public interface CurveFinderBuilder extends TaggedObject, IComponentBuilder
Modifier and Type | Method and Description |
---|---|
void |
addChamfer()
Adds chamfer relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
addCoincident()
Adds coincident vertex relations of the last vertexes added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
addCoincident2dComponent()
Adds coincident 2d component relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
addCoincidentSketchGroup()
Adds coincident sketch group relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
addConcentric()
Adds concentric relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
addConcentric2dComponent()
Adds concentric 2d component relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
addConcentricSketchGroup()
Adds concentric sketch group relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
addConlinear()
Adds conlinear relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
addConlinear2dComponent()
Adds conlinear 2d component relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
addConlinearSketchGroup()
Adds conlinear sketch group relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
addEqualRadius()
Adds equal radius relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
addEqualRadius2dComponent()
Adds equal radius 2d component relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
addEqualRadiusSketchGroup()
Adds equal radius sketch group relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
addOffset()
Adds offset relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
addOffset2dComponent()
Adds offset 2d component relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
addOffsetSketchGroup()
Adds offset sketch group relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
addParallel()
Adds parallel relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
addParallel2dComponent()
Adds parallel 2d component relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
addParallelSketchGroup()
Adds parallel sketch group relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
addSymmetric(int planeType)
Add symmetric relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
addTangent()
Adds tangent relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
addTangent2dComponent()
Adds tangent 2d component relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
addTangentSketchGroup()
Adds tangent sketch group relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
addVertexOnCurve()
Adds vertex on curve relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
addVertexOnCurve2dComponent()
Adds vertex on curve 2d component relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
addVertexOnCurveSketchGroup()
Adds vertex on curve sketch group relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
boolean |
chamferEnabled()
Returns a value that indicates whether add chamfer relation recognition for the last curves added to curve collector
License requirements: None. |
boolean |
coincidentVertex2dComponentEnabled()
Returns a value that indicates whether add coincident vertex 2d component relation recognition for the last curves added to curve collector
License requirements: None. |
boolean |
coincidentVertexEnabled()
Returns a value that indicates whether add coincident vertex relation recognition for the last curves added to curve collector
License requirements: None. |
boolean |
coincidentVertexSketchGroupEnabled()
Returns a value that indicates whether add coincident vertex relation recognition for the last curves added to curve collector
License requirements: None. |
boolean |
collinear2dComponentEnabled()
Returns a value that indicates whether add collinear 2d component relation recognition for the last curves added to curve collector
License requirements: None. |
boolean |
collinearEnabled()
Returns a value that indicates whether add collinear relation recognition for the last curves added to curve collector
License requirements: None. |
boolean |
collinearSketchGroupEnabled()
Returns a value that indicates whether add collinear relation recognition for the last curves added to curve collector
License requirements: None. |
int |
compoundGeometryRelationScope()
Returns a value that indicates what kind of 2d component relations are needed to recognize
License requirements: None. |
boolean |
concentric2dComponentEnabled()
Returns a value that indicates whether add concentric 2d component relation recognition for the last curves added to curve collector
License requirements: None. |
boolean |
concentricEnabled()
Returns a value that indicates whether add concentric relation recognition for the last curves added to curve collector
License requirements: None. |
boolean |
concentricSketchGroupEnabled()
Returns a value that indicates whether add concentric relation recognition for the last curves added to curve collector
License requirements: None. |
SelectDisplayableObjectList |
curvePointList()
Returns the curve and point collector
License requirements: None. |
ScCollector |
curveSection()
Deprecated.
Deprecated in NX10.0.0. This is for pre NX10 usage, do not use this method.
|
void |
deselectCurves(NXObject[] curves)
Removes curves from collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
deselectSnapPoint(TaggedObject selectedCurve,
Point3d point)
Removes snap point from collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
deselectSymmetryReference(NXObject symmetryReference)
Deselect entity for symmetry reference
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
boolean |
equalRadius2dComponentEnabled()
Returns a value that indicates whether add equal radius 2d component recognition for the last curves added to curve collector
License requirements: None. |
boolean |
equalRadiusEnabled()
Returns a value that indicates whether add equal radius recognition for the last curves added to curve collector
License requirements: None. |
boolean |
equalRadiusSketchGroupEnabled()
Returns a value that indicates whether add equal radius recognition for the last curves added to curve collector
License requirements: None. |
void |
findRelationCurve(NXObject[] selectedCurves)
Finds relation curves
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
findScopeCurve(NXObject[] selectedCurves)
Finds relation curves in the scope
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
int |
findScopeOption()
Returns a value that indicates which find scope option is
License requirements: None. |
boolean |
offset2dComponentEnabled()
Returns a value that indicates whether add offset 2d component relation recognition for the last curves added to curve collector
License requirements: None. |
boolean |
offsetEnabled()
Returns a value that indicates whether add offset relation recognition for the last curves added to curve collector
License requirements: None. |
boolean |
offsetSketchGroupEnabled()
Returns a value that indicates whether add offset relation recognition for the last curves added to curve collector
License requirements: None. |
boolean |
parallel2dComponentEnabled()
Returns a value that indicates whether add parallel 2d component relation recognition for the last curves added to curve collector
License requirements: None. |
boolean |
parallelEnabled()
Returns a value that indicates whether add parallel relation recognition for the last curves added to curve collector
License requirements: None. |
boolean |
parallelSketchGroupEnabled()
Returns a value that indicates whether add parallel relation recognition for the last curves added to curve collector
License requirements: None. |
void |
recognizeRigid(NXObject constraintTag)
Recognize rigid from the recognized relation
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
int |
relationScope()
Returns a value that indicates what kind of relations are needed to recognize
License requirements: None. |
void |
removeChamfer()
Removes chamfer relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
removeCoincident()
Removes coincident vertex relations of the last vertexes added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
removeCoincident2dComponent()
Removes coincident 2d component relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
removeCoincidentSketchGroup()
Removes coincident sketch group relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
removeConcentric()
Removes concentric relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
removeConcentric2dComponent()
Removes concentric 2d component relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
removeConcentricSketchGroup()
Removes concentric sketch group relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
removeConlinear()
Removes conlinear relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
removeConlinear2dComponent()
Removes conlinear 2d component relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
removeConlinearSketchGroup()
Removes conlinear sketch group relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
removeEngineNodes()
Close the VTK interaction and Remove all nodes from the Engine
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
removeEqualRadius()
Removes equal radius relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
removeEqualRadius2dComponent()
Removes equal radius 2d component relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
removeEqualRadiusSketchGroup()
Removes equal radius sketch group relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
removeIncludedConstraints()
Remove all the included constraint
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
removeOffset()
Removes offset relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
removeOffset2dComponent()
Removes offset 2d component relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
removeOffsetSketchGroup()
Removes offset sketch group relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
removeParallel()
Removes parallel relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
removeParallel2dComponent()
Removes parallel 2d component relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
removeParallelSketchGroup()
Removes parallel sketch group relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
removeSymmetric(int planeType)
Removes symmetric relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
removeTangent()
Removes tangent relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
removeTangent2dComponent()
Removes tangent 2d component relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
removeTangentSketchGroup()
Removes tangent sketch group relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
removeVertexOnCurve()
Removes vertex on curve relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
removeVertexOnCurve2dComponent()
Removes vertex on curve 2d component relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
removeVertexOnCurveSketchGroup()
Removes vertex on curve sketch group relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
restoreEngineNodes()
ReStore all nodes from the Engine On Undo
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
selectCurves(NXObject[] curves)
Adds curves to collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
selectSnapPoint(TaggedObject selectedCurve,
Point3d point)
Adds snap point to collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
selectSymmetryReference(NXObject symmetryReference)
Selects entity for symmetry reference
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
setChamferEnabled(boolean chamferEnabled)
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
setCoincidentVertex2dComponentEnabled(boolean coincidentVertex2dComponentEnabled)
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
setCoincidentVertexEnabled(boolean coincidentVertexEnabled)
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
setCoincidentVertexSketchGroupEnabled(boolean coincidentVertexEnabled)
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
setCollinear2dComponentEnabled(boolean collinear2dComponentEnabled)
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
setCollinearEnabled(boolean collinearEnabled)
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
setCollinearSketchGroupEnabled(boolean collinearEnabled)
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
setCompoundGeometryRelationScope(int relationScope)
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
setConcentric2dComponentEnabled(boolean concentricComponentGeometryEnabled)
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
setConcentricEnabled(boolean concentricEnabled)
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
setConcentricSketchGroupEnabled(boolean concentricEnabled)
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
setDistanceTolerance(double distanceTolerance)
Set the distance Tolerance for loop Recognization
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
setEqualRadius2dComponentEnabled(boolean equalRadius2dComponentEnabled)
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
setEqualRadiusEnabled(boolean equalRadiusEnabled)
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
setEqualRadiusSketchGroupEnabled(boolean equalRadiusEnabled)
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
setFindScopeOption(int scopeOption)
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
setOffset2dComponentEnabled(boolean offset2dComponentEnabled)
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
setOffsetEnabled(boolean offsetEnabled)
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
setOffsetSketchGroupEnabled(boolean offsetEnabled)
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
setParallel2dComponentEnabled(boolean parallel2dComponentEnabled)
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
setParallelEnabled(boolean parallelEnabled)
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
setParallelSketchGroupEnabled(boolean parallelEnabled)
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
setRelationScope(int relationScope)
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
setSketchGroupRelationScope(int relationScope)
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
setSymmetricEnabled(boolean symmetricEnabled)
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
setSymmetryOption(int symmetryOption)
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
setTangent2dComponentEnabled(boolean tangent2dComponentEnabled)
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
setTangentEnabled(boolean tangentEnabled)
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
setTangentSketchGroupEnabled(boolean tangentSketchGroupEnabled)
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
setUseCurveFinder(boolean curveBrowseEnabled)
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
setVertexOnCurve2dComponentEnabled(boolean vertexOnCurve2dComponentEnabled)
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
setVertexOnCurveEnabled(boolean vertexOnCurveEnabled)
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
setVertexOnCurveSketchGroupEnabled(boolean vertexOnCurveEnabled)
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
int |
sketchGroupRelationScope()
Returns a value that indicates what kind of sketch group relations are needed to recognize
License requirements: None. |
boolean |
symmetricEnabled()
Returns a value that indicates whether add symmetric relation recognition for the last curves added to curve collector
License requirements: None. |
int |
symmetryOption()
Returns a value that indicates which symmetric option is
License requirements: None. |
SelectNXObject |
symmetryReference()
Returns the symmetry line reference
License requirements: None. |
boolean |
tangent2dComponentEnabled()
Returns a value that indicates whether add tangent 2d component relation recognition for the last curves added to curve collector
License requirements: None. |
boolean |
tangentEnabled()
Returns a value that indicates whether add tangent relation recognition for the last curves added to curve collector
License requirements: None. |
boolean |
tangentSketchGroupEnabled()
Returns a value that indicates whether add tangent relation recognition for the last curves added to curve collector
License requirements: None. |
void |
unrecognizeRigid(NXObject constraintTag)
Unrecognize rigid from the unrecognized relation
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
boolean |
useCurveFinder()
Returns a value that indicates whether relation recognition is enabled
License requirements: None. |
boolean |
vertexOnCurve2dComponentEnabled()
Returns a value that indicates whether add vertex on curve 2d component relation recognition for the last vertexes added to the collector
License requirements: None. |
boolean |
vertexOnCurveEnabled()
Returns a value that indicates whether add vertex on curve relation recognition for the last vertexes added to the collector
License requirements: None. |
boolean |
vertexOnCurveSketchGroupEnabled()
Returns a value that indicates whether add vertex on curve relation recognition for the last vertexes added to the collector
License requirements: None. |
printTestData, printTestData, tag, tagValue
validate
ScCollector curveSection() throws NXException, RemoteException
NXException
RemoteException
SelectDisplayableObjectList curvePointList() throws NXException, RemoteException
NXException
RemoteException
void selectCurves(NXObject[] curves) throws NXException, RemoteException
curves
- NXException
RemoteException
void deselectCurves(NXObject[] curves) throws NXException, RemoteException
curves
- NXException
RemoteException
void selectSymmetryReference(NXObject symmetryReference) throws NXException, RemoteException
symmetryReference
- NXException
RemoteException
void deselectSymmetryReference(NXObject symmetryReference) throws NXException, RemoteException
symmetryReference
- NXException
RemoteException
void addTangent() throws NXException, RemoteException
NXException
RemoteException
void removeTangent() throws NXException, RemoteException
NXException
RemoteException
void addTangentSketchGroup() throws NXException, RemoteException
NXException
RemoteException
void removeTangentSketchGroup() throws NXException, RemoteException
NXException
RemoteException
void addTangent2dComponent() throws NXException, RemoteException
NXException
RemoteException
void removeTangent2dComponent() throws NXException, RemoteException
NXException
RemoteException
void addParallel() throws NXException, RemoteException
NXException
RemoteException
void removeParallel() throws NXException, RemoteException
NXException
RemoteException
void addParallelSketchGroup() throws NXException, RemoteException
NXException
RemoteException
void removeParallelSketchGroup() throws NXException, RemoteException
NXException
RemoteException
void addParallel2dComponent() throws NXException, RemoteException
NXException
RemoteException
void removeParallel2dComponent() throws NXException, RemoteException
NXException
RemoteException
void addOffset() throws NXException, RemoteException
NXException
RemoteException
void removeOffset() throws NXException, RemoteException
NXException
RemoteException
void addOffsetSketchGroup() throws NXException, RemoteException
NXException
RemoteException
void removeOffsetSketchGroup() throws NXException, RemoteException
NXException
RemoteException
void addOffset2dComponent() throws NXException, RemoteException
NXException
RemoteException
void removeOffset2dComponent() throws NXException, RemoteException
NXException
RemoteException
void addCoincident() throws NXException, RemoteException
NXException
RemoteException
void removeCoincident() throws NXException, RemoteException
NXException
RemoteException
void addCoincidentSketchGroup() throws NXException, RemoteException
NXException
RemoteException
void removeCoincidentSketchGroup() throws NXException, RemoteException
NXException
RemoteException
void addCoincident2dComponent() throws NXException, RemoteException
NXException
RemoteException
void removeCoincident2dComponent() throws NXException, RemoteException
NXException
RemoteException
void addVertexOnCurve() throws NXException, RemoteException
NXException
RemoteException
void removeVertexOnCurve() throws NXException, RemoteException
NXException
RemoteException
void addVertexOnCurveSketchGroup() throws NXException, RemoteException
NXException
RemoteException
void removeVertexOnCurveSketchGroup() throws NXException, RemoteException
NXException
RemoteException
void addVertexOnCurve2dComponent() throws NXException, RemoteException
NXException
RemoteException
void removeVertexOnCurve2dComponent() throws NXException, RemoteException
NXException
RemoteException
void addChamfer() throws NXException, RemoteException
NXException
RemoteException
void removeChamfer() throws NXException, RemoteException
NXException
RemoteException
void addConlinear() throws NXException, RemoteException
NXException
RemoteException
void removeConlinear() throws NXException, RemoteException
NXException
RemoteException
void addConlinearSketchGroup() throws NXException, RemoteException
NXException
RemoteException
void removeConlinearSketchGroup() throws NXException, RemoteException
NXException
RemoteException
void addConlinear2dComponent() throws NXException, RemoteException
NXException
RemoteException
void removeConlinear2dComponent() throws NXException, RemoteException
NXException
RemoteException
void addConcentric() throws NXException, RemoteException
NXException
RemoteException
void removeConcentric() throws NXException, RemoteException
NXException
RemoteException
void addConcentricSketchGroup() throws NXException, RemoteException
NXException
RemoteException
void removeConcentricSketchGroup() throws NXException, RemoteException
NXException
RemoteException
void addConcentric2dComponent() throws NXException, RemoteException
NXException
RemoteException
void removeConcentric2dComponent() throws NXException, RemoteException
NXException
RemoteException
void addEqualRadius() throws NXException, RemoteException
NXException
RemoteException
void removeEqualRadius() throws NXException, RemoteException
NXException
RemoteException
void addEqualRadiusSketchGroup() throws NXException, RemoteException
NXException
RemoteException
void removeEqualRadiusSketchGroup() throws NXException, RemoteException
NXException
RemoteException
void addEqualRadius2dComponent() throws NXException, RemoteException
NXException
RemoteException
void removeEqualRadius2dComponent() throws NXException, RemoteException
NXException
RemoteException
void addSymmetric(int planeType) throws NXException, RemoteException
planeType
- NXException
RemoteException
void removeSymmetric(int planeType) throws NXException, RemoteException
planeType
- NXException
RemoteException
int symmetryOption() throws NXException, RemoteException
NXException
RemoteException
void setSymmetryOption(int symmetryOption) throws NXException, RemoteException
symmetryOption
- NXException
RemoteException
SelectNXObject symmetryReference() throws NXException, RemoteException
NXException
RemoteException
boolean useCurveFinder() throws NXException, RemoteException
NXException
RemoteException
void setUseCurveFinder(boolean curveBrowseEnabled) throws NXException, RemoteException
curveBrowseEnabled
- NXException
RemoteException
void findRelationCurve(NXObject[] selectedCurves) throws NXException, RemoteException
selectedCurves
- NXException
RemoteException
boolean tangentEnabled() throws NXException, RemoteException
NXException
RemoteException
boolean tangentSketchGroupEnabled() throws NXException, RemoteException
NXException
RemoteException
boolean tangent2dComponentEnabled() throws NXException, RemoteException
NXException
RemoteException
void setTangentEnabled(boolean tangentEnabled) throws NXException, RemoteException
tangentEnabled
- NXException
RemoteException
void setTangentSketchGroupEnabled(boolean tangentSketchGroupEnabled) throws NXException, RemoteException
tangentSketchGroupEnabled
- NXException
RemoteException
void setTangent2dComponentEnabled(boolean tangent2dComponentEnabled) throws NXException, RemoteException
tangent2dComponentEnabled
- NXException
RemoteException
boolean concentricEnabled() throws NXException, RemoteException
NXException
RemoteException
boolean concentricSketchGroupEnabled() throws NXException, RemoteException
NXException
RemoteException
boolean concentric2dComponentEnabled() throws NXException, RemoteException
NXException
RemoteException
void setConcentricEnabled(boolean concentricEnabled) throws NXException, RemoteException
concentricEnabled
- NXException
RemoteException
void setConcentricSketchGroupEnabled(boolean concentricEnabled) throws NXException, RemoteException
concentricEnabled
- NXException
RemoteException
void setConcentric2dComponentEnabled(boolean concentricComponentGeometryEnabled) throws NXException, RemoteException
concentricComponentGeometryEnabled
- NXException
RemoteException
boolean collinearEnabled() throws NXException, RemoteException
NXException
RemoteException
boolean collinearSketchGroupEnabled() throws NXException, RemoteException
NXException
RemoteException
boolean collinear2dComponentEnabled() throws NXException, RemoteException
NXException
RemoteException
void setCollinearEnabled(boolean collinearEnabled) throws NXException, RemoteException
collinearEnabled
- NXException
RemoteException
void setCollinearSketchGroupEnabled(boolean collinearEnabled) throws NXException, RemoteException
collinearEnabled
- NXException
RemoteException
void setCollinear2dComponentEnabled(boolean collinear2dComponentEnabled) throws NXException, RemoteException
collinear2dComponentEnabled
- NXException
RemoteException
boolean equalRadiusEnabled() throws NXException, RemoteException
NXException
RemoteException
boolean equalRadiusSketchGroupEnabled() throws NXException, RemoteException
NXException
RemoteException
boolean equalRadius2dComponentEnabled() throws NXException, RemoteException
NXException
RemoteException
void setEqualRadiusEnabled(boolean equalRadiusEnabled) throws NXException, RemoteException
equalRadiusEnabled
- NXException
RemoteException
void setEqualRadiusSketchGroupEnabled(boolean equalRadiusEnabled) throws NXException, RemoteException
equalRadiusEnabled
- NXException
RemoteException
void setEqualRadius2dComponentEnabled(boolean equalRadius2dComponentEnabled) throws NXException, RemoteException
equalRadius2dComponentEnabled
- NXException
RemoteException
boolean symmetricEnabled() throws NXException, RemoteException
NXException
RemoteException
void setSymmetricEnabled(boolean symmetricEnabled) throws NXException, RemoteException
symmetricEnabled
- NXException
RemoteException
boolean parallelEnabled() throws NXException, RemoteException
NXException
RemoteException
boolean parallelSketchGroupEnabled() throws NXException, RemoteException
NXException
RemoteException
boolean parallel2dComponentEnabled() throws NXException, RemoteException
NXException
RemoteException
void setParallelEnabled(boolean parallelEnabled) throws NXException, RemoteException
parallelEnabled
- NXException
RemoteException
void setParallelSketchGroupEnabled(boolean parallelEnabled) throws NXException, RemoteException
parallelEnabled
- NXException
RemoteException
void setParallel2dComponentEnabled(boolean parallel2dComponentEnabled) throws NXException, RemoteException
parallel2dComponentEnabled
- NXException
RemoteException
boolean offsetEnabled() throws NXException, RemoteException
NXException
RemoteException
boolean offsetSketchGroupEnabled() throws NXException, RemoteException
NXException
RemoteException
boolean offset2dComponentEnabled() throws NXException, RemoteException
NXException
RemoteException
void setOffsetEnabled(boolean offsetEnabled) throws NXException, RemoteException
offsetEnabled
- NXException
RemoteException
void setOffsetSketchGroupEnabled(boolean offsetEnabled) throws NXException, RemoteException
offsetEnabled
- NXException
RemoteException
void setOffset2dComponentEnabled(boolean offset2dComponentEnabled) throws NXException, RemoteException
offset2dComponentEnabled
- NXException
RemoteException
boolean coincidentVertexEnabled() throws NXException, RemoteException
NXException
RemoteException
boolean coincidentVertexSketchGroupEnabled() throws NXException, RemoteException
NXException
RemoteException
boolean coincidentVertex2dComponentEnabled() throws NXException, RemoteException
NXException
RemoteException
void setCoincidentVertexEnabled(boolean coincidentVertexEnabled) throws NXException, RemoteException
coincidentVertexEnabled
- NXException
RemoteException
void setCoincidentVertexSketchGroupEnabled(boolean coincidentVertexEnabled) throws NXException, RemoteException
coincidentVertexEnabled
- NXException
RemoteException
void setCoincidentVertex2dComponentEnabled(boolean coincidentVertex2dComponentEnabled) throws NXException, RemoteException
coincidentVertex2dComponentEnabled
- NXException
RemoteException
boolean vertexOnCurveEnabled() throws NXException, RemoteException
NXException
RemoteException
boolean vertexOnCurveSketchGroupEnabled() throws NXException, RemoteException
NXException
RemoteException
boolean vertexOnCurve2dComponentEnabled() throws NXException, RemoteException
NXException
RemoteException
void setVertexOnCurveEnabled(boolean vertexOnCurveEnabled) throws NXException, RemoteException
vertexOnCurveEnabled
- NXException
RemoteException
void setVertexOnCurveSketchGroupEnabled(boolean vertexOnCurveEnabled) throws NXException, RemoteException
vertexOnCurveEnabled
- NXException
RemoteException
void setVertexOnCurve2dComponentEnabled(boolean vertexOnCurve2dComponentEnabled) throws NXException, RemoteException
vertexOnCurve2dComponentEnabled
- NXException
RemoteException
boolean chamferEnabled() throws NXException, RemoteException
NXException
RemoteException
void setChamferEnabled(boolean chamferEnabled) throws NXException, RemoteException
chamferEnabled
- NXException
RemoteException
int findScopeOption() throws NXException, RemoteException
NXException
RemoteException
void setFindScopeOption(int scopeOption) throws NXException, RemoteException
scopeOption
- NXException
RemoteException
void findScopeCurve(NXObject[] selectedCurves) throws NXException, RemoteException
selectedCurves
- NXException
RemoteException
void removeEngineNodes() throws NXException, RemoteException
NXException
RemoteException
void restoreEngineNodes() throws NXException, RemoteException
NXException
RemoteException
int relationScope() throws NXException, RemoteException
NXException
RemoteException
void setRelationScope(int relationScope) throws NXException, RemoteException
relationScope
- NXException
RemoteException
int sketchGroupRelationScope() throws NXException, RemoteException
NXException
RemoteException
void setSketchGroupRelationScope(int relationScope) throws NXException, RemoteException
relationScope
- NXException
RemoteException
int compoundGeometryRelationScope() throws NXException, RemoteException
NXException
RemoteException
void setCompoundGeometryRelationScope(int relationScope) throws NXException, RemoteException
relationScope
- NXException
RemoteException
void setDistanceTolerance(double distanceTolerance) throws NXException, RemoteException
distanceTolerance
- NXException
RemoteException
void removeIncludedConstraints() throws NXException, RemoteException
NXException
RemoteException
void recognizeRigid(NXObject constraintTag) throws NXException, RemoteException
constraintTag
- NXException
RemoteException
void unrecognizeRigid(NXObject constraintTag) throws NXException, RemoteException
constraintTag
- NXException
RemoteException
void selectSnapPoint(TaggedObject selectedCurve, Point3d point) throws NXException, RemoteException
selectedCurve
- selected curvepoint
- selected pointNXException
RemoteException
void deselectSnapPoint(TaggedObject selectedCurve, Point3d point) throws NXException, RemoteException
selectedCurve
- selected curvepoint
- selected pointNXException
RemoteException
Copyright 2017 Siemens Product Lifecycle Management Software Inc. All Rights Reserved.