E-Index (NXOpen Java API Reference)

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z _

E

E - Static variable in class nxopen.ame.InterruptionPointBuilder.Variant
e() - Method in interface nxopen.annotations.DraftingSurfaceFinishBuilder: Returns the e
License requirements: None.
e() - Method in interface nxopen.annotations.SurfaceFinishBuilder: Returns the e
License requirements: None.
e - Variable in class nxopen.cae.aerostructures.author.ABB.EquivalentSectionPropertiesData: Young's modulus of the equivalent section
E - Static variable in class nxopen.cae.DurabilityDamageEvaluationBuilder.BwiWeldClassEnum: E
E - Static variable in class nxopen.cae.DurabilityEventFatigueSettingsBuilder.BwiWeldClassEnum: E
E - Static variable in class nxopen.cae.responsesimulation.DataLocation.Beam
E - Static variable in class nxopen.cae.responsesimulation.ElementalFunctionEvalBeamLocation
E - Static variable in class nxopen.cae.responsesimulation.NodalFunctionEvalBeamLocation: Stress Recovery point E on a beam cross section
E - Static variable in class nxopen.cam.TurnToolBuilder.HolderStyles: E-Style
E - Static variable in class nxopen.drawings.DrawingSheet.StandardSheetSize: 34 X 44 inches
e - Variable in class nxopen.routing.BendReportManager.Mil98Report: The turn angle, this is the angle about the Y axis, relative to initial position (cumulation of the B value in YBC).
E1D - Static variable in class nxopen.cae.connections.ElementType: 1D
E1DSPIDER - Static variable in class nxopen.cae.connections.ElementType: 1D + Spider
E20 - Static variable in class nxopen.cam.TurnToolBuilder.ReliefAngleTypes: Relief angle type: E (20)
EAD - Static variable in class nxopen.cae.connections.ModelizationPPTRefTargetType: Element Associated Data
eAreaType - Variable in class nxopen.mechatronics.PlcSimAdvClientBuilder.TagInfo: Area type
EARTH - Static variable in class nxopen.annotations.AreaFillMaterial: Earth
EARTH - Static variable in class nxopen.uf.UFDrf.AreaFillMaterial
EARTH - Static variable in class nxopen.uf.UFDrf.ValidMaterial
EARTH_VIEW_FACTOR - Static variable in class nxopen.cae.Result.Quantity
eassignment - Variable in class nxopen.mechatronics.ParameterStockBuilder.ListParameterData
EASY_MEASUREMENT_PATTERN - Static variable in class nxopen.weld.WeldObjectBuilder.CommandName: Easy Measurement Pattern command
EASY_SPOT - Static variable in class nxopen.weld.WeldObjectBuilder.CommandName: Easy Spot command
EasyPatternBuilder - Interface in nxopen.weld: Represents the easy pattern builder.
EasyPatternBuilder.HemMethodTypes - Class in nxopen.weld: Indicates the method to use to compute the hem vector location.
EasyPatternBuilder.PlaneMethodTypes - Class in nxopen.weld: The plane to cut sections in to determine placement measurement patterns.
EasyPatternBuilder.SpacingMethodTypes - Class in nxopen.weld: Indicates whether planes should be cut a grid lines, or if a single plane should be used.
EasyPatternBuilder.Types - Class in nxopen.weld: Controls the type of pattern.
EATH - Static variable in class nxopen.cam.SimulationOptionsBuilder.Stationary: use earth stationary
EBUSHING - Static variable in class nxopen.cae.connections.ElementType: Bushing Elm
EC - Static variable in class nxopen.cae.connections.ModelizationPPTRefTargetType: Element collector
ECAD - Static variable in class nxopen.mechatronics.SystemObject.RelationType: ECAD relation type
ECADExportBuilder - Interface in nxopen.mechatronics: Represents a ECADExportBuilder
To create a new instance of this class, use PhysicsManager.createECADExportBuilder()

Created in NX8.5.0
ECADExportBuilder.ExportFileType - Class in nxopen.mechatronics: Deprecated.
Deprecated in NX9.0.0. This enum type has no replacement. It is no longer supported.
ECADImportBuilder - Interface in nxopen.mechatronics: Represents a ECADImportBuilder
To create a new instance of this class, use PhysicsManager.createECADImportBuilder()

Created in NX8.5.0
ECADImportBuilder.PositionMode - Class in nxopen.mechatronics: Deprecated.
Deprecated in NX9.0.0. This enum type has no replacement. It is no longer supported.
ecadProjectId() - Method in interface nxopen.mechatronics.ComparisonResultContext: Returns the ECAD project ID from the comparison context
License requirements: None.
ecadValue() - Method in interface nxopen.mechatronics.ComparisonResultAttribute: Returns the value of imported ECAD device object
License requirements: None.
ECC - Static variable in class nxopen.cae.connections.ModelizationPPTRefTargetType: Element collector container
eccAuto() - Method in interface nxopen.cae.MappedMeshBuilder: Returns the ECC automatic mode option
License requirements: None.
Eccentric - Class in nxopen.routing: Option to query if an existing ISegment is a eccentric segment.
ECCENTRIC_SEG - Static variable in class nxopen.routing.Eccentric: Is a eccentric segment
eccName() - Method in interface nxopen.cae.MappedMeshBuilder: Returns the ECC name
License requirements: None.
eccName() - Method in interface nxopen.cae.ReassignElementsBuilder: Returns the ECC name
License requirements: None.
ece14Isofix() - Method in interface nxopen.features.vehicledesign.SeatBeltAnchorageBuilder: Shows an illustration picture for standard ECER14 ISOFIX
License requirements: nx_general_packaging ("NX General Packaging")
.
ECE14ISOFIX - Static variable in class nxopen.features.vehicledesign.SeatBeltAnchorageBuilder.StandardTypes: ECER14 ISOFIX
ece14SafeIllu() - Method in interface nxopen.features.vehicledesign.SeatBeltAnchorageBuilder: Shows an illustration picture for standard ECER14 safety belt anchorage
License requirements: nx_general_packaging ("NX General Packaging")
.
ECE14SAFETY_BELT_ANCHORAGE - Static variable in class nxopen.features.vehicledesign.SeatBeltAnchorageBuilder.StandardTypes: ECER14 Safty Belt
ECLASS - Static variable in class nxopen.ame.AmeDebugSession.NavigatorType: eCl@ss Navigator
EClassClassNode - Interface in nxopen.ame: EClassData Tree Node class
This object does not need a creator.
EClassDataRoot - Interface in nxopen.ame: EClassData Root Node class
This object does not need a creator.
EClassFolderNode - Interface in nxopen.ame: EClass Folder Node class
This object does not need a creator.
EClassNode - Interface in nxopen.ame: EClassData Tree Node class
This object does not need a creator.
EClassObjectNode - Interface in nxopen.ame: EClassData Tree Node class
This object does not need a creator.
EClassSegmentNode - Interface in nxopen.ame: EClass Segment Node class
This object does not need a creator.
EClassVersionNode - Interface in nxopen.ame: EClass Version Node class
This object does not need a creator.
EDAMPER - Static variable in class nxopen.cae.connections.ElementType: Damper Elm
eDataType - Variable in class nxopen.mechatronics.ExpressionBlockBuilder.Slot: Data type
eDataType - Variable in class nxopen.mechatronics.MATLABClientBuilder.TagInfo: Data type
eDataType - Variable in class nxopen.mechatronics.OPCClientBuilder.TagInfo: Data type
eDataType - Variable in class nxopen.mechatronics.OPCUAClientBuilder.TagInfo: Data type
eDataType - Variable in class nxopen.mechatronics.PlcSimAdvClientBuilder.TagInfo: Data type
eDataType - Variable in class nxopen.mechatronics.ProfinetClientBuilder.TagInfo: Signal Data Type
eDataType - Variable in class nxopen.mechatronics.SHMSignalClientBuilder.SHMSignal: Signal dataType
eDataType - Variable in class nxopen.mechatronics.SignalBuilder.Signal: Data type
eDataType - Variable in class nxopen.mechatronics.SymbolTableBuilder.Symbol: Data type
eDataType - Variable in class nxopen.mechatronics.TCPClientBuilder.Signal: Signal Data type
eDataType - Variable in class nxopen.mechatronics.UDPSignalClientBuilder.Signal: Data type
EDGE - Static variable in class nxopen.annotations.LineWeldDataBuilder.WeldSymbolType
EDGE - Static variable in class nxopen.annotations.Symbol: Specifies edge weld symbol
EDGE - Static variable in class nxopen.cae.AttachElementsBuilder.SplitLineOption: split by edge/curve
EDGE - Static variable in class nxopen.cae.BoltBuilder.Selection: Allows edge selection for head/nut/junction
EDGE - Static variable in class nxopen.cae.CaeGroupElementSubType: sub type is element edge
edge() - Method in interface nxopen.cae.ElementExtrudeBuilder: Returns the edge when extrude along path
License requirements: None.
edge() - Method in interface nxopen.cae.MeshPointMultipleOnCurveBuilder: Returns the node
License requirements: None.
edge() - Method in interface nxopen.cae.NodesOnCurveBuilder: Deprecated.
Deprecated in NX8.5.0. Use NodesOnCurveBuilder.geom() instead.
EDGE - Static variable in class nxopen.cae.optimization.Geometry: Edge
EDGE - Static variable in class nxopen.cae.PostGraphBuilder.EntityType
EDGE - Static variable in class nxopen.cae.WeldBuilder.WeldLocation: Creates a weld at locations on an edge
Edge - Interface in nxopen: Represents an edge
An edge is obtained from its parent Body

Created in NX3.0.0
edge - Variable in class nxopen.FaceMergedRibFacesRule.Data: Edge which creates this rule
edge - Variable in class nxopen.FaceMergedRibFacesRule.DefiningData: Edge which creates this rule
EDGE - Static variable in class nxopen.features.DraftBuilder.Type: From Edges type
edge - Variable in class nxopen.features.EdgeBlendBuilder.StopshortData: Edge the stop short data is on.
EDGE - Static variable in class nxopen.features.ExtensionBuilder.Types
edge() - Method in interface nxopen.features.sheetmetal.FlangeBuilder: Returns the edge on which the flange is created.
EDGE - Static variable in class nxopen.features.sheetmetal.FlatSolidBuilder.OrientationType: transform flat solid body as per orientation defined by edge
EDGE - Static variable in class nxopen.features.shipdesign.ManufacturingStockBuilder.ObjectType: Edge
EDGE - Static variable in class nxopen.features.StepBuilder.ReferenceBoundaryTypes: Select edges as reference boundary object
EDGE - Static variable in class nxopen.features.subdivision.TransformCageData.MovementMethodType: Movement along an edge
EDGE - Static variable in class nxopen.features.UnsewBuilder.UnsewTool: selected edges to split faces
Edge() - Constructor for class nxopen.geometricanalysis.GeometricProperties.Edge
Edge(double, double, Point3d, Point3d, Vector3d, Vector3d, Vector3d, Vector3d, Vector3d, Vector3d, double, double) - Constructor for class nxopen.geometricanalysis.GeometricProperties.Edge: Constructor for the Edge object.
edge - Variable in class nxopen.geometricanalysis.GeometricProperties.EdgePropertiesData: Edge/Curve Properties
EDGE - Static variable in class nxopen.geometricanalysis.GeometricProperties.Entity: Either a modeling edge or a curve.
EDGE - Static variable in class nxopen.geometricutilities.FacePlaneSelectionBuilder.TrimObjectType: edge limit cap
EDGE - Static variable in class nxopen.uf.UFConstants
edge - Variable in class nxopen.uf.UFModl.BlendEdge
edge - Variable in class nxopen.uf.UFModl.EdgeBlendSetbackData
edge - Variable in class nxopen.uf.UFModl.EdgeBlendStopshortData
edge - Variable in class nxopen.uf.UFView.LightAttributes
Edge.EdgeType - Class in nxopen: Solid edge type.
Edge.VerticesData - Class in nxopen: This class holds the data returned from Edge.getVertices()
edge1 - Variable in class nxopen.uf.UFModl.SmholeData
edge1 - Variable in class nxopen.uf.UFModl.SmslotData
edge1() - Method in interface nxopen.weld.PlugSlotBuilder: Returns the edge of the hole or slot on face1
License requirements: None.
edge1Pnt - Variable in class nxopen.uf.UFModl.DevchkEeInfo
EDGE2 - Static variable in class nxopen.annotations.LineWeldDataBuilder.WeldSymbolType
EDGE2 - Static variable in class nxopen.annotations.Symbol: Specifies edge2 weld symbol
edge2 - Variable in class nxopen.uf.UFModl.SmholeData
edge2 - Variable in class nxopen.uf.UFModl.SmslotData
edge2Pnt - Variable in class nxopen.uf.UFModl.DevchkEeInfo
EDGE_ANGLE_END - Static variable in class nxopen.die.QuickBinderBuilder.EditTypes: Change the angle of the end edge of a planar face.
EDGE_ANGLE_OFFSET - Static variable in class nxopen.features.LabelChamferBuilder.ChamferType
EDGE_ANGLE_START - Static variable in class nxopen.die.QuickBinderBuilder.EditTypes: Change the angle of the start edge of a planar face.
EDGE_BLEND_FEATURE - Static variable in class nxopen.uf.UFGdt.FeatureType
EDGE_BODY - Static variable in class nxopen.SelectionIntentRule.RuleType: See documentation for EdgeBodyRule for more details
EDGE_BOUNDARY - Static variable in class nxopen.SelectionIntentRule.RuleType: See documentation for EdgeBoundaryRule for more details
EDGE_CHAIN - Static variable in class nxopen.SelectionIntentRule.RuleType: See documentation for EdgeChainRule for more details
EDGE_CURVE - Static variable in class nxopen.cae.MorphRevolvedMeshBuilder.CurveType: edge or curve
EDGE_DENSITY_CHORDAL - Static variable in class nxopen.cae.MeshControlBuilder.Types
EDGE_DENSITY_NUMBER - Static variable in class nxopen.cae.MeshControlBuilder.Types
EDGE_DENSITY_NUMBER - Static variable in class nxopen.uf.UFSf.EdgeDensityType
EDGE_DENSITY_PROGRESSION - Static variable in class nxopen.cae.MeshControlBuilder.Types: MeshControlBuilder.ProgressionTypes
EDGE_DENSITY_SIZE - Static variable in class nxopen.cae.MeshControlBuilder.Types: MeshControlBuilder.SizeTypes
EDGE_DENSITY_SIZE - Static variable in class nxopen.uf.UFSf.EdgeDensityType
EDGE_DENSITY_SMART - Static variable in class nxopen.uf.UFSf.EdgeDensityType
EDGE_DUMB - Static variable in class nxopen.SelectionIntentRule.RuleType: See documentation for EdgeDumbRule for more details
EDGE_EXTEND - Static variable in class nxopen.die.QuickBinderBuilder.EditTypes: Extend edge of a face.
EDGE_EXTEND_END - Static variable in class nxopen.die.QuickBinderBuilder.EditTypes: Extend end edge of a planar face.
EDGE_EXTEND_START - Static variable in class nxopen.die.QuickBinderBuilder.EditTypes: Extend start edge of a planar face.
EDGE_EXTRA_SOFT - Static variable in class nxopen.uf.UFView.LightEdge
EDGE_FACE - Static variable in class nxopen.SelectionIntentRule.RuleType: See documentation for EdgeFaceRule for more details
EDGE_FACE_IMPRINT - Static variable in class nxopen.cae.ImprintBuilder.ImprintTypes: Edge-Face Imprint
EDGE_FEATURE - Static variable in class nxopen.SelectionIntentRule.RuleType: See documentation for EdgeFeatureRule for more details
EDGE_FINISH - Static variable in class nxopen.cam.SurfaceContourBuilder.DriveMethodTypes: Edge Finish
EDGE_HARD - Static variable in class nxopen.uf.UFView.LightEdge
EDGE_HIDING_EDGE_OFF - Static variable in class nxopen.uf.UFDraw.EdgeHidingEdge
EDGE_HIDING_EDGE_ON - Static variable in class nxopen.uf.UFDraw.EdgeHidingEdge
EDGE_INTERSECT - Static variable in class nxopen.SelectionIntentRule.RuleType: See documentation for EdgeIntersectRule for more details
EDGE_MULTIPLE_SEED_TANGENT - Static variable in class nxopen.SelectionIntentRule.RuleType: See documentation for EdgeMultipleSeedTangentRule for more details
EDGE_NA_TYPE - Static variable in class nxopen.uf.UFWeld.Types
EDGE_OFFSET - Static variable in class nxopen.features.LabelChamferBuilder.ChamferType
EDGE_POINT - Static variable in class nxopen.cam.CamInspectionOperationFeaturetypes: Edge Point
EDGE_POINT_INCLUDED_ANGLE - Static variable in class nxopen.cae.modelcheck.TestValueTypes.TestType
EDGE_POINT_LENGTH_RATIO - Static variable in class nxopen.cae.modelcheck.TestValueTypes.TestType
EDGE_PT - Static variable in class nxopen.cam.InspectionMethodBuilder.MethodTypes: Edge Point
EDGE_REINFORCEMENT - Static variable in class nxopen.features.shipdesign.StiffenerBuilder.Types: Edge Reinforcement type
EDGE_REINFORCEMENT_DIVIDE - Static variable in class nxopen.features.shipdesign.ShipPreparationInfo.Types: The data represents a edge reinforcement divide feature.
EDGE_REINFORCEMENT_EDGES - Static variable in class nxopen.features.shipdesign.ShipPreparationInfo.Types: The data represents a edge reinforcement divide feature.
EDGE_REINFORCEMENT_SYSTEM - Static variable in class nxopen.features.shipdesign.ShipDesignPreferencesBuilder.Types: Edge Reinforcement System type
EDGE_REINFORCEMENT_SYSTEM - Static variable in class nxopen.features.shipdesign.ShipnamesBuilderType
EDGE_SELECT_ALWAYS - Static variable in class nxopen.uf.UFGdt.EdgeSelectType
EDGE_SELECT_OFF - Static variable in class nxopen.uf.UFGdt.EdgeSelectType
EDGE_SELECT_ON - Static variable in class nxopen.uf.UFGdt.EdgeSelectType
EDGE_SHEET_BOUNDARY - Static variable in class nxopen.SelectionIntentRule.RuleType: See documentation for EdgeSheetBoundaryRule for more details
EDGE_SMOOTHNESS - Static variable in class nxopen.geometricanalysis.ExamineGeometry.Check: EdgeSmoothness
EDGE_SOFT - Static variable in class nxopen.uf.UFView.LightEdge
EDGE_TANGENT - Static variable in class nxopen.SelectionIntentRule.RuleType: See documentation for EdgeTangentRule for more details
EDGE_TO_EDGE - Static variable in class nxopen.cae.CAEConnectionBuilder.ConnectionTypeEnum: between edges
EDGE_TO_EDGE - Static variable in class nxopen.geometricanalysis.DeviationChecking.Types: check edge to edge deviation
EDGE_TO_EDGE - Static variable in class nxopen.geometricanalysis.SurfaceContinuityAnalysisBuilder.Types
EDGE_TO_EDGES - Static variable in class nxopen.cae.EdgeSticherBuilder.StitchOptions
EDGE_TO_FACE - Static variable in class nxopen.cae.CAEConnectionBuilder.ConnectionTypeEnum: between edges and faces
EDGE_TO_FACE - Static variable in class nxopen.geometricanalysis.DeviationChecking.Types: check edge to face deviation
EDGE_TO_FACE - Static variable in class nxopen.geometricanalysis.SurfaceContinuityAnalysisBuilder.Types
EDGE_TO_FACES - Static variable in class nxopen.cae.EdgeSticherBuilder.StitchOptions
EDGE_TOLERANCES - Static variable in class nxopen.geometricanalysis.ExamineGeometry.Check: EdgeTolerances
EDGE_TOPO - Static variable in class nxopen.uf.UFBrep.TopoType
EDGE_TYPE - Static variable in class nxopen.uf.UFWeld.Types
EDGE_ULTRA_SOFT - Static variable in class nxopen.uf.UFView.LightEdge
EDGE_VERTEX - Static variable in class nxopen.SelectionIntentRule.RuleType: See documentation for EdgeVertexRule for more details
EDGE_VERTEX_TANGENT - Static variable in class nxopen.SelectionIntentRule.RuleType: See documentation for EdgeVertexTangentRule for more details
EDGE_WELD - Static variable in class nxopen.uf.UFConstants
EDGE_WELD_NON_ASSOCIATIVE - Static variable in class nxopen.uf.UFConstants
edgeAngle() - Method in interface nxopen.cae.MergeFaceBuilder: Returns the edge angle criterion is used to merge faces at an angle
License requirements: None.
edgeAngle - Variable in class nxopen.uf.UFSf.Ugs2dMeshParms
edgeAngle - Variable in class nxopen.uf.UFSf.UgsMeshAbstractionParams
edgeAngle - Variable in class nxopen.uf.UFSf.UgsTetMeshParms
edgeArray - Variable in class nxopen.features.EdgeBlendBuilder.SetbackData: Array of Edge collector tags that are used by the setback
edgeAskAdjacentEdges(Tag) - Method in interface nxopen.uf.UFSf: Refer to UF_SF_edge_ask_adjacent_edges for documentation.
EdgeAskAdjacentEdgesData() - Constructor for class nxopen.uf.UFSf.EdgeAskAdjacentEdgesData
edgeAskBody(Tag) - Method in interface nxopen.uf.UFSf: Refer to UF_SF_edge_ask_body for documentation.
edgeAskBoundingBox(Tag) - Method in interface nxopen.uf.UFSf: Refer to UF_SF_edge_ask_bounding_box for documentation.
edgeAskEndPoints(Tag) - Method in interface nxopen.uf.UFSf: Refer to UF_SF_edge_ask_end_points for documentation.
EdgeAskEndPointsData() - Constructor for class nxopen.uf.UFSf.EdgeAskEndPointsData
edgeAskFaces(Tag) - Method in interface nxopen.uf.UFSf: Refer to UF_SF_edge_ask_faces for documentation.
EdgeAskFacesData() - Constructor for class nxopen.uf.UFSf.EdgeAskFacesData
edgeAskLength(Tag) - Method in interface nxopen.uf.UFSf: Refer to UF_SF_edge_ask_length for documentation.
edgeBcurves - Variable in class nxopen.uf.UFModlGeneral.Ask2dtrimBsurfData
EdgeBlend - Interface in nxopen.features: Represents an Edge Blend feature
To create or edit an instance of this class, use EdgeBlendBuilder

Created in NX5.0.0
EdgeBlendBuilder - Interface in nxopen.features: Represents a Edge Blend builder.
EdgeBlendBuilder.ChainsetAndSectionValueData - Class in nxopen.features: This class holds the data returned from EdgeBlendBuilder.getChainsetAndSectionValue(int)
EdgeBlendBuilder.ChainsetAndStatusData - Class in nxopen.features: This class holds the data returned from EdgeBlendBuilder.getChainsetAndStatus(int)
EdgeBlendBuilder.ChainsetData - Class in nxopen.features: This class holds the data returned from EdgeBlendBuilder.getChainset(int)
EdgeBlendBuilder.Conic - Class in nxopen.features: This enum represents the Conic option
EdgeBlendBuilder.FaceContinuity - Class in nxopen.features: The Blend Face Continuity
EdgeBlendBuilder.OrderOfBlending - Class in nxopen.features: This enum represents the order of Blending
EdgeBlendBuilder.Overlap - Class in nxopen.features: This enum represents the Overlap resolution options for Edge Blend
EdgeBlendBuilder.Rhotype - Class in nxopen.features: This enum represents the rho type for conic section blend
EdgeBlendBuilder.Section - Class in nxopen.features: This enum represents the Section option
EdgeBlendBuilder.Setback - Class in nxopen.features: This enum represents the Setback option
EdgeBlendBuilder.SetbackData - Class in nxopen.features: This class holds the data returned from EdgeBlendBuilder.getSetbackData(int)
EdgeBlendBuilder.StopshortData - Class in nxopen.features: This class holds the data returned from EdgeBlendBuilder.getStopshortData(int)
EdgeBlendBuilder.VariableRadiusData - Class in nxopen.features: This class holds the data returned from EdgeBlendBuilder.getVariableRadiusData(nxopen.Edge)
EdgeBlendBuilder.VariableRadiusDataNewData - Class in nxopen.features: This class holds the data returned from EdgeBlendBuilder.getVariableRadiusDataNew(nxopen.Edge)
EdgeBlendData() - Constructor for class nxopen.uf.UFModl.EdgeBlendData
EdgeBlendData(int, boolean, boolean, double, String, boolean, boolean, boolean, int, UFModl.BlendEdge[]) - Constructor for class nxopen.uf.UFModl.EdgeBlendData
EdgeBlendMultData() - Constructor for class nxopen.uf.UFModl.EdgeBlendMultData
EdgeBlendMultData(boolean, double, boolean, boolean, boolean, boolean, boolean, int, UFModl.EdgeBlendSet[], int, Tag[], UFModl.BlendPointData[], int, UFModl.EdgeBlendSetbackData[], int, UFModl.EdgeBlendStopshortData[]) - Constructor for class nxopen.uf.UFModl.EdgeBlendMultData
EdgeBlendSet() - Constructor for class nxopen.uf.UFModl.EdgeBlendSet
EdgeBlendSet(Tag, int, Tag[], String, Tag, int) - Constructor for class nxopen.uf.UFModl.EdgeBlendSet
EdgeBlendSetbackData() - Constructor for class nxopen.uf.UFModl.EdgeBlendSetbackData
EdgeBlendSetbackData(Tag, boolean, String, Tag, int) - Constructor for class nxopen.uf.UFModl.EdgeBlendSetbackData
EdgeBlendStopshortData() - Constructor for class nxopen.uf.UFModl.EdgeBlendStopshortData
EdgeBlendStopshortData(Tag, boolean, String, Tag, int) - Constructor for class nxopen.uf.UFModl.EdgeBlendStopshortData
EdgeBodyRule - Interface in nxopen: Represents a SelectionIntentRule that collects all the edges of a body.
EdgeBoundaryRule - Interface in nxopen: Represents a SelectionIntentRule that collects all the edges of a face.
edgeChain() - Method in interface nxopen.features.sheetmetal.ContourFlangeBuilder: Returns the section having chain edges.
edgeChain() - Method in interface nxopen.features.sheetmetal.HemFlangeBuilder: Returns the edge chain
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
edgeChainCollector() - Method in interface nxopen.features.FaceBlendBuilder: Returns the edge chain collector
License requirements: None.
EdgeChainRule - Interface in nxopen: Represents a SelectionIntentRule that collects end-to-end connected edges from the body of the seed edge.
EdgeChainRule.Data - Class in nxopen: This class holds the data returned from EdgeChainRule.getData()
edgeCollection - Variable in class nxopen.uf.UFModlFeatures.AskTaperFromEdges1Data
edgeCollector() - Method in interface nxopen.features.UnsewBuilder: Returns the edge collector
License requirements: None.
edgeCollector() - Method in interface nxopen.geometricutilities.LocalUntrimBuilder: Returns the edges on the face to delete.
edgeCollector - Variable in class nxopen.uf.UFModl.EdgeBlendSet
edgeColor - Variable in class nxopen.cae.Post.EdgeFace
edgeColor - Variable in class nxopen.cae.Post.PrimaryEdgeFace
edgeCount - Variable in class nxopen.uf.UFModlGeneral.Ask2dtrimBsurfData
edgeCounts - Variable in class nxopen.uf.UFModlGeneral.CreateBsEdgesData
edgeCurve() - Method in interface nxopen.cae.AttachElementsBuilder: Returns the curve
License requirements: None.
edgeCurves - Variable in class nxopen.uf.UFModlGeneral.CreateBsEdgesData
edgeCurveSelection() - Method in interface nxopen.cae.EdgeFaceImprintBuilder: Returns the edge/curve selection for projection imprint
License requirements: None.
EdgeCut - Interface in nxopen.features.shipdesign: Represents a edge cut feature
To create or edit an instance of this class, use EdgeCutBuilder

Created in NX8.5.0
EdgeCutBuilder - Interface in nxopen.features.shipdesign: Represents a EdgeCut builder.
EdgeCutBuilder.ArraySpacing - Class in nxopen.features.shipdesign: available methods used to define the spacing between the cuts
EdgeCutBuilder.VersionID - Class in nxopen.features.shipdesign: version identifiers for the different revisions of the edge cut feature.
edgeData - Variable in class nxopen.uf.UFModl.EdgeBlendData
edgeData - Variable in class nxopen.uf.UFModl.EdgeBlendMultData
edgeDefinition() - Method in interface nxopen.cam.BladeEdge: Returns the Edge Definition
License requirements: None.
EdgeDensity - Interface in nxopen.cae: Represents a CAE edge density .
edgeDensity - Variable in class nxopen.uf.UFSf.EfConnInfo
edgeDensity - Variable in class nxopen.uf.UFSf.Sf1dMeshData
EdgeDensityData() - Constructor for class nxopen.uf.UFSf.EdgeDensityData
EdgeDensityData(UFSf.EdgeDensityType, double, int) - Constructor for class nxopen.uf.UFSf.EdgeDensityData
edgeDensitySize() - Method in interface nxopen.cae.MeshControlDisplayOptionsBuilder: Returns the edge density size
License requirements: None.
edgeDisplayOptions - Variable in class nxopen.uf.UFView.AskSurfaceDisplayOptionsData
EdgeDisplayOptions() - Constructor for class nxopen.uf.UFView.EdgeDisplayOptions
EdgeDisplayOptions(int, int, UFView.SmoothEdges, int, int, int, double) - Constructor for class nxopen.uf.UFView.EdgeDisplayOptions
EdgeDisplayStyle() - Constructor for class nxopen.cae.modelcheck.ElementEdgeCheckBuilder.EdgeDisplayStyle
EdgeDisplayStyle(DisplayableObject.ObjectFont, DisplayableObject.ObjectWidth, NXColor) - Constructor for class nxopen.cae.modelcheck.ElementEdgeCheckBuilder.EdgeDisplayStyle: Constructor for the EdgeDisplayStyle object.
edgeDist - Variable in class nxopen.uf.UFModl.DevchkEeInfo
EdgeDumbRule - Interface in nxopen: Represents a SelectionIntentRule that collects edges without any intent i.e. as if collected with Single Curve rule.
edgeEvaluateClosestPoint(Tag, double[]) - Method in interface nxopen.uf.UFSf: Refer to UF_SF_edge_evaluate_closest_point for documentation.
EdgeEvaluateClosestPointData() - Constructor for class nxopen.uf.UFSf.EdgeEvaluateClosestPointData
edgeEvaluateParamLocation(Tag, double) - Method in interface nxopen.uf.UFSf: Refer to UF_SF_edge_evaluate_param_location for documentation.
EdgeFace() - Constructor for class nxopen.cae.Post.EdgeFace
EdgeFace(Post.EdgeStyle, NXColor, Post.FaceStyle, NXColor) - Constructor for class nxopen.cae.Post.EdgeFace: Constructor for the EdgeFace object.
EdgeFaceImprintBuilder - Interface in nxopen.cae: Builder for creating Face Face Imprint
To create a new instance of this class, use AbstractionManager.createEdgeFaceImprintBuilder()

Created in NX11.0.0
EdgeFaceImprintBuilder.ProjectionDirectionType - Class in nxopen.cae: the projection directon type
EdgeFaceRule - Interface in nxopen: Represents a SelectionIntentRule that collects all edges of a face.
EdgeFeatureRule - Interface in nxopen: Represents a SelectionIntentRule that collects all edges created or modified by a feature.
EdgeFinish - Interface in nxopen.cam: Represents a Blade Finish Drive Method Builder .
edgeFinish() - Method in interface nxopen.cam.SurfaceContourBuilder: Returns the Edge Finish Drive Method builder
License requirements: None.
edgeFlowDirection() - Method in interface nxopen.features.BridgeSurfaceBuilder: Returns the flow direction.
edgeFraction() - Method in interface nxopen.cae.MeshControlBuilder: Returns the value stored in edge fraction field.
edgeHidingEdge - Variable in class nxopen.uf.UFDraw.RenderPrefs
edgeHidingEdge - Variable in class nxopen.uf.UFDraw.ViewPrfs
edgeId() - Method in interface nxopen.cae.PostSelectionEntity: Returns the edge id selected
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
edgeId - Variable in class nxopen.uf.UFFacet.FindEdgeInFacetData
edgeIdInAdjacentFacet - Variable in class nxopen.uf.UFFacet.AskAdjacentFacetData
edgeIds - Variable in class nxopen.cae.FEElemEdge.ElementsAndEdgeIdsData
edgeindex - Variable in class nxopen.die.QuickBinderBuilder.EdgesOfFaceData: edge indexes
edgeIndexToEdit() - Method in interface nxopen.die.QuickBinderBuilder: Returns the index of the edge to edit.
edgeIntegralOption() - Method in interface nxopen.cae.ResultProbeBuilder: Returns the face integral option
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
edgeIntegralOptionValue() - Method in interface nxopen.cae.PostGraphBuilder: Returns the weighted average or integral option on selecting Edge
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
EdgeIntersectRule - Interface in nxopen: Represents a SelectionIntentRule that collects all intersection edges between a set of faces.
EdgeIntersectRule.Data - Class in nxopen: This class holds the data returned from EdgeIntersectRule.getData()
edgeLength - Variable in class nxopen.cam.FormEdgesBuilder.Data: the edge length
edgeLength() - Method in interface nxopen.cam.FormEdgesBuilder: Returns the cut edge length value
License requirements: None.
edgeLength() - Method in interface nxopen.facet.MergeFacetBodyBuilder: Returns the edge length to control the size of new facets
License requirements: None.
edgeLength() - Method in interface nxopen.facet.SubdivideFacetBodyBuilder: Returns the value indicating length of the edge of the polygons to be subdivided.
edgeLength() - Method in interface nxopen.features.LatticeBuilder: Returns the edge length of the unit cell bounding box, and effective only when the bounding box is a uniform cube
License requirements: None.
edgelength - Variable in class nxopen.tooling.StockSizeBuilder.CalculateBoxSizeData
edgeLimit() - Method in interface nxopen.features.MatchEdgeBuilder: Returns the edge limit
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
edgeMatchOption() - Method in interface nxopen.cae.MappedMeshBuilder: Returns the edge match toggle
License requirements: None.
edgeMatchToggle - Variable in class nxopen.uf.UFSf.Ugs2dMeshParms
edgeMatchTolerance() - Method in interface nxopen.cae.MappedMeshBuilder: Returns the edge match tolerance
License requirements: None.
edgeMatchTolerance - Variable in class nxopen.uf.UFSf.Ugs2dMeshParms
edgeMerge(CAEVertex[], double, boolean) - Method in interface nxopen.cae.AbstractionManager: Edge Merge
License requirements: nx_masterfem ("Finite Element Modeling")
.
edgeMergeAngle() - Method in interface nxopen.cae.MappedMeshBuilder: Returns the edge merge angle
License requirements: None.
edgeMergeToggle - Variable in class nxopen.uf.UFSf.Ugs2dMeshParms
edgeMergeToggle - Variable in class nxopen.uf.UFSf.UgsMeshAbstractionParams
edgeMergeToggle - Variable in class nxopen.uf.UFSf.UgsTetMeshParms
EdgeMultipleSeedTangentRule - Interface in nxopen: Represents a SelectionIntentRule that collects tangent connected edges from the body of the seed edge.
EdgeMultipleSeedTangentRule.Data - Class in nxopen: This class holds the data returned from EdgeMultipleSeedTangentRule.getData()
edgeOffsetPosition() - Method in interface nxopen.features.MatchEdgeBuilder: Returns the edge offset position
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
EdgePatchBuilder - Interface in nxopen.tooling: Represents a builder to be used to create edge patch surfaces.
EdgePatchBuilder.BodyColorData - Class in nxopen.tooling: This class holds the data returned from EdgePatchBuilder.getBodyColor()
EdgePatchBuilder.PatchStatus - Class in nxopen.tooling: Settings of the patch status types.
EdgePatchBuilder.SelectTypes - Class in nxopen.tooling: Settings of the selection types.
EdgePatchCollection - Interface in nxopen.tooling: Represents a collection of EdgePatch builder
To obtain an instance of this class, refer to ToolingManager

Created in NX6.0.0
edgePatchs() - Method in interface nxopen.tooling.ToolingManager: Returns the EdgePatchCollection instance belonging to this part .
EdgePathMethod - Interface in nxopen.cae: Represents a EdgePathMethod .
EdgePathMethod.PathEdgesData - Class in nxopen.cae: This class holds the data returned from EdgePathMethod.getPathEdges()
EdgePathMethod.SeedEdgesData - Class in nxopen.cae: This class holds the data returned from EdgePathMethod.getSeedEdges()
EdgePathMethod.SeedsData - Class in nxopen.cae: This class holds the data returned from EdgePathMethod.getSeeds()
edgePoint() - Method in interface nxopen.cae.qualityaudit.FreeEdgeDistanceResult: Returns the edge point.
EdgePrep - Interface in nxopen.weld: Represents a Weld Edge Prep feature
To create or edit an instance of this class, use EdgePrepBuilder

Created in NX8.0.0
EdgePrepBuilder - Interface in nxopen.weld: A builder used to create or edit a EdgePrep feature.
EdgePrepValuesBuilder - Interface in nxopen.weld: Used to view or edit the values used to define the welding joint and edge preparation.
EdgePrepValuesBuilder.Apply - Class in nxopen.weld: Option to indicate how the values are to be updated.
EdgePrepValuesBuilder.Option - Class in nxopen.weld: Option to indicate how the values are to be used.
EdgePrepValuesData() - Constructor for class nxopen.weld.JointExitBuilder.EdgePrepValuesData
EdgePropertiesData() - Constructor for class nxopen.geometricanalysis.GeometricProperties.EdgePropertiesData
EdgeReinforcement - Interface in nxopen.features.shipdesign: Represents a edge reinforcement feature.
edgeReinforcementAlignment() - Method in interface nxopen.features.shipdesign.StiffenerBuilder: Returns the edge reinforcement alignment
License requirements: None.
EdgeReinforcementBuilder - Interface in nxopen.features.shipdesign: Represents a EdgeReinforcement builder which is used to create or edit a edge reinforcement system feature.
EdgeReinforcementBuilder.EndCutTypes - Class in nxopen.features.shipdesign: Used to specify the type of end cut to be used at the extreme ends of the edge reinforcement system.
EdgeReinforcementBuilder.OrientationMethods - Class in nxopen.features.shipdesign: Used to specify the type of reference to use for specifying the orientation of the edge reinforcement system.
EdgeReinforcementBuilder.Types - Class in nxopen.features.shipdesign: Used to specify how the edge reinforcement system is defined.
edgeReinforcementPlacementMethod() - Method in interface nxopen.features.shipdesign.StiffenerBuilder: Returns the edge reinforcement placement method
License requirements: None.
EdgeRip - Interface in nxopen.features: Represents an EdgeRip feature
To create or edit an instance of this class, use EdgeRipBuilder

Created in NX5.0.0
EdgeRipBuilder - Interface in nxopen.features.sheetmetal: Represents a Edge Rip feature builder.
EDGES - Static variable in class nxopen.blockstyler.SelectObject.FilterType: Filter to select all edge types
EDGES - Static variable in class nxopen.cae.ResultProbeBuilder.SelectionType
EDGES - Static variable in class nxopen.cam.Preferences.SelectionTypes: edges
EDGES - Static variable in class nxopen.features.DraftBodyBuilder.Types: From Edges
edges() - Method in interface nxopen.features.sheetmetal.AdvancedFlangeBuilder: Returns the base edge for the advanced flange.
edges() - Method in interface nxopen.features.sheetmetal.FlangeBendPropertiesBuilder: Returns the base edge for the flange.
edges() - Method in interface nxopen.features.shipdesign.EdgeReinforcementBuilder: Returns the edges to reinforce.
edges - Variable in class nxopen.preferences.PartVisualizationEmphasis.LayersOptions: whether or not edges are displayed for de-emphasized shaded geometry when the See-Thru style is set to Layers.
edges - Variable in class nxopen.preferences.PartVisualizationEmphasis.OriginalColorShellOptions: whether or not edges are displayed for de-emphasized shaded geometry when the See-Thru style is set to Original Color Shell.
edges - Variable in class nxopen.preferences.PartVisualizationEmphasis.ShellOptions: whether or not edges are displayed for de-emphasized shaded geometry when the See-Thru style is set to Shell.
EDGES - Static variable in class nxopen.Selection.SelectionType: Filter to select all edge types
edges - Variable in class nxopen.uf.UFModeling.AskSplitEdgesData
edges - Variable in class nxopen.uf.UFModl.ComparePartEntitiesData
edges - Variable in class nxopen.uf.UFModl.ComparePartEntitiesData3
edges - Variable in class nxopen.uf.UFModl.EdgeBlendSet
edges - Variable in class nxopen.uf.UFModlFeatures.AskImprEdgesData
edges - Variable in class nxopen.uf.UFModlFeatures.AskTaperFromEdgesData
edges - Variable in class nxopen.uf.UFSf.BodyAskEdgesData
edges - Variable in class nxopen.uf.UFSf.EdgeAskAdjacentEdgesData
edges - Variable in class nxopen.uf.UFSf.FaceAskEdgesData
edges1 - Variable in class nxopen.uf.UFModeling.AskCnncEdgesData
edges2 - Variable in class nxopen.uf.UFModeling.AskCnncEdgesData
EDGES_ALONG_FACES - Static variable in class nxopen.features.ChamferBuilder.OffsetMethod: Offset edges along faces
EDGES_NOT_CONNECTED - Static variable in class nxopen.uf.UFConstants
EDGES_NOT_PREPARED - Static variable in class nxopen.weld.WeldGrooveType: Edges are not prepared
EDGES_PREPARED - Static variable in class nxopen.weld.WeldGrooveType: Edges are prepared
edgeSelect() - Method in interface nxopen.cae.SuppressHoleBuilder: Returns the edgeselect
License requirements: nx_masterfem ("Finite Element Modeling")
.
edgeSelection() - Method in interface nxopen.cae.CircularImprintBuilder: Returns the selected edge/point object(s)
License requirements: None.
edgeSelection() - Method in interface nxopen.cae.FaceFromBoundaryBuilder: Returns the polygon edge selection to create a face from boundary
License requirements: None.
edgeSelection() - Method in interface nxopen.cae.WeldBuilder: Returns the edge(s) used to specify the location of the weld
License requirements: None.
edgesEmphasis() - Method in interface nxopen.preferences.SessionVisualizationShade: Returns the edge emphasis flag.Alters how edges are displayed when Shaded Face Edges is flag is true.
edgeSense - Variable in class nxopen.uf.UFModlGeneral.Ask2dtrimBsurfData
edgeSet1() - Method in interface nxopen.weld.FilletBuilder: Returns the edge set1.
edgeSet1() - Method in interface nxopen.weld.WeldGrooveBuilder: Returns the first edge set
License requirements: ugweld ("UG WELD")
.
edgeSet2() - Method in interface nxopen.weld.FilletBuilder: Returns the edge set2.
edgeSet2() - Method in interface nxopen.weld.WeldGrooveBuilder: Returns the second edge set
License requirements: ugweld ("UG WELD")
.
edgeSetAngleExpressionList() - Method in interface nxopen.features.DraftBuilder: Returns the list of draft edges SC Collectors and corresponding draft angles.
EdgeSheetBoundaryRule - Interface in nxopen: Represents a SelectionIntentRule that collects boundary edges of a sheet body.
edgesHiddenByEdges() - Method in interface nxopen.drawings.HiddenLinesViewStyle: Returns the staus of edges hidden by edges.
edgesHiddenByEdges() - Method in interface nxopen.drawings.ViewStyleHiddenLinesBuilder: Returns the edges hidden by edges toggle on the HIDDEN LINES tab of the View Style Dialog
License requirements: None.
edgesHiddenByEdges() - Method in interface nxopen.preferences.HiddenLinesViewPreferences: Returns the staus of edges hidden by edges.
edgesHiddenByOwnSolid - Variable in class nxopen.uf.UFDraw.RenderPrefs
edgesHiddenByOwnSolid - Variable in class nxopen.uf.UFDraw.ViewPrfs
EdgesOfFaceData() - Constructor for class nxopen.die.QuickBinderBuilder.EdgesOfFaceData
edgesPrepared() - Method in interface nxopen.weld.EdgePrepValuesBuilder: Returns the indication that the edges are prepared for welding
License requirements: None.
edgesRgb - Variable in class nxopen.preferences.PartVisualizationEmphasis.LayersOptions: the color of edges displayed for de-emphasized shaded geometry when the See-Thru style is set to Layers.
edgesRgb - Variable in class nxopen.preferences.PartVisualizationEmphasis.OriginalColorShellOptions: the color of edges displayed for de-emphasized shaded geometry when the See-Thru style is set to Original Color Shell.
edgesRgb - Variable in class nxopen.preferences.PartVisualizationEmphasis.ShellOptions: the color of edges displayed for de-emphasized shaded geometry when the See-Thru style is set to Shell.
EdgeSticherBuilder - Interface in nxopen.cae: Represents a EdgeSticherBuilder
To create a new instance of this class, use FemPart.createEdgeSticherBuilder()
Default values.
EdgeSticherBuilder.StitchMethods - Class in nxopen.cae: Stitch method : NX7.5 onwards
EdgeSticherBuilder.StitchOptions - Class in nxopen.cae: Stitch option for stitch : NX7.5 onwards
EdgeSticherBuilder.Types - Class in nxopen.cae: Type of edge stitch : For Pre-NX7.5
edgesToMoveToDraftedFace() - Method in interface nxopen.features.DraftBodyBuilder: Returns the edges to move to drafted face
License requirements: None.
edgesToProject() - Method in interface nxopen.features.subdivision.StartSymmetricModelingBuilder: Returns the edges to project
License requirements: None.
edgeStyle - Variable in class nxopen.cae.Post.EdgeFace
edgeStyle - Variable in class nxopen.cae.Post.PrimaryEdgeFace
EdgeSymmetry - Interface in nxopen.features: Represents an edge symmetry feature
To create or edit an instance of this class, use EdgeSymmetryBuilder

Created in NX7.0.0
EdgeSymmetryBuilder - Interface in nxopen.features: Represents a EdgeSymmetry builder
To create a new instance of this class, use FeatureCollection.createEdgeSymmetryBuilder(nxopen.features.Feature)
Default values.
EdgeSymmetryBuilder.MovementDirections - Class in nxopen.features: Movement directions
EdgeSymmetryBuilder.MovementMethods - Class in nxopen.features: Matching method options
EdgeSymmetryBuilder.SymmetryPlaneOptions - Class in nxopen.features: Symmetry plane options
edgeTags - Variable in class nxopen.uf.UFModeling.AskBodyBoundariesData
edgeTags - Variable in class nxopen.uf.UFSf.EfConnInfo
edgeTangentMagnitude() - Method in interface nxopen.features.BridgeSurfaceBuilder: Returns the edge tangent magnitude
License requirements: None.
EdgeTangentRule - Interface in nxopen: Represents a SelectionIntentRule that collects tangent connected edges from the body of the seed edge.
EdgeTangentRule.Data - Class in nxopen: This class holds the data returned from EdgeTangentRule.getData()
edgeToBlend() - Method in interface nxopen.features.FlowBlendBuilder: Returns the edge to blend
License requirements: None.
edgeToEdge - Variable in class nxopen.uf.UFModl.SmjoggleData
edgeToEdgeConnectionMethodType() - Method in interface nxopen.cae.CAEConnectionBuilder: Returns the method type for edge-to-edge connection
License requirements: None.
edgeTolerance() - Method in interface nxopen.cae.CAEConnectionBuilder: Returns the option to tune edge tolerance.
edgeTolerance() - Method in interface nxopen.drawings.ViewStyleShadingBuilder: Returns the edge tolerance data on the SHADING tab of the View Style Dialog
License requirements: None.
edgeTolerance() - Method in interface nxopen.geometricutilities.DisplayResolutionBuilder: Returns the edge tolerance
License requirements: None.
edgeTolerance - Variable in class nxopen.preferences.PartVisualizationShade.AdvVisViewFacetTolerancesData
edgeTolerance - Variable in class nxopen.preferences.PartVisualizationShade.ShadedViewFacetTolerancesData
edgeToMove() - Method in interface nxopen.features.MoveEdgeBuilder: Returns the edge collector.
edgeToOffset() - Method in interface nxopen.features.OffsetEdgeBuilder: Returns the edge collector to offset
License requirements: None.
edgeType() - Method in interface nxopen.facet.FacetedEdge: Returns the type of the facet edge
License requirements: None.
edgeType() - Method in interface nxopen.weld.WeldGrooveBuilder: Returns the edge type
License requirements: ugweld ("UG WELD")
.
EdgeVertexRule - Interface in nxopen: Represents a SelectionIntentRule that collects the vertex edge and and its adjacent edges.
EdgeVertexRule.Data - Class in nxopen: This class holds the data returned from EdgeVertexRule.getData()
EdgeVertexTangentRule - Interface in nxopen: Represents a SelectionIntentRule that collects the vertex edge and the edges adjacent and tangent to it.
EdgeVertexTangentRule.Data - Class in nxopen: This class holds the data returned from EdgeVertexTangentRule.getData()
edgeVisibilitySw - Variable in class nxopen.uf.UFSf.MeshVisuals
EDIE_WIZARD - Static variable in class nxopen.tooling.ToolingApplication: Engineering Die Wizard
EDIT - Static variable in class nxopen.assemblies.DesignElementBuilder.OperationType: Edits a design element
EDIT - Static variable in class nxopen.blockstyler.BlockDialog.DialogMode: The Apply button is not shown.
EDIT - Static variable in class nxopen.drawings.DrawingSheetBuilder.SheetMode: edit mode
edit(Expression, String) - Method in interface nxopen.ExpressionCollection: Edits an expression.
EDIT - Static variable in class nxopen.mechatronics.CamBuilder.AddCamDiskToMasterOption: Edit
EDIT - Static variable in class nxopen.preferences.SessionModeling.SketchDefaultActionType: Edit sketch without rollback on double click
EDIT - Static variable in class nxopen.routing.Operation: Edit existing overstock
edit(String, String, NXObject[], NXObject[], NXObject[]) - Method in interface nxopen.routing.Run: Edits an existing run with new items.
edit(String, String, RunItem[], RunItem[], RunItem[]) - Method in interface nxopen.routing.Run: Edits an existing run with new run item data.
EDIT - Static variable in class nxopen.Section.Mode: Feature is being edited
EDIT - Static variable in class nxopen.tooling.AddReusablePart.ModeMethod: Edit reusable component
EDIT - Static variable in class nxopen.tooling.CornerDesignBuilder.Types: Edit operation
EDIT - Static variable in class nxopen.tooling.EWDraftingBuilder.ModeOption: edit drawing
EDIT - Static variable in class nxopen.tooling.FastenerAssy.ModeMethod: Edit fastener assembly
EDIT - Static variable in class nxopen.tooling.InsertAuxiliaryBuilder.CircOperationTypes: edit
EDIT - Static variable in class nxopen.tooling.InsertAuxiliaryBuilder.RectOperationOption: edit
EDIT - Static variable in class nxopen.tooling.ReliefDesignBuilder.Types: Edit operation
EDIT - Static variable in class nxopen.tooling.ScrapDesignBuilder.Body: Edit operation
EDIT - Static variable in class nxopen.tooling.SpecialPiercingInsertBuilder.Types
edit(UFSubdiv.Type, UFSubdiv.DataStructuresUnion, Tag) - Method in interface nxopen.uf.UFSubdiv: Refer to UF_SUBDIV_edit for documentation.
EDIT - Static variable in class nxopen.userdefinedobjects.UserDefinedEvent.Reason: Edit UDO event
EDIT_ASSOCIATE - Static variable in class nxopen.features.shipdesign.PenetrationRequestBuilder.RequestDialogType
EDIT_BLANK - Static variable in class nxopen.tooling.BlankGeneratorBuilder.Types: Edit a blank.
EDIT_CHARACTERISTIC - Static variable in class nxopen.routing.CustomManager.DesignRuleReason: Called after the Edit Characteristics command.
EDIT_CHARX - Static variable in class nxopen.routing.DesignRuleViolationCollection.Reason
EDIT_CONNECTION - Static variable in class nxopen.routing.CustomManager.CallbackReason: Called after the Edit Connection command.
EDIT_GROUP - Static variable in class nxopen.GroupBuilder.Action: Edit a group in Modeling or in Sketcher
EDIT_INSERT - Static variable in class nxopen.tooling.GeneralInsertBuilder.Types
EDIT_INSERT - Static variable in class nxopen.tooling.ShimBuilder.Types
EDIT_MODE - Static variable in class nxopen.tooling.ReusePositioningObjectBuilder.Types: dialog edit mode
EDIT_OPERATION - Static variable in class nxopen.uf.UFClone.OperationClass
EDIT_ORDINATE_DIMENSION - Static variable in class nxopen.tooling.AutoDimensionBuilder.MainType
EDIT_PLACE_PART - Static variable in class nxopen.routing.CustomManager.DesignRuleReason: Called after the Edit Place Part command.
EDIT_PLACE_PART - Static variable in class nxopen.routing.DesignRuleViolationCollection.Reason
EDIT_REGIONS_ONLY - Static variable in class nxopen.tooling.MWMoldedPartValidationBuilder.CalculateOption: edit properties of region faces only
EDIT_REPLACE_PART - Static variable in class nxopen.routing.CustomManager.CallbackReason: Unused.
EDIT_SEGMENT - Static variable in class nxopen.mechanicalrouting.EditPointBuilder.Motiontype: Edit Segment Motion
EDIT_SKETCH - Static variable in class nxopen.tooling.ReusePositioningObjectBuilder.SubTypes: general type
EDIT_SKETCH - Static variable in class nxopen.tooling.ReusePositioningObjectBuilder.Types: edit sketch type
EDIT_SOLVER_INPUT_FILE - Static variable in class nxopen.cae.SimSolution.SolveOption: edit existing solver input file
EDIT_WITH_ROLLBACK - Static variable in class nxopen.preferences.SessionModeling.SketchDefaultActionType: Edit sketch with rollback on double click
editableText() - Method in interface nxopen.annotations.TitleBlockCellBuilder: Returns the editable text of the cell
License requirements: None.
editAction() - Method in interface nxopen.assemblies.DesignElementBuilder: Returns the edit action type on a design element
License requirements: None.
editAngle(Measure, DisplayableObject, MeasureManager.EndpointType, DisplayableObject, MeasureManager.EndpointType, boolean) - Method in interface nxopen.MeasureManager: Edit an angle measurement between two objects.
editAngle(Measure, DisplayableObject, MeasureManager.EndpointType, DisplayableObject, MeasureManager.EndpointType, boolean, boolean) - Method in interface nxopen.MeasureManager: Edit an angle measurement between two objects.
editAngle(Measure, Point, Point, Point, boolean) - Method in interface nxopen.MeasureManager: Edit an angle measurement between three points.
editAngle(String, DisplayableObject, MeasureManager.EndpointType, DisplayableObject, MeasureManager.EndpointType, boolean) - Method in interface nxopen.MeasureManager: Edit an embedded angle measurement between two objects.
editAngle(String, DisplayableObject, MeasureManager.EndpointType, DisplayableObject, MeasureManager.EndpointType, boolean, boolean) - Method in interface nxopen.MeasureManager: Edit an embedded angle measurement between two objects.
editAngle(String, Point, Point, Point, boolean) - Method in interface nxopen.MeasureManager: Edit an embedded angle measurement between three points.
editAngle(Tag, Tag, UFGexp.Qualifier, Tag, Tag, UFGexp.Qualifier, Tag) - Method in interface nxopen.uf.UFGexp: Refer to UF_GEXP_edit_angle for documentation.
EditAnnotationBuilder - Interface in nxopen.ame: the builder for creating edit annotation
To create a new instance of this class, use AMEManager.createEditAnnotationBuilder(nxopen.Part, nxopen.ame.AMEExtendedObject)

Created in NX12.0.0
editArcData(Tag, UFCurve.Arc) - Method in interface nxopen.uf.UFCurve: Refer to UF_CURVE_edit_arc_data for documentation.
editArticStepSize(Tag, double) - Method in interface nxopen.uf.UFMotion: Refer to UF_MOTION_edit_artic_step_size for documentation.
editAssemblyCut(Tag, int, Tag[], int, Tag[], boolean) - Method in interface nxopen.uf.UFAssem: Refer to UF_ASSEM_edit_assembly_cut for documentation.
editAttribute(Tag, UFFam.AttributeData) - Method in interface nxopen.uf.UFFam: Refer to UF_FAM_edit_attribute for documentation.
editBeamOrientation(Tag, UFSf.OrientationData) - Method in interface nxopen.uf.UFSf: Refer to UF_SF_edit_beam_orientation for documentation.
EditBend - Interface in nxopen.features: Represents a edit bend feature
To create or edit an instance of this class, use EditBendBuilder

Created in NX7.5.0
editBendAllowanceFormula(Tag, String) - Method in interface nxopen.uf.UFModlSmd: Refer to UF_MODL_edit_bend_allowance_formula for documentation.
EditBendAngleBuilder - Interface in nxopen.routing: To create a new instance of this class, use RouteManager.createEditBendAngleBuilder(nxopen.NXObject)

Created in NX7.5.0
EditBendAngleBuilder.SelectedBendData - Class in nxopen.routing: This class holds the data returned from EditBendAngleBuilder.getSelectedBendData()
EditBendBuilder - Interface in nxopen.features.sheetmetal: Represents a EditBend builder
To create a new instance of this class, use SheetmetalManager.createEditBendBuilder(nxopen.features.Feature)

Created in NX7.5.0
editBendItem(int, int, String) - Method in interface nxopen.features.sheetmetal.BendListBuilder: This will edit a bend item in the list which has existing bend Id same as input id and assign new bend Id and bend name
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
editBendOperation(Tag, UFModl.BendOperationData) - Method in interface nxopen.uf.UFModlSmd: Refer to UF_MODL_edit_bend_operation for documentation.
editBlankOption() - Method in interface nxopen.tooling.BlankGeneratorBuilder: Returns the method used to edit a blank.
editBlendSection(Curve, double) - Method in interface nxopen.die.AddendumSectionBuilder: Edit radius value of blend section.
editBooleanWithRetainedOptions(Tag, Tag, Tag) - Method in interface nxopen.uf.UFModeling: Refer to UF_MODL_edit_boolean_with_retained_options for documentation.
editBoolParameter(String, boolean) - Method in interface nxopen.mechatronics.ParameterStockBuilder: Edits bool parameter value.
editBoolParameter(String, String, boolean) - Method in interface nxopen.mechatronics.TagTableBuilder: Edits bool parameter value.
EditBoundaryBuilder - Interface in nxopen.features.shipdesign: Used to create a EditBoundaryBuilder which is used to change the boundaries and split knuckle locations of profile systems.
editBoundaryPoint(Tag, Tag, Tag) - Method in interface nxopen.uf.UFDraw: Refer to UF_DRAW_edit_boundary_point for documentation.
editBoundBox() - Method in interface nxopen.tooling.SpecialFormingBuilder: Edit bound box.
editBox() - Method in interface nxopen.tooling.ReplaceSolidBuilder: Edit bounding box.
editBoxZone(Tag, String, double[], double[], double[]) - Method in interface nxopen.uf.UFFltr: Refer to UF_FLTR_edit_box_zone for documentation.
editBridgeFeature(Tag, UFCurve.BridgeData) - Method in interface nxopen.uf.UFCurve: Refer to UF_CURVE_edit_bridge_feature for documentation.
editBsurf(Tag, UFModl.Bsurface) - Method in interface nxopen.uf.UFModlGeneral: Refer to UF_MODL_edit_bsurf for documentation.
editByCurveFitData(Tag, UFModl.CurveFitData) - Method in interface nxopen.uf.UFCurve: Refer to UF_CURVE_edit_by_curve_fit_data for documentation.
editCallback(UserDefinedFeatureEditEvent) - Method in interface nxopen.features.UserDefinedFeatureClass.EditCallback: Prototype for edit callbacks
License requirements: None.
editCategoryDescr(Tag, String) - Method in interface nxopen.uf.UFLayer: Refer to UF_LAYER_edit_category_descr for documentation.
editCategoryLayer(Tag, boolean[]) - Method in interface nxopen.uf.UFLayer: Refer to UF_LAYER_edit_category_layer for documentation.
editCategoryName(Tag, String) - Method in interface nxopen.uf.UFLayer: Refer to UF_LAYER_edit_category_name for documentation.
editCell(boolean, int, String, String, boolean) - Method in interface nxopen.annotations.TitleBlockCellBuilder: Edits the title block cell attributes such as lock status, content type, value, label etc.
editCellText(DisplayableObject, String) - Method in interface nxopen.annotations.Table: Edit Cell Text
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
EditCharacteristicsBuilder - Interface in nxopen.routing: Builder to edit required and optional characteristics of Stock or Component as defined in the application view file.
editCircularIset(Tag, String, String, String, Tag) - Method in interface nxopen.uf.UFModlGeneral: Refer to UF_MODL_edit_circular_iset for documentation.
editCircularPatternFace(Tag, UFModl.DfoRegion, Tag, int, String) - Method in interface nxopen.uf.UFModlFeatures: Refer to UF_MODL_edit_circular_pattern_face for documentation.
EditClauseBuilder - Interface in nxopen.ame: Naming Rule Builder
To create a new instance of this class, use AMEManager.createEditClauseBuilder(nxopen.Part, nxopen.ame.AMEQuery, nxopen.ame.QueryClause)
Default values.
EditClauseBuilder.Operator - Class in nxopen.ame: the query operator
EditClauseBuilder.QueryClauseOperatorType - Class in nxopen.ame: the clause operator
EditClauseBuilder.Types - Class in nxopen.ame: the type of object to be used for edit clause
editColors() - Method in interface nxopen.PlotColorsWidthsBuilder: Edit drawing sheet colors
License requirements: None.
editColorSpreadsheet() - Method in interface nxopen.tooling.FaceColorManagementBuilder: The action to edit face color spreadsheet
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard") OR nx_electrode_wizard ("NX Electrode Wizard")
.
editCombineCurves(Tag, Tag, UFCurve.CombineCurvesDirection, Tag, UFCurve.CombineCurvesDirection, String) - Method in interface nxopen.uf.UFCurve: Refer to UF_CURVE_edit_combine_curves for documentation.
editComment(String) - Method in interface nxopen.Expression: Changes the comment.
editCompDrawing(NXObject, String, String, String, String, String) - Method in interface nxopen.tooling.CompDrawingBuilder: Edits a drawing in a component.
editComponentDimensions(Component) - Method in interface nxopen.tooling.MoldFillingBuilder: Edits standard part dimensions.
EditComponentSettingsBuilder - Interface in nxopen.layout2d: Represents a EditComponentSettingsBuilder builder.
editConfigurationFile() - Method in interface nxopen.tooling.ObjectAttributeManagementBuilder: Tha action to edit attribute spreadsheet
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
editConicData(Tag, UFCurve.Conic) - Method in interface nxopen.uf.UFCurve: Refer to UF_CURVE_edit_conic_data for documentation.
editConstraintReference(ConstraintReference, NXObject, NXObject, boolean, boolean, boolean) - Method in interface nxopen.positioning.Constraint: Adds geometry to a constraint and sets the movable object to be constrained, replacing the properties of an existing reference of the constraint.
EditContextAttributesBuilder - Interface in nxopen.features.shipdesign: Represents the class Features.ShipDesign.EditContextAttributesBuilder which is used to edit the context attributes on the basic design features.
editCopy() - Method in interface nxopen.features.SnipSurfaceBuilder: Returns a value indicating whether to keep the original surface intact
License requirements: None.
editCopy() - Method in interface nxopen.geometricutilities.LocalUntrimBuilder: Returns the flag to indicate whether to edit a copied face or not.
EditCornerBuilder - Interface in nxopen.features.sheetmetal: Represents a EditCornerBuilder
To create a new instance of this class, use SheetmetalManager.createEditCornerBuilder()
Default values.
EditCornerBuilder.BendClosureTypeOptions - Class in nxopen.features.sheetmetal: This enum specifies the type of bend closure required at the corner.
EditCornerBuilder.CornerReliefTypeOptions - Class in nxopen.features.sheetmetal: This enum specifies the type of relief required at the corner.
EditCornerBuilder.FacePairData - Class in nxopen.features.sheetmetal: This class holds the data returned from EditCornerBuilder.getFacePair(int)
EditCornerBuilder.PlateClosureTypeOptions - Class in nxopen.features.sheetmetal: This enum specifies the type of plate closure required at the corner.
editCornerByBendRadius(ControlPoint, ControlPoint, double, int, SBendCorner) - Method in interface nxopen.routing.SBendCornerCollection: Edits a selected S-Bend corner between the start rcp and end rcp using a bend radius.
editCornerByBendRatio(ControlPoint, ControlPoint, double, int, SBendCorner) - Method in interface nxopen.routing.SBendCornerCollection: Edits a S-Bend corner between the start rcp and end rcp using a bend ratio.
EditCrossSection - Interface in nxopen.features: Represents a edit cross section feature.
EditCrossSectionBuilder - Interface in nxopen.features: Represents a EditCrossSection builder
To create a new instance of this class, use FeatureCollection.createEditCrossSectionBuilder(nxopen.features.EditCrossSection)
Default values.
editCSYS(Point3d, Matrix3x3) - Method in interface nxopen.features.FitSurfaceBuilder: The edit CSYS for Orientation option
License requirements: None.
editDataBase() - Method in interface nxopen.tooling.RunnerBuilder: Edits runner section data base.
editDataBase() - Method in interface nxopen.tooling.StandardPartBuilder: Edits the data file of the standard item selected in Reuse Member View
License requirements: None.
editDatabase() - Method in interface nxopen.tooling.SubInsertBuilder: Edit datebase of foot
License requirements: None.
editDataItem(String, ManufacturingStockBuilder.CheckBoxStatus, String) - Method in interface nxopen.features.shipdesign.ManufacturingStockBuilder: Edits data item.
editDataSourceBuilder(DataSource) - Method in interface nxopen.cae.DataSourceCollection: Creates a DataSourceBuilder that will be used to edit a data source
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Created in NX12.0.0
editDatumDirection(Tag, Tag) - Method in interface nxopen.uf.UFModlFeatures: Refer to UF_MODL_edit_datum_direction for documentation.
editDatumPoint(Tag, Tag) - Method in interface nxopen.uf.UFModlFeatures: Refer to UF_MODL_edit_datum_point for documentation.
editDependentVariable(FieldVariable, String, Unit) - Method in interface nxopen.fields.FieldManager: Edit dependent variable
License requirements: None.
editDependentVariable(FieldVariable, Unit) - Method in interface nxopen.fields.FieldManager: Edit dependent variable
License requirements: None.
editDimAssoc(Tag, double[], double[], int, UFDrf.Object) - Method in interface nxopen.uf.UFDrf: Refer to UF_DRF_edit_dim_assoc for documentation.
EditDimensionBuilder - Interface in nxopen.features: Represents a builder of edit feature dimensions
To create a new instance of this class, use FeatureCollection.createEditDimensionBuilder()
Default values.
editDistance(Measure, NXObject, NXObject) - Method in interface nxopen.MeasureManager: Edit a minimum / maximum distance measure between two objects or two collections.
editDistance(Measure, DisplayableObject, Point3d, DisplayableObject, Point3d) - Method in interface nxopen.MeasureManager: Edit a local minimum distance measure between two objects with two start points.
editDistance(Measure, DisplayableObject, DisplayableObject, Direction) - Method in interface nxopen.MeasureManager: Edit a projected minimum distance measure between two objects.
editDistance(Measure, DisplayableObject, DisplayableObject, Direction, MeasureManager.ProjectionType) - Method in interface nxopen.MeasureManager: Edit a projected minimum distance measure or clearance distance between two objects.Note that for design in context the direction vector needs to be in the coordinates of the work part.
editDistance(Measure, DisplayableObject) - Method in interface nxopen.MeasureManager: Edit a radial distance measure for arcs and circles.
editDistance(String, DisplayableObject, DisplayableObject) - Method in interface nxopen.MeasureManager: Edit an embedded minimum or maximum distance measure between two objects.
editDistance(String, DisplayableObject, Point3d, DisplayableObject, Point3d) - Method in interface nxopen.MeasureManager: Edit an embedded local minimum distance measure between two objects with two start points.
editDistance(String, DisplayableObject, DisplayableObject, Direction) - Method in interface nxopen.MeasureManager: Edit an embedded projected minimum distance measure between two objects.
editDistance(String, DisplayableObject, DisplayableObject, Direction, MeasureManager.ProjectionType) - Method in interface nxopen.MeasureManager: Edit an embedded projected minimum or clearance distance measure between two objects.
editDistance(String, DisplayableObject) - Method in interface nxopen.MeasureManager: Edit an embedded radial distance measure between two objects.
editDistance(Tag, Tag, Tag, Tag, Tag) - Method in interface nxopen.uf.UFGexp: Refer to UF_GEXP_edit_distance for documentation.
editDrawing(String, String) - Method in interface nxopen.tooling.AssemblyDrawingBuilder: Edit drawing
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
editDrawing(String, String, String, String) - Method in interface nxopen.tooling.CompDrawingBuilder: Deprecated.
Deprecated in NX8.5.0. Use CompDrawingBuilder.editCompDrawing(nxopen.NXObject, java.lang.String, java.lang.String, java.lang.String, java.lang.String, java.lang.String) instead.
editDursolNx(Tag, String, UFSf.DursolStressCriterion, UFSf.DursolStressType, UFSf.DursolDesignLifeCriterion, int, double, UFSf.DursolFatigueLifeCriterion, int) - Method in interface nxopen.uf.UFSf: Refer to UF_SF_edit_dursol_nx for documentation.
EDITED - Static variable in class nxopen.display.CgfxMattexBuilder.TextureSpace: Deprecated.

the one edited using the material texture dialog
editedConstraintCurve() - Method in interface nxopen.die.AddendumSectionBuilder: Returns the edited constraint curve.
editedExpressionsList() - Method in interface nxopen.features.InstanceFeatureBuilder: Returns the edited expressions list InstanceEditedExpressionsList .
editedExpressionsList() - Method in interface nxopen.geometricutilities.PatternInstanceEditBuilder: Returns the edited expressions list InstanceEditedExpressionsList .
editEdge() - Method in interface nxopen.geometricutilities.MatchSurfaceBuilder: Returns the selected edge for matching
License requirements: None.
editEdgeBlend(Tag, UFModl.EdgeBlendData) - Method in interface nxopen.uf.UFModlFeatures: Refer to UF_MODL_edit_edge_blend for documentation.
editEdgeBlendMult(Tag, UFModl.EdgeBlendMultData) - Method in interface nxopen.uf.UFModlFeatures: Refer to UF_MODL_edit_edge_blend_mult for documentation.
editEdgeTag - Variable in class nxopen.uf.UFModl.MatchedgeData
editedSignal - Variable in class nxopen.mechatronics.SignalAdapterBuilder.SignalData: Edited Signal
editElement(int, NXObject, CamProfileBuilder.Element) - Method in interface nxopen.mechatronics.CamProfileBuilder: Edit the specific element of builder.
EditEngineeringObjectBuilder - Interface in nxopen.ame: JA class for the Eng object dialog
To create a new instance of this class, use AMEManager.createEditEngineeringObjectBuilder(nxopen.Part, nxopen.ame.AMEEngObject)

Created in NX11.0.0
EditEngineeringObjectBuilder.SourceType - Class in nxopen.ame: Assign EOs or POUs
editEnlarge(Tag, int, String[], double) - Method in interface nxopen.uf.UFModlFeatures: Refer to UF_MODL_edit_enlarge for documentation.
editEntryExitPoints(boolean) - Method in interface nxopen.cam.InspectionPathBuilder: Edit entry or exit point
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
editEvent() - Method in interface nxopen.cae.DurabilityEvaluateFatigueHistoryBuilder: The function is called when the user click the button of Edit Event Attributes
License requirements: nx_adv_durability ("NX Advanced Durability")
.
editExp(String) - Method in interface nxopen.uf.UFModlGeneral: Refer to UF_MODL_edit_exp for documentation.
editExtrudeCurves() - Method in interface nxopen.tooling.SpecialFormingBuilder: Edit extrude curves.
editFace() - Method in interface nxopen.die.QuickBinderBuilder: Edit the parameters of a face according to the type of edit previously indicated by QuickBinderBuilder.editType() .
editFace - Variable in class nxopen.uf.UFModl.SnipsrfFeatureData
editFaceConstraint(Tag, UFModl.DfoRegion, UFModl.DfoConstraint) - Method in interface nxopen.uf.UFModlFeatures: Refer to UF_MODL_edit_face_constraint for documentation.
editFaceGridCount(Tag, int, int) - Method in interface nxopen.uf.UFModeling: Refer to UF_MODL_edit_face_grid_count for documentation.
editFaceJoin(int, Tag, Tag[]) - Method in interface nxopen.uf.UFModeling: Refer to UF_MODL_edit_face_join for documentation.
editFaceProperties(Measure, ScCollector) - Method in interface nxopen.MeasureManager: Edit the objects of a face property measure using selection intent.
editFaceProperties(Measure, IParameterizedSurface[]) - Method in interface nxopen.MeasureManager: Edit the objects of a face property measure.
editFaceProperties(String, ScCollector) - Method in interface nxopen.MeasureManager: Edit the objects of an embedded face measure using selection intent

License requirements: solid_modeling ("SOLIDS MODELING")
.
editFaceProperties(String, IParameterizedSurface[]) - Method in interface nxopen.MeasureManager: Edit the objects of an embedded face measure.
editFalseBody() - Method in interface nxopen.tooling.PocketBuilder: Edits false body
License requirements: None.
editFamily(Tag, UFFam.FamilyData) - Method in interface nxopen.uf.UFFam: Refer to UF_FAM_edit_family for documentation.
editFeature(Feature) - Method in interface nxopen.shipdesign.NavigatorCollection: Edit feature.
editFeatureGroup() - Method in interface nxopen.tooling.ReusableObjectPasteBuilder: Returns the feature group created after reuse paste
License requirements: None.
editFeatureGroup() - Method in interface nxopen.tooling.ReusePositioningObjectBuilder: Returns the feature group created after reuse paste
License requirements: None.
editFieldExpression(String, Unit, FieldVariable[], boolean) - Method in interface nxopen.fields.FieldExpression: Edit the expression field.
editFieldFormula(FieldVariable[], FieldExpression[]) - Method in interface nxopen.fields.FieldFormula: Edit the formula field.
editFieldFormulaVariables(FieldVariable[], FieldVariable[]) - Method in interface nxopen.fields.FieldFormula: Edit the formula field variables.
editFieldLink(Field) - Method in interface nxopen.fields.FieldLink: Edit the link field.
editFieldLinksTable(FieldVariable[], FieldVariable[], double[], Field[]) - Method in interface nxopen.fields.FieldLinksTable: Edit the LinksTable field.
editFieldLinksTable(FieldVariable[], FieldVariable[], double[], Field[], boolean[]) - Method in interface nxopen.fields.FieldLinksTable: Edit the LinksTable field.
editFieldTable(FieldVariable[], FieldVariable[], double[]) - Method in interface nxopen.fields.FieldTable: Edit the table field.
editFieldTableComplexDisplay(boolean[], boolean[]) - Method in interface nxopen.fields.FieldTable: Edit the table field complex display.
editFieldTableComplexUnits(Unit[]) - Method in interface nxopen.fields.FieldTable: Edit the table field complex units array.
editFilter(Tag, String, String) - Method in interface nxopen.uf.UFFltr: Refer to UF_FLTR_edit_filter for documentation.
editFixedPlane(Point3d, Matrix3x3) - Method in interface nxopen.Plane: Edit a fixed plane object with a new origin and matrix.
editFormableFeatureState(Tag, UFModl.State, UFModl.StateInfo) - Method in interface nxopen.uf.UFModlSmd: Refer to UF_MODL_edit_formable_feature_state for documentation.
editGeodesicSketch(GeodesicSketch) - Method in interface nxopen.features.GeodesicSketchCollection: Enter a GeodesicSketch task environment
License requirements: nx_aero_design (" NX Aero Design")

Created in NX10.0.0
editgraph() - Method in interface nxopen.cae.PostGraph: Edit the PostGraph objet parameters
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")

Created in NX9.0.0
editHolderSection(Tag, int, UFCutter.HolderSection) - Method in interface nxopen.uf.UFCutter: Refer to UF_CUTTER_edit_holder_section for documentation.
editHoleType(Tag, UFModl.HoleType) - Method in interface nxopen.uf.UFModlFeatures: Refer to UF_MODL_edit_hole_type for documentation.
editHollow(Tag, int, double, String, int, Tag[], int, Tag[], int, Tag[], String[]) - Method in interface nxopen.uf.UFModlFeatures: Refer to UF_MODL_edit_hollow for documentation.
editIdealizeParms(Tag, UFVariant) - Method in interface nxopen.uf.UFSf: Refer to UF_SF_edit_idealize_parms for documentation.
EditIdealizeParmsData() - Constructor for class nxopen.uf.UFSf.EditIdealizeParmsData
editImage(MasterSymbol, String) - Method in interface nxopen.annotations.MasterSymbolBuilder: Changes symbol image
License requirements: drafting ("DRAFTING")
.
editImportBodyFeature(Tag, UFModl.ImportBodyFeatureEditOption, String) - Method in interface nxopen.uf.UFModl: Refer to UF_MODL_edit_import_body_feature for documentation.
editImportBodyFeatures(UFModl.ImportBodyFeatureEditOption) - Method in interface nxopen.uf.UFModl: Refer to UF_MODL_edit_import_body_features for documentation.
editImprFacesParms(Tag, UFModl.ImprintFacesData) - Method in interface nxopen.uf.UFModlFeatures: Refer to UF_MODL_edit_impr_faces_parms for documentation.
editImprLoopParms(Tag, UFModl.ImprintLoopData) - Method in interface nxopen.uf.UFModlFeatures: Refer to UF_MODL_edit_impr_loop_parms for documentation.
editIndependentVariable(FieldVariable, String, Unit, boolean, boolean, double, boolean, boolean, double, boolean, int, boolean, double) - Method in interface nxopen.fields.FieldManager: Edit an independent variable
License requirements: None.
editIndependentVariable(FieldVariable, Unit) - Method in interface nxopen.fields.FieldManager: Edit an independent variable
License requirements: None.
editInsetFlange(Tag, UFModl.InsetFlangeData) - Method in interface nxopen.uf.UFModlSmd: Refer to UF_MODL_edit_inset_flange for documentation.
editInstanceExpression() - Method in interface nxopen.geometricutilities.InstanceEditedExpressionsList: This is the default creator for InstanceEditedExpressionItem .
editInstanceExpression(Expression, Expression) - Method in interface nxopen.geometricutilities.InstanceEditedExpressionsList: This is the creator for InstanceEditedExpressionItem which should be used.
editInterference(Tag, UFMotion.Interference) - Method in interface nxopen.uf.UFMotion: Refer to UF_MOTION_edit_interference for documentation.
editIntObject(int, Tag[], int, Tag[], Tag) - Method in interface nxopen.uf.UFCurve: Refer to UF_CURVE_edit_int_object for documentation.
editIntParameter(String, int) - Method in interface nxopen.mechatronics.ParameterStockBuilder: Edits Int parameter.
editIntParameter(String, String, int) - Method in interface nxopen.mechatronics.TagTableBuilder: Edits Int parameter.
editIsetArray(Tag, UFAssem.IsetArrayData) - Method in interface nxopen.uf.UFAssem: Refer to UF_ASSEM_edit_iset_array for documentation.
editIsocline(Tag, int, Tag[], double[], String, String, String) - Method in interface nxopen.uf.UFCurve: Refer to UF_CURVE_edit_isocline for documentation.
editJoinedFeature(Tag, UFModl.StringList, int, double[]) - Method in interface nxopen.uf.UFCurve: Refer to UF_CURVE_edit_joined_feature for documentation.
EditLeaderBuilder - Interface in nxopen.annotations: Represents a builder that provides an interface to adding and editing leaders to table entities
To create a new instance of this class, use AnnotationManager.createEditLeaderBuilder(nxopen.DisplayableObject)

Created in NX6.0.1
editLength(Measure, ScCollector) - Method in interface nxopen.MeasureManager: Edit a length measure using selection intent.
editLength(Measure, DisplayableObject[]) - Method in interface nxopen.MeasureManager: Edit a length measure.
editLength(String, ScCollector) - Method in interface nxopen.MeasureManager: Edit an embedded length measure with selection intent.
editLength(String, DisplayableObject[]) - Method in interface nxopen.MeasureManager: Edit an embedded length measure.
editLength(Tag, int, double, int, int) - Method in interface nxopen.uf.UFCurve: Refer to UF_CURVE_edit_length for documentation.
editLength(Tag, Tag, Tag) - Method in interface nxopen.uf.UFGexp: Refer to UF_GEXP_edit_length for documentation.
editLevelUsingGeom(Tag, int, Tag, double) - Method in interface nxopen.uf.UFCutLevels: Refer to UF_CUT_LEVELS_edit_level_using_geom for documentation.
editLevelUsingZ(Tag, int, double, double) - Method in interface nxopen.uf.UFCutLevels: Refer to UF_CUT_LEVELS_edit_level_using_z for documentation.
editLineArc(Tag, UFCurve.LineArc) - Method in interface nxopen.uf.UFCurve: Refer to UF_CURVE_edit_line_arc for documentation.
editLinearIset(Tag, String, String, String, String) - Method in interface nxopen.uf.UFModlGeneral: Refer to UF_MODL_edit_linear_iset for documentation.
editLineData(Tag, UFCurve.Line) - Method in interface nxopen.uf.UFCurve: Refer to UF_CURVE_edit_line_data for documentation.
EditLineSegmentBuilder - Interface in nxopen.routing: Builder for the "Edit Line Segment" operation.
EditLineSegmentBuilder.OrientationData - Class in nxopen.routing: This class holds the data returned from EditLineSegmentBuilder.getOrientation()
editLinkedExterior(Tag, UFModl.LinkedExt) - Method in interface nxopen.uf.UFModl: Refer to UF_MODL_edit_linked_exterior for documentation.
editListParameter(String, String[], ParameterStockBuilder.Assignment) - Method in interface nxopen.mechatronics.ParameterStockBuilder: Edits List parameter.
editListParameter(String, String, int) - Method in interface nxopen.mechatronics.TagTableBuilder: Edits List parameter.
editLocalScale(Tag, UFModl.DfoScaleType, UFModl.DfoRegion, Tag, Tag, Tag, String[]) - Method in interface nxopen.uf.UFModlFeatures: Refer to UF_MODL_edit_local_scale for documentation.
editLogicalNode(LogicObject, String, String, Component, Component, LogicObjectBuilder.ParameterData[]) - Method in interface nxopen.mechatronics.ECADImportBuilder: Deprecated.
Deprecated in NX9.0.0. This method has no replacement. It is no longer supported.
editLvNx(Tag, String, double, int, UFSf.LvFunctionMode) - Method in interface nxopen.uf.UFSf: Refer to UF_SF_edit_lv_nx for documentation.
editMachineLibrary(String, String, String) - Method in interface nxopen.sim.MachineLibraryBuilder: Edit a specific machine of the database.
editMassProperties(Measure, ScCollector) - Method in interface nxopen.MeasureManager: Edit the objects in a mass property measurement feature using a selection intent collection

License requirements: solid_modeling ("SOLIDS MODELING")
.
editMassProperties(Measure, IBody[]) - Method in interface nxopen.MeasureManager: Edit the objects in a mass property measurement feature

License requirements: solid_modeling ("SOLIDS MODELING")
.
editMassProperties(String, ScCollector) - Method in interface nxopen.MeasureManager: Edit the objects in an embedded mass property measure with a selection collector.
editMassProperties(String, IBody[]) - Method in interface nxopen.MeasureManager: Edit the objects in an embedded mass property measure.
editMatrixOfObject(Tag, Tag) - Method in interface nxopen.uf.UFCsys: Refer to UF_CSYS_edit_matrix_of_object for documentation.
editMcArray(Tag, UFAssem.McArrayData) - Method in interface nxopen.uf.UFAssem: Refer to UF_ASSEM_edit_mc_array for documentation.
editMcdLogical(LogicObject, Component[], LogicObjectBuilder.ParameterData[]) - Method in interface nxopen.tooling.SIZERImportBuilder: Edits logical node in system navigator.
editMeasurement(Tag, UFMotion.Measurement) - Method in interface nxopen.uf.UFMotion: Refer to UF_MOTION_edit_measurement for documentation.
editMember(int, PartFamilyMemberValues) - Method in interface nxopen.PartFamilyManager: Deprecated.
Deprecated in NX9.0.0. Use TemplateManager.getInstanceDefinition(java.lang.String) and InstanceDefinition.setValueOfAttribute(nxopen.partfamily.FamilyAttribute, java.lang.String) instead
editMember(Tag, int, UFFam.MemberData) - Method in interface nxopen.uf.UFFam: Refer to UF_FAM_edit_member for documentation.
editMethod() - Method in interface nxopen.tooling.ScrapDesignBuilder: Returns the edit method, which includes splitting, merging, applying minimum radius, changing station, deleting and updating
License requirements: None.
editMirrorPatternFace(Tag, UFModl.DfoRegion, Tag) - Method in interface nxopen.uf.UFModlFeatures: Refer to UF_MODL_edit_mirror_pattern_face for documentation.
editMirrorSet(Tag, Tag[], int, Tag) - Method in interface nxopen.uf.UFModeling: Refer to UF_MODL_edit_mirror_set for documentation.
editMoveMultPoints(Tag, UFCurve.Bcmmcp) - Method in interface nxopen.uf.UFCurve: Refer to UF_CURVE_edit_move_mult_points for documentation.
editNonMasterName(LogicalObject, String, String) - Method in interface nxopen.pdm.PartOperationBuilder: Deprecated.
Deprecated in NX10.0.0. Use PartOperationCopyBuilder.editNonMasterToCopyName(nxopen.pdm.LogicalObject, java.lang.String, java.lang.String) instead
editNonmasterNameToSaveAs(String, String) - Method in interface nxopen.pdm.PartFromPartBuilder: Sets the name the non-master part will get saved as.
editNonMasterToCopyName(LogicalObject, String, String) - Method in interface nxopen.pdm.NonMasterData: Sets the name the non-master part will get saved as.
editNonMasterToCopyName(LogicalObject, String, String) - Method in interface nxopen.pdm.PartOperationCopyBuilder: Deprecated.
Deprecated in NX11.0.0. Use NonMasterData.editNonMasterToCopyName(nxopen.pdm.LogicalObject, java.lang.String, java.lang.String) instead
editObject(Tag) - Method in interface nxopen.uf.UFUiParam: Refer to UF_UI_PARAM_edit_object for documentation.
EditObjectDisplayBuilder - Interface in nxopen.markup: The EditObjectDisplayBuilder is used to edit display settings of the markup objects.
editObjects() - Method in interface nxopen.drawings.SectionInViewBuilder: Returns the objects
License requirements: None.
editOcfFeature(UFCurve.OcfData, Tag) - Method in interface nxopen.uf.UFCurve: Refer to UF_CURVE_edit_ocf_feature for documentation.
editOffsetMidsrf(Tag, double, double, Tag) - Method in interface nxopen.uf.UFSf: Refer to UF_SF_edit_offset_midsrf for documentation.
editOffsetRegion(Tag, UFModl.DfoRegion, String) - Method in interface nxopen.uf.UFModlFeatures: Refer to UF_MODL_edit_offset_region for documentation.
editOffsetSpreadsheet() - Method in interface nxopen.tooling.PunchInsertBuilder: Edit offset spreadhseet
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
editOption() - Method in interface nxopen.tooling.DirectUnfoldBuilder: Returns the edit intermediate stage option.
editOption() - Method in interface nxopen.tooling.IntermediateStageBuilder: Returns the edit intermediate stage option.
EditOrderBuilder - Interface in nxopen.ame: JA class for the Edit Order dialog
To create a new instance of this class, use AMEManager.createEditOrderBuilder(nxopen.Part, nxopen.NXObject)

Created in NX12.0.0
editParameter(String, String) - Method in interface nxopen.features.shipdesign.SteelFeatureSpreadsheetBuilder: This method simply changes the value of a parameter.
editParameter(String, String) - Method in interface nxopen.tooling.SpreadsheetData: Modify the spreadsheet parameter.
editPartFamily() - Method in interface nxopen.partfamily.TemplateManager: Edits a part family associated with the manager/owning part
License requirements: solid_modeling ("SOLIDS MODELING")
.
editPartingLines() - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder: Returns the parting lines to edit.
editPatchBodyParms(Tag, Tag, Tag, Tag, int) - Method in interface nxopen.uf.UFModeling: Refer to UF_MODL_edit_patch_body_parms for documentation.
editPipNode(Tag, UFSmd.PipNodeData) - Method in interface nxopen.uf.UFSmd: Refer to UF_SMD_edit_pip_node for documentation.
EditPlacementBuilder - Interface in nxopen.mechanicalrouting: the Builder to Edit Placement
To create a new instance of this class, use BuilderFactory.createEditPlacementBuilder(nxopen.Part, nxopen.assemblies.Component)

Created in NX12.0.0
EditPlacePartBuilder - Interface in nxopen.routing: To create a new instance of this class, use RouteManager.createEditPlacePartBuilder(nxopen.assemblies.Component)

Created in NX10.0.0
editPlane(Tag, double[], double[]) - Method in interface nxopen.uf.UFModeling: Refer to UF_MODL_edit_plane for documentation.
editPlaneZone(Tag, String, double[], double[]) - Method in interface nxopen.uf.UFFltr: Refer to UF_FLTR_edit_plane_zone for documentation.
editPoint(Measure, Point, CartesianCoordinateSystem) - Method in interface nxopen.MeasureManager: Edit a point measurement between a point and either the absolute csys, or a specified coordinate system.
editPoint(Point, double, boolean) - Method in interface nxopen.tooling.ReusePositioningObjectBuilder: Edits point from sketch
License requirements: None.
editPoint(Point, double, double) - Method in interface nxopen.tooling.ReusePositioningObjectBuilder: Edits point from sketch
License requirements: None.
EditPointBuilder - Interface in nxopen.mechanicalrouting: Represents EditPointBuilder .
EditPointBuilder.Editsegmenttype - Class in nxopen.mechanicalrouting: Specifies the options available for Edit Segment motion.
EditPointBuilder.Motiontype - Class in nxopen.mechanicalrouting: Specifies the options available for motion.
editPointData(Tag, double[]) - Method in interface nxopen.uf.UFCurve: Refer to UF_CURVE_edit_point_data for documentation.
editPointOnPlanar(Point, double, boolean) - Method in interface nxopen.tooling.ReusePositioningObjectBuilder: Edits point on the planar face/curve
License requirements: None.
editPointOnPlanar(Point, double, double) - Method in interface nxopen.tooling.ReusePositioningObjectBuilder: Edits point on the planar face/curve
License requirements: None.
editPointsParms(Tag, int, Tag[]) - Method in interface nxopen.uf.UFModeling: Refer to UF_MODL_edit_points_parms for documentation.
editPolarAngle(Measure, MeasureManager.MeasureType, Point, Direction, ScCollector) - Method in interface nxopen.MeasureManager: Edit a polar angle measurement feature.
editPolarArea(Measure, ScCollector) - Method in interface nxopen.MeasureManager: Edit a polar area measurement feature.
editPolarRadius(Measure, MeasureManager.MeasureType, Point, ScCollector) - Method in interface nxopen.MeasureManager: Edit a polar radius measurement feature.
editPoleUpdateSurface() - Method in interface nxopen.features.MatchEdgeBuilder: Updates surface during edit pole.
editPolyline(NXObject) - Method in interface nxopen.features.PolylineBuilder: Sets a non-parametric polyline for editing
License requirements: features_modeling ("FEATURES MODELING")
.
editPrimaryParameter(String, String) - Method in interface nxopen.features.shipdesign.SteelFeatureSpreadsheetBuilder: This method changes the value of a parameter and queries from the spread sheet to update the related parameter values.
editProductInterfaceObject(InterfaceObject, NXObject, String, String, boolean) - Method in interface nxopen.assemblies.productinterface.ObjectBuilder: Edits a product interface object
License requirements: None.
editProductInterfaceObject1(InterfaceObject, NXObject, String, String, boolean, InterfaceObject.InterfaceUsageType) - Method in interface nxopen.assemblies.productinterface.ObjectBuilder: Edits a product interface object with interface object type .
editProfileExternalTable(FieldReference, String, String, int, int, int, int, Expression, Expression, Expression, Expression, Expression, Expression, boolean, boolean, FieldEvaluator.InterpolationEnum, FieldEvaluator.ValuesOutsideTableInterpolationEnum, FieldEvaluator.ValuesOutsideTableInterpolationEnum, Expression, Expression) - Method in interface nxopen.fields.FieldManager: Modifies an External Data Table Profile
License requirements: None.
editProjCurves(Tag, int, Tag[], int, Tag[], UFCurve.Proj) - Method in interface nxopen.uf.UFCurve: Refer to UF_CURVE_edit_proj_curves for documentation.
editProjCurves1(Tag, int, Tag[], int, Tag[], UFCurve.Proj1) - Method in interface nxopen.uf.UFCurve: Refer to UF_CURVE_edit_proj_curves1 for documentation.
EditQueryBuilder - Interface in nxopen.ame: Edit Query Builder
To create a new instance of this class, use AMEManager.createEditQueryBuilder(nxopen.Part)

Created in NX11.0.0
editRealParameter(String, double, Unit) - Method in interface nxopen.mechatronics.ParameterStockBuilder: Edits Real parameter.
editRealParameter(String, String, double) - Method in interface nxopen.mechatronics.TagTableBuilder: Edits Real parameter.
editReblendFace(Tag, UFModl.ReblendFaceData) - Method in interface nxopen.uf.UFModlFeatures: Refer to UF_MODL_edit_reblend_face for documentation.
editRecord(XyFunctionMacroType, XyFunctionGeneralType, int, AfuData) - Method in interface nxopen.cae.AfuManager: Edit an existing AFU Data Record.
editRecord(int, AfuData) - Method in interface nxopen.cae.AfuManager: Edit an existing AFU Data Record.
editRecord(int, BaseRecord) - Method in interface nxopen.cae.xyplot.I2DDataPlot: Edits nth record of plot.
editRecords(BaseRecord[]) - Method in interface nxopen.cae.xyplot.I3DDataPlot: Edits records of plot.
editRectangularExtreme(Measure, Direction, Direction, Direction, ScCollector) - Method in interface nxopen.MeasureManager: Edit a rectangular extreme point measurement feature.
editRectangularPatternFace(Tag, UFModl.DfoRegion, Tag, Tag, int, int, String, String) - Method in interface nxopen.uf.UFModlFeatures: Refer to UF_MODL_edit_rectangular_pattern_face for documentation.
editReferenceFace(int, Face[], Face[]) - Method in interface nxopen.tooling.EdgePatchBuilder: Add or remove reference faces.
editRefitFaceFeature(UFModl.RefitFaceData, Tag) - Method in interface nxopen.uf.UFModlFeatures: Refer to UF_MODL_edit_refit_face_feature for documentation.
editRefSetData(Tag, double[], double[]) - Method in interface nxopen.uf.UFAssem: Refer to UF_ASSEM_edit_ref_set_data for documentation.
editRegFile() - Method in interface nxopen.tooling.SubInsertBuilder: Edit register file of foot
License requirements: None.
editRegister() - Method in interface nxopen.tooling.StandardPartBuilder: Edits the registering spread sheet file of the standard item selected in Reuse Member View.
editRegisterFile() - Method in interface nxopen.tooling.RunnerBuilder: Edits runner section register file.
editReplaceFace(Tag, Tag[], int, Tag[], int, Tag, boolean) - Method in interface nxopen.uf.UFModlFeatures: Refer to UF_MODL_edit_replace_face for documentation.
editResizeFace(Tag, Tag[], int, Tag[], int, String) - Method in interface nxopen.uf.UFModlFeatures: Refer to UF_MODL_edit_resize_face for documentation.
editReusableComponent(Component) - Method in interface nxopen.tooling.AddReusablePart: Edits a reusable component
License requirements: None.
editRipedge(Tag, UFModl.RipedgeData) - Method in interface nxopen.uf.UFModlSmd: Refer to UF_MODL_edit_ripedge for documentation.
editRotation(double[], double[]) - Method in interface nxopen.uf.UFMtx4: Refer to UF_MTX4_edit_rotation for documentation.
editRoughOffset(Tag, UFModl.RoughOffset) - Method in interface nxopen.uf.UFModlFeatures: Refer to UF_MODL_edit_rough_offset for documentation.
editRun(Tag, String, String, int, Tag[], int, Tag[], int, Tag[]) - Method in interface nxopen.uf.UFRouteRun: Refer to UF_ROUTE_RUN_edit_run for documentation.
editRunsimulinkMfile() - Method in interface nxopen.motion.MotionSolution: Edit runsimulink mfile
License requirements: nx_motion_cosim ("NX Motion CoSimulation")
.
editScale(UFModl.ScaleType, Tag, Tag, Tag, Tag, String[]) - Method in interface nxopen.uf.UFModeling: Refer to UF_MODL_edit_scale for documentation.
editScale(double[], double) - Method in interface nxopen.uf.UFMtx4: Refer to UF_MTX4_edit_scale for documentation.
editScDistance(Measure, ScCollector, ScCollector, MeasureManager.MeasureType) - Method in interface nxopen.MeasureManager: Edit a minimum / maximum distance measure between two collections and allow changing of the measurement type

License requirements: solid_modeling ("SOLIDS MODELING")
.
EditSectionLineSettingsBuilder - Interface in nxopen.drawings: Represents a EditSectionLineSettingsBuilder builder.
editSetHideState(Tag, int) - Method in interface nxopen.uf.UFModeling: Refer to UF_MODL_edit_set_hide_state for documentation.
editSetMembers(Tag, Tag[], int) - Method in interface nxopen.uf.UFModeling: Refer to UF_MODL_edit_set_members for documentation.
EditSettingsBuilder - Interface in nxopen.annotations: the edit settings builder
To create a new instance of this class, use SettingsManager.createAnnotationEditSettingsBuilder(nxopen.DisplayableObject[])

Created in NX9.0.0
editSewSheetBody(Tag, Tag, int, Tag[], double) - Method in interface nxopen.uf.UFModeling: Refer to UF_MODL_edit_sew_sheet_body for documentation.
editSewSolidBody(Tag, int, Tag[], int, Tag[], double) - Method in interface nxopen.uf.UFModeling: Refer to UF_MODL_edit_sew_solid_body for documentation.
editSimplifyParms(Tag, UFModl.SimplData) - Method in interface nxopen.uf.UFModlFeatures: Refer to UF_MODL_edit_simplify_parms for documentation.
EditSimplifyParmsData() - Constructor for class nxopen.uf.UFModlFeatures.EditSimplifyParmsData
editSingleJointmarkFeature(Feature) - Method in interface nxopen.weld.WeldManager: Creates a JointmarkBuilder object from a single element feature.
editSinglePointMarkFeature(PointMarkPoint) - Method in interface nxopen.weld.WeldManager: Creates a PointMarkBuilder object from a single element feature.
editSizeChoice() - Method in interface nxopen.die.QuickBinderWrapBuilder: Returns the edit size choice
License requirements: None.
editSketch() - Method in interface nxopen.features.sheetmetal.FlangeBuilder: Edit the sketch base on a new edge you need to call SetEdge to set a new edge
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB") OR nx_ship_detail ("Ship Detail Design")
.
editSlotType(Tag, UFModl.SlotType) - Method in interface nxopen.uf.UFModl: Refer to UF_MODL_edit_slot_type for documentation.
editSmbend(Tag, UFModl.SmbendData) - Method in interface nxopen.uf.UFModlSmd: Refer to UF_MODL_edit_smbend for documentation.
editSmbendCorner(Tag, UFModl.SmbendCornerData) - Method in interface nxopen.uf.UFModlSmd: Refer to UF_MODL_edit_smbend_corner for documentation.
editSmbendCylinder(Tag, UFModl.SmbendCylinderData) - Method in interface nxopen.uf.UFModlSmd: Refer to UF_MODL_edit_smbend_cylinder for documentation.
editSmcorner(Tag, UFModl.SmcornerData) - Method in interface nxopen.uf.UFModlSmd: Refer to UF_MODL_edit_smcorner for documentation.
editSmcutout(Tag, UFModl.SmcutoutData) - Method in interface nxopen.uf.UFModlSmd: Refer to UF_MODL_edit_smcutout for documentation.
editSmdFlange(Tag, UFModl.FlangeData) - Method in interface nxopen.uf.UFModlSmd: Refer to UF_MODL_edit_smd_flange for documentation.
editSmhole(Tag, UFModl.SmholeData) - Method in interface nxopen.uf.UFModlSmd: Refer to UF_MODL_edit_smhole for documentation.
editSmpunch(UFModl.SmpunchData, Tag) - Method in interface nxopen.uf.UFModlSmd: Refer to UF_MODL_edit_smpunch for documentation.
editSmslot(Tag, UFModl.SmslotData) - Method in interface nxopen.uf.UFModlSmd: Refer to UF_MODL_edit_smslot for documentation.
editSnipSurfaceFeature(UFModl.SnipsrfFeatureData, Tag) - Method in interface nxopen.uf.UFModlFeatures: Refer to UF_MODL_edit_snip_surface_feature for documentation.
editSolidPunch(Tag, UFModl.SolidPunchData) - Method in interface nxopen.uf.UFModlSmd: Refer to UF_MODL_edit_solid_punch for documentation.
editSolverParameters(UFMotion.SolverParameters) - Method in interface nxopen.uf.UFMotion: Refer to UF_MOTION_edit_solver_parameters for documentation.
editSpline(NXObject) - Method in interface nxopen.features.StudioSplineBuilderEx: Sets a non-parametric spline for editing
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
editSplineDefiningPoints(Spline, double[]) - Method in interface nxopen.Sketch: Changes the locations of the defining points of a spline.
editSplineFeature(Tag, Tag) - Method in interface nxopen.uf.UFCurve: Refer to UF_CURVE_edit_spline_feature for documentation.
editSplinePoles(Spline, double[]) - Method in interface nxopen.Sketch: Changes the locations of the control poles of a spline.
editSplineThruPts(Tag, int, int, int, UFCurve.PtSlopeCrvatr[], double[], int) - Method in interface nxopen.uf.UFCurve: Refer to UF_CURVE_edit_spline_thru_pts for documentation.
editStartEndPoints(boolean) - Method in interface nxopen.cam.InspectionPathBuilder: Edit first or last point in safe plane
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
editStationNum() - Method in interface nxopen.tooling.ScrapDesignBuilder: Returns the station number to lay out in strip
License requirements: None.
EditStockBuilder - Interface in nxopen.features.shipdesign: Used to create a EditStockBuilder which is used to change the stock information on the basic design features.
editStockOffsetPoint(Point, Direction, String, SmartObject.UpdateOption) - Method in interface nxopen.PointCollection: Edits an existing Routing "Stock Offset" point with new information.
editStockSizeAttr(NXObject) - Method in interface nxopen.tooling.StockSizeBuilder: Add or edit stock size attributes.
editStringParameter(String, String) - Method in interface nxopen.mechatronics.ParameterStockBuilder: Edits String parameter.
editStringParameter(String, String, String) - Method in interface nxopen.mechatronics.TagTableBuilder: Edits String parameter.
editStycorner(UFModl.StycornerData, Tag) - Method in interface nxopen.uf.UFModlFeatures: Refer to UF_MODL_edit_stycorner for documentation.
editSubdivFace(int, Tag, Tag, Tag, double[]) - Method in interface nxopen.uf.UFModeling: Refer to UF_MODL_edit_subdiv_face for documentation.
EditSubopCommand - Interface in nxopen.cam: Represents an Edit Subop Command Builder .
EditSubopCommand.ContainmentTypes - Class in nxopen.cam: Available types for containment
EditSubopCommand.PointTypes - Class in nxopen.cam: Available types for point
editSweepCurves(Tag, int, Tag[], int, Tag[], int, Tag[], int, Tag[]) - Method in interface nxopen.uf.UFModl: Refer to UF_MODL_edit_sweep_curves for documentation.
editSxlineDisplay(Tag, UFDraw.ArrowParms, UFDraw.SxlineDisplay) - Method in interface nxopen.uf.UFDraw: Refer to UF_DRAW_edit_sxline_display for documentation.
editSymbolDisplayBuilder(BaseCustomSymbol) - Method in interface nxopen.annotations.CustomSymbolCollection: Creates a edit custom symbol dialog builder
License requirements: None.
EditSymbolDisplayBuilder - Interface in nxopen.annotations: Represents a EditSymbolPieces builder
To create a new instance of this class, use CustomSymbolCollection.editSymbolDisplayBuilder(nxopen.annotations.BaseCustomSymbol)
Default values.
EditSymbolDisplayBuilder.FontTypes - Class in nxopen.annotations: The Enum represent font types.
EditSymbolDisplayBuilder.WidthTypes - Class in nxopen.annotations: The Enum represent width types EditSymbolDisplayBuilder.width() and EditSymbolDisplayBuilder.setWidth(nxopen.annotations.EditSymbolDisplayBuilder.WidthTypes) will set this width type at builder side and will be used to apply the same on the selected contents after commit
editSymbThread(Tag, UFModl.SymbThreadData) - Method in interface nxopen.uf.UFModeling: Refer to UF_MODL_edit_symb_thread for documentation.
editSymbThread2(Tag, boolean, UFModl.SymbThreadData) - Method in interface nxopen.uf.UFModl: Deprecated.
The equivalent Open C method has retired
editTableVariables(FieldVariable[], FieldVariable[]) - Method in interface nxopen.fields.FieldTable: Edit the table field dependent variables.
editTaperFromEdges(Tag, int, Tag, String, boolean, int, Tag[], double, double) - Method in interface nxopen.uf.UFModlFeatures: Refer to UF_MODL_edit_taper_from_edges for documentation.
editTarget(String) - Method in interface nxopen.ame.AMEManager: Set the target to be edited, target can be Type or Template, targetID is the DB id from the Teamcenter
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
editTemplateExpression() - Method in interface nxopen.tooling.RunnerBuilder: Edits expressions of runner section.
EditTitleBlockBuilder - Interface in nxopen.annotations: Represents a EditTitleBlockBuilder builder
To create a new instance of this class, use TitleBlockCollection.createEditTitleBlockBuilder(nxopen.annotations.TitleBlock[])

Created in NX8.0.0
editTrace(Tag, UFMotion.Trace) - Method in interface nxopen.uf.UFMotion: Refer to UF_MOTION_edit_trace for documentation.
editTranslation(double[], double[]) - Method in interface nxopen.uf.UFMtx4: Refer to UF_MTX4_edit_translation for documentation.
editTrimCurve(Tag, Tag, double[], double[], int) - Method in interface nxopen.uf.UFCurve: Refer to UF_CURVE_edit_trim_curve for documentation.
editType() - Method in interface nxopen.die.QuickBinderBuilder: Returns the type edit to be performed on the face or edge.
editType() - Method in interface nxopen.drawings.SectionInViewBuilder: Returns the type
License requirements: None.
editUserdefMidsrf(UFSf.MidsrfUserParms, Tag) - Method in interface nxopen.uf.UFSf: Refer to UF_SF_edit_userdef_midsrf for documentation.
editUVPercentage(double, double) - Method in interface nxopen.geometricutilities.BridgeCurveConnectivity: Edits parameter percentage of a representative point on face
License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_1 ("basic freeform modeling")
.
editVariablePointData(Edge, int, String, String, String, String, Point, boolean, boolean) - Method in interface nxopen.features.EdgeBlendBuilder: Edit an edge blend variable radius data for an edge in the edge blend
License requirements: solid_modeling ("SOLIDS MODELING")
.
editVariableRadiusData(Edge, int, double, String, Point, boolean) - Method in interface nxopen.features.EdgeBlendBuilder: Deprecated.
Deprecated in NX6.0.0. Use EdgeBlendBuilder.editVariableRadiusDataNew(nxopen.Edge, int, java.lang.String, java.lang.String, nxopen.Point, boolean) instead.
editVariableRadiusDataNew(Edge, int, String, String, Point, boolean) - Method in interface nxopen.features.EdgeBlendBuilder: Edit an edge blend variable radius data for an edge in the edge blend
License requirements: solid_modeling ("SOLIDS MODELING")
.
editVariableRadiusDataNew(Edge, int, String, String, Point, boolean, boolean) - Method in interface nxopen.features.EdgeBlendBuilder: Edit an edge blend variable radius data for an edge in the edge blend
License requirements: solid_modeling ("SOLIDS MODELING")
.
editView(ModelingView) - Method in interface nxopen.display.DynamicSectionBuilder: Edits the section object in the modeling view.
EditViewLabelSettingsBuilder - Interface in nxopen.drawings: Represents a EditViewLabelSettingsBuilder builder.
editViewLight(String, UFView.LightAttributes) - Method in interface nxopen.uf.UFView: Refer to UF_VIEW_edit_view_light for documentation.
EditViewSettingsBuilder - Interface in nxopen.drawings: Represents a EditViewSettingsBuilder builder.
editVisualReport(VisualReport) - Method in interface nxopen.visualreporting.VisualReportBuilder: Starts editing a VisualReport .
EditWeldingBuilder - Interface in nxopen.features.shipdesign: Used to create a EditWeldingBuilder which is used to change the welding characteristics on the seams in the plate systems.
editWeldSymbol(Tag, UFDrf.WeldSymbols) - Method in interface nxopen.uf.UFDrf: Refer to UF_DRF_edit_weld_symbol for documentation.
editWidths() - Method in interface nxopen.PlotColorsWidthsBuilder: Edit drawing sheet widths
License requirements: None.
EditWithRollbackManager - Interface in nxopen.features: Represents an object that stores transient data during Edit with Rollback of a feature.
editWithRollbackUponDoubleClick() - Method in interface nxopen.preferences.SessionModeling: Returns the option "Edit with Rollback upon Double-Click" gives choice of what action to be taken on feature upon Double clicking, either in partnavigator or in Graphics widow.
editWithTemplate(Tag, Tag) - Method in interface nxopen.uf.UFCurve: Refer to UF_CURVE_edit_with_template for documentation.
editWithUnits(Expression, Unit, String) - Method in interface nxopen.ExpressionCollection: Edits an expression with units.
editWrapAssembly(Tag, UFModl.WrapAssem) - Method in interface nxopen.uf.UFModeling: Refer to UF_MODL_edit_wrap_assembly for documentation.
editWrapGeometry(Tag, UFModl.WrapGeom) - Method in interface nxopen.uf.UFModeling: Refer to UF_MODL_edit_wrap_geometry for documentation.
editWrapObject(UFCurve.WrapData, Tag) - Method in interface nxopen.uf.UFCurve: Refer to UF_CURVE_edit_wrap_object for documentation.
EDM_TEMPLATE1 - Static variable in class nxopen.tooling.EWDraftingBuilder.EDMTemplateOption: template1
EDM_TEMPLATE2 - Static variable in class nxopen.tooling.EWDraftingBuilder.EDMTemplateOption: template2
edmOption() - Method in interface nxopen.tooling.EWDraftingBuilder: Returns the option to create edm sheet type drafting or not.
edmTemplate() - Method in interface nxopen.tooling.EWDraftingBuilder: Returns the template of edm sheet type to create drafting.
eendiantype - Variable in class nxopen.mechatronics.SHMSignalClientBuilder.SHMInstanceData
EF_CONN - Static variable in class nxopen.uf.UFSf.ElementType
EfConnInfo() - Constructor for class nxopen.uf.UFSf.EfConnInfo
EfConnInfo(Tag, UFSf.Sf1dDensityType, double, int, int, Tag[], int, Tag[]) - Constructor for class nxopen.uf.UFSf.EfConnInfo
effect() - Method in interface nxopen.motion.JointFrictionAdams: Returns the effect
License requirements: mechanisms ("MECHANISMS")
.
effect() - Method in interface nxopen.motion.JointFrictionRecurDyn: Returns the effect
License requirements: mechanisms ("MECHANISMS")
.
effectDistBuilder() - Method in interface nxopen.cam.NcmPlanarEngRetBuilder: Returns the engage/retract effect dist builder (inheritable tool dep)
License requirements: None.
effectDistBuilder() - Method in interface nxopen.cam.NcmScEngRetBuilder: Returns the engage/retract effect dist builder (inheritable tool dep)
License requirements: None.
EFFECTIVE_EMISSIVITY - Static variable in class nxopen.cae.Result.Quantity
effectiveContactDepth() - Method in interface nxopen.motion.AnalyticalContactBuilder: Returns the max penetration depth
License requirements: mechanisms ("MECHANISMS")
.
effectiveStrain() - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder: Returns the effective strain.
effectiveStress() - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder: Returns the effective stress.
EFFECTIVITY - Static variable in class nxopen.assemblies.DesignElementBuilder.EditActionType
effectivity() - Method in interface nxopen.assemblies.DesignElementBuilder: Deprecated.
Deprecated in NX9.0.0. Use DesignElementBuilder.effectivityTable() instead.
effectivity() - Method in interface nxopen.assemblies.SubsetConfigurationBuilder: Returns the effectivity for use in searches for the contents of the Subset .
EffectivityAttributePropertiesBuilder - Interface in nxopen.pdm: Represents an EffectivityAttributePropertiesBuilder to be used for creating effectivity attributes.
EffectivityConditionBuilder - Interface in nxopen: Represent a utility class to assign or edit discrete and range effectivity unit values in the context of a CollaborativeDesign .
EffectivityConditionBuilder.EffectivityConditionType - Class in nxopen: Specifies the effectivity type option
EffectivityConditionBuilder.ToUnitType - Class in nxopen: Specifies option for range effectivity value's toUnit.
effectivityFormula() - Method in interface nxopen.BasicEffectivityBuilder: Returns the string representation of effectivity
License requirements: None.
effectivityFormula() - Method in interface nxopen.EffectivityConditionBuilder: Returns the string representation of effectivity
License requirements: None.
effectivityFormula() - Method in interface nxopen.pdm.ConditionalElementRevision: Returns the formula string that represents the effectivity of this object in database.
effectivityFormula() - Method in interface nxopen.pdm.ModelElementRevision: Returns the formula string that represents the effectivity of this object in database.
effectivityTable() - Method in interface nxopen.assemblies.DesignElementBuilder: Returns the effectivity interface of a design element
License requirements: None.
effectivityTable() - Method in interface nxopen.pdm.ConfigurationContextBuilder: Returns the EffectivityTableBuilder builder used to edit the effectivity
License requirements: None.
effectivityTableBuilder() - Method in interface nxopen.pdm.EffectivityAttributePropertiesBuilder: Returns the effectivity table builder.
EffectivityTableBuilder - Interface in nxopen.pdm: Represents a builder class for effectivity configuration.
EffectivityTableRow - Interface in nxopen.pdm: Represents the class that contains effectivity parameters.
effectivityType() - Method in interface nxopen.EffectivityConditionBuilder: Returns the effectivity type
License requirements: None.
EGG_BOX - Static variable in class nxopen.features.shipdesign.AlongGuideCutBuilder.CreationMethod: Only type to create basic design eggbox - added in NX12.0
EGG_BOX_BOTTOM - Static variable in class nxopen.features.shipdesign.AlongGuideCutBuilder.CreationMethod: Egg box bottom cut type - added in NX11
EGG_BOX_TOP - Static variable in class nxopen.features.shipdesign.AlongGuideCutBuilder.CreationMethod: Egg box top cut type - added in NX11
EGGBOX - Static variable in class nxopen.features.shipdesign.SeamBuilder.Types: EggBox seam, used to create eggbox feature - added in nx12.0
EHEX8 - Static variable in class nxopen.cae.connections.ElementType: Hex8
EHEX8SPIDER - Static variable in class nxopen.cae.connections.ElementType: Hex8 + Spider
eid - Variable in class nxopen.DisplayManager.J3dData: NX identifier for this shape
eid - Variable in class nxopen.uf.UF.List
eid - Variable in class nxopen.uf.UFDisp.J3dEntity
eid - Variable in class nxopen.uf.UFModl.ParentDispInfo
eid - Variable in class nxopen.uf.UFModlGeneral.CreateBsurfaceData
eids - Variable in class nxopen.uf.UFModeling.AskFeatObjectData
EIGEN_VALUE - Static variable in class nxopen.cae.ResultProbeBuilder.IterationType
EIGENVALUE - Static variable in class nxopen.cae.BaseIteration.IterationValueType: Value represents a Eigenvalue
eigenvalueParameters() - Method in interface nxopen.cae.optimization.TBSTopologySensitivityOptimizationParameters: Returns the eigenvalue optimization control parameters
License requirements: None.
EIGHT - Static variable in class nxopen.annotations.AutomaticCenterlineBuilder.CenterlineThickness: Width Eight
EIGHT - Static variable in class nxopen.annotations.CenterlineSettingsBuilder.CenterlineThickness: Width Eight
EIGHT - Static variable in class nxopen.annotations.FractionDenominatorFormat
EIGHT - Static variable in class nxopen.annotations.IntersectionSymbolBuilder.Thickness: Width Eight
EIGHT - Static variable in class nxopen.annotations.LineWidth: Width Eight
EIGHT - Static variable in class nxopen.annotations.OffsetCenterPointBuilder.Thickness: Width Eight
EIGHT - Static variable in class nxopen.annotations.TargetPointBuilder.Thickness: Width Eight
EIGHT - Static variable in class nxopen.cae.FluidDomainBuilder.SubdivisionType
EIGHT - Static variable in class nxopen.cae.ModelDisplayBuilder.FreeEdgeWidth
EIGHT - Static variable in class nxopen.cae.ModelDisplayBuilder.RotationAxisWidth
EIGHT - Static variable in class nxopen.cae.ModelDisplayBuilder.StitchedEdgeWidth
EIGHT - Static variable in class nxopen.display.GridBuilder.LineWeightType
EIGHT - Static variable in class nxopen.DisplayableObject.ObjectWidth
EIGHT - Static variable in class nxopen.drawings.CustomViewSettingsBuilder.Width: Eight
EIGHT - Static variable in class nxopen.drawings.DrawingCompareSettingsBuilder.WidthType: Deprecated.

Width Eight
EIGHT - Static variable in class nxopen.features.vehicledesign.PedestrianProtectionBuilder.Width
EIGHT - Static variable in class nxopen.fields.DisplayPropertiesBuilder.LineWidthEnum
EIGHT - Static variable in class nxopen.geometricanalysis.FaceAnalysisDisplayBuilder.ColorsOptions: Display in 8 colors.
EIGHT - Static variable in class nxopen.geometricanalysis.ReflectionAnalysisBuilder.NumberOfLinesOptions: 8 reflection line.
EIGHT - Static variable in class nxopen.preferences.ViewVisualizationVisual.SmoothEdgeWidth
EIGHT - Static variable in class nxopen.preferences.Width: Width Eight
EIGHT - Static variable in class nxopen.ViewDependentDisplayManager.Width
EIGHTH - Static variable in class nxopen.weld.WeldGroupIdColor: Eighth Group Id Color Index
EINTERPOLATION_SPIDER - Static variable in class nxopen.cae.connections.ElementType: Interpolation + Spider
eIOType - Variable in class nxopen.mechatronics.MATLABClientBuilder.TagInfo: IO type
eIOType - Variable in class nxopen.mechatronics.OPCClientBuilder.TagInfo: IO type
eIOType - Variable in class nxopen.mechatronics.OPCUAClientBuilder.TagInfo: IO type
eIOType - Variable in class nxopen.mechatronics.PlcSimAdvClientBuilder.TagInfo: IO type
eIOType - Variable in class nxopen.mechatronics.ProfinetClientBuilder.TagInfo: Signal IO Type
eIOType - Variable in class nxopen.mechatronics.SHMSignalClientBuilder.SHMSignal: Signal IO Type
eIOType - Variable in class nxopen.mechatronics.SignalBuilder.Signal: IO type
eIOType - Variable in class nxopen.mechatronics.SymbolTableBuilder.Symbol: IO type
eIOType - Variable in class nxopen.mechatronics.TCPClientBuilder.Signal: Signal IO type
eIOType - Variable in class nxopen.mechatronics.UDPSignalClientBuilder.Signal: IO type
ejectionStartAngle() - Method in interface nxopen.tooling.MotionSimulationBuilder: Returns the hydraulic motion angle
License requirements: None.
ejectorDrawingType() - Method in interface nxopen.tooling.EjectorTableBuilder: Returns the drawing type.
ejectorMoveOption() - Method in interface nxopen.tooling.MotionSimulationBuilder: Returns the ejector move option
License requirements: None.
ejectorPins() - Method in interface nxopen.tooling.EjectorTableBuilder: Returns the ejector pins.
ejectorPinType() - Method in interface nxopen.tooling.EjectorTableBuilder: Returns the ejector pin type.
EjectorPostProcessingBuilder - Interface in nxopen.tooling: Represents a builder to be used to create Mold Wizard ejector post processing.
EjectorPostProcessingBuilder.TrimMethod - Class in nxopen.tooling: The processing type: Trim, Adjust length and Untrim.
EjectorPostProcessingBuilder.TrimPartName - Class in nxopen.tooling: The trim part where to find a trim surface as tool to trim ejector pins.
EjectorPostProcessingBuilder.TrimSufaceName - Class in nxopen.tooling: The trim surface types.
EjectorPostProcessingCollection - Interface in nxopen.tooling: Creates a EjectorPostProcessingCollection class
To obtain an instance of this class, refer to ToolingManager

Created in NX7.0.0
ejectorPostProcessings() - Method in interface nxopen.tooling.ToolingManager: Returns the EjectorPostProcessingCollection instance belonging to this part .
EjectorTableBuilder - Interface in nxopen.tooling: Represens a ejector table builder.
EjectorTableBuilder.DrawingType - Class in nxopen.tooling: The types of the ejector drawing.
EjectorTableBuilder.EjectorType - Class in nxopen.tooling: The types of ejectors.
EjectorTableData - Interface in nxopen.tooling: Represents the ejector table data in Ejector Table Builder.
EKINEMATIC - Static variable in class nxopen.cae.connections.ElementType: Kinematic Elm
ELASTIC - Static variable in class nxopen.cae.aerostructures.author.ABB.MaterialBehaviour: Elastic behaviour
ELASTIC - Static variable in class nxopen.cae.responsesimulation.DDAMComponentData.ResponseType
ELASTIC - Static variable in class nxopen.cae.responsesimulation.DDAMExcitation.ResponseType
ELASTIC_ELEM_RESULTANT_STRAIN_BEAM - Static variable in class nxopen.cae.Result.Quantity
ELASTIC_ELEM_RESULTANT_STRAIN_SHELL - Static variable in class nxopen.cae.Result.Quantity
ELASTIC_ELEM_RESULTANT_STRAIN_SPRING_DASHPOT - Static variable in class nxopen.cae.Result.Quantity
ELASTIC_PLASTIC - Static variable in class nxopen.cae.aerostructures.author.ABB.MaterialBehaviour: Elastic-plastic behaviour
ELASTIC_PLASTIC - Static variable in class nxopen.cae.responsesimulation.DDAMComponentData.ResponseType
ELASTIC_PLASTIC - Static variable in class nxopen.cae.responsesimulation.DDAMExcitation.ResponseType
ELASTIC_STRAIN - Static variable in class nxopen.cae.Result.Quantity
ELASTIC_STRAIN_AT_ELEMENT_INTEGRATION_POINT - Static variable in class nxopen.cae.Result.Quantity
ELASTIC_STRAIN_VON_MISES - Static variable in class nxopen.cae.Result.Quantity
elasticModulus() - Method in interface nxopen.features.sheetmetal.MetaformBuilder: Returns the elastic modulus
License requirements: None.
ELBOW_FINGERTIP_LENGTH - Static variable in class nxopen.HumanData.AdvancedScalingType: Indicate scaling of elbow_fingertip_length
ELBOW_REST_HEIGHT - Static variable in class nxopen.HumanData.AdvancedScalingType: Indicate scaling of elbow_rest_height
ElbowSnapSettings - Interface in nxopen.routing: Helper object used the by LinearPathBuilder builder.
elbowSnapSettings() - Method in interface nxopen.routing.LinearPathBuilder: Returns the elbow snapping settings for determining location of control points as the user drags their mouse.
ELECTRIC_CURRENT - Static variable in class nxopen.cae.XyFunctionMeasure: Electric current unit
ELECTRIC_CURRENT - Static variable in class nxopen.motion.GraphBuilder.ComponentChoices: Deprecated.

Electric Current
ELECTRIC_CURRENT_A - Static variable in class nxopen.cae.XyFunctionUnit: Electric Current unit: A
ELECTRIC_CURRENT_MA - Static variable in class nxopen.cae.XyFunctionUnit: Electric Current unit: mA
ELECTRIC_CURRENT_MICROA - Static variable in class nxopen.cae.XyFunctionUnit: Electric Current unit: microA
ELECTRIC_FIELD_STRENGTH - Static variable in class nxopen.cae.Result.Quantity
ELECTRIC_FLUX_DENSITY - Static variable in class nxopen.cae.Result.Quantity
ELECTRIC_POTENTIAL - Static variable in class nxopen.cae.Result.Quantity
ELECTRIC_TORQUE - Static variable in class nxopen.motion.GraphBuilder.ComponentChoices: Deprecated.

Electric Torque
ELECTRICAL - Static variable in class nxopen.preferences.RoutingApplicationView.AppType: In routing electrical application.
ELECTRICAL_RESISTANCE - Static variable in class nxopen.cae.Result.Quantity
ELECTRICAL_RESISTIVITY - Static variable in class nxopen.cae.Result.Quantity
ElectricalAnnotationSettingsBuilder - Interface in nxopen.ame: JA class for the Electrical Annotation Settings dialog
To create a new instance of this class, use AMEManager.createElectricalAnnotationSettingsBuilder(nxopen.Part)

Created in NX11.0.0
ElectricalAnnotationSettingsBuilder.AnnotationAttrType - Class in nxopen.ame: Represents the type of annotations
electricalConnections() - Method in interface nxopen.routing.RouteManager: Routing Electrical Connection collection .
ElectricalConnectionSettingsBuilder - Interface in nxopen.ame: Builder object for changing electrical connection settings on diagramming pages associated with the Project .
ElectricalDeviceRelationship - Interface in nxopen.routing.electrical: Represents a relationship between Routing Electrical devices.
ElectricalDeviceRelationshipCollection - Interface in nxopen.routing.electrical: Represents a collection of ElectricalDeviceRelationship objects.
electricalDeviceRelationships() - Method in interface nxopen.routing.RouteManager: ElectricalDeviceRelationship Connection collection .
ElectricalFormat - Interface in nxopen.routing.electrical: Represents a Routing Electrical ElectricalFormat.
ElectricalFormat.Type - Class in nxopen.routing.electrical: Describes how system reports the lengths of the stock.
ElectricalFormatCollection - Interface in nxopen.routing.electrical: Represents a Routing ElectricalFormatCollection object.
electricalFormats() - Method in interface nxopen.routing.RouteManager: Routing Electrical Format collection .
ElectricalNavigatorFilter - Interface in nxopen.routing.electrical: Represents a Routing Electrical Navigator Filter object.
ElectricalNavigatorFilterCollection - Interface in nxopen.routing.electrical: Represents a Routing ElectricalNavigatorFilterCollection object.
electricalNavigatorFilters() - Method in interface nxopen.routing.RouteManager: Routing Electrical Filter collection .
ElectricalPart - Interface in nxopen.mechatronics: Electrical Part holds the part attributes for communicating with EPLAN.
ElectricalPartBuilder - Interface in nxopen.mechatronics: Represents a ElectricalPart builder
To create a new instance of this class, use ElectricalPartCollection.createElectricalPartBuilder(nxopen.mechatronics.ElectricalPart)

Created in NX9.0.0
ElectricalPartBuilder.Attribute - Class in nxopen.mechatronics: Defined Attribute Structure
ElectricalPartCollection - Interface in nxopen.mechatronics: Represents a ElectricalPartCollection
To obtain an instance of this class, refer to MechatronicsManager

Created in NX9.0.0
electricalPartCollection() - Method in interface nxopen.mechatronics.MechatronicsManager: Returns the ElectricalPartCollection instance belonging to this part .
ElectricalPartDefinitionShadow - Interface in nxopen.routing.electrical: Represents ElectricalPartDefinitionShadow object
Creator not available in KF.
ElectricalStockDefinition - Interface in nxopen.routing.electrical: Represents ElectricalStockDefinition object
Creator not available in KF.
ElectricalStockDefinition.SectionType - Class in nxopen.routing.electrical: Stock section type.
ElectricalStockDevice - Interface in nxopen.routing.electrical: The Electrical Stock Device is a non instantiable superclass to classify all electrical stock-based single devices.
electricalStockDevice() - Method in interface nxopen.routing.RouteManager: ElectricalStockDevice collection .
ElectricalStockDevice.AutoRouteSel - Class in nxopen.routing.electrical: Auto-route selections.
ElectricalStockDevice.RouteLevel - Class in nxopen.routing.electrical: Routing level.
ElectricalStockDevice.RouteTypes - Class in nxopen.routing.electrical: Route types (manual/auto).
ElectricalStockDeviceCollection - Interface in nxopen.routing.electrical: Represents a collection of ElectricalStockDevice (ESD) objects.
ElectricalStockDeviceCollection.AutoRouteConnectionsData - Class in nxopen.routing.electrical: This class holds the data returned from ElectricalStockDeviceCollection.autoRouteConnections(nxopen.routing.electrical.ElectricalStockDevice.RouteLevel, nxopen.routing.electrical.ElectricalStockDevice.AutoRouteSel, nxopen.routing.electrical.ElectricalStockDevice[])
electrode() - Method in interface nxopen.tooling.ElectrodeCheckingBuilder: Returns the electrode part to be checked with the workpiece part.
ELECTRODE_WIZARD - Static variable in class nxopen.tooling.ToolingApplication: Electrode Wizard
ElectrodeBlankBuilder - Interface in nxopen.tooling: Design electrode blank builder to create an electrode blank for the selected body.
electrodeBlankBuilder() - Method in interface nxopen.tooling.ElectrodeCopyBuilder: Returns the electrode blank builder.
ElectrodeBlankBuilder.BlankMaterial - Class in nxopen.tooling: Represents the blank material option.
ElectrodeBlankBuilder.BlankShape - Class in nxopen.tooling: Represents the electrode blank shape option.
ElectrodeBlankBuilder.JointObject - Class in nxopen.tooling: Represents the transition type between head bodies and the blank.
electrodeBodies() - Method in interface nxopen.tooling.UndersizeBuilder: Returns the electrode body to do undersize
License requirements: None.
ElectrodeCheckingBuilder - Interface in nxopen.tooling: Electrode Checking builder to check the touch status of all electrode.
ElectrodeComponentBuilder - Interface in nxopen.tooling: Electrode component builder to install holder and pallet.
ElectrodeComponentBuilder.Chuck - Class in nxopen.tooling: Represents the electrode chuck type.
ElectrodeCopyBuilder - Interface in nxopen.tooling: The ElectrodeCopy builder
To create a new instance of this class, use ElectrodeCopyCollection.createElectrodeCopyBuilder()
Default values.
ElectrodeCopyBuilder.Copy - Class in nxopen.tooling: Represents an index to copy type
ElectrodeCopyBuilder.UpdateParameterData - Class in nxopen.tooling: This class holds the data returned from ElectrodeCopyBuilder.updateParameterData(nxopen.TaggedObject, nxopen.TaggedObject)
ElectrodeCopyCollection - Interface in nxopen.tooling: Represents a collection of ElectrodeCopy builder
To obtain an instance of this class, refer to ToolingManager

Created in NX6.0.0
electrodeCopys() - Method in interface nxopen.tooling.ToolingManager: Returns the ElectrodeCopyCollection instance belonging to this part .
ElectrodeDeleteBuilder - Interface in nxopen.tooling: Electrode delete component builder to remove blank, pallet and holder from assembly.
ElectrodeDeleteBuilder.Types - Class in nxopen.tooling: delete sparking solid from blank or delete blank, pallet or holder directly.
ElectrodeDesign - Interface in nxopen.tooling: Represents an Electrode Design.
electrodeDesign() - Method in interface nxopen.tooling.ToolingManager: Returns the ElectrodeDesignCollection instance belonging to this part .
ElectrodeDesignCollection - Interface in nxopen.tooling: Represents a collection of Electrode Design.
ElectrodeInitializationBuilder - Interface in nxopen.tooling: Electrode initialize project builder to creates an electrode design assembly.
ElectrodeInitializationBuilder.Method - Class in nxopen.tooling: The initialize type: Original, No Working Part, No Machine Set Part and No Template.
ElectrodeInitializationBuilder.Type - Class in nxopen.tooling: Clone a member of an electrode assembly, such as top part, machine set part, and working part.
electrodeNameFilter() - Method in interface nxopen.tooling.ElectrodeCheckingBuilder: Returns the wildcard string to filter out the electrode part name.
ELEM - Static variable in class nxopen.cae.QueryCurvePost.EntityType
ELEM0D - Static variable in class nxopen.cae.GroupElemMethodElemOption.ElemOption: return 0D elements in the group
ELEM1D - Static variable in class nxopen.cae.GroupElemMethodElemOption.ElemOption: return 1D elements in the group
ELEM2D - Static variable in class nxopen.cae.GroupElemMethodElemOption.ElemOption: return 2D elements in the group
ELEM3D - Static variable in class nxopen.cae.GroupElemMethodElemOption.ElemOption: return 3D elements in the group
ELEM_ALL - Static variable in class nxopen.cae.GroupElemMethodElemOption.ElemOption: return all elements in the group
ELEM_COLL - Static variable in class nxopen.cae.ModelDisplayBuilder.ElmClrBasis: Mesh
ELEM_COLL_CONTAINER - Static variable in class nxopen.cae.ModelDisplayBuilder.ElmClrBasis: Mesh Collector
ELEM_NORMAL - Static variable in class nxopen.cae.ElementExtrudeBuilder.MethodType: along element normal
ELEM_NORMAL - Static variable in class nxopen.cae.ElementProjectBuilder.MethodType: along element normal
ELEM_NORMAL - Static variable in class nxopen.cae.ElementRotateBuilder.MethodType: translate along element normal
ELEM_NORMAL - Static variable in class nxopen.cae.ElementTranslateBuilder.MethodType: translate along element normal
ELEM_QUALITY_CHECK - Static variable in class nxopen.cae.ModelDisplayBuilder.ElmClrBasis: Element Quality Check
ELEM_RESULTANT_CREEP - Static variable in class nxopen.cae.Result.Quantity
ELEM_RESULTANT_CREEP_BEAM - Static variable in class nxopen.cae.Result.Quantity
ELEM_RESULTANT_CREEP_SHELL - Static variable in class nxopen.cae.Result.Quantity
ELEM_RESULTANT_CREEP_SPRING_DASHPOT - Static variable in class nxopen.cae.Result.Quantity
ELEM_RESULTANT_STRAIN_CREEP_BEAM - Static variable in class nxopen.cae.Result.Quantity
ELEM_RESULTANT_STRAIN_CREEP_SHELL - Static variable in class nxopen.cae.Result.Quantity
ELEM_RESULTANT_STRAIN_CREEP_SPRING_DASHPOT - Static variable in class nxopen.cae.Result.Quantity
elemAssociatedDataUtils() - Method in interface nxopen.cae.NodeElementManager: Returns the element associated data access utility .
elemAssoErrorList - Variable in class nxopen.uf.UFSf.MeshErrorContainer
ELEMEDGE1D - Static variable in class nxopen.cae.GroupElemMethodElemOption.ElemOption: return 1D elements in the group as element edges
ELEMEDGE_TO_ELEMFACE - Static variable in class nxopen.cae.CAEConnectionBuilder.ConnectionTypeEnum: between element edges and faces
ElemEdgefaceObject - Class in nxopen.cae: Structure used to retrieve list of Element Edges or Element Faces in a group
ElemEdgefaceObject() - Constructor for class nxopen.cae.ElemEdgefaceObject
ElemEdgefaceObject(FEElement, CaeGroupElementSubType, int) - Constructor for class nxopen.cae.ElemEdgefaceObject: Constructor for the ElemEdgefaceObject object.
ElemEdgePathMethod - Interface in nxopen.cae: Represents a ElemEdgePathMethod .
ElemEdgePathMethod.PathEdgesData - Class in nxopen.cae: This class holds the data returned from ElemEdgePathMethod.getPathEdges()
ElemEdgePathMethod.SeedEdgesData - Class in nxopen.cae: This class holds the data returned from ElemEdgePathMethod.getSeedEdges()
ElemEdgePathMethod.SeedsData - Class in nxopen.cae: This class holds the data returned from ElemEdgePathMethod.getSeeds()
element() - Method in interface nxopen.annotations.ShipDimensionBuilder: Returns the element
License requirements: None.
element - Variable in class nxopen.bodydes.OnestepUnformBuilder.MeshesData
ELEMENT - Static variable in class nxopen.cae.aerostructures.author.InputLoad.LoadSupportType: Element (the method has to aggregated values that have been extracted per element, GetValues() will return a table of values)
ELEMENT - Static variable in class nxopen.cae.CaeGroupCollection.EntityType
ELEMENT - Static variable in class nxopen.cae.CaeSetGroupFilterType: fitler type is any element
Element - Interface in nxopen.cae.connections: This is the class to access a connection element
To obtain an instance of this object use the Create creator in ElementCollection .
element() - Method in interface nxopen.cae.ElementConnectivityBuilder: Returns a selected element whose connectivity is to be modified.
element() - Method in interface nxopen.cae.ElementDeleteBuilder: Returns the selected elements to be deleted
License requirements: None.
element() - Method in interface nxopen.cae.NodeElementInfoBuilder: Returns the selected elements
License requirements: None.
ELEMENT - Static variable in class nxopen.cae.NodeElementInfoBuilder.EntityType: Info on element
ELEMENT - Static variable in class nxopen.cae.optimization.TBSGroupDefinition.GroupElementType: The group contains element
ELEMENT - Static variable in class nxopen.cae.PostGraphBuilder.EntityType
ELEMENT - Static variable in class nxopen.cae.Result.Location
element() - Method in interface nxopen.cae.ThicknessBuilder: Returns the selected elements
License requirements: None.
ELEMENT - Static variable in class nxopen.cae.ThicknessBuilder.EntityType: Info on element
Element() - Constructor for class nxopen.mechatronics.CamProfileBuilder.Element
Element(int, String, int, int, double, double, double, double, double, double, double, double, double, double, double, double, double, double, double, double, double, double, boolean, boolean, boolean, boolean, double, double, int, double, int, double, double) - Constructor for class nxopen.mechatronics.CamProfileBuilder.Element: Constructor for the Element object.
element() - Method in interface nxopen.NXMatrix: Returns the orientation matrix of the coordinate system relative to the absolute coordinate system of the owning part
License requirements: None.
element - Variable in class nxopen.uf.UFKf.ListPopData
ELEMENT_ADAPT_HELMS - Static variable in class nxopen.uf.UFSf.ElmAdaptivityType
ELEMENT_ADAPT_PELMS - Static variable in class nxopen.uf.UFSf.ElmAdaptivityType
ELEMENT_ALL - Static variable in class nxopen.uf.UFSf.ElmDimensionType
ELEMENT_ASPECT_RATIO - Static variable in class nxopen.cae.Result.Quantity
ELEMENT_BEAM - Static variable in class nxopen.uf.UFSf.ElmDimensionType
ELEMENT_COAT - Static variable in class nxopen.cae.ElementTranslateBuilder.CopyType: make 1D element using the existing nodes
ELEMENT_DISTORTION - Static variable in class nxopen.cae.Result.Quantity
ELEMENT_EDGE - Static variable in class nxopen.cae.AttachElementsBuilder.SplitLineOption: split by element edge
ELEMENT_EDGE - Static variable in class nxopen.cae.CaeSetGroupFilterType: filter type is element edge
ELEMENT_EDGE - Static variable in class nxopen.cae.CaeSetObjectSubType: sub type is element edge
ELEMENT_EDGE - Static variable in class nxopen.cae.Result.Location
ELEMENT_EDGE - Static variable in class nxopen.CaeObjectType.CaeSubType: sub type is element edge
ELEMENT_EDGE_NODE - Static variable in class nxopen.cae.Result.Location
ELEMENT_ERROR - Static variable in class nxopen.cae.Result.Quantity
ELEMENT_FACE - Static variable in class nxopen.cae.CaeSetGroupFilterType: filter type is element face
ELEMENT_FACE - Static variable in class nxopen.cae.CaeSetObjectSubType: sub type is element face
ELEMENT_FACE - Static variable in class nxopen.cae.DurabilityStressAxesBuilder.StressAxisMethodEnum: Element Face
ELEMENT_FACE - Static variable in class nxopen.cae.Result.Location
ELEMENT_FACE - Static variable in class nxopen.CaeObjectType.CaeSubType: sub type is element face
ELEMENT_FACE_CENTER - Static variable in class nxopen.cae.responsesimulation.StrainGagePlacementType
ELEMENT_FACE_NODE - Static variable in class nxopen.cae.Result.Location
ELEMENT_FORCE - Static variable in class nxopen.cae.responsesimulation.EvaluationResultType
ELEMENT_FORCE - Static variable in class nxopen.cae.Result.Quantity
ELEMENT_FORCE - Static variable in class nxopen.cae.XyFunctionMeasure: Element force unit
ELEMENT_FORCE_BF_FT - Static variable in class nxopen.cae.XyFunctionUnit: Element Force unit: lbf/ft
ELEMENT_FORCE_BF_IN - Static variable in class nxopen.cae.XyFunctionUnit: Element Force unit: lbf/in
ELEMENT_FORCE_CN_CM - Static variable in class nxopen.cae.XyFunctionUnit: Element Force: Cn/cm
ELEMENT_FORCE_JM2 - Static variable in class nxopen.cae.XyFunctionUnit: Element Force unit: J/m^2
ELEMENT_FORCE_KGF_CM - Static variable in class nxopen.cae.XyFunctionUnit: Element Force: kgf/cm
ELEMENT_FORCE_KGF_M - Static variable in class nxopen.cae.XyFunctionUnit: Element Force: kgf/m
ELEMENT_FORCE_KGF_MM - Static variable in class nxopen.cae.XyFunctionUnit: Element Force: kgf/mm
ELEMENT_FORCE_LEVEL_CROSSING_RATE - Static variable in class nxopen.cae.Result.Quantity
ELEMENT_FORCE_MN_MM - Static variable in class nxopen.cae.XyFunctionUnit: Element Force unit: mN/mm
ELEMENT_FORCE_NM - Static variable in class nxopen.cae.XyFunctionUnit: Element Force unit: N/m
ELEMENT_FORCE_NMM - Static variable in class nxopen.cae.XyFunctionUnit: Element Force unit: N/mm
ELEMENT_FREE_FACE - Static variable in class nxopen.cae.PolygonFaceOnMeshBuilder.PolygonFaceOnMeshType: 3D Element free faces
ELEMENT_FREE_FACE - Static variable in class nxopen.cae.SurfaceCoatBuilder.SelectionMethod: Element free faces
ELEMENT_HEAT_LOAD - Static variable in class nxopen.cae.Result.Quantity
ELEMENT_ID - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.SortingType: Sort results using the element id
ELEMENT_INTEGRATION_POINT_STRAIN - Static variable in class nxopen.cae.Result.Quantity
ELEMENT_INTEGRATION_POINT_STRESS - Static variable in class nxopen.cae.Result.Quantity
ELEMENT_JACOBIAN - Static variable in class nxopen.cae.Result.Quantity
ELEMENT_MAXIMUM - Static variable in class nxopen.cae.responsesimulation.StrengthStressOption
ELEMENT_MOMENT - Static variable in class nxopen.cae.Result.Quantity
ELEMENT_MOMENT - Static variable in class nxopen.cae.XyFunctionMeasure: Element moment unit
ELEMENT_MOMENT_BF_FT - Static variable in class nxopen.cae.XyFunctionUnit: Element Moment unit: lbf-ft/ft
ELEMENT_MOMENT_BF_IN - Static variable in class nxopen.cae.XyFunctionUnit: Element Moment unit: lbf-in/in
ELEMENT_MOMENT_CN_CM - Static variable in class nxopen.cae.XyFunctionUnit: Element Moment unit: cN-cm/cm
ELEMENT_MOMENT_KGF_CM - Static variable in class nxopen.cae.XyFunctionUnit: Element Moment unit: kgf-cm/cm
ELEMENT_MOMENT_KGF_M - Static variable in class nxopen.cae.XyFunctionUnit: Element Moment unit: kgf-m/m
ELEMENT_MOMENT_KGF_MM - Static variable in class nxopen.cae.XyFunctionUnit: Element Moment unit: kgf-mm/mm
ELEMENT_MOMENT_LEVEL_CROSSING_RATE - Static variable in class nxopen.cae.Result.Quantity
ELEMENT_MOMENT_MN_MM - Static variable in class nxopen.cae.XyFunctionUnit: Element Moment unit: mN-mm/mm
ELEMENT_MOMENT_NM - Static variable in class nxopen.cae.XyFunctionUnit: Element Moment unit: N-m/m
ELEMENT_MOMENT_NMM - Static variable in class nxopen.cae.XyFunctionUnit: Element Moment unit: N-mm/mm
ELEMENT_NODAL - Static variable in class nxopen.cae.Result.Location
ELEMENT_POINT - Static variable in class nxopen.uf.UFSf.ElmDimensionType
ELEMENT_RESULTANT_BEAM - Static variable in class nxopen.cae.Result.DataType
ELEMENT_RESULTANT_CREEP_STRAIN - Static variable in class nxopen.cae.Result.Quantity
ELEMENT_RESULTANT_ELASTIC_STRAIN - Static variable in class nxopen.cae.Result.Quantity
ELEMENT_RESULTANT_PLASTIC_STRAIN - Static variable in class nxopen.cae.Result.Quantity
ELEMENT_RESULTANT_SHELL - Static variable in class nxopen.cae.Result.DataType
ELEMENT_RESULTANT_SPRING_DASHPOT - Static variable in class nxopen.cae.Result.DataType
ELEMENT_RESULTANT_THERMAL_STRAIN - Static variable in class nxopen.cae.Result.Quantity
ELEMENT_RESULTANTS - Static variable in class nxopen.cae.Result.Quantity
ELEMENT_RESULTANTS_LEVEL_CROSSING_RATE - Static variable in class nxopen.cae.Result.Quantity
ELEMENT_SHAPE - Static variable in class nxopen.cae.ElementSplitBuilder.SplitMethodType: Based on element shape
ELEMENT_SHELL - Static variable in class nxopen.uf.UFSf.ElmDimensionType
ELEMENT_SIZE - Static variable in class nxopen.cae.Result.Quantity
ELEMENT_SKEW - Static variable in class nxopen.cae.Result.Quantity
ELEMENT_SOLID - Static variable in class nxopen.uf.UFSf.ElmDimensionType
ELEMENT_STRAIN_RESULTANTS - Static variable in class nxopen.cae.Result.Quantity
ELEMENT_STRAIN_RESULTANTS_LEVEL_CROSSING_RATE - Static variable in class nxopen.cae.Result.Quantity
ELEMENT_STRETCH - Static variable in class nxopen.cae.Result.Quantity
ELEMENT_TAPER - Static variable in class nxopen.cae.Result.Quantity
ELEMENT_TWIST - Static variable in class nxopen.cae.Result.Quantity
ELEMENT_WARP - Static variable in class nxopen.cae.Result.Quantity
ELEMENTAL - Static variable in class nxopen.cae.LaminateGraphicalReportBuilder.ElemNodalOptionType: Average element-nodal results per element
ELEMENTAL - Static variable in class nxopen.cae.LaminateQuickReportBuilder.ElemNodalOptionType: Average element-nodal results per element
ELEMENTAL - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.ElemNodalOptionType: Average element-nodal results per element
ELEMENTAL - Static variable in class nxopen.cae.responsesimulation.CoordinateSystem
ELEMENTAL - Static variable in class nxopen.cae.ResultVariable.NodalCombination
elementalElemSelection() - Method in interface nxopen.cae.LaminateImportedLayupBuilder: Returns the element face on which to apply the elemental mapping
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
ElementalFunctionEvalBeamLocation - Class in nxopen.cae.responsesimulation: Specifies beam element evaluation locations
ElementalFunctionEvaluationSetting - Interface in nxopen.cae.responsesimulation: Represents the parameters setting for elemental function evaluation.
ElementalFunctionEvaluationSettingBuilder - Interface in nxopen.cae.responsesimulation: This is a manager to the ElementalFunctionEvaluationSetting class.
elementalMapping() - Method in interface nxopen.cae.LaminateImportedLayupBuilder: Returns the elemental mapping options.
elementalNodalMapping() - Method in interface nxopen.cae.LaminateImportedLayupBuilder: Returns the ply mapping options.
ElementAssociatedDataUtils - Interface in nxopen.cae: Represents a system to access element associated data
To obtain an instance of this class, refer to NodeElementManager

Created in NX12.0.0
ElementAssociatedDataUtils.AskBeamData - Class in nxopen.cae: This class holds the data returned from ElementAssociatedDataUtils.askBeamData(nxopen.cae.FEElement)
ElementAssociatedDataUtils.AskBushingData - Class in nxopen.cae: This class holds the data returned from ElementAssociatedDataUtils.askBushingData(nxopen.cae.FEElement, nxopen.Point3d, nxopen.Point3d, nxopen.Point3d)
ElementAssociatedDataUtils.AskConstraintEquationData - Class in nxopen.cae: This class holds the data returned from ElementAssociatedDataUtils.askConstraintEquationData(nxopen.cae.FEElement)
ElementAssociatedDataUtils.AskDamperData - Class in nxopen.cae: This class holds the data returned from ElementAssociatedDataUtils.askDamperData(nxopen.cae.FEElement)
ElementAssociatedDataUtils.AskGapData - Class in nxopen.cae: This class holds the data returned from ElementAssociatedDataUtils.askGapData(nxopen.cae.FEElement)
ElementAssociatedDataUtils.AskInterpolationData - Class in nxopen.cae: This class holds the data returned from ElementAssociatedDataUtils.askInterpolationData(nxopen.cae.FEElement)
ElementAssociatedDataUtils.AskLumpedMassData - Class in nxopen.cae: This class holds the data returned from ElementAssociatedDataUtils.askLumpedMassData(nxopen.cae.FEElement)
ElementAssociatedDataUtils.AskRigidData - Class in nxopen.cae: This class holds the data returned from ElementAssociatedDataUtils.askRigidData(nxopen.cae.FEElement)
ElementAssociatedDataUtils.AskShellData - Class in nxopen.cae: This class holds the data returned from ElementAssociatedDataUtils.askShellData(nxopen.cae.FEElement, nxopen.Point3d, nxopen.Point3d, nxopen.Point3d)
ElementAssociatedDataUtils.AskSpringData - Class in nxopen.cae: This class holds the data returned from ElementAssociatedDataUtils.askSpringData(nxopen.cae.FEElement)
ElementCollection - Interface in nxopen.cae.connections: Element collection provides methods to manage Element objects
To obtain an instance of this class, refer to BaseFEModel

Created in NX11.0.0
elementColorCycler() - Method in interface nxopen.cae.ModelDisplayBuilder: Returns the element color cycler basis
License requirements: nx_masterfem ("Finite Element Modeling")
.
elementConnectivity() - Method in interface nxopen.cae.NodeElementInfoBuilder: Returns the element connectivity
License requirements: None.
ElementConnectivityBuilder - Interface in nxopen.cae: Represents a ElementConnectivityBuilder
To create a new instance of this class, use NodeElementManager.createElementConnectivityBuilder()

Created in NX5.0.0
ElementConnectivityBuilder.Methods - Class in nxopen.cae: Available modify connectivity methods
ElementConnectivityBuilder.Types - Class in nxopen.cae: Modify connectivity types
elementConnectScope() - Method in interface nxopen.cae.modelcheck.AlignBeamElementDirectionBuilder: Returns the option to indicate how to define connected elements for checking
License requirements: None.
elementConnectScope() - Method in interface nxopen.cae.modelcheck.AlignShellElementNormalBuilder: Returns the option to indicate how to define connected elements for checking
License requirements: None.
elementContainer() - Method in interface nxopen.cae.DestinationCollectorBuilder: Returns the Element Collector object
License requirements: nx_masterfem ("Finite Element Modeling")
.
ElementCreateBuilder - Interface in nxopen.cae: Represents a ElementCreateBuilder which allows you to manually create elements from existing nodes.
ElementCreateBuilder.ElemDimType - Class in nxopen.cae: Dimension of the element to be created
ElementCreateBuilder.NewMeshType - Class in nxopen.cae: Option to create new mesh or add to existing mesh
elementcriteria() - Method in interface nxopen.cae.ResultVariable: Returns the elemental result criteria
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
ElementDeleteBuilder - Interface in nxopen.cae: Represents a ElementDeleteBuilder
To create a new instance of this class, use NodeElementManager.createDeleteElementBuilder()

Created in NX5.0.0
elementDescritorTag - Variable in class nxopen.uf.UFSf.ContactMeshData
elementDesTag - Variable in class nxopen.uf.UFSf.EfConnInfo
ElementDetachBuilder - Interface in nxopen.cae: Represents a ElementDetachBuilder
To create a new instance of this class, use NodeElementManager.createElementDetachBuilder()

Created in NX11.0.0
elementDimension() - Method in interface nxopen.cae.ElementRotateBuilder: Returns the dimension of the elements to be rotated
License requirements: None.
elementDimension() - Method in interface nxopen.cae.ElementTranslateBuilder: Returns the dimension of the elements to be translated
License requirements: None.
elementDimension() - Method in interface nxopen.cae.ElementTypeBuilder: Returns the element dimension used to limit the valid ElementTypeBuilder.elementTypeName() and ElementTypeBuilder.setElementTypeName(java.lang.String) values.
elementDimensionOption() - Method in interface nxopen.cae.ElementCreateBuilder: Returns the element dimension option
License requirements: None.
elementDimensionOption() - Method in interface nxopen.cae.ElementExtrudeBuilder: Returns the element dimension option
License requirements: None.
elementDimensionOption() - Method in interface nxopen.cae.ElementProjectBuilder: Returns the element dimension option
License requirements: None.
elementDimensionOption() - Method in interface nxopen.cae.ElementReflectBuilder: Returns the element dimension option
License requirements: None.
elementDimensionOption() - Method in interface nxopen.cae.ElementRevolveBuilder: Returns the elem dimension option
License requirements: None.
elementDimOpt() - Method in interface nxopen.cae.ReassignElementsBuilder: Returns the element dim opt
License requirements: None.
elementDisplayQuality() - Method in interface nxopen.cae.ModelDisplayBuilder: Returns the element display quality setting
License requirements: nx_masterfem ("Finite Element Modeling")
.
ElementDoubleBuilder - Interface in nxopen.cam: Represents a builder for an Element double value in of a CAM.CAMObject
Created in NX9.0.3
elementEdge() - Method in interface nxopen.cae.CAEConnectionBuilder: Returns the selected element edge(s)
License requirements: None.
elementEdge() - Method in interface nxopen.cae.OpenDuctMeshBuilder: Returns the selected element edge(s)
License requirements: None.
ElementEdgeCheckBuilder - Interface in nxopen.cae.modelcheck: Represents a ElementEdgeCheckBuilder which can be used to detect free element edges or non-manifold edges.
ElementEdgeCheckBuilder.DoCheckData - Class in nxopen.cae.modelcheck: This class holds the data returned from ElementEdgeCheckBuilder.doCheck()
ElementEdgeCheckBuilder.EdgeDisplayStyle - Class in nxopen.cae.modelcheck: the display style of the edges detected
ElementEdgeCheckBuilder.ExecuteCheckData - Class in nxopen.cae.modelcheck: This class holds the data returned from ElementEdgeCheckBuilder.executeCheck()
ElementEdgeCheckBuilder.Scope - Class in nxopen.cae.modelcheck: the Scope over which the Computation of free/non-manifold edges with be done
elementEdgeFeatureAngle() - Method in interface nxopen.cae.PolygonFaceOnMeshBuilder: Returns the element edge feature angle
License requirements: nx_masterfem ("Finite Element Modeling")
.
elementEdges() - Method in interface nxopen.cae.AttachElementsBuilder: Returns the element edges
License requirements: None.
ElementExtractBuilder - Interface in nxopen.cae: Builder for creating Element Extract
To create a new instance of this class, use NodeElementManager.createElementExtractBuilder()

Created in NX7.5.0
ElementExtrudeBuilder - Interface in nxopen.cae: Represents a ElementExtrudeBuilder
To create a new instance of this class, use NodeElementManager.createElementExtrudeBuilder()

Created in NX5.0.0
ElementExtrudeBuilder.DistanceType - Class in nxopen.cae: Distance option
ElementExtrudeBuilder.ElemDimType - Class in nxopen.cae: Dimension of element to be created
ElementExtrudeBuilder.MethodType - Class in nxopen.cae: Extrusion method
ElementExtrudeBuilder.NewMeshType - Class in nxopen.cae: Option to create new mesh or add to existing mesh
elementFace() - Method in interface nxopen.cae.CAEConnectionBuilder: Returns the selected element face(s)
License requirements: None.
elementFace() - Method in interface nxopen.cae.SurfaceCoatBuilder: Returns the selected element face(s)
License requirements: None.
elementFaceFeatureAngle() - Method in interface nxopen.cae.PolygonFaceOnMeshBuilder: Returns the element face feature angle
License requirements: nx_masterfem ("Finite Element Modeling")
.
elementFaceStressAxis() - Method in interface nxopen.cae.DurabilityStressAxesBuilder: Returns the element face stress axis.
elementFilter() - Method in interface nxopen.cae.LaminateGraphicalReportBuilder: Returns the element filter
License requirements: None.
elementFilter() - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder: Returns the element filter
License requirements: None.
ElementGroup - Interface in nxopen.pdm: Represents a base class that provides common methods for various model elements in a CollaborativeDesign .
elementId - Variable in class nxopen.cae.Post.StreamlineSeed: -1 if not known
elementId() - Method in interface nxopen.pid.OffSheetConnectorBuilder: Returns the current element ID of this OSC.
elementId() - Method in interface nxopen.pid.PipeBuilder: Returns the current element ID of this pipe.
elementIdOffset - Variable in class nxopen.cae.FEModel.IdSpecificationObject: If true element_start_id will be used as an offset for imported element ids
elementindex - Variable in class nxopen.shipdesign.Generator.AskPlatesSpatialRelationsData
ElementInfoUtils - Interface in nxopen.cae: Represents a system to query information about FE-based elements
To obtain an instance of this class, refer to NodeElementManager

Created in NX11.0.0
ElementIntBuilder - Interface in nxopen.cam: Represents a builder for an Element int value in of a CAM.CAMObject
Created in NX10.0.1
elementList() - Method in interface nxopen.cae.LocalRemeshBuilder: Returns the select elements
License requirements: None.
elementLocation() - Method in interface nxopen.cae.responsesimulation.DataLocation: Returns the element location.
elementLocation() - Method in interface nxopen.cae.responsesimulation.ElementalFunctionEvaluationSettingBuilder: Returns the evaluation location of element.
ElementLocation - Class in nxopen.cae.responsesimulation: Specifies element locations
elementMarker() - Method in interface nxopen.cae.MeshCollectorDisplayDefaults0d: Returns the element marker display setting.
elementMarker() - Method in interface nxopen.cae.MeshDisplaySettings0d: Returns the element marker display setting.
ElementMaterialOrientationCheckBuilder - Interface in nxopen.cae.modelcheck: Represents a ElementMaterialOrientationCheckBuilder used to check the material orientation for shell and solid elements.
ElementMaterialOrientationCheckBuilder.DoCheckData - Class in nxopen.cae.modelcheck: This class holds the data returned from ElementMaterialOrientationCheckBuilder.doCheck()
ElementMaterialOrientationCheckBuilder.MaterialOrientationType - Class in nxopen.cae.modelcheck: the material orientation type
ElementModifyLabelBuilder - Interface in nxopen.cae: Represents a ElementModifyLabelBuilder
To create a new instance of this class, use NodeElementManager.createElementModifyLabelBuilder()

Created in NX5.0.0
ElementModifyLabelBuilder.LabelType - Class in nxopen.cae: the label types
ElementModifyOrderBuilder - Interface in nxopen.cae: Represents a ElementModifyOrderBuilder
To create a new instance of this class, use NodeElementManager.createElementModifyOrderBuilder()

Created in NX6.0.1
ElementModifyOrderBuilder.Midnode - Class in nxopen.cae: Represents the options for midnodes
ElementModifyOrderBuilder.Operation - Class in nxopen.cae: Represents the options for type of operation
ElementModifyTypeBuilder - Interface in nxopen.cae: Represents a ElementModifyTypeBuilder
To create a new instance of this class, use NodeElementManager.createElementModifyTypeBuilder()

Created in NX8.5.0
elementName() - Method in interface nxopen.annotations.ShipDimensionBuilder: Returns the element name
License requirements: drafting ("DRAFTING")
.
elementName - Variable in class nxopen.uf.UFSf.ContactMeshData
elementNormals() - Method in interface nxopen.cae.MeshCollectorDisplayDefaults2d: Returns the element normals display setting.
elementNormals() - Method in interface nxopen.cae.MeshDisplaySettings2d: Returns the element normals display setting.
ElementNormalsType - Class in nxopen.cae: specifies the type of display for 2d element normals
elementOffset() - Method in interface nxopen.cae.SolverAppendOption: Returns the element offset
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
elementOrder() - Method in interface nxopen.cae.ElementTypeBuilder: Returns the element order used to limit the valid ElementTypeBuilder.elementTypeName() and ElementTypeBuilder.setElementTypeName(java.lang.String) values.
ElementProjectBuilder - Interface in nxopen.cae: Represents a ElementProjectBuilder
To create a new instance of this class, use NodeElementManager.createElementProjectBuilder()

Created in NX5.0.0
ElementProjectBuilder.ElementDimensionType - Class in nxopen.cae: Dimension of element to be projected
ElementProjectBuilder.LabelType - Class in nxopen.cae: Option to use label/increment or offset
ElementProjectBuilder.MethodType - Class in nxopen.cae: Projection method
ElementProjectBuilder.NewMeshType - Class in nxopen.cae: Option to create new mesh or add to existing mesh
elementPropertyName - Variable in class nxopen.cae.modelcheck.TestValueTypes.ElementReference: a specified integer element property name
elementPropertyTable() - Method in interface nxopen.cae.IMeshCollector: Returns the element property table associated with the mesh collector
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
elementPropertyTable() - Method in interface nxopen.cae.Mesh: Returns the element property table associated with the mesh object
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
elementPropertyValue - Variable in class nxopen.cae.modelcheck.TestValueTypes.ElementReference: the control value of integer element property, only valid when property name is not NULL
elementQuality() - Method in interface nxopen.cae.NodeElementInfoBuilder: Returns the element quality
License requirements: None.
ElementQualityCheckBuilder - Interface in nxopen.cae.modelcheck: Represents a ElementQualityCheckBuilder to perform quality checking on the candidate elements.
ElementQualityCheckBuilder.OutputElements - Class in nxopen.cae.modelcheck: indicates how to create output group
ElementQualityCheckBuilder.ReportFormat - Class in nxopen.cae.modelcheck: indicates how to generate report
ElementQualityCheckResults - Interface in nxopen.cae.modelcheck: Represents the element quality checking result of ElementQualityCheckBuilder
To obtain an instance of this class use CAE.ModelCheck.ElementQualityCheckBuilder

Created in NX8.5.0
ElementQualityCheckResults.TestSummary - Class in nxopen.cae.modelcheck: Reprents the summary data of a specified quality checking test type
ElementQualitySetting - Interface in nxopen.cae.modelcheck: Represents element quality check settings of a specified solver language.
ElementQualitySetting.LimitValue - Class in nxopen.cae.modelcheck: indicates how criteria value is defined
ElementQualitySettingCollection - Interface in nxopen.cae.modelcheck: Represents a collection of ElementQualitySetting in a cae part.
elementQualitySettings() - Method in interface nxopen.cae.CaePart: Returns the element quality settings collection belonging to this CAE Part .
ElementReference() - Constructor for class nxopen.cae.modelcheck.TestValueTypes.ElementReference
ElementReference(String, String, int) - Constructor for class nxopen.cae.modelcheck.TestValueTypes.ElementReference: Constructor for the ElementReference object.
ElementReflectBuilder - Interface in nxopen.cae: Represents a ElementReflectBuilder
To create a new instance of this class, use NodeElementManager.createElementReflectBuilder()

Created in NX5.0.0
ElementReflectBuilder.ElemDimType - Class in nxopen.cae: Dimension of element to be reflected
ElementReflectBuilder.LabelType - Class in nxopen.cae: Option to use label/increment or offset
ElementReflectBuilder.NewMeshType - Class in nxopen.cae: Option to create new mesh or add to existing mesh
elementReportFormat() - Method in interface nxopen.cae.modelcheck.ElementQualityCheckBuilder: Returns the report style
License requirements: None.
ElementRevolveBuilder - Interface in nxopen.cae: Represents a ElementRevolveBuilder
To create a new instance of this class, use NodeElementManager.createElementRevolveBuilder()

Created in NX5.0.0
ElementRevolveBuilder.AngleType - Class in nxopen.cae: the angle type - total or per copy
ElementRevolveBuilder.ElemDimType - Class in nxopen.cae: Dimension of element to be created
ElementRevolveBuilder.NewMeshType - Class in nxopen.cae: Option to create new mesh or add to existing mesh
ElementRotateBuilder - Interface in nxopen.cae: Represents a ElementRotateBuilder
To create a new instance of this class, use NodeElementManager.createElementRotateBuilder()

Created in NX12.0.0
ElementRotateBuilder.CopyType - Class in nxopen.cae: the copy types
ElementRotateBuilder.DistanceType - Class in nxopen.cae: Distance - specify whether the translation distance is per copy or total
ElementRotateBuilder.ElemDimensionType - Class in nxopen.cae: Dimension of the elements to be created
ElementRotateBuilder.LabelType - Class in nxopen.cae: Option to use label/increment or offset
ElementRotateBuilder.MethodType - Class in nxopen.cae: Translation method
ElementRotateBuilder.NewMeshType - Class in nxopen.cae: Option to create a new mesh or add the new elements to an existing mesh
elements() - Method in interface nxopen.cae.BeamEADBuilder: Returns the select element operator selects elements
License requirements: nx_masterfem ("Finite Element Modeling")
.
elements() - Method in interface nxopen.cae.BushingEADBuilder: Returns the select element operator selects elements
License requirements: nx_masterfem ("Finite Element Modeling")
.
elements() - Method in interface nxopen.cae.DamperEADBuilder: Returns the select element operator selects elements
License requirements: nx_masterfem ("Finite Element Modeling")
.
elements() - Method in interface nxopen.cae.DurabilityEventOverridesBuilder: Returns the select elements.
elements() - Method in interface nxopen.cae.ElementExtrudeBuilder: Returns the selected elements
License requirements: None.
elements() - Method in interface nxopen.cae.ElementModifyLabelBuilder: Returns the elements whose labels are to be modified
License requirements: None.
elements() - Method in interface nxopen.cae.ElementProjectBuilder: Returns the selected elements to be extruded
License requirements: None.
elements() - Method in interface nxopen.cae.ElementReflectBuilder: Returns the selected elements to be reflected
License requirements: None.
elements() - Method in interface nxopen.cae.ElementRevolveBuilder: Returns the selected elements to be revolved
License requirements: None.
elements() - Method in interface nxopen.cae.GapEADBuilder: Returns the select element operator selects elements
License requirements: nx_masterfem ("Finite Element Modeling")
.
elements() - Method in interface nxopen.cae.InterpolationEADBuilder: Returns the select element operator selects elements
License requirements: nx_masterfem ("Finite Element Modeling")
.
elements() - Method in interface nxopen.cae.LumpedMassEADBuilder: Returns the select element operator selects elements
License requirements: nx_masterfem ("Finite Element Modeling")
.
elements() - Method in interface nxopen.cae.modelcheck.AlignShellElementFirstEdgeBuilder: Returns the elements
License requirements: None.
elements - Variable in class nxopen.cae.modelcheck.ElementMaterialOrientationCheckBuilder.DoCheckData: the elements associated with the orientation vectors
elements() - Method in interface nxopen.cae.MorphRevolvedMeshBuilder: Returns the elements
License requirements: None.
elements() - Method in interface nxopen.cae.OneDimensionalElementSplitBuilder: Returns the selected elements
License requirements: None.
ELEMENTS - Static variable in class nxopen.cae.Post.MarkLocation: Deprecated.
ELEMENTS - Static variable in class nxopen.cae.Post.Style
ELEMENTS - Static variable in class nxopen.cae.ResultProbeBuilder.SelectionType
elements() - Method in interface nxopen.cae.RigidEADBuilder: Returns the select element operator selects elements
License requirements: nx_masterfem ("Finite Element Modeling")
.
elements() - Method in interface nxopen.cae.ShellEADBuilder: Returns the select element operator selects elements
License requirements: nx_masterfem ("Finite Element Modeling")
.
elements() - Method in interface nxopen.cae.SolidPropertyCheckBuilder: Returns the selected elements
License requirements: None.
elements() - Method in interface nxopen.cae.SpringEADBuilder: Returns the select element operator selects elements
License requirements: nx_masterfem ("Finite Element Modeling")
.
ElementsAndEdgeIdsData() - Constructor for class nxopen.cae.FEElemEdge.ElementsAndEdgeIdsData
ElementsAndFaceIdsData() - Constructor for class nxopen.cae.FEElemFace.ElementsAndFaceIdsData
elementsColor - Variable in class nxopen.cae.modelcheck.DuplicateElementsCheckBuilder.DisplaySettings: The display color of duplicate elements
elementSelectInternal() - Method in interface nxopen.cae.ModelDisplayBuilder: Returns the element select internal switch
License requirements: nx_masterfem ("Finite Element Modeling")
.
elementSelection() - Method in interface nxopen.cae.ElementDetachBuilder: Returns the selected elements which are to be detached
License requirements: None.
elementSelection() - Method in interface nxopen.cae.ElementRotateBuilder: Returns the selected elements
License requirements: None.
elementSelection() - Method in interface nxopen.cae.ElementTranslateBuilder: Returns the selected elements
License requirements: None.
elementSelection() - Method in interface nxopen.cae.ManualMorphBuilder: Returns the selected elements, which will take part in mapping
License requirements: None.
elementSelection() - Method in interface nxopen.cae.PolygonFaceOnMeshBuilder: Returns the selected element(s)
License requirements: None.
elementShrinkPercent() - Method in interface nxopen.cae.MeshCollectorDisplayDefaults1d: Returns the element shrink percentage (0 to 100).
elementShrinkPercent() - Method in interface nxopen.cae.MeshCollectorDisplayDefaults2d: Returns the element shrink percentage (0 to 100).
elementShrinkPercent() - Method in interface nxopen.cae.MeshCollectorDisplayDefaults3d: Returns the element shrink percentage (0 to 100).
elementShrinkPercent() - Method in interface nxopen.cae.MeshDisplaySettings1d: Returns the element shrink percentage (0 to 100).
elementShrinkPercent() - Method in interface nxopen.cae.MeshDisplaySettings2d: Returns the element shrink percentage (0 to 100).
elementShrinkPercent() - Method in interface nxopen.cae.MeshDisplaySettings3d: Returns the element shrink percentage (0 to 100).
elementSize() - Method in interface nxopen.cae.ConvexMeshBuilder: Deprecated.
Deprecated in NX12.0.0. Use PropertyTable instead.
elementSize() - Method in interface nxopen.cae.FluidDomainBuilder: Returns the element size
License requirements: None.
elementSize() - Method in interface nxopen.cae.MappedMeshBuilder: Returns the element size
License requirements: None.
elementSize() - Method in interface nxopen.cae.ShipMeshAutomationBuilder: Returns the value of meshing element size
License requirements: nx_masterfem ("Finite Element Modeling"), nx_ship_basic ("Ship Basic Design")
.
elementSize - Variable in class nxopen.uf.UFSf.Ugs2dMeshParms
elementSize - Variable in class nxopen.uf.UFSf.UgsTetMeshParms
elementSizeExpression() - Method in interface nxopen.cae.MappedMeshBuilder: Returns the element size
License requirements: nx_masterfem ("Finite Element Modeling")
.
elementsOutputOption() - Method in interface nxopen.cae.modelcheck.ElementQualityCheckBuilder: Returns the element output options
License requirements: None.
elementSpecificTestCount() - Method in interface nxopen.cae.modelcheck.QualityTestValue: Returns the count of ElementSpecificTestValue in this test setting
License requirements: None.
ElementSpecificTestValue - Interface in nxopen.cae.modelcheck: Represents the quality setting for a specfied element reference
Not to support KF
.
ElementSplitBuilder - Interface in nxopen.cae: Represents a ElementSplitBuilder
To create a new instance of this class, use NodeElementManager.createElementSplitBuilder()

Created in NX5.0.0
ElementSplitBuilder.SplitMethodType - Class in nxopen.cae: the split method types
ElementSplitBuilder.Types - Class in nxopen.cae: the element split types
elementsss() - Method in interface nxopen.cae.ElementSplitBuilder: Returns the selected elements
License requirements: nx_masterfem ("Finite Element Modeling")
.
elementStartId - Variable in class nxopen.cae.FEModel.IdSpecificationObject: Start id to use for imported elements
ElementStatusType - Class in nxopen.cae.connections: Element status
ElementStringBuilder - Interface in nxopen.cam: Represents a builder for an Element int value in of a CAM.CAMObject
Created in NX10.0.3
elementsWidth - Variable in class nxopen.cae.modelcheck.DuplicateElementsCheckBuilder.DisplaySettings: The display line width of duplicate elements
elementTagsP - Variable in class nxopen.uf.UFSf.LocateElementByIdData
elementTagsP - Variable in class nxopen.uf.UFSf.LocateElementData
elementTestCount() - Method in interface nxopen.cae.modelcheck.ElementQualityCheckResults: Returns the total number of element tested during a test session
License requirements: None.
ElementTestResult - Interface in nxopen.cae.modelcheck: Represents quality checking result for an element.
ElementThicknessData() - Constructor for class nxopen.cae.ThicknessBuilder.ElementThicknessData
ElementTranslateBuilder - Interface in nxopen.cae: Represents a ElementTranslateBuilder
To create a new instance of this class, use NodeElementManager.createElementTranslateBuilder()

Created in NX5.0.0
ElementTranslateBuilder.CopyType - Class in nxopen.cae: the copy types
ElementTranslateBuilder.DistanceType - Class in nxopen.cae: Distance - specify whether the translation distance is per copy or total
ElementTranslateBuilder.ElemDimensionType - Class in nxopen.cae: Dimension of the elements to be created
ElementTranslateBuilder.LabelType - Class in nxopen.cae: Option to use label/increment or offset
ElementTranslateBuilder.MethodType - Class in nxopen.cae: Translation method
ElementTranslateBuilder.NewMeshType - Class in nxopen.cae: Option to create a new mesh or add the new elements to an existing mesh
elementType() - Method in interface nxopen.cae.CAEConnectionBuilder: Returns the element type to be created
License requirements: None.
elementType() - Method in interface nxopen.cae.CAEWeldConnectionBuilder: Returns the element type to be created
License requirements: None.
ElementType - Class in nxopen.cae.connections: Element type
elementType() - Method in interface nxopen.cae.ContactMeshBuilder: Returns the element type to be created
License requirements: None.
elementType() - Method in interface nxopen.cae.ConvexMeshBuilder: Returns the element type
License requirements: None.
elementType() - Method in interface nxopen.cae.ElementCreateBuilder: Returns the element type builder.
elementType() - Method in interface nxopen.cae.ElementExtrudeBuilder: Returns the element type builder.
elementType() - Method in interface nxopen.cae.ElementModifyOrderBuilder: Returns the element type to be created
License requirements: None.
elementType() - Method in interface nxopen.cae.ElementModifyTypeBuilder: Returns the element type to be created
License requirements: None.
elementType() - Method in interface nxopen.cae.ElementProjectBuilder: Returns the element type builder.
elementType() - Method in interface nxopen.cae.ElementReflectBuilder: Returns the element type builder.
elementType() - Method in interface nxopen.cae.ElementRevolveBuilder: Returns the element type builder.
elementType() - Method in interface nxopen.cae.ElementRotateBuilder: Returns the element type builder.
elementType() - Method in interface nxopen.cae.ElementTranslateBuilder: Returns the element type builder.
elementType() - Method in interface nxopen.cae.FluidDomainBuilder: Returns the element type builder
License requirements: None.
elementType() - Method in interface nxopen.cae.MappedMeshBuilder: Returns the elem type name.
elementType() - Method in interface nxopen.cae.Mesh0dBuilder: Returns the element type builder.
elementType() - Method in interface nxopen.cae.Mesh1dBuilder: Returns the element type builder.
elementType() - Method in interface nxopen.cae.Mesh2dBuilder: Returns the element type builder.
elementType() - Method in interface nxopen.cae.Mesh3dHexBuilder: Returns the element type builder.
elementType() - Method in interface nxopen.cae.Mesh3dHybridBuilder: Returns the element type builder.
elementType() - Method in interface nxopen.cae.Mesh3dTetBuilder: Returns the element type builder.
elementType() - Method in interface nxopen.cae.MeshFromBoundaryBuilder: Returns the element type
License requirements: nx_masterfem ("Finite Element Modeling")
.
elementType() - Method in interface nxopen.cae.MultipleElementCreateBuilder: Returns the element type builder.
elementType() - Method in interface nxopen.cae.NodeElementInfoBuilder: Returns the element type
License requirements: None.
elementType() - Method in interface nxopen.cae.OpenDuctMeshBuilder: Returns the element type
License requirements: None.
elementType() - Method in interface nxopen.cae.PrimitiveMeshBuilder: Returns the element type builder.
elementType() - Method in interface nxopen.cae.PrimitiveRecipeMeshBuilder: Returns the element type builder.
elementType() - Method in interface nxopen.cae.Shell2SolidBuilder: Returns the element type builder.
elementType() - Method in interface nxopen.cae.SurfaceCoatBuilder: Returns the element type to be created
License requirements: None.
elementType() - Method in interface nxopen.cae.SweepBetweenMeshBuilder: Deprecated.
Deprecated in NX10.0.0. Use Mesh3dHexBuilder .
elementType() - Method in interface nxopen.cae.ThickenMeshBuilder: Returns the element type
License requirements: None.
elementType() - Method in interface nxopen.cae.WeldBuilder: Returns the element type to be created for the weld
License requirements: None.
elementType() - Method in interface nxopen.tooling.LsdynaKfileGeneratorBuilder: Returns the element type
License requirements: None.
elementType - Variable in class nxopen.uf.UFSf.AskElementData
elementType - Variable in class nxopen.uf.UFSf.Sf1dMeshData
elementType - Variable in class nxopen.uf.UFSf.Ugs2dMeshParms
elementType - Variable in class nxopen.uf.UFSf.UgsTetMeshParms
ElementTypeBuilder - Interface in nxopen.cae: Represents the specification of the FEA Element Type for a meshing dialog.
ElementTypeBuilder.ElementOrderType - Class in nxopen.cae: Order of the element types to be specified.
ElementTypeBuilder.ElementType - Class in nxopen.cae: Dimension of the element types to be specified.
elementTypeName() - Method in interface nxopen.cae.ElementTypeBuilder: Returns the element type name which defines the type to be used.
elementTypeName - Variable in class nxopen.cae.modelcheck.TestValueTypes.ElementReference: the element type name, which is defined in solver specific item
elementTypeOpt() - Method in interface nxopen.cae.ReassignElementsBuilder: Returns the element type opt
License requirements: None.
elementTypeRbe3() - Method in interface nxopen.cae.CAEConnectionBuilder: Returns the element type to be created
License requirements: None.
ElementTypes - Interface in nxopen.cae: Represents an ElementTypes class.
ElementTypes.Order - Class in nxopen.cae: Specifies different CAE Element Order types
ElementTypes.Shape - Class in nxopen.cae: Specifies different CAE Element Shape types
ElementValue() - Constructor for class nxopen.cae.Result.ElementValue
ElementValue(boolean, Result.ElementValueCriterion) - Constructor for class nxopen.cae.Result.ElementValue: Constructor for the ElementValue object.
elementValue - Variable in class nxopen.cae.Result.ResultParameters: Deprecated.
ELEMFACE2D - Static variable in class nxopen.cae.GroupElemMethodElemOption.ElemOption: return 2D elements in the group as element faces
elemId() - Method in interface nxopen.cae.PostSelectionEntity: Returns the elem label selected
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
elemids - Variable in class nxopen.cae.Post.ElemsVisibilityData: the list of element ids
elemInfoUtils() - Method in interface nxopen.cae.NodeElementManager: Returns the element information utility .
ElemLabelMethod - Interface in nxopen.cae: Represents the output from the elem label smart selector method
To obtain an instance of this class use CAE::SmartSelectionManager
.
elemMaterialDisplayLaminateColor() - Method in interface nxopen.cae.ModelDisplayBuilder: Returns the element material laminate element color
License requirements: nx_masterfem ("Finite Element Modeling")
.
elemMaterialDisplayNoMaterialColor() - Method in interface nxopen.cae.ModelDisplayBuilder: Returns the element material no material element color
License requirements: nx_masterfem ("Finite Element Modeling")
.
elemNodalOption() - Method in interface nxopen.cae.LaminateGraphicalReportBuilder: Returns the solver input
License requirements: None.
elemNodalOption() - Method in interface nxopen.cae.LaminateQuickReportBuilder: Returns the solver input
License requirements: None.
elemNodalOption() - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder: Returns the solver input
License requirements: None.
elemOffset - Variable in class nxopen.cae.FEModelOccurrence.LabelOffsetsData: element offset
elemOffset - Variable in class nxopen.cae.FEModelOccurrence.OccEntityLabelOffsetsData: element offset
elemQualFailColor() - Method in interface nxopen.cae.ModelDisplayBuilder: Returns the element quality check failing element color
License requirements: nx_masterfem ("Finite Element Modeling")
.
elemQualFailShadedBorderColor() - Method in interface nxopen.cae.ModelDisplayBuilder: Returns the element quality check failing shaded element border color
License requirements: nx_masterfem ("Finite Element Modeling")
.
elemQualPassColor() - Method in interface nxopen.cae.ModelDisplayBuilder: Returns the element quality check passing element color
License requirements: nx_masterfem ("Finite Element Modeling")
.
elemQualPassTranslucency() - Method in interface nxopen.cae.ModelDisplayBuilder: Returns the element quality check passing element translucency.
elemQualPassType() - Method in interface nxopen.cae.ModelDisplayBuilder: Returns the element quality check passing element display type
License requirements: nx_masterfem ("Finite Element Modeling")
.
elemRefs() - Method in interface nxopen.cae.NodalForceReportBuilder: Returns the select elements
License requirements: None.
elemSel() - Method in interface nxopen.cae.ElementExtractBuilder: Returns the elem sel
License requirements: None.
elemSel() - Method in interface nxopen.cae.ReassignElementsBuilder: Returns the elem sel
License requirements: None.
elemSelectionMethod() - Method in interface nxopen.cae.modelcheck.AlignShellElementFirstEdgeBuilder: Returns the element selection method
License requirements: None.
ElemsVisibilityData() - Constructor for class nxopen.cae.Post.ElemsVisibilityData
elemtypes() - Method in interface nxopen.cae.ResultVariable: Returns the Element types
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
elevationAngle() - Method in interface nxopen.tooling.DieEngTrimAngleCheckBuilder: Returns the elevation angle
License requirements: None.
ELEVEN - Static variable in class nxopen.geometricanalysis.FaceAnalysisDisplayBuilder.ColorsOptions: Display in 11 colors.
ELEVENTH - Static variable in class nxopen.weld.WeldGroupIdColor: Eleventh Group Id Color Index
ELLIPSE - Static variable in class nxopen.diagramming.DiagrammingAnnotationboundarytype: Ellipse Type
Ellipse - Interface in nxopen: Represents an ellipse curve.
Ellipse - Interface in nxopen.markup: Represents a Ellipse
To create a new instance of this class, use MarkupFileObjectCollection.createEllipse(nxopen.Point2d, double, double)

Created in NX10.0.0
NX_REMOVE_FROM_JAVA_API
ELLIPSE - Static variable in class nxopen.positioning.ConstraintReference.GeometryType: Ellipse
Ellipse() - Constructor for class nxopen.uf.UFEval.Ellipse
Ellipse(boolean, double[], double, double, double[], double[], double[]) - Constructor for class nxopen.uf.UFEval.Ellipse
ELLIPSE - Static variable in class nxopen.weld.WeldBeadBuilder.Types: ellipse shape
Ellipse.CenterAndRadiusData - Class in nxopen.markup: This class holds the data returned from Ellipse.getCenterAndRadius()
Ellipse.ParametersData - Class in nxopen: This class holds the data returned from Ellipse.getParameters()
ELLIPSE_GEOM - Static variable in class nxopen.uf.UFBrep.GeomType
EllipseCollection - Interface in nxopen: Represents a collection of ellipses.
ellipses() - Method in interface nxopen.BasePart: Returns the EllipseCollection instance belonging to this part .
ELLIPTICAL - Static variable in class nxopen.Edge.EdgeType: Elliptical edge
ELLIPTICAL - Static variable in class nxopen.facet.FacetedEdge.FacetededgeType: Elliptical edge
elmId - Variable in class nxopen.uf.UFSf.AskElementData
ELONGATED_HOLE_FEATURE - Static variable in class nxopen.uf.UFGdt.FeatureType
EMARKING - Static variable in class nxopen.annotations.PmiFilterByType.Type: Indicates a PMI e-Marking type
EMBED - Static variable in class nxopen.features.EmbedManagerBuilder.TaskTypes: Embed operating system file in part.
EMBED_DESIGN_GROUPINSIDE_FEATURE_GROUP - Static variable in class nxopen.geometricutilities.ConvertFeatureGroupsToDesignGroupsBuilder.ConversionScheme
EMBED_FEATURE_GROUPINSIDE_DESIGN_GROUP - Static variable in class nxopen.geometricutilities.ConvertFeatureGroupsToDesignGroupsBuilder.ConversionScheme
EMBEDD_FEATURE_GROUP - Static variable in class nxopen.features.FeatureGroup.Type: Embed feature group
EMBEDDED - Static variable in class nxopen.drawings.DetailViewBuilder.LabelOnParentType: Circular with a note embedded
EMBEDDED - Static variable in class nxopen.drawings.ViewDetailLabelBuilder.LabelParentDisplayTypes
EMBEDDED - Static variable in class nxopen.features.BodyByEquationBuilder.LocationTypes: Worksheet is embedded in part.
EMBEDDED - Static variable in class nxopen.features.MathIntegrationBuilder.LocationTypes: Worksheet is embedded in part.
EmbeddedOperationBuilder - Interface in nxopen.features: Represents an EmbeddedOperationBuilder
This is an abstract class, and cannot be instantiated.
embeddedWorksheet() - Method in interface nxopen.features.BodyByEquationBuilder: Returns the currently selected embedded worksheet index.
embeddedWorksheet() - Method in interface nxopen.features.MathIntegrationBuilder: Returns the currently selected embedded worksheet index.
embedFileBrowser() - Method in interface nxopen.features.EmbedManagerBuilder: Returns the file browser to embed a new file into the part.
EmbedManagerBuilder - Interface in nxopen.features: Used to manage the interaction to Embed, Replace, Rename and Delete embedded file information in the part file.
EmbedManagerBuilder.LocationTypes - Class in nxopen.features: The option to specify where the file exists.
EmbedManagerBuilder.TaskTypes - Class in nxopen.features: The task to perform on the file.
EmbedManagerBuilder.UsageAreaTypes - Class in nxopen.features: The area in the part file where the file is to be stored.
embedNativeFileBrowser() - Method in interface nxopen.features.EmbedManagerBuilder: Returns the native OS file browser to embed a new file into the part.
embedWorksheet() - Method in interface nxopen.features.BodyByEquationBuilder: Returns the option to embed worksheet in part
License requirements: None.
embedWorksheet() - Method in interface nxopen.features.MathIntegrationBuilder: Returns the option to embed worksheet in the feature
License requirements: None.
Emboss - Interface in nxopen.features: Represents an emboss feature
To create or edit an instance of this class, use EmbossBuilder

Created in NX4.0.0
EMBOSS_NORMAL_SIDE - Static variable in class nxopen.features.Feature.BooleanType: Emboss, keep tool on normal side of sheet
EMBOSS_OPPOSITE_NORMAL_SIDE - Static variable in class nxopen.features.Feature.BooleanType: Emboss, keep tool opposite of normal side of sheet
EMBOSS_PUNCH - Static variable in class nxopen.uf.UFModl.PunchType
EmbossBody - Interface in nxopen.features: Represents an emboss body feature
To create or edit an instance of this class, use EmbossBodyBuilder

Created in NX8.5.0
EmbossBodyBuilder - Interface in nxopen.features: Represents a EmbossBody builder
To create a new instance of this class, use FeatureCollection.createEmbossBodyBuilder(nxopen.features.EmbossBody)
Default values.
EmbossBuilder - Interface in nxopen.features: Represents an emboss feature builder that creates or edits an emboss feature.
EmbossJoggle - Interface in nxopen.features: Represents a joggle object.
EmbossJoggle.JoggleDirectionMethod - Class in nxopen.features: Describes the option that joggle direction along.
EmbossLimit - Interface in nxopen.features: Represents emboss start and end objects, meaning, targets and end-cap definitions.
EmbossLimit.EndcapMethod - Class in nxopen.features: Describes the method that can be applied to the selected geometry to define the End-Cap.
EmbossLimit.EndcapSourceOption - Class in nxopen.features: Describes the geometry that is used to create the End-Cap face/body.
EmbossProjection - Interface in nxopen.features: Represents a projection object.
EmbossProjection.ProjectionOption - Class in nxopen.features: Describes the geometry for projection
EmbossRegion - Interface in nxopen.features: Represents an emboss region object.
EmbossRegion.ConvexityOption - Class in nxopen.features: Describes whether the emboss geometry is above the target("Pad") or below the target("Pocket"), or both("Mixed").
EmbossSidewall - Interface in nxopen.features: Represents an emboss sidewall object.
EmbossSidewall.SidewallMethod - Class in nxopen.features: Describes the method that can be applied to define the sidewall.
EmbossTaper - Interface in nxopen.features: Represents a taper object.
EmbossTarget - Interface in nxopen.features: Represents a target object.
EMERALD_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
EMF_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
EMF_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
EMF_FORMAT - Static variable in class nxopen.uf.UFPlot.Format
EMISSIVITY_VALUE - Static variable in class nxopen.cae.Result.Quantity
emphasis() - Method in interface nxopen.features.ThroughCurveMeshBuilder: Returns the emphasis options.
emphasis - Variable in class nxopen.uf.UFModlFeatures.AskCurveMesh1Data
emphasis - Variable in class nxopen.uf.UFModlFeatures.AskCurveMeshData
emphasisVisualization() - Method in interface nxopen.preferences.PartPreferences: Returns object for doing Visualization preferences settings for emphasis tab applicable to displayed part .
emphasisVisualization() - Method in interface nxopen.preferences.SessionPreferences: Returns object for doing Visualization Emphasis preferences settings applicable to entire session .
emphasize() - Method in interface nxopen.MeshParameterData: Returns
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
emphasize - Variable in class nxopen.uf.UFAssem.Options
EMPHASIZE_BOTH - Static variable in class nxopen.MeshParameterData.Type
EMPHASIZE_CROSS - Static variable in class nxopen.MeshParameterData.Type
EMPHASIZE_PRIMARY - Static variable in class nxopen.MeshParameterData.Type
emphasizeColor - Variable in class nxopen.uf.UFAssem.Options
EMPTY - Static variable in class nxopen.ame.AddressObjectIotype
EMPTY - Static variable in class nxopen.annotations.TableCellStyleBuilder.ZeroDisplayType
EMPTY - Static variable in class nxopen.assemblies.ReplaceComponentBuilder.ComponentReferenceSet: Set the reference to Empty
EMPTY - Static variable in class nxopen.AttributePropertiesBaseBuilder.ObjectOptions: Deprecated.

No objects are contained in the select object list
EMPTY - Static variable in class nxopen.BasePart.BookmarkOption: Write nothing but header information
EMPTY - Static variable in class nxopen.cam.CAMFeature.ProcessStatus: Feature has no operations
EMPTY - Static variable in class nxopen.diagramming.tables.ZeroDisplay: Empty zero display
EMPTY - Static variable in class nxopen.FontCollection.Type: Font doesn't exist
EMPTY - Static variable in class nxopen.report.AutomationLogger.MessageType: None
EMPTY - Static variable in class nxopen.uf.UFUgfont.Type
EMPTY_LIST - Static variable in class nxopen.uf.UFConstants
emptyMapList() - Method in interface nxopen.cae.ManualMorphBuilder: Removes all the elements from manual map tag array and makes it empty
License requirements: nx_masterfem ("Finite Element Modeling")
.
emptyMovingGroup() - Method in interface nxopen.positioning.Network: Remove all elements from the moving_group.
emptyPartRefsetName() - Method in interface nxopen.assemblies.Component: Returns the name of the reference set which represents the empty set.
emptyPath() - Method in interface nxopen.cam.Path: Empty the path by deleteing all events
License requirements: None.
enable() - Method in interface nxopen.blockstyler.UIBlock: Returns the Enable.
enable() - Method in interface nxopen.cae.responsesimulation.FunctionComponentData: Returns the option to enable the function component to be used while evaluating
License requirements: nx_response_anlys ("NX Response Analysis")
.
enable(boolean) - Method in interface nxopen.display.NonProportionalZoom: Enables non-proportional zoom.
enable() - Method in interface nxopen.motion.JointFriction: Returns the option of included
License requirements: mechanisms ("MECHANISMS")
.
enable() - Method in interface nxopen.motion.PackagingBuilder: Returns the enable flag of Packaging object.
ENABLE_ALL - Static variable in class nxopen.Selection.SelectionAction: Include objects in selection
ENABLE_SPECIFIC - Static variable in class nxopen.Selection.SelectionAction: Include selected objects in selection
enableAbort() - Method in interface nxopen.uf.UFAbort: Refer to UF_ABORT_enable_abort for documentation.
enableAngularLowerLimit() - Method in interface nxopen.mechatronics.ChainJointBuilder: Returns the angular lower limit option.
enableAngularLowerLimit() - Method in interface nxopen.mechatronics.CylindricalJointBuilder: Returns the angular lower limit option.
enableAngularUpperLimit() - Method in interface nxopen.mechatronics.ChainJointBuilder: Returns the angular upper limit option.
enableAngularUpperLimit() - Method in interface nxopen.mechatronics.CylindricalJointBuilder: Returns the angular upper limit option.
enableAutomaticUpdate(boolean) - Method in interface nxopen.uf.UFTabnot: Refer to UF_TABNOT_enable_automatic_update for documentation.
enableBoundaryAdjustment() - Method in interface nxopen.features.shipdesign.SteelInsulationBuilder: Returns the indication if the boundary adjustement is enabled.
enableCdtire(boolean) - Method in interface nxopen.motion.MotionEnvironment: Deprecated.
Deprecated in NX12.0.0. Removed without replacement.
enableCollarPlate() - Method in interface nxopen.features.shipdesign.ProfileCutoutBuilder: Returns the flag to enable collar plate creation when creating profile cutout.
enableCollision() - Method in interface nxopen.cam.SimulationOptionsBuilder: Returns the enable collision
License requirements: None.
enableCornerCut() - Method in interface nxopen.features.shipdesign.ProfileCutoutBuilder: Returns the flag to enable corner cut creation when creating profile cutout.
ENABLED - Static variable in class nxopen.PartCollection.MultipleDisplayedPartStatus: It is possible to have more than one part be displayed (i.e. additional different displayed parts).
ENABLED - Static variable in class nxopen.preferences.ObjectPreferences.Translucency
enableDefaultOrientationAlignment(boolean) - Method in interface nxopen.routing.PathStockBuilder: Set the flag if it is to enable non-circular stock default alignment or not
License requirements: routing_base ("Routing Basic")
.
enableDetailedOutput() - Method in interface nxopen.cae.DurabilityDamageEvaluationBuilder: Returns the detailed output.
enabledFacetCollectionRules() - Method in interface nxopen.blockstyler.SelectFacetRegion: Returns the FacetCollectionRules.
enableDirectedDimension() - Method in interface nxopen.annotations.DimensionWorkflowBuilder: Returns the directed dimension.
enableDisplay() - Method in interface nxopen.cam.SimulationOptionsBuilder: Deprecated.
Deprecated in NX10.0.2. Use SimulationOptionsBuilder.simulationDisplay() instead.
enableDoubleClickFlip() - Method in interface nxopen.blockstyler.SpecifyOrientation: Returns the EnableDoubleClickFlip.
enableEngraving() - Method in interface nxopen.display.DecalBuilder: Returns the engraving enable toggle
License requirements: None.
enableFacetSelection() - Method in interface nxopen.blockstyler.SpecifyOrientation: Returns the EnableFacetSelection
License requirements: None.
enableFacetSelection() - Method in interface nxopen.blockstyler.SpecifyPoint: Returns the EnableFacetSelection
License requirements: None.
enableFacetSelection() - Method in interface nxopen.blockstyler.SpecifyVector: Returns the EnableFacetSelection
License requirements: None.
enableFemUpdate() - Method in interface nxopen.cae.BaseFEModel: This method will enable fem update.
enableflags - Variable in class nxopen.validate.CheckerNode.ChildCheckerEnabledFlagsData: The enable flags of child checkers in the profile checker
enableForce() - Method in interface nxopen.motion.JointFrictionRecurDyn: Returns the enable force
License requirements: mechanisms ("MECHANISMS")
.
enableGapTolerance() - Method in interface nxopen.cae.ContactMeshBuilder: Returns a flag to enable gap tolerance
License requirements: None.
enableHybridDesign() - Method in interface nxopen.Catiav5Creator: Returns the enable hybrid design - If set to true then it will enable hybrid design
License requirements: None.
enableInView(View, boolean) - Method in interface nxopen.annotations.PmiFilter: Enables or disables the PMI filter in a given view
License requirements: geometric_tol ("GDT")
.
enableIpw() - Method in interface nxopen.cam.SimulationOptionsBuilder: Returns the enable ipw
License requirements: None.
enableLevelBasedIpw() - Method in interface nxopen.cam.Preferences: Returns the enable level based ipw
License requirements: None.
enableLimitForce() - Method in interface nxopen.mechatronics.PositionControlBuilder: Returns whether or not to enable the limit force.
enableLimitForce() - Method in interface nxopen.mechatronics.SpeedControlBuilder: Returns whether or not to enable the limit force.
enableLinearLowerLimit() - Method in interface nxopen.mechatronics.CylindricalJointBuilder: Returns the linear lower limit option.If the enable is true, then this joint will be applied the lower limit in linear direction.
enableLinearUpperLimit() - Method in interface nxopen.mechatronics.CylindricalJointBuilder: Returns the linear upper limit option.
enableLmsflexbody(boolean) - Method in interface nxopen.motion.MotionEnvironment: Deprecated.
Deprecated in NX12.0.0. Removed without replacement.
enableLoadCondition(String) - Method in interface nxopen.cae.SimLoadRecipe: Enables a load condition in the Load Recipe.
enableLogicalAssociation(boolean) - Method in interface nxopen.routing.RouteLogicalAssociation: Set Logical Association to enabled state or disabled state.
enableLowerLimit() - Method in interface nxopen.mechatronics.HingeJointBuilder: Returns the lower limit option.
enableLowerLimit() - Method in interface nxopen.mechatronics.LimitSwitchBuilder: Returns the lower limit option.
enableLowerLimit() - Method in interface nxopen.mechatronics.SlidingJointBuilder: Returns the lower limit option.
enableMechatronics(boolean) - Method in interface nxopen.motion.MotionEnvironment: Deprecated.
Deprecated in NX12.0.0. Removed without replacement.
enableMiscCbs() - Method in interface nxopen.uf.UFUndo: Refer to UF_UNDO_enable_misc_cbs for documentation.
enableMovePole(boolean) - Method in interface nxopen.features.GlobalShapingBuilder: Enable move pole
License requirements: solid_modeling ("SOLIDS MODELING")
.
enableObjectsConversion(NXObject[], boolean) - Method in interface nxopen.mechatronics.AnimationConversionBuilder: Enables the conversion of objects.
enableOKButton() - Method in interface nxopen.blockstyler.BlockDialog.EnableOKButton: Callback to enable OK and Apply buttons of the dialog.
enablePlcSimAdvTimeSyn() - Method in interface nxopen.mechatronics.PreferencesBuilder: Returns the plcsim adv time synchronization option
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
enablePointWiring() - Method in interface nxopen.ame.GeneralConnectionSettingsBuilder: Returns the point wiring setting
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
enableQuickAccess() - Method in interface nxopen.uf.UFUi: Refer to UF_UI_enable_quick_access for documentation.
enableRedo(boolean) - Method in interface nxopen.Session: Enable redo for NXOpen programs.
enableResize() - Method in interface nxopen.annotations.PmiPreferences: Returns the flag indicating whether to enable resize.
enableReverseDirection() - Method in interface nxopen.blockstyler.SpecifyVector: Returns the EnableReverseDirection
License requirements: None.
enableScale() - Method in interface nxopen.diagramminglibraryauthor.Symbol2DBuilder: Returns the scaling
License requirements: None.
enableSecondAnchor() - Method in interface nxopen.mechatronics.ChainJointBuilder: Returns the second anchor point option.
enableSmoothEdgesForLWView() - Method in interface nxopen.drawings.ViewWorkflowBuilder: Deprecated.
Deprecated in NX11.0.0. Replacement is not needed. We recommend removing this call from existing programs.
enableSmoothEdgesForLWView() - Method in interface nxopen.preferences.PartDrafting: Returns the flat indicating whether the smart lightweight views should show the smooth edges or render them as normal curves
License requirements: None.
enableStdtire(boolean) - Method in interface nxopen.motion.MotionEnvironment: Deprecated.
Deprecated in NX12.0.0. Removed without replacement.
enableStereo() - Method in interface nxopen.preferences.SessionVisualizationSpecialEffects: Returns the enable stereo flag.
enableSwifttire(boolean) - Method in interface nxopen.motion.MotionEnvironment: Deprecated.
Deprecated in NX12.0.0. Removed without replacement.
enableTimeSync() - Method in interface nxopen.mechatronics.PreferencesBuilder: Returns the time synchronization option
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
enableTnotire(boolean) - Method in interface nxopen.motion.MotionEnvironment: Deprecated.
Deprecated in NX12.0.0. Removed without replacement.
enableTorque() - Method in interface nxopen.motion.JointFrictionRecurDyn: Returns the enable torque
License requirements: mechanisms ("MECHANISMS")
.
enableTrackingValue(String) - Method in interface nxopen.cae.SimLoadRecipe: Enables a tracking value in the Load Recipe.
enableTrimmedAnimation() - Method in interface nxopen.preferences.SessionModeling: Returns the enable trimmed animation setting.
enableUnmatchedGroupOfVisualReport(boolean) - Method in interface nxopen.visualreporting.VisualReportBuilder: Sets whether use of VisualReport.unmatchedGroupLabel() is enabled for the VisualReport being built by this builder.
enableUpperLimit() - Method in interface nxopen.mechatronics.HingeJointBuilder: Returns the upper limit option.
enableUpperLimit() - Method in interface nxopen.mechatronics.LimitSwitchBuilder: Returns the upper limit option.
enableUpperLimit() - Method in interface nxopen.mechatronics.SlidingJointBuilder: Returns the upper limit option.
enableUserDefinedDirection() - Method in interface nxopen.cae.responsesimulation.TranslationalNodalFunctionExcitationBuilder: Returns the excitation function definition method
License requirements: nx_response_anlys ("NX Response Analysis")
.
enableUserDefinedRotation() - Method in interface nxopen.cae.responsesimulation.TranslationalNodalFunctionExcitationBuilder: Returns the excitation function definition method
License requirements: nx_response_anlys ("NX Response Analysis")
.
encodeAuthFile(int, String, String) - Method in interface nxopen.uf.UF: Refer to UF_encode_auth_file for documentation.
encodePartFilename(String, String, String, String) - Method in interface nxopen.uf.UFUgmgr: Refer to UF_UGMGR_encode_part_filename for documentation.
encryptPostConfiguratorFiles(String, String) - Method in interface nxopen.sim.postconfigurator.PostConfiguratorBuilder: Encrypts a post processor with Sold-To ID and expiration date.
ENCUMBRANCE - Static variable in class nxopen.HumanPosturePredictionBuilder.GarbType: Encumbrance
END - Static variable in class nxopen.ame.AccessorEvaluatorBuilder.PositionTypeValue
end() - Method in interface nxopen.annotations.SymmetricalCenterlineBuilder: Returns the end object of Symmetrical Centerline
License requirements: None.
END - Static variable in class nxopen.cae.MeshControlBuilder.ProgressionTypes
END - Static variable in class nxopen.cae.MeshControlBuilder.SizeTypes
END - Static variable in class nxopen.cae.xyplot.AnchorType: the position of end point in a record display
END - Static variable in class nxopen.cam.CamPathToolpathEventLocation
END - Static variable in class nxopen.cam.CAMSetup.Ude: end UDE
end() - Method in interface nxopen.cam.PitchSetting: Returns the end
License requirements: None.
END - Static variable in class nxopen.cam.WedmOperationBuilder.InPathUdeSetTypes: in path ude set at end
end - Variable in class nxopen.DatumAxis.EndPointsData: End point of datum axis
end() - Method in interface nxopen.diagramming.ConnectionBuilder: Returns the end port of this connection.
END - Static variable in class nxopen.diagramming.DiagrammingConnectionlabelposition: End
END - Static variable in class nxopen.diagramming.DiagrammingRepeatstartposition: End
END - Static variable in class nxopen.diagramming.tables.HeaderLocation: End header location
end() - Method in interface nxopen.die.MachineReliefBuilder: Returns the location for the end of the segment definition.
end() - Method in interface nxopen.die.QuickBinderBuilder: Returns the end length extension.
END - Static variable in class nxopen.features.DivideCurveBuilder.InputArcLengthDirectionFlag: Input Arc length from end
end() - Method in interface nxopen.features.SectionEdit: Ends section edit after exiting sketcher
License requirements: solid_modeling ("SOLIDS MODELING")
.
END - Static variable in class nxopen.features.SectionSurfaceBuilder.ControlRegionEnum: Deprecated.

depth and skew applied to the end section of the section surface
END - Static variable in class nxopen.features.SectionSurfaceBuilderEx.ControlRegionType: depth and skew applied to the end section of the section surface
END - Static variable in class nxopen.features.sheetmetal.MiterOptions.PositionOptions: miter is done at the ending
END - Static variable in class nxopen.features.ShelfBuilder.Types
END - Static variable in class nxopen.features.shipdesign.OrientationAngleMethodsBuilder.AlignAtTypes
END - Static variable in class nxopen.features.shipdesign.ShellTemplateBuilder.CornerCutTypes: Add corner cuts on the end side of each template.
END - Static variable in class nxopen.features.StepBuilder.StepLocations: Step is located on one side of a face.
END - Static variable in class nxopen.features.StepBuilder.StepTypes: Adds a step from a boundary to the edge of a face.
END - Static variable in class nxopen.features.TrimCurveBuilder.CurveEndOptions: Trim curve from end
END - Static variable in class nxopen.features.TrimCurveBuilder.FirstBoundingObjectEndOptions: Trim first bounding object from end
END - Static variable in class nxopen.features.TrimCurveBuilder.SecondBoundingObjectEndOptions: Trim second bounding object from end
end() - Method in interface nxopen.geometricanalysis.CurveAnalysisRecord: Deprecated.
Deprecated in NX8.5.0. Use CurveAnalysisDisplay .
END - Static variable in class nxopen.geometricutilities.CurveRangeBuilder.AnchorPositionType: Anchor at the end of the curve
end() - Method in interface nxopen.geometricutilities.CurveRangeBuilder: Returns the end
License requirements: None.
END - Static variable in class nxopen.geometricutilities.ExtensionSide: Extension Side End
END - Static variable in class nxopen.geometricutilities.RegionTracker.ExtremityType: end
END - Static variable in class nxopen.InferSnapType.SnapType: Snap point end
END - Static variable in class nxopen.mechanicalrouting.PathTransitionBuilder.HealOrientation
end() - Method in interface nxopen.MovieManager: Stops movie recording
License requirements: None.
END - Static variable in class nxopen.pid.ConnectionEndType: The end of connection.
END - Static variable in class nxopen.routing.HandrailBuilder.PostTypes
END - Static variable in class nxopen.routing.OverstockBuilder.PointType: End
END - Static variable in class nxopen.routing.PointDefinition: The point defines the end of the overstock application.
END - Static variable in class nxopen.routing.ProfileFrom: Profile is at the end of the last segment.
END - Static variable in class nxopen.tooling.DieEngTrimTaskBuilder.TrimTaskMatchCutType
END - Static variable in class nxopen.uf.UFCurve.EndType
end - Variable in class nxopen.uf.UFDraw.TabnotLine
end - Variable in class nxopen.uf.UFEval.Line
end - Variable in class nxopen.uf.UFPath.CircularMotion
end - Variable in class nxopen.uf.UFPath.HelicalMotion
end - Variable in class nxopen.uf.UFRoute.AskSegmentEndPntsData
end - Variable in class nxopen.uf.UFStudio.StybldCurveTrans
end - Variable in class nxopen.uf.UFStudio.StybldShapeTrans
END - Static variable in class nxopen.visualreporting.VisualReportExplorer.ReportDownStatus: Report Down has reached the lowest level on all branches of the assembly
END1 - Static variable in class nxopen.features.sheetmetal.AeroFlangeBuilder.EndType: Start of section
END2 - Static variable in class nxopen.features.sheetmetal.AeroFlangeBuilder.EndType: End of section
END_ANGLE - Static variable in class nxopen.annotations.OrdinateDoglegDefinition: Specifies end offset and dogleg angle defined
END_APPLY_DEFS_CB - Static variable in class nxopen.uf.UFClone.NotifyCb
END_ASSY_LOAD_CB - Static variable in class nxopen.uf.UFClone.NotifyCb
END_ASSY_NC_LOAD_CB - Static variable in class nxopen.uf.UFClone.NotifyCb
END_CAPS_BOTH - Static variable in class nxopen.uf.UFModl.BeadEnds
END_CAPS_END - Static variable in class nxopen.uf.UFModl.BeadEnds
END_CAPS_NONE - Static variable in class nxopen.uf.UFModl.BeadEnds
END_CAPS_START - Static variable in class nxopen.uf.UFModl.BeadEnds
END_CUSTOM_CASCADE_MENU - Static variable in class nxopen.uf.UFUi.MenuType
END_CUSTOM_MENU - Static variable in class nxopen.uf.UFUi.MenuType
END_CUT1 - Static variable in class nxopen.SketchExpressionModifierBuilder.EndCuts
END_CUT2 - Static variable in class nxopen.SketchExpressionModifierBuilder.EndCuts
END_MILL - Static variable in class nxopen.features.AnalyzePocketBuilder.ToolTypes: End Mill.
END_MILL - Static variable in class nxopen.features.BlendPocketBuilder.ToolTypes: End Mill.
END_OF_CONIC_MOTION - Static variable in class nxopen.cam.ToolpathEventType
END_OF_PASS - Static variable in class nxopen.cam.ToolpathEventType
END_OF_PATH - Static variable in class nxopen.cam.ToolpathEventType
END_ONLY - Static variable in class nxopen.features.MeshTransformerBuilder.MeshTopologyType: End only
END_ONLY - Static variable in class nxopen.tooling.RunnerBuilder.GuideEndType: Use the end point only.
END_PART_CI - Static variable in class nxopen.uf.UFClone.NotifyCb
END_PART_CLONE_CB - Static variable in class nxopen.uf.UFClone.NotifyCb
END_PART_CO - Static variable in class nxopen.uf.UFClone.NotifyCb
END_PART_LOAD_CB - Static variable in class nxopen.uf.UFClone.NotifyCb
END_PART_LOAD_NC_CB - Static variable in class nxopen.uf.UFClone.NotifyCb
END_PERFORM_CB - Static variable in class nxopen.uf.UFClone.NotifyCb
END_POINT - Static variable in class nxopen.cam.CenterlineDrillTurningBuilder.DepthTypes: Depth options: End Point
END_POINT - Static variable in class nxopen.features.AssociativityType: End-point (determined from 3d help point)
END_POINT - Static variable in class nxopen.features.BridgeCurveBuilder.ShapeControlTypes: Deprecated.

end point conditions
END_POINT - Static variable in class nxopen.features.RPOBuilder.AssociativityType: End-point (determined from 3d help point)
END_POINT - Static variable in class nxopen.MeasureManager.EndpointType
END_POINT - Static variable in class nxopen.Sketch.AssocType: End point.
END_POINT - Static variable in class nxopen.uf.UFDrf.AssocType
END_POINT - Static variable in class nxopen.uf.UFGexp.Qualifier
END_POINT - Static variable in class nxopen.uf.UFSket.AssocType
END_POINT1 - Static variable in class nxopen.features.AssociativityType: 1st end point (at minimum parameter value)
END_POINT1 - Static variable in class nxopen.features.RPOBuilder.AssociativityType: 1st end point (at minimum parameter value)
END_POINT2 - Static variable in class nxopen.features.AssociativityType: 2nd end point
END_POINT2 - Static variable in class nxopen.features.RPOBuilder.AssociativityType: 2nd end point
END_REPORT_CB - Static variable in class nxopen.uf.UFClone.NotifyCb
END_SET - Static variable in class nxopen.uf.UFUde.SetType
END_SET_ACTION_CB - Static variable in class nxopen.uf.UFClone.NotifyCb
END_SET_CI_CB - Static variable in class nxopen.uf.UFClone.NotifyCb
END_SET_CO_CB - Static variable in class nxopen.uf.UFClone.NotifyCb
END_SET_DEF_ACTION_CB - Static variable in class nxopen.uf.UFClone.NotifyCb
END_SET_DEF_CI_CB - Static variable in class nxopen.uf.UFClone.NotifyCb
END_SET_DEF_CO_CB - Static variable in class nxopen.uf.UFClone.NotifyCb
END_SET_DEF_ITEM_TYPE_CB - Static variable in class nxopen.uf.UFClone.NotifyCb
END_SET_DEF_NAMING_CB - Static variable in class nxopen.uf.UFClone.NotifyCb
END_SET_DEF_PDM_DESC_CB - Static variable in class nxopen.uf.UFClone.NotifyCb
END_SET_DEF_PDM_NAME_CB - Static variable in class nxopen.uf.UFClone.NotifyCb
END_SET_ITEM_TYPE_CB - Static variable in class nxopen.uf.UFClone.NotifyCb
END_SET_NAME_CB - Static variable in class nxopen.uf.UFClone.NotifyCb
END_SET_NAME_RULE_CB - Static variable in class nxopen.uf.UFClone.NotifyCb
END_SET_NAMING_CB - Static variable in class nxopen.uf.UFClone.NotifyCb
END_SET_PDM_DESC_CB - Static variable in class nxopen.uf.UFClone.NotifyCb
END_SET_PDM_NAME_CB - Static variable in class nxopen.uf.UFClone.NotifyCb
END_SLOPE_ARC - Static variable in class nxopen.features.SectionSurfaceBuilder.Types: Deprecated.

point radius angle arc
END_TO_START - Static variable in class nxopen.weld.WeldPointDirection: Direction is from end to start
END_VERTEX - Static variable in class nxopen.Sketch.ConstraintPointType: End vertex (e.g. the end point of a line)
END_VERTEX - Static variable in class nxopen.uf.UFSket.GeomVertex
endAdjustment() - Method in interface nxopen.features.sheetmetal.AdvancedFlangeBuilder: Returns the flat pattern compensation adjustment at end of the flange
License requirements: None.
endAlignFillerSurfaceOption() - Method in interface nxopen.geometricutilities.AlignmentMethodBuilder: Returns the end align filler surface option
License requirements: None.
endAngle() - Method in interface nxopen.annotations.ArcComponent: Returns the arc end angle in radians.
endAngle() - Method in interface nxopen.Arc: Returns the angle of the arc.
endAngle() - Method in interface nxopen.cam.InspectionArcFeatureBuilder: Returns the Arc end angle
License requirements: None.
endAngle() - Method in interface nxopen.cam.RoughFinishTurningBuilder: Returns the end angle
License requirements: None.
endAngle() - Method in interface nxopen.die.QuickBinderBuilder: Returns the end angle of a planar face.
endAngle() - Method in interface nxopen.Ellipse: Returns the end angle.
endangle - Variable in class nxopen.Ellipse.ParametersData: In radians
endAngle() - Method in interface nxopen.features.AssociativeLineBuilder: Returns the end angle
License requirements: None.
endAngle() - Method in interface nxopen.features.IsoclineCurveBuilder: Returns the end angle
License requirements: None.
endAngle() - Method in interface nxopen.features.SectionCurveBuilder: Returns the end angle
License requirements: None.
endAngle() - Method in interface nxopen.features.subdivision.SubdivisionRevolveBuilder: Returns the end of angular dimension.
endAngle() - Method in interface nxopen.SketchEllipseBuilder: Returns the end angle
License requirements: None.
endAngle - Variable in class nxopen.uf.UFCurve.Arc
endAngle - Variable in class nxopen.uf.UFCurve.AskIsoclineData
endAngle - Variable in class nxopen.uf.UFCurve.SectionRadialData
endAngle - Variable in class nxopen.uf.UFDrf.ArcInfo
endAngle - Variable in class nxopen.uf.UFModl.DimensionData
endAngle() - Method in interface nxopen.weld.WeldGrooveBuilder: Returns the taper angle at the end of the weld
License requirements: ugweld ("UG WELD")
.
endAngleExpression() - Method in interface nxopen.routing.WindCatcherBuilder: Returns the angle in degrees between the wind direction vector and the open face of the Wind Catcher.
endAngleMethods() - Method in interface nxopen.features.shipdesign.OrientationRegionItemBuilder: Returns the angle definition for the end of this region's orientation.
endANsm - Variable in class nxopen.uf.UFSf.AskBeamEndMassData
endAssemblyConstraints() - Method in interface nxopen.positioning.ComponentPositioner: Ends the mode of operation started by ComponentPositioner.beginAssemblyConstraints() All non-persistent constraints in this ComponentPositioner will be deleted.
endastate - Variable in class nxopen.cae.ElementAssociatedDataUtils.AskBeamData: Pin flags End A state
endAtAngle() - Method in interface nxopen.features.AssociativeLineBuilder: Returns the end at angle
License requirements: None.
endAttachment() - Method in interface nxopen.features.shipdesign.BracketBuilder: Returns the end attachment.
endBlendScaleFactor() - Method in interface nxopen.geometricutilities.ScalingMethodBuilder: Returns the end blend scale factor.
endBNsm - Variable in class nxopen.uf.UFSf.AskBeamEndMassData
endBoundary() - Method in interface nxopen.features.shipdesign.StiffenerBySupportPathBuilder: Deprecated.
Deprecated in NX11.0.1. Use StiffenerBySupportPathBuilder .GetMultipleSelectionEndBoundary instead.
endbstate - Variable in class nxopen.cae.ElementAssociatedDataUtils.AskBeamData: Pin flags End B state
ENDCAP - Static variable in class nxopen.features.EmbossProjection.ProjectionOption: Indicates the geometry is End-Cap.
endcapFace() - Method in interface nxopen.features.EmbossTarget: Returns the face to produce End-Cap
License requirements: None.
endCapLimitPlaneOption() - Method in interface nxopen.features.FaceBlendBuilder: Returns the end limit plane capping option
License requirements: None.
endcapOption() - Method in interface nxopen.features.EmbossLimit: Returns the endcap method to create the End-Cap
License requirements: None.
endcapPlane() - Method in interface nxopen.features.EmbossTarget: Returns the plane to produce End-Cap
License requirements: None.
endCapPlateStock() - Method in interface nxopen.features.shipdesign.PillarBuilder: Returns the plate stock builder, which defines the seam material, grade, and thickness
License requirements: None.
endCapSize() - Method in interface nxopen.features.shipdesign.SteelSupportBuilder: Returns the end cap size.
endcapSource() - Method in interface nxopen.features.EmbossLimit: Returns the endcap source option to decide where the End-Cap comes from
License requirements: None.
endCapStock() - Method in interface nxopen.features.shipdesign.PillarBuilder: Returns the list of available material attributes.
endCapThickness() - Method in interface nxopen.features.shipdesign.PillarBuilder: Returns the end cap thickness.
endCapThickness() - Method in interface nxopen.features.shipdesign.SteelSupportBuilder: Returns the end cap thickness
License requirements: None.
endCapType() - Method in interface nxopen.features.shipdesign.SteelSupportBuilder: Returns the end cap type.
endChamferAngle() - Method in interface nxopen.geometricutilities.MiddleHoleData: Returns the end chamfer angle
License requirements: None.
endChamferAngle() - Method in interface nxopen.geometricutilities.StartHoleData: Returns the end chamfer angle
License requirements: None.
endChamferEnabled() - Method in interface nxopen.geometricutilities.MiddleHoleData: Returns the end chamfer enabled
License requirements: None.
endChamferEnabled() - Method in interface nxopen.geometricutilities.StartHoleData: Returns the end chamfer enabled
License requirements: None.
endChamferOffset() - Method in interface nxopen.geometricutilities.MiddleHoleData: Returns the end chamfer offset
License requirements: None.
endChamferOffset() - Method in interface nxopen.geometricutilities.StartHoleData: Returns the end chamfer offset
License requirements: None.
endCheckBoundary() - Method in interface nxopen.cam.TeachmodeProfileMoveBuilder: Returns the end check boundary builder
License requirements: None.
endColumn - Variable in class nxopen.uf.UFTabnot.AskMergeInfoData
EndCompensationData() - Constructor for class nxopen.features.sheetmetal.AeroFlangeBuilder.EndCompensationData
endCondition - Variable in class nxopen.uf.UFModl.RipedgeData
endConditions() - Method in interface nxopen.features.sheetmetal.MigratedPanelBuilder: Returns the end conditions
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
endConnectivity() - Method in interface nxopen.features.BridgeCurveBuilderEx: Returns the data representing connectivity information at end
License requirements: None.
endConnector - Variable in class nxopen.SectionElementData.Data: The element that is connected to the section_element, at the end_point
endConnector - Variable in class nxopen.SectionElementData.SectionElementData1: The element that is connected to the section_element, at the end_point - this can be curve or point
endConstraint() - Method in interface nxopen.features.SmoothSplineBuilder: Returns the end constraint
License requirements: None.
endContinuity() - Method in interface nxopen.features.SectionSurfaceBuilder: Deprecated.
Deprecated in NX9.0.0. Use SectionSurfaceBuilderEx instead.
endContinuity() - Method in interface nxopen.features.SectionSurfaceBuilderEx: Returns the end continuity.
endContinuity() - Method in interface nxopen.geometricutilities.CurveShapingBuilder: Returns the continuity at end of the curve
License requirements: None.
endContinuityOption() - Method in interface nxopen.features.BridgeCurveBuilder: Deprecated.
Deprecated in NX8.5.0. Use BridgeCurveBuilderEx instead.
endControlPoint - Variable in class nxopen.routing.BendReportManager.SegmentInformation: End ControlPoint .
endControlPointPosition - Variable in class nxopen.routing.BendReportManager.SegmentInformation: Location of end ControlPoint in ABS coordinates, use this instead of the end ControlPoint for S-Bends and bends greater than or equal to 180 degrees.
endCurve - Variable in class nxopen.CurveChainRule.Data: End Curve.
endCurve - Variable in class nxopen.CurveFeatureChainRule.Data: End Curve.
endCurve - Variable in class nxopen.CurveFeatureTangentRule.Data: End curve.
endCurve - Variable in class nxopen.CurveTangentRule.Data: End curve.
endCurve() - Method in interface nxopen.features.shipdesign.TraceLinesBuilder: Returns the end curve
License requirements: None.
endCurveDirectionOption() - Method in interface nxopen.features.BridgeCurveBuilder: Deprecated.
Deprecated in NX8.5.0. Use BridgeCurveBuilderEx instead.
endCut() - Method in interface nxopen.cam.DmTrimExtend: Returns the end cut
License requirements: None.
EndCut - Interface in nxopen.features.shipdesign: Represents an end cut feature
To create or edit an instance of this class, use EndCutBuilder

Created in NX8.0.0
ENDCUT - Static variable in class nxopen.features.shipdesign.PillarBuilder.EndTreatmentTypes: end cuts are applied
ENDCUT - Static variable in class nxopen.features.shipdesign.PillarBuilder.EndTypeOptions: The same end cut is applied to both ends
ENDCUT - Static variable in class nxopen.features.shipdesign.UpdateShipLibraryBuilder.ShipLibOptionType
endCutBlock() - Method in interface nxopen.features.shipdesign.ShipEndCutBuilder: Returns the end cut block (containing the library sketch block and other end cut specific settings) that defines the end cut outline
License requirements: None.
EndCutBlockBuilder - Interface in nxopen: Represents a End Cut Block Builder.
EndCutBlockBuilder.TaperTypeOption - Class in nxopen: Taper Type
EndCutBuilder - Interface in nxopen.features.shipdesign: Represents a EndCut builder.
EndCutBuilder.ConnectionTypes - Class in nxopen.features.shipdesign: This enum defines the different ways a limiting geometry can connect to the endcut face.
EndCutBuilder.DraftTypes - Class in nxopen.features.shipdesign: This enum defines the types of draft to be applied.
EndCutBuilder.LimitTypes - Class in nxopen.features.shipdesign: This enum defines the different ways users can trim the ends of a profile or a plate.
EndCutBuilder.SelectionTypes - Class in nxopen.features.shipdesign: This enum defines the Placement Face and Placement Edge Selection Type.
endCutEnd() - Method in interface nxopen.features.shipdesign.EdgeReinforcementBuilder: Returns the end cut to use at the end of the edge reinforcement system.
endCutEnd() - Method in interface nxopen.features.shipdesign.EditStockBuilder: Returns the end cut to use at the end of the stiffener sub system.
endCutEnd() - Method in interface nxopen.features.shipdesign.StiffenerSystemBuilder: Returns the end cut to use at the end of the complete stiffener system.
endCutEnd() - Method in interface nxopen.features.shipdesign.SubSystemBuilder: Returns the end cut to use at the end of the stiffener sub system.
endCutSplit() - Method in interface nxopen.features.shipdesign.SeamBuilder: Returns the end cut to use at the splits of profile systems that have been split by an intersection seam.
endCutStart() - Method in interface nxopen.features.shipdesign.EdgeReinforcementBuilder: Returns the end cut to use at the start of the edge reinforcement system.
endCutStart() - Method in interface nxopen.features.shipdesign.EditStockBuilder: Returns the end cut to use at the start of the stiffener sub system.
endCutStart() - Method in interface nxopen.features.shipdesign.StiffenerSystemBuilder: Returns the end cut to use at the start of the complete stiffener system.
endCutStart() - Method in interface nxopen.features.shipdesign.SubSystemBuilder: Returns the end cut to use at the start of the stiffener sub system.
endCutType() - Method in interface nxopen.features.shipdesign.PillarBuilder: Returns the end cut type Symmetric or TwoSided
License requirements: None.
endCutType() - Method in interface nxopen.features.shipdesign.ProfileBuilder: Returns the end cut type
License requirements: None.
endCutType() - Method in interface nxopen.features.shipdesign.StiffenerBuilder: Returns the number of end cuts to apply
License requirements: None.
endData - Variable in class nxopen.uf.UFGdt.DatumTargetLine
endDepthSkew() - Method in interface nxopen.features.SectionSurfaceBuilder: Deprecated.
Deprecated in NX9.0.0. Use SectionSurfaceBuilderEx instead.
endDepthSkew() - Method in interface nxopen.features.SectionSurfaceBuilderEx: Returns the end depth skew.
endDirection() - Method in interface nxopen.AutomaticTraceline: Returns the end direction of the traceline
License requirements: assemblies ("ASSEMBLIES MODULE")
.
endDirection() - Method in interface nxopen.features.SectionSurfaceBuilderEx: Returns the end direction.
endDirectionAngle() - Method in interface nxopen.features.BridgeCurveBuilder: Deprecated.
Deprecated in NX8.5.0. Use BridgeCurveBuilderEx instead.
enddisplaylimit - Variable in class nxopen.cae.xyplot.AxisModel.DisplayLimitsData
endDist() - Method in interface nxopen.weld.FilletBuilder: Returns the on path dimension end distance.
endDistance() - Method in interface nxopen.cam.BoundaryTurnMemberOffset: Returns the offset end distance (conical)
License requirements: None.
endDistance() - Method in interface nxopen.cam.InspectionCurveFeatureBuilder: Returns the end distance
License requirements: None.
endDistance() - Method in interface nxopen.cam.InspectionMethodBuilder: Returns the end point offset distance along the scan
License requirements: None.
endDistance() - Method in interface nxopen.cam.InspectionScanArcBuilder: Returns the End Distance of the Scan Arc
License requirements: None.
endDistance() - Method in interface nxopen.cam.InspectionScanCurve5AxisBuilder: Returns the End Distance of the Scan Curve
License requirements: None.
endDistance() - Method in interface nxopen.cam.InspectionScanCurveBuilder: Returns the End Distance of the Scan Curve
License requirements: None.
endDistance() - Method in interface nxopen.cam.InspectionScanHelixBuilder: Returns the End Distance of the Scan Helix
License requirements: None.
endDistance() - Method in interface nxopen.cam.InspectionScanLineBuilder: Returns the End Distance of the Scan Line
License requirements: None.
endDistance() - Method in interface nxopen.features.SectionCurveBuilder: Returns the the end distance
License requirements: None.
endDistance() - Method in interface nxopen.geometricutilities.CurveLengthData: Returns the end distance
License requirements: solid_modeling ("SOLIDS MODELING")
.
endDistance - Variable in class nxopen.uf.UFCurve.SectionParallelData
endDistance() - Method in interface nxopen.weld.JointmarkGuideBuilder: Returns the end distance.
endDistance() - Method in interface nxopen.weld.WeldGrooveBuilder: Returns the end limit as defined by the distance along the edge
License requirements: ugweld ("UG WELD")
.
endDistance() - Method in interface nxopen.weld.WeldPointBuilder: Returns the end dist
License requirements: ugweld ("UG WELD")
.
endDistanceBuilder() - Method in interface nxopen.cam.InspectionScanArcBuilder: Returns the End Distance of the Scan Arc
License requirements: None.
endDistanceBuilder() - Method in interface nxopen.cam.InspectionScanCurve5AxisBuilder: Returns the End Distance of the Scan Curve
License requirements: None.
endDistanceBuilder() - Method in interface nxopen.cam.InspectionScanCurveBuilder: Returns the End Distance of the Scan Curve
License requirements: None.
endDistanceBuilder() - Method in interface nxopen.cam.InspectionScanLineBuilder: Returns the End Distance of the Scan Line
License requirements: None.
endDistanceLocation() - Method in interface nxopen.weld.WeldPointBuilder: Returns the end dist location
License requirements: ugweld ("UG WELD")
.
endDrag() - Method in interface nxopen.linedesigner.FastPlacementUtilityBuilder: For end drag
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
endDrag() - Method in interface nxopen.positioning.Network: Notify the network that a sequence of drag operations has ended.
endEdge - Variable in class nxopen.EdgeChainRule.Data: End edge of edge chain.
endEdge - Variable in class nxopen.EdgeTangentRule.Data: End edge of edge tangent rule.
endEdge() - Method in interface nxopen.features.sheetmetal.BridgeTransitionBuilder: Returns the end edge
License requirements: nx_flexible_pcb ("NX Flexible PCB") OR nx_sheet_metal ("NX Sheet Metal")
.
endEdge() - Method in interface nxopen.tooling.TraverseLoopBuilder: Returns a Traverse loop by using start edge/end edge or not.
endEdgeConstraint() - Method in interface nxopen.features.MatchEdgeBuilder: Returns the value indicating type of the end edge constraint
License requirements: None.
endElevation() - Method in interface nxopen.linedesigner.StairwayEquipmentBuilder: Returns the end elevation of stairway
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
endEndCut() - Method in interface nxopen.features.shipdesign.PillarBuilder: Returns the end end cut
License requirements: None.
endEndCut() - Method in interface nxopen.features.shipdesign.StiffenerBuilder: Returns the end end cut
License requirements: None.
endEndCutBlock() - Method in interface nxopen.features.shipdesign.ProfileBuilder: Returns the end end cut block
License requirements: None.
endeventflag - Variable in class nxopen.cam.TurnAvoidancePathPointsBuilder.PointData: the end event status
endeventpath - Variable in class nxopen.cam.TurnAvoidancePathPointsBuilder.PointData: the end event path
endEventsBuilder() - Method in interface nxopen.cam.BoundaryMillingMemberSet: Returns the end events builder
License requirements: None.
endExtDistSpecValueBuilder() - Method in interface nxopen.cam.DmCmBuilder: Returns the builder of Distance, Contour Milling Drive: End of Cut
License requirements: cam_base ("CAM BASE")
.
endExtend() - Method in interface nxopen.geometricutilities.Limits: Returns the end extend builder
License requirements: None.
endExtension() - Method in interface nxopen.cam.FollowGeometryMoveBuilder: Returns the end extension
License requirements: None.
endExtension - Variable in class nxopen.routing.HealPath.AllData
endExtensionOption() - Method in interface nxopen.geometricutilities.CurveExtensionBuilder: Returns the extension options
License requirements: None.
endExtensionOption() - Method in interface nxopen.geometricutilities.SplineExtensionBuilder: Returns the extension options
License requirements: None.
endFace - Variable in class nxopen.FaceTangentRule.Data: End face of face tangent rule.
endFace() - Method in interface nxopen.features.SectionSurfaceBuilderEx: Returns the end face.
endFaceBehavior() - Method in interface nxopen.features.MoveEdgeBuilder: Returns the end face setting.
endFaceBehavior() - Method in interface nxopen.features.OffsetEdgeBuilder: Returns whether fix side faces
License requirements: None.
endFacetBody() - Method in interface nxopen.features.MeshTransformerBuilder: Returns the end facet body
License requirements: None.
endFlowDirection() - Method in interface nxopen.features.SectionSurfaceBuilder: Deprecated.
Deprecated in NX9.0.0. Use SectionSurfaceBuilderEx instead.
endFrame() - Method in interface nxopen.features.shipdesign.GeneralArrangementViewBuilder: Returns the end frame
License requirements: None.
endFrame() - Method in interface nxopen.features.shipdesign.TransFrameListItemBuilder: Returns the end frame index.
endFrameName() - Method in interface nxopen.features.shipdesign.ItFrameListItemBuilder: Returns the end reference transverse frame name.
endGaps() - Method in interface nxopen.drawings.ViewStyleSmoothEdgesBuilder: Returns the end gaps toggle on the SMOOTH EDGES tab of the View Style Dialog
License requirements: None.
endGaps() - Method in interface nxopen.drawings.ViewStyleVirtualIntersectionsBuilder: Returns the end gaps toggle on the VIRTUAL INTERSECTIONS tab of the View Style Dialog
License requirements: None.
endGapsDistance() - Method in interface nxopen.drawings.ViewStyleSmoothEdgesBuilder: Returns the end gaps data on the SMOOTH EDGES tab of the View Style Dialog
License requirements: None.
endGapsDistance() - Method in interface nxopen.drawings.ViewStyleVirtualIntersectionsBuilder: Returns the end gaps data on the VIRTUAL INTERSECTIONS tab of the View Style Dialog
License requirements: None.
endGuide() - Method in interface nxopen.features.SectionSurfaceBuilder: Deprecated.
Deprecated in NX9.0.0. Use SectionSurfaceBuilderEx instead.
endHighlightCurve() - Method in interface nxopen.features.SectionSurfaceBuilderEx: Returns the end highlight curve.
endHighlightSection() - Method in interface nxopen.features.SectionSurfaceBuilder: Deprecated.
Deprecated in NX9.0.0. Use SectionSurfaceBuilderEx instead.
endHoleData() - Method in interface nxopen.features.HolePackageBuilder: Returns the target body
License requirements: None.
EndHoleData - Interface in nxopen.geometricutilities: Represents a EndHoleData
Created in NX5.0.2
EndHoleData.FormOptions - Class in nxopen.geometricutilities: Represents hole form options.
EndHoleData.HoleDepthLimitOptions - Class in nxopen.geometricutilities: Represents hole depth limit options for threaded hole in end plate of hole series.
EndHoleData.HoleDepthOptions - Class in nxopen.geometricutilities: Represents hole depth specification options.
EndHoleData.ThreadLengthOptions - Class in nxopen.geometricutilities: Represents thread length options.
EndHoleData.ThreadRotationOptions - Class in nxopen.geometricutilities: Represents thread rotation options.
endian() - Method in interface nxopen.mechatronics.SHMSignalConnectionBuilder: Returns the endian type.
endianType - Variable in class nxopen.mechatronics.SHMSignalClientBuilder.SHMInfo: Endian type
endInferredConstraint() - Method in interface nxopen.features.AssociativeArcBuilder: Returns the end inferred constraint
License requirements: None.
endInferredConstraint() - Method in interface nxopen.features.AssociativeLineBuilder: Returns the end inferred constraint
License requirements: None.
endingUValue() - Method in interface nxopen.tooling.ReusePositioningObjectBuilder: Returns the end U value of non planar face pattern
License requirements: None.
endingVValue() - Method in interface nxopen.tooling.ReusePositioningObjectBuilder: Returns the end V value of non planar face pattern
License requirements: None.
endInsertingSection() - Method in interface nxopen.features.StyledSweepBuilder: Ends inserting section.
endIsoAngle() - Method in interface nxopen.geometricanalysis.HighlightLinesAnalysisBuilder: Returns the end angle for isoclines (uniform)
License requirements: None.
endIteration - Variable in class nxopen.cae.Post.Animation
endIterIndex() - Method in interface nxopen.cae.ResultProbeBuilder: Returns the end iter index
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
endIterValue() - Method in interface nxopen.cae.ResultProbeBuilder: Returns the end iter value
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
endlabels - Variable in class nxopen.cae.LabelRangeSelectionRecipe.LabelRangesData
endLimit() - Method in interface nxopen.features.HelixBuilder: Returns the end limit
License requirements: None.
endLimit() - Method in interface nxopen.features.shipdesign.PillarBuilder: Returns the end path limit
License requirements: None.
endLimit() - Method in interface nxopen.features.shipdesign.StiffenerBuilder: Returns the end path limit
License requirements: None.
endLimit() - Method in interface nxopen.geometricutilities.CurveLimitsData: Returns the end limit
License requirements: None.
endLimit() - Method in interface nxopen.geometricutilities.ReduceSurfaceRadiusFaceGroupBuilder: Returns the end position of reduced sheet body
License requirements: None.
endLimit() - Method in interface nxopen.tooling.SpecialFormingBuilder: Returns the end limit
License requirements: None.
endLimit() - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder: Returns the end limit
License requirements: None.
endLimit - Variable in class nxopen.uf.UFModl.BlendFacesLimitData
endLimitFaceNormalFlag() - Method in interface nxopen.features.FaceBlendBuilder: Returns the end limiting face normal flag
License requirements: None.
endLimitFacesetCollector() - Method in interface nxopen.features.FaceBlendBuilder: Returns the end limit faceset collector
License requirements: None.
endLimitPlane - Variable in class nxopen.features.FaceBlendBuilder.LimitPlanesData: End limit plane
endLimitPoint() - Method in interface nxopen.features.FaceBlendBuilder: Returns the end limit point
License requirements: None.
endLine() - Method in interface nxopen.cam.ThreadTurningBuilder: Returns the End Line
License requirements: None.
endLoadcase - Variable in class nxopen.cae.Post.Animation
endLocalUpdate() - Method in interface nxopen.Update: Ends the local update session, and clears the update mark for that session.
endLocation() - Method in interface nxopen.diagramming.ConnectionBuilder: Returns the end location of this connection.
endLocation() - Method in interface nxopen.die.DrawBeadSegmentBuilder: Returns the end location along the centerline for this segment.
endLocation - Variable in class nxopen.uf.UFGdt.TargetCylArea
endLocation1() - Method in interface nxopen.drawings.HalfSectionLineBuilder: Deprecated.
Deprecated in NX10.0.0. Use SectionViewBuilder.sectionLineSegments() instead.
endLocation1() - Method in interface nxopen.drawings.OrientedSectionLineBuilder: Deprecated.
Deprecated in NX10.0.0. This API is not supported yet and should not be used.
endLocation1() - Method in interface nxopen.drawings.PointAndAngleSectionLineBuilder: Deprecated.
Deprecated in NX10.0.0. This API is not supported yet and should not be used.
endLocation1() - Method in interface nxopen.drawings.PointToPointSectionLineBuilder: Deprecated.
Deprecated in NX10.0.0. Use SectionViewBuilder.sectionLineSegments() instead.
endLocation1() - Method in interface nxopen.drawings.RevolvedSectionLineBuilder: Deprecated.
Deprecated in NX10.0.0. This API is not supported yet and should not be used.
endLocation1() - Method in interface nxopen.drawings.SteppedSectionLineBuilder: Deprecated.
Deprecated in NX10.0.0. Use SectionViewBuilder.sectionLineSegments() instead.
endLocation2() - Method in interface nxopen.drawings.OrientedSectionLineBuilder: Deprecated.
Deprecated in NX10.0.0. This API is not supported yet and should not be used.
endLocation2() - Method in interface nxopen.drawings.PointAndAngleSectionLineBuilder: Deprecated.
Deprecated in NX10.0.0. This API is not supported yet and should not be used.
endLocation2() - Method in interface nxopen.drawings.PointToPointSectionLineBuilder: Deprecated.
Deprecated in NX10.0.0. Use SectionViewBuilder.sectionLineSegments() instead.
endLocation2() - Method in interface nxopen.drawings.RevolvedSectionLineBuilder: Deprecated.
Deprecated in NX10.0.0. This API is not supported yet and should not be used.
endLocation2() - Method in interface nxopen.drawings.SteppedSectionLineBuilder: Deprecated.
Deprecated in NX10.0.0. Use SectionViewBuilder.sectionLineSegments() instead.
endLockRegion(NXObject) - Method in interface nxopen.features.StudioXformBuilderEx: End Lock Region operation to the selected xform object
License requirements: studio_free_form ("STUDIO FREE FORM")
.
endMove() - Method in interface nxopen.features.subdivision.CageManipulatorData: Releases the data prepared at the beginning of the move.
endMoveComponent() - Method in interface nxopen.positioning.ComponentPositioner: Ends the mode of operation started by ComponentPositioner.beginMoveComponent() All constraints created while in that mode will be deleted.
endMoveComponentInWorkset() - Method in interface nxopen.positioning.ComponentPositioner: Ends the mode of operation started by ComponentPositioner.beginMoveComponentInWorkset() All constraints created while in that mode will be deleted.
endNode() - Method in interface nxopen.geometricutilities.NonInflectingLawBuilder: Returns the end node
License requirements: solid_modeling ("SOLIDS MODELING") OR free_form_modeling ("FREE-FORM MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
endNode() - Method in interface nxopen.geometricutilities.SShapedLawBuilder: Returns the end node
License requirements: solid_modeling ("SOLIDS MODELING") OR free_form_modeling ("FREE-FORM MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
endNodes - Variable in class nxopen.uf.UFSf.AskElementEdgesData
endNormal() - Method in interface nxopen.features.AssociativeLineBuilder: Deprecated.
Deprecated in NX11.0.1. Use other versions of AssociativeLineBuilder.lineEndNormal() .
endNormal - Variable in class nxopen.routing.BendReportManager.SegmentInformation: Normal of curve at end points
endObject() - Method in interface nxopen.features.BridgeCurveBuilder: Deprecated.
Deprecated in NX8.5.0. Use BridgeCurveBuilderEx instead.
endObject() - Method in interface nxopen.features.BridgeCurveBuilderEx: Returns the end object
License requirements: None.
endObjectOption() - Method in interface nxopen.features.BridgeCurveBuilder: Deprecated.
Deprecated in NX8.5.0. Use BridgeCurveBuilderEx instead.
endObjectType() - Method in interface nxopen.features.BridgeCurveBuilderEx: Returns the end object type
License requirements: None.
endOffset - Variable in class nxopen.annotations.OrdinateDimension.DoglegPreferences
endOffset() - Method in interface nxopen.AutomaticTraceline: Returns the end offset of the traceline
License requirements: assemblies ("ASSEMBLIES MODULE")
.
endOffset() - Method in interface nxopen.cae.WeldBuilder: Returns the distance of the last point from the end of the edge(s)
License requirements: None.
endOffset() - Method in interface nxopen.cam.RoughFinishTurningBuilder: Returns the end offset
License requirements: None.
endOffset() - Method in interface nxopen.cam.ThreadTurningBuilder: Returns the End Offset
License requirements: None.
endOffset() - Method in interface nxopen.features.shipdesign.ExcessMaterialBuilder: Returns the end offset (only applicable for excess material with variable offsets, fitup and constant offset excess material will ignore this value)
License requirements: None.
endOffset() - Method in interface nxopen.features.shipdesign.PillarBuilder: Returns the offset used to determine where the support ends (used with PillarBuilder.CreationMethod.SPECIFY_LINE and PillarBuilder.CreationMethod.SPECIFY_CSYS creation methods).
endOffset() - Method in interface nxopen.features.shipdesign.SteelSupportBuilder: Returns the offset used to determine where the support ends (used with "SpecifyLine" and "SpecifyCsys" creation methods)
License requirements: None.
endOffset() - Method in interface nxopen.geometricutilities.FeatureOffset: Returns the End Offset
License requirements: None.
endOffset() - Method in interface nxopen.routing.OverstockBuilder: Returns the end offset value for OverstockBuilder.ApplicationType.INTERVAL method.
endOffset0() - Method in interface nxopen.geometricutilities.CurveLengthBuilder: Returns the end 1 length
License requirements: None.
endOffset1() - Method in interface nxopen.geometricutilities.CurveLengthBuilder: Returns the end 2 length
License requirements: None.
endOffsetA1() - Method in interface nxopen.cae.BeamEADBuilder: Returns the end A offset component 1 expression of the element
License requirements: nx_masterfem ("Finite Element Modeling")
.
endOffsetA2() - Method in interface nxopen.cae.BeamEADBuilder: Returns the end A offset component 2 expression of the element
License requirements: nx_masterfem ("Finite Element Modeling")
.
endOffsetA3() - Method in interface nxopen.cae.BeamEADBuilder: Returns the end A offset component 3 expression of the element
License requirements: nx_masterfem ("Finite Element Modeling")
.
endOffsetAState() - Method in interface nxopen.cae.BeamEADBuilder: Returns the state drives the commit action
License requirements: nx_masterfem ("Finite Element Modeling")
.
endOffsetB1() - Method in interface nxopen.cae.BeamEADBuilder: Returns the end B offset component 1 expression of the element
License requirements: nx_masterfem ("Finite Element Modeling")
.
endOffsetB2() - Method in interface nxopen.cae.BeamEADBuilder: Returns the end B offset component 2 expression of the element
License requirements: nx_masterfem ("Finite Element Modeling")
.
endOffsetB3() - Method in interface nxopen.cae.BeamEADBuilder: Returns the end B offset component 3 expression of the element
License requirements: nx_masterfem ("Finite Element Modeling")
.
endOffsetBState() - Method in interface nxopen.cae.BeamEADBuilder: Returns the state drives the commit action
License requirements: nx_masterfem ("Finite Element Modeling")
.
endOffsetLock() - Method in interface nxopen.routing.OverstockBuilder: Returns the end offset lock state.
endOfPath() - Method in interface nxopen.cam.BoundaryTurnMemberEvents: Returns the end of path events
License requirements: cam_base ("CAM BASE")
.
endOfPath() - Method in interface nxopen.cam.OperationBuilder: Returns the end event builder
License requirements: None.
endOfPathBuilder() - Method in interface nxopen.cam.TurnRoughFinishLocalReturnBuilder: Returns the end event builder
License requirements: cam_base ("CAM BASE")
.
endOfSimulation(UFVariant) - Method in interface nxopen.uf.UFSim: Refer to UF_SIM_end_of_simulation for documentation.
endOfTestCut() - Method in interface nxopen.cam.TurnRoughFinishTestCut: Returns the end of test cut
License requirements: cam_base ("CAM BASE")
.
endOrientation() - Method in interface nxopen.die.SteelInsertBuilder: Returns the end orientation of the steelinsert
License requirements: ug_die_design ("Die Design")
.
endParam - Variable in class nxopen.uf.UFCurve.Conic
endParam - Variable in class nxopen.uf.UFCurve.Spline
endParameter() - Method in interface nxopen.features.vehicledesign.CloseRangeBlindVolumeListItemBuilder: Returns the end parameter value on the path curve of the blind volume area.
endParameter - Variable in class nxopen.uf.UFView.VdeData
endParameter - Variable in class nxopen.uf.UFView.VdeDataAndType
endParms - Variable in class nxopen.routing.HealPath.AllData
endPath() - Method in interface nxopen.weld.WeldBeadPathBuilder: Returns the location at which to end the sweep of the bead shape.
endPct - Variable in class nxopen.uf.UFCurve.SectionPerpcrvData
endPercent() - Method in interface nxopen.cam.BladeCutLevels: Returns the end %
License requirements: None.
endPercent - Variable in class nxopen.routing.SegmentManager.SubdivideOption: End Percentage; start_percent < end_percent <= 100.0
endPercentage() - Method in interface nxopen.cam.InspectionCurveFeatureBuilder: Returns the end percentage
License requirements: None.
endPercentage() - Method in interface nxopen.cam.InspectionMethodBuilder: Returns the end Percentage along the scan
License requirements: None.
endPercentage() - Method in interface nxopen.cam.InspectionScanArcBuilder: Returns the End Percentage of the Scan Arc
License requirements: None.
endPercentage() - Method in interface nxopen.cam.InspectionScanCurve5AxisBuilder: Returns the End Percentage of the Scan Curve
License requirements: None.
endPercentage() - Method in interface nxopen.cam.InspectionScanCurveBuilder: Returns the End Percentage of the Scan Curve
License requirements: None.
endPercentage() - Method in interface nxopen.cam.InspectionScanHelixBuilder: Returns the End Percentage of the Scan Helix
License requirements: None.
endPercentage() - Method in interface nxopen.cam.InspectionScanLineBuilder: Returns the End Percentage of the Scan Line
License requirements: None.
endPercentage() - Method in interface nxopen.features.PointSetBuilder: Returns the percentage of the curve at which to stop creating points.
endPercentage() - Method in interface nxopen.features.SectionCurveBuilder: Returns the end percentage.
endPercentageSection() - Method in interface nxopen.features.PointSetBuilder: Returns a section containing an object (curve, edge, or point) that will be used to determine an intersection with the curves/edges selected for setting the EndPercentage Only used when type is PointSetBuilder.Types.CURVE_POINTS , and when PointSetBuilder.curvePointsBy() is PointSetBuilder.CurvePointsType.EQUAL_ARC_LENGTH , PointSetBuilder.CurvePointsType.EQUAL_PARAMETERS , or PointSetBuilder.CurvePointsType.GEOMETRIC_PROGRESSION .
endPerpendicularFace() - Method in interface nxopen.features.BridgeCurveBuilder: Deprecated.
Deprecated in NX8.5.0. Use BridgeCurveBuilderEx instead.
endPlane() - Method in interface nxopen.die.TrimTaskBuilder: Returns the end plane of the trim task
License requirements: die_engineering ("DIE ENGINEERING")
.
endPlane() - Method in interface nxopen.features.sheetmetal.JoggleBuilder: Returns the end plane
License requirements: None.
endPlane() - Method in interface nxopen.features.shipdesign.PillarBuilder: Returns the end plane (only used with PillarBuilder.CreationMethod.TWO_PLANESAND_LINES creation method).
endPlane() - Method in interface nxopen.features.shipdesign.PlateChamferBuilder: Returns the end plane
License requirements: None.
endPlane() - Method in interface nxopen.features.shipdesign.SteelSupportBuilder: Returns the end plane (only used with "TwoPlanesandLines" creation method)
License requirements: None.
endPlaneSelected() - Method in interface nxopen.tooling.DieEngTrimTaskBuilder: Returns the end plane selected.
endPoint() - Method in interface nxopen.annotations.LineComponent: Returns the line end point in absolute coordinates.
endPoint() - Method in interface nxopen.annotations.RegionBuilder: Returns the end point Only available when the region type is RegionBuilder.Types.CYLINDRICAL_REGION
License requirements: None.
endPoint() - Method in interface nxopen.AutomaticTraceline: Returns the end point of the traceline
License requirements: assemblies ("ASSEMBLIES MODULE")
.
endPoint() - Method in interface nxopen.cae.responsesimulation.ResponseResultsEvaluationSettingBuilder: Returns the end value of domain setting.
endPoint() - Method in interface nxopen.cam.CircularAboutAxisMoveBuilder: Returns the arc end point
License requirements: None.
endPoint() - Method in interface nxopen.cam.FollowCurveMoveBuilder: Returns the end location
License requirements: None.
endPoint() - Method in interface nxopen.cam.FollowPartMoveBuilder: Returns the end location
License requirements: None.
endPoint() - Method in interface nxopen.cam.PathLinearMotion: Returns the end point of the motion
License requirements: None.
endPoint() - Method in interface nxopen.cam.SplitSubopCommand: Returns the end point value
License requirements: None.
endPoint() - Method in interface nxopen.cam.TabPointDataBuilder: Returns the tab end point
License requirements: cam_base ("CAM BASE")
.
endPoint() - Method in interface nxopen.cam.VectorDistanceMoveBuilder: Returns the end point in the direction specified
License requirements: None.
endPoint() - Method in interface nxopen.die.DrawBeadBuilder: Returns the point location defining the end of the centerline.
endPoint() - Method in interface nxopen.features.AssociativeArcBuilder: Returns the end point - this should be a smart point created using one of PointCollection.createPoint(nxopen.Point3d)
License requirements: None.
endPoint() - Method in interface nxopen.features.AssociativeLineBuilder: Returns the end point - this should be a smart point created using one of PointCollection.createPoint(nxopen.Point3d)
License requirements: None.
endPoint() - Method in interface nxopen.features.GeneralConicBuilder: Returns the end point.
endPoint() - Method in interface nxopen.features.GeodesicLineBuilder: Returns the end point of line
License requirements: None.
ENDPOINT - Static variable in class nxopen.geometricanalysis.CurveAnalysisDisplay.ShowFlagType: Deprecated.

show endpoint
endPoint() - Method in interface nxopen.geometricutilities.CurveExtensionBuilder: Returns the point up to which end is extended
License requirements: None.
endPoint() - Method in interface nxopen.geometricutilities.ModlMotion: Returns the end point of ModlMotion.Options.ROTATE_BY_THREE_POINTS motion option.
endPoint() - Method in interface nxopen.geometricutilities.SelectDividingObjectBuilder: Returns the end point
License requirements: None.
endPoint() - Method in interface nxopen.geometricutilities.SplineExtensionBuilder: Returns the point up to which end is extended
License requirements: None.
endPoint() - Method in interface nxopen.Line: Returns the end point of the line
License requirements: None.
endPoint() - Method in interface nxopen.mechanicalrouting.PathTransitionBuilder: Returns the end point that defines the end of the path transition.
endPoint - Variable in class nxopen.routing.HealPath.AllData
endPoint - Variable in class nxopen.routing.ISegment.EndPointsData: Location of end 1 in ABS coordinates
endPoint() - Method in interface nxopen.routing.OverstockBuilder: Returns the end point that defines the end of the overstock for OverstockBuilder.ApplicationType.POINT_TO_POINT method.
endPoint - Variable in class nxopen.SectionElementData.Data: End Point
endPoint - Variable in class nxopen.SectionElementData.SectionElementData1: End Point
endPoint() - Method in interface nxopen.SketchConicBuilder: Returns the end point
License requirements: None.
endPoint - Variable in class nxopen.uf.UFCurve.Line
endPoint - Variable in class nxopen.uf.UFDrf.GetSymbolDividerData
endPoint - Variable in class nxopen.uf.UFGdt.DatumTargetLine
endPoint - Variable in class nxopen.uf.UFGdt.TargetCylArea
endPointCoordinates() - Method in interface nxopen.annotations.ILineTarget: Returns the target end point coordinates
License requirements: None.
endPointDirection() - Method in interface nxopen.features.BridgeCurveBuilder: Deprecated.
Deprecated in NX8.5.0. Use BridgeCurveBuilderEx instead.
endpointDisplayColor() - Method in interface nxopen.preferences.SessionModeling: Returns the color for display endpoints for curves.
endpointDisplayInheritColor() - Method in interface nxopen.preferences.SessionModeling: Returns the endpoint color inherit option, for display with curves.
endpointDisplayStyle() - Method in interface nxopen.preferences.SessionModeling: Returns the style (2D disk, mark, etc.) of the endpoints for display of curves.
endPointMethods() - Method in interface nxopen.features.shipdesign.OrientationRegionItemBuilder: Returns the boundary definition at the end of this region.
endPointOfOverstock() - Method in interface nxopen.routing.OverstockApplication: Returns the end point of overstock on the path.
endPointOptions() - Method in interface nxopen.features.AssociativeArcBuilder: Returns the end point options
License requirements: None.
endPointOptions() - Method in interface nxopen.features.AssociativeLineBuilder: Returns the end point options
License requirements: None.
endPointReference() - Method in interface nxopen.features.AssociativeArcBuilder: Returns the end point reference
License requirements: None.
endPointReference() - Method in interface nxopen.features.AssociativeLineBuilder: Returns the end point reference
License requirements: None.
EndPointsData() - Constructor for class nxopen.DatumAxis.EndPointsData
EndPointsData() - Constructor for class nxopen.routing.ISegment.EndPointsData
EndpointsDiameterData() - Constructor for class nxopen.cae.CylinderBoundingVolume.EndpointsDiameterData
endPointX() - Method in interface nxopen.geometricanalysis.CurveContinuityBuilder: Returns the end point x value
License requirements: None.
endPointY() - Method in interface nxopen.geometricanalysis.CurveContinuityBuilder: Returns the end point y value
License requirements: None.
endPointZ() - Method in interface nxopen.geometricanalysis.CurveContinuityBuilder: Returns the end point z value
License requirements: None.
endPort - Variable in class nxopen.routing.Stock.PortsData: Port at the end of the last segment.
endPositionOnGuide() - Method in interface nxopen.features.shipdesign.EdgeCutBuilder: Returns the offset from the end of the guide curve (or end trim object) where cut placement will end.
endPositionType() - Method in interface nxopen.cam.TeachmodeLinearMoveBuilder: Returns the Type of End Position Definition
License requirements: None.
endProfileOriginCurve() - Method in interface nxopen.routing.StockTransitionBuilder: Returns the origin curve of end profile
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
endProfileOriginCurveDirection() - Method in interface nxopen.routing.StockTransitionBuilder: Returns the direction of origin curve of end profile
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
endPt - Variable in class nxopen.cam.CamOperationCircularMotionDataType
endPt - Variable in class nxopen.cam.CamOperationHelicalMotionDataType
endPt - Variable in class nxopen.cam.CamOperationLinearMotionDataType
endPt - Variable in class nxopen.uf.UFCurve.Genconic
endPt - Variable in class nxopen.uf.UFSf.EdgeAskEndPointsData
endRadius() - Method in interface nxopen.features.sheetmetal.BridgeTransitionBuilder: Deprecated.
Deprecated in NX10.0.2. Use Expression.setRightHandSide(java.lang.String) on the Expression object returned from BendOptions.bendRadius() instead.
endRadius1() - Method in interface nxopen.features.sheetmetal.BendTaperBuilder: Returns the end radius for side 1
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
endRadius2() - Method in interface nxopen.features.sheetmetal.BendTaperBuilder: Returns the end radius for side 2
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
endRcp - Variable in class nxopen.routing.ISegment.EndRcpsData: RCP defining end of segment
endRcp - Variable in class nxopen.routing.SBendCorner.SBendData: S-Bend end Control point
endrcp - Variable in class nxopen.routing.SplinePathBuilder.StartAndEndRcpData: The target ControlPoint.
EndRcpsData() - Constructor for class nxopen.routing.ISegment.EndRcpsData
endReferenceCsys() - Method in interface nxopen.features.AssociativeArcBuilder: Returns the end reference coordinate system
License requirements: None.
endReferenceCsys() - Method in interface nxopen.features.AssociativeLineBuilder: Returns the end reference coordinate system
License requirements: None.
endReferencePoint() - Method in interface nxopen.features.BridgeCurveBuilder: Deprecated.
Deprecated in NX8.5.0. Use BridgeCurveBuilderEx instead.
endRegion() - Method in interface nxopen.features.sheetmetal.MetaformBuilder: Returns the end region Metaform feature will map geometry "From" surfaces "To" surfaces.
endRegionCurve() - Method in interface nxopen.features.sheetmetal.SMBoundaryConditionBuilder: Returns the end region curve This input is required if the Constraint Type is NOT SMBoundaryConditionBuilder.ConstraintTypes.POINT_TO_POINT .
endRegionPoint() - Method in interface nxopen.features.sheetmetal.SMBoundaryConditionBuilder: Returns the end region point This input is required only if the Constraint Type is SMBoundaryConditionBuilder.ConstraintTypes.POINT_TO_POINT .
endReleaseA1() - Method in interface nxopen.cae.BeamEADBuilder: Returns the get end release setting turns on or off the DOF 1 for end A
License requirements: nx_masterfem ("Finite Element Modeling")
.
endReleaseA2() - Method in interface nxopen.cae.BeamEADBuilder: Returns the get end release setting turns on or off the DOF 2 for end A
License requirements: nx_masterfem ("Finite Element Modeling")
.
endReleaseA3() - Method in interface nxopen.cae.BeamEADBuilder: Returns the get end release setting turns on or off the DOF 3 for end A
License requirements: nx_masterfem ("Finite Element Modeling")
.
endReleaseA4() - Method in interface nxopen.cae.BeamEADBuilder: Returns the get end release setting turns on or off the DOF 4 for end A
License requirements: nx_masterfem ("Finite Element Modeling")
.
endReleaseA5() - Method in interface nxopen.cae.BeamEADBuilder: Returns the get end release setting turns on or off the DOF 5 for end A
License requirements: nx_masterfem ("Finite Element Modeling")
.
endReleaseA6() - Method in interface nxopen.cae.BeamEADBuilder: Returns the get end release setting turns on or off the DOF 6 for end A
License requirements: nx_masterfem ("Finite Element Modeling")
.
endReleaseAState() - Method in interface nxopen.cae.BeamEADBuilder: Returns the method to get the state of end release A
License requirements: nx_masterfem ("Finite Element Modeling")
.
endReleaseB1() - Method in interface nxopen.cae.BeamEADBuilder: Returns the get end release setting turns on or off the DOF 1 for end B
License requirements: nx_masterfem ("Finite Element Modeling")
.
endReleaseB2() - Method in interface nxopen.cae.BeamEADBuilder: Returns the get end release setting turns on or off the DOF 2 for end B
License requirements: nx_masterfem ("Finite Element Modeling")
.
endReleaseB3() - Method in interface nxopen.cae.BeamEADBuilder: Returns the get end release setting turns on or off the DOF 3 for end B
License requirements: nx_masterfem ("Finite Element Modeling")
.
endReleaseB4() - Method in interface nxopen.cae.BeamEADBuilder: Returns the get end release setting turns on or off the DOF 4 for end B
License requirements: nx_masterfem ("Finite Element Modeling")
.
endReleaseB5() - Method in interface nxopen.cae.BeamEADBuilder: Returns the get end release setting turns on or off the DOF 5 for end B
License requirements: nx_masterfem ("Finite Element Modeling")
.
endReleaseB6() - Method in interface nxopen.cae.BeamEADBuilder: Returns the get end release setting turns on or off the DOF 6 for end B
License requirements: nx_masterfem ("Finite Element Modeling")
.
endReleaseBState() - Method in interface nxopen.cae.BeamEADBuilder: Returns the method to get the state of end release B
License requirements: nx_masterfem ("Finite Element Modeling")
.
endRevolveAngle() - Method in interface nxopen.cae.AxiSymmetricParameters: Returns the end revolve angle
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
endRow - Variable in class nxopen.uf.UFTabnot.AskMergeInfoData
endRunSmartRule(StandardPartItemBuilder) - Method in interface nxopen.features.shipdesign.StandardPartFrameworkBuilder: End run the smart rules.
ENDS_APEX_HILITE - Static variable in class nxopen.features.SectionSurfaceBuilder.Types: Deprecated.

ends apex hilite
ENDS_APEX_RHO - Static variable in class nxopen.features.SectionSurfaceBuilder.Types: Deprecated.

ends apex rho
ENDS_APEX_SHOULDER - Static variable in class nxopen.features.SectionSurfaceBuilder.Types: Deprecated.

ends apex shoulder
ENDS_OF_GUIDES - Static variable in class nxopen.features.SweptBuilder.SectionLocationTypes: Ends of Guides
ENDS_SLOPE_CUBIC - Static variable in class nxopen.features.SectionSurfaceBuilder.Types: Deprecated.

ends slope cubic
ENDS_SLOPE_HILITE - Static variable in class nxopen.features.SectionSurfaceBuilder.Types: Deprecated.

ends slope hilite
ENDS_SLOPE_RHO - Static variable in class nxopen.features.SectionSurfaceBuilder.Types: Deprecated.

ends slope rho
ENDS_SLOPE_SHOULDER - Static variable in class nxopen.features.SectionSurfaceBuilder.Types: Deprecated.

ends slope shoulder
endscale - Variable in class nxopen.cae.xyplot.AxisModel.CalculateZoomScaleData
endSection() - Method in interface nxopen.features.BridgeCurveBuilderEx: Returns the end section
License requirements: None.
endSection() - Method in interface nxopen.features.sheetmetal.LoftedFlangeBuilder: Returns the end section of the lofted flange.The section profile should be open looped.
endSectionPoint() - Method in interface nxopen.features.sheetmetal.LoftedFlangeBuilder: Returns the start/end point of the end section.It can be start/end point of the section profile.
endSelection0() - Method in interface nxopen.geometricutilities.CurveLengthBuilder: Returns the select object for end 1
License requirements: None.
endSelection1() - Method in interface nxopen.geometricutilities.CurveLengthBuilder: Returns the select object for end 2
License requirements: None.
endSetbackDis - Variable in class nxopen.uf.UFModl.BlendEdge
endShape() - Method in interface nxopen.tooling.RunnerBuilder: Returns the guide end shape type of runner.
endShapeCurve() - Method in interface nxopen.features.SectionSurfaceBuilder: Deprecated.
Deprecated in NX9.0.0. Use SectionSurfaceBuilderEx instead.
endShapeCurve() - Method in interface nxopen.features.SectionSurfaceBuilderEx: Returns the end shape curve.
endSize() - Method in interface nxopen.cae.MeshControlBuilder: Returns the value stored in end size field.
endSketch() - Method in interface nxopen.features.sheetmetal.LoftedFlangeBuilder: Returns the end section sketch as slave.
endSlope() - Method in interface nxopen.features.SectionSurfaceBuilder: Deprecated.
Deprecated in NX9.0.0. Use SectionSurfaceBuilderEx instead.
endSlopeCurve() - Method in interface nxopen.features.SectionSurfaceBuilderEx: Returns the end slope curve.
endStep() - Method in interface nxopen.cam.DmTrimExtend: Returns the end step
License requirements: None.
endStopsParent() - Method in interface nxopen.die.RotorBuilder: Returns the end stops parent builder of the rotor.
endSurface() - Method in interface nxopen.features.SectionSurfaceBuilder: Deprecated.
Deprecated in NX9.0.0. Use SectionSurfaceBuilderEx instead.
endSurfaceDirectionOption() - Method in interface nxopen.features.BridgeCurveBuilder: Deprecated.
Deprecated in NX8.5.0. Use BridgeCurveBuilderEx instead.
endSystemDialogCustomization() - Method in interface nxopen.cam.CAMSession: End the dialog customization process, this API is only for internal use and so will not be documented
License requirements: None.
endTagmag - Variable in class nxopen.uf.UFModl.StycornerCrvOpt
endTangent() - Method in interface nxopen.features.AssociativeArcBuilder: Returns the end tangent - point can be passed in SELECT_OBJECT which is used in case of multiple solutions
License requirements: None.
endTangent() - Method in interface nxopen.features.AssociativeLineBuilder: Returns the end tangent - point can be passed in SELECT_OBJECT which is used in case of multiple solutions
License requirements: None.
endTangent - Variable in class nxopen.uf.UFSf.EdgeAskEndPointsData
endTangentDirection() - Method in interface nxopen.geometricutilities.TransitionCurveBuilder: Returns the end tangent direction
License requirements: None.
endTangentMagnitude() - Method in interface nxopen.features.BridgeCurveBuilder: Deprecated.
Deprecated in NX8.5.0. Use BridgeCurveBuilderEx instead.
endTangentMagnitude() - Method in interface nxopen.geometricutilities.TangentMagnitudeBuilder: Returns the end tangent magnitude
License requirements: None.
endTangentMagnitude() - Method in interface nxopen.geometricutilities.TransitionCurveBuilder: Returns the end tangent magnitude
License requirements: None.
endTaper() - Method in interface nxopen.die.DrawBeadBuilder: Returns the taper definition at the end of the bead.
endTaskEnvironment() - Method in interface nxopen.Session: This method is called by the NX user interface when leaving a task environment.
EndTeeData() - Constructor for class nxopen.pid.PipeBuilder.EndTeeData
endTime - Variable in class nxopen.assemblies.ClearanceSet.Summary: The ending time of the last analysis run (in seconds since 00:00:00 1/1/1970.
endTime - Variable in class nxopen.uf.UFClear.Summary
endTimer(short) - Method in interface nxopen.uf.UF: Refer to UF_end_timer for documentation.
endToEnd() - Method in interface nxopen.geometricutilities.MatchSurfaceBuilder: Returns the option to match end-to-end, between the end of edit edge and the reference egde or curve
License requirements: None.
endToolAxis() - Method in interface nxopen.cam.FollowCurveMoveBuilder: Returns the end tool axis
License requirements: None.
endToolAxis - Variable in class nxopen.uf.UFPath.CircularMotion
endToolAxis - Variable in class nxopen.uf.UFPath.HelicalMotion
endToolPath(UFVariant) - Method in interface nxopen.uf.UFPath: Refer to UF_PATH_end_tool_path for documentation.
endTreatmentType() - Method in interface nxopen.features.shipdesign.PillarBuilder: Returns the end treatment type: Endcut or Cap
License requirements: None.
endType() - Method in interface nxopen.cam.InspectionCparlnFeatureBuilder: Returns the end type of the bounded slot or tab (round or square)
License requirements: None.
endType() - Method in interface nxopen.features.sheetmetal.BeadBuilder: Returns the bead end type .
endType() - Method in interface nxopen.features.sheetmetal.LouverBuilder: Returns the end type for the louver.
endType() - Method in interface nxopen.features.sheetmetal.MiterOptions: Returns the miter end type.
endType - Variable in class nxopen.uf.UFCurve.Constraint
endType0() - Method in interface nxopen.geometricutilities.CurveLengthBuilder: Returns the end 1 type
License requirements: None.
endType1() - Method in interface nxopen.geometricutilities.CurveLengthBuilder: Returns the end 2 type
License requirements: None.
endTypeOption() - Method in interface nxopen.features.shipdesign.PillarBuilder: Returns the end type Option
License requirements: None.
endU() - Method in interface nxopen.cam.InspectionUVGridBuilder: Returns the end value in U
License requirements: None.
endUDeg() - Method in interface nxopen.cam.InspectionUVGridBuilder: Returns the end degrees value in U
License requirements: None.
endUdeSet() - Method in interface nxopen.cam.NCGroupBuilder: Returns the end ude set
License requirements: None.
endUdeSet() - Method in interface nxopen.cam.OperationBuilder: Returns the end ude set
License requirements: None.
endUDist() - Method in interface nxopen.cam.InspectionUVGridBuilder: Returns the end distance value in U
License requirements: None.
endUDistance() - Method in interface nxopen.cam.InspectionSurfaceFeatureBuilder: Returns the end distance in the U direction
License requirements: None.
endUMode() - Method in interface nxopen.cam.InspectionUVGridBuilder: Returns the end U mode
License requirements: None.
endUPercent() - Method in interface nxopen.cam.InspectionSurfaceFeatureBuilder: Returns the end percent in the U direction
License requirements: None.
endUSweep() - Method in interface nxopen.cam.InspectionUVGridBuilder: Returns the sweep value in U
License requirements: None.
endV() - Method in interface nxopen.cam.InspectionUVGridBuilder: Returns the end value in V
License requirements: None.
endValue() - Method in interface nxopen.cae.responsesimulation.FrequencyDefinition: Returns the end value of frequency range.
endValue() - Method in interface nxopen.geometricutilities.CurveExtensionBuilder: Returns the end value
License requirements: None.
endValue() - Method in interface nxopen.geometricutilities.LawBuilder: Returns the end value.
endValue() - Method in interface nxopen.geometricutilities.SplineExtensionBuilder: Returns the end value
License requirements: None.
endValue() - Method in interface nxopen.tooling.BurringInsertBuilder: Returns the end height value of blank.
endVDeg() - Method in interface nxopen.cam.InspectionUVGridBuilder: Returns the end degrees value in V
License requirements: None.
endVDist() - Method in interface nxopen.cam.InspectionUVGridBuilder: Returns the end distance value in V
License requirements: None.
endVDistance() - Method in interface nxopen.cam.InspectionSurfaceFeatureBuilder: Returns the end distance in the V direction
License requirements: None.
endVector() - Method in interface nxopen.features.BridgeCurveBuilderEx: Returns the end vector representing a plane for symmetric modeling
License requirements: None.
endVector - Variable in class nxopen.routing.HealPath.AllData
endVector() - Method in interface nxopen.weld.FilletBuilder: Returns the end direction reversed or not.
endVectorObject() - Method in interface nxopen.features.BridgeCurveBuilder: Deprecated.
Deprecated in NX8.5.0. Use BridgeCurveBuilderEx instead.
endVMode() - Method in interface nxopen.cam.InspectionUVGridBuilder: Returns the end V mode
License requirements: None.
endVPercent() - Method in interface nxopen.cam.InspectionSurfaceFeatureBuilder: Returns the end percent in the V direction
License requirements: None.
endVSweep() - Method in interface nxopen.cam.InspectionUVGridBuilder: Returns the sweep value in V
License requirements: None.
endWireframe - Variable in class nxopen.FollowFilletRule.Data: End wireframe.
endXTemplateOffset() - Method in interface nxopen.features.shipdesign.ShellTemplateBuilder: Returns the expression defining the value of the end offset of the template for set 1 (X).
endYTemplateOffset() - Method in interface nxopen.features.shipdesign.ShellTemplateBuilder: Returns the expression defining the value of the end offset of the template for set 2 (Y).
ENERGY - Static variable in class nxopen.cae.FemSignalProcessingSignalAttributes.CorrectionModes: Energy
ENERGY - Static variable in class nxopen.cae.SignalProcessingPlotData.CorrectionMode: Energy
ENERGY - Static variable in class nxopen.cae.SimLoadRecipeFunctionAttributes.CorrectionModes: Energy
ENERGY - Static variable in class nxopen.cae.XyFunctionMeasure: Energy
ENERGY_BTU - Static variable in class nxopen.cae.XyFunctionUnit: Energy Unit: Btu
ENERGY_DAMAGE - Static variable in class nxopen.cae.Result.Quantity
ENERGY_DAMPING - Static variable in class nxopen.cae.Result.Quantity
ENERGY_DENSITY - Static variable in class nxopen.cae.Result.Quantity
ENERGY_J - Static variable in class nxopen.cae.XyFunctionUnit: Energy Unit: Joule
ENERGY_LBFIN - Static variable in class nxopen.cae.XyFunctionUnit: Energy Unit: Pound Force Inch
ENERGY_LBM_FT2SEC2 - Static variable in class nxopen.cae.XyFunctionUnit: Energy Unit: Pounds Mass-Feet Squared Per Second Squared
ENERGY_MICROJ - Static variable in class nxopen.cae.XyFunctionUnit: Energy Unit: MicroJoules
ENERGY_MJ - Static variable in class nxopen.cae.XyFunctionUnit: Energy Unit: millijoules
ENERGY_STRAIN - Static variable in class nxopen.cae.Result.Quantity
energyCorrectionFactor() - Method in interface nxopen.cae.FemSignalProcessingSignalAttributes: Returns the energy correction factor
License requirements: None.
energyCorrectionFactor() - Method in interface nxopen.cae.SimLoadRecipeFunctionAttributes: Returns the default energy correction factor of the functions in the file
License requirements: None.
energyLoss() - Method in interface nxopen.motion.TirePropertyCdBuilder: Deprecated.
Deprecated in NX12.0.0. Use TirePropertyCdBuilder.wearIndicatorPerSegment() instead.
energyLossOfSpecificEntities() - Method in interface nxopen.motion.TirePropertyCdBuilder: Returns the Energy Loss Of Specific Entities.
energyLossPerSegment() - Method in interface nxopen.motion.TirePropertyCdBuilder: Returns the Energy Loss Per Cross Section Segment Activates specific CDTire results: eloss_gl, eloss_01 ... eloss_29;
License requirements: None.
enforceCreState - Variable in class nxopen.uf.UFSmd.GenPrefs
ENFORCED_MOTION - Static variable in class nxopen.cae.responsesimulation.ExcitationBuilder.ExcitationLocationType
ENFORCED_MOTION - Static variable in class nxopen.cae.responsesimulation.NodalFunctionExcitation.Type
enforcedConstraints() - Method in interface nxopen.AttributeTemplatesBuilder: Returns the enforced constraints.
ENGAGE - Static variable in class nxopen.cam.CamOperationMotionType
ENGAGE - Static variable in class nxopen.cam.CamPathMotionType
ENGAGE - Static variable in class nxopen.cam.MoveBuilder.Motion: Engage
engage() - Method in interface nxopen.cam.NcmHoleMachining: Returns the engage settings
License requirements: None.
engage() - Method in interface nxopen.cam.PathDisplayColors: Returns the color engage
License requirements: None.
ENGAGE - Static variable in class nxopen.cam.TurnThreadEngageRetractBuilder.MoveTypes: Engage(Retract)
ENGAGE_OR_RETURN - Static variable in class nxopen.cam.TurnAvoidancePathPointsBuilder.FeedrateModesTypes: Feed Rate: Radial then Axial
engageAgainstCheckBuilder() - Method in interface nxopen.cam.NcmScBuilder: Returns the against check engage settings
License requirements: None.
engageBuilder() - Method in interface nxopen.cam.NcmTurnThreadBuilder: Returns the Engage builder
License requirements: None.
engageBuilder() - Method in interface nxopen.cam.TeachmodeEngageSettingsBuilder: Returns the engage parameters builder
License requirements: None.
engageClosedAreaBuilder() - Method in interface nxopen.cam.NcmPlanarBuilder: Returns the default engage closed area builder
License requirements: None.
engageDistance() - Method in interface nxopen.cam.CenterlineDrillTurningBuilder: Returns the engage distance
License requirements: None.
engageFeedRate() - Method in interface nxopen.cam.HoleMakingBuilder: Returns the Engage Feed Rate
License requirements: None.
engageFirstPlungeBuilder() - Method in interface nxopen.cam.NcmTurnRoughBuilder: Returns the First Plunge Engage builder
License requirements: None.
engageInitialBuilder() - Method in interface nxopen.cam.NcmScBuilder: Returns the initial engage settings
License requirements: None.
engageInitialClosedBuilder() - Method in interface nxopen.cam.NcmPlanarBuilder: Returns the initial engage closed area builder
License requirements: None.
engageInitialOpenBuilder() - Method in interface nxopen.cam.NcmPlanarBuilder: Returns the initial engage open area builder
License requirements: None.
engageLevelBlankBuilder() - Method in interface nxopen.cam.NcmTurnRoughBuilder: Returns the Level Blank Engage builder
License requirements: None.
engageLevelPartBuilder() - Method in interface nxopen.cam.NcmTurnRoughBuilder: Returns the Level Part Engage builder
License requirements: None.
engageLevelSafeBuilder() - Method in interface nxopen.cam.NcmTurnRoughBuilder: Returns the Level Safe Engage builder
License requirements: None.
engagementObject() - Method in interface nxopen.routing.IAxisPort: Returns the engagement object of a port, i.e. an expression representing the distance behind the port that another fitting or stock may engage
License requirements: routing_base ("Routing Basic")

Created in NX4.0.0
engageOpenAreaBuilder() - Method in interface nxopen.cam.NcmPlanarBuilder: Returns the default engage open area builder
License requirements: None.
engageOpenAreaBuilder() - Method in interface nxopen.cam.NcmScBuilder: Returns the open area engage settings
License requirements: None.
engagePlungeBuilder() - Method in interface nxopen.cam.NcmTurnRoughBuilder: Returns the Plunge Engage builder
License requirements: None.
engageProfileBuilder() - Method in interface nxopen.cam.NcmTurnRoughFinishBuilder: Returns the Profiling Engage builder
License requirements: None.
engageRetractType() - Method in interface nxopen.cam.NcmEngRetBuilder: Returns the type of engage/retract
License requirements: None.
engageRetractType() - Method in interface nxopen.cam.TurnEngageRetractBuilder: Returns the Engage(Retract) Type
License requirements: None.
engageRetractType() - Method in interface nxopen.cam.TurnThreadEngageRetractBuilder: Returns the the Engage(Retract) Type
License requirements: None.
engageSpindleSpeedBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder: Returns the engage spindle speed builder (inheritable Double)
License requirements: cam_base ("CAM BASE")
.
engageSpindleSpeedToggleBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder: Returns the engage spindle speed toggle builder (inheritable Int)
License requirements: cam_base ("CAM BASE")
.
engageType() - Method in interface nxopen.cam.NcmLaserEngage: Returns the Engage Type
License requirements: None.
ENGINE_PARAMS - Static variable in class nxopen.sim.SimDebugBuilder.DumpType: Dump Engine Params
ENGINEERING_FEET_INCHES - Static variable in class nxopen.annotations.DimensionUnit: Specified engineering units - converts inches to feet for measurements larger than 72 inches
ENGINEERING_FEET_INCHES - Static variable in class nxopen.uf.UFDrf.LinearUnits
ENGINEERING_OBJECTS - Static variable in class nxopen.ame.OrderAspectsBuilder.OrderType
ENGINEERING_OBJECTS_WITH_NO_PRODUCT - Static variable in class nxopen.ame.OrderAspectsBuilder.OrderType
ENGINEERING_STRESS_ENGINEERING_PLASTIC_STRAIN - Static variable in class nxopen.MaterialUtilities.StressStrainData: Engineering stress-Engineering plastic strain
ENGINEERING_STRESS_ENGINEERING_STRAIN - Static variable in class nxopen.MaterialUtilities.StressStrainData: Engineering stress-Engineering strain
EngineeringFunction - Interface in nxopen: Contains Engineering Function methods
To obtain an instance of this class, refer to Session

Created in NX4.0.0
engineeringFunction() - Method in interface nxopen.Session: Returns the EngineeringFunction instance belonging to this session
Created in NX3.0.0
EngineeringObjectAspectDetailBuilder - Interface in nxopen.ame: JA class for the Engineering Object Aspect Detail UI block .
EngineeringObjectAspectDetailBuilder.Columns - Class in nxopen.ame: Aspect Detail columns
EngineeringObjectAspectDetailBuilder.NameSource - Class in nxopen.ame: Aspect name from
EngineeringObjectBaseBuilder - Interface in nxopen.ame: JA class for the insert Eng object dialog
This is an abstract class, and cannot be instantiated.
EngineeringObjectBuilder - Interface in nxopen.ame: JA class for the insert Eng object dialog
To create a new instance of this class, use AMEManager.createEngineeringObjectBuilder(nxopen.Part)

Created in NX11.0.0
EngineeringObjectDefinitionLabelBuilder - Interface in nxopen.ame: JA class for the insert Engineering object definition label dialog
To create a new instance of this class, use AMEManager.createEngineeringObjectDefinitionLabelBuilder(nxopen.Part)

Created in NX11.0.0
EngineeringObjectNameBuilder - Interface in nxopen.ame: JA class for the Engineering Object and Engineering Object def name and description superclass UI block .
ENGLISH - Static variable in class nxopen.CGMBuilder.UnitsOption: English units
ENGLISH - Static variable in class nxopen.drawings.DrawingSheetBuilder.SheetUnits: an English units drawing sheet
ENGLISH - Static variable in class nxopen.DxfdwgImporter.UnitsEnum: units inches
ENGLISH - Static variable in class nxopen.PlotBuilder.UnitsOption: English
ENGLISH - Static variable in class nxopen.PrintPDFBuilder.UnitsOption: English
ENGLISH - Static variable in class nxopen.uf.UFConstants
ENGLISH_BASE - Static variable in class nxopen.cae.XyFunctionUnitSystem: the English Base unit
ENGLISH_CAE_BASE - Static variable in class nxopen.cae.XyFunctionUnitSystem: the English CAE Base
ENGLISH_SIZE - Static variable in class nxopen.uf.UFDraw.SizeState
englishScale() - Method in interface nxopen.features.shipdesign.ExpansionDrawingBuilder: Returns the English drawing scale
License requirements: None.
englishSheetTemplateLocation() - Method in interface nxopen.drawings.DrawingSheetBuilder: Returns the location of the english drawing sheet template to be added to the part file
License requirements: None.
engObjDescription() - Method in interface nxopen.ame.EditEngineeringObjectBuilder: Returns the string description
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
engObjectName() - Method in interface nxopen.ame.NamingRuleSettingsBuilder: Returns the engineering object name builder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
engObjectType() - Method in interface nxopen.ame.PortBuilder: Returns the engineering object type
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
engObjName() - Method in interface nxopen.ame.EditEngineeringObjectBuilder: Returns the string name
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
Engraving - Interface in nxopen.cam: Represents a Engraving Operation
To create or edit an instance of this class, use EngravingBuilder

Created in NX7.5.0
engravingAmplitude() - Method in interface nxopen.display.DecalBuilder: Returns the decal engraving amplitude
License requirements: None.
EngravingBuilder - Interface in nxopen.cam: Represents a Engraving Builder
To create a new instance of this class, use OperationCollection.createEngravingBuilder(nxopen.cam.CAMObject)

Created in NX5.0.0
engravingSoftness() - Method in interface nxopen.display.DecalBuilder: Returns the engraving softness
License requirements: None.
engRetMaxToolAxisChange() - Method in interface nxopen.cam.NcmSmoothingBuilder: Returns the engage/retract max tool axis change
License requirements: None.
engRetTolerance() - Method in interface nxopen.cam.NcmSmoothingBuilder: Returns the engage/retract tolerance value
License requirements: None.
engRetToleranceSource() - Method in interface nxopen.cam.NcmSmoothingBuilder: Returns the engage/retract tolerance source
License requirements: None.
engRetType() - Method in interface nxopen.cam.NcmHoleMachiningEngRet: Returns the type of engage/retract
License requirements: None.
engRetType() - Method in interface nxopen.cam.NcmPlanarEngRetBuilder: Returns the type of engage/retract
License requirements: None.
engRetType() - Method in interface nxopen.cam.NcmScEngRetBuilder: Returns the type of engage/retract
License requirements: None.
Enlarge - Interface in nxopen.features: Represents an enlarge feature
To create or edit an instance of this class, use EnlargeBuilder

Created in NX6.0.0
EnlargeBuilder - Interface in nxopen.features: Represents a Enlarge builder.
EnlargeBuilder.ExtensionTypes - Class in nxopen.features: Extension types
ENLARGED_SURFACE - Static variable in class nxopen.tooling.MWDesignPartingSurfaceBuilder.PartingSurfaceType: Enlarge
enlargeOtherFaceOption() - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder: Returns the option for enlarging the other face that connects to the same edge.
EnlargeSurfaceBuilder - Interface in nxopen.tooling: Mold Wizard enlarge surface management builder, trims a enlarged surface to a boundary of edges, curves, datum planes or faces.
EnlargeSurfaceBuilder.ColorValueData - Class in nxopen.tooling: This class holds the data returned from EnlargeSurfaceBuilder.getColorValue()
EnlargeSurfaceBuilder.KeepDiscardOption - Class in nxopen.tooling: represents the keep discard options for selected region.
EnlargeSurfaceCollection - Interface in nxopen.tooling: Represents a collection of Enlarge Surface
To obtain an instance of this class, refer to ToolingManager

Created in NX7.0.0
enlargeSurfaces() - Method in interface nxopen.tooling.ToolingManager: Returns the EnlargeSurfaceCollection instance belonging to this part .
ensureChildLoaded(Tag) - Method in interface nxopen.uf.UFAssem: Refer to UF_ASSEM_ensure_child_loaded for documentation.
ensureDefDirectory(String) - Method in interface nxopen.uf.UFClone: Refer to UF_CLONE_ensure_def_directory for documentation.
ensureLogicalModelIsLoaded(Component) - Method in interface nxopen.mechanicalrouting.LogicalDesignService: Ensures that the logical model is loaded for all the Runs included in the given Component that represents a container for the Routing design, such as a subset in a workset
License requirements: routing_base ("Routing Basic")

Created in NX11.0.0
enter() - Method in interface nxopen.ame.ApplicationBuilder: Enter the Automation Designer application.
enter() - Method in interface nxopen.geometricutilities.ReplAsstBuilder: Entry and re-entry to the Replacement Assistant mapping environment.
enter() - Method in interface nxopen.linedesigner.LineDesignerApplicationBuilder: To enter lineDesigner application
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
enter() - Method in interface nxopen.PolygonModelingTaskEnvironment: Starts Polygon Modeling task environment.
enter() - Method in interface nxopen.SubdivisionTaskEnvironment: Starts subdivision task environment.
enter() - Method in interface nxopen.tooldesigner.ToolDesignerApplicationBuilder: Enter the ToolDesigner application
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
ENTER - Static variable in class nxopen.uistyler.FileOperationData.FileOperationState: Enter file state
ENTER_STATEMENT - Static variable in class nxopen.cam.InspectionCmmCommandBuilder.CommandTypes: Enter any CMM statement
enterCustomApp() - Method in interface nxopen.uf.UFRoute: Refer to UF_ROUTE_enter_custom_app for documentation.
enterDraftingApplication() - Method in interface nxopen.DraftingManager: Enter the drafting application
License requirements: None.
enterEclassEnv() - Method in interface nxopen.ame.AMEManager: Entering an eClass environment
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
ENTERED - Static variable in class nxopen.weld.EdgePrepValuesBuilder.Option: Use the values entered as edge prep values.
ENTERED_ANGLE_LINE_TYPE - Static variable in class nxopen.uf.UFDrf.ObjectAssocLineType
enteredAngle - Variable in class nxopen.uf.UFDrf.ObjectAssocData
enterLibraryAuthoring() - Method in interface nxopen.pid.PidManager: Enter Library Authoring Tool.
enterMenuApplication() - Method in interface nxopen.menubar.MenuBarManager.EnterMenuApplication: Prototype for callback called whenever the application is entered
License requirements: None.
ENTERPRISE_ID - Static variable in class nxopen.annotations.PmiPreferences.PreferenceSymbolTypes: enterprise id
ENTERPRISE_IDENTIFIER - Static variable in class nxopen.annotations.PmiFilterByType.Type: Indicates a PMI enterprise identifier type
ENTERPRISE_IDENTIFIER_TYPE - Static variable in class nxopen.uf.UFPd.AttributeType
EnterpriseIdentification - Interface in nxopen.annotations: Represents a Enterprise Identification
To create or edit an instance of this class, use EnterpriseIdentificationBuilder

Created in NX6.0.0
EnterpriseIdentificationBuilder - Interface in nxopen.annotations: Represents a EnterpriseIdentification builder
To create a new instance of this class, use PmiAttributeCollection.createEnterpriseIdentificationBuilder(nxopen.annotations.EnterpriseIdentification)

Created in NX6.0.0
ENTHALPY - Static variable in class nxopen.cae.Result.Quantity
ENTHALPY_RATE - Static variable in class nxopen.cae.Result.Quantity
ENTIRE - Static variable in class nxopen.features.SectionSurfaceBuilder.ControlRegionEnum: Deprecated.

depth and skew applied to the entire section surface
ENTIRE - Static variable in class nxopen.features.SectionSurfaceBuilderEx.ControlRegionType: depth and skew applied to the entire section surface
ENTIRE - Static variable in class nxopen.PartCollection.RefsetOption: Use the "Entire Part" reference set for the new work component, and restore the reference set of the previous work component
ENTIRE_EDGE - Static variable in class nxopen.weld.WeldPrepareEdges: Output edges will be prepared for entire edge length
ENTIRE_FACE - Static variable in class nxopen.routing.FittingOverstockBuilder.Types: Entire Face
ENTIRE_LENGTH - Static variable in class nxopen.weld.WeldGrooveBuilder.Prepare: Entire Length
ENTIRE_MODEL - Static variable in class nxopen.cae.DisplayNodalCsysBuilder.NodesToDisplayType
ENTIRE_MODEL - Static variable in class nxopen.cae.modelcheck.ElementEdgeCheckBuilder.Scope: Takes all elements in the model into account while computing
ENTIRE_MODEL - Static variable in class nxopen.cae.ResultProbeBuilder.SelectionType
ENTIRE_PART - Static variable in class nxopen.assemblies.DesignElementBuilder.ReferenceSetType: Entire part
ENTIRE_PART - Static variable in class nxopen.assemblies.ReplaceComponentBuilder.ComponentReferenceSet: Set the reference set to Entire Part
ENTIRE_PART - Static variable in class nxopen.ObjectSelector.Scope: Export entire part
ENTIRE_PART - Static variable in class nxopen.routing.FittingOverstockBuilder.Types: Entire Part
ENTIRE_PART - Static variable in class nxopen.tooling.StandardPartBuilder.RefsetName
ENTIRE_PART_ONLY - Static variable in class nxopen.assemblies.CreateNewComponentBuilder.ComponentReferenceSetType: Set the reference set to entire part only
ENTIRE_SEGMENTS - Static variable in class nxopen.routing.CreationMethod
ENTIRE_SEGMENTS - Static variable in class nxopen.routing.Method: Cover all given segments
ENTIRE_SEGMENTS - Static variable in class nxopen.routing.OverstockBuilder.ApplicationType: Entire Segments
ENTIRE_UNFORM - Static variable in class nxopen.bodydes.OnestepUnformBuilder.Process: entire
ENTIRE_VIEWS - Static variable in class nxopen.drawings.ViewCopyTo3dBuilder.BoundingBoxOption: entire views
entireComponentPattern() - Method in interface nxopen.tooling.PocketBuilder: Returns the option for selecting entire component pattern.
entireDepthSkew() - Method in interface nxopen.features.SectionSurfaceBuilderEx: Returns the entire depth skew.
entirePartRefsetName() - Method in interface nxopen.assemblies.Component: Returns the name of the reference set which represents the entire part.
entireRegionDepthSkew() - Method in interface nxopen.features.SectionSurfaceBuilder: Deprecated.
Deprecated in NX9.0.0. Use SectionSurfaceBuilderEx instead.
entities - Variable in class nxopen.geometricutilities.RegionTracker.VertexSelectorsData: Edges associated with the vertex
entities - Variable in class nxopen.uf.UFFbmGeom.AskFeatureEntitiesData
entities - Variable in class nxopen.uf.UFModl.RoughOffset
ENTITY - Static variable in class nxopen.cae.PostAnnotation.ValueType
ENTITY - Static variable in class nxopen.cae.PostAnnotationBuilder.Type
Entity() - Constructor for class nxopen.cae.QueryCurvePost.Entity
Entity(QueryCurvePost.EntityType, int, Point3d) - Constructor for class nxopen.cae.QueryCurvePost.Entity: Constructor for the Entity object.
entity() - Method in interface nxopen.geometricutilities.EntityUsageInfo: Returns the important entity.
entity() - Method in interface nxopen.geometricutilities.MovePoleBuilder: Returns the entity
License requirements: None.
entity - Variable in class nxopen.tooling.AddReusableFeatureCollection.InputData: Placement entity in create mode
entity - Variable in class nxopen.weld.LogInfo: weld object
ENTITY_SELECTION_PLANES - Static variable in class nxopen.DisplayManager.ShowHideType: Show or hide entity selection planes
entityInfo - Variable in class nxopen.uf.UFModl.CompareEntityInfo
entityList - Variable in class nxopen.uf.UFDisp.J3dGeometryData
entityName - Variable in class nxopen.uf.UFMotion.PointOnSurfaceData
entityNames() - Method in interface nxopen.Step203Creator: Deprecated.
Deprecated in NX11.0.0. Use StepCreator instead.
entityNames() - Method in interface nxopen.Step214Creator: Deprecated.
Deprecated in NX11.0.0. Use StepCreator instead.
entityNames() - Method in interface nxopen.StepCreator: Returns the entity names types long or short
License requirements: None.
entityOption() - Method in interface nxopen.cae.NodeElementInfoBuilder: Returns the entity option
License requirements: None.
entityOption() - Method in interface nxopen.cae.ThicknessBuilder: Returns the entity option
License requirements: None.
entityParms - Variable in class nxopen.uf.UFCurve.IntersectInfo
EntitySelectionPlane - Interface in nxopen.display: Represents a grid on a datum plane
Entity selection planes are not supported in KF.
entityTag - Variable in class nxopen.uf.UFCutLevels.Single
entityTag - Variable in class nxopen.uf.UFModl.CompareEntityMatch
entityType() - Method in interface nxopen.blockstyler.BodyCollector: Returns the EntityType
License requirements: None.
entityType() - Method in interface nxopen.blockstyler.CurveCollector: Returns the EntityType
License requirements: None.
entityType() - Method in interface nxopen.blockstyler.FaceCollector: Returns the EntityType
License requirements: None.
entityType() - Method in interface nxopen.blockstyler.SectionBuilder: Returns the EntityType
License requirements: None.
entityType() - Method in interface nxopen.blockstyler.SuperPoint: Returns the EntityType
License requirements: None.
entityType() - Method in interface nxopen.blockstyler.SuperSection: Returns the EntityType
License requirements: None.
entityType() - Method in interface nxopen.geometricutilities.GeometryLocationData: Returns the type
License requirements: None.
EntityUsageInfo - Interface in nxopen.geometricutilities: Represents a EntityUsageInfo .
EntityUsageInfo.DependentFeaturesData - Class in nxopen.geometricutilities: This class holds the data returned from EntityUsageInfo.getDependentFeatures(nxopen.geometricutilities.EntityUsageInfo.Status)
EntityUsageInfo.OtherDependentsData - Class in nxopen.geometricutilities: This class holds the data returned from EntityUsageInfo.getOtherDependents(nxopen.geometricutilities.EntityUsageInfo.Status)
EntityUsageInfo.Status - Class in nxopen.geometricutilities: enum for usage status
EntityUsageInfoList - Interface in nxopen.geometricutilities: Represents a list of objects.
entranceDiameter() - Method in interface nxopen.cam.CenterlineDrillTurningBuilder: Returns the entrance diameter
License requirements: None.
entranceDiameter() - Method in interface nxopen.cam.Cycle: Returns the entrance diameter
License requirements: None.
entries() - Method in interface nxopen.cae.SimLoadRecipeMapping: Returns the SimLoadRecipeMapEntryCollection .
entries - Variable in class nxopen.pdm.FindCriteria.CriteriaData: Search criteria entries
ENTRY - Static variable in class nxopen.cam.InspectionPathBuilder.EntryExitType: Entry Point
entry - Variable in class nxopen.uf.UFRoute.AskAppViewExtPlibData
entry - Variable in class nxopen.uf.UFRoute.AskAppViewFabCharxData
entryAvoidance() - Method in interface nxopen.cam.InspectionMethodBuilder: Returns a flag to indicate if collision avoidance is required at entry
License requirements: None.
entryEndOffset() - Method in interface nxopen.cam.MachiningRegionBuilder: Returns the entry end offset
License requirements: None.
entryExitDistance() - Method in interface nxopen.cam.InspectionMethodBuilder: Returns the distance from the entry or exit point to safe plane
License requirements: None.
entryMethodOption() - Method in interface nxopen.cae.responsesimulation.InitialConditions: Returns the entry method of user customization
License requirements: nx_response_anlys ("NX Response Analysis")
.
entryPoint() - Method in interface nxopen.cam.InspectionMethodBuilder: Returns a flag to indicate if an entry point is required
License requirements: None.
entryStartOffset() - Method in interface nxopen.cam.MachiningRegionBuilder: Returns the entry start offset
License requirements: None.
entryTransition() - Method in interface nxopen.cam.InspectionMethodBuilder: Returns the type of entry transition
License requirements: None.
entryType() - Method in interface nxopen.menubar.ContextMenuEntry: Returns the type of this menu entry.
ENUM - Static variable in class nxopen.blockstyler.PropertyList.PropertyType: Enum
Enum - Class in nxopen: Base class for all NX Open enums.
ENUM - Static variable in class nxopen.PropertyContainer.PropertyType: Enum
enumAttributeName() - Method in interface nxopen.tooling.AssemblyDrawingBuilder: Returns the option for select the attribute name
License requirements: None.
enumAttributeValue() - Method in interface nxopen.tooling.AssemblyDrawingBuilder: Returns the option for select the attribute value
License requirements: None.
enumCompList() - Method in interface nxopen.tooling.BomBuilder: Returns the tree list shows which kind of components should be included in
License requirements: None.
enumCylinderType() - Method in interface nxopen.tooling.BomBuilder: Returns the cylinder type may be used to generate a cylinder for the stock size
License requirements: None.
enumDataLength() - Method in interface nxopen.ame.PlcVendorSymbolBuilder: Returns the EnumDataLength
License requirements: None.
enumDrawingType() - Method in interface nxopen.tooling.AssemblyDrawingBuilder: Returns the option for the assembly drawing operation
License requirements: None.
Enumeration - Interface in nxopen.blockstyler: Represents an Enumeration block .
ENUMERATION - Static variable in class nxopen.report.BaseArgument.Type: Argument for enumeration data
EnumerationArgument - Interface in nxopen.report: Represents an argument for enumeration type data.
enumFilter() - Method in interface nxopen.ame.LineDesignerMappingBuilder: Returns the enum filter
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
enumMethod() - Method in interface nxopen.weld.FilletBuilder: Returns the enum method for skip welds.
enumParameterExtent() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder: Returns the enum parameter extent
License requirements: None.
enumParamPriMatModifier() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder: Returns the enum parameter primary material modifier
License requirements: None.
enumParamPriMatModifier1() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder: Returns the enum parameter primary material modifier1
License requirements: None.
enumParamSecMatModifier() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder: Returns the enum parameter secondary material modifier
License requirements: None.
enumParamSecMatModifier1() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder: Returns the enum parameter secondary material modifier1
License requirements: None.
enumParamSubType() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder: Returns the enum parameter sub type
License requirements: None.
enumParamTerMatModifier() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder: Returns the enum parameter tertiary material modifier
License requirements: None.
enumParamTerMatModifier1() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder: Returns the enum parameter tertiary material modifier1
License requirements: None.
enumParamTolMatModifier() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder: Returns the enum parameter tolerance material modifier
License requirements: None.
enumParamTolMatModifier1() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder: Returns the enum parameter tolerance material modifier1
License requirements: None.
enumParamTolMatModifierDup() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder: Returns the enum parameter tolerance material modifier dup
License requirements: None.
enumParamTolZoneShape() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder: Returns the enum parameter tolerance zone shape
License requirements: None.
enumParamTolZoneShape1() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder: Returns the enum parameter tolerance zone shape1
License requirements: None.
enumParamXYZAxis() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder: Returns the enum parameter xyzaxis
License requirements: None.
enumPCSABS() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder: Returns the enum pcsabs
License requirements: None.
enumPostCrossStyle() - Method in interface nxopen.linedesigner.RailingFeatureBuilder: Returns the post cross style enum
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
enumRailCrossStyle() - Method in interface nxopen.linedesigner.RailingFeatureBuilder: Returns the railing cross style enum
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
enumRevisionRule() - Method in interface nxopen.ame.LoadLineDesignerBuilder: Returns the revision rule
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
enumSheets() - Method in interface nxopen.tooling.AssemblyDrawingBuilder: Returns the option for select the sheet
License requirements: None.
enumSpacing() - Method in interface nxopen.features.shipdesign.VentilationHoles2Builder: Returns the enum spacing
License requirements: None.
enumSpacingType() - Method in interface nxopen.linedesigner.RailingFeatureBuilder: Returns an API to get spacing type enum
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
enumStockStyle() - Method in interface nxopen.routing.StockStyleBuilder: Returns the enum for setting stock style
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
enumStockType() - Method in interface nxopen.tooling.BomBuilder: Returns the stock shape will be generated, it can be a box or cylinder
License requirements: None.
enumTorusCharacteristic() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder: Returns the enum torus characteristic
License requirements: None.
enumType() - Method in interface nxopen.formboard.ObjectAttributeReferenceBuilder: Returns the enum type
License requirements: routing_harness ("Routing Harness")
.
enumTypeOutput() - Method in interface nxopen.cam.InspectionOutputOperationBuilder: Returns the enum type output
License requirements: None.
enumValue() - Method in interface nxopen.display.IrayPlusMaterialAttributeEnum: Returns the enum value
License requirements: None.
ENVELOPE10 - Static variable in class nxopen.PrintBuilder.PaperSize: #10 Envelope, 4 1/8- by 9 1/2-inches
ENVELOPE11 - Static variable in class nxopen.PrintBuilder.PaperSize: #11 Envelope, 4 1/2- by 10 3/8-inches
ENVELOPE12 - Static variable in class nxopen.PrintBuilder.PaperSize: #12 Envelope, 4 3/4- by 11-inches
ENVELOPE14 - Static variable in class nxopen.PrintBuilder.PaperSize: #14 Envelope, 5- by 11 1/2-inches
ENVELOPE9 - Static variable in class nxopen.PrintBuilder.PaperSize: #9 Envelope, 3 7/8- by 8 7/8-inches
ENVELOPE_ACROSS_CIRCUMFERENCE - Static variable in class nxopen.cae.AxiSymmetricParameters.Options
ENVELOPE_ACROSS_SECTORS - Static variable in class nxopen.cae.CyclicSymmetricParameters.OriginalResult
ENVELOPE_B4 - Static variable in class nxopen.PrintBuilder.PaperSize: B4 Envelope, 250- by 353-millimeters
ENVELOPE_B5 - Static variable in class nxopen.PrintBuilder.PaperSize: B5 Envelope, 176- by 250-millimeters
ENVELOPE_B6 - Static variable in class nxopen.PrintBuilder.PaperSize: B6 Envelope, 176- by 125-millimeters
ENVELOPE_C3 - Static variable in class nxopen.PrintBuilder.PaperSize: C3 Envelope, 324- by 458-millimeters
ENVELOPE_C4 - Static variable in class nxopen.PrintBuilder.PaperSize: C4 Envelope, 229- by 324-millimeters
ENVELOPE_C5 - Static variable in class nxopen.PrintBuilder.PaperSize: C5 Envelope, 162- by 229-millimeters
ENVELOPE_C6 - Static variable in class nxopen.PrintBuilder.PaperSize: C6 Envelope, 114- by 162-millimeters
ENVELOPE_C65 - Static variable in class nxopen.PrintBuilder.PaperSize: C65 Envelope, 114- by 229-millimeters
ENVELOPE_DL - Static variable in class nxopen.PrintBuilder.PaperSize: DL Envelope, 110- by 220-millimeters
ENVELOPE_INVITE - Static variable in class nxopen.PrintBuilder.PaperSize: Envelope Invite 220 x 220 mm
ENVELOPE_ITALY - Static variable in class nxopen.PrintBuilder.PaperSize: Italy Envelope, 110- by 230-millimeters
ENVELOPE_MONARCH - Static variable in class nxopen.PrintBuilder.PaperSize: Monarch Envelope, 3 7/8- by 7 1/2-inches
ENVELOPE_PERSONAL - Static variable in class nxopen.PrintBuilder.PaperSize: 6 3/4 Envelope, 3 5/8- by 6 1/2-inches
envelopeConcavity() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder: Returns the concavity factor that is used in constructing the motion envelope.
envelopeOffset() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder: Returns the option to specify which offset method is used in the envelope creation.
EnvelopeTolerance() - Constructor for class nxopen.motion.PostProcess.EnvelopeTolerance
EnvelopeTolerance(PostProcess.EnvelopeAccuracyModes, PostProcess.EnvelopeToleranceTypes, double, boolean, double, double) - Constructor for class nxopen.motion.PostProcess.EnvelopeTolerance: Constructor for the EnvelopeTolerance object.
envelopeVal() - Method in interface nxopen.cae.AxiSymmetricParameters: Returns the envelope value enum
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
ENVIRONMENT_SHADOW_CATCHER_ONLY - Static variable in class nxopen.display.Shadows.RealTimeState: Realtime Environment or shadow catcher only
EnvironmentBuilder - Interface in nxopen.display: Represents a EnvironmentBuilder This controls environment image, tone mapping, and stages.
environmentBuilder() - Method in interface nxopen.display.Scene: Returns the environment_builder - use to define the environment
License requirements: None.
EnvironmentBuilder.GroundPlaneTypes - Class in nxopen.display: Represents an index to a ground plane type define
EnvironmentBuilder.ImageBlurType - Class in nxopen.display: lighting image blurr type
EnvironmentBuilder.ImageUpVectorTypes - Class in nxopen.display: up vector type
EnvironmentBuilder.ToneMappingTypes - Class in nxopen.display: tone mapping type - do not enable until NX11
environmentMapEnum() - Method in interface nxopen.display.TrueShadingBuilder: Returns the reflection environment map enum type
License requirements: None.
environmentMapFileBrowser() - Method in interface nxopen.display.TrueShadingBuilder: Returns the reflection environment map filename
License requirements: None.
environments() - Method in interface nxopen.motion.MotionSession: Returns the MotionEnvironment belonging to this part
Created in NX7.5.0
envValue() - Method in interface nxopen.cae.CyclicSymmetricParameters: Returns the sector envelope value enum
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
envVarName() - Method in interface nxopen.cam.UserDefinedOprBuilder: Returns the name
License requirements: None.
EOAttributeHolder - Interface in nxopen.ame: EOAttributeHolder Atributes Holder Object
This does not need a creator.
eoattributeHolder() - Method in interface nxopen.ame.ProjectEngineeringObjectBuilder: Returns the container for definition holders
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
eoAttributesInformation() - Method in interface nxopen.ame.AmeDebugSession: Prints EO Attributes information
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
EODataItemAttributeHolder - Interface in nxopen.ame: EODef Atributes Holder Object
This does not need a creator.
eoDataItemAttributeHolder() - Method in interface nxopen.ame.FunctionCallInstanceBuilder: Returns the data item
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
eoDataItemAttributeHolder() - Method in interface nxopen.ame.InstanceDataBlockBuilder: Returns the data item
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
eoDefAttributeHolder() - Method in interface nxopen.ame.BulkEngineeringObjectBuilder: Returns the def
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
EODefAttributeHolder - Interface in nxopen.ame: EODef Atributes Holder Object
This does not need a creator.
eoDefAttributeHolder() - Method in interface nxopen.ame.ProjectEngineeringObjectBuilder: Returns the EO definition attribute holder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
eoname() - Method in interface nxopen.ame.BulkEngineeringObjectBuilder: Returns the eo name and description ui block
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
eoName() - Method in interface nxopen.ame.NamingRuleBuilder: Returns the engineering object name
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
eoNameIndex() - Method in interface nxopen.ame.ProjectEngineeringObjectBuilder: Returns the eo name index and description ui block
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
EPLAN - Static variable in class nxopen.mechatronics.ECADExportBuilder.ExportFileType: Deprecated.

EPLAN File
EplanImportProjectTemplateBuilder - Interface in nxopen.ame: EplanImportProjectTemplateBuilder
To create a new instance of this class, use AMEManager.createEplanImportProjectTemplateBuilder(nxopen.Part)

Created in NX12.0.0
eplanMacrosInformation() - Method in interface nxopen.ame.AmeDebugSession: Prints EPLAN Macros information
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
EPLANPlug - Interface in nxopen.ame: Represents EPLANPlug
Use the static method in this class to obtain an instance.
EplanProjectGenerationBuilder - Interface in nxopen.ame: the eplan project generation dialog builder
To create a new instance of this class, use AMEManager.createEplanProjectGenerationBuilder(nxopen.Part)
Default values.
EPLANProjectSettings - Interface in nxopen.ame: Eplan project settings Node Journaling class
To create or edit an instance of this class, use EplanSettingsBuilder

Created in NX11.0.0
EplanProjectTemplateAndStructureBuilder - Interface in nxopen.ame: JA class for the Eplan project template dialog
To create a new instance of this class, use AMEManager.createEplanProjectTemplateAndStructureBuilder(nxopen.Part)

Created in NX12.0.0
EplanSettingsBuilder - Interface in nxopen.ame: EplanSettingsBuilder
To create a new instance of this class, use AMEManager.createEplanSettingsBuilder(nxopen.Part, nxopen.ame.AMEBaseNode)

Created in NX11.0.0
EPLANSocket - Interface in nxopen.ame: Represents EPLANSocket
Use the static method in this class to obtain an instance.
EplanStructureIdentifierOrderBuilder - Interface in nxopen.ame: Represents a Eplan Structure identifier order Builder
To create a new instance of this class, use AMEManager.createEplanStructureIdentifierOrderBuilder(nxopen.Part)

Created in NX12.0.0
EplanStructureSettings - Interface in nxopen.ame: Eplan structure settings Journaling class
Will be added once available
.
EQ - Static variable in class nxopen.cae.optimization.TBSConstraintBuilder.ConstraintOption: Value of equality constraint
EQ - Static variable in class nxopen.mechatronics.ExternalConnectionBuilder.ConditionType: Deprecated.

equal
EQ - Static variable in class nxopen.mechatronics.ExternalConnectionElementBuilder.ConditionType: equal
EQUAL - Static variable in class nxopen.annotations.SearchModelViewBuilder.ValueComparisionOptions
EQUAL - Static variable in class nxopen.validate.RequirementBuilder.RelationalOperatorOptions
EQUAL_ARC_LENGTH - Static variable in class nxopen.features.DivideCurveBuilder.EqualSegmentOption: Equal Arc length
EQUAL_ARC_LENGTH - Static variable in class nxopen.features.PointSetBuilder.CurvePointsType: Points will be created at equal arc length along curve.
EQUAL_ARC_LENGTH - Static variable in class nxopen.features.ProjectCurveBuilder.ProjectionOptionType: Represents Equal Arc Length
EQUAL_ARC_LENGTH - Static variable in class nxopen.features.SectionCurveBuilder.SpacingType: Equal arclength spacing
EQUAL_ARC_LENGTH - Static variable in class nxopen.fields.FieldProfileTable.SamplingPointOption: Equal arc length type
EQUAL_ARC_LENGTH - Static variable in class nxopen.routing.SegmentManager.SubdivideSpacing: Equal Arc Length
EQUAL_ARC_LENGTH - Static variable in class nxopen.routing.SubdivideSegmentBuilder.EqualSegmentsMethod: Equal Arc Length
EQUAL_BILATERAL - Static variable in class nxopen.annotations.BaseSurfaceFinishBuilder.ToleranceOption: Equal bilateral
EQUAL_BILATERAL - Static variable in class nxopen.annotations.SearchCriteriaSurfaceFinishBuilder.ToleranceTypeOptions: equal bilateral
EQUAL_BILATERAL_TOLERANCE - Static variable in class nxopen.annotations.SearchCriteriaDimensionBuilder.ToleranceTypes: qualBilateralTolerance
EQUAL_BILATERAL_TOLERANCE - Static variable in class nxopen.tooling.AutoDimensionBuilder.ToleranceType
EQUAL_LENGTH - Static variable in class nxopen.Sketch.ConstraintType
EQUAL_LENGTH - Static variable in class nxopen.SketchConstraintBuilder.Constraint
EQUAL_LENGTH - Static variable in class nxopen.uf.UFSket.ConType
EQUAL_OPERATOR - Static variable in class nxopen.visualreporting.Condition.OperatorOption
EQUAL_PARAMETER - Static variable in class nxopen.features.DivideCurveBuilder.EqualSegmentOption: Equal Parameter
EQUAL_PARAMETER - Static variable in class nxopen.routing.SegmentManager.SubdivideSpacing: Equal Parameter
EQUAL_PARAMETER - Static variable in class nxopen.routing.SubdivideSegmentBuilder.EqualSegmentsMethod: Equal Parameter
EQUAL_PARAMETER_SPACING - Static variable in class nxopen.features.SectionCurveBuilder.SpacingType: Equal parameter spacing
EQUAL_PARAMETERS - Static variable in class nxopen.features.PointSetBuilder.CurvePointsType: Points will be created at equal parameter spacing along curve.
EQUAL_RADIUS - Static variable in class nxopen.Sketch.ConstraintType
EQUAL_RADIUS - Static variable in class nxopen.SketchConstraintBuilder.Constraint
EQUAL_RADIUS - Static variable in class nxopen.uf.UFSket.ConType
EQUAL_SEGMENTS - Static variable in class nxopen.features.DivideCurveBuilder.Types: Equal Segments
EQUAL_SEGMENTS - Static variable in class nxopen.routing.SubdivideSegmentBuilder.Types: Equal Segments
EQUAL_SEGMENTS - Static variable in class nxopen.weld.WeldJointBuilder.SplitTypes: Specified number of equal segments.
EQUAL_SPACING - Static variable in class nxopen.features.shipdesign.TraceLinesBuilder.TraceLineType
EQUAL_TO - Static variable in class nxopen.motion.PackagingMeasureBuilder.MeasureCondition: Stop event defined by minimum measurement equal to threshold (target) value.
equalArcLengthMethod() - Method in interface nxopen.features.ProjectCurveBuilder: Returns the equal arc length method
License requirements: None.
equalArcLengthSegments() - Method in interface nxopen.features.DivideCurveBuilder: Returns the equal arc length segments
License requirements: None.
equalDiameterEnabled() - Method in interface nxopen.features.FaceRecognitionBuilder: Returns a value that indicates whether equal diameter recognition is enabled
License requirements: None.
equalDimensionCompareTolerance() - Method in interface nxopen.drafting.AutomationPreferencesBuilder: Returns the equal dimension compare tolerance
License requirements: None.
equalDimensionTolerance() - Method in interface nxopen.drafting.AutomationRuleBuilder: Returns the equal dimension comparison tolerance
License requirements: None.
equalLength() - Method in interface nxopen.InferredConstraintsBuilder: Returns the equal length infer-constraint setting.
equalLength() - Method in interface nxopen.SketchAutoConstrainBuilder: Returns the equal length
License requirements: None.
EQUALLY_SPACED - Static variable in class nxopen.features.shipdesign.SeamBuilder.DefinitionMethods: Create a specified number of seams equidistant between two selected curves.
equalParameterSegments() - Method in interface nxopen.features.DivideCurveBuilder: Returns the equal parameter segments
License requirements: None.
equalRadius() - Method in interface nxopen.InferredConstraintsBuilder: Returns the equal radius infer-constraint setting.
equalRadius() - Method in interface nxopen.SketchAutoConstrainBuilder: Returns the equal radius
License requirements: None.
equalRadius2dComponentEnabled() - Method in interface nxopen.features.CurveFinderBuilder: Returns a value that indicates whether add equal radius 2d component recognition for the last curves added to curve collector
License requirements: None.
equalRadiusEnabled() - Method in interface nxopen.features.CurveFinderBuilder: Returns a value that indicates whether add equal radius recognition for the last curves added to curve collector
License requirements: None.
equalRadiusSketchGroupEnabled() - Method in interface nxopen.features.CurveFinderBuilder: Returns a value that indicates whether add equal radius recognition for the last curves added to curve collector
License requirements: None.
EQUALS - Static variable in class nxopen.ame.BaseEvaluatorBuilder.ConditionType
EQUALS - Static variable in class nxopen.annotations.SearchModelViewBuilder.TextComparisionOptions: Equals
equals(Object) - Method in class nxopen.Enum: Returns true if the specified object equals this enum.
equals(Object) - Method in class nxopen.Tag: Tests whether the input object is equal to this Tag
equalSegmentMethod() - Method in interface nxopen.features.DivideCurveBuilder: Returns the equal segment method
License requirements: None.
equalSegmentsOption() - Method in interface nxopen.routing.SubdivideSegmentBuilder: Returns the equal segments option as SubdivideSegmentBuilder.EqualSegmentsMethod
License requirements: routing_base ("Routing Basic")

Created in NX6.0.0
equation() - Method in interface nxopen.Expression: Returns the equation of the expression in the form: name = right_hand_side.
equidistantStock() - Method in interface nxopen.cam.BoundaryTurnBlank: Returns the equidistant stock
License requirements: None.
EQUILATERAL - Static variable in class nxopen.geometricutilities.TriangularFrameBuilder.Subtypes: Equilateral triangle
EQUIPMENT - Static variable in class nxopen.mechanicalrouting.PartPlacementBuilder.PositionAsType: position as equipment
Equipment - Interface in nxopen.pid: Represents the equipment class.
equipment - Variable in class nxopen.pid.PipeBuilder.StartData
equipment - Variable in class nxopen.pid.PortEquipmentBuilder.NodeData
EQUIPMENT - Static variable in class nxopen.routing.RoutingBulkReplacementBuilderRetainReasonType: Retain reason is the object is equipment and is not supported
EquipmentBuilder - Interface in nxopen.pid: Builder used to model a piece of Equipment.
EquipmentBuilder.InlineSymbolLocationData - Class in nxopen.pid: This class holds the data returned from EquipmentBuilder.getInlineSymbolLocation()
EquipmentBuilder.NewInlineConnectionData - Class in nxopen.pid: This class holds the data returned from EquipmentBuilder.getNewInlineConnection()
EQUIVALENT_CREEP_STRAIN - Static variable in class nxopen.cae.Result.Quantity
EQUIVALENT_PLASTIC_STRAIN - Static variable in class nxopen.cae.Result.Quantity
EQUIVALENT_STRESS - Static variable in class nxopen.cae.Result.Quantity
equivalentSectionProperties(double[], double[], double[], double[]) - Method in interface nxopen.cae.aerostructures.author.ABB: Compute equivalent section properties (area, center of gravity, Young's modulus and inertia) of a profile composed of different sub-sections.
EquivalentSectionPropertiesData() - Constructor for class nxopen.cae.aerostructures.author.ABB.EquivalentSectionPropertiesData
equivalentStressMethod() - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder: Returns the equivalent stress method.
erase(int) - Method in interface nxopen.ame.NamingRuleBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.ame.NamingRuleBuilderList: Erases the object at the given position from the list.
erase(NamingRuleBuilder) - Method in interface nxopen.ame.NamingRuleBuilderList: Erases the object from the list, but does not delete the object.
erase(NamingRuleBuilder, ObjectList.DeleteOption) - Method in interface nxopen.ame.NamingRuleBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.ame.TypeMappingBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.ame.TypeMappingBuilderList: Erases the object at the given position from the list.
erase(TypeMappingBuilder) - Method in interface nxopen.ame.TypeMappingBuilderList: Erases the object from the list, but does not delete the object.
erase(TypeMappingBuilder, ObjectList.DeleteOption) - Method in interface nxopen.ame.TypeMappingBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.annotations.ArbitraryAreaSeedBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.annotations.ArbitraryAreaSeedBuilderList: Erases the object at the given position from the list.
erase(ArbitraryAreaSeedBuilder) - Method in interface nxopen.annotations.ArbitraryAreaSeedBuilderList: Erases the object from the list, but does not delete the object.
erase(ArbitraryAreaSeedBuilder, ObjectList.DeleteOption) - Method in interface nxopen.annotations.ArbitraryAreaSeedBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.annotations.DatumReferenceBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.annotations.DatumReferenceBuilderList: Erases the object at the given position from the list.
erase(DatumReferenceBuilder) - Method in interface nxopen.annotations.DatumReferenceBuilderList: Erases the object from the list, but does not delete the object.
erase(DatumReferenceBuilder, ObjectList.DeleteOption) - Method in interface nxopen.annotations.DatumReferenceBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.annotations.FeatureControlFrameDataBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.annotations.FeatureControlFrameDataBuilderList: Erases the object at the given position from the list.
erase(FeatureControlFrameDataBuilder) - Method in interface nxopen.annotations.FeatureControlFrameDataBuilderList: Erases the object from the list, but does not delete the object.
erase(FeatureControlFrameDataBuilder, ObjectList.DeleteOption) - Method in interface nxopen.annotations.FeatureControlFrameDataBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.annotations.FeatureControlFrameIndicatorBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.annotations.FeatureControlFrameIndicatorBuilderList: Erases the object at the given position from the list.
erase(FeatureControlFrameIndicatorBuilder) - Method in interface nxopen.annotations.FeatureControlFrameIndicatorBuilderList: Erases the object from the list, but does not delete the object.
erase(FeatureControlFrameIndicatorBuilder, ObjectList.DeleteOption) - Method in interface nxopen.annotations.FeatureControlFrameIndicatorBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.annotations.LeaderDataList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.annotations.LeaderDataList: Erases the object at the given position from the list.
erase(LeaderData) - Method in interface nxopen.annotations.LeaderDataList: Erases the object from the list, but does not delete the object.
erase(LeaderData, ObjectList.DeleteOption) - Method in interface nxopen.annotations.LeaderDataList: Erases the object from the list.
erase(int) - Method in interface nxopen.annotations.MasterSymbolListItemBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.annotations.MasterSymbolListItemBuilderList: Erases the object at the given position from the list.
erase(MasterSymbolListItemBuilder) - Method in interface nxopen.annotations.MasterSymbolListItemBuilderList: Erases the object from the list, but does not delete the object.
erase(MasterSymbolListItemBuilder, ObjectList.DeleteOption) - Method in interface nxopen.annotations.MasterSymbolListItemBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.annotations.SymbolCatalogParameterBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.annotations.SymbolCatalogParameterBuilderList: Erases the object at the given position from the list.
erase(SymbolCatalogParameterBuilder) - Method in interface nxopen.annotations.SymbolCatalogParameterBuilderList: Erases the object from the list, but does not delete the object.
erase(SymbolCatalogParameterBuilder, ObjectList.DeleteOption) - Method in interface nxopen.annotations.SymbolCatalogParameterBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.annotations.TitleBlockCellBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.annotations.TitleBlockCellBuilderList: Erases the object at the given position from the list.
erase(TitleBlockCellBuilder) - Method in interface nxopen.annotations.TitleBlockCellBuilderList: Erases the object from the list, but does not delete the object.
erase(TitleBlockCellBuilder, ObjectList.DeleteOption) - Method in interface nxopen.annotations.TitleBlockCellBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.assemblies.PartitionList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.assemblies.PartitionList: Erases the object at the given position from the list.
erase(Partition) - Method in interface nxopen.assemblies.PartitionList: Erases the object from the list, but does not delete the object.
erase(Partition, ObjectList.DeleteOption) - Method in interface nxopen.assemblies.PartitionList: Erases the object from the list.
erase(int) - Method in interface nxopen.BodyList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.BodyList: Erases the object at the given position from the list.
erase(Body) - Method in interface nxopen.BodyList: Erases the object from the list, but does not delete the object.
erase(Body, ObjectList.DeleteOption) - Method in interface nxopen.BodyList: Erases the object from the list.
erase(int) - Method in interface nxopen.cae.DependentMeshListItemBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.cae.DependentMeshListItemBuilderList: Erases the object at the given position from the list.
erase(DependentMeshListItemBuilder) - Method in interface nxopen.cae.DependentMeshListItemBuilderList: Erases the object from the list, but does not delete the object.
erase(DependentMeshListItemBuilder, ObjectList.DeleteOption) - Method in interface nxopen.cae.DependentMeshListItemBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.cae.ManualSweepBetweenListItemSelectionList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.cae.ManualSweepBetweenListItemSelectionList: Erases the object at the given position from the list.
erase(ManualSweepBetweenListItemSelection) - Method in interface nxopen.cae.ManualSweepBetweenListItemSelectionList: Erases the object from the list, but does not delete the object.
erase(ManualSweepBetweenListItemSelection, ObjectList.DeleteOption) - Method in interface nxopen.cae.ManualSweepBetweenListItemSelectionList: Erases the object from the list.
erase(int) - Method in interface nxopen.cae.MeshManualSweepBetweenListItemSelectionList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.cae.MeshManualSweepBetweenListItemSelectionList: Erases the object at the given position from the list.
erase(MeshManualSweepBetweenListItemSelection) - Method in interface nxopen.cae.MeshManualSweepBetweenListItemSelectionList: Erases the object from the list, but does not delete the object.
erase(MeshManualSweepBetweenListItemSelection, ObjectList.DeleteOption) - Method in interface nxopen.cae.MeshManualSweepBetweenListItemSelectionList: Erases the object from the list.
erase(int) - Method in interface nxopen.cam.BoundaryMemberSetList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.cam.BoundaryMemberSetList: Erases the object at the given position from the list.
erase(BoundaryMemberSet) - Method in interface nxopen.cam.BoundaryMemberSetList: Erases the object from the list, but does not delete the object.
erase(BoundaryMemberSet, ObjectList.DeleteOption) - Method in interface nxopen.cam.BoundaryMemberSetList: Erases the object from the list.
erase(int) - Method in interface nxopen.cam.BoundarySetList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.cam.BoundarySetList: Erases the object at the given position from the list.
erase(BoundarySet) - Method in interface nxopen.cam.BoundarySetList: Erases the object from the list, but does not delete the object.
erase(BoundarySet, ObjectList.DeleteOption) - Method in interface nxopen.cam.BoundarySetList: Erases the object from the list.
erase(int) - Method in interface nxopen.cam.BoundaryTurnVariableStockSetList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.cam.BoundaryTurnVariableStockSetList: Erases the object at the given position from the list.
erase(BoundaryTurnVariableStockSet) - Method in interface nxopen.cam.BoundaryTurnVariableStockSetList: Erases the object from the list, but does not delete the object.
erase(BoundaryTurnVariableStockSet, ObjectList.DeleteOption) - Method in interface nxopen.cam.BoundaryTurnVariableStockSetList: Erases the object from the list.
erase(int) - Method in interface nxopen.cam.CAMFeatureList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.cam.CAMFeatureList: Erases the object at the given position from the list.
erase(CAMFeature) - Method in interface nxopen.cam.CAMFeatureList: Erases the object from the list, but does not delete the object.
erase(CAMFeature, ObjectList.DeleteOption) - Method in interface nxopen.cam.CAMFeatureList: Erases the object from the list.
erase(int) - Method in interface nxopen.cam.CollisionPairBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.cam.CollisionPairBuilderList: Erases the object at the given position from the list.
erase(CollisionPairBuilder) - Method in interface nxopen.cam.CollisionPairBuilderList: Erases the object from the list, but does not delete the object.
erase(CollisionPairBuilder, ObjectList.DeleteOption) - Method in interface nxopen.cam.CollisionPairBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.cam.CustomLoopSetList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.cam.CustomLoopSetList: Erases the object at the given position from the list.
erase(CustomLoopSet) - Method in interface nxopen.cam.CustomLoopSetList: Erases the object from the list, but does not delete the object.
erase(CustomLoopSet, ObjectList.DeleteOption) - Method in interface nxopen.cam.CustomLoopSetList: Erases the object from the list.
erase(int) - Method in interface nxopen.cam.CutVolumeList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.cam.CutVolumeList: Erases the object at the given position from the list.
erase(CutVolume) - Method in interface nxopen.cam.CutVolumeList: Erases the object from the list, but does not delete the object.
erase(CutVolume, ObjectList.DeleteOption) - Method in interface nxopen.cam.CutVolumeList: Erases the object from the list.
erase(int) - Method in interface nxopen.cam.DriveChainItemBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.cam.DriveChainItemBuilderList: Erases the object at the given position from the list.
erase(DriveChainItemBuilder) - Method in interface nxopen.cam.DriveChainItemBuilderList: Erases the object from the list, but does not delete the object.
erase(DriveChainItemBuilder, ObjectList.DeleteOption) - Method in interface nxopen.cam.DriveChainItemBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.cam.GeometrySetList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.cam.GeometrySetList: Erases the object at the given position from the list.
erase(GeometrySet) - Method in interface nxopen.cam.GeometrySetList: Erases the object from the list, but does not delete the object.
erase(GeometrySet, ObjectList.DeleteOption) - Method in interface nxopen.cam.GeometrySetList: Erases the object from the list.
erase(int) - Method in interface nxopen.cam.HoldingSystemBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.cam.HoldingSystemBuilderList: Erases the object at the given position from the list.
erase(HoldingSystemBuilder) - Method in interface nxopen.cam.HoldingSystemBuilderList: Erases the object from the list, but does not delete the object.
erase(HoldingSystemBuilder, ObjectList.DeleteOption) - Method in interface nxopen.cam.HoldingSystemBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.cam.HoleBossSetList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.cam.HoleBossSetList: Erases the object at the given position from the list.
erase(HoleBossSet) - Method in interface nxopen.cam.HoleBossSetList: Erases the object from the list, but does not delete the object.
erase(HoleBossSet, ObjectList.DeleteOption) - Method in interface nxopen.cam.HoleBossSetList: Erases the object from the list.
erase(int) - Method in interface nxopen.cam.InPathEventDataBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.cam.InPathEventDataBuilderList: Erases the object at the given position from the list.
erase(InPathEventDataBuilder) - Method in interface nxopen.cam.InPathEventDataBuilderList: Erases the object from the list, but does not delete the object.
erase(InPathEventDataBuilder, ObjectList.DeleteOption) - Method in interface nxopen.cam.InPathEventDataBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.cam.InterpolateAngle: Delete an existing item by index
License requirements: cam_base ("CAM BASE")
.
erase(int) - Method in interface nxopen.cam.InterpolateVector: Delete an existing item by index
License requirements: cam_base ("CAM BASE")
.
erase(int) - Method in interface nxopen.cam.LaserControlPointList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.cam.LaserControlPointList: Erases the object at the given position from the list.
erase(LaserControlPoint) - Method in interface nxopen.cam.LaserControlPointList: Erases the object from the list, but does not delete the object.
erase(LaserControlPoint, ObjectList.DeleteOption) - Method in interface nxopen.cam.LaserControlPointList: Erases the object from the list.
erase(int) - Method in interface nxopen.cam.ManualFeatureBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.cam.ManualFeatureBuilderList: Erases the object at the given position from the list.
erase(ManualFeatureBuilder) - Method in interface nxopen.cam.ManualFeatureBuilderList: Erases the object from the list, but does not delete the object.
erase(ManualFeatureBuilder, ObjectList.DeleteOption) - Method in interface nxopen.cam.ManualFeatureBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.cam.SplitterList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.cam.SplitterList: Erases the object at the given position from the list.
erase(Splitter) - Method in interface nxopen.cam.SplitterList: Erases the object from the list, but does not delete the object.
erase(Splitter, ObjectList.DeleteOption) - Method in interface nxopen.cam.SplitterList: Erases the object from the list.
erase(int) - Method in interface nxopen.cam.SurfaceDriveGeometrySetList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.cam.SurfaceDriveGeometrySetList: Erases the object at the given position from the list.
erase(SurfaceDriveGeometrySet) - Method in interface nxopen.cam.SurfaceDriveGeometrySetList: Erases the object from the list, but does not delete the object.
erase(SurfaceDriveGeometrySet, ObjectList.DeleteOption) - Method in interface nxopen.cam.SurfaceDriveGeometrySetList: Erases the object from the list.
erase(int) - Method in interface nxopen.cam.TabPointDataBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.cam.TabPointDataBuilderList: Erases the object at the given position from the list.
erase(TabPointDataBuilder) - Method in interface nxopen.cam.TabPointDataBuilderList: Erases the object from the list, but does not delete the object.
erase(TabPointDataBuilder, ObjectList.DeleteOption) - Method in interface nxopen.cam.TabPointDataBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.cam.ThreadedBossSetList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.cam.ThreadedBossSetList: Erases the object at the given position from the list.
erase(ThreadedBossSet) - Method in interface nxopen.cam.ThreadedBossSetList: Erases the object from the list, but does not delete the object.
erase(ThreadedBossSet, ObjectList.DeleteOption) - Method in interface nxopen.cam.ThreadedBossSetList: Erases the object from the list.
erase(int) - Method in interface nxopen.cam.ThreadedHoleSetList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.cam.ThreadedHoleSetList: Erases the object at the given position from the list.
erase(ThreadedHoleSet) - Method in interface nxopen.cam.ThreadedHoleSetList: Erases the object from the list, but does not delete the object.
erase(ThreadedHoleSet, ObjectList.DeleteOption) - Method in interface nxopen.cam.ThreadedHoleSetList: Erases the object from the list.
erase(int) - Method in interface nxopen.cam.ToolPathSplitItemBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.cam.ToolPathSplitItemBuilderList: Erases the object at the given position from the list.
erase(ToolPathSplitItemBuilder) - Method in interface nxopen.cam.ToolPathSplitItemBuilderList: Erases the object from the list, but does not delete the object.
erase(ToolPathSplitItemBuilder, ObjectList.DeleteOption) - Method in interface nxopen.cam.ToolPathSplitItemBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.cam.UdeList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.cam.UdeList: Erases the object at the given position from the list.
erase(Ude) - Method in interface nxopen.cam.UdeList: Erases the object from the list, but does not delete the object.
erase(Ude, ObjectList.DeleteOption) - Method in interface nxopen.cam.UdeList: Erases the object from the list.
erase(int) - Method in interface nxopen.cam.WedmCustomBoundaryDataBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.cam.WedmCustomBoundaryDataBuilderList: Erases the object at the given position from the list.
erase(WedmCustomBoundaryDataBuilder) - Method in interface nxopen.cam.WedmCustomBoundaryDataBuilderList: Erases the object from the list, but does not delete the object.
erase(WedmCustomBoundaryDataBuilder, ObjectList.DeleteOption) - Method in interface nxopen.cam.WedmCustomBoundaryDataBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.cam.WireGuideList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.cam.WireGuideList: Erases the object at the given position from the list.
erase(WireGuide) - Method in interface nxopen.cam.WireGuideList: Erases the object from the list, but does not delete the object.
erase(WireGuide, ObjectList.DeleteOption) - Method in interface nxopen.cam.WireGuideList: Erases the object from the list.
erase(int) - Method in interface nxopen.DateItemBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.DateItemBuilderList: Erases the object at the given position from the list.
erase(DateItemBuilder) - Method in interface nxopen.DateItemBuilderList: Erases the object from the list, but does not delete the object.
erase(DateItemBuilder, ObjectList.DeleteOption) - Method in interface nxopen.DateItemBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.diagramming.ConnectionLocationBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.diagramming.ConnectionLocationBuilderList: Erases the object at the given position from the list.
erase(ConnectionLocationBuilder) - Method in interface nxopen.diagramming.ConnectionLocationBuilderList: Erases the object from the list, but does not delete the object.
erase(ConnectionLocationBuilder, ObjectList.DeleteOption) - Method in interface nxopen.diagramming.ConnectionLocationBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.diagramming.LeaderLineBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.diagramming.LeaderLineBuilderList: Erases the object at the given position from the list.
erase(LeaderLineBuilder) - Method in interface nxopen.diagramming.LeaderLineBuilderList: Erases the object from the list, but does not delete the object.
erase(LeaderLineBuilder, ObjectList.DeleteOption) - Method in interface nxopen.diagramming.LeaderLineBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.diagramming.PortBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.diagramming.PortBuilderList: Erases the object at the given position from the list.
erase(PortBuilder) - Method in interface nxopen.diagramming.PortBuilderList: Erases the object from the list, but does not delete the object.
erase(PortBuilder, ObjectList.DeleteOption) - Method in interface nxopen.diagramming.PortBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.diagramminglibraryauthor.LineTypeBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.diagramminglibraryauthor.LineTypeBuilderList: Erases the object at the given position from the list.
erase(LineTypeBuilder) - Method in interface nxopen.diagramminglibraryauthor.LineTypeBuilderList: Erases the object from the list, but does not delete the object.
erase(LineTypeBuilder, ObjectList.DeleteOption) - Method in interface nxopen.diagramminglibraryauthor.LineTypeBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.die.DieAssistantFlangeProfileList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.die.DieAssistantFlangeProfileList: Erases the object at the given position from the list.
erase(DieAssistantFlangeProfile) - Method in interface nxopen.die.DieAssistantFlangeProfileList: Erases the object from the list, but does not delete the object.
erase(DieAssistantFlangeProfile, ObjectList.DeleteOption) - Method in interface nxopen.die.DieAssistantFlangeProfileList: Erases the object from the list.
erase(int) - Method in interface nxopen.die.DieAssistantTrimProfileList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.die.DieAssistantTrimProfileList: Erases the object at the given position from the list.
erase(DieAssistantTrimProfile) - Method in interface nxopen.die.DieAssistantTrimProfileList: Erases the object from the list, but does not delete the object.
erase(DieAssistantTrimProfile, ObjectList.DeleteOption) - Method in interface nxopen.die.DieAssistantTrimProfileList: Erases the object from the list.
erase(int) - Method in interface nxopen.die.DieBooleanBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.die.DieBooleanBuilderList: Erases the object at the given position from the list.
erase(DieBooleanBuilder) - Method in interface nxopen.die.DieBooleanBuilderList: Erases the object from the list, but does not delete the object.
erase(DieBooleanBuilder, ObjectList.DeleteOption) - Method in interface nxopen.die.DieBooleanBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.die.DieLimitsBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.die.DieLimitsBuilderList: Erases the object at the given position from the list.
erase(DieLimitsBuilder) - Method in interface nxopen.die.DieLimitsBuilderList: Erases the object from the list, but does not delete the object.
erase(DieLimitsBuilder, ObjectList.DeleteOption) - Method in interface nxopen.die.DieLimitsBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.die.DieLocationBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.die.DieLocationBuilderList: Erases the object at the given position from the list.
erase(DieLocationBuilder) - Method in interface nxopen.die.DieLocationBuilderList: Erases the object from the list, but does not delete the object.
erase(DieLocationBuilder, ObjectList.DeleteOption) - Method in interface nxopen.die.DieLocationBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.die.DrawBeadSegmentBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.die.DrawBeadSegmentBuilderList: Erases the object at the given position from the list.
erase(DrawBeadSegmentBuilder) - Method in interface nxopen.die.DrawBeadSegmentBuilderList: Erases the object from the list, but does not delete the object.
erase(DrawBeadSegmentBuilder, ObjectList.DeleteOption) - Method in interface nxopen.die.DrawBeadSegmentBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.die.PierceItemBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.die.PierceItemBuilderList: Erases the object at the given position from the list.
erase(PierceItemBuilder) - Method in interface nxopen.die.PierceItemBuilderList: Erases the object from the list, but does not delete the object.
erase(PierceItemBuilder, ObjectList.DeleteOption) - Method in interface nxopen.die.PierceItemBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.display.PointCloudClippingBoxesListItemBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.display.PointCloudClippingBoxesListItemBuilderList: Erases the object at the given position from the list.
erase(PointCloudClippingBoxesListItemBuilder) - Method in interface nxopen.display.PointCloudClippingBoxesListItemBuilderList: Erases the object from the list, but does not delete the object.
erase(PointCloudClippingBoxesListItemBuilder, ObjectList.DeleteOption) - Method in interface nxopen.display.PointCloudClippingBoxesListItemBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.drafting.AttributeItemBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.drafting.AttributeItemBuilderList: Erases the object at the given position from the list.
erase(AttributeItemBuilder) - Method in interface nxopen.drafting.AttributeItemBuilderList: Erases the object from the list, but does not delete the object.
erase(AttributeItemBuilder, ObjectList.DeleteOption) - Method in interface nxopen.drafting.AttributeItemBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.drafting.PrimaryContentItemBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.drafting.PrimaryContentItemBuilderList: Erases the object at the given position from the list.
erase(PrimaryContentItemBuilder) - Method in interface nxopen.drafting.PrimaryContentItemBuilderList: Erases the object from the list, but does not delete the object.
erase(PrimaryContentItemBuilder, ObjectList.DeleteOption) - Method in interface nxopen.drafting.PrimaryContentItemBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.drawings.SectionLineSegmentBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.drawings.SectionLineSegmentBuilderList: Erases the object at the given position from the list.
erase(SectionLineSegmentBuilder) - Method in interface nxopen.drawings.SectionLineSegmentBuilderList: Erases the object from the list, but does not delete the object.
erase(SectionLineSegmentBuilder, ObjectList.DeleteOption) - Method in interface nxopen.drawings.SectionLineSegmentBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilderList: Erases the object at the given position from the list.
erase(ShipDraftingViewLinesBuilder) - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilderList: Erases the object from the list, but does not delete the object.
erase(ShipDraftingViewLinesBuilder, ObjectList.DeleteOption) - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.drawings.ViewStyleShipbuildingLinesBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.drawings.ViewStyleShipbuildingLinesBuilderList: Erases the object at the given position from the list.
erase(ViewStyleShipbuildingLinesBuilder) - Method in interface nxopen.drawings.ViewStyleShipbuildingLinesBuilderList: Erases the object from the list, but does not delete the object.
erase(ViewStyleShipbuildingLinesBuilder, ObjectList.DeleteOption) - Method in interface nxopen.drawings.ViewStyleShipbuildingLinesBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.ExpressionCollectorSetList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.ExpressionCollectorSetList: Erases the object at the given position from the list.
erase(ExpressionCollectorSet) - Method in interface nxopen.ExpressionCollectorSetList: Erases the object from the list, but does not delete the object.
erase(ExpressionCollectorSet, ObjectList.DeleteOption) - Method in interface nxopen.ExpressionCollectorSetList: Erases the object from the list.
erase(int) - Method in interface nxopen.ExpressionSectionSetList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.ExpressionSectionSetList: Erases the object at the given position from the list.
erase(ExpressionSectionSet) - Method in interface nxopen.ExpressionSectionSetList: Erases the object from the list, but does not delete the object.
erase(ExpressionSectionSet, ObjectList.DeleteOption) - Method in interface nxopen.ExpressionSectionSetList: Erases the object from the list.
erase(int) - Method in interface nxopen.features.FeatureList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.features.FeatureList: Erases the object at the given position from the list.
erase(Feature) - Method in interface nxopen.features.FeatureList: Erases the object from the list, but does not delete the object.
erase(Feature, ObjectList.DeleteOption) - Method in interface nxopen.features.FeatureList: Erases the object from the list.
erase(int) - Method in interface nxopen.features.GlobalShapingCurveOffsetBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.features.GlobalShapingCurveOffsetBuilderList: Erases the object at the given position from the list.
erase(GlobalShapingCurveOffsetBuilder) - Method in interface nxopen.features.GlobalShapingCurveOffsetBuilderList: Erases the object from the list, but does not delete the object.
erase(GlobalShapingCurveOffsetBuilder, ObjectList.DeleteOption) - Method in interface nxopen.features.GlobalShapingCurveOffsetBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.features.GlobalShapingPointOffsetBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.features.GlobalShapingPointOffsetBuilderList: Erases the object at the given position from the list.
erase(GlobalShapingPointOffsetBuilder) - Method in interface nxopen.features.GlobalShapingPointOffsetBuilderList: Erases the object from the list, but does not delete the object.
erase(GlobalShapingPointOffsetBuilder, ObjectList.DeleteOption) - Method in interface nxopen.features.GlobalShapingPointOffsetBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.features.PartGeometryCopySelectBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.features.PartGeometryCopySelectBuilderList: Erases the object at the given position from the list.
erase(PartGeometryCopySelectBuilder) - Method in interface nxopen.features.PartGeometryCopySelectBuilderList: Erases the object from the list, but does not delete the object.
erase(PartGeometryCopySelectBuilder, ObjectList.DeleteOption) - Method in interface nxopen.features.PartGeometryCopySelectBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.features.PointSetFacePercentageBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.features.PointSetFacePercentageBuilderList: Erases the object at the given position from the list.
erase(PointSetFacePercentageBuilder) - Method in interface nxopen.features.PointSetFacePercentageBuilderList: Erases the object from the list, but does not delete the object.
erase(PointSetFacePercentageBuilder, ObjectList.DeleteOption) - Method in interface nxopen.features.PointSetFacePercentageBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.features.RegionListItemBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.features.RegionListItemBuilderList: Erases the object at the given position from the list.
erase(RegionListItemBuilder) - Method in interface nxopen.features.RegionListItemBuilderList: Erases the object from the list, but does not delete the object.
erase(RegionListItemBuilder, ObjectList.DeleteOption) - Method in interface nxopen.features.RegionListItemBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.features.sheetmetal.BendListItemBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.features.sheetmetal.BendListItemBuilderList: Erases the object at the given position from the list.
erase(BendListItemBuilder) - Method in interface nxopen.features.sheetmetal.BendListItemBuilderList: Erases the object from the list, but does not delete the object.
erase(BendListItemBuilder, ObjectList.DeleteOption) - Method in interface nxopen.features.sheetmetal.BendListItemBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.features.sheetmetal.ConvertInputListItemBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.features.sheetmetal.ConvertInputListItemBuilderList: Erases the object at the given position from the list.
erase(ConvertInputListItemBuilder) - Method in interface nxopen.features.sheetmetal.ConvertInputListItemBuilderList: Erases the object from the list, but does not delete the object.
erase(ConvertInputListItemBuilder, ObjectList.DeleteOption) - Method in interface nxopen.features.sheetmetal.ConvertInputListItemBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.features.sheetmetal.FeatureBendPropertiesBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.features.sheetmetal.FeatureBendPropertiesBuilderList: Erases the object at the given position from the list.
erase(FeatureBendPropertiesBuilder) - Method in interface nxopen.features.sheetmetal.FeatureBendPropertiesBuilderList: Erases the object from the list, but does not delete the object.
erase(FeatureBendPropertiesBuilder, ObjectList.DeleteOption) - Method in interface nxopen.features.sheetmetal.FeatureBendPropertiesBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.features.sheetmetal.JoggleInputListItemBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.features.sheetmetal.JoggleInputListItemBuilderList: Erases the object at the given position from the list.
erase(JoggleInputListItemBuilder) - Method in interface nxopen.features.sheetmetal.JoggleInputListItemBuilderList: Erases the object from the list, but does not delete the object.
erase(JoggleInputListItemBuilder, ObjectList.DeleteOption) - Method in interface nxopen.features.sheetmetal.JoggleInputListItemBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.features.sheetmetal.SMBoundaryConditionBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.features.sheetmetal.SMBoundaryConditionBuilderList: Erases the object at the given position from the list.
erase(SMBoundaryConditionBuilder) - Method in interface nxopen.features.sheetmetal.SMBoundaryConditionBuilderList: Erases the object from the list, but does not delete the object.
erase(SMBoundaryConditionBuilder, ObjectList.DeleteOption) - Method in interface nxopen.features.sheetmetal.SMBoundaryConditionBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.features.shipdesign.AnchorPointList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.features.shipdesign.AnchorPointList: Erases the object at the given position from the list.
erase(AnchorPoint) - Method in interface nxopen.features.shipdesign.AnchorPointList: Erases the object from the list, but does not delete the object.
erase(AnchorPoint, ObjectList.DeleteOption) - Method in interface nxopen.features.shipdesign.AnchorPointList: Erases the object from the list.
erase(int) - Method in interface nxopen.features.shipdesign.BulkHeadListItemBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.features.shipdesign.BulkHeadListItemBuilderList: Erases the object at the given position from the list.
erase(BulkHeadListItemBuilder) - Method in interface nxopen.features.shipdesign.BulkHeadListItemBuilderList: Erases the object from the list, but does not delete the object.
erase(BulkHeadListItemBuilder, ObjectList.DeleteOption) - Method in interface nxopen.features.shipdesign.BulkHeadListItemBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.features.shipdesign.CornerCutListItemBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.features.shipdesign.CornerCutListItemBuilderList: Erases the object at the given position from the list.
erase(CornerCutListItemBuilder) - Method in interface nxopen.features.shipdesign.CornerCutListItemBuilderList: Erases the object from the list, but does not delete the object.
erase(CornerCutListItemBuilder, ObjectList.DeleteOption) - Method in interface nxopen.features.shipdesign.CornerCutListItemBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.features.shipdesign.DeckListItemBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.features.shipdesign.DeckListItemBuilderList: Erases the object at the given position from the list.
erase(DeckListItemBuilder) - Method in interface nxopen.features.shipdesign.DeckListItemBuilderList: Erases the object from the list, but does not delete the object.
erase(DeckListItemBuilder, ObjectList.DeleteOption) - Method in interface nxopen.features.shipdesign.DeckListItemBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.features.shipdesign.DrawingPartBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.features.shipdesign.DrawingPartBuilderList: Erases the object at the given position from the list.
erase(DrawingPartBuilder) - Method in interface nxopen.features.shipdesign.DrawingPartBuilderList: Erases the object from the list, but does not delete the object.
erase(DrawingPartBuilder, ObjectList.DeleteOption) - Method in interface nxopen.features.shipdesign.DrawingPartBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.features.shipdesign.DrawingSheetBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.features.shipdesign.DrawingSheetBuilderList: Erases the object at the given position from the list.
erase(DrawingSheetBuilder) - Method in interface nxopen.features.shipdesign.DrawingSheetBuilderList: Erases the object from the list, but does not delete the object.
erase(DrawingSheetBuilder, ObjectList.DeleteOption) - Method in interface nxopen.features.shipdesign.DrawingSheetBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.features.shipdesign.ItFrameListItemBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.features.shipdesign.ItFrameListItemBuilderList: Erases the object at the given position from the list.
erase(ItFrameListItemBuilder) - Method in interface nxopen.features.shipdesign.ItFrameListItemBuilderList: Erases the object from the list, but does not delete the object.
erase(ItFrameListItemBuilder, ObjectList.DeleteOption) - Method in interface nxopen.features.shipdesign.ItFrameListItemBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.features.shipdesign.OrientationRegionItemBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.features.shipdesign.OrientationRegionItemBuilderList: Erases the object at the given position from the list.
erase(OrientationRegionItemBuilder) - Method in interface nxopen.features.shipdesign.OrientationRegionItemBuilderList: Erases the object from the list, but does not delete the object.
erase(OrientationRegionItemBuilder, ObjectList.DeleteOption) - Method in interface nxopen.features.shipdesign.OrientationRegionItemBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.features.shipdesign.PlaneListBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.features.shipdesign.PlaneListBuilderList: Erases the object at the given position from the list.
erase(PlaneListBuilder) - Method in interface nxopen.features.shipdesign.PlaneListBuilderList: Erases the object from the list, but does not delete the object.
erase(PlaneListBuilder, ObjectList.DeleteOption) - Method in interface nxopen.features.shipdesign.PlaneListBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.features.shipdesign.PlateBoundaryOptionBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.features.shipdesign.PlateBoundaryOptionBuilderList: Erases the object at the given position from the list.
erase(PlateBoundaryOptionBuilder) - Method in interface nxopen.features.shipdesign.PlateBoundaryOptionBuilderList: Erases the object from the list, but does not delete the object.
erase(PlateBoundaryOptionBuilder, ObjectList.DeleteOption) - Method in interface nxopen.features.shipdesign.PlateBoundaryOptionBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.features.shipdesign.SeamBlockBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.features.shipdesign.SeamBlockBuilderList: Erases the object at the given position from the list.
erase(SeamBlockBuilder) - Method in interface nxopen.features.shipdesign.SeamBlockBuilderList: Erases the object from the list, but does not delete the object.
erase(SeamBlockBuilder, ObjectList.DeleteOption) - Method in interface nxopen.features.shipdesign.SeamBlockBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.features.shipdesign.SectionViewBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.features.shipdesign.SectionViewBuilderList: Erases the object at the given position from the list.
erase(SectionViewBuilder) - Method in interface nxopen.features.shipdesign.SectionViewBuilderList: Erases the object from the list, but does not delete the object.
erase(SectionViewBuilder, ObjectList.DeleteOption) - Method in interface nxopen.features.shipdesign.SectionViewBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.features.shipdesign.ShipNamesBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.features.shipdesign.ShipNamesBuilderList: Erases the object at the given position from the list.
erase(ShipNamesBuilder) - Method in interface nxopen.features.shipdesign.ShipNamesBuilderList: Erases the object from the list, but does not delete the object.
erase(ShipNamesBuilder, ObjectList.DeleteOption) - Method in interface nxopen.features.shipdesign.ShipNamesBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.features.shipdesign.StandardPartItemBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.features.shipdesign.StandardPartItemBuilderList: Erases the object at the given position from the list.
erase(StandardPartItemBuilder) - Method in interface nxopen.features.shipdesign.StandardPartItemBuilderList: Erases the object from the list, but does not delete the object.
erase(StandardPartItemBuilder, ObjectList.DeleteOption) - Method in interface nxopen.features.shipdesign.StandardPartItemBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.features.shipdesign.SteelInsulationBoundaryBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.features.shipdesign.SteelInsulationBoundaryBuilderList: Erases the object at the given position from the list.
erase(SteelInsulationBoundaryBuilder) - Method in interface nxopen.features.shipdesign.SteelInsulationBoundaryBuilderList: Erases the object from the list, but does not delete the object.
erase(SteelInsulationBoundaryBuilder, ObjectList.DeleteOption) - Method in interface nxopen.features.shipdesign.SteelInsulationBoundaryBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.features.shipdesign.SubSystemBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.features.shipdesign.SubSystemBuilderList: Erases the object at the given position from the list.
erase(SubSystemBuilder) - Method in interface nxopen.features.shipdesign.SubSystemBuilderList: Erases the object from the list, but does not delete the object.
erase(SubSystemBuilder, ObjectList.DeleteOption) - Method in interface nxopen.features.shipdesign.SubSystemBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.features.shipdesign.TransFrameListItemBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.features.shipdesign.TransFrameListItemBuilderList: Erases the object at the given position from the list.
erase(TransFrameListItemBuilder) - Method in interface nxopen.features.shipdesign.TransFrameListItemBuilderList: Erases the object from the list, but does not delete the object.
erase(TransFrameListItemBuilder, ObjectList.DeleteOption) - Method in interface nxopen.features.shipdesign.TransFrameListItemBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.features.SmoothRangeBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.features.SmoothRangeBuilderList: Erases the object at the given position from the list.
erase(SmoothRangeBuilder) - Method in interface nxopen.features.SmoothRangeBuilderList: Erases the object from the list, but does not delete the object.
erase(SmoothRangeBuilder, ObjectList.DeleteOption) - Method in interface nxopen.features.SmoothRangeBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.features.subdivision.CageSectionDataList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.features.subdivision.CageSectionDataList: Erases the object at the given position from the list.
erase(CageSectionData) - Method in interface nxopen.features.subdivision.CageSectionDataList: Erases the object from the list, but does not delete the object.
erase(CageSectionData, ObjectList.DeleteOption) - Method in interface nxopen.features.subdivision.CageSectionDataList: Erases the object from the list.
erase(int) - Method in interface nxopen.features.VariableRadiusPointsBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.features.VariableRadiusPointsBuilderList: Erases the object at the given position from the list.
erase(VariableRadiusPointsBuilder) - Method in interface nxopen.features.VariableRadiusPointsBuilderList: Erases the object from the list, but does not delete the object.
erase(VariableRadiusPointsBuilder, ObjectList.DeleteOption) - Method in interface nxopen.features.VariableRadiusPointsBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.features.vehicledesign.CloseRangeCameraListItemBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.features.vehicledesign.CloseRangeCameraListItemBuilderList: Erases the object at the given position from the list.
erase(CloseRangeCameraListItemBuilder) - Method in interface nxopen.features.vehicledesign.CloseRangeCameraListItemBuilderList: Erases the object from the list, but does not delete the object.
erase(CloseRangeCameraListItemBuilder, ObjectList.DeleteOption) - Method in interface nxopen.features.vehicledesign.CloseRangeCameraListItemBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.features.vehicledesign.CloseRangeDemoCylinderListItemBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.features.vehicledesign.CloseRangeDemoCylinderListItemBuilderList: Erases the object at the given position from the list.
erase(CloseRangeDemoCylinderListItemBuilder) - Method in interface nxopen.features.vehicledesign.CloseRangeDemoCylinderListItemBuilderList: Erases the object from the list, but does not delete the object.
erase(CloseRangeDemoCylinderListItemBuilder, ObjectList.DeleteOption) - Method in interface nxopen.features.vehicledesign.CloseRangeDemoCylinderListItemBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.fields.PathObjectsList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.fields.PathObjectsList: Erases the object at the given position from the list.
erase(PathObjects) - Method in interface nxopen.fields.PathObjectsList: Erases the object from the list, but does not delete the object.
erase(PathObjects, ObjectList.DeleteOption) - Method in interface nxopen.fields.PathObjectsList: Erases the object from the list.
erase(int) - Method in interface nxopen.geometricutilities.BlendSetbackBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.BlendSetbackBuilderList: Erases the object at the given position from the list.
erase(BlendSetbackBuilder) - Method in interface nxopen.geometricutilities.BlendSetbackBuilderList: Erases the object from the list, but does not delete the object.
erase(BlendSetbackBuilder, ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.BlendSetbackBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.geometricutilities.BoundaryDefinitionBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.BoundaryDefinitionBuilderList: Erases the object at the given position from the list.
erase(BoundaryDefinitionBuilder) - Method in interface nxopen.geometricutilities.BoundaryDefinitionBuilderList: Erases the object from the list, but does not delete the object.
erase(BoundaryDefinitionBuilder, ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.BoundaryDefinitionBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.geometricutilities.BoundingObjectBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.BoundingObjectBuilderList: Erases the object at the given position from the list.
erase(BoundingObjectBuilder) - Method in interface nxopen.geometricutilities.BoundingObjectBuilderList: Erases the object from the list, but does not delete the object.
erase(BoundingObjectBuilder, ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.BoundingObjectBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.geometricutilities.EntityUsageInfoList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.EntityUsageInfoList: Erases the object at the given position from the list.
erase(EntityUsageInfo) - Method in interface nxopen.geometricutilities.EntityUsageInfoList: Erases the object from the list, but does not delete the object.
erase(EntityUsageInfo, ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.EntityUsageInfoList: Erases the object from the list.
erase(int) - Method in interface nxopen.geometricutilities.FaceSetOffsetList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.FaceSetOffsetList: Erases the object at the given position from the list.
erase(FaceSetOffset) - Method in interface nxopen.geometricutilities.FaceSetOffsetList: Erases the object from the list, but does not delete the object.
erase(FaceSetOffset, ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.FaceSetOffsetList: Erases the object from the list.
erase(int) - Method in interface nxopen.geometricutilities.FtmFixedCurvesBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.FtmFixedCurvesBuilderList: Erases the object at the given position from the list.
erase(FtmFixedCurvesBuilder) - Method in interface nxopen.geometricutilities.FtmFixedCurvesBuilderList: Erases the object from the list, but does not delete the object.
erase(FtmFixedCurvesBuilder, ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.FtmFixedCurvesBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.geometricutilities.FtmTransformCurvesBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.FtmTransformCurvesBuilderList: Erases the object at the given position from the list.
erase(FtmTransformCurvesBuilder) - Method in interface nxopen.geometricutilities.FtmTransformCurvesBuilderList: Erases the object from the list, but does not delete the object.
erase(FtmTransformCurvesBuilder, ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.FtmTransformCurvesBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.geometricutilities.FtmTransformPointsBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.FtmTransformPointsBuilderList: Erases the object at the given position from the list.
erase(FtmTransformPointsBuilder) - Method in interface nxopen.geometricutilities.FtmTransformPointsBuilderList: Erases the object from the list, but does not delete the object.
erase(FtmTransformPointsBuilder, ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.FtmTransformPointsBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.geometricutilities.InstanceEditedExpressionItemList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.InstanceEditedExpressionItemList: Erases the object at the given position from the list.
erase(InstanceEditedExpressionItem) - Method in interface nxopen.geometricutilities.InstanceEditedExpressionItemList: Erases the object from the list, but does not delete the object.
erase(InstanceEditedExpressionItem, ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.InstanceEditedExpressionItemList: Erases the object from the list.
erase(int) - Method in interface nxopen.geometricutilities.ParentEquivalencyMapList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.ParentEquivalencyMapList: Erases the object at the given position from the list.
erase(ParentEquivalencyMap) - Method in interface nxopen.geometricutilities.ParentEquivalencyMapList: Erases the object from the list, but does not delete the object.
erase(ParentEquivalencyMap, ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.ParentEquivalencyMapList: Erases the object from the list.
erase(int) - Method in interface nxopen.geometricutilities.PatternIncrementItemList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.PatternIncrementItemList: Erases the object at the given position from the list.
erase(PatternIncrementItem) - Method in interface nxopen.geometricutilities.PatternIncrementItemList: Erases the object from the list, but does not delete the object.
erase(PatternIncrementItem, ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.PatternIncrementItemList: Erases the object from the list.
erase(int) - Method in interface nxopen.geometricutilities.PatternSpacingsListItemList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.PatternSpacingsListItemList: Erases the object at the given position from the list.
erase(PatternSpacingsListItem) - Method in interface nxopen.geometricutilities.PatternSpacingsListItemList: Erases the object from the list, but does not delete the object.
erase(PatternSpacingsListItem, ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.PatternSpacingsListItemList: Erases the object from the list.
erase(int) - Method in interface nxopen.geometricutilities.ReduceSurfaceRadiusFaceGroupBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.ReduceSurfaceRadiusFaceGroupBuilderList: Erases the object at the given position from the list.
erase(ReduceSurfaceRadiusFaceGroupBuilder) - Method in interface nxopen.geometricutilities.ReduceSurfaceRadiusFaceGroupBuilderList: Erases the object from the list, but does not delete the object.
erase(ReduceSurfaceRadiusFaceGroupBuilder, ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.ReduceSurfaceRadiusFaceGroupBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.geometricutilities.RotationSetBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.RotationSetBuilderList: Erases the object at the given position from the list.
erase(RotationSetBuilder) - Method in interface nxopen.geometricutilities.RotationSetBuilderList: Erases the object from the list, but does not delete the object.
erase(RotationSetBuilder, ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.RotationSetBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.geometricutilities.ScalingSetBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.ScalingSetBuilderList: Erases the object at the given position from the list.
erase(ScalingSetBuilder) - Method in interface nxopen.geometricutilities.ScalingSetBuilderList: Erases the object from the list, but does not delete the object.
erase(ScalingSetBuilder, ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.ScalingSetBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.geometricutilities.SelectionListList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.SelectionListList: Erases the object at the given position from the list.
erase(SelectionList) - Method in interface nxopen.geometricutilities.SelectionListList: Erases the object from the list, but does not delete the object.
erase(SelectionList, ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.SelectionListList: Erases the object from the list.
erase(int) - Method in interface nxopen.geometricutilities.SpinePlaneBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.SpinePlaneBuilderList: Erases the object at the given position from the list.
erase(SpinePlaneBuilder) - Method in interface nxopen.geometricutilities.SpinePlaneBuilderList: Erases the object from the list, but does not delete the object.
erase(SpinePlaneBuilder, ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.SpinePlaneBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.geometricutilities.StyledSweepDoubleOnPathDimBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.StyledSweepDoubleOnPathDimBuilderList: Erases the object at the given position from the list.
erase(StyledSweepDoubleOnPathDimBuilder) - Method in interface nxopen.geometricutilities.StyledSweepDoubleOnPathDimBuilderList: Erases the object from the list, but does not delete the object.
erase(StyledSweepDoubleOnPathDimBuilder, ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.StyledSweepDoubleOnPathDimBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.geometricutilities.TransitionCurveBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.TransitionCurveBuilderList: Erases the object at the given position from the list.
erase(TransitionCurveBuilder) - Method in interface nxopen.geometricutilities.TransitionCurveBuilderList: Erases the object from the list, but does not delete the object.
erase(TransitionCurveBuilder, ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.TransitionCurveBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.geometricutilities.TransitionLawNodeBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.TransitionLawNodeBuilderList: Erases the object at the given position from the list.
erase(TransitionLawNodeBuilder) - Method in interface nxopen.geometricutilities.TransitionLawNodeBuilderList: Erases the object from the list, but does not delete the object.
erase(TransitionLawNodeBuilder, ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.TransitionLawNodeBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.geometricutilities.TrimCurveBoundingObjectBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.TrimCurveBoundingObjectBuilderList: Erases the object at the given position from the list.
erase(TrimCurveBoundingObjectBuilder) - Method in interface nxopen.geometricutilities.TrimCurveBoundingObjectBuilderList: Erases the object from the list, but does not delete the object.
erase(TrimCurveBoundingObjectBuilder, ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.TrimCurveBoundingObjectBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.geometricutilities.TwoExpressionsCollectorSetList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.TwoExpressionsCollectorSetList: Erases the object at the given position from the list.
erase(TwoExpressionsCollectorSet) - Method in interface nxopen.geometricutilities.TwoExpressionsCollectorSetList: Erases the object from the list, but does not delete the object.
erase(TwoExpressionsCollectorSet, ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.TwoExpressionsCollectorSetList: Erases the object from the list.
erase(int) - Method in interface nxopen.geometricutilities.TwoExpressionsSectionSetList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.TwoExpressionsSectionSetList: Erases the object at the given position from the list.
erase(TwoExpressionsSectionSet) - Method in interface nxopen.geometricutilities.TwoExpressionsSectionSetList: Erases the object from the list, but does not delete the object.
erase(TwoExpressionsSectionSet, ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.TwoExpressionsSectionSetList: Erases the object from the list.
erase(int) - Method in interface nxopen.ListCreatorList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.ListCreatorList: Erases the object at the given position from the list.
erase(ListCreator) - Method in interface nxopen.ListCreatorList: Erases the object from the list, but does not delete the object.
erase(ListCreator, ObjectList.DeleteOption) - Method in interface nxopen.ListCreatorList: Erases the object from the list.
erase(int) - Method in interface nxopen.mechanicalrouting.PathTransitionBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.mechanicalrouting.PathTransitionBuilderList: Erases the object at the given position from the list.
erase(PathTransitionBuilder) - Method in interface nxopen.mechanicalrouting.PathTransitionBuilderList: Erases the object from the list, but does not delete the object.
erase(PathTransitionBuilder, ObjectList.DeleteOption) - Method in interface nxopen.mechanicalrouting.PathTransitionBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.mechatronics.ExternalConnectionElementBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.mechatronics.ExternalConnectionElementBuilderList: Erases the object at the given position from the list.
erase(ExternalConnectionElementBuilder) - Method in interface nxopen.mechatronics.ExternalConnectionElementBuilderList: Erases the object from the list, but does not delete the object.
erase(ExternalConnectionElementBuilder, ObjectList.DeleteOption) - Method in interface nxopen.mechatronics.ExternalConnectionElementBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.mechatronics.GanttOperationConditionBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.mechatronics.GanttOperationConditionBuilderList: Erases the object at the given position from the list.
erase(GanttOperationConditionBuilder) - Method in interface nxopen.mechatronics.GanttOperationConditionBuilderList: Erases the object from the list, but does not delete the object.
erase(GanttOperationConditionBuilder, ObjectList.DeleteOption) - Method in interface nxopen.mechatronics.GanttOperationConditionBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.mechatronics.GanttOperationParameterBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.mechatronics.GanttOperationParameterBuilderList: Erases the object at the given position from the list.
erase(GanttOperationParameterBuilder) - Method in interface nxopen.mechatronics.GanttOperationParameterBuilderList: Erases the object from the list, but does not delete the object.
erase(GanttOperationParameterBuilder, ObjectList.DeleteOption) - Method in interface nxopen.mechatronics.GanttOperationParameterBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.mechatronics.MATLABSignalConnectionBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.mechatronics.MATLABSignalConnectionBuilderList: Erases the object at the given position from the list.
erase(MATLABSignalConnectionBuilder) - Method in interface nxopen.mechatronics.MATLABSignalConnectionBuilderList: Erases the object from the list, but does not delete the object.
erase(MATLABSignalConnectionBuilder, ObjectList.DeleteOption) - Method in interface nxopen.mechatronics.MATLABSignalConnectionBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.mechatronics.PathConstraintFrameBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.mechatronics.PathConstraintFrameBuilderList: Erases the object at the given position from the list.
erase(PathConstraintFrameBuilder) - Method in interface nxopen.mechatronics.PathConstraintFrameBuilderList: Erases the object from the list, but does not delete the object.
erase(PathConstraintFrameBuilder, ObjectList.DeleteOption) - Method in interface nxopen.mechatronics.PathConstraintFrameBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.mechatronics.ProxyObjectParameterBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.mechatronics.ProxyObjectParameterBuilderList: Erases the object at the given position from the list.
erase(ProxyObjectParameterBuilder) - Method in interface nxopen.mechatronics.ProxyObjectParameterBuilderList: Erases the object from the list, but does not delete the object.
erase(ProxyObjectParameterBuilder, ObjectList.DeleteOption) - Method in interface nxopen.mechatronics.ProxyObjectParameterBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.mechatronics.RuntimeFormulaParameterBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.mechatronics.RuntimeFormulaParameterBuilderList: Erases the object at the given position from the list.
erase(RuntimeFormulaParameterBuilder) - Method in interface nxopen.mechatronics.RuntimeFormulaParameterBuilderList: Erases the object from the list, but does not delete the object.
erase(RuntimeFormulaParameterBuilder, ObjectList.DeleteOption) - Method in interface nxopen.mechatronics.RuntimeFormulaParameterBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.mechatronics.SensorsActuatorsListBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.mechatronics.SensorsActuatorsListBuilderList: Erases the object at the given position from the list.
erase(SensorsActuatorsListBuilder) - Method in interface nxopen.mechatronics.SensorsActuatorsListBuilderList: Erases the object from the list, but does not delete the object.
erase(SensorsActuatorsListBuilder, ObjectList.DeleteOption) - Method in interface nxopen.mechatronics.SensorsActuatorsListBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.mechatronics.SHMSignalConnectionBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.mechatronics.SHMSignalConnectionBuilderList: Erases the object at the given position from the list.
erase(SHMSignalConnectionBuilder) - Method in interface nxopen.mechatronics.SHMSignalConnectionBuilderList: Erases the object from the list, but does not delete the object.
erase(SHMSignalConnectionBuilder, ObjectList.DeleteOption) - Method in interface nxopen.mechatronics.SHMSignalConnectionBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.mechatronics.SignalConnectionBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.mechatronics.SignalConnectionBuilderList: Erases the object at the given position from the list.
erase(SignalConnectionBuilder) - Method in interface nxopen.mechatronics.SignalConnectionBuilderList: Erases the object from the list, but does not delete the object.
erase(SignalConnectionBuilder, ObjectList.DeleteOption) - Method in interface nxopen.mechatronics.SignalConnectionBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.mechatronics.SignalMappingConnectionBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.mechatronics.SignalMappingConnectionBuilderList: Erases the object at the given position from the list.
erase(SignalMappingConnectionBuilder) - Method in interface nxopen.mechatronics.SignalMappingConnectionBuilderList: Erases the object from the list, but does not delete the object.
erase(SignalMappingConnectionBuilder, ObjectList.DeleteOption) - Method in interface nxopen.mechatronics.SignalMappingConnectionBuilderList: Erases the object from the list.
erase() - Method in interface nxopen.ModelingViewHighQualityImage: Erases the previously generated high qualilty image of a view.
erase(int) - Method in interface nxopen.ModelingViewList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.ModelingViewList: Erases the object at the given position from the list.
erase(ModelingView) - Method in interface nxopen.ModelingViewList: Erases the object from the list, but does not delete the object.
erase(ModelingView, ObjectList.DeleteOption) - Method in interface nxopen.ModelingViewList: Erases the object from the list.
erase(int) - Method in interface nxopen.motion.ConfigurationParameterList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.motion.ConfigurationParameterList: Erases the object at the given position from the list.
erase(ConfigurationParameter) - Method in interface nxopen.motion.ConfigurationParameterList: Erases the object from the list, but does not delete the object.
erase(ConfigurationParameter, ObjectList.DeleteOption) - Method in interface nxopen.motion.ConfigurationParameterList: Erases the object from the list.
erase(int) - Method in interface nxopen.motion.ControlInputPortBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.motion.ControlInputPortBuilderList: Erases the object at the given position from the list.
erase(ControlInputPortBuilder) - Method in interface nxopen.motion.ControlInputPortBuilderList: Erases the object from the list, but does not delete the object.
erase(ControlInputPortBuilder, ObjectList.DeleteOption) - Method in interface nxopen.motion.ControlInputPortBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.motion.InputPortAssociationList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.motion.InputPortAssociationList: Erases the object at the given position from the list.
erase(InputPortAssociation) - Method in interface nxopen.motion.InputPortAssociationList: Erases the object from the list, but does not delete the object.
erase(InputPortAssociation, ObjectList.DeleteOption) - Method in interface nxopen.motion.InputPortAssociationList: Erases the object from the list.
erase(int) - Method in interface nxopen.motion.OutputPortAssociationList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.motion.OutputPortAssociationList: Erases the object at the given position from the list.
erase(OutputPortAssociation) - Method in interface nxopen.motion.OutputPortAssociationList: Erases the object from the list, but does not delete the object.
erase(OutputPortAssociation, ObjectList.DeleteOption) - Method in interface nxopen.motion.OutputPortAssociationList: Erases the object from the list.
erase(int) - Method in interface nxopen.motion.PortVariableList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.motion.PortVariableList: Erases the object at the given position from the list.
erase(PortVariable) - Method in interface nxopen.motion.PortVariableList: Erases the object from the list, but does not delete the object.
erase(PortVariable, ObjectList.DeleteOption) - Method in interface nxopen.motion.PortVariableList: Erases the object from the list.
erase(int) - Method in interface nxopen.motion.SegmentBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.motion.SegmentBuilderList: Erases the object at the given position from the list.
erase(SegmentBuilder) - Method in interface nxopen.motion.SegmentBuilderList: Erases the object from the list, but does not delete the object.
erase(SegmentBuilder, ObjectList.DeleteOption) - Method in interface nxopen.motion.SegmentBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.motion.SignalChartListItemList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.motion.SignalChartListItemList: Erases the object at the given position from the list.
erase(SignalChartListItem) - Method in interface nxopen.motion.SignalChartListItemList: Erases the object from the list, but does not delete the object.
erase(SignalChartListItem, ObjectList.DeleteOption) - Method in interface nxopen.motion.SignalChartListItemList: Erases the object from the list.
erase(int) - Method in interface nxopen.NXObjectList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.NXObjectList: Erases the object at the given position from the list.
erase(NXObject) - Method in interface nxopen.NXObjectList: Erases the object from the list, but does not delete the object.
erase(NXObject, ObjectList.DeleteOption) - Method in interface nxopen.NXObjectList: Erases the object from the list.
erase(int) - Method in interface nxopen.ObjectList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.ObjectList: Erases the object at the given position from the list.
erase(TaggedObject) - Method in interface nxopen.ObjectList: Erases the object from the list, but does not delete the object.
erase(TaggedObject, ObjectList.DeleteOption) - Method in interface nxopen.ObjectList: Erases the object from the list.
erase(int) - Method in interface nxopen.PlaneList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.PlaneList: Erases the object at the given position from the list.
erase(Plane) - Method in interface nxopen.PlaneList: Erases the object from the list, but does not delete the object.
erase(Plane, ObjectList.DeleteOption) - Method in interface nxopen.PlaneList: Erases the object from the list.
erase(int) - Method in interface nxopen.PointList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.PointList: Erases the object at the given position from the list.
erase(Point) - Method in interface nxopen.PointList: Erases the object from the list, but does not delete the object.
erase(Point, ObjectList.DeleteOption) - Method in interface nxopen.PointList: Erases the object from the list.
erase(int) - Method in interface nxopen.presslinesimulation.HydraulicLifterBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.presslinesimulation.HydraulicLifterBuilderList: Erases the object at the given position from the list.
erase(HydraulicLifterBuilder) - Method in interface nxopen.presslinesimulation.HydraulicLifterBuilderList: Erases the object from the list, but does not delete the object.
erase(HydraulicLifterBuilder, ObjectList.DeleteOption) - Method in interface nxopen.presslinesimulation.HydraulicLifterBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.presslinesimulation.LinearCamBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.presslinesimulation.LinearCamBuilderList: Erases the object at the given position from the list.
erase(LinearCamBuilder) - Method in interface nxopen.presslinesimulation.LinearCamBuilderList: Erases the object from the list, but does not delete the object.
erase(LinearCamBuilder, ObjectList.DeleteOption) - Method in interface nxopen.presslinesimulation.LinearCamBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.presslinesimulation.MachineAdjustmentBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.presslinesimulation.MachineAdjustmentBuilderList: Erases the object at the given position from the list.
erase(MachineAdjustmentBuilder) - Method in interface nxopen.presslinesimulation.MachineAdjustmentBuilderList: Erases the object from the list, but does not delete the object.
erase(MachineAdjustmentBuilder, ObjectList.DeleteOption) - Method in interface nxopen.presslinesimulation.MachineAdjustmentBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.presslinesimulation.MountPointBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.presslinesimulation.MountPointBuilderList: Erases the object at the given position from the list.
erase(MountPointBuilder) - Method in interface nxopen.presslinesimulation.MountPointBuilderList: Erases the object from the list, but does not delete the object.
erase(MountPointBuilder, ObjectList.DeleteOption) - Method in interface nxopen.presslinesimulation.MountPointBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.presslinesimulation.RotaryCamBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.presslinesimulation.RotaryCamBuilderList: Erases the object at the given position from the list.
erase(RotaryCamBuilder) - Method in interface nxopen.presslinesimulation.RotaryCamBuilderList: Erases the object from the list, but does not delete the object.
erase(RotaryCamBuilder, ObjectList.DeleteOption) - Method in interface nxopen.presslinesimulation.RotaryCamBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.presslinesimulation.UserMotionBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.presslinesimulation.UserMotionBuilderList: Erases the object at the given position from the list.
erase(UserMotionBuilder) - Method in interface nxopen.presslinesimulation.UserMotionBuilderList: Erases the object from the list, but does not delete the object.
erase(UserMotionBuilder, ObjectList.DeleteOption) - Method in interface nxopen.presslinesimulation.UserMotionBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.RegionPointList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.RegionPointList: Erases the object at the given position from the list.
erase(RegionPoint) - Method in interface nxopen.RegionPointList: Erases the object from the list, but does not delete the object.
erase(RegionPoint, ObjectList.DeleteOption) - Method in interface nxopen.RegionPointList: Erases the object from the list.
erase(int) - Method in interface nxopen.routing.RunItemsBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.routing.RunItemsBuilderList: Erases the object at the given position from the list.
erase(RunItemsBuilder) - Method in interface nxopen.routing.RunItemsBuilderList: Erases the object from the list, but does not delete the object.
erase(RunItemsBuilder, ObjectList.DeleteOption) - Method in interface nxopen.routing.RunItemsBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.ScCollectorList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.ScCollectorList: Erases the object at the given position from the list.
erase(ScCollector) - Method in interface nxopen.ScCollectorList: Erases the object from the list, but does not delete the object.
erase(ScCollector, ObjectList.DeleteOption) - Method in interface nxopen.ScCollectorList: Erases the object from the list.
erase(int) - Method in interface nxopen.SectionList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.SectionList: Erases the object at the given position from the list.
erase(Section) - Method in interface nxopen.SectionList: Erases the object from the list, but does not delete the object.
erase(Section, ObjectList.DeleteOption) - Method in interface nxopen.SectionList: Erases the object from the list.
erase(int) - Method in interface nxopen.sim.KinematicChainList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.sim.KinematicChainList: Erases the object at the given position from the list.
erase(KinematicChain) - Method in interface nxopen.sim.KinematicChainList: Erases the object from the list, but does not delete the object.
erase(KinematicChain, ObjectList.DeleteOption) - Method in interface nxopen.sim.KinematicChainList: Erases the object from the list.
erase(int) - Method in interface nxopen.sim.KinematicChannelBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.sim.KinematicChannelBuilderList: Erases the object at the given position from the list.
erase(KinematicChannelBuilder) - Method in interface nxopen.sim.KinematicChannelBuilderList: Erases the object from the list, but does not delete the object.
erase(KinematicChannelBuilder, ObjectList.DeleteOption) - Method in interface nxopen.sim.KinematicChannelBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.sim.KinematicJunctionBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.sim.KinematicJunctionBuilderList: Erases the object at the given position from the list.
erase(KinematicJunctionBuilder) - Method in interface nxopen.sim.KinematicJunctionBuilderList: Erases the object from the list, but does not delete the object.
erase(KinematicJunctionBuilder, ObjectList.DeleteOption) - Method in interface nxopen.sim.KinematicJunctionBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.TaggedObjectList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.TaggedObjectList: Erases the object at the given position from the list.
erase(TaggedObject) - Method in interface nxopen.TaggedObjectList: Erases the object from the list, but does not delete the object.
erase(TaggedObject, ObjectList.DeleteOption) - Method in interface nxopen.TaggedObjectList: Erases the object from the list.
erase(int) - Method in interface nxopen.tooling.SelectReuseLibraryListItemBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.tooling.SelectReuseLibraryListItemBuilderList: Erases the object at the given position from the list.
erase(SelectReuseLibraryListItemBuilder) - Method in interface nxopen.tooling.SelectReuseLibraryListItemBuilderList: Erases the object from the list, but does not delete the object.
erase(SelectReuseLibraryListItemBuilder, ObjectList.DeleteOption) - Method in interface nxopen.tooling.SelectReuseLibraryListItemBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.tooling.ShimInnerProfileSetBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.tooling.ShimInnerProfileSetBuilderList: Erases the object at the given position from the list.
erase(ShimInnerProfileSetBuilder) - Method in interface nxopen.tooling.ShimInnerProfileSetBuilderList: Erases the object from the list, but does not delete the object.
erase(ShimInnerProfileSetBuilder, ObjectList.DeleteOption) - Method in interface nxopen.tooling.ShimInnerProfileSetBuilderList: Erases the object from the list.
erase(DisplayableObject[]) - Method in interface nxopen.ViewDependentDisplayManager: Erases specified objects in a view.
erase(int) - Method in interface nxopen.weld.JointItemBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.weld.JointItemBuilderList: Erases the object at the given position from the list.
erase(JointItemBuilder) - Method in interface nxopen.weld.JointItemBuilderList: Erases the object from the list, but does not delete the object.
erase(JointItemBuilder, ObjectList.DeleteOption) - Method in interface nxopen.weld.JointItemBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.weld.JointmarkFaceSetsBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.weld.JointmarkFaceSetsBuilderList: Erases the object at the given position from the list.
erase(JointmarkFaceSetsBuilder) - Method in interface nxopen.weld.JointmarkFaceSetsBuilderList: Erases the object from the list, but does not delete the object.
erase(JointmarkFaceSetsBuilder, ObjectList.DeleteOption) - Method in interface nxopen.weld.JointmarkFaceSetsBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.weld.JointmarkGuideBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.weld.JointmarkGuideBuilderList: Erases the object at the given position from the list.
erase(JointmarkGuideBuilder) - Method in interface nxopen.weld.JointmarkGuideBuilderList: Erases the object from the list, but does not delete the object.
erase(JointmarkGuideBuilder, ObjectList.DeleteOption) - Method in interface nxopen.weld.JointmarkGuideBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.weld.JointmarkPointsBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.weld.JointmarkPointsBuilderList: Erases the object at the given position from the list.
erase(JointmarkPointsBuilder) - Method in interface nxopen.weld.JointmarkPointsBuilderList: Erases the object from the list, but does not delete the object.
erase(JointmarkPointsBuilder, ObjectList.DeleteOption) - Method in interface nxopen.weld.JointmarkPointsBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.weld.WeldBeadPathBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.weld.WeldBeadPathBuilderList: Erases the object at the given position from the list.
erase(WeldBeadPathBuilder) - Method in interface nxopen.weld.WeldBeadPathBuilderList: Erases the object from the list, but does not delete the object.
erase(WeldBeadPathBuilder, ObjectList.DeleteOption) - Method in interface nxopen.weld.WeldBeadPathBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.weld.WeldBeadSizeBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.weld.WeldBeadSizeBuilderList: Erases the object at the given position from the list.
erase(WeldBeadSizeBuilder) - Method in interface nxopen.weld.WeldBeadSizeBuilderList: Erases the object from the list, but does not delete the object.
erase(WeldBeadSizeBuilder, ObjectList.DeleteOption) - Method in interface nxopen.weld.WeldBeadSizeBuilderList: Erases the object from the list.
erase(int) - Method in interface nxopen.weld.WeldFillStripBuilderList: Erases the object from the list, but does not delete the object.
erase(int, ObjectList.DeleteOption) - Method in interface nxopen.weld.WeldFillStripBuilderList: Erases the object at the given position from the list.
erase(WeldFillStripBuilder) - Method in interface nxopen.weld.WeldFillStripBuilderList: Erases the object from the list, but does not delete the object.
erase(WeldFillStripBuilder, ObjectList.DeleteOption) - Method in interface nxopen.weld.WeldFillStripBuilderList: Erases the object from the list.
eraseAssemblyData(int) - Method in interface nxopen.tooling.FastenerAssy: Erases the assembly data
License requirements: None.
eraseCheckerNode(int) - Method in interface nxopen.validate.Validator: Removes a checker node.
ERASED_OBJECTS - Static variable in class nxopen.uf.UFView.CycleObjects
eraseFastenerAssembly(int, boolean, boolean, boolean, boolean, boolean, boolean, boolean, boolean) - Method in interface nxopen.tooling.FastenerAssy: Erases fastener assembly
License requirements: None.
eraseFastenerAssemblyData(int) - Method in interface nxopen.tooling.FastenerAssy: Erases the fastener assembly data, including the hole data and assembly data in the fastener setup data
License requirements: None.
eraseFastenerSetupData() - Method in interface nxopen.tooling.FastenerAssy: Erases the data (hole and assembly data) in fastener assembly
License requirements: None.
eraseNetlistHistory() - Method in interface nxopen.routing.RouteManager: Erases the Netlist content history from the work part
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
erasePartNode(int) - Method in interface nxopen.validate.Validator: Removes a part node
License requirements: None.
erasePlanarFaceData(Face) - Method in interface nxopen.tooling.EnlargeSurfaceBuilder: Erases the planar face data from builder according to face.
erasePointBoundaryMap(NXObject) - Method in interface nxopen.features.VarOffsetFaceBuilder: Erase the key value from region point - boundary map
License requirements: studio_free_form ("STUDIO FREE FORM")
.
erasePointDefinitionDisplay() - Method in interface nxopen.cam.InspectionCurveFeatureBuilder: Erases display of point definition data
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
erasePointDefinitionDisplay() - Method in interface nxopen.cam.InspectionSurfaceFeatureBuilder: Erases display of point definition data
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
erasePointLaminarMap(NXObject) - Method in interface nxopen.features.VarOffsetFaceBuilder: Erase the key value from region point - laminar edges map
License requirements: studio_free_form ("STUDIO FREE FORM")
.
eraseRange(int, int, int, int, int, int) - Method in interface nxopen.Spreadsheet: Clears the contents of the specified range
License requirements: None.
eraseStackArray(int, int, FastenerAssy.StackTypeMethod) - Method in interface nxopen.tooling.FastenerAssy: Erases stack array
License requirements: None.
eraseSurfaceData(Face) - Method in interface nxopen.tooling.EnlargeSurfaceBuilder: Erases the surface data from builder according to face.
eraseSxviewObjects(Tag, int, Tag[]) - Method in interface nxopen.uf.UFDraw: Refer to UF_DRAW_erase_sxview_objects for documentation.
ERECTION - Static variable in class nxopen.features.shipdesign.SeamBuilder.Types: Erection seam, used to define manufacturing block boundaries.
ERECTION_SEAM - Static variable in class nxopen.features.shipdesign.ShipDesignPreferencesBuilder.Types: Erection Seam type
erectionSplitSystem() - Method in interface nxopen.features.shipdesign.SeamBuilder: Returns the indication if the erection seams should split the system by default.
ERIGID - Static variable in class nxopen.cae.connections.ElementType: Rigid Elm
ERIGID_CONNECTOR - Static variable in class nxopen.cae.connections.ElementType: Rigid Connector
ERIGID_RIGID_CONNECTOR - Static variable in class nxopen.cae.connections.ElementType: Rigid Connector - Rigid Connector
errmessage - Variable in class nxopen.uf.UFModeling.AskFeatErrorData
errmsg - Variable in class nxopen.mechatronics.RuntimeNCBuilder.RunCSEData: Error message if CSE return false.
errnum - Variable in class nxopen.uf.UFModeling.AskFeatErrorData
errObject - Variable in class nxopen.uf.UFSf.MeshError
error(String) - Method in interface nxopen.cae.aerostructures.author.CalculationContext: Log an error message
License requirements: nx_masterfem ("Finite Element Modeling")
.
error(String, int, String) - Method in interface nxopen.cae.aerostructures.author.CalculationContext: Log an error message indexed by possibly empty failure mode and load case
License requirements: nx_masterfem ("Finite Element Modeling")
.
error(String, String, String) - Method in interface nxopen.cae.aerostructures.author.CalculationContext: Log an error message indexed by possibly empty failure mode and load case
License requirements: nx_masterfem ("Finite Element Modeling")
.
ERROR - Static variable in class nxopen.cae.aerostructures.MarginCalculationBuilder.CalculationStatus: error
ERROR - Static variable in class nxopen.cae.modelcheck.TestValueTypes.CriteriaType: reports as error if the check result failed with the criteria value
ERROR - Static variable in class nxopen.menubar.MenuBarManager.CallbackStatus: Inhibit further actions because a error condition was raised.
ERROR - Static variable in class nxopen.NXMessageBox.DialogType: Error
ERROR - Static variable in class nxopen.preferences.SessionPdm.MessagesInconsistentRevisionsType
ERROR - Static variable in class nxopen.sim.IsvControlPanelBuilder.VncMode: ERROR
ERROR - Static variable in class nxopen.Step242Importer.MessageEnum
error - Variable in class nxopen.uf.UFDrf.FrdimData
ERROR - Static variable in class nxopen.validate.RequirementBuilder.SeverityOptions
ERROR_BAD_STRING - Static variable in class nxopen.uf.UFConstants
ERROR_CAM_PREPRO_base - Static variable in class nxopen.uf.UFConstants
ERROR_CLEAR_base - Static variable in class nxopen.uf.UFConstants
ERROR_DURING_CUT - Static variable in class nxopen.gateway.CopyCutBuilder.Status: Error during the cut operation
ERROR_FACET_base - Static variable in class nxopen.uf.UFConstants
ERROR_FLTR_base - Static variable in class nxopen.uf.UFConstants
ERROR_LIMIT_ONLY - Static variable in class nxopen.cae.modelcheck.ElementQualitySetting.LimitValue: Only error criteria value could be defined
ERROR_MODL_base - Static variable in class nxopen.uf.UFConstants
ERROR_OK - Static variable in class nxopen.uf.UFConstants
ERROR_PART_base - Static variable in class nxopen.uf.UFConstants
ERROR_PX_BREP_base - Static variable in class nxopen.uf.UFConstants
ERROR_REFRESH_UNDONE - Static variable in class nxopen.routing.StockDataRefreshBuilder.RefreshStatus: Error encountered after partial update of stock definition; UNDO was performed to return to original state
ERROR_RLIST_base - Static variable in class nxopen.uf.UFConstants
ERROR_ROUTE_base - Static variable in class nxopen.uf.UFConstants
ERROR_SECSRF_FAILURE - Static variable in class nxopen.uf.UFConstants
ERROR_SMRT_MODEL_base - Static variable in class nxopen.uf.UFConstants
ERROR_SMSP_base - Static variable in class nxopen.uf.UFConstants
ERROR_STD_base - Static variable in class nxopen.uf.UFConstants
ERROR_TYPE - Static variable in class nxopen.uf.UFKf.Type
ERROR_UF_base - Static variable in class nxopen.uf.UFConstants
ERROR_UF_CAM_base - Static variable in class nxopen.uf.UFConstants
ERROR_UF_CLONE_base - Static variable in class nxopen.uf.UFConstants
ERROR_UF_CSYS_base - Static variable in class nxopen.uf.UFConstants
ERROR_UF_CURVE_base - Static variable in class nxopen.uf.UFConstants
ERROR_UF_DISP_base - Static variable in class nxopen.uf.UFConstants
ERROR_UF_DPUD_base - Static variable in class nxopen.uf.UFConstants
ERROR_UF_DRAW_base - Static variable in class nxopen.uf.UFConstants
ERROR_UF_DRF_base - Static variable in class nxopen.uf.UFConstants
ERROR_UF_DRPOS_base - Static variable in class nxopen.uf.UFConstants
ERROR_UF_GDT_base - Static variable in class nxopen.uf.UFConstants
ERROR_UF_MOTION_base - Static variable in class nxopen.uf.UFConstants
ERROR_UF_OBJ_base - Static variable in class nxopen.uf.UFConstants
ERROR_UF_OPER_base - Static variable in class nxopen.uf.UFConstants
ERROR_UF_OPER_INVALID_PARAMETER - Static variable in class nxopen.uf.UFConstants
ERROR_UF_OPER_NOT_IMPLEMENTED - Static variable in class nxopen.uf.UFConstants
ERROR_UF_OPER_WRONG_OPER_TY - Static variable in class nxopen.uf.UFConstants
ERROR_UF_PATH_base - Static variable in class nxopen.uf.UFConstants
ERROR_UF_PLOT_base - Static variable in class nxopen.uf.UFConstants
ERROR_UF_SFEM_base - Static variable in class nxopen.uf.UFConstants
ERROR_UF_SMD_base - Static variable in class nxopen.uf.UFConstants
ERROR_UF_SO_base - Static variable in class nxopen.uf.UFConstants
ERROR_UF_STD_base - Static variable in class nxopen.uf.UFConstants
ERROR_UF_STD_stl_base - Static variable in class nxopen.uf.UFConstants
ERROR_UF_SURF_REG_base - Static variable in class nxopen.uf.UFConstants
ERROR_UF_TABNOT_base - Static variable in class nxopen.uf.UFConstants
ERROR_UF_VIEW_base - Static variable in class nxopen.uf.UFConstants
ERROR_UF_WAVE_base - Static variable in class nxopen.uf.UFConstants
ERROR_UF_WEIGHT_base - Static variable in class nxopen.uf.UFConstants
ERROR_UGMGR_base - Static variable in class nxopen.uf.UFConstants
errorCode - Variable in class nxopen.cam.CAMObject.ErrorItem
errorCode() - Method in interface nxopen.drafting.DrawingAutomationWizard: Returns the error code to be returned from the callback
License requirements: None.
errorCode() - Method in interface nxopen.ErrorInfo: Returns a number that represents what error occurred
License requirements: None.
errorCode() - Method in interface nxopen.features.CustomFeatureEvent: Returns the error occured during the event
License requirements: solid_modeling ("SOLIDS MODELING")
.
errorcode - Variable in class nxopen.features.shipdesign.MirrorShipStructureBuilder.SortComponentByInterPartDependencyData
errorCode() - Method in exception nxopen.NXException: Gets the error code associated with this exception
errorCode - Variable in class nxopen.uf.UFStd.StlError
errorCode() - Method in interface nxopen.weld.EdgePrepBuilder: Returns the error code for the first welding joint curve that could not be processed.
errorCodes - Variable in class nxopen.cae.CaeGroupCollection.CreateAutoGroupsData: list of generated error codes for each auto group type
errorCount - Variable in class nxopen.cae.modelcheck.ElementQualityCheckResults.TestSummary: the count of elements with error results
errorHndl() - Method in interface nxopen.cae.ResultProbeBuilder: Returns the error handel value
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
errorIfNoCo - Variable in class nxopen.uf.UFClone.CheckinData
ErrorInfo - Interface in nxopen: Contains information about an error that occurred .
errorInfo - Variable in class nxopen.uf.UFStd.PutSheetsInStlFileData
errorInfo - Variable in class nxopen.uf.UFStd.PutSolidInStlFileData
ErrorItem() - Constructor for class nxopen.cam.CAMObject.ErrorItem
ErrorItem(CAMObject, int) - Constructor for class nxopen.cam.CAMObject.ErrorItem: Constructor for the ErrorItem object.
errorLevel() - Method in interface nxopen.visualreporting.GroupLabel: Returns the Error Level of this GroupLabel .
errorLimit() - Method in interface nxopen.drawings.ConversionProcessSettingsBuilder: Returns the error limit integer
License requirements: None.
errorList - Variable in class nxopen.assemblies.ComponentAssembly.CheckoutAllModifiedObjectsData: Any errors that occurred during checking out of objects
errorList - Variable in class nxopen.assemblies.ComponentAssembly.RestructureComponentsData: Any errors that occurred during the restructure
ErrorList - Interface in nxopen: Represents a list of errors .
errorList - Variable in class nxopen.routing.electrical.ElectricalStockDeviceCollection.AutoRouteConnectionsData: Any errors that occurred during Automatic Routing.
errorList - Variable in class nxopen.uf.UFPart.SaveAllData
errorList - Variable in class nxopen.uf.UFPart.UpdateFamilyInstanceData
errorList() - Method in interface nxopen.Update: Returns the list of all the errors that the Update module has encountered since the last time that the list was cleared.
errorMessage - Variable in class nxopen.Part.FeatureUpdateStatus: error message
errormessage - Variable in class nxopen.shapesearch.ShapeSearchBuilder.ExecuteSearchData: Search error message
errorMessageDisplay() - Method in interface nxopen.STLCreator: Returns the Error Message Display - if set to true will will display error messages
License requirements: None.
ErrorMessageHandler - Interface in nxopen.pdm: Represents the class that contains ErrorObjects and Failed Logical Objects.
errorMessages - Variable in class nxopen.ExpressionCollection.ImportFromFileData: translated list of error messages
errorObject() - Method in interface nxopen.ErrorInfo: Returns the object for which the error occurred.
errorObjectDescription() - Method in interface nxopen.ErrorInfo: Returns a description of the object for which the error occurred
License requirements: None.
errorReduction() - Method in interface nxopen.mechatronics.PreferencesBuilder: Deprecated.
Deprecated in NX9.0.0. Use PreferencesBuilder.errorReductionExpression() instead
errorReductionExpression() - Method in interface nxopen.mechatronics.PreferencesBuilder: Returns the Error Reduction Expression
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
errors - Variable in class nxopen.assemblies.ComponentAssembly.CreateIsolateViewWithComponentsData: list of errors encountered during components shown in isolate view
errors - Variable in class nxopen.assemblies.ComponentAssembly.HideComponentsInIsolateViewData: list of errors encountered during components shown in isolate view
errors - Variable in class nxopen.assemblies.ComponentAssembly.ShowComponentsInIsolateViewData: list of errors encountered during components shown in isolate view
errorStatus - Variable in class nxopen.uf.UFAssem.AddPartToAssemblyData
errorStatus - Variable in class nxopen.uf.UFPart.OpenComponentAsData
errorStatus - Variable in class nxopen.uf.UFPart.OpenData
errorStatus - Variable in class nxopen.uf.UFPart.OpenQuietData
errorStatus - Variable in class nxopen.uf.UFPart.OpenSingleComponentAsData
ERRORSTRUCT - Static variable in class nxopen.ame.PlcDataType
errortable - Variable in class nxopen.facet.FacetedBodyCollection.CreateFacetBodyData
errorUnlessCommentsMatch - Variable in class nxopen.uf.UFClone.AskCiCommentCheckingData
errorUnlessCommentsMatch - Variable in class nxopen.uf.UFClone.AskDefCiCommentCheckingData
errType - Variable in class nxopen.uf.UFSf.MeshError
ESHEET - Static variable in class nxopen.PrintBuilder.PaperSize: E Sheet, 34- by 44-inches
ESKD - Static variable in class nxopen.annotations.SurfaceFinishBuilder.StandardType: ESKD
ESKD - Static variable in class nxopen.annotations.SurfaceFinishStandard: ESKD
ESKD - Static variable in class nxopen.annotations.WeldStandard: ESKD standard
ESKD_SIMPLIFIED - Static variable in class nxopen.drawings.CustomViewSettingsBuilder.ThreadStandards
ESKD_STANDARD - Static variable in class nxopen.drawings.SectionLineStyleBuilder.StandardStyle: Deprecated.
eSlotType - Variable in class nxopen.mechatronics.ExpressionBlockBuilder.Slot: Slot type that indicate the data structure is used for
ESPIDER - Static variable in class nxopen.cae.connections.ElementType: Spider
ESPRING - Static variable in class nxopen.cae.connections.ElementType: Spring Elm
essentialThinning() - Method in interface nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder: Returns the essential thinning
License requirements: None.
estabCompProps(Tag, double, boolean, UFWeight.UnitsType) - Method in interface nxopen.uf.UFWeight: Refer to UF_WEIGHT_estab_comp_props for documentation.
estabCompProps1(Tag, double, boolean, UFWeight.UnitsType) - Method in interface nxopen.uf.UFWeight: Refer to UF_WEIGHT_estab_comp_props1 for documentation.
EstabCompProps1Data() - Constructor for class nxopen.uf.UFWeight.EstabCompProps1Data
EstabCompPropsData() - Constructor for class nxopen.uf.UFWeight.EstabCompPropsData
ESTABLISH_OVERRIDE - Static variable in class nxopen.uf.UFAssem.LevelOption
establishChildren(NXObject) - Method in interface nxopen.ame.AMEManager: Establish the children
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
establishEvaluator() - Method in interface nxopen.ame.BaseEvaluatorBuilder: Establishes the evaluator
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
establishFamilyInstance(String) - Method in interface nxopen.partfamily.TemplateManager: Creates a part family member if it doesn't exist on disk.
establishIsolatedPositionOverride(Component, Arrangement) - Method in interface nxopen.assemblies.Component: Ensures there is an isolated positioning override for the Component in the given part of the given parent.
establishMember(int) - Method in interface nxopen.PartFamilyManager: Deprecated.
Deprecated in NX9.0.0. Use TemplateManager.establishFamilyInstance(java.lang.String)
establishNetwork() - Method in interface nxopen.positioning.Positioner: Establishes a Network in the positioner.
establishNewProject(Part) - Method in interface nxopen.ame.ApplicationBuilder: Create a new project for workset part.
establishPathArrangement() - Method in interface nxopen.routing.electrical.PathArrangementBuilder: Retrieves the Path Arrangement object based on the data stored in the builder.
establishPositionOverride(Component) - Method in interface nxopen.assemblies.Component: Ensures there is a positioning override on component in the given part of the given parent.
establishProject(String) - Method in interface nxopen.ame.ApplicationBuilder: Set collaborative design
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
estabPartProps(Tag, double, boolean, UFWeight.UnitsType) - Method in interface nxopen.uf.UFWeight: Refer to UF_WEIGHT_estab_part_props for documentation.
estabPartProps1(Tag, double, boolean, UFWeight.UnitsType) - Method in interface nxopen.uf.UFWeight: Refer to UF_WEIGHT_estab_part_props1 for documentation.
EstabPartProps1Data() - Constructor for class nxopen.uf.UFWeight.EstabPartProps1Data
EstabPartPropsData() - Constructor for class nxopen.uf.UFWeight.EstabPartPropsData
estabSolidProps(Tag, double, UFWeight.UnitsType) - Method in interface nxopen.uf.UFWeight: Refer to UF_WEIGHT_estab_solid_props for documentation.
eType - Variable in class nxopen.uf.UFSf.AskNodeData
EU - Static variable in class nxopen.features.vehicledesign.PendulumPlacementBuilder.PendulumProfileType
EULER - Static variable in class nxopen.cae.Post.IntegrationScheme
EULER - Static variable in class nxopen.mechatronics.InclinometerBuilder.OutputAngleType: Euler
EULER_ANGLES - Static variable in class nxopen.motion.MechanismExport.PositionOrientationFormat: Origin and Euler angles
EULER_ONE - Static variable in class nxopen.uf.UFMotion.DispAngle
EULER_PARAMETERS - Static variable in class nxopen.motion.MechanismExport.PositionOrientationFormat: Origin and Euler parameters
EULER_THREE - Static variable in class nxopen.uf.UFMotion.DispAngle
EULER_TWO - Static variable in class nxopen.uf.UFMotion.DispAngle
EUROPE200397EC_ECER4602 - Static variable in class nxopen.features.vehicledesign.MirrorCertificationBuilder.InsideStandardsType: Represents Europe : 2003/97/EC - ECE R46.02 standard
EUROPE71127EU_ECER4601SUPERCEDED - Static variable in class nxopen.features.vehicledesign.MirrorCertificationBuilder.DriverSideStandardsType: Represents Europe : 71/127/EU - ECE R46.01 (Superceded ) standard
EUROPE_M1N1CLASSIII_MIRROR200397EC_ECER4602 - Static variable in class nxopen.features.vehicledesign.MirrorCertificationBuilder.DriverSideStandardsType: Represents Europe (M1/N1_Class III Mirror) : 2003/97/EC - ECE R46.02 standard
EUROPE_M1N1CLASSIII_MIRROR200397EC_ECER4602 - Static variable in class nxopen.features.vehicledesign.MirrorCertificationBuilder.PassengerSideStandardsType: Represents Europe (M1/N1_Class III Mirror) : 2003/97/EC - ECE R46.02 standard
EUROPE_M1N1ONLY71127EU_ECER4601SUPERCEDED - Static variable in class nxopen.features.vehicledesign.MirrorCertificationBuilder.PassengerSideStandardsType: Represents Europe (M1/N1 only) : 71/127/EU - ECE R46.01 (Superceded ) standard
EUROPE_NOT_M1N171127EU_ECER4601SUPERCEDED - Static variable in class nxopen.features.vehicledesign.MirrorCertificationBuilder.PassengerSideStandardsType: Represents Europe (Not M1/N1) : 71/127/EU - ECE R46.01 : (Superceded ) standard
EUROPEAN - Static variable in class nxopen.features.vehicledesign.PedestrianProtectionBuilder.StandardType: European standard
eval() - Method in interface nxopen.UFSession
evalData - Variable in class nxopen.uf.UFDraw.AskTabularNoteParamsData
evalData - Variable in class nxopen.uf.UFDraw.ReadTabnotCellData
evalExp(String) - Method in interface nxopen.uf.UFModlGeneral: Refer to UF_MODL_eval_exp for documentation.
evalGrid(Tag, double, Tag) - Method in interface nxopen.uf.UFScop: Refer to UF_SCOP_eval_grid for documentation.
evalInstanceIntent(Tag, boolean) - Method in interface nxopen.uf.UFAssem: Refer to UF_ASSEM_eval_instance_intent for documentation.
EvalInstanceIntentData() - Constructor for class nxopen.uf.UFAssem.EvalInstanceIntentData
evalsf() - Method in interface nxopen.UFSession
evalSurface(Tag, UFCam.GeomType, Tag, double[]) - Method in interface nxopen.uf.UFCamgeom: Refer to UF_CAMGEOM_eval_surface for documentation.
evalText - Variable in class nxopen.uf.UFDraw.TabnotCellEvalData
evalTrimAngles(Tag[], int, Tag[], int, double[], double) - Method in interface nxopen.uf.UFSmd: Refer to UF_SMD_eval_trim_angles for documentation.
EvalTrimAnglesData() - Constructor for class nxopen.uf.UFSmd.EvalTrimAnglesData
EVALUATE - Static variable in class nxopen.AutomaticTraceline.ModeOption: Evaluate which mode to use
evaluate(double) - Method in interface nxopen.cae.SimConditionSequence: Evaluate all SimConditionParam related expressions at a given time.
evaluate(double, boolean) - Method in interface nxopen.cae.SimConditionSequence: Convenience overloaded method provided to control if an update will be requested after SimConditionSequence has been evaluated.
evaluate() - Method in interface nxopen.features.BridgeCurveBuilderEx: Evaluates the curve
License requirements: features_modeling ("FEATURES MODELING")
.
evaluate() - Method in interface nxopen.features.CircularBlendCurveBuilder: Evaluates the circular blend curve
License requirements: solid_modeling ("SOLIDS MODELING")
.
evaluate() - Method in interface nxopen.features.FitCurveBuilder: Evaluates the curve
License requirements: solid_modeling ("SOLIDS MODELING")
.
evaluate() - Method in interface nxopen.features.GeneralConicBuilder: Evaluates the curve.
evaluate() - Method in interface nxopen.features.HelixBuilder: Evaluates the curve
License requirements: features_modeling ("FEATURES MODELING")
.
evaluate() - Method in interface nxopen.features.PolylineBuilder: Evaluates the polyline
License requirements: features_modeling ("FEATURES MODELING")
.
evaluate() - Method in interface nxopen.features.SpineCurveBuilder: Evaluates the curve
License requirements: solid_modeling ("SOLIDS MODELING")
.
evaluate() - Method in interface nxopen.features.StudioSplineBuilderEx: Evaluates the spline
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
evaluate(FieldVariable) - Method in interface nxopen.fields.FieldEvaluator: Evaluate the Field at the specified independent variable FieldVariable values and return the values for the specified dependent variable.
evaluate() - Method in interface nxopen.IPlane: Evaluates the plane
License requirements: None.
evaluate(String) - Method in interface nxopen.RuleManager: Evaluate a rule and return its value.
evaluate() - Method in interface nxopen.SmartObject: Evaluate a smart object.
evaluate(UFVariant, int, double) - Method in interface nxopen.uf.UFEval: Refer to UF_EVAL_evaluate for documentation.
evaluate(UFVariant, int, double[]) - Method in interface nxopen.uf.UFEvalsf: Refer to UF_EVALSF_evaluate for documentation.
evaluate() - Method in interface nxopen.Validation: Manually validate
License requirements: None.
evaluateAndAskOutputEntities() - Method in interface nxopen.Section: Recalculates section collection.
evaluateAnyAsString(String) - Method in interface nxopen.RuleManager: Evaluate a rule and return its value as a string.
evaluateAsString(String) - Method in interface nxopen.RuleManager: Evaluate a rule and return its value as a string.
evaluateCell(int, int, int) - Method in interface nxopen.Spreadsheet: Returns the evaluated value of a cell.
evaluateClosestPoint(UFVariant, double[]) - Method in interface nxopen.uf.UFEval: Refer to UF_EVAL_evaluate_closest_point for documentation.
EvaluateClosestPointData() - Constructor for class nxopen.uf.UFEval.EvaluateClosestPointData
evaluateCsd(CsdEvaluationSetting) - Method in interface nxopen.cae.responsesimulation.RSEvent: Performs evaluation for CSD.
evaluateCurve(Tag, double, int) - Method in interface nxopen.uf.UFCurve: Refer to UF_CURVE_evaluate_curve for documentation.
evaluateCurve(Tag, double, int) - Method in interface nxopen.uf.UFModlGeneral: Refer to UF_MODL_evaluate_curve for documentation.
EvaluateData() - Constructor for class nxopen.uf.UFEval.EvaluateData
evaluatedValueX() - Method in interface nxopen.diagramming.LocationBuilder: Returns the evaluated X coordinate value that is the result calculated by the input percentage and offset.
evaluatedValueY() - Method in interface nxopen.diagramming.LocationBuilder: Returns the evaluated Y coordinate value that is the result calculated by input percentage and offset.
evaluateElementalFunctionResponse(ElementalFunctionEvaluationSetting) - Method in interface nxopen.cae.responsesimulation.RSEvent: Performs evaluation for elemental function response.
evaluateFace(Tag, int, double[]) - Method in interface nxopen.uf.UFModeling: Refer to UF_MODL_evaluate_face for documentation.
evaluateFilter(Tag, Tag) - Method in interface nxopen.uf.UFFltr: Refer to UF_FLTR_evaluate_filter for documentation.
evaluateFrf(FrfEvaluationSetting) - Method in interface nxopen.cae.responsesimulation.Solution: Performs evaluation for FRF.
evaluateIntentData(UFFam.IntentData) - Method in interface nxopen.uf.UFFam: Refer to UF_FAM_evaluate_intent_data for documentation.
EvaluateIntentData() - Constructor for class nxopen.uf.UFFam.EvaluateIntentData
evaluateLcrResults(LcrResultsEvaluationSetting) - Method in interface nxopen.cae.responsesimulation.RSEvent: Performs evaluation for LCR results.
evaluateModalFunctionResponse() - Method in interface nxopen.cae.responsesimulation.RSEvent: Performs evaluation for modal function response.
evaluateModalResponse() - Method in interface nxopen.cae.responsesimulation.RSEvent: Performs evaluation for modal response.
evaluateNodalFunctionResponse(NodalFunctionEvaluationSetting) - Method in interface nxopen.cae.responsesimulation.RSEvent: Performs evaluation for nodal function response.
evaluateOffset() - Method in interface nxopen.SketchOffsetBuilder: This function will solve the offset constraint to update it based on the new data set in the builder
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
evaluateOneSketch(double) - Method in interface nxopen.SketchEvaluator: Work-horse method that evaluates the master section and its sketch on path at a specific path location.
evaluatePath(Section) - Method in interface nxopen.features.DatumAxisBuilder: Evaluate the path.
evaluatePath(NXObject[]) - Method in interface nxopen.mechatronics.CurveOnCurveJointBuilder: Evaluate the path.
evaluatePath(NXObject[]) - Method in interface nxopen.mechatronics.PathConstraintJointBuilder: Evaluate the composited path with the curves.
evaluatePath(NXObject[]) - Method in interface nxopen.mechatronics.PointOnCurveJointBuilder: Evaluate the path.
evaluatePattern() - Method in interface nxopen.SketchPatternBuilder: This function will solve the pattern constraint to update it based on the new data set in the builder
License requirements: None.
evaluatePeakValueResults(PeakValueEvaluationSetting) - Method in interface nxopen.cae.responsesimulation.RSEvent: Performs evaluation for peak value results.
evaluatePointInformation(Point3d) - Method in interface nxopen.features.shipdesign.ShipCoordinatesBuilder: Evaluates the point per position and and sets them into ShipCoordinatesBuilder builder.
evaluateProfileCutoutParameters(TaggedObject, TaggedObject) - Method in interface nxopen.features.shipdesign.ProfileCutoutBuilder: Updates the parameters in profile cutout builder using parameters rules.
evaluateResponseResults(ResponseResultsEvaluationSetting) - Method in interface nxopen.cae.responsesimulation.RSEvent: Performs evaluation for response results.
evaluateRmsResults(RmsResultsEvaluationSetting) - Method in interface nxopen.cae.responsesimulation.RSEvent: Perfroms evaluation for RMS results.
evaluateRule(String) - Method in interface nxopen.uf.UFKf: Refer to UF_KF_evaluate_rule for documentation.
evaluateRulesAndUpdate() - Method in interface nxopen.annotations.Table: Evalute rules and update tabular note
License requirements: None.
evaluateRuleToString(String) - Method in interface nxopen.uf.UFKf: Refer to UF_KF_evaluate_rule_to_string for documentation.
evaluateSensorResponse() - Method in interface nxopen.cae.responsesimulation.RSEvent: Performs evaluation for sensor response.
evaluateSensorResponse(SensorEvaluationSetting) - Method in interface nxopen.cae.responsesimulation.RSEvent: Performs evaluation for sensor response.
evaluateSinglePortInformation(int) - Method in interface nxopen.features.shipdesign.ShipCoordinatesBuilder: Evaluates the Nth ports information and sets them into ShipCoordinatesBuilder builder, the index starts from 1 and should be equal or less than number of ports.
evaluateStrainGageResponse(StrainGageEvaluationSetting) - Method in interface nxopen.cae.responsesimulation.RSEvent: Performs evaluation for strain gage response.
evaluateStrengthResults(StrengthResultsEvaluationSetting) - Method in interface nxopen.cae.responsesimulation.RSEvent: Performs evaluation for strength results.
evaluateTransmissibility(TransmissibilityEvaluationSetting) - Method in interface nxopen.cae.responsesimulation.Solution: Performs evaluation for transimissibility.
evaluateUnitVectors(UFVariant, double) - Method in interface nxopen.uf.UFEval: Refer to UF_EVAL_evaluate_unit_vectors for documentation.
EvaluateUnitVectorsData() - Constructor for class nxopen.uf.UFEval.EvaluateUnitVectorsData
evaluateWriteState(Tag) - Method in interface nxopen.uf.UFPart: Refer to UF_PART_evaluate_write_state for documentation.
evaluationFrequency() - Method in interface nxopen.cae.MechanicalLoadSumBuilder: Returns the evaluation frequency
License requirements: None.
evaluationMethod() - Method in interface nxopen.cae.responsesimulation.RmsResultsEvaluationSettingBuilder: Returns the evaluation method for RMS
License requirements: nx_response_anlys ("NX Response Analysis")
.
evaluationMethodOption() - Method in interface nxopen.cae.responsesimulation.CombinationEvaluationOptions: Returns the calculation method
License requirements: nx_response_anlys ("NX Response Analysis")
.
evaluationMode() - Method in interface nxopen.geometricanalysis.GapFlushnessBuilder: Returns the evaluation Method
License requirements: solid_modeling ("SOLIDS MODELING")
.
EvaluationParameters - Interface in nxopen.cae.responsesimulation: Represents the evaluation parameters for a response simulation meta solution
Not support KF.
EvaluationParameters.AnalysisIntegrationMethod - Class in nxopen.cae.responsesimulation: the integration method used for transient analysis
evaluationPlane() - Method in interface nxopen.drawings.AssociativeAngleBuilder: Returns the evaluation plane type
License requirements: None.
evaluationPoint() - Method in interface nxopen.features.shipdesign.RollingLineBuilder: Returns the selected point for evaluation when RollingLineBuilder.StartEvaluationTypes is RollingLineBuilder.StartEvaluationTypes.NEW_POINT .
evaluationPoint() - Method in interface nxopen.geometricanalysis.GapFlushnessBuilder: Returns the evaluation point
License requirements: solid_modeling ("SOLIDS MODELING")
.
evaluationpoint - Variable in class nxopen.weld.WeldBeadPathBuilder.UpdatePathData: Point that reference vectors are computed at
evaluationPointOption() - Method in interface nxopen.features.shipdesign.RollingLineBuilder: Returns the option on how to seed the starting point for the evaluation.
evaluationProperty() - Method in interface nxopen.cae.responsesimulation.ModalResultsEvaluationSettingBuilder: Returns the frequency setting
License requirements: nx_response_anlys ("NX Response Analysis")
.
EvaluationResultType - Class in nxopen.cae.responsesimulation: Specifies the evaluation result type
EvaluationSetting - Interface in nxopen.cae.responsesimulation: Represents the abstract class of all evaluation setting classes.
EvaluationSettingBuilder - Interface in nxopen.cae.responsesimulation: Represents the abstract builder class of all evaluation setting classes.
EvaluationSettingManager - Interface in nxopen.cae.responsesimulation: Represents the manager of all evaluation setting objects.
evaluationSettingManager() - Method in interface nxopen.cae.responsesimulation.Manager: Returns the Response Dynamics evaluation data manager belonging to this sim part .
evaluationTemparature() - Method in interface nxopen.cae.SolidPropertyCheckBuilder: Returns the output temperature option in C
License requirements: None.
evaluationTime() - Method in interface nxopen.cae.MechanicalLoadSumBuilder: Returns the evaluation time
License requirements: None.
evaluationType() - Method in interface nxopen.cae.responsesimulation.FrequencyDefinition: Returns the method to define frequency
License requirements: nx_response_anlys ("NX Response Analysis")
.
evaluationType() - Method in interface nxopen.geometricanalysis.GapFlushnessBuilder: Returns the evaluation type
License requirements: solid_modeling ("SOLIDS MODELING")
.
EvaluatorCopyToBuilder - Interface in nxopen.ame: Copies evaluator and its dependents from one engineering object to another
To create a new instance of this class, use AMEManager.createEvaluatorCopyToBuilder(nxopen.Part)

Created in NX12.0.0
evalutionErrorsOption() - Method in interface nxopen.cae.PostGraphBuilder: Returns the error handling option when there are evaluation errors on selected entities or path
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
EVEN - Static variable in class nxopen.cae.AfuData.AbscissaType: The abscissa value is even and calculated by increment
EVEN - Static variable in class nxopen.cae.Post.Abcissa
EVEN - Static variable in class nxopen.cae.responsesimulation.RSEvent.SpacingType
EVEN_DISTRIBUTION - Static variable in class nxopen.features.shipdesign.EdgeCutBuilder.ArraySpacing: Cuts will automatically be spaced evenly along the length of the guide
EVEN_DISTRIBUTION - Static variable in class nxopen.features.shipdesign.VentilationHoles2Builder.ArraySpacing: Holes will automatically be spaced evenly along the length of the guide
EVEN_FIT - Static variable in class nxopen.features.shipdesign.InverseBendingLinesBuilder.MethodType: Even Fit.
EvenComplexData() - Constructor for class nxopen.cae.ftk.ArrayRecord2DEven.EvenComplexData
EvenData() - Constructor for class nxopen.cae.AfuData.EvenData
EvenRealData() - Constructor for class nxopen.cae.ftk.ArrayRecord2DEven.EvenRealData
event() - Method in interface nxopen.cae.DurSpecialistLoadProviderBuilder: Returns the event.
EVENT - Static variable in class nxopen.sim.IsvControlPanelBuilder.SingleStepType: Event
EVENT - Static variable in class nxopen.sim.SimDebugBuilder.TraceType: Trace Event
EVENT_ANY - Static variable in class nxopen.ame.PlcDataType
EVENT_ATT - Static variable in class nxopen.ame.PlcDataType
EVENT_HWINT - Static variable in class nxopen.ame.PlcDataType
eventCondition() - Method in interface nxopen.motion.SignalChartListItem: Returns the event condition
License requirements: nx_motion_motor ("NX Motion Motor")
.
eventDamage() - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder: Returns the event damage.
eventDamage() - Method in interface nxopen.cae.DurabilityRandomFatigueBuilder: Returns the event damage.
eventDamage() - Method in interface nxopen.cae.DurabilityResultsReportBuilder: Returns the event damage toggle
License requirements: None.
eventDamageDirection() - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder: Returns the event damage direction.
eventFlag() - Method in interface nxopen.cam.LaserControlPoint: Returns the flag whether the control event is available
License requirements: None.
eventLife() - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder: Returns the event life.
eventLife() - Method in interface nxopen.cae.DurabilityRandomFatigueBuilder: Returns the event life.
eventLife() - Method in interface nxopen.cae.DurabilityResultsReportBuilder: Returns the event life toggle
License requirements: None.
eventName() - Method in interface nxopen.cae.DurabilityEventBuilder: Returns the event name.
eventName() - Method in interface nxopen.cae.LaminateRandomEventBuilder: Deprecated.
Deprecated in NX10.0.0. Use LaminateDynamicEventBuilder.dynamicEventName() instead.
eventReason() - Method in interface nxopen.userdefinedobjects.UserDefinedEvent: Returns the reason we fired this event.
events() - Method in interface nxopen.cae.DurabilityMetaSolution: The event collection for this meta solution.
events() - Method in interface nxopen.cae.responsesimulation.Manager: Returns the Response Dynamics event collection belonging to this sim part .
events() - Method in interface nxopen.cam.BoundaryTurnMemberSet: Returns the post events
License requirements: None.
eventType() - Method in interface nxopen.cae.responsesimulation.RSEventBuilder: Returns the event type
License requirements: nx_response_anlys ("NX Response Analysis")
.
eventType - Variable in class nxopen.cam.CamOperationCircularMotionDataType
eventType - Variable in class nxopen.cam.CamOperationHelicalMotionDataType
eventType - Variable in class nxopen.cam.CamOperationLinearMotionDataType
EVERY_CHANGE - Static variable in class nxopen.Validation.UpdateTime: Every update when the input was changed
EVERYTHING - Static variable in class nxopen.display.PlanarShipGridBuilder.IntersectOption: all objects will be searched for intersections with the plane
EWDraftingBuilder - Interface in nxopen.tooling: Represents the drafting builder which is used to create electrode drafting.
EWDraftingBuilder.CNCTemplateOption - Class in nxopen.tooling: the template option of cnc sheet type
EWDraftingBuilder.DrawingOption - Class in nxopen.tooling: the drawing type
EWDraftingBuilder.EDMTemplateOption - Class in nxopen.tooling: the template option of edm sheet type
EWDraftingBuilder.ModeOption - Class in nxopen.tooling: the drafting mode option
EWDraftingBuilder.NameOption - Class in nxopen.tooling: the drawing sheet name option
EWMultiPositionBuilder - Interface in nxopen.tooling: Represents the multiple position builder which is used to get transformed electrode heads together.
EWMultiPositionCollection - Interface in nxopen.tooling: Creates EWMultiPosition builder collection
To obtain an instance of this class, refer to ToolingManager

Created in NX7.5.0
ewmultiPositions() - Method in interface nxopen.tooling.ToolingManager: Returns the EWMultiPositionCollection instance belonging to this part .
EXACT - Static variable in class nxopen.assemblies.ClearanceAnalysisBuilder.CalculationMethodType
EXACT - Static variable in class nxopen.assemblies.ClearanceSet.ReanalyzePairCalculationMethod
EXACT - Static variable in class nxopen.assemblies.Component.RepresentationMode: The component's solid bodies are displayed with the exact data
EXACT - Static variable in class nxopen.cam.StepoverBuilder.StepoverTypes: Exact
EXACT - Static variable in class nxopen.die.CompensateRoughDataBuilder.ApproximationType: Perform no approximation.
EXACT - Static variable in class nxopen.drawings.ViewCreationWizardBuilder.ViewRepresentations: View representation mode Exact
EXACT - Static variable in class nxopen.features.MatchEdgeBuilder.MatchExact: Match exact
EXACT - Static variable in class nxopen.formboard.LayoutLengthOptions.RoundingMethod: Lengths are unmodified.
EXACT - Static variable in class nxopen.motion.LmsSolverProperty.StaticJacobianTypes
EXACT - Static variable in class nxopen.preferences.GeneralViewRepresentationOption: Exact
EXACT - Static variable in class nxopen.SpreadsheetManager.LookupMode: Requires an exact match
EXACT_IF_LOADED - Static variable in class nxopen.assemblies.ClearanceSet.ReanalyzePairCalculationMethod
EXACT_MIRROR - Static variable in class nxopen.LinkedMirrorPartBuilder.MirrorPartTypeOption
EXACTIF_LOADED - Static variable in class nxopen.assemblies.ClearanceAnalysisBuilder.CalculationMethodType
exactSheetbodyOption() - Method in interface nxopen.tooling.DieDesDrawDieBuilder: Returns the option to indicate whether to use exact sheet body.
exactSheetbodyOption() - Method in interface nxopen.tooling.DieDesDrawPunchBuilder: Returns the option to indicate whether to use exact sheet metal.
examine() - Method in interface nxopen.features.shipdesign.ExamineSteelFeatureBuilder: Examines the selected objects.
examine() - Method in interface nxopen.geometricanalysis.ExamineGeometry: Examines the geometry.
ExamineGeometry - Interface in nxopen.geometricanalysis: Represents the Examine Geometry class
To create a new instance of this class, use AnalysisManager.createExamineGeometryObject()

Created in NX5.0.0
ExamineGeometry.Check - Class in nxopen.geometricanalysis: Types of checks
ExamineSteelFeatureBuilder - Interface in nxopen.features.shipdesign: Represents the examine steel feature builder to examine steel feature.
ExamineSteelFeatureBuilderCheck - Class in nxopen.features.shipdesign: Represents the object types to examine.
ExamineSteelFeatureBuilderResult - Class in nxopen.features.shipdesign: Represents the status of examining result.
exampleDesc() - Method in interface nxopen.mechatronics.FunctionObjectBuilder: Returns the example description
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
EXCEEDED_MAXIMUM_402 - Static variable in class nxopen.uf.UFConstants
EXCEL - Static variable in class nxopen.pdm.FileManagement.FileType
EXCEL_X - Static variable in class nxopen.pdm.FileManagement.FileType
EXCEPTION - Static variable in class nxopen.cae.modelcheck.TestValueTypes.Result: indicates there is an exception thrown during the checking
EXCEPTION - Static variable in class nxopen.report.AutomationLogger.MessageType: Exception message
exceptions - Variable in class nxopen.uf.UFWeight.EstabCompProps1Data
exceptions - Variable in class nxopen.uf.UFWeight.EstabCompPropsData
exceptions - Variable in class nxopen.uf.UFWeight.EstabPartProps1Data
exceptions - Variable in class nxopen.uf.UFWeight.EstabPartPropsData
Exceptions() - Constructor for class nxopen.uf.UFWeight.Exceptions
Exceptions(int, UFWeight.ExceptionReason[], String[], String[], boolean[], int) - Constructor for class nxopen.uf.UFWeight.Exceptions
EXCESS_MATERIAL - Static variable in class nxopen.features.shipdesign.ExcessMaterialBuilder.Types: excess material placement method
ExcessMaterial - Interface in nxopen.features.shipdesign: Represents a excess material feature
To create or edit an instance of this class, use ExcessMaterialBuilder

Created in NX7.5.0
ExcessMaterialBuilder - Interface in nxopen.features.shipdesign: Represents a ExcessMaterial builder.
ExcessMaterialBuilder.Offset - Class in nxopen.features.shipdesign: The offset type (only applicable for excess material, fitup will ignore the offset type)
ExcessMaterialBuilder.Types - Class in nxopen.features.shipdesign: The feature type
ExcessMaterialBuilder.VersionID - Class in nxopen.features.shipdesign: version identifiers for the different revisions of the excess material feature.
exchangePLCRelevantProduct() - Method in interface nxopen.ame.ProductSelectionBuilder: Returns the option to exchange plc relevant product
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
exchangeProductForNotLockedTemplate() - Method in interface nxopen.ame.ProductSelectionBuilder: Returns the option to exchange product for device which are not members of locked template
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
Excitation - Interface in nxopen.cae.responsesimulation: Represents the abstract class of dynamic excitations
This is an abstract class, and cannot be created.
Excitation.Component - Class in nxopen.cae.responsesimulation: Represents the component type.
EXCITATION_FUNCTION - Static variable in class nxopen.cae.responsesimulation.RSEvent.DurationOption
excitationAxis() - Method in interface nxopen.cae.LaminateRandomEventBuilder: Deprecated.
Deprecated in NX10.0.0. Use LaminateDynamicEventBuilder.excitationSelectedAxis() instead.
ExcitationBuilder - Interface in nxopen.cae.responsesimulation: Represents the abstract excitation builder class.
ExcitationBuilder.ExcitationLocationType - Class in nxopen.cae.responsesimulation: the type of excitation location
ExcitationCollection - Interface in nxopen.cae.responsesimulation: Represents a collection of excitation objects
To obtain an instance of this class, refer to Manager

Created in NX5.0.0
excitationCoordinateSystem() - Method in interface nxopen.cae.LaminateRandomEventBuilder: Deprecated.
Deprecated in NX10.0.0. Use LaminateDynamicEventBuilder.excitationCsys() instead.
excitationCsys() - Method in interface nxopen.cae.LaminateDynamicEventBuilder: Returns the excitation coordinate system
License requirements: None.
excitationFunction() - Method in interface nxopen.cae.responsesimulation.DistributedLoadExcitationBuilder: Returns the magnitude function
License requirements: nx_response_anlys ("NX Response Analysis")
.
excitationFunction() - Method in interface nxopen.cae.responsesimulation.StaticLoadExcitationBuilder: Returns the magnitude function
License requirements: nx_response_anlys ("NX Response Analysis")
.
excitationLocation() - Method in interface nxopen.cae.responsesimulation.ExcitationLocationDefinition: Returns the excitation location on which the excitation will be applied.
excitationLocationDefinition() - Method in interface nxopen.cae.responsesimulation.ExcitationBuilder: Returns the excitation location definition
License requirements: nx_response_anlys ("NX Response Analysis")
.
ExcitationLocationDefinition - Interface in nxopen.cae.responsesimulation: Represents the manager to DistributedLoadExcitation .
excitationLocationId() - Method in interface nxopen.cae.responsesimulation.ExcitationLocationDefinition: Returns the ID of excitation location on which the excitation will be applied.
excitationLocationType() - Method in interface nxopen.cae.responsesimulation.ExcitationLocationDefinition: Returns the type of excitaion location
License requirements: nx_response_anlys ("NX Response Analysis")
.
excitationName() - Method in interface nxopen.cae.DurabilityExcitationBuilder: Returns the excitation name.
excitationName() - Method in interface nxopen.cae.responsesimulation.Excitation: Returns the excitation name
License requirements: nx_response_anlys ("NX Response Analysis")
.
excitations() - Method in interface nxopen.cae.DurabilityStaticEvent: The collection of excitations.
excitations() - Method in interface nxopen.cae.responsesimulation.Manager: Returns the Response Dynamics excitation collection belonging to this sim part .
excitationSelectedAxis() - Method in interface nxopen.cae.LaminateDynamicEventBuilder: Returns the excitation axis
License requirements: None.
excitationType() - Method in interface nxopen.cae.DurabilityStaticEventBuilder: Returns the excitation type.
exciterSelectionConfigs() - Method in interface nxopen.cae.PreTestExciterSelectionControl: The exciter configuration collection .
exciterSelectionControl() - Method in interface nxopen.cae.PreTestSolution: The exciter selection configuration setup for this pre-test setup .
EXCLUDE - Static variable in class nxopen.assemblies.SearchTerm.SearchTermLogicType: Exclude results found by this search term
EXCLUDE - Static variable in class nxopen.uf.UFClone.Action
EXCLUDE_AREA_ONLY - Static variable in class nxopen.geometricutilities.PatternFill.PatternFillOptions: section is for exclude area only
excludeBlend(Face) - Method in interface nxopen.modldirect.SelectBlend: Exclude the user de-selected blend face
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
EXCLUDED_FROM_SPATIAL_SEARCH - Static variable in class nxopen.uf.UFWeight.ExceptionReason
excludeDatumsFromFit() - Method in interface nxopen.preferences.SessionVisualizationScreen: Returns the option to specify whether datum objects and planar ship grids should not be examined when a Fit is done.
excludedContent() - Method in interface nxopen.drafting.DrawingCreationWizardBuilder: Returns the excluded content.
excludedFaces() - Method in interface nxopen.cam.SurfaceRegions: Returns the excluded faces
License requirements: None.
excludedFaces - Variable in class nxopen.uf.UFModl.DfoRegion
excludedFaces - Variable in class nxopen.uf.UFSubdiv.Isocline
excludedPairs - Variable in class nxopen.uf.UFClear.Summary
excludeNonOwnerParts() - Method in interface nxopen.validate.ValidatorOptions: Returns the configuration of excluding parts not owned by the user.
excludeReadonlyParts() - Method in interface nxopen.validate.ValidatorOptions: Returns the configuration of excluding read-only parts.
excludeRxConstraint() - Method in interface nxopen.motion.JointDefine: Returns the options of excluded rx constraint.
excludeRyConstraint() - Method in interface nxopen.motion.JointDefine: Returns the option of excluded ry constraint.
excludeRzConstraint() - Method in interface nxopen.motion.JointDefine: Returns the options of excluded rz constraint.
excludesColor() - Method in interface nxopen.cae.BCSelectionDisplayBuilder: Returns the excludes target sets displayed color
License requirements: None.
excludeXConstraint() - Method in interface nxopen.motion.JointDefine: Returns the options of excluded x constraint.
excludeYConstraint() - Method in interface nxopen.motion.JointDefine: Returns the options of excluded y constraint.
excludeZConstraint() - Method in interface nxopen.motion.JointDefine: Returns the options of excluded z constraint.
exclusionEdgeSelection() - Method in interface nxopen.cae.EdgeSticherBuilder: Returns the edges to be excluded from auto-stitch operation
License requirements: None.
execCommand(UFVariant, String) - Method in interface nxopen.uf.UFDbcMld: Refer to UF_DBC_MLD_exec_command for documentation.
execFormed(Tag) - Method in interface nxopen.uf.UFSmd: Refer to UF_SMD_exec_formed for documentation.
execSequence(Tag, int) - Method in interface nxopen.uf.UFSmd: Deprecated.
The equivalent Open C method has retired
execUnformed(Tag) - Method in interface nxopen.uf.UFSmd: Refer to UF_SMD_exec_unformed for documentation.
execute() - Method in interface nxopen.cae.optimization.TBSSmooth: Executes the surface generation
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
EXECUTE - Static variable in class nxopen.RuleManager.LicenseType
execute(String, String, String, Object[]) - Method in interface nxopen.Session: Invokes a method in a managed library.
EXECUTE - Static variable in class nxopen.uistyler.FileOperationData.FileOperationType: Execute file operation
executeApiExit() - Method in interface nxopen.cam.WedmGeomBuilder: Execute api exit
License requirements: cam_base ("CAM BASE")
.
executeApiExit() - Method in interface nxopen.cam.WedmOperationBuilder: Execute api exit
License requirements: cam_base ("CAM BASE")
.
executeCheck() - Method in interface nxopen.cae.modelcheck.ElementEdgeCheckBuilder: Finds free edges when ElementEdgeCheckBuilder.checkFreeEdges() and ElementEdgeCheckBuilder.setCheckFreeEdges(boolean) is set, and non-manifold edges when ElementEdgeCheckBuilder.checkNonManifoldEdges() and ElementEdgeCheckBuilder.setCheckNonManifoldEdges(boolean) is set.
executeCheck() - Method in interface nxopen.cae.modelcheck.ElementQualityCheckBuilder: Execute element quality checking for ElementQualityCheckBuilder.selectionList() and returns the check results.You could also use Builder.commit() to do the checking.
ExecuteCheckData() - Constructor for class nxopen.cae.modelcheck.ElementEdgeCheckBuilder.ExecuteCheckData
executeCommand(UFVariant, String) - Method in interface nxopen.uf.UFMom: Refer to UF_MOM_execute_command for documentation.
executeDeferCommand(int[], int) - Method in interface nxopen.cam.CutRegionsBuilder: Execute defer command method
License requirements: None.
executeDeleteCommand(int[], int) - Method in interface nxopen.cam.CutRegionsBuilder: Execute delete command method
License requirements: None.
executeDryRun() - Method in interface nxopen.pdm.PartOperationImportBuilder: Execute the dry run
License requirements: assemblies ("ASSEMBLIES MODULE")
.
executeEditCommand() - Method in interface nxopen.cam.CutRegionsBuilder: Execute edit command method
License requirements: None.
executeGougeCheckCommand() - Method in interface nxopen.cam.CutRegionsBuilder: Execute gouge check command method
License requirements: None.
executeGrip(String, Object[]) - Method in interface nxopen.Session: Call a grip subroutine.
executeLogFile(UFClone.OperationClass, String, UFClone.ExLogOpts) - Method in interface nxopen.uf.UFClone: Refer to UF_CLONE_execute_log_file for documentation.
executeMergeCommand() - Method in interface nxopen.cam.CutRegionsBuilder: Execute merge command method
License requirements: None.
executeMode() - Method in interface nxopen.mechatronics.DisplayChangerBuilder: Returns the execute mode.
executeMovePosition() - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder: Move the position of die, punch and binder, according to LsdynaGeometryPreparationBuilder.diePosition() , LsdynaGeometryPreparationBuilder.punchPosition() , LsdynaGeometryPreparationBuilder.binderPosition() settings.
executeNesting() - Method in interface nxopen.mfg.am.Nester3D: Execute the Nesting
License requirements: am_pb_mtls_nest_3d_2 ("Advanced NX Powder Bed Additive 3D Nesting") OR am_pb_mtls_nest_3d_1 ("Basic NX Powder Bed Additive 3D Nesting")
.
executeOnce() - Method in interface nxopen.mechatronics.ObjectTransformerBuilder: Returns the execute once per activation.
executeOnce() - Method in interface nxopen.mechatronics.TransmitterEntryBuilder: Returns the execute once per activation.
executePipNode(Tag) - Method in interface nxopen.uf.UFSmd: Refer to UF_SMD_execute_pip_node for documentation.
executeQuery() - Method in interface nxopen.ame.AMEQuery: Execute query and get engineering objects as result
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
executeQuery(UFVariant, String, String) - Method in interface nxopen.uf.UFLib: Refer to UF_LIB_execute_query for documentation.
ExecuteQueryData() - Constructor for class nxopen.uf.UFLib.ExecuteQueryData
executeQueryForCount(UFVariant, String, String) - Method in interface nxopen.uf.UFLib: Refer to UF_LIB_execute_query_for_count for documentation.
executeRelink() - Method in interface nxopen.assemblies.RelinkerBuilder: Relink with new source, for WAVE links, interpart explression or both.
executeRenameAssembly() - Method in interface nxopen.linedesigner.ReuseLibraryUtilityBuilder: To executes the renaming of the cloned component when it is added under an assembly
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
executeRestorePosition() - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder: Restore the position of die, punch and binder.
executeReverseCommand(int[], int) - Method in interface nxopen.cam.CutRegionsBuilder: Execute reverse command method
License requirements: None.
executeSaveToolAxisCommand(int[], int) - Method in interface nxopen.cam.CutRegionsBuilder: Execute save tool axis command method
License requirements: None.
executeSearch() - Method in interface nxopen.annotations.SearchModelViewBuilder: TODO: fill in a description for this
License requirements: None.
executeSearch(boolean, String) - Method in interface nxopen.shapesearch.ShapeSearchBuilder: Execute new search or saved search and output error message if error.
ExecuteSearchData() - Constructor for class nxopen.shapesearch.ShapeSearchBuilder.ExecuteSearchData
executeSplitCommand() - Method in interface nxopen.cam.CutRegionsBuilder: Execute split command method
License requirements: None.
executingJournal() - Method in interface nxopen.Session: Returns the full path to the journal that is currently being executed
License requirements: None.
EXECUTIVE - Static variable in class nxopen.cam.InspectionGraphicalReportOutputBuilder.PageSizeType
EXECUTIVE - Static variable in class nxopen.cam.WorkInstructionOutputBuilder.PageSizeType
EXECUTIVE - Static variable in class nxopen.PrintBuilder.PaperSize: Executive, 7 1/4- by 10 1/2-inches
exhaustPressure() - Method in interface nxopen.mechatronics.HydraulicValveBuilder: Returns the initial exhaust pressure.
exhaustPressure() - Method in interface nxopen.mechatronics.PneumaticValveBuilder: Returns the initial exhaust pressure.
EXIST - Static variable in class nxopen.InferSnapType.SnapType: exsisting point
EXISTED_SHEET_BODY - Static variable in class nxopen.tooling.ScrapDesignBuilder.ScrapDefType: Existed sheet body will be converted to scrap
EXISTING - Static variable in class nxopen.cae.connections.CsysType: Existing CSYS
EXISTING - Static variable in class nxopen.cae.ElementCreateBuilder.NewMeshType: add to existing mesh
EXISTING - Static variable in class nxopen.cae.ElementExtrudeBuilder.NewMeshType: add to existing mesh
EXISTING - Static variable in class nxopen.cae.ElementProjectBuilder.NewMeshType: Add to existing mesh
EXISTING - Static variable in class nxopen.cae.ElementReflectBuilder.NewMeshType: add to existing mesh
EXISTING - Static variable in class nxopen.cae.ElementRevolveBuilder.NewMeshType: add to existing mesh
EXISTING - Static variable in class nxopen.cae.ElementRotateBuilder.NewMeshType: add new elements to an existing mesh
EXISTING - Static variable in class nxopen.cae.ElementTranslateBuilder.NewMeshType: add new elements to an existing mesh
EXISTING - Static variable in class nxopen.cae.NoteFolder.FolderType: Add to Existing folder
EXISTING - Static variable in class nxopen.cae.NoteManager.FolderType: Add to Existing folder
EXISTING - Static variable in class nxopen.cae.SpiderElementBuilder.NewMeshType: add to existing mesh
EXISTING - Static variable in class nxopen.cam.InspectionMethodBuilder.ReferenceFeatureModeTypes: Relative measurement to existing feature
EXISTING - Static variable in class nxopen.cam.InspectionMoveBuilder.TipAngleTypes: From existing sensor
EXISTING - Static variable in class nxopen.cam.InspectionMoveBuilder.TipModeTypes: From existing sensor
EXISTING - Static variable in class nxopen.features.MapleBuilder.AssociativityEnum: Deprecated.
EXISTING - Static variable in class nxopen.features.MathIntegrationBuilder.AssociativityTypes: Maintain associativity to the worksheet
EXISTING - Static variable in class nxopen.features.MirrorFaceBuilder.MirrorPlaneOptions: Existing Plane
EXISTING - Static variable in class nxopen.features.MirrorFeatureBuilder.PlaneOptions: existing plane
EXISTING - Static variable in class nxopen.features.shipdesign.ShellTemplateBuilder.PlaneLocationTypes: Use existing planes to define the individual template locations.
EXISTING - Static variable in class nxopen.features.SymmetricBuilder.PlaneOptions: existing plane
EXISTING - Static variable in class nxopen.geometricutilities.MirrorPattern.PlaneOptions: existing plane
EXISTING - Static variable in class nxopen.MeasureBuilder.RequirementType
EXISTING - Static variable in class nxopen.positioning.ComponentNetwork.ArrangementsMode: Apply transforms in arrangements according to existing component properties.
EXISTING - Static variable in class nxopen.preferences.PartDrafting.BreakLineStyle: Existing Curve
EXISTING - Static variable in class nxopen.routing.ControlPointCollection.FoundExisting: Object existed already.
EXISTING_CONNECTIVITY - Static variable in class nxopen.cae.ElementSplitBuilder.SplitMethodType: use existing element connectivity
EXISTING_CURVE - Static variable in class nxopen.cam.InspectionMethodBuilder.ScanCurveModeTypes: Use existing curve
EXISTING_CURVE - Static variable in class nxopen.geometricutilities.BoundingObjectBuilder.Method: Existing Curve
EXISTING_CURVE - Static variable in class nxopen.weld.JointmarkGuideBuilder.Location: Existing Curve
EXISTING_ITEM - Static variable in class nxopen.features.vehicledesign.BaseDataImportExportBuilder.ExportOptions
EXISTING_LINE - Static variable in class nxopen.annotations.AssociativityLineOption: Existing line
EXISTING_LINE - Static variable in class nxopen.uf.UFDrf.AssocLineType
EXISTING_LINE_TYPE - Static variable in class nxopen.uf.UFDrf.ObjectAssocLineType
EXISTING_OBJECT - Static variable in class nxopen.tooling.SplitSolidBuilder.ToolObjectOption: Existing Object option
EXISTING_PART - Static variable in class nxopen.cae.ConvertToConvergentBodyBuilder.Option: The existing part where the convergent body in the FEM part will be exported to
EXISTING_PART - Static variable in class nxopen.Catiav5Creator.ExportFromOption: export data from existing part which is on disk
EXISTING_PART - Static variable in class nxopen.DxfdwgCreator.ExportFromOption: export data from existing part which is on disk
EXISTING_PART - Static variable in class nxopen.IgesCreator.ExportFromOption: export data from existing part which is on disk
EXISTING_PART - Static variable in class nxopen.NXTo2dCreator.ExportFromOption: export data from existing part which is on disk
EXISTING_PART - Static variable in class nxopen.Step203Creator.ExportFromOption: Deprecated.

export data from existing part which is on disk
EXISTING_PART - Static variable in class nxopen.Step214Creator.ExportFromOption: Deprecated.

export data from existing part which is on disk
EXISTING_PART - Static variable in class nxopen.StepCreator.ExportFromOption: export data from existing part which is on disk
EXISTING_PLANE - Static variable in class nxopen.features.MirrorCurveBuilder.PlaneOptions: existing plane
EXISTING_PLANE - Static variable in class nxopen.Sketch.PlaneOption: Use existing plane
EXISTING_POINT - Static variable in class nxopen.cam.InspectionLinearMoveToPointBuilder.PointTypeEnums: Select an existing point
EXISTING_POINT - Static variable in class nxopen.cam.InspectionMeasurePointBuilder.PointTypes: Select an existing point
EXISTING_POINTS - Static variable in class nxopen.weld.JointmarkBuilder.Method: Existing Points.
EXISTING_SCENARIO_MOTION_MODEL - Static variable in class nxopen.features.vehicledesign.TireEnvelopeBuilder.MotionMethod: From an existing scenario motion model.
EXISTING_SECTION - Static variable in class nxopen.features.SectionInertiaAnalysisBuilder.Types: Existing Section Type
EXISTING_SKETCH - Static variable in class nxopen.features.shipdesign.PenetrationRequest.CoutoutType
EXISTING_SPINDLE_FILE - Static variable in class nxopen.features.vehicledesign.TireEnvelopeBuilder.MotionMethod: From an existing spindle file.
EXISTING_SYMBOL - Static variable in class nxopen.pid.SymbolSourceOption: from the symbol in document window.
existingAutomaticAnnotation() - Method in interface nxopen.features.shipdesign.DrawingAnnotationBuilder: Returns the option specify how to handle existing annotation
License requirements: None.
existingAutomaticAnnotationOption() - Method in interface nxopen.drafting.AnnotateViewsBuilder: Returns the existing automatic annotation option
License requirements: None.
existingCurve() - Method in interface nxopen.drawings.BrokenViewBuilder: Returns the curve to use as existing curve
License requirements: None.
existingEefFile() - Method in interface nxopen.cae.responsesimulation.InitialConditions: Returns an existing EEF file containing initial condition.
existingFile() - Method in interface nxopen.cae.ConvertToConvergentBodyBuilder: Returns the existing part file name which is required if ConvertToConvergentBodyBuilder.Option is set to ConvertToConvergentBodyBuilder.Option.EXISTING_PART
License requirements: None.
existingMirrorPlane() - Method in interface nxopen.features.MirrorFaceBuilder: Returns the existing mirror plane
License requirements: None.
existingPlane() - Method in interface nxopen.features.MirrorCurveBuilder: Returns the Mirror plane/face
License requirements: None.
existingPlane() - Method in interface nxopen.geometricutilities.MirrorPattern: Returns the Existing Mirror Plane
License requirements: None.
existingPlane() - Method in interface nxopen.geometricutilities.SupportPlaneData: Returns the existing face or plane
License requirements: None.
existingPoint() - Method in interface nxopen.cae.MeshPointExistingPointBuilder: Returns the node
License requirements: None.
existingSymbol() - Method in interface nxopen.pid.EquipmentBuilder: Returns the symbol from foundation window.
existingSymbol() - Method in interface nxopen.pid.PortEquipmentBuilder: Returns the symbol from foundation window.
existingSymbolLogicalElementRevision() - Method in interface nxopen.pid.EquipmentBuilder: Returns the Logical Element Revision for the symbol.
existingSymmetryPlane() - Method in interface nxopen.features.SymmetricBuilder: Returns the existing symmetry plane.
EXISTS - Static variable in class nxopen.shipdesign.Generator.ClashType: Clash exists; only this is requested.
existScrap() - Method in interface nxopen.tooling.ScrapDesignBuilder: Returns the existed scrap served for exist sheet body method
License requirements: None.
existsInDatabase() - Method in interface nxopen.issue.IssueList: Returns whether the list exists in database
License requirements: nx_issue_mgmt ("NX Issue Tracking")
.
exit() - Method in interface nxopen.ame.ApplicationBuilder: Exit the Automation Designer application and delete builder.
EXIT - Static variable in class nxopen.assemblies.AssembliesEventTypes: browser exit event
EXIT - Static variable in class nxopen.cam.InspectionPathBuilder.EntryExitType: Exit Point
exit() - Method in interface nxopen.geometricutilities.ReplAsstBuilder: Exit the Replacement Assistant mapping environment.
exit() - Method in interface nxopen.linedesigner.LineDesignerApplicationBuilder: To exit LineDesigner application this call will destroy the builder
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
exit() - Method in interface nxopen.PolygonModelingTaskEnvironment: Ends Polygon Modeling task environment.
exit() - Method in interface nxopen.SubdivisionTaskEnvironment: Ends subdivision task environment.
exit() - Method in interface nxopen.tooldesigner.ToolDesignerApplicationBuilder: Exit the ToolDesigner application this call will destroy the builder
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
EXIT - Static variable in class nxopen.uistyler.FileOperationData.FileOperationState: Exit file state
EXIT_DIALOG - Static variable in class nxopen.uistyler.DialogState: Exit from the dialog
EXIT_FILE_OPERATION_REASON - Static variable in class nxopen.uistyler.StylerEvent.Reason: Exit file operation reason
exitActivate() - Method in interface nxopen.layout2d.Component: Exits the component active status without committing the changes.
exitAvoidance() - Method in interface nxopen.cam.InspectionMethodBuilder: Returns a flag to indicate if collision avoidance is required at exit
License requirements: None.
exitCustomApp() - Method in interface nxopen.uf.UFRoute: Refer to UF_ROUTE_exit_custom_app for documentation.
exitDraftingApplication() - Method in interface nxopen.DraftingManager: Exit the drafting application
License requirements: None.
exitEndOffset() - Method in interface nxopen.cam.MachiningRegionBuilder: Returns the exit end offset
License requirements: None.
exitLibraryAuthoring() - Method in interface nxopen.pid.PidManager: Exit Library Authoring Tool.
exitListingWindow() - Method in interface nxopen.uf.UFUi: Refer to UF_UI_exit_listing_window for documentation.
exitLoop() - Method in interface nxopen.tooling.TraverseLoopBuilder: Returns the option to exit the current loop.
exitMenuApplication() - Method in interface nxopen.menubar.MenuBarManager.ExitMenuApplication: Prototype for callback called whenever the application is exited
License requirements: None.
exitPartNavigator() - Method in interface nxopen.Session: Exits the part navigator
License requirements: None.
exitPoint() - Method in interface nxopen.cam.InspectionMethodBuilder: Returns a flag to indicate if an exit point is required
License requirements: None.
exitStartOffset() - Method in interface nxopen.cam.MachiningRegionBuilder: Returns the exit start offset
License requirements: None.
exitTransition() - Method in interface nxopen.cam.InspectionMethodBuilder: Returns the type of exit transition
License requirements: None.
ExLogOpts() - Constructor for class nxopen.uf.UFClone.ExLogOpts
ExLogOpts(boolean, boolean) - Constructor for class nxopen.uf.UFClone.ExLogOpts
EXP - Static variable in class nxopen.features.DeformDefinitionBuilder.ExpressionType: Regular expression.
exp - Variable in class nxopen.features.DeformDefinitionBuilder.JaDeformDefinitionExpData: Tag of Expression object.
exp - Variable in class nxopen.routing.SplinePathBuilder.OffsetData: The expression defining the offset distance.
exp - Variable in class nxopen.uf.UFModl.UdfsExp
exp1() - Method in interface nxopen.SketchExpressionModifierBuilder: Returns the exp1
License requirements: None.
exp10() - Method in interface nxopen.SketchExpressionModifierBuilder: Returns the exp10
License requirements: None.
exp11() - Method in interface nxopen.SketchExpressionModifierBuilder: Returns the exp11
License requirements: None.
exp12() - Method in interface nxopen.SketchExpressionModifierBuilder: Returns the exp12
License requirements: None.
exp2() - Method in interface nxopen.SketchExpressionModifierBuilder: Returns the exp2
License requirements: None.
exp3() - Method in interface nxopen.SketchExpressionModifierBuilder: Returns the exp3
License requirements: None.
exp4() - Method in interface nxopen.SketchExpressionModifierBuilder: Returns the exp4
License requirements: None.
exp5() - Method in interface nxopen.SketchExpressionModifierBuilder: Returns the exp5
License requirements: None.
exp6() - Method in interface nxopen.SketchExpressionModifierBuilder: Returns the exp6
License requirements: None.
exp7() - Method in interface nxopen.SketchExpressionModifierBuilder: Returns the exp7
License requirements: None.
exp8() - Method in interface nxopen.SketchExpressionModifierBuilder: Returns the exp8
License requirements: None.
exp9() - Method in interface nxopen.SketchExpressionModifierBuilder: Returns the exp9
License requirements: None.
expand(Node.ExpandOption) - Method in interface nxopen.blockstyler.Node: Expands/collapses the node
License requirements: None.
EXPAND - Static variable in class nxopen.blockstyler.Node.ExpandOption: Use this option to expand the node.
EXPAND - Static variable in class nxopen.cae.SimBCDisplay.Mode: Set an expanded display mode
expand() - Method in interface nxopen.View: Expands the specified view to fill as much of the layout which contains the view as possible, without changing the aspect ratio of the view.
expandChildNodes() - Method in interface nxopen.shipdesign.ShipNavigatorNodeBuilder: Returns the setting indicates if the node we create or edit will expand its children in ship navigator.
expandCollapseModelViewNode(boolean) - Method in interface nxopen.ModelingViewCollection: Expand or collapse the Model View node in the Part Navigator.
expandCollapseNode(boolean) - Method in interface nxopen.ModelingView: Expand or collapse the node for the specified Model View in the Part Navigator.
expandCollapsePmiNode(boolean) - Method in interface nxopen.annotations.PmiCollection: Expand or collapse the PMI node in the Part Navigator.
expandConcurrent() - Method in interface nxopen.routing.DesignRuleManager: Expand the current list of objects on the concurrent check list to include 'dependents'
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
expanded() - Method in interface nxopen.blockstyler.UIBlock: Returns the Expanded
License requirements: None.
expanded() - Method in interface nxopen.diagramming.NodeBuilder: Returns the node state of expanded or collapsed.
expandSets(GeometrySet[]) - Method in interface nxopen.cam.Geometry: Expanding the geometry sets
License requirements: cam_base ("CAM BASE")
.
expandView() - Method in interface nxopen.uf.UFUiOnt: Refer to UF_UI_ONT_expand_view for documentation.
expandView(Tag) - Method in interface nxopen.uf.UFView: Refer to UF_VIEW_expand_view for documentation.
expandWorkView() - Method in interface nxopen.uf.UFView: Refer to UF_VIEW_expand_work_view for documentation.
ExpansionDrawing - Interface in nxopen.features.shipdesign: Represents a expansion drawing feature.
ExpansionDrawingBuilder - Interface in nxopen.features.shipdesign: Represents a ExpansionDrawingBuilder .
ExpansionDrawingBuilder.JaExpansiondrawingbuilderEnglishScale - Class in nxopen.features.shipdesign: the standard English drawing sheet scales
ExpansionDrawingBuilder.JaExpansiondrawingbuilderMetricScale - Class in nxopen.features.shipdesign: the standard Metric drawing sheet scales
expansionRadius1() - Method in interface nxopen.cae.connections.ConnectionData: Returns the expansion radius1
License requirements: None.
expansionRadius2() - Method in interface nxopen.cae.connections.ConnectionData: Returns the expansion radius2
License requirements: None.
expansionRadiusFactor1() - Method in interface nxopen.cae.connections.ConnectionData: Returns the expansion radius factor1
License requirements: None.
expansionRadiusFactor2() - Method in interface nxopen.cae.connections.ConnectionData: Returns the expansion radius factor2
License requirements: None.
expDefs - Variable in class nxopen.uf.UFModl.UdfsDefData
experience() - Method in interface nxopen.cam.ProbeControlParametersBuilder: Returns the experience value location
License requirements: None.
EXPLICIT - Static variable in class nxopen.assemblies.PositionOverrideType: Position explicitly overridden by user
EXPLICIT - Static variable in class nxopen.cae.ModelDisplayBuilder.NodeDisplayModeType: Nodes are explicitly shown and hidden via the Show/Hide commands.
EXPLICIT - Static variable in class nxopen.routing.RoutingBulkReplacementBuilderRetainReasonType: Retain reason is the user explicitly marked it retain
EXPLICIT_FACES - Static variable in class nxopen.uf.UFSurfReg.Type
explicitCheckIn - Variable in class nxopen.pdm.PdmPart.CheckinInput: True to perform explicit check in, false otherwise
explicitCheckOut - Variable in class nxopen.pdm.PdmPart.CheckoutInput: True to perform explicit check out, false otherwise
explicitDelayed - Variable in class nxopen.PartDelayedUpdateStatus.DelayStatusInfo: The part is frozen in this session.
EXPLICITLY - Static variable in class nxopen.BaseSession.LibraryUnloadOption: Unload the library from the "Unload Shared Image" dialog
ExplicitSearchTerm - Interface in nxopen.assemblies: A SubsetRecipe search term that refers explicitly to a design element.
explodeComponent(Tag, Tag, double[][]) - Method in interface nxopen.uf.UFAssem: Refer to UF_ASSEM_explode_component for documentation.
EXPLODED - Static variable in class nxopen.uf.UFAssem.ExplStatus
ExplodedComponent - Interface in nxopen.assemblies: Represents a Component within an explosion.
explodeMechanism(String) - Method in interface nxopen.motion.PostProcess: Explode mechanism
License requirements: mechanisms ("MECHANISMS")
.
Explorer - Interface in nxopen.blockstyler: Represents an Explorer block.
Explorer.NotifyNodeSelectedPostCallback - Interface in nxopen.blockstyler: The NotifyNodeSelectedPost callback notifies a client after navigating to the next node in the Explorer.
Explorer.NotifyNodeSelectedPreCallback - Interface in nxopen.blockstyler: The NotifyNodeSelectedPre callback notifies a client before navigating to the next node in the Explorer.
exploreReport() - Method in interface nxopen.visualreporting.VisualReportExplorer: Returns the Explore Report setting
License requirements: None.
Explosion - Interface in nxopen.assemblies: Represents an explosion.
explosion() - Method in interface nxopen.userdefinedtemplate.InstantiationBuilder: Returns the property of whether user is allowed to explode User Defined Template instantiation
License requirements: None.
ExplosionCollection - Interface in nxopen.assemblies: Represents a collection of explosions
To obtain an instance of this class, refer to ComponentAssembly

Created in NX4.0.0
explosionFlag - Variable in class nxopen.uf.UFModl.UdfsDefData
explosions() - Method in interface nxopen.assemblies.ComponentAssembly: The collection of Explosion s defined in the ComponentAssembly
Created in NX3.0.0
explosionTags - Variable in class nxopen.uf.UFAssem.AskExplosionsData
expModified - Variable in class nxopen.ExpressionCollection.ImportFromFileData: TRUE if any expressions were affected by the import
expname() - Method in interface nxopen.cae.ResultVariable: Returns the Result Field Expression Name
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
expName - Variable in class nxopen.Expression.InterpartExpressionNamesData
expName - Variable in class nxopen.features.DeformDefinitionBuilder.JaDeformDefinitionExpData: Name of expression.
expName() - Method in interface nxopen.motion.ResultMeasureBuilder: Returns the expression name
License requirements: mechanisms ("MECHANISMS")
.
expName - Variable in class nxopen.uf.UFModl.UdfsExp
export(String) - Method in interface nxopen.cae.LayoutState: Exports the layout state to an external file
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
export(String) - Method in interface nxopen.cae.responsesimulation.RSEvent: Exports event definition to a XML file
License requirements: nx_response_anlys ("NX Response Analysis")
.
EXPORT - Static variable in class nxopen.cae.ResultsManipulationBuilder.Action: Deprecated.
export() - Method in interface nxopen.cae.SmoothOptResultsBuilder: Export model files
License requirements: nx_masterfem ("Finite Element Modeling")
.
export() - Method in interface nxopen.cam.CutterExport: The cutter export entry
License requirements: None.
EXPORT - Static variable in class nxopen.features.vehicledesign.BaseDataImportExportBuilder.OperateOptions
EXPORT - Static variable in class nxopen.motion.MechatronicsBuilder.PurposeType
export(String, boolean) - Method in interface nxopen.report.Report: Exports the report contents to a document.
EXPORT_ASSEMBLY - Static variable in class nxopen.tooling.RenameAndExportComponentBuilder.Types
EXPORT_CGM_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
EXPORT_COMPONENT_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
EXPORT_CONTROL - Static variable in class nxopen.annotations.PmiPreferences.PreferenceSymbolTypes: export control
EXPORT_CONTROL_TYPE - Static variable in class nxopen.uf.UFPd.AttributeType
EXPORT_DIAGRAM_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
EXPORT_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
EXPORT_EXPRESSIONS_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
EXPORT_INV_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
EXPORT_OPERATION - Static variable in class nxopen.uf.UFClone.OperationClass
EXPORT_PARASOLID_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
EXPORT_PART_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
EXPORT_PART_NEW - Static variable in class nxopen.pdm.PartBuilder.Operation: File->Export->NXOpen.Part:New radio button
EXPORT_REASON - Static variable in class nxopen.uf.UFCgm.ExportReason
EXPORT_RESULT_FILE - Static variable in class nxopen.cae.ResultsCombinationBuilder.Output
EXPORT_RESULT_FILE - Static variable in class nxopen.cae.ResultsEnvelopeBuilder.Output
EXPORT_RESULT_FILE - Static variable in class nxopen.cae.ResultsReductionBuilder.Output
EXPORT_RESULTS_AND_MODEL - Static variable in class nxopen.cae.ResultsManipulationBuilder.Action: Deprecated.

no longer used
EXPORT_RESULTS_ONLY - Static variable in class nxopen.cae.ResultsManipulationBuilder.Action: Deprecated.

no longer used
EXPORT_RPT_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
EXPORT_TO_NATIVE - Static variable in class nxopen.tooling.ToolingCloneaction: Export part from Teamcenter to native
exportAdamsAnlFile(String, UFMotion.AnlGeometryFormat, UFMotion.StlParameters) - Method in interface nxopen.uf.UFMotion: Refer to UF_MOTION_export_adams_anl_file for documentation.
exportAdamsResFile(String) - Method in interface nxopen.uf.UFMotion: Refer to UF_MOTION_export_adams_res_file for documentation.
exportAfu(String, int, String) - Method in interface nxopen.cae.AfuManager: Export an AFU Data Record to a CSV, MAT or DAC file
License requirements: None.
exportAfuFile(String, String) - Method in interface nxopen.cae.AfuManager: Export all Data Records of an AFU to a RPCIII file
License requirements: None.
exportAs() - Method in interface nxopen.DxfdwgCreator: Returns the export as - this option will determine if data needs to be proprocessed as 2d or cgm before exporting to DXF/DWG
License requirements: None.
exportAs() - Method in interface nxopen.StepCreator: Returns the export as - this option will determine if data needs to be exported using AP203 or AP214 or AP242
License requirements: None.
exportBeamSectionToLibrary(String, ReusableObject) - Method in interface nxopen.tooling.CaeReuseLibrary: Exports a beam section to created reuse library
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
exportButton() - Method in interface nxopen.cae.FlatPatternsBuilder: TODO: fill in a description for this
License requirements: nx_lam_composites ("Laminate Composites")
.
exportCatalog() - Method in interface nxopen.AttributeTemplatesBuilder: Exports templates to a specified external catalog.
exportCgm(Tag, UFCgm.ExportOptions, String) - Method in interface nxopen.uf.UFCgm: Refer to UF_CGM_export_cgm for documentation.
exportCommandsToLibraryFile(Command[], String) - Method in interface nxopen.report.CommandManager: Export selected commands to a library folder zip file.
ExportComponentHierarchyBuilder - Interface in nxopen.layout2d: Represents a Builder for export component 2D hierarchy
To create a new instance of this class, use ComponentCollection.createExportComponentHierarchyBuilder()

Created in NX11.0.0
exportComponents(NXObject, String, String) - Method in interface nxopen.tooling.RenameAndExportComponentBuilder: Export components
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
ExportControl - Interface in nxopen.annotations: Represents a Export Control
To create or edit an instance of this class, use ExportControlBuilder

Created in NX6.0.0
ExportControlBuilder - Interface in nxopen.annotations: Represents a ExportControl builder
To create a new instance of this class, use PmiAttributeCollection.createExportControlBuilder(nxopen.annotations.ExportControl)

Created in NX6.0.0
exportControlData() - Method in interface nxopen.tooling.MotionSimulationBuilder: Returns the export file of kinematic model control data
License requirements: None.
exportCsvFile(String) - Method in interface nxopen.cae.LaminateQuickReport: Export quick report to CSV file
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
exportCsvFile(String) - Method in interface nxopen.cae.LaminateSpreadsheetReport: Export spreadsheet report to CSV file
License requirements: nx_lam_composites ("Laminate Composites")
.
exportCsvFile(String) - Method in interface nxopen.cae.PreTestExciterConfig: Export exciter configuration to CSV file
License requirements: nx_correl_base ("FE Correlation")
.
exportCsvFile(PreTestSolution, String) - Method in interface nxopen.cae.PreTestSensorConfig: Export sensor configuration to CSV file
License requirements: nx_correl_base ("FE Correlation")
.
exportCustomHumanFile(String) - Method in interface nxopen.features.HumanBuilder: Export custom human file
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
exportCustomPostureFile(String) - Method in interface nxopen.features.HumanBuilder: Export custom posture file
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
exportData() - Method in interface nxopen.DxfdwgCreator: Returns the export data option will determine if model data data or drawing data needs to be exported
License requirements: None.
ExportData - Interface in nxopen.fields: Represents data for field export
To create a new instance of this class, use FieldManager.createExportData()

Created in NX6.0.0
exportData() - Method in interface nxopen.NXTo2dCreator: Returns the export data - export model data or drawings
License requirements: None.
exportData(Tag[], String) - Method in interface nxopen.uf.UFPs: Refer to UF_PS_export_data for documentation.
exportDesignVariablesCsvFile(String) - Method in interface nxopen.cae.ModelUpdateSolution: Export the model update design variables to the csv file
License requirements: nx_correl_update ("FE Model Update")
.
exportDfaInPart(String) - Method in interface nxopen.uf.UFUgmgrKf: Refer to UF_UGMGR_KF_export_dfa_in_part for documentation.
exportdirectorynames - Variable in class nxopen.pdm.FileManagement.ExportFilesData: Resulting location of export directory
exportDrapingDomainAsGroup() - Method in interface nxopen.cae.LaminatePly: Exports draping domain to a group
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
exportDrapingDomainAsGroups(boolean) - Method in interface nxopen.cae.LaminateGlobalLayup: Exports draping domain to a group
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
exportDrapingDomainAsGroups() - Method in interface nxopen.cae.LaminateGlobalLayupMgr: For each LaminateGlobalLayup in the model, create a group with the draping domain entities
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")

Created in NX7.5.2
exportDrapingResults(String, boolean, boolean, boolean, boolean, boolean) - Method in interface nxopen.cae.LaminateGlobalLayup: Exports draping results to a csv file.
exportDrapingResults(String, boolean, boolean, boolean, boolean, boolean) - Method in interface nxopen.cae.LaminatePly: Exports draping results to a csv file.
exportDrawingFile() - Method in interface nxopen.tooling.RenameAndExportComponentBuilder: Returns the export drawing file
License requirements: None.
exportDrawings() - Method in interface nxopen.IgesCreator: Returns the Export drawings to IGES - if set to ture drawings will be exported to IGES
License requirements: None.
exportDrawings(int, Tag[], Tag) - Method in interface nxopen.uf.UFGdt: Refer to UF_GDT_export_drawings for documentation.
ExportEClassMappingBuilder - Interface in nxopen.ame: Export eclass mapping into file
To create a new instance of this class, use AMEManager.createExportEclassMappingBuilder(nxopen.Part)

Created in NX12.0.0
exportErrorsCsvFile(ModelUpdateSolution.TargetType, String) - Method in interface nxopen.cae.ModelUpdateSolution: Export the model update errors to the csv file
License requirements: nx_correl_update ("FE Model Update")
.
exportExp(String) - Method in interface nxopen.uf.UFModlGeneral: Refer to UF_MODL_export_exp for documentation.
exportExpressionGroupsToFile(ExpressionGroup[], String, ExpressionCollection.SortType) - Method in interface nxopen.ExpressionGroupCollection: Exports the expressions in an expression group to a text file, or, if 'file_name' is null, list the expressions in the listing window.
exportExtRef() - Method in interface nxopen.Step203Creator: Deprecated.
Deprecated in NX11.0.0. Use StepCreator instead.
exportExtRef() - Method in interface nxopen.Step214Creator: Deprecated.
Deprecated in NX11.0.0. Use StepCreator instead.
exportExtRef() - Method in interface nxopen.StepCreator: Returns the export ext ref - if set to true NX data can be output as external reference
License requirements: None.
exportExtRefStructureAs() - Method in interface nxopen.Step203Creator: Deprecated.
Deprecated in NX11.0.0. Use StepCreator instead.
exportExtRefStructureAs() - Method in interface nxopen.Step214Creator: Deprecated.
Deprecated in NX11.0.0. Use StepCreator instead.
exportExtRefStructureAs() - Method in interface nxopen.StepCreator: Returns the export ext ref as - specifiy the external reference Structure type
License requirements: None.
exportFacesAs() - Method in interface nxopen.DxfdwgCreator: Returns the export faces as - this will determine if the faces should be exported as facets or polyline mesh
License requirements: None.
exportFatigueHistoryToCsv(String) - Method in interface nxopen.cae.DurabilityEvaluateFatigueHistoryBuilder: Export fatigue history functions to a csv file.
exportFields(ExportData) - Method in interface nxopen.fields.FieldManager: Exports fields to a text file as defined by export_data parameter
License requirements: None.
exportFile() - Method in interface nxopen.annotations.DraftingImage: Export the image file under the directory specified by system environment variable UGII_TMP_DIR
License requirements: None.
exportFile(String, SimConditionSeqMgr.FileFormat) - Method in interface nxopen.cae.SimConditionSeqMgr: Exports a SimConditionSequence to a file on disk.
exportFile() - Method in interface nxopen.mechatronics.ECADExportBuilder: Returns the export file name
License requirements: None.
exportFile() - Method in interface nxopen.mechatronics.ExportSensorsActuatorsBuilder: Returns the export file name
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
exportFile() - Method in interface nxopen.mechatronics.SCOUTExportBuilder: Returns the export file name
License requirements: None.
exportFile(String) - Method in interface nxopen.SpreadsheetManager: In NX/MGR mode, export an Excel spreadsheet file from the dataset file stored in the Teamcenter database to the native file system.
ExportFileData() - Constructor for class nxopen.annotations.DraftingImage.ExportFileData
exportFileFormat() - Method in interface nxopen.mechatronics.ECADExportBuilder: Deprecated.
Deprecated in NX9.0.0. This method has no replacement. It is no longer supported.
exportFileFormat() - Method in interface nxopen.mechatronics.SCOUTExportBuilder: Returns the export file format.
exportFiles(String[], String[], String[], String[], String[], String[], String[]) - Method in interface nxopen.pdm.FileManagement: Exports all associated files for the specified dataset(s) to a directory.
ExportFilesData() - Constructor for class nxopen.pdm.FileManagement.ExportFilesData
ExportFlatPatternBuilder - Interface in nxopen.features.sheetmetal: Represents a Export flat pattern builder.
ExportFlatPatternBuilder.DxfRevisionType - Class in nxopen.features.sheetmetal: Specifies the DXF Revisions for flat pattern export
ExportFlatPatternBuilder.FileType - Class in nxopen.features.sheetmetal: Specifies the flat pattern export type
exportFormatInLegacyFile() - Method in interface nxopen.preferences.RoutingElectrical: Returns the option to export the format at the top of a legacy routelist file.
exportFrom() - Method in interface nxopen.Catiav5Creator: Returns the export from - this option will determine if data from display part or existing part is exported
License requirements: None.
exportFrom() - Method in interface nxopen.DxfdwgCreator: Returns the export from - this option will determine if data from display part or existing part is exported
License requirements: None.
exportFrom() - Method in interface nxopen.IgesCreator: Returns the export from - this option will determine if data from display part or existing part is exported
License requirements: None.
exportFrom() - Method in interface nxopen.NXTo2dCreator: Returns the export from - this option will determine if data from display part or existing part is exported
License requirements: None.
exportFrom() - Method in interface nxopen.Step203Creator: Deprecated.
Deprecated in NX11.0.0. Use StepCreator instead.
exportFrom() - Method in interface nxopen.Step214Creator: Deprecated.
Deprecated in NX11.0.0. Use StepCreator instead.
exportFrom() - Method in interface nxopen.StepCreator: Returns the export from - this option will determine if data from display part or existing part is exported
License requirements: None.
exportHolder() - Method in interface nxopen.cam.CutterExport: The holder export entry
License requirements: None.
exportIcadGeometry(String, Tag[], int) - Method in interface nxopen.uf.UFStd: Refer to UF_STD_export_icad_geometry for documentation.
exportInformation(String) - Method in interface nxopen.cae.Laminate: Export detailed laminate information to a CSV file.
exportJt(String) - Method in interface nxopen.cae.CaePart: Exports JT file
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
exportLayup(String) - Method in interface nxopen.cae.Laminate: Export simple laminate definition to a csv file.
exportLayup(String) - Method in interface nxopen.cae.LaminateGlobalLayup: Export simple layup definition to a csv file.
exportLegacyComponentFile(String, String) - Method in interface nxopen.routing.RouteManager: Exports all of the NX Routing electrical information from the currently open part to the given XML or legacy component file.
exportLegacyHarnessFile(String, String) - Method in interface nxopen.routing.RouteManager: Exports all of the NX Routing electrical information from the currently open part to the given XML or legacy harness file.
ExportMachineKitBuilder - Interface in nxopen.sim: This class is used for the Export Machine Kit Dialog.
exportMachineKitBuilder(String) - Method in interface nxopen.sim.KinematicConfigurator: Creates a builder for export the machine tool kit
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
exportMaterialsToLibrary(String[], String[], String, boolean[]) - Method in interface nxopen.PhysicalMaterialCollection: Writes out materials to a material library file.
exportMaterialsToLibrary(String[], String[], String, boolean) - Method in interface nxopen.PhysicalMaterialCollection: Writes out materials to a material library file.
exportMdef(String, MechanismExport.PositionOrientationFormat, boolean, boolean, boolean, boolean, String, NXObject[]) - Method in interface nxopen.motion.MechanismExport: Exports selected objects to .mdef file
License requirements: mechanisms ("MECHANISMS")

Created in NX12.0.0
exportMesh() - Method in interface nxopen.cae.ElementCreateBuilder: Returns the option which indicates whether mesh is exported to solver or not.
exportMesh() - Method in interface nxopen.cae.ElementExtrudeBuilder: Returns the option which indicates whether mesh is exported to solver or not.
exportMesh() - Method in interface nxopen.cae.ElementProjectBuilder: Returns the option which indicates whether mesh is exported to solver or not.
exportMesh() - Method in interface nxopen.cae.ElementReflectBuilder: Returns the option which indicates whether mesh is exported to solver or not.
exportMesh() - Method in interface nxopen.cae.ElementRevolveBuilder: Returns the option which indicates whether mesh is exported to solver or not.
exportMesh() - Method in interface nxopen.cae.ElementTranslateBuilder: Returns the option which indicates whether mesh is exported to solver or not.
exportMesh() - Method in interface nxopen.cae.Mesh2dBuilder: Returns the option which indicates whether mesh is exported to solver or not.
exportMeshProperty() - Method in interface nxopen.cae.Mesh: Returns the export mesh property for this mesh.
exportModel(String, boolean, boolean) - Method in interface nxopen.mechatronics.MechatronicsManager: Deprecated.
Deprecated in NX9.0.0. Please use another method with the same name instead.
exportModel(String, boolean, boolean, boolean) - Method in interface nxopen.mechatronics.MechatronicsManager: Exports data model to XML file.
exportModelData() - Method in interface nxopen.IgesCreator: Returns the Export NX model data to IGES - if set to true model data will be exported to IGES
License requirements: None.
exportModePairCsvFile(String) - Method in interface nxopen.cae.CorrelSolution: Export mode pair to CSV file
License requirements: nx_correl_base ("FE Correlation")
.
exportMotion() - Method in interface nxopen.tooling.UserDefinedMotionBuilder: Returns the export motion
License requirements: None.
exportMotionHostCosimMfiles() - Method in interface nxopen.motion.MotionSolution: Export motion host cosim mfiles
License requirements: nx_motion_cosim ("NX Motion CoSimulation")
.
exportNCCode(String) - Method in interface nxopen.mechatronics.RuntimeNCBuilder: This method is used to export current loaded NC Code to disk file.
exportNodeMapCsvFile(String) - Method in interface nxopen.cae.CorrelSolution: Export node map to CSV file
License requirements: nx_correl_base ("FE Correlation")
.
exportObject(Remote) - Method in class nxopen.NXRemotableObject.RemotingProtocol
exportOption() - Method in interface nxopen.features.vehicledesign.BaseDataImportExportBuilder: Returns the option which indicates if the expressions are to be exported a new create item or an existing item in Teamcenter.
ExportOptions() - Constructor for class nxopen.uf.UFCgm.ExportOptions
ExportOptions(UFCgm.Colors, UFCgm.Widths, UFCgm.VdcMode, UFCgm.Size, UFCgm.TextMode, UFCgm.Fonts, UFCgm.ExportReason, double) - Constructor for class nxopen.uf.UFCgm.ExportOptions
ExportOptions() - Constructor for class nxopen.uf.UFPart.ExportOptions
ExportOptions(boolean, UFPart.ExportParamsMode, UFPart.ExportExpMode) - Constructor for class nxopen.uf.UFPart.ExportOptions
exportParameters(NXObject, String) - Method in interface nxopen.motion.MotionMethods: Export parameters of an entity into a txt file.
exportPart(String) - Method in interface nxopen.cam.Tool: Export part
License requirements: None.
exportPart(String, int, Tag[]) - Method in interface nxopen.uf.UFPart: Refer to UF_PART_export for documentation.
ExportPlantToDWG - Interface in nxopen.linedesigner: Represents the export plant to dwg
To create or edit an instance of this class, use ExportPlantToDWGBuilder

Created in NX9.0.0
ExportPlantToDWGBuilder - Interface in nxopen.linedesigner: Represents a LineDesigner.ExportPlantToDWG builder
To create a new instance of this class, use nxopen.linedesigner.LineDesignerManager#createExportPlantToDwgBuilder
Default values.
ExportPlantToDWGBuilder.SaveAsType - Class in nxopen.linedesigner: This enum represents dwg saving types
exportPliesToFibersim(String) - Method in interface nxopen.cae.LaminateGlobalLayup: Exports ply definitions to FiberSim using the hdf5 file format.
exportPlmxml(String, NXObject[]) - Method in interface nxopen.motion.MechanismExport: Exports Mechanism to .xml file.
exportPlmxml(String) - Method in interface nxopen.routing.RouteManager: Exports all of the NX Routing electrical information from the currently open part to the given file.
exportPointsToFile(String) - Method in interface nxopen.motion.SplineBeamBuilder: Exports the points to an external file.
exportProcessSimulateKinematics() - Method in interface nxopen.motion.MotionSession: Exports kinematics for Process Simulate
License requirements: mechanisms ("MECHANISMS")
.
exportRealTimeMovie(String) - Method in interface nxopen.motion.PostProcess: Export a real-time movie
License requirements: mechanisms ("MECHANISMS")
.
exportRecurdynSdk(String) - Method in interface nxopen.motion.MotionSimulation: Export Recurdyn sdk data, need an active solution in simulation
License requirements: mechanisms ("MECHANISMS")
.
exportResult() - Method in interface nxopen.tooling.MoldFeatureRecognitionBuilder: Export analysis result
License requirements: None.
exportResult() - Method in interface nxopen.tooling.SheetMetalFeatureRecognitionBuilder: Export analysis result
License requirements: None.
exportResultsToCsv(String) - Method in interface nxopen.cae.DurabilityDamageEvaluationBuilder: Export damage results to a csv file.
exportResultsToCsv(String) - Method in interface nxopen.cae.DurabilityResultsReportBuilder: Export durability results to a csv file.
exportRfiRelatedResults(String, String) - Method in interface nxopen.motion.FlexBodyBuilder: Export rfi related results in manager mode
License requirements: mechanisms ("MECHANISMS")
.
exportRunManaged(NXObject[], String) - Method in interface nxopen.pid.PidManager: Exports ElementGroup
License requirements: nx_pid_design_author ("NX P and ID Design Author")

Created in NX12.0.0
exportRunNative(NXObject[], String) - Method in interface nxopen.pid.PidManager: Exports ElementGroup
License requirements: nx_pid_design_author ("NX P and ID Design Author")

Created in NX12.0.0
exportScaleOption() - Method in interface nxopen.DxfdwgCreator: Returns the export scale Options - this will determine if the scale should be used from Default, Base View or User specified
License requirements: None.
exportScaleValue() - Method in interface nxopen.DxfdwgCreator: Returns the scale value - this Scale is used during Model space data export
License requirements: None.
exportSelectionBlock() - Method in interface nxopen.AcisExporter: Returns the export selection block - the object selection will be done by this block.
exportSelectionBlock() - Method in interface nxopen.Catiav4Creator: Returns the export selection block - the object selection will be done by this block.
exportSelectionBlock() - Method in interface nxopen.Catiav5Creator: Returns the export selection block - the object selection will be done by this block.
exportSelectionBlock() - Method in interface nxopen.DxfdwgCreator: Returns the export selection block - the object selection will be done by this block.
exportSelectionBlock() - Method in interface nxopen.IgesCreator: Returns the export selection block - the object selection will be done by this block.
exportSelectionBlock() - Method in interface nxopen.NXTo2dCreator: Returns the export selection block - the object selection will be done by this block.
exportSelectionBlock() - Method in interface nxopen.Step203Creator: Deprecated.
Deprecated in NX11.0.0. Use StepCreator instead.
exportSelectionBlock() - Method in interface nxopen.Step214Creator: Deprecated.
Deprecated in NX11.0.0. Use StepCreator instead.
exportSelectionBlock() - Method in interface nxopen.StepCreator: Returns the export selection block - the object selection will be done by this block.
exportSelectionBlock() - Method in interface nxopen.STLCreator: Returns the export selection block - the object selection will be done by this block.
exportSensitivitiesCsvFile(String) - Method in interface nxopen.cae.ModelUpdateSolution: Export the model update sensitivities to the csv file
License requirements: nx_correl_update ("FE Model Update")
.
ExportSensorsActuatorsBuilder - Interface in nxopen.mechatronics: Represents a ExportSensorsActuatorsBuilder .
exportShapeMetricsCsvFile(CorrelShapemetrictype, String) - Method in interface nxopen.cae.CorrelSolution: Export shape metrics to CSV file
License requirements: nx_correl_base ("FE Correlation")
.
exportShapeMetricsCsvFile(CorrelShapemetrictype, String) - Method in interface nxopen.cae.PreTestDofSet: Export dof set shape metrics to CSV file
License requirements: nx_correl_base ("FE Correlation")
.
exportShapeMetricsCsvFile(CorrelShapemetrictype, String) - Method in interface nxopen.cae.PreTestExciterConfig: Export exciter configuration shape metrics to CSV file
License requirements: nx_correl_base ("FE Correlation")
.
exportShapeMetricsCsvFile(CorrelShapemetrictype, String) - Method in interface nxopen.cae.PreTestSensorConfig: Export sensor configuration shape metrics to CSV file
License requirements: nx_correl_base ("FE Correlation")
.
exportShapeMetricsCsvFile(CorrelShapemetrictype, String) - Method in interface nxopen.cae.PreTestSolution: Export shape metrics to CSV file
License requirements: nx_correl_base ("FE Correlation")
.
exportSignalsToCsv(String, String[], String[], SignalBuilder.IOType[], SignalBuilder.DataType[], boolean[], int[], double[], String[], boolean, boolean) - Method in interface nxopen.mechatronics.PhysicsManager: Export specified MCD Signals, OPC Signal Connections and(or) SHM Signal Connections to csv file.
exportSignalsToExcel(String, String[], SignalBuilder.IOType[], SignalBuilder.DataType[], boolean[], int[], double[], String[], String[]) - Method in interface nxopen.mechatronics.PhysicsManager: Export specified MCD Signals to excel file (compatible with TIA portal format).
exportSignalsToTxt(String, String[], SignalBuilder.IOType[], SignalBuilder.DataType[], boolean[], int[], double[], String[], String[]) - Method in interface nxopen.mechatronics.PhysicsManager: Export specified MCD Signals to txt file (compatible with SIMIT format).
exportSimulation(String, CaeDataContainer) - Method in interface nxopen.cae.CaePart: Exports the Simulation data for a CaePart .
exportSimulinkHostCosimMfiles() - Method in interface nxopen.motion.MotionSolution: Export simulink host cosim mfiles
License requirements: nx_motion_cosim ("NX Motion CoSimulation")
.
exportSingleComponent(String, String) - Method in interface nxopen.tooling.RenameAndExportComponentBuilder: Export single component
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
exportSolverInputFile() - Method in interface nxopen.motion.MotionSolution: Export solver input file for a solution
License requirements: mechanisms ("MECHANISMS")
.
exportSpf(String) - Method in interface nxopen.sim.SinumerikCaExportBuilder: Export to Sinumerik Spf file
License requirements: nx_sinumerik_ca ("Sinumerik Collision Avoidance")
.
exportSplinesAs() - Method in interface nxopen.DxfdwgCreator: Returns the export Spline as - this will determine if the spline should be exported as spline, 2D ployline or 3D polyline
License requirements: None.
ExportSubdivisionGeometryBuilder - Interface in nxopen.features.subdivision: Represents a ExportSubdivisionGeometryBuilder builder.
exportTargetsCsvFile(ModelUpdateSolution.TargetType, String) - Method in interface nxopen.cae.ModelUpdateSolution: Export the model update targets to the csv file
License requirements: nx_correl_update ("FE Model Update")
.
exportTemplate(String) - Method in interface nxopen.cae.xyplot.PlotGraphTemplate: Exports current graph template setting to a template xml file, it will override the template file if it is existing.
exportTiaProject(AMEBaseNode[], String, boolean, boolean, boolean, boolean, boolean, boolean) - Method in interface nxopen.ame.AMEManager: Exports tia to external tool
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
exportToCsv(String) - Method in interface nxopen.cae.LbcAssociationMgr: Export to csv
License requirements: None.
exportToCsv(String, boolean, boolean) - Method in interface nxopen.mechatronics.PhysicsManager: Export MCD Signals, OPC Signal Connections and(or) SHM Signal Connections to csv file
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
exportToCSVFile(String) - Method in interface nxopen.cae.SimLoadRecipe: Exports mapping entries to a CSV file.
ExportToDWG - Interface in nxopen.linedesigner: Represents an export to dwg
To create or edit an instance of this class, use ExportToDWGBuilder

Created in NX9.0.0
ExportToDWGBuilder - Interface in nxopen.linedesigner: Represents a LineDesigner.ExportToDWG builder
To create a new instance of this class, use nxopen.linedesigner.LineDesignerManager#createExportToDwgBuilder
Default values.
ExportToDWGBuilder.SaveAsTypeAPI - Class in nxopen.linedesigner: This enum represents the dwg saving types
ExportToDWGBuilder.TemplateTypeAPI - Class in nxopen.linedesigner: This enum represents the dwg sheet template types
exportToFile(CaePart, String) - Method in interface nxopen.cae.PostProcessingSession: Exports the Post Processing Session to an external file
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
exportToFile(ExpressionCollection.ExportMode, String, ExpressionCollection.SortType) - Method in interface nxopen.ExpressionCollection: Exports the expressions to a text file, or, if 'file_name' is null, list the expressions in the listing window.
exportToggleState() - Method in interface nxopen.cam.ManageToolPartBuilder: Returns the export tool part toggle state
License requirements: None.
exportToInformationWindow() - Method in interface nxopen.assemblies.RelinkerBuilder: List all link information to the list window.
exportToMovie(String) - Method in interface nxopen.motion.PostProcess: Export to movie
License requirements: mechanisms ("MECHANISMS")
.
exportToPointXyValue(CamProfileBuilder) - Method in interface nxopen.mechatronics.SCOUTExportBuilder: Write elements to Generic XY point.
exportToProductVision(String, UFMotion.PvExportType) - Method in interface nxopen.uf.UFMotion: Refer to UF_MOTION_export_to_product_vision for documentation.
exportToScout(Builder) - Method in interface nxopen.mechatronics.SCOUTExportBuilder: Write elements to SCOUT 44.
exportToScoutWithFormula(CamProfileBuilder) - Method in interface nxopen.mechatronics.SCOUTExportBuilder: Write elements to SCOUT with more traverses type.
exportToSolver() - Method in interface nxopen.cae.SurfaceCoatBuilder: Returns the export to solver toggle
License requirements: None.
exportToSpreadsheet() - Method in interface nxopen.motion.LoadTransferControl: Exports load transfer details to spreadsheet
License requirements: mechanisms ("MECHANISMS")
.
exportToTxt(String) - Method in interface nxopen.mechatronics.PhysicsManager: Export MCD Signals to txt file
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
exportToXML(NXObject) - Method in interface nxopen.features.shipdesign.ManufacturingAssemblyNavigatorBuilder: Export the assembly structure to an XML file
License requirements: nx_ship_mfg_prep ("Ship Manufacturing")
.
exportToXMLFile(String) - Method in interface nxopen.display.IrayPlusMaterialEditorBuilder: Exports current material of material editor builder into a XML file.
exportUdf(String[], String[], int, UFModl.FeatureSigns) - Method in interface nxopen.uf.UFModlGeneral: Refer to UF_MODL_export_udf for documentation.
exportUnvFromProbe(String, ResultProbe[]) - Method in interface nxopen.cae.ResultManager: Exports Results from ResultProbe in UNV file format.
ExportWeldBuilder - Interface in nxopen.weld: Represents a ExportWeldBuilder class
To create a new instance of this class, use WeldManager.createExportWeldBuilder()
Default values.
ExportWeldBuilder.AttributeOriginType - Class in nxopen.weld: the Attribute Origin enum
ExportWeldBuilder.OutputType - Class in nxopen.weld: the Output Type enum
ExportWeldJointBuilder - Interface in nxopen.weld: Represents exporting weld joints.
exportWindowsMetafile(UFDisp.WmfOutput, String) - Method in interface nxopen.uf.UFDisp: Refer to UF_DISP_export_windows_metafile for documentation.
exportWithOptions(String, int, Tag[], UFPart.ExportOptions) - Method in interface nxopen.uf.UFPart: Refer to UF_PART_export_with_options for documentation.
ExportWorksetForReferenceBuilder - Interface in nxopen.pdm: Represents a builder class that performs Create operations
To create a new instance of this class, use PdmSession.createExportWorksetForReferenceBuilder(nxopen.BasePart)

Created in NX10.0.0
exportXMLButton() - Method in interface nxopen.display.IrayPlusSimpleMaterialEditorBuilder: To export to a XML file
License requirements: studio_render ("UG STUDIO RENDER")
.
exportXmlFile(String) - Method in interface nxopen.routing.RouteManager: Exports all of the NX Routing electrical information from the currently open part to the given XML file.
exportZoneInformation(String) - Method in interface nxopen.cae.Laminate: Export zone information to a CSV file.
exportZoneInformation(String) - Method in interface nxopen.cae.LaminateGlobalLayupMgr: Export zone information to a CSV file.
exportZonesAsGroups(Laminate.ZoneType, int) - Method in interface nxopen.cae.Laminate: For each zone in the current laminate physical property, create an element group
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
exportZonesAsGroups() - Method in interface nxopen.cae.LaminateGlobalLayupMgr: For each zone of each Laminate in the model, create an element group
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")

Created in NX7.5.2
exportZonesAsLaminates(Laminate.ZoneType, int) - Method in interface nxopen.cae.Laminate: For each zone in the current laminate physical property, create an equivalent laminate physical property
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
exportZonesAsLaminates() - Method in interface nxopen.cae.LaminateGlobalLayupMgr: For each zone of each Laminate in the model, create an equivalent laminate physical property
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")

Created in NX7.5.2
EXPOSE_BODY - Static variable in class nxopen.features.CopyPasteBuilder.BuilderVersion: Value of version which exposes additional target body parent; It should be added since NX8.5.
EXPOSE_ONFLY_SO - Static variable in class nxopen.features.CopyPasteBuilder.BuilderVersion: Value of version which exposes smart object created on fly as part of the copy operation; It should be set since NX8.0.
EXPR_IN_USE - Static variable in class nxopen.uf.UFConstants
expression() - Method in interface nxopen.ame.ExtractAttributeRelativeBuilder: Returns the expression for the relative formula
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
expression - Variable in class nxopen.assemblies.ClearanceAnalysisBuilder.PairClearanceZoneData: the corresponding expression
expression() - Method in interface nxopen.AttributePropertiesBaseBuilder: Returns the expression referenced from this attribute.
expression() - Method in interface nxopen.drawings.ViewScaleBuilder: Returns the scale expression
License requirements: None.
EXPRESSION - Static variable in class nxopen.drawings.ViewScaleBuilder.Type: determine scale from expression
Expression - Interface in nxopen: Represents an expression.
EXPRESSION - Static variable in class nxopen.Expression.UnitsOption: Return expression value in expression units.
EXPRESSION - Static variable in class nxopen.features.CustomAttribute.Type: Expression.
EXPRESSION - Static variable in class nxopen.features.PartGeometryCopyBuilder.Type: Expression
expression() - Method in interface nxopen.features.PartGeometryCopySelectBuilder: Returns the expression
License requirements: None.
expression() - Method in interface nxopen.features.RPODimension: Returns the expression of the dimension.
expression() - Method in interface nxopen.features.UserDefinedFeatureExpressionData: Returns the expression of the user defined feature
License requirements: None.
expression() - Method in interface nxopen.geometricutilities.OnPathDimensionBuilder: Returns the expression for the value of the dimension
License requirements: None.
expression() - Method in interface nxopen.IPlane: Returns the plane expression.
EXPRESSION - Static variable in class nxopen.motion.AnalyticalContactPropertyBuilder.DampingType
EXPRESSION - Static variable in class nxopen.motion.AnalyticalContactPropertyBuilder.FrictionCoefficientType
EXPRESSION - Static variable in class nxopen.motion.AnalyticalContactPropertyBuilder.StiffnessType
expression() - Method in interface nxopen.motion.ExpressionFunctionBuilder: Returns the Expression of this block
License requirements: mechanisms ("MECHANISMS")
.
EXPRESSION - Static variable in class nxopen.motion.ExpressionFunctionBuilder.Type
EXPRESSION - Static variable in class nxopen.motion.JointDefine.ScrewJointRatioType: Expression type
EXPRESSION - Static variable in class nxopen.motion.LinkCouplerCoupleBuilder.ScaleChoices: Expression
expression - Variable in class nxopen.NXObject.AttributeInformation: The expresssion referenced by the attribute (only supported if the referenceValue is null)
EXPRESSION - Static variable in class nxopen.optimization.DesignStudyBuilder.DesignStudyAttributeType: Expression type
EXPRESSION - Static variable in class nxopen.optimization.OptimizationBuilder.OptimizationAttributeType: Expression attribute
EXPRESSION - Static variable in class nxopen.partfamily.FamilyAttribute.AttrType: expression attribute
expression() - Method in interface nxopen.positioning.Constraint: Returns the Expression of a constraint.
expression() - Method in interface nxopen.PositioningDimension: Returns the expression for the dimension.
EXPRESSION - Static variable in class nxopen.preferences.SketchPreferences.DimensionLabelType: Displays the entire expression such as P2=P3*4
expression() - Method in interface nxopen.routing.RoutePartDescriptor: Returns the expression for the part descriptor used by Routing.
EXPRESSION - Static variable in class nxopen.routing.RoutePartDescriptor.SourceType
EXPRESSION - Static variable in class nxopen.routing.SplinePathBuilder.SplinePathRadiusSource: Specify radius by value.
EXPRESSION - Static variable in class nxopen.tooling.SpreadsheetData.KeywordType: Expression defined in spreadsheet
expression - Variable in class nxopen.uf.UFGdt.ProjZone
expression - Variable in class nxopen.uf.UFGdt.ToleranceValue
expression - Variable in class nxopen.uf.UFGdt.ToleranceZone
expression - Variable in class nxopen.uf.UFModlGeneral.AskUdfDefinitionData
Expression.InterpartExpressionNamesData - Class in nxopen: This class holds the data returned from Expression.getInterpartExpressionNames()
Expression.UnitsOption - Class in nxopen: Indicates the units to use when getting an expression's value.
EXPRESSION_AND_FUNCTION - Static variable in class nxopen.motion.AnalyticalContactPropertyBuilder.DampingType
EXPRESSION_AND_FUNCTION - Static variable in class nxopen.motion.AnalyticalContactPropertyBuilder.StiffnessType
EXPRESSION_AND_PROFILE - Static variable in class nxopen.motion.AnalyticalContactPropertyBuilder.DampingType
EXPRESSION_AND_PROFILE - Static variable in class nxopen.motion.AnalyticalContactPropertyBuilder.StiffnessType
EXPRESSION_AND_PROFILE2D - Static variable in class nxopen.motion.ConnectorCoefficientTypes: expression and 2D profile
EXPRESSION_AND_PROFILE3D - Static variable in class nxopen.motion.ConnectorCoefficientTypes: expression and 3D profile
EXPRESSION_AND_SPLINE - Static variable in class nxopen.motion.ConnectorCoefficientTypes: expression and function
EXPRESSION_TYPE - Static variable in class nxopen.Part.PartFamilyAttrType: Deprecated.

expression attribute
EXPRESSION_VLA - Static variable in class nxopen.features.CustomAttribute.Type: Expression variable length array.
ExpressionBlock - Interface in nxopen.blockstyler: Represents an Expression block .
ExpressionBlockBuilder - Interface in nxopen.mechatronics: Represents a ExpressionBlockBuilder builder.
ExpressionBlockBuilder.DataType - Class in nxopen.mechatronics: Represents the data type.
ExpressionBlockBuilder.Slot - Class in nxopen.mechatronics: Represents Slot definition structure.
ExpressionBlockBuilder.SlotType - Class in nxopen.mechatronics: Represents the Slot type.
ExpressionBlockCollection - Interface in nxopen.mechatronics: Represents a collection of ExpressionBlockObject.
ExpressionBlockFormula - Interface in nxopen.mechatronics: Represents the ExpressionBlockFormula class
To create or edit an instance of this class, use ExpressionBlockFormulaBuilder

Created in NX11.0.0
ExpressionBlockFormulaBuilder - Interface in nxopen.mechatronics: Represents a ExpressionBlockFormulaBuilder .
ExpressionBlockFormulaCollection - Interface in nxopen.mechatronics: Represents a collection of ExpressionBlock Formula.
expressionBlockFormulas() - Method in interface nxopen.mechatronics.PhysicsManager: Returns the ExpressionBlockFormulaCollection belonging to this part
Created in NX11.0.0
ExpressionBlockObject - Interface in nxopen.mechatronics: Represents the ExpressionBlockObject class ExpressionBlockObject encapsulates all related expressions that work for same task.
expressionBlocks() - Method in interface nxopen.mechatronics.PhysicsManager: Returns the ExpressionBlockCollection belonging to this part
Created in NX11.0.0
ExpressionCollection - Interface in nxopen: Represents a collection of expressions.
ExpressionCollection.ExportMode - Class in nxopen: Indicates the mode for exporting expressions.
ExpressionCollection.ImportFromFileData - Class in nxopen: This class holds the data returned from ExpressionCollection.importFromFile(java.lang.String, nxopen.ExpressionCollection.ImportMode)
ExpressionCollection.ImportMode - Class in nxopen: Indicates the mode for importing expressions.
ExpressionCollection.InterpartReferencesFor4gdData - Class in nxopen: This class holds the data returned from ExpressionCollection.getInterpartReferencesFor4gd()
ExpressionCollection.InterpartReferencesWithDisplayNamesData - Class in nxopen: This class holds the data returned from ExpressionCollection.getInterpartReferencesWithDisplayNames()
ExpressionCollection.SortType - Class in nxopen: Indicates the mode for sorting expressions.
ExpressionCollectorSet - Interface in nxopen: An object that binds an expression with an entity section in the context of a list.
ExpressionCollectorSetList - Interface in nxopen: Represents a list of objects.
expressionDriven() - Method in interface nxopen.positioning.Constraint: Returns the driven state of the expression of a constraint.
expressionDuration() - Method in interface nxopen.mechatronics.GanttOperationBuilder: Returns the operation duration expression
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
ExpressionEvaluator - Interface in nxopen.ame: Represents an Expression Evaluator
This object does not need a creator.
expressionForScale() - Method in interface nxopen.drawings.GeneralViewStyle: Returns the expression for scale
License requirements: drafting ("DRAFTING")
.
ExpressionFunctionBuilder - Interface in nxopen.motion: Represents a ExpressionFunctionBuilder builder .
ExpressionFunctionBuilder.Type - Class in nxopen.motion: The block type can be Expression when a constant expression is used or Function when a spline curve is used or Profile when a profile is used.
ExpressionGroup - Interface in nxopen: Represents an expression group.
ExpressionGroupCollection - Interface in nxopen: Represents a collection of expressions groups.
expressionGroups() - Method in interface nxopen.BasePart: Returns the ExpressionCollection instance belonging to this part .
expressionList() - Method in interface nxopen.geometricutilities.PartModuleReferencesBuilder: Returns the expressions for part module input/output
License requirements: None.
expressionMass() - Method in interface nxopen.cae.LumpedMassEADBuilder: Returns the expression mass operator gets LumpedMass mass value
License requirements: nx_masterfem ("Finite Element Modeling")
.
expressionMass() - Method in interface nxopen.cae.Mesh0dBuilder: Returns the mass expression of the lumped mass element
License requirements: nx_masterfem ("Finite Element Modeling")
.
expressionMasterMultiple() - Method in interface nxopen.mechatronics.GearBuilder: Returns the master multiple expression.
expressionMasterMultiple() - Method in interface nxopen.mechatronics.ThreeJointCouplerBuilder: Returns the master multiple expression.
expressionMode() - Method in interface nxopen.annotations.DrivingValueBuilder: Returns the expression mode
License requirements: None.
expressionMode - Variable in class nxopen.uf.UFPart.ExportOptions
expressionName() - Method in interface nxopen.annotations.DrivingValueBuilder: Returns the expression name
License requirements: None.
expressionName() - Method in interface nxopen.formboard.PathLengthAnnotationBuilder: Returns the expression name
License requirements: routing_harness ("Routing Harness")
.
expressionObject() - Method in interface nxopen.blockstyler.AngularDimension: Returns the ExpressionObject
License requirements: None.
expressionObject() - Method in interface nxopen.blockstyler.ExpressionBlock: Returns the ExpressionObject
License requirements: None.
expressionObject() - Method in interface nxopen.blockstyler.LinearDimension: Returns the ExpressionObject
License requirements: None.
expressionObject() - Method in interface nxopen.blockstyler.OnPathDimension: Returns the ExpressionObject
License requirements: None.
expressionObject() - Method in interface nxopen.blockstyler.RadiusDimension: Returns the ExpressionObject
License requirements: None.
expressionOption() - Method in interface nxopen.features.CopyPasteBuilder: Returns the expression option
License requirements: None.
expressionOption() - Method in interface nxopen.features.PatternFeatureBuilder: Returns the expression transfer option
License requirements: None.
expressionOption() - Method in interface nxopen.SketchDimensionBuilder: Returns the expression option
License requirements: None.
expressionPrompt - Variable in class nxopen.uf.UFModlGeneral.AskUdfDefinitionData
expressionPrompts - Variable in class nxopen.uf.UFAssem.DeformedDefinitionData
expressionRatio() - Method in interface nxopen.mechatronics.ScrewJointBuilder: Returns a value that indicates ratio value for the screw joint.
expressions() - Method in interface nxopen.BasePart: Returns the ExpressionCollection instance belonging to this part .
EXPRESSIONS - Static variable in class nxopen.Information.DisplayFeatureType: Displays expressions information.
expressions - Variable in class nxopen.uf.UFAssem.DeformedDefinitionData
expressions - Variable in class nxopen.uf.UFModl.ComparePartEntitiesData
expressions - Variable in class nxopen.uf.UFModl.ComparePartEntitiesData3
ExpressionsData() - Constructor for class nxopen.InterpartExpressionsBuilder.ExpressionsData
ExpressionSectionSet - Interface in nxopen: An object that binds an expression with an entity section in the context of a list.
ExpressionSectionSetList - Interface in nxopen: Represents a list of objects.
expressionSlaveMultiple() - Method in interface nxopen.mechatronics.GearBuilder: Returns the slave multiple expression.
expressionSlaveMultiple() - Method in interface nxopen.mechatronics.ThreeJointCouplerBuilder: Returns the slave multiple expression.
expressionSortTypeAsString() - Method in interface nxopen.blockstyler.ChooseExpression: Returns the ExpressionSortType as string
License requirements: None.
expressionStatureData() - Method in interface nxopen.features.HumanBuilder: Returns the human stature data using expression
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
expressionsWithWarnings - Variable in class nxopen.uf.UFAssem.DeformPartWarnings
expressionTags - Variable in class nxopen.uf.UFSket.AskExpsOfSketchData
expressionThirdJointMultiple() - Method in interface nxopen.mechatronics.ThreeJointCouplerBuilder: Returns the third joint multiple expression.
expressionTypeIndexAsString() - Method in interface nxopen.blockstyler.ChooseExpression: Returns the ExpressionTypeIndex as string
License requirements: None.
expressionValue() - Method in interface nxopen.annotations.DrivingValueBuilder: Returns the expression value
License requirements: None.
expressionValue() - Method in interface nxopen.mechatronics.GanttOperationConditionBuilder: Returns the expression value for double and interger parameters
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
expressionValue() - Method in interface nxopen.mechatronics.GanttOperationParameterBuilder: Returns the expression value for double and interger parameters
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
expressionWeightData() - Method in interface nxopen.features.HumanBuilder: Returns the human weight data using expression
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
exps - Variable in class nxopen.uf.UFModlGeneral.AskExpDescOfFeatData
exps - Variable in class nxopen.uf.UFModlGeneral.AskExpDescOfFrecData
exps - Variable in class nxopen.uf.UFModlGeneral.AskExpsOfFeatureData
exps - Variable in class nxopen.uf.UFModlGeneral.AskExpsOfPartData
exps - Variable in class nxopen.uf.UFModlGeneral.AskRpoDescOfFeatData
exps - Variable in class nxopen.uf.UFModlGeneral.AskRpoDescOfFrecData
expString - Variable in class nxopen.uf.UFSket.AskDimStatusData
expTag - Variable in class nxopen.uf.UFDraw.AskViewParmScaleData
expTag - Variable in class nxopen.uf.UFDraw.AskViewScaleData
expTag - Variable in class nxopen.uf.UFGexp.CreateAngleData
expTag - Variable in class nxopen.uf.UFGexp.CreateDistanceData
expTag - Variable in class nxopen.uf.UFGexp.CreateLengthData
expTag - Variable in class nxopen.uf.UFModlGeneral.DissectExpStringData
expTag - Variable in class nxopen.uf.UFSket.AskDimStatusData
expTag - Variable in class nxopen.uf.UFSket.ReadDimensionalConstraintData
expTags - Variable in class nxopen.uf.UFUi.SelectParametersData
expTags - Variable in class nxopen.uf.UFUi.SelectRpoDimensionsData
expTags - Variable in class nxopen.uf.UFUi.SelectSketchDimensionsData
extData - Variable in class nxopen.uf.UFModl.AskLinkedExteriorData
extdirection - Variable in class nxopen.routing.SplinePathBuilder.ExtensionDataForPointAtIndexData: Extension direction.
extDist1() - Method in interface nxopen.tooling.ProfileSplitBuilder: Returns the extruded start distance
License requirements: None.
extDist2() - Method in interface nxopen.tooling.ProfileSplitBuilder: Returns the extruded end distance
License requirements: None.
EXTEND - Static variable in class nxopen.cam.BoundaryMemberSet.ConnectMemberType: extend
EXTEND - Static variable in class nxopen.cam.BoundaryTurnMemberSet.ConcaveCornersTypeValue
EXTEND - Static variable in class nxopen.cam.CornerControlBuilder.CornerControlMethods: Extend
extend() - Method in interface nxopen.cam.ToolPathEditorBuilder: Extend
License requirements: cam_base ("CAM BASE")
.
extend() - Method in interface nxopen.die.QuickBinderBuilder: Returns the value to extend both sides of a face.
EXTEND - Static variable in class nxopen.EndCutBlockBuilder.TaperTypeOption
EXTEND - Static variable in class nxopen.features.MoveEdgeBuilder.EndFaceBehaviorType
EXTEND - Static variable in class nxopen.features.OffsetEdgeBuilder.EndFaceBehaviourType
EXTEND - Static variable in class nxopen.features.shipdesign.EndCutBuilder.DraftTypes: If this Draft Type is set, the EndCut face will split and the right side face will be tapered.
Extend - Interface in nxopen.geometricutilities: Represents an extend data.
extend() - Method in interface nxopen.tooling.BendInsertDesignBuilder: Returns the extend.
Extend.ExtendType - Class in nxopen.geometricutilities: This enum represents the type of extend
EXTEND_AND_TRIM - Static variable in class nxopen.cam.CornerControlBuilder.CornerControlMethods: Extend and Trim
EXTEND_AND_TRIM - Static variable in class nxopen.cam.NcmPlanarEngRetBuilder.MinClearanceTypes: Extend and trim
EXTEND_AND_TRIM - Static variable in class nxopen.cam.WedmGeomBuilder.ConvexCornerTypes: extend tangents
EXTEND_AND_TRIM - Static variable in class nxopen.cam.WedmOperationBuilder.ConvexCornerTypes: extend tangents
EXTEND_BOTH_TRIM_FACES - Static variable in class nxopen.uf.UFModl.SweepTrimOpts
EXTEND_CAP_FACE - Static variable in class nxopen.geometricutilities.FaceChangeOverflowBehavior.Option: Extend Cap Face
EXTEND_CHANGE_FACE - Static variable in class nxopen.geometricutilities.FaceChangeOverflowBehavior.Option: Extend Change Face
EXTEND_CIRCULAR - Static variable in class nxopen.uf.UFCurve.TrimOpts
EXTEND_CURVE_AND_CREATE_BOX - Static variable in class nxopen.tooling.SpecialFormingBuilder.Types
EXTEND_FIRST_TRIM_FACE - Static variable in class nxopen.uf.UFModl.SweepTrimOpts
EXTEND_INCIDENT_FACE - Static variable in class nxopen.geometricutilities.FaceChangeOverflowBehavior.Option: Extend Incident Face
EXTEND_LINEAR - Static variable in class nxopen.uf.UFCurve.TrimOpts
EXTEND_NATURAL - Static variable in class nxopen.uf.UFCurve.TrimOpts
EXTEND_NEIGHBORSAT_SMOOTH_EDGE - Static variable in class nxopen.geometricutilities.StepOptionBehavior.StepOptionType: Extends faces neighboring a smooth edge of the motion face.
EXTEND_NONE - Static variable in class nxopen.uf.UFCurve.TrimOpts
EXTEND_ONLY - Static variable in class nxopen.cam.NcmPlanarEngRetBuilder.MinClearanceTypes: Extend only
EXTEND_ORIGINAL_SHEET - Static variable in class nxopen.features.ExtendSheetBuilder.BodyOutput
EXTEND_SECOND_TRIM_FACE - Static variable in class nxopen.uf.UFModl.SweepTrimOpts
EXTEND_TANGENTS - Static variable in class nxopen.cam.TurnConcaveCornerControl.Types: Concave Corner Control Type is Extend.
EXTEND_TANGENTS - Static variable in class nxopen.cam.TurnCornerControl.Types: Corner Control Types is Extend Tangents.
EXTEND_TANGENTS - Static variable in class nxopen.features.OffsetCurveBuilder.TrimOption: Extend Tangents
EXTEND_TO_REGION - Static variable in class nxopen.cam.CutParametersToolRunOffTypes: Extend To Region
EXTEND_UMAXIMUM - Static variable in class nxopen.die.QuickBinderBuilder.EditTypes: Extend the U Maximum edge of the anchor face.
EXTEND_UMINIMUM - Static variable in class nxopen.die.QuickBinderBuilder.EditTypes: Extend the U Minimum edge of the anchor face.
EXTEND_VMAXIMUM - Static variable in class nxopen.die.QuickBinderBuilder.EditTypes: Extend the V Maximum edge of the anchor face.
EXTEND_VMINIMUM - Static variable in class nxopen.die.QuickBinderBuilder.EditTypes: Extend the V Minimum edge of the anchor face.
extendAcrossUndercut() - Method in interface nxopen.cam.MillCutParameters: Returns the extend across undercut toggle
License requirements: cam_base ("CAM BASE")
.
extendAfterArc() - Method in interface nxopen.cam.NcmPlanarEngRetBuilder: Returns the linear extension after arc engage/retract
License requirements: None.
extendAfterArc() - Method in interface nxopen.cam.NcmScEngRetBuilder: Returns the linear extension after arc engage/retract
License requirements: None.
extendAngle() - Method in interface nxopen.cam.CircularAboutAxisMoveBuilder: Returns the extend angle
License requirements: None.
EXTENDAS_NEW_FACE - Static variable in class nxopen.features.ExtendSheetBuilder.BodyOutput
EXTENDAS_NEW_SHEET - Static variable in class nxopen.features.ExtendSheetBuilder.BodyOutput
extendAtConvexCorner() - Method in interface nxopen.cam.ToolAxisChange: Returns the extend at convex corner toggle
License requirements: None.
ExtendAtEdges - Interface in nxopen.cam: Represents a ExtendAtEdges
Created in NX6.0.0
extendAtEdges() - Method in interface nxopen.cam.MillCutParameters: Returns the Extend At Edges
License requirements: None.
extendAtStart() - Method in interface nxopen.cam.TurnCutParameters: Returns the Corner Start Extension
License requirements: None.
extendBeforeArc() - Method in interface nxopen.cam.NcmPlanarEngRetBuilder: Returns the linear extension before arc engage/retract
License requirements: None.
extendBeforeArc() - Method in interface nxopen.cam.NcmScEngRetBuilder: Returns the linear extension before arc engage/retract
License requirements: None.
extendBendRelief() - Method in interface nxopen.features.sheetmetal.BendOptions: Returns the option to extend the bend relief if required.
extendBound() - Method in interface nxopen.SketchQuickExtendBuilder: Returns the flag to control the ability to extend to extension of the boundary
License requirements: None.
extendBound() - Method in interface nxopen.SketchQuickTrimBuilder: Returns the flag to control the ability to trim to extension of the boundary
License requirements: None.
extendBoundaryObject() - Method in interface nxopen.features.TrimSheetBuilder: Returns the extend boundary object to target laminar edges
License requirements: None.
extendChannel() - Method in interface nxopen.tooling.CoolingExtendBuilder: Returns the cooling channel to be extended.
extendCurveFaceEdges(boolean) - Method in interface nxopen.tooling.ReusePositioningObjectBuilder: Extend curve status accroding to the extend option
License requirements: None.
extendData() - Method in interface nxopen.die.AddendumSectionBuilder: Returns the object used to extend the constraint curve which is accessed via AddendumSectionBuilder.constraintCurve() .
extendDirection() - Method in interface nxopen.cam.ToolPathEditorBuilder: Returns the extend direction
License requirements: None.
extendDistance() - Method in interface nxopen.cam.CircularAboutAxisMoveBuilder: Returns the extend distance
License requirements: None.
extendDistance() - Method in interface nxopen.cam.InitialProfilePlunge: Returns the extend distance
License requirements: None.
extendDistance() - Method in interface nxopen.cam.NcmLaserEngage: Returns the Extend Distance
License requirements: None.
extendDistance() - Method in interface nxopen.cam.NcmLaserRetract: Returns the Extend Distance
License requirements: None.
extendDistance() - Method in interface nxopen.cam.TrimPoint: Returns the trim point extend distance
License requirements: None.
extendDistance() - Method in interface nxopen.cam.TurnEngageRetractBuilder: Returns the Extend Distance
License requirements: None.
extendDistance() - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder: Returns the extend distance for creating parting surface.
extendDistance() - Method in interface nxopen.weld.WeldFillBuilder: Returns the distance to extend a strip.
EXTENDED - Static variable in class nxopen.die.OutputCurvesBuilder.TrimCurveTypes: extended trim curve.
extendedCurves() - Method in interface nxopen.SketchQuickExtendBuilder: Returns the extended curves
License requirements: None.
extendEdges() - Method in interface nxopen.weld.FilletBuilder: Returns the value for how to populate the edge sets.
extendEdgeToBoundaryToggle() - Method in interface nxopen.cae.EdgeFaceImprintBuilder: Returns the stitch toggle state
License requirements: None.
extendedText() - Method in interface nxopen.annotations.CompoundDatumReferenceBuilder: Returns the compound datum reference extended text builder
License requirements: None.
extendedTicBegin() - Method in interface nxopen.annotations.FrameBarElementStyleBuilder: Returns the extended tic from which display to be started
License requirements: None.
extendedTicColor() - Method in interface nxopen.annotations.FrameBarElementStyleBuilder: Returns the extended tic color
License requirements: None.
extendedTicFont() - Method in interface nxopen.annotations.FrameBarElementStyleBuilder: Returns the extended tic font
License requirements: None.
extendedTicFrequency() - Method in interface nxopen.annotations.FrameBarElementStyleBuilder: Returns the extended tic display frequency
License requirements: None.
extendedTicLength() - Method in interface nxopen.annotations.FrameBarElementStyleBuilder: Returns the extended tic length
License requirements: None.
extendedTicWidth() - Method in interface nxopen.annotations.FrameBarElementStyleBuilder: Returns the extended tic width
License requirements: None.
extendEndDistance() - Method in interface nxopen.die.AddendumSectionBuilder: Returns the distance to extend the end of the constraint curve.
extendEndFace() - Method in interface nxopen.features.shipdesign.ExcessMaterialBuilder: Returns the extend end side face option (not applicable for fitup)
License requirements: None.
extender() - Method in interface nxopen.features.FitCurveBuilder: Returns the extension option
License requirements: None.
extender() - Method in interface nxopen.features.GeneralConicBuilder: Returns the extension option
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.
extender() - Method in interface nxopen.features.StudioSplineBuilderEx: Returns the extension option
License requirements: None.
extendFactor() - Method in interface nxopen.features.OffsetCurveBuilder: Deprecated.
Deprecated in NX11.0.0. Extend factor functionality is no longer supported.
extendFlange() - Method in interface nxopen.features.SilhouetteFlangeBuilder: Returns a value that indicates whether to extend flange until the boundary edges of the base faces.
extendFloorTo() - Method in interface nxopen.cam.MillCutParameters: Returns the extend floor to
License requirements: None.
extendGuideCurve() - Method in interface nxopen.cam.GuidedCurveBuilder: Returns the Extend Curve to cut area boundaries
License requirements: None.
extendImprints() - Method in interface nxopen.features.shipdesign.DivideBuilder: Returns the option to extend imprints.
extendImprints() - Method in interface nxopen.features.shipdesign.PlateDivideBuilder: Returns the option to extend imprints.
extendImprints() - Method in interface nxopen.features.shipdesign.ShipPreparationInfo: Returns the option to extend the imprints.
extendLength() - Method in interface nxopen.features.GuidedExtensionBuilderEx: Returns the extend length for use in creating the guided extension surfaces
License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_2 ("advanced freeform modeling") OR ug_mold_design ("UG MOLD") OR die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
extendLength() - Method in interface nxopen.tooling.GuidedExtensionBuilder: Returns the extend length for use in creating the guided extension surfaces
License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_2 ("advanced freeform modeling") OR ug_mold_design ("UG MOLD") OR die_engineering ("DIE ENGINEERING")
.
extendMethod() - Method in interface nxopen.cam.ToolPathEditorBuilder: Returns the extend method
License requirements: None.
extendMethod() - Method in interface nxopen.cam.TurnEngageRetractBuilder: Returns the Extend Method
License requirements: None.
extendMethod() - Method in interface nxopen.features.AOCSBuilder: Returns the extend method option for the AOCS operation.
extendMethod() - Method in interface nxopen.weld.WeldPointBuilder: Returns the offset curve extend method.
extendMode() - Method in interface nxopen.cam.RoughFinishTurningBuilder: Returns the Extend Mode
License requirements: None.
extendNewFace() - Method in interface nxopen.features.TrimExtendBuilder: Returns the extend new face to keep the original edges on the target or tool geometry
License requirements: None.
extendOffset() - Method in interface nxopen.weld.JointmarkGuideBuilder: Returns the extend offset.
extendOption() - Method in interface nxopen.features.DividefaceBuilder: Returns the Extend resulting edges to boundary
License requirements: None.
extendOrTrimEndPoint(double) - Method in interface nxopen.cam.BoundarySetPlanarMill: Trim or extend the end point of a closed boundary
License requirements: cam_base ("CAM BASE")
.
extendOrTrimStartPoint(double) - Method in interface nxopen.cam.BoundarySetPlanarMill: Trim or extend the start point of an open boundary
License requirements: cam_base ("CAM BASE")
.
extendProfile() - Method in interface nxopen.features.sheetmetal.BendBuilder: Returns the Extend Option
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
extendProfile() - Method in interface nxopen.features.sheetmetal.JogBuilder: Returns
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
extendRadialDistance() - Method in interface nxopen.cam.BladeEdge: Returns the Radial Extension
License requirements: None.
ExtendSheet - Interface in nxopen.features: Represents an extend sheet feature
To create or edit an instance of this class, use ExtendSheetBuilder

Created in NX9.0.0
ExtendSheetBuilder - Interface in nxopen.features: Represents a ExtendSheet builder
To create a new instance of this class, use TrimFeatureCollection.createExtendSheetBuilder(nxopen.features.ExtendSheet)
Default values.
ExtendSheetBuilder.BodyOutput - Class in nxopen.features: Creates extension as an existing or a new entity
ExtendSheetBuilder.Limit - Class in nxopen.features: Determines the Limit type for extension
ExtendSheetBuilder.SideEdgeShape - Class in nxopen.features: Determines the path of the extension
ExtendSheetBuilder.SurfaceShape - Class in nxopen.features: Determines the surface type of the extension
extendStartDistance() - Method in interface nxopen.die.AddendumSectionBuilder: Returns the distance to extend the start of the constraint curve.
extendStartFace() - Method in interface nxopen.features.shipdesign.ExcessMaterialBuilder: Returns the extend start side face option (not applicable for fitup)
License requirements: None.
extendSurface() - Method in interface nxopen.features.vehicledesign.GroundClearanceBuilder: Returns the indication if use surface extension.
extendTangentialDistance() - Method in interface nxopen.cam.BladeEdge: Returns the Tangential Extension
License requirements: None.
EXTENDTO_NEXT - Static variable in class nxopen.features.StepBuilder.StepWallMethods: Extends the wall face to intersect the next face
EXTENDTO_SELECTED - Static variable in class nxopen.features.StepBuilder.StepWallMethods: Extends the wall face to a selected face
extendToBoundary() - Method in interface nxopen.cam.UpDownCutting: Returns the extend to boundary toggle
License requirements: cam_base ("CAM BASE")
.
extendToBoundary() - Method in interface nxopen.weld.WeldBeadBuilder: Returns the option to control if the bead guide curve should extend to the nearest face boundary.
extendToFaceEdgesOption() - Method in interface nxopen.tooling.ReusePositioningObjectBuilder: Returns the extend option for curve operation.
extendToFaceOption() - Method in interface nxopen.features.AOCSBuilder: Returns the span option for the AOCS operation.
extendToPart() - Method in interface nxopen.cam.MillCutParameters: Returns the extend to part flag
License requirements: None.
extendType() - Method in interface nxopen.features.ExtensionBuilder: Returns the extend type
License requirements: None.
extendWalls() - Method in interface nxopen.cam.VolumeBased25DMillingOperationBuilder: Returns the extend walls flag
License requirements: None.
EXTENSION - Static variable in class nxopen.annotations.ArcComponent.ArcType: extension arc
extension() - Method in interface nxopen.annotations.Centerline2dSettingsBuilder: Returns the extension parameter for 2D Centerline
License requirements: None.
extension() - Method in interface nxopen.annotations.Centerline3dSettingsBuilder: Returns the extension parameter for 3D Centerline
License requirements: None.
extension() - Method in interface nxopen.annotations.CenterMarkSettingsBuilder: Returns the extension parameter for centerline
License requirements: None.
extension() - Method in interface nxopen.annotations.CircleCenterlineSettingsBuilder: Returns the extension parameter
License requirements: None.
extension() - Method in interface nxopen.annotations.IntersectionSymbolBuilder: Returns the extension
License requirements: None.
EXTENSION - Static variable in class nxopen.annotations.LeaderData.LeaderType: Id symbol extension style leader
EXTENSION - Static variable in class nxopen.annotations.LeaderType
EXTENSION - Static variable in class nxopen.annotations.LineComponent.LineType: extension line
extension() - Method in interface nxopen.annotations.OffsetCenterPointBuilder: Returns the extension
License requirements: None.
extension() - Method in interface nxopen.annotations.SymmetricalCenterlineSettingsBuilder: Returns the extension parameter for centerline
License requirements: None.
EXTENSION - Static variable in class nxopen.die.AddendumSectionBuilder.SectionShapeType: Section consists of a plus segment only.
Extension - Interface in nxopen.features: Represents a extension feature
To create or edit an instance of this class, use ExtensionBuilder

Created in NX8.0.0
EXTENSION - Static variable in class nxopen.features.PatchOpeningsBuilder.Types: Tangent edge extension method
extension() - Method in interface nxopen.features.shipdesign.InverseBendingLinesBuilder: Returns the extension added on each end of the profile.
EXTENSION - Static variable in class nxopen.SketchOffset.CapType: The cap type is curve extension
extension - Variable in class nxopen.uf.UFDrf.WeldSymbols
extension - Variable in class nxopen.uf.UFModl.RipedgeData
extension1() - Method in interface nxopen.drawings.BrokenViewBuilder: Returns the break line extension (top/right) beyond geometry
License requirements: None.
extension2() - Method in interface nxopen.drawings.BrokenViewBuilder: Returns the break line extension (bottom/left) beyond geometry
License requirements: None.
EXTENSION_LINE - Static variable in class nxopen.annotations.AssociativityLineOption: Extension line
EXTENSION_LINE - Static variable in class nxopen.uf.UFGdt.DatumAssocType
EXTENSION_LINE_TYPE - Static variable in class nxopen.uf.UFDrf.ObjectAssocLineType
EXTENSION_LINES - Static variable in class nxopen.uf.UFConstants
ExtensionAttributesData() - Constructor for class nxopen.die.ThroatChildBuilder.ExtensionAttributesData
ExtensionAttributesData() - Constructor for class nxopen.die.ThroatParentBuilder.ExtensionAttributesData
ExtensionBuilder - Interface in nxopen.features: Represents a Extension builder
To create a new instance of this class, use FeatureCollection.createExtensionBuilder(nxopen.features.Extension)
Default values.
ExtensionBuilder.Distance - Class in nxopen.features: The distance type.
ExtensionBuilder.Extension - Class in nxopen.features: The extension method.
ExtensionBuilder.Types - Class in nxopen.features: The part of the face to extend.
ExtensionDataForPointAtIndexData() - Constructor for class nxopen.routing.SplinePathBuilder.ExtensionDataForPointAtIndexData
extensiondir - Variable in class nxopen.routing.SplinePathBuilder.AssignTangentExtensionForPointAtIndexData: Direction object.
extensionDirection() - Method in interface nxopen.geometricutilities.CurveLengthData: Returns the extension direction
License requirements: solid_modeling ("SOLIDS MODELING")
.
ExtensionDirection - Class in nxopen.geometricutilities: This enum represents extension direction
extensionDistance() - Method in interface nxopen.die.SteelInsertSectionBuilder: Returns the extension distance
License requirements: ug_die_design ("Die Design")
.
extensionDistance() - Method in interface nxopen.die.SteelInsertSegmentChildBuilder: Returns the extension distance
License requirements: ug_die_design ("Die Design")
.
extensionDistance() - Method in interface nxopen.die.SteelInsertSegmentParentBuilder: Returns the extension distance
License requirements: ug_die_design ("Die Design")
.
extensionDistance() - Method in interface nxopen.weld.FilletBuilder: Returns the linear dimension extension distance.
extensionFactor() - Method in interface nxopen.features.vehicledesign.GroundClearanceBuilder: Returns the expression that contains the value which indicates the extension factor.
extensionHeight() - Method in interface nxopen.tooling.ElectrodeBlankBuilder: Returns the default extension height between head bodies and the blank.
extensionLength() - Method in interface nxopen.die.ThroatChildBuilder: Returns the tangent distance to add to the end of the flange.
extensionLineDisplay() - Method in interface nxopen.annotations.DimensionPreferences: Returns the extension line display
License requirements: None.
extensionLineDisplay() - Method in interface nxopen.annotations.DimensionStyleBuilder: Returns the extension line display option.
ExtensionLineDisplay - Class in nxopen.annotations: Specifies the extension line display option
extensionLineDisplay - Variable in class nxopen.uf.UFDrf.DimensionPreferences
extensionLineDisplay - Variable in class nxopen.uf.UFDrf.DimensionPreferences1
extensionMethod() - Method in interface nxopen.features.TrimExtendBuilder: Returns the trim extend extension method to specify the continuity of an extend operation
License requirements: None.
extensionMethod() - Method in interface nxopen.geometricutilities.CurveLengthData: Returns the total or incremental extension method
License requirements: solid_modeling ("SOLIDS MODELING")
.
ExtensionMethod - Class in nxopen.geometricutilities: This enum represents the extension method
extensionMethod() - Method in interface nxopen.weld.FilletBuilder: Returns the extension method.
extensionOption() - Method in interface nxopen.routing.ModelTerminalsBuilder: Returns the extension option
License requirements: routing_harness ("Routing Harness")
.
extensionSide() - Method in interface nxopen.geometricutilities.CurveLengthData: Returns the extension side option
License requirements: solid_modeling ("SOLIDS MODELING")
.
ExtensionSide - Class in nxopen.geometricutilities: This enum represents the extension side
extensionSolution() - Method in interface nxopen.tooling.CoolingDefineChannelBuilder: Returns the candidate extension types
License requirements: None.
extensionType() - Method in interface nxopen.die.SteelInsertSectionBuilder: Returns the extension type
License requirements: ug_die_design ("Die Design")
.
extensionType() - Method in interface nxopen.die.SteelInsertSegmentChildBuilder: Returns the extension type
License requirements: ug_die_design ("Die Design")
.
extensionType() - Method in interface nxopen.die.SteelInsertSegmentParentBuilder: Returns the extension type
License requirements: ug_die_design ("Die Design")
.
extensionType() - Method in interface nxopen.features.EnlargeBuilder: Returns the extension type
License requirements: nx_freeform_2 ("advanced freeform modeling")
.
extensionValue() - Method in interface nxopen.tooling.CoolingExtendBuilder: Returns the value of the face extension
License requirements: None.
extensionVector() - Method in interface nxopen.mechanicalrouting.PathTransitionBuilder: Returns the direction for extension segments.
extentCurve() - Method in interface nxopen.features.GeodesicTrimBuilder: Returns the extent curve defines the region to be removed from the curve
License requirements: None.
ExtentData() - Constructor for class nxopen.display.PlanarShipGridBuilder.ExtentData
Extents() - Constructor for class nxopen.uf.UFPlot.Extents
Extents(double, double, double, double) - Constructor for class nxopen.uf.UFPlot.Extents
extentType() - Method in interface nxopen.cam.InspectionConeFeatureBuilder: Returns the extent type
License requirements: None.
extentType() - Method in interface nxopen.cam.InspectionCylinderFeatureBuilder: Returns the extent type
License requirements: None.
extentType() - Method in interface nxopen.cam.InspectionLineFeatureBuilder: Returns the extent type of the line (bounded or unbounded)
License requirements: None.
extentType() - Method in interface nxopen.cam.InspectionParplnFeatureBuilder: Returns the extent type of the slot/tab (bounded or unbounded)
License requirements: None.
extentType() - Method in interface nxopen.cam.InspectionPlaneFeatureBuilder: Returns the extent type
License requirements: None.
EXTERIOR - Static variable in class nxopen.cae.ModelDisplayBuilder.NodeMeshShowHideOptionType: Exterior
EXTERIOR - Static variable in class nxopen.die.MachineReliefBuilder.MainProfileTypes: Profile is for the exterior surface of the main wall.
EXTERIOR_CURVES - Static variable in class nxopen.preferences.PartFlexiblePrintedCircuitDesign.FlatPatternObjectType
EXTERIOR_CURVES - Static variable in class nxopen.preferences.PartSheetmetal.FlatPatternObjectType
EXTERIOR_CURVES - Static variable in class nxopen.sheetmetal.FlatPatternSettings.FlatPatternObjectType
EXTERIOR_EDGES - Static variable in class nxopen.cam.CutParametersTrimControlTypes: exterior edges
EXTERNAL - Static variable in class nxopen.cae.AssociationUtilities.PrintInfoType: print info to a file
EXTERNAL - Static variable in class nxopen.cae.Post.EdgeStyle
EXTERNAL - Static variable in class nxopen.cam.InspectionAlignmentBuilder.RecallStates: Recall external PCS
EXTERNAL_API - Static variable in class nxopen.cae.LaminateImportedLayupBuilder.ImportMethodEnum: External API.
EXTERNAL_APPLIED_HEAT_FLOW - Static variable in class nxopen.cae.Result.Quantity
EXTERNAL_FILE - Static variable in class nxopen.cae.LaminateImportedLayupBuilder.ImportMethodEnum: External file.
EXTERNAL_FUNCTION - Static variable in class nxopen.cam.InspectionMethodBuilder.CylinderFittingTypes: External Function
EXTERNAL_REFERENCE - Static variable in class nxopen.pdm.PdmSoaqueryNxmgrfielddatatype: External reference
EXTERNAL_TRIM - Static variable in class nxopen.cam.LaserProfileMove.ShapeTypes: External Trim
ExternalConnection - Interface in nxopen.mechatronics: Represents the External Connection class.
ExternalConnectionBuilder - Interface in nxopen.mechatronics: Represents a ExternalConnection builder
To create a new instance of this class, use ExternalConnectionCollection.createExternalConnectionBuilder(nxopen.mechatronics.ExternalConnection)

Created in NX8.0.0
ExternalConnectionBuilder.ConditionType - Class in nxopen.mechatronics: Deprecated.
Deprecated in NX8.0.1. Please use ExternalConnectionElementBuilder instead.
ExternalConnectionCollection - Interface in nxopen.mechatronics: Represents a collection of External Connection.
ExternalConnectionElement - Interface in nxopen.mechatronics: Represents the External Connection Element class.
ExternalConnectionElementBuilder - Interface in nxopen.mechatronics: Represents a ExternalConnectionElementBuilder builder
To create a new instance of this class, use ExternalConnectionCollection.createExternalConnectionElementBuilder(nxopen.mechatronics.ExternalConnectionElement)

Created in NX8.0.1
ExternalConnectionElementBuilder.ConditionType - Class in nxopen.mechatronics: the condition type.
ExternalConnectionElementBuilder.DataType - Class in nxopen.mechatronics: the data type.
ExternalConnectionElementBuilder.StreamType - Class in nxopen.mechatronics: the stream type.
ExternalConnectionElementBuilderList - Interface in nxopen.mechatronics: Represents a list of objects.
externalConnections() - Method in interface nxopen.mechatronics.PhysicsManager: Returns the ExternalConnectionCollection belonging to this part
Created in NX8.0.0
externalFrameAnchorName() - Method in interface nxopen.routing.PlatformCreatorBuilder: Returns the external frame stock anchor
License requirements: routing_platform ("Routing Platform")
.
externalObjectInformation() - Method in interface nxopen.ame.AmeDebugSession: Prints External Object information
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
externalReference() - Method in interface nxopen.features.subdivision.SubdivisionConnectCageBuilder: Returns the external edges
License requirements: None.
ExternalSignalConfigurationBuilder - Interface in nxopen.mechatronics: Represents a ExternalSignalConfigurationBuilder It is used to maintain all client builders for external signals.
ExternalSignalConfigurationCollection - Interface in nxopen.mechatronics: Represents a collection of ExternalSignalConfigurationObject.
ExternalSignalConfigurationObject - Interface in nxopen.mechatronics: Represents a ExternalSignalConfigurationObject It is used to maintain all clients configuration for external signals.
externalSignalConfigurations() - Method in interface nxopen.mechatronics.PhysicsManager: Returns the ExternalSignalConfigurationCollection belonging to this part
Created in NX12.0.0
externalSignalName() - Method in interface nxopen.mechatronics.SignalMappingConnectionBuilder: Returns the external signal name.
externalStockSettings() - Method in interface nxopen.routing.PlatformCreatorBuilder: Returns the external frame stock settings for stock assignment.
extLines - Variable in class nxopen.uf.UFSket.AskLegacyPreferencesData
EXTRA - Static variable in class nxopen.formboard.UpdateDiscrepancy.Type: Object is in the formboard but not in the 3D harness.
EXTRA_FINE - Static variable in class nxopen.cam.SimulationOptionsBuilder.Resolution: use extra fine resolution
EXTRA_FINE - Static variable in class nxopen.display.FacetSettingsBuilder.AdvVisToleranceSetting
EXTRA_FINE - Static variable in class nxopen.display.FacetSettingsBuilder.ShadedToleranceSetting
EXTRA_FINE - Static variable in class nxopen.fields.DisplayPropertiesBuilder.DispResolutionEnum
EXTRA_FINE - Static variable in class nxopen.geometricanalysis.HighlightLinesAnalysisBuilder.Resolutions: Extra Fine
EXTRA_FINE - Static variable in class nxopen.ListCreator.ResolutionType: ExtraFine
EXTRA_FINE - Static variable in class nxopen.preferences.GeneralToleranceOption: Extra Fine
EXTRA_FINE - Static variable in class nxopen.preferences.PartModeling.GridResolutionType: Extra Fine grid resolution
EXTRA_FINE - Static variable in class nxopen.preferences.SessionModeling.PreviewResolutionType
EXTRA_FINE - Static variable in class nxopen.preferences.ShadingToleranceOption: Extra Fine
EXTRA_FINE - Static variable in class nxopen.tooling.DieEngDefineProductOrientationBuilder.FacetQualityOption
EXTRA_HIGH - Static variable in class nxopen.display.Shadows.SsaoContrastType: Extra High contrast
EXTRA_ITEM - Static variable in class nxopen.routing.Run.CompareStatus: Extra item or items present in the run
EXTRA_RUN - Static variable in class nxopen.routing.Run.CompareStatus: Entire run is extra
EXTRA_SMALL - Static variable in class nxopen.markup.Icon.Size: Extra small size
extraCrossDrive() - Method in interface nxopen.cam.CleanupSettings: Returns the Extra Cross Drive, Cleanup Geometry Settings
License requirements: cam_base ("CAM BASE")
.
EXTRACT - Static variable in class nxopen.cam.InspectionConstructedFeatureBuilder.MethodEnumType: Creates a feature by extract neasurements from other features
Extract - Interface in nxopen.weld: Represents a Linked Feature created in the Weld Assistant.
EXTRACT_SOME_CONSTRAINTS_NOT_TRANSFERRED - Static variable in class nxopen.features.SketchConversionStatus.ReasonType: The extracted feature curves have been converted, but without some constraints
EXTRACT_SOURCE_SUPPRESSED - Static variable in class nxopen.features.SketchConversionStatus.ReasonType: The extracted feature curves have been converted with no constraints, because a source feature of the selected feature is suppressed.
ExtractAttribute - Interface in nxopen.ame: Extract Attribute Journaling class
This object does not need a creator.
ExtractAttributeAbsoluteBuilder - Interface in nxopen.ame: Create a extract attribute
This object does not need a creator.
ExtractAttributeBaseBuilder - Interface in nxopen.ame: Create a extract attribute
This is an abstract class, and cannot be instantiated.
ExtractAttributeBuilder - Interface in nxopen.ame: Create a extract attribute
To create a new instance of this class, use AMEManager.createExtractAttributeBuilder(nxopen.Part)

Created in NX11.0.0
ExtractAttributeBuilder.Type - Class in nxopen.ame: extract type Type
ExtractAttributeCurrentObjectBuilder - Interface in nxopen.ame: Create a extract attribute
This object does not need a creator.
ExtractAttributePortBuilder - Interface in nxopen.ame: Create a extract port attribute builder
This object does not need a creator.
ExtractAttributeRelativeBuilder - Interface in nxopen.ame: Create a extract attribute
This object does not need a creator.
extractBodyCollector() - Method in interface nxopen.features.ExtractFaceBuilder: Returns a collection of bodies to extract
License requirements: None.
ExtractCagePolylineBuilder - Interface in nxopen.features.subdivision: Extract cage polyline builder class.
ExtractCagePolylineBuilder.InputCurveOption - Class in nxopen.features.subdivision: Input curves options.
extracted - Variable in class nxopen.uf.UFBrep.Mapping
EXTRACTED_EDGE - Static variable in class nxopen.drawings.DraftingCurveInfo.DraftingCurveType: Specifies Extracted Edge Curve
EXTRACTED_EDGE_TYPE - Static variable in class nxopen.uf.UFDraw.DraftingCurveType
EXTRACTED_EDGES_OFF - Static variable in class nxopen.uf.UFDraw.ExtractedEdges
EXTRACTED_EDGES_ON - Static variable in class nxopen.uf.UFDraw.ExtractedEdges
EXTRACTED_MODEL_CURVE - Static variable in class nxopen.drawings.DraftingCurveInfo.DraftingCurveType: Specifies Extracted Model Curve
EXTRACTED_MODEL_CURVE_TYPE - Static variable in class nxopen.uf.UFDraw.DraftingCurveType
EXTRACTED_MODEL_POINT_TYPE - Static variable in class nxopen.uf.UFDraw.DraftingCurveType
extractedEdgeFaceDisplay() - Method in interface nxopen.preferences.SessionDrafting: Returns the extracted edge face display
License requirements: None.
extractedEdges() - Method in interface nxopen.drawings.GeneralViewStyle: Returns the extracted edge, that provides an alternative way to display model geometry in a drawing view.
extractedEdges() - Method in interface nxopen.drawings.ViewCreationWizardBuilder: Returns the extracted edges option
License requirements: None.
extractedEdges() - Method in interface nxopen.drawings.ViewStyleGeneralBuilder: Returns the extracted edges option on the GENERAL tab of the View Style Dialog
License requirements: None.
extractedEdges() - Method in interface nxopen.preferences.GeneralViewPreferences: Returns the extracted edge that provides an alternative way to display model geometry in a drawing view.
extractedEdges - Variable in class nxopen.uf.UFDraw.ViewPrfs
extractEdgeDistance() - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder: Returns the extract edge distance type type
License requirements: None.
extractedObjs - Variable in class nxopen.uf.UFSket.AddExtractedObjectsData
extractEndDistance() - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder: Returns the extract end edge distance
License requirements: None.
ExtractFace - Interface in nxopen.features: Represents a Extract face feature
To create or edit an instance of this class, use ExtractFaceBuilder

Created in NX5.0.0
extractFace(Tag, int) - Method in interface nxopen.uf.UFModlFeatures: Refer to UF_MODL_extract_face for documentation.
ExtractFaceBuilder - Interface in nxopen.features: Represents a ExtractFace builder.
extractFaceBuilder() - Method in interface nxopen.features.WaveLinkBuilder: Returns the extractfacebuilder
License requirements: None.
ExtractFaceBuilder.ExtractType - Class in nxopen.features: enum for feature type being extracted
ExtractFaceBuilder.FaceOptionType - Class in nxopen.features: enum for face option type
ExtractFaceBuilder.FaceSurfaceType - Class in nxopen.features: type of resulting surface
ExtractFaceBuilder.FeatureOptionType - Class in nxopen.features: enum for feature option type
ExtractFaceBuilder.ParentPartType - Class in nxopen.features: enum for scope of part
ExtractFaceBuilder.WaveLinkInformationData - Class in nxopen.features: This class holds the data returned from ExtractFaceBuilder.getWaveLinkInformation()
extractFormingRegion() - Method in interface nxopen.tooling.FormingInsertBuilder: Extract forming region.
extractGussetCurves() - Method in interface nxopen.features.sheetmetal.UnbendBuilder: Returns the option to extract gusset boundary curves
License requirements: None.
extraction - Variable in class nxopen.cae.Post.StreamlineSeed
extractMethod() - Method in interface nxopen.features.StudioXformBuilderEx: Returns the b-surface extraction method
License requirements: None.
ExtractPort - Interface in nxopen.routing: Routing ExtractPort object is an extract of Port class
To create an instance of this class use PortCollection.createExtractPort(nxopen.routing.Port)

Created in NX4.0.0
ExtractScene - Interface in nxopen.display: Represents a ExtractScene
This class is restricted to being called from a program running during an Interactive NX session.
extractSpreadsheet(String, String) - Method in interface nxopen.uf.UFXs: Refer to UF_XS_extract_spreadsheet for documentation.
extractStartDistance() - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder: Returns the extract start edge distance
License requirements: None.
extractTolerance() - Method in interface nxopen.features.IFormBuilder: Returns the tolerance used for b-surface extraction from a face
License requirements: None.
extractTolerance() - Method in interface nxopen.features.StudioXformBuilderEx: Returns the value indicating a tolerance to be used to extract a b-surface from a selection face
License requirements: None.
extractType() - Method in interface nxopen.ame.ExtractAttributeBuilder: Returns the object type extraction
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
EXTRAFINE - Static variable in class nxopen.preferences.PartVisualizationShade.AdvViewToleranceType: Extrafine
EXTRAFINE - Static variable in class nxopen.preferences.PartVisualizationShade.ShadedViewToleranceType: For Extrafine: Facet Edge Tolerance is 0.005, Facet Chord Tolerance is 0.001, and Angular Tolerance is 6
EXTRAPOLATE - Static variable in class nxopen.cae.SimConditionSequence.OutOfRangeBehavior
EXTRAPOLATE - Static variable in class nxopen.fields.FieldEvaluator.ValuesOutsideTableInterpolationEnum: Extrapolates from the boundary out into space using the same interpolation method that the interpolator for interior table values uses
extrapolation() - Method in interface nxopen.cae.AfuData: Returns the extrapolation type
License requirements: None.
extremeFacePointOverridesStationary() - Method in interface nxopen.features.DraftBodyBuilder: Returns the extreme face point overrides stationary
License requirements: None.
extremities - Variable in class nxopen.geometricutilities.RegionTracker.VertexSelectorsData: Extremity (false : start, true : end) of the edge corresponding to vertex
Extrude - Interface in nxopen.features: Represents an extrude feature.
extrude() - Method in interface nxopen.features.MasterCutBuilder: Returns the extrude builder
License requirements: None.
EXTRUDE - Static variable in class nxopen.features.shipdesign.SplitProfilePlateBuilder.ToolOptionType: Select curve and direction as extrude.
extrude() - Method in interface nxopen.features.subdivision.SubdivisionExtrudeCageBuilder: Perform extrude operation.
EXTRUDE - Static variable in class nxopen.geometricutilities.BooleanToolBuilder.BooleanToolType: Tool consists of extrude created on the fly
EXTRUDE - Static variable in class nxopen.tooling.ElectrodeBlankBuilder.JointObject: extrude body from joint face to blank
EXTRUDE - Static variable in class nxopen.tooling.MWDesignPartingSurfaceBuilder.PartingSurfaceType: Extrude
EXTRUDE_GEOM - Static variable in class nxopen.uf.UFBrep.GeomType
EXTRUDE_SECTION - Static variable in class nxopen.features.vehicledesign.WheelCoveringBuilder.SurfaceSectionType: The checking surface is created as extrude section type
ExtrudeBuilder - Interface in nxopen.features: Represents a extrude feature builder.
extrudeCurvesToTrueBodyAndFalseBody() - Method in interface nxopen.tooling.SpecialFormingBuilder: Extrude curves to true body and false body.
extrudeDirection() - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder: Returns the extrude or first direction used in creating parting surface that requires only one direction.
extrudeDistance() - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder: Returns the extrude distance for updating the expression "parting_extrude_distance".
extrudedMetallicSubSectionCripplingAllowable(double, double, int, double, double) - Method in interface nxopen.cae.aerostructures.author.ABB: Compute Crippling stress allowable for a given segment Crippling curves for a sub-section (also called a segment) of extruded metallic profiles.
ExtrudedMetallicSubSectionCripplingAllowableData() - Constructor for class nxopen.cae.aerostructures.author.ABB.ExtrudedMetallicSubSectionCripplingAllowableData
extrudeDraftAngle() - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder: Returns the draft angle for extrude parting surface
License requirements: None.
extrudeEnd() - Method in interface nxopen.tooling.BendInsertDesignBuilder: Returns the extrude end, A half when composite insert.
extrudeEnd1() - Method in interface nxopen.tooling.BendInsertDesignBuilder: Returns the extrude end B -half.
ExtrudeFacetBodyBuilder - Interface in nxopen.facet: Represents a ExtrudeFacetBodyBuilder It extrudes a NX Facet Body.
ExtrudeFacetBodyBuilder.LimitType - Class in nxopen.facet: Represents the extrude limit type
extrudeHeight() - Method in interface nxopen.weld.WeldFillBuilder: Returns the height of the extrusions representing the fill.
extrudeLength() - Method in interface nxopen.mechatronics.CamBuilder: Returns the extrude length.
ExtrudeLimitDataLimitType - Class in nxopen: This enum represents the type of limit
extrudeName() - Method in interface nxopen.cae.LaminateExtrudeSetupBuilder: Returns the name of the laminate extrusion setup
License requirements: None.
ExtrudeOffsetDataOffsetType - Class in nxopen: This enum represents the type of offset
ExtrudeProfileBuilder - Interface in nxopen.facet: Represents a ExtrudeProfileBuilder It extrudes 3D closed profile between planes.
extrudeRevolveTool() - Method in interface nxopen.geometricutilities.BooleanToolBuilder: Returns the ExtrudeRevolveTool builder.
ExtrudeRevolveToolBuilder - Interface in nxopen.geometricutilities: a class which is a sub-component of BooleanTool.
extrudeSetups() - Method in interface nxopen.cae.LaminateGlobalLayupMgr: Collection of laminate extrusion setup .
extrudeSketch() - Method in interface nxopen.tooling.BendInsertDesignBuilder: Returns the extrude sketch.
extrudeSolidBody() - Method in interface nxopen.drawings.ViewCopyTo3dBuilder: Deprecated.
Deprecated in NX8.0.0. This method is no longer relevant and calls to this can be safely removed.
extrudeStart() - Method in interface nxopen.tooling.BendInsertDesignBuilder: Returns the extrude start, A half when composite insert.
extrudeStart1() - Method in interface nxopen.tooling.BendInsertDesignBuilder: Returns the extrude start - B half.
ExtrudeTaperDataTaperType - Class in nxopen: This enum represents the type of taper
extrudeWidth() - Method in interface nxopen.die.FingerClearanceNotchBuilder: Returns the expression containing the value to use to extrude the section.
EXTRUSION - Static variable in class nxopen.features.shipdesign.LongitudinalBulkheadBuilder.Types: Mold face is being defined by extruding a supplied section shape.
EXTRUSION_TO_REVOLUTION - Static variable in class nxopen.motion.AnalyticalContactBuilder.ContactTypeOption
extrusionBodies() - Method in interface nxopen.motion.AnalyticalContactBuilder: Returns the extrusion bodies
License requirements: mechanisms ("MECHANISMS")
.
extrusionGeometryData() - Method in interface nxopen.motion.AnalyticalContactBuilder: Returns the extrusion line-arc file option
License requirements: mechanisms ("MECHANISMS")
.
extrusionGeometryDataFile() - Method in interface nxopen.motion.AnalyticalContactBuilder: Returns the extrusion line-arc file.
extrusionLimit() - Method in interface nxopen.features.shipdesign.LongitudinalBulkheadBuilder: Returns the plane definining the limit of the extrusion.
extrusionLink() - Method in interface nxopen.motion.AnalyticalContactBuilder: Returns the extrusion link
License requirements: mechanisms ("MECHANISMS")
.
extrusionMaterialSide() - Method in interface nxopen.motion.AnalyticalContactBuilder: Returns the material side toggle for extrusion
License requirements: mechanisms ("MECHANISMS")
.
extrusionVector - Variable in class nxopen.uf.UFDraw.BreakoutData
EYE - Static variable in class nxopen.LightType: An eye light is Located at the viewpoint or directly on the Z axis of the screen.
EYE_FEATURE - Static variable in class nxopen.features.vehicledesign.VisionPlaneBuilder.EnumEyeType: eye feature
EYE_FEATURE - Static variable in class nxopen.features.vehicledesign.WindshieldDatumBuilder.EnumEyeType: eye feature
EYE_LIGHT - Static variable in class nxopen.uf.UFView.LightType
EYE_TO_MIRROR - Static variable in class nxopen.features.vehicledesign.MirrorCertificationBuilder.ShowVisionConeType: Represents only Eye-Mirror vision cone is shown
eyeComponent() - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder: Returns the component part that contains the eye.
eyeFeature() - Method in interface nxopen.features.vehicledesign.VisionPlaneBuilder: Returns the eye feature; select eec feature when eye type specified.
eyeFeature() - Method in interface nxopen.features.vehicledesign.WindshieldDatumBuilder: Returns the eye feature; select eec feature when eye type specified.
eyellipse() - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder: Returns the eyellipse feature name used for mirror certification.
eyellipsePercentile() - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder: Returns the eyellipse percentile that will be used for mirror certification.
eyeMethod() - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder: Returns the method to calculate the eye location based on the distance from the eyellipse to the mirror pivot.
eyeMirrorRestrictions() - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder: Returns the faces representing the restrictions between the eye and the mirror.
eyeMirrorRestrictionsFacetBodies() - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder: Returns the facet bodies representing the restrictions between the eye and the mirror.
eyePoint() - Method in interface nxopen.features.vehicledesign.HoodVisibilityBuilder: Returns the eye point
License requirements: None.
eyePoint() - Method in interface nxopen.features.vehicledesign.ReflectionDataBuilder: Returns the eye point
License requirements: None.
eyePointMethod() - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder: Returns the method to define the eye point.
eyePointOffsetType() - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder: Returns the eye point offset types to define the close range visibility.
eyePointType() - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder: Returns the eye point types to define the close range visibility.
EYES - Static variable in class nxopen.HumanData.InverseKinematicsBodyParts: Indicate inverse kinematics body parts named eyes
eyeType() - Method in interface nxopen.features.vehicledesign.VisionPlaneBuilder: Returns the eye type to determine which type of v points to be used.
eyeType() - Method in interface nxopen.features.vehicledesign.WindshieldDatumBuilder: Returns the eye type to determine which type of v points to be used.

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z _