- P - Static variable in class nxopen.annotations.LineWeldDataBuilder.WeldSizeCodeType
-
- P - Static variable in class nxopen.annotations.SizeLetterCode
-
Specifies size letter code "P"
- P - Static variable in class nxopen.cam.TurnToolBuilder.HolderStyles
-
P-Style
- P - Static variable in class nxopen.features.shipdesign.SectionViewBuilder.DirectionOptions
-
- P105 - Static variable in class nxopen.display.CameraBuilder.LensFlare
-
105mm poly
- P11 - Static variable in class nxopen.cam.TurnToolBuilder.ReliefAngleTypes
-
Relief angle type: P (11)
- P25 - Static variable in class nxopen.HumanHandsDialogBuilder.BreadthType
-
- P25 - Static variable in class nxopen.HumanHandsDialogBuilder.LengthType
-
- P25P400 - Static variable in class nxopen.shapesearch.ShapeSearchBuilder.ShapeSize
-
search with shape size 25%-400% condition
- P35 - Static variable in class nxopen.display.CameraBuilder.LensFlare
-
35mm poly
- P5 - Static variable in class nxopen.HumanHandsDialogBuilder.BreadthType
-
- P5 - Static variable in class nxopen.HumanHandsDialogBuilder.LengthType
-
- P50 - Static variable in class nxopen.display.CameraBuilder.LensFlare
-
50mm poly
- P50 - Static variable in class nxopen.HumanHandsDialogBuilder.BreadthType
-
- P50 - Static variable in class nxopen.HumanHandsDialogBuilder.LengthType
-
- P50P200 - Static variable in class nxopen.shapesearch.ShapeSearchBuilder.ShapeSize
-
search with shape size 50%-200% condition
- P70P130 - Static variable in class nxopen.shapesearch.ShapeSearchBuilder.ShapeSize
-
search with shape size 70%-130% condition
- P75 - Static variable in class nxopen.HumanHandsDialogBuilder.BreadthType
-
- P75 - Static variable in class nxopen.HumanHandsDialogBuilder.LengthType
-
- P80P120 - Static variable in class nxopen.shapesearch.ShapeSearchBuilder.ShapeSize
-
search with shape size 80%-120% condition
- P90P110 - Static variable in class nxopen.shapesearch.ShapeSearchBuilder.ShapeSize
-
search with shape size 90%-110% condition
- P95 - Static variable in class nxopen.HumanHandsDialogBuilder.BreadthType
-
- P95 - Static variable in class nxopen.HumanHandsDialogBuilder.LengthType
-
- PACKAGE - Static variable in class nxopen.options.LevelType
-
Package level
- PACKAGE - Static variable in class nxopen.preferences.LoadDraftingStandardBuilder.LoadLevel
-
the package level
- Packaging - Interface in nxopen.motion
-
- PackagingBuilder - Interface in nxopen.motion
-
- PackagingCollection - Interface in nxopen.motion
-
Represents a collection of Packaging objects
To obtain an instance of this class, refer to
Part
Created in NX4.0.0
- packagingCollection() - Method in interface nxopen.Part
-
Returns the PackagingCollection for this part .
- PackagingInterference - Interface in nxopen.motion
-
This class represents a Packaging Interference object.
- PackagingInterferenceBuilder - Interface in nxopen.motion
-
This the builder class to create or edit an Interference object.
- PackagingInterferenceBuilder.Action - Class in nxopen.motion
-
Interference action type
- PackagingInterferenceBuilder.Frame - Class in nxopen.motion
-
Interference solid reference frame type.
- PackagingInterferenceBuilder.Mode - Class in nxopen.motion
-
Interference calculation mode type
- PackagingMeasure - Interface in nxopen.motion
-
This class represents a Packaging Measure object.
- PackagingMeasureBuilder - Interface in nxopen.motion
-
This is the builder class to create or edit a Measure object.
- PackagingMeasureBuilder.GeometryData - Class in nxopen.motion
-
Represents geometry data.
- PackagingMeasureBuilder.MeasureCondition - Class in nxopen.motion
-
Measure condition
- PackagingMeasureBuilder.MeasureType - Class in nxopen.motion
-
Measure type
- PackagingTrace - Interface in nxopen.motion
-
This class represents a Packaging Trace object.
- PackagingTraceBuilder - Interface in nxopen.motion
-
This is the builder class to create or edit a Trace object.
- PackagingTraceBuilder.Frame - Class in nxopen.motion
-
Trace reference frame type
- packedColumns() - Method in interface nxopen.blockstyler.Enumeration
-
Returns the PackedColumns.
- PAD - Static variable in class nxopen.features.VarOffsetFaceBuilder.Types
-
- padAttributes() - Method in interface nxopen.die.HeelpostBuilder
-
Returns the pad attributes
License requirements: None.
- padAttributes() - Method in interface nxopen.die.KeywayBuilder
-
Returns the pad attributes
License requirements: None.
- PadAttributesData() - Constructor for class nxopen.die.HoleChildBuilder.PadAttributesData
-
- PadAttributesData() - Constructor for class nxopen.die.HoleParentBuilder.PadAttributesData
-
- PadAttributesData() - Constructor for class nxopen.die.PadChildBuilder.PadAttributesData
-
- PadAttributesData() - Constructor for class nxopen.die.PadParentBuilder.PadAttributesData
-
- PadAttributesData() - Constructor for class nxopen.die.WearPlateLocChildBuilder.PadAttributesData
-
- PadAttributesData() - Constructor for class nxopen.die.WearPlateLocParentBuilder.PadAttributesData
-
- padBoolean() - Method in interface nxopen.tooling.BackingPadBuilder
-
Returns the pad boolean
License requirements: None.
- PadChildBuilder - Interface in nxopen.die
-
Represents a Die Pad Child sub feature.
- PadChildBuilder.HoleAttributesData - Class in nxopen.die
-
- PadChildBuilder.PadAttributesData - Class in nxopen.die
-
- PadChildBuilder.ShapeData - Class in nxopen.die
-
- PadChildBuilder.ShapeTypeOption - Class in nxopen.die
-
Settings for the shape type of the die pad.
- padDiameter() - Method in interface nxopen.die.HoleChildBuilder
-
Returns the pad diameter of the die hole.
- padDiameter() - Method in interface nxopen.die.HoleParentBuilder
-
Returns the pad diameter of die holes.
- paddingFromLastSymbol - Variable in class nxopen.diagramming.tables.SizedSymbol
-
Padding from last symbol
- padFacesAttributes() - Method in interface nxopen.die.ClampingSlotBuilder
-
Returns the attributes for the pad faces
License requirements: None.
- padHeight() - Method in interface nxopen.die.ClampingSlotBuilder
-
Returns the height of the pad
License requirements: None.
- padHeight() - Method in interface nxopen.die.HoleChildBuilder
-
Returns the pad height of the die hole.
- padHeight() - Method in interface nxopen.die.HoleParentBuilder
-
Returns the pad height of die holes.
- padHeight() - Method in interface nxopen.die.KeywayBuilder
-
Returns the expression for the pad height
License requirements: None.
- padHeight() - Method in interface nxopen.die.KeywayChildBuilder
-
Returns the pad height of the keyway.
- padHeight() - Method in interface nxopen.die.KeywayParentBuilder
-
Returns the pad height of keyways.
- padHeightLinearDimension() - Method in interface nxopen.tooling.BackingPadBuilder
-
Returns the pad height linear dimension
License requirements: None.
- padLength() - Method in interface nxopen.die.ClampingSlotBuilder
-
Returns the length of the pad from front to back
License requirements: None.
- padLength - Variable in class nxopen.uf.UFModlFeatures.AskRectPadParms1Data
-
- padOffset() - Method in interface nxopen.die.ClampingSlotBuilder
-
Returns the amount to offset from the pad orientation to determine true top of pad
License requirements: None.
- padOffset() - Method in interface nxopen.die.HeelpostBuilder
-
Returns the offset value to apply to the pad orientation before building the heelpost
License requirements: None.
- padOrientation() - Method in interface nxopen.die.HeelpostBuilder
-
Returns the orientation at the top of the heelpost
License requirements: None.
- PadParentBuilder - Interface in nxopen.die
-
Represents a Die Pad Parent sub feature.
- PadParentBuilder.HoleAttributesData - Class in nxopen.die
-
- PadParentBuilder.PadAttributesData - Class in nxopen.die
-
- PadParentBuilder.ShapeTypeOption - Class in nxopen.die
-
Settings for the shape type of the die pads.
- padRadius() - Method in interface nxopen.die.ClampingSlotBuilder
-
Returns the radius of the pad at the back corners
License requirements: None.
- padThickness() - Method in interface nxopen.die.HeelpostBuilder
-
Returns the pad thickness at the top of the post
License requirements: None.
- padvalue - Variable in class nxopen.cae.ThicknessBuilder.ElementThicknessData
-
array of Element Nodal thickness
- padWidth() - Method in interface nxopen.die.ClampingSlotBuilder
-
Returns the width of the pad
License requirements: None.
- padWidth() - Method in interface nxopen.die.KeywayBuilder
-
Returns the expression for the pad width
License requirements: None.
- padWidth() - Method in interface nxopen.die.KeywayChildBuilder
-
Returns the pad width of the keyway.
- padWidth() - Method in interface nxopen.die.KeywayParentBuilder
-
Returns the pad width of keyways.
- PAGE - Static variable in class nxopen.ame.InstantiateTemplateBulkBuilder.PlacementType
-
- PAGE - Static variable in class nxopen.ame.OrderAspectsBuilder.OrderType
-
- PAGE_MACROS - Static variable in class nxopen.ame.PlcSymbolsEvaluatorBuilder.FilterType
-
- PAGE_NUMBER - Static variable in class nxopen.cae.xyplot.ModelType
-
- PAGE_NUMBER - Static variable in class nxopen.cae.xyplot.TextType
-
Page number label
- PAGE_OBJECT - Static variable in class nxopen.ame.AmeDebugSession.ObjectType
-
- PAGE_PLACED_OBJECTS - Static variable in class nxopen.ame.SelectAndHighlightBuilder.SelType
-
- PageAttributeHolder - Interface in nxopen.ame
-
Page Object Atributes Holder
This does not need a creator.
- pageAttributeHolder() - Method in interface nxopen.ame.PageBuilder
-
Returns the attribute holder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- PageBuilder - Interface in nxopen.ame
-
- PageBuilder.Types - Class in nxopen.ame
-
Represents the type of page
- pageIncrement() - Method in interface nxopen.blockstyler.AngularDimension
-
Returns the PageIncrement value.
- pageIncrement() - Method in interface nxopen.blockstyler.DoubleBlock
-
Returns the PageIncrement
License requirements: None.
- pageIncrement() - Method in interface nxopen.blockstyler.ExpressionBlock
-
Returns the PageIncrement value.
- pageIncrement() - Method in interface nxopen.blockstyler.IntegerBlock
-
Returns the PageIncrement
License requirements: None.
- pageIncrement() - Method in interface nxopen.blockstyler.LinearDimension
-
Returns the PageIncrement value.
- pageIncrement() - Method in interface nxopen.blockstyler.OnPathDimension
-
Returns the PageIncrement value.
- pageIncrement() - Method in interface nxopen.blockstyler.RadiusDimension
-
Returns the PageIncrement value.
- pageName() - Method in interface nxopen.ame.PageBuilder
-
Returns the Page name
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- PageNamingBuilder - Interface in nxopen.ame
-
- PageNode - Interface in nxopen.ame
-
Represents a Page Node
This object can not be created directly.
- PageObject - Interface in nxopen.ame
-
Represents a Page Object
This object does not need a creator.
- pageOrientation() - Method in interface nxopen.cam.InspectionGraphicalReportOutputBuilder
-
Returns the page orientation
License requirements: None.
- pageOrientation() - Method in interface nxopen.cam.WorkInstructionOutputBuilder
-
Returns the page orientation
License requirements: None.
- pagesAutomaticallyFlyOut() - Method in interface nxopen.preferences.SessionUserInterfaceUI
-
Returns the pages automatically fly outflag
License requirements: None.
- pageSize() - Method in interface nxopen.cam.InspectionGraphicalReportOutputBuilder
-
Returns the page size
License requirements: None.
- pageSize() - Method in interface nxopen.cam.WorkInstructionOutputBuilder
-
Returns the page size
License requirements: None.
- pageSwitch(StylerEvent) - Method in interface nxopen.uistyler.DialogItem.PageSwitch
-
Called when a user switches tabs.
- PageSwitchData - Interface in nxopen.uistyler
-
Represents a PageSwitchData for UI Styler .
- pageSwitchData() - Method in interface nxopen.uistyler.TabControl
-
Returns the page switch data
License requirements: None.
- paintBodiesBackgroundColor(DisplayableObject[]) - Method in interface nxopen.facet.PaintFacetBodyBuilder
-
Paints facets background color.
- paintBrush() - Method in interface nxopen.facet.PaintFacetBodyBuilder
-
- PaintBrushBuilder - Interface in nxopen.facet
-
This class manages the paint brush utility for a facet body.
- paintBrushSize() - Method in interface nxopen.facet.PaintFacetBodyBuilder
-
- paintDisplay() - Method in interface nxopen.cam.MethodBuilder
-
Returns the sub builder for paint display
License requirements: None.
- paintDisplay() - Method in interface nxopen.cam.OperationDisplayOptionsBuilder
-
Returns the sub builder for paint display
License requirements: None.
- PaintFacetBodyBuilder - Interface in nxopen.facet
-
This class manages the color painting on a facet body.
- paintFacetsBackGroundColor(FacetedBody[]) - Method in interface nxopen.facet.PaintFacetBodyBuilder
-
- PaintParametersBuilder - Interface in nxopen.features
-
Represents a paint feature parameters builder.
- paintSelectedFacets() - Method in interface nxopen.facet.PaintFacetBodyBuilder
-
Paints selected facets.
- paintVertexColor(Point3d) - Method in interface nxopen.facet.PaintBrushBuilder
-
Paints facet body vertex color
License requirements: None.
- PAIR - Static variable in class nxopen.assemblies.ClearanceAnalysisBuilder.ClearanceZoneSource
-
- PAIR - Static variable in class nxopen.assemblies.ClearanceAnalysisBuilder.ZoneType
-
- PAIR - Static variable in class nxopen.geometricanalysis.SurfaceContinuityAnalysisBuilder.ReportingType
-
- PairClearanceZoneData() - Constructor for class nxopen.assemblies.ClearanceAnalysisBuilder.PairClearanceZoneData
-
- pairingMethod() - Method in interface nxopen.cae.connections.INodalTargetsPairing
-
Returns the pairing method of targets
License requirements: None.
- pairingStrategy() - Method in interface nxopen.features.MidSurfaceByFacePairsBuilder
-
Returns the pairing strategy used by automatic pairs
License requirements: None.
- pairSegment() - Method in interface nxopen.routing.SegmentPairBuilder
-
Returns the list item of Segment Pairs
License requirements: routing_base ("Routing Basic")
.
- PALE_AQUA_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- PALE_AZURE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- PALE_BLUE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- PALE_BROWN_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- PALE_CARROT_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- PALE_COBALT_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- PALE_CORAL_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- PALE_CORNFLOWER_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- PALE_CRIMSON_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- PALE_CYAN_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- PALE_DULL_AZURE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- PALE_DULL_BLUE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- PALE_DULL_CYAN_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- PALE_DULL_GREEN_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- PALE_DULL_MAGENTA_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- PALE_DULL_ORANGE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- PALE_DULL_PINK_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- PALE_DULL_RED_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- PALE_DULL_SPRING_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- PALE_DULL_TEAL_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- PALE_DULL_VIOLET_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- PALE_DULL_YELLOW_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- PALE_EMERALD_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- PALE_FOREST_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- PALE_FUCHSIA_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- PALE_GOLD_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- PALE_GRAY_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- PALE_GREEN_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- PALE_ICE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- PALE_INDIGO_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- PALE_KHAKI_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- PALE_LAVENDER_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- PALE_LEAF_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- PALE_LEMON_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- PALE_LIME_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- PALE_MAGENTA_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- PALE_MAROON_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- PALE_MIDNIGHT_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- PALE_MINT_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- PALE_MOSS_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- PALE_OLIVE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- PALE_ORANGE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- PALE_PEACH_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- PALE_PINE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- PALE_PINK_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- PALE_PISTACHIO_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- PALE_PLUM_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- PALE_PURPLE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- PALE_RED_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- PALE_ROYAL_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- PALE_SALMON_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- PALE_SEA_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- PALE_SKY_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- PALE_SPRING_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- PALE_STEEL_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- PALE_STONE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- PALE_TAN_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- PALE_TEAL_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- PALE_TORQUOISE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- PALE_UMBER_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- PALE_VIOLET_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- PALE_WEAK_BLUE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- PALE_WEAK_CYAN_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- PALE_WEAK_GREEN_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- PALE_WEAK_MAGENTA_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- PALE_WEAK_RED_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- PALE_WEAK_YELLOW_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- PALE_YELLOW_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- PALLET - Static variable in class nxopen.tooling.ElectrodeComponentBuilder.Chuck
-
- PANEL - Static variable in class nxopen.features.VarOffsetFaceBuilder.Types
-
- panel() - Method in interface nxopen.weld.SurfaceWeldBuilder
-
Returns the collector containing the faces to create the surface weld on.
- panelSketchSection() - Method in interface nxopen.features.shipdesign.RoomPanelBuilder
-
Returns the panel sketch section
License requirements: None.
- pangle() - Method in interface nxopen.cae.ElementTranslateBuilder
-
Returns the phi angle for translation in a spherical coordinate system
License requirements: None.
- pangle() - Method in interface nxopen.cae.NodeCreateBuilder
-
Returns the p angle
License requirements: None.
- pangle() - Method in interface nxopen.cae.NodeTranslateBuilder
-
Returns the p angle
License requirements: None.
- panView(Tag, double[]) - Method in interface nxopen.uf.UFView
-
- paper() - Method in interface nxopen.PrintBuilder
-
Returns the paper.
- Parabola - Interface in nxopen
-
Represents a parabola curve.
- Parabola() - Constructor for class nxopen.uf.UFEval.Parabola
-
- Parabola(double[], double, double[], double[], double[]) - Constructor for class nxopen.uf.UFEval.Parabola
-
- PARABOLA_GEOM - Static variable in class nxopen.uf.UFBrep.GeomType
-
- ParabolaCollection - Interface in nxopen
-
Represents a collection of Parabolas
To obtain an instance of this class, refer to
BasePart
Created in NX3.0.0
- parabolas() - Method in interface nxopen.BasePart
-
Returns the ParabolaCollection instance belonging to this part .
- PARABOLIC - Static variable in class nxopen.cae.AfuData.ExtrapolationType
-
Parabolic Extrapolation
- PARABOLIC - Static variable in class nxopen.cae.ElementTypeBuilder.ElementOrderType
-
parabolic element
- PARABOLIC - Static variable in class nxopen.cae.ElementTypes.Order
-
Parabolic
- PARABOLIC - Static variable in class nxopen.fields.FieldEvaluator.ValuesOutsideTableInterpolationEnum
-
Extrapolates from the boundary out into space using the parabolic extrapolation method
- PARABOLIC - Static variable in class nxopen.tooling.RunnerBuilder.SectionType
-
Use parabolic section type.
- parallaxFactor() - Method in interface nxopen.preferences.SessionVisualizationSpecialEffects
-
Returns the parallax factor.
- PARALLEL - Static variable in class nxopen.annotations.ChamferLeaderPlacement
-
Specifies leader parallel to the chamfer
- PARALLEL - Static variable in class nxopen.annotations.ChamferOrientationType
-
parallel to the chamfer line itself
- PARALLEL - Static variable in class nxopen.annotations.CuttingPlaneSymbolBuilder.TextPlaneRelativeArrow
-
The Plane of the PMI Cutting Plane Symbol Text is Parallel to its Arrow.
- PARALLEL - Static variable in class nxopen.annotations.DimensionType
-
Parallel dimension
- PARALLEL - Static variable in class nxopen.annotations.FeatureControlFrameIndicatorBuilder.FcfIndicatorCharacteristic
-
- PARALLEL - Static variable in class nxopen.annotations.GeometricCharacteristic
-
Specifies parallel characteristics
- PARALLEL - Static variable in class nxopen.annotations.NarrowTextOrientation
-
Specifies parallel text orientation
- PARALLEL - Static variable in class nxopen.DatumConstraint.Type
-
- PARALLEL - Static variable in class nxopen.display.CameraBuilder.Types
-
Parallel Projection
- PARALLEL - Static variable in class nxopen.drawings.BrokenViewBuilder.TypeDirection
-
Parallel
- PARALLEL - Static variable in class nxopen.features.DatumAxisBuilder.ConstraintType
-
Parallel constraint
- PARALLEL - Static variable in class nxopen.features.DatumPlaneBuilder.ConstraintType
-
Parallel constraint
- PARALLEL - Static variable in class nxopen.features.GlobalShapingBuilder.TargetCurveOrientationType
-
Target curve is parallel to the limit curves.
- Parallel - Interface in nxopen.features
-
Represents a parallel feature
To create or edit an instance of this class, use
ParallelBuilder
Created in NX6.0.0
- PARALLEL - Static variable in class nxopen.features.SectionCurveBuilder.PlaneType
-
Set of planes parallel to a base plane
- PARALLEL - Static variable in class nxopen.geometricanalysis.sectionanalysis.SectionAnalysisBuilder.Types
-
Parallel Planes
- parallel() - Method in interface nxopen.InferredConstraintsBuilder
-
Returns the parallel infer-constraint setting.
- PARALLEL - Static variable in class nxopen.mechatronics.SpeedPositionControlDirectiontype
-
parallel
- PARALLEL - Static variable in class nxopen.motion.JointDefine.Type
-
This joint type indicates a four degrees of freedom(1R + 3T DOF) primitive that allows
both translational and rotational motion of one part with respect to another .
- PARALLEL - Static variable in class nxopen.PlaneTypes.MethodType
-
Parallel method
- PARALLEL - Static variable in class nxopen.positioning.Constraint.Type
-
Two geometries are parallel
- PARALLEL - Static variable in class nxopen.PositioningDimension.Subtype
-
Parallel dimension
- PARALLEL - Static variable in class nxopen.Sketch.ConstraintType
-
- parallel() - Method in interface nxopen.SketchAutoConstrainBuilder
-
Returns the parallel
License requirements: None.
- PARALLEL - Static variable in class nxopen.SketchConstraintBuilder.Constraint
-
- parallel - Variable in class nxopen.uf.UFModeling.AskParaEdgeData
-
- PARALLEL - Static variable in class nxopen.uf.UFSket.ConType
-
- parallel2dComponentEnabled() - Method in interface nxopen.features.CurveFinderBuilder
-
Returns a value that indicates whether add parallel 2d component relation recognition for the last curves added to curve collector
License requirements: None.
- PARALLEL_CON - Static variable in class nxopen.uf.UFModl.DfoConstraintType
-
- PARALLEL_DEVIATION - Static variable in class nxopen.cae.modelcheck.TestValueTypes.TestType
-
- PARALLEL_DIM - Static variable in class nxopen.Sketch.ConstraintType
-
- PARALLEL_DIM - Static variable in class nxopen.uf.UFSket.ConType
-
- PARALLEL_DISTANCE - Static variable in class nxopen.PositioningDimension.Subtype
-
Parallel at a distance dimension
- PARALLEL_LINES - Static variable in class nxopen.cam.DmAmBuilder.AmCutPatternTypes
-
Parallel Lines
- PARALLEL_LINES - Static variable in class nxopen.cam.DmBndBuilder.BndCutPatternTypes
-
Parallel Lines
- PARALLEL_LINES - Static variable in class nxopen.cam.DmSurfBuilder.DmSurfCutPatternType
-
Skip
- PARALLEL_LINES - Static variable in class nxopen.cam.GuidedCurveBuilder.GcCutPatternTypes
-
Parallel Lines
- PARALLEL_MODE_LAST_ELEMENT - Static variable in class nxopen.uf.UFPath.ParallelMode
-
- PARALLEL_MODE_NONE - Static variable in class nxopen.uf.UFPath.ParallelMode
-
- PARALLEL_PLANE - Static variable in class nxopen.features.shipdesign.RollingLineBuilder.ConstructionMethodTypes
-
Use a parallel plane approach to develop the pressure line.
- PARALLEL_PLANES - Static variable in class nxopen.geometricanalysis.sectionanalysis.SectionAnalysisExBuilder.AlignmentType
-
The cutting planes are parallel to a specified plane
- PARALLEL_POINT - Static variable in class nxopen.PlaneTypes.MethodType
-
Parallel to plane through point method
- PARALLEL_PROJECT_VECTORS - Static variable in class nxopen.uf.UFConstants
-
- PARALLEL_SECTIONS - Static variable in class nxopen.features.SectionInertiaAnalysisBuilder.Types
-
Parallel Sections Type
- PARALLEL_TANGENT - Static variable in class nxopen.features.vehicledesign.DynamicCurbBuilder.MethodType
-
- PARALLEL_TO - Static variable in class nxopen.cam.InspectionConstructedFeatureBuilder.MethodEnumType
-
Creates a feature parallel to a feature and through another feature
- PARALLEL_TO_BODY - Static variable in class nxopen.features.SweptVolumeBuilder.SweepOrient
-
ParallelToBody
- PARALLEL_TO_LINE - Static variable in class nxopen.features.shipdesign.StiffenerBySupportPathBuilder.Method
-
Parallel to Line
- PARALLEL_TO_OBJECT - Static variable in class nxopen.features.DatumAxisBuilder.CurveOrientations
-
Orientation at parallel to object
- PARALLEL_TO_TOOLAXIS - Static variable in class nxopen.cam.SplitSubopCommand.LinePlaneTypes
-
Line plane parallel to tool axis
- PARALLEL_TO_VECTOR - Static variable in class nxopen.features.DatumAxisBuilder.DirectionOrientations
-
Orientation parallel to Direction
- PARALLEL_TO_VECTOR - Static variable in class nxopen.geometricutilities.PatternOrientation.Enum
-
parallel to vector orientation for Along Type first direction.
- PARALLEL_TO_VECTOR - Static variable in class nxopen.PlaneTypes.FrenetSubtype
-
Parallel to a vector
- PARALLEL_TO_VECTOR - Static variable in class nxopen.SketchAlongPathBuilder.PlaneOrientationType
-
Parallel to Vector
- PARALLEL_TYPE - Static variable in class nxopen.uf.UFGdt.Characteristic
-
- PARALLEL_VAXIS - Static variable in class nxopen.uf.UFPath.ParallelMode
-
- PARALLEL_WAXIS - Static variable in class nxopen.uf.UFPath.ParallelMode
-
- PARALLEL_XCPLANES - Static variable in class nxopen.weld.EasyPatternBuilder.PlaneMethodTypes
-
Patterns are on the XC plane.
- PARALLEL_XPLANE - Static variable in class nxopen.weld.JointmarkGuideBuilder.SpaceMethod
-
Parallel X Plane
- PARALLEL_XPLANE - Static variable in class nxopen.weld.WeldSpacingCalcMethod
-
spaces based on parallel x planes
- PARALLEL_YCPLANES - Static variable in class nxopen.weld.EasyPatternBuilder.PlaneMethodTypes
-
Patterns are on the YC plane.
- PARALLEL_YPLANE - Static variable in class nxopen.weld.JointmarkGuideBuilder.SpaceMethod
-
Parallel Y Plane
- PARALLEL_YPLANE - Static variable in class nxopen.weld.WeldSpacingCalcMethod
-
spaces based on parallel y planes
- PARALLEL_ZAXIS - Static variable in class nxopen.uf.UFPath.ParallelMode
-
- PARALLEL_ZCPLANES - Static variable in class nxopen.weld.EasyPatternBuilder.PlaneMethodTypes
-
Patterns are on the ZC plane.
- PARALLEL_ZPLANE - Static variable in class nxopen.weld.JointmarkGuideBuilder.SpaceMethod
-
Parallel Z Plane
- PARALLEL_ZPLANE - Static variable in class nxopen.weld.WeldSpacingCalcMethod
-
spaces based on parallel z planes
- ParallelBuilder - Interface in nxopen.features
-
- parallelCreate3d(CAMObject[]) - Method in interface nxopen.cam.CAMSetup
-
Parallel create 3D
License requirements: cam_base ("CAM BASE")
.
- parallelData - Variable in class nxopen.uf.UFCurve.SectionAskParallelData
-
- ParallelDimension - Interface in nxopen.annotations
-
Represents a parallel dimension
To create or edit an instance of this class, use
LinearDimensionBuilder
Created in NX4.0.0
- parallelEnabled() - Method in interface nxopen.features.CurveFinderBuilder
-
Returns a value that indicates whether add parallel relation recognition for the last curves added to curve collector
License requirements: None.
- parallelEnabled() - Method in interface nxopen.features.FaceRecognitionBuilder
-
Returns a value that indicates whether parallel relation recognition is enabled
License requirements: None.
- parallelGenerate(CAMObject[]) - Method in interface nxopen.cam.CAMSetup
-
Parallel Generate tool path
License requirements: cam_base ("CAM BASE")
.
- parallelInitialPosition() - Method in interface nxopen.mechatronics.TransportSurfaceBuilder
-
Returns the initial position in parallel direction.
- PARALLELISM - Static variable in class nxopen.annotations.FeatureControlFrameBuilder.FcfCharacteristic
-
parallelism
- PARALLELISM - Static variable in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.CharacteristicOptions
-
parallelism
- PARALLELISM - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.TolType
-
Parallelism
- PARALLELOGRAM - Static variable in class nxopen.geometricutilities.QuadrilateralFrameBuilder.Subtypes
-
Parallelogram
- PARALLELOGRAM - Static variable in class nxopen.tooling.BlankNestingBuilder.LayoutTypeSpecification
-
Auto-position blank along x-axis with parallelogram bounding box.
- PARALLELOGRAM55 - Static variable in class nxopen.cam.TurnToolBuilder.InsertShapes
-
Insert shape: Parallelogram 55
- PARALLELOGRAM82 - Static variable in class nxopen.cam.TurnToolBuilder.InsertShapes
-
Insert shape: Parallelogram 82
- PARALLELOGRAM85 - Static variable in class nxopen.cam.TurnToolBuilder.InsertShapes
-
Insert shape: Parallelogram 85
- parallelPlanes() - Method in interface nxopen.geometricanalysis.sectionanalysis.SectionAnalysisExBuilder
-
Returns the Parallel Planes section specification.
- ParallelPlanesExBuilder - Interface in nxopen.geometricanalysis.sectionanalysis
-
- parallelReferenceObject() - Method in interface nxopen.ame.MountingInterfaceBuilder
-
Returns the parallel reference object
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- parallelReinforcement() - Method in interface nxopen.routing.DuctReinforcementBuilder
-
Returns the stock settings for parallel reinforcements
License requirements: routing_hvac ("Routing HVAC")
.
- parallelSketchGroupEnabled() - Method in interface nxopen.features.CurveFinderBuilder
-
Returns a value that indicates whether add parallel relation recognition for the last curves added to curve collector
License requirements: None.
- PARALLELTO_ROUTE - Static variable in class nxopen.features.shipdesign.PenetrationRequest.DirectionType
-
- PARALLELTO_SECTION_PLANE - Static variable in class nxopen.features.RibBuilder.RibTypes
-
Parallel to Section Plane
- PARALLELTO_VIEW - Static variable in class nxopen.display.BoundedGridBuilder.ShowLabelType
-
Show labels when grid
orientation is aligned with
the view orientation
- parallelToScreen() - Method in interface nxopen.annotations.Annotation
-
Returns the PMI parallel to screen setting
License requirements: None.
- parallelToScreen() - Method in interface nxopen.annotations.DisplayStyleBuilder
-
Returns the PMI parallel to screen setting
License requirements: None.
- parallelToScreen() - Method in interface nxopen.annotations.PmiPreferences
-
Returns the parallel to screen option
License requirements: None.
- parallelVelocity() - Method in interface nxopen.mechatronics.TransportSurfaceBuilder
-
Returns the parallel velocity.
- PARAM - Static variable in class nxopen.mechatronics.ExpressionBlockBuilder.SlotType
-
Param that is used to configure the block to differentiate mode
- param() - Method in interface nxopen.UFSession
-
- PARAM_ACTIVE - Static variable in class nxopen.uf.UFUde.ParamToggle
-
- PARAM_END_EVENT - Static variable in class nxopen.cam.ToolpathEventType
-
- PARAM_INACTIVE - Static variable in class nxopen.uf.UFUde.ParamToggle
-
- PARAM_START_EVENT - Static variable in class nxopen.cam.ToolpathEventType
-
- PARAM_TYPE_BOOLEAN - Static variable in class nxopen.uf.UFUde.ParamType
-
- PARAM_TYPE_DOUBLE - Static variable in class nxopen.uf.UFUde.ParamType
-
- PARAM_TYPE_INT - Static variable in class nxopen.uf.UFUde.ParamType
-
- PARAM_TYPE_OPTION - Static variable in class nxopen.uf.UFUde.ParamType
-
- PARAM_TYPE_POINT - Static variable in class nxopen.uf.UFUde.ParamType
-
- PARAM_TYPE_STRING - Static variable in class nxopen.uf.UFUde.ParamType
-
- PARAM_TYPE_VECTOR - Static variable in class nxopen.uf.UFUde.ParamType
-
- ParamBuilder - Interface in nxopen.cam
-
Represents a manufacturing object builder.
- ParamBuilder.OptimizationTypes - Class in nxopen.cam
-
Available types for Optimization Method in operation
- PARAMETER - Static variable in class nxopen.cam.SimulationOptionsBuilder.ToolShapeColl
-
use parametric tool shape
- PARAMETER - Static variable in class nxopen.cam.SimulationOptionsBuilder.ToolShapeMR
-
use parametric tool shape
- parameter - Variable in class nxopen.features.EdgeBlendBuilder.VariableRadiusData
-
Parameter locations of points on the edge
- parameter - Variable in class nxopen.geometricanalysis.GeometricProperties.Edge
-
Curve Parameter
- PARAMETER - Static variable in class nxopen.geometricutilities.AlignmentMethodBuilder.Type
-
- parameter() - Method in interface nxopen.geometricutilities.DraftPointData
-
Returns the point coordinates
License requirements: solid_modeling ("SOLIDS MODELING")
.
- parameter() - Method in interface nxopen.geometricutilities.LawBuilder
-
Returns the parameter.
- PARAMETER - Static variable in class nxopen.PointCollection.PointOnCurveLocationOption
-
Scalar is curve parameter.
- parameter - Variable in class nxopen.Sketch.ConstraintGeometryHelp
-
Ignored unless type is Parameter.
- PARAMETER - Static variable in class nxopen.Sketch.ConstraintGeometryHelpType
-
- parameter() - Method in interface nxopen.tooling.ForceCalculationBuilder
-
Returns the parameter expression to calculate the process force.
- parameter - Variable in class nxopen.uf.UFCurve.HelpData
-
- parameter - Variable in class nxopen.uf.UFModl.BlendPoint
-
- parameter - Variable in class nxopen.uf.UFModl.BlendPointData
-
- parameter - Variable in class nxopen.uf.UFModlFeatures.AskResizeFaceData
-
- parameter - Variable in class nxopen.uf.UFModlGeneral.AskPointAlongCurve2Data
-
- parameter - Variable in class nxopen.uf.UFRoute.AskSegmentEndPropsData
-
- parameter - Variable in class nxopen.uf.UFSo.SplineData
-
- PARAMETER_ARC_LENGTH - Static variable in class nxopen.features.AeroFlangeBuilder.PointOption
-
- PARAMETER_ARC_LENGTH - Static variable in class nxopen.features.AeroRibBuilder.PointOption
-
- parameterActive() - Method in interface nxopen.cam.UdeParameter
-
Returns the check to see if paramter is active
License requirements: None.
- parameterBuilderList() - Method in interface nxopen.mechatronics.RuntimeFormulaBuilder
-
Returns the formula parameter list.
- ParameterData() - Constructor for class nxopen.cam.PreprocessGeometryBuilder.ParameterData
-
- ParameterData() - Constructor for class nxopen.mechatronics.FunctionObjectBuilder.ParameterData
-
- ParameterData(String, String) - Constructor for class nxopen.mechatronics.FunctionObjectBuilder.ParameterData
-
Constructor for the ParameterData object.
- ParameterData() - Constructor for class nxopen.mechatronics.LogicObjectBuilder.ParameterData
-
- ParameterData(String, String) - Constructor for class nxopen.mechatronics.LogicObjectBuilder.ParameterData
-
Constructor for the ParameterData object.
- ParameterData() - Constructor for class nxopen.mechatronics.SensorsActuatorsListBuilder.ParameterData
-
- ParameterData(String, String) - Constructor for class nxopen.mechatronics.SensorsActuatorsListBuilder.ParameterData
-
Constructor for the ParameterData object.
- ParameterData() - Constructor for class nxopen.mechatronics.SignalAdapterBuilder.ParameterData
-
- ParameterData(String, NXObject, int, AdapterFormula, String, String) - Constructor for class nxopen.mechatronics.SignalAdapterBuilder.ParameterData
-
Constructor for the ParameterData object.
- parameterDirection() - Method in interface nxopen.features.IFormBuilder
-
Returns the iso-parameter direction
License requirements: None.
- parameterExp - Variable in class nxopen.features.EdgeBlendBuilder.VariableRadiusDataNewData
-
Parameter value of points on the edge
- parameterization() - Method in interface nxopen.features.EdgeSymmetryBuilder
-
Returns the surface parameterization
License requirements: None.
- parameterization() - Method in interface nxopen.features.FitSurfaceBuilder
-
Returns the parameterization
License requirements: None.
- parameterizeddatapoints - Variable in class nxopen.fields.SpatialMapBuilder.CreateLatticeMapData
-
- parameterLength() - Method in interface nxopen.geometricutilities.SpinePointData
-
Returns the parameter in arc length
License requirements: None.
- parameterList() - Method in interface nxopen.annotations.SymbolCatalogBuilder
-
Returns the list containing the parameters used to create the symbol.
- parameterList() - Method in interface nxopen.mechatronics.GanttOperationBuilder
-
Returns the parameter data
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- parameterList() - Method in interface nxopen.mechatronics.ProxyObjectBuilder
-
Returns the parameter data
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- parameterList() - Method in interface nxopen.mechatronics.ProxyOverrideObjectBuilder
-
Returns the parameter data
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- parameterName() - Method in interface nxopen.display.IrayPlusMaterialAttribute
-
Returns the parameter name of specific material object.
- parameterName - Variable in class nxopen.mechatronics.FunctionObjectBuilder.ParameterData
-
Parameter name
- parameterName() - Method in interface nxopen.mechatronics.GanttOperationParameterBuilder
-
Returns the parameter name
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- parameterName - Variable in class nxopen.mechatronics.LogicObjectBuilder.ParameterData
-
Parameter name
- parameterName() - Method in interface nxopen.tooling.SpreadsheetDataParameter
-
Returns the name of the parameter
License requirements: None.
- parameterNames - Variable in class nxopen.uf.UFKf.AskParametersData
-
- ParameterNamesAndTypesByIDData() - Constructor for class nxopen.mechatronics.TagTableBuilder.ParameterNamesAndTypesByIDData
-
- ParameterNamesAndTypesData() - Constructor for class nxopen.mechatronics.ParameterStockBuilder.ParameterNamesAndTypesData
-
- parameterObject() - Method in interface nxopen.cae.DurSpecialistSimulationObject
-
Returns the ParameterObject.
- parameterObjectConnection() - Method in interface nxopen.ame.CallMethodRuleBuilder
-
Returns the parameter object connection ui block
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- parameterObjects() - Method in interface nxopen.cae.DurSpecialistManager
-
- parameterOnElement - Variable in class nxopen.uf.UFDrf.SymbolInstance
-
- parameterOptional() - Method in interface nxopen.cam.UdeParameter
-
Returns the check to see if the parameter is optional
License requirements: None.
- parameterPercent() - Method in interface nxopen.geometricutilities.SpinePointData
-
Returns the parameter in percent arc length
License requirements: None.
- parameterPercentage - Variable in class nxopen.geometricanalysis.GeometricProperties.Edge
-
Curve Parameter Percentage
- parameterPhysics() - Method in interface nxopen.mechatronics.RuntimeFormulaParameterBuilder
-
Returns the ParameterPhysics
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- parameterRange - Variable in class nxopen.uf.UFBound.MemberData
-
- ParameterRule() - Constructor for class nxopen.RuleManager.ParameterRule
-
- ParameterRule(String, String) - Constructor for class nxopen.RuleManager.ParameterRule
-
Constructor for the ParameterRule object.
- ParameterRuleBuilder - Interface in nxopen.ame
-
- ParameterRuleBuilder.Connection - Class in nxopen.ame
-
connection Type
- parameterRuleType() - Method in interface nxopen.ame.OperatorRuleBuilder
-
Returns the Select Parameter
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- parameters() - Method in interface nxopen.cae.Laminate
-
Returns the intrinsic laminate properties that are not solver-specific
License requirements: None.
- parameters() - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarBuilder
-
- parameters() - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarBuilder
-
- parameters() - Method in interface nxopen.features.vehicledesign.HeadImpactFrontHeaderBuilder
-
- parameters() - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarBuilder
-
- parameters() - Method in interface nxopen.features.vehicledesign.HeadImpactOtherRailBuilder
-
- parameters() - Method in interface nxopen.features.vehicledesign.HeadImpactRearHeaderBuilder
-
- parameters() - Method in interface nxopen.features.vehicledesign.HeadImpactRPillarBuilder
-
- parameters() - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailBuilder
-
- parameters() - Method in interface nxopen.features.vehicledesign.HeadImpactUpperRoofBuilder
-
- PARAMETERS - Static variable in class nxopen.Information.DisplayFeatureType
-
Displays parameters information.
- parameters - Variable in class nxopen.uf.UFCurve.AskSplineThruPtsData
-
- Parameters() - Constructor for class nxopen.uf.UFFacet.Parameters
-
- Parameters(int, int, boolean, double, double, boolean, double, double, double, boolean, boolean, double, int, boolean, boolean, double[], double, boolean) - Constructor for class nxopen.uf.UFFacet.Parameters
-
- ParametersData() - Constructor for class nxopen.Ellipse.ParametersData
-
- parametersData() - Method in interface nxopen.features.MeshSurfaceBuilder
-
Returns
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- parametersInUserControl() - Method in interface nxopen.features.shipdesign.ProfileCutoutBuilder
-
Returns the flag to indicate if the profile cutout detail parameters have been modified by user.
- parameterSpine() - Method in interface nxopen.features.AestheticFaceBlendBuilder
-
Returns the parameter spine
License requirements: None.
- parameterStatus() - Method in interface nxopen.tooling.SpreadsheetDataParameter
-
Returns the status of the parameter
License requirements: None.
- parameterStock() - Method in interface nxopen.mechatronics.TagFormBuilder
-
Returns the parameter stock builder that holds the parameter data.
- ParameterStockBuilder - Interface in nxopen.mechatronics
-
- ParameterStockBuilder.Assignment - Class in nxopen.mechatronics
-
the assignment for runtime property.
- ParameterStockBuilder.BoolParameterData - Class in nxopen.mechatronics
-
- ParameterStockBuilder.DataType - Class in nxopen.mechatronics
-
the data type for parameter value.
- ParameterStockBuilder.IntParameterData - Class in nxopen.mechatronics
-
- ParameterStockBuilder.ListParameterData - Class in nxopen.mechatronics
-
- ParameterStockBuilder.ParameterNamesAndTypesData - Class in nxopen.mechatronics
-
- ParameterStockBuilder.RealParameterData - Class in nxopen.mechatronics
-
- ParameterStockBuilder.StringParameterData - Class in nxopen.mechatronics
-
- parameterText() - Method in interface nxopen.ame.CallMethodRuleBuilder
-
Returns the constantText of a parameter
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- parameterText() - Method in interface nxopen.tooling.ForceCalculationBuilder
-
Returns the parameter text.
- parameterValue - Variable in class nxopen.mechatronics.FunctionObjectBuilder.ParameterData
-
Parameter value
- parameterValue() - Method in interface nxopen.mechatronics.GanttOperationParameterBuilder
-
Returns the parameter value which will be set to the input physics object during runtime.
- parameterValue - Variable in class nxopen.mechatronics.LogicObjectBuilder.ParameterData
-
Parameter value
- parameterValue() - Method in interface nxopen.tooling.SpreadsheetDataParameter
-
Returns the value of the parameter
License requirements: None.
- PARAMETRIC - Static variable in class nxopen.cam.FeatureRecognitionBuilder.RecognitionEnum
-
Parametric Feature Recognition
- PARAMETRIC - Static variable in class nxopen.diagramming.AnnotationBuilder.TextTypeOption
-
Setting the text type parametric
- PARAMETRIC - Static variable in class nxopen.Face.FaceType
-
Parametric face
- PARAMETRIC - Static variable in class nxopen.facet.FacetedFace.FacetedfaceType
-
Parametric face
- PARAMETRIC - Static variable in class nxopen.routing.SplinePathBuilder.DefiningTypes
-
The defining type represents a G1-continuous, parametric curve.
- PARAMETRIC_CURVE - Static variable in class nxopen.positioning.ConstraintReference.GeometryType
-
Parametric curve
- PARAMETRIC_LINE - Static variable in class nxopen.fields.SpatialMap.TypeEnum
-
Map to parametric line
- PARAMETRIC_PLANE - Static variable in class nxopen.fields.SpatialMap.TypeEnum
-
- PARAMETRIC_SPACE - Static variable in class nxopen.fields.SpatialMap.TypeEnum
-
- PARAMETRIC_SURFACE - Static variable in class nxopen.positioning.ConstraintReference.GeometryType
-
Parametric surface
- parametricPlaneMap() - Method in interface nxopen.fields.SpatialMapBuilder
-
Returns the parametric plane map
License requirements: None.
- paramId() - Method in interface nxopen.mechatronics.ProxyObjectParameterBuilder
-
Returns the maximum parameter id of parameter attribute in proxy object
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- paramNames - Variable in class nxopen.uf.UFUde.AskParamsData
-
- paramRange - Variable in class nxopen.uf.UFCurve.AskParameterizationData
-
- ParamRedefineState - Class in nxopen.motion
-
Defines the redefine state of a property of an occurrence of an object in the assembly.
- params - Variable in class nxopen.uf.UFDraw.AskTabularNoteParamsData
-
- params - Variable in class nxopen.uf.UFDraw.ReadTabnotCellData
-
- params - Variable in class nxopen.uf.UFFacet.AskParamsOfFacetData
-
- params - Variable in class nxopen.uf.UFModeling.AskFaceMinRadiiData
-
- paramsMode - Variable in class nxopen.uf.UFPart.ExportOptions
-
- ParamValueIntent - Class in nxopen.cam
-
The source of values for design logic enum component within status components .
- paranames - Variable in class nxopen.tooling.ElectrodeCopyBuilder.UpdateParameterData
-
parameter name
- parantheses() - Method in interface nxopen.annotations.DraftingSurfaceFinishBuilder
-
- parantheses() - Method in interface nxopen.annotations.SurfaceFinishBuilder
-
- PARASOLID_FORMAT - Static variable in class nxopen.uf.UFMotion.AnlGeometryFormat
-
- parasolidbodyid - Variable in class nxopen.features.CustomFeatureCreateFeatureGeometryEvent.CopyNXBodyData
-
The Parasolid id of copied body
- parasolidedgeid - Variable in class nxopen.features.CustomFeatureCreateFeatureGeometryEvent.CopyNXBodyData
-
The array of corresponding copied Parasolid edges
- parasolidfaceids - Variable in class nxopen.features.CustomFeatureCreateFeatureGeometryEvent.CopyNXBodyData
-
The array of corresponding copied Parasolid faces
- PARENT - Static variable in class nxopen.ame.EngineeringObjectAspectDetailBuilder.Columns
-
- parent() - Method in interface nxopen.ame.QueryBuilder
-
Returns the parent node of query node
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- parent() - Method in interface nxopen.assemblies.Component
-
Returns the parent of the component.
- parent() - Method in interface nxopen.cae.connections.Folder
-
Returns the parent folder
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- parent() - Method in interface nxopen.cae.IHierarchicalFEModel
-
Returns the parent fem of this object, can be null
License requirements: None.
- parent() - Method in interface nxopen.cae.SimLbcFolder
-
Returns the parent folder
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- parent() - Method in interface nxopen.drawings.DetailViewBuilder
-
Returns the parent view
License requirements: None.
- parent() - Method in interface nxopen.drawings.ProjectedViewBuilder
-
Returns the parent view
License requirements: None.
- parent() - Method in interface nxopen.ExpressionGroup
-
Returns an expression group's parent group or null
License requirements: None.
- parent() - Method in interface nxopen.features.shipdesign.ShipPreparationInfo
-
Returns the parent of the Ship Preparation feature.
- parent() - Method in interface nxopen.layout2d.LocalDefinitionFolderBuilder
-
Returns the current folder's parent
License requirements: nx_layout ("NX Layout")
.
- parent() - Method in interface nxopen.mechatronics.FunctionObjectBuilder
-
Returns the parent
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- parent() - Method in interface nxopen.mechatronics.LogicObjectBuilder
-
Returns the parent object.
- parent() - Method in interface nxopen.tooling.ElectrodeComponentBuilder
-
Returns the part which is the assembly parent to install an electrode chuck.
- parent() - Method in interface nxopen.tooling.SpecialFormingBuilder
-
Returns the parent
License requirements: None.
- parent - Variable in class nxopen.uf.UFSmd.PipNodeData
-
- parent - Variable in class nxopen.weld.WeldPointExitBuilder.FeatureInfo
-
the parent if method used was mirror or translate
- PARENT_FACES - Static variable in class nxopen.weld.TransformBuilder.ConnectedPartMethods
-
Use transformed parent faces to find connected parts
- PARENT_OBJECT - Static variable in class nxopen.preferences.SessionModeling.LinkedAndExtractedGeometryPropertiesInheritance
-
Indicates that display of linked and extracted geometry properties inherits from parent object
- PARENT_OF_FEM - Static variable in class nxopen.cae.ConvertToConvergentBodyBuilder.Option
-
The immediate parent of the current FEM Part
- PARENT_OF_SOLID_OWNING_PART - Static variable in class nxopen.tooling.SubInsertBuilder.Types
-
The parent part is the parent of solid owning part
- PARENT_VIEW_LABEL_BOUNDARY - Static variable in class nxopen.uf.UFDraw.LabelOnParentType
-
- PARENT_VIEW_LABEL_CIRCLE - Static variable in class nxopen.uf.UFDraw.LabelOnParentType
-
- PARENT_VIEW_LABEL_EMBEDDED - Static variable in class nxopen.uf.UFDraw.LabelOnParentType
-
- PARENT_VIEW_LABEL_LABEL - Static variable in class nxopen.uf.UFDraw.LabelOnParentType
-
- PARENT_VIEW_LABEL_NO_DISPLAY - Static variable in class nxopen.uf.UFDraw.LabelOnParentType
-
- PARENT_VIEW_LABEL_NOTE - Static variable in class nxopen.uf.UFDraw.LabelOnParentType
-
- PARENT_VIEW_LABEL_TRUE_BOUNDARY - Static variable in class nxopen.uf.UFDraw.LabelOnParentType
-
- parentArray - Variable in class nxopen.uf.UFModeling.AskFeatRelativesData
-
- parentAssociativity() - Method in interface nxopen.features.BlockFeatureBuilder
-
Returns the option to keep associativity of the Origin and Origin Offset Points
License requirements: None.
- parentAssociativity() - Method in interface nxopen.features.ConeBuilder
-
Returns the option to keep associativity of the cone axis
License requirements: None.
- parentAssociativity() - Method in interface nxopen.features.CylinderBuilder
-
Returns the option to keep associativity of the cylinder axis
License requirements: None.
- parentAssociativity() - Method in interface nxopen.features.SphereBuilder
-
Returns the option to keep associativity of the sphere center point
License requirements: None.
- parentAttnColor - Variable in class nxopen.uf.UFClear.Pref
-
- parentChannel() - Method in interface nxopen.tooling.ChannelFittingBuilder
-
Returns the parent channel of the cooling fitting points.
- parentCnt - Variable in class nxopen.uf.UFSf.AskNodePgeomsData
-
- parentCnt - Variable in class nxopen.uf.UFSf.LocateHptMgParentsData
-
- parentCondition() - Method in interface nxopen.visualreporting.Condition
-
Returns the parent condition of this
Condition
.
- parentCsys() - Method in interface nxopen.motion.SubmechanismPositionerBuilder
-
Returns the parent coordinate system.
- ParentDispInfo() - Constructor for class nxopen.uf.UFModl.ParentDispInfo
-
- ParentDispInfo(Tag, int, int, boolean) - Constructor for class nxopen.uf.UFModl.ParentDispInfo
-
- parentDisplay - Variable in class nxopen.uf.UFCam.Preferences
-
- parentDuct() - Method in interface nxopen.routing.DuctReinforcementBuilder
-
Returns the duct that is to be reinforced.
- parentDuct() - Method in interface nxopen.routing.WindCatcherBuilder
-
Returns the duct from which the Wind Catcher derives the wind direction.
- parentEntities - Variable in class nxopen.uf.UFModl.AskEntityParentsData
-
- parentEntity() - Method in interface nxopen.features.MatchedReferenceBuilder
-
Returns the matchedReference parent entity
License requirements: None.
- ParentEquivalencyMap - Interface in nxopen.geometricutilities
-
- ParentEquivalencyMap.Status - Class in nxopen.geometricutilities
-
enum for map status
- ParentEquivalencyMap.Type - Class in nxopen.geometricutilities
-
enum for map type
- ParentEquivalencyMapList - Interface in nxopen.geometricutilities
-
Represents a list of objects.
- ParentEvaluatorBuilder - Interface in nxopen.ame
-
- parentFeature() - Method in interface nxopen.features.SilhouetteFlangeBuilder
-
Returns the parent feature.
- parentFeatureInternal() - Method in interface nxopen.features.FeatureBuilder
-
Returns whether or not the latest timestamped parent feature of this feature
should be made internal
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- parentFunction() - Method in interface nxopen.mechatronics.RequirementBuilder
-
Returns the parent object.
- parentheses() - Method in interface nxopen.annotations.DraftingSurfaceFinishBuilder
-
Returns the parentheses
License requirements: None.
- parentheses() - Method in interface nxopen.annotations.SurfaceFinishBuilder
-
Returns the parentheses
License requirements: None.
- parentID() - Method in interface nxopen.mechatronics.GanttOperationBuilder
-
Returns the parent operation id in sequence editor tree
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- parentId() - Method in interface nxopen.mechatronics.GanttOperationConditionBuilder
-
Returns the parent id of condition
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- parentLabelPrefix() - Method in interface nxopen.drawings.ViewDetailLabelBuilder
-
Returns the parent label prefix
License requirements: None.
- parentLabelType - Variable in class nxopen.uf.UFDraw.ViewLabelParms
-
- ParentlibrarymaterialData() - Constructor for class nxopen.PhysicalMaterial.ParentlibrarymaterialData
-
- parentlibraryname - Variable in class nxopen.PhysicalMaterial.ParentlibrarymaterialData
-
- parentList - Variable in class nxopen.uf.UFSf.AskNodePgeomsData
-
- parentList - Variable in class nxopen.uf.UFSf.LocateHptMgParentsData
-
- parentMap - Variable in class nxopen.uf.UFModeling.ReplaceFeaturesData
-
- parentname - Variable in class nxopen.PhysicalMaterial.ParentlibrarymaterialData
-
- parentNames - Variable in class nxopen.uf.UFModeling.AskReferencesOfFeaturesData
-
- parentNode() - Method in interface nxopen.blockstyler.Node
-
Returns the parent node.
- parentNode() - Method in interface nxopen.tooling.BendInsertDesignBuilder
-
Returns the parent node.
- parentNode() - Method in interface nxopen.tooling.DieBaseBuilder
-
Returns the parent node.
- parentNode() - Method in interface nxopen.tooling.ShimBuilder
-
Returns the parent node which shim part will be insert to
License requirements: None.
- parentNode() - Method in interface nxopen.tooling.SmartScrewUpdateBuilder
-
Returns the parent node
License requirements: None.
- parentObject() - Method in interface nxopen.mechatronics.DependencyCreatorBuilder
-
Returns the parent object.
- parentOperation - Variable in class nxopen.uf.UFModl.BendOperationData
-
- parentOption() - Method in interface nxopen.features.CopyPasteBuilder
-
- parentOption - Variable in class nxopen.LoadOptions.InterpartData
-
- parentPart() - Method in interface nxopen.features.CompositeCurveBuilder
-
Returns the parent part
License requirements: None.
- parentPart() - Method in interface nxopen.features.ExtractFaceBuilder
-
Returns the source part type
License requirements: None.
- parentPart() - Method in interface nxopen.features.WaveDatumBuilder
-
Returns the source part type
License requirements: None.
- parentPart() - Method in interface nxopen.features.WavePointBuilder
-
Returns the source part type
License requirements: None.
- parentPart() - Method in interface nxopen.features.WaveSketchBuilder
-
Returns the source part type
License requirements: None.
- parentPart() - Method in interface nxopen.LinkedMirrorPartBuilder
-
Returns the source part which is being mirrored
License requirements: solid_modeling ("SOLIDS MODELING")
.
- parentPart() - Method in interface nxopen.tooling.BurringInsertBuilder
-
Returns the parent part to create blank.
- parentPart() - Method in interface nxopen.tooling.FormingInsertBuilder
-
Returns the parent part to create blank.
- parentPart() - Method in interface nxopen.tooling.GeneralInsertBuilder
-
Returns the parent part
License requirements: None.
- parentPart() - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder
-
Returns the parent part
License requirements: None.
- parentPartName() - Method in interface nxopen.tooling.BendInsertDesignBuilder
-
Returns the parent part name to create insert.
- parentPartName() - Method in interface nxopen.tooling.BurringInsertBuilder
-
Returns the parent part name to create blank.
- parentPartName() - Method in interface nxopen.tooling.DieBaseBuilder
-
Returns the parent part name.
- parentPartName() - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder
-
Returns the parent part name to create insert.
- parentPartName() - Method in interface nxopen.tooling.DieInsertBuilder
-
Returns the parent part name to create insert.
- parentPartName() - Method in interface nxopen.tooling.FormingInsertBuilder
-
Returns the parent part name to create blank.
- parentPartName() - Method in interface nxopen.tooling.GeneralInsertBuilder
-
Returns the parent part name of parent part
License requirements: None.
- parentPartName() - Method in interface nxopen.tooling.PiercingInsertBuilder
-
Returns the parent part name to create insert.
- parentPartName() - Method in interface nxopen.tooling.PunchInsertBuilder
-
Returns the parent part name to create insert.
- parentPartName() - Method in interface nxopen.tooling.ShimBuilder
-
Returns the parent part name of shim part
License requirements: None.
- parentPartName() - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder
-
Returns the parent part name to create insert.
- parentParts - Variable in class nxopen.uf.UFAssem.WhereIsPartUsedData
-
- parentPartType() - Method in interface nxopen.features.MirrorBodyBuilder
-
Returns the parent part type
License requirements: None.
- parentPlane() - Method in interface nxopen.features.sheetmetal.MultiBendBendPropertiesBuilder
-
Returns the plane
License requirements: None.
- parentPrompts - Variable in class nxopen.uf.UFAssem.DeformedDefinitionData
-
- parentRequirement() - Method in interface nxopen.validate.RequirementCheck
-
Returns the parent
Requirement
License requirements: None.
- parentRevisions - Variable in class nxopen.uf.UFUgmgr.PartrevWhereUsedData
-
- parentRevisionsCount - Variable in class nxopen.uf.UFUgmgr.PartrevWhereUsedData
-
- parents - Variable in class nxopen.uf.UFAssem.DeformedDefinitionData
-
- parents - Variable in class nxopen.uf.UFDraw.AskDraftingCurveParentsData
-
- parents - Variable in class nxopen.uf.UFModeling.AskReferencesOfFeaturesData
-
- parents - Variable in class nxopen.uf.UFModlGeneral.AskUdfDefinitionData
-
- parents - Variable in class nxopen.uf.UFSo.AskParentsData
-
- parentsCount - Variable in class nxopen.uf.UFDraw.AskDraftingCurveParentsData
-
- parentSmBody() - Method in interface nxopen.features.sheetmetal.MigratedPanelBuilder
-
Returns
the parent sheet metal body.
- parentsPrompt - Variable in class nxopen.uf.UFModlGeneral.AskUdfDefinitionData
-
- parentSuppressed - Variable in class nxopen.uf.UFAssem.AskPartOccSuppressStateData
-
- parentView() - Method in interface nxopen.drawings.SectionLineBuilder
-
- parentView() - Method in interface nxopen.drawings.SectionViewBuilder
-
Returns the selected parent view
License requirements: None.
- parentView() - Method in interface nxopen.drawings.SketchSectionLineBuilder
-
Returns the parent view
License requirements: None.
- ParentViewBuilder - Interface in nxopen.drawings
-
- parentViewTag - Variable in class nxopen.uf.UFDraw.AskPictorialSxlineData
-
- parentVwLblPrefix - Variable in class nxopen.uf.UFDraw.ViewLabelParms
-
- parm - Variable in class nxopen.uf.UFEval.EvaluateClosestPointData
-
- parm - Variable in class nxopen.uf.UFModeling.AskFaceParm2Data
-
- parm - Variable in class nxopen.uf.UFModeling.AskFaceParmData
-
- parm - Variable in class nxopen.uf.UFModlGeneral.AskCurveParmData
-
- PARM_CONSTANT - Static variable in class nxopen.uf.UFModl.ParmMethod
-
- PARM_LAW_NO_SPINE - Static variable in class nxopen.uf.UFModl.ParmMethod
-
- PARM_LAW_SPINE - Static variable in class nxopen.uf.UFModl.ParmMethod
-
- parseBomTemplate() - Method in interface nxopen.tooling.BomListBuilder
-
Parses the current BOM template.
- Parser - Interface in nxopen.validate
-
- Parser.DataSourceTypes - Class in nxopen.validate
-
The data source type of check result.
- parserLine - Variable in class nxopen.uf.UFStd.ImportStlAsciiFileData
-
- PART - Static variable in class nxopen.annotations.ImportAutocadBlockBuilder.Type
-
Part Symbol
- PART - Static variable in class nxopen.AttributeTemplatesBuilder.AccessKey
-
This attribute template will be accessible by parts
- PART - Static variable in class nxopen.AttributeTemplatesBuilder.TemplatesOptions
-
Templates currently residing in the part
- PART - Static variable in class nxopen.cae.CaeSetObjectSubType
-
sub type is part, used for Gravity Loads
- PART - Static variable in class nxopen.cam.GeometryGroup.PositionTypes
-
ipw position using part
- PART - Static variable in class nxopen.cam.HoleDrillingBuilder.IntersectionStrategyType
-
get intersection from part model
- PART - Static variable in class nxopen.cam.Preferences.GeometryTypes
-
part
- PART - Static variable in class nxopen.cam.SimulationOptionsBuilder.Stationary
-
use part stationary
- PART - Static variable in class nxopen.display.FacetSettingsBuilder.FacetScale
-
Adjusts tolerances by scale derived from bounding box of objects to facet in part
- part() - Method in interface nxopen.drafting.DrawingAutomationWizard
-
Returns the part from which the booklet drawings are created
License requirements: None.
- part() - Method in interface nxopen.drawings.DraftingComponentSelectionBuilder
-
Returns the part to use for populating the primary and secondary components object list
License requirements: None.
- part() - Method in interface nxopen.drawings.StandardViewsBuilder
-
Returns the part to use for base views
License requirements: None.
- part() - Method in interface nxopen.drawings.ViewCreationWizardBuilder
-
Returns the part
License requirements: drafting ("DRAFTING")
.
- part() - Method in interface nxopen.drawings.ViewStyleBaseBuilder
-
Returns the part on the BASE tab of the View Style Dialog
License requirements: None.
- PART - Static variable in class nxopen.DxfdwgImporter.ImportBlocksAs
-
Convert blocks as part
- PART - Static variable in class nxopen.features.shipdesign.CopyObjectsBuilder.Type
-
- PART - Static variable in class nxopen.features.shipdesign.ManufacturingStockBuilder.ObjectType
-
Part
- PART - Static variable in class nxopen.issue.IssueAttachment.Type
-
Part type
- Part - Interface in nxopen.mfg.am
-
Interface for Model Part objects
To obtain an instance of this class use JAX_MFG_AM_BUILDTRAY_GetAllParts
.
- Part - Interface in nxopen.mfg.mlp
-
Represents a Machining Line Planner part
To obtain an instance of this class use GetPartModel of Product or PartFeature.
- PART - Static variable in class nxopen.options.OptionsScope
-
Option scope is part
- Part - Interface in nxopen
-
Represents an NX part of type .prt.
- part - Variable in class nxopen.PartCollection.ImportToolDesignPackageData
-
Top level assembly
- part - Variable in class nxopen.PartCollection.OpenBaseData
-
- part - Variable in class nxopen.PartCollection.OpenData
-
- PART - Static variable in class nxopen.partfamily.FamilyAttribute.AttrType
-
part attribute
- PART - Static variable in class nxopen.preferences.RoutingPartLibrary.NodeType
-
Part node, contains information necessary
for loading/using a routing part.
- PART - Static variable in class nxopen.preferences.RoutingPartLibrary.RootType
-
Top node for selecting parts.
- PART - Static variable in class nxopen.routing.CompareRunsBuilder.CompareTypes
-
- PART - Static variable in class nxopen.routing.RouteManager.PartType
-
- PART - Static variable in class nxopen.routing.RouteManager.RootType
-
Top node for selecting parts.
- PART - Static variable in class nxopen.Session.ProjectAssignmentObjectType
-
item
- PART - Static variable in class nxopen.shapesearch.ShapeSearchBuilder.SearchByType
-
search by part
- PART - Static variable in class nxopen.shipdesign.ShipNavigatorNodeBuilder.NodeTypes
-
The part node type.
- PART - Static variable in class nxopen.sim.KinematicComponentBuilder.SystemClass
-
Part - Setup classification
- PART - Static variable in class nxopen.tooling.ObjectAttributeManagementBuilder.FilterAccordingToAttributeType
-
- PART - Static variable in class nxopen.tooling.ObjectAttributeManagementBuilder.FilterType
-
- PART - Static variable in class nxopen.tooling.PocketBuilder.ToolType
-
part
- part - Variable in class nxopen.uf.UFAssem.Prev16Align
-
- PART - Static variable in class nxopen.uf.UFCam.GeomType
-
- part - Variable in class nxopen.uf.UFModeling.AskAngleEdgeData
-
- part - Variable in class nxopen.uf.UFModeling.AskHorzDimeData
-
- part - Variable in class nxopen.uf.UFModeling.AskParaDistData
-
- part - Variable in class nxopen.uf.UFModeling.AskParaEdgeData
-
- part - Variable in class nxopen.uf.UFModeling.AskPerpDistData
-
- part - Variable in class nxopen.uf.UFModeling.AskVertDimeData
-
- part - Variable in class nxopen.uf.UFPart.CreateFamilyInstanceData
-
- part - Variable in class nxopen.uf.UFPart.OpenComponentAsData
-
- part - Variable in class nxopen.uf.UFPart.OpenData
-
- part - Variable in class nxopen.uf.UFPart.OpenQuietData
-
- part - Variable in class nxopen.uf.UFPart.OpenSingleComponentAsData
-
- part - Variable in class nxopen.uf.UFPart.UpdateFamilyInstanceData
-
- part() - Method in interface nxopen.UFSession
-
- PART - Static variable in class nxopen.validate.ResultObject.ResultTypes
-
Part
- PART - Static variable in class nxopen.visualreporting.VisualReport.ReportingObjectTypeOption
-
The reporting objects are parts.
- Part.FeatureUpdateStatus - Class in nxopen
-
Contains feature update status report
- Part.PartFamilyAttributeData - Class in nxopen
-
- Part.PartFamilyAttrType - Class in nxopen
-
- Part.Relations - Class in nxopen
-
The relations of the part file.
- Part.RemoveMissingParentsFromEdgeBlendData - Class in nxopen
-
- Part.Units - Class in nxopen
-
The units of the part file.
- Part.UpdateStatusReportData - Class in nxopen
-
- part1 - Variable in class nxopen.uf.UFModl.ComparePartMapData
-
- part1 - Variable in class nxopen.uf.UFModl.ComparePartMapData3
-
- part2 - Variable in class nxopen.uf.UFModl.ComparePartMapData
-
- part2 - Variable in class nxopen.uf.UFModl.ComparePartMapData3
-
- PART_ABS - Static variable in class nxopen.cam.InspectionAnalyzeOutputBuilder.ReportingCsysType
-
Part Absolute
- PART_AND_ASM - Static variable in class nxopen.JtCreator.PmiOption
-
PARTS_AND_ASM
- PART_ATTRIBUTE - Static variable in class nxopen.routing.RoutePartDescriptor.SourceType
-
- PART_ATTRIBUTE - Static variable in class nxopen.tooling.SpreadsheetData.KeywordType
-
Part attribute defined in spreadsheet
- PART_AXIS - Static variable in class nxopen.cam.ToolAxisAdvanced.RotateAboutType
-
Part Axis
- PART_BASED - Static variable in class nxopen.uf.UFGdt.IndexDisplayType
-
- PART_BODY - Static variable in class nxopen.tooling.CornerDesignBuilder.SelectFromOpt
-
part body only
- PART_CHECKOUT_CONVERT - Static variable in class nxopen.uf.UFClone.ConvertCb
-
- PART_COLORS - Static variable in class nxopen.CGMBuilder.Color
-
Part Colors
- PART_COLORS - Static variable in class nxopen.PlotColorsWidthsBuilder.Color
-
Part Colors
- PART_COLORS - Static variable in class nxopen.PrintPDFBuilder.Color
-
Part Colors
- PART_COLORS - Static variable in class nxopen.uf.UFCgm.Colors
-
- PART_COLORS - Static variable in class nxopen.uf.UFPlot.Colors
-
- PART_CONTAIN_ALL_LOOPS - Static variable in class nxopen.cam.DmBndBuilder.UsePartTypes
-
Part Containment All Loops
- PART_CONTAIN_LARGEST_LOOP - Static variable in class nxopen.cam.DmBndBuilder.UsePartTypes
-
Part Containment Largest Loop
- PART_CONTAIN_OFF - Static variable in class nxopen.cam.DmBndBuilder.UsePartTypes
-
Part Containment Off
- PART_CONVEX_HULL - Static variable in class nxopen.cam.GeometryGroup.BlankDefinitionTypes
-
blank defined through part convex hull
- PART_DEFAULT - Static variable in class nxopen.preferences.PartObject.LineFontType
-
Default Value from Part
- PART_DEFAULT - Static variable in class nxopen.preferences.PartObject.WidthType
-
Default Value from Part
- PART_DEFAULT - Static variable in class nxopen.preferences.SessionModeling.LinkedAndExtractedGeometryPropertiesInheritance
-
Indicates that display of linked and extracted geometry properties inherits from part default
- PART_DEFAULT - Static variable in class nxopen.preferences.SessionModeling.NewFacePropertiesInheritance
-
Indicates that display of new face properties inherits from part default
- PART_DESC_CONVERT - Static variable in class nxopen.uf.UFClone.ConvertCb
-
- PART_DESELECT - Static variable in class nxopen.assemblies.AssembliesEventTypes
-
deselect specified parts event
- PART_DESELECT_ALL - Static variable in class nxopen.assemblies.AssembliesEventTypes
-
deselect all parts event
- PART_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- PART_EXPORT_FAILED - Static variable in class nxopen.gateway.CopyCutBuilder.Status
-
Error while exporting part with copied/cut objects
- PART_FAMILY_MEMBER_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
-
Part family member
- PART_FULLY_LOAD - Static variable in class nxopen.assemblies.AssembliesEventTypes
-
part fully load event
- PART_GEOM_COLOR - Static variable in class nxopen.uf.UFCamPref.CamPref
-
- PART_GEOM_TYPE - Static variable in class nxopen.uf.UFCamPref.CamPref
-
- PART_ID - Static variable in class nxopen.annotations.PmiPreferences.PreferenceSymbolTypes
-
part id
- PART_IDENTIFIER - Static variable in class nxopen.annotations.PmiFilterByType.Type
-
Indicates a PMI part identifier type
- PART_IDENTIFIER_TYPE - Static variable in class nxopen.uf.UFPd.AttributeType
-
- PART_IDGENERATOR - Static variable in class nxopen.pdm.PartOperationImportBuilder.NumberingSourceOption
-
- PART_LETTERING - Static variable in class nxopen.annotations.TextPreferencesOption
-
Specifies current part files's lettering preferences will be used
- PART_LIST_BOM - Static variable in class nxopen.ame.DocumentType
-
- PART_LIST_BOM - Static variable in class nxopen.ame.PageBuilder.Types
-
- PART_MAKE_DISPLAYED - Static variable in class nxopen.assemblies.AssembliesEventTypes
-
part make displayed part event
- PART_MAKE_WORK - Static variable in class nxopen.assemblies.AssembliesEventTypes
-
part make work part event
- PART_NAME - Static variable in class nxopen.annotations.PartsListBuilder.PartsListMainSymbolText
-
- PART_NAME - Static variable in class nxopen.annotations.PartsListBuilder.PartsListReferenceSymbolText
-
- PART_NAME_CONVERT - Static variable in class nxopen.uf.UFClone.ConvertCb
-
- PART_NAME_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
-
Part name
- PART_NEW_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- PART_NOT_CONNECTED_TO_ROUT - Static variable in class nxopen.mechanicalrouting.PartPlacementBuilder.PlacementValidationStatus
-
after placement connection should have been built with routing system but it was not
- PART_OFF - Static variable in class nxopen.cam.CutStrategy.Types
-
Cut strategy: Part Off
- PART_ONLY - Static variable in class nxopen.JtCreator.PmiOption
-
PARTS_ONLY
- PART_OPEN_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- PART_OUTLINE - Static variable in class nxopen.cam.CutParametersExtendFloorTypes
-
Part Outline
- PART_OUTLINE - Static variable in class nxopen.cam.GeometryGroup.BlankDefinitionTypes
-
blank defined through part outline
- PART_OWN_GROUP_CONVERT - Static variable in class nxopen.uf.UFClone.ConvertCb
-
- PART_OWN_USER_CONVERT - Static variable in class nxopen.uf.UFClone.ConvertCb
-
- PART_PREFERENCES - Static variable in class nxopen.annotations.PmiResizeMethod
-
Resize using part settings
- PART_SAVEAS_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- PART_SAVEAS_STUDENT_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- PART_SAVEAS_WITH_CATPRODUCT_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- PART_SAVEAS_WITH_PROTECTION - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- PART_SELECT - Static variable in class nxopen.assemblies.AssembliesEventTypes
-
select specified parts event
- PART_SELECT_ALL - Static variable in class nxopen.assemblies.AssembliesEventTypes
-
select all parts event
- PART_SURFACE - Static variable in class nxopen.cam.CornerControlBuilder.SmoothCornersAtOptions
-
Part Surface
- PART_SYMBOL - Static variable in class nxopen.annotations.SymbolPreferencesOption
-
Specifies part's symbol preferences will be used
- PART_TO_BLANK - Static variable in class nxopen.tooling.IntermediateStageBuilder.DesignSequences
-
design sequence from part to blank
- PART_TYPE - Static variable in class nxopen.Part.PartFamilyAttrType
-
Deprecated.
part attribute
- PART_TYPE_CONVERT - Static variable in class nxopen.uf.UFClone.ConvertCb
-
- PART_UNITS - Static variable in class nxopen.cam.InspectionCmmCommandBuilder.LinearUnitsOptions
-
Use part units
- PART_UNITS - Static variable in class nxopen.cam.ParamValueIntent
-
value used as is
- PART_UNITS_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
-
Part units
- PartAeroSheetmetal - Interface in nxopen.preferences
-
Represents the NX Sheetmetal preferences applicable to part
Preferences are in control of the part.
- partAeroSheetmetal() - Method in interface nxopen.preferences.PartPreferences
-
Returns object to modify the Preference settings for Aerospace Sheetmetal application .
- PartAttributeData() - Constructor for class nxopen.annotations.AssociativeText.PartAttributeData
-
- partAxisBuilder() - Method in interface nxopen.cam.DmRotaryFloorFinishBuilder
-
Returns the part axis builder
License requirements: None.
- partAxisBuilder() - Method in interface nxopen.cam.MultiBladeGeomBuilder
-
Returns the part axis builder
License requirements: None.
- PartAxisBuilder - Interface in nxopen.cam
-
Represents a part axis builder.
- partAxisBuilder() - Method in interface nxopen.cam.RotaryFinishGeomBuilder
-
Returns the part axis builder
License requirements: None.
- PartAxisBuilder.PartAxisOfRotationTypes - Class in nxopen.cam
-
The types for part axis of rotation
- partAxisPoint() - Method in interface nxopen.cam.MultiBladeGeomBuilder
-
Returns the part axis point
License requirements: None.
- partAxisPoint() - Method in interface nxopen.cam.PartAxisBuilder
-
Returns the part axis point
License requirements: None.
- partAxisPoint() - Method in interface nxopen.cam.RotaryFinishGeomBuilder
-
Returns the part axis point
License requirements: None.
- partAxisVector() - Method in interface nxopen.cam.MultiBladeGeomBuilder
-
Returns the part axis vector
License requirements: None.
- partAxisVector() - Method in interface nxopen.cam.PartAxisBuilder
-
Returns the part axis vector
License requirements: None.
- partAxisVector() - Method in interface nxopen.cam.RotaryFinishGeomBuilder
-
Returns the part axis vector
License requirements: None.
- partBoundary() - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
Returns the boundary which is a group of edges user chooses to apply on equivalent force.
- partBoundary() - Method in interface nxopen.cam.MillBoundaryGeomBuilder
-
Returns the part boundary
License requirements: None.
- partBoundary() - Method in interface nxopen.cam.PlanarMillingBuilder
-
Returns the part boundary
License requirements: None.
- partBoundary() - Method in interface nxopen.cam.TurnBoundaryGeomBuilder
-
Returns the part boundary
License requirements: None.
- PartBuilder - Interface in nxopen.pdm
-
This class serves as the base class for NX Manager part builders.
- PartBuilder.Operation - Class in nxopen.pdm
-
Tokens identifying every possible UG/Manager part selection dialog.
- PartBuilder.PartFileNameData - Class in nxopen.pdm
-
Contains part file name information
- PartBuilder.PartNumberData - Class in nxopen.pdm
-
Contains part number information.
- PartBuilder.PartRevisionData - Class in nxopen.pdm
-
Contains part revision information
- partCategory() - Method in interface nxopen.features.shipdesign.StandardPartFrameworkBuilder
-
Returns the part category, which is defined in registration file.
- PartCleanup - Interface in nxopen
-
Provides utilities to to eliminate certain inaccessible
objects from the part file.
- PartCleanup.CleanupParts - Class in nxopen
-
Which parts to clean up
- PartCleanup.DeleteGroups - Class in nxopen
-
Which empty groups to clean up
- PartCleanup.ResetComponentDisplayAction - Class in nxopen
-
Assembly display clean up action
- partClosedHandler(BasePart) - Method in interface nxopen.PartCollection.PartClosedHandler
-
User defined method that is called whenever a part is in the process of being closed.
- PartCloseResponses - Interface in nxopen
-
Manages a list of part name/response pairs which are
used to determine whether a part should be closed if modified during
part close.
- PartCloseStatus - Interface in nxopen
-
This class represents a list of part names with associated status codes that serve
to communicate why these parts were not able to be closed.
- PartCollection - Interface in nxopen
-
Represents the collection of all parts in a session.
- PartCollection.ImportToolDesignPackageData - Class in nxopen
-
- PartCollection.MirrorPlaneDataOfMirrorPartData - Class in nxopen
-
- PartCollection.MultipleDisplayedPartStatus - Class in nxopen
-
Represents the status if Multiple Display Parts are allowed or not.
- PartCollection.OpenBaseData - Class in nxopen
-
- PartCollection.OpenData - Class in nxopen
-
- PartCollection.PartClosedHandler - Interface in nxopen
-
User defined method that is called whenever a part is in the process of being closed.
- PartCollection.PartCreatedHandler - Interface in nxopen
-
User defined method that is called whenever a new part is created.
- PartCollection.PartModifiedHandler - Interface in nxopen
-
User defined method that is called whenever a part is modified
- PartCollection.PartOpenedHandler - Interface in nxopen
-
User defined method that is called whenever a part is opened.
- PartCollection.PartRenamedHandler - Interface in nxopen
-
User defined method that is called whenever a part is renamed
- PartCollection.PartSavedAsHandler - Interface in nxopen
-
User defined method that is called whenever a part is saved as a specified name.
- PartCollection.PartSavedHandler - Interface in nxopen
-
User defined method that is called whenever a part is saved.Do not create, open, save
other parts or change active display part inside this callback.
- PartCollection.RefsetOption - Class in nxopen
-
Controls the reference set used when setting the work component.
- PartCollection.SaveAllData - Class in nxopen
-
- PartCollection.SdpsStatus - Class in nxopen
-
Indicates the reason why it was not possible to use Design in Context (i.e. to set
the work part to a component of the new active displayed part.)
- PartCollection.SetDisplayData - Class in nxopen
-
- PartCollection.SetProtectionOn - Class in nxopen
-
Specifies the parts to which the password protection operation will apply.
- PartCollection.WorkComponentOption - Class in nxopen
-
Controls the behavior when setting the work component.
- PartCollection.WorkPartChangedHandler - Interface in nxopen
-
User defined method that is called whenever the work part has changed.
- partColor() - Method in interface nxopen.cam.Preferences
-
Returns the part color
License requirements: None.
- partCreatedHandler(BasePart) - Method in interface nxopen.PartCollection.PartCreatedHandler
-
User defined method that is called whenever a new part is created.
- partCreation() - Method in interface nxopen.PreviewPropertiesBuilder
-
Returns the part creation.
- PartCreationObject - Interface in nxopen.pdm
-
This class is a proxy for a to-be-created part prior to the part being created.
- PartCreationObjectAttributePropertiesBuilder - Interface in nxopen.pdm
-
- partCreationType() - Method in interface nxopen.features.shipdesign.StandardPartFrameworkBuilder
-
Returns the creation type.
- PartDefinitionBase - Interface in nxopen.routing
-
- PartDefinitionShadow - Interface in nxopen.routing
-
- PartDelayedUpdateStatus - Interface in nxopen
-
Represents a list of part names with associated delay status codes.
- PartDelayedUpdateStatus.DelayStatusInfo - Class in nxopen
-
Logical structure of part delayed update status
- partDesc - Variable in class nxopen.uf.UFUgmgr.AskPartNameDescData
-
- partDescription - Variable in class nxopen.pdm.PartBuilder.PartNumberData
-
The part description
- partDescriptionModifiable - Variable in class nxopen.pdm.PartBuilder.PartNumberData
-
Modifiable flag for part description.
- partDirectory() - Method in interface nxopen.tooling.RenameAndExportComponentBuilder
-
Returns the part directory
License requirements: None.
- PartDisplayPartWorkPartOption - Class in nxopen
-
Controls what the work part will be when setting active display part.
- PartDrafting - Interface in nxopen.preferences
-
Represents the set of drafting preferences applicable to part
To obtain an instance of this class, refer to
PartPreferences
Created in NX3.0.0
- PartDrafting.BreakLineStyle - Class in nxopen.preferences
-
Describes the available break line style
- PartDrafting.FontType - Class in nxopen.preferences
-
Describes the available font types
- PartDrafting.UpdateViewWithoutLwDataOption - Class in nxopen.preferences
-
Describes the update view without light weight data options
- PartDrafting.ViewStyleType - Class in nxopen.preferences
-
Describes the available view style types for preview
- PartDrafting.WidthType - Class in nxopen.preferences
-
Describes the available width types
- partEdge - Variable in class nxopen.die.Tip.MapEdgeData
-
- PARTFAMILY - Static variable in class nxopen.SpreadsheetManager.Sheettype
-
specifies Partfamily sheet type
- PartFamilyAttributeData() - Constructor for class nxopen.Part.PartFamilyAttributeData
-
Deprecated.
- PartFamilyAttributeData(Part.PartFamilyAttrType, String) - Constructor for class nxopen.Part.PartFamilyAttributeData
-
Deprecated.
Constructor for the PartFamilyAttributeData object.
- PartFamilyManager - Interface in nxopen
-
- PartFamilyMemberData - Interface in nxopen
-
- PartFamilyMemberValues - Interface in nxopen
-
- PartFeature - Interface in nxopen.mfg.mlp
-
Represents a Machining Line Planner part-feature
To obtain an instance of this class use GetPartFeature of MachiningFeature or GetPartFeatures or Part.
- partFile() - Method in interface nxopen.linedesigner.ReuseLibraryDragData
-
Returns the part file name is return
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- partFile() - Method in interface nxopen.tooling.ReusableObject
-
Returns the part file which owns this reusable object
License requirements: None.
- PartFileInfo() - Constructor for class nxopen.uf.UFUgmgr.PartFileInfo
-
- PartFileInfo(String, String, String, String, String, String, UFUgmgr.RevConfigOptions) - Constructor for class nxopen.uf.UFUgmgr.PartFileInfo
-
- partFileName() - Method in interface nxopen.annotations.MasterSymbolBuilder
-
Returns the part file name
License requirements: None.
- partFileName() - Method in interface nxopen.annotations.SymbolCatalogBuilder
-
Returns the part file name
License requirements: None.
- partFileName - Variable in class nxopen.pdm.PartBuilder.PartFileNameData
-
Part file name
- partFileName - Variable in class nxopen.uf.UFUgmgr.DecodePartFileNameData
-
- PartFileNameData() - Constructor for class nxopen.pdm.PartBuilder.PartFileNameData
-
- PartFileNameData(String, boolean) - Constructor for class nxopen.pdm.PartBuilder.PartFileNameData
-
Constructor for the PartFileNameData object.
- partFileNameModifiable - Variable in class nxopen.pdm.PartBuilder.PartFileNameData
-
False if part file name is not modifiable
- PartFileObject() - Constructor for class nxopen.uf.UFUgmgr.PartFileObject
-
- PartFileObject(String, String, String, String, String, String, String, String, Tag, int) - Constructor for class nxopen.uf.UFUgmgr.PartFileObject
-
- partFileType - Variable in class nxopen.uf.UFUgmgr.DecodePartFileNameData
-
- PartFlexiblePrintedCircuitDesign - Interface in nxopen.preferences
-
Represents the Flexible Printed Circuit Design preferences applicable to part
Preferences are in control of the part.
- partFlexiblePrintedCircuitDesign() - Method in interface nxopen.preferences.PartPreferences
-
Returns object to modify the Preference settings for Flexible Printed Circuit Design application .
- PartFlexiblePrintedCircuitDesign.FlatPatternCalloutOrientationType - Class in nxopen.preferences
-
This enum represents orientation types for the flat pattern callouts
- PartFlexiblePrintedCircuitDesign.FlatPatternCalloutTypeDisplay - Class in nxopen.preferences
-
The members of the following structure are the display data for a
callout in a flat pattern drawing member view.
- PartFlexiblePrintedCircuitDesign.FlatPatternObjectType - Class in nxopen.preferences
-
The members of the following enumerated type are used to identify
object types to the FlatPattern API.
- PartFlexiblePrintedCircuitDesign.FlatPatternObjectTypeDisplay - Class in nxopen.preferences
-
The members of the following structure are the display data for an
object in a flat pattern drawing member view.
- PartFlexiblePrintedCircuitDesign.FlexibleCableContactFaceOptions - Class in nxopen.preferences
-
This enum represents the face that is the contact face
of the Flexible Cable.
- PartFlexiblePrintedCircuitDesign.MaterialPropertiesData - Class in nxopen.preferences
-
- PartFlexiblePrintedCircuitDesign.PlanarSegmentCurveType - Class in nxopen.preferences
-
The following members are used to identify curve types of planar segment feature.
- PartFlexiblePrintedCircuitDesign.PlanarSegmentCurveTypeDisplayData - Class in nxopen.preferences
-
The members of the following structure are the display data.
- partFolderBrowser() - Method in interface nxopen.tooling.MoldFeatureRecognitionBuilder
-
Returns the folder of part file to be saved
License requirements: None.
- partFolderBrowser() - Method in interface nxopen.tooling.SheetMetalFeatureRecognitionBuilder
-
Returns the folder of part file to be saved
License requirements: None.
- partForKF() - Method in interface nxopen.drawings.DraftingComponentSelectionBuilder
-
Returns the part to use for populating the primary and secondary components object list
License requirements: None.
- PartFromPartBuilder - Interface in nxopen.pdm
-
This class provides the methods necessary to create a new part in NX Manager
from an existing part.
- PartFromPartBuilder.FileSaveAs - Class in nxopen.pdm
-
This enum is used to specify which non-master parts and dependent files
should be saved during the save as operation.
- PartFromTemplateBuilder - Interface in nxopen.pdm
-
This class provides the methods necessary to create a new part in NX Manager
from a template part.
- partGeomColor - Variable in class nxopen.uf.UFCam.Preferences
-
- partGeometry() - Method in interface nxopen.cam.MillGeomBuilder
-
Returns the part geometry builder
License requirements: None.
- partGeometry() - Method in interface nxopen.cam.PlanarOperationBuilder
-
Returns the part geometry builder
License requirements: None.
- partGeometry() - Method in interface nxopen.cam.SurfaceContourBuilder
-
Returns the part geometry builder
License requirements: None.
- partGeometryCopy() - Method in interface nxopen.assemblies.productinterface.ObjectBuilder
-
Returns the part geometry copy
License requirements: None.
- PartGeometryCopyBuilder - Interface in nxopen.features
-
- PartGeometryCopyBuilder.Type - Class in nxopen.features
-
Specifies object types to copy in the part geometry copy block
- PartGeometryCopySelectBuilder - Interface in nxopen.features
-
- PartGeometryCopySelectBuilderList - Interface in nxopen.features
-
Represents a list of objects.
- partGeomType - Variable in class nxopen.uf.UFCam.Preferences
-
- PARTIAL - Static variable in class nxopen.assemblies.Component.RepresentationMode
-
The component's solid bodies are displayed with some being exact and some being shown lightweight
- PARTIAL - Static variable in class nxopen.cam.InspectionMethodBuilder.PolarAngleModeTypes
-
Start point and end point
- PARTIAL - Static variable in class nxopen.LoadOptions.Parent
-
Do not load any unloaded parents,
but fully load partially loaded parts with parent geometry.
- PARTIAL - Static variable in class nxopen.preferences.ReferenceSetBehavior
-
Inherit only PMI for which all of the referenced objects are in the active reference set.
- PARTIAL - Static variable in class nxopen.routing.electrical.ElectricalStockDevice.RouteLevel
-
- PARTIAL - Static variable in class nxopen.Session.ProjectAssignmentState
-
to skip project assignment
- PARTIAL - Static variable in class nxopen.tooling.BomListDataProvider.ExportedStatus
-
Partial parts in the row are exported
- PARTIAL_AUTO_ROUTE - Static variable in class nxopen.routing.CustomManager.DesignRuleReason
-
Called after the Partial AutoRoute command.
- PARTIAL_AUTO_ROUTE_COMP - Static variable in class nxopen.routing.DesignRuleViolationCollection.Reason
-
- PARTIAL_FACE - Static variable in class nxopen.routing.FittingOverstockBuilder.Types
-
Partial Face
- PARTIAL_MANUAL_ROUTE - Static variable in class nxopen.routing.CustomManager.DesignRuleReason
-
Called after the Partial Manual Route command.
- PARTIAL_SUCCESS - Static variable in class nxopen.features.SketchConversionStatus.Type
-
Convert to sketch succeeded with reason/issues
- partialHoleAngle() - Method in interface nxopen.annotations.HoleTableSettingsHoleFiltersBuilder
-
Returns the partial hole angle
License requirements: None.
- PARTIALLY_CONTROLLED - Static variable in class nxopen.annotations.MasterSymbolListItemBuilder.TextTypes
-
- PARTIALLY_CONTROLLED - Static variable in class nxopen.annotations.TextType
-
Specifies the text defined in the master symbol as enumerated
set of values, one of which can be selected or overwritten in the
custom symbol.
- PARTIALLY_CONTROLLED_TEXT - Static variable in class nxopen.uf.UFDrf.CustomSymbolTextType
-
- PARTIALLY_LOAD - Static variable in class nxopen.LoadOptions.LoadOption
-
partial load : on, use lightweight : off
- PARTIALLY_LOAD_LIGHTWEIGHT_DISPLAY - Static variable in class nxopen.LoadOptions.LoadOption
-
partial load : on, use lightweight : on
- PARTIALLY_SHADED - Static variable in class nxopen.preferences.ShadingRenderingStyleOption
-
Partially Shaded
- PARTIALLY_SHADED - Static variable in class nxopen.preferences.ViewVisualizationVisual.DisplayModeType
-
Deprecated.
Shade only selected object
- PARTIALLY_SHADED - Static variable in class nxopen.preferences.ViewVisualizationVisual.RenderingStyle
-
- PARTIALLY_SHADED - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.ViewMode
-
The view is partially shaded
- PARTIALLY_SHADED - Static variable in class nxopen.View.RenderingStyleType
-
- PARTIALLY_SHADED_STYLE - Static variable in class nxopen.uf.UFView.RenderingStyle
-
- partiallyCommit() - Method in interface nxopen.assemblies.CopyDesignElementBuilder
-
Copy design elements with minimal required information.Call to builder Commit is required after this to Commit creation.
- partiallyCommit(LogicalObject[]) - Method in interface nxopen.assemblies.DesignElementBuilder
-
Equivalent to builder Commit call but this one would create design elements with minimal required
information.
- partiallyControlledNoteTitle() - Method in interface nxopen.annotations.BaseCustomSymbolBuilder
-
Returns the partially controlled note title
License requirements: None.
- partiallyDefinedColor() - Method in interface nxopen.preferences.PartSketch
-
Returns the sketch partially defined constraint color
License requirements: None.
- partiallyShaded() - Method in interface nxopen.DisplayModification
-
Returns the partial shading flag.
- partiallyShaded() - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
Returns the partially shaded
License requirements: None.
- partiallyShaded() - Method in interface nxopen.preferences.PartObject
-
Returns the partially shaded flag for Solid and Sheets
License requirements: None.
- partialMatch() - Method in interface nxopen.features.MatchEdgeBuilder
-
Returns the partial match
License requirements: None.
- partialOption() - Method in interface nxopen.features.OffsetSurfaceBuilder
-
Returns the option to pursue a partial offset result
License requirements: None.
- partialRibbingParent() - Method in interface nxopen.die.DrawDiePunchBuilder
-
Returns the partial ribbing parent builder of the draw die punch.
- partialRibHeight() - Method in interface nxopen.die.DrawDiePunchSectionBuilder
-
Returns the partial rib height of the draw die punch casting.
- partialSphereAngle() - Method in interface nxopen.motion.AnalyticalContactBuilder
-
Returns the partial sphere angle
License requirements: mechanisms ("MECHANISMS")
.
- partialSphereAngle() - Method in interface nxopen.motion.BodyContactSphereToCAD
-
Returns the partial sphere angle
License requirements: None.
- partialSphereOption() - Method in interface nxopen.motion.AnalyticalContactBuilder
-
Returns the partial sphere option
License requirements: mechanisms ("MECHANISMS")
.
- partialSphereOption() - Method in interface nxopen.motion.BodyContactSphereToCAD
-
Returns the partial sphere option
License requirements: None.
- partialSphereVector() - Method in interface nxopen.motion.AnalyticalContactBuilder
-
Returns the partial sphere vector
License requirements: mechanisms ("MECHANISMS")
.
- partialSphereVector() - Method in interface nxopen.motion.BodyContactSphereToCAD
-
Returns the partial sphere vector
License requirements: None.
- participatingDatumColor() - Method in interface nxopen.preferences.PartSketch
-
Returns the sketch participating datum curve color
License requirements: None.
- PARTICLE_DENSITY - Static variable in class nxopen.cae.Result.Quantity
-
- PARTICLE_MASS_DENSITY - Static variable in class nxopen.cae.Result.Quantity
-
- partId() - Method in interface nxopen.cae.PostMesh
-
Returns the part id of the post mesh
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- partid - Variable in class nxopen.uf.UFUgmgr.PartFileInfo
-
- partid - Variable in class nxopen.uf.UFUgmgr.PartFileObject
-
- PartIdentification - Interface in nxopen.annotations
-
Represents a Part Identification
To create or edit an instance of this class, use
PartIdentificationBuilder
Created in NX6.0.0
- PartIdentificationBuilder - Interface in nxopen.annotations
-
- partIdentifier() - Method in interface nxopen.annotations.PartIdentificationBuilder
-
Returns the part identifier
License requirements: None.
- PartImporter - Interface in nxopen
-
Used to import a part into the work part.
- PartImporter.DestinationCoordinateSystemSpecificationType - Class in nxopen
-
Specifies the destination coordinate system specification.
- PartImporter.LayerOptionType - Class in nxopen
-
Specifies on which layer to import a part.
- PARTING_EDGE - Static variable in class nxopen.features.DraftBuilder.Type
-
Draft with Parting Edges type
- PARTING_FACE - Static variable in class nxopen.features.DraftBuilder.DraftReferencesMethods
-
Draft from stationary parting face.
- PARTING_LINE - Static variable in class nxopen.tooling.MWDesignPartingSurfaceBuilder.ObjectType
-
Parting line
- PARTING_SURFACE - Static variable in class nxopen.tooling.AssignPatchBuilder.Types
-
- PARTING_SURFACE - Static variable in class nxopen.tooling.MWDesignPartingSurfaceBuilder.ObjectType
-
Parting surface
- PARTING_SURFACES - Static variable in class nxopen.tooling.MWCopySheetsBuilder.Types
-
Sheet type - parting sheets
- partingColor() - Method in interface nxopen.tooling.AssignPatchBuilder
-
Returns the parting surface color
License requirements: None.
- partingLines() - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder
-
Returns the parting lines for creating parting surface.
- partingObject() - Method in interface nxopen.facet.RemoveUndercutsBuilder
-
Returns the parting object
License requirements: None.
- partingObject() - Method in interface nxopen.features.DraftBodyBuilder
-
Returns the parting object
License requirements: None.
- partingReference() - Method in interface nxopen.features.DraftBuilder
-
Returns the parting reference as SC Collector containing only faces or only one datum plane or only one point.
- partIsDescendant(Tag, Tag) - Method in interface nxopen.uf.UFAssem
-
- PARTITION - Static variable in class nxopen.assemblies.FindInCollaborativeDesign.ObjectType
-
Search for partitions
- Partition - Interface in nxopen.assemblies
-
A partition is a Teamcenter object in a Collaborative Design.
- partition() - Method in interface nxopen.assemblies.PartitionSearchTerm
-
Returns the partition of this search term.
- PARTITION - Static variable in class nxopen.linedesigner.CreateFactoryElementBuilder.TypeAPI
-
Represents the Partition type
- PARTITION - Static variable in class nxopen.linedesigner.DBFactoryNode.NodeType
-
- PARTITION_MEMBERSHIP_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
-
Partition Membership property
- partitionBody(int, Tag[], Tag) - Method in interface nxopen.uf.UFSf
-
- PartitionBodyData() - Constructor for class nxopen.uf.UFSf.PartitionBodyData
-
- partitionBodyNx5(int, int, Tag[], Tag) - Method in interface nxopen.uf.UFSf
-
- PartitionBodyNx5Data() - Constructor for class nxopen.uf.UFSf.PartitionBodyNx5Data
-
- partitionedBodies - Variable in class nxopen.uf.UFSf.PartitionBodyData
-
- partitionedBodies - Variable in class nxopen.uf.UFSf.PartitionBodyNx5Data
-
- PartitionList - Interface in nxopen.assemblies
-
Represents a list of objects.
- PARTITIONS - Static variable in class nxopen.assemblies.DesignElementBuilder.EditActionType
-
- PartitionScheme - Interface in nxopen.assemblies
-
A partition scheme is a Teamcenter object in a Collaborative Design.
- PartitionSearchTerm - Interface in nxopen.assemblies
-
- PartitionSearchTerm.IncludeChildren - Class in nxopen.assemblies
-
Logic used to determine whether children are to be included for the search term which is used within a recipe.
- partitionViewStyle() - Method in interface nxopen.assemblies.Subset
-
Returns
the partition view style to show.
- partLibrary() - Method in interface nxopen.preferences.RoutingPart
-
The Routing part library.
- partLibraryGetChildNodes(String) - Method in interface nxopen.routing.ReuseLibrary
-
Given an identifier, this routine returns it's child identifiers.
- PartLibraryGetChildNodesData() - Constructor for class nxopen.routing.ReuseLibrary.PartLibraryGetChildNodesData
-
- partLibraryGetDisciplineRoots() - Method in interface nxopen.routing.ReuseLibrary
-
Returns the identifiers which represent the start nodes for the current discipline.
- PartLibraryGetDisciplineRootsData() - Constructor for class nxopen.routing.ReuseLibrary.PartLibraryGetDisciplineRootsData
-
- partLibraryGetPartsAtNode(String) - Method in interface nxopen.routing.ReuseLibrary
-
Given a node identifier, this routine will return all parts associated with that node.
- partList - Variable in class nxopen.uf.UFPart.SaveAllData
-
- partList - Variable in class nxopen.uf.UFPart.UpdateFamilyInstanceData
-
- partListCompare() - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
- partLoadOption() - Method in interface nxopen.LoadOptions
-
Returns the option that controls how the part is being loaded
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- partLoadOption - Variable in class nxopen.uf.UFAssem.LoadOptions
-
- PartLoadStatus - Interface in nxopen
-
Represents a list of part names with associated status codes.
- PartManager - Interface in nxopen.pdm
-
This class contains methods to create and manage parts in NX Manager mode.
- partMaterial() - Method in interface nxopen.tooling.DefineNeutralFactorBuilder
-
Returns the part material
License requirements: None.
- partMaterialBuilder() - Method in interface nxopen.cam.FeatureGeomBuilder
-
- PartMaterialData() - Constructor for class nxopen.cam.CAMSetup.PartMaterialData
-
- partMatStr() - Method in interface nxopen.tooling.InitProjBuilder
-
Returns the material type of sheet metal part
License requirements: None.
- PartModeling - Interface in nxopen.preferences
-
Represents the set of Modeling preferences applicable to part
To obtain an instance of this class, refer to
PartPreferences
Created in NX3.0.0
- PartModeling.CurveCurvatureDisplayType - Class in nxopen.preferences
-
Describes whether the curve curvature display is Curvature Comb or radius of Curvature Comb
- PartModeling.DensityUnitType - Class in nxopen.preferences
-
Describes the units available for representing density
- PartModeling.GridKnotLineFontType - Class in nxopen.preferences
-
the available font for grid/knot line
- PartModeling.GridResolutionType - Class in nxopen.preferences
-
Describes all available grid resolutions for selection
- partModifiedHandler(BasePart) - Method in interface nxopen.PartCollection.PartModifiedHandler
-
User defined method that is called whenever a part is modified
License requirements: None.
- PartModule - Interface in nxopen.features
-
Represents a part module
To create or edit an instance of this class, use
PartModuleBuilder
Created in NX8.0.0
- partModule() - Method in interface nxopen.geometricutilities.PartModuleRelationshipBuilder
-
Returns the part module in owining part to establish the relationship
License requirements: None.
- PartModule.PartLoadOption - Class in nxopen.features
-
Defines part load options
- PartModuleBuilder - Interface in nxopen.features
-
- PartModuleInputBuilder - Interface in nxopen.geometricutilities
-
- PartModuleInputBuilder.ModifiableGeometryOptions - Class in nxopen.geometricutilities
-
the Modifiable Geometry option types
- PartModuleOutputBuilder - Interface in nxopen.geometricutilities
-
- PartModuleOutputBuilder1 - Interface in nxopen.geometricutilities
-
- PartModuleReferencesBuilder - Interface in nxopen.geometricutilities
-
- PartModuleRelationshipBuilder - Interface in nxopen.geometricutilities
-
- partMountJunction() - Method in interface nxopen.cam.NcmctPartMountingBuilder
-
Returns the CSYS associated with the junction
License requirements: None.
- partName() - Method in interface nxopen.annotations.MasterCustomSymbolData
-
- partName() - Method in interface nxopen.drawings.ViewStyleBaseBuilder
-
Returns the part name on the BASE tab of the View Style Dialog
License requirements: None.
- partName - Variable in class nxopen.Expression.InterpartExpressionNamesData
-
- partName() - Method in interface nxopen.layout2d.ComponentNameBuilder
-
Returns the JA method support for accessing and setting Component part file mame value,
NOTE: Client must free the returned TEXT_p_t* with TEXT_free
License requirements: None.
- partName() - Method in interface nxopen.mechatronics.ComparisonResultContext
-
Returns the part name from the comparison context
License requirements: None.
- partName - Variable in class nxopen.pdm.PartBuilder.PartNumberData
-
The part name
- partName() - Method in interface nxopen.routing.SingleDevice
-
Returns the part name
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- partName - Variable in class nxopen.RuleManager.DebugInstance
-
part of instance
- partName() - Method in interface nxopen.tooling.ClonePart
-
Returns the part name (item id in Teamcenter) before renaming.
- partName - Variable in class nxopen.uf.UFAssem.AskComponentData
-
- partname - Variable in class nxopen.uf.UFModl.ShapePatternClientDialogData
-
- partName - Variable in class nxopen.uf.UFUgmgr.AskPartNameDescData
-
- partName - Variable in class nxopen.uf.UFWave.AskBrokenLinkSourcePartData
-
- partNameAttribute() - Method in interface nxopen.preferences.SessionAssemblies
-
Returns the part name attribute
License requirements: None.
- partNameModifiable - Variable in class nxopen.pdm.PartBuilder.PartNumberData
-
Modifiable flag for part name.
- partNames - Variable in class nxopen.uf.UFWeight.Exceptions
-
- partNameStyle() - Method in interface nxopen.preferences.SessionAssemblies
-
Returns the part name style
License requirements: None.
- partNo() - Method in interface nxopen.tooling.QuickQuotationBuilder
-
Returns the part no.
- PARTNO_INVALID - Static variable in class nxopen.uf.UFUgmgr.PartnoStatus
-
- PARTNO_MODIFIED - Static variable in class nxopen.uf.UFUgmgr.PartnoStatus
-
- PARTNO_OVERRIDE - Static variable in class nxopen.uf.UFUgmgr.PartnoStatus
-
- PARTNO_VALID - Static variable in class nxopen.uf.UFUgmgr.PartnoStatus
-
- PartNode - Interface in nxopen.validate
-
Represents a part file that validator will check against.
- partNum - Variable in class nxopen.uf.UFUgmgr.AssignPartNumberData
-
- partNumber() - Method in interface nxopen.mechatronics.ComparisonResultElectricalPart
-
Returns the part number from the electrical part
License requirements: None.
- partNumber() - Method in interface nxopen.mechatronics.ElectricalPartBuilder
-
Returns the part number
License requirements: None.
- partNumber - Variable in class nxopen.pdm.PartBuilder.PartNumberData
-
The multifield key
- partNumber() - Method in interface nxopen.routing.SingleDevice
-
Returns the part number
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- partNumber - Variable in class nxopen.uf.UFUgmgr.DecodePartFileNameData
-
- partnumber - Variable in class nxopen.uf.UFUgmgr.PartFileObject
-
- PartNumberData() - Constructor for class nxopen.pdm.PartBuilder.PartNumberData
-
- PartNumberData(String, boolean, String, boolean, String, boolean) - Constructor for class nxopen.pdm.PartBuilder.PartNumberData
-
Constructor for the PartNumberData object.
- partNumberModifiable - Variable in class nxopen.pdm.PartBuilder.PartNumberData
-
Modifiable flag for part number.
- PartObject - Interface in nxopen.preferences
-
Represents the set of object preferences applicable to entire part.
- partObject() - Method in interface nxopen.validate.PartNode
-
Returns the part object
License requirements: None.
- PartObject.ColorSelection - Class in nxopen.preferences
-
Describes whether color of object is not changed or it is default color or it is defined by user
- PartObject.LineFontType - Class in nxopen.preferences
-
Represents the available types for font
- PartObject.ObjectType - Class in nxopen.preferences
-
Describes all available Types for object selection
- PartObject.WidthType - Class in nxopen.preferences
-
Describes the available types for width
- partOcc - Variable in class nxopen.uf.UFAssem.DeformData
-
- partOcc - Variable in class nxopen.uf.UFAssem.DeformedDefinitionData
-
- partOccs - Variable in class nxopen.uf.UFAssem.AskOccsOfPartData
-
- partOccs - Variable in class nxopen.uf.UFAssem.AskPartOccsOfInstData
-
- partOccs - Variable in class nxopen.uf.UFAssem.AskPartOccurrenceOfStepData
-
- partOccToDeform - Variable in class nxopen.uf.UFAssem.AssemblyDeformPartData
-
- partOccurrence() - Method in interface nxopen.annotations.DimensionMeasurementBuilder
-
Returns the measurement part occurrence
License requirements: None.
- partoccurrence - Variable in class nxopen.motion.PhysicsConversionBuilder.PhysicsData
-
- partOffDepthMode() - Method in interface nxopen.cam.RoughTurningBuilder
-
Returns the Part Off Depth Mode
License requirements: None.
- partOffDepthValue() - Method in interface nxopen.cam.RoughTurningBuilder
-
Returns the Part Off Depth Value
License requirements: None.
- partOffEvents() - Method in interface nxopen.cam.RoughTurningBuilder
-
Returns the Part Off Events
License requirements: cam_base ("CAM BASE")
.
- partOffPositionMode() - Method in interface nxopen.cam.RoughTurningBuilder
-
Returns the Part Off Position Mode
License requirements: None.
- partOffPositionPoint() - Method in interface nxopen.cam.RoughTurningBuilder
-
Returns the Part Off Position Point
License requirements: None.
- partOffset() - Method in interface nxopen.cam.GeometrySet
-
Returns the part offset value
License requirements: None.
- partOffsetBuilder() - Method in interface nxopen.cam.FeatureGeomBuilder
-
Returns the part offset (inheritable double)
License requirements: cam_base ("CAM BASE")
.
- partOpenedHandler(BasePart) - Method in interface nxopen.PartCollection.PartOpenedHandler
-
User defined method that is called whenever a part is opened.
- PartOperationAttributePropertiesBuilder - Interface in nxopen.pdm
-
- PartOperationBuilder - Interface in nxopen.pdm
-
Represents a builder class that performs various design element operations.
- PartOperationBuilder.DependentFileSaveAs - Class in nxopen.pdm
-
- PartOperationBuilder.NonMasterSaveAs - Class in nxopen.pdm
-
- PartOperationBuilder.OperationType - Class in nxopen.pdm
-
Represents an operation type that can be performed on a part .
- PartOperationCopyBuilder - Interface in nxopen.pdm
-
Represents a builder class that performs various Save As operations.
- PartOperationCopyBuilder.CopyDependentFiles - Class in nxopen.pdm
-
This enum is used to specify which dependent files
should be copied to new part during the save as operation.
- PartOperationCopyBuilder.CopyNonMasterParts - Class in nxopen.pdm
-
- PartOperationCopyBuilder.OperationSubType - Class in nxopen.pdm
-
Represents an operation sub type for copying a part
- PartOperationCreateBuilder - Interface in nxopen.pdm
-
- PartOperationCreateBuilder.OperationSubType - Class in nxopen.pdm
-
Represents an operation sub type for creating a part
- PartOperationImportBuilder - Interface in nxopen.pdm
-
- PartOperationImportBuilder.ConversionRule - Class in nxopen.pdm
-
- PartOperationImportBuilder.DefaultProjectInformationData - Class in nxopen.pdm
-
- PartOperationImportBuilder.ExistingPartAction - Class in nxopen.pdm
-
This enum is used to specify the default action for import.
- PartOperationImportBuilder.NumberingSourceOption - Class in nxopen.pdm
-
This enum is used to specify the default behavior for auto assign.
- PartOperationImportBuilder.Validation - Class in nxopen.pdm
-
This enum is used to specify the validation mode.
- PartOperationImportBuilder.ValidationRuleSetFileBrowseOption - Class in nxopen.pdm
-
This enum is used to specify the option to browse the validation rule set file from.
- PartOperationImportCallbackData - Interface in nxopen.pdm
-
JA interface for PartOperationImportCallbackData object
This cannot be created
.
- PartOperationImportObserver - Interface in nxopen.pdm
-
This class is responsible for invoking registered callbacks at different stages in import operation.
- partOperationImportObserver() - Method in interface nxopen.pdm.PdmSession
-
- PartOperationImportObserver.InitializeCb - Interface in nxopen.pdm
-
User defined Initialize callback that is called during initialization of import builder
- PartOperationImportObserver.PostCommitCb - Interface in nxopen.pdm
-
User defined PostCommit callback that is called after commit of import operation
- PartOperationImportObserver.PreAutoassignCb - Interface in nxopen.pdm
-
User defined PreAutoAssign callback that is called before auto-assigning attributes
- PartOperationImportObserver.PreCommitCb - Interface in nxopen.pdm
-
User defined PreCommit callback that is called before commit of import operation
- PartOperationImportObserver.TerminateCb - Interface in nxopen.pdm
-
User defined Terminate callback that is called during destruction of import builder
- PartOperationMakeUniqueBuilder - Interface in nxopen.pdm
-
- PartOperationValidationPropertiesBuilder - Interface in nxopen.pdm
-
- partPlacementBuilder() - Method in interface nxopen.mechanicalrouting.EditPlacementBuilder
-
Returns the
PartPlacementBuilder
License requirements: routing_base ("Routing Basic")
Created in NX12.0.0
- PartPlacementBuilder - Interface in nxopen.mechanicalrouting
-
- PartPlacementBuilder.PlacementValidationStatus - Class in nxopen.mechanicalrouting
-
The placement validation status .
- PartPlacementBuilder.PositionAsType - Class in nxopen.mechanicalrouting
-
The positioning types .
- partPosition() - Method in interface nxopen.tooling.ConceptPositionBuilder
-
Returns the part position section
License requirements: None.
- PartPreferences - Interface in nxopen.preferences
-
Represents set of preferences applicable to displayed part.
- partPreferences() - Method in interface nxopen.preferences.RoutingApplicationView
-
Routing preferences related to parts.
- PartPreviewData() - Constructor for class nxopen.assemblies.WaveQuery.PartPreviewData
-
- partPreviewMode() - Method in interface nxopen.BasePart
-
Returns the preview mode
License requirements: None.
- partRcps - Variable in class nxopen.uf.UFRoute.AskPartRcpsData
-
- partRenamedHandler(BasePart) - Method in interface nxopen.PartCollection.PartRenamedHandler
-
User defined method that is called whenever a part is renamed
License requirements: None.
- PartReopenReport - Interface in nxopen
-
Contains information about a part and its components after it has been
reopened.
- PartReopenStatus - Interface in nxopen
-
Contains information about a part after an attempt was made to
reopen it.
- PARTREV - Static variable in class nxopen.Session.ProjectAssignmentObjectType
-
item rev
- partRev - Variable in class nxopen.uf.UFUgmgr.AssignPartRevData
-
- partRevision - Variable in class nxopen.pdm.PartBuilder.PartRevisionData
-
Part revision
- partRevision - Variable in class nxopen.uf.UFUgmgr.DecodePartFileNameData
-
- PartRevisionData() - Constructor for class nxopen.pdm.PartBuilder.PartRevisionData
-
- PartRevisionData(String, boolean) - Constructor for class nxopen.pdm.PartBuilder.PartRevisionData
-
Constructor for the PartRevisionData object.
- partRevisionModifiable - Variable in class nxopen.pdm.PartBuilder.PartRevisionData
-
Revision Modifiable flag.
- partrevWhereUsed(Tag) - Method in interface nxopen.uf.UFUgmgr
-
- PartrevWhereUsedData() - Constructor for class nxopen.uf.UFUgmgr.PartrevWhereUsedData
-
- parts() - Method in interface nxopen.Session
-
Returns the
PartCollection
belonging to this session
Created in NX3.0.0
- parts - Variable in class nxopen.uf.UFRoute.AskSegmentIntPartsData
-
- parts - Variable in class nxopen.uf.UFUgmgr.ListPartsInFolderData
-
- parts - Variable in class nxopen.uf.UFWave.AskOutOfDatePartsData
-
- PARTS_GROUP - Static variable in class nxopen.drawings.ViewCopyTo3dBuilder.OutputOption
-
component parts from groups
- PARTS_IN_ASSEMBLY - Static variable in class nxopen.assemblies.RelinkerBuilder.LinkScope
-
Indicate relink scope is parts in assembly
- PARTS_IN_SESSION - Static variable in class nxopen.assemblies.RelinkerBuilder.LinkScope
-
Indicate relink scope is parts in session
- PARTS_LISTS - Static variable in class nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter
-
Parts Lists Report Filter
- PARTS_ONLY - Static variable in class nxopen.JtCreator.FileWrite
-
PARTS_ONLY
- partSafeClearance() - Method in interface nxopen.cam.CutParameters
-
- partSafeClearance() - Method in interface nxopen.cam.NcmScBuilder
-
Returns the part safe clearance
License requirements: None.
- partSafeClearance() - Method in interface nxopen.cam.NcmSmoothingBuilder
-
Returns the part safe clearance
License requirements: None.
- partsAmout() - Method in interface nxopen.tooling.QuickQuotationBuilder
-
Returns the parts amount.
- partSavedAsHandler(BasePart) - Method in interface nxopen.PartCollection.PartSavedAsHandler
-
User defined method that is called whenever a part is saved as a specified name.
- partSavedHandler(BasePart) - Method in interface nxopen.PartCollection.PartSavedHandler
-
User defined method that is called whenever a part is saved.Do not create, open, save
other parts or change active display part inside this callback.
- PartSaveOptions - Interface in nxopen
-
Contains accessor methods for all part save options that follow the part.
- PartSaveOptions.PatternData - Class in nxopen
-
Options for specifying how pattern data should be saved while saving a part .
- PartSaveStatus - Interface in nxopen
-
This class represents a list of part names with associated status codes that serve
to communicate why these parts where not able to be saved during part save.
- partSegs - Variable in class nxopen.uf.UFRoute.AskPartSegsData
-
- partSelection() - Method in interface nxopen.cam.Preferences
-
- partSelection() - Method in interface nxopen.mfg.am.MeshProperties
-
Returns the part selection
License requirements: None.
- partSet() - Method in interface nxopen.features.shipdesign.ProfileListBuilder
-
Returns the profile components to process
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- partSheetmetal() - Method in interface nxopen.preferences.PartPreferences
-
Returns object to modify the Preference settings for NX Sheetmetal application .
- PartSheetmetal - Interface in nxopen.preferences
-
Represents the NX Sheetmetal preferences applicable to part
Preferences are in control of the part.
- PartSheetmetal.BendDefinitionMethodOptions - Class in nxopen.preferences
-
This enum represents the bend definition method options in preferences.
- PartSheetmetal.FlatPatternCalloutOrientationType - Class in nxopen.preferences
-
This enum represents orientation types for the flat pattern callouts
- PartSheetmetal.FlatPatternCalloutTypeDisplay - Class in nxopen.preferences
-
The members of the following structure are the display data for a
callout in a flat pattern drawing member view.
- PartSheetmetal.FlatPatternObjectType - Class in nxopen.preferences
-
The members of the following enumerated type are used to identify
object types to the FlatPattern API.
- PartSheetmetal.FlatPatternObjectTypeDisplay - Class in nxopen.preferences
-
The members of the following structure are the display data for an
object in a flat pattern drawing member view.
- PartSheetmetal.MaterialPropertiesData - Class in nxopen.preferences
-
- PartSheetmetal.TabCurveType - Class in nxopen.preferences
-
The following members are used to identify curve types of base tab feature.
- PartSheetmetal.TabCurveTypeDisplayData - Class in nxopen.preferences
-
The members of the following structure are the display data of a tab curve type
- partSketch() - Method in interface nxopen.preferences.PartPreferences
-
Returns object to modify the Preference settings for Sketcher application .
- PartSketch - Interface in nxopen.preferences
-
Represents the set of Sketcher preferences applicable to entire part.
- PartsList - Interface in nxopen.annotations
-
Represents a Annotations.PartsList.
- partsList() - Method in interface nxopen.annotations.TableEditSettingsBuilder
-
Returns the parts list style builder
License requirements: None.
- partsList() - Method in interface nxopen.drafting.PreferencesBuilder
-
Returns the parts list style builder
License requirements: None.
- partsList - Variable in class nxopen.uf.UFAssem.Options
-
- partsList - Variable in class nxopen.uf.UFPlist.AskTagsData
-
- PartsListBuilder - Interface in nxopen.annotations
-
- PartsListBuilder.PartsListGrowDirectionOptions - Class in nxopen.annotations
-
Grow direction options
The options specify the direction of growth for the parts list
- PartsListBuilder.PartsListMainSymbolText - Class in nxopen.annotations
-
Main Symbol Text Types
Specifies the text to display in the main callout symbol
- PartsListBuilder.PartsListReferenceSymbolText - Class in nxopen.annotations
-
Reference Symbol Text Types
Specifies the text to display in the reference callout symbol
- PartsListBuilder.PartsListShowLockedDeletedRows - Class in nxopen.annotations
-
Locked deleted rows options
The options specify how to show rows that are locked, but reference components that have been removed from the assembly
- PartsListBuilder.PartsListSymbolType - Class in nxopen.annotations
-
Symbol Types
The types specify the balloon type used to call out members
- PartsListBuilder.PartsListVerticalGroupLeaderAttachment - Class in nxopen.annotations
-
Represents leader attachment for vertical callout groups.
- partSpunOutline() - Method in interface nxopen.cam.GeometryCiBuilder
-
Returns the spun outline for part
License requirements: cam_base ("CAM BASE")
.
- partStock() - Method in interface nxopen.cam.CutParameters
-
Returns the part stock
License requirements: None.
- partStockOffset() - Method in interface nxopen.cam.MillCutParameters
-
Returns the part stock offset
License requirements: None.
- partsToCleanup() - Method in interface nxopen.PartCleanup
-
- partSubType() - Method in interface nxopen.features.shipdesign.StandardPartFrameworkBuilder
-
Returns the part sub type, which is the sub category of sub type.
- PartSymbolFolder - Interface in nxopen.annotations
-
Represents a part symbol folder
To create or edit an instance of this class, use
PartSymbolFolderBuilder
Created in NX7.5.0
- PartSymbolFolderBuilder - Interface in nxopen.annotations
-
- PartSymbolFolderCollection - Interface in nxopen.annotations
-
- partSymbolFolders() - Method in interface nxopen.annotations.AnnotationManager
-
Part Symbol Folder collection .
- parttag - Variable in class nxopen.uf.UFUgmgr.PartFileObject
-
- partThickReal() - Method in interface nxopen.tooling.InitProjBuilder
-
Returns the sheet metal part thickness
License requirements: None.
- partToUse() - Method in interface nxopen.assemblies.DesignElementBuilder
-
Returns the part to use of a reuse design element.
- partType() - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
Returns the part type for onestep unform.
- partType() - Method in interface nxopen.features.shipdesign.StandardPartFrameworkBuilder
-
Returns the part type, which is the sub category of part type.
- partType() - Method in interface nxopen.linedesigner.ReuseLibraryDragData
-
Returns the part type of Reuse Library Drag data
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- partType - Variable in class nxopen.uf.UFUi.UgmgrAskCreatePartFileNameData
-
- partTypeFlag() - Method in interface nxopen.routing.RouteManager
-
Returns the type for the part used by Routing.
- partUnderSpecified(String) - Method in interface nxopen.uf.UFClone
-
- PARTUNIT - Static variable in class nxopen.cam.RoughFinishTurningBuilder.MaximumAreaModes
-
Part Unit
- PARTUNIT - Static variable in class nxopen.cam.RoughFinishTurningBuilder.MinimumAreaTypes
-
Part Unit
- partUnits() - Method in interface nxopen.BasePart
-
Returns the units of the part file.
- partUnitsEnum() - Method in interface nxopen.ASCImporter
-
Returns the part units enum
License requirements: nx_layout ("NX Layout")
.
- partUnitStr() - Method in interface nxopen.tooling.InitProjBuilder
-
Returns the units of the sheet metal part
License requirements: None.
- PartUserInterface - Interface in nxopen.preferences
-
Represents the set of User Interface preferences applicable to entire part.
- PartVisualizationColorSetting - Interface in nxopen.preferences
-
Represents the set of visualization preferences under color setting tab applicable to part
To obtain an instance of this class, refer to
PartPreferences
Created in NX3.0.0
- PartVisualizationColorSetting.RandomColorDisplayFor - Class in nxopen.preferences
-
Describes whether the random color display is applicable for faces or bodies
- PartVisualizationEmphasis - Interface in nxopen.preferences
-
Represents visualization preferences for emphasis that are applicable
to the entire part.
- PartVisualizationEmphasis.EdgesType - Class in nxopen.preferences
-
Determines whether or not edges are displayed for de-emphasized
shaded geometry.
- PartVisualizationEmphasis.LayersOptions - Class in nxopen.preferences
-
Specifies options that control the appearance of de-emphasized
shaded geometry when the See-Thru style is set to Layers.
- PartVisualizationEmphasis.OriginalColorShellOptions - Class in nxopen.preferences
-
Specifies options that control the appearance of de-emphasized
shaded geometry when the See-Thru style is set to Original Color
Shell.
- PartVisualizationEmphasis.SeeThruStyleType - Class in nxopen.preferences
-
Determines how translucency and color are used to de-emphasize
shaded geometry.
- PartVisualizationEmphasis.ShellOptions - Class in nxopen.preferences
-
Specifies options that control the appearance of de-emphasized
shaded geometry when the See-Thru style is set to Shell.
- PartVisualizationEmphasis.WireframeBlendOptions - Class in nxopen.preferences
-
Specifies options that control the color-blending effect used to
de-emphasize wireframe geometry.
- PartVisualizationLine - Interface in nxopen.preferences
-
Represents the set of visualization preferences under Line tab applicable to part
To obtain an instance of this class, refer to
PartPreferences
Created in NX3.0.0
- PartVisualizationLine.LineFontDisplayType - Class in nxopen.preferences
-
Describes whether Line Font Display type is hardware or software.
- PartVisualizationLine.PixelWidthOptionsData - Class in nxopen.preferences
-
- PartVisualizationLine.WidthOptionsData - Class in nxopen.preferences
-
- PartVisualizationNamesBorders - Interface in nxopen.preferences
-
Represents the set of visualization preferences of entire Working Part coming under Names/borders Tab
To obtain an instance of this class, refer to
PartPreferences
Created in NX3.0.0
- PartVisualizationNamesBorders.NameDisplay - Class in nxopen.preferences
-
Describes the available options for object name display selection
- PartVisualizationPerformance - Interface in nxopen.preferences
-
Represents the set of visualization performance preferences
applicable to entire part.
- PartVisualizationScreen - Interface in nxopen.preferences
-
Represents the set of visualization preferences under screen tab applicable to part
To obtain an instance of this class, refer to
PartPreferences
Created in NX12.0.0
- PartVisualizationScreen.ViewTriadLocation - Class in nxopen.preferences
-
The view triad location types.
- PartVisualizationShade - Interface in nxopen.preferences
-
Represents the set of shade visualization preferences applicable to entire part
To obtain an instance of this class, refer to
PartPreferences
Created in NX3.0.0
- PartVisualizationShade.AdvViewToleranceType - Class in nxopen.preferences
-
Describes the available tolerance types for Advanced View.
- PartVisualizationShade.AdvVisViewFacetTolerancesData - Class in nxopen.preferences
-
- PartVisualizationShade.HiddenShadedFaceEdges - Class in nxopen.preferences
-
Describes whether the shaded face edges are invisible or dashed visible or with a color to depict the hidden geometry
- PartVisualizationShade.ShadedFaceEdge - Class in nxopen.preferences
-
Describes whether the shaded face edges are having no color or body color or user defined color.
- PartVisualizationShade.ShadedViewFacetTolerancesData - Class in nxopen.preferences
-
- PartVisualizationShade.ShadedViewToleranceType - Class in nxopen.preferences
-
Describes the available tolerance types for Shaded View.
- PartVisualizationShade.ViewUpdateModeType - Class in nxopen.preferences
-
Describes whether the applied changes are applicable to visible object or all object or no object
- PartVisualizationVisual - Interface in nxopen.preferences
-
Represents the set of visualization preferences applicable to entire session
To obtain an instance of this class, refer to
PartPreferences
Created in NX3.0.0
- partVolume() - Method in interface nxopen.tooling.MoldFeatureRecognitionBuilder
-
Returns the product body volume
License requirements: None.
- partVolume() - Method in interface nxopen.tooling.SheetMetalFeatureRecognitionBuilder
-
Returns the product body volume
License requirements: None.
- pass() - Method in interface nxopen.cam.InPathEventDataBuilder
-
Returns the Inpath Event pass number
License requirements: cam_base ("CAM BASE")
.
- PASS - Static variable in class nxopen.features.shipdesign.ExamineSteelFeatureBuilderResult
-
All pass
- PASS - Static variable in class nxopen.mechanicalrouting.LogicalDesignService.MappingStatus
-
- PASS - Static variable in class nxopen.Validation.Result
-
Validation Pass all checks
- PASS_FIRST - Static variable in class nxopen.cam.WedmCutOrderBuilder.Type
-
Cut pass first
- PASS_THROUGH_CURVES - Static variable in class nxopen.features.FillHoleBuilder.ShapeControlTypes
-
- PASSED - Static variable in class nxopen.cae.modelcheck.TestValueTypes.Result
-
indicates the test value does not violate the criteria values
- PASSED - Static variable in class nxopen.validate.OverrideBuilder.ToStates
-
- PASSED - Static variable in class nxopen.weld.ConnectionFinderBuilder.FilterTypes
-
- PASSENGER - Static variable in class nxopen.features.vehicledesign.ManikinBuilder.PositionType
-
Passenger Type
- PASSENGER_SIDE - Static variable in class nxopen.features.vehicledesign.MirrorCertificationBuilder.LocationType
-
- passengerDefinition() - Method in interface nxopen.features.vehicledesign.BaseDataBuilder
-
Returns the passenger definition.
- passengerPlane() - Method in interface nxopen.features.vehicledesign.VisionPlaneBuilder
-
Returns the passenger side plane inclined angle.
- passengerSideExtension() - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder
-
Returns the expression containing the value for the passenger side extension.
- passengerSideStandard() - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder
-
Returns the standard for passenger side mirror.
- PASSES - Static variable in class nxopen.cam.DmCmMultiplePassesCiBuilder.WallStepMethodType
-
Passes
- PASSES - Static variable in class nxopen.cam.MultiDepthCut.Types
-
Passes
- PASSES - Static variable in class nxopen.cam.MultiplePassesBuilder.StepMethodTypes
-
Passes
- PASSIVE - Static variable in class nxopen.geometricutilities.OrientXpressBuilder.Axis
-
Passive axis input mode
- PASSIVE - Static variable in class nxopen.geometricutilities.OrientXpressBuilder.Plane
-
Passive plane input mode
- PAST - Static variable in class nxopen.cam.TeachmodeLinearMoveBuilder.CurveToolPositionTypes
-
Past Curve
- paste(int[]) - Method in interface nxopen.cam.ObjectContainer
-
Paste CAM Objects
License requirements: None.
- paste(int, String[], String[]) - Method in interface nxopen.gateway.BaseExplicitOrderBuilder
-
Pastes the rows that have been previously selected using the cut operation
License requirements: None.
- pasteAttribute() - Method in interface nxopen.tooling.ObjectAttributeManagementBuilder
-
The action to paste copied attributes
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- pasteAttributes(FamilyAttribute) - Method in interface nxopen.partfamily.TemplateManager
-
Paste the cut attributes of a part family.
- pasteBefore(int[]) - Method in interface nxopen.cam.ObjectContainer
-
Paste before CAM Objects
License requirements: None.
- PasteBuilder - Interface in nxopen.gateway
-
- PasteCageData - Interface in nxopen.features.subdivision
-
- PasteFace - Interface in nxopen.features
-
Represents a paste face feature
To create or edit an instance of this class, use
PasteFaceBuilder
Created in NX6.0.0
- PasteFaceBuilder - Interface in nxopen.features
-
Represents a builder for a paste face feature.
- PasteFaceBuilder.PasteOptionType - Class in nxopen.features
-
represents the paste option which defines whether the tool body is additive or subtractive.
- pasteFeatures(Tag[], int, Tag[], Tag[], int, int, int) - Method in interface nxopen.uf.UFModeling
-
- pasteMethod() - Method in interface nxopen.tooling.ReusableObjectPasteBuilder
-
Returns the design option to select Boolean operation type
License requirements: None.
- pasteNode(int, NavigatorNode) - Method in interface nxopen.shipdesign.NavigatorCollection
-
Paste navigator node.
- pasteObjects(AMEBaseNode) - Method in interface nxopen.ame.AMEManager
-
Pastes objects from the clipboard under given parent
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- pasteObjects(CAMSetup.View, CAMObject[], CAMObject, CAMSetup.Paste) - Method in interface nxopen.cam.InspectionSetup
-
Paste objects after cut
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- PasteObjectsData() - Constructor for class nxopen.ame.AMEManager.PasteObjectsData
-
- pasteOption() - Method in interface nxopen.features.AdmMoveFaceBuilder
-
Returns the paste option.
- pasteOption() - Method in interface nxopen.features.PasteFaceBuilder
-
Returns the paste option defines whether the tool body is additive or subtractive.
- pasteSchematicObjects(PageObject, double, double) - Method in interface nxopen.ame.DiagramManager
-
Paste schematic object
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- pasteSection() - Method in interface nxopen.die.AddendumSectionBuilder
-
Paste section.
- pasteSectionFromCurve(Curve) - Method in interface nxopen.die.AddendumSectionBuilder
-
Creates a section by reading the section parameters from the input curve and pasting at
the location specified by
AddendumSectionBuilder.sectionPoint()
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
Created in NX7.5.0
- PasteSpecialBuilder - Interface in nxopen
-
- PasteSpecialBuilder.DestinationOption - Class in nxopen
-
This enum represents the paste ppecial destination coordinate system options
- PasteSpecialBuilder.LayerOption - Class in nxopen
-
This enum represents the paste special layer options
- pastestatus - Variable in class nxopen.ame.AMEManager.PasteObjectsData
-
- pasteSystemObject(SystemObject) - Method in interface nxopen.mechatronics.MechatronicsManager
-
Pastes the system engeering objects from the clipboard.
- pasteTraceLink(SystemObject) - Method in interface nxopen.mechatronics.MechatronicsManager
-
- pasteType() - Method in interface nxopen.drafting.CutCopyPasteBuilder
-
Returns the paste type
License requirements: None.
- pasteViews(DrawingSheet, DraftingView[], DraftingViewCollection.ViewCopyDetailOption, DraftingViewCollection.ViewCopyAnnotOption) - Method in interface nxopen.drawings.DraftingViewCollection
-
Paste views
License requirements: drafting ("DRAFTING")
.
- pastPartDist - Variable in class nxopen.uf.UFDraw.ArrowParms
-
- patch() - Method in interface nxopen.features.FillHoleBuilder
-
Returns the patch into part flag
License requirements: None.
- patch() - Method in interface nxopen.features.FlowBlendBuilder
-
Returns the toggle to specify patch to body or not
License requirements: None.
- Patch - Interface in nxopen.features
-
Represents a Patch feature
To create or edit an instance of this class, use
PatchBuilder
Created in NX6.0.1
- patch() - Method in interface nxopen.MeshParameterData
-
Returns
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- PATCH - Static variable in class nxopen.motion.BodyContactRecurdyn.ContactType
-
- patch() - Method in interface nxopen.tooling.SolidPatchBuilder
-
Returns the tool bodies selected as linked source bodies for patching up the target body.
- patch - Variable in class nxopen.uf.UFModlFeatures.AskThruCurves1Data
-
- patch - Variable in class nxopen.uf.UFModlFeatures.AskThruCurvesData
-
- PATCH_BEZIER - Static variable in class nxopen.MeshParameterData.Type
-
- PATCH_BSPLINE - Static variable in class nxopen.MeshParameterData.Type
-
- PATCH_CLOSED_BSPLINE - Static variable in class nxopen.MeshParameterData.Type
-
- PATCH_MATCH_STRING - Static variable in class nxopen.MeshParameterData.Type
-
- PATCH_SURFACE - Static variable in class nxopen.tooling.AssignPatchBuilder.Types
-
- PATCH_TOLERANCE - Static variable in class nxopen.geometricutilities.RefitControlBuilder.RefitControlMethod
-
Patch and tolerance
- patchBody(Tag, Tag, int) - Method in interface nxopen.uf.UFModeling
-
- PatchBuilder - Interface in nxopen.features
-
Represents a
PatchBuilder
Lets you use a sheet body to replace some of the faces of a solid body.
- patchColor() - Method in interface nxopen.tooling.AssignPatchBuilder
-
Returns the patch surface color.
- PatchColorData() - Constructor for class nxopen.tooling.AssignPatchBuilder.PatchColorData
-
- patchComplexGeometryAreas() - Method in interface nxopen.features.EdgeBlendBuilder
-
Returns the Patch Areas option
License requirements: None.
- PATCHED_AND_ALL_SUPPRESSED - Static variable in class nxopen.tooling.EdgePatchBuilder.PatchStatus
-
All patched bodies are suppressed
- PATCHED_AND_NO_SUPPRESSED - Static variable in class nxopen.tooling.EdgePatchBuilder.PatchStatus
-
No patched body is suppressed
- PATCHED_AND_SOME_SUPPRESSED - Static variable in class nxopen.tooling.EdgePatchBuilder.PatchStatus
-
Some patched bodies are suppressed
- PATCHED_SURFACES - Static variable in class nxopen.tooling.MWCopySheetsBuilder.Types
-
Sheet type - patched sheets
- PatchOpenings - Interface in nxopen.features
-
Represents a Patch Openings feature
To create or edit an instance of this class, use
PatchOpeningsBuilder
Created in NX5.0.0
- PatchOpeningsBuilder - Interface in nxopen.features
-
Represents a builder for a Patch Openings feature.
- PatchOpeningsBuilder.CreatePathFromOpeningData - Class in nxopen.features
-
- PatchOpeningsBuilder.OutputTypes - Class in nxopen.features
-
Indicates what to output
- PatchOpeningsBuilder.Types - Class in nxopen.features
-
The method used to patch the opening
- patchSolutionFlag() - Method in interface nxopen.features.FeatureBuilder
-
Returns the patch solution flag
License requirements: None.
- patchSurface() - Method in interface nxopen.tooling.EdgePatchBuilder
-
Returns the indication to create patch surface bodies in core/cavity.
- patchSurfaceFilename() - Method in interface nxopen.features.FeatureBuilder
-
Returns the patch surface filename
License requirements: None.
- patchSurfaces() - Method in interface nxopen.tooling.AssignPatchBuilder
-
Returns the selected surfaces added as patch surfaces or deleted from patch surfaces.
- patchType() - Method in interface nxopen.features.ThroughCurvesBuilder
-
Returns the patch type.
- patchType() - Method in interface nxopen.tooling.SolidPatchBuilder
-
Returns the patch type of the solid patch creation.
- path() - Method in interface nxopen.ame.TiaProjectItemBuilder
-
Returns the project item path
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- path() - Method in interface nxopen.annotations.SymbolCatalogBuilder
-
Returns the path, get it from the reuse library
License requirements: None.
- path() - Method in interface nxopen.blockstyler.FileSelection
-
Returns the Path
License requirements: None.
- path() - Method in interface nxopen.blockstyler.FolderSelection
-
Returns the Path
License requirements: None.
- path() - Method in interface nxopen.blockstyler.OnPathDimension
-
Returns the Path
License requirements: None.
- PATH - Static variable in class nxopen.cae.ElementExtrudeBuilder.MethodType
-
along path
- path() - Method in interface nxopen.cae.SimLoadRecipeSource
-
- Path - Interface in nxopen.cam
-
Represets a Cam Tool Path
This is a Subobject and cannot be publicly instantiated.
- PATH - Static variable in class nxopen.cam.ToolPathEditorBuilder.TrimMethod
-
- path() - Method in interface nxopen.features.GeomcopyBuilder
-
Returns the section path for along path type of instancing.
- path - Variable in class nxopen.features.PatchOpeningsBuilder.CreatePathFromOpeningData
-
The curve created by combining object_array items.
- path() - Method in interface nxopen.geometricutilities.OnPathDimensionBuilder
-
Returns the path that the dimension is evaluated on.
- PATH - Static variable in class nxopen.geometricutilities.OnPathDimensionBuilder.UpdateReason
-
Update because of the path may have changed
- path() - Method in interface nxopen.layout2d.ReplaceComponentBuilder
-
Returns the path of the 2D Component definition to replace
License requirements: None.
- PATH - Static variable in class nxopen.motion.RoadBuilder.TypeChoices
-
Path
- Path - Interface in nxopen.routing
-
The Routing Path object is the set of ordered continuous segments.
- path - Variable in class nxopen.uf.UF.FindAllSubdirectoriesData
-
- path() - Method in interface nxopen.UFSession
-
- Path.IsToolpathEventAMotionData - Class in nxopen.cam
-
- Path.IsToolpathEventUdeData - Class in nxopen.cam
-
- PATH_BLOCK_FEATURE - Static variable in class nxopen.cam.ToolpathEventType
-
- PATH_BLOCK_NCM - Static variable in class nxopen.cam.ToolpathEventType
-
- PATH_BLOCK_REGION - Static variable in class nxopen.cam.ToolpathEventType
-
- PATH_EVENTS - Static variable in class nxopen.sim.SimDebugBuilder.DumpType
-
Dump Path Events
- PATH_FOLLOWER_CONTROL_INPUT - Static variable in class nxopen.motion.TextBasedElementBuilder.TypeChoices
-
- PATH_LENGTH - Static variable in class nxopen.cae.PostGraphAlongPathBuilder.Xaxis
-
- PATH_LOCATIONS - Static variable in class nxopen.formboard.FlipComponentBuilder.AxisType
-
Flip component by path locations
- PATH_MARKER_EVENT - Static variable in class nxopen.cam.ToolpathEventType
-
- pathAdjustmentAngle() - Method in interface nxopen.features.sheetmetal.FlexibleCableSegment
-
Returns the path adjustment angle.
- pathAdjustmentAngleDirection() - Method in interface nxopen.features.sheetmetal.FlexibleCableSegment
-
Returns the path adjustment angle direction.
- PathArrangementBuilder - Interface in nxopen.routing.electrical
-
Builder class to manage Path Arrangements.
- pathAxisSel() - Method in interface nxopen.formboard.FlipComponentBuilder
-
Returns the axis selected by user about which selected formboard component
will be flipped.
- pathBrowser() - Method in interface nxopen.tooling.ElectrodeInitializationBuilder
-
Returns the path browser.
- PathCircularMotion - Interface in nxopen.cam
-
This class represents the data of a Linear Motion .
- pathCollector() - Method in interface nxopen.features.SectionInertiaAnalysisBuilder
-
Returns the path collector
License requirements: None.
- PathConnection - Interface in nxopen.routing.electrical
-
Describes a connection that has a path
From and To terminals are not coincident and need a path definition to be routable.
- PathConnectionCollection - Interface in nxopen.routing.electrical
-
- pathConnections() - Method in interface nxopen.routing.RouteManager
-
PathConnection collection .
- PathConstraintFrameBuilder - Interface in nxopen.mechatronics
-
Represents a frame that constrains the orientation along the path curve.
- PathConstraintFrameBuilder.CurveTypes - Class in nxopen.mechatronics
-
the curve types
- PathConstraintFrameBuilderList - Interface in nxopen.mechatronics
-
Represents a list of objects.
- PathConstraintJoint - Interface in nxopen.mechatronics
-
Represents the Path Constraint Joint class.
- PathConstraintJointBuilder - Interface in nxopen.mechatronics
-
- PathConstraintJointBuilder.PathTypes - Class in nxopen.mechatronics
-
the path types
- PathConstraintJointCollection - Interface in nxopen.mechatronics
-
Represents a collection of Path Constraint Joint.
- pathConstraintJoints() - Method in interface nxopen.mechatronics.PhysicsManager
-
- PathContactMotion - Interface in nxopen.cam
-
This class represents the data of a Linear Motion .
- pathCurve() - Method in interface nxopen.routing.DuctReinforcementBuilder
-
Returns the path curve that is used to specify perpendicular reinforcement defining points.
- pathCurve() - Method in interface nxopen.routing.OverstockBuilder
-
Returns the path curve that is used to specify overstock defining points.
- pathData - Variable in class nxopen.uf.UFRoute.FindPathData
-
- pathDatatype() - Method in interface nxopen.motion.RoadBuilder
-
Returns the path datatype of the road object
License requirements: mechanisms ("MECHANISMS")
.
- pathDelete(int) - Method in interface nxopen.cae.Post
-
- pathDisplay() - Method in interface nxopen.cam.CAMSession
-
Returns the
PathDisplay
belonging to this cam session
Created in NX10.0.2
- pathDisplay() - Method in interface nxopen.cam.MethodBuilder
-
Returns the sub builder for path display
License requirements: None.
- pathDisplay() - Method in interface nxopen.cam.OperationDisplayOptionsBuilder
-
Returns the sub builder for path display
License requirements: None.
- PathDisplay - Interface in nxopen.cam
-
Represents a class that is used for NX testing.
- PathDisplay.ColorByType - Class in nxopen.cam
-
Choices for coloring the tool path motions
- pathDisplayColors() - Method in interface nxopen.cam.MethodBuilder
-
Returns the sub builder for path display colors
License requirements: None.
- pathDisplayColors() - Method in interface nxopen.cam.OperationDisplayOptionsBuilder
-
Returns the path display colors builder
License requirements: cam_base ("CAM BASE")
.
- PathDisplayColors - Interface in nxopen.cam
-
Represents a path display colors Builder
This is an abstract class and cannot be instantiated.
- pathDisplayOptions() - Method in interface nxopen.cam.OperationBuilder
-
Returns the path display options builder
License requirements: None.
- pathDisplayType() - Method in interface nxopen.cam.DisplayPath
-
Returns the path display types
License requirements: None.
- pathDisplayType() - Method in interface nxopen.cam.OperationDisplayOptionsBuilder
-
Returns the path display types
License requirements: None.
- pathedges - Variable in class nxopen.cae.EdgePathMethod.PathEdgesData
-
resultant edges
- PathEdgesData() - Constructor for class nxopen.cae.EdgePathMethod.PathEdgesData
-
- PathEdgesData() - Constructor for class nxopen.cae.ElemEdgePathMethod.PathEdgesData
-
- pathelemedges - Variable in class nxopen.cae.ElemEdgePathMethod.PathEdgesData
-
resultant element edges
- pathErrors() - Method in interface nxopen.routing.QuickPathBuilder
-
Returns the errors associated with this path.
- PathEvent - Interface in nxopen.cam
-
Represets a Cam Tool Path Event
This is a Subobject and cannot be publicly instantiated.
- pathFileName() - Method in interface nxopen.motion.RoadBuilder
-
Returns the path and file name of the path curve
License requirements: mechanisms ("MECHANISMS")
.
- pathForwardThroughExtensionVector() - Method in interface nxopen.mechanicalrouting.PathTransitionBuilder
-
Returns the toggle setting to define whether the path passes forward through the extension vector, or backward.
- pathFrame() - Method in interface nxopen.mechatronics.PathConstraintFrameBuilder
-
Returns the path frame.
- pathGeometry() - Method in interface nxopen.features.shipdesign.EdgeCutBuilder
-
Returns the path geometry.
- pathGeometry() - Method in interface nxopen.features.shipdesign.StiffenerBuilder
-
Returns the path geometry
License requirements: None.
- PathHelixMotion - Interface in nxopen.cam
-
This class represents the data of a Linear Motion .
- pathId() - Method in interface nxopen.cae.PostGraphAlongPathBuilder
-
Returns the path id to define the x axis with path
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- pathIncrement() - Method in interface nxopen.features.VarsweepBuilder
-
Returns the path increment
License requirements: None.
- pathInLib() - Method in interface nxopen.linedesigner.ReuseLibraryDragData
-
Returns the path in library of drag data
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- PathLaserDepositionData - Interface in nxopen.cam
-
Definition for Laser deposition data .
- PathLaserGeometryData - Interface in nxopen.cam
-
Definition for Laser geometry data .
- PathLaserMachineData - Interface in nxopen.cam
-
Definition for Laser machine data .
- PathLaserOptimizationData - Interface in nxopen.cam
-
Definition for Laser optimization data .
- PathLaserPowderData - Interface in nxopen.cam
-
Definition for Laser powder data .
- PathLaserProcessorData - Interface in nxopen.cam
-
Definition for Laser processor data .
- PathLengthAnnotationBuilder - Interface in nxopen.formboard
-
- PathLengthAnnotationBuilder.Types - Class in nxopen.formboard
-
TODO: Document the whole type
- pathLengthMultiplier() - Method in interface nxopen.routing.electrical.Connection
-
Returns the path length multiplier.
- pathLengthOffset() - Method in interface nxopen.routing.electrical.Connection
-
Returns the path length offset.
- PathLevelMarker - Interface in nxopen.cam
-
This class represents the data of a Linear Motion .
- PathLimits - Interface in nxopen.geometricutilities
-
Represents a path limits data.
- PathLinearMotion - Interface in nxopen.cam
-
This class represents the data of a Linear Motion .
- PathLinearMotion.FeedrateData - Class in nxopen.cam
-
- pathList() - Method in interface nxopen.weld.WeldBeadBuilder
-
Returns the list containing the defined path segments.
- pathLocation() - Method in interface nxopen.weld.WeldBeadSizeBuilder
-
Returns the location on the path to place the bead shape.
- pathName() - Method in interface nxopen.geometricutilities.PointsFromFileBuilder
-
Returns the path name of the point data file
License requirements: None.
- pathName() - Method in interface nxopen.tooling.InitProjectBuilder
-
Returns the project path access functions
License requirements: None.
- pathNormalType() - Method in interface nxopen.cam.OperationDisplayOptionsBuilder
-
Returns the path normal types
License requirements: None.
- pathObject() - Method in interface nxopen.features.subdivision.SubdivisionTubeBuilder
-
Returns the object as path of tube.
- PathObjects - Interface in nxopen.fields
-
Contains objects that define a lattice path
Not a KF builder; see Fields.FieldManager methods to create a Fields.PathObjects.
- PathObjectsList - Interface in nxopen.fields
-
Represents a list of objects.
- pathOffset() - Method in interface nxopen.features.shipdesign.StiffenerBuilder
-
Returns the path offset expression
License requirements: None.
- pathOpName() - Method in interface nxopen.cam.InspectionPathBuilder
-
Returns the inspection path operation name
License requirements: None.
- pathOrderEnum() - Method in interface nxopen.cam.InspectionLinkPmiBuilder
-
Returns the path order optimization type enum
License requirements: None.
- pathParameter() - Method in interface nxopen.mechatronics.PathConstraintFrameBuilder
-
Returns the path parameter.
- pathPositionType() - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder
-
Returns the path position types used to define close range visibility.
- pathPreview() - Method in interface nxopen.mechatronics.PathConstraintJointBuilder
-
Returns the path preview
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- pathReverseDirection() - Method in interface nxopen.features.shipdesign.EdgeCutBuilder
-
Returns the path reverse direction flag.
- pathReverseDirection() - Method in interface nxopen.features.shipdesign.StiffenerBuilder
-
Returns the path reverse direction flag
License requirements: None.
- paths - Variable in class nxopen.routing.ManualRouteBuilder.FindPathsFromMultiplePointsData
-
- paths - Variable in class nxopen.uf.UFRoute.AskBuiltInPathsData
-
- paths - Variable in class nxopen.uf.UFRoute.AskSegmentPathsData
-
- paths - Variable in class nxopen.uf.UFRoute.AskSegmentsPathsData
-
- pathSection() - Method in interface nxopen.features.TubeBuilder
-
Returns the path section
License requirements: None.
- pathSection() - Method in interface nxopen.weld.WeldBeadPathBuilder
-
Returns the section defining the path.
- pathsegments - Variable in class nxopen.routing.Stock.BodySegmentMapData
-
Path segments.
- pathSelection() - Method in interface nxopen.mechanicalrouting.MovePathBuilder
-
Returns the objects that make up the path that needs to be transformed.
- pathSelection() - Method in interface nxopen.routing.TransformPathBuilder
-
Returns the path selection.
- pathSettings() - Method in interface nxopen.routing.QuickPathBuilder
-
Returns the linear path settings for this path.
- pathSize - Variable in class nxopen.uf.UFRoute.FindPathData
-
- pathstartnodes - Variable in class nxopen.cae.ElemEdgePathMethod.PathEdgesData
-
resultant start vertices
- pathstartvertices - Variable in class nxopen.cae.EdgePathMethod.PathEdgesData
-
resultant start vertices
- pathStockBuilder() - Method in interface nxopen.routing.LinearPathBuilder
-
Returns the builder for assigning stock to the new path.
- PathStockBuilder - Interface in nxopen.routing
-
Assigns stocks to segments based of users critiera and the current
default stock.
- PathStockBuilder._specified_stock_with_applied_charxData - Class in nxopen.routing
-
- PathStockBuilder.AssignMethod - Class in nxopen.routing
-
Determines how to choose which stock to assign.
- PathStockBuilder.AssignStockType - Class in nxopen.routing
-
Determines the type of stock being assigned.
- PathStockBuilder.RectangularDimensionsData - Class in nxopen.routing
-
- PathStockPreferenceBuilder - Interface in nxopen.mechanicalrouting
-
Assigns stocks to segments based on user's criteria and the current default stock.
- PathStockPreferenceBuilder.AssignMethod - Class in nxopen.mechanicalrouting
-
- PathStockPreferenceBuilder.AssignStockSubType - Class in nxopen.mechanicalrouting
-
Determines the type of sub stock being assigned.
- PathStockPreferenceBuilder.AssignStockType - Class in nxopen.mechanicalrouting
-
Determines the type of stock being assigned.
- PathStockPreferenceBuilder.SpaceReservationMethod - Class in nxopen.mechanicalrouting
-
Determines how to choose which space reservation to assign.
- PathStockPreferenceBuilder.StockMethod - Class in nxopen.mechanicalrouting
-
Determines how to choose which stock to assign.
- pathtangent - Variable in class nxopen.weld.WeldBeadPathBuilder.UpdatePathData
-
Tangent to path at evaluationPoint
- PathTransitionBuilder - Interface in nxopen.mechanicalrouting
-
- PathTransitionBuilder.HealOrientation - Class in nxopen.mechanicalrouting
-
The box orientation for heal transition traversal order.
- PathTransitionBuilder.TraversalOrder - Class in nxopen.mechanicalrouting
-
The heal transition traversal order the path takes to reach the transition end point.
- PathTransitionBuilder.Type - Class in nxopen.mechanicalrouting
-
The type of transition the path takes to reach the transition end point.
- PathTransitionBuilderList - Interface in nxopen.mechanicalrouting
-
Represents a list of objects.
- pathTransitionBuilderList() - Method in interface nxopen.mechanicalrouting.PathTransitionListManagerBuilder
-
Returns the list of path transition builders that describe the path.
- pathTransitionListManagerBuilder() - Method in interface nxopen.mechanicalrouting.CreatePathBuilder
-
Returns the builder for managing path transitions that make up the path.
- PathTransitionListManagerBuilder - Interface in nxopen.mechanicalrouting
-
- pathType() - Method in interface nxopen.mechatronics.PathConstraintJointBuilder
-
Returns the path type.
- pathVector() - Method in interface nxopen.cam.OperationDisplayOptionsBuilder
-
Returns the path vector
License requirements: None.
- patt() - Method in interface nxopen.UFSession
-
- pattern() - Method in interface nxopen.annotations.HatchBuilder
-
- pattern() - Method in interface nxopen.annotations.HatchFillSettingsBuilder
-
Returns the pattern
License requirements: None.
- PATTERN - Static variable in class nxopen.cae.DurabilityStaticEventBuilder.ExcitationTypeEnum
-
Pattern
- pattern() - Method in interface nxopen.cae.DurSpecialistBlockLoadEventBuilder
-
Returns the pattern.
- PATTERN - Static variable in class nxopen.cae.DurSpecialistSuperpositionEventBuilder.MatchUsingType
-
Match using a regular expression
- pattern() - Method in interface nxopen.cae.WeldBuilder
-
Returns the pattern used to specify locations on the edge(s)
License requirements: None.
- PATTERN - Static variable in class nxopen.cam.CamInspectionOperationFeaturetypes
-
Pattern
- PATTERN - Static variable in class nxopen.cam.InspectionMethodBuilder.MethodTypes
-
Pattern
- pattern() - Method in interface nxopen.cam.MultiRamp
-
Returns the multi ramp pattern
License requirements: None.
- PATTERN - Static variable in class nxopen.features.PointSetBuilder.FacePointsType
-
Points will be created based on a defined pattern.
- PATTERN - Static variable in class nxopen.Sketch.ConstraintType
-
- PATTERN - Static variable in class nxopen.uf.UFSket.ConType
-
- PATTERN_CIRCULAR - Static variable in class nxopen.tooling.ReusePositioningObjectBuilder.Types
-
circular type
- PATTERN_COUNT - Static variable in class nxopen.uf.UFGdt.ModifierTypes
-
- PATTERN_FEATURE - Static variable in class nxopen.features.PatternFeatureBuilder.OutputOptions
-
Pattern Feature
- PATTERN_FEATURE_COUNT - Static variable in class nxopen.annotations.HoleCalloutSettingsBuilder.Parametertype
-
- PATTERN_FILE_SELECTION - Static variable in class nxopen.formboard.FaceAnnotationBuilder.Types
-
Import a pattern file
- PATTERN_LINEAR - Static variable in class nxopen.tooling.ReusePositioningObjectBuilder.Types
-
linear type
- PATTERN_PLANE_NORMAL - Static variable in class nxopen.geometricutilities.PatternOrientation.ProjDirEnum
-
use pattern plane normal as project direction.
- PATTERN_SWARM - Static variable in class nxopen.optimization.OptimizationBuilder.OptimizationAlgorithmType
-
Pattern swarm
- patternCenterPoint() - Method in interface nxopen.cam.AreaMillingNonSteepContainment
-
Returns the Pattern Center Point
License requirements: None.
- patternCenterPoint() - Method in interface nxopen.cam.DmAmBuilder
-
Returns the Pattern Center Point
License requirements: None.
- patternCenterPoint() - Method in interface nxopen.cam.DmBndBuilder
-
Returns the Pattern Center Point
License requirements: None.
- patternCenterPoint() - Method in interface nxopen.cam.DmSpiralBuilder
-
Returns the Pattern Center Point
License requirements: None.
- PatternClocking - Interface in nxopen.geometricutilities
-
- PatternClocking.ClockingType - Class in nxopen.geometricutilities
-
Deprecated.
type of pattern clocking to transform individual instances
- PatternClockingBuilder - Interface in nxopen.geometricutilities
-
- PatternClockingBuilder.ClockingType - Class in nxopen.geometricutilities
-
type of pattern clocking to transform individual instances
- patternDataToSave() - Method in interface nxopen.PartSaveOptions
-
Returns the option indicating how pattern data will be saved while saving
a part
License requirements: None.
- patternDefinedBy() - Method in interface nxopen.annotations.LightweightSectionBuilder
-
Returns the crosshatch pattern defined by
License requirements: None.
- patterndefinition - Variable in class nxopen.assemblies.Component.FindComponentPatternsData
-
A Pattern which refers 'component' as one of its output instances
- patternDefinition() - Method in interface nxopen.features.PatternFaceFeatureBuilder
-
Returns the pattern definition service.
- PatternDefinition - Interface in nxopen.geometricutilities
-
pattern spacing for several pattern based commands.
- PatternDefinition.PatternEnum - Class in nxopen.geometricutilities
-
pattern types available.
- patterndefinitions - Variable in class nxopen.assemblies.Component.FindComponentPatternsData
-
List of patterns which refer 'component' as its master component
- patternDirection() - Method in interface nxopen.cam.AreaMillingNonSteepContainment
-
Returns the pattern direction
License requirements: None.
- patternDirection() - Method in interface nxopen.cam.FlowCutSteepContainment
-
Returns the pattern direction
License requirements: None.
- patternDirection() - Method in interface nxopen.cam.MillCutParameters
-
Returns the pattern direction
License requirements: cam_base ("CAM BASE")
.
- patternDisplayFrequency() - Method in interface nxopen.cam.OperationDisplayOptionsBuilder
-
Returns the pattern display frequency
License requirements: None.
- patternDisplayType() - Method in interface nxopen.cam.OperationDisplayOptionsBuilder
-
Returns the pattern display types
License requirements: None.
- PatternFace - Interface in nxopen.features
-
Represents a pattern face feature , don't use it until nx502
To create or edit an instance of this class, use
PatternFaceBuilder
Created in NX5.0.2
- PatternFaceBuilder - Interface in nxopen.features
-
Represents a builder for a pattern face feature, don't use it until nx502.
- PatternFaceBuilder.PatternTypes - Class in nxopen.features
-
Enumeration of pattern type, don't use it until nx502 .
- PatternFaceFeature - Interface in nxopen.features
-
Represents a pattern face feature
To create or edit an instance of this class, use
PatternFaceFeatureBuilder
Created in NX9.0.0
- PatternFaceFeatureBuilder - Interface in nxopen.features
-
Represents a builder for a pattern face feature, post NX9.
- PatternFeature - Interface in nxopen.features
-
Represents a pattern feature
To create or edit an instance of this class, use
PatternFeatureBuilder
Created in NX7.0.0
- patternFeature() - Method in interface nxopen.tooling.ReusableObjectPasteBuilder
-
Returns the geometry pattern feature
License requirements: None.
- PatternFeatureBuilder - Interface in nxopen.features
-
- PatternFeatureBuilder.ExpressionTransferOptions - Class in nxopen.features
-
the Expression transfer options.
- PatternFeatureBuilder.OutputOptions - Class in nxopen.features
-
the Output options.
- PatternFeatureBuilder.PatternMethodOptions - Class in nxopen.features
-
the Pattern method options.
- patternFile() - Method in interface nxopen.cam.OperationDisplayOptionsBuilder
-
Returns the pattern file name
License requirements: None.
- patternFill() - Method in interface nxopen.geometricutilities.PatternDefinition
-
Returns the pattern fill definition.
- PatternFill - Interface in nxopen.geometricutilities
-
the pattern fill definition.
- PatternFill.PatternFillOptions - Class in nxopen.geometricutilities
-
This defines Fill Types
- PatternGeometry - Interface in nxopen.features
-
Represents a pattern geometry feature.
- PatternGeometryBuilder - Interface in nxopen.features
-
This class represents the builder to be used to create Pattern Geometry features.
- PatternIncrementItem - Interface in nxopen.geometricutilities
-
variational for one master expression of the input object(s) being patterned.
- PatternIncrementItem.OperationEnum - Class in nxopen.geometricutilities
-
increment operation option.
- PatternIncrementItemList - Interface in nxopen.geometricutilities
-
Represents a list of objects.
- patternIncrementsBuilder() - Method in interface nxopen.geometricutilities.PatternDefinition
-
Returns the pattern increments definition.
- PatternIncrementsBuilder - Interface in nxopen.geometricutilities
-
pattern increments builder .
- PatternIncrementsList - Interface in nxopen.geometricutilities
-
- PatternInstance - Interface in nxopen.assemblies
-
Represents the pattern instance object.
- PatternInstance.IndicesData - Class in nxopen.assemblies
-
- PatternInstanceEditBuilder - Interface in nxopen.geometricutilities
-
- patternLimitsBy() - Method in interface nxopen.features.PointSetBuilder
-
Returns the pattern limits definition setting.
- patternLimitsEndingUValue() - Method in interface nxopen.features.PointSetBuilder
-
Returns the ending u value of the pattern.
- patternLimitsEndingVValue() - Method in interface nxopen.features.PointSetBuilder
-
Returns the ending v value of the pattern.
- patternLimitsEndPoint() - Method in interface nxopen.features.PointSetBuilder
-
Returns the ending diagonal point of the pattern.
- patternLimitsStartingUValue() - Method in interface nxopen.features.PointSetBuilder
-
Returns the starting u value of the pattern.
- patternLimitsStartingVValue() - Method in interface nxopen.features.PointSetBuilder
-
Returns the starting v value of the pattern.
- patternLimitsStartPoint() - Method in interface nxopen.features.PointSetBuilder
-
Returns the starting diagonal point of the pattern.
- PatternMaster - Interface in nxopen.assemblies
-
Represents the pattern master object.
- PatternMember - Interface in nxopen.assemblies
-
Represents the pattern member object.
- patternMethod() - Method in interface nxopen.features.PatternFeatureBuilder
-
Returns the Pattern method
License requirements: None.
- patternOrientation() - Method in interface nxopen.geometricutilities.PatternDefinition
-
Returns the pattern orientation definition.
- PatternOrientation - Interface in nxopen.geometricutilities
-
the pattern orientation definition.
- PatternOrientation.Enum - Class in nxopen.geometricutilities
-
pattern orientation options for all pattern types.
- PatternOrientation.ProjDirEnum - Class in nxopen.geometricutilities
-
pattern follow face project direction options available.
- patternPath() - Method in interface nxopen.weld.EasyPatternBuilder
-
Returns the pattern path.
- PatternReferencePointServiceBuilder - Interface in nxopen.geometricutilities
-
Pattern Reference Point is a service which enables the employing client to compute the reference point for pattern instance locations.
- patternRepeatFactor() - Method in interface nxopen.display.Image
-
Returns the pattern repeat factor - the number of times the image repeats; non integer patternRepeatFactor numbers result in partial repeats.
- patternRepeatFactor() - Method in interface nxopen.display.Wall
-
- patternService() - Method in interface nxopen.assemblies.ComponentPatternBuilder
-
- patternService() - Method in interface nxopen.features.MirrorBuilder
-
- patternService() - Method in interface nxopen.features.PatternFeatureBuilder
-
Returns the Pattern definition service
License requirements: None.
- patternService() - Method in interface nxopen.features.PatternGeometryBuilder
-
Returns the Pattern Defintion service.
- patternService() - Method in interface nxopen.SketchPatternBuilder
-
Returns the pattern service
License requirements: None.
- patternSketch() - Method in interface nxopen.tooling.ReusableObjectPasteBuilder
-
Returns the pattern sketch for reusable object
License requirements: None.
- patternSmooth() - Method in interface nxopen.cam.AreaMillingNonSteepContainment
-
Returns the Pattern Smooth flag
License requirements: None.
- PatternSpacing - Interface in nxopen.geometricutilities
-
defines the various ways pattern instances can be
spaced within the pattern, particularly in the context of the
PatternDefinition class.
- PatternSpacing.SpacingType - Class in nxopen.geometricutilities
-
defines the type of spacing instances can have within a pattern.
- PatternSpacingsList - Interface in nxopen.geometricutilities
-
- PatternSpacingsListItem - Interface in nxopen.geometricutilities
-
- PatternSpacingsListItemList - Interface in nxopen.geometricutilities
-
Represents a list of objects.
- patternType() - Method in interface nxopen.cae.DurabilityLoadPatternBuilder
-
Returns the pattern type.
- patternType() - Method in interface nxopen.cam.GuidedCurveBuilder
-
Returns the Pattern Type
License requirements: None.
- patternType() - Method in interface nxopen.cam.PatternTypeBuilder
-
Returns the pattern type used for common block
License requirements: None.
- patternType() - Method in interface nxopen.geometricutilities.PatternDefinition
-
Returns the pattern type
License requirements: None.
- PatternTypeBuilder - Interface in nxopen.cam
-
Represents a Guided Curve pattern type builder
This is an abstract class and cannot be instantiated.
- PatternTypeBuilder.Option - Class in nxopen.cam
-
Enum of pattern type
- patternXOffset() - Method in interface nxopen.cam.OperationDisplayOptionsBuilder
-
Returns the pattern X offset
License requirements: None.
- patternYOffset() - Method in interface nxopen.cam.OperationDisplayOptionsBuilder
-
Returns the pattern Y offset
License requirements: None.
- patternZOffset() - Method in interface nxopen.cam.OperationDisplayOptionsBuilder
-
Returns the pattern Z offset
License requirements: None.
- PAUSE - Static variable in class nxopen.cae.Post.AnimationControl
-
- pause() - Method in interface nxopen.features.FeatureReplayBuilder
-
Pauses feature replay.
- PAUSE - Static variable in class nxopen.mechatronics.GanttOperationBuilder.OperationType
-
Pause operation
- PAUSE - Static variable in class nxopen.mechatronics.GanttOperationBuilder.SimpleOperationType
-
- PAUSE - Static variable in class nxopen.mechatronics.MechatronicsSession.SimulationAction
-
Pause
- pause() - Method in interface nxopen.motion.AnimationControl
-
Animation pause
License requirements: mechanisms ("MECHANISMS")
.
- pause() - Method in interface nxopen.MovieManager
-
Pauses movie recording
License requirements: None.
- pause() - Method in interface nxopen.tooling.UnfoldingSimulationBuilder
-
Pause animation
License requirements: None.
- PAUSE_AFT_PATH - Static variable in class nxopen.uf.UFCamPref.CamPref
-
- pauseAfterDisplayFlag() - Method in interface nxopen.cam.OperationDisplayOptionsBuilder
-
Returns the pause after display flag
License requirements: None.
- pauseAftPath - Variable in class nxopen.uf.UFCam.Preferences
-
- pauseDuration() - Method in interface nxopen.preferences.SessionUserInterfaceUI
-
Returns the pause duration
License requirements: None.
- pauseOnFirstGougeOrCollision() - Method in interface nxopen.cam.GougeCheckBuilder
-
Returns the pause on first gouge or collision.
- pauseOnGouge() - Method in interface nxopen.cam.CutDepthChecker
-
Returns the indicator for pausing on gouge
License requirements: None.
- PAVER - Static variable in class nxopen.cae.ShipMeshAutomationBuilder.MeshingMethodType
-
Paver
- PAW - Static variable in class nxopen.weld.PlugSlotBuilder.ArcProcessEnum
-
- PAX_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- PAX_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- paxFileName() - Method in interface nxopen.diagramming.SheetBuilder
-
Returns the path name of the PAX file to which the template will be written to.
- paxFileName() - Method in interface nxopen.drawings.MarkAsTemplateBuilder
-
Returns the PAX file to be updated or created if it does not exist.
- PBAR - Static variable in class nxopen.cae.ModelUpdateDesignVariablesRapidCreateBuilder.PhysicalTypesEnum
-
- PBARL - Static variable in class nxopen.cae.ModelUpdateDesignVariablesRapidCreateBuilder.PhysicalTypesEnum
-
- PBEAM - Static variable in class nxopen.cae.ModelUpdateDesignVariablesRapidCreateBuilder.PhysicalTypesEnum
-
- PBEAML - Static variable in class nxopen.cae.ModelUpdateDesignVariablesRapidCreateBuilder.PhysicalTypesEnum
-
- PBUSH - Static variable in class nxopen.cae.ModelUpdateDesignVariablesRapidCreateBuilder.PhysicalTypesEnum
-
- pcfFileName() - Method in interface nxopen.mechanicalrouting.PipingComponentFileBuilder
-
Returns the pcf file name.
- PCG_SOLVER - Static variable in class nxopen.uf.UFConstants
-
- pclientdata - Variable in class nxopen.uf.UFModlUi.ShapePatternCreateDialogData
-
- pcomp - Variable in class nxopen.sim.KinematicConfigurator.FindAxisData
-
The parent component of the axis
- PCS - Static variable in class nxopen.cam.InspectionAnalyzeOutputBuilder.ReportingCsysType
-
Active PCS
- PCS - Static variable in class nxopen.cam.InspectionMethodBuilder.ToleranceDegreeOfFreedomCsysMode
-
PCS - Part Coordinate System
- pcsName() - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
Returns the pcs name
License requirements: None.
- pcsName() - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder
-
Returns the part coordinate system name
License requirements: None.
- pcsName() - Method in interface nxopen.cam.InspectionMeasDataBuilder
-
Returns the name of the PCS to use when transforming data being loaded
License requirements: None.
- pd() - Method in interface nxopen.UFSession
-
- PDAMP - Static variable in class nxopen.cae.ModelUpdateDesignVariablesRapidCreateBuilder.PhysicalTypesEnum
-
- PDF - Static variable in class nxopen.cam.InspectionAnalyzeOutputBuilder.OutputFormatType
-
PDF
- PDF - Static variable in class nxopen.cam.InspectionGraphicalReportOutputBuilder.OutputFormatType
-
- PDF - Static variable in class nxopen.cam.WorkInstructionOutputBuilder.OutputFormatType
-
- PDF_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- PDF_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- PDF_HIDDEN_TEXT_REASON - Static variable in class nxopen.uf.UFCgm.ExportReason
-
- PDF_REASON - Static variable in class nxopen.uf.UFCgm.ExportReason
-
- PDIE_WIZARD - Static variable in class nxopen.tooling.ToolingApplication
-
Progressive Die Wizard
- pdimodeltype - Variable in class nxopen.uf.UFUgmgr.PartFileObject
-
- pdm() - Method in interface nxopen.preferences.SessionPreferences
-
Returns object for doing Pdm preference settings applicable to entire session .
- pdmBased - Variable in class nxopen.NXObject.AttributeInformation
-
The attribute is PDM-based
- PdmFile - Interface in nxopen.pdm
-
Contains methods for accessing PDM file data.
- PdmNavigatorNode - Interface in nxopen.pdm
-
Represents a PdmNavigatorNode .
- pdmpart() - Method in interface nxopen.BasePart
-
Returns the instance of the PDM.PdmPart class
Created in NX3.0.0
- PdmPart - Interface in nxopen.pdm
-
This class serves as a gateway to part-specific tools for NX Manager mode.
- PdmPart.CheckinInput - Class in nxopen.pdm
-
Reservation check-in input struct
- PdmPart.CheckoutInput - Class in nxopen.pdm
-
Reservation check-out input struct
- pdmpartManager() - Method in interface nxopen.PartCollection
-
The
PartManager
that manages creation of parts in NX Manager mode
Created in NX3.0.0
- PdmSearch - Interface in nxopen.pdm
-
Represents search query .
- PdmSearchManager - Interface in nxopen.pdm
-
- pdmSearchManager() - Method in interface nxopen.Session
-
Returns the
PdmSearchManager
instance belonging to this session
Created in NX3.0.0
- PdmSession - Interface in nxopen.pdm
-
Represents the NX Manager session
To obtain an instance of this class, refer to
Session
Created in NX7.5.0
- pdmSession() - Method in interface nxopen.Session
-
Returns the
PdmSession
belonging to this session
Created in NX7.5.0
- PdmSession.SsoSettingsData - Class in nxopen.pdm
-
- PdmSession.TcserverSettingsData - Class in nxopen.pdm
-
- PdmSoaqueryNxmgrfielddatatype - Class in nxopen.pdm
-
NX Manager search field data type
- pdParam - Variable in class nxopen.uf.UFSf.EdgeEvaluateClosestPointData
-
- pdvalue - Variable in class nxopen.cae.ThicknessBuilder.NodeThicknessData
-
Average thickness at node
- pdVolume - Variable in class nxopen.uf.UFSf.BodyAskVolumeAndCentroidData
-
- PDW - Static variable in class nxopen.tooling.DieBaseBuilder.DieBaseTypeOpt
-
progressive die type
- PE - Static variable in class nxopen.ame.AmeElectricalConnectionPotentialType
-
- PEAK - Static variable in class nxopen.cae.FemSignalProcessingSignalAttributes.SpectrumScalings
-
Peak
- PEAK - Static variable in class nxopen.cae.SignalProcessingPlotData.ScalingType
-
Peak
- PEAK - Static variable in class nxopen.cae.SimLoadRecipeFunctionAttributes.ScalingType
-
Peak
- PEAK - Static variable in class nxopen.features.BridgeCurveBuilder.MinRadiusTypes
-
Deprecated.
peak
- PEAK - Static variable in class nxopen.features.BridgeCurveBuilderEx.RadiusConstraintMethods
-
Peak radius
- PEAK - Static variable in class nxopen.features.StyledBlendBuilder.StyledBlendRadiusConstraintType
-
Peak radius constraint
- PEAK - Static variable in class nxopen.geometricanalysis.CurveAnalysisDisplay.ShowFlagType
-
Deprecated.
show peak
- peak - Variable in class nxopen.uf.UFStudio.StybldCurveTrans
-
- peak - Variable in class nxopen.uf.UFStudio.StybldShapeTrans
-
- PEAK_POINT - Static variable in class nxopen.features.BridgeCurveBuilder.ShapeControlTypes
-
Deprecated.
peak point conditions
- peakValleyTolerance() - Method in interface nxopen.cae.DurabilityDamageEvaluationBuilder
-
Returns the peak valley tolerance
License requirements: None.
- peakValleyTolerance() - Method in interface nxopen.cae.DurabilityDataControlBuilder
-
Returns the peak valley tolerance.
- PeakValueEvaluationSetting - Interface in nxopen.cae.responsesimulation
-
Represents the parameters setting of peak value evaluation.
- PeakValueEvaluationSettingBuilder - Interface in nxopen.cae.responsesimulation
-
- pedalPlaneAngle() - Method in interface nxopen.features.vehicledesign.ManikinBuilder
-
Returns the pedal plane angle
License requirements: None.
- pedalReferencePoint() - Method in interface nxopen.features.vehicledesign.BaseDataDriverBuilder
-
Returns the driver pedal reference point.
- pedalReferencePointActive() - Method in interface nxopen.features.vehicledesign.BaseDataDriverBuilder
-
Returns the driver pedal reference point's activeness.
- PedestrianProtection - Interface in nxopen.features.vehicledesign
-
Represents a pedestrian protection feature
To create or edit an instance of this class, use
PedestrianProtectionBuilder
Created in NX6.0.0
- PedestrianProtectionBuilder - Interface in nxopen.features.vehicledesign
-
- PedestrianProtectionBuilder.Font - Class in nxopen.features.vehicledesign
-
Settings for font to create the various output with
- PedestrianProtectionBuilder.InternalBumperType - Class in nxopen.features.vehicledesign
-
Settings for the type of pedestrian protection internal bumper line method to use in the study
- PedestrianProtectionBuilder.StandardType - Class in nxopen.features.vehicledesign
-
Settings for the type of pedestrian protection standard to use in the study
- PedestrianProtectionBuilder.TransformMethods - Class in nxopen.features.vehicledesign
-
Settings for the transform method of pedestrian protection active hood system
- PedestrianProtectionBuilder.Types - Class in nxopen.features.vehicledesign
-
Settings for the type of pedestrian protection impact study
- PedestrianProtectionBuilder.Wad - Class in nxopen.features.vehicledesign
-
Settings for the start, end and boundary wrap around distance line to create
- PedestrianProtectionBuilder.Width - Class in nxopen.features.vehicledesign
-
Settings for width to create the various output with
- PEENING - Static variable in class nxopen.annotations.FinishMethod
-
Specifies peening finish
- PEENING - Static variable in class nxopen.annotations.LineWeldDataBuilder.FinishSymbolType
-
- PELAS - Static variable in class nxopen.cae.ModelUpdateDesignVariablesRapidCreateBuilder.PhysicalTypesEnum
-
- pendIncomplete - Variable in class nxopen.BasePart.IncompleteStatus
-
Part has components pending
- PENDING - Static variable in class nxopen.validate.OverrideBuilder.DecisionActions
-
- PENDING_CONVERTED_MC - Static variable in class nxopen.positioning.Constraint.SolverStatus
-
The constraint has been converted from a mating condition and has not solved since conversion
- PendingComponentsManager - Interface in nxopen.pdm
-
This class is used for managing a part's pending components, that
is, those that have been added within Teamcenter but are not yet
present in NX.
- PendingComponentsManager.AddComponentData - Class in nxopen.pdm
-
- pendulumFrequency(double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the frequency of pendulum motion.
- pendulumPeriod(double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the period of pendulum motion.
- PendulumPlacementBuilder - Interface in nxopen.features.vehicledesign
-
This builder allows you to define the pendulum placement information for bumper pendulum features in vehicle design.
- PendulumPlacementBuilder.LocationType - Class in nxopen.features.vehicledesign
-
This enum represents the pendulum placement location options.
- PendulumPlacementBuilder.PendulumProfileType - Class in nxopen.features.vehicledesign
-
This enum represents the pendulum placement profile options.
- PendulumPlacementBuilder.PositionMethodType - Class in nxopen.features.vehicledesign
-
This enum represents the pendulum placement method options.
- PendulumPlacementBuilder.SideType - Class in nxopen.features.vehicledesign
-
This enum represents the pendulum placement side options.
- pendulumProfile() - Method in interface nxopen.features.vehicledesign.PendulumPlacementBuilder
-
Returns the pendulum profile of this pendulum.
- PENETRATED - Static variable in class nxopen.features.shipdesign.PenetrationUtils.Referencetype
-
- PENETRATING - Static variable in class nxopen.features.shipdesign.PenetrationUtils.Referencetype
-
- PENETRATING_OBJECT - Static variable in class nxopen.features.shipdesign.PenetrationRequest.PenetrationType
-
- PENETRATING_POINT - Static variable in class nxopen.features.shipdesign.PenetrationRequest.PenetrationType
-
- PENETRATION_ATTACH_OUT_OF_DATE - Static variable in class nxopen.features.shipdesign.PenetrationUtils.RequestState
-
- PenetrationAssociationBuilder - Interface in nxopen.features.shipdesign
-
- PenetrationAttachment - Interface in nxopen.features.shipdesign
-
Represents the Penetration Attachment object.
- PenetrationCutoutBuilder - Interface in nxopen.features.shipdesign
-
- penetrationDepth - Variable in class nxopen.uf.UFMotion.ContactParameters
-
- penetrationDepth() - Method in interface nxopen.weld.WeldGrooveBuilder
-
Returns the penetration depth
License requirements: ugweld ("UG WELD")
.
- penetrationDepthExpression() - Method in interface nxopen.motion.BodyContactAdams
-
Returns the penetration depth expression
License requirements: None.
- penetrationDepthExpression() - Method in interface nxopen.motion.BodyContactRecurdyn
-
Returns the penetration depth expression
License requirements: None.
- penetrationDepthExpression() - Method in interface nxopen.motion.CurveContactAdams
-
Returns the penetration depth expression
License requirements: None.
- penetrationDepthExpression() - Method in interface nxopen.motion.CurveContactRecurdyn
-
Returns the penetration depth expression
License requirements: None.
- PenetrationFolder - Interface in nxopen.features.shipdesign
-
Represents the Penetration Folder object.
- PenetrationList - Interface in nxopen.features.shipdesign
-
Represents the Penetration List object.
- PenetrationManager - Interface in nxopen.features.shipdesign
-
Contains the collection objects for creating and iterating over Penetration Request Properties objects.
- penetrationManager() - Method in interface nxopen.Part
-
Returns the PenetrationManager for this part .
- PenetrationRequest - Interface in nxopen.features.shipdesign
-
Represents the Penetration Request object.
- PenetrationRequest.CompensationType - Class in nxopen.features.shipdesign
-
Represents the Compensation type
- PenetrationRequest.CoutoutType - Class in nxopen.features.shipdesign
-
Represents the Coutout type
- PenetrationRequest.DirectionType - Class in nxopen.features.shipdesign
-
Represents the Direction type
- PenetrationRequest.PenetrationType - Class in nxopen.features.shipdesign
-
Represents the penetration type
- PenetrationRequest.RequestType - Class in nxopen.features.shipdesign
-
Represents the request type
- PenetrationRequestBuilder - Interface in nxopen.features.shipdesign
-
- PenetrationRequestBuilder.RequestDialogType - Class in nxopen.features.shipdesign
-
Represents the dialog type
- penetrationRequestCollection() - Method in interface nxopen.features.shipdesign.PenetrationManager
-
Returns the PenetrationRequestCollection instance .
- PenetrationRequestCollection - Interface in nxopen.features.shipdesign
-
- PenetrationRequestForCutoutBuilder - Interface in nxopen.features.shipdesign
-
- PenetrationReviewRequestBuilder - Interface in nxopen.features.shipdesign
-
- PenetrationSite - Interface in nxopen.features.shipdesign
-
Represents the Penetration Site object.
- penetrationType() - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder
-
Returns the penetration type
License requirements: None.
- penetrationUtils() - Method in interface nxopen.features.shipdesign.PenetrationManager
-
Returns the PenetrationUtils instance .
- PenetrationUtils - Interface in nxopen.features.shipdesign
-
Contains various penetration utility methods
To obtain an instance of this class, refer to
PenetrationManager
Created in NX8.0.0
- PenetrationUtils.Referencetype - Class in nxopen.features.shipdesign
-
Represents the reference type
- PenetrationUtils.RequestState - Class in nxopen.features.shipdesign
-
Representes the request state
- PenetrationUtils.Verify_penetrationsData - Class in nxopen.features.shipdesign
-
This class holds the data returned from #verifyPenetrations
- penStatus - Variable in class nxopen.uf.UFDrf.StrokeInfo
-
- PENTAGON - Static variable in class nxopen.cam.TurnToolBuilder.InsertShapes
-
Insert shape: Pentagon
- PER_COPY - Static variable in class nxopen.cae.ElementExtrudeBuilder.DistanceType
-
per copy distance
- PER_COPY - Static variable in class nxopen.cae.ElementRevolveBuilder.AngleType
-
angle per copy
- PER_COPY - Static variable in class nxopen.cae.ElementRotateBuilder.DistanceType
-
distance specified is for each copy
- PER_COPY - Static variable in class nxopen.cae.ElementTranslateBuilder.DistanceType
-
distance specified is for each copy
- PER_COPY - Static variable in class nxopen.cae.NodeRotateBuilder.DistanceType
-
per copy
- PER_COPY - Static variable in class nxopen.cae.NodeTranslateBuilder.DistanceType
-
per copy
- PER_DATA_SOURCE - Static variable in class nxopen.cae.SimLoadRecipeTypes.LoadConditionHandling
-
Treat each source as a load condition
- PER_FEATURE - Static variable in class nxopen.cam.FeatureProcessBuilder.FeatureGroupingType
-
Create a feature group per feature
- PER_MINUTE - Static variable in class nxopen.cam.BoundaryMemberSetPlanarMill.FeedUnitTypes
-
use per minute as the feed rate unit
- PER_MINUTE - Static variable in class nxopen.cam.BoundaryMillingMemberSet.FeedUnitTypes
-
use per minute as the feed rate unit
- PER_MINUTE - Static variable in class nxopen.cam.BoundarySetPlanarMill.FeedUnitTypes
-
use per minute as the feed rate unit
- PER_MINUTE - Static variable in class nxopen.cam.BoundaryTurnSet.FeedUnitTypes
-
use per minute as the feed rate unit
- PER_MINUTE - Static variable in class nxopen.cam.CAMObject.FeedRateUnit
-
use per minute as the feed rate unit
- PER_MINUTE - Static variable in class nxopen.cam.CamOperationFeedUnitType
-
- PER_MINUTE - Static variable in class nxopen.cam.CamPathFeedUnitType
-
- PER_MINUTE - Static variable in class nxopen.cam.FeedRateUnit
-
use per minute as the feed rate unit
- PER_MINUTE - Static variable in class nxopen.cam.ToolAxisChange.MethodTypes
-
Per Minute
- PER_OPERATION - Static variable in class nxopen.cam.Preferences.IpwDmrColoringTypes
-
Per Operation
- PER_PART - Static variable in class nxopen.JtCreator.FileStructure
-
PER_PART
- PER_REVERSAL - Static variable in class nxopen.cam.RoughTurningBuilder.CleanupTypes
-
Cleanup mode: Per reversal
- PER_REVOLUTION - Static variable in class nxopen.cam.BoundaryMemberSetPlanarMill.FeedUnitTypes
-
use per revolution as the feed rate unit
- PER_REVOLUTION - Static variable in class nxopen.cam.BoundaryMillingMemberSet.FeedUnitTypes
-
use per revolution as the feed rate unit
- PER_REVOLUTION - Static variable in class nxopen.cam.BoundarySetPlanarMill.FeedUnitTypes
-
use per revolution as the feed rate unit
- PER_REVOLUTION - Static variable in class nxopen.cam.BoundaryTurnSet.FeedUnitTypes
-
use per revolution as the feed rate unit
- PER_REVOLUTION - Static variable in class nxopen.cam.CAMObject.FeedRateUnit
-
use per revolution as the feed rate unit
- PER_REVOLUTION - Static variable in class nxopen.cam.CamOperationFeedUnitType
-
- PER_REVOLUTION - Static variable in class nxopen.cam.CamPathFeedUnitType
-
- PER_REVOLUTION - Static variable in class nxopen.cam.FeedRateUnit
-
use per revolution as the feed rate unit
- PER_STEP - Static variable in class nxopen.cam.ToolAxisChange.MethodTypes
-
Per Step
- PER_TOOL - Static variable in class nxopen.cam.Preferences.IpwDmrColoringTypes
-
Per Tool
- PERCENT - Static variable in class nxopen.annotations.TableCellStyleBuilder.CellFormatTypes
-
Percent
- PERCENT - Static variable in class nxopen.annotations.TableCellStyleBuilder.FormatType
-
Deprecated.
- PERCENT - Static variable in class nxopen.cae.optimization.TBSTopologyControllerOptimizationParameters.VolumeDefinitionMethod
-
Specifying the volume in percentage
- PERCENT - Static variable in class nxopen.cam.ArcOutputTypeCiBuilder.SplineFitToleranceTypes
-
% tolerance
- PERCENT - Static variable in class nxopen.cam.BoundaryTurnVariableStock.PositionType
-
- PERCENT - Static variable in class nxopen.cam.DmCmBuilder.ExtDisType
-
Tool Diameter
- PERCENT - Static variable in class nxopen.cam.FeedsOptimizationData.FeedRateRangeType
-
Percent
- PERCENT - Static variable in class nxopen.cam.ReliefCut.DepthUnits
-
Percent
- PERCENT - Static variable in class nxopen.cam.ReliefCut.DistanceUnits
-
Percent
- PERCENT - Static variable in class nxopen.cam.ReliefPlunge.UnitTypes
-
Relief plunge Unit: %
- PERCENT - Static variable in class nxopen.cam.TurnRoughFinishLocalReturnBuilder.LimitTypes
-
%
- PERCENT - Static variable in class nxopen.cam.TurnRoughFinishTestCut.StopPositionTypes
-
Test Cut Stop Position: Percent of Finish Cut
- PERCENT - Static variable in class nxopen.DatumConstraint.CurveOption
-
Relative distance as percentage
- PERCENT - Static variable in class nxopen.diagramming.DiagrammingSizingpolicy
-
Percent policy
- PERCENT - Static variable in class nxopen.features.DatumAxisBuilder.CurveOption
-
Relative distance as percentage
- PERCENT - Static variable in class nxopen.features.DatumPlaneBuilder.CurveOption
-
Relative distance as percentage.
- percent() - Method in interface nxopen.features.ExtensionBuilder
-
Returns the percent
License requirements: None.
- PERCENT - Static variable in class nxopen.geometricutilities.Extend.ExtendType
-
- PERCENT - Static variable in class nxopen.geometricutilities.SpinePointData.ParameterType
-
Parameter expressed as percent arc length
- percent() - Method in interface nxopen.IPlane
-
Returns the arclenth or the percent value
License requirements: None.
- percent - Variable in class nxopen.pid.EquipmentBuilder.InlineSymbolLocationData
-
- percent - Variable in class nxopen.pid.PipeBuilder.StartTeeLocationData
-
- PERCENT - Static variable in class nxopen.PointCollection.AlongCurveOption
-
Scalar is a relative percentage.
- PERCENT - Static variable in class nxopen.weld.WeldParasetLocation
-
percent arc length
- PERCENT_ARC_LENGTH - Static variable in class nxopen.CurveParameterType
-
- PERCENT_ARC_LENGTH - Static variable in class nxopen.features.AeroFlangeBuilder.PointOption
-
- PERCENT_ARC_LENGTH - Static variable in class nxopen.features.AeroRibBuilder.PointOption
-
- PERCENT_ARC_LENGTH - Static variable in class nxopen.PointCollection.PointOnCurveLocationOption
-
Scalar is a relative percentage arc length.
- PERCENT_DEGRESSION - Static variable in class nxopen.cam.StepoverBuilder.StepoverTypes
-
% Degression
- PERCENT_FLUTE_LENGTH - Static variable in class nxopen.cam.StepoverBuilder.StepoverTypes
-
Percent Flute Length
- PERCENT_LENGTH - Static variable in class nxopen.routing.SplinePathBuilder.SplinePathSlackType
-
The length of the spline is increased by a percentage of the spline length.
- PERCENT_MEAN_VOTE - Static variable in class nxopen.cae.Result.Quantity
-
- PERCENT_OF_MEASURED - Static variable in class nxopen.features.TrimExtendBuilder.CreationTypes
-
Percentage of Measured Edges
- PERCENT_PARAMETER - Static variable in class nxopen.PointCollection.PointOnCurveLocationOption
-
Scalar is a relative percentage parameter.
- PERCENT_REMAINING - Static variable in class nxopen.cam.StepoverBuilder.StepoverTypes
-
Percent Of Remaining
- PERCENT_THREAD_LENGTH - Static variable in class nxopen.cam.StepoverBuilder.StepoverTypes
-
Percent Thread Length
- PERCENT_TOOL_DIAMETER - Static variable in class nxopen.cam.MaxCutTraverse.Types
-
percent tool diameter
- PERCENT_TOOL_FLAT - Static variable in class nxopen.cam.StepoverBuilder.StepoverTypes
-
% Tool Flat
- PERCENT_WIRE - Static variable in class nxopen.cam.StepoverBuilder.StepoverTypes
-
% Wire
- PERCENTAGE - Static variable in class nxopen.cam.Cycle.CutMode
-
fixed cut distance by percentage of tool diameter
- PERCENTAGE - Static variable in class nxopen.cam.InspectionConstructedFeatureBuilder.ExtractEdgeDistanceType
-
Use a percentage distance from edge
- PERCENTAGE - Static variable in class nxopen.cam.InspectionCurveFeatureBuilder.StartEndModeType
-
Percent
- PERCENTAGE - Static variable in class nxopen.cam.InspectionMethodBuilder.UVModeTypes
-
Percentage
- PERCENTAGE - Static variable in class nxopen.cam.InspectionSurfaceFeatureBuilder.StartEndModeType
-
Percent
- PERCENTAGE - Static variable in class nxopen.cam.RoughFinishTurningBuilder.MinmaxAreaUnits
-
Percentage
- PERCENTAGE - Static variable in class nxopen.cam.RoughFinishTurningBuilder.MinmaxSizeUnits
-
Percentage
- percentage() - Method in interface nxopen.cam.StopPosition
-
Returns the stop at percentage
License requirements: None.
- PERCENTAGE - Static variable in class nxopen.cam.StopPosition.Types
-
Stop At mode: Percentage
- percentage() - Method in interface nxopen.cam.TurnOverlap
-
Returns the overlap percentage
License requirements: None.
- PERCENTAGE - Static variable in class nxopen.cam.TurnOverlap.Types
-
Overlap mode: Percentage
- PERCENTAGE - Static variable in class nxopen.facet.DecimateFacetBodyBuilder.DecimateMethodType
-
Percentage option allows the user to reduce the facet count by overall percentage.
- percentage() - Method in interface nxopen.facet.DecimateFacetBodyBuilder
-
Returns the value indicating percentage by which facet count is to be reduced.
- PERCENTAGE - Static variable in class nxopen.geometricutilities.ReduceSurfaceRadiusBuilder.ReduceValueTypeSpecification
-
- PERCENTAGE - Static variable in class nxopen.motion.PostProcess.EnvelopeToleranceTypes
-
- PERCENTAGE - Static variable in class nxopen.visualreporting.Classifier.RangeMethodOption
-
A percentage range will be used
- PERCENTAGE_OF_MODEL - Static variable in class nxopen.cae.Post.MarkMaximumSize
-
- PERCENTAGE_OF_MODEL - Static variable in class nxopen.cae.Post.StreamlineSize
-
- percentageForce() - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder
-
Returns the percentage of force.
- percentageRealData - Variable in class nxopen.uf.UFModl.RefitFaceData
-
- PERCENTAGES - Static variable in class nxopen.features.PointSetBuilder.PatternLimitsType
-
The pattern limit is defined by surface U and V values.
- percentFeedback() - Method in interface nxopen.cam.ProbeControlParametersBuilder
-
Returns the percent feedback
License requirements: None.
- percentFluteLength() - Method in interface nxopen.cam.StepoverBuilder
-
Returns the percent flute of length
License requirements: None.
- PERCENTILE1 - Static variable in class nxopen.HumanData.StatureType
-
Indicate stature is 1% of population
- PERCENTILE1 - Static variable in class nxopen.HumanData.WeightType
-
Indicate weight is 1% of population
- PERCENTILE5 - Static variable in class nxopen.HumanData.StatureType
-
Indicate stature is 5% of population
- PERCENTILE5 - Static variable in class nxopen.HumanData.WeightType
-
Indicate weight is 5% of population
- PERCENTILE50 - Static variable in class nxopen.HumanData.StatureType
-
Indicate stature is 50% of population
- PERCENTILE50 - Static variable in class nxopen.HumanData.WeightType
-
Indicate weight is 50% of population
- PERCENTILE95 - Static variable in class nxopen.features.vehicledesign.MirrorCertificationBuilder.EyellipsePercentileType
-
Represents 95 Percentile eyellipse will be used for mirror certification
- PERCENTILE95 - Static variable in class nxopen.HumanData.StatureType
-
Indicate stature is 95% of population
- PERCENTILE95 - Static variable in class nxopen.HumanData.WeightType
-
Indicate weight is 95% of population
- PERCENTILE99 - Static variable in class nxopen.features.vehicledesign.MirrorCertificationBuilder.EyellipsePercentileType
-
Represents 99 Percentile eyellipse will be used for mirror certification
- PERCENTILE99 - Static variable in class nxopen.HumanData.StatureType
-
Indicate stature is 99% of population
- PERCENTILE99 - Static variable in class nxopen.HumanData.WeightType
-
Indicate weight is 99% of population
- percentLowerLimit() - Method in interface nxopen.cam.FeedsOptimizationData
-
Returns the percent of lower limit
License requirements: None.
- percentOfDegression() - Method in interface nxopen.cam.StepoverBuilder
-
Returns the Percent of Degression
License requirements: None.
- percentOffset() - Method in interface nxopen.cae.ElementExtrudeBuilder
-
Returns the percent offset
License requirements: None.
- percentOffset() - Method in interface nxopen.cae.ElementProjectBuilder
-
Returns the percent offset
License requirements: None.
- percentOffset() - Method in interface nxopen.cae.NodeProjectBuilder
-
Returns the percent offset
License requirements: None.
- percentOfRemainingBuilder() - Method in interface nxopen.cam.StepoverBuilder
-
Returns the percent of remaining
License requirements: None.
- percentOfTool() - Method in interface nxopen.cam.DisplaySilhouette
-
Returns the percent of tool.The range is 1-100.
- percentOfTool() - Method in interface nxopen.cam.OperationDisplayOptionsBuilder
-
Returns the percent of tool.The range is 1-100.
- percentReduction() - Method in interface nxopen.geometricutilities.ReduceSurfaceRadiusBuilder
-
Returns the value of percentage reduction method
License requirements: None.
- percentSize - Variable in class nxopen.uf.UFModlFeatures.AskEnlargeData
-
- percentThreadLength() - Method in interface nxopen.cam.StepoverBuilder
-
Returns the percent thread length
License requirements: None.
- percentToolFlatBuilder() - Method in interface nxopen.cam.StepoverBuilder
-
Returns the percent tool flat
License requirements: None.
- percentU() - Method in interface nxopen.features.ExtensionBuilder
-
Returns the percent u
License requirements: None.
- percentUpperLimit() - Method in interface nxopen.cam.FeedsOptimizationData
-
Returns the percent of upper limit
License requirements: None.
- percentV() - Method in interface nxopen.features.ExtensionBuilder
-
Returns the percent v
License requirements: None.
- percentWireBuilder() - Method in interface nxopen.cam.StepoverBuilder
-
Returns the % wire (inheritable tool dependent)
License requirements: None.
- percentx - Variable in class nxopen.diagramming.LeaderLineBuilder.TerminatorData
-
- percenty - Variable in class nxopen.diagramming.LeaderLineBuilder.TerminatorData
-
- PERFECT_MMC_COAXIALITY - Static variable in class nxopen.uf.UFGdt.ModifierTypes
-
- PERFECT_MMC_ORIENTATION - Static variable in class nxopen.uf.UFGdt.ModifierTypes
-
- PERFECT_MMC_SYM_FEAT_LOC - Static variable in class nxopen.uf.UFGdt.ModifierTypes
-
- perform(NXObject[]) - Method in interface nxopen.cae.qualityaudit.Action
-
Performs the action on the given object list.
- perform() - Method in interface nxopen.routing.RouteLogicalAssociation
-
Performs the specified action (suppress or unsuppress) on the
RouteLogicalAssociation Object
License requirements: routing_harness ("Routing Harness")
.
- performActions(Action[], NXObject[]) - Method in interface nxopen.cae.qualityaudit.Manager
-
This method performs checks on the selected objects.
- performAnalysis(ClearanceSet.ReanalyzeOutOfDateExcludedPairs) - Method in interface nxopen.assemblies.ClearanceSet
-
Perform an analysis on this clearance set with option to specify whether
out-of-date excluded pairs will be reanalyzed.
- performAnalysis() - Method in interface nxopen.weld.ConnectedFaceFinderBuilder
-
Process the selected retained welds and populate the list with appropriate faces to reconnect the weld too.
- PERFORMANCE - Static variable in class nxopen.sim.SimDebugBuilder.TraceType
-
Trace Performance
- PERFORMANCE_DISPLAY_DATA - Static variable in class nxopen.sim.SimDebugBuilder.UiType
-
Performance Display Data
- PERFORMANCE_DISPLAY_DETAIL - Static variable in class nxopen.sim.SimDebugBuilder.UiType
-
Performance Display Detail
- PERFORMANCE_DISPLAY_TIME - Static variable in class nxopen.sim.SimDebugBuilder.UiType
-
Performance Display Time
- PERFORMANCE_INDENT_TIME - Static variable in class nxopen.sim.SimDebugBuilder.UiType
-
Performance Indent Time
- performanceVisualization() - Method in interface nxopen.preferences.PartPreferences
-
Returns object for doing Visualization performance preference
settings for displayed part.
- performanceVisualization() - Method in interface nxopen.preferences.SessionPreferences
-
Returns object for doing Visualization Performance preferences settings applicable to entire session .
- performApply() - Method in interface nxopen.blockstyler.BlockDialog
-
Performs an Apply and restarts the dialog.
- performCheck() - Method in interface nxopen.cam.CutDepthChecker
-
The action to perform the check
License requirements: None.
- performCheck() - Method in interface nxopen.geometricanalysis.SimpleInterference
-
Perform Interference Check.
- performClearanceAnalysis() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
Perform clearance analysis between the tire envelope and the clearance objects.
- performClone(UFClone.NamingFailures) - Method in interface nxopen.uf.UFClone
-
- performDisplayAndHighlight() - Method in interface nxopen.tooling.MWDefineSheetsBuilder
-
Perform display and highlight for the selected region when there is only one selected
License requirements: None.
- performDisplayForTypeChange() - Method in interface nxopen.tooling.MWDefineSheetsBuilder
-
Perform the display operations when the type of defining Cavity and Core is changed.
- performExtendedIntersectionCalculation() - Method in interface nxopen.features.TrimCurve2Builder
-
Returns the perform extended intersection calculation option
License requirements: None.
- performFidelityCheckOnImport() - Method in interface nxopen.preferences.SessionNXGateway
-
Returns the perform fidelity check on import flag for I-DEAS
License requirements: None.
- performFind(FindInCollaborativeDesign.ObjectType, FindInCollaborativeDesign.SearchType, String) - Method in interface nxopen.assemblies.FindInCollaborativeDesign
-
Generate the search results according to the search text.
- performFind(Partition, FindInCollaborativeDesign.ObjectType, FindInCollaborativeDesign.SearchType, String) - Method in interface nxopen.assemblies.FindInCollaborativeDesign
-
Generate the search results according to the search text, searching only
within the partition.
- performFind(FindInCollaborativeDesign.ObjectType, FindInCollaborativeDesign.SearchType, String[], String[]) - Method in interface nxopen.assemblies.FindInCollaborativeDesign
-
Generate the search results according to the search criteria of advance search.
- performGougeCheck(GougeCheckResults.Option) - Method in interface nxopen.cam.Operation
-
Perform Gouge Checking
License requirements: cam_base ("CAM BASE")
.
- performLogicalAssociation(RouteLogicalAssociation[]) - Method in interface nxopen.routing.RouteLogicalAssociationCollection
-
- performModelPropertiesCalculation() - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
Perform model properties calculation if the calculation has not been performed before.
- performOrthotropicAnalysis() - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder
-
Returns the perform orthropic analysis.
- performOrthotropicAnalysis() - Method in interface nxopen.cae.DurabilityEventStrengthSettingsBuilder
-
Returns the perform orthotropic analysis.
- performSearchButton() - Method in interface nxopen.tooldesigner.AssociateDatumsUnitDesignsBuilder
-
Represents search button
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- performSearchButton() - Method in interface nxopen.tooldesigner.SelectFixtureUnitsBuilder
-
Perform Search Button
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- performSharpCornersCalculation() - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
Perform the sharp corners calculation if the calculation has not been performed before.
- performSimulation(MechatronicsSession.SimulationAction) - Method in interface nxopen.mechatronics.MechatronicsSession
-
Control the Simulation.
- performSyncTasks() - Method in interface nxopen.tooling.MWPartingManagerBuilder
-
Perform the syncronization tasks when entering the Parting Manager environment.
- performSyncTasksOnExit() - Method in interface nxopen.tooling.MWPartingManagerBuilder
-
Perform the syncronization tasks when exiting the Parting Manager environment.
- perimeter() - Method in interface nxopen.ame.LoadLineDesignerBuilder
-
Returns the perimeter
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- PERIMETER - Static variable in class nxopen.MeasureFaces.ActiveValue
-
- perimeter() - Method in interface nxopen.MeasureFaces
-
Returns the value for perimeter of the measurement
License requirements: None.
- PERIMETER_DIM - Static variable in class nxopen.Sketch.ConstraintType
-
- PERIMETER_DIM - Static variable in class nxopen.uf.UFSket.ConType
-
- perimeterLaw() - Method in interface nxopen.geometricutilities.ScalingMethodBuilder
-
Returns the perimeter law.
- PERIOD - Static variable in class nxopen.ame.NamingRuleSettingsBuilder.Sources
-
- PERIOD - Static variable in class nxopen.annotations.DecimalPointCharacter
-
Specifies period decimal point character
- period(double) - Method in interface nxopen.EngineeringFunction
-
Calculate the period from frequency.
- PERIOD - Static variable in class nxopen.preferences.DecimalPointCharacter
-
"."
- periodic() - Method in interface nxopen.Spline
-
Returns the periodicity of the spline
License requirements: None.
- periodic - Variable in class nxopen.uf.UFSo.SplineData
-
- periodicity - Variable in class nxopen.uf.UFCurve.AskParameterizationData
-
- periodicity - Variable in class nxopen.uf.UFCurve.AskSplineThruPtsData
-
- peripheralFlag - Variable in class nxopen.uf.UFDrf.WeldSymbols
-
- PERIPHERY - Static variable in class nxopen.ame.MemorySectionType
-
- PERIPHERY_INPUT - Static variable in class nxopen.ame.MemorySectionType
-
- PERIPHERY_OUTPUT - Static variable in class nxopen.ame.MemorySectionType
-
- PERMANENT - Static variable in class nxopen.Persistence
-
- PERMANENT - Static variable in class nxopen.routing.ComponentName
-
Component has been renamed by the user.
- PERMANENT - Static variable in class nxopen.validate.OverrideBuilder.RequestTypes
-
- PERMANENT_BOUNDARY - Static variable in class nxopen.cam.ToolPathEditorBuilder.TrimGeometryType
-
- permanentBoundary() - Method in interface nxopen.cam.ToolPathEditorBuilder
-
Returns the permanent boundary
License requirements: None.
- PERMAS_POST - Static variable in class nxopen.cae.Result.Filetype
-
- PERMEABILITY - Static variable in class nxopen.cae.Result.Quantity
-
- perpcrvData - Variable in class nxopen.uf.UFCurve.SectionAskPerpcrvData
-
- PERPEN_CON - Static variable in class nxopen.uf.UFModl.DfoConstraintType
-
- PERPENDICULAR - Static variable in class nxopen.annotations.ChamferLeaderPlacement
-
Specifies leader perpendicular to the chamfer
- PERPENDICULAR - Static variable in class nxopen.annotations.CuttingPlaneSymbolBuilder.TextPlaneRelativeArrow
-
The Plane of the PMI Cutting Plane Symbol Text is Perpendicular to its Arrow.
- PERPENDICULAR - Static variable in class nxopen.annotations.DimensionMeasurementBuilder.MeasurementMethod
-
Perpendicular measurement direction
- PERPENDICULAR - Static variable in class nxopen.annotations.DimensionType
-
Perpendicular dimension
- PERPENDICULAR - Static variable in class nxopen.annotations.FeatureControlFrameIndicatorBuilder.FcfIndicatorCharacteristic
-
- PERPENDICULAR - Static variable in class nxopen.annotations.GeometricCharacteristic
-
Specifies perpendicular characteristics
- perpendicular() - Method in interface nxopen.annotations.LeaderData
-
Returns the perpendicular relationship between the first segment and stub
License requirements: None.
- PERPENDICULAR - Static variable in class nxopen.annotations.TextOrientation
-
Specifies dimension text perpendicular to the dimension line
- PERPENDICULAR - Static variable in class nxopen.DatumConstraint.Type
-
- PERPENDICULAR - Static variable in class nxopen.drawings.BrokenViewBuilder.TypeDirection
-
Perpendicular
- PERPENDICULAR - Static variable in class nxopen.features.BridgeCurveBuilder.CurveDirectionTypes
-
Deprecated.
bridge direction takes the direction that is
perpendicular to the tangent direction
of the base curve at the selected point
- PERPENDICULAR - Static variable in class nxopen.features.DatumAxisBuilder.ConstraintType
-
Perpendicular constraint
- PERPENDICULAR - Static variable in class nxopen.features.DatumPlaneBuilder.ConstraintType
-
Perpendicular constraint
- PERPENDICULAR - Static variable in class nxopen.features.GeometricConstraintData.ParameterDirection
-
Perpendicular to curve on face or edge
- PERPENDICULAR - Static variable in class nxopen.features.GlobalShapingBuilder.TargetCurveOrientationType
-
Target curves are perpendicular to the limit curves.
- PERPENDICULAR - Static variable in class nxopen.features.MatchEdgeBuilder.EdgeConstraintType
-
Perpendicular
- PERPENDICULAR - Static variable in class nxopen.features.NSidedSurfaceBuilder.FlowDirectionType
-
perpendicular
- Perpendicular - Interface in nxopen.features
-
Represents a perpendicular feature
To create or edit an instance of this class, use
PerpendicularBuilder
Created in NX6.0.0
- PERPENDICULAR - Static variable in class nxopen.features.SectionSurfaceBuilder.FlowDirectionEnum
-
Deprecated.
flow direction perpendicular to the guide
- PERPENDICULAR - Static variable in class nxopen.features.SectionSurfaceBuilderEx.SpineEndFlowType
-
flow direction perpendicular to the guide
- PERPENDICULAR - Static variable in class nxopen.features.SectionSurfaceBuilderEx.SpineStartFlowType
-
flow direction perpendicular to the guide
- PERPENDICULAR - Static variable in class nxopen.features.subdivision.SubdivisionExtrudeCageBuilder.DirectionType
-
- PERPENDICULAR - Static variable in class nxopen.geometricutilities.BridgeCurveConnectivity.CurveDirectionOptions
-
Perpendicular to section using a reference face
- PERPENDICULAR - Static variable in class nxopen.geometricutilities.FlowDirection.Type
-
Perpendicular
- perpendicular() - Method in interface nxopen.InferredConstraintsBuilder
-
Returns the perpendicular infer-constraint setting.
- PERPENDICULAR - Static variable in class nxopen.mechatronics.SpeedPositionControlDirectiontype
-
perpendicular
- PERPENDICULAR - Static variable in class nxopen.motion.JointDefine.Type
-
This joint type indicates a five degrees of freedom (2R +3T DOF) primitive that allows both
translational and rotational motion of one part with respect to Another.
- PERPENDICULAR - Static variable in class nxopen.PlaneTypes.MethodType
-
Perpendicular to plane method
- PERPENDICULAR - Static variable in class nxopen.positioning.Constraint.Type
-
Two geometries are perpendicular
- PERPENDICULAR - Static variable in class nxopen.PositioningDimension.Subtype
-
Perpendicular dimension
- PERPENDICULAR - Static variable in class nxopen.Sketch.ConstraintType
-
- perpendicular() - Method in interface nxopen.SketchAutoConstrainBuilder
-
Returns the perpendicular
License requirements: None.
- PERPENDICULAR - Static variable in class nxopen.SketchConstraintBuilder.Constraint
-
- PERPENDICULAR - Static variable in class nxopen.tooling.AutoDimensionBuilder.TextOrientationType
-
- PERPENDICULAR - Static variable in class nxopen.tooling.ChannelAdjustBuilder.VectorMethod
-
Reposition the target channels Perpendicular the vector specified.
- PERPENDICULAR - Static variable in class nxopen.uf.UFSket.ConType
-
- PERPENDICULAR_DIM - Static variable in class nxopen.Sketch.ConstraintType
-
- PERPENDICULAR_DIM - Static variable in class nxopen.uf.UFSket.ConType
-
- PERPENDICULAR_LINEAR - Static variable in class nxopen.PlaneTypes.MethodType
-
Perpendicular to plane through linear method
- PERPENDICULAR_POINT - Static variable in class nxopen.PlaneTypes.MethodType
-
Perpendicular to plane though point method
- PERPENDICULAR_TO - Static variable in class nxopen.cam.InspectionConstructedFeatureBuilder.MethodEnumType
-
Creates a feature perpendicular to a feature and through another feature
- PERPENDICULAR_TO_CURVE - Static variable in class nxopen.features.SectionCurveBuilder.PlaneType
-
Set of planes perpendicular to a curve
- PERPENDICULAR_TO_HINGE_LINE - Static variable in class nxopen.drawings.ViewPlacementBuilder.Method
-
Align the view along the hinge line
- PERPENDICULAR_TO_LINE - Static variable in class nxopen.drawings.ViewPlacementBuilder.Method
-
Align the view along some line to another view
- PERPENDICULAR_TO_MOLDING_FACE - Static variable in class nxopen.features.shipdesign.SplitProfilePlateBuilder.SplitDirectionOptionType
-
create plane/face perpendicular to molding face as the split tool
- PERPENDICULAR_TO_OBJECT - Static variable in class nxopen.features.DatumAxisBuilder.CurveOrientations
-
Orientation at perpendicular to object
- PERPENDICULAR_TO_STRING - Static variable in class nxopen.SketchConstraintBuilder.Constraint
-
- PERPENDICULAR_TO_STRING - Static variable in class nxopen.uf.UFSket.ConType
-
- PERPENDICULAR_TO_TIC - Static variable in class nxopen.annotations.FrameBarElementStyleBuilder.LabelTextOrientation
-
Perpendicular To Tic
- PERPENDICULAR_TO_VECTOR - Static variable in class nxopen.features.DatumAxisBuilder.DirectionOrientations
-
Orientation perpendicular to Direction
- PERPENDICULAR_TYPE - Static variable in class nxopen.uf.UFGdt.Characteristic
-
- PerpendicularBuilder - Interface in nxopen.features
-
- PerpendicularDimension - Interface in nxopen.annotations
-
Represents a perpendicular dimension
To create or edit an instance of this class, use
LinearDimensionBuilder
Created in NX4.0.0
- perpendicularEnabled() - Method in interface nxopen.features.FaceRecognitionBuilder
-
Returns a value that indicates whether perpendicular relation recognition is enabled
License requirements: None.
- perpendicularFace() - Method in interface nxopen.geometricutilities.BridgeCurveConnectivity
-
Returns the perpendicular face
License requirements: None.
- perpendicularInitialPosition() - Method in interface nxopen.mechatronics.TransportSurfaceBuilder
-
Returns the initial position in perpendicular direction.
- PERPENDICULARITY - Static variable in class nxopen.annotations.FeatureControlFrameBuilder.FcfCharacteristic
-
perpendicularity
- PERPENDICULARITY - Static variable in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.CharacteristicOptions
-
perpendicularity
- PERPENDICULARITY - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.TolType
-
Perpendicularity
- perpendicularReinforcement() - Method in interface nxopen.routing.DuctReinforcementBuilder
-
Returns the stock settings for perpendicular reinforcements
License requirements: routing_hvac ("Routing HVAC")
.
- PERPENDICULARTO_LOADING - Static variable in class nxopen.features.vehicledesign.WheelCoveringBuilder.SurfacePlaneType
-
The checking surface is perpendicular to the active loading plane
- PERPENDICULARTO_SECTION_PLANE - Static variable in class nxopen.features.RibBuilder.RibTypes
-
Perpendicular to Section Plane
- PERPENDICULARTO_STRUCTURE - Static variable in class nxopen.features.shipdesign.PenetrationRequest.DirectionType
-
- perpendicularVelocity() - Method in interface nxopen.mechatronics.TransportSurfaceBuilder
-
Returns the perpendicular velocity.
- Persistence - Class in nxopen
-
Specifies persistence .
- persistent() - Method in interface nxopen.AttributeTemplatesBuilder
-
Returns the persistent flag.
- persistent() - Method in interface nxopen.positioning.Constraint
-
Returns
the persistent state of the constraint.
- PERSISTENT_FROZEN - Static variable in class nxopen.uf.UFWave.DelayStatus
-
- persistentInterpolator() - Method in interface nxopen.fields.FieldTable
-
Returns
a flag specifying if interpolator is persistent between session
License requirements: None.
- PersistentSettings - Interface in nxopen.pdm
-
Persistently held settings for a Teamcenter user account.
- persistentTag() - Method in interface nxopen.mechatronics.GenericSensorBuilder
-
Returns the Persistent Tag used in the physics object
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- persistentTag() - Method in interface nxopen.mechatronics.LimitSwitchBuilder
-
Returns the Persistent Tag used in the physics object
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- persistentTag() - Method in interface nxopen.mechatronics.RelayBuilder
-
Returns the Persistent Tag used in the physics object
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- PERSONAL_PROTECTIVE_EQUIP - Static variable in class nxopen.HumanPosturePredictionBuilder.GarbType
-
Personal Protective Equip
- PERSPECTIVE - Static variable in class nxopen.display.CameraBuilder.Types
-
Perspective Projection
- perspective() - Method in interface nxopen.drawings.PerspectiveViewStyle
-
Returns the status of perspective
License requirements: None.
- perspective() - Method in interface nxopen.drawings.ViewStyle
-
Returns object for doing View style settings applicable to Perspective .
- perspective() - Method in interface nxopen.drawings.ViewStylePerspectiveBuilder
-
Returns the perspective toggle on the PERSPECTIVE tab of the View Style Dialog
License requirements: None.
- perspectiveDistance() - Method in interface nxopen.display.CameraBuilder
-
Returns the perspective distance
License requirements: None.
- perspectiveDistance() - Method in interface nxopen.drawings.PerspectiveViewStyle
-
Returns the value of perspective distance
License requirements: None.
- perspectiveDistance() - Method in interface nxopen.drawings.ViewStylePerspectiveBuilder
-
Returns the perspective distance data on the PERSPECTIVE tab of the View Style Dialog
License requirements: None.
- PerspectiveOptionsBuilder - Interface in nxopen.display
-
- PerspectiveViewStyle - Interface in nxopen.drawings
-
Represents set of PerspectiveViewStyle applicable to drafting views.
- perturbationFraction() - Method in interface nxopen.cae.optimization.DAOStopCondition
-
Returns the perturbation fraction
License requirements: None.
- PGAP - Static variable in class nxopen.cae.ModelUpdateDesignVariablesRapidCreateBuilder.PhysicalTypesEnum
-
- PGM_OFFSET - Static variable in class nxopen.uf.UFSket.ConType
-
- PHANTOM - Static variable in class nxopen.annotations.EditSymbolDisplayBuilder.FontTypes
-
Phantom Type
- PHANTOM - Static variable in class nxopen.assemblies.ProductOutlineBuilder.LineFont
-
Phantom Line
- PHANTOM - Static variable in class nxopen.cae.ModelDisplayBuilder.FreeEdgeFont
-
Phantom font
- PHANTOM - Static variable in class nxopen.cae.ModelDisplayBuilder.RotationAxisLineFont
-
Phantom font
- PHANTOM - Static variable in class nxopen.cae.ModelDisplayBuilder.StitchedEdgeFont
-
Phantom font
- PHANTOM - Static variable in class nxopen.display.GridBuilder.LineStyleType
-
- PHANTOM - Static variable in class nxopen.DisplayableObject.ObjectFont
-
- PHANTOM - Static variable in class nxopen.drawings.CustomViewSettingsBuilder.Font
-
Phantom
- PHANTOM - Static variable in class nxopen.drawings.DrawingCompareSettingsBuilder.FontType
-
Deprecated.
- PHANTOM - Static variable in class nxopen.drawings.SectionLineStyleBuilder.FontStyle
-
Deprecated.
- PHANTOM - Static variable in class nxopen.features.vehicledesign.PedestrianProtectionBuilder.Font
-
Phantom Font
- PHANTOM - Static variable in class nxopen.fields.DisplayPropertiesBuilder.LineFontEnum
-
Phantom
- PHANTOM - Static variable in class nxopen.LineFontBuilder.LineFontType
-
Phantom line font
- PHANTOM - Static variable in class nxopen.preferences.Font
-
Phantom
- PHANTOM - Static variable in class nxopen.preferences.PartDrafting.FontType
-
Phantom
- PHANTOM - Static variable in class nxopen.preferences.PartModeling.GridKnotLineFontType
-
- PHANTOM - Static variable in class nxopen.preferences.PartObject.LineFontType
-
Phantom
- PHANTOM - Static variable in class nxopen.preferences.SessionModeling.PolylineStyleType
-
- PHANTOM - Static variable in class nxopen.preferences.ViewVisualizationVisual.SmoothEdgeFont
-
- PHANTOM - Static variable in class nxopen.ViewDependentDisplayManager.Font
-
- phase() - Method in interface nxopen.cae.ResultVariable
-
Returns the Phase angle
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- PHASE - Static variable in class nxopen.cae.xyplot.ComplexOption2D
-
Only the phase of the complex data for 2D plot
- PHASE - Static variable in class nxopen.cae.xyplot.ComplexOption2DBarChart
-
Phase of the complex data for 2D bar chart plot
- PHASE - Static variable in class nxopen.cae.xyplot.ComplexOption2DColorContour
-
Phase of the complex data for 2D color contour plot plot
- PHASE - Static variable in class nxopen.cae.xyplot.ComplexOption3D
-
Phase of the complex data for 3D plot
- PHASE - Static variable in class nxopen.fields.DisplayPropertiesBuilder.ComplexScalarType
-
- phase - Variable in class nxopen.mechatronics.CamProfileBuilder.Element
-
segment polynomial coefficient
- PHASE_ANGLE - Static variable in class nxopen.cae.responsesimulation.CSDExcitation.CorrelationType
-
- PHASE_ANGLE - Static variable in class nxopen.cae.Result.Complex
-
- PHASE_IMAGINARY_REAL - Static variable in class nxopen.cae.xyplot.ComplexOption2D
-
Phase angle, imaginary and real of the complex data for 2D plot
- PHASE_MAGNITUDE - Static variable in class nxopen.cae.xyplot.ComplexOption2D
-
Phase angle and Magnitude of complex data for 2D plot
- PHASE_REAL_IMAGINARY - Static variable in class nxopen.cae.xyplot.ComplexOption2D
-
Phase angle, real and imaginary of the complex data for 2D plot
- phaseAngle() - Method in interface nxopen.cae.DeformationParameters
-
Returns the phase angle at which result will be evaluated and used for deformation.
- phaseAngle() - Method in interface nxopen.cae.responsesimulation.FunctionComponentData
-
Returns the phase angle.
- phaseAngle - Variable in class nxopen.cae.Result.DeformationParameters
-
Deprecated.
- phaseAngle - Variable in class nxopen.cae.Result.ResultParameters
-
Deprecated.
- phaseAngle() - Method in interface nxopen.cae.xyplot.GeneralDisplayStyles
-
Returns the phase angle in degree
License requirements: None.
- phaseAngle - Variable in class nxopen.uf.UFMotion.JointMotionInput
-
- phaseAngleExpression() - Method in interface nxopen.motion.DriverOperation
-
Returns the phase angle expression
License requirements: None.
- phaseRangeOption() - Method in interface nxopen.cae.xyplot.GeneralDisplayStyles
-
Returns the phase range option
License requirements: None.
- PhaseRangeOption - Class in nxopen.cae.xyplot
-
Prepresents the phase range option
- phi() - Method in interface nxopen.cae.NodeModifyLocationBuilder
-
Returns the phi
License requirements: None.
- PHONG - Static variable in class nxopen.ModelingViewHighQualityImage.ShadeMethod
-
Provides smoother highlights than Gouraud shading,
but otherwise supports the same level of functionality.
- PHONG - Static variable in class nxopen.uf.UFDisp.ShadeMethod
-
- PHOTO_HORIZON - Static variable in class nxopen.geometricanalysis.ReflectionAnalysisBuilder.SceneImageType
-
Photo horizon.
- PHOTO_REAL - Static variable in class nxopen.uf.UFDisp.ShadeMethod
-
- PHOTO_REALISTIC - Static variable in class nxopen.ModelingViewHighQualityImage.ShadeMethod
-
All the features of the Improved method, plus support for
anti-aliasing and transparency.
- PHOTOREAL - Static variable in class nxopen.display.IRayPlusStudioEditorBuilder.DynamicIRayPlusStudioRenderModeType
-
Very good ray traced display quality when dynamic interaction stops
- PHYSICAL - Static variable in class nxopen.cae.ModelUpdateDesignVariablesRapidCreateBuilder.DesignVariableTypeEnum
-
- PHYSICAL_MATERIAL - Static variable in class nxopen.BasePropertyTable.BasePropertyType
-
- PHYSICAL_MATERIAL - Static variable in class nxopen.cae.PropertyTable.PropertyType
-
BASE_PROPERTY_TABLE_property_type_physical_material
- PHYSICAL_PROPERTY_TABLE - Static variable in class nxopen.cae.ModelDisplayBuilder.ElmClrBasis
-
Physical Property Table
- PhysicalDampingSettings - Interface in nxopen.cae.responsesimulation
-
Represents the physical damping settings for a response simulation meta solution .
- physicalHysteretic() - Method in interface nxopen.motion.NormalModeProperty
-
Returns the physical hysteretic factor
License requirements: mechanisms ("MECHANISMS")
.
- physicalHystereticScalingFactor() - Method in interface nxopen.cae.responsesimulation.PhysicalDampingSettings
-
Returns the scaling factor for physical hysteretic damping
License requirements: nx_response_anlys ("NX Response Analysis")
.
- physicalHystereticScalingFactor() - Method in interface nxopen.motion.FlexPhysicalDampingSettings
-
Returns the scaling factor for physical hysteretic damping
License requirements: mechanisms ("MECHANISMS")
.
- PhysicalMaterial - Interface in nxopen
-
Represents Physical Material .
- PhysicalMaterial.AssignWarning - Class in nxopen
-
Indicates the underlying issues when trying to assign material
- PhysicalMaterial.Category - Class in nxopen
-
The different categories of materials.
- PhysicalMaterial.ParentlibrarymaterialData - Class in nxopen
-
- PhysicalMaterial.Type - Class in nxopen
-
The different types of materials.
- PhysicalMaterialAssignBuilder - Interface in nxopen.physmat
-
- PhysicalMaterialBuilder - Interface in nxopen
-
- PhysicalMaterialCollection - Interface in nxopen
-
- PhysicalMaterialLibMgrBuilder - Interface in nxopen.physmat
-
- PhysicalMaterialListBuilder - Interface in nxopen.physmat
-
This builder is used by the Materials list component that allows copying, editing, deleting. etc.
- physicalMaterials() - Method in interface nxopen.MaterialManager
-
- physicalMemory - Variable in class nxopen.uf.UF.SystemInfo
-
- physicalPropertyOffset() - Method in interface nxopen.cae.SolverAppendOption
-
Returns the physical property offset
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- physicalPropertyTable() - Method in interface nxopen.cae.BeamEADBuilder
-
Returns the physical property table of the beam element
License requirements: nx_masterfem ("Finite Element Modeling")
.
- physicalPropertyTable() - Method in interface nxopen.cae.BushingEADBuilder
-
Returns the physical property table of the bushing element
License requirements: nx_masterfem ("Finite Element Modeling")
.
- physicalPropertyTable() - Method in interface nxopen.cae.DamperEADBuilder
-
Returns the physical property table of the damper element
License requirements: nx_masterfem ("Finite Element Modeling")
.
- physicalpropertytable - Variable in class nxopen.cae.ElementAssociatedDataUtils.AskBeamData
-
Physical property table of the beam element.
- physicalpropertytable - Variable in class nxopen.cae.ElementAssociatedDataUtils.AskBushingData
-
Physical property table of the bushing element.
- physicalpropertytable - Variable in class nxopen.cae.ElementAssociatedDataUtils.AskDamperData
-
Physical property table of the damper element.
- physicalpropertytable - Variable in class nxopen.cae.ElementAssociatedDataUtils.AskGapData
-
Physical property table of the gap element.
- physicalpropertytable - Variable in class nxopen.cae.ElementAssociatedDataUtils.AskShellData
-
Physical property table of the shell element.
- physicalpropertytable - Variable in class nxopen.cae.ElementAssociatedDataUtils.AskSpringData
-
Physical property table of the spring element.
- physicalPropertyTable() - Method in interface nxopen.cae.GapEADBuilder
-
Returns the physical property table of the gap element
License requirements: nx_masterfem ("Finite Element Modeling")
.
- PhysicalPropertyTable - Interface in nxopen.cae
-
Represents a Physical Property Table.
- physicalPropertyTable() - Method in interface nxopen.cae.ShellEADBuilder
-
Returns the physical property table of the shell element
License requirements: nx_masterfem ("Finite Element Modeling")
.
- physicalPropertyTable() - Method in interface nxopen.cae.SpringEADBuilder
-
Returns the physical property table of the spring element
License requirements: nx_masterfem ("Finite Element Modeling")
.
- PhysicalPropertyTableCollection - Interface in nxopen.cae
-
Creates physical property tables
PhysicalPropertyTable
in a fem model
To obtain an instance of this class, refer to
CaePart
Created in NX5.0.0
- physicalPropertyTableIdOffset - Variable in class nxopen.cae.FEModel.IdSpecificationObject
-
If true physical_property_table_start_id will be used as an offset for imported physical property table ids
- physicalPropertyTables() - Method in interface nxopen.cae.CaePart
-
Returns the physical property table collection belonging to this CAE Part .
- physicalPropertyTableStartId - Variable in class nxopen.cae.FEModel.IdSpecificationObject
-
Start id to use for imported physical property tables
- physicalPropertyTableState() - Method in interface nxopen.cae.BeamEADBuilder
-
Returns the physical property table state state drives the action upon commit
License requirements: nx_masterfem ("Finite Element Modeling")
.
- physicalPropertyTableState() - Method in interface nxopen.cae.BushingEADBuilder
-
Returns the physical property table state state drives the action upon commit
License requirements: nx_masterfem ("Finite Element Modeling")
.
- physicalPropertyTableState() - Method in interface nxopen.cae.DamperEADBuilder
-
Returns the physical property table state state drives the action upon commit
License requirements: nx_masterfem ("Finite Element Modeling")
.
- physicalPropertyTableState() - Method in interface nxopen.cae.GapEADBuilder
-
Returns the physical property table state state drives the action upon commit
License requirements: nx_masterfem ("Finite Element Modeling")
.
- physicalPropertyTableState() - Method in interface nxopen.cae.ShellEADBuilder
-
Returns the physical property table state state drives the action upon commit
License requirements: nx_masterfem ("Finite Element Modeling")
.
- physicalPropertyTableState() - Method in interface nxopen.cae.SpringEADBuilder
-
Returns the physical property table state state drives the action upon commit
License requirements: nx_masterfem ("Finite Element Modeling")
.
- physicalTypes() - Method in interface nxopen.cae.ModelUpdateDesignVariablesRapidCreateBuilder
-
Returns the physical types
License requirements: None.
- physicalViscous() - Method in interface nxopen.motion.NormalModeProperty
-
Returns the physical viscous factor
License requirements: mechanisms ("MECHANISMS")
.
- physicalViscousScalingFactor() - Method in interface nxopen.cae.responsesimulation.PhysicalDampingSettings
-
Returns the scaling factor for physical viscous damping
License requirements: nx_response_anlys ("NX Response Analysis")
.
- physicalViscousScalingFactor() - Method in interface nxopen.motion.FlexPhysicalDampingSettings
-
Returns the scaling factor for physical viscous damping
License requirements: mechanisms ("MECHANISMS")
.
- physics() - Method in interface nxopen.mechatronics.GanttOperationBuilder
-
Returns the input of the operation : it can be a physics object(Rigid Body,
Collision, Constraints, Joints etc.), FunctionTable, part occurrence.
- PhysicsConstraint - Interface in nxopen.mechatronics
-
Represents the mechatronics constraint class.
- PhysicsConstraintBuilder - Interface in nxopen.mechatronics
-
This is an abstract class, and cannot be created.
- PhysicsConversionBuilder - Interface in nxopen.motion
-
- PhysicsConversionBuilder.PhysicsData - Class in nxopen.motion
-
- PhysicsData() - Constructor for class nxopen.motion.PhysicsConversionBuilder.PhysicsData
-
- PhysicsJoint - Interface in nxopen.mechatronics
-
Represents the mechatronics joint class.
- PhysicsJointBuilder - Interface in nxopen.mechatronics
-
Represents a base builder for Physics Joints.
- PhysicsManager - Interface in nxopen.mechatronics
-
A manager to deal with all physics objects.
- physicsManager() - Method in interface nxopen.Part
-
Returns the PhysicsManager for this part .
- physicsObject() - Method in interface nxopen.mechatronics.ChangeOwnerBuilder
-
Returns the physics object.
- physicsObject() - Method in interface nxopen.mechatronics.GanttOperationConditionBuilder
-
Returns the conditin object :it can be a physics object(Rigid Body,
Collision, Constraints, Joints etc.), FunctionTable.
- physicsObject - Variable in class nxopen.mechatronics.SignalAdapterBuilder.ParameterData
-
Physics Object
- physicsPreference() - Method in interface nxopen.mechatronics.PhysicsManager
-
- PhysicsPreference - Interface in nxopen.mechatronics
-
Represents the Physics Preference class.
- PhysicsPreferenceCollection - Interface in nxopen.mechatronics
-
Represents a collection of Physics Preference.
- physicsPropTag - Variable in class nxopen.mechatronics.SignalAdapterBuilder.ParameterData
-
Physics Property Tag
- physicsproto - Variable in class nxopen.motion.PhysicsConversionBuilder.PhysicsData
-
- physOffset - Variable in class nxopen.cae.FEModelOccurrence.OccEntityLabelOffsetsData
-
physical offset
- PI - Static variable in class nxopen.uf.UFConstants
-
- PICK - Static variable in class nxopen.Selection.DialogResponse
-
User picked object on screen
- PICK_RESPONSE - Static variable in class nxopen.uistyler.DialogResponse
-
User response was a selection of objects.
- pickArea() - Method in interface nxopen.tooling.DieBaseBuilder
-
The action to pick work area for die base.
- pickCsys(String, int) - Method in interface nxopen.uf.UFUi
-
- PickCsysData() - Constructor for class nxopen.uf.UFUi.PickCsysData
-
- PickCsysReturn - Variable in class nxopen.uf.UFUi.PickCsysData
-
- pickLocation() - Method in interface nxopen.tooling.DieBaseBuilder
-
The action to pick location for die base.
- pickPoint() - Method in interface nxopen.annotations.Associativity
-
Returns the pick point
License requirements: None.
- pickPoint() - Method in interface nxopen.blockstyler.SelectObject
-
Returns the PickPoint
License requirements: None.
- pickPoint() - Method in interface nxopen.features.FillHoleBuilder
-
Returns the picking point on the facet body
License requirements: None.
- pickPoint() - Method in interface nxopen.features.RadialDimensionBuilder
-
Returns the pick point
License requirements: None.
- pickPoint(String) - Method in interface nxopen.uf.UFUi
-
- PickPointData() - Constructor for class nxopen.uf.UFUi.PickPointData
-
- pickPointOnAttachment() - Method in interface nxopen.features.shipdesign.BracketBuilder
-
Returns the pick point on attachment face.
- pickPointOnReinforcement() - Method in interface nxopen.features.shipdesign.BracketBuilder
-
Returns the pick point on reinforcement face.
- PickPointReturn - Variable in class nxopen.uf.UFUi.PickPointData
-
- PickRectanglePointsBuilder - Interface in nxopen.linedesigner
-
Pick Rectangle Points
To create a new instance of this class, use nxopen.linedesigner.LineDesignerManager#createPickRectanglePointsBuilder
Created in NX9.0.0
- pickSequentially() - Method in interface nxopen.cae.ResultProbeBuilder
-
Returns the pick sequentially
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- pickSplitLocation() - Method in interface nxopen.tooling.DieBaseBuilder
-
The action to pick split location.
- pickView(String) - Method in interface nxopen.uf.UFUi
-
- PickViewData() - Constructor for class nxopen.uf.UFUi.PickViewData
-
- PickViewReturn - Variable in class nxopen.uf.UFUi.PickViewData
-
- pictorial() - Method in interface nxopen.drawings.SectionLineBuilder
-
- PICTORIAL - Static variable in class nxopen.drawings.SectionLineBuilder.Types
-
Deprecated.
- PictorialSectionLine - Interface in nxopen.drawings
-
A Pictorial Simple or Pictorial Stepped Section Line.
- pictorialSxview - Variable in class nxopen.uf.UFDraw.AskPictorialSxlineData
-
- PID - Static variable in class nxopen.cae.Post.DisplayColorSchemeType
-
- PidManager - Interface in nxopen.pid
-
A manager to deal with all objects.
- PidManagerFactory - Class in nxopen.pid
-
- PidManagerFactory() - Constructor for class nxopen.pid.PidManagerFactory
-
- pids() - Method in interface nxopen.cae.ResultVariable
-
Returns the PIDs
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- PIECE_PART_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
-
Piece part
- pieceLength() - Method in interface nxopen.routing.OverstockBuilder
-
- pieceLengthLock() - Method in interface nxopen.routing.OverstockBuilder
-
Returns the piece length lock state.
- PIERCE_TASK - Static variable in class nxopen.tooling.DieEngProcessUpdateManagerBuilder.Types
-
- pierceAndExtrude() - Method in interface nxopen.die.FlangeTaskBuilder
-
Returns the pierce and extrude setting of the flange task.
- PierceBoundsData() - Constructor for class nxopen.die.PierceTaskBuilder.PierceBoundsData
-
- piercedFaces - Variable in class nxopen.uf.UFModlFeatures.AskHollowData
-
- pierceFaces() - Method in interface nxopen.features.sheetmetal.SolidPunchBuilder
-
Returns the pierce faces of the tool body.
- pierceFaces() - Method in interface nxopen.features.shipdesign.ShipProfileCutoutBuilder
-
Returns the pierce faces
License requirements: None.
- pierceFaces - Variable in class nxopen.uf.UFModl.SolidPunchData
-
- pierceGasPressure() - Method in interface nxopen.cam.FeedsBuilder
-
Returns the Pierce Gas Pressure
License requirements: cam_base ("CAM BASE")
.
- pierceGasPressure() - Method in interface nxopen.cam.LaserMethod
-
Returns the Pierce Gas Pressure
License requirements: None.
- pierceGasType() - Method in interface nxopen.cam.FeedsBuilder
-
Returns the Pierce Gas Type
License requirements: cam_base ("CAM BASE")
.
- pierceGasType() - Method in interface nxopen.cam.LaserMethod
-
Returns the Pierce Gas Type
License requirements: None.
- PierceHoleChildBuilder - Interface in nxopen.die
-
Represents a Pierce Hole Child sub feature.
- PierceHoleChildBuilder.HoleAttributesData - Class in nxopen.die
-
- PierceHoleChildBuilder.PierceHoleShapeData - Class in nxopen.die
-
- PierceHoleChildBuilder.ShapeTypeOption - Class in nxopen.die
-
Settings for the shape type of the pierce hole.
- pierceHoleDirection() - Method in interface nxopen.die.PierceHoleChildBuilder
-
Returns the pierce hole direction
License requirements: ug_die_design ("Die Design")
.
- pierceHoleParent() - Method in interface nxopen.die.SteelInsertBuilder
-
Returns the pierce hole parent builder of the diesteelinsert
License requirements: ug_die_design ("Die Design")
.
- PierceHoleParentBuilder - Interface in nxopen.die
-
Represents a Pierce Hole Parent sub feature.
- PierceHoleParentBuilder.HoleAttributesData - Class in nxopen.die
-
- pierceHoles() - Method in interface nxopen.die.PierceTaskBuilder
-
Returns the pierce holes
License requirements: die_engineering ("DIE ENGINEERING")
.
- PierceHoleShapeData() - Constructor for class nxopen.die.PierceHoleChildBuilder.PierceHoleShapeData
-
- pierceHolesList() - Method in interface nxopen.die.PierceTaskBuilder
-
Returns the pierce holes list
License requirements: die_engineering ("DIE ENGINEERING")
.
- PierceItemBuilder - Interface in nxopen.die
-
- PierceItemBuilder.HoleShapeType - Class in nxopen.die
-
Settings for the hole shape of individual pierces.
- PierceItemBuilder.SizingMethodOption - Class in nxopen.die
-
Settings for the sizing method of individual pierces.
- PierceItemBuilderList - Interface in nxopen.die
-
Represents a list of objects.
- pierceLaserDelay() - Method in interface nxopen.cam.FeedsBuilder
-
Returns the Laser Pierce Delay
License requirements: cam_base ("CAM BASE")
.
- pierceLaserDelay() - Method in interface nxopen.cam.LaserMethod
-
Returns the Pierce Laser Delay
License requirements: None.
- pierceLaserFrequency() - Method in interface nxopen.cam.FeedsBuilder
-
Returns the Laser Pierce Frequency
License requirements: cam_base ("CAM BASE")
.
- pierceLaserFrequency() - Method in interface nxopen.cam.LaserMethod
-
Returns the Pierce Laser Frequency
License requirements: None.
- pierceLaserPower() - Method in interface nxopen.cam.FeedsBuilder
-
Returns the Laser Pierce Power
License requirements: cam_base ("CAM BASE")
.
- pierceLaserPower() - Method in interface nxopen.cam.LaserMethod
-
Returns the Pierce Laser Power
License requirements: None.
- pierceLocations() - Method in interface nxopen.die.TrimFlangeDieAssistantBuilder
-
Returns the pierce locations
License requirements: None.
- pierceTask(Feature) - Method in interface nxopen.die.DieCollection
-
Creates/Edits the pierce task feature builder.
- PierceTask - Interface in nxopen.features
-
Represents a Pierce Task feature
To create or edit an instance of this class, use
PierceTaskBuilder
Created in NX5.0.0
- PierceTaskBuilder - Interface in nxopen.die
-
- PierceTaskBuilder.CameraLayerAndXmlpData - Class in nxopen.die
-
- PierceTaskBuilder.CamTypes - Class in nxopen.die
-
Settings for the cam type of the pierce task.
- PierceTaskBuilder.CenterPointOptionTypes - Class in nxopen.die
-
Settings for the center point output options of the pierce task.
- PierceTaskBuilder.PierceBoundsData - Class in nxopen.die
-
- PierceTaskBuilder.PrecisionTypes - Class in nxopen.die
-
Settings for the precistion type of the pierce task.
- pierceType() - Method in interface nxopen.die.FlangeTaskBuilder
-
Returns the pierce type of the flange task
License requirements: die_engineering ("DIE ENGINEERING")
.
- pierceType() - Method in interface nxopen.tooling.ScrapDesignBuilder
-
Returns the piercing type, piercing or piloting
License requirements: None.
- PIERCING - Static variable in class nxopen.tooling.ForceCalculationBuilder.ProcessTypes
-
piercing
- PIERCING - Static variable in class nxopen.tooling.QuickQuotationBuilder.ObjectTypes
-
sheet body type is piercing
- PIERCING - Static variable in class nxopen.tooling.ScrapDesignBuilder.DefScrapType
-
Scrap will be defined as piercing type
- piercingColor() - Method in interface nxopen.tooling.QuickQuotationBuilder
-
Returns the piercing color.
- piercingColor() - Method in interface nxopen.tooling.ScrapDesignBuilder
-
Returns the piercing color
License requirements: None.
- piercingInsert() - Method in interface nxopen.tooling.ToolingManager
-
Returns the PiercingInsert instance belonging to this part .
- PiercingInsertBuilder - Interface in nxopen.tooling
-
Represents piercing insert builder.
- PiercingInsertBuilder.AssociationToolType - Class in nxopen.tooling
-
Specifies the association tool operation option.
- PiercingInsertBuilder.DieInsertTypeItems - Class in nxopen.tooling
-
Specifies the type of insert.
- PiercingInsertBuilder.InsertPosition - Class in nxopen.tooling
-
Specifies the position of piercing inserts, for EDW only
- PiercingInsertBuilder.NormalBbpslugType - Class in nxopen.tooling
-
Specifies the type of bottom plate slug.
- PiercingInsertBuilder.NormalCavityType - Class in nxopen.tooling
-
Specifies the type of cavity.
- PiercingInsertBuilder.NormalClearanceOptionType - Class in nxopen.tooling
-
Specifies the design option of piercing insert.
- PiercingInsertBuilder.NormalDsslugType - Class in nxopen.tooling
-
Specifies the type of die shoe slug.
- PiercingInsertBuilder.NormalOffsetSideType - Class in nxopen.tooling
-
Specifies the offset side of normal pierce insert design.
- PiercingInsertBuilder.NormalUdpparentPartType - Class in nxopen.tooling
-
Specifies the parent part of user defined punch.
- PiercingInsertBuilder.PunchPocketTypeItemsBP - Class in nxopen.tooling
-
Specifies the punch pocket type in backing plate.
- PiercingInsertBuilder.PunchPocketTypeItemsPP - Class in nxopen.tooling
-
Specifies the punch pocket type in punch plate.
- PiercingInsertBuilder.PunchPocketTypeItemsSP - Class in nxopen.tooling
-
Specifies the punch pocket type in stripper plate.
- PiercingInsertBuilder.Types - Class in nxopen.tooling
-
Specifies the option of piercing insert type.
- PiercingInsertCollection - Interface in nxopen.tooling
-
- PiercingInsertMiniToolsBuilder - Interface in nxopen.tooling
-
Represents piercing insert mini tools builder.
- PiercingInsertMiniToolsBuilder.AssociationToolItems - Class in nxopen.tooling
-
Specifies the association tool operation option.
- piercingPoint() - Method in interface nxopen.cam.LaserCircleCutout
-
Returns the Piercing Point
License requirements: None.
- piercingPoint() - Method in interface nxopen.cam.LaserHexagonCutout
-
Returns the Piercing Point
License requirements: None.
- piercingPoint() - Method in interface nxopen.cam.LaserRectangleCutout
-
Returns the Piercing Point
License requirements: None.
- piercingPoint() - Method in interface nxopen.cam.LaserSlotCutout
-
Returns the Piercing Point
License requirements: None.
- Pillar - Interface in nxopen.features.shipdesign
-
Represents a Pillar feature
To create or edit an instance of this class, use
PillarBuilder
Created in NX8.0.0
- PILLAR - Static variable in class nxopen.features.shipdesign.ShipnamesBuilderType
-
- PILLAR - Static variable in class nxopen.features.shipdesign.ShipPreparationInfo.Types
-
The data represents a pillar feature.
- PILLAR - Static variable in class nxopen.features.shipdesign.SubSystemsBuilder.Types
-
Pillar system, any system using spreadsheet defined stock.
- PILLAR_SYSTEM - Static variable in class nxopen.features.shipdesign.ShipDesignPreferencesBuilder.Types
-
Pillar System type
- PILLAR_SYSTEM - Static variable in class nxopen.features.shipdesign.ShipnamesBuilderType
-
- PillarBuilder - Interface in nxopen.features.shipdesign
-
- PillarBuilder.CapOptions - Class in nxopen.features.shipdesign
-
Settings to indicate how the cap is designed.
- PillarBuilder.CreationMethod - Class in nxopen.features.shipdesign
-
Method used to create the support feature.
- PillarBuilder.EndCutTypes - Class in nxopen.features.shipdesign
-
this specifies how the end cuts are applied
- PillarBuilder.EndTreatmentTypes - Class in nxopen.features.shipdesign
-
this specifies how the end is treated
- PillarBuilder.EndTypeOptions - Class in nxopen.features.shipdesign
-
this specifies end type option
- PillarBuilder.StockSectionType - Class in nxopen.features.shipdesign
-
SpreadSheet Type Profile or BuiltUp
- PILLARS - Static variable in class nxopen.features.vehicledesign.AllAroundVisionBuilder.Types
-
Pillars as obstructing geometry.
- pillarStock() - Method in interface nxopen.features.shipdesign.EditStockBuilder
-
Returns the stock data used to define the stock information of the pillar.
- pillarStockData() - Method in interface nxopen.features.shipdesign.SubSystemBuilder
-
Returns the pillar sub system stock data.
- PillarSystem - Interface in nxopen.features.shipdesign
-
Represents a pillar system feature.
- PillarSystemBuilder - Interface in nxopen.features.shipdesign
-
Represents a
PillarSystem
builder which is used to create or edit a pillar system feature.
- PillarSystemBuilder.StockSectionType - Class in nxopen.features.shipdesign
-
SpreadSheet Type Profile or BuiltUp
- PillarSystemBuilder.Types - Class in nxopen.features.shipdesign
-
Used to specify how the pillar system is defined.
- PILOTING - Static variable in class nxopen.tooling.ScrapDesignBuilder.DefScrapType
-
Scrap will be defined as piloting type
- pilotingColor() - Method in interface nxopen.tooling.ScrapDesignBuilder
-
Returns the piloting color
License requirements: None.
- PIN - Static variable in class nxopen.routing.electrical.Connection.RouteLevel
-
Route to the pin on the connector component.
- PIN - Static variable in class nxopen.routing.electrical.ElectricalStockDevice.RouteLevel
-
- PIN_DATUM_LOCATION - Static variable in class nxopen.uf.UFConstants
-
- PIN_DATUM_LOCATION_NON_ASSOC - Static variable in class nxopen.uf.UFConstants
-
- PIN_FEATURE - Static variable in class nxopen.uf.UFGdt.FeatureType
-
- PIN_MEASUREMENT_FEATURE - Static variable in class nxopen.uf.UFGdt.FeatureType
-
- PIN_MEASUREMENT_LOCATION - Static variable in class nxopen.uf.UFConstants
-
- PIN_MEASUREMENT_LOCATION_NON_ASSOC - Static variable in class nxopen.uf.UFConstants
-
- pinDirection() - Method in interface nxopen.annotations.LocatorDesignatorBuilder
-
Returns the pin direction
License requirements: None.
- pinflagendadof1 - Variable in class nxopen.cae.ElementAssociatedDataUtils.AskBeamData
-
Pin flag End A for DOF 1.
- pinflagendadof2 - Variable in class nxopen.cae.ElementAssociatedDataUtils.AskBeamData
-
Pin flag End A for DOF 2.
- pinflagendadof3 - Variable in class nxopen.cae.ElementAssociatedDataUtils.AskBeamData
-
Pin flag End A for DOF 3.
- pinflagendadof4 - Variable in class nxopen.cae.ElementAssociatedDataUtils.AskBeamData
-
Pin flag End A for DOF 4.
- pinflagendadof5 - Variable in class nxopen.cae.ElementAssociatedDataUtils.AskBeamData
-
Pin flag End A for DOF 5.
- pinflagendadof6 - Variable in class nxopen.cae.ElementAssociatedDataUtils.AskBeamData
-
Pin flag End A for DOF 6.
- pinflagendbdof1 - Variable in class nxopen.cae.ElementAssociatedDataUtils.AskBeamData
-
Pin flag End B for DOF 1.
- pinflagendbdof2 - Variable in class nxopen.cae.ElementAssociatedDataUtils.AskBeamData
-
Pin flag End B for DOF 2.
- pinflagendbdof3 - Variable in class nxopen.cae.ElementAssociatedDataUtils.AskBeamData
-
Pin flag End B for DOF 3.
- pinflagendbdof4 - Variable in class nxopen.cae.ElementAssociatedDataUtils.AskBeamData
-
Pin flag End B for DOF 4.
- pinflagendbdof5 - Variable in class nxopen.cae.ElementAssociatedDataUtils.AskBeamData
-
Pin flag End B for DOF 5.
- pinflagendbdof6 - Variable in class nxopen.cae.ElementAssociatedDataUtils.AskBeamData
-
Pin flag End B for DOF 6.
- pinIdentifier() - Method in interface nxopen.routing.TerminalPort
-
Returns the pin identifier (name) of the
TerminalPort
License requirements: routing_base ("Routing Basic")
Created in NX4.0.0
- PinJig - Interface in nxopen.features.shipdesign
-
Represents a Pinjig feature
To create or edit an instance of this class, use
PinJigBuilder
Created in NX10.0.0
- PinJigBuilder - Interface in nxopen.features.shipdesign
-
- pinJigData() - Method in interface nxopen.features.shipdesign.PinJigBuilder
-
Returns the Pinjig data defined in the Pinjig parameter spreadsheet.
- PINK_PINK_MAGENTA_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- PINK_PINK_RED_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- PinListBuilder - Interface in nxopen.annotations
-
Builder for Formboard pin list functionality used in formboard.
- PinListBuilder.FilterType - Class in nxopen.annotations
-
The options specify the filter type.
- pinned() - Method in interface nxopen.diagramming.PortBuilder
-
Returns the flag that indicates the port is pinned.
- pinRadius() - Method in interface nxopen.motion.JointFrictionLms
-
Returns the pin radius
License requirements: None.
- pinRadiusExpression() - Method in interface nxopen.motion.JointFrictionAdams
-
Returns the pin radius expression
License requirements: None.
- pinRadiusExpression() - Method in interface nxopen.motion.JointFrictionRecurDyn
-
Returns the pin radius expression
License requirements: None.
- PINS - Static variable in class nxopen.cam.InspectionPatternFeatureBuilder.FeatureFilterTypes
-
Only outer circle, cylinder, and cone inspection features will be listed
- pinToScreen() - Method in interface nxopen.markup.MarkupObject
-
Returns the pin to screen
License requirements: None.
- PIOLA_KIRCHOFF_STRESS - Static variable in class nxopen.cae.Result.Quantity
-
- PIP - Static variable in class nxopen.ame.PlcDataType
-
- PIP_FORM_GROUP - Static variable in class nxopen.uf.UFSmd.PipTypeEnumE
-
- PIP_FORM_PROCESS - Static variable in class nxopen.uf.UFSmd.PipTypeEnumE
-
- PIP_GROUP - Static variable in class nxopen.uf.UFSmd.PipTypeEnumE
-
- PIP_PROCESS - Static variable in class nxopen.uf.UFSmd.PipTypeEnumE
-
- PIP_STEP - Static variable in class nxopen.uf.UFSmd.PipTypeEnumE
-
- PIP_UNFORM_GROUP - Static variable in class nxopen.uf.UFSmd.PipTypeEnumE
-
- PIP_UNFORM_PROCESS - Static variable in class nxopen.uf.UFSmd.PipTypeEnumE
-
- pipe - Variable in class nxopen.pid.EquipmentBuilder.InlineSymbolLocationData
-
- pipe - Variable in class nxopen.pid.EquipmentBuilder.NewInlineConnectionData
-
- pipe - Variable in class nxopen.pid.FlowDirectionArrowBuilder.ConnectionData
-
- Pipe - Interface in nxopen.pid
-
Represents the Pipe class.
- pipe - Variable in class nxopen.pid.PipeBuilder.NewStartTeeConnectionData
-
- pipe - Variable in class nxopen.pid.PipeBuilder.StartTeeLocationData
-
- PIPE_ONLY - Static variable in class nxopen.features.SilhouetteFlangeBuilder.OutputSurfaceOptions
-
Output pipe
- PipeBuilder - Interface in nxopen.pid
-
Represents a PipeBuilder.
- PipeBuilder.EndTeeData - Class in nxopen.pid
-
- PipeBuilder.NewStartTeeConnectionData - Class in nxopen.pid
-
- PipeBuilder.StartData - Class in nxopen.pid
-
- PipeBuilder.StartTeeData - Class in nxopen.pid
-
- PipeBuilder.StartTeeLocationData - Class in nxopen.pid
-
- pipeJointSetType(JointItemBuilder) - Method in interface nxopen.weld.CustomManager.PipeJointSetType
-
User defined method that is called whenever a welding joint is created.
- PIPELINE - Static variable in class nxopen.RuleManager.LicenseType
-
- pipePressureLossOfLaminarFlow(double, double, double, double, double, double, double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the pressure drop in a section of uniform pipe running from input point
to output point.
- pipeSpecPathId() - Method in interface nxopen.plas.RunBuilder
-
Returns the pipe specification object of this run.
- pipeStock() - Method in interface nxopen.pid.LibraryAuthoringBuilder
-
Returns the pipe stock sub-builder.
- PipeStockBuilder - Interface in nxopen.diagramminglibraryauthor
-
Represents a PipeStockBuilder.
- PipingComponentFileBuilder - Interface in nxopen.mechanicalrouting
-
- pipingComponentFilePlugin(String, Component[], CustomManager.PipingComponentFileOptions) - Method in interface nxopen.routing.CustomManager.PipingComponentFilePlugin
-
This defines the prototype for the piping component file plugin.
- PipNodeData() - Constructor for class nxopen.uf.UFSmd.PipNodeData
-
- PipNodeData(UFSmd.PipTypeEnumE, Tag, String, Tag, int, double) - Constructor for class nxopen.uf.UFSmd.PipNodeData
-
- pipNodes - Variable in class nxopen.uf.UFSmd.AskChildPipNodesData
-
- pipSequential - Variable in class nxopen.uf.UFSmd.GenPrefs
-
- pistonDiameter() - Method in interface nxopen.mechatronics.HydraulicCylinderBuilder
-
Returns the diameter of the piston.
- pistonDiameter() - Method in interface nxopen.mechatronics.PneumaticCylinderBuilder
-
Returns the diameter of the piston.
- pistonRodDiameter() - Method in interface nxopen.mechatronics.HydraulicCylinderBuilder
-
Returns the diameter of the piston rod.
- pistonRodDiameter() - Method in interface nxopen.mechatronics.PneumaticCylinderBuilder
-
Returns the diameter of the piston rod.
- PITCH - Static variable in class nxopen.annotations.HoleCalloutSettingsBuilder.Parametertype
-
- pitch() - Method in interface nxopen.cam.HoleBossGeom
-
Returns the Pitch
License requirements: None.
- pitch() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns the pitch of the Scan Helix
License requirements: None.
- PITCH - Static variable in class nxopen.cam.InspectionMethodBuilder.ScanHelixTurnTypes
-
Pitch
- pitch() - Method in interface nxopen.cam.InspectionScanHelixBuilder
-
Returns the pitch of the Scan Helix
License requirements: None.
- PITCH - Static variable in class nxopen.cam.PitchSetting.OptionTypes
-
Pitch
- PITCH - Static variable in class nxopen.cam.PitchSetting.OutputUnitTypes
-
Pitch
- PITCH - Static variable in class nxopen.geometricutilities.PatternSpacing.SpacingType
-
This is for pattern fill case.
- pitch() - Method in interface nxopen.tooling.BlankLayoutBuilder
-
Returns the distance between the adjacent stations.
- pitch() - Method in interface nxopen.tooling.DirectUnfoldBuilder
-
Returns the pitch.
- pitch() - Method in interface nxopen.tooling.IntermediateStageBuilder
-
Returns the pitch.
- pitch() - Method in interface nxopen.tooling.QuickQuotationBuilder
-
Returns the pitch.
- pitch() - Method in interface nxopen.tooling.ReliefDesignBuilder
-
Returns the pitch.
- pitch - Variable in class nxopen.uf.UFDrf.WeldSymInfo
-
- pitch - Variable in class nxopen.uf.UFModl.SymbThreadData
-
- PITCH_AND_SPAN - Static variable in class nxopen.geometricutilities.PatternSpacing.SpacingType
-
Specify distance between instances and distance for all instances, number of copies is calculated.
- pitchAlongSpiral() - Method in interface nxopen.geometricutilities.SpiralPattern
-
Returns the pitch along spiral curve
License requirements: None.
- PITCHAND_SPAN - Static variable in class nxopen.linedesigner.RailingFeatureBuilder.SpaceType
-
- pitchAngle() - Method in interface nxopen.features.vehicledesign.HoodVisibilityBuilder
-
Returns the pitch angle which determines the quantity of section planes
License requirements: None.
- pitchAngle() - Method in interface nxopen.geometricutilities.AngularPatternSpacing
-
Returns the angle for the spacing of the pattern from one instance to the next.
- pitchDiaDeviation - Variable in class nxopen.uf.UFGdt.ThreadData
-
- pitchDiaGrade - Variable in class nxopen.uf.UFGdt.ThreadData
-
- pitchDistance() - Method in interface nxopen.geometricutilities.AngularPatternSpacing
-
Returns the circumfrential distance for the spacing of the pattern from one instance to the next.
- pitchDistance() - Method in interface nxopen.geometricutilities.DistancePatternSpacing
-
Returns the distance for the spacing of the pattern from one instance to the next.
- pitchDistance() - Method in interface nxopen.geometricutilities.PolygonPatternSpacing
-
Returns the pitch distance along one side for the spacing of the pattern from one instance to the next.
- pitchLaw() - Method in interface nxopen.features.HelixBuilder
-
Returns the pitch
License requirements: None.
- pitchResult() - Method in interface nxopen.tooling.BlankNestingBuilder
-
Returns the distance between blanks that was found in the processing.
- PitchSetting - Interface in nxopen.cam
-
- pitchSetting() - Method in interface nxopen.cam.ThreadCutParameters
-
Returns the pitch setting
License requirements: None.
- PitchSetting.OptionTypes - Class in nxopen.cam
-
the pitch option types
- PitchSetting.OutputUnitTypes - Class in nxopen.cam
-
the output unit types
- PitchSetting.VarianceTypes - Class in nxopen.cam
-
the pitch variance types
- pitchType() - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder
-
Returns the pitch setting
License requirements: None.
- pitchValue() - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder
-
Returns the pitch value
License requirements: None.
- PIVOT - Static variable in class nxopen.cae.connections.DofCombination
-
DOF1 fixed, DOF2 fixed, DOF3 fixed, DOF4 free, DOF5 fixed, DOF6 fixed
- PIVOT_BEAM_SUSPENSION - Static variable in class nxopen.motion.TextBasedElementBuilder.TypeChoices
-
- pivotPoint() - Method in interface nxopen.features.MoveFaceBuilder
-
Returns the pivot point in axis to axis option in move face, don't use it until nx502
License requirements: None.
- pivotPoint() - Method in interface nxopen.features.StudioXformBuilder
-
- pivotPoint() - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder
-
Returns the pivot point about which the mirror rotates.
- pivotSetList() - Method in interface nxopen.features.StyledSweepBuilder
-
Returns the list of pivot sets
License requirements: None.
- PIXEL_COLOR - Static variable in class nxopen.display.ImageBaseBuilder.TransparencyColorFrom
-
- pixelColorTolerance() - Method in interface nxopen.display.ImageBaseBuilder
-
Returns the transparency pixel color tolerance.
- pixels - Variable in class nxopen.assemblies.WaveQuery.PartPreviewData
-
the pixels
- pixels - Variable in class nxopen.BasePart.PreviewImageData
-
Array of pixels
- PIXELS - Static variable in class nxopen.display.IRayPlusStudioEditorBuilder.IRayPlusStudioStaticImageUnitsType
-
static image size specified in pixel
- PIXELS - Static variable in class nxopen.display.RayTracedStudioEditorBuilder.RayTracedStudioStaticImageUnitsType
-
static image size specified in pixel
- PIXELS - Static variable in class nxopen.display.StudioImageCaptureBuilder.UnitsEnumType
-
Use pixel to define resolution
- PIXELS128 - Static variable in class nxopen.gateway.ImageCaptureBuilder.ImageSize
-
the 128 pixel size
- PIXELS16 - Static variable in class nxopen.gateway.ImageCaptureBuilder.ImageSize
-
the 16 pixel size
- PIXELS24 - Static variable in class nxopen.gateway.ImageCaptureBuilder.ImageSize
-
the 24 pixel size
- PIXELS32 - Static variable in class nxopen.gateway.ImageCaptureBuilder.ImageSize
-
the 32 pixel size
- PIXELS48 - Static variable in class nxopen.gateway.ImageCaptureBuilder.ImageSize
-
the 48 pixel size
- PIXELS64 - Static variable in class nxopen.gateway.ImageCaptureBuilder.ImageSize
-
the 64 pixel size
- PIXELS96 - Static variable in class nxopen.gateway.ImageCaptureBuilder.ImageSize
-
the 96 pixel size
- PixelWidthOptionsData() - Constructor for class nxopen.preferences.PartVisualizationLine.PixelWidthOptionsData
-
- pixelwidths - Variable in class nxopen.preferences.PartVisualizationLine.PixelWidthOptionsData
-
Array of 9 pixel widths, one for each of the 9 width settings,
that defines the appearance of widths in the graphics window
when useWidthScale is false.
- pjct - Variable in class nxopen.sim.KinematicConfigurator.FindAxisData
-
The parent junction of the axis
- PLACE_AFTER - Static variable in class nxopen.assemblies.ComponentAssembly.OrderTargetLocation
-
- PLACE_BEFORE - Static variable in class nxopen.assemblies.ComponentAssembly.OrderTargetLocation
-
- PLACE_PART - Static variable in class nxopen.routing.CustomManager.CallbackReason
-
Called after the Place Part command.
- PLACE_PART - Static variable in class nxopen.routing.CustomManager.DesignRuleReason
-
Called after the Place Part command.
- PLACE_PART - Static variable in class nxopen.routing.DesignRuleViolationCollection.Reason
-
- PlaceAutomationBuilder - Interface in nxopen.ame
-
- placeConnectorOnPort(CharacteristicList, Port) - Method in interface nxopen.routing.electrical.ConnectorDevice
-
Loads the parts based on the
CharacteristicList
adds the instance of the part to the current work part and places the
instance on the placer.
- placeCutElbow(CharacteristicList, CharacteristicList, ControlPoint) - Method in interface nxopen.routing.RouteManager
-
Places a cut elbow at the given Routing Control Point (RCP).
- placeDefaultElbow() - Method in interface nxopen.mechanicalrouting.CreatePathBuilder
-
Returns the setting to determine whether to assign the default elbow to new segments.
- placedpartidentifier - Variable in class nxopen.routing.ReuseLibrary.SpecificationsGetGenericPostPlacementsData
-
The list of placed part node identifiers
- PlaceElbowsBuilder - Interface in nxopen.routing
-
- placeFragmentOnPage(FragmentObject, PageObject, double, double) - Method in interface nxopen.ame.DiagramManager
-
Place Copied Fragment on page
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- placeHandrail(Point3d) - Method in interface nxopen.routing.HandrailBuilder
-
Creates a handrail post, horizontal railings assembly components and places them in the appropriate orientation.
- PLACEHOLDER_CONSTANT_VALUE - Static variable in class nxopen.ame.PlcRule.Type
-
- PLACEHOLDER_SYMBOLIC_REFERENCE - Static variable in class nxopen.ame.PlcRule.Type
-
- PLACEHOLDER_VARIABLE - Static variable in class nxopen.ame.PlcRule.Type
-
- placeInProductAspect() - Method in interface nxopen.ame.ProductSelectionBuilder
-
Returns the option to create product aspect for device if not available
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- placement() - Method in interface nxopen.annotations.IdSymbolBuilder
-
- placement() - Method in interface nxopen.cae.responsesimulation.StrainGageBuilder
-
Returns the placement type of strain gage
License requirements: nx_response_anlys ("NX Response Analysis")
.
- placement() - Method in interface nxopen.drawings.BaseViewBuilder
-
Returns the view placement
License requirements: None.
- placement() - Method in interface nxopen.drawings.ProjectedViewBuilder
-
Returns the view position
License requirements: None.
- placement() - Method in interface nxopen.drawings.ViewAlignmentBuilder
-
Returns the view placement component
License requirements: None.
- placement() - Method in interface nxopen.drawings.ViewPlacementBuilder
-
Returns the placement location.
- placement() - Method in interface nxopen.features.IsoparametricCurvesBuilder
-
Returns the placement type
License requirements: None.
- placement() - Method in interface nxopen.features.shipdesign.GeneralArrangementViewBuilder
-
Returns the view placement
License requirements: None.
- placement() - Method in interface nxopen.geometricanalysis.sectionanalysis.SectionAnalysisExBuilder
-
Returns the placement
License requirements: None.
- PLACEMENT_MANUAL_ARROWS_IN - Static variable in class nxopen.uf.UFDrf.TextArrowPlacement
-
- PLACEMENT_MANUAL_ARROWS_OUT - Static variable in class nxopen.uf.UFDrf.TextArrowPlacement
-
- PLACEMENT_MANUAL_ARROWS_SAME_DIRECTION - Static variable in class nxopen.uf.UFDrf.TextArrowPlacement
-
- placementByConnector(NXObject, TaggedObject) - Method in interface nxopen.linedesigner.ReuseLibraryUtilityBuilder
-
To place part from library using connector
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- placementCount() - Method in interface nxopen.features.sheetmetal.GussetBuilder
-
Returns the placement count
Only use this option to edit gussets created prior to NX10.
- placementDistance() - Method in interface nxopen.features.sheetmetal.GussetBuilder
-
Returns the placement distance
Only use this option to edit gussets created prior to NX10.
- placementEdge() - Method in interface nxopen.features.shipdesign.EndCutBuilder
-
Returns the select placement edges.
- PlacementEngineBuilder - Interface in nxopen.placement
-
Represents a builder class that will create and work with placement solutions.
- placementFace() - Method in interface nxopen.die.DrawBeadBuilder
-
Returns the collector containing faces (which will sew together) that identifies the surface shape the bead is attached too.
- placementFace() - Method in interface nxopen.features.Hole
-
Returns
the placement face of the hole.
- placementFace() - Method in interface nxopen.features.HoleFeatureBuilder
-
Returns
the placement face of the hole.
- placementFace() - Method in interface nxopen.features.shipdesign.CornerCutBuilder
-
Returns the placement face from plate system to add corner cuts.
- placementFace() - Method in interface nxopen.features.shipdesign.CornerCutListItemBuilder
-
Returns the placement face from plate system to add corner cuts.
- placementFace() - Method in interface nxopen.features.shipdesign.TraceLinesBuilder
-
Returns the placement face
License requirements: None.
- placementFace - Variable in class nxopen.uf.UFModl.SmcutoutData
-
- placementFace - Variable in class nxopen.uf.UFModl.SmpunchData
-
- placementFace() - Method in interface nxopen.weld.JointItemBuilder
-
Returns the placement face of a T-joint weld.
- placementFace() - Method in interface nxopen.weld.WeldFillBuilder
-
Returns the collector containing the faces to build the fill on.
- placementFace() - Method in interface nxopen.weld.WeldJointBuilder
-
Returns the placement face of a fillet weld.
- placementFaces() - Method in interface nxopen.features.shipdesign.EndCutBuilder
-
Returns the select placement faces.
- placementfaces - Variable in class nxopen.features.shipdesign.MarkingLineDesignBuilder.MarkingLineInformationData
-
(OF) - a set of cutting side faces that place marking line
- placementFaces() - Method in interface nxopen.features.TextBuilder
-
- placementGeometry() - Method in interface nxopen.features.shipdesign.EdgeCutBuilder
-
Returns the placement geometry.
- placementGeometry() - Method in interface nxopen.features.shipdesign.StiffenerBuilder
-
Returns the placement geometry
License requirements: None.
- placementMethod() - Method in interface nxopen.features.shipdesign.PillarBuilder
-
Returns the placement method used to locate the pillar.
- placementMethod() - Method in interface nxopen.features.shipdesign.SteelSupportBuilder
-
Returns the placement method used to create the feature
License requirements: None.
- placementOffset() - Method in interface nxopen.die.KeywayBuilder
-
Returns the amount to offset the base orientation
License requirements: None.
- placementOffset() - Method in interface nxopen.die.KeywayChildBuilder
-
Returns the placement offset of the keyway.
- placementOffset() - Method in interface nxopen.die.KeywayParentBuilder
-
Returns the placement offset of keyways.
- placementOption() - Method in interface nxopen.cae.MeshPointMultipleOnCurveBuilder
-
Returns the placement option
License requirements: None.
- placementOption() - Method in interface nxopen.cae.NodesOnCurveBuilder
-
Returns the placement option
License requirements: None.
- placementOption() - Method in interface nxopen.drawings.ViewCreationWizardBuilder
-
Returns the placement option
License requirements: None.
- PlacementOriginAndDirectionData() - Constructor for class nxopen.features.sheetmetal.GussetBuilder.PlacementOriginAndDirectionData
-
- placementPlane() - Method in interface nxopen.features.shipdesign.CustomBracketBuilder
-
Returns the placement plane
License requirements: None.
- placementSide() - Method in interface nxopen.features.shipdesign.OrientationDefinitionBuilder
-
Returns the side of the placement faces the stiffener is to be placed upon.
- PlacementSolution - Interface in nxopen.placement
-
- PlacementSolutionsBuilder - Interface in nxopen.routing
-
- placementSpacing() - Method in interface nxopen.features.sheetmetal.GussetBuilder
-
Returns the placement spacing
Only use this option to edit gussets created prior to NX10.
- placementType() - Method in interface nxopen.drawings.StandardViewsBuilder
-
- placementType() - Method in interface nxopen.features.sheetmetal.GussetBuilder
-
Returns the placement type
Only use this option to edit gussets created prior to NX10.
- placementType() - Method in interface nxopen.features.shipdesign.AlongGuideCutBuilder
-
Returns the method used to define the placement of the along guide cut
License requirements: None.
- placementType() - Method in interface nxopen.features.shipdesign.CornerCutBuilder
-
Returns the type of corner cut to create.
- placementType() - Method in interface nxopen.features.shipdesign.CustomBracketBuilder
-
Returns the method used to define the placement of the bracket
License requirements: None.
- placementType() - Method in interface nxopen.features.shipdesign.Cutout2Builder
-
Returns the placement type
License requirements: None.
- placementType() - Method in interface nxopen.features.shipdesign.ShipCutoutBuilder
-
Returns the placement type.
- placementType() - Method in interface nxopen.features.shipdesign.ShipEndCutBuilder
-
Returns the placement type
License requirements: None.
- placementType() - Method in interface nxopen.features.shipdesign.WeldCut2Builder
-
Returns the method used to define the placement of the weld cut
License requirements: None.
- placementType() - Method in interface nxopen.features.shipdesign.WeldCutBuilder
-
Returns the method used to define the placement of the weld cut
License requirements: None.
- placementValue() - Method in interface nxopen.ame.InstantiateTemplateBulkBuilder
-
Returns the placement type
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- placeMultipleElbows(CharacteristicList, String, int, int, boolean, CharacteristicList, CharacteristicList) - Method in interface nxopen.routing.PlaceElbowsBuilder
-
Place Multiple Elbows
License requirements: routing_pipetube ("Routing Piping and Tubing")
.
- PlacePartBuilder - Interface in nxopen.routing
-
- PlacePartBuilder.LoadedPartInfoData - Class in nxopen.routing
-
- placePostPlacementParts(Component, CharacteristicList) - Method in interface nxopen.routing.RouteManager
-
Places post placement parts based on the postPartCharx
CharacteristicList
on the placedPart object.
- placeProductInActiveCabinet(String, Point3d, AMEEngObject, NXObject) - Method in interface nxopen.ame.CabinetRoot
-
Places the product in active cabinet
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- placer - Variable in class nxopen.routing.electrical.ConnectorDevice.FindPlacerData
-
- placerPos - Variable in class nxopen.routing.electrical.ConnectorDevice.FindPlacerData
-
- places - Variable in class nxopen.uf.UFRoute.SolvePlacesData
-
- placeSymbol(UFDrf.SymbolCreateData, boolean, boolean) - Method in interface nxopen.uf.UFDrf
-
- PLAIN - Static variable in class nxopen.annotations.LeaderData.LeaderType
-
Plain leader style
- PLAIN - Static variable in class nxopen.annotations.LeaderType
-
- PLAIN - Static variable in class nxopen.annotations.LineWeldBuilder.FieldWeldType
-
- PLAIN - Static variable in class nxopen.annotations.LineWeldBuilder.IdLineType
-
- PLAIN - Static variable in class nxopen.display.Background.Type
-
single color background
- PLAIN - Static variable in class nxopen.preferences.SessionSketch.BackgroundType
-
Sketch background color is forced to the plain background color
- PLAIN - Static variable in class nxopen.tooling.MWMoldedPartValidationBuilder.RangeType
-
range limit values defined by tolerances
- PLAIN_ALIGNED - Static variable in class nxopen.annotations.LeaderType
-
- PLAIN_NOSTUB - Static variable in class nxopen.annotations.LeaderType
-
- PLAIN_WITHOUT_STUB - Static variable in class nxopen.annotations.LeaderData.LeaderType
-
Plain leader style with no stub
- PLANAR - Static variable in class nxopen.annotations.ToleranceZoneShape
-
Specifies planar zone shape
- PLANAR - Static variable in class nxopen.cae.DurabilityStrainGageAnalyzerBuilder.GageConstructionEnum
-
Planar
- PLANAR - Static variable in class nxopen.die.QuickBinderBuilder.Types
-
planar
- PLANAR - Static variable in class nxopen.die.QuickBinderWrapBuilder.Types
-
Planar
- PLANAR - Static variable in class nxopen.display.IrayPlusSimpleMaterialEditorBuilder.TextureSpace
-
- PLANAR - Static variable in class nxopen.Face.FaceType
-
Planar face
- PLANAR - Static variable in class nxopen.facet.FacetedFace.FacetedfaceType
-
Planar face
- PLANAR - Static variable in class nxopen.features.sheetmetal.FlexibleCableBuilder.SegmentTypeOptions
-
Planar cable segment.
- PLANAR - Static variable in class nxopen.features.subdivision.SubdivisionExtrudeCageBuilder.ScalingMethodType
-
Scale in the plane normal to specified direction
- PLANAR - Static variable in class nxopen.features.subdivision.SubdivisionProjectCageBuilder.ModeOptions
-
Fit a plane
- PLANAR - Static variable in class nxopen.features.subdivision.TransformCageData.ScalingMethodType
-
Scale in the plane normal to specified direction
- PLANAR - Static variable in class nxopen.features.TextBuilder.Types
-
Placement on a plane
- PLANAR - Static variable in class nxopen.features.vehicledesign.MirrorCertificationBuilder.MirrorSurfaceType
-
Represents the planar mirror surface
- PLANAR - Static variable in class nxopen.motion.JointDefine.Type
-
This joint type allows a single rotation
and two translations.
- PLANAR_AT_ANGLE - Static variable in class nxopen.features.shipdesign.OrientationRegionItemBuilder.OrientationMethodTypes
-
The web of the profile is planar with respect to the defined direction.
- PLANAR_CROSS_SECTION - Static variable in class nxopen.uf.UFGdt.GeometricDefinitionType
-
- PLANAR_JOINT - Static variable in class nxopen.uf.UFMotion.JointType
-
- PLANAR_ORIENTATION - Static variable in class nxopen.uf.UFGdt.GeometricDefinitionType
-
- PLANAR_PATTERN - Static variable in class nxopen.tooling.ReusePositioningObjectBuilder.Types
-
planar type
- PLANAR_PATTERN_CIRCULAR - Static variable in class nxopen.tooling.ReusePositioningObjectBuilder.SubTypes
-
circular type
- PLANAR_PATTERN_LINEAR - Static variable in class nxopen.tooling.ReusePositioningObjectBuilder.SubTypes
-
linear type
- planarFrame() - Method in interface nxopen.features.TextBuilder
-
Returns the planar frame
License requirements: None.
- PLANARIZE - Static variable in class nxopen.features.StudioXformBuilderEx.Types
-
Planarize type of Xform
- PLANARIZE_ROW_OF_POLES - Static variable in class nxopen.features.StudioXformBuilder.Types
-
Deprecated.
Planarize type of Xform
- planarizeArbitraryPlane() - Method in interface nxopen.features.StudioXformBuilder
-
- planarizeArbitraryPlane() - Method in interface nxopen.features.StudioXformBuilderEx
-
Returns the planarize arbitrary plane
License requirements: None.
- planarizeDirection() - Method in interface nxopen.features.StudioXformBuilder
-
- planarizeDirection() - Method in interface nxopen.features.StudioXformBuilderEx
-
Returns the planarize direction
License requirements: None.
- planarizeMethod() - Method in interface nxopen.features.StudioXformBuilder
-
- planarizeMethod() - Method in interface nxopen.features.StudioXformBuilderEx
-
Returns the planarize method
License requirements: None.
- planarizePlaneOption() - Method in interface nxopen.features.StudioXformBuilder
-
- planarizeProjectionPlane() - Method in interface nxopen.features.StudioXformBuilderEx
-
Returns the planarize projection plane
License requirements: None.
- PlanarJoint - Interface in nxopen.mechatronics
-
Represents the Planar Joint.
- PlanarJointBuilder - Interface in nxopen.mechatronics
-
- PlanarJointCollection - Interface in nxopen.mechatronics
-
Represents a collection of Planar Joint.
- planarJoints() - Method in interface nxopen.mechatronics.PhysicsManager
-
- PlanarMilling - Interface in nxopen.cam
-
Represents a Planar Milling Operation
To create or edit an instance of this class, use
PlanarMillingBuilder
Created in NX7.5.0
- PlanarMillingBuilder - Interface in nxopen.cam
-
- planarOffsetHeight() - Method in interface nxopen.die.SteelInsertSectionBuilder
-
Returns the planar contact height of the steel insert casting
License requirements: ug_die_design ("Die Design")
.
- PlanarOperation - Interface in nxopen.cam
-
Represents a Planar operation
To create or edit an instance of this class, use
PlanarOperationBuilder
Created in NX7.5.0
- PlanarOperationBuilder - Interface in nxopen.cam
-
Represents a PlanarOperation Builder
This is an abstract class and cannot be instantiated.
- PlanarOperationBuilder.AutomaticPartBoundaryMethodTypes - Class in nxopen.cam
-
Available types for automatic part boundary method in planar mill operation
- planarRadiusLimit() - Method in interface nxopen.features.shipdesign.RollingLineBuilder
-
Returns the maximum radius on the surface to be considered non-planar.
- planarRef - Variable in class nxopen.uf.UFGdt.ToleranceZone
-
- planarReflectionToggle() - Method in interface nxopen.display.TrueShadingBuilder
-
Returns the planar reflection visibility toggle
License requirements: None.
- PlanarSegmentCurveTypeDisplayData() - Constructor for class nxopen.preferences.PartFlexiblePrintedCircuitDesign.PlanarSegmentCurveTypeDisplayData
-
- PlanarSegmentCurveTypeDisplayData(PartFlexiblePrintedCircuitDesign.PlanarSegmentCurveType, int, NXColor, DisplayableObject.ObjectFont, DisplayableObject.ObjectWidth) - Constructor for class nxopen.preferences.PartFlexiblePrintedCircuitDesign.PlanarSegmentCurveTypeDisplayData
-
Constructor for the PlanarSegmentCurveTypeDisplayData object.
- planarShadowToggle() - Method in interface nxopen.display.TrueShadingBuilder
-
Returns the planar shadow visibility toggle
License requirements: None.
- PlanarShipGrid - Interface in nxopen.display
-
Represents a planar ship grid.
- PlanarShipGridBuilder - Interface in nxopen.display
-
- PlanarShipGridBuilder.ExtentData - Class in nxopen.display
-
- PlanarShipGridBuilder.IntersectOption - Class in nxopen.display
-
Settings that indicate how to search for objects that intersect the plane.
- PlanarShipGridBuilder.LabelDisplayOption - Class in nxopen.display
-
Settings that indicate what grid lines should be labelled.
- planarSurfacePreferred() - Method in interface nxopen.features.GuidedExtensionBuilderEx
-
Returns the option to create planar surface when possible
License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_2 ("advanced freeform modeling") OR ug_mold_design ("UG MOLD") OR die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- planarTolerance() - Method in interface nxopen.features.ExtrudeBuilder
-
Returns the planar tolerance
License requirements: None.
- plane() - Method in interface nxopen.annotations.OriginBuilder
-
Returns the plane
License requirements: None.
- plane() - Method in interface nxopen.annotations.PmiBoltCircleCenterlineBuilder
-
Returns the plane for the creation of center mark
License requirements: None.
- plane() - Method in interface nxopen.annotations.PmiCenterMarkBuilder
-
Returns the plane for the creation of center mark
License requirements: None.
- plane() - Method in interface nxopen.annotations.RegionBuilder
-
Returns the plane
License requirements: None.
- plane() - Method in interface nxopen.cae.ElementReflectBuilder
-
Returns the plane of reflection
License requirements: None.
- plane() - Method in interface nxopen.cae.NodeReflectBuilder
-
Returns the plane
License requirements: None.
- plane - Variable in class nxopen.cae.Post.Clipping
-
- PLANE - Static variable in class nxopen.cae.PrimitiveRecipeMeshBuilder.Type
-
Plane Primitive
- plane() - Method in interface nxopen.cae.responsesimulation.StrainGageBuilder
-
Returns the orientation plane type of strain gage
License requirements: nx_response_anlys ("NX Response Analysis")
.
- plane() - Method in interface nxopen.cam.BoundarySet
-
Returns the boundary plane
License requirements: None.
- PLANE - Static variable in class nxopen.cam.CamInspectionOperationFeaturetypes
-
Plane
- PLANE - Static variable in class nxopen.cam.DrillSurfaceBuilder.SurfaceType
-
plane
- PLANE - Static variable in class nxopen.cam.InspectionAlignmentAssistantBuilder.FeatureType
-
Plane alignment feature type
- PLANE - Static variable in class nxopen.cam.InspectionConstructedFeatureBuilder.ConstFeatType
-
Constructed Plane Feature
- PLANE - Static variable in class nxopen.cam.InspectionMethodBuilder.MethodTypes
-
Plane
- plane() - Method in interface nxopen.cam.InspectionOperationTransformBuilder
-
Returns the mirror plane
License requirements: None.
- PLANE - Static variable in class nxopen.cam.LowerLimit.ModeTypes
-
plane
- plane() - Method in interface nxopen.cam.LowerLimit
-
Returns the Lower Limit Plane
License requirements: None.
- PLANE - Static variable in class nxopen.cam.MillOrientGeomBuilder.LowerLimitModes
-
lower limit mode: Plane
- plane() - Method in interface nxopen.cam.MirrorBuilder
-
Returns the mirror plane
License requirements: None.
- PLANE - Static variable in class nxopen.cam.NcmClearanceBuilder.ClearanceTypes
-
clearance plane
- PLANE - Static variable in class nxopen.cam.NcmPlanarEngRetBuilder.MeasureHeightFrom
-
Measure from user-defined plane
- plane() - Method in interface nxopen.cam.NcmPlanarEngRetBuilder
-
Returns the engage/retract plane,plane entity type covers Xform and Plane
License requirements: None.
- PLANE - Static variable in class nxopen.cam.NcmScEngRetBuilder.MeasureFromTypes
-
Measure from user-defined plane
- plane() - Method in interface nxopen.cam.NcmScEngRetBuilder
-
Returns the engage/retract plane
License requirements: None.
- plane() - Method in interface nxopen.cam.OperationTransformBuilder
-
Returns the mirror plane
License requirements: None.
- PLANE - Static variable in class nxopen.cam.SplitSubopCommand.Types
-
Divide by Plane
- PLANE - Static variable in class nxopen.cam.ToolPathEditorBuilder.TrimGeometryType
-
- PLANE - Static variable in class nxopen.cam.ToolPathSplitParametersBuilder.TransferTypes
-
local plane transfer type
- plane() - Method in interface nxopen.die.DieLocationBuilder
-
Returns the specified plane
License requirements: None.
- PLANE - Static variable in class nxopen.die.DiePlaneBuilder.PlaneType
-
Define the plane to be used.
- PLANE - Static variable in class nxopen.die.FillAreaBuilder.UpperLimitTypes
-
Upper limit is defined by a plane.
- plane() - Method in interface nxopen.die.FlangeSteelRibChildBuilder
-
Returns the plane of the Flange Steel Rib
License requirements: ug_die_design ("Die Design")
.
- plane() - Method in interface nxopen.die.HoleChildBuilder
-
Returns the plane of the die hole.
- plane() - Method in interface nxopen.die.KeywayChildBuilder
-
Returns the plane of the keyway.
- plane() - Method in interface nxopen.display.PlaneGridBuilder
-
Returns the plane
License requirements: None.
- plane() - Method in interface nxopen.drawings.AssociativeAngleBuilder
-
Returns the plane
License requirements: None.
- plane() - Method in interface nxopen.facet.ExtrudeFacetBodyBuilder
-
- plane() - Method in interface nxopen.facet.SnipFacetBodyBuilder
-
Returns the snipping plane
License requirements: None.
- plane() - Method in interface nxopen.features.AeroFlangeBuilder
-
Returns the plane
License requirements: None.
- plane() - Method in interface nxopen.features.AeroRibBuilder
-
Returns the plane
License requirements: None.
- PLANE - Static variable in class nxopen.features.AestheticFaceBlendBuilder.EndTrimObjectType
-
Overrides end trim object with plane.
- PLANE - Static variable in class nxopen.features.AestheticFaceBlendBuilder.StartTrimObjectType
-
Overrides start trim object with plane.
- plane() - Method in interface nxopen.features.EditCrossSectionBuilder
-
Returns the select plane.
- PLANE - Static variable in class nxopen.features.EmbossLimit.EndcapSourceOption
-
Indicates the geometry is datum plane.
- plane() - Method in interface nxopen.features.EmbossProjection
-
Returns the projection plane
License requirements: None.
- PLANE - Static variable in class nxopen.features.EmbossProjection.ProjectionOption
-
Indicates the geometry is datum plane.
- PLANE - Static variable in class nxopen.features.MatchedReferenceBuilder.Types
-
plane
- plane() - Method in interface nxopen.features.MirrorBodyBuilder
-
Returns the mirror plane
License requirements: None.
- plane() - Method in interface nxopen.features.MirrorFeatureBuilder
-
Returns the Mirror Plane
License requirements: None.
- plane() - Method in interface nxopen.features.PatternFaceBuilder
-
Returns the mirror plane of mirror pattern, don't use it until nx502
License requirements: None.
- PLANE - Static variable in class nxopen.features.PolylineBuilder.MovementMethodType
-
Movement in arbitrary plane
- plane() - Method in interface nxopen.features.ResizePlaneBuilder
-
Returns the plane
License requirements: None.
- plane() - Method in interface nxopen.features.SectionEditBuilder
-
Returns the sectioning plane for cutting section on a body
License requirements: None.
- plane() - Method in interface nxopen.features.sheetmetal.BridgeTransitionBuilder
-
Returns the tangential plane
Only use this option to edit feature created prior to NX12.
- plane() - Method in interface nxopen.features.sheetmetal.MultiBendBendPropertiesBuilder
-
Returns the plane
License requirements: None.
- plane() - Method in interface nxopen.features.sheetmetal.MultiFlangeBuilder
-
Returns the plane
License requirements: None.
- PLANE - Static variable in class nxopen.features.shipdesign.EndCutBuilder.LimitTypes
-
If this Limit Type is set, a Plane needs to be specified and the Tilt and Shear angles will be inferred from the intersection of Datum Plane with the body on which EndCut will be applied.
- plane() - Method in interface nxopen.features.shipdesign.EndCutBuilder
-
Returns the plane.
- plane() - Method in interface nxopen.features.shipdesign.PlaneListBuilder
-
Returns the plane defined.
- PLANE - Static variable in class nxopen.features.shipdesign.SplitProfilePlateBuilder.ToolOptionType
-
Select existing datum or face.
- PLANE - Static variable in class nxopen.features.StudioSplineBuilderEx.MovementMethodType
-
Movement in arbitrary plane
- PLANE - Static variable in class nxopen.features.StudioXformBuilderEx.MovementMethodType
-
Translate on a plane
- PLANE - Static variable in class nxopen.features.StudioXformBuilderEx.PlanarizeProjectionPlaneType
-
On arbitrary plane when planarize
- PLANE - Static variable in class nxopen.features.StudioXformBuilderEx.RotatingAxisType
-
Rotate on a plane
- PLANE - Static variable in class nxopen.features.StudioXformBuilderEx.ScalingDirectionType
-
Scale in plane direction
- plane() - Method in interface nxopen.features.subdivision.StartSymmetricModelingBuilder
-
Returns the plane
License requirements: None.
- PLANE - Static variable in class nxopen.features.subdivision.SubdivisionProjectCageBuilder.TargetTypes
-
- PLANE - Static variable in class nxopen.features.subdivision.TransformCageData.MovementMethodType
-
Movement in arbitrary plane
- plane() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the ground plane
License requirements: None.
- plane() - Method in interface nxopen.features.WrapBuilder
-
Returns the planar face or datum plane that the curves are being wrapped from or unwrapped to.
- PLANE - Static variable in class nxopen.geometricanalysis.DeviationGaugeBuilder.MeasurementMethodType
-
Plane
- plane() - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder
-
Returns the plane for measurement direction
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- plane() - Method in interface nxopen.geometricanalysis.DistanceAnalysisBuilder
-
Returns the reference plane for distance analysis.
- plane() - Method in interface nxopen.geometricanalysis.RadiusAnalysisBuilder
-
- plane() - Method in interface nxopen.geometricanalysis.sectionanalysis.SectionPlaneBuilder
-
Returns the plane type
License requirements: None.
- PLANE - Static variable in class nxopen.geometricanalysis.sectionanalysis.SectionPlaneBuilder.PlaneType
-
A user specifed plane
- PLANE - Static variable in class nxopen.geometricutilities.BlendSetbackBuilder.Directions
-
setback curve is the intersection curve between a plane and faces
- plane() - Method in interface nxopen.geometricutilities.BlendSetbackBuilder
-
Returns the setback plane.
- PLANE - Static variable in class nxopen.geometricutilities.CurveShapingBuilder.MovementMethodType
-
Movement in arbitrary plane
- PLANE - Static variable in class nxopen.geometricutilities.FacePlaneSelectionBuilder.TrimObjectType
-
plane end cap
- PLANE - Static variable in class nxopen.geometricutilities.MovePoleBuilder.MoveMethodType
-
- plane() - Method in interface nxopen.geometricutilities.MovePoleBuilder
-
Returns the plane
License requirements: None.
- plane() - Method in interface nxopen.geometricutilities.SpinePlaneBuilder
-
Returns the plane
License requirements: None.
- PLANE - Static variable in class nxopen.layout2d.CreateComponentFrom3DBuilder.CreateMethod
-
use plane
- plane() - Method in interface nxopen.mechanicalrouting.TransformBlockBuilder
-
Returns the plane setting.
- PLANE - Static variable in class nxopen.mechanicalrouting.TransformBlockBuilder.Transformtype
-
Plane allows you to move a point constrained to a specified plane.
- Plane - Interface in nxopen
-
Represents an
Plane
class.
- PLANE - Static variable in class nxopen.positioning.ConstraintReference.GeometryType
-
Plane
- PLANE - Static variable in class nxopen.preferences.SessionModeling.FreeFormConstructionResultType
-
Indicates the construction result option is plane
- plane() - Method in interface nxopen.SketchInPlaceBuilder
-
- PLANE - Static variable in class nxopen.tooling.FaceSplitBuilder.FaceSplitType
-
using plane for Split Face
- plane() - Method in interface nxopen.weld.JointmarkBuilder
-
Returns the plane used for mirror
License requirements: ugweld ("UG WELD")
.
- plane1() - Method in interface nxopen.drawings.ViewProjectionBuilder
-
Returns the plane 1
License requirements: None.
- plane1() - Method in interface nxopen.features.sheetmetal.AdvancedFlangeBuilder
-
Returns the first plane for the end limits
License requirements: None.
- plane1() - Method in interface nxopen.features.shipdesign.PlanePairBuilder
-
Returns the first plane in the plane pair list element.
- plane1Left() - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder
-
Returns the left Plane 1 additional geometry.
- plane1LeftFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder
-
Returns the left Plane 1 additional geometry flag.
- plane1PointLeft() - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarWizardBuilder
-
Returns the left Plane 1 point.
- plane1PointRight() - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarWizardBuilder
-
Returns the right Plane 1 point.
- plane1Right() - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder
-
Returns the right Plane 1 additional geometry.
- plane1RightFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder
-
Returns the right Plane 1 additional geometry flag.
- plane2() - Method in interface nxopen.drawings.ViewProjectionBuilder
-
Returns the plane 2, if the type is set to one plane, the second plane information is ignored
License requirements: None.
- plane2() - Method in interface nxopen.features.sheetmetal.AdvancedFlangeBuilder
-
Returns the second plane for the end limits
License requirements: None.
- plane2() - Method in interface nxopen.features.shipdesign.PlanePairBuilder
-
Returns the second plane in the plane pair list element.
- plane5Left() - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder
-
Returns the left Plane 5 additional geometry.
- plane5LeftFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder
-
Returns the left Plane 5 additional geometry flag.
- plane5PointLeft() - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarWizardBuilder
-
Returns the left Plane 5 point.
- plane5PointRight() - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarWizardBuilder
-
Returns the right Plane 5 point.
- plane5Right() - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder
-
Returns the right Plane 5 additional geometry.
- plane5RightFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder
-
Returns the right Plane 5 additional geometry flag.
- PLANE_BOLT_HOLE_CIRCLE - Static variable in class nxopen.cam.InspectionAlignmentAssistantBuilder.AlignType
-
Plane, Bolt Hole Circle alignment type
- PLANE_CYLINDER_CYLINDER - Static variable in class nxopen.cam.InspectionAlignmentAssistantBuilder.AlignType
-
Plane, Cylinder, Cylinder alignment type
- PLANE_FEATURE - Static variable in class nxopen.uf.UFGdt.FeatureType
-
- PLANE_GEOM - Static variable in class nxopen.uf.UFBrep.GeomType
-
- PLANE_LINE_POINT - Static variable in class nxopen.cam.InspectionAlignmentAssistantBuilder.AlignType
-
Plane, Line, Point alignment type
- PLANE_MOVEMENT - Static variable in class nxopen.ame.MountingInterfaceBuilder.ReceptaclePolicy
-
- PLANE_OF_CURVE - Static variable in class nxopen.features.StudioXformBuilder.ScalingDirectionType
-
Deprecated.
Scale on Plane of curve
- PLANE_OF_CURVE - Static variable in class nxopen.geometricanalysis.CurveAnalysisCombsBuilder.DirectionOptionType
-
Deprecated.
best fit plane
- PLANE_OF_CURVE - Static variable in class nxopen.geometricanalysis.CurveAnalysisInflectionsBuilder.DirectionOptionType
-
Deprecated.
best fit plane
- PLANE_OF_CURVE - Static variable in class nxopen.geometricanalysis.CurveAnalysisPeaksBuilder.DirectionOptionType
-
Deprecated.
best fit plane
- PLANE_OF_CURVE - Static variable in class nxopen.geometricanalysis.CurveAnalysisRecord.DirectionOptionType
-
Deprecated.
best fit plane
- PLANE_PLANE_PLANE - Static variable in class nxopen.cam.InspectionAlignmentAssistantBuilder.AlignType
-
Plane, Plane, Plane alignment type
- PLANE_SYMMETRY - Static variable in class nxopen.cae.optimization.TBSShapeLinkCondition.ManufacturingOption
-
Plane symmetry referring to the plane which lies
perpendicular to the given axis of the coordinate system
- PLANE_SYMMETRY - Static variable in class nxopen.cae.optimization.TBSTopologyLinkCondition.SymmetryOption
-
Plane symmetry referring to the plane which lies
perpendicular to the given axis of the coordinate system
- PLANE_TYPE_LAST_ELEMENT - Static variable in class nxopen.uf.UFPath.PlaneType
-
- PLANE_TYPE_NONE - Static variable in class nxopen.uf.UFPath.PlaneType
-
- PLANE_TYPE_XY - Static variable in class nxopen.uf.UFPath.PlaneType
-
- PLANE_TYPE_XZ - Static variable in class nxopen.uf.UFPath.PlaneType
-
- PLANE_TYPE_YZ - Static variable in class nxopen.uf.UFPath.PlaneType
-
- PLANE_XY - Static variable in class nxopen.geometricutilities.TransformerData.ObjectType
-
- PLANE_XZ - Static variable in class nxopen.geometricutilities.TransformerData.ObjectType
-
- PLANE_YZ - Static variable in class nxopen.geometricutilities.TransformerData.ObjectType
-
- planeAngle() - Method in interface nxopen.tooling.DieEngTrimAngleCheckBuilder
-
Returns the plane angle
License requirements: None.
- planeAPoint() - Method in interface nxopen.features.vehicledesign.HeadImpactUpperRoofWizardBuilder
-
Returns the plane A point.
- planeAsString() - Method in interface nxopen.blockstyler.OrientXpress
-
Returns the Plane as string
License requirements: None.
- planeAutomatic() - Method in interface nxopen.features.shipdesign.ShellTemplateBuilder
-
Returns the planes specifying both the X and Y orientations of the templates.
- planeaxis - Variable in class nxopen.display.DynamicSectionBuilder.ActivePlaneData
-
- planeBPoint() - Method in interface nxopen.features.vehicledesign.HeadImpactUpperRoofWizardBuilder
-
Returns the plane B point.
- PlaneBuilder - Interface in nxopen.annotations
-
- PlaneBuilder.PlaneMethodType - Class in nxopen.annotations
-
method used to compute the annotation plane
- PlaneCollection - Interface in nxopen
-
Represents a collection of
Plane
.
- planeConstrainedToggle() - Method in interface nxopen.features.GeneralConicBuilder
-
Returns the plane constrained toggle.
- planeConstructor() - Method in interface nxopen.features.MirrorFeatureBuilder
-
Returns the plane constructor
License requirements: None.
- planeCoordinateSystem - Variable in class nxopen.cae.Post.Clipping
-
Any absolute or work
- planeCPoint() - Method in interface nxopen.features.vehicledesign.HeadImpactUpperRoofWizardBuilder
-
Returns the plane C point.
- planeDefine() - Method in interface nxopen.tooling.CalculateAreaBuilder
-
Returns the plane defined as the reference plane to calculate area, the type could be planar face, datum plane and plane.
- planeDPoint() - Method in interface nxopen.features.vehicledesign.HeadImpactUpperRoofWizardBuilder
-
Returns the plane D point.
- planeEid - Variable in class nxopen.uf.UFUi.SpecifyPlaneData
-
- PlaneEquationData() - Constructor for class nxopen.ConvergentFacet.PlaneEquationData
-
- PlaneGeometryData() - Constructor for class nxopen.display.DynamicSectionBuilder.PlaneGeometryData
-
- PlaneGrid - Interface in nxopen.display
-
Represents a grid on a bounded plane
Plane grids are not supported in KF.
- PlaneGridBuilder - Interface in nxopen.display
-
Represents the builder for adding a bounded grid
PlaneGrid
to a plane.
- planeGridToggle() - Method in interface nxopen.display.TrueShadingBuilder
-
Returns the shadow plane grid visibility toggle
License requirements: None.
- planeHeight() - Method in interface nxopen.weld.DatumCommonBuilder
-
Returns the plane height along the direction axis.
- planeHelpPoint() - Method in interface nxopen.geometricutilities.FacePlaneSelectionBuilder
-
Returns the user plane cap help point
License requirements: None.
- planeList() - Method in interface nxopen.features.shipdesign.StiffenerSystemBuilder
-
Returns the list of defined planes that define the path of the stiffener system.
- PlaneList - Interface in nxopen
-
Represents a list of objects.
- PlaneListBuilder - Interface in nxopen.features.shipdesign
-
This class is used to place a plane into a list.
- PlaneListBuilderList - Interface in nxopen.features.shipdesign
-
Represents a list of objects.
- planeLocation() - Method in interface nxopen.SketchAlongPathBuilder
-
Returns the plane location
License requirements: None.
- planeLocation() - Method in interface nxopen.weld.EasyPatternBuilder
-
Returns the plane location.
- planeMatrix - Variable in class nxopen.uf.UFBound.AllData
-
- planeMethod() - Method in interface nxopen.annotations.PlaneBuilder
-
Returns the plane method
License requirements: None.
- planeMethod() - Method in interface nxopen.features.shipdesign.ShellTemplateBuilder
-
- planeMethod() - Method in interface nxopen.weld.EasyPatternBuilder
-
Returns the plane method.
- planemetrices - Variable in class nxopen.display.DynamicSectionBuilder.AllPlanesGeometryData
-
- planenormal - Variable in class nxopen.cae.SetManager.TargetSetPlaneData
-
plane's normal
- planenormal - Variable in class nxopen.cae.SetManager.TargetSetPlaneWithOffsetData
-
plane's normal
- planenormal - Variable in class nxopen.ConvergentFacet.PlaneEquationData
-
The plane unit normal for the facet.
- planeNormal() - Method in interface nxopen.geometricutilities.SectionPlaneData
-
Returns the normal of the plane
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- planenormal - Variable in class nxopen.routing.EditBendAngleBuilder.SelectedBendData
-
The normal of the plane the arc lies in.
- planeNormal - Variable in class nxopen.uf.UFFacet.AskPlaneEquationData
-
- planeNormal - Variable in class nxopen.uf.UFModeling.AskPlaneData
-
- PlaneNormalOrientation - Class in nxopen
-
Specifies the orientation of a plane's normal .
- PLANEOF_CURVE - Static variable in class nxopen.features.StudioXformBuilderEx.ScalingDirectionType
-
Scale on Plane of curve
- planeOfCurve - Variable in class nxopen.uf.UFCurve.LineArc
-
- planeOffset() - Method in interface nxopen.die.HoleChildBuilder
-
Returns the plane offset of the die hole.
- planeOffset() - Method in interface nxopen.die.HoleParentBuilder
-
Returns the plane offset of die holes.
- planeOffsetFixedToggle() - Method in interface nxopen.display.TrueShadingBuilder
-
Returns the shadow plane with fixed offset toggle
License requirements: None.
- planeOffsetValue() - Method in interface nxopen.display.TrueShadingBuilder
-
Returns the offset distance between the shadow plane and the nearest vertex of the displayed object
License requirements: None.
- planeOption() - Method in interface nxopen.drawings.ViewProjectionPlaneBuilder
-
Returns the plane option, decide how to get the plane
License requirements: None.
- planeOption() - Method in interface nxopen.features.MirrorCurveBuilder
-
Returns the plane option
License requirements: None.
- planeOption() - Method in interface nxopen.features.MirrorFeatureBuilder
-
Returns the plane option
License requirements: None.
- planeOption() - Method in interface nxopen.geometricutilities.MirrorPattern
-
Returns the plane option
License requirements: None.
- planeOption() - Method in interface nxopen.geometricutilities.OrientXpressBuilder
-
Returns the orientXpress active plane option
License requirements: None.
- planeOption() - Method in interface nxopen.SketchInPlaceBuilder
-
Returns the attachment plane option (existing plane, new plane, new csys)
License requirements: None.
- planeOrFace() - Method in interface nxopen.SketchInPlaceBuilder
-
- planeOrientation() - Method in interface nxopen.features.shipdesign.RollingLineBuilder
-
- planeOrientation() - Method in interface nxopen.SketchAlongPathBuilder
-
Returns the plane orientation type
License requirements: None.
- planeOrientationAxis() - Method in interface nxopen.SketchAlongPathBuilder
-
Returns the plane orientation axis for one of the types of "Normal to Vector", "Parallel to Vector" and "Through Axis"
License requirements: None.
- planeOrigin() - Method in interface nxopen.geometricutilities.SectionPlaneData
-
Returns the origin of the plane
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- planeorigins - Variable in class nxopen.display.DynamicSectionBuilder.AllPlanesGeometryData
-
- planeOverlapLogic() - Method in interface nxopen.assemblies.PlaneSearchTermBuilder
-
Returns
the plane overlap logic.
- PlanePairBuilder - Interface in nxopen.features.shipdesign
-
This class is used to define a pair of planes in a list.
- planePairList() - Method in interface nxopen.features.shipdesign.StiffenerSystemBuilder
-
Returns the list of pairs of planes that generate points on the ship structure to define the path of the stiffener system.
- planePoint1() - Method in interface nxopen.geometricutilities.SectionPlaneData
-
Returns the first point of the plane
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- planePoint2() - Method in interface nxopen.geometricutilities.SectionPlaneData
-
Returns the second point of the plane
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- planeposition - Variable in class nxopen.cae.SetManager.TargetSetPlaneData
-
plane's position
- planeposition - Variable in class nxopen.cae.SetManager.TargetSetPlaneWithOffsetData
-
plane's position
- planeReference() - Method in interface nxopen.SketchInPlaceBuilder
-
Returns the placement plane for sketch
License requirements: None.
- planes() - Method in interface nxopen.BasePart
-
Return a collection of Planes .
- PLANES - Static variable in class nxopen.cam.InspectionPatternFeatureBuilder.FeatureFilterTypes
-
Only plane inspection features will be listed
- PLANES - Static variable in class nxopen.features.DraftBodyBuilder.RepairOption
-
Repair concave miter corners with planes
- PLANES - Static variable in class nxopen.features.shipdesign.DeckBuilder.Types
-
Mold face is being defined by selected or defined planes.
- PLANES - Static variable in class nxopen.features.shipdesign.GenericPlateSystemBuilder.Types
-
Mold face is being defined by selected or defined planes.
- PLANES - Static variable in class nxopen.features.shipdesign.LongitudinalBulkheadBuilder.Types
-
Mold face is being defined by selected or defined planes.
- planes() - Method in interface nxopen.features.shipdesign.StiffenerSystemBuilder
-
Returns the planes selected that define the path of the stiffener system.
- PLANES - Static variable in class nxopen.features.shipdesign.StiffenerSystemBuilder.PointMethods
-
- PLANES - Static variable in class nxopen.features.shipdesign.StiffenerSystemBuilder.Types
-
- PLANES - Static variable in class nxopen.features.shipdesign.TransverseBulkheadBuilder.Types
-
Mold face is being defined by selected or defined planes.
- planes - Variable in class nxopen.uf.UFCurve.SectionPlanesData
-
- PLANES_AND_POINT - Static variable in class nxopen.features.shipdesign.CustomBracketBuilder.CreationMethod
-
- PLANES_AT_ANGLES - Static variable in class nxopen.cam.SpunOutlineGeom.CreationTypes
-
spun outline created by specifying planes at angles
- PLANES_THROUGH_POINTS - Static variable in class nxopen.cam.SpunOutlineGeom.CreationTypes
-
spun outline created by specifying planes through points
- PlanesAtAnglesData() - Constructor for class nxopen.cam.SpunOutlineGeom.PlanesAtAnglesData
-
- planesData - Variable in class nxopen.uf.UFCurve.SectionAskPlanesData
-
- PlaneSearchTerm - Interface in nxopen.assemblies
-
- PlaneSearchTerm.PlaneOverlapLogicType - Class in nxopen.assemblies
-
Logic used to determine the type of inclusion used in a plane search term within a recipe.
- PlaneSearchTermBuilder - Interface in nxopen.assemblies
-
- planesList() - Method in interface nxopen.features.WrapGeometryBuilder
-
Returns the Planes to split the geometry, tightens the wrap along this plane
License requirements: None.
- planesList() - Method in interface nxopen.sim.SinumerikCaSimplifyBodiesBuilder
-
Returns the Planes to split the geometry, tightens the wrap along this plane
License requirements: None.
- PlanesThroughPointsData() - Constructor for class nxopen.cam.SpunOutlineGeom.PlanesThroughPointsData
-
- planeToProjectTo() - Method in interface nxopen.features.ProjectCurveBuilder
-
Returns the plane to project to
License requirements: None.
- planeToRestrictMotion() - Method in interface nxopen.drafting.CutCopyPasteBuilder
-
Returns the plane to restrict motion
License requirements: None.
- planeType() - Method in interface nxopen.cam.BoundarySet
-
Returns the boundary plane type
License requirements: None.
- planeType() - Method in interface nxopen.features.shipdesign.SectionViewBuilder
-
Returns the frame type
License requirements: None.
- planeType - Variable in class nxopen.uf.UFCambnd.BoundaryData
-
- planeType - Variable in class nxopen.uf.UFCurve.SectionCurveAskParentsData
-
- planeType - Variable in class nxopen.uf.UFPath.Cutcom
-
- planeType() - Method in interface nxopen.weld.WeldLabelBuilder
-
Returns the plane type.
- planeType() - Method in interface nxopen.weld.WeldPmiBuilder
-
Returns the plane type.
- PlaneTypes - Interface in nxopen
-
- PlaneTypes.AlternateType - Class in nxopen
-
Represents the alternate solutions.
- PlaneTypes.FrenetSubtype - Class in nxopen
-
Specify the subtypes for on_curve type of plane, where alternate solution is not
enough to handle the situation after enhancement to this specific plane type.
- PlaneTypes.MethodType - Class in nxopen
-
Specifies different method types of selected geometries
- planeView() - Method in interface nxopen.tooling.StandardPartPositionBuilder
-
Sets the view to the selected face plane or X-Y plane of WCS.
- planeWidth() - Method in interface nxopen.weld.DatumCommonBuilder
-
Returns the plane width perpendicular to the direction axis.
- planeX() - Method in interface nxopen.display.DynamicSectionBuilder
-
Creates a plane along X direction.
- planeXform() - Method in interface nxopen.cam.NcmClearanceBuilder
-
Returns the clearance plane,plane entity type covers Xform and Plane
License requirements: None.
- planeY() - Method in interface nxopen.display.DynamicSectionBuilder
-
Creates a plane along Y direction.
- planeZ() - Method in interface nxopen.display.DynamicSectionBuilder
-
Creates a plane along Z direction.
- PLANT - Static variable in class nxopen.linedesigner.CreateFactoryElementBuilder.TypeAPI
-
Represents the Plant type
- PLANT - Static variable in class nxopen.linedesigner.DBFactoryNode.NodeType
-
- PlantInput - Interface in nxopen.motion
-
Represents a Plant Input motion object
To create or edit an instance of this class, use
PlantInputBuilder
Created in NX6.0.0
- PlantInputBuilder - Interface in nxopen.motion
-
- PlantInputCollection - Interface in nxopen.motion
-
Represents a collection of Plant Input objects
To obtain an instance of this class, refer to
MotionManager
Created in NX6.0.0
- plantInputs() - Method in interface nxopen.motion.MotionManager
-
- PlantOutput - Interface in nxopen.motion
-
Represents a Plant Output motion object
To create or edit an instance of this class, use
PlantOutputBuilder
Created in NX6.0.0
- PlantOutputBuilder - Interface in nxopen.motion
-
- PlantOutputBuilder.Poutype - Class in nxopen.motion
-
the type enum
- PlantOutputCollection - Interface in nxopen.motion
-
Represents a collection of Plant Output objects
To obtain an instance of this class, refer to
MotionManager
Created in NX6.0.0
- plantOutputs() - Method in interface nxopen.motion.MotionManager
-
- PlantProductionUnitCreatorBuilder - Interface in nxopen.linedesigner
-
To create a new instance of this class, use nxopen.linedesigner.LineDesignerManager#plantCreateProductionUnitCreatorBuilder
Created in NX12.0.0
- PlanViewManager - Interface in nxopen.linedesigner
-
Represents a singleton JA for PlanViewManager
To create a new instance of this class, use nxopen.linedesigner.LineDesignerManager#createPlanViewManagerInstance
Created in NX9.0.0
- plasManager() - Method in interface nxopen.Part
-
Returns the PlasManager instance belonging to this part .
- PlasManager - Interface in nxopen.plas
-
A manager to deal with all objects.
- PLASTIC_COLORWASH - Static variable in class nxopen.display.TrueStudioBuilder.GlobalMaterial
-
Uses the object's color with plastic material characteristics.
- PLASTIC_ELEM_RESULTANT_STRAIN_BEAM - Static variable in class nxopen.cae.Result.Quantity
-
- PLASTIC_ELEM_RESULTANT_STRAIN_SHELL - Static variable in class nxopen.cae.Result.Quantity
-
- PLASTIC_ELEM_RESULTANT_STRAIN_SPRING_DASHPOT - Static variable in class nxopen.cae.Result.Quantity
-
- PLASTIC_STRAIN - Static variable in class nxopen.cae.Result.Quantity
-
- PLASTIC_STRAIN_AT_ELEMENT_INTEGRATION_POINT - Static variable in class nxopen.cae.Result.Quantity
-
- PLASTIC_STRAIN_VON_MISES - Static variable in class nxopen.cae.Result.Quantity
-
- PLASTICINE - Static variable in class nxopen.display.TrueStudioBuilder.GlobalMaterial
-
Overrides the object color with a plasticine material display.
- PLASTICS - Static variable in class nxopen.PhysicalMaterial.Category
-
Plastics
- PLATE - Static variable in class nxopen.cae.xyplot.GraphStyle
-
Deprecated in NX12.0
- PLATE - Static variable in class nxopen.drawings.ShipbuildingLinesViewStyle.ShipbuildingLines
-
Plate
- PLATE - Static variable in class nxopen.features.shipdesign.CornerCutBuilder.CutOption
-
Create corner cut for all corner points of the mold face of plate body
- Plate - Interface in nxopen.features.shipdesign
-
Represents a plate feature
To create or edit an instance of this class, use
PlateBuilder
Created in NX8.0.0
- PLATE - Static variable in class nxopen.features.shipdesign.ProfileBuilder.SectionOption
-
- PLATE - Static variable in class nxopen.features.shipdesign.ShipnamesBuilderType
-
- PLATE - Static variable in class nxopen.features.shipdesign.StiffenerStockBuilder.StockSectionType
-
Plate Stock
- PLATE - Static variable in class nxopen.features.shipdesign.SubSystemsBuilder.Types
-
Plate system, any system using plate stock.
- PLATE - Static variable in class nxopen.preferences.ShipbuildingLinesViewPreferences.ShipbuildingLines
-
Plate
- PLATE_DIVIDE - Static variable in class nxopen.features.shipdesign.ShipPreparationInfo.Types
-
The data represents a plate divide feature.
- PLATE_EIGHT - Static variable in class nxopen.tooling.DieBaseBuilder.PlatesNumberOpt
-
plates number is 8
- PLATE_FIVE - Static variable in class nxopen.tooling.DieBaseBuilder.PlatesNumberOpt
-
plates number is 5
- PLATE_NINE - Static variable in class nxopen.tooling.DieBaseBuilder.PlatesNumberOpt
-
plates number is 9
- PLATE_TEN - Static variable in class nxopen.tooling.DieBaseBuilder.PlatesNumberOpt
-
plates number is 10
- PLATE_TWELVE - Static variable in class nxopen.tooling.DieBaseBuilder.PlatesNumberOpt
-
plates number is 12
- plateBodyCollector() - Method in interface nxopen.features.shipdesign.CornerCutBuilder
-
Returns the collector containing the plate bodies that are to have corner cuts added.
- plateBoundariesSelection() - Method in interface nxopen.routing.PlatformCreatorBuilder
-
Returns the platform part boundaries section
License requirements: routing_platform ("Routing Platform")
.
- PlateBoundaryOptionBuilder - Interface in nxopen.features.shipdesign
-
- PlateBoundaryOptionBuilder.BoundaryTypes - Class in nxopen.features.shipdesign
-
The plate boundary types.
- PlateBoundaryOptionBuilder.SplitKnuckleTypes - Class in nxopen.features.shipdesign
-
The split knuckle edge types.
- PlateBoundaryOptionBuilder.TrimTypes - Class in nxopen.features.shipdesign
-
The plate boundary trim types.
- PlateBoundaryOptionBuilderList - Interface in nxopen.features.shipdesign
-
Represents a list of objects.
- plateBoundaryOptionList() - Method in interface nxopen.features.shipdesign.PlateBuilder
-
Returns the build boundary option builder list
License requirements: None.
- PlateBuilder - Interface in nxopen.features.shipdesign
-
Represents a
Plate
builder.
- PlateBuilder.BodyTypes - Class in nxopen.features.shipdesign
-
Settings to indicate the plate output body type.
- PlateBuilder.RegionOptions - Class in nxopen.features.shipdesign
-
Settings to indicate what areas to create the plate when using body faces as boundaries.
- PlateBuilder.TightnessOptions - Class in nxopen.features.shipdesign
-
Settings to indicate what tightness to create the plate.
- PlateBuilder.Types - Class in nxopen.features.shipdesign
-
Settings to indicate how the plate is generated.
- PlateChamfer - Interface in nxopen.features.shipdesign
-
Represents a plate chamfer feature
To create or edit an instance of this class, use
PlateChamferBuilder
Created in NX8.0.0
- PlateChamferBuilder - Interface in nxopen.features.shipdesign
-
- PlateChamferBuilder.AngleMethod - Class in nxopen.features.shipdesign
-
The option to specify the method for defining angle or ratio.
- PlateChamferBuilder.OffsetMethod - Class in nxopen.features.shipdesign
-
The option to specify the method for chamfer offset method.
- PlateChamferBuilder.Types - Class in nxopen.features.shipdesign
-
The option for the type of associativity for chamfer.
- plateClearanceEighth() - Method in interface nxopen.tooling.ClearanceManagementBuilder
-
Returns the plate clearance eighth.
- plateClearanceFifth() - Method in interface nxopen.tooling.ClearanceManagementBuilder
-
Returns the plate clearance fifth.
- plateClearanceFirst() - Method in interface nxopen.tooling.BurringInsertBuilder
-
Returns the value of plate clearance first.
- plateClearanceFirst() - Method in interface nxopen.tooling.ClearanceManagementBuilder
-
Returns the plate clearance first.
- plateClearanceFirst() - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder
-
Returns the plate clearance first
License requirements: None.
- plateClearanceFourth() - Method in interface nxopen.tooling.ClearanceManagementBuilder
-
Returns the plate clearance fourth.
- plateClearanceFourth() - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder
-
Returns the plate clearance fourth
License requirements: None.
- plateClearanceNinth() - Method in interface nxopen.tooling.ClearanceManagementBuilder
-
Returns the plate clearance ninth.
- plateClearanceSecond() - Method in interface nxopen.tooling.BurringInsertBuilder
-
Returns the value of plate clearance second.
- plateClearanceSecond() - Method in interface nxopen.tooling.ClearanceManagementBuilder
-
Returns the plate clearance second.
- plateClearanceSecond() - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder
-
Returns the plate clearance second
License requirements: None.
- plateClearanceSeventh() - Method in interface nxopen.tooling.ClearanceManagementBuilder
-
Returns the plate clearance seventh.
- plateClearanceSixth() - Method in interface nxopen.tooling.ClearanceManagementBuilder
-
Returns the plate clearance sixth.
- plateClearanceTenth() - Method in interface nxopen.tooling.ClearanceManagementBuilder
-
Returns the plate clearance tenth.
- plateClearanceThird() - Method in interface nxopen.tooling.BurringInsertBuilder
-
Returns the value of plate clearance third.
- plateClearanceThird() - Method in interface nxopen.tooling.ClearanceManagementBuilder
-
Returns the plate clearance third.
- plateClearanceThird() - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder
-
Returns the plate clearance third
License requirements: None.
- plateClosureType() - Method in interface nxopen.features.sheetmetal.EditCornerBuilder
-
Returns the plate type
License requirements: None.
- PlateColorOption - Class in nxopen.cae.xyplot
-
Represents the plate filling color option
- PlateDivide - Interface in nxopen.features.shipdesign
-
Represents a plate divide feature
To create or edit an instance of this class, use
PlateDivideBuilder
Created in NX11.0.0
- PlateDivideBuilder - Interface in nxopen.features.shipdesign
-
Represents a
PlateDivide
builder which is used to edit
a plate divide feature.
- plateGap() - Method in interface nxopen.features.sheetmetal.EditCornerBuilder
-
Returns the gap value between plates
License requirements: None.
- plateHeight() - Method in interface nxopen.features.shipdesign.ProfileBuilder
-
Returns the plate height
License requirements: None.
- plateHeight() - Method in interface nxopen.features.shipdesign.StiffenerStockBuilder
-
Returns the plate height
License requirements: None.
- plateLength() - Method in interface nxopen.tooling.DieBaseBuilder
-
Returns the plate length value.
- PlatePreparation - Interface in nxopen.features.shipdesign
-
Represents a ship plate preparation feature
To create or edit an instance of this class, use
PlatePreparationBuilder
Created in NX8.0.0
- PlatePreparationBuilder - Interface in nxopen.features.shipdesign
-
- plates() - Method in interface nxopen.features.shipdesign.PinJigBuilder
-
Returns the plates to position on the Pinijg.
- plateSize() - Method in interface nxopen.features.shipdesign.SteelCollarPlateBuilder
-
Returns the plate size.
- platesNumber() - Method in interface nxopen.tooling.DieBaseBuilder
-
Returns the user defined plates number.
- plateStock() - Method in interface nxopen.features.shipdesign.EditStockBuilder
-
Returns the plate stock builder, used to define the plate material, grade,
thickness, mass density, thicken option and opposite thickness.
- plateStock() - Method in interface nxopen.features.shipdesign.PlateBuilder
-
Returns the plate stock builder, which defines the plate material, grade, thickness, mass density, thicken option and opposite thickness.
- plateStock() - Method in interface nxopen.features.shipdesign.SeamBlockBuilder
-
Returns the plate stock builder, which defines the seam material, grade, and thickness
License requirements: None.
- PlateStockBuilder - Interface in nxopen.features.shipdesign
-
This builder allows you to define the stock information for plate system features in ship design.
- PlateStockBuilder.ThickenOptions - Class in nxopen.features.shipdesign
-
Settings to indicate how to apply the thickness to the mold face or offset mold face .
- PlateStockBuilder.ThicknessSourceOptions - Class in nxopen.features.shipdesign
-
Settings to indicate where the material thickness source resides.
- plateStockData() - Method in interface nxopen.features.shipdesign.StiffenerStockBuilder
-
Returns the plate stock data
License requirements: None.
- plateStockData() - Method in interface nxopen.features.shipdesign.SubSystemBuilder
-
Returns the plate sub system stock data.
- platesToExpand() - Method in interface nxopen.features.shipdesign.ExpansionDrawingBuilder
-
Returns the plates to be expanded
License requirements: None.
- PlateStyle2DSetting - Interface in nxopen.cae.xyplot
-
- PlateStyle3DSetting - Interface in nxopen.cae.xyplot
-
- PlateSystem - Interface in nxopen.features.shipdesign
-
Represents a Plate System feature.
- PlateSystemBuilder - Interface in nxopen.features.shipdesign
-
This class is used to create or edit the information shared between all the Basic Design plate system
features in the Ship Design application.
- PlateSystemBuilder.StiffenerDirectionType - Class in nxopen.features.shipdesign
-
Settings used to indicate the default primary and secondary stiffener direction.
- plateThicknessExponent() - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder
-
Returns the plate thickness exponent.
- plateThicknessRatio() - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder
-
Returns the plate thickness ratio.
- plateWIdth() - Method in interface nxopen.features.shipdesign.ProfileBuilder
-
Returns the plate width
License requirements: None.
- plateWidth() - Method in interface nxopen.tooling.DieBaseBuilder
-
Returns the plate width value.
- PLATFORM - Static variable in class nxopen.linedesigner.PlatformEquipmentBuilder.TypeAPI
-
- Platform - Interface in nxopen.routing
-
- PLATFORM_EQUIPMENT - Static variable in class nxopen.linedesigner.DBNode.NodeType
-
- PlatformCreatorBuilder - Interface in nxopen.routing
-
Builder for creating platform.
- PlatformCreatorBuilder.ReferenceType - Class in nxopen.routing
-
The grate orientation symbol reference
- PlatformEquipmentBuilder - Interface in nxopen.linedesigner
-
To create a new instance of this class, use nxopen.linedesigner.LineDesignerManager#createPlatformEquipmentBuilder
Default values.
- PlatformEquipmentBuilder.DeckingMaterialTypeAPI - Class in nxopen.linedesigner
-
This enum is providing possible deck material type
- PlatformEquipmentBuilder.DeckSupportTypeAPI - Class in nxopen.linedesigner
-
This enum is providing possible deck support types
- PlatformEquipmentBuilder.OutlineTypeAPI - Class in nxopen.linedesigner
-
This enum is providing possible outline types
- PlatformEquipmentBuilder.SideFromCenterlineTypeAPI - Class in nxopen.linedesigner
-
This enum is providing possible sides for centerline outline type
- PlatformEquipmentBuilder.TypeAPI - Class in nxopen.linedesigner
-
This enum is providing possible platform types
- PlatformFeature - Interface in nxopen.routing
-
Represents a Platform feature.
- PLAY - Static variable in class nxopen.cae.Post.AnimationControl
-
- play(boolean) - Method in interface nxopen.cam.PathDisplay
-
Animates the selected operation's tool path display.
- play() - Method in interface nxopen.features.FeatureReplayBuilder
-
Starts feature replay.
- play() - Method in interface nxopen.motion.AnimationControl
-
Animation play.
- play() - Method in interface nxopen.tooling.RunSimulationBuilder
-
Play simulation forwards
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- play() - Method in interface nxopen.tooling.UnfoldingSimulationBuilder
-
Play animation
License requirements: None.
- PLAY_ONCE - Static variable in class nxopen.geometricutilities.PlayButtonsBuilder.PlayModeValues
-
- PLAY_ONCE - Static variable in class nxopen.motion.PlayMode
-
Play once mode
- playAnimation() - Method in interface nxopen.motion.LoadTransferControl
-
Plays animation
License requirements: mechanisms ("MECHANISMS")
.
- playbackAnimateToFrame(Tag, int, int) - Method in interface nxopen.uf.UFAssem
-
- playbackSeekToFrame(Tag, int) - Method in interface nxopen.uf.UFAssem
-
- playbackSequence(Tag, int) - Method in interface nxopen.uf.UFAssem
-
- playbackSpeed() - Method in interface nxopen.MovieSettingsBuilder
-
Returns the speed at which the recorded movie is played back.
- playBackward() - Method in interface nxopen.geometricutilities.PlayButtonsBuilder
-
TODO: fill in a description for this
License requirements: None.
- playBackward() - Method in interface nxopen.motion.AnimationControl
-
Animation play backward.
- playBackward() - Method in interface nxopen.sim.IsvControlPanelBuilder
-
Simulation Control Panel: Play Backward
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- playBackwards() - Method in interface nxopen.tooling.RunSimulationBuilder
-
Play simulation backwards
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- playButtons() - Method in interface nxopen.features.VarsweepBuilder
-
Returns the play buttons builder
License requirements: None.
- PlayButtonsBuilder - Interface in nxopen.geometricutilities
-
VCR buttons for any dialog that needs them .
- PlayButtonsBuilder.PlayModeValues - Class in nxopen.geometricutilities
-
the different play modes available
- playForward() - Method in interface nxopen.geometricutilities.PlayButtonsBuilder
-
TODO: fill in a description for this
License requirements: None.
- playForward() - Method in interface nxopen.sim.IsvControlPanelBuilder
-
Simulation Control Panel: Play Forward
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- PlayMode - Class in nxopen.motion
-
Definitions of post animation and spreadsheet run play mode type
- playMode() - Method in interface nxopen.motion.SpreadsheetRunControl
-
Returns the spreadsheet run play mode
License requirements: mechanisms ("MECHANISMS")
.
- playModes() - Method in interface nxopen.geometricutilities.PlayButtonsBuilder
-
Returns the play modes
License requirements: None.
- playToMachineTime(String) - Method in interface nxopen.sim.IsvControlPanelBuilder
-
Play to Machine Time
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- PLC_DATATYPES - Static variable in class nxopen.ame.ChildrenEvaluatorBuilder.FilterType
-
- plcBit() - Method in interface nxopen.sim.KinematicSinumerikCaBuilder
-
Returns the PLC bit for this protection area
License requirements: None.
- PlcBlock - Interface in nxopen.ame
-
Plc Block Node Journaling class
This is an abstract class.
- PlcCodePosition - Interface in nxopen.ame
-
Represents Plc Code Position Object
This object does not need a creator.
- PlcDataType - Class in nxopen.ame
-
Definition of the PLC data types
- PlcDataTypeSource - Class in nxopen.ame
-
Definition of the data type sources
- plcInitState() - Method in interface nxopen.sim.KinematicSinumerikCaBuilder
-
Returns the initial PLC state for this protection area
License requirements: None.
- PlcMemoryAreaBuilder - Interface in nxopen.ame
-
- PlcMethod - Interface in nxopen.ame
-
Plc Method Node Journaling class
This is an abstract class.
- PlcMethodBuilder - Interface in nxopen.ame
-
- PlcRule - Interface in nxopen.ame
-
PlcRule Journaling class
This object does not need a creator.
- PlcRule.RefObjectType - Class in nxopen.ame
-
type which discribed the context object
- PlcRule.ReplacementType - Class in nxopen.ame
-
type which defined wich object has to be replaced
- PlcRule.Type - Class in nxopen.ame
-
replace or insert rule Type.
- PLCSIMADV - Static variable in class nxopen.mechatronics.SignalMappingBuilder.AppOption
-
- plcSimAdvClient() - Method in interface nxopen.mechatronics.ExternalSignalConfigurationBuilder
-
Returns the PLCSIMAdv builder that holds the configuration for PLCSIMAdv clients.
- PlcSimAdvClientBuilder - Interface in nxopen.mechatronics
-
- PlcSimAdvClientBuilder.AreaType - Class in nxopen.mechatronics
-
Represents the plc signal area type.
- PlcSimAdvClientBuilder.InstanceNamesData - Class in nxopen.mechatronics
-
- PlcSimAdvClientBuilder.TagInfo - Class in nxopen.mechatronics
-
Represents PLCTag info definition structure.
- PlcSoftwareGenPort - Interface in nxopen.ame
-
PlcSoftwareGenPort Journaling class
This object does not need a creator.
- PlcSymbolBuilder - Interface in nxopen.ame
-
- plcSymbolInformation() - Method in interface nxopen.ame.AmeDebugSession
-
Prints PlcSymbol information
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- PlcSymbolsEvaluatorBuilder - Interface in nxopen.ame
-
- PlcSymbolsEvaluatorBuilder.FilterType - Class in nxopen.ame
-
choices for type filter, can either be tags, instance dbs, function blocks, functions, eplan macros, or all
- plcUsage() - Method in interface nxopen.sim.KinematicSinumerikCaBuilder
-
Returns the PLC usage for this protection area
License requirements: None.
- PlcVendorSymbolBuilder - Interface in nxopen.ame
-
- plies() - Method in interface nxopen.cae.LaminatePlyGroup
-
Returns the Ply collection of this group .
- plist() - Method in interface nxopen.UFSession
-
- plistMode - Variable in class nxopen.uf.UFPart.ImportPartModes
-
- PLM_CONVERSION - Static variable in class nxopen.cam.CAMObject.Attr
-
- PLM_FEEDCOMP - Static variable in class nxopen.cam.CAMObject.Attr
-
- PLM_FILLET - Static variable in class nxopen.cam.CAMObject.Attr
-
- PLM_GEOMETRY - Static variable in class nxopen.cam.CAMObject.Attr
-
- PLM_SLOWDOWN - Static variable in class nxopen.cam.CAMObject.Attr
-
- PLMXML - Static variable in class nxopen.JtCreator.FileStructure
-
JTs with PLMXML
- plmxmlFileName() - Method in interface nxopen.mechatronics.FunctionObjectBuilder
-
Returns the plmxml file name
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- plmxmlObjectNamePlugin() - Method in interface nxopen.routing.CustomManager.PlmxmlObjectNamePlugin
-
This defines the prototype for the Route Node and Route Section name plugins.
- plot(int, int, boolean) - Method in interface nxopen.cae.PostGraph
-
Plot the graph in as XY plot in given view port
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- plot(int, int) - Method in interface nxopen.cae.SimBcXyPlotBuilder
-
Creates XY plot
License requirements: nx_masterfem ("Finite Element Modeling")
.
- plot() - Method in interface nxopen.cae.ThicknessBuilder
-
The plotting method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- PLOT - Static variable in class nxopen.cae.xyplot.ModelType
-
- Plot - Interface in nxopen.cae.xyplot
-
Manages the plot template
Not support KF.
- plot(SessionVisualizationHighQualityImage.ResolutionType, int, SessionVisualizationHighQualityImage.PlotQualityType, String) - Method in interface nxopen.ModelingViewHighQualityImage
-
Plots the previously generated high qualilty image of a view.
- plot() - Method in interface nxopen.UFSession
-
- Plot.DeviceAndViewIndexData - Class in nxopen.cae.xyplot
-
- Plot.ViewBoundingBoxData - Class in nxopen.cae.xyplot
-
- Plot2D - Interface in nxopen.cae.xyplot
-
Manages the display of 2D plot.
- PLOT2D - Static variable in class nxopen.cae.xyplot.PlotType
-
2D plot
- PLOT2DIN_STACK - Static variable in class nxopen.cae.xyplot.PlotType
-
2D plot in stacked sequence
- Plot3D - Interface in nxopen.cae.xyplot
-
Manages the display of 3D plot.
- PLOT3D - Static variable in class nxopen.cae.xyplot.PlotType
-
3D plot
- PLOT_BAR_CHART - Static variable in class nxopen.cae.xyplot.PlotType
-
BarChart plot
- PLOT_COARSE - Static variable in class nxopen.uf.UFDisp.ShadePlot
-
- PLOT_COLOR_BAR - Static variable in class nxopen.cae.xyplot.PlotType
-
ColorBar plot
- PLOT_COLOR_MAP - Static variable in class nxopen.cae.xyplot.PlotType
-
ColorMap plot
- PLOT_FINE - Static variable in class nxopen.uf.UFDisp.ShadePlot
-
- PLOT_MEDIUM - Static variable in class nxopen.uf.UFDisp.ShadePlot
-
- PLOT_REASON - Static variable in class nxopen.uf.UFCgm.ExportReason
-
- PLOT_ROUGH - Static variable in class nxopen.uf.UFDisp.ShadePlot
-
- PlotBuilder - Interface in nxopen
-
- PlotBuilder.ImageResolutionOption - Class in nxopen
-
Specifies the plot image resolution
- PlotBuilder.JustificationOption - Class in nxopen
-
Specifies the justification of the banner
- PlotBuilder.PlotTypes - Class in nxopen
-
Specifies the type of plot
- PlotBuilder.RotationOption - Class in nxopen
-
Specifies the rotation of the banner
- PlotBuilder.UnitsOption - Class in nxopen
-
Specifies which units are associated to the dimensions
- PlotBuilder.XdisplayOption - Class in nxopen
-
Specifies the x-coordinate for the banner location
- PlotBuilder.YdisplayOption - Class in nxopen
-
Specifies the y-coordinate for the banner location
- PlotColorsWidthsBuilder - Interface in nxopen
-
- PlotColorsWidthsBuilder.Color - Class in nxopen
-
Specifies the color option to use when plotting.
- PlotColorsWidthsBuilder.Width - Class in nxopen
-
Specifies the primary selection of which type of width assignment to use.
- plotContour(int) - Method in interface nxopen.cae.NxBcPlotContours
-
Plot
SimBC
contour
License requirements: nx_masterfem ("Finite Element Modeling")
Created in NX8.5.0
- plotContour(int) - Method in interface nxopen.cae.ThicknessPlotContours
-
Plot
Mesh2d
contour
License requirements: nx_masterfem ("Finite Element Modeling")
Created in NX8.5.0
- plotEnable() - Method in interface nxopen.motion.GraphBuilder
-
- plotGraph(int, Post.GraphIds, boolean) - Method in interface nxopen.cae.Post
-
Plot or Overlay the input graph specfied by graph_ids.
- plotgraphs(int, int, PostGraph[], boolean) - Method in interface nxopen.cae.Post
-
Plot or overlay
PostGraph
objects as XY plot
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
Created in NX9.0.0
- PlotGraphTemplate - Interface in nxopen.cae.xyplot
-
Manages the plot graph template.
- plotManager() - Method in interface nxopen.BasePart
-
Returns the PlotManager instance belonging to this part .
- PlotManager - Interface in nxopen
-
The PlotManager class provides methods to create Gateway Builder objects.
- PlotParameters - Interface in nxopen.cae.xyplot
-
Represents the parameters passed to create a plot.
- plotQuality() - Method in interface nxopen.preferences.SessionVisualizationHighQualityImage
-
Returns the quality of the plot of the High Quality Image.
- plotQuality - Variable in class nxopen.uf.UFDisp.ShadeOptions
-
- plotRecords(PlotParameters) - Method in interface nxopen.cae.xyplot.XYPlotManager
-
Creates plot with given parameters
License requirements: None.
- PlotSourceBuilder - Interface in nxopen
-
- plotStyle() - Method in interface nxopen.motion.GraphBuilder
-
- plotTemplate() - Method in interface nxopen.cae.xyplot.Plot
-
Returns the plot template
License requirements: None.
- plotTemplate() - Method in interface nxopen.cae.xyplot.PlotParameters
-
Returns the plot template to be used by the plot
License requirements: None.
- plotterText() - Method in interface nxopen.PlotBuilder
-
Returns the plotter text.
- plotTolerance - Variable in class nxopen.uf.UFPlot.UghpglCmpOptions
-
- plotType() - Method in interface nxopen.cae.xyplot.PlotParameters
-
Returns the plot type
License requirements: None.
- PlotType - Class in nxopen.cae.xyplot
-
Represents the plot type
- plotType() - Method in interface nxopen.PlotBuilder
-
Returns the type of plot.
- plotVariableName() - Method in interface nxopen.features.BodyByEquationBuilder
-
Returns the Symbolica or Maple plot3D variable index to export that defines the surface to be used in this feature.
- PLUG_LIST - Static variable in class nxopen.ame.DocumentType
-
- PLUG_LIST - Static variable in class nxopen.ame.PageBuilder.Types
-
- PLUG_NA_TYPE - Static variable in class nxopen.uf.UFWeld.Types
-
- PLUG_SLOT - Static variable in class nxopen.annotations.LineWeldDataBuilder.WeldSymbolType
-
- PLUG_SLOT - Static variable in class nxopen.annotations.Symbol
-
Specifies plug/slot weld symbol
- PLUG_SLOT - Static variable in class nxopen.weld.UserDefinedWeldBuilder.WeldTypes
-
Plug Slot Weld type.
- PLUG_SLOT - Static variable in class nxopen.weld.WeldObjectBuilder.CommandName
-
Plug Slot command
- PLUG_SLOT_FEATURE - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
-
- PLUG_TYPE - Static variable in class nxopen.uf.UFWeld.Types
-
- PLUG_WELD - Static variable in class nxopen.uf.UFConstants
-
- PLUG_WELD_NON_ASSOCIATIVE - Static variable in class nxopen.uf.UFConstants
-
- PlugSlot - Interface in nxopen.weld
-
create a PlugSlot feature for Weld
To create or edit an instance of this class, use
PlugSlotBuilder
Created in NX8.0.0
- PLUGSLOT_WELD - Static variable in class nxopen.uf.UFConstants
-
- PlugSlotBuilder - Interface in nxopen.weld
-
- PlugSlotBuilder.ArcProcessEnum - Class in nxopen.weld
-
arc process for the weld feature
- PlugSlotBuilder.EnumContour - Class in nxopen.weld
-
contour type
- PLUNGE - Static variable in class nxopen.cam.NcmPlanarBuilder.FinalRet
-
plunge
- PLUNGE - Static variable in class nxopen.cam.NcmPlanarEngRetBuilder.IfEngageDoesNotFitTypes
-
Plunge
- PLUNGE_ALT - Static variable in class nxopen.cam.CutStrategy.Types
-
Cut strategy: Plunge Alternate
- PLUNGE_CASTLEING - Static variable in class nxopen.cam.CutStrategy.Types
-
Cut strategy: Plunge Castleing
- PLUNGE_LIFT - Static variable in class nxopen.cam.NcmEngRetBuilder.EngageRetractTypes
-
Plunge Engage/Lift Retract
- PLUNGE_LIFT - Static variable in class nxopen.cam.NcmPlanarEngRetBuilder.EngRetTypes
-
Plunge Engage/Lift Retract
- PLUNGE_LIFT - Static variable in class nxopen.cam.NcmScEngRetBuilder.EngRetTypes
-
Plunge Engage/Lift Retract
- PLUNGE_Z - Static variable in class nxopen.cam.CutStrategy.Types
-
Cut strategy: Plunge Zig
- PLUNGE_ZZ - Static variable in class nxopen.cam.CutStrategy.Types
-
Cut strategy: Plunge Zig-Zag
- plungeDirection() - Method in interface nxopen.cam.MillCutParameters
-
Returns the plunge direction
License requirements: None.
- PlungeMilling - Interface in nxopen.cam
-
Represents a Plunge Milling Operation
To create or edit an instance of this class, use
PlungeMillingBuilder
Created in NX7.5.0
- PlungeMillingBuilder - Interface in nxopen.cam
-
- PlungeMillingBuilder.TransferMethodTypes - Class in nxopen.cam
-
Available types for transfer method type in planar mill operation
- PLUS - Static variable in class nxopen.annotations.DatumTargetBuilder.TerminatorTypes
-
terminated with plus
- PLUS - Static variable in class nxopen.cae.MarkerType0d
-
- PLUS - Static variable in class nxopen.cae.ModelDisplayBuilder.FreeEdgeMarker
-
Plus marker
- PLUS - Static variable in class nxopen.cae.ModelDisplayBuilder.StitchedEdgeMarker
-
Plus marker
- PLUS - Static variable in class nxopen.cae.xyplot.PointMarker
-
Plus marker
- PLUS - Static variable in class nxopen.die.AddendumSectionBuilder.SegmentType
-
Update plus segment.
- PLUS - Static variable in class nxopen.features.shipdesign.DeckListItemBuilder.DatumDir
-
- PLUS - Static variable in class nxopen.preferences.SubdivisionModelingPreferences.CagePolylineVertexStyles
-
- PLUS - Static variable in class nxopen.preferences.SubdivisionModelingPreferences.VertexStyleTypes
-
- PLUS_FEMALE - Static variable in class nxopen.die.DrawBeadBuilder.OutputTypes
-
Creates the male and female bead.
- PLUS_IN_CIRCLE - Static variable in class nxopen.uf.UFDisp.PolyMarker
-
- PLUS_IN_CIRCLE - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- PLUS_LIMIT1LINE - Static variable in class nxopen.annotations.SearchCriteriaSurfaceFinishBuilder.ToleranceTypeOptions
-
+ limit 1 line
- PLUS_LIMIT2LINES - Static variable in class nxopen.annotations.SearchCriteriaSurfaceFinishBuilder.ToleranceTypeOptions
-
+ limit 2 lines
- PLUS_LIMIT_ONE_LINE - Static variable in class nxopen.annotations.BaseSurfaceFinishBuilder.ToleranceOption
-
Plus limit one line
- PLUS_LIMIT_ONE_LINE - Static variable in class nxopen.annotations.SearchCriteriaDimensionBuilder.ToleranceTypes
-
PlusLimitOneLine
- PLUS_LIMIT_TWO_LINES - Static variable in class nxopen.annotations.BaseSurfaceFinishBuilder.ToleranceOption
-
Plus limit two lines
- PLUS_LIMIT_TWO_LINES - Static variable in class nxopen.annotations.SearchCriteriaDimensionBuilder.ToleranceTypes
-
PlusLimitTwoLines
- PLUS_MINUS - Static variable in class nxopen.uf.UFGdt.TolFormat
-
- PLUS_OVER_MINUS - Static variable in class nxopen.uf.UFGdt.TolFormat
-
- PLUS_SHEET_METAL - Static variable in class nxopen.die.DrawBeadBuilder.OutputTypes
-
Creates the male, female and sheet metal bead.
- PLUS_SIGN - Static variable in class nxopen.fields.DisplayPropertiesBuilder.IndepDomDispType
-
- PLUS_SIGN - Static variable in class nxopen.fields.DisplayPropertiesBuilder.ValuesEnum
-
- PLUS_SIGN - Static variable in class nxopen.preferences.SessionModeling.EndpointDisplayStyleType
-
- PLUS_SIGN - Static variable in class nxopen.preferences.SessionModeling.PoleDisplayStyleType
-
- PLUS_SIGN - Static variable in class nxopen.preferences.SessionModeling.PoleEditStyleType
-
- plusLength() - Method in interface nxopen.die.AddendumSectionBuilder
-
Returns the minimum plus length.
- PLY - Static variable in class nxopen.cae.LaminateGraphicalReportBuilder.CoordinateSystemType
-
Ply coordinate system
- PLY - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.CoordinateSystemType
-
Ply coordinate system
- ply() - Method in interface nxopen.cae.PostJtExportBuilder
-
Returns the ply and layer of the builder
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- ply - Variable in class nxopen.cae.ResultParameters.AskSectionPlyLayerData
-
- PLY_BIOT_STRAIN - Static variable in class nxopen.cae.Result.Quantity
-
- PLY_DAMAGE - Static variable in class nxopen.cae.Result.Quantity
-
- PLY_ELASTIC_STRAIN - Static variable in class nxopen.cae.Result.Quantity
-
- PLY_FAILURE_INDEX - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.FilteringType
-
Filter values based on the ply failure index
- PLY_FAILURE_INDEX - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.SortingType
-
Sort results based on the ply failure index
- PLY_FAILURE_INDEX - Static variable in class nxopen.cae.Result.Quantity
-
- PLY_GREEN_STRAIN - Static variable in class nxopen.cae.Result.Quantity
-
- PLY_ID - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.SortingType
-
Sort results using the ply id
- PLY_MARGINOF_SAFETY - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.FilteringType
-
Filter values based on the ply margin of safety
- PLY_MARGINOF_SAFETY - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.SortingType
-
Sort results based on the ply margin of safety
- PLY_NATURAL_STRAIN - Static variable in class nxopen.cae.Result.Quantity
-
- PLY_PLASTIC_DAMAGE - Static variable in class nxopen.cae.Result.Quantity
-
- PLY_PLASTIC_STRAIN - Static variable in class nxopen.cae.Result.Quantity
-
- PLY_SAFETY_MARGIN - Static variable in class nxopen.cae.Result.Quantity
-
- PLY_STRAIN - Static variable in class nxopen.cae.Result.Quantity
-
- PLY_STRAIN_CREEP - Static variable in class nxopen.cae.Result.Quantity
-
- PLY_STRAIN_PLASTIC_EQ - Static variable in class nxopen.cae.Result.Quantity
-
- PLY_STRENGTH_RATIO - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.FilteringType
-
Filter values based on the ply strength ratio
- PLY_STRENGTH_RATIO - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.SortingType
-
Sort results based on the ply strength ratio
- PLY_STRENGTH_RATIO - Static variable in class nxopen.cae.Result.Quantity
-
- PLY_STRESS - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.SolverInputType
-
Use the solver ply stresses
- PLY_STRESS - Static variable in class nxopen.cae.Result.Quantity
-
- PLY_STRESS_EQUIVALENT - Static variable in class nxopen.cae.Result.Quantity
-
- PLY_STRESS_NONLINEAR - Static variable in class nxopen.cae.Result.Quantity
-
- PLY_THERMAL_STRAIN - Static variable in class nxopen.cae.Result.Quantity
-
- plyBottom() - Method in interface nxopen.cae.LaminateGraphicalReportBuilder
-
Returns the state of the ply stress calculation at the bottom of each ply
License requirements: None.
- plyBottom() - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
Returns the state of the ply stress calculation at the bottom of each ply
License requirements: None.
- plyExportOption() - Method in interface nxopen.cae.LaminateGraphicalReportBuilder
-
Returns the ply global id option
License requirements: None.
- plyFailureTheory() - Method in interface nxopen.cae.LaminatePly
-
Returns the ply failure theory used in a solid laminate nastran analysis (PCOMPS)
License requirements: None.
- plyFilter() - Method in interface nxopen.cae.LaminateGraphicalReportBuilder
-
Returns the ply filter
License requirements: None.
- plyFilter() - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
Returns the ply filter
License requirements: None.
- plyGroups() - Method in interface nxopen.cae.Laminate
-
Returns the PlyGroup collection defining the layup of this laminate .
- plyGroups() - Method in interface nxopen.cae.LaminateGlobalLayup
-
The list of ply groups associated to global layup .
- plyid() - Method in interface nxopen.cae.ResultVariable
-
Returns the ply ID
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- plyMiddle() - Method in interface nxopen.cae.LaminateGraphicalReportBuilder
-
Returns the state of the ply stress calculation at the middle of each ply
License requirements: None.
- plyMiddle() - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
Returns the state of the ply stress calculation at the middle of each ply
License requirements: None.
- plynumber - Variable in class nxopen.cae.Result.ResultParameters
-
Deprecated.
- plyOffset - Variable in class nxopen.cae.FEModelOccurrence.OccEntityLabelOffsetsData
-
ply offset
- plySelect() - Method in interface nxopen.cae.FlatPatternsBuilder
-
Returns the ply select
License requirements: None.
- plyStrain() - Method in interface nxopen.cae.LaminateGraphicalReportBuilder
-
Returns the ply strain results
License requirements: None.
- plyStrain() - Method in interface nxopen.cae.LaminateQuickReportBuilder
-
Returns the ply strains
License requirements: None.
- plyStrainOutput() - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
Returns the ply strains output control
License requirements: None.
- plyStrainRule() - Method in interface nxopen.cae.LaminateGraphicalReportBuilder
-
Returns the ply strain rule
License requirements: None.
- plyStrainRule() - Method in interface nxopen.cae.LaminateQuickReportBuilder
-
Returns the ply strains rule
License requirements: None.
- plyStrainRule() - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
Returns the ply strains summary table enveloping rule
License requirements: None.
- plyStress() - Method in interface nxopen.cae.LaminateGraphicalReportBuilder
-
Returns the ply stress result
License requirements: None.
- plyStress() - Method in interface nxopen.cae.LaminateQuickReportBuilder
-
Returns the ply stresses
License requirements: None.
- plyStressCoordSys() - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
Returns the ply stresses and strains coordinate system
License requirements: None.
- plyStressMaxP() - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
Returns the ply maximum principal stress and/or strain
License requirements: None.
- plyStressMaxS() - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
Returns the ply maximum shear stress and/or strain
License requirements: None.
- plyStressMinP() - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
Returns the ply minimum principal stress and/or strain
License requirements: None.
- plyStressOutput() - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
Returns the ply stresses output control
License requirements: None.
- plyStressRule() - Method in interface nxopen.cae.LaminateGraphicalReportBuilder
-
Returns the ply stress rule
License requirements: None.
- plyStressRule() - Method in interface nxopen.cae.LaminateQuickReportBuilder
-
Returns the ply stresses rule
License requirements: None.
- plyStressRule() - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
Returns the ply stresses summary table enveloping rule
License requirements: None.
- plyStressXX() - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
Returns the ply stress and/or strain XX component
License requirements: None.
- plyStressXY() - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
Returns the ply stress and/or strain XY component
License requirements: None.
- plyStressYY() - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
Returns the ply stress and/or strain YY component
License requirements: None.
- plyStressYZ() - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
Returns the ply stress and/or strain YZ component
License requirements: None.
- plyStressZX() - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
Returns the ply stress and/or strain ZX component
License requirements: None.
- plyStressZZ() - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
Returns the ply stress and/or strain ZZ component
License requirements: None.
- plyTop() - Method in interface nxopen.cae.LaminateGraphicalReportBuilder
-
Returns the state of the ply stress calculation at the top of each ply
License requirements: None.
- plyTop() - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
Returns the state of the ply stress calculation at the top of each ply
License requirements: None.
- pmarkFrequency() - Method in interface nxopen.preferences.SessionModeling
-
- PMASS - Static variable in class nxopen.cae.ModelUpdateDesignVariablesRapidCreateBuilder.PhysicalTypesEnum
-
- PMDCMotor - Interface in nxopen.motion
-
Represents a motion pmdc motor object
To create or edit an instance of this class, use
PMDCMotorBuilder
Created in NX6.0.0
- PMDCMotorBuilder - Interface in nxopen.motion
-
- PMDCMotorBuilder.Type - Class in nxopen.motion
-
Motor type
- PMDCMotorCollection - Interface in nxopen.motion
-
Represents a collection of motion pmdc motor
To obtain an instance of this class, refer to
MotionManager
Created in NX6.0.0
- pmdcmotors() - Method in interface nxopen.motion.MotionManager
-
- Pmi - Interface in nxopen.annotations
-
Represents a PMI(Product and Manufacturing Information) object.
- PMI - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.ToleranceSource
-
PMI
- PMI - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all pmi types.
- pmi() - Method in interface nxopen.drawings.ViewStyleInheritPmiBuilder
-
Returns the pmi option on the INHERIT PMI tab of the View Style Dialog
License requirements: None.
- PMI - Static variable in class nxopen.features.PartGeometryCopyBuilder.Type
-
PMI dimension
- pmi() - Method in interface nxopen.features.PartGeometryCopySelectBuilder
-
Returns the pmi
License requirements: None.
- pmi() - Method in interface nxopen.preferences.SessionPreferences
-
Returns object for doing Pmi preferences settings applicable to entire session .
- pmi() - Method in interface nxopen.weld.FilletBuilder
-
Returns the pmi symbol.
- PMI_ANNOTATIONS - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all pmi annotations.
- PMI_BALLOONS - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all pmi balloons.
- PMI_CENTERLINES - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all pmi centerlines.
- PMI_CONDS - Static variable in class nxopen.cam.FeatureTeaching.RuleMatchOptionType
-
- PMI_CUSTOM_SYMBOLS - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all pmi custom symbols.
- PMI_DATUM_FEATURE_SYMBOLS - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all pmi datum feature symbols.
- PMI_DATUM_TARGETS - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all pmi datum targets.
- PMI_DIMENSIONS - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide pmi dimensions
- PMI_FEATURE_CONTROL_FRAMES - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all pmi feature control frames.
- PMI_GDT - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide pmi gdt
- PMI_GEOMETRY - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide pmi geometry
- PMI_NOTES - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide pmi notes
- PMI_OBJECT - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all pmi objects
- PMI_OBJECT_DIMENSIONS - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all pmi dimensions.
- PMI_OBJECT_NOTES - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all pmi notes.
- PMI_REGIONS - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all pmi regions.
- PMI_SKETCH_DIMENSIONS - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all pmi sketch dimensions
- PMI_SURFACE_FINISH_SYMBOLS - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all pmi surface finish symbols.
- PMI_SYMBOLS - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide pmi symbols
- PMI_TABLES - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all pmi tables.
- PMI_WELD_SYMBOLS - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all pmi weld symbols.
- PmiAngularDimension - Interface in nxopen.annotations
-
Represents a PMI angular dimension
Abstract class
.
- PmiAngularDimensionBuilder - Interface in nxopen.annotations
-
Represents a
AngularDimension
builder
This is an abstract class and cannot be instantiated.
- PmiArcLengthDimension - Interface in nxopen.annotations
-
- PmiAttribute - Interface in nxopen.annotations
-
Represents a Pmi Attribute
To create or edit an instance of this class, use
PmiAttributeBuilder
Created in NX6.0.0
- PmiAttributeBuilder - Interface in nxopen.annotations
-
- PmiAttributeCollection - Interface in nxopen.annotations
-
- pmiAttributes() - Method in interface nxopen.annotations.PmiManager
-
PmiAttribute collection .
- PmiAttributeValue - Interface in nxopen.annotations
-
Represents a PMI Attribute Value
This is an abstract class.
- PmiAttributeValueInteger - Interface in nxopen.annotations
-
- PmiAttributeValueIntegerBuilder - Interface in nxopen.annotations
-
- PmiAttributeValueList - Interface in nxopen.annotations
-
- PmiAttributeValueListBuilder - Interface in nxopen.annotations
-
- PmiAttributeValueMultipleString - Interface in nxopen.annotations
-
- PmiAttributeValueMultipleStringBuilder - Interface in nxopen.annotations
-
- PmiAttributeValueNumber - Interface in nxopen.annotations
-
- PmiAttributeValueNumberBuilder - Interface in nxopen.annotations
-
- PmiAttributeValueString - Interface in nxopen.annotations
-
- PmiAttributeValueStringBuilder - Interface in nxopen.annotations
-
- PmiAttributeValueUrl - Interface in nxopen.annotations
-
- PmiAttributeValueUrlBuilder - Interface in nxopen.annotations
-
- PmiBaselineDimension - Interface in nxopen.annotations
-
Represents a PMI baseline dimension.
- PmiBoltCircleCenterline - Interface in nxopen.annotations
-
- PmiBoltCircleCenterlineBuilder - Interface in nxopen.annotations
-
- PmiCenterline3d - Interface in nxopen.annotations
-
Represents a Pmi 3D centerline
To create or edit an instance of this class, use
PmiCenterline3dBuilder
Created in NX7.5.0
- PmiCenterline3dBuilder - Interface in nxopen.annotations
-
Builder for creating Pmi 3D Centerline.
- PmiCenterMark - Interface in nxopen.annotations
-
Represents a PMI Center Mark class
To create or edit an instance of this class, use
PmiCenterMarkBuilder
Created in NX7.5.0
- PmiCenterMarkBuilder - Interface in nxopen.annotations
-
Builder for creating PMI Center Mark.
- PmiChainDimension - Interface in nxopen.annotations
-
Represents a PMI chain dimension.
- PmiChamferDimension - Interface in nxopen.annotations
-
- PmiChamferDimensionBuilder - Interface in nxopen.annotations
-
- PmiCollection - Interface in nxopen.annotations
-
Represents a collection of
Pmi
objects.
- PmiConcentricCircleDimension - Interface in nxopen.annotations
-
Represents a PMI concentric circle dimension
To create or edit an instance of this class, use
PmiThicknessDimensionBuilder
Created in NX4.0.0
- PmiCurveLengthDimensionBuilder - Interface in nxopen.annotations
-
- PmiCustomSymbol - Interface in nxopen.annotations
-
Represents a PMI custom symbol
To create or edit an instance of this class, use
PmiCustomSymbolBuilder
Created in NX4.0.0
- PmiCustomSymbolBuilder - Interface in nxopen.annotations
-
- PmiCylindricalDimension - Interface in nxopen.annotations
-
Represents a PMI cylindrical dimension
To create or edit an instance of this class, use
PmiLinearDimensionBuilder
Created in NX4.0.0
- PmiData - Interface in nxopen.annotations
-
Represents PMI(Product and Manufacturing Information) data .
- pmiData() - Method in interface nxopen.ObjectTypeSelector
-
Returns the pmi data - This should be set to true if pmi data are desired in the output file
License requirements: None.
- PmiDatumFeatureSymbolBuilder - Interface in nxopen.annotations
-
- PmiDatumTargetBuilder - Interface in nxopen.annotations
-
- PmiDefaultPlane - Class in nxopen.annotations
-
Specifies the options for the default PMI annotation plane
- PmiDiameterDimension - Interface in nxopen.annotations
-
Represents a PMI diameter dimension
To create or edit an instance of this class, use
PmiRadialDimensionBuilder
Created in NX4.0.0
- pmiDimensionFromRevolved() - Method in interface nxopen.drawings.InheritPmiViewStyle
-
Returns the status of pmi inherited to drawing.
- pmiDimensionFromRevolved() - Method in interface nxopen.drawings.ViewCreationWizardBuilder
-
Returns the inherit pmi from revolved sketches
License requirements: None.
- PMIExplicitOrderBuilder - Interface in nxopen.annotations
-
- PmiFeatureControlFrameBuilder - Interface in nxopen.annotations
-
- PmiFilter - Interface in nxopen.annotations
-
Represents a base class for a PMI filter.
- PmiFilter.ComponentMethod - Class in nxopen.annotations
-
Specifies the type of component method used on the associated
components for display.
- PmiFilter.FilterType - Class in nxopen.annotations
-
Represents a type of PMI filter that can be created using the Part
Navigator.
- PmiFilterByPart - Interface in nxopen.annotations
-
Represents a PMI filter defined by a set of parts.
- PmiFilterByType - Interface in nxopen.annotations
-
Represents a PMI filter defined by a set of types.
- PmiFilterByType.Type - Class in nxopen.annotations
-
Represents a PMI type that is assigned to the PMI filter.
- PmiFilterByView - Interface in nxopen.annotations
-
Represents a PMI filter defined by a set of views.
- PmiFilterCollection - Interface in nxopen.annotations
-
Represents the collection of all PMI filters in the part.
- pmiFilters() - Method in interface nxopen.annotations.AnnotationManager
-
PmiFilter collection .
- PmiFoldedRadiusDimension - Interface in nxopen.annotations
-
Represents a PMI folded radius dimension
To create or edit an instance of this class, use
PmiRadialDimensionBuilder
Created in NX4.0.0
- pmiFromLabel() - Method in interface nxopen.ame.AMEEngineeringObjectLabel
-
Returns the PMI note object stored by AME Engineering object label
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- pmiFromRevolved() - Method in interface nxopen.drawings.ViewStyleInheritPmiBuilder
-
Returns the 'Show PMI Dimensions from Revolved Sketches' toggle on the INHERIT PMI tab of the View Style Dialog
License requirements: None.
- PmiHoleDimension - Interface in nxopen.annotations
-
Represents a PMI hole dimension
To create or edit an instance of this class, use
PmiRadialDimensionBuilder
Created in NX5.0.0
- PmiHorizontalDimension - Interface in nxopen.annotations
-
Represents a PMI horizontal dimension
To create or edit an instance of this class, use
PmiLinearDimensionBuilder
Created in NX4.0.0
- PmiHorizontalOrdinateDimension - Interface in nxopen.annotations
-
Represents a PMI horizontal ordinate dimension
To create or edit an instance of this class, use
PmiOrdinateDimensionBuilder
Created in NX4.0.0
- PmiInteger - Interface in nxopen.annotations
-
Represents a Pmi Integer
To create or edit an instance of this class, use
PmiIntegerBuilder
Created in NX6.0.0
- PmiIntegerBuilder - Interface in nxopen.annotations
-
- PmiLabel - Interface in nxopen.annotations
-
Represents a PMI label
.
- PmiLightweightSectionCollection - Interface in nxopen.annotations
-
- pmiLightweightSections() - Method in interface nxopen.annotations.PmiManager
-
Lightweight Section View collection .
- PmiLinearDimensionBuilder - Interface in nxopen.annotations
-
- PmiLineWeld - Interface in nxopen.annotations
-
Represents a PMI line weld
To create or edit an instance of this class, use
PmiLineWeldBuilder
Created in NX4.0.0
- PmiLineWeldBuilder - Interface in nxopen.annotations
-
- PmiMajorAngularDimension - Interface in nxopen.annotations
-
- PmiMajorAngularDimensionBuilder - Interface in nxopen.annotations
-
- PmiManager - Interface in nxopen.annotations
-
Represents an object that manages PMI objects.
- pmiManager() - Method in interface nxopen.Part
-
Returns the PmiManager for this part .
- PmiMinorAngularDimension - Interface in nxopen.annotations
-
- PmiMinorAngularDimensionBuilder - Interface in nxopen.annotations
-
- PmiNote - Interface in nxopen.annotations
-
Represents a PMI note
To create or edit an instance of this class, use
PmiNoteBuilder
Created in NX4.0.0
- PmiNoteBuilder - Interface in nxopen.annotations
-
- PmiNumber - Interface in nxopen.annotations
-
Represents a Pmi Number
To create or edit an instance of this class, use
PmiNumberBuilder
Created in NX6.0.0
- PmiNumberBuilder - Interface in nxopen.annotations
-
- PmiOption - Class in nxopen.preferences
-
Represents the Inherit PMI options
- PmiOrdinateDimensionBuilder - Interface in nxopen.annotations
-
- PmiOrdinateOriginDimension - Interface in nxopen.annotations
-
Represents a PMI ordinate origin dimension
There is no KF creator for this class.
- PmiParallelDimension - Interface in nxopen.annotations
-
Represents a PMI parallel dimension
To create or edit an instance of this class, use
PmiLinearDimensionBuilder
Created in NX4.0.0
- PmiPerpendicularDimension - Interface in nxopen.annotations
-
Represents a PMI perpendicular dimension
To create or edit an instance of this class, use
PmiLinearDimensionBuilder
Created in NX4.0.0
- pmiPoint() - Method in interface nxopen.geometricanalysis.SlopeAnalysisBuilder
-
Returns the point to draw labels.
- PmiPreferences - Interface in nxopen.annotations
-
Represents line and arrow preferences .
- PmiPreferences.PreferenceSymbolTypes - Class in nxopen.annotations
-
Specifies the allowable symbol types for Parallel To Screen and Lock Pan/Zoom
- PmiRadialDimensionBuilder - Interface in nxopen.annotations
-
- PmiRadiusDimension - Interface in nxopen.annotations
-
Represents a PMI radius dimension
To create or edit an instance of this class, use
PmiRadialDimensionBuilder
Created in NX4.0.0
- PmiRapidDimensionBuilder - Interface in nxopen.annotations
-
- PmiRegionCollection - Interface in nxopen.annotations
-
Represents a collection of
Region
objects
To obtain an instance of this class, refer to
PmiManager
Created in NX6.0.2
- pmiRegionHeight() - Method in interface nxopen.annotations.PmiPreferences
-
Returns the rectangular region height
License requirements: None.
- pmiRegionInnerDiameter() - Method in interface nxopen.annotations.PmiPreferences
-
Returns the circular/annular region inner diameter
License requirements: None.
- pmiRegionOuterDiameter() - Method in interface nxopen.annotations.PmiPreferences
-
Returns the circular/annular region outer diameter
License requirements: None.
- pmiRegions() - Method in interface nxopen.annotations.PmiManager
-
Region collection .
- pmiRegionWidth() - Method in interface nxopen.annotations.PmiPreferences
-
Returns the rectangular region width
License requirements: None.
- PmiResizeMethod - Class in nxopen.annotations
-
Specifies the options for the resize method
- pmis() - Method in interface nxopen.annotations.PmiManager
-
Pmi collection .
- PmiString - Interface in nxopen.annotations
-
Represents a Pmi String
To create or edit an instance of this class, use
PmiStringBuilder
Created in NX6.0.0
- PmiStringBuilder - Interface in nxopen.annotations
-
- pmiSupportForGeometrySharing() - Method in interface nxopen.annotations.PmiPreferences
-
Returns the flag indicating whether PMI support for geometry sharing is available
License requirements: None.
- PmiTableBuilder - Interface in nxopen.annotations
-
- PmiTableSection - Interface in nxopen.annotations
-
Represents a PMI table section
To create or edit an instance of this class, use
PmiTableBuilder
Created in NX12.0.0
- PmiTableSectionCollection - Interface in nxopen.annotations
-
- pmiTableSections() - Method in interface nxopen.annotations.AnnotationManager
-
PMI Table collection .
- PmiThicknessDimensionBuilder - Interface in nxopen.annotations
-
- pmiToDrawing() - Method in interface nxopen.drawings.ViewStyleInheritPmiBuilder
-
Returns the 'pmi to drawing' toggle on the INHERIT PMI tab of the View Style Dialog
License requirements: None.
- PmiTrackingPropertiesBuilder - Interface in nxopen.annotations
-
- pmiType() - Method in interface nxopen.annotations.SearchModelViewBuilder
-
Returns the pmi type
License requirements: None.
- pmiTypeMask() - Method in interface nxopen.drawings.ViewStyleInheritPmiBuilder
-
Returns the type mask on the INHERIT PMI tab of the View Style Dialog
License requirements: None.
- pmiTypes() - Method in interface nxopen.drawings.ViewCreationWizardBuilder
-
Returns the pmi types
License requirements: None.
- PmiUrlNote - Interface in nxopen.annotations
-
Represents a Pmi url Note
To create or edit an instance of this class, use
PmiUrlNoteBuilder
Created in NX6.0.0
- PmiUrlNoteBuilder - Interface in nxopen.annotations
-
- PmiUserDefined - Interface in nxopen.annotations
-
Represents a User Defined Attribute
To create or edit an instance of this class, use
PmiUserDefinedBuilder
Created in NX6.0.0
- PmiUserDefinedBuilder - Interface in nxopen.annotations
-
- PmiVerticalDimension - Interface in nxopen.annotations
-
Represents a PMI vertical dimension
To create or edit an instance of this class, use
PmiLinearDimensionBuilder
Created in NX4.0.0
- PmiVerticalOrdinateDimension - Interface in nxopen.annotations
-
Represents a PMI vertical ordinate dimension
To create or edit an instance of this class, use
PmiOrdinateDimensionBuilder
Created in NX4.0.0
- pmiWave() - Method in interface nxopen.annotations.PmiManager
-
WAVE collection .
- PmiWave - Interface in nxopen.annotations
-
Represents a Wave
To create or edit an instance of this class, use
PmiWaveLinkBuilder
Created in NX8.0.0
- PmiWaveCollection - Interface in nxopen.annotations
-
Represents a collection of
PmiWave
objects
To obtain an instance of this class, refer to
PmiManager
Created in NX8.0.0
- PmiWaveLinkBuilder - Interface in nxopen.annotations
-
- pmnavFolderLocator() - Method in interface nxopen.mechatronics.PhysicsManager
-
- PMNavFolderLocator - Interface in nxopen.mechatronics
-
Represents the PMNav Folder Locator.
- PMNavFolderLocatorCollection - Interface in nxopen.mechatronics
-
- pmnavFolderObject() - Method in interface nxopen.mechatronics.PhysicsManager
-
- PMNavFolderObject - Interface in nxopen.mechatronics
-
Represents the PMNav Folder object.
- PMNavFolderObjectCollection - Interface in nxopen.mechatronics
-
- PmopToolAxisCiBuilder - Interface in nxopen.cam
-
Represents a PmopToolAxisCiBuilder
This is an abstract class, and cannot be instantiated.
- PmopToolAxisCiBuilder.ToolAxisTypes - Class in nxopen.cam
-
Available types for pmop tool axis type
- PneumaticCylinder - Interface in nxopen.mechatronics
-
Represents the Pneumatic Cylinder.
- PneumaticCylinderBuilder - Interface in nxopen.mechatronics
-
- PneumaticCylinderBuilder.OutputRodType - Class in nxopen.mechatronics
-
the Rod types.
- PneumaticCylinderCollection - Interface in nxopen.mechatronics
-
Represents a collection of Pneumatic Cylinder.
- pneumaticCylinders() - Method in interface nxopen.mechatronics.PhysicsManager
-
- PneumaticValve - Interface in nxopen.mechatronics
-
Represents the Pneumatic Valve.
- PneumaticValveBuilder - Interface in nxopen.mechatronics
-
- PneumaticValveBuilder.OutputValveType - Class in nxopen.mechatronics
-
the Valve types.
- PneumaticValveCollection - Interface in nxopen.mechatronics
-
Represents a collection of Pneumatic Valve.
- pneumaticValves() - Method in interface nxopen.mechatronics.PhysicsManager
-
- PNG - Static variable in class nxopen.annotations.DraftingImage.FileType
-
PNG file type
- PNG - Static variable in class nxopen.display.IRayPlusStudioEditorBuilder.IRayPlusStudioRemoteRenderFormatType
-
- PNG - Static variable in class nxopen.display.IRayPlusStudioEditorBuilder.IRayPlusStudioStaticImageFileFormatType
-
Portable Network Graphic (PNG) file format
- PNG - Static variable in class nxopen.display.RayTracedStudioEditorBuilder.RayTracedStudioStaticImageFileFormatType
-
Portable Network Graphic (PNG) file format
- PNG - Static variable in class nxopen.display.SaveImageFileBrowserBuilder.FileFormats
-
Portable Network Graphic (PNG) file format
- PNG - Static variable in class nxopen.gateway.ImageCaptureBuilder.ImageFormat
-
the png image format
- PNG - Static variable in class nxopen.uf.UFDisp.ImageFormat
-
- PNG_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- PNG_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- PNG_FORMAT - Static variable in class nxopen.uf.UFPlot.Format
-
- pNorm - Variable in class nxopen.uf.UFModlGeneral.AskCurvePropsData
-
- pnt3 - Variable in class nxopen.uf.UFEvalsf.Pos3
-
- pntOrigin() - Method in interface nxopen.formboard.FaceAnnotationBuilder
-
Returns the user selected point where geometry will be placed
License requirements: routing_harness ("Routing Harness")
.
- POCKET - Static variable in class nxopen.sim.KinematicComponentBuilder.SystemClass
-
Static Holder classification
- POCKET_BODY - Static variable in class nxopen.tooling.CornerDesignBuilder.SelectFromOpt
-
pocket body only
- POCKET_ON_HEAD - Static variable in class nxopen.sim.KinematicComponentBuilder.SystemClass
-
Dynamic Holder classification
- PocketBuilder - Interface in nxopen.tooling
-
- PocketBuilder.ModeType - Class in nxopen.tooling
-
Represents the pocket operation method
- PocketBuilder.RsetType - Class in nxopen.tooling
-
Represents the pocket refset types
- PocketBuilder.ToolType - Class in nxopen.tooling
-
Represents the select type of tool
- PocketCollection - Interface in nxopen.tooling
-
- pocketIdBuilder() - Method in interface nxopen.cam.MachinePocketGroupBuilder
-
Returns the pocket id
License requirements: None.
- pocketIdStringBuilder() - Method in interface nxopen.cam.MachinePocketGroupBuilder
-
Returns the pocket id in string
License requirements: None.
- pockets() - Method in interface nxopen.tooling.ToolingManager
-
Returns the PocketCollection instance belonging to this part .
- POD_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- POD_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- POIN_TO_POINT - Static variable in class nxopen.drawings.SketchSectionLineBuilder.SectionLineTypes
-
- POINT - Static variable in class nxopen.ame.AmeJunctionRepresentationStyleType
-
- POINT - Static variable in class nxopen.ame.MountingInterfaceBuilder.FixingPolicy
-
- point - Variable in class nxopen.ame.SelectAMEBaseNode.ValueData
-
selected object point
- point - Variable in class nxopen.ame.SelectAMEExtendedObject.ValueData
-
selected object point
- point - Variable in class nxopen.ame.SelectAMEPort.ValueData
-
selected object point
- point - Variable in class nxopen.ame.SelectAspectNode.ValueData
-
selected object point
- POINT - Static variable in class nxopen.annotations.DatumTargetBuilder.Types
-
point
- POINT - Static variable in class nxopen.annotations.SearchCriteriaDatumTargetBuilder.DatumTargetTypes
-
point type
- point - Variable in class nxopen.annotations.SelectAnnotation.ValueData
-
selected object point
- point - Variable in class nxopen.annotations.SelectDimension.ValueData
-
selected object point
- point - Variable in class nxopen.assemblies.SelectComponent.ValueData
-
selected object point
- point() - Method in interface nxopen.Axis
-
- POINT - Static variable in class nxopen.blockstyler.PropertyList.PropertyType
-
Point
- point() - Method in interface nxopen.blockstyler.SpecifyPoint
-
Returns the Point
License requirements: None.
- point() - Method in interface nxopen.blockstyler.SpecifyVector
-
Returns the Point
License requirements: None.
- POINT - Static variable in class nxopen.cae.BoltBuilder.Selection
-
Allows point selection for head/nut/junction
- POINT - Static variable in class nxopen.cae.connections.DofCombination
-
DOF1 fixed, DOF2 free, DOF3 free, DOF4 free, DOF5 free, DOF6 free
- POINT - Static variable in class nxopen.cae.connections.LocationDirectionType
-
Two Points/Nodes
- POINT - Static variable in class nxopen.cae.connections.LocationType
-
Point
- point() - Method in interface nxopen.cae.connections.LocationWithDir
-
Returns the point of the direction definition start point.
- point() - Method in interface nxopen.cae.connections.PointLocation
-
Returns the POINT used for creating the location.
- POINT - Static variable in class nxopen.cae.ElementCreateBuilder.ElemDimType
-
0D element
- point() - Method in interface nxopen.cae.ElementCreateBuilder
-
Returns the selected point
License requirements: None.
- POINT - Static variable in class nxopen.cae.ElementTypeBuilder.ElementType
-
0D element
- POINT - Static variable in class nxopen.cae.ElementTypes.Shape
-
Point
- POINT - Static variable in class nxopen.cae.FluidDomainBuilder.IntExtType
-
The interior specified by providing a point.
- POINT - Static variable in class nxopen.cae.MeshCollectorBuilder.ElementDimensionOption
-
0-d
- point() - Method in interface nxopen.cae.MeshPointInsideVolumeBuilder
-
Returns the point
License requirements: None.
- point() - Method in interface nxopen.cae.MeshPointProjectBuilder
-
Returns the point
License requirements: None.
- point() - Method in interface nxopen.cae.NodeCreateBuilder
-
Returns the point
License requirements: None.
- POINT - Static variable in class nxopen.cae.optimization.Geometry
-
Point
- POINT - Static variable in class nxopen.cae.optimization.TBSCastCondition.MiddlePlaneType
-
A point within the central plane from which the deformation vector is positioned perpendicular to
- point() - Method in interface nxopen.cae.PointSelectionRecipe
-
Returns the point.
- POINT - Static variable in class nxopen.cae.PostGraphBuilder.EntityType
-
- point() - Method in interface nxopen.cae.PostSelectionEntity
-
Returns the point selected
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- POINT - Static variable in class nxopen.cae.PropertyTable.PropertyType
-
- point - Variable in class nxopen.cae.QueryCurvePost.Entity
-
- POINT - Static variable in class nxopen.cae.QueryCurvePost.EntityType
-
- POINT - Static variable in class nxopen.cae.ReassignElementsBuilder.ElementDimensionOption
-
0-d
- point - Variable in class nxopen.cae.SelectCAEBody.ValueData
-
selected object point
- point - Variable in class nxopen.cae.SelectCAEEdge.ValueData
-
selected object point
- point - Variable in class nxopen.cae.SelectCAEFace.ValueData
-
selected object point
- point - Variable in class nxopen.cae.SelectFENode.ValueData
-
selected object point
- POINT - Static variable in class nxopen.cae.SuppressHoleBuilder.OptionPointCreate
-
- POINT - Static variable in class nxopen.cae.WeldBuilder.WeldLocation
-
Creates a weld at locations specified using points
- point() - Method in interface nxopen.cam.BoundaryTurnBlank
-
Returns the head stock position
License requirements: None.
- POINT - Static variable in class nxopen.cam.CamInspectionOperationFeaturetypes
-
Point
- POINT - Static variable in class nxopen.cam.CamOperationMotionShapeType
-
- POINT - Static variable in class nxopen.cam.CircularAboutAxisMoveBuilder.EndType
-
Point
- POINT - Static variable in class nxopen.cam.CleanupOutput.GeomTypes
-
Points
- point() - Method in interface nxopen.cam.FirstPlunge
-
Returns the first plunge point
License requirements: None.
- point() - Method in interface nxopen.cam.InitialProfilePlunge
-
Returns the initial profile plunge point
License requirements: None.
- point() - Method in interface nxopen.cam.InPathEventDataBuilder
-
Returns the Inpath Events Location
License requirements: cam_base ("CAM BASE")
.
- POINT - Static variable in class nxopen.cam.InspectionAlignmentAssistantBuilder.FeatureType
-
Point alignment feature type
- POINT - Static variable in class nxopen.cam.InspectionConstructedFeatureBuilder.ConstFeatType
-
Constructed Point Feature
- POINT - Static variable in class nxopen.cam.InspectionMethodBuilder.MethodTypes
-
Point
- point - Variable in class nxopen.cam.InspectionPathPointBuilder.PointData
-
the selected point
- POINT - Static variable in class nxopen.cam.IpwContainmentCurvesBuilder.ThicknessModeValue
-
use thickness mode point
- point() - Method in interface nxopen.cam.LaserControlPoint
-
Returns the Control Point
License requirements: None.
- POINT - Static variable in class nxopen.cam.LaserLinearMove.MotionEnds
-
Point
- point() - Method in interface nxopen.cam.LaserLinearMove
-
Returns the Point
License requirements: None.
- point() - Method in interface nxopen.cam.LaserPiercingPoint
-
Returns the Piercing Point
License requirements: None.
- point() - Method in interface nxopen.cam.MoveToPointBuilder
-
Returns the location
License requirements: None.
- point() - Method in interface nxopen.cam.NcmAvoidancePointBuilder
-
Returns the avoidance point
License requirements: None.
- POINT - Static variable in class nxopen.cam.NcmClearanceBuilder.ClearanceTypes
-
clearance point
- point() - Method in interface nxopen.cam.NcmClearanceBuilder
-
Returns the point for clearance types point, cylinder and sphere
License requirements: None.
- point() - Method in interface nxopen.cam.NormalToToolAxisMoveBuilder
-
Returns the point in normal direction
License requirements: None.
- POINT - Static variable in class nxopen.cam.OperationBuilder.HoleDepthTypes
-
Smart Point
- point() - Method in interface nxopen.cam.PathContactMotion
-
Returns the point of the contact motion
License requirements: None.
- point() - Method in interface nxopen.cam.ProbeCalibrateLengthMoveBuilder
-
Returns the point to probe
License requirements: None.
- POINT - Static variable in class nxopen.cam.ProbeCalibrateSphereMoveBuilder.Geometry
-
Point
- point() - Method in interface nxopen.cam.ProbeCalibrateSphereMoveBuilder
-
Returns the point defining the sphere to probe
License requirements: None.
- POINT - Static variable in class nxopen.cam.ProbeCalibrateStylusMoveBuilder.Geometry
-
Point
- point() - Method in interface nxopen.cam.ProbeCalibrateStylusMoveBuilder
-
Returns the point defining the cylinder to probe
License requirements: None.
- POINT - Static variable in class nxopen.cam.ProbeInspectBorebossMoveBuilder.Geometry
-
Point
- point() - Method in interface nxopen.cam.ProbeInspectBorebossMoveBuilder
-
Returns the point defining the cylinder to inspect
License requirements: None.
- point() - Method in interface nxopen.cam.ProbeInspectPointMoveBuilder
-
Returns the point to probe
License requirements: None.
- point() - Method in interface nxopen.cam.ProbeInspectSurfacePointMoveBuilder
-
Returns the point to probe
License requirements: None.
- point() - Method in interface nxopen.cam.ProjVecCiBuilder
-
Returns the Point
License requirements: None.
- point() - Method in interface nxopen.cam.RotaryPointMoveBuilder
-
Returns the location
License requirements: None.
- point() - Method in interface nxopen.cam.RotaryPolarMoveBuilder
-
Returns the location
License requirements: None.
- point - Variable in class nxopen.cam.SelectCAMFeature.ValueData
-
selected object point
- POINT - Static variable in class nxopen.cam.SplitSubopCommand.Types
-
Divide by Point
- point() - Method in interface nxopen.cam.StopPosition
-
Returns the stop at point
License requirements: None.
- POINT - Static variable in class nxopen.cam.StopPosition.Types
-
Stop At mode: Point
- POINT - Static variable in class nxopen.cam.TeachmodeLinearMoveBuilder.EndPositionTypes
-
Point
- point() - Method in interface nxopen.cam.TeachmodeLinearMoveBuilder
-
Returns the Point
License requirements: None.
- POINT - Static variable in class nxopen.cam.TeachmodeProfileMoveBuilder.StartStopPositionMethods
-
Use selected point
- point() - Method in interface nxopen.cam.ToolAxisBase
-
Returns the Point
License requirements: None.
- point() - Method in interface nxopen.cam.ToolAxisTilt
-
Returns the tool axis point
License requirements: None.
- point() - Method in interface nxopen.cam.ToolChangePositionBuilder
-
Returns the location
License requirements: None.
- POINT - Static variable in class nxopen.cam.TrimPlane.LimitOptions
-
Plane is defined by a point.
- point() - Method in interface nxopen.cam.TrimPlane
-
Returns the trim plane point
License requirements: None.
- POINT - Static variable in class nxopen.cam.TrimPoint.Options
-
Point is active.
- point() - Method in interface nxopen.cam.TrimPoint
-
Returns the trim point
License requirements: None.
- POINT - Static variable in class nxopen.cam.TurnAvoidanceClearanceBuilder.AxialPlaneModes
-
Plane is defined by point.
- POINT - Static variable in class nxopen.cam.TurnAvoidanceClearanceBuilder.RadialPlaneModes
-
Plane is defined by point.
- POINT - Static variable in class nxopen.cam.TurnAvoidanceFromBuilder.FromPointModes
-
Point is defined by a point.
- POINT - Static variable in class nxopen.cam.TurnAvoidanceGohomeBuilder.GohomePointModes
-
Point is defined by point.
- POINT - Static variable in class nxopen.cam.TurnAvoidanceReturnBuilder.ReturnPointModes
-
Point is defined by point.
- POINT - Static variable in class nxopen.cam.TurnAvoidanceStartBuilder.StartPointModes
-
Point is defined by point.
- point() - Method in interface nxopen.cam.TurnEngageRetractBuilder
-
Returns the point
License requirements: None.
- point() - Method in interface nxopen.cam.TurnMoveToPointBuilder
-
Returns the location
License requirements: None.
- POINT - Static variable in class nxopen.cam.TurnProbeClearanceBuilder.AxialPlaneModes
-
Plane is defined by point.
- POINT - Static variable in class nxopen.cam.TurnProbeClearanceBuilder.RadialPlaneModes
-
Plane is defined by point.
- point() - Method in interface nxopen.cam.TurnProbeInspectPointMoveBuilder
-
Returns the point to probe
License requirements: None.
- point() - Method in interface nxopen.cam.TurnRoughFinishLocalReturnBuilder
-
Returns the local return point
License requirements: None.
- POINT - Static variable in class nxopen.cam.TurnRoughFinishTestCut.MeasuringPositionTypes
-
Test Cut Measuring Position: Point
- POINT - Static variable in class nxopen.cam.TurnRoughFinishTestCut.StopPositionTypes
-
Test Cut Stop Position: Point
- POINT - Static variable in class nxopen.cam.UdeParameter.ParameterTypes
-
- point() - Method in interface nxopen.cam.UdeParameter
-
Returns the point of the parameter
License requirements: cam_base ("CAM BASE")
.
- POINT - Static variable in class nxopen.cam.VectorDistanceMoveBuilder.EndType
-
end at point
- point() - Method in interface nxopen.cam.WedmPointDefinitionBuilder
-
Returns the wedm point
License requirements: cam_base ("CAM BASE")
.
- point() - Method in interface nxopen.die.DieLocationBuilder
-
Returns the specified point
License requirements: None.
- POINT - Static variable in class nxopen.die.DrawBeadTaperBuilder.TaperTypes
-
Use the spherical method, but the radius is defined by a point location and distance to the end of the centerline.
- point() - Method in interface nxopen.die.PointChildBuilder
-
Returns the location of the point.
- point() - Method in interface nxopen.die.PressureSystemChildBuilder
-
Returns the location of the pressure system.
- point() - Method in interface nxopen.die.WearPlateLocChildBuilder
-
Returns the point location along the centerline of die wear plate and locators
License requirements: ug_die_design ("Die Design")
.
- point() - Method in interface nxopen.drawings.SectionLineSegmentBuilder
-
Returns the point
License requirements: None.
- point() - Method in interface nxopen.drawings.SectionLineSegmentPointBuilder
-
Returns the section line segment
Point
License requirements: drafting ("DRAFTING")
Created in NX10.0.0
- point - Variable in class nxopen.drawings.SelectDraftingView.ValueData
-
selected object point
- point - Variable in class nxopen.drawings.SelectDrawingRegion.ValueData
-
selected object point
- point - Variable in class nxopen.drawings.SelectDrawingView.ValueData
-
selected object point
- point - Variable in class nxopen.drawings.SelectSectionLine.ValueData
-
selected object point
- point - Variable in class nxopen.facet.SelectFacetedBody.ValueData
-
selected object point
- POINT - Static variable in class nxopen.features.AssociativeArcBuilder.EndOption
-
Point
- POINT - Static variable in class nxopen.features.AssociativeArcBuilder.MidOption
-
Point
- POINT - Static variable in class nxopen.features.AssociativeArcBuilder.StartOption
-
Point
- POINT - Static variable in class nxopen.features.AssociativeLineBuilder.EndOption
-
Point
- POINT - Static variable in class nxopen.features.AssociativeLineBuilder.StartOption
-
Point
- point() - Method in interface nxopen.features.DatumAxisBuilder
-
Returns the point.
- point() - Method in interface nxopen.features.GeodesicPointBuilder
-
Returns the geodesic point
License requirements: None.
- POINT - Static variable in class nxopen.features.GeodesicProjectBuilder.Type
-
Point.
- point() - Method in interface nxopen.features.GeodesicTrimBuilder
-
Returns the selection point
License requirements: None.
- point() - Method in interface nxopen.features.GeometricConstraintData
-
Returns the point.
- point() - Method in interface nxopen.features.GlobalShapingPointOffsetBuilder
-
Returns the target point
License requirements: None.
- POINT - Static variable in class nxopen.features.MatchedReferenceBuilder.Types
-
point
- POINT - Static variable in class nxopen.features.OffsetEmbossBuilder.Types
-
This stands for point case.
- POINT - Static variable in class nxopen.features.PartGeometryCopyBuilder.Type
-
Point
- point() - Method in interface nxopen.features.PartGeometryCopySelectBuilder
-
Returns the point
License requirements: None.
- point() - Method in interface nxopen.features.PointFeatureBuilder
-
Returns the point
License requirements: None.
- point() - Method in interface nxopen.features.ScaleBuilder
-
Returns the point as
Point
License requirements: None.
- point - Variable in class nxopen.features.SelectFeature.ValueData
-
selected object point
- point - Variable in class nxopen.features.SelectFlatPattern.ValueData
-
selected object point
- point - Variable in class nxopen.features.SelectPartModule.ValueData
-
selected object point
- point() - Method in interface nxopen.features.sheetmetal.BridgeTransitionBuilder
-
Returns the point with respect to which the finite or symmetric width is specified.
- point() - Method in interface nxopen.features.sheetmetal.FlangeBendPropertiesBuilder
-
Returns the point
License requirements: None.
- POINT - Static variable in class nxopen.features.ShelfBuilder.ReferenceType
-
- point() - Method in interface nxopen.features.shipdesign.AnchorPoint
-
Returns the anchor point.
- point() - Method in interface nxopen.features.shipdesign.PenetrationAssociationBuilder
-
Returns the penetration point
License requirements: None.
- point() - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder
-
Returns the penetrating point
License requirements: None.
- point() - Method in interface nxopen.features.shipdesign.ShipCoordinatesBuilder
-
Returns the point to define ship coordinates.
- POINT - Static variable in class nxopen.features.shipdesign.ShipCoordinatesBuilder.Selection
-
Allows point selection.
- POINT - Static variable in class nxopen.fields.DisplayPropertiesBuilder.IndepDomDispType
-
- POINT - Static variable in class nxopen.fields.DisplayPropertiesBuilder.ValuesEnum
-
- POINT - Static variable in class nxopen.GenericMeasure.Type
-
- point() - Method in interface nxopen.geometricanalysis.FaceAnalysisNormalsBuilder
-
Returns the point to redirect normals
License requirements: None.
- POINT - Static variable in class nxopen.geometricanalysis.GapFlushnessBuilder.EvaluationModes
-
at point
- POINT - Static variable in class nxopen.geometricutilities.GeneralPattern.FromLocationOptions
-
point
- POINT - Static variable in class nxopen.geometricutilities.GeometryLocationData.EntityTypes
-
- point() - Method in interface nxopen.geometricutilities.GeometryLocationData
-
Returns the point
License requirements: None.
- point() - Method in interface nxopen.geometricutilities.PatternReferencePointServiceBuilder
-
Returns the reference point
License requirements: None.
- point - Variable in class nxopen.layout2d.SelectComponent.ValueData
-
selected object point
- POINT - Static variable in class nxopen.LightType
-
A point light emits light equally in all directions.
- point() - Method in interface nxopen.MeasureRectangularExtreme
-
Returns the centroid point of the measurement
License requirements: None.
- point() - Method in interface nxopen.mechatronics.DistanceSensorBuilder
-
Returns the point.
- point() - Method in interface nxopen.mechatronics.HingeJointBuilder
-
Returns the origin point.
- point - Variable in class nxopen.mechatronics.SelectAdapterSignal.ValueData
-
selected object point
- point - Variable in class nxopen.mechatronics.SelectCollisionSensor.ValueData
-
selected object point
- point - Variable in class nxopen.mechatronics.SelectPhysicsConstraint.ValueData
-
selected object point
- point - Variable in class nxopen.mechatronics.SelectPhysicsJoint.ValueData
-
selected object point
- point - Variable in class nxopen.mechatronics.SelectRigidBody.ValueData
-
selected object point
- point - Variable in class nxopen.mechatronics.SelectSystemObject.ValueData
-
selected object point
- point - Variable in class nxopen.mechatronics.SelectTagFormObject.ValueData
-
selected object point
- POINT - Static variable in class nxopen.mfg.am.SupportBuilder.Types
-
- point - Variable in class nxopen.motion.PackagingMeasureBuilder.GeometryData
-
Start point
- point() - Method in interface nxopen.motion.PointOnCurveBuilder
-
Returns the selected point
License requirements: None.
- point() - Method in interface nxopen.motion.PointOnSurfaceBuilder
-
Returns the selected point
License requirements: None.
- point - Variable in class nxopen.motion.SelectAnalyticalContactProperty.ValueData
-
selected object point
- point - Variable in class nxopen.motion.SelectBaseSection.ValueData
-
selected object point
- point - Variable in class nxopen.motion.SelectControlPort.ValueData
-
selected object point
- point - Variable in class nxopen.motion.SelectFieldData.ValueData
-
selected object point
- point - Variable in class nxopen.motion.SelectJoint.ValueData
-
selected object point
- point - Variable in class nxopen.motion.SelectLink.ValueData
-
selected object point
- point - Variable in class nxopen.motion.SelectMarker.ValueData
-
selected object point
- point - Variable in class nxopen.motion.SelectRoad.ValueData
-
selected object point
- point - Variable in class nxopen.motion.SelectSplineBeamProperty.ValueData
-
selected object point
- point - Variable in class nxopen.motion.SelectTirePropertyBasic.ValueData
-
selected object point
- point - Variable in class nxopen.motion.SelectTirePropertyCd.ValueData
-
selected object point
- point - Variable in class nxopen.motion.SelectTirePropertyFt.ValueData
-
selected object point
- point - Variable in class nxopen.motion.SelectTirePropertyMotorcycle.ValueData
-
selected object point
- point - Variable in class nxopen.motion.SelectTirePropertyNonInertial.ValueData
-
selected object point
- point - Variable in class nxopen.motion.SelectTirePropertyTno.ValueData
-
selected object point
- POINT - Static variable in class nxopen.PlaneTypes.MethodType
-
Point method
- Point - Interface in nxopen
-
Represents a smart
Point
.
- POINT - Static variable in class nxopen.positioning.ConstraintReference.GeometryType
-
Point
- POINT - Static variable in class nxopen.preferences.PartObject.ObjectType
-
Point
- POINT - Static variable in class nxopen.PropertyContainer.PropertyType
-
Point
- point() - Method in interface nxopen.RegionPoint
-
Returns the Point
License requirements: None.
- point() - Method in interface nxopen.routing.electrical.AssignProxyBuilder
-
Returns the position of the proxy port to be created.
- point() - Method in interface nxopen.routing.IRoutePosition
-
- point - Variable in class nxopen.routing.SelectControlPoint.ValueData
-
selected object point
- point - Variable in class nxopen.routing.SelectISegment.ValueData
-
selected object point
- point - Variable in class nxopen.routing.SelectLineSegment.ValueData
-
selected object point
- point - Variable in class nxopen.routing.SelectPort.ValueData
-
selected object point
- point - Variable in class nxopen.routing.SelectRun.ValueData
-
selected object point
- point - Variable in class nxopen.routing.SelectStock.ValueData
-
selected object point
- POINT - Static variable in class nxopen.RuleManager.RuleType
-
- point - Variable in class nxopen.SelectBody.ValueData
-
selected object point
- point - Variable in class nxopen.SelectCartesianCoordinateSystem.ValueData
-
selected object point
- point - Variable in class nxopen.SelectCoordinateSystem.ValueData
-
selected object point
- point - Variable in class nxopen.SelectCurve.ValueData
-
selected object point
- point - Variable in class nxopen.SelectDatumPlane.ValueData
-
selected object point
- point - Variable in class nxopen.SelectDisplayableObject.ValueData
-
selected object point
- point - Variable in class nxopen.SelectEdge.ValueData
-
selected object point
- point - Variable in class nxopen.SelectFace.ValueData
-
selected object point
- point - Variable in class nxopen.SelectGroup.ValueData
-
selected object point
- point - Variable in class nxopen.SelectIBaseCurve.ValueData
-
selected object point
- point - Variable in class nxopen.SelectIBody.ValueData
-
selected object point
- point - Variable in class nxopen.SelectICurve.ValueData
-
selected object point
- point - Variable in class nxopen.SelectIParameterizedSurface.ValueData
-
selected object point
- point - Variable in class nxopen.SelectIReferenceAxis.ValueData
-
selected object point
- point - Variable in class nxopen.SelectISurface.ValueData
-
selected object point
- point - Variable in class nxopen.SelectLine.ValueData
-
selected object point
- point - Variable in class nxopen.SelectNXObject.ValueData
-
selected object point
- point - Variable in class nxopen.SelectObject.ValueData
-
selected object point
- point - Variable in class nxopen.SelectPart.ValueData
-
selected object point
- point - Variable in class nxopen.SelectPoint.ValueData
-
selected object point
- point - Variable in class nxopen.SelectSketch.ValueData
-
selected object point
- point - Variable in class nxopen.SelectSmartObject.ValueData
-
selected object point
- point - Variable in class nxopen.SelectSpline.ValueData
-
selected object point
- point - Variable in class nxopen.SelectTaggedObject.ValueData
-
selected object point
- point - Variable in class nxopen.SelectView.ValueData
-
selected object point
- point - Variable in class nxopen.Sketch.ConstraintGeometryHelp
-
Ignored unless type is Point
- POINT - Static variable in class nxopen.Sketch.ConstraintGeometryHelpType
-
- POINT - Static variable in class nxopen.tooling.AddReusablePart.PositionMethod
-
Position by point
- point - Variable in class nxopen.uf.UFCurve.PtSlopeCrvatr
-
- POINT - Static variable in class nxopen.uf.UFDisp.PolyMarker
-
- point - Variable in class nxopen.uf.UFDrf.GdtLeaderData
-
- point - Variable in class nxopen.uf.UFEval.EvaluateData
-
- point - Variable in class nxopen.uf.UFEval.EvaluateUnitVectorsData
-
- POINT - Static variable in class nxopen.uf.UFGdt.GeometricDefinitionType
-
- Point() - Constructor for class nxopen.uf.UFGdt.Point
-
- Point(double[]) - Constructor for class nxopen.uf.UFGdt.Point
-
- point - Variable in class nxopen.uf.UFGdt.TargetDiaArea
-
- point - Variable in class nxopen.uf.UFGdt.TargetRectArea
-
- POINT - Static variable in class nxopen.uf.UFKf.Type
-
- point - Variable in class nxopen.uf.UFModeling.AskExtremeData
-
- point - Variable in class nxopen.uf.UFModeling.AskFaceData
-
- point - Variable in class nxopen.uf.UFModeling.AskFacePropsData
-
- point - Variable in class nxopen.uf.UFModeling.AskFaceSelfIntersectData
-
- point - Variable in class nxopen.uf.UFModl.AskExtrudeOffsetDirData
-
- point - Variable in class nxopen.uf.UFModlFeatures.AskDatumPointAndDirectionData
-
- point - Variable in class nxopen.uf.UFModlGeneral.AskCurvePropsData
-
- point - Variable in class nxopen.uf.UFMotion.PointCurveConstraint
-
- point - Variable in class nxopen.uf.UFRoute.AskSegmentEndPropsData
-
- point - Variable in class nxopen.uf.UFUi.PickPointData
-
- point - Variable in class nxopen.uf.UFUi.PointSubfunctionData
-
- point - Variable in class nxopen.uf.UFWeld.SpotFaceLoc
-
- point - Variable in class nxopen.uf.UFWeld.SpotFaceLocation
-
- point() - Method in interface nxopen.UFSession
-
- POINT - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- POINT - Static variable in class nxopen.validate.RequirementBuilder.DataTypeOptions
-
- point() - Method in interface nxopen.weld.JointmarkPointsBuilder
-
Returns the point at which the feature is created
License requirements: ugweld ("UG WELD")
.
- point - Variable in class nxopen.weld.SelectDatumPin.ValueData
-
selected object point
- point - Variable in class nxopen.weld.SelectDatumSurface.ValueData
-
selected object point
- point1 - Variable in class nxopen.ame.SelectAMEBaseNode.ValueWithSnapData
-
first selected object point
- point1 - Variable in class nxopen.ame.SelectAMEExtendedObject.ValueWithSnapData
-
first selected object point
- point1 - Variable in class nxopen.ame.SelectAMEPort.ValueWithSnapData
-
first selected object point
- point1 - Variable in class nxopen.ame.SelectAspectNode.ValueWithSnapData
-
first selected object point
- point1() - Method in interface nxopen.annotations.Centerline2dBuilder
-
Returns the point 1 of 2D Centerline for centerline by points
License requirements: None.
- point1 - Variable in class nxopen.annotations.SelectAnnotation.ValueWithSnapData
-
first selected object point
- point1 - Variable in class nxopen.annotations.SelectDimension.ValueWithSnapData
-
first selected object point
- point1 - Variable in class nxopen.assemblies.ClearanceSet.InterferenceData
-
a point on the first object
- point1 - Variable in class nxopen.assemblies.SelectComponent.ValueWithSnapData
-
first selected object point
- point1() - Method in interface nxopen.cae.ElementSplitBuilder
-
Returns the point1, one end of line when split by line
License requirements: None.
- point1() - Method in interface nxopen.cae.NodeAlignBuilder
-
Returns the point1 of line
License requirements: None.
- point1 - Variable in class nxopen.cae.SelectCAEBody.ValueWithSnapData
-
first selected object point
- point1 - Variable in class nxopen.cae.SelectCAEEdge.ValueWithSnapData
-
first selected object point
- point1 - Variable in class nxopen.cae.SelectCAEFace.ValueWithSnapData
-
first selected object point
- point1 - Variable in class nxopen.cae.SelectFENode.ValueWithSnapData
-
first selected object point
- point1 - Variable in class nxopen.cam.SelectCAMFeature.ValueWithSnapData
-
first selected object point
- point1 - Variable in class nxopen.DatumPlane.CornerPointsData
-
First corner point of the datum plane
- point1() - Method in interface nxopen.die.DieLimitsBuilder
-
Returns the first limit point.
- point1 - Variable in class nxopen.display.BoundedGridBuilder.CornerPointsData
-
First corner point
- point1 - Variable in class nxopen.display.ImageBaseBuilder.CornerPointsData
-
first corner point of image
- point1 - Variable in class nxopen.display.PlanarShipGridBuilder.ExtentData
-
First corner point
- point1 - Variable in class nxopen.drawings.SelectDraftingView.ValueWithSnapData
-
first selected object point
- point1 - Variable in class nxopen.drawings.SelectDrawingRegion.ValueWithSnapData
-
first selected object point
- point1 - Variable in class nxopen.drawings.SelectDrawingView.ValueWithSnapData
-
first selected object point
- point1 - Variable in class nxopen.drawings.SelectSectionLine.ValueWithSnapData
-
first selected object point
- point1 - Variable in class nxopen.facet.SelectFacetedBody.ValueWithSnapData
-
first selected object point
- point1() - Method in interface nxopen.features.DatumAxisBuilder
-
Returns the first point.
- point1() - Method in interface nxopen.features.FitSurfaceBuilder
-
Returns the first point of the boundary
License requirements: None.
- point1 - Variable in class nxopen.features.MeshSurfaceBuilder.AngleAlignmentPointsData
-
Point 1
- point1 - Variable in class nxopen.features.SelectFeature.ValueWithSnapData
-
first selected object point
- point1 - Variable in class nxopen.features.SelectFlatPattern.ValueWithSnapData
-
first selected object point
- point1 - Variable in class nxopen.features.SelectPartModule.ValueWithSnapData
-
first selected object point
- point1() - Method in interface nxopen.features.shipdesign.PointPairBuilder
-
Returns the first point in the point pair list element.
- point1() - Method in interface nxopen.FourPointSurfaceBuilder
-
Returns the first point
License requirements: None.
- point1 - Variable in class nxopen.layout2d.SelectComponent.ValueWithSnapData
-
first selected object point
- point1 - Variable in class nxopen.mechatronics.SelectAdapterSignal.ValueWithSnapData
-
first selected object point
- point1 - Variable in class nxopen.mechatronics.SelectCollisionSensor.ValueWithSnapData
-
first selected object point
- point1 - Variable in class nxopen.mechatronics.SelectPhysicsConstraint.ValueWithSnapData
-
first selected object point
- point1 - Variable in class nxopen.mechatronics.SelectPhysicsJoint.ValueWithSnapData
-
first selected object point
- point1 - Variable in class nxopen.mechatronics.SelectRigidBody.ValueWithSnapData
-
first selected object point
- point1 - Variable in class nxopen.mechatronics.SelectSystemObject.ValueWithSnapData
-
first selected object point
- point1 - Variable in class nxopen.mechatronics.SelectTagFormObject.ValueWithSnapData
-
first selected object point
- point1 - Variable in class nxopen.motion.SelectAnalyticalContactProperty.ValueWithSnapData
-
first selected object point
- point1 - Variable in class nxopen.motion.SelectBaseSection.ValueWithSnapData
-
first selected object point
- point1 - Variable in class nxopen.motion.SelectControlPort.ValueWithSnapData
-
first selected object point
- point1 - Variable in class nxopen.motion.SelectFieldData.ValueWithSnapData
-
first selected object point
- point1 - Variable in class nxopen.motion.SelectJoint.ValueWithSnapData
-
first selected object point
- point1 - Variable in class nxopen.motion.SelectLink.ValueWithSnapData
-
first selected object point
- point1 - Variable in class nxopen.motion.SelectMarker.ValueWithSnapData
-
first selected object point
- point1 - Variable in class nxopen.motion.SelectRoad.ValueWithSnapData
-
first selected object point
- point1 - Variable in class nxopen.motion.SelectSplineBeamProperty.ValueWithSnapData
-
first selected object point
- point1 - Variable in class nxopen.motion.SelectTirePropertyBasic.ValueWithSnapData
-
first selected object point
- point1 - Variable in class nxopen.motion.SelectTirePropertyCd.ValueWithSnapData
-
first selected object point
- point1 - Variable in class nxopen.motion.SelectTirePropertyFt.ValueWithSnapData
-
first selected object point
- point1 - Variable in class nxopen.motion.SelectTirePropertyMotorcycle.ValueWithSnapData
-
first selected object point
- point1 - Variable in class nxopen.motion.SelectTirePropertyNonInertial.ValueWithSnapData
-
first selected object point
- point1 - Variable in class nxopen.motion.SelectTirePropertyTno.ValueWithSnapData
-
first selected object point
- point1 - Variable in class nxopen.routing.SelectControlPoint.ValueWithSnapData
-
first selected object point
- point1 - Variable in class nxopen.routing.SelectISegment.ValueWithSnapData
-
first selected object point
- point1 - Variable in class nxopen.routing.SelectLineSegment.ValueWithSnapData
-
first selected object point
- point1 - Variable in class nxopen.routing.SelectPort.ValueWithSnapData
-
first selected object point
- point1 - Variable in class nxopen.routing.SelectRun.ValueWithSnapData
-
first selected object point
- point1 - Variable in class nxopen.routing.SelectStock.ValueWithSnapData
-
first selected object point
- point1 - Variable in class nxopen.SelectBody.ValueWithSnapData
-
first selected object point
- point1 - Variable in class nxopen.SelectCartesianCoordinateSystem.ValueWithSnapData
-
first selected object point
- point1 - Variable in class nxopen.SelectCoordinateSystem.ValueWithSnapData
-
first selected object point
- point1 - Variable in class nxopen.SelectCurve.ValueWithSnapData
-
first selected object point
- point1 - Variable in class nxopen.SelectDatumPlane.ValueWithSnapData
-
first selected object point
- point1 - Variable in class nxopen.SelectDisplayableObject.ValueWithSnapData
-
first selected object point
- point1 - Variable in class nxopen.SelectEdge.ValueWithSnapData
-
first selected object point
- point1 - Variable in class nxopen.SelectFace.ValueWithSnapData
-
first selected object point
- point1 - Variable in class nxopen.SelectGroup.ValueWithSnapData
-
first selected object point
- point1 - Variable in class nxopen.SelectIBaseCurve.ValueWithSnapData
-
first selected object point
- point1 - Variable in class nxopen.SelectIBody.ValueWithSnapData
-
first selected object point
- point1 - Variable in class nxopen.SelectICurve.ValueWithSnapData
-
first selected object point
- point1 - Variable in class nxopen.SelectIParameterizedSurface.ValueWithSnapData
-
first selected object point
- point1 - Variable in class nxopen.SelectIReferenceAxis.ValueWithSnapData
-
first selected object point
- point1 - Variable in class nxopen.SelectISurface.ValueWithSnapData
-
first selected object point
- point1 - Variable in class nxopen.SelectLine.ValueWithSnapData
-
first selected object point
- point1 - Variable in class nxopen.SelectNXObject.ValueWithSnapData
-
first selected object point
- point1 - Variable in class nxopen.SelectObject.ValueWithSnapData
-
first selected object point
- point1 - Variable in class nxopen.SelectPart.ValueWithSnapData
-
first selected object point
- point1 - Variable in class nxopen.SelectPoint.ValueWithSnapData
-
first selected object point
- point1 - Variable in class nxopen.SelectSketch.ValueWithSnapData
-
first selected object point
- point1 - Variable in class nxopen.SelectSmartObject.ValueWithSnapData
-
first selected object point
- point1 - Variable in class nxopen.SelectSpline.ValueWithSnapData
-
first selected object point
- point1 - Variable in class nxopen.SelectTaggedObject.ValueWithSnapData
-
first selected object point
- point1 - Variable in class nxopen.SelectView.ValueWithSnapData
-
first selected object point
- point1 - Variable in class nxopen.uf.UFClear.InterfData
-
- point1 - Variable in class nxopen.uf.UFModeling.AskEdgeVertsData
-
- point1 - Variable in class nxopen.uf.UFMotion.SpringDamper
-
- point1 - Variable in class nxopen.uf.UFSf.FindMinimumDistanceData
-
- point1 - Variable in class nxopen.uf.UFStd.StlError
-
- point1 - Variable in class nxopen.weld.SelectDatumPin.ValueWithSnapData
-
first selected object point
- point1 - Variable in class nxopen.weld.SelectDatumSurface.ValueWithSnapData
-
first selected object point
- point1Offset() - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder
-
Returns the offset used to position point 1.
- point2 - Variable in class nxopen.ame.SelectAMEBaseNode.ValueWithSnapData
-
second selected object point
- point2 - Variable in class nxopen.ame.SelectAMEExtendedObject.ValueWithSnapData
-
second selected object point
- point2 - Variable in class nxopen.ame.SelectAMEPort.ValueWithSnapData
-
second selected object point
- point2 - Variable in class nxopen.ame.SelectAspectNode.ValueWithSnapData
-
second selected object point
- point2() - Method in interface nxopen.annotations.Centerline2dBuilder
-
Returns the point 2 of 2D Centerline for centerline by points
License requirements: None.
- point2 - Variable in class nxopen.annotations.SelectAnnotation.ValueWithSnapData
-
second selected object point
- point2 - Variable in class nxopen.annotations.SelectDimension.ValueWithSnapData
-
second selected object point
- point2 - Variable in class nxopen.assemblies.ClearanceSet.InterferenceData
-
a point on the second object
- point2 - Variable in class nxopen.assemblies.SelectComponent.ValueWithSnapData
-
second selected object point
- point2() - Method in interface nxopen.cae.ElementSplitBuilder
-
Returns the point2, the other end of line when split by line
License requirements: None.
- point2() - Method in interface nxopen.cae.NodeAlignBuilder
-
Returns the point2 of line
License requirements: None.
- point2 - Variable in class nxopen.cae.SelectCAEBody.ValueWithSnapData
-
second selected object point
- point2 - Variable in class nxopen.cae.SelectCAEEdge.ValueWithSnapData
-
second selected object point
- point2 - Variable in class nxopen.cae.SelectCAEFace.ValueWithSnapData
-
second selected object point
- point2 - Variable in class nxopen.cae.SelectFENode.ValueWithSnapData
-
second selected object point
- point2 - Variable in class nxopen.cam.SelectCAMFeature.ValueWithSnapData
-
second selected object point
- point2 - Variable in class nxopen.DatumPlane.CornerPointsData
-
Second corner point of the datum plane
- point2() - Method in interface nxopen.die.DieLimitsBuilder
-
Returns the last limit point.
- point2 - Variable in class nxopen.display.BoundedGridBuilder.CornerPointsData
-
Second corner point
- point2 - Variable in class nxopen.display.ImageBaseBuilder.CornerPointsData
-
second corner point of image
- point2 - Variable in class nxopen.display.PlanarShipGridBuilder.ExtentData
-
Second corner point
- point2 - Variable in class nxopen.drawings.SelectDraftingView.ValueWithSnapData
-
second selected object point
- point2 - Variable in class nxopen.drawings.SelectDrawingRegion.ValueWithSnapData
-
second selected object point
- point2 - Variable in class nxopen.drawings.SelectDrawingView.ValueWithSnapData
-
second selected object point
- point2 - Variable in class nxopen.drawings.SelectSectionLine.ValueWithSnapData
-
second selected object point
- point2 - Variable in class nxopen.facet.SelectFacetedBody.ValueWithSnapData
-
second selected object point
- point2() - Method in interface nxopen.features.DatumAxisBuilder
-
Returns the second point.
- point2() - Method in interface nxopen.features.FitSurfaceBuilder
-
Returns the second point of the boundary
License requirements: None.
- point2 - Variable in class nxopen.features.MeshSurfaceBuilder.AngleAlignmentPointsData
-
Point 2
- point2 - Variable in class nxopen.features.SelectFeature.ValueWithSnapData
-
second selected object point
- point2 - Variable in class nxopen.features.SelectFlatPattern.ValueWithSnapData
-
second selected object point
- point2 - Variable in class nxopen.features.SelectPartModule.ValueWithSnapData
-
second selected object point
- point2() - Method in interface nxopen.features.shipdesign.PointPairBuilder
-
Returns the second point in the point pair list element.
- point2() - Method in interface nxopen.FourPointSurfaceBuilder
-
Returns the second point
License requirements: None.
- point2 - Variable in class nxopen.layout2d.SelectComponent.ValueWithSnapData
-
second selected object point
- point2 - Variable in class nxopen.mechatronics.SelectAdapterSignal.ValueWithSnapData
-
second selected object point
- point2 - Variable in class nxopen.mechatronics.SelectCollisionSensor.ValueWithSnapData
-
second selected object point
- point2 - Variable in class nxopen.mechatronics.SelectPhysicsConstraint.ValueWithSnapData
-
second selected object point
- point2 - Variable in class nxopen.mechatronics.SelectPhysicsJoint.ValueWithSnapData
-
second selected object point
- point2 - Variable in class nxopen.mechatronics.SelectRigidBody.ValueWithSnapData
-
second selected object point
- point2 - Variable in class nxopen.mechatronics.SelectSystemObject.ValueWithSnapData
-
second selected object point
- point2 - Variable in class nxopen.mechatronics.SelectTagFormObject.ValueWithSnapData
-
second selected object point
- point2 - Variable in class nxopen.motion.SelectAnalyticalContactProperty.ValueWithSnapData
-
second selected object point
- point2 - Variable in class nxopen.motion.SelectBaseSection.ValueWithSnapData
-
second selected object point
- point2 - Variable in class nxopen.motion.SelectControlPort.ValueWithSnapData
-
second selected object point
- point2 - Variable in class nxopen.motion.SelectFieldData.ValueWithSnapData
-
second selected object point
- point2 - Variable in class nxopen.motion.SelectJoint.ValueWithSnapData
-
second selected object point
- point2 - Variable in class nxopen.motion.SelectLink.ValueWithSnapData
-
second selected object point
- point2 - Variable in class nxopen.motion.SelectMarker.ValueWithSnapData
-
second selected object point
- point2 - Variable in class nxopen.motion.SelectRoad.ValueWithSnapData
-
second selected object point
- point2 - Variable in class nxopen.motion.SelectSplineBeamProperty.ValueWithSnapData
-
second selected object point
- point2 - Variable in class nxopen.motion.SelectTirePropertyBasic.ValueWithSnapData
-
second selected object point
- point2 - Variable in class nxopen.motion.SelectTirePropertyCd.ValueWithSnapData
-
second selected object point
- point2 - Variable in class nxopen.motion.SelectTirePropertyFt.ValueWithSnapData
-
second selected object point
- point2 - Variable in class nxopen.motion.SelectTirePropertyMotorcycle.ValueWithSnapData
-
second selected object point
- point2 - Variable in class nxopen.motion.SelectTirePropertyNonInertial.ValueWithSnapData
-
second selected object point
- point2 - Variable in class nxopen.motion.SelectTirePropertyTno.ValueWithSnapData
-
second selected object point
- point2 - Variable in class nxopen.routing.SelectControlPoint.ValueWithSnapData
-
second selected object point
- point2 - Variable in class nxopen.routing.SelectISegment.ValueWithSnapData
-
second selected object point
- point2 - Variable in class nxopen.routing.SelectLineSegment.ValueWithSnapData
-
second selected object point
- point2 - Variable in class nxopen.routing.SelectPort.ValueWithSnapData
-
second selected object point
- point2 - Variable in class nxopen.routing.SelectRun.ValueWithSnapData
-
second selected object point
- point2 - Variable in class nxopen.routing.SelectStock.ValueWithSnapData
-
second selected object point
- point2 - Variable in class nxopen.SelectBody.ValueWithSnapData
-
second selected object point
- point2 - Variable in class nxopen.SelectCartesianCoordinateSystem.ValueWithSnapData
-
second selected object point
- point2 - Variable in class nxopen.SelectCoordinateSystem.ValueWithSnapData
-
second selected object point
- point2 - Variable in class nxopen.SelectCurve.ValueWithSnapData
-
second selected object point
- point2 - Variable in class nxopen.SelectDatumPlane.ValueWithSnapData
-
second selected object point
- point2 - Variable in class nxopen.SelectDisplayableObject.ValueWithSnapData
-
second selected object point
- point2 - Variable in class nxopen.SelectEdge.ValueWithSnapData
-
second selected object point
- point2 - Variable in class nxopen.SelectFace.ValueWithSnapData
-
second selected object point
- point2 - Variable in class nxopen.SelectGroup.ValueWithSnapData
-
second selected object point
- point2 - Variable in class nxopen.SelectIBaseCurve.ValueWithSnapData
-
second selected object point
- point2 - Variable in class nxopen.SelectIBody.ValueWithSnapData
-
second selected object point
- point2 - Variable in class nxopen.SelectICurve.ValueWithSnapData
-
second selected object point
- point2 - Variable in class nxopen.SelectIParameterizedSurface.ValueWithSnapData
-
second selected object point
- point2 - Variable in class nxopen.SelectIReferenceAxis.ValueWithSnapData
-
second selected object point
- point2 - Variable in class nxopen.SelectISurface.ValueWithSnapData
-
second selected object point
- point2 - Variable in class nxopen.SelectLine.ValueWithSnapData
-
second selected object point
- point2 - Variable in class nxopen.SelectNXObject.ValueWithSnapData
-
second selected object point
- point2 - Variable in class nxopen.SelectObject.ValueWithSnapData
-
second selected object point
- point2 - Variable in class nxopen.SelectPart.ValueWithSnapData
-
second selected object point
- point2 - Variable in class nxopen.SelectPoint.ValueWithSnapData
-
second selected object point
- point2 - Variable in class nxopen.SelectSketch.ValueWithSnapData
-
second selected object point
- point2 - Variable in class nxopen.SelectSmartObject.ValueWithSnapData
-
second selected object point
- point2 - Variable in class nxopen.SelectSpline.ValueWithSnapData
-
second selected object point
- point2 - Variable in class nxopen.SelectTaggedObject.ValueWithSnapData
-
second selected object point
- point2 - Variable in class nxopen.SelectView.ValueWithSnapData
-
second selected object point
- point2 - Variable in class nxopen.uf.UFClear.InterfData
-
- point2 - Variable in class nxopen.uf.UFModeling.AskEdgeVertsData
-
- point2 - Variable in class nxopen.uf.UFMotion.SpringDamper
-
- point2 - Variable in class nxopen.uf.UFSf.FindMinimumDistanceData
-
- point2 - Variable in class nxopen.uf.UFStd.StlError
-
- point2 - Variable in class nxopen.weld.SelectDatumPin.ValueWithSnapData
-
second selected object point
- point2 - Variable in class nxopen.weld.SelectDatumSurface.ValueWithSnapData
-
second selected object point
- Point2d - Class in nxopen
-
Represents two-dimensional cartesian coordinates for a point .
- Point2d() - Constructor for class nxopen.Point2d
-
- Point2d(double, double) - Constructor for class nxopen.Point2d
-
Constructor for the Point2d object.
- point2Offset() - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder
-
Returns the offset used to position point 2.
- POINT3 - Static variable in class nxopen.cam.CAMAttribute.ValueType
-
- point3 - Variable in class nxopen.DatumPlane.CornerPointsData
-
Third corner point of the datum plane
- point3 - Variable in class nxopen.display.BoundedGridBuilder.CornerPointsData
-
Third corner point
- point3 - Variable in class nxopen.display.ImageBaseBuilder.CornerPointsData
-
third corner point of image
- point3 - Variable in class nxopen.display.PlanarShipGridBuilder.ExtentData
-
Third corner point
- point3() - Method in interface nxopen.features.FitSurfaceBuilder
-
Returns the third point of the boundary
License requirements: None.
- point3() - Method in interface nxopen.FourPointSurfaceBuilder
-
Returns the third point
License requirements: None.
- POINT3D - Static variable in class nxopen.issue.IssueProperty.Type
-
3D point type
- Point3d - Class in nxopen
-
Represents three-dimensional cartesian coordinates for a point .
- Point3d() - Constructor for class nxopen.Point3d
-
- Point3d(double, double, double) - Constructor for class nxopen.Point3d
-
Constructor for the Point3d object.
- point4 - Variable in class nxopen.DatumPlane.CornerPointsData
-
Fourth corner point of the datum plane
- point4 - Variable in class nxopen.display.BoundedGridBuilder.CornerPointsData
-
Fourth corner point
- point4 - Variable in class nxopen.display.ImageBaseBuilder.CornerPointsData
-
fourth corner point of image
- point4 - Variable in class nxopen.display.PlanarShipGridBuilder.ExtentData
-
Fourth corner point
- point4() - Method in interface nxopen.features.FitSurfaceBuilder
-
Returns the fourth point of the boundary
License requirements: None.
- point4() - Method in interface nxopen.FourPointSurfaceBuilder
-
Returns the fourth point
License requirements: None.
- Point4d - Class in nxopen
-
Represents four-dimensional homogeneous coordinates for a point.
- Point4d() - Constructor for class nxopen.Point4d
-
- Point4d(double, double, double, double) - Constructor for class nxopen.Point4d
-
Constructor for the Point4d object.
- POINT_ALONG_CURVE - Static variable in class nxopen.features.sheetmetal.SMBoundaryConditionBuilder.ConstraintTypes
-
- POINT_ALONG_CURVE_DISTANCE - Static variable in class nxopen.uf.UFSo.PointAlongCurveOption
-
- POINT_ALONG_CURVE_PERCENT - Static variable in class nxopen.uf.UFSo.PointAlongCurveOption
-
- POINT_AND_ANGLE - Static variable in class nxopen.drawings.SectionLineBuilder.Types
-
Deprecated.
- POINT_AND_ANGLE - Static variable in class nxopen.drawings.SectionViewBuilder.SectionLineType
-
- POINT_AND_DIR - Static variable in class nxopen.features.DatumAxisBuilder.Types
-
Datum axis thru a point and parallel or perpendicular to direction
- POINT_AND_DIRECTION - Static variable in class nxopen.Axis.Types
-
- POINT_AND_LENGTH - Static variable in class nxopen.routing.CreationMethod
-
- POINT_AND_LENGTH - Static variable in class nxopen.routing.Method
-
Cover the given segments a point for a length
- POINT_AND_LENGTH - Static variable in class nxopen.routing.OverstockBuilder.ApplicationType
-
Point And Length
- POINT_AND_VECTOR - Static variable in class nxopen.cam.InspectionOperationTransformBuilder.Line
-
specify a line by a point and a vector
- POINT_AND_VECTOR - Static variable in class nxopen.cam.OperationTransformBuilder.Line
-
specify a line by a point and a vector
- POINT_AND_VECTOR - Static variable in class nxopen.geometricutilities.BoundingObjectBuilder.Method
-
Point and Vector
- POINT_AND_WIDTH - Static variable in class nxopen.cam.TabPointDataBuilder.TabMethodType
-
Point and Width
- POINT_ANGLE - Static variable in class nxopen.features.SectionSurfaceBuilderEx.LinearType
-
Point Angle mode
- POINT_ANGLE_PT - Static variable in class nxopen.uf.UFUi.PointBaseMethod
-
- POINT_APPLICATION_METHOD - Static variable in class nxopen.uf.UFUi.PointBaseMethod
-
- POINT_CENTER_PT - Static variable in class nxopen.uf.UFUi.PointBaseMethod
-
- POINT_CLOUD - Static variable in class nxopen.preferences.PartObject.ObjectType
-
Point Cloud
- POINT_CLOUD_TOO_SPARSE - Static variable in class nxopen.uf.UFConstants
-
- POINT_CONSTRUCTOR - Static variable in class nxopen.cam.InspectionLinearMoveToPointBuilder.PointTypeEnums
-
Use the Point Constructor
- POINT_CONSTRUCTOR - Static variable in class nxopen.cam.InspectionMeasurePointBuilder.PointTypes
-
Use the Point Constructor
- POINT_CONTROL_PT - Static variable in class nxopen.uf.UFUi.PointBaseMethod
-
- POINT_CURSOR_POS - Static variable in class nxopen.uf.UFUi.PointBaseMethod
-
- POINT_DEFINED - Static variable in class nxopen.features.GlobalShapingBuilder.PointMethodType
-
Target point is the given point
- POINT_DENSITY - Static variable in class nxopen.cae.MeshControlBuilder.Types
-
- POINT_DIALOG - Static variable in class nxopen.uf.UFUi.PointBaseMethod
-
- POINT_DIR - Static variable in class nxopen.PlaneTypes.MethodType
-
Point and direction method
- POINT_ELEMENT - Static variable in class nxopen.cae.CaeSetGroupFilterType
-
filter type is 0D element
- POINT_END_PT - Static variable in class nxopen.uf.UFUi.PointBaseMethod
-
- POINT_EXISTING_PT - Static variable in class nxopen.uf.UFUi.PointBaseMethod
-
- POINT_FACE_DISTANCE - Static variable in class nxopen.weld.WeldAdvisorCheckerType
-
point face distance
- POINT_GEOM - Static variable in class nxopen.uf.UFBrep.GeomType
-
- POINT_HELIX - Static variable in class nxopen.cam.InspectionMethodBuilder.OperationTypes
-
Point Helix
- POINT_INFER - Static variable in class nxopen.PlaneTypes.MethodType
-
Inferred Point method
- POINT_INFERRED - Static variable in class nxopen.uf.UFUi.PointBaseMethod
-
- POINT_INTERSECT_PT - Static variable in class nxopen.uf.UFUi.PointBaseMethod
-
- POINT_LIGHT - Static variable in class nxopen.uf.UFView.LightType
-
- POINT_LINK - Static variable in class nxopen.features.WaveLinkBuilder.Types
-
- POINT_MARK_ARC_SPOT - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
-
- POINT_MARK_CLINCH - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
-
- POINT_MARK_CUSTOM1 - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
-
- POINT_MARK_CUSTOM2 - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
-
- POINT_MARK_CUSTOM3 - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
-
- POINT_MARK_CUSTOM4 - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
-
- POINT_MARK_CUSTOM5 - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
-
- POINT_MARK_DOLLOP - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
-
- POINT_MARK_RESISTANCE_SPOT - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
-
- POINT_MARK_WELD_NUT - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
-
- POINT_MARK_WELD_STUD - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
-
- POINT_NO_METHOD - Static variable in class nxopen.uf.UFUi.PointBaseMethod
-
- POINT_OFFSET_CSYS_PT - Static variable in class nxopen.uf.UFUi.PointBaseMethod
-
- POINT_ON_CURVE - Static variable in class nxopen.Sketch.ConstraintType
-
- POINT_ON_CURVE - Static variable in class nxopen.SketchConstraintBuilder.Constraint
-
- POINT_ON_CURVE - Static variable in class nxopen.uf.UFSket.ConType
-
- POINT_ON_CURVE_POINT_TYPE - Static variable in class nxopen.uf.UFDrf.ObjectAssocPointType
-
- POINT_ON_CURVE_PT - Static variable in class nxopen.uf.UFUi.PointBaseMethod
-
- POINT_ON_FACE - Static variable in class nxopen.features.shipdesign.RollingLineBuilder.StartEvaluationTypes
-
Use a point on the selected face to start the evaluation.
- POINT_ON_FIRST_CURVE - Static variable in class nxopen.features.CircularBlendCurveBuilder.CylinderRadiusOption
-
Radius by point on first curve
- POINT_ON_LOOP - Static variable in class nxopen.Sketch.ConstraintType
-
- POINT_ON_LOOP - Static variable in class nxopen.uf.UFSket.ConType
-
- POINT_ON_SECOND_CURVE - Static variable in class nxopen.features.CircularBlendCurveBuilder.CylinderRadiusOption
-
Radius by point on second curve
- POINT_ON_STRING - Static variable in class nxopen.Sketch.ConstraintType
-
- POINT_ON_STRING - Static variable in class nxopen.SketchConstraintBuilder.Constraint
-
- POINT_ON_STRING - Static variable in class nxopen.uf.UFSket.ConType
-
- POINT_ON_SURFACE_PT - Static variable in class nxopen.uf.UFUi.PointBaseMethod
-
- POINT_ONTO_LINE - Static variable in class nxopen.PositioningDimension.Subtype
-
Point onto line dimension
- POINT_ONTO_POINT - Static variable in class nxopen.PositioningDimension.Subtype
-
Point onto point dimension
- POINT_QUADRANT_PT - Static variable in class nxopen.uf.UFUi.PointBaseMethod
-
- POINT_RADIUS_ANGLE_ARC - Static variable in class nxopen.features.SectionSurfaceBuilder.Types
-
Deprecated.
point radius angle arc
- POINT_SET - Static variable in class nxopen.cae.PrimitiveRecipeMeshBuilder.Type
-
Point Set Primitive
- POINT_SET - Static variable in class nxopen.cam.InspectionCurveFeatureBuilder.PointDataDefinitionType
-
A set of points are defined using parameters
- POINT_SET - Static variable in class nxopen.cam.InspectionSurfaceFeatureBuilder.PointDataDefinitionType
-
A set of points are defined using parameters
- POINT_TO_EDGE - Static variable in class nxopen.cae.CAEConnectionBuilder.ConnectionTypeEnum
-
between points and edges
- POINT_TO_EDGE - Static variable in class nxopen.cae.CAEConnectionBuilder.PointToEdgeConnectionMethodTypeEnum
-
Create connection between point on source and target edges.
- POINT_TO_FACE - Static variable in class nxopen.cae.CAEConnectionBuilder.ConnectionTypeEnum
-
between points and faces
- POINT_TO_POINT - Static variable in class nxopen.annotations.DimensionMeasurementBuilder.MeasurementMethod
-
Point to point measurement direction
- POINT_TO_POINT - Static variable in class nxopen.bodydes.OnestepUnformBuilder.Constraint
-
Point to Point Constraint, used for complete unform only
- POINT_TO_POINT - Static variable in class nxopen.cae.CAEConnectionBuilder.ConnectionTypeEnum
-
between points
- POINT_TO_POINT - Static variable in class nxopen.cae.ElementRotateBuilder.MethodType
-
translate by point to point
- POINT_TO_POINT - Static variable in class nxopen.cae.ElementTranslateBuilder.MethodType
-
translate by point to point
- POINT_TO_POINT - Static variable in class nxopen.cae.NodeTranslateBuilder.MethodType
-
point to point
- POINT_TO_POINT - Static variable in class nxopen.drawings.SectionLineBuilder.Types
-
Deprecated.
- POINT_TO_POINT - Static variable in class nxopen.drawings.SectionViewBuilder.SectionLineType
-
- POINT_TO_POINT - Static variable in class nxopen.drawings.ViewPlacementBuilder.Option
-
Align a point in the alignment view to another point in the view being edited
- POINT_TO_POINT - Static variable in class nxopen.features.sheetmetal.SMBoundaryConditionBuilder.ConstraintTypes
-
- POINT_TO_POINT - Static variable in class nxopen.geometricutilities.ModlMotion.Options
-
Move by Point to Point
- POINT_TO_POINT - Static variable in class nxopen.routing.CreationMethod
-
- POINT_TO_POINT - Static variable in class nxopen.routing.Method
-
Cover the given segments from one point to another
- POINT_TO_POINT - Static variable in class nxopen.routing.OverstockBuilder.ApplicationType
-
Point To Point
- POINT_TO_POINT - Static variable in class nxopen.tooling.LayoutRepositionBuilder.Method
-
Point to Point method
- POINT_TO_POINT3D_WELD - Static variable in class nxopen.cae.CAEWeldConnectionBuilder.WeldTypeEnum
-
It's a point to point in-direct weldconnection,3D elements are created during weld connection
- POINT_TO_POINT_CONSTRAINT - Static variable in class nxopen.motion.TextBasedElementBuilder.TypeChoices
-
- POINT_TO_POINT_DIRECT - Static variable in class nxopen.cae.CAEWeldConnectionBuilder.WeldTypeEnum
-
It's a point to point direct weldconnection,mesh points are created during weld connection
- POINT_TO_POINT_INDIRECT - Static variable in class nxopen.cae.CAEWeldConnectionBuilder.WeldTypeEnum
-
It's a point to point in-direct weldconnection,RBE3 elements are created during weld connection
- POINT_VECTOR - Static variable in class nxopen.annotations.AssociativityLineOption
-
Vector from two points
- POINT_VECTOR_LINE_TYPE - Static variable in class nxopen.uf.UFDrf.ObjectAssocLineType
-
- pointA() - Method in interface nxopen.features.VariableOffsetBuilder
-
Returns the point at corner A.
- pointA() - Method in interface nxopen.features.vehicledesign.HeadImpactUpperRoofDetailBuilder
-
Returns the point A additional geometry.
- pointAcs - Variable in class nxopen.uf.UFCamgeom.CustomPoint
-
- pointAFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactUpperRoofDetailBuilder
-
Returns the point A additional geometry flag.
- pointAlongCurve - Variable in class nxopen.uf.UFModlGeneral.AskPointAlongCurve2Data
-
- pointAndAngle() - Method in interface nxopen.drawings.SectionLineBuilder
-
- PointAndAngleSectionLine - Interface in nxopen.drawings
-
Point and Angle Section Line lets you create a view with multiple
segment cuts with no bends.
- PointAndAngleSectionLineBuilder - Interface in nxopen.drawings
-
- pointArclength() - Method in interface nxopen.features.CircularBlendCurveBuilder
-
- pointB() - Method in interface nxopen.features.VariableOffsetBuilder
-
Returns the point at corner B.
- pointB() - Method in interface nxopen.features.vehicledesign.HeadImpactUpperRoofDetailBuilder
-
Returns the point B additional geometry.
- pointBFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactUpperRoofDetailBuilder
-
Returns the point B additional geometry flag.
- pointBrightnessMode() - Method in interface nxopen.display.PointCloudBuilder
-
Returns the point brightness display mode
License requirements: None.
- pointC() - Method in interface nxopen.features.VariableOffsetBuilder
-
Returns the point at corner C.
- pointC() - Method in interface nxopen.features.vehicledesign.HeadImpactUpperRoofDetailBuilder
-
Returns the point C additional geometry.
- pointCFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactUpperRoofDetailBuilder
-
Returns the point C additional geometry flag.
- PointChildBuilder - Interface in nxopen.die
-
Represents a Die Point Child sub feature.
- PointCloud - Interface in nxopen.display
-
Represents a
PointCloud
imported from point data files.
- PointCloudBuilder - Interface in nxopen.display
-
- PointCloudBuilder.BrightnessModes - Class in nxopen.display
-
Specifies point cloud brightness display mode choice.
- PointCloudBuilder.ColorModes - Class in nxopen.display
-
Specifies point cloud color display mode choice.
- PointCloudClippingBoxesListItemBuilder - Interface in nxopen.display
-
- PointCloudClippingBoxesListItemBuilder.ClippingSides - Class in nxopen.display
-
Specifies clipping side options used for defined clipping box.
- PointCloudClippingBoxesListItemBuilderList - Interface in nxopen.display
-
Represents a list of objects.
- PointCloudCollection - Interface in nxopen.display
-
Represents a collection of point cloud objects
To obtain an instance of this class, refer to
BasePart
Created in NX11.0.0
- pointClouds() - Method in interface nxopen.BasePart
-
Returns the Display.PointCloudCollection instance belonging to this part
Created in NX11.0.0
- PointCollection - Interface in nxopen
-
Represents a collection of smart
Point
.
- PointCollection.AlongCurveOption - Class in nxopen
-
- PointCollection.PointOnCurveLocationOption - Class in nxopen
-
- pointColorMode() - Method in interface nxopen.display.PointCloudBuilder
-
Returns the point color display mode
License requirements: None.
- pointConstruct(String, UFUi.PointBaseMethod) - Method in interface nxopen.uf.UFUi
-
- PointConstructData() - Constructor for class nxopen.uf.UFUi.PointConstructData
-
- pointCoordinates() - Method in interface nxopen.annotations.IPointTarget
-
Returns the target point coordinates
License requirements: None.
- pointCoords - Variable in class nxopen.uf.UFGdt.TargetNonPlanarData
-
- pointCount() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns the number of path points
License requirements: None.
- pointCount - Variable in class nxopen.uf.UFDraw.ViewBoundary
-
- pointCount - Variable in class nxopen.uf.UFScop.GetNextDrivePointData
-
- pointCount - Variable in class nxopen.uf.UFSim.ConvertNurbsToPositionData
-
- pointCreate() - Method in interface nxopen.cae.SuppressHoleBuilder
-
Returns the pointcreate
License requirements: None.
- PointCurveConstraint() - Constructor for class nxopen.uf.UFMotion.PointCurveConstraint
-
- PointCurveConstraint(String, int, Tag[], Tag) - Constructor for class nxopen.uf.UFMotion.PointCurveConstraint
-
- pointD() - Method in interface nxopen.features.VariableOffsetBuilder
-
Returns the point at corner D.
- pointD() - Method in interface nxopen.features.vehicledesign.HeadImpactUpperRoofDetailBuilder
-
Returns the point D additional geometry.
- PointData() - Constructor for class nxopen.cam.InspectionPathPointBuilder.PointData
-
- PointData() - Constructor for class nxopen.cam.TurnAvoidancePathPointsBuilder.PointData
-
- PointData() - Constructor for class nxopen.routing.StockOffsetPointBuilder.PointData
-
- pointData - Variable in class nxopen.uf.UFCurve.AskSplineThruPtsData
-
- pointData - Variable in class nxopen.uf.UFGdt.DatumTargetPoint
-
- pointData - Variable in class nxopen.uf.UFModl.BlendEdge
-
- pointDataDefinition() - Method in interface nxopen.cam.InspectionCurveFeatureBuilder
-
Returns the point data definition
License requirements: None.
- pointDataDefinition() - Method in interface nxopen.cam.InspectionSurfaceFeatureBuilder
-
Returns the point data definition type
License requirements: None.
- pointDataFile() - Method in interface nxopen.display.PointCloudBuilder
-
Returns the point cloud data file.
- pointDefines() - Method in interface nxopen.routing.OverstockBuilder
-
- PointDefinition - Class in nxopen.routing
-
Available definitions for the point location for the Point and Length application method
- pointDensity() - Method in interface nxopen.display.PointCloudBuilder
-
Returns the point density
License requirements: None.
- pointDensitySize() - Method in interface nxopen.cae.MeshControlDisplayOptionsBuilder
-
Returns the point density size
License requirements: None.
- pointDetail() - Method in interface nxopen.cam.InspectionAnalyzeOutputBuilder
-
Returns the point detail option
License requirements: None.
- pointDFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactUpperRoofDetailBuilder
-
Returns the point D additional geometry flag.
- pointDistanceTolerance() - Method in interface nxopen.cam.InspectionMeasDataBuilder
-
Returns the distance tolerance when adding points as measured data
License requirements: None.
- pointElementSize() - Method in interface nxopen.cae.MeshControlBuilder
-
Returns the value stored in element size field.
- pointEnd() - Method in interface nxopen.cae.AttachElementsBuilder
-
Returns an end point
License requirements: None.
- Pointer() - Method in class nxopen.uf.UFVariant
-
- pointExitHandler(WeldPointExitBuilder) - Method in interface nxopen.weld.CustomManager.PointExitHandler
-
User defined method that is called whenever a welding features are created through Weld Point command.
- PointFeature - Interface in nxopen.features
-
Represents a point feature
To create or edit an instance of this class, use
PointFeatureBuilder
Created in NX5.0.0
- PointFeatureBuilder - Interface in nxopen.features
-
- pointForRamp() - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
Returns the tangent point for the sweep guide curve
License requirements: None.
- pointfound - Variable in class nxopen.weld.WeldBeadPathBuilder.UpdatePathData
-
Point and evaluation results are valid
- pointFrom() - Method in interface nxopen.tooling.LayoutRepositionBuilder
-
Returns the transform start point
License requirements: None.
- pointFromOrigin() - Method in interface nxopen.features.BlockFeatureBuilder
-
Returns the point which defines values along the x, y axes of the WCS from origin point, when type is two point and height.
- pointHelix() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns a flag to indicate if point helix is allowed
License requirements: None.
- pointIndex() - Method in interface nxopen.cae.xyplot.MarkerModel
-
Returns the point index of marker model.
- pointInFormingRegion() - Method in interface nxopen.features.OvercrownBuilder
-
Returns the point in forming region.
- pointInPlane() - Method in interface nxopen.cae.BushingEADBuilder
-
Returns the get coordinate system data point in plane gets the coordinates of point in x-z plane if cartesian csys or point in azimuthal origin plane if cylindrical/spherical csys for orientation
License requirements: nx_masterfem ("Finite Element Modeling")
.
- pointInPlane() - Method in interface nxopen.cae.ShellEADBuilder
-
Returns the get coordinate system data point in plane gets the coordinates of point in x-z plane if cartesian csys or point in azimuthal origin plane if cylindrical/ spherical csys for material orientation
License requirements: nx_masterfem ("Finite Element Modeling")
.
- pointInRegion() - Method in interface nxopen.die.FillBuilder
-
Returns the point in region of the area fill
License requirements: die_engineering ("DIE ENGINEERING")
.
- pointInRegion() - Method in interface nxopen.die.FlangeTaskBuilder
-
Returns the keep point in the region of the flange task
License requirements: die_engineering ("DIE ENGINEERING")
.
- pointInRegion() - Method in interface nxopen.die.FormTaskBuilder
-
Returns the point in region of the form task.
- pointInRegion() - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder
-
Returns the point in region
License requirements: die_engineering ("DIE ENGINEERING")
.
- pointInRegion() - Method in interface nxopen.tooling.DieEngFormTaskBuilder
-
Returns the point in region
License requirements: None.
- pointInRegion1() - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder
-
Returns the point in region1
License requirements: die_engineering ("DIE ENGINEERING")
.
- pointKey - Variable in class nxopen.uf.UFGdt.TargetNonPlanarData
-
- pointLinkTag - Variable in class nxopen.uf.UFMotion.PointOnSurfaceData
-
- pointList() - Method in interface nxopen.cam.BoundarySet
-
Returns the points list
License requirements: None.
- pointList() - Method in interface nxopen.features.shipdesign.StiffenerSystemBuilder
-
Returns the list of selected or defined points that define the path of the stiffener system.
- pointList() - Method in interface nxopen.motion.SplineBeamBuilder
-
Returns the list of points
License requirements: mechanisms ("MECHANISMS")
.
- PointList - Interface in nxopen
-
Represents a list of objects.
- pointList() - Method in interface nxopen.routing.ManualRouteBuilder
-
Returns the point list
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- pointList() - Method in interface nxopen.routing.QuickPathBuilder
-
Returns the list of path points.
- pointList - Variable in class nxopen.uf.UFDisp.J3dEntity
-
- pointList() - Method in interface nxopen.weld.JointmarkBuilder
-
Returns the list of points
License requirements: ugweld ("UG WELD")
.
- PointListData() - Constructor for class nxopen.cam.TurnAvoidancePathPointsBuilder.PointListData
-
- pointListDataNumberOfTrackPoints() - Method in interface nxopen.cam.TurnAvoidancePathPointsBuilder
-
Returns the number of avoidance path points
License requirements: None.
- PointLocation - Interface in nxopen.cae.connections
-
Location interface.
- pointM() - Method in interface nxopen.features.vehicledesign.HeadImpactUpperRoofDetailBuilder
-
Returns the point M alternative point.
- PointMark - Interface in nxopen.weld
-
Represents a Weld PointMark Feature.
- PointMarkBuilder - Interface in nxopen.weld
-
- PointMarkBuilder.WeldTypes - Class in nxopen.weld
-
The weld type to create.
- pointMarker() - Method in interface nxopen.cae.xyplot.BaseSymbolStyleSetting
-
Returns the point marker
License requirements: None.
- pointMarker() - Method in interface nxopen.cae.xyplot.LeaderStyle
-
Returns the anchor point marker
License requirements: None.
- PointMarker - Class in nxopen.cae.xyplot
-
Represents the point marker
- pointMarkerIdx() - Method in interface nxopen.cae.xyplot.BarChartStyleSetting
-
Returns the point marker
License requirements: None.
- PointMarkPoint - Interface in nxopen.weld
-
Represents a Weld.PointMarkPoint Feature.
- PointMarkPointBuilder - Interface in nxopen.weld
-
- pointMethod() - Method in interface nxopen.features.shipdesign.OrientationPointMethodsBuilder
-
Returns the method used to define the boundary.
- pointMethod() - Method in interface nxopen.features.shipdesign.StiffenerSystemBuilder
-
Returns the method used to define the generated points on the ship structure to define the path of the stiffener system.
- pointMethod() - Method in interface nxopen.weld.WeldPointBuilder
-
Returns the method for creating weld points.
- pointMFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactUpperRoofDetailBuilder
-
Returns the point M alternative point flag.
- pointObject2 - Variable in class nxopen.uf.UFDrf.LineObject
-
- pointOnConveyingSurface() - Method in interface nxopen.linedesigner.SingleElementConveyorBuilder
-
Returns the point on surface of conveyor are return
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- pointOnCurve() - Method in interface nxopen.InferredConstraintsBuilder
-
Returns the point on curve infer-constraint setting.
- pointOnCurve() - Method in interface nxopen.mechatronics.CurveOnCurveJointBuilder
-
Returns the selected point on curve
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- pointOnCurve() - Method in interface nxopen.mechatronics.PathConstraintJointBuilder
-
Returns the selected point on curve
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- pointOnCurve() - Method in interface nxopen.mechatronics.PointOnCurveJointBuilder
-
Returns the selected point on curve
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- PointOnCurve - Interface in nxopen.motion
-
Represents a point on curve
To create or edit an instance of this class, use
PointOnCurveBuilder
Created in NX6.0.0
- pointOnCurve() - Method in interface nxopen.SketchAutoConstrainBuilder
-
Returns the point on curve
License requirements: None.
- PointOnCurveBuilder - Interface in nxopen.motion
-
- PointOnCurveCollection - Interface in nxopen.motion
-
Represents a collection of point on curve objects
To obtain an instance of this class, refer to
MotionManager
Created in NX6.0.0
- PointOnCurveJoint - Interface in nxopen.mechatronics
-
Represents the PointOnCurve Joint.
- PointOnCurveJointBuilder - Interface in nxopen.mechatronics
-
- PointOnCurveJointCollection - Interface in nxopen.mechatronics
-
Represents a collection of PointOnCurve Joint.
- pointOnCurveJoints() - Method in interface nxopen.mechatronics.PhysicsManager
-
- pointOnCurves() - Method in interface nxopen.motion.MotionManager
-
- pointOnEdgeOption() - Method in interface nxopen.cae.WeldBuilder
-
Returns the location of the points on the edge
License requirements: None.
- pointOnFace() - Method in interface nxopen.features.shipdesign.RollingLineBuilder
-
Returns the point specified by the surface selection.
- pointOnGeometry - Variable in class nxopen.annotations.Annotation.AssociativeOriginData
-
Absolute point in absolute space the annotation
is associated with.
- pointOnGeometry - Variable in class nxopen.uf.UFDrf.AssociativeOrigin
-
- pointOnOffsetPlane() - Method in interface nxopen.features.OffsetCurveBuilder
-
Returns the point on offset plane
License requirements: None.
- pointOnPlane() - Method in interface nxopen.assemblies.PlaneSearchTermBuilder
-
Returns
the normal of the plane.
- pointOnRf1 - Variable in class nxopen.uf.UFModl.SmjoggleData
-
- pointOnRf2 - Variable in class nxopen.uf.UFModl.SmjoggleData
-
- pointOnString() - Method in interface nxopen.InferredConstraintsBuilder
-
- PointOnSurface - Interface in nxopen.motion
-
Represents a point on surface motion object
To create or edit an instance of this class, use
PointOnSurfaceBuilder
Created in NX6.0.0
- pointOnSurface - Variable in class nxopen.uf.UFGdt.DatumTargetPoint
-
- PointOnSurfaceBuilder - Interface in nxopen.motion
-
- PointOnSurfaceCollection - Interface in nxopen.motion
-
Represents a collection of Point on Surface objects
To obtain an instance of this class, refer to
MotionManager
Created in NX6.0.0
- PointOnSurfaceData() - Constructor for class nxopen.uf.UFMotion.PointOnSurfaceData
-
- PointOnSurfaceData(Tag, Tag, Tag, int, Tag[], Tag, double, String) - Constructor for class nxopen.uf.UFMotion.PointOnSurfaceData
-
- pointOnSurfaces() - Method in interface nxopen.motion.MotionManager
-
- pointOnSurfaceTag - Variable in class nxopen.uf.UFMotion.PointOnSurfaceData
-
- pointOnZaxis() - Method in interface nxopen.cae.BushingEADBuilder
-
Returns the get coordinate system data point on z axis gets the coordinates of point on z-axis for orientation
License requirements: nx_masterfem ("Finite Element Modeling")
.
- pointOnZaxis() - Method in interface nxopen.cae.ShellEADBuilder
-
Returns the get coordinate system data point on z axis gets the coordinates of point on z-axis for material orientation
License requirements: nx_masterfem ("Finite Element Modeling")
.
- pointOption() - Method in interface nxopen.annotations.Associativity
-
Returns the point option
License requirements: None.
- pointOption() - Method in interface nxopen.cam.WedmPointDefinitionBuilder
-
Returns the point status
License requirements: cam_base ("CAM BASE")
.
- pointOrderEnum() - Method in interface nxopen.cam.InspectionLinkPmiBuilder
-
Returns the point order optimization type enum
License requirements: None.
- pointOrigin() - Method in interface nxopen.cae.BushingEADBuilder
-
Returns the get coordinate system data point origin gets the coordinates of origin point for orientation
License requirements: nx_masterfem ("Finite Element Modeling")
.
- pointOrigin() - Method in interface nxopen.cae.ShellEADBuilder
-
Returns the get coordinate system data point origin gets the coordinates of origin point for material orientation
License requirements: nx_masterfem ("Finite Element Modeling")
.
- pointOrigin() - Method in interface nxopen.mechatronics.PlanarJointBuilder
-
Returns a value that indicates the origin point.
- pointOrigin() - Method in interface nxopen.mechatronics.ScrewJointBuilder
-
Returns a value that indicates the origin point.
- pointOverlay() - Method in interface nxopen.blockstyler.SectionBuilder
-
Returns the PointOverlay
License requirements: None.
- pointOverlay() - Method in interface nxopen.blockstyler.SelectObject
-
Returns the PointOverlay.
- pointOverlay() - Method in interface nxopen.blockstyler.SuperPoint
-
Returns the PointOverlay
License requirements: None.
- pointOverlay() - Method in interface nxopen.blockstyler.SuperSection
-
Returns the PointOverlay
License requirements: None.
- PointPairBuilder - Interface in nxopen.features.shipdesign
-
This class is used to define a pair of points in a list.
- pointPairList() - Method in interface nxopen.features.shipdesign.PillarBuilder
-
Returns the list of pairs of points that define the ends of the pillars.
- pointPairList() - Method in interface nxopen.features.shipdesign.PillarSystemBuilder
-
Returns the list of pairs of points that define the ends of the pillars.
- PointParentBuilder - Interface in nxopen.die
-
Represents a Die Point Parent sub feature.
- pointPattern() - Method in interface nxopen.tooling.StandardPartBuilder
-
Returns the point pattern used to control how to standard parts.
- pointProfileTolerance() - Method in interface nxopen.features.shipdesign.SeamBuilder
-
Returns the distance used to determine if the input point is close enough to the profile curve to be used in the seam definition.
- pointRadiusOfInfluence() - Method in interface nxopen.cae.MeshControlBuilder
-
Returns the value stored in radius of influence field.
- points() - Method in interface nxopen.BasePart
-
Returns the PointCollection instance belonging to this part .
- points() - Method in interface nxopen.cae.MeshPointProjectBuilder
-
- POINTS - Static variable in class nxopen.cae.ResultProbeBuilder.SelectionType
-
- POINTS - Static variable in class nxopen.cam.DmRotaryFloorFinishBuilder.DmSurfCutStepTypes
-
Number
- POINTS - Static variable in class nxopen.cam.DmSurfBuilder.DmSurfCutStepType
-
Number
- POINTS - Static variable in class nxopen.cam.DPMItpBuilder.StepMethodOption
-
- POINTS - Static variable in class nxopen.cam.InspectionGraphicalReportBuilder.GraphicalReportFilterType
-
Point based
- POINTS - Static variable in class nxopen.cam.InspectionMeasDataBuilder.InputFormatType
-
NX points
- POINTS - Static variable in class nxopen.cam.InspectionPatternFeatureBuilder.FeatureFilterTypes
-
Only point inspection features will be listed
- POINTS - Static variable in class nxopen.cam.NcmPlanarEngRetBuilder.EngRetTypes
-
to-from points
- POINTS - Static variable in class nxopen.cam.NcmScEngRetBuilder.EngRetTypes
-
to-from point
- points - Variable in class nxopen.cam.SpunOutlineGeom.PlanesThroughPointsData
-
array of start points for each set
- POINTS - Static variable in class nxopen.cam.TurnAvoidanceApproachBuilder.ApproachPathModes
-
Path is defined by points.
- POINTS - Static variable in class nxopen.cam.TurnAvoidanceDepartureBuilder.DeparturePathModes
-
Path is defined by points.
- POINTS - Static variable in class nxopen.die.SpringbackCompensationBuilder.DefinedByType
-
Points .
- points - Variable in class nxopen.DisplayManager.J3dGeometryData
-
polygon/vector points
- POINTS - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide points
- POINTS - Static variable in class nxopen.features.shipdesign.PillarBuilder.CreationMethod
-
- POINTS - Static variable in class nxopen.features.shipdesign.PillarSystemBuilder.Types
-
- POINTS - Static variable in class nxopen.features.shipdesign.StiffenerSystemBuilder.PointMethods
-
- POINTS - Static variable in class nxopen.features.shipdesign.StiffenerSystemBuilder.Types
-
- points() - Method in interface nxopen.features.WavePointBuilder
-
Returns the point to link
License requirements: None.
- POINTS - Static variable in class nxopen.geometricutilities.AlignmentMethodBuilder.Type
-
- points - Variable in class nxopen.routing.RouteManager.GenerateCablewaysLayoutData
-
- points - Variable in class nxopen.tooling.ReusePositioningObjectBuilder.NonStandardPointsData
-
- POINTS - Static variable in class nxopen.tooling.UndersizeBuilder.Orbit
-
specify points
- points - Variable in class nxopen.uf.UFClone.AskCvtCallbacksData
-
- points - Variable in class nxopen.uf.UFClone.AskNtfyCallbacksData
-
- POINTS - Static variable in class nxopen.uf.UFDieeng.Opts
-
- points - Variable in class nxopen.uf.UFDrf.IntermediatePoints
-
- points - Variable in class nxopen.uf.UFEval.AskSplineControlPtsData
-
- points - Variable in class nxopen.uf.UFModeling.AskPointsParmsData
-
- points - Variable in class nxopen.uf.UFModl.BsurfRowInfo
-
- points - Variable in class nxopen.uf.UFUi.SelectPointCollectionData
-
- POINTS - Static variable in class nxopen.weld.JointmarkBuilder.Method
-
Points
- POINTS - Static variable in class nxopen.weld.WeldPointExitBuilder.MethodUsed
-
Feature was created using the points method.
- POINTS_AFTER_TOOL_CHANGE - Static variable in class nxopen.cam.TurnAvoidanceApproachBuilder.ApproachPathModes
-
Path is defined by points, but applied only after tool change.
- POINTS_BEFORE_TOOL_CHANGE - Static variable in class nxopen.cam.TurnAvoidanceDepartureBuilder.DeparturePathModes
-
Path is defined by points, but applied only before tool change.
- POINTS_ON_CURVES - Static variable in class nxopen.formboard.PathLengthAnnotationBuilder.Types
-
TODO
- POINTS_ON_CURVES - Static variable in class nxopen.GenericMeasure.Type
-
- POINTS_ON_CURVES - Static variable in class nxopen.MeasureDistanceBuilder.DistanceType
-
- pointSelection() - Method in interface nxopen.cae.CfdLocalResolutionConstraintBuilder
-
Returns the point selection
License requirements: None.
- pointSelection() - Method in interface nxopen.mechanicalrouting.EditPointBuilder
-
Returns the routing objects that are being edited.
- pointSelection() - Method in interface nxopen.mfg.am.SupportBuilder
-
Returns the point selection
License requirements: None.
- pointSelection() - Method in interface nxopen.routing.StockOffsetPointBuilder
-
Returns the point selection.
- PointSelectionRecipe - Interface in nxopen.cae
-
Represents a single node selection recipe based on coordinates of a point
To obtain an instance of this object use one of the creators in
SelectionRecipeCollection
.
- pointselectionupdated - Variable in class nxopen.weld.JointmarkBuilder.FromReuseFeaturesData
-
Indicates if point selection object was updated.
- pointSelector() - Method in interface nxopen.cam.InspectionCurveFeatureBuilder
-
Returns the user specified point selector
License requirements: None.
- pointSelector() - Method in interface nxopen.cam.InspectionSurfaceFeatureBuilder
-
Returns the user specified point selector
License requirements: None.
- pointSequence() - Method in interface nxopen.cam.InspectionPolarGridBuilder
-
Returns the point sequence mode
License requirements: None.
- pointSequenceDirection() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns the point sequence start direction
License requirements: None.
- pointSequenceDirection() - Method in interface nxopen.cam.InspectionUVGridBuilder
-
Returns the point sequence start direction
License requirements: None.
- pointSequenceMode() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns the point sequence mode
License requirements: None.
- pointSequenceMode() - Method in interface nxopen.cam.InspectionUVGridBuilder
-
Returns the point sequence mode
License requirements: None.
- pointSequenceStart() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns the point sequence start location
License requirements: None.
- pointSequenceStart() - Method in interface nxopen.cam.InspectionUVGridBuilder
-
Returns the point sequence start location
License requirements: None.
- PointSeriesLocation - Interface in nxopen.cae.connections
-
Location interface.
- PointSet - Interface in nxopen.features
-
Represents a point set feature
To create or edit an instance of this class, use
PointSetBuilder
Created in NX6.0.0
- PointSetAlignmentBuilder - Interface in nxopen.geometricutilities
-
- PointSetAlignmentBuilder.ConstraintOptions - Class in nxopen.geometricutilities
-
Constraint Options
- PointSetBuilder - Interface in nxopen.features
-
- PointSetBuilder.CurvePointsType - Class in nxopen.features
-
The settings for the curve points definition.
- PointSetBuilder.FacePointsType - Class in nxopen.features
-
The settings for the face points definition.
- PointSetBuilder.PatternLimitsType - Class in nxopen.features
-
The settings for the pattern limit definition.
- PointSetBuilder.SplinePointsType - Class in nxopen.features
-
The settings for the spline points definition.
- PointSetBuilder.Types - Class in nxopen.features
-
The settings for the type of Point Set feature.
- PointSetFacePercentageBuilder - Interface in nxopen.features
-
- PointSetFacePercentageBuilderList - Interface in nxopen.features
-
Represents a list of objects.
- PointsFromFileBuilder - Interface in nxopen.geometricutilities
-
- PointsFromFileBuilder.Options - Class in nxopen.geometricutilities
-
Coordinate option
- pointsGuideDistance() - Method in interface nxopen.weld.WeldPointBuilder
-
Returns the distance percentage from the start of the curve where the
weld point should be. 0.0 is the start of the curve
100.0 is the end of the curve.
- pointSize() - Method in interface nxopen.display.PointCloudBuilder
-
Returns the point size
License requirements: None.
- pointsList() - Method in interface nxopen.cae.MeshPointProjectBuilder
-
Returns the points selection list
License requirements: None.
- pointSource() - Method in interface nxopen.cae.NodeTranslateBuilder
-
Returns the source point
License requirements: None.
- pointSpecify() - Method in interface nxopen.tooling.UndersizeBuilder
-
Returns the reference point which is the center of the distribution circle
License requirements: None.
- pointsPerStrip - Variable in class nxopen.DisplayManager.J3dGeometryData
-
points for each triangle strip
- pointsPerStrip - Variable in class nxopen.uf.UFDisp.J3dEntity
-
- pointsSelection() - Method in interface nxopen.cae.WeldBuilder
-
Returns the point(s) used to specify the location of the weld
License requirements: None.
- pointsSelection() - Method in interface nxopen.linedesigner.PickRectanglePointsBuilder
-
Returns the points of selection are return
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- pointStart() - Method in interface nxopen.cae.AttachElementsBuilder
-
Returns a start point
License requirements: None.
- pointStatus() - Method in interface nxopen.cam.NcmAvoidancePointBuilder
-
Returns the point status
License requirements: None.
- pointstatus - Variable in class nxopen.cam.TurnAvoidancePathPointsBuilder.PointData
-
the point status
- pointString() - Method in interface nxopen.features.AOCSBuilder
-
Returns the point string
License requirements: solid_modeling ("SOLIDS MODELING") OR insp_programming ("INSPECTION PROGRAMMING")
.
- pointSubFunction() - Method in interface nxopen.tooling.SectionLineCreationBuilder
-
Define the cut segment position
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- pointSubfunction(String, int[], int) - Method in interface nxopen.uf.UFUi
-
- PointSubfunctionData() - Constructor for class nxopen.uf.UFUi.PointSubfunctionData
-
- PointSubfunctionReturn - Variable in class nxopen.uf.UFUi.PointSubfunctionData
-
- pointTag - Variable in class nxopen.uf.UFCamgeom.CustomPoint
-
- pointTag - Variable in class nxopen.uf.UFMotion.PointOnSurfaceData
-
- pointTag - Variable in class nxopen.uf.UFUi.PointConstructData
-
- PointTarget - Interface in nxopen.annotations
-
Represents point datum target
To create or edit an instance of this class, use
PmiDatumTargetBuilder
Created in NX4.0.0
- pointTarget() - Method in interface nxopen.cae.NodeTranslateBuilder
-
Returns the target point
License requirements: None.
- pointTo() - Method in interface nxopen.tooling.LayoutRepositionBuilder
-
Returns the transform end point
License requirements: None.
- pointToEdgeConnectionMethodType() - Method in interface nxopen.cae.CAEConnectionBuilder
-
Returns the method type for point-to-edge connection
License requirements: None.
- pointToPoint() - Method in interface nxopen.drawings.SectionLineBuilder
-
- PointToPointBuilder - Interface in nxopen.cam
-
- PointToPointSectionLine - Interface in nxopen.drawings
-
Point to Point Section Line lets you create a view with multiple
segment cuts with no bends.
- PointToPointSectionLineBuilder - Interface in nxopen.drawings
-
- pointToProjectToward() - Method in interface nxopen.features.ProjectCurveBuilder
-
Returns the point to project toward
License requirements: None.
- pointType() - Method in interface nxopen.cam.EditSubopCommand
-
Returns the point type
License requirements: None.
- pointType() - Method in interface nxopen.cam.LaserPiercingPoint
-
Returns the Piercing Point Type
License requirements: None.
- pointType - Variable in class nxopen.routing.StockOffsetPointBuilder.PointData
-
Type of point currently defined.
- pointType - Variable in class nxopen.Sketch.ConstraintGeometry
-
- pointType - Variable in class nxopen.uf.UFDrf.ObjectAssocData
-
- pointTypeEnum() - Method in interface nxopen.cam.InspectionLinearMoveToPointBuilder
-
Returns the point type enum
License requirements: None.
- pointTypeEnum() - Method in interface nxopen.cam.InspectionMeasurePointBuilder
-
Returns the point type enum
License requirements: None.
- pointV1() - Method in interface nxopen.features.vehicledesign.VisionPlaneBuilder
-
Returns the point v1; select one point when eye type specified.
- pointV1() - Method in interface nxopen.features.vehicledesign.WindshieldDatumBuilder
-
Returns the point v1; select one point when eye type specified.
- pointV2() - Method in interface nxopen.features.vehicledesign.VisionPlaneBuilder
-
Returns the point v2; select one point when eye type specified.
- pointV2() - Method in interface nxopen.features.vehicledesign.WindshieldDatumBuilder
-
Returns the point v2; select one point when eye type specified.
- pointValue() - Method in interface nxopen.cae.responsesimulation.ResponseResultsEvaluationSettingBuilder
-
Returns the method choosed to define select point value.
- pointValue() - Method in interface nxopen.Expression
-
Returns the point value of the expression.
- pointWithMaxError - Variable in class nxopen.uf.UFCurve.FitError
-
- pointX() - Method in interface nxopen.cam.InspectionEdgePointFeatureBuilder
-
Returns the point X coordinate
License requirements: None.
- pointX() - Method in interface nxopen.cam.InspectionLinearMoveToPointBuilder
-
Returns the point X coordinate
License requirements: None.
- pointX() - Method in interface nxopen.cam.InspectionPointFeatureBuilder
-
Returns the point X coordinate
License requirements: None.
- pointX - Variable in class nxopen.HumanPosturePredictionBuilder.SgrpCoordinatesData
-
the length coordinates L31 expression
- pointY() - Method in interface nxopen.cam.InspectionEdgePointFeatureBuilder
-
Returns the point Y coordinate
License requirements: None.
- pointY() - Method in interface nxopen.cam.InspectionLinearMoveToPointBuilder
-
Returns the point Y coordinate
License requirements: None.
- pointY() - Method in interface nxopen.cam.InspectionPointFeatureBuilder
-
Returns the point Y coordinate
License requirements: None.
- pointY - Variable in class nxopen.HumanPosturePredictionBuilder.SgrpCoordinatesData
-
the width coordinates W20 expression
- pointZ() - Method in interface nxopen.cam.InspectionEdgePointFeatureBuilder
-
Returns the point Z coordinate
License requirements: None.
- pointZ() - Method in interface nxopen.cam.InspectionLinearMoveToPointBuilder
-
Returns the point Z coordinate
License requirements: None.
- pointZ() - Method in interface nxopen.cam.InspectionPointFeatureBuilder
-
Returns the point Z coordinate
License requirements: None.
- pointZ - Variable in class nxopen.HumanPosturePredictionBuilder.SgrpCoordinatesData
-
the height coordinates H70 expression
- POISSON - Static variable in class nxopen.motion.BodyContactAdams.ForceModel
-
- POISSON - Static variable in class nxopen.motion.BodyContactRecurdyn.ForceModel
-
- poissonRatio() - Method in interface nxopen.motion.CustomizedMaterialBuilder
-
Returns the Poisson ratio
License requirements: mechanisms ("MECHANISMS")
.
- poissonRatioFromBulkLame(double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the poisson ratio from bulk modulus and 1st Lame constant.
- poissonRatioFromShearBulk(double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the poisson ratio from shear modulus and bulk modulus.
- poissonRatioFromShearLame(double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the poisson ratio from shear modulus and 1st Lame constant.
- poissonRatioFromYoungsBulk(double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the poisson ratio from bulk modulus and youngs modulus.
- poissonRatioFromYoungsLame(double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the poisson ratio from youngs modulus and 1st Lame constant.
- poissonRatioFromYoungsShear(double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the poisson ratio from youngs modulus and shear modulus.
- poissonsRatio() - Method in interface nxopen.features.sheetmetal.MetaformBuilder
-
Returns the Poisson's ratio
License requirements: None.
- POLAR - Static variable in class nxopen.cae.xyplot.ComplexOption2D
-
Polar for 2D plot
- POLAR - Static variable in class nxopen.cam.InspectionSensorBuilder.SensorTipLocationTypes
-
Polar
- POLAR - Static variable in class nxopen.preferences.WorkPlane.Grid
-
Polar Grid
- POLAR - Static variable in class nxopen.sim.KinematicChain.Types
-
Polar
- POLAR3D - Static variable in class nxopen.cae.xyplot.ComplexOption2D
-
Polar for 3D plot
- POLAR_ANGLE - Static variable in class nxopen.GenericMeasure.Type
-
- POLAR_ANGLE - Static variable in class nxopen.MeasureManager.ExtremeType
-
- POLAR_AREA - Static variable in class nxopen.GenericMeasure.Type
-
- POLAR_AREA - Static variable in class nxopen.MeasureManager.ExtremeType
-
- POLAR_GRID - Static variable in class nxopen.cam.InspectionMethodBuilder.OperationTypes
-
Circular Point Set (Polar Grid)
- POLAR_GRID - Static variable in class nxopen.uf.UFDisp.GridType
-
- POLAR_RADIUS - Static variable in class nxopen.GenericMeasure.Type
-
- POLAR_RADIUS - Static variable in class nxopen.MeasureManager.ExtremeType
-
- polarGrid() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns a flag to indicate if circular point grid is allowed
License requirements: None.
- polarGridEmphasis - Variable in class nxopen.uf.UFDisp.Grid
-
- PolarGridSize() - Constructor for class nxopen.preferences.WorkPlane.PolarGridSize
-
- PolarGridSize(WorkPlane.GridSize, WorkPlane.GridSize) - Constructor for class nxopen.preferences.WorkPlane.PolarGridSize
-
Constructor for the PolarGridSize object.
- polarPointSequence() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns the polar point sequence mode
License requirements: None.
- polarSequenceDirection() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns the polar sequence direction
License requirements: None.
- polarSequenceStart() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns the polar sequence start location
License requirements: None.
- polarShowMajorLines() - Method in interface nxopen.preferences.WorkPlane
-
Returns the show major lines flag for polar grid
License requirements: None.
- POLE - Static variable in class nxopen.annotations.AssociativityPointOption
-
Spline pole
- POLE - Static variable in class nxopen.geometricanalysis.CurveAnalysisDisplay.ShowFlagType
-
Deprecated.
show pole
- POLE - Static variable in class nxopen.geometricanalysis.SurfaceAnalysisDisplay.ShowFlagType
-
show pole
- POLE - Static variable in class nxopen.InferSnapType.SnapType
-
Snap point at pole
- poleCount() - Method in interface nxopen.Spline
-
Returns the number of poles, includes the duplicates in case of periodic spline.
- poleDisplayColor() - Method in interface nxopen.preferences.SessionModeling
-
Returns the color for display poles for B curves.
- poleDisplayInheritColor() - Method in interface nxopen.preferences.SessionModeling
-
Returns the pole color inherit option, for display with B curves.
- poleDisplayState() - Method in interface nxopen.DisplayModification
-
Returns the flag for pole display.
- poleDisplayStyle() - Method in interface nxopen.preferences.SessionModeling
-
Returns the style (3D ball, 2D disk, mark, etc.) of the poles for display of B curves.
- poleEditColor() - Method in interface nxopen.preferences.SessionModeling
-
Returns the color for editing poles for B curves and B surfaces.
- poleEditInheritColor() - Method in interface nxopen.preferences.SessionModeling
-
Returns the pole color inherit option, for editing B curves and B surfaces.
- poleEditStyle() - Method in interface nxopen.preferences.SessionModeling
-
Returns the style (3D ball, 2D disk, mark, etc.) of the poles for editing B curves and B surfaces.
- poleFixup - Variable in class nxopen.uf.UFModlGeneral.Cre2dtrimBsurfData
-
- poleFixup - Variable in class nxopen.uf.UFModlGeneral.CreateBsEdgesData
-
- poleFixup - Variable in class nxopen.uf.UFModlGeneral.CreateBsurfData
-
- poleFixup - Variable in class nxopen.uf.UFModlGeneral.CreateSplineData
-
- poleFixup - Variable in class nxopen.uf.UFModlGeneral.CreTrimBsurfData
-
- poleManager() - Method in interface nxopen.features.EdgeSymmetryBuilder
-
Returns the pole manager.
- poleMoveDirectionEnum() - Method in interface nxopen.features.MatchEdgeBuilder
-
Returns the value indicating the direction of pole movement
License requirements: None.
- poleMoveDirectionVector() - Method in interface nxopen.features.MatchEdgeBuilder
-
Returns the pole move direction vector
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- poleMovementConstraintType() - Method in interface nxopen.features.MatchEdgeBuilder
-
Returns the value indicating type of pole movement constraint
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- POLES - Static variable in class nxopen.features.PointSetBuilder.SplinePointsType
-
Points will be created at spline pole points.
- poles() - Method in interface nxopen.features.PoleSmoothingBuilder
-
- poles - Variable in class nxopen.geometricutilities.ControlPoleManagerData.PolesData
-
Poles
- poles - Variable in class nxopen.uf.UFCurve.Spline
-
- poles - Variable in class nxopen.uf.UFModl.Bsurface
-
- PolesData() - Constructor for class nxopen.geometricutilities.ControlPoleManagerData.PolesData
-
- polesindex - Variable in class nxopen.geometricutilities.ControlPoleManagerData.PolesData
-
Poles index
- PoleSmoothing - Interface in nxopen.features
-
Represents a pole smoothing feature
To create or edit an instance of this class, use
PoleSmoothingBuilder
Created in NX6.0.0
- PoleSmoothingBuilder - Interface in nxopen.features
-
- POLYGON - Static variable in class nxopen.features.StudioSplineBuilderEx.MovementMethodType
-
Movement along a relevant control polygon segment
- POLYGON - Static variable in class nxopen.features.StudioXformBuilderEx.MovementMethodType
-
Translate in polygon direction
- POLYGON - Static variable in class nxopen.geometricutilities.MovePoleBuilder.MoveMethodType
-
- POLYGON - Static variable in class nxopen.geometricutilities.PatternDefinition.PatternEnum
-
polygon pattern.
- POLYGON - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.FacetType
-
The facet topology is a polygon facet
- POLYGON_BODIES - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide polygon bodies
- POLYGON_COUNT_PER_SIDE - Static variable in class nxopen.geometricutilities.PatternSpacing.SpacingType
-
This is for Polygon type.
- POLYGON_PITCH_ALONG_SIDE - Static variable in class nxopen.geometricutilities.PatternSpacing.SpacingType
-
This is for Polygon type.
- POLYGONAL - Static variable in class nxopen.display.CameraBuilder.LensFlare
-
polygonal
- polygonBodies - Variable in class nxopen.uf.UFSf.AskAllPolygonBodiesData
-
- polygonBodyAskType(Tag) - Method in interface nxopen.uf.UFSf
-
- polygonBodyDelete(CAEBody) - Method in interface nxopen.cae.FemPart
-
DELETE on polygon body
License requirements: nx_masterfem ("Finite Element Modeling")
.
- polygonBodySelection() - Method in interface nxopen.cae.FaceFromBoundaryBuilder
-
Returns the polygon body selection to assign the newly created face
License requirements: None.
- polygonDefinition() - Method in interface nxopen.geometricutilities.PatternDefinition
-
Returns the polygon definition.
- PolygonFaceOnMeshBuilder - Interface in nxopen.cae
-
- PolygonFaceOnMeshBuilder.PolygonFaceOnMeshType - Class in nxopen.cae
-
Represents the polygon face on mesh type to be used
- PolygonFaceOnMeshBuilder.SelectBodyMethod - Class in nxopen.cae
-
Represents the select body option to be used
- polygonFaceSelect() - Method in interface nxopen.cae.DeletePolygonFaceBuilder
-
Returns the faces to delete
License requirements: None.
- polygonGenerationSeconds - Variable in class nxopen.ModelingViewHighQualityImage.ImageCountsData
-
Number of seconds to generate the polygons
- PolygonGeometryManager - Interface in nxopen.cae
-
- PolygonGeometryManager.PolygonBodyResolutionType - Class in nxopen.cae
-
Entity type
- polygonGeometryMgr() - Method in interface nxopen.cae.FemPart
-
Returns the geometry recipe collection belonging to this fem part .
- PolygonModelingBuilder - Interface in nxopen.facet
-
- PolygonModelingBuilder.ConvertTypes - Class in nxopen.facet
-
the conversion type
- PolygonModelingTaskEnvironment - Interface in nxopen
-
Represents the Polygon Modeling task environment associated with a session.
- polygonModelingTaskEnvironment() - Method in interface nxopen.Session
-
- polygonOrientationOption() - Method in interface nxopen.geometricutilities.PatternOrientation
-
Returns the orientationOption for Polygon pattern type
License requirements: None.
- PolygonPattern - Interface in nxopen.geometricutilities
-
the polygon pattern definition.
- PolygonPattern.SizeOptions - Class in nxopen.geometricutilities
-
defines polygon size options for polygon type pattern.
- PolygonPatternSpacing - Interface in nxopen.geometricutilities
-
defines the various ways pattern instances can be
spaced within the pattern, particularly in the context of the
PatternDefinition class.
- polygonSizeOption() - Method in interface nxopen.geometricutilities.PolygonPattern
-
Returns the polygon size option
License requirements: None.
- polygonSpacing() - Method in interface nxopen.geometricutilities.PolygonPattern
-
Returns the polygon spacing of the instances of the pattern
License requirements: None.
- POLYLINE - Static variable in class nxopen.linedesigner.PlatformEquipmentBuilder.OutlineTypeAPI
-
- Polyline - Interface in nxopen.markup
-
- Polyline - Interface in nxopen
-
Represents a polyline curve.
- Polyline.LineOption - Class in nxopen.markup
-
- POLYLINE2D - Static variable in class nxopen.DxfdwgCreator.ExportSplinesAsOptions
-
export faces as facets
- POLYLINE3D - Static variable in class nxopen.DxfdwgCreator.ExportSplinesAsOptions
-
export faces as polyline mesh
- POLYLINE_MESH - Static variable in class nxopen.DxfdwgCreator.ExportFacesAsOptions
-
export faces as polyline mesh
- PolylineBuilder - Interface in nxopen.features
-
Polyline builder class.
- PolylineBuilder.DrawingPlaneOptions - Class in nxopen.features
-
Drawing plane options
- PolylineBuilder.MovementMethodType - Class in nxopen.features
-
Points movement types
- PolylineBuilder.WCSOptionType - Class in nxopen.features
-
WCS principal axis or plane types
- PolylineCollection - Interface in nxopen
-
Represents a collection of polylines.
- polylineDisplayColor() - Method in interface nxopen.preferences.SessionModeling
-
Returns the color for display polylines for B curves and B surfaces
License requirements: None.
- polylineDisplayInheritColor() - Method in interface nxopen.preferences.SessionModeling
-
Returns the polyline color inherit option, for display with B curves and B surfaces.
- polylineDisplayStyle() - Method in interface nxopen.preferences.SessionModeling
-
Returns the style (solid, dashed, etc.) of the polylines display for B curves and B surfaces.
- polylineEditColor() - Method in interface nxopen.preferences.SessionModeling
-
Returns the color for editing polylines for B curves and B surfaces.
- polylineEditInheritColor() - Method in interface nxopen.preferences.SessionModeling
-
Returns the polyline color inherit option, for editing B curves and B surfaces.
- polylineEditStyle() - Method in interface nxopen.preferences.SessionModeling
-
Returns the style (solid, dashed, etc.) of the polylines for editing B curves and B surfaces.
- polylines() - Method in interface nxopen.BasePart
-
Returns the PolylineCollection instance belonging to this part .
- POLYLINES - Static variable in class nxopen.CGMBuilder.OutputTextOption
-
Text is exported as polylines
- POLYLINES - Static variable in class nxopen.PrintPDFBuilder.OutputTextOption
-
Text is exported as polylines
- polylineSuperSection() - Method in interface nxopen.linedesigner.PlatformEquipmentBuilder
-
Returns the polyline section for platform
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- POLYMERS - Static variable in class nxopen.PhysicalMaterial.Category
-
Polymers
- POLYNOMIAL - Static variable in class nxopen.motion.DriverOperation.Type
-
Polynomial
- POLYNOMIAL - Static variable in class nxopen.PhysicalMaterial.Type
-
Polynomial
- POLYNOMIAL_CUBIC - Static variable in class nxopen.features.ExtractFaceBuilder.FaceSurfaceType
-
extracted surface is a cubic polynomial approximation of the original surface
- popAreas(int) - Method in interface nxopen.userdefinedobjects.UserDefinedObject
-
Removes the areas stored at the end of the area array for this UDO,
and returns them in an array
License requirements: None.
- popContext() - Method in interface nxopen.uf.UFHelp
-
- popDoubles(int) - Method in interface nxopen.userdefinedobjects.UserDefinedObject
-
Removes the doubles stored at the end of the double array for this UDO,
and returns them in an array
License requirements: None.
- popIntegers(int) - Method in interface nxopen.userdefinedobjects.UserDefinedObject
-
Removes the integers stored at the end of the integer array for this UDO,
and returns them in an array
License requirements: None.
- popLengths(int) - Method in interface nxopen.userdefinedobjects.UserDefinedObject
-
Removes the lengths stored at the end of the length array for this UDO,
and returns them in an array
License requirements: None.
- popLinks(UserDefinedObject.LinkType, int) - Method in interface nxopen.userdefinedobjects.UserDefinedObject
-
Removes the links stored at the end of the given link type's link array for this UDO,
and returns them in an array
License requirements: None.
- popStrings(int) - Method in interface nxopen.userdefinedobjects.UserDefinedObject
-
Removes the strings stored at the end of the string array for this UDO,
and returns them in an array
License requirements: None.
- populate(String[]) - Method in interface nxopen.ame.ObjectConnectionDetailBuilder
-
Populate selection
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- populateAnchorPointList() - Method in interface nxopen.features.shipdesign.PillarBuilder
-
Update anchor points
License requirements: None.
- populateAnchorPointList() - Method in interface nxopen.features.shipdesign.PillarSystemBuilder
-
Update anchor points
License requirements: None.
- populateAnchorPointList() - Method in interface nxopen.features.shipdesign.StiffenerStockBuilder
-
Update anchor points
License requirements: None.
- populateAndPrintShipNavigator(BasePart) - Method in interface nxopen.shipdesign.NavigatorCollection
-
Populates and prints data for each navigator found.
- populateAttrList(Tag) - Method in interface nxopen.uf.UFProcessAid
-
- populateAttrList(Tag) - Method in interface nxopen.uf.UFWeld
-
- PopulateAttrListData() - Constructor for class nxopen.uf.UFProcessAid.PopulateAttrListData
-
- PopulateAttrListData() - Constructor for class nxopen.uf.UFWeld.PopulateAttrListData
-
- populateBendListFromView(View) - Method in interface nxopen.features.sheetmetal.BendListBuilder
-
This will populate the bend list from given flat pattern modeling view
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- populateBomListData() - Method in interface nxopen.tooling.BomListBuilder
-
Populates BOM list data according to current template.
- populateList() - Method in interface nxopen.presslinesimulation.HydraulicLifterListBuilder
-
To populate the list of hydraulic lifter builders.
- populateList() - Method in interface nxopen.presslinesimulation.LinearCamListBuilder
-
To populate the list of linear cam builders.
- populateList() - Method in interface nxopen.presslinesimulation.RotaryCamListBuilder
-
To populate the list of rotary cam builders.
- populateList() - Method in interface nxopen.presslinesimulation.UserMotionListBuilder
-
To populate the list of user motion builders.
- populateMDOInfo(NXObject) - Method in interface nxopen.linedesigner.ReuseLibraryUtilityBuilder
-
To populate MDO information
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- PopulateTitleBlockBuilder - Interface in nxopen.diagramming
-
- populateUnselectedDatumsList() - Method in interface nxopen.tooldesigner.SelectDatumsBuilder
-
The builder populate un selected datums list
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- popupDistance() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the distance to move the reference point of the active hood
License requirements: None.
- popupMenuEnabled() - Method in interface nxopen.blockstyler.BodyCollector
-
Returns the PopupMenuEnabled.
- popupMenuEnabled() - Method in interface nxopen.blockstyler.CurveCollector
-
Returns the PopupMenuEnabled
License requirements: None.
- popupMenuEnabled() - Method in interface nxopen.blockstyler.FaceCollector
-
Returns the PopupMenuEnabled
License requirements: None.
- popupPoint() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the reference point of the active hood.
- popVolumes(int) - Method in interface nxopen.userdefinedobjects.UserDefinedObject
-
Removes the volumes stored at the end of the volume array for this UDO,
and returns them in an array
License requirements: None.
- POROSITY - Static variable in class nxopen.cae.Result.Quantity
-
- POROUS - Static variable in class nxopen.PhysicalMaterial.Type
-
Porous material
- PORT - Static variable in class nxopen.ame.CallMethodRuleBuilder.CreationType
-
- port() - Method in interface nxopen.ame.ConnectedObjectsEvaluatorBuilder
-
Returns the expression that will determine the port.
- PORT - Static variable in class nxopen.ame.ExtractAttributeBuilder.Type
-
- PORT - Static variable in class nxopen.ame.OperandRuleBuilder.CreationType
-
- port() - Method in interface nxopen.ame.OperatorRuleBuilder
-
Returns the Object Selection for Global Variable
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- PORT - Static variable in class nxopen.ame.PlcDataType
-
- port() - Method in interface nxopen.ame.PortEvaluatorBuilder
-
Returns the expression that will determine the port.
- Port - Interface in nxopen.diagramming
-
Represents the Port class.
- PORT - Static variable in class nxopen.features.shipdesign.ManufacturingAssemblyNavigatorBuilder.OrientationType
-
Port Orientation
- PORT - Static variable in class nxopen.features.shipdesign.SectionViewBuilder.SymmetricalStructureOptions
-
Only show port side of the bulkhead section view.
- PORT - Static variable in class nxopen.features.shipdesign.ShipCoordinatesBuilder.YDirectionType
-
- PORT - Static variable in class nxopen.features.shipdesign.StandardPartItemBuilder.Direction
-
port
- port() - Method in interface nxopen.mechatronics.TransmitterEntryBuilder
-
Returns the port of the sender.
- port() - Method in interface nxopen.mechatronics.TransmitterExitBuilder
-
Returns the port of the receiver.
- port() - Method in interface nxopen.motion.InputPortAssociation
-
Returns the associated port
License requirements: mechanisms ("MECHANISMS")
.
- port() - Method in interface nxopen.motion.OutputPortAssociation
-
Returns the associated port
License requirements: mechanisms ("MECHANISMS")
.
- port() - Method in interface nxopen.motion.PortVariable
-
Returns the port
License requirements: mechanisms ("MECHANISMS")
.
- Port - Interface in nxopen.pid
-
Represents the port class.
- port() - Method in interface nxopen.routing.InterfaceTerminalBase
-
Returns a physical port representing a prototype
Port
on
a connector piece part or subassembly.
- port() - Method in interface nxopen.routing.LogicalTerminal
-
Returns the physical
Port
associated with the terminal.
- Port - Interface in nxopen.routing
-
Routing Port Object is a parent class for FixturePort, ExtractPort, FittingPort,
Multiport, StockPort and TerminalPort
Creator not available in KF.
- Port.ConnectedPortsData - Class in nxopen.routing
-
- Port.CreateRotationVector - Class in nxopen.routing
-
- Port.FlowDirectionType - Class in nxopen.routing
-
Allowed types for flow direction
- Port.PortType - Class in nxopen.routing
-
Specifies the port type
- port1 - Variable in class nxopen.routing.PortConnection.PortsData
-
first Port connected by the
Port Connection object
- port2 - Variable in class nxopen.routing.PortConnection.PortsData
-
second Port connected by the
Port Connection object
- PORT_POSITION_MISMATCH - Static variable in class nxopen.routing.Run.FlipStatus
-
Ports are not collinear and opposite or perpendicular.
- PORT_TO_IN_CTR - Static variable in class nxopen.features.shipdesign.ThicknessDirectionBuilder.ThicknessDirectionType
-
Direction is Port, To Reference, Inside or Centered.
- portAlias() - Method in interface nxopen.pid.Port
-
Returns the Id of the port.
- portAnnotationHeight() - Method in interface nxopen.ame.SymbolAnnotationSettingsBuilder
-
Returns the port annotation text height
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- portAnnotationTextCFW() - Method in interface nxopen.ame.SymbolAnnotationSettingsBuilder
-
Returns the port annotation text color font width
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- portAnnotationTextOverlined() - Method in interface nxopen.ame.SymbolAnnotationSettingsBuilder
-
Returns whether the symbol annotation text is overlined
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- portAnnotationTextUnderlined() - Method in interface nxopen.ame.SymbolAnnotationSettingsBuilder
-
Returns whether the symbol annotation text is underlined
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- PortArtifact - Interface in nxopen.ame
-
- PortArtifact - Interface in nxopen.pdm
-
- PortAssociation - Interface in nxopen.motion
-
- portAttributeBuilder() - Method in interface nxopen.ame.ExtractAttributeBuilder
-
Returns the port attribute builder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- PortAttributeHolder - Interface in nxopen.ame
-
Port Object Atributes Holder
This does not need a creator.
- portAttributeHolder() - Method in interface nxopen.ame.PortBuilder
-
Returns the port attribute holder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- PortBuilder - Interface in nxopen.ame
-
- PortBuilder - Interface in nxopen.diagramming
-
Represents a PortBuilder.
- PortBuilder.AllowedParentSidesData - Class in nxopen.diagramming
-
- PortBuilder.ConnectableAttrProxyObjectType - Class in nxopen.ame
-
Represents the type of connectable attribute proxy object for typed port
- PortBuilder.CreationModeType - Class in nxopen.ame
-
Represents the type of creation mode
- PortBuilder.Type - Class in nxopen.ame
-
the type of a port
- PortBuilderList - Interface in nxopen.diagramming
-
Represents a list of objects.
- PortCollection - Interface in nxopen.diagramming
-
Represents a collection of Port.
- PortCollection - Interface in nxopen.routing
-
Represents a collection of
Port
objects.
- PortConnection - Interface in nxopen.routing
-
The Routing PortConnection object is used by Routing to position ports
while placing parts.
- PortConnection.OverriddenValidity - Class in nxopen.routing
-
Overridden port connection validity
- PortConnection.PortsData - Class in nxopen.routing
-
- PortConnectionBuilder - Interface in nxopen.ame
-
- PortConnectionCollection - Interface in nxopen.routing
-
- PortConnectionCollection.PortsStatus - Class in nxopen.routing
-
Option to check if two ports can be connected by creating
a
PortConnection
object.
- portConnections() - Method in interface nxopen.routing.RouteManager
-
PortConnection Collection .
- portCreationType() - Method in interface nxopen.ame.OperandRuleBuilder
-
Returns the creation type when creating a position
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- portData() - Method in interface nxopen.diagramminglibraryauthor.Symbol2DBuilder
-
Returns the port data sub-builder.
- PortDataBuilder - Interface in nxopen.diagramminglibraryauthor
-
Represents a PortDataBuilder.
- PortDirectionOption - Class in nxopen.pid
-
Represents the port direction option.
- PortEquipment - Interface in nxopen.pid
-
Represents the PortEquipment class.
- PortEquipmentBuilder - Interface in nxopen.pid
-
Builder used to model a piece of PortEquipment.
- PortEquipmentBuilder.NodeData - Class in nxopen.pid
-
- PortEvaluatorBuilder - Interface in nxopen.ame
-
- portid - Variable in class nxopen.pid.PipeBuilder.StartData
-
- portId() - Method in interface nxopen.pid.PortEquipmentBuilder
-
Returns the current port ID of this port equipment.
- portMappingData() - Method in interface nxopen.diagramminglibraryauthor.Symbol3DBuilder
-
Returns the data provider of the port mapping table.
- portName() - Method in interface nxopen.ame.PortBuilder
-
Returns the name of port
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- PORTRAIT - Static variable in class nxopen.cam.InspectionGraphicalReportOutputBuilder.PageOrientationType
-
- PORTRAIT - Static variable in class nxopen.cam.WorkInstructionOutputBuilder.PageOrientationType
-
- PORTRAIT - Static variable in class nxopen.display.IRayPlusStudioEditorBuilder.IRayPlusStudioStaticImageOrientationType
-
static image orientation where height is greater than width
- PORTRAIT - Static variable in class nxopen.display.RayTracedStudioEditorBuilder.RayTracedStudioStaticImageOrientationType
-
static image orientation where height is greater than width
- PORTRAIT - Static variable in class nxopen.display.StudioImageCaptureBuilder.OrientEnumType
-
Capture image in portrait mode
- PORTRAIT - Static variable in class nxopen.preferences.SessionVisualizationHighQualityImage.OrientationType
-
- PORTRAIT - Static variable in class nxopen.PrintBuilder.OrientationOption
-
Portrait Orientation
- ports() - Method in interface nxopen.diagramming.DiagrammingManager
-
- ports() - Method in interface nxopen.routing.RouteManager
-
Port Collection .
- ports - Variable in class nxopen.uf.UFRoute.AskObjectPortData
-
- ports - Variable in class nxopen.uf.UFRoute.AskPartOccPortsData
-
- ports - Variable in class nxopen.uf.UFRoute.AskRcpPortsData
-
- PortsData() - Constructor for class nxopen.routing.PortConnection.PortsData
-
- PortsData() - Constructor for class nxopen.routing.Stock.PortsData
-
- portSelection() - Method in interface nxopen.motion.ControlOutputBuilder
-
Returns the control output port
License requirements: mechanisms ("MECHANISMS")
.
- portSelection() - Method in interface nxopen.routing.ClockPartBuilder
-
Returns the user selected
Port
for rotation of compoent
License requirements: routing_base ("Routing Basic")
Created in NX7.5.0
- portSelection() - Method in interface nxopen.routing.ModelTerminalsBuilder
-
Returns the port selection
License requirements: routing_harness ("Routing Harness")
.
- portsInformation() - Method in interface nxopen.ame.AmeDebugSession
-
Prints Ports information
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- portsList() - Method in interface nxopen.motion.ControlInputBuilder
-
Returns the list of all child control input ports.
- PortsManagerBuilder - Interface in nxopen.ame
-
Provides journal methods for the ports manager dialog.
- portType() - Method in interface nxopen.ame.PortBuilder
-
Returns the type of port
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- portType - Variable in class nxopen.mechatronics.MATLABClientBuilder.SignalData
-
Data Port Type
- portType - Variable in class nxopen.mechatronics.SignalAdapterBuilder.SignalData
-
Data Port Type
- PortVariable - Interface in nxopen.motion
-
- PortVariableCollection - Interface in nxopen.motion
-
Represents a collection of ports used to expose results on Mechatronics port variables
To obtain an instance of this class, refer to
Mechatronics
Created in NX11.0.0
- PortVariableList - Interface in nxopen.motion
-
Represents a list of objects.
- portVariables() - Method in interface nxopen.motion.Mechatronics
-
- portVariablesList() - Method in interface nxopen.motion.MechatronicsBuilder
-
Returns the watch variables list
License requirements: mechanisms ("MECHANISMS")
.
- pos - Variable in class nxopen.uf.UFFacet.AskSurfaceDataForFaceData
-
- pos - Variable in class nxopen.uf.UFModl.AskSweepDirectionData
-
- pos1 - Variable in class nxopen.uf.UFUi.AskSelRectanglePosData
-
- pos2 - Variable in class nxopen.uf.UFUi.AskSelRectanglePosData
-
- Pos3() - Constructor for class nxopen.uf.UFEvalsf.Pos3
-
- Pos3(double, double[], double[]) - Constructor for class nxopen.uf.UFEvalsf.Pos3
-
- pos3 - Variable in class nxopen.uf.UFUi.AskSelRectanglePosData
-
- pos4 - Variable in class nxopen.uf.UFUi.AskSelRectanglePosData
-
- POSITION - Static variable in class nxopen.annotations.FeatureControlFrameBuilder.FcfCharacteristic
-
position
- POSITION - Static variable in class nxopen.annotations.GeometricCharacteristic
-
Specifies position characteristics
- POSITION - Static variable in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.CharacteristicOptions
-
position
- position - Variable in class nxopen.assemblies.Component.PositionData
-
The origin of this component
- position - Variable in class nxopen.assemblies.DesignElementBuilder.PositionData
-
- position - Variable in class nxopen.cae.Post.Colorbar
-
- position() - Method in interface nxopen.cae.PostLegendPreference
-
Returns the result legend position
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- position() - Method in interface nxopen.cam.FirstPlunge
-
Returns the first plunge position
License requirements: None.
- POSITION - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.TolType
-
Position
- position - Variable in class nxopen.facet.FacetedEdge.CurveData
-
- position - Variable in class nxopen.facet.FacetedFace.SurfaceData
-
- position() - Method in interface nxopen.features.HumanBuilder
-
Returns the human position
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- POSITION - Static variable in class nxopen.features.NSidedSurfaceBuilder.CenterControlType
-
position type
- position() - Method in interface nxopen.features.sheetmetal.MiterOptions
-
Returns the position of miter.
- position() - Method in interface nxopen.features.vehicledesign.DynamicCurbBuilder
-
Returns the dynamic curb position.
- position() - Method in interface nxopen.features.vehicledesign.GroundClearanceBuilder
-
Returns the position of the under axle surface.
- position() - Method in interface nxopen.features.vehicledesign.ManikinBuilder
-
Returns the position of the manikin in the vehicle
License requirements: None.
- position() - Method in interface nxopen.features.vehicledesign.OilPanBuilder
-
Returns the oil pan position.
- position() - Method in interface nxopen.features.vehicledesign.SlopeBuilder
-
Returns the slope position.
- position() - Method in interface nxopen.features.vehicledesign.StaticCurbBuilder
-
Returns the static curb position.
- position() - Method in interface nxopen.features.vehicledesign.WheelCoveringBuilder
-
Returns the wheel covering position.
- position() - Method in interface nxopen.features.vehicledesign.WheelFixingBuilder
-
Returns the wheel fixing position.
- position - Variable in class nxopen.geometricanalysis.GeometricProperties.Edge
-
XYZ Position in Root Part coordinates
- position - Variable in class nxopen.geometricanalysis.GeometricProperties.Face
-
XYZ Position
- POSITION - Static variable in class nxopen.geometricutilities.MatchSurfaceBuilder.MatchConstaint
-
- position - Variable in class nxopen.HumanData.XformData
-
- position - Variable in class nxopen.HumanPosturePredictionBuilder.HandFootCsysData
-
the position of hand or foot
- position() - Method in interface nxopen.linedesigner.CreateFactoryElementBuilder
-
Returns an API that gets position
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- position() - Method in interface nxopen.mechatronics.TransmitterExitBuilder
-
Returns the initial position of receiving objects.
- position - Variable in class nxopen.openxml.ImageDocumentData.CaptionData
-
- position - Variable in class nxopen.openxml.TableDocumentData.CaptionData
-
- position() - Method in interface nxopen.routing.IRoutePosition
-
Returns the current location of the object in ABS coordinates.
- position - Variable in class nxopen.Selection.AskSelectionCursorPositionData
-
- position - Variable in class nxopen.tooling.AddReusableFeatureCollection.InputData
-
Cursor position in create mode
- POSITION - Static variable in class nxopen.tooling.AddReusablePart.PositionMethod
-
- position() - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder
-
Returns the position
License requirements: None.
- position() - Method in interface nxopen.tooling.DieInsertBuilder
-
Returns the die insert position.
- POSITION - Static variable in class nxopen.tooling.FastenerAssy.SelectionTypeMethod
-
Position type
- position() - Method in interface nxopen.tooling.PiercingInsertBuilder
-
Returns the reverse direction
License requirements: None.
- position() - Method in interface nxopen.tooling.PunchInsertBuilder
-
Returns the reverse direction
License requirements: None.
- position - Variable in class nxopen.uf.UFDraw.TabnotParams
-
- position - Variable in class nxopen.uf.UFPath.LinearMotion
-
- position - Variable in class nxopen.uf.UFSo.SplineData
-
- position - Variable in class nxopen.uf.UFStudio.StybldCurveTrans
-
- position - Variable in class nxopen.uf.UFStudio.StybldShapeTrans
-
- position1 - Variable in class nxopen.Selection.AskSelectionRectanglePositionData
-
Absolute coordinates of the button down position
- position2 - Variable in class nxopen.Selection.AskSelectionRectanglePositionData
-
Absolute coordinates of the button up position
- position3 - Variable in class nxopen.Selection.AskSelectionRectanglePositionData
-
Absolute coordinates of corner of screen rectangle
which is horizontal with button down position
- position4 - Variable in class nxopen.Selection.AskSelectionRectanglePositionData
-
Absolute coordinates of corner of screen rectangle
which is horizontal with button up position
- POSITION_AFTER - Static variable in class nxopen.uf.UFNcgroup.Position
-
- POSITION_BEFORE - Static variable in class nxopen.uf.UFNcgroup.Position
-
- POSITION_CONTROL_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
-
The position control of the component
- POSITION_INDEPENDENT - Static variable in class nxopen.features.ExtractFaceBuilder.ParentPartType
-
position independent mode
- POSITION_INFORMATION - Static variable in class nxopen.features.shipdesign.ShipnameFieldBuilderType
-
Field which is generated from mold face plane indicate part location
- POSITION_INFORMATION - Static variable in class nxopen.features.shipdesign.ShipnamesBuilderVersion
-
- POSITION_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
-
The position of the component
- POSITION_TYPE - Static variable in class nxopen.uf.UFGdt.Characteristic
-
- POSITIONAL_ISV - Static variable in class nxopen.sim.SimDebugBuilder.TraceType
-
Trace Positional Isv
- positionalValues() - Method in interface nxopen.cam.BoundaryTurnVariableStock
-
Returns the positional values
License requirements: None.
- positionColor() - Method in interface nxopen.preferences.SessionModeling
-
Returns the position color
License requirements: None.
- PositionControl - Interface in nxopen.mechatronics
-
Represents the Position Control.
- PositionControlBuilder - Interface in nxopen.mechatronics
-
- PositionControlBuilder.AngularPathOptions - Class in nxopen.mechatronics
-
the angular path options.
- PositionControlBuilder.Axis - Class in nxopen.mechatronics
-
the axis types.
- PositionControlCollection - Interface in nxopen.mechatronics
-
Represents a collection of Position Control.
- positionControls() - Method in interface nxopen.mechatronics.PhysicsManager
-
- PositionData() - Constructor for class nxopen.assemblies.Component.PositionData
-
- PositionData() - Constructor for class nxopen.assemblies.DesignElementBuilder.PositionData
-
- positionDefinition() - Method in interface nxopen.features.vehicledesign.BaseDataWheelBuilder
-
Returns the value to indicate which option is used to define the wheel position.
- positioner() - Method in interface nxopen.assemblies.ComponentAssembly
-
Returns the component positioner for this assembly.
- Positioner - Interface in nxopen.positioning
-
An instance of this class can be used to create
Constraint
s and
associated objects.
- positionFromStart() - Method in interface nxopen.cam.BoundaryTurnVariableStockSet
-
Returns the position from start
License requirements: None.
- positioning() - Method in interface nxopen.cam.NcmctPartMountingBuilder
-
Returns the positioning type
License requirements: None.
- positioning() - Method in interface nxopen.mechatronics.PhysicsJointBuilder
-
Returns a boolean value that indicates whether to create an assembly joint.
- PositioningDimension - Interface in nxopen
-
Represents a dimension object attached to the feature
Intances of this object cannot be directly be created.
- PositioningDimension.Subtype - Class in nxopen
-
Represents the subtype of the positioning dimension
- positioningFeatSet() - Method in interface nxopen.tooling.ReusableObjectPasteBuilder
-
Returns the positioning feature set by pattern sketch
License requirements: None.
- positioningFeature() - Method in interface nxopen.tooling.AddReusablePart
-
Returns the positioning feature that needed for reusable component
License requirements: None.
- positioningFeature() - Method in interface nxopen.tooling.FastenerAssy
-
Returns the positioning feature that needed for fastener assembly
License requirements: None.
- PositioningGroup - Interface in nxopen.assemblies
-
Represents the class for positioning group.
- PositioningGroup.Status - Class in nxopen.assemblies
-
Represents the position status of positioning group
- PositioningGroupBuilder - Interface in nxopen.assemblies
-
Represents builder class for positioning group which is used to store constraints for design element.
- positioningGroupDataMembers() - Method in interface nxopen.assemblies.PositioningGroupBuilder
-
Returns the members for positioning group
License requirements: None.
- positioningGroupName() - Method in interface nxopen.assemblies.PositioningGroupBuilder
-
Returns the name of positioning group.
- positioningOptionValue() - Method in interface nxopen.assemblies.DesignElementBuilder
-
Returns the positioning option of a design element
License requirements: None.
- PositioningTask - Interface in nxopen.assemblies
-
Represents the class for positioning task.
- PositioningTaskBuilder - Interface in nxopen.assemblies
-
- positioningTaskCollectionForDesignElements() - Method in interface nxopen.preferences.SessionAssemblies
-
Returns the option to specify where to add Design Elements selected whilst working in the Assembly Constraints Dialog.
- positioningType() - Method in interface nxopen.motion.FlexBodyBuilder
-
Returns the positioning type
License requirements: None.
- positioninmeters - Variable in class nxopen.pdm.DesignElementRevision.TransformData
-
- positionInWcs - Variable in class nxopen.geometricanalysis.GeometricProperties.Edge
-
XYZ Position in Work Part coordinates
- positionInWcs - Variable in class nxopen.geometricanalysis.GeometricProperties.Face
-
XYZ Position in Work Part coordinates
- positionLayoutView(Matrix3x3, Point3d) - Method in interface nxopen.routing.electrical.CablewaysLayoutView
-
Positions the layout view in the 3D space as per input orientation matrix and origin.
- positionLayoutView(Xform) - Method in interface nxopen.routing.electrical.CablewaysLayoutView
-
Positions the layout view in the 3D space as per the
Xform
.
- positionMethod() - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder
-
Returns the position method types to define the close range visibility.
- positionMethod() - Method in interface nxopen.features.vehicledesign.PendulumPlacementBuilder
-
Returns the method to use for positioning this pendulum.
- positionMethod() - Method in interface nxopen.mechatronics.ECADImportBuilder
-
- positionMethod() - Method in interface nxopen.tooling.SIZERImportBuilder
-
Returns the position method, which is used in adding to assembly.
- positionMode() - Method in interface nxopen.tooling.AddReusablePart
-
Returns the current position method
License requirements: None.
- positionObject() - Method in interface nxopen.tooling.MoldFillingBuilder
-
Returns the position object(point or runner body) used to place a gate component.
- positionOnPath() - Method in interface nxopen.features.vehicledesign.CloseRangeDemoCylinderListItemBuilder
-
Returns the percentage value of position on demo cylinder path to define the demo cylinder.
- positionOption() - Method in interface nxopen.cae.xyplot.GraphNameStyle
-
Returns the option specifies how to position the graph name
License requirements: None.
- PositionOverrideType - Class in nxopen.assemblies
-
Represents the type of the positioning override on the component
- positionPath() - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder
-
Returns the position path types to define the close range visibility.
- positionPoint() - Method in interface nxopen.tooling.MoldFillingBuilder
-
Returns the point used to place a runner component.
- positionPrecisionValue() - Method in interface nxopen.features.ToolingBoxBuilder
-
Returns the precision value for the center point of bounded box
License requirements: None.
- positions - Variable in class nxopen.uf.UFModeling.AskFaceMinRadiiData
-
- positions - Variable in class nxopen.uf.UFSim.ConvertNurbsToPositionData
-
- PositionSensor - Interface in nxopen.mechatronics
-
Represents the Position Sensor.
- PositionSensorBuilder - Interface in nxopen.mechatronics
-
- PositionSensorBuilder.AxisJointType - Class in nxopen.mechatronics
-
the Axis Joint types.
- PositionSensorBuilder.OutputMeasureType - Class in nxopen.mechatronics
-
the Measure types.
- PositionSensorCollection - Interface in nxopen.mechatronics
-
Represents a collection of Position Sensor.
- positionSensors() - Method in interface nxopen.mechatronics.PhysicsManager
-
- positionTolerance() - Method in interface nxopen.features.AestheticFaceBlendBuilder
-
Returns the position tolerance
License requirements: None.
- positionTolerance() - Method in interface nxopen.features.NSidedSurfaceBuilder
-
Returns the position tolerance
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- positionTolerance() - Method in interface nxopen.features.RuledBuilder
-
Returns the position tolerance
License requirements: features_modeling ("FEATURES MODELING") OR nx_freeform_1 ("basic freeform modeling")
.
- positionTolerance() - Method in interface nxopen.features.SectionSurfaceBuilder
-
- positionTolerance() - Method in interface nxopen.features.SilhouetteFlangeBuilder
-
Returns the position tolerance
License requirements: None.
- positionTolerance() - Method in interface nxopen.features.StudioSurfaceBuilder
-
Returns the position tolerance
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- positionTolerance() - Method in interface nxopen.features.StudioSurfaceBuilderEx
-
Returns the position tolerance
License requirements: nx_freeform_1 ("basic freeform modeling") OR features_modeling ("FEATURES MODELING")
.
- positionTolerance() - Method in interface nxopen.features.StyledBlendBuilder
-
Returns the position tolerance
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- positionTolerance() - Method in interface nxopen.features.ThroughCurveMeshBuilder
-
Returns the position tolerance.
- positionTolerance() - Method in interface nxopen.features.ThroughCurvesBuilder
-
Returns the position tolerance.
- positionTolerance() - Method in interface nxopen.geometricutilities.ReduceSurfaceRadiusBuilder
-
Returns the position tolerance between two faces connection
License requirements: None.
- positionType - Variable in class nxopen.uf.UFDraw.BreakRegionData
-
- positionValue() - Method in interface nxopen.ame.AccessorEvaluatorBuilder
-
Returns the position value given by the user
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- POSITIVE - Static variable in class nxopen.cae.Post.ClipSide
-
- POSITIVE - Static variable in class nxopen.positioning.ConstraintReference.HalfSpace
-
Measure to the positive side of the surface
- POSITIVE - Static variable in class nxopen.uf.UFModl.FeatureSigns
-
- POSITIVE_MAX - Static variable in class nxopen.cae.AfuMathOperation.TimeToSrsResponseType
-
Positive Maximum
- POSITIVE_NORMAL - Static variable in class nxopen.features.TrimBodyBuilder.DirectionType
-
- POSITIVE_QUADRANT_ALL - Static variable in class nxopen.tooling.HoleReportBuilder.EnumQuadrantType
-
All quadrant is positive
- POSITIVE_QUADRANT_I - Static variable in class nxopen.tooling.HoleReportBuilder.EnumQuadrantType
-
First quadrant is positive
- POSITIVE_QUADRANT_II - Static variable in class nxopen.tooling.HoleReportBuilder.EnumQuadrantType
-
Second quadrant is positive
- POSITIVE_QUADRANT_III - Static variable in class nxopen.tooling.HoleReportBuilder.EnumQuadrantType
-
Third quadrant is positive
- POSITIVE_QUADRANT_IV - Static variable in class nxopen.tooling.HoleReportBuilder.EnumQuadrantType
-
Forth quadrant is positive
- POSITIVE_X - Static variable in class nxopen.die.KeywayBuilder.LocationType
-
+X relative to the center of the coordinate system
- POSITIVE_X - Static variable in class nxopen.die.KeywayChildBuilder.LocationOption
-
Keyway built in positive x direction.
- POSITIVE_X - Static variable in class nxopen.sim.KinematicAxisBuilder.AxisDirectionType
-
positive X-axis
- POSITIVE_Y - Static variable in class nxopen.die.KeywayBuilder.LocationType
-
+Y relative to the center of the coordinate system
- POSITIVE_Y - Static variable in class nxopen.die.KeywayChildBuilder.LocationOption
-
Keyway built in positive y direction.
- POSITIVE_Y - Static variable in class nxopen.sim.KinematicAxisBuilder.AxisDirectionType
-
positive Y-axis
- POSITIVE_Z - Static variable in class nxopen.sim.KinematicAxisBuilder.AxisDirectionType
-
positive Z-axis
- POSITIVE_ZOF_MCS - Static variable in class nxopen.cam.HoleMakingBuilder.ToolAxisTypes
-
Tool axis mode: +Z of MCS
- POSITIVE_ZOF_MCS - Static variable in class nxopen.cam.OrientGeomBuilder.ToolAxisModes
-
Tool axis mode: +Z of MCS
- positiveDirection() - Method in interface nxopen.annotations.OrdinateDimensionPreferences
-
Returns the positive direction
License requirements: None.
- positiveDirection() - Method in interface nxopen.annotations.OrdinateStyleBuilder
-
Returns the positive direction of measurement for an ordinate set
License requirements: None.
- positiveFaceColor() - Method in interface nxopen.cae.modelcheck.ReverseShellElementNormalBuilder
-
Returns the positive face color
License requirements: None.
- positiveFaceColor() - Method in interface nxopen.cae.modelcheck.SolidElementFaceNormalBuilder
-
Returns the positive face color
License requirements: None.
- positiveFlushnessTolerance() - Method in interface nxopen.geometricanalysis.GapFlushnessBuilder
-
Returns the positive tolerance for flushness
License requirements: solid_modeling ("SOLIDS MODELING")
.
- positiveGapTolerance() - Method in interface nxopen.geometricanalysis.GapFlushnessBuilder
-
Returns the positive tolerance for gap
License requirements: solid_modeling ("SOLIDS MODELING")
.
- positiveInnerTolerance() - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder
-
Returns the positive inner tolerance
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- positiveOuterTolerance() - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder
-
Returns the positive outer tolerance
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- positiveX() - Method in interface nxopen.tooling.GeneralInsertBuilder
-
Returns the positive x
License requirements: None.
- positiveY() - Method in interface nxopen.tooling.GeneralInsertBuilder
-
Returns the positive y
License requirements: None.
- positiveZ() - Method in interface nxopen.tooling.GeneralInsertBuilder
-
Returns the positive z
License requirements: None.
- POSSIBLE_CORRUPT_PART - Static variable in class nxopen.uf.UFConstants
-
- POSSIBLE_TOOL_AXIS_PROBLEM - Static variable in class nxopen.cam.CAMObject.Attr
-
- Post - Interface in nxopen.cae
-
Represents Post-Processing
To obtain an instance of this class, refer to
Session
Created in NX5.0.0
- post() - Method in interface nxopen.Session
-
Returns the
Post
belonging to this session
Created in NX3.0.0
- Post.Abcissa - Class in nxopen.cae
-
Abcissa types for graph
- Post.Animation - Class in nxopen.cae
-
Animation settings
- Post.AnimationControl - Class in nxopen.cae
-
Animation controls
- Post.AnimationIterationTypes - Class in nxopen.cae
-
Animation styles
- Post.AnimationParameters - Class in nxopen.cae
-
Animation settings
- Post.AnimationStreamline - Class in nxopen.cae
-
Animation settings for streamline animation
- Post.AnimationStyle - Class in nxopen.cae
-
Animation styles
- Post.AnimationType - Class in nxopen.cae
-
Animation types
- Post.AnnotationBox - Class in nxopen.cae
-
Annotation box display settings
- Post.ASCIIDiffTolerances - Class in nxopen.cae
-
Tolerances used for comparing postview ASCII display files
- Post.AxisymetricAxis - Class in nxopen.cae
-
Axis about which axis symmetric model rotates to create 3D display
- Post.Axisymmetric - Class in nxopen.cae
-
3D Axi-symmetric model display settings
- Post.BandStyle - Class in nxopen.cae
-
Band styles
- Post.Clipping - Class in nxopen.cae
-
Cutting-plane display settings
- Post.ClipPlane - Class in nxopen.cae
-
Cutting plane options
- Post.ClipSide - Class in nxopen.cae
-
Clip hither-yon-cutplaneonly options
- Post.Colorbar - Class in nxopen.cae
-
Colorbar settings
- Post.DisplayColorSchemeType - Class in nxopen.cae
-
Fringe plot display color scheme type
- Post.EdgeFace - Class in nxopen.cae
-
Edge and Face display settings
- Post.EdgeStyle - Class in nxopen.cae
-
Edge display styles
- Post.ElemsVisibilityData - Class in nxopen.cae
-
- Post.Export - Class in nxopen.cae
-
Export types for postview display
- Post.FaceFillStyle - Class in nxopen.cae
-
Face display styles
- Post.FaceStyle - Class in nxopen.cae
-
Face display styles
- Post.Format - Class in nxopen.cae
-
Colorbar format
- Post.GraphIds - Class in nxopen.cae
-
Graph handle
- Post.GraphParameters - Class in nxopen.cae
-
Graph extraction parameters
- Post.GroupVisibility - Class in nxopen.cae
-
Show hide options for user group visibiliy control
- Post.Headerlines - Class in nxopen.cae
-
Headerlines
- Post.IntegrationScheme - Class in nxopen.cae
-
Intergration schemes for streamline extraction
- Post.Legend - Class in nxopen.cae
-
legend display options
- Post.LimitDisplay - Class in nxopen.cae
-
Drawing methods for overflow and under flor values
- Post.LoadTemplateData - Class in nxopen.cae
-
- Post.Mark - Class in nxopen.cae
-
Mark display settings
- Post.MarkColor - Class in nxopen.cae
-
Mark color options
- Post.Marker - Class in nxopen.cae
-
Min-Max marker display options
- Post.MarkHide - Class in nxopen.cae
-
Mark hide options
- Post.MarkLocation - Class in nxopen.cae
-
- Post.MarkMaximumSize - Class in nxopen.cae
-
Maximum mark size options
- Post.MarkRenderStyle - Class in nxopen.cae
-
Mark render styles
- Post.MarkSize - Class in nxopen.cae
-
Mark size options
- Post.MarkTensorStyle - Class in nxopen.cae
-
Mark styles for tensors
- Post.NoDataTreatment - Class in nxopen.cae
-
NoData treatments for extracted data at a graph point
- Post.NodeValueSharingCriterion - Class in nxopen.cae
-
Criteria for value sharing of extracted data at a graph point
- Post.Position - Class in nxopen.cae
-
Colorbar position
- Post.PostviewGetColorbarData - Class in nxopen.cae
-
- Post.PostviewGetFontSizeData - Class in nxopen.cae
-
- Post.PostviewGetFormatData - Class in nxopen.cae
-
- Post.PrimaryEdgeFace - Class in nxopen.cae
-
Edge and Face Fill display settings
- Post.ResultForPostviewData - Class in nxopen.cae
-
- Post.Scale - Class in nxopen.cae
-
Colorbar scales
- Post.ShowHeader - Class in nxopen.cae
-
Show header display options
- Post.Spectrum - Class in nxopen.cae
-
colorbar spectrums
- Post.Streamline - Class in nxopen.cae
-
Streamline display settings
- Post.StreamlineColor - Class in nxopen.cae
-
Streamline color options
- Post.StreamlineData - Class in nxopen.cae
-
Streamline data extraction parameters
- Post.StreamlineDirection - Class in nxopen.cae
-
Direction options for streamline extraction
- Post.StreamlineExtraction - Class in nxopen.cae
-
Streamline extraction parameters
- Post.StreamlineLineWeight - Class in nxopen.cae
-
Streamline line weight options
- Post.StreamlineSeed - Class in nxopen.cae
-
Streamline seed point definition
- Post.StreamlineSize - Class in nxopen.cae
-
Streamline size options
- Post.StreamlineStyle - Class in nxopen.cae
-
Streamline display styles
- Post.StreamlineSynchronization - Class in nxopen.cae
-
Synchronization options for streamlines
- Post.Style - Class in nxopen.cae
-
Fringe styles
- Post.Target - Class in nxopen.cae
-
Target operators
- Post.Text - Class in nxopen.cae
-
Annotation text settings
- Post.Threshold - Class in nxopen.cae
-
colorbar thresholds
- Post.ValueSharingCriterion - Class in nxopen.cae
-
Criteria for value sharing for extracted stream line data
- Post3DGraphBuilder - Interface in nxopen.cae
-
Represents a
Post3DGraphBuilder
This is an abstract class and cannot be instantiated
Created in NX10.0.0
- POST_DEFINED - Static variable in class nxopen.cam.CAMSetup.OutputUnits
-
use post defined unit as output unit
- POST_DEFINED - Static variable in class nxopen.cam.CAMSetup.PostprocessSettingsOutputWarning
-
use post defined setting
- POST_DEFINED - Static variable in class nxopen.cam.CAMSetup.PostprocessSettingsReviewTool
-
use post defined setting
- POST_LEFT_OF_CURVE - Static variable in class nxopen.linedesigner.RailingFeatureBuilder.PostOffsetType
-
- POST_ON_CURVE - Static variable in class nxopen.linedesigner.RailingFeatureBuilder.PostOffsetType
-
- POST_RIGHT_OF_CURVE - Static variable in class nxopen.linedesigner.RailingFeatureBuilder.PostOffsetType
-
- POST_SAVE_AS_PART_REASON - Static variable in class nxopen.uf.UF.CallbackReason
-
- POST_UPDATE - Static variable in class nxopen.features.shipdesign.StandardPartFrameworkBuilder.SmartRuleStage
-
In post-update stage
- POST_VIEW - Static variable in class nxopen.cae.ResultProbe.OutputOption
-
- POSTANG_CIRCULAR - Static variable in class nxopen.cam.ToolpathEventType
-
- POSTANG_LINEAR - Static variable in class nxopen.cam.ToolpathEventType
-
- PostAnnotation - Interface in nxopen.cae
-
Controls appearance of a annoation object in a postview.
- PostAnnotation.Style - Class in nxopen.cae
-
Annotation styles
- PostAnnotation.TextAlignment - Class in nxopen.cae
-
Annotation text alignment
- PostAnnotation.ValueType - Class in nxopen.cae
-
Annotation value type
- PostAnnotationBuilder - Interface in nxopen.cae
-
Builder to create
PostAnnotation
from
Post
User can pass entities which are same as current postview location.
- PostAnnotationBuilder.Type - Class in nxopen.cae
-
select option to define the annotation type
- PostAnnotationPreference - Interface in nxopen.cae
-
Represents Post-Annotation Preferences
To obtain an instance of this class use CAE::CaePost::Preference
.
- postAnnotationPreference() - Method in interface nxopen.cae.PostPreference
-
- postCommitCb(PartOperationImportCallbackData) - Method in interface nxopen.pdm.PartOperationImportObserver.PostCommitCb
-
User defined PostCommit callback that is called after commit of import operation
License requirements: None.
- PostConfiguratorBuilder - Interface in nxopen.sim.postconfigurator
-
This class is used to create a post configurator builder.
- postConfiguratorManager() - Method in interface nxopen.Session
-
- PostConfiguratorManager - Interface in nxopen.sim.postconfigurator
-
- PostControl - Interface in nxopen.motion
-
Represent abstract class Motion.PostControl
This is an abstract class, and cannot be instantiated.
- postcopyoperationCb(SaveAsReviseCallbackData) - Method in interface nxopen.pdm.SaveAsReviseObserver.PostcopyoperationCb
-
User defined postcopyoperation callback that is called after SaveAs and Revise process
License requirements: None.
- postEvent() - Method in interface nxopen.cam.PostEventsCiBuilder
-
Returns the start/end of path toggle
License requirements: None.
- PostEventsCiBuilder - Interface in nxopen.cam
-
Represents a PostEventsCiBuilder .
- postFileBrowser() - Method in interface nxopen.linedesigner.CreateFenceBuilder
-
Returns the post file browser
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- PostGraph - Interface in nxopen.cae
-
This class provides interfaces to query graph attributes
An instance of this class can not be obtained
.
- PostGraphAcrossIterationsBuilder - Interface in nxopen.cae
-
- PostGraphAcrossIterationsBuilder.CombinationMethod - Class in nxopen.cae
-
Defines the methods that can be used to combine multiple values into a single value
- PostGraphAcrossIterationsBuilder.IterationLabelingOption - Class in nxopen.cae
-
Defines the Iteration labeling options
- PostGraphAlongPathBuilder - Interface in nxopen.cae
-
- PostGraphAlongPathBuilder.CoordinateSysAxis - Class in nxopen.cae
-
options for defining the specific coordinate system axis to be used
- PostGraphAlongPathBuilder.CsysType - Class in nxopen.cae
-
csys types
- PostGraphAlongPathBuilder.Xaxis - Class in nxopen.cae
-
select option to define the path as x axis
- PostGraphBuilder - Interface in nxopen.cae
-
Represents a
PostGraphBuilder
This is an abstract class and cannot be instantiated
Created in NX9.0.0
- PostGraphBuilder.DataErrorHandling - Class in nxopen.cae
-
error handling option when result values are not present for the selected entities
- PostGraphBuilder.EdgeIntegralOption - Class in nxopen.cae
-
weighted Average / Integral calculation based on weighted average by on selection of Edge
- PostGraphBuilder.EntityType - Class in nxopen.cae
-
types of the entity objects which are selected
- PostGraphBuilder.EvalutionErrors - Class in nxopen.cae
-
error handling option when there are expression evaluation errors while evaluating the formula
- PostGraphBuilder.FaceIntegralOption - Class in nxopen.cae
-
weighted Average/ Integral calculation based on weighted average by on selection of Face
- PostGraphBuilder.GeometryValue - Class in nxopen.cae
-
This option is used to when the geometric entity selected has multiple
result values.
- PostGraphBuilder.IncompatibleResult - Class in nxopen.cae
-
error handling option when incompactible results are selected
- PostGraphBuilder.NodalCombination - Class in nxopen.cae
-
nodal combination option for determining the nodal result value for element and element-nodal result
- PostGraphOrbitBuilder - Interface in nxopen.cae
-
Represents a
PostGraphOrbitBuilder
This is an abstract class and cannot be instantiated
Created in NX9.0.0
- PostGraphPreference - Interface in nxopen.cae
-
Represents Post-Graph Preferences
To obtain an instance of this class use CAE::CaePost::Preference
.
- postGraphPreference() - Method in interface nxopen.cae.PostPreference
-
- PostIdentifyPreference - Interface in nxopen.cae
-
Represents Post-Identify Preferences
To obtain an instance of this class use CAE::CaePost::Preference
.
- postIdentifyPreference() - Method in interface nxopen.cae.PostPreference
-
- postioningPlane() - Method in interface nxopen.tooling.StandardPartBuilder
-
Returns the postioning plane used to position a standard part.
- PostJtExportBuilder - Interface in nxopen.cae
-
- PostLegendPreference - Interface in nxopen.cae
-
Represents Post-Legend Preferences
To obtain an instance of this class use CAE::CaePost::Preference
.
- postLegendPreference() - Method in interface nxopen.cae.PostPreference
-
- PostMesh - Interface in nxopen.cae
-
This class has the information related to post mesh group.
- postOffset() - Method in interface nxopen.linedesigner.RailingFeatureBuilder
-
Returns the post offset of railing feature
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- postplacementidentifier - Variable in class nxopen.routing.ReuseLibrary.SpecificationsGetGenericPostPlacementsData
-
The list of post placement node identifiers.
- PostPreference - Interface in nxopen.cae
-
Represents Post Preferences
To obtain an instance of this class use CAE::Post
.
- postprocess(CAMObject[], String, String, CAMSetup.OutputUnits) - Method in interface nxopen.cam.CAMSetup
-
Postprocess
License requirements: cam_base ("CAM BASE")
.
- postprocess(CAMObject[], String, String, CAMSetup.OutputUnits) - Method in interface nxopen.cam.InspectionSetup
-
Postprocess
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- postProcess() - Method in interface nxopen.motion.MotionSession
-
Returns the
PostProcess
belonging to this part
Created in NX7.5.0
- PostProcess - Interface in nxopen.motion
-
Represents the motion post process
To obtain an instance of this class, refer to
MotionSession
Created in NX7.5.0
- PostProcess.CreateEnvelopeData - Class in nxopen.motion
-
- PostProcess.EnvelopeAccuracyModes - Class in nxopen.motion
-
The modes for envelope accuracy
- PostProcess.EnvelopeTolerance - Class in nxopen.motion
-
Contains settings for envelope tolerance
- PostProcess.EnvelopeToleranceTypes - Class in nxopen.motion
-
Envelope tolerance types
- PostProcess.UserFunctionBeforeDialogDestroy - Interface in nxopen.motion
-
Post process user function callback before dialog destroy, This callback function will be call when user click the user button.
- PostProcessing - Interface in nxopen.preferences
-
CAE Post Processing preferences
To obtain an instance of this class, refer to
SessionPreferences
Created in NX8.0.1
- postProcessing() - Method in interface nxopen.preferences.SessionPreferences
-
Returns the CAE Post Processing preferences .
- postProcessingSession() - Method in interface nxopen.cae.Post
-
- PostProcessingSession - Interface in nxopen.cae
-
- PostProcessingSessionApplicator - Interface in nxopen.cae
-
- PostprocessorFilenameData() - Constructor for class nxopen.sim.IsvControlPanelBuilder.PostprocessorFilenameData
-
- postprocessorName() - Method in interface nxopen.sim.postconfigurator.CreationPostBuilder
-
Returns the postprocessor's name.
- postprocessorOutputDirectory() - Method in interface nxopen.sim.postconfigurator.CreationPostBuilder
-
Returns the postprocessor's output directory where the postprocessor is created.
- postprocessWithSetting(CAMObject[], String, String, CAMSetup.OutputUnits, CAMSetup.PostprocessSettingsOutputWarning, CAMSetup.PostprocessSettingsReviewTool) - Method in interface nxopen.cam.CAMSetup
-
Postprocess
License requirements: cam_base ("CAM BASE")
.
- postprocessWithSetting(CAMObject[], String, String, CAMSetup.OutputUnits, CAMSetup.PostprocessSettingsOutputWarning, CAMSetup.PostprocessSettingsReviewTool) - Method in interface nxopen.cam.InspectionSetup
-
Postprocess
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- postReports() - Method in interface nxopen.cae.LaminateManager
-
Returns the post report collection belonging to this sim part .
- postresultname - Variable in class nxopen.cae.optimization.TBSOptimizationSolution.JA_CAE_OPT_SOL_get_result
-
- postResultNavigatorPreference() - Method in interface nxopen.cae.PostPreference
-
- PostResultNavigatorPreference - Interface in nxopen.cae
-
Represents Post-ResultNavigator Preferences
To obtain an instance of this class use CAE::CaePost::Preference
.
- postResultPreference() - Method in interface nxopen.cae.PostPreference
-
- PostResultPreference - Interface in nxopen.cae
-
Represents Post-Result Preferences
To obtain an instance of this class use CAE::CaePost::Preference
.
- PostScenario - Interface in nxopen.cae
-
- PostScenarioAvailableDescriptorCollection - Interface in nxopen.cae
-
- PostScenarioBuilder - Interface in nxopen.cae
-
- PostScenarioBuilderDataDefinitionCollection - Interface in nxopen.cae
-
- PostScenarioBuilderSlot - Interface in nxopen.cae
-
- PostScenarioBuilderSlotCollection - Interface in nxopen.cae
-
- PostScenarioConfigurationVariable - Interface in nxopen.cae
-
- PostScenarioConfigurationVariableCollection - Interface in nxopen.cae
-
- PostScenarioDataDefinition - Interface in nxopen.cae
-
- PostScenarioDefinition - Interface in nxopen.cae
-
Represents a data source data definition.
- PostScenarioDescriptor - Interface in nxopen.cae
-
- PostScenarioDescriptorCollection - Interface in nxopen.cae
-
- postScenarioDescriptors() - Method in interface nxopen.cae.PostScenarioManager
-
- PostScenarioInputDefinition - Interface in nxopen.cae
-
- PostScenarioInputDefinitionCollection - Interface in nxopen.cae
-
- PostScenarioManager - Interface in nxopen.cae
-
- PostScenarioMeshDefinition - Interface in nxopen.cae
-
- PostScenarioMeshDefinitionCollection - Interface in nxopen.cae
-
Represents a collection of Mesh Definitions available in a certain Scenario Definition's Input Definition.
- postScenarioMgr() - Method in interface nxopen.cae.CaePart
-
- PostScenarioModeDescription - Class in nxopen.cae
-
Mode description
- PostScenarioModeDescription() - Constructor for class nxopen.cae.PostScenarioModeDescription
-
- PostScenarioModeDescription(int, double) - Constructor for class nxopen.cae.PostScenarioModeDescription
-
Constructor for the PostScenarioModeDescription object.
- PostScenarioParameters - Interface in nxopen.cae
-
- PostScenarioSelectionParameters - Interface in nxopen.cae
-
The class handles the User Selection for a Scenario.
- PostScenarioVariable - Interface in nxopen.cae
-
A selection variable to which values can be bound in order to define a user selection for a post scenario.
- PostScenarioVariableCollection - Interface in nxopen.cae
-
- PostScenarioVariant - Interface in nxopen.cae
-
A dynamically typed scalar value.
- PostScenarioVariantComponent - Class in nxopen.cae
-
Components of vectors or tensors.
- PostScenarioVariantType - Class in nxopen.cae
-
The data type of a CAE.PostScenarioVariant Value
- PostScenarioVisualizationCollection - Interface in nxopen.cae
-
Represents a collection of Visualizations available in a certain Scenario Definition's Input Definition.
- PostScenarioVisualizationDefinition - Interface in nxopen.cae
-
- PostSelectionEntity - Interface in nxopen.cae
-
This class has the information related to post selection entity.
- PostShowhideBuilder - Interface in nxopen.cae
-
- PostShowhideBuilder.Vis - Class in nxopen.cae
-
option to show/hide the selected entities
- postToolPathExit() - Method in interface nxopen.cam.OperationBuilder
-
Returns the environment variable that points to the post tool path generation library which has the exit
License requirements: cam_base ("CAM BASE")
.
- PostToolsControl - Interface in nxopen.motion
-
Represent abstract class Motion.PostToolsControl
An instance of this class can not be obtained
Created in NX11.0.0
- postType() - Method in interface nxopen.routing.HandrailBuilder
-
Returns the type of post: Start, Intermediate, None, End
License requirements: routing_platform ("Routing Platform")
.
- postUpdate() - Method in interface nxopen.features.shipdesign.StandardPartFrameworkBuilder
-
Does the final check to finish the process of updating standar parts.
- postUpdateCallback(CustomFeaturePostUpdateEvent) - Method in interface nxopen.features.CustomFeatureClass.PostUpdateCallback
-
Prototype for post update callbacks
License requirements: solid_modeling ("SOLIDS MODELING")
.
- postviewAnimationControl(int, Post.AnimationControl, int, boolean, int) - Method in interface nxopen.cae.Post
-
Control animation for the input postview id
The input postview id is what was returned from CreatePostview or CreatePostviewForResult
This interface works only in interactive mode.
- postviewAnimationControlStreamline(int, Post.AnimationStreamline) - Method in interface nxopen.cae.Post
-
Control streamline animation for the input postview id
The input postview id is what was returned from CreatePostview or CreatePostviewForResult.
- postviewAnimationPlay(int, Post.Animation) - Method in interface nxopen.cae.Post
-
- postviewAnimationPlay(int, Post.AnimationParameters) - Method in interface nxopen.cae.Post
-
Play or Replay the animation for the input postview id with the input animation parameters.
- postviewApplyAllSEVis(int, boolean) - Method in interface nxopen.cae.Post
-
Set visibility of all super elements in the postview
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- postviewApplyCsysContainerVisibility(int, boolean) - Method in interface nxopen.cae.Post
-
Set the visibility of a coordinate system container in the input postview id with immediate effect.
- postviewApplyCsysVisibility(int, int, boolean) - Method in interface nxopen.cae.Post
-
Set the visibility of a coordinate system (id) in
the input postview id with immediate effect.
- postviewApplyGroupContainerVisibility(int, Result.GroupContainer, boolean) - Method in interface nxopen.cae.Post
-
Set the visibility of an element group container in the input postview id with immediate effect.
- postviewApplyGroupContainerVisibility(int, Result, Result.GroupContainer, boolean) - Method in interface nxopen.cae.Post
-
Set the visibility of an element group container in the input postview id with immediate effect.
- postviewApplyGroupContainerVisibility(int, Result.GroupContainer[], boolean) - Method in interface nxopen.cae.Post
-
Set the visibility of an element group container(s) in the input postview id with immediate effect.
- postviewApplyGroupContainerVisibility(int, Result, Result.GroupContainer[], boolean) - Method in interface nxopen.cae.Post
-
Set the visibility of an element group container(s) in the input postview id with immediate effect.
- postviewApplyGroupVisibility(int, Result.GroupContainer, int, boolean) - Method in interface nxopen.cae.Post
-
Set the visibility of an element group (index) within a container (1D, 2D, Connector etc) in
the input postview id with immediate effect.
- postviewApplyGroupVisibility(int, int, Result.GroupContainer, int, boolean) - Method in interface nxopen.cae.Post
-
Set the visibility of an element group (index) within a container (1D, 2D, Connector etc) in
the input postview id with immediate effect.
- postviewApplyGroupVisibility(int, Result.GroupContainer[], int[], boolean) - Method in interface nxopen.cae.Post
-
Set the visibility of an element group(s) (index) within a container (1D, 2D, Connector etc) in
the input postview id with immediate effect.
- postviewApplyGroupVisibility(int, int, Result.GroupContainer[], int[], boolean) - Method in interface nxopen.cae.Post
-
Set the visibility of an element group(s) (index) within a container (1D, 2D, Connector etc) in
the input postview id with immediate effect.
- postviewApplySERepresentation(int, int, Result.SuperElementRep) - Method in interface nxopen.cae.Post
-
Set the representation of the super element in postivew.
- postviewApplySERepresentation(int, int[], Result.SuperElementRep) - Method in interface nxopen.cae.Post
-
Set the representation of the multiple super elements in postivew.
- postviewApplySEVisibility(int, int, boolean) - Method in interface nxopen.cae.Post
-
Set the visibility of a super element of the current representation in the input postview id with immediate effect.
- postviewApplyShowAll(int) - Method in interface nxopen.cae.Post
-
Perform a Show All on the input postview id.
- postviewApplyTemplate(int, int) - Method in interface nxopen.cae.Post
-
Apply a loaded template on the input postview id.
- postviewApplyTemplateFile(int, String) - Method in interface nxopen.cae.Post
-
Apply a template file on the input postview id.
- postviewApplyUserGroupVisibility(int, int[], Post.GroupVisibility) - Method in interface nxopen.cae.Post
-
Control visibility of one or more usergroups with immediate effect.
- postviewApplyUserGroupVisibility(int, Result, int[], Post.GroupVisibility) - Method in interface nxopen.cae.Post
-
Control visibility of one or more usergroups with immediate effect.
- postviewApplyUserGroupVisibility(int, Result[], int[], Post.GroupVisibility) - Method in interface nxopen.cae.Post
-
Control visibility of one or more usergroups with immediate effect.
- postviewAskSERepresentations(int, int) - Method in interface nxopen.cae.Post
-
Gets all the representations of a super element in postivew.
- postviewCaptureAnimatedGif(int, String, boolean, boolean) - Method in interface nxopen.cae.Post
-
Capture an animated gif image for an input postview id is that is already animating.
- postviewCreateClone(int, int) - Method in interface nxopen.cae.Post
-
Creates a clone of a given postview.
- postviewDelete(int) - Method in interface nxopen.cae.Post
-
Delete a postview
The input postview id is what was returned from CreatePostview, CreatePostviewForResult, or CreateCrossSectionViewForResult
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- postviewExportDisplay(int, String, Post.Export, boolean, boolean) - Method in interface nxopen.cae.Post
-
Export the display of the input postview id to the specified format.
- postviewExportTemplate(int, String) - Method in interface nxopen.cae.Post
-
Save all the setting of the input postview id to a template xml file. no image capture.
- postviewGetColorbar(int) - Method in interface nxopen.cae.Post
-
Get colorbar options in the input postview id.
- PostviewGetColorbarData() - Constructor for class nxopen.cae.Post.PostviewGetColorbarData
-
- postviewGetFontSize(int) - Method in interface nxopen.cae.Post
-
Set font size options in the input postview id.
- PostviewGetFontSizeData() - Constructor for class nxopen.cae.Post.PostviewGetFontSizeData
-
- postviewGetFormat(int) - Method in interface nxopen.cae.Post
-
Get text formating used for legend in the input postview id.
- PostviewGetFormatData() - Constructor for class nxopen.cae.Post.PostviewGetFormatData
-
- postviewGetShowHeader(int) - Method in interface nxopen.cae.Post
-
Get show header option in the input postview id.
- postviewGetText(int) - Method in interface nxopen.cae.Post
-
Get text color used for legend in the input postview id.Needs a PostviewUpdate call to take effect.
- postviewGetUserGroupGids(int, String[]) - Method in interface nxopen.cae.Post
-
Returns the list of gids as per the group names provided.
- postviewMarkerOnOff(int, boolean) - Method in interface nxopen.cae.Post
-
Set the min-max markers on-off for the input postview id.
- postviewRename(int, String) - Method in interface nxopen.cae.Post
-
Rename a postview.
- postviewSaveTemplate(int) - Method in interface nxopen.cae.Post
-
Save all the setting of the input postview id to a template xml file, capture image,
and load template for future use.
- postviewSetAnnotationBox(int, Post.AnnotationBox) - Method in interface nxopen.cae.Post
-
- postviewSetAxisymmetric(int, Post.Axisymmetric) - Method in interface nxopen.cae.Post
-
Set cutting-plane options in the input postview id.
- postviewSetBandStyle(int, Post.BandStyle) - Method in interface nxopen.cae.Post
-
Set the band style in the input postview id.
- postviewSetClipping(int, Post.Clipping) - Method in interface nxopen.cae.Post
-
- postviewSetClipping(int, ClippingParameters) - Method in interface nxopen.cae.Post
-
Set cutting-plane options in the input postview id.
- postviewSetColorbar(int, Post.Colorbar) - Method in interface nxopen.cae.Post
-
Set colorbar options in the input postview id.
- postviewSetColorbar(int, Post.Colorbar, boolean, double[], NXColor.Rgb[]) - Method in interface nxopen.cae.Post
-
Set color bar options along with custom overwrite options in the input postview id.
- postviewSetColorDisplayDeformationSynchronization(int, boolean) - Method in interface nxopen.cae.Post
-
Set synchronization of the color and deformed display in the input postview id.
- postViewSetColorScheme(int, Post.DisplayColorSchemeType) - Method in interface nxopen.cae.Post
-
Set the color scheme in the input postview id.
- postviewSetCompression(int, boolean, double, double) - Method in interface nxopen.cae.Post
-
Set compression option in the input postview id.
- postviewSetCriticalLayerIdDisplay(int, boolean) - Method in interface nxopen.cae.Post
-
Activate or deactivate the laminate layer ply id label display for a given post view.
- postviewSetCriticalLoadIdDisplay(int, boolean) - Method in interface nxopen.cae.Post
-
Activate or deactivate the laminate critical loadcase id label display for a given post view.
- postviewSetCriticalPlyIdDisplay(int, boolean) - Method in interface nxopen.cae.Post
-
Activate or deactivate the laminate critical ply id label display for a given post view.
- postviewSetCurrentInOverlay(int) - Method in interface nxopen.cae.Post
-
Set the input postview id as the current postview if it is one of several overlaid postviews
The input postview id is what was returned from CreatePostview or CreatePostviewForResult
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- postviewSetDeformation(int, Result.DeformationParameters) - Method in interface nxopen.cae.Post
-
- postviewSetDeformation(int, DeformationParameters) - Method in interface nxopen.cae.Post
-
Set the result for deformed shape in the input postview id.
- postviewSetDeformed(int, boolean) - Method in interface nxopen.cae.Post
-
Set the primary display to be deformed/undeformed in the input postview id.
- postviewSetDeformedUndeformedSynchronization(int, boolean, boolean, boolean) - Method in interface nxopen.cae.Post
-
Set the primary display to be deformed/undeformed in the input postview id.
- postviewSetEdgeFace(int, Post.EdgeFace, Post.EdgeFace) - Method in interface nxopen.cae.Post
-
- postviewSetEdgeFace(int, Post.EdgeFace) - Method in interface nxopen.cae.Post
-
- postviewSetEdgeFace(int, Post.PrimaryEdgeFace, Post.EdgeFace) - Method in interface nxopen.cae.Post
-
Set edge and face styles and colors for both primary and undeformed displays in the input
postview id.
- postviewSetEdgeFace(int, Post.PrimaryEdgeFace) - Method in interface nxopen.cae.Post
-
Set edge and face styles and colors for primary display in the input
postview id.
- postviewSetFontSize(int, boolean, double) - Method in interface nxopen.cae.Post
-
Set font size options in the input postview id.
- postviewSetFormat(int, Post.Format, int) - Method in interface nxopen.cae.Post
-
Set text formating used for legend and identify in the input postview id.
- postviewSetGlobalTranslucency(int, boolean) - Method in interface nxopen.cae.Post
-
Make all entities in postview transparent
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- postviewSetGroupContainerVisibility(int, Result.GroupContainer, boolean) - Method in interface nxopen.cae.Post
-
Set the visibility of an element group container in the input postview id.
- postviewSetGroupVisibility(int, Result.GroupContainer, int, boolean) - Method in interface nxopen.cae.Post
-
Set the visibility of an element group (index) within a container (1D, 2D, Connector etc) in
the input postview id.
- postviewSetHeaderlines(int, Post.Headerlines[]) - Method in interface nxopen.cae.Post
-
Set headerlines in the input postview id.
- postviewSetLegend(int, boolean, Post.Legend) - Method in interface nxopen.cae.Post
-
- postviewSetLighting(int, boolean) - Method in interface nxopen.cae.Post
-
Set lighted option in the input postview id.
- postviewSetMark(int, Post.Mark) - Method in interface nxopen.cae.Post
-
Set the mark display options in the input postview id.
- postviewSetMarker(int, boolean, Post.Marker) - Method in interface nxopen.cae.Post
-
- postviewSetMeshTransparency(int, PostMesh[], boolean) - Method in interface nxopen.cae.Post
-
Make a mesh transparent
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- postviewSetPosition(int, Post.Position) - Method in interface nxopen.cae.Post
-
- postviewSetResult(int, Result.ResultParameters) - Method in interface nxopen.cae.Post
-
- postviewSetResult(int, ResultParameters) - Method in interface nxopen.cae.Post
-
Set the result for color display in the input postview id.
- postviewSetResultWithNodalForceReport(int, ResultParametersWithNodalForceReport) - Method in interface nxopen.cae.Post
-
- postviewSetResultWithProbe(int, ResultParametersWithProbe) - Method in interface nxopen.cae.Post
-
- postviewSetShowHeader(int, Post.ShowHeader) - Method in interface nxopen.cae.Post
-
Set show header option in the input postview id.
- postviewSetStreamline(int, Post.Streamline) - Method in interface nxopen.cae.Post
-
Set the streamline display options in the input postview id.
- postviewSetStreamlineSeedSet(int, int) - Method in interface nxopen.cae.Post
-
Set the seed set to use for streamline extraction in the input postview id.
- postviewSetStreamlineVelocity(int, Result.VelocityParameters) - Method in interface nxopen.cae.Post
-
- postviewSetStreamlineVelocity(int, BaseResultType) - Method in interface nxopen.cae.Post
-
Set the velocity field for streamline extraction in the input postview id.
- postviewSetStyle(int, int, Post.Style) - Method in interface nxopen.cae.Post
-
Set the fringe style in the input postview id.
- postviewSetTarget(int, Post.Target) - Method in interface nxopen.cae.Post
-
Set the target operator in the input postview id.
- postviewSetText(int, Post.Text) - Method in interface nxopen.cae.Post
-
Set text color used for legend and identify in the input postview id.
- postviewSetUndeformed(int, boolean) - Method in interface nxopen.cae.Post
-
Set the undeformed display in the input postview id.
- postviewUpdate(int) - Method in interface nxopen.cae.Post
-
Make the input postview id up-to-date with all the settings made via PostviewSet* methods so far.
- POUND_FOOT - Static variable in class nxopen.MeasureBodies.AnalysisUnit
-
- POUND_INCH - Static variable in class nxopen.MeasureBodies.AnalysisUnit
-
- POUND_SIGN - Static variable in class nxopen.fields.DisplayPropertiesBuilder.IndepDomDispType
-
- POUND_SIGN - Static variable in class nxopen.fields.DisplayPropertiesBuilder.ValuesEnum
-
- POUNDAL_FOOT - Static variable in class nxopen.cae.DurSpecialistDataSources.UnitSystem
-
poundal ft lbm
- POUNDS_FEET - Static variable in class nxopen.uf.UFModl.DensityUnits
-
- POUNDS_INCHES - Static variable in class nxopen.uf.UFModl.DensityUnits
-
- POUNDS_PER_CUBIC_FEET - Static variable in class nxopen.geometricanalysis.SolidDensity.UnitsType
-
lbm/ft^3
- POUNDS_PER_CUBIC_INCHES - Static variable in class nxopen.geometricanalysis.SolidDensity.UnitsType
-
lbm/in^3
- POUNDSIGN - Static variable in class nxopen.cae.MarkerType0d
-
- POUNDSIGN - Static variable in class nxopen.cae.ModelDisplayBuilder.FreeEdgeMarker
-
Pound sign marker
- POUNDSIGN - Static variable in class nxopen.cae.ModelDisplayBuilder.StitchedEdgeMarker
-
Pound sign marker
- POUNDSIGN - Static variable in class nxopen.cae.xyplot.PointMarker
-
Pound sign marker
- POUNDSIGN - Static variable in class nxopen.uf.UFDisp.PolyMarker
-
- POUNDSIGN - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- POWDER_GRAY_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- POWELL - Static variable in class nxopen.optimization.OptimizationBuilder.OptimizationAlgorithmType
-
Powell
- POWER - Static variable in class nxopen.cae.Result.Quantity
-
- POWER - Static variable in class nxopen.cae.XyFunctionMeasure
-
Power
- power(double, double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the power.
- POWER_BTUPH - Static variable in class nxopen.cae.XyFunctionUnit
-
Power Unit: BTUperhour
- POWER_BTUPM - Static variable in class nxopen.cae.XyFunctionUnit
-
Power Unit: BTUperminute
- POWER_BTUPS - Static variable in class nxopen.cae.XyFunctionUnit
-
Power Unit: BTUpersecond
- POWER_DENSITY - Static variable in class nxopen.cae.Result.Quantity
-
- POWER_HARDENING - Static variable in class nxopen.cae.DurabilityDamageEvaluationBuilder.CyclicStressStrainModelEnum
-
- POWER_HARDENING - Static variable in class nxopen.cae.DurabilityEventFatigueSettingsBuilder.CyclicStressStrainModelEnum
-
PowerHardening
- POWER_KW - Static variable in class nxopen.cae.XyFunctionUnit
-
Power Unit: KiloWatt
- POWER_LBFINPS - Static variable in class nxopen.cae.XyFunctionUnit
-
Power Unit: lbf-in/s
- POWER_LBMFT2SP3 - Static variable in class nxopen.cae.XyFunctionUnit
-
Power Unit: lbm-ft/s3
- POWER_MUW - Static variable in class nxopen.cae.XyFunctionUnit
-
Power Unit: microWatt
- POWER_MW - Static variable in class nxopen.cae.XyFunctionUnit
-
Power Unit: milliWatt
- POWER_SPECTRAL_DENSITY - Static variable in class nxopen.cae.XyFunctionDataType
-
Function is Power Spectral Density
- POWER_SPECTRAL_DENSITY - Static variable in class nxopen.cae.XyFunctionGeneralType
-
Function is Power Spectral Density
- POWER_SPECTRAL_DENSITY - Static variable in class nxopen.cae.XyFunctionLoadType
-
Function is Power Spectral Density
- POWER_SPECTRAL_DENSITY - Static variable in class nxopen.cae.XyFunctionResponseType
-
Function is Power Spectral Density
- POWER_SPECTRAL_DENSITY_PRESSURE - Static variable in class nxopen.cae.Result.Quantity
-
- POWER_SUPPLY_DIAGRAM - Static variable in class nxopen.ame.DocumentType
-
- POWER_SUPPLY_TOPOLOGY - Static variable in class nxopen.ame.PageBuilder.Types
-
- POWER_SUPPLY_TOPOLOGY_DIAGRAM - Static variable in class nxopen.ame.Manage2dSymbolsBuilder.SymbolRepresentationTypes
-
- POWER_W - Static variable in class nxopen.cae.XyFunctionUnit
-
Power Unit: Watt
- POWERDYN_MODOPT - Static variable in class nxopen.uf.UFConstants
-
- powerInput() - Method in interface nxopen.ame.EplanSettingsBuilder
-
Returns the power input
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- POWERLINE - Static variable in class nxopen.sim.MachineToolConfiguration.ControllerLines
-
The powerline controller line
- ppropindices - Variable in class nxopen.cae.SimBcPlotContoursBuilder.AvailablePropertyNamesAndIndicesToPlotData
-
- ppropnames - Variable in class nxopen.cae.SimBcPlotContoursBuilder.AvailablePropertyNamesAndIndicesToPlotData
-
- ppstrparamdescription - Variable in class nxopen.features.shipdesign.StandardPartFrameworkBuilder.RunSmartRuleData
-
- ppstrparamname - Variable in class nxopen.features.shipdesign.StandardPartFrameworkBuilder.CheckSpreadsheetInputData
-
- ppstrparamname - Variable in class nxopen.features.shipdesign.StandardPartFrameworkBuilder.RunSmartRuleData
-
- ppstrparamvalue - Variable in class nxopen.features.shipdesign.StandardPartFrameworkBuilder.CheckSpreadsheetInputData
-
- ppstrparamvalue - Variable in class nxopen.features.shipdesign.StandardPartFrameworkBuilder.RunSmartRuleData
-
- pptMergeOption() - Method in interface nxopen.cae.SolverAppendOption
-
Returns the physical property merge choice
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- pptSeed - Variable in class nxopen.cae.CaeGroupCollection.AutoGroupSeedNames
-
prefix seed name for auto groups grouped by physical property table
- PQR - Static variable in class nxopen.motion.MechanismExport.PositionOrientationFormat
-
P, Q, R points
- PRC16K - Static variable in class nxopen.PrintBuilder.PaperSize
-
PRC 16K, 146- by 215-millimeters: Windows 98/Me, Windows NT 4.0 and later
- PRC16K_ROTATED - Static variable in class nxopen.PrintBuilder.PaperSize
-
PRC 16K Rotated, 215- by 146-millimeters: Windows 98/Me, Windows NT 4.0 and later
- PRC32K - Static variable in class nxopen.PrintBuilder.PaperSize
-
PRC 32K, 97- by 151-millimeters: Windows 98/Me, Windows NT 4.0 and later
- PRC32K_BIG - Static variable in class nxopen.PrintBuilder.PaperSize
-
PRC 32K(Big) 97- by 151-millimeters: Windows 98/Me, Windows NT 4.0 and later
- PRC32K_BIG_ROTATED - Static variable in class nxopen.PrintBuilder.PaperSize
-
PRC 32K(Big) Rotated, 151- by 97-millimeters: Windows 98/Me, Windows NT 4.0 and later
- PRC32K_ROTATED - Static variable in class nxopen.PrintBuilder.PaperSize
-
PRC 32K Rotated, 151- by 97-millimeters: Windows 98/Me, Windows NT 4.0 and later
- PRC_ENVELOPE1 - Static variable in class nxopen.PrintBuilder.PaperSize
-
PRC Envelope #1, 102- by 165-millimeters: Windows 98/Me, Windows NT 4.0 and later
- PRC_ENVELOPE10 - Static variable in class nxopen.PrintBuilder.PaperSize
-
PRC Envelope #10, 324- by 458-millimeters: Windows 98/Me, Windows NT 4.0 and later
- PRC_ENVELOPE10ROTATED - Static variable in class nxopen.PrintBuilder.PaperSize
-
PRC Envelope #10 Rotated, 458- by 324-millimeters: Windows 98/Me, Windows NT 4.0 and later
- PRC_ENVELOPE1ROTATED - Static variable in class nxopen.PrintBuilder.PaperSize
-
PRC Envelope #1 Rotated, 165- by 102-millimeters: Windows 98/Me, Windows NT 4.0 and later
- PRC_ENVELOPE2 - Static variable in class nxopen.PrintBuilder.PaperSize
-
PRC Envelope #2, 102- by 176-millimeters: Windows 98/Me, Windows NT 4.0 and later
- PRC_ENVELOPE2ROTATED - Static variable in class nxopen.PrintBuilder.PaperSize
-
PRC Envelope #2 Rotated, 176- by 102-millimeters: Windows 98/Me, Windows NT 4.0 and later
- PRC_ENVELOPE3 - Static variable in class nxopen.PrintBuilder.PaperSize
-
PRC Envelope #3, 125- by 176-millimeters: Windows 98/Me, Windows NT 4.0 and later
- PRC_ENVELOPE3ROTATED - Static variable in class nxopen.PrintBuilder.PaperSize
-
PRC Envelope #3 Rotated, 176- by 125-millimeters: Windows 98/Me, Windows NT 4.0 and later
- PRC_ENVELOPE4 - Static variable in class nxopen.PrintBuilder.PaperSize
-
PRC Envelope #4, 110- by 208-millimeters: Windows 98/Me, Windows NT 4.0 and later
- PRC_ENVELOPE4ROTATED - Static variable in class nxopen.PrintBuilder.PaperSize
-
PRC Envelope #4 Rotated, 208- by 110-millimeters: Windows 98/Me, Windows NT 4.0 and later
- PRC_ENVELOPE5 - Static variable in class nxopen.PrintBuilder.PaperSize
-
PRC Envelope #5, 110- by 220-millimeters: Windows 98/Me, Windows NT 4.0 and later
- PRC_ENVELOPE5ROTATED - Static variable in class nxopen.PrintBuilder.PaperSize
-
PRC Envelope #5 Rotated, 220- by 110-millimeters: Windows 98/Me, Windows NT 4.0 and later
- PRC_ENVELOPE6 - Static variable in class nxopen.PrintBuilder.PaperSize
-
PRC Envelope #6, 120- by 230-millimeters: Windows 98/Me, Windows NT 4.0 and later
- PRC_ENVELOPE6ROTATED - Static variable in class nxopen.PrintBuilder.PaperSize
-
PRC Envelope #6 Rotated, 230- by 120-millimeters: Windows 98/Me, Windows NT 4.0 and later
- PRC_ENVELOPE7 - Static variable in class nxopen.PrintBuilder.PaperSize
-
PRC Envelope #7, 160- by 230-millimeters: Windows 98/Me, Windows NT 4.0 and later
- PRC_ENVELOPE7ROTATED - Static variable in class nxopen.PrintBuilder.PaperSize
-
PRC Envelope #7 Rotated, 230- by 160-millimeters: Windows 98/Me, Windows NT 4.0 and later
- PRC_ENVELOPE8 - Static variable in class nxopen.PrintBuilder.PaperSize
-
PRC Envelope #8, 120- by 309-millimeters: Windows 98/Me, Windows NT 4.0 and later
- PRC_ENVELOPE8ROTATED - Static variable in class nxopen.PrintBuilder.PaperSize
-
PRC Envelope #8 Rotated, 309- by 120-millimeters: Windows 98/Me, Windows NT 4.0 and later
- PRC_ENVELOPE9 - Static variable in class nxopen.PrintBuilder.PaperSize
-
PRC Envelope #9, 229- by 324-millimeters: Windows 98/Me, Windows NT 4.0 and later
- PRC_ENVELOPE9ROTATED - Static variable in class nxopen.PrintBuilder.PaperSize
-
PRC Envelope #9 Rotated, 324- by 229-millimeters: Windows 98/Me, Windows NT 4.0 and later
- PRE_ASPECT - Static variable in class nxopen.HumanPosturePredictionBuilder.PredictionMethodType
-
Indicate Pre-ASPECT H_point method
- PRE_DEFINITION - Static variable in class nxopen.ame.MultiValueObjectsPort.JaAmeValueObjectUsageType
-
- PRE_NX4 - Static variable in class nxopen.preferences.SessionPdm.UnpopulatedBehaviourType
-
- PRE_NX85EXACT - Static variable in class nxopen.drawings.ViewCreationWizardBuilder.ViewRepresentations
-
View representation mode legacy Exact
- PRE_NX85EXACT - Static variable in class nxopen.preferences.GeneralViewRepresentationOption
-
Pre-NX 8.5 Exact
- PRE_UPDATE - Static variable in class nxopen.features.shipdesign.StandardPartFrameworkBuilder.SmartRuleStage
-
In pre-update stage
- preassemblePartocc(Tag, Tag) - Method in interface nxopen.uf.UFAssem
-
- preAutoassignCb(PartOperationImportCallbackData) - Method in interface nxopen.pdm.PartOperationImportObserver.PreAutoassignCb
-
User defined PreAutoAssign callback that is called before auto-assigning attributes
License requirements: None.
- Prebend - Interface in nxopen.features
-
Represents a Prebend feature
To create or edit an instance of this class, use
PrebendBuilder
Created in NX10.0.0
- PREBEND - Static variable in class nxopen.tooling.BendOperationBuilder.Types
-
prebend operation
- PREBEND - Static variable in class nxopen.tooling.DirectUnbendBuilder.Bendtypes
-
prebend operation
- PrebendBuilder - Interface in nxopen.tooling
-
- PrebendBuilder.NumberBendsOption - Class in nxopen.tooling
-
The option of bend number to divide into
- PRECEDENCE_NONE - Static variable in class nxopen.uf.UFGdt.Precedence
-
- PRECEDENCE_PRIMARY - Static variable in class nxopen.uf.UFGdt.Precedence
-
- PRECEDENCE_SECONDARY - Static variable in class nxopen.uf.UFGdt.Precedence
-
- PRECEDENCE_TERTIARY - Static variable in class nxopen.uf.UFGdt.Precedence
-
- PRECISE_CONTACT - Static variable in class nxopen.uf.UFMotion.ContactMethod
-
- PRECISE_SOLID - Static variable in class nxopen.motion.PackagingInterferenceBuilder.Mode
-
Interference calculated by Precise Solid method.
- preciseGeom() - Method in interface nxopen.JtCreator
-
Returns the preciseGeom * - Specifies whether precise model geometry should be Enabled or Disabled in translated
License requirements: None.
- precision() - Method in interface nxopen.annotations.TableCellStyleBuilder
-
Returns the precision
License requirements: None.
- precision - Variable in class nxopen.uf.UFPlist.FieldFormat
-
- precision - Variable in class nxopen.uf.UFTabnot.CellPrefs
-
- precisionType() - Method in interface nxopen.die.PierceTaskBuilder
-
Returns the precision type of the pierce task
License requirements: die_engineering ("DIE ENGINEERING")
.
- precisionValue() - Method in interface nxopen.features.ToolingBoxBuilder
-
Returns the precision value for the size of bounded box
License requirements: None.
- precisionValue() - Method in interface nxopen.tooling.EjectorPostProcessingBuilder
-
Returns the precision of the fit distance value.
- preCommit() - Method in interface nxopen.mechanicalrouting.AssignCornerBuilder
-
Performs the operations needed prior to a commit.
- preCommit() - Method in interface nxopen.mechanicalrouting.CreatePathBuilder
-
Performs the operations needed prior to a commit.
- preCommit() - Method in interface nxopen.mechanicalrouting.InsulationBuilder
-
Performs the operations needed prior to a commit.
- preCommit() - Method in interface nxopen.mechanicalrouting.SplitBuilder
-
Performs the operations needed prior to a commit.
- preCommit() - Method in interface nxopen.mechanicalrouting.StockBuilder
-
Performs the operations needed prior to a commit.
- preCommitCb(PartOperationImportCallbackData) - Method in interface nxopen.pdm.PartOperationImportObserver.PreCommitCb
-
User defined PreCommit callback that is called before commit of import operation
License requirements: None.
- preCommitThisPlacement() - Method in interface nxopen.mechanicalrouting.PartPlacementBuilder
-
- precopyoperationCb(SaveAsReviseCallbackData) - Method in interface nxopen.pdm.SaveAsReviseObserver.PrecopyoperationCb
-
User defined precopyoperation callback that is called just before SaveAs and Revise process
License requirements: None.
- preCreateBoundedPlaneAndEnlargedSurface() - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder
-
Pre-create a bounded plane or enlarged surface when the respective surface type is on.
- PREDEFINED - Static variable in class nxopen.cae.connections.CsysType
-
Predefined CSYS
- PREDEFINED - Static variable in class nxopen.cam.ProbeInspectBorebossMoveBuilder.Angle
-
Predefined angles
- predefined - Variable in class nxopen.mechatronics.ParameterStockBuilder.BoolParameterData
-
- predefined - Variable in class nxopen.mechatronics.ParameterStockBuilder.IntParameterData
-
- predefined - Variable in class nxopen.mechatronics.ParameterStockBuilder.ListParameterData
-
- predefined - Variable in class nxopen.mechatronics.ParameterStockBuilder.RealParameterData
-
- predefined - Variable in class nxopen.mechatronics.ParameterStockBuilder.StringParameterData
-
- predefinedDepth() - Method in interface nxopen.cam.HoleMachiningBuilder
-
Returns the predefined depth
License requirements: None.
- predefinedHydraulicOption() - Method in interface nxopen.tooling.DefineCamBuilder
-
Returns the hydraulic motion
License requirements: None.
- PREDICTED_PERCENT_DISSATISFIED - Static variable in class nxopen.cae.Result.Quantity
-
- predictionMethod() - Method in interface nxopen.HumanPosturePredictionBuilder
-
Returns the prediction method: aspect or pre_aspect
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- PREDRILL_ENGAGE_TYPE - Static variable in class nxopen.uf.UFCamgeom.CustomPointType
-
- PREDRILL_POINTS - Static variable in class nxopen.cam.CutParametersRegionSequencingTypes
-
Follow Predrill Points
- predrillPointsEffectDistBuilder() - Method in interface nxopen.cam.NcmPlanarBuilder
-
Returns the pre-drill points effective distance builder (inheritable tool dep)
License requirements: None.
- predrillPointsOutput() - Method in interface nxopen.cam.NcmPlanarBuilder
-
Returns the pre-drill points output option
License requirements: None.
- predrillPointsUseEffectDist() - Method in interface nxopen.cam.NcmPlanarBuilder
-
Returns the pre-drill points use effective distance
License requirements: None.
- Pref() - Constructor for class nxopen.uf.UFClear.Pref
-
- Pref(int, boolean, int, int, int, int) - Constructor for class nxopen.uf.UFClear.Pref
-
- preference() - Method in interface nxopen.cae.modelcheck.DuplicateElementsCheckBuilder
-
Returns the duplicate elements deleting preference
License requirements: None.
- preference() - Method in interface nxopen.cae.modelcheck.DuplicateNodesCheckBuilder
-
Returns the duplicate nodes merging preference
License requirements: None.
- preference() - Method in interface nxopen.cae.Post
-
Returns the
PostPreference
belonging to this session
Created in NX10.0.0
- Preference - Interface in nxopen.cae.xyplot
-
Manages the preference data.
- preference() - Method in interface nxopen.cae.xyplot.XYPlotManager
-
Returns the preference
License requirements: None.
- preference() - Method in interface nxopen.report.ReportManager
-
Returns the report preference.
- Preference.NewWindowChoice - Class in nxopen.cae.xyplot
-
Defines whether to always show plot graph on a new separate graphic window
- Preference.TargetGraphicWindowOption - Class in nxopen.cae.xyplot
-
Defines the target graphic window type
- preferenceElements() - Method in interface nxopen.cae.modelcheck.DuplicateElementsCheckBuilder
-
Returns the preference elements for keep selected and remove selected options
License requirements: nx_masterfem ("Finite Element Modeling")
.
- preferences() - Method in interface nxopen.annotations.AnnotationManager
-
Global annotation preferences .
- preferences() - Method in interface nxopen.BasePart
-
Returns the PartPreferences instance belonging to this part .
- Preferences - Interface in nxopen.cam
-
- PREFERENCES - Static variable in class nxopen.diagramming.CannedAnnotationBuilder.InheritOption
-
Setting the inherit from preferences option
- PREFERENCES - Static variable in class nxopen.diagramming.tables.TableBuilder.InheritOption
-
Setting the inherit from preferences option
- preferences() - Method in interface nxopen.Session
-
Returns the preferences instance for the session .
- preferences() - Method in interface nxopen.Sketch
-
Contains preferences for the sketch .
- Preferences() - Constructor for class nxopen.uf.UFCam.Preferences
-
- Preferences(int, int, int, int, int, int, boolean, boolean, boolean, int, boolean, boolean, int, int, boolean, int, boolean, int, boolean, int, int, boolean, int, int, boolean, int, double[], int, double[], int, boolean, boolean, boolean, boolean, boolean, boolean, boolean, String, boolean, int, int, boolean, boolean, int, boolean) - Constructor for class nxopen.uf.UFCam.Preferences
-
- Preferences.AnimationAccuracyTypes - Class in nxopen.cam
-
the animation accuracy types
- Preferences.AuxiliaryFloorColorSelectionTypes - Class in nxopen.cam
-
- Preferences.BlankSelectionTypes - Class in nxopen.cam
-
- Preferences.CheckSelectionTypes - Class in nxopen.cam
-
- Preferences.CsysInformationListingTypes - Class in nxopen.cam
-
the information listing types
- Preferences.CutAreaSelectionTypes - Class in nxopen.cam
-
- Preferences.GeometryTypes - Class in nxopen.cam
-
the geometry types
- Preferences.IpwDmrColoringTypes - Class in nxopen.cam
-
the IPW material removal coloring types
- Preferences.IpwToleranceModeTypes - Class in nxopen.cam
-
the IPW tolerance modes
- Preferences.PartSelectionTypes - Class in nxopen.cam
-
- Preferences.SelectionTypes - Class in nxopen.cam
-
the selection types
- Preferences.WallSelectionTypes - Class in nxopen.cam
-
- PreferencesAnnotationBuilder - Interface in nxopen.pid
-
Represents a PreferencesAnnotationBuilder
.
- PreferencesBuilder - Interface in nxopen.drafting
-
- PreferencesBuilder - Interface in nxopen.mechatronics
-
- PreferencesBuilder - Interface in nxopen.pid
-
- PreferencesBuilder.MasterTypes - Class in nxopen.mechatronics
-
the Co-Simulation master type.
- PreferencesConnectionBuilder - Interface in nxopen.pid
-
Represents a PreferencesConnectionBuilder
.
- PreferencesGeneralBuilder - Interface in nxopen.pid
-
Represents a PreferencesGeneralBuilder
.
- PreferencesOffSheetConnectorBuilder - Interface in nxopen.pid
-
Represents a PreferencesOffSheetConnectorBuilder
.
- PreferencesOffSheetConnectorBuilder.StyleOption - Class in nxopen.pid
-
the style of OSC elements.
- preferfeatureelementedge - Variable in class nxopen.cae.ElemEdgePathMethod.SeedsData
-
if true, prefer feature element edges
- preferfreeedges - Variable in class nxopen.cae.EdgePathMethod.SeedsData
-
if true, prefer free edges
- preferfreeedges - Variable in class nxopen.cae.ElemEdgePathMethod.SeedsData
-
if true, prefer free element edges
- prefergeometryassociatededges - Variable in class nxopen.cae.ElemEdgePathMethod.SeedsData
-
if true, prefer geometry associated element edges
- preferredFifthAngle() - Method in interface nxopen.cam.ToolAxisFixed
-
Returns the preferred fifth angle
License requirements: None.
- preferredFourthAngle() - Method in interface nxopen.cam.ToolAxisFixed
-
Returns the preferred fouth angle
License requirements: None.
- preferredLabel() - Method in interface nxopen.cae.BushingEADBuilder
-
Returns the get preferred csys label gets the label assigned to the csys data
License requirements: nx_masterfem ("Finite Element Modeling")
.
- preferredlabel - Variable in class nxopen.cae.ElementAssociatedDataUtils.AskBushingData
-
Preferred coordinate system label for csys data export.
- preferredlabel - Variable in class nxopen.cae.ElementAssociatedDataUtils.AskShellData
-
Preferred coordinate system label for csys data export.
- preferredLabel() - Method in interface nxopen.cae.ShellEADBuilder
-
Returns the get preferred csys label gets the label assigned to the csys data
License requirements: nx_masterfem ("Finite Element Modeling")
.
- PreferredPortAttributeData() - Constructor for class nxopen.preferences.RoutingPart.PreferredPortAttributeData
-
- preferredPortMethodFlag() - Method in interface nxopen.preferences.RoutingPart
-
Returns the current method for determining the preferred placement port.
- preferredTiltAngle() - Method in interface nxopen.cam.ToolPathTiltAvoidance
-
Returns the preferred tilt angle
License requirements: None.
- preferredTiltAngle() - Method in interface nxopen.cam.ToolPathTiltBuilder
-
- preferStringConstraints() - Method in interface nxopen.InferredConstraintsBuilder
-
Returns the prefer string constraints setting.
- PREFIX - Static variable in class nxopen.annotations.ChamferSymbolPlacement
-
CHAM 5 x 5
- prefix() - Method in interface nxopen.annotations.TableCellStyleBuilder
-
Returns the prefix
License requirements: None.
- PREFIX - Static variable in class nxopen.annotations.TrueLengthTextPosition
-
Display True Length Text before dimension value
- prefix() - Method in interface nxopen.drawings.ViewSettingsBuilder
-
Returns the prefix string
License requirements: None.
- prefix() - Method in interface nxopen.routing.BranchPathNumberingBuilder
-
Returns the prefix specified in the UI for the labels
License requirements: routing_hvac ("Routing HVAC")
.
- PREFIX - Static variable in class nxopen.tooling.RenameAndExportComponentBuilder.NamingRuleType
-
- prefix - Variable in class nxopen.uf.UFTabnot.CellPrefs
-
- prefixCharacterHeightFactor() - Method in interface nxopen.drawings.ViewDetailLabelBuilder
-
Returns the prefix character height factor
License requirements: None.
- prefixCharacterHeightFactor() - Method in interface nxopen.drawings.ViewLabelBuilder
-
Returns the prefix character height factor
License requirements: None.
- prefixCharacterHeightFactor() - Method in interface nxopen.drawings.ViewSectionLabelBuilder
-
Returns the prefix character height factor
License requirements: None.
- prefixOrSuffixString() - Method in interface nxopen.tooling.RenameAndExportComponentBuilder
-
Returns the prefix or suffix string
License requirements: None.
- prefixStr() - Method in interface nxopen.pdm.PartOperationImportBuilder
-
Returns the prefix str
License requirements: None.
- prefixSuffixReference() - Method in interface nxopen.annotations.DimensionPreferences
-
Returns the flag indicating whether prefix suffix reference toggle is turned on or not
License requirements: None.
- prefixSuffixReference() - Method in interface nxopen.annotations.DimensionStyleBuilder
-
Returns the flag indicating whether prefix suffix reference toggle is turned on or not
License requirements: None.
- Prefs() - Constructor for class nxopen.uf.UFPlist.Prefs
-
- Prefs(UFTabnot.SectionPrefs, UFPlist.GrowDirection, UFPlist.LdrMethod, boolean, String, int, UFPlist.SymbolType, String, String, String, boolean, boolean, boolean, boolean, boolean) - Constructor for class nxopen.uf.UFPlist.Prefs
-
- preliminaryBuild() - Method in interface nxopen.die.DrawDiePunchBuilder
-
Returns the preliminary build switch of the draw die punch casting, if true the fast build options will be used,
if false accurate build options will be used.
- PRELOAD - Static variable in class nxopen.motion.BushingCylindricalCoefficientTypes
-
preload type
- PRELOAD - Static variable in class nxopen.motion.BushingSphericalCoefficientTypes
-
preload type
- preload() - Method in interface nxopen.motion.JointFrictionAdams
-
Returns the preload
License requirements: mechanisms ("MECHANISMS")
.
- preload() - Method in interface nxopen.motion.JointFrictionRecurDyn
-
Returns the preload
License requirements: mechanisms ("MECHANISMS")
.
- PRELOAD_PROPERTY - Static variable in class nxopen.motion.TextBasedElementBuilder.TypeChoices
-
- preloadAngleExpression() - Method in interface nxopen.motion.SpringBuilder
-
- preloadCoefficients() - Method in interface nxopen.motion.BushingCylindricalCoefficients
-
Returns the preload coefficients.
- preloadCoefficients() - Method in interface nxopen.motion.BushingGeneralCoefficients
-
- preloadCoefficients() - Method in interface nxopen.motion.BushingSphericalCoefficients
-
Returns the preload coefficients.
- preloadedAngleExpression() - Method in interface nxopen.motion.SpringBuilder
-
Returns the preloaded angle expression
License requirements: None.
- preloadedLengthExpression() - Method in interface nxopen.motion.SpringBuilder
-
Returns the preloaded length expression
License requirements: None.
- preloadExpression() - Method in interface nxopen.motion.SpringBuilder
-
- preloadForceExpression() - Method in interface nxopen.motion.SpringBuilder
-
- preloadMomentExpression() - Method in interface nxopen.motion.SpringBuilder
-
- prepairToSplitInsert() - Method in interface nxopen.tooling.SplitInsertBuilder
-
Suppress child feature.
- prepareAllRemovingSheets(Body[]) - Method in interface nxopen.tooling.AssignPatchBuilder
-
Get all the related sheets in one feature set.
- PREPARED - Static variable in class nxopen.weld.WeldGrooveBuilder.Edge
-
Prepared
- prepareDataForConnectivity() - Method in interface nxopen.mechanicalrouting.PartPlacementBuilder
-
Prepare data to build connectivity for all placed parts.
- prepareEdges() - Method in interface nxopen.weld.GrooveBuilder
-
- prepareEdges() - Method in interface nxopen.weld.WeldGrooveBuilder
-
Returns the type of edges to prepare
License requirements: ugweld ("UG WELD")
.
- prepareForMeasure(NXObject, View) - Method in interface nxopen.display.DynamicSectionCut
-
Prepares the section-cut for measurement.
- prepareMappingData() - Method in interface nxopen.Section
-
Prepares Mapping Data
This method should be used to create mapping data if mapping is to be done
License requirements: gateway ("UG GATEWAY")
.
- prepareToMove(CageManipulatorData.ObjectMoveData) - Method in interface nxopen.features.subdivision.CageManipulatorData
-
Prepares data to move the objects.
- PREPEND_STRING - Static variable in class nxopen.uf.UFClone.NameRuleType
-
- PreprocessGeometryBuilder - Interface in nxopen.cam
-
- PreprocessGeometryBuilder.ObjectsData - Class in nxopen.cam
-
- PreprocessGeometryBuilder.ParameterData - Class in nxopen.cam
-
- PRESELECT - Static variable in class nxopen.sim.KinematicSinumerikCaBuilder.PlcInitStateTypes
-
Preselect
- preselectGeometry() - Method in interface nxopen.cam.Geometry
-
Pre-select the wall geometry
License requirements: cam_base ("CAM BASE")
.
- preselectionColor() - Method in interface nxopen.preferences.PartVisualizationColorSetting
-
Returns the preselection color.
- preselectionColor - Variable in class nxopen.uf.UFDisp.DrawingDisplayData
-
- preselectionColor - Variable in class nxopen.uf.UFDisp.SystemParams
-
- preSelectionInvisibleSelection() - Method in interface nxopen.tooldesigner.MultiSectionBuilder
-
Returns the preSelection Getter
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- PRESENT_STATE - Static variable in class nxopen.uf.UFClone.PartStateS
-
- presentationName() - Method in interface nxopen.diagramming.SheetBuilder
-
Returns the presentation name that will be visible in the "Presentation" column of the Item Rev dialog.
- presentationName() - Method in interface nxopen.drawings.MarkAsTemplateBuilder
-
Returns the presentation name of the template that will be displayed in the File->New dialog.
- presentationStyleAsString() - Method in interface nxopen.blockstyler.DoubleBlock
-
Returns the PresentationStyle as string
License requirements: None.
- presentationStyleAsString() - Method in interface nxopen.blockstyler.Enumeration
-
Returns the PresentationStyle as string
License requirements: None.
- presentationStyleAsString() - Method in interface nxopen.blockstyler.IntegerBlock
-
Returns the PresentationStyle as string
License requirements: None.
- presentationStyleAsString() - Method in interface nxopen.blockstyler.StringBlock
-
Returns the PresentationStyle as string
License requirements: None.
- PRESERVE - Static variable in class nxopen.drafting.AnnotateViewsBuilder.ExistingAutomaticAnnotation
-
- PRESERVE - Static variable in class nxopen.features.shipdesign.DrawingAnnotationBuilder.Annotation
-
- PRESERVE_ALL - Static variable in class nxopen.preferences.SessionSketch.GroupConstraintType
-
Preserves all external constraints
- PRESERVE_ALL - Static variable in class nxopen.preferences.SessionSketch.RigidSetConstraintType
-
Deprecated.
Preserves all external constraints
- PRESERVE_REFSET - Static variable in class nxopen.PartCollection.RefsetOption
-
Use the component's current reference set,
and do not reset the reference set of the previous work component
- preserveChangeSymbol(IdSymbol[]) - Method in interface nxopen.DrawingCompareManager
-
Preserves the change symbol settings of the objects passed to it.
- preserveChangeSymbolDisplay() - Method in interface nxopen.drawings.TrackDrawingChangesGeneralBuilder
-
Returns the preserve Change Symbol Display
License requirements: None.
- preserveDraftingLayer() - Method in interface nxopen.drawings.AnnotationSettingsBuilder
-
Returns the preserve drafting layer
License requirements: None.
- preserveFieldOfViewAngleForFit() - Method in interface nxopen.preferences.SessionVisualizationScreen
-
Returns whether for a perspective view the Fit operation should not change the
field of view angle from the camera position to the view bounds
License requirements: None.
- preserveFolderStructure() - Method in interface nxopen.annotations.ImportAutocadBlockBuilder
-
Returns the folder structure toggle
License requirements: nx_layout ("NX Layout")
.
- preserveFolderStructure() - Method in interface nxopen.annotations.ImportSymbolBuilder
-
Returns the folder structure toggle
License requirements: nx_layout ("NX Layout")
.
- preserveGuideShapeOption() - Method in interface nxopen.features.SweptBuilder
-
Returns the preserve guide shape option.
- preserveHiddenStatus() - Method in interface nxopen.drawings.AnnotationSettingsBuilder
-
Returns the preserve hidden status
License requirements: None.
- preserveNominalGeometry() - Method in interface nxopen.preferences.SessionNXGateway
-
Returns the preserve nominal geometry flag.
- preserveShape() - Method in interface nxopen.features.ThroughCurvesBuilder
-
Returns the preserve shape.
- preserveShapeOption() - Method in interface nxopen.features.SweptBuilder
-
Returns the preserve shape option.
- pressDirection() - Method in interface nxopen.die.LineupBuilder
-
Returns the press direction of the lineup
License requirements: die_engineering ("DIE ENGINEERING")
.
- pressDirection() - Method in interface nxopen.die.RotorBuilder
-
Returns the press direction of the rotor casting.
- PressModel - Interface in nxopen.die
-
Represents a Die Simulation - Press Model .
- pressModelFilePath() - Method in interface nxopen.presslinesimulation.ConvertFromDieValidationBuilder
-
Returns the press model file path
License requirements: None.
- pressModelPartPath() - Method in interface nxopen.presslinesimulation.SetPressModelBuilder
-
Returns the file path to the press model root part
License requirements: None.
- pressModelPath() - Method in interface nxopen.tooling.SetPressModelBuilder
-
Returns the path to clone available press model
License requirements: None.
- PressModelRoot - Interface in nxopen.die
-
Represents a Die Simulation - Press Model Root.
- pressStart() - Method in interface nxopen.presslinesimulation.UserMotionBuilder
-
Returns the press start angle.
- pressStartAngle() - Method in interface nxopen.tooling.DefineCamBuilder
-
Returns the press start angle
License requirements: None.
- pressStartAngle() - Method in interface nxopen.tooling.UserDefinedMotionBuilder
-
Returns the press start angle
License requirements: None.
- pressStop() - Method in interface nxopen.presslinesimulation.UserMotionBuilder
-
Returns the press stop angle.
- pressStopAngle() - Method in interface nxopen.tooling.DefineCamBuilder
-
Returns the press stop angle
License requirements: None.
- pressStopAngle() - Method in interface nxopen.tooling.UserDefinedMotionBuilder
-
Returns the press stop angle
License requirements: None.
- pressure() - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
Returns the pressure on blank holder.
- pressure() - Method in interface nxopen.cae.DurSpecialistSuperpositionEventBuilder
-
Returns the unit load pressure
License requirements: None.
- PRESSURE - Static variable in class nxopen.cae.FrfSet.Measure
-
Pressure
- PRESSURE - Static variable in class nxopen.cae.Result.Quantity
-
- PRESSURE - Static variable in class nxopen.cae.XyFunctionMeasure
-
Pressure unit
- PRESSURE - Static variable in class nxopen.features.shipdesign.RollingLineBuilder.Types
-
Create multiple lines on the surface where the tangential for each line is constant on intersecting plane sections.
- PRESSURE_ABSOLUTE_MODAL - Static variable in class nxopen.cae.Result.Quantity
-
- PRESSURE_AT - Static variable in class nxopen.cae.XyFunctionUnit
-
Pressure unit: atm
- PRESSURE_BAR - Static variable in class nxopen.cae.XyFunctionUnit
-
Pressure unit: bar
- PRESSURE_CN_CM2 - Static variable in class nxopen.cae.XyFunctionUnit
-
Pressure unit: cN/cm^2
- PRESSURE_COHESIVE - Static variable in class nxopen.cae.Result.Quantity
-
- PRESSURE_DROP - Static variable in class nxopen.tooling.FlowDisplayBuilder.AnalysisResults
-
- PRESSURE_DROP_TO_VELOCITY_RATIO - Static variable in class nxopen.cae.Result.Quantity
-
- PRESSURE_GRADIENT - Static variable in class nxopen.cae.Result.Quantity
-
- PRESSURE_HIGH - Static variable in class nxopen.uf.UFPath.Pressure
-
- PRESSURE_IN_H2O - Static variable in class nxopen.cae.XyFunctionUnit
-
Pressure unit: in-H2O
- PRESSURE_IN_HG - Static variable in class nxopen.cae.XyFunctionUnit
-
Pressure unit: in-Hg
- PRESSURE_KGF_CM2 - Static variable in class nxopen.cae.XyFunctionUnit
-
Pressure unit: kgf/cm^2
- PRESSURE_KGF_M2 - Static variable in class nxopen.cae.XyFunctionUnit
-
Pressure unit: kgf/m^2 (140)
- PRESSURE_KGF_MM2 - Static variable in class nxopen.cae.XyFunctionUnit
-
Pressure unit: kgf/mm^2
- PRESSURE_KPA - Static variable in class nxopen.cae.XyFunctionUnit
-
Pressure unit: KPa
- PRESSURE_LAST_ELEMENT - Static variable in class nxopen.uf.UFPath.Pressure
-
- PRESSURE_LBF_FT - Static variable in class nxopen.cae.XyFunctionUnit
-
Pressure unit: lbf/ft^2
- PRESSURE_LOW - Static variable in class nxopen.uf.UFPath.Pressure
-
- PRESSURE_MEDIUM - Static variable in class nxopen.uf.UFPath.Pressure
-
- PRESSURE_MM_H2O - Static variable in class nxopen.cae.XyFunctionUnit
-
Pressure unit: mm-H2O
- PRESSURE_MM_HG - Static variable in class nxopen.cae.XyFunctionUnit
-
Pressure unit: mm-Hg
- PRESSURE_MPA - Static variable in class nxopen.cae.XyFunctionUnit
-
Pressure unit: MPa
- PRESSURE_NCM2 - Static variable in class nxopen.cae.XyFunctionUnit
-
Pressure unit: N/cm^2
- PRESSURE_NONE - Static variable in class nxopen.uf.UFPath.Pressure
-
- PRESSURE_ON_NEGATIVE_SIDE - Static variable in class nxopen.cae.Result.Quantity
-
- PRESSURE_ON_POSITIVE_SIDE - Static variable in class nxopen.cae.Result.Quantity
-
- PRESSURE_OVER_VOLUME_VELOCITY - Static variable in class nxopen.cae.Result.Quantity
-
- PRESSURE_PA - Static variable in class nxopen.cae.XyFunctionUnit
-
Pressure unit: Pa
- PRESSURE_PSI - Static variable in class nxopen.cae.XyFunctionUnit
-
Pressure unit: Psi
- PRESSURE_REGISTER - Static variable in class nxopen.uf.UFPath.Pressure
-
- pressureA() - Method in interface nxopen.mechatronics.HydraulicCylinderBuilder
-
Returns the initial pressure of chamber A.
- pressureA() - Method in interface nxopen.mechatronics.PneumaticCylinderBuilder
-
Returns the initial pressure of chamber A.
- pressureB() - Method in interface nxopen.mechatronics.HydraulicCylinderBuilder
-
Returns the initial pressure of chamber B.
- pressureB() - Method in interface nxopen.mechatronics.PneumaticCylinderBuilder
-
Returns the initial pressure of chamber B.
- pressureFlag - Variable in class nxopen.uf.UFPath.Flush
-
- PressureSystemChildBuilder - Interface in nxopen.die
-
Represents a Die Pressure System Child sub feature.
- pressureSystemParent() - Method in interface nxopen.die.DrawDiePunchBuilder
-
Returns the pressure system parent builder of the draw die punch.
- PressureSystemParentBuilder - Interface in nxopen.die
-
Represents a Die Pressure System Parent sub feature.
- pressureSystemReversalParent() - Method in interface nxopen.die.DrawDiePunchBuilder
-
Returns the pressure system reversal parent builder of the draw die punch.
- preStressCase() - Method in interface nxopen.cae.DurSpecialistSuperpositionEventBuilder
-
Returns the pre-stress case
License requirements: None.
- preStressIncluded() - Method in interface nxopen.cae.DurSpecialistSuperpositionEventBuilder
-
Returns the flag if pre-stress is included in all other subcases.
- preStressScale() - Method in interface nxopen.cae.DurSpecialistSuperpositionEventBuilder
-
Returns the pre-stress scale factor
License requirements: None.
- preStressUpdate() - Method in interface nxopen.cae.DurSpecialistSuperpositionEventBuilder
-
Returns the pre-stress update method.
- PreTestDofSet - Interface in nxopen.cae
-
Represents Dof Set within a pre-test setup
To create or edit an instance of this class, use
PreTestDofSetBuilder
Created in NX7.5.0
- PreTestDofSetBuilder - Interface in nxopen.cae
-
- PreTestExciterConfig - Interface in nxopen.cae
-
Represent a exciter selection configuration
To create or edit an instance of this class, use
PreTestExciterConfigBuilder
Created in NX8.0.0
- PreTestExciterConfigBuilder - Interface in nxopen.cae
-
- PreTestExciterConfigBuilder.MethodChoiceType - Class in nxopen.cae
-
Selected method for the exciter selection
- PreTestExciterConfigBuilder.OffAxisAngleChoiceType - Class in nxopen.cae
-
Selected off axis angle for the exciter selection
- PreTestExciterConfigCollection - Interface in nxopen.cae
-
Represents a collection of exciter selection configuration
To obtain an instance of this class, refer to
PreTestExciterSelectionControl
Created in NX8.0.0
- PreTestExciterSelectionControl - Interface in nxopen.cae
-
Represents a pre-test exciter selection setup
To obtain an instance of this class, refer to
PreTestSolution
Created in NX8.0.0
- PreTestExciterSelectionDofSetCollection - Interface in nxopen.cae
-
Represents a collection of exciter selection configuration.
- PreTestExportUnvBuilder - Interface in nxopen.cae
-
- PreTestExportUnvBuilder.FileUnitsOption - Class in nxopen.cae
-
The unit type enum
- preTests() - Method in interface nxopen.cae.CorrelManager
-
Returns the pre-test collection belonging to this sim part.
- PreTestSensorConfig - Interface in nxopen.cae
-
Represent a sensor selection configuration
To create or edit an instance of this class, use
PreTestSensorConfigBuilder
Created in NX7.5.0
- PreTestSensorConfigBuilder - Interface in nxopen.cae
-
- PreTestSensorConfigBuilder.AlgorithmChoiceType - Class in nxopen.cae
-
Selected algorithm for the sensor selection
- PreTestSensorConfigCollection - Interface in nxopen.cae
-
Represents a collection of sensor selection configuration
To obtain an instance of this class, refer to
PreTestSensorSelectionControl
Created in NX7.5.0
- PreTestSensorSelectionControl - Interface in nxopen.cae
-
Represents a pre-test sensor selection setup
To obtain an instance of this class, refer to
PreTestSolution
Created in NX7.5.0
- PreTestSensorSelectionDofSetCollection - Interface in nxopen.cae
-
Represents a collection of sensor selection configuration.
- PreTestSolution - Interface in nxopen.cae
-
Represents a pre-test setup
To create or edit an instance of this class, use
PreTestSolutionBuilder
Created in NX7.5.0
- PreTestSolutionBuilder - Interface in nxopen.cae
-
- PreTestSolutionBuilder.ModeConversionType - Class in nxopen.cae
-
Enum type for the complex mode conversion settings
- PreTestSolutionCollection - Interface in nxopen.cae
-
Represents a collection of pre-test setups
To obtain an instance of this class, refer to
CorrelManager
Created in NX7.5.0
- preUpdateCallback(CustomFeaturePreUpdateEvent) - Method in interface nxopen.features.CustomFeatureClass.PreUpdateCallback
-
Prototype for pre update callbacks
License requirements: solid_modeling ("SOLIDS MODELING")
.
- Prev16Align() - Constructor for class nxopen.uf.UFAssem.Prev16Align
-
- Prev16Align(Tag, Tag, String, int, String, Tag, String, double, String, String) - Constructor for class nxopen.uf.UFAssem.Prev16Align
-
- PREV_PLANE - Static variable in class nxopen.cam.NcmPlanarBuilder.TransferBetweenLevelsTypes
-
previous plane
- PREV_PLANE - Static variable in class nxopen.cam.NcmPlanarBuilder.TransferBetweenRegionsTypes
-
previous plane
- PREV_PLANE - Static variable in class nxopen.cam.NcmPlanarBuilder.TransferWithinLevelsTypes
-
previous plane
- PREV_PLANE - Static variable in class nxopen.cam.NcmTransfer.TransferTypes
-
previous plane
- prevButton() - Method in interface nxopen.tooldesigner.MultiSectionBuilder
-
Prev Button
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- prevButton() - Method in interface nxopen.tooldesigner.SetGunApproachBuilder
-
Previous non-collision section in the clearance caluclation
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- PREVENT - Static variable in class nxopen.assemblies.productinterface.ObjectBuilder.Mate
-
restrict user from using non product interface objects
- PREVENT - Static variable in class nxopen.assemblies.productinterface.ObjectBuilder.Wave
-
restrict user from using non product interface objects
- PREVENT_CONFLICT - Static variable in class nxopen.preferences.SessionSketch.GroupConstraintType
-
Preserves external constraints and prevents new conflicts
- PREVENT_CONFLICT - Static variable in class nxopen.preferences.SessionSketch.RigidSetConstraintType
-
Deprecated.
Preserves external constraints and prevents new conflicts
- PreventCollision - Interface in nxopen.mechatronics
-
Represents the Prevent Collision Constraint.
- PreventCollisionBuilder - Interface in nxopen.mechatronics
-
- PreventCollisionCollection - Interface in nxopen.mechatronics
-
Represents a collection of Prevent Collision Constraint.
- preventCollisions() - Method in interface nxopen.mechatronics.PhysicsManager
-
- preventUndercutting() - Method in interface nxopen.cam.MillCutParameters
-
- preview() - Method in interface nxopen.mechanicalrouting.MovePathBuilder
-
Returns the preview setting
License requirements: routing_base ("Routing Basic")
.
- PREVIEW - Static variable in class nxopen.ModelingViewHighQualityImage.ShadeMethod
-
An improvement over the Improved method.
- PREVIEW - Static variable in class nxopen.uf.UFDisp.ShadeMethod
-
- PREVIEW2D - Static variable in class nxopen.pdm.FileManagement.FileType
-
- PREVIEW3D - Static variable in class nxopen.pdm.FileManagement.FileType
-
- PREVIEW_COLLINEAR - Static variable in class nxopen.uf.UFDisp.PolyMarker
-
- PREVIEW_COLLINEAR - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- PREVIEW_HORIZONTAL - Static variable in class nxopen.uf.UFDisp.PolyMarker
-
- PREVIEW_HORIZONTAL - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- PREVIEW_PARALLEL - Static variable in class nxopen.uf.UFDisp.PolyMarker
-
- PREVIEW_PARALLEL - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- PREVIEW_PERPENDICULAR - Static variable in class nxopen.uf.UFDisp.PolyMarker
-
- PREVIEW_PERPENDICULAR - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- PREVIEW_POINT_ON_CURVE - Static variable in class nxopen.uf.UFDisp.PolyMarker
-
- PREVIEW_POINT_ON_CURVE - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- PREVIEW_RENDER - Static variable in class nxopen.display.TrueStudioBuilder.RenderMethod
-
Many rendering effects are not honored.
- PREVIEW_TANGENT - Static variable in class nxopen.uf.UFDisp.PolyMarker
-
- PREVIEW_TANGENT - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- PREVIEW_VERTICAL - Static variable in class nxopen.uf.UFDisp.PolyMarker
-
- PREVIEW_VERTICAL - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- PREVIEW_X - Static variable in class nxopen.uf.UFDisp.PolyMarker
-
- PREVIEW_X - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- PREVIEW_Y - Static variable in class nxopen.uf.UFDisp.PolyMarker
-
- PREVIEW_Y - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- PREVIEW_Z - Static variable in class nxopen.uf.UFDisp.PolyMarker
-
- PREVIEW_Z - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- previewButton() - Method in interface nxopen.cae.AutoCyclicSymmetryPairsBuilder
-
Preview the list of face-pairs
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- previewButton() - Method in interface nxopen.cae.AutoPairsBuilder
-
Preview the list of face-pairs
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- previewComponentOnAdd() - Method in interface nxopen.preferences.SessionAssemblies
-
- previewEnabled() - Method in interface nxopen.cam.DPMItpBuilder
-
Returns the use of preview
License requirements: cam_base ("CAM BASE")
.
- previewFalseBody() - Method in interface nxopen.tooling.PocketBuilder
-
Returns the option for previewing family part false bodies.
- previewImage() - Method in interface nxopen.issue.IssueContent
-
Returns the preview image
License requirements: nx_issue_mgmt ("NX Issue Tracking")
.
- PreviewImageData() - Constructor for class nxopen.BasePart.PreviewImageData
-
- previewImageFile() - Method in interface nxopen.tooling.ReusableObject
-
Returns the preview image file
License requirements: None.
- previewLeftImage() - Method in interface nxopen.features.shipdesign.QualifySketchBuilder
-
Previews left image.
- previewMaximumDistanceBuilder() - Method in interface nxopen.cam.ToolAxisAdvanced
-
Returns the preview maximum distance
License requirements: None.
- previewMesh() - Method in interface nxopen.cae.MappedMeshBuilder
-
Previews the mapped mesh for further edit.
- previewNodeLocation(PageObject, double, double, boolean, int) - Method in interface nxopen.ame.ProjectEngineeringObjectBuilder
-
The preview node location on page.
- previewOption() - Method in interface nxopen.cae.responsesimulation.DynamicEvaluationOutputSettings
-
Returns the preview option.
- previewOption() - Method in interface nxopen.geometricanalysis.GapFlushnessBuilder
-
Returns the preview option
License requirements: solid_modeling ("SOLIDS MODELING")
.
- previewPointData(boolean) - Method in interface nxopen.cam.InspectionCurveFeatureBuilder
-
Creates preview of point definition data
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- previewPointData(boolean) - Method in interface nxopen.cam.InspectionSurfaceFeatureBuilder
-
Creates preview of point definition data
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- PreviewPropertiesBuilder - Interface in nxopen
-
- PreviewPropertiesBuilder.ModelViewCreationOptions - Class in nxopen
-
Specifies when the model view preview will be created
- PreviewPropertiesBuilder.PartCreationOptions - Class in nxopen
-
Specifies when the part preview will be created
- previewResolution() - Method in interface nxopen.preferences.SessionModeling
-
Returns the preview resolution setting.
- previewRightImage() - Method in interface nxopen.features.shipdesign.QualifySketchBuilder
-
Previews right image.
- previewSelectedFillComponent() - Method in interface nxopen.tooling.MoldFillingBuilder
-
Preview selected fill component.
- previewStyle() - Method in interface nxopen.drawings.ViewWorkflowBuilder
-
Returns the style of the preview when adding a view to the drawing
License requirements: None.
- previewToggle() - Method in interface nxopen.display.IrayPlusMaterialEditorBuilder
-
Returns a boolean value that indicate whether the preview toggle is ON.
- previewToggle() - Method in interface nxopen.routing.ModelTerminalsBuilder
-
Returns the preview
License requirements: routing_harness ("Routing Harness")
.
- PREVIOUS - Static variable in class nxopen.features.StudioXformBuilderEx.InsertPoleType
-
Insert pole previous to the selected pole
- previous() - Method in interface nxopen.tooling.RunSimulationBuilder
-
Previous simulation result
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- PREVIOUS_CHECK - Static variable in class nxopen.cam.TeachmodeProfileMoveBuilder.DriveGeometryTypes
-
Use Previous Drive Geometry
- PREVIOUS_DRIVE - Static variable in class nxopen.cam.TeachmodeProfileMoveBuilder.DriveGeometryTypes
-
Use Previous Stop Check Geometry
- PREVIOUS_LEVEL - Static variable in class nxopen.cam.NcmPlanarEngRetBuilder.MeasureHeightFrom
-
Measure from previous level
- PREVIOUS_SEGMENT - Static variable in class nxopen.cam.BoundaryTurnMemberFineFinishCorner.AppliedTo
-
- PREVIOUS_TOOL - Static variable in class nxopen.cam.CornerControlBuilder.SlowdownDistanceOptions
-
previous tool
- previousChild - Variable in class nxopen.uf.UFAssem.InstanceStatus
-
- previousNode() - Method in interface nxopen.blockstyler.Node
-
Returns the previous node which might not belong to the same hierarchy.
- PREVIOUSSEGMENT - Static variable in class nxopen.cam.BoundaryTurnMemberCorner.AngleValueType
-
- previousSelectedNode() - Method in interface nxopen.blockstyler.Node
-
Returns the previous selected node in the whole tree hierarchy.
- previousSiblingNode() - Method in interface nxopen.blockstyler.Node
-
Returns the previous node which belongs to the same hierarchy.
- previousSolution() - Method in interface nxopen.routing.PlacementSolutionsBuilder
-
Cycle to the previous solution
License requirements: routing_base ("Routing Basic")
.
- previousToolDiameter() - Method in interface nxopen.cam.CornerControlBuilder
-
Returns the tool diameter.
- previousWorkPart() - Method in interface nxopen.tooling.BackingPadBuilder
-
Returns the previous work part
License requirements: None.
- previousWorkPart() - Method in interface nxopen.tooling.SlugRetentionBuilder
-
Returns the previous work part
License requirements: None.
- prevPosDataFlag - Variable in class nxopen.cam.CamOperationMotionPostDataType
-
Prev pos data available
- prevSearchResultsButton() - Method in interface nxopen.tooldesigner.AssociateDatumsUnitDesignsBuilder
-
Prev Search Button
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- prevSearchResultsButton() - Method in interface nxopen.tooldesigner.SelectFixtureUnitsBuilder
-
Prev Search Button
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- PRICIPAL_AXIS - Static variable in class nxopen.weld.JointmarkBuilder.ProjectionDirectionOptions
-
- priDatLetter() - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
Returns the pri dat letter
License requirements: None.
- priDirection() - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
Returns the pri direction
License requirements: None.
- PRIMARY - Static variable in class nxopen.cae.CreateJtBuilder.Component
-
Value represents all primary components
- PRIMARY - Static variable in class nxopen.display.DynamicSectionTypes.ActivePlane
-
Primary
- primary() - Method in interface nxopen.features.shipdesign.PlateSystemBuilder
-
Returns the primary stiffener direction.
- PRIMARY - Static variable in class nxopen.features.ThroughCurveMeshBuilder.EmphasisType
-
Emphasis on primary strings.
- primary() - Method in interface nxopen.mechatronics.GanttLinkerBuilder
-
Returns the accessor for first operation object which is going to be linked
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- primary - Variable in class nxopen.uf.UFGdt.DrfData
-
- PRIMARY_DIRECTION - Static variable in class nxopen.cam.fbm.FeatureGeometry.SortOrder
-
Sort order: Primary Direction
- PRIMARY_GEOMETRY - Static variable in class nxopen.drawings.DraftingComponentSelectionBuilder.Geometry
-
indicates the component objects are to be rendered with Primary geometry color/font/width
- PRIMARY_MIN_STRING_2 - Static variable in class nxopen.uf.UFConstants
-
- PRIMARY_PARTS - Static variable in class nxopen.weld.WeldBeadBuilder.BeadLocationMethod
-
on the primary parts
- primaryArrangement() - Method in interface nxopen.positioning.ComponentPositioner
-
- primaryCompoundDatumReference() - Method in interface nxopen.annotations.FeatureControlFrameDataBuilder
-
Returns the primary compound datum reference
License requirements: None.
- primaryContent() - Method in interface nxopen.drafting.DrawingCreationWizardBuilder
-
Returns the primary content.
- PrimaryContentItemBuilder - Interface in nxopen.drafting
-
- PrimaryContentItemBuilderList - Interface in nxopen.drafting
-
Represents a list of objects.
- primaryCurvesList() - Method in interface nxopen.features.ThroughCurveMeshBuilder
-
Returns the primary curves list which is required.
- primaryDatumDualMCMType() - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
- primaryDatumDualText() - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
- primaryDatumExtendedText() - Method in interface nxopen.annotations.FeatureControlFrameDataBuilder
-
Returns the primary datum extended text.
- primaryDatumMCMType() - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
- primaryDatumReference() - Method in interface nxopen.annotations.FeatureControlFrameDataBuilder
-
Returns the primary datum reference
License requirements: None.
- primaryDatumText() - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
- primaryDegree() - Method in interface nxopen.SurfaceRebuildData
-
Returns
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- primaryDimensionDecimalPlaces() - Method in interface nxopen.annotations.LinearTolerance
-
Returns the number of decimal places for primary dimension
License requirements: None.
- primaryDimensionFractionDenominator() - Method in interface nxopen.annotations.DimensionPreferences
-
Returns the primary dimension and tolerance fraction denominator
License requirements: None.
- primaryDimensionFractionDenominator() - Method in interface nxopen.annotations.DimensionStyleBuilder
-
Returns the primary dimension fractional denominator
License requirements: None.
- primaryDimensionTextFormat() - Method in interface nxopen.annotations.UnitsFormatPreferences
-
Returns the primary dimension text format
License requirements: None.
- primaryDimensionUnit() - Method in interface nxopen.annotations.UnitsFormatPreferences
-
Returns the primary dimension unit
License requirements: None.
- primaryDirection() - Method in interface nxopen.cam.InspectionAlignmentAssistantBuilder
-
Returns the primary direction
License requirements: None.
- primaryEdge() - Method in interface nxopen.weld.JointItemBuilder
-
Returns the primary edge of a butt weld.
- primaryEdge() - Method in interface nxopen.weld.WeldJointBuilder
-
Returns the primary edge of a butt weld.
- PrimaryEdgeFace() - Constructor for class nxopen.cae.Post.PrimaryEdgeFace
-
- PrimaryEdgeFace(Post.EdgeStyle, NXColor, Post.FaceFillStyle, NXColor) - Constructor for class nxopen.cae.Post.PrimaryEdgeFace
-
Constructor for the PrimaryEdgeFace object.
- primaryEdges() - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder
-
Returns the primary edges for creating transition parting surface.
- primaryFace() - Method in interface nxopen.weld.JointItemBuilder
-
Returns the primary face of a butt weld.
- primaryFace() - Method in interface nxopen.weld.WeldJointBuilder
-
Returns the primary face of a butt weld.
- primaryFaceNormal - Variable in class nxopen.weld.WeldJointBuilder.JointMidPointData
-
The primary body face normal in absolute coordinates at the joint mid point.
- primaryHiddenBySecondaryCFW() - Method in interface nxopen.drawings.ViewStyleSecondaryComponentsBuilder
-
Returns the visible and hidden lines color, font, and width of primary geometry that is hidden by secondary geometry.
- primaryLeadAngles() - Method in interface nxopen.cam.ToolAxisAdvanced
-
Returns the primary lead angles, used for leading to trailing and swarf blade
License requirements: None.
- primaryMaxDegree() - Method in interface nxopen.SurfaceRebuildData
-
Returns
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- primaryMaxSegments() - Method in interface nxopen.SurfaceRebuildData
-
Returns
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- primaryObject() - Method in interface nxopen.SketchMakeSymmetricBuilder
-
Returns the function returns the primary object of a symmetric constraint.
- primaryOffsetGeometry() - Method in interface nxopen.cam.InspectionAlignmentAssistantBuilder
-
Returns the primary offset geometry
License requirements: None.
- primaryOnReference() - Method in interface nxopen.features.shipdesign.PlateSystemBuilder
-
Returns the primary stiffener direction when the plate system is located on a midship reference.
- primaryParamFile() - Method in interface nxopen.motion.TirePropertyCdBuilder
-
Returns the primary parameter file.The tire parameter file describes the properties of the tire.
- primaryRebuildType() - Method in interface nxopen.SurfaceRebuildData
-
Returns
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- primarySelection() - Method in interface nxopen.cam.InspectionAlignmentAssistantBuilder
-
Returns the primary selection
License requirements: None.
- primaryStandardAngle() - Method in interface nxopen.formboard.FormboardLayoutBuilder
-
Returns the primary standard angle.
- primaryState() - Method in interface nxopen.cam.InspectionAlignmentAssistantBuilder
-
Returns the primary state
License requirements: None.
- primarySurfaceRebuildData() - Method in interface nxopen.features.ThroughCurveMeshBuilder
-
Returns the primary surface rebuild data,
Rebuild
.
- primaryTemplateString() - Method in interface nxopen.features.ThroughCurveMeshBuilder
-
Returns the primary template curve.
- primaryThicknessUser() - Method in interface nxopen.weld.EdgePrepValuesBuilder
-
Returns the user defined value for primary thickness
License requirements: None.
- primaryType() - Method in interface nxopen.cam.InspectionAlignmentAssistantBuilder
-
Returns the primary feature type
License requirements: None.
- primaryVar() - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
Returns the primary var name
License requirements: None.
- primaryVector() - Method in interface nxopen.cae.LaminateDrapingDataBuilder
-
Returns the primary alignment
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- primePoint() - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder
-
Returns the prime point representing the highest inboard point on the mirror, which defines the horizontal ray (in side view) parallel to vehicle centerline (in top view).
- PRIMITIVE - Static variable in class nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder.DirectionTypes
-
vector or plane
- PrimitiveMesh - Interface in nxopen.cae
-
Represents Primitive Mesh
To create or edit an instance of this class, use
PrimitiveMeshBuilder
Created in NX7.5.0
- PrimitiveMeshBuilder - Interface in nxopen.cae
-
- PrimitiveRecipeMesh - Interface in nxopen.cae
-
Represents a primitive recipe mesh.
- PrimitiveRecipeMeshBuilder - Interface in nxopen.cae
-
- PrimitiveRecipeMeshBuilder.Type - Class in nxopen.cae
-
Mesh primitive type
- primvalues - Variable in class nxopen.cae.ResultManager.IterationsWithLimitsData
-
primary independent domain variable values
- PRINCIPAL_AXIS - Static variable in class nxopen.cae.DurabilityStrainGageAnalyzerBuilder.AxisDirectionSearchMethodEnum
-
Principal Axis
- PRINCIPAL_AXIS - Static variable in class nxopen.cae.DurabilityStressAxesBuilder.StressAxisDirectionSearchMethodEnum
-
Principal Axis
- PRINCIPAL_AXIS - Static variable in class nxopen.weld.DatumCommonBuilder.ControlMethodTypes
-
A principal axis.
- PRINCIPAL_STRESS - Static variable in class nxopen.cae.Result.Quantity
-
- principalAngle - Variable in class nxopen.cae.BeamSection.Properties
-
Principal angle
- principalAxes() - Method in interface nxopen.features.SectionInertiaAnalysisBuilder
-
Returns the principal axes
License requirements: None.
- principalAxisStability() - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder
-
Returns the principal axis stability.
- principalAxisStability() - Method in interface nxopen.cae.DurabilityResultsReportBuilder
-
Returns the principal axis stability.
- principalAxisX() - Method in interface nxopen.weld.DatumCommonBuilder
-
Returns the principal axis x.
- principalAxisY() - Method in interface nxopen.weld.DatumCommonBuilder
-
Returns the principal axis y.
- principalAxisZ() - Method in interface nxopen.weld.DatumCommonBuilder
-
Returns the principal axis z.
- principalMomentInertiaYY - Variable in class nxopen.cae.BeamSection.Properties
-
Principal Moment of Inertia about y-axis
- principalMomentInertiaZZ - Variable in class nxopen.cae.BeamSection.Properties
-
Principal Moment of Inertia about z-axis
- principalMovementDirection() - Method in interface nxopen.features.StudioXformBuilderEx
-
Returns the principal movement direction
License requirements: None.
- principalRotatingAxis() - Method in interface nxopen.features.StudioXformBuilderEx
-
Returns the principal rotating axis
License requirements: None.
- principalScalingDirection() - Method in interface nxopen.features.StudioXformBuilderEx
-
Returns the principal scaling direction
License requirements: None.
- principalStrainAngle(double, double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the principal strain angle from the strain components at a
space point in the body.
- principalStrainMaximum(double, double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the maximum principal strain from the strain components at
a space point in the body.
- principalStrainMinimum(double, double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the minimum principal strain from the strain components at
a space point in the body.
- principalStressAngle(double, double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the principal stress angle from the stress components at a space
point in the body.
- principalStressMaximum(double, double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the maximum principal stress from the stress components at a space
point in the body.
- principalStressMinimum(double, double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the minimum principal stress from the stress components at a space
point in the body.
- PRINT - Static variable in class nxopen.cam.InspectionCmmCommandBuilder.DeviceTypeOptions
-
Use Print
- print() - Method in interface nxopen.cam.ProbeControlParametersBuilder
-
Returns the print option
License requirements: None.
- print() - Method in interface nxopen.INXObject
-
Prints a representation of this object to the system log file.
- print(Tag, UFPlot.JobOptions, String, UFPlot.BannerOptions, String, String, int) - Method in interface nxopen.uf.UFPlot
-
- print3D() - Method in interface nxopen.mfg.am.BuildTray
-
Prints the build tray
License requirements: am_pb_cam_basic ("Basic NX Powder Bed Additive Manufacturing Application")
.
- Print3dBuilder - Interface in nxopen
-
This class sends the 3d model for 3dprinting.
- Print3dBuilder.PrintInfillEnum - Class in nxopen
-
Sets the Infill type required for the 3d printing
- Print3dBuilder.PrintQualityEnum - Class in nxopen
-
Sets the print quality
- PRINT_OUT_TRACE_SERIAL_NUMBERS - Static variable in class nxopen.sim.SimDebugBuilder.UiType
-
Print Out Trace Serial Numbers
- PRINT_REASON - Static variable in class nxopen.uf.UFCgm.ExportReason
-
- printAdEvaluatorData() - Method in interface nxopen.ame.AmeDebugSession
-
Prints ad evaluator data
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- printAdExpressions() - Method in interface nxopen.ame.AmeDebugSession
-
Prints ad expression information
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- PrintBuilder - Interface in nxopen
-
- PrintBuilder.ImageResolutionOption - Class in nxopen
-
Specifies the print image resolution
- PrintBuilder.OrientationOption - Class in nxopen
-
Specifies the orientation of the printed sheet
- PrintBuilder.OutputOption - Class in nxopen
-
Specifies the output option when printing Current Display
- PrintBuilder.PaperSize - Class in nxopen
-
Specifies the paper size of the printed sheet
- printCabinetInformation() - Method in interface nxopen.ame.AmeDebugSession
-
Prints Cabinet Design information
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- printConnectionAnnotationSettings() - Method in interface nxopen.ame.AmeDebugSession
-
Prints connection annotation settings
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- printConnectionProperties() - Method in interface nxopen.ame.AmeDebugSession
-
Prints connection properties
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- printConnectionPropertiesSettings() - Method in interface nxopen.ame.AmeDebugSession
-
Prints connection properties settings
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- printEclassMappingInfo() - Method in interface nxopen.ame.AmeDebugSession
-
Prints eclass mappings
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- printEodefAttributesInformation() - Method in interface nxopen.ame.AmeDebugSession
-
Prints EODef Attributes information
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- printEplanProjectGenerationRequest() - Method in interface nxopen.ame.AmeDebugSession
-
Prints eplan project generation request
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- printEplanProjectSettings() - Method in interface nxopen.ame.AmeDebugSession
-
Prints sw code content
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- printEplanProjectTemplateData() - Method in interface nxopen.ame.AmeDebugSession
-
Prints eplan project template info
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- Printer - Interface in nxopen.mfg.am
-
Printer .
- printer - Variable in class nxopen.uf.UFPlot.AskDefaultPrinterAndProfileData
-
- PrinterGroup() - Constructor for class nxopen.uf.UFPlot.PrinterGroup
-
- PrinterGroup(String, String, String, String) - Constructor for class nxopen.uf.UFPlot.PrinterGroup
-
- printerGroups - Variable in class nxopen.uf.UFPlot.AskPrinterGroupsData
-
- printerGroupText() - Method in interface nxopen.PlotBuilder
-
Returns the printer group text.
- PrinterManager - Interface in nxopen.mfg.am
-
Represents the Additive Manufacturing Printer Service
Use the static method in this class to obtain an instance.
- PrinterManagerFactory - Class in nxopen.mfg.am
-
- PrinterManagerFactory() - Constructor for class nxopen.mfg.am.PrinterManagerFactory
-
- printers - Variable in class nxopen.uf.UFPlot.AskPrinterNamesData
-
- printerText() - Method in interface nxopen.Print3dBuilder
-
Returns the printer name
License requirements: None.
- printerText() - Method in interface nxopen.PrintBuilder
-
Returns the printer text.
- printFamilyTable() - Method in interface nxopen.PartFamilyManager
-
- printFile(String, String, String, int) - Method in interface nxopen.uf.UFPlot
-
- printFormsheetProperties() - Method in interface nxopen.ame.AmeDebugSession
-
Prints FormSheet properties
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- printGridSettings() - Method in interface nxopen.ame.AmeDebugSession
-
Prints grid settings
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- printHardwareInformation() - Method in interface nxopen.ame.AmeDebugSession
-
Prints hw specific information
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- printInformation() - Method in interface nxopen.cae.DataSource
-
Print information about the contents of this data source to the listing window.
- printInformation() - Method in interface nxopen.cae.PostScenarioDefinition
-
Print detailed information about this data definition to the listing window.
- PrintJob - Interface in nxopen.mfg.am
-
Print Job .
- printMemoryAreaInformation() - Method in interface nxopen.ame.AmeDebugSession
-
Prints Memory Area information
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- printNavigatorInformation() - Method in interface nxopen.ame.AmeDebugSession
-
Prints navigator infomation
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- printNavigatorInformation(AmeDebugSession.NavigatorType) - Method in interface nxopen.ame.AmeDebugSession
-
- printNavigatorNodeInformation(AmeDebugSession.NavigatorType) - Method in interface nxopen.ame.AmeDebugSession
-
- printObjectInformation(AmeDebugSession.ObjectType) - Method in interface nxopen.ame.AmeDebugSession
-
- printoutTags() - Method in interface nxopen.sim.SimDebugBuilder
-
Returns the printout tags type
License requirements: None.
- PrintPDFBuilder - Interface in nxopen
-
Represents a
PrintPDFBuilder
to be used when exporting the Current Display
or selected sheets to a PDF document.
- PrintPDFBuilder.ActionOption - Class in nxopen
-
Specifies the action option to be used when running Teamcenter
- PrintPDFBuilder.Color - Class in nxopen
-
Specifies the color option to use when creating the PDF document
- PrintPDFBuilder.ImageResolutionOption - Class in nxopen
-
Specifies the image resolution when exporting a raster image
- PrintPDFBuilder.OutputTextOption - Class in nxopen
-
Specifies the output text option, as either text or polylines
- PrintPDFBuilder.RelationOption - Class in nxopen
-
Specifies the relation to use when exporting a PDF to Teamcenter
- PrintPDFBuilder.SizeOption - Class in nxopen
-
Specifies the size option of the PDF document.
- PrintPDFBuilder.UnitsOption - Class in nxopen
-
Specifies which units are associated to the dimensions
- PrintPDFBuilder.Width - Class in nxopen
-
Specifies the primary selection of which type of width assignment to use.
- printPlotLayout(String, UFPlot.BannerOptions, String, String, int) - Method in interface nxopen.uf.UFPlot
-
- printPouContent() - Method in interface nxopen.ame.AmeDebugSession
-
Prints sw code content
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- printPouData() - Method in interface nxopen.ame.AmeDebugSession
-
Prints sw data model
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- printPouInformation() - Method in interface nxopen.ame.AmeDebugSession
-
Prints sw specific object information
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- printProductComponentsProperties() - Method in interface nxopen.ame.AmeDebugSession
-
Prints Product Component properties
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- printProductDefinitionProperties() - Method in interface nxopen.ame.AmeDebugSession
-
Prints Product Definition properties
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- printReport() - Method in interface nxopen.sim.ExportMachineKitBuilder
-
Returns the machine kit print report checkbox specify if a report will be plotted while create the kit or not.
- printReport() - Method in interface nxopen.sim.ImportMachineKitBuilder
-
Returns the machine print report flat that specifies if a report will be plotted while import the machine or not.
- printSchematicSymbolAssignmentToTypeInfo() - Method in interface nxopen.ame.AmeDebugSession
-
Prints schematic symbol assignment information
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- printSchematicSymbolProperties() - Method in interface nxopen.ame.AmeDebugSession
-
Prints schematic symbol information
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- printSoftwareInformation() - Method in interface nxopen.ame.AmeDebugSession
-
Prints sw specific information
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- printStationsInformation() - Method in interface nxopen.ame.AmeDebugSession
-
Prints Stations information
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- printSyslog(String, boolean) - Method in interface nxopen.uf.UF
-
- printTestData(String) - Method in interface nxopen.TaggedObject
-
- printTestData(String, int) - Method in interface nxopen.TaggedObject
-
- printTestData(String) - Method in interface nxopen.TransientObject
-
- printTestData(String, int) - Method in interface nxopen.TransientObject
-
- printWindowUgImage(int, int) - Method in interface nxopen.uf.UFDisp
-
- priority() - Method in interface nxopen.drawings.DrawingRegionBuilder
-
Returns the priority
License requirements: None.
- priority() - Method in interface nxopen.issue.IssueContent
-
Returns the issue priority
License requirements: nx_issue_mgmt ("NX Issue Tracking")
.
- priority() - Method in interface nxopen.issue.IssueContentBuilder
-
Returns the issue priority
License requirements: nx_issue_mgmt ("NX Issue Tracking")
.
- priorityLevel() - Method in interface nxopen.cae.CfdAutoRefinementConstraintBuilder
-
Returns the priority level
License requirements: None.
- priorityLevel() - Method in interface nxopen.cae.CfdContactPreventionConstraintBuilder
-
Returns the priority level
License requirements: None.
- priorityLevel() - Method in interface nxopen.cae.CfdLocalResolutionConstraintBuilder
-
Returns the priority level
License requirements: None.
- priXorigin() - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
Returns the pri xorigin
License requirements: None.
- priYorigin() - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
Returns the pri yorigin
License requirements: None.
- priZorigin() - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
Returns the pri zorigin
License requirements: None.
- PRJ_DB - Static variable in class nxopen.tooling.SpecialFormingBuilder.ParentValue
-
- PRJ_DB000 - Static variable in class nxopen.tooling.PiercingInsertBuilder.NormalUdpparentPartType
-
Parent part is db
- PRJ_DIE - Static variable in class nxopen.tooling.SpecialFormingBuilder.ParentValue
-
- PRJ_DIE099 - Static variable in class nxopen.tooling.PiercingInsertBuilder.NormalUdpparentPartType
-
Parent part is die
- PRJ_SUB - Static variable in class nxopen.tooling.SpecialFormingBuilder.ParentValue
-
- PRJ_SUB002 - Static variable in class nxopen.tooling.PiercingInsertBuilder.NormalUdpparentPartType
-
Parent part is sub
- PrlResultsEvaluationSetting - Interface in nxopen.cae.responsesimulation
-
Represents the abstract class of evaluation setting for peak value, RMS results
and LCR results.
- PrlResultsEvaluationSettingBuilder - Interface in nxopen.cae.responsesimulation
-
Represents the abstract builder class of evaluation setting for peak value, RMS results
and LCR results.
- PROBABILITY_OF_FAILURE - Static variable in class nxopen.cae.DurabilityDamageEvaluationBuilder.ProbabilityOptionEnum
-
Prob.
- PROBABILITY_OF_FAILURE - Static variable in class nxopen.cae.DurabilityEventFatigueSettingsBuilder.ProbabilityOptionEnum
-
Probability Of Failure
- probabilityOfFailure() - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder
-
Returns the probability of failure.
- probabilityOption() - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder
-
Returns the probability distribution.
- PROBE - Static variable in class nxopen.cam.Tool.Subtypes
-
Probe
- ProbeCalibrateLengthMoveBuilder - Interface in nxopen.cam
-
- ProbeCalibrateSphereMoveBuilder - Interface in nxopen.cam
-
- ProbeCalibrateSphereMoveBuilder.Geometry - Class in nxopen.cam
-
the geometry types
- ProbeCalibrateStylusMoveBuilder - Interface in nxopen.cam
-
- ProbeCalibrateStylusMoveBuilder.CalibrateStylusType - Class in nxopen.cam
-
the stylus calibration types
- ProbeCalibrateStylusMoveBuilder.Depth - Class in nxopen.cam
-
the depth types
- ProbeCalibrateStylusMoveBuilder.Geometry - Class in nxopen.cam
-
the geometry types
- ProbeClearanceMoveBuilder - Interface in nxopen.cam
-
- probeControlParameters() - Method in interface nxopen.cam.ProbeInspectBorebossMoveBuilder
-
Returns the probe control parameters builder
License requirements: None.
- probeControlParameters() - Method in interface nxopen.cam.ProbeInspectPointMoveBuilder
-
Returns the probe control parameters builder
License requirements: None.
- probeControlParameters() - Method in interface nxopen.cam.ProbeInspectSurfacePointMoveBuilder
-
Returns the probe control parameters builder
License requirements: None.
- probeControlParameters() - Method in interface nxopen.cam.ProbeParamsBuilder
-
Returns the probe control parameters builder
License requirements: None.
- probeControlParameters() - Method in interface nxopen.cam.TurnProbeInspectPointMoveBuilder
-
Returns the probe control parameters builder
License requirements: None.
- ProbeControlParametersBuilder - Interface in nxopen.cam
-
- ProbeControlParametersBuilder.AdjustmentTypes - Class in nxopen.cam
-
the output adjustment method types
- ProbeControlParametersBuilder.PrintType - Class in nxopen.cam
-
the print type flag
- ProbeInspectBorebossMoveBuilder - Interface in nxopen.cam
-
- ProbeInspectBorebossMoveBuilder.Angle - Class in nxopen.cam
-
the angle type
- ProbeInspectBorebossMoveBuilder.Cycle - Class in nxopen.cam
-
the cycle type
- ProbeInspectBorebossMoveBuilder.Depth - Class in nxopen.cam
-
the depth type
- ProbeInspectBorebossMoveBuilder.Geometry - Class in nxopen.cam
-
the geometry type
- ProbeInspectPointMoveBuilder - Interface in nxopen.cam
-
- ProbeInspectPointMoveBuilder.Direction - Class in nxopen.cam
-
the probing direction type
- ProbeInspectSurfacePointMoveBuilder - Interface in nxopen.cam
-
- ProbeInspectSurfacePointMoveBuilder.Direction - Class in nxopen.cam
-
the probing direction type
- ProbeInspectSurfacePointMoveBuilder.Measurement - Class in nxopen.cam
-
the measurement type
- ProbeInspectSurfacePointMoveBuilder.ToolAxis - Class in nxopen.cam
-
the probing tool axis type
- probeName() - Method in interface nxopen.cae.ResultProbeBuilder
-
Returns the probe name
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- ProbeOutputControl - Interface in nxopen.cam
-
- probeOutputControl() - Method in interface nxopen.cam.ProbeParamsBuilder
-
Returns the probe output control
License requirements: None.
- ProbeOutputControl.OutputType - Class in nxopen.cam
-
the output method types
- probeParamsBuilder() - Method in interface nxopen.cam.GmcOpBuilder
-
Returns the probe parameter builder
License requirements: None.
- probeParamsBuilder() - Method in interface nxopen.cam.MillToolProbingBuilder
-
Returns the probe parameter builder
License requirements: None.
- ProbeParamsBuilder - Interface in nxopen.cam
-
Represents the Probe Params Builder
This builder cannot be instantiated separately.
- probeParamsBuilder() - Method in interface nxopen.cam.TurnPartProbingBuilder
-
Returns the probe parameter builder
License requirements: None.
- probeParamsBuilder() - Method in interface nxopen.cam.TurnToolProbingBuilder
-
Returns the probe parameter builder
License requirements: None.
- probeProtectedParameters() - Method in interface nxopen.cam.ProbeCalibrateLengthMoveBuilder
-
Returns the probe protected parameters builder
License requirements: None.
- probeProtectedParameters() - Method in interface nxopen.cam.ProbeCalibrateSphereMoveBuilder
-
Returns the probe protected parameters builder
License requirements: None.
- probeProtectedParameters() - Method in interface nxopen.cam.ProbeCalibrateStylusMoveBuilder
-
Returns the probe protected parameters builder
License requirements: None.
- probeProtectedParameters() - Method in interface nxopen.cam.ProbeInspectBorebossMoveBuilder
-
Returns the probe protected parameters builder
License requirements: None.
- probeProtectedParameters() - Method in interface nxopen.cam.ProbeInspectPointMoveBuilder
-
Returns the probe protected parameters builder
License requirements: None.
- probeProtectedParameters() - Method in interface nxopen.cam.ProbeInspectSurfacePointMoveBuilder
-
Returns the probe protected parameters builder
License requirements: None.
- probeProtectedParameters() - Method in interface nxopen.cam.ProbeParamsBuilder
-
Returns the probe protected parameters builder
License requirements: None.
- probeProtectedParameters() - Method in interface nxopen.cam.TurnProbeInspectPointMoveBuilder
-
Returns the probe protected parameters builder
License requirements: None.
- ProbeProtectedParametersBuilder - Interface in nxopen.cam
-
Represents the Probe Protected Parameters Builder .
- ProbeProtectedParametersBuilder.AppMethodTypes - Class in nxopen.cam
-
the approach types
- ProbeProtectedParametersBuilder.CollisionFlagTypes - Class in nxopen.cam
-
the collision flag types
- ProbeProtectedParametersBuilder.DepMethodTypes - Class in nxopen.cam
-
the departure types
- probeRotationsAtSafePlane() - Method in interface nxopen.cam.InspectionCollisionAvoidanceBuilder
-
Returns a flag to indicate whether to do probe rotations at safe plane
License requirements: None.
- probeStockParameters() - Method in interface nxopen.cam.ProbeInspectBorebossMoveBuilder
-
Returns the probe stock parameters builder
License requirements: None.
- probeStockParameters() - Method in interface nxopen.cam.ProbeInspectPointMoveBuilder
-
Returns the probe stock parameters builder
License requirements: None.
- probeStockParameters() - Method in interface nxopen.cam.ProbeInspectSurfacePointMoveBuilder
-
Returns the probe stock parameters builder
License requirements: None.
- probeStockParameters() - Method in interface nxopen.cam.ProbeParamsBuilder
-
Returns the probe stock parameters builder
License requirements: None.
- probeStockParameters() - Method in interface nxopen.cam.TurnProbeInspectPointMoveBuilder
-
Returns the probe stock parameters builder
License requirements: None.
- ProbeStockParametersBuilder - Interface in nxopen.cam
-
Represents the Probe Stock Parameters Builder .
- probeTipType() - Method in interface nxopen.cam.InspectionCreatePathsBuilder
-
Returns the preferred probe tip type
License requirements: None.
- probeTipType() - Method in interface nxopen.cam.InspectionLinkPmiBuilder
-
Returns the preferred probe tip type
License requirements: None.
- probeTipType() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns the preferred probe tip type
License requirements: None.
- probeTipType() - Method in interface nxopen.cam.InspectionMoveBuilder
-
Returns the preferred probe tip type
License requirements: None.
- probeTipTypeBuilder() - Method in interface nxopen.cam.InspectionMoveBuilder
-
Returns the Probe Tip Type Builder
License requirements: None.
- probeToleranceParameters() - Method in interface nxopen.cam.ProbeInspectBorebossMoveBuilder
-
Returns the probe tolerance parameters builder
License requirements: None.
- probeToleranceParameters() - Method in interface nxopen.cam.ProbeInspectPointMoveBuilder
-
Returns the probe tolerance parameters builder
License requirements: None.
- probeToleranceParameters() - Method in interface nxopen.cam.ProbeInspectSurfacePointMoveBuilder
-
Returns the probe tolerance parameters builder
License requirements: None.
- probeToleranceParameters() - Method in interface nxopen.cam.ProbeParamsBuilder
-
Returns the probe tolerance parameters builder
License requirements: None.
- probeToleranceParameters() - Method in interface nxopen.cam.TurnProbeInspectPointMoveBuilder
-
Returns the probe tolerance parameters builder
License requirements: None.
- ProbeToleranceParametersBuilder - Interface in nxopen.cam
-
- ProbeToolBuilder - Interface in nxopen.cam
-
- ProbeTrackingBuilder - Interface in nxopen.cam
-
- ProbeTrackPoint - Interface in nxopen.cam
-
Represents an Track Point
To obtain an instance of this class us
TrackPointCollection
Created in NX4.0.0
- PROBING_INVALID_NX_VERSION - Static variable in class nxopen.cam.CAMObject.Attr
-
- PROBING_TEXT - Static variable in class nxopen.cae.xyplot.TextType
-
Probing label
- ProbingStyle - Interface in nxopen.cae.xyplot
-
Manages the probing display styles.
- probingStyle() - Method in interface nxopen.cae.xyplot.WallDisplayStyles
-
Returns the probing display style
License requirements: None.
- PROBLEM - Static variable in class nxopen.issue.SnapshotSubsetBuilder.ContextType
-
Problem Subset
- PROBLEM_ITEMS - Static variable in class nxopen.issue.IssueFolder.Type
-
Problem items type
- problemAbstraction - Variable in class nxopen.uf.UFSf.AskLanguageData
-
- problemSubset() - Method in interface nxopen.issue.SnapshotWorksetBuilder
-
Returns the problemSubset containing the problem parts.
- procAng - Variable in class nxopen.uf.UFSmd.PipNodeData
-
- PROCESS - Static variable in class nxopen.annotations.PmiFilterByType.Type
-
Indicates a PMI process type
- process() - Method in interface nxopen.cae.DataProcessing
-
Processes the DPM
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- process() - Method in interface nxopen.cae.DataProcessingBlock
-
Processes the Block
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- process() - Method in interface nxopen.features.ColorFeatureGroupBuilder
-
Returns the property to set color for new features only or set color and apply to all members
License requirements: None.
- PROCESS_FAILURE - Static variable in class nxopen.uf.UFConstants
-
- PROCESS_RUN - Static variable in class nxopen.linedesigner.ConveyorStationFeatureBuilder.Type
-
- PROCESS_SPECIFICATION - Static variable in class nxopen.annotations.PmiPreferences.PreferenceSymbolTypes
-
process specification
- PROCESS_SPECIFICATION_TYPE - Static variable in class nxopen.uf.UFPd.AttributeType
-
- PROCESS_STOP - Static variable in class nxopen.linedesigner.ConveyorStationFeatureBuilder.Type
-
- processActiveHood() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the setting to indicate if the active hood should be analyzed,
true it will be used, false it will not be used
License requirements: None.
- processAid() - Method in interface nxopen.UFSession
-
- processAngle - Variable in class nxopen.uf.UFSmd.SeqInput
-
- processAngle - Variable in class nxopen.uf.UFSmd.SeqOutput
-
- processBinder() - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder
-
Returns the value of binder process.
- processBinderOption() - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder
-
Returns the option of binder process.
- processBinderType() - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder
-
Returns the type of binder process.
- processBoundingObjects() - Method in interface nxopen.features.TrimCurve2Builder
-
Returns the process bounding objects option
License requirements: None.
- processBuiltInPaths(Component) - Method in interface nxopen.routing.SegmentManager
-
- processCompatibilityPostPlaceParts() - Method in interface nxopen.mechanicalrouting.PartPlacementBuilder
-
Process the compatibility post placement parts (ex. placement of gasket flange after the post placement of flange and do geoemtry operations like split stock, etc).
- processComponentsForEdit() - Method in interface nxopen.mechanicalrouting.PartPlacementBuilder
-
Processes the
Component
s to edit their placement
License requirements: routing_base ("Routing Basic")
Created in NX12.0.0
- processCoplanar() - Method in interface nxopen.features.shipdesign.CuttingSideFacesBuilder
-
Returns the option identifying if a coplanar rule should be applied to find cutting side faces.
- processDeletePartModule() - Method in interface nxopen.features.PartModule
-
Process the deletion of a Part Module
License requirements: usr_defined_features ("USER DEFINED FEATURES")
.
- processDie() - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder
-
Returns the value of die process.
- processDieOption() - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder
-
Returns the option of die process.
- processDieType() - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder
-
Returns the type of die process.
- processFace() - Method in interface nxopen.tooling.ForceCalculationBuilder
-
Returns the face of the process.
- processFaceSplit() - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
Action button for invoking the Split Face command on the Face Tab page.
- processFactor - Variable in class nxopen.uf.UFModl.StateInfo
-
- processFive() - Method in interface nxopen.tooling.ScrapDesignBuilder
-
Returns the process five
License requirements: None.
- processForce() - Method in interface nxopen.tooling.ForceCalculationBuilder
-
Returns the process force of the calculated result.
- processForMultipleObjectsSettings(BaseEditSettingsBuilder[]) - Method in interface nxopen.drafting.SettingsManager
-
Process edit settings builders for multiple objects
User must call this API for multiple object settings and pass all edit settings builders for selected objects
License requirements: drafting ("DRAFTING")
.
- processForMutipleObjectsSettings(BaseEditSettingsBuilder[]) - Method in interface nxopen.drafting.SettingsManager
-
- processFour() - Method in interface nxopen.tooling.ScrapDesignBuilder
-
Returns the process four
License requirements: None.
- processFromSpindleLines() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
Read the spindle data and write the data into the motion file.
- processHoldFlag() - Method in interface nxopen.DexBuilder
-
Returns the process hold flag - set to true if user wants to wait until transaltion process gets completed
License requirements: None.
- processingOrder() - Method in interface nxopen.DxfdwgImporter
-
Returns the ProcessingOrder command - this option will decide processing order of AutoCAD layers
License requirements: None.
- processInheritFeatureParameters(StyledBlend) - Method in interface nxopen.features.StyledBlendBuilder
-
Internally data processing of inherited parameters from other Styled Blend feature
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- processMcdSimulationData(double, double) - Method in interface nxopen.tooling.SIZERExportBuilder
-
Processes the simulation data in MCD mode.
- processName() - Method in interface nxopen.tooling.ForceCalculationBuilder
-
Returns the process name.
- processName - Variable in class nxopen.uf.UFSmd.FormOutput
-
- processName - Variable in class nxopen.uf.UFSmd.SeqInput
-
- processName - Variable in class nxopen.uf.UFSmd.SeqOutput
-
- processObjectsHidden() - Method in interface nxopen.drawings.AnnotationSettingsBuilder
-
Returns the process objects hidden
License requirements: None.
- processOne() - Method in interface nxopen.tooling.ScrapDesignBuilder
-
Returns the process one
License requirements: None.
- processPlacedPart() - Method in interface nxopen.mechanicalrouting.PartPlacementBuilder
-
Processes the placed part.
- ProcessPlan - Interface in nxopen.mfg.mlp
-
Represents a Machining Line Planner process plan
To obtain an instance of this class use
MachiningLinePlanner
Created in NX11.0.1
- processPostPlaceParts() - Method in interface nxopen.mechanicalrouting.PartPlacementBuilder
-
Process the post placement parts (ex. placement of flange after the valve and do geoemtry operations like split stock, etc).
- processPrimaryHiddenBySecondary() - Method in interface nxopen.drawings.ViewStyleSecondaryComponentsBuilder
-
Returns the Primary Geometry Hidden by Secondary Geometry toggle on Secondary Geometry tab of View Style Dialog.
- processPunch() - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder
-
Returns the value of punch process.
- processPunchOption() - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder
-
Returns the option of punch process.
- processPunchType() - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder
-
Returns the type of punch process.
- processSecondaryComponents() - Method in interface nxopen.drawings.ViewStyleSecondaryComponentsBuilder
-
Returns the Secondary Geometry toggle on Secondary Geometry tab of View Style Dialog.
- processSecondaryHiddenByPrimary() - Method in interface nxopen.drawings.ViewStyleSecondaryComponentsBuilder
-
Returns the Secondary Geometry Hidden by Primary Geometry toggle on Secondary Geometry tab of View Style Dialog.
- ProcessSetup - Interface in nxopen.mfg.mlp
-
Represents a Machining Line Planner process setup
To obtain an instance of this class use GetSetup of Operation, Workpiece or ToolSet or GetSetups on ProcessPlan or Line.
- processSketchCurves() - Method in interface nxopen.drawings.ViewCopyTo3dBuilder
-
- ProcessSpecification - Interface in nxopen.annotations
-
- ProcessSpecificationBuilder - Interface in nxopen.annotations
-
- processTangent() - Method in interface nxopen.features.shipdesign.CuttingSideFacesBuilder
-
Returns the option identifying if a tangent rule should be applied to find adjacent cutting side faces.
- processThree() - Method in interface nxopen.tooling.ScrapDesignBuilder
-
Returns the process three
License requirements: None.
- processTime() - Method in interface nxopen.linedesigner.ConveyorStationFeatureBuilder
-
Returns the Process time
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- processTwo() - Method in interface nxopen.tooling.ScrapDesignBuilder
-
Returns the process two
License requirements: None.
- processType() - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
Returns the process type for onestep unform.
- processType() - Method in interface nxopen.cam.LaserControlPoint
-
Returns the Point Process Type
License requirements: None.
- processType() - Method in interface nxopen.tooling.ForceCalculationBuilder
-
Returns the process type.
- processType - Variable in class nxopen.uf.UFSmd.FormOutput
-
- processType - Variable in class nxopen.uf.UFSmd.SeqInput
-
- processTypeOption() - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder
-
Returns the process type.
- processViewCurves() - Method in interface nxopen.drawings.ViewCopyTo3dBuilder
-
- PROD - Static variable in class nxopen.cae.ModelUpdateDesignVariablesRapidCreateBuilder.PhysicalTypesEnum
-
- prod() - Method in interface nxopen.tooling.MoldCsysBuilder
-
Returns the selected faces are used to create a bounding box whose center
will be the new origin of WCS
License requirements: None.
- PROD_PART - Static variable in class nxopen.tooling.SubInsertBuilder.Types
-
The parent part is Prod part
- prodIntItem - Variable in class nxopen.assemblies.productinterface.ObjectBuilder.AddProductInterfaceData
-
the product interface object created or modified
- PRODUCT - Static variable in class nxopen.ame.AmeDebugSession.NavigatorType
-
Product Aspect Navigator
- product() - Method in interface nxopen.ame.AspectPrefixBuilder
-
Returns the aspect prefix of product aspect
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- PRODUCT - Static variable in class nxopen.ame.BaseEvaluatorBuilder.ContextType
-
- PRODUCT - Static variable in class nxopen.ame.db.DocumentStructure.Attribute
-
- product() - Method in interface nxopen.ame.DefineAspectBuilder
-
Returns the value for Function Aspect
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- product() - Method in interface nxopen.die.AddendumSectionBuilder
-
Returns the product faces.
- PRODUCT - Static variable in class nxopen.die.PierceTaskBuilder.CenterPointOptionTypes
-
Center points output in product position
- Product - Interface in nxopen.mfg.mlp
-
Represents a Machining Line Planner product
To obtain an instance of this class use GetProducts of ProcessPlan.
- product() - Method in interface nxopen.tooling.DieDesignTrimPostBuilder
-
Returns the product selection
License requirements: ug_die_design ("Die Design")
.
- product() - Method in interface nxopen.tooling.DieEngDieTipBuilder
-
Returns the die tip product sheet body
License requirements: die_engineering ("DIE ENGINEERING")
.
- product() - Method in interface nxopen.tooling.DieEngLineupBuilder
-
Returns the lineup product sheet body
License requirements: die_engineering ("DIE ENGINEERING")
.
- product() - Method in interface nxopen.tooling.SolidPatchBuilder
-
Returns the product body selected as the target body for unite with tool bodies.
- PRODUCT - Static variable in class nxopen.tooling.TrimMoldComponentsBuilder.TargetScope
-
Select target bodies in product node part
- product - Variable in class nxopen.uf.UFUgmgr.VariantConfiguration
-
- PRODUCT2DSYMBOL_MULTILINE_NODE - Static variable in class nxopen.ame.OrderAspectsBuilder.OrderType
-
- PRODUCT2DSYMBOL_SINGLELINE_NODE - Static variable in class nxopen.ame.OrderAspectsBuilder.OrderType
-
- PRODUCT3DMODEL_NODE - Static variable in class nxopen.ame.OrderAspectsBuilder.OrderType
-
- PRODUCT_BODY_CENTER - Static variable in class nxopen.tooling.MoldCsysBuilder.Wcsposition
-
product body center position
- PRODUCT_COMPONENT - Static variable in class nxopen.ame.OrderAspectsBuilder.OrderType
-
- PRODUCT_COMPONENT_CORE - Static variable in class nxopen.ame.OrderAspectsBuilder.OrderType
-
- PRODUCT_CONTACT - Static variable in class nxopen.die.FillAreaBuilder.Types
-
Fill area is in the upper deck where relief for the product has been added.
- PRODUCT_DEFINITION_INSTANCE_COMBINED - Static variable in class nxopen.uf.UFPd.ProductDefinitionInstanceType
-
- PRODUCT_DEFINITION_INSTANCE_USER_DEFINED - Static variable in class nxopen.uf.UFPd.ProductDefinitionInstanceType
-
- PRODUCT_MEMORY_AREA - Static variable in class nxopen.ame.OrderAspectsBuilder.OrderType
-
- PRODUCT_STRUCTURE - Static variable in class nxopen.ame.AmeDebugSession.NavigatorType
-
Product Structure Navigator
- PRODUCT_TEMPLATE_LINK_NODE - Static variable in class nxopen.ame.OrderAspectsBuilder.OrderType
-
- PRODUCT_TEMPLATE_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
-
Product Template
- PRODUCT_WORK_PIECE - Static variable in class nxopen.tooling.WorkpieceBuilder.Types
-
The old assembly of Mold wizard
- productAspect() - Method in interface nxopen.ame.ReportsSettingsBuilder
-
Returns the product aspect
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- ProductAttribute() - Constructor for class nxopen.uf.UFGdt.ProductAttribute
-
- ProductAttribute(int, UFPd.ProductAttribute) - Constructor for class nxopen.uf.UFGdt.ProductAttribute
-
- ProductAttribute() - Constructor for class nxopen.uf.UFPd.ProductAttribute
-
- ProductAttribute(UFPd.AttributeType, String, String, String, String, String, int, UFPd.BusinessModifier[], UFPd.AttributeValue[], int, UFPd.AttributeValueData[], int) - Constructor for class nxopen.uf.UFPd.ProductAttribute
-
- ProductAttribute2() - Constructor for class nxopen.uf.UFPd.ProductAttribute2
-
- ProductAttribute2(UFPd.AttributeType, String, String, String, String, String, int, UFPd.BusinessModifier[], UFPd.AttributeValue[], int, UFPd.AttributeValueData2[], int) - Constructor for class nxopen.uf.UFPd.ProductAttribute2
-
- productAttributes - Variable in class nxopen.uf.UFPd.ProductDefinition
-
- productAttributess - Variable in class nxopen.uf.UFPd.AskProductAttribuesData
-
- productAttributess - Variable in class nxopen.uf.UFPd.AskProductAttributesData
-
- productAtts - Variable in class nxopen.uf.UFGdt.AskProductAttributesData
-
- productBody() - Method in interface nxopen.tooling.FlowAnalysisBuilder
-
Returns the product body
License requirements: None.
- ProductComponent - Interface in nxopen.ame
-
Product Component class
This object does not need a creator.
- ProductComponentInstance - Interface in nxopen.ame
-
Product Component Instance class
This object does not need a creator.
- productContactRelief() - Method in interface nxopen.die.SteelInsertSectionBuilder
-
Returns the product contact relief of the steel insert casting
License requirements: ug_die_design ("Die Design")
.
- productContactWidth() - Method in interface nxopen.die.SteelInsertSectionBuilder
-
Returns the product contact width of the steel insert casting
License requirements: ug_die_design ("Die Design")
.
- productCSYS() - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder
-
Returns the product csys
License requirements: die_engineering ("DIE ENGINEERING")
.
- productData() - Method in interface nxopen.ObjectTypeSelector
-
Returns the product data - This should be set to true if product data are desired in the output file
License requirements: None.
- ProductDefAttributeHolder - Interface in nxopen.ame
-
ProductDefinition Atributes Holder Object
This does not need a creator.
- productDefAttributeHolder() - Method in interface nxopen.ame.ProjectEngineeringObjectBuilder
-
Returns the Product definition attribute holder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- ProductDefinition - Interface in nxopen.ame
-
JA class for the Product Definition object
This is an abstract class, and cannot be instantiated.
- ProductDefinition() - Constructor for class nxopen.uf.UFPd.ProductDefinition
-
- ProductDefinition(String, Tag[], int, boolean, UFPd.ProductAttribute[], int) - Constructor for class nxopen.uf.UFPd.ProductDefinition
-
- ProductDefinitionRoot - Interface in nxopen.ame
-
Product Definition Root class
This object does not need a creator.
- productDefinitions - Variable in class nxopen.uf.UFPd.AskProductDefinitionsData
-
- productDefinitions - Variable in class nxopen.uf.UFPd.AskProductDefinitionsOfGeometryData
-
- productDesignation() - Method in interface nxopen.ame.DefineAspectBuilder
-
Returns the value for Function Aspect
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- productFacets() - Method in interface nxopen.die.SpringbackCompensationBuilder
-
Returns the product facets.
- productInterface() - Method in interface nxopen.Part
-
Returns the ProductInterface Collection .
- productInterfaceDelay() - Method in interface nxopen.Update
-
Returns the delay status for product interface delays
License requirements: None.
- productInterfaceEmphasis() - Method in interface nxopen.preferences.SessionVisualizationEmphasis
-
Returns the setting that controls whether or not Product Interface objects
are emphasized.
- productInterfaceEmphasize() - Method in interface nxopen.preferences.SessionAssemblies
-
- productInterfaces() - Method in interface nxopen.pdm.PartOperationImportBuilder
-
- productionProcessText() - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder
-
Returns the production process text
License requirements: None.
- productionProcessType() - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder
-
Returns the production process enum
License requirements: None.
- ProductionUnitCreatorBuilder - Interface in nxopen.linedesigner
-
To create a new instance of this class, use nxopen.linedesigner.LineDesignerManager#createProductionUnitCreatorBuilder
Created in NX10.0.0
- productionUnitId() - Method in interface nxopen.linedesigner.PlantProductionUnitCreatorBuilder
-
Returns the production unit id
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- productionUnitId() - Method in interface nxopen.linedesigner.ProductionUnitCreatorBuilder
-
Returns the production unit id
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- productionUnitName() - Method in interface nxopen.linedesigner.PlantProductionUnitCreatorBuilder
-
Returns the production unit name
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- productionUnitName() - Method in interface nxopen.linedesigner.ProductionUnitCreatorBuilder
-
Returns the production unit name
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- productionUnitTypeString() - Method in interface nxopen.linedesigner.PlantProductionUnitCreatorBuilder
-
Returns the type of a production unit
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- productionUnitTypeString() - Method in interface nxopen.linedesigner.ProductionUnitCreatorBuilder
-
Returns the type of a production unit
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- ProductMatchingRulesBuilder - Interface in nxopen.ame
-
- ProductMatchingRulesBuilder.Condition - Class in nxopen.ame
-
Represents matching rule condition
- ProductOutlineBuilder - Interface in nxopen.assemblies
-
- ProductOutlineBuilder.LineFont - Class in nxopen.assemblies
-
Represents the line font types
- ProductOutlineManager - Interface in nxopen.assemblies
-
Represents a collection of assemblies.
- productPointsFile() - Method in interface nxopen.die.SpringbackCompensationBuilder
-
Returns the product points file name.
- products - Variable in class nxopen.uf.UFUgmgr.AskProductAssembliesData
-
- productSelection() - Method in interface nxopen.tooldesigner.AssociateDatumsUnitDesignsBuilder
-
Returns the product selection
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- productSelection() - Method in interface nxopen.tooldesigner.SelectDatumsBuilder
-
Returns the product selection
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- ProductSelectionBuilder - Interface in nxopen.ame
-
- ProductSelectionBuilder.Type - Class in nxopen.ame
-
the product type for product selection
- ProductSelectionDetailsBuilder - Interface in nxopen.ame
-
- productSheet() - Method in interface nxopen.die.SpringbackCompensationBuilder
-
Returns the sheet body representing the product shape.
- productsOfInertia - Variable in class nxopen.uf.UFMotion.LinkMassProperties
-
- productsOfInertia - Variable in class nxopen.uf.UFWeight.Properties
-
- productType() - Method in interface nxopen.ame.ProductSelectionBuilder
-
Returns the product type for product selection
License requirements: None.
- ProeImporter - Interface in nxopen
-
- ProeImporter.ImportToOption - Class in nxopen
-
Import To Option
- PROFIBUS_DP - Static variable in class nxopen.ame.BusInterfaceType
-
- PROFILE - Static variable in class nxopen.cam.CutPatternBuilder.Types
-
Profile
- PROFILE - Static variable in class nxopen.cam.DmAmBuilder.AmCutPatternTypes
-
Profile
- PROFILE - Static variable in class nxopen.cam.DmBndBuilder.BndCutPatternTypes
-
Profile
- PROFILE - Static variable in class nxopen.drawings.ShipbuildingLinesViewStyle.ShipbuildingLines
-
Profile
- profile() - Method in interface nxopen.facet.ExtrudeProfileBuilder
-
Returns the 3D profile to be extruded
License requirements: None.
- profile() - Method in interface nxopen.features.RibbonBuilder
-
Returns the profile to offset
License requirements: None.
- PROFILE - Static variable in class nxopen.features.shipdesign.PillarBuilder.StockSectionType
-
Profile Stock
- PROFILE - Static variable in class nxopen.features.shipdesign.PillarSystemBuilder.StockSectionType
-
Profile Stock
- Profile - Interface in nxopen.features.shipdesign
-
Represents a profile feature
To create or edit an instance of this class, use
ProfileBuilder
Created in NX7.5.0
- PROFILE - Static variable in class nxopen.features.shipdesign.ProfileBuilder.SectionOption
-
- PROFILE - Static variable in class nxopen.features.shipdesign.ProfileBuilder.TypeOption
-
- PROFILE - Static variable in class nxopen.features.shipdesign.ShipnamesBuilderType
-
- PROFILE - Static variable in class nxopen.features.shipdesign.StiffenerStockBuilder.StockSectionType
-
Profile Stock
- PROFILE - Static variable in class nxopen.features.shipdesign.SubSystemsBuilder.Types
-
Profile system, any system using stiffener stock.
- PROFILE - Static variable in class nxopen.features.shipdesign.UpdateShipLibraryBuilder.ShipLibOptionType
-
- PROFILE - Static variable in class nxopen.features.StyledBlendBuilder.Types
-
Profile type
- PROFILE - Static variable in class nxopen.MeshProfileString.Type
-
- Profile - Interface in nxopen.mfg.am
-
Interface for Services Profile objects
To obtain an instance of this class use
ProfileLibrary
.
- profile() - Method in interface nxopen.motion.AnalyticalContactBuilder
-
Returns the profile
License requirements: mechanisms ("MECHANISMS")
.
- PROFILE - Static variable in class nxopen.motion.AnalyticalContactPropertyBuilder.DampingType
-
- PROFILE - Static variable in class nxopen.motion.AnalyticalContactPropertyBuilder.FrictionCoefficientType
-
- PROFILE - Static variable in class nxopen.motion.AnalyticalContactPropertyBuilder.StiffnessType
-
- profile() - Method in interface nxopen.motion.DriverOperation
-
Returns the profile
License requirements: mechanisms ("MECHANISMS")
.
- PROFILE - Static variable in class nxopen.motion.DriverOperation.Type
-
Profile
- profile() - Method in interface nxopen.motion.ExpressionFunctionBuilder
-
Returns the Profile.
- PROFILE - Static variable in class nxopen.motion.ExpressionFunctionBuilder.Type
-
- PROFILE - Static variable in class nxopen.motion.ForceValueTypes
-
profile type use profiles to define force magnitude
- PROFILE - Static variable in class nxopen.motion.JointDefine.ScrewJointDisplCurveType
-
Profile type
- PROFILE - Static variable in class nxopen.motion.JointDefine.ScrewJointRatioType
-
Profile type
- PROFILE - Static variable in class nxopen.motion.LinkCouplerBuilder.CurveChoices
-
Profile
- PROFILE - Static variable in class nxopen.motion.LinkCouplerCoupleBuilder.ScaleChoices
-
Profile
- profile() - Method in interface nxopen.motion.ScalarForceBuilder
-
Returns the profile
License requirements: None.
- profile() - Method in interface nxopen.motion.ScalarTorqueBuilder
-
Returns the profile
License requirements: None.
- PROFILE - Static variable in class nxopen.motion.TirePropertyAdvancedParameters.ContactType
-
- PROFILE - Static variable in class nxopen.motion.TirePropertyAdvancedParameters.FrictType
-
- PROFILE - Static variable in class nxopen.motion.TirePropertyCdBuilder.AmbientTempType
-
- PROFILE - Static variable in class nxopen.motion.TirePropertyCdBuilder.InflationPressureType
-
- PROFILE - Static variable in class nxopen.motion.TirePropertyHighOrderParameters.UnloadingVertStiffType
-
- PROFILE - Static variable in class nxopen.preferences.ShipbuildingLinesViewPreferences.ShipbuildingLines
-
Profile
- profile - Variable in class nxopen.uf.UFPlot.AskDefaultPrinterAndProfileData
-
- PROFILE - Static variable in class nxopen.validate.ResultObject.ResultTypes
-
Profile
- PROFILE2D - Static variable in class nxopen.motion.ConnectorCoefficientTypes
-
2D profile
- PROFILE2D - Static variable in class nxopen.motion.RoadBuilder.SplineDatatypeChoices
-
Profile 2D
- PROFILE2D - Static variable in class nxopen.motion.RoadBuilder.SurfaceDatatypeChoices
-
Profile 2D
- PROFILE2D - Static variable in class nxopen.motion.SegmentBuilder.SplineDatatypeChoices
-
Profile 2D
- PROFILE3D - Static variable in class nxopen.motion.ConnectorCoefficientTypes
-
3D profile
- PROFILE_CURVES - Static variable in class nxopen.features.vehicledesign.TireEnvelopeBuilder.TireDefinitionOption
-
Use curves in the current work part.
- PROFILE_EQ_BILATERAL - Static variable in class nxopen.uf.UFGdt.ProfileType
-
- PROFILE_FLIP_MSIDE - Static variable in class nxopen.cam.CAMObject.Attr
-
- PROFILE_LIST - Static variable in class nxopen.features.shipdesign.ProfileListBuilder.OutputTypes
-
- PROFILE_OF_ALINE - Static variable in class nxopen.annotations.FeatureControlFrameBuilder.FcfCharacteristic
-
profile of a line
- PROFILE_OF_ALINE - Static variable in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.CharacteristicOptions
-
Profile Of A Line
- PROFILE_OF_ASURFACE - Static variable in class nxopen.annotations.FeatureControlFrameBuilder.FcfCharacteristic
-
profile of a sufrace
- PROFILE_OF_ASURFACE - Static variable in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.CharacteristicOptions
-
profile Of A Surface
- PROFILE_OR_PLATE - Static variable in class nxopen.features.shipdesign.SplitProfilePlateBuilder.ProfileType
-
Select profile or plate as target for split.
- PROFILE_POINT_FILE - Static variable in class nxopen.features.vehicledesign.TireEnvelopeBuilder.TireDefinitionOption
-
Read a text file with tire profile points.
- PROFILE_UNEQ_BILATERAL - Static variable in class nxopen.uf.UFGdt.ProfileType
-
- PROFILE_UNILATERAL_IN - Static variable in class nxopen.uf.UFGdt.ProfileType
-
- PROFILE_UNILATERAL_OUT - Static variable in class nxopen.uf.UFGdt.ProfileType
-
- PROFILE_WIDTH - Static variable in class nxopen.features.shipdesign.ExamineSteelFeatureBuilderCheck
-
Check profile width
- profileAttach - Variable in class nxopen.uf.UFGdt.LeaderSpec
-
- profileBlendRadius() - Method in interface nxopen.die.PierceHoleChildBuilder
-
Returns the profile blend radius of the pierce hole
License requirements: ug_die_design ("Die Design")
.
- profileBlendRadius() - Method in interface nxopen.die.PierceHoleParentBuilder
-
Returns the profile blend radius of pierce holes
License requirements: ug_die_design ("Die Design")
.
- profileBodies() - Method in interface nxopen.features.shipdesign.InverseBendingLinesBuilder
-
Returns the profile bodies to create Inverse Bending Lines on.
- profileBodies() - Method in interface nxopen.features.shipdesign.ProfileCutoutBuilder
-
Returns the profiles that are to have a cutout created for them.
- profileBodies() - Method in interface nxopen.features.shipdesign.ShipProfileCutoutBuilder
-
Returns the profile bodies
License requirements: None.
- ProfileBuilder - Interface in nxopen.features.shipdesign
-
- ProfileBuilder.Alignment - Class in nxopen.features.shipdesign
-
Creation method used to define the placement of the belt this
is disabled for profiles
- ProfileBuilder.EndCutOption - Class in nxopen.features.shipdesign
-
Creation method used to define the end cut type
- ProfileBuilder.OrientationOption - Class in nxopen.features.shipdesign
-
Creation method used to define the placement of the profile this
is disabled for belt creation
- ProfileBuilder.SectionOption - Class in nxopen.features.shipdesign
-
Creation of profile from the library or a plate
- ProfileBuilder.TypeOption - Class in nxopen.features.shipdesign
-
Creation type either a belt or a profile
- profileCurve() - Method in interface nxopen.features.StyledBlendBuilder
-
Returns the profile curve
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- profileCurves - Variable in class nxopen.uf.UFModl.AskSweepCurvesData
-
- profileCutout() - Method in interface nxopen.features.shipdesign.CollarPlateBuilder
-
Returns the profile cutout.
- ProfileCutout - Interface in nxopen.features.shipdesign
-
Represents a profile cutout feature for NX8.
- ProfileCutoutBuilder - Interface in nxopen.features.shipdesign
-
- ProfileCutoutBuilder.CollarPlateCreationApproaches - Class in nxopen.features.shipdesign
-
Represents the collar plate creation approaches.
- ProfileCutoutBuilder.Orientation - Class in nxopen.features.shipdesign
-
Represents the profile cutout orientation values.
- profileCutRegions() - Method in interface nxopen.cam.TurnCutParameters
-
Returns the profile cut regions
License requirements: None.
- ProfileData() - Constructor for class nxopen.die.ConnectProfileParentBuilder.ProfileData
-
- profileDirection() - Method in interface nxopen.cam.TurnCutParameters
-
Returns the direction
License requirements: None.
- profileDisposition() - Method in interface nxopen.cam.InspectionAnalyzeBuilder
-
Returns the analysis profile disposition fitting type
License requirements: None.
- profileDispositionMode() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns the analysis profile disposition fitting mode
License requirements: None.
- profileDispositionModeBuilder() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
Returns the Profile Disposition Mode Builder
License requirements: None.
- profileEntries - Variable in class nxopen.die.CastReliefParentBuilder.CastReliefData
-
The profile entries, will be curves, edges, faces, sketches or curve features.
- profileEntries - Variable in class nxopen.die.ConnectProfileParentBuilder.ProfileData
-
profile entries
- profileEntries - Variable in class nxopen.die.DeckParentBuilder.MainDeckData
-
The profile entries, will be curves, edges, faces, sketches or curve features.
- profileEntries - Variable in class nxopen.die.DrawDiePunchBuilder.PunchProfileData
-
The profile entries, will be curves, edges, faces, sketches or curve features.
- profileEntries - Variable in class nxopen.die.FillBuilder.RegionBoundsData
-
profile entries
- profileEntries - Variable in class nxopen.die.FlangeTaskBuilder.RegionBoundsData
-
Profile entries that make up the
boundary of the flange task
- profileEntries - Variable in class nxopen.die.FormTaskBuilder.RegionBoundsData
-
The profile entries, will be curves, edges, faces, sketches or curve features.
- profileEntries - Variable in class nxopen.die.PadChildBuilder.ShapeData
-
The profile entries, will be curves, edges, faces, sketches or curve features.
- profileEntries - Variable in class nxopen.die.PierceHoleChildBuilder.PierceHoleShapeData
-
profile entries
- profileEntries - Variable in class nxopen.die.PierceTaskBuilder.PierceBoundsData
-
Profile entries that make up the
boundary of the pierce task
- profileEntries - Variable in class nxopen.die.RibChildBuilder.CenterlineData
-
The profile entries, will be curves, edges, faces, sketches or curve features.
- profileEntries - Variable in class nxopen.die.RotorBuilder.FlangeBendProfileData
-
The profile entries, will be curves, edges, faces, sketches or curve features.
- profileEntries - Variable in class nxopen.die.SteelInsertBuilder.MainProfileData
-
profile entries
- profileEntries - Variable in class nxopen.die.TrimTaskBuilder.TrimBoundsData
-
Profile entries that make up the
boundary of the trim task
- ProfileFrom - Class in nxopen.routing
-
Describes whether the stock profile is located at the first segment in the
path or the last segment.
- profileLdrLength - Variable in class nxopen.uf.UFGdt.LeaderSpec
-
- ProfileLibrary - Interface in nxopen.mfg.am
-
Interface for Services Profile Library objects
To obtain an instance of this class use
ApplicationManager
.
- profileList() - Method in interface nxopen.facet.SnipFacetBodyBuilder
-
Returns the list of snipping profiles
License requirements: None.
- ProfileList - Interface in nxopen.features.shipdesign
-
Represents a profile list feature
To create or edit an instance of this class, use
ProfileListBuilder
Created in NX5.0.0
- ProfileListBuilder - Interface in nxopen.features.shipdesign
-
- ProfileListBuilder.OutputTypes - Class in nxopen.features.shipdesign
-
Used to specify the desired output.
- profileName() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
Returns the name of the tire profile in the tire file.
- profileOffset() - Method in interface nxopen.die.MachineReliefBuilder
-
Returns the expression containing the value to apply to the profile to create the primary head solid for the cam definition.
- profilePass() - Method in interface nxopen.cam.DmAmBuilder
-
Returns the Profile Pass
License requirements: None.
- ProfilePointAlignmentData() - Constructor for class nxopen.features.MeshSurfaceBuilder.ProfilePointAlignmentData
-
- profilePointFile() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
Returns the name of the file containing the tire profile points.
- profileRelief() - Method in interface nxopen.die.SteelInsertSectionBuilder
-
Returns the profile relief
License requirements: ug_die_design ("Die Design")
.
- profileRelief() - Method in interface nxopen.die.SteelInsertSegmentChildBuilder
-
Returns the profile relief
License requirements: ug_die_design ("Die Design")
.
- profileRelief() - Method in interface nxopen.die.SteelInsertSegmentParentBuilder
-
Returns the profile relief
License requirements: ug_die_design ("Die Design")
.
- profileReliefToggle() - Method in interface nxopen.die.SteelInsertBuilder
-
Returns the profile relief toggle
License requirements: ug_die_design ("Die Design")
.
- profileReliefToggle() - Method in interface nxopen.die.SteelInsertSegmentChildBuilder
-
Returns the profile relief toggle
License requirements: ug_die_design ("Die Design")
.
- profileReliefToggle() - Method in interface nxopen.die.SteelInsertSegmentParentBuilder
-
Returns the profile relief
License requirements: ug_die_design ("Die Design")
.
- profiles() - Method in interface nxopen.tooling.DieDesignTrimPostBuilder
-
Returns the trim profiles used to create Trim Post
License requirements: ug_die_design ("Die Design")
.
- profiles - Variable in class nxopen.uf.UFPlot.AskProfileNamesData
-
- profilesDirection() - Method in interface nxopen.tooling.DieDesignTrimPostBuilder
-
Returns the trim profiles direction used to determine which side the Trim Post will be built,
is true in the direction and false in the opposite direction
License requirements: ug_die_design ("Die Design")
.
- profileSection() - Method in interface nxopen.cam.LaserProfileMove
-
Returns the Profile Section
License requirements: None.
- profileSize() - Method in interface nxopen.features.shipdesign.ProfileBuilder
-
Returns the profile size options
License requirements: None.
- profileSplineLayer() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
Returns the layer of the tire profile.
- ProfileSplitBuilder - Interface in nxopen.tooling
-
- ProfileSplitCollection - Interface in nxopen.tooling
-
Represents a collection of ProfileSplit builder
To obtain an instance of this class, refer to
ToolingManager
Created in NX6.0.0
- profileSplits() - Method in interface nxopen.tooling.ToolingManager
-
Returns the ProfileSplitCollection instance belonging to this part .
- profileStockData() - Method in interface nxopen.features.shipdesign.StiffenerStockBuilder
-
Returns the profile stock data
License requirements: None.
- profileStockData() - Method in interface nxopen.features.shipdesign.SubSystemBuilder
-
Returns the profile sub system stock data.
- ProfileStrategy - Interface in nxopen.cam
-
Represents profile strategy .
- profileStrategy() - Method in interface nxopen.cam.TurnCutParameters
-
Returns the cut strategy
License requirements: None.
- ProfileStrategy.Types - Class in nxopen.cam
-
the profile strategy options .
- profileSystem() - Method in interface nxopen.features.shipdesign.EditBoundaryBuilder
-
Returns the ship structures to change the boundary information
License requirements: None.
- ProfileSystem - Interface in nxopen.features.shipdesign
-
Represents a profile system feature.
- ProfileSystemBuilder - Interface in nxopen.features.shipdesign
-
This class is used to create or edit the information shared between all the Basic Design profile system
features in the Ship Design application.
- profileTerm2 - Variable in class nxopen.uf.UFGdt.LeaderSpec
-
- profileText() - Method in interface nxopen.PlotBuilder
-
Returns the profile text.
- ProfileTransition - Interface in nxopen.features.shipdesign
-
Represents a profile transition feature
To create or edit an instance of this class, use
ProfileTransitionBuilder
Created in NX9.0.0
- ProfileTransitionBuilder - Interface in nxopen.features.shipdesign
-
- ProfileTransitionBuilder.FeatureModeType - Class in nxopen.features.shipdesign
-
Represents the feature mode option.
- ProfileTransitionBuilder.MisalignedModeType - Class in nxopen.features.shipdesign
-
Represents the misaligned profile mode.
- profileType() - Method in interface nxopen.features.shipdesign.ProfileBuilder
-
Returns the profile type options
License requirements: None.
- profileType - Variable in class nxopen.uf.UFGdt.AskProfileTolData
-
- profillingLocalReturnBuilder() - Method in interface nxopen.cam.NcmTurnRoughBuilder
-
Returns the RoughLocal Return builder
License requirements: None.
- PROFINET - Static variable in class nxopen.ame.BusInterfaceType
-
- PROFINET - Static variable in class nxopen.mechatronics.SignalMappingBuilder.AppOption
-
- profinetClient() - Method in interface nxopen.mechatronics.ExternalSignalConfigurationBuilder
-
Returns the Profinet builder that holds the configuration for Profinet clients.
- ProfinetClientBuilder - Interface in nxopen.mechatronics
-
Represents a
ProfinetClientBuilder
builder
This class is sub-object of another builder, and cannot be directly instantiated.
- ProfinetClientBuilder.TagInfo - Class in nxopen.mechatronics
-
Represents Profinet signal definition structure.
- program - Variable in class nxopen.BasePart.HistoryEventInformation
-
program name
- PROGRAM - Static variable in class nxopen.cam.CAMSession.ObjectSubtype
-
NC Program
- PROGRAM - Static variable in class nxopen.cam.InspectionMethodBuilder.InspectionModes
-
Program
- PROGRAM - Static variable in class nxopen.cam.InspectionPathBuilder.InspectModeType
-
Specified by program
- program - Variable in class nxopen.uf.UFPart.AskNthHistoryData
-
- PROGRAM_BLOCKS - Static variable in class nxopen.ame.ChildrenEvaluatorBuilder.FilterType
-
- PROGRAM_DEFAULT - Static variable in class nxopen.cam.InspectionMethodBuilder.InspectionModes
-
Program Default
- PROGRAM_DEFINED - Static variable in class nxopen.geometricutilities.OrientXpressBuilder.Reference
-
Reference CSYS is application defined
- PROGRAM_GROUP - Static variable in class nxopen.cam.CutRegionsBuilder.CutRegionsProgramTypes
-
Program Group
- PROGRAM_HEADER - Static variable in class nxopen.cam.InspectionCmmCommandBuilder.CommandTypes
-
Enter a program header statement
- PROGRAM_LABEL - Static variable in class nxopen.cam.InspectionCmmCommandBuilder.CommandTypes
-
Enter a program label statement
- PROGRAM_ORDER - Static variable in class nxopen.cam.CAMSetup.View
-
program order
- programDefinedCsys() - Method in interface nxopen.geometricutilities.OrientXpressBuilder
-
Returns the orientXpress program defined csys when reference option is set to program defined csys
License requirements: None.
- programFile() - Method in interface nxopen.report.ProgramInformation
-
Returns the automation program executer file.
- programGroup() - Method in interface nxopen.cam.InspectionCreatePathsBuilder
-
Returns the program group
License requirements: None.
- programGroup() - Method in interface nxopen.cam.MirrorBuilder
-
Returns the selected program group
License requirements: None.
- programInformation() - Method in interface nxopen.report.CommandBuilder
-
Returns the automation program information object.
- ProgramInformation - Interface in nxopen.report
-
Represents the program information for command automation.
- ProgramInformation.LanguageType - Class in nxopen.report
-
Represents the automation program.
- programLocationString() - Method in interface nxopen.cam.InspectionCreatePathsBuilder
-
Returns the program location
License requirements: None.
- programLocationString() - Method in interface nxopen.cam.InspectionLinkPmiBuilder
-
Returns the program location string
License requirements: None.
- ProgrammingLanguage - Class in nxopen.ame
-
The Plc Programming Languages
- programName() - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
Returns the program name
License requirements: None.
- programname - Variable in class nxopen.sim.IsvControlPanelBuilder.DetailData
-
- programName - Variable in class nxopen.uf.UF.SystemInfo
-
- programNameMethod() - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
Returns the program name method
License requirements: None.
- ProgramOrderGroupBuilder - Interface in nxopen.cam
-
- PROGRAMS_LOADED - Static variable in class nxopen.sim.IsvControlPanelBuilder.VncMode
-
PROGRAMS LOADED
- programToggle() - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
Returns the program mode toggle
License requirements: None.
- progressionSubtype() - Method in interface nxopen.cae.MeshControlBuilder
-
Returns the progression or bias starting type
License requirements: nx_masterfem ("Finite Element Modeling")
.
- PROGRESSIVE - Static variable in class nxopen.features.MidSurfaceByFacePairsBuilder.PairingStrategyType
-
Progressive thickness is used
- PROGRESSIVE_FAILURE - Static variable in class nxopen.cae.LaminatePly.PlyFailureTheoryType
-
Progressive Failure failure criteria
- progressiveDie() - Method in interface nxopen.tooling.ToolingManager
-
Returns the Progressive Die Manager for this part .
- ProgressiveDieManager - Interface in nxopen.tooling
-
Provides create builder methods for Progressive Die.
- PROHIBITED - Static variable in class nxopen.annotations.SearchCriteriaSurfaceFinishBuilder.SurfaceFinishTypes
-
prohibited
- PROHIBITED_AND_MODIFIER - Static variable in class nxopen.annotations.SearchCriteriaSurfaceFinishBuilder.SurfaceFinishTypes
-
prohibiter and modifier
- PROHIBITED_AND_MODIFIER_AND_ALL_AROUND - Static variable in class nxopen.annotations.SearchCriteriaSurfaceFinishBuilder.SurfaceFinishTypes
-
prohibiter and modifier and all around
- Proj() - Constructor for class nxopen.uf.UFCurve.Proj
-
- Proj(int, Tag, double[], double[], int, int, double, double[]) - Constructor for class nxopen.uf.UFCurve.Proj
-
- Proj1() - Constructor for class nxopen.uf.UFCurve.Proj1
-
- Proj1(UFCurve.Proj, Tag, Tag, UFCurve.JoinTypes, UFModl.CurveFitData) - Constructor for class nxopen.uf.UFCurve.Proj1
-
- PROJ_ALONG_VECTOR - Static variable in class nxopen.uf.UFModl.ProjType
-
- PROJ_CONSTANT - Static variable in class nxopen.uf.UFDpud.ProjOption
-
- PROJ_DIFF_TAXIS - Static variable in class nxopen.cam.CAMObject.Attr
-
- PROJ_NORMAL_TO_CURVES - Static variable in class nxopen.uf.UFModl.ProjType
-
- PROJ_PARAMS - Static variable in class nxopen.uf.UFDpud.Purpose
-
- PROJ_SURFACE - Static variable in class nxopen.cae.ElementExtrudeBuilder.MethodType
-
project to surface
- PROJ_USER_DEFINED - Static variable in class nxopen.uf.UFDpud.ProjOption
-
- PROJ_VARIABLE - Static variable in class nxopen.uf.UFDpud.ProjOption
-
- PROJ_VEC_FIXED - Static variable in class nxopen.cam.ProjVecCiBuilder.DpmProjTypes
-
Specify Vector
- PROJ_VEC_FROM_LINE - Static variable in class nxopen.cam.ProjVecCiBuilder.DpmProjTypes
-
Away from Line
- PROJ_VEC_FROM_POINT - Static variable in class nxopen.cam.ProjVecCiBuilder.DpmProjTypes
-
way from Point
- PROJ_VEC_NORM_TO_DRIVE - Static variable in class nxopen.cam.ProjVecCiBuilder.DpmProjTypes
-
Normal to Drive
- PROJ_VEC_RULING - Static variable in class nxopen.cam.ProjVecCiBuilder.DpmProjTypes
-
Swarf Ruling
- PROJ_VEC_TO_DRIVE - Static variable in class nxopen.cam.ProjVecCiBuilder.DpmProjTypes
-
Toward Drive
- PROJ_VEC_TO_LINE - Static variable in class nxopen.cam.ProjVecCiBuilder.DpmProjTypes
-
Toward Line
- PROJ_VEC_TO_POINT - Static variable in class nxopen.cam.ProjVecCiBuilder.DpmProjTypes
-
Toward Point
- PROJ_VEC_TOOL_AXIS - Static variable in class nxopen.cam.ProjVecCiBuilder.DpmProjTypes
-
Tool Axis
- PROJ_VEC_TOOL_AXIS_UP - Static variable in class nxopen.cam.ProjVecCiBuilder.DpmProjTypes
-
Tool Axis up
- PROJ_VEC_TOTAL - Static variable in class nxopen.cam.ProjVecCiBuilder.DpmProjTypes
-
Total
- PROJ_VEC_USER_DEFINED - Static variable in class nxopen.cam.ProjVecCiBuilder.DpmProjTypes
-
User Function
- projChoice - Variable in class nxopen.uf.UFCurve.AnalysisDisplay
-
- projData - Variable in class nxopen.uf.UFCurve.Proj1
-
- PROJECT - Static variable in class nxopen.ame.AMEBaseNode.NodeType
-
- PROJECT - Static variable in class nxopen.ame.AmeDebugSession.ObjectType
-
- Project - Interface in nxopen.ame
-
Project Journaling class
Created by Application_AME_ApplicationBuilder when we enter the application
.
- PROJECT - Static variable in class nxopen.DatumConstraint.Solution
-
This direction is calculated by projecting a point selected along a curve
to a line, a datum axis, an edge of a solid, a planar face or a datum plane
- PROJECT - Static variable in class nxopen.features.DatumAxisBuilder.AlternateSolution
-
This direction is calculated by projecting a point selected along a curve
to a line, a datum axis, an edge of a solid, a planar face or a datum plane
- PROJECT - Static variable in class nxopen.features.DatumPlaneBuilder.AlternateSolution
-
This direction is calculated by projecting a point selected along a curve
to a line, a datum axis, an edge of a solid, a planar face or a datum plane
- PROJECT - Static variable in class nxopen.features.EdgeSymmetryBuilder.MovementMethods
-
Does a match by projecting poles corresponding to target edge of the surface
- PROJECT - Static variable in class nxopen.features.MatchEdgeBuilder.PoleMovementConstraintEnumType
-
Project
- project() - Method in interface nxopen.pdm.SessionSettings
-
Returns the Teamcenter project in which the user acts.
- PROJECT - Static variable in class nxopen.PlaneTypes.FrenetSubtype
-
Reference to an object, = FRENET_PROJECT
- PROJECT - Static variable in class nxopen.weld.WeldGrooveExtension
-
Project selected edges to opposite face set.
- PROJECT_ABOVE - Static variable in class nxopen.uf.UFDraw.ProjDir
-
- PROJECT_BELOW - Static variable in class nxopen.uf.UFDraw.ProjDir
-
- PROJECT_BOTH_SIDES - Static variable in class nxopen.features.ProjectCurveBuilder.ProjectionOptionType
-
Represents Project Both Sides
- PROJECT_DEFINITION - Static variable in class nxopen.tooling.QuickQuotationBuilder.Types
-
project definition type
- PROJECT_DIE - Static variable in class nxopen.tooling.SpecialPiercingInsertBuilder.ParentPartTypes
-
- PROJECT_DIE_BASE - Static variable in class nxopen.tooling.SpecialPiercingInsertBuilder.ParentPartTypes
-
- PROJECT_DIRECTORY - Static variable in class nxopen.tooling.UnusedFileManagementBuilder.FileDirectory
-
project directory
- PROJECT_EDGE - Static variable in class nxopen.features.subdivision.StartSymmetricModelingBuilder.MirrorProcedureOption
-
Deprecated.
Projects the edges
- PROJECT_INFER - Static variable in class nxopen.uf.UFDraw.ProjDir
-
- PROJECT_LEFT - Static variable in class nxopen.uf.UFDraw.ProjDir
-
- PROJECT_ON_ONE_PLANE - Static variable in class nxopen.drawings.ViewProjectionBuilder.Types
-
on one plane
- PROJECT_ON_TWO_PLANES - Static variable in class nxopen.drawings.ViewProjectionBuilder.Types
-
on two planes
- PROJECT_ONLY - Static variable in class nxopen.cae.NodeProjectBuilder.NodeProjectTypes
-
project only
- PROJECT_POINT - Static variable in class nxopen.geometricutilities.BoundingObjectBuilder.Method
-
Project Point
- PROJECT_RIGHT - Static variable in class nxopen.uf.UFDraw.ProjDir
-
- PROJECT_SUB_DIE_BASE - Static variable in class nxopen.tooling.SpecialPiercingInsertBuilder.ParentPartTypes
-
- PROJECT_TO_ELEMENT_FACES - Static variable in class nxopen.cae.QueryCurveUsageOptions.CurveUsageType
-
- PROJECT_TO_LWPLANE_ALONG_NORMAL_TO_PLANE - Static variable in class nxopen.uf.UFParam.LwplaneUsage
-
- PROJECT_TO_LWPLANE_ALONG_TOOL_AXIS - Static variable in class nxopen.uf.UFParam.LwplaneUsage
-
- PROJECT_TO_STRIP - Static variable in class nxopen.tooling.ScrapDesignBuilder.ScrapDefPosition
-
Scrap will be projected into the strip plane
- PROJECT_TO_TOOL_PATH - Static variable in class nxopen.cam.LaserControlPoint.ProcessTypes
-
Project to Tool Path
- PROJECT_VIEW - Static variable in class nxopen.features.DatumPlaneBuilder.AlternateSolution
-
Datum plane direction is calculated during creation based on the view plane.
- PROJECT_VIEW - Static variable in class nxopen.features.shipdesign.GeneralArrangementViewBuilder.ViewCreationType
-
- PROJECT_WORK_PART_ORIGIN - Static variable in class nxopen.preferences.SessionSketch.OriginType
-
Sketch origin is the projection of the work part origin
- projectAlongDirection() - Method in interface nxopen.weld.DatumCommonBuilder
-
Returns the project along direction.
- projectAsDumbFixedCurves() - Method in interface nxopen.SketchProjectBuilder
-
Returns the flag to indicate if the projection output needs to be converted to dumb fully fixed curves in the sketch.
- ProjectCurve - Interface in nxopen.features
-
Represents a project curve feature.
- ProjectCurveBuilder - Interface in nxopen.features
-
- ProjectCurveBuilder.ArcLengthType - Class in nxopen.features
-
Represents Equal Arc Length type
- ProjectCurveBuilder.DirectionType - Class in nxopen.features
-
Represents direction method
- ProjectCurveBuilder.ProjectionOptionType - Class in nxopen.features
-
Represents projection option type used when direction type is along vector
- projectCurves() - Method in interface nxopen.features.GeodesicProjectBuilder
-
Returns the curves to project
License requirements: None.
- projectCurvesThatLieOnFaceOption() - Method in interface nxopen.features.DividefaceBuilder
-
Returns the Do not project curves that lie on face
License requirements: None.
- projectDirection() - Method in interface nxopen.cae.QueryCurveUsageOptions
-
Returns the projection direction
License requirements: None.
- projectDirection() - Method in interface nxopen.features.AeroFlangeBuilder
-
Returns the project direction
License requirements: None.
- projectDirection() - Method in interface nxopen.features.AeroRibBuilder
-
Returns the project direction
License requirements: None.
- projectDirection() - Method in interface nxopen.features.GeodesicProjectBuilder
-
Returns the project direction of point
License requirements: None.
- projectDirection() - Method in interface nxopen.features.RapidSurfaceBuilder
-
Returns the projection direction
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- projectDirection() - Method in interface nxopen.features.shipdesign.PlateBuilder
-
Returns the project direction, which is used to project the boundary curves to the plate mold face.
- projectDirection() - Method in interface nxopen.features.SnipSurfaceBuilder
-
Returns the project direction
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- projectDirection() - Method in interface nxopen.weld.WeldPointBuilder
-
Returns the project direction
License requirements: ugweld ("UG WELD")
.
- projectDirectionMethod() - Method in interface nxopen.geometricutilities.ProjectionOptions
-
Returns the Projection direction method
License requirements: None.
- projectDirectionObject() - Method in interface nxopen.weld.WeldPointBuilder
-
Returns the project direction NXOpen object
License requirements: ugweld ("UG WELD")
.
- PROJECTDISTANCE - Static variable in class nxopen.features.AOCSBuilder.OffsetType
-
offset_type_projectdistance
- projected() - Method in interface nxopen.annotations.DatumReferenceBuilder
-
Returns the datum reference projected
License requirements: None.
- projected() - Method in interface nxopen.annotations.FeatureControlFrameDataBuilder
-
Returns the projected toggle
License requirements: None.
- projected() - Method in interface nxopen.drawings.ViewStyle
-
Returns object for doing View style settings applicable to Projected .
- projected() - Method in interface nxopen.preferences.ViewPreferences
-
Returns object for doing View Preferences settings applicable to Projected .
- PROJECTED_DISTANCE - Static variable in class nxopen.GenericMeasure.Type
-
- PROJECTED_DISTANCE - Static variable in class nxopen.MeasureDistanceBuilder.DistanceType
-
- PROJECTED_VECTOR - Static variable in class nxopen.features.AOCSBuilder.FilletOptions
-
Use Project Vector to fillet
- PROJECTED_VERTEX - Static variable in class nxopen.motion.BodyContactLms.ForceModelType
-
- PROJECTED_ZONE - Static variable in class nxopen.uf.UFGdt.ModifierTypes
-
- projectedType() - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
Returns the projected enum
License requirements: None.
- projectedValue() - Method in interface nxopen.annotations.FeatureControlFrameDataBuilder
-
- projectedValue() - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
Returns the projected value
License requirements: None.
- projectedValueType() - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
Returns the projected value enum
License requirements: None.
- ProjectedView - Interface in nxopen.drawings
-
Represents a Projected View.
- ProjectedViewBuilder - Interface in nxopen.drawings
-
- projectedViewOrientation() - Method in interface nxopen.drawings.ViewStyleBuilder
-
Returns the projected view orientation builder
License requirements: None.
- ProjectedViewOrientationBuilder - Interface in nxopen.drawings
-
- ProjectedViewPreferences - Interface in nxopen.preferences
-
Represents set of Projected View Preferences applicable to drafting views.
- ProjectedViewStyle - Interface in nxopen.drawings
-
Represents set of Projected View Style Preferences applicable to drafting views.
- ProjectEngineeringObjectBuilder - Interface in nxopen.ame
-
- projectEngObject() - Method in interface nxopen.ame.EngineeringObjectBuilder
-
Returns the project eo ui block
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- ProjectInitializationBuilder - Interface in nxopen.features.shipdesign.generalarrangement
-
This class is used to Initialize general arrangement project.
- PROJECTION - Static variable in class nxopen.cam.InspectionConstructedFeatureBuilder.MethodEnumType
-
Projects a measurement point onto a measured or nominal feature
- projection() - Method in interface nxopen.features.EmbossRegion
-
Returns the emboss projection object
License requirements: None.
- projection() - Method in interface nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder
-
Returns the projection
License requirements: None.
- PROJECTION - Static variable in class nxopen.geometricanalysis.HighlightLinesAnalysisBuilder.DisplayMethods
-
Deprecated.
Create projection lines
- PROJECTION - Static variable in class nxopen.geometricanalysis.HighlightLinesAnalysisBuilder.Types2
-
Create projection lines
- projection() - Method in interface nxopen.tooling.CompDrawingBuilder
-
Returns the drawing projection angle.
- projectionAngle() - Method in interface nxopen.drawings.DrawingSheet
-
Returns the projection angle of the drawing sheet.
- projectionAngle() - Method in interface nxopen.drawings.DrawingSheetBuilder
-
Returns the projection_angle option
License requirements: None.
- projectionAngleType() - Method in interface nxopen.layout2d.ConvertLayoutToSheetBuilder
-
Returns the sheet projection angle option
License requirements: None.
- ProjectionCheckSettings - Interface in nxopen.cae.qualityaudit
-
This class contains settings used by the projection checks.
- projectionDir1() - Method in interface nxopen.features.ShelfBuilder
-
Returns the project direction 1
License requirements: None.
- projectionDir2() - Method in interface nxopen.features.ShelfBuilder
-
Returns the project direction 2
License requirements: None.
- projectionDirection() - Method in interface nxopen.features.FitCurveBuilder
-
Returns the projection direction
License requirements: None.
- projectionDirection() - Method in interface nxopen.features.GlobalShapingBuilder
-
Returns the projection direction
License requirements: None.
- projectionDirection() - Method in interface nxopen.features.HolePackageBuilder
-
Returns the hole direction options
License requirements: None.
- projectionDirection() - Method in interface nxopen.features.shipdesign.Cutout2Builder
-
Returns the direction used to project the custom shape curves
License requirements: None.
- projectionDirection() - Method in interface nxopen.features.shipdesign.PlateSystemBuilder
-
Returns the direction used to project
the boundary section curves onto the mold face.
- projectionDirection() - Method in interface nxopen.features.shipdesign.StiffenerSystemBuilder
-
Returns the direction used to project the stiffener path object
License requirements: None.
- projectionDirection() - Method in interface nxopen.features.TrimSheetBuilder
-
Returns the projection direction
License requirements: None.
- projectionDirection() - Method in interface nxopen.features.VarOffsetFaceBuilder
-
Returns the projection direction
License requirements: None.
- projectionDirection() - Method in interface nxopen.weld.SurfaceWeldBuilder
-
Returns the project direction, which is used to project the boundary curves to the plate mold face.
- projectionDirection1() - Method in interface nxopen.features.StepBuilder
-
Returns the project direction options used to project boundary section curve 1 onto the belt face
License requirements: None.
- projectionDirection2() - Method in interface nxopen.features.StepBuilder
-
Returns the project direction options used to project boundary section curve 2 onto the belt face
License requirements: None.
- projectionDirectionMethod() - Method in interface nxopen.cae.EdgeFaceImprintBuilder
-
Returns the projection direction method
License requirements: None.
- projectionDirectionMethod() - Method in interface nxopen.cae.ImprintBuilder
-
Returns the projection direction method
License requirements: None.
- projectionDirectionMethod() - Method in interface nxopen.features.ProjectCurveBuilder
-
Returns the projection direction method
License requirements: None.
- projectionDirectionOption() - Method in interface nxopen.cae.LaminateDrapingDataBuilder
-
Returns the projection draping direction option
License requirements: None.
- projectionDirectionOption() - Method in interface nxopen.features.FitCurveBuilder
-
Returns the projection direction option
License requirements: None.
- projectionDirectionOption() - Method in interface nxopen.weld.JointmarkBuilder
-
- projectionMethod() - Method in interface nxopen.weld.WeldPointBuilder
-
Returns the project method type.
- projectionNormalFace() - Method in interface nxopen.geometricanalysis.SurfaceIntersectionBuilder
-
Returns the face normal projection
License requirements: None.
- projectionOption() - Method in interface nxopen.cae.MeshPointProjectBuilder
-
Returns the projection method type
License requirements: None.
- projectionOption() - Method in interface nxopen.features.DividefaceBuilder
-
Returns the Projection Options data
License requirements: None.
- projectionOption() - Method in interface nxopen.features.ProjectCurveBuilder
-
Returns the projection option type
License requirements: None.
- projectionOption() - Method in interface nxopen.geometricanalysis.SurfaceIntersectionBuilder
-
Returns the projection option
License requirements: None.
- ProjectionOptions - Interface in nxopen.geometricutilities
-
Represents a ProjectionOptions .
- ProjectionOptions.DirectionType - Class in nxopen.geometricutilities
-
This enum represents the projection direction types
- ProjectionPlaneData() - Constructor for class nxopen.layout2d.CreateComponentFrom3DBuilder.ProjectionPlaneData
-
- projectionPointList() - Method in interface nxopen.features.PointSetBuilder
-
Returns the projection point list.
- projectiontolerance - Variable in class nxopen.cae.FemPart.MeshPreferencesData
-
Projection tolerance
- projectionTolerance() - Method in interface nxopen.cae.MeshPointProjectBuilder
-
Returns the projection tolerance
License requirements: None.
- projectionVector() - Method in interface nxopen.cae.EdgeFaceImprintBuilder
-
Returns the projection vector direction
License requirements: None.
- projectionVector() - Method in interface nxopen.cae.ImprintBuilder
-
Returns the projection vector direction
License requirements: None.
- projectionVector() - Method in interface nxopen.cam.SurfaceContourBuilder
-
Returns the Projection Vector builder (block)
License requirements: None.
- projectionVector() - Method in interface nxopen.facet.SnipFacetBodyBuilder
-
Returns the projection vector
License requirements: None.
- projectionVector() - Method in interface nxopen.features.ProjectCurveBuilder
-
Returns the projection vector
License requirements: None.
- projectionVector() - Method in interface nxopen.MeasureDistanceBuilder
-
Returns the projection vector
License requirements: None.
- projectionVector - Variable in class nxopen.uf.UFGdt.TargetNonPlanarData
-
- projectionXYZ() - Method in interface nxopen.geometricanalysis.SurfaceIntersectionBuilder
-
Returns the xyz projection
License requirements: None.
- projectLastPointToSafePlane() - Method in interface nxopen.cam.InspectionPathBuilder
-
Returns a flag to indicate if last point is created in safe plane
License requirements: None.
- projectLeader() - Method in interface nxopen.tooling.ConcurrentDesignManagementBuilder
-
Returns the project leader name.
- projectLimit() - Method in interface nxopen.cam.InspectionMeasDataBuilder
-
Returns the projection limit when adding measured data
License requirements: None.
- projectLocations - Variable in class nxopen.cae.ProjectNodesToCadGeometryBuilder.NodesData
-
- projectLocations - Variable in class nxopen.cae.ProjectNodesToCadGeometryBuilder.ProximityNodesData
-
- projectMethod - Variable in class nxopen.uf.UFModl.SnipsrfFeatureData
-
- projectName() - Method in interface nxopen.ame.EplanProjectGenerationBuilder
-
Returns the project name
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- projectName() - Method in interface nxopen.features.shipdesign.generalarrangement.ProjectInitializationBuilder
-
Returns the project name
License requirements: None.
- projectName() - Method in interface nxopen.features.shipdesign.ProjectSetupBuilder
-
Returns the project name
License requirements: None.
- projectName() - Method in interface nxopen.tooling.InitProjectBuilder
-
Returns the project name access functions
License requirements: None.
- projectNames - Variable in class nxopen.pdm.PartOperationImportBuilder.DefaultProjectInformationData
-
names of the projects
- ProjectNodesToCadGeometryBuilder - Interface in nxopen.cae
-
Allows you to query the mesh nodes that are off the underlying Cad geometry by a given tolerance,
and if requested this builder can adjust the node locations to put them back on
to the underlying Cad geometry.
- ProjectNodesToCadGeometryBuilder.ListingOption - Class in nxopen.cae
-
Listing Options
- ProjectNodesToCadGeometryBuilder.NodesData - Class in nxopen.cae
-
- ProjectNodesToCadGeometryBuilder.Operation - Class in nxopen.cae
-
Operations
- ProjectNodesToCadGeometryBuilder.ProximityNodesData - Class in nxopen.cae
-
- projectnodestocadoption - Variable in class nxopen.cae.FemPart.MeshPreferencesData
-
Project nodes to CAD
- projectNormals - Variable in class nxopen.uf.UFGdt.TargetNonPlanarData
-
- projectPlaneNormal() - Method in interface nxopen.features.AOCSBuilder
-
Returns the project plane vector
License requirements: solid_modeling ("SOLIDS MODELING") OR insp_programming ("INSPECTION PROGRAMMING")
.
- projectPoint() - Method in interface nxopen.features.GeodesicProjectBuilder
-
Returns the point to project
License requirements: None.
- projectPoints() - Method in interface nxopen.weld.WeldPointBuilder
-
Project selected points along the specified vector to reference sheets
License requirements: ugweld ("UG WELD")
.
- ProjectSetupBuilder - Interface in nxopen.features.shipdesign
-
Represents a project setup builder for ship.
- projectStartPointToSafePlane() - Method in interface nxopen.cam.InspectionPathBuilder
-
Returns a flag to indicate if start point is created in safe plane
License requirements: None.
- projectTargetPath() - Method in interface nxopen.ame.EplanSettingsBuilder
-
Returns the generation path
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- projectTemplateFile() - Method in interface nxopen.ame.EplanSettingsBuilder
-
Returns the project template file
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- projectTemplateFilePath() - Method in interface nxopen.ame.EplanImportProjectTemplateBuilder
-
Returns the project template file path
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- projectToFace() - Method in interface nxopen.cam.InspectionPointFeatureBuilder
-
Returns the project point to face option
License requirements: None.
- projectToFaces() - Method in interface nxopen.die.CompensateRoughDataBuilder
-
Returns the faces to project the output curves onto.
- projectTolerance() - Method in interface nxopen.cae.connections.ITolerance
-
Returns the projection tolerance
License requirements: None.
- projectToNearestGeometry() - Method in interface nxopen.cae.MeshPointProjectBuilder
-
Returns the toggle
License requirements: None.
- projectToSecondWall() - Method in interface nxopen.features.FaceBlendBuilder
-
Returns the projection option for face blend
License requirements: None.
- projectType() - Method in interface nxopen.features.GeodesicProjectBuilder
-
Returns the project
License requirements: None.
- projectVector() - Method in interface nxopen.geometricutilities.ProjectionOptions
-
Returns the Projection vector
License requirements: None.
- projectVector - Variable in class nxopen.uf.UFModl.SnipsrfFeatureData
-
- projectVertices() - Method in interface nxopen.cae.MappedMeshBuilder
-
Returns the project vertices option
License requirements: None.
- projectWorkPartOrigin() - Method in interface nxopen.SketchInPlaceBuilder
-
- projMethod - Variable in class nxopen.uf.UFModl.SmcutoutData
-
- projMethod - Variable in class nxopen.uf.UFModl.SmpunchData
-
- projPathButton() - Method in interface nxopen.tooling.InitProjBuilder
-
Pop up File Selection dialog box to define the project path
License requirements: None.
- projPathStr() - Method in interface nxopen.tooling.InitProjBuilder
-
Returns the project path for a new project
License requirements: None.
- projPnt - Variable in class nxopen.uf.UFCurve.Proj
-
- projTempBut() - Method in interface nxopen.tooling.InitProjBuilder
-
Pop up project template configuration spreadsheet
License requirements: None.
- projTempOpt() - Method in interface nxopen.tooling.InitProjBuilder
-
Returns the project template option
License requirements: None.
- projType - Variable in class nxopen.uf.UFCurve.Proj
-
- projType - Variable in class nxopen.uf.UFModeling.AskSubdivFaceParmsData
-
- projVec - Variable in class nxopen.uf.UFCurve.Proj
-
- ProjVecCiBuilder - Interface in nxopen.cam
-
Represents a tool axis ci Builder .
- ProjVecCiBuilder.DpmProjTypes - Class in nxopen.cam
-
Available types for Project Vector
- projVector - Variable in class nxopen.uf.UFCurve.Proj1
-
- projVector - Variable in class nxopen.uf.UFModl.SmcutoutData
-
- projVector - Variable in class nxopen.uf.UFModl.SmpunchData
-
- ProjZone() - Constructor for class nxopen.uf.UFGdt.ProjZone
-
- ProjZone(Tag, double, int, Tag) - Constructor for class nxopen.uf.UFGdt.ProjZone
-
- PROMISSORY - Static variable in class nxopen.assemblies.DesignElementBuilder.StateType
-
Promissory design element
- PROMISSORY - Static variable in class nxopen.pdm.DesignElementRevision.DesignElementCategory
-
- PROMISSORY_DESIGN_ELEMENT - Static variable in class nxopen.assemblies.CollaborativeContentType
-
Promissory Design Element in a Workset
- PROMISSORY_DESIGN_ELEMENT - Static variable in class nxopen.issue.IssueAttachment.Type
-
Promissory Design Element type
- promMapObjectDown(Tag) - Method in interface nxopen.uf.UFModlGeneral
-
- promMapObjectUp(Tag, Tag) - Method in interface nxopen.uf.UFModlGeneral
-
- promoteBIPGeometry(Component) - Method in interface nxopen.routing.RouteManager
-
Finds all bip components which do not have referencing built-in path updaters and creates them.
- Promotion - Interface in nxopen.features
-
Represents a promotion feature.
- PROMOTION_WITH_SOURCE_SUPPRESSED - Static variable in class nxopen.uf.UFWeight.ExceptionReason
-
- PromotionBuilder - Interface in nxopen.features
-
- PROMPT - Static variable in class nxopen.cae.AssyFEModel.RepositionType
-
prompt
- PROMPT - Static variable in class nxopen.cae.xyplot.Preference.NewWindowChoice
-
Prompts user to show plot graph on either an existing or a new separate graphic window
- prompt() - Method in interface nxopen.features.UserDefinedFeatureExpressionData
-
Returns the prompt for the expression of the user defined feature
License requirements: None.
- prompt() - Method in interface nxopen.features.UserDefinedFeatureReferenceData
-
Returns the prompt for this reference
License requirements: None.
- PROMPT_FOR_NEW - Static variable in class nxopen.features.CopyPasteBuilder.ParentTransferOption
-
Copy Original Curves
- PROMPTFOR_INPUT - Static variable in class nxopen.cam.InspectionCmmCommandBuilder.CommandTypes
-
Enter a statement prompting the user for input
- promptVar() - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
Returns the prompt variable
License requirements: None.
- propagateBreakLines() - Method in interface nxopen.preferences.PartDrafting
-
Returns the propagation of view break.
- propagatePastSharpEdges() - Method in interface nxopen.features.FaceBlendBuilder
-
Returns the propagate past the sharp edges option for face blend
License requirements: None.
- propagateViewBreak() - Method in interface nxopen.drawings.ViewBreakBuilder
-
Returns the propagate view break
License requirements: None.
- propagationAngle() - Method in interface nxopen.features.FaceBlendBuilder
-
Returns the propagation angle for face blend
License requirements: None.
- Properties() - Constructor for class nxopen.cae.BeamSection.Properties
-
- Properties(double, double, double, double, double, double, double, double, double, double, double) - Constructor for class nxopen.cae.BeamSection.Properties
-
Constructor for the Properties object.
- properties - Variable in class nxopen.Session.NamedPropertiesData
-
array of property names
- properties - Variable in class nxopen.uf.UFWeight.EstabCompProps1Data
-
- properties - Variable in class nxopen.uf.UFWeight.EstabCompPropsData
-
- properties - Variable in class nxopen.uf.UFWeight.EstabPartProps1Data
-
- properties - Variable in class nxopen.uf.UFWeight.EstabPartPropsData
-
- Properties() - Constructor for class nxopen.uf.UFWeight.Properties
-
- Properties(UFWeight.UnitsType, UFWeight.StateType, double, double, UFWeight.StateType, double, double, UFWeight.StateType, double, double, UFWeight.StateType, double, double, UFWeight.StateType, double[], double, UFWeight.StateType, double[], double[], double, UFWeight.StateType) - Constructor for class nxopen.uf.UFWeight.Properties
-
- properties - Variable in class nxopen.visualreporting.VisualReportBuilder.ReferencePropertiesOfReportData
-
The reference properties of report
- properties - Variable in class nxopen.visualreporting.VisualReportBuilder.ReferencePropertiesOfReportingPropertyData
-
The reference properties of property
- propertiesManager() - Method in interface nxopen.BasePart
-
Returns the PropertiesManager instance belonging to this part .
- PropertiesManager - Interface in nxopen
-
The PropertiesManager class provides methods to create Gateway Properties Builder objects.
- PROPERTY - Static variable in class nxopen.ame.AccessorEvaluatorBuilder.AccessType
-
- property() - Method in interface nxopen.visualreporting.Condition
-
- Property - Interface in nxopen.visualreporting
-
A property within either a
Rule
or a
Condition
, or used as referenced property
information for the report.
- Property.DatatypeOption - Class in nxopen.visualreporting
-
- Property.TypeOption - Class in nxopen.visualreporting
-
- PROPERTY_PAGE - Static variable in class nxopen.uistyler.Dialog.ItemType
-
- PROPERTY_PAGE - Static variable in class nxopen.uistyler.StylerItem.ItemType
-
Property Page item
- propertyAskNameNx(Tag) - Method in interface nxopen.uf.UFSf
-
- propertyAskTypeNx(Tag) - Method in interface nxopen.uf.UFSf
-
- propertyBasic() - Method in interface nxopen.motion.TireBuilder
-
Returns the basic tire property.
- PropertyBuilder - Interface in nxopen.assemblies.productinterface
-
- propertyCd() - Method in interface nxopen.motion.TireBuilder
-
Returns the CD tire property.
- PropertyContainer - Interface in nxopen
-
Represents a list of properties.
- PropertyContainer.DoubleMatrixData - Class in nxopen
-
- PropertyContainer.IntegerMatrixData - Class in nxopen
-
- PropertyContainer.ListMode - Class in nxopen
-
Indicates whether the properties in the list are named.
- PropertyContainer.PropertyType - Class in nxopen
-
Represents the property types.
- propertyDataType() - Method in interface nxopen.mechatronics.ExternalConnectionElementBuilder
-
Returns the data type of physics property.
- propertyDay - Variable in class nxopen.cae.PropertyTable.DateTimePropertyValueData
-
day of the property
- propertyDescription() - Method in interface nxopen.cae.PostMesh
-
Returns the property description of the post mesh
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- PropertyEvaluatorBuilder - Interface in nxopen.ame
-
- propertyFTire() - Method in interface nxopen.motion.TireBuilder
-
Returns the FT tire property.
- propertyHour - Variable in class nxopen.cae.PropertyTable.DateTimePropertyValueData
-
hour of the property
- propertyId() - Method in interface nxopen.cae.PostMesh
-
Returns the property id of the post mesh
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- propertyId() - Method in interface nxopen.mechatronics.ExternalConnectionElementBuilder
-
Returns the property ID of physics object.
- propertyId() - Method in interface nxopen.mechatronics.GanttOperationConditionBuilder
-
Returns the selected property id in physics object
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- propertyId() - Method in interface nxopen.mechatronics.GanttOperationParameterBuilder
-
Returns the id of property in physics object
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- propertyIdColor() - Method in interface nxopen.cae.PostMesh
-
Returns the color index for the property id assigned to the post mesh
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- propertyIndexToPlot() - Method in interface nxopen.cae.SimBcPlotContoursBuilder
-
- PropertyList - Interface in nxopen.blockstyler
-
Represents a list of properties .
- PropertyList.DoubleMatrixData - Class in nxopen.blockstyler
-
- PropertyList.IntegerMatrixData - Class in nxopen.blockstyler
-
- PropertyList.ListMode - Class in nxopen.blockstyler
-
Indicates whether the properties in the list are named.
- PropertyList.PropertyType - Class in nxopen.blockstyler
-
Represents the property types.
- propertyMin - Variable in class nxopen.cae.PropertyTable.DateTimePropertyValueData
-
minute of the property
- propertyMonth - Variable in class nxopen.cae.PropertyTable.DateTimePropertyValueData
-
month of the property
- propertyMotorcycle() - Method in interface nxopen.motion.TireBuilder
-
Returns the motorcycle tire property.
- propertyMsec - Variable in class nxopen.cae.PropertyTable.DateTimePropertyValueData
-
milisecond of the property
- propertyName() - Method in interface nxopen.ame.AccessorEvaluatorBuilder
-
Returns the property name given by the user
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- propertyName() - Method in interface nxopen.ame.PropertyEvaluatorBuilder
-
Returns the property name given by the user
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- propertyName() - Method in interface nxopen.ame.SortingBlockBuilder
-
Returns the property name given by the user
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- propertyName() - Method in interface nxopen.mechatronics.GanttOperationConditionBuilder
-
Returns the name of selected property
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- propertynames - Variable in class nxopen.preferences.PartFlexiblePrintedCircuitDesign.MaterialPropertiesData
-
properties
- propertynames - Variable in class nxopen.preferences.PartSheetmetal.MaterialPropertiesData
-
property Names
- propertyNameToPlot() - Method in interface nxopen.cae.SimBcPlotContoursBuilder
-
Returns the property name of
SimBC
to plot.
- propertyNonInertial() - Method in interface nxopen.motion.TireBuilder
-
Returns the non-inertial tire property.
- propertyOption() - Method in interface nxopen.cae.NodeElementInfoBuilder
-
Returns the property option, none, short or detailed
License requirements: None.
- PropertyPage - Interface in nxopen.uistyler
-
Represents a PropertyPage for UI Styler .
- propertySecond - Variable in class nxopen.cae.PropertyTable.DateTimePropertyValueData
-
second of the property
- propertySetValueNx(Tag, boolean, int, double, String, int, String[]) - Method in interface nxopen.uf.UFSf
-
- PropertySpecificationData() - Constructor for class nxopen.visualreporting.VisualReportBuilder.PropertySpecificationData
-
- propertyString() - Method in interface nxopen.ame.ObjectConnectionDetailBuilder
-
Returns the selected property name
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- propertyTable() - Method in interface nxopen.cae.AdaptivityExclusionZoneBuilder
-
Returns the adaptivity property table
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- propertyTable() - Method in interface nxopen.cae.AdaptivityMetaSolutionBuilder
-
Returns the Adaptivie Meta solution's property table
License requirements: None.
- propertyTable() - Method in interface nxopen.cae.aerostructures.MarginCalculationBuilder
-
Returns the Property Table
License requirements: nx_masterfem ("Finite Element Modeling")
.
- propertyTable() - Method in interface nxopen.cae.AutoBCBuilder
-
- propertyTable() - Method in interface nxopen.cae.AutoCyclicSymmetryPairsBuilder
-
Returns the AutoPair's property table
License requirements: None.
- propertyTable() - Method in interface nxopen.cae.AutoPairs
-
Returns the property table associated with the auto pairs object.
- propertyTable() - Method in interface nxopen.cae.AutoPairsBuilder
-
Returns the AutoPair's property table
License requirements: None.
- propertyTable() - Method in interface nxopen.cae.BeamSection
-
Returns the section property table of definition
License requirements: None.
- propertyTable() - Method in interface nxopen.cae.CaeRegionBuilder
-
Returns the Region's property table
License requirements: None.
- propertyTable() - Method in interface nxopen.cae.ConflictResolutionBuilder
-
Returns the new BC's property table which can be used to update its property
License requirements: None.
- propertyTable() - Method in interface nxopen.cae.ConstraintResolutionBuilder
-
- propertyTable() - Method in interface nxopen.cae.ConvexMeshBuilder
-
Returns the Convex Mesh property table
The property table contains the parameters needed for the Mesh Refinement
License requirements: None.
- propertyTable() - Method in interface nxopen.cae.DataProcessingBlockBuilder
-
Returns the property table.
- propertyTable() - Method in interface nxopen.cae.ElementTypeBuilder
-
- propertyTable() - Method in interface nxopen.cae.IBeamSectionBuilder
-
Returns the section builder's
PropertyTable
License requirements: None.
- propertyTable() - Method in interface nxopen.cae.Mesh0dBuilder
-
Returns the property table associated with the mesh.
- propertyTable() - Method in interface nxopen.cae.Mesh1dBuilder
-
Returns the property table associated with the mesh.
- propertyTable() - Method in interface nxopen.cae.Mesh2dBuilder
-
Returns the property table associated with the mesh.
- propertyTable() - Method in interface nxopen.cae.Mesh3dHexBuilder
-
Returns the property table associated with the mesh.
- propertyTable() - Method in interface nxopen.cae.Mesh3dHybridBuilder
-
Returns the property table associated with the mesh.
- propertyTable() - Method in interface nxopen.cae.Mesh3dTetBuilder
-
Returns the property table associated with the mesh.
- propertyTable() - Method in interface nxopen.cae.MeshCollectorBuilder
-
Returns the Mesh Collector's Property Table
License requirements: None.
- propertyTable() - Method in interface nxopen.cae.MeshCollectorOccurrenceBuilder
-
Returns the Mesh Collector Occurrence's Property Table
License requirements: None.
- propertyTable() - Method in interface nxopen.cae.MeshRefinementBuilder
-
Returns the Mesh Refinement property table
The property table contains the parameters needed for the Mesh Refinement
License requirements: None.
- propertyTable() - Method in interface nxopen.cae.NamedPropertyTable
-
Returns the property table of the named property table holder
License requirements: nx_masterfem ("Finite Element Modeling")
.
- propertyTable() - Method in interface nxopen.cae.OpenDuctMeshBuilder
-
Returns the Open Duct Mesh property table
The property table contains the parameters needed for the Mesh Refinement
License requirements: None.
- propertyTable() - Method in interface nxopen.cae.PrimitiveMeshBuilder
-
Returns the property table associated with the mesh.
- propertyTable() - Method in interface nxopen.cae.PrimitiveRecipeMeshBuilder
-
Returns the property table associated with the mesh.
- PropertyTable - Interface in nxopen.cae
-
Represents a property table
This is a sub object
.
- propertyTable() - Method in interface nxopen.cae.SimBC
-
Returns the property table associated with the BC object
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- propertyTable() - Method in interface nxopen.cae.SimBCBuilder
-
Returns the property table for the
SimBC
object
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
Created in NX4.0.0
- propertyTable() - Method in interface nxopen.cae.SimConstraintSetBuilder
-
Returns the constraint set's property table
License requirements: None.
- propertyTable() - Method in interface nxopen.cae.SimLoadSetBuilder
-
Returns the Load Set's property table
License requirements: None.
- propertyTable() - Method in interface nxopen.cae.SimSolution
-
Returns the property table associated with the solution object
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- propertyTable() - Method in interface nxopen.cae.SimSolutionStep
-
Returns the property table associated with the step
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- propertyTable() - Method in interface nxopen.PhysicalMaterialBuilder
-
Returns the property table associated with the material object
License requirements: None.
- PropertyTable.DateTimePropertyValueData - Class in nxopen.cae
-
- PropertyTable.PropertyType - Class in nxopen.cae
-
Property Types
- PropertyTable.ScalarWithDataPropertyValueData - Class in nxopen.cae
-
- propertyTno() - Method in interface nxopen.motion.TireBuilder
-
Returns the TNO tire property.
- propertyType() - Method in interface nxopen.visualreporting.Property
-
- propertytype - Variable in class nxopen.visualreporting.VisualReportBuilder.PropertySpecificationData
-
- propertyTypes - Variable in class nxopen.Session.NamedPropertiesData
-
type name of corresponding property
- propertyValue - Variable in class nxopen.BasePropertyTable.BaseScalarWithDataPropertyValueData
-
The current double value of the Scalar
- propertyValue - Variable in class nxopen.BasePropertyTable.ScalarArrayWithUnitsPropertyValueData
-
array of values of the property
- propertyValue - Variable in class nxopen.cae.PropertyTable.ScalarWithDataPropertyValueData
-
The current double value of the Scalar
- propertyvalues - Variable in class nxopen.preferences.PartFlexiblePrintedCircuitDesign.MaterialPropertiesData
-
property Values
- propertyvalues - Variable in class nxopen.preferences.PartSheetmetal.MaterialPropertiesData
-
property Values
- propertyYear - Variable in class nxopen.cae.PropertyTable.DateTimePropertyValueData
-
year of the property
- PROPORTIONAL - Static variable in class nxopen.features.StudioXformBuilderEx.AdvancedMethodOptionType
-
Proportional movement
- PROPORTIONAL_MOVEMENT - Static variable in class nxopen.features.StudioXformBuilder.AdvancedMethodType
-
Deprecated.
Proportional movement
- PROPORTIONAL_MOVEMENT - Static variable in class nxopen.features.StudioXformBuilderEx.AdvancedMethodType
-
Deprecated.
Proportional movement
- proportionalAllU() - Method in interface nxopen.features.StudioXformBuilder
-
- proportionalAllU() - Method in interface nxopen.features.StudioXformBuilderEx
-
Returns a value indicating whether to use all poles in U direction during the proportional movement
License requirements: None.
- proportionalAllV() - Method in interface nxopen.features.StudioXformBuilder
-
- proportionalAllV() - Method in interface nxopen.features.StudioXformBuilderEx
-
Returns a value indicating whether to use all poles in V direction during the proportional movement
License requirements: None.
- proportionalFallOffScale() - Method in interface nxopen.features.StudioXformBuilder
-
- proportionalFallOffScale() - Method in interface nxopen.features.StudioXformBuilderEx
-
- proportionalMoveAfterU() - Method in interface nxopen.features.StudioXformBuilder
-
- proportionalMoveAfterU() - Method in interface nxopen.features.StudioXformBuilderEx
-
Returns a value indicating the pole number after u to participate in the proportional movement
License requirements: None.
- proportionalMoveAfterV() - Method in interface nxopen.features.StudioXformBuilder
-
- proportionalMoveAfterV() - Method in interface nxopen.features.StudioXformBuilderEx
-
Returns a value indicating the pole number after v to participate in the proportional movement
License requirements: None.
- proportionalMoveBeforeU() - Method in interface nxopen.features.StudioXformBuilder
-
- proportionalMoveBeforeU() - Method in interface nxopen.features.StudioXformBuilderEx
-
Returns a value indicating the pole number before u to participate in the proportional movement
License requirements: None.
- proportionalMoveBeforeV() - Method in interface nxopen.features.StudioXformBuilder
-
- proportionalMoveBeforeV() - Method in interface nxopen.features.StudioXformBuilderEx
-
Returns a value indicating the pole number before v to participate in the proportional movement
License requirements: None.
- proportionalPoleControlOption() - Method in interface nxopen.features.StudioXformBuilderEx
-
Returns the proportional pole control type
License requirements: None.
- proportionalReset() - Method in interface nxopen.features.StudioXformBuilder
-
- proportionalReset() - Method in interface nxopen.features.StudioXformBuilderEx
-
- protectCell() - Method in interface nxopen.annotations.TableCellStyleBuilder
-
Returns the protect cell
License requirements: None.
- protectCells() - Method in interface nxopen.annotations.TableColumnBuilder
-
Returns the protect cells specifies whether cells of column are protected.
- protectedFlag() - Method in interface nxopen.diagramming.tables.TableSettingsBuilder
-
Returns the protected flag.
- protectedMove() - Method in interface nxopen.cam.MoveBuilder
-
Returns the protected move status
License requirements: None.
- protectFromDelete() - Method in interface nxopen.SmartObject
-
Protects the SmartObject from being deleted if any referencing objects are deleted.
- protectionAreaElementIndex() - Method in interface nxopen.sim.SinumerikCaExportBuilder
-
Returns the index used when exporting protection area elements to the SPF file
License requirements: None.
- protectionAreaIndex() - Method in interface nxopen.sim.SinumerikCaExportBuilder
-
Returns the index used when exporting protection areas to the SPF file
License requirements: None.
- protectUpdate() - Method in interface nxopen.display.TrueShadingBuilder
-
Protects update
License requirements: None.
- proto - Variable in class nxopen.XformCollection.CreateExtractXformData
-
Prototype of the object being extracted
- PROTO_ELEM_COLL - Static variable in class nxopen.cae.ModelDisplayBuilder.ElmClrBasis
-
Prototype Mesh
- prototype() - Method in interface nxopen.INXObject
-
Returns the prototype of this object if it is an occurrence.
- prototypePort() - Method in interface nxopen.routing.electrical.PathArrangementBuilder
-
Returns the prototype of the extract port that is used as the reference port.
- prototypePortPartOccurrence() - Method in interface nxopen.routing.electrical.PathArrangementBuilder
-
Returns the component part that contains the prototype of the extract port that is used as the reference
port.
- PROTRACTOR - Static variable in class nxopen.uf.UFDisp.PolyMarker
-
- PROTRACTOR - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- protractorEnd() - Method in interface nxopen.MeasureAngleBuilder
-
Returns the protractor end point
License requirements: solid_modeling ("SOLIDS MODELING")
.
- PROXIMITY - Static variable in class nxopen.cae.CAEConnectionBuilder.MethodTypeEnum
-
Based on proximity
- PROXIMITY - Static variable in class nxopen.cae.connections.NodalPairingMethod
-
Proximity
- proximity() - Method in interface nxopen.mechatronics.AlignBodyBuilder
-
Returns the proximity for distance detection.
- PROXIMITY_SWITCH - Static variable in class nxopen.linedesigner.ConveyorStationFeatureBuilder.Type
-
- proximityNodes - Variable in class nxopen.cae.ProjectNodesToCadGeometryBuilder.ProximityNodesData
-
- ProximityNodesData() - Constructor for class nxopen.cae.ProjectNodesToCadGeometryBuilder.ProximityNodesData
-
- proximityObject() - Method in interface nxopen.features.IsolateFeatureBuilder
-
Returns the Proximity Object.
- ProximitySearchTerm - Interface in nxopen.assemblies
-
- ProximitySearchTermBuilder - Interface in nxopen.assemblies
-
A ProximitySearchTermBuilder is used to create or edit an
BoxSearchTerm
.
- PROXIMITYTO_ROUTING_CONTENT - Static variable in class nxopen.assemblies.MechanicalRoutingSubsetBuilder.SurroundingDataRecipeMethod
-
- proximityTolerance() - Method in interface nxopen.cae.ProjectNodesToCadGeometryBuilder
-
- proxy() - Method in interface nxopen.diagramming.PortBuilder
-
Returns the proxy port for the port inside the super node.
- PROXY_OBJECT - Static variable in class nxopen.mechatronics.ProxyObjectBuilder.Type
-
Proxy Object
- proxyAssignConnector(Port) - Method in interface nxopen.routing.electrical.ConnectorDevice
-
Assign a connector to a proxy port.
- proxyAttributeForLocking() - Method in interface nxopen.AttributeTemplatesBuilder
-
Returns the proxy attribute for locking.
- ProxyObject - Interface in nxopen.mechatronics
-
Represents the Proxy Object class.
- proxyObject() - Method in interface nxopen.mechatronics.ProxyOverrideObjectBuilder
-
Returns the proxy object that is encapsulated in the proxy override object
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- ProxyObjectBuilder - Interface in nxopen.mechatronics
-
- ProxyObjectBuilder.Type - Class in nxopen.mechatronics
-
the Builder types.
- ProxyObjectCollection - Interface in nxopen.mechatronics
-
Represents a collection of Proxy Object.
- proxyObjectCollection() - Method in interface nxopen.Part
-
Returns the ProxyObjectCollection instance belonging to this part .
- proxyObjectName() - Method in interface nxopen.mechatronics.ProxyObjectBuilder
-
Returns the name of the proxy object
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- ProxyObjectParameterBuilder - Interface in nxopen.mechatronics
-
- ProxyObjectParameterBuilderList - Interface in nxopen.mechatronics
-
Represents a list of objects.
- ProxyOverrideObject - Interface in nxopen.mechatronics
-
Represents the Proxy Override Object class.
- ProxyOverrideObjectBuilder - Interface in nxopen.mechatronics
-
- ProxyOverrideObjectBuilder.AttrBoolValue - Class in nxopen.mechatronics
-
the value for the boolean option
- ProxyOverrideObjectBuilder.AttrType - Class in nxopen.mechatronics
-
the parameter attribute option.
- ProxyOverrideObjectCollection - Interface in nxopen.mechatronics
-
Represents a collection of Proxy Override Object.
- proxyOverrideObjectCollection() - Method in interface nxopen.Part
-
Returns the ProxyOverrideObjectCollection instance belonging to this part .
- proxyOverrideObjectName() - Method in interface nxopen.mechatronics.ProxyOverrideObjectBuilder
-
Returns the name of the proxy override object
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- ProxyPort - Interface in nxopen.routing
-
A
ProxyPort
is a port that represents a connector in
another design zone, but not present in this design zone.
- ProxyPortCollection - Interface in nxopen.routing
-
Represents a collection of
ProxyPort
objects.
- proxyPorts() - Method in interface nxopen.routing.RouteManager
-
ProxyPort Collection .
- PRT_PART_OPEN_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- PRT_TYPE - Static variable in class nxopen.tooling.ToolingCloneparttype
-
Normal NX part
- ps() - Method in interface nxopen.UFSession
-
- PSD_ANGULAR_ACCELERATION - Static variable in class nxopen.cae.Result.Quantity
-
- PSD_ANGULAR_VELOCITY - Static variable in class nxopen.cae.Result.Quantity
-
- PSD_FORCE_MPC - Static variable in class nxopen.cae.Result.Quantity
-
- PSD_PLY_STRAIN - Static variable in class nxopen.cae.Result.Quantity
-
- PSD_ROTATION - Static variable in class nxopen.cae.Result.Quantity
-
- PSDACCELERATION - Static variable in class nxopen.cae.Result.Quantity
-
Vibrations : Acceleration PSD - accel^2/Hz, must have: g^2/Hz
- PSDDISPLACEMENT - Static variable in class nxopen.cae.Result.Quantity
-
Vibrations : Displacement PSD - displ^2/Hz
- PSDELEMENT_FORCE - Static variable in class nxopen.cae.Result.Quantity
-
Forces : Element Force PSD - force^2/Hz
- PsdfitFittedData() - Constructor for class nxopen.cae.AfuMathFastRMSOutput.PsdfitFittedData
-
- psdfitFittedX - Variable in class nxopen.cae.AfuMathFastRMSOutput.PsdfitFittedData
-
the x values for the fitted PSD
- psdfitFittedY - Variable in class nxopen.cae.AfuMathFastRMSOutput.PsdfitFittedData
-
the y values for the fitted PSD
- psdfitFreqValue1 - Variable in class nxopen.cae.AfuMathFastRMSOutput.PsdfitFittedData
-
Frequency Value 1: Minimum Freq for Even Function
- psdfitFreqValue2 - Variable in class nxopen.cae.AfuMathFastRMSOutput.PsdfitFittedData
-
Frequency Value 2: Frequency Increment for Even Function
- PsdfitOriginalData() - Constructor for class nxopen.cae.AfuMathFastRMSOutput.PsdfitOriginalData
-
- psdfitOriginalX - Variable in class nxopen.cae.AfuMathFastRMSOutput.PsdfitOriginalData
-
The Original PSD function x values
- psdfitOriginalY - Variable in class nxopen.cae.AfuMathFastRMSOutput.PsdfitOriginalData
-
The Original PSD function y values
- PSDPER_PLY_STRESS - Static variable in class nxopen.cae.Result.Quantity
-
Stress : Stress PSD Per ply - stress^2/Hz, eg Pa^2/Hz
- PSDPER_PLY_STRESS_PER_STRAIN - Static variable in class nxopen.cae.Result.Quantity
-
Strain : Stress/Strain PSD Per ply - unitless/Hz, eg (mm/mm)/Hz
- PSDPRESSURE - Static variable in class nxopen.cae.Result.Quantity
-
Acoustic-related : Pressure PSD - Pa^2/Hz
- PSDREACTION_FORCE - Static variable in class nxopen.cae.Result.Quantity
-
Reaction Force PSD
- PSDRMSACCELERATION - Static variable in class nxopen.cae.Result.Quantity
-
Vibrations : Acceleration PSD RMS - accel, eg, m/s^2, must have: g
- PSDRMSDISPLACEMENT - Static variable in class nxopen.cae.Result.Quantity
-
Vibrations : Displacement PSD RMS - displ
- PSDRMSELEMENT_FORCE - Static variable in class nxopen.cae.Result.Quantity
-
Forces : Element Force PSD RMS - Force
- PSDRMSPRESSURE - Static variable in class nxopen.cae.Result.Quantity
-
Acoustic-related : Pressure PSD RMS - Pa
- PSDRMSSPCFORCE - Static variable in class nxopen.cae.Result.Quantity
-
Forces : SPC Force PSD RMS - Force
- PSDRMSSTRESS - Static variable in class nxopen.cae.Result.Quantity
-
Stress : Stress PSD RMS - stress
- PSDRMSSTRESS_PER_STRAIN - Static variable in class nxopen.cae.Result.Quantity
-
Strain : Stress/Strain PSD RMS - unitless, eg mm/mm
- PSDRMSVELOCITY - Static variable in class nxopen.cae.Result.Quantity
-
Vibrations : Velocity PSD RMS - vel
- PSDSPCFORCE - Static variable in class nxopen.cae.Result.Quantity
-
Forces : SPC Force PSD - force^2/Hz
- PSDSTRAIN - Static variable in class nxopen.cae.Result.Quantity
-
Strain : Strain PSD - unitless/Hz, eg (mm/mm)/Hz
- PSDSTRESS - Static variable in class nxopen.cae.Result.Quantity
-
Stress : Stress PSD - stress^2/Hz, eg Pa^2/Hz
- PSDVELOCITY - Static variable in class nxopen.cae.Result.Quantity
-
Vibrations : Velocity PSD - vel^2/Hz
- PSF_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- PSHEAR - Static variable in class nxopen.cae.ModelUpdateDesignVariablesRapidCreateBuilder.PhysicalTypesEnum
-
- PSHELL - Static variable in class nxopen.cae.ModelUpdateDesignVariablesRapidCreateBuilder.PhysicalTypesEnum
-
- PSM - Static variable in class nxopen.facet.STLImportBuilder.FacetBodyTypes
-
Import to Facet Brep format
- psolutions - Variable in class nxopen.cae.SimSolveManager.ChainOfPrerequisitesData
-
the prerequisites of the input solution
- psyncData - Variable in class nxopen.cae.FemPart.GeometryData
-
Syncrhonize options object
- pt - Variable in class nxopen.uf.UFUi.ChainedPoints
-
- pt11Left() - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder
-
Returns the left PT11 additional geometry.
- pt11LeftFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder
-
Returns the left PT11 additional geometry flag.
- pt11Right() - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder
-
Returns the right PT11 additional geometry.
- pt11RightFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder
-
Returns the right PT11 additional geometry flag.
- pt12Left() - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder
-
Returns the left PT12 additional geometry.
- pt12LeftFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder
-
Returns the left PT12 additional geometry flag.
- pt12Right() - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder
-
Returns the right PT12 additional geometry.
- pt12RightFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder
-
Returns the right PT12 additional geometry flag.
- pt14Left() - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder
-
Returns the left PT14 additional geometry.
- pt14LeftFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder
-
Returns the left PT14 additional geometry flag.
- pt14Right() - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder
-
Returns the right PT14 additional geometry.
- pt14RightFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder
-
Returns the right PT14 additional geometry flag.
- pt15Left() - Method in interface nxopen.features.vehicledesign.HeadImpactOtherRailDetailBuilder
-
Returns the left PT15 additional geometry.
- pt15LeftFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactOtherRailDetailBuilder
-
Returns the left PT15 additional geometry flag.
- pt15Right() - Method in interface nxopen.features.vehicledesign.HeadImpactOtherRailDetailBuilder
-
Returns the right PT15 additional geometry.
- pt15RightFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactOtherRailDetailBuilder
-
Returns the right PT15 additional geometry flag.
- pt16Left() - Method in interface nxopen.features.vehicledesign.HeadImpactOtherRailDetailBuilder
-
Returns the left PT16 additional geometry.
- pt16LeftFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactOtherRailDetailBuilder
-
Returns the left PT16 additional geometry flag.
- pt16Right() - Method in interface nxopen.features.vehicledesign.HeadImpactOtherRailDetailBuilder
-
Returns the right PT16 additional geometry.
- pt16RightFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactOtherRailDetailBuilder
-
Returns the right PT16 additional geometry flag.
- pt1Coord - Variable in class nxopen.uf.UFMotion.SpringDamper
-
- pt2Coord - Variable in class nxopen.uf.UFMotion.SpringDamper
-
- pt4Left() - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder
-
Returns the left PT4 additional geometry.
- pt4LeftFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder
-
Returns the left PT4 additional geometry flag.
- pt4Right() - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder
-
Returns the right PT4 additional geometry.
- pt4RightFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder
-
Returns the right PT4 additional geometry flag.
- pt6Left() - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarDetailBuilder
-
Returns the left PT6 additional geometry.
- pt6LeftFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarDetailBuilder
-
Returns the left PT6 additional geometry flag.
- pt6Right() - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarDetailBuilder
-
Returns the right PT6 additional geometry.
- pt6RightFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarDetailBuilder
-
Returns the right PT6 additional geometry flag.
- pt7Left() - Method in interface nxopen.features.vehicledesign.HeadImpactRPillarDetailBuilder
-
Returns the left PT7 additional geometry.
- pt7LeftFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactRPillarDetailBuilder
-
Returns the left PT7 additional geometry flag.
- pt7Right() - Method in interface nxopen.features.vehicledesign.HeadImpactRPillarDetailBuilder
-
Returns the right PT7 additional geometry.
- pt7RightFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactRPillarDetailBuilder
-
Returns the right PT7 additional geometry flag.
- ptielems - Variable in class nxopen.cae.FEElemEdge.ElementsAndEdgeIdsData
-
- ptielems - Variable in class nxopen.cae.FEElemFace.ElementsAndFaceIdsData
-
- ptName - Variable in class nxopen.uf.UFSket.AskLegacyPreferencesData
-
- ptOnObj1 - Variable in class nxopen.uf.UFModeling.AskMinimumDist2Data
-
- ptOnObj1 - Variable in class nxopen.uf.UFModeling.AskMinimumDist3Data
-
- ptOnObj1 - Variable in class nxopen.uf.UFModeling.AskMinimumDistData
-
- ptOnObj2 - Variable in class nxopen.uf.UFModeling.AskMinimumDist2Data
-
- ptOnObj2 - Variable in class nxopen.uf.UFModeling.AskMinimumDist3Data
-
- ptOnObj2 - Variable in class nxopen.uf.UFModeling.AskMinimumDistData
-
- pts - Variable in class nxopen.uf.UFSmd.EvalTrimAnglesData
-
- PtSlopeCrvatr() - Constructor for class nxopen.uf.UFCurve.PtSlopeCrvatr
-
- PtSlopeCrvatr(double[], int, double[], int, double[]) - Constructor for class nxopen.uf.UFCurve.PtSlopeCrvatr
-
- PTUBE - Static variable in class nxopen.cae.ModelUpdateDesignVariablesRapidCreateBuilder.PhysicalTypesEnum
-
- ptype() - Method in interface nxopen.MeasureAngleBuilder
-
Returns the ptype
License requirements: None.
- PUBLIC - Static variable in class nxopen.assemblies.Subset.ContentType
-
Represents a public content subset
- publish() - Method in interface nxopen.cam.InspectionGraphicalReportOutputBuilder
-
Output the graphical reports
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- publish(CAMObject[], CAMObject, int) - Method in interface nxopen.cam.WorkInstructionOutputBuilder
-
Publish the Work Instructions
License requirements: nx_wi_authoring (" NX Work Instruction Authoring")
.
- PublishComponentBuilder - Interface in nxopen.layout2d
-
Represents a Builder for Publish 2D Component functionality which will allow
local definitions to be exported into external storage locations
To create a new instance of this class, use
ComponentCollection.createPublishComponentBuilder()
Created in NX10.0.0
- publishOptionalInfo() - Method in interface nxopen.pdm.PartOperationImportBuilder
-
Returns the optional information publishing
License requirements: None.
- PULL_RELATION_TYPE - Static variable in class nxopen.uf.UFGdt.RelationType
-
- pullCoordinateSystem() - Method in interface nxopen.cae.optimization.TBSCastCondition
-
Returns the coordinate system for the definition of the pull direction
License requirements: None.
- pullDirection() - Method in interface nxopen.cae.optimization.TBSCastCondition
-
Returns the pull direction for the element groups in the form of a vector with global coordinate system
License requirements: None.
- PullFace - Interface in nxopen.features
-
Represents a pull face feature
To create or edit an instance of this class, use
PullFaceBuilder
Created in NX6.0.0
- PullFaceBuilder - Interface in nxopen.features
-
- pullTolerance(Tag, Tag, boolean) - Method in interface nxopen.uf.UFGdt
-
- pulseDuration() - Method in interface nxopen.cae.responsesimulation.VelocityImpactParameters
-
Returns the impact pulse duration
License requirements: None.
- pulseDutycycle - Variable in class nxopen.cae.Post.AnimationStreamline
-
not yet supported
- PUMPING_POWER - Static variable in class nxopen.cae.Result.Quantity
-
- PUNCH - Static variable in class nxopen.die.AddendumSectionBuilder.SegmentType
-
Update punch segment.
- PUNCH - Static variable in class nxopen.tooling.BendInsertDesignBuilder.InsertTypeOption
-
punch insert
- punch() - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
Returns the selected punch.
- PUNCH - Static variable in class nxopen.tooling.LsdynaGeometryPreparationBuilder.TargetBinder
-
For the process, the target of binder is punch.
- PUNCH - Static variable in class nxopen.tooling.LsdynaGeometryPreparationBuilder.TargetDie
-
For the process, the target of die is punch.
- PUNCH - Static variable in class nxopen.tooling.LsdynaGeometryPreparationBuilder.TargetPunch
-
For the process, the target of punch is punch.
- PUNCH - Static variable in class nxopen.tooling.SpecialFormingBuilder.PunchOrDie
-
- PUNCH - Static variable in class nxopen.tooling.SpecialPiercingInsertBuilder.PunchOrDieTypes
-
- PUNCH_INSERT - Static variable in class nxopen.tooling.PiercingInsertBuilder.Types
-
the punch insert type
- PUNCH_MOUNT - Static variable in class nxopen.tooling.InsertAuxiliaryBuilder.Types
-
punch mount
- PUNCH_PLATE - Static variable in class nxopen.tooling.BendInsertDesignBuilder.BlankPositions
-
the blank is on the punch plate
- PUNCH_PLATE - Static variable in class nxopen.tooling.FormingInsertBuilder.BlankPositions
-
the blank is on the punch plate
- PUNCH_SIDE - Static variable in class nxopen.tooling.DieCavityAndSlugHoleBuilder.OffsetSideOptionItems
-
The offset side is punch
- PUNCH_SIDE - Static variable in class nxopen.tooling.PiercingInsertBuilder.NormalOffsetSideType
-
The offset side is punch
- PUNCH_SIDE - Static variable in class nxopen.tooling.PunchInsertBuilder.NormalOffsetSideTypeItems
-
The offset side is punch
- PUNCH_SIDE - Static variable in class nxopen.tooling.SpecialPiercingInsertBuilder.NormalOffsetSideType
-
The offset side is punch
- PUNCH_SMCUTOUT - Static variable in class nxopen.uf.UFModl.SmcutoutType
-
- PUNCH_SMHOLE - Static variable in class nxopen.uf.UFModl.SmholeType
-
- PUNCH_SMSLOT - Static variable in class nxopen.uf.UFModl.SmslotType
-
- PUNCH_TYPE - Static variable in class nxopen.features.sheetmetal.SolidPunchBuilder.Types
-
- punchCurve() - Method in interface nxopen.tooling.DieDesDrawDieBuilder
-
Returns the punch curve, which is used for extrusion.
- punchCurve() - Method in interface nxopen.tooling.DieDesDrawPunchBuilder
-
Returns the punch curve, which is used for wall extrusion.
- punchDiameter() - Method in interface nxopen.die.PierceItemBuilder
-
Returns the punch radius
License requirements: None.
- punchDirection() - Method in interface nxopen.annotations.LocatorDesignatorBuilder
-
Returns the punch direction
License requirements: None.
- PUNCHED - Static variable in class nxopen.features.sheetmetal.BeadBuilder.EndTypeOptions
-
- punchEdge() - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
Returns the punch edge.
- punchEditOffsetValueTable() - Method in interface nxopen.tooling.PiercingInsertBuilder
-
Edit offset value table.
- punchEditOffsetValueTable() - Method in interface nxopen.tooling.PunchInsertBuilder
-
Edit offset value table.
- punchedWidth() - Method in interface nxopen.features.sheetmetal.BeadBuilder
-
Returns the Punched width of the bead.
- punchHeadHeight() - Method in interface nxopen.tooling.BurringInsertBuilder
-
Returns the punch head height value of blank.
- PunchInsertBuilder - Interface in nxopen.tooling
-
Represents punch insert builder.
- PunchInsertBuilder.InsertPositionItems - Class in nxopen.tooling
-
Specifies the position of piercing inserts, for EDW only
- PunchInsertBuilder.NormalClearanceOptionTypeItems - Class in nxopen.tooling
-
Specifies the design option of piercing insert.
- PunchInsertBuilder.NormalOffsetSideTypeItems - Class in nxopen.tooling
-
Specifies the offset side of normal pierce insert design.
- PunchInsertBuilder.PunchPocketTypeItemsBackingPlate - Class in nxopen.tooling
-
Specifies the punch pocket type in backing plate.
- PunchInsertBuilder.PunchPocketTypeItemsPunchPlate - Class in nxopen.tooling
-
Specifies the punch pocket type in punch plate.
- PunchInsertBuilder.PunchPocketTypeItemsStripperPlate - Class in nxopen.tooling
-
Specifies the punch pocket type in stripper plate.
- punchInsertTag() - Method in interface nxopen.tooling.PunchInsertBuilder
-
Returns the punch insert tag.
- punchLength() - Method in interface nxopen.die.PierceItemBuilder
-
Returns the punch length
License requirements: None.
- punchOffsetValue() - Method in interface nxopen.tooling.PiercingInsertBuilder
-
Returns the punch offset value.
- punchOffsetValue() - Method in interface nxopen.tooling.PunchInsertBuilder
-
Returns the punch offset value.
- punchOrDie() - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder
-
Returns the punch or die
License requirements: None.
- punchOrDieToEdit() - Method in interface nxopen.tooling.BurringInsertBuilder
-
Returns the punch or die to edit
License requirements: None.
- punchOrDieToEdit() - Method in interface nxopen.tooling.FormingInsertBuilder
-
Returns the punch or die to edit
License requirements: None.
- punchPenetration() - Method in interface nxopen.tooling.DieDesPierceInsertBuilder
-
Returns the punch penetration value.
- punchPlateClearance() - Method in interface nxopen.tooling.BendInsertDesignBuilder
-
Returns the clearance value of punch plate.
- punchPlateClearance() - Method in interface nxopen.tooling.FormingInsertBuilder
-
Returns the clearance value of punch plate .
- punchPlateClearance() - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
Returns the punch plate clearance.
- punchPocketClearanceForBackingPlate() - Method in interface nxopen.tooling.PunchInsertBuilder
-
Returns the punch pocket clearance for backing plate.
- punchPocketClearanceForBP() - Method in interface nxopen.tooling.PiercingInsertBuilder
-
Returns the punch pocket clearance for backing plate.
- punchPocketClearanceForPP() - Method in interface nxopen.tooling.PiercingInsertBuilder
-
Returns the punch pocket clearance for punch plate.
- punchPocketClearanceForPunchPlate() - Method in interface nxopen.tooling.PunchInsertBuilder
-
Returns the punch pocket clearance for punch plate.
- punchPocketClearanceForSP() - Method in interface nxopen.tooling.PiercingInsertBuilder
-
Returns the punch pocket clearance for stripper plate.
- punchPocketClearanceForStripperPlate() - Method in interface nxopen.tooling.PunchInsertBuilder
-
Returns the punch pocket clearance for stripper plate.
- punchPocketHeightInSP() - Method in interface nxopen.tooling.PiercingInsertBuilder
-
Returns the punch pocket height in the stripper plate.
- punchPocketHeightInStripperPlate() - Method in interface nxopen.tooling.PunchInsertBuilder
-
Returns the punch pocket height in the stripper plate.
- punchPocketToggleForBackingPlate() - Method in interface nxopen.tooling.PunchInsertBuilder
-
Returns the punch pocket toggle for backing plate.
- punchPocketToggleForBP() - Method in interface nxopen.tooling.PiercingInsertBuilder
-
Returns the punch pocket toggle for backing plate.
- punchPocketToggleForPP() - Method in interface nxopen.tooling.PiercingInsertBuilder
-
Returns the punch pocket toggle for punch plate.
- punchPocketToggleForPunchPlate() - Method in interface nxopen.tooling.PunchInsertBuilder
-
Returns the punch pocket toggle for punch plate.
- punchPocketToggleForSP() - Method in interface nxopen.tooling.PiercingInsertBuilder
-
Returns the punch pocket toggle for stripper plate.
- punchPocketToggleForStripperPlate() - Method in interface nxopen.tooling.PunchInsertBuilder
-
Returns the punch pocket toggle for stripper plate.
- punchPocketTypeInBackingPlate() - Method in interface nxopen.tooling.PunchInsertBuilder
-
Returns the punch pocket type in backing plate.
- punchPocketTypeInBP() - Method in interface nxopen.tooling.PiercingInsertBuilder
-
Returns the punch pocket type in backing plate.
- punchPocketTypeInPP() - Method in interface nxopen.tooling.PiercingInsertBuilder
-
Returns the punch pocket type in punch plate.
- punchPocketTypeInPunchPlate() - Method in interface nxopen.tooling.PunchInsertBuilder
-
Returns the punch pocket type in punch plate.
- punchPocketTypeInSP() - Method in interface nxopen.tooling.PiercingInsertBuilder
-
Returns the punch pocket type in stripper plate.
- punchPocketTypeInStripperPlate() - Method in interface nxopen.tooling.PunchInsertBuilder
-
Returns the punch pocket type in stripper plate.
- punchPosition() - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder
-
Returns the distance value to move punch.
- PunchProfileAttributesData() - Constructor for class nxopen.die.DrawDiePunchSectionBuilder.PunchProfileAttributesData
-
- PunchProfileData() - Constructor for class nxopen.die.DrawDiePunchBuilder.PunchProfileData
-
- punchRadius() - Method in interface nxopen.die.PierceItemBuilder
-
Returns the punch radius
License requirements: None.
- punchRadius() - Method in interface nxopen.features.sheetmetal.BeadBuilder
-
Returns the bead punch radius.
- punchRadius() - Method in interface nxopen.features.sheetmetal.GussetBuilder
-
Returns the punch radius value
The application of the punch radius has changed from NX10 onwards, to ensure material thickness is constant in the gusset.
- punchRadius() - Method in interface nxopen.features.sheetmetal.SolidPunchBuilder
-
Returns the Radius value of the sharp edges on the top face
License requirements: None.
- punchRadius - Variable in class nxopen.uf.UFModl.SmpunchData
-
- punchSameOffsetValue() - Method in interface nxopen.tooling.PiercingInsertBuilder
-
Returns the same offset value option of punch design.
- punchSameOffsetValue() - Method in interface nxopen.tooling.PunchInsertBuilder
-
Returns the same offset value option of punch design.
- punchShankFace() - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
Returns the punch shank.
- punchShankParaC() - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
Returns the punch shank parameter for clearance between true body and false body.
- punchShankParaFL() - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
Returns the punch shank parameter false body height.
- punchShankParaL1() - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
Returns the punch shank parameter for true body and false body length.
- punchShankParaLength() - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
Returns the punch shank parameter length.
- punchShankParaPL() - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
Returns the punch shank parameter for true body height.
- punchShankParaR() - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
Returns the punch shank parameter for true body radius.
- punchShankParaWidth() - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
Returns the punch shank parameter width.
- punchSheet() - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder
-
Returns the punch sheet.
- punchToolId() - Method in interface nxopen.features.sheetmetal.BendOptions
-
Returns the punch tool id selected
License requirements: None.
- punchToolIdName() - Method in interface nxopen.features.sheetmetal.BendOptions
-
Returns the punch tool id string selected
License requirements: None.
- punchType - Variable in class nxopen.uf.UFModl.SmpunchData
-
- punchWidth() - Method in interface nxopen.die.PierceItemBuilder
-
Returns the punch width
License requirements: None.
- PURE_WHITE - Static variable in class nxopen.display.TrueShadingBuilder.BgdType
-
Plain light Colored background
- PURPLE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- purpose() - Method in interface nxopen.motion.MechatronicsBuilder
-
Returns the purpose of the mechatronics element - possible values are Import, Export
License requirements: mechanisms ("MECHANISMS")
.
- PUSH - Static variable in class nxopen.uf.UFUi.MenuType
-
- PUSH_BUTTON - Static variable in class nxopen.menubar.ContextMenuEntry.Type
-
Has a command that is run when this entry is activated.
- PUSH_BUTTON - Static variable in class nxopen.menubar.MenuButton.Type
-
- PUSH_BUTTON - Static variable in class nxopen.uistyler.Dialog.ItemType
-
- pushAreas(double[]) - Method in interface nxopen.userdefinedobjects.UserDefinedObject
-
Add the specified areas to the end of the area array for this UDO
License requirements: None.
- PushButton - Interface in nxopen.uistyler
-
Represents a PushButton for UI Styler .
- PushButton.Activate - Interface in nxopen.uistyler
-
Called when a dialog user clicks on the push button or presses the spacebar when the push button has
keyboard focus.
- pushContext(String) - Method in interface nxopen.uf.UFHelp
-
- pushDoubles(double[]) - Method in interface nxopen.userdefinedobjects.UserDefinedObject
-
Add the specified doubles to the end of the double array for this UDO
License requirements: None.
- PUSHEDFROM_TEAMCENTER - Static variable in class nxopen.pdm.ConfigurationContextBuilder.ConfigContextType
-
- PUSHER - Static variable in class nxopen.linedesigner.ConveyorStationFeatureBuilder.Type
-
- pushIntegers(int[]) - Method in interface nxopen.userdefinedobjects.UserDefinedObject
-
Add the specified integers to the end of the integer array for this UDO
License requirements: None.
- pushLengths(double[]) - Method in interface nxopen.userdefinedobjects.UserDefinedObject
-
Add the specified lengths to the end of the length array for this UDO
License requirements: None.
- pushLinks(UserDefinedObject.LinkType, UserDefinedObject.LinkDefinition[]) - Method in interface nxopen.userdefinedobjects.UserDefinedObject
-
Add the specified links to the end of the given link type's link array for this UDO
License requirements: None.
- pushPrimaryContext(String) - Method in interface nxopen.uf.UFHelp
-
- pushStrings(String[]) - Method in interface nxopen.userdefinedobjects.UserDefinedObject
-
Add the specified strings to the end of the string array for this UDO
License requirements: None.
- pushVolumes(double[]) - Method in interface nxopen.userdefinedobjects.UserDefinedObject
-
Add the specified volumes to the end of the volume array for this UDO
License requirements: None.
- putExpressionValue(Expression) - Method in interface nxopen.mechatronics.GanttOperationConditionBuilder
-
Set the expression value for double and interger parameters
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- putExpressionValue(Expression) - Method in interface nxopen.mechatronics.GanttOperationParameterBuilder
-
Set the expression value for double and interger parameters
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- putListItem(Tag[], Tag) - Method in interface nxopen.uf.UFModlGeneral
-
- putSheetsInStlFile(UFVariant, Tag, int, Tag[], double, double, double, double) - Method in interface nxopen.uf.UFStd
-
- PutSheetsInStlFileData() - Constructor for class nxopen.uf.UFStd.PutSheetsInStlFileData
-
- putSolidInStlFile(UFVariant, Tag, Tag, double, double, double) - Method in interface nxopen.uf.UFStd
-
- PutSolidInStlFileData() - Constructor for class nxopen.uf.UFStd.PutSolidInStlFileData
-
- PV_EXPORT_VFM - Static variable in class nxopen.uf.UFMotion.PvExportType
-
- PV_EXPORT_VFM_AND_JT - Static variable in class nxopen.uf.UFMotion.PvExportType
-
- pviewTag - Variable in class nxopen.uf.UFDraw.AskFoldedSxlineData
-
- pviewTag - Variable in class nxopen.uf.UFDraw.AskHalfSxlineData
-
- pviewTag - Variable in class nxopen.uf.UFDraw.AskRevolvedSxlineData
-
- pviewTag - Variable in class nxopen.uf.UFDraw.AskSimpleSxlineData
-
- pviewTag - Variable in class nxopen.uf.UFDraw.AskSteppedSxlineData
-
- pviewTag - Variable in class nxopen.uf.UFDraw.AskUnfoldedSxlineData
-
- PVISC - Static variable in class nxopen.cae.ModelUpdateDesignVariablesRapidCreateBuilder.PhysicalTypesEnum
-
- PvtransManager - Interface in nxopen
-
The PvtransManager class provides methods to create Pvtrans Builder objects.
- pvtransManager() - Method in interface nxopen.Session
-
Returns the
PvtransManager
belonging to this session
Created in NX8.5.0
- PXDIR - Static variable in class nxopen.cam.InspectionAlignmentAssistantBuilder.Direction
-
Positive X alignment direction
- PXDIR - Static variable in class nxopen.cam.InspectionAlignmentBuilder.AlignmentDirections
-
Align feature in the positive X direction
- PXDIR - Static variable in class nxopen.cam.InspectionAlignmentBuilder.RotationDirections
-
Rotate in the positive X direction
- PYDIR - Static variable in class nxopen.cam.InspectionAlignmentAssistantBuilder.Direction
-
Positive Y alignment direction
- PYDIR - Static variable in class nxopen.cam.InspectionAlignmentBuilder.AlignmentDirections
-
Align feature in the positive Y direction
- PYDIR - Static variable in class nxopen.cam.InspectionAlignmentBuilder.RotationDirections
-
Rotate in the positive Y direction
- PYR - Static variable in class nxopen.cae.ElementTypes.Shape
-
Pyramid
- PYR13 - Static variable in class nxopen.uf.UFSf.ElementType
-
- PYR5 - Static variable in class nxopen.uf.UFSf.ElementType
-
- PYR9 - Static variable in class nxopen.uf.UFSf.ElementType
-
- PYR_MIXED_ORDER - Static variable in class nxopen.uf.UFSf.ElementType
-
- PYRAMID - Static variable in class nxopen.cae.ElementTypeBuilder.ElementType
-
Pyramid
- PYTHON - Static variable in class nxopen.preferences.SessionUserInterface.JournalLanguageType
-
- PYTHON - Static variable in class nxopen.report.ProgramInformation.LanguageType
-
Python language
- PZDIR - Static variable in class nxopen.cam.InspectionAlignmentAssistantBuilder.Direction
-
Positive Z alignment direction
- PZDIR - Static variable in class nxopen.cam.InspectionAlignmentBuilder.AlignmentDirections
-
Align feature in the positive Z direction
- PZDIR - Static variable in class nxopen.cam.InspectionAlignmentBuilder.RotationDirections
-
Rotate in the positive Z direction