- OB - Static variable in class nxopen.ame.PlcDataType
-
- OB_ANY - Static variable in class nxopen.ame.PlcDataType
-
- OB_ATT - Static variable in class nxopen.ame.PlcDataType
-
- OB_CYCLIC - Static variable in class nxopen.ame.PlcDataType
-
- OB_DELAY - Static variable in class nxopen.ame.PlcDataType
-
- OB_DIAG - Static variable in class nxopen.ame.PlcDataType
-
- OB_HWINT - Static variable in class nxopen.ame.PlcDataType
-
- OB_PCYCLE - Static variable in class nxopen.ame.PlcDataType
-
- OB_STARTUP - Static variable in class nxopen.ame.PlcDataType
-
- OB_TIMEERROR - Static variable in class nxopen.ame.PlcDataType
-
- OB_TOD - Static variable in class nxopen.ame.PlcDataType
-
- obj - Variable in class nxopen.cae.ElemEdgefaceObject
-
the object
- obj - Variable in class nxopen.cae.SetObject
-
the object
- obj() - Method in interface nxopen.UFSession
-
- OBJECT - Static variable in class nxopen.ame.CallMethodRuleBuilder.CreationType
-
- OBJECT - Static variable in class nxopen.ame.OperandRuleBuilder.CreationType
-
- object - Variable in class nxopen.annotations.AssociativeText.ObjectAttributeData
-
the object
- OBJECT - Static variable in class nxopen.assemblies.ClearanceAnalysisBuilder.ZoneType
-
- OBJECT - Static variable in class nxopen.AttributePropertiesBaseBuilder.ObjectOptions
-
Deprecated.
Apply attribute to the object in the select object list
- object() - Method in interface nxopen.display.DecalBuilder
-
Returns the object(face, body and facetted body) to apply the decal to
License requirements: None.
- OBJECT - Static variable in class nxopen.drawings.AssociativeAngleBuilder.ObjectType
-
indicates the selected type is an object
- OBJECT - Static variable in class nxopen.features.BridgeCurveBuilder.EndObjectTypes
-
Deprecated.
allowed end object type except a vector object
- OBJECT - Static variable in class nxopen.features.BridgeCurveBuilderEx.EndObjectTypes
-
A point or face
- OBJECT - Static variable in class nxopen.features.BridgeCurveBuilderEx.StartObjectTypes
-
A point or face
- OBJECT - Static variable in class nxopen.features.FitSurfaceBuilder.TargetType
-
This option will select the entire object
- OBJECT - Static variable in class nxopen.features.MatchedReferenceBuilder.Types
-
general geometry such as the target body and the tool body for copying unite feature
- OBJECT - Static variable in class nxopen.features.subdivision.SubdivisionProjectCageBuilder.TargetTypes
-
- OBJECT - Static variable in class nxopen.geometricutilities.SelectDividingObjectBuilder.ToolType
-
- OBJECT - Static variable in class nxopen.MeasureAngleBuilder.ObjectType
-
- object() - Method in interface nxopen.motion.GraphBuilder
-
- object - Variable in class nxopen.Selection.SelectObjectData
-
The selected object
- object - Variable in class nxopen.Selection.SelectScreenPositionData
-
View of selected screen location
- object - Variable in class nxopen.Selection.SelectTaggedObjectData
-
The selected object
- OBJECT - Static variable in class nxopen.shipdesign.ShipNavigatorNodeBuilder.NodeTypes
-
The object node type.
- Object() - Constructor for class nxopen.uf.UFBound.Object
-
- Object(Tag, int) - Constructor for class nxopen.uf.UFBound.Object
-
- object - Variable in class nxopen.uf.UFDraw.AskSxlineSxsegData
-
- object - Variable in class nxopen.uf.UFDrf.GdtLeaderData
-
- Object() - Constructor for class nxopen.uf.UFDrf.Object
-
- Object(Tag, Tag, UFDrf.AssocType, int, Tag, double[]) - Constructor for class nxopen.uf.UFDrf.Object
-
- object - Variable in class nxopen.uf.UFMotion.Trace
-
- object - Variable in class nxopen.uf.UFSket.InitializeSketchData
-
- object - Variable in class nxopen.uf.UFStd.StlError
-
- object - Variable in class nxopen.uf.UFUi.ChainedPoints
-
- OBJECT - Static variable in class nxopen.validate.ResultObject.ResultTypes
-
Object
- OBJECT - Static variable in class nxopen.ViewDependentDisplayManager.Font
-
- OBJECT - Static variable in class nxopen.ViewDependentDisplayManager.Width
-
- OBJECT - Static variable in class nxopen.weld.ExportWeldBuilder.AttributeOriginType
-
- OBJECT - Static variable in class nxopen.weld.InformationBuilder.AttributeOriginType
-
- OBJECT1 - Static variable in class nxopen.assemblies.ClearanceAnalysisBuilder.ClearanceZoneSource
-
- object1() - Method in interface nxopen.features.DatumAxisBuilder
-
Returns the first object (i.e. a planar face or datum plane).
- object1() - Method in interface nxopen.MeasureAngleBuilder
-
Returns the object1
License requirements: None.
- object1() - Method in interface nxopen.MeasureDistanceBuilder
-
Returns the object1
License requirements: None.
- object1 - Variable in class nxopen.uf.UFClear.AskNextInterfData
-
- object1 - Variable in class nxopen.uf.UFDrf.LineObject
-
- object1 - Variable in class nxopen.uf.UFGexp.AskAngleParmsData
-
- object1 - Variable in class nxopen.uf.UFMotion.Measurement
-
- OBJECT2 - Static variable in class nxopen.assemblies.ClearanceAnalysisBuilder.ClearanceZoneSource
-
- object2() - Method in interface nxopen.features.DatumAxisBuilder
-
Returns the second object (i.e. a planar face or datum plane).
- object2() - Method in interface nxopen.MeasureAngleBuilder
-
Returns the object2
License requirements: None.
- object2() - Method in interface nxopen.MeasureDistanceBuilder
-
Returns the object2
License requirements: None.
- object2 - Variable in class nxopen.uf.UFClear.AskNextInterfData
-
- object2 - Variable in class nxopen.uf.UFGexp.AskAngleParmsData
-
- object2 - Variable in class nxopen.uf.UFMotion.Measurement
-
- object2Tag - Variable in class nxopen.uf.UFDrf.Object
-
- OBJECT_ATTRIBUTE - Static variable in class nxopen.tooling.SpreadsheetData.KeywordType
-
Object attribute defined in spreadsheet
- OBJECT_ATTRIBUTE_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
-
Subpart object attribute property
- OBJECT_CHILDREN - Static variable in class nxopen.ame.SelectAndHighlightBuilder.SelType
-
- OBJECT_COUNT - Static variable in class nxopen.DxfdwgImporter.ProcessingOrderAs
-
ObjectCount
- OBJECT_CREATED_BY_USER_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
-
Subpart object created by user property
- OBJECT_CREATED_DATE_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
-
Subpart object created date property
- OBJECT_CREATED_VERSION_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
-
Subpart object created version property
- OBJECT_IN_COMPONENT_PART - Static variable in class nxopen.AttributePropertiesBaseBuilder.ObjectOptions
-
Deprecated.
Apply attribute to the object in the component part
- OBJECT_LEVEL_CHECK_PROJECTION - Static variable in class nxopen.cae.qualityaudit.Action.Id
-
the action listing projection errors at object level.
- OBJECT_METHOD - Static variable in class nxopen.annotations.Centerline2dBuilder.Offset
-
offset object method
- OBJECT_METHOD - Static variable in class nxopen.annotations.Centerline3dBuilder.Offset
-
Offset Object, applicable only for creation
- OBJECT_MISALIGNED - Static variable in class nxopen.geometricanalysis.ExamineGeometry.Check
-
ObjectMisaligned
- OBJECT_MODIFIED_BY_USER_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
-
Subpart object modified by user property
- OBJECT_MODIFIED_DATE_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
-
Subpart object modified date property
- OBJECT_MODIFIED_VERSION_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
-
Subpart object modified version property
- OBJECT_NAME_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
-
Subpart object name property
- OBJECT_REF_BY_WAVE_LINK_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
-
Subpart object referenced by Wave link property
- OBJECT_SELECTED - Static variable in class nxopen.Selection.Response
-
User selected an object
- OBJECT_SELECTED - Static variable in class nxopen.uistyler.DialogResponse
-
Object was selected.
- OBJECT_SELECTED_BY_NAME - Static variable in class nxopen.Selection.Response
-
User selected object by name
- OBJECT_SELECTED_BY_NAME - Static variable in class nxopen.uistyler.DialogResponse
-
Object was selected by name.
- OBJECT_SET - Static variable in class nxopen.validate.ResultObject.ResultTypes
-
Object Set
- OBJECT_TINY - Static variable in class nxopen.geometricanalysis.ExamineGeometry.Check
-
ObjectTiny
- OBJECT_WAVE_LINKED_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
-
Subpart object Wave linked property
- objectApplication() - Method in interface nxopen.plas.RunBuilder
-
Returns the application name of the run.
- objectArray - Variable in class nxopen.features.PatchOpeningsBuilder.CreatePathFromOpeningData
-
The opening objects that were used to create the path.
- objectArray - Variable in class nxopen.Selection.SelectObjectsData
-
The selected objects
- objectArray - Variable in class nxopen.Selection.SelectTaggedObjectsData
-
The selected objects
- ObjectAssocData() - Constructor for class nxopen.uf.UFDrf.ObjectAssocData
-
- ObjectAssocData(Tag, Tag, Tag, UFDrf.ObjectAssocPointType, UFDrf.ObjectAssocLineType, double[], double[], double, double[]) - Constructor for class nxopen.uf.UFDrf.ObjectAssocData
-
- objectAssocModifier - Variable in class nxopen.uf.UFDrf.Object
-
- objectAssocModValue - Variable in class nxopen.uf.UFSket.DimObject
-
- objectAssocType - Variable in class nxopen.uf.UFDrf.Object
-
- objectAssocType - Variable in class nxopen.uf.UFSket.DimObject
-
- ObjectAttributeData() - Constructor for class nxopen.annotations.AssociativeText.ObjectAttributeData
-
- objectAttributeManagement() - Method in interface nxopen.tooling.ToolingManager
-
Returns the ObjectAttributeManagementCollection instance belonging to this part .
- ObjectAttributeManagementBuilder - Interface in nxopen.tooling
-
- ObjectAttributeManagementBuilder.FilterAccordingToAttributeType - Class in nxopen.tooling
-
the selection filter type according to attribute
- ObjectAttributeManagementBuilder.FilterType - Class in nxopen.tooling
-
the selection filter type
- ObjectAttributeManagementBuilder.ShowComponentsType - Class in nxopen.tooling
-
the show type according to attribute
- ObjectAttributeManagementBuilder.ShowType - Class in nxopen.tooling
-
show attributes of selected objects or show objects according to attribute
- ObjectAttributeManagementCollection - Interface in nxopen.tooling
-
- ObjectAttributeReferenceBuilder - Interface in nxopen.formboard
-
Builder for "object attribute" used in formboard which enbles user to create
annotation in drafting functionality.
- ObjectAttributeReferenceBuilder.LeaderType - Class in nxopen.formboard
-
Enum which defines types of leader user wants to associate with the annotation.
- ObjectBuilder - Interface in nxopen.assemblies.productinterface
-
Represents a Product Interface Object Builder.
- ObjectBuilder.AddProductInterfaceData - Class in nxopen.assemblies.productinterface
-
- ObjectBuilder.BuilderVersion - Class in nxopen.assemblies.productinterface
-
Version number of product interface builder
- ObjectBuilder.Mate - Class in nxopen.assemblies.productinterface
-
An enum representing the settings available for rule checking during creation of mating conditions
- ObjectBuilder.Wave - Class in nxopen.assemblies.productinterface
-
An enum representing settings available for rule checking during creation of WAVE geomtery and interpart expressions
- objectCollector() - Method in interface nxopen.routing.DeleteFontsBuilder
-
Returns the routing object collector
License requirements: routing_base ("Routing Basic")
.
- objectCollector() - Method in interface nxopen.routing.DeleteGapsBuilder
-
Returns the routing object collector
License requirements: routing_base ("Routing Basic")
.
- objectCollector() - Method in interface nxopen.routing.DeleteObjectsBuilder
-
Returns the routing object collector
License requirements: routing_base ("Routing Basic")
.
- objectCollector() - Method in interface nxopen.routing.InfoObjectsBuilder
-
Returns the routing object collector
License requirements: routing_base ("Routing Basic")
.
- ObjectColorPicker - Interface in nxopen.blockstyler
-
Represents an Object Color Picker Block .
- objectConnection() - Method in interface nxopen.ame.CallMethodRuleBuilder
-
Returns the object connection ui block
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- objectConnection() - Method in interface nxopen.ame.OperandRuleBuilder
-
Returns the object connection ui block
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- objectConnection() - Method in interface nxopen.ame.ParameterRuleBuilder
-
Returns the object connection ui block
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- ObjectConnectionBuilder - Interface in nxopen.ame
-
JA class for the reuse object connection block .
- objectConnectionDetail() - Method in interface nxopen.ame.CallMethodRuleBuilder
-
Returns the object connection detail ui block
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- objectConnectionDetail() - Method in interface nxopen.ame.OperandRuleBuilder
-
Returns the object connection detail ui block
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- objectConnectionDetail() - Method in interface nxopen.ame.OperatorRuleBuilder
-
Returns the Variable component
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- objectConnectionDetail() - Method in interface nxopen.ame.ParameterRuleBuilder
-
Returns the object connection detail ui block
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- ObjectConnectionDetailBuilder - Interface in nxopen.ame
-
JA class for the reuse object connection detail block .
- ObjectContainer - Interface in nxopen.cam
-
Represents a Cam Objects Builder .
- objectCount - Variable in class nxopen.uf.UFDisp.AskGeometryOfMaterialData
-
- objectCount - Variable in class nxopen.uf.UFModl.CreateExtrudeTrimOpts1Data
-
- objectCount - Variable in class nxopen.uf.UFModl.CreateExtrudeTrimOptsData
-
- objectCount - Variable in class nxopen.uf.UFModl.CreateExtrusionDefault1Data
-
- objectCount - Variable in class nxopen.uf.UFModl.CreateExtrusionDefaultData
-
- objectCount - Variable in class nxopen.uf.UFModl.CreateExtrusionDirData
-
- ObjectCreateBuilder - Interface in nxopen.pdm
-
- ObjectData() - Constructor for class nxopen.routing.FormboardFrame.ObjectData
-
- ObjectDataCsys() - Constructor for class nxopen.features.FlatPattern.ObjectDataCsys
-
- ObjectDataCsys(Point, CartesianCoordinateSystem, DatumCsys) - Constructor for class nxopen.features.FlatPattern.ObjectDataCsys
-
Constructor for the ObjectDataCsys object.
- ObjectDataCsys() - Constructor for class nxopen.features.FlatSolid.ObjectDataCsys
-
- ObjectDataCsys(TaggedObject, TaggedObject) - Constructor for class nxopen.features.FlatSolid.ObjectDataCsys
-
Constructor for the ObjectDataCsys object.
- ObjectDataEdge() - Constructor for class nxopen.features.FlatPattern.ObjectDataEdge
-
- ObjectDataEdge(Curve, Edge) - Constructor for class nxopen.features.FlatPattern.ObjectDataEdge
-
Constructor for the ObjectDataEdge object.
- ObjectDataFace() - Constructor for class nxopen.features.FlatPattern.ObjectDataFace
-
- ObjectDataFace(Curve, Face, Face) - Constructor for class nxopen.features.FlatPattern.ObjectDataFace
-
Constructor for the ObjectDataFace object.
- ObjectDataGeneral() - Constructor for class nxopen.features.FlatPattern.ObjectDataGeneral
-
- ObjectDataGeneral(TaggedObject, TaggedObject, TaggedObject) - Constructor for class nxopen.features.FlatPattern.ObjectDataGeneral
-
Constructor for the ObjectDataGeneral object.
- objectDescription() - Method in interface nxopen.ame.EngineeringObjectNameBuilder
-
Returns the eo def description
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- objectDescription() - Method in interface nxopen.ame.ObjectNameBuilder
-
Returns the object description
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- objectDescription() - Method in interface nxopen.ame.ObjectNameIndexBuilder
-
Returns the object description
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- objectDescription() - Method in interface nxopen.features.PartGeometryCopySelectBuilder
-
Returns the object description of selected item
License requirements: None.
- ObjectEvaluatorBuilder - Interface in nxopen.ame
-
- objectForNewComponent() - Method in interface nxopen.assemblies.CreateNewComponentBuilder
-
Returns the objects for select block
License requirements: None.
- objectFromExp() - Method in interface nxopen.ame.ExtractAttributeRelativeBuilder
-
Returns the object found by the relative formula
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- ObjectGeneralPropertiesBuilder - Interface in nxopen
-
- objectGroupName() - Method in interface nxopen.tooling.ReusableObject
-
Returns the name of the group of objects which are saved through UDO
License requirements: None.
- objectHasBox(Tag) - Method in interface nxopen.uf.UFFltr
-
- objectId() - Method in interface nxopen.diagramminglibraryauthor.LineTypeBuilder
-
Returns the object Id of the line type.
- objectId() - Method in interface nxopen.linedesigner.ReuseLibraryDragData
-
Returns the object id of Drag Data
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- objectIndex() - Method in interface nxopen.ame.ObjectNameIndexBuilder
-
Returns the object index
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- objectInformation() - Method in interface nxopen.mechatronics.FunctionObjectBuilder
-
Returns the object information builder, used to specify the information of function object.
- objectInformation() - Method in interface nxopen.mechatronics.LogicObjectBuilder
-
Returns the object information builder, used to specify the information of logic object.
- objectInformation() - Method in interface nxopen.mechatronics.RequirementBuilder
-
Returns the object information builder, used to specify the information of requirement object.
- ObjectInformationBuilder - Interface in nxopen.mechatronics
-
Represents a
ObjectInformationBuilder
This is a sub-builder class and cannot be directly instantiated
Created in NX8.5.0
- objectiveGoal() - Method in interface nxopen.cae.optimization.DAOObjective
-
Returns the objective goal
License requirements: None.
- objectives() - Method in interface nxopen.cae.optimization.TBSOptimizationSolution
-
Returns the objective function of the optimization
License requirements: None.
- objectiveTargetValue - Variable in class nxopen.optimization.OptimizationBuilder.OptimizationObjective
-
Value of objective target
- objectiveType - Variable in class nxopen.optimization.DesignStudyBuilder.DesignStudyObjective
-
Objectibe type
- objectiveType - Variable in class nxopen.optimization.OptimizationBuilder.OptimizationObjective
-
Objectibe type
- objectLabel() - Method in interface nxopen.cae.responsesimulation.BaseBuilder
-
Returns the object label
License requirements: nx_response_anlys ("NX Response Analysis")
.
- ObjectLabel - Interface in nxopen.cae.responsesimulation
-
Represents the setting to label an object.
- ObjectLevelCorrectedProjectionResult - Interface in nxopen.cae.qualityaudit
-
The Quality Audit ObjectLevelCorrectedProjectionResult is a class containing information about corrected projections on universal connections.
- ObjectLevelFailedProjectionResult - Interface in nxopen.cae.qualityaudit
-
The Quality Audit ObjectLevelFailedProjectionResult is a class containing information about failed projections on universal connections.
- ObjectLevelFailedProjectionToleranceResult - Interface in nxopen.cae.qualityaudit
-
The Quality Audit ObjectLevelFailedProjectionToleranceResult is a class containing information about projections
that failed the tolerance criteria although the projection itself was successful.
- ObjectLevelProjectionCheck - Interface in nxopen.cae.qualityaudit
-
This action has as output the list of failed projections of the universal connections at object level.
- objectList() - Method in interface nxopen.features.PartGeometryCopyBuilder
-
Returns the list of copied objects
License requirements: None.
- ObjectList - Interface in nxopen
-
Represents a list of objects.
- ObjectList.DeleteOption - Class in nxopen
-
Used to indicate whether to delete the object
when removing it from the list
- ObjectMoveData() - Constructor for class nxopen.features.subdivision.CageManipulatorData.ObjectMoveData
-
- ObjectMoveData(NXObject, Point3d, Point3d, View, double, Vector3d) - Constructor for class nxopen.features.subdivision.CageManipulatorData.ObjectMoveData
-
Constructor for the ObjectMoveData object.
- objectName() - Method in interface nxopen.ame.EngineeringObjectNameBuilder
-
Returns the eo def name
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- objectName() - Method in interface nxopen.ame.ObjectNameBuilder
-
Returns the object name
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- objectName() - Method in interface nxopen.ame.ObjectNameIndexBuilder
-
Returns the object name
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- objectName() - Method in interface nxopen.features.PartGeometryCopySelectBuilder
-
Returns the object name of selected item
License requirements: None.
- objectName() - Method in interface nxopen.mechatronics.FunctionObjectBuilder
-
- objectName() - Method in interface nxopen.mechatronics.SensorsActuatorsListBuilder
-
Returns the object name
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- ObjectNameBuilder - Interface in nxopen.ame
-
Object Name JA class .
- objectNameDisplay() - Method in interface nxopen.preferences.PartVisualizationNamesBorders
-
Returns the object name display
License requirements: None.
- ObjectNameIndexBuilder - Interface in nxopen.ame
-
Object Name Index JA class .
- ObjectNotes - Interface in nxopen.cam
-
- objectOffWorkPlane() - Method in interface nxopen.preferences.SessionWorkPlane
-
- objectPicker() - Method in interface nxopen.AttributePropertiesBaseBuilder
-
- objectPosition() - Method in interface nxopen.ame.AccessorEvaluatorBuilder
-
Returns the object index value given by the user
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- objectPosition() - Method in interface nxopen.features.vehicledesign.WheelFixingBuilder
-
Returns the wheel fixing object position.
- ObjectPreferences - Interface in nxopen.preferences
-
Captures the UI based calls required for Object Preferences
To obtain an instance of this class, refer to
UI
Created in NX3.0.0
- objectPreferences() - Method in interface nxopen.preferences.PartPreferences
-
Returns object for doing object preferences settings applicable to displayed part .
- objectPreferences() - Method in interface nxopen.UI
-
the UI based Object Preferences in the current session.
- ObjectPreferences.Translucency - Class in nxopen.preferences
-
Describes whether the translucency is enabled or disabled
- objectProperties() - Method in interface nxopen.tooling.DieEngDieTipBuilder
-
Callback of object properties button
License requirements: die_engineering ("DIE ENGINEERING")
.
- objectProperties() - Method in interface nxopen.tooling.DieEngLineupBuilder
-
The object properties button call back
License requirements: die_engineering ("DIE ENGINEERING")
.
- ObjectRelationship - Interface in nxopen.routing
-
Represents a relationship between Routing objects.
- objects() - Method in interface nxopen.annotations.AssociatedObjectsBuilder
-
- OBJECTS - Static variable in class nxopen.AttributeTemplatesBuilder.AccessKey
-
This attribute template will be accessible by all non-part related objects including solids, features, etc
- objects() - Method in interface nxopen.cae.AssignNodalCSBuilder
-
Returns the objects
License requirements: None.
- objects - Variable in class nxopen.cae.SetManager.TargetSetMembersData
-
objects in set
- objects() - Method in interface nxopen.drawings.DraftingComponentSelectionBuilder
-
Returns the selected objects (part occurrences) based on current object type
License requirements: None.
- objects() - Method in interface nxopen.drawings.HiddenObjectsBuilder
-
Returns the objects
License requirements: None.
- objects() - Method in interface nxopen.features.DatumAxisBuilder
-
Returns the objects to define Datum Axis.
- objects() - Method in interface nxopen.features.RemoveParametersBuilder
-
Returns
the object list whose associated feature parameters are
to be removed.
- objects() - Method in interface nxopen.features.subdivision.CopyCageBuilder
-
Returns the objects to be copied
License requirements: None.
- objects() - Method in interface nxopen.features.subdivision.DeleteConstraintBuilder
-
Returns the constrained objects whose constraint to be deleted.
- objects() - Method in interface nxopen.features.subdivision.MirrorCageBuilder
-
Returns the objects to be mirrored
License requirements: None.
- objects() - Method in interface nxopen.features.subdivision.OffsetCageBuilder
-
Returns the objects to be offset
License requirements: None.
- objects() - Method in interface nxopen.features.subdivision.SubdivisionDeleteObjectBuilder
-
Returns the objects to be deleted.
- OBJECTS - Static variable in class nxopen.fields.SpatialMap.BoundingBoxMapEnum
-
- objects() - Method in interface nxopen.tooling.CreateBoxBuilder
-
Returns the objects used for bounding box creation.
- objects - Variable in class nxopen.uf.UFCurve.SectionGeneralData
-
- objects - Variable in class nxopen.uf.UFDraw.AskDisplayedObjectsData
-
- objects - Variable in class nxopen.uf.UFDraw.AskRenderSetObjectsData
-
- objects - Variable in class nxopen.uf.UFDrf.AskObjectsControlledByExpData
-
- objects - Variable in class nxopen.uf.UFModl.AskExtrusionData
-
- objects - Variable in class nxopen.uf.UFModl.AskRevolutionData
-
- objects - Variable in class nxopen.uf.UFModl.CreateExtrudeTrimOpts1Data
-
- objects - Variable in class nxopen.uf.UFModl.CreateExtrudeTrimOptsData
-
- objects - Variable in class nxopen.uf.UFModl.CreateExtrusionDefault1Data
-
- objects - Variable in class nxopen.uf.UFModl.CreateExtrusionDefaultData
-
- objects - Variable in class nxopen.uf.UFModl.CreateExtrusionDirData
-
- objects - Variable in class nxopen.uf.UFPlist.AskObjectsData
-
- objects - Variable in class nxopen.uf.UFProcessAid.AskDatumObjectsData
-
- objects - Variable in class nxopen.uf.UFRoute.AskBuiltInPathObjsData
-
- objects - Variable in class nxopen.uf.UFUi.AskGlobalSelObjectListData
-
- objects - Variable in class nxopen.uf.UFUi.SelectRoutingObjectsData
-
- objects - Variable in class nxopen.uf.UFUiOnt.AskSelectedNodesData
-
- objects - Variable in class nxopen.uf.UFWave.AskOutOfDateObjectsData
-
- objects() - Method in interface nxopen.weld.WeldLabelBuilder
-
Returns the objects that are used to create labels.
- objects() - Method in interface nxopen.weld.WeldPmiBuilder
-
Returns the objects (either features or curves) that are used to create PMI symbols.
- objects - Variable in class nxopen.weld.WeldPointBuilder.FaceSetData
-
the face set reference objects
- ObjectsData() - Constructor for class nxopen.cam.PreprocessGeometryBuilder.ObjectsData
-
- objectSelection() - Method in interface nxopen.assemblies.ConstraintDisplayBuilder
-
Returns the selected constraints and components.
- objectSelection() - Method in interface nxopen.formboard.ObjectAttributeReferenceBuilder
-
Returns the object selected by user to associated annotation
License requirements: routing_harness ("Routing Harness")
.
- ObjectSelectionData() - Constructor for class nxopen.features.subdivision.CageManipulatorData.ObjectSelectionData
-
- ObjectSelectionData(NXObject, Point3d, Vector3d, boolean) - Constructor for class nxopen.features.subdivision.CageManipulatorData.ObjectSelectionData
-
Constructor for the ObjectSelectionData object.
- objectSelectionOption() - Method in interface nxopen.features.BridgeCurveBuilder
-
- ObjectSelector - Interface in nxopen
-
Represents a
ObjectSelector
to be used when exporting the the selected objects
from NX part.This class is created using
DexManager
.
- ObjectSelector.Scope - Class in nxopen
-
Represents the selection scope
- objectSet1 - Variable in class nxopen.uf.UFCurve.AskIntParmsData
-
- objectSet1 - Variable in class nxopen.uf.UFCurve.AskIntParmsScData
-
- objectSet2 - Variable in class nxopen.uf.UFCurve.AskIntParmsData
-
- objectSet2 - Variable in class nxopen.uf.UFCurve.AskIntParmsScData
-
- ObjectsFeedsBuilder - Interface in nxopen.cam
-
- objectsForAnalysis() - Method in interface nxopen.geometricanalysis.GeometricProperties
-
Returns the Objects for analysis
License requirements: None.
- objectsInGroup() - Method in interface nxopen.GroupBuilder
-
Returns the objects in group
License requirements: None.
- ObjectSink - Interface in nxopen.mechatronics
-
Represents the Object Sink.
- ObjectSinkBuilder - Interface in nxopen.mechatronics
-
- ObjectSinkBuilder.DeleteSourceType - Class in nxopen.mechatronics
-
the delete option.
- ObjectSinkCollection - Interface in nxopen.mechatronics
-
Represents a collection of Object Sink.
- objectSinks() - Method in interface nxopen.mechatronics.PhysicsManager
-
- objectsOffSketchWorkPlaneNonSelectable() - Method in interface nxopen.preferences.SessionVisualizationEmphasis
-
Returns the setting that controls whether or not objects off the work
plane are non-selectable in the Sketch Task Environment.
- objectsOffWcsWorkPlaneNonSelectable() - Method in interface nxopen.preferences.SessionVisualizationEmphasis
-
Returns the setting that controls whether or not objects off the WCS work
plane are non-selectable.
- ObjectSource - Interface in nxopen.mechatronics
-
Represents the Object Source.
- ObjectSourceBuilder - Interface in nxopen.mechatronics
-
- ObjectSourceBuilder.CopyEventTriggerOption - Class in nxopen.mechatronics
-
Trigger Option in copy event.
- ObjectSourceCollection - Interface in nxopen.mechatronics
-
Represents a collection of Object Source.
- objectSources() - Method in interface nxopen.mechatronics.PhysicsManager
-
- objectsSet1() - Method in interface nxopen.annotations.AssociatedObjectsSetsBuilder
-
Returns the objects of set1
License requirements: None.
- objectsSet2() - Method in interface nxopen.annotations.AssociatedObjectsSetsBuilder
-
Returns the objects of set2
License requirements: None.
- objectsToAbsolutePosition() - Method in interface nxopen.assemblies.AbsolutePositionBuilder
-
Returns the object list selected for absolute position
License requirements: None.
- objectsToCopy() - Method in interface nxopen.drafting.CutCopyPasteBuilder
-
Returns the objects list to copy.
- objectsToEdit() - Method in interface nxopen.features.shipdesign.EditContextAttributesBuilder
-
Returns the basic design objects whose context attributes will be editted.
- objectsToExamine() - Method in interface nxopen.geometricanalysis.ExamineGeometry
-
Returns the Objects to examine
License requirements: None.
- objectsToHighlightUnhighlight(DisplayableObject[]) - Method in interface nxopen.features.CustomFeatureHighlightEvent
-
Highlights or unhighlights the objects passed in objectsToHighlight depending on the highlightFlag status
License requirements: solid_modeling ("SOLIDS MODELING")
.
- objectsToMove() - Method in interface nxopen.geometricutilities.PointSetAlignmentBuilder
-
Returns the objects to move
License requirements: None.
- objectsToProject() - Method in interface nxopen.features.subdivision.SubdivisionProjectCageBuilder
-
Returns the objects to project
License requirements: None.
- objectsToScale() - Method in interface nxopen.features.ScaleCurveBuilder
-
Returns the input cuvres,point to scale
License requirements: None.
- objectsToSection() - Method in interface nxopen.annotations.LightweightSectionBuilder
-
Returns the objects to section
License requirements: None.
- objectsToSection() - Method in interface nxopen.features.SectionCurveBuilder
-
Returns the selected objects
License requirements: None.
- objectSubtype - Variable in class nxopen.RuleManager.AdoptableTypes
-
- objectSubtype - Variable in class nxopen.uf.UFUi.Mask
-
- ObjectsUdeSet - Interface in nxopen.cam
-
- objectTag - Variable in class nxopen.cam.CAMObject.ErrorItem
-
- objectTag - Variable in class nxopen.uf.UFBound.Object
-
- objectTag - Variable in class nxopen.uf.UFCurve.Constraint
-
- objectTag - Variable in class nxopen.uf.UFDrf.Object
-
- objectTag - Variable in class nxopen.uf.UFModl.TrimObject
-
- objectTag - Variable in class nxopen.uf.UFSket.DimObject
-
- objectTags - Variable in class nxopen.uf.UFDisp.AskGeometryOfMaterialData
-
- objectToAssignParamSelection() - Method in interface nxopen.mechatronics.RuntimeFormulaBuilder
-
Returns the object to assign param selection
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- objectToCopy() - Method in interface nxopen.mechatronics.ObjectSourceBuilder
-
Returns the object select.
- objectToDimension() - Method in interface nxopen.tooling.AutoDimensionBuilder
-
Returns the objects to dimension
License requirements: None.
- objectToEdit() - Method in interface nxopen.features.EdgeSymmetryBuilder
-
Returns the object to edit
License requirements: None.
- objectToEdit() - Method in interface nxopen.features.MatchEdgeBuilder
-
Returns the edge to edit
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- objectToExtract() - Method in interface nxopen.features.ExtractFaceBuilder
-
Returns a list of the extracted objects.
- objectToMoveObject() - Method in interface nxopen.features.MoveObjectBuilder
-
Returns the objects to move-rotate
License requirements: None.
- objectToReplace() - Method in interface nxopen.sim.SinumerikCaSimplifyBodiesBuilder
-
Returns the object to replace
License requirements: None.
- ObjectTransformer - Interface in nxopen.mechatronics
-
Represents the Object Transformer.
- objectTransformer() - Method in interface nxopen.mechatronics.PhysicsManager
-
- ObjectTransformerBuilder - Interface in nxopen.mechatronics
-
- ObjectTransformerBuilder.TransformSourceType - Class in nxopen.mechatronics
-
the transform option.
- ObjectTransformerCollection - Interface in nxopen.mechatronics
-
Represents a collection of Object Transformer.
- objectType() - Method in interface nxopen.ame.ChildrenEvaluatorBuilder
-
Returns the object type filter selection
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- objectType() - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
Returns the object type for onestep unform.
- objectType() - Method in interface nxopen.drawings.DraftingComponentSelectionBuilder
-
Returns the object type
License requirements: None.
- objectType() - Method in interface nxopen.drawings.DrawingRegionBuilder
-
Returns the type
License requirements: nx_drawing_auto ("NX Drawing Automation")
.
- objectType() - Method in interface nxopen.features.PartGeometryCopyBuilder
-
Returns the type of object to be copied
License requirements: None.
- objectType() - Method in interface nxopen.features.PartGeometryCopySelectBuilder
-
Returns the object type of selected item
License requirements: None.
- objectType() - Method in interface nxopen.features.shipdesign.CopyObjectsBuilder
-
Returns the type of objects to copy.
- objectType - Variable in class nxopen.routing.RouteManager.SearchCriteria
-
Required.
- objectType - Variable in class nxopen.RuleManager.AdoptableTypes
-
- objectType() - Method in interface nxopen.tooling.QuickQuotationBuilder
-
Returns the object type.
- objectType - Variable in class nxopen.uf.UFUi.Mask
-
- objectTypes() - Method in interface nxopen.DxfdwgCreator
-
Returns the objectTypes - this is subcomponent being used to set object types filters.
- objectTypes() - Method in interface nxopen.IgesCreator
-
Returns the objectTypes - this is subcomponent being used to set object types filters.
- objectTypes() - Method in interface nxopen.IgesImporter
-
Returns the objectTypes - this is subcomponent being used to set object types filters.
- objectTypes() - Method in interface nxopen.Step203Creator
-
- objectTypes() - Method in interface nxopen.Step203Importer
-
Returns the objectTypes - this is subcomponent being used to set object types filters.
- objectTypes() - Method in interface nxopen.Step214Creator
-
- objectTypes() - Method in interface nxopen.Step214Importer
-
Returns the objectTypes - this is subcomponent being used to set object types filters.
- objectTypes() - Method in interface nxopen.Step242Importer
-
Returns the objectTypes - this is subcomponent being used to set object types filters.
- objectTypes() - Method in interface nxopen.StepCreator
-
Returns the objectTypes - this is subcomponent being used to set object types filters.
- ObjectTypeSelector - Interface in nxopen
-
Represents a
ObjectTypeSelector
to be used when filter out the objects
based on the type during import/export.
- objectValue() - Method in interface nxopen.mechatronics.GanttOperationConditionBuilder
-
Returns the condition value use to evaluate this condition for the selected property in condition object.
- objectValue() - Method in interface nxopen.mechatronics.GanttOperationParameterBuilder
-
Returns the parameter value which will be set to the input physics object during runtime.
- objectView() - Method in interface nxopen.annotations.Associativity
-
Returns the object view.
- objectView - Variable in class nxopen.uf.UFDrf.ObjectAssocData
-
- objectViewTag - Variable in class nxopen.uf.UFDrf.Object
-
- ObjectWorkInstructionBuilder - Interface in nxopen.cam
-
- objorpartattrnames - Variable in class nxopen.tooling.SpreadsheetData.DefinedAttributesExpressionsData
-
Object name or part attribute to find part
- objs - Variable in class nxopen.uf.UFRoute.AskRouteObjsData
-
- objs - Variable in class nxopen.uf.UFUi.AskSelObjectListData
-
- objSelectTarget() - Method in interface nxopen.tooling.ValidCheckBuilder
-
Returns the target object selection list
License requirements: None.
- objSelectTool() - Method in interface nxopen.tooling.ValidCheckBuilder
-
Returns the tool object selection list
License requirements: None.
- objSelectType() - Method in interface nxopen.tooling.ValidCheckBuilder
-
Returns the object selection type
License requirements: None.
- objSpecificSelection() - Method in interface nxopen.display.TrueShadingBuilder
-
Returns the selected object(s) list
License requirements: None.
- objtags - Variable in class nxopen.diagramming.FormattedStringBuilder.ReferencedAttributesData
-
The owners of the referenced attributes
- objtype1() - Method in interface nxopen.MeasureAngleBuilder
-
Returns the otype1
License requirements: None.
- objtype2() - Method in interface nxopen.MeasureAngleBuilder
-
Returns the otype2
License requirements: None.
- obliqueExtensionLineAngle() - Method in interface nxopen.annotations.LineAndArrowPreferences
-
Returns the oblique extension line angle
License requirements: None.
- obliqueExtensionLineAngle() - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
Returns the extension line angle.
- obliqueExtensionLineAngle - Variable in class nxopen.uf.UFDrf.LineArrowPreferences
-
- OBLONG - Static variable in class nxopen.die.PierceItemBuilder.HoleShapeType
-
Oblong shaped hole
- OBLONG - Static variable in class nxopen.tooling.DieDesPierceInsertBuilder.HoleShapeTypes
-
- OBSCURE_DULL_AZURE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- OBSCURE_DULL_BLUE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- OBSCURE_DULL_CYAN_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- OBSCURE_DULL_GREEN_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- OBSCURE_DULL_MAGENTA_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- OBSCURE_DULL_ORANGE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- OBSCURE_DULL_PINK_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- OBSCURE_DULL_RED_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- OBSCURE_DULL_SPRING_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- OBSCURE_DULL_TEAL_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- OBSCURE_DULL_VIOLET_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- OBSCURE_DULL_YELLOW_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- OBSCURE_GRAY_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- OBSCURE_WEAK_BLUE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- OBSCURE_WEAK_CYAN_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- OBSCURE_WEAK_GREEN_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- OBSCURE_WEAK_MAGENTA_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- OBSCURE_WEAK_RED_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- OBSCURE_WEAK_YELLOW_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- observationNode() - Method in interface nxopen.cae.responsesimulation.ModalResultsEvaluationSettingBuilder
-
Returns the observation nodes.
- observationNode() - Method in interface nxopen.cae.responsesimulation.PrlResultsEvaluationSettingBuilder
-
- obsoleteProductionUnit(ModelPlantRoot, ModelProductionUnit) - Method in interface nxopen.linedesigner.ModelPlantManager
-
Obsolete Production Unit
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- obstructedColor() - Method in interface nxopen.features.vehicledesign.AllAroundVisionBuilder
-
Returns the color of the obstructed area.
- obstructionFaces() - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder
-
Returns the faces selection used to identify the vehicle obstruction surfaces.
- obstructionFacetBodies() - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder
-
Returns the faces selection used to identify the vehicle obstruction facet bodies.
- obutton0() - Method in interface nxopen.display.TrueShadingBuilder
-
Per Object override material button 1
License requirements: None.
- obutton1() - Method in interface nxopen.display.TrueShadingBuilder
-
Per Object override material button 2
License requirements: None.
- obutton10() - Method in interface nxopen.display.TrueShadingBuilder
-
Per Object override material button 11
License requirements: None.
- obutton11() - Method in interface nxopen.display.TrueShadingBuilder
-
Per Object override material button 12
License requirements: None.
- obutton12() - Method in interface nxopen.display.TrueShadingBuilder
-
Per Object override material button 13
License requirements: None.
- obutton13() - Method in interface nxopen.display.TrueShadingBuilder
-
Per Object override material button 14
License requirements: None.
- obutton14() - Method in interface nxopen.display.TrueShadingBuilder
-
Per Object override material button 15
License requirements: None.
- obutton15() - Method in interface nxopen.display.TrueShadingBuilder
-
Per Object override material button 16
License requirements: None.
- obutton16() - Method in interface nxopen.display.TrueShadingBuilder
-
Per Object override material button 17
License requirements: None.
- obutton17() - Method in interface nxopen.display.TrueShadingBuilder
-
Per Object override material button 18
License requirements: None.
- obutton18() - Method in interface nxopen.display.TrueShadingBuilder
-
Per Object override material button 19
License requirements: None.
- obutton19() - Method in interface nxopen.display.TrueShadingBuilder
-
Per Object override material button 20
License requirements: None.
- obutton2() - Method in interface nxopen.display.TrueShadingBuilder
-
Per Object override material button 3
License requirements: None.
- obutton20() - Method in interface nxopen.display.TrueShadingBuilder
-
Per Object override material button 21
License requirements: None.
- obutton21() - Method in interface nxopen.display.TrueShadingBuilder
-
Per Object override material button 22
License requirements: None.
- obutton22() - Method in interface nxopen.display.TrueShadingBuilder
-
Per Object override material button 23
License requirements: None.
- obutton23() - Method in interface nxopen.display.TrueShadingBuilder
-
Per Object override material button 24
License requirements: None.
- obutton24() - Method in interface nxopen.display.TrueShadingBuilder
-
Per Object override material button 25
License requirements: None.
- obutton25() - Method in interface nxopen.display.TrueShadingBuilder
-
Per Object override material button 26
License requirements: None.
- obutton26() - Method in interface nxopen.display.TrueShadingBuilder
-
Per Object override material button 27
License requirements: None.
- obutton27() - Method in interface nxopen.display.TrueShadingBuilder
-
Per Object override material button 28
License requirements: None.
- obutton28() - Method in interface nxopen.display.TrueShadingBuilder
-
Per Object override material button 29
License requirements: None.
- obutton3() - Method in interface nxopen.display.TrueShadingBuilder
-
Per Object override material button 4
License requirements: None.
- obutton4() - Method in interface nxopen.display.TrueShadingBuilder
-
Per Object override material button 5
License requirements: None.
- obutton5() - Method in interface nxopen.display.TrueShadingBuilder
-
Per Object override material button 6
License requirements: None.
- obutton6() - Method in interface nxopen.display.TrueShadingBuilder
-
Per Object override material button 7
License requirements: None.
- obutton7() - Method in interface nxopen.display.TrueShadingBuilder
-
Per Object override material button 8
License requirements: None.
- obutton8() - Method in interface nxopen.display.TrueShadingBuilder
-
Per Object override material button 9
License requirements: None.
- obutton9() - Method in interface nxopen.display.TrueShadingBuilder
-
Per Object override material button 10
License requirements: None.
- OCC_NOT_SUPPORTED - Static variable in class nxopen.uf.UFConstants
-
- OccEntityLabelOffsetsData() - Constructor for class nxopen.cae.FEModelOccurrence.OccEntityLabelOffsetsData
-
- occIsInWorkPart(Tag) - Method in interface nxopen.uf.UFAssem
-
- occupant() - Method in interface nxopen.HumanPosturePredictionBuilder
-
Returns the occupant type: driver, front passenger or rear passenger.
- OCCURENCE_NAME - Static variable in class nxopen.linedesigner.RenameDialogeBuilder.SelectionTypeAPI
-
- OCCURRENCE - Static variable in class nxopen.AttributePropertiesBaseBuilder.ObjectOptions
-
Deprecated.
Apply attribute to the occurrence only
- occurrenceName() - Method in interface nxopen.linedesigner.RenameItemRevisionBuilder
-
Returns the occurrence name is return
License requirements: None.
- occurrences - Variable in class nxopen.uf.UFAssem.AskOccsOfEntityData
-
- OCF_ARCLENGTH - Static variable in class nxopen.uf.UFCurve.OcfMethod
-
- OCF_CHORDAL - Static variable in class nxopen.uf.UFCurve.OcfMethod
-
- OCF_CROSS_BOUNDARIES - Static variable in class nxopen.uf.UFCurve.OcfCrossBoundaries
-
- OCF_CROSS_BOUNDARIES_NONE - Static variable in class nxopen.uf.UFCurve.OcfCrossBoundaries
-
- OCF_GEODESIC - Static variable in class nxopen.uf.UFCurve.OcfMethod
-
- OCF_NO_EXTENSION - Static variable in class nxopen.uf.UFCurve.OcfTrimMethod
-
- OCF_SPAN_NONE - Static variable in class nxopen.uf.UFCurve.OcfSpanMethod
-
- OCF_SPAN_QUILT - Static variable in class nxopen.uf.UFCurve.OcfSpanMethod
-
- OCF_TANGENT - Static variable in class nxopen.uf.UFCurve.OcfTrimMethod
-
- OCF_TANGENTIAL - Static variable in class nxopen.uf.UFCurve.OcfMethod
-
- ocfAskCurves(Tag) - Method in interface nxopen.uf.UFCurve
-
- OcfAskCurvesData() - Constructor for class nxopen.uf.UFCurve.OcfAskCurvesData
-
- OcfData() - Constructor for class nxopen.uf.UFCurve.OcfData
-
- OcfData(UFCurve.OcfStringData[], int, UFCurve.OcfFaceData, UFCurve.OcfCrossBoundaries, UFCurve.OcfMethod, UFCurve.OcfTrimMethod, UFCurve.OcfSpanMethod, double, double, double) - Constructor for class nxopen.uf.UFCurve.OcfData
-
- OcfFaceData() - Constructor for class nxopen.uf.UFCurve.OcfFaceData
-
- OcfFaceData(Tag) - Constructor for class nxopen.uf.UFCurve.OcfFaceData
-
- ocfOffsetPtDirection(Tag, Tag) - Method in interface nxopen.uf.UFCurve
-
- OcfOffsetPtDirectionData() - Constructor for class nxopen.uf.UFCurve.OcfOffsetPtDirectionData
-
- OcfStringData() - Constructor for class nxopen.uf.UFCurve.OcfStringData
-
- OcfStringData(Tag, int, int, UFCurve.OcfValues[]) - Constructor for class nxopen.uf.UFCurve.OcfStringData
-
- OcfValues() - Constructor for class nxopen.uf.UFCurve.OcfValues
-
- OcfValues(String) - Constructor for class nxopen.uf.UFCurve.OcfValues
-
- OCT - Static variable in class nxopen.DateItemBuilder.MonthOfYear
-
- OCTAGON - Static variable in class nxopen.cam.TurnToolBuilder.InsertShapes
-
Insert shape: Octagon
- OCTAHEDRAL - Static variable in class nxopen.cae.Result.Component
-
- OCTAHEDRAL - Static variable in class nxopen.fields.DisplayPropertiesBuilder.TensorType
-
- OCTAVE - Static variable in class nxopen.cae.AfuMathOperation.TimeToSrsAxisType
-
Octave
- OCTAVE - Static variable in class nxopen.cae.xyplot.AxisType
-
Octave type
- OCTAVE - Static variable in class nxopen.cae.xyplot.FrequencyBandSummationBandType
-
Octave
- oDatumAxis - Variable in class nxopen.uf.UFModl.SmslotData
-
- OEM - Static variable in class nxopen.features.TextBuilder.ScriptOptions
-
Specifies a mapping to one of the OEM code pages, according to the current system locale setting
- oet - Variable in class nxopen.cae.aerostructures.author.ABB.TangentModulusData
-
Tangent modulus
- OF_TYPE - Static variable in class nxopen.ame.EditClauseBuilder.Operator
-
- OFF - Static variable in class nxopen.cae.BeamEADBuilder.EndReleaseSetting
-
end release set to off
- OFF - Static variable in class nxopen.cae.CaeElementAssociatedDataUtilsDof
-
- OFF - Static variable in class nxopen.cae.CaeElementAssociatedDataUtilsEndReleaseSetting
-
End release set to off.
- OFF - Static variable in class nxopen.cae.optimization.TBSSmoothBuilder.OriginalSurfaceSmoothingOption
-
No changes to the original surface
- OFF - Static variable in class nxopen.cae.optimization.TBSSmoothBuilder.ResultFiltering
-
Don't filter the element material values
- OFF - Static variable in class nxopen.cae.optimization.TBSSmoothBuilder.SelfIntersectionCheckingOption
-
No checks
- OFF - Static variable in class nxopen.cae.optimization.TBSTopologyControllerOptimizationParameters.AutoFrozen
-
Loaded elements are optimizable
- OFF - Static variable in class nxopen.cae.RigidEADBuilder.Dof
-
- OFF - Static variable in class nxopen.cam.CAMSetup.PostprocessSettingsReviewTool
-
not show the review tool window
- OFF - Static variable in class nxopen.cam.Cycle.CutMode
-
fixed cut distance off
- OFF - Static variable in class nxopen.cam.Cycle.DwellType
-
dwell off
- OFF - Static variable in class nxopen.cam.CycleDwell.Mode
-
dwell off
- OFF - Static variable in class nxopen.cam.CycleSpindle.Mode
-
spindle off
- OFF - Static variable in class nxopen.cam.InspectionAnalyzeBuilder.DofTypes
-
Off
- OFF - Static variable in class nxopen.cam.InspectionLinkPmiBuilder.CollisionAvoidanceEnumType
-
Collision avoidance will not be done
- OFF - Static variable in class nxopen.cam.InspectionLinkPmiBuilder.PathOrderTypes
-
No path order optimization will be done
- OFF - Static variable in class nxopen.cam.InspectionLinkPmiBuilder.PointOrderTypes
-
No point order optimization will be done
- OFF - Static variable in class nxopen.cam.InspectionMethodBuilder.AxisExtrapolationTypes
-
Do not extrapolate
- OFF - Static variable in class nxopen.cam.InspectionMethodBuilder.ToleranceDegreeOfFreedomMode
-
Off
- OFF - Static variable in class nxopen.cam.NcmScBuilder.SmoothingOptions
-
transfer smoothing deactivated
- OFF - Static variable in class nxopen.cam.Preferences.IpwDmrColoringTypes
-
Off
- OFF - Static variable in class nxopen.cam.SimulationOptionsBuilder.IpwEnable
-
no
- OFF - Static variable in class nxopen.cam.SurfaceContourBuilder.CleanupTypes
-
- OFF - Static variable in class nxopen.menubar.MenuButton.Toggle
-
The toggle is off.
- OFF - Static variable in class nxopen.motion.BodyContactAdams.CoulombFriction
-
- OFF - Static variable in class nxopen.motion.BodyContactLms.CoulombFriction
-
- OFF - Static variable in class nxopen.motion.BodyContactRecurdyn.CoulombFriction
-
- OFF - Static variable in class nxopen.motion.BodyContactSphereToCAD.CoulombFriction
-
- OFF - Static variable in class nxopen.motion.MotionEnvironment.AdoptAssemblyJointStatus
-
Adopt Assembly Joint is turned off
- OFF - Static variable in class nxopen.motion.MotionEnvironment.JointWizardStatus
-
Joint Wizard is turned off
- OFF - Static variable in class nxopen.pdm.PartOperationImportBuilder.Validation
-
- OFF - Static variable in class nxopen.preferences.PartVisualizationEmphasis.EdgesType
-
Displays no edges for de-emphasized shaded geometry.
- OFF - Static variable in class nxopen.preferences.PartVisualizationNamesBorders.NameDisplay
-
Display is Off
- OFF - Static variable in class nxopen.preferences.PartVisualizationShade.ShadedFaceEdge
-
Option is off
- OFF - Static variable in class nxopen.routing.RouteManager.BomBlankLines
-
- OFF - Static variable in class nxopen.routing.RouteManager.BomFabrication
-
- OFF - Static variable in class nxopen.routing.RouteManager.FixPosition
-
- OFF - Static variable in class nxopen.Sketch.CreateInferConstraintSetting
-
Dont create infer constraints
- OFF - Static variable in class nxopen.uf.UFMb.State
-
- OFF - Static variable in class nxopen.uf.UFPatt.Switch
-
- OFF - Static variable in class nxopen.userdefinedobjects.UserDefinedClass.AllowOwnedObjectSelection
-
You do NOT have permission to select objects owned by this class.
- OFF - Static variable in class nxopen.userdefinedobjects.UserDefinedClass.AllowQueryClass
-
You do NOT have permission to query the class from it's name.
- OFF - Static variable in class nxopen.userdefinedobjects.UserDefinedClass.Selection
-
UDO's of this class will NOT be selectable.
- OFF - Static variable in class nxopen.visualreporting.VisualReportExplorer.ExploreReportOption
-
Explore Visual Report results is off
- OFF_CENTERLINE - Static variable in class nxopen.cam.CenterlineDrillTurningBuilder.DrillingLocationTypes
-
Drilling Location: Off centerline
- OFF_SET_XX - Static variable in class nxopen.fields.DisplayPropertiesBuilder.BalStrainType
-
- OFF_SET_XY - Static variable in class nxopen.fields.DisplayPropertiesBuilder.BalStrainType
-
- OFF_SET_YY - Static variable in class nxopen.fields.DisplayPropertiesBuilder.BalStrainType
-
- OFF_SET_YZ - Static variable in class nxopen.fields.DisplayPropertiesBuilder.BalStrainType
-
- OFF_SET_ZX - Static variable in class nxopen.fields.DisplayPropertiesBuilder.BalStrainType
-
- OFF_SET_ZZ - Static variable in class nxopen.fields.DisplayPropertiesBuilder.BalStrainType
-
- offAxisAngleChoice() - Method in interface nxopen.cae.PreTestExciterConfigBuilder
-
Returns the off axis angle choice
License requirements: None.
- offCenterDistance() - Method in interface nxopen.cam.CenterlineDrillTurningBuilder
-
Returns the off center distance
License requirements: None.
- OFFCTRPT_CX - Static variable in class nxopen.uf.UFDrf.ValidClineForm
-
- OFFCTRPT_CY - Static variable in class nxopen.uf.UFDrf.ValidClineForm
-
- OFFCTRPT_FX - Static variable in class nxopen.uf.UFDrf.ValidClineForm
-
- OFFCTRPT_FY - Static variable in class nxopen.uf.UFDrf.ValidClineForm
-
- OFFCTRPT_NX - Static variable in class nxopen.uf.UFDrf.ValidClineForm
-
- OFFCTRPT_NY - Static variable in class nxopen.uf.UFDrf.ValidClineForm
-
- OFFCYL_CLINE_OBJ - Static variable in class nxopen.uf.UFDrf.ValidClineForm
-
- OFFCYL_CLINE_OFF - Static variable in class nxopen.uf.UFDrf.ValidClineForm
-
- offdir - Variable in class nxopen.routing.SplinePathBuilder.OffsetData
-
The offset direction.
- offendingDistance() - Method in interface nxopen.cae.qualityaudit.MeshLevelFailedProjectionToleranceResult
-
Returns the offending distance of the failing mesh projection.
- offset() - Method in interface nxopen.ame.GeneralAnnotationSettingsBuilder
-
Returns the text offset
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- OFFSET - Static variable in class nxopen.cae.BcLabelManagerBuilder.RenumberType
-
All the selected BC ID will offset by this number
- Offset() - Constructor for class nxopen.cae.BeamSectionOffsetOptions.Offset
-
- Offset(double, double, Expression, Expression, Expression) - Constructor for class nxopen.cae.BeamSectionOffsetOptions.Offset
-
Constructor for the Offset object.
- offset() - Method in interface nxopen.cae.DurabilityFunctionExcitationBuilder
-
Returns the offset.
- offset() - Method in interface nxopen.cae.DurabilityLoadPatternBuilder
-
Returns the offset.
- offset() - Method in interface nxopen.cae.ElementModifyLabelBuilder
-
Returns the offset
License requirements: None.
- OFFSET - Static variable in class nxopen.cae.ElementProjectBuilder.LabelType
-
offset
- offset() - Method in interface nxopen.cae.ElementProjectBuilder
-
Returns the offset
License requirements: None.
- OFFSET - Static variable in class nxopen.cae.ElementReflectBuilder.LabelType
-
by offset
- offset() - Method in interface nxopen.cae.ElementReflectBuilder
-
Returns the offset
License requirements: None.
- OFFSET - Static variable in class nxopen.cae.ElementRotateBuilder.LabelType
-
offset labels of selected element to get new labels
- offset() - Method in interface nxopen.cae.ElementRotateBuilder
-
Returns the offset to be used to generate new element labels
License requirements: None.
- OFFSET - Static variable in class nxopen.cae.ElementTranslateBuilder.LabelType
-
offset labels of selected element to get new labels
- offset() - Method in interface nxopen.cae.ElementTranslateBuilder
-
Returns the offset to be used to generate new element labels
License requirements: None.
- offset() - Method in interface nxopen.cae.LaminateRelabelPliesBuilder
-
Returns the offset value for the label offset option
License requirements: None.
- OFFSET - Static variable in class nxopen.cae.LaminateRelabelPliesBuilder.RelabelOptionEnum
-
Relabel by applying an offset to existing IDs
- offset() - Method in interface nxopen.cae.NodeModifyLabelBuilder
-
Returns the offset
License requirements: None.
- OFFSET - Static variable in class nxopen.cae.NodeProjectBuilder.LabelType
-
offset
- offset() - Method in interface nxopen.cae.NodeProjectBuilder
-
Returns the offset
License requirements: None.
- offset() - Method in interface nxopen.cae.NodeReflectBuilder
-
Returns the offset
License requirements: None.
- offset() - Method in interface nxopen.cae.NodeRotateBuilder
-
Returns the offset
License requirements: None.
- offset() - Method in interface nxopen.cae.NodeTranslateBuilder
-
Returns the offset
License requirements: None.
- OFFSET - Static variable in class nxopen.cae.SimBCDisplay.Mode
-
Set an offset display mode.
- offset() - Method in interface nxopen.cam.BoundaryMemberSet
-
Returns the offset value
License requirements: None.
- offset() - Method in interface nxopen.cam.BoundarySet
-
Returns the offset value
License requirements: None.
- OFFSET - Static variable in class nxopen.cam.InspectionConstructedFeatureBuilder.MethodEnumType
-
Creates a plane or line offset by a nominal amount to each subfeature
- OFFSET - Static variable in class nxopen.cam.PatternTypeBuilder.Option
-
Pattern is created by offsetting from one curve
- offset() - Method in interface nxopen.die.ClearanceBuilder
-
Returns the expression containing the offset value to apply to create a clearance area around the solid or closed profile definitions.
- offset() - Method in interface nxopen.die.FlangeSteelRibChildBuilder
-
Returns the offset of the Flange Steel Rib
License requirements: ug_die_design ("Die Design")
.
- offset() - Method in interface nxopen.die.FlangeSteelRibParentBuilder
-
Returns the offset of the Flange Steel Ribs
License requirements: ug_die_design ("Die Design")
.
- offset() - Method in interface nxopen.die.KeywayBuilder
-
Returns the amount to offset the keyway perpendicular to the slot orientation
License requirements: None.
- offset() - Method in interface nxopen.die.KeywayChildBuilder
-
Returns the offset of the keyway.
- offset() - Method in interface nxopen.die.MachineReliefBuilder
-
Returns the expression containing the value to apply for the thicken operation to create the tool solid.
- offset() - Method in interface nxopen.display.Stage
-
- offset() - Method in interface nxopen.drawings.SectionLineStyleBuilder
-
- offset() - Method in interface nxopen.drawings.ViewCopyTo3dBuilder
-
Returns the expression of clearance
License requirements: None.
- offset() - Method in interface nxopen.drawings.ViewPlacementBuilder
-
Returns the offset.
- offset() - Method in interface nxopen.drawings.ViewStyleDetailBuilder
-
Returns the offset toggle on the DETAIL tab of the View Style Dialog
License requirements: None.
- offset() - Method in interface nxopen.drawings.ViewStyleProjectedBuilder
-
Returns the projected view style offset toggle on the PROJECTED tab of the View Style Dialog
License requirements: None.
- offset() - Method in interface nxopen.drawings.ViewStyleSectionConstraintsBuilder
-
Returns the offset toggle on the SECTION CONSTRAINTS tab of the View Style Dialog
License requirements: None.
- offset() - Method in interface nxopen.EndCutBlockBuilder
-
Returns the offset
License requirements: None.
- OFFSET - Static variable in class nxopen.Face.FaceType
-
Offset face
- offset() - Method in interface nxopen.facet.ExtrudeFacetBodyBuilder
-
Returns the offset value used to offset the extruded body
License requirements: None.
- offset() - Method in interface nxopen.facet.ExtrudeProfileBuilder
-
Returns the offset used to offset the extruded body
License requirements: None.
- offset() - Method in interface nxopen.features.EdgeSymmetryBuilder
-
Returns the value indicating offset distance to be used with absolute principal symmetry plane
License requirements: None.
- OFFSET - Static variable in class nxopen.features.EmbossSidewall.SidewallMethod
-
(Not supported in NX4.)
- OFFSET - Static variable in class nxopen.features.ExtendSheetBuilder.Limit
-
Limit by offset distance
- offset() - Method in interface nxopen.features.ExtendSheetBuilder
-
Returns the offset distance to extend
License requirements: None.
- offset() - Method in interface nxopen.features.ExtrudeBuilder
-
Returns the extrude Offset operation
License requirements: None.
- OFFSET - Static variable in class nxopen.features.GeomcopyBuilder.TransformTypes
-
offset
- offset() - Method in interface nxopen.features.GlobalShapingCurveOffsetBuilder
-
Returns the target curve offset law
License requirements: None.
- offset() - Method in interface nxopen.features.GlobalShapingPointOffsetBuilder
-
Returns the target point offset
License requirements: None.
- offset() - Method in interface nxopen.features.LatticeBuilder
-
Returns the offset of the conformal lattice from the base face.
- OFFSET - Static variable in class nxopen.features.MidSurfaceByFacePairsBuilder.SurfaceType
-
Use offset
- OFFSET - Static variable in class nxopen.features.OvercrownBuilder.OperationType
-
- OFFSET - Static variable in class nxopen.features.RegionListItemBuilder.Type
-
- offset() - Method in interface nxopen.features.RevolveBuilder
-
Returns the revolve offset
License requirements: None.
- offset() - Method in interface nxopen.features.sheetmetal.ClosedCornerBuilder
-
Returns the value by which relief origin will be offset
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- OFFSET - Static variable in class nxopen.features.sheetmetal.DimpleBuilder.DimensionTypeOptions
-
the actual depth will be depth plus the thickness of sheet.
- offset() - Method in interface nxopen.features.sheetmetal.FlangeBendPropertiesBuilder
-
Returns the offset
License requirements: None.
- offset() - Method in interface nxopen.features.sheetmetal.FlangeBuilder
-
Returns the offset value for the flange.
- OFFSET - Static variable in class nxopen.features.sheetmetal.JogBuilder.DimensionTypeOptions
-
the actual depth will be depth plus the thickness of sheet.
- offset() - Method in interface nxopen.features.sheetmetal.ThreeBendCornerBuilder
-
Returns the offset used for circular, u and v cutout corner treatments.
- OFFSET - Static variable in class nxopen.features.ShelfBuilder.DepthMethods
-
- offset() - Method in interface nxopen.features.shipdesign.EdgeReinforcementBuilder
-
Returns the offset used for the offset distance from anchor point.
- offset() - Method in interface nxopen.features.shipdesign.EditStockBuilder
-
Returns the offset to apply to the current plate system mold face to produce the desired mold face.
- offset() - Method in interface nxopen.features.shipdesign.EndCutBuilder
-
Returns the offset.
- offset() - Method in interface nxopen.features.shipdesign.PenetrationAssociationBuilder
-
Returns the offset expression
License requirements: None.
- offset() - Method in interface nxopen.features.shipdesign.PenetrationCutoutBuilder
-
Returns the offset expression
License requirements: None.
- offset() - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder
-
Returns the offset expression
License requirements: None.
- offset() - Method in interface nxopen.features.shipdesign.PlateSystemBuilder
-
Returns the offset to apply to the selected mold face to produce the desired mold face.
- offset() - Method in interface nxopen.features.shipdesign.ReferenceLineBuilder
-
Returns the expression defining the offset to be applied to each grid plane before intersection.
- offset() - Method in interface nxopen.features.shipdesign.RollingLineBuilder
-
Returns the offset to be applied when marching along the surface to the next point.
- offset() - Method in interface nxopen.features.shipdesign.SectionViewBuilder
-
Returns the offset value
License requirements: None.
- OFFSET - Static variable in class nxopen.features.shipdesign.ShellTemplateBuilder.PlaneLocationTypes
-
Derive the plane locations from the orientation coordinate system or X and Y specified base planes
- offset() - Method in interface nxopen.features.shipdesign.SubSystemBuilder
-
Returns the offset to apply to the plate sub system mold face to produce the desired mold face.
- offset() - Method in interface nxopen.features.shipdesign.TraceLinesBuilder
-
Returns the offset
License requirements: None.
- OFFSET - Static variable in class nxopen.features.shipdesign.TraceLinesBuilder.TraceLineType
-
- offset() - Method in interface nxopen.features.vehicledesign.PendulumPlacementBuilder
-
Returns the side offset of this pendulum.
- offset() - Method in interface nxopen.fields.FieldProfileTable
-
Returns the offset
License requirements: None.
- offset() - Method in interface nxopen.geometricanalysis.sectionanalysis.CurveAlignedBuilder
-
Returns a value indicating the distance from the start position
License requirements: None.
- offset() - Method in interface nxopen.geometricanalysis.sectionanalysis.ParallelPlanesExBuilder
-
Returns a value indicating the distance from the start position
License requirements: None.
- offset() - Method in interface nxopen.geometricanalysis.sectionanalysis.RadialBuilder
-
Returns a value indicating the distance from the start position
License requirements: None.
- OFFSET - Static variable in class nxopen.geometricutilities.AlongPathPattern.PathOptions
-
path is an offset from the selected path.
- offset() - Method in interface nxopen.geometricutilities.FaceSetOffset
-
Returns the offset distance
License requirements: None.
- offset() - Method in interface nxopen.geometricutilities.FrameOnPathBuilder
-
Returns the offset
License requirements: None.
- OFFSET - Static variable in class nxopen.geometricutilities.PatternSpacing.SpacingType
-
Specify distance from the origin of one instance to the origin of the next instance.
- offset() - Method in interface nxopen.mechatronics.CurveOnCurveJointBuilder
-
Returns the offset specifies the "Zero Point" on the curve whose distance to the point along the curve is the offset value.
- offset() - Method in interface nxopen.mechatronics.CylindricalJointBuilder
-
Returns the offset value.
- offset() - Method in interface nxopen.mechatronics.PointOnCurveJointBuilder
-
Returns the offset specifies the "Zero Point" on the curve whose distance to the point along the curve is the offset value.
- offset() - Method in interface nxopen.mechatronics.SlidingJointBuilder
-
Returns the offset value.
- offset - Variable in class nxopen.mechatronics.TCPClientBuilder.Signal
-
Signal offset
- offset - Variable in class nxopen.mechatronics.TCPSignalServerBuilder.Signal
-
Adress value
- offset - Variable in class nxopen.mechatronics.UDPSignalClientBuilder.Signal
-
signal offset
- offset - Variable in class nxopen.mechatronics.UDPSignalServerBuilder.Signal
-
Adress value
- offset() - Method in interface nxopen.motion.PortAssociation
-
Returns the offset
License requirements: mechanisms ("MECHANISMS")
.
- Offset - Interface in nxopen
-
- offset() - Method in interface nxopen.routing.CrossSection
-
Returns the offset expression applied to the profile when generating a Sweep.
- OFFSET - Static variable in class nxopen.Sketch.ConstraintType
-
- offset() - Method in interface nxopen.tooling.CornerDesignBuilder
-
Returns the offset.
- OFFSET - Static variable in class nxopen.tooling.ElectrodeBlankBuilder.JointObject
-
create offset feature from joint face to blank
- offset - Variable in class nxopen.uf.UFAssem.Prev16Align
-
- offset - Variable in class nxopen.uf.UFCam.AskAutoBlankData
-
- offset - Variable in class nxopen.uf.UFCamgeom.AppData
-
- offset - Variable in class nxopen.uf.UFModl.RipedgeData
-
- offset - Variable in class nxopen.uf.UFModlFeatures.AskDatumPlaneParmsData
-
- offset - Variable in class nxopen.uf.UFModlFeatures.AskOffsetRegionData
-
- Offset.OnFaceOption - Class in nxopen
-
Specifies the offset direction in relation to a face.
- offset1() - Method in interface nxopen.features.ResizeChamferBuilder
-
Returns the offset1
License requirements: None.
- offset1 - Variable in class nxopen.uf.UFModl.SmholeData
-
- offset1 - Variable in class nxopen.uf.UFModl.SmslotData
-
- offset2() - Method in interface nxopen.features.ResizeChamferBuilder
-
Returns the offset2
License requirements: None.
- offset2 - Variable in class nxopen.uf.UFModl.SmholeData
-
- offset2 - Variable in class nxopen.uf.UFModl.SmslotData
-
- offset2dComponentEnabled() - Method in interface nxopen.features.CurveFinderBuilder
-
Returns a value that indicates whether add offset 2d component relation recognition for the last curves added to curve collector
License requirements: None.
- OFFSET3D_AXIAL - Static variable in class nxopen.uf.UFCurve.OffsetType
-
- Offset3DCurve - Interface in nxopen.features
-
Represents a offset 3D curve feature
To create or edit an instance of this class, use
Offset3DCurveBuilder
Created in NX10.0.0
- Offset3DCurveBuilder - Interface in nxopen.features
-
Represents a
Offset3DCurveBuilder
builder which implements
offset curves along a direction with offset distance in three dimension.
- offset3dDistance() - Method in interface nxopen.features.OffsetCurveBuilder
-
Returns the offset3d
License requirements: None.
- OFFSET_AND_ANGLE - Static variable in class nxopen.features.ChamferBuilder.ChamferOption
-
Offset distance and angle
- OFFSET_APPROXIMATION - Static variable in class nxopen.features.EmbossLimit.EndcapMethod
-
Indicates End-Cap geometry is formulated as an approximate offset of the selected End-Cap geometry
- OFFSET_AROUND_SHORT_GUIDE - Static variable in class nxopen.cam.PatternTypeBuilder.Option
-
Pattern is created by offsetting around one curve
- OFFSET_CIRCLE_POINT_TYPE - Static variable in class nxopen.uf.UFDrf.ObjectAssocPointType
-
- OFFSET_CSYS_PATTERN - Static variable in class nxopen.tooling.ReusePositioningObjectBuilder.Types
-
offset csys pattern mode
- OFFSET_CURVE - Static variable in class nxopen.cam.InspectionMethodBuilder.ScanCurveModeTypes
-
Offset curve
- OFFSET_CURVE_IN_FACE - Static variable in class nxopen.geometricutilities.SelectDividingObjectBuilder.ToolType
-
- OFFSET_DISTANCE_FILLET - Static variable in class nxopen.uf.UFCurve.OffsetType
-
- OFFSET_DISTANCE_LIMITED_TANGENT - Static variable in class nxopen.uf.UFCurve.OffsetType
-
- OFFSET_DISTANCE_NO_TRIM - Static variable in class nxopen.uf.UFCurve.OffsetType
-
- OFFSET_DISTANCE_TANGENT - Static variable in class nxopen.uf.UFCurve.OffsetType
-
- OFFSET_DRAFT_FILLET - Static variable in class nxopen.uf.UFCurve.OffsetType
-
- OFFSET_DRAFT_LIMITED_TANGENT - Static variable in class nxopen.uf.UFCurve.OffsetType
-
- OFFSET_DRAFT_NO_TRIM - Static variable in class nxopen.uf.UFCurve.OffsetType
-
- OFFSET_DRAFT_TANGENT - Static variable in class nxopen.uf.UFCurve.OffsetType
-
- OFFSET_EXACT - Static variable in class nxopen.features.EmbossLimit.EndcapMethod
-
Indicates End-Cap geometry is formulated as an exact offset of the selected End-Cap geometry.
- OFFSET_FACE - Static variable in class nxopen.features.StepBuilder.DepthMethods
-
Offsets the motion face to produce a step
- OFFSET_FLANGE - Static variable in class nxopen.die.SteelInsertBuilder.InsertTypeOption
-
offset_flange
- OFFSET_FLANGE - Static variable in class nxopen.die.SteelInsertSegmentChildBuilder.InsertTypeOption
-
offset_flange
- OFFSET_FLANGE - Static variable in class nxopen.die.SteelInsertSegmentParentBuilder.InsertTypeOption
-
offset_flange
- OFFSET_FROM_EDGE - Static variable in class nxopen.weld.JointmarkGuideBuilder.Location
-
Offset from Edge
- OFFSET_FROM_PART - Static variable in class nxopen.cam.GeometryGroup.BlankDefinitionTypes
-
blank defined through offset from part
- OFFSET_FROM_PART_TYPE - Static variable in class nxopen.uf.UFCam.BlankGeomType
-
- OFFSET_FROM_SHEET - Static variable in class nxopen.features.GlobalShapingBuilder.PointMethodType
-
Target point is offset from sheet
- OFFSET_FROM_START_DIAMETER - Static variable in class nxopen.cam.CylinderMillingBuilder.DiameterForHelixTypes
-
Offset from Start Diameter
- OFFSET_FROM_TEXT - Static variable in class nxopen.annotations.AssociativeOriginType
-
- OFFSET_GEOM - Static variable in class nxopen.uf.UFBrep.GeomType
-
- OFFSET_GUIDE_CURVE_ALONG_SKIN - Static variable in class nxopen.features.AeroFlangeBuilder.WidthMethods
-
- OFFSET_GUIDE_FACE - Static variable in class nxopen.features.AeroFlangeBuilder.WidthMethods
-
- OFFSET_OF_FACES - Static variable in class nxopen.uf.UFModl.OffsetTransType
-
- OFFSET_ORIGINAL_BODY - Static variable in class nxopen.features.VarOffsetFaceBuilder.Output
-
- OFFSET_PATH - Static variable in class nxopen.routing.CustomManager.CallbackReason
-
Called after the Offset Path command.
- OFFSET_PATH - Static variable in class nxopen.routing.CustomManager.DesignRuleReason
-
Called after the Offset Path command.
- OFFSET_PATH - Static variable in class nxopen.routing.DesignRuleViolationCollection.Reason
-
- OFFSET_PLANE - Static variable in class nxopen.cam.InspectionAlignmentAssistantBuilder.FeatureType
-
Offset Plane alignment feature type
- OFFSET_PLANES - Static variable in class nxopen.features.shipdesign.StiffenerSystemBuilder.Types
-
- OFFSET_STRAIN - Static variable in class nxopen.cae.Result.Quantity
-
- OFFSET_TOP_TYPE - Static variable in class nxopen.uf.UFModl.SmpunchTopType
-
- offsetAlignmentPosition - Variable in class nxopen.annotations.Annotation.AssociativeOriginData
-
Alignment position
on annotation to
align with.
- offsetAlignmentPosition - Variable in class nxopen.uf.UFDrf.AssociativeOrigin
-
- offsetAlongNormal() - Method in interface nxopen.weld.WeldBeadPathBuilder
-
Returns the offset along normal
License requirements: None.
- OFFSETAND_ANGLE - Static variable in class nxopen.features.ResizeChamferBuilder.SectionType
-
- OFFSETAND_ANGLE - Static variable in class nxopen.SketchChamferBuilder.ChamferOptions
-
OffsetandAngle - specify offset distance and angle
- offsetAngle() - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
Returns the offset angle of circular array.
- offsetAnnotation - Variable in class nxopen.annotations.Annotation.AssociativeOriginData
-
Annotation to align to.
- offsetAnnotation - Variable in class nxopen.uf.UFDrf.AssociativeOrigin
-
- OFFSETAS_NEW_BODY - Static variable in class nxopen.features.VarOffsetFaceBuilder.Output
-
- offsetAtA() - Method in interface nxopen.features.VariableOffsetBuilder
-
Returns the offset at corner A.
- offsetAtB() - Method in interface nxopen.features.VariableOffsetBuilder
-
Returns the offset at corner B.
- offsetAtC() - Method in interface nxopen.features.VariableOffsetBuilder
-
Returns the offset at corner C.
- offsetAtD() - Method in interface nxopen.features.VariableOffsetBuilder
-
Returns the offset at corner D.
- offsetBetweenDiagrams() - Method in interface nxopen.features.shipdesign.InverseBendingLinesBuilder
-
Returns the distance between the bottom of one table and the top of the next diagram.
- offsetBuilder() - Method in interface nxopen.cam.BoundaryTurnMemberSet
-
Returns the main offset
License requirements: None.
- OffsetCageBuilder - Interface in nxopen.features.subdivision
-
- offsetCenterPoint() - Method in interface nxopen.annotations.BaseRadialDimensionBuilder
-
Returns the offset center point
License requirements: None.
- OffsetCenterPoint - Interface in nxopen.annotations
-
Represents a offset center point
To create or edit an instance of this class, use
OffsetCenterPointBuilder
Created in NX6.0.0
- OffsetCenterPointBuilder - Interface in nxopen.annotations
-
- OffsetCenterPointBuilder.Display - Class in nxopen.annotations
-
the valid types of display styles
- OffsetCenterPointBuilder.Offset - Class in nxopen.annotations
-
the valid offset method types
- OffsetCenterPointBuilder.Thickness - Class in nxopen.annotations
-
the valid types of offset center point thickness
- OffsetCenterPointCollection - Interface in nxopen.annotations
-
- offsetCenterPoints() - Method in interface nxopen.annotations.AnnotationManager
-
OffsetCenterPoint collection .
- OffsetCollection - Interface in nxopen
-
Represents a collection of
Offset
.
- offsetCorner - Variable in class nxopen.uf.UFModl.SmreliefData
-
- offsetCsysFromQuick() - Method in interface nxopen.tooling.ReusePositioningObjectBuilder
-
Returns the offset datum CSYS from quick csys
License requirements: None.
- OffsetCurve - Interface in nxopen.features
-
Represents a offset curve feature
To create or edit an instance of this class, use
OffsetCurveBuilder
Created in NX5.0.0
- OffsetCurve3DBuilder - Interface in nxopen.tooling
-
- OffsetCurveBuilder - Interface in nxopen.features
-
- OffsetCurveBuilder.ComputeOffsetDirectionData - Class in nxopen.features
-
- OffsetCurveBuilder.TrimOption - Class in nxopen.features
-
Represents the Offset Curve trim option
- OffsetCurveBuilder.Types - Class in nxopen.features
-
Represents the Offset Curve types
- offsetCurveCount() - Method in interface nxopen.features.shipdesign.TraceLinesBuilder
-
Returns the offset curve count
License requirements: None.
- OffsetCurveCvtrData() - Constructor for class nxopen.uf.UFSo.OffsetCurveCvtrData
-
- OffsetCurveCvtrData(Tag, Tag) - Constructor for class nxopen.uf.UFSo.OffsetCurveCvtrData
-
- offsetCurveOnFace(String) - Method in interface nxopen.tooling.ReusePositioningObjectBuilder
-
Offset curve on the face
License requirements: None.
- offsetCurves() - Method in interface nxopen.features.GeodesicOffsetBuilder
-
Returns the curves to offset
License requirements: None.
- offsetCurves() - Method in interface nxopen.features.Offset3DCurveBuilder
-
Returns the curves to offset.
- offsetCurves() - Method in interface nxopen.tooling.OffsetCurve3DBuilder
-
- offsetCurves - Variable in class nxopen.uf.UFCurve.AskOffsetCurvesData
-
- offsetCurves - Variable in class nxopen.uf.UFCurve.OcfAskCurvesData
-
- offsetData() - Method in interface nxopen.cam.MoveToPointBuilder
-
Returns the offset point builder
License requirements: None.
- offsetData() - Method in interface nxopen.cam.RotaryPointMoveBuilder
-
Returns the offset point builder
License requirements: None.
- offsetData() - Method in interface nxopen.cam.RotaryPolarMoveBuilder
-
Returns the offset point builder
License requirements: None.
- offsetData() - Method in interface nxopen.cam.TurnMoveToPointBuilder
-
Returns the offset point builder
License requirements: None.
- OffsetData() - Constructor for class nxopen.routing.SplinePathBuilder.OffsetData
-
- OffsetDataBuilder - Interface in nxopen.cam
-
Represents the Offset Point Data Builder .
- OffsetDataBuilder.OffsetDirectionMethod - Class in nxopen.cam
-
the Offset Type
- offsetDatumCsys() - Method in interface nxopen.tooling.ReusePositioningObjectBuilder
-
Returns the offset datum CSYS
License requirements: None.
- offsetDeviation - Variable in class nxopen.uf.UFModl.RoughOffset
-
- offsetDimension() - Method in interface nxopen.features.ShelfBuilder
-
Returns the offset dimension
License requirements: None.
- offsetDir - Variable in class nxopen.routing.StockOffsetPointBuilder.PointData
-
- offsetDirection() - Method in interface nxopen.cam.OffsetDataBuilder
-
Returns the offsetDirection
License requirements: None.
- offsetDirection() - Method in interface nxopen.die.HeelpostBuilder
-
Returns the direction to apply to the location to determine the center of the heelpost
License requirements: None.
- offsetDirection() - Method in interface nxopen.features.GeodesicOffsetBuilder
-
Returns the offset direction
License requirements: None.
- offsetdirection - Variable in class nxopen.features.OffsetCurveBuilder.ComputeOffsetDirectionData
-
direction of offset
- offsetDirection() - Method in interface nxopen.features.VarOffsetFaceBuilder
-
Returns the offset direction
License requirements: None.
- offsetDirection() - Method in interface nxopen.geometricutilities.SelectDividingObjectBuilder
-
Returns the offset direction
License requirements: None.
- offsetDirection() - Method in interface nxopen.tooling.SlugRetentionBuilder
-
Returns the offset direction
License requirements: None.
- offsetDirection - Variable in class nxopen.uf.UFCurve.OcfOffsetPtDirectionData
-
- offsetDirection - Variable in class nxopen.uf.UFCurve.OcfStringData
-
- offsetDirectionOption() - Method in interface nxopen.features.AOCSBuilder
-
Returns the offset direction vector
License requirements: solid_modeling ("SOLIDS MODELING") OR insp_programming ("INSPECTION PROGRAMMING")
.
- offsetDirectionVector - Variable in class nxopen.uf.UFCurve.AskOffsetDirection2Data
-
- offsetDirectionVector - Variable in class nxopen.uf.UFCurve.AskOffsetDirectionData
-
- offsetDist() - Method in interface nxopen.cam.InspectionMeasDataBuilder
-
Returns the offset distance when adding measured data
License requirements: None.
- offsetDistance() - Method in interface nxopen.annotations.Centerline2dBuilder
-
Returns the offset distance for centerline by points
License requirements: None.
- offsetDistance() - Method in interface nxopen.annotations.Centerline3dBuilder
-
Returns the offset distance, it is used only when aligned centerlines
toggle is off
License requirements: None.
- offsetDistance() - Method in interface nxopen.cae.ConvexMeshBuilder
-
- offsetDistance() - Method in interface nxopen.cae.WeldBuilder
-
Returns the distance to offset the points from the edge(s)
License requirements: None.
- offsetDistance() - Method in interface nxopen.cam.InspectionArcFeatureBuilder
-
Returns the offset distance
License requirements: None.
- offsetDistance() - Method in interface nxopen.cam.InspectionCircleFeatureBuilder
-
Returns the offset distance
License requirements: None.
- offsetDistance() - Method in interface nxopen.cam.InspectionCparlnFeatureBuilder
-
Returns the offset distance
License requirements: None.
- offsetDistance() - Method in interface nxopen.cam.InspectionCurveFeatureBuilder
-
Returns the offset distance
License requirements: None.
- offsetDistance() - Method in interface nxopen.cam.InspectionLineFeatureBuilder
-
Returns the offset distance
License requirements: None.
- offsetDistance() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns the offset distance
License requirements: None.
- offsetDistance() - Method in interface nxopen.cam.OffsetDataBuilder
-
Returns the offsetDistance
License requirements: None.
- offsetDistance() - Method in interface nxopen.die.OutputCurvesBuilder
-
Returns the offset distance
License requirements: die_engineering ("DIE ENGINEERING")
.
- offsetDistance() - Method in interface nxopen.facet.LocalOffsetBuilder
-
Returns the linear distance of the created local offset, which may be a positive or negative distance
License requirements: None.
- offsetDistance() - Method in interface nxopen.features.GeodesicOffsetBuilder
-
Returns the distance to offset
License requirements: None.
- offsetDistance() - Method in interface nxopen.features.Offset3DCurveBuilder
-
Returns the distance by which to offset the curves.
- offsetDistance() - Method in interface nxopen.features.OffsetCurveBuilder
-
Returns the distance
License requirements: None.
- offsetDistance() - Method in interface nxopen.features.RegionListItemBuilder
-
Returns the offset distance
License requirements: None.
- offsetDistance() - Method in interface nxopen.features.ReplaceFaceBuilder
-
Returns the offset distance of replacement faces
License requirements: None.
- offsetDistance() - Method in interface nxopen.features.RibbonBuilder
-
Returns the distance to offset the profile
License requirements: None.
- offsetDistance() - Method in interface nxopen.features.shipdesign.ExcessMaterialBuilder
-
- offsetDistance() - Method in interface nxopen.features.shipdesign.StiffenerSystemBuilder
-
Returns the distance from the OffsetPlane to generate the first plane.
- offsetDistance() - Method in interface nxopen.features.subdivision.OffsetCageBuilder
-
Returns the offset distance.
- offsetDistance() - Method in interface nxopen.geometricutilities.SelectDividingObjectBuilder
-
Returns the offset distance
License requirements: None.
- offsetDistance() - Method in interface nxopen.tooling.OffsetCurve3DBuilder
-
- offsetDistance() - Method in interface nxopen.tooling.SlugRetentionBuilder
-
Returns the offset distance
License requirements: None.
- offsetDistance - Variable in class nxopen.uf.UFModl.RoughOffset
-
- offsetDistance - Variable in class nxopen.uf.UFModl.SmreliefData
-
- offsetDistance() - Method in interface nxopen.weld.JointmarkGuideBuilder
-
Returns the offset distance.
- offsetDistance() - Method in interface nxopen.weld.WeldPointBuilder
-
Returns the offset distance from edges in guide_collector1 to place weld points
License requirements: ugweld ("UG WELD")
.
- offsetDistanceEnd() - Method in interface nxopen.features.shipdesign.StiffenerSystemBuilder
-
Returns the distance from the OffsetPlane to generate the location at the end of the stiffener system.
- offsetDistanceFromEdge() - Method in interface nxopen.weld.AutoPointBuilder
-
Returns the offset distance from edge
License requirements: None.
- offsetDistances - Variable in class nxopen.uf.UFCurve.OcfStringData
-
- offsetDistanceStart() - Method in interface nxopen.features.shipdesign.StiffenerSystemBuilder
-
Returns the distance from the OffsetPlane to generate the location at the start of the stiffener system.
- offsetDistType() - Method in interface nxopen.features.AOCSBuilder
-
Returns the offset distance type
License requirements: solid_modeling ("SOLIDS MODELING") OR insp_programming ("INSPECTION PROGRAMMING")
.
- OffsetEdge - Interface in nxopen.features
-
Represents a offset edge feature
To create or edit an instance of this class, use
OffsetEdgeBuilder
Created in NX9.0.0
- OffsetEdgeBuilder - Interface in nxopen.features
-
- OffsetEdgeBuilder.EndFaceBehaviourType - Class in nxopen.features
-
the end face behavior settings enumeration
- OffsetEdgeBuilder.OffsetEdgeMethod - Class in nxopen.features
-
the offset edge method enumeration
- OffsetEmboss - Interface in nxopen.features
-
Represents an offset emboss feature
To create or edit an instance of this class, use
OffsetEmbossBuilder
Created in NX5.0.0
- OffsetEmbossBuilder - Interface in nxopen.features
-
Represents a builder for an offset emboss feature.
- OffsetEmbossBuilder.Types - Class in nxopen.features
-
Enumeration of center types .
- offsetEnabled() - Method in interface nxopen.features.CurveFinderBuilder
-
Returns a value that indicates whether add offset relation recognition for the last curves added to curve collector
License requirements: None.
- offsetEnabled() - Method in interface nxopen.features.FaceRecognitionBuilder
-
Returns a value that indicates whether symmetric relation recognition is enabled
License requirements: None.
- offsetEndAngle() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns the offset from end angle
License requirements: None.
- offsetEndAngle() - Method in interface nxopen.cam.InspectionPolarGridBuilder
-
Returns the offset in degrees from end vector
License requirements: None.
- offsetExpression() - Method in interface nxopen.display.EnvironmentBuilder
-
Returns the environment offset expression
License requirements: studio_render ("UG STUDIO RENDER")
.
- offsetExpression() - Method in interface nxopen.display.Stage
-
Returns the stage offset expression
License requirements: None.
- offsetExpression() - Method in interface nxopen.IPlane
-
Returns the plane offset expression.
- offsetExpression() - Method in interface nxopen.positioning.Constraint
-
Returns
the offset of a constraint.
- offsetExpression - Variable in class nxopen.routing.StockOffsetPointBuilder.PointData
-
- OffsetFace - Interface in nxopen.features
-
Represents a offset face feature
To create or edit an instance of this class, use
OffsetFaceBuilder
Created in NX5.0.0
- OffsetFaceBuilder - Interface in nxopen.features
-
- offsetFaces - Variable in class nxopen.uf.UFModlFeatures.AskHollowData
-
- OffsetFacetBody - Interface in nxopen.features
-
Represents a offset facet body feature
To create or edit an instance of this class, use
OffsetFacetBodyBuilder
Created in NX12.0.0
- OffsetFacetBodyBuilder - Interface in nxopen.features
-
- offsetFileName() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
Returns the name of the file containing the offset data of the envelope sections.
- offsetFlip() - Method in interface nxopen.IPlane
-
Returns the flip state of the offset direction of the plane
License requirements: None.
- offsetFromPart() - Method in interface nxopen.cam.GeometryGroup
-
Returns the blank offset from part
License requirements: None.
- offsetFromStartDiameter() - Method in interface nxopen.cam.CylinderMillingBuilder
-
Returns the Offset from Start Diameter
License requirements: None.
- offsetFromStartDiameter() - Method in interface nxopen.cam.RadialGrooveMillingBuilder
-
Returns the Offset from Start Diameter
License requirements: None.
- offsetInFace() - Method in interface nxopen.weld.WeldBeadPathBuilder
-
Returns the expression containing the distance to offset the path normal to the face.
- offsetInstance() - Method in interface nxopen.features.DatumPlaneBuilder
-
Returns the offset instance plane flag
License requirements: None.
- offsetIntent() - Method in interface nxopen.cam.BoundarySet
-
Returns the offset intent
License requirements: None.
- offsetLeft - Variable in class nxopen.uf.UFUi.Attachment
-
- OffsetLimitsData() - Constructor for class nxopen.display.DynamicSectionBuilder.OffsetLimitsData
-
- offsetLinearDimension() - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder
-
Returns the offset linear dimension
License requirements: None.
- offsetLinearDimension() - Method in interface nxopen.tooling.PiercingInsertBuilder
-
Returns the offset linear dimension
License requirements: None.
- offsetLinearDimension() - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder
-
Returns the offset linear dimension
License requirements: None.
- offsetMatrix() - Method in interface nxopen.cam.RobotCartesianMove
-
Returns the coordinate system matrix
License requirements: cam_base ("CAM BASE")
.
- offsetMaximumRadius() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns the offset from maximum radius
License requirements: None.
- offsetMaximumRadius() - Method in interface nxopen.cam.InspectionPolarGridBuilder
-
Returns the offset from maximum radius
License requirements: None.
- offsetMethod() - Method in interface nxopen.annotations.Centerline2dBuilder
-
Returns the offset method for centerline by points
License requirements: None.
- offsetMethod() - Method in interface nxopen.annotations.Centerline3dBuilder
-
Returns the offset method , it is used only when aligned centerlines
toggle is off
License requirements: None.
- offsetMethod() - Method in interface nxopen.annotations.OffsetCenterPointBuilder
-
Returns the offset method
License requirements: None.
- offsetMethod() - Method in interface nxopen.cae.ConvexMeshBuilder
-
- offsetMethod - Variable in class nxopen.uf.UFCurve.OcfData
-
- offsetMethod() - Method in interface nxopen.weld.WeldBeadPathBuilder
-
Returns the desired path offset method.
- offsetMethodType() - Method in interface nxopen.cae.BeamSectionOffsetOptions
-
Returns the method to define beam end offsets
License requirements: None.
- offsetMinimumRadius() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns the offset from minimum radius
License requirements: None.
- offsetMinimumRadius() - Method in interface nxopen.cam.InspectionPolarGridBuilder
-
Returns the offset from minimum radius
License requirements: None.
- offsetMode() - Method in interface nxopen.features.AOCSBuilder
-
Returns the offset mode for the AOCS operation.
- OffsetMoveCurve - Interface in nxopen.features
-
Represents a offset move curve feature
To create or edit an instance of this class, use
OffsetMoveCurveBuilder
Created in NX9.0.0
- OffsetMoveCurveBuilder - Interface in nxopen.features
-
- offsetName - Variable in class nxopen.uf.UFAssem.Prev16Align
-
- offsetNegativeX() - Method in interface nxopen.features.ToolingBoxBuilder
-
Returns the offset value for box in -X direction.
- offsetNegativeX() - Method in interface nxopen.tooling.CreateBoxBuilder
-
Returns the offset value for box in -X direction.
- offsetNegativeX() - Method in interface nxopen.tooling.StockSizeBuilder
-
Returns the clearance value for the blank in -X direction.
- offsetNegativeY() - Method in interface nxopen.features.ToolingBoxBuilder
-
Returns the offset value for box in -Y direction.
- offsetNegativeY() - Method in interface nxopen.tooling.CreateBoxBuilder
-
Returns the offset value for box in -Y direction.
- offsetNegativeY() - Method in interface nxopen.tooling.StockSizeBuilder
-
Returns the clearance value for the blank in -Y direction.
- offsetNegativeZ() - Method in interface nxopen.cam.GeometryGroup
-
Returns the bounding geometry offset along negative Z axis
License requirements: None.
- offsetNegativeZ() - Method in interface nxopen.features.ToolingBoxBuilder
-
Returns the offset value for box in -Z direction.
- offsetNegativeZ() - Method in interface nxopen.tooling.CreateBoxBuilder
-
Returns the offset value for box in -Z direction.
- offsetNegativeZ() - Method in interface nxopen.tooling.StockSizeBuilder
-
Returns the clearance value for the blank in -Z direction.
- offsetNumber() - Method in interface nxopen.features.shipdesign.StiffenerSystemBuilder
-
Returns the number of offset planes to generate that define the path of the stiffener system.
- offsetObject() - Method in interface nxopen.annotations.Centerline2dBuilder
-
Returns the offset object for centerline by points
License requirements: None.
- offsetObject() - Method in interface nxopen.annotations.Centerline3dBuilder
-
Returns the offset object, it is used only when aligned centerlines
toggle is off
License requirements: None.
- OFFSETOF_STEP_FACE - Static variable in class nxopen.features.StepBuilder.StepWallMethods
-
Makes the step-wall face offset from the step face
- offsetOption() - Method in interface nxopen.features.shipdesign.PlateChamferBuilder
-
Returns the offset option
License requirements: None.
- offsetOrigin() - Method in interface nxopen.cam.RobotCartesianMove
-
Returns the coordinate system origin
License requirements: cam_base ("CAM BASE")
.
- offsetOriginInPlane(double, double) - Method in interface nxopen.display.DynamicSectionBuilder
-
Offsets section origin within current section plane.
- offsetOuterDistance() - Method in interface nxopen.tooling.ShimBuilder
-
Returns the offset distance of outer loop
License requirements: None.
- OffsetPath - Interface in nxopen.routing
-
The Routing OffsetPath object is the set of information needed to define an offset route.
- OffsetPath.OffsetReferenceAxesData - Class in nxopen.routing
-
- OffsetPathCollection - Interface in nxopen.routing
-
The Routing OffsetPath object is a list of segments in a route.
- OffsetPathCollection.BendType - Class in nxopen.routing
-
Bend types for offset path creation
- OffsetPathCollection.CreateCircularOffsetPathData - Class in nxopen.routing
-
This class holds the data returned from
OffsetPathCollection.createCircularOffsetPath(nxopen.routing.ISegment[], boolean, nxopen.routing.Stock[], boolean, boolean, nxopen.routing.OffsetPathCollection.BendType, boolean, double, double, boolean, boolean, nxopen.Vector3d, nxopen.Vector3d, nxopen.Point3d, double, double, int, double)
- OffsetPathCollection.CreateRectangularOffsetPathData - Class in nxopen.routing
-
This class holds the data returned from
OffsetPathCollection.createRectangularOffsetPath(nxopen.routing.ISegment[], boolean, nxopen.routing.Stock[], boolean, boolean, nxopen.routing.OffsetPathCollection.BendType, boolean, double, double, boolean, boolean, nxopen.Vector3d, nxopen.Vector3d, nxopen.Point3d, double, double, double, int, int, int, int)
- offsetPaths() - Method in interface nxopen.routing.RouteManager
-
OffsetPath Collection .
- offsetPlane() - Method in interface nxopen.features.shipdesign.StiffenerSystemBuilder
-
Returns the first plane of the set of offset planes that define the path of the stiffener system.
- offsetPoint - Variable in class nxopen.uf.UFCurve.OcfOffsetPtDirectionData
-
- offsetPosition() - Method in interface nxopen.annotations.OffsetCenterPointBuilder
-
Returns the offset position, valid for position offset methods
License requirements: None.
- offsetposition - Variable in class nxopen.drawings.ViewBreak.ViewBreakDisplayableObjectsAndOffsetsData
-
- offsetPositionDx() - Method in interface nxopen.tooling.StandardPartPositionBuilder
-
Returns the dimension in X direction from reference point to offset point.
- offsetPositionDy() - Method in interface nxopen.tooling.StandardPartPositionBuilder
-
Returns the dimension in Y direction from reference point to offset point.
- offsetPositioningFeature(double) - Method in interface nxopen.tooling.FastenerAssy
-
Offset the positioning feature
License requirements: None.
- offsetPositiveX() - Method in interface nxopen.features.ToolingBoxBuilder
-
Returns the offset value for box in +X direction.
- offsetPositiveX() - Method in interface nxopen.tooling.CreateBoxBuilder
-
Returns the offset value for box in +X direction.
- offsetPositiveX() - Method in interface nxopen.tooling.StockSizeBuilder
-
Returns the clearance value for the blank in +X direction.
- offsetPositiveY() - Method in interface nxopen.features.ToolingBoxBuilder
-
Returns the offset value for box in +Y direction.
- offsetPositiveY() - Method in interface nxopen.tooling.CreateBoxBuilder
-
Returns the offset value for box in +Y direction.
- offsetPositiveY() - Method in interface nxopen.tooling.StockSizeBuilder
-
Returns the clearance value for the blank in +Y direction.
- offsetPositiveZ() - Method in interface nxopen.cam.GeometryGroup
-
Returns the bounding geometry offset along positive Z axis
License requirements: None.
- offsetPositiveZ() - Method in interface nxopen.features.ToolingBoxBuilder
-
Returns the offset value for box in +Z direction.
- offsetPositiveZ() - Method in interface nxopen.tooling.CreateBoxBuilder
-
Returns the offset value for box in +Z direction.
- offsetPositiveZ() - Method in interface nxopen.tooling.StockSizeBuilder
-
Returns the clearance value for the blank in +Z direction.
- offsetProfileToTop() - Method in interface nxopen.die.DrawDiePunchSectionBuilder
-
Returns the offset profile to top distance of the draw die punch casting.
- offsetProfileToTop() - Method in interface nxopen.die.SteelInsertSectionBuilder
-
Returns the offset of the profile to the top of the steel insert casting
License requirements: ug_die_design ("Die Design")
.
- offsetRadius() - Method in interface nxopen.features.sheetmetal.JoggleSideOptionsBuilder
-
Returns the offset radius
License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- OffsetReferenceAxesData() - Constructor for class nxopen.routing.OffsetPath.OffsetReferenceAxesData
-
- OffsetRegion - Interface in nxopen.features
-
Represents an offset region feature , don't use it until nx502
To create or edit an instance of this class, use
OffsetRegionBuilder
Created in NX5.0.2
- OffsetRegionBuilder - Interface in nxopen.features
-
Represents a builder for an offset region feature, don't use it until nx502.
- offsetRelations() - Method in interface nxopen.features.ShowRelatedFacesBuilder
-
Returns the value indicating whether to keep offset relations or not
License requirements: None.
- offsetReverseDirection() - Method in interface nxopen.features.ReplaceFaceBuilder
-
Returns the offset reverse direction flag of replacement faces
License requirements: None.
- offsetRight - Variable in class nxopen.uf.UFUi.Attachment
-
- offsetRightHandSide() - Method in interface nxopen.positioning.Constraint
-
Returns
the offset right hand side of a constraint.
- offsets() - Method in interface nxopen.BasePart
-
Returns the OffsetCollection instance belonging to this part .
- OFFSETS - Static variable in class nxopen.cam.CutBand.Types
-
Offsets
- OFFSETS - Static variable in class nxopen.cam.ProbeCalibrateStylusMoveBuilder.CalibrateStylusType
-
Stylus offsets
- offsets() - Method in interface nxopen.features.AOCSBuilder
-
Returns the list of offsets.
- offsets - Variable in class nxopen.uf.UFAssem.McArrayData
-
- offsets - Variable in class nxopen.uf.UFModl.AskExtrusionData
-
- offsets - Variable in class nxopen.uf.UFModl.AskRevolutionData
-
- OFFSETS_ALONG_TOOL_AXIS - Static variable in class nxopen.cam.BladeCutLevels.DepthModeTypes
-
Offsets along Tool Axis
- OFFSETS_FROM_HUB - Static variable in class nxopen.cam.BladeCutLevels.DepthModeTypes
-
Offsets from Hub
- OFFSETS_FROM_SHROUD - Static variable in class nxopen.cam.BladeCutLevels.DepthModeTypes
-
Offsets from Shroud
- offsetSectionCentroidAtAftEnd() - Method in interface nxopen.cae.BeamElementInfo
-
Returns the new position with offset of the section centroid at the aft end of the beam element in the global coordinate system.
- offsetSectionCentroidAtForeEnd() - Method in interface nxopen.cae.BeamElementInfo
-
Returns the new position with offset of the section centroid at the fore end of the beam element in the global coordinate system.
- offsetSectionShearCenterAtAftEnd() - Method in interface nxopen.cae.BeamElementInfo
-
Returns the new position with offset of the section shear center at the aft end of the beam element in the global coordinate system.
- offsetSectionShearCenterAtForeEnd() - Method in interface nxopen.cae.BeamElementInfo
-
Returns the new position with offset of the section shear center at the fore end of the beam element in the global coordinate system.
- offsetSketchGroupEnabled() - Method in interface nxopen.features.CurveFinderBuilder
-
Returns a value that indicates whether add offset relation recognition for the last curves added to curve collector
License requirements: None.
- offsetSkewRatio() - Method in interface nxopen.geometricutilities.ConicCrossSection
-
Returns the offset skew ratio expression for the conic section with face blend
License requirements: None.
- offsetSolid() - Method in interface nxopen.features.VarOffsetFaceBuilder
-
Returns the offset solid
License requirements: None.
- offsetSpacing() - Method in interface nxopen.features.shipdesign.StiffenerSystemBuilder
-
Returns the distance between generated planes.
- offsetSpacingEnd() - Method in interface nxopen.features.shipdesign.StiffenerSystemBuilder
-
Returns the distance between generated locations at the end of the stiffener system.
- offsetSpacingMode() - Method in interface nxopen.features.shipdesign.StiffenerSystemBuilder
-
Returns the indication whether spacing of the offset planes is defined at each end of the stiffener system,
or if a constant spacing is desired.
- offsetSpacingStart() - Method in interface nxopen.features.shipdesign.StiffenerSystemBuilder
-
Returns the distance between generated locations at the start of the stiffener system.
- offsetSpreadsheet() - Method in interface nxopen.tooling.PunchInsertBuilder
-
Returns the offset spreadsheet
License requirements: None.
- offsetStartAngle() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns the offset from start angle
License requirements: None.
- offsetStartAngle() - Method in interface nxopen.cam.InspectionPolarGridBuilder
-
Returns the offset in degrees from start vector
License requirements: None.
- OffsetSurface - Interface in nxopen.features
-
Represents a offset surface feature.
- OffsetSurfaceBuilder - Interface in nxopen.features
-
This class represents a offset surface builder, used for creating or editing an
offset surface feature.
- OffsetSurfaceBuilder.OrientationMethodType - Class in nxopen.features
-
Represents the type of orientation method.
- OffsetSurfaceBuilder.OutputOptionType - Class in nxopen.features
-
Represents the type of output option.
- OffsetSurfCvtrData() - Constructor for class nxopen.uf.UFSo.OffsetSurfCvtrData
-
- OffsetSurfCvtrData(Tag, Tag[], int, Tag) - Constructor for class nxopen.uf.UFSo.OffsetSurfCvtrData
-
- offsetThickness - Variable in class nxopen.uf.UFModlFeatures.AskHollowData
-
- offsetToBar - Variable in class nxopen.uf.UFDrf.GetTextBarsData
-
- offsetTop - Variable in class nxopen.uf.UFUi.Attachment
-
- offsetType() - Method in interface nxopen.cam.OffsetDataBuilder
-
Returns the OffsetType
License requirements: None.
- offsetType() - Method in interface nxopen.cam.VerticalPosition
-
Returns the offset type
License requirements: None.
- offsetType() - Method in interface nxopen.features.sheetmetal.FlangeBuilder
-
Returns the offset type for the flange.
- offsetType() - Method in interface nxopen.features.shipdesign.ExcessMaterialBuilder
-
Returns the offset type (only applicable for excess material, fitup will ignore the offset type)
License requirements: None.
- offsetType() - Method in interface nxopen.features.shipdesign.TraceLinesBuilder
-
Returns the offset type
License requirements: None.
- offsettype - Variable in class nxopen.uf.UFCamgeom.AppData
-
- offsetvalue - Variable in class nxopen.cae.SetManager.TargetSetPlaneWithOffsetData
-
offset value that was used to construct the plane.
- offsetValue() - Method in interface nxopen.cam.InspectionEdgePointFeatureBuilder
-
Returns the point offset value
License requirements: None.
- offsetValue() - Method in interface nxopen.features.MakeOffsetBuilder
-
Returns the offset value
License requirements: None.
- offsetValue() - Method in interface nxopen.mechatronics.ExternalConnectionElementBuilder
-
Returns the offset value.
- offsetValue() - Method in interface nxopen.tooling.DieDesignLowerBinderBuilder
-
Returns the offset value
License requirements: ug_die_design ("Die Design")
.
- offsetValue() - Method in interface nxopen.tooling.EjectorPostProcessingBuilder
-
Returns the offset value is used to create offset feature on the trimmed ejector pin true body.
- offsetValue() - Method in interface nxopen.tooling.ReusePositioningObjectBuilder
-
Returns the offset value of pattern
License requirements: None.
- offsetValue - Variable in class nxopen.uf.UFAssem.Prev16Align
-
- offsetValueForMargin() - Method in interface nxopen.tooling.AutoDimensionBuilder
-
Returns the offset value of margins
License requirements: None.
- offsetValueLinearDimension() - Method in interface nxopen.tooling.BackingPadBuilder
-
Returns the offset value linear dimension
License requirements: None.
- offsetValueLinearDimensionNegativeX() - Method in interface nxopen.tooling.BackingPadBuilder
-
Returns the offset value linear dimension negative x
License requirements: None.
- offsetValueLinearDimensionNegativeX() - Method in interface nxopen.tooling.DieInsertBuilder
-
Returns the offset value linear dimension negative x
License requirements: None.
- offsetValueLinearDimensionNegativeX() - Method in interface nxopen.tooling.SpecialFormingBuilder
-
Returns the offset value linear dimension negative x
License requirements: None.
- offsetValueLinearDimensionNegativeX() - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder
-
Returns the offset value linear dimension negative x
License requirements: None.
- offsetValueLinearDimensionNegativeY() - Method in interface nxopen.tooling.BackingPadBuilder
-
Returns the offset value linear dimension negative y
License requirements: None.
- offsetValueLinearDimensionNegativeY() - Method in interface nxopen.tooling.DieInsertBuilder
-
Returns the offset value linear dimension negative y
License requirements: None.
- offsetValueLinearDimensionNegativeY() - Method in interface nxopen.tooling.SpecialFormingBuilder
-
Returns the offset value linear dimension negative y
License requirements: None.
- offsetValueLinearDimensionNegativeY() - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder
-
Returns the offset value linear dimension negative y
License requirements: None.
- offsetValueLinearDimensionNegativeZ() - Method in interface nxopen.tooling.DieInsertBuilder
-
Returns the offset value linear dimension negative z
License requirements: None.
- offsetValueLinearDimensionNegativeZ() - Method in interface nxopen.tooling.SpecialFormingBuilder
-
Returns the offset value linear dimension negative z
License requirements: None.
- offsetValueLinearDimensionNegativeZ() - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder
-
Returns the offset value linear dimension negative z
License requirements: None.
- offsetValueLinearDimensionPositiveX() - Method in interface nxopen.tooling.BackingPadBuilder
-
Returns the offset value linear dimension positive x
License requirements: None.
- offsetValueLinearDimensionPositiveX() - Method in interface nxopen.tooling.DieInsertBuilder
-
Returns the offset value linear dimension positive x
License requirements: None.
- offsetValueLinearDimensionPositiveX() - Method in interface nxopen.tooling.SpecialFormingBuilder
-
Returns the offset value linear dimension positive x
License requirements: None.
- offsetValueLinearDimensionPositiveX() - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder
-
Returns the offset value linear dimension positive x
License requirements: None.
- offsetValueLinearDimensionPositiveY() - Method in interface nxopen.tooling.BackingPadBuilder
-
Returns the offset value linear dimension positive y
License requirements: None.
- offsetValueLinearDimensionPositiveY() - Method in interface nxopen.tooling.DieInsertBuilder
-
Returns the offset value linear dimension positive y
License requirements: None.
- offsetValueLinearDimensionPositiveY() - Method in interface nxopen.tooling.SpecialFormingBuilder
-
Returns the offset value linear dimension positive y
License requirements: None.
- offsetValueLinearDimensionPositiveY() - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder
-
Returns the offset value linear dimension positive y
License requirements: None.
- offsetValueLinearDimensionPositiveZ() - Method in interface nxopen.tooling.DieInsertBuilder
-
Returns the offset value linear dimension positive z
License requirements: None.
- offsetValueLinearDimensionPositiveZ() - Method in interface nxopen.tooling.SpecialFormingBuilder
-
Returns the offset value linear dimension positive z
License requirements: None.
- offsetValueLinearDimensionPositiveZ() - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder
-
Returns the offset value linear dimension positive z
License requirements: None.
- offsetVector() - Method in interface nxopen.cae.WeldBuilder
-
Returns the vector along which to offset the points
License requirements: None.
- offsetVector() - Method in interface nxopen.cam.OffsetDataBuilder
-
Returns the offsetVector
License requirements: None.
- offsetVector() - Method in interface nxopen.routing.OffsetPath
-
Returns the vector for an offset object.
- offsetView() - Method in interface nxopen.features.RibbonBuilder
-
Returns the direction normal to the offset
License requirements: None.
- offsetViewDirection() - Method in interface nxopen.features.Offset3DCurveBuilder
-
Returns the reference direction from which to get the offset direction.
- offsetViewDirection() - Method in interface nxopen.tooling.OffsetCurve3DBuilder
-
- offsetWidth() - Method in interface nxopen.die.ClampingSlotBuilder
-
Returns the width of the additional flange casting added for pad support
License requirements: None.
- offsetX - Variable in class nxopen.cae.BeamSectionOffsetOptions.Offset
-
The expression to define offset in X component
- offsetX() - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
Returns the offset value along X.
- offsetY - Variable in class nxopen.cae.BeamSectionOffsetOptions.Offset
-
The expression to define offset in Y component
- offsetY() - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
Returns the offset value along Y.
- offsetZ - Variable in class nxopen.cae.BeamSectionOffsetOptions.Offset
-
The expression to define offset in Z component
- OffSheetConnector - Interface in nxopen.pid
-
Represents the off sheet connector class.
- offSheetConnector() - Method in interface nxopen.pid.PreferencesBuilder
-
Returns the preferences offsheetconnector builder
License requirements: nx_pid_design_reader ("NX P and ID Design Reader") OR nx_pid_design_author ("NX P and ID Design Author")
.
- OffSheetConnectorBuilder - Interface in nxopen.pid
-
Builder used to model a piece of Off Sheet Connector.
- OffSheetConnectorBuilder.ConnectionData - Class in nxopen.pid
-
- OffSheetConnectorBuilder.StyleOption - Class in nxopen.pid
-
the style of OSC elements.
- offsheetReference() - Method in interface nxopen.diagramming.NodeBuilder
-
Returns the referenced offsheet node.
- ofsy - Variable in class nxopen.cae.aerostructures.author.ABB.MaterialFsyEstimationData
-
Shear yield stress
- OGDEN - Static variable in class nxopen.PhysicalMaterial.Type
-
Ogden
- OGDENTESTDATA - Static variable in class nxopen.PhysicalMaterial.Type
-
Ogden - test data option
- OIL_TIGHT - Static variable in class nxopen.features.shipdesign.PlateBuilder.TightnessOptions
-
- OilPan - Interface in nxopen.features.vehicledesign
-
Represents a oil pan feature
To create or edit an instance of this class, use
OilPanBuilder
Created in NX8.5.0
- OilPanBuilder - Interface in nxopen.features.vehicledesign
-
Represents a
OilPan
builder to create and edit a vehicle design oil pan.
- OilPanBuilder.PositionType - Class in nxopen.features.vehicledesign
-
Represents the oil pan positions.
- OilPanBuilder.RequirementsControlType - Class in nxopen.features.vehicledesign
-
Represents the requirements control types to define the oil pan.
- OilPanBuilder.VisualizationType - Class in nxopen.features.vehicledesign
-
Represents the visualization types of the output.
- oixx - Variable in class nxopen.cae.aerostructures.author.ABB.EquivalentSectionPropertiesData
-
Moment of inertia of the equivalent section around XX (expressed at the center of gravity of the equivalent section)
- ok() - Method in interface nxopen.blockstyler.BlockDialog.Ok
-
Ok callback
License requirements: None.
- OK - Static variable in class nxopen.cam.CutterExport.HolderExportStatus
-
Holder has been export successfully
- OK - Static variable in class nxopen.cam.CutterExport.TrackpointExportStatus
-
Trackpoint has been export successfully
- OK - Static variable in class nxopen.cam.FeatureGeometryGroup.ProcessStatus
-
Feature group status is ok
- OK - Static variable in class nxopen.PartCollection.SdpsStatus
-
The work part was set successfully.
- OK - Static variable in class nxopen.routing.Run.CompareStatus
-
No missing, extra or discrepancy items
- OK - Static variable in class nxopen.routing.SingleDevice.DeleteObjectResult
-
Single Device deleted successfully.
- OK - Static variable in class nxopen.routing.StockDataRefreshBuilder.RefreshStatus
-
Refresh successful
- OK - Static variable in class nxopen.Selection.DialogResponse
-
User selected Ok
- OK - Static variable in class nxopen.Selection.Response
-
User selected Ok
- OK - Static variable in class nxopen.uistyler.DialogItem.DialogItemIndex
-
Ok index
- OK - Static variable in class nxopen.uistyler.DialogResponse
-
OK button was selected.
- OK_INDEX - Static variable in class nxopen.uistyler.StylerEvent.Miscellaneous
-
Ok index
- OK_REASON - Static variable in class nxopen.uistyler.StylerEvent.Reason
-
Ok reason
- okay(StylerEvent) - Method in interface nxopen.uistyler.DialogItem.Okay
-
Called when a dialog user clicks OK or MB2 anywhere in NX or presses the OK's keyboard accelerator
as defined in the resource file.
- OldAndNewOutputCurvesData() - Constructor for class nxopen.SketchIntersectionCurveBuilder.OldAndNewOutputCurvesData
-
- OLDER - Static variable in class nxopen.layout2d.Layout2dDefinitionStatus
-
- oldExpressions - Variable in class nxopen.uf.UFAssem.AssemblyDeformPartData
-
- oldExps - Variable in class nxopen.uf.UFModl.UdfExpData
-
- oldoutputcurves - Variable in class nxopen.SketchIntersectionCurveBuilder.OldAndNewOutputCurvesData
-
The array of old output curves or points.
- oldParents - Variable in class nxopen.uf.UFAssem.AssemblyDeformPartData
-
- oldStringInName() - Method in interface nxopen.tooling.RenameAndExportComponentBuilder
-
Returns the old string in name
License requirements: None.
- OMIT - Static variable in class nxopen.annotations.DiameterRadiusSymbolPlacement
-
Specifies diameter/radius symbol is omitted
- OMIT - Static variable in class nxopen.cam.BladeCutLevels.IncompleteLevelsTypes
-
Omit
- OMIT - Static variable in class nxopen.cam.CutParametersFilletsTypes
-
Fillets mode: Omit
- OMIT - Static variable in class nxopen.cam.RoughTurningBuilder.ReversalModeTypes
-
Reversal mode: Omit
- OMIT_BODIESFROM_VIEW - Static variable in class nxopen.drawings.ViewWorkflowBuilder.Handlingbodies
-
Deprecated.
- OMIT_BODIESFROM_VIEW - Static variable in class nxopen.drawings.ViewWorkflowBuilder.HandlingBodiesType
-
- omitLastPass() - Method in interface nxopen.cam.TurnCutParameters
-
Returns the omit last pass
License requirements: None.
- omitPartiallyMapped() - Method in interface nxopen.cae.LaminateImportedLayupBuilder
-
Returns the omit partially mapped face option.
- omitReversals() - Method in interface nxopen.cam.RoughFinishTurningBuilder
-
Returns the Omit Reversals toggle
License requirements: None.
- OMITTED - Static variable in class nxopen.annotations.ZeroToleranceDisplayStyle
-
Omit the display of zero tolerance and maintain position of remaining tolerance
- OMITTED_AND_INLINED - Static variable in class nxopen.annotations.ZeroToleranceDisplayStyle
-
Omit the display of zero tolerance and inline the remaining tolerance
- OmnicadManager - Interface in nxopen.geometricutilities
-
Represents a manager for creating builder objects for OmniCAD Free Transformer
To obtain an instance of this class, refer to
Part
Created in NX10.0.0
- omnicadManager() - Method in interface nxopen.Part
-
Obtains the OmnicadManager instance belonging to this part .
- ON - Static variable in class nxopen.blockstyler.Node.DropType
-
Drop permitted on the target node
- ON - Static variable in class nxopen.cae.BeamEADBuilder.EndReleaseSetting
-
end release set to on
- ON - Static variable in class nxopen.cae.CaeElementAssociatedDataUtilsDof
-
- ON - Static variable in class nxopen.cae.CaeElementAssociatedDataUtilsEndReleaseSetting
-
End release set to on.
- ON - Static variable in class nxopen.cae.RigidEADBuilder.Dof
-
- ON - Static variable in class nxopen.cam.BoundarySet.ToolPositionTypes
-
tool tip positioned on boundary
- ON - Static variable in class nxopen.cam.CAMSetup.PostprocessSettingsReviewTool
-
show the review tool window
- ON - Static variable in class nxopen.cam.Cycle.DwellType
-
dwell on
- ON - Static variable in class nxopen.cam.CycleDwell.Mode
-
dwell on
- ON - Static variable in class nxopen.cam.CycleSpindle.Mode
-
spindle %main
- ON - Static variable in class nxopen.cam.DmSurfBuilder.ToolPositionType
-
On
- ON - Static variable in class nxopen.cam.DmToolPosition.ToolPositionOption
-
On position
- ON - Static variable in class nxopen.cam.DPMItpBuilder.ToolPositionOption
-
On position
- ON - Static variable in class nxopen.cam.InspectionAnalyzeBuilder.DofTypes
-
On
- ON - Static variable in class nxopen.cam.InspectionLinkPmiBuilder.CollisionAvoidanceEnumType
-
Collision avoidance will be done
- ON - Static variable in class nxopen.cam.InspectionMethodBuilder.AxisExtrapolationTypes
-
Extrapolate
- ON - Static variable in class nxopen.cam.InspectionMethodBuilder.ToleranceDegreeOfFreedomMode
-
On
- ON - Static variable in class nxopen.cam.LaserProfileMove.ToolSides
-
On
- ON - Static variable in class nxopen.cam.NcmScBuilder.SmoothingOptions
-
transfer smoothing activated
- ON - Static variable in class nxopen.cam.TeachmodeLinearMoveBuilder.CurveToolPositionTypes
-
On Curve
- ON - Static variable in class nxopen.cam.ToolPositioningBuilder.ToolPositioning
-
ON
- ON - Static variable in class nxopen.cam.WedmCutParameters.WirePositionTypes
-
drive on
- ON - Static variable in class nxopen.cam.ZAxisSmoothing.Options
-
on
- ON - Static variable in class nxopen.menubar.MenuButton.Toggle
-
The toggle is on.
- ON - Static variable in class nxopen.motion.BodyContactAdams.CoulombFriction
-
- ON - Static variable in class nxopen.motion.BodyContactLms.CoulombFriction
-
- ON - Static variable in class nxopen.motion.BodyContactRecurdyn.CoulombFriction
-
- ON - Static variable in class nxopen.motion.BodyContactSphereToCAD.CoulombFriction
-
- ON - Static variable in class nxopen.motion.MotionEnvironment.AdoptAssemblyJointStatus
-
Adopt Assembly Joint is turned on
- ON - Static variable in class nxopen.motion.MotionEnvironment.JointWizardStatus
-
Joint Wizard is turned on
- ON - Static variable in class nxopen.routing.RouteManager.BomBlankLines
-
- ON - Static variable in class nxopen.routing.RouteManager.BomFabrication
-
- ON - Static variable in class nxopen.routing.RouteManager.FixPosition
-
- ON - Static variable in class nxopen.Sketch.CreateInferConstraintSetting
-
Create infer constraints
- ON - Static variable in class nxopen.uf.UFMb.State
-
- ON - Static variable in class nxopen.uf.UFPatt.Switch
-
- ON - Static variable in class nxopen.userdefinedobjects.UserDefinedClass.AllowOwnedObjectSelection
-
You have permission to select objects owned by this class.
- ON - Static variable in class nxopen.userdefinedobjects.UserDefinedClass.AllowQueryClass
-
You have permission to query the class from it's name.
- ON - Static variable in class nxopen.userdefinedobjects.UserDefinedClass.Selection
-
UDO's of this class will be selectable.
- ON - Static variable in class nxopen.visualreporting.VisualReportExplorer.ExploreReportOption
-
Explore Visual Report results is on
- ON_ABEST_FIT_PLANE - Static variable in class nxopen.features.StudioXformBuilder.PlanarizeMethodType
-
Deprecated.
planarize at a best fit plane
- ON_ALL_ARCS - Static variable in class nxopen.cam.CornerControlBuilder.AdjustFeedRateOptions
-
on all arcs
- ON_ANCHOR - Static variable in class nxopen.diagramming.SheetElementBuilder.ResizeOptionType
-
- ON_ANNOTATION - Static variable in class nxopen.annotations.LeaderType
-
- ON_ANNOTATION - Static variable in class nxopen.uf.UFDrf.AssocType
-
- ON_ARROW - Static variable in class nxopen.drawings.SectionLineStyleBuilder.LabelLocationStyle
-
Deprecated.
- ON_ARROW - Static variable in class nxopen.drawings.ViewSectionLineBuilder.LocationType
-
- ON_CENTERLINE - Static variable in class nxopen.annotations.LeaderType
-
- ON_CENTERLINE - Static variable in class nxopen.cam.CenterlineDrillTurningBuilder.DrillingLocationTypes
-
Drilling Location: On centerline
- ON_CURVE - Static variable in class nxopen.annotations.AssociativityPointOption
-
Point on curve
- ON_CURVE - Static variable in class nxopen.features.TextBuilder.Types
-
Placement on a profile
- ON_CURVE_VECTOR - Static variable in class nxopen.features.DatumAxisBuilder.Types
-
Datum axis at vector on curve
- ON_DEMAND - Static variable in class nxopen.BasePart.PartPreview
-
Create a preview image on demand.
- ON_DEMAND - Static variable in class nxopen.PreviewPropertiesBuilder.ModelViewCreationOptions
-
Interactive only option that allows the model view preview to be created by selected the Create Now button
- ON_DEMAND - Static variable in class nxopen.PreviewPropertiesBuilder.PartCreationOptions
-
Interactive only option that allows the part preview to be created by selecting the Create Now button
- ON_EDGE - Static variable in class nxopen.features.shipdesign.EdgeReinforcementBuilder.Types
-
- ON_EDGE - Static variable in class nxopen.features.shipdesign.PlateChamferBuilder.Types
-
Create a chamfer on the edge
- ON_EDGE - Static variable in class nxopen.features.shipdesign.StiffenerBuilder.EdgeReinforcementPlacementMethods
-
Attach the edge reinforcement to the edge
- ON_END - Static variable in class nxopen.drawings.SectionLineStyleBuilder.LabelLocationStyle
-
Deprecated.
- ON_END - Static variable in class nxopen.drawings.ViewSectionLineBuilder.LocationType
-
- ON_FACE - Static variable in class nxopen.features.shipdesign.EdgeReinforcementBuilder.Types
-
- ON_FACE - Static variable in class nxopen.features.shipdesign.StiffenerBuilder.EdgeReinforcementPlacementMethods
-
Attach the edge reinforcement to the adajacent face
- ON_FACE - Static variable in class nxopen.features.TextBuilder.Types
-
Placement on faces
- ON_OBJECT - Static variable in class nxopen.annotations.LeaderAttachment
-
- ON_OR_AFTER_OPERATOR - Static variable in class nxopen.visualreporting.Condition.OperatorOption
-
- ON_OR_BEFORE_OPERATOR - Static variable in class nxopen.visualreporting.Condition.OperatorOption
-
- ON_ORIGINAL_MODEL - Static variable in class nxopen.cae.AxiSymmetricParameters.GetResult
-
- ON_ORIGINAL_MODEL - Static variable in class nxopen.cae.CyclicSymmetricParameters.GetResult
-
- ON_PART - Static variable in class nxopen.cam.DPMItpBuilder.CrossCurvesMethodOption
-
on part
- ON_PART - Static variable in class nxopen.cam.DPMItpBuilder.SelectionMethodOption
-
on part
- ON_PART - Static variable in class nxopen.cam.StepoverBuilder.ApplyTypes
-
Apply on Part
- ON_PART_SAVE - Static variable in class nxopen.PreviewPropertiesBuilder.ModelViewCreationOptions
-
Model view preview will be created when the part is saved
- ON_PLANE - Static variable in class nxopen.cam.StepoverBuilder.ApplyTypes
-
Apply on Plane
- ON_REFERENCE_ARROW - Static variable in class nxopen.drawings.ViewProjectedArrowSettingsBuilder.DispalyLabelType
-
- ON_REFERENCE_ARROW_AND_VIEW - Static variable in class nxopen.drawings.ViewProjectedArrowSettingsBuilder.DispalyLabelType
-
- ON_ROAD_SURFACE - Static variable in class nxopen.features.vehicledesign.MirrorCertificationBuilder.InstructionFieldPositionType
-
Represents that the instrucition field is on road surface
- ON_SAVE - Static variable in class nxopen.BasePart.PartPreview
-
Create a preview image when the part is saved.
- ON_SAVE - Static variable in class nxopen.preferences.SessionPdm.UnpopulatedBehaviourType
-
- ON_SAVE - Static variable in class nxopen.PreviewPropertiesBuilder.PartCreationOptions
-
Part preview will be created when the part is saved
- ON_STUB - Static variable in class nxopen.annotations.LeaderType
-
- ON_STUB - Static variable in class nxopen.uf.UFDrf.AssocType
-
- ON_SURFACE - Static variable in class nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder.MeasurementMethodType
-
- ON_TARGET_WALL - Static variable in class nxopen.features.vehicledesign.MirrorCertificationBuilder.InstructionFieldPositionType
-
Represents that the instrucition field is on target wall
- ON_VIEW_SAVE - Static variable in class nxopen.PreviewPropertiesBuilder.ModelViewCreationOptions
-
Model view preview will be created when the view is saved
- ONA_BEST_FIT_PLANE - Static variable in class nxopen.features.StudioXformBuilderEx.PlanarizeMethodType
-
planarize at a best fit plane
- onBeginLabelEditCallback(Tree, Node, int) - Method in interface nxopen.blockstyler.Tree.OnBeginLabelEditCallback
-
Represents the callback which gets called when label edit is attempted on any column.
- ONCE_ONLY - Static variable in class nxopen.mechatronics.DisplayChangerBuilder.ExecuteModes
-
Only execute once
- ONCE_ONLY - Static variable in class nxopen.mechatronics.ReadWriteDeviceBuilder.ExecuteMode
-
Only execute once
- ONCE_PER_ACTIVATION - Static variable in class nxopen.mechatronics.ObjectSourceBuilder.CopyEventTriggerOption
-
OncePerActivation
- onCurvePlacementProfile() - Method in interface nxopen.features.TextBuilder
-
- onDefaultActionCallback(Tree, Node, int) - Method in interface nxopen.blockstyler.Tree.OnDefaultActionCallback
-
Represents the callback which gets called when double clicked is performed on the node.
- onDeleteNodeCallback(Tree, Node) - Method in interface nxopen.blockstyler.Tree.OnDeleteNodeCallback
-
Represents the callback which gets called when the node is deleted from tree.
- onDrag(Vector3d, Matrix3x3) - Method in interface nxopen.linedesigner.FastPlacementUtilityBuilder
-
For on drag
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- onDropCallback(Tree, Node[], int, Node, int, Node.DropType, int) - Method in interface nxopen.blockstyler.Tree.OnDropCallback
-
Represents the callback which gets called when nodes are dropped on any target node.
- onDropMenuCallback(Tree, Node, int, Node, int) - Method in interface nxopen.blockstyler.Tree.OnDropMenuCallback
-
Represents the callback to show the menu when nodes are dragged using MB3 or right mouse click, and dropped on any target node.
- ONE - Static variable in class nxopen.ame.AmeTeeJunctionVariant
-
- ONE - Static variable in class nxopen.annotations.AutomaticCenterlineBuilder.CenterlineThickness
-
Width One
- ONE - Static variable in class nxopen.annotations.CenterlineSettingsBuilder.CenterlineThickness
-
Width One
- ONE - Static variable in class nxopen.annotations.FractionDenominatorFormat
-
- ONE - Static variable in class nxopen.annotations.IntersectionSymbolBuilder.Thickness
-
Width One
- ONE - Static variable in class nxopen.annotations.LineWidth
-
Width One
- ONE - Static variable in class nxopen.annotations.OffsetCenterPointBuilder.Thickness
-
Width One
- ONE - Static variable in class nxopen.annotations.TargetPointBuilder.Thickness
-
Width One
- ONE - Static variable in class nxopen.assemblies.ClearanceAnalysisBuilder.NumberOfCollections
-
- ONE - Static variable in class nxopen.assemblies.productinterface.ObjectBuilder.BuilderVersion
-
linked feature can directly select the product interface item
- ONE - Static variable in class nxopen.cae.CfdAutoRefinementConstraintBuilder.LocalSubdivisions
-
One level of subdivision
- ONE - Static variable in class nxopen.cae.CfdContactPreventionConstraintBuilder.LocalSubdivisions
-
- ONE - Static variable in class nxopen.cae.CfdLocalResolutionConstraintBuilder.LocalSubdivisions
-
- ONE - Static variable in class nxopen.cae.FluidDomainBuilder.SubdivisionType
-
- ONE - Static variable in class nxopen.cae.ModelDisplayBuilder.FreeEdgeWidth
-
- ONE - Static variable in class nxopen.cae.ModelDisplayBuilder.RotationAxisWidth
-
- ONE - Static variable in class nxopen.cae.ModelDisplayBuilder.StitchedEdgeWidth
-
- ONE - Static variable in class nxopen.cam.RoundPointBuilder.Output
-
no decimals
- ONE - Static variable in class nxopen.display.GridBuilder.LineWeightType
-
- ONE - Static variable in class nxopen.DisplayableObject.ObjectWidth
-
- ONE - Static variable in class nxopen.DisplayManager.FacetCacheMemoryLevelType
-
- ONE - Static variable in class nxopen.drawings.CustomViewSettingsBuilder.Width
-
One
- ONE - Static variable in class nxopen.drawings.DrawingCompareSettingsBuilder.WidthType
-
Deprecated.
Width One
- ONE - Static variable in class nxopen.features.BridgeCurveBuilder.SelectedObject
-
Deprecated.
input object 1 selected
- ONE - Static variable in class nxopen.features.shipdesign.SectionDrawingBuilder.ViewsPerSheetOptions
-
- ONE - Static variable in class nxopen.features.vehicledesign.PedestrianProtectionBuilder.Width
-
- ONE - Static variable in class nxopen.fields.DisplayPropertiesBuilder.LineWidthEnum
-
- ONE - Static variable in class nxopen.geometricanalysis.ReflectionAnalysisBuilder.NumberOfLinesOptions
-
1 reflection line.
- ONE - Static variable in class nxopen.PlaneTypes.AlternateType
-
First alternate solution
- ONE - Static variable in class nxopen.preferences.ViewVisualizationVisual.SmoothEdgeWidth
-
- ONE - Static variable in class nxopen.preferences.Width
-
Width One
- ONE - Static variable in class nxopen.tooling.BlankLayoutBuilder.SnapSizeOption
-
the snap size is 1
- ONE - Static variable in class nxopen.tooling.DieCavityAndSlugHoleBuilder.DieInsertStackType
-
- ONE - Static variable in class nxopen.tooling.LayoutManagementBuilder.StationItems
-
Define station number -- 01
- ONE - Static variable in class nxopen.tooling.ScrapDesignBuilder.TrimNumType
-
Specifies one step of trimming
- ONE - Static variable in class nxopen.tooling.StripLayoutBuilder.FromStationType
-
the beginning layout station is 1
- ONE - Static variable in class nxopen.tooling.StripLayoutBuilder.ToStationType
-
the end layout station is 1
- ONE - Static variable in class nxopen.tooling.StripLayoutStationInformationBuilder.StationItem
-
Define station number -- 01
- ONE - Static variable in class nxopen.ViewDependentDisplayManager.Width
-
- ONE_BODY_FOR_CONNECTED_FACES - Static variable in class nxopen.features.UnsewBuilder.UnsewOutput
-
One body for connected unsewn faces
- ONE_BODY_FOR_EACH_FACE - Static variable in class nxopen.features.UnsewBuilder.UnsewOutput
-
One body for every unsewn face.
- ONE_DIMENSION - Static variable in class nxopen.cae.optimization.Category
-
1D constraints
- ONE_DIMENSIONAL - Static variable in class nxopen.cae.Result.GroupContainer
-
- ONE_FEATURE_FOR_ALL_BODIES - Static variable in class nxopen.features.ExtractFaceBuilder.FeatureOptionType
-
An option to create one extracted or linked body feature for all selected bodies as body collector
- ONE_FEATURE_FOR_ALL_BODIES - Static variable in class nxopen.features.MirrorBodyBuilder.FeatureOptionType
-
An option to create one mirror or linked mirror body feature for all selected bodies as body collector
- ONE_FEATURE_FOR_ALL_FACES - Static variable in class nxopen.features.OffsetSurfaceBuilder.OutputOptionType
-
- ONE_FEATURE_FOR_CONNECTED_FACES - Static variable in class nxopen.features.OffsetSurfaceBuilder.OutputOptionType
-
- ONE_FEATURE_FOR_EACH_FACE - Static variable in class nxopen.features.OffsetSurfaceBuilder.OutputOptionType
-
- ONE_GUIDE - Static variable in class nxopen.features.StyledSweepBuilder.Types
-
1 Guide
- ONE_GUIDE_ONE_ORIENTATION - Static variable in class nxopen.features.StyledSweepBuilder.Types
-
1 Guide 1 Orientation
- ONE_GUIDE_ONE_TOUCH - Static variable in class nxopen.features.StyledSweepBuilder.Types
-
1 Guide 1 Touch
- ONE_HUNDRED_AND_EIGHTY - Static variable in class nxopen.pid.RotateAngleOption
-
180 degree.
- ONE_LIMIT - Static variable in class nxopen.features.shipdesign.BracketBuilder.LimitTypes
-
The bracket has one limit object
- ONE_LOOP_EXISTED - Static variable in class nxopen.tooling.EdgePatchBuilder.PatchStatus
-
One loop existed in list
- ONE_OTWO_FOUR - Static variable in class nxopen.display.DecalBuilder.ImageSize
-
resize image to 1024 x1024
- ONE_PLANE - Static variable in class nxopen.display.DynamicSectionTypes.Type
-
One plane section
- ONE_SIDE - Static variable in class nxopen.die.UncutRegionsBuilder.ResultsType
-
Find uncut regions on one side only
- ONE_SIDED - Static variable in class nxopen.weld.WeldBeadSizeBuilder.TriangleTypes
-
Basically a right triangle
- ONE_SIDED_HOLES - Static variable in class nxopen.annotations.HoleTableSettingsHoleFiltersBuilder.ScopeType
-
One-sided Holes
- ONE_SIXTH - Static variable in class nxopen.cae.AfuMathOperation.SrsToTimeOctave
-
1/6 Octave
- ONE_STEP_FEATURE - Static variable in class nxopen.die.SpringbackCompensationBuilder.DefinedByType
-
A One-Step feature.
- ONE_THIRD - Static variable in class nxopen.cae.AfuMathOperation.SrsToTimeOctave
-
1/3 Octave
- ONE_THIRD_OCTAVE - Static variable in class nxopen.cae.AfuMathOperation.TimeToSrsAxisType
-
1/3 Octave
- ONE_THIRD_OCTAVE - Static variable in class nxopen.cae.xyplot.AxisType
-
1/3 Octave type
- ONE_THIRD_OCTAVE - Static variable in class nxopen.cae.xyplot.FrequencyBandSummationBandType
-
1/3 Octave
- ONE_TWELFTH - Static variable in class nxopen.cae.AfuMathOperation.SrsToTimeOctave
-
1/12 Octave
- ONE_TWELFTH_OCTAVE - Static variable in class nxopen.cae.xyplot.AxisType
-
1/12 Octave type
- ONE_TWELFTH_OCTAVE - Static variable in class nxopen.cae.xyplot.FrequencyBandSummationBandType
-
1/12 Octave
- ONE_TWENTY_EIGHT - Static variable in class nxopen.display.DecalBuilder.ImageSize
-
resize image to 128 x 128
- ONE_TWO_EIGHT - Static variable in class nxopen.geometricanalysis.ReflectionAnalysisBuilder.NumberOfLinesOptions
-
128 reflection line.
- ONE_UP - Static variable in class nxopen.tooling.BlankNestingBuilder.LayoutTypeSpecification
-
Auto-position blank along x-axis without bounding box.
- OneDimensionalElementSplitBuilder - Interface in nxopen.cae
-
- OneDimensionalElementSplitBuilder.SplitMethodType - Class in nxopen.cae
-
represents the split method types
- onEditOptionSelectedCallback(Tree, Node, int, int, String, Tree.ControlType) - Method in interface nxopen.blockstyler.Tree.OnEditOptionSelectedCallback
-
Represents the callback which gets called when user selects an option in edit-control set by
BlockStyler.Tree.AskEditControlCallback.
- onEndLabelEditCallback(Tree, Node, int, String) - Method in interface nxopen.blockstyler.Tree.OnEndLabelEditCallback
-
Represents the callback which gets called when label edit is completed on any column.
- oneStep() - Method in interface nxopen.die.SpringbackCompensationBuilder
-
Returns the one-step feature.
- OnestepUnform - Interface in nxopen.bodydes
-
Represents a onestep unform feature
To create or edit an instance of this class, use
OnestepUnformBuilder
Created in NX5.0.0
- OnestepUnformBuilder - Interface in nxopen.bodydes
-
- OnestepUnformBuilder.Constraint - Class in nxopen.bodydes
-
The constraints of onestep unform.
- OnestepUnformBuilder.Convergency - Class in nxopen.bodydes
-
The solver convergency level of onestep unform.
- OnestepUnformBuilder.DisplaySpringbackMode - Class in nxopen.bodydes
-
The mode of display springback.
- OnestepUnformBuilder.MeshElement - Class in nxopen.bodydes
-
The 2-D mesh element type of onestep unform.
- OnestepUnformBuilder.MeshesData - Class in nxopen.bodydes
-
- OnestepUnformBuilder.NodeIdsOnFreeEdgeData - Class in nxopen.bodydes
-
- OnestepUnformBuilder.Object - Class in nxopen.bodydes
-
The object types of onestep unform.
- OnestepUnformBuilder.Part - Class in nxopen.bodydes
-
The part types of onestep unform.
- OnestepUnformBuilder.Process - Class in nxopen.bodydes
-
The process types of onestep unform.
- OnestepUnformBuilder.Surface - Class in nxopen.bodydes
-
The surface types of onestep unform.
- OnestepUnformBuilder.UnfoldMode - Class in nxopen.bodydes
-
The Onesetp unfold mode of onestep unform.
- OnestepUnformCollection - Interface in nxopen.bodydes
-
Represents a collection of OnestepUnform
To obtain an instance of this class, refer to
Part
Created in NX5.0.0
- onestepUnformRegisterProjectCallback() - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
Register the callback to solver.
- onestepUnforms() - Method in interface nxopen.Part
-
Returns the BodyDes.OnestepUnformCollection instance belonging to this part
Created in NX3.0.0
- oneToOne() - Method in interface nxopen.geometricutilities.ReplAsstBuilder
-
Returns the one to one auto matching preference
License requirements: None.
- onExpandCallback(Tree, Node) - Method in interface nxopen.blockstyler.Tree.OnExpandCallback
-
Represents the callback which gets called when the node is expanded.
- onFacePlacementMethod() - Method in interface nxopen.features.TextBuilder
-
- onFacePlacementProfile() - Method in interface nxopen.features.TextBuilder
-
- onInsertColumnCallback(Tree, Node, int) - Method in interface nxopen.blockstyler.Tree.OnInsertColumnCallback
-
- onInsertNodeCallback(Tree, Node) - Method in interface nxopen.blockstyler.Tree.OnInsertNodeCallback
-
Represents the callback which gets called when the node is inserted.
- onLegacyViewUpdate() - Method in interface nxopen.drawings.ViewWorkflowBuilder
-
Returns the on legacy view update determines whether or not components should be loaded as needed to update lightweight views
License requirements: None.
- ONLY_ARROWS - Static variable in class nxopen.cae.Post.MarkTensorStyle
-
- ONLY_BOX - Static variable in class nxopen.cae.Post.MarkTensorStyle
-
- ONLY_CURVES - Static variable in class nxopen.Section.AllowTypes
-
Allow only curves in section
- ONLY_EDGES_OR_FACES_INTERFERE - Static variable in class nxopen.geometricanalysis.SimpleInterference.Result
-
Only faces or edges interfere and no
solid interference exists between
the input bodies.
- ONLY_FEATURE - Static variable in class nxopen.cae.Type
-
compute only feature angle edge types
- ONLY_OVERLAPPING - Static variable in class nxopen.drawings.DrawingRegionBuilder.ContentToMove
-
- ONLY_POINTS - Static variable in class nxopen.Section.AllowTypes
-
Allow only points in section
- ONLY_ROTATION - Static variable in class nxopen.facet.BestFitAlignBuilder.ConstraintOptions
-
Only rotation
- ONLY_ROUTED_CONNECTIONS - Static variable in class nxopen.annotations.PinListBuilder.FilterType
-
- ONLY_SELECTED - Static variable in class nxopen.mechatronics.ObjectTransformerBuilder.TransformSourceType
-
Selected sources
- ONLY_SELECTED - Static variable in class nxopen.mechatronics.TransmitterEntryBuilder.TransmitterEntryCandidateType
-
Selected sources
- ONLY_SHOW_COMPONENTS_WITH_ATTRIBUTE - Static variable in class nxopen.tooling.ObjectAttributeManagementBuilder.ShowComponentsType
-
- ONLY_TRANSLATION - Static variable in class nxopen.facet.BestFitAlignBuilder.ConstraintOptions
-
Only translation
- ONLY_UNMOUNTED - Static variable in class nxopen.presslinesimulation.MountPointBuilder.GeometrySelectionFilterType
-
Only bodies that are not mounted can be selected.
- ONLY_UNROUTED_CONNECTIONS - Static variable in class nxopen.annotations.PinListBuilder.FilterType
-
- onlyCheckHoleFace() - Method in interface nxopen.tooling.FaceColorManagementBuilder
-
Returns the only check planar face option
License requirements: None.
- onlyImportDesignParts() - Method in interface nxopen.preferences.SessionNXGateway
-
Returns the only import design parts flag for Solid Edge.
- onMenuCallback(Tree, Node, int) - Method in interface nxopen.blockstyler.Tree.OnMenuCallback
-
Represents the callback which gets called when MB3 or right click is attempted on node or tree.
- onMenuCallback(Wizard, Wizard.TaskNavigatorItem, int, int) - Method in interface nxopen.blockstyler.Wizard.OnMenuCallback
-
The OnMenu callback notifies a client prior to creating the popup menu in the Task
Navigator.
- onMenuSelectionCallback(Tree, Node, int) - Method in interface nxopen.blockstyler.Tree.OnMenuSelectionCallback
-
Represents the callback which gets called when one of the menu option is selected.
- onMenuSelectionCallback(Wizard, Wizard.TaskNavigatorItem, int, int, int) - Method in interface nxopen.blockstyler.Wizard.OnMenuSelectionCallback
-
The OnMenuSelection callback notifies a client of the menu item selection on the popup menu
in the Task Navigator.
- onOperationTypeChanged(SmartSaveObject[], AttributePropertiesBuilder.OperationType) - Method in interface nxopen.pdm.SmartSaveBuilder
-
Updates the given smart save objects after operation type change.
- onPart - Variable in class nxopen.uf.UFWeight.Exceptions
-
- onPath() - Method in interface nxopen.geometricutilities.BlendStopshortBuilder
-
- onPathDimData() - Method in interface nxopen.geometricutilities.SecondarySectionData
-
Returns the on path dim
License requirements: None.
- onPathDimEnd() - Method in interface nxopen.geometricutilities.ReduceSurfaceRadiusBuilder
-
Returns the end position of reduced sheet body
License requirements: None.
- OnPathDimension - Interface in nxopen.blockstyler
-
Represents a On Path Dimension block .
- OnPathDimensionBuilder - Interface in nxopen.geometricutilities
-
Builds an on-path dimension .
- OnPathDimensionBuilder.UpdateReason - Class in nxopen.geometricutilities
-
The type of update to perform
- onPathDimSpanBy() - Method in interface nxopen.linedesigner.RailingFeatureBuilder
-
Returns an API to get on path dimension span by
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- onPathDimStart() - Method in interface nxopen.geometricutilities.ReduceSurfaceRadiusBuilder
-
Returns the start position of reduced sheet body
License requirements: None.
- OnPathDimWithValueBuilder - Interface in nxopen.geometricutilities
-
- onPathDistance() - Method in interface nxopen.features.GeomcopyBuilder
-
Returns the onpath distance dimension used for along path type of instancing.
- OnPathDistancePatternSpacing - Interface in nxopen.geometricutilities
-
defines the various ways pattern instances can be
spaced within the pattern, particularly in the context of the
PatternDefinition class.
- onPathEndOffset() - Method in interface nxopen.features.shipdesign.SteelVentHolesBuilder
-
Returns the offset from the start of the section to begin placing the holes.
- onPathEndOffset() - Method in interface nxopen.features.shipdesign.VentilationHoles2Builder
-
Returns the on path end offset
License requirements: None.
- onPathPitchDistance() - Method in interface nxopen.geometricutilities.OnPathDistancePatternSpacing
-
Returns the distance for the spacing of the pattern from one instance to the next.
- onPathSpanDistance() - Method in interface nxopen.geometricutilities.OnPathDistancePatternSpacing
-
Returns the distance for the spacing of the pattern for the entire pattern.
- onPathStartOffset() - Method in interface nxopen.features.shipdesign.SteelVentHolesBuilder
-
Returns the offset from the start of the section to begin placing the holes.
- onPathStartOffset() - Method in interface nxopen.features.shipdesign.VentilationHoles2Builder
-
Returns the on path start offset
License requirements: None.
- onPreSelectCallback(Tree, Node, int, boolean) - Method in interface nxopen.blockstyler.Tree.OnPreSelectCallback
-
Represents the callback which gets called when pre selection is attempted on node.
- onSelectCallback(Tree, Node, int, boolean) - Method in interface nxopen.blockstyler.Tree.OnSelectCallback
-
Represents the callback which gets called when the node is selected.
- onSelectionChangeCallback(boolean, TaggedObject[], TaggedObject[]) - Method in interface nxopen.SelectionSubscriber.OnSelectionChangeCallback
-
Prototype for a callback which is called at the end of a series of changes to the set of
selected objects.
- onStateChangeCallback(Tree, Node, int) - Method in interface nxopen.blockstyler.Tree.OnStateChangeCallback
-
Represents the callback which gets called when the state icon is clicked.
- onSubNodeCallback(Wizard, int, int, Wizard.SubNodeAction) - Method in interface nxopen.blockstyler.Wizard.OnSubNodeCallback
-
The OnSubNode callback notifies a client of an action performed
on a sub-node in the Wizard Task Navigator.
- onTangentToFlag - Variable in class nxopen.uf.UFBound.MemberData
-
- onTangentToFlag - Variable in class nxopen.uf.UFBound.Object
-
- onTargetDynamicPlane() - Method in interface nxopen.features.subdivision.SubdivisionProjectCageBuilder
-
Update builder data based on target dynamic plane definition
License requirements: nx_subdivision (" NX SUBDIVISION")
.
- onTargetPlane() - Method in interface nxopen.features.subdivision.SubdivisionProjectCageBuilder
-
Update builder data based on target plane definition
License requirements: nx_subdivision (" NX SUBDIVISION")
.
- onTool() - Method in interface nxopen.geometricutilities.RegionTracker
-
Returns a flag indicating if the region belongs to the tool (true) or to the target (false)
License requirements: None.
- onViewSelection() - Method in interface nxopen.drawings.ViewWorkflowBuilder
-
Returns the on view selection determines whether or not components should be loaded as needed for selection in lightweight
views for accurate dimensioning
License requirements: None.
- OOTHER - Static variable in class nxopen.cam.TurnToolBuilder.ReliefAngleTypes
-
Relief angle type: O (other)
- op1Left() - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarDetailBuilder
-
Returns the left OP1 alternative point.
- op1Left() - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarWizardBuilder
-
Returns the left additional pillar 1 point.
- op1LeftFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarDetailBuilder
-
Returns the left OP1 alternative point flag.
- op1Right() - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarDetailBuilder
-
Returns the right OP1 alternative point.
- op1Right() - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarWizardBuilder
-
Returns the right additional pillar 1 point.
- op1RightFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarDetailBuilder
-
Returns the right OP1 alternative point flag.
- op2Left() - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarDetailBuilder
-
Returns the left OP2 alternative point.
- op2LeftFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarDetailBuilder
-
Returns the left OP2 alternative point flag.
- op2OutputOption() - Method in interface nxopen.cae.optimization.TBSOutputControlOptions
-
Returns the op2 output control option
License requirements: None.
- Op2Record - Interface in nxopen.cae.ftk
-
Represents the op2 record data
Not support KF.
- op2Right() - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarDetailBuilder
-
Returns the right OP2 alternative point.
- op2RightFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarDetailBuilder
-
Returns the right OP2 alternative point flag.
- OP_SKIP_LAST_ELEMENT - Static variable in class nxopen.uf.UFPath.OpSkip
-
- OP_SKIP_OFF - Static variable in class nxopen.uf.UFPath.OpSkip
-
- OP_SKIP_ON - Static variable in class nxopen.uf.UFPath.OpSkip
-
- opacity() - Method in interface nxopen.diagramming.SheetBuilder
-
Returns the opacity of sheet. 0.0 is completely transparent and 1.0 is completely opaque
License requirements: None.
- opacity - Variable in class nxopen.diagramming.tables.TableBuilder.FillColorData
-
- OPAQUE - Static variable in class nxopen.cae.Post.FaceStyle
-
- OPCClientBuilder - Interface in nxopen.mechatronics
-
Represents a
OPCClientBuilder
This class is sub-object of another builder, and cannot be directly instantiated.
- OPCClientBuilder.AvailableItemsData - Class in nxopen.mechatronics
-
- OPCClientBuilder.ServerOption - Class in nxopen.mechatronics
-
the server option.
- OPCClientBuilder.TagAccess - Class in nxopen.mechatronics
-
the access right of OPC item.
- OPCClientBuilder.TagAttribute - Class in nxopen.mechatronics
-
the attribute of OPC item.
- OPCClientBuilder.TagDataType - Class in nxopen.mechatronics
-
the data type of OPC item.
- OPCClientBuilder.TagInfo - Class in nxopen.mechatronics
-
Represents OPCUATag info definition structure.
- OPCDA - Static variable in class nxopen.mechatronics.SignalMappingBuilder.AppOption
-
- opcdaclient() - Method in interface nxopen.mechatronics.ExternalSignalConfigurationBuilder
-
Returns the OPC DA builder that holds the configuration for OPC DA clients.
- opcFileBrowser() - Method in interface nxopen.mechatronics.OPCClientBuilder
-
Returns the opc file browser.
- opcserverName() - Method in interface nxopen.mechatronics.SignalConnectionBuilder
-
Returns the opc Server
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- opcsignalAccess() - Method in interface nxopen.mechatronics.SignalConnectionBuilder
-
Returns the OPC access previlege type.
- opcsignalName() - Method in interface nxopen.mechatronics.SignalConnectionBuilder
-
Returns the OPC signal name.
- opcsignalType() - Method in interface nxopen.mechatronics.SignalConnectionBuilder
-
Returns the OPC signal type.
- OPCUA - Static variable in class nxopen.mechatronics.SignalMappingBuilder.AppOption
-
- opcuaclient() - Method in interface nxopen.mechatronics.ExternalSignalConfigurationBuilder
-
Returns the OPC UA builder that holds the configuration for OPC UA clients.
- OPCUAClientBuilder - Interface in nxopen.mechatronics
-
- OPCUAClientBuilder.TagInfo - Class in nxopen.mechatronics
-
Represents OPCUATag info definition structure.
- OPEN - Static variable in class nxopen.annotations.SearchCriteriaSurfaceFinishBuilder.SurfaceFinishTypes
-
open
- open() - Method in interface nxopen.assemblies.ComponentGroup
-
Loads a selected component group by name during Assembly part file open.
- OPEN - Static variable in class nxopen.cam.BoundarySet.BoundaryTypes
-
open boundary
- OPEN - Static variable in class nxopen.diagramming.ArrowStyleType
-
- OPEN - Static variable in class nxopen.diagramming.DiagrammingArrowtype
-
Setting the arrow type open arrow
- OPEN - Static variable in class nxopen.diagramming.SheetBordersAndZonesBuilder.ArrowStyleType
-
- OPEN - Static variable in class nxopen.drawings.ArrowStyleType
-
- open() - Method in interface nxopen.drawings.DrawingSheet
-
Displays and activates the drawing sheet so that it can be edited.
- OPEN - Static variable in class nxopen.drawings.SectionLineStyleBuilder.ArrowheadStyleType
-
Deprecated.
- OPEN - Static variable in class nxopen.drawings.ViewProjectedArrowSettingsBuilder.DimensionsStyleType
-
- OPEN - Static variable in class nxopen.drawings.ViewSectionLineBuilder.StyleType
-
- OPEN - Static variable in class nxopen.features.sheetmetal.ClosedCornerBuilder.TreatmentTypeOptions
-
Only Webs will be closed
- OPEN - Static variable in class nxopen.features.sheetmetal.EditCornerBuilder.BendClosureTypeOptions
-
- OPEN - Static variable in class nxopen.features.sheetmetal.MiterOptions.ClosedCornerTypeOptions
-
corner is open
- OPEN - Static variable in class nxopen.features.sheetmetal.ThreeBendCornerBuilder.TreatmentTypeOptions
-
- open() - Method in interface nxopen.Layout
-
Opens a layout.
- open() - Method in interface nxopen.ListingWindow
-
Opens the listing window.
- open(String) - Method in interface nxopen.PartCollection
-
Opens an existing .prt part, but does not set it to be the active display part.
- open(DatabaseObject[]) - Method in interface nxopen.pdm.WebAppSession
-
Open parts represented by database objects inside NX.
- OPEN - Static variable in class nxopen.preferences.RoutingLogical.FlowArrowEnumType
-
Open arrow head on flow arrow.
- open(SpreadsheetManager.Sheettype, String) - Method in interface nxopen.SpreadsheetManager
-
Opens excel sheet associated with given part file.
- open - Variable in class nxopen.uf.UFOper.Status
-
- open(String) - Method in interface nxopen.uf.UFPart
-
- OPEN - Static variable in class nxopen.uistyler.FileOperationData.FileOperationType
-
Open file operation
- open(String) - Method in interface nxopen.visualreporting.VisualReportManager
-
- OPEN_AND_MODIFIER - Static variable in class nxopen.annotations.SearchCriteriaSurfaceFinishBuilder.SurfaceFinishTypes
-
open and modifier
- OPEN_AND_MODIFIER_AND_ALL_AROUND - Static variable in class nxopen.annotations.SearchCriteriaSurfaceFinishBuilder.SurfaceFinishTypes
-
opem and modifier and all around
- OPEN_ARROW - Static variable in class nxopen.annotations.ArrowheadType
-
- OPEN_ARROW - Static variable in class nxopen.annotations.LeaderData.ArrowheadType
-
Open arrowhead type
- OPEN_ARROW - Static variable in class nxopen.diagramming.DiagrammingFlowdirectionarrowstyle
-
- OPEN_ARROW - Static variable in class nxopen.uf.UFDrf.ArrowheadAndFillType
-
- OPEN_ARROWHEAD - Static variable in class nxopen.uf.UFDraw.ArwHeadCntl
-
- OPEN_CIRCLE - Static variable in class nxopen.preferences.SessionModeling.EndpointDisplayStyleType
-
- OPEN_CIRCLE - Static variable in class nxopen.preferences.SessionModeling.PoleDisplayStyleType
-
- OPEN_CIRCLE - Static variable in class nxopen.preferences.SessionModeling.PoleEditStyleType
-
- OPEN_CRG - Static variable in class nxopen.motion.RoadBuilder.SurfaceDatatypeChoices
-
OpenCRG
- OPEN_DOUBLE_ARROW - Static variable in class nxopen.annotations.ArrowheadType
-
- OPEN_DOUBLE_ARROW - Static variable in class nxopen.annotations.LeaderData.ArrowheadType
-
Open double arrowhead type
- OPEN_DOUBLE_ARROW - Static variable in class nxopen.diagramming.DiagrammingFlowdirectionarrowstyle
-
- OPEN_DOUBLE_ARROW - Static variable in class nxopen.uf.UFDrf.ArrowheadAndFillType
-
- OPEN_END - Static variable in class nxopen.EffectivityConditionBuilder.ToUnitType
-
Sets open end unit as toUnit for effectivity range
- OPEN_HEM_TYPE - Static variable in class nxopen.features.sheetmetal.HemFlangeBuilder.TypeOptions
-
- OPEN_LOOP - Static variable in class nxopen.motion.SignalChartBuilder.Type
-
Open loop
- OPEN_LOOP_HEM_TYPE - Static variable in class nxopen.features.sheetmetal.HemFlangeBuilder.TypeOptions
-
- OPEN_PART_FUN - Static variable in class nxopen.uf.UFUi.FunType
-
- OPEN_PART_REASON - Static variable in class nxopen.uf.UF.CallbackReason
-
- OPEN_PROFILE - Static variable in class nxopen.cam.LaserProfileMove.ShapeTypes
-
Open Profile
- OPEN_REGION - Static variable in class nxopen.features.GlobalShapingBuilder.DeformationTypeValues
-
Open region
- OPEN_SAVED_COMPARISON_REPORT - Static variable in class nxopen.drawings.TrackDrawingChangesGeneralBuilder.CompareMethodType
-
This option is used to open a compare report that is saved in the current part
- openActiveDisplay(String, DisplayPartOption) - Method in interface nxopen.PartCollection
-
Opens an existing part and sets this part as the active display part.
- openBase(String) - Method in interface nxopen.PartCollection
-
Opens an existing part, but does not set it to be the active display part.
- OpenBaseData() - Constructor for class nxopen.PartCollection.OpenBaseData
-
- openBaseDisplay(String) - Method in interface nxopen.PartCollection
-
Opens an existing part and sets this part as the active display part.
- openBinaryStlFile(String, boolean, String) - Method in interface nxopen.uf.UFStd
-
- openBriefcase(String) - Method in interface nxopen.issue.IssueManager
-
- openClosedFlag - Variable in class nxopen.uf.UFBound.AllData
-
- openCompDrawing(NXObject, String, String, String, String) - Method in interface nxopen.tooling.CompDrawingBuilder
-
Opens a drawing in a component.
- openComponentAs(Tag, String, String) - Method in interface nxopen.uf.UFPart
-
- OpenComponentAsData() - Constructor for class nxopen.uf.UFPart.OpenComponentAsData
-
- openComponentNavigator() - Method in interface nxopen.routing.RouteManager
-
Opens the Component Navigator.
- openComponents(ComponentAssembly.OpenOption, Component[]) - Method in interface nxopen.assemblies.ComponentAssembly
-
Given an array of components, open the components using the open_option.
- OpenComponentsData() - Constructor for class nxopen.assemblies.ComponentAssembly.OpenComponentsData
-
- openConnectionNavigator() - Method in interface nxopen.routing.RouteManager
-
Opens the Connection Navigator.
- openConvertedPmiDestinationPart() - Method in interface nxopen.drawings.ConvertDraftingContentsBuilder
-
Returns the option to open converted pmi destination part
License requirements: None.
- openCset(Tag) - Method in interface nxopen.uf.UFPart
-
- OpenData() - Constructor for class nxopen.PartCollection.OpenData
-
- OpenData() - Constructor for class nxopen.uf.UFPart.OpenData
-
- openDisplay(String) - Method in interface nxopen.PartCollection
-
Opens an existing .prt part and sets this part as the active display part.
- openDist() - Method in interface nxopen.tooling.DieBaseBuilder
-
Returns the open distance value.
- openDrawing(String, String, String, String) - Method in interface nxopen.tooling.CompDrawingBuilder
-
- openDrawing(Tag) - Method in interface nxopen.uf.UFDraw
-
- OpenDuctMeshBuilder - Interface in nxopen.cae
-
- openFile() - Method in interface nxopen.cam.InspectionGraphicalReportOutputBuilder
-
Returns the open file option
License requirements: None.
- openFile() - Method in interface nxopen.cam.WorkInstructionOutputBuilder
-
Returns the open file
License requirements: None.
- openFile(String) - Method in interface nxopen.markup.MarkupFileCollection
-
Opens a
File
License requirements: None.
- openFile(String, SpreadsheetManager.OpenMode) - Method in interface nxopen.SpreadsheetManager
-
Opens an Excel spreadsheet file.
- openFromFile(String) - Method in interface nxopen.features.vehicledesign.ManikinBuilder
-
Update the manikin size definition from a file.
- openFromFile() - Method in interface nxopen.weld.ExportWeldBuilder
-
Open a template file to update exported attributes.
- openFunctionModel(String, String) - Method in interface nxopen.mechatronics.MechatronicsManager
-
Opens the specified function model.
- openImportedResult(String, String, Result.ResultBasicUnit) - Method in interface nxopen.cae.ResultManager
-
Opens a imported result object given a solver results file and the unit systems that these results are defined in.
- openingAddGate() - Method in interface nxopen.linedesigner.RailOpeningFeatureBuilder
-
Returns the opening add gate is return
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- openings() - Method in interface nxopen.features.PatchOpeningsBuilder
-
Returns the edges defining the openings to patch.
- openingStyleEnum() - Method in interface nxopen.linedesigner.GateFeatureBuilder
-
Returns the opening style of gate
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- openingStyleEnum() - Method in interface nxopen.linedesigner.RailOpeningFeatureBuilder
-
Returns the rail opening style enum
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- openListingWindow() - Method in interface nxopen.uf.UFUi
-
- openLogicalModel(String, String) - Method in interface nxopen.mechatronics.MechatronicsManager
-
Opens the specified logical model.
- openLwaArchiveMaterialsLibrary(String) - Method in interface nxopen.uf.UFDisp
-
- openMasterModelFile(String) - Method in interface nxopen.tooling.AssemblyDrawingBuilder
-
Open the master model file
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- openParameterSpreadSheetToEdit() - Method in interface nxopen.features.shipdesign.QualifySketchBuilder
-
Opens parameter spreadsheet to edit.
- openPartFile() - Method in interface nxopen.features.shipdesign.QualifySketchBuilder
-
Opens the template part file.
- openPartNavigator() - Method in interface nxopen.Session
-
Opens the part navigator
License requirements: None.
- openPasswordSafe(String, String) - Method in interface nxopen.PartCollection
-
This method is for opening a password safe.
- openProfileSmartVolumeOption() - Method in interface nxopen.geometricutilities.SmartVolumeProfileBuilder
-
Returns the option for enabling open profile smart volume.
- openQuiet(String) - Method in interface nxopen.uf.UFPart
-
- OpenQuietData() - Constructor for class nxopen.uf.UFPart.OpenQuietData
-
- openRegistrationSpreadSheetToEdit() - Method in interface nxopen.features.shipdesign.QualifySketchBuilder
-
Opens registration spreadsheet to edit.
- openReportDocumentAfterExport() - Method in interface nxopen.report.ReportPreference
-
Returns the option indicates whether to open report document after exporting report
License requirements: None.
- openReports(String[], String[]) - Method in interface nxopen.visualreporting.VisualReportManager
-
- openRequirementModel(String, String) - Method in interface nxopen.mechatronics.MechatronicsManager
-
Opens the specified requirement model.
- openResultPart(ShapeSearchBuilder.OpenPartType, String, int) - Method in interface nxopen.shapesearch.ShapeSearchBuilder
-
Open the searched result part.
- openScenario(String, Tag) - Method in interface nxopen.uf.UFSf
-
- openSeedPartBlankTemplate(String, boolean) - Method in interface nxopen.PartCollection
-
Open unpopulated dataset with blank template
License requirements: None.
- openSheet(Sheet) - Method in interface nxopen.diagramming.DiagrammingManager
-
- openSheet(Sheet) - Method in interface nxopen.diagramming.SheetManager
-
- openSheet(Sheet) - Method in interface nxopen.pid.PidManager
-
Opens a
Sheet
License requirements: nx_pid_design_reader ("NX P and ID Design Reader") OR nx_pid_design_author ("NX P and ID Design Author")
Created in NX11.0.0
- openSheetQuietly(Sheet) - Method in interface nxopen.pid.PidManager
-
Opens a
Sheet
without displaying the sheet.
- openSignalFunction() - Method in interface nxopen.motion.SignalChartBuilder
-
Returns the open signal function
License requirements: nx_motion_motor ("NX Motion Motor")
.
- openSingleComponentAs(Tag, String) - Method in interface nxopen.uf.UFPart
-
- OpenSingleComponentAsData() - Constructor for class nxopen.uf.UFPart.OpenSingleComponentAsData
-
- openStatus - Variable in class nxopen.assemblies.ComponentAssembly.OpenComponentsData
-
Shows the status of the objects in an indexed array according to if they could be opened
- openTextStlFile(String, boolean) - Method in interface nxopen.uf.UFStd
-
- openUnloadedParents() - Method in interface nxopen.assemblies.LoadInterpartDataBuilder
-
Returns the open unloaded parents level type
License requirements: None.
- oper() - Method in interface nxopen.UFSession
-
- OPERAND - Static variable in class nxopen.ame.PlcRule.RefObjectType
-
- OPERAND - Static variable in class nxopen.ame.PortBuilder.Type
-
- OperandRuleBuilder - Interface in nxopen.ame
-
- OperandRuleBuilder.CreationType - Class in nxopen.ame
-
replace or insert rule Type
- operateOption() - Method in interface nxopen.features.vehicledesign.BaseDataImportExportBuilder
-
Returns the option which indicates if the spreadsheet is to be imported or exported.
- OPERATING_SYSTEM - Static variable in class nxopen.features.BodyByEquationBuilder.LocationTypes
-
Worksheet is on the native OS file system.
- OPERATING_SYSTEM - Static variable in class nxopen.features.EmbedManagerBuilder.LocationTypes
-
File exists on the native OS.
- OPERATING_SYSTEM - Static variable in class nxopen.features.MapleBuilder.LocationType
-
Deprecated.
Worksheet is on the native OS file system.
- OPERATING_SYSTEM - Static variable in class nxopen.features.MathIntegrationBuilder.LocationTypes
-
Worksheet is on the native OS file system.
- OPERATION - Static variable in class nxopen.cam.CAMSession.ObjectSubtype
-
Operations
- Operation - Interface in nxopen.cam
-
Represents an operation
To create or edit an instance of this class, use
OperationBuilder
Created in NX4.0.0
- OPERATION - Static variable in class nxopen.cam.PathDisplay.ColorByType
-
- operation() - Method in interface nxopen.cam.ToolPathSplitItemBuilder
-
Returns the operation object returned
License requirements: None.
- operation() - Method in interface nxopen.features.BooleanBuilder
-
Returns the boolean operation
License requirements: None.
- operation() - Method in interface nxopen.features.ColorFeatureGroupBuilder
-
Returns the color operation option.
- operation() - Method in interface nxopen.features.TrimAndExtendBuilder
-
Returns the trim extend type
License requirements: None.
- operation() - Method in interface nxopen.geometricutilities.PatternIncrementItem
-
Returns the increment operation
License requirements: None.
- Operation - Interface in nxopen.mfg.mlp
-
Represents a Machining Line Planner operation
To obtain an instance of this class use GetOperation of InProcessFeature or GetOperations of ProcessSetup.
- Operation - Class in nxopen.routing
-
Available operations to perform for Overstock Applications
- OPERATION_NOT_ALLOCATED - Static variable in class nxopen.FeatureProcessBuilderStatus.ResultStatus
-
Some operations have been created, but others didn't.
- OperationBuilder - Interface in nxopen.cam
-
Represents a Opr Builder
This is an abstract class, and cannot be instantiated.
- OperationBuilder.HoleAxisTypes - Class in nxopen.cam
-
Available types for Hole Axis Type in feature milling and hole making
- OperationBuilder.HoleDepthTypes - Class in nxopen.cam
-
Available types for Hole Depth Type in feature milling and hole making
- OperationBuilder.OptimizationBasedOnTypes - Class in nxopen.cam
-
Available types for optimization based on in operation
- OperationBuilder.OptimizationDistanceTypes - Class in nxopen.cam
-
Available types for optimization distance method in operation
- OperationBuilder.OptimizationLevelTypes - Class in nxopen.cam
-
Available types for optimization level in operation
- OperationCollection - Interface in nxopen.cam
-
Represents the operation collection
To obtain an instance of this class, refer to
CAMSetup
Created in NX4.0.0
- OperationCollection.UseDefaultName - Class in nxopen.cam
-
Whether use the default name in creation
- OperationDisplayOptionsBuilder - Interface in nxopen.cam
-
Represents a display options Builder
This is an abstract class and cannot be instantiated.
- OperationDisplayOptionsBuilder.PathDisplayTypes - Class in nxopen.cam
-
the path display types .
- OperationDisplayOptionsBuilder.PathNormalTypes - Class in nxopen.cam
-
the path normal types .
- OperationDisplayOptionsBuilder.PatternDisplayTypes - Class in nxopen.cam
-
the pattern display types .
- OperationDisplayOptionsBuilder.ToolDisplayTypes - Class in nxopen.cam
-
the tool display types .
- OperationErrors - Interface in nxopen.pdm
-
Represents Operation Errors to be returned in TCIN related operations .
- operationID() - Method in interface nxopen.mechatronics.GanttOperationBuilder
-
Returns the operation id
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- operationList() - Method in interface nxopen.cam.ToolPathSplitBuilder
-
Returns the operation list
License requirements: None.
- operationName() - Method in interface nxopen.cam.InspectionAlignmentAssistantBuilder
-
Returns the alignment assistant operation name
License requirements: None.
- operationName() - Method in interface nxopen.cam.PathLevelMarker
-
Returns the operation name
License requirements: None.
- operationName() - Method in interface nxopen.mechatronics.GanttOperationBuilder
-
Returns the operation name
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- operationOption() - Method in interface nxopen.features.TrimCurve2Builder
-
Returns the curve operation type
License requirements: None.
- operations - Variable in class nxopen.cam.FeatureProcessBuilder.CreateFeatureProcessesData
-
List with created operations,
- operations - Variable in class nxopen.cam.FeatureProcessBuilder.RecreateFeatureProcessesData
-
List with created operations,
- operations(Tag, Tag, UFModl.FeatureSigns) - Method in interface nxopen.uf.UFModeling
-
- OperationSetTeaching - Interface in nxopen.cam
-
- operationState() - Method in interface nxopen.cae.ProjectNodesToCadGeometryBuilder
-
Returns the operation to be performed.
- OperationTeaching - Interface in nxopen.cam
-
- operationToCheck() - Method in interface nxopen.cam.CutDepthChecker
-
Returns the operation that is being checked
License requirements: None.
- OperationTransformBuilder - Interface in nxopen.cam
-
- OperationTransformBuilder.Angle - Class in nxopen.cam
-
Angle Type
- OperationTransformBuilder.Line - Class in nxopen.cam
-
Line Type
- OperationTransformBuilder.Motion - Class in nxopen.cam
-
Motion Type
- OperationTransformBuilder.Result - Class in nxopen.cam
-
Transform Option
- OperationTransformBuilder.Transform - Class in nxopen.cam
-
Transform Type
- operationType() - Method in interface nxopen.cae.BoltBuilder
-
Returns the operation type
License requirements: None.
- operationType() - Method in interface nxopen.cae.ElementModifyOrderBuilder
-
Returns the operation option
License requirements: None.
- operationType() - Method in interface nxopen.features.RapidSurfaceBuilder
-
Returns the operation type
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- operationType - Variable in class nxopen.uf.UFModl.BendOperationData
-
- operationTypes() - Method in interface nxopen.mechatronics.GanttOperationBuilder
-
Returns the operation type
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- operator() - Method in interface nxopen.mechatronics.GanttOperationParameterBuilder
-
Returns the operator value.
- OPERATOR - Static variable in class nxopen.sim.MachineToolConfiguration.PlaneTypes
-
The operator panel plane type
- OPERATOR_AND - Static variable in class nxopen.ame.PlcRule.Type
-
- OPERATOR_OR - Static variable in class nxopen.ame.PlcRule.Type
-
- operatorControlType() - Method in interface nxopen.features.OvercrownBuilder
-
Returns the controlling type Global Shaping Operation.
- operatorMessage() - Method in interface nxopen.cam.TurnRoughFinishLocalReturnBuilder
-
Returns the Operator Message String
License requirements: None.
- operatorOperationType() - Method in interface nxopen.features.OvercrownBuilder
-
Returns the Type of Global Shaping Operation
License requirements: solid_modeling ("SOLIDS MODELING")
.
- operatorOutputType() - Method in interface nxopen.features.OvercrownBuilder
-
Returns the output type Global Shaping Operation
License requirements: solid_modeling ("SOLIDS MODELING")
.
- OperatorRuleBuilder - Interface in nxopen.ame
-
- OperatorRuleBuilder.NegationValue - Class in nxopen.ame
-
Enum of negation value
- OperatorRuleBuilder.ParameterType - Class in nxopen.ame
-
Enum of parameter type
- operatorTransitionType() - Method in interface nxopen.features.OvercrownBuilder
-
Returns the Transition option for Global Shaping Operator
License requirements: solid_modeling ("SOLIDS MODELING")
.
- operatorType() - Method in interface nxopen.ame.OperatorRuleBuilder
-
Returns the OperatorType
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- operatorType() - Method in interface nxopen.visualreporting.Condition
-
- operatorValue() - Method in interface nxopen.mechatronics.GanttOperationConditionBuilder
-
Returns the operator of current condition
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- operListProgramGroup() - Method in interface nxopen.cam.WorkInstructionBuilder
-
Returns the selected Program Group for Operation List
License requirements: None.
- opillarLeft() - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarWizardBuilder
-
Returns the left additional pillar geometry.
- opillarRight() - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarWizardBuilder
-
Returns the right additional pillar geometry.
- opn - Variable in class nxopen.cae.aerostructures.author.ABB.LoadDistributionBoltsConcentricLoadsData
-
Shear load on bolt (nblc x nbbolt)
- opName() - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
Returns the command operation name
License requirements: None.
- OPP - Static variable in class nxopen.cam.DmRotaryFloorFinishBuilder.MatSideType
-
opp
- OPP - Static variable in class nxopen.cam.DmSurfBuilder.MatSideType
-
opp
- OPPOSED_LINE_FEATURE - Static variable in class nxopen.uf.UFGdt.FeatureType
-
- OPPOSED_POINT_FEATURE - Static variable in class nxopen.uf.UFGdt.FeatureType
-
- OPPOSING - Static variable in class nxopen.cam.CutSides.SideType
-
Opposing Sides
- opposingMoldLine() - Method in interface nxopen.features.shipdesign.QualifySketchBuilder
-
Returns the selected opposing mold line.
- opposingSideScallop() - Method in interface nxopen.features.shipdesign.ProfileCutoutBuilder
-
- OPPOSITE - Static variable in class nxopen.cam.Blade.MaterialSideType
-
opp
- OPPOSITE - Static variable in class nxopen.cam.GeometrySet.MaterialSideTypes
-
the tool cuts the opposite side
- OPPOSITE - Static variable in class nxopen.weld.DatumCommonBuilder.CreationDirectionMethods
-
Reverse the construction orientation
- OPPOSITE - Static variable in class nxopen.weld.WeldCreationDirection
-
Opposite construction direction
- OPPOSITE_BINORMAL - Static variable in class nxopen.DatumConstraint.Solution
-
Datum axis at opposite to binormal to curve
- OPPOSITE_BINORMAL - Static variable in class nxopen.features.DatumAxisBuilder.AlternateSolution
-
Datum axis at opposite to binormal to curve
- OPPOSITE_BINORMAL - Static variable in class nxopen.features.DatumPlaneBuilder.AlternateSolution
-
Datum plane at opposite to binormal to curve
- OPPOSITE_CORNER - Static variable in class nxopen.fields.SpatialMap.BoundingBoxMapEnum
-
- OPPOSITE_GUIDE - Static variable in class nxopen.cam.GuidingCurvesCutDir.Option
-
Cut direction is opposite the guide curve
- OPPOSITE_GUIDE - Static variable in class nxopen.features.shipdesign.ProfileBuilder.Alignment
-
- OPPOSITE_GUIDE - Static variable in class nxopen.features.shipdesign.StiffenerBuilder.EdgeReinforcementAlignmentMethod
-
Place the end of the Edge Reinforcement on the edge opposite the selected edge
- OPPOSITE_NORMAL - Static variable in class nxopen.DatumConstraint.Solution
-
- OPPOSITE_NORMAL - Static variable in class nxopen.features.DatumAxisBuilder.AlternateSolution
-
Datum axis at opposite to normal to curve
- OPPOSITE_NORMAL - Static variable in class nxopen.features.DatumPlaneBuilder.AlternateSolution
-
Datum plane at opposite to normal to curve
- OPPOSITE_NORMAL - Static variable in class nxopen.features.shipdesign.OrientationDefinitionBuilder.PlacementSideTypes
-
The stiffener will be placed on the negative normal side of the
placement faces.
- OPPOSITE_TANGENT - Static variable in class nxopen.DatumConstraint.Solution
-
- OPPOSITE_TANGENT - Static variable in class nxopen.features.DatumAxisBuilder.AlternateSolution
-
Datum axis at opposite to tangent to curve
- OPPOSITE_TANGENT - Static variable in class nxopen.features.DatumPlaneBuilder.AlternateSolution
-
Datum plane at opposite to tangent to curve
- OPPOSITE_TO_NORMAL - Static variable in class nxopen.features.sheetmetal.SheetmetalManagerTabSweepDir
-
Tab sweep direction opposite to normal direction
- oppositeCorner() - Method in interface nxopen.fields.SpatialMapBuilder
-
Returns the opposite corner
License requirements: None.
- oppositeDirection() - Method in interface nxopen.cam.CylinderMillingBuilder
-
Returns the opposite direction
License requirements: None.
- oppositeDirection() - Method in interface nxopen.cam.HoleDrillingBuilder
-
- OppositeDirection - Interface in nxopen.cam
-
Represents OppositeDirection .
- oppositeDirectionBuilder() - Method in interface nxopen.cam.CylinderMillingBuilder
-
- oppositeDirectionBuilder() - Method in interface nxopen.cam.ThreadMillingBuilder
-
Returns the opposite direction builder
License requirements: None.
- oppositeEdgeConstraint() - Method in interface nxopen.features.MatchEdgeBuilder
-
Returns the start continuity constraint for matched surface
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- oppositeEdgeContinuity() - Method in interface nxopen.features.EdgeSymmetryBuilder
-
Returns the opposite edge continuity
License requirements: None.
- oppositeLock - Variable in class nxopen.uf.UFModl.MatchedgeData
-
- oppositeSense() - Method in interface nxopen.geometricutilities.FtmTransformCurvesBuilder
-
Returns the option to reverse the OmniCAD pre-determined direction for the transformation start and end curves
License requirements: None.
- oppositeSide() - Method in interface nxopen.geometricutilities.FtmTransformCurvesBuilder
-
Returns the option to change the displacements to the opposite side of the transformation
License requirements: None.
- oppositeSideExtensionOption() - Method in interface nxopen.features.LawExtensionBuilder
-
Returns the opposite side extension option
License requirements: solid_modeling ("SOLIDS MODELING") OR free_form_modeling ("FREE-FORM MODELING")
.
- oppositeSideExtensionOption() - Method in interface nxopen.features.LawExtensionBuilderEx
-
Returns the opposite side extension option
License requirements: None.
- oppositeSideLengthLaw() - Method in interface nxopen.features.LawExtensionBuilder
-
Returns the opposite side length law.
- oppositeSideLengthLaw() - Method in interface nxopen.features.LawExtensionBuilderEx
-
Returns the opposite side length law.
- oppositeThickness() - Method in interface nxopen.features.shipdesign.PlateStockBuilder
-
Returns the opposite thickness.
- OPSTOP - Static variable in class nxopen.cam.NcmTurnThreadBuilder.LocalReturnMainModes
-
Opstop
- OPSTOP - Static variable in class nxopen.cam.NcmWedmBuilder.GlobalStopPointTypes
-
stop points option opstop
- OPSTOP - Static variable in class nxopen.cam.WedmGeomBuilder.StopPointTypes
-
stop point option opstop
- OPSTOP - Static variable in class nxopen.cam.WedmOperationBuilder.StopPointTypes
-
stop point option opstop
- opstops() - Method in interface nxopen.cam.NcmTurnThreadBuilder
-
Returns the Opstops
License requirements: None.
- OPT_STYPE_CLS_GEOM - Static variable in class nxopen.uf.UFCam.OptStypeCls
-
- OPT_STYPE_CLS_LAST - Static variable in class nxopen.uf.UFCam.OptStypeCls
-
- OPT_STYPE_CLS_METHOD - Static variable in class nxopen.uf.UFCam.OptStypeCls
-
- OPT_STYPE_CLS_OPER - Static variable in class nxopen.uf.UFCam.OptStypeCls
-
- OPT_STYPE_CLS_PROG - Static variable in class nxopen.uf.UFCam.OptStypeCls
-
- OPT_STYPE_CLS_SETUP - Static variable in class nxopen.uf.UFCam.OptStypeCls
-
- OPT_STYPE_CLS_TOOL - Static variable in class nxopen.uf.UFCam.OptStypeCls
-
- optAddTemplatePart(String) - Method in interface nxopen.uf.UFCam
-
- optAddType(String) - Method in interface nxopen.uf.UFCam
-
- optAskClsfNames() - Method in interface nxopen.uf.UFCam
-
- OptAskClsfNamesData() - Constructor for class nxopen.uf.UFCam.OptAskClsfNamesData
-
- optAskDocNames() - Method in interface nxopen.uf.UFCam
-
- OptAskDocNamesData() - Constructor for class nxopen.uf.UFCam.OptAskDocNamesData
-
- optAskObject(UFCam.OptStypeCls, String, String) - Method in interface nxopen.uf.UFCam
-
- optAskPostNames() - Method in interface nxopen.uf.UFCam
-
- OptAskPostNamesData() - Constructor for class nxopen.uf.UFCam.OptAskPostNamesData
-
- optAskSubtypes(String, UFCam.OptStypeCls) - Method in interface nxopen.uf.UFCam
-
- OptAskSubtypesData() - Constructor for class nxopen.uf.UFCam.OptAskSubtypesData
-
- optAskTypes() - Method in interface nxopen.uf.UFCam
-
- OptAskTypesData() - Constructor for class nxopen.uf.UFCam.OptAskTypesData
-
- optData - Variable in class nxopen.uf.UFBrep.Options
-
- OPTICAL_PATH_LENGTH - Static variable in class nxopen.cae.Result.Quantity
-
- OpticalAnnotationSettingsBuilder - Interface in nxopen.ame
-
- OpticalAnnotationSettingsBuilder.AnnotationAttrType - Class in nxopen.ame
-
Represents the type of annotations
- OpticalConnectionSettingsBuilder - Interface in nxopen.ame
-
- optimalHoleAxis() - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder
-
Returns the optimal hole axis
License requirements: die_engineering ("DIE ENGINEERING")
.
- optimalPoint1() - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder
-
Returns the optimal point1
License requirements: die_engineering ("DIE ENGINEERING")
.
- optimalPoint2() - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder
-
Returns the optimal point2
License requirements: die_engineering ("DIE ENGINEERING")
.
- optimalPoint3() - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder
-
Returns the optimal point3
License requirements: die_engineering ("DIE ENGINEERING")
.
- optimization() - Method in interface nxopen.BasePart
-
Returns the optimization instance belonging to this part .
- OPTIMIZATION - Static variable in class nxopen.cae.optimization.Solver
-
Optimization
- optimization() - Method in interface nxopen.cam.HoleBossGeom
-
Returns the optimization types
License requirements: None.
- OPTIMIZATION_DISPLACEMENT - Static variable in class nxopen.cae.Result.Quantity
-
Shape Optimization; Nodal Translational displacement values
- OptimizationAttributeBuilder - Interface in nxopen.optimization
-
- optimizationBasedOn() - Method in interface nxopen.cam.OperationBuilder
-
Returns the optimization based on in operation
License requirements: None.
- OptimizationBuilder - Interface in nxopen.optimization
-
- OptimizationBuilder.OptimizationAlgorithmType - Class in nxopen.optimization
-
Algorithm type
- OptimizationBuilder.OptimizationAttributeType - Class in nxopen.optimization
-
Attribute type
- OptimizationBuilder.OptimizationConstraint - Class in nxopen.optimization
-
Defined constraint structure
- OptimizationBuilder.OptimizationConstraintLimitType - Class in nxopen.optimization
-
Constraint limit type
- OptimizationBuilder.OptimizationConvergenceSpeedType - Class in nxopen.optimization
-
Convergence speed type
- OptimizationBuilder.OptimizationObjective - Class in nxopen.optimization
-
Defined Objective Structure
- OptimizationBuilder.OptimizationTargetType - Class in nxopen.optimization
-
Optimization type for objective
- OptimizationBuilder.OptimizationVariable - Class in nxopen.optimization
-
Defined variable structure
- OptimizationCollection - Interface in nxopen.optimization
-
- OptimizationConstraint() - Constructor for class nxopen.optimization.OptimizationBuilder.OptimizationConstraint
-
- OptimizationConstraint(String, NXObject, OptimizationBuilder.OptimizationAttributeType, double, double, OptimizationBuilder.OptimizationConstraintLimitType) - Constructor for class nxopen.optimization.OptimizationBuilder.OptimizationConstraint
-
Constructor for the OptimizationConstraint object.
- optimizationDistanceMethod() - Method in interface nxopen.cam.OperationBuilder
-
Returns the optimization distance method in operation
License requirements: None.
- optimizationLevel() - Method in interface nxopen.cam.OperationBuilder
-
Returns the optimization level in operation
License requirements: None.
- optimizationManager() - Method in interface nxopen.cae.SimSimulation
-
Returns the Design and Analysis optimization manager belonging to this sim part .
- optimizationMethod() - Method in interface nxopen.cam.ParamBuilder
-
Returns the optim method
License requirements: cam_base ("CAM BASE")
.
- OptimizationObjective() - Constructor for class nxopen.optimization.OptimizationBuilder.OptimizationObjective
-
- OptimizationObjective(String, NXObject, OptimizationBuilder.OptimizationAttributeType, double) - Constructor for class nxopen.optimization.OptimizationBuilder.OptimizationObjective
-
Constructor for the OptimizationObjective object.
- optimizationSolution() - Method in interface nxopen.cae.optimization.DAOOptimizationManager
-
Returns the optimization solution collection belonging to this sim part.
- optimizationSolutions() - Method in interface nxopen.cae.optimization.TBSOptimizationManager
-
Represents the optimization solution collection belonging to this simulation .
- optimizationType() - Method in interface nxopen.optimization.OptimizationBuilder
-
Returns the optimization type
License requirements: None.
- OptimizationVariable() - Constructor for class nxopen.optimization.OptimizationBuilder.OptimizationVariable
-
- OptimizationVariable(String, NXObject, OptimizationBuilder.OptimizationAttributeType, double, double) - Constructor for class nxopen.optimization.OptimizationBuilder.OptimizationVariable
-
Constructor for the OptimizationVariable object.
- optimize() - Method in interface nxopen.AcisImporter
-
Returns the Optimize - if value set to true then redundant geometries will be removed
License requirements: None.
- optimize() - Method in interface nxopen.cae.Laminate
-
Perform laminate optimization giving the existing optimization configuration and
outputs the results to a csv file.
- optimize() - Method in interface nxopen.cae.ModelUpdateOptimOptionsBuilder
-
Do the optimization of model update
License requirements: nx_correl_update ("FE Model Update")
.
- optimize(CAMObject[], boolean, boolean, boolean) - Method in interface nxopen.cam.CAMSetup
-
Optimize
License requirements: cam_base ("CAM BASE")
.
- OPTIMIZE - Static variable in class nxopen.cam.CutParametersRegionSequencingTypes
-
Optimize
- optimize() - Method in interface nxopen.Catiav4Importer
-
Returns the optimize - if set to true then toplogy will be optimized
License requirements: None.
- optimize() - Method in interface nxopen.Catiav5Importer
-
Returns the optimize - This option allows you to optimize the topology
License requirements: None.
- optimize() - Method in interface nxopen.DxfdwgImporter
-
Returns the Optimize command - if set to true then attempt will be made to optimize 3D geometry
License requirements: None.
- optimize() - Method in interface nxopen.IgesImporter
-
Returns the optimize - set this to true if automatic optimize geometry
License requirements: None.
- optimize() - Method in interface nxopen.ProeImporter
-
Returns the Optimize - if value set to true then redundant geometries will be removed
License requirements: None.
- optimize() - Method in interface nxopen.Step203Importer
-
Returns the optimize - if set to true Optimizes geometry
License requirements: None.
- optimize() - Method in interface nxopen.Step214Importer
-
Returns the optimize - if set to true Optimizes geometry
License requirements: None.
- optimize() - Method in interface nxopen.Step242Importer
-
Returns the optimize - if set to true Optimizes geometry
License requirements: None.
- OPTIMIZE_HEIGHT - Static variable in class nxopen.mfg.am.Nester3D.Solution
-
- OPTIMIZE_HEIGHT_AND_SLICE_VOLUME - Static variable in class nxopen.mfg.am.Nester3D.Solution
-
- OPTIMIZE_SLICE_VOLUME - Static variable in class nxopen.mfg.am.Nester3D.Solution
-
- optimizeCurve() - Method in interface nxopen.preferences.PartModeling
-
Returns the optimize curve flag
License requirements: None.
- optimizeCurveAngleToleranceFactor() - Method in interface nxopen.preferences.PartModeling
-
Returns the optimize curve angle tolerance factor
License requirements: None.
- OptimizeCurveBuilder - Interface in nxopen.features
-
- optimizeCurveDistanceToleranceFactor() - Method in interface nxopen.preferences.PartModeling
-
Returns the optimize curve distance tolerance factor
License requirements: None.
- optimizeCurveToleranceFactor() - Method in interface nxopen.preferences.PartModeling
-
- OPTIMIZED - Static variable in class nxopen.cam.AreaMillingSteepContainment.CutLevelTypes
-
Optimized
- OPTIMIZED - Static variable in class nxopen.cam.CutLevel.Types
-
Optimized
- OPTIMIZED - Static variable in class nxopen.cam.FlowCutSteepContainment.CutLevelTypes
-
Optimized
- OPTIMIZED_LIMITS - Static variable in class nxopen.cae.xyplot.LimitsType
-
Type to optimize source data limits to natural axis limits
- OPTIMIZED_TO_DRIVE - Static variable in class nxopen.cam.ToolAxisVariable.Types
-
Optimized to Drive
- optimizedCutLevelColor() - Method in interface nxopen.cam.Preferences
-
Returns the optimized cut level
License requirements: None.
- OptimizeFace - Interface in nxopen.features
-
Represents a optimize face feature
To create or edit an instance of this class, use
OptimizeFaceBuilder
Created in NX7.0.0
- OptimizeFaceBuilder - Interface in nxopen.features
-
- OptimizeFeatureGeometry - Interface in nxopen.cam
-
Represents an optimize feature geometry builder
This is an abstract class and cannot be instantiated.
- optimizeFeedRateWhenGenerating() - Method in interface nxopen.cam.FeedsBuilder
-
Returns the optimize feed rate when generating
License requirements: None.
- optimizePath() - Method in interface nxopen.cam.UpDownCutting
-
Returns the optimize path toggle
License requirements: None.
- optimizerControl() - Method in interface nxopen.cae.optimization.DAOSolution
-
- optimizeSettings() - Method in interface nxopen.drawings.ViewCreationWizardBuilder
-
Returns the optimize view settings
License requirements: None.
- OptimizeTraverseGroupBuilder - Interface in nxopen.cam
-
- optimizeType - Variable in class nxopen.mechatronics.CamProfileBuilder.Element
-
traversal segment optimization type of traverse type
- option() - Method in interface nxopen.cam.Cycle
-
Returns the option type
License requirements: None.
- option() - Method in interface nxopen.cam.PitchSetting
-
Returns the pitch option
License requirements: None.
- option() - Method in interface nxopen.cam.TrimPoint
-
Returns the trim point option
License requirements: None.
- OPTION - Static variable in class nxopen.cam.UdeParameter.ParameterTypes
-
- option() - Method in interface nxopen.cam.ZAxisSmoothing
-
Returns the z axis smoothing option.
- option() - Method in interface nxopen.drawings.DrawingSheetBuilder
-
Returns the option to be used to create the drawing sheet
License requirements: None.
- option() - Method in interface nxopen.features.ChamferBuilder
-
Returns the chamfer parameter option.
- OPTION - Static variable in class nxopen.features.DeformDefinitionBuilder.ExpressionType
-
Input is from a set of fixed values.
- option() - Method in interface nxopen.features.EmbossProjection
-
Returns the projection option
License requirements: solid_modeling ("SOLIDS MODELING")
.
- OPTION - Static variable in class nxopen.features.shipdesign.ShipnameFieldBuilderType
-
Field whose value can be one of several strings
- option() - Method in interface nxopen.geometricutilities.FeatureOffset
-
Returns the Offset option
License requirements: None.
- option() - Method in interface nxopen.geometricutilities.ModlMotion
-
Returns the options.
- option - Variable in class nxopen.uf.UFSo.DirrOnSurfData
-
- option - Variable in class nxopen.uf.UFSo.OffsetSurfCvtrData
-
- option - Variable in class nxopen.uf.UFUi.PickCsysData
-
- option - Variable in class nxopen.uf.UFUi.SpecifyCsysData
-
- OPTION - Static variable in class nxopen.weld.CharacteristicsValueBuilder.Type
-
Indicates the attribute value contains a pre set list of strings.
- OPTION_MENU - Static variable in class nxopen.uistyler.Dialog.ItemType
-
- OPTION_MENU - Static variable in class nxopen.uistyler.StylerItem.ItemType
-
Option Menu item
- OPTION_TOGGLE - Static variable in class nxopen.uistyler.Dialog.ItemType
-
- OPTION_TOGGLE - Static variable in class nxopen.uistyler.StylerItem.ItemType
-
Option Toggle item
- OPTION_TOGGLE_VALUE - Static variable in class nxopen.uistyler.StylerEvent.Indicator
-
Option toggle value
- OPTION_VALUE - Static variable in class nxopen.tooling.SpreadsheetData.ParameterStatus
-
The parameter has multiple value, but not treated as key parameter
- OPTION_VALUE - Static variable in class nxopen.tooling.SpreadsheetDataParameter.Status
-
The parameter has multiple value, but not treated as key parameter
- optional() - Method in interface nxopen.cae.DurSpecialistAnalysisTypeBuilder
-
Returns the optional simulation object proxies
License requirements: None.
- optional() - Method in interface nxopen.report.BaseArgument
-
Returns a value that indicates whether this argument is optional or not.
- optionalStrings - Variable in class nxopen.uf.UFDrf.CustomSymbolText
-
- optionMask() - Method in interface nxopen.blockstyler.OnPathDimension
-
Returns the OptionMask
License requirements: None.
- OptionMenu - Interface in nxopen.uistyler
-
Represents a OptionMenu for UI Styler.
- OptionMenu.Activate - Interface in nxopen.uistyler
-
Called when a dialog user selects an option from the menu.
- optionMenuTitle() - Method in interface nxopen.blockstyler.OnPathDimension
-
Returns the OptionMenuTitle
License requirements: None.
- Options() - Constructor for class nxopen.uf.UFAssem.Options
-
- Options(int, int, int, int, int, int, int, int, int, int, int, int, int, int, int, int, int) - Constructor for class nxopen.uf.UFAssem.Options
-
- Options() - Constructor for class nxopen.uf.UFBrep.Options
-
- Options(int, int, double) - Constructor for class nxopen.uf.UFBrep.Options
-
- options - Variable in class nxopen.uf.UFBrep.Options
-
- Options() - Constructor for class nxopen.validate.XmlComparator.Options
-
- Options(String, String, String, boolean, boolean, boolean, boolean, boolean) - Constructor for class nxopen.validate.XmlComparator.Options
-
Constructor for the Options object.
- optionsColor01() - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
Returns the 1st color used for displaying the thickness analysis results on the Options Tab page.
- optionsColor02() - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
Returns the 2nd color used for displaying the thickness analysis results on the Options Tab page.
- optionsColor03() - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
Returns the 3rd color used for displaying the thickness analysis results on the Options Tab page.
- optionsColor04() - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
Returns the 4th color used for displaying the thickness analysis results on the Options Tab page.
- optionsColor05() - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
Returns the 5th color used for displaying the thickness analysis results on the Options Tab page.
- optionsColor06() - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
Returns the 6th color used for displaying the thickness analysis results on the Options Tab page.
- optionsColor07() - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
Returns the 7th color used for displaying the thickness analysis results on the Options Tab page.
- optionsColor08() - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
Returns the 8th color used for displaying the thickness analysis results on the Options Tab page.
- optionsColor09() - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
Returns the 9th color used for displaying the thickness analysis results on the Options Tab page.
- optionsColor10() - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
Returns the 10th color used for displaying the thickness analysis results on the Options Tab page.
- optionsColor11() - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
Returns the 11th color used for displaying the thickness analysis results on the Options Tab page.
- optionsColor12() - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
Returns the 12th color used for displaying the thickness analysis results on the Options Tab page.
- optionsCreateBall() - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
- optionsCreateThicknessText() - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
Returns the option to create text for the thickness results.
- optionsDisplayDynamicBall() - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
- optionsDisplayMeshElements() - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
Returns the option to mesh elements.
- optionsDisplayOppositeMeshElements() - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
Returns the option to display opposite mesh elements.
- optionsDisplayThicknessVectors() - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
Returns the option to display the thickness ray vectors.
- optionsDynamicSnapToVertex() - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
Returns the option to snap to vertex for displaying dynamic thickness results.
- optionSetting() - Method in interface nxopen.cae.ftk.FTKManager
-
Returns the
OptionSetting
belonging to this session
Created in NX3.0.0
- OptionSetting - Interface in nxopen.cae.ftk
-
Manager the options data for AFU Data Record
Not support KF.
- OptionSetting.RecordOptionData - Class in nxopen.cae.ftk
-
- optionsLegendControl() - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
Returns the legend control for displaying the thickness analysis results on the Options Tab page.
- optionsLowerLimit01() - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
Returns the 1st lower range limit used for displaying the thickness analysis results on the Options Tab page.
- optionsLowerLimit02() - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
Returns the 2nd lower range limit used for displaying the thickness analysis results on the Options Tab page.
- optionsLowerLimit03() - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
Returns the 3rd lower range limit used for displaying the thickness analysis results on the Options Tab page.
- optionsLowerLimit04() - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
Returns the 4th lower range limit used for displaying the thickness analysis results on the Options Tab page.
- optionsLowerLimit05() - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
Returns the 5th lower range limit used for displaying the thickness analysis results on the Options Tab page.
- optionsLowerLimit06() - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
Returns the 6th lower range limit used for displaying the thickness analysis results on the Options Tab page.
- optionsLowerLimit07() - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
Returns the 7th lower range limit used for displaying the thickness analysis results on the Options Tab page.
- optionsLowerLimit08() - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
Returns the 8th lower range limit used for displaying the thickness analysis results on the Options Tab page.
- optionsLowerLimit09() - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
Returns the 9th lower range limit used for displaying the thickness analysis results on the Options Tab page.
- optionsLowerLimit10() - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
Returns the 10th lower range limit used for displaying the thickness analysis results on the Options Tab page.
- optionsLowerLimit11() - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
Returns the 11th lower range limit used for displaying the thickness analysis results on the Options Tab page.
- optionsLowerLimit12() - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
Returns the 12th lower range limit used for displaying the thickness analysis results on the Options Tab page.
- OptionsManager - Interface in nxopen.options
-
Manages options.
- optionsManager() - Method in interface nxopen.Session
-
Returns the
OptionsManager
instance belonging to this session
Created in NX3.0.0
- OptionsManager.ReorderSelectableStringListValueData - Class in nxopen.options
-
- optionsNumberOfColors() - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
Returns the number of colors used for displaying the thickness analysis results on the Options Tab page.
- optionsNumDecimals() - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
Returns the number of decimal places for thickness output.
- optionsRangeHighLimit() - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
Returns the thickness high limit used for displaying the thickness analysis results on the Options Tab page.
- optionsRangeLowLimit() - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
Returns the thickness low limit used for displaying the thickness analysis results on the Options Tab page.
- optionsRangeType() - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
Returns the range type for displaying the thickness analysis results on the Options Tab page.
- optionsSaveThicknessVectorsAsLines() - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
Returns the option to create permanent lines as the thickness ray vectors.
- OptionsScope - Class in nxopen.options
-
Represents the scope of an option.
- optionsUpperLimit01() - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
Returns the 1st upper range limit used for displaying the thickness analysis results on the Options Tab page.
- optionsUpperLimit02() - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
Returns the 2nd upper range limit used for displaying the thickness analysis results on the Options Tab page.
- optionsUpperLimit03() - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
Returns the 3rd upper range limit used for displaying the thickness analysis results on the Options Tab page.
- optionsUpperLimit04() - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
Returns the 4th upper range limit used for displaying the thickness analysis results on the Options Tab page.
- optionsUpperLimit05() - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
Returns the 5th upper range limit used for displaying the thickness analysis results on the Options Tab page.
- optionsUpperLimit06() - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
Returns the 6th upper range limit used for displaying the thickness analysis results on the Options Tab page.
- optionsUpperLimit07() - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
Returns the 7th upper range limit used for displaying the thickness analysis results on the Options Tab page.
- optionsUpperLimit08() - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
Returns the 8th upper range limit used for displaying the thickness analysis results on the Options Tab page.
- optionsUpperLimit09() - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
Returns the 9th upper range limit used for displaying the thickness analysis results on the Options Tab page.
- optionsUpperLimit10() - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
Returns the 10th upper range limit used for displaying the thickness analysis results on the Options Tab page.
- optionsUpperLimit11() - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
Returns the 11th upper range limit used for displaying the thickness analysis results on the Options Tab page.
- optionsUpperLimit12() - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
Returns the 12th upper range limit used for displaying the thickness analysis results on the Options Tab page.
- optionText() - Method in interface nxopen.cam.UdeParameter
-
Returns the option utf8 value of the parameter
License requirements: None.
- OptionToggle - Interface in nxopen.uistyler
-
Represents a OptionToggle for UI Styler .
- OptionToggle.Activate - Interface in nxopen.uistyler
-
Called when a dialog user selects an option from the menu
- OptionToggle.ItemValueData - Class in nxopen.uistyler
-
- OptionToggle.ValueChanged - Interface in nxopen.uistyler
-
Called when a dialog user clicks on the button or presses the spacebar when the button has keyboard focus.
- optionType() - Method in interface nxopen.drawings.MultipleViewPlacementBuilder
-
Returns the placement option
License requirements: None.
- OptionType - Class in nxopen.options
-
Describes type of an option.
- optionUpdateSubsetOnLoad() - Method in interface nxopen.LoadOptions
-
Returns the option that controls the subset updates during load
License requirements: None.
- optionValue() - Method in interface nxopen.cam.UdeParameter
-
- OR - Static variable in class nxopen.ame.EditClauseBuilder.QueryClauseOperatorType
-
- OR - Static variable in class nxopen.mechatronics.GanttLinkerBuilder.LinkerLogicType
-
Or
- OR_CONDITION - Static variable in class nxopen.visualreporting.Condition.TypeOption
-
- ORANGE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- ORANGE_ORANGE_RED_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- ORANGE_ORANGE_YELLOW_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- ORBIT - Static variable in class nxopen.cae.xyplot.ComplexOption3D
-
Orbit for 3D plot
- orbitPointList() - Method in interface nxopen.tooling.UndersizeBuilder
-
Returns the points to be used as copy positions to undersize electrode
License requirements: None.
- orbitSize() - Method in interface nxopen.tooling.UndersizeBuilder
-
Returns the orbit size which determines the radius of the distribution circle
License requirements: None.
- orbitType() - Method in interface nxopen.tooling.UndersizeBuilder
-
Returns the orbit type
License requirements: None.
- OrCreateEmptyRegionData() - Constructor for class nxopen.tooling.MWDefineRegionsBuilder.OrCreateEmptyRegionData
-
- ORDARROW_LINE_DISPLAY - Static variable in class nxopen.uf.UFDrf.OrdarrowLineType
-
- ORDARROW_LINE_NO_DISPLAY - Static variable in class nxopen.uf.UFDrf.OrdarrowLineType
-
- ORDDIMENSION_DOGLEG - Static variable in class nxopen.uf.UFDrf.DoglegType
-
- ORDDIMENSION_NO_DOGLEG - Static variable in class nxopen.uf.UFDrf.DoglegType
-
- OrddispInfo() - Constructor for class nxopen.uf.UFDrf.OrddispInfo
-
- OrddispInfo(UFDrf.QuadrantType, UFDrf.OrdoriginDisplayType, String, UFDrf.OrdarrowLineType, int) - Constructor for class nxopen.uf.UFDrf.OrddispInfo
-
- Order - Interface in nxopen.assemblies
-
Represents base class for all Order classes.
- order - Variable in class nxopen.cae.AfuMathFastRMSInfo.Data
-
the order
- ORDER - Static variable in class nxopen.cae.ElementModifyOrderBuilder.Operation
-
changes the order of a mesh from linear to parabolic or vice versa
- order() - Method in interface nxopen.cae.FEElement
-
Returns the element order
License requirements: None.
- ORDER - Static variable in class nxopen.cae.ftk.DataManager.AfuRecordZValue
-
The z value is attribute of Order field in an afu record
- ORDER - Static variable in class nxopen.cae.XyFunctionMeasure
-
Order unit
- order() - Method in interface nxopen.cam.DmCmMultiplePassesCiBuilder
-
Returns the Order
License requirements: cam_base ("CAM BASE")
.
- order() - Method in interface nxopen.cam.MultiplePassesBuilder
-
Returns the Order
License requirements: None.
- order() - Method in interface nxopen.positioning.ConstraintReference
-
Returns
the order of the constraint reference within its constraint.
- order() - Method in interface nxopen.Spline
-
Returns the order of the spline
License requirements: None.
- order - Variable in class nxopen.uf.UFCurve.Spline
-
- order - Variable in class nxopen.uf.UFEval.Spline
-
- ORDER - Static variable in class nxopen.uf.UFUiOnt.TreeMode
-
- Order.State - Class in nxopen.assemblies
-
Represents whether an order is saved or not
- Order.Type - Class in nxopen.assemblies
-
Represents the type of an order
- ORDER_CUT - Static variable in class nxopen.cae.SimLoadRecipeTypes.DataTypes
-
Order Cut
- ORDER_LIST - Static variable in class nxopen.ame.DocumentType
-
- ORDER_LIST - Static variable in class nxopen.ame.PageBuilder.Types
-
- ORDER_OF_SELECTION - Static variable in class nxopen.cae.CAEConnectionBuilder.MethodTypeEnum
-
In order of selection
- ORDER_ORDER - Static variable in class nxopen.cae.XyFunctionUnit
-
Order unit: order
- orderAspects() - Method in interface nxopen.ame.AspectNavigatorPreferencesBuilder
-
Returns the order aspects builder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- OrderAspectsBuilder - Interface in nxopen.ame
-
- OrderAspectsBuilder.OrderType - Class in nxopen.ame
-
possible choices for order of navigator objects
- OrderAspectsBuilder.SortType - Class in nxopen.ame
-
possible choices for sorting of navigator objects in a set
- OrderCollection - Interface in nxopen.assemblies
-
- ORDERED_DITHER - Static variable in class nxopen.ModelingViewHighQualityImage.DisplayTechniqueType
-
A color dither matrix screens pixel colors.
- OrderedEdgeElemMethod - Interface in nxopen.cae
-
Represents the output from the ordered edge element smart selector method
To obtain an instance of this class use CAE::SmartSelectionManager
.
- OrderedEdgeNodeMethod - Interface in nxopen.cae
-
Represents the output from the ordered edge node smart selector method
To obtain an instance of this class use CAE::SmartSelectionManager
.
- OrderedElementGroup - Interface in nxopen.pdm
-
Represents a base class that provides common methods for ordered elements group in a
ElementGroup
.
- OrderedFeatureEdgeElemMethod - Interface in nxopen.cae
-
Represents the output from the ordered feature edge element smart selector method
To obtain an instance of this class use CAE::SmartSelectionManager
.
- OrderedFeatureEdgeNodeMethod - Interface in nxopen.cae
-
Represents the output from the ordered feature edge node smart selector method
To obtain an instance of this class use CAE::SmartSelectionManager
.
- OrderedSelection - Interface in nxopen.cae
-
Represents list of ordered selection entitites .
- orderGridCount() - Method in interface nxopen.cae.xyplot.GridStyle2DColorContour
-
Returns the count of order grid
License requirements: None.
- orderInterval() - Method in interface nxopen.cae.xyplot.GridStyle2DColorContour
-
Returns the interval of order line
License requirements: None.
- OrderManager - Interface in nxopen.drawings
-
Represents an object that manages orders.
- orderManagers() - Method in interface nxopen.layout2d.ComponentCollection
-
Returns the OrderManager for part .
- orderRegionsType() - Method in interface nxopen.cam.DmAmBuilder
-
Returns the Order Regions Type
License requirements: None.
- ordersSet() - Method in interface nxopen.assemblies.ComponentAssembly
-
The collection of
Order
s defined in the ComponentAssembly
Created in NX9.0.0
- orderState() - Method in interface nxopen.assemblies.Order
-
Returns the state of
Order
.
- orderType() - Method in interface nxopen.assemblies.Order
-
Returns the type of
Order
.
- orderU - Variable in class nxopen.uf.UFModl.Bsurface
-
- orderV - Variable in class nxopen.uf.UFModl.Bsurface
-
- orderValue() - Method in interface nxopen.ame.SortingBlockBuilder
-
Returns the sorting order type
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- orderValue() - Method in interface nxopen.cae.AfuZHeaderInfo
-
Returns the value of order field
License requirements: None.
- ordinal() - Method in class nxopen.Enum
-
Returns an integer value for this enum
- ORDINARY - Static variable in class nxopen.annotations.PartsListBuilder.PartsListShowLockedDeletedRows
-
- ORDINARY - Static variable in class nxopen.annotations.TabularNoteStyleBuilder.ShowLockedDeletedRowMethod
-
Ordinary
- ORDINATE - Static variable in class nxopen.annotations.SearchCriteriaDimensionBuilder.DimensionTypes
-
Ordinate
- ordinate() - Method in interface nxopen.annotations.TableEditSettingsBuilder
-
Returns the ordinate style builder
License requirements: None.
- ORDINATE_HORIZONTAL - Static variable in class nxopen.annotations.DimensionType
-
Horizontal Ordinate dimension
- ORDINATE_ORIGIN - Static variable in class nxopen.annotations.DimensionType
-
Ordinate Origin dimension
- ORDINATE_SET_NAME - Static variable in class nxopen.annotations.OrdinateOriginDisplayOption
-
Displays the ordinate set name at the ordinate origin
- ORDINATE_VERTICAL - Static variable in class nxopen.annotations.DimensionType
-
Vertical Ordinate dimension
- OrdinateBaselineBuilder - Interface in nxopen.annotations
-
Represents a builder for an ordinate baseline
This is a sub-builder class and cannot be directly instantiated
.
- ordinateCustomMarkerLabel() - Method in interface nxopen.cae.xyplot.PlotGraphTemplate
-
Returns the ordinate custom marker label
License requirements: None.
- OrdinateDimension - Interface in nxopen.annotations
-
Represents an ordinate dimension
Abstract class
.
- ordinateDimension() - Method in interface nxopen.tooling.EWDraftingBuilder
-
Returns the option used to set ordinate dimension.
- OrdinateDimension.DoglegPreferences - Class in nxopen.annotations
-
Specifies the ordinate dogleg preferences
- OrdinateDimensionBuilder - Interface in nxopen.annotations
-
- OrdinateDimensionPreferences - Interface in nxopen.annotations
-
Represents ordinate dimension preferences .
- ordinateDimensionStyle() - Method in interface nxopen.tooling.AutoDimensionBuilder
-
Returns the ordinate dimension style
License requirements: None.
- OrdinateDoglegCreationOption - Class in nxopen.annotations
-
Specifies the dogleg creation option when creating/editing the ordinate dimension
- OrdinateDoglegDefinition - Class in nxopen.annotations
-
Specifies the ordinate dimension dogleg definition
A - Start offset
B - End offset
C - Dog leg angle
_____________ Dimension Line
|
|
B |
_______ |
A /
/
- OrdinateLineArrowDisplayOption - Class in nxopen.annotations
-
Specifies the ordinate dimension line and arrow display option
- OrdinateMargin - Interface in nxopen.annotations
-
Represents an ordinate margin.
- OrdinateMarginCollection - Interface in nxopen.annotations
-
- ordinateMargins() - Method in interface nxopen.annotations.AnnotationManager
-
OrdinateMargin collection .
- ordinateOrigin() - Method in interface nxopen.annotations.BaseOrdinateDimensionBuilder
-
Returns the ordinate origin
License requirements: None.
- ordinateOrigin() - Method in interface nxopen.annotations.HoleTableBuilder
-
Returns the Ordinate Origin of the hole table
License requirements: None.
- ordinateOrigin() - Method in interface nxopen.tooling.HoleReportBuilder
-
Returns the ordinate origin to get the coords in given ordinate
License requirements: None.
- OrdinateOriginDimension - Interface in nxopen.annotations
-
Represents an ordinate origin dimension
There is no KF creator for this class.
- OrdinateOriginDisplayOption - Class in nxopen.annotations
-
Specifies the ordinate origin dimension display option
- OrdinatePositiveDirection - Class in nxopen.annotations
-
Specifies the positive direction for ordinate dimensions
- ordinateStyle() - Method in interface nxopen.annotations.StyleBuilder
-
Returns the ordinate style builder
License requirements: None.
- OrdinateStyleBuilder - Interface in nxopen.annotations
-
- ordinateTextAngle() - Method in interface nxopen.annotations.OrdinateStyleBuilder
-
Returns the ordinate text angle
License requirements: None.
- ordinateTextOrientation() - Method in interface nxopen.annotations.OrdinateStyleBuilder
-
Returns the ordinate text orientation
License requirements: None.
- ordinateType - Variable in class nxopen.cae.AfuData.AbscissaAndOrdinateAxisDefinitionData
-
Ordinate data type
- ordinateType - Variable in class nxopen.cae.ftk.OptionSetting.RecordOptionData
-
Ordinate data type
- ordinateView() - Method in interface nxopen.tooling.AutoDimensionBuilder
-
Returns the ordinate view tag
License requirements: None.
- ORDORIGIN_HOR_VER_DIM - Static variable in class nxopen.uf.UFDrf.OrdoriginDisplayType
-
- ORDORIGIN_HORIZONTAL_DIM - Static variable in class nxopen.uf.UFDrf.OrdoriginDisplayType
-
- ORDORIGIN_NAME - Static variable in class nxopen.uf.UFDrf.OrdoriginDisplayType
-
- ORDORIGIN_UD_SYMBOL - Static variable in class nxopen.uf.UFDrf.OrdoriginDisplayType
-
- ORDORIGIN_VERTICAL_DIM - Static variable in class nxopen.uf.UFDrf.OrdoriginDisplayType
-
- oremoveButton() - Method in interface nxopen.display.TrueShadingBuilder
-
Removes override material from selected object(s)
License requirements: None.
- orgin - Variable in class nxopen.routing.OffsetPath.OffsetReferenceAxesData
-
origin for the offset object
- ORI_ANGLE - Static variable in class nxopen.cae.CaeElementAssociatedDataUtilsMatOrientationMethod
-
Specify an angle to orient the material.
- oriCsystem() - Method in interface nxopen.cae.BushingEADBuilder
-
Returns the get coordinate system method gets the coordinate system for orienting by coordinate system
License requirements: nx_masterfem ("Finite Element Modeling")
.
- oriCsystem() - Method in interface nxopen.cae.GapEADBuilder
-
Returns the get coordinate system method gets the coordinate system for orienting by coordinate system
License requirements: nx_masterfem ("Finite Element Modeling")
.
- oriDirr() - Method in interface nxopen.cae.BushingEADBuilder
-
Returns the get oriDirr operator gets orientaion vector value
License requirements: nx_masterfem ("Finite Element Modeling")
.
- oridirr - Variable in class nxopen.cae.ElementAssociatedDataUtils.AskBushingData
-
Orientation vector.
- oridirr - Variable in class nxopen.cae.ElementAssociatedDataUtils.AskGapData
-
Orientation vector.
- oriDirr() - Method in interface nxopen.cae.GapEADBuilder
-
Returns the get oriDirr operator gets orientaion vector value
License requirements: nx_masterfem ("Finite Element Modeling")
.
- orienation - Variable in class nxopen.cae.modelcheck.ElementMaterialOrientationCheckBuilder.DoCheckData
-
material orientation vector
- ORIENT - Static variable in class nxopen.cam.OperationBuilder.OptimizationBasedOnTypes
-
orient
- orient() - Method in interface nxopen.drawings.ViewStyleDetailBuilder
-
Returns the orient toggle on the DETAIL tab of the View Style Dialog
License requirements: None.
- orient() - Method in interface nxopen.drawings.ViewStyleProjectedBuilder
-
Returns the projected view style orient toggle on the PROJECTED tab of the View Style Dialog
License requirements: None.
- orient() - Method in interface nxopen.drawings.ViewStyleSectionConstraintsBuilder
-
Returns the orient toggle on the SECTION CONSTRAINTS tab of the View Style Dialog
License requirements: None.
- ORIENT - Static variable in class nxopen.MeshProfileString.Type
-
- orient(Matrix3x3) - Method in interface nxopen.View
-
Changes the view orientation relative to the specified absolute coordinate system.
- orient(View.Canned, View.ScaleAdjustment) - Method in interface nxopen.View
-
Changes the view orientation to a specified canned view.
- orient(String, View.ScaleAdjustment) - Method in interface nxopen.View
-
Changes the view orientation to a specified view.
- ORIENT_ANGLE - Static variable in class nxopen.positioning.Constraint.Type
-
Two geometries have a specified angle between them about an axis
- ORIENT_MACHINE_ZERO_TO_MAIN_MCS - Static variable in class nxopen.cam.NcmctPartMountingBuilder.PositioningTypes
-
Orient Machine Zero to main MCS
- ORIENT_STOCK - Static variable in class nxopen.routing.CustomManager.DesignRuleReason
-
Called after the Orient Stock command.
- ORIENT_STOCK - Static variable in class nxopen.routing.DesignRuleViolationCollection.Reason
-
- ORIENT_WCS_TO_MCS - Static variable in class nxopen.uf.UFCamPref.CamPref
-
- ORIENT_XPRESS - Static variable in class nxopen.features.LinearDimensionBuilder.OrientationOptionType
-
Orientation option using Orient Xpress
- ORIENT_XPRESS - Static variable in class nxopen.mechanicalrouting.TransformBlockBuilder.Transformtype
-
OrientXpress allows you to move a point constrained to a coordinate axis or plane in wcs.
- orientAngleBuilder() - Method in interface nxopen.cam.TurningToolBuilder
-
Returns the orient angle builder (inheritable double)
License requirements: cam_base ("CAM BASE")
.
- ORIENTATED_SEARCH - Static variable in class nxopen.cae.connections.NodalPairingMethod
-
Oriented Search
- orientation() - Method in interface nxopen.annotations.BaseChamferDimensionBuilder
-
Returns the orientation of linear chamfer dimension
License requirements: None.
- orientation() - Method in interface nxopen.annotations.DimensionStyleBuilder
-
Returns the dimension text orientation
License requirements: None.
- orientation - Variable in class nxopen.assemblies.Component.PositionData
-
The orientation of this component
- orientation - Variable in class nxopen.assemblies.DesignElementBuilder.PositionData
-
- ORIENTATION - Static variable in class nxopen.AutomaticTraceline.ModeOption
-
Align with orientation
- orientation() - Method in interface nxopen.AutomaticTraceline
-
Returns the orientation of the traceline
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- orientation() - Method in interface nxopen.cae.LaminatePly
-
Returns the ply orientation angle in degrees, relative to local material orientation
License requirements: None.
- orientation() - Method in interface nxopen.cae.LbcAssociationMgr
-
Returns the export orientation option
License requirements: None.
- orientation() - Method in interface nxopen.cae.xyplot.TextStyleSetting
-
Returns the text orientation.
- orientation() - Method in interface nxopen.cam.Cycle
-
Returns the orientation
License requirements: None.
- orientation() - Method in interface nxopen.CoordinateSystem
-
Returns the orientation matrix of the coordinate system
License requirements: None.
- orientation() - Method in interface nxopen.die.ClearanceBuilder
-
Returns the projection plane for the closed profiles to define the clearance areas.
- orientation() - Method in interface nxopen.die.WearPlateLocChildBuilder
-
Returns the orientation plane of die wear plate and locators
License requirements: ug_die_design ("Die Design")
.
- orientation() - Method in interface nxopen.display.PointCloudClippingBoxesListItemBuilder
-
Returns the orientation of clipping box
License requirements: None.
- orientation() - Method in interface nxopen.drawings.SvtBuilder
-
Returns the orientation flag that indicates whether or not the Section View Tool view should be used to orient the section view when it is placed
License requirements: drafting ("DRAFTING")
.
- orientation() - Method in interface nxopen.drawings.ViewStyle
-
Returns object for doing View style settings applicable to Orientation .
- ORIENTATION - Static variable in class nxopen.features.FitSurfaceBuilder.DirectionType
-
Orientation will specify the direction and U/V orientation.
- orientation() - Method in interface nxopen.features.HumanBuilder
-
Returns the human orientaion
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- orientation() - Method in interface nxopen.features.LatticeBuilder
-
Returns the orientation matrix of unit cell patterning in the lattice creation.
- orientation - Variable in class nxopen.features.RPOBuilder.ReferenceDirectionData
-
Orientation of reference
- orientation() - Method in interface nxopen.features.sheetmetal.FlatPatternBuilder
-
Returns the option which decides if the flattened solid will be transformed to Absolute CSYS.
- orientation() - Method in interface nxopen.features.sheetmetal.FlatSolidBuilder
-
Returns the option which decides if the flattened solid will be transformed to Absolute CSYS.
- orientation() - Method in interface nxopen.features.shipdesign.PenetrationCutoutBuilder
-
Returns the orientation
License requirements: None.
- orientation() - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder
-
Returns the orientation
License requirements: None.
- ORIENTATION - Static variable in class nxopen.geometricanalysis.DraftAnalysisBuilder.DrawDirection
-
orientation;
- orientation - Variable in class nxopen.HumanData.XformData
-
- orientation - Variable in class nxopen.HumanPosturePredictionBuilder.HandFootCsysData
-
the orientation of hand or foot
- orientation - Variable in class nxopen.layout2d.CreateComponentFrom3DBuilder.ProjectionPlaneData
-
- orientation() - Method in interface nxopen.MeasureAngleBuilder
-
Returns the orientation
License requirements: None.
- orientation() - Method in interface nxopen.mechatronics.AlignBodyBuilder
-
Returns the orientation of snap point.
- orientation() - Method in interface nxopen.mechatronics.CollisionShapeBuilder
-
Returns the orientation.
- orientation() - Method in interface nxopen.mechatronics.InclinometerBuilder
-
Returns the orientation.
- orientation() - Method in interface nxopen.mechatronics.RigidBodyBuilder
-
Returns the orientation.
- orientation() - Method in interface nxopen.mechatronics.TransmitterExitBuilder
-
Returns the initial orientation of receiving objects.
- orientation() - Method in interface nxopen.motion.BushingDefine
-
Returns the matrix of bushing
License requirements: mechanisms ("MECHANISMS")
.
- ORIENTATION - Static variable in class nxopen.motion.JointDefine.Type
-
The coordinate system of one part so that it cannot rotate with respect
to a second part.
- orientation - Variable in class nxopen.pdm.DesignElementRevision.TransformData
-
- ORIENTATION - Static variable in class nxopen.preferences.GeneralDisplayIdOption
-
Orientation
- orientation() - Method in interface nxopen.preferences.SessionVisualizationHighQualityImage
-
Returns the orientation for the High Quality Image (portrait or landscape).
- orientation() - Method in interface nxopen.PrintBuilder
-
Returns the orientation.
- orientation - Variable in class nxopen.routing.electrical.CablewaysLayoutView.ViewMatrixAndOriginData
-
- orientation() - Method in interface nxopen.Sketch
-
Returns the orientation matrix of the local coordinate system of the sketch
License requirements: None.
- orientation - Variable in class nxopen.uf.UFAssem.AskOrientationData
-
- orientation - Variable in class nxopen.uf.UFDrf.DimensionPreferences
-
- orientation - Variable in class nxopen.uf.UFDrf.DimensionPreferences1
-
- orientation - Variable in class nxopen.uf.UFFltr.AskBoxOfAssyData
-
- orientation - Variable in class nxopen.uf.UFGdt.TargetDiaArea
-
- orientation - Variable in class nxopen.uf.UFGdt.TargetRectArea
-
- orientation - Variable in class nxopen.uf.UFModlFeatures.AskSweepData
-
- orientation() - Method in interface nxopen.weld.WeldFillBuilder
-
Returns the coordinate system that defines the alignment of the strips and rectangle.
- orientation() - Method in interface nxopen.Xform
-
Returns the orientation
License requirements: None.
- ORIENTATION_CONSTRAINT - Static variable in class nxopen.motion.TextBasedElementBuilder.TypeChoices
-
- ORIENTATION_FORWARD - Static variable in class nxopen.uf.UFBrep.Orientation
-
- ORIENTATION_NONE - Static variable in class nxopen.uf.UFBrep.Orientation
-
- ORIENTATION_PLANE - Static variable in class nxopen.annotations.FeatureControlFrameIndicatorBuilder.FcfIndicatorType
-
- ORIENTATION_REVERSE - Static variable in class nxopen.uf.UFBrep.Orientation
-
- orientationAngle() - Method in interface nxopen.features.shipdesign.EdgeReinforcementBuilder
-
Returns the angle to use for the edge reinforcement orientation.
- orientationAngle() - Method in interface nxopen.features.shipdesign.EditStockBuilder
-
- orientationAngle() - Method in interface nxopen.features.shipdesign.PillarSystemBuilder
-
Returns the angle at which to orient the stock shape.
- orientationAngle() - Method in interface nxopen.features.shipdesign.SplitStandardPartBuilder
-
Returns the orientation angle relative to the split curve or plane to split the standard part.
- orientationAngle() - Method in interface nxopen.features.shipdesign.StiffenerSystemBuilder
-
Returns the angle at which the stiffener system is placed relative to the reference.
- orientationAngle() - Method in interface nxopen.features.shipdesign.SubSystemBuilder
-
Returns the angle at which the stiffener system is placed relative to the reference.
- orientationAngle() - Method in interface nxopen.mechanicalrouting.StockBuilder
-
Returns the angle.
- OrientationAngleMethodsBuilder - Interface in nxopen.features.shipdesign
-
This class defines the method of angle definition used in the definition of the region's orientation.
- OrientationAngleMethodsBuilder.AlignAtTypes - Class in nxopen.features.shipdesign
-
Is the angle to be aligned with the region adjacent to start of this region or adjacent to the end of this region.
- OrientationAngleMethodsBuilder.MethodTypes - Class in nxopen.features.shipdesign
-
Settings used to determine how the angle is defined.
- orientationAnglePillar() - Method in interface nxopen.features.shipdesign.EditStockBuilder
-
Returns the angle at which the pillar system is placed relative to the reference.
- orientationAngleRule() - Method in interface nxopen.features.shipdesign.FeatureParmsBuilder
-
Returns the angle rule to use when measuring angles.
- orientationAngleRule() - Method in interface nxopen.features.shipdesign.StiffenerBuilder
-
Returns the angle rule to use when measuring angles.
- orientationBySupport() - Method in interface nxopen.features.shipdesign.StiffenerBySupportPathBuilder
-
Returns the flag to indicate whether the orientation of the stiffener is aligned to the start boundary.
- orientationCoordinateSystem() - Method in interface nxopen.cae.BeamElementInfo
-
Returns the beam orientation coordinate system.
- orientationCsys() - Method in interface nxopen.features.sheetmetal.FlatPatternBuilder
-
Returns the orientation csys
This is applicable to flat pattern features created (or renewed) in NX12 and later release.
- orientationCsys() - Method in interface nxopen.features.sheetmetal.FlatSolidBuilder
-
Returns the orientation csys
This is applicable to flat solid features created (or renewed) in NX12 and later release.
- orientationCsys() - Method in interface nxopen.features.shipdesign.PinJigBuilder
-
Returns the orientation csys that defines the final orientation of the plates.
- orientationCurve() - Method in interface nxopen.geometricutilities.OrientationMethodBuilder
-
Returns the orientation curve.
- OrientationData() - Constructor for class nxopen.Conic.OrientationData
-
- OrientationData() - Constructor for class nxopen.features.BlockFeatureBuilder.OrientationData
-
- OrientationData() - Constructor for class nxopen.routing.EditLineSegmentBuilder.OrientationData
-
- OrientationData() - Constructor for class nxopen.uf.UFSf.OrientationData
-
- OrientationData(Tag, double[], double[], double[]) - Constructor for class nxopen.uf.UFSf.OrientationData
-
- OrientationDefinition - Interface in nxopen.features.shipdesign
-
Represents a Orientation SubObject.
- orientationDefinitionBuilder() - Method in interface nxopen.features.shipdesign.EdgeReinforcementBuilder
-
Returns the builder used to define the orientation for the edge reinforcement system.
- OrientationDefinitionBuilder - Interface in nxopen.features.shipdesign
-
This class defines the top level object for use in definining the orientation
of stiffeners and edge reinforcements.
- orientationDefinitionBuilder() - Method in interface nxopen.features.shipdesign.StiffenerBuilder
-
Returns the builder used to define the orientation for the stiffener.
- orientationDefinitionBuilder() - Method in interface nxopen.features.shipdesign.StiffenerSystemBuilder
-
Returns the builder used to define the orientation for the stiffener system.
- OrientationDefinitionBuilder.MeasureAngleTypes - Class in nxopen.features.shipdesign
-
Settings to indicate how angles are measured in all orientation objects.
- OrientationDefinitionBuilder.PlacementSideTypes - Class in nxopen.features.shipdesign
-
Settings to indicate which side of the placement faces the stiffener is to be placed.
- orientationDirection() - Method in interface nxopen.cae.BeamElementInfo
-
Returns the orientation direction.
- orientationGuide() - Method in interface nxopen.features.SectionSurfaceBuilder
-
- orientationLine() - Method in interface nxopen.features.shipdesign.PillarBuilder
-
- orientationLine() - Method in interface nxopen.features.shipdesign.PillarSystemBuilder
-
Returns the orientation line, used only if the creation method is "Specify Line".
- orientationLinePillar() - Method in interface nxopen.features.shipdesign.EditStockBuilder
-
Returns the line specified for the pillar system angle reference.
- orientationLinePillar() - Method in interface nxopen.features.shipdesign.SubSystemBuilder
-
Returns the line specified for the pillar system angle reference.
- orientationMethod() - Method in interface nxopen.features.shipdesign.EdgeReinforcementBuilder
-
Returns the method used to orient the edge reinforcement.
- orientationMethod() - Method in interface nxopen.features.shipdesign.EditStockBuilder
-
- orientationMethod() - Method in interface nxopen.features.shipdesign.OrientationRegionItemBuilder
-
Returns the orientation method used to define the direction of the web for this region.
- orientationMethod() - Method in interface nxopen.features.shipdesign.StiffenerSystemBuilder
-
Returns the method used to define the reference for the orientation angle of stiffener system.
- orientationMethod() - Method in interface nxopen.features.shipdesign.SubSystemBuilder
-
Returns the method used to define the reference for the orientation angle of stiffener system.
- orientationMethod() - Method in interface nxopen.features.SweptBuilder
-
Returns the orientation method.
- orientationMethod() - Method in interface nxopen.features.TextBuilder
-
- orientationMethod() - Method in interface nxopen.weld.JointmarkBuilder
-
Returns the orientation method for defining a csys
License requirements: ugweld ("UG WELD")
.
- OrientationMethodBuilder - Interface in nxopen.geometricutilities
-
- OrientationMethodBuilder.OrientationOptions - Class in nxopen.geometricutilities
-
This enum represents the orientation option.
- orientationNode() - Method in interface nxopen.cae.BeamElementInfo
-
Returns the orientation node.
- orientationnode - Variable in class nxopen.cae.ElementAssociatedDataUtils.AskBeamData
-
Orientation node.
- orientationObject() - Method in interface nxopen.features.DatumAxisBuilder
-
Returns the orientation object.
- orientationOption() - Method in interface nxopen.features.HelixBuilder
-
Returns the orientation option
License requirements: None.
- orientationOption() - Method in interface nxopen.features.LinearDimensionBuilder
-
Returns the option that controls whether the OrientXpress or whether the vector block
Controls the orientation of the Linear Dimension
License requirements: None.
- orientationOption() - Method in interface nxopen.geometricutilities.OrientationMethodBuilder
-
Returns the orientation option.
- orientationOption() - Method in interface nxopen.geometricutilities.PatternOrientation
-
- orientationPlane() - Method in interface nxopen.die.ClampingSlotBuilder
-
Returns the top orientation plane of the clamping slot pad
License requirements: None.
- orientationPlane() - Method in interface nxopen.die.PadChildBuilder
-
Returns the orientation plane of the die pad.
- orientationPlaneType() - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
Returns the orientation plane indicator enum
License requirements: None.
- orientationPoint() - Method in interface nxopen.geometricutilities.OrientationMethodBuilder
-
Returns the orientation point.
- orientationPoint - Variable in class nxopen.uf.UFDrf.UdSymbolFontInfo
-
- OrientationPointMethodsBuilder - Interface in nxopen.features.shipdesign
-
This class is used to define the boundary of the regions when definining the orientation of a profile.
- OrientationPointMethodsBuilder.MeasureAlongTypes - Class in nxopen.features.shipdesign
-
Settings to indicate how the distance is measured.
- OrientationPointMethodsBuilder.PointMethodTypes - Class in nxopen.features.shipdesign
-
Settings to indicate how the boundary is defined.
- orientationReferenceCSYS() - Method in interface nxopen.tooling.GeneralInsertBuilder
-
Returns the reference CSYS orientation
License requirements: None.
- OrientationRegionItemBuilder - Interface in nxopen.features.shipdesign
-
This class defines each region of the orientation.
- OrientationRegionItemBuilder.OrientationMethodTypes - Class in nxopen.features.shipdesign
-
Settings to indicate how the web orientation is defined for this region.
- OrientationRegionItemBuilderList - Interface in nxopen.features.shipdesign
-
Represents a list of objects.
- orientationState() - Method in interface nxopen.cae.BeamEADBuilder
-
Returns the state drives the commit action
License requirements: nx_masterfem ("Finite Element Modeling")
.
- orientationState() - Method in interface nxopen.cae.BushingEADBuilder
-
Returns the state drives the commit action
License requirements: nx_masterfem ("Finite Element Modeling")
.
- orientationState() - Method in interface nxopen.cae.GapEADBuilder
-
Returns the state drives the commit action
License requirements: nx_masterfem ("Finite Element Modeling")
.
- orientationStatus() - Method in interface nxopen.cam.Cycle
-
Returns the orientation status
License requirements: None.
- orientationTag - Variable in class nxopen.uf.UFMotion.JointCoupler
-
- orientationTag - Variable in class nxopen.uf.UFMotion.Marker
-
- orientationtype - Variable in class nxopen.cae.modelcheck.ElementMaterialOrientationCheckBuilder.DoCheckData
-
- orientationType() - Method in interface nxopen.cae.SimLoadRecipeMapping
-
- orientationType() - Method in interface nxopen.cam.GeometryGroup
-
Returns the derived blank orientation type
License requirements: None.
- orientationType() - Method in interface nxopen.cam.LaserHeadOrientation
-
Returns the Head Orientation Type
License requirements: None.
- orientationType() - Method in interface nxopen.drawings.View2dOrientBuilder
-
Returns the orientation type
License requirements: None.
- orientationType() - Method in interface nxopen.drawings.ViewOrientationBuilder
-
Returns the orientation type
License requirements: None.
- orientationType() - Method in interface nxopen.motion.BushingDefine
-
Returns the orientation type of bushing
License requirements: mechanisms ("MECHANISMS")
.
- orientationVector() - Method in interface nxopen.cae.BeamElementInfo
-
Returns the orientation vector of the beam element.
- orientationVector() - Method in interface nxopen.features.NSidedSurfaceBuilder
-
Returns the orientation vector.
- orientationVector() - Method in interface nxopen.features.shipdesign.EdgeReinforcementBuilder
-
- orientationVector() - Method in interface nxopen.features.shipdesign.EditStockBuilder
-
- orientationVector() - Method in interface nxopen.features.shipdesign.ProfileBuilder
-
Returns the orientation vector
License requirements: None.
- orientationVector() - Method in interface nxopen.features.shipdesign.StiffenerSystemBuilder
-
Returns the vector specified for the orientation angle reference.
- orientationVector() - Method in interface nxopen.features.shipdesign.SubSystemBuilder
-
Returns the vector specified for the orientation angle reference.
- orientationVector() - Method in interface nxopen.features.TextBuilder
-
Returns the orientation vector
License requirements: None.
- orientationVector() - Method in interface nxopen.geometricutilities.OrientationMethodBuilder
-
Returns the orientation vector.
- OrientationViewStyle - Interface in nxopen.drawings
-
Represents set of Orientation View Style Preferences applicable to drafting views.
- OrientBranchBuilder - Interface in nxopen.formboard
-
Builder for "Orient Branch" operation used in formboard.
- OrientBranchBuilder.BranchAngleMethod - Class in nxopen.formboard
-
Enum to define the type of method to orient branch.
- orientCsys() - Method in interface nxopen.features.shipdesign.StiffenerBuilder
-
Returns the orientation coordinate systems (when OrientType is DatumCSys
License requirements: None.
- oriented() - Method in interface nxopen.drawings.SectionLineBuilder
-
- ORIENTED - Static variable in class nxopen.drawings.SectionLineBuilder.Types
-
Deprecated.
- orientedElement() - Method in interface nxopen.cae.BeamSectionOrientationOptions
-
Returns the element to be oriented.
- OrientedSectionLine - Interface in nxopen.drawings
-
Represents a Oriented Section Line.
- OrientedSectionLineBuilder - Interface in nxopen.drawings
-
- orientEnum() - Method in interface nxopen.display.StudioImageCaptureBuilder
-
Returns the orient enum
License requirements: None.
- orientExpress() - Method in interface nxopen.features.StudioSplineBuilderEx
-
Returns the orient express object
License requirements: None.
- orientExpress() - Method in interface nxopen.geometricutilities.CurveShapingBuilder
-
Returns the orient express object
License requirements: None.
- orientExpress() - Method in interface nxopen.mechanicalrouting.TransformBlockBuilder
-
Returns the orient express setting.
- OrientGeomBuilder - Interface in nxopen.cam
-
Represents a OrientGeom Builder
This is an abstract class, and cannot be instantiated.
- OrientGeomBuilder.CsysPurposeModes - Class in nxopen.cam
-
The CSYS purpose mode options .
- OrientGeomBuilder.SpecialOutputModes - Class in nxopen.cam
-
The special output mode options .
- OrientGeomBuilder.ToolAxisModes - Class in nxopen.cam
-
the tool axis mode options
- OrientGeometry - Interface in nxopen.cam
-
Represents a Orient Group
To create or edit an instance of this class, use
OrientGeomBuilder
Created in NX7.5.0
- orientingFace() - Method in interface nxopen.SketchAlongPathBuilder
-
- orientMethod - Variable in class nxopen.uf.UFModl.SmslotData
-
- orientPitch() - Method in interface nxopen.tooling.DirectUnfoldBuilder
-
Returns the orientation of pitch.
- orientPitch() - Method in interface nxopen.tooling.IntermediateStageBuilder
-
Returns the orientation of pitch.
- orientPoint - Variable in class nxopen.uf.UFDrf.SymbolData
-
- orientSectionToDraw() - Method in interface nxopen.die.DrawBeadBuilder
-
Returns the method used to orient the section dimensions.
- orientToWCS() - Method in interface nxopen.assemblies.AddComponentBuilder
-
Orient added components to the WCS
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- orientType() - Method in interface nxopen.features.shipdesign.ProfileBuilder
-
Returns the orient type
License requirements: None.
- orientType() - Method in interface nxopen.features.shipdesign.StiffenerBuilder
-
Returns the stiffener orientation type
License requirements: None.
- orientVector() - Method in interface nxopen.features.shipdesign.StiffenerBuilder
-
Returns the orientation vector (when OrientType is Vector)
License requirements: None.
- orientView(Matrix3x3) - Method in interface nxopen.drawings.OrientationViewStyle
-
Orients the view.
- orientViewToImage() - Method in interface nxopen.display.ImageBaseBuilder
-
Orients and fits the work view's view direction along the reverse normal direction of the image
License requirements: None.
- orientViewTool() - Method in interface nxopen.drawings.ViewCreationWizardBuilder
-
Returns the orient view tool
License requirements: None.
- OrientXpress - Interface in nxopen.blockstyler
-
Represents OrientXpress Block .
- orientXpress() - Method in interface nxopen.geometricutilities.ModlDistanceAngle
-
Returns the orientXpress.
- orientXpress() - Method in interface nxopen.geometricutilities.ModlMotion
-
Returns the orientXpress.
- OrientXpressBuilder - Interface in nxopen.geometricutilities
-
Represent the OrientXpress block
OrientXpress is not supported in KF.
- OrientXpressBuilder.Axis - Class in nxopen.geometricutilities
-
the active axis option
- OrientXpressBuilder.Plane - Class in nxopen.geometricutilities
-
the active plane option
- OrientXpressBuilder.Reference - Class in nxopen.geometricutilities
-
the option for reference csys
- ORIG - Static variable in class nxopen.tooling.InitProjectBuilder.ConfigurationId
-
Original configuration
- origin - Variable in class nxopen.annotations.AnnotationPlacement.OriginData
-
The origin stored on the annotation
- origin() - Method in interface nxopen.annotations.ArrowComponent
-
Returns the arrow origin in absolute coordinates.
- origin() - Method in interface nxopen.annotations.BaseAngularDimensionBuilder
-
Returns the origin
License requirements: None.
- origin() - Method in interface nxopen.annotations.BaseChamferDimensionBuilder
-
Returns the origin
License requirements: None.
- origin() - Method in interface nxopen.annotations.BaseCurveLengthDimensionBuilder
-
Returns the origin
License requirements: None.
- origin() - Method in interface nxopen.annotations.BaseCustomSymbolBuilder
-
Returns the origin
License requirements: None.
- origin() - Method in interface nxopen.annotations.BaseFrameBarBuilder
-
Returns the origin
License requirements: None.
- origin() - Method in interface nxopen.annotations.BaseLinearDimensionBuilder
-
Returns the origin
License requirements: None.
- origin() - Method in interface nxopen.annotations.BaseOrdinateDimensionBuilder
-
Returns the origin
License requirements: None.
- origin() - Method in interface nxopen.annotations.BaseRadialDimensionBuilder
-
Returns the origin
License requirements: None.
- origin() - Method in interface nxopen.annotations.BaseRapidDimensionBuilder
-
Returns the origin
License requirements: None.
- origin() - Method in interface nxopen.annotations.BaseThicknessDimensionBuilder
-
Returns the origin
License requirements: None.
- origin() - Method in interface nxopen.annotations.CustomSymbolLeaderBuilder
-
Returns the
OriginBuilder
for the annotation
License requirements: None.
- origin() - Method in interface nxopen.annotations.DatumFeatureSymbolBuilder
-
Returns the datum feature symbol origin
License requirements: None.
- origin() - Method in interface nxopen.annotations.DatumTargetBuilder
-
Returns the origin
License requirements: None.
- origin() - Method in interface nxopen.annotations.DefineTitleBlockBuilder
-
Returns the origin of the title block.
- origin() - Method in interface nxopen.annotations.DraftingNoteBuilder
-
Returns the origin
License requirements: None.
- origin() - Method in interface nxopen.annotations.EditLeaderBuilder
-
Returns the
OriginBuilder
for the annotation
License requirements: None.
- origin() - Method in interface nxopen.annotations.FeatureControlFrameBuilder
-
Returns the
OriginBuilder
for the annotation
License requirements: None.
- origin() - Method in interface nxopen.annotations.GeodesicDimensionBuilder
-
Returns the origin
License requirements: None.
- origin() - Method in interface nxopen.annotations.HoleTableBuilder
-
Returns the hole table origin
License requirements: None.
- origin() - Method in interface nxopen.annotations.IdSymbolBuilder
-
Returns the origin, where the symbol is going to be displayed
License requirements: None.
- ORIGIN - Static variable in class nxopen.annotations.LeaderData.ArrowheadType
-
Origin symbol
- origin() - Method in interface nxopen.annotations.LineWeldBuilder
-
Returns the
OriginBuilder
for the weld symbol
License requirements: None.
- origin() - Method in interface nxopen.annotations.OriginBuilder
-
Returns the origin
License requirements: None.
- origin() - Method in interface nxopen.annotations.PmiAttributeBuilder
-
Returns the
OriginBuilder
for the annotation
License requirements: None.
- origin() - Method in interface nxopen.annotations.RegionBuilder
-
- origin() - Method in interface nxopen.annotations.ShipDimensionBuilder
-
Returns the origin
License requirements: None.
- origin() - Method in interface nxopen.annotations.TableSectionBuilder
-
Returns the origin, where the symbol is going to be displayed
License requirements: None.
- origin() - Method in interface nxopen.annotations.TextComponent
-
Returns the text origin in absolute coordinates.
- origin() - Method in interface nxopen.Axis
-
Returns the origin
License requirements: None.
- origin() - Method in interface nxopen.blockstyler.ReverseDirection
-
Returns the Origin.
- origin() - Method in interface nxopen.blockstyler.SpecifyOrientation
-
Returns the Origin
License requirements: None.
- origin - Variable in class nxopen.cae.Result.ResultCoordinateSystemDefinitionData
-
- ORIGIN - Static variable in class nxopen.cam.InspectionAlignmentBuilder.RotateTablePcsUpdateOptions
-
Only update the PCS origin
- origin() - Method in interface nxopen.CoordinateSystem
-
Returns the origin of the coordinate system
License requirements: None.
- origin() - Method in interface nxopen.DatumAxis
-
Returns the origin of the datum axis
License requirements: solid_modeling ("SOLIDS MODELING")
.
- origin() - Method in interface nxopen.DatumPlane
-
Returns the origin of the datum plane
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- origin() - Method in interface nxopen.diagramming.SheetBordersAndZonesBuilder
-
Returns the type of zone origin like TopLeft/BottomRight.
- origin() - Method in interface nxopen.diagramming.SheetZoneSettingsBuilder
-
Returns the type of zone origin like TopLeft/BottomRight.
- origin() - Method in interface nxopen.die.LineupBuilder
-
Returns the origin of the lineup
License requirements: die_engineering ("DIE ENGINEERING")
.
- origin() - Method in interface nxopen.die.QuickBinderWrapBuilder
-
Returns the origin
License requirements: None.
- origin() - Method in interface nxopen.Direction
-
Returns the origin of the direction.
- origin() - Method in interface nxopen.display.DecalBuilder
-
Returns the origin
License requirements: None.
- origin - Variable in class nxopen.display.DynamicSectionBuilder.PlaneGeometryData
-
Plane origin
- origin() - Method in interface nxopen.drawings.BordersAndZonesBuilder
-
- origin() - Method in interface nxopen.drawings.DetailViewBuilder
-
Returns the origin
License requirements: None.
- origin() - Method in interface nxopen.drawings.DrawingRegionBuilder
-
Returns the origin
License requirements: None.
- origin() - Method in interface nxopen.drawings.SheetZoneSettingsBuilder
-
Returns the origin
License requirements: None.
- origin() - Method in interface nxopen.features.BlockFeatureBuilder
-
Returns the point coordinates representing the block origin.
- origin() - Method in interface nxopen.features.CylinderBuilder
-
Returns the cylinder origin
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- origin() - Method in interface nxopen.features.LatticeBuilder
-
Returns the origin where the unit cell patterning starts in the lattice creation
License requirements: None.
- origin() - Method in interface nxopen.features.RasterImage
-
Returns the origin of the raster image
License requirements: None.
- origin() - Method in interface nxopen.features.sheetmetal.ClosedCornerBuilder
-
Returns the default origin will be at the corner point instead of the intersection of bend centerlines.
- origin - Variable in class nxopen.features.sheetmetal.GussetBuilder.PlacementOriginAndDirectionData
-
Start point from which placement distance is measured.
- origin() - Method in interface nxopen.features.subdivision.SubdivisionPrimitiveShapeBuilder
-
- origin() - Method in interface nxopen.features.subdivision.SubdivisionPrimitiveShapeBuilderEx
-
Returns the origin.
- origin() - Method in interface nxopen.fields.SpatialMapBuilder
-
Returns the origin
License requirements: None.
- origin() - Method in interface nxopen.formboard.PathLengthAnnotationBuilder
-
Returns the origin
License requirements: routing_harness ("Routing Harness")
.
- origin() - Method in interface nxopen.geometricanalysis.sectionanalysis.SectionPlaneBuilder
-
Returns the plane origin
License requirements: None.
- origin() - Method in interface nxopen.geometricutilities.AnchorLocatorBuilder
-
Returns the origin of the plane
License requirements: None.
- ORIGIN - Static variable in class nxopen.geometricutilities.TransformerData.ObjectType
-
- ORIGIN - Static variable in class nxopen.InferSnapType.SnapType
-
Snap origin
- origin() - Method in interface nxopen.IPlane
-
Returns the origin of the plane
License requirements: None.
- origin - Variable in class nxopen.layout2d.CreateComponentFrom3DBuilder.ProjectionPlaneData
-
- origin - Variable in class nxopen.linedesigner.JigOnPlaneBuilder.JigPlaneParamsData
-
- origin() - Method in interface nxopen.motion.LinkAttachmentData
-
Returns the origin
License requirements: None.
- origin() - Method in interface nxopen.motion.VObject
-
Returns the origin
License requirements: None.
- origin - Variable in class nxopen.routing.electrical.CablewaysLayoutView.ViewMatrixAndOriginData
-
- origin() - Method in interface nxopen.Sketch
-
Returns the location of the origin of the local coordinate system for the sketch
License requirements: None.
- origin() - Method in interface nxopen.tooling.DieEngDieTipBuilder
-
Returns the origin point
License requirements: die_engineering ("DIE ENGINEERING")
.
- origin - Variable in class nxopen.uf.UFAssem.AskComponentData
-
- origin - Variable in class nxopen.uf.UFAssem.AskOrientationData
-
- origin - Variable in class nxopen.uf.UFAssem.AskRefSetData
-
- origin - Variable in class nxopen.uf.UFCam.AskClearPlaneData
-
- origin - Variable in class nxopen.uf.UFCam.AskLowerLimitPlaneData
-
- origin - Variable in class nxopen.uf.UFCambnd.BoundaryData
-
- origin - Variable in class nxopen.uf.UFDisp.TextureSpaceInfo
-
- origin - Variable in class nxopen.uf.UFDrf.AskArrowData
-
- origin - Variable in class nxopen.uf.UFDrf.AskAssociativeOriginData
-
- origin - Variable in class nxopen.uf.UFDrf.CustomSymbol
-
- origin - Variable in class nxopen.uf.UFDrf.DraftAidTextInfo
-
- origin - Variable in class nxopen.uf.UFDrf.ImageData
-
- origin - Variable in class nxopen.uf.UFDrf.SymbolInstance
-
- origin - Variable in class nxopen.uf.UFFltr.AskPlaneZoneData
-
- origin - Variable in class nxopen.uf.UFModl.DimensionData
-
- origin - Variable in class nxopen.uf.UFModlFeatures.AskDatumAxisParmsData
-
- origin - Variable in class nxopen.uf.UFModlFeatures.AskDatumCsysComponentsData
-
- origin - Variable in class nxopen.uf.UFModlFeatures.AskDatumPlaneParmsData
-
- origin - Variable in class nxopen.uf.UFMotion.VectorForceTorque
-
- origin - Variable in class nxopen.uf.UFRoute.AskPlacesTransformData
-
- origin - Variable in class nxopen.uf.UFSf.OrientationData
-
- origin - Variable in class nxopen.uf.UFUi.PickCsysData
-
- origin - Variable in class nxopen.uf.UFUi.SpecifyCsysData
-
- origin - Variable in class nxopen.uf.UFUi.SpecifyVectorData
-
- origin() - Method in interface nxopen.View
-
Returns the view origin.
- origin() - Method in interface nxopen.WCS
-
Returns the origin of the WCS
License requirements: None.
- origin() - Method in interface nxopen.weld.WeldLabelBuilder
-
Returns the
OriginBuilder
for the annotation
License requirements: None.
- origin - Variable in class nxopen.weld.WeldPointBuilder.CsysData
-
origin point
- origin() - Method in interface nxopen.Xform
-
Returns the coordinates of the origin
License requirements: None.
- origin1 - Variable in class nxopen.uf.UFMotion.CylindricalBushing
-
- origin1 - Variable in class nxopen.uf.UFMotion.GeneralBushing
-
- origin1 - Variable in class nxopen.uf.UFMotion.Joint
-
- origin1 - Variable in class nxopen.uf.UFMotion.ScalarForceTorque
-
- origin2 - Variable in class nxopen.uf.UFMotion.CylindricalBushing
-
- origin2 - Variable in class nxopen.uf.UFMotion.GeneralBushing
-
- origin2 - Variable in class nxopen.uf.UFMotion.Joint
-
- origin2 - Variable in class nxopen.uf.UFMotion.ScalarForceTorque
-
- ORIGIN_ALIGNED_WITH_ARROWS - Static variable in class nxopen.uf.UFDrf.AssociativeOriginType
-
- ORIGIN_AND_EDGE_LENGTHS - Static variable in class nxopen.features.BlockFeatureBuilder.Types
-
Represents the block created by providing Origin and Edge Lengths
- ORIGIN_AT_APOINT - Static variable in class nxopen.uf.UFDrf.AssociativeOriginType
-
- ORIGIN_DRAG - Static variable in class nxopen.uf.UFDrf.AssociativeOriginType
-
- ORIGIN_HORIZONTALLY_ALIGNED - Static variable in class nxopen.uf.UFDrf.AssociativeOriginType
-
- ORIGIN_OF_COMPONENT - Static variable in class nxopen.preferences.SessionAssemblies.DragHandlePositionOption
-
- ORIGIN_OFFSET_FROM_TEXT - Static variable in class nxopen.uf.UFDrf.AssociativeOriginType
-
- ORIGIN_RELATIVE_TO_GEOMETRY - Static variable in class nxopen.uf.UFDrf.AssociativeOriginType
-
- ORIGIN_RELATIVE_TO_VIEW - Static variable in class nxopen.uf.UFDrf.AssociativeOriginType
-
- ORIGIN_STACK - Static variable in class nxopen.uf.UFDrf.AssociativeOriginType
-
- ORIGIN_SYMBOL_ARROW - Static variable in class nxopen.annotations.ArrowheadType
-
- ORIGIN_SYMBOL_ARROW - Static variable in class nxopen.uf.UFDrf.ArrowheadAndFillType
-
- ORIGIN_VERTICALLY_ALIGNED - Static variable in class nxopen.uf.UFDrf.AssociativeOriginType
-
- ORIGINAL - Static variable in class nxopen.annotations.BillOfMaterialBuilder.FabricationNumberingType
-
- ORIGINAL - Static variable in class nxopen.assemblies.CreateNewComponentBuilder.ComponentLayerOptionType
-
Set the layer option type to original
- ORIGINAL - Static variable in class nxopen.assemblies.DesignElementBuilder.LayerOptionType
-
Original layer
- ORIGINAL - Static variable in class nxopen.assemblies.productinterface.ObjectBuilder.BuilderVersion
-
linked feature cannot select the product interface item
- ORIGINAL - Static variable in class nxopen.assemblies.ReplaceComponentBuilder.ComponentLayerOption
-
Set the layer to replacement part's original layer
- ORIGINAL - Static variable in class nxopen.assemblies.ReplaceComponentBuilder.ComponentNameOption
-
Use the replacement part name as the component name
- ORIGINAL - Static variable in class nxopen.cae.optimization.TBSSmoothBuilder.IsoType
-
Saves the original surface
- ORIGINAL - Static variable in class nxopen.cam.NcmctPartMountingBuilder.LayerTypes
-
Original
- ORIGINAL - Static variable in class nxopen.display.LayerSettingsBuilder.LayerOptionType
-
Original layer
- ORIGINAL - Static variable in class nxopen.drawings.CustomViewSettingsBuilder.Width
-
Original
- ORIGINAL - Static variable in class nxopen.features.CopyPasteBuilder.BuilderVersion
-
Value of original version; It can be set before NX8.0.
- ORIGINAL - Static variable in class nxopen.features.IFormBuilder.BSurfaceExtractionOptions
-
Extract original surface
- ORIGINAL - Static variable in class nxopen.features.MoveObjectBuilder.LayerOptionType
-
Original Layer
- ORIGINAL - Static variable in class nxopen.features.shipdesign.ExcessMaterialBuilder.VersionID
-
This feature builder is used to edit an existing NX75 - NX901 excess material feature.
- ORIGINAL - Static variable in class nxopen.features.StudioXformBuilderEx.ExtrationMethodType
-
Extract original surface
- ORIGINAL - Static variable in class nxopen.issue.IssueManager.State
-
Original state
- ORIGINAL - Static variable in class nxopen.LineFontBuilder.LineFontType
-
Original line font
- ORIGINAL - Static variable in class nxopen.motion.AddSubmechanismBuilder.Layer
-
the original layer
- ORIGINAL - Static variable in class nxopen.PartImporter.LayerOptionType
-
Import part on original layers.
- ORIGINAL - Static variable in class nxopen.PasteSpecialBuilder.LayerOption
-
- ORIGINAL - Static variable in class nxopen.preferences.Font
-
Original
- ORIGINAL - Static variable in class nxopen.preferences.PartDrafting.FontType
-
Original
- ORIGINAL - Static variable in class nxopen.preferences.PartDrafting.WidthType
-
Original
- ORIGINAL - Static variable in class nxopen.preferences.RoutingPart.FabricationNumbering
-
Use the fabrication number in the parts list.
- ORIGINAL - Static variable in class nxopen.preferences.ViewVisualizationVisual.SmoothEdgeFont
-
- ORIGINAL - Static variable in class nxopen.preferences.ViewVisualizationVisual.SmoothEdgeWidth
-
- ORIGINAL - Static variable in class nxopen.preferences.Width
-
Original
- ORIGINAL - Static variable in class nxopen.SketchProjectBuilder.OutputCurve
-
original curve output
- ORIGINAL - Static variable in class nxopen.tooling.AddReusableFeatureBuilder.LayerOptionType
-
Original Layer
- ORIGINAL - Static variable in class nxopen.tooling.ElectrodeInitializationBuilder.Method
-
- ORIGINAL - Static variable in class nxopen.uf.UFDisp.BackgroundColor
-
- ORIGINAL - Static variable in class nxopen.userdefinedtemplate.InstantiationBuilder.JaUserdefinedtemplateLayerOption
-
Outputs will be in the same layer as in authoring part
- ORIGINAL - Static variable in class nxopen.ViewDependentDisplayManager.PartialShading
-
- ORIGINAL - Static variable in class nxopen.ViewDependentDisplayManager.Translucency
-
- ORIGINAL_COLOR - Static variable in class nxopen.visualreporting.GroupLabel.DisplayStyleOption
-
Matching objects will be shown using their original color
- ORIGINAL_COLOR_SHELL - Static variable in class nxopen.preferences.PartVisualizationEmphasis.SeeThruStyleType
-
Displays de-emphasized shaded geometry as a translucent
shell, preserving original colors.
- ORIGINAL_INSTANCE - Static variable in class nxopen.features.CopyPasteBuilder.ExpressionTransferOption
-
Instance of Original
- ORIGINAL_INSTANCE - Static variable in class nxopen.features.CopyPasteBuilder.ParentTransferOption
-
Instance of Original
- ORIGINAL_INSTANCE - Static variable in class nxopen.features.PatternFeatureBuilder.ExpressionTransferOptions
-
Instance of Original
- ORIGINAL_LAYER - Static variable in class nxopen.assemblies.AssembliesGeneralPropertiesBuilder.LayerOptions
-
Objects will be placed on original layer
- ORIGINAL_MAKE_VISIBLE - Static variable in class nxopen.cam.NcmctPartMountingBuilder.LayerTypes
-
Original - Make Visible
- ORIGINAL_PRODUCT - Static variable in class nxopen.tooldesigner.SelectDatumsBuilder.SearchOption
-
- ORIGINAL_PRODUCT - Static variable in class nxopen.tooling.DieEngStampingOutputBuilder.DisplayProductType
-
- originalBodyOption() - Method in interface nxopen.facet.CleanupFacetBodyBuilder
-
Returns the option for handling the input facet bodies
License requirements: None.
- originalBodyOption() - Method in interface nxopen.facet.ConvertFacetBodyBuilder
-
Returns the option for handling the input facet bodies
License requirements: None.
- originalBodyOption() - Method in interface nxopen.facet.FacetBodyFromBodyBuilder
-
Returns the original body option of enum
License requirements: None.
- OriginalColorShellOptions() - Constructor for class nxopen.preferences.PartVisualizationEmphasis.OriginalColorShellOptions
-
- OriginalColorShellOptions(PartVisualizationEmphasis.EdgesType, NXColor.Rgb, int) - Constructor for class nxopen.preferences.PartVisualizationEmphasis.OriginalColorShellOptions
-
Constructor for the OriginalColorShellOptions object.
- originalDesignBody() - Method in interface nxopen.features.shipdesign.DvToMvMappingBuilder
-
Returns the original design body.
- originalEntity - Variable in class nxopen.uf.UFModl.ReplaceFeatures
-
- originalFeature() - Method in interface nxopen.features.UserDefinedFeatureCopyEvent
-
Returns the original feature being copied
License requirements: None.
- originalFeature() - Method in interface nxopen.features.UserDefinedFeatureCreateEvent
-
Returns the original feature being copied
License requirements: None.
- originalFeatures() - Method in interface nxopen.features.shipdesign.MirrorShipStructureBuilder
-
Returns the list of features to Mirror Copy.
- OriginalImageDimensionData() - Constructor for class nxopen.report.ReportManager.OriginalImageDimensionData
-
- originalInstantiation() - Method in interface nxopen.features.UserDefinedFeatureCopyEvent
-
Returns the UDF definition
License requirements: None.
- originalMfgBody() - Method in interface nxopen.features.shipdesign.DvToMvMappingBuilder
-
Returns the original manufacturing body.
- originalNodeLocationColor() - Method in interface nxopen.cae.ProjectNodesToCadGeometryBuilder
-
Returns the display color of proximity nodes' original location.
- originalObjectsDeleted() - Method in interface nxopen.assemblies.CreateNewComponentBuilder
-
Returns the original objects deleted
License requirements: None.
- originalParts() - Method in interface nxopen.features.shipdesign.MirrorShipStructureBuilder
-
Returns the list of parts (or components) to Mirror Copy.
- originalResultOption() - Method in interface nxopen.cae.CyclicSymmetricParameters
-
Returns the original result option enum
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- originals() - Method in interface nxopen.drafting.CutCopyPasteBuilder
-
Returns the operation type.
- originalsplinelengths - Variable in class nxopen.routing.RouteManager.ConvertSplineSegmentsData
-
The length of each spline segment before converting.
- originalSurfaceSmooth() - Method in interface nxopen.cae.optimization.TBSSmoothBuilder
-
Returns the option of how to smooth the original surface
License requirements: None.
- originalTarget - Variable in class nxopen.uf.UFModeling.AskBooleanWithRetainedOptionsData
-
- originalTool - Variable in class nxopen.uf.UFModeling.AskBooleanWithRetainedOptionsData
-
- originalValue - Variable in class nxopen.uf.UFMfm.AskDoubleValueOfAttributeData
-
- originalValue - Variable in class nxopen.uf.UFMfm.AskIntegerValueOfAttributeData
-
- originalValue - Variable in class nxopen.uf.UFMfm.AskLogicalValueOfAttributeData
-
- originalValue - Variable in class nxopen.uf.UFMfm.AskStringValueOfAttributeData
-
- originAnchorOrigin() - Method in interface nxopen.die.QuickBinderBuilder
-
Returns the anchor origin of binder sheet body.
- OriginBuilder - Interface in nxopen.annotations
-
Represents a
OriginBuilder
This is a sub-builder class and cannot be directly instantiated
Created in NX6.0.0
- OriginBuilder.AlignmentPosition - Class in nxopen.annotations
-
alignment position on the annotation
- originCurve() - Method in interface nxopen.annotations.GeodesicDimensionBuilder
-
Returns the curves or edges to dimension from
License requirements: None.
- OriginData() - Constructor for class nxopen.annotations.AnnotationPlacement.OriginData
-
- originData - Variable in class nxopen.annotations.AnnotationPlacement.OriginData
-
The origin data
- originData - Variable in class nxopen.uf.UFDrf.AskAssociativeOriginData
-
- originDisp - Variable in class nxopen.uf.UFDrf.AskOrdoriginInfoData
-
- originDisplay() - Method in interface nxopen.annotations.OrdinateDimensionPreferences
-
Returns the origin display option
License requirements: None.
- originDisplay - Variable in class nxopen.uf.UFPatt.AskParamsData
-
- OriginMethod - Class in nxopen
-
Specifies origin method
- originName - Variable in class nxopen.uf.UFDrf.OrddispInfo
-
- originObject() - Method in interface nxopen.features.AngularDimBuilder
-
Returns the origin object is for the fixed object
License requirements: None.
- originObject() - Method in interface nxopen.features.LinearDimensionBuilder
-
Returns the origin object from which the ADM Linear dimension is measured from
License requirements: None.
- originOption() - Method in interface nxopen.preferences.SessionSketch
-
- originOption() - Method in interface nxopen.SketchInPlaceBuilder
-
Returns the origin method for sketch
License requirements: None.
- originOptionInfer() - Method in interface nxopen.SketchInPlaceBuilder
-
Returns the origin method for sketch
License requirements: None.
- originPath() - Method in interface nxopen.layout2d.PublishComponentBuilder
-
Returns the path of folder or definition to publish
License requirements: None.
- originPoint() - Method in interface nxopen.annotations.OriginBuilder
-
Returns the origin point
License requirements: None.
- originPoint() - Method in interface nxopen.features.BlockFeatureBuilder
-
Returns the block origin point
License requirements: None.
- originPoint() - Method in interface nxopen.features.vehicledesign.VehicleCoordinateSystemBuilder
-
Returns the origin point.
- originPoint() - Method in interface nxopen.motion.MarkerBuilder
-
Returns the origin point
License requirements: None.
- originPoint() - Method in interface nxopen.tooling.AutoDimensionBuilder
-
Returns the ordinate origin point
License requirements: None.
- originPoint - Variable in class nxopen.uf.UFModeling.AskPlaneData
-
- originPosition() - Method in interface nxopen.display.DecalBuilder
-
Returns the origin_pos
License requirements: None.
- originTag - Variable in class nxopen.uf.UFMotion.JointCoupler
-
- originTag - Variable in class nxopen.uf.UFMotion.Marker
-
- originType - Variable in class nxopen.annotations.Annotation.AssociativeOriginData
-
Type of associativity
- originType() - Method in interface nxopen.features.sheetmetal.ThreeBendCornerBuilder
-
Returns the relief origin used for circular, u and v cutout corner treatments.
- originType - Variable in class nxopen.uf.UFDrf.AssociativeOrigin
-
- origObject - Variable in class nxopen.Sketch.CopyObjectData
-
- oriMethod() - Method in interface nxopen.cae.BeamEADBuilder
-
Returns the method to get the element orientation method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- oriMethod() - Method in interface nxopen.cae.BushingEADBuilder
-
Returns the method to get the element orientation method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- orimethod - Variable in class nxopen.cae.ElementAssociatedDataUtils.AskBeamData
-
Orientation method.
- orimethod - Variable in class nxopen.cae.ElementAssociatedDataUtils.AskBushingData
-
Orientation method.
- orimethod - Variable in class nxopen.cae.ElementAssociatedDataUtils.AskGapData
-
Orientation method.
- oriMethod() - Method in interface nxopen.cae.GapEADBuilder
-
Returns the method to get the element orientation method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- oringRadialBoreDia(double, double, double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the bore diameter from section diameter, inner diameter, compression and stretch.
- oringRadialGrooveDia(double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the groove diameter from o-ring inner diameter and stretch ratio.
- oringRadialGrooveDiaBore(double, double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the groove diameter from bore diameter, section diameter and compression ratio.
- oringRadialGrooveWidth(double) - Method in interface nxopen.EngineeringFunction
-
Calculate the suggested groove width from the cross-section diameter.
- oringRadialInnerDia(double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the recommended o-ring inner diameter from groove diameter.
- oringRadialSectionMaximum(double, double, double, double, double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the max. cross-section diameter from the bore and the groove diameter.
- oringRadialSectionMinimum(double, double, double, double, double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the min. cross-section diameter from the bore and the groove diameter.
- oringRadialStretch(double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the stretch ratio from inner diameter of o-ring and groove diameter
License requirements: None.
- oriNode() - Method in interface nxopen.cae.BushingEADBuilder
-
Returns the get ori_node operator selects an orientation node
License requirements: nx_masterfem ("Finite Element Modeling")
.
- orinode - Variable in class nxopen.cae.ElementAssociatedDataUtils.AskBushingData
-
Orientation node.
- orinode - Variable in class nxopen.cae.ElementAssociatedDataUtils.AskGapData
-
Orientation node.
- oriNode() - Method in interface nxopen.cae.GapEADBuilder
-
Returns the get ori_node operator selects an orientation node
License requirements: nx_masterfem ("Finite Element Modeling")
.
- ORPHAN_ELEMS - Static variable in class nxopen.cae.Laminate.ZoneType
-
Zone with elements that were not assigned to any zone
- orphanNodeMovementOption() - Method in interface nxopen.cae.AutomaticMorphBuilder
-
Returns the option which indicates whether nodes in topologically modified region will be stationary, or move by adjacent nodes movement.
- ORTHOGONAL - Static variable in class nxopen.die.DrawBeadBuilder.OrientationTypes
-
The width and angle parameters are orthogonal, or normal, to the sheet metal normal at the section location.
- ORTHOGONAL - Static variable in class nxopen.features.ExtendSheetBuilder.SideEdgeShape
-
- ORTHOGONAL - Static variable in class nxopen.features.shipdesign.OrientationDefinitionBuilder.MeasureAngleTypes
-
Angles are measured in an orthogonal plane closest to the normal of the
landing curve.
- ORTHOGONAL - Static variable in class nxopen.features.shipdesign.OrientationRegionItemBuilder.OrientationMethodTypes
-
The web of the profile is aligned along the closest orthogonal direction to the placement surface normal.
- ORTHOGONAL_SUBTYPE - Static variable in class nxopen.uf.UFView.Subtype
-
- ORTHOGRAPHIC - Static variable in class nxopen.drawings.ViewOrientationBuilder.Orientation
-
Orthographic
- orthonormalize(Matrix3x3) - Method in interface nxopen.MathUtils
-
Orthonormalizes a matrix
License requirements: None.
- orthoNormalize(double[]) - Method in interface nxopen.uf.UFMtx3
-
- orthoNormalize(double[]) - Method in interface nxopen.uf.UFMtx4
-
- ORTHOTROPIC - Static variable in class nxopen.PhysicalMaterial.Type
-
Orthotropic
- orthotropicFailureCriterion() - Method in interface nxopen.cae.DurabilityEventStrengthSettingsBuilder
-
Returns the orthotropic failure criterion.
- orthotropicFatigueCriterion() - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder
-
Returns the orthotropic fatigue criterion.
- orthotropicMeanStress() - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder
-
Returns the orthotropic mean stress.
- osCircleRadius - Variable in class nxopen.uf.UFModl.SmreliefData
-
- OSFILENAME - Static variable in class nxopen.pdm.PartOperationImportBuilder.NumberingSourceOption
-
- osName - Variable in class nxopen.uf.UF.SystemInfo
-
- osVersion - Variable in class nxopen.uf.UF.SystemInfo
-
- OT - Static variable in class nxopen.features.shipdesign.SectionViewBuilder.DirectionOptions
-
- OTHER - Static variable in class nxopen.assemblies.CreateNewComponentBuilder.ComponentReferenceSetType
-
Set the reference to other
- OTHER - Static variable in class nxopen.Axis.Types
-
the type is not one of the other enumerated types
- OTHER - Static variable in class nxopen.cae.Result.GroupContainer
-
- OTHER - Static variable in class nxopen.die.PierceItemBuilder.HoleShapeType
-
Not a standard shape
- OTHER - Static variable in class nxopen.features.TextBuilder.ScriptOptions
-
Specifies a default character set based on current system locale
- OTHER - Static variable in class nxopen.PhysicalMaterial.Category
-
Other (Not metal, plastic, etc.)
- OTHER - Static variable in class nxopen.routing.electrical.ConnectorDevice.ComponentType
-
- OTHER - Static variable in class nxopen.tooling.DieDesPierceInsertBuilder.HoleShapeTypes
-
- OTHER - Static variable in class nxopen.tooling.EjectorTableBuilder.EjectorType
-
- OTHER_COMPONENT - Static variable in class nxopen.features.vehicledesign.MirrorCertificationBuilder.EyeFromOptionType
-
Represents eyellipse feature is from the other component Part
- OTHER_FACES - Static variable in class nxopen.tooling.MWDefineRegionsBuilder.TranslucencyOptionType
-
Non-selected region faces
- OTHER_FILE - Static variable in class nxopen.cae.AfuMathOperation.OutputType
-
Saves the new AFU Data Record to other file
- OTHER_PART - Static variable in class nxopen.features.CompositeCurveBuilder.PartType
-
Other part in assembly
- OTHER_PART - Static variable in class nxopen.features.ExtractFaceBuilder.ParentPartType
-
inter part mode
- OTHER_PART - Static variable in class nxopen.features.MirrorBodyBuilder.ParentPart
-
Other Part
- OTHER_PART - Static variable in class nxopen.features.WaveDatumBuilder.ParentPartType
-
inter part mode
- OTHER_PART - Static variable in class nxopen.features.WavePointBuilder.ParentPartType
-
inter part mode
- OTHER_PART - Static variable in class nxopen.features.WaveSketchBuilder.ParentPartType
-
inter part mode
- OTHER_STATE - Static variable in class nxopen.uf.UFModl.State
-
- otherdependents - Variable in class nxopen.geometricutilities.EntityUsageInfo.OtherDependentsData
-
dependent objects
- OtherDependentsData() - Constructor for class nxopen.geometricutilities.EntityUsageInfo.OtherDependentsData
-
- OTHERS - Static variable in class nxopen.assemblies.ReplaceComponentBuilder.ComponentReferenceSet
-
Set the specified reference set
- othershapelargeimagenames - Variable in class nxopen.uf.UFModl.ShapePatternClientDialogData
-
- othershapenames - Variable in class nxopen.uf.UFModl.ShapePatternClientDialogData
-
- othershapethumbnailimagenames - Variable in class nxopen.uf.UFModl.ShapePatternClientDialogData
-
- otherSideSymbol() - Method in interface nxopen.weld.JointExitBuilder
-
Returns the symbol for welding other side when it is not being prepared
License requirements: None.
- otherSideWeldData() - Method in interface nxopen.annotations.LineWeldBuilder
-
Returns the
LineWeldDataBuilder
for the other side of the weld symbol
License requirements: None.
- othersOffset() - Method in interface nxopen.cae.SolverAppendOption
-
Returns the offset for all other entities
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- OUT - Static variable in class nxopen.diagramming.Direction
-
Out direction
- OUT - Static variable in class nxopen.features.shipdesign.StandardPartItemBuilder.Direction
-
out
- OUT_OF_DATE - Static variable in class nxopen.assemblies.PositioningGroup.Status
-
- OUT_OF_DATE - Static variable in class nxopen.cae.optimization.TBSOptimizationSolution.ResultStatus
-
The result is out-of-date
- OUT_OF_DATE - Static variable in class nxopen.cam.BlankIpw.StatusTypes
-
blank ipw status out of date
- OUT_OF_DATE - Static variable in class nxopen.drawings.DraftingViewCollection.ViewUpdateOption
-
Updates all out of date views in scope (part or drawing sheet).
- OUT_OF_DATE - Static variable in class nxopen.features.SketchConversionStatus.ReasonType
-
The linked feature curves have been converted with no constraints, because the selected feature had an out-of-date link
- OUT_OF_DATE - Static variable in class nxopen.mechanicalrouting.LogicalDesignService.MappingStatus
-
- OUT_OF_DATE - Static variable in class nxopen.pdm.ModelElementRevision.PositioningStatus
-
- OUT_OF_DATE - Static variable in class nxopen.positioning.Constraint.SolverStatus
-
Needs evaluation
- OUT_OF_DATE - Static variable in class nxopen.userdefinedobjects.UserDefinedObject.LinkStatus
-
The associated object is out of date.
- OUT_OF_DATE_AUTOMATIC - Static variable in class nxopen.drawings.DraftingViewCollection.ViewUpdateOption
-
Updates all out of date automatic views in scope (part or drawing sheet).
- OUT_OF_DATE_EXTRACT - Static variable in class nxopen.features.SketchConversionStatus.ReasonType
-
The extracted feature curves have been converted with no constraints, because the selected feature had an out-of-date extract
- outboardOffsetValue() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
Returns the expression containing the offset value of the outboard position.
- outelements - Variable in class nxopen.shipdesign.Generator.AskPlatesSpatialRelationsData
-
- OUTER - Static variable in class nxopen.bodydes.OnestepUnformBuilder.Surface
-
Onestep solver will offset outer surface and shrink it
- OUTER - Static variable in class nxopen.cam.CamInspectionOperationInneroutertypes
-
Feature with surface normal pointing outward (pin)
- OUTER - Static variable in class nxopen.die.TrimLineDevelopmentBuilder.Surface
-
Onestep solver will offset outer surface and shrink it
- OUTER_ANGLE - Static variable in class nxopen.MeasureAngleBuilder.OrientationType
-
- OUTER_FACE_EDGES - Static variable in class nxopen.SelectionIntentRule.RuleType
-
- OUTER_MOLD_LINE - Static variable in class nxopen.features.sheetmetal.BendBuilder.BendLocationOptions
-
- OUTER_MOLD_LINE - Static variable in class nxopen.preferences.PartFlexiblePrintedCircuitDesign.FlatPatternObjectType
-
- OUTER_MOLD_LINE - Static variable in class nxopen.preferences.PartSheetmetal.FlatPatternObjectType
-
- OUTER_MOLD_LINE - Static variable in class nxopen.sheetmetal.FlatPatternSettings.FlatPatternObjectType
-
- OUTER_PROFILE - Static variable in class nxopen.cam.InspectionMeasDataBuilder.DisplayTransformTypes
-
Outer Profile
- outerAngle() - Method in interface nxopen.features.vehicledesign.OilPanBuilder
-
- outerBoundary() - Method in interface nxopen.features.FlatteningAndFormingBuilderEx
-
Returns the outer boundary of the source face that could have the longest length
License requirements: None.
- outerCornerTreatment() - Method in interface nxopen.features.sheetmetal.FlatPatternBuilder
-
Returns the outer corner treatment corner object
License requirements: None.
- outerCornerTreatment() - Method in interface nxopen.features.sheetmetal.FlatSolidBuilder
-
Returns the outer corner treatment corner object
License requirements: None.
- outerCurve() - Method in interface nxopen.die.SpringbackCompensationBuilder
-
Returns the outer boundary curve of transition area.
- outerDiameter() - Method in interface nxopen.annotations.DatumTargetBuilder
-
Returns the outer diameter
License requirements: None.
- outerDiameter() - Method in interface nxopen.annotations.RegionBuilder
-
- outerDiameter() - Method in interface nxopen.cam.BoundaryTurnBlank
-
Returns the outer diameter of the tube
License requirements: None.
- outerDiameter() - Method in interface nxopen.features.TubeBuilder
-
Returns the outer diameter
License requirements: None.
- outerDiameter() - Method in interface nxopen.routing.StockDefinition
-
Returns the outer diameter
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- outerDiameterType() - Method in interface nxopen.annotations.SearchCriteriaDatumTargetBuilder
-
Returns the outer diameter enum
License requirements: None.
- outerDiameterValue() - Method in interface nxopen.annotations.SearchCriteriaDatumTargetBuilder
-
Returns the outer diameter value
License requirements: None.
- OuterEdgesOfFacesRule - Interface in nxopen
-
- outerHole() - Method in interface nxopen.facet.FillHoleBuilder
-
Returns the Outer Hole in island filling.
- outerLineCFW() - Method in interface nxopen.diagramming.SheetBorderSettingsBuilder
-
Returns the color, font and width of outer border line.
- outerLineCFW() - Method in interface nxopen.drawings.SheetBorderSettingsBuilder
-
Returns the outer border line's color, font and width
License requirements: None.
- outerLoop() - Method in interface nxopen.features.NSidedSurfaceBuilder
-
Returns the outer loop
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- outerMold() - Method in interface nxopen.features.sheetmetal.ExportFlatPatternBuilder
-
Returns the option to export the outer mold
Use this option only for the DXF type.
- outerOffset() - Method in interface nxopen.features.vehicledesign.OilPanBuilder
-
- outerProfile() - Method in interface nxopen.tooling.GeneralInsertBuilder
-
Returns the outer profile
License requirements: None.
- outerRoughOffset() - Method in interface nxopen.tooling.ShimBuilder
-
Returns the outer rough offset
License requirements: None.
- outerSize() - Method in interface nxopen.features.subdivision.SubdivisionPrimitiveShapeBuilder
-
- outerSize() - Method in interface nxopen.features.subdivision.SubdivisionPrimitiveShapeBuilderEx
-
Returns the outer size of torus.
- outerTolerance() - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder
-
Returns the outer tolerance
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- outFileNames - Variable in class nxopen.uf.UFDraw.RetrieveDrawingCgmData
-
- outletChannel() - Method in interface nxopen.tooling.SpecifyCircuitBuilder
-
Returns the outlet channel.
- outlineColor() - Method in interface nxopen.assemblies.ProductOutlineBuilder
-
Returns the color for all the objects defined in Product Outline.
- outlineColor() - Method in interface nxopen.cae.xyplot.BarChartStyleSetting
-
Returns the outline color
License requirements: None.
- outlineColor() - Method in interface nxopen.cae.xyplot.BaseBarStyleSetting
-
Returns the outline color
License requirements: None.
- outlineColor() - Method in interface nxopen.cae.xyplot.BasePlateStyleSetting
-
- outlineColor() - Method in interface nxopen.cae.xyplot.SurfaceStyleSetting
-
Returns the outline color
License requirements: None.
- outlineEnlargeTimes() - Method in interface nxopen.tooling.QuickQuotationBuilder
-
Returns the outline enlarge times.
- outlineEnum() - Method in interface nxopen.linedesigner.PlatformEquipmentBuilder
-
Returns the outline type enum
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- outNode() - Method in interface nxopen.cae.ElementConnectivityBuilder
-
Returns the out node which will be replaced
License requirements: None.
- OUTOF_SHEET - Static variable in class nxopen.diagramming.ArrowDirectionType
-
Out of Sheet
- OUTOF_SHEET - Static variable in class nxopen.diagramming.SheetBordersAndZonesBuilder.ArrowDirectionType
-
Out of Sheet
- OUTOF_SHEET - Static variable in class nxopen.drawings.ArrowDirectionType
-
Out of Sheet
- outOfDate() - Method in interface nxopen.validate.ResultObject
-
Returns the out of date status of check result.
- outOfDateColor() - Method in interface nxopen.preferences.PartSketch
-
Returns the sketch out of date curve color
License requirements: None.
- OUTPUT - Static variable in class nxopen.ame.AddressObjectIotype
-
- OUTPUT - Static variable in class nxopen.ame.MemorySectionType
-
- OUTPUT - Static variable in class nxopen.ame.OperatorRuleBuilder.ParameterType
-
- OUTPUT - Static variable in class nxopen.assemblies.productinterface.InterfaceObject.InterfaceUsageType
-
usage type as output
- output() - Method in interface nxopen.cam.ProbeOutputControl
-
Returns the output option
License requirements: None.
- output() - Method in interface nxopen.die.DrawBeadBuilder
-
Returns the output to be constructed by the draw bead feature.
- output() - Method in interface nxopen.drawings.ViewCopyTo3dBuilder
-
Returns the option of output in the setting group
License requirements: None.
- output() - Method in interface nxopen.features.PatchOpeningsBuilder
-
Returns the type of output desired - one feature, multiple features, sewn.
- output() - Method in interface nxopen.features.UnsewBuilder
-
Returns the output body option
License requirements: None.
- output() - Method in interface nxopen.geometricanalysis.sectionanalysis.SectionAnalysisBuilder
-
Returns the output
License requirements: None.
- output() - Method in interface nxopen.geometricanalysis.sectionanalysis.SectionAnalysisExBuilder
-
Returns the output
License requirements: None.
- OUTPUT - Static variable in class nxopen.mechatronics.ExpressionBlockBuilder.SlotType
-
Output that should connect to runtime parameter to output value
- OUTPUT - Static variable in class nxopen.mechatronics.MATLABClientBuilder.DataPortType
-
Output
- OUTPUT - Static variable in class nxopen.mechatronics.PlcSimAdvClientBuilder.AreaType
-
Output
- OUTPUT - Static variable in class nxopen.mechatronics.SignalAdapterBuilder.DataPortType
-
Output
- OUTPUT - Static variable in class nxopen.mechatronics.SignalBuilder.ExternalSignalIOType
-
Output
- OUTPUT - Static variable in class nxopen.mechatronics.SignalBuilder.IOType
-
Output
- OUTPUT - Static variable in class nxopen.mechatronics.SymbolTableBuilder.IOType
-
Output
- OUTPUT - Static variable in class nxopen.pid.PortDirectionOption
-
output.
- output() - Method in interface nxopen.PrintBuilder
-
Returns the shaded image option.
- output() - Method in interface nxopen.weld.ExportWeldBuilder
-
Returns the option defining where to write the output data.
- OUTPUT1 - Static variable in class nxopen.cam.InspectionOutputOperationBuilder.TypeOutput
-
- OUTPUT2 - Static variable in class nxopen.cam.InspectionOutputOperationBuilder.TypeOutput
-
- OUTPUT_AND_WARN - Static variable in class nxopen.cam.BladeCutLevels.IncompleteLevelsTypes
-
Output and Warn
- OUTPUT_BUFFER - Static variable in class nxopen.sim.SimDebugBuilder.DumpType
-
Dump Output Buffer
- OUTPUT_DECIMAL_PLACES - Static variable in class nxopen.cam.InspectionCmmCommandBuilder.CommandTypes
-
Enter a statement defining the number of decimal places for output
- OUTPUT_MODE_ABSOLUTE - Static variable in class nxopen.uf.UFPath.OutputMode
-
- OUTPUT_MODE_INCREMENTAL - Static variable in class nxopen.uf.UFPath.OutputMode
-
- OUTPUT_MODE_LAST_ELEMENT - Static variable in class nxopen.uf.UFPath.OutputMode
-
- OUTPUT_MODE_NONE - Static variable in class nxopen.uf.UFPath.OutputMode
-
- OUTPUT_UNITS_INCH - Static variable in class nxopen.uf.UFSetup.OutputUnits
-
- OUTPUT_UNITS_LAST - Static variable in class nxopen.uf.UFSetup.OutputUnits
-
- OUTPUT_UNITS_METRIC - Static variable in class nxopen.uf.UFSetup.OutputUnits
-
- OUTPUT_UNITS_OUTPUT_DEFINED - Static variable in class nxopen.uf.UFSetup.OutputUnits
-
- OUTPUT_WARNING_ONLY - Static variable in class nxopen.uf.UFParam.LwplaneUsage
-
- outputAfuFileName() - Method in interface nxopen.cae.DurabilityEvaluateFatigueHistoryBuilder
-
Returns the output afu file name.
- outputAttributes() - Method in interface nxopen.weld.InformationBuilder
-
Returns the option to specify if the weld attributes should be included in the output.
- outputBallCenter() - Method in interface nxopen.cam.CAMSetup
-
Returns the setting for ball center output at posting time
License requirements: None.
- OutputBoolean - Interface in nxopen.cae.aerostructures.author
-
Represents a boolean output parameter
No support for KF
.
- outputClsf(CAMObject[], String, String, CAMSetup.OutputUnits) - Method in interface nxopen.cam.CAMSetup
-
Output CLSF
License requirements: cam_base ("CAM BASE")
.
- outputCode - Variable in class nxopen.uf.UFUgmgr.InvokePdmServerData
-
- outputContactData() - Method in interface nxopen.cam.NcmScBuilder
-
Returns the contact data output activation
License requirements: None.
- outputContactPoint() - Method in interface nxopen.cam.Cutcom
-
Returns the cutter compensation output contact point status
License requirements: None.
- outputControlOptions() - Method in interface nxopen.cae.optimization.TBSOptimizationSolution
-
Returns the output control options of the optimization
License requirements: None.
- outputCurves(Feature) - Method in interface nxopen.die.DieCollection
-
Creates/Edits the die output curves feature builder.
- outputCurves - Variable in class nxopen.uf.UFCurve.AskWrapCurvesData
-
- OutputCurvesBuilder - Interface in nxopen.die
-
Represents an output curves feature builder.
- OutputCurvesBuilder.SmoothTypes - Class in nxopen.die
-
Settings for the curve smoothing type.
- OutputCurvesBuilder.TrimCurveCreateTypes - Class in nxopen.die
-
Settings for the trim curve creation type.
- OutputCurvesBuilder.TrimCurveTypes - Class in nxopen.die
-
Settings for the trim curve type.
- OutputCurvesBuilder.TrimOutputCurveTypes - Class in nxopen.die
-
Settings for the trim curve output type.
- outputCurveType() - Method in interface nxopen.features.JoinCurvesBuilder
-
Returns the output curve type.
- outputCylTolerance() - Method in interface nxopen.cam.ProbeToleranceParametersBuilder
-
Returns the option to output the cylindrical tolerance
License requirements: None.
- outputDims - Variable in class nxopen.Sketch.CopyObjectsWithDimensionOutputData
-
Copies of dims
- outputDirectory() - Method in interface nxopen.sim.ExportMachineKitBuilder
-
Returns the machine kit output directory specify where the finished package will be stored.
- outputDirectory() - Method in interface nxopen.sim.ImportMachineKitBuilder
-
Returns the machine kit output directory specify where the finished machine folder will be stored.
- outputDirectory() - Method in interface nxopen.sim.MachineKitBuilder
-
Returns the machine kit output directory.
- outputDirectory() - Method in interface nxopen.VirtuallabImporter
-
Returns the output directory - where the sim file will be created
License requirements: None.
- outputDiretory() - Method in interface nxopen.tooling.RenameAndExportComponentBuilder
-
Returns the output diretory
License requirements: None.
- outputDml() - Method in interface nxopen.cam.InspectionAnalyzeOutputBuilder
-
Generate DML output
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- outputEndTime() - Method in interface nxopen.cae.DurabilityDataControlBuilder
-
Returns the output end time.
- outputExactGeometry() - Method in interface nxopen.features.TrimSheetBuilder
-
Returns the output exact geometry
License requirements: None.
- outputExperience() - Method in interface nxopen.cam.ProbeControlParametersBuilder
-
Returns the option to output the experience value location
License requirements: None.
- OutputFeatureData - Interface in nxopen.features
-
Represents the data of a output feature.
- outputFile() - Method in interface nxopen.AcisExporter
-
Returns the output file - the exported data will be written to file specified
License requirements: None.
- outputFile() - Method in interface nxopen.ASCImporter
-
Returns the output file - name of a file which is being created
License requirements: nx_layout ("NX Layout")
.
- outputFile() - Method in interface nxopen.cam.InspectionAnalyzeOutputBuilder
-
Returns the output file
License requirements: None.
- outputFile() - Method in interface nxopen.cam.InspectionGraphicalReportOutputBuilder
-
Returns the output file
License requirements: None.
- outputFile() - Method in interface nxopen.cam.WorkInstructionOutputBuilder
-
Returns the output file
License requirements: None.
- outputFile() - Method in interface nxopen.Catiav4Creator
-
Returns the output file - the exported data will be written to file specified
License requirements: None.
- outputFile() - Method in interface nxopen.Catiav5Creator
-
Returns the output file - the exported data will be written to file specified
License requirements: None.
- outputFile() - Method in interface nxopen.Catiav5Importer
-
Returns the output file - if V5 file is imported to new part then this name will be used to
write the output.
- outputFile() - Method in interface nxopen.DxfdwgCreator
-
Returns the output file - the name of dxf/dwg file where output is being written
License requirements: None.
- outputFile() - Method in interface nxopen.DxfdwgImporter
-
Returns the OutputFile command - if autocad file is imported to the new part then this name will be used to
write the output.
- outputFile() - Method in interface nxopen.features.sheetmetal.ExportFlatPatternBuilder
-
Returns the output file used to export flat pattern curves
License requirements: None.
- outputFile() - Method in interface nxopen.features.shipdesign.FrameBarOutBuilder
-
Returns the output file name.
- outputFile() - Method in interface nxopen.features.shipdesign.ManufacturingOutBuilder
-
Returns the output spreadsheet file
License requirements: None.
- outputFile() - Method in interface nxopen.IgesCreator
-
Returns the output file - the name of iges file where output is being written
License requirements: None.
- outputFile() - Method in interface nxopen.IgesImporter
-
Returns the output file - if iges file is imported to new part then this name will be used to
write the output.
- outputFile() - Method in interface nxopen.NXTo2dCreator
-
Returns the output file - the name of nx/iges/dxf/dwg file where output is being written
License requirements: None.
- outputFile() - Method in interface nxopen.ProeImporter
-
Returns the output file - if proe file is imported to new part then this name will be used to
write the output.
- outputFile() - Method in interface nxopen.Step203Creator
-
- outputFile() - Method in interface nxopen.Step203Importer
-
Returns the output file - if iges file is imported to new part then this name will be used to
write the output.
- outputFile() - Method in interface nxopen.Step214Creator
-
- outputFile() - Method in interface nxopen.Step214Importer
-
Returns the output file - if iges file is imported to new part then this name will be used to
write the output.
- outputFile() - Method in interface nxopen.Step242Importer
-
Returns the output file - if iges file is imported to new part then this name will be used to
write the output.
- outputFile() - Method in interface nxopen.StepCreator
-
Returns the output file - the name of step file where output is being written
License requirements: None.
- outputFile() - Method in interface nxopen.STLCreator
-
Returns the output file - the exported data will be written to file specified
License requirements: None.
- outputFile() - Method in interface nxopen.tooling.LsdynaKfileGeneratorBuilder
-
Returns the output file
License requirements: None.
- outputFile() - Method in interface nxopen.tooling.SIZERExportBuilder
-
Returns the output *.mdix file, which is exported to SIZER.
- outputFileDir() - Method in interface nxopen.cae.connections.ComposerData
-
Returns the output file direction
License requirements: None.
- outputFileName() - Method in interface nxopen.layout2d.ExportComponentHierarchyBuilder
-
Returns the selected output file
License requirements: None.
- outputFileType() - Method in interface nxopen.DxfdwgCreator
-
Returns the output file type - this option determines the format of output file, It can either be dxf or dwg.
- outputFileType() - Method in interface nxopen.NXTo2dCreator
-
Returns the output file type - output file format
License requirements: None.
- outputFilletFaceInfo() - Method in interface nxopen.weld.ExportWeldJointBuilder
-
Returns the indication to output face normals at each point if leg lengths are defined.
- outputFolder() - Method in interface nxopen.tooling.CloneObject
-
Returns the destination folder
License requirements: None.
- outputFormat() - Method in interface nxopen.cam.InspectionAnalyzeOutputBuilder
-
Returns the analysis results output file format
License requirements: None.
- outputFormat() - Method in interface nxopen.cam.InspectionGraphicalReportOutputBuilder
-
Returns the output format
License requirements: None.
- outputFormat() - Method in interface nxopen.cam.WorkInstructionOutputBuilder
-
Returns the output format
License requirements: None.
- outputGeometryType() - Method in interface nxopen.weld.GrooveBuilder
-
- outputgroup - Variable in class nxopen.cae.modelcheck.ElementEdgeCheckBuilder.DoCheckData
-
output group for free and/or non-manifold element edges
- outputindex - Variable in class nxopen.cam.MillingTrackpointBuilder.AddData
-
output actual index of new track point, if error happens, output will be -1
- OutputInteger - Interface in nxopen.cae.aerostructures.author
-
Represents an integer output parameter
No support for KF
.
- outputJtFile() - Method in interface nxopen.JtCreator
-
Returns the output file - the name of jt file where output is being written
License requirements: None.
- outputLayer() - Method in interface nxopen.features.sheetmetal.MetaformBuilder
-
Returns the output layer.
- outputLengthAndVolume() - Method in interface nxopen.weld.InformationBuilder
-
Returns the option to specify if the weld length and volume should be calculated for the output.
- outputLoadTool() - Method in interface nxopen.cam.Ude
-
Returns the output load tool
License requirements: None.
- outputLogFile() - Method in interface nxopen.pdm.PartOperationImportBuilder
-
Returns the output log file
License requirements: None.
- outputMaterialsToLibrary(String[], String[], String) - Method in interface nxopen.PhysicalMaterialCollection
-
Writes out materials to a material library file.
- outputMethod() - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
Returns the curve output method - geometric, corrected or both
License requirements: None.
- outputMethod() - Method in interface nxopen.geometricanalysis.GeometricProperties
-
Returns the output method
License requirements: None.
- outputMode() - Method in interface nxopen.cam.FeedsWedmBuilder
-
Returns the output mode
License requirements: cam_base ("CAM BASE")
.
- outputMultipleSheets() - Method in interface nxopen.features.SewBuilder
-
Returns the output multiple sheets
License requirements: None.
- outputNames - Variable in class nxopen.uf.UFClone.NamingFailures
-
- outputNullBandTolerance() - Method in interface nxopen.cam.ProbeToleranceParametersBuilder
-
Returns the option to output the null band tolerance zone
License requirements: None.
- outputObjects() - Method in interface nxopen.drafting.CutCopyPasteBuilder
-
Returns the output Objects
License requirements: None.
- outputObjects - Variable in class nxopen.Sketch.CopyObjectsWithDimensionOutputData
-
Copies of objects
- outputOperatorMessage() - Method in interface nxopen.cam.TurnRoughFinishLocalReturnBuilder
-
Returns the output operator message option
License requirements: None.
- outputOpskip() - Method in interface nxopen.cam.TurnRoughFinishLocalReturnBuilder
-
Returns the output opskip option
License requirements: None.
- outputOpstop() - Method in interface nxopen.cam.TurnRoughFinishLocalReturnBuilder
-
Returns the output opstop option
License requirements: None.
- outputOption() - Method in interface nxopen.cae.SolidPropertyCheckBuilder
-
Returns the detail output option
License requirements: None.
- outputOption() - Method in interface nxopen.cam.CenterlineDrillTurningBuilder
-
Returns the output option
License requirements: None.
- outputOption() - Method in interface nxopen.features.OffsetSurfaceBuilder
-
- outputOption() - Method in interface nxopen.features.PatternFeatureBuilder
-
Returns the output option
License requirements: None.
- outputOption() - Method in interface nxopen.features.TubeBuilder
-
Returns the output topology option
License requirements: None.
- outputOption() - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder
-
Returns the output option
License requirements: None.
- outputOvertravel() - Method in interface nxopen.cam.ProbeControlParametersBuilder
-
Returns the option to output the probe overtravel distance
License requirements: None.
- OutputParameter - Interface in nxopen.cae.aerostructures.author
-
Parent class of all the typed output parameter classes
No support for KF
.
- outputPartSpec - Variable in class nxopen.uf.UFClone.AskNamingData
-
- outputPath() - Method in interface nxopen.tooling.LsdynaKfileGeneratorBuilder
-
Returns the output path
License requirements: None.
- outputPDF() - Method in interface nxopen.tooling.EWDraftingBuilder
-
Returns the option used to output pdf file when creating drafting.
- outputPercentFeedback() - Method in interface nxopen.cam.ProbeControlParametersBuilder
-
Returns the option to output the percent feedback
License requirements: None.
- outputPlane() - Method in interface nxopen.cam.Cutcom
-
Returns the cutter compensation output plane status
License requirements: None.
- outputPoints() - Method in interface nxopen.features.SectionCurveBuilder
-
Returns the output points
License requirements: None.
- OutputPortAssociation - Interface in nxopen.motion
-
- OutputPortAssociationList - Interface in nxopen.motion
-
Represents a list of objects.
- outputPortsList() - Method in interface nxopen.motion.MechatronicsBuilder
-
Returns the output ports list
License requirements: mechanisms ("MECHANISMS")
.
- outputReferences() - Method in interface nxopen.geometricutilities.PartModuleOutputBuilder
-
- outputReferences1() - Method in interface nxopen.geometricutilities.PartModuleOutputBuilder1
-
Returns the new part module output data
License requirements: None.
- outputRequest() - Method in interface nxopen.cae.responsesimulation.ModalResultsEvaluationSettingBuilder
-
Returns the destination direction data component
License requirements: nx_response_anlys ("NX Response Analysis")
.
- outputResults(ListingWindow.DeviceType, String) - Method in interface nxopen.cam.InspectionLinkPmiBuilder
-
Output results report from Link PMI.
- outputs() - Method in interface nxopen.motion.Mechatronics
-
- outputSameSheet() - Method in interface nxopen.tooling.EWDraftingBuilder
-
Returns the option used to output all the blanks in the same sheet.
- OutputScalar - Interface in nxopen.cae.aerostructures.author
-
Represents a scalar output parameter
No support for KF
.
- outputSetting() - Method in interface nxopen.cae.responsesimulation.RSEventBuilder
-
Returns the output setting
License requirements: nx_response_anlys ("NX Response Analysis")
.
- outputSettings() - Method in interface nxopen.cae.responsesimulation.FunctionEvaluationSettingBuilder
-
Returns the output setting.
- outputStartTime() - Method in interface nxopen.cae.DurabilityDataControlBuilder
-
Returns the output start time.
- outputState() - Method in interface nxopen.ConvertToFromReferenceBuilder
-
Returns the output type.
- outputState() - Method in interface nxopen.tooling.LsdynaKfileGeneratorBuilder
-
Returns the output state which will be used to control the result display.
- outputStop() - Method in interface nxopen.cam.TurnRoughFinishLocalReturnBuilder
-
Returns the output stop option
License requirements: None.
- outputString - Variable in class nxopen.uf.UFUgmgr.InvokePdmServerData
-
- outputSurfaceOption() - Method in interface nxopen.features.SilhouetteFlangeBuilder
-
Returns the output surface option
License requirements: None.
- OutputText - Interface in nxopen.cae.aerostructures.author
-
Represents a text output parameter
No support for KF
.
- outputText() - Method in interface nxopen.cam.InspectionAnalyzeOutputBuilder
-
Generate text output
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- outputText() - Method in interface nxopen.CGMBuilder
-
Returns the output text of the CGM.
- outputText() - Method in interface nxopen.PrintPDFBuilder
-
Returns the output text of the PDF.
- outputTo() - Method in interface nxopen.DxfdwgCreator
-
Returns the output to - where to put data in model world or layout
License requirements: None.
- outputTo() - Method in interface nxopen.NXTo2dCreator
-
Returns the output to - where to put data in model world or drawing
License requirements: None.
- outputTolerance() - Method in interface nxopen.cam.ProbeToleranceParametersBuilder
-
Returns the option to output the tolerance
License requirements: None.
- outputToolOffset() - Method in interface nxopen.cam.ProbeControlParametersBuilder
-
Returns the option to output the tool offset to update
License requirements: None.
- outputType() - Method in interface nxopen.cae.FluidDomainBuilder
-
- outputType() - Method in interface nxopen.cam.ArcOutputTypeCiBuilder
-
Returns the Motion Output Type
License requirements: None.
- outputType() - Method in interface nxopen.cam.CleanupOutput
-
Returns the Output Type, Cleanup Geometry Output
License requirements: None.
- outputType() - Method in interface nxopen.cam.WedmArcOutputTypeCiBuilder
-
Returns the Motion Output Type
License requirements: None.
- outputType() - Method in interface nxopen.facet.ConvertFacetBodyBuilder
-
Returns the output type of converted facet body
License requirements: None.
- outputType() - Method in interface nxopen.facet.FacetBodyFromBodyBuilder
-
Returns the output of the type of enum
License requirements: None.
- outputType() - Method in interface nxopen.features.shipdesign.ProfileListBuilder
-
Returns the output type: Spreadsheet or XML
License requirements: None.
- outputType() - Method in interface nxopen.motion.ControlOutputBuilder
-
Returns the Control Output type.
- outputType() - Method in interface nxopen.STLCreator
-
Returns the output type - this will decide if output type should be binary or text
License requirements: None.
- outputType() - Method in interface nxopen.weld.GrooveBuilder
-
- OutputType - Class in nxopen.weld
-
Settings for output type .
- outputType() - Method in interface nxopen.weld.WeldBeadBuilder
-
Returns the output type which controls the update behaviour of the bead feature.
- outputType() - Method in interface nxopen.weld.WeldPointBuilder
-
Returns the output type.
- outputTypeAsString() - Method in interface nxopen.blockstyler.SpecifyCSYS
-
Returns the OutputType as string
License requirements: None.
- outputUncutRegions() - Method in interface nxopen.cam.MillCutParameters
-
Returns the output uncut regions
License requirements: None.
- OutputUncutRegions - Interface in nxopen.cam
-
- outputUnit() - Method in interface nxopen.cam.PitchSetting
-
Returns the output unit
License requirements: None.
- outputUpperTolerance() - Method in interface nxopen.cam.ProbeToleranceParametersBuilder
-
Returns the option to output the upper tolerance limit
License requirements: None.
- outputWorkOffset() - Method in interface nxopen.cam.ProbeCalibrateStylusMoveBuilder
-
Returns the option to output the work offset to update
License requirements: None.
- outputWorkOffset() - Method in interface nxopen.cam.ProbeControlParametersBuilder
-
Returns the option to output the work offset to update
License requirements: None.
- OUTSIDE - Static variable in class nxopen.assemblies.BoxSearchTerm.BoxOverlapLogicType
-
Include objects residing outside the box defined by this search term
- OUTSIDE - Static variable in class nxopen.cae.RadiusType
-
outside radius
- OUTSIDE - Static variable in class nxopen.cam.ToolPathEditorBuilder.TrimSideType
-
- OUTSIDE - Static variable in class nxopen.display.PointCloudClippingBoxesListItemBuilder.ClippingSides
-
outside
- OUTSIDE - Static variable in class nxopen.display.SelPref.SelectionRule
-
multi-select rule outside
- OUTSIDE - Static variable in class nxopen.features.sheetmetal.AdvancedFlangeBuilder.LengthReferences
-
- OUTSIDE - Static variable in class nxopen.features.sheetmetal.AeroFlangeBuilder.DimType
-
Outside Dimension
- OUTSIDE - Static variable in class nxopen.features.sheetmetal.DimpleBuilder.SidewallTypeOptions
-
the innerface of the dimple side walls coincides with the section outline.
- OUTSIDE - Static variable in class nxopen.features.sheetmetal.DrawnCutoutBuilder.SidewallTypeOptions
-
the innerface of the drawn cutout side walls coincides with the section outline.
- OUTSIDE - Static variable in class nxopen.features.sheetmetal.FlangeBendPropertiesBuilder.LengthReferences
-
- OUTSIDE - Static variable in class nxopen.features.sheetmetal.FlangeBuilder.OffsetTypeOptions
-
The flange is offset to the outside of the face
- OUTSIDE - Static variable in class nxopen.features.TrimCurveBuilder.CurveTrimRegionOptions
-
Outside
- OUTSIDE - Static variable in class nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder.NeedleDirection
-
needle pointing outside
- OUTSIDE - Static variable in class nxopen.geometricanalysis.sectionanalysis.SectionAnalysisBuilder.NeedleDirectionType
-
Outside
- OUTSIDE - Static variable in class nxopen.geometricanalysis.sectionanalysis.SectionAnalysisExBuilder.NeedleDirectionType
-
Outside
- OUTSIDE - Static variable in class nxopen.geometricanalysis.SurfaceIntersectionBuilder.DirectionTypes
-
needle pointing outside
- OUTSIDE - Static variable in class nxopen.positioning.ConstraintReference.ConstraintOrder
-
Outside
- OUTSIDE - Static variable in class nxopen.routing.DuctReinforcementBuilder.ReinforcementTypes
-
- outside - Variable in class nxopen.uf.UFGdt.AskProfileTolData
-
- OUTSIDE_BODY - Static variable in class nxopen.features.shipdesign.PlateBuilder.RegionOptions
-
- OUTSIDE_CROSSING - Static variable in class nxopen.display.SelPref.SelectionRule
-
multi-select rule outside or crossing
- OUTSIDE_DIMENSION - Static variable in class nxopen.features.sheetmetal.FlangeBuilder.LengthTypeOptions
-
The flange length is dimensioned to the Outer Mold Line.
- OUTSIDE_IN - Static variable in class nxopen.cam.Sequence.Types
-
Outside-In
- OUTSIDE_IN_ALTERNATE - Static variable in class nxopen.cam.GuidedCurveCutOrder.CutOrderOption
-
- OUTSIDE_IN_ALTERNATE - Static variable in class nxopen.cam.Sequence.Types
-
Outside-In Alternate
- OUTSIDE_MODELLING - Static variable in class nxopen.PartCollection.SdpsStatus
-
The modelling application is not active
- OUTSIDE_OR_INTERSECTS - Static variable in class nxopen.assemblies.BoxSearchTerm.BoxOverlapLogicType
-
Include objects residing outside or intersecting the box defined by this search term
- OUTSIDE_OR_RIGHT - Static variable in class nxopen.cam.BoundarySet.ToolSideTypes
-
outside for closed boundary, or right side for open boundary
- OUTSIDE_RADIUS - Static variable in class nxopen.cae.MeshControlBuilder.FilletType
-
- OUTSIDE_SEAT_THRU_SEAT_SPRING - Static variable in class nxopen.features.vehicledesign.SeatBeltAnchorageBuilder.RoutingTypes
-
outside
- outsideThickness() - Method in interface nxopen.features.MidSurfaceUserDefinedBuilder
-
Returns the outside thickness to be used during Fem solve if the node falls outside of solid
License requirements: None.
- outterWallProfile() - Method in interface nxopen.tooling.DieDesignLowerBinderBuilder
-
Returns the inner profile used in Lower Binder, it is optional
License requirements: ug_die_design ("Die Design")
.
- outtol() - Method in interface nxopen.cam.GeometrySet
-
Returns the outer tolerance value
License requirements: None.
- outtol() - Method in interface nxopen.cam.SurfaceDriveGeometrySet
-
Returns the outer tolerance value
License requirements: None.
- outtol() - Method in interface nxopen.cam.WedmBasedGeomBuilder
-
Returns the outtol value
License requirements: cam_base ("CAM BASE")
.
- outtol() - Method in interface nxopen.cam.WedmCutParameters
-
Returns the outtol value
License requirements: cam_base ("CAM BASE")
.
- outTolerance() - Method in interface nxopen.cam.BoundaryMemberSetPlanarMill
-
Returns the outtol value
License requirements: None.
- outTolerance() - Method in interface nxopen.cam.BoundarySetPlanarMill
-
Returns the out tolerance
License requirements: None.
- outTolerance - Variable in class nxopen.uf.UFBound.Tolerance
-
- outWallThickness() - Method in interface nxopen.tooling.DieDesignLowerBinderBuilder
-
Returns the out wall thickness
License requirements: ug_die_design ("Die Design")
.
- OUTWARD - Static variable in class nxopen.cam.AreaMillingNonSteepContainment.AmPocketDirTypes
-
Outward
- OUTWARD - Static variable in class nxopen.cam.AreaMillingNonSteepContainment.PatternDirectionTypes
-
Outward
- OUTWARD - Static variable in class nxopen.cam.CutParametersPatternDirectionTypes
-
Outward
- OUTWARD - Static variable in class nxopen.cam.DmAmBuilder.AmPocketDirTypes
-
Outward
- OUTWARD - Static variable in class nxopen.cam.DmBndBuilder.BndPocketDirTypes
-
Outward
- OUTWARD - Static variable in class nxopen.cam.FlowCutSteepContainment.PatternDirectionTypes
-
Outward
- OUTWARD - Static variable in class nxopen.PlaneNormalOrientation
-
- oVecDir - Variable in class nxopen.uf.UFModl.SmslotData
-
- OVER_CONSTRAINED - Static variable in class nxopen.positioning.Constraint.SolverStatus
-
Conflicts with other constraints
- OVER_CONSTRAINED - Static variable in class nxopen.Sketch.Status
-
The sketch has more constraints than is needed
- OVER_CONSTRAINED - Static variable in class nxopen.uf.UFSket.Status
-
- OVER_DEFINED - Static variable in class nxopen.positioning.Network.ObjectStatus
-
Conflicts with other constraints.
- OVER_DIMENSION_LINE - Static variable in class nxopen.annotations.TextOrientation
-
Specifies dimenson text aligned with and above
the dimension line
- OVER_MAXIMUM_WEIGHT - Static variable in class nxopen.uf.UFWeight.ExceptionReason
-
- OVER_STOCK - Static variable in class nxopen.routing.StockBrowserBuilder.TypeFilter
-
Overstock
- overallResult() - Method in interface nxopen.cae.modelcheck.ElementTestResult
-
Returns the overrall result of this element.
- overallSize() - Method in interface nxopen.cae.MeshControlBuilder
-
Returns the value stored in Size field.
- overallTranslucency() - Method in interface nxopen.display.ImageBaseBuilder
-
Returns the overall translucency.
- OVERBEND - Static variable in class nxopen.features.GlobalShapingBuilder.DeformationTypeValues
-
Overbend
- OVERBEND - Static variable in class nxopen.tooling.BendOperationBuilder.Types
-
overbend operation
- OVERBEND - Static variable in class nxopen.tooling.DirectUnbendBuilder.Bendtypes
-
overbend operation
- overbendAngle() - Method in interface nxopen.tooling.BendOperationBuilder
-
Returns the overbend angle.
- overbendAngle() - Method in interface nxopen.tooling.DirectUnbendBuilder
-
Returns the overbend angle.
- overbendOption() - Method in interface nxopen.tooling.BendOperationBuilder
-
Returns the overbend option
License requirements: None.
- overbendRadius() - Method in interface nxopen.tooling.BendOperationBuilder
-
Returns the overbend radius.
- overconstrainedColor() - Method in interface nxopen.preferences.PartSketch
-
Returns the sketch overconstrained color
License requirements: None.
- OVERCROWN - Static variable in class nxopen.features.GlobalShapingBuilder.ModifyMethodType
-
By Surface overcrown modify
- OVERCROWN - Static variable in class nxopen.features.OvercrownBuilder.OperationType
-
- OvercrownBuilder - Interface in nxopen.features
-
- OvercrownBuilder.ControlType - Class in nxopen.features
-
This enum represents the control type of Global Shaping Operation
- OvercrownBuilder.OperationType - Class in nxopen.features
-
This enum represents the type of Global Shaping Operation
- OvercrownBuilder.OutputType - Class in nxopen.features
-
This enum represents the output type of Global Shaping Operation
- OvercrownBuilder.TransitionType - Class in nxopen.features
-
This enum represents the transition type of Global Shaping Operation
- OVERCROWNBY_FUNCTION - Static variable in class nxopen.tooling.DieEngStampingOutputBuilder.SpringbackMethodType
-
- OVERCROWNBY_SURFACE - Static variable in class nxopen.tooling.DieEngStampingOutputBuilder.SpringbackMethodType
-
- OVERCUT - Static variable in class nxopen.tooling.ScrapDesignBuilder.AddonType
-
Creates overcut
- OVERCUT - Static variable in class nxopen.tooling.ScrapDesignBuilder.RemoveType
-
Captures overcuts
- overcutColor() - Method in interface nxopen.tooling.ScrapDesignBuilder
-
Returns the overcut color
License requirements: None.
- overcutEdge() - Method in interface nxopen.tooling.ScrapDesignBuilder
-
Returns the edge that overcut will be attached
License requirements: None.
- overcutOperation() - Method in interface nxopen.tooling.ScrapDesignBuilder
-
Returns the overcut operation, which includes normal type, tangent type, circular type and rectangular type
License requirements: None.
- overflow - Variable in class nxopen.cae.Post.Colorbar
-
- OVERFLOW_BORDER - Static variable in class nxopen.diagramming.tables.OverflowBehavior
-
Overflow border overflow behavior
- OVERFLOW_DOWN - Static variable in class nxopen.uf.UFTabnot.OverflowDirection
-
- OVERFLOW_LEFT - Static variable in class nxopen.uf.UFTabnot.OverflowDirection
-
- OVERFLOW_NEXT_SHEET - Static variable in class nxopen.uf.UFTabnot.OverflowDirection
-
- OVERFLOW_RIGHT - Static variable in class nxopen.uf.UFTabnot.OverflowDirection
-
- OVERFLOW_UP - Static variable in class nxopen.uf.UFTabnot.OverflowDirection
-
- overflowAboveColor - Variable in class nxopen.cae.Post.Colorbar
-
- overflowBehavior() - Method in interface nxopen.diagramming.tables.CellSettingsBuilder
-
Returns the overflow behavior of the cell settings.
- OverflowBehavior - Class in nxopen.diagramming.tables
-
Represents the cell overflow behavior.
- overflowBelowColor - Variable in class nxopen.cae.Post.Colorbar
-
- overflowColor() - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
Returns the overflow color
License requirements: None.
- overflowDirection - Variable in class nxopen.uf.UFTabnot.SectionPrefs
-
- overflowOption() - Method in interface nxopen.features.FaceBlendBuilder
-
Returns the overflow option for face blend
License requirements: None.
- overflowSpacing - Variable in class nxopen.uf.UFTabnot.SectionPrefs
-
- overhang() - Method in interface nxopen.die.ClampingSlotBuilder
-
Returns the amount the pad will overhang from the flange
License requirements: None.
- overhang() - Method in interface nxopen.drawings.ViewSectionLineBuilder
-
Returns the stub length
License requirements: None.
- overhangFacesAttributes() - Method in interface nxopen.die.ClampingSlotBuilder
-
Returns the attributes for the overhang faces
License requirements: None.
- OVERLAP - Static variable in class nxopen.cae.connections.SeamWeldMaterialType
-
Seam weld overlap material type
- OVERLAP - Static variable in class nxopen.features.sheetmetal.ClosedCornerBuilder.ClosureTypeOptions
-
- overlap() - Method in interface nxopen.features.sheetmetal.ClosedCornerBuilder
-
Returns the overlap.
- overlap() - Method in interface nxopen.features.shipdesign.InverseBendingLinesBuilder
-
Returns the overlap distance of the bending curves.
- OVERLAP - Static variable in class nxopen.features.vehicledesign.CrashBarrierBuilder.CrossPositionType
-
- OVERLAP - Static variable in class nxopen.tooling.ScrapDesignBuilder.AddonType
-
Creates overlap
- OVERLAP - Static variable in class nxopen.tooling.ScrapDesignBuilder.RemoveType
-
Captures overlaps
- OVERLAP - Static variable in class nxopen.weld.JointmarkBuilder.ReferenceSheetTypes
-
Overlap
- OVERLAP - Static variable in class nxopen.weld.WeldPointReferenceSheetType
-
spot welds are based on the intersection of face sets
- overlap1 - Variable in class nxopen.uf.UFUgfont.FontHeader
-
- overlap2 - Variable in class nxopen.uf.UFUgfont.FontHeader
-
- overlap3 - Variable in class nxopen.uf.UFUgfont.FontHeader
-
- OVERLAP_ELEMS - Static variable in class nxopen.cae.Laminate.ZoneType
-
Zone with elements that were assigned to more that one layup
- OVERLAP_SPIRAL - Static variable in class nxopen.mechanicalrouting.InsulationBuilder.WrapType
-
Overlap Spiral
- OVERLAP_SPIRAL - Static variable in class nxopen.routing.OverstockBuilder.WrapType
-
Overlap Spiral
- overlapAngle() - Method in interface nxopen.cam.NcmHoleMachining
-
Returns the overlap angle
License requirements: None.
- overlapColor() - Method in interface nxopen.tooling.ScrapDesignBuilder
-
Returns the overlap color
License requirements: None.
- overlapDelta() - Method in interface nxopen.motion.JointFrictionAdams
-
Returns the overlap delta
License requirements: mechanisms ("MECHANISMS")
.
- overlapDelta() - Method in interface nxopen.motion.JointFrictionRecurDyn
-
Returns the overlap delta
License requirements: mechanisms ("MECHANISMS")
.
- overlapDistance() - Method in interface nxopen.cam.LaserTeachMode
-
Returns the Overlap Distance
License requirements: None.
- overlapDistance() - Method in interface nxopen.cam.NcmHoleMachining
-
Returns the overlap distance
License requirements: None.
- overlapDistance() - Method in interface nxopen.cam.OutputUncutRegions
-
Returns the overlap distance
License requirements: None.
- overlapDistance() - Method in interface nxopen.cam.ToolPathSplitParametersBuilder
-
Returns the overlap distance builder
License requirements: None.
- overlapDistanceBuilder() - Method in interface nxopen.cam.NcmPlanarBuilder
-
Returns the start/drill points overlap distance builder (inheritable tool dep)
License requirements: None.
- overlapDistanceBuilder() - Method in interface nxopen.cam.WedmCutParameters
-
Returns the overlap_distance_builder
License requirements: cam_base ("CAM BASE")
.
- overlapOption() - Method in interface nxopen.features.EdgeBlendBuilder
-
Returns the overlap resolution for edge blend
License requirements: None.
- OVERLAPPED - Static variable in class nxopen.features.sheetmetal.EditCornerBuilder.PlateClosureTypeOptions
-
- OVERLAPPED - Static variable in class nxopen.routing.WrapApplicationType
-
Overlapping spiral wrap application, e.g., [0-100)% overlap
- overlapPercentage() - Method in interface nxopen.mechanicalrouting.InsulationBuilder
-
- overlapPercentage() - Method in interface nxopen.routing.OverstockBuilder
-
Returns the percentage overlap if the
OverstockBuilder.WrapType
is
OverstockBuilder.WrapType.OVERLAP_SPIRAL
License requirements: routing_advanced ("Routing Advanced") OR routing_harness ("Routing Harness") OR routing_cabling ("Routing Cabling") OR routing_pipetube ("Routing Piping and Tubing") OR routing_hvac ("Routing HVAC") OR routing_platform ("Routing Platform") OR routing_pid ("Routing PID")
Created in NX6.0.0
- OVERLAPPING_FACES - Static variable in class nxopen.uf.UFSf.FaceSubdivStatus
-
- overlappingColor() - Method in interface nxopen.cae.BCSelectionDisplayBuilder
-
Returns the overlapping target sets displayed color
License requirements: None.
- overlappingEntities() - Method in interface nxopen.DxfdwgCreator
-
Returns the overlapping entities - if set to true the overlapping entities will be removed before exporting
License requirements: None.
- overlappingEntities() - Method in interface nxopen.NXTo2dCreator
-
Returns the overlapping entities - if set to true, the overlpping entities will be removed
License requirements: None.
- overlapRatio() - Method in interface nxopen.features.sheetmetal.EditCornerBuilder
-
Returns the overlap ratio between plates
License requirements: None.
- overlapTextAndVector() - Method in interface nxopen.cae.xyplot.VectorStyle2DSetting
-
Returns a value indicating whether to allow the annotation text overlap with vector
License requirements: None.
- overlapType() - Method in interface nxopen.cam.NcmHoleMachining
-
Returns the region start type
License requirements: None.
- overlapWidth() - Method in interface nxopen.tooling.ScrapDesignBuilder
-
Returns the overlap width
License requirements: None.
- OVERLAY - Static variable in class nxopen.drawings.ViewPlacementBuilder.Method
-
Align the view on top of another view
- overlayColor() - Method in interface nxopen.drawings.VisualDrawingComparePrefsBuilder
-
Returns the overlay color
License requirements: None.
- overlayDataToUse() - Method in interface nxopen.drawings.VisualDrawingComparePrefsBuilder
-
Returns the overlay data to use
License requirements: None.
- OverlayParameters - Interface in nxopen.cae.xyplot
-
Represents the parameters passed to overlay plot records on an existing plot graph.
- overlayRecords(OverlayParameters) - Method in interface nxopen.cae.xyplot.XYPlotManager
-
Overlay records with given parameters
License requirements: None.
- OVERRIDDEN - Static variable in class nxopen.uf.UFParam.Status
-
- overriddenValue - Variable in class nxopen.uf.UFMfm.AskDoubleValueOfAttributeData
-
- overriddenValue - Variable in class nxopen.uf.UFMfm.AskIntegerValueOfAttributeData
-
- overriddenValue - Variable in class nxopen.uf.UFMfm.AskLogicalValueOfAttributeData
-
- overriddenValue - Variable in class nxopen.uf.UFMfm.AskStringValueOfAttributeData
-
- OVERRIDE - Static variable in class nxopen.ame.ImportEclassMappingMode
-
- OVERRIDE - Static variable in class nxopen.cae.AfuManager.WritingFileMode
-
Opens an empty file for writing.
- OVERRIDE - Static variable in class nxopen.features.shipdesign.StiffenerBuilder.AttachmentOption
-
Use the selected attachment plate on which to attach the stiffener
- override() - Method in interface nxopen.routing.DesignRuleViolation
-
Returns the override object for the violation is inquired
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- Override - Interface in nxopen.validate
-
- override() - Method in interface nxopen.validate.ResultObject
-
Returns the override request object of check result
License requirements: None.
- OVERRIDE_BLACK_GLOSSY_PLASTIC - Static variable in class nxopen.display.TrueShadingBuilder.MaterialType
-
Black Glossy Plastic
- OVERRIDE_BLUE_GLOSSY_PLASTIC - Static variable in class nxopen.display.TrueShadingBuilder.MaterialType
-
Blue Glossy Plastic
- OVERRIDE_BRASS - Static variable in class nxopen.display.TrueShadingBuilder.MaterialType
-
Brass
- OVERRIDE_BROWN_GLOSSY_PLASTIC - Static variable in class nxopen.display.TrueShadingBuilder.MaterialType
-
Brown Glossy Plastic
- OVERRIDE_BRUSHED_ALUMINUM - Static variable in class nxopen.display.TrueShadingBuilder.MaterialType
-
Brushed Aluminum
- OVERRIDE_BRUSHED_CHROME - Static variable in class nxopen.display.TrueShadingBuilder.MaterialType
-
Brushed Chrome
- OVERRIDE_BRUSHED_TITANIUM - Static variable in class nxopen.display.TrueShadingBuilder.MaterialType
-
Brushed Titanium
- OVERRIDE_CHROME - Static variable in class nxopen.display.TrueShadingBuilder.MaterialType
-
Chrome
- OVERRIDE_CLEAR_PLASTIC - Static variable in class nxopen.display.TrueShadingBuilder.MaterialType
-
Clear Plastic
- OVERRIDE_COPPER - Static variable in class nxopen.display.TrueShadingBuilder.MaterialType
-
Copper
- OVERRIDE_GLASS_CLEAR - Static variable in class nxopen.display.TrueShadingBuilder.MaterialType
-
Clear Glass
- OVERRIDE_GLASS_SMOKEY - Static variable in class nxopen.display.TrueShadingBuilder.MaterialType
-
Smokey Glass
- OVERRIDE_GOLD - Static variable in class nxopen.display.TrueShadingBuilder.MaterialType
-
Gold
- OVERRIDE_GRAY_GLOSSY_PLASTIC - Static variable in class nxopen.display.TrueShadingBuilder.MaterialType
-
Gray Glossy Plastic
- OVERRIDE_GREEN_GLOSSY_PLASTIC - Static variable in class nxopen.display.TrueShadingBuilder.MaterialType
-
Green Glossy Plastic
- OVERRIDE_METALLIC_PAINT_BLACK - Static variable in class nxopen.display.TrueShadingBuilder.MaterialType
-
Black Metallic Paint
- OVERRIDE_METALLIC_PAINT_BLUE - Static variable in class nxopen.display.TrueShadingBuilder.MaterialType
-
Blue Metallic Paint
- OVERRIDE_METALLIC_PAINT_GRAY - Static variable in class nxopen.display.TrueShadingBuilder.MaterialType
-
Gray Metallic Paint
- OVERRIDE_METALLIC_PAINT_RED - Static variable in class nxopen.display.TrueShadingBuilder.MaterialType
-
Red Metallic Paint
- OVERRIDE_PART - Static variable in class nxopen.BasePart.CollaborativeContentType
-
Override Part
- OVERRIDE_RED_GLOSSY_PLASTIC - Static variable in class nxopen.display.TrueShadingBuilder.MaterialType
-
Red Glossy Plastic
- OVERRIDE_ROUGH_METAL_DK_GRAY - Static variable in class nxopen.display.TrueShadingBuilder.MaterialType
-
Dark Grey Texture
- OVERRIDE_ROUGH_METAL_MED_GRAY - Static variable in class nxopen.display.TrueShadingBuilder.MaterialType
-
Medium Grey Texture
- OVERRIDE_ROUGH_PLASTIC_BLUE_GRAY - Static variable in class nxopen.display.TrueShadingBuilder.MaterialType
-
Blue Grey Texture
- OVERRIDE_ROUGH_PLASTIC_TAN - Static variable in class nxopen.display.TrueShadingBuilder.MaterialType
-
Tan Texture
- OVERRIDE_RUBBER - Static variable in class nxopen.display.TrueShadingBuilder.MaterialType
-
Black Rubber
- OVERRIDE_STANDARD - Static variable in class nxopen.menubar.MenuBarManager.CallbackStatus
-
Inhibit further actions because a pre
action took the place of the standard
action for a standard NX menu item.
- OVERRIDE_STEEL - Static variable in class nxopen.display.TrueShadingBuilder.MaterialType
-
Steel
- OVERRIDE_TEAL_GLOSSY_PLASTIC - Static variable in class nxopen.display.TrueShadingBuilder.MaterialType
-
Teal Glossy Plastic
- OVERRIDE_WHITE_GLOSSY_PLASTIC - Static variable in class nxopen.display.TrueShadingBuilder.MaterialType
-
White Glossy Plastic
- OVERRIDE_YELLOW_GLOSSY_PLASTIC - Static variable in class nxopen.display.TrueShadingBuilder.MaterialType
-
Yellow Glossy Plastic
- overrideAttributeValue(String, double) - Method in interface nxopen.cam.fbm.Feature
-
Overrides the attribute value
License requirements: cam_base ("CAM BASE")
.
- overrideAttributeValue(String, int) - Method in interface nxopen.cam.fbm.Feature
-
Overrides the attribute value
License requirements: cam_base ("CAM BASE")
.
- overrideAttributeValue(String, boolean) - Method in interface nxopen.cam.fbm.Feature
-
Overrides the attribute value
License requirements: cam_base ("CAM BASE")
.
- overrideAttributeValue(String, String) - Method in interface nxopen.cam.fbm.Feature
-
Overrides the attribute value
License requirements: cam_base ("CAM BASE")
.
- overrideAttributeValue(String, Point3d) - Method in interface nxopen.cam.fbm.Feature
-
Overrides the attribute value
License requirements: cam_base ("CAM BASE")
.
- overrideAttributeValue(String, Vector3d) - Method in interface nxopen.cam.fbm.Feature
-
Overrides the attribute value
License requirements: cam_base ("CAM BASE")
.
- OverrideBuilder - Interface in nxopen.validate
-
- OverrideBuilder.DecisionActions - Class in nxopen.validate
-
Represents the override request decision action
- OverrideBuilder.RequestTypes - Class in nxopen.validate
-
Represents the override request type
- OverrideBuilder.ToStates - Class in nxopen.validate
-
Represents the override request to state
- overrideColor() - Method in interface nxopen.assemblies.ProductOutlineBuilder
-
Returns the flag to override-color switch.
- overrideContent(String) - Method in interface nxopen.cae.LayoutStateDataReference
-
Overrides the content of the data reference with the specified string
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- overrideDimensionText() - Method in interface nxopen.annotations.DimensionStyleBuilder
-
Returns the override dimension text
License requirements: None.
- overrideExistingExpressions() - Method in interface nxopen.features.vehicledesign.BaseDataImportExportBuilder
-
Returns the value which indicates whether to override existing expressions in the work part when importing.
- overrideFolder() - Method in interface nxopen.pdm.ConfigurationContextBuilder
-
Returns the override folder
License requirements: None.
- overrideHiddenWireframeColor() - Method in interface nxopen.drawings.ShadingViewStyle
-
Returns the hidden wireframe override color.
- overrideHiddenWireframeColor() - Method in interface nxopen.preferences.ShadingViewPreferences
-
Returns the hidden wireframe override color.
- overrideMaterial() - Method in interface nxopen.cae.DurabilityEventOverridesBuilder
-
Returns the override material.
- overrideOptionValue() - Method in interface nxopen.routing.DesignRuleViolationViewer
-
Returns the value for design Rule Violation override option
if Yes: violation is overridden
if No: violation is not overridden
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- overrideRotation(boolean) - Method in interface nxopen.routing.PathStockBuilder
-
Set the rotation value overwritten flag
License requirements: routing_base ("Routing Basic")
.
- OVERRIDES_ONLY - Static variable in class nxopen.routing.DesignRuleViolationViewer.FilterOption
-
will show only overridden violations
- overrideToolSet() - Method in interface nxopen.features.sheetmetal.BendOptions
-
Returns the override tool set toggle value.
- overrideValidity(PortConnection.OverriddenValidity) - Method in interface nxopen.routing.PortConnection
-
Overrides the validity of the port connection.
- overrideVisibleThreadColor() - Method in interface nxopen.drawings.ThreadsViewStyle
-
Returns the visible thread override color.
- overrideVisibleThreadColor() - Method in interface nxopen.drawings.ViewStyleThreadsBuilder
-
Returns the override thread color on the THREADS tab of the View Style Dialog
License requirements: None.
- overrideVisibleThreadColor() - Method in interface nxopen.preferences.ThreadsViewPreferences
-
Returns the visible thread override color.
- overrideVisibleWireframeColor() - Method in interface nxopen.drawings.ShadingViewStyle
-
Returns the visible wireframe override color.
- overrideVisibleWireframeColor() - Method in interface nxopen.preferences.ShadingViewPreferences
-
Returns the visible wireframe override color.
- overrideWithSmoothConnections() - Method in interface nxopen.cam.NcmSmoothingBuilder
-
Returns the override with smooth connections check activation
License requirements: None.
- oversizeToolPercentBuilder() - Method in interface nxopen.cam.HoleMakingBuilder
-
Returns the oversize tool percent builder (inheritable double)
License requirements: None.
- OVERSTOCK - Static variable in class nxopen.formboard.UpdateDiscrepancy.ObjectType
-
Overstock.
- OVERSTOCK - Static variable in class nxopen.mechanicalrouting.PathStockPreferenceBuilder.AssignStockType
-
Overstock stock type.
- Overstock - Interface in nxopen.routing
-
- OVERSTOCK - Static variable in class nxopen.routing.PathStockBuilder.AssignStockType
-
Overstock stock type.
- OVERSTOCK - Static variable in class nxopen.routing.RouteManager.PartType
-
- OverstockApplication - Interface in nxopen.routing
-
- OverstockApplicationCollection - Interface in nxopen.routing
-
- overstockApplications() - Method in interface nxopen.routing.RouteManager
-
OverstockApplication collection .
- OverstockBuilder - Interface in nxopen.routing
-
Builder for creating/editing overstocks.
- OverstockBuilder.ApplicationType - Class in nxopen.routing
-
The overstock application type.
- OverstockBuilder.PointType - Class in nxopen.routing
-
The defining point location.
- OverstockBuilder.WrapType - Class in nxopen.routing
-
The application type for wrapped overstock
- OverstockFacesBuilder - Interface in nxopen.routing
-
Builder for qualifying faces for overstock application over fittings.
- overstockLengthIncrement() - Method in interface nxopen.formboard.LayoutLengthOptions
-
Returns the overstock length increment.
- overstockRoundingMethod() - Method in interface nxopen.formboard.LayoutLengthOptions
-
Returns the rounding method to apply to overstock wrapped lengths.
- overstockSettings() - Method in interface nxopen.routing.FittingOverstockBuilder
-
Returns the stock settings for overstock assignment.
- overtravel() - Method in interface nxopen.cam.ProbeControlParametersBuilder
-
Returns the probe overtravel distance
License requirements: None.
- OVERWRITE - Static variable in class nxopen.cae.AfuMathOperation.OutputType
-
Overwrites the source AFU Data Record
- OVERWRITE - Static variable in class nxopen.pdm.PartOperationImportBuilder.ExistingPartAction
-
- OVERWRITE - Static variable in class nxopen.PrintPDFBuilder.ActionOption
-
Overwrite existing PDF document
- OVERWRITE - Static variable in class nxopen.uf.UFClone.Action
-
- OVERWRITE_BORDER - Static variable in class nxopen.annotations.TableCellStyleBuilder.FitMethodType
-
- OVERWRITE_EXISTING - Static variable in class nxopen.CGMBuilder.ActionOption
-
Overwrites an existing dataset in Teamcenter
- overwriteCollectors() - Method in interface nxopen.cae.LaminateImportZonesBuilder
-
Returns the mesh collectors overwrite option
License requirements: None.
- overwriteExistingFile() - Method in interface nxopen.display.DecalBuilder
-
Returns the overwrite existing file option - true to overwrite and return no error, false to return error
License requirements: None.
- overwriteLamProps() - Method in interface nxopen.cae.LaminateImportZonesBuilder
-
Returns the laminate properties overwrite option
License requirements: None.
- overwriteMaterials() - Method in interface nxopen.cae.LaminateImportedLayupBuilder
-
Returns the material import overwrite option
License requirements: None.
- overwriteMaterials() - Method in interface nxopen.cae.LaminateImportZonesBuilder
-
Returns the material import overwrite option
License requirements: None.
- ovt() - Method in interface nxopen.drawings.ViewStyleOrientationBuilder
-
Returns the view orientation definition on the ORIENTATION tab of the View Style Dialog
License requirements: None.
- OvtBuilder - Interface in nxopen.drawings
-
- ownedBySystem - Variable in class nxopen.NXObject.AttributeInformation
-
This attribute is a reserved system attribute.
- owner() - Method in interface nxopen.assemblies.Arrangement
-
Returns the
ComponentAssembly
which owns this arrangement
License requirements: None.
- owner() - Method in interface nxopen.cae.AfuHeaderId
-
Returns the owner of AFU Header Id
License requirements: None.
- owner() - Method in interface nxopen.cae.xyplot.IDisplayStyle
-
Returns the owner style
License requirements: None.
- owner() - Method in interface nxopen.diagramming.SheetElementBuilder
-
Returns the owning sheet element.
- owner() - Method in interface nxopen.layout2d.NewComponentBuilder
-
Returns the owner to create the 2D Component, can be either a drawing sheet, a drawing view
a sketch or a 2D Component
License requirements: None.
- ownerparts - Variable in class nxopen.mechatronics.PlcSimAdvClientBuilder.InstanceNamesData
-
- ownerparts - Variable in class nxopen.mechatronics.TCPClientBuilder.ConnectionNamesData
-
- ownerparts - Variable in class nxopen.mechatronics.UDPSignalClientBuilder.ConnectionNamesData
-
- OWNING - Static variable in class nxopen.userdefinedobjects.UserDefinedObject.LinkType
-
The object is owned by the UDO
- owningAction() - Method in interface nxopen.cae.qualityaudit.Result
-
Returns the owning action that provides this result
License requirements: None.
- owningCollaborativeDesign() - Method in interface nxopen.pdm.ModelElement
-
- owningCollaborativeDesign() - Method in interface nxopen.pdm.ModelElementRevision
-
- owningComponent() - Method in interface nxopen.INXObject
-
Returns the owning component, if this object is an occurrence.
- owningFace() - Method in interface nxopen.ConvergentFacet
-
Returns the owning face of convergent facet.
- owningFacetedBody() - Method in interface nxopen.NxFacet
-
Returns the owning nx facet body of the facet.
- owningGroupsP - Variable in class nxopen.uf.UFGroup.AskAllOwningGroupsData
-
- owningHarness - Variable in class nxopen.routing.RouteManager.SearchCriteria
-
Optional.
- owningObject() - Method in interface nxopen.GroupBuilder
-
Returns the owning object ie sketch object which currently has to be a sketch
License requirements: None.
- owningPart() - Method in interface nxopen.INXObject
-
Returns the owning part of this object
License requirements: None.
- owningPartName - Variable in class nxopen.uf.UFWave.LinkedFeatureInfo
-
- owningPositioningTask() - Method in interface nxopen.assemblies.PositioningGroupBuilder
-
Returns the owning positioning task.
- owningRun() - Method in interface nxopen.pid.PipeBuilder
-
Returns the owning run of the pipe.
- owningSheet() - Method in interface nxopen.diagramming.SheetElementBuilder
-
Returns the owning sheet.
- owningSheet() - Method in interface nxopen.pid.EquipmentBuilder
-
Returns the owning sheet of this sheet element.
- owningSheet() - Method in interface nxopen.pid.OffSheetConnectorBuilder
-
Returns the owning sheet of this sheet element.
- owningSheet() - Method in interface nxopen.pid.PipeBuilder
-
Returns the owning sheet of this pipe.
- owningSheet() - Method in interface nxopen.pid.PortEquipmentBuilder
-
Returns the owning sheet of this sheet element.
- owningSubset() - Method in interface nxopen.assemblies.PositioningTaskBuilder
-
Returns the owning subset.
- owningSubsetInstance() - Method in interface nxopen.assemblies.DesignElementBuilder
-
Returns the owning subset instance
License requirements: None.
- oycog - Variable in class nxopen.cae.aerostructures.author.ABB.EquivalentSectionPropertiesData
-
Center of gravity of the equivalent section in Y direction