A B C D E F G H I J K L M N O P Q R S T U V W X Y Z _

J

j() - Method in interface nxopen.cam.InspectionMeasurePointBuilder

Returns the J direction at measured point
License requirements: None.

J - Static variable in class nxopen.cam.TurnToolBuilder.HolderStyles

J-Style

J - Static variable in class nxopen.drawings.DrawingSheet.StandardSheetSize

34 X 55 inches

J - Static variable in class nxopen.motion.JointFrictionAdams.FrictionYokeType

J - Static variable in class nxopen.motion.JointFrictionRecurDyn.FrictionYokeType

J1369CHILD_RESTRAINT_TETHER_STRAPS - Static variable in class nxopen.features.vehicledesign.SeatBeltAnchorageBuilder.StandardTypes

j1369

j1369Illu() - Method in interface nxopen.features.vehicledesign.SeatBeltAnchorageBuilder

Shows an illustration picture for standard j1369
License requirements: nx_general_packaging ("NX General Packaging")
.

j383Illu() - Method in interface nxopen.features.vehicledesign.SeatBeltAnchorageBuilder

Shows an illustration picture for standard j383
License requirements: nx_general_packaging ("NX General Packaging")
.

J383SEAT_BELT_ANCHORAGE - Static variable in class nxopen.features.vehicledesign.SeatBeltAnchorageBuilder.StandardTypes

j383

J3dColor() - Constructor for class nxopen.DisplayManager.J3dColor

J3dColor(double, double, double) - Constructor for class nxopen.DisplayManager.J3dColor

Constructor for the J3dColor object.

J3dData() - Constructor for class nxopen.DisplayManager.J3dData

J3dData(DisplayableObject, boolean, boolean, String, DisplayManager.J3dMaterial) - Constructor for class nxopen.DisplayManager.J3dData

Constructor for the J3dData object.

J3dEntity() - Constructor for class nxopen.uf.UFDisp.J3dEntity

J3dEntity(Tag, int, int, double[][], double, double, int, int, int, int, double[], String) - Constructor for class nxopen.uf.UFDisp.J3dEntity

j3dGeometry(int) - Method in interface nxopen.uf.UFDisp

Refer to UF_DISP_j3d_geometry for documentation.

J3dGeometryData() - Constructor for class nxopen.DisplayManager.J3dGeometryData

J3dGeometryData() - Constructor for class nxopen.uf.UFDisp.J3dGeometryData

J3dMaterial() - Constructor for class nxopen.DisplayManager.J3dMaterial

J3dMaterial(DisplayManager.J3dColor, DisplayManager.J3dColor, double, double, double, double, double) - Constructor for class nxopen.DisplayManager.J3dMaterial

Constructor for the J3dMaterial object.

J826TYPE10TH_PERCENTILE - Static variable in class nxopen.features.vehicledesign.ManikinBuilder.SAEPercentileType

10th Percentile SAE j826 Standard Type

J826TYPE50TH_PERCENTILE - Static variable in class nxopen.features.vehicledesign.ManikinBuilder.SAEPercentileType

50th Percentile SAE j826 Standard Type

J826TYPE95TH_PERCENTILE - Static variable in class nxopen.features.vehicledesign.ManikinBuilder.SAEPercentileType

95th Percentile SAE j826 Standard Type

J833LARGE_HUMAN95TH_MALE - Static variable in class nxopen.features.vehicledesign.ManikinBuilder.SAEPercentileType

Large Human SAE j833 Standard Type

J833MEDIUM_HUMAN_HALFWAY_POSITION - Static variable in class nxopen.features.vehicledesign.ManikinBuilder.SAEPercentileType

Medium Human SAE j833 Standard Type

J833SMALL_HUMAN5TH_FEMALE - Static variable in class nxopen.features.vehicledesign.ManikinBuilder.SAEPercentileType

Small Human SAE j833 Standard Type

JA_CAE_OPT_SOL_get_result() - Constructor for class nxopen.cae.optimization.TBSOptimizationSolution.JA_CAE_OPT_SOL_get_result

jacobian() - Method in interface nxopen.cae.ElementModifyOrderBuilder

Returns the jacobian value to be used for creating mixed type midnodes
License requirements: None.

jacobian() - Method in interface nxopen.cae.MappedMeshBuilder

Returns the jacobian
License requirements: None.

JACOBIAN_RATIO - Static variable in class nxopen.cae.modelcheck.TestValueTypes.TestType

JACOBIAN_SIGN - Static variable in class nxopen.cae.modelcheck.TestValueTypes.TestType

JACOBIAN_ZERO - Static variable in class nxopen.cae.modelcheck.TestValueTypes.TestType

jacobianToggle() - Method in interface nxopen.cae.ElementSplitBuilder

Returns a value indicating whether elements are to be split based on Jacobian.

jacobianValue() - Method in interface nxopen.cae.ElementSplitBuilder

Returns a threshold jacobian value.

JaDeformDefinitionExpData() - Constructor for class nxopen.features.DeformDefinitionBuilder.JaDeformDefinitionExpData

JaDeformDefinitionExpData(int, Expression, String, String, String, int) - Constructor for class nxopen.features.DeformDefinitionBuilder.JaDeformDefinitionExpData

Constructor for the JaDeformDefinitionExpData object.

jama() - Method in interface nxopen.IgesCreator

Returns the jama - if set to true the exported data will be Japanese Automotive compliant
License requirements: None.

jama() - Method in interface nxopen.NXTo2dCreator

Returns the jama - if set to true the exported data will be Japanese Automotive compliant
License requirements: None.

JAN - Static variable in class nxopen.DateItemBuilder.MonthOfYear

JAPAN_ARTICLE44TRIAS29TRIAS39 - Static variable in class nxopen.features.vehicledesign.MirrorCertificationBuilder.DriverSideStandardsType

Represents Japan : Article 44/TRIAS 29/TRIAS 39 standard

JAPAN_ARTICLE44TRIAS29TRIAS39 - Static variable in class nxopen.features.vehicledesign.MirrorCertificationBuilder.InsideStandardsType

Represents Japan : Article 44/TRIAS 29/TRIAS 39 standard

JAPAN_ARTICLE44TRIAS29TRIAS39 - Static variable in class nxopen.features.vehicledesign.MirrorCertificationBuilder.PassengerSideStandardsType

Represents Japan : Article 44/TRIAS 29/TRIAS 39 standard

JAPANESE - Static variable in class nxopen.features.vehicledesign.PedestrianProtectionBuilder.StandardType

Japanese standard

JAPANESE_ENVELOPE_CHOU3 - Static variable in class nxopen.PrintBuilder.PaperSize

Japanese Envelope Chou #3: Windows 98/Me, Windows NT 4.0 and later

JAPANESE_ENVELOPE_CHOU3ROTATED - Static variable in class nxopen.PrintBuilder.PaperSize

Japanese Envelope Chou #3 Rotated: Windows 98/Me, Windows NT 4.0 and later

JAPANESE_ENVELOPE_CHOU4 - Static variable in class nxopen.PrintBuilder.PaperSize

Japanese Envelope Chou #4: Windows 98/Me, Windows NT 4.0 and later

JAPANESE_ENVELOPE_CHOU4ROTATED - Static variable in class nxopen.PrintBuilder.PaperSize

Japanese Envelope Chou #4 Rotated: Windows 98/Me, Windows NT 4.0 and later

JAPANESE_ENVELOPE_KAKU2 - Static variable in class nxopen.PrintBuilder.PaperSize

Japanese Envelope Kaku #2: Windows 98/Me, Windows NT 4.0 and later

JAPANESE_ENVELOPE_KAKU2ROTATED - Static variable in class nxopen.PrintBuilder.PaperSize

Japanese Envelope Kaku #2 Rotated: Windows 98/Me, Windows NT 4.0 and later

JAPANESE_ENVELOPE_KAKU3 - Static variable in class nxopen.PrintBuilder.PaperSize

Japanese Envelope Kaku #3: Windows 98/Me, Windows NT 4.0 and later

JAPANESE_ENVELOPE_KAKU3ROTATED - Static variable in class nxopen.PrintBuilder.PaperSize

Japanese Envelope Kaku #3 Rotated: Windows 98/Me, Windows NT 4.0 and later

JAPANESE_ENVELOPE_YOU4 - Static variable in class nxopen.PrintBuilder.PaperSize

Japanese Envelope You #4: Windows 98/Me, Windows NT 4.0 and later

JAPANESE_ENVELOPE_YOU4ROTATED - Static variable in class nxopen.PrintBuilder.PaperSize

Japanese Envelope You #4 Rotated: Windows 98/Me, Windows NT 4.0 and later

JAPANESE_POSTCARD - Static variable in class nxopen.PrintBuilder.PaperSize

Japanese Postcard, 100- by 148-millimeters

JAPANESE_POSTCARD_ROTATED - Static variable in class nxopen.PrintBuilder.PaperSize

Japanese Postcard Rotated, 148- by 100-millimeters: Windows 98/Me, Windows NT 4.0 and later

JAVA - Static variable in class nxopen.preferences.SessionUserInterface.JournalLanguageType

JAVA - Static variable in class nxopen.report.ProgramInformation.LanguageType

Java language

JBUTT - Static variable in class nxopen.annotations.LineWeldDataBuilder.WeldSymbolType

JBUTT - Static variable in class nxopen.annotations.Symbol

Specifies J buttt weld symbol

JCG_FRONTAL_SOLVER - Static variable in class nxopen.uf.UFConstants

JCG_PCG_SOLVER - Static variable in class nxopen.uf.UFConstants

JCG_SOLVER - Static variable in class nxopen.uf.UFConstants

jctName - Variable in class nxopen.uf.UFSim.AskAxisDofJunctionData

jdirectionBuilder() - Method in interface nxopen.cam.MachineHeadGroupBuilder

Returns the j direction
License requirements: cam_base ("CAM BASE")
.

jerk - Variable in class nxopen.mechatronics.CamProfileBuilder.Element

segment jerk

jerkExpression() - Method in interface nxopen.motion.DriverOperation

Returns the jerk expression
License requirements: None.

jerkLimit() - Method in interface nxopen.sim.KinematicAxisBuilder

Returns the jerk limit.

JGROOVE - Static variable in class nxopen.weld.WeldGrooveBuilder.Types

J Groove

JGROOVE - Static variable in class nxopen.weld.WeldGrooveShape

J groove shape

jigOnPlane() - Method in interface nxopen.linedesigner.CreateSystemBuilder

Returns an API that gets jig on plane
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

JigOnPlaneBuilder - Interface in nxopen.linedesigner

Jig on plane
To create a new instance of this class, use nxopen.linedesigner.LineDesignerManager#createJigOnPlaneBuilder

Created in NX9.0.0

JigOnPlaneBuilder.JigPlaneParamsData - Class in nxopen.linedesigner

This class holds the data returned from JigOnPlaneBuilder.getJigPlaneParams()

JigPlaneParamsData() - Constructor for class nxopen.linedesigner.JigOnPlaneBuilder.JigPlaneParamsData

JIGSAW - Static variable in class nxopen.drawings.BrokenViewBuilder.BreakLineStyle

Jigsaw

JIGSAW - Static variable in class nxopen.drawings.ViewBreakBuilder.Viewbreaklinestyle

JIGSAW - Static variable in class nxopen.preferences.PartDrafting.BreakLineStyle

Jigsaw

JIS - Static variable in class nxopen.annotations.SurfaceFinishBuilder.StandardType

JIS

JIS - Static variable in class nxopen.annotations.SurfaceFinishStandard

JIS

JIS - Static variable in class nxopen.annotations.WeldStandard

JIS standard

JIS - Static variable in class nxopen.uf.UFDraw.ArwHeadType

JIS_STANDARD - Static variable in class nxopen.drawings.SectionLineStyleBuilder.StandardStyle

Deprecated.

jline() - Method in interface nxopen.cam.InspectionLineFeatureBuilder

Returns the J component of the lines direction vector
License requirements: None.

jnormal() - Method in interface nxopen.cam.InspectionLineFeatureBuilder

Returns the J component of the lines normal vector as determined by an underlying surface
License requirements: None.

JOB_INFORMATION - Static variable in class nxopen.tooling.QuickQuotationBuilder.Types

job information type

jobAborted - Variable in class nxopen.uf.UFClear.Summary

jobName() - Method in interface nxopen.PlotBuilder

Returns the job name to be used for plotting.

JobOptions() - Constructor for class nxopen.uf.UFPlot.JobOptions

JobOptions(UFPlot.Colors, boolean, UFPlot.Widths, boolean, double) - Constructor for class nxopen.uf.UFPlot.JobOptions

jobsDir - Variable in class nxopen.uf.UFPlot.PrinterGroup

jobStatus - Variable in class nxopen.assemblies.ClearanceSet.Summary

Indicates if the analysis was aborted.

JOG - Static variable in class nxopen.annotations.LineComponent.LineType

jog line

Jog - Interface in nxopen.features

Represents a Jog feature
To create or edit an instance of this class, use JogBuilder

Created in NX5.0.0

JOG - Static variable in class nxopen.features.StepBuilder.StepNewTypes

Adds a step to thin a belt face and wall face.

JOG_IN - Static variable in class nxopen.annotations.JogOrientation

Jog orientation in

JOG_OUT - Static variable in class nxopen.annotations.JogOrientation

Jog orientation out

JogBuilder - Interface in nxopen.features.sheetmetal

Represents a Jog feature builder.

JogBuilder.BendLocationOptions - Class in nxopen.features.sheetmetal

Represents the bend location type.

JogBuilder.DimensionTypeOptions - Class in nxopen.features.sheetmetal

the Dimension options for jog.

JogBuilder.DirectionTypeOptions - Class in nxopen.features.sheetmetal

this enum represents the direction for the Jog.

JogBuilder.FixedSideOptions - Class in nxopen.features.sheetmetal

The "left" option represents the side to the left of a person who is walking along the section in the direction of its curves when the section normal is pointing up.

joggle() - Method in interface nxopen.features.EmbossSidewall

Returns the sidewall joggle
License requirements: None.

JOGGLE - Static variable in class nxopen.features.PatchOpeningsBuilder.Types

Joggle fill method

Joggle - Interface in nxopen.features.sheetmetal

Represents a joggle feature
To create or edit an instance of this class, use JoggleBuilder

Created in NX11.0.0

JOGGLE_LINE - Static variable in class nxopen.preferences.PartFlexiblePrintedCircuitDesign.FlatPatternObjectType

JOGGLE_LINE - Static variable in class nxopen.preferences.PartSheetmetal.FlatPatternObjectType

JOGGLE_LINE - Static variable in class nxopen.sheetmetal.FlatPatternSettings.FlatPatternObjectType

JoggleBuilder - Interface in nxopen.features.sheetmetal

Represents a Sheetmetal joggle builder class.

JoggleBuilder.LimitTypes - Class in nxopen.features.sheetmetal

This enum defines the limit types

joggleCompensation() - Method in interface nxopen.features.sheetmetal.AeroJoggleBuilder

Returns the joggle compensation.

joggleIn() - Method in interface nxopen.features.sheetmetal.AeroJoggleBuilder

Returns the joggle in flag.

JoggleInputListItemBuilder - Interface in nxopen.features.sheetmetal

Represents a Sheetmetal joggle input list item builder class.

JoggleInputListItemBuilderList - Interface in nxopen.features.sheetmetal

Represents a list of objects.

JoggleSideOptionsBuilder - Interface in nxopen.features.sheetmetal

Represents a Sheetmetal Joggle side Options class.

JogOrientation - Class in nxopen.annotations

Specifies the options jog orientation

jogs() - Method in interface nxopen.annotations.LeaderData

Returns the jogs
License requirements: None.

jogWall() - Method in interface nxopen.die.MachineReliefBuilder

Returns the indicator defining if the wall should be jogged (or changed) to accommodate the cam definition.

JOHAB - Static variable in class nxopen.features.TextBuilder.ScriptOptions

Specifies the Johab Korean character set

JOIN_SHEETS - Static variable in class nxopen.STLCreator.SheetBodyExportOptionEnum

attempt to join sheet bodies

JoinCurves - Interface in nxopen.features

Represents a join curve feature
To create or edit an instance of this class, use JoinCurvesBuilder

Created in NX5.0.0

joinCurves() - Method in interface nxopen.SketchIntersectionCurveBuilder

Returns the join curves option
License requirements: None.

joinCurvesAndEdges(ICurve[], double) - Method in interface nxopen.tooling.DieEngTrimAngleCheckBuilder

Join the input curves and edges.

JoinCurvesBuilder - Interface in nxopen.features

Represents a JoinCurves builder.

JoinCurvesBuilder.OutputCurve - Class in nxopen.features

Represents the output curve type.

joinedCurve - Variable in class nxopen.uf.UFCurve.CreateJoinedCurveData

joinedCurveFeature - Variable in class nxopen.uf.UFCurve.CreateJoinedFeatureData

joinIsocline() - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder

Returns the joining isocline
License requirements: None.

joinNegative(WeldFillStripBuilder) - Method in interface nxopen.weld.WeldFillStripBuilder

Joins the end of the fill strip, opposite of the length direction from center, to the other fill strip input.

joinOption() - Method in interface nxopen.features.CompositeCurveBuilder

Returns the join option
License requirements: None.

joinOutputCurves() - Method in interface nxopen.die.CompensateRoughDataBuilder

Returns the join output curves setting, true indicates that the output curves will be joined into a single curve.

joinPositive(WeldFillStripBuilder) - Method in interface nxopen.weld.WeldFillStripBuilder

Joins the end of the fill strip, along the length direction from center, to the other fill strip input.

JOINT - Static variable in class nxopen.cae.DurSpecialistLocalDefinitionByGroupBuilder.LocalDefinitionType

generate one local definition with a union group

joint() - Method in interface nxopen.mechatronics.BreakingConstraintBuilder

Returns the joint object.

joint() - Method in interface nxopen.motion.ConnectorBuilder

Returns the joint .

Joint - Interface in nxopen.motion

Represents a motion joint object
To create or edit an instance of this class, use JointBuilder

Created in NX5.0.0

joint() - Method in interface nxopen.motion.JointDriverBuilder

Returns the joint
License requirements: None.

joint() - Method in interface nxopen.motion.ScalarTorqueBuilder

Returns the joint
License requirements: None.

JOINT - Static variable in class nxopen.motion.ScalarTorqueBuilder.ScalarTorqueType

Scalar Torque Type Joint.

Joint() - Constructor for class nxopen.uf.UFMotion.Joint

Joint(String, UFMotion.JointType, boolean, Tag, Tag, Tag, Tag, Tag, Tag, double) - Constructor for class nxopen.uf.UFMotion.Joint

joint - Variable in class nxopen.uf.UFMotion.SpringDamper

joint() - Method in interface nxopen.weld.EdgePrepValuesBuilder

Returns the welding joint curves.

joint() - Method in interface nxopen.weld.WeldJointBuilder

Returns the welding joint curves.

JOINT - Static variable in class nxopen.weld.WeldObjectBuilder.CommandName

Welding Joint command

joint1 - Variable in class nxopen.uf.UFMotion.JointCoupler

joint2 - Variable in class nxopen.uf.UFMotion.JointCoupler

JOINT_DEFINITION - Static variable in class nxopen.weld.WeldObjectBuilder.CommandName

Edit Joint Definition Parameters

JOINT_FEATURE - Static variable in class nxopen.weld.CharacteristicsBuilder.Type

JOINT_OR_CONSTRAINT - Static variable in class nxopen.motion.ControlOutputBuilder.ControlOutputType

Control Output Type Joint or Constraint.

jointAngleReport() - Method in interface nxopen.features.vehicledesign.ManikinBuilder

Returns the joint angle report
License requirements: None.

JointBuilder - Interface in nxopen.motion

This builder class is used to create or edit Joint objects.

JointCollection - Interface in nxopen.motion

Represents a collection of motion joints
To obtain an instance of this class, refer to MotionManager

Created in NX5.0.0

JointCoupler() - Constructor for class nxopen.uf.UFMotion.JointCoupler

JointCoupler(String, UFMotion.JointCouplerType, Tag, Tag, double, Tag, Tag) - Constructor for class nxopen.uf.UFMotion.JointCoupler

jointDefine() - Method in interface nxopen.motion.JointBuilder

Returns the joint define
License requirements: mechanisms ("MECHANISMS")
.

JointDefine - Interface in nxopen.motion

Represents a joint define object .

JointDefine.OrientationType - Class in nxopen.motion

Defines the orientation type of joint

JointDefine.ScrewJointDisplCurveType - Class in nxopen.motion

Defines the displacement curve type for screw joints

JointDefine.ScrewJointMethodType - Class in nxopen.motion

Defines the method type of screw joints

JointDefine.ScrewJointRatioType - Class in nxopen.motion

Defines the ratio type for screw joints

JointDefine.Type - Class in nxopen.motion

Joint define type

JointDefine.UniversalJointAxisType - Class in nxopen.motion

Defines the axis type for universal joints

jointDialogButton() - Method in interface nxopen.HumanHandsDialogBuilder

TODO: fill in a description for this
License requirements: ug_human ("Human Modelling")
.

JointDriver - Interface in nxopen.motion

Represents a joint driver
To create or edit an instance of this class, use JointDriverBuilder

Created in NX5.0.0

JointDriverBuilder - Interface in nxopen.motion

Represents a JointDriverBuilder
To create a new instance of this class, use JointDriverCollection.createJointDriverBuilder(nxopen.motion.JointDriver)

Created in NX5.0.0

JointDriverCollection - Interface in nxopen.motion

Represents a collection of Driver objects
To obtain an instance of this class, refer to MotionManager

Created in NX5.0.0

jointDrivers() - Method in interface nxopen.motion.MotionManager

Returns the JointDriverCollection belonging to this part
Created in NX3.0.0

jointExitBuilder() - Method in interface nxopen.weld.EdgePrepValuesBuilder

Returns the JointExitBuilder .

JointExitBuilder - Interface in nxopen.weld

Used to set custom edge preparation parameters of a WeldJoint feaure.

JointExitBuilder.BodySide - Class in nxopen.weld

Settings to indicate the side the positions should be applied to.

JointExitBuilder.EdgePrepValuesData - Class in nxopen.weld

This class holds the data returned from JointExitBuilder.getEdgePrepValues(nxopen.weld.JointExitBuilder.Positions)

JointExitBuilder.FilletSizes - Class in nxopen.weld

The structure for defining fillet weld lengths.

JointExitBuilder.Positions - Class in nxopen.weld

Settings to indicate the desired position of edge preporation thickness and angle.

jointFace() - Method in interface nxopen.tooling.ElectrodeBlankBuilder

Returns the face to create a joint object between the blank and head bodies.

jointFriction() - Method in interface nxopen.motion.JointBuilder

Returns the joint friction
License requirements: mechanisms ("MECHANISMS")
.

JointFriction - Interface in nxopen.motion

Represents a joint friction object .

JointFrictionAdams - Interface in nxopen.motion

Represents a adams joint friction object .

JointFrictionAdams.FrictionEffect - Class in nxopen.motion

Joint friction effect

JointFrictionAdams.FrictionOverlapDelta - Class in nxopen.motion

Joint friction overlap_delta

JointFrictionAdams.FrictionYokeType - Class in nxopen.motion

Joint friction yoke type

JointFrictionLms - Interface in nxopen.motion

Represents a lms joint friction object .

JointFrictionRecurDyn - Interface in nxopen.motion

Represents a recurdyn joint friction object .

JointFrictionRecurDyn.FrictionEffect - Class in nxopen.motion

Joint friction effect

JointFrictionRecurDyn.FrictionOverlapDelta - Class in nxopen.motion

Joint friction overlap_delta

JointFrictionRecurDyn.FrictionYokeType - Class in nxopen.motion

Joint friction yoke type

JointItemBuilder - Interface in nxopen.weld

Used to create or edit a WeldJoint feature.

JointItemBuilderList - Interface in nxopen.weld

Represents a list of objects.

JointLimits() - Constructor for class nxopen.uf.UFMotion.JointLimits

JointLimits(double, double) - Constructor for class nxopen.uf.UFMotion.JointLimits

jointList() - Method in interface nxopen.weld.WeldJointBuilder

Returns the list of JointItemBuilder objects.

Jointmark - Interface in nxopen.weld

Represents a Weld Jointmark Feature.

JOINTMARK - Static variable in class nxopen.weld.WeldObjectBuilder.CommandName

Joint Mark command

JOINTMARK - Static variable in class nxopen.weld.WeldPointExitBuilder.CommandName

Joint Mark command

JOINTMARK_FEATURE - Static variable in class nxopen.weld.CharacteristicsBuilder.Type

JointmarkBuilder - Interface in nxopen.weld

Represents a Jointmark builder
To create a new instance of this class, use WeldManager.createJointmarkBuilder(nxopen.weld.Jointmark)
Default values.

JointmarkBuilder.ConnectedPanelTypes - Class in nxopen.weld

The type of sheets to create

JointmarkBuilder.FromReuseFeaturesData - Class in nxopen.weld

This class holds the data returned from JointmarkBuilder.fromReuseFeatures()

JointmarkBuilder.Method - Class in nxopen.weld

The type of construction method for creating Jointmark

JointmarkBuilder.OrientationMethodTypes - Class in nxopen.weld

The type of orientation method for defining the default coordinate system.

JointmarkBuilder.ProjectionDirectionOptions - Class in nxopen.weld

The projection direction used to project points onto the reference sheet

JointmarkBuilder.ReferenceSheetTypes - Class in nxopen.weld

The type of sheets to create

JointmarkBuilder.ReuseMethod - Class in nxopen.weld

The method to indicate if all reuse features have the same connected parts

JointmarkElement - Interface in nxopen.weld

Represents a Weld.JointmarkElement Feature.

JointmarkFaceSetsBuilder - Interface in nxopen.weld

Used to create or edit a set of faces for Jointmark
To create a new instance of this class, use JointmarkBuilder.newFaceSets()

Created in NX9.0.0

JointmarkFaceSetsBuilderList - Interface in nxopen.weld

Represents a list of objects.

JointmarkGuideBuilder - Interface in nxopen.weld

Used to create or edit a guide curve for Jointmark.

JointmarkGuideBuilder.GuideCurvesData - Class in nxopen.weld

This class holds the data returned from JointmarkGuideBuilder.getGuideCurves()

JointmarkGuideBuilder.Location - Class in nxopen.weld

The type of guide curve

JointmarkGuideBuilder.SpaceMethod - Class in nxopen.weld

Options for Spacing Method

JointmarkGuideBuilder.SpaceOption - Class in nxopen.weld

Spacing Option

JointmarkGuideBuilderList - Interface in nxopen.weld

Represents a list of objects.

JointmarkPointsBuilder - Interface in nxopen.weld

Used to create or edit a point in the list of points for Jointmark
To create a new instance of this class, use JointmarkBuilder.newPoints()

Created in NX9.0.0

JointmarkPointsBuilder.PointPosition - Class in nxopen.weld

The point classification

JointmarkPointsBuilderList - Interface in nxopen.weld

Represents a list of objects.

jointMethod() - Method in interface nxopen.tooling.ElectrodeBlankBuilder

Returns the joint object type.

jointMidPoint - Variable in class nxopen.weld.WeldJointBuilder.JointMidPointData

The mid point of the joint in absolute coordinates.

JointMidPointData() - Constructor for class nxopen.weld.WeldJointBuilder.JointMidPointData

JointMidPointData(Point3d, Vector3d, Vector3d, Vector3d, Vector3d, boolean) - Constructor for class nxopen.weld.WeldJointBuilder.JointMidPointData

Constructor for the JointMidPointData object.

jointmidpointdata - Variable in class nxopen.weld.WeldJointBuilder.MidPointInformationData

The joint mid point, tangent and face normals.

JointMotionInput() - Constructor for class nxopen.uf.UFMotion.JointMotionInput

JointMotionInput(UFMotion.JointMotionInputType, Tag, double, double, double, double, double, double, double) - Constructor for class nxopen.uf.UFMotion.JointMotionInput

jointMultiDrivers() - Method in interface nxopen.motion.JointBuilder

Returns the driver multi operations : DriverMultiOperations Block
License requirements: mechanisms ("MECHANISMS")
.

jointPrefix() - Method in interface nxopen.weld.WeldJointBuilder

Returns the prefix for the weld ID attribute, and the prefix for the name of the component if WeldJointBuilder.DestinationTypes is WeldJointBuilder.DestinationTypes.NEW_COMPONENT
License requirements: None.

joints() - Method in interface nxopen.motion.MotionManager

Returns the JointCollection belonging to this part
Created in NX3.0.0

jointSelection() - Method in interface nxopen.motion.ControlOutputBuilder

Returns the joint selection.

jointsLimits() - Method in interface nxopen.motion.ArticulationControl

Returns the articulation joint limits setting
License requirements: mechanisms ("MECHANISMS")
.

jointsLimits() - Method in interface nxopen.motion.SpreadsheetRunControl

Returns the spreadsheet run joint limits setting
License requirements: mechanisms ("MECHANISMS")
.

jointTangent - Variable in class nxopen.weld.WeldJointBuilder.JointMidPointData

The tangent at the joint mid point in absolute coordinates.

jointType() - Method in interface nxopen.motion.JointDefine

Returns the joint type
License requirements: mechanisms ("MECHANISMS")
.

joinType - Variable in class nxopen.uf.UFCurve.Proj1

joinType - Variable in class nxopen.uf.UFCurve.SectionGeneralData

jounceDistance() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder

Returns the jounce distance that is used for the Five Link Solid Axle without steering suspension template.

journalFileFormat() - Method in interface nxopen.preferences.SessionUserInterface

Returns the journal file format
License requirements: None.

journalIdentifier() - Method in interface nxopen.cae.xyplot.BaseDisplayStyleSetting

Returns the identifier that would be recorded in a journal for this object.

journalIdentifier() - Method in interface nxopen.INXObject

Returns the identifier that would be recorded in a journal for this object.

journaling() - Method in interface nxopen.pdm.SessionSettings

Returns a flag controlling Teamcenter journaling
License requirements: None.

journalLanguage() - Method in interface nxopen.JournalManager

Returns the language the journal will be recored in.

journalLanguage() - Method in interface nxopen.preferences.SessionUserInterface

Returns the journal language.

JournalManager - Interface in nxopen

Represents the JournalManager which is used to query data about journals when recording and replaying journal files.

journalManager() - Method in interface nxopen.Session

Returns the JournalManager instance belonging to this session .

journalName - Variable in class nxopen.uf.UFPs.AskJournalData

journalPause() - Method in interface nxopen.UI

Pauses execution of a journal.

journalState - Variable in class nxopen.uf.UFPs.AskJournalData

JPE_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId

JPEG - Static variable in class nxopen.display.IRayPlusStudioEditorBuilder.IRayPlusStudioRemoteRenderFormatType

JPEG - Static variable in class nxopen.pdm.FileManagement.FileType

JPEG - Static variable in class nxopen.uf.UFDisp.ImageFormat

JPEG_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId

JPEG_FORMAT - Static variable in class nxopen.uf.UFPlot.Format

JPG - Static variable in class nxopen.annotations.DraftingImage.FileType

JPG file type

JPG - Static variable in class nxopen.display.IRayPlusStudioEditorBuilder.IRayPlusStudioStaticImageFileFormatType

Joint Photographic Experts Group (JPEG) file format

JPG - Static variable in class nxopen.display.RayTracedStudioEditorBuilder.RayTracedStudioStaticImageFileFormatType

Joint Photographic Experts Group (JPEG) file format

JPG - Static variable in class nxopen.display.SaveImageFileBrowserBuilder.FileFormats

Joint Photographic Experts Group (JPEG) file format

JPG - Static variable in class nxopen.gateway.ImageCaptureBuilder.ImageFormat

the jpg image format

JPG_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId

JPG_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId

JT - Static variable in class nxopen.cae.Post.Export

JT - Static variable in class nxopen.DxfdwgImporter.FacetImportAs

JT facets

JT - Static variable in class nxopen.facet.FacetedBodyCollection.Type

JT facet

JT - Static variable in class nxopen.facet.STLImportBuilder.FacetBodyTypes

Import to JT format

JT_CONFIG_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId

JtCreator - Interface in nxopen

Represents a JtCreator to be used when exporting the JT Data This class is created using PvtransManager .

JtCreator.AdvancedMaterials - Class in nxopen

Texture quality

JtCreator.ChordalValue - Class in nxopen

Chordal Option

JtCreator.FileStructure - Class in nxopen

JT File Structue

JtCreator.FileWrite - Class in nxopen

JT File Write

JtCreator.PmiOption - Class in nxopen

Include PMI options

JtCreator.RefsetOption - Class in nxopen

refset Options

JtCreator.TessellationOption - Class in nxopen

Tessellation Option

jtcType - Variable in class nxopen.uf.UFMotion.JointCoupler

jtdatasetname() - Method in interface nxopen.cae.PostJtExportBuilder

Returns the jtdatasetname of the builder
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.

JTFACET_BODY - Static variable in class nxopen.facet.ConvertFacetBodyBuilder.OutputTypes

Convert To JT Facet bodies

JTFACET_BODY - Static variable in class nxopen.facet.FacetBodyFromBodyBuilder.OutputTypes

Convert To JT Facet bodies

jtFileExists - Variable in class nxopen.uf.UFPart.AskJtInfoOfPartData

jtfilename() - Method in interface nxopen.cae.PostJtExportBuilder

Returns the jtfilename of the builder
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.

jtfileStructure() - Method in interface nxopen.JtCreator

Returns the jtFileStructure * - Determines the organization of the JT files on the disk
License requirements: None.

jtgeometryTolerance() - Method in interface nxopen.drawings.ConversionProcessSettingsBuilder

Returns the geometry tolerance
License requirements: None.

jtpartNameAttribute() - Method in interface nxopen.drawings.ConversionProcessSettingsBuilder

Returns the JT part name
License requirements: None.

jtParts() - Method in interface nxopen.JtCreator

Returns the m_jtParts * - WriteWhichFiles = JTPARTS
License requirements: None.

jtType - Variable in class nxopen.uf.UFMotion.Joint

jtUpdateFromSource() - Method in interface nxopen.preferences.SessionPdm

Returns the kind of JT update performed when a part is loaded
License requirements: None.

jtWrite() - Method in interface nxopen.JtCreator

Returns the jtWrite * - Allows to choose between writing Assembly and PArt data to the JT file
License requirements: None.

JUL - Static variable in class nxopen.DateItemBuilder.MonthOfYear

JumperConnection - Interface in nxopen.routing.electrical

A jumper connection connects ports on the same connector.

JumperConnectionCollection - Interface in nxopen.routing.electrical

A collection of JumperConnection objects.

jumperConnections() - Method in interface nxopen.routing.RouteManager

JumperConnection collection .

jumperGap() - Method in interface nxopen.pid.PreferencesConnectionBuilder

Returns the jumper gap.

jumperPriority() - Method in interface nxopen.pid.PreferencesConnectionBuilder

Returns the jumper priority type.

jumperPriorityUseLineType() - Method in interface nxopen.pid.PreferencesConnectionBuilder

Returns the jumper priority use line type.

jumperType() - Method in interface nxopen.diagramming.SheetBuilder

Returns the jumper type of the sheet.

jumperType() - Method in interface nxopen.pid.PreferencesConnectionBuilder

Returns the jumper type.

jumpLabel() - Method in interface nxopen.cam.InspectionCmmCommandBuilder

Returns the program jump label
License requirements: None.

JUMPTO_LABEL - Static variable in class nxopen.cam.InspectionCmmCommandBuilder.CommandTypes

Enter a jump to label statement

jumpToDetailsLine(int) - Method in interface nxopen.sim.IsvControlPanelBuilder

Jump to details line
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.

jumpToMachineTime(String) - Method in interface nxopen.sim.IsvControlPanelBuilder

Jump to machine time
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.

jumpToNcProgramLine(int) - Method in interface nxopen.sim.IsvControlPanelBuilder

Jump to nc program line in the active channel
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.

jumpToNcProgramLine(String, int) - Method in interface nxopen.sim.IsvControlPanelBuilder

Jump to nc program line in the specified channel
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.

jumpToNextSection() - Method in interface nxopen.tooldesigner.ReusePieChartBuilder

Jump to next section
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.

jumpToPrevSection() - Method in interface nxopen.tooldesigner.ReusePieChartBuilder

Jump to previous section
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.

jumpVelocity() - Method in interface nxopen.sim.KinematicAxisBuilder

Returns the jump velocity.

JUN - Static variable in class nxopen.DateItemBuilder.MonthOfYear

junction() - Method in interface nxopen.cae.BoltBuilder

Returns the option to include junction edges for creating spider elements
License requirements: None.

junction() - Method in interface nxopen.sim.KinematicAxisBuilder

Returns the junction
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.

junction1Edge() - Method in interface nxopen.cae.BoltBuilder

Returns the selected junction 1 edge(s)
License requirements: None.

junction1Point() - Method in interface nxopen.cae.BoltBuilder

Returns the junction 1 point(s)
License requirements: None.

junction1SelectionType() - Method in interface nxopen.cae.BoltBuilder

Returns the junction 1 selection type
License requirements: None.

junction1SpiderDiameter() - Method in interface nxopen.cae.BoltBuilder

Returns the diameter used for creating junction 1 spider elements
License requirements: None.

junction1SpiderScale() - Method in interface nxopen.cae.BoltBuilder

Returns the scale used to determine the junction 1 spider diameter relative to the hole diameter
License requirements: None.

junction1SpiderType() - Method in interface nxopen.cae.BoltBuilder

Returns the option for junction 1 spider diameter
License requirements: None.

junction1Surface() - Method in interface nxopen.cae.BoltBuilder

Returns the selected junction 1 surface(s)
License requirements: None.

junction2Edge() - Method in interface nxopen.cae.BoltBuilder

Returns the selected junction 2 edge(s)
License requirements: None.

junction2Point() - Method in interface nxopen.cae.BoltBuilder

Returns the junction 2 point(s)
License requirements: None.

junction2SelectionType() - Method in interface nxopen.cae.BoltBuilder

Returns the junction 2 selection type
License requirements: None.

junction2SpiderDiameter() - Method in interface nxopen.cae.BoltBuilder

Returns the diameter used for creating junction 2 spider elements
License requirements: None.

junction2SpiderScale() - Method in interface nxopen.cae.BoltBuilder

Returns the scale used to determine the junction 2 spider diameter relative to the hole diameter
License requirements: None.

junction2SpiderType() - Method in interface nxopen.cae.BoltBuilder

Returns the option for junction 2 spider diameter
License requirements: None.

junction2Surface() - Method in interface nxopen.cae.BoltBuilder

Returns the selected junction 2 surface(s)
License requirements: None.

JUNCTION_EDGES - Static variable in class nxopen.cae.Result.Quantity

junctionEdge() - Method in interface nxopen.cae.BoltBuilder

Returns the selected junction edge(s)
License requirements: None.

junctionList() - Method in interface nxopen.sim.KinematicComponentBuilder

Returns the junction list
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder") OR resource_manager_nx ("Teamcenter Resource Manager")
.

junctionName() - Method in interface nxopen.mechatronics.AlignBodyBuilder

Returns the junction name converted from MTB.

junctionPoint() - Method in interface nxopen.cae.BoltBuilder

Returns the junction point(s)
License requirements: None.

junctionRepresentationStyle() - Method in interface nxopen.ame.GeneralConnectionSettingsBuilder

Returns the representation style for TeeJunction
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.

junctionSelectionType() - Method in interface nxopen.cae.BoltBuilder

Returns the junction selection type
License requirements: None.

junctionSpiderDiameter() - Method in interface nxopen.cae.BoltBuilder

Returns the diameter used for creating junction spider elements
License requirements: None.

junctionSpiderScale() - Method in interface nxopen.cae.BoltBuilder

Returns the scale used to determine the junction spider diameter relative to the hole diameter
License requirements: None.

junctionSpiderType() - Method in interface nxopen.cae.BoltBuilder

Returns the option for junction spider diameter
License requirements: None.

junctionSurface() - Method in interface nxopen.cae.BoltBuilder

Returns the selected junction surface(s)
License requirements: None.

junctionTolerance() - Method in interface nxopen.cae.BoltBuilder

Returns the option to tune junction tolerance for a model.

JUST_BOTTOM - Static variable in class nxopen.uf.UFTabnot.Just

JUST_CENTER - Static variable in class nxopen.uf.UFTabnot.Just

JUST_LEFT - Static variable in class nxopen.uf.UFTabnot.Just

JUST_MIDDLE - Static variable in class nxopen.uf.UFTabnot.Just

JUST_RIGHT - Static variable in class nxopen.uf.UFTabnot.Just

JUST_TOP - Static variable in class nxopen.uf.UFTabnot.Just

justification() - Method in interface nxopen.PlotBuilder

Returns the justification of the banner text.

justification - Variable in class nxopen.uf.UFPlist.FieldFormat

JUSTIFY - Static variable in class nxopen.diagramming.DiagrammingAlignment

Setting the justify alignment

justify - Variable in class nxopen.uf.UFSfLegend.IndexTextAttr

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z _