ModelDisplayBuilder.FreeEdgeMarker
-
Dot marker
- DOT - Static variable in class nxopen.cae.ModelDisplayBuilder.NodeMarkerType
-
Dot
- DOT - Static variable in class nxopen.cae.ModelDisplayBuilder.NodeUnattachedMarkerType
-
Dot
- DOT - Static variable in class nxopen.cae.ModelDisplayBuilder.StitchedEdgeMarker
-
Dot marker
- DOT - Static variable in class nxopen.cae.xyplot.PointMarker
-
Dot marker
- DOT - Static variable in class nxopen.uf.UFDisp.PolyMarker
-
- dot(double[], double[]) - Method in interface nxopen.uf.UFVec2
-
- dot(double[], double[]) - Method in interface nxopen.uf.UFVec3
-
- DOT - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- DOT_ARROW - Static variable in class nxopen.annotations.ArrowheadType
-
- DOT_ARROW - Static variable in class nxopen.uf.UFDrf.ArrowheadAndFillType
-
- DOT_ONE_LINK_DRIVER - Static variable in class nxopen.motion.TextBasedElementBuilder.TypeChoices
-
- DOT_TERMINATED - Static variable in class nxopen.annotations.LeaderData.LeaderType
-
Datum feature on stub of dot terminated style
- DOT_TWO_LINK_DRIVER - Static variable in class nxopen.motion.TextBasedElementBuilder.TypeChoices
-
- dotArrowheadDiameter() - Method in interface nxopen.annotations.LineAndArrowPreferences
-
Returns the dot arrowhead diameter
License requirements: None.
- dotArrowheadDiameter() - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
Returns the dot arrowhead diameter
License requirements: None.
- dotArrowheadDiameter - Variable in class nxopen.uf.UFDrf.LineArrowPreferences
-
- DOTDASH - Static variable in class nxopen.assemblies.ProductOutlineBuilder.LineFont
-
Dotdash Line
- DOTDASH - Static variable in class nxopen.display.GridBuilder.LineStyleType
-
- dotDiameter - Variable in class nxopen.uf.UFGdt.LeaderSpec
-
- doTest() - Method in interface nxopen.cae.modelcheck.ITestValue
-
Returns an option value indicating whether to do element quality check for this test
License requirements: None.
- doTrimWithoutCopy() - Method in interface nxopen.features.shipdesign.SplitProfilePlateBuilder
-
Returns the option to determine if target bodies will be copied.
- dotsPerInch - Variable in class nxopen.preferences.SessionVisualizationHighQualityImage.ResolutionData
-
Dots per inch.
- DOTTED - Static variable in class nxopen.annotations.EditSymbolDisplayBuilder.FontTypes
-
Dotted Type
- DOTTED - Static variable in class nxopen.assemblies.ProductOutlineBuilder.LineFont
-
Dotted Line
- DOTTED - Static variable in class nxopen.cae.ModelDisplayBuilder.FreeEdgeFont
-
Dotted font
- DOTTED - Static variable in class nxopen.cae.ModelDisplayBuilder.RotationAxisLineFont
-
Dotted font
- DOTTED - Static variable in class nxopen.cae.ModelDisplayBuilder.StitchedEdgeFont
-
Dotted font
- DOTTED - Static variable in class nxopen.display.GridBuilder.LineStyleType
-
- DOTTED - Static variable in class nxopen.DisplayableObject.ObjectFont
-
- DOTTED - Static variable in class nxopen.drawings.CustomViewSettingsBuilder.Font
-
Dotted
- DOTTED - Static variable in class nxopen.drawings.DrawingCompareSettingsBuilder.FontType
-
Deprecated.
- DOTTED - Static variable in class nxopen.drawings.SectionLineStyleBuilder.FontStyle
-
Deprecated.
- DOTTED - Static variable in class nxopen.features.vehicledesign.PedestrianProtectionBuilder.Font
-
Dotted Font
- DOTTED - Static variable in class nxopen.fields.DisplayPropertiesBuilder.LineFontEnum
-
Dotted
- DOTTED - Static variable in class nxopen.LineFontBuilder.LineFontType
-
Dotted line font
- DOTTED - Static variable in class nxopen.preferences.Font
-
Dotted
- DOTTED - Static variable in class nxopen.preferences.PartDrafting.FontType
-
Dotted
- DOTTED - Static variable in class nxopen.preferences.PartModeling.GridKnotLineFontType
-
- DOTTED - Static variable in class nxopen.preferences.PartObject.LineFontType
-
Dotted
- DOTTED - Static variable in class nxopen.preferences.SessionModeling.PolylineStyleType
-
- DOTTED - Static variable in class nxopen.preferences.ViewVisualizationVisual.SmoothEdgeFont
-
- DOTTED - Static variable in class nxopen.ViewDependentDisplayManager.Font
-
- DOTTED_DASH - Static variable in class nxopen.drawings.DrawingCompareSettingsBuilder.FontType
-
Deprecated.
- DOTTED_DASHED - Static variable in class nxopen.annotations.EditSymbolDisplayBuilder.FontTypes
-
Dotted Dash
- DOTTED_DASHED - Static variable in class nxopen.cae.ModelDisplayBuilder.FreeEdgeFont
-
Dotted dashed font
- DOTTED_DASHED - Static variable in class nxopen.cae.ModelDisplayBuilder.RotationAxisLineFont
-
Dotted dashed font
- DOTTED_DASHED - Static variable in class nxopen.cae.ModelDisplayBuilder.StitchedEdgeFont
-
Dotted dashed font
- DOTTED_DASHED - Static variable in class nxopen.DisplayableObject.ObjectFont
-
- DOTTED_DASHED - Static variable in class nxopen.drawings.CustomViewSettingsBuilder.Font
-
Dotted Dashed
- DOTTED_DASHED - Static variable in class nxopen.drawings.SectionLineStyleBuilder.FontStyle
-
Deprecated.
- DOTTED_DASHED - Static variable in class nxopen.features.vehicledesign.PedestrianProtectionBuilder.Font
-
DottedDashed Font
- DOTTED_DASHED - Static variable in class nxopen.fields.DisplayPropertiesBuilder.LineFontEnum
-
- DOTTED_DASHED - Static variable in class nxopen.LineFontBuilder.LineFontType
-
Dotted Dashed line font
- DOTTED_DASHED - Static variable in class nxopen.preferences.Font
-
Dotted Dashed
- DOTTED_DASHED - Static variable in class nxopen.preferences.PartDrafting.FontType
-
Dotted Dashed
- DOTTED_DASHED - Static variable in class nxopen.preferences.PartModeling.GridKnotLineFontType
-
- DOTTED_DASHED - Static variable in class nxopen.preferences.PartObject.LineFontType
-
Dotted Dashed
- DOTTED_DASHED - Static variable in class nxopen.preferences.ViewVisualizationVisual.SmoothEdgeFont
-
- DOTTED_DASHED - Static variable in class nxopen.ViewDependentDisplayManager.Font
-
- DOTTED_DATUM - Static variable in class nxopen.uf.UFGdt.DatumAssocType
-
- DOTTEDDASHED - Static variable in class nxopen.preferences.SessionModeling.PolylineStyleType
-
- DOUBLE - Static variable in class nxopen.BasePropertyTable.BasePropertyType
-
- DOUBLE - Static variable in class nxopen.blockstyler.PropertyList.PropertyType
-
Double
- DOUBLE - Static variable in class nxopen.cae.connections.SeamWeldMaterialType
-
Seam weld double material type
- DOUBLE - Static variable in class nxopen.cae.PostScenarioVariantType
-
a real number
- DOUBLE - Static variable in class nxopen.cae.PropertyTable.PropertyType
-
BASE_PROPERTY_TABLE_property_type_double
- DOUBLE - Static variable in class nxopen.cam.CAMAttribute.ValueType
-
- DOUBLE - Static variable in class nxopen.cam.InspectionCmmCommandBuilder.VarTypes
-
Specifies a double variable
- DOUBLE - Static variable in class nxopen.cam.UdeParameter.ParameterTypes
-
- DOUBLE - Static variable in class nxopen.features.CustomAttribute.Type
-
Double.
- DOUBLE - Static variable in class nxopen.features.shipdesign.StiffenerSystemBuilder.OffsetSpacingModes
-
- DOUBLE - Static variable in class nxopen.mechatronics.ExpressionBlockBuilder.DataType
-
double
- DOUBLE - Static variable in class nxopen.mechatronics.HydraulicCylinderBuilder.OutputRodType
-
double rod
- DOUBLE - Static variable in class nxopen.mechatronics.MATLABClientBuilder.DataType
-
double
- DOUBLE - Static variable in class nxopen.mechatronics.MATLABSignalConnectionBuilder.DataType
-
float
- DOUBLE - Static variable in class nxopen.mechatronics.PneumaticCylinderBuilder.OutputRodType
-
double rod
- DOUBLE - Static variable in class nxopen.mechatronics.ProxyOverrideObjectBuilder.AttrType
-
- DOUBLE - Static variable in class nxopen.mechatronics.SHMSignalConnectionBuilder.DataType
-
double
- DOUBLE - Static variable in class nxopen.mechatronics.SignalAdapterBuilder.DataType
-
double
- DOUBLE - Static variable in class nxopen.mechatronics.SignalBuilder.DataType
-
double
- DOUBLE - Static variable in class nxopen.mechatronics.SymbolTableBuilder.DataType
-
double
- DOUBLE - Static variable in class nxopen.partfamily.FamilyAttribute.AttrType
-
double attribute
- DOUBLE - Static variable in class nxopen.pdm.PdmSoaqueryNxmgrfielddatatype
-
Double
- DOUBLE - Static variable in class nxopen.PropertyContainer.PropertyType
-
Double
- DOUBLE - Static variable in class nxopen.report.BaseArgument.Type
-
Argument for double data
- DOUBLE - Static variable in class nxopen.SpreadsheetCellData.Types
-
- DOUBLE - Static variable in class nxopen.weld.CharacteristicsValueBuilder.Type
-
Indicates the attribute value contains a double.
- DOUBLE_AARM_SUSPENSION - Static variable in class nxopen.motion.TextBasedElementBuilder.TypeChoices
-
- DOUBLE_ARRAY - Static variable in class nxopen.BasePropertyTable.BasePropertyType
-
- DOUBLE_ARRAY - Static variable in class nxopen.cae.PropertyTable.PropertyType
-
BASE_PROPERTY_TABLE_property_type_double_array
- DOUBLE_CLICK_REASON - Static variable in class nxopen.uistyler.StylerEvent.Reason
-
Double click reason
- DOUBLE_DRAW - Static variable in class nxopen.tooling.LsdynaGeometryPreparationBuilder.DrawType
-
For draw die, punch and binder are higher than die.
- DOUBLE_JAPANESE_POSTCARD - Static variable in class nxopen.PrintBuilder.PaperSize
-
Double Japanese Postcard, 200- by 148-millimeters: Windows 98/Me, Windows NT 4.0 and later
- DOUBLE_JAPANESE_POSTCARD_ROTATED - Static variable in class nxopen.PrintBuilder.PaperSize
-
Double Japanese Postcard Rotated, 148- by 200-millimeters: Windows 98/Me, Windows NT 4.0 and later
- DOUBLE_LINE - Static variable in class nxopen.annotations.FitAssemblyNewDisplayStyle
-
Display double line
- DOUBLE_MATRIX2D - Static variable in class nxopen.blockstyler.PropertyList.PropertyType
-
Double 2d-Matrix
- DOUBLE_MATRIX2D - Static variable in class nxopen.PropertyContainer.PropertyType
-
Double 2d-Matrix
- DOUBLE_OUTLINE - Static variable in class nxopen.uf.UFModl.PocketpadType
-
- DOUBLE_OUTLINE_CORNER - Static variable in class nxopen.uf.UFModl.PocketpadType
-
- DOUBLE_OUTLINE_NO_ATTACH - Static variable in class nxopen.uf.UFModl.PocketpadType
-
- DOUBLE_SCALE - Static variable in class nxopen.View.ScaleFactor
-
- DOUBLE_SIDED_COMPARISON - Static variable in class nxopen.validate.RequirementBuilder.DefinitionMethodOptions
-
- DOUBLE_SLEEVE - Static variable in class nxopen.features.shipdesign.PenetrationRequest.CompensationType
-
- DOUBLE_TYPE - Static variable in class nxopen.Part.PartFamilyAttrType
-
Deprecated.
double attribute
- DOUBLE_VECTOR - Static variable in class nxopen.blockstyler.PropertyList.PropertyType
-
Double Vector
- DOUBLE_VECTOR - Static variable in class nxopen.PropertyContainer.PropertyType
-
Double Vector
- DOUBLE_VLA - Static variable in class nxopen.features.CustomAttribute.Type
-
Double variable length array.
- doubleA() - Method in interface nxopen.tooling.ScrapDesignBuilder
-
Returns the double A served as the parameter of overcut
License requirements: None.
- doubleAngle() - Method in interface nxopen.tooling.ScrapDesignBuilder
-
Returns the double Angle served as the parameter of overcut
License requirements: None.
- DoubleArgument - Interface in nxopen.report
-
Represents an argument for double type data.
- DoubleArrayPreferenceData() - Constructor for class nxopen.preferences.RoutingUserPreferences.DoubleArrayPreferenceData
-
- doubleArraySize() - Method in interface nxopen.motion.LmsSolverProperty
-
Returns the double array size
License requirements: None.
- doubleB() - Method in interface nxopen.tooling.ScrapDesignBuilder
-
Returns the double B served as the parameter of overcut
License requirements: None.
- DoubleBlock - Interface in nxopen.blockstyler
-
Represents a Double block .
- doubleBorder() - Method in interface nxopen.annotations.TableSectionStyleBuilder
-
Returns the double border flag setting
License requirements: None.
- doubleClick(StylerEvent) - Method in interface nxopen.uistyler.MultiSelectList.DoubleClick
-
Called when a dialog user selects an entry with a single mouse click or presses the spacebar
on a selected item.
- doubleClick(StylerEvent) - Method in interface nxopen.uistyler.SelectionBox.DoubleClick
-
Called when a dialog user double-clicks on an option in the selection box or presses Return when an item is already selected.
- doubleClick(StylerEvent) - Method in interface nxopen.uistyler.SingleSelectList.DoubleClick
-
Called when a dialog user double-clicks on an option or presses Return when an item is already selected.
- DoubleData() - Constructor for class nxopen.ITableEditorDataProvider.DoubleData
-
- doubledata - Variable in class nxopen.ITableEditorDataProvider.DoubleData
-
the double data at the row and column specified
- doubleDefault() - Method in interface nxopen.annotations.MasterSymbolListItemBuilder
-
- doubleDirVecI() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
Returns the double dir vec i
License requirements: None.
- doubleDirVecJ() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
Returns the double dir vec j
License requirements: None.
- doubleDirVecK() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
Returns the double dir vec k
License requirements: None.
- doubleH() - Method in interface nxopen.tooling.ScrapDesignBuilder
-
Returns the double H served as the parameter of overcut
License requirements: None.
- DoubleIntentData - Class in nxopen.cam
-
The data for CamUI_DoubleIntentComp .
- DoubleIntentData() - Constructor for class nxopen.cam.DoubleIntentData
-
- DoubleIntentData(double, ParamValueIntent, Inheritance) - Constructor for class nxopen.cam.DoubleIntentData
-
Constructor for the DoubleIntentData object.
- doubleLower() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
Returns the lower tolerance
License requirements: None.
- doubleLowerParamOuterProfile() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
Returns the double lower parameter outer profile
License requirements: None.
- DoubleMatrixData() - Constructor for class nxopen.blockstyler.PropertyList.DoubleMatrixData
-
- DoubleMatrixData() - Constructor for class nxopen.PropertyContainer.DoubleMatrixData
-
- doubleMax() - Method in interface nxopen.annotations.MasterSymbolListItemBuilder
-
- doubleMin() - Method in interface nxopen.annotations.MasterSymbolListItemBuilder
-
- doubleNominal() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
Returns the nominal tolerance
License requirements: None.
- doubleParamExtArea() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
Returns the double parameter extent area
License requirements: None.
- doubleParamExtLength() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
Returns the double parameter extent length
License requirements: None.
- doubleParamOuterProfile() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
Returns the double parameter outer profile
License requirements: None.
- doubleParamTolValue() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
Returns the double parameter tolerance value
License requirements: None.
- doubleParamTolValue1() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
Returns the double parameter tolerance value1
License requirements: None.
- doublePassTranslucency() - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder
-
Returns the double pass translucency
License requirements: die_engineering ("DIE ENGINEERING")
.
- DoublePreferenceData() - Constructor for class nxopen.preferences.RoutingUserPreferences.DoublePreferenceData
-
- doubleR() - Method in interface nxopen.tooling.ScrapDesignBuilder
-
Returns the double R served as the parameter of overcut
License requirements: None.
- doubleSide() - Method in interface nxopen.blockstyler.SpecifyVector
-
Returns the DoubleSide
License requirements: None.
- doubleSidedMaximumValue() - Method in interface nxopen.validate.RequirementBuilder
-
Returns the maximum value in double sided comparison
License requirements: None.
- doubleSidedMinimumValue() - Method in interface nxopen.validate.RequirementBuilder
-
Returns the minimum value in double sided comparison
License requirements: None.
- DoubleStatusData - Class in nxopen.cam
-
The data for CamUI_DoubleStatusComp .
- DoubleStatusData() - Constructor for class nxopen.cam.DoubleStatusData
-
- DoubleStatusData(double, Inheritance) - Constructor for class nxopen.cam.DoubleStatusData
-
Constructor for the DoubleStatusData object.
- DoubleTable - Interface in nxopen.blockstyler
-
Represents a Double Table block .
- DoubleTable.MaximumValuesData - Class in nxopen.blockstyler
-
- doubleUpper() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
Returns the upper tolerance
License requirements: None.
- doublevalue - Variable in class nxopen.cam.NCAssistantBuilder.ResultsData
-
the corresponding analysis value of the face, depth, corner or fillets radius or draft angle
- doubleValue() - Method in interface nxopen.cam.UdeParameter
-
Returns the double value of the parameter
License requirements: None.
- doubleValue - Variable in class nxopen.mechatronics.ExpressionBlockBuilder.Slot
-
Data Value (double)
- doubleValue - Variable in class nxopen.mechatronics.SignalAdapterBuilder.SignalData
-
Data Value (double)
- doubleValue() - Method in interface nxopen.SpreadsheetCellData
-
Returns the double value stored in the cell.
- doubleValueExp - Variable in class nxopen.mechatronics.SignalBuilder.Signal
-
Data Value (double)
- doubleViewScale() - Method in interface nxopen.tooling.AssemblyDrawingBuilder
-
Returns a double view scale
License requirements: None.
- doubleViewVecI() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
Returns the double view vec i
License requirements: None.
- doubleViewVecJ() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
Returns the double view vec j
License requirements: None.
- doubleViewVecK() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
Returns the double view vec k
License requirements: None.
- doUpdate() - Method in interface nxopen.annotations.Table
-
Update tabular note
License requirements: None.
- doUpdate() - Method in interface nxopen.annotations.TitleBlock
-
Update Title Block
License requirements: drafting ("DRAFTING")
.
- doUpdate(boolean, boolean, boolean) - Method in interface nxopen.features.HumanBuilder
-
Update human
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- doUpdate(int) - Method in interface nxopen.Update
-
Updates the current session
License requirements: None.
- doUpload() - Method in interface nxopen.pdm.CAEFileContainer
-
Upload CAE files to Teamcenter, independent of a standard file->save.
- DOVE_TAIL_SLOT - Static variable in class nxopen.uf.UFModl.SlotType
-
- dowelHoleParent() - Method in interface nxopen.die.DrawDiePunchBuilder
-
Returns the dowel hole parent builder of the draw die punch.
- dowelHoleParent() - Method in interface nxopen.die.RotorBuilder
-
Returns the dowel holes parent builder of the rotor.
- dowelHoleParent() - Method in interface nxopen.die.SteelInsertBuilder
-
Returns the dowel hole parent builder of the diesteelinsert
License requirements: ug_die_design ("Die Design")
.
- DOWN - Static variable in class nxopen.ame.AncestorEvaluatorBuilder.JaAspectEvaluatorBuilderNavDirection
-
- DOWN - Static variable in class nxopen.annotations.PartsListBuilder.PartsListGrowDirectionOptions
-
- DOWN - Static variable in class nxopen.annotations.TableCellStyleBuilder.TabDirectionType
-
- DOWN - Static variable in class nxopen.annotations.TableSectionStyleBuilder.ContinuationPropertyType
-
Down
- DOWN - Static variable in class nxopen.diagramming.tables.ContinuationLocation
-
Down continuation location
- DOWN - Static variable in class nxopen.drawings.DrawingRegionBuilder.RegionVerticalGrowthDirection
-
- DOWN - Static variable in class nxopen.features.shipdesign.ManufacturingAssemblyNavigatorBuilder.OrientationType
-
Down Orientation
- DOWN - Static variable in class nxopen.features.shipdesign.StandardPartItemBuilder.Direction
-
down
- DOWN - Static variable in class nxopen.tooling.BendInsertDesignBuilder.BendingDirectionOption
-
bending down
- DOWN_ONLY - Static variable in class nxopen.cam.ProfileStrategy.Types
-
Profile strategy: Down Only
- DOWN_ONLY - Static variable in class nxopen.cam.RoughTurningBuilder.CleanupTypes
-
Cleanup mode: Down only
- DOWN_TO_NEAREST - Static variable in class nxopen.formboard.LayoutLengthOptions.RoundingMethod
-
Lengths are rounded down to
the nearest increment value.
- downArrow(String[], String[]) - Method in interface nxopen.gateway.BaseExplicitOrderBuilder
-
Moves down the row/rows selected by the user in the lists
License requirements: None.
- downdir - Variable in class nxopen.routing.SplinePathBuilder.IsSplineSlackedData
-
The slack direction.
- downDirection() - Method in interface nxopen.routing.RouteManager
-
Returns the down direction for the part used by Routing.
- DOWNFROM_TOP_LEFT - Static variable in class nxopen.drawings.DrawingRegionBuilder.RegionGrowthDirection
-
- DOWNFROM_TOP_RIGHT - Static variable in class nxopen.drawings.DrawingRegionBuilder.RegionGrowthDirection
-
- downloadAssociatedFiles(BasePart[], PdmFile[]) - Method in interface nxopen.pdm.FileManagement
-
Download the specified named reference files for NX use.
- downOffsetValue() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
Returns the expression containing the offset value of the down section(at 270 degrees).
- DOWNSTREAM - Static variable in class nxopen.cae.Post.StreamlineDirection
-
- DOWNSTREAM - Static variable in class nxopen.cae.Post.StreamlineSynchronization
-
- downToleranceForLength() - Method in interface nxopen.tooling.DieDesPierceInsertBuilder
-
Returns the down tolerance value for length.
- downToleranceForWidth() - Method in interface nxopen.tooling.DieDesPierceInsertBuilder
-
Returns the down tolerance value for width.
- DOWNWARD - Static variable in class nxopen.cae.xyplot.TextOrientation
-
Downward text orientation
- DPI150 - Static variable in class nxopen.display.StudioImageCaptureBuilder.DPIEnumType
-
Set image at 150 DPI resolution
- DPI72 - Static variable in class nxopen.display.StudioImageCaptureBuilder.DPIEnumType
-
Set image at 72 DPI resolution
- dpiEnum() - Method in interface nxopen.display.StudioImageCaptureBuilder
-
Returns the dpi enum
License requirements: None.
- dplaneNormal - Variable in class nxopen.uf.UFModeling.AskDatumPlaneData
-
- dplanePoint - Variable in class nxopen.uf.UFModeling.AskDatumPlaneData
-
- dplanes - Variable in class nxopen.uf.UFModlFeatures.AskDatumCsysComponentsData
-
- dplaneTag - Variable in class nxopen.uf.UFModlFeatures.CreateRelativeDplaneData
-
- dpmcvDriveCurves() - Method in interface nxopen.cam.DmCurveBuilder
-
Returns the Drive Curves
License requirements: cam_base ("CAM BASE")
.
- dpmcvEndPercBuilder() - Method in interface nxopen.cam.DmCurveBuilder
-
Returns the Curve Drive Method End Cut Range builder(inheritable double)
License requirements: None.
- dpmcvNumSegsBuilder() - Method in interface nxopen.cam.DmCurveBuilder
-
Returns the Point Type of Curve Drive Method Cut Step Type builder(inheritable int)
License requirements: None.
- dpmcvStartPercBuilder() - Method in interface nxopen.cam.DmCurveBuilder
-
Returns the Curve Drive Method Start Cut Range builder(inheritable double)
License requirements: None.
- dpmcvStepTolBuilder() - Method in interface nxopen.cam.DmCurveBuilder
-
Returns the Not Point Type of Curve Drive Method Cut Step Type builder(inheritable double)
License requirements: None.
- dpmcvStepType() - Method in interface nxopen.cam.DmCurveBuilder
-
Returns the Curve Cut Step Option
License requirements: None.
- DPMItpBuilder - Interface in nxopen.cam
-
- DPMItpBuilder.CrossCurvesMethodOption - Class in nxopen.cam
-
Enum of cross curves creation method
- DPMItpBuilder.CutTypeOption - Class in nxopen.cam
-
Enum of cut type
- DPMItpBuilder.SelectionMethodOption - Class in nxopen.cam
-
Enum of selection method
- DPMItpBuilder.StepMethodOption - Class in nxopen.cam
-
Enum of step method
- DPMItpBuilder.StepoverTypeOption - Class in nxopen.cam
-
Enum of stepover type
- DPMItpBuilder.ToolPositionOption - Class in nxopen.cam
-
Enum of tool position
- dpmrcBoundaryLeftBuilder() - Method in interface nxopen.cam.DmRadBuilder
-
Returns the rad band, Opposite Side builder
License requirements: None.
- dpmrcBoundaryRightBuilder() - Method in interface nxopen.cam.DmRadBuilder
-
Returns the rad band, Material Side builder
License requirements: None.
- dpmStepoverBuilder() - Method in interface nxopen.cam.DmRadBuilder
-
Returns the Stepover builder
License requirements: None.
- dpmStepoverMaxBuilder() - Method in interface nxopen.cam.DmRadBuilder
-
Returns the Maximum, Stepover for the Radial Cut method.
- dpmStepoverMinBuilder() - Method in interface nxopen.cam.DmRadBuilder
-
Returns the Constant, Stepover for the Radial Cut method.
- DPMTubeBuilder - Interface in nxopen.cam
-
Represents a Tube Drive Builder .
- dpud() - Method in interface nxopen.UFSession
-
- DRAFT - Static variable in class nxopen.cam.NCAssistantBuilder.AnalysisTypes
-
Analysis Type: Draft
- DRAFT - Static variable in class nxopen.CGMBuilder.ImageResolutionOption
-
Draft Resolution
- Draft - Interface in nxopen.features
-
Represents a Draft feature.
- draft() - Method in interface nxopen.features.ExtrudeBuilder
-
Returns the extrude draft operation
License requirements: None.
- DRAFT - Static variable in class nxopen.features.OffsetCurveBuilder.Types
-
Draft
- DRAFT - Static variable in class nxopen.PlotBuilder.ImageResolutionOption
-
Draft Resolution
- DRAFT - Static variable in class nxopen.preferences.SessionVisualizationHighQualityImage.ResolutionType
-
- DRAFT - Static variable in class nxopen.Print3dBuilder.PrintQualityEnum
-
- DRAFT - Static variable in class nxopen.PrintBuilder.ImageResolutionOption
-
Draft Resolution
- DRAFT - Static variable in class nxopen.PrintPDFBuilder.ImageResolutionOption
-
Draft Resolution
- DraftAidLine() - Constructor for class nxopen.uf.UFDrf.DraftAidLine
-
- DraftAidLine(int, int, UFDrf.SymbolInstance, int, double) - Constructor for class nxopen.uf.UFDrf.DraftAidLine
-
- DraftAidText() - Constructor for class nxopen.uf.UFDrf.DraftAidText
-
- DraftAidText(int, String, int, int, String) - Constructor for class nxopen.uf.UFDrf.DraftAidText
-
- DraftAidTextInfo() - Constructor for class nxopen.uf.UFDrf.DraftAidTextInfo
-
- DraftAidTextInfo(UFDrf.TextType, int, double, double, double[], double, double, double, double, double, double, int, UFDrf.DraftAidText[]) - Constructor for class nxopen.uf.UFDrf.DraftAidTextInfo
-
- draftAllInstances() - Method in interface nxopen.features.DraftBuilder
-
Returns the option "Draft all instances" [true/false]
License requirements: solid_modeling ("SOLIDS MODELING")
.
- DraftAnalysis - Interface in nxopen.geometricanalysis
-
Represents a Draft Analysis builder
To create or edit an instance of this class, use
DraftAnalysisBuilder
Created in NX8.0.0
- DraftAnalysisBuilder - Interface in nxopen.geometricanalysis
-
- DraftAnalysisBuilder.DrawDirection - Class in nxopen.geometricanalysis
-
define draw direction items
- DraftAnalysisBuilder.SelectOutput - Class in nxopen.geometricanalysis
-
define output options
- draftAngle() - Method in interface nxopen.cae.optimization.TBSCastCondition
-
Returns the draft angle
License requirements: None.
- draftAngle() - Method in interface nxopen.cam.GeometrySet
-
Returns the draft angle
License requirements: None.
- draftAngle() - Method in interface nxopen.facet.RemoveUndercutsBuilder
-
Returns the draft angle
License requirements: None.
- draftAngle() - Method in interface nxopen.features.DraftBodyBuilder
-
Returns the draft angle
License requirements: None.
- draftAngle() - Method in interface nxopen.features.OffsetCurveBuilder
-
Returns the angle
License requirements: None.
- draftAngle() - Method in interface nxopen.features.RibBuilder
-
Returns the draft angle
License requirements: None.
- draftAngle() - Method in interface nxopen.features.shipdesign.EndCutBuilder
-
Returns the draft angle
License requirements: None.
- draftAngle() - Method in interface nxopen.geometricutilities.SimpleDraft
-
Returns the draft angle
License requirements: None.
- draftAngle() - Method in interface nxopen.tooling.MoldFeatureRecognitionBuilder
-
Returns the draft angle
License requirements: None.
- draftAngleScale() - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder
-
Returns the draft angle scale
License requirements: die_engineering ("DIE ENGINEERING")
.
- DraftBody - Interface in nxopen.features
-
Represents a draft body feature
To create or edit an instance of this class, use
DraftBodyBuilder
Created in NX5.0.0
- DraftBodyBuilder - Interface in nxopen.features
-
- DraftBodyBuilder.MatchingScope - Class in nxopen.features
-
Describes the different match scopes.
- DraftBodyBuilder.MatchingType - Class in nxopen.features
-
Describes the different match types
- DraftBodyBuilder.MatchOption - Class in nxopen.features
-
Describes the different match options.
- DraftBodyBuilder.Method - Class in nxopen.features
-
Describes the Draft Body method as true draft or isocline draft.
- DraftBodyBuilder.RepairingPartingEdgeOption - Class in nxopen.features
-
Describes the different repair parting edges options.
- DraftBodyBuilder.RepairOption - Class in nxopen.features
-
Describes the different repair options.
- DraftBodyBuilder.Types - Class in nxopen.features
-
Describes the different Draft Body types
- draftBothSides() - Method in interface nxopen.features.DraftBuilder
-
Returns whether to draft on both sides of the reference
License requirements: None.
- DraftBuilder - Interface in nxopen.features
-
Represents a Draft Feature Builder that creates or edits a draft (Old name Taper) feature.
- DraftBuilder.DraftReferencesMethods - Class in nxopen.features
-
Describes the different Draft Methods in Draft References
- DraftBuilder.Method - Class in nxopen.features
-
Describes the Draft type as true draft or isocline draft.
- DraftBuilder.Type - Class in nxopen.features
-
Describes the different Draft types
- draftDirectionVector - Variable in class nxopen.uf.UFCurve.AskOffsetDirection2Data
-
- draftDirectionVector - Variable in class nxopen.uf.UFCurve.AskOffsetDirectionData
-
- draftHeight() - Method in interface nxopen.features.OffsetCurveBuilder
-
Returns the height
License requirements: None.
- DRAFTING - Static variable in class nxopen.drawings.GeneralWorkFlowBuilder.GridSettingsType
-
- DRAFTING - Static variable in class nxopen.DxfdwgCreator.OutputToOption
-
output to drafting
- DRAFTING - Static variable in class nxopen.FileNewApplication
-
Deprecated.
Specifies a drafting file new template
- DRAFTING - Static variable in class nxopen.NXTo2dCreator.OutputToOption
-
output to drafting
- drafting() - Method in interface nxopen.Part
-
Returns the DraftingManager for part .
- drafting() - Method in interface nxopen.preferences.PartPreferences
-
Returns object for doing Drafting preferences settings applicable to displayed part .
- DRAFTING - Static variable in class nxopen.preferences.SessionDrafting.GridObjectType
-
Drafting Grid
- drafting() - Method in interface nxopen.preferences.SessionPreferences
-
Returns object for doing Drafting preferences settings applicable to entire session .
- DRAFTING_ANNOTATION - Static variable in class nxopen.layout2d.Layout2dComponentMemberType
-
- DRAFTING_ANNOTATION_NON_DIMENSION - Static variable in class nxopen.layout2d.Layout2dComponentMemberType
-
- DRAFTING_ANNOTATIONS - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all drafting types.
- DRAFTING_DIMENSION - Static variable in class nxopen.layout2d.Layout2dComponentMemberType
-
- DRAFTING_DIMENSIONS - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide drafting dimensions
- DRAFTING_GDT - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide drafting gdt
- DRAFTING_IMAGE_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- DRAFTING_IMAGE_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- DRAFTING_NOTES - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide drafting notes
- DRAFTING_SYMBOLS - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide drafting symbols
- DraftingAid - Interface in nxopen.annotations
-
Represents a drafting aid
This is an abstract class.
- DraftingApplicationManager - Interface in nxopen.drafting
-
Represents an object that manages drafting objects and member views.
- DraftingArbitraryTarget - Interface in nxopen.annotations
-
Represents a drafting arbitrary datum target.
- draftingBodies() - Method in interface nxopen.drawings.DraftingView
-
Returns the DraftingBodyCollection .
- DraftingBody - Interface in nxopen.drawings
-
Represents a drafting body.
- DraftingBodyCollection - Interface in nxopen.drawings
-
- DraftingComponentSelectionBuilder - Interface in nxopen.drawings
-
This builder allows the user to select a view in which
component objects can be designated as primary or secondary geometry .
- DraftingComponentSelectionBuilder.Geometry - Class in nxopen.drawings
-
type of geometry
- DraftingCurve - Interface in nxopen.drawings
-
Represents a Drafting VD Curve.
- DraftingCurveCollection - Interface in nxopen.drawings
-
- DraftingCurveInfo - Interface in nxopen.drawings
-
Represents Drafting Curve Info .
- DraftingCurveInfo.DraftingCurveType - Class in nxopen.drawings
-
Specifies the drafting curve types
- draftingCurves() - Method in interface nxopen.drawings.DraftingBody
-
Returns the DraftingCurveCollection .
- DraftingCustomSymbolBuilder - Interface in nxopen.annotations
-
- DraftingDatum - Interface in nxopen.annotations
-
- DraftingDatumFeatureSymbolBuilder - Interface in nxopen.annotations
-
- DraftingDatumTarget - Interface in nxopen.annotations
-
- DraftingDatumTargetBuilder - Interface in nxopen.annotations
-
- DraftingDatumTargetCollection - Interface in nxopen.annotations
-
- draftingDatumTargets() - Method in interface nxopen.annotations.AnnotationManager
-
DraftingDatumTarget collection .
- DraftingDrawingSheet - Interface in nxopen.drawings
-
Represents a drafting drawing sheet.
- DraftingDrawingSheetBuilder - Interface in nxopen.drawings
-
- DraftingDrawingSheetCollection - Interface in nxopen.drawings
-
- draftingDrawingSheets() - Method in interface nxopen.Part
-
Returns the DraftingDrawingSheetCollection instance belonging to this part .
- DraftingFcf - Interface in nxopen.annotations
-
- DraftingFeatureControlFrameBuilder - Interface in nxopen.annotations
-
- DraftingImage - Interface in nxopen.annotations
-
- DraftingImage.ExportFileData - Class in nxopen.annotations
-
- DraftingImage.FileType - Class in nxopen.annotations
-
The export image file types
- DraftingImageCollection - Interface in nxopen.annotations
-
- draftingImages() - Method in interface nxopen.annotations.AnnotationManager
-
Drafting Image collection .
- DraftingLineTarget - Interface in nxopen.annotations
-
Represents a drafting line datum target
To create or edit an instance of this class, use
DraftingDatumTargetBuilder
Created in NX4.0.0
- DraftingManager - Interface in nxopen
-
Represents an object that manages drafting objects and member views.
- draftingManager() - Method in interface nxopen.Part
-
Returns the DraftingApplicationManager for part .
- draftingMode() - Method in interface nxopen.tooling.EWDraftingBuilder
-
Returns the drafting mode: create, add or edit.
- DraftingNoteBuilder - Interface in nxopen.annotations
-
- DraftingNoteBuilder.TextAlign - Class in nxopen.annotations
-
text over leader types for text
- DraftingNoteBuilder.ThicknessTypes - Class in nxopen.annotations
-
thickness types for text
- DraftingPoint - Interface in nxopen.drawings
-
Represents a Drafting VD Point.
- DraftingPointCollection - Interface in nxopen.drawings
-
- draftingPoints() - Method in interface nxopen.drawings.DraftingBody
-
Returns the DraftingPointCollection .
- DraftingPointTarget - Interface in nxopen.annotations
-
Represents drafting point datum target
To create or edit an instance of this class, use
DraftingDatumTargetBuilder
Created in NX4.0.0
- draftingPreference() - Method in interface nxopen.preferences.PartPreferences
-
Returns object to modify the Preference settings for PMI/drafting application .
- DraftingPreferenceManager - Interface in nxopen.preferences
-
Represents a collection of pmi preference builders.
- draftingSketchCircles() - Method in interface nxopen.annotations.HoleTableSettingsHoleFiltersBuilder
-
Returns the drafting sketch circles
License requirements: None.
- DraftingSplineBuilder - Interface in nxopen.features
-
Sketch Spline builder class.
- DraftingStandardChangeList - Interface in nxopen.options
-
Records changes to option values at the specified level.
- DraftingSurfaceFinish - Interface in nxopen.annotations
-
- DraftingSurfaceFinishBuilder - Interface in nxopen.annotations
-
- DraftingSurfaceFinishBuilder.FinishType - Class in nxopen.annotations
-
the valid types of finish type
- DraftingSurfaceFinishCollection - Interface in nxopen.annotations
-
- draftingSurfaceFinishStandard() - Method in interface nxopen.annotations.SymbolPreferences
-
Returns the drafting surface finish standard
License requirements: None.
- draftingSurfaceFinishStandard() - Method in interface nxopen.annotations.SymbolStyleBuilder
-
Returns the standard
License requirements: None.
- draftingSurfaceFinishSymbols() - Method in interface nxopen.annotations.AnnotationManager
-
Drafting surface finish collection .
- draftingSymbol() - Method in interface nxopen.diagramminglibraryauthor.Symbol2DBuilder
-
Returns the 2D symbol sub-builder.
- DraftingView - Interface in nxopen.drawings
-
Represents a drafting view.
- DraftingViewCollection - Interface in nxopen.drawings
-
- DraftingViewCollection.ViewCopyAnnotOption - Class in nxopen.drawings
-
Specifies the the annotation copy mode.
- DraftingViewCollection.ViewCopyDetailOption - Class in nxopen.drawings
-
Specifies the the view copy mode.
- DraftingViewCollection.ViewUpdateOption - Class in nxopen.drawings
-
Specifies which drafting views to update.
- draftingViews() - Method in interface nxopen.Part
-
Returns the DraftingViewCollection instance belonging to this part .
- draftingViews() - Method in interface nxopen.weld.AutoWeldSymbolsBuilder
-
Returns the candidate views for weld symbol creation
License requirements: None.
- draftIsoclineOrTruedraft() - Method in interface nxopen.features.DraftBuilder
-
Returns the Draft method
License requirements: solid_modeling ("SOLIDS MODELING")
.
- draftMethod() - Method in interface nxopen.features.DraftBodyBuilder
-
Returns the draft method
License requirements: None.
- draftOffset() - Method in interface nxopen.features.shipdesign.EndCutBuilder
-
Returns the draft offset.
- draftOption() - Method in interface nxopen.geometricutilities.MultiDraft
-
Returns the draft type
License requirements: None.
- DraftPointData - Interface in nxopen.geometricutilities
-
- draftPointData() - Method in interface nxopen.Part
-
Returns the collection of DraftPointData .
- DraftPointDataCollection - Interface in nxopen
-
This class contains the factory methods for creating a DraftPointData object.
- draftReferencesMethod() - Method in interface nxopen.features.DraftBuilder
-
Returns the draft references method
License requirements: None.
- draftType() - Method in interface nxopen.features.shipdesign.EndCutBuilder
-
Returns the draft type.
- draftType() - Method in interface nxopen.geometricutilities.SimpleDraft
-
Returns the simple draft type
License requirements: None.
- DraftVariableAngleData - Interface in nxopen.geometricutilities
-
Represents data containing variable angle draft point data objects
This class will not be created by the user.
- DRAG - Static variable in class nxopen.annotations.AssociativeOriginType
-
- DRAG - Static variable in class nxopen.features.subdivision.TransformCageData.TransformationMethodType
-
Edit cage topology by direct dragging
- drag(StylerEvent) - Method in interface nxopen.uistyler.IntegerScale.Drag
-
Called when a dialog user moves the slider up and down the scale.
- drag(StylerEvent) - Method in interface nxopen.uistyler.RealScale.Drag
-
Called when a dialog user moves the slider to a new position.
- DRAG_LINEAR - Static variable in class nxopen.features.subdivision.SubdivisionExtrudeCageBuilder.TransformationMethodType
-
Drag extruded topology in linear direction
- DRAG_REASON - Static variable in class nxopen.uistyler.StylerEvent.Reason
-
Drag reason
- dragByRay(Point3d, Vector3d) - Method in interface nxopen.positioning.Network
-
- dragByTransform(Vector3d, Matrix3x3) - Method in interface nxopen.positioning.Network
-
- dragByTransform(Vector3d, Matrix3x3) - Method in interface nxopen.routing.ClockPartBuilder
-
Drag the selected objects by the given translation and rotation.
- dragByTransform(Vector3d, Matrix3x3) - Method in interface nxopen.routing.TransformPathBuilder
-
Drag the selected objects by the given translation and rotation.
- dragByTranslation(Vector3d) - Method in interface nxopen.positioning.Network
-
- dragCurve() - Method in interface nxopen.features.RapidSurfaceBuilder
-
Returns the drag curve
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- dragCurvePoint() - Method in interface nxopen.features.RapidSurfaceBuilder
-
Drags curve point
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- dragCurvePointManager() - Method in interface nxopen.features.RapidSurfaceBuilder
-
Returns the curve used for drag curve point
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- dragData() - Method in interface nxopen.tooling.EnlargeSurfaceBuilder
-
Returns the drag preview body data from builder according to face.
- draggedObject - Variable in class nxopen.features.subdivision.CageManipulatorData.ObjectMoveData
-
The dragged object.
- dragHandlePositionPreference() - Method in interface nxopen.preferences.SessionAssemblies
-
Returns the drag handle position preference
License requirements: None.
- dragLineLength() - Method in interface nxopen.routing.EditLineSegmentBuilder
-
Updates the line length based on the expression stored in this builder.
- dragNDropMesh(Mesh, MeshCollector, MeshCollector) - Method in interface nxopen.cae.MeshManager
-
- dragObjects() - Method in interface nxopen.mechanicalrouting.EditPointBuilder
-
Perform a drag operation.
- dragObjects() - Method in interface nxopen.mechanicalrouting.MovePathBuilder
-
Perform a drag operation.
- drapingAbsMeshSize() - Method in interface nxopen.cae.LaminateDrapingDataBuilder
-
Returns the absolute draping mesh size
License requirements: None.
- drapingExtension() - Method in interface nxopen.cae.LaminatePly
-
Returns the draping extension selection
License requirements: None.
- drapingInput() - Method in interface nxopen.cae.LaminatePly
-
Returns the draping data (draping settings)
License requirements: None.
- drapingMeshRatio() - Method in interface nxopen.cae.LaminateDrapingDataBuilder
-
Returns the draping mesh ratio
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- drapingPath() - Method in interface nxopen.cae.LaminateDrapingDataBuilder
-
Returns the draping path
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- draw() - Method in interface nxopen.cae.PostAnnotation
-
Draw annotation object on graphics screen.
- draw() - Method in interface nxopen.UFSession
-
- DRAW_BAR - Static variable in class nxopen.die.AddendumSectionBuilder.SectionShapeType
-
Section consists of all segments in a draw bar shape.
- DRAW_DIE - Static variable in class nxopen.tooling.DieBaseBuilder.DieBaseTypeOpt
-
draw die type
- DRAW_DIRECTION - Static variable in class nxopen.die.DrawBeadBuilder.OrientSectionToDrawTypes
-
Orient height parameter to the draw direction.
- DRAW_DIRECTION - Static variable in class nxopen.die.DrawBeadBuilder.ProjectionDirectionTypes
-
Project the centerline along the draw direction vector.
- DRAW_ON_BOUNDARY - Static variable in class nxopen.features.RapidSurfaceBuilder.OperationTypes
-
draw on boundary
- DRAW_ON_FACET_BODY - Static variable in class nxopen.features.RapidSurfaceBuilder.OperationTypes
-
draw on facet body
- DRAW_PARENT_VIEW_LABEL_TEXT_ABOVE_STUB - Static variable in class nxopen.uf.UFDrf.ViewLabelTextToStubFormat
-
- DRAW_PARENT_VIEW_LABEL_TEXT_BEFORE_STUB - Static variable in class nxopen.uf.UFDrf.ViewLabelTextToStubFormat
-
- DrawBead - Interface in nxopen.die
-
Represents a draw bead feature.
- DrawBeadBuilder - Interface in nxopen.die
-
Represents a builder that is used to create or edit a
DrawBead
feature.
- DrawBeadBuilder.FemaleDepthTypes - Class in nxopen.die
-
Specifies how the female depth is calculated or defined.
- DrawBeadBuilder.FemaleWidthTypes - Class in nxopen.die
-
Specifies how the feamle width is calcualted or defined.
- DrawBeadBuilder.MaleBeadPositionTypes - Class in nxopen.die
-
Identifes which casting the male bead is created in.
- DrawBeadBuilder.OrientationTypes - Class in nxopen.die
-
Identifies the orientation of the base parameters to the sheet metal.
- DrawBeadBuilder.OrientSectionToDrawTypes - Class in nxopen.die
-
Specifies if the segment height section parameter should be oriented to the draw direction or the sheet metal normal at the section location.
- DrawBeadBuilder.OutputTypes - Class in nxopen.die
-
Specifies what type of output is desired for the feature creation.
- DrawBeadBuilder.ProjectionDirectionTypes - Class in nxopen.die
-
Identifes how the centerline should be projected to the placement face during processing.
- DrawBeadBuilder.TransitionDefinitionTypes - Class in nxopen.die
-
Specifies how the transition area should be determined from segment to segment within a single bead.
- drawBeadCurves() - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder
-
Returns the draw bead profiles.
- DrawBeadSegmentBuilder - Interface in nxopen.die
-
Segment builder for Die Engineering draw bead.
- DrawBeadSegmentBuilder.MaleBeadWidthTypes - Class in nxopen.die
-
value for how the male width is specified.
- DrawBeadSegmentBuilderList - Interface in nxopen.die
-
Represents a list of objects.
- DrawBeadTaperBuilder - Interface in nxopen.die
-
Taper definition for the end of the Die Engineering Draw Bead.
- DrawBeadTaperBuilder.TaperTypes - Class in nxopen.die
-
Taper types to define how the slope is created for the bead end.
- drawBeadTypeOption() - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder
-
Returns the draw bead type.
- drawBoundaryCurve() - Method in interface nxopen.features.RapidSurfaceBuilder
-
Draws boundary curve
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- drawBox() - Method in interface nxopen.cae.PostAnnotation
-
Returns the box drawing
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- drawCurve() - Method in interface nxopen.features.RapidSurfaceBuilder
-
Draws curve
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- drawDiePunch(Feature) - Method in interface nxopen.die.DieCollection
-
Creates the draw die punch feature builder.
- DrawDiePunch - Interface in nxopen.features
-
Represents a draw die punch feature.
- DrawDiePunchBuilder - Interface in nxopen.die
-
Represents a Draw Die Punch feature builder.
- DrawDiePunchBuilder.PunchProfileData - Class in nxopen.die
-
- DrawDiePunchSectionBuilder - Interface in nxopen.die
-
Represents a Draw Die Punch Section sub feature.
- DrawDiePunchSectionBuilder.FormingAttributesData - Class in nxopen.die
-
- DrawDiePunchSectionBuilder.PunchProfileAttributesData - Class in nxopen.die
-
- drawDirection() - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
Returns the draw direction used to define the normal of unform base plane.
- drawDirection() - Method in interface nxopen.die.AddendumSectionBuilder
-
Returns the draw direction.
- drawDirection() - Method in interface nxopen.die.DrawBeadBuilder
-
Returns the draw direction.
- drawDirection() - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
Returns the draw direction.
- drawDirection() - Method in interface nxopen.facet.RemoveUndercutsBuilder
-
Returns the draft vector
License requirements: None.
- drawDirection() - Method in interface nxopen.features.ConcaveFacesBuilder
-
Returns the vector representing the draw direction.
- drawDirection() - Method in interface nxopen.features.DraftBodyBuilder
-
Returns the draw direction
License requirements: None.
- drawing() - Method in interface nxopen.cam.WorkInstructionBuilder
-
- DRAWING - Static variable in class nxopen.drawings.ConvertDraftingContentsBuilder.SelectConversionEntityType
-
- DRAWING - Static variable in class nxopen.drawings.DrawingSheetBuilder.SheetBaseordrawingView
-
auto start drawing view
- DRAWING - Static variable in class nxopen.drawings.StandardViewsBuilder.View
-
drawing (2d) views
- DRAWING - Static variable in class nxopen.DxfdwgCreator.ExportDataOption
-
export drawing data
- DRAWING - Static variable in class nxopen.DxfdwgImporter.WorkflowAs
-
Drawing workflow
- DRAWING - Static variable in class nxopen.NXTo2dCreator.ExportDataOption
-
export drawings only
- DRAWING - Static variable in class nxopen.tooling.AssemblyDrawingBuilder.Types
-
- DRAWING - Static variable in class nxopen.tooling.CompDrawingBuilder.FilterSelection
-
filter componnets by drawing
- DRAWING - Static variable in class nxopen.tooling.LsdynaGeometryPreparationBuilder.ProcessType
-
The process of die travels from binder to punch.
- DRAWING_ANNOTATION - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all drafting annotations.
- DRAWING_AREA_FILL - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all drafting Area Fill.
- DRAWING_BALLOONS - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all drafting Balloons.
- DRAWING_CENTERLINES - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all drafting Centerlines.
- DRAWING_CROSSHATCH - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all drafting Crosshatch.
- DRAWING_CUSTOM_SYMBOLS - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all all drafting Custom Symbols.
- DRAWING_DATUM_FEATURE_SYMBOLS - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all drafting Datum Feature Symbols.
- DRAWING_DATUM_TARGETS - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all drafting Datum Targets.
- DRAWING_DIMENSIONS - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all drafting dimensions.
- DRAWING_DISPLAYED - Static variable in class nxopen.PartCollection.SdpsStatus
-
A drawing is currently displayed
- DRAWING_FEATURE_CONTROL_FRAME - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all drafting Feature Control Frames.
- DRAWING_GRID - Static variable in class nxopen.uf.UFDisp.GridContext
-
- DRAWING_HOLE_TABLES - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all Hole Tables.
- DRAWING_IMAGES - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all Images.
- DRAWING_INTERSECTION_SYMBOLS - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all drafting Intersection Symbols.
- DRAWING_MASTER_PART_NAME - Static variable in class nxopen.annotations.AssociativeText.PropertyType
-
Drawing master part name
- DRAWING_MEMBER_TYPE - Static variable in class nxopen.uf.UFView.Type
-
- DRAWING_NOTES - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all drafting Notes.
- DRAWING_NUMBER_OF_PRIMARY_SHEETS - Static variable in class nxopen.annotations.AssociativeText.PropertyType
-
Drawing sheet number of primary sheets
- DRAWING_NUMBER_OF_SHEETS - Static variable in class nxopen.annotations.AssociativeText.PropertyType
-
Drawing sheet number of sheets
- DRAWING_OBJECTS - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all drafting types.
- DRAWING_PART_NAME - Static variable in class nxopen.annotations.AssociativeText.PropertyType
-
Drawing part name
- DRAWING_PARTS_LISTS - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all Parts Lists.
- DRAWING_SHEET - Static variable in class nxopen.drawings.AssociativeAngleBuilder.EvaluationPlaneType
-
- DRAWING_SHEET - Static variable in class nxopen.DxfdwgImporter.SendModelDataAs
-
send model data to drawing sheet
- DRAWING_SHEET - Static variable in class nxopen.formboard.FaceAnnotationBuilder.DrwDestination
-
Place geometry in drawing sheet
- DRAWING_SHEET_NAME - Static variable in class nxopen.annotations.AssociativeText.PropertyType
-
Drawing sheet name
- DRAWING_SHEET_NUMBER - Static variable in class nxopen.annotations.AssociativeText.PropertyType
-
Drawing sheet number
- DRAWING_SHEET_PROJECTION_ANGLE - Static variable in class nxopen.annotations.AssociativeText.PropertyType
-
Drawing sheet projection angle
- DRAWING_SHEET_REVISION - Static variable in class nxopen.annotations.AssociativeText.PropertyType
-
Drawing sheet revision
- DRAWING_SHEET_SCALE_DENOMINATOR - Static variable in class nxopen.annotations.AssociativeText.PropertyType
-
Drawing sheet scale denominator
- DRAWING_SHEET_SCALE_NUMERATOR - Static variable in class nxopen.annotations.AssociativeText.PropertyType
-
Drawing sheet scale numerator
- DRAWING_SHEET_SIZE - Static variable in class nxopen.annotations.AssociativeText.PropertyType
-
Drawing sheet size
- DRAWING_SHEET_TYPE - Static variable in class nxopen.uf.UFView.Type
-
- DRAWING_SHEET_UNITS - Static variable in class nxopen.annotations.AssociativeText.PropertyType
-
Drawing sheet units
- DRAWING_SHEET_ZONE - Static variable in class nxopen.annotations.AssociativeText.PropertyType
-
Drawing sheet zone
- DRAWING_STANDARD - Static variable in class nxopen.drawings.GeneralWorkFlowBuilder.SettingsOrientationType
-
- DRAWING_SURFACE_FINISH_SYMBOLS - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all drafting Surface Finish Symbols.
- DRAWING_TABLES - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all drafting tables.
- DRAWING_TABULAR_NOTES - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all Tabular Notes.
- DRAWING_TARGET_POINT_SYMBOLS - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all drafting Target Point Symbols.
- DRAWING_TEMPLATE - Static variable in class nxopen.drawings.GeneralWorkFlowBuilder.SettingsOrientationType
-
- DRAWING_TITLE_BLOCKS - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all Title Blocks.
- DRAWING_TYPE - Static variable in class nxopen.tooling.ToolingCloneparttype
-
Drawing part
- DRAWING_VIEW - Static variable in class nxopen.DxfdwgImporter.SendLayoutsAs
-
send Layout data to drawing view
- DRAWING_VIEW - Static variable in class nxopen.DxfdwgImporter.SendModelDataAs
-
send model data to drawing view
- DRAWING_VIEW_PREFIX - Static variable in class nxopen.annotations.AssociativeText.PropertyType
-
Drawing view prefix
- DRAWING_VIEW_ROTATION_ANGLE - Static variable in class nxopen.annotations.AssociativeText.PropertyType
-
View rotation angle
- DRAWING_VIEW_SETTING - Static variable in class nxopen.drawings.ViewSettingsBuilder.RenderingStyleEnum
-
- DRAWING_WELD_SYMBOLS - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all drafting Weld Symbols.
- DrawingAnnotationBuilder - Interface in nxopen.features.shipdesign
-
This builder allows you to define the drawing annotation information.
- DrawingAnnotationBuilder.Annotation - Class in nxopen.features.shipdesign
-
Settings that indicate how to handle the exsiting annotation in the drawing.
- DrawingArea - Interface in nxopen.blockstyler
-
Represents a Drawing Area block .
- DrawingAutomationWizard - Interface in nxopen.drafting
-
Represents callback data for the drawing automation wizard.
- drawingAutomationWizardHandler(DrawingAutomationWizard) - Method in interface nxopen.DrawingUtils.DrawingAutomationWizardHandler
-
User defined method that is called whenever Booklet Wizard is committed.
- drawingCgmData() - Method in interface nxopen.PartSaveOptions
-
Returns the option indicating whether to generate the CGM data and
store it in the QAF when you save the part file
License requirements: None.
- drawingCompare() - Method in interface nxopen.Part
-
Returns the DraftingManager for part .
- DrawingCompareManager - Interface in nxopen
-
Represents an object that manages drawing compare.
- DrawingCompareSettingsBuilder - Interface in nxopen.drawings
-
- DrawingCompareSettingsBuilder.ChangeSymbolType - Class in nxopen.drawings
-
Deprecated.
Represents a Compare Settings Change symbol Types
- DrawingCompareSettingsBuilder.ComparisonBaseline - Class in nxopen.drawings
-
Deprecated.
Represents a Compare Settings ComparisonBaseline
- DrawingCompareSettingsBuilder.FontType - Class in nxopen.drawings
-
Deprecated.
Represents a Compare Settings Change symbol font types
- DrawingCompareSettingsBuilder.WidthType - Class in nxopen.drawings
-
Deprecated.
Represents a Compare Settings Change symbol width types
- DrawingCreationWizardBuilder - Interface in nxopen.drafting
-
- DrawingDisplayData() - Constructor for class nxopen.uf.UFDisp.DrawingDisplayData
-
- DrawingDisplayData(boolean, int, int, int, int, boolean) - Constructor for class nxopen.uf.UFDisp.DrawingDisplayData
-
- DrawingExplosion - Interface in nxopen.assemblies
-
Represents an explosion used in a drawing view of an arrangement.
- DrawingExplosionCollection - Interface in nxopen.assemblies
-
Represents a collection of drawing explosions
To obtain an instance of this class, refer to
ComponentAssembly
Created in NX12.0.0
- drawingExplosions() - Method in interface nxopen.assemblies.ComponentAssembly
-
The collection of
DrawingExplosion
s defined in the ComponentAssembly
Created in NX12.0.0
- drawingFileNamingRule() - Method in interface nxopen.tooling.CompDrawingBuilder
-
Returns the naming rule of drawing files.
- drawingFilter() - Method in interface nxopen.tooling.CompDrawingBuilder
-
Returns the drawing component drawing filter.
- drawingFormatsheet() - Method in interface nxopen.drafting.PreferencesBuilder
-
Returns the drawing format sheet builder
License requirements: None.
- DrawingFormatSheetBuilder - Interface in nxopen.drawings
-
- drawingFormatTitle() - Method in interface nxopen.annotations.EditSettingsBuilder
-
Returns the drawing format title block builder
License requirements: None.
- drawingFormatTitle() - Method in interface nxopen.drafting.PreferencesBuilder
-
Returns the drawing format title block builder
License requirements: None.
- DrawingFormatTitleBuilder - Interface in nxopen.annotations
-
- DrawingFormatTitleBuilder.TitleBlockPositionType - Class in nxopen.annotations
-
Represent the option of TitleBlockPosition that specifies Type display
- drawingList() - Method in interface nxopen.DxfdwgCreator
-
Returns the drawing list - comma separated list of drawings to export
License requirements: None.
- drawingList() - Method in interface nxopen.IgesCreator
-
Returns the drawing list - comma separated list of drawings
License requirements: None.
- drawingName() - Method in interface nxopen.features.shipdesign.DrawingPartBuilder
-
Returns the drawing name
License requirements: None.
- drawingName() - Method in interface nxopen.features.shipdesign.SectionViewBuilder
-
Returns the drawing name
License requirements: None.
- drawingName() - Method in interface nxopen.NXTo2dCreator
-
Returns the drawing Name - name of drawing to export
License requirements: None.
- DrawingPartBuilder - Interface in nxopen.features.shipdesign
-
- DrawingPartBuilderList - Interface in nxopen.features.shipdesign
-
Represents a list of objects.
- drawingPartList() - Method in interface nxopen.features.shipdesign.SectionDrawingBuilder
-
Returns the list of drawing parts in current NX session
License requirements: None.
- drawingPlane() - Method in interface nxopen.features.PolylineBuilder
-
Returns the drawing plane
License requirements: None.
- drawingPlane() - Method in interface nxopen.features.StudioSplineBuilderEx
-
Returns the drawing plane
License requirements: None.
- drawingPlaneOption() - Method in interface nxopen.features.GeneralConicBuilder
-
Returns the drawing plane.
- drawingPlaneOption() - Method in interface nxopen.features.PolylineBuilder
-
Returns a drawing plane option
License requirements: None.
- drawingPlaneOption() - Method in interface nxopen.features.StudioSplineBuilderEx
-
Returns a drawing plane option
License requirements: None.
- DrawingRegion - Interface in nxopen.drawings
-
Represents a Drawing Region
To create or edit an instance of this class, use
DrawingRegionBuilder
Created in NX8.0.0
- DrawingRegionBuilder - Interface in nxopen.drawings
-
- DrawingRegionBuilder.ContentToMove - Class in nxopen.drawings
-
Specifies the region content to move
- DrawingRegionBuilder.RegionContinuation - Class in nxopen.drawings
-
Specifies the region continuation type
- DrawingRegionBuilder.RegionDraftingObjectType - Class in nxopen.drawings
-
Specifies the drafting object type
- DrawingRegionBuilder.RegionGrowthDirection - Class in nxopen.drawings
-
- DrawingRegionBuilder.RegionHorizontalGrowthDirection - Class in nxopen.drawings
-
Specifies the region horizontal growth direction
- DrawingRegionBuilder.RegionVerticalGrowthDirection - Class in nxopen.drawings
-
Specifies the region vertical growth direction
- DrawingRegionCollection - Interface in nxopen.drawings
-
Represents a collection of drawing regions
Use
DrawingRegion
to get the instance of this class.
- drawingRegionRulesBuilder() - Method in interface nxopen.drawings.DrawingRegionBuilder
-
Returns the DrawingRegionRules builder
License requirements: nx_drawing_auto ("NX Drawing Automation")
.
- DrawingRegionRulesBuilder - Interface in nxopen.drawings
-
Represents a Drawing region rules builder .
- drawingRegions() - Method in interface nxopen.drafting.AutomationManager
-
Returns the RegionCollection instance .
- drawingSheet() - Method in interface nxopen.cam.WorkInstructionBuilder
-
Returns the selected drawing sheet
License requirements: None.
- DrawingSheet - Interface in nxopen.drawings
-
Represents a drawing sheet.
- drawingSheet() - Method in interface nxopen.features.shipdesign.GeneralArrangementViewBuilder
-
Returns the drawing sheet which the view on
License requirements: None.
- drawingSheet() - Method in interface nxopen.features.shipdesign.SectionViewBuilder
-
Returns the sheet on which to create this view.
- drawingSheet - Variable in class nxopen.uf.UFDrf.ImageData
-
- DrawingSheet.ProjectionAngleType - Class in nxopen.drawings
-
Specifies the projection angle of a drawing sheet.
- DrawingSheet.ScaleData - Class in nxopen.drawings
-
- DrawingSheet.StandardSheetSize - Class in nxopen.drawings
-
Standard Drawing sizes
- DrawingSheet.Unit - Class in nxopen.drawings
-
Specifies the units of the drawing sheet.
- DrawingSheetBuilder - Interface in nxopen.drawings
-
Represents a
DrawingSheetBuilder
This class was made abstract in NX12 and the creator (JA_DRAWING_SHEET_COLLECTION_drawing_sheet_builder) was deprecated
Created in NX5.0.0
- drawingSheetBuilder(DrawingSheet) - Method in interface nxopen.drawings.DrawingSheetCollection
-
- DrawingSheetBuilder - Interface in nxopen.features.shipdesign
-
- DrawingSheetBuilder.LayoutOptions - Class in nxopen.features.shipdesign
-
Settings to indicate the view layout type by row and column in hroizontal or vertical order.
- DrawingSheetBuilder.SheetBaseordrawingView - Class in nxopen.drawings
-
the base view or drawing view option
- DrawingSheetBuilder.SheetMode - Class in nxopen.drawings
-
the drawing sheet dialog mode
- DrawingSheetBuilder.SheetOption - Class in nxopen.drawings
-
the options for specifying the attributes of the new drawing sheet to be created.
- DrawingSheetBuilder.SheetProjectionAngle - Class in nxopen.drawings
-
the drawing sheet projection angle
- DrawingSheetBuilder.SheetStandardEnglishScale - Class in nxopen.drawings
-
the standard English drawing sheet scales
- DrawingSheetBuilder.SheetStandardMetricScale - Class in nxopen.drawings
-
the standard Metric drawing sheet scales
- DrawingSheetBuilder.SheetUnits - Class in nxopen.drawings
-
the drawing sheet units
- DrawingSheetBuilderList - Interface in nxopen.features.shipdesign
-
Represents a list of objects.
- DrawingSheetCollection - Interface in nxopen.drawings
-
Represents a collection of drawing sheets.
- drawingSheetList() - Method in interface nxopen.features.shipdesign.DrawingPartBuilder
-
Returns the drawing sheet list
License requirements: None.
- drawingSheetName() - Method in interface nxopen.tooling.DrawingSheetNameBuilder
-
Returns the drawing sheet name for adding a new drawing sheet
License requirements: None.
- DrawingSheetNameBuilder - Interface in nxopen.tooling
-
- drawingSheetNamingRule() - Method in interface nxopen.tooling.CompDrawingBuilder
-
Returns the naming rule of drawing sheets.
- drawingSheets() - Method in interface nxopen.Part
-
Returns the DrawingSheetCollection instance belonging to this part .
- drawingSizeEnum() - Method in interface nxopen.display.StudioImageCaptureBuilder
-
Returns the drawing size enum
License requirements: None.
- DrawingsPropertiesBuilder - Interface in nxopen.drawings
-
- DrawingsPropertiesBuilder.SecondaryComponentOptions - Class in nxopen.drawings
-
Options for managing the secondary geometry property on the components
- drawingStyle() - Method in interface nxopen.drafting.DrawingCreationWizardBuilder
-
Returns the drawing style.
- drawingSuffixName() - Method in interface nxopen.features.shipdesign.PinJigBuilder
-
Returns the suffix name of Pinjig drawing
License requirements: None.
- drawingTags - Variable in class nxopen.uf.UFDraw.AskDrawingsData
-
- drawingTemplate() - Method in interface nxopen.features.shipdesign.DrawingSheetBuilder
-
- drawingTemplate() - Method in interface nxopen.features.shipdesign.ExpansionDrawingBuilder
-
Returns the drawing template
License requirements: None.
- drawingTemplate() - Method in interface nxopen.features.shipdesign.SectionViewBuilder
-
- DrawingTemplateBuilder - Interface in nxopen.features.shipdesign
-
Represents a drawing template selection block .
- drawingType() - Method in interface nxopen.tooling.EWDraftingBuilder
-
Returns the drawing type used to create drafting.
- DrawingUtils - Interface in nxopen
-
Contains various drawing utility methods
To obtain an instance of this class, refer to
Session
Created in NX8.5.3
- drawingUtils() - Method in interface nxopen.Session
-
Returns the
DrawingUtils
instance belonging to this session
Created in NX8.5.3
- DrawingUtils.DrawingAutomationWizardHandler - Interface in nxopen
-
User defined method that is called whenever Booklet Wizard is committed.
- DrawingView - Interface in nxopen.drawings
-
Drawing View - an empty view created without any geometric objects.
- DrawingViewBuilder - Interface in nxopen.drawings
-
- drawLineBetweenPoints() - Method in interface nxopen.features.WavePointBuilder
-
Returns the draw line
License requirements: None.
- DrawnCutout - Interface in nxopen.features
-
Represents a DrawnCutout feature
To create or edit an instance of this class, use
DrawnCutoutBuilder
Created in NX5.0.0
- DrawnCutoutBuilder - Interface in nxopen.features.sheetmetal
-
Represents a Drawn Cutout feature builder.
- DrawnCutoutBuilder.DepthTypeOptions - Class in nxopen.features.sheetmetal
-
This enum represents the depth direction for the drawn cutout.
- DrawnCutoutBuilder.SectionSideOptions - Class in nxopen.features.sheetmetal
-
This enum represents the side of the section that the drawn cutout punches material.
- DrawnCutoutBuilder.SidewallTypeOptions - Class in nxopen.features.sheetmetal
-
The side walls material option.
- drawOption() - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder
-
Returns the draw option
License requirements: None.
- drawOrientation() - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder
-
Returns the draw orientation
License requirements: None.
- drawOrigin() - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder
-
Returns the draw origin
License requirements: None.
- drawText() - Method in interface nxopen.cae.xyplot.VectorStyle2DSetting
-
Returns a value indicating whether to draw annotation text
License requirements: None.
- drawTypeOption() - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder
-
Returns the draw type.
- drawVector() - Method in interface nxopen.die.SpringbackCompensationBuilder
-
Returns the vector indicating the draw direction.
- drawVector() - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder
-
Returns the draw vector
License requirements: None.
- drawVentHoles() - Method in interface nxopen.features.shipdesign.InverseBendingLinesBuilder
-
Returns the switch that determines if vent holes are drawn in the diagram.
- drawX() - Method in interface nxopen.annotations.DatumData
-
Returns the flag indicating whether to draw X, where the leader terminates
License requirements: None.
- drawX() - Method in interface nxopen.annotations.DatumTargetBuilder
-
- DRF - Static variable in class nxopen.cam.InspectionAnalyzeOutputBuilder.ReportingCsysType
-
Datum Reference Frame
- DRF - Static variable in class nxopen.cam.InspectionMethodBuilder.ToleranceDegreeOfFreedomCsysMode
-
DRF - Datum Reference Frame
- drf() - Method in interface nxopen.UFSession
-
- DRF_AID - Static variable in class nxopen.InferSnapType.SnapType
-
Snap point drafting aid
- DRF_TANGENT - Static variable in class nxopen.InferSnapType.SnapType
-
Snap point drafting tangent
- DrfData() - Constructor for class nxopen.uf.UFGdt.DrfData
-
- DrfData(String, String, UFGdt.DrfReference, UFGdt.DrfReference, UFGdt.DrfReference) - Constructor for class nxopen.uf.UFGdt.DrfData
-
- DrfReference() - Constructor for class nxopen.uf.UFGdt.DrfReference
-
- DrfReference(UFGdt.DatumReference, Tag) - Constructor for class nxopen.uf.UFGdt.DrfReference
-
- drfTransform() - Method in interface nxopen.cam.InspectionAnalyzeOutputBuilder
-
Returns the drf transform option
License requirements: None.
- drfTxt - Variable in class nxopen.uf.UFModl.DimensionData
-
- DRILL - Static variable in class nxopen.cam.CenterlineDrillTurningBuilder.CycleTypes
-
Cycle: Drill
- DRILL - Static variable in class nxopen.cam.Tool.Types
-
Drilling tool
- DRILL_BACK_COUNTERSINK - Static variable in class nxopen.cam.Tool.Subtypes
-
Back Countersink
- DRILL_BACK_SPOT_FACE - Static variable in class nxopen.cam.Tool.Subtypes
-
Back spot facing tool
- DRILL_BORE - Static variable in class nxopen.cam.Tool.Subtypes
-
Boring tool
- DRILL_BORING_BAR - Static variable in class nxopen.cam.Tool.Subtypes
-
Boring Bar tool
- DRILL_BREAK_CHIP - Static variable in class nxopen.cam.CenterlineDrillTurningBuilder.CycleTypes
-
Cycle: Drill, Break Chip
- DRILL_BURNISHING - Static variable in class nxopen.cam.Tool.Subtypes
-
Burnishing tool
- DRILL_CENTER_BELL - Static variable in class nxopen.cam.Tool.Subtypes
-
Centerdrill
- DRILL_CHAMFER_BORING_BAR - Static variable in class nxopen.cam.Tool.Subtypes
-
Chamfer Boring Bar tool
- DRILL_CORE - Static variable in class nxopen.cam.Tool.Subtypes
-
Core Drill
- DRILL_COUNTERBORE - Static variable in class nxopen.cam.Tool.Subtypes
-
Counterbore
- DRILL_COUNTERSINK - Static variable in class nxopen.cam.Tool.Subtypes
-
Countersink
- DRILL_DEEP - Static variable in class nxopen.cam.CenterlineDrillTurningBuilder.CycleTypes
-
Cycle: Drill, Deep
- DRILL_DIRECTION - Static variable in class nxopen.annotations.HoleTableSettingsContentBuilder.Content
-
DrillDirection
- DRILL_REAM - Static variable in class nxopen.cam.Tool.Subtypes
-
Reamer
- DRILL_SIZE_HOLE - Static variable in class nxopen.annotations.HoleCalloutSettingsBuilder.Featuretype
-
- DRILL_SIZE_HOLE - Static variable in class nxopen.features.HolePackageBuilder.Types
-
Drill Size hole
- DRILL_SPC_GROOVE - Static variable in class nxopen.cam.Tool.Types
-
Milling tool-T cutter
- DRILL_SPOT_DRILL - Static variable in class nxopen.cam.Tool.Subtypes
-
Spot drill
- DRILL_SPOT_FACE - Static variable in class nxopen.cam.Tool.Subtypes
-
Spot facing tool
- DRILL_STANDARD - Static variable in class nxopen.cam.Tool.Subtypes
-
Drilling tool
- DRILL_STEP - Static variable in class nxopen.cam.Tool.Subtypes
-
Step drill
- DRILL_TAP - Static variable in class nxopen.cam.Tool.Subtypes
-
Tap
- DRILL_THREAD_MILL - Static variable in class nxopen.cam.Tool.Subtypes
-
Thread mill
- DRILL_TYPE - Static variable in class nxopen.annotations.HoleTableSettingsContentBuilder.Content
-
DrillType
- DrillBackCountersinkTool - Interface in nxopen.cam
-
- DrillBackSpotfacingToolBuilder - Interface in nxopen.cam
-
- DrillBoreToolBuilder - Interface in nxopen.cam
-
- DrillBoringBarTool - Interface in nxopen.cam
-
- DrillBurnishingToolBuilder - Interface in nxopen.cam
-
- DrillCenterBellToolBuilder - Interface in nxopen.cam
-
- DrillChamferBoringBarTool - Interface in nxopen.cam
-
- DrillCoreToolBuilder - Interface in nxopen.cam
-
- DrillCounterboreToolBuilder - Interface in nxopen.cam
-
- DrillCtskToolBuilder - Interface in nxopen.cam
-
- DrillGeomBuilder - Interface in nxopen.cam
-
- drillingLocation() - Method in interface nxopen.cam.CenterlineDrillTurningBuilder
-
Returns the drilling location
License requirements: None.
- DrillMethodBuilder - Interface in nxopen.cam
-
- DrillReamerToolBuilder - Interface in nxopen.cam
-
- drillSize() - Method in interface nxopen.features.HolePackageBuilder
-
Returns the drill size - this is applicable for drill size hole
License requirements: None.
- drillSizeEndChamferAngle() - Method in interface nxopen.features.HolePackageBuilder
-
Returns the drill size end chamfer angle - this is applicable for drill size hole type
License requirements: None.
- drillSizeEndChamferEnabled() - Method in interface nxopen.features.HolePackageBuilder
-
Returns the drill size end chamfer enabled - this is applicable for drill size hole type
License requirements: None.
- drillSizeEndChamferOffset() - Method in interface nxopen.features.HolePackageBuilder
-
Returns the drill size end chamfer offset - this is applicable for drill size hole type
License requirements: None.
- drillSizeFitOption() - Method in interface nxopen.features.HolePackageBuilder
-
Returns the drill size screw fit Option - this is applicable for drill size hole
License requirements: None.
- drillSizeHoleDepth() - Method in interface nxopen.features.HolePackageBuilder
-
Returns the hole depth - this is applicable for drill size hole
License requirements: None.
- drillSizeHoleDiameter() - Method in interface nxopen.features.HolePackageBuilder
-
Returns the hole diameter - this is applicable for drill size hole
License requirements: None.
- drillSizeStandard() - Method in interface nxopen.features.HolePackageBuilder
-
Returns the drill size standard - this is applicable for drill size hole type
License requirements: None.
- drillSizeStartChamferAngle() - Method in interface nxopen.features.HolePackageBuilder
-
Returns the drill size start chamfer angle - this is applicable for drill size hole type
License requirements: None.
- drillSizeStartChamferEnabled() - Method in interface nxopen.features.HolePackageBuilder
-
Returns the drill size start chamfer enabled - this is applicable for drill size hole type
License requirements: None.
- drillSizeStartChamferOffset() - Method in interface nxopen.features.HolePackageBuilder
-
Returns the drill size start chamfer offset - this is applicable for drill size hole type
License requirements: None.
- drillSizeTipAngle() - Method in interface nxopen.features.HolePackageBuilder
-
Returns the tip angle - this is applicable for drill size hole
License requirements: None.
- DrillSpotdrillToolBuilder - Interface in nxopen.cam
-
- DrillSpotfaceToolBuilder - Interface in nxopen.cam
-
- DrillStdToolBuilder - Interface in nxopen.cam
-
- drillStep() - Method in interface nxopen.cam.CenterlineDrillTurningBuilder
-
Returns the drill step
License requirements: None.
- drillStepModifier1() - Method in interface nxopen.cam.CenterlineDrillTurningBuilder
-
Returns the drill step modifier1
License requirements: None.
- drillStepModifier2() - Method in interface nxopen.cam.CenterlineDrillTurningBuilder
-
Returns the drill step modifier2
License requirements: None.
- DrillStepToolBuilder - Interface in nxopen.cam
-
- DrillSurfaceBuilder - Interface in nxopen.cam
-
Represents a Drill Surface Builder
This is an abstract class and cannot be instantiated.
- DrillSurfaceBuilder.SurfaceType - Class in nxopen.cam
-
Drill surface type
- DrillTapToolBuilder - Interface in nxopen.cam
-
- DrillTapToolBuilder.ToolTapHolderTypeTypes - Class in nxopen.cam
-
tap holder type
- DrillTapToolBuilder.ToolThreadFormMethodTypes - Class in nxopen.cam
-
thread form method
- DrillThreadMillToolBuilder - Interface in nxopen.cam
-
- DrillThreadMillToolBuilder.ToolFormTypeTypes - Class in nxopen.cam
-
form type
- DrillToolBuilder - Interface in nxopen.cam
-
Represents a drill Tool Builder
This is an abstract class, and cannot be instantiated.
- DRIVE - Static variable in class nxopen.cam.TeachmodeProfileMoveBuilder.StartStopPositionMethods
-
Use drive geometry start or stop point
- DRIVE - Static variable in class nxopen.uf.UFCam.GeomType
-
- DRIVE_GEOM_COLOR - Static variable in class nxopen.uf.UFCamPref.CamPref
-
- DRIVE_TO_POINT - Static variable in class nxopen.cam.LaserControlPoint.ProcessTypes
-
Drive to Point
- driveBodies() - Method in interface nxopen.presslinesimulation.HydraulicLifterBuilder
-
Returns the plunger drive bodies.
- driveBodies() - Method in interface nxopen.presslinesimulation.LinearCamBuilder
-
Returns the drive bodies.
- driveBodies() - Method in interface nxopen.presslinesimulation.RotaryCamBuilder
-
Returns the drive bodies.
- driveBody() - Method in interface nxopen.tooling.SpindleSliderBuilder
-
Returns the drive body
License requirements: None.
- DriveChainItemBuilder - Interface in nxopen.cam
-
Represents the Drive Chain Item Builder
This cannot be instantiated
.
- DriveChainItemBuilderList - Interface in nxopen.cam
-
Represents a list of objects.
- driveColor() - Method in interface nxopen.cam.Preferences
-
Returns the drive color
License requirements: None.
- driveGeomColor - Variable in class nxopen.uf.UFCam.Preferences
-
- driveGeometry() - Method in interface nxopen.cam.DmSurfBuilder
-
Returns the drive geometry
License requirements: cam_base ("CAM BASE")
.
- driveGeometryType() - Method in interface nxopen.cam.TeachmodeProfileMoveBuilder
-
Returns the drive geometry type
License requirements: None.
- driveMode() - Method in interface nxopen.cam.BlendFinish
-
Returns the Drive Mode
License requirements: None.
- DriveMode - Interface in nxopen.cam
-
Drive Mode Builder .
- DriveMode.Type - Class in nxopen.cam
-
Available types for Drive Mode .
- drivenByExpression(Expression) - Method in interface nxopen.features.GeodesicPoint
-
Edit a
GeodesicSketch
driven by an expression
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX10.0.0
- DrivenCamBuilder - Interface in nxopen.presslinesimulation
-
Represents a PressLineSimulation.DrivenCam builder.
- drivePoint() - Method in interface nxopen.cam.ChamferMillingBuilder
-
Returns the drive point
License requirements: None.
- drivePoint() - Method in interface nxopen.cam.PlanarMillingBuilder
-
Returns the drive point
License requirements: None.
- driver() - Method in interface nxopen.features.vehicledesign.BaseDataBuilder
-
- DRIVER - Static variable in class nxopen.features.vehicledesign.ManikinBuilder.PositionType
-
Driver Type
- DRIVER - Static variable in class nxopen.HumanPosturePredictionBuilder.OccupantType
-
Indicate Driver
- driver() - Method in interface nxopen.sim.SimDebugBuilder
-
Returns the driver
License requirements: None.
- DRIVER - Static variable in class nxopen.sim.SimDebugBuilder.KinematicModelType
-
Driver Kinematic Model
- DRIVER_SIDE - Static variable in class nxopen.features.vehicledesign.MirrorCertificationBuilder.LocationType
-
Represents the driver side location
- driverGraph() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
Returns the option to specify which driver definition is used in the suspension template.
- driverGraphSketch() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
Returns the sketch defining the driver for the suspension template.
- driverMotions() - Method in interface nxopen.motion.LinkDriverBuilder
-
Returns the Driver Motions
License requirements: mechanisms ("MECHANISMS")
.
- DriverMotionsData - Interface in nxopen.motion
-
- DriverMotionsData.DriverDataType - Class in nxopen.motion
-
Driver Data Type
- DriverMotionsData.DriverRotationType - Class in nxopen.motion
-
Driver Rotation type
- DriverMultiOperations - Interface in nxopen.motion
-
- driverMultiOperations() - Method in interface nxopen.motion.JointDriverBuilder
-
Returns the driver operations
License requirements: None.
- DriverOperation - Interface in nxopen.motion
-
- DriverOperation.IntegrationType - Class in nxopen.motion
-
Integration type
- DriverOperation.Type - Class in nxopen.motion
-
Driver operation type
- driverPlane() - Method in interface nxopen.features.vehicledesign.VisionPlaneBuilder
-
Returns the driver side plane inclined angle.
- driverSide() - Method in interface nxopen.features.vehicledesign.BaseDataDriverBuilder
-
Returns the Driver side.
- driverSideExtension() - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder
-
Returns the expression containing the value for the driver side extension.
- driverSideFacetBodies() - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder
-
Returns the facet body that represents the mirror surface at driver side.
- driverSideMirrorFace() - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder
-
Returns the face that represents the mirror surface at driver side.
- driverSideStandard() - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder
-
Returns the standard for the driver side mirror.
- driveStock() - Method in interface nxopen.cam.GeometrySet
-
Returns the drive stock
License requirements: None.
- driveStock() - Method in interface nxopen.cam.SurfaceDriveGeometrySet
-
Returns the drive stock
License requirements: None.
- driveVector() - Method in interface nxopen.tooling.SpindleSliderBuilder
-
Returns the direction that drive body drives spindle slider
License requirements: None.
- driving() - Method in interface nxopen.annotations.AngularDimensionBuilder
-
Returns the driving
License requirements: None.
- DRIVING - Static variable in class nxopen.annotations.DrivingValueBuilder.DrivingValueMethod
-
- driving() - Method in interface nxopen.annotations.GeodesicDimensionBuilder
-
Returns the driving value builder, which manages driving dimension values
License requirements: None.
- driving() - Method in interface nxopen.annotations.LinearDimensionBuilder
-
Returns the driving
License requirements: None.
- driving() - Method in interface nxopen.annotations.OrdinateDimensionBuilder
-
Returns the driving
License requirements: None.
- driving() - Method in interface nxopen.annotations.RadialDimensionBuilder
-
Returns the driving
License requirements: None.
- driving() - Method in interface nxopen.annotations.RapidDimensionBuilder
-
Returns the driving
License requirements: None.
- driving() - Method in interface nxopen.SketchAngularDimensionBuilder
-
Returns the driving value builder, which manages driving dimension values
License requirements: None.
- DRIVING - Static variable in class nxopen.SketchAutoDimensionBuilder.DimType
-
Driving dimension
- DRIVING - Static variable in class nxopen.SketchDimensionalConstraint.DimensionStateType
-
Driving dimension
- driving() - Method in interface nxopen.SketchLinearDimensionBuilder
-
Returns the driving value builder, which manages driving dimension values
License requirements: None.
- driving() - Method in interface nxopen.SketchRadialDimensionBuilder
-
Returns the driving value builder, which manages driving dimension values
License requirements: None.
- driving() - Method in interface nxopen.SketchRapidDimensionBuilder
-
Returns the driving value builder, which manages driving dimension values
License requirements: None.
- drivingMethod() - Method in interface nxopen.annotations.DrivingValueBuilder
-
Returns the driving method
License requirements: None.
- drivingPostureCheck() - Method in interface nxopen.features.vehicledesign.ManikinBuilder
-
Returns the driving posture check.
- DrivingValueBuilder - Interface in nxopen.annotations
-
.
- DrivingValueBuilder.DrivingExpressionMode - Class in nxopen.annotations
-
the driving expression mode
- DrivingValueBuilder.DrivingValueMethod - Class in nxopen.annotations
-
the driving value method
- drname() - Method in interface nxopen.routing.DesignRule
-
- DROP_IMPACT - Static variable in class nxopen.cae.responsesimulation.VelocityImpactExcitationBuilder.ImpactMethodType
-
the users will be able to specify the drop height or the desired velocity at the impact
- dropFace() - Method in interface nxopen.tooling.ReusableObjectPasteBuilder
-
Returns the drop face required for reattach sketch when using one-pick position method
License requirements: None.
- dropHeight() - Method in interface nxopen.cae.responsesimulation.VelocityImpactParameters
-
Returns the drop height.
- dropLDSmartPart(ReuseLibraryDragData, Vector3d) - Method in interface nxopen.linedesigner.ReuseLibraryUtilityBuilder
-
To handle dropping of LD smart part
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- dropNormalPart(ReuseLibraryDragData, Vector3d) - Method in interface nxopen.linedesigner.ReuseLibraryUtilityBuilder
-
To handle dropping of normal part
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- dropObject() - Method in interface nxopen.tooling.ReusePositioningObjectBuilder
-
Returns the drop face required for reattach sketch when using one-pick position method
License requirements: None.
- dropOtherPart(ReuseLibraryDragData, Vector3d) - Method in interface nxopen.linedesigner.ReuseLibraryUtilityBuilder
-
To handle dropping of other part
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- dropPTSPart(ReuseLibraryDragData, Vector3d) - Method in interface nxopen.linedesigner.ReuseLibraryUtilityBuilder
-
To handle dropping of PTS part
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- dropThruDiameter() - Method in interface nxopen.die.HoleChildBuilder
-
Returns the drop thru diameter of the die hole.
- dropThruDiameter() - Method in interface nxopen.die.HoleParentBuilder
-
Returns the drop thru diameter of die holes.
- drpos - Variable in class nxopen.uf.UFScop.GetNextDrivePointData
-
- drpos() - Method in interface nxopen.UFSession
-
- dryRun() - Method in interface nxopen.features.shipdesign.TransitionBuilder
-
Executes a dry run to check whether there are circular references in the basic design structure model and whether the intersection seam is using split or not.
- DSHEET - Static variable in class nxopen.PrintBuilder.PaperSize
-
D Sheet, 22- by 34-inches
- DTL - Static variable in class nxopen.ame.PlcDataType
-
- dtrayheight - Variable in class nxopen.mfg.am.BuildTray.DimensionsData
-
- DUAL_BRACKET - Static variable in class nxopen.annotations.LineComponent.LineType
-
dual bracket
- DUAL_DIM_TEXT - Static variable in class nxopen.uf.UFDrf.TextType
-
- DUAL_DIMENSION - Static variable in class nxopen.annotations.TextComponent.TextType
-
dual dimension text
- DUAL_DIMENSION_ABOVE - Static variable in class nxopen.uf.UFDrf.DualDimensionFormat
-
- DUAL_DIMENSION_AFTER - Static variable in class nxopen.uf.UFDrf.DualDimensionFormat
-
- DUAL_DIMENSION_BEFORE - Static variable in class nxopen.uf.UFDrf.DualDimensionFormat
-
- DUAL_DIMENSION_BELOW - Static variable in class nxopen.uf.UFDrf.DualDimensionFormat
-
- DUAL_FOUR_AXIS_ON_DRIVE - Static variable in class nxopen.cam.ToolAxisVariable.Types
-
Dual 4-Axis on Drive
- DUAL_FOUR_AXIS_ON_PART - Static variable in class nxopen.cam.ToolAxisVariable.Types
-
Dual 4-Axis on Part
- DUAL_TOLERANCE - Static variable in class nxopen.annotations.TextComponent.TextType
-
dual tolerance text
- DUAL_TOLERANCE_TEXT - Static variable in class nxopen.uf.UFDrf.TextType
-
- dualConvertTolerance - Variable in class nxopen.uf.UFDrf.UnitsFormatPreferences
-
- dualDimensionCenterDimensionLine() - Method in interface nxopen.annotations.UnitsFormatPreferences
-
Returns the center dimension line flag for dual dimension.
- dualDimensionCenterDimensionLine() - Method in interface nxopen.annotations.UnitsStyleBuilder
-
Returns the center dimension line flag for dual dimension.
- dualDimensionDecimalPlaces() - Method in interface nxopen.annotations.LinearTolerance
-
Returns the number of decimal places for dual dimension
License requirements: None.
- dualDimensionFormat() - Method in interface nxopen.annotations.UnitsStyleBuilder
-
Returns the dual dimension format.
- dualDimensionFormat - Variable in class nxopen.uf.UFDrf.UnitsFormatPreferences
-
- dualDimensionFractionDenominator() - Method in interface nxopen.annotations.DimensionPreferences
-
Returns the dual dimension and tolerance fraction denominator
License requirements: None.
- dualDimensionFractionDenominator() - Method in interface nxopen.annotations.DimensionStyleBuilder
-
Returns the dual dimension fractional denominator
License requirements: None.
- DualDimensionPlacement - Class in nxopen.annotations
-
Specifies the dual dimension placement relative to the primary dimension
- dualDimensionPlacement() - Method in interface nxopen.annotations.UnitsFormatPreferences
-
Returns the dual dimension placement relative to the primary dimension
License requirements: None.
- dualDimensionTextFormat() - Method in interface nxopen.annotations.UnitsFormatPreferences
-
Returns the dual dimension text format
License requirements: None.
- dualDimensionUnit() - Method in interface nxopen.annotations.UnitsFormatPreferences
-
Returns the dual dimension unit
License requirements: None.
- dualDimensionUnits() - Method in interface nxopen.annotations.UnitsStyleBuilder
-
Returns the dual dimension units
License requirements: None.
- dualDimensionUnits - Variable in class nxopen.uf.UFDrf.UnitsFormatPreferences
-
- dualDimensionValueDp - Variable in class nxopen.uf.UFDrf.DimensionPreferences
-
- dualDimensionValueDp - Variable in class nxopen.uf.UFDrf.DimensionPreferences1
-
- dualDimensionValuePrecision() - Method in interface nxopen.annotations.DimensionStyleBuilder
-
Returns the dual dimension value precision
License requirements: None.
- dualFractionDenominator - Variable in class nxopen.uf.UFDrf.DimensionPreferences
-
- dualFractionDenominator - Variable in class nxopen.uf.UFDrf.DimensionPreferences1
-
- dualFractionType() - Method in interface nxopen.annotations.UnitsStyleBuilder
-
Returns the decimal and fraction format for dual nonmetric dimensions
License requirements: None.
- dualFractionType - Variable in class nxopen.uf.UFDrf.UnitsFormatPreferences
-
- dualText - Variable in class nxopen.uf.UFDrf.AskDimensionTextData
-
- dualTextLines - Variable in class nxopen.annotations.Dimension.DimensionTextData
-
List of dual text lines
- dualToleranceDecimalPlaces() - Method in interface nxopen.annotations.LinearTolerance
-
Returns the number of decimal places for dual tolerance
License requirements: None.
- dualToleranceValueDp - Variable in class nxopen.uf.UFDrf.DimensionPreferences
-
- dualToleranceValueDp - Variable in class nxopen.uf.UFDrf.DimensionPreferences1
-
- dualToleranceValuePrecision() - Method in interface nxopen.annotations.DimensionStyleBuilder
-
Returns the dual tolerance value precision
License requirements: None.
- DUCK - Static variable in class nxopen.cae.responsesimulation.DDAMExcitation.MountingType
-
- ductAreaExp() - Method in interface nxopen.routing.DuctSizeCalculatorBuilder
-
Returns the duct area
License requirements: routing_hvac ("Routing HVAC")
.
- ductAspectRatioExp() - Method in interface nxopen.routing.DuctSizeCalculatorBuilder
-
Returns the Aspect ratio of the duct dimentions
License requirements: routing_hvac ("Routing HVAC")
.
- ductDiameterExp() - Method in interface nxopen.routing.DuctSizeCalculatorBuilder
-
Returns the duct diameter
License requirements: routing_hvac ("Routing HVAC")
.
- ductEqvalentDiameterExp() - Method in interface nxopen.routing.DuctSizeCalculatorBuilder
-
Returns the duct equivalent diameter
License requirements: routing_hvac ("Routing HVAC")
.
- ductHeightExp() - Method in interface nxopen.routing.DuctSizeCalculatorBuilder
-
Returns the duct height
License requirements: routing_hvac ("Routing HVAC")
.
- DuctReinforcement - Interface in nxopen.routing
-
Represents a Duct Reinforcement feature used for creating/editing reinforcements
on the inside or outside of rectangular HVAC ducts.
- DuctReinforcementBuilder - Interface in nxopen.routing
-
Builder for creating/editing duct reinforcements.
- DuctReinforcementBuilder.ReinforcementTypes - Class in nxopen.routing
-
Specifies the type of duct reinforcements.
- ductShape() - Method in interface nxopen.routing.DuctSizeCalculatorBuilder
-
Returns the shape of the duct
License requirements: routing_hvac ("Routing HVAC")
.
- DuctSizeCalculatorBuilder - Interface in nxopen.routing
-
Builder to perform calculations of the duct which is to be used in the HVAC applications.
- DuctSizeCalculatorBuilder.DuctShapeType - Class in nxopen.routing
-
This enum represents the shape of the duct
- ductSizeCalculatorCreateStockPlugin(Curve[], CustomManager.DuctSizeCalculatorDuctShape, double, double, double) - Method in interface nxopen.routing.CustomManager.DuctSizeCalculatorCreateStockPlugin
-
This defines the prototype for the Duct Size Calculator's Create Stock plugin.
- ductSizeCalculatorDisplayNotePlugin(Curve, CustomManager.DuctSizeCalculatorDisplayNoteFlag) - Method in interface nxopen.routing.CustomManager.DuctSizeCalculatorDisplayNotePlugin
-
This defines the prototype for the Duct Size Calculator's Display Note plugin.
- ductWidthExp() - Method in interface nxopen.routing.DuctSizeCalculatorBuilder
-
Returns the duct width
License requirements: routing_hvac ("Routing HVAC")
.
- dueDate() - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder
-
Returns the due date
License requirements: None.
- dueDate() - Method in interface nxopen.features.shipdesign.PenetrationReviewRequestBuilder
-
Returns the due date
License requirements: None.
- dueDate() - Method in interface nxopen.issue.IssueContent
-
Returns the due date
License requirements: nx_issue_mgmt ("NX Issue Tracking")
.
- dueDate() - Method in interface nxopen.issue.IssueContentBuilder
-
Returns the due date
License requirements: nx_issue_mgmt ("NX Issue Tracking")
.
- DUHAMELD_INTEGRAL - Static variable in class nxopen.cae.responsesimulation.EvaluationParameters.AnalysisIntegrationMethod
-
- DUMB - Static variable in class nxopen.ApparentChainingRuleType
-
Dumb Curves
- DUMB_COPY - Static variable in class nxopen.routing.RoutePartDescriptor.SourceType
-
- dummy(Part) - Method in interface nxopen.ame.AmeDebugSession
-
A dummy function to cause the Session object to be includded
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- DUMMY - Static variable in class nxopen.cae.DurSpecialistEvent.SelectionCriterionType
-
nonsense
- dummyScale() - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
Returns the dummy scale
License requirements: None.
- dump() - Method in interface nxopen.sim.SimDebugBuilder
-
Returns the dump
License requirements: None.
- dumpMidsurfFacepairReport(String, Tag) - Method in interface nxopen.uf.UFModlFeatures
-
- dumpOutput() - Method in interface nxopen.sim.SimDebugBuilder
-
Returns the dump output
License requirements: None.
- dumpToFileName() - Method in interface nxopen.sim.SimDebugBuilder
-
Returns the output filename
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- dumpValidationInfo(String) - Method in interface nxopen.pdm.SessionSettings
-
Dump the validation info .This API can be used to expose the current state from the
UGMGR session, typically the information about the session,assembly,components,their states
etc.
- DupinBuilder - Interface in nxopen.geometricanalysis
-
The Dupin Indicatrix is a tool to geometrically display the surface curvature at a specified point on a surface.
- dupinIndicatrix() - Method in interface nxopen.features.shipdesign.RollingLineBuilder
-
Returns the dupin indicatrix for surface analysis.
- duplicate(Tag, String) - Method in interface nxopen.uf.UFParam
-
- DUPLICATE_VIEW - Static variable in class nxopen.drawings.DraftingViewCollection.ViewCopyDetailOption
-
duplicate view
- duplicateCheck() - Method in interface nxopen.weld.WeldJointBuilder
-
Returns the indication to not allow new joints to be created if they are duplicates of exising joints
License requirements: None.
- duplicateElementGroupsCount() - Method in interface nxopen.cae.modelcheck.DuplicateElementsCheckBuilder
-
Returns the duplicate elements group count, each group contains elements that are
duplicates of each other and each group contains at least two duplicate elements
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- DuplicateElementsCheckBuilder - Interface in nxopen.cae.modelcheck
-
- DuplicateElementsCheckBuilder.DeletePreference - Class in nxopen.cae.modelcheck
-
Represents the duplicate elements deleting preference
- DuplicateElementsCheckBuilder.DisplaySettings - Class in nxopen.cae.modelcheck
-
Represents the display settings of duplicated elements detected
- duplicateNodeGroupsCount() - Method in interface nxopen.cae.modelcheck.DuplicateNodesCheckBuilder
-
Returns the duplicate nodes group count, each group contains nodes that are
duplicates of each other and each group contains at least two duplicate nodes
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- DuplicateNodesCheckBuilder - Interface in nxopen.cae.modelcheck
-
- DuplicateNodesCheckBuilder.DisplaySettings - Class in nxopen.cae.modelcheck
-
Represents the display settings data
- DuplicateNodesCheckBuilder.ListOption - Class in nxopen.cae.modelcheck
-
Represents the duplicate nodes merging preference
- DuplicateNodesCheckBuilder.MergePreference - Class in nxopen.cae.modelcheck
-
Represents the duplicate nodes merging preference
- duplicatesAllowed() - Method in interface nxopen.ame.SelectAMEBaseNodeList
-
Returns whether duplicate objects are allowed in the selection list.
- duplicatesAllowed() - Method in interface nxopen.annotations.SelectAnnotationList
-
Returns whether duplicate objects are allowed in the selection list.
- duplicatesAllowed() - Method in interface nxopen.annotations.SelectBaseCustomSymbolList
-
Returns whether duplicate objects are allowed in the selection list.
- duplicatesAllowed() - Method in interface nxopen.annotations.SelectOrdinateDimensionList
-
Returns whether duplicate objects are allowed in the selection list.
- duplicatesAllowed() - Method in interface nxopen.annotations.SelectTableSectionList
-
Returns whether duplicate objects are allowed in the selection list.
- duplicatesAllowed() - Method in interface nxopen.assemblies.SelectComponentList
-
Returns whether duplicate objects are allowed in the selection list.
- duplicatesAllowed() - Method in interface nxopen.cae.SelectCAEBodyList
-
Returns whether duplicate objects are allowed in the selection list.
- duplicatesAllowed() - Method in interface nxopen.cae.SelectCAEEdgeList
-
Returns whether duplicate objects are allowed in the selection list.
- duplicatesAllowed() - Method in interface nxopen.cae.SelectCAEFaceList
-
Returns whether duplicate objects are allowed in the selection list.
- duplicatesAllowed() - Method in interface nxopen.cae.SelectFEElemFaceList
-
Returns whether duplicate objects are allowed in the selection list.
- duplicatesAllowed() - Method in interface nxopen.cae.SelectFENodeList
-
Returns whether duplicate objects are allowed in the selection list.
- duplicatesAllowed() - Method in interface nxopen.cae.SelectMeshList
-
Returns whether duplicate objects are allowed in the selection list.
- duplicatesAllowed() - Method in interface nxopen.cam.SelectCAMFeatureList
-
Returns whether duplicate objects are allowed in the selection list.
- duplicatesAllowed() - Method in interface nxopen.drawings.SelectDraftingViewList
-
Returns whether duplicate objects are allowed in the selection list.
- duplicatesAllowed() - Method in interface nxopen.drawings.SelectDrawingViewList
-
Returns whether duplicate objects are allowed in the selection list.
- duplicatesAllowed() - Method in interface nxopen.facet.SelectFacetedBodyList
-
Returns whether duplicate objects are allowed in the selection list.
- duplicatesAllowed() - Method in interface nxopen.features.SelectBodyFeatureList
-
Returns whether duplicate objects are allowed in the selection list.
- duplicatesAllowed() - Method in interface nxopen.features.SelectDatumCsysList
-
Returns whether duplicate objects are allowed in the selection list.
- duplicatesAllowed() - Method in interface nxopen.features.SelectFeatureList
-
Returns whether duplicate objects are allowed in the selection list.
- duplicatesAllowed() - Method in interface nxopen.features.subdivision.SelectSubdivisionBodyList
-
Returns whether duplicate objects are allowed in the selection list.
- duplicatesAllowed() - Method in interface nxopen.layout2d.SelectComponentList
-
Returns whether duplicate objects are allowed in the selection list.
- duplicatesAllowed() - Method in interface nxopen.mechatronics.SelectCollisionSensorList
-
Returns whether duplicate objects are allowed in the selection list.
- duplicatesAllowed() - Method in interface nxopen.mechatronics.SelectHydraulicCylinderList
-
Returns whether duplicate objects are allowed in the selection list.
- duplicatesAllowed() - Method in interface nxopen.mechatronics.SelectLogicObjectList
-
Returns whether duplicate objects are allowed in the selection list.
- duplicatesAllowed() - Method in interface nxopen.mechatronics.SelectPneumaticCylinderList
-
Returns whether duplicate objects are allowed in the selection list.
- duplicatesAllowed() - Method in interface nxopen.SelectBodyList
-
Returns whether duplicate objects are allowed in the selection list.
- duplicatesAllowed() - Method in interface nxopen.SelectCoordinateSystemList
-
Returns whether duplicate objects are allowed in the selection list.
- duplicatesAllowed() - Method in interface nxopen.SelectCurveList
-
Returns whether duplicate objects are allowed in the selection list.
- duplicatesAllowed() - Method in interface nxopen.SelectDatumPlaneList
-
Returns whether duplicate objects are allowed in the selection list.
- duplicatesAllowed() - Method in interface nxopen.SelectDisplayableObjectList
-
Returns whether duplicate objects are allowed in the selection list.
- duplicatesAllowed() - Method in interface nxopen.SelectEdgeList
-
Returns whether duplicate objects are allowed in the selection list.
- duplicatesAllowed() - Method in interface nxopen.SelectExpressionList
-
Returns whether duplicate objects are allowed in the selection list.
- duplicatesAllowed() - Method in interface nxopen.SelectFaceList
-
Returns whether duplicate objects are allowed in the selection list.
- duplicatesAllowed() - Method in interface nxopen.SelectIBaseCurveList
-
Returns whether duplicate objects are allowed in the selection list.
- duplicatesAllowed() - Method in interface nxopen.SelectIBasePlaneList
-
Returns whether duplicate objects are allowed in the selection list.
- duplicatesAllowed() - Method in interface nxopen.SelectICurveList
-
Returns whether duplicate objects are allowed in the selection list.
- duplicatesAllowed() - Method in interface nxopen.SelectINXObjectList
-
Returns whether duplicate objects are allowed in the selection list.
- duplicatesAllowed() - Method in interface nxopen.SelectIParameterizedSurfaceList
-
Returns whether duplicate objects are allowed in the selection list.
- duplicatesAllowed() - Method in interface nxopen.SelectModelingViewList
-
Returns whether duplicate objects are allowed in the selection list.
- duplicatesAllowed() - Method in interface nxopen.SelectNXObjectList
-
Returns whether duplicate objects are allowed in the selection list.
- duplicatesAllowed() - Method in interface nxopen.SelectObjectList
-
Returns whether duplicate objects are allowed in the selection list.
- duplicatesAllowed() - Method in interface nxopen.SelectPartList
-
Returns whether duplicate objects are allowed in the selection list.
- duplicatesAllowed() - Method in interface nxopen.SelectPointList
-
Returns whether duplicate objects are allowed in the selection list.
- duplicatesAllowed() - Method in interface nxopen.SelectSplineList
-
Returns whether duplicate objects are allowed in the selection list.
- duplicatesAllowed() - Method in interface nxopen.SelectTaggedObjectList
-
Returns whether duplicate objects are allowed in the selection list.
- duplicatesAllowed() - Method in interface nxopen.SelectViewList
-
Returns whether duplicate objects are allowed in the selection list.
- DUR_EVENT_INFO - Static variable in class nxopen.uf.UFSf.ScenarioInfo
-
- DurabilityAxisSearch - Interface in nxopen.cae
-
- DurabilityAxisSearchCollection - Interface in nxopen.cae
-
Represents a collection of stress axes.
- DurabilityDamageEvaluationBuilder - Interface in nxopen.cae
-
Represents the builder for evaluating durability damage.
- DurabilityDamageEvaluationBuilder.BwiWeldClassEnum - Class in nxopen.cae
-
the BWi Weld Class Enum.
- DurabilityDamageEvaluationBuilder.CyclicStressStrainModelEnum - Class in nxopen.cae
-
the cyclic stress strain model.
- DurabilityDamageEvaluationBuilder.EquivalentStressMethodEnum - Class in nxopen.cae
-
the equivalent stress method.
- DurabilityDamageEvaluationBuilder.FatigueLifeCriterionEnum - Class in nxopen.cae
-
the fatigue life criterion.
- DurabilityDamageEvaluationBuilder.ProbabilityOptionEnum - Class in nxopen.cae
-
the Probability Option.
- DurabilityDataControlBuilder - Interface in nxopen.cae
-
Represents a builder class for the transient event data control.
- DurabilityDataControlBuilder.TimeExtentsEnum - Class in nxopen.cae
-
the time extents enum.
- DurabilityEvaluateFatigueHistoryBuilder - Interface in nxopen.cae
-
Represents the builder for evaluating fatigue histories.
- DurabilityEvaluateFatigueHistoryBuilder.FatigueHistoryDataTypeEnum - Class in nxopen.cae
-
Fatigue history data type: as per event, stress or strain
- DurabilityEvent - Interface in nxopen.cae
-
Represents a
DurabilityEvent
, which is an event of a durability
solution process.
- DurabilityEventBuilder - Interface in nxopen.cae
-
Represents the abstract builder class for all durability events.
- DurabilityEventCollection - Interface in nxopen.cae
-
Represents a collection of durability events.
- DurabilityEventFatigueSettingsBuilder - Interface in nxopen.cae
-
Represents a builder class for the event fatigue settings.
- DurabilityEventFatigueSettingsBuilder.BwiWeldClassEnum - Class in nxopen.cae
-
the BWi Weld Class Enum.
- DurabilityEventFatigueSettingsBuilder.CyclicStressStrainModelEnum - Class in nxopen.cae
-
the cyclic stress strain model enum.
- DurabilityEventFatigueSettingsBuilder.EquivalentStressMethodEnum - Class in nxopen.cae
-
the equivalent stress method enum.
- DurabilityEventFatigueSettingsBuilder.FatigueLifeCriterionEnum - Class in nxopen.cae
-
the fatigue life criterion enum.
- DurabilityEventFatigueSettingsBuilder.FatigueSafetyFactorMethodEnum - Class in nxopen.cae
-
the Fatigue Safety Factor Method Enum.
- DurabilityEventFatigueSettingsBuilder.FatigueSafetyFactorOutputEnum - Class in nxopen.cae
-
the Fatigue Safety Factor Output Enum.
- DurabilityEventFatigueSettingsBuilder.MaximumAlternatingStressEnum - Class in nxopen.cae
-
the Maximum Alternating Stress Enum.
- DurabilityEventFatigueSettingsBuilder.OrthotropicFatigueCriterionEnum - Class in nxopen.cae
-
the Orthotropic Fatigue Criterion.
- DurabilityEventFatigueSettingsBuilder.OrthotropicMeanStressEnum - Class in nxopen.cae
-
the Orthotropic Mean Stress.
- DurabilityEventFatigueSettingsBuilder.ProbabilityOptionEnum - Class in nxopen.cae
-
the Probability Option.
- DurabilityEventOverridesBuilder - Interface in nxopen.cae
-
Represents a builder class for Event Overrides.
- DurabilityEventOverridesBuilder.UseElementsEnum - Class in nxopen.cae
-
the use elements enum.
- DurabilityEventSolverBuilder - Interface in nxopen.cae
-
Represents the builder for solving the durability event.
- DurabilityEventSolverBuilder.SubmitOptionsEnum - Class in nxopen.cae
-
the submit options enum.
- DurabilityEventStrengthSettingsBuilder - Interface in nxopen.cae
-
Represents a builder class for the event strength settings.
- DurabilityEventStrengthSettingsBuilder.OrthotropicFailureCriterionEnum - Class in nxopen.cae
-
the orthotropic Failure criterion enum.
- DurabilityEventStrengthSettingsBuilder.StressCriterionEnum - Class in nxopen.cae
-
the stress criterion enum.
- DurabilityEventStrengthSettingsBuilder.StressTypeEnum - Class in nxopen.cae
-
the stress type enum.
- DurabilityExcitation - Interface in nxopen.cae
-
- DurabilityExcitationBuilder - Interface in nxopen.cae
-
Represents the abstract builder class for all durability excitations.
- DurabilityExcitationCollection - Interface in nxopen.cae
-
Represents a collection of durability excitations.
- DurabilityFatigue - Interface in nxopen.cae
-
- DurabilityFatigueCollection - Interface in nxopen.cae
-
Represents a collection of event fatigue settings.
- DurabilityFunctionExcitation - Interface in nxopen.cae
-
- DurabilityFunctionExcitationBuilder - Interface in nxopen.cae
-
- DurabilityLoadPattern - Interface in nxopen.cae
-
- DurabilityLoadPatternBuilder - Interface in nxopen.cae
-
- DurabilityLoadPatternBuilder.PatternTypeEnum - Class in nxopen.cae
-
the pattern type.
- DurabilityManager - Interface in nxopen.cae
-
Represents the durability manager that contains all durability objects.
- durabilityManager() - Method in interface nxopen.cae.SimSimulation
-
Returns the durability manager belonging to this sim part .
- DurabilityMetaSolution - Interface in nxopen.cae
-
- DurabilityMetaSolutionBuilder - Interface in nxopen.cae
-
- DurabilityMetaSolutionCollection - Interface in nxopen.cae
-
Represents a collection of correl meta solution.
- DurabilityRandomEvent - Interface in nxopen.cae
-
- DurabilityRandomEventBuilder - Interface in nxopen.cae
-
Represents the builder for the random durability event.
- DurabilityRandomFatigue - Interface in nxopen.cae
-
- DurabilityRandomFatigueBuilder - Interface in nxopen.cae
-
Represents a builder class for the event fatigue settings.
- DurabilityRandomFatigueBuilder.RandomFatigueMethodEnum - Class in nxopen.cae
-
the random method.
- DurabilityRandomFatigueCollection - Interface in nxopen.cae
-
Represents a collection of random fatigue.
- DurabilityResultPath - Interface in nxopen.cae
-
- DurabilityResultPathBuilder - Interface in nxopen.cae
-
- DurabilityResultsReportBuilder - Interface in nxopen.cae
-
Represents the builder for reporting the durability results.
- DurabilityResultsReportBuilder.UseEventsEnum - Class in nxopen.cae
-
the event report options enum.
- DurabilitySolveOptions - Interface in nxopen.cae
-
- DurabilitySolveOptionsCollection - Interface in nxopen.cae
-
Represents a collection of correl meta solution.
- DurabilitySolverBuilder - Interface in nxopen.cae
-
Represents the builder for solving the durability solution process.
- DurabilitySolverBuilder.ActiveEventSolveOptionsEnum - Class in nxopen.cae
-
the active event solve options enum.
- DurabilitySolverBuilder.SubmitOptionsEnum - Class in nxopen.cae
-
the submit options enum.
- DurabilityStaticEvent - Interface in nxopen.cae
-
- DurabilityStaticEventBuilder - Interface in nxopen.cae
-
Represents the builder for the static durability event.
- DurabilityStaticEventBuilder.ExcitationTypeEnum - Class in nxopen.cae
-
the static excitation type.
- DurabilityStrainGageAnalyzerBuilder - Interface in nxopen.cae
-
Represents the builder for analyzing strain gage data.
- DurabilityStrainGageAnalyzerBuilder.AxisDirectionSearchMethodEnum - Class in nxopen.cae
-
the axis direction search enum.
- DurabilityStrainGageAnalyzerBuilder.CriticalPlaneOptionEnum - Class in nxopen.cae
-
the critical plane option enum.
- DurabilityStrainGageAnalyzerBuilder.GageConstructionEnum - Class in nxopen.cae
-
the gage construction enum.
- DurabilityStrainGageAnalyzerBuilder.GageSourceEnum - Class in nxopen.cae
-
the gage source enum.
- DurabilityStrainGageAnalyzerBuilder.GageTypeEnum - Class in nxopen.cae
-
the gage type enum.
- DurabilityStrength - Interface in nxopen.cae
-
- DurabilityStrengthCollection - Interface in nxopen.cae
-
Represents a collection of event strength settings.
- DurabilityStressAxesBuilder - Interface in nxopen.cae
-
Represents a builder class for the event fatigue settings.
- DurabilityStressAxesBuilder.BeamStressEnum - Class in nxopen.cae
-
the Beam Stress Enum
- DurabilityStressAxesBuilder.ElementFaceStressAxisEnum - Class in nxopen.cae
-
the Element Face Stress Axis Enum.
- DurabilityStressAxesBuilder.NodeElementOptionEnum - Class in nxopen.cae
-
the Node Element Option Enum.
- DurabilityStressAxesBuilder.ShellRegionEnum - Class in nxopen.cae
-
the Shell Region Enum.
- DurabilityStressAxesBuilder.StressAxisDirectionSearchMethodEnum - Class in nxopen.cae
-
the Stress Axis Direction Method Search Enum.
- DurabilityStressAxesBuilder.StressAxisMethodEnum - Class in nxopen.cae
-
the Stress Axis Method Enum.
- DurabilityTransientEvent - Interface in nxopen.cae
-
- DurabilityTransientEventBuilder - Interface in nxopen.cae
-
Represents the builder for the transient durability event.
- duration() - Method in interface nxopen.cae.DurSpecialistLoadLengthBuilder
-
Returns the duration
License requirements: None.
- duration() - Method in interface nxopen.cae.responsesimulation.RSEventAttributes
-
Returns the time duration in second for transient event
License requirements: nx_response_anlys ("NX Response Analysis")
.
- duration() - Method in interface nxopen.mechatronics.GanttOperationBuilder
-
Returns the operation duration
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- durationOption() - Method in interface nxopen.cae.responsesimulation.RSEventAttributes
-
Returns the time duration optionin option for transient event
License requirements: None.
- durations - Variable in class nxopen.uf.UFAssem.AskStepElementDurationsData
-
- durationType() - Method in interface nxopen.cae.DurSpecialistLoadLengthBuilder
-
Returns the duration type.
- dursolAddLoadNx(Tag, Tag) - Method in interface nxopen.uf.UFSf
-
- dursolAskLoadCountNx(Tag) - Method in interface nxopen.uf.UFSf
-
- dursolAskLoadNx(Tag, int) - Method in interface nxopen.uf.UFSf
-
- dursolLocateAllMembersNx(Tag) - Method in interface nxopen.uf.UFSf
-
- DursolLocateAllMembersNxData() - Constructor for class nxopen.uf.UFSf.DursolLocateAllMembersNxData
-
- dursolName - Variable in class nxopen.uf.UFSf.AskDursolNxData
-
- dursolRemoveLoadNx(Tag, Tag) - Method in interface nxopen.uf.UFSf
-
- DurSpecialistAnalysisType - Interface in nxopen.cae
-
TODO: Add documentation
.
- DurSpecialistAnalysisTypeBuilder - Interface in nxopen.cae
-
- DurSpecialistAnalysisTypeCollection - Interface in nxopen.cae
-
Represents a collection of DurSpecialist AnalysisType
To obtain an instance of this class, refer to
DurSpecialistManager
Created in NX12.0.0
NX_REMOVE_FROM_JAVA_API
- DurSpecialistBlockLoadEvent - Interface in nxopen.cae
-
- DurSpecialistBlockLoadEventBuilder - Interface in nxopen.cae
-
- DurSpecialistBlockLoadEventBuilder.PatternType - Class in nxopen.cae
-
Represents the pattern of the block load
- DurSpecialistDataSources - Interface in nxopen.cae
-
- DurSpecialistDataSources.UnitSystem - Class in nxopen.cae
-
the unit system
- DurSpecialistEvent - Interface in nxopen.cae
-
- DurSpecialistEvent.EventType - Class in nxopen.cae
-
Represents the event type
- DurSpecialistEvent.SelectionCriterionType - Class in nxopen.cae
-
unused
- DurSpecialistEvent.UpdateCriterionType - Class in nxopen.cae
-
Represents the update criterion type for link update
- DurSpecialistLoadLength - Interface in nxopen.cae
-
TODO: Add documentation
.
- DurSpecialistLoadLengthBuilder - Interface in nxopen.cae
-
- DurSpecialistLoadLengthBuilder.Definition - Class in nxopen.cae
-
the Definition type
- DurSpecialistLoadProvider - Interface in nxopen.cae
-
- DurSpecialistLoadProviderBuilder - Interface in nxopen.cae
-
- DurSpecialistLoadProviderCollection - Interface in nxopen.cae
-
- DurSpecialistLocalDefinition - Interface in nxopen.cae
-
- DurSpecialistLocalDefinitionBuilder - Interface in nxopen.cae
-
- DurSpecialistLocalDefinitionBuilder.LocationType - Class in nxopen.cae
-
Represents location type
- DurSpecialistLocalDefinitionByGroupBuilder - Interface in nxopen.cae
-
- DurSpecialistLocalDefinitionByGroupBuilder.LocalDefinitionType - Class in nxopen.cae
-
Represents the kind of local definition to be created
- DurSpecialistLocalDefinitionCollection - Interface in nxopen.cae
-
Represents a collection of DurSpecialist LocalDefinition.
- DurSpecialistManager - Interface in nxopen.cae
-
Represents the durability specialist manager that contains all durability specialist objects.
- durSpecialistManager() - Method in interface nxopen.cae.SimSimulation
-
Returns the durability specialist manager belonging to this sim part .
- DurSpecialistParameterObject - Interface in nxopen.cae
-
TODO: Add documentation
.
- DurSpecialistParameterObjectCollection - Interface in nxopen.cae
-
all CAE.DurSpecialistParameterObject from this simulation
To obtain an instance of this class, refer to
DurSpecialistManager
Created in NX12.0.0
NX_REMOVE_FROM_JAVA_API
- DurSpecialistSimulationObject - Interface in nxopen.cae
-
- DurSpecialistSimulationObjectTable - Interface in nxopen.cae
-
- DurSpecialistSolution - Interface in nxopen.cae
-
- DurSpecialistSolutionBuilder - Interface in nxopen.cae
-
- DurSpecialistSolutionBuilder.MaterialSourceType - Class in nxopen.cae
-
Represents the material source type
- DurSpecialistSolutionCollection - Interface in nxopen.cae
-
Represents a collection of DurSpecialist Specialist Solution.
- DurSpecialistSuperpositionEvent - Interface in nxopen.cae
-
- DurSpecialistSuperpositionEventBuilder - Interface in nxopen.cae
-
- DurSpecialistSuperpositionEventBuilder.FindInType - Class in nxopen.cae
-
Represents the find in type
- DurSpecialistSuperpositionEventBuilder.MatchByType - Class in nxopen.cae
-
Represents the match by type for automatic matching
- DurSpecialistSuperpositionEventBuilder.MatchingType - Class in nxopen.cae
-
Represents the matching type
- DurSpecialistSuperpositionEventBuilder.MatchUsingType - Class in nxopen.cae
-
Represents the name matching algorithm
- DurSpecialistSuperpositionEventBuilder.RangeType - Class in nxopen.cae
-
Represents the interval range type
- DurSpecialistSuperpositionEventBuilder.StaticLoadData - Class in nxopen.cae
-
- dVecDir - Variable in class nxopen.uf.UFModl.SmslotData
-
- DvToMvMapping - Interface in nxopen.features.shipdesign
-
Represents a plate feature
To create or edit an instance of this class, use
DvToMvMappingBuilder
Created in NX8.5.0
- DvToMvMappingBuilder - Interface in nxopen.features.shipdesign
-
- dwell() - Method in interface nxopen.cam.Cycle
-
Returns the dwell type
License requirements: None.
- dwell() - Method in interface nxopen.cam.CycleDwell
-
Returns the dwell value
License requirements: cam_base ("CAM BASE")
.
- dwell() - Method in interface nxopen.cam.TurnRoughFinishLocalReturnBuilder
-
Returns the Dwell Time or Revolutions
License requirements: None.
- DWELL_REVOLUTIONS - Static variable in class nxopen.uf.UFPath.DwellUnit
-
- DWELL_SECONDS - Static variable in class nxopen.uf.UFPath.DwellUnit
-
- DWELL_UNIT_LAST_ELEMENT - Static variable in class nxopen.uf.UFPath.DwellUnit
-
- dwellAtDepth() - Method in interface nxopen.cam.Cycle
-
Returns the dwell at depth
License requirements: None.
- dwellAtFinalDepth() - Method in interface nxopen.cam.Cycle
-
Returns the dwell at final depth
License requirements: None.
- dwellAtStartPoint() - Method in interface nxopen.cam.Cycle
-
Returns the dwell at start point of phase
License requirements: None.
- dwellBeforeCut() - Method in interface nxopen.cam.Cycle
-
Returns the dwell before cut
License requirements: None.
- dwellBeforeEngage() - Method in interface nxopen.cam.Cycle
-
Returns the dwell before engage
License requirements: None.
- dwellBeforeRetract() - Method in interface nxopen.cam.Cycle
-
Returns the dwell before retract
License requirements: None.
- dwellFinal() - Method in interface nxopen.cam.Cycle
-
Returns the dwell final type
License requirements: None.
- dwellFinalValue() - Method in interface nxopen.cam.Cycle
-
Returns the dwell final value
License requirements: None.
- dwellMode() - Method in interface nxopen.cam.CycleDwell
-
Returns the dwell type
License requirements: cam_base ("CAM BASE")
.
- dwellStart() - Method in interface nxopen.cam.Cycle
-
Returns the dwell start type
License requirements: None.
- dwellStartValue() - Method in interface nxopen.cam.Cycle
-
Returns the dwell start value
License requirements: None.
- dwellType() - Method in interface nxopen.cam.CenterlineDrillTurningBuilder
-
Returns the dwell type
License requirements: None.
- dwellUnit() - Method in interface nxopen.cam.TurnRoughFinishLocalReturnBuilder
-
Returns the Dwell Unit type
License requirements: None.
- dwellValue() - Method in interface nxopen.cam.CenterlineDrillTurningBuilder
-
Returns the dwell value
License requirements: None.
- dwellValue() - Method in interface nxopen.cam.Cycle
-
Returns the dwell value
License requirements: None.
- DWG - Static variable in class nxopen.DxfdwgCreator.OutputFileTypeOption
-
export data to DWG format
- DWG_LINE - Static variable in class nxopen.uf.UFDrf.AssocLineType
-
- DWG_POS - Static variable in class nxopen.uf.UFDrf.AssocType
-
- dwidth - Variable in class nxopen.mfg.am.BuildTray.DimensionsData
-
- DWORD - Static variable in class nxopen.ame.ConstantType
-
- DWORD - Static variable in class nxopen.ame.PlcDataType
-
- DXF - Static variable in class nxopen.DxfdwgCreator.OutputFileTypeOption
-
export data to DXF format
- DXF - Static variable in class nxopen.features.sheetmetal.ExportFlatPatternBuilder.FileType
-
DXF Export
- DxfdwgCreator - Interface in nxopen
-
- DxfdwgCreator.AutoCADRevisionOptions - Class in nxopen
-
AutoCad Revision option
- DxfdwgCreator.ExportAsOption - Class in nxopen
-
Exprot As option
- DxfdwgCreator.ExportDataOption - Class in nxopen
-
Exprot Data option
- DxfdwgCreator.ExportFacesAsOptions - Class in nxopen
-
Export Faces As option
- DxfdwgCreator.ExportFromOption - Class in nxopen
-
Exprot From option
- DxfdwgCreator.ExportScaleOptions - Class in nxopen
-
Export Scale option
- DxfdwgCreator.ExportSplinesAsOptions - Class in nxopen
-
Export Faces As option
- DxfdwgCreator.OutputFileTypeOption - Class in nxopen
-
Output File Type option
- DxfdwgCreator.OutputToOption - Class in nxopen
-
Output To Option
- DxfdwgCreator.WidthfactorMethodOptions - Class in nxopen
-
AutoCad widthfactor calculation options
- DxfdwgImporter - Interface in nxopen
-
- DxfdwgImporter.AspectRatioOptions - Class in nxopen
-
NX Aspect ratio calculation options
- DxfdwgImporter.ConvLayoutsAs - Class in nxopen
-
Convert latouts option
- DxfdwgImporter.FacetImportAs - Class in nxopen
-
DXFDWG Facet Import options
- DxfdwgImporter.ImportBlocksAs - Class in nxopen
-
Import Blocks as option option
- DxfdwgImporter.ImportCurvesAs - Class in nxopen
-
Import curves as option
- DxfdwgImporter.ImportDimensionsAs - Class in nxopen
-
Import Dimensions as option option
- DxfdwgImporter.ImportPolylinesAs - Class in nxopen
-
Import Polylines as option
- DxfdwgImporter.ImportToEnum - Class in nxopen
-
Import To option
- DxfdwgImporter.ProcessingOrderAs - Class in nxopen
-
Processing Oder of non numeric layers
- DxfdwgImporter.SendLayoutsAs - Class in nxopen
-
Send Layouts data to option
- DxfdwgImporter.SendModelDataAs - Class in nxopen
-
Send Model data to option
- DxfdwgImporter.UnitsEnum - Class in nxopen
-
Import To option
- DxfdwgImporter.WorkflowAs - Class in nxopen
-
DXFDWG Import Workflow options
- dxfRevision() - Method in interface nxopen.features.sheetmetal.ExportFlatPatternBuilder
-
Returns the dxf revision.
- dxIncrement() - Method in interface nxopen.tooling.StandardPartPositionBuilder
-
Returns the increment in X direction when a standard part is dragged.
- dyIncrement() - Method in interface nxopen.tooling.StandardPartPositionBuilder
-
Returns the increment in Y direction when a standard part is dragged.
- DYNAMIC - Static variable in class nxopen.cam.LaserControlPoint.HeadOrientTypes
-
Dynamic
- DYNAMIC - Static variable in class nxopen.cam.LaserHeadOrientation.Types
-
Dynamic
- DYNAMIC - Static variable in class nxopen.cam.ToolAxisFixed.Types
-
Dynamic
- DYNAMIC - Static variable in class nxopen.display.NonProportionalZoom.MethodType
-
Defines a line to define aspect ratio of non-proportional zoom.
- DYNAMIC - Static variable in class nxopen.drawings.SectionViewBuilder.SectionViewModeType
-
- DYNAMIC - Static variable in class nxopen.geometricanalysis.GeometricProperties.OutputType
-
Properties of an entity are displayed first on the dialog
itself on mouse over.
- DYNAMIC - Static variable in class nxopen.geometricutilities.ModlMotion.Options
-
Move by Dynamic
- DYNAMIC - Static variable in class nxopen.motion.MotionSolutionBuilder.AnalysisTypes
-
Dynamic or Kinematic analysis
- DYNAMIC_DRAG - Static variable in class nxopen.HumanData.InverseKinematicsType
-
Indicate dynamic drag type of inverse kinematics
- DYNAMIC_FREQUENCY - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
-
Eigenfrequency from modal analysis
- DYNAMIC_FREQUENCY_KRESSISSEL - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
-
Eigenfrequency calculated with Kreisselmaier-Steinhauser formula
- DYNAMIC_MEMORY_EXHAUSTED - Static variable in class nxopen.uf.UFConstants
-
- DYNAMIC_PLANE - Static variable in class nxopen.features.subdivision.SubdivisionProjectCageBuilder.TargetTypes
-
- DYNAMIC_PROPERTY - Static variable in class nxopen.motion.TextBasedElementBuilder.TypeChoices
-
- DYNAMIC_RESPONSE - Static variable in class nxopen.cae.responsesimulation.RSEvent.ResultFileType
-
Result file to contain dynamic response evaluation results, which extension is ".rs2"
- DYNAMIC_STIFFNESS - Static variable in class nxopen.cae.connections.ModelizationResultType
-
Dynamic Stiffness
- DYNAMIC_STRUCTURAL_DAMPING - Static variable in class nxopen.cae.connections.ModelizationResultType
-
Dynamic StructuralDamping
- DYNAMIC_VISCOSITY - Static variable in class nxopen.cae.Result.Quantity
-
- DYNAMIC_VISCOSITY - Static variable in class nxopen.cae.XyFunctionMeasure
-
Dynamic Viscosity
- DYNAMIC_VISCOSITY_GCM_SEC - Static variable in class nxopen.cae.XyFunctionUnit
-
Dynamic Viscosity Unit: grams per centimeter per second
- DYNAMIC_VISCOSITY_KG_MM_SEC - Static variable in class nxopen.cae.XyFunctionUnit
-
Dynamic Viscosity Unit: kilograms per millimeter per second
- DYNAMIC_VISCOSITY_KG_MSEC - Static variable in class nxopen.cae.XyFunctionUnit
-
Dynamic Viscosity Unit: kilograms per meter per second
- DYNAMIC_VISCOSITY_LBF_SEC_FT2 - Static variable in class nxopen.cae.XyFunctionUnit
-
Dynamic Viscosity Unit: pound-force seconds per square foot
- DYNAMIC_VISCOSITY_LBF_SEC_IN2 - Static variable in class nxopen.cae.XyFunctionUnit
-
Dynamic Viscosity Unit: pound-force seconds per square inch
- DYNAMIC_VISCOSITY_LBM_FT_SEC - Static variable in class nxopen.cae.XyFunctionUnit
-
Dynamic Viscosity Unit: pound-masses per foot per second
- DYNAMIC_VISCOSITY_LBM_IN_SEC - Static variable in class nxopen.cae.XyFunctionUnit
-
Dynamic Viscosity Unit: pound-masses per inch per second
- DYNAMIC_VISCOSITY_MN_SEC_MM2 - Static variable in class nxopen.cae.XyFunctionUnit
-
Dynamic Viscosity Unit: millinewton second per millimeter squared
- DYNAMIC_VISCOSITY_NSEC_CM2 - Static variable in class nxopen.cae.XyFunctionUnit
-
Dynamic Viscosity Unit: newton second per centiimeter squared
- DYNAMIC_VISCOSITY_NSEC_M2 - Static variable in class nxopen.cae.XyFunctionUnit
-
Dynamic Viscosity Unit: newton second per meter squared
- DYNAMIC_VISCOSITY_NSEC_MM2 - Static variable in class nxopen.cae.XyFunctionUnit
-
Dynamic Viscosity Unit: newton second per millimeter squared
- DYNAMIC_VISCOUS_DAMPING - Static variable in class nxopen.cae.connections.ModelizationResultType
-
Dynamic ViscousDamping
- dynamicAlignment() - Method in interface nxopen.preferences.SessionDrafting
-
Returns the dynamic alignment flag.
- dynamicAlignmentInGlobalSelection() - Method in interface nxopen.annotations.CommonWorkflowBuilder
-
Returns the dynamic alignment in global selection determines whether drafting annotations and dimensions will automatically
align or not when moving them in Global Selection.
- dynamicCoefficient() - Method in interface nxopen.motion.BodyContactLms
-
Returns the dynamic coefficient
License requirements: None.
- dynamicCoefficient() - Method in interface nxopen.motion.BodyContactSphereToCAD
-
Returns the dynamic coefficient
License requirements: None.
- dynamicCoefficientExpression() - Method in interface nxopen.motion.BodyContactAdams
-
Returns the dynamic coefficient
License requirements: None.
- dynamicCoefficientExpression() - Method in interface nxopen.motion.BodyContactRecurdyn
-
Returns the dynamic coefficient expression
License requirements: None.
- dynamicCoefficientExpression() - Method in interface nxopen.motion.CurveContactAdams
-
Returns the dynamic coefficient expression
License requirements: None.
- dynamicCoefficientExpression() - Method in interface nxopen.motion.CurveContactRecurdyn
-
Returns the dynamic coefficient expression
License requirements: None.
- dynamicConstraintDisplay() - Method in interface nxopen.preferences.SessionSketch
-
Returns the setting that controls whether or not constraint symbols are displayed if the associated geometry is very small.
- dynamicCsysOrientation() - Method in interface nxopen.tooling.ReusableObjectPasteBuilder
-
Returns the orientation of dynamic csys
License requirements: None.
- dynamicCsysOrientation() - Method in interface nxopen.tooling.ReusePositioningObjectBuilder
-
Returns the orientation of dynamic csys
License requirements: None.
- dynamicCsysOrigin() - Method in interface nxopen.tooling.ReusableObjectPasteBuilder
-
Returns the origin of dynamic csys
License requirements: None.
- dynamicCsysOrigin() - Method in interface nxopen.tooling.ReusePositioningObjectBuilder
-
Returns the origin of dynamic csys
License requirements: None.
- DynamicCurb - Interface in nxopen.features.vehicledesign
-
Represents a dynamic curb feature
To create or edit an instance of this class, use
DynamicCurbBuilder
Created in NX8.5.0
- DynamicCurbBuilder - Interface in nxopen.features.vehicledesign
-
- DynamicCurbBuilder.MethodType - Class in nxopen.features.vehicledesign
-
Represents the type of inner line to create dynamic curb.
- DynamicCurbBuilder.PositionType - Class in nxopen.features.vehicledesign
-
Represents the dynamic curb positions.
- DynamicCurbBuilder.RequirementsControlType - Class in nxopen.features.vehicledesign
-
Represents the requirements control types to define the dynamic curb.
- DynamicCurbBuilder.VisualizationType - Class in nxopen.features.vehicledesign
-
Represents the visualization types of the output.
- DynamicCurbBuilder.WheelType - Class in nxopen.features.vehicledesign
-
Represents the type of the wheel size option for dynamic curb.
- DynamicCutElbowBehaviorBuilder - Interface in nxopen.mechanicalrouting
-
- dynamicErrorToleranceExpression() - Method in interface nxopen.motion.RecurdynSolverProperty
-
Returns the dynamic error tolerance expression
License requirements: None.
- DynamicEvaluationOutputSettings - Interface in nxopen.cae.responsesimulation
-
Represents the output setting for dynamic response evaluation .
- dynamicEvent() - Method in interface nxopen.cae.responsesimulation.ExcitationBuilder
-
Returns the parent dynamic event object
License requirements: nx_response_anlys ("NX Response Analysis")
.
- dynamicEventName() - Method in interface nxopen.cae.LaminateDynamicEventBuilder
-
Returns the event name
License requirements: None.
- dynamicEvents() - Method in interface nxopen.cae.LaminateDynamicSim
-
Returns the dynamic event collection belonging to this dynamic sim .
- dynamicFriction() - Method in interface nxopen.mechatronics.CollisionMaterialBuilder
-
Returns the dynamic friction.
- dynamicFriction() - Method in interface nxopen.mechatronics.PreferencesBuilder
-
- dynamicFriction - Variable in class nxopen.uf.UFMotion.ContactParameters
-
- dynamicFrictionExpression() - Method in interface nxopen.mechatronics.PreferencesBuilder
-
Returns the Dynamic Friction Expression
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- dynamicInitialStepSizeExpression() - Method in interface nxopen.motion.RecurdynSolverProperty
-
Returns the dynamic initial step size expression
License requirements: None.
- dynamicInitialVelocityMethod() - Method in interface nxopen.motion.LmsSolverProperty
-
Returns the dynamic initial velocity method
License requirements: None.
- dynamicIntegrationTolerance() - Method in interface nxopen.motion.LmsSolverProperty
-
Returns the dynamic integration tolerance
License requirements: None.
- dynamicIRayPlusCaustics() - Method in interface nxopen.display.IRayPlusStudioEditorBuilder
-
Returns the Ray Traced Studio dynamic antialiasing quality when dynamic interaction stops
License requirements: studio_render ("UG STUDIO RENDER")
.
- dynamicIRayPlusStudioRenderMode() - Method in interface nxopen.display.IRayPlusStudioEditorBuilder
-
Returns the Ray Traced Studio dynamic display rendering mode
License requirements: studio_render ("UG STUDIO RENDER")
.
- dynamicIRayPlusStudioTime() - Method in interface nxopen.display.IRayPlusStudioEditorBuilder
-
Returns the Ray Traced Studio dynamic display time-based rendering mode timer (read only)
License requirements: studio_render ("UG STUDIO RENDER")
.
- dynamicLabel() - Method in interface nxopen.geometricanalysis.CurveContinuityBuilder
-
Returns the location for dynamic label
License requirements: None.
- dynamicLabel() - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder
-
Returns the constraint manager
License requirements: None.
- dynamicLabel() - Method in interface nxopen.geometricanalysis.SurfaceContinuityAnalysisBuilder
-
Returns the constraint manager
License requirements: None.
- dynamicMaxIntegrationStep() - Method in interface nxopen.motion.LmsSolverProperty
-
Returns the dynamic max interation step
License requirements: None.
- dynamicMaxKinIteration() - Method in interface nxopen.motion.RecurdynSolverProperty
-
Returns the Maximum kinematic iteration
License requirements: None.
- dynamicMaxStepSizeExpression() - Method in interface nxopen.motion.RecurdynSolverProperty
-
Returns the dynamic max step size expression
License requirements: None.
- dynamicNumericalDampingExpression() - Method in interface nxopen.motion.RecurdynSolverProperty
-
Returns the dynamic numerical damping expression
License requirements: None.
- DynamicObjectTable - Interface in nxopen.mechatronics
-
Represents the DynamicObjectTable class
DynamicObjectTable contains dynamic object instances.
- DynamicObjectTableBuilder - Interface in nxopen.mechatronics
-
- DynamicObjectTableBuilder.Instance - Class in nxopen.mechatronics
-
Represents Instance definition structure.
- DynamicObjectTableCollection - Interface in nxopen.mechatronics
-
Represents a collection of DynamicObjectTable.
- dynamicObjectTables() - Method in interface nxopen.mechatronics.PhysicsManager
-
- dynamicProjection() - Method in interface nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder
-
Returns the dynamic projection
License requirements: None.
- dynamicProjection() - Method in interface nxopen.geometricanalysis.SurfaceIntersectionBuilder
-
Returns the dynamic projection
License requirements: None.
- dynamicRayTracedStudioTilingQuality() - Method in interface nxopen.display.RayTracedStudioEditorBuilder
-
Returns the Ray Traced Studio tiling quality during interactive dynamic display
License requirements: None.
- DynamicResultEvaluationSetting - Interface in nxopen.cae.responsesimulation
-
Represents the abstract class of evaluation setting for all dynamic results evaluations.
- DynamicResultEvaluationSettingBuilder - Interface in nxopen.cae.responsesimulation
-
Represents the abstract builder class of evaluation setting for all dynamic results evaluations.
- DYNAMICS - Static variable in class nxopen.motion.MotionEnvironment.Analysis
-
Dynamics analysis type
- dynamics() - Method in interface nxopen.motion.TirePropertyTnoBuilder
-
Returns the dynamics type.
- DynamicSection - Interface in nxopen.display
-
Represents a dynamic section
To create or edit an instance of this class, use
DynamicSectionBuilder
Created in NX6.0.0
- DynamicSectionBuilder - Interface in nxopen.display
-
Represents a Dynamic Section Builder used for creating sections.
- DynamicSectionBuilder.ActivePlaneData - Class in nxopen.display
-
- DynamicSectionBuilder.AllPlanesGeometryData - Class in nxopen.display
-
- DynamicSectionBuilder.BoundingBoxData - Class in nxopen.display
-
- DynamicSectionBuilder.LoadAllIntersectingData - Class in nxopen.display
-
- DynamicSectionBuilder.OffsetLimitsData - Class in nxopen.display
-
- DynamicSectionBuilder.PlaneGeometryData - Class in nxopen.display
-
- DynamicSectionCollection - Interface in nxopen.display
-
Represents a collection of dynamic section objects
To obtain an instance of this class, refer to
BasePart
Created in NX6.0.0
- DynamicSectionCut - Interface in nxopen.display
-
Represents a dynamic section-cut generated by sectioning an object
such as a
IBody
or a
Component
.
- dynamicSections() - Method in interface nxopen.BasePart
-
Returns the Display.DynamicSectionCollection instance belonging to this part
Created in NX6.0.0
- DynamicSectionTypes - Interface in nxopen.display
-
Represents a enumerations used by Dynamic Section Builder.
- DynamicSectionTypes.ActivePlane - Class in nxopen.display
-
Specifies active clip plane in the active plane pair.
- DynamicSectionTypes.Axis - Class in nxopen.display
-
Specifies axis.
- DynamicSectionTypes.CapColorOption - Class in nxopen.display
-
Specifies cap color type to be used for the cap.
- DynamicSectionTypes.Clip - Class in nxopen.display
-
Specifies clipping type.
- DynamicSectionTypes.CoordinateSystem - Class in nxopen.display
-
Specifies the coordinate system used for creating
principal planes i.e.
- DynamicSectionTypes.CurveColorOption - Class in nxopen.display
-
Specifies the color of the curves created by the
section plane.
- DynamicSectionTypes.Type - Class in nxopen.display
-
Specifies different type of sectioning.
- dynamicSims() - Method in interface nxopen.cae.LaminateManager
-
Returns the dynamic sim collection belonging to this sim part .
- dynamicSolutionTolerance() - Method in interface nxopen.motion.LmsSolverProperty
-
Returns the dynamic solution tolerance
License requirements: None.
- dynamicSolverAccelerationMethod() - Method in interface nxopen.motion.LmsSolverProperty
-
Returns the dynamic solver acceleration method
License requirements: None.
- dynamicUpdate() - Method in interface nxopen.preferences.SessionModeling
-
Returns the dynamic update.