public interface PostSelectionEntity extends TransientObject
Modifier and Type | Method and Description |
---|---|
void |
delete()
Deletes the selection entity.
|
int |
edgeId()
Returns the edge id selected
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") . |
int |
elemId()
Returns the elem label selected
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") . |
int |
faceId()
Returns the face id selected
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") . |
boolean |
hasEdge()
Tells if Edge is set
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") . |
boolean |
hasElem()
Tells if Element label is set
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") . |
boolean |
hasFace()
Tells if Face is set
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") . |
boolean |
hasNode()
Tells if Node label is set
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") . |
boolean |
hasPoint()
Tells if Point is set
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") . |
boolean |
hasRotationAngle()
Tells if Rotation Angle is set
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") . |
boolean |
hasSE()
Tells if Super Element id is set
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") . |
boolean |
hasSector()
Tells if Sector is set
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") . |
int |
nodeId()
Returns the node id selected
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") . |
Point3d |
point()
Returns the point selected
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") . |
double |
rotationAngle()
Returns the rotation angle selected
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") . |
int |
sectorId()
Returns the node label selected
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") . |
int |
seid()
Returns the super element id selected
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") . |
void |
setEdgeId(int edgeId)
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") . |
void |
setElemId(int elemId)
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") . |
void |
setFaceId(int faceId)
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") . |
void |
setNodeId(int nodeId)
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") . |
void |
setPoint(Point3d point)
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") . |
void |
setRotationAngle(double rotationAngle)
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") . |
void |
setSectorId(int sectorId)
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") . |
void |
setSEId(int seId)
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") . |
_value, dispose, printTestData, printTestData
int nodeId() throws NXException, RemoteException
NXException
RemoteException
void setNodeId(int nodeId) throws NXException, RemoteException
nodeId
- NXException
RemoteException
boolean hasNode() throws NXException, RemoteException
NXException
RemoteException
int elemId() throws NXException, RemoteException
NXException
RemoteException
void setElemId(int elemId) throws NXException, RemoteException
elemId
- NXException
RemoteException
boolean hasElem() throws NXException, RemoteException
NXException
RemoteException
int edgeId() throws NXException, RemoteException
NXException
RemoteException
void setEdgeId(int edgeId) throws NXException, RemoteException
edgeId
- NXException
RemoteException
boolean hasEdge() throws NXException, RemoteException
NXException
RemoteException
int faceId() throws NXException, RemoteException
NXException
RemoteException
void setFaceId(int faceId) throws NXException, RemoteException
faceId
- NXException
RemoteException
boolean hasFace() throws NXException, RemoteException
NXException
RemoteException
int seid() throws NXException, RemoteException
NXException
RemoteException
void setSEId(int seId) throws NXException, RemoteException
seId
- NXException
RemoteException
boolean hasSE() throws NXException, RemoteException
NXException
RemoteException
int sectorId() throws NXException, RemoteException
NXException
RemoteException
void setSectorId(int sectorId) throws NXException, RemoteException
sectorId
- NXException
RemoteException
boolean hasSector() throws NXException, RemoteException
NXException
RemoteException
double rotationAngle() throws NXException, RemoteException
NXException
RemoteException
void setRotationAngle(double rotationAngle) throws NXException, RemoteException
rotationAngle
- NXException
RemoteException
boolean hasRotationAngle() throws NXException, RemoteException
NXException
RemoteException
Point3d point() throws NXException, RemoteException
NXException
RemoteException
void setPoint(Point3d point) throws NXException, RemoteException
point
- NXException
RemoteException
boolean hasPoint() throws NXException, RemoteException
NXException
RemoteException
void delete() throws NXException, RemoteException
NXException
RemoteException
Copyright 2017 Siemens Product Lifecycle Management Software Inc. All Rights Reserved.