public interface SteelVentHolesBuilder extends FeatureBuilder
SteelVentHoles
builder
ShipCollection.createSteelVentHolesBuilder(nxopen.features.shipdesign.SteelVentHoles)
Property | Value |
---|---|
AngularDim.Value | 0 |
GuideOffset.Value | 0 (millimeters part), 0 (inches part) |
NumVents | 2 |
SketchBlock.Exp1.Value | 0 |
SketchBlock.Exp10.Value | 0 |
SketchBlock.Exp11.Value | 0 |
SketchBlock.Exp12.Value | 0 |
SketchBlock.Exp2.Value | 0 |
SketchBlock.Exp3.Value | 0 |
SketchBlock.Exp4.Value | 0 |
SketchBlock.Exp5.Value | 0 |
SketchBlock.Exp6.Value | 0 |
SketchBlock.Exp7.Value | 0 |
SketchBlock.Exp8.Value | 0 |
SketchBlock.Exp9.Value | 0 |
SketchBlock.Sketches | EndCut1 |
ToggleEqualSpacing | 1 |
ToggleSymmetricOffset | 1 |
VentSpacing.Value | 0 (millimeters part), 0 (inches part) |
Modifier and Type | Method and Description |
---|---|
Expression |
angularDim()
Returns the angular dimension used to rotate the profile of the vent holes
License requirements: None. |
Expression |
guideOffset()
Returns the guide offset - the dimension used to offset the array of holes from the section guide.
|
boolean |
keepReverseGuideOffset()
Returns the keep reverse guide offset
A toggle used to remember the reverse guide value on apply.
|
boolean |
keepSectionGuide()
Returns the keep section guide
A toggle used to remember the selected object(s) on apply.
|
boolean |
keepSelectEndTrim()
Returns the keep select end trim
A toggle used to remember the selected object on apply.
|
boolean |
keepSelectStartTrim()
Returns the keep select start trim
A toggle used to remember the selected object on apply.
|
boolean |
keepSelectTargetFace()
Returns the keep select target face
A toggle used to remember the selected object(s) on apply.
|
int |
numVents()
Returns the number of vent holes.
|
OnPathDimensionBuilder |
onPathEndOffset()
Returns the offset from the start of the section to begin placing the holes.
|
OnPathDimensionBuilder |
onPathStartOffset()
Returns the offset from the start of the section to begin placing the holes.
|
boolean |
reverseGuideOffset()
Returns the reverse direction of the guide offset.
|
Section |
sectionGuide()
Returns the section guide - vent holes are placed along this guide
License requirements: None. |
SelectTaggedObject |
selectEndTrim()
Returns the select end trim - used to trim the end of the section guide.
|
SelectTaggedObject |
selectStartTrim()
Returns the select start trim - used to trim the start of the section guide.
|
SelectTaggedObjectList |
selectTargetFace()
Returns the select target face.
|
void |
setKeepReverseGuideOffset(boolean keepReverseGuideOffset)
License requirements: nx_ship_concept ("Ship Concept") . |
void |
setKeepSectionGuide(boolean keepSectionGuide)
License requirements: nx_ship_concept ("Ship Concept") . |
void |
setKeepSelectEndTrim(boolean keepSelectEndTrim)
License requirements: nx_ship_concept ("Ship Concept") . |
void |
setKeepSelectStartTrim(boolean keepSelectStartTrim)
License requirements: nx_ship_concept ("Ship Concept") . |
void |
setKeepSelectTargetFace(boolean keepSelectTargetFace)
License requirements: nx_ship_concept ("Ship Concept") . |
void |
setNumVents(int numVents)
License requirements: nx_ship_concept ("Ship Concept") . |
void |
setReverseGuideOffset(boolean reverseGuideOffset)
License requirements: nx_ship_concept ("Ship Concept") . |
void |
setToggleEqualSpacing(boolean toggleEqualSpacing)
License requirements: nx_ship_concept ("Ship Concept") . |
void |
setToggleSymmetricOffset(boolean toggleSymmetricOffset)
License requirements: nx_ship_concept ("Ship Concept") . |
SketchExpressionModifierBuilder |
sketchBlock()
Returns the library sketch block that defines the cut outline
License requirements: None. |
boolean |
toggleEqualSpacing()
Returns the toggle equal spacing.
|
boolean |
toggleSymmetricOffset()
Returns the toggle for calculating automatic symmetric offsets.
|
Expression |
ventSpacing()
Returns the spacing applied between each vent hole.
|
commitFeature, getFeature, hideInternalParentFeatureAfterEdit, parentFeatureInternal, patchSolutionFlag, patchSurfaceFilename, setParentFeatureInternal, setParentFeatureInternal, setPatchSolutionFlag, setPatchSurfaceFilename, setSurroundingPatchSurfaceFilename, showInternalParentFeatureForEdit, surroundingPatchSurfaceFilename, unsetParentFeatureInternal
commit, destroy, getCommittedObjects, getObject, showResults
printTestData, printTestData, tag, tagValue
validate
SelectTaggedObjectList selectTargetFace() throws NXException, RemoteException
NXException
RemoteException
boolean keepSelectTargetFace() throws NXException, RemoteException
NXException
RemoteException
void setKeepSelectTargetFace(boolean keepSelectTargetFace) throws NXException, RemoteException
keepSelectTargetFace
- NXException
RemoteException
Section sectionGuide() throws NXException, RemoteException
NXException
RemoteException
boolean keepSectionGuide() throws NXException, RemoteException
NXException
RemoteException
void setKeepSectionGuide(boolean keepSectionGuide) throws NXException, RemoteException
keepSectionGuide
- NXException
RemoteException
SelectTaggedObject selectStartTrim() throws NXException, RemoteException
NXException
RemoteException
boolean keepSelectStartTrim() throws NXException, RemoteException
NXException
RemoteException
void setKeepSelectStartTrim(boolean keepSelectStartTrim) throws NXException, RemoteException
keepSelectStartTrim
- NXException
RemoteException
SelectTaggedObject selectEndTrim() throws NXException, RemoteException
NXException
RemoteException
boolean keepSelectEndTrim() throws NXException, RemoteException
NXException
RemoteException
void setKeepSelectEndTrim(boolean keepSelectEndTrim) throws NXException, RemoteException
keepSelectEndTrim
- NXException
RemoteException
Expression angularDim() throws NXException, RemoteException
NXException
RemoteException
Expression guideOffset() throws NXException, RemoteException
NXException
RemoteException
boolean reverseGuideOffset() throws NXException, RemoteException
NXException
RemoteException
void setReverseGuideOffset(boolean reverseGuideOffset) throws NXException, RemoteException
reverseGuideOffset
- NXException
RemoteException
boolean keepReverseGuideOffset() throws NXException, RemoteException
NXException
RemoteException
void setKeepReverseGuideOffset(boolean keepReverseGuideOffset) throws NXException, RemoteException
keepReverseGuideOffset
- NXException
RemoteException
boolean toggleSymmetricOffset() throws NXException, RemoteException
NXException
RemoteException
void setToggleSymmetricOffset(boolean toggleSymmetricOffset) throws NXException, RemoteException
toggleSymmetricOffset
- NXException
RemoteException
OnPathDimensionBuilder onPathStartOffset() throws NXException, RemoteException
NXException
RemoteException
OnPathDimensionBuilder onPathEndOffset() throws NXException, RemoteException
NXException
RemoteException
boolean toggleEqualSpacing() throws NXException, RemoteException
NXException
RemoteException
void setToggleEqualSpacing(boolean toggleEqualSpacing) throws NXException, RemoteException
toggleEqualSpacing
- NXException
RemoteException
int numVents() throws NXException, RemoteException
NXException
RemoteException
void setNumVents(int numVents) throws NXException, RemoteException
numVents
- NXException
RemoteException
Expression ventSpacing() throws NXException, RemoteException
NXException
RemoteException
SketchExpressionModifierBuilder sketchBlock() throws NXException, RemoteException
NXException
RemoteException
Copyright 2017 Siemens Product Lifecycle Management Software Inc. All Rights Reserved.