public interface HolePackageBuilder extends FeatureBuilder
HolePackage
builder.
Inputs to this class can be convergent objects. FeatureCollection.createHolePackageBuilder(nxopen.features.HolePackage)
Property | Value |
---|---|
BooleanOperation.Type | Subtract |
DepthOption | ToCylinderBottom |
DrillSizeEndChamferAngle.Value | 45.0 (millimeters part), 45.0 (inches part) |
DrillSizeEndChamferEnabled | true |
DrillSizeEndChamferOffset.Value | 0.6 (millimeters part), 0.024 (inches part) |
DrillSizeHoleDepth.Value | 50.0 (millimeters part), 2.0 (inches part) |
DrillSizeHoleDiameter.Value | 11.0 (millimeters part), 0.4 (inches part) |
DrillSizeStartChamferAngle.Value | 45.0 (millimeters part), 45.0 (inches part) |
DrillSizeStartChamferEnabled | true |
DrillSizeStartChamferOffset.Value | 0.6 (millimeters part), 0.024 (inches part) |
DrillSizeTipAngle.Value | 118 |
EndHoleData.BooleanOperation.Type | Subtract |
EndHoleData.DepthOption | ToCylinderBottom |
EndHoleData.HoleDepth.Value | 50.0 (millimeters part), 2.0 (inches part) |
EndHoleData.HoleDiameter.Value | 25.0 (millimeters part), 1.0 (inches part) |
EndHoleData.MatchDimOfStartHole | true |
EndHoleData.ScrewClearanceEndChamferAngle.Value | 45.0 (millimeters part), 45.0 (inches part) |
EndHoleData.ScrewClearanceEndChamferOffset.Value | 0.6 (millimeters part), 0.024 (inches part) |
EndHoleData.ScrewClearanceStartChamferAngle.Value | 45.0 (millimeters part), 45.0 (inches part) |
EndHoleData.ScrewClearanceStartChamferOffset.Value | 0.6 (millimeters part), 0.024 (inches part) |
EndHoleData.TapDrillDiameter.Value | 8.5 (millimeters part), 0.34 (inches part) |
EndHoleData.ThreadDepth.Value | 25.0 (millimeters part), 1.0 (inches part) |
EndHoleData.ThreadLengthOption | Custom |
EndHoleData.ThreadedEndChamferAngle.Value | 45.0 (millimeters part), 45.0 (inches part) |
EndHoleData.ThreadedEndChamferDiameter.Value | 10.0 (millimeters part), 0.4 (inches part) |
EndHoleData.ThreadedReliefAngle.Value | 118.0 (millimeters part), 118.0 (inches part) |
EndHoleData.ThreadedReliefChamferAngle.Value | 45.0 (millimeters part), 45.0 (inches part) |
EndHoleData.ThreadedReliefChamferOffset.Value | 0.6 (millimeters part), 0.024 (inches part) |
EndHoleData.ThreadedReliefDepth.Value | 5.0 (millimeters part), 0.2 (inches part) |
EndHoleData.ThreadedReliefDiameter.Value | 10.0 (millimeters part), 0.4 (inches part) |
EndHoleData.ThreadedStartChamferAngle.Value | 45.0 (millimeters part), 45.0 (inches part) |
EndHoleData.ThreadedStartChamferDiameter.Value | 10.0 (millimeters part), 0.4 (inches part) |
EndHoleData.TipAngle.Value | 118 |
GeneralCounterboreDepth.Value | 25.0 (millimeters part), 1.0 (inches part) |
GeneralCounterboreDiameter.Value | 38.0 (millimeters part), 1.5 (inches part) |
GeneralCounterboreHoleDepth.Value | 50.0 (millimeters part), 2.0 (inches part) |
GeneralCounterboreHoleDiameter.Value | 25.0 (millimeters part), 1.0 (inches part) |
GeneralCountersinkAngle.Value | 90 (millimeters part), 82 (inches part) |
GeneralCountersinkDiameter.Value | 50.0 (millimeters part), 2.0 (inches part) |
GeneralCountersinkHoleDepth.Value | 50.0 (millimeters part), 2.0 (inches part) |
GeneralCountersinkHoleDiameter.Value | 25.0 (millimeters part), 1.0 (inches part) |
GeneralHoleForm | Simple |
GeneralSimpleHoleDepth.Value | 50.0 (millimeters part), 2.0 (inches part) |
GeneralSimpleHoleDiameter.Value | 25.0 (millimeters part), 1.0 (inches part) |
GeneralTaperAngle.Value | 10 |
GeneralTaperedHoleDepth.Value | 50.0 (millimeters part), 2.0 (inches part) |
GeneralTaperedHoleDiameter.Value | 25.0 (millimeters part), 1.0 (inches part) |
GeneralTipAngle.Value | 118 (millimeters part), 118 (inches part) |
MiddleHoleData.BooleanOperation.Type | Subtract |
MiddleHoleData.EndChamferAngle.Value | 45.0 (millimeters part), 45.0 (inches part) |
MiddleHoleData.EndChamferOffset.Value | 0.6 (millimeters part), 0.024 (inches part) |
MiddleHoleData.HoleDiameter.Value | 25.0 (millimeters part), 1.0 (inches part) |
MiddleHoleData.MatchDimOfStartHole | true |
MiddleHoleData.StartChamferAngle.Value | 45.0 (millimeters part), 45.0 (inches part) |
MiddleHoleData.StartChamferOffset.Value | 0.6 (millimeters part), 0.024 (inches part) |
ScrewClearanceCounterboreDepth.Value | 10.8 (millimeters part), 0.43 (inches part) |
ScrewClearanceCounterboreDiameter.Value | 18.0 (millimeters part), 0.72 (inches part) |
ScrewClearanceCountersinkAngle.Value | 90 (millimeters part), 82 (inches part) |
ScrewClearanceCountersinkDiameter.Value | 22.73 (millimeters part), 0.91 (inches part) |
ScrewClearanceEndChamferAngle.Value | 45.0 (millimeters part), 45.0 (inches part) |
ScrewClearanceEndChamferOffset.Value | 0.6 (millimeters part), 0.024 (inches part) |
ScrewClearanceHoleDepth.Value | 50.0 (millimeters part), 2.0 (inches part) |
ScrewClearanceHoleDiameter.Value | 11.0 (millimeters part), 0.4 (inches part) |
ScrewClearanceHoleForm | Simple |
ScrewClearanceNeckChamferAngle.Value | 45.0 (millimeters part), 45.0 (inches part) |
ScrewClearanceNeckChamferOffset.Value | 0.6 (millimeters part), 0.024 (inches part) |
ScrewClearanceReliefDepth.Value | 1.2 (millimeters part), 0.05 (inches part) |
ScrewClearanceStartChamferAngle.Value | 45.0 (millimeters part), 45.0 (inches part) |
ScrewClearanceStartChamferOffset.Value | 0.6 (millimeters part), 0.024 (inches part) |
ScrewClearanceTipAngle.Value | 118 |
StartExtensionEnabled | True |
StartHoleData.BooleanOperation.Type | Subtract |
StartHoleData.CounterboreDepth.Value | 25.0 (millimeters part), 1.0 (inches part) |
StartHoleData.CounterboreDiameter.Value | 38.0 (millimeters part), 1.5 (inches part) |
StartHoleData.CountersinkAngle.Value | 90 (millimeters part), 82 (inches part) |
StartHoleData.CountersinkDiameter.Value | 50.0 (millimeters part), 2.0 (inches part) |
StartHoleData.EndChamferAngle.Value | 45.0 (millimeters part), 45.0 (inches part) |
StartHoleData.EndChamferOffset.Value | 0.6 (millimeters part), 0.024 (inches part) |
StartHoleData.HoleDiameter.Value | 25.0 (millimeters part), 1.0 (inches part) |
StartHoleData.HoleForm | Simple |
StartHoleData.NeckChamferAngle.Value | 45.0 (millimeters part), 45.0 (inches part) |
StartHoleData.NeckChamferOffset.Value | 0.6 (millimeters part), 0.024 (inches part) |
StartHoleData.ReliefDepth.Value | 1.2 (millimeters part), 0.05 (inches part) |
StartHoleData.StartChamferAngle.Value | 45.0 (millimeters part), 45.0 (inches part) |
StartHoleData.StartChamferOffset.Value | 0.6 (millimeters part), 0.024 (inches part) |
TapDrillDiameter.Value | 8.5 (millimeters part), 0.34 (inches part) |
ThreadDepth.Value | 25.0 (millimeters part), 1.0 (inches part) |
ThreadLengthOption | Custom |
ThreadRotation | Right |
ThreadedEndChamferAngle.Value | 45.0 (millimeters part), 45.0 (inches part) |
ThreadedEndChamferDiameter.Value | 10.0 (millimeters part), 0.4 (inches part) |
ThreadedHoleDepth.Value | 50.0 (millimeters part), 2.0 (inches part) |
ThreadedReliefAngle.Value | 118.0 (millimeters part), 118.0 (inches part) |
ThreadedReliefChamferAngle.Value | 45.0 (millimeters part), 45.0 (inches part) |
ThreadedReliefChamferOffset.Value | 0.6 (millimeters part), 0.024 (inches part) |
ThreadedReliefDepth.Value | 5.0 (millimeters part), 0.2 (inches part) |
ThreadedReliefDiameter.Value | 10.0 (millimeters part), 0.4 (inches part) |
ThreadedStartChamferAngle.Value | 45.0 (millimeters part), 45.0 (inches part) |
ThreadedStartChamferDiameter.Value | 10.0 (millimeters part), 0.4 (inches part) |
ThreadedTipAngle.Value | 118 (millimeters part), 118 (inches part) |
Type | GeneralHole |
Modifier and Type | Interface and Description |
---|---|
static class |
HolePackageBuilder.HoleDepthLimitOptions
Represents hole depth limit options.
|
static class |
HolePackageBuilder.HoleDepthOptions
Represents hole depth specification options.
|
static class |
HolePackageBuilder.HoleForms
Represents hole form options.
|
static class |
HolePackageBuilder.ThreadLengthOptions
Represents thread length options.
|
static class |
HolePackageBuilder.ThreadRotationOptions
Represents thread rotation options.
|
static class |
HolePackageBuilder.Types
Represents hole types.
|
Modifier and Type | Method and Description |
---|---|
BooleanOperation |
booleanOperation()
Returns the boolean operation
License requirements: None. |
HolePackageBuilder.HoleDepthOptions |
depthOption()
Returns the hole depth option
License requirements: None. |
String |
drillSize()
Returns the drill size - this is applicable for drill size hole
License requirements: None. |
Expression |
drillSizeEndChamferAngle()
Returns the drill size end chamfer angle - this is applicable for drill size hole type
License requirements: None. |
boolean |
drillSizeEndChamferEnabled()
Returns the drill size end chamfer enabled - this is applicable for drill size hole type
License requirements: None. |
Expression |
drillSizeEndChamferOffset()
Returns the drill size end chamfer offset - this is applicable for drill size hole type
License requirements: None. |
String |
drillSizeFitOption()
Returns the drill size screw fit Option - this is applicable for drill size hole
License requirements: None. |
Expression |
drillSizeHoleDepth()
Returns the hole depth - this is applicable for drill size hole
License requirements: None. |
Expression |
drillSizeHoleDiameter()
Returns the hole diameter - this is applicable for drill size hole
License requirements: None. |
String |
drillSizeStandard()
Returns the drill size standard - this is applicable for drill size hole type
License requirements: None. |
Expression |
drillSizeStartChamferAngle()
Returns the drill size start chamfer angle - this is applicable for drill size hole type
License requirements: None. |
boolean |
drillSizeStartChamferEnabled()
Returns the drill size start chamfer enabled - this is applicable for drill size hole type
License requirements: None. |
Expression |
drillSizeStartChamferOffset()
Returns the drill size start chamfer offset - this is applicable for drill size hole type
License requirements: None. |
Expression |
drillSizeTipAngle()
Returns the tip angle - this is applicable for drill size hole
License requirements: None. |
EndHoleData |
endHoleData()
Returns the target body
License requirements: None. |
Expression |
generalCounterboreDepth()
Returns the counter bore depth - this is applicable for general hole
License requirements: None. |
Expression |
generalCounterboreDiameter()
Returns the counter bore diameter - this is applicable for general hole
License requirements: None. |
Expression |
generalCounterboreHoleDepth()
Returns the counterbore hole depth - this is applicable for general hole counterbore form
License requirements: None. |
Expression |
generalCounterboreHoleDiameter()
Returns the counterbore hole diameter - this is applicable for general hole counterbore form
License requirements: None. |
Expression |
generalCountersinkAngle()
Returns the counter sink angle - this is applicable for general hole
License requirements: None. |
Expression |
generalCountersinkDiameter()
Returns the counter sink diameter - this is applicable for general hole
License requirements: None. |
Expression |
generalCountersinkHoleDepth()
Returns the countersink hole depth - this is applicable for general hole countersink form
License requirements: None. |
Expression |
generalCountersinkHoleDiameter()
Returns the countersink hole diameter - this is applicable for general hole countersink form
License requirements: None. |
HolePackageBuilder.HoleForms |
generalHoleForm()
Returns the hole form - this is applicable for general hole
License requirements: None. |
Expression |
generalSimpleHoleDepth()
Returns the simple hole depth - this is applicable for general hole simple form
License requirements: None. |
Expression |
generalSimpleHoleDiameter()
Returns the simple hole diameter - this is applicable for general hole simple form
License requirements: None. |
Expression |
generalTaperAngle()
Returns the taper angle - this is applicable for general hole
License requirements: None. |
Expression |
generalTaperedHoleDepth()
Returns the tapered hole depth - this is applicable for general hole tapered form
License requirements: None. |
Expression |
generalTaperedHoleDiameter()
Returns the tapered hole diameter - this is applicable for general hole tapered form
License requirements: None. |
Expression |
generalTipAngle()
Returns the tip angle - this is applicable for general hole
License requirements: None. |
HolePackageBuilder.HoleDepthLimitOptions |
holeDepthLimitOption()
Returns the hole depth limit - this is applicable for general hole, threaded hole and drill size hole type
License requirements: None. |
Section |
holePosition()
Returns the hole position
License requirements: None. |
MiddleHoleData |
middleHoleData()
Returns the target body
License requirements: None. |
boolean |
neckChamferEnabled()
Returns the neck chamfer enabled - this is applicable for screw clearence hole type
with counterbore hole form
License requirements: None. |
ProjectionOptions |
projectionDirection()
Returns the hole direction options
License requirements: None. |
String |
radialEngageOption()
Returns the radial engage option - this is applicable for screw clearence hole
License requirements: None. |
boolean |
reliefChamferEnabled()
Returns the threaded relief chamfer enabled - this is applicable for threaded hole type
License requirements: None. |
Expression |
screwClearanceCounterboreDepth()
Returns the counter bore depth - this is applicable for screw clearence hole
License requirements: None. |
Expression |
screwClearanceCounterboreDiameter()
Returns the counter bore diameter - this is applicable for screw clearence hole
License requirements: None. |
Expression |
screwClearanceCountersinkAngle()
Returns the counter sink angle - this is applicable for screw clearence hole
License requirements: None. |
Expression |
screwClearanceCountersinkDiameter()
Returns the counter sink diameter - this is applicable for screw clearence hole
License requirements: None. |
Expression |
screwClearanceEndChamferAngle()
Returns the screw clearance end chamfer angle - this is applicable for screw clearance hole type
License requirements: None. |
boolean |
screwClearanceEndChamferEnabled()
Returns the end chamfer enabled - this is applicable for screw clearance hole type
License requirements: None. |
Expression |
screwClearanceEndChamferOffset()
Returns the screw clearance end chamfer offset - this is applicable for screw clearance hole type
License requirements: None. |
Expression |
screwClearanceHoleDepth()
Returns the hole depth - this is applicable for screw clearance hole
License requirements: None. |
Expression |
screwClearanceHoleDiameter()
Returns the hole diameter - this is applicable for screw clearence hole
License requirements: None. |
HolePackageBuilder.HoleForms |
screwClearanceHoleForm()
Returns the hole form - this is applicable for screw clearance hole
License requirements: None. |
Expression |
screwClearanceNeckChamferAngle()
Returns the neck chamfer angle - this is applicable for screw clearence hole type
with counterbore hole form
License requirements: None. |
Expression |
screwClearanceNeckChamferOffset()
Returns the neck chamfer offset - this is applicable for screw clearence hole type
with counterbore hole form
License requirements: None. |
Expression |
screwClearanceReliefDepth()
Returns the relief depth - this is applicable for screw clearence hole type
License requirements: None. |
boolean |
screwClearanceReliefEnabled()
Returns the relief enabled - this is applicable for screw clearence hole type with
countersunk hole form and threaded hole type
License requirements: None. |
Expression |
screwClearanceStartChamferAngle()
Returns the screw clearance start chamfer angle - this is applicable for screw clearance hole type
License requirements: None. |
boolean |
screwClearanceStartChamferEnabled()
Returns the screw clearance start chamfer enabled - this is applicable for screw clearance hole type
License requirements: None. |
Expression |
screwClearanceStartChamferOffset()
Returns the screw clearance start chamfer offset - this is applicable for screw clearance hole type
License requirements: None. |
Expression |
screwClearanceTipAngle()
Returns the tip angle - this is applicable for screw clearance hole
License requirements: None. |
String |
screwFitOption()
Returns the screw fit Option - this is applicable for screw clearence hole
License requirements: None. |
String |
screwSize()
Returns the screw size - this is applicable for screw clearence hole
License requirements: None. |
String |
screwStandard()
Returns the screw standard - this is applicable for screw clearence hole type
License requirements: None. |
String |
screwType()
Returns the screw type - this is applicable for screw clearence hole
License requirements: None. |
void |
setDepthOption(HolePackageBuilder.HoleDepthOptions depthOption)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
setDrillSize(String drillSize)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
setDrillSizeEndChamferEnabled(boolean drillSizeEndChamferEnabled)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
setDrillSizeFitOption(String drillSizeFitOption)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
setDrillSizeStandard(String drillSizeStandard)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
setDrillSizeStartChamferEnabled(boolean drillSizeStartChamferEnabled)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
setGeneralHoleForm(HolePackageBuilder.HoleForms holeForm)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
setHoleDepthLimitOption(HolePackageBuilder.HoleDepthLimitOptions holeDepthLimitOption)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
setNeckChamferEnabled(boolean neckChamferEnabled)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
setRadialEngageOption(String radialEngageOption)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
setReliefChamferEnabled(boolean reliefChamferEnabled)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
setScrewClearanceEndChamferEnabled(boolean screwClearanceEndChamferEnabled)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
setScrewClearanceHoleForm(HolePackageBuilder.HoleForms holeForm)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
setScrewClearanceReliefEnabled(boolean screwClearanceReliefEnabled)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
setScrewClearanceStartChamferEnabled(boolean screwClearanceStartChamferEnabled)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
setScrewFitOption(String screwFitOption)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
setScrewSize(String screwSize)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
setScrewStandard(String screwStandard)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
setScrewType(String screwType)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
setStartExtensionEnabled(boolean startExtensionEnabled)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
setThreadedEndChamferEnabled(boolean threadedEndChamferEnabled)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
setThreadedReliefEnabled(boolean threadedReliefEnabled)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
setThreadedStartChamferEnabled(boolean threadedStartChamferEnabled)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
setThreadLengthOption(HolePackageBuilder.ThreadLengthOptions threadLengthOption)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
setThreadRotation(HolePackageBuilder.ThreadRotationOptions threadRotation)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
setThreadSize(String threadSize)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
setThreadStandard(String threadStandard)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
setTolerance(double tolerance)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
setType(HolePackageBuilder.Types type)
License requirements: solid_modeling ("SOLIDS MODELING") . |
boolean |
startExtensionEnabled()
Returns the extend start enabled - this is applicable for start extension to all hole types
License requirements: None. |
StartHoleData |
startHoleData()
Returns the start target body
License requirements: None. |
Expression |
tapDrillDiameter()
Returns the tap drill diameter - this is applicable for threaded hole
License requirements: None. |
Expression |
threadDepth()
Returns the thread depth - this is applicable for threaded hole
License requirements: None. |
Expression |
threadedEndChamferAngle()
Returns the threaded end chamfer angle - this is applicable for threaded hole type
License requirements: None. |
Expression |
threadedEndChamferDiameter()
Returns the threaded end chamfer offset - this is applicable for threaded hole type
License requirements: None. |
boolean |
threadedEndChamferEnabled()
Returns the threaded end chamfer enabled - this is applicable for threaded hole type
License requirements: None. |
Expression |
threadedHoleDepth()
Returns the hole depth - this is applicable for threaded hole
License requirements: None. |
Expression |
threadedReliefAngle()
Returns the relief angle - this is applicable for threaded hole type
License requirements: None. |
Expression |
threadedReliefChamferAngle()
Returns the threaded relief chamfer angle - this is applicable for threaded hole type
License requirements: None. |
Expression |
threadedReliefChamferOffset()
Returns the threaded relief chamfer offset - this is applicable for threaded hole type
License requirements: None. |
Expression |
threadedReliefDepth()
Returns the threaded relief depth - this is applicable for threaded hole type
License requirements: None. |
Expression |
threadedReliefDiameter()
Returns the relief diameter - this is applicable for threaded hole type
License requirements: None. |
boolean |
threadedReliefEnabled()
Returns the threaded relief enabled - this is applicable for threaded hole type
License requirements: None. |
Expression |
threadedStartChamferAngle()
Returns the threaded start chamfer angle - this is applicable for threaded hole type
License requirements: None. |
Expression |
threadedStartChamferDiameter()
Returns the threaded start chamfer offset - this is applicable for threaded hole type
License requirements: None. |
boolean |
threadedStartChamferEnabled()
Returns the threaded start chamfer enabled - this is applicable for threaded hole type
License requirements: None. |
Expression |
threadedTipAngle()
Returns the tip angle - this is applicable for threaded hole
License requirements: None. |
HolePackageBuilder.ThreadLengthOptions |
threadLengthOption()
Returns the thread length option - this is applicable for threaded hole
License requirements: None. |
HolePackageBuilder.ThreadRotationOptions |
threadRotation()
Returns the thread rotation - this is applicable for threaded hole
License requirements: None. |
String |
threadSize()
Returns the thread size - this is applicable for threaded hole
License requirements: None. |
String |
threadStandard()
Returns the thread standard - this is applicable for threaded hole type
License requirements: None. |
double |
tolerance()
Returns the distance tolerance
License requirements: None. |
HolePackageBuilder.Types |
type()
Returns the type
License requirements: None. |
SelectDisplayableObject |
untilSelectedTarget()
Returns the until selected target - this is applicable for general hole, threaded hole and drill size hole type
License requirements: None. |
commitFeature, getFeature, hideInternalParentFeatureAfterEdit, parentFeatureInternal, patchSolutionFlag, patchSurfaceFilename, setParentFeatureInternal, setParentFeatureInternal, setPatchSolutionFlag, setPatchSurfaceFilename, setSurroundingPatchSurfaceFilename, showInternalParentFeatureForEdit, surroundingPatchSurfaceFilename, unsetParentFeatureInternal
commit, destroy, getCommittedObjects, getObject, showResults
printTestData, printTestData, tag, tagValue
validate
HolePackageBuilder.Types type() throws NXException, RemoteException
NXException
RemoteException
void setType(HolePackageBuilder.Types type) throws NXException, RemoteException
type
- NXException
RemoteException
Section holePosition() throws NXException, RemoteException
NXException
RemoteException
String threadSize() throws NXException, RemoteException
NXException
RemoteException
void setThreadSize(String threadSize) throws NXException, RemoteException
threadSize
- NXException
RemoteException
Expression tapDrillDiameter() throws NXException, RemoteException
NXException
RemoteException
HolePackageBuilder.ThreadLengthOptions threadLengthOption() throws NXException, RemoteException
NXException
RemoteException
void setThreadLengthOption(HolePackageBuilder.ThreadLengthOptions threadLengthOption) throws NXException, RemoteException
threadLengthOption
- NXException
RemoteException
Expression threadDepth() throws NXException, RemoteException
NXException
RemoteException
HolePackageBuilder.ThreadRotationOptions threadRotation() throws NXException, RemoteException
NXException
RemoteException
void setThreadRotation(HolePackageBuilder.ThreadRotationOptions threadRotation) throws NXException, RemoteException
threadRotation
- NXException
RemoteException
HolePackageBuilder.HoleForms generalHoleForm() throws NXException, RemoteException
NXException
RemoteException
void setGeneralHoleForm(HolePackageBuilder.HoleForms holeForm) throws NXException, RemoteException
holeForm
- NXException
RemoteException
HolePackageBuilder.HoleForms screwClearanceHoleForm() throws NXException, RemoteException
NXException
RemoteException
void setScrewClearanceHoleForm(HolePackageBuilder.HoleForms holeForm) throws NXException, RemoteException
holeForm
- NXException
RemoteException
ProjectionOptions projectionDirection() throws NXException, RemoteException
NXException
RemoteException
String screwType() throws NXException, RemoteException
NXException
RemoteException
void setScrewType(String screwType) throws NXException, RemoteException
screwType
- NXException
RemoteException
String screwSize() throws NXException, RemoteException
NXException
RemoteException
void setScrewSize(String screwSize) throws NXException, RemoteException
screwSize
- NXException
RemoteException
String screwFitOption() throws NXException, RemoteException
NXException
RemoteException
void setScrewFitOption(String screwFitOption) throws NXException, RemoteException
screwFitOption
- NXException
RemoteException
String drillSize() throws NXException, RemoteException
NXException
RemoteException
void setDrillSize(String drillSize) throws NXException, RemoteException
drillSize
- NXException
RemoteException
String drillSizeFitOption() throws NXException, RemoteException
NXException
RemoteException
void setDrillSizeFitOption(String drillSizeFitOption) throws NXException, RemoteException
drillSizeFitOption
- NXException
RemoteException
String radialEngageOption() throws NXException, RemoteException
NXException
RemoteException
void setRadialEngageOption(String radialEngageOption) throws NXException, RemoteException
radialEngageOption
- NXException
RemoteException
Expression generalCounterboreDiameter() throws NXException, RemoteException
NXException
RemoteException
Expression generalCounterboreDepth() throws NXException, RemoteException
NXException
RemoteException
Expression generalCountersinkDiameter() throws NXException, RemoteException
NXException
RemoteException
Expression generalCountersinkAngle() throws NXException, RemoteException
NXException
RemoteException
Expression generalSimpleHoleDiameter() throws NXException, RemoteException
NXException
RemoteException
Expression generalCounterboreHoleDiameter() throws NXException, RemoteException
NXException
RemoteException
Expression generalCountersinkHoleDiameter() throws NXException, RemoteException
NXException
RemoteException
Expression generalTaperedHoleDiameter() throws NXException, RemoteException
NXException
RemoteException
Expression screwClearanceCounterboreDiameter() throws NXException, RemoteException
NXException
RemoteException
Expression screwClearanceCounterboreDepth() throws NXException, RemoteException
NXException
RemoteException
Expression screwClearanceCountersinkDiameter() throws NXException, RemoteException
NXException
RemoteException
Expression screwClearanceCountersinkAngle() throws NXException, RemoteException
NXException
RemoteException
Expression drillSizeHoleDiameter() throws NXException, RemoteException
NXException
RemoteException
Expression drillSizeHoleDepth() throws NXException, RemoteException
NXException
RemoteException
Expression drillSizeTipAngle() throws NXException, RemoteException
NXException
RemoteException
Expression screwClearanceHoleDiameter() throws NXException, RemoteException
NXException
RemoteException
HolePackageBuilder.HoleDepthLimitOptions holeDepthLimitOption() throws NXException, RemoteException
NXException
RemoteException
void setHoleDepthLimitOption(HolePackageBuilder.HoleDepthLimitOptions holeDepthLimitOption) throws NXException, RemoteException
holeDepthLimitOption
- NXException
RemoteException
SelectDisplayableObject untilSelectedTarget() throws NXException, RemoteException
NXException
RemoteException
Expression generalSimpleHoleDepth() throws NXException, RemoteException
NXException
RemoteException
Expression generalCounterboreHoleDepth() throws NXException, RemoteException
NXException
RemoteException
Expression generalCountersinkHoleDepth() throws NXException, RemoteException
NXException
RemoteException
Expression generalTaperedHoleDepth() throws NXException, RemoteException
NXException
RemoteException
Expression generalTipAngle() throws NXException, RemoteException
NXException
RemoteException
Expression generalTaperAngle() throws NXException, RemoteException
NXException
RemoteException
Expression screwClearanceHoleDepth() throws NXException, RemoteException
NXException
RemoteException
Expression screwClearanceTipAngle() throws NXException, RemoteException
NXException
RemoteException
Expression threadedHoleDepth() throws NXException, RemoteException
NXException
RemoteException
Expression threadedTipAngle() throws NXException, RemoteException
NXException
RemoteException
boolean screwClearanceReliefEnabled() throws NXException, RemoteException
NXException
RemoteException
void setScrewClearanceReliefEnabled(boolean screwClearanceReliefEnabled) throws NXException, RemoteException
screwClearanceReliefEnabled
- NXException
RemoteException
Expression screwClearanceReliefDepth() throws NXException, RemoteException
NXException
RemoteException
Expression threadedReliefDepth() throws NXException, RemoteException
NXException
RemoteException
boolean threadedReliefEnabled() throws NXException, RemoteException
NXException
RemoteException
void setThreadedReliefEnabled(boolean threadedReliefEnabled) throws NXException, RemoteException
threadedReliefEnabled
- NXException
RemoteException
Expression threadedReliefDiameter() throws NXException, RemoteException
NXException
RemoteException
Expression threadedReliefAngle() throws NXException, RemoteException
NXException
RemoteException
boolean reliefChamferEnabled() throws NXException, RemoteException
NXException
RemoteException
void setReliefChamferEnabled(boolean reliefChamferEnabled) throws NXException, RemoteException
reliefChamferEnabled
- NXException
RemoteException
Expression threadedReliefChamferOffset() throws NXException, RemoteException
NXException
RemoteException
Expression threadedReliefChamferAngle() throws NXException, RemoteException
NXException
RemoteException
boolean drillSizeStartChamferEnabled() throws NXException, RemoteException
NXException
RemoteException
void setDrillSizeStartChamferEnabled(boolean drillSizeStartChamferEnabled) throws NXException, RemoteException
drillSizeStartChamferEnabled
- NXException
RemoteException
Expression drillSizeStartChamferOffset() throws NXException, RemoteException
NXException
RemoteException
Expression drillSizeStartChamferAngle() throws NXException, RemoteException
NXException
RemoteException
boolean screwClearanceStartChamferEnabled() throws NXException, RemoteException
NXException
RemoteException
void setScrewClearanceStartChamferEnabled(boolean screwClearanceStartChamferEnabled) throws NXException, RemoteException
screwClearanceStartChamferEnabled
- NXException
RemoteException
Expression screwClearanceStartChamferOffset() throws NXException, RemoteException
NXException
RemoteException
Expression screwClearanceStartChamferAngle() throws NXException, RemoteException
NXException
RemoteException
boolean threadedStartChamferEnabled() throws NXException, RemoteException
NXException
RemoteException
void setThreadedStartChamferEnabled(boolean threadedStartChamferEnabled) throws NXException, RemoteException
threadedStartChamferEnabled
- NXException
RemoteException
Expression threadedStartChamferDiameter() throws NXException, RemoteException
NXException
RemoteException
Expression threadedStartChamferAngle() throws NXException, RemoteException
NXException
RemoteException
boolean drillSizeEndChamferEnabled() throws NXException, RemoteException
NXException
RemoteException
void setDrillSizeEndChamferEnabled(boolean drillSizeEndChamferEnabled) throws NXException, RemoteException
drillSizeEndChamferEnabled
- NXException
RemoteException
Expression drillSizeEndChamferOffset() throws NXException, RemoteException
NXException
RemoteException
Expression drillSizeEndChamferAngle() throws NXException, RemoteException
NXException
RemoteException
boolean screwClearanceEndChamferEnabled() throws NXException, RemoteException
NXException
RemoteException
void setScrewClearanceEndChamferEnabled(boolean screwClearanceEndChamferEnabled) throws NXException, RemoteException
screwClearanceEndChamferEnabled
- NXException
RemoteException
Expression screwClearanceEndChamferOffset() throws NXException, RemoteException
NXException
RemoteException
Expression screwClearanceEndChamferAngle() throws NXException, RemoteException
NXException
RemoteException
boolean threadedEndChamferEnabled() throws NXException, RemoteException
NXException
RemoteException
void setThreadedEndChamferEnabled(boolean threadedEndChamferEnabled) throws NXException, RemoteException
threadedEndChamferEnabled
- NXException
RemoteException
Expression threadedEndChamferDiameter() throws NXException, RemoteException
NXException
RemoteException
Expression threadedEndChamferAngle() throws NXException, RemoteException
NXException
RemoteException
boolean neckChamferEnabled() throws NXException, RemoteException
NXException
RemoteException
void setNeckChamferEnabled(boolean neckChamferEnabled) throws NXException, RemoteException
neckChamferEnabled
- NXException
RemoteException
Expression screwClearanceNeckChamferOffset() throws NXException, RemoteException
NXException
RemoteException
Expression screwClearanceNeckChamferAngle() throws NXException, RemoteException
NXException
RemoteException
BooleanOperation booleanOperation() throws NXException, RemoteException
NXException
RemoteException
String drillSizeStandard() throws NXException, RemoteException
NXException
RemoteException
void setDrillSizeStandard(String drillSizeStandard) throws NXException, RemoteException
drillSizeStandard
- NXException
RemoteException
String screwStandard() throws NXException, RemoteException
NXException
RemoteException
void setScrewStandard(String screwStandard) throws NXException, RemoteException
screwStandard
- NXException
RemoteException
String threadStandard() throws NXException, RemoteException
NXException
RemoteException
void setThreadStandard(String threadStandard) throws NXException, RemoteException
threadStandard
- NXException
RemoteException
double tolerance() throws NXException, RemoteException
NXException
RemoteException
void setTolerance(double tolerance) throws NXException, RemoteException
tolerance
- NXException
RemoteException
StartHoleData startHoleData() throws NXException, RemoteException
NXException
RemoteException
MiddleHoleData middleHoleData() throws NXException, RemoteException
NXException
RemoteException
EndHoleData endHoleData() throws NXException, RemoteException
NXException
RemoteException
boolean startExtensionEnabled() throws NXException, RemoteException
NXException
RemoteException
void setStartExtensionEnabled(boolean startExtensionEnabled) throws NXException, RemoteException
startExtensionEnabled
- NXException
RemoteException
void setDepthOption(HolePackageBuilder.HoleDepthOptions depthOption) throws NXException, RemoteException
depthOption
- NXException
RemoteException
HolePackageBuilder.HoleDepthOptions depthOption() throws NXException, RemoteException
NXException
RemoteException
Copyright 2017 Siemens Product Lifecycle Management Software Inc. All Rights Reserved.