nxopen.formboard

Interface FlipComponentBuilder

All Superinterfaces:

Builder, IComponentBuilder, Remote, TaggedObject

public interface FlipComponentBuilder
extends Builder

Builder for flip component operation used in formboard. Allows user to flip the component by 180 degrees about an axis which is orthogonal to Z axis so that after flipping , the component lies in XY plane.
To create a new instance of this class, use FormboardManager.createFlipComponentBuilder()
Default values.

Property	Value
AxisTypeEnum	PathLocations

Created in NX7.5.0

Nested Class Summary

Nested Classes

Modifier and Type	Interface and Description
static class	FlipComponentBuilder.AxisType Enum for the selection of axis type for flipping formboard component

Method Summary

Modifier and Type	Method and Description
FlipComponentBuilder.AxisType	axisTypeEnum() Returns the user selected FlipComponentBuilder.AxisType method License requirements: routing_harness ("Routing Harness") Created in NX7.5.0
SelectNXObject	compSel() Returns the formboard component selected by user for flipping operation License requirements: routing_harness ("Routing Harness") .
NXObject[]	createDatumAxis() Creates datums axis at locations where selected formboard component is connected to path.
Axis	customAxis() Returns the custom axis which is created when FlipComponentBuilder.AxisType is FlipComponentBuilder.AxisType.CUSTOM License requirements: routing_harness ("Routing Harness") Created in NX7.5.0
void	flipComponent() Flips the selected formboard component by rotation angle about selected axis.
void	initializeFromComponent() Initializes or resets ( start or stop ) drag operation based on the component selected for flipping operation.
SelectNXObject	pathAxisSel() Returns the axis selected by user about which selected formboard component will be flipped.
void	setAxisTypeEnum(FlipComponentBuilder.AxisType axisTypeEnum) License requirements: routing_harness ("Routing Harness") .
void	setCustomAxis(Axis customAxis) License requirements: routing_harness ("Routing Harness") .
void	setRotationAngle(double angle) Set the angle to rotate the component.
void	startDrag() Starts the drag operation of selected object.
void	stopDrag() Stop the drag operation of selected object.

Methods inherited from interface nxopen.Builder

commit, destroy, getCommittedObjects, getObject, showResults

Methods inherited from interface nxopen.TaggedObject

printTestData, printTestData, tag, tagValue

Methods inherited from interface nxopen.geometricutilities.IComponentBuilder

validate

Method Detail

compSel

SelectNXObject compSel()
                throws NXException,
                       RemoteException

Returns the formboard component selected by user for flipping operation
License requirements: routing_harness ("Routing Harness")
.
Created in NX7.5.0

Throws:

NXException

RemoteException

axisTypeEnum

FlipComponentBuilder.AxisType axisTypeEnum()
                                    throws NXException,
                                           RemoteException

Returns the user selected FlipComponentBuilder.AxisType method
License requirements: routing_harness ("Routing Harness")

Created in NX7.5.0

Throws:

NXException

RemoteException

setAxisTypeEnum

void setAxisTypeEnum(FlipComponentBuilder.AxisType axisTypeEnum)
              throws NXException,
                     RemoteException

License requirements: routing_harness ("Routing Harness")
.
Created in NX7.5.0

Parameters:

axisTypeEnum -

Throws:

NXException

RemoteException

pathAxisSel

SelectNXObject pathAxisSel()
                    throws NXException,
                           RemoteException

Returns the axis selected by user about which selected formboard component will be flipped.
License requirements: routing_harness ("Routing Harness")

Created in NX7.5.0

Throws:

NXException

RemoteException

customAxis

Axis customAxis()
         throws NXException,
                RemoteException

Returns the custom axis which is created when FlipComponentBuilder.AxisType is FlipComponentBuilder.AxisType.CUSTOM
License requirements: routing_harness ("Routing Harness")

Created in NX7.5.0

Throws:

NXException

RemoteException

setCustomAxis

void setCustomAxis(Axis customAxis)
            throws NXException,
                   RemoteException

License requirements: routing_harness ("Routing Harness")
.
Created in NX7.5.0

Parameters:

customAxis -

Throws:

NXException

RemoteException

startDrag

void startDrag()
        throws NXException,
               RemoteException

Starts the drag operation of selected object. Does nothing if drag has already been started.
License requirements: routing_harness ("Routing Harness")

Created in NX7.5.0

Throws:

NXException

RemoteException

stopDrag

void stopDrag()
       throws NXException,
              RemoteException

Stop the drag operation of selected object. Does nothing if drag has not been started.
License requirements: routing_harness ("Routing Harness")

Created in NX7.5.0

Throws:

NXException

RemoteException

initializeFromComponent

void initializeFromComponent()
                      throws NXException,
                             RemoteException

Initializes or resets ( start or stop ) drag operation based on the component selected for flipping operation.
License requirements: routing_harness ("Routing Harness")

Created in NX7.5.0

Throws:

NXException

RemoteException

flipComponent

void flipComponent()
            throws NXException,
                   RemoteException

Flips the selected formboard component by rotation angle about selected axis.
License requirements: routing_harness ("Routing Harness")

Created in NX7.5.0

Throws:

NXException

RemoteException

createDatumAxis

NXObject[] createDatumAxis()
                    throws NXException,
                           RemoteException

Creates datums axis at locations where selected formboard component is connected to path.
License requirements: routing_harness ("Routing Harness")

Created in NX4.0.0

Throws:

NXException

RemoteException

setRotationAngle

void setRotationAngle(double angle)
               throws NXException,
                      RemoteException

Set the angle to rotate the component.
License requirements: routing_harness ("Routing Harness")

Created in NX7.5.3

Parameters:

angle - Rotation angle

Throws:

NXException

RemoteException