Modifier and Type | Method and Description |
---|---|
void |
addCutObject(DisplayableObject object)
Identify object to be drawn as Cut in Drafting
License requirements: None. |
AutomationManager |
automationManager()
|
BordersAndZonesCollection |
bordersAndZonesObjects()
Borders and Zones Collection .
|
DrawingsPropertiesBuilder |
createDrawingsPropertiesBuilder(DisplayableObject[] objects)
Create the DrawingsPropertiesBuilder
License requirements: drafting ("DRAFTING") . |
ImportAutocadBlockBuilder |
createImportAutocadBlockBuilder()
Creates the Builder for the AutoCAD Block Importer
License requirements: nx_layout ("NX Layout") . |
ImportSymbolBuilder |
createImportSymbolBuilder()
Creates the Builder for the Symbol Importer
License requirements: nx_layout ("NX Layout") . |
MarkAsTemplateBuilder |
createMarkAsTemplateBuilder()
|
SheetZoneReferenceBuilder |
createSheetZoneReferenceBuilder()
Creates the Sheet Zone Reference builder
License requirements: drafting ("DRAFTING") . |
void |
enterDraftingApplication()
Enter the drafting application
License requirements: None. |
void |
exitDraftingApplication()
Exit the drafting application
License requirements: None. |
boolean |
getTemplateInstantiationIsComplete()
Get the drawing template instantiation status
License requirements: None. |
boolean |
isCutObject(DisplayableObject object)
Is this object to be drawn as Cut?
|
void |
restoreUnpastedObjects()
Restores unpasted cut objects to their original drawing state
This method is used by NX user interface to restore drafting objects that were cut but not pasted. |
void |
restoreUnpastedObjectsOfPart(Part partOfUnpastedObject)
Restores unpasted cut objects of the specified part to their original drawing state
License requirements: None. |
SectionLineCollection |
sectionLines()
Section Line Collection .
|
void |
setDrawingLayout(boolean setToDrawingLayout)
Set a drafting layout
License requirements: None. |
void |
setTemplateInstantiationIsComplete(boolean templateInstantiationStatus)
Set the drawing template instantiation status
License requirements: drafting ("DRAFTING") . |
void |
versionUpAllDraftingObjects()
Converts all older drafting objects (including member views) in the part to the latest version.
|
void |
versionUpSelectedDraftingObjects(NXObject[] draftingObjects)
Converts selected drafting objects (including member views) in the part to the latest version.
|
SectionLineCollection sectionLines() throws RemoteException
RemoteException
AutomationManager automationManager() throws RemoteException
RemoteException
BordersAndZonesCollection bordersAndZonesObjects() throws RemoteException
RemoteException
void versionUpAllDraftingObjects() throws NXException, RemoteException
NXException
RemoteException
void versionUpSelectedDraftingObjects(NXObject[] draftingObjects) throws NXException, RemoteException
draftingObjects
- NXException
RemoteException
ImportSymbolBuilder createImportSymbolBuilder() throws NXException, RemoteException
NXException
RemoteException
MarkAsTemplateBuilder createMarkAsTemplateBuilder() throws NXException, RemoteException
NXException
RemoteException
SheetZoneReferenceBuilder createSheetZoneReferenceBuilder() throws NXException, RemoteException
NXException
RemoteException
ImportAutocadBlockBuilder createImportAutocadBlockBuilder() throws NXException, RemoteException
NXException
RemoteException
boolean getTemplateInstantiationIsComplete() throws NXException, RemoteException
NXException
RemoteException
void setTemplateInstantiationIsComplete(boolean templateInstantiationStatus) throws NXException, RemoteException
templateInstantiationStatus
- NXException
RemoteException
void addCutObject(DisplayableObject object) throws NXException, RemoteException
object
- NXException
RemoteException
void restoreUnpastedObjects() throws NXException, RemoteException
NXException
RemoteException
void restoreUnpastedObjectsOfPart(Part partOfUnpastedObject) throws NXException, RemoteException
partOfUnpastedObject
- NXException
RemoteException
boolean isCutObject(DisplayableObject object) throws NXException, RemoteException
object
- NXException
RemoteException
DrawingsPropertiesBuilder createDrawingsPropertiesBuilder(DisplayableObject[] objects) throws NXException, RemoteException
objects
- the array of part occurrencesNXException
RemoteException
void enterDraftingApplication() throws NXException, RemoteException
NXException
RemoteException
void exitDraftingApplication() throws NXException, RemoteException
NXException
RemoteException
void setDrawingLayout(boolean setToDrawingLayout) throws NXException, RemoteException
setToDrawingLayout
- true for drafting drawing layout, false for drafting model layoutNXException
RemoteException
Copyright 2017 Siemens Product Lifecycle Management Software Inc. All Rights Reserved.