- V - Static variable in class nxopen.cam.InspectionMethodBuilder.PointSequenceDirectionTypes
-
Order by V
- V - Static variable in class nxopen.cam.TurnToolBuilder.HolderStyles
-
V-Style
- V - Static variable in class nxopen.features.StudioXformBuilder.PlanarizeDirectionType
-
Deprecated.
V direction when planarize
- V - Static variable in class nxopen.features.StudioXformBuilderEx.PlanarizeDirectionType
-
V direction when planarize
- V - Static variable in class nxopen.features.StudioXformBuilderEx.SurfaceDirectionType
-
V direction of a B-Surface
- V - Static variable in class nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder.CurvatureTypes
-
V
- V - Static variable in class nxopen.geometricutilities.BlendSetbackBuilder.Directions
-
setback curve is an iso-v parameter curve
- V - Static variable in class nxopen.geometricutilities.RefitControlBuilder.RefitControlDirection
-
v
- V - Static variable in class nxopen.geometricutilities.SelectDividingObjectBuilder.IsoparametricDirectionType
-
- V - Static variable in class nxopen.Offset.OnFaceOption
-
Creates offset representing curvature in V parameter direction on face.
- v1 - Variable in class nxopen.uf.UFModeling.AskFacePropsData
-
- V1POINT - Static variable in class nxopen.features.vehicledesign.VisionPlaneBuilder.EnumEyeType
-
v1 point
- V1POINT - Static variable in class nxopen.features.vehicledesign.WindshieldDatumBuilder.EnumEyeType
-
v1 point
- v2 - Variable in class nxopen.uf.UFModeling.AskFacePropsData
-
- V2POINT - Static variable in class nxopen.features.vehicledesign.VisionPlaneBuilder.EnumEyeType
-
v2 point
- V2POINT - Static variable in class nxopen.features.vehicledesign.WindshieldDatumBuilder.EnumEyeType
-
v2 point
- VA - Static variable in class nxopen.cae.responsesimulation.RSEventSolverParameters.DdamCoefficientType
-
- VALID - Static variable in class nxopen.cae.optimization.TBSOptimizationSolution.ResultStatus
-
The result is valid
- VALID - Static variable in class nxopen.die.DieBuildStatusOption
-
Sub feature has built successfully.
- valid - Variable in class nxopen.display.PlanarShipGridBuilder.ExtentData
-
Flag indicating whether the corner points are valid
- valid() - Method in interface nxopen.features.shipdesign.PlaneListBuilder
-
Returns the indication if the defined plane is valid or not.
- VALID - Static variable in class nxopen.routing.Run.Status
-
Run is valid.
- VALID_SXLINE - Static variable in class nxopen.uf.UFDraw.SxlineStatus
-
- validate() - Method in interface nxopen.geometricutilities.IComponentBuilder
-
Validate whether the inputs to the component are sufficient for
commit to be called.
- validateAlternatePartId(Tag, String, String, String, String) - Method in interface nxopen.uf.UFUgmgr
-
- ValidateAlternatePartIdData() - Constructor for class nxopen.uf.UFUgmgr.ValidateAlternatePartIdData
-
- validateBlindVolumes() - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder
-
Validate blind volume area from driver side view.
- validateBody(int, Tag[]) - Method in interface nxopen.uf.UFModeling
-
- validateBuilderData() - Method in interface nxopen.features.sheetmetal.BeadBuilder
-
Verify whether the builder data is valid for creating a Bead or not.
- validateBuilderData() - Method in interface nxopen.features.sheetmetal.BendBuilder
-
Verify whether the builder data is valid for creating bend or not.
- validateBuilderData() - Method in interface nxopen.features.sheetmetal.BreakCornerBuilder
-
Verify that the builder data is valid for creating a break corner.
- validateBuilderData() - Method in interface nxopen.features.sheetmetal.ClosedCornerBuilder
-
Validates the builder data.
- validateBuilderData() - Method in interface nxopen.features.sheetmetal.ContourFlangeBuilder
-
Verify whether the builder data is valid for creating a Contour Flange or not.
- validateBuilderData() - Method in interface nxopen.features.sheetmetal.ConvertToSheetmetalBuilder
-
Verify that the builder data is valid for feature creation.
- validateBuilderData() - Method in interface nxopen.features.sheetmetal.DimpleBuilder
-
Verify whether the builder data is valid for creating a dimple or not.
- validateBuilderData() - Method in interface nxopen.features.sheetmetal.DrawnCutoutBuilder
-
Verify whether the builder data is valid for creating a Drawn Cutout or not.
- validateBuilderData() - Method in interface nxopen.features.sheetmetal.EdgeRipBuilder
-
Verify whether the builder data is valid for creating a Edge Rip or not.
- validateBuilderData() - Method in interface nxopen.features.sheetmetal.FlangeBuilder
-
Verify that the builder data is valid for creating a flange.
- validateBuilderData() - Method in interface nxopen.features.sheetmetal.FlatSolidBuilder
-
Validate the builder data
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- validateBuilderData() - Method in interface nxopen.features.sheetmetal.JogBuilder
-
Verify whether the builder data is valid for creating a jog or not.
- validateBuilderData() - Method in interface nxopen.features.sheetmetal.LoftedFlangeBuilder
-
Verify user data validity.
- validateBuilderData() - Method in interface nxopen.features.sheetmetal.LouverBuilder
-
This method verifies that the builder data is valid for louver creation.
- validateBuilderData() - Method in interface nxopen.features.sheetmetal.NormalCutoutBuilder
-
Verify that the builder data is valid for creating a normal cutout.
- validateBuilderData() - Method in interface nxopen.features.sheetmetal.RebendBuilder
-
Verify whether the builder data is valid for creating Rebend or not.
- validateBuilderData() - Method in interface nxopen.features.sheetmetal.TabBuilder
-
Verify whether the builder data is valid for creating a Tab or not.
- validateBuilderData() - Method in interface nxopen.features.sheetmetal.ThreeBendCornerBuilder
-
Verify that the builder data is valid for creation of a three bend corner.
- validateBuilderData() - Method in interface nxopen.features.sheetmetal.UnbendBuilder
-
Verify whether the builder data is valid for creating Unbend or not.
- validateCurves() - Method in interface nxopen.features.shipdesign.QualifySketchBuilder
-
Validates Curves.
- validatedTestResult() - Method in interface nxopen.cae.modelcheck.TestResult
-
Returns the validation result of comparing test value with the criteria value.
- validateFeatureParameters() - Method in interface nxopen.features.MeshSurfaceBuilder
-
Validate the new parameters for mesh surface editing.
- validateFunctionSyntax(String[], int) - Method in interface nxopen.uf.UFMotion
-
- validateLogicalObjectsToCommit() - Method in interface nxopen.pdm.PartOperationBuilder
-
Validates
LogicalObject
objects with this builder and udpates the operation failuers.
- validateParameterSpreadSheet() - Method in interface nxopen.features.shipdesign.QualifySketchBuilder
-
Validates parameter spreadsheet.
- validatePartAttributes() - Method in interface nxopen.features.shipdesign.QualifySketchBuilder
-
Validates the part attributes.
- validatePartRev(String, String, String) - Method in interface nxopen.uf.UFUgmgr
-
- ValidatePartRevData() - Constructor for class nxopen.uf.UFUgmgr.ValidatePartRevData
-
- validateSelection(int) - Method in interface nxopen.features.MidSurfaceByFacePairsBuilder
-
Validate and filter out invalid items from the selection list
License requirements: solid_modeling ("SOLIDS MODELING")
.
- validateSketchCurves() - Method in interface nxopen.features.shipdesign.QualifySketchBuilder
-
Validates the sketch curves.
- validateString(String, int) - Method in interface nxopen.uf.UFUgmgr
-
- validateType() - Method in interface nxopen.features.vehicledesign.CloseRangeDemoCylinderListItemBuilder
-
Returns the validate checking types to define the close range visibility for the demo cylinders.
- validation() - Method in interface nxopen.cae.SimLoadRecipe
-
Validation of the Load Recipe
License requirements: nx_masterfem ("Finite Element Modeling")
.
- Validation - Interface in nxopen
-
- Validation.InputType - Class in nxopen
-
Specifies the input type
- Validation.LookupIntegerData - Class in nxopen
-
- Validation.LookupNumberData - Class in nxopen
-
- Validation.LookupTextData - Class in nxopen
-
- Validation.LookupTimeData - Class in nxopen
-
- Validation.MapType - Class in nxopen
-
Specifies the map types
- Validation.Result - Class in nxopen
-
Specifies result of the validation
- Validation.UpdateTime - Class in nxopen
-
Specifies when to validate
- VALIDATION_LOG - Static variable in class nxopen.issue.IssueAttachment.Type
-
Validation log file
- VALIDATION_RESULT - Static variable in class nxopen.issue.IssueAttachment.Type
-
ValidationResult object type
- VALIDATION_RESULTS - Static variable in class nxopen.issue.IssueFolder.Type
-
ValidationResult type
- validationBasisEffectivityFormula() - Method in interface nxopen.BasicEffectivityBuilder
-
Returns the string representation of validation basis effectivity
License requirements: None.
- ValidationCollection - Interface in nxopen
-
- validationManager() - Method in interface nxopen.Session
-
- ValidationManager - Interface in nxopen.validate
-
Represents an object that manages validator and parser associated instance objects.
- ValidationOpts() - Constructor for class nxopen.uf.UFClone.ValidationOpts
-
- ValidationOpts(UFClone.ValidationMode, String, boolean, boolean) - Constructor for class nxopen.uf.UFClone.ValidationOpts
-
- validationProperties() - Method in interface nxopen.Step203Creator
-
Returns the validation properties - if set to true validation properties will be created
License requirements: None.
- validationProperties() - Method in interface nxopen.Step214Creator
-
Returns the validation properties - if set to true validation properties will be created
License requirements: None.
- validationRule - Variable in class nxopen.uf.UFClone.ValidationOpts
-
- validations() - Method in interface nxopen.BasePart
-
Returns the validation for this part .
- Validator - Interface in nxopen.validate
-
- validatorOptions() - Method in interface nxopen.validate.Validator
-
Returns the run options.
- ValidatorOptions - Interface in nxopen.validate
-
Contains information about run options of check-mate checking process.
- ValidatorOptions.LogModeTypes - Class in nxopen.validate
-
The log mode type.
- ValidatorOptions.ResultsDisplayModeTypes - Class in nxopen.validate
-
The results display mode type.
- ValidatorOptions.SaveModeTypes - Class in nxopen.validate
-
The save mode type.
- validCheck() - Method in interface nxopen.tooling.ToolingManager
-
Returns the ValidCheckCollection instance belonging to this part .
- ValidCheckBuilder - Interface in nxopen.tooling
-
- ValidCheckBuilder.AnalysisMode - Class in nxopen.tooling
-
the analysis mode, including solid-based mode and facet-based mode
- ValidCheckBuilder.CheckingType - Class in nxopen.tooling
-
the checking type, including true body, false body or both
- ValidCheckBuilder.SelMode - Class in nxopen.tooling
-
the selection type, including component and solid body
- ValidCheckCollection - Interface in nxopen.tooling
-
Represents a collection of ValidCheck
To obtain an instance of this class, refer to
ToolingManager
Created in NX6.0.0
- validcornerpoints - Variable in class nxopen.display.BoundedGridBuilder.CornerPointsData
-
Flag indicating whether the
corner points are valid
- validFace() - Method in interface nxopen.features.shipdesign.MaterialAllowanceBuilder
-
Returns the faces to set the material.
- validityFlag() - Method in interface nxopen.features.SectionInertiaAnalysisBuilder
-
Returns the validity flag.
- validpoints - Variable in class nxopen.routing.ManualRouteBuilder.CreateValidPointsOnPathsData
-
- valleyMergeDistance() - Method in interface nxopen.cam.CleanupOutput
-
Returns the builder of Valley Merge, Cleanup Geometry Output
License requirements: None.
- valleyOverlapDistance() - Method in interface nxopen.cam.CleanupOutput
-
Returns the builder of Valley Overlap, Cleanup Geometry Output
License requirements: None.
- valleyOverlapDistance() - Method in interface nxopen.cam.MillCutParameters
-
Returns the valley overlap distance
License requirements: None.
- valleys() - Method in interface nxopen.cam.CleanupSettings
-
Returns the Valleys, Cleanup Geometry Settings
License requirements: None.
- value() - Method in interface nxopen.annotations.SelectDimension
-
Returns the object being selected
License requirements: None.
- value() - Method in interface nxopen.annotations.SymbolCatalogParameterBuilder
-
Returns the value string of the parameter,
NOTE: Client must free the returned char* with SM_free
License requirements: None.
- Value - Class in nxopen.annotations
-
Specifies the value data
- Value() - Constructor for class nxopen.annotations.Value
-
- Value(double, Expression, int) - Constructor for class nxopen.annotations.Value
-
Constructor for the Value object.
- value() - Method in interface nxopen.assemblies.SelectComponent
-
Returns the object being selected
License requirements: None.
- value() - Method in interface nxopen.blockstyler.AngularDimension
-
Returns the Value.
- value() - Method in interface nxopen.blockstyler.DoubleBlock
-
Returns the Value
License requirements: None.
- value() - Method in interface nxopen.blockstyler.ExpressionBlock
-
Returns the Value.
- value() - Method in interface nxopen.blockstyler.IntegerBlock
-
Returns the Value
License requirements: None.
- value() - Method in interface nxopen.blockstyler.LinearDimension
-
Returns the Value.
- value() - Method in interface nxopen.blockstyler.OnPathDimension
-
Returns the Value.
- value() - Method in interface nxopen.blockstyler.RadiusDimension
-
Returns the Value.
- value() - Method in interface nxopen.blockstyler.RGBColorPicker
-
Returns the Value
License requirements: None.
- value() - Method in interface nxopen.blockstyler.StringBlock
-
Returns the Value
License requirements: None.
- value() - Method in interface nxopen.blockstyler.Toggle
-
Returns the Value
License requirements: None.
- value() - Method in interface nxopen.cae.BaseIteration
-
Returns the iteration value
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- VALUE - Static variable in class nxopen.cae.Post.AnimationIterationTypes
-
- VALUE - Static variable in class nxopen.cae.PostGraphAcrossIterationsBuilder.IterationLabelingOption
-
- value - Variable in class nxopen.cae.Result.AskResultLoadcaseValueData
-
- value - Variable in class nxopen.cae.ResultAccess.AskElementNodalResultAllComponentsData
-
the array size will be numComponents x totalNodes
- value - Variable in class nxopen.cae.ResultAccess.AskElementNodalResultData
-
Values at each node
- value() - Method in interface nxopen.cae.SelectCAEBody
-
Returns the object being selected
License requirements: None.
- value() - Method in interface nxopen.cae.SelectCAEEdge
-
Returns the object being selected
License requirements: None.
- value() - Method in interface nxopen.cae.SelectCAEFace
-
Returns the object being selected
License requirements: None.
- VALUE - Static variable in class nxopen.cam.ArcOutputTypeCiBuilder.SplineFitToleranceTypes
-
part units
- value() - Method in interface nxopen.cam.BoundaryTurnMemberFineFinishOffset
-
Returns the offset value
License requirements: None.
- value - Variable in class nxopen.cam.CAMObject.FeedRateData
-
the feed rate value
- value - Variable in class nxopen.cam.CAMObject.WireEdmFeedRateData
-
the feed rate value
- value() - Method in interface nxopen.cam.CutAngle
-
Returns the cut angle value
License requirements: None.
- value - Variable in class nxopen.cam.DoubleIntentData
-
double value
- value - Variable in class nxopen.cam.DoubleStatusData
-
double value
- value - Variable in class nxopen.cam.FeedStatusData
-
double value
- value() - Method in interface nxopen.cam.FinishDwell
-
Returns the dwell after finish/profile cut
License requirements: cam_base ("CAM BASE")
.
- value() - Method in interface nxopen.cam.InferredDouble
-
Returns the current value
License requirements: None.
- value() - Method in interface nxopen.cam.InheritableBoolBuilder
-
Returns the current value
License requirements: None.
- value() - Method in interface nxopen.cam.InheritableDoubleBuilder
-
Returns the current value
License requirements: None.
- value() - Method in interface nxopen.cam.InheritableFeedBuilder
-
Returns the current value
License requirements: None.
- value() - Method in interface nxopen.cam.InheritableFeedModeBuilder
-
Returns the current value
License requirements: None.
- value() - Method in interface nxopen.cam.InheritableIntBuilder
-
Returns the current value
License requirements: None.
- value() - Method in interface nxopen.cam.InheritableTextBuilder
-
Returns the current value
License requirements: None.
- value() - Method in interface nxopen.cam.InspectionAxisExtrapolationModeBuilder
-
Returns the current axis extrapolation mode
License requirements: None.
- value() - Method in interface nxopen.cam.InspectionCylinderCircleFitModeBuilder
-
Returns the current cylinder/circle fitting mode
License requirements: None.
- value() - Method in interface nxopen.cam.InspectionDatumPlaneFittingModeBuilder
-
Returns the current datum plane fitting mode
License requirements: None.
- value() - Method in interface nxopen.cam.InspectionLimitsOfSizeModeBuilder
-
Returns the current limits of size mode
License requirements: None.
- value() - Method in interface nxopen.cam.InspectionProbeTipTypeBuilder
-
Returns the preferred probe tip type
License requirements: None.
- value() - Method in interface nxopen.cam.InspectionProfileDispositionModeBuilder
-
Returns the current profile disposition mode
License requirements: None.
- value() - Method in interface nxopen.cam.InspectionReferenceFeatureModeBuilder
-
Returns the current reference feature mode
License requirements: None.
- value() - Method in interface nxopen.cam.InspectionSensorStrategyBuilder
-
Returns the current sensor strategy
License requirements: None.
- value() - Method in interface nxopen.cam.InspectionSurfaceProfileModeBuilder
-
Returns the current surface profile mode
License requirements: None.
- value - Variable in class nxopen.cam.IntStatusData
-
integer value
- value - Variable in class nxopen.die.DrawDiePunchSectionBuilder.FormingAttributesData
-
Value of attribute.
- value - Variable in class nxopen.die.DrawDiePunchSectionBuilder.PunchProfileAttributesData
-
Value of attribute.
- value - Variable in class nxopen.die.HoleChildBuilder.HoleAttributesData
-
Value of attribute.
- value - Variable in class nxopen.die.HoleChildBuilder.PadAttributesData
-
Value of attribute.
- value - Variable in class nxopen.die.HoleParentBuilder.HoleAttributesData
-
Value of attribute.
- value - Variable in class nxopen.die.HoleParentBuilder.PadAttributesData
-
Value of attribute.
- value - Variable in class nxopen.die.KeywayChildBuilder.SlotAttributesData
-
Value of attribute.
- value - Variable in class nxopen.die.KeywayParentBuilder.SlotAttributesData
-
Value of attribute.
- value - Variable in class nxopen.die.PadChildBuilder.HoleAttributesData
-
Value of attribute.
- value - Variable in class nxopen.die.PadChildBuilder.PadAttributesData
-
Value of attribute.
- value - Variable in class nxopen.die.PadParentBuilder.HoleAttributesData
-
Value of attribute.
- value - Variable in class nxopen.die.PadParentBuilder.PadAttributesData
-
Value of attribute.
- value - Variable in class nxopen.die.PierceHoleChildBuilder.HoleAttributesData
-
value of attribute
- value - Variable in class nxopen.die.PierceHoleParentBuilder.HoleAttributesData
-
value of attribute
- value - Variable in class nxopen.die.RotorSectionBuilder.RotorAttributesData
-
value of attribute
- value - Variable in class nxopen.die.SteelInsertSectionBuilder.FormingAttributesData
-
value of attribute
- value - Variable in class nxopen.die.ThroatChildBuilder.ExtensionAttributesData
-
Value of attribute.
- value - Variable in class nxopen.die.ThroatParentBuilder.ExtensionAttributesData
-
Value of attribute.
- value - Variable in class nxopen.die.WearPlateLocChildBuilder.PadAttributesData
-
value of attribute
- value - Variable in class nxopen.die.WearPlateLocParentBuilder.PadAttributesData
-
value of attribute
- value() - Method in interface nxopen.drafting.AttributeItemBuilder
-
Returns the value.
- value() - Method in interface nxopen.drawings.SelectDraftingView
-
Returns the object being selected
License requirements: None.
- value() - Method in interface nxopen.drawings.SelectDrawingRegion
-
Returns the object being selected
License requirements: None.
- value() - Method in interface nxopen.drawings.SelectDrawingView
-
Returns the object being selected
License requirements: None.
- value() - Method in interface nxopen.drawings.SelectSectionLine
-
Returns the object being selected
License requirements: None.
- value() - Method in interface nxopen.Expression
-
Returns the value of the expression in base units.
- value() - Method in interface nxopen.facet.SelectFacetedBody
-
Returns the object being selected
License requirements: None.
- VALUE - Static variable in class nxopen.features.CircularBlendCurveBuilder.CylinderRadiusOption
-
Radius by value
- value() - Method in interface nxopen.features.DimensionBuilder
-
Returns the value of the dimension
License requirements: None.
- VALUE - Static variable in class nxopen.features.HolePackageBuilder.HoleDepthLimitOptions
-
Value limit options
- value() - Method in interface nxopen.features.ResizeCurveBuilder
-
Returns the value to resize
License requirements: None.
- value() - Method in interface nxopen.features.SelectFlatPattern
-
Returns the object being selected
License requirements: None.
- value() - Method in interface nxopen.features.SelectPartModule
-
Returns the object being selected
License requirements: None.
- VALUE - Static variable in class nxopen.features.sheetmetal.AeroFlangeBuilder.LengthType
-
Value
- value() - Method in interface nxopen.features.sheetmetal.BreakCornerBuilder
-
Returns the fillet radius or the setback value, depending on the type of the break corner.
- value() - Method in interface nxopen.features.sheetmetal.CornerTreatmentBuilder
-
Returns the value associated with the chamfer and radius treatment types
License requirements: None.
- VALUE - Static variable in class nxopen.features.shipdesign.EndCutBuilder.LimitTypes
-
If this Limit Type is set, the values of Tilt Angle and Shear Angle expressions will be used.
- value() - Method in interface nxopen.features.shipdesign.ShipNameFieldBuilder
-
Returns the field value.
- VALUE - Static variable in class nxopen.features.shipdesign.StiffenerLimitBuilder.LimitType
-
Trim or extend by a fixed distance value.
- VALUE - Static variable in class nxopen.geometricutilities.CurveExtendData.LimitOptions
-
Value
- VALUE - Static variable in class nxopen.geometricutilities.EndHoleData.HoleDepthLimitOptions
-
Value limit options
- VALUE - Static variable in class nxopen.geometricutilities.Extend.ExtendType
-
- value() - Method in interface nxopen.geometricutilities.Extend
-
- value() - Method in interface nxopen.geometricutilities.LawBuilder
-
Returns the constant value.
- value() - Method in interface nxopen.geometricutilities.OnPathDimWithValueBuilder
-
Returns the value expression
License requirements: None.
- VALUE - Static variable in class nxopen.geometricutilities.ReduceSurfaceRadiusBuilder.ReduceValueTypeSpecification
-
- value() - Method in interface nxopen.geometricutilities.RotationSetBuilder
-
Returns the value expression
License requirements: None.
- value() - Method in interface nxopen.layout2d.SelectComponent
-
Returns the object being selected
License requirements: None.
- value - Variable in class nxopen.mechatronics.ParameterStockBuilder.BoolParameterData
-
- value - Variable in class nxopen.mechatronics.ParameterStockBuilder.IntParameterData
-
- value - Variable in class nxopen.mechatronics.ParameterStockBuilder.RealParameterData
-
- value - Variable in class nxopen.mechatronics.ParameterStockBuilder.StringParameterData
-
- value() - Method in interface nxopen.mechatronics.SelectAdapterSignal
-
Returns the object being selected
License requirements: None.
- value() - Method in interface nxopen.mechatronics.SelectCollisionSensor
-
Returns the object being selected
License requirements: None.
- value() - Method in interface nxopen.mechatronics.SelectPhysicsConstraint
-
Returns the object being selected
License requirements: None.
- value() - Method in interface nxopen.mechatronics.SelectPhysicsJoint
-
Returns the object being selected
License requirements: None.
- value() - Method in interface nxopen.mechatronics.SelectRigidBody
-
Returns the object being selected
License requirements: None.
- value() - Method in interface nxopen.mechatronics.SelectSystemObject
-
Returns the object being selected
License requirements: None.
- value() - Method in interface nxopen.mechatronics.SelectTagFormObject
-
Returns the object being selected
License requirements: None.
- value() - Method in interface nxopen.motion.SelectJoint
-
Returns the object being selected
License requirements: None.
- value() - Method in interface nxopen.motion.SelectLink
-
Returns the object being selected
License requirements: None.
- value() - Method in interface nxopen.motion.SelectMarker
-
Returns the object being selected
License requirements: None.
- value - Variable in class nxopen.options.OptionsManager.ReorderSelectableStringListValueData
-
Option value
- value() - Method in interface nxopen.partfamily.FamilyAttribute
-
Returns the value of the given attribute
License requirements: solid_modeling ("SOLIDS MODELING")
.
- VALUE - Static variable in class nxopen.preferences.SketchPreferences.DimensionLabelType
-
Displays the numerical value of the expression
- value - Variable in class nxopen.preferences.ViewVisualizationSpecialEffects.ColorHSV
-
Value in HSV pattern is the brightness of the color Ranges from 0-255
- value() - Method in interface nxopen.routing.SelectControlPoint
-
Returns the object being selected
License requirements: None.
- value() - Method in interface nxopen.routing.SelectISegment
-
Returns the object being selected
License requirements: None.
- value() - Method in interface nxopen.routing.SelectLineSegment
-
Returns the object being selected
License requirements: None.
- value() - Method in interface nxopen.routing.SelectRun
-
Returns the object being selected
License requirements: None.
- value() - Method in interface nxopen.routing.SelectStock
-
Returns the object being selected
License requirements: None.
- value - Variable in class nxopen.RuleManager.DebugRule
-
value of rule
- value() - Method in interface nxopen.Scalar
-
Returns the value of a scalar.
- value() - Method in interface nxopen.SelectBody
-
Returns the object being selected
License requirements: None.
- value() - Method in interface nxopen.SelectCartesianCoordinateSystem
-
Returns the object being selected
License requirements: None.
- value() - Method in interface nxopen.SelectCoordinateSystem
-
Returns the object being selected
License requirements: None.
- value() - Method in interface nxopen.SelectCurve
-
Returns the object being selected
License requirements: None.
- value() - Method in interface nxopen.SelectDatumPlane
-
Returns the object being selected
License requirements: None.
- value() - Method in interface nxopen.SelectDisplayableObject
-
Returns the object being selected
License requirements: None.
- value() - Method in interface nxopen.SelectEdge
-
Returns the object being selected
License requirements: None.
- value() - Method in interface nxopen.SelectFace
-
Returns the object being selected
License requirements: None.
- value() - Method in interface nxopen.SelectIBaseCurve
-
Returns the object being selected
License requirements: None.
- value() - Method in interface nxopen.SelectICurve
-
Returns the object being selected
License requirements: None.
- value() - Method in interface nxopen.SelectIParameterizedSurface
-
Returns the object being selected
License requirements: None.
- value() - Method in interface nxopen.SelectISurface
-
Returns the object being selected
License requirements: None.
- value() - Method in interface nxopen.SelectLine
-
Returns the object being selected
License requirements: None.
- value() - Method in interface nxopen.SelectNXObject
-
Returns the object being selected
License requirements: None.
- value() - Method in interface nxopen.SelectObject
-
Returns the object being selected
License requirements: None.
- value() - Method in interface nxopen.SelectPart
-
Returns the object being selected
License requirements: None.
- value() - Method in interface nxopen.SelectPoint
-
Returns the object being selected
License requirements: None.
- value() - Method in interface nxopen.SelectSketch
-
Returns the object being selected
License requirements: None.
- value() - Method in interface nxopen.SelectSmartObject
-
Returns the object being selected
License requirements: None.
- value() - Method in interface nxopen.SelectSpline
-
Returns the object being selected
License requirements: None.
- value() - Method in interface nxopen.SelectTaggedObject
-
Returns the object being selected
License requirements: None.
- value() - Method in interface nxopen.SelectView
-
Returns the object being selected
License requirements: None.
- VALUE - Static variable in class nxopen.sim.SimDebugBuilder.PrintoutTagsOrPointersType
-
Value
- value - Variable in class nxopen.Tag
-
An integer value for the tag.
- value - Variable in class nxopen.uf.UFAttr.GetBoolUserAttributeData
-
- value - Variable in class nxopen.uf.UFAttr.GetComputationalTimeUserAttributeData
-
- value - Variable in class nxopen.uf.UFAttr.GetIntegerUserAttributeData
-
- value - Variable in class nxopen.uf.UFAttr.GetRealUserAttributeData
-
- value - Variable in class nxopen.uf.UFCurve.Constraint
-
- value - Variable in class nxopen.uf.UFCurve.HelpData
-
- value - Variable in class nxopen.uf.UFCurve.Limit
-
- value - Variable in class nxopen.uf.UFCurve.State
-
- value - Variable in class nxopen.uf.UFFam.AttributeData
-
- value - Variable in class nxopen.uf.UFGdt.ProjZone
-
- value - Variable in class nxopen.uf.UFGdt.ToleranceValue
-
- value - Variable in class nxopen.uf.UFGdt.ToleranceZone
-
- value - Variable in class nxopen.uf.UFModl.DfoConstraint
-
- value - Variable in class nxopen.uf.UFModl.DimensionData
-
- value - Variable in class nxopen.uf.UFModl.MethodList
-
- value - Variable in class nxopen.uf.UFModlFeatures.AskRuled1Data
-
- value - Variable in class nxopen.uf.UFModlFeatures.AskRuledData
-
- value - Variable in class nxopen.uf.UFModlFeatures.AskThruCurves1Data
-
- value - Variable in class nxopen.uf.UFModlFeatures.AskThruCurvesData
-
- value - Variable in class nxopen.uf.UFPd.BusinessModifier
-
- value - Variable in class nxopen.uf.UFSket.AskDimStatusData
-
- VALUE - Static variable in class nxopen.visualreporting.Classifier.TypeOption
-
Value classifier type
- value() - Method in interface nxopen.visualreporting.Condition
-
- value() - Method in interface nxopen.visualreporting.GroupLabel
-
Returns the value of the
GroupLabel
(if it is being grouped by value)
License requirements: None.
- value() - Method in interface nxopen.weld.SelectDatumPin
-
Returns the object being selected
License requirements: None.
- value() - Method in interface nxopen.weld.SelectDatumSurface
-
Returns the object being selected
License requirements: None.
- value0() - Method in interface nxopen.cam.Inheritable2dLength
-
Returns the attribute value for index 0
License requirements: None.
- value1() - Method in interface nxopen.cam.Inheritable2dLength
-
Returns the attribute value for index 1
License requirements: None.
- VALUE_CHANGED_REASON - Static variable in class nxopen.uistyler.StylerEvent.Reason
-
Value changed reason
- VALUE_CONDITION - Static variable in class nxopen.visualreporting.Condition.TypeOption
-
- VALUE_OUT_OF_RANGE - Static variable in class nxopen.uf.UFConstants
-
- valueA() - Method in interface nxopen.features.GeneralConicBuilder
-
Returns the coefficient value for a.
- valueAlias() - Method in interface nxopen.AttributePropertiesBaseBuilder
-
Returns the value alias.
- valueAsString() - Method in interface nxopen.blockstyler.Enumeration
-
Returns the Value as string.
- valueAsString() - Method in interface nxopen.blockstyler.LineFont
-
Returns the value
License requirements: None.
- valueB() - Method in interface nxopen.features.GeneralConicBuilder
-
Returns the coefficient value for b.
- valueC() - Method in interface nxopen.features.GeneralConicBuilder
-
Returns the coefficient value for c.
- valueChanged(StylerEvent) - Method in interface nxopen.uistyler.ColorTool.ValueChanged
-
Called when a dialog user enters a valid color value.
- valueChanged(StylerEvent) - Method in interface nxopen.uistyler.IntegerScale.ValueChanged
-
Called when a dialog user moves the slider to a new position.
- valueChanged(StylerEvent) - Method in interface nxopen.uistyler.OptionToggle.ValueChanged
-
Called when a dialog user clicks on the button or presses the spacebar when the button has keyboard focus.
- valueChanged(StylerEvent) - Method in interface nxopen.uistyler.RadioBox.ValueChanged
-
Called when a dialog user click on a button in the radio box.
- valueChanged(StylerEvent) - Method in interface nxopen.uistyler.RealScale.ValueChanged
-
License requirements: None.
- valueChanged(StylerEvent) - Method in interface nxopen.uistyler.Toggle.ValueChanged
-
Called when a dialog user clicks on the button or presses the spacebar when the button has keyboard focus.
- valueChanged() - Method in interface nxopen.weld.CharacteristicsValueBuilder
-
Returns the indication if the attribute value has been changed.
- valueCount - Variable in class nxopen.uf.UFFam.MemberData
-
- valueD() - Method in interface nxopen.features.GeneralConicBuilder
-
Returns the coefficient value for d.
- ValueData() - Constructor for class nxopen.annotations.SelectDimension.ValueData
-
- ValueData() - Constructor for class nxopen.assemblies.SelectComponent.ValueData
-
- ValueData() - Constructor for class nxopen.cae.SelectCAEBody.ValueData
-
- ValueData() - Constructor for class nxopen.cae.SelectCAEEdge.ValueData
-
- ValueData() - Constructor for class nxopen.cae.SelectCAEFace.ValueData
-
- ValueData() - Constructor for class nxopen.drawings.SelectDraftingView.ValueData
-
- ValueData() - Constructor for class nxopen.drawings.SelectDrawingRegion.ValueData
-
- ValueData() - Constructor for class nxopen.drawings.SelectDrawingView.ValueData
-
- ValueData() - Constructor for class nxopen.drawings.SelectSectionLine.ValueData
-
- ValueData() - Constructor for class nxopen.facet.SelectFacetedBody.ValueData
-
- ValueData() - Constructor for class nxopen.features.SelectFlatPattern.ValueData
-
- ValueData() - Constructor for class nxopen.features.SelectPartModule.ValueData
-
- ValueData() - Constructor for class nxopen.layout2d.SelectComponent.ValueData
-
- ValueData() - Constructor for class nxopen.mechatronics.SelectAdapterSignal.ValueData
-
- ValueData() - Constructor for class nxopen.mechatronics.SelectCollisionSensor.ValueData
-
- ValueData() - Constructor for class nxopen.mechatronics.SelectPhysicsConstraint.ValueData
-
- ValueData() - Constructor for class nxopen.mechatronics.SelectPhysicsJoint.ValueData
-
- ValueData() - Constructor for class nxopen.mechatronics.SelectRigidBody.ValueData
-
- ValueData() - Constructor for class nxopen.mechatronics.SelectSystemObject.ValueData
-
- ValueData() - Constructor for class nxopen.mechatronics.SelectTagFormObject.ValueData
-
- ValueData() - Constructor for class nxopen.motion.SelectJoint.ValueData
-
- ValueData() - Constructor for class nxopen.motion.SelectLink.ValueData
-
- ValueData() - Constructor for class nxopen.motion.SelectMarker.ValueData
-
- ValueData() - Constructor for class nxopen.routing.SelectControlPoint.ValueData
-
- ValueData() - Constructor for class nxopen.routing.SelectISegment.ValueData
-
- ValueData() - Constructor for class nxopen.routing.SelectLineSegment.ValueData
-
- ValueData() - Constructor for class nxopen.routing.SelectRun.ValueData
-
- ValueData() - Constructor for class nxopen.routing.SelectStock.ValueData
-
- ValueData() - Constructor for class nxopen.SelectBody.ValueData
-
- ValueData() - Constructor for class nxopen.SelectCartesianCoordinateSystem.ValueData
-
- ValueData() - Constructor for class nxopen.SelectCoordinateSystem.ValueData
-
- ValueData() - Constructor for class nxopen.SelectCurve.ValueData
-
- ValueData() - Constructor for class nxopen.SelectDatumPlane.ValueData
-
- ValueData() - Constructor for class nxopen.SelectDisplayableObject.ValueData
-
- ValueData() - Constructor for class nxopen.SelectEdge.ValueData
-
- ValueData() - Constructor for class nxopen.SelectFace.ValueData
-
- ValueData() - Constructor for class nxopen.SelectIBaseCurve.ValueData
-
- ValueData() - Constructor for class nxopen.SelectICurve.ValueData
-
- ValueData() - Constructor for class nxopen.SelectIParameterizedSurface.ValueData
-
- ValueData() - Constructor for class nxopen.SelectISurface.ValueData
-
- ValueData() - Constructor for class nxopen.SelectLine.ValueData
-
- ValueData() - Constructor for class nxopen.SelectNXObject.ValueData
-
- ValueData() - Constructor for class nxopen.SelectObject.ValueData
-
- ValueData() - Constructor for class nxopen.SelectPart.ValueData
-
- ValueData() - Constructor for class nxopen.SelectPoint.ValueData
-
- ValueData() - Constructor for class nxopen.SelectSketch.ValueData
-
- ValueData() - Constructor for class nxopen.SelectSmartObject.ValueData
-
- ValueData() - Constructor for class nxopen.SelectSpline.ValueData
-
- ValueData() - Constructor for class nxopen.SelectTaggedObject.ValueData
-
- ValueData() - Constructor for class nxopen.SelectView.ValueData
-
- ValueData() - Constructor for class nxopen.weld.SelectDatumPin.ValueData
-
- ValueData() - Constructor for class nxopen.weld.SelectDatumSurface.ValueData
-
- valueDats - Variable in class nxopen.uf.UFPd.ProductAttribute
-
- valueDats - Variable in class nxopen.uf.UFPd.ProductAttribute2
-
- valueDisplayFlag() - Method in interface nxopen.cae.SimBCDisplay
-
Returns the true/false flag based on whether the value of the BC is
displayed in the graphics window
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- valueDouble() - Method in interface nxopen.weld.CharacteristicsValueBuilder
-
Returns the value of this attribute when AttributeType is Weld.CharacteristicsValueBuilder.Type#DOUBLE
.
- valueE() - Method in interface nxopen.features.GeneralConicBuilder
-
Returns the coefficient value for e.
- valueExpression - Variable in class nxopen.annotations.Value
-
Expression representing the value.
- valueExpression - Variable in class nxopen.features.sheetmetal.AeroFlangeBuilder.EndCompensationData
-
compensation expression
- valueExpression() - Method in interface nxopen.geometricutilities.InstanceEditedExpressionItem
-
Returns the edited value expression for the master expression
License requirements: None.
- valueExpression() - Method in interface nxopen.motion.ScalarForceBuilder
-
Returns the value expression
License requirements: None.
- valueExpression() - Method in interface nxopen.motion.ScalarTorqueBuilder
-
Returns the value expression
License requirements: None.
- valueF() - Method in interface nxopen.features.GeneralConicBuilder
-
Returns the coefficient value for f.
- valueFormat() - Method in interface nxopen.drawings.ViewDetailLabelBuilder
-
Returns the value format
License requirements: None.
- valueFormat() - Method in interface nxopen.drawings.ViewLabelBuilder
-
Returns the value format
License requirements: None.
- valueFormat() - Method in interface nxopen.drawings.ViewSectionLabelBuilder
-
Returns the section vw label scale value format
License requirements: None.
- valueInteger() - Method in interface nxopen.weld.CharacteristicsValueBuilder
-
Returns the value of this attribute when AttributeType is Weld.CharacteristicsValueBuilder.Type#INTEGER
.
- valueOf(int) - Static method in class nxopen.annotations.AlignmentPosition
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.AlignmentPosition
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.AngularDimensionFormat
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.AngularDimensionFormat
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.AngularSuppressZeros
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.AngularSuppressZeros
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.ArcComponent.ArcType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.ArcComponent.ArcType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.AreaFillMaterial
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.AreaFillMaterial
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.ArrowDisplay
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.ArrowDisplay
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.ArrowheadType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.ArrowheadType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.AssociativeOriginType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.AssociativeOriginType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.AssociativeText.PropertyType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.AssociativeText.PropertyType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.AssociativityLineOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.AssociativityLineOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.AssociativityPointOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.AssociativityPointOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.AutomaticCenterlineBuilder.CenterlineThickness
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.AutomaticCenterlineBuilder.CenterlineThickness
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.BaseCustomSymbolBuilder.AnnotationPreferences
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.BaseCustomSymbolBuilder.AnnotationPreferences
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.BaseCustomSymbolBuilder.GeometryPreferences
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.BaseCustomSymbolBuilder.GeometryPreferences
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.BaseFrameBarBuilder.AxisType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.BaseFrameBarBuilder.AxisType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.BaseOrdinateDimensionBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.BaseOrdinateDimensionBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.BaseSurfaceFinishBuilder.ParanthesesType
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.BaseSurfaceFinishBuilder.ParanthesesType
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.BaseSurfaceFinishBuilder.ParenthesesType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.BaseSurfaceFinishBuilder.ParenthesesType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.BaseSurfaceFinishBuilder.ToleranceOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.BaseSurfaceFinishBuilder.ToleranceOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.BillOfMaterialBuilder.DetailLevelType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.BillOfMaterialBuilder.DetailLevelType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.BillOfMaterialBuilder.FabricationNumberingType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.BillOfMaterialBuilder.FabricationNumberingType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.BillOfMaterialBuilder.StockLengthType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.BillOfMaterialBuilder.StockLengthType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.BoundaryBuilder.SelectionMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.BoundaryBuilder.SelectionMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.Centerline2dBuilder.Offset
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.Centerline2dBuilder.Offset
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.Centerline2dBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.Centerline2dBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.Centerline3dBuilder.Offset
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.Centerline3dBuilder.Offset
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.CenterlineSettingsBuilder.CenterlineThickness
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.CenterlineSettingsBuilder.CenterlineThickness
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.ChamferForm
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.ChamferForm
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.ChamferLeaderPlacement
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.ChamferLeaderPlacement
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.ChamferOrientationType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.ChamferOrientationType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.ChamferSeparatorType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.ChamferSeparatorType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.ChamferStubType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.ChamferStubType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.ChamferSymbolPlacement
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.ChamferSymbolPlacement
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.CircleCenterlineBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.CircleCenterlineBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.Constants
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.Constants
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.CuttingPlaneSymbolBuilder.TextPlaneRelativeArrow
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.CuttingPlaneSymbolBuilder.TextPlaneRelativeArrow
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.CuttingPlaneSymbolBuilder.ViewNameFormatOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.CuttingPlaneSymbolBuilder.ViewNameFormatOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.DatumReferenceBuilder.DatumReferenceMaterialCondition
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.DatumReferenceBuilder.DatumReferenceMaterialCondition
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.DatumTargetBuilder.StandardTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.DatumTargetBuilder.StandardTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.DatumTargetBuilder.TerminatorTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.DatumTargetBuilder.TerminatorTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.DatumTargetBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.DatumTargetBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.DecimalPointCharacter
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.DecimalPointCharacter
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.DiameterRadiusLeaderStub
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.DiameterRadiusLeaderStub
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.DiameterRadiusSymbolPlacement
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.DiameterRadiusSymbolPlacement
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.DiameterSymbol
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.DiameterSymbol
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.Dimension.MeasurementTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.Dimension.MeasurementTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.DimensionMeasurementBuilder.MeasurementMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.DimensionMeasurementBuilder.MeasurementMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.DimensionSetBuilder.DimensionSetMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.DimensionSetBuilder.DimensionSetMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.DimensionTextFormat
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.DimensionTextFormat
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.DimensionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.DimensionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.DimensionUnit
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.DimensionUnit
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.DisplayPmiEffectivityMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.DisplayPmiEffectivityMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.DraftingImage.FileType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.DraftingImage.FileType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.DraftingNoteBuilder.TextAlign
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.DraftingNoteBuilder.TextAlign
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.DraftingNoteBuilder.ThicknessTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.DraftingNoteBuilder.ThicknessTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.DraftingSurfaceFinishBuilder.FinishType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.DraftingSurfaceFinishBuilder.FinishType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.DrawingFormatTitleBuilder.TitleBlockPositionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.DrawingFormatTitleBuilder.TitleBlockPositionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.DrivingValueBuilder.DrivingExpressionMode
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.DrivingValueBuilder.DrivingExpressionMode
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.DrivingValueBuilder.DrivingValueMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.DrivingValueBuilder.DrivingValueMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.DualDimensionPlacement
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.DualDimensionPlacement
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.EditSymbolDisplayBuilder.FontTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.EditSymbolDisplayBuilder.FontTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.EditSymbolDisplayBuilder.WidthTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.EditSymbolDisplayBuilder.WidthTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.ExtensionLineDisplay
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.ExtensionLineDisplay
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.FeatureControlFrameBuilder.FcfCharacteristic
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.FeatureControlFrameBuilder.FcfCharacteristic
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.FeatureControlFrameBuilder.FcfFrameStyle
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.FeatureControlFrameBuilder.FcfFrameStyle
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.FeatureControlFrameDataBuilder.AreaSymbolType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.FeatureControlFrameDataBuilder.AreaSymbolType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.FeatureControlFrameDataBuilder.ToleranceMaterialModifier
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.FeatureControlFrameDataBuilder.ToleranceMaterialModifier
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.FeatureControlFrameDataBuilder.ToleranceZoneShape
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.FeatureControlFrameDataBuilder.ToleranceZoneShape
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.FinishMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.FinishMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.FitAnsiHoleType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.FitAnsiHoleType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.FitAssemblyDisplayStyle
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.FitAssemblyDisplayStyle
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.FitDisplayStyle
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.FitDisplayStyle
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.FlipOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.FlipOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.ForeshorteningSymbolSettingsBuilder.MethodType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.ForeshorteningSymbolSettingsBuilder.MethodType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.ForeshorteningSymbolSettingsBuilder.SymbolType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.ForeshorteningSymbolSettingsBuilder.SymbolType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.FractionDenominatorFormat
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.FractionDenominatorFormat
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.FrameBarElements
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.FrameBarElements
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.GeometricCharacteristic
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.GeometricCharacteristic
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.HatchBuilder.AnnotationTypes
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.HatchBuilder.AnnotationTypes
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.HatchFillSettingsBuilder.AnnotationTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.HatchFillSettingsBuilder.AnnotationTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.HoleCalloutSettingsBuilder.Featuretype
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.HoleCalloutSettingsBuilder.Featuretype
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.HoleCalloutSettingsBuilder.LeaderAttachment
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.HoleCalloutSettingsBuilder.LeaderAttachment
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.HoleCalloutSettingsBuilder.Parametertype
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.HoleCalloutSettingsBuilder.Parametertype
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.HoleTableSettingsContentBuilder.Content
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.HoleTableSettingsContentBuilder.Content
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.HoleTableSettingsFormatBuilder.DeletedHolesDisplayType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.HoleTableSettingsFormatBuilder.DeletedHolesDisplayType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.HoleTableSettingsFormatBuilder.DepthMeasurementDatumType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.HoleTableSettingsFormatBuilder.DepthMeasurementDatumType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.HoleTableSettingsFormatBuilder.ShowColumnsType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.HoleTableSettingsFormatBuilder.ShowColumnsType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.HoleTableSettingsFormatBuilder.SizeFormatType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.HoleTableSettingsFormatBuilder.SizeFormatType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.HoleTableSettingsHoleFiltersBuilder.ScopeType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.HoleTableSettingsHoleFiltersBuilder.ScopeType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.HoleTableSettingsLabelBuilder.IndexType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.HoleTableSettingsLabelBuilder.IndexType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.HoleTableSettingsLabelBuilder.RelativeLocationType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.HoleTableSettingsLabelBuilder.RelativeLocationType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.IdentificationLineLocation
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.IdentificationLineLocation
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.IdSymbolBuilder.SymbolTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.IdSymbolBuilder.SymbolTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.ImportAutocadBlockBuilder.FileFolder
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.ImportAutocadBlockBuilder.FileFolder
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.ImportAutocadBlockBuilder.Type
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.ImportAutocadBlockBuilder.Type
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.ImportSymbolBuilder.FileFolder
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.ImportSymbolBuilder.FileFolder
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.IntersectionSymbolBuilder.Thickness
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.IntersectionSymbolBuilder.Thickness
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.JogOrientation
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.JogOrientation
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.LeaderAlignment
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.LeaderAlignment
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.LeaderAttachment
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.LeaderAttachment
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.LeaderData.ArrowheadType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.LeaderData.ArrowheadType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.LeaderData.LeaderType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.LeaderData.LeaderType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.LeaderOrientation
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.LeaderOrientation
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.LeaderSide
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.LeaderSide
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.LeaderType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.LeaderType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.LeaderVerticalAttachment
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.LeaderVerticalAttachment
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.LineComponent.LineType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.LineComponent.LineType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.LineWeldBuilder.FieldWeldType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.LineWeldBuilder.FieldWeldType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.LineWeldBuilder.IdLineType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.LineWeldBuilder.IdLineType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.LineWeldBuilder.StaggeredWeldType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.LineWeldBuilder.StaggeredWeldType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.LineWeldBuilder.TailType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.LineWeldBuilder.TailType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.LineWeldBuilder.WeldSymbolWeldAlongContourType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.LineWeldBuilder.WeldSymbolWeldAlongContourType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.LineWeldDataBuilder.ContourSymbolType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.LineWeldDataBuilder.ContourSymbolType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.LineWeldDataBuilder.FinishSymbolType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.LineWeldDataBuilder.FinishSymbolType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.LineWeldDataBuilder.WeldSizeCodeType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.LineWeldDataBuilder.WeldSizeCodeType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.LineWeldDataBuilder.WeldSymbolType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.LineWeldDataBuilder.WeldSymbolType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.LineWidth
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.LineWidth
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.MasterSymbolBuilder.LeaderAttachmentType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.MasterSymbolBuilder.LeaderAttachmentType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.MasterSymbolListItemBuilder.TextTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.MasterSymbolListItemBuilder.TextTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.MaterialConditionModifier
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.MaterialConditionModifier
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.NarrowDisplayOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.NarrowDisplayOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.NarrowTextOrientation
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.NarrowTextOrientation
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.OffsetCenterPointBuilder.Display
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.OffsetCenterPointBuilder.Display
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.OffsetCenterPointBuilder.Offset
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.OffsetCenterPointBuilder.Offset
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.OffsetCenterPointBuilder.Thickness
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.OffsetCenterPointBuilder.Thickness
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.OrdinateDoglegCreationOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.OrdinateDoglegCreationOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.OrdinateDoglegDefinition
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.OrdinateDoglegDefinition
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.OrdinateLineArrowDisplayOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.OrdinateLineArrowDisplayOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.OrdinateOriginDisplayOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.OrdinateOriginDisplayOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.OriginBuilder.AlignmentPosition
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.OriginBuilder.AlignmentPosition
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.PartsListBuilder.PartsListGrowDirectionOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.PartsListBuilder.PartsListGrowDirectionOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.PartsListBuilder.PartsListMainSymbolText
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.PartsListBuilder.PartsListMainSymbolText
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.PartsListBuilder.PartsListReferenceSymbolText
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.PartsListBuilder.PartsListReferenceSymbolText
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.PartsListBuilder.PartsListShowLockedDeletedRows
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.PartsListBuilder.PartsListShowLockedDeletedRows
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.PartsListBuilder.PartsListSymbolType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.PartsListBuilder.PartsListSymbolType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.PartsListBuilder.PartsListVerticalGroupLeaderAttachment
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.PartsListBuilder.PartsListVerticalGroupLeaderAttachment
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.PinListBuilder.FilterType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.PinListBuilder.FilterType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.PlaneBuilder.PlaneMethodType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.PlaneBuilder.PlaneMethodType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.PmiDefaultPlane
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.PmiDefaultPlane
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.PmiFilter.ComponentMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.PmiFilter.ComponentMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.PmiFilter.FilterType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.PmiFilter.FilterType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.PmiFilterByType.Type
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.PmiFilterByType.Type
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.PmiResizeMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.PmiResizeMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.RadiusDimensionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.RadiusDimensionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.RadiusSymbol
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.RadiusSymbol
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.RegionBuilder.AlignmentPosition
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.RegionBuilder.AlignmentPosition
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.RegionBuilder.CrosshatchPatterns
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.RegionBuilder.CrosshatchPatterns
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.RegionBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.RegionBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.SearchCriteriaCalloutBuilder.CalloutTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.SearchCriteriaCalloutBuilder.CalloutTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.SearchCriteriaDatumTargetBuilder.DatumTargetMovableOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.SearchCriteriaDatumTargetBuilder.DatumTargetMovableOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.SearchCriteriaDatumTargetBuilder.DatumTargetTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.SearchCriteriaDatumTargetBuilder.DatumTargetTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.SearchCriteriaDimensionBuilder.DiameterSymbolOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.SearchCriteriaDimensionBuilder.DiameterSymbolOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.SearchCriteriaDimensionBuilder.DimensionTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.SearchCriteriaDimensionBuilder.DimensionTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.SearchCriteriaDimensionBuilder.MeasurementTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.SearchCriteriaDimensionBuilder.MeasurementTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.SearchCriteriaDimensionBuilder.RadialSymbolOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.SearchCriteriaDimensionBuilder.RadialSymbolOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.SearchCriteriaDimensionBuilder.ToleranceTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.SearchCriteriaDimensionBuilder.ToleranceTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.CharacteristicOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.CharacteristicOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.CircleUOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.CircleUOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.FrameStyleOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.FrameStyleOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.FreeStateOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.FreeStateOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.PrimaryDatumDualMCMOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.PrimaryDatumDualMCMOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.PrimaryDatumMCMOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.PrimaryDatumMCMOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.ProjectedOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.ProjectedOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.SecondaryDatumDualMCMOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.SecondaryDatumDualMCMOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.SecondaryDatumMCMOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.SecondaryDatumMCMOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.StatisticalOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.StatisticalOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.TangentPlaneOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.TangentPlaneOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.TertiaryDatumDualMCMOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.TertiaryDatumDualMCMOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.TertiaryDatumMCMOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.TertiaryDatumMCMOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.ToleranceMCMOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.ToleranceMCMOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.ZoneShapeOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.ZoneShapeOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.SearchCriteriaSurfaceFinishBuilder.SurfaceFinishTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.SearchCriteriaSurfaceFinishBuilder.SurfaceFinishTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.SearchCriteriaSurfaceFinishBuilder.ToleranceTypeOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.SearchCriteriaSurfaceFinishBuilder.ToleranceTypeOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.SearchModelViewBuilder.PmiTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.SearchModelViewBuilder.PmiTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.SearchModelViewBuilder.SearchScopeOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.SearchModelViewBuilder.SearchScopeOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.SearchModelViewBuilder.TextComparisionOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.SearchModelViewBuilder.TextComparisionOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.SearchModelViewBuilder.ValueComparisionOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.SearchModelViewBuilder.ValueComparisionOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.ShipDimensionBuilder.GroupType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.ShipDimensionBuilder.GroupType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.ShipDraftingFramebarGeneralBuilder.TicDirectionTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.ShipDraftingFramebarGeneralBuilder.TicDirectionTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.SizeLetterCode
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.SizeLetterCode
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.StackAlignmentPosition
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.StackAlignmentPosition
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.StackHorizontalAlignment
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.StackHorizontalAlignment
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.StackVerticalAlignment
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.StackVerticalAlignment
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.SupplementarySymbol
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.SupplementarySymbol
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.SurfaceFinishBuilder.FinishType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.SurfaceFinishBuilder.FinishType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.SurfaceFinishBuilder.StandardType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.SurfaceFinishBuilder.StandardType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.SurfaceFinishStandard
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.SurfaceFinishStandard
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.Symbol
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.Symbol
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.SymbolPreferencesOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.SymbolPreferencesOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.SymbolStyleBuilder.FcfTextUnderlineOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.SymbolStyleBuilder.FcfTextUnderlineOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.SymmetricalCenterlineBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.SymmetricalCenterlineBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.TableCellStyleBuilder.BorderLocationType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.TableCellStyleBuilder.BorderLocationType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.TableCellStyleBuilder.CellFormatTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.TableCellStyleBuilder.CellFormatTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.TableCellStyleBuilder.DateFormatTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.TableCellStyleBuilder.DateFormatTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.TableCellStyleBuilder.FitMethodType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.TableCellStyleBuilder.FitMethodType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.TableCellStyleBuilder.FormatType
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.TableCellStyleBuilder.FormatType
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.TableCellStyleBuilder.TabDirectionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.TableCellStyleBuilder.TabDirectionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.TableCellStyleBuilder.TextAlignmentType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.TableCellStyleBuilder.TextAlignmentType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.TableCellStyleBuilder.TimeFormatTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.TableCellStyleBuilder.TimeFormatTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.TableCellStyleBuilder.ZeroDisplayType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.TableCellStyleBuilder.ZeroDisplayType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.TableSectionStyleBuilder.AlignmentPositionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.TableSectionStyleBuilder.AlignmentPositionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.TableSectionStyleBuilder.ContinuationPropertyType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.TableSectionStyleBuilder.ContinuationPropertyType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.TableSectionStyleBuilder.DisplayContinuationNoteType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.TableSectionStyleBuilder.DisplayContinuationNoteType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.TableSectionStyleBuilder.LocationOfHeader
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.TableSectionStyleBuilder.LocationOfHeader
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.TabularNoteStyleBuilder.ShowLockedDeletedRowMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.TabularNoteStyleBuilder.ShowLockedDeletedRowMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.Tail
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.Tail
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.TargetPointBuilder.Thickness
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.TargetPointBuilder.Thickness
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.TextComponent.TextType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.TextComponent.TextType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.TextJustification
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.TextJustification
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.TextOrientation
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.TextOrientation
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.TextPlacement
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.TextPlacement
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.TextPosition
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.TextPosition
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.TextPreferencesOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.TextPreferencesOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.TextType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.TextType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.TextWithSymbolsBuilder.SymbolPreferencesType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.TextWithSymbolsBuilder.SymbolPreferencesType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.TextWithSymbolsBuilder.SymbolSizingMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.TextWithSymbolsBuilder.SymbolSizingMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.TolerancePlacement
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.TolerancePlacement
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.ToleranceType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.ToleranceType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.TrimDimensionLineStyle
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.TrimDimensionLineStyle
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.TrueLengthTextPosition
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.TrueLengthTextPosition
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.UserSymbolPreferences.SizeType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.UserSymbolPreferences.SizeType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.VerticalTextJustification
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.VerticalTextJustification
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.WeldStandard
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.WeldStandard
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.annotations.ZeroToleranceDisplayStyle
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.annotations.ZeroToleranceDisplayStyle
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.ApparentChainingRuleSelection
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.ApparentChainingRuleSelection
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.ApparentChainingRuleType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.ApparentChainingRuleType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.ASCImporter.Units
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.ASCImporter.Units
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.assemblies.AssembliesChildRevisionOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.assemblies.AssembliesChildRevisionOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.assemblies.AssembliesEventTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.assemblies.AssembliesEventTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.assemblies.AssembliesGeneralPropertiesBuilder.HiddenOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.assemblies.AssembliesGeneralPropertiesBuilder.HiddenOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.assemblies.AssembliesGeneralPropertiesBuilder.LayerOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.assemblies.AssembliesGeneralPropertiesBuilder.LayerOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.assemblies.AssembliesGeneralPropertiesBuilder.QuantityOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.assemblies.AssembliesGeneralPropertiesBuilder.QuantityOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.assemblies.AssembliesGeneralPropertiesBuilder.ReferenceComponentOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.assemblies.AssembliesGeneralPropertiesBuilder.ReferenceComponentOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.assemblies.AssembliesParameterPropertiesBuilder.ArrangementOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.assemblies.AssembliesParameterPropertiesBuilder.ArrangementOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.assemblies.BoxSearchTerm.BoxOverlapLogicType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.assemblies.BoxSearchTerm.BoxOverlapLogicType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.assemblies.ClearanceAnalysisBuilder.CalculationMethodType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.assemblies.ClearanceAnalysisBuilder.CalculationMethodType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.assemblies.ClearanceAnalysisBuilder.ClearanceBetweenEntity
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.assemblies.ClearanceAnalysisBuilder.ClearanceBetweenEntity
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.assemblies.ClearanceAnalysisBuilder.ClearanceZoneSource
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.assemblies.ClearanceAnalysisBuilder.ClearanceZoneSource
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.assemblies.ClearanceAnalysisBuilder.CollectionRange
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.assemblies.ClearanceAnalysisBuilder.CollectionRange
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.assemblies.ClearanceAnalysisBuilder.NumberOfCollections
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.assemblies.ClearanceAnalysisBuilder.NumberOfCollections
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.assemblies.ClearanceAnalysisBuilder.PairExcludedReason
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.assemblies.ClearanceAnalysisBuilder.PairExcludedReason
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.assemblies.ClearanceAnalysisBuilder.ZoneType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.assemblies.ClearanceAnalysisBuilder.ZoneType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.assemblies.ClearanceSet.CopyMode
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.assemblies.ClearanceSet.CopyMode
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.assemblies.ClearanceSet.InterferenceType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.assemblies.ClearanceSet.InterferenceType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.assemblies.ClearanceSet.JobStatus
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.assemblies.ClearanceSet.JobStatus
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.assemblies.ClearanceSet.PenetrationDepthResult
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.assemblies.ClearanceSet.PenetrationDepthResult
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.assemblies.ClearanceSet.ReanalyzeOutOfDateExcludedPairs
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.assemblies.ClearanceSet.ReanalyzeOutOfDateExcludedPairs
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.assemblies.ClearanceSet.ReanalyzePairCalculationMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.assemblies.ClearanceSet.ReanalyzePairCalculationMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.assemblies.CollaborativeContentType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.assemblies.CollaborativeContentType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.assemblies.Component.RepresentationMode
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.assemblies.Component.RepresentationMode
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.assemblies.ComponentAssembly.CheckinCheckoutOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.assemblies.ComponentAssembly.CheckinCheckoutOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.assemblies.ComponentAssembly.CloseModified
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.assemblies.ComponentAssembly.CloseModified
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.assemblies.ComponentAssembly.OpenComponentStatus
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.assemblies.ComponentAssembly.OpenComponentStatus
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.assemblies.ComponentAssembly.OpenOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.assemblies.ComponentAssembly.OpenOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.assemblies.ComponentAssembly.OrderTargetLocation
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.assemblies.ComponentAssembly.OrderTargetLocation
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.assemblies.ComponentAssembly.SubstitutionMode
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.assemblies.ComponentAssembly.SubstitutionMode
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.assemblies.ComponentAssembly.SuppressedState
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.assemblies.ComponentAssembly.SuppressedState
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.assemblies.ComponentQuantity
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.assemblies.ComponentQuantity
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.assemblies.ConstraintDisplayBuilder.VisibleConstraintsRuleOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.assemblies.ConstraintDisplayBuilder.VisibleConstraintsRuleOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.assemblies.CreateNewComponentBuilder.ComponentCamType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.assemblies.CreateNewComponentBuilder.ComponentCamType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.assemblies.CreateNewComponentBuilder.ComponentLayerOptionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.assemblies.CreateNewComponentBuilder.ComponentLayerOptionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.assemblies.CreateNewComponentBuilder.ComponentOriginType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.assemblies.CreateNewComponentBuilder.ComponentOriginType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.assemblies.CreateNewComponentBuilder.ComponentReferenceSetType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.assemblies.CreateNewComponentBuilder.ComponentReferenceSetType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.assemblies.DegreesOfFreedomResult
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.assemblies.DegreesOfFreedomResult
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.assemblies.DegreesOfFreedomStatus
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.assemblies.DegreesOfFreedomStatus
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.assemblies.DesignElementBuilder.EditActionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.assemblies.DesignElementBuilder.EditActionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.assemblies.DesignElementBuilder.LayerOptionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.assemblies.DesignElementBuilder.LayerOptionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.assemblies.DesignElementBuilder.OperationType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.assemblies.DesignElementBuilder.OperationType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.assemblies.DesignElementBuilder.PositioningOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.assemblies.DesignElementBuilder.PositioningOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.assemblies.DesignElementBuilder.ReferenceSetType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.assemblies.DesignElementBuilder.ReferenceSetType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.assemblies.DesignElementBuilder.SaveAsActionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.assemblies.DesignElementBuilder.SaveAsActionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.assemblies.DesignElementBuilder.StateType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.assemblies.DesignElementBuilder.StateType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.assemblies.FindInCollaborativeDesign.ObjectType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.assemblies.FindInCollaborativeDesign.ObjectType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.assemblies.FindInCollaborativeDesign.SearchType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.assemblies.FindInCollaborativeDesign.SearchType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.assemblies.LoadInterpartDataBuilder.OpenUnloadedParentsType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.assemblies.LoadInterpartDataBuilder.OpenUnloadedParentsType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.assemblies.LoadInterpartDataBuilder.SelectionScopeType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.assemblies.LoadInterpartDataBuilder.SelectionScopeType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.assemblies.MakeUniquePartBuilder.Option
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.assemblies.MakeUniquePartBuilder.Option
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.assemblies.Order.State
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.assemblies.Order.State
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.assemblies.Order.Type
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.assemblies.Order.Type
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.assemblies.PlaneSearchTerm.PlaneOverlapLogicType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.assemblies.PlaneSearchTerm.PlaneOverlapLogicType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.assemblies.PositionOverrideType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.assemblies.PositionOverrideType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.assemblies.productinterface.ObjectBuilder.BuilderVersion
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.assemblies.productinterface.ObjectBuilder.BuilderVersion
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.assemblies.productinterface.ObjectBuilder.Mate
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.assemblies.productinterface.ObjectBuilder.Mate
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.assemblies.productinterface.ObjectBuilder.Wave
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.assemblies.productinterface.ObjectBuilder.Wave
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.assemblies.ProductOutlineBuilder.LineFont
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.assemblies.ProductOutlineBuilder.LineFont
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.assemblies.RelinkerBuilder.LinkCategory
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.assemblies.RelinkerBuilder.LinkCategory
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.assemblies.RelinkerBuilder.LinkOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.assemblies.RelinkerBuilder.LinkOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.assemblies.RelinkerBuilder.LinkScope
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.assemblies.RelinkerBuilder.LinkScope
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.assemblies.RelinkerBuilder.LinkType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.assemblies.RelinkerBuilder.LinkType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.assemblies.ReplaceComponentBuilder.ComponentLayerOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.assemblies.ReplaceComponentBuilder.ComponentLayerOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.assemblies.ReplaceComponentBuilder.ComponentNameOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.assemblies.ReplaceComponentBuilder.ComponentNameOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.assemblies.ReplaceComponentBuilder.ComponentReferenceSet
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.assemblies.ReplaceComponentBuilder.ComponentReferenceSet
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.assemblies.SearchTerm.SearchTermLogicType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.assemblies.SearchTerm.SearchTermLogicType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.assemblies.Subset.PartitionViewStyleType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.assemblies.Subset.PartitionViewStyleType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.AttributePropertiesBaseBuilder.BooleanValueOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.AttributePropertiesBaseBuilder.BooleanValueOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.AttributePropertiesBaseBuilder.DataTypeOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.AttributePropertiesBaseBuilder.DataTypeOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.AttributePropertiesBaseBuilder.ObjectOptions
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.AttributePropertiesBaseBuilder.ObjectOptions
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.AttributePropertiesBuilder.OperationType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.AttributePropertiesBuilder.OperationType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.AttributeTemplatesBuilder.AccessKey
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.AttributeTemplatesBuilder.AccessKey
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.AttributeTemplatesBuilder.ConstraintOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.AttributeTemplatesBuilder.ConstraintOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.AttributeTemplatesBuilder.DefaultBooleanOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.AttributeTemplatesBuilder.DefaultBooleanOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.AttributeTemplatesBuilder.TemplatesOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.AttributeTemplatesBuilder.TemplatesOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.AutomaticTraceline.ModeOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.AutomaticTraceline.ModeOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.AxisOrientation
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.AxisOrientation
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.BasePart.BookmarkOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.BasePart.BookmarkOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.BasePart.CloseAfterSave
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.BasePart.CloseAfterSave
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.BasePart.CloseModified
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.BasePart.CloseModified
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.BasePart.CloseWholeTree
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.BasePart.CloseWholeTree
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.BasePart.CollaborativeContentType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.BasePart.CollaborativeContentType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.BasePart.PartPreview
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.BasePart.PartPreview
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.BasePart.SaveComponents
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.BasePart.SaveComponents
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.BasePart.Units
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.BasePart.Units
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.blockstyler.BlockDialog.DialogMode
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.blockstyler.BlockDialog.DialogMode
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.blockstyler.PropertyList.ListMode
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.blockstyler.PropertyList.ListMode
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.blockstyler.PropertyList.PropertyType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.blockstyler.PropertyList.PropertyType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.blockstyler.SelectObject.FilterType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.blockstyler.SelectObject.FilterType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.blockstyler.SetList.InsertionLocation
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.blockstyler.SetList.InsertionLocation
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.blockstyler.Tree.BeginLabelEditState
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.blockstyler.Tree.BeginLabelEditState
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.blockstyler.Tree.ColumnDisplay
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.blockstyler.Tree.ColumnDisplay
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.blockstyler.Tree.ColumnResizePolicy
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.blockstyler.Tree.ColumnResizePolicy
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.blockstyler.Tree.ColumnSortOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.blockstyler.Tree.ColumnSortOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.blockstyler.Tree.ControlType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.blockstyler.Tree.ControlType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.blockstyler.Tree.EditControlOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.blockstyler.Tree.EditControlOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.blockstyler.Tree.EndLabelEditState
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.blockstyler.Tree.EndLabelEditState
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.blockstyler.Tree.NodeInsertOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.blockstyler.Tree.NodeInsertOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.blockstyler.Wizard.SubNodeAction
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.blockstyler.Wizard.SubNodeAction
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.blockstyler.Wizard.TaskNavigatorItem
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.blockstyler.Wizard.TaskNavigatorItem
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.bodydes.OnestepUnformBuilder.Constraint
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.bodydes.OnestepUnformBuilder.Constraint
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.bodydes.OnestepUnformBuilder.Convergency
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.bodydes.OnestepUnformBuilder.Convergency
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.bodydes.OnestepUnformBuilder.DisplaySpringbackMode
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.bodydes.OnestepUnformBuilder.DisplaySpringbackMode
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.bodydes.OnestepUnformBuilder.MeshElement
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.bodydes.OnestepUnformBuilder.MeshElement
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.bodydes.OnestepUnformBuilder.Object
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.bodydes.OnestepUnformBuilder.Object
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.bodydes.OnestepUnformBuilder.Part
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.bodydes.OnestepUnformBuilder.Part
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.bodydes.OnestepUnformBuilder.Process
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.bodydes.OnestepUnformBuilder.Process
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.bodydes.OnestepUnformBuilder.Surface
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.bodydes.OnestepUnformBuilder.Surface
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.bodydes.OnestepUnformBuilder.UnfoldMode
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.bodydes.OnestepUnformBuilder.UnfoldMode
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.AfuData.AbscissaType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.AfuData.AbscissaType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.AfuData.OrdinateType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.AfuData.OrdinateType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.AfuDataConvertor.Fft
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.AfuDataConvertor.Fft
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.AfuManager.WritingFileMode
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.AfuManager.WritingFileMode
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.AfuMathOperation.InterpolationMode
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.AfuMathOperation.InterpolationMode
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.AfuMathOperation.MultiType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.AfuMathOperation.MultiType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.AfuMathOperation.OuterInterpolation
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.AfuMathOperation.OuterInterpolation
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.AfuMathOperation.OutputType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.AfuMathOperation.OutputType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.AfuMathOperation.Overall
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.AfuMathOperation.Overall
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.AfuMathOperation.SrsToTimeOctave
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.AfuMathOperation.SrsToTimeOctave
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.AfuMathOperation.SrsToTimeOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.AfuMathOperation.SrsToTimeOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.AfuMathOperation.SrsToTimeStrategy
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.AfuMathOperation.SrsToTimeStrategy
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.AfuMathOperation.TimeToSrsAxisType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.AfuMathOperation.TimeToSrsAxisType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.AfuMathOperation.TimeToSrsResponseType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.AfuMathOperation.TimeToSrsResponseType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.AssignNodalCSBuilder.Cs
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.AssignNodalCSBuilder.Cs
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.AssignNodalCSBuilder.CSType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.AssignNodalCSBuilder.CSType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.AssignNodalCSBuilder.GeometryOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.AssignNodalCSBuilder.GeometryOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.AssyFEModel.MappedComponentRemovalType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.AssyFEModel.MappedComponentRemovalType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.AssyFEModel.RepositionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.AssyFEModel.RepositionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.AutomaticMorphBuilder.OrphanNodeMovementType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.AutomaticMorphBuilder.OrphanNodeMovementType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.BaseFemPart.AxisymAbstractionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.BaseFemPart.AxisymAbstractionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.BaseIteration.IterationType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.BaseIteration.IterationType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.BaseIteration.IterationValueType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.BaseIteration.IterationValueType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.BeamEADBuilder.EndReleaseSetting
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.BeamEADBuilder.EndReleaseSetting
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.BeamEADBuilder.OrientationMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.BeamEADBuilder.OrientationMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.BeamEADBuilder.State
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.BeamEADBuilder.State
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.BeamEADBuilder.VectorChoiceType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.BeamEADBuilder.VectorChoiceType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.BeamSection.DirectionOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.BeamSection.DirectionOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.BeamSectionOffsetOptions.Method
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.BeamSectionOffsetOptions.Method
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.BeamSectionOrientationOptions.Method
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.BeamSectionOrientationOptions.Method
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.BoltBuilder.BoltOperation
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.BoltBuilder.BoltOperation
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.BoltBuilder.Selection
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.BoltBuilder.Selection
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.BoltBuilder.SpiderDiameter
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.BoltBuilder.SpiderDiameter
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.BushingEADBuilder.OrientationMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.BushingEADBuilder.OrientationMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.BushingEADBuilder.State
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.BushingEADBuilder.State
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.CaeSetGroupFilterType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.CaeSetGroupFilterType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.CaeSetObjectSubType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.CaeSetObjectSubType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.CfdContactPreventionConstraintBuilder.LocalSubdivisions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.CfdContactPreventionConstraintBuilder.LocalSubdivisions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.CfdContactPreventionConstraintBuilder.Priority
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.CfdContactPreventionConstraintBuilder.Priority
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.CfdContactPreventionConstraintBuilder.Sizing
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.CfdContactPreventionConstraintBuilder.Sizing
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.CfdLocalResolutionConstraintBuilder.LocalSubdivisions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.CfdLocalResolutionConstraintBuilder.LocalSubdivisions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.CfdLocalResolutionConstraintBuilder.Priority
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.CfdLocalResolutionConstraintBuilder.Priority
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.CfdLocalResolutionConstraintBuilder.ResolutionDensity
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.CfdLocalResolutionConstraintBuilder.ResolutionDensity
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.CfdLocalResolutionConstraintBuilder.Sizing
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.CfdLocalResolutionConstraintBuilder.Sizing
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.CircularImprintBuilder.AroundEdgeDiaType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.CircularImprintBuilder.AroundEdgeDiaType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.CompanionResultBuilder.CompanionResultDisposition
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.CompanionResultBuilder.CompanionResultDisposition
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.CompanionResultBuilder.ResultAppendMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.CompanionResultBuilder.ResultAppendMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ConflictResolutionBuilder.Rule
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ConflictResolutionBuilder.Rule
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ConstraintResolutionBuilder.Rule
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ConstraintResolutionBuilder.Rule
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ContactMeshBuilder.AlignmentType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ContactMeshBuilder.AlignmentType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.CorrelAlignmentBuilder.ScalingChoice
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.CorrelAlignmentBuilder.ScalingChoice
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.CorrelFineTuneAlignmentBuilder.AngleVector
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.CorrelFineTuneAlignmentBuilder.AngleVector
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.CorrelFineTuneAlignmentBuilder.DistanceVector
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.CorrelFineTuneAlignmentBuilder.DistanceVector
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.CorrelModePairingBuilder.Auto
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.CorrelModePairingBuilder.Auto
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.CorrelShapemetrictype
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.CorrelShapemetrictype
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.CorrelSolutionBuilder.EnumDampingFrftype
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.CorrelSolutionBuilder.EnumDampingFrftype
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.CreateJtBuilder.Component
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.CreateJtBuilder.Component
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.DependentMeshBuilder.MeshType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.DependentMeshBuilder.MeshType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.DisplaySectionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.DisplaySectionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.DurabilityDamageEvaluationBuilder.BwiWeldClassEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.DurabilityDamageEvaluationBuilder.BwiWeldClassEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.DurabilityDamageEvaluationBuilder.CyclicStressStrainModelEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.DurabilityDamageEvaluationBuilder.CyclicStressStrainModelEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.DurabilityDamageEvaluationBuilder.EquivalentStressMethodEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.DurabilityDamageEvaluationBuilder.EquivalentStressMethodEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.DurabilityDamageEvaluationBuilder.FatigueLifeCriterionEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.DurabilityDamageEvaluationBuilder.FatigueLifeCriterionEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.DurabilityDamageEvaluationBuilder.ProbabilityOptionEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.DurabilityDamageEvaluationBuilder.ProbabilityOptionEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.DurabilityDataControlBuilder.TimeExtentsEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.DurabilityDataControlBuilder.TimeExtentsEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.DurabilityEvaluateFatigueHistoryBuilder.FatigueHistoryDataTypeEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.DurabilityEvaluateFatigueHistoryBuilder.FatigueHistoryDataTypeEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.DurabilityEventFatigueSettingsBuilder.BwiWeldClassEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.DurabilityEventFatigueSettingsBuilder.BwiWeldClassEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.DurabilityEventFatigueSettingsBuilder.CyclicStressStrainModelEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.DurabilityEventFatigueSettingsBuilder.CyclicStressStrainModelEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.DurabilityEventFatigueSettingsBuilder.EquivalentStressMethodEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.DurabilityEventFatigueSettingsBuilder.EquivalentStressMethodEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.DurabilityEventFatigueSettingsBuilder.FatigueLifeCriterionEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.DurabilityEventFatigueSettingsBuilder.FatigueLifeCriterionEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.DurabilityEventFatigueSettingsBuilder.FatigueSafetyFactorMethodEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.DurabilityEventFatigueSettingsBuilder.FatigueSafetyFactorMethodEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.DurabilityEventFatigueSettingsBuilder.FatigueSafetyFactorOutputEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.DurabilityEventFatigueSettingsBuilder.FatigueSafetyFactorOutputEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.DurabilityEventFatigueSettingsBuilder.MaximumAlternatingStressEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.DurabilityEventFatigueSettingsBuilder.MaximumAlternatingStressEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.DurabilityEventFatigueSettingsBuilder.OrthotropicFatigueCriterionEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.DurabilityEventFatigueSettingsBuilder.OrthotropicFatigueCriterionEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.DurabilityEventFatigueSettingsBuilder.OrthotropicMeanStressEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.DurabilityEventFatigueSettingsBuilder.OrthotropicMeanStressEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.DurabilityEventFatigueSettingsBuilder.ProbabilityOptionEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.DurabilityEventFatigueSettingsBuilder.ProbabilityOptionEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.DurabilityEventOverridesBuilder.UseElementsEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.DurabilityEventOverridesBuilder.UseElementsEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.DurabilityEventSolverBuilder.SubmitOptionsEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.DurabilityEventSolverBuilder.SubmitOptionsEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.DurabilityEventStrengthSettingsBuilder.OrthotropicFailureCriterionEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.DurabilityEventStrengthSettingsBuilder.OrthotropicFailureCriterionEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.DurabilityEventStrengthSettingsBuilder.StressCriterionEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.DurabilityEventStrengthSettingsBuilder.StressCriterionEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.DurabilityEventStrengthSettingsBuilder.StressTypeEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.DurabilityEventStrengthSettingsBuilder.StressTypeEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.DurabilityLoadPatternBuilder.PatternTypeEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.DurabilityLoadPatternBuilder.PatternTypeEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.DurabilityRandomFatigueBuilder.RandomFatigueMethodEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.DurabilityRandomFatigueBuilder.RandomFatigueMethodEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.DurabilitySolverBuilder.ActiveEventSolveOptionsEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.DurabilitySolverBuilder.ActiveEventSolveOptionsEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.DurabilitySolverBuilder.SubmitOptionsEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.DurabilitySolverBuilder.SubmitOptionsEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.DurabilityStaticEventBuilder.ExcitationTypeEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.DurabilityStaticEventBuilder.ExcitationTypeEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.DurabilityStrainGageAnalyzerBuilder.AxisDirectionSearchMethodEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.DurabilityStrainGageAnalyzerBuilder.AxisDirectionSearchMethodEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.DurabilityStrainGageAnalyzerBuilder.CriticalPlaneOptionEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.DurabilityStrainGageAnalyzerBuilder.CriticalPlaneOptionEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.DurabilityStrainGageAnalyzerBuilder.GageConstructionEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.DurabilityStrainGageAnalyzerBuilder.GageConstructionEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.DurabilityStrainGageAnalyzerBuilder.GageSourceEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.DurabilityStrainGageAnalyzerBuilder.GageSourceEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.DurabilityStrainGageAnalyzerBuilder.GageTypeEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.DurabilityStrainGageAnalyzerBuilder.GageTypeEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.DurabilityStressAxesBuilder.BeamStressEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.DurabilityStressAxesBuilder.BeamStressEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.DurabilityStressAxesBuilder.ElementFaceStressAxisEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.DurabilityStressAxesBuilder.ElementFaceStressAxisEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.DurabilityStressAxesBuilder.NodeElementOptionEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.DurabilityStressAxesBuilder.NodeElementOptionEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.DurabilityStressAxesBuilder.ShellRegionEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.DurabilityStressAxesBuilder.ShellRegionEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.DurabilityStressAxesBuilder.StressAxisDirectionSearchMethodEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.DurabilityStressAxesBuilder.StressAxisDirectionSearchMethodEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.DurabilityStressAxesBuilder.StressAxisMethodEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.DurabilityStressAxesBuilder.StressAxisMethodEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.EdgeSticherBuilder.StitchMethods
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.EdgeSticherBuilder.StitchMethods
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.EdgeSticherBuilder.StitchOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.EdgeSticherBuilder.StitchOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.EdgeSticherBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.EdgeSticherBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ElementConnectivityBuilder.Methods
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ElementConnectivityBuilder.Methods
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ElementConnectivityBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ElementConnectivityBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ElementCreateBuilder.ElemDimType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ElementCreateBuilder.ElemDimType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ElementCreateBuilder.NewMeshType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ElementCreateBuilder.NewMeshType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ElementExtrudeBuilder.DistanceType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ElementExtrudeBuilder.DistanceType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ElementExtrudeBuilder.ElemDimType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ElementExtrudeBuilder.ElemDimType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ElementExtrudeBuilder.MethodType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ElementExtrudeBuilder.MethodType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ElementExtrudeBuilder.NewMeshType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ElementExtrudeBuilder.NewMeshType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ElementModifyLabelBuilder.LabelType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ElementModifyLabelBuilder.LabelType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ElementModifyOrderBuilder.Midnode
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ElementModifyOrderBuilder.Midnode
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ElementModifyOrderBuilder.Operation
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ElementModifyOrderBuilder.Operation
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ElementNormalsType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ElementNormalsType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ElementProjectBuilder.ElementDimensionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ElementProjectBuilder.ElementDimensionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ElementProjectBuilder.LabelType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ElementProjectBuilder.LabelType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ElementProjectBuilder.MethodType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ElementProjectBuilder.MethodType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ElementProjectBuilder.NewMeshType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ElementProjectBuilder.NewMeshType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ElementReflectBuilder.ElemDimType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ElementReflectBuilder.ElemDimType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ElementReflectBuilder.LabelType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ElementReflectBuilder.LabelType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ElementReflectBuilder.NewMeshType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ElementReflectBuilder.NewMeshType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ElementRevolveBuilder.AngleType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ElementRevolveBuilder.AngleType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ElementRevolveBuilder.ElemDimType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ElementRevolveBuilder.ElemDimType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ElementRevolveBuilder.NewMeshType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ElementRevolveBuilder.NewMeshType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ElementSplitBuilder.SplitMethodType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ElementSplitBuilder.SplitMethodType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ElementSplitBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ElementSplitBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ElementTranslateBuilder.DistanceType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ElementTranslateBuilder.DistanceType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ElementTranslateBuilder.ElemDimensionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ElementTranslateBuilder.ElemDimensionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ElementTranslateBuilder.LabelType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ElementTranslateBuilder.LabelType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ElementTranslateBuilder.MethodType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ElementTranslateBuilder.MethodType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ElementTranslateBuilder.NewMeshType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ElementTranslateBuilder.NewMeshType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ElementTypeBuilder.ElementOrderType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ElementTypeBuilder.ElementOrderType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ElementTypeBuilder.ElementType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ElementTypeBuilder.ElementType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ElementTypes.Order
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ElementTypes.Order
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ElementTypes.Shape
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ElementTypes.Shape
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.FEModelOccAttribute.AltRepDisplayStyle
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.FEModelOccAttribute.AltRepDisplayStyle
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.FEModelOccAttribute.RepType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.FEModelOccAttribute.RepType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.FemPart.UseBodiesOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.FemPart.UseBodiesOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.FluidDomainBuilder.IntExtType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.FluidDomainBuilder.IntExtType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.FreeBodyResultsBuilder.LocationMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.FreeBodyResultsBuilder.LocationMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.FreeBodyResultsBuilder.OutputUnits
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.FreeBodyResultsBuilder.OutputUnits
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.FreeBodyResultsBuilder.VectorDisplay
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.FreeBodyResultsBuilder.VectorDisplay
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ftk.DataManager.AfuRecordZValue
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ftk.DataManager.AfuRecordZValue
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.Function.InterpolationMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.Function.InterpolationMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.Function.Type
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.Function.Type
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.GapEADBuilder.OrientationMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.GapEADBuilder.OrientationMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.GapEADBuilder.State
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.GapEADBuilder.State
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.GroupElemMethodElemOption.ElemOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.GroupElemMethodElemOption.ElemOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.Laminate.ZoneType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.Laminate.ZoneType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.LaminateDrapingDataBuilder.DrapingDirectionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.LaminateDrapingDataBuilder.DrapingDirectionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.LaminateDrapingDataBuilder.DrapingPathType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.LaminateDrapingDataBuilder.DrapingPathType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.LaminateDrapingDataBuilder.SecondaryVectorType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.LaminateDrapingDataBuilder.SecondaryVectorType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.LaminateDrapingDataBuilder.SolverType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.LaminateDrapingDataBuilder.SolverType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.LaminateDynamicEventBuilder.ExcitationSelectedAxisEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.LaminateDynamicEventBuilder.ExcitationSelectedAxisEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.LaminateDynamicEventBuilder.ReferenceTypeEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.LaminateDynamicEventBuilder.ReferenceTypeEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.LaminateGlobalLayup.StackingRecipeType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.LaminateGlobalLayup.StackingRecipeType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.LaminateImportedLayupBuilder.ApiTypeEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.LaminateImportedLayupBuilder.ApiTypeEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.LaminateImportedLayupBuilder.FileEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.LaminateImportedLayupBuilder.FileEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.LaminateImportedLayupBuilder.ImportMethodEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.LaminateImportedLayupBuilder.ImportMethodEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.LaminatePly.InterLaminarFailureTheoryType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.LaminatePly.InterLaminarFailureTheoryType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.LaminatePly.PlyFailureTheoryType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.LaminatePly.PlyFailureTheoryType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.LaminatePly.SolidPropertyType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.LaminatePly.SolidPropertyType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.LaminateRandomEventBuilder.ConfidenceLevelOptionEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.LaminateRandomEventBuilder.ConfidenceLevelOptionEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.LaminateRandomEventBuilder.ExcitationAxisEnum
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.LaminateRandomEventBuilder.ExcitationAxisEnum
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.LaminateRandomEventBuilder.ReferenceEnum
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.LaminateRandomEventBuilder.ReferenceEnum
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.LaminateRelabelPliesBuilder.RelabelOptionEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.LaminateRelabelPliesBuilder.RelabelOptionEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.LaminateSineEventBuilder.AdditionalFrequeciesUnitsEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.LaminateSineEventBuilder.AdditionalFrequeciesUnitsEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.LaminateSineEventBuilder.IntermediateFrequeciesBetweenEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.LaminateSineEventBuilder.IntermediateFrequeciesBetweenEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.LaminateSineEventBuilder.IntermediateFrequeciesEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.LaminateSineEventBuilder.IntermediateFrequeciesEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.LaminateSineEventBuilder.NaturalFrequeciesEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.LaminateSineEventBuilder.NaturalFrequeciesEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.LaminateViewDrapingResultsBuilder.OuputChoice
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.LaminateViewDrapingResultsBuilder.OuputChoice
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.LbcAssociationMgr.BcType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.LbcAssociationMgr.BcType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.LocalRemeshBuilder.Option
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.LocalRemeshBuilder.Option
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.LumpedMassEADBuilder.State
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.LumpedMassEADBuilder.State
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ManualMorphBuilder.MapMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ManualMorphBuilder.MapMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ManualMorphBuilder.MapType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ManualMorphBuilder.MapType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.MappedMeshBuilder.MidNodeType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.MappedMeshBuilder.MidNodeType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.MarkerType0d
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.MarkerType0d
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.MechanicalLoadSumBuilder.UserUnit
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.MechanicalLoadSumBuilder.UserUnit
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.Mesh2dBuilder.GeometryType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.Mesh2dBuilder.GeometryType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.Mesh3dHexBuilder.Type
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.Mesh3dHexBuilder.Type
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.MeshCollectorBuilder.ElementDimensionOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.MeshCollectorBuilder.ElementDimensionOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.MeshControlBuilder.CylinderAxialElementSizeType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.MeshControlBuilder.CylinderAxialElementSizeType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.MeshControlBuilder.CylinderCircularSizeType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.MeshControlBuilder.CylinderCircularSizeType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.MeshControlBuilder.FilletAxialElementSizeType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.MeshControlBuilder.FilletAxialElementSizeType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.MeshControlBuilder.FilletCircumferenceSizeType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.MeshControlBuilder.FilletCircumferenceSizeType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.MeshControlBuilder.FilletType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.MeshControlBuilder.FilletType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.MeshControlBuilder.HeightDefinedByOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.MeshControlBuilder.HeightDefinedByOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.MeshControlBuilder.ProgressionTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.MeshControlBuilder.ProgressionTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.MeshControlBuilder.SizeTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.MeshControlBuilder.SizeTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.MeshControlBuilder.SizingType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.MeshControlBuilder.SizingType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.MeshControlBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.MeshControlBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.MeshControlBuilder.WeldSide
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.MeshControlBuilder.WeldSide
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.MeshFromBoundaryBuilder.LoopOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.MeshFromBoundaryBuilder.LoopOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.MeshFromBoundaryBuilder.RailOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.MeshFromBoundaryBuilder.RailOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.MeshPointMultipleOnCurveBuilder.PlacementType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.MeshPointMultipleOnCurveBuilder.PlacementType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.MMCCreateBuilder.FaceSearchType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.MMCCreateBuilder.FaceSearchType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.MMCCreateBuilder.MeshMatingType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.MMCCreateBuilder.MeshMatingType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.MMCCreateBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.MMCCreateBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.modelcheck.AlignShellElementNormalBuilder.ConnectedElementScope
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.modelcheck.AlignShellElementNormalBuilder.ConnectedElementScope
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.modelcheck.DuplicateElementsCheckBuilder.DeletePreference
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.modelcheck.DuplicateElementsCheckBuilder.DeletePreference
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.modelcheck.DuplicateNodesCheckBuilder.ListOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.modelcheck.DuplicateNodesCheckBuilder.ListOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.modelcheck.DuplicateNodesCheckBuilder.MergePreference
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.modelcheck.DuplicateNodesCheckBuilder.MergePreference
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.modelcheck.ElementEdgeCheckBuilder.Scope
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.modelcheck.ElementEdgeCheckBuilder.Scope
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.modelcheck.ElementMaterialOrientationCheckBuilder.MaterialOrientationType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.modelcheck.ElementMaterialOrientationCheckBuilder.MaterialOrientationType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.modelcheck.ElementQualityCheckBuilder.OutputElements
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.modelcheck.ElementQualityCheckBuilder.OutputElements
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.modelcheck.ElementQualityCheckBuilder.ReportFormat
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.modelcheck.ElementQualityCheckBuilder.ReportFormat
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.modelcheck.ElementQualitySetting.LimitValue
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.modelcheck.ElementQualitySetting.LimitValue
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.modelcheck.TestValueTypes.CriteriaType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.modelcheck.TestValueTypes.CriteriaType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.modelcheck.TestValueTypes.Result
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.modelcheck.TestValueTypes.Result
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.modelcheck.TestValueTypes.TestType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.modelcheck.TestValueTypes.TestType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.modelcheck.TestValueTypes.Validator
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.modelcheck.TestValueTypes.Validator
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ModelDisplayBuilder.ElemQualPass
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ModelDisplayBuilder.ElemQualPass
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ModelDisplayBuilder.ElmClrBasis
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ModelDisplayBuilder.ElmClrBasis
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ModelDisplayBuilder.ElmDispQuality
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ModelDisplayBuilder.ElmDispQuality
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ModelDisplayBuilder.FreeEdgeFont
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ModelDisplayBuilder.FreeEdgeFont
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ModelDisplayBuilder.FreeEdgeMarker
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ModelDisplayBuilder.FreeEdgeMarker
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ModelDisplayBuilder.FreeEdgeWidth
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ModelDisplayBuilder.FreeEdgeWidth
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ModelDisplayBuilder.NodeDisplayModeType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ModelDisplayBuilder.NodeDisplayModeType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ModelDisplayBuilder.NodeMarkerType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ModelDisplayBuilder.NodeMarkerType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ModelDisplayBuilder.NodeMeshShowHideOptionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ModelDisplayBuilder.NodeMeshShowHideOptionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ModelDisplayBuilder.NodeUnattachedMarkerType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ModelDisplayBuilder.NodeUnattachedMarkerType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ModelDisplayBuilder.StitchedEdgeFont
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ModelDisplayBuilder.StitchedEdgeFont
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ModelDisplayBuilder.StitchedEdgeMarker
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ModelDisplayBuilder.StitchedEdgeMarker
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ModelDisplayBuilder.StitchedEdgeWidth
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ModelDisplayBuilder.StitchedEdgeWidth
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ModelUpdateCorrelMethodBuilder.Method
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ModelUpdateCorrelMethodBuilder.Method
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ModelUpdateDesignVariablesRapidCreateBuilder.DesignVariableTypeEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ModelUpdateDesignVariablesRapidCreateBuilder.DesignVariableTypeEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ModelUpdateDesignVariablesRapidCreateBuilder.MaterialTypesEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ModelUpdateDesignVariablesRapidCreateBuilder.MaterialTypesEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ModelUpdateDesignVariablesRapidCreateBuilder.PhysicalTypesEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ModelUpdateDesignVariablesRapidCreateBuilder.PhysicalTypesEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ModelUpdateOptimOptionsBuilder.MethodChoice
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ModelUpdateOptimOptionsBuilder.MethodChoice
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ModelUpdateOptimOptionsBuilder.SteepestDescMethodChoice
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ModelUpdateOptimOptionsBuilder.SteepestDescMethodChoice
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ModelUpdateSolution.TargetType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ModelUpdateSolution.TargetType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.NodeElementInfoBuilder.EntityType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.NodeElementInfoBuilder.EntityType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.NodeElementInfoBuilder.FormatType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.NodeElementInfoBuilder.FormatType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.NodeElementInfoBuilder.PropertyType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.NodeElementInfoBuilder.PropertyType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.NodeModifyLabelBuilder.LabelType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.NodeModifyLabelBuilder.LabelType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.NodeProjectBuilder.LabelType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.NodeProjectBuilder.LabelType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.NodeProjectBuilder.NodeProjectTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.NodeProjectBuilder.NodeProjectTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.NodeProjectBuilder.ProjectionMethodType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.NodeProjectBuilder.ProjectionMethodType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.NodeReflectBuilder.CopyType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.NodeReflectBuilder.CopyType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.NodeReflectBuilder.LabelType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.NodeReflectBuilder.LabelType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.NodeRotateBuilder.CopyType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.NodeRotateBuilder.CopyType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.NodeRotateBuilder.DistanceType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.NodeRotateBuilder.DistanceType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.NodeRotateBuilder.LabelType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.NodeRotateBuilder.LabelType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.NodesBetweenNodesBuilder.TypeEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.NodesBetweenNodesBuilder.TypeEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.NodesOnCurveBuilder.PlacementType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.NodesOnCurveBuilder.PlacementType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.NodeTranslateBuilder.CopyType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.NodeTranslateBuilder.CopyType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.NodeTranslateBuilder.DistanceType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.NodeTranslateBuilder.DistanceType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.NodeTranslateBuilder.LabelType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.NodeTranslateBuilder.LabelType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.NodeTranslateBuilder.MethodType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.NodeTranslateBuilder.MethodType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.OneDimensionalElementSplitBuilder.SplitMethodType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.OneDimensionalElementSplitBuilder.SplitMethodType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.optimization.Category
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.optimization.Category
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.optimization.DAODesignVariableBuilder.Variable
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.optimization.DAODesignVariableBuilder.Variable
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.optimization.Geometry
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.optimization.Geometry
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.optimization.Goal
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.optimization.Goal
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.optimization.Hookes
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.optimization.Hookes
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.optimization.Limit
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.optimization.Limit
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.optimization.Response
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.optimization.Response
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.optimization.Solver
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.optimization.Solver
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.optimization.TBSBaseDesignVariableBuilder.GroupOperator
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.optimization.TBSBaseDesignVariableBuilder.GroupOperator
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.optimization.TBSCastCondition.MiddlePlaneType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.optimization.TBSCastCondition.MiddlePlaneType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.optimization.TBSCheckDOF.CheckDofOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.optimization.TBSCheckDOF.CheckDofOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.optimization.TBSConstraintBuilder.ConstraintOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.optimization.TBSConstraintBuilder.ConstraintOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.optimization.TBSConstraintBuilder.MagnitudeType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.optimization.TBSConstraintBuilder.MagnitudeType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.optimization.TBSGroupDefinition.DefinitionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.optimization.TBSGroupDefinition.DefinitionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.optimization.TBSGroupDefinition.GroupElementType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.optimization.TBSGroupDefinition.GroupElementType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.optimization.TBSLoadCase.LayerOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.optimization.TBSLoadCase.LayerOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.optimization.TBSLoadCaseManager.SelectionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.optimization.TBSLoadCaseManager.SelectionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.optimization.TBSMeshSmooth.Strategy
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.optimization.TBSMeshSmooth.Strategy
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.optimization.TBSObjectives.ObjectiveType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.optimization.TBSObjectives.ObjectiveType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.optimization.TBSOptimizationSolution.ResultStatus
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.optimization.TBSOptimizationSolution.ResultStatus
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.optimization.TBSOptimizationSolutionBuilder.StrategyType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.optimization.TBSOptimizationSolutionBuilder.StrategyType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.optimization.TBSOutputControlOptions.Op2Option
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.optimization.TBSOutputControlOptions.Op2Option
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.optimization.TBSShapeLinkCondition.ManufacturingOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.optimization.TBSShapeLinkCondition.ManufacturingOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.optimization.TBSShapeOptimizationParameters.DisplacementStepsize
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.optimization.TBSShapeOptimizationParameters.DisplacementStepsize
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.optimization.TBSSmoothBuilder.Format
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.optimization.TBSSmoothBuilder.Format
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.optimization.TBSSmoothBuilder.IsoType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.optimization.TBSSmoothBuilder.IsoType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.optimization.TBSSmoothBuilder.OriginalSurfaceSmoothingOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.optimization.TBSSmoothBuilder.OriginalSurfaceSmoothingOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.optimization.TBSSmoothBuilder.ResultFiltering
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.optimization.TBSSmoothBuilder.ResultFiltering
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.optimization.TBSSmoothBuilder.SelfIntersectionCheckingOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.optimization.TBSSmoothBuilder.SelfIntersectionCheckingOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.optimization.TBSSmoothBuilder.SliceFormatOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.optimization.TBSSmoothBuilder.SliceFormatOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.optimization.TBSTestFunction.Direction
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.optimization.TBSTestFunction.Direction
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.optimization.TBSTopologyControllerOptimizationParameters.AutoFrozen
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.optimization.TBSTopologyControllerOptimizationParameters.AutoFrozen
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.optimization.TBSTopologyControllerOptimizationParameters.Speed
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.optimization.TBSTopologyControllerOptimizationParameters.Speed
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.optimization.TBSTopologyControllerOptimizationParameters.VolumeDefinitionMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.optimization.TBSTopologyControllerOptimizationParameters.VolumeDefinitionMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.optimization.TBSTopologyLinkCondition.AxisType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.optimization.TBSTopologyLinkCondition.AxisType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.optimization.TBSTopologyLinkCondition.SymmetryOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.optimization.TBSTopologyLinkCondition.SymmetryOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.optimization.TBSTopologyRestrictAreaBuilder.CheckTypeOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.optimization.TBSTopologyRestrictAreaBuilder.CheckTypeOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.optimization.TBSTopologySensitivityOptimizationParameters.DensityUpdate
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.optimization.TBSTopologySensitivityOptimizationParameters.DensityUpdate
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.optimization.TBSTopologySensitivityOptimizationParameters.MaterialInterpolation
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.optimization.TBSTopologySensitivityOptimizationParameters.MaterialInterpolation
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.PolygonFaceOnMeshBuilder.PolygonFaceOnMeshType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.PolygonFaceOnMeshBuilder.PolygonFaceOnMeshType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.PolygonFaceOnMeshBuilder.SelectBodyMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.PolygonFaceOnMeshBuilder.SelectBodyMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.Post.Abcissa
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.Post.Abcissa
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.Post.AnimationControl
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.Post.AnimationControl
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.Post.AnimationIterationTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.Post.AnimationIterationTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.Post.AnimationStyle
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.Post.AnimationStyle
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.Post.AnimationType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.Post.AnimationType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.Post.AxisymetricAxis
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.Post.AxisymetricAxis
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.Post.ClipPlane
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.Post.ClipPlane
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.Post.ClipSide
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.Post.ClipSide
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.Post.EdgeStyle
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.Post.EdgeStyle
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.Post.Export
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.Post.Export
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.Post.FaceStyle
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.Post.FaceStyle
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.Post.Format
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.Post.Format
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.Post.GroupVisibility
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.Post.GroupVisibility
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.Post.IntegrationScheme
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.Post.IntegrationScheme
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.Post.Legend
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.Post.Legend
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.Post.LimitDisplay
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.Post.LimitDisplay
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.Post.MarkColor
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.Post.MarkColor
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.Post.Marker
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.Post.Marker
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.Post.MarkHide
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.Post.MarkHide
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.Post.MarkLocation
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.Post.MarkLocation
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.Post.MarkMaximumSize
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.Post.MarkMaximumSize
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.Post.MarkRenderStyle
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.Post.MarkRenderStyle
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.Post.MarkSize
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.Post.MarkSize
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.Post.MarkTensorStyle
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.Post.MarkTensorStyle
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.Post.NoDataTreatment
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.Post.NoDataTreatment
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.Post.NodeValueSharingCriterion
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.Post.NodeValueSharingCriterion
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.Post.Position
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.Post.Position
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.Post.Scale
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.Post.Scale
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.Post.ShowHeader
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.Post.ShowHeader
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.Post.Spectrum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.Post.Spectrum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.Post.StreamlineColor
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.Post.StreamlineColor
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.Post.StreamlineDirection
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.Post.StreamlineDirection
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.Post.StreamlineLineWeight
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.Post.StreamlineLineWeight
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.Post.StreamlineSize
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.Post.StreamlineSize
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.Post.StreamlineStyle
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.Post.StreamlineStyle
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.Post.StreamlineSynchronization
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.Post.StreamlineSynchronization
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.Post.Style
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.Post.Style
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.Post.Target
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.Post.Target
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.Post.Threshold
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.Post.Threshold
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.Post.ValueSharingCriterion
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.Post.ValueSharingCriterion
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.PostGraphAcrossIterationsBuilder.CombinationMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.PostGraphAcrossIterationsBuilder.CombinationMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.PostGraphAcrossIterationsBuilder.IterationLabelingOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.PostGraphAcrossIterationsBuilder.IterationLabelingOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.PostGraphAlongPathBuilder.CoordinateSysAxis
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.PostGraphAlongPathBuilder.CoordinateSysAxis
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.PostGraphAlongPathBuilder.CsysType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.PostGraphAlongPathBuilder.CsysType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.PostGraphAlongPathBuilder.Xaxis
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.PostGraphAlongPathBuilder.Xaxis
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.PostGraphBuilder.DataErrorHandling
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.PostGraphBuilder.DataErrorHandling
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.PostGraphBuilder.EdgeIntegralOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.PostGraphBuilder.EdgeIntegralOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.PostGraphBuilder.EntityType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.PostGraphBuilder.EntityType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.PostGraphBuilder.EvalutionErrors
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.PostGraphBuilder.EvalutionErrors
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.PostGraphBuilder.FaceIntegralOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.PostGraphBuilder.FaceIntegralOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.PostGraphBuilder.GeometryValue
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.PostGraphBuilder.GeometryValue
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.PostGraphBuilder.IncompatibleResult
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.PostGraphBuilder.IncompatibleResult
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.PostGraphBuilder.NodalCombination
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.PostGraphBuilder.NodalCombination
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.PreTestExciterConfigBuilder.MethodChoiceType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.PreTestExciterConfigBuilder.MethodChoiceType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.PreTestExciterConfigBuilder.OffAxisAngleChoiceType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.PreTestExciterConfigBuilder.OffAxisAngleChoiceType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.PreTestExportUnvBuilder.FileUnitsOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.PreTestExportUnvBuilder.FileUnitsOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.PreTestSensorConfigBuilder.AlgorithmChoiceType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.PreTestSensorConfigBuilder.AlgorithmChoiceType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.PreTestSolutionBuilder.ModeConversionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.PreTestSolutionBuilder.ModeConversionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ProjectNodesToCadGeometryBuilder.ListingOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ProjectNodesToCadGeometryBuilder.ListingOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ProjectNodesToCadGeometryBuilder.Operation
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ProjectNodesToCadGeometryBuilder.Operation
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.RadiusType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.RadiusType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ReassignElementsBuilder.ElementDimensionOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ReassignElementsBuilder.ElementDimensionOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ReassignElementsBuilder.ElementTypeOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ReassignElementsBuilder.ElementTypeOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.responsesimulation.CombinationEvaluationOptions.EvaluationMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.responsesimulation.CombinationEvaluationOptions.EvaluationMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.responsesimulation.CombinationEvaluationOptions.MultipleExcitationCombinationMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.responsesimulation.CombinationEvaluationOptions.MultipleExcitationCombinationMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.responsesimulation.CoordinateSystem
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.responsesimulation.CoordinateSystem
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.responsesimulation.CSDExcitation.CorrelationType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.responsesimulation.CSDExcitation.CorrelationType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.responsesimulation.DataLocation.Beam
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.responsesimulation.DataLocation.Beam
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.responsesimulation.DataLocation.Element
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.responsesimulation.DataLocation.Element
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.responsesimulation.DataLocation.Shell
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.responsesimulation.DataLocation.Shell
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.responsesimulation.DDAMComponentData.LoadingType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.responsesimulation.DDAMComponentData.LoadingType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.responsesimulation.DDAMComponentData.ResponseType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.responsesimulation.DDAMComponentData.ResponseType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.responsesimulation.DDAMExcitation.CoefficientDefinitionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.responsesimulation.DDAMExcitation.CoefficientDefinitionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.responsesimulation.DDAMExcitation.LoadingType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.responsesimulation.DDAMExcitation.LoadingType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.responsesimulation.DDAMExcitation.MountingType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.responsesimulation.DDAMExcitation.MountingType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.responsesimulation.DDAMExcitation.ResponseType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.responsesimulation.DDAMExcitation.ResponseType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.responsesimulation.DDAMExcitation.ShipType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.responsesimulation.DDAMExcitation.ShipType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.responsesimulation.DirectionDataComponent
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.responsesimulation.DirectionDataComponent
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.responsesimulation.ElementalFunctionEvalBeamLocation
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.responsesimulation.ElementalFunctionEvalBeamLocation
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.responsesimulation.ElementLocation
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.responsesimulation.ElementLocation
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.responsesimulation.EvaluationParameters.AnalysisIntegrationMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.responsesimulation.EvaluationParameters.AnalysisIntegrationMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.responsesimulation.EvaluationResultType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.responsesimulation.EvaluationResultType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.responsesimulation.Excitation.Component
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.responsesimulation.Excitation.Component
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.responsesimulation.ExcitationBuilder.ExcitationLocationType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.responsesimulation.ExcitationBuilder.ExcitationLocationType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.responsesimulation.FrequencyDefinition.Definition
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.responsesimulation.FrequencyDefinition.Definition
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.responsesimulation.FrequencyDefinition.InterpolationMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.responsesimulation.FrequencyDefinition.InterpolationMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.responsesimulation.InitialConditions.EntryMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.responsesimulation.InitialConditions.EntryMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.responsesimulation.InitialConditions.Type
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.responsesimulation.InitialConditions.Type
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.responsesimulation.InterpolationMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.responsesimulation.InterpolationMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.responsesimulation.NodalAveragingOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.responsesimulation.NodalAveragingOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.responsesimulation.NodalFunctionEvalBeamLocation
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.responsesimulation.NodalFunctionEvalBeamLocation
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.responsesimulation.NodalFunctionEvalRequest
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.responsesimulation.NodalFunctionEvalRequest
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.responsesimulation.NodalFunctionEvalShellLocation
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.responsesimulation.NodalFunctionEvalShellLocation
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.responsesimulation.NodalFunctionExcitation.Type
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.responsesimulation.NodalFunctionExcitation.Type
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.responsesimulation.ResponseDomainDefinitionMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.responsesimulation.ResponseDomainDefinitionMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.responsesimulation.RmsLcrEvaluationMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.responsesimulation.RmsLcrEvaluationMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.responsesimulation.RSEvent.AnalysisType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.responsesimulation.RSEvent.AnalysisType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.responsesimulation.RSEvent.DdamFormulationType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.responsesimulation.RSEvent.DdamFormulationType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.responsesimulation.RSEvent.DurationOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.responsesimulation.RSEvent.DurationOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.responsesimulation.RSEvent.ResultFileType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.responsesimulation.RSEvent.ResultFileType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.responsesimulation.RSEvent.SpacingType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.responsesimulation.RSEvent.SpacingType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.responsesimulation.RSEvent.Type
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.responsesimulation.RSEvent.Type
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.responsesimulation.RSEventSolverParameters.DdamCoefficientType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.responsesimulation.RSEventSolverParameters.DdamCoefficientType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.responsesimulation.SensorCoordinateType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.responsesimulation.SensorCoordinateType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.responsesimulation.SensorResultType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.responsesimulation.SensorResultType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.responsesimulation.SensorType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.responsesimulation.SensorType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.responsesimulation.ShellElementEvaluationLocation
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.responsesimulation.ShellElementEvaluationLocation
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.responsesimulation.StrainGageOrientationPlane
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.responsesimulation.StrainGageOrientationPlane
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.responsesimulation.StrainGagePlacementType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.responsesimulation.StrainGagePlacementType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.responsesimulation.StrainGageResult
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.responsesimulation.StrainGageResult
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.responsesimulation.StrainGageShellElementFaceType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.responsesimulation.StrainGageShellElementFaceType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.responsesimulation.StrainGageType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.responsesimulation.StrainGageType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.responsesimulation.StrengthStressCriteria
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.responsesimulation.StrengthStressCriteria
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.responsesimulation.StrengthStressMaterialDefinitionMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.responsesimulation.StrengthStressMaterialDefinitionMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.responsesimulation.StrengthStressOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.responsesimulation.StrengthStressOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.responsesimulation.TranslationalNodalFunctionExcitationBuilder.RotationAxisType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.responsesimulation.TranslationalNodalFunctionExcitationBuilder.RotationAxisType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.responsesimulation.TransmissibilityEvaluationSettingBuilder.MotionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.responsesimulation.TransmissibilityEvaluationSettingBuilder.MotionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.responsesimulation.VelocityImpactExcitationBuilder.ImpactMethodType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.responsesimulation.VelocityImpactExcitationBuilder.ImpactMethodType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.responsesimulation.VelocityImpactParameters.StartPositionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.responsesimulation.VelocityImpactParameters.StartPositionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.Result.BeamEnd
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.Result.BeamEnd
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.Result.Complex
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.Result.Complex
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.Result.Component
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.Result.Component
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.Result.ComputationType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.Result.ComputationType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.Result.CoordinateSystem
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.Result.CoordinateSystem
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.Result.CoordinateSystemSource
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.Result.CoordinateSystemSource
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.Result.DataType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.Result.DataType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.Result.DeformationScale
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.Result.DeformationScale
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.Result.ElementValueCriterion
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.Result.ElementValueCriterion
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.Result.Filetype
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.Result.Filetype
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.Result.GroupContainer
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.Result.GroupContainer
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.Result.LoadcaseValueType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.Result.LoadcaseValueType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.Result.Location
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.Result.Location
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.Result.Quantity
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.Result.Quantity
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.Result.Section
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.Result.Section
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.Result.SolutionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.Result.SolutionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.Result.TensorDerivedAbsolute
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.Result.TensorDerivedAbsolute
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ResultMeasure.Operation
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ResultMeasure.Operation
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ResultMeasure.SubsetSelection
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ResultMeasure.SubsetSelection
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ResultProbeBuilder.CombineAcrossEntities
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ResultProbeBuilder.CombineAcrossEntities
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ResultProbeBuilder.CombineAcrossIterations
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ResultProbeBuilder.CombineAcrossIterations
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ResultProbeBuilder.EdgeIntegral
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ResultProbeBuilder.EdgeIntegral
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ResultProbeBuilder.ErrorHandling
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ResultProbeBuilder.ErrorHandling
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ResultProbeBuilder.FaceIntegral
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ResultProbeBuilder.FaceIntegral
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ResultProbeBuilder.GeometryValue
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ResultProbeBuilder.GeometryValue
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ResultProbeBuilder.IterationSelection
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ResultProbeBuilder.IterationSelection
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ResultProbeBuilder.IterationType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ResultProbeBuilder.IterationType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ResultProbeBuilder.LoadcaseSelection
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ResultProbeBuilder.LoadcaseSelection
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ResultProbeBuilder.NodalCombination
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ResultProbeBuilder.NodalCombination
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ResultProbeBuilder.SelectionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ResultProbeBuilder.SelectionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ResultsCombinationBuilder.EvaluationError
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ResultsCombinationBuilder.EvaluationError
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ResultsCombinationBuilder.IncompatibleResults
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ResultsCombinationBuilder.IncompatibleResults
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ResultsCombinationBuilder.NoData
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ResultsCombinationBuilder.NoData
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ResultsCombinationBuilder.Output
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ResultsCombinationBuilder.Output
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ResultsEnvelopeBuilder.IncompatibleResults
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ResultsEnvelopeBuilder.IncompatibleResults
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ResultsEnvelopeBuilder.NoData
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ResultsEnvelopeBuilder.NoData
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ResultsEnvelopeBuilder.Operation
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ResultsEnvelopeBuilder.Operation
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ResultsEnvelopeBuilder.Output
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ResultsEnvelopeBuilder.Output
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ResultsManipulationBuilder.Action
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ResultsManipulationBuilder.Action
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ResultsManipulationBuilder.ElementValueAtNode
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ResultsManipulationBuilder.ElementValueAtNode
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ResultsManipulationBuilder.OutputResultType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ResultsManipulationBuilder.OutputResultType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ResultsManipulationBuilder.ResultAppendMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ResultsManipulationBuilder.ResultAppendMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ResultsManipulationBuilder.UnitsSystem
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ResultsManipulationBuilder.UnitsSystem
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ResultsReductionBuilder.EvaluationError
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ResultsReductionBuilder.EvaluationError
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ResultsReductionBuilder.IncompatibleResults
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ResultsReductionBuilder.IncompatibleResults
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ResultsReductionBuilder.NoData
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ResultsReductionBuilder.NoData
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ResultsReductionBuilder.Output
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ResultsReductionBuilder.Output
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ResultVariable.NodalCombination
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ResultVariable.NodalCombination
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ShellEADBuilder.MaterialOrientationMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ShellEADBuilder.MaterialOrientationMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ShellEADBuilder.State
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ShellEADBuilder.State
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.SimBCDisplay.Mode
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.SimBCDisplay.Mode
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.SimBcPlotContoursBuilder.PlotType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.SimBcPlotContoursBuilder.PlotType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.SimBcPlotContoursBuilder.ResolveOverlapType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.SimBcPlotContoursBuilder.ResolveOverlapType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.SimBcXyPlotBuilder.ResolveMultipleMatches
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.SimBcXyPlotBuilder.ResolveMultipleMatches
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.SimConditionSeqMgr.FileFormat
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.SimConditionSeqMgr.FileFormat
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.SimConditionSequence.OutOfRangeBehavior
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.SimConditionSequence.OutOfRangeBehavior
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.SimLbcFolder.Type
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.SimLbcFolder.Type
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.SimLoadRecipeMapEntryTargetTypes.TargetTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.SimLoadRecipeMapEntryTargetTypes.TargetTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.SimLoadRecipeMapping.OrientationTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.SimLoadRecipeMapping.OrientationTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.SimLoadRecipeTypes.DataTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.SimLoadRecipeTypes.DataTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.SimLoadRecipeTypes.LoadConditionHandling
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.SimLoadRecipeTypes.LoadConditionHandling
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.SimLoadSet.Type
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.SimLoadSet.Type
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.SimResultReference.Type
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.SimResultReference.Type
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.SimSolution.SetupCheckOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.SimSolution.SetupCheckOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.SimSolution.SolveOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.SimSolution.SolveOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.SimSolution.StepPosition
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.SimSolution.StepPosition
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.SolidPropertyCheckBuilder.UserUnit
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.SolidPropertyCheckBuilder.UserUnit
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.SolverAppendOption.ImportBehaviorOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.SolverAppendOption.ImportBehaviorOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.SolverAppendOption.MergeOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.SolverAppendOption.MergeOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.SolverAppendOption.SolutionOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.SolverAppendOption.SolutionOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.SpiderElementBuilder.NewMeshType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.SpiderElementBuilder.NewMeshType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.SpringEADBuilder.State
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.SpringEADBuilder.State
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.SuppressHoleBuilder.OptionChoice
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.SuppressHoleBuilder.OptionChoice
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.SuppressHoleBuilder.OptionPointCreate
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.SuppressHoleBuilder.OptionPointCreate
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.SurfaceCoatBuilder.SelectionMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.SurfaceCoatBuilder.SelectionMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.SweepBetweenMeshBuilder.Types
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.SweepBetweenMeshBuilder.Types
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.ThicknessBuilder.EntityType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.ThicknessBuilder.EntityType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.TransientResultsReductionBuilder.EvaluationError
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.TransientResultsReductionBuilder.EvaluationError
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.TransientResultsReductionBuilder.IncompatibleResults
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.TransientResultsReductionBuilder.IncompatibleResults
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.TransientResultsReductionBuilder.NoData
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.TransientResultsReductionBuilder.NoData
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.WeldBuilder.NumberOfPointsOnEdgeType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.WeldBuilder.NumberOfPointsOnEdgeType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.WeldBuilder.PointOnEdgeType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.WeldBuilder.PointOnEdgeType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.WeldBuilder.WeldLocation
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.WeldBuilder.WeldLocation
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.XyFunctionDataType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.XyFunctionDataType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.XyFunctionGeneralType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.XyFunctionGeneralType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.XyFunctionLoadType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.XyFunctionLoadType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.XyFunctionMacroType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.XyFunctionMacroType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.XyFunctionMaterialType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.XyFunctionMaterialType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.XyFunctionMeasure
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.XyFunctionMeasure
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.XyFunctionMotionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.XyFunctionMotionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.XyFunctionResponseType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.XyFunctionResponseType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.XyFunctionUnit
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.XyFunctionUnit
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.xyplot.AxisDBScale
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.xyplot.AxisDBScale
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.xyplot.AxisType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.xyplot.AxisType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.xyplot.BarColorOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.xyplot.BarColorOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.xyplot.ComplexOption2D
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.xyplot.ComplexOption2D
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.xyplot.ComplexOption3D
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.xyplot.ComplexOption3D
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.xyplot.ContouringRange
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.xyplot.ContouringRange
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.xyplot.DecimalFormat
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.xyplot.DecimalFormat
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.xyplot.Fonttype
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.xyplot.Fonttype
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.xyplot.GraphStyle
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.xyplot.GraphStyle
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.xyplot.GridStyle
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.xyplot.GridStyle
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.xyplot.PhaseRangeOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.xyplot.PhaseRangeOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.xyplot.PlateColorOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.xyplot.PlateColorOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.xyplot.PlotType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.xyplot.PlotType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.xyplot.PointMarker
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.xyplot.PointMarker
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.xyplot.Preference.NewWindowChoice
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.xyplot.Preference.NewWindowChoice
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.xyplot.Preference.TargetGraphicWindowOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.xyplot.Preference.TargetGraphicWindowOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.xyplot.SurfaceColorOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.xyplot.SurfaceColorOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.xyplot.TextAlignment
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.xyplot.TextAlignment
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.xyplot.TextOrientation
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.xyplot.TextOrientation
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.xyplot.TextType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.xyplot.TextType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cae.xyplot.UnitSystem
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cae.xyplot.UnitSystem
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.CaeObjectType.CaeSubType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.CaeObjectType.CaeSubType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.AcrossVoids.MotionTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.AcrossVoids.MotionTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.ArcOutputTypeCiBuilder.OutputTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.ArcOutputTypeCiBuilder.OutputTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.ArcOutputTypeCiBuilder.SplineArcOutputTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.ArcOutputTypeCiBuilder.SplineArcOutputTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.ArcOutputTypeCiBuilder.SplineFitToleranceTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.ArcOutputTypeCiBuilder.SplineFitToleranceTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.ArcOutputTypeCiBuilder.SplineLineOutputTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.ArcOutputTypeCiBuilder.SplineLineOutputTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.AreaMillingContainment.CutDirectionTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.AreaMillingContainment.CutDirectionTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.AreaMillingNonSteepContainment.AmPocketDirTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.AreaMillingNonSteepContainment.AmPocketDirTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.AreaMillingNonSteepContainment.AutoPatCenterTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.AreaMillingNonSteepContainment.AutoPatCenterTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.AreaMillingNonSteepContainment.PatternDirectionTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.AreaMillingNonSteepContainment.PatternDirectionTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.AreaMillingSteepContainment.CutLevelTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.AreaMillingSteepContainment.CutLevelTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.Blade.MaterialSideType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.Blade.MaterialSideType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.BladeCutLevels.DepthModeTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.BladeCutLevels.DepthModeTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.BladeCutLevels.DepthPerCutTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.BladeCutLevels.DepthPerCutTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.BladeCutLevels.HubExtensionsTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.BladeCutLevels.HubExtensionsTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.BladeCutLevels.IncompleteLevelsTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.BladeCutLevels.IncompleteLevelsTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.BladeCutLevels.RangeDepthTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.BladeCutLevels.RangeDepthTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.BladeCutStart.Type
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.BladeCutStart.Type
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.BladeEdge.EdgeDefinitionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.BladeEdge.EdgeDefinitionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.BladeEdge.EdgePointType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.BladeEdge.EdgePointType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.BladeFinishGeom.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.BladeFinishGeom.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.BladeStartPoint.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.BladeStartPoint.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.BlankIpw.StatusTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.BlankIpw.StatusTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.BoundaryMemberSet.ConnectMemberType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.BoundaryMemberSet.ConnectMemberType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.BoundaryMillingMemberSet.FeedUnitTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.BoundaryMillingMemberSet.FeedUnitTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.BoundarySet.BoundaryTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.BoundarySet.BoundaryTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.BoundarySet.PlaneTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.BoundarySet.PlaneTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.BoundarySet.ToolPositionTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.BoundarySet.ToolPositionTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.BoundarySet.ToolSideTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.BoundarySet.ToolSideTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.BoundaryTurnBlank.Position
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.BoundaryTurnBlank.Position
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.BoundaryTurnBlank.Type
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.BoundaryTurnBlank.Type
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.BoundaryTurnMemberCorner.AngleValueType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.BoundaryTurnMemberCorner.AngleValueType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.BoundaryTurnMemberCorner.CornerType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.BoundaryTurnMemberCorner.CornerType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.BoundaryTurnMemberCorner.FeedType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.BoundaryTurnMemberCorner.FeedType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.BoundaryTurnMemberCorner.ShapeType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.BoundaryTurnMemberCorner.ShapeType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.BoundaryTurnMemberFeed.FeedType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.BoundaryTurnMemberFeed.FeedType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.BoundaryTurnMemberFineFinishCorner.AppliedTo
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.BoundaryTurnMemberFineFinishCorner.AppliedTo
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.BoundaryTurnMemberFineFinishCorner.Cleanup
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.BoundaryTurnMemberFineFinishCorner.Cleanup
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.BoundaryTurnMemberFineFinishCorner.ValueType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.BoundaryTurnMemberFineFinishCorner.ValueType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.BoundaryTurnMemberFineFinishOffset.StatusValue
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.BoundaryTurnMemberFineFinishOffset.StatusValue
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.BoundaryTurnMemberFineFinishOffset.TypeValue
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.BoundaryTurnMemberFineFinishOffset.TypeValue
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.BoundaryTurnMemberOffset.DistanceTypeMode
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.BoundaryTurnMemberOffset.DistanceTypeMode
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.BoundaryTurnMemberOffset.MethodType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.BoundaryTurnMemberOffset.MethodType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.BoundaryTurnMemberOffset.ModeType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.BoundaryTurnMemberOffset.ModeType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.BoundaryTurnMemberSet.ConcaveCornersTypeValue
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.BoundaryTurnMemberSet.ConcaveCornersTypeValue
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.BoundaryTurnSet.FeedUnitTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.BoundaryTurnSet.FeedUnitTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.BoundaryTurnVariableStock.PositionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.BoundaryTurnVariableStock.PositionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.CAMAttribute.ValueType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.CAMAttribute.ValueType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.CamInspectionOperationCsysreferencetypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.CamInspectionOperationCsysreferencetypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.CamInspectionOperationExtenttypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.CamInspectionOperationExtenttypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.CamInspectionOperationFeaturetypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.CamInspectionOperationFeaturetypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.CamInspectionOperationInneroutertypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.CamInspectionOperationInneroutertypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.CAMObject.Attr
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.CAMObject.Attr
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.CAMObject.FeedRateUnit
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.CAMObject.FeedRateUnit
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.CAMObject.Status
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.CAMObject.Status
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.CAMSession.ObjectSubtype
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.CAMSession.ObjectSubtype
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.CAMSetup.OutputUnits
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.CAMSetup.OutputUnits
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.CAMSetup.Paste
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.CAMSetup.Paste
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.CAMSetup.PostprocessSettingsOutputWarning
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.CAMSetup.PostprocessSettingsOutputWarning
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.CAMSetup.PostprocessSettingsReviewTool
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.CAMSetup.PostprocessSettingsReviewTool
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.CAMSetup.Ude
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.CAMSetup.Ude
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.CAMSetup.View
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.CAMSetup.View
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.CenterlineDrillTurningBuilder.CycleTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.CenterlineDrillTurningBuilder.CycleTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.CenterlineDrillTurningBuilder.DepthReferenceTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.CenterlineDrillTurningBuilder.DepthReferenceTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.CenterlineDrillTurningBuilder.DepthTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.CenterlineDrillTurningBuilder.DepthTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.CenterlineDrillTurningBuilder.DrillingLocationTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.CenterlineDrillTurningBuilder.DrillingLocationTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.CenterlineDrillTurningBuilder.DwellTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.CenterlineDrillTurningBuilder.DwellTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.CenterlineDrillTurningBuilder.FinalRetractTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.CenterlineDrillTurningBuilder.FinalRetractTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.CenterlineDrillTurningBuilder.OutputOptionTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.CenterlineDrillTurningBuilder.OutputOptionTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.CenterlineDrillTurningBuilder.RemovalIncrementTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.CenterlineDrillTurningBuilder.RemovalIncrementTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.CenterlineDrillTurningBuilder.SpindleStopTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.CenterlineDrillTurningBuilder.SpindleStopTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.CenterlineDrillTurningBuilder.StartPositionTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.CenterlineDrillTurningBuilder.StartPositionTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.ChipControl.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.ChipControl.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.CircularAboutAxisMoveBuilder.AxisType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.CircularAboutAxisMoveBuilder.AxisType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.CircularAboutAxisMoveBuilder.EndType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.CircularAboutAxisMoveBuilder.EndType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.CircularAboutAxisMoveBuilder.ExtensionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.CircularAboutAxisMoveBuilder.ExtensionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.CleanupOutput.GeomTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.CleanupOutput.GeomTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.CollisionPairBuilder.Filter
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.CollisionPairBuilder.Filter
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.ConvertFromMCDBuilder.MachineTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.ConvertFromMCDBuilder.MachineTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.ConvertFromMCDBuilder.PocketLocationTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.ConvertFromMCDBuilder.PocketLocationTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.CornerControlBuilder.AdjustFeedRateOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.CornerControlBuilder.AdjustFeedRateOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.CornerControlBuilder.CornerControlMethods
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.CornerControlBuilder.CornerControlMethods
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.CornerControlBuilder.SlowdownDistanceOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.CornerControlBuilder.SlowdownDistanceOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.CornerControlBuilder.SmoothCornersAtOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.CornerControlBuilder.SmoothCornersAtOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.CornerControlBuilder.SmoothingOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.CornerControlBuilder.SmoothingOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.CutAngle.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.CutAngle.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.CutBand.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.CutBand.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.Cutcom.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.Cutcom.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.CutDwell.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.CutDwell.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.CutLevel.MeasureTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.CutLevel.MeasureTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.CutLevel.RangeTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.CutLevel.RangeTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.CutLevel.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.CutLevel.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.CutLevelPlanar.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.CutLevelPlanar.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.CutParametersActionWhenGougingTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.CutParametersActionWhenGougingTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.CutParametersAdjacentBladesTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.CutParametersAdjacentBladesTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.CutParametersCleanupControlTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.CutParametersCleanupControlTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.CutParametersCornerFindingTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.CutParametersCornerFindingTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.CutParametersCutConnectionTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.CutParametersCutConnectionTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.CutParametersCutOrderTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.CutParametersCutOrderTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.CutParametersExtendAtStartMode
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.CutParametersExtendAtStartMode
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.CutParametersExtendFloorTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.CutParametersExtendFloorTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.CutParametersFilletsTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.CutParametersFilletsTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.CutParametersFinishPassesTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.CutParametersFinishPassesTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.CutParametersIpwTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.CutParametersIpwTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.CutParametersPatternDirectionTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.CutParametersPatternDirectionTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.CutParametersPlungeDirectionTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.CutParametersPlungeDirectionTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.CutParametersProfileCutRegionsTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.CutParametersProfileCutRegionsTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.CutParametersRegionSequencingTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.CutParametersRegionSequencingTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.CutParametersSimplifyShapesTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.CutParametersSimplifyShapesTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.CutParametersToolRunOffTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.CutParametersToolRunOffTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.CutParametersTraverseOpenPassesTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.CutParametersTraverseOpenPassesTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.CutParametersTrimControlTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.CutParametersTrimControlTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.CutPatternBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.CutPatternBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.CutRegionsBuilder.CutRegionsContainmentTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.CutRegionsBuilder.CutRegionsContainmentTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.CutRegionsBuilder.CutRegionsProgramTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.CutRegionsBuilder.CutRegionsProgramTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.CutRegionsBuilder.CutRegionsStatusTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.CutRegionsBuilder.CutRegionsStatusTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.CutSides.SideType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.CutSides.SideType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.CutStrategy.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.CutStrategy.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.Cycle.DwellType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.Cycle.DwellType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.Cycle.MotionOutputTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.Cycle.MotionOutputTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.CylinderMillingBuilder.BlankDiameterTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.CylinderMillingBuilder.BlankDiameterTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.CylinderMillingBuilder.CutPatternTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.CylinderMillingBuilder.CutPatternTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.CylinderMillingBuilder.DepthPerRevolutionTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.CylinderMillingBuilder.DepthPerRevolutionTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.CylinderMillingBuilder.DiameterForHelixTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.CylinderMillingBuilder.DiameterForHelixTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.CylinderMillingCutParameters.CutDirectionTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.CylinderMillingCutParameters.CutDirectionTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.DeltaMoveBuilder.IntentType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.DeltaMoveBuilder.IntentType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.DisplayPath.PathDisplayTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.DisplayPath.PathDisplayTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.DisplayTool.ToolDisplayTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.DisplayTool.ToolDisplayTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.DmAmBuilder.AmCustomStartTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.DmAmBuilder.AmCustomStartTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.DmAmBuilder.AmCutPatternTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.DmAmBuilder.AmCutPatternTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.DmAmBuilder.AmCutTraversalTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.DmAmBuilder.AmCutTraversalTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.DmAmBuilder.AmPocketDirTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.DmAmBuilder.AmPocketDirTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.DmAmBuilder.AutoPatCenterTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.DmAmBuilder.AutoPatCenterTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.DmAmBuilder.SteepOptTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.DmAmBuilder.SteepOptTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.DmBndBuilder.ApplyFilletAtTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.DmBndBuilder.ApplyFilletAtTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.DmBndBuilder.BndCustomStartTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.DmBndBuilder.BndCustomStartTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.DmBndBuilder.BndCutPatternTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.DmBndBuilder.BndCutPatternTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.DmBndBuilder.BndCutTraversalTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.DmBndBuilder.BndCutTraversalTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.DmBndBuilder.BndPatternCenterTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.DmBndBuilder.BndPatternCenterTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.DmBndBuilder.BndPocketDirTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.DmBndBuilder.BndPocketDirTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.DmBndBuilder.UsePartTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.DmBndBuilder.UsePartTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.DmCmBuilder.ContactPositionRingHeightType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.DmCmBuilder.ContactPositionRingHeightType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.DmCmBuilder.DmCmCutPointType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.DmCmBuilder.DmCmCutPointType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.DmCmBuilder.ExtDisType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.DmCmBuilder.ExtDisType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.DmCmBuilder.ToolAxisGuideVectorType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.DmCmBuilder.ToolAxisGuideVectorType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.DmCmMultiplePassesCiBuilder.OrderType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.DmCmMultiplePassesCiBuilder.OrderType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.DmCmMultiplePassesCiBuilder.WallStepMethodType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.DmCmMultiplePassesCiBuilder.WallStepMethodType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.DmCurveBuilder.DpmcvStepTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.DmCurveBuilder.DpmcvStepTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.DmRadBuilder.RadCutMethodType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.DmRadBuilder.RadCutMethodType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.DmRadBuilder.RadStepoverTypeType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.DmRadBuilder.RadStepoverTypeType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.DmRadBuilder.RadTraverseDirType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.DmRadBuilder.RadTraverseDirType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.DmRotaryFloorFinishBuilder.CutDirection
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.DmRotaryFloorFinishBuilder.CutDirection
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.DmRotaryFloorFinishBuilder.CutDirType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.DmRotaryFloorFinishBuilder.CutDirType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.DmRotaryFloorFinishBuilder.DirectionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.DmRotaryFloorFinishBuilder.DirectionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.DmRotaryFloorFinishBuilder.DmSurfCutAreaType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.DmRotaryFloorFinishBuilder.DmSurfCutAreaType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.DmRotaryFloorFinishBuilder.DmSurfCutStepTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.DmRotaryFloorFinishBuilder.DmSurfCutStepTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.DmRotaryFloorFinishBuilder.GougeActionTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.DmRotaryFloorFinishBuilder.GougeActionTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.DmRotaryFloorFinishBuilder.MatSideType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.DmRotaryFloorFinishBuilder.MatSideType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.DmSpiralBuilder.DmSpiralStepoverTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.DmSpiralBuilder.DmSpiralStepoverTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.DmSurfBuilder.CutDirection
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.DmSurfBuilder.CutDirection
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.DmSurfBuilder.DmSurfCutAreaType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.DmSurfBuilder.DmSurfCutAreaType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.DmSurfBuilder.DmSurfCutPatternType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.DmSurfBuilder.DmSurfCutPatternType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.DmSurfBuilder.DmSurfCutStepType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.DmSurfBuilder.DmSurfCutStepType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.DmSurfBuilder.DmSurfCutTraversalType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.DmSurfBuilder.DmSurfCutTraversalType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.DmSurfBuilder.GougeActionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.DmSurfBuilder.GougeActionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.DmSurfBuilder.MatSideType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.DmSurfBuilder.MatSideType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.DmSurfBuilder.ToolPositionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.DmSurfBuilder.ToolPositionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.DPMItpBuilder.CutTypeOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.DPMItpBuilder.CutTypeOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.DPMItpBuilder.SelectionMethodOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.DPMItpBuilder.SelectionMethodOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.DPMItpBuilder.StepMethodOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.DPMItpBuilder.StepMethodOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.DPMItpBuilder.StepoverTypeOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.DPMItpBuilder.StepoverTypeOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.DPMItpBuilder.ToolPositionOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.DPMItpBuilder.ToolPositionOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.DrillSurfaceBuilder.SurfaceType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.DrillSurfaceBuilder.SurfaceType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.DrillTapToolBuilder.ToolTapHolderTypeTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.DrillTapToolBuilder.ToolTapHolderTypeTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.DrillTapToolBuilder.ToolThreadFormMethodTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.DrillTapToolBuilder.ToolThreadFormMethodTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.DrillThreadMillToolBuilder.ToolFormTypeTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.DrillThreadMillToolBuilder.ToolFormTypeTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.DriveMode.Type
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.DriveMode.Type
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.EditSubopCommand.ContainmentTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.EditSubopCommand.ContainmentTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.EditSubopCommand.PointTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.EditSubopCommand.PointTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.FacesSequence.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.FacesSequence.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.fbm.FeatureGeometry.SequenceDirectionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.fbm.FeatureGeometry.SequenceDirectionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.fbm.FeatureGeometry.SequencePatternType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.fbm.FeatureGeometry.SequencePatternType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.fbm.FeatureGeometry.SortOrder
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.fbm.FeatureGeometry.SortOrder
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.fbm.ThreadFeatureGeometry.Form
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.fbm.ThreadFeatureGeometry.Form
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.fbm.ThreadFeatureGeometry.Rotation
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.fbm.ThreadFeatureGeometry.Rotation
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.fbm.ThreadFeatureGeometry.ThreadDataSource
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.fbm.ThreadFeatureGeometry.ThreadDataSource
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.FeatureMillingCutParameters.CuttingDirectionTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.FeatureMillingCutParameters.CuttingDirectionTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.FeatureProcessBuilder.FeatureGroupingType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.FeatureProcessBuilder.FeatureGroupingType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.FeatureProcessBuilder.FeatureProcessType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.FeatureProcessBuilder.FeatureProcessType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.FeatureRecognitionBuilder.GeometrySearch
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.FeatureRecognitionBuilder.GeometrySearch
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.FeatureRecognitionBuilder.RecognitionEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.FeatureRecognitionBuilder.RecognitionEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.FeatureTeaching.RuleMatchOptionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.FeatureTeaching.RuleMatchOptionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.FeedRapidOutputMode
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.FeedRapidOutputMode
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.FeedRateUnit
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.FeedRateUnit
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.FeedsBuilder.RecalcuateBasedOn
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.FeedsBuilder.RecalcuateBasedOn
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.FeedsOptimizationData.FeedRateRangeType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.FeedsOptimizationData.FeedRateRangeType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.FinishDwell.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.FinishDwell.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.FirstPlunge.Positions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.FirstPlunge.Positions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.FlowBuilder.FlowEditTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.FlowBuilder.FlowEditTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.FlowBuilder.FlowOffsetModeType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.FlowBuilder.FlowOffsetModeType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.FlowCutSteepContainment.CutDirectionTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.FlowCutSteepContainment.CutDirectionTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.FlowCutSteepContainment.CutLevelTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.FlowCutSteepContainment.CutLevelTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.FlowCutSteepContainment.PatternDirectionTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.FlowCutSteepContainment.PatternDirectionTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.FlowCutSteepContainment.SteepCutDirectionTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.FlowCutSteepContainment.SteepCutDirectionTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.FollowPartMoveBuilder.MoveDirectionTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.FollowPartMoveBuilder.MoveDirectionTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.GeometrySet.LoopsIgnoreTypes
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.GeometrySet.LoopsIgnoreTypes
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.GeometrySet.MaterialSideTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.GeometrySet.MaterialSideTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.GrooveMillingBuilder.LevelSequencingType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.GrooveMillingBuilder.LevelSequencingType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.GrooveToolBuilder.HolderGrooveHands
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.GrooveToolBuilder.HolderGrooveHands
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.GrooveToolBuilder.HolderHands
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.GrooveToolBuilder.HolderHands
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.GrooveToolBuilder.HolderStyles
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.GrooveToolBuilder.HolderStyles
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.GrooveToolBuilder.InsertShapes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.GrooveToolBuilder.InsertShapes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.GroupFeatures.FeaturesToGroupTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.GroupFeatures.FeaturesToGroupTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.HoleBossGeom.DepthLimitTypes
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.HoleBossGeom.DepthLimitTypes
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.HoleBossGeom.FormPitchTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.HoleBossGeom.FormPitchTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.HoleBossGeom.FormTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.HoleBossGeom.FormTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.HoleBossGeom.HoleBossTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.HoleBossGeom.HoleBossTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.HoleBossGeom.OptimizationTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.HoleBossGeom.OptimizationTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.HoleBossGeom.RotationTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.HoleBossGeom.RotationTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.HoleBossSet.DepthLimitTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.HoleBossSet.DepthLimitTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.HoleMakingBuilder.ControlPointTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.HoleMakingBuilder.ControlPointTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.HoleMakingBuilder.ModelDepthTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.HoleMakingBuilder.ModelDepthTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.HoleMakingBuilder.ToolAxisTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.HoleMakingBuilder.ToolAxisTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InferredDouble.Lock
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InferredDouble.Lock
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.Inheritance
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.Inheritance
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InitialProfilePlunge.Modes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InitialProfilePlunge.Modes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InPathEventDataBuilder.LocationMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InPathEventDataBuilder.LocationMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionAlignmentBuilder.AlignmentDirections
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionAlignmentBuilder.AlignmentDirections
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionAlignmentBuilder.AlignTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionAlignmentBuilder.AlignTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionAlignmentBuilder.IterDevTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionAlignmentBuilder.IterDevTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionAlignmentBuilder.RecallStates
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionAlignmentBuilder.RecallStates
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionAlignmentBuilder.RotateTableDirections
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionAlignmentBuilder.RotateTableDirections
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionAlignmentBuilder.RotateTableMethods
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionAlignmentBuilder.RotateTableMethods
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionAlignmentBuilder.RotateTablePcsUpdateOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionAlignmentBuilder.RotateTablePcsUpdateOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionAlignmentBuilder.RotationAxisOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionAlignmentBuilder.RotationAxisOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionAlignmentBuilder.RotationDirections
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionAlignmentBuilder.RotationDirections
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionAlignmentBuilder.RotationMethods
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionAlignmentBuilder.RotationMethods
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionAlignmentBuilder.SaveStates
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionAlignmentBuilder.SaveStates
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionAlignmentBuilder.XtMethods
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionAlignmentBuilder.XtMethods
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionAlignmentBuilder.YtMethods
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionAlignmentBuilder.YtMethods
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionAlignmentBuilder.ZtMethods
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionAlignmentBuilder.ZtMethods
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionAnalyzeBuilder.DofTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionAnalyzeBuilder.DofTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionAnalyzeOutputBuilder.OutputFormatType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionAnalyzeOutputBuilder.OutputFormatType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionAnalyzeOutputBuilder.ReportingCsysType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionAnalyzeOutputBuilder.ReportingCsysType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionCmmCommandBuilder.AngularUnitsOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionCmmCommandBuilder.AngularUnitsOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionCmmCommandBuilder.CommandTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionCmmCommandBuilder.CommandTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionCmmCommandBuilder.DeviceTypeOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionCmmCommandBuilder.DeviceTypeOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionCmmCommandBuilder.HomePtMethods
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionCmmCommandBuilder.HomePtMethods
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionCmmCommandBuilder.IdnameMethods
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionCmmCommandBuilder.IdnameMethods
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionCmmCommandBuilder.LinearUnitsOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionCmmCommandBuilder.LinearUnitsOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionCmmCommandBuilder.MoveTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionCmmCommandBuilder.MoveTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionCmmCommandBuilder.ProgramNameMethods
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionCmmCommandBuilder.ProgramNameMethods
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionCmmCommandBuilder.PromptVars
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionCmmCommandBuilder.PromptVars
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionCmmCommandBuilder.QisvarTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionCmmCommandBuilder.QisvarTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionCmmCommandBuilder.RevMethods
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionCmmCommandBuilder.RevMethods
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionCmmCommandBuilder.TemperatureUnitsOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionCmmCommandBuilder.TemperatureUnitsOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionCmmCommandBuilder.VarScopes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionCmmCommandBuilder.VarScopes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionCmmCommandBuilder.VarTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionCmmCommandBuilder.VarTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionDeltaMoveBuilder.IntentType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionDeltaMoveBuilder.IntentType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionLinearMoveToPointBuilder.PointTypeEnums
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionLinearMoveToPointBuilder.PointTypeEnums
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionLinkPmiBuilder.CollisionAvoidanceEnumType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionLinkPmiBuilder.CollisionAvoidanceEnumType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionLinkPmiBuilder.CreatePathsOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionLinkPmiBuilder.CreatePathsOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionLinkPmiBuilder.PathOrderTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionLinkPmiBuilder.PathOrderTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionLinkPmiBuilder.PmiScopeTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionLinkPmiBuilder.PmiScopeTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionLinkPmiBuilder.PointOrderTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionLinkPmiBuilder.PointOrderTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionMeasDataBuilder.BoundingType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionMeasDataBuilder.BoundingType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionMeasDataBuilder.DisplayTransformTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionMeasDataBuilder.DisplayTransformTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionMeasDataBuilder.InputFormatType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionMeasDataBuilder.InputFormatType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionMeasurePointBuilder.PointTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionMeasurePointBuilder.PointTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionMethodBuilder.AxisExtrapolationTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionMethodBuilder.AxisExtrapolationTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionMethodBuilder.CylinderFittingTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionMethodBuilder.CylinderFittingTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionMethodBuilder.DatumPlaneFittingTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionMethodBuilder.DatumPlaneFittingTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionMethodBuilder.InspectionModes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionMethodBuilder.InspectionModes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionMethodBuilder.LimitsOfSizeTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionMethodBuilder.LimitsOfSizeTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionMethodBuilder.MethodTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionMethodBuilder.MethodTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionMethodBuilder.OperationTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionMethodBuilder.OperationTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionMethodBuilder.PointSequenceDirectionTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionMethodBuilder.PointSequenceDirectionTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionMethodBuilder.PointSequenceModeTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionMethodBuilder.PointSequenceModeTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionMethodBuilder.PointSequenceStartTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionMethodBuilder.PointSequenceStartTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionMethodBuilder.ProfileDispositionTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionMethodBuilder.ProfileDispositionTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionMethodBuilder.ReferenceFeatureModeTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionMethodBuilder.ReferenceFeatureModeTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionMethodBuilder.ScanCurveModeTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionMethodBuilder.ScanCurveModeTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionMethodBuilder.ScanHelixTurnDirectionTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionMethodBuilder.ScanHelixTurnDirectionTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionMethodBuilder.ScanHelixTurnTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionMethodBuilder.ScanHelixTurnTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionMethodBuilder.ScanModeTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionMethodBuilder.ScanModeTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionMethodBuilder.SurfaceProfileTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionMethodBuilder.SurfaceProfileTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionMethodBuilder.ToleranceDegreeOfFreedomMode
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionMethodBuilder.ToleranceDegreeOfFreedomMode
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionMethodBuilder.TransitionTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionMethodBuilder.TransitionTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionMethodBuilder.UVModeTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionMethodBuilder.UVModeTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionMoveBuilder.DepthMethodTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionMoveBuilder.DepthMethodTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionMoveBuilder.ProbeTipTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionMoveBuilder.ProbeTipTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionMoveBuilder.SensorStrategyTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionMoveBuilder.SensorStrategyTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionMoveBuilder.TipAngleTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionMoveBuilder.TipAngleTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionMoveBuilder.TipModeTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionMoveBuilder.TipModeTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionOperationTransformBuilder.Angle
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionOperationTransformBuilder.Angle
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionOperationTransformBuilder.Line
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionOperationTransformBuilder.Line
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionOperationTransformBuilder.Motion
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionOperationTransformBuilder.Motion
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionOperationTransformBuilder.Result
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionOperationTransformBuilder.Result
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionOperationTransformBuilder.Transform
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionOperationTransformBuilder.Transform
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionOutputOperationBuilder.TypeOutput
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionOutputOperationBuilder.TypeOutput
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionPathBuilder.EntryExitType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionPathBuilder.EntryExitType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionPathBuilder.FirstLastType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionPathBuilder.FirstLastType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionPathBuilder.InspectModeType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionPathBuilder.InspectModeType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionPathBuilder.SequenceType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionPathBuilder.SequenceType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionProbeTrackingBuilder.TipTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionProbeTrackingBuilder.TipTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionSensorBuilder.SensorTipLocationTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionSensorBuilder.SensorTipLocationTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionSensorBuilder.SensorTipTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionSensorBuilder.SensorTipTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionSensorBuilder.SensorTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionSensorBuilder.SensorTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionSensorMassEditBuilder.SensorSelectModeType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionSensorMassEditBuilder.SensorSelectModeType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionSensorMassEditBuilder.SensorStrategyType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionSensorMassEditBuilder.SensorStrategyType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionToleranceOperationBuilder.AngleFormat
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionToleranceOperationBuilder.AngleFormat
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionToleranceOperationBuilder.ParamExtent
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionToleranceOperationBuilder.ParamExtent
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionToleranceOperationBuilder.ParamPriDatum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionToleranceOperationBuilder.ParamPriDatum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionToleranceOperationBuilder.ParamPriDatumModifier
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionToleranceOperationBuilder.ParamPriDatumModifier
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionToleranceOperationBuilder.ParamSecDatum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionToleranceOperationBuilder.ParamSecDatum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionToleranceOperationBuilder.ParamSecDatumModifier
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionToleranceOperationBuilder.ParamSecDatumModifier
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionToleranceOperationBuilder.ParamSubType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionToleranceOperationBuilder.ParamSubType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionToleranceOperationBuilder.ParamTerDatum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionToleranceOperationBuilder.ParamTerDatum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionToleranceOperationBuilder.ParamTerDatumModifier
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionToleranceOperationBuilder.ParamTerDatumModifier
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionToleranceOperationBuilder.ParamTolMatModifier
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionToleranceOperationBuilder.ParamTolMatModifier
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionToleranceOperationBuilder.ParamTolMatModifierDup
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionToleranceOperationBuilder.ParamTolMatModifierDup
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionToleranceOperationBuilder.ParamTolZoneShape
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionToleranceOperationBuilder.ParamTolZoneShape
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionToleranceOperationBuilder.ParamXYZAxis
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionToleranceOperationBuilder.ParamXYZAxis
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionToleranceOperationBuilder.SirVecPCSABS
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionToleranceOperationBuilder.SirVecPCSABS
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionToleranceOperationBuilder.ToleranceSource
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionToleranceOperationBuilder.ToleranceSource
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionToleranceOperationBuilder.TolType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionToleranceOperationBuilder.TolType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionUVGridBuilder.SphereAxisType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionUVGridBuilder.SphereAxisType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.InspectionUVGridBuilder.StartPointType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.InspectionUVGridBuilder.StartPointType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.IpwAnalysisBuilder.ColorControl
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.IpwAnalysisBuilder.ColorControl
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.IpwContainmentCurvesBuilder.ThicknessModeValue
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.IpwContainmentCurvesBuilder.ThicknessModeValue
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.LaserControlPoint.ControlPointTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.LaserControlPoint.ControlPointTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.LaserControlPoint.HeadOrientTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.LaserControlPoint.HeadOrientTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.LaserControlPoint.ProcessTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.LaserControlPoint.ProcessTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.LaserCutoutDefinition.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.LaserCutoutDefinition.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.LaserHeadOrientation.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.LaserHeadOrientation.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.LaserLinearMove.MotionEnds
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.LaserLinearMove.MotionEnds
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.LaserLinearMove.MoveTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.LaserLinearMove.MoveTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.LaserLinearMove.RefTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.LaserLinearMove.RefTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.LaserPiercingPoint.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.LaserPiercingPoint.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.LaserProfileMove.CollisionChecks
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.LaserProfileMove.CollisionChecks
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.LaserProfileMove.InterpMethods
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.LaserProfileMove.InterpMethods
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.LaserProfileMove.ShapeTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.LaserProfileMove.ShapeTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.LaserProfileMove.ToolSides
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.LaserProfileMove.ToolSides
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.LeadAngles.ControlTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.LeadAngles.ControlTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.LevelToLevel.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.LevelToLevel.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.LowerLimit.ActionTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.LowerLimit.ActionTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.LowerLimit.ModeTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.LowerLimit.ModeTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.MaxCutTraverse.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.MaxCutTraverse.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.MillingToolBuilder.ToolDirectionTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.MillingToolBuilder.ToolDirectionTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.MillingTrackpointBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.MillingTrackpointBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.MillOrientGeomBuilder.LowerLimitModes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.MillOrientGeomBuilder.LowerLimitModes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.MillToolBuilder.CutterSubtypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.MillToolBuilder.CutterSubtypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.MinCutDepth.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.MinCutDepth.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.MinCutLength.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.MinCutLength.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.MoveBuilder.Feed
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.MoveBuilder.Feed
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.MoveBuilder.Motion
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.MoveBuilder.Motion
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.MultiBladeGeomBuilder.PartAxisOfRotationTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.MultiBladeGeomBuilder.PartAxisOfRotationTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.MultiDepthCut.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.MultiDepthCut.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.MultiplePassesBuilder.OrderTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.MultiplePassesBuilder.OrderTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.MultiplePassesBuilder.StepMethodTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.MultiplePassesBuilder.StepMethodTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.MultiRamp.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.MultiRamp.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.NCAssistantBuilder.AnalysisTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.NCAssistantBuilder.AnalysisTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.NcmAvoidancePointBuilder.PointStates
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.NcmAvoidancePointBuilder.PointStates
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.NcmAvoidancePointBuilder.ToolAxisUsages
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.NcmAvoidancePointBuilder.ToolAxisUsages
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.NcmClearanceBuilder.ClearanceTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.NcmClearanceBuilder.ClearanceTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.NcmctPartMountingBuilder.LayerTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.NcmctPartMountingBuilder.LayerTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.NcmctPartMountingBuilder.PositioningTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.NcmctPartMountingBuilder.PositioningTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.NcmHoleMachining.CutcomTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.NcmHoleMachining.CutcomTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.NcmHoleMachining.FinalTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.NcmHoleMachining.FinalTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.NcmHoleMachining.InitialTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.NcmHoleMachining.InitialTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.NcmHoleMachining.OverlapTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.NcmHoleMachining.OverlapTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.NcmHoleMachiningEngRet.EngRetTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.NcmHoleMachiningEngRet.EngRetTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.NcmLaserEngage.Type
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.NcmLaserEngage.Type
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.NcmLaserRetract.Type
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.NcmLaserRetract.Type
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.NcmPlanarBuilder.CutcomTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.NcmPlanarBuilder.CutcomTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.NcmPlanarBuilder.FinalRet
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.NcmPlanarBuilder.FinalRet
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.NcmPlanarBuilder.FinalTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.NcmPlanarBuilder.FinalTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.NcmPlanarBuilder.InitialEng
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.NcmPlanarBuilder.InitialEng
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.NcmPlanarBuilder.InitialTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.NcmPlanarBuilder.InitialTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.NcmPlanarBuilder.PredrillPointsOutputOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.NcmPlanarBuilder.PredrillPointsOutputOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.NcmPlanarBuilder.TransferBetweenLevelsTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.NcmPlanarBuilder.TransferBetweenLevelsTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.NcmPlanarBuilder.TransferBetweenRegionsTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.NcmPlanarBuilder.TransferBetweenRegionsTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.NcmPlanarBuilder.TransferWithinLevelsTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.NcmPlanarBuilder.TransferWithinLevelsTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.NcmPlanarBuilder.TransferWithinLevelsWiths
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.NcmPlanarBuilder.TransferWithinLevelsWiths
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.NcmPlanarEngRetBuilder.EngRetTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.NcmPlanarEngRetBuilder.EngRetTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.NcmPlanarEngRetBuilder.MeasureHeightFrom
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.NcmPlanarEngRetBuilder.MeasureHeightFrom
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.NcmScBuilder.SmoothingOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.NcmScBuilder.SmoothingOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.NcmScEngRetBuilder.EngRetTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.NcmScEngRetBuilder.EngRetTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.NcmScEngRetBuilder.MeasureFromTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.NcmScEngRetBuilder.MeasureFromTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.NcmSmoothingBuilder.SmoothToleranceSources
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.NcmSmoothingBuilder.SmoothToleranceSources
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.NcmSubopBuilder.DefaultRegionStartTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.NcmSubopBuilder.DefaultRegionStartTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.NcmTransfer.TransferTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.NcmTransfer.TransferTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.NcmTransferBuilder.AppDepMethodTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.NcmTransferBuilder.AppDepMethodTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.NcmTransferBuilder.AppDepToolAxisOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.NcmTransferBuilder.AppDepToolAxisOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.NcmTransferBuilder.LongMotionTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.NcmTransferBuilder.LongMotionTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.NcmTransferBuilder.TraverseTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.NcmTransferBuilder.TraverseTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.NcmTurnThreadBuilder.LocalReturnMainModes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.NcmTurnThreadBuilder.LocalReturnMainModes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.NcmTurnThreadBuilder.LocalReturnModes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.NcmTurnThreadBuilder.LocalReturnModes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.NcmTurnThreadBuilder.LocalReturnTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.NcmTurnThreadBuilder.LocalReturnTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.NcmWedmBuilder.CutcomOffTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.NcmWedmBuilder.CutcomOffTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.NcmWedmBuilder.CutcomOnTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.NcmWedmBuilder.CutcomOnTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.NcmWedmBuilder.GlobalStopPointMethodTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.NcmWedmBuilder.GlobalStopPointMethodTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.NcmWedmBuilder.GlobalStopPointTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.NcmWedmBuilder.GlobalStopPointTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.NcmWedmBuilder.LeadInMethodTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.NcmWedmBuilder.LeadInMethodTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.NcmWedmBuilder.LeadOutMethodTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.NcmWedmBuilder.LeadOutMethodTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.NcmWedmBuilder.LeadOutSameAsLeadInTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.NcmWedmBuilder.LeadOutSameAsLeadInTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.NcmWedmBuilder.NonTiltLeadInTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.NcmWedmBuilder.NonTiltLeadInTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.NormalToToolAxisMoveBuilder.Orientation
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.NormalToToolAxisMoveBuilder.Orientation
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.OffsetDataBuilder.OffsetDirectionMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.OffsetDataBuilder.OffsetDirectionMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.OperationBuilder.HoleAxisTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.OperationBuilder.HoleAxisTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.OperationBuilder.HoleDepthTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.OperationBuilder.HoleDepthTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.OperationBuilder.OptimizationBasedOnTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.OperationBuilder.OptimizationBasedOnTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.OperationBuilder.OptimizationDistanceTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.OperationBuilder.OptimizationDistanceTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.OperationBuilder.OptimizationLevelTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.OperationBuilder.OptimizationLevelTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.OperationCollection.UseDefaultName
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.OperationCollection.UseDefaultName
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.OperationDisplayOptionsBuilder.PathDisplayTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.OperationDisplayOptionsBuilder.PathDisplayTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.OperationDisplayOptionsBuilder.PathNormalTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.OperationDisplayOptionsBuilder.PathNormalTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.OperationDisplayOptionsBuilder.PatternDisplayTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.OperationDisplayOptionsBuilder.PatternDisplayTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.OperationDisplayOptionsBuilder.ToolDisplayTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.OperationDisplayOptionsBuilder.ToolDisplayTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.OperationTransformBuilder.Angle
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.OperationTransformBuilder.Angle
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.OperationTransformBuilder.Line
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.OperationTransformBuilder.Line
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.OperationTransformBuilder.Motion
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.OperationTransformBuilder.Motion
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.OperationTransformBuilder.Result
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.OperationTransformBuilder.Result
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.OperationTransformBuilder.Transform
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.OperationTransformBuilder.Transform
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.OrientGeomBuilder.CsysPurposeModes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.OrientGeomBuilder.CsysPurposeModes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.OrientGeomBuilder.SpecialOutputModes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.OrientGeomBuilder.SpecialOutputModes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.OrientGeomBuilder.ToolAxisModes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.OrientGeomBuilder.ToolAxisModes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.ParamBuilder.OptimizationTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.ParamBuilder.OptimizationTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.ParamValueIntent
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.ParamValueIntent
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.PartAxisBuilder.PartAxisOfRotationTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.PartAxisBuilder.PartAxisOfRotationTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.PitchSetting.OptionTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.PitchSetting.OptionTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.PitchSetting.OutputUnitTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.PitchSetting.OutputUnitTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.PitchSetting.VarianceTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.PitchSetting.VarianceTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.PlanarOperationBuilder.AutomaticPartBoundaryMethodTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.PlanarOperationBuilder.AutomaticPartBoundaryMethodTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.PlungeMillingBuilder.TransferMethodTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.PlungeMillingBuilder.TransferMethodTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.PmopToolAxisCiBuilder.ToolAxisTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.PmopToolAxisCiBuilder.ToolAxisTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.Preferences.AnimationAccuracyTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.Preferences.AnimationAccuracyTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.Preferences.AuxiliaryFloorColorSelectionTypes
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.Preferences.AuxiliaryFloorColorSelectionTypes
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.Preferences.BlankSelectionTypes
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.Preferences.BlankSelectionTypes
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.Preferences.CheckSelectionTypes
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.Preferences.CheckSelectionTypes
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.Preferences.CsysInformationListingTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.Preferences.CsysInformationListingTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.Preferences.CutAreaSelectionTypes
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.Preferences.CutAreaSelectionTypes
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.Preferences.GeometryTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.Preferences.GeometryTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.Preferences.IpwDmrColoringTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.Preferences.IpwDmrColoringTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.Preferences.PartSelectionTypes
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.Preferences.PartSelectionTypes
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.Preferences.SelectionTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.Preferences.SelectionTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.Preferences.WallSelectionTypes
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.Preferences.WallSelectionTypes
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.ProbeCalibrateSphereMoveBuilder.Geometry
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.ProbeCalibrateSphereMoveBuilder.Geometry
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.ProbeCalibrateStylusMoveBuilder.CalibrateStylusType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.ProbeCalibrateStylusMoveBuilder.CalibrateStylusType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.ProbeCalibrateStylusMoveBuilder.Depth
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.ProbeCalibrateStylusMoveBuilder.Depth
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.ProbeCalibrateStylusMoveBuilder.Geometry
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.ProbeCalibrateStylusMoveBuilder.Geometry
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.ProbeControlParametersBuilder.AdjustmentTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.ProbeControlParametersBuilder.AdjustmentTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.ProbeControlParametersBuilder.PrintType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.ProbeControlParametersBuilder.PrintType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.ProbeInspectBorebossMoveBuilder.Angle
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.ProbeInspectBorebossMoveBuilder.Angle
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.ProbeInspectBorebossMoveBuilder.Cycle
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.ProbeInspectBorebossMoveBuilder.Cycle
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.ProbeInspectBorebossMoveBuilder.Depth
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.ProbeInspectBorebossMoveBuilder.Depth
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.ProbeInspectBorebossMoveBuilder.Geometry
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.ProbeInspectBorebossMoveBuilder.Geometry
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.ProbeInspectPointMoveBuilder.Direction
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.ProbeInspectPointMoveBuilder.Direction
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.ProbeInspectSurfacePointMoveBuilder.Direction
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.ProbeInspectSurfacePointMoveBuilder.Direction
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.ProbeInspectSurfacePointMoveBuilder.Measurement
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.ProbeInspectSurfacePointMoveBuilder.Measurement
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.ProbeInspectSurfacePointMoveBuilder.ToolAxis
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.ProbeInspectSurfacePointMoveBuilder.ToolAxis
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.ProbeProtectedParametersBuilder.AppMethodTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.ProbeProtectedParametersBuilder.AppMethodTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.ProbeProtectedParametersBuilder.CollisionFlagTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.ProbeProtectedParametersBuilder.CollisionFlagTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.ProbeProtectedParametersBuilder.DepMethodTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.ProbeProtectedParametersBuilder.DepMethodTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.ProfileStrategy.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.ProfileStrategy.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.ProjVecCiBuilder.DpmProjTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.ProjVecCiBuilder.DpmProjTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.RampingMode.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.RampingMode.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.ReliefCut.DepthUnits
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.ReliefCut.DepthUnits
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.ReliefCut.DistanceUnits
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.ReliefCut.DistanceUnits
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.ReliefCut.Modes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.ReliefCut.Modes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.ReliefPlunge.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.ReliefPlunge.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.ReliefPlunge.UnitTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.ReliefPlunge.UnitTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.RotaryFinishGeomBuilder.PartAxisOfRotationTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.RotaryFinishGeomBuilder.PartAxisOfRotationTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.RotaryPolarMoveBuilder.LockAxisDirection
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.RotaryPolarMoveBuilder.LockAxisDirection
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.RotaryPolarMoveBuilder.LockPlaneType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.RotaryPolarMoveBuilder.LockPlaneType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.RoughFinishTurningBuilder.CustomMemberDataTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.RoughFinishTurningBuilder.CustomMemberDataTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.RoughFinishTurningBuilder.CutRegionsTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.RoughFinishTurningBuilder.CutRegionsTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.RoughFinishTurningBuilder.ExtendModeTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.RoughFinishTurningBuilder.ExtendModeTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.RoughFinishTurningBuilder.MaximumAreaModes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.RoughFinishTurningBuilder.MaximumAreaModes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.RoughFinishTurningBuilder.MinimumAreaTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.RoughFinishTurningBuilder.MinimumAreaTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.RoughFinishTurningBuilder.MinmaxAreaUnits
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.RoughFinishTurningBuilder.MinmaxAreaUnits
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.RoughFinishTurningBuilder.MinmaxSizeModes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.RoughFinishTurningBuilder.MinmaxSizeModes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.RoughFinishTurningBuilder.MinmaxSizeUnits
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.RoughFinishTurningBuilder.MinmaxSizeUnits
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.RoughFinishTurningBuilder.RegionMachiningTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.RoughFinishTurningBuilder.RegionMachiningTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.RoughFinishTurningBuilder.RegionSelectionTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.RoughFinishTurningBuilder.RegionSelectionTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.RoughFinishTurningBuilder.ToleranceOffsetTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.RoughFinishTurningBuilder.ToleranceOffsetTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.RoughTurningBuilder.CleanupTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.RoughTurningBuilder.CleanupTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.RoughTurningBuilder.LevelDepthModeTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.RoughTurningBuilder.LevelDepthModeTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.RoughTurningBuilder.PartOffDepthModeTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.RoughTurningBuilder.PartOffDepthModeTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.RoughTurningBuilder.PartOffPositionModeTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.RoughTurningBuilder.PartOffPositionModeTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.RoughTurningBuilder.ReversalModeTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.RoughTurningBuilder.ReversalModeTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.RoundPointBuilder.Output
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.RoundPointBuilder.Output
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.Sequence.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.Sequence.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.SimulationOptionsBuilder.Accuracy
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.SimulationOptionsBuilder.Accuracy
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.SimulationOptionsBuilder.DialogType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.SimulationOptionsBuilder.DialogType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.SimulationOptionsBuilder.Enable
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.SimulationOptionsBuilder.Enable
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.SimulationOptionsBuilder.IpwEnable
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.SimulationOptionsBuilder.IpwEnable
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.SimulationOptionsBuilder.Resolution
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.SimulationOptionsBuilder.Resolution
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.SimulationOptionsBuilder.Stationary
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.SimulationOptionsBuilder.Stationary
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.SimulationOptionsBuilder.StockType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.SimulationOptionsBuilder.StockType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.SimulationOptionsBuilder.ToolShapeColl
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.SimulationOptionsBuilder.ToolShapeColl
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.SimulationOptionsBuilder.ToolShapeMR
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.SimulationOptionsBuilder.ToolShapeMR
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.SmallAreaAvoidance.StatusTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.SmallAreaAvoidance.StatusTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.SplitSubopCommand.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.SplitSubopCommand.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.SpringPasses.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.SpringPasses.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.SpunOutlineGeom.CreationTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.SpunOutlineGeom.CreationTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.SteepContainment.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.SteepContainment.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.StepoverBuilder.ApplyTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.StepoverBuilder.ApplyTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.StepoverBuilder.StepoverTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.StepoverBuilder.StepoverTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.StopPosition.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.StopPosition.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.SurfaceContourBuilder.AccessVectorMethodType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.SurfaceContourBuilder.AccessVectorMethodType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.SurfaceContourBuilder.CleanupTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.SurfaceContourBuilder.CleanupTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.SurfaceContourBuilder.DriveMethodTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.SurfaceContourBuilder.DriveMethodTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.SurfaceRegions.CreateRegionsTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.SurfaceRegions.CreateRegionsTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.SurfaceRegions.FeatureTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.SurfaceRegions.FeatureTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.TabPointDataBuilder.TabMethodType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.TabPointDataBuilder.TabMethodType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.TabPointDataBuilder.TabThreadMethodType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.TabPointDataBuilder.TabThreadMethodType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.TeachmodeLinearMoveBuilder.CurveToolPositionTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.TeachmodeLinearMoveBuilder.CurveToolPositionTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.TeachmodeLinearMoveBuilder.EndPositionTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.TeachmodeLinearMoveBuilder.EndPositionTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.TeachmodeLinearMoveBuilder.InitialRetractTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.TeachmodeLinearMoveBuilder.InitialRetractTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.TeachmodeLinearMoveBuilder.MoveTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.TeachmodeLinearMoveBuilder.MoveTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.TeachmodeProfileMoveBuilder.DriveGeometryTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.TeachmodeProfileMoveBuilder.DriveGeometryTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.TeachmodeProfileMoveBuilder.StartStopPositionMethods
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.TeachmodeProfileMoveBuilder.StartStopPositionMethods
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.ThreadMillingCutParameters.CutDirectionTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.ThreadMillingCutParameters.CutDirectionTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.ThreadToolBuilder.InsertShapes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.ThreadToolBuilder.InsertShapes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.ThreadTurningBuilder.DepthOptionTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.ThreadTurningBuilder.DepthOptionTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.ThreadTurningBuilder.InfeedLengthTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.ThreadTurningBuilder.InfeedLengthTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.ThreadTurningBuilder.InfeedModes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.ThreadTurningBuilder.InfeedModes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.Tool.Subtypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.Tool.Subtypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.Tool.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.Tool.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.ToolAxisAdvanced.RotateAboutType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.ToolAxisAdvanced.RotateAboutType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.ToolAxisAdvanced.Type
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.ToolAxisAdvanced.Type
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.ToolAxisChange.MethodTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.ToolAxisChange.MethodTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.ToolAxisFixed.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.ToolAxisFixed.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.ToolAxisInterpolate.InterpolateTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.ToolAxisInterpolate.InterpolateTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.ToolAxisInterpolate.InterpolationMethodTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.ToolAxisInterpolate.InterpolationMethodTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.ToolAxisTilt.TiltAngleTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.ToolAxisTilt.TiltAngleTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.ToolAxisTilt.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.ToolAxisTilt.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.ToolAxisVariable.MaximumLeadAngleTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.ToolAxisVariable.MaximumLeadAngleTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.ToolAxisVariable.NominalLeadAngleTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.ToolAxisVariable.NominalLeadAngleTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.ToolAxisVariable.RulingTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.ToolAxisVariable.RulingTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.ToolAxisVariable.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.ToolAxisVariable.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.ToolChangeCiBuilder.HeadDesignationTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.ToolChangeCiBuilder.HeadDesignationTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.ToolPathDivideBuilder.PathDivideType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.ToolPathDivideBuilder.PathDivideType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.ToolPathEditorBuilder.ClearanceMethodType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.ToolPathEditorBuilder.ClearanceMethodType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.ToolPathEditorBuilder.ConnectionMethodType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.ToolPathEditorBuilder.ConnectionMethodType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.ToolPathEditorBuilder.ExtendMethodType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.ToolPathEditorBuilder.ExtendMethodType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.ToolPathEditorBuilder.MotionMethodType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.ToolPathEditorBuilder.MotionMethodType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.ToolPathEditorBuilder.TrimGeometryType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.ToolPathEditorBuilder.TrimGeometryType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.ToolPathEditorBuilder.TrimSideType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.ToolPathEditorBuilder.TrimSideType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.ToolPathSplitBuilder.SplitTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.ToolPathSplitBuilder.SplitTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.ToolPathSplitBuilder.TransferTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.ToolPathSplitBuilder.TransferTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.ToolPathSplitBuilder.TransferUsingMethods
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.ToolPathSplitBuilder.TransferUsingMethods
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.ToolPathSplitParametersBuilder.SplitTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.ToolPathSplitParametersBuilder.SplitTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.ToolPathSplitParametersBuilder.TransferTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.ToolPathSplitParametersBuilder.TransferTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.ToolPathSplitParametersBuilder.TransferUsingMethods
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.ToolPathSplitParametersBuilder.TransferUsingMethods
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.ToolPathTiltAvoidance.AxisType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.ToolPathTiltAvoidance.AxisType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.ToolPathTiltAvoidance.MethodType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.ToolPathTiltAvoidance.MethodType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.ToolPathTiltMachine.ToolMainMcsTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.ToolPathTiltMachine.ToolMainMcsTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.ToolPathTiltTilting.AxisType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.ToolPathTiltTilting.AxisType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.ToolPathTiltTilting.ManualTiltTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.ToolPathTiltTilting.ManualTiltTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.ToolPathTiltTilting.ReferenceTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.ToolPathTiltTilting.ReferenceTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.ToolPathTiltTilting.ToolAxisTiltingDistTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.ToolPathTiltTilting.ToolAxisTiltingDistTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.ToolPathTiltTilting.ToolAxisTiltingRuleTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.ToolPathTiltTilting.ToolAxisTiltingRuleTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.ToolPathTiltTilting.ToolAxisTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.ToolPathTiltTilting.ToolAxisTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.ToolPositioningBuilder.ToolPositioning
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.ToolPositioningBuilder.ToolPositioning
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.TrimPlane.Content
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.TrimPlane.Content
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.TrimPlane.LimitOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.TrimPlane.LimitOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.TrimPoint.AngleOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.TrimPoint.AngleOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.TrimPoint.Options
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.TrimPoint.Options
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.TrimPoint.RampAngleOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.TrimPoint.RampAngleOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.TurnAvoidanceApproachBuilder.ApproachPathModes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.TurnAvoidanceApproachBuilder.ApproachPathModes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.TurnAvoidanceClearanceBuilder.AxialPlaneModes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.TurnAvoidanceClearanceBuilder.AxialPlaneModes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.TurnAvoidanceClearanceBuilder.RadialPlaneModes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.TurnAvoidanceClearanceBuilder.RadialPlaneModes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.TurnAvoidanceDepartureBuilder.DeparturePathModes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.TurnAvoidanceDepartureBuilder.DeparturePathModes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.TurnAvoidanceFromBuilder.FromPointModes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.TurnAvoidanceFromBuilder.FromPointModes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.TurnAvoidanceGohomeBuilder.GohomePointModes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.TurnAvoidanceGohomeBuilder.GohomePointModes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.TurnAvoidanceGohomeBuilder.GohomePointMotionTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.TurnAvoidanceGohomeBuilder.GohomePointMotionTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.TurnAvoidancePathPointsBuilder.CsTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.TurnAvoidancePathPointsBuilder.CsTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.TurnAvoidancePathPointsBuilder.CustomFeedrateUnitTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.TurnAvoidancePathPointsBuilder.CustomFeedrateUnitTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.TurnAvoidancePathPointsBuilder.FeedrateModesTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.TurnAvoidancePathPointsBuilder.FeedrateModesTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.TurnAvoidancePathPointsBuilder.MotionTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.TurnAvoidancePathPointsBuilder.MotionTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.TurnAvoidancePathPointsBuilder.PointStatus
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.TurnAvoidancePathPointsBuilder.PointStatus
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.TurnAvoidanceReturnBuilder.ReturnPointModes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.TurnAvoidanceReturnBuilder.ReturnPointModes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.TurnAvoidanceReturnBuilder.ReturnPointMotionTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.TurnAvoidanceReturnBuilder.ReturnPointMotionTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.TurnAvoidanceStartBuilder.StartPointModes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.TurnAvoidanceStartBuilder.StartPointModes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.TurnAvoidanceStartBuilder.StartPointMotionTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.TurnAvoidanceStartBuilder.StartPointMotionTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.TurnAvoidanceStartOfEngageBuilder.StartOfEngageMotionTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.TurnAvoidanceStartOfEngageBuilder.StartOfEngageMotionTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.TurnConcaveCornerControl.RadiusOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.TurnConcaveCornerControl.RadiusOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.TurnConcaveCornerControl.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.TurnConcaveCornerControl.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.TurnCornerControl.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.TurnCornerControl.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.TurnEngageRetractBuilder.AutoOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.TurnEngageRetractBuilder.AutoOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.TurnEngageRetractBuilder.ExtendMethods
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.TurnEngageRetractBuilder.ExtendMethods
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.TurnEngageRetractBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.TurnEngageRetractBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.TurnFeatureGeomBuilder.CutRegionSelectionModes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.TurnFeatureGeomBuilder.CutRegionSelectionModes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.TurnFeatureGeomBuilder.SurfaceSensitivityModes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.TurnFeatureGeomBuilder.SurfaceSensitivityModes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.TurnFeatureGeomBuilder.ToleranceOffsetModes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.TurnFeatureGeomBuilder.ToleranceOffsetModes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.TurnGrooveCornerControl.CornerTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.TurnGrooveCornerControl.CornerTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.TurnGrooveCornerControl.CutSequenceTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.TurnGrooveCornerControl.CutSequenceTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.TurnGrooveCornerControl.ReliefPlungeTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.TurnGrooveCornerControl.ReliefPlungeTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.TurningOperationBuilder.MotionOutputOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.TurningOperationBuilder.MotionOutputOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.TurningOperationBuilder.TrackingPointType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.TurningOperationBuilder.TrackingPointType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.TurningToolBuilder.HolderShankTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.TurningToolBuilder.HolderShankTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.TurningToolBuilder.InsertPositions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.TurningToolBuilder.InsertPositions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.TurnMoveToPointBuilder.DirectionTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.TurnMoveToPointBuilder.DirectionTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.TurnOrientGeomBuilder.LatheWorkPlaneTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.TurnOrientGeomBuilder.LatheWorkPlaneTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.TurnOrientWcs.XcMappingTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.TurnOrientWcs.XcMappingTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.TurnOrientWcs.YcMappingTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.TurnOrientWcs.YcMappingTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.TurnOverlap.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.TurnOverlap.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.TurnProbeClearanceBuilder.AxialPlaneModes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.TurnProbeClearanceBuilder.AxialPlaneModes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.TurnProbeClearanceBuilder.RadialPlaneModes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.TurnProbeClearanceBuilder.RadialPlaneModes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.TurnProbeInspectPointMoveBuilder.DirectionTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.TurnProbeInspectPointMoveBuilder.DirectionTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.TurnRoughFinishLocalReturnBuilder.AdjustmentModeTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.TurnRoughFinishLocalReturnBuilder.AdjustmentModeTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.TurnRoughFinishLocalReturnBuilder.DwellUnitTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.TurnRoughFinishLocalReturnBuilder.DwellUnitTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.TurnRoughFinishLocalReturnBuilder.LimitTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.TurnRoughFinishLocalReturnBuilder.LimitTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.TurnRoughFinishLocalReturnBuilder.ModeTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.TurnRoughFinishLocalReturnBuilder.ModeTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.TurnRoughFinishLocalReturnBuilder.ReturnMoveModeTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.TurnRoughFinishLocalReturnBuilder.ReturnMoveModeTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.TurnRoughFinishTestCut.CutTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.TurnRoughFinishTestCut.CutTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.TurnRoughFinishTestCut.DirectionTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.TurnRoughFinishTestCut.DirectionTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.TurnRoughFinishTestCut.FeedInTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.TurnRoughFinishTestCut.FeedInTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.TurnRoughFinishTestCut.FeedOutTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.TurnRoughFinishTestCut.FeedOutTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.TurnRoughFinishTestCut.MeasuringPositionTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.TurnRoughFinishTestCut.MeasuringPositionTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.TurnRoughFinishTestCut.ReturnMoveTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.TurnRoughFinishTestCut.ReturnMoveTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.TurnRoughFinishTestCut.SecondarySequenceTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.TurnRoughFinishTestCut.SecondarySequenceTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.TurnRoughFinishTestCut.SequenceTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.TurnRoughFinishTestCut.SequenceTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.TurnRoughFinishTestCut.StockModeTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.TurnRoughFinishTestCut.StockModeTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.TurnRoughFinishTestCut.StopPositionTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.TurnRoughFinishTestCut.StopPositionTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.TurnThreadEngageRetractBuilder.EngageRetractTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.TurnThreadEngageRetractBuilder.EngageRetractTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.TurnThreadEngageRetractBuilder.MoveTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.TurnThreadEngageRetractBuilder.MoveTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.TurnToolBuilder.HolderHands
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.TurnToolBuilder.HolderHands
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.TurnToolBuilder.HolderStyles
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.TurnToolBuilder.HolderStyles
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.TurnToolBuilder.InsertShapes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.TurnToolBuilder.InsertShapes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.TurnToolBuilder.ReliefAngleTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.TurnToolBuilder.ReliefAngleTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.TurnToolBuilder.SizeOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.TurnToolBuilder.SizeOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.TurnToolBuilder.ThicknessTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.TurnToolBuilder.ThicknessTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.TurnToolProbingBuilder.TrackingPointTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.TurnToolProbingBuilder.TrackingPointTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.VectorDistanceMoveBuilder.EndType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.VectorDistanceMoveBuilder.EndType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.VerticalPosition.OffsetTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.VerticalPosition.OffsetTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.WedmArcOutputTypeCiBuilder.OutputTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.WedmArcOutputTypeCiBuilder.OutputTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.WedmCutOrderBuilder.Type
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.WedmCutOrderBuilder.Type
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.WedmCutParameters.CutDirectionTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.WedmCutParameters.CutDirectionTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.WedmCutParameters.WirePositionTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.WedmCutParameters.WirePositionTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.WedmGeomBuilder.BackburnPassesTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.WedmGeomBuilder.BackburnPassesTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.WedmGeomBuilder.ConvexCornerTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.WedmGeomBuilder.ConvexCornerTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.WedmGeomBuilder.CornerSmoothingType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.WedmGeomBuilder.CornerSmoothingType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.WedmGeomBuilder.SmoothLeadInTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.WedmGeomBuilder.SmoothLeadInTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.WedmGeomBuilder.SmoothLeadOutTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.WedmGeomBuilder.SmoothLeadOutTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.WedmGeomBuilder.StopPointFlagTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.WedmGeomBuilder.StopPointFlagTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.WedmGeomBuilder.StopPointTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.WedmGeomBuilder.StopPointTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.WedmOperationBuilder.BackburnPassesTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.WedmOperationBuilder.BackburnPassesTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.WedmOperationBuilder.ConvexCornerTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.WedmOperationBuilder.ConvexCornerTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.WedmOperationBuilder.CornerSmoothingType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.WedmOperationBuilder.CornerSmoothingType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.WedmOperationBuilder.InPathUdeSetTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.WedmOperationBuilder.InPathUdeSetTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.WedmOperationBuilder.SmoothLeadInTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.WedmOperationBuilder.SmoothLeadInTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.WedmOperationBuilder.SmoothLeadOutTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.WedmOperationBuilder.SmoothLeadOutTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.WedmOperationBuilder.StopPointFlagTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.WedmOperationBuilder.StopPointFlagTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.WedmOperationBuilder.StopPointTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.WedmOperationBuilder.StopPointTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.WedmPointDefinitionBuilder.PointStates
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.WedmPointDefinitionBuilder.PointStates
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.WedmPointDefinitionBuilder.WireAxisStates
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.WedmPointDefinitionBuilder.WireAxisStates
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.WedmStatusControlCiBuilder.StatusTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.WedmStatusControlCiBuilder.StatusTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.cam.ZAxisSmoothing.Options
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.cam.ZAxisSmoothing.Options
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.Catiav4Creator.SolidBodyOutputOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.Catiav4Creator.SolidBodyOutputOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.Catiav5Creator.ExportFromOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.Catiav5Creator.ExportFromOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.CGMBuilder.ActionOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.CGMBuilder.ActionOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.CGMBuilder.Color
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.CGMBuilder.Color
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.CGMBuilder.ImageResolutionOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.CGMBuilder.ImageResolutionOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.CGMBuilder.MultipleOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.CGMBuilder.MultipleOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.CGMBuilder.OutputTextOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.CGMBuilder.OutputTextOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.CGMBuilder.RelationOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.CGMBuilder.RelationOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.CGMBuilder.SizeOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.CGMBuilder.SizeOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.CGMBuilder.UnitsOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.CGMBuilder.UnitsOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.CGMBuilder.Vdc
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.CGMBuilder.Vdc
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.CGMBuilder.Width
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.CGMBuilder.Width
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.ConvertToFromReferenceBuilder.OutputType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.ConvertToFromReferenceBuilder.OutputType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.CurveParameterType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.CurveParameterType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.DateItemBuilder.DayOfMonth
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.DateItemBuilder.DayOfMonth
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.DateItemBuilder.MonthOfYear
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.DateItemBuilder.MonthOfYear
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.DatumConstraint.CurveOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.DatumConstraint.CurveOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.DatumConstraint.Solution
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.DatumConstraint.Solution
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.DatumConstraint.Type
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.DatumConstraint.Type
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.die.AddendumSectionBuilder.SectionLocationType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.die.AddendumSectionBuilder.SectionLocationType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.die.AddendumSectionBuilder.SectionOrientationType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.die.AddendumSectionBuilder.SectionOrientationType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.die.AddendumSectionBuilder.SectionShapeType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.die.AddendumSectionBuilder.SectionShapeType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.die.AddendumSectionBuilder.SegmentParameterType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.die.AddendumSectionBuilder.SegmentParameterType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.die.AddendumSectionBuilder.SegmentType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.die.AddendumSectionBuilder.SegmentType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.die.AddendumSectionBuilder.SurfaceBuildType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.die.AddendumSectionBuilder.SurfaceBuildType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.die.AddSurfBuilder.Methods
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.die.AddSurfBuilder.Methods
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.die.ClampingSlotBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.die.ClampingSlotBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.die.ClearanceBuilder.ClearanceGeometryTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.die.ClearanceBuilder.ClearanceGeometryTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.die.ClearanceBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.die.ClearanceBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.die.CompensateRoughDataBuilder.ApproximationType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.die.CompensateRoughDataBuilder.ApproximationType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.die.CompensateRoughDataBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.die.CompensateRoughDataBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.die.DieAssistantFlangeProfileType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.die.DieAssistantFlangeProfileType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.die.DieBooleanBuilder.BooleanType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.die.DieBooleanBuilder.BooleanType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.die.DieBuildStatusOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.die.DieBuildStatusOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.die.DieDirectionBuilder.DirectionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.die.DieDirectionBuilder.DirectionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.die.DiePlaneBuilder.PlaneType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.die.DiePlaneBuilder.PlaneType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.die.DirectionOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.die.DirectionOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.die.DrawBeadBuilder.FemaleDepthTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.die.DrawBeadBuilder.FemaleDepthTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.die.DrawBeadBuilder.FemaleWidthTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.die.DrawBeadBuilder.FemaleWidthTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.die.DrawBeadBuilder.MaleBeadPositionTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.die.DrawBeadBuilder.MaleBeadPositionTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.die.DrawBeadBuilder.OrientationTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.die.DrawBeadBuilder.OrientationTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.die.DrawBeadBuilder.OrientSectionToDrawTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.die.DrawBeadBuilder.OrientSectionToDrawTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.die.DrawBeadBuilder.OutputTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.die.DrawBeadBuilder.OutputTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.die.DrawBeadBuilder.ProjectionDirectionTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.die.DrawBeadBuilder.ProjectionDirectionTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.die.DrawBeadBuilder.TransitionDefinitionTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.die.DrawBeadBuilder.TransitionDefinitionTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.die.DrawBeadSegmentBuilder.MaleBeadWidthTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.die.DrawBeadSegmentBuilder.MaleBeadWidthTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.die.DrawBeadTaperBuilder.TaperTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.die.DrawBeadTaperBuilder.TaperTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.die.FillAreaBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.die.FillAreaBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.die.FillAreaBuilder.UpperLimitTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.die.FillAreaBuilder.UpperLimitTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.die.FingerClearanceNotchBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.die.FingerClearanceNotchBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.die.FlangeTaskBuilder.CamTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.die.FlangeTaskBuilder.CamTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.die.FlangeTaskBuilder.PierceTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.die.FlangeTaskBuilder.PierceTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.die.FlangeTaskBuilder.SpringbackTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.die.FlangeTaskBuilder.SpringbackTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.die.HandlingCoreBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.die.HandlingCoreBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.die.HeelpostBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.die.HeelpostBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.die.KeywayBuilder.LocationType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.die.KeywayBuilder.LocationType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.die.KeywayBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.die.KeywayBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.die.KeywayChildBuilder.LocationOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.die.KeywayChildBuilder.LocationOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.die.KeywayChildBuilder.RunoffTypeOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.die.KeywayChildBuilder.RunoffTypeOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.die.KeywayParentBuilder.RunoffTypeOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.die.KeywayParentBuilder.RunoffTypeOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.die.MachineReliefBuilder.MainProfileTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.die.MachineReliefBuilder.MainProfileTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.die.MachineReliefBuilder.TrimSheetTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.die.MachineReliefBuilder.TrimSheetTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.die.MachineReliefBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.die.MachineReliefBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.die.OutputCurvesBuilder.SmoothTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.die.OutputCurvesBuilder.SmoothTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.die.OutputCurvesBuilder.TrimCurveCreateTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.die.OutputCurvesBuilder.TrimCurveCreateTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.die.OutputCurvesBuilder.TrimCurveTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.die.OutputCurvesBuilder.TrimCurveTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.die.OutputCurvesBuilder.TrimOutputCurveTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.die.OutputCurvesBuilder.TrimOutputCurveTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.die.PadChildBuilder.ShapeTypeOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.die.PadChildBuilder.ShapeTypeOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.die.PadParentBuilder.ShapeTypeOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.die.PadParentBuilder.ShapeTypeOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.die.PierceHoleChildBuilder.ShapeTypeOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.die.PierceHoleChildBuilder.ShapeTypeOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.die.PierceItemBuilder.HoleShapeType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.die.PierceItemBuilder.HoleShapeType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.die.PierceItemBuilder.SizingMethodOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.die.PierceItemBuilder.SizingMethodOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.die.PierceTaskBuilder.CamTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.die.PierceTaskBuilder.CamTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.die.PierceTaskBuilder.CenterPointOptionTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.die.PierceTaskBuilder.CenterPointOptionTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.die.PierceTaskBuilder.PrecisionTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.die.PierceTaskBuilder.PrecisionTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.die.QuickBinderBuilder.EditTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.die.QuickBinderBuilder.EditTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.die.QuickBinderBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.die.QuickBinderBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.die.QuickBinderWrapBuilder.EditSizeType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.die.QuickBinderWrapBuilder.EditSizeType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.die.QuickBinderWrapBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.die.QuickBinderWrapBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.die.SpringbackCompensationBuilder.DefinedByType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.die.SpringbackCompensationBuilder.DefinedByType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.die.SpringbackCompensationBuilder.DegreeType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.die.SpringbackCompensationBuilder.DegreeType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.die.SpringbackCompensationBuilder.ResultSheetType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.die.SpringbackCompensationBuilder.ResultSheetType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.die.SteelInsertBuilder.InsertTypeOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.die.SteelInsertBuilder.InsertTypeOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.die.SteelInsertSectionBuilder.ExtensionTypeOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.die.SteelInsertSectionBuilder.ExtensionTypeOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.die.SteelInsertSegmentChildBuilder.ExtensionTypeOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.die.SteelInsertSegmentChildBuilder.ExtensionTypeOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.die.SteelInsertSegmentChildBuilder.InsertTypeOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.die.SteelInsertSegmentChildBuilder.InsertTypeOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.die.SteelInsertSegmentParentBuilder.ExtensionTypeOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.die.SteelInsertSegmentParentBuilder.ExtensionTypeOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.die.SteelInsertSegmentParentBuilder.InsertTypeOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.die.SteelInsertSegmentParentBuilder.InsertTypeOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.die.ThroatChildBuilder.TypeOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.die.ThroatChildBuilder.TypeOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.die.ThroatParentBuilder.TypeOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.die.ThroatParentBuilder.TypeOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.die.TrimLineDevelopmentBuilder.Convergency
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.die.TrimLineDevelopmentBuilder.Convergency
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.die.TrimLineDevelopmentBuilder.MaterialTypeName
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.die.TrimLineDevelopmentBuilder.MaterialTypeName
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.die.TrimLineDevelopmentBuilder.MeshElement
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.die.TrimLineDevelopmentBuilder.MeshElement
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.die.TrimLineDevelopmentBuilder.OutputMethodName
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.die.TrimLineDevelopmentBuilder.OutputMethodName
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.die.TrimLineDevelopmentBuilder.SmoothingName
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.die.TrimLineDevelopmentBuilder.SmoothingName
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.die.TrimLineDevelopmentBuilder.Surface
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.die.TrimLineDevelopmentBuilder.Surface
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.die.TrimTaskBuilder.CamTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.die.TrimTaskBuilder.CamTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.die.TrimTaskBuilder.MatchCutTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.die.TrimTaskBuilder.MatchCutTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.die.UncutRegionsBuilder.ResultsType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.die.UncutRegionsBuilder.ResultsType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.die.WearPlateLocChildBuilder.PositionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.die.WearPlateLocChildBuilder.PositionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.die.WearPlateLocParentBuilder.PositionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.die.WearPlateLocParentBuilder.PositionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.Background.Type
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.Background.Type
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.BoundedGridBuilder.LabelReferenceType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.BoundedGridBuilder.LabelReferenceType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.BoundedGridBuilder.ShowLabelType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.BoundedGridBuilder.ShowLabelType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.CameraBuilder.Aperture
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.CameraBuilder.Aperture
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.CameraBuilder.FovMeasured
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.CameraBuilder.FovMeasured
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.CameraBuilder.LensAngle
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.CameraBuilder.LensAngle
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.CameraBuilder.LensFlare
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.CameraBuilder.LensFlare
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.CameraBuilder.StockLens
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.CameraBuilder.StockLens
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.CameraBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.CameraBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.CgfxMattexBuilder.Technique
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.CgfxMattexBuilder.Technique
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.CgfxMattexBuilder.TextureSpace
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.CgfxMattexBuilder.TextureSpace
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.CgfxMattexBuilder.TextureSpaceShader
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.CgfxMattexBuilder.TextureSpaceShader
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.CgfxMattexBuilder.UseCameraDirectionPlane
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.CgfxMattexBuilder.UseCameraDirectionPlane
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.DatumPlaneGridBuilder.GridOrientationType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.DatumPlaneGridBuilder.GridOrientationType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.DecalBuilder.Anchor
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.DecalBuilder.Anchor
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.DecalBuilder.DecalIllumination
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.DecalBuilder.DecalIllumination
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.DecalBuilder.ImageSize
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.DecalBuilder.ImageSize
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.DecalBuilder.Scaling
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.DecalBuilder.Scaling
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.DynamicSectionTypes.ActivePlane
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.DynamicSectionTypes.ActivePlane
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.DynamicSectionTypes.Axis
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.DynamicSectionTypes.Axis
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.DynamicSectionTypes.CapColorOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.DynamicSectionTypes.CapColorOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.DynamicSectionTypes.Clip
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.DynamicSectionTypes.Clip
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.DynamicSectionTypes.CoordinateSystem
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.DynamicSectionTypes.CoordinateSystem
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.DynamicSectionTypes.CurveColorOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.DynamicSectionTypes.CurveColorOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.DynamicSectionTypes.Type
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.DynamicSectionTypes.Type
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.FacetSettingsBuilder.AdvVisToleranceSetting
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.FacetSettingsBuilder.AdvVisToleranceSetting
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.FacetSettingsBuilder.FacetScale
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.FacetSettingsBuilder.FacetScale
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.FacetSettingsBuilder.FacetToViewRatio
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.FacetSettingsBuilder.FacetToViewRatio
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.FacetSettingsBuilder.FacetUpdate
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.FacetSettingsBuilder.FacetUpdate
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.FacetSettingsBuilder.ShadedToleranceSetting
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.FacetSettingsBuilder.ShadedToleranceSetting
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.GridBuilder.LineStyleType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.GridBuilder.LineStyleType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.GridBuilder.LineWeightType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.GridBuilder.LineWeightType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.ImageBaseBuilder.BasePointChoices
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.ImageBaseBuilder.BasePointChoices
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.ImageBaseBuilder.ImageColorModes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.ImageBaseBuilder.ImageColorModes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.ImageBaseBuilder.InsertionPoint
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.ImageBaseBuilder.InsertionPoint
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.ImageBaseBuilder.ReferenceDirection
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.ImageBaseBuilder.ReferenceDirection
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.ImageBaseBuilder.SizeOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.ImageBaseBuilder.SizeOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.ImageBaseBuilder.TransparencyColorFrom
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.ImageBaseBuilder.TransparencyColorFrom
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.ImageBasedLighting.ImageBlurType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.ImageBasedLighting.ImageBlurType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.ImageBasedLighting.ImagesType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.ImageBasedLighting.ImagesType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.ImageBasedLighting.ImageUpVectorTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.ImageBasedLighting.ImageUpVectorTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.ImageBasedLighting.ShadowsType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.ImageBasedLighting.ShadowsType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.LayerSettingsBuilder.LayerOptionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.LayerSettingsBuilder.LayerOptionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.LightBuilder.LightMode
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.LightBuilder.LightMode
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.LightBuilder.ShadowType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.LightBuilder.ShadowType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.NonProportionalZoom.MethodType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.NonProportionalZoom.MethodType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.PlanarShipGridBuilder.IntersectOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.PlanarShipGridBuilder.IntersectOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.PlanarShipGridBuilder.LabelDisplayOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.PlanarShipGridBuilder.LabelDisplayOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.RayTracedStudioBuilder.StationaryDisplayQualityType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.RayTracedStudioBuilder.StationaryDisplayQualityType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.RayTracedStudioEditorBuilder.DynamicRayTracedStudioTilingQualityType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.RayTracedStudioEditorBuilder.DynamicRayTracedStudioTilingQualityType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.RayTracedStudioEditorBuilder.RayTracedStudioStaticImageFileFormatType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.RayTracedStudioEditorBuilder.RayTracedStudioStaticImageFileFormatType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.RayTracedStudioEditorBuilder.RayTracedStudioStaticImageOrientationType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.RayTracedStudioEditorBuilder.RayTracedStudioStaticImageOrientationType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.RayTracedStudioEditorBuilder.RayTracedStudioStaticImageResolutionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.RayTracedStudioEditorBuilder.RayTracedStudioStaticImageResolutionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.RayTracedStudioEditorBuilder.RayTracedStudioStaticImageSizeType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.RayTracedStudioEditorBuilder.RayTracedStudioStaticImageSizeType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.RayTracedStudioEditorBuilder.RayTracedStudioStaticImageUnitsType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.RayTracedStudioEditorBuilder.RayTracedStudioStaticImageUnitsType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.RayTracedStudioEditorBuilder.StaticAntialiasingType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.RayTracedStudioEditorBuilder.StaticAntialiasingType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.RayTracedStudioEditorBuilder.StaticRayTracedStudioQualityType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.RayTracedStudioEditorBuilder.StaticRayTracedStudioQualityType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.RayTracedStudioEditorBuilder.StationaryAntialiasingType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.RayTracedStudioEditorBuilder.StationaryAntialiasingType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.RayTracedStudioEditorBuilder.StationaryRayTracedStudioQualityType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.RayTracedStudioEditorBuilder.StationaryRayTracedStudioQualityType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.Reflection.Type
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.Reflection.Type
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.SaveImageFileBrowserBuilder.FileFormats
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.SaveImageFileBrowserBuilder.FileFormats
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.SectionCurveSettingsBuilder.ColorOptionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.SectionCurveSettingsBuilder.ColorOptionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.SelPref.FaceAnalysisViews
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.SelPref.FaceAnalysisViews
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.SelPref.Method
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.SelPref.Method
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.SelPref.MouseGesture
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.SelPref.MouseGesture
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.SelPref.SelectionRadius
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.SelPref.SelectionRadius
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.SelPref.SelectionRule
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.SelPref.SelectionRule
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.SelPref.ShadedViews
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.SelPref.ShadedViews
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.Shadows.RealTimeState
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.Shadows.RealTimeState
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.Shadows.SsaoContrastType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.Shadows.SsaoContrastType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.Shadows.SsaoQualityType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.Shadows.SsaoQualityType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.Stage.OrientationType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.Stage.OrientationType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.Stage.WallType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.Stage.WallType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.StudioImageCaptureBuilder.AASamplesEnumType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.StudioImageCaptureBuilder.AASamplesEnumType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.StudioImageCaptureBuilder.DPIEnumType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.StudioImageCaptureBuilder.DPIEnumType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.StudioImageCaptureBuilder.DrawingSizeEnumType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.StudioImageCaptureBuilder.DrawingSizeEnumType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.StudioImageCaptureBuilder.OrientEnumType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.StudioImageCaptureBuilder.OrientEnumType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.StudioImageCaptureBuilder.UnitsEnumType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.StudioImageCaptureBuilder.UnitsEnumType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.TransientText.StandardTextRef
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.TransientText.StandardTextRef
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.TransientText.TextSize
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.TransientText.TextSize
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.TransientText.ViewType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.TransientText.ViewType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.TrueShadingBuilder.BgdImageType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.TrueShadingBuilder.BgdImageType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.TrueShadingBuilder.BgdType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.TrueShadingBuilder.BgdType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.TrueShadingBuilder.EnvironmentMapType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.TrueShadingBuilder.EnvironmentMapType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.TrueShadingBuilder.MaterialType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.TrueShadingBuilder.MaterialType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.TrueShadingBuilder.SHEDLightCollectionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.TrueShadingBuilder.SHEDLightCollectionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.TrueShadingBuilder.SurfaceOrientType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.TrueShadingBuilder.SurfaceOrientType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.TrueStudioBuilder.GlobalMaterial
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.TrueStudioBuilder.GlobalMaterial
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.TrueStudioBuilder.RenderMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.TrueStudioBuilder.RenderMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.Wall.MaterialTextureType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.Wall.MaterialTextureType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.display.Wall.MaterialType
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.display.Wall.MaterialType
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.DisplayableObject.ObjectFont
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.DisplayableObject.ObjectFont
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.DisplayableObject.ObjectWidth
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.DisplayableObject.ObjectWidth
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.DisplayManager.FacetCacheMemoryLevelType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.DisplayManager.FacetCacheMemoryLevelType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.DisplayManager.LayerSetting
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.DisplayManager.LayerSetting
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.DisplayManager.ShowHideScope
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.DisplayManager.ShowHideScope
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.DisplayManager.ShowHideType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.DisplayManager.ShowHideType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drafting.AnnotateViewsBuilder.ExistingAutomaticAnnotation
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drafting.AnnotateViewsBuilder.ExistingAutomaticAnnotation
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drafting.CutCopyPasteBuilder.TypeOperation
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drafting.CutCopyPasteBuilder.TypeOperation
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drafting.CutCopyPasteBuilder.TypePaste
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drafting.CutCopyPasteBuilder.TypePaste
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.AddRemoveBoxViewBuilder.ModeType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.AddRemoveBoxViewBuilder.ModeType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.ArrowDirectionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.ArrowDirectionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.ArrowStyleType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.ArrowStyleType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.BordersAndZonesBuilder.FontEnum
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.BordersAndZonesBuilder.FontEnum
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.BordersAndZonesBuilder.HorizontalCenteringMarkType
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.BordersAndZonesBuilder.HorizontalCenteringMarkType
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.BordersAndZonesBuilder.VerticalCenteringMarkType
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.BordersAndZonesBuilder.VerticalCenteringMarkType
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.BordersAndZonesBuilder.ZoneMethod
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.BordersAndZonesBuilder.ZoneMethod
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.BordersAndZonesBuilder.ZoneOrigin
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.BordersAndZonesBuilder.ZoneOrigin
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.BrokenViewBuilder.BreakLineStyle
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.BrokenViewBuilder.BreakLineStyle
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.BrokenViewBuilder.HorizontalBreakSide
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.BrokenViewBuilder.HorizontalBreakSide
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.BrokenViewBuilder.LineWidth
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.BrokenViewBuilder.LineWidth
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.BrokenViewBuilder.TypeBreak
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.BrokenViewBuilder.TypeBreak
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.BrokenViewBuilder.TypeDirection
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.BrokenViewBuilder.TypeDirection
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.BrokenViewBuilder.VerticalBreakSide
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.BrokenViewBuilder.VerticalBreakSide
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.CustomViewSettingsBuilder.Features
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.CustomViewSettingsBuilder.Features
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.CustomViewSettingsBuilder.Font
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.CustomViewSettingsBuilder.Font
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.CustomViewSettingsBuilder.Interfering
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.CustomViewSettingsBuilder.Interfering
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.CustomViewSettingsBuilder.ThreadStandards
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.CustomViewSettingsBuilder.ThreadStandards
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.CustomViewSettingsBuilder.Width
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.CustomViewSettingsBuilder.Width
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.DetailViewBuilder.LabelOnParentType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.DetailViewBuilder.LabelOnParentType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.DetailViewBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.DetailViewBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.DraftingCurveInfo.DraftingCurveType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.DraftingCurveInfo.DraftingCurveType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.DraftingViewCollection.ViewCopyAnnotOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.DraftingViewCollection.ViewCopyAnnotOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.DraftingViewCollection.ViewCopyDetailOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.DraftingViewCollection.ViewCopyDetailOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.DraftingViewCollection.ViewUpdateOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.DraftingViewCollection.ViewUpdateOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.DrawingCompareSettingsBuilder.ChangeSymbolType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.DrawingCompareSettingsBuilder.ChangeSymbolType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.DrawingCompareSettingsBuilder.ComparisonBaseline
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.DrawingCompareSettingsBuilder.ComparisonBaseline
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.DrawingCompareSettingsBuilder.FontType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.DrawingCompareSettingsBuilder.FontType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.DrawingCompareSettingsBuilder.WidthType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.DrawingCompareSettingsBuilder.WidthType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.DrawingRegionBuilder.ContentToMove
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.DrawingRegionBuilder.ContentToMove
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.DrawingRegionBuilder.RegionContinuation
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.DrawingRegionBuilder.RegionContinuation
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.DrawingRegionBuilder.RegionDraftingObjectType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.DrawingRegionBuilder.RegionDraftingObjectType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.DrawingRegionBuilder.RegionGrowthDirection
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.DrawingRegionBuilder.RegionGrowthDirection
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.DrawingRegionBuilder.RegionHorizontalGrowthDirection
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.DrawingRegionBuilder.RegionHorizontalGrowthDirection
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.DrawingRegionBuilder.RegionVerticalGrowthDirection
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.DrawingRegionBuilder.RegionVerticalGrowthDirection
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.FontEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.FontEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.GeneralWorkFlowBuilder.GridSettingsType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.GeneralWorkFlowBuilder.GridSettingsType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.GeneralWorkFlowBuilder.ModelBasedAlwaysStartType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.GeneralWorkFlowBuilder.ModelBasedAlwaysStartType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.GeneralWorkFlowBuilder.SettingsOrientationType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.GeneralWorkFlowBuilder.SettingsOrientationType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.HingeLineBuilder.Hingeline
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.HingeLineBuilder.Hingeline
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.HorizontalCenteringMarkType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.HorizontalCenteringMarkType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.LabelPositionTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.LabelPositionTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.LetterFormatTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.LetterFormatTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.MarkAsTemplateBuilder.ActionTypeEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.MarkAsTemplateBuilder.ActionTypeEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.MarkAsTemplateBuilder.ItemTypeEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.MarkAsTemplateBuilder.ItemTypeEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.MarkAsTemplateBuilder.RelationTypeEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.MarkAsTemplateBuilder.RelationTypeEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.MarkAsTemplateBuilder.TemplateTypeEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.MarkAsTemplateBuilder.TemplateTypeEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.Method
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.Method
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.MultipleViewPlacementBuilder.Option
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.MultipleViewPlacementBuilder.Option
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.ReferenceShowTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.ReferenceShowTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.ScalePositionTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.ScalePositionTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.ScaleValueFormatTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.ScaleValueFormatTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.SectionInViewBuilder.EditSxtype
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.SectionInViewBuilder.EditSxtype
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.SectionLineBuilder.Types
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.SectionLineBuilder.Types
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.SectionLineSegmentBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.SectionLineSegmentBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.SectionLineSegmentPointBuilder.SegmentTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.SectionLineSegmentPointBuilder.SegmentTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.SectionLineStyleBuilder.ArrowheadStyleType
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.SectionLineStyleBuilder.ArrowheadStyleType
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.SectionLineStyleBuilder.CreateSectionLineType
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.SectionLineStyleBuilder.CreateSectionLineType
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.SectionLineStyleBuilder.FontStyle
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.SectionLineStyleBuilder.FontStyle
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.SectionLineStyleBuilder.LabelLocationStyle
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.SectionLineStyleBuilder.LabelLocationStyle
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.SectionLineStyleBuilder.StandardStyle
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.SectionLineStyleBuilder.StandardStyle
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.SectionLineStyleBuilder.WidthStyle
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.SectionLineStyleBuilder.WidthStyle
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.SectionViewBuilder.SectionCutType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.SectionViewBuilder.SectionCutType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.SectionViewBuilder.SectionLineType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.SectionViewBuilder.SectionLineType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.SectionViewBuilder.SectionViewModeType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.SectionViewBuilder.SectionViewModeType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.ShipbuildingLinesViewStyle.Lines
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.ShipbuildingLinesViewStyle.Lines
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.ShipbuildingLinesViewStyle.ShipbuildingLines
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.ShipbuildingLinesViewStyle.ShipbuildingLines
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.ShipDraftingViewLinesViewStyle.Lines
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.ShipDraftingViewLinesViewStyle.Lines
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.SketchSectionLineBuilder.SectionLineTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.SketchSectionLineBuilder.SectionLineTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.StandardViewsBuilder.Placement
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.StandardViewsBuilder.Placement
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.StandardViewsBuilder.Type
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.StandardViewsBuilder.Type
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.StandardViewsBuilder.View
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.StandardViewsBuilder.View
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.TrimmingMarkStyleType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.TrimmingMarkStyleType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.VerticalCenteringMarkType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.VerticalCenteringMarkType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.View2dOrientBuilder.CustomMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.View2dOrientBuilder.CustomMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.View2dOrientBuilder.Type
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.View2dOrientBuilder.Type
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.ViewBoundaryBuilder.Type
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.ViewBoundaryBuilder.Type
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.ViewBreakBuilder.Viewbreaklinestyle
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.ViewBreakBuilder.Viewbreaklinestyle
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.ViewCommonViewLabelBuilder.SecondaryAlignmentType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.ViewCommonViewLabelBuilder.SecondaryAlignmentType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.ViewCommonViewLabelBuilder.SecondaryIndexingType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.ViewCommonViewLabelBuilder.SecondaryIndexingType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.ViewCopyTo3dBuilder.BoundingBoxOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.ViewCopyTo3dBuilder.BoundingBoxOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.ViewCopyTo3dBuilder.DistanceFromViewPlaneOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.ViewCopyTo3dBuilder.DistanceFromViewPlaneOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.ViewCopyTo3dBuilder.Option
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.ViewCopyTo3dBuilder.Option
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.ViewCopyTo3dBuilder.OutputOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.ViewCopyTo3dBuilder.OutputOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.ViewCopyTo3dBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.ViewCopyTo3dBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.ViewCreationWizardBuilder.Option
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.ViewCreationWizardBuilder.Option
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.ViewCreationWizardBuilder.ResolutionOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.ViewCreationWizardBuilder.ResolutionOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.ViewCreationWizardBuilder.ViewBoundaryOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.ViewCreationWizardBuilder.ViewBoundaryOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.ViewCreationWizardBuilder.ViewRepresentations
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.ViewCreationWizardBuilder.ViewRepresentations
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.ViewDetailLabelBuilder.LabelParentDisplayTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.ViewDetailLabelBuilder.LabelParentDisplayTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.ViewDetailLabelBuilder.LabelParentTextPlacement
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.ViewDetailLabelBuilder.LabelParentTextPlacement
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.ViewLabelTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.ViewLabelTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.ViewOrientationBuilder.Orientation
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.ViewOrientationBuilder.Orientation
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.ViewPlacementBuilder.Method
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.ViewPlacementBuilder.Method
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.ViewPlacementBuilder.Option
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.ViewPlacementBuilder.Option
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.ViewProjectedArrowSettingsBuilder.DimensionsStyleType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.ViewProjectedArrowSettingsBuilder.DimensionsStyleType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.ViewProjectedArrowSettingsBuilder.DispalyLabelType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.ViewProjectedArrowSettingsBuilder.DispalyLabelType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.ViewProjectedViewSettingsBuilder.DisplayArrowOnParentViewType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.ViewProjectedViewSettingsBuilder.DisplayArrowOnParentViewType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.ViewProjectionBuilder.CurveType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.ViewProjectionBuilder.CurveType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.ViewProjectionBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.ViewProjectionBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.ViewProjectionPlaneBuilder.PlaneOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.ViewProjectionPlaneBuilder.PlaneOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.ViewScaleBuilder.Type
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.ViewScaleBuilder.Type
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.ViewSectionLineBuilder.DisplayType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.ViewSectionLineBuilder.DisplayType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.ViewSectionLineBuilder.LocationType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.ViewSectionLineBuilder.LocationType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.ViewSectionLineBuilder.ShowSectionLineType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.ViewSectionLineBuilder.ShowSectionLineType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.ViewSectionLineBuilder.StyleType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.ViewSectionLineBuilder.StyleType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.ViewStyleFPCalloutConfigBuilder.OrientationType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.ViewStyleFPCalloutConfigBuilder.OrientationType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.ViewWorkflowBuilder.Display
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.ViewWorkflowBuilder.Display
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.ViewWorkflowBuilder.Handlingbodies
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.ViewWorkflowBuilder.Handlingbodies
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.ViewWorkflowBuilder.HandlingBodiesType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.ViewWorkflowBuilder.HandlingBodiesType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.ViewWorkflowBuilder.Style
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.ViewWorkflowBuilder.Style
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.drawings.ZoneOrigin
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.drawings.ZoneOrigin
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.DxfdwgCreator.AutoCADRevisionOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.DxfdwgCreator.AutoCADRevisionOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.DxfdwgCreator.ExportAsOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.DxfdwgCreator.ExportAsOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.DxfdwgCreator.ExportDataOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.DxfdwgCreator.ExportDataOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.DxfdwgCreator.ExportFacesAsOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.DxfdwgCreator.ExportFacesAsOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.DxfdwgCreator.ExportFromOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.DxfdwgCreator.ExportFromOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.DxfdwgCreator.ExportSplinesAsOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.DxfdwgCreator.ExportSplinesAsOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.DxfdwgCreator.OutputFileTypeOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.DxfdwgCreator.OutputFileTypeOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.DxfdwgCreator.OutputToOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.DxfdwgCreator.OutputToOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.DxfdwgCreator.WidthfactorMethodOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.DxfdwgCreator.WidthfactorMethodOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.DxfdwgImporter.AspectRatioOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.DxfdwgImporter.AspectRatioOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.DxfdwgImporter.ConvLayoutsAs
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.DxfdwgImporter.ConvLayoutsAs
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.DxfdwgImporter.ImportBlocksAs
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.DxfdwgImporter.ImportBlocksAs
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.DxfdwgImporter.ImportCurvesAs
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.DxfdwgImporter.ImportCurvesAs
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.DxfdwgImporter.ImportDimensionsAs
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.DxfdwgImporter.ImportDimensionsAs
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.DxfdwgImporter.ImportPolylinesAs
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.DxfdwgImporter.ImportPolylinesAs
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.DxfdwgImporter.ImportToEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.DxfdwgImporter.ImportToEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.DxfdwgImporter.ProcessingOrderAs
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.DxfdwgImporter.ProcessingOrderAs
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.DxfdwgImporter.SendLayoutsAs
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.DxfdwgImporter.SendLayoutsAs
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.DxfdwgImporter.SendModelDataAs
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.DxfdwgImporter.SendModelDataAs
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.DxfdwgImporter.UnitsEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.DxfdwgImporter.UnitsEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.Edge.EdgeType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.Edge.EdgeType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.EffectivityConditionBuilder.EffectivityConditionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.EffectivityConditionBuilder.EffectivityConditionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.EffectivityConditionBuilder.ToUnitType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.EffectivityConditionBuilder.ToUnitType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.EndCutBlockBuilder.TaperTypeOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.EndCutBlockBuilder.TaperTypeOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.Expression.UnitsOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.Expression.UnitsOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.ExpressionCollection.ExportMode
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.ExpressionCollection.ExportMode
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.ExpressionCollection.ImportMode
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.ExpressionCollection.ImportMode
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.ExpressionCollection.SortType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.ExpressionCollection.SortType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.ExtrudeLimitDataLimitType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.ExtrudeLimitDataLimitType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.ExtrudeOffsetDataOffsetType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.ExtrudeOffsetDataOffsetType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.ExtrudeTaperDataTaperType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.ExtrudeTaperDataTaperType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.Face.FaceType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.Face.FaceType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.facet.BestFitAlignBuilder.ConstraintOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.facet.BestFitAlignBuilder.ConstraintOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.facet.BridgeFacetBodyBuilder.Input
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.facet.BridgeFacetBodyBuilder.Input
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.facet.BridgeFacetBodyBuilder.SmoothTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.facet.BridgeFacetBodyBuilder.SmoothTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.facet.CleanupFacetBodyBuilder.CleanupOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.facet.CleanupFacetBodyBuilder.CleanupOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.facet.ConvertFacetBodyBuilder.OutputTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.facet.ConvertFacetBodyBuilder.OutputTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.facet.DecimateFacetBodyBuilder.DecimateMethodType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.facet.DecimateFacetBodyBuilder.DecimateMethodType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.facet.ExtrudeFacetBodyBuilder.LimitType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.facet.ExtrudeFacetBodyBuilder.LimitType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.facet.FacetedBody.FacetedbodyType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.facet.FacetedBody.FacetedbodyType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.facet.FacetedBodyCollection.Type
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.facet.FacetedBodyCollection.Type
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.facet.FacetedEdge.FacetededgeType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.facet.FacetedEdge.FacetededgeType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.facet.FacetedFace.FacetedfaceType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.facet.FacetedFace.FacetedfaceType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.facet.FeatureExtractionBuilder.InputActions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.facet.FeatureExtractionBuilder.InputActions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.facet.FillHoleBuilder.SmoothTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.facet.FillHoleBuilder.SmoothTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.facet.FillHoleBuilder.TargetTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.facet.FillHoleBuilder.TargetTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.facet.FillHoleBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.facet.FillHoleBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.facet.MergeFacetBodyBuilder.Input
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.facet.MergeFacetBodyBuilder.Input
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.facet.MultiPatchAlignmentBuilder.ResolutionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.facet.MultiPatchAlignmentBuilder.ResolutionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.facet.SewFacetBodyBuilder.Input
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.facet.SewFacetBodyBuilder.Input
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.facet.SewFacetBodyBuilder.VertexIndex
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.facet.SewFacetBodyBuilder.VertexIndex
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.facet.SnipFacetBodyBuilder.BoundaryFacetTreatmentMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.facet.SnipFacetBodyBuilder.BoundaryFacetTreatmentMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.facet.SnipFacetBodyBuilder.DirectionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.facet.SnipFacetBodyBuilder.DirectionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.facet.SnipFacetBodyBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.facet.SnipFacetBodyBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.facet.SubdivideFacetBodyBuilder.InterpolationMethodType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.facet.SubdivideFacetBodyBuilder.InterpolationMethodType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.facet.SubdivideFacetBodyBuilder.SubdivisionMethodType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.facet.SubdivideFacetBodyBuilder.SubdivisionMethodType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.FeatureProcessBuilderStatus.ResultStatus
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.FeatureProcessBuilderStatus.ResultStatus
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.AdmMoveFaceBuilder.MoveOptionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.AdmMoveFaceBuilder.MoveOptionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.AeroFlangeBuilder.GuideObjectTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.AeroFlangeBuilder.GuideObjectTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.AeroFlangeBuilder.LimitObjectTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.AeroFlangeBuilder.LimitObjectTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.AeroFlangeBuilder.ThicknessDimensionOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.AeroFlangeBuilder.ThicknessDimensionOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.AeroFlangeBuilder.WidthDimensionOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.AeroFlangeBuilder.WidthDimensionOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.AeroFlangeBuilder.WidthMethods
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.AeroFlangeBuilder.WidthMethods
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.AeroRibBuilder.GuideObjectTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.AeroRibBuilder.GuideObjectTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.AeroRibBuilder.HeightDimensionOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.AeroRibBuilder.HeightDimensionOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.AeroRibBuilder.LimitObjectTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.AeroRibBuilder.LimitObjectTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.AeroRibBuilder.ThicknessDimensionOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.AeroRibBuilder.ThicknessDimensionOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.AestheticFaceBlendBuilder.AlignmentType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.AestheticFaceBlendBuilder.AlignmentType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.AestheticFaceBlendBuilder.BlendFacesType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.AestheticFaceBlendBuilder.BlendFacesType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.AestheticFaceBlendBuilder.BlendType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.AestheticFaceBlendBuilder.BlendType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.AestheticFaceBlendBuilder.CenterType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.AestheticFaceBlendBuilder.CenterType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.AestheticFaceBlendBuilder.EndTrimObjectType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.AestheticFaceBlendBuilder.EndTrimObjectType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.AestheticFaceBlendBuilder.RhoType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.AestheticFaceBlendBuilder.RhoType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.AestheticFaceBlendBuilder.SegmentationType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.AestheticFaceBlendBuilder.SegmentationType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.AestheticFaceBlendBuilder.ShapeType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.AestheticFaceBlendBuilder.ShapeType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.AestheticFaceBlendBuilder.StartTrimObjectType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.AestheticFaceBlendBuilder.StartTrimObjectType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.AnalyzePocketBuilder.AngledWallSolutions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.AnalyzePocketBuilder.AngledWallSolutions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.AnalyzePocketBuilder.ToolTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.AnalyzePocketBuilder.ToolTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.AOCSBuilder.Extend
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.AOCSBuilder.Extend
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.AOCSBuilder.ExtendToFace
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.AOCSBuilder.ExtendToFace
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.AOCSBuilder.FilletOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.AOCSBuilder.FilletOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.AOCSBuilder.OffsetDirection
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.AOCSBuilder.OffsetDirection
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.AOCSBuilder.OffsetDistanceType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.AOCSBuilder.OffsetDistanceType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.AOCSBuilder.OffsetType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.AOCSBuilder.OffsetType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.AOCSBuilder.Trim
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.AOCSBuilder.Trim
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.AssociativeArcBuilder.CenterReference
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.AssociativeArcBuilder.CenterReference
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.AssociativeArcBuilder.EndOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.AssociativeArcBuilder.EndOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.AssociativeArcBuilder.EndReference
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.AssociativeArcBuilder.EndReference
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.AssociativeArcBuilder.MidOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.AssociativeArcBuilder.MidOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.AssociativeArcBuilder.MidReference
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.AssociativeArcBuilder.MidReference
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.AssociativeArcBuilder.StartOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.AssociativeArcBuilder.StartOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.AssociativeArcBuilder.StartReference
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.AssociativeArcBuilder.StartReference
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.AssociativeArcBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.AssociativeArcBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.AssociativeLineBuilder.EndOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.AssociativeLineBuilder.EndOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.AssociativeLineBuilder.EndReference
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.AssociativeLineBuilder.EndReference
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.AssociativeLineBuilder.StartOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.AssociativeLineBuilder.StartOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.AssociativeLineBuilder.StartReference
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.AssociativeLineBuilder.StartReference
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.AssociativityType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.AssociativityType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.BlendCornerBuilder.ContinuityTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.BlendCornerBuilder.ContinuityTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.BlendPocketBuilder.AngledWallSolutions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.BlendPocketBuilder.AngledWallSolutions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.BlendPocketBuilder.ToolTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.BlendPocketBuilder.ToolTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.BridgeCurveBuilder.ConstraintTypes
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.BridgeCurveBuilder.ConstraintTypes
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.BridgeCurveBuilder.CurveDirectionTypes
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.BridgeCurveBuilder.CurveDirectionTypes
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.BridgeCurveBuilder.CurveFitTypes
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.BridgeCurveBuilder.CurveFitTypes
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.BridgeCurveBuilder.EndObjectTypes
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.BridgeCurveBuilder.EndObjectTypes
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.BridgeCurveBuilder.MinRadiusTypes
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.BridgeCurveBuilder.MinRadiusTypes
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.BridgeCurveBuilder.SelectedObject
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.BridgeCurveBuilder.SelectedObject
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.BridgeCurveBuilder.ShapeControlTypes
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.BridgeCurveBuilder.ShapeControlTypes
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.BridgeCurveBuilder.SurfaceDirectionTypes
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.BridgeCurveBuilder.SurfaceDirectionTypes
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.BridgeCurveBuilderEx.EndObjectTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.BridgeCurveBuilderEx.EndObjectTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.BridgeCurveBuilderEx.RadiusConstraintMethods
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.BridgeCurveBuilderEx.RadiusConstraintMethods
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.BridgeCurveBuilderEx.ShapeControlMethods
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.BridgeCurveBuilderEx.ShapeControlMethods
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.BridgeCurveBuilderEx.StartObjectTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.BridgeCurveBuilderEx.StartObjectTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.ChamferBuilder.ChamferOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.ChamferBuilder.ChamferOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.ChamferBuilder.OffsetMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.ChamferBuilder.OffsetMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.CircularBlendCurveBuilder.CylinderDirectionOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.CircularBlendCurveBuilder.CylinderDirectionOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.CircularBlendCurveBuilder.CylinderRadiusOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.CircularBlendCurveBuilder.CylinderRadiusOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.CompositeCurveBuilder.JoinMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.CompositeCurveBuilder.JoinMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.CompositeCurveBuilder.PartType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.CompositeCurveBuilder.PartType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.ConeBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.ConeBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.CopyPasteBuilder.BuilderVersion
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.CopyPasteBuilder.BuilderVersion
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.CopyPasteBuilder.ExpressionTransferOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.CopyPasteBuilder.ExpressionTransferOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.CopyPasteBuilder.ParentSelectOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.CopyPasteBuilder.ParentSelectOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.CopyPasteBuilder.ParentTransferOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.CopyPasteBuilder.ParentTransferOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.CylinderBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.CylinderBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.DatumAxisBuilder.AlternateSolution
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.DatumAxisBuilder.AlternateSolution
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.DatumAxisBuilder.ConstraintType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.DatumAxisBuilder.ConstraintType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.DatumAxisBuilder.CurveOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.DatumAxisBuilder.CurveOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.DatumAxisBuilder.CurveOrientations
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.DatumAxisBuilder.CurveOrientations
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.DatumAxisBuilder.DirectionOrientations
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.DatumAxisBuilder.DirectionOrientations
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.DatumAxisBuilder.FixedType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.DatumAxisBuilder.FixedType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.DatumAxisBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.DatumAxisBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.DatumAxisBuilder.UseArcLength
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.DatumAxisBuilder.UseArcLength
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.DatumPlaneBuilder.AlternateSolution
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.DatumPlaneBuilder.AlternateSolution
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.DatumPlaneBuilder.ConstraintType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.DatumPlaneBuilder.ConstraintType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.DatumPlaneBuilder.CurveOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.DatumPlaneBuilder.CurveOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.DatumPlaneBuilder.FixedType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.DatumPlaneBuilder.FixedType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.DatumPlaneBuilder.UseArcLength
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.DatumPlaneBuilder.UseArcLength
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.DeleteFaceBuilder.CapOptionValues
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.DeleteFaceBuilder.CapOptionValues
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.DeleteFaceBuilder.FaceEdgeBlendPreferenceOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.DeleteFaceBuilder.FaceEdgeBlendPreferenceOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.DeleteFaceBuilder.SelectTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.DeleteFaceBuilder.SelectTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.DeleteFaceBuilder.SetbackOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.DeleteFaceBuilder.SetbackOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.DivideCurveBuilder.CornerOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.DivideCurveBuilder.CornerOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.DivideCurveBuilder.EqualSegmentOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.DivideCurveBuilder.EqualSegmentOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.DivideCurveBuilder.InputArcLengthDirectionFlag
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.DivideCurveBuilder.InputArcLengthDirectionFlag
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.DivideCurveBuilder.KnotPointOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.DivideCurveBuilder.KnotPointOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.DivideCurveBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.DivideCurveBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.DraftBodyBuilder.MatchingScope
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.DraftBodyBuilder.MatchingScope
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.DraftBodyBuilder.MatchingType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.DraftBodyBuilder.MatchingType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.DraftBodyBuilder.MatchOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.DraftBodyBuilder.MatchOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.DraftBodyBuilder.Method
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.DraftBodyBuilder.Method
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.DraftBodyBuilder.RepairingPartingEdgeOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.DraftBodyBuilder.RepairingPartingEdgeOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.DraftBodyBuilder.RepairOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.DraftBodyBuilder.RepairOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.DraftBodyBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.DraftBodyBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.DraftBuilder.DraftReferencesMethods
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.DraftBuilder.DraftReferencesMethods
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.DraftBuilder.Method
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.DraftBuilder.Method
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.DraftBuilder.Type
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.DraftBuilder.Type
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.EdgeBlendBuilder.Conic
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.EdgeBlendBuilder.Conic
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.EdgeBlendBuilder.FaceContinuity
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.EdgeBlendBuilder.FaceContinuity
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.EdgeBlendBuilder.OrderOfBlending
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.EdgeBlendBuilder.OrderOfBlending
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.EdgeBlendBuilder.Overlap
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.EdgeBlendBuilder.Overlap
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.EdgeBlendBuilder.Rhotype
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.EdgeBlendBuilder.Rhotype
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.EdgeBlendBuilder.Section
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.EdgeBlendBuilder.Section
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.EdgeBlendBuilder.Setback
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.EdgeBlendBuilder.Setback
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.EdgeSymmetryBuilder.MovementDirections
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.EdgeSymmetryBuilder.MovementDirections
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.EdgeSymmetryBuilder.MovementMethods
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.EdgeSymmetryBuilder.MovementMethods
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.EdgeSymmetryBuilder.SymmetryPlaneOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.EdgeSymmetryBuilder.SymmetryPlaneOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.EmbossJoggle.JoggleDirectionMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.EmbossJoggle.JoggleDirectionMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.EmbossLimit.EndcapMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.EmbossLimit.EndcapMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.EmbossLimit.EndcapSourceOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.EmbossLimit.EndcapSourceOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.EmbossProjection.ProjectionOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.EmbossProjection.ProjectionOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.EmbossRegion.ConvexityOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.EmbossRegion.ConvexityOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.EmbossSidewall.SidewallMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.EmbossSidewall.SidewallMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.EnlargeBuilder.ExtensionTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.EnlargeBuilder.ExtensionTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.ExtensionBuilder.Distance
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.ExtensionBuilder.Distance
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.ExtensionBuilder.Extension
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.ExtensionBuilder.Extension
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.ExtensionBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.ExtensionBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.ExtractFaceBuilder.ExtractType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.ExtractFaceBuilder.ExtractType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.ExtractFaceBuilder.FaceOptionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.ExtractFaceBuilder.FaceOptionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.ExtractFaceBuilder.FaceSurfaceType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.ExtractFaceBuilder.FaceSurfaceType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.ExtractFaceBuilder.FeatureOptionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.ExtractFaceBuilder.FeatureOptionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.ExtractFaceBuilder.ParentPartType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.ExtractFaceBuilder.ParentPartType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.FaceBlendBuilder.CrossSectionOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.FaceBlendBuilder.CrossSectionOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.FaceBlendBuilder.DefiningType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.FaceBlendBuilder.DefiningType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.FaceBlendBuilder.OverflowMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.FaceBlendBuilder.OverflowMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.FaceBlendBuilder.RhoMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.FaceBlendBuilder.RhoMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.FaceBlendBuilder.TrimmingMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.FaceBlendBuilder.TrimmingMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.FaceBlendBuilder.Type
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.FaceBlendBuilder.Type
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.FaceBlendBuilder.WidthMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.FaceBlendBuilder.WidthMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.FeatureCollection.ReorderType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.FeatureCollection.ReorderType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.FillHoleBuilder.ContinuityTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.FillHoleBuilder.ContinuityTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.FillHoleBuilder.ShapeControlTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.FillHoleBuilder.ShapeControlTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.FitCurveBuilder.FittingParametersOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.FitCurveBuilder.FittingParametersOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.FitCurveBuilder.ProjectionDirectionOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.FitCurveBuilder.ProjectionDirectionOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.FitCurveBuilder.TargetSourceTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.FitCurveBuilder.TargetSourceTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.FitCurveBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.FitCurveBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.FitSurfaceBuilder.DirectionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.FitSurfaceBuilder.DirectionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.FitSurfaceBuilder.TargetType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.FitSurfaceBuilder.TargetType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.FitSurfaceBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.FitSurfaceBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.GeneralConicBuilder.DrawingPlaneOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.GeneralConicBuilder.DrawingPlaneOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.GeneralConicBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.GeneralConicBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.GeodesicIntersectBuilder.Type
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.GeodesicIntersectBuilder.Type
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.GeodesicProjectBuilder.Type
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.GeodesicProjectBuilder.Type
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.GeomcopyBuilder.AlongPathDistanceOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.GeomcopyBuilder.AlongPathDistanceOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.GeomcopyBuilder.CsysMirrorOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.GeomcopyBuilder.CsysMirrorOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.GeomcopyBuilder.TransformTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.GeomcopyBuilder.TransformTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.GeometricConstraintData.AutoConstraintType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.GeometricConstraintData.AutoConstraintType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.GeometricConstraintData.ParameterDirection
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.GeometricConstraintData.ParameterDirection
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.GlobalShapingBuilder.BodyMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.GlobalShapingBuilder.BodyMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.GlobalShapingBuilder.DeformationTypeValues
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.GlobalShapingBuilder.DeformationTypeValues
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.GlobalShapingBuilder.DeformBodyType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.GlobalShapingBuilder.DeformBodyType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.GlobalShapingBuilder.DirectionMethodType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.GlobalShapingBuilder.DirectionMethodType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.GlobalShapingBuilder.ModifyMethodType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.GlobalShapingBuilder.ModifyMethodType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.GlobalShapingBuilder.OffsetMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.GlobalShapingBuilder.OffsetMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.GlobalShapingBuilder.PointMethodType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.GlobalShapingBuilder.PointMethodType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.GlobalShapingBuilder.RadiusType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.GlobalShapingBuilder.RadiusType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.GlobalShapingBuilder.RotationMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.GlobalShapingBuilder.RotationMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.GlobalShapingBuilder.RotationMethodType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.GlobalShapingBuilder.RotationMethodType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.GlobalShapingBuilder.TargetCurveOrientationType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.GlobalShapingBuilder.TargetCurveOrientationType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.GlobalShapingBuilder.TransitionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.GlobalShapingBuilder.TransitionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.GuidedExtensionBuilderEx.SegmentType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.GuidedExtensionBuilderEx.SegmentType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.GuidedExtensionBuilderEx.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.GuidedExtensionBuilderEx.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.HelixBuilder.LengthMethods
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.HelixBuilder.LengthMethods
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.HelixBuilder.OrientationOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.HelixBuilder.OrientationOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.HelixBuilder.SizeOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.HelixBuilder.SizeOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.HelixBuilder.TurnDirections
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.HelixBuilder.TurnDirections
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.HelixBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.HelixBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.Hole.Subtype
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.Hole.Subtype
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.HolePackageBuilder.HoleDepthLimitOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.HolePackageBuilder.HoleDepthLimitOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.HolePackageBuilder.HoleForms
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.HolePackageBuilder.HoleForms
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.HolePackageBuilder.ThreadLengthOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.HolePackageBuilder.ThreadLengthOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.HolePackageBuilder.ThreadRotationOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.HolePackageBuilder.ThreadRotationOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.HolePackageBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.HolePackageBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.IFormBuilder.BSurfaceExtractionOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.IFormBuilder.BSurfaceExtractionOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.IFormBuilder.GlobalTransitionTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.IFormBuilder.GlobalTransitionTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.IFormBuilder.InsertionMethodOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.IFormBuilder.InsertionMethodOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.IFormBuilder.ParameterDirectionOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.IFormBuilder.ParameterDirectionOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.IFormBuilder.TransitionTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.IFormBuilder.TransitionTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.IsoparametricCurvesBuilder.DirectionTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.IsoparametricCurvesBuilder.DirectionTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.IsoparametricCurvesBuilder.PlacementTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.IsoparametricCurvesBuilder.PlacementTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.JoinCurvesBuilder.OutputCurve
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.JoinCurvesBuilder.OutputCurve
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.LabelChamferBuilder.ChamferOrientType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.LabelChamferBuilder.ChamferOrientType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.LabelChamferBuilder.ChamferType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.LabelChamferBuilder.ChamferType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.LawExtensionBuilder.OppositeSideExtensionOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.LawExtensionBuilder.OppositeSideExtensionOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.LawExtensionBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.LawExtensionBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.LawExtensionBuilderEx.MiterOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.LawExtensionBuilderEx.MiterOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.LawExtensionBuilderEx.OppositeSideExtensionOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.LawExtensionBuilderEx.OppositeSideExtensionOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.LawExtensionBuilderEx.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.LawExtensionBuilderEx.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.LinearDimensionBuilder.OrientationOptionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.LinearDimensionBuilder.OrientationOptionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.MapleBuilder.AssociativityEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.MapleBuilder.AssociativityEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.MatchEdgeBuilder.EdgeConstraintType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.MatchEdgeBuilder.EdgeConstraintType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.MatchEdgeBuilder.MatchExact
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.MatchEdgeBuilder.MatchExact
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.MatchEdgeBuilder.PoleMoveDirection
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.MatchEdgeBuilder.PoleMoveDirection
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.MatchEdgeBuilder.PoleMovementConstraintEnumType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.MatchEdgeBuilder.PoleMovementConstraintEnumType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.MatchEdgeBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.MatchEdgeBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.MatchedReferenceBuilder.ResolvedStatus
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.MatchedReferenceBuilder.ResolvedStatus
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.MatchedReferenceBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.MatchedReferenceBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.MeshSurfaceBuilder.ConstraintDirection
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.MeshSurfaceBuilder.ConstraintDirection
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.MeshSurfaceBuilder.ConstraintType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.MeshSurfaceBuilder.ConstraintType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.MeshTransformerBuilder.ContinuityType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.MeshTransformerBuilder.ContinuityType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.MeshTransformerBuilder.MeshTopologyType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.MeshTransformerBuilder.MeshTopologyType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.MeshTransformerBuilder.SmoothingType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.MeshTransformerBuilder.SmoothingType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.MeshTransformerBuilder.StepCountValue
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.MeshTransformerBuilder.StepCountValue
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.MidSurfaceByFacePairsBuilder.PairingStrategyType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.MidSurfaceByFacePairsBuilder.PairingStrategyType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.MidSurfaceByFacePairsBuilder.SurfaceType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.MidSurfaceByFacePairsBuilder.SurfaceType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.MidSurfaceByFacePairsBuilder.TrimmingOptionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.MidSurfaceByFacePairsBuilder.TrimmingOptionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.MirrorBodyBuilder.FeatureOptionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.MirrorBodyBuilder.FeatureOptionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.MirrorBodyBuilder.ParentPart
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.MirrorBodyBuilder.ParentPart
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.MirrorBuilder.CsysMirrorOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.MirrorBuilder.CsysMirrorOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.MirrorCurveBuilder.PlaneOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.MirrorCurveBuilder.PlaneOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.MirrorFaceBuilder.MirrorPlaneOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.MirrorFaceBuilder.MirrorPlaneOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.MoveEdgeBuilder.EndFaceBehaviorType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.MoveEdgeBuilder.EndFaceBehaviorType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.MoveFaceBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.MoveFaceBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.MoveObjectBuilder.LayerOptionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.MoveObjectBuilder.LayerOptionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.MoveObjectBuilder.MoveObjectResultOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.MoveObjectBuilder.MoveObjectResultOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.NSidedSurfaceBuilder.CenterControlAxisType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.NSidedSurfaceBuilder.CenterControlAxisType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.NSidedSurfaceBuilder.CenterControlType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.NSidedSurfaceBuilder.CenterControlType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.NSidedSurfaceBuilder.FlowDirectionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.NSidedSurfaceBuilder.FlowDirectionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.NSidedSurfaceBuilder.SurfaceType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.NSidedSurfaceBuilder.SurfaceType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.NSidedSurfaceBuilder.UVOrientationType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.NSidedSurfaceBuilder.UVOrientationType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.OffsetCurveBuilder.TrimOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.OffsetCurveBuilder.TrimOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.OffsetCurveBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.OffsetCurveBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.OffsetEdgeBuilder.EndFaceBehaviourType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.OffsetEdgeBuilder.EndFaceBehaviourType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.OffsetEdgeBuilder.OffsetEdgeMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.OffsetEdgeBuilder.OffsetEdgeMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.OffsetEmbossBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.OffsetEmbossBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.OffsetSurfaceBuilder.OrientationMethodType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.OffsetSurfaceBuilder.OrientationMethodType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.OffsetSurfaceBuilder.OutputOptionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.OffsetSurfaceBuilder.OutputOptionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.OvercrownBuilder.ControlType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.OvercrownBuilder.ControlType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.OvercrownBuilder.OperationType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.OvercrownBuilder.OperationType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.OvercrownBuilder.OutputType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.OvercrownBuilder.OutputType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.OvercrownBuilder.TransitionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.OvercrownBuilder.TransitionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.PartGeometryCopyBuilder.Type
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.PartGeometryCopyBuilder.Type
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.PartModule.PartLoadOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.PartModule.PartLoadOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.PasteFaceBuilder.PasteOptionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.PasteFaceBuilder.PasteOptionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.PatchOpeningsBuilder.OutputTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.PatchOpeningsBuilder.OutputTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.PatchOpeningsBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.PatchOpeningsBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.PatternFaceBuilder.PatternTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.PatternFaceBuilder.PatternTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.PointSetBuilder.CurvePointsType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.PointSetBuilder.CurvePointsType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.PointSetBuilder.FacePointsType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.PointSetBuilder.FacePointsType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.PointSetBuilder.PatternLimitsType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.PointSetBuilder.PatternLimitsType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.PointSetBuilder.SplinePointsType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.PointSetBuilder.SplinePointsType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.PointSetBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.PointSetBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.PolylineBuilder.DrawingPlaneOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.PolylineBuilder.DrawingPlaneOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.PolylineBuilder.MovementMethodType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.PolylineBuilder.MovementMethodType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.PolylineBuilder.WCSOptionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.PolylineBuilder.WCSOptionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.ProjectCurveBuilder.ArcLengthType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.ProjectCurveBuilder.ArcLengthType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.ProjectCurveBuilder.DirectionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.ProjectCurveBuilder.DirectionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.ProjectCurveBuilder.ProjectionOptionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.ProjectCurveBuilder.ProjectionOptionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.RadialDimensionBuilder.ValueOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.RadialDimensionBuilder.ValueOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.RapidSurfaceBuilder.AttachmentTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.RapidSurfaceBuilder.AttachmentTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.RapidSurfaceBuilder.LoopTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.RapidSurfaceBuilder.LoopTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.RapidSurfaceBuilder.OperationTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.RapidSurfaceBuilder.OperationTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.RasterImage.MaxTextureSize
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.RasterImage.MaxTextureSize
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.RefitFaceBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.RefitFaceBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.ReplaceFaceBuilder.ReplaceTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.ReplaceFaceBuilder.ReplaceTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.ResizeChamferBuilder.SectionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.ResizeChamferBuilder.SectionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.ResizeCurveBuilder.ValueType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.ResizeCurveBuilder.ValueType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.RibBuilder.RibCapGeometryOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.RibBuilder.RibCapGeometryOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.RibBuilder.RibDraftOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.RibBuilder.RibDraftOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.RibBuilder.RibThicknessOffsetOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.RibBuilder.RibThicknessOffsetOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.RibBuilder.RibTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.RibBuilder.RibTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.RPOBuilder.AssociativityType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.RPOBuilder.AssociativityType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.ScaleBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.ScaleBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.SectionCurveBuilder.PlaneType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.SectionCurveBuilder.PlaneType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.SectionCurveBuilder.SpacingType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.SectionCurveBuilder.SpacingType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.SectionInertiaAnalysisBuilder.CoordSys
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.SectionInertiaAnalysisBuilder.CoordSys
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.SectionInertiaAnalysisBuilder.PropertyType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.SectionInertiaAnalysisBuilder.PropertyType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.SectionInertiaAnalysisBuilder.SampleMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.SectionInertiaAnalysisBuilder.SampleMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.SectionInertiaAnalysisBuilder.SectionAxisNormal
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.SectionInertiaAnalysisBuilder.SectionAxisNormal
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.SectionInertiaAnalysisBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.SectionInertiaAnalysisBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.SectionSurfaceBuilder.ControlRegionEnum
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.SectionSurfaceBuilder.ControlRegionEnum
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.SectionSurfaceBuilder.FlowDirectionEnum
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.SectionSurfaceBuilder.FlowDirectionEnum
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.SectionSurfaceBuilder.SectionMethodCircularTangentEnum
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.SectionSurfaceBuilder.SectionMethodCircularTangentEnum
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.SectionSurfaceBuilder.SectionMethodFilletBridgeEnum
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.SectionSurfaceBuilder.SectionMethodFilletBridgeEnum
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.SectionSurfaceBuilder.SectionMethodRhoEnum
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.SectionSurfaceBuilder.SectionMethodRhoEnum
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.SectionSurfaceBuilder.Types
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.SectionSurfaceBuilder.Types
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.SectionSurfaceBuilder.UDegreeEnum
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.SectionSurfaceBuilder.UDegreeEnum
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.SectionSurfaceBuilderEx.BodyType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.SectionSurfaceBuilderEx.BodyType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.SectionSurfaceBuilderEx.CircularType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.SectionSurfaceBuilderEx.CircularType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.SectionSurfaceBuilderEx.ConicType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.SectionSurfaceBuilderEx.ConicType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.SectionSurfaceBuilderEx.ControlRegionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.SectionSurfaceBuilderEx.ControlRegionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.SectionSurfaceBuilderEx.CubicType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.SectionSurfaceBuilderEx.CubicType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.SectionSurfaceBuilderEx.SectionMethodCircleTangentType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.SectionSurfaceBuilderEx.SectionMethodCircleTangentType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.SectionSurfaceBuilderEx.SectionMethodFilletBridgeType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.SectionSurfaceBuilderEx.SectionMethodFilletBridgeType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.SectionSurfaceBuilderEx.SectionMethodRhoType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.SectionSurfaceBuilderEx.SectionMethodRhoType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.SectionSurfaceBuilderEx.SlopeControlType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.SectionSurfaceBuilderEx.SlopeControlType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.SectionSurfaceBuilderEx.Spine
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.SectionSurfaceBuilderEx.Spine
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.SectionSurfaceBuilderEx.SpineEndFlowType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.SectionSurfaceBuilderEx.SpineEndFlowType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.SectionSurfaceBuilderEx.SpineStartFlowType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.SectionSurfaceBuilderEx.SpineStartFlowType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.SectionSurfaceBuilderEx.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.SectionSurfaceBuilderEx.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.SectionSurfaceBuilderEx.UDegreeType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.SectionSurfaceBuilderEx.UDegreeType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.SewBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.SewBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.AeroFlangeBuilder.CompType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.AeroFlangeBuilder.CompType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.AeroFlangeBuilder.DimType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.AeroFlangeBuilder.DimType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.AeroFlangeBuilder.DirType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.AeroFlangeBuilder.DirType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.AeroFlangeBuilder.EndType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.AeroFlangeBuilder.EndType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.AeroFlangeBuilder.LengthType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.AeroFlangeBuilder.LengthType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.AeroFlangeBuilder.MatType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.AeroFlangeBuilder.MatType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.AeroJoggleBuilder.SideType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.AeroJoggleBuilder.SideType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.AeroLighteningCutoutBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.AeroLighteningCutoutBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.ApplicationContext
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.ApplicationContext
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.BeadBuilder.CrossSectionTypeOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.BeadBuilder.CrossSectionTypeOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.BeadBuilder.EndTypeOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.BeadBuilder.EndTypeOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.BeadBuilder.HeightSideOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.BeadBuilder.HeightSideOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.BendBuilder.BendDirectionOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.BendBuilder.BendDirectionOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.BendBuilder.BendLocationOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.BendBuilder.BendLocationOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.BendBuilder.FixedSideOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.BendBuilder.FixedSideOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.BendOptions.BendReliefTypeOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.BendOptions.BendReliefTypeOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.BendOptions.CornerReliefTypeOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.BendOptions.CornerReliefTypeOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.BendTaperBuilder.BendTaperInputMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.BendTaperBuilder.BendTaperInputMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.BendTaperBuilder.BendTaperSides
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.BendTaperBuilder.BendTaperSides
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.BendTaperBuilder.BendTaperType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.BendTaperBuilder.BendTaperType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.BendTaperBuilder.ChainingType
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.BendTaperBuilder.ChainingType
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.BendTaperBuilder.StartType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.BendTaperBuilder.StartType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.BendTaperBuilder.WebTaperType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.BendTaperBuilder.WebTaperType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.BreakCornerBuilder.TypeOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.BreakCornerBuilder.TypeOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.BridgeTransitionBuilder.InsetOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.BridgeTransitionBuilder.InsetOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.BridgeTransitionBuilder.TypeOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.BridgeTransitionBuilder.TypeOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.BridgeTransitionBuilder.WidthDirectionOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.BridgeTransitionBuilder.WidthDirectionOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.BridgeTransitionBuilder.WidthOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.BridgeTransitionBuilder.WidthOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.ClosedCornerBuilder.ClosureTypeOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.ClosedCornerBuilder.ClosureTypeOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.ClosedCornerBuilder.OriginTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.ClosedCornerBuilder.OriginTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.ClosedCornerBuilder.TreatmentTypeOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.ClosedCornerBuilder.TreatmentTypeOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.ClosedCornerBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.ClosedCornerBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.ContourFlangeBuilder.SectionSideOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.ContourFlangeBuilder.SectionSideOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.ContourFlangeBuilder.SweepSideOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.ContourFlangeBuilder.SweepSideOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.ContourFlangeBuilder.SweepTypeOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.ContourFlangeBuilder.SweepTypeOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.ConvertToSheetmetalBuilder.BendReliefTypeOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.ConvertToSheetmetalBuilder.BendReliefTypeOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.CornerTreatmentBuilder.CornerTreatmentType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.CornerTreatmentBuilder.CornerTreatmentType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.DimpleBuilder.DepthTypeOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.DimpleBuilder.DepthTypeOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.DimpleBuilder.DimensionTypeOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.DimpleBuilder.DimensionTypeOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.DimpleBuilder.SectionSideOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.DimpleBuilder.SectionSideOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.DimpleBuilder.SidewallTypeOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.DimpleBuilder.SidewallTypeOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.DrawnCutoutBuilder.DepthTypeOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.DrawnCutoutBuilder.DepthTypeOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.DrawnCutoutBuilder.SectionSideOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.DrawnCutoutBuilder.SectionSideOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.DrawnCutoutBuilder.SidewallTypeOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.DrawnCutoutBuilder.SidewallTypeOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.EditCornerBuilder.BendClosureTypeOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.EditCornerBuilder.BendClosureTypeOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.EditCornerBuilder.CornerReliefTypeOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.EditCornerBuilder.CornerReliefTypeOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.EditCornerBuilder.PlateClosureTypeOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.EditCornerBuilder.PlateClosureTypeOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.ExportFlatPatternBuilder.DxfRevisionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.ExportFlatPatternBuilder.DxfRevisionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.ExportFlatPatternBuilder.FileType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.ExportFlatPatternBuilder.FileType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.FeatureProperty
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.FeatureProperty
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.FlangeBuilder.InsetTypeOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.FlangeBuilder.InsetTypeOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.FlangeBuilder.LengthTypeOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.FlangeBuilder.LengthTypeOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.FlangeBuilder.MatchFaceOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.FlangeBuilder.MatchFaceOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.FlangeBuilder.OffsetTypeOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.FlangeBuilder.OffsetTypeOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.FlangeBuilder.WidthTypeOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.FlangeBuilder.WidthTypeOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.FlatSolidBuilder.TransformComponentsOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.FlatSolidBuilder.TransformComponentsOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.FlexibleCableBuilder.BendAngleDirectionOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.FlexibleCableBuilder.BendAngleDirectionOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.FlexibleCableBuilder.PathAdjustmentAngleDirectionOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.FlexibleCableBuilder.PathAdjustmentAngleDirectionOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.FlexibleCableBuilder.SegmentTypeOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.FlexibleCableBuilder.SegmentTypeOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.GussetBuilder.PlacementTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.GussetBuilder.PlacementTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.GussetBuilder.Shapes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.GussetBuilder.Shapes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.GussetBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.GussetBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.GussetBuilder.WidthSides
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.GussetBuilder.WidthSides
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.HemFlangeBuilder.BendReliefOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.HemFlangeBuilder.BendReliefOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.HemFlangeBuilder.InsetTypeOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.HemFlangeBuilder.InsetTypeOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.HemFlangeBuilder.TypeOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.HemFlangeBuilder.TypeOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.JogBuilder.BendLocationOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.JogBuilder.BendLocationOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.JogBuilder.DimensionTypeOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.JogBuilder.DimensionTypeOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.JogBuilder.DirectionTypeOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.JogBuilder.DirectionTypeOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.JogBuilder.FixedSideOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.JogBuilder.FixedSideOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.LoftedFlangeBuilder.SectionSideOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.LoftedFlangeBuilder.SectionSideOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.LouverBuilder.DepthSideOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.LouverBuilder.DepthSideOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.LouverBuilder.EndTypeOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.LouverBuilder.EndTypeOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.LouverBuilder.SectionSideOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.LouverBuilder.SectionSideOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.MiterOptions.ClosedCornerTypeOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.MiterOptions.ClosedCornerTypeOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.MiterOptions.PositionOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.MiterOptions.PositionOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.MiterOptions.TypeOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.MiterOptions.TypeOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.NormalCutoutBuilder.CutTypeOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.NormalCutoutBuilder.CutTypeOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.NormalCutoutBuilder.DepthSideOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.NormalCutoutBuilder.DepthSideOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.NormalCutoutBuilder.DepthTypeOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.NormalCutoutBuilder.DepthTypeOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.NormalCutoutBuilder.SectionSideOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.NormalCutoutBuilder.SectionSideOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.NormalCutoutBuilder.TypeOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.NormalCutoutBuilder.TypeOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.ResizeBendRadiusBuilder.BendReliefTypeOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.ResizeBendRadiusBuilder.BendReliefTypeOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.ResizeBendRadiusBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.ResizeBendRadiusBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.SheetmetalBendState
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.SheetmetalBendState
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.SheetmetalFaceLayer
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.SheetmetalFaceLayer
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.SheetmetalFaceType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.SheetmetalFaceType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.SheetmetalManagerFlangeWidthOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.SheetmetalManagerFlangeWidthOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.SheetmetalManagerTabSweepDir
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.SheetmetalManagerTabSweepDir
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.SheetmetalManagerTabType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.SheetmetalManagerTabType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.SMBoundaryConditionBuilder.ConstraintTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.SMBoundaryConditionBuilder.ConstraintTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.SolidPunchBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.SolidPunchBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.TabBuilder.SectionSideOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.TabBuilder.SectionSideOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.TabBuilder.ThicknessSideOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.TabBuilder.ThicknessSideOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.ThreeBendCornerBuilder.OriginTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.ThreeBendCornerBuilder.OriginTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.sheetmetal.ThreeBendCornerBuilder.TreatmentTypeOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.sheetmetal.ThreeBendCornerBuilder.TreatmentTypeOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.ShelfBuilder.DepthMethods
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.ShelfBuilder.DepthMethods
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.ShelfBuilder.LengthMethods
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.ShelfBuilder.LengthMethods
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.ShelfBuilder.ReferenceType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.ShelfBuilder.ReferenceType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.ShelfBuilder.StepMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.ShelfBuilder.StepMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.ShelfBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.ShelfBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.AlongGuideCutBuilder.CreationMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.AlongGuideCutBuilder.CreationMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.AlongGuideCutBuilder.WaterStopOffsetMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.AlongGuideCutBuilder.WaterStopOffsetMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.BuiltUpManModeBuilder.BuiltUpManModeType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.BuiltUpManModeBuilder.BuiltUpManModeType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.BulkHeadsBuilder.BulkheadType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.BulkHeadsBuilder.BulkheadType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.CompareModeBuilder.CompareMode
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.CompareModeBuilder.CompareMode
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.CopyObjectsBuilder.Type
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.CopyObjectsBuilder.Type
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.CornerCutBuilder.CutOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.CornerCutBuilder.CutOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.CustomBracketBuilder.CreationMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.CustomBracketBuilder.CreationMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.Cutout2Builder.CreationMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.Cutout2Builder.CreationMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.CuttingSideFacesBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.CuttingSideFacesBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.DeckBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.DeckBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.DeckListItemBuilder.DatumDir
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.DeckListItemBuilder.DatumDir
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.DisplaySolidBuilder.DisplayOptionTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.DisplaySolidBuilder.DisplayOptionTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.EdgeCutBuilder.ArraySpacing
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.EdgeCutBuilder.ArraySpacing
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.EdgeCutBuilder.VersionID
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.EdgeCutBuilder.VersionID
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.EdgeReinforcementBuilder.EndCutTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.EdgeReinforcementBuilder.EndCutTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.EdgeReinforcementBuilder.OrientationMethods
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.EdgeReinforcementBuilder.OrientationMethods
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.EdgeReinforcementBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.EdgeReinforcementBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.EndCutBuilder.ConnectionTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.EndCutBuilder.ConnectionTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.EndCutBuilder.DraftTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.EndCutBuilder.DraftTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.EndCutBuilder.LimitTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.EndCutBuilder.LimitTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.EndCutBuilder.SelectionTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.EndCutBuilder.SelectionTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.ExamineSteelFeatureBuilderCheck
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.ExamineSteelFeatureBuilderCheck
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.ExamineSteelFeatureBuilderResult
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.ExamineSteelFeatureBuilderResult
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.ExcessMaterialBuilder.Offset
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.ExcessMaterialBuilder.Offset
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.ExcessMaterialBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.ExcessMaterialBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.ExcessMaterialBuilder.VersionID
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.ExcessMaterialBuilder.VersionID
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.FeatureParmsBuilder.OrientationAngleRuleTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.FeatureParmsBuilder.OrientationAngleRuleTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.FeaturesBatchOperationBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.FeaturesBatchOperationBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.GenericPlateSystemBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.GenericPlateSystemBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.HullBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.HullBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.InsertFramesBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.InsertFramesBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.InverseBendingLinesBuilder.MeasureType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.InverseBendingLinesBuilder.MeasureType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.InverseBendingLinesBuilder.MethodType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.InverseBendingLinesBuilder.MethodType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.InverseBendingLinesBuilder.NeutralMethodType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.InverseBendingLinesBuilder.NeutralMethodType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.InverseBendingLinesBuilder.ReferencePlaneType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.InverseBendingLinesBuilder.ReferencePlaneType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.LongitudinalBulkheadBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.LongitudinalBulkheadBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.ManufacturingPreparationBuilder.AttributeType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.ManufacturingPreparationBuilder.AttributeType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.ManufacturingStockBuilder.CheckBoxStatus
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.ManufacturingStockBuilder.CheckBoxStatus
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.ManufacturingStockBuilder.LockedStatus
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.ManufacturingStockBuilder.LockedStatus
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.ManufacturingStockBuilder.ObjectType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.ManufacturingStockBuilder.ObjectType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.ManufacturingStockBuilder.StockDataSourceType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.ManufacturingStockBuilder.StockDataSourceType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.MaterialEstimationBuilder.SelectionMethods
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.MaterialEstimationBuilder.SelectionMethods
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.OrientationAngleMethodsBuilder.AlignAtTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.OrientationAngleMethodsBuilder.AlignAtTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.OrientationAngleMethodsBuilder.MethodTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.OrientationAngleMethodsBuilder.MethodTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.OrientationDefinitionBuilder.MeasureAngleTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.OrientationDefinitionBuilder.MeasureAngleTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.OrientationDefinitionBuilder.PlacementSideTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.OrientationDefinitionBuilder.PlacementSideTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.OrientationPointMethodsBuilder.MeasureAlongTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.OrientationPointMethodsBuilder.MeasureAlongTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.OrientationPointMethodsBuilder.PointMethodTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.OrientationPointMethodsBuilder.PointMethodTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.OrientationRegionItemBuilder.OrientationMethodTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.OrientationRegionItemBuilder.OrientationMethodTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.PenetrationRequest.CompensationType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.PenetrationRequest.CompensationType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.PenetrationRequest.CoutoutType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.PenetrationRequest.CoutoutType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.PenetrationRequest.DirectionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.PenetrationRequest.DirectionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.PenetrationRequest.PenetrationType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.PenetrationRequest.PenetrationType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.PenetrationRequest.RequestType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.PenetrationRequest.RequestType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.PenetrationRequestBuilder.RequestDialogType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.PenetrationRequestBuilder.RequestDialogType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.PenetrationUtils.Referencetype
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.PenetrationUtils.Referencetype
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.PenetrationUtils.RequestState
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.PenetrationUtils.RequestState
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.PillarBuilder.CapOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.PillarBuilder.CapOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.PillarBuilder.CreationMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.PillarBuilder.CreationMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.PillarBuilder.EndCutTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.PillarBuilder.EndCutTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.PillarBuilder.EndTreatmentTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.PillarBuilder.EndTreatmentTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.PillarBuilder.EndTypeOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.PillarBuilder.EndTypeOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.PillarBuilder.StockSectionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.PillarBuilder.StockSectionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.PillarSystemBuilder.StockSectionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.PillarSystemBuilder.StockSectionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.PillarSystemBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.PillarSystemBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.PlateBuilder.BodyTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.PlateBuilder.BodyTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.PlateBuilder.RegionOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.PlateBuilder.RegionOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.PlateBuilder.TightnessOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.PlateBuilder.TightnessOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.PlateBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.PlateBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.PlateChamferBuilder.AngleMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.PlateChamferBuilder.AngleMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.PlateChamferBuilder.OffsetMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.PlateChamferBuilder.OffsetMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.PlateChamferBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.PlateChamferBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.PlateStockBuilder.ThickenOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.PlateStockBuilder.ThickenOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.PlateStockBuilder.ThicknessSourceOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.PlateStockBuilder.ThicknessSourceOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.PlateSystemBuilder.StiffenerDirectionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.PlateSystemBuilder.StiffenerDirectionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.ProfileBuilder.Alignment
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.ProfileBuilder.Alignment
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.ProfileBuilder.EndCutOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.ProfileBuilder.EndCutOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.ProfileBuilder.OrientationOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.ProfileBuilder.OrientationOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.ProfileBuilder.SectionOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.ProfileBuilder.SectionOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.ProfileBuilder.TypeOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.ProfileBuilder.TypeOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.ProfileCutoutBuilder.Orientation
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.ProfileCutoutBuilder.Orientation
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.ProfileTransitionBuilder.FeatureModeType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.ProfileTransitionBuilder.FeatureModeType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.ProfileTransitionBuilder.MisalignedModeType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.ProfileTransitionBuilder.MisalignedModeType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.RollingLineBuilder.ConstructionMethodTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.RollingLineBuilder.ConstructionMethodTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.RollingLineBuilder.StartEvaluationTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.RollingLineBuilder.StartEvaluationTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.RollingLineBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.RollingLineBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.SeamBlockBuilder.SeamType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.SeamBlockBuilder.SeamType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.SeamBuilder.DefinitionMethods
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.SeamBuilder.DefinitionMethods
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.SeamBuilder.StaggerShiftAlongMethods
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.SeamBuilder.StaggerShiftAlongMethods
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.SeamBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.SeamBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.SectionDrawingBuilder.SectionsPerDrawingOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.SectionDrawingBuilder.SectionsPerDrawingOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.SectionDrawingBuilder.ViewsPerSheetOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.SectionDrawingBuilder.ViewsPerSheetOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.SectionViewBuilder.DirectionOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.SectionViewBuilder.DirectionOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.SectionViewBuilder.PlaneTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.SectionViewBuilder.PlaneTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.SectionViewBuilder.SectionRuleOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.SectionViewBuilder.SectionRuleOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.SetModeBuilder.DesMfgMode
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.SetModeBuilder.DesMfgMode
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.ShellTemplateBuilder.MarkingTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.ShellTemplateBuilder.MarkingTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.ShellTemplateBuilder.PlaneLocationTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.ShellTemplateBuilder.PlaneLocationTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.ShellTemplateBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.ShellTemplateBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.ShipCoordinatesBuilder.Selection
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.ShipCoordinatesBuilder.Selection
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.ShipCoordinatesBuilder.XDirectionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.ShipCoordinatesBuilder.XDirectionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.ShipCoordinatesBuilder.YDirectionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.ShipCoordinatesBuilder.YDirectionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.ShipCoordinatesBuilder.ZDirectionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.ShipCoordinatesBuilder.ZDirectionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.ShipCutoutBuilder.CreationMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.ShipCutoutBuilder.CreationMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.ShipDesignPreferencesBuilder.AngleRuleTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.ShipDesignPreferencesBuilder.AngleRuleTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.ShipDesignPreferencesBuilder.ColorType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.ShipDesignPreferencesBuilder.ColorType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.ShipDesignPreferencesBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.ShipDesignPreferencesBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.ShipEndCutBuilder.CreationMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.ShipEndCutBuilder.CreationMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.ShipFeatureConverter.PartScope
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.ShipFeatureConverter.PartScope
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.ShipIntersectionsBuilder.CreationType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.ShipIntersectionsBuilder.CreationType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.ShipIntersectionsBuilder.Type
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.ShipIntersectionsBuilder.Type
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.ShipnameFieldBuilderType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.ShipnameFieldBuilderType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.ShipnamesBuilderType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.ShipnamesBuilderType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.ShipSectionBuilder.Type
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.ShipSectionBuilder.Type
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.ShipSectionBuilder.XFilter
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.ShipSectionBuilder.XFilter
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.ShipSectionBuilder.ZFilter
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.ShipSectionBuilder.ZFilter
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.SplitProfilePlateBuilder.ProfileType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.SplitProfilePlateBuilder.ProfileType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.SplitProfilePlateBuilder.SplitDirectionOptionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.SplitProfilePlateBuilder.SplitDirectionOptionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.SplitProfilePlateBuilder.ToolOptionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.SplitProfilePlateBuilder.ToolOptionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.SplitStandardPartBuilder.ToolTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.SplitStandardPartBuilder.ToolTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.StandardPartFrameworkBuilder.CreationType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.StandardPartFrameworkBuilder.CreationType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.StandardPartFrameworkBuilder.SmartRuleStage
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.StandardPartFrameworkBuilder.SmartRuleStage
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.StandardPartItemBuilder.Direction
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.StandardPartItemBuilder.Direction
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.SteelDistributionBuilder.SaForm
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.SteelDistributionBuilder.SaForm
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.SteelDistributionBuilder.SaMaterial
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.SteelDistributionBuilder.SaMaterial
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.SteelDistributionBuilder.SaName
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.SteelDistributionBuilder.SaName
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.SteelDistributionBuilder.SaSize
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.SteelDistributionBuilder.SaSize
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.SteelDistributionBuilder.SaType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.SteelDistributionBuilder.SaType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.StiffenerBuilder.AttachmentOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.StiffenerBuilder.AttachmentOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.StiffenerBuilder.EdgeReinforcementAlignmentMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.StiffenerBuilder.EdgeReinforcementAlignmentMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.StiffenerBuilder.EdgeReinforcementPlacementMethods
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.StiffenerBuilder.EdgeReinforcementPlacementMethods
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.StiffenerBuilder.EndCutTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.StiffenerBuilder.EndCutTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.StiffenerBuilder.KnuckleOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.StiffenerBuilder.KnuckleOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.StiffenerBuilder.MountingMethods
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.StiffenerBuilder.MountingMethods
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.StiffenerBuilder.OrientationMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.StiffenerBuilder.OrientationMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.StiffenerBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.StiffenerBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.StiffenerBySupportPathBuilder.AlignedTo
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.StiffenerBySupportPathBuilder.AlignedTo
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.StiffenerBySupportPathBuilder.Method
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.StiffenerBySupportPathBuilder.Method
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.StiffenerBySupportPathBuilder.Scenario
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.StiffenerBySupportPathBuilder.Scenario
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.StiffenerLimitBuilder.LimitType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.StiffenerLimitBuilder.LimitType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.StiffenerStockBuilder.StockSectionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.StiffenerStockBuilder.StockSectionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.StiffenerSystemBuilder.EndCutTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.StiffenerSystemBuilder.EndCutTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.StiffenerSystemBuilder.MeasureAlongModes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.StiffenerSystemBuilder.MeasureAlongModes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.StiffenerSystemBuilder.MountingMethods
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.StiffenerSystemBuilder.MountingMethods
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.StiffenerSystemBuilder.OffsetSpacingModes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.StiffenerSystemBuilder.OffsetSpacingModes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.StiffenerSystemBuilder.OrientationMethods
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.StiffenerSystemBuilder.OrientationMethods
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.StiffenerSystemBuilder.PointMethods
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.StiffenerSystemBuilder.PointMethods
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.StiffenerSystemBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.StiffenerSystemBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.SubSystemsBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.SubSystemsBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.ThicknessDirectionBuilder.ThicknessDirectionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.ThicknessDirectionBuilder.ThicknessDirectionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.TraceLinesBuilder.TraceLineType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.TraceLinesBuilder.TraceLineType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.TransitionBuilder.TransitionMethods
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.TransitionBuilder.TransitionMethods
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.TransitionBuilder.TransitionTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.TransitionBuilder.TransitionTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.TransverseBulkheadBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.TransverseBulkheadBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.UpdateShipLibraryBuilder.ShipLibAssemblyOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.UpdateShipLibraryBuilder.ShipLibAssemblyOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.UpdateShipLibraryBuilder.ShipLibOptionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.UpdateShipLibraryBuilder.ShipLibOptionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.VentilationHoles2Builder.ArraySpacing
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.VentilationHoles2Builder.ArraySpacing
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.VerifyPenetrationBuilder.SelectionDialogType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.VerifyPenetrationBuilder.SelectionDialogType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.WeightAndCGBuilder.SelectionMethods
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.WeightAndCGBuilder.SelectionMethods
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.WeldCut2Builder.CreationMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.WeldCut2Builder.CreationMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.shipdesign.WeldCutBuilder.CreationMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.shipdesign.WeldCutBuilder.CreationMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.SilhouetteFlangeBuilder.OutputSurfaceOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.SilhouetteFlangeBuilder.OutputSurfaceOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.SilhouetteFlangeBuilder.ReferenceDirectionOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.SilhouetteFlangeBuilder.ReferenceDirectionOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.SilhouetteFlangeBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.SilhouetteFlangeBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.SketchConversionStatus.ReasonType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.SketchConversionStatus.ReasonType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.SketchConversionStatus.Type
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.SketchConversionStatus.Type
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.SmoothSplineBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.SmoothSplineBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.SnipSurfaceBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.SnipSurfaceBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.SphereBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.SphereBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.StepBuilder.DepthMethods
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.StepBuilder.DepthMethods
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.StepBuilder.ReferenceBoundaryTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.StepBuilder.ReferenceBoundaryTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.StepBuilder.StepFaceMethods
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.StepBuilder.StepFaceMethods
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.StepBuilder.StepTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.StepBuilder.StepTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.StepBuilder.StepWallMethods
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.StepBuilder.StepWallMethods
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.StudioSplineBuilder.CurveOption
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.StudioSplineBuilder.CurveOption
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.StudioSplineBuilder.MatchKnotsType
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.StudioSplineBuilder.MatchKnotsType
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.StudioSplineBuilder.Method
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.StudioSplineBuilder.Method
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.StudioSplineBuilderEx.DrawingPlaneOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.StudioSplineBuilderEx.DrawingPlaneOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.StudioSplineBuilderEx.InputCurveOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.StudioSplineBuilderEx.InputCurveOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.StudioSplineBuilderEx.MatchKnotsTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.StudioSplineBuilderEx.MatchKnotsTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.StudioSplineBuilderEx.MovementMethodType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.StudioSplineBuilderEx.MovementMethodType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.StudioSplineBuilderEx.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.StudioSplineBuilderEx.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.StudioSplineBuilderEx.WCSOptionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.StudioSplineBuilderEx.WCSOptionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.StudioSurfaceBuilder.TransitionOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.StudioSurfaceBuilder.TransitionOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.StudioXformBuilder.AdvancedMethodType
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.StudioXformBuilder.AdvancedMethodType
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.StudioXformBuilder.FeatureType
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.StudioXformBuilder.FeatureType
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.StudioXformBuilder.InsertKnotDirectionType
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.StudioXformBuilder.InsertKnotDirectionType
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.StudioXformBuilder.PlanarizeDirectionType
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.StudioXformBuilder.PlanarizeDirectionType
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.StudioXformBuilder.PlanarizeMethodType
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.StudioXformBuilder.PlanarizeMethodType
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.StudioXformBuilder.PlanarizePlaneOptionType
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.StudioXformBuilder.PlanarizePlaneOptionType
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.StudioXformBuilder.RotatingPivotType
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.StudioXformBuilder.RotatingPivotType
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.StudioXformBuilder.RotationDirectionType
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.StudioXformBuilder.RotationDirectionType
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.StudioXformBuilder.ScalingCenterType
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.StudioXformBuilder.ScalingCenterType
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.StudioXformBuilder.ScalingDirectionType
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.StudioXformBuilder.ScalingDirectionType
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.StudioXformBuilder.TranslationDirectionType
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.StudioXformBuilder.TranslationDirectionType
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.StudioXformBuilder.Types
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.StudioXformBuilder.Types
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.StudioXformBuilderEx.AdvancedMethodOptionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.StudioXformBuilderEx.AdvancedMethodOptionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.StudioXformBuilderEx.AdvancedMethodType
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.StudioXformBuilderEx.AdvancedMethodType
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.StudioXformBuilderEx.ExtrationMethodType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.StudioXformBuilderEx.ExtrationMethodType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.StudioXformBuilderEx.FeatureType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.StudioXformBuilderEx.FeatureType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.StudioXformBuilderEx.InsertKnotDirectionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.StudioXformBuilderEx.InsertKnotDirectionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.StudioXformBuilderEx.InsertPoleType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.StudioXformBuilderEx.InsertPoleType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.StudioXformBuilderEx.MovementMethodType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.StudioXformBuilderEx.MovementMethodType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.StudioXformBuilderEx.PlanarizeDirectionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.StudioXformBuilderEx.PlanarizeDirectionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.StudioXformBuilderEx.PlanarizeMethodType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.StudioXformBuilderEx.PlanarizeMethodType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.StudioXformBuilderEx.PlanarizeProjectionPlaneType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.StudioXformBuilderEx.PlanarizeProjectionPlaneType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.StudioXformBuilderEx.PoleEditType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.StudioXformBuilderEx.PoleEditType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.StudioXformBuilderEx.PrincipalMovementDirectionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.StudioXformBuilderEx.PrincipalMovementDirectionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.StudioXformBuilderEx.PrincipalRotatingAxisType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.StudioXformBuilderEx.PrincipalRotatingAxisType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.StudioXformBuilderEx.PrincipalScalingDirectionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.StudioXformBuilderEx.PrincipalScalingDirectionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.StudioXformBuilderEx.ProportionalPoleControlType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.StudioXformBuilderEx.ProportionalPoleControlType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.StudioXformBuilderEx.RotatingAxisType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.StudioXformBuilderEx.RotatingAxisType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.StudioXformBuilderEx.RotatingPivotType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.StudioXformBuilderEx.RotatingPivotType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.StudioXformBuilderEx.ScalingCenterType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.StudioXformBuilderEx.ScalingCenterType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.StudioXformBuilderEx.ScalingDirectionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.StudioXformBuilderEx.ScalingDirectionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.StudioXformBuilderEx.SurfaceDirectionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.StudioXformBuilderEx.SurfaceDirectionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.StudioXformBuilderEx.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.StudioXformBuilderEx.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.StyledBlendBuilder.StyledBlendRadiusConstraintType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.StyledBlendBuilder.StyledBlendRadiusConstraintType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.StyledBlendBuilder.StyledBlendShapeControlType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.StyledBlendBuilder.StyledBlendShapeControlType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.StyledBlendBuilder.StyledBlendTrimMethodType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.StyledBlendBuilder.StyledBlendTrimMethodType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.StyledBlendBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.StyledBlendBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.StyledCornerBuilder.CurveControlTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.StyledCornerBuilder.CurveControlTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.StyledCornerBuilder.InteriorCurveTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.StyledCornerBuilder.InteriorCurveTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.StyledCornerBuilder.ShapeControlMethodsTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.StyledCornerBuilder.ShapeControlMethodsTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.StyledCornerBuilder.TrimAndSewMethodTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.StyledCornerBuilder.TrimAndSewMethodTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.StyledCornerBuilder.TrimCurveTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.StyledCornerBuilder.TrimCurveTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.StyledSweepBuilder.FixedStringOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.StyledSweepBuilder.FixedStringOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.StyledSweepBuilder.ScalingMethodOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.StyledSweepBuilder.ScalingMethodOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.StyledSweepBuilder.SectionOrientationOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.StyledSweepBuilder.SectionOrientationOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.StyledSweepBuilder.TransitionOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.StyledSweepBuilder.TransitionOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.StyledSweepBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.StyledSweepBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.subdivision.ExtractCagePolylineBuilder.InputCurveOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.subdivision.ExtractCagePolylineBuilder.InputCurveOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.subdivision.StartSymmetricModelingBuilder.MirrorProcedureOption
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.subdivision.StartSymmetricModelingBuilder.MirrorProcedureOption
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.subdivision.SubdivisionExtrudeCageBuilder.DirectionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.subdivision.SubdivisionExtrudeCageBuilder.DirectionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.subdivision.SubdivisionProjectCageBuilder.ModeOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.subdivision.SubdivisionProjectCageBuilder.ModeOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.subdivision.SubdivisionProjectCageBuilder.TargetTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.subdivision.SubdivisionProjectCageBuilder.TargetTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.subdivision.SubdivisionProjectCageBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.subdivision.SubdivisionProjectCageBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.subdivision.SubdivisionSetContinuityBuilder.ContinuityTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.subdivision.SubdivisionSetContinuityBuilder.ContinuityTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.subdivision.SubdivisionSplitFaceBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.subdivision.SubdivisionSplitFaceBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.subdivision.TransformCageData.FallOffMethodType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.subdivision.TransformCageData.FallOffMethodType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.subdivision.TransformCageData.MovementMethodType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.subdivision.TransformCageData.MovementMethodType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.subdivision.TransformCageData.ScalingMethodType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.subdivision.TransformCageData.ScalingMethodType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.subdivision.TransformCageData.TransformationMethodType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.subdivision.TransformCageData.TransformationMethodType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.subdivision.TransformCageData.WCSOptionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.subdivision.TransformCageData.WCSOptionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.SweptBuilder.InterpolationOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.SweptBuilder.InterpolationOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.SweptBuilder.SectionLocationTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.SweptBuilder.SectionLocationTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.SweptVolumeBuilder.SweepOrient
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.SweptVolumeBuilder.SweepOrient
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.SymmetricBuilder.PlaneOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.SymmetricBuilder.PlaneOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.TabNoteCfgBuilder.Refplane
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.TabNoteCfgBuilder.Refplane
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.TextBuilder.FontStyleOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.TextBuilder.FontStyleOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.TextBuilder.OnFacePlacementMethodOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.TextBuilder.OnFacePlacementMethodOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.TextBuilder.OrientationMethodOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.TextBuilder.OrientationMethodOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.TextBuilder.ScriptOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.TextBuilder.ScriptOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.TextBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.TextBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.ThroughCurveMeshBuilder.BodyPreferenceTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.ThroughCurveMeshBuilder.BodyPreferenceTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.ThroughCurveMeshBuilder.ConstructionMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.ThroughCurveMeshBuilder.ConstructionMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.ThroughCurveMeshBuilder.EmphasisType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.ThroughCurveMeshBuilder.EmphasisType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.ThroughCurvesBuilder.BodyPreferenceTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.ThroughCurvesBuilder.BodyPreferenceTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.ThroughCurvesBuilder.ConstructionMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.ThroughCurvesBuilder.ConstructionMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.ThroughCurvesBuilder.PatchTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.ThroughCurvesBuilder.PatchTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.ToolingBoxBuilder.RefCsysType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.ToolingBoxBuilder.RefCsysType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.ToolingBoxBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.ToolingBoxBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.TrimAndExtendBuilder.ArrowSideType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.TrimAndExtendBuilder.ArrowSideType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.TrimAndExtendBuilder.OperationType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.TrimAndExtendBuilder.OperationType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.TrimBodyBuilder.DirectionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.TrimBodyBuilder.DirectionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.TrimCurveBuilder.CurveEndOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.TrimCurveBuilder.CurveEndOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.TrimCurveBuilder.CurveExtensionTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.TrimCurveBuilder.CurveExtensionTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.TrimCurveBuilder.CurveTrimRegionOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.TrimCurveBuilder.CurveTrimRegionOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.TrimCurveBuilder.FirstBoundingObjectEndOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.TrimCurveBuilder.FirstBoundingObjectEndOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.TrimCurveBuilder.FirstBoundingObjectOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.TrimCurveBuilder.FirstBoundingObjectOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.TrimCurveBuilder.InteresectionDirectionOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.TrimCurveBuilder.InteresectionDirectionOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.TrimCurveBuilder.InteresectionMethods
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.TrimCurveBuilder.InteresectionMethods
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.TrimCurveBuilder.SecondBoundingObjectEndOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.TrimCurveBuilder.SecondBoundingObjectEndOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.TrimCurveBuilder.SecondBoundingObjectOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.TrimCurveBuilder.SecondBoundingObjectOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.TrimExtendBuilder.ArrowSideOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.TrimExtendBuilder.ArrowSideOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.TrimExtendBuilder.CreationTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.TrimExtendBuilder.CreationTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.TrimExtendBuilder.ExtensionMethods
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.TrimExtendBuilder.ExtensionMethods
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.TubeBuilder.Output
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.TubeBuilder.Output
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.UnsewBuilder.UnsewOutput
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.UnsewBuilder.UnsewOutput
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.UnsewBuilder.UnsewTool
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.UnsewBuilder.UnsewTool
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.VariableOffsetBuilder.MethodOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.VariableOffsetBuilder.MethodOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.AllAroundVisionBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.AllAroundVisionBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.AllAroundVisionBuilder.WindowTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.AllAroundVisionBuilder.WindowTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.BaseDataLoadingBuilder.LoadingType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.BaseDataLoadingBuilder.LoadingType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.BaseDataLoadingWheelBuilder.DataDefinitionOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.BaseDataLoadingWheelBuilder.DataDefinitionOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.BaseDataPassengerBuilder.SeatDirectionOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.BaseDataPassengerBuilder.SeatDirectionOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.BaseDataWheelBuilder.PositionDefinitionOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.BaseDataWheelBuilder.PositionDefinitionOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.BumperPendulumBuilder.RequirementsControlType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.BumperPendulumBuilder.RequirementsControlType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.BumperPendulumBuilder.VisualizationType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.BumperPendulumBuilder.VisualizationType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.CloseRangeCameraListItemBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.CloseRangeCameraListItemBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.CloseRangeDemoCylinderListItemBuilder.ValidateTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.CloseRangeDemoCylinderListItemBuilder.ValidateTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.CloseRangeVisibilityBuilder.EyePointOffsetTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.CloseRangeVisibilityBuilder.EyePointOffsetTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.CloseRangeVisibilityBuilder.EyePointTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.CloseRangeVisibilityBuilder.EyePointTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.CloseRangeVisibilityBuilder.PathPositionTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.CloseRangeVisibilityBuilder.PathPositionTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.CloseRangeVisibilityBuilder.PositionMethods
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.CloseRangeVisibilityBuilder.PositionMethods
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.CloseRangeVisibilityBuilder.PositionPaths
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.CloseRangeVisibilityBuilder.PositionPaths
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.CloseRangeVisibilityBuilder.RequirementsControlType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.CloseRangeVisibilityBuilder.RequirementsControlType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.CrashBarrierBuilder.CrossPositionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.CrashBarrierBuilder.CrossPositionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.CrashBarrierBuilder.OverlapSideType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.CrashBarrierBuilder.OverlapSideType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.CrashBarrierBuilder.PositionObjectType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.CrashBarrierBuilder.PositionObjectType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.CrashBarrierBuilder.RequirementsControlsControlType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.CrashBarrierBuilder.RequirementsControlsControlType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.CrashBarrierBuilder.ShapeType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.CrashBarrierBuilder.ShapeType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.CrashBarrierBuilder.SideOverlapSideType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.CrashBarrierBuilder.SideOverlapSideType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.CrashBarrierBuilder.SidePositionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.CrashBarrierBuilder.SidePositionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.DynamicCurbBuilder.MethodType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.DynamicCurbBuilder.MethodType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.DynamicCurbBuilder.PositionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.DynamicCurbBuilder.PositionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.DynamicCurbBuilder.RequirementsControlType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.DynamicCurbBuilder.RequirementsControlType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.DynamicCurbBuilder.VisualizationType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.DynamicCurbBuilder.VisualizationType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.DynamicCurbBuilder.WheelType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.DynamicCurbBuilder.WheelType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.GroundClearanceBuilder.PositionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.GroundClearanceBuilder.PositionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.GroundClearanceBuilder.RequirementControls
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.GroundClearanceBuilder.RequirementControls
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.GroundClearanceBuilder.SectionCurveType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.GroundClearanceBuilder.SectionCurveType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.GroundClearanceBuilder.SurfaceLengthType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.GroundClearanceBuilder.SurfaceLengthType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.GroundClearanceBuilder.VisualizationTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.GroundClearanceBuilder.VisualizationTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.GroundClearanceBuilder.WheelType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.GroundClearanceBuilder.WheelType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder.MeasurementMethodType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder.MeasurementMethodType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.HeadImpactBuilder.CalculationType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.HeadImpactBuilder.CalculationType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.HeadImpactBuilder.RequirementsControlType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.HeadImpactBuilder.RequirementsControlType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.InnerAngleBuilder.CalculationMethodType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.InnerAngleBuilder.CalculationMethodType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.InnerAngleBuilder.RequirementsControlType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.InnerAngleBuilder.RequirementsControlType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.InnerAngleBuilder.VisualizationType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.InnerAngleBuilder.VisualizationType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.InnerAngleBuilder.WheelSizeType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.InnerAngleBuilder.WheelSizeType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.ManikinBuilder.ClassificationType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.ManikinBuilder.ClassificationType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.ManikinBuilder.PositionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.ManikinBuilder.PositionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.ManikinBuilder.SAEPercentileType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.ManikinBuilder.SAEPercentileType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.ManikinBuilder.StandardType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.ManikinBuilder.StandardType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.MirrorCertificationBuilder.DriverSideStandardsType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.MirrorCertificationBuilder.DriverSideStandardsType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.MirrorCertificationBuilder.EyeFromOptionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.MirrorCertificationBuilder.EyeFromOptionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.MirrorCertificationBuilder.EyellipsePercentileType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.MirrorCertificationBuilder.EyellipsePercentileType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.MirrorCertificationBuilder.EyeMethodType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.MirrorCertificationBuilder.EyeMethodType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.MirrorCertificationBuilder.EyePointMethodType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.MirrorCertificationBuilder.EyePointMethodType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.MirrorCertificationBuilder.InsideStandardsType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.MirrorCertificationBuilder.InsideStandardsType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.MirrorCertificationBuilder.InstructionFieldPositionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.MirrorCertificationBuilder.InstructionFieldPositionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.MirrorCertificationBuilder.InstructionFieldsType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.MirrorCertificationBuilder.InstructionFieldsType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.MirrorCertificationBuilder.LocationType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.MirrorCertificationBuilder.LocationType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.MirrorCertificationBuilder.MirrorOrientationType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.MirrorCertificationBuilder.MirrorOrientationType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.MirrorCertificationBuilder.MirrorSurfaceType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.MirrorCertificationBuilder.MirrorSurfaceType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.MirrorCertificationBuilder.PassengerSideStandardsType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.MirrorCertificationBuilder.PassengerSideStandardsType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.MirrorCertificationBuilder.ShowVisionConeType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.MirrorCertificationBuilder.ShowVisionConeType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.OilPanBuilder.PositionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.OilPanBuilder.PositionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.OilPanBuilder.RequirementsControlType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.OilPanBuilder.RequirementsControlType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.OilPanBuilder.VisualizationType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.OilPanBuilder.VisualizationType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.PedestrianProtectionBuilder.Font
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.PedestrianProtectionBuilder.Font
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.PedestrianProtectionBuilder.StandardType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.PedestrianProtectionBuilder.StandardType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.PedestrianProtectionBuilder.TransformMethods
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.PedestrianProtectionBuilder.TransformMethods
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.PedestrianProtectionBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.PedestrianProtectionBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.PedestrianProtectionBuilder.Wad
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.PedestrianProtectionBuilder.Wad
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.PedestrianProtectionBuilder.Width
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.PedestrianProtectionBuilder.Width
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.PendulumPlacementBuilder.LocationType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.PendulumPlacementBuilder.LocationType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.PendulumPlacementBuilder.PendulumProfileType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.PendulumPlacementBuilder.PendulumProfileType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.PendulumPlacementBuilder.PositionMethodType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.PendulumPlacementBuilder.PositionMethodType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.PendulumPlacementBuilder.SideType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.PendulumPlacementBuilder.SideType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.ReflectionDataBuilder.ResolutionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.ReflectionDataBuilder.ResolutionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.SeatBeltAnchorageBuilder.AnchorageLocationTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.SeatBeltAnchorageBuilder.AnchorageLocationTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.SeatBeltAnchorageBuilder.RoutingTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.SeatBeltAnchorageBuilder.RoutingTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.SeatBeltAnchorageBuilder.SeatPositionTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.SeatBeltAnchorageBuilder.SeatPositionTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.SeatBeltAnchorageBuilder.SeatTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.SeatBeltAnchorageBuilder.SeatTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.SeatBeltAnchorageBuilder.StandardTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.SeatBeltAnchorageBuilder.StandardTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.SlopeBuilder.PositionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.SlopeBuilder.PositionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.SlopeBuilder.RequirementsControlType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.SlopeBuilder.RequirementsControlType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.SlopeBuilder.VisualizationType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.SlopeBuilder.VisualizationType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.SlopeBuilder.WheelSizeType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.SlopeBuilder.WheelSizeType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.StaticCurbBuilder.PositionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.StaticCurbBuilder.PositionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.StaticCurbBuilder.RequirementsControlType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.StaticCurbBuilder.RequirementsControlType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.StaticCurbBuilder.VisualizationType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.StaticCurbBuilder.VisualizationType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.TireEnvelopeBuilder.DriverGraphOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.TireEnvelopeBuilder.DriverGraphOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.TireEnvelopeBuilder.EnvelopeOffsetMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.TireEnvelopeBuilder.EnvelopeOffsetMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.TireEnvelopeBuilder.MotionMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.TireEnvelopeBuilder.MotionMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.TireEnvelopeBuilder.SpindleFileLocationOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.TireEnvelopeBuilder.SpindleFileLocationOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.TireEnvelopeBuilder.SuspensionTemplateType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.TireEnvelopeBuilder.SuspensionTemplateType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.TireEnvelopeBuilder.TireDefinitionOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.TireEnvelopeBuilder.TireDefinitionOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.VehicleCoordinateSystemBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.VehicleCoordinateSystemBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.VisionPlaneBuilder.CustomVisionAngle
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.VisionPlaneBuilder.CustomVisionAngle
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.VisionPlaneBuilder.EnumEyeType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.VisionPlaneBuilder.EnumEyeType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.WheelCoveringBuilder.PositionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.WheelCoveringBuilder.PositionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.WheelCoveringBuilder.RequirementsControlType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.WheelCoveringBuilder.RequirementsControlType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.WheelCoveringBuilder.SurfacePlaneType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.WheelCoveringBuilder.SurfacePlaneType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.WheelCoveringBuilder.SurfaceSectionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.WheelCoveringBuilder.SurfaceSectionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.WheelFixingBuilder.ObjectPositionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.WheelFixingBuilder.ObjectPositionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.WheelFixingBuilder.PositionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.WheelFixingBuilder.PositionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.WheelFixingBuilder.RequirementsControlType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.WheelFixingBuilder.RequirementsControlType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.WheelFixingBuilder.ShapeType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.WheelFixingBuilder.ShapeType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.WheelFixingBuilder.WheelSizeType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.WheelFixingBuilder.WheelSizeType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.WindshieldDatumBuilder.CustomVisionAngle
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.WindshieldDatumBuilder.CustomVisionAngle
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.vehicledesign.WindshieldDatumBuilder.EnumEyeType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.vehicledesign.WindshieldDatumBuilder.EnumEyeType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.VirtualCurveBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.VirtualCurveBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.WaveDatumBuilder.ParentPartType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.WaveDatumBuilder.ParentPartType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.WaveLinkBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.WaveLinkBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.WavePointBuilder.ParentPartType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.WavePointBuilder.ParentPartType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.WrapBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.WrapBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.features.WrapGeometryBuilder.CloseGapType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.features.WrapGeometryBuilder.CloseGapType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.fields.DisplayPropertiesBuilder.DepDispTypeEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.fields.DisplayPropertiesBuilder.DepDispTypeEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.fields.DisplayPropertiesBuilder.DepDomColorEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.fields.DisplayPropertiesBuilder.DepDomColorEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.fields.DisplayPropertiesBuilder.DepLabelValueEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.fields.DisplayPropertiesBuilder.DepLabelValueEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.fields.DisplayPropertiesBuilder.DispResolutionEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.fields.DisplayPropertiesBuilder.DispResolutionEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.fields.DisplayPropertiesBuilder.IndepDomDispType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.fields.DisplayPropertiesBuilder.IndepDomDispType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.fields.DisplayPropertiesBuilder.LineFontEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.fields.DisplayPropertiesBuilder.LineFontEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.fields.DisplayPropertiesBuilder.LineWidthEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.fields.DisplayPropertiesBuilder.LineWidthEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.fields.DisplayPropertiesBuilder.TblPointTypeEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.fields.DisplayPropertiesBuilder.TblPointTypeEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.fields.DisplayPropertiesBuilder.ValuesEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.fields.DisplayPropertiesBuilder.ValuesEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.fields.FieldEvaluator.InterpolationEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.fields.FieldEvaluator.InterpolationEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.fields.FieldEvaluator.InverseDistanceWeightingEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.fields.FieldEvaluator.InverseDistanceWeightingEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.fields.FieldEvaluator.LinearLogOptionEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.fields.FieldEvaluator.LinearLogOptionEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.fields.FieldEvaluator.ValuesOutsideTableInterpolationEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.fields.FieldEvaluator.ValuesOutsideTableInterpolationEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.fields.FieldVariable.Type
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.fields.FieldVariable.Type
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.fields.FieldVariable.ValueType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.fields.FieldVariable.ValueType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.fields.SpatialMap.BoundingBoxMapEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.fields.SpatialMap.BoundingBoxMapEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.fields.SpatialMap.ParametricPlaneMapEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.fields.SpatialMap.ParametricPlaneMapEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.fields.SpatialMap.SubtypeEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.fields.SpatialMap.SubtypeEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.fields.SpatialMap.SubtypeMappingEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.fields.SpatialMap.SubtypeMappingEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.fields.SpatialMap.TypeEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.fields.SpatialMap.TypeEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.FileNewApplication
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.FileNewApplication
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.FileNewTemplateType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.FileNewTemplateType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.FollowFilletRuleType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.FollowFilletRuleType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.FontCollection.Type
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.FontCollection.Type
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.formboard.FlipComponentBuilder.AxisType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.formboard.FlipComponentBuilder.AxisType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.formboard.FormboardLayoutBuilder.BranchAngle
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.formboard.FormboardLayoutBuilder.BranchAngle
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.formboard.FormboardLayoutBuilder.BranchShape
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.formboard.FormboardLayoutBuilder.BranchShape
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.formboard.FormboardLayoutBuilder.MainRunType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.formboard.FormboardLayoutBuilder.MainRunType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.formboard.LayoutLengthOptions.RoundingMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.formboard.LayoutLengthOptions.RoundingMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.formboard.ObjectAttributeReferenceBuilder.LeaderType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.formboard.ObjectAttributeReferenceBuilder.LeaderType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.formboard.OrientBranchBuilder.BranchAngleMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.formboard.OrientBranchBuilder.BranchAngleMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.formboard.UpdateDiscrepancy.ObjectType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.formboard.UpdateDiscrepancy.ObjectType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.formboard.UpdateDiscrepancy.Type
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.formboard.UpdateDiscrepancy.Type
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.gateway.CopyCutBuilder.Status
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.gateway.CopyCutBuilder.Status
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.gateway.ImageCaptureBuilder.CaptureMethodType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.gateway.ImageCaptureBuilder.CaptureMethodType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.gateway.ImageCaptureBuilder.ImageFormat
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.gateway.ImageCaptureBuilder.ImageFormat
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.gateway.ImageCaptureBuilder.ImageSize
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.gateway.ImageCaptureBuilder.ImageSize
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.GenericMeasure.Type
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.GenericMeasure.Type
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricanalysis.CurveAnalysisCombsBuilder.DirectionOptionType
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricanalysis.CurveAnalysisCombsBuilder.DirectionOptionType
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricanalysis.CurveAnalysisDisplay.ShowFlagType
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricanalysis.CurveAnalysisDisplay.ShowFlagType
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricanalysis.CurveAnalysisInflectionsBuilder.DirectionOptionType
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricanalysis.CurveAnalysisInflectionsBuilder.DirectionOptionType
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricanalysis.CurveAnalysisPeaksBuilder.DirectionOptionType
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricanalysis.CurveAnalysisPeaksBuilder.DirectionOptionType
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricanalysis.CurveAnalysisRecord.DirectionOptionType
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricanalysis.CurveAnalysisRecord.DirectionOptionType
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder.CalculationMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder.CalculationMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder.DisplayStyle
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder.DisplayStyle
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder.LabelValues
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder.LabelValues
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder.NeedleDirection
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder.NeedleDirection
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder.ProjectionTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder.ProjectionTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder.XyzTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder.XyzTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricanalysis.DeviationChecking.DeviationOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricanalysis.DeviationChecking.DeviationOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricanalysis.DeviationChecking.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricanalysis.DeviationChecking.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricanalysis.DeviationGaugeBuilder.AdditionalValuesLabelType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricanalysis.DeviationGaugeBuilder.AdditionalValuesLabelType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricanalysis.DeviationGaugeBuilder.ColorPlotTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricanalysis.DeviationGaugeBuilder.ColorPlotTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricanalysis.DeviationGaugeBuilder.MeasurementMethodType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricanalysis.DeviationGaugeBuilder.MeasurementMethodType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricanalysis.DeviationGaugeBuilder.MinMaxType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricanalysis.DeviationGaugeBuilder.MinMaxType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricanalysis.DeviationGaugeBuilder.ReportingPerTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricanalysis.DeviationGaugeBuilder.ReportingPerTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricanalysis.DeviationGaugeBuilder.XyzDirectionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricanalysis.DeviationGaugeBuilder.XyzDirectionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricanalysis.DraftAnalysisBuilder.DrawDirection
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricanalysis.DraftAnalysisBuilder.DrawDirection
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricanalysis.DraftAnalysisBuilder.SelectOutput
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricanalysis.DraftAnalysisBuilder.SelectOutput
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricanalysis.ExamineGeometry.Check
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricanalysis.ExamineGeometry.Check
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder.CurvatureTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder.CurvatureTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder.DirectionTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder.DirectionTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder.DisplayTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder.DisplayTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder.ScaleTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder.ScaleTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricanalysis.GapFlushnessBuilder.DisplayOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricanalysis.GapFlushnessBuilder.DisplayOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricanalysis.GapFlushnessBuilder.EvaluationModes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricanalysis.GapFlushnessBuilder.EvaluationModes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricanalysis.GapFlushnessBuilder.EvaluationTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricanalysis.GapFlushnessBuilder.EvaluationTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricanalysis.GapFlushnessBuilder.PanelTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricanalysis.GapFlushnessBuilder.PanelTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricanalysis.GapFlushnessBuilder.SectionAlignments
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricanalysis.GapFlushnessBuilder.SectionAlignments
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricanalysis.GapFlushnessBuilder.SectionCurveOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricanalysis.GapFlushnessBuilder.SectionCurveOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricanalysis.GeometricProperties.Entity
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricanalysis.GeometricProperties.Entity
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricanalysis.GeometricProperties.OutputType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricanalysis.GeometricProperties.OutputType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricanalysis.GeometricProperties.Status
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricanalysis.GeometricProperties.Status
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricanalysis.HighlightLinesAnalysisBuilder.DisplayMethods
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricanalysis.HighlightLinesAnalysisBuilder.DisplayMethods
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricanalysis.HighlightLinesAnalysisBuilder.LightPlacements
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricanalysis.HighlightLinesAnalysisBuilder.LightPlacements
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricanalysis.HighlightLinesAnalysisBuilder.LightPlaneOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricanalysis.HighlightLinesAnalysisBuilder.LightPlaneOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricanalysis.HighlightLinesAnalysisBuilder.Resolutions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricanalysis.HighlightLinesAnalysisBuilder.Resolutions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricanalysis.HighlightLinesAnalysisBuilder.Types
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricanalysis.HighlightLinesAnalysisBuilder.Types
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricanalysis.HighlightLinesAnalysisBuilder.Types2
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricanalysis.HighlightLinesAnalysisBuilder.Types2
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricanalysis.sectionanalysis.RadialBuilder.RotationAxisType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricanalysis.sectionanalysis.RadialBuilder.RotationAxisType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricanalysis.sectionanalysis.SectionAnalysisBuilder.CalculationMethodType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricanalysis.sectionanalysis.SectionAnalysisBuilder.CalculationMethodType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricanalysis.sectionanalysis.SectionAnalysisBuilder.NeedleDirectionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricanalysis.sectionanalysis.SectionAnalysisBuilder.NeedleDirectionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricanalysis.sectionanalysis.SectionAnalysisBuilder.OutputType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricanalysis.sectionanalysis.SectionAnalysisBuilder.OutputType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricanalysis.sectionanalysis.SectionAnalysisBuilder.ScalingMethodType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricanalysis.sectionanalysis.SectionAnalysisBuilder.ScalingMethodType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricanalysis.sectionanalysis.SectionAnalysisBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricanalysis.sectionanalysis.SectionAnalysisBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricanalysis.sectionanalysis.SectionAnalysisExBuilder.AlignmentType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricanalysis.sectionanalysis.SectionAnalysisExBuilder.AlignmentType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricanalysis.sectionanalysis.SectionAnalysisExBuilder.CalculationMethodType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricanalysis.sectionanalysis.SectionAnalysisExBuilder.CalculationMethodType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricanalysis.sectionanalysis.SectionAnalysisExBuilder.NeedleDirectionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricanalysis.sectionanalysis.SectionAnalysisExBuilder.NeedleDirectionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricanalysis.sectionanalysis.SectionAnalysisExBuilder.OutputType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricanalysis.sectionanalysis.SectionAnalysisExBuilder.OutputType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricanalysis.sectionanalysis.SectionAnalysisExBuilder.PlacementType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricanalysis.sectionanalysis.SectionAnalysisExBuilder.PlacementType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricanalysis.sectionanalysis.SectionAnalysisExBuilder.ScalingMethodType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricanalysis.sectionanalysis.SectionAnalysisExBuilder.ScalingMethodType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricanalysis.sectionanalysis.SectionPlaneBuilder.PlaneType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricanalysis.sectionanalysis.SectionPlaneBuilder.PlaneType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricanalysis.SimpleInterference.FaceInterferenceMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricanalysis.SimpleInterference.FaceInterferenceMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricanalysis.SimpleInterference.InterferenceMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricanalysis.SimpleInterference.InterferenceMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricanalysis.SimpleInterference.Result
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricanalysis.SimpleInterference.Result
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricanalysis.SolidDensity.UnitsType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricanalysis.SolidDensity.UnitsType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricanalysis.SurfaceAnalysisDisplay.ShowFlagType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricanalysis.SurfaceAnalysisDisplay.ShowFlagType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricanalysis.SurfaceContinuityAnalysisBuilder.CurvatureType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricanalysis.SurfaceContinuityAnalysisBuilder.CurvatureType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricanalysis.SurfaceContinuityAnalysisBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricanalysis.SurfaceContinuityAnalysisBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricanalysis.SurfaceIntersectionBuilder.CalculationTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricanalysis.SurfaceIntersectionBuilder.CalculationTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricanalysis.SurfaceIntersectionBuilder.DirectionTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricanalysis.SurfaceIntersectionBuilder.DirectionTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricanalysis.SurfaceIntersectionBuilder.LabelValues
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricanalysis.SurfaceIntersectionBuilder.LabelValues
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricanalysis.SurfaceIntersectionBuilder.NormalTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricanalysis.SurfaceIntersectionBuilder.NormalTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricanalysis.SurfaceIntersectionBuilder.ProjectionTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricanalysis.SurfaceIntersectionBuilder.ProjectionTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricanalysis.SurfaceIntersectionBuilder.ScalingTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricanalysis.SurfaceIntersectionBuilder.ScalingTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricanalysis.SurfaceIntersectionBuilder.XyzTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricanalysis.SurfaceIntersectionBuilder.XyzTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.AlignmentMethodBuilder.AlignFillerSurfaceType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.AlignmentMethodBuilder.AlignFillerSurfaceType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.AlignmentMethodBuilder.Type
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.AlignmentMethodBuilder.Type
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.AlongPathPattern.PathOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.AlongPathPattern.PathOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.AlongPathPattern.YDirectionOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.AlongPathPattern.YDirectionOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.AlongSpineBuilder.RetainSpineOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.AlongSpineBuilder.RetainSpineOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.AngularPatternSpacing.UsePitchOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.AngularPatternSpacing.UsePitchOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.BlendSetbackBuilder.Directions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.BlendSetbackBuilder.Directions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.BlendStopshortBuilder.Choices
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.BlendStopshortBuilder.Choices
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.BooleanOperation.BooleanType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.BooleanOperation.BooleanType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.BooleanRegionSelect.KeepRemoveOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.BooleanRegionSelect.KeepRemoveOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.BooleanRegionSelect.SelectOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.BooleanRegionSelect.SelectOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.BooleanToolBuilder.BooleanToolType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.BooleanToolBuilder.BooleanToolType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.BoundingObjectBuilder.Method
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.BoundingObjectBuilder.Method
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.BridgeCurveConnectivity.CurveDirectionOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.BridgeCurveConnectivity.CurveDirectionOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.BridgeCurveConnectivity.FaceDirectionOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.BridgeCurveConnectivity.FaceDirectionOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.CircularFrameBuilder.Subtypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.CircularFrameBuilder.Subtypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.CircularPattern.StaggerOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.CircularPattern.StaggerOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.CombOptionsBuilder.AnalysisTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.CombOptionsBuilder.AnalysisTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.CombOptionsBuilder.LabelTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.CombOptionsBuilder.LabelTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.ConicCrossSection.DefineMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.ConicCrossSection.DefineMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.ConicCrossSection.DepthMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.ConicCrossSection.DepthMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.ConicCrossSection.OffsetMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.ConicCrossSection.OffsetMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.ConicCrossSection.RhoMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.ConicCrossSection.RhoMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.ConicCrossSection.ShapeSkewMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.ConicCrossSection.ShapeSkewMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.Continuity.ContinuityTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.Continuity.ContinuityTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.CurveExtendData.LimitOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.CurveExtendData.LimitOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.CurveExtensionBuilder.ExtensionOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.CurveExtensionBuilder.ExtensionOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.CurveFitData.Join
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.CurveFitData.Join
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.CurveFitData.Method
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.CurveFitData.Method
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.CurveFitJoin.JoinMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.CurveFitJoin.JoinMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.CurveFitOptions.FitMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.CurveFitOptions.FitMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.CurveOptions.InputCurve
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.CurveOptions.InputCurve
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.CurveRangeBuilder.AnchorPositionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.CurveRangeBuilder.AnchorPositionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.CurveShapingBuilder.InsertionMethodOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.CurveShapingBuilder.InsertionMethodOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.CurveShapingBuilder.MovementMethodType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.CurveShapingBuilder.MovementMethodType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.CurveShapingBuilder.WCSOptionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.CurveShapingBuilder.WCSOptionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.EndHoleData.FormOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.EndHoleData.FormOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.EndHoleData.HoleDepthLimitOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.EndHoleData.HoleDepthLimitOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.EndHoleData.ThreadLengthOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.EndHoleData.ThreadLengthOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.EndHoleData.ThreadRotationOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.EndHoleData.ThreadRotationOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.EntityUsageInfo.Status
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.EntityUsageInfo.Status
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.Extend.ExtendType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.Extend.ExtendType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.ExtensionMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.ExtensionMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.ExtensionSide
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.ExtensionSide
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.FacePlaneSelectionBuilder.TrimObjectType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.FacePlaneSelectionBuilder.TrimObjectType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.FeatureOptions.BodyStyle
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.FeatureOptions.BodyStyle
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.FrameOnPathBuilder.AnchorLocationType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.FrameOnPathBuilder.AnchorLocationType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.FtmFixedCurvesBuilder.FixedCurvesContinuityType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.FtmFixedCurvesBuilder.FixedCurvesContinuityType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.FtmTransformCurvesBuilder.TransformCurvesContinuityType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.FtmTransformCurvesBuilder.TransformCurvesContinuityType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.GeneralPattern.FromLocationOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.GeneralPattern.FromLocationOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.GeometryLocationData.EntityTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.GeometryLocationData.EntityTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.HelixPattern.DirectionTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.HelixPattern.DirectionTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.HelixPattern.SizeOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.HelixPattern.SizeOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.LawBuilder.RetainLawCurveOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.LawBuilder.RetainLawCurveOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.LawBuilder.Type
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.LawBuilder.Type
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.MatchSurfaceBuilder.MatchConstaint
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.MatchSurfaceBuilder.MatchConstaint
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.MirrorPattern.PlaneOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.MirrorPattern.PlaneOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.ModlMotion.Delta
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.ModlMotion.Delta
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.ModlMotion.Options
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.ModlMotion.Options
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.MovePoleBuilder.MoveMethodType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.MovePoleBuilder.MoveMethodType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.MovePoleBuilder.WCSDirectionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.MovePoleBuilder.WCSDirectionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.MultiDraft.AngleOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.MultiDraft.AngleOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.OnPathDimensionBuilder.UpdateReason
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.OnPathDimensionBuilder.UpdateReason
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.OrientationMethodBuilder.OrientationOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.OrientationMethodBuilder.OrientationOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.OrientXpressBuilder.Axis
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.OrientXpressBuilder.Axis
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.OrientXpressBuilder.Plane
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.OrientXpressBuilder.Plane
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.OrientXpressBuilder.Reference
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.OrientXpressBuilder.Reference
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.ParentEquivalencyMap.Status
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.ParentEquivalencyMap.Status
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.ParentEquivalencyMap.Type
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.ParentEquivalencyMap.Type
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.PartModuleInputBuilder.ModifiableGeometryOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.PartModuleInputBuilder.ModifiableGeometryOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.PatternClocking.ClockingType
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.PatternClocking.ClockingType
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.PatternClockingBuilder.ClockingType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.PatternClockingBuilder.ClockingType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.PatternDefinition.PatternEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.PatternDefinition.PatternEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.PatternFill.PatternFillOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.PatternFill.PatternFillOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.PatternIncrementItem.OperationEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.PatternIncrementItem.OperationEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.PatternOrientation.Enum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.PatternOrientation.Enum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.PatternOrientation.ProjDirEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.PatternOrientation.ProjDirEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.PatternSpacing.SpacingType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.PatternSpacing.SpacingType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.PointSetAlignmentBuilder.ConstraintOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.PointSetAlignmentBuilder.ConstraintOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.PointsFromFileBuilder.Options
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.PointsFromFileBuilder.Options
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.PolygonPattern.SizeOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.PolygonPattern.SizeOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.ProjectionOptions.DirectionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.ProjectionOptions.DirectionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.QuadrilateralFrameBuilder.Subtypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.QuadrilateralFrameBuilder.Subtypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.RadiusMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.RadiusMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.Rebuild.DegreeTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.Rebuild.DegreeTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.Rebuild.RebuildTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.Rebuild.RebuildTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.RectangularFrameBuilder.AnchorLocationType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.RectangularFrameBuilder.AnchorLocationType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.RectangularPattern.SimplifiedLayoutTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.RectangularPattern.SimplifiedLayoutTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.RectangularPattern.StaggerOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.RectangularPattern.StaggerOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.ReduceSurfaceRadiusBuilder.FaceSelectionSpecification
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.ReduceSurfaceRadiusBuilder.FaceSelectionSpecification
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.ReduceSurfaceRadiusBuilder.ReducedFaceTypeSpecification
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.ReduceSurfaceRadiusBuilder.ReducedFaceTypeSpecification
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.ReduceSurfaceRadiusBuilder.ReduceValueTypeSpecification
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.ReduceSurfaceRadiusBuilder.ReduceValueTypeSpecification
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.RefitControlBuilder.RefitControlDirection
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.RefitControlBuilder.RefitControlDirection
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.RefitControlBuilder.RefitControlMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.RefitControlBuilder.RefitControlMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.RegionTracker.ExtremityType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.RegionTracker.ExtremityType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.ScalingMethodBuilder.BlendingFunctionTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.ScalingMethodBuilder.BlendingFunctionTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.ScalingMethodBuilder.ScalingOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.ScalingMethodBuilder.ScalingOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.SelectDividingObjectBuilder.IsoparametricDirectionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.SelectDividingObjectBuilder.IsoparametricDirectionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.SelectDividingObjectBuilder.ToolType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.SelectDividingObjectBuilder.ToolType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.ShapeFrameBuilder.AnchorAttachmentType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.ShapeFrameBuilder.AnchorAttachmentType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.SimpleDraft.SimpleDraftType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.SimpleDraft.SimpleDraftType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.SmartVolumeProfileBuilder.CloseProfileRuleType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.SmartVolumeProfileBuilder.CloseProfileRuleType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.SpineDefinitionBuilder.MethodOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.SpineDefinitionBuilder.MethodOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.SpinePointData.ParameterType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.SpinePointData.ParameterType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.SpiralPattern.OrientType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.SpiralPattern.OrientType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.SpiralPattern.SpiralDefineSize
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.SpiralPattern.SpiralDefineSize
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.SplineExtensionBuilder.ExtensionOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.SplineExtensionBuilder.ExtensionOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.StartHoleData.HoleForms
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.StartHoleData.HoleForms
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.StepOptionBehavior.StepOptionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.StepOptionBehavior.StepOptionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.StyledSweepReferenceMethodBuilder.ReferenceOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.StyledSweepReferenceMethodBuilder.ReferenceOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.SupportPlaneData.LockPlaneStatus
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.SupportPlaneData.LockPlaneStatus
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.SurfaceRangeBuilder.AnchorPositionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.SurfaceRangeBuilder.AnchorPositionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.TransformerData.ObjectType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.TransformerData.ObjectType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.TransitionCurveBuilder.TangentDirections
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.TransitionCurveBuilder.TangentDirections
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.TriangularFrameBuilder.Subtypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.TriangularFrameBuilder.Subtypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.geometricutilities.Type
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.geometricutilities.Type
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.HumanData.AdvancedScalingType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.HumanData.AdvancedScalingType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.HumanData.DatabaseType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.HumanData.DatabaseType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.HumanData.EditDisplayBodyParts
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.HumanData.EditDisplayBodyParts
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.HumanData.GenderType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.HumanData.GenderType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.HumanData.HandFootType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.HumanData.HandFootType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.HumanData.HandGoalType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.HumanData.HandGoalType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.HumanData.InverseKinematicsBalanceType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.HumanData.InverseKinematicsBalanceType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.HumanData.InverseKinematicsBodyParts
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.HumanData.InverseKinematicsBodyParts
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.HumanData.InverseKinematicsHeadEyeType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.HumanData.InverseKinematicsHeadEyeType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.HumanData.InverseKinematicsInitJoint
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.HumanData.InverseKinematicsInitJoint
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.HumanData.InverseKinematicsType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.HumanData.InverseKinematicsType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.HumanData.JointType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.HumanData.JointType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.HumanData.ReferencePointType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.HumanData.ReferencePointType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.HumanData.SegmentScalingType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.HumanData.SegmentScalingType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.HumanData.SideType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.HumanData.SideType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.HumanData.StatureType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.HumanData.StatureType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.HumanData.StatureUnitType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.HumanData.StatureUnitType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.HumanData.WeightType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.HumanData.WeightType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.HumanData.WeightUnitType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.HumanData.WeightUnitType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.HumanHandShapeData.HandOpt
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.HumanHandShapeData.HandOpt
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.HumanPosturePredictionBuilder.CushionFirmnessType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.HumanPosturePredictionBuilder.CushionFirmnessType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.HumanPosturePredictionBuilder.OccupantType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.HumanPosturePredictionBuilder.OccupantType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.HumanPosturePredictionBuilder.PredictionMethodType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.HumanPosturePredictionBuilder.PredictionMethodType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.HumanPosturePredictionBuilder.SeatType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.HumanPosturePredictionBuilder.SeatType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.HumanPosturePredictionBuilder.SteeringWheelPedalType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.HumanPosturePredictionBuilder.SteeringWheelPedalType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.HumanPosturePredictionBuilder.TransmissionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.HumanPosturePredictionBuilder.TransmissionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.HumanPosturePredictionBuilder.VehicleType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.HumanPosturePredictionBuilder.VehicleType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.HumanReachZone.MethodType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.HumanReachZone.MethodType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.IgesCreator.CrossHatchMapEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.IgesCreator.CrossHatchMapEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.IgesCreator.CsysrefEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.IgesCreator.CsysrefEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.IgesCreator.ExportFromOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.IgesCreator.ExportFromOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.IgesCreator.MapRevolvedFacesOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.IgesCreator.MapRevolvedFacesOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.IgesImporter.CopiousDataEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.IgesImporter.CopiousDataEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.IgesImporter.ImportToEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.IgesImporter.ImportToEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.InferSnapType.SnapType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.InferSnapType.SnapType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.Information.DisplayFeatureType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.Information.DisplayFeatureType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.InterpartExpressionsBuilder.NamingRules
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.InterpartExpressionsBuilder.NamingRules
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.issue.IssueAttachment.Type
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.issue.IssueAttachment.Type
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.issue.IssueFolder.Type
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.issue.IssueFolder.Type
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.issue.IssueManager.Mode
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.issue.IssueManager.Mode
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.issue.IssueManager.State
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.issue.IssueManager.State
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.issue.IssueProperty.Type
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.issue.IssueProperty.Type
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.issue.SnapshotSubsetBuilder.ContextType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.issue.SnapshotSubsetBuilder.ContextType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.JtCreator.ChordalValue
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.JtCreator.ChordalValue
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.JtCreator.FileStructure
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.JtCreator.FileStructure
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.JtCreator.FileWrite
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.JtCreator.FileWrite
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.JtCreator.PmiOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.JtCreator.PmiOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.JtCreator.RefsetOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.JtCreator.RefsetOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.JtCreator.TessellationOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.JtCreator.TessellationOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.layer.Constants
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.layer.Constants
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.layer.State
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.layer.State
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.layout2d.Layout2dComponentMemberType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.layout2d.Layout2dComponentMemberType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.layout2d.Layout2dDefinitionLocation
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.layout2d.Layout2dDefinitionLocation
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.layout2d.Layout2dDefinitionStatus
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.layout2d.Layout2dDefinitionStatus
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.LayoutDefinition.ArrangementType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.LayoutDefinition.ArrangementType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.Light.SceneType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.Light.SceneType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.LightType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.LightType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.LineFontBuilder.LineFontType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.LineFontBuilder.LineFontType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.LineWidthOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.LineWidthOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.LinkedMirrorPartBuilder.MirrorCsysOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.LinkedMirrorPartBuilder.MirrorCsysOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.LinkedMirrorPartBuilder.MirrorPartTypeOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.LinkedMirrorPartBuilder.MirrorPartTypeOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.ListCreator.ResolutionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.ListCreator.ResolutionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.ListCreator.TessellationOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.ListCreator.TessellationOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.ListingWindow.DeviceType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.ListingWindow.DeviceType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.LoadOptions.BookmarkComponents
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.LoadOptions.BookmarkComponents
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.LoadOptions.BookmarkRefsets
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.LoadOptions.BookmarkRefsets
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.LoadOptions.LoadComponents
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.LoadOptions.LoadComponents
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.LoadOptions.LoadMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.LoadOptions.LoadMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.LoadOptions.ManagedModeLoadMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.LoadOptions.ManagedModeLoadMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.LoadOptions.Parent
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.LoadOptions.Parent
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.LoadOptions.UpdateSubsetOnLoad
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.LoadOptions.UpdateSubsetOnLoad
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.markup.Icon.Size
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.markup.Icon.Size
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.markup.Polyline.LineOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.markup.Polyline.LineOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.MassPropertiesBuilder.UpdateOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.MassPropertiesBuilder.UpdateOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.MaterialUtilities.StressStrainData
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.MaterialUtilities.StressStrainData
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.MeasureAngleBuilder.AngleType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.MeasureAngleBuilder.AngleType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.MeasureAngleBuilder.ObjectType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.MeasureAngleBuilder.ObjectType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.MeasureAngleBuilder.OrientationType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.MeasureAngleBuilder.OrientationType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.MeasureAngleBuilder.ProjectionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.MeasureAngleBuilder.ProjectionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.MeasureBodies.ActiveValue
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.MeasureBodies.ActiveValue
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.MeasureBodies.AnalysisUnit
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.MeasureBodies.AnalysisUnit
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.MeasureBuilder.AnnotationType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.MeasureBuilder.AnnotationType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.MeasureBuilder.RequirementType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.MeasureBuilder.RequirementType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.MeasureDistanceBuilder.DistanceType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.MeasureDistanceBuilder.DistanceType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.MeasureDistanceBuilder.MeasureType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.MeasureDistanceBuilder.MeasureType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.MeasureFaces.ActiveValue
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.MeasureFaces.ActiveValue
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.MeasureManager.EndpointType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.MeasureManager.EndpointType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.MeasureManager.ExtremeType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.MeasureManager.ExtremeType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.MeasureManager.MeasureType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.MeasureManager.MeasureType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.MeasureManager.ProjectionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.MeasureManager.ProjectionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.MeasureManager.RadialMeasureType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.MeasureManager.RadialMeasureType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.Measurement.DeviationReportType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.Measurement.DeviationReportType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.mechatronics.BreakingConstraintBuilder.BreakingModeType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.mechatronics.BreakingConstraintBuilder.BreakingModeType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.mechatronics.CamBuilder.AxisJointType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.mechatronics.CamBuilder.AxisJointType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.mechatronics.CamProfileBuilder.MasterValueUnit
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.mechatronics.CamProfileBuilder.MasterValueUnit
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.mechatronics.CamProfileBuilder.ProfileCyclicType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.mechatronics.CamProfileBuilder.ProfileCyclicType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.mechatronics.CamProfileBuilder.SlaveValueUnit
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.mechatronics.CamProfileBuilder.SlaveValueUnit
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.mechatronics.CollisionBodyBuilder.CollisionShapeTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.mechatronics.CollisionBodyBuilder.CollisionShapeTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.mechatronics.CollisionBodyBuilder.ShapePropertyTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.mechatronics.CollisionBodyBuilder.ShapePropertyTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.mechatronics.CollisionSensorBuilder.CollisionShapeTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.mechatronics.CollisionSensorBuilder.CollisionShapeTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.mechatronics.CollisionSensorBuilder.ShapePropertiesOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.mechatronics.CollisionSensorBuilder.ShapePropertiesOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.mechatronics.ComparisonResult.Category
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.mechatronics.ComparisonResult.Category
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.mechatronics.ComparisonResultContext.ResolveConflictAction
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.mechatronics.ComparisonResultContext.ResolveConflictAction
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.mechatronics.ComparisonResultElectricalPart.Status
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.mechatronics.ComparisonResultElectricalPart.Status
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.mechatronics.DisplayChangerBuilder.ExecuteModes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.mechatronics.DisplayChangerBuilder.ExecuteModes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.mechatronics.ExternalConnectionElementBuilder.ConditionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.mechatronics.ExternalConnectionElementBuilder.ConditionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.mechatronics.ExternalConnectionElementBuilder.DataType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.mechatronics.ExternalConnectionElementBuilder.DataType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.mechatronics.ExternalConnectionElementBuilder.StreamType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.mechatronics.ExternalConnectionElementBuilder.StreamType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.mechatronics.GanttOperationBuilder.OperationType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.mechatronics.GanttOperationBuilder.OperationType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.mechatronics.GanttOperationBuilder.SimpleOperationType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.mechatronics.GanttOperationBuilder.SimpleOperationType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.mechatronics.GanttOperationParameterBuilder.OperatorOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.mechatronics.GanttOperationParameterBuilder.OperatorOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.mechatronics.GearBuilder.AxisJointType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.mechatronics.GearBuilder.AxisJointType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.mechatronics.GraphControlBuilder.EndAction
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.mechatronics.GraphControlBuilder.EndAction
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.mechatronics.GraphControlBuilder.MasterJointType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.mechatronics.GraphControlBuilder.MasterJointType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.mechatronics.GraphControlBuilder.MasterValueUnit
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.mechatronics.GraphControlBuilder.MasterValueUnit
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.mechatronics.GraphControlBuilder.SlaveValueUnit
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.mechatronics.GraphControlBuilder.SlaveValueUnit
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.mechatronics.MechatronicsSession.SimulationAction
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.mechatronics.MechatronicsSession.SimulationAction
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.mechatronics.MotionProfileBuilder.MasterValueUnit
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.mechatronics.MotionProfileBuilder.MasterValueUnit
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.mechatronics.MotionProfileBuilder.ProfileCyclicType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.mechatronics.MotionProfileBuilder.ProfileCyclicType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.mechatronics.MotionProfileBuilder.SlaveValueUnit
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.mechatronics.MotionProfileBuilder.SlaveValueUnit
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.mechatronics.ObjectSinkBuilder.DeleteSourceType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.mechatronics.ObjectSinkBuilder.DeleteSourceType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.mechatronics.ObjectSourceBuilder.CopyEventTriggerOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.mechatronics.ObjectSourceBuilder.CopyEventTriggerOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.mechatronics.ObjectTransformerBuilder.TransformSourceType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.mechatronics.ObjectTransformerBuilder.TransformSourceType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.mechatronics.OPCClientBuilder.ServerOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.mechatronics.OPCClientBuilder.ServerOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.mechatronics.OPCClientBuilder.TagAccess
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.mechatronics.OPCClientBuilder.TagAccess
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.mechatronics.OPCClientBuilder.TagDataType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.mechatronics.OPCClientBuilder.TagDataType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.mechatronics.ParameterStockBuilder.Assignment
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.mechatronics.ParameterStockBuilder.Assignment
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.mechatronics.ParameterStockBuilder.DataType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.mechatronics.ParameterStockBuilder.DataType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.mechatronics.PathConstraintFrameBuilder.CurveTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.mechatronics.PathConstraintFrameBuilder.CurveTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.mechatronics.PathConstraintJointBuilder.PathTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.mechatronics.PathConstraintJointBuilder.PathTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.mechatronics.PositionControlBuilder.AngularPathOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.mechatronics.PositionControlBuilder.AngularPathOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.mechatronics.PositionControlBuilder.Axis
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.mechatronics.PositionControlBuilder.Axis
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.mechatronics.PreferencesBuilder.MasterTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.mechatronics.PreferencesBuilder.MasterTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.mechatronics.ProxyObjectBuilder.Type
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.mechatronics.ProxyObjectBuilder.Type
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.mechatronics.ProxyOverrideObjectBuilder.AttrBoolValue
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.mechatronics.ProxyOverrideObjectBuilder.AttrBoolValue
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.mechatronics.ProxyOverrideObjectBuilder.AttrType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.mechatronics.ProxyOverrideObjectBuilder.AttrType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.mechatronics.ReadWriteDeviceBuilder.DeviceType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.mechatronics.ReadWriteDeviceBuilder.DeviceType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.mechatronics.ReadWriteDeviceBuilder.ExecuteMode
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.mechatronics.ReadWriteDeviceBuilder.ExecuteMode
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.mechatronics.RigidBodyBuilder.MassPropertiesOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.mechatronics.RigidBodyBuilder.MassPropertiesOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.mechatronics.SignalAdapterBuilder.DataPortType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.mechatronics.SignalAdapterBuilder.DataPortType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.mechatronics.SignalAdapterBuilder.DataType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.mechatronics.SignalAdapterBuilder.DataType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.mechatronics.SpeedControlBuilder.AxisJointType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.mechatronics.SpeedControlBuilder.AxisJointType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.mechatronics.SpeedPositionControlDirectiontype
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.mechatronics.SpeedPositionControlDirectiontype
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.mechatronics.SpringDamperBuilder.AxisJointType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.mechatronics.SpringDamperBuilder.AxisJointType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.mechatronics.SystemObject.RelationType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.mechatronics.SystemObject.RelationType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.mechatronics.SystemObject.ReorderType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.mechatronics.SystemObject.ReorderType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.mechatronics.SystemRoot.Type
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.mechatronics.SystemRoot.Type
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.mechatronics.TransportSurfaceBuilder.MoveType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.mechatronics.TransportSurfaceBuilder.MoveType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.mechatronics.VirtualAxisBuilder.VirtualAxisType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.mechatronics.VirtualAxisBuilder.VirtualAxisType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.menubar.ContextMenuEntry.Type
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.menubar.ContextMenuEntry.Type
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.menubar.MenuBarManager.CallbackStatus
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.menubar.MenuBarManager.CallbackStatus
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.menubar.MenuButton.SensitivityStatus
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.menubar.MenuButton.SensitivityStatus
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.menubar.MenuButton.Toggle
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.menubar.MenuButton.Toggle
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.menubar.MenuButton.Type
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.menubar.MenuButton.Type
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.MeshParameterData.FeatureType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.MeshParameterData.FeatureType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.MeshParameterData.Type
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.MeshParameterData.Type
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.MeshProfileString.InsertOrder
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.MeshProfileString.InsertOrder
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.MeshProfileString.SelectedPoint
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.MeshProfileString.SelectedPoint
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.MeshProfileString.Type
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.MeshProfileString.Type
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.ModelingView.SectionCap
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.ModelingView.SectionCap
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.ModelingView.SectionPlane
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.ModelingView.SectionPlane
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.ModelingViewHighQualityImage.DisplayTechniqueType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.ModelingViewHighQualityImage.DisplayTechniqueType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.ModelingViewHighQualityImage.FormatType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.ModelingViewHighQualityImage.FormatType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.ModelingViewHighQualityImage.ShadeMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.ModelingViewHighQualityImage.ShadeMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.motion.ActiveView
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.motion.ActiveView
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.motion.BodyContactAdams.CoulombFriction
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.motion.BodyContactAdams.CoulombFriction
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.motion.BodyContactAdams.ForceModel
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.motion.BodyContactAdams.ForceModel
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.motion.BodyContactLms.CoulombFriction
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.motion.BodyContactLms.CoulombFriction
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.motion.BodyContactRecurdyn.ContactType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.motion.BodyContactRecurdyn.ContactType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.motion.BodyContactRecurdyn.CoulombFriction
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.motion.BodyContactRecurdyn.CoulombFriction
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.motion.BodyContactRecurdyn.ForceModel
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.motion.BodyContactRecurdyn.ForceModel
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.motion.BodyContactRecurdyn.SurfaceType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.motion.BodyContactRecurdyn.SurfaceType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.motion.BushingBuilder.BushingTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.motion.BushingBuilder.BushingTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.motion.BushingCylindricalCoefficientTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.motion.BushingCylindricalCoefficientTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.motion.BushingDefine.OrientationTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.motion.BushingDefine.OrientationTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.motion.BushingGeneralCoefficientMoveTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.motion.BushingGeneralCoefficientMoveTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.motion.BushingGeneralCoefficientTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.motion.BushingGeneralCoefficientTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.motion.ConnectorBuilder.AttachmentType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.motion.ConnectorBuilder.AttachmentType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.motion.ConnectorCoefficientTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.motion.ConnectorCoefficientTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.motion.CurveContactBuilder.GeometryMaterialSide
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.motion.CurveContactBuilder.GeometryMaterialSide
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.motion.CurveParameterizedTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.motion.CurveParameterizedTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.motion.DriverOperation.IntegrationType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.motion.DriverOperation.IntegrationType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.motion.DriverOperation.Type
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.motion.DriverOperation.Type
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.motion.FlexBodyBuilder.Positioning
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.motion.FlexBodyBuilder.Positioning
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.motion.FlexBodyBuilder.SourceType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.motion.FlexBodyBuilder.SourceType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.motion.ForceValueTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.motion.ForceValueTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.motion.GcouplerMovementTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.motion.GcouplerMovementTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.motion.GeneralCouplerBuilder.AttachmentType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.motion.GeneralCouplerBuilder.AttachmentType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.motion.GraphBuilder.ComponentChoices
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.motion.GraphBuilder.ComponentChoices
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.motion.GraphBuilder.CsysChoices
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.motion.GraphBuilder.CsysChoices
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.motion.GraphBuilder.PlotStyleChoices
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.motion.GraphBuilder.PlotStyleChoices
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.motion.GraphBuilder.RequestChoices
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.motion.GraphBuilder.RequestChoices
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.motion.GraphBuilder.XAxisTypeChoices
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.motion.GraphBuilder.XAxisTypeChoices
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.motion.JointDefine.OrientationType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.motion.JointDefine.OrientationType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.motion.JointDefine.Type
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.motion.JointDefine.Type
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.motion.JointFrictionAdams.FrictionEffect
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.motion.JointFrictionAdams.FrictionEffect
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.motion.JointFrictionAdams.FrictionOverlapDelta
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.motion.JointFrictionAdams.FrictionOverlapDelta
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.motion.JointFrictionAdams.FrictionYokeType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.motion.JointFrictionAdams.FrictionYokeType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.motion.JointFrictionRecurDyn.FrictionEffect
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.motion.JointFrictionRecurDyn.FrictionEffect
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.motion.JointFrictionRecurDyn.FrictionOverlapDelta
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.motion.JointFrictionRecurDyn.FrictionOverlapDelta
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.motion.JointFrictionRecurDyn.FrictionYokeType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.motion.JointFrictionRecurDyn.FrictionYokeType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.motion.LinkInitialVelocity.AngularVelocityType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.motion.LinkInitialVelocity.AngularVelocityType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.motion.LinkMassProperty.MassPropertyType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.motion.LinkMassProperty.MassPropertyType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.motion.LmsSolverProperty.DynamicAccelerationMethods
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.motion.LmsSolverProperty.DynamicAccelerationMethods
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.motion.LmsSolverProperty.DynamicInitialVelocityMethods
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.motion.LmsSolverProperty.DynamicInitialVelocityMethods
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.motion.LmsSolverProperty.StaticJacobianTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.motion.LmsSolverProperty.StaticJacobianTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.motion.Marker.MarkerType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.motion.Marker.MarkerType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.motion.MotionEnvironment.Analysis
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.motion.MotionEnvironment.Analysis
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.motion.MotionEnvironment.JointWizardStatus
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.motion.MotionEnvironment.JointWizardStatus
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.motion.MotionEnvironment.Solver
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.motion.MotionEnvironment.Solver
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.motion.MotionObject.GroupType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.motion.MotionObject.GroupType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.motion.MotionSensorBuilder.Component
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.motion.MotionSensorBuilder.Component
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.motion.MotionSensorBuilder.Reference
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.motion.MotionSensorBuilder.Reference
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.motion.MotionSensorBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.motion.MotionSensorBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.motion.MotionSolutionBuilder.AnalysisTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.motion.MotionSolutionBuilder.AnalysisTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.motion.MotionSolutionBuilder.SolutionTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.motion.MotionSolutionBuilder.SolutionTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.motion.PackagingInterferenceBuilder.Action
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.motion.PackagingInterferenceBuilder.Action
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.motion.PackagingInterferenceBuilder.Frame
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.motion.PackagingInterferenceBuilder.Frame
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.motion.PackagingInterferenceBuilder.Mode
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.motion.PackagingInterferenceBuilder.Mode
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.motion.PackagingMeasureBuilder.MeasureCondition
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.motion.PackagingMeasureBuilder.MeasureCondition
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.motion.PackagingMeasureBuilder.MeasureType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.motion.PackagingMeasureBuilder.MeasureType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.motion.PackagingTraceBuilder.Frame
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.motion.PackagingTraceBuilder.Frame
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.motion.PlantOutputBuilder.Poutype
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.motion.PlantOutputBuilder.Poutype
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.motion.PlayMode
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.motion.PlayMode
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.motion.PMDCMotorBuilder.Type
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.motion.PMDCMotorBuilder.Type
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.motion.RecurdynSolverProperty.StaticIntegratorTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.motion.RecurdynSolverProperty.StaticIntegratorTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.motion.SignalChartBuilder.Type
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.motion.SignalChartBuilder.Type
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.motion.SignalChartListItem.Condition
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.motion.SignalChartListItem.Condition
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.motion.SignalChartListItem.Timer
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.motion.SignalChartListItem.Timer
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.motion.VobjectCsysType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.motion.VobjectCsysType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.MovieSettingsBuilder.CaptureAreaChoices
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.MovieSettingsBuilder.CaptureAreaChoices
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.MovieSettingsBuilder.PlaybackSpeedChoices
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.MovieSettingsBuilder.PlaybackSpeedChoices
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.NXMessageBox.DialogType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.NXMessageBox.DialogType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.NXObject.AttributeType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.NXObject.AttributeType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.NXObject.DateAndTimeFormat
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.NXObject.DateAndTimeFormat
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.NXTo2dCreator.ExportDataOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.NXTo2dCreator.ExportDataOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.NXTo2dCreator.ExportFromOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.NXTo2dCreator.ExportFromOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.NXTo2dCreator.OutputAsOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.NXTo2dCreator.OutputAsOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.NXTo2dCreator.OutputToOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.NXTo2dCreator.OutputToOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.ObjectList.DeleteOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.ObjectList.DeleteOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.ObjectSelector.Scope
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.ObjectSelector.Scope
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.Offset.OnFaceOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.Offset.OnFaceOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.optimization.DesignStudyBuilder.DesignStudyAttributeType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.optimization.DesignStudyBuilder.DesignStudyAttributeType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.optimization.DesignStudyBuilder.DesignStudyConstraintLimitType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.optimization.DesignStudyBuilder.DesignStudyConstraintLimitType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.optimization.DesignStudyBuilder.DesignStudyDistributeType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.optimization.DesignStudyBuilder.DesignStudyDistributeType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.optimization.OptimizationBuilder.OptimizationAlgorithmType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.optimization.OptimizationBuilder.OptimizationAlgorithmType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.optimization.OptimizationBuilder.OptimizationAttributeType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.optimization.OptimizationBuilder.OptimizationAttributeType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.optimization.OptimizationBuilder.OptimizationConstraintLimitType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.optimization.OptimizationBuilder.OptimizationConstraintLimitType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.optimization.OptimizationBuilder.OptimizationConvergenceSpeedType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.optimization.OptimizationBuilder.OptimizationConvergenceSpeedType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.optimization.OptimizationBuilder.OptimizationTargetType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.optimization.OptimizationBuilder.OptimizationTargetType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.options.LevelLockedByDefault
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.options.LevelLockedByDefault
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.options.LevelType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.options.LevelType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.options.OptionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.options.OptionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.Part.PartFamilyAttrType
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.Part.PartFamilyAttrType
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.Part.Relations
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.Part.Relations
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.Part.Units
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.Part.Units
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.PartCleanup.CleanupParts
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.PartCleanup.CleanupParts
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.PartCleanup.DeleteGroups
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.PartCleanup.DeleteGroups
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.PartCleanup.ResetComponentDisplayAction
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.PartCleanup.ResetComponentDisplayAction
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.PartCollection.RefsetOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.PartCollection.RefsetOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.PartCollection.SdpsStatus
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.PartCollection.SdpsStatus
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.PartCollection.WorkComponentOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.PartCollection.WorkComponentOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.partfamily.FamilyAttribute.AttrType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.partfamily.FamilyAttribute.AttrType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.PartImporter.DestinationCoordinateSystemSpecificationType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.PartImporter.DestinationCoordinateSystemSpecificationType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.PartImporter.LayerOptionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.PartImporter.LayerOptionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.PartSaveOptions.PatternData
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.PartSaveOptions.PatternData
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.PasteSpecialBuilder.DestinationOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.PasteSpecialBuilder.DestinationOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.PasteSpecialBuilder.LayerOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.PasteSpecialBuilder.LayerOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.pdm.CaeCloneManager.CloneOption
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.pdm.CaeCloneManager.CloneOption
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.pdm.ConfigurationContextBuilder.ConfigContextMode
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.pdm.ConfigurationContextBuilder.ConfigContextMode
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.pdm.ConfigurationContextBuilder.ConfigContextType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.pdm.ConfigurationContextBuilder.ConfigContextType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.pdm.ConfigurationContextBuilder.ConfigurationDetail
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.pdm.ConfigurationContextBuilder.ConfigurationDetail
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.pdm.DesignElementRevision.DesignElementCategory
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.pdm.DesignElementRevision.DesignElementCategory
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.pdm.ModelElementRevision.PositioningStatus
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.pdm.ModelElementRevision.PositioningStatus
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.pdm.PartBuilder.Operation
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.pdm.PartBuilder.Operation
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.pdm.PartFromPartBuilder.FileSaveAs
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.pdm.PartFromPartBuilder.FileSaveAs
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.pdm.PartOperationBuilder.DependentFileSaveAs
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.pdm.PartOperationBuilder.DependentFileSaveAs
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.pdm.PartOperationBuilder.NonMasterSaveAs
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.pdm.PartOperationBuilder.NonMasterSaveAs
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.pdm.PartOperationBuilder.OperationType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.pdm.PartOperationBuilder.OperationType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.pdm.PartOperationCopyBuilder.CopyDependentFiles
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.pdm.PartOperationCopyBuilder.CopyDependentFiles
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.pdm.PartOperationCopyBuilder.CopyNonMasterParts
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.pdm.PartOperationCopyBuilder.CopyNonMasterParts
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.pdm.PartOperationCopyBuilder.OperationSubType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.pdm.PartOperationCopyBuilder.OperationSubType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.pdm.PartOperationCreateBuilder.OperationSubType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.pdm.PartOperationCreateBuilder.OperationSubType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.pdm.PdmSoaqueryNxmgrfielddatatype
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.pdm.PdmSoaqueryNxmgrfielddatatype
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.Persistence
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.Persistence
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.PhysicalMaterial.AssignWarning
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.PhysicalMaterial.AssignWarning
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.PhysicalMaterial.Category
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.PhysicalMaterial.Category
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.PhysicalMaterial.Type
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.PhysicalMaterial.Type
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.PlaneNormalOrientation
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.PlaneNormalOrientation
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.PlaneTypes.AlternateType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.PlaneTypes.AlternateType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.PlaneTypes.FrenetSubtype
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.PlaneTypes.FrenetSubtype
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.PlaneTypes.MethodType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.PlaneTypes.MethodType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.PlotBuilder.ImageResolutionOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.PlotBuilder.ImageResolutionOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.PlotBuilder.JustificationOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.PlotBuilder.JustificationOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.PlotBuilder.PlotTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.PlotBuilder.PlotTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.PlotBuilder.RotationOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.PlotBuilder.RotationOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.PlotBuilder.UnitsOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.PlotBuilder.UnitsOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.PlotBuilder.XdisplayOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.PlotBuilder.XdisplayOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.PlotBuilder.YdisplayOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.PlotBuilder.YdisplayOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.PlotColorsWidthsBuilder.Color
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.PlotColorsWidthsBuilder.Color
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.PlotColorsWidthsBuilder.Width
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.PlotColorsWidthsBuilder.Width
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.PointCollection.AlongCurveOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.PointCollection.AlongCurveOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.PointCollection.PointOnCurveLocationOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.PointCollection.PointOnCurveLocationOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.positioning.ComponentConstraint.DirectionToFixed
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.positioning.ComponentConstraint.DirectionToFixed
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.positioning.ComponentNetwork.ArrangementsMode
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.positioning.ComponentNetwork.ArrangementsMode
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.positioning.Constraint.Alignment
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.positioning.Constraint.Alignment
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.positioning.Constraint.SolverStatus
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.positioning.Constraint.SolverStatus
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.positioning.Constraint.SplineType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.positioning.Constraint.SplineType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.positioning.Constraint.Type
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.positioning.Constraint.Type
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.positioning.ConstraintReference.ConstraintOrder
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.positioning.ConstraintReference.ConstraintOrder
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.positioning.ConstraintReference.GeometryType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.positioning.ConstraintReference.GeometryType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.positioning.ConstraintReference.HalfSpace
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.positioning.ConstraintReference.HalfSpace
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.positioning.MatingConverter.PartContext
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.positioning.MatingConverter.PartContext
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.positioning.Network.ObjectStatus
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.positioning.Network.ObjectStatus
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.PositioningDimension.Subtype
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.PositioningDimension.Subtype
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.AngleFormat
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.AngleFormat
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.DecimalPointCharacter
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.DecimalPointCharacter
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.DetailBoundaryOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.DetailBoundaryOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.Font
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.Font
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.GdtOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.GdtOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.GeneralDisplayIdOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.GeneralDisplayIdOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.GeneralExtractedEdgesOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.GeneralExtractedEdgesOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.GeneralToleranceOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.GeneralToleranceOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.GeneralViewQualityOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.GeneralViewQualityOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.GeneralViewRepresentationOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.GeneralViewRepresentationOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.GeneralWireframeColorSourceOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.GeneralWireframeColorSourceOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.HiddenLineInterferingSolidsOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.HiddenLineInterferingSolidsOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.HiddenLineSmallFeatureOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.HiddenLineSmallFeatureOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.LoadDraftingStandardBuilder.LoadLevel
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.LoadDraftingStandardBuilder.LoadLevel
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.ObjectPreferences.Translucency
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.ObjectPreferences.Translucency
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.PartDrafting.BreakLineStyle
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.PartDrafting.BreakLineStyle
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.PartDrafting.FontType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.PartDrafting.FontType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.PartDrafting.UpdateViewWithoutLwDataOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.PartDrafting.UpdateViewWithoutLwDataOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.PartDrafting.ViewStyleType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.PartDrafting.ViewStyleType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.PartDrafting.WidthType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.PartDrafting.WidthType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.PartFlexiblePrintedCircuitDesign.FlatPatternCalloutOrientationType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.PartFlexiblePrintedCircuitDesign.FlatPatternCalloutOrientationType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.PartFlexiblePrintedCircuitDesign.FlatPatternObjectType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.PartFlexiblePrintedCircuitDesign.FlatPatternObjectType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.PartFlexiblePrintedCircuitDesign.FlexibleCableContactFaceOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.PartFlexiblePrintedCircuitDesign.FlexibleCableContactFaceOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.PartModeling.CurveCurvatureDisplayType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.PartModeling.CurveCurvatureDisplayType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.PartModeling.DensityUnitType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.PartModeling.DensityUnitType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.PartModeling.GridKnotLineFontType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.PartModeling.GridKnotLineFontType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.PartModeling.GridResolutionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.PartModeling.GridResolutionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.PartObject.ColorSelection
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.PartObject.ColorSelection
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.PartObject.LineFontType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.PartObject.LineFontType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.PartObject.ObjectType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.PartObject.ObjectType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.PartObject.WidthType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.PartObject.WidthType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.PartSheetmetal.BendDefinitionMethodOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.PartSheetmetal.BendDefinitionMethodOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.PartSheetmetal.FlatPatternCalloutOrientationType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.PartSheetmetal.FlatPatternCalloutOrientationType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.PartSheetmetal.FlatPatternObjectType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.PartSheetmetal.FlatPatternObjectType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.PartVisualizationColorSetting.RandomColorDisplayFor
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.PartVisualizationColorSetting.RandomColorDisplayFor
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.PartVisualizationEmphasis.EdgesType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.PartVisualizationEmphasis.EdgesType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.PartVisualizationEmphasis.SeeThruStyleType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.PartVisualizationEmphasis.SeeThruStyleType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.PartVisualizationLine.LineFontDisplayType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.PartVisualizationLine.LineFontDisplayType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.PartVisualizationNamesBorders.NameDisplay
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.PartVisualizationNamesBorders.NameDisplay
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.PartVisualizationShade.AdvViewToleranceType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.PartVisualizationShade.AdvViewToleranceType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.PartVisualizationShade.HiddenShadedFaceEdges
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.PartVisualizationShade.HiddenShadedFaceEdges
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.PartVisualizationShade.ShadedFaceEdge
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.PartVisualizationShade.ShadedFaceEdge
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.PartVisualizationShade.ShadedViewToleranceType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.PartVisualizationShade.ShadedViewToleranceType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.PartVisualizationShade.ViewUpdateModeType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.PartVisualizationShade.ViewUpdateModeType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.PmiOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.PmiOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.ReferenceSetBehavior
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.ReferenceSetBehavior
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.RoutingApplicationView.AppType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.RoutingApplicationView.AppType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.RoutingElectrical.ComponentMatchType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.RoutingElectrical.ComponentMatchType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.RoutingElectrical.CreateTerminalsType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.RoutingElectrical.CreateTerminalsType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.RoutingLogical.FlowArrowEnumType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.RoutingLogical.FlowArrowEnumType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.RoutingMechanical.LineColorType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.RoutingMechanical.LineColorType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.RoutingPart.DetailLevel
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.RoutingPart.DetailLevel
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.RoutingPart.FabricationNumbering
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.RoutingPart.FabricationNumbering
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.RoutingPart.PreferredPortMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.RoutingPart.PreferredPortMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.RoutingPart.StockLengthDisplay
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.RoutingPart.StockLengthDisplay
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.RoutingPart.UsePreferredPort
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.RoutingPart.UsePreferredPort
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.RoutingPartLibrary.ColumnStatus
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.RoutingPartLibrary.ColumnStatus
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.RoutingPartLibrary.ColumnType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.RoutingPartLibrary.ColumnType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.RoutingPartLibrary.NodeType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.RoutingPartLibrary.NodeType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.RoutingPartLibrary.RootType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.RoutingPartLibrary.RootType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.RoutingPath.AddPointsToSpline
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.RoutingPath.AddPointsToSpline
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.RoutingPath.AllowedCornerType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.RoutingPath.AllowedCornerType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.RoutingPath.ChainMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.RoutingPath.ChainMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.RoutingPath.ConfirmBranchSel
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.RoutingPath.ConfirmBranchSel
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.RoutingPath.ContinueUpdOnError
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.RoutingPath.ContinueUpdOnError
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.RoutingPath.CreateSlopeConstraints
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.RoutingPath.CreateSlopeConstraints
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.RoutingPath.CreateSmartRcps
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.RoutingPath.CreateSmartRcps
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.RoutingPath.CreateTangency
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.RoutingPath.CreateTangency
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.RoutingPath.CurveType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.RoutingPath.CurveType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.RoutingPath.DefaultCornerType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.RoutingPath.DefaultCornerType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.RoutingPath.DisplayObject
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.RoutingPath.DisplayObject
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.RoutingPath.MergeDupRcps
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.RoutingPath.MergeDupRcps
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.RoutingPath.OccChainable
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.RoutingPath.OccChainable
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.RoutingPath.RadiusMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.RoutingPath.RadiusMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.RoutingPath.RadiusUnits
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.RoutingPath.RadiusUnits
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.RoutingStock.SpaceReservationModeFlag
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.RoutingStock.SpaceReservationModeFlag
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.RoutingStock.StockModeFlag
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.RoutingStock.StockModeFlag
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.SessionAssemblies.DragHandlePositionOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.SessionAssemblies.DragHandlePositionOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.SessionAssemblies.PartNameOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.SessionAssemblies.PartNameOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.SessionAssemblies.PositioningTaskCollectionOptionForDesignElements
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.SessionAssemblies.PositioningTaskCollectionOptionForDesignElements
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.SessionDrafting.AnnotationStyleType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.SessionDrafting.AnnotationStyleType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.SessionDrafting.EdgeFaceDisplayType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.SessionDrafting.EdgeFaceDisplayType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.SessionDrafting.GridObjectType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.SessionDrafting.GridObjectType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.SessionMeasureRequirements.ActionOnViolation
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.SessionMeasureRequirements.ActionOnViolation
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.SessionModeling.BodyTypeOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.SessionModeling.BodyTypeOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.SessionModeling.BooleanFacePropertiesInheritance
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.SessionModeling.BooleanFacePropertiesInheritance
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.SessionModeling.CurveFitMethodType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.SessionModeling.CurveFitMethodType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.SessionModeling.DynamicUpdateType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.SessionModeling.DynamicUpdateType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.SessionModeling.EndpointDisplayStyleType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.SessionModeling.EndpointDisplayStyleType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.SessionModeling.FreeFormConstructionResultType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.SessionModeling.FreeFormConstructionResultType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.SessionModeling.ImmediateChildrenType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.SessionModeling.ImmediateChildrenType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.SessionModeling.LinkedAndExtractedGeometryPropertiesInheritance
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.SessionModeling.LinkedAndExtractedGeometryPropertiesInheritance
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.SessionModeling.NewFacePropertiesInheritance
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.SessionModeling.NewFacePropertiesInheritance
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.SessionModeling.PoleDisplayStyleType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.SessionModeling.PoleDisplayStyleType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.SessionModeling.PoleEditStyleType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.SessionModeling.PoleEditStyleType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.SessionModeling.PolylineStyleType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.SessionModeling.PolylineStyleType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.SessionModeling.PreviewResolutionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.SessionModeling.PreviewResolutionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.SessionModeling.SaveDataForFeatureEditOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.SessionModeling.SaveDataForFeatureEditOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.SessionModeling.ShareGeometriesOnSaveType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.SessionModeling.ShareGeometriesOnSaveType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.SessionModeling.SketchDefaultActionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.SessionModeling.SketchDefaultActionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.SessionModeling.SketchEditType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.SessionModeling.SketchEditType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.SessionModeling.SplineDefaultActionTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.SessionModeling.SplineDefaultActionTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.SessionModeling.SurfaceExtensionOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.SessionModeling.SurfaceExtensionOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.SessionPdm.JtUpdateFromSourceType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.SessionPdm.JtUpdateFromSourceType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.SessionPdm.MessagesInconsistentRevisionsType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.SessionPdm.MessagesInconsistentRevisionsType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.SessionPdm.SynchroniseOnLoadType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.SessionPdm.SynchroniseOnLoadType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.SessionPdm.SynchroniseOnSaveType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.SessionPdm.SynchroniseOnSaveType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.SessionPdm.UnpopulatedBehaviourType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.SessionPdm.UnpopulatedBehaviourType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.SessionSketch.BackgroundType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.SessionSketch.BackgroundType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.SessionSketch.OriginType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.SessionSketch.OriginType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.SessionSketch.RigidSetConstraintType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.SessionSketch.RigidSetConstraintType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.SessionUserInterface.JournalFileFormatType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.SessionUserInterface.JournalFileFormatType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.SessionUserInterface.JournalLanguageType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.SessionUserInterface.JournalLanguageType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.SessionUserInterfaceUI.DisplayResourceBar
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.SessionUserInterfaceUI.DisplayResourceBar
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.SessionVisualizationHighQualityImage.ImageSizeType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.SessionVisualizationHighQualityImage.ImageSizeType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.SessionVisualizationHighQualityImage.OrientationType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.SessionVisualizationHighQualityImage.OrientationType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.SessionVisualizationHighQualityImage.PlotQualityType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.SessionVisualizationHighQualityImage.PlotQualityType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.SessionVisualizationHighQualityImage.ResolutionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.SessionVisualizationHighQualityImage.ResolutionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.SessionVisualizationScreen.ViewTriadLocation
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.SessionVisualizationScreen.ViewTriadLocation
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.SessionVisualizationShade.SeeThruEdgesType
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.SessionVisualizationShade.SeeThruEdgesType
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.SessionVisualizationShade.SeeThruStyleType
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.SessionVisualizationShade.SeeThruStyleType
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.SessionWorkPlane.ObjectDisplay
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.SessionWorkPlane.ObjectDisplay
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.ShadingRenderingStyleOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.ShadingRenderingStyleOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.ShadingToleranceOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.ShadingToleranceOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.ShipbuildingLinesViewPreferences.Lines
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.ShipbuildingLinesViewPreferences.Lines
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.ShipbuildingLinesViewPreferences.ShipbuildingLines
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.ShipbuildingLinesViewPreferences.ShipbuildingLines
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.ShipDraftingViewLinesViewPreferences.Lines
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.ShipDraftingViewLinesViewPreferences.Lines
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.SketchPreferences.DimensionLabelType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.SketchPreferences.DimensionLabelType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.SubdivisionModelingPreferences.DisplayModes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.SubdivisionModelingPreferences.DisplayModes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.SubdivisionModelingPreferences.VertexSizeTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.SubdivisionModelingPreferences.VertexSizeTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.SubdivisionModelingPreferences.VertexStyleTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.SubdivisionModelingPreferences.VertexStyleTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.ViewVisualizationSpecialEffects.FogType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.ViewVisualizationSpecialEffects.FogType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.ViewVisualizationVisual.DisplayModeType
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.ViewVisualizationVisual.DisplayModeType
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.ViewVisualizationVisual.HiddenEdges
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.ViewVisualizationVisual.HiddenEdges
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.ViewVisualizationVisual.HiddenEdgeStyleType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.ViewVisualizationVisual.HiddenEdgeStyleType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.ViewVisualizationVisual.HiddenEdgesType
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.ViewVisualizationVisual.HiddenEdgesType
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.ViewVisualizationVisual.RenderingStyle
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.ViewVisualizationVisual.RenderingStyle
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.ViewVisualizationVisual.ShadedEdgeStyleType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.ViewVisualizationVisual.ShadedEdgeStyleType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.ViewVisualizationVisual.SmoothEdgeFont
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.ViewVisualizationVisual.SmoothEdgeFont
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.ViewVisualizationVisual.SmoothEdgeWidth
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.ViewVisualizationVisual.SmoothEdgeWidth
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.VisualizationFonts.StyleType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.VisualizationFonts.StyleType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.VisualizationHandles.HandleSizeValue
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.VisualizationHandles.HandleSizeValue
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.Width
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.Width
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.preferences.WorkPlane.Grid
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.preferences.WorkPlane.Grid
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.PreviewPropertiesBuilder.ModelViewCreationOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.PreviewPropertiesBuilder.ModelViewCreationOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.PreviewPropertiesBuilder.PartCreationOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.PreviewPropertiesBuilder.PartCreationOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.PrintBuilder.ImageResolutionOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.PrintBuilder.ImageResolutionOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.PrintBuilder.OrientationOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.PrintBuilder.OrientationOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.PrintBuilder.OutputOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.PrintBuilder.OutputOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.PrintBuilder.PaperSize
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.PrintBuilder.PaperSize
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.PrintPDFBuilder.ActionOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.PrintPDFBuilder.ActionOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.PrintPDFBuilder.Color
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.PrintPDFBuilder.Color
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.PrintPDFBuilder.ImageResolutionOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.PrintPDFBuilder.ImageResolutionOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.PrintPDFBuilder.OutputTextOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.PrintPDFBuilder.OutputTextOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.PrintPDFBuilder.RelationOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.PrintPDFBuilder.RelationOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.PrintPDFBuilder.SizeOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.PrintPDFBuilder.SizeOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.PrintPDFBuilder.UnitsOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.PrintPDFBuilder.UnitsOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.PrintPDFBuilder.Width
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.PrintPDFBuilder.Width
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.PropertyContainer.ListMode
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.PropertyContainer.ListMode
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.PropertyContainer.PropertyType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.PropertyContainer.PropertyType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.AssignDiscontinuityBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.AssignDiscontinuityBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.BendCornerCollection.Type
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.BendCornerCollection.Type
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.BranchPathNumberingBuilder.Sequence
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.BranchPathNumberingBuilder.Sequence
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.CompareRunsBuilder.CompareTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.CompareRunsBuilder.CompareTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.ComponentName
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.ComponentName
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.ControlPoint.DefinedStatus
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.ControlPoint.DefinedStatus
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.ControlPointCollection.CheckExisting
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.ControlPointCollection.CheckExisting
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.ControlPointCollection.FoundExisting
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.ControlPointCollection.FoundExisting
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.ConvertEccentricLinearToLinear
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.ConvertEccentricLinearToLinear
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.ConvertLinearToEccentricLinear
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.ConvertLinearToEccentricLinear
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.Corner.Type
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.Corner.Type
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.CornerTypeBuilder.BendMethods
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.CornerTypeBuilder.BendMethods
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.CornerTypeBuilder.BendOptions
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.CornerTypeBuilder.BendOptions
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.CornerTypeBuilder.Type
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.CornerTypeBuilder.Type
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.CreationMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.CreationMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.DesignRuleViolation.BlankOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.DesignRuleViolation.BlankOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.DesignRuleViolationCollection.Mode
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.DesignRuleViolationCollection.Mode
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.DesignRuleViolationCollection.Reason
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.DesignRuleViolationCollection.Reason
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.DesignRuleViolationLocationCollection.DeleteOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.DesignRuleViolationLocationCollection.DeleteOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.DesignRuleViolationViewer.FilterOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.DesignRuleViolationViewer.FilterOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.DesignRuleViolationViewer.OverrideOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.DesignRuleViolationViewer.OverrideOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.DeviceRelationship.RelationType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.DeviceRelationship.RelationType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.Division.SplitDirectionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.Division.SplitDirectionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.DivisionsBuilder.SplitDirectionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.DivisionsBuilder.SplitDirectionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.DuctReinforcementBuilder.ReinforcementTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.DuctReinforcementBuilder.ReinforcementTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.DuctSizeCalculatorBuilder.DuctShapeType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.DuctSizeCalculatorBuilder.DuctShapeType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.Eccentric
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.Eccentric
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.electrical.ConnectorDevice.Assign
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.electrical.ConnectorDevice.Assign
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.electrical.ConnectorDevice.ComponentType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.electrical.ConnectorDevice.ComponentType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.electrical.ElectricalFormat.Type
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.electrical.ElectricalFormat.Type
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.electrical.ElectricalStockDefinition.SectionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.electrical.ElectricalStockDefinition.SectionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.electrical.ElectricalStockDevice.AutoRouteSel
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.electrical.ElectricalStockDevice.AutoRouteSel
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.electrical.ElectricalStockDevice.RouteLevel
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.electrical.ElectricalStockDevice.RouteLevel
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.electrical.ElectricalStockDevice.RouteTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.electrical.ElectricalStockDevice.RouteTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.FittingOverstockBuilder.TrimMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.FittingOverstockBuilder.TrimMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.FittingOverstockBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.FittingOverstockBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.Flip
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.Flip
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.HandrailBuilder.PostTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.HandrailBuilder.PostTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.HealMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.HealMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.IntegrateRunsBuilder.Button
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.IntegrateRunsBuilder.Button
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.IntegrateRunsBuilder.Enum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.IntegrateRunsBuilder.Enum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.InterfaceTerminalRelationshipBase.RelationType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.InterfaceTerminalRelationshipBase.RelationType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.Interior
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.Interior
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.IsoDrawingBuilder.DrawingTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.IsoDrawingBuilder.DrawingTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.IsoDrawingBuilder.RunsToDrawTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.IsoDrawingBuilder.RunsToDrawTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.Method
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.Method
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.ModelTerminalsBuilder.CutBackLocationOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.ModelTerminalsBuilder.CutBackLocationOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.ModelTerminalsBuilder.ExtensionValueOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.ModelTerminalsBuilder.ExtensionValueOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.OffsetPathCollection.BendType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.OffsetPathCollection.BendType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.Operation
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.Operation
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.OverstockBuilder.ApplicationType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.OverstockBuilder.ApplicationType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.OverstockBuilder.PointType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.OverstockBuilder.PointType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.OverstockBuilder.WrapType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.OverstockBuilder.WrapType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.PathStockBuilder.AssignMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.PathStockBuilder.AssignMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.PathStockBuilder.AssignStockType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.PathStockBuilder.AssignStockType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.PlatformCreatorBuilder.ReferenceType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.PlatformCreatorBuilder.ReferenceType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.PointDefinition
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.PointDefinition
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.ProfileFrom
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.ProfileFrom
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.ReuseLibrary.PartType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.ReuseLibrary.PartType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.ReuseLibrary.ReportInBom
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.ReuseLibrary.ReportInBom
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.RouteManager.BomBlankLines
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.RouteManager.BomBlankLines
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.RouteManager.BomFabrication
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.RouteManager.BomFabrication
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.RouteManager.BomLevel
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.RouteManager.BomLevel
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.RouteManager.BomStockLength
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.RouteManager.BomStockLength
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.RouteManager.ImportMode
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.RouteManager.ImportMode
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.RouteManager.PartType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.RouteManager.PartType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.RoutePartDescriptor.CharxType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.RoutePartDescriptor.CharxType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.RoutePartDescriptor.SourceType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.RoutePartDescriptor.SourceType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.Run.CompareStatus
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.Run.CompareStatus
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.Run.FlipStatus
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.Run.FlipStatus
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.Run.Status
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.Run.Status
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.RunItem.Type
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.RunItem.Type
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.SegmentManager.SubdivideSpacing
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.SegmentManager.SubdivideSpacing
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.SingleDevice.DeleteObjectResult
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.SingleDevice.DeleteObjectResult
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.SplineOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.SplineOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.SplinePathBuilder.SplinePathAttributeOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.SplinePathBuilder.SplinePathAttributeOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.SplinePathBuilder.SplinePathSlackType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.SplinePathBuilder.SplinePathSlackType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.SplitDuctBuilder.FlowTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.SplitDuctBuilder.FlowTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.StockBrowserBuilder.TypeFilter
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.StockBrowserBuilder.TypeFilter
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.StockBuilder.StockStyleType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.StockBuilder.StockStyleType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.StockDataType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.StockDataType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.StockOffsetPointBuilder.PointType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.StockOffsetPointBuilder.PointType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.StockPartConverterBuilder.PartOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.StockPartConverterBuilder.PartOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.StockStyle
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.StockStyle
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.StockStyleBuilder.StockStyle
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.StockStyleBuilder.StockStyle
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.StockType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.StockType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.StockUse
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.StockUse
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.SubdivideSegmentBuilder.EqualSegmentsMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.SubdivideSegmentBuilder.EqualSegmentsMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.SubdivideSegmentBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.SubdivideSegmentBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.Terminal
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.Terminal
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.TransformPathBuilder.CopyAttributes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.TransformPathBuilder.CopyAttributes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.TransformPathBuilder.TransformOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.TransformPathBuilder.TransformOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.Type
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.Type
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.UserDefined
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.UserDefined
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.WindCatcherBuilder.WindCatcherType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.WindCatcherBuilder.WindCatcherType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.routing.WrapApplicationType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.routing.WrapApplicationType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.RuleManager.Filter
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.RuleManager.Filter
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.RuleManager.InitializationStatusType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.RuleManager.InitializationStatusType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.RuleManager.LicenseType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.RuleManager.LicenseType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.RuleManager.RuleType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.RuleManager.RuleType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.Scalar.DimensionalityType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.Scalar.DimensionalityType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.Section.AllowTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.Section.AllowTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.Section.DeselectOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.Section.DeselectOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.Section.Mode
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.Section.Mode
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.SectionCollection.LoopOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.SectionCollection.LoopOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.Selection.DialogResponse
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.Selection.DialogResponse
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.Selection.Response
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.Selection.Response
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.Selection.SelectionAction
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.Selection.SelectionAction
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.Selection.SelectionFeatureType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.Selection.SelectionFeatureType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.Selection.SelectionScope
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.Selection.SelectionScope
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.Selection.SelectionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.Selection.SelectionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.Selection.UistylerSelectionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.Selection.UistylerSelectionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.SelectionIntentRule.RuleType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.SelectionIntentRule.RuleType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.Sense
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.Sense
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.Session.MarkVisibility
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.Session.MarkVisibility
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.Session.ProjectAssignmentObjectType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.Session.ProjectAssignmentObjectType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.Session.ProjectAssignmentState
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.Session.ProjectAssignmentState
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.Session.TransientPartPolicy
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.Session.TransientPartPolicy
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.shapesearch.ShapeSearchBuilder.OpenPartType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.shapesearch.ShapeSearchBuilder.OpenPartType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.shapesearch.ShapeSearchBuilder.SearchByType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.shapesearch.ShapeSearchBuilder.SearchByType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.shapesearch.ShapeSearchBuilder.ShapeSimilarity
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.shapesearch.ShapeSearchBuilder.ShapeSimilarity
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.shapesearch.ShapeSearchBuilder.ShapeSize
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.shapesearch.ShapeSearchBuilder.ShapeSize
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.sheetmetal.FlatPatternSettings.FlatPatternObjectType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.sheetmetal.FlatPatternSettings.FlatPatternObjectType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.sim.IsvControlPanelBuilder.SingleStepType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.sim.IsvControlPanelBuilder.SingleStepType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.sim.IsvControlPanelBuilder.VisualizationType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.sim.IsvControlPanelBuilder.VisualizationType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.sim.KinematicAxisBuilder.AxisDirectionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.sim.KinematicAxisBuilder.AxisDirectionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.sim.KinematicAxisBuilder.AxisMotionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.sim.KinematicAxisBuilder.AxisMotionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.sim.KinematicChain.CoordinatePlaneTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.sim.KinematicChain.CoordinatePlaneTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.sim.KinematicChain.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.sim.KinematicChain.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.sim.KinematicComponentBuilder.RegisterTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.sim.KinematicComponentBuilder.RegisterTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.sim.KinematicComponentBuilder.SystemClass
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.sim.KinematicComponentBuilder.SystemClass
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.sim.KinematicComponentBuilder.WorkPositionAngleTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.sim.KinematicComponentBuilder.WorkPositionAngleTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.sim.KinematicConfigurator.UniteTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.sim.KinematicConfigurator.UniteTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.sim.KinematicJunctionBuilder.SystemClass
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.sim.KinematicJunctionBuilder.SystemClass
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.sim.KinematicSinumerikCaBuilder.PlcInitStateTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.sim.KinematicSinumerikCaBuilder.PlcInitStateTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.sim.KinematicSinumerikCaBuilder.PlcUsageTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.sim.KinematicSinumerikCaBuilder.PlcUsageTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.sim.SimDebugBuilder.DriverType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.sim.SimDebugBuilder.DriverType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.sim.SimDebugBuilder.DumpType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.sim.SimDebugBuilder.DumpType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.sim.SimDebugBuilder.KinematicModelType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.sim.SimDebugBuilder.KinematicModelType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.sim.SimDebugBuilder.OutputType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.sim.SimDebugBuilder.OutputType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.sim.SimDebugBuilder.PrintoutTagsOrPointersType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.sim.SimDebugBuilder.PrintoutTagsOrPointersType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.sim.SimDebugBuilder.TraceType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.sim.SimDebugBuilder.TraceType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.sim.SimDebugBuilder.UiType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.sim.SimDebugBuilder.UiType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.sim.SinumerikCaSimplifyBodiesBuilder.CloseGapTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.sim.SinumerikCaSimplifyBodiesBuilder.CloseGapTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.sim.SinumerikCaSimplifyBodiesBuilder.ObjectToReplaceWithTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.sim.SinumerikCaSimplifyBodiesBuilder.ObjectToReplaceWithTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.Sketch.AddEllipseOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.Sketch.AddEllipseOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.Sketch.AlternateSolutionOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.Sketch.AlternateSolutionOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.Sketch.AssocType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.Sketch.AssocType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.Sketch.AutoDimensioningRule
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.Sketch.AutoDimensioningRule
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.Sketch.ConstraintClass
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.Sketch.ConstraintClass
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.Sketch.ConstraintGeometryHelpType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.Sketch.ConstraintGeometryHelpType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.Sketch.ConstraintPointType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.Sketch.ConstraintPointType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.Sketch.ConstraintType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.Sketch.ConstraintType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.Sketch.ConstraintVisibility
-
Deprecated.
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.Sketch.ConstraintVisibility
-
Deprecated.
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.Sketch.CreateDimensionOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.Sketch.CreateDimensionOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.Sketch.CreateInferConstraintSetting
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.Sketch.CreateInferConstraintSetting
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.Sketch.DeleteThirdCurveOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.Sketch.DeleteThirdCurveOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.Sketch.DimensionOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.Sketch.DimensionOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.Sketch.InferConstraintsOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.Sketch.InferConstraintsOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.Sketch.PlaneOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.Sketch.PlaneOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.Sketch.Status
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.Sketch.Status
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.Sketch.TrimInputOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.Sketch.TrimInputOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.Sketch.UpdateLevel
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.Sketch.UpdateLevel
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.Sketch.ViewReorient
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.Sketch.ViewReorient
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.SketchAlongPathBuilder.PlaneOrientationType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.SketchAlongPathBuilder.PlaneOrientationType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.SketchAlongPathBuilder.SketchOrientationType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.SketchAlongPathBuilder.SketchOrientationType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.SketchAssociativeTrimBuilder.TrimOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.SketchAssociativeTrimBuilder.TrimOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.SketchAutoDimensionBuilder.DimType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.SketchAutoDimensionBuilder.DimType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.SketchChamferBuilder.ChamferOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.SketchChamferBuilder.ChamferOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.SketchConstraintBuilder.Constraint
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.SketchConstraintBuilder.Constraint
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.SketchDimensionalConstraint.DimensionStateType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.SketchDimensionalConstraint.DimensionStateType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.SketchDimensionBuilder.ExpOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.SketchDimensionBuilder.ExpOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.SketchExpressionModifierBuilder.EndCuts
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.SketchExpressionModifierBuilder.EndCuts
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.SketchG1Constraint.SlopeType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.SketchG1Constraint.SlopeType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.SketchOffset.CapType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.SketchOffset.CapType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.SketchPattern.InstanceControl
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.SketchPattern.InstanceControl
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.SketchPattern.Type
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.SketchPattern.Type
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.SketchPolygonBuilder.SizeType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.SketchPolygonBuilder.SizeType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.SketchProjectBuilder.OutputCurve
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.SketchProjectBuilder.OutputCurve
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.SmartObject.UpdateOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.SmartObject.UpdateOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.SmartObject.VisibilityOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.SmartObject.VisibilityOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.Step203Creator.EntityNameOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.Step203Creator.EntityNameOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.Step203Creator.ExportFromOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.Step203Creator.ExportFromOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.Step203Creator.ExternalReferenceOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.Step203Creator.ExternalReferenceOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.Step203Importer.ImportToOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.Step203Importer.ImportToOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.Step214Creator.EntityNameOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.Step214Creator.EntityNameOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.Step214Creator.ExportFromOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.Step214Creator.ExportFromOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.Step214Creator.ExternalReferenceOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.Step214Creator.ExternalReferenceOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.Step214Importer.ImportToOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.Step214Importer.ImportToOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.STLImporter.AngularToleranceType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.STLImporter.AngularToleranceType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.STLImporter.FileFormatType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.STLImporter.FileFormatType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.STLImporter.FileUnitsType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.STLImporter.FileUnitsType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.SuppressByExpressionBuilder.ExpressionAction
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.SuppressByExpressionBuilder.ExpressionAction
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.SurfaceRebuildData.Type
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.SurfaceRebuildData.Type
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.AddReusablePart.ModeMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.AddReusablePart.ModeMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.AddReusablePart.PositionMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.AddReusablePart.PositionMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.AssemblyDrawingBuilder.AttributeNames
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.AssemblyDrawingBuilder.AttributeNames
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.AssemblyDrawingBuilder.AttributeValues
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.AssemblyDrawingBuilder.AttributeValues
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.AssemblyDrawingBuilder.DrawingCreateOrEdit
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.AssemblyDrawingBuilder.DrawingCreateOrEdit
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.AssemblyDrawingBuilder.DrawingTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.AssemblyDrawingBuilder.DrawingTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.AssemblyDrawingBuilder.ModelViewToUseValue
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.AssemblyDrawingBuilder.ModelViewToUseValue
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.AssemblyDrawingBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.AssemblyDrawingBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.AssemblyDrawingBuilder.ViewOptionValue
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.AssemblyDrawingBuilder.ViewOptionValue
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.AutoDimensionBuilder.MainType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.AutoDimensionBuilder.MainType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.AutoDimensionBuilder.TextFontType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.AutoDimensionBuilder.TextFontType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.AutoDimensionBuilder.TextOrientationType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.AutoDimensionBuilder.TextOrientationType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.AutoDimensionBuilder.ToleranceType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.AutoDimensionBuilder.ToleranceType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.AutoDimensionBuilder.ValuePrecisionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.AutoDimensionBuilder.ValuePrecisionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.BackingPadBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.BackingPadBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.BendInsertDesignBuilder.BendingDirectionOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.BendInsertDesignBuilder.BendingDirectionOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.BendInsertDesignBuilder.BendTypeOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.BendInsertDesignBuilder.BendTypeOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.BendInsertDesignBuilder.BlankPositions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.BendInsertDesignBuilder.BlankPositions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.BendInsertDesignBuilder.InsertTypeOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.BendInsertDesignBuilder.InsertTypeOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.BendInsertDesignBuilder.ParentOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.BendInsertDesignBuilder.ParentOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.BendInsertDesignBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.BendInsertDesignBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.BendOperationBuilder.OverbendOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.BendOperationBuilder.OverbendOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.BendOperationBuilder.Prebend
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.BendOperationBuilder.Prebend
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.BendOperationBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.BendOperationBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.BlankGeneratorBuilder.CreateBlankType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.BlankGeneratorBuilder.CreateBlankType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.BlankGeneratorBuilder.EditBlankType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.BlankGeneratorBuilder.EditBlankType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.BlankGeneratorBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.BlankGeneratorBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.BlankLayoutBuilder.LeftRightSideOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.BlankLayoutBuilder.LeftRightSideOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.BlankLayoutBuilder.SideWebOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.BlankLayoutBuilder.SideWebOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.BlankLayoutBuilder.SnapSizeOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.BlankLayoutBuilder.SnapSizeOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.BlankLayoutBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.BlankLayoutBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.BlankNestingBuilder.LayoutTypeSpecification
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.BlankNestingBuilder.LayoutTypeSpecification
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.BlendCurve3DBuilder.BlendCurveOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.BlendCurve3DBuilder.BlendCurveOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.BlendCurve3DBuilder.InputCurvesOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.BlendCurve3DBuilder.InputCurvesOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.BomBuilder.Circle
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.BomBuilder.Circle
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.BomBuilder.Shape
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.BomBuilder.Shape
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.BomBuilder.TreeList
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.BomBuilder.TreeList
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.BomListBuilder.BomListTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.BomListBuilder.BomListTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.BurringInsertBuilder.BurringDirections
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.BurringInsertBuilder.BurringDirections
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.BurringInsertBuilder.BurringPunchTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.BurringInsertBuilder.BurringPunchTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.BurringInsertBuilder.CircularOrNonCircularType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.BurringInsertBuilder.CircularOrNonCircularType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.BurringInsertBuilder.DesignOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.BurringInsertBuilder.DesignOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.BurringInsertBuilder.ParentTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.BurringInsertBuilder.ParentTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.ChangeoverManagementBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.ChangeoverManagementBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.ChannelAdjustBuilder.AdjustType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.ChannelAdjustBuilder.AdjustType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.ChannelAdjustBuilder.VectorMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.ChannelAdjustBuilder.VectorMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.ClearanceManagementBuilder.Selection
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.ClearanceManagementBuilder.Selection
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.ClearanceManagementBuilder.Type
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.ClearanceManagementBuilder.Type
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.CompDrawingBuilder.ComponentTypeSelection
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.CompDrawingBuilder.ComponentTypeSelection
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.CompDrawingBuilder.DrawingType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.CompDrawingBuilder.DrawingType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.CompDrawingBuilder.FilterSelection
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.CompDrawingBuilder.FilterSelection
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.CompDrawingBuilder.ProjectionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.CompDrawingBuilder.ProjectionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.ConcurrentDesignManagementBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.ConcurrentDesignManagementBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.ConcurrentDesignManagementBuilder.UpdateTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.ConcurrentDesignManagementBuilder.UpdateTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.CoolingDefineChannelBuilder.ExtensionTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.CoolingDefineChannelBuilder.ExtensionTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.CoolingDefineChannelBuilder.TipEndTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.CoolingDefineChannelBuilder.TipEndTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.CoolingDefineChannelBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.CoolingDefineChannelBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.CoolingExtendBuilder.TipEndTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.CoolingExtendBuilder.TipEndTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.CornerDesignBuilder.CornerTypeOpt
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.CornerDesignBuilder.CornerTypeOpt
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.CornerDesignBuilder.SelectFromOpt
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.CornerDesignBuilder.SelectFromOpt
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.CornerDesignBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.CornerDesignBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.CreateBoxBuilder.BoxType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.CreateBoxBuilder.BoxType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.DefineCamBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.DefineCamBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.DefineLifterBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.DefineLifterBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.DefineNeutralFactorBuilder.FormulaOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.DefineNeutralFactorBuilder.FormulaOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.DieBaseBuilder.AlongDirectionOpt
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.DieBaseBuilder.AlongDirectionOpt
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.DieBaseBuilder.CatalogOpt
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.DieBaseBuilder.CatalogOpt
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.DieBaseBuilder.DesignToolOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.DieBaseBuilder.DesignToolOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.DieBaseBuilder.DieBaseTypeOpt
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.DieBaseBuilder.DieBaseTypeOpt
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.DieBaseBuilder.ParentNodeOpt
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.DieBaseBuilder.ParentNodeOpt
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.DieBaseBuilder.PlatesNumberOpt
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.DieBaseBuilder.PlatesNumberOpt
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.DieBaseBuilder.SplitMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.DieBaseBuilder.SplitMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.DieBaseBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.DieBaseBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.DieDesPierceInsertBuilder.Direction
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.DieDesPierceInsertBuilder.Direction
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.DieDesPierceInsertBuilder.HoleShapeTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.DieDesPierceInsertBuilder.HoleShapeTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.DieEngProcessUpdateManagerBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.DieEngProcessUpdateManagerBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.DieEngStampingOutputBuilder.DisplayProductType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.DieEngStampingOutputBuilder.DisplayProductType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.DieEngStampingOutputBuilder.SpringbackMethodType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.DieEngStampingOutputBuilder.SpringbackMethodType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.DieEngTrimAngleCheckBuilder.DirectionOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.DieEngTrimAngleCheckBuilder.DirectionOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.DieEngTrimTaskBuilder.TrimTaskCamType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.DieEngTrimTaskBuilder.TrimTaskCamType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.DieEngTrimTaskBuilder.TrimTaskMatchCutType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.DieEngTrimTaskBuilder.TrimTaskMatchCutType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.DirectUnbendBuilder.Bendtypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.DirectUnbendBuilder.Bendtypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.DirectUnfoldBuilder.Bend
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.DirectUnfoldBuilder.Bend
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.DirectUnfoldBuilder.BodyList
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.DirectUnfoldBuilder.BodyList
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.DirectUnfoldBuilder.MatType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.DirectUnfoldBuilder.MatType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.DirectUnfoldBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.DirectUnfoldBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.EdgePatchBuilder.PatchStatus
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.EdgePatchBuilder.PatchStatus
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.EdgePatchBuilder.SelectTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.EdgePatchBuilder.SelectTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.EjectorPostProcessingBuilder.TrimMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.EjectorPostProcessingBuilder.TrimMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.EjectorPostProcessingBuilder.TrimPartName
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.EjectorPostProcessingBuilder.TrimPartName
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.EjectorPostProcessingBuilder.TrimSufaceName
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.EjectorPostProcessingBuilder.TrimSufaceName
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.ElectrodeBlankBuilder.BlankMaterial
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.ElectrodeBlankBuilder.BlankMaterial
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.ElectrodeBlankBuilder.BlankShape
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.ElectrodeBlankBuilder.BlankShape
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.ElectrodeBlankBuilder.JointObject
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.ElectrodeBlankBuilder.JointObject
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.ElectrodeComponentBuilder.Chuck
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.ElectrodeComponentBuilder.Chuck
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.ElectrodeCopyBuilder.Copy
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.ElectrodeCopyBuilder.Copy
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.ElectrodeDeleteBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.ElectrodeDeleteBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.EnlargeSurfaceBuilder.KeepDiscardOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.EnlargeSurfaceBuilder.KeepDiscardOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.EWDraftingBuilder.CNCTemplateOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.EWDraftingBuilder.CNCTemplateOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.EWDraftingBuilder.DrawingOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.EWDraftingBuilder.DrawingOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.EWDraftingBuilder.EDMTemplateOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.EWDraftingBuilder.EDMTemplateOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.EWDraftingBuilder.ModeOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.EWDraftingBuilder.ModeOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.EWDraftingBuilder.NameOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.EWDraftingBuilder.NameOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.FaceColorManagementBuilder.HoleTypeEnumValue
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.FaceColorManagementBuilder.HoleTypeEnumValue
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.FaceSplitBuilder.FaceSplitType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.FaceSplitBuilder.FaceSplitType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.FastenerAssy.HoleOperation
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.FastenerAssy.HoleOperation
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.FastenerAssy.ModeMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.FastenerAssy.ModeMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.FastenerAssy.SelectionObjectMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.FastenerAssy.SelectionObjectMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.FastenerAssy.SelectionTypeMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.FastenerAssy.SelectionTypeMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.FastenerAssy.StackTypeMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.FastenerAssy.StackTypeMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.FlowDisplayBuilder.AnalysisResults
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.FlowDisplayBuilder.AnalysisResults
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.ForceCalculationBuilder.CalculationTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.ForceCalculationBuilder.CalculationTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.ForceCalculationBuilder.ProcessTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.ForceCalculationBuilder.ProcessTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.FormingInsertBuilder.BlankPositions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.FormingInsertBuilder.BlankPositions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.FormingInsertBuilder.BlankTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.FormingInsertBuilder.BlankTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.FormingInsertBuilder.DesignOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.FormingInsertBuilder.DesignOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.FormingInsertBuilder.ParentTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.FormingInsertBuilder.ParentTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.GeneralInsertBuilder.GenerateMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.GeneralInsertBuilder.GenerateMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.GeneralInsertBuilder.ParentOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.GeneralInsertBuilder.ParentOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.GeneralInsertBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.GeneralInsertBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.GuidedExtensionBuilder.SegmentType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.GuidedExtensionBuilder.SegmentType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.HoleManufacturingNoteBuilder.DefineByViewOrHoles
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.HoleManufacturingNoteBuilder.DefineByViewOrHoles
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.HoleManufacturingNoteBuilder.HoleIndexType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.HoleManufacturingNoteBuilder.HoleIndexType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.InitProjBuilder.ProjTempOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.InitProjBuilder.ProjTempOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.InitProjectBuilder.ConfigurationId
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.InitProjectBuilder.ConfigurationId
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.InitProjectBuilder.MaterialId
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.InitProjectBuilder.MaterialId
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.InitProjectBuilder.UnitId
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.InitProjectBuilder.UnitId
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.InsertAuxiliaryBuilder.CircOperationTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.InsertAuxiliaryBuilder.CircOperationTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.InsertAuxiliaryBuilder.DesignToolOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.InsertAuxiliaryBuilder.DesignToolOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.InsertAuxiliaryBuilder.RectOperationOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.InsertAuxiliaryBuilder.RectOperationOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.InsertAuxiliaryBuilder.ShankShapeTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.InsertAuxiliaryBuilder.ShankShapeTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.InsertAuxiliaryBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.InsertAuxiliaryBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.IntermediateStageBuilder.DesignSequences
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.IntermediateStageBuilder.DesignSequences
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.IntermediateStageBuilder.EditOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.IntermediateStageBuilder.EditOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.IntermediateStageBuilder.Orientations
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.IntermediateStageBuilder.Orientations
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.LayoutBuilder.BalNumber
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.LayoutBuilder.BalNumber
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.LayoutBuilder.LayoutSubType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.LayoutBuilder.LayoutSubType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.LayoutBuilder.LayoutType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.LayoutBuilder.LayoutType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.LayoutBuilder.XrefNum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.LayoutBuilder.XrefNum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.LayoutBuilder.YrefNum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.LayoutBuilder.YrefNum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.LayoutManagementBuilder.StationItems
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.LayoutManagementBuilder.StationItems
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.LayoutRepositionBuilder.Method
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.LayoutRepositionBuilder.Method
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.LayoutRepositionBuilder.Type
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.LayoutRepositionBuilder.Type
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder.FormabilityStrainTypeName
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder.FormabilityStrainTypeName
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder.StrainTypeName
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder.StrainTypeName
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder.StressTypeName
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder.StressTypeName
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.LsdynaGeometryPreparationBuilder.BlankOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.LsdynaGeometryPreparationBuilder.BlankOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.LsdynaGeometryPreparationBuilder.BlankPosition
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.LsdynaGeometryPreparationBuilder.BlankPosition
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.LsdynaGeometryPreparationBuilder.ContactType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.LsdynaGeometryPreparationBuilder.ContactType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.LsdynaGeometryPreparationBuilder.DrawBeadType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.LsdynaGeometryPreparationBuilder.DrawBeadType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.LsdynaGeometryPreparationBuilder.DrawType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.LsdynaGeometryPreparationBuilder.DrawType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.LsdynaGeometryPreparationBuilder.MaterialType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.LsdynaGeometryPreparationBuilder.MaterialType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.LsdynaGeometryPreparationBuilder.ProcessActionBinder
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.LsdynaGeometryPreparationBuilder.ProcessActionBinder
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.LsdynaGeometryPreparationBuilder.ProcessActionDie
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.LsdynaGeometryPreparationBuilder.ProcessActionDie
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.LsdynaGeometryPreparationBuilder.ProcessActionPunch
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.LsdynaGeometryPreparationBuilder.ProcessActionPunch
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.LsdynaGeometryPreparationBuilder.ProcessType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.LsdynaGeometryPreparationBuilder.ProcessType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.LsdynaGeometryPreparationBuilder.TargetBinder
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.LsdynaGeometryPreparationBuilder.TargetBinder
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.LsdynaGeometryPreparationBuilder.TargetDie
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.LsdynaGeometryPreparationBuilder.TargetDie
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.LsdynaGeometryPreparationBuilder.TargetPunch
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.LsdynaGeometryPreparationBuilder.TargetPunch
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.LsdynaKfileGeneratorBuilder.MeshDataType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.LsdynaKfileGeneratorBuilder.MeshDataType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.LsdynaKfileGeneratorBuilder.MeshElementType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.LsdynaKfileGeneratorBuilder.MeshElementType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.LsdynaKfileGeneratorBuilder.OperTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.LsdynaKfileGeneratorBuilder.OperTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.MoldCsysBuilder.Wcsposition
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.MoldCsysBuilder.Wcsposition
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.MoldInsertBuilder.BooleanType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.MoldInsertBuilder.BooleanType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.MotionSimulationBuilder.CamDefinitionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.MotionSimulationBuilder.CamDefinitionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.MotionSimulationBuilder.EjectorMoveOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.MotionSimulationBuilder.EjectorMoveOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.MotionSimulationBuilder.MoldbaseStyleType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.MotionSimulationBuilder.MoldbaseStyleType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.MotionSimulationBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.MotionSimulationBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.MWCopySheetsBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.MWCopySheetsBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.MWDefineRegionsBuilder.TranslucencyOptionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.MWDefineRegionsBuilder.TranslucencyOptionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.MWDesignGuideLinesBuilder.DirectionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.MWDesignGuideLinesBuilder.DirectionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.MWDesignPartingSurfaceBuilder.ObjectType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.MWDesignPartingSurfaceBuilder.ObjectType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.MWDesignPartingSurfaceBuilder.PartingSurfaceType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.MWDesignPartingSurfaceBuilder.PartingSurfaceType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.MWDesignPartingSurfaceBuilder.TransitionSurfaceType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.MWDesignPartingSurfaceBuilder.TransitionSurfaceType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.MWDesignPartingSurfaceBuilder.TrimAndExtendFromRegionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.MWDesignPartingSurfaceBuilder.TrimAndExtendFromRegionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.MWMoldedPartValidationBuilder.AssignToRegion
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.MWMoldedPartValidationBuilder.AssignToRegion
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.MWMoldedPartValidationBuilder.CalculateOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.MWMoldedPartValidationBuilder.CalculateOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.MWMoldedPartValidationBuilder.CheckScope
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.MWMoldedPartValidationBuilder.CheckScope
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.MWMoldedPartValidationBuilder.RangeType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.MWMoldedPartValidationBuilder.RangeType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.MWPartingManagerBuilder.DataStatus
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.MWPartingManagerBuilder.DataStatus
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.MWPartingManagerBuilder.RegisterType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.MWPartingManagerBuilder.RegisterType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.ObjectAttributeManagementBuilder.FilterAccordingToAttributeType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.ObjectAttributeManagementBuilder.FilterAccordingToAttributeType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.ObjectAttributeManagementBuilder.FilterType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.ObjectAttributeManagementBuilder.FilterType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.ObjectAttributeManagementBuilder.ShowComponentsType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.ObjectAttributeManagementBuilder.ShowComponentsType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.ObjectAttributeManagementBuilder.ShowType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.ObjectAttributeManagementBuilder.ShowType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.PiercingInsertBuilder.AssociationToolType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.PiercingInsertBuilder.AssociationToolType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.PiercingInsertBuilder.DieInsertTypeItems
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.PiercingInsertBuilder.DieInsertTypeItems
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.PiercingInsertBuilder.InsertPosition
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.PiercingInsertBuilder.InsertPosition
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.PiercingInsertBuilder.NormalBbpslugType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.PiercingInsertBuilder.NormalBbpslugType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.PiercingInsertBuilder.NormalCavityType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.PiercingInsertBuilder.NormalCavityType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.PiercingInsertBuilder.NormalClearanceOptionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.PiercingInsertBuilder.NormalClearanceOptionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.PiercingInsertBuilder.NormalDsslugType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.PiercingInsertBuilder.NormalDsslugType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.PiercingInsertBuilder.NormalOffsetSideType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.PiercingInsertBuilder.NormalOffsetSideType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.PiercingInsertBuilder.NormalUdpparentPartType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.PiercingInsertBuilder.NormalUdpparentPartType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.PiercingInsertBuilder.PunchPocketTypeItemsBP
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.PiercingInsertBuilder.PunchPocketTypeItemsBP
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.PiercingInsertBuilder.PunchPocketTypeItemsPP
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.PiercingInsertBuilder.PunchPocketTypeItemsPP
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.PiercingInsertBuilder.PunchPocketTypeItemsSP
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.PiercingInsertBuilder.PunchPocketTypeItemsSP
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.PiercingInsertBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.PiercingInsertBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.PocketBuilder.ModeType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.PocketBuilder.ModeType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.PocketBuilder.RsetType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.PocketBuilder.RsetType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.PocketBuilder.ToolType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.PocketBuilder.ToolType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.PrebendBuilder.NumberBendsOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.PrebendBuilder.NumberBendsOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.QuickQuotationBuilder.DesignTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.QuickQuotationBuilder.DesignTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.QuickQuotationBuilder.InsertGroupMaterials
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.QuickQuotationBuilder.InsertGroupMaterials
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.QuickQuotationBuilder.ManageTemporaryObjectsTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.QuickQuotationBuilder.ManageTemporaryObjectsTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.QuickQuotationBuilder.ObjectTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.QuickQuotationBuilder.ObjectTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.QuickQuotationBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.QuickQuotationBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.ReliefDesignBuilder.Method
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.ReliefDesignBuilder.Method
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.ReliefDesignBuilder.MethodOfDelete
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.ReliefDesignBuilder.MethodOfDelete
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.ReliefDesignBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.ReliefDesignBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.RemoveHolesBuilder.SelectionTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.RemoveHolesBuilder.SelectionTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.ReusableObjectPasteBuilder.PasteMethods
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.ReusableObjectPasteBuilder.PasteMethods
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.ReusablePocketBuilder.Hole
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.ReusablePocketBuilder.Hole
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.RunnerBuilder.GuideEndType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.RunnerBuilder.GuideEndType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.RunnerBuilder.SectionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.RunnerBuilder.SectionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.ScrapDesignBuilder.AddonType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.ScrapDesignBuilder.AddonType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.ScrapDesignBuilder.Body
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.ScrapDesignBuilder.Body
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.ScrapDesignBuilder.DefScrapType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.ScrapDesignBuilder.DefScrapType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.ScrapDesignBuilder.EditScrapType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.ScrapDesignBuilder.EditScrapType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.ScrapDesignBuilder.OvercutType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.ScrapDesignBuilder.OvercutType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.ScrapDesignBuilder.RemoveType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.ScrapDesignBuilder.RemoveType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.ScrapDesignBuilder.ScrapDefPosition
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.ScrapDesignBuilder.ScrapDefPosition
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.ScrapDesignBuilder.ScrapDefType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.ScrapDesignBuilder.ScrapDefType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.ScrapDesignBuilder.TrimNumType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.ScrapDesignBuilder.TrimNumType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.ShimBuilder.ParentOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.ShimBuilder.ParentOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.ShimBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.ShimBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.SolidPatchBuilder.SolidPatchType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.SolidPatchBuilder.SolidPatchType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.SpecifyBaffleBuilder.AttributeTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.SpecifyBaffleBuilder.AttributeTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.SplitSolidBuilder.OperationType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.SplitSolidBuilder.OperationType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.SplitSolidBuilder.ToolObjectOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.SplitSolidBuilder.ToolObjectOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.SpreadsheetData.KeywordType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.SpreadsheetData.KeywordType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.SpreadsheetData.ParameterStatus
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.SpreadsheetData.ParameterStatus
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.SpreadsheetDataParameter.Status
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.SpreadsheetDataParameter.Status
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.StandardPartBuilder.EditType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.StandardPartBuilder.EditType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.StandardPartBuilder.RefsetName
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.StandardPartBuilder.RefsetName
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.StripLayoutBuilder.FromStationType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.StripLayoutBuilder.FromStationType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.StripLayoutBuilder.ToStationType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.StripLayoutBuilder.ToStationType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.SubInsertBuilder.Shape
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.SubInsertBuilder.Shape
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.SubInsertBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.SubInsertBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.ToolingApplication
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.ToolingApplication
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.ToolingCloneaction
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.ToolingCloneaction
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.ToolingClonemethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.ToolingClonemethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.ToolingCloneparttype
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.ToolingCloneparttype
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.TrimMoldComponentsBuilder.TargetScope
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.TrimMoldComponentsBuilder.TargetScope
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.TrimMoldComponentsBuilder.TrimMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.TrimMoldComponentsBuilder.TrimMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.TrimMoldComponentsBuilder.TrimPartName
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.TrimMoldComponentsBuilder.TrimPartName
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.TrimMoldComponentsBuilder.TrimSurfaceName
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.TrimMoldComponentsBuilder.TrimSurfaceName
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.TrimRegionBuilder.BoundaryOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.TrimRegionBuilder.BoundaryOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.TrimRegionBuilder.RegionOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.TrimRegionBuilder.RegionOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.TrimSolidBuilder.TrimSolidAction
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.TrimSolidBuilder.TrimSolidAction
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.TrimSolidBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.TrimSolidBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.UniversalUnformBuilder.BendTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.UniversalUnformBuilder.BendTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.UnusedFileManagementBuilder.FileDirectory
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.UnusedFileManagementBuilder.FileDirectory
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.ValidCheckBuilder.AnalysisMode
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.ValidCheckBuilder.AnalysisMode
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.ValidCheckBuilder.CheckingType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.ValidCheckBuilder.CheckingType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.ValidCheckBuilder.SelMode
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.ValidCheckBuilder.SelMode
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.WallThicknessCheckerBuilder.CalculateMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.WallThicknessCheckerBuilder.CalculateMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.WallThicknessCheckerBuilder.LegendControl
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.WallThicknessCheckerBuilder.LegendControl
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.WallThicknessCheckerBuilder.RangeType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.WallThicknessCheckerBuilder.RangeType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.WorkpieceBuilder.MethodType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.WorkpieceBuilder.MethodType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.WorkpieceBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.WorkpieceBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.tooling.WorkpieceBuilder.WorkPieceType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.tooling.WorkpieceBuilder.WorkPieceType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.uf.UF.CallbackReason
-
- valueOf(String) - Static method in class nxopen.uf.UF.CallbackReason
-
- valueOf(int) - Static method in class nxopen.uf.UF.Codeset
-
- valueOf(String) - Static method in class nxopen.uf.UF.Codeset
-
- valueOf(int) - Static method in class nxopen.uf.UFAssem.ExplStatus
-
- valueOf(String) - Static method in class nxopen.uf.UFAssem.ExplStatus
-
- valueOf(int) - Static method in class nxopen.uf.UFAssem.LevelOption
-
- valueOf(String) - Static method in class nxopen.uf.UFAssem.LevelOption
-
- valueOf(int) - Static method in class nxopen.uf.UFBrep.GeomType
-
- valueOf(String) - Static method in class nxopen.uf.UFBrep.GeomType
-
- valueOf(int) - Static method in class nxopen.uf.UFBrep.Orientation
-
- valueOf(String) - Static method in class nxopen.uf.UFBrep.Orientation
-
- valueOf(int) - Static method in class nxopen.uf.UFBrep.TopoSource
-
- valueOf(String) - Static method in class nxopen.uf.UFBrep.TopoSource
-
- valueOf(int) - Static method in class nxopen.uf.UFBrep.TopoType
-
- valueOf(String) - Static method in class nxopen.uf.UFBrep.TopoType
-
- valueOf(int) - Static method in class nxopen.uf.UFCam.AvoidanceType
-
- valueOf(String) - Static method in class nxopen.uf.UFCam.AvoidanceType
-
- valueOf(int) - Static method in class nxopen.uf.UFCam.BlankGeomType
-
- valueOf(String) - Static method in class nxopen.uf.UFCam.BlankGeomType
-
- valueOf(int) - Static method in class nxopen.uf.UFCam.BoundaryType
-
- valueOf(String) - Static method in class nxopen.uf.UFCam.BoundaryType
-
- valueOf(int) - Static method in class nxopen.uf.UFCam.FeedrateUnit
-
- valueOf(String) - Static method in class nxopen.uf.UFCam.FeedrateUnit
-
- valueOf(int) - Static method in class nxopen.uf.UFCam.GeomType
-
- valueOf(String) - Static method in class nxopen.uf.UFCam.GeomType
-
- valueOf(int) - Static method in class nxopen.uf.UFCam.MaterialSide
-
- valueOf(String) - Static method in class nxopen.uf.UFCam.MaterialSide
-
- valueOf(int) - Static method in class nxopen.uf.UFCam.OptStypeCls
-
- valueOf(String) - Static method in class nxopen.uf.UFCam.OptStypeCls
-
- valueOf(int) - Static method in class nxopen.uf.UFCam.ToolPosition
-
- valueOf(String) - Static method in class nxopen.uf.UFCam.ToolPosition
-
- valueOf(int) - Static method in class nxopen.uf.UFCambnd.UdeSetType
-
- valueOf(String) - Static method in class nxopen.uf.UFCambnd.UdeSetType
-
- valueOf(int) - Static method in class nxopen.uf.UFCamgeom.CustomPointType
-
- valueOf(String) - Static method in class nxopen.uf.UFCamgeom.CustomPointType
-
- valueOf(int) - Static method in class nxopen.uf.UFCamPref.CamPref
-
- valueOf(String) - Static method in class nxopen.uf.UFCamPref.CamPref
-
- valueOf(int) - Static method in class nxopen.uf.UFCgm.Colors
-
- valueOf(String) - Static method in class nxopen.uf.UFCgm.Colors
-
- valueOf(int) - Static method in class nxopen.uf.UFCgm.ExportReason
-
- valueOf(String) - Static method in class nxopen.uf.UFCgm.ExportReason
-
- valueOf(int) - Static method in class nxopen.uf.UFCgm.Fonts
-
- valueOf(String) - Static method in class nxopen.uf.UFCgm.Fonts
-
- valueOf(int) - Static method in class nxopen.uf.UFCgm.SizeMode
-
- valueOf(String) - Static method in class nxopen.uf.UFCgm.SizeMode
-
- valueOf(int) - Static method in class nxopen.uf.UFCgm.TextMode
-
- valueOf(String) - Static method in class nxopen.uf.UFCgm.TextMode
-
- valueOf(int) - Static method in class nxopen.uf.UFCgm.Units
-
- valueOf(String) - Static method in class nxopen.uf.UFCgm.Units
-
- valueOf(int) - Static method in class nxopen.uf.UFCgm.VdcMode
-
- valueOf(String) - Static method in class nxopen.uf.UFCgm.VdcMode
-
- valueOf(int) - Static method in class nxopen.uf.UFCgm.Widths
-
- valueOf(String) - Static method in class nxopen.uf.UFCgm.Widths
-
- valueOf(int) - Static method in class nxopen.uf.UFCgm.WidthSingle
-
- valueOf(String) - Static method in class nxopen.uf.UFCgm.WidthSingle
-
- valueOf(int) - Static method in class nxopen.uf.UFCgm.WidthUse
-
- valueOf(String) - Static method in class nxopen.uf.UFCgm.WidthUse
-
- valueOf(int) - Static method in class nxopen.uf.UFClone.Action
-
- valueOf(String) - Static method in class nxopen.uf.UFClone.Action
-
- valueOf(int) - Static method in class nxopen.uf.UFClone.CloneRelCae
-
- valueOf(String) - Static method in class nxopen.uf.UFClone.CloneRelCae
-
- valueOf(int) - Static method in class nxopen.uf.UFClone.ConvertCb
-
- valueOf(String) - Static method in class nxopen.uf.UFClone.ConvertCb
-
- valueOf(int) - Static method in class nxopen.uf.UFClone.FamilyTreatment
-
- valueOf(String) - Static method in class nxopen.uf.UFClone.FamilyTreatment
-
- valueOf(int) - Static method in class nxopen.uf.UFClone.NameRuleType
-
- valueOf(String) - Static method in class nxopen.uf.UFClone.NameRuleType
-
- valueOf(int) - Static method in class nxopen.uf.UFClone.NamingTechnique
-
- valueOf(String) - Static method in class nxopen.uf.UFClone.NamingTechnique
-
- valueOf(int) - Static method in class nxopen.uf.UFClone.NotifyCb
-
- valueOf(String) - Static method in class nxopen.uf.UFClone.NotifyCb
-
- valueOf(int) - Static method in class nxopen.uf.UFClone.OperationClass
-
- valueOf(String) - Static method in class nxopen.uf.UFClone.OperationClass
-
- valueOf(int) - Static method in class nxopen.uf.UFClone.PartStateS
-
- valueOf(String) - Static method in class nxopen.uf.UFClone.PartStateS
-
- valueOf(int) - Static method in class nxopen.uf.UFClone.ValidationMode
-
- valueOf(String) - Static method in class nxopen.uf.UFClone.ValidationMode
-
- valueOf(int) - Static method in class nxopen.uf.UFCurve.AssoArcSubtype
-
- valueOf(String) - Static method in class nxopen.uf.UFCurve.AssoArcSubtype
-
- valueOf(int) - Static method in class nxopen.uf.UFCurve.BridgeMethod
-
- valueOf(String) - Static method in class nxopen.uf.UFCurve.BridgeMethod
-
- valueOf(int) - Static method in class nxopen.uf.UFCurve.ConstraintType
-
- valueOf(String) - Static method in class nxopen.uf.UFCurve.ConstraintType
-
- valueOf(int) - Static method in class nxopen.uf.UFCurve.Direction
-
- valueOf(String) - Static method in class nxopen.uf.UFCurve.Direction
-
- valueOf(int) - Static method in class nxopen.uf.UFCurve.EndType
-
- valueOf(String) - Static method in class nxopen.uf.UFCurve.EndType
-
- valueOf(int) - Static method in class nxopen.uf.UFCurve.HelpDataType
-
- valueOf(String) - Static method in class nxopen.uf.UFCurve.HelpDataType
-
- valueOf(int) - Static method in class nxopen.uf.UFCurve.JoinTypes
-
- valueOf(String) - Static method in class nxopen.uf.UFCurve.JoinTypes
-
- valueOf(int) - Static method in class nxopen.uf.UFCurve.LimitType
-
- valueOf(String) - Static method in class nxopen.uf.UFCurve.LimitType
-
- valueOf(int) - Static method in class nxopen.uf.UFCurve.LineArcType
-
- valueOf(String) - Static method in class nxopen.uf.UFCurve.LineArcType
-
- valueOf(int) - Static method in class nxopen.uf.UFCurve.OcfCrossBoundaries
-
- valueOf(String) - Static method in class nxopen.uf.UFCurve.OcfCrossBoundaries
-
- valueOf(int) - Static method in class nxopen.uf.UFCurve.OcfMethod
-
- valueOf(String) - Static method in class nxopen.uf.UFCurve.OcfMethod
-
- valueOf(int) - Static method in class nxopen.uf.UFCurve.OcfSpanMethod
-
- valueOf(String) - Static method in class nxopen.uf.UFCurve.OcfSpanMethod
-
- valueOf(int) - Static method in class nxopen.uf.UFCurve.OcfTrimMethod
-
- valueOf(String) - Static method in class nxopen.uf.UFCurve.OcfTrimMethod
-
- valueOf(int) - Static method in class nxopen.uf.UFCurve.OffsetType
-
- valueOf(String) - Static method in class nxopen.uf.UFCurve.OffsetType
-
- valueOf(int) - Static method in class nxopen.uf.UFCurve.PrincipalAxis
-
- valueOf(String) - Static method in class nxopen.uf.UFCurve.PrincipalAxis
-
- valueOf(int) - Static method in class nxopen.uf.UFCurve.TrimOpts
-
- valueOf(String) - Static method in class nxopen.uf.UFCurve.TrimOpts
-
- valueOf(int) - Static method in class nxopen.uf.UFCurve.WrapType
-
- valueOf(String) - Static method in class nxopen.uf.UFCurve.WrapType
-
- valueOf(int) - Static method in class nxopen.uf.UFDieeng.Opts
-
- valueOf(String) - Static method in class nxopen.uf.UFDieeng.Opts
-
- valueOf(int) - Static method in class nxopen.uf.UFDisp.BackgroundColor
-
- valueOf(String) - Static method in class nxopen.uf.UFDisp.BackgroundColor
-
- valueOf(int) - Static method in class nxopen.uf.UFDisp.ColorName
-
- valueOf(String) - Static method in class nxopen.uf.UFDisp.ColorName
-
- valueOf(int) - Static method in class nxopen.uf.UFDisp.Context
-
- valueOf(String) - Static method in class nxopen.uf.UFDisp.Context
-
- valueOf(int) - Static method in class nxopen.uf.UFDisp.GridContext
-
- valueOf(String) - Static method in class nxopen.uf.UFDisp.GridContext
-
- valueOf(int) - Static method in class nxopen.uf.UFDisp.GridType
-
- valueOf(String) - Static method in class nxopen.uf.UFDisp.GridType
-
- valueOf(int) - Static method in class nxopen.uf.UFDisp.ImageFormat
-
- valueOf(String) - Static method in class nxopen.uf.UFDisp.ImageFormat
-
- valueOf(int) - Static method in class nxopen.uf.UFDisp.MaterialSource
-
- valueOf(String) - Static method in class nxopen.uf.UFDisp.MaterialSource
-
- valueOf(int) - Static method in class nxopen.uf.UFDisp.PolyMarker
-
- valueOf(String) - Static method in class nxopen.uf.UFDisp.PolyMarker
-
- valueOf(int) - Static method in class nxopen.uf.UFDisp.ShadeDisplay
-
- valueOf(String) - Static method in class nxopen.uf.UFDisp.ShadeDisplay
-
- valueOf(int) - Static method in class nxopen.uf.UFDisp.ShadeFormat
-
- valueOf(String) - Static method in class nxopen.uf.UFDisp.ShadeFormat
-
- valueOf(int) - Static method in class nxopen.uf.UFDisp.ShadeMethod
-
- valueOf(String) - Static method in class nxopen.uf.UFDisp.ShadeMethod
-
- valueOf(int) - Static method in class nxopen.uf.UFDisp.ShadePlot
-
- valueOf(String) - Static method in class nxopen.uf.UFDisp.ShadePlot
-
- valueOf(int) - Static method in class nxopen.uf.UFDisp.TextRef
-
- valueOf(String) - Static method in class nxopen.uf.UFDisp.TextRef
-
- valueOf(int) - Static method in class nxopen.uf.UFDisp.TextureSpaceType
-
- valueOf(String) - Static method in class nxopen.uf.UFDisp.TextureSpaceType
-
- valueOf(int) - Static method in class nxopen.uf.UFDisp.ViewType
-
- valueOf(String) - Static method in class nxopen.uf.UFDisp.ViewType
-
- valueOf(int) - Static method in class nxopen.uf.UFDisp.WmfOutput
-
- valueOf(String) - Static method in class nxopen.uf.UFDisp.WmfOutput
-
- valueOf(int) - Static method in class nxopen.uf.UFDpud.ProjOption
-
- valueOf(String) - Static method in class nxopen.uf.UFDpud.ProjOption
-
- valueOf(int) - Static method in class nxopen.uf.UFDpud.Purpose
-
- valueOf(String) - Static method in class nxopen.uf.UFDpud.Purpose
-
- valueOf(int) - Static method in class nxopen.uf.UFDpud.TaxisOption
-
- valueOf(String) - Static method in class nxopen.uf.UFDpud.TaxisOption
-
- valueOf(int) - Static method in class nxopen.uf.UFDraw.ArwHeadCntl
-
- valueOf(String) - Static method in class nxopen.uf.UFDraw.ArwHeadCntl
-
- valueOf(int) - Static method in class nxopen.uf.UFDraw.ArwHeadType
-
- valueOf(String) - Static method in class nxopen.uf.UFDraw.ArwHeadType
-
- valueOf(int) - Static method in class nxopen.uf.UFDraw.BoundaryType
-
- valueOf(String) - Static method in class nxopen.uf.UFDraw.BoundaryType
-
- valueOf(int) - Static method in class nxopen.uf.UFDraw.BreakPositionType
-
- valueOf(String) - Static method in class nxopen.uf.UFDraw.BreakPositionType
-
- valueOf(int) - Static method in class nxopen.uf.UFDraw.CompSectionInView
-
- valueOf(String) - Static method in class nxopen.uf.UFDraw.CompSectionInView
-
- valueOf(int) - Static method in class nxopen.uf.UFDraw.EdgeHidingEdge
-
- valueOf(String) - Static method in class nxopen.uf.UFDraw.EdgeHidingEdge
-
- valueOf(int) - Static method in class nxopen.uf.UFDraw.ExtractedEdges
-
- valueOf(String) - Static method in class nxopen.uf.UFDraw.ExtractedEdges
-
- valueOf(int) - Static method in class nxopen.uf.UFDraw.Gap
-
- valueOf(String) - Static method in class nxopen.uf.UFDraw.Gap
-
- valueOf(int) - Static method in class nxopen.uf.UFDraw.HiddenLine
-
- valueOf(String) - Static method in class nxopen.uf.UFDraw.HiddenLine
-
- valueOf(int) - Static method in class nxopen.uf.UFDraw.LabelOnParentType
-
- valueOf(String) - Static method in class nxopen.uf.UFDraw.LabelOnParentType
-
- valueOf(int) - Static method in class nxopen.uf.UFDraw.ProjDir
-
- valueOf(String) - Static method in class nxopen.uf.UFDraw.ProjDir
-
- valueOf(int) - Static method in class nxopen.uf.UFDraw.ProjectionAngle
-
- valueOf(String) - Static method in class nxopen.uf.UFDraw.ProjectionAngle
-
- valueOf(int) - Static method in class nxopen.uf.UFDraw.SecondaryIndexingAlign
-
- valueOf(String) - Static method in class nxopen.uf.UFDraw.SecondaryIndexingAlign
-
- valueOf(int) - Static method in class nxopen.uf.UFDraw.Silhouette
-
- valueOf(String) - Static method in class nxopen.uf.UFDraw.Silhouette
-
- valueOf(int) - Static method in class nxopen.uf.UFDraw.SizeState
-
- valueOf(String) - Static method in class nxopen.uf.UFDraw.SizeState
-
- valueOf(int) - Static method in class nxopen.uf.UFDraw.Smooth
-
- valueOf(String) - Static method in class nxopen.uf.UFDraw.Smooth
-
- valueOf(int) - Static method in class nxopen.uf.UFDraw.SxAssyXhatch
-
- valueOf(String) - Static method in class nxopen.uf.UFDraw.SxAssyXhatch
-
- valueOf(int) - Static method in class nxopen.uf.UFDraw.SxBackground
-
- valueOf(String) - Static method in class nxopen.uf.UFDraw.SxBackground
-
- valueOf(int) - Static method in class nxopen.uf.UFDraw.SxCrosshatch
-
- valueOf(String) - Static method in class nxopen.uf.UFDraw.SxCrosshatch
-
- valueOf(int) - Static method in class nxopen.uf.UFDraw.SxlineDisplay
-
- valueOf(String) - Static method in class nxopen.uf.UFDraw.SxlineDisplay
-
- valueOf(int) - Static method in class nxopen.uf.UFDraw.SxlineLeg
-
- valueOf(String) - Static method in class nxopen.uf.UFDraw.SxlineLeg
-
- valueOf(int) - Static method in class nxopen.uf.UFDraw.SxlineStatus
-
- valueOf(String) - Static method in class nxopen.uf.UFDraw.SxlineStatus
-
- valueOf(int) - Static method in class nxopen.uf.UFDraw.SxlineType
-
- valueOf(String) - Static method in class nxopen.uf.UFDraw.SxlineType
-
- valueOf(int) - Static method in class nxopen.uf.UFDraw.SxSectionSheetBody
-
- valueOf(String) - Static method in class nxopen.uf.UFDraw.SxSectionSheetBody
-
- valueOf(int) - Static method in class nxopen.uf.UFDraw.SxsegHighlight
-
- valueOf(String) - Static method in class nxopen.uf.UFDraw.SxsegHighlight
-
- valueOf(int) - Static method in class nxopen.uf.UFDraw.SxsegMode
-
- valueOf(String) - Static method in class nxopen.uf.UFDraw.SxsegMode
-
- valueOf(int) - Static method in class nxopen.uf.UFDraw.SxsegType
-
- valueOf(String) - Static method in class nxopen.uf.UFDraw.SxsegType
-
- valueOf(int) - Static method in class nxopen.uf.UFDraw.TabnotBorderType
-
- valueOf(String) - Static method in class nxopen.uf.UFDraw.TabnotBorderType
-
- valueOf(int) - Static method in class nxopen.uf.UFDraw.TabnotJust
-
- valueOf(String) - Static method in class nxopen.uf.UFDraw.TabnotJust
-
- valueOf(int) - Static method in class nxopen.uf.UFDraw.Uvhatch
-
- valueOf(String) - Static method in class nxopen.uf.UFDraw.Uvhatch
-
- valueOf(int) - Static method in class nxopen.uf.UFDraw.ViewLabelLetterFormat
-
- valueOf(String) - Static method in class nxopen.uf.UFDraw.ViewLabelLetterFormat
-
- valueOf(int) - Static method in class nxopen.uf.UFDraw.ViewLabelParmType
-
- valueOf(String) - Static method in class nxopen.uf.UFDraw.ViewLabelParmType
-
- valueOf(int) - Static method in class nxopen.uf.UFDraw.ViewLabelPosition
-
- valueOf(String) - Static method in class nxopen.uf.UFDraw.ViewLabelPosition
-
- valueOf(int) - Static method in class nxopen.uf.UFDraw.ViewLabelScaleFormat
-
- valueOf(String) - Static method in class nxopen.uf.UFDraw.ViewLabelScaleFormat
-
- valueOf(int) - Static method in class nxopen.uf.UFDraw.ViewLabelScalePosition
-
- valueOf(String) - Static method in class nxopen.uf.UFDraw.ViewLabelScalePosition
-
- valueOf(int) - Static method in class nxopen.uf.UFDraw.ViewLabelViewTextType
-
- valueOf(String) - Static method in class nxopen.uf.UFDraw.ViewLabelViewTextType
-
- valueOf(int) - Static method in class nxopen.uf.UFDraw.ViewStatus
-
- valueOf(String) - Static method in class nxopen.uf.UFDraw.ViewStatus
-
- valueOf(int) - Static method in class nxopen.uf.UFDraw.VirtualIntersect
-
- valueOf(String) - Static method in class nxopen.uf.UFDraw.VirtualIntersect
-
- valueOf(int) - Static method in class nxopen.uf.UFDrf.AlignPosition
-
- valueOf(String) - Static method in class nxopen.uf.UFDrf.AlignPosition
-
- valueOf(int) - Static method in class nxopen.uf.UFDrf.AngularSuppressZeros
-
- valueOf(String) - Static method in class nxopen.uf.UFDrf.AngularSuppressZeros
-
- valueOf(int) - Static method in class nxopen.uf.UFDrf.AngularUnits
-
- valueOf(String) - Static method in class nxopen.uf.UFDrf.AngularUnits
-
- valueOf(int) - Static method in class nxopen.uf.UFDrf.AppendedTextLocation
-
- valueOf(String) - Static method in class nxopen.uf.UFDrf.AppendedTextLocation
-
- valueOf(int) - Static method in class nxopen.uf.UFDrf.AreaFillMaterial
-
- valueOf(String) - Static method in class nxopen.uf.UFDrf.AreaFillMaterial
-
- valueOf(int) - Static method in class nxopen.uf.UFDrf.ArrowDisplay
-
- valueOf(String) - Static method in class nxopen.uf.UFDrf.ArrowDisplay
-
- valueOf(int) - Static method in class nxopen.uf.UFDrf.ArrowFillType
-
- valueOf(String) - Static method in class nxopen.uf.UFDrf.ArrowFillType
-
- valueOf(int) - Static method in class nxopen.uf.UFDrf.ArrowheadAndFillType
-
- valueOf(String) - Static method in class nxopen.uf.UFDrf.ArrowheadAndFillType
-
- valueOf(int) - Static method in class nxopen.uf.UFDrf.ArrowType
-
- valueOf(String) - Static method in class nxopen.uf.UFDrf.ArrowType
-
- valueOf(int) - Static method in class nxopen.uf.UFDrf.AssociativeOriginType
-
- valueOf(String) - Static method in class nxopen.uf.UFDrf.AssociativeOriginType
-
- valueOf(int) - Static method in class nxopen.uf.UFDrf.AssocLineType
-
- valueOf(String) - Static method in class nxopen.uf.UFDrf.AssocLineType
-
- valueOf(int) - Static method in class nxopen.uf.UFDrf.AssocType
-
- valueOf(String) - Static method in class nxopen.uf.UFDrf.AssocType
-
- valueOf(int) - Static method in class nxopen.uf.UFDrf.ChamferDimensionForm
-
- valueOf(String) - Static method in class nxopen.uf.UFDrf.ChamferDimensionForm
-
- valueOf(int) - Static method in class nxopen.uf.UFDrf.ChamferDimensionLeaderType
-
- valueOf(String) - Static method in class nxopen.uf.UFDrf.ChamferDimensionLeaderType
-
- valueOf(int) - Static method in class nxopen.uf.UFDrf.ChamferDimensionStubType
-
- valueOf(String) - Static method in class nxopen.uf.UFDrf.ChamferDimensionStubType
-
- valueOf(int) - Static method in class nxopen.uf.UFDrf.ChamferDimensionSymbolType
-
- valueOf(String) - Static method in class nxopen.uf.UFDrf.ChamferDimensionSymbolType
-
- valueOf(int) - Static method in class nxopen.uf.UFDrf.CustomSymbolTextType
-
- valueOf(String) - Static method in class nxopen.uf.UFDrf.CustomSymbolTextType
-
- valueOf(int) - Static method in class nxopen.uf.UFDrf.DecimalPointCharacter
-
- valueOf(String) - Static method in class nxopen.uf.UFDrf.DecimalPointCharacter
-
- valueOf(int) - Static method in class nxopen.uf.UFDrf.DiameterRadiusPlacement
-
- valueOf(String) - Static method in class nxopen.uf.UFDrf.DiameterRadiusPlacement
-
- valueOf(int) - Static method in class nxopen.uf.UFDrf.DiameterSymbol
-
- valueOf(String) - Static method in class nxopen.uf.UFDrf.DiameterSymbol
-
- valueOf(int) - Static method in class nxopen.uf.UFDrf.DimensionOrientation
-
- valueOf(String) - Static method in class nxopen.uf.UFDrf.DimensionOrientation
-
- valueOf(int) - Static method in class nxopen.uf.UFDrf.DoglegType
-
- valueOf(String) - Static method in class nxopen.uf.UFDrf.DoglegType
-
- valueOf(int) - Static method in class nxopen.uf.UFDrf.DualDimensionFormat
-
- valueOf(String) - Static method in class nxopen.uf.UFDrf.DualDimensionFormat
-
- valueOf(int) - Static method in class nxopen.uf.UFDrf.ExtensionLineDisplay
-
- valueOf(String) - Static method in class nxopen.uf.UFDrf.ExtensionLineDisplay
-
- valueOf(int) - Static method in class nxopen.uf.UFDrf.FractionDenominator
-
- valueOf(String) - Static method in class nxopen.uf.UFDrf.FractionDenominator
-
- valueOf(int) - Static method in class nxopen.uf.UFDrf.FractionType
-
- valueOf(String) - Static method in class nxopen.uf.UFDrf.FractionType
-
- valueOf(int) - Static method in class nxopen.uf.UFDrf.FrameCorner
-
- valueOf(String) - Static method in class nxopen.uf.UFDrf.FrameCorner
-
- valueOf(int) - Static method in class nxopen.uf.UFDrf.IdSymbolType
-
- valueOf(String) - Static method in class nxopen.uf.UFDrf.IdSymbolType
-
- valueOf(int) - Static method in class nxopen.uf.UFDrf.InheritType
-
- valueOf(String) - Static method in class nxopen.uf.UFDrf.InheritType
-
- valueOf(int) - Static method in class nxopen.uf.UFDrf.InspectionType
-
- valueOf(String) - Static method in class nxopen.uf.UFDrf.InspectionType
-
- valueOf(int) - Static method in class nxopen.uf.UFDrf.LeaderAttachType
-
- valueOf(String) - Static method in class nxopen.uf.UFDrf.LeaderAttachType
-
- valueOf(int) - Static method in class nxopen.uf.UFDrf.LeaderMode
-
- valueOf(String) - Static method in class nxopen.uf.UFDrf.LeaderMode
-
- valueOf(int) - Static method in class nxopen.uf.UFDrf.LeaderOrientation
-
- valueOf(String) - Static method in class nxopen.uf.UFDrf.LeaderOrientation
-
- valueOf(int) - Static method in class nxopen.uf.UFDrf.LeaderSide
-
- valueOf(String) - Static method in class nxopen.uf.UFDrf.LeaderSide
-
- valueOf(int) - Static method in class nxopen.uf.UFDrf.LeaderType
-
- valueOf(String) - Static method in class nxopen.uf.UFDrf.LeaderType
-
- valueOf(int) - Static method in class nxopen.uf.UFDrf.LinearUnits
-
- valueOf(String) - Static method in class nxopen.uf.UFDrf.LinearUnits
-
- valueOf(int) - Static method in class nxopen.uf.UFDrf.LineWidth
-
- valueOf(String) - Static method in class nxopen.uf.UFDrf.LineWidth
-
- valueOf(int) - Static method in class nxopen.uf.UFDrf.NarrowDimensionDisplayType
-
- valueOf(String) - Static method in class nxopen.uf.UFDrf.NarrowDimensionDisplayType
-
- valueOf(int) - Static method in class nxopen.uf.UFDrf.NarrowDimensionTextOrientation
-
- valueOf(String) - Static method in class nxopen.uf.UFDrf.NarrowDimensionTextOrientation
-
- valueOf(int) - Static method in class nxopen.uf.UFDrf.ObjectAssocLineType
-
- valueOf(String) - Static method in class nxopen.uf.UFDrf.ObjectAssocLineType
-
- valueOf(int) - Static method in class nxopen.uf.UFDrf.ObjectAssocPointType
-
- valueOf(String) - Static method in class nxopen.uf.UFDrf.ObjectAssocPointType
-
- valueOf(int) - Static method in class nxopen.uf.UFDrf.OrdarrowLineType
-
- valueOf(String) - Static method in class nxopen.uf.UFDrf.OrdarrowLineType
-
- valueOf(int) - Static method in class nxopen.uf.UFDrf.OrdoriginDisplayType
-
- valueOf(String) - Static method in class nxopen.uf.UFDrf.OrdoriginDisplayType
-
- valueOf(int) - Static method in class nxopen.uf.UFDrf.QuadrantType
-
- valueOf(String) - Static method in class nxopen.uf.UFDrf.QuadrantType
-
- valueOf(int) - Static method in class nxopen.uf.UFDrf.RadiusSymbol
-
- valueOf(String) - Static method in class nxopen.uf.UFDrf.RadiusSymbol
-
- valueOf(int) - Static method in class nxopen.uf.UFDrf.ReferenceSymbolType
-
- valueOf(String) - Static method in class nxopen.uf.UFDrf.ReferenceSymbolType
-
- valueOf(int) - Static method in class nxopen.uf.UFDrf.RetainedState
-
- valueOf(String) - Static method in class nxopen.uf.UFDrf.RetainedState
-
- valueOf(int) - Static method in class nxopen.uf.UFDrf.StackAlignPosition
-
- valueOf(String) - Static method in class nxopen.uf.UFDrf.StackAlignPosition
-
- valueOf(int) - Static method in class nxopen.uf.UFDrf.SymbolConnectionType
-
- valueOf(String) - Static method in class nxopen.uf.UFDrf.SymbolConnectionType
-
- valueOf(int) - Static method in class nxopen.uf.UFDrf.TextAboveLeader
-
- valueOf(String) - Static method in class nxopen.uf.UFDrf.TextAboveLeader
-
- valueOf(int) - Static method in class nxopen.uf.UFDrf.TextArrowPlacement
-
- valueOf(String) - Static method in class nxopen.uf.UFDrf.TextArrowPlacement
-
- valueOf(int) - Static method in class nxopen.uf.UFDrf.TextJust
-
- valueOf(String) - Static method in class nxopen.uf.UFDrf.TextJust
-
- valueOf(int) - Static method in class nxopen.uf.UFDrf.TextType
-
- valueOf(String) - Static method in class nxopen.uf.UFDrf.TextType
-
- valueOf(int) - Static method in class nxopen.uf.UFDrf.TolerancePlacement
-
- valueOf(String) - Static method in class nxopen.uf.UFDrf.TolerancePlacement
-
- valueOf(int) - Static method in class nxopen.uf.UFDrf.ToleranceType
-
- valueOf(String) - Static method in class nxopen.uf.UFDrf.ToleranceType
-
- valueOf(int) - Static method in class nxopen.uf.UFDrf.TrimDimLineStyle
-
- valueOf(String) - Static method in class nxopen.uf.UFDrf.TrimDimLineStyle
-
- valueOf(int) - Static method in class nxopen.uf.UFDrf.UdsSizeType
-
- valueOf(String) - Static method in class nxopen.uf.UFDrf.UdsSizeType
-
- valueOf(int) - Static method in class nxopen.uf.UFDrf.UdSymbolPenType
-
- valueOf(String) - Static method in class nxopen.uf.UFDrf.UdSymbolPenType
-
- valueOf(int) - Static method in class nxopen.uf.UFDrf.ValidClineForm
-
- valueOf(String) - Static method in class nxopen.uf.UFDrf.ValidClineForm
-
- valueOf(int) - Static method in class nxopen.uf.UFDrf.ValidMaterial
-
- valueOf(String) - Static method in class nxopen.uf.UFDrf.ValidMaterial
-
- valueOf(int) - Static method in class nxopen.uf.UFDrf.VerticalTextJust
-
- valueOf(String) - Static method in class nxopen.uf.UFDrf.VerticalTextJust
-
- valueOf(int) - Static method in class nxopen.uf.UFDrf.ViewLabelTextToStubFormat
-
- valueOf(String) - Static method in class nxopen.uf.UFDrf.ViewLabelTextToStubFormat
-
- valueOf(int) - Static method in class nxopen.uf.UFDrf.WeldContourTypes
-
- valueOf(String) - Static method in class nxopen.uf.UFDrf.WeldContourTypes
-
- valueOf(int) - Static method in class nxopen.uf.UFDrf.WeldFinishTypes
-
- valueOf(String) - Static method in class nxopen.uf.UFDrf.WeldFinishTypes
-
- valueOf(int) - Static method in class nxopen.uf.UFDrf.WeldIdentLineType
-
- valueOf(String) - Static method in class nxopen.uf.UFDrf.WeldIdentLineType
-
- valueOf(int) - Static method in class nxopen.uf.UFDrf.WeldSizeCode
-
- valueOf(String) - Static method in class nxopen.uf.UFDrf.WeldSizeCode
-
- valueOf(int) - Static method in class nxopen.uf.UFDrf.WeldSymbolTypes
-
- valueOf(String) - Static method in class nxopen.uf.UFDrf.WeldSymbolTypes
-
- valueOf(int) - Static method in class nxopen.uf.UFDrf.WeldSymExtType
-
- valueOf(String) - Static method in class nxopen.uf.UFDrf.WeldSymExtType
-
- valueOf(int) - Static method in class nxopen.uf.UFDrpos.FeedUnit
-
- valueOf(String) - Static method in class nxopen.uf.UFDrpos.FeedUnit
-
- valueOf(int) - Static method in class nxopen.uf.UFDrpos.FeedUse
-
- valueOf(String) - Static method in class nxopen.uf.UFDrpos.FeedUse
-
- valueOf(int) - Static method in class nxopen.uf.UFDrpos.Type
-
- valueOf(String) - Static method in class nxopen.uf.UFDrpos.Type
-
- valueOf(int) - Static method in class nxopen.uf.UFDrpos.ZigZagDir
-
- valueOf(String) - Static method in class nxopen.uf.UFDrpos.ZigZagDir
-
- valueOf(int) - Static method in class nxopen.uf.UFFbmGeom.CritValueType
-
- valueOf(String) - Static method in class nxopen.uf.UFFbmGeom.CritValueType
-
- valueOf(int) - Static method in class nxopen.uf.UFGdt.Characteristic
-
- valueOf(String) - Static method in class nxopen.uf.UFGdt.Characteristic
-
- valueOf(int) - Static method in class nxopen.uf.UFGdt.DatumAssocType
-
- valueOf(String) - Static method in class nxopen.uf.UFGdt.DatumAssocType
-
- valueOf(int) - Static method in class nxopen.uf.UFGdt.DirectedDimensionType
-
- valueOf(String) - Static method in class nxopen.uf.UFGdt.DirectedDimensionType
-
- valueOf(int) - Static method in class nxopen.uf.UFGdt.EdgeSelectType
-
- valueOf(String) - Static method in class nxopen.uf.UFGdt.EdgeSelectType
-
- valueOf(int) - Static method in class nxopen.uf.UFGdt.FeatureType
-
- valueOf(String) - Static method in class nxopen.uf.UFGdt.FeatureType
-
- valueOf(int) - Static method in class nxopen.uf.UFGdt.GeometricDefinitionType
-
- valueOf(String) - Static method in class nxopen.uf.UFGdt.GeometricDefinitionType
-
- valueOf(int) - Static method in class nxopen.uf.UFGdt.IndexDisplayType
-
- valueOf(String) - Static method in class nxopen.uf.UFGdt.IndexDisplayType
-
- valueOf(int) - Static method in class nxopen.uf.UFGdt.LeaderType
-
- valueOf(String) - Static method in class nxopen.uf.UFGdt.LeaderType
-
- valueOf(int) - Static method in class nxopen.uf.UFGdt.LimitsAndFitsDisplayType
-
- valueOf(String) - Static method in class nxopen.uf.UFGdt.LimitsAndFitsDisplayType
-
- valueOf(int) - Static method in class nxopen.uf.UFGdt.MaterialModifier
-
- valueOf(String) - Static method in class nxopen.uf.UFGdt.MaterialModifier
-
- valueOf(int) - Static method in class nxopen.uf.UFGdt.ModifierTypes
-
- valueOf(String) - Static method in class nxopen.uf.UFGdt.ModifierTypes
-
- valueOf(int) - Static method in class nxopen.uf.UFGdt.ModlParameter
-
- valueOf(String) - Static method in class nxopen.uf.UFGdt.ModlParameter
-
- valueOf(int) - Static method in class nxopen.uf.UFGdt.PatternType
-
- valueOf(String) - Static method in class nxopen.uf.UFGdt.PatternType
-
- valueOf(int) - Static method in class nxopen.uf.UFGdt.Precedence
-
- valueOf(String) - Static method in class nxopen.uf.UFGdt.Precedence
-
- valueOf(int) - Static method in class nxopen.uf.UFGdt.ProfileType
-
- valueOf(String) - Static method in class nxopen.uf.UFGdt.ProfileType
-
- valueOf(int) - Static method in class nxopen.uf.UFGdt.RelationType
-
- valueOf(String) - Static method in class nxopen.uf.UFGdt.RelationType
-
- valueOf(int) - Static method in class nxopen.uf.UFGdt.SizeValueType
-
- valueOf(String) - Static method in class nxopen.uf.UFGdt.SizeValueType
-
- valueOf(int) - Static method in class nxopen.uf.UFGdt.Standard
-
- valueOf(String) - Static method in class nxopen.uf.UFGdt.Standard
-
- valueOf(int) - Static method in class nxopen.uf.UFGdt.StubDirection
-
- valueOf(String) - Static method in class nxopen.uf.UFGdt.StubDirection
-
- valueOf(int) - Static method in class nxopen.uf.UFGdt.TextLocation
-
- valueOf(String) - Static method in class nxopen.uf.UFGdt.TextLocation
-
- valueOf(int) - Static method in class nxopen.uf.UFGdt.ToleranceType
-
- valueOf(String) - Static method in class nxopen.uf.UFGdt.ToleranceType
-
- valueOf(int) - Static method in class nxopen.uf.UFGdt.TolFormat
-
- valueOf(String) - Static method in class nxopen.uf.UFGdt.TolFormat
-
- valueOf(int) - Static method in class nxopen.uf.UFGdt.ZoneShape
-
- valueOf(String) - Static method in class nxopen.uf.UFGdt.ZoneShape
-
- valueOf(int) - Static method in class nxopen.uf.UFGexp.Qualifier
-
- valueOf(String) - Static method in class nxopen.uf.UFGexp.Qualifier
-
- valueOf(int) - Static method in class nxopen.uf.UFKf.ClassType
-
- valueOf(String) - Static method in class nxopen.uf.UFKf.ClassType
-
- valueOf(int) - Static method in class nxopen.uf.UFKf.Type
-
- valueOf(String) - Static method in class nxopen.uf.UFKf.Type
-
- valueOf(int) - Static method in class nxopen.uf.UFLib.NcmctSetupReplaceMode
-
- valueOf(String) - Static method in class nxopen.uf.UFLib.NcmctSetupReplaceMode
-
- valueOf(int) - Static method in class nxopen.uf.UFMb.State
-
- valueOf(String) - Static method in class nxopen.uf.UFMb.State
-
- valueOf(int) - Static method in class nxopen.uf.UFMfm.AttrValueType
-
- valueOf(String) - Static method in class nxopen.uf.UFMfm.AttrValueType
-
- valueOf(int) - Static method in class nxopen.uf.UFMfm.MachinedStatus
-
- valueOf(String) - Static method in class nxopen.uf.UFMfm.MachinedStatus
-
- valueOf(int) - Static method in class nxopen.uf.UFMfm.SourceType
-
- valueOf(String) - Static method in class nxopen.uf.UFMfm.SourceType
-
- valueOf(int) - Static method in class nxopen.uf.UFModl.BeadAngleRelative
-
- valueOf(String) - Static method in class nxopen.uf.UFModl.BeadAngleRelative
-
- valueOf(int) - Static method in class nxopen.uf.UFModl.BeadAttach
-
- valueOf(String) - Static method in class nxopen.uf.UFModl.BeadAttach
-
- valueOf(int) - Static method in class nxopen.uf.UFModl.BeadEnds
-
- valueOf(String) - Static method in class nxopen.uf.UFModl.BeadEnds
-
- valueOf(int) - Static method in class nxopen.uf.UFModl.BeadHollow
-
- valueOf(String) - Static method in class nxopen.uf.UFModl.BeadHollow
-
- valueOf(int) - Static method in class nxopen.uf.UFModl.BeadPlaneNormal
-
- valueOf(String) - Static method in class nxopen.uf.UFModl.BeadPlaneNormal
-
- valueOf(int) - Static method in class nxopen.uf.UFModl.BeadShape
-
- valueOf(String) - Static method in class nxopen.uf.UFModl.BeadShape
-
- valueOf(int) - Static method in class nxopen.uf.UFModl.BeadWidthRelative
-
- valueOf(String) - Static method in class nxopen.uf.UFModl.BeadWidthRelative
-
- valueOf(int) - Static method in class nxopen.uf.UFModl.BendOperationE
-
- valueOf(String) - Static method in class nxopen.uf.UFModl.BendOperationE
-
- valueOf(int) - Static method in class nxopen.uf.UFModl.BlendRadiusTypes
-
- valueOf(String) - Static method in class nxopen.uf.UFModl.BlendRadiusTypes
-
- valueOf(int) - Static method in class nxopen.uf.UFModl.BooleanBody
-
- valueOf(String) - Static method in class nxopen.uf.UFModl.BooleanBody
-
- valueOf(int) - Static method in class nxopen.uf.UFModl.CompareAccuracy
-
- valueOf(String) - Static method in class nxopen.uf.UFModl.CompareAccuracy
-
- valueOf(int) - Static method in class nxopen.uf.UFModl.CompareChangeduniquefaceRule
-
- valueOf(String) - Static method in class nxopen.uf.UFModl.CompareChangeduniquefaceRule
-
- valueOf(int) - Static method in class nxopen.uf.UFModl.CompareEntityType
-
- valueOf(String) - Static method in class nxopen.uf.UFModl.CompareEntityType
-
- valueOf(int) - Static method in class nxopen.uf.UFModl.CompareIdenticalfaceRule
-
- valueOf(String) - Static method in class nxopen.uf.UFModl.CompareIdenticalfaceRule
-
- valueOf(int) - Static method in class nxopen.uf.UFModl.DensityUnits
-
- valueOf(String) - Static method in class nxopen.uf.UFModl.DensityUnits
-
- valueOf(int) - Static method in class nxopen.uf.UFModl.DfoConstraintType
-
- valueOf(String) - Static method in class nxopen.uf.UFModl.DfoConstraintType
-
- valueOf(int) - Static method in class nxopen.uf.UFModl.DfoScaleType
-
- valueOf(String) - Static method in class nxopen.uf.UFModl.DfoScaleType
-
- valueOf(int) - Static method in class nxopen.uf.UFModl.FaceExtension
-
- valueOf(String) - Static method in class nxopen.uf.UFModl.FaceExtension
-
- valueOf(int) - Static method in class nxopen.uf.UFModl.FeatureSigns
-
- valueOf(String) - Static method in class nxopen.uf.UFModl.FeatureSigns
-
- valueOf(int) - Static method in class nxopen.uf.UFModl.Gflange
-
- valueOf(String) - Static method in class nxopen.uf.UFModl.Gflange
-
- valueOf(int) - Static method in class nxopen.uf.UFModl.GflangeDistort
-
- valueOf(String) - Static method in class nxopen.uf.UFModl.GflangeDistort
-
- valueOf(int) - Static method in class nxopen.uf.UFModl.HoleType
-
- valueOf(String) - Static method in class nxopen.uf.UFModl.HoleType
-
- valueOf(int) - Static method in class nxopen.uf.UFModl.ImportBodyFeatureEditOption
-
- valueOf(String) - Static method in class nxopen.uf.UFModl.ImportBodyFeatureEditOption
-
- valueOf(int) - Static method in class nxopen.uf.UFModl.IntersectType
-
- valueOf(String) - Static method in class nxopen.uf.UFModl.IntersectType
-
- valueOf(int) - Static method in class nxopen.uf.UFModl.LawextDirref
-
- valueOf(String) - Static method in class nxopen.uf.UFModl.LawextDirref
-
- valueOf(int) - Static method in class nxopen.uf.UFModl.OffsetTransType
-
- valueOf(String) - Static method in class nxopen.uf.UFModl.OffsetTransType
-
- valueOf(int) - Static method in class nxopen.uf.UFModl.ParmMethod
-
- valueOf(String) - Static method in class nxopen.uf.UFModl.ParmMethod
-
- valueOf(int) - Static method in class nxopen.uf.UFModl.PocketpadType
-
- valueOf(String) - Static method in class nxopen.uf.UFModl.PocketpadType
-
- valueOf(int) - Static method in class nxopen.uf.UFModl.ProjType
-
- valueOf(String) - Static method in class nxopen.uf.UFModl.ProjType
-
- valueOf(int) - Static method in class nxopen.uf.UFModl.PunchType
-
- valueOf(String) - Static method in class nxopen.uf.UFModl.PunchType
-
- valueOf(int) - Static method in class nxopen.uf.UFModl.QuiltType
-
- valueOf(String) - Static method in class nxopen.uf.UFModl.QuiltType
-
- valueOf(int) - Static method in class nxopen.uf.UFModl.RefitFaceContinuity
-
- valueOf(String) - Static method in class nxopen.uf.UFModl.RefitFaceContinuity
-
- valueOf(int) - Static method in class nxopen.uf.UFModl.RefitFaceFitDirection
-
- valueOf(String) - Static method in class nxopen.uf.UFModl.RefitFaceFitDirection
-
- valueOf(int) - Static method in class nxopen.uf.UFModl.RsoSurfCtrlOption
-
- valueOf(String) - Static method in class nxopen.uf.UFModl.RsoSurfCtrlOption
-
- valueOf(int) - Static method in class nxopen.uf.UFModl.RsoSurfMethod
-
- valueOf(String) - Static method in class nxopen.uf.UFModl.RsoSurfMethod
-
- valueOf(int) - Static method in class nxopen.uf.UFModl.RsoTrimOption
-
- valueOf(String) - Static method in class nxopen.uf.UFModl.RsoTrimOption
-
- valueOf(int) - Static method in class nxopen.uf.UFModl.ScaleType
-
- valueOf(String) - Static method in class nxopen.uf.UFModl.ScaleType
-
- valueOf(int) - Static method in class nxopen.uf.UFModl.SecsrfCreMethod
-
- valueOf(String) - Static method in class nxopen.uf.UFModl.SecsrfCreMethod
-
- valueOf(int) - Static method in class nxopen.uf.UFModl.SecsrfParamMethod
-
- valueOf(String) - Static method in class nxopen.uf.UFModl.SecsrfParamMethod
-
- valueOf(int) - Static method in class nxopen.uf.UFModl.SflangeContinuity
-
- valueOf(String) - Static method in class nxopen.uf.UFModl.SflangeContinuity
-
- valueOf(int) - Static method in class nxopen.uf.UFModl.SflangeDir
-
- valueOf(String) - Static method in class nxopen.uf.UFModl.SflangeDir
-
- valueOf(int) - Static method in class nxopen.uf.UFModl.SflangeTrim
-
- valueOf(String) - Static method in class nxopen.uf.UFModl.SflangeTrim
-
- valueOf(int) - Static method in class nxopen.uf.UFModl.SflangeType
-
- valueOf(String) - Static method in class nxopen.uf.UFModl.SflangeType
-
- valueOf(int) - Static method in class nxopen.uf.UFModl.SlotType
-
- valueOf(String) - Static method in class nxopen.uf.UFModl.SlotType
-
- valueOf(int) - Static method in class nxopen.uf.UFModl.SmbendAngle
-
- valueOf(String) - Static method in class nxopen.uf.UFModl.SmbendAngle
-
- valueOf(int) - Static method in class nxopen.uf.UFModl.SmbendCurve
-
- valueOf(String) - Static method in class nxopen.uf.UFModl.SmbendCurve
-
- valueOf(int) - Static method in class nxopen.uf.UFModl.SmbendDirection
-
- valueOf(String) - Static method in class nxopen.uf.UFModl.SmbendDirection
-
- valueOf(int) - Static method in class nxopen.uf.UFModl.SmbendRadius
-
- valueOf(String) - Static method in class nxopen.uf.UFModl.SmbendRadius
-
- valueOf(int) - Static method in class nxopen.uf.UFModl.SmbendStatSide
-
- valueOf(String) - Static method in class nxopen.uf.UFModl.SmbendStatSide
-
- valueOf(int) - Static method in class nxopen.uf.UFModl.SmcutoutType
-
- valueOf(String) - Static method in class nxopen.uf.UFModl.SmcutoutType
-
- valueOf(int) - Static method in class nxopen.uf.UFModl.SmholeDirectionType
-
- valueOf(String) - Static method in class nxopen.uf.UFModl.SmholeDirectionType
-
- valueOf(int) - Static method in class nxopen.uf.UFModl.SmholeType
-
- valueOf(String) - Static method in class nxopen.uf.UFModl.SmholeType
-
- valueOf(int) - Static method in class nxopen.uf.UFModl.SmpunchTopType
-
- valueOf(String) - Static method in class nxopen.uf.UFModl.SmpunchTopType
-
- valueOf(int) - Static method in class nxopen.uf.UFModl.SmslotType
-
- valueOf(String) - Static method in class nxopen.uf.UFModl.SmslotType
-
- valueOf(int) - Static method in class nxopen.uf.UFModl.SnipsurfBoundaryType
-
- valueOf(String) - Static method in class nxopen.uf.UFModl.SnipsurfBoundaryType
-
- valueOf(int) - Static method in class nxopen.uf.UFModl.SnipsurfRefitMethod
-
- valueOf(String) - Static method in class nxopen.uf.UFModl.SnipsurfRefitMethod
-
- valueOf(int) - Static method in class nxopen.uf.UFModl.State
-
- valueOf(String) - Static method in class nxopen.uf.UFModl.State
-
- valueOf(int) - Static method in class nxopen.uf.UFModl.SweepTrimOpts
-
- valueOf(String) - Static method in class nxopen.uf.UFModl.SweepTrimOpts
-
- valueOf(int) - Static method in class nxopen.uf.UFModl.SweepTrimSigns
-
- valueOf(String) - Static method in class nxopen.uf.UFModl.SweepTrimSigns
-
- valueOf(int) - Static method in class nxopen.uf.UFModl.TransformType
-
- valueOf(String) - Static method in class nxopen.uf.UFModl.TransformType
-
- valueOf(int) - Static method in class nxopen.uf.UFModl.TrimBlendOptions
-
- valueOf(String) - Static method in class nxopen.uf.UFModl.TrimBlendOptions
-
- valueOf(int) - Static method in class nxopen.uf.UFModl.UdfReverseDir
-
- valueOf(String) - Static method in class nxopen.uf.UFModl.UdfReverseDir
-
- valueOf(int) - Static method in class nxopen.uf.UFModl.Units
-
- valueOf(String) - Static method in class nxopen.uf.UFModl.Units
-
- valueOf(int) - Static method in class nxopen.uf.UFModl.UpdateOption
-
- valueOf(String) - Static method in class nxopen.uf.UFModl.UpdateOption
-
- valueOf(int) - Static method in class nxopen.uf.UFModl.VectorType
-
- valueOf(String) - Static method in class nxopen.uf.UFModl.VectorType
-
- valueOf(int) - Static method in class nxopen.uf.UFMotion.AngularUnitsType
-
- valueOf(String) - Static method in class nxopen.uf.UFMotion.AngularUnitsType
-
- valueOf(int) - Static method in class nxopen.uf.UFMotion.AnlGeometryFormat
-
- valueOf(String) - Static method in class nxopen.uf.UFMotion.AnlGeometryFormat
-
- valueOf(int) - Static method in class nxopen.uf.UFMotion.ContactForce
-
- valueOf(String) - Static method in class nxopen.uf.UFMotion.ContactForce
-
- valueOf(int) - Static method in class nxopen.uf.UFMotion.ContactFriction
-
- valueOf(String) - Static method in class nxopen.uf.UFMotion.ContactFriction
-
- valueOf(int) - Static method in class nxopen.uf.UFMotion.ContactMethod
-
- valueOf(String) - Static method in class nxopen.uf.UFMotion.ContactMethod
-
- valueOf(int) - Static method in class nxopen.uf.UFMotion.DispAngle
-
- valueOf(String) - Static method in class nxopen.uf.UFMotion.DispAngle
-
- valueOf(int) - Static method in class nxopen.uf.UFMotion.FuncComponentType
-
- valueOf(String) - Static method in class nxopen.uf.UFMotion.FuncComponentType
-
- valueOf(int) - Static method in class nxopen.uf.UFMotion.FuncRefFrameType
-
- valueOf(String) - Static method in class nxopen.uf.UFMotion.FuncRefFrameType
-
- valueOf(int) - Static method in class nxopen.uf.UFMotion.FuncResultType
-
- valueOf(String) - Static method in class nxopen.uf.UFMotion.FuncResultType
-
- valueOf(int) - Static method in class nxopen.uf.UFMotion.JointCouplerType
-
- valueOf(String) - Static method in class nxopen.uf.UFMotion.JointCouplerType
-
- valueOf(int) - Static method in class nxopen.uf.UFMotion.JointMotionInputType
-
- valueOf(String) - Static method in class nxopen.uf.UFMotion.JointMotionInputType
-
- valueOf(int) - Static method in class nxopen.uf.UFMotion.JointType
-
- valueOf(String) - Static method in class nxopen.uf.UFMotion.JointType
-
- valueOf(int) - Static method in class nxopen.uf.UFMotion.MarkerType
-
- valueOf(String) - Static method in class nxopen.uf.UFMotion.MarkerType
-
- valueOf(int) - Static method in class nxopen.uf.UFMotion.MeasurementType
-
- valueOf(String) - Static method in class nxopen.uf.UFMotion.MeasurementType
-
- valueOf(int) - Static method in class nxopen.uf.UFMotion.MotionType
-
- valueOf(String) - Static method in class nxopen.uf.UFMotion.MotionType
-
- valueOf(int) - Static method in class nxopen.uf.UFMotion.PvExportType
-
- valueOf(String) - Static method in class nxopen.uf.UFMotion.PvExportType
-
- valueOf(int) - Static method in class nxopen.uf.UFMotion.ReferenceFrame
-
- valueOf(String) - Static method in class nxopen.uf.UFMotion.ReferenceFrame
-
- valueOf(int) - Static method in class nxopen.uf.UFMotion.Solver
-
- valueOf(String) - Static method in class nxopen.uf.UFMotion.Solver
-
- valueOf(int) - Static method in class nxopen.uf.UFMotion.SpringDamperType
-
- valueOf(String) - Static method in class nxopen.uf.UFMotion.SpringDamperType
-
- valueOf(int) - Static method in class nxopen.uf.UFMotion.VectorComponent
-
- valueOf(String) - Static method in class nxopen.uf.UFMotion.VectorComponent
-
- valueOf(int) - Static method in class nxopen.uf.UFMotion.VectorType
-
- valueOf(String) - Static method in class nxopen.uf.UFMotion.VectorType
-
- valueOf(int) - Static method in class nxopen.uf.UFNxsm.FeaturePropertyConstants
-
- valueOf(String) - Static method in class nxopen.uf.UFNxsm.FeaturePropertyConstants
-
- valueOf(int) - Static method in class nxopen.uf.UFNxsm.FlangeWidthOption
-
- valueOf(String) - Static method in class nxopen.uf.UFNxsm.FlangeWidthOption
-
- valueOf(int) - Static method in class nxopen.uf.UFOper.MachMode
-
- valueOf(String) - Static method in class nxopen.uf.UFOper.MachMode
-
- valueOf(int) - Static method in class nxopen.uf.UFParam.ClrplaneStatus
-
- valueOf(String) - Static method in class nxopen.uf.UFParam.ClrplaneStatus
-
- valueOf(int) - Static method in class nxopen.uf.UFParam.ClrplaneUsage
-
- valueOf(String) - Static method in class nxopen.uf.UFParam.ClrplaneUsage
-
- valueOf(int) - Static method in class nxopen.uf.UFParam.ClvRangeType
-
- valueOf(String) - Static method in class nxopen.uf.UFParam.ClvRangeType
-
- valueOf(int) - Static method in class nxopen.uf.UFParam.LwplaneStatus
-
- valueOf(String) - Static method in class nxopen.uf.UFParam.LwplaneStatus
-
- valueOf(int) - Static method in class nxopen.uf.UFParam.LwplaneUsage
-
- valueOf(String) - Static method in class nxopen.uf.UFParam.LwplaneUsage
-
- valueOf(int) - Static method in class nxopen.uf.UFParam.Regen
-
- valueOf(String) - Static method in class nxopen.uf.UFParam.Regen
-
- valueOf(int) - Static method in class nxopen.uf.UFParam.Status
-
- valueOf(String) - Static method in class nxopen.uf.UFParam.Status
-
- valueOf(int) - Static method in class nxopen.uf.UFParam.TtmoprSubopType
-
- valueOf(String) - Static method in class nxopen.uf.UFParam.TtmoprSubopType
-
- valueOf(int) - Static method in class nxopen.uf.UFParam.TurnWorkpieceDirection
-
- valueOf(String) - Static method in class nxopen.uf.UFParam.TurnWorkpieceDirection
-
- valueOf(int) - Static method in class nxopen.uf.UFParam.TurnWorkpieceType
-
- valueOf(String) - Static method in class nxopen.uf.UFParam.TurnWorkpieceType
-
- valueOf(int) - Static method in class nxopen.uf.UFParam.Type
-
- valueOf(String) - Static method in class nxopen.uf.UFParam.Type
-
- valueOf(int) - Static method in class nxopen.uf.UFPart.ExportExpMode
-
- valueOf(String) - Static method in class nxopen.uf.UFPart.ExportExpMode
-
- valueOf(int) - Static method in class nxopen.uf.UFPart.ExportParamsMode
-
- valueOf(String) - Static method in class nxopen.uf.UFPart.ExportParamsMode
-
- valueOf(int) - Static method in class nxopen.uf.UFPath.ArcMode
-
- valueOf(String) - Static method in class nxopen.uf.UFPath.ArcMode
-
- valueOf(int) - Static method in class nxopen.uf.UFPath.Axis
-
- valueOf(String) - Static method in class nxopen.uf.UFPath.Axis
-
- valueOf(int) - Static method in class nxopen.uf.UFPath.ClampStatus
-
- valueOf(String) - Static method in class nxopen.uf.UFPath.ClampStatus
-
- valueOf(int) - Static method in class nxopen.uf.UFPath.CoolantType
-
- valueOf(String) - Static method in class nxopen.uf.UFPath.CoolantType
-
- valueOf(int) - Static method in class nxopen.uf.UFPath.CutcomMode
-
- valueOf(String) - Static method in class nxopen.uf.UFPath.CutcomMode
-
- valueOf(int) - Static method in class nxopen.uf.UFPath.CutcomOff
-
- valueOf(String) - Static method in class nxopen.uf.UFPath.CutcomOff
-
- valueOf(int) - Static method in class nxopen.uf.UFPath.CutcomOn
-
- valueOf(String) - Static method in class nxopen.uf.UFPath.CutcomOn
-
- valueOf(int) - Static method in class nxopen.uf.UFPath.Direction
-
- valueOf(String) - Static method in class nxopen.uf.UFPath.Direction
-
- valueOf(int) - Static method in class nxopen.uf.UFPath.DwellUnit
-
- valueOf(String) - Static method in class nxopen.uf.UFPath.DwellUnit
-
- valueOf(int) - Static method in class nxopen.uf.UFPath.FeedrateMode
-
- valueOf(String) - Static method in class nxopen.uf.UFPath.FeedrateMode
-
- valueOf(int) - Static method in class nxopen.uf.UFPath.FeedUnit
-
- valueOf(String) - Static method in class nxopen.uf.UFPath.FeedUnit
-
- valueOf(int) - Static method in class nxopen.uf.UFPath.FlushType
-
- valueOf(String) - Static method in class nxopen.uf.UFPath.FlushType
-
- valueOf(int) - Static method in class nxopen.uf.UFPath.Guide
-
- valueOf(String) - Static method in class nxopen.uf.UFPath.Guide
-
- valueOf(int) - Static method in class nxopen.uf.UFPath.HeadType
-
- valueOf(String) - Static method in class nxopen.uf.UFPath.HeadType
-
- valueOf(int) - Static method in class nxopen.uf.UFPath.MachineMode
-
- valueOf(String) - Static method in class nxopen.uf.UFPath.MachineMode
-
- valueOf(int) - Static method in class nxopen.uf.UFPath.MotionType
-
- valueOf(String) - Static method in class nxopen.uf.UFPath.MotionType
-
- valueOf(int) - Static method in class nxopen.uf.UFPath.OpSkip
-
- valueOf(String) - Static method in class nxopen.uf.UFPath.OpSkip
-
- valueOf(int) - Static method in class nxopen.uf.UFPath.OutputMode
-
- valueOf(String) - Static method in class nxopen.uf.UFPath.OutputMode
-
- valueOf(int) - Static method in class nxopen.uf.UFPath.ParallelMode
-
- valueOf(String) - Static method in class nxopen.uf.UFPath.ParallelMode
-
- valueOf(int) - Static method in class nxopen.uf.UFPath.PlaneType
-
- valueOf(String) - Static method in class nxopen.uf.UFPath.PlaneType
-
- valueOf(int) - Static method in class nxopen.uf.UFPath.Pressure
-
- valueOf(String) - Static method in class nxopen.uf.UFPath.Pressure
-
- valueOf(int) - Static method in class nxopen.uf.UFPath.RotationObject
-
- valueOf(String) - Static method in class nxopen.uf.UFPath.RotationObject
-
- valueOf(int) - Static method in class nxopen.uf.UFPath.RotationType
-
- valueOf(String) - Static method in class nxopen.uf.UFPath.RotationType
-
- valueOf(int) - Static method in class nxopen.uf.UFPath.Seqno
-
- valueOf(String) - Static method in class nxopen.uf.UFPath.Seqno
-
- valueOf(int) - Static method in class nxopen.uf.UFPath.Shape
-
- valueOf(String) - Static method in class nxopen.uf.UFPath.Shape
-
- valueOf(int) - Static method in class nxopen.uf.UFPath.Side
-
- valueOf(String) - Static method in class nxopen.uf.UFPath.Side
-
- valueOf(int) - Static method in class nxopen.uf.UFPath.SpindleMode
-
- valueOf(String) - Static method in class nxopen.uf.UFPath.SpindleMode
-
- valueOf(int) - Static method in class nxopen.uf.UFPath.TankType
-
- valueOf(String) - Static method in class nxopen.uf.UFPath.TankType
-
- valueOf(int) - Static method in class nxopen.uf.UFPatt.Switch
-
- valueOf(String) - Static method in class nxopen.uf.UFPatt.Switch
-
- valueOf(int) - Static method in class nxopen.uf.UFPd.AttributeType
-
- valueOf(String) - Static method in class nxopen.uf.UFPd.AttributeType
-
- valueOf(int) - Static method in class nxopen.uf.UFPd.AttributeValueType
-
- valueOf(String) - Static method in class nxopen.uf.UFPd.AttributeValueType
-
- valueOf(int) - Static method in class nxopen.uf.UFPd.BusModfrType
-
- valueOf(String) - Static method in class nxopen.uf.UFPd.BusModfrType
-
- valueOf(int) - Static method in class nxopen.uf.UFPd.ProductDefinitionInstanceType
-
- valueOf(String) - Static method in class nxopen.uf.UFPd.ProductDefinitionInstanceType
-
- valueOf(int) - Static method in class nxopen.uf.UFPd.ProductDefinitionLeaderAssocPntType
-
- valueOf(String) - Static method in class nxopen.uf.UFPd.ProductDefinitionLeaderAssocPntType
-
- valueOf(int) - Static method in class nxopen.uf.UFPlist.ColumnType
-
- valueOf(String) - Static method in class nxopen.uf.UFPlist.ColumnType
-
- valueOf(int) - Static method in class nxopen.uf.UFPlist.GrowDirection
-
- valueOf(String) - Static method in class nxopen.uf.UFPlist.GrowDirection
-
- valueOf(int) - Static method in class nxopen.uf.UFPlist.LdrMethod
-
- valueOf(String) - Static method in class nxopen.uf.UFPlist.LdrMethod
-
- valueOf(int) - Static method in class nxopen.uf.UFPlist.SymbolType
-
- valueOf(String) - Static method in class nxopen.uf.UFPlist.SymbolType
-
- valueOf(int) - Static method in class nxopen.uf.UFPlot.CmpColorWidth
-
- valueOf(String) - Static method in class nxopen.uf.UFPlot.CmpColorWidth
-
- valueOf(int) - Static method in class nxopen.uf.UFPlot.Colors
-
- valueOf(String) - Static method in class nxopen.uf.UFPlot.Colors
-
- valueOf(int) - Static method in class nxopen.uf.UFPlot.CreateCmpResultPlot
-
- valueOf(String) - Static method in class nxopen.uf.UFPlot.CreateCmpResultPlot
-
- valueOf(int) - Static method in class nxopen.uf.UFPlot.DiffCmpStatus
-
- valueOf(String) - Static method in class nxopen.uf.UFPlot.DiffCmpStatus
-
- valueOf(int) - Static method in class nxopen.uf.UFPlot.Format
-
- valueOf(String) - Static method in class nxopen.uf.UFPlot.Format
-
- valueOf(int) - Static method in class nxopen.uf.UFPlot.Rotation
-
- valueOf(String) - Static method in class nxopen.uf.UFPlot.Rotation
-
- valueOf(int) - Static method in class nxopen.uf.UFPlot.Units
-
- valueOf(String) - Static method in class nxopen.uf.UFPlot.Units
-
- valueOf(int) - Static method in class nxopen.uf.UFPlot.Widths
-
- valueOf(String) - Static method in class nxopen.uf.UFPlot.Widths
-
- valueOf(int) - Static method in class nxopen.uf.UFProcessAid.Types
-
- valueOf(String) - Static method in class nxopen.uf.UFProcessAid.Types
-
- valueOf(int) - Static method in class nxopen.uf.UFScop.TxIntpDataType
-
- valueOf(String) - Static method in class nxopen.uf.UFScop.TxIntpDataType
-
- valueOf(int) - Static method in class nxopen.uf.UFScop.TxIntpMethod
-
- valueOf(String) - Static method in class nxopen.uf.UFScop.TxIntpMethod
-
- valueOf(int) - Static method in class nxopen.uf.UFSetup.OutputUnits
-
- valueOf(String) - Static method in class nxopen.uf.UFSetup.OutputUnits
-
- valueOf(int) - Static method in class nxopen.uf.UFSf.AssemblyType
-
- valueOf(String) - Static method in class nxopen.uf.UFSf.AssemblyType
-
- valueOf(int) - Static method in class nxopen.uf.UFSf.DursolDesignLifeCriterion
-
- valueOf(String) - Static method in class nxopen.uf.UFSf.DursolDesignLifeCriterion
-
- valueOf(int) - Static method in class nxopen.uf.UFSf.DursolFatigueLifeCriterion
-
- valueOf(String) - Static method in class nxopen.uf.UFSf.DursolFatigueLifeCriterion
-
- valueOf(int) - Static method in class nxopen.uf.UFSf.DursolStressCriterion
-
- valueOf(String) - Static method in class nxopen.uf.UFSf.DursolStressCriterion
-
- valueOf(int) - Static method in class nxopen.uf.UFSf.DursolStressType
-
- valueOf(String) - Static method in class nxopen.uf.UFSf.DursolStressType
-
- valueOf(int) - Static method in class nxopen.uf.UFSf.EdgeDensityType
-
- valueOf(String) - Static method in class nxopen.uf.UFSf.EdgeDensityType
-
- valueOf(int) - Static method in class nxopen.uf.UFSf.ElementType
-
- valueOf(String) - Static method in class nxopen.uf.UFSf.ElementType
-
- valueOf(int) - Static method in class nxopen.uf.UFSf.ElmAdaptivityType
-
- valueOf(String) - Static method in class nxopen.uf.UFSf.ElmAdaptivityType
-
- valueOf(int) - Static method in class nxopen.uf.UFSf.ElmDimensionType
-
- valueOf(String) - Static method in class nxopen.uf.UFSf.ElmDimensionType
-
- valueOf(int) - Static method in class nxopen.uf.UFSf.FaceSubdivStatus
-
- valueOf(String) - Static method in class nxopen.uf.UFSf.FaceSubdivStatus
-
- valueOf(int) - Static method in class nxopen.uf.UFSf.FemValueType
-
- valueOf(String) - Static method in class nxopen.uf.UFSf.FemValueType
-
- valueOf(int) - Static method in class nxopen.uf.UFSf.IdealizeParmExp
-
- valueOf(String) - Static method in class nxopen.uf.UFSf.IdealizeParmExp
-
- valueOf(int) - Static method in class nxopen.uf.UFSf.IdealizeParmFace
-
- valueOf(String) - Static method in class nxopen.uf.UFSf.IdealizeParmFace
-
- valueOf(int) - Static method in class nxopen.uf.UFSf.LangAnalysisType
-
- valueOf(String) - Static method in class nxopen.uf.UFSf.LangAnalysisType
-
- valueOf(int) - Static method in class nxopen.uf.UFSf.LangLinearity
-
- valueOf(String) - Static method in class nxopen.uf.UFSf.LangLinearity
-
- valueOf(int) - Static method in class nxopen.uf.UFSf.LangProblemAbstract
-
- valueOf(String) - Static method in class nxopen.uf.UFSf.LangProblemAbstract
-
- valueOf(int) - Static method in class nxopen.uf.UFSf.LangTimeDepend
-
- valueOf(String) - Static method in class nxopen.uf.UFSf.LangTimeDepend
-
- valueOf(int) - Static method in class nxopen.uf.UFSf.LibraryMaterial
-
- valueOf(String) - Static method in class nxopen.uf.UFSf.LibraryMaterial
-
- valueOf(int) - Static method in class nxopen.uf.UFSf.LvFunctionMode
-
- valueOf(String) - Static method in class nxopen.uf.UFSf.LvFunctionMode
-
- valueOf(int) - Static method in class nxopen.uf.UFSf.McResultFormat
-
- valueOf(String) - Static method in class nxopen.uf.UFSf.McResultFormat
-
- valueOf(int) - Static method in class nxopen.uf.UFSf.MeshDimension
-
- valueOf(String) - Static method in class nxopen.uf.UFSf.MeshDimension
-
- valueOf(int) - Static method in class nxopen.uf.UFSf.MeshErrorType
-
- valueOf(String) - Static method in class nxopen.uf.UFSf.MeshErrorType
-
- valueOf(int) - Static method in class nxopen.uf.UFSf.MeshGeometryTypes
-
- valueOf(String) - Static method in class nxopen.uf.UFSf.MeshGeometryTypes
-
- valueOf(int) - Static method in class nxopen.uf.UFSf.MeshGeomMeshdir
-
- valueOf(String) - Static method in class nxopen.uf.UFSf.MeshGeomMeshdir
-
- valueOf(int) - Static method in class nxopen.uf.UFSf.MeshGeomUsage
-
- valueOf(String) - Static method in class nxopen.uf.UFSf.MeshGeomUsage
-
- valueOf(int) - Static method in class nxopen.uf.UFSf.MidNodeType
-
- valueOf(String) - Static method in class nxopen.uf.UFSf.MidNodeType
-
- valueOf(int) - Static method in class nxopen.uf.UFSf.MultiPropType
-
- valueOf(String) - Static method in class nxopen.uf.UFSf.MultiPropType
-
- valueOf(int) - Static method in class nxopen.uf.UFSf.NeutralMaterialTypes
-
- valueOf(String) - Static method in class nxopen.uf.UFSf.NeutralMaterialTypes
-
- valueOf(int) - Static method in class nxopen.uf.UFSf.NodeBtype
-
- valueOf(String) - Static method in class nxopen.uf.UFSf.NodeBtype
-
- valueOf(int) - Static method in class nxopen.uf.UFSf.NodeSwitch
-
- valueOf(String) - Static method in class nxopen.uf.UFSf.NodeSwitch
-
- valueOf(int) - Static method in class nxopen.uf.UFSf.ScenarioInfo
-
- valueOf(String) - Static method in class nxopen.uf.UFSf.ScenarioInfo
-
- valueOf(int) - Static method in class nxopen.uf.UFSf.Sf0dDensityType
-
- valueOf(String) - Static method in class nxopen.uf.UFSf.Sf0dDensityType
-
- valueOf(int) - Static method in class nxopen.uf.UFSf.Sf0dElementType
-
- valueOf(String) - Static method in class nxopen.uf.UFSf.Sf0dElementType
-
- valueOf(int) - Static method in class nxopen.uf.UFSf.Sf1dDensityType
-
- valueOf(String) - Static method in class nxopen.uf.UFSf.Sf1dDensityType
-
- valueOf(int) - Static method in class nxopen.uf.UFSf.Sf1dElementType
-
- valueOf(String) - Static method in class nxopen.uf.UFSf.Sf1dElementType
-
- valueOf(int) - Static method in class nxopen.uf.UFSf.Ugs2dMesherElemType
-
- valueOf(String) - Static method in class nxopen.uf.UFSf.Ugs2dMesherElemType
-
- valueOf(int) - Static method in class nxopen.uf.UFSf.UgsAbstractionFilletTypeOption
-
- valueOf(String) - Static method in class nxopen.uf.UFSf.UgsAbstractionFilletTypeOption
-
- valueOf(int) - Static method in class nxopen.uf.UFSf.UgsMesherMidnodeOption
-
- valueOf(String) - Static method in class nxopen.uf.UFSf.UgsMesherMidnodeOption
-
- valueOf(int) - Static method in class nxopen.uf.UFSf.UgsTetMeshFilletTypeOption
-
- valueOf(String) - Static method in class nxopen.uf.UFSf.UgsTetMeshFilletTypeOption
-
- valueOf(int) - Static method in class nxopen.uf.UFSfLegend.TextJustification
-
- valueOf(String) - Static method in class nxopen.uf.UFSfLegend.TextJustification
-
- valueOf(int) - Static method in class nxopen.uf.UFSfPost.LayoutType
-
- valueOf(String) - Static method in class nxopen.uf.UFSfPost.LayoutType
-
- valueOf(int) - Static method in class nxopen.uf.UFSfPost.Target
-
- valueOf(String) - Static method in class nxopen.uf.UFSfPost.Target
-
- valueOf(int) - Static method in class nxopen.uf.UFSim.AxisRotDirType
-
- valueOf(String) - Static method in class nxopen.uf.UFSim.AxisRotDirType
-
- valueOf(int) - Static method in class nxopen.uf.UFSim.CuttingMode
-
- valueOf(String) - Static method in class nxopen.uf.UFSim.CuttingMode
-
- valueOf(int) - Static method in class nxopen.uf.UFSim.KimDegOfTypes
-
- valueOf(String) - Static method in class nxopen.uf.UFSim.KimDegOfTypes
-
- valueOf(int) - Static method in class nxopen.uf.UFSim.SvKimDegofDirection
-
- valueOf(String) - Static method in class nxopen.uf.UFSim.SvKimDegofDirection
-
- valueOf(int) - Static method in class nxopen.uf.UFSim.ToolClass
-
- valueOf(String) - Static method in class nxopen.uf.UFSim.ToolClass
-
- valueOf(int) - Static method in class nxopen.uf.UFSim.UnitType
-
- valueOf(String) - Static method in class nxopen.uf.UFSim.UnitType
-
- valueOf(int) - Static method in class nxopen.uf.UFSket.AssocType
-
- valueOf(String) - Static method in class nxopen.uf.UFSket.AssocType
-
- valueOf(int) - Static method in class nxopen.uf.UFSket.ConClass
-
- valueOf(String) - Static method in class nxopen.uf.UFSket.ConClass
-
- valueOf(int) - Static method in class nxopen.uf.UFSket.ConType
-
- valueOf(String) - Static method in class nxopen.uf.UFSket.ConType
-
- valueOf(int) - Static method in class nxopen.uf.UFSket.GeomVertex
-
- valueOf(String) - Static method in class nxopen.uf.UFSket.GeomVertex
-
- valueOf(int) - Static method in class nxopen.uf.UFSket.HelpType
-
- valueOf(String) - Static method in class nxopen.uf.UFSket.HelpType
-
- valueOf(int) - Static method in class nxopen.uf.UFSket.ReferenceStatus
-
- valueOf(String) - Static method in class nxopen.uf.UFSket.ReferenceStatus
-
- valueOf(int) - Static method in class nxopen.uf.UFSket.Status
-
- valueOf(String) - Static method in class nxopen.uf.UFSket.Status
-
- valueOf(int) - Static method in class nxopen.uf.UFSmd.AngleTypeE
-
- valueOf(String) - Static method in class nxopen.uf.UFSmd.AngleTypeE
-
- valueOf(int) - Static method in class nxopen.uf.UFSmd.BafOptionsE
-
- valueOf(String) - Static method in class nxopen.uf.UFSmd.BafOptionsE
-
- valueOf(int) - Static method in class nxopen.uf.UFSmd.BatAngleTypeE
-
- valueOf(String) - Static method in class nxopen.uf.UFSmd.BatAngleTypeE
-
- valueOf(int) - Static method in class nxopen.uf.UFSmd.BatRadiusTypeE
-
- valueOf(String) - Static method in class nxopen.uf.UFSmd.BatRadiusTypeE
-
- valueOf(int) - Static method in class nxopen.uf.UFSmd.FormingMethodE
-
- valueOf(String) - Static method in class nxopen.uf.UFSmd.FormingMethodE
-
- valueOf(int) - Static method in class nxopen.uf.UFSmd.PipSequentialE
-
- valueOf(String) - Static method in class nxopen.uf.UFSmd.PipSequentialE
-
- valueOf(int) - Static method in class nxopen.uf.UFSmd.PipTypeEnumE
-
- valueOf(String) - Static method in class nxopen.uf.UFSmd.PipTypeEnumE
-
- valueOf(int) - Static method in class nxopen.uf.UFSmd.RadiusTypeE
-
- valueOf(String) - Static method in class nxopen.uf.UFSmd.RadiusTypeE
-
- valueOf(int) - Static method in class nxopen.uf.UFSo.DirrOnCurveOption
-
- valueOf(String) - Static method in class nxopen.uf.UFSo.DirrOnCurveOption
-
- valueOf(int) - Static method in class nxopen.uf.UFSo.PointAlongCurveOption
-
- valueOf(String) - Static method in class nxopen.uf.UFSo.PointAlongCurveOption
-
- valueOf(int) - Static method in class nxopen.uf.UFSo.ScalarDimOption
-
- valueOf(String) - Static method in class nxopen.uf.UFSo.ScalarDimOption
-
- valueOf(int) - Static method in class nxopen.uf.UFSo.UpdateOption
-
- valueOf(String) - Static method in class nxopen.uf.UFSo.UpdateOption
-
- valueOf(int) - Static method in class nxopen.uf.UFSo.VisibilityOption
-
- valueOf(String) - Static method in class nxopen.uf.UFSo.VisibilityOption
-
- valueOf(int) - Static method in class nxopen.uf.UFStudio.StybldCont
-
- valueOf(String) - Static method in class nxopen.uf.UFStudio.StybldCont
-
- valueOf(int) - Static method in class nxopen.uf.UFStudio.StybldDirect
-
- valueOf(String) - Static method in class nxopen.uf.UFStudio.StybldDirect
-
- valueOf(int) - Static method in class nxopen.uf.UFStudio.StybldMethod
-
- valueOf(String) - Static method in class nxopen.uf.UFStudio.StybldMethod
-
- valueOf(int) - Static method in class nxopen.uf.UFStudio.StybldMinrad
-
- valueOf(String) - Static method in class nxopen.uf.UFStudio.StybldMinrad
-
- valueOf(int) - Static method in class nxopen.uf.UFStudio.StybldStiff
-
- valueOf(String) - Static method in class nxopen.uf.UFStudio.StybldStiff
-
- valueOf(int) - Static method in class nxopen.uf.UFStudio.StybldTrans
-
- valueOf(String) - Static method in class nxopen.uf.UFStudio.StybldTrans
-
- valueOf(int) - Static method in class nxopen.uf.UFStudio.StybldTrim
-
- valueOf(String) - Static method in class nxopen.uf.UFStudio.StybldTrim
-
- valueOf(int) - Static method in class nxopen.uf.UFStudio.StybldVDegree
-
- valueOf(String) - Static method in class nxopen.uf.UFStudio.StybldVDegree
-
- valueOf(int) - Static method in class nxopen.uf.UFSubdiv.Type
-
- valueOf(String) - Static method in class nxopen.uf.UFSubdiv.Type
-
- valueOf(int) - Static method in class nxopen.uf.UFSurfReg.Type
-
- valueOf(String) - Static method in class nxopen.uf.UFSurfReg.Type
-
- valueOf(int) - Static method in class nxopen.uf.UFTabnot.AttachPoint
-
- valueOf(String) - Static method in class nxopen.uf.UFTabnot.AttachPoint
-
- valueOf(int) - Static method in class nxopen.uf.UFTabnot.DisplayContinuationNote
-
- valueOf(String) - Static method in class nxopen.uf.UFTabnot.DisplayContinuationNote
-
- valueOf(int) - Static method in class nxopen.uf.UFTabnot.FitMethod
-
- valueOf(String) - Static method in class nxopen.uf.UFTabnot.FitMethod
-
- valueOf(int) - Static method in class nxopen.uf.UFTabnot.Format
-
- valueOf(String) - Static method in class nxopen.uf.UFTabnot.Format
-
- valueOf(int) - Static method in class nxopen.uf.UFTabnot.HeaderLocation
-
- valueOf(String) - Static method in class nxopen.uf.UFTabnot.HeaderLocation
-
- valueOf(int) - Static method in class nxopen.uf.UFTabnot.Just
-
- valueOf(String) - Static method in class nxopen.uf.UFTabnot.Just
-
- valueOf(int) - Static method in class nxopen.uf.UFTabnot.OverflowDirection
-
- valueOf(String) - Static method in class nxopen.uf.UFTabnot.OverflowDirection
-
- valueOf(int) - Static method in class nxopen.uf.UFTabnot.SortDirection
-
- valueOf(String) - Static method in class nxopen.uf.UFTabnot.SortDirection
-
- valueOf(int) - Static method in class nxopen.uf.UFTabnot.ZeroDisplay
-
- valueOf(String) - Static method in class nxopen.uf.UFTabnot.ZeroDisplay
-
- valueOf(int) - Static method in class nxopen.uf.UFText.ModeS
-
- valueOf(String) - Static method in class nxopen.uf.UFText.ModeS
-
- valueOf(int) - Static method in class nxopen.uf.UFTurn.CutRegionsLocation
-
- valueOf(String) - Static method in class nxopen.uf.UFTurn.CutRegionsLocation
-
- valueOf(int) - Static method in class nxopen.uf.UFUde.ParamToggle
-
- valueOf(String) - Static method in class nxopen.uf.UFUde.ParamToggle
-
- valueOf(int) - Static method in class nxopen.uf.UFUde.ParamType
-
- valueOf(String) - Static method in class nxopen.uf.UFUde.ParamType
-
- valueOf(int) - Static method in class nxopen.uf.UFUde.SetType
-
- valueOf(String) - Static method in class nxopen.uf.UFUde.SetType
-
- valueOf(int) - Static method in class nxopen.uf.UFUdop.Purpose
-
- valueOf(String) - Static method in class nxopen.uf.UFUdop.Purpose
-
- valueOf(int) - Static method in class nxopen.uf.UFUgfont.Type
-
- valueOf(String) - Static method in class nxopen.uf.UFUgfont.Type
-
- valueOf(int) - Static method in class nxopen.uf.UFUgmgr.AltIdStatus
-
- valueOf(String) - Static method in class nxopen.uf.UFUgmgr.AltIdStatus
-
- valueOf(int) - Static method in class nxopen.uf.UFUgmgr.ObjectType
-
- valueOf(String) - Static method in class nxopen.uf.UFUgmgr.ObjectType
-
- valueOf(int) - Static method in class nxopen.uf.UFUgmgr.PartnoStatus
-
- valueOf(String) - Static method in class nxopen.uf.UFUgmgr.PartnoStatus
-
- valueOf(int) - Static method in class nxopen.uf.UFUi.DialogDirId
-
- valueOf(String) - Static method in class nxopen.uf.UFUi.DialogDirId
-
- valueOf(int) - Static method in class nxopen.uf.UFUi.DialogFilterId
-
- valueOf(String) - Static method in class nxopen.uf.UFUi.DialogFilterId
-
- valueOf(int) - Static method in class nxopen.uf.UFUi.FunType
-
- valueOf(String) - Static method in class nxopen.uf.UFUi.FunType
-
- valueOf(int) - Static method in class nxopen.uf.UFUi.MenuType
-
- valueOf(String) - Static method in class nxopen.uf.UFUi.MenuType
-
- valueOf(int) - Static method in class nxopen.uf.UFUi.MessageDialogType
-
- valueOf(String) - Static method in class nxopen.uf.UFUi.MessageDialogType
-
- valueOf(int) - Static method in class nxopen.uf.UFUi.PointBaseMethod
-
- valueOf(String) - Static method in class nxopen.uf.UFUi.PointBaseMethod
-
- valueOf(int) - Static method in class nxopen.uf.UFUiOnt.TreeMode
-
- valueOf(String) - Static method in class nxopen.uf.UFUiOnt.TreeMode
-
- valueOf(int) - Static method in class nxopen.uf.UFUndo.UserVisibility
-
- valueOf(String) - Static method in class nxopen.uf.UFUndo.UserVisibility
-
- valueOf(int) - Static method in class nxopen.uf.UFView.CycleObjects
-
- valueOf(String) - Static method in class nxopen.uf.UFView.CycleObjects
-
- valueOf(int) - Static method in class nxopen.uf.UFView.HiddenEdgeStyle
-
- valueOf(String) - Static method in class nxopen.uf.UFView.HiddenEdgeStyle
-
- valueOf(int) - Static method in class nxopen.uf.UFView.LightBeamFallOff
-
- valueOf(String) - Static method in class nxopen.uf.UFView.LightBeamFallOff
-
- valueOf(int) - Static method in class nxopen.uf.UFView.LightDetail
-
- valueOf(String) - Static method in class nxopen.uf.UFView.LightDetail
-
- valueOf(int) - Static method in class nxopen.uf.UFView.LightEdge
-
- valueOf(String) - Static method in class nxopen.uf.UFView.LightEdge
-
- valueOf(int) - Static method in class nxopen.uf.UFView.LightFallOff
-
- valueOf(String) - Static method in class nxopen.uf.UFView.LightFallOff
-
- valueOf(int) - Static method in class nxopen.uf.UFView.LightIntensityFactor
-
- valueOf(String) - Static method in class nxopen.uf.UFView.LightIntensityFactor
-
- valueOf(int) - Static method in class nxopen.uf.UFView.LightMode
-
- valueOf(String) - Static method in class nxopen.uf.UFView.LightMode
-
- valueOf(int) - Static method in class nxopen.uf.UFView.LightType
-
- valueOf(String) - Static method in class nxopen.uf.UFView.LightType
-
- valueOf(int) - Static method in class nxopen.uf.UFView.RenderingStyle
-
- valueOf(String) - Static method in class nxopen.uf.UFView.RenderingStyle
-
- valueOf(int) - Static method in class nxopen.uf.UFView.ShadedEdgeStyle
-
- valueOf(String) - Static method in class nxopen.uf.UFView.ShadedEdgeStyle
-
- valueOf(int) - Static method in class nxopen.uf.UFView.SmoothEdges
-
- valueOf(String) - Static method in class nxopen.uf.UFView.SmoothEdges
-
- valueOf(int) - Static method in class nxopen.uf.UFView.StandardOrientation
-
- valueOf(String) - Static method in class nxopen.uf.UFView.StandardOrientation
-
- valueOf(int) - Static method in class nxopen.uf.UFView.Subtype
-
- valueOf(String) - Static method in class nxopen.uf.UFView.Subtype
-
- valueOf(int) - Static method in class nxopen.uf.UFView.Type
-
- valueOf(String) - Static method in class nxopen.uf.UFView.Type
-
- valueOf(int) - Static method in class nxopen.uf.UFView.VdeType
-
- valueOf(String) - Static method in class nxopen.uf.UFView.VdeType
-
- valueOf(int) - Static method in class nxopen.uf.UFWave.DelayStatus
-
- valueOf(String) - Static method in class nxopen.uf.UFWave.DelayStatus
-
- valueOf(int) - Static method in class nxopen.uf.UFWeight.ExceptionReason
-
- valueOf(String) - Static method in class nxopen.uf.UFWeight.ExceptionReason
-
- valueOf(int) - Static method in class nxopen.uf.UFWeight.StateType
-
- valueOf(String) - Static method in class nxopen.uf.UFWeight.StateType
-
- valueOf(int) - Static method in class nxopen.uf.UFWeight.UnitsType
-
- valueOf(String) - Static method in class nxopen.uf.UFWeight.UnitsType
-
- valueOf(int) - Static method in class nxopen.uf.UFWeld.Types
-
- valueOf(String) - Static method in class nxopen.uf.UFWeld.Types
-
- valueOf(int) - Static method in class nxopen.UI.Status
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.UI.Status
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.uistyler.Attachment.AttachType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.uistyler.Attachment.AttachType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.uistyler.Dialog.ItemType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.uistyler.Dialog.ItemType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.uistyler.DialogIndex
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.uistyler.DialogIndex
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.uistyler.DialogItem.DialogItemIndex
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.uistyler.DialogItem.DialogItemIndex
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.uistyler.DialogResponse
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.uistyler.DialogResponse
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.uistyler.DialogState
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.uistyler.DialogState
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.uistyler.FileOperationData.FileOperationState
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.uistyler.FileOperationData.FileOperationState
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.uistyler.FileOperationData.FileOperationType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.uistyler.FileOperationData.FileOperationType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.uistyler.StylerEvent.Indicator
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.uistyler.StylerEvent.Indicator
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.uistyler.StylerEvent.Miscellaneous
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.uistyler.StylerEvent.Miscellaneous
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.uistyler.StylerEvent.Reason
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.uistyler.StylerEvent.Reason
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.uistyler.StylerItem.ItemType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.uistyler.StylerItem.ItemType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.Update.FailureOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.Update.FailureOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.Update.Option
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.Update.Option
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.userdefinedobjects.UserDefinedClass.AllowOwnedObjectSelection
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.userdefinedobjects.UserDefinedClass.AllowOwnedObjectSelection
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.userdefinedobjects.UserDefinedClass.AllowQueryClass
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.userdefinedobjects.UserDefinedClass.AllowQueryClass
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.userdefinedobjects.UserDefinedClass.Selection
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.userdefinedobjects.UserDefinedClass.Selection
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.userdefinedobjects.UserDefinedEvent.Reason
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.userdefinedobjects.UserDefinedEvent.Reason
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.userdefinedobjects.UserDefinedObject.LinkStatus
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.userdefinedobjects.UserDefinedObject.LinkStatus
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.userdefinedobjects.UserDefinedObject.LinkType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.userdefinedobjects.UserDefinedObject.LinkType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.FacetType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.FacetType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.StandardTextRef
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.StandardTextRef
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.TextRef
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.TextRef
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.TextSize
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.TextSize
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.ViewMode
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.ViewMode
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.userdefinedtemplate.InstantiationBuilder.JaUserdefinedtemplateLayerOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.userdefinedtemplate.InstantiationBuilder.JaUserdefinedtemplateLayerOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.validate.OverrideBuilder.DecisionActions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.validate.OverrideBuilder.DecisionActions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.validate.OverrideBuilder.RequestTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.validate.OverrideBuilder.RequestTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.validate.OverrideBuilder.ToStates
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.validate.OverrideBuilder.ToStates
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.validate.Parser.DataSourceTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.validate.Parser.DataSourceTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.validate.RequirementBuilder.DataTypeOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.validate.RequirementBuilder.DataTypeOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.validate.RequirementBuilder.DefinitionMethodOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.validate.RequirementBuilder.DefinitionMethodOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.validate.RequirementBuilder.RelationalOperatorOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.validate.RequirementBuilder.RelationalOperatorOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.validate.RequirementBuilder.SeverityOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.validate.RequirementBuilder.SeverityOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.validate.RequirementCheck.SaveResultsToTeamcenterOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.validate.RequirementCheck.SaveResultsToTeamcenterOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.validate.RequirementCollection.SourceTypeOptions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.validate.RequirementCollection.SourceTypeOptions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.validate.ResultObject.ResultTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.validate.ResultObject.ResultTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.validate.ValidatorOptions.LogModeTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.validate.ValidatorOptions.LogModeTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.validate.ValidatorOptions.ResultsDisplayModeTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.validate.ValidatorOptions.ResultsDisplayModeTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.validate.ValidatorOptions.SaveModeTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.validate.ValidatorOptions.SaveModeTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.validate.XmlComparator.Result
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.validate.XmlComparator.Result
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.Validation.InputType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.Validation.InputType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.Validation.MapType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.Validation.MapType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.Validation.Result
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.Validation.Result
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.Validation.UpdateTime
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.Validation.UpdateTime
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.View.Canned
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.View.Canned
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.View.RenderingStyleType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.View.RenderingStyleType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.View.ScaleAdjustment
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.View.ScaleAdjustment
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.View.ScaleFactor
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.View.ScaleFactor
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.View.ShowOrHideType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.View.ShowOrHideType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.ViewDependentDisplayManager.Font
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.ViewDependentDisplayManager.Font
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.ViewDependentDisplayManager.PartialShading
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.ViewDependentDisplayManager.PartialShading
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.ViewDependentDisplayManager.Translucency
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.ViewDependentDisplayManager.Translucency
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.ViewDependentDisplayManager.Width
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.ViewDependentDisplayManager.Width
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.visualreporting.Classifier.DateGroupMethodOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.visualreporting.Classifier.DateGroupMethodOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.visualreporting.Classifier.GroupingMethodOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.visualreporting.Classifier.GroupingMethodOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.visualreporting.Classifier.RangeMethodOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.visualreporting.Classifier.RangeMethodOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.visualreporting.Classifier.TypeOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.visualreporting.Classifier.TypeOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.visualreporting.Condition.OperatorOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.visualreporting.Condition.OperatorOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.visualreporting.Condition.TypeOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.visualreporting.Condition.TypeOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.visualreporting.GroupLabel.DisplayStyleOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.visualreporting.GroupLabel.DisplayStyleOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.visualreporting.GroupLabel.TagPriorityOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.visualreporting.GroupLabel.TagPriorityOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.visualreporting.Property.DatatypeOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.visualreporting.Property.DatatypeOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.visualreporting.Property.TypeOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.visualreporting.Property.TypeOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.visualreporting.VisualReportExplorer.ExploreReportOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.visualreporting.VisualReportExplorer.ExploreReportOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.visualreporting.VisualReportExplorer.ReportDownStatus
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.visualreporting.VisualReportExplorer.ReportDownStatus
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.visualreporting.VisualReportExplorer.ReportOnObjectsOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.visualreporting.VisualReportExplorer.ReportOnObjectsOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.VRMLImporter.AngularToleranceType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.VRMLImporter.AngularToleranceType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.VRMLImporter.FileUnitsType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.VRMLImporter.FileUnitsType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.WCS.Axis
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.WCS.Axis
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.AutoPointBuilder.InterferenceDetails
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.AutoPointBuilder.InterferenceDetails
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.AutoPointBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.AutoPointBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.CharacteristicsBuilder.Type
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.CharacteristicsBuilder.Type
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.CharacteristicsValueBuilder.Type
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.CharacteristicsValueBuilder.Type
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.ConnectionFinderBuilder.FilterTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.ConnectionFinderBuilder.FilterTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.DatumCommonBuilder.ControlMethodTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.DatumCommonBuilder.ControlMethodTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.DatumCommonBuilder.CreationDirectionMethods
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.DatumCommonBuilder.CreationDirectionMethods
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.DatumCommonBuilder.CustomTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.DatumCommonBuilder.CustomTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.DatumCommonBuilder.SolidTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.DatumCommonBuilder.SolidTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.DatumSurfaceBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.DatumSurfaceBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.EasyPatternBuilder.HemMethodTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.EasyPatternBuilder.HemMethodTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.EasyPatternBuilder.PlaneMethodTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.EasyPatternBuilder.PlaneMethodTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.EasyPatternBuilder.SpacingMethodTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.EasyPatternBuilder.SpacingMethodTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.EasyPatternBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.EasyPatternBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.EdgePrepValuesBuilder.Apply
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.EdgePrepValuesBuilder.Apply
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.EdgePrepValuesBuilder.Option
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.EdgePrepValuesBuilder.Option
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.ExportWeldBuilder.AttributeOriginType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.ExportWeldBuilder.AttributeOriginType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.ExportWeldBuilder.OutputType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.ExportWeldBuilder.OutputType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.FilletBuilder.EnumConstructionMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.FilletBuilder.EnumConstructionMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.FilletBuilder.EnumContour
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.FilletBuilder.EnumContour
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.FilletBuilder.EnumExtendEdges
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.FilletBuilder.EnumExtendEdges
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.FilletBuilder.EnumExtensionMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.FilletBuilder.EnumExtensionMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.FilletBuilder.EnumSkipWeldMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.FilletBuilder.EnumSkipWeldMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.FilletBuilder.EnumWeldingType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.FilletBuilder.EnumWeldingType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.InformationBuilder.AttributeOriginType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.InformationBuilder.AttributeOriginType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.JointExitBuilder.BodySide
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.JointExitBuilder.BodySide
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.JointExitBuilder.Positions
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.JointExitBuilder.Positions
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.JointmarkBuilder.ConnectedPanelTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.JointmarkBuilder.ConnectedPanelTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.JointmarkBuilder.Method
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.JointmarkBuilder.Method
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.JointmarkBuilder.OrientationMethodTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.JointmarkBuilder.OrientationMethodTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.JointmarkBuilder.ReferenceSheetTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.JointmarkBuilder.ReferenceSheetTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.JointmarkGuideBuilder.Location
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.JointmarkGuideBuilder.Location
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.JointmarkGuideBuilder.SpaceMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.JointmarkGuideBuilder.SpaceMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.JointmarkGuideBuilder.SpaceOption
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.JointmarkGuideBuilder.SpaceOption
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.JointmarkPointsBuilder.PointPosition
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.JointmarkPointsBuilder.PointPosition
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.OutputType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.OutputType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.PlugSlotBuilder.ArcProcessEnum
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.PlugSlotBuilder.ArcProcessEnum
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.PlugSlotBuilder.EnumContour
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.PlugSlotBuilder.EnumContour
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.PointMarkBuilder.WeldTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.PointMarkBuilder.WeldTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.SurfaceWeldBuilder.DestinationTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.SurfaceWeldBuilder.DestinationTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.WeldAdvisorCheckerType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.WeldAdvisorCheckerType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.WeldAdvisorCustomerDefault
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.WeldAdvisorCustomerDefault
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.WeldArcMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.WeldArcMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.WeldAttribType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.WeldAttribType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.WeldBeadBuilder.BeadLocationMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.WeldBeadBuilder.BeadLocationMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.WeldBeadBuilder.OutputTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.WeldBeadBuilder.OutputTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.WeldBeadBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.WeldBeadBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.WeldBeadPathBuilder.OffsetMethodType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.WeldBeadPathBuilder.OffsetMethodType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.WeldCustom
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.WeldCustom
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.WeldFacesetIndex
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.WeldFacesetIndex
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.WeldFeatureOutput
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.WeldFeatureOutput
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.WeldFeatureSetType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.WeldFeatureSetType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.WeldFillBuilder.BoundaryMethodType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.WeldFillBuilder.BoundaryMethodType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.WeldFillBuilder.WidthAlongType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.WeldFillBuilder.WidthAlongType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.WeldGrooveBuilder.Contour
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.WeldGrooveBuilder.Contour
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.WeldGrooveBuilder.Edge
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.WeldGrooveBuilder.Edge
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.WeldGrooveBuilder.Prepare
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.WeldGrooveBuilder.Prepare
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.WeldGrooveBuilder.SkipWeldMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.WeldGrooveBuilder.SkipWeldMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.WeldGrooveBuilder.Taper
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.WeldGrooveBuilder.Taper
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.WeldGrooveBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.WeldGrooveBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.WeldGrooveExtension
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.WeldGrooveExtension
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.WeldGrooveType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.WeldGrooveType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.WeldGroupIdColor
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.WeldGroupIdColor
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.WeldJointBuilder.Application
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.WeldJointBuilder.Application
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.WeldJointBuilder.CoordinateSystem
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.WeldJointBuilder.CoordinateSystem
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.WeldJointBuilder.DestinationTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.WeldJointBuilder.DestinationTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.WeldJointBuilder.SplitTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.WeldJointBuilder.SplitTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.WeldJointBuilder.Types
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.WeldJointBuilder.Types
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.WeldJointBuilder.WeldTypes
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.WeldJointBuilder.WeldTypes
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.WeldLabelBuilder.OrientationPlaneType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.WeldLabelBuilder.OrientationPlaneType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.WeldMeasurementSizeMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.WeldMeasurementSizeMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.WeldObjectBuilder.CommandName
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.WeldObjectBuilder.CommandName
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.WeldOverlapStatus
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.WeldOverlapStatus
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.WeldParasetLocation
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.WeldParasetLocation
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.WeldPmiBuilder.OrientationPlaneType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.WeldPmiBuilder.OrientationPlaneType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.WeldPointExitBuilder.CommandName
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.WeldPointExitBuilder.CommandName
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.WeldPointExitBuilder.MethodUsed
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.WeldPointExitBuilder.MethodUsed
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.WeldPointExtendMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.WeldPointExtendMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.WeldPointLocation
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.WeldPointLocation
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.WeldPointMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.WeldPointMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.WeldPointReferenceSheetType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.WeldPointReferenceSheetType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.WeldPointSpacingMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.WeldPointSpacingMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.WeldPrepareEdges
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.WeldPrepareEdges
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.WeldProjectionMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.WeldProjectionMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.WeldRootUpdate
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.WeldRootUpdate
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.WeldSelectionType
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.WeldSelectionType
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.WeldSpacingCalcMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.WeldSpacingCalcMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOf(int) - Static method in class nxopen.weld.WeldTaperMethod
-
Returns the enum constant of the specified enum type with the specified value.
- valueOf(String) - Static method in class nxopen.weld.WeldTaperMethod
-
Returns the enum constant of the specified enum type with the specified name.
- valueOfDegression() - Method in interface nxopen.cam.StepoverBuilder
-
Returns the Value of Degression
License requirements: None.
- valueOffset() - Method in interface nxopen.mechatronics.GraphControlBuilder
-
Returns the value offset.
- valueOption() - Method in interface nxopen.features.ResizeCurveBuilder
-
Returns the size option
License requirements: None.
- valuePrecision - Variable in class nxopen.annotations.Value
-
Value precision
- valuePrecision() - Method in interface nxopen.tooling.AutoDimensionBuilder
-
Returns the value precision
License requirements: None.
- valueReduction() - Method in interface nxopen.geometricutilities.ReduceSurfaceRadiusBuilder
-
Returns the value of reduction value method
License requirements: None.
- values() - Static method in class nxopen.annotations.AlignmentPosition
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.AngularDimensionFormat
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.AngularSuppressZeros
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.ArcComponent.ArcType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.AreaFillMaterial
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.ArrowDisplay
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.ArrowheadType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.AssociativeOriginType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.AssociativeText.PropertyType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.AssociativityLineOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.AssociativityPointOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.AutomaticCenterlineBuilder.CenterlineThickness
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.BaseCustomSymbolBuilder.AnnotationPreferences
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.BaseCustomSymbolBuilder.GeometryPreferences
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.BaseFrameBarBuilder.AxisType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.BaseOrdinateDimensionBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.BaseSurfaceFinishBuilder.ParanthesesType
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.BaseSurfaceFinishBuilder.ParenthesesType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.BaseSurfaceFinishBuilder.ToleranceOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.BillOfMaterialBuilder.DetailLevelType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.BillOfMaterialBuilder.FabricationNumberingType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.BillOfMaterialBuilder.StockLengthType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.BoundaryBuilder.SelectionMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.Centerline2dBuilder.Offset
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.Centerline2dBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.Centerline3dBuilder.Offset
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.CenterlineSettingsBuilder.CenterlineThickness
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.ChamferForm
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.ChamferLeaderPlacement
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.ChamferOrientationType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.ChamferSeparatorType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.ChamferStubType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.ChamferSymbolPlacement
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.CircleCenterlineBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.Constants
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.CuttingPlaneSymbolBuilder.TextPlaneRelativeArrow
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.CuttingPlaneSymbolBuilder.ViewNameFormatOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.DatumReferenceBuilder.DatumReferenceMaterialCondition
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.DatumTargetBuilder.StandardTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.DatumTargetBuilder.TerminatorTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.DatumTargetBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.DecimalPointCharacter
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.DiameterRadiusLeaderStub
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.DiameterRadiusSymbolPlacement
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.DiameterSymbol
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.Dimension.MeasurementTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.DimensionMeasurementBuilder.MeasurementMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.DimensionSetBuilder.DimensionSetMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.DimensionTextFormat
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.DimensionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.DimensionUnit
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.DisplayPmiEffectivityMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.DraftingImage.FileType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.DraftingNoteBuilder.TextAlign
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.DraftingNoteBuilder.ThicknessTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.DraftingSurfaceFinishBuilder.FinishType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.DrawingFormatTitleBuilder.TitleBlockPositionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.DrivingValueBuilder.DrivingExpressionMode
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.DrivingValueBuilder.DrivingValueMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.DualDimensionPlacement
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.EditSymbolDisplayBuilder.FontTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.EditSymbolDisplayBuilder.WidthTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.ExtensionLineDisplay
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.FeatureControlFrameBuilder.FcfCharacteristic
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.FeatureControlFrameBuilder.FcfFrameStyle
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.FeatureControlFrameDataBuilder.AreaSymbolType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.FeatureControlFrameDataBuilder.ToleranceMaterialModifier
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.FeatureControlFrameDataBuilder.ToleranceZoneShape
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.FinishMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.FitAnsiHoleType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.FitAssemblyDisplayStyle
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.FitDisplayStyle
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.FlipOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.ForeshorteningSymbolSettingsBuilder.MethodType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.ForeshorteningSymbolSettingsBuilder.SymbolType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.FractionDenominatorFormat
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.FrameBarElements
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.GeometricCharacteristic
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.HatchBuilder.AnnotationTypes
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.HatchFillSettingsBuilder.AnnotationTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.HoleCalloutSettingsBuilder.Featuretype
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.HoleCalloutSettingsBuilder.LeaderAttachment
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.HoleCalloutSettingsBuilder.Parametertype
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.HoleTableSettingsContentBuilder.Content
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.HoleTableSettingsFormatBuilder.DeletedHolesDisplayType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.HoleTableSettingsFormatBuilder.DepthMeasurementDatumType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.HoleTableSettingsFormatBuilder.ShowColumnsType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.HoleTableSettingsFormatBuilder.SizeFormatType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.HoleTableSettingsHoleFiltersBuilder.ScopeType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.HoleTableSettingsLabelBuilder.IndexType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.HoleTableSettingsLabelBuilder.RelativeLocationType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.IdentificationLineLocation
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.IdSymbolBuilder.SymbolTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.ImportAutocadBlockBuilder.FileFolder
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.ImportAutocadBlockBuilder.Type
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.ImportSymbolBuilder.FileFolder
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.IntersectionSymbolBuilder.Thickness
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.JogOrientation
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.LeaderAlignment
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.LeaderAttachment
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.LeaderData.ArrowheadType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.LeaderData.LeaderType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.LeaderOrientation
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.LeaderSide
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.LeaderType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.LeaderVerticalAttachment
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.LineComponent.LineType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.LineWeldBuilder.FieldWeldType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.LineWeldBuilder.IdLineType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.LineWeldBuilder.StaggeredWeldType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.LineWeldBuilder.TailType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.LineWeldBuilder.WeldSymbolWeldAlongContourType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.LineWeldDataBuilder.ContourSymbolType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.LineWeldDataBuilder.FinishSymbolType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.LineWeldDataBuilder.WeldSizeCodeType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.LineWeldDataBuilder.WeldSymbolType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.LineWidth
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.MasterSymbolBuilder.LeaderAttachmentType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.MasterSymbolListItemBuilder.TextTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.MaterialConditionModifier
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.NarrowDisplayOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.NarrowTextOrientation
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.OffsetCenterPointBuilder.Display
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.OffsetCenterPointBuilder.Offset
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.OffsetCenterPointBuilder.Thickness
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.OrdinateDoglegCreationOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.OrdinateDoglegDefinition
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.OrdinateLineArrowDisplayOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.OrdinateOriginDisplayOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.OriginBuilder.AlignmentPosition
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.PartsListBuilder.PartsListGrowDirectionOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.PartsListBuilder.PartsListMainSymbolText
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.PartsListBuilder.PartsListReferenceSymbolText
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.PartsListBuilder.PartsListShowLockedDeletedRows
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.PartsListBuilder.PartsListSymbolType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.PartsListBuilder.PartsListVerticalGroupLeaderAttachment
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.PinListBuilder.FilterType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.PlaneBuilder.PlaneMethodType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.PmiDefaultPlane
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.PmiFilter.ComponentMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.PmiFilter.FilterType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.PmiFilterByType.Type
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.PmiResizeMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.RadiusDimensionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.RadiusSymbol
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.RegionBuilder.AlignmentPosition
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.RegionBuilder.CrosshatchPatterns
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.RegionBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.SearchCriteriaCalloutBuilder.CalloutTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.SearchCriteriaDatumTargetBuilder.DatumTargetMovableOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.SearchCriteriaDatumTargetBuilder.DatumTargetTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.SearchCriteriaDimensionBuilder.DiameterSymbolOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.SearchCriteriaDimensionBuilder.DimensionTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.SearchCriteriaDimensionBuilder.MeasurementTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.SearchCriteriaDimensionBuilder.RadialSymbolOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.SearchCriteriaDimensionBuilder.ToleranceTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.CharacteristicOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.CircleUOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.FrameStyleOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.FreeStateOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.PrimaryDatumDualMCMOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.PrimaryDatumMCMOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.ProjectedOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.SecondaryDatumDualMCMOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.SecondaryDatumMCMOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.StatisticalOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.TangentPlaneOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.TertiaryDatumDualMCMOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.TertiaryDatumMCMOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.ToleranceMCMOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.ZoneShapeOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.SearchCriteriaSurfaceFinishBuilder.SurfaceFinishTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.SearchCriteriaSurfaceFinishBuilder.ToleranceTypeOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.SearchModelViewBuilder.PmiTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.SearchModelViewBuilder.SearchScopeOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.SearchModelViewBuilder.TextComparisionOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.SearchModelViewBuilder.ValueComparisionOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.ShipDimensionBuilder.GroupType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.ShipDraftingFramebarGeneralBuilder.TicDirectionTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.SizeLetterCode
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.StackAlignmentPosition
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.StackHorizontalAlignment
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.StackVerticalAlignment
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.SupplementarySymbol
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.SurfaceFinishBuilder.FinishType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.SurfaceFinishBuilder.StandardType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.SurfaceFinishStandard
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.Symbol
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.SymbolPreferencesOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.SymbolStyleBuilder.FcfTextUnderlineOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.SymmetricalCenterlineBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.TableCellStyleBuilder.BorderLocationType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.TableCellStyleBuilder.CellFormatTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.TableCellStyleBuilder.DateFormatTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.TableCellStyleBuilder.FitMethodType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.TableCellStyleBuilder.FormatType
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.TableCellStyleBuilder.TabDirectionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.TableCellStyleBuilder.TextAlignmentType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.TableCellStyleBuilder.TimeFormatTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.TableCellStyleBuilder.ZeroDisplayType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.TableSectionStyleBuilder.AlignmentPositionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.TableSectionStyleBuilder.ContinuationPropertyType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.TableSectionStyleBuilder.DisplayContinuationNoteType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.TableSectionStyleBuilder.LocationOfHeader
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.TabularNoteStyleBuilder.ShowLockedDeletedRowMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.Tail
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.TargetPointBuilder.Thickness
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.TextComponent.TextType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.TextJustification
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.TextOrientation
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.TextPlacement
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.TextPosition
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.TextPreferencesOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.TextType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.TextWithSymbolsBuilder.SymbolPreferencesType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.TextWithSymbolsBuilder.SymbolSizingMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.TolerancePlacement
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.ToleranceType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.TrimDimensionLineStyle
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.TrueLengthTextPosition
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.UserSymbolPreferences.SizeType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.VerticalTextJustification
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.WeldStandard
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.annotations.ZeroToleranceDisplayStyle
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.ApparentChainingRuleSelection
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.ApparentChainingRuleType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.ASCImporter.Units
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.assemblies.AssembliesChildRevisionOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.assemblies.AssembliesEventTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.assemblies.AssembliesGeneralPropertiesBuilder.HiddenOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.assemblies.AssembliesGeneralPropertiesBuilder.LayerOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.assemblies.AssembliesGeneralPropertiesBuilder.QuantityOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.assemblies.AssembliesGeneralPropertiesBuilder.ReferenceComponentOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.assemblies.AssembliesParameterPropertiesBuilder.ArrangementOptions
-
Returns an array that contains the values for this enum.
- values - Variable in class nxopen.assemblies.AttributeSearchTermBuilder.CriteriaData
-
search criteria values
- values() - Static method in class nxopen.assemblies.BoxSearchTerm.BoxOverlapLogicType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.assemblies.ClearanceAnalysisBuilder.CalculationMethodType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.assemblies.ClearanceAnalysisBuilder.ClearanceBetweenEntity
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.assemblies.ClearanceAnalysisBuilder.ClearanceZoneSource
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.assemblies.ClearanceAnalysisBuilder.CollectionRange
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.assemblies.ClearanceAnalysisBuilder.NumberOfCollections
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.assemblies.ClearanceAnalysisBuilder.PairExcludedReason
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.assemblies.ClearanceAnalysisBuilder.ZoneType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.assemblies.ClearanceSet.CopyMode
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.assemblies.ClearanceSet.InterferenceType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.assemblies.ClearanceSet.JobStatus
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.assemblies.ClearanceSet.PenetrationDepthResult
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.assemblies.ClearanceSet.ReanalyzeOutOfDateExcludedPairs
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.assemblies.ClearanceSet.ReanalyzePairCalculationMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.assemblies.CollaborativeContentType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.assemblies.Component.RepresentationMode
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.assemblies.ComponentAssembly.CheckinCheckoutOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.assemblies.ComponentAssembly.CloseModified
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.assemblies.ComponentAssembly.OpenComponentStatus
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.assemblies.ComponentAssembly.OpenOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.assemblies.ComponentAssembly.OrderTargetLocation
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.assemblies.ComponentAssembly.SubstitutionMode
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.assemblies.ComponentAssembly.SuppressedState
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.assemblies.ComponentQuantity
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.assemblies.ConstraintDisplayBuilder.VisibleConstraintsRuleOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.assemblies.CreateNewComponentBuilder.ComponentCamType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.assemblies.CreateNewComponentBuilder.ComponentLayerOptionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.assemblies.CreateNewComponentBuilder.ComponentOriginType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.assemblies.CreateNewComponentBuilder.ComponentReferenceSetType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.assemblies.DegreesOfFreedomResult
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.assemblies.DegreesOfFreedomStatus
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.assemblies.DesignElementBuilder.EditActionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.assemblies.DesignElementBuilder.LayerOptionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.assemblies.DesignElementBuilder.OperationType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.assemblies.DesignElementBuilder.PositioningOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.assemblies.DesignElementBuilder.ReferenceSetType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.assemblies.DesignElementBuilder.SaveAsActionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.assemblies.DesignElementBuilder.StateType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.assemblies.FindInCollaborativeDesign.ObjectType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.assemblies.FindInCollaborativeDesign.SearchType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.assemblies.LoadInterpartDataBuilder.OpenUnloadedParentsType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.assemblies.LoadInterpartDataBuilder.SelectionScopeType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.assemblies.MakeUniquePartBuilder.Option
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.assemblies.Order.State
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.assemblies.Order.Type
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.assemblies.PlaneSearchTerm.PlaneOverlapLogicType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.assemblies.PositionOverrideType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.assemblies.productinterface.ObjectBuilder.BuilderVersion
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.assemblies.productinterface.ObjectBuilder.Mate
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.assemblies.productinterface.ObjectBuilder.Wave
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.assemblies.ProductOutlineBuilder.LineFont
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.assemblies.RelinkerBuilder.LinkCategory
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.assemblies.RelinkerBuilder.LinkOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.assemblies.RelinkerBuilder.LinkScope
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.assemblies.RelinkerBuilder.LinkType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.assemblies.ReplaceComponentBuilder.ComponentLayerOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.assemblies.ReplaceComponentBuilder.ComponentNameOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.assemblies.ReplaceComponentBuilder.ComponentReferenceSet
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.assemblies.SearchTerm.SearchTermLogicType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.assemblies.Subset.PartitionViewStyleType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.AttributePropertiesBaseBuilder.BooleanValueOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.AttributePropertiesBaseBuilder.DataTypeOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.AttributePropertiesBaseBuilder.ObjectOptions
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.AttributePropertiesBuilder.OperationType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.AttributeTemplatesBuilder.AccessKey
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.AttributeTemplatesBuilder.ConstraintOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.AttributeTemplatesBuilder.DefaultBooleanOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.AttributeTemplatesBuilder.TemplatesOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.AutomaticTraceline.ModeOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.AxisOrientation
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.BasePart.BookmarkOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.BasePart.CloseAfterSave
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.BasePart.CloseModified
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.BasePart.CloseWholeTree
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.BasePart.CollaborativeContentType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.BasePart.PartPreview
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.BasePart.SaveComponents
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.BasePart.Units
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.blockstyler.BlockDialog.DialogMode
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.blockstyler.PropertyList.ListMode
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.blockstyler.PropertyList.PropertyType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.blockstyler.SelectObject.FilterType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.blockstyler.SetList.InsertionLocation
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.blockstyler.Tree.BeginLabelEditState
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.blockstyler.Tree.ColumnDisplay
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.blockstyler.Tree.ColumnResizePolicy
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.blockstyler.Tree.ColumnSortOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.blockstyler.Tree.ControlType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.blockstyler.Tree.EditControlOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.blockstyler.Tree.EndLabelEditState
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.blockstyler.Tree.NodeInsertOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.blockstyler.Wizard.SubNodeAction
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.blockstyler.Wizard.TaskNavigatorItem
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.bodydes.OnestepUnformBuilder.Constraint
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.bodydes.OnestepUnformBuilder.Convergency
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.bodydes.OnestepUnformBuilder.DisplaySpringbackMode
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.bodydes.OnestepUnformBuilder.MeshElement
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.bodydes.OnestepUnformBuilder.Object
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.bodydes.OnestepUnformBuilder.Part
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.bodydes.OnestepUnformBuilder.Process
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.bodydes.OnestepUnformBuilder.Surface
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.bodydes.OnestepUnformBuilder.UnfoldMode
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.AfuData.AbscissaType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.AfuData.OrdinateType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.AfuDataConvertor.Fft
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.AfuManager.WritingFileMode
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.AfuMathOperation.InterpolationMode
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.AfuMathOperation.MultiType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.AfuMathOperation.OuterInterpolation
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.AfuMathOperation.OutputType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.AfuMathOperation.Overall
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.AfuMathOperation.SrsToTimeOctave
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.AfuMathOperation.SrsToTimeOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.AfuMathOperation.SrsToTimeStrategy
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.AfuMathOperation.TimeToSrsAxisType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.AfuMathOperation.TimeToSrsResponseType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.AssignNodalCSBuilder.Cs
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.AssignNodalCSBuilder.CSType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.AssignNodalCSBuilder.GeometryOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.AssyFEModel.MappedComponentRemovalType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.AssyFEModel.RepositionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.AutomaticMorphBuilder.OrphanNodeMovementType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.BaseFemPart.AxisymAbstractionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.BaseIteration.IterationType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.BaseIteration.IterationValueType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.BeamEADBuilder.EndReleaseSetting
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.BeamEADBuilder.OrientationMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.BeamEADBuilder.State
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.BeamEADBuilder.VectorChoiceType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.BeamSection.DirectionOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.BeamSectionOffsetOptions.Method
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.BeamSectionOrientationOptions.Method
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.BoltBuilder.BoltOperation
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.BoltBuilder.Selection
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.BoltBuilder.SpiderDiameter
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.BushingEADBuilder.OrientationMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.BushingEADBuilder.State
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.CaeSetGroupFilterType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.CaeSetObjectSubType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.CfdContactPreventionConstraintBuilder.LocalSubdivisions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.CfdContactPreventionConstraintBuilder.Priority
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.CfdContactPreventionConstraintBuilder.Sizing
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.CfdLocalResolutionConstraintBuilder.LocalSubdivisions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.CfdLocalResolutionConstraintBuilder.Priority
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.CfdLocalResolutionConstraintBuilder.ResolutionDensity
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.CfdLocalResolutionConstraintBuilder.Sizing
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.CircularImprintBuilder.AroundEdgeDiaType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.CompanionResultBuilder.CompanionResultDisposition
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.CompanionResultBuilder.ResultAppendMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ConflictResolutionBuilder.Rule
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ConstraintResolutionBuilder.Rule
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ContactMeshBuilder.AlignmentType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.CorrelAlignmentBuilder.ScalingChoice
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.CorrelFineTuneAlignmentBuilder.AngleVector
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.CorrelFineTuneAlignmentBuilder.DistanceVector
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.CorrelModePairingBuilder.Auto
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.CorrelShapemetrictype
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.CorrelSolutionBuilder.EnumDampingFrftype
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.CreateJtBuilder.Component
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.DependentMeshBuilder.MeshType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.DisplaySectionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.DurabilityDamageEvaluationBuilder.BwiWeldClassEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.DurabilityDamageEvaluationBuilder.CyclicStressStrainModelEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.DurabilityDamageEvaluationBuilder.EquivalentStressMethodEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.DurabilityDamageEvaluationBuilder.FatigueLifeCriterionEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.DurabilityDamageEvaluationBuilder.ProbabilityOptionEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.DurabilityDataControlBuilder.TimeExtentsEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.DurabilityEvaluateFatigueHistoryBuilder.FatigueHistoryDataTypeEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.DurabilityEventFatigueSettingsBuilder.BwiWeldClassEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.DurabilityEventFatigueSettingsBuilder.CyclicStressStrainModelEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.DurabilityEventFatigueSettingsBuilder.EquivalentStressMethodEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.DurabilityEventFatigueSettingsBuilder.FatigueLifeCriterionEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.DurabilityEventFatigueSettingsBuilder.FatigueSafetyFactorMethodEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.DurabilityEventFatigueSettingsBuilder.FatigueSafetyFactorOutputEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.DurabilityEventFatigueSettingsBuilder.MaximumAlternatingStressEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.DurabilityEventFatigueSettingsBuilder.OrthotropicFatigueCriterionEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.DurabilityEventFatigueSettingsBuilder.OrthotropicMeanStressEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.DurabilityEventFatigueSettingsBuilder.ProbabilityOptionEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.DurabilityEventOverridesBuilder.UseElementsEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.DurabilityEventSolverBuilder.SubmitOptionsEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.DurabilityEventStrengthSettingsBuilder.OrthotropicFailureCriterionEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.DurabilityEventStrengthSettingsBuilder.StressCriterionEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.DurabilityEventStrengthSettingsBuilder.StressTypeEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.DurabilityLoadPatternBuilder.PatternTypeEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.DurabilityRandomFatigueBuilder.RandomFatigueMethodEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.DurabilitySolverBuilder.ActiveEventSolveOptionsEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.DurabilitySolverBuilder.SubmitOptionsEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.DurabilityStaticEventBuilder.ExcitationTypeEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.DurabilityStrainGageAnalyzerBuilder.AxisDirectionSearchMethodEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.DurabilityStrainGageAnalyzerBuilder.CriticalPlaneOptionEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.DurabilityStrainGageAnalyzerBuilder.GageConstructionEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.DurabilityStrainGageAnalyzerBuilder.GageSourceEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.DurabilityStrainGageAnalyzerBuilder.GageTypeEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.DurabilityStressAxesBuilder.BeamStressEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.DurabilityStressAxesBuilder.ElementFaceStressAxisEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.DurabilityStressAxesBuilder.NodeElementOptionEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.DurabilityStressAxesBuilder.ShellRegionEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.DurabilityStressAxesBuilder.StressAxisDirectionSearchMethodEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.DurabilityStressAxesBuilder.StressAxisMethodEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.EdgeSticherBuilder.StitchMethods
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.EdgeSticherBuilder.StitchOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.EdgeSticherBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ElementConnectivityBuilder.Methods
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ElementConnectivityBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ElementCreateBuilder.ElemDimType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ElementCreateBuilder.NewMeshType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ElementExtrudeBuilder.DistanceType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ElementExtrudeBuilder.ElemDimType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ElementExtrudeBuilder.MethodType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ElementExtrudeBuilder.NewMeshType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ElementModifyLabelBuilder.LabelType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ElementModifyOrderBuilder.Midnode
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ElementModifyOrderBuilder.Operation
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ElementNormalsType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ElementProjectBuilder.ElementDimensionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ElementProjectBuilder.LabelType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ElementProjectBuilder.MethodType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ElementProjectBuilder.NewMeshType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ElementReflectBuilder.ElemDimType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ElementReflectBuilder.LabelType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ElementReflectBuilder.NewMeshType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ElementRevolveBuilder.AngleType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ElementRevolveBuilder.ElemDimType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ElementRevolveBuilder.NewMeshType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ElementSplitBuilder.SplitMethodType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ElementSplitBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ElementTranslateBuilder.DistanceType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ElementTranslateBuilder.ElemDimensionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ElementTranslateBuilder.LabelType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ElementTranslateBuilder.MethodType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ElementTranslateBuilder.NewMeshType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ElementTypeBuilder.ElementOrderType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ElementTypeBuilder.ElementType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ElementTypes.Order
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ElementTypes.Shape
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.FEModelOccAttribute.AltRepDisplayStyle
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.FEModelOccAttribute.RepType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.FemPart.UseBodiesOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.FluidDomainBuilder.IntExtType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.FreeBodyResultsBuilder.LocationMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.FreeBodyResultsBuilder.OutputUnits
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.FreeBodyResultsBuilder.VectorDisplay
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ftk.DataManager.AfuRecordZValue
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.Function.InterpolationMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.Function.Type
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.GapEADBuilder.OrientationMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.GapEADBuilder.State
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.GroupElemMethodElemOption.ElemOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.Laminate.ZoneType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.LaminateDrapingDataBuilder.DrapingDirectionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.LaminateDrapingDataBuilder.DrapingPathType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.LaminateDrapingDataBuilder.SecondaryVectorType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.LaminateDrapingDataBuilder.SolverType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.LaminateDynamicEventBuilder.ExcitationSelectedAxisEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.LaminateDynamicEventBuilder.ReferenceTypeEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.LaminateGlobalLayup.StackingRecipeType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.LaminateImportedLayupBuilder.ApiTypeEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.LaminateImportedLayupBuilder.FileEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.LaminateImportedLayupBuilder.ImportMethodEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.LaminatePly.InterLaminarFailureTheoryType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.LaminatePly.PlyFailureTheoryType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.LaminatePly.SolidPropertyType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.LaminateRandomEventBuilder.ConfidenceLevelOptionEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.LaminateRandomEventBuilder.ExcitationAxisEnum
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.LaminateRandomEventBuilder.ReferenceEnum
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.LaminateRelabelPliesBuilder.RelabelOptionEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.LaminateSineEventBuilder.AdditionalFrequeciesUnitsEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.LaminateSineEventBuilder.IntermediateFrequeciesBetweenEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.LaminateSineEventBuilder.IntermediateFrequeciesEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.LaminateSineEventBuilder.NaturalFrequeciesEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.LaminateViewDrapingResultsBuilder.OuputChoice
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.LbcAssociationMgr.BcType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.LocalRemeshBuilder.Option
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.LumpedMassEADBuilder.State
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ManualMorphBuilder.MapMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ManualMorphBuilder.MapType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.MappedMeshBuilder.MidNodeType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.MarkerType0d
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.MechanicalLoadSumBuilder.UserUnit
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.Mesh2dBuilder.GeometryType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.Mesh3dHexBuilder.Type
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.MeshCollectorBuilder.ElementDimensionOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.MeshControlBuilder.CylinderAxialElementSizeType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.MeshControlBuilder.CylinderCircularSizeType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.MeshControlBuilder.FilletAxialElementSizeType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.MeshControlBuilder.FilletCircumferenceSizeType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.MeshControlBuilder.FilletType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.MeshControlBuilder.HeightDefinedByOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.MeshControlBuilder.ProgressionTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.MeshControlBuilder.SizeTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.MeshControlBuilder.SizingType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.MeshControlBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.MeshControlBuilder.WeldSide
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.MeshFromBoundaryBuilder.LoopOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.MeshFromBoundaryBuilder.RailOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.MeshPointMultipleOnCurveBuilder.PlacementType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.MMCCreateBuilder.FaceSearchType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.MMCCreateBuilder.MeshMatingType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.MMCCreateBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.modelcheck.AlignShellElementNormalBuilder.ConnectedElementScope
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.modelcheck.DuplicateElementsCheckBuilder.DeletePreference
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.modelcheck.DuplicateNodesCheckBuilder.ListOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.modelcheck.DuplicateNodesCheckBuilder.MergePreference
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.modelcheck.ElementEdgeCheckBuilder.Scope
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.modelcheck.ElementMaterialOrientationCheckBuilder.MaterialOrientationType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.modelcheck.ElementQualityCheckBuilder.OutputElements
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.modelcheck.ElementQualityCheckBuilder.ReportFormat
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.modelcheck.ElementQualitySetting.LimitValue
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.modelcheck.TestValueTypes.CriteriaType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.modelcheck.TestValueTypes.Result
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.modelcheck.TestValueTypes.TestType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.modelcheck.TestValueTypes.Validator
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ModelDisplayBuilder.ElemQualPass
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ModelDisplayBuilder.ElmClrBasis
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ModelDisplayBuilder.ElmDispQuality
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ModelDisplayBuilder.FreeEdgeFont
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ModelDisplayBuilder.FreeEdgeMarker
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ModelDisplayBuilder.FreeEdgeWidth
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ModelDisplayBuilder.NodeDisplayModeType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ModelDisplayBuilder.NodeMarkerType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ModelDisplayBuilder.NodeMeshShowHideOptionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ModelDisplayBuilder.NodeUnattachedMarkerType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ModelDisplayBuilder.StitchedEdgeFont
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ModelDisplayBuilder.StitchedEdgeMarker
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ModelDisplayBuilder.StitchedEdgeWidth
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ModelUpdateCorrelMethodBuilder.Method
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ModelUpdateDesignVariablesRapidCreateBuilder.DesignVariableTypeEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ModelUpdateDesignVariablesRapidCreateBuilder.MaterialTypesEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ModelUpdateDesignVariablesRapidCreateBuilder.PhysicalTypesEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ModelUpdateOptimOptionsBuilder.MethodChoice
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ModelUpdateOptimOptionsBuilder.SteepestDescMethodChoice
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ModelUpdateSolution.TargetType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.NodeElementInfoBuilder.EntityType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.NodeElementInfoBuilder.FormatType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.NodeElementInfoBuilder.PropertyType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.NodeModifyLabelBuilder.LabelType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.NodeProjectBuilder.LabelType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.NodeProjectBuilder.NodeProjectTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.NodeProjectBuilder.ProjectionMethodType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.NodeReflectBuilder.CopyType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.NodeReflectBuilder.LabelType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.NodeRotateBuilder.CopyType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.NodeRotateBuilder.DistanceType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.NodeRotateBuilder.LabelType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.NodesBetweenNodesBuilder.TypeEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.NodesOnCurveBuilder.PlacementType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.NodeTranslateBuilder.CopyType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.NodeTranslateBuilder.DistanceType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.NodeTranslateBuilder.LabelType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.NodeTranslateBuilder.MethodType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.OneDimensionalElementSplitBuilder.SplitMethodType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.optimization.Category
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.optimization.DAODesignVariableBuilder.Variable
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.optimization.Geometry
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.optimization.Goal
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.optimization.Hookes
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.optimization.Limit
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.optimization.Response
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.optimization.Solver
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.optimization.TBSBaseDesignVariableBuilder.GroupOperator
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.optimization.TBSCastCondition.MiddlePlaneType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.optimization.TBSCheckDOF.CheckDofOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.optimization.TBSConstraintBuilder.ConstraintOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.optimization.TBSConstraintBuilder.MagnitudeType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.optimization.TBSGroupDefinition.DefinitionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.optimization.TBSGroupDefinition.GroupElementType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.optimization.TBSLoadCase.LayerOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.optimization.TBSLoadCaseManager.SelectionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.optimization.TBSMeshSmooth.Strategy
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.optimization.TBSObjectives.ObjectiveType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.optimization.TBSOptimizationSolution.ResultStatus
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.optimization.TBSOptimizationSolutionBuilder.StrategyType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.optimization.TBSOutputControlOptions.Op2Option
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.optimization.TBSShapeLinkCondition.ManufacturingOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.optimization.TBSShapeOptimizationParameters.DisplacementStepsize
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.optimization.TBSSmoothBuilder.Format
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.optimization.TBSSmoothBuilder.IsoType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.optimization.TBSSmoothBuilder.OriginalSurfaceSmoothingOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.optimization.TBSSmoothBuilder.ResultFiltering
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.optimization.TBSSmoothBuilder.SelfIntersectionCheckingOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.optimization.TBSSmoothBuilder.SliceFormatOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.optimization.TBSTestFunction.Direction
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.optimization.TBSTopologyControllerOptimizationParameters.AutoFrozen
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.optimization.TBSTopologyControllerOptimizationParameters.Speed
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.optimization.TBSTopologyControllerOptimizationParameters.VolumeDefinitionMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.optimization.TBSTopologyLinkCondition.AxisType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.optimization.TBSTopologyLinkCondition.SymmetryOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.optimization.TBSTopologyRestrictAreaBuilder.CheckTypeOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.optimization.TBSTopologySensitivityOptimizationParameters.DensityUpdate
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.optimization.TBSTopologySensitivityOptimizationParameters.MaterialInterpolation
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.PolygonFaceOnMeshBuilder.PolygonFaceOnMeshType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.PolygonFaceOnMeshBuilder.SelectBodyMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.Post.Abcissa
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.Post.AnimationControl
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.Post.AnimationIterationTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.Post.AnimationStyle
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.Post.AnimationType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.Post.AxisymetricAxis
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.Post.ClipPlane
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.Post.ClipSide
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.Post.EdgeStyle
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.Post.Export
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.Post.FaceStyle
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.Post.Format
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.Post.GroupVisibility
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.Post.IntegrationScheme
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.Post.Legend
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.Post.LimitDisplay
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.Post.MarkColor
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.Post.Marker
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.Post.MarkHide
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.Post.MarkLocation
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.Post.MarkMaximumSize
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.Post.MarkRenderStyle
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.Post.MarkSize
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.Post.MarkTensorStyle
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.Post.NoDataTreatment
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.Post.NodeValueSharingCriterion
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.Post.Position
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.Post.Scale
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.Post.ShowHeader
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.Post.Spectrum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.Post.StreamlineColor
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.Post.StreamlineDirection
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.Post.StreamlineLineWeight
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.Post.StreamlineSize
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.Post.StreamlineStyle
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.Post.StreamlineSynchronization
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.Post.Style
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.Post.Target
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.Post.Threshold
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.Post.ValueSharingCriterion
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.PostGraphAcrossIterationsBuilder.CombinationMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.PostGraphAcrossIterationsBuilder.IterationLabelingOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.PostGraphAlongPathBuilder.CoordinateSysAxis
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.PostGraphAlongPathBuilder.CsysType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.PostGraphAlongPathBuilder.Xaxis
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.PostGraphBuilder.DataErrorHandling
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.PostGraphBuilder.EdgeIntegralOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.PostGraphBuilder.EntityType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.PostGraphBuilder.EvalutionErrors
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.PostGraphBuilder.FaceIntegralOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.PostGraphBuilder.GeometryValue
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.PostGraphBuilder.IncompatibleResult
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.PostGraphBuilder.NodalCombination
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.PreTestExciterConfigBuilder.MethodChoiceType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.PreTestExciterConfigBuilder.OffAxisAngleChoiceType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.PreTestExportUnvBuilder.FileUnitsOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.PreTestSensorConfigBuilder.AlgorithmChoiceType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.PreTestSolutionBuilder.ModeConversionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ProjectNodesToCadGeometryBuilder.ListingOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ProjectNodesToCadGeometryBuilder.Operation
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.RadiusType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ReassignElementsBuilder.ElementDimensionOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ReassignElementsBuilder.ElementTypeOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.responsesimulation.CombinationEvaluationOptions.EvaluationMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.responsesimulation.CombinationEvaluationOptions.MultipleExcitationCombinationMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.responsesimulation.CoordinateSystem
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.responsesimulation.CSDExcitation.CorrelationType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.responsesimulation.DataLocation.Beam
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.responsesimulation.DataLocation.Element
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.responsesimulation.DataLocation.Shell
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.responsesimulation.DDAMComponentData.LoadingType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.responsesimulation.DDAMComponentData.ResponseType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.responsesimulation.DDAMExcitation.CoefficientDefinitionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.responsesimulation.DDAMExcitation.LoadingType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.responsesimulation.DDAMExcitation.MountingType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.responsesimulation.DDAMExcitation.ResponseType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.responsesimulation.DDAMExcitation.ShipType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.responsesimulation.DirectionDataComponent
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.responsesimulation.ElementalFunctionEvalBeamLocation
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.responsesimulation.ElementLocation
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.responsesimulation.EvaluationParameters.AnalysisIntegrationMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.responsesimulation.EvaluationResultType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.responsesimulation.Excitation.Component
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.responsesimulation.ExcitationBuilder.ExcitationLocationType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.responsesimulation.FrequencyDefinition.Definition
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.responsesimulation.FrequencyDefinition.InterpolationMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.responsesimulation.InitialConditions.EntryMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.responsesimulation.InitialConditions.Type
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.responsesimulation.InterpolationMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.responsesimulation.NodalAveragingOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.responsesimulation.NodalFunctionEvalBeamLocation
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.responsesimulation.NodalFunctionEvalRequest
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.responsesimulation.NodalFunctionEvalShellLocation
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.responsesimulation.NodalFunctionExcitation.Type
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.responsesimulation.ResponseDomainDefinitionMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.responsesimulation.RmsLcrEvaluationMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.responsesimulation.RSEvent.AnalysisType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.responsesimulation.RSEvent.DdamFormulationType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.responsesimulation.RSEvent.DurationOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.responsesimulation.RSEvent.ResultFileType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.responsesimulation.RSEvent.SpacingType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.responsesimulation.RSEvent.Type
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.responsesimulation.RSEventSolverParameters.DdamCoefficientType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.responsesimulation.SensorCoordinateType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.responsesimulation.SensorResultType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.responsesimulation.SensorType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.responsesimulation.ShellElementEvaluationLocation
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.responsesimulation.StrainGageOrientationPlane
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.responsesimulation.StrainGagePlacementType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.responsesimulation.StrainGageResult
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.responsesimulation.StrainGageShellElementFaceType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.responsesimulation.StrainGageType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.responsesimulation.StrengthStressCriteria
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.responsesimulation.StrengthStressMaterialDefinitionMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.responsesimulation.StrengthStressOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.responsesimulation.TranslationalNodalFunctionExcitationBuilder.RotationAxisType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.responsesimulation.TransmissibilityEvaluationSettingBuilder.MotionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.responsesimulation.VelocityImpactExcitationBuilder.ImpactMethodType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.responsesimulation.VelocityImpactParameters.StartPositionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.Result.BeamEnd
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.Result.Complex
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.Result.Component
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.Result.ComputationType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.Result.CoordinateSystem
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.Result.CoordinateSystemSource
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.Result.DataType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.Result.DeformationScale
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.Result.ElementValueCriterion
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.Result.Filetype
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.Result.GroupContainer
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.Result.LoadcaseValueType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.Result.Location
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.Result.Quantity
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.Result.Section
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.Result.SolutionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.Result.TensorDerivedAbsolute
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ResultMeasure.Operation
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ResultMeasure.SubsetSelection
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ResultProbeBuilder.CombineAcrossEntities
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ResultProbeBuilder.CombineAcrossIterations
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ResultProbeBuilder.EdgeIntegral
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ResultProbeBuilder.ErrorHandling
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ResultProbeBuilder.FaceIntegral
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ResultProbeBuilder.GeometryValue
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ResultProbeBuilder.IterationSelection
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ResultProbeBuilder.IterationType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ResultProbeBuilder.LoadcaseSelection
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ResultProbeBuilder.NodalCombination
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ResultProbeBuilder.SelectionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ResultsCombinationBuilder.EvaluationError
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ResultsCombinationBuilder.IncompatibleResults
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ResultsCombinationBuilder.NoData
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ResultsCombinationBuilder.Output
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ResultsEnvelopeBuilder.IncompatibleResults
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ResultsEnvelopeBuilder.NoData
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ResultsEnvelopeBuilder.Operation
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ResultsEnvelopeBuilder.Output
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ResultsManipulationBuilder.Action
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ResultsManipulationBuilder.ElementValueAtNode
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ResultsManipulationBuilder.OutputResultType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ResultsManipulationBuilder.ResultAppendMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ResultsManipulationBuilder.UnitsSystem
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ResultsReductionBuilder.EvaluationError
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ResultsReductionBuilder.IncompatibleResults
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ResultsReductionBuilder.NoData
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ResultsReductionBuilder.Output
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ResultVariable.NodalCombination
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ShellEADBuilder.MaterialOrientationMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ShellEADBuilder.State
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.SimBCDisplay.Mode
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.SimBcPlotContoursBuilder.PlotType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.SimBcPlotContoursBuilder.ResolveOverlapType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.SimBcXyPlotBuilder.ResolveMultipleMatches
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.SimConditionSeqMgr.FileFormat
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.SimConditionSequence.OutOfRangeBehavior
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.SimLbcFolder.Type
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.SimLoadRecipeMapEntryTargetTypes.TargetTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.SimLoadRecipeMapping.OrientationTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.SimLoadRecipeTypes.DataTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.SimLoadRecipeTypes.LoadConditionHandling
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.SimLoadSet.Type
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.SimResultReference.Type
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.SimSolution.SetupCheckOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.SimSolution.SolveOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.SimSolution.StepPosition
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.SolidPropertyCheckBuilder.UserUnit
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.SolverAppendOption.ImportBehaviorOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.SolverAppendOption.MergeOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.SolverAppendOption.SolutionOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.SpiderElementBuilder.NewMeshType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.SpringEADBuilder.State
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.SuppressHoleBuilder.OptionChoice
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.SuppressHoleBuilder.OptionPointCreate
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.SurfaceCoatBuilder.SelectionMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.SweepBetweenMeshBuilder.Types
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.ThicknessBuilder.EntityType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.TransientResultsReductionBuilder.EvaluationError
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.TransientResultsReductionBuilder.IncompatibleResults
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.TransientResultsReductionBuilder.NoData
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.WeldBuilder.NumberOfPointsOnEdgeType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.WeldBuilder.PointOnEdgeType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.WeldBuilder.WeldLocation
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.XyFunctionDataType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.XyFunctionGeneralType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.XyFunctionLoadType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.XyFunctionMacroType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.XyFunctionMaterialType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.XyFunctionMeasure
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.XyFunctionMotionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.XyFunctionResponseType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.XyFunctionUnit
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.xyplot.AxisDBScale
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.xyplot.AxisType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.xyplot.BarColorOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.xyplot.ComplexOption2D
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.xyplot.ComplexOption3D
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.xyplot.ContouringRange
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.xyplot.DecimalFormat
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.xyplot.Fonttype
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.xyplot.GraphStyle
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.xyplot.GridStyle
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.xyplot.PhaseRangeOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.xyplot.PlateColorOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.xyplot.PlotType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.xyplot.PointMarker
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.xyplot.Preference.NewWindowChoice
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.xyplot.Preference.TargetGraphicWindowOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.xyplot.SurfaceColorOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.xyplot.TextAlignment
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.xyplot.TextOrientation
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.xyplot.TextType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cae.xyplot.UnitSystem
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.CaeObjectType.CaeSubType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.AcrossVoids.MotionTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.ArcOutputTypeCiBuilder.OutputTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.ArcOutputTypeCiBuilder.SplineArcOutputTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.ArcOutputTypeCiBuilder.SplineFitToleranceTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.ArcOutputTypeCiBuilder.SplineLineOutputTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.AreaMillingContainment.CutDirectionTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.AreaMillingNonSteepContainment.AmPocketDirTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.AreaMillingNonSteepContainment.AutoPatCenterTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.AreaMillingNonSteepContainment.PatternDirectionTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.AreaMillingSteepContainment.CutLevelTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.Blade.MaterialSideType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.BladeCutLevels.DepthModeTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.BladeCutLevels.DepthPerCutTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.BladeCutLevels.HubExtensionsTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.BladeCutLevels.IncompleteLevelsTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.BladeCutLevels.RangeDepthTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.BladeCutStart.Type
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.BladeEdge.EdgeDefinitionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.BladeEdge.EdgePointType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.BladeFinishGeom.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.BladeStartPoint.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.BlankIpw.StatusTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.BoundaryMemberSet.ConnectMemberType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.BoundaryMillingMemberSet.FeedUnitTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.BoundarySet.BoundaryTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.BoundarySet.PlaneTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.BoundarySet.ToolPositionTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.BoundarySet.ToolSideTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.BoundaryTurnBlank.Position
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.BoundaryTurnBlank.Type
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.BoundaryTurnMemberCorner.AngleValueType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.BoundaryTurnMemberCorner.CornerType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.BoundaryTurnMemberCorner.FeedType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.BoundaryTurnMemberCorner.ShapeType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.BoundaryTurnMemberFeed.FeedType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.BoundaryTurnMemberFineFinishCorner.AppliedTo
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.BoundaryTurnMemberFineFinishCorner.Cleanup
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.BoundaryTurnMemberFineFinishCorner.ValueType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.BoundaryTurnMemberFineFinishOffset.StatusValue
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.BoundaryTurnMemberFineFinishOffset.TypeValue
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.BoundaryTurnMemberOffset.DistanceTypeMode
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.BoundaryTurnMemberOffset.MethodType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.BoundaryTurnMemberOffset.ModeType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.BoundaryTurnMemberSet.ConcaveCornersTypeValue
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.BoundaryTurnSet.FeedUnitTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.BoundaryTurnVariableStock.PositionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.CAMAttribute.ValueType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.CamInspectionOperationCsysreferencetypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.CamInspectionOperationExtenttypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.CamInspectionOperationFeaturetypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.CamInspectionOperationInneroutertypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.CAMObject.Attr
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.CAMObject.FeedRateUnit
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.CAMObject.Status
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.CAMSession.ObjectSubtype
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.CAMSetup.OutputUnits
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.CAMSetup.Paste
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.CAMSetup.PostprocessSettingsOutputWarning
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.CAMSetup.PostprocessSettingsReviewTool
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.CAMSetup.Ude
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.CAMSetup.View
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.CenterlineDrillTurningBuilder.CycleTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.CenterlineDrillTurningBuilder.DepthReferenceTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.CenterlineDrillTurningBuilder.DepthTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.CenterlineDrillTurningBuilder.DrillingLocationTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.CenterlineDrillTurningBuilder.DwellTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.CenterlineDrillTurningBuilder.FinalRetractTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.CenterlineDrillTurningBuilder.OutputOptionTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.CenterlineDrillTurningBuilder.RemovalIncrementTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.CenterlineDrillTurningBuilder.SpindleStopTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.CenterlineDrillTurningBuilder.StartPositionTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.ChipControl.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.CircularAboutAxisMoveBuilder.AxisType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.CircularAboutAxisMoveBuilder.EndType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.CircularAboutAxisMoveBuilder.ExtensionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.CleanupOutput.GeomTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.CollisionPairBuilder.Filter
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.ConvertFromMCDBuilder.MachineTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.ConvertFromMCDBuilder.PocketLocationTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.CornerControlBuilder.AdjustFeedRateOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.CornerControlBuilder.CornerControlMethods
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.CornerControlBuilder.SlowdownDistanceOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.CornerControlBuilder.SmoothCornersAtOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.CornerControlBuilder.SmoothingOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.CutAngle.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.CutBand.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.Cutcom.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.CutDwell.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.CutLevel.MeasureTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.CutLevel.RangeTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.CutLevel.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.CutLevelPlanar.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.CutParametersActionWhenGougingTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.CutParametersAdjacentBladesTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.CutParametersCleanupControlTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.CutParametersCornerFindingTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.CutParametersCutConnectionTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.CutParametersCutOrderTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.CutParametersExtendAtStartMode
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.CutParametersExtendFloorTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.CutParametersFilletsTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.CutParametersFinishPassesTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.CutParametersIpwTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.CutParametersPatternDirectionTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.CutParametersPlungeDirectionTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.CutParametersProfileCutRegionsTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.CutParametersRegionSequencingTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.CutParametersSimplifyShapesTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.CutParametersToolRunOffTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.CutParametersTraverseOpenPassesTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.CutParametersTrimControlTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.CutPatternBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.CutRegionsBuilder.CutRegionsContainmentTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.CutRegionsBuilder.CutRegionsProgramTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.CutRegionsBuilder.CutRegionsStatusTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.CutSides.SideType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.CutStrategy.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.Cycle.DwellType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.Cycle.MotionOutputTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.CylinderMillingBuilder.BlankDiameterTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.CylinderMillingBuilder.CutPatternTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.CylinderMillingBuilder.DepthPerRevolutionTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.CylinderMillingBuilder.DiameterForHelixTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.CylinderMillingCutParameters.CutDirectionTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.DeltaMoveBuilder.IntentType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.DisplayPath.PathDisplayTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.DisplayTool.ToolDisplayTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.DmAmBuilder.AmCustomStartTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.DmAmBuilder.AmCutPatternTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.DmAmBuilder.AmCutTraversalTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.DmAmBuilder.AmPocketDirTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.DmAmBuilder.AutoPatCenterTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.DmAmBuilder.SteepOptTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.DmBndBuilder.ApplyFilletAtTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.DmBndBuilder.BndCustomStartTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.DmBndBuilder.BndCutPatternTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.DmBndBuilder.BndCutTraversalTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.DmBndBuilder.BndPatternCenterTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.DmBndBuilder.BndPocketDirTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.DmBndBuilder.UsePartTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.DmCmBuilder.ContactPositionRingHeightType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.DmCmBuilder.DmCmCutPointType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.DmCmBuilder.ExtDisType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.DmCmBuilder.ToolAxisGuideVectorType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.DmCmMultiplePassesCiBuilder.OrderType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.DmCmMultiplePassesCiBuilder.WallStepMethodType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.DmCurveBuilder.DpmcvStepTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.DmRadBuilder.RadCutMethodType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.DmRadBuilder.RadStepoverTypeType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.DmRadBuilder.RadTraverseDirType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.DmRotaryFloorFinishBuilder.CutDirection
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.DmRotaryFloorFinishBuilder.CutDirType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.DmRotaryFloorFinishBuilder.DirectionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.DmRotaryFloorFinishBuilder.DmSurfCutAreaType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.DmRotaryFloorFinishBuilder.DmSurfCutStepTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.DmRotaryFloorFinishBuilder.GougeActionTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.DmRotaryFloorFinishBuilder.MatSideType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.DmSpiralBuilder.DmSpiralStepoverTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.DmSurfBuilder.CutDirection
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.DmSurfBuilder.DmSurfCutAreaType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.DmSurfBuilder.DmSurfCutPatternType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.DmSurfBuilder.DmSurfCutStepType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.DmSurfBuilder.DmSurfCutTraversalType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.DmSurfBuilder.GougeActionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.DmSurfBuilder.MatSideType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.DmSurfBuilder.ToolPositionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.DPMItpBuilder.CutTypeOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.DPMItpBuilder.SelectionMethodOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.DPMItpBuilder.StepMethodOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.DPMItpBuilder.StepoverTypeOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.DPMItpBuilder.ToolPositionOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.DrillSurfaceBuilder.SurfaceType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.DrillTapToolBuilder.ToolTapHolderTypeTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.DrillTapToolBuilder.ToolThreadFormMethodTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.DrillThreadMillToolBuilder.ToolFormTypeTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.DriveMode.Type
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.EditSubopCommand.ContainmentTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.EditSubopCommand.PointTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.FacesSequence.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.fbm.FeatureGeometry.SequenceDirectionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.fbm.FeatureGeometry.SequencePatternType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.fbm.FeatureGeometry.SortOrder
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.fbm.ThreadFeatureGeometry.Form
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.fbm.ThreadFeatureGeometry.Rotation
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.fbm.ThreadFeatureGeometry.ThreadDataSource
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.FeatureMillingCutParameters.CuttingDirectionTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.FeatureProcessBuilder.FeatureGroupingType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.FeatureProcessBuilder.FeatureProcessType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.FeatureRecognitionBuilder.GeometrySearch
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.FeatureRecognitionBuilder.RecognitionEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.FeatureTeaching.RuleMatchOptionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.FeedRapidOutputMode
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.FeedRateUnit
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.FeedsBuilder.RecalcuateBasedOn
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.FeedsOptimizationData.FeedRateRangeType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.FinishDwell.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.FirstPlunge.Positions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.FlowBuilder.FlowEditTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.FlowBuilder.FlowOffsetModeType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.FlowCutSteepContainment.CutDirectionTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.FlowCutSteepContainment.CutLevelTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.FlowCutSteepContainment.PatternDirectionTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.FlowCutSteepContainment.SteepCutDirectionTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.FollowPartMoveBuilder.MoveDirectionTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.GeometrySet.LoopsIgnoreTypes
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.GeometrySet.MaterialSideTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.GrooveMillingBuilder.LevelSequencingType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.GrooveToolBuilder.HolderGrooveHands
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.GrooveToolBuilder.HolderHands
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.GrooveToolBuilder.HolderStyles
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.GrooveToolBuilder.InsertShapes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.GroupFeatures.FeaturesToGroupTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.HoleBossGeom.DepthLimitTypes
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.HoleBossGeom.FormPitchTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.HoleBossGeom.FormTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.HoleBossGeom.HoleBossTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.HoleBossGeom.OptimizationTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.HoleBossGeom.RotationTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.HoleBossSet.DepthLimitTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.HoleMakingBuilder.ControlPointTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.HoleMakingBuilder.ModelDepthTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.HoleMakingBuilder.ToolAxisTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InferredDouble.Lock
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.Inheritance
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InitialProfilePlunge.Modes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InPathEventDataBuilder.LocationMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionAlignmentBuilder.AlignmentDirections
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionAlignmentBuilder.AlignTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionAlignmentBuilder.IterDevTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionAlignmentBuilder.RecallStates
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionAlignmentBuilder.RotateTableDirections
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionAlignmentBuilder.RotateTableMethods
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionAlignmentBuilder.RotateTablePcsUpdateOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionAlignmentBuilder.RotationAxisOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionAlignmentBuilder.RotationDirections
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionAlignmentBuilder.RotationMethods
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionAlignmentBuilder.SaveStates
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionAlignmentBuilder.XtMethods
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionAlignmentBuilder.YtMethods
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionAlignmentBuilder.ZtMethods
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionAnalyzeBuilder.DofTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionAnalyzeOutputBuilder.OutputFormatType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionAnalyzeOutputBuilder.ReportingCsysType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionCmmCommandBuilder.AngularUnitsOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionCmmCommandBuilder.CommandTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionCmmCommandBuilder.DeviceTypeOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionCmmCommandBuilder.HomePtMethods
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionCmmCommandBuilder.IdnameMethods
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionCmmCommandBuilder.LinearUnitsOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionCmmCommandBuilder.MoveTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionCmmCommandBuilder.ProgramNameMethods
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionCmmCommandBuilder.PromptVars
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionCmmCommandBuilder.QisvarTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionCmmCommandBuilder.RevMethods
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionCmmCommandBuilder.TemperatureUnitsOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionCmmCommandBuilder.VarScopes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionCmmCommandBuilder.VarTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionDeltaMoveBuilder.IntentType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionLinearMoveToPointBuilder.PointTypeEnums
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionLinkPmiBuilder.CollisionAvoidanceEnumType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionLinkPmiBuilder.CreatePathsOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionLinkPmiBuilder.PathOrderTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionLinkPmiBuilder.PmiScopeTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionLinkPmiBuilder.PointOrderTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionMeasDataBuilder.BoundingType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionMeasDataBuilder.DisplayTransformTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionMeasDataBuilder.InputFormatType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionMeasurePointBuilder.PointTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionMethodBuilder.AxisExtrapolationTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionMethodBuilder.CylinderFittingTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionMethodBuilder.DatumPlaneFittingTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionMethodBuilder.InspectionModes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionMethodBuilder.LimitsOfSizeTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionMethodBuilder.MethodTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionMethodBuilder.OperationTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionMethodBuilder.PointSequenceDirectionTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionMethodBuilder.PointSequenceModeTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionMethodBuilder.PointSequenceStartTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionMethodBuilder.ProfileDispositionTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionMethodBuilder.ReferenceFeatureModeTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionMethodBuilder.ScanCurveModeTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionMethodBuilder.ScanHelixTurnDirectionTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionMethodBuilder.ScanHelixTurnTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionMethodBuilder.ScanModeTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionMethodBuilder.SurfaceProfileTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionMethodBuilder.ToleranceDegreeOfFreedomMode
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionMethodBuilder.TransitionTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionMethodBuilder.UVModeTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionMoveBuilder.DepthMethodTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionMoveBuilder.ProbeTipTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionMoveBuilder.SensorStrategyTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionMoveBuilder.TipAngleTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionMoveBuilder.TipModeTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionOperationTransformBuilder.Angle
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionOperationTransformBuilder.Line
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionOperationTransformBuilder.Motion
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionOperationTransformBuilder.Result
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionOperationTransformBuilder.Transform
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionOutputOperationBuilder.TypeOutput
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionPathBuilder.EntryExitType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionPathBuilder.FirstLastType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionPathBuilder.InspectModeType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionPathBuilder.SequenceType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionProbeTrackingBuilder.TipTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionSensorBuilder.SensorTipLocationTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionSensorBuilder.SensorTipTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionSensorBuilder.SensorTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionSensorMassEditBuilder.SensorSelectModeType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionSensorMassEditBuilder.SensorStrategyType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionToleranceOperationBuilder.AngleFormat
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionToleranceOperationBuilder.ParamExtent
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionToleranceOperationBuilder.ParamPriDatum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionToleranceOperationBuilder.ParamPriDatumModifier
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionToleranceOperationBuilder.ParamSecDatum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionToleranceOperationBuilder.ParamSecDatumModifier
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionToleranceOperationBuilder.ParamSubType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionToleranceOperationBuilder.ParamTerDatum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionToleranceOperationBuilder.ParamTerDatumModifier
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionToleranceOperationBuilder.ParamTolMatModifier
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionToleranceOperationBuilder.ParamTolMatModifierDup
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionToleranceOperationBuilder.ParamTolZoneShape
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionToleranceOperationBuilder.ParamXYZAxis
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionToleranceOperationBuilder.SirVecPCSABS
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionToleranceOperationBuilder.ToleranceSource
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionToleranceOperationBuilder.TolType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionUVGridBuilder.SphereAxisType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.InspectionUVGridBuilder.StartPointType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.IpwAnalysisBuilder.ColorControl
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.IpwContainmentCurvesBuilder.ThicknessModeValue
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.LaserControlPoint.ControlPointTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.LaserControlPoint.HeadOrientTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.LaserControlPoint.ProcessTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.LaserCutoutDefinition.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.LaserHeadOrientation.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.LaserLinearMove.MotionEnds
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.LaserLinearMove.MoveTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.LaserLinearMove.RefTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.LaserPiercingPoint.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.LaserProfileMove.CollisionChecks
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.LaserProfileMove.InterpMethods
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.LaserProfileMove.ShapeTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.LaserProfileMove.ToolSides
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.LeadAngles.ControlTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.LevelToLevel.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.LowerLimit.ActionTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.LowerLimit.ModeTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.MaxCutTraverse.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.MillingToolBuilder.ToolDirectionTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.MillingTrackpointBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.MillOrientGeomBuilder.LowerLimitModes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.MillToolBuilder.CutterSubtypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.MinCutDepth.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.MinCutLength.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.MoveBuilder.Feed
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.MoveBuilder.Motion
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.MultiBladeGeomBuilder.PartAxisOfRotationTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.MultiDepthCut.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.MultiplePassesBuilder.OrderTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.MultiplePassesBuilder.StepMethodTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.MultiRamp.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.NCAssistantBuilder.AnalysisTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.NcmAvoidancePointBuilder.PointStates
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.NcmAvoidancePointBuilder.ToolAxisUsages
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.NcmClearanceBuilder.ClearanceTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.NcmctPartMountingBuilder.LayerTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.NcmctPartMountingBuilder.PositioningTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.NcmHoleMachining.CutcomTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.NcmHoleMachining.FinalTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.NcmHoleMachining.InitialTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.NcmHoleMachining.OverlapTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.NcmHoleMachiningEngRet.EngRetTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.NcmLaserEngage.Type
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.NcmLaserRetract.Type
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.NcmPlanarBuilder.CutcomTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.NcmPlanarBuilder.FinalRet
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.NcmPlanarBuilder.FinalTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.NcmPlanarBuilder.InitialEng
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.NcmPlanarBuilder.InitialTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.NcmPlanarBuilder.PredrillPointsOutputOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.NcmPlanarBuilder.TransferBetweenLevelsTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.NcmPlanarBuilder.TransferBetweenRegionsTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.NcmPlanarBuilder.TransferWithinLevelsTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.NcmPlanarBuilder.TransferWithinLevelsWiths
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.NcmPlanarEngRetBuilder.EngRetTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.NcmPlanarEngRetBuilder.MeasureHeightFrom
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.NcmScBuilder.SmoothingOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.NcmScEngRetBuilder.EngRetTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.NcmScEngRetBuilder.MeasureFromTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.NcmSmoothingBuilder.SmoothToleranceSources
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.NcmSubopBuilder.DefaultRegionStartTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.NcmTransfer.TransferTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.NcmTransferBuilder.AppDepMethodTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.NcmTransferBuilder.AppDepToolAxisOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.NcmTransferBuilder.LongMotionTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.NcmTransferBuilder.TraverseTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.NcmTurnThreadBuilder.LocalReturnMainModes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.NcmTurnThreadBuilder.LocalReturnModes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.NcmTurnThreadBuilder.LocalReturnTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.NcmWedmBuilder.CutcomOffTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.NcmWedmBuilder.CutcomOnTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.NcmWedmBuilder.GlobalStopPointMethodTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.NcmWedmBuilder.GlobalStopPointTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.NcmWedmBuilder.LeadInMethodTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.NcmWedmBuilder.LeadOutMethodTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.NcmWedmBuilder.LeadOutSameAsLeadInTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.NcmWedmBuilder.NonTiltLeadInTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.NormalToToolAxisMoveBuilder.Orientation
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.OffsetDataBuilder.OffsetDirectionMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.OperationBuilder.HoleAxisTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.OperationBuilder.HoleDepthTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.OperationBuilder.OptimizationBasedOnTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.OperationBuilder.OptimizationDistanceTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.OperationBuilder.OptimizationLevelTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.OperationCollection.UseDefaultName
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.OperationDisplayOptionsBuilder.PathDisplayTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.OperationDisplayOptionsBuilder.PathNormalTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.OperationDisplayOptionsBuilder.PatternDisplayTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.OperationDisplayOptionsBuilder.ToolDisplayTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.OperationTransformBuilder.Angle
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.OperationTransformBuilder.Line
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.OperationTransformBuilder.Motion
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.OperationTransformBuilder.Result
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.OperationTransformBuilder.Transform
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.OrientGeomBuilder.CsysPurposeModes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.OrientGeomBuilder.SpecialOutputModes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.OrientGeomBuilder.ToolAxisModes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.ParamBuilder.OptimizationTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.ParamValueIntent
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.PartAxisBuilder.PartAxisOfRotationTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.PitchSetting.OptionTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.PitchSetting.OutputUnitTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.PitchSetting.VarianceTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.PlanarOperationBuilder.AutomaticPartBoundaryMethodTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.PlungeMillingBuilder.TransferMethodTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.PmopToolAxisCiBuilder.ToolAxisTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.Preferences.AnimationAccuracyTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.Preferences.AuxiliaryFloorColorSelectionTypes
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.Preferences.BlankSelectionTypes
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.Preferences.CheckSelectionTypes
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.Preferences.CsysInformationListingTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.Preferences.CutAreaSelectionTypes
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.Preferences.GeometryTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.Preferences.IpwDmrColoringTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.Preferences.PartSelectionTypes
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.Preferences.SelectionTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.Preferences.WallSelectionTypes
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.ProbeCalibrateSphereMoveBuilder.Geometry
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.ProbeCalibrateStylusMoveBuilder.CalibrateStylusType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.ProbeCalibrateStylusMoveBuilder.Depth
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.ProbeCalibrateStylusMoveBuilder.Geometry
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.ProbeControlParametersBuilder.AdjustmentTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.ProbeControlParametersBuilder.PrintType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.ProbeInspectBorebossMoveBuilder.Angle
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.ProbeInspectBorebossMoveBuilder.Cycle
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.ProbeInspectBorebossMoveBuilder.Depth
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.ProbeInspectBorebossMoveBuilder.Geometry
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.ProbeInspectPointMoveBuilder.Direction
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.ProbeInspectSurfacePointMoveBuilder.Direction
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.ProbeInspectSurfacePointMoveBuilder.Measurement
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.ProbeInspectSurfacePointMoveBuilder.ToolAxis
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.ProbeProtectedParametersBuilder.AppMethodTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.ProbeProtectedParametersBuilder.CollisionFlagTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.ProbeProtectedParametersBuilder.DepMethodTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.ProfileStrategy.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.ProjVecCiBuilder.DpmProjTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.RampingMode.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.ReliefCut.DepthUnits
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.ReliefCut.DistanceUnits
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.ReliefCut.Modes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.ReliefPlunge.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.ReliefPlunge.UnitTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.RotaryFinishGeomBuilder.PartAxisOfRotationTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.RotaryPolarMoveBuilder.LockAxisDirection
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.RotaryPolarMoveBuilder.LockPlaneType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.RoughFinishTurningBuilder.CustomMemberDataTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.RoughFinishTurningBuilder.CutRegionsTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.RoughFinishTurningBuilder.ExtendModeTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.RoughFinishTurningBuilder.MaximumAreaModes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.RoughFinishTurningBuilder.MinimumAreaTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.RoughFinishTurningBuilder.MinmaxAreaUnits
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.RoughFinishTurningBuilder.MinmaxSizeModes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.RoughFinishTurningBuilder.MinmaxSizeUnits
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.RoughFinishTurningBuilder.RegionMachiningTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.RoughFinishTurningBuilder.RegionSelectionTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.RoughFinishTurningBuilder.ToleranceOffsetTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.RoughTurningBuilder.CleanupTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.RoughTurningBuilder.LevelDepthModeTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.RoughTurningBuilder.PartOffDepthModeTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.RoughTurningBuilder.PartOffPositionModeTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.RoughTurningBuilder.ReversalModeTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.RoundPointBuilder.Output
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.Sequence.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.SimulationOptionsBuilder.Accuracy
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.SimulationOptionsBuilder.DialogType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.SimulationOptionsBuilder.Enable
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.SimulationOptionsBuilder.IpwEnable
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.SimulationOptionsBuilder.Resolution
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.SimulationOptionsBuilder.Stationary
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.SimulationOptionsBuilder.StockType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.SimulationOptionsBuilder.ToolShapeColl
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.SimulationOptionsBuilder.ToolShapeMR
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.SmallAreaAvoidance.StatusTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.SplitSubopCommand.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.SpringPasses.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.SpunOutlineGeom.CreationTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.SteepContainment.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.StepoverBuilder.ApplyTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.StepoverBuilder.StepoverTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.StopPosition.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.SurfaceContourBuilder.AccessVectorMethodType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.SurfaceContourBuilder.CleanupTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.SurfaceContourBuilder.DriveMethodTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.SurfaceRegions.CreateRegionsTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.SurfaceRegions.FeatureTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.TabPointDataBuilder.TabMethodType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.TabPointDataBuilder.TabThreadMethodType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.TeachmodeLinearMoveBuilder.CurveToolPositionTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.TeachmodeLinearMoveBuilder.EndPositionTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.TeachmodeLinearMoveBuilder.InitialRetractTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.TeachmodeLinearMoveBuilder.MoveTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.TeachmodeProfileMoveBuilder.DriveGeometryTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.TeachmodeProfileMoveBuilder.StartStopPositionMethods
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.ThreadMillingCutParameters.CutDirectionTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.ThreadToolBuilder.InsertShapes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.ThreadTurningBuilder.DepthOptionTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.ThreadTurningBuilder.InfeedLengthTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.ThreadTurningBuilder.InfeedModes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.Tool.Subtypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.Tool.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.ToolAxisAdvanced.RotateAboutType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.ToolAxisAdvanced.Type
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.ToolAxisChange.MethodTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.ToolAxisFixed.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.ToolAxisInterpolate.InterpolateTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.ToolAxisInterpolate.InterpolationMethodTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.ToolAxisTilt.TiltAngleTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.ToolAxisTilt.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.ToolAxisVariable.MaximumLeadAngleTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.ToolAxisVariable.NominalLeadAngleTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.ToolAxisVariable.RulingTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.ToolAxisVariable.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.ToolChangeCiBuilder.HeadDesignationTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.ToolPathDivideBuilder.PathDivideType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.ToolPathEditorBuilder.ClearanceMethodType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.ToolPathEditorBuilder.ConnectionMethodType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.ToolPathEditorBuilder.ExtendMethodType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.ToolPathEditorBuilder.MotionMethodType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.ToolPathEditorBuilder.TrimGeometryType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.ToolPathEditorBuilder.TrimSideType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.ToolPathSplitBuilder.SplitTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.ToolPathSplitBuilder.TransferTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.ToolPathSplitBuilder.TransferUsingMethods
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.ToolPathSplitParametersBuilder.SplitTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.ToolPathSplitParametersBuilder.TransferTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.ToolPathSplitParametersBuilder.TransferUsingMethods
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.ToolPathTiltAvoidance.AxisType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.ToolPathTiltAvoidance.MethodType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.ToolPathTiltMachine.ToolMainMcsTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.ToolPathTiltTilting.AxisType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.ToolPathTiltTilting.ManualTiltTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.ToolPathTiltTilting.ReferenceTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.ToolPathTiltTilting.ToolAxisTiltingDistTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.ToolPathTiltTilting.ToolAxisTiltingRuleTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.ToolPathTiltTilting.ToolAxisTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.ToolPositioningBuilder.ToolPositioning
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.TrimPlane.Content
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.TrimPlane.LimitOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.TrimPoint.AngleOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.TrimPoint.Options
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.TrimPoint.RampAngleOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.TurnAvoidanceApproachBuilder.ApproachPathModes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.TurnAvoidanceClearanceBuilder.AxialPlaneModes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.TurnAvoidanceClearanceBuilder.RadialPlaneModes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.TurnAvoidanceDepartureBuilder.DeparturePathModes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.TurnAvoidanceFromBuilder.FromPointModes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.TurnAvoidanceGohomeBuilder.GohomePointModes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.TurnAvoidanceGohomeBuilder.GohomePointMotionTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.TurnAvoidancePathPointsBuilder.CsTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.TurnAvoidancePathPointsBuilder.CustomFeedrateUnitTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.TurnAvoidancePathPointsBuilder.FeedrateModesTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.TurnAvoidancePathPointsBuilder.MotionTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.TurnAvoidancePathPointsBuilder.PointStatus
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.TurnAvoidanceReturnBuilder.ReturnPointModes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.TurnAvoidanceReturnBuilder.ReturnPointMotionTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.TurnAvoidanceStartBuilder.StartPointModes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.TurnAvoidanceStartBuilder.StartPointMotionTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.TurnAvoidanceStartOfEngageBuilder.StartOfEngageMotionTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.TurnConcaveCornerControl.RadiusOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.TurnConcaveCornerControl.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.TurnCornerControl.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.TurnEngageRetractBuilder.AutoOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.TurnEngageRetractBuilder.ExtendMethods
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.TurnEngageRetractBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.TurnFeatureGeomBuilder.CutRegionSelectionModes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.TurnFeatureGeomBuilder.SurfaceSensitivityModes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.TurnFeatureGeomBuilder.ToleranceOffsetModes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.TurnGrooveCornerControl.CornerTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.TurnGrooveCornerControl.CutSequenceTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.TurnGrooveCornerControl.ReliefPlungeTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.TurningOperationBuilder.MotionOutputOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.TurningOperationBuilder.TrackingPointType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.TurningToolBuilder.HolderShankTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.TurningToolBuilder.InsertPositions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.TurnMoveToPointBuilder.DirectionTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.TurnOrientGeomBuilder.LatheWorkPlaneTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.TurnOrientWcs.XcMappingTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.TurnOrientWcs.YcMappingTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.TurnOverlap.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.TurnProbeClearanceBuilder.AxialPlaneModes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.TurnProbeClearanceBuilder.RadialPlaneModes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.TurnProbeInspectPointMoveBuilder.DirectionTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.TurnRoughFinishLocalReturnBuilder.AdjustmentModeTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.TurnRoughFinishLocalReturnBuilder.DwellUnitTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.TurnRoughFinishLocalReturnBuilder.LimitTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.TurnRoughFinishLocalReturnBuilder.ModeTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.TurnRoughFinishLocalReturnBuilder.ReturnMoveModeTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.TurnRoughFinishTestCut.CutTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.TurnRoughFinishTestCut.DirectionTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.TurnRoughFinishTestCut.FeedInTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.TurnRoughFinishTestCut.FeedOutTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.TurnRoughFinishTestCut.MeasuringPositionTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.TurnRoughFinishTestCut.ReturnMoveTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.TurnRoughFinishTestCut.SecondarySequenceTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.TurnRoughFinishTestCut.SequenceTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.TurnRoughFinishTestCut.StockModeTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.TurnRoughFinishTestCut.StopPositionTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.TurnThreadEngageRetractBuilder.EngageRetractTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.TurnThreadEngageRetractBuilder.MoveTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.TurnToolBuilder.HolderHands
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.TurnToolBuilder.HolderStyles
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.TurnToolBuilder.InsertShapes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.TurnToolBuilder.ReliefAngleTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.TurnToolBuilder.SizeOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.TurnToolBuilder.ThicknessTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.TurnToolProbingBuilder.TrackingPointTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.VectorDistanceMoveBuilder.EndType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.VerticalPosition.OffsetTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.WedmArcOutputTypeCiBuilder.OutputTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.WedmCutOrderBuilder.Type
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.WedmCutParameters.CutDirectionTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.WedmCutParameters.WirePositionTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.WedmGeomBuilder.BackburnPassesTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.WedmGeomBuilder.ConvexCornerTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.WedmGeomBuilder.CornerSmoothingType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.WedmGeomBuilder.SmoothLeadInTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.WedmGeomBuilder.SmoothLeadOutTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.WedmGeomBuilder.StopPointFlagTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.WedmGeomBuilder.StopPointTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.WedmOperationBuilder.BackburnPassesTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.WedmOperationBuilder.ConvexCornerTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.WedmOperationBuilder.CornerSmoothingType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.WedmOperationBuilder.InPathUdeSetTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.WedmOperationBuilder.SmoothLeadInTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.WedmOperationBuilder.SmoothLeadOutTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.WedmOperationBuilder.StopPointFlagTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.WedmOperationBuilder.StopPointTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.WedmPointDefinitionBuilder.PointStates
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.WedmPointDefinitionBuilder.WireAxisStates
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.WedmStatusControlCiBuilder.StatusTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.cam.ZAxisSmoothing.Options
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.Catiav4Creator.SolidBodyOutputOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.Catiav5Creator.ExportFromOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.CGMBuilder.ActionOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.CGMBuilder.Color
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.CGMBuilder.ImageResolutionOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.CGMBuilder.MultipleOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.CGMBuilder.OutputTextOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.CGMBuilder.RelationOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.CGMBuilder.SizeOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.CGMBuilder.UnitsOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.CGMBuilder.Vdc
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.CGMBuilder.Width
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.ConvertToFromReferenceBuilder.OutputType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.CurveParameterType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.DateItemBuilder.DayOfMonth
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.DateItemBuilder.MonthOfYear
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.DatumConstraint.CurveOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.DatumConstraint.Solution
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.DatumConstraint.Type
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.die.AddendumSectionBuilder.SectionLocationType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.die.AddendumSectionBuilder.SectionOrientationType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.die.AddendumSectionBuilder.SectionShapeType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.die.AddendumSectionBuilder.SegmentParameterType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.die.AddendumSectionBuilder.SegmentType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.die.AddendumSectionBuilder.SurfaceBuildType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.die.AddSurfBuilder.Methods
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.die.ClampingSlotBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.die.ClearanceBuilder.ClearanceGeometryTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.die.ClearanceBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.die.CompensateRoughDataBuilder.ApproximationType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.die.CompensateRoughDataBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.die.DieAssistantFlangeProfileType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.die.DieBooleanBuilder.BooleanType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.die.DieBuildStatusOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.die.DieDirectionBuilder.DirectionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.die.DiePlaneBuilder.PlaneType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.die.DirectionOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.die.DrawBeadBuilder.FemaleDepthTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.die.DrawBeadBuilder.FemaleWidthTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.die.DrawBeadBuilder.MaleBeadPositionTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.die.DrawBeadBuilder.OrientationTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.die.DrawBeadBuilder.OrientSectionToDrawTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.die.DrawBeadBuilder.OutputTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.die.DrawBeadBuilder.ProjectionDirectionTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.die.DrawBeadBuilder.TransitionDefinitionTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.die.DrawBeadSegmentBuilder.MaleBeadWidthTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.die.DrawBeadTaperBuilder.TaperTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.die.FillAreaBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.die.FillAreaBuilder.UpperLimitTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.die.FingerClearanceNotchBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.die.FlangeTaskBuilder.CamTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.die.FlangeTaskBuilder.PierceTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.die.FlangeTaskBuilder.SpringbackTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.die.HandlingCoreBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.die.HeelpostBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.die.KeywayBuilder.LocationType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.die.KeywayBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.die.KeywayChildBuilder.LocationOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.die.KeywayChildBuilder.RunoffTypeOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.die.KeywayParentBuilder.RunoffTypeOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.die.MachineReliefBuilder.MainProfileTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.die.MachineReliefBuilder.TrimSheetTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.die.MachineReliefBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.die.OutputCurvesBuilder.SmoothTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.die.OutputCurvesBuilder.TrimCurveCreateTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.die.OutputCurvesBuilder.TrimCurveTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.die.OutputCurvesBuilder.TrimOutputCurveTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.die.PadChildBuilder.ShapeTypeOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.die.PadParentBuilder.ShapeTypeOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.die.PierceHoleChildBuilder.ShapeTypeOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.die.PierceItemBuilder.HoleShapeType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.die.PierceItemBuilder.SizingMethodOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.die.PierceTaskBuilder.CamTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.die.PierceTaskBuilder.CenterPointOptionTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.die.PierceTaskBuilder.PrecisionTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.die.QuickBinderBuilder.EditTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.die.QuickBinderBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.die.QuickBinderWrapBuilder.EditSizeType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.die.QuickBinderWrapBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.die.SpringbackCompensationBuilder.DefinedByType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.die.SpringbackCompensationBuilder.DegreeType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.die.SpringbackCompensationBuilder.ResultSheetType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.die.SteelInsertBuilder.InsertTypeOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.die.SteelInsertSectionBuilder.ExtensionTypeOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.die.SteelInsertSegmentChildBuilder.ExtensionTypeOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.die.SteelInsertSegmentChildBuilder.InsertTypeOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.die.SteelInsertSegmentParentBuilder.ExtensionTypeOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.die.SteelInsertSegmentParentBuilder.InsertTypeOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.die.ThroatChildBuilder.TypeOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.die.ThroatParentBuilder.TypeOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.die.TrimLineDevelopmentBuilder.Convergency
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.die.TrimLineDevelopmentBuilder.MaterialTypeName
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.die.TrimLineDevelopmentBuilder.MeshElement
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.die.TrimLineDevelopmentBuilder.OutputMethodName
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.die.TrimLineDevelopmentBuilder.SmoothingName
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.die.TrimLineDevelopmentBuilder.Surface
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.die.TrimTaskBuilder.CamTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.die.TrimTaskBuilder.MatchCutTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.die.UncutRegionsBuilder.ResultsType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.die.WearPlateLocChildBuilder.PositionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.die.WearPlateLocParentBuilder.PositionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.Background.Type
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.BoundedGridBuilder.LabelReferenceType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.BoundedGridBuilder.ShowLabelType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.CameraBuilder.Aperture
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.CameraBuilder.FovMeasured
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.CameraBuilder.LensAngle
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.CameraBuilder.LensFlare
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.CameraBuilder.StockLens
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.CameraBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.CgfxMattexBuilder.Technique
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.CgfxMattexBuilder.TextureSpace
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.CgfxMattexBuilder.TextureSpaceShader
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.CgfxMattexBuilder.UseCameraDirectionPlane
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.DatumPlaneGridBuilder.GridOrientationType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.DecalBuilder.Anchor
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.DecalBuilder.DecalIllumination
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.DecalBuilder.ImageSize
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.DecalBuilder.Scaling
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.DynamicSectionTypes.ActivePlane
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.DynamicSectionTypes.Axis
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.DynamicSectionTypes.CapColorOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.DynamicSectionTypes.Clip
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.DynamicSectionTypes.CoordinateSystem
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.DynamicSectionTypes.CurveColorOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.DynamicSectionTypes.Type
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.FacetSettingsBuilder.AdvVisToleranceSetting
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.FacetSettingsBuilder.FacetScale
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.FacetSettingsBuilder.FacetToViewRatio
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.FacetSettingsBuilder.FacetUpdate
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.FacetSettingsBuilder.ShadedToleranceSetting
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.GridBuilder.LineStyleType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.GridBuilder.LineWeightType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.ImageBaseBuilder.BasePointChoices
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.ImageBaseBuilder.ImageColorModes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.ImageBaseBuilder.InsertionPoint
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.ImageBaseBuilder.ReferenceDirection
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.ImageBaseBuilder.SizeOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.ImageBaseBuilder.TransparencyColorFrom
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.ImageBasedLighting.ImageBlurType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.ImageBasedLighting.ImagesType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.ImageBasedLighting.ImageUpVectorTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.ImageBasedLighting.ShadowsType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.LayerSettingsBuilder.LayerOptionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.LightBuilder.LightMode
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.LightBuilder.ShadowType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.NonProportionalZoom.MethodType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.PlanarShipGridBuilder.IntersectOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.PlanarShipGridBuilder.LabelDisplayOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.RayTracedStudioBuilder.StationaryDisplayQualityType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.RayTracedStudioEditorBuilder.DynamicRayTracedStudioTilingQualityType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.RayTracedStudioEditorBuilder.RayTracedStudioStaticImageFileFormatType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.RayTracedStudioEditorBuilder.RayTracedStudioStaticImageOrientationType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.RayTracedStudioEditorBuilder.RayTracedStudioStaticImageResolutionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.RayTracedStudioEditorBuilder.RayTracedStudioStaticImageSizeType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.RayTracedStudioEditorBuilder.RayTracedStudioStaticImageUnitsType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.RayTracedStudioEditorBuilder.StaticAntialiasingType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.RayTracedStudioEditorBuilder.StaticRayTracedStudioQualityType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.RayTracedStudioEditorBuilder.StationaryAntialiasingType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.RayTracedStudioEditorBuilder.StationaryRayTracedStudioQualityType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.Reflection.Type
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.SaveImageFileBrowserBuilder.FileFormats
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.SectionCurveSettingsBuilder.ColorOptionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.SelPref.FaceAnalysisViews
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.SelPref.Method
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.SelPref.MouseGesture
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.SelPref.SelectionRadius
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.SelPref.SelectionRule
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.SelPref.ShadedViews
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.Shadows.RealTimeState
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.Shadows.SsaoContrastType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.Shadows.SsaoQualityType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.Stage.OrientationType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.Stage.WallType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.StudioImageCaptureBuilder.AASamplesEnumType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.StudioImageCaptureBuilder.DPIEnumType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.StudioImageCaptureBuilder.DrawingSizeEnumType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.StudioImageCaptureBuilder.OrientEnumType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.StudioImageCaptureBuilder.UnitsEnumType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.TransientText.StandardTextRef
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.TransientText.TextSize
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.TransientText.ViewType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.TrueShadingBuilder.BgdImageType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.TrueShadingBuilder.BgdType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.TrueShadingBuilder.EnvironmentMapType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.TrueShadingBuilder.MaterialType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.TrueShadingBuilder.SHEDLightCollectionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.TrueShadingBuilder.SurfaceOrientType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.TrueStudioBuilder.GlobalMaterial
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.TrueStudioBuilder.RenderMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.Wall.MaterialTextureType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.display.Wall.MaterialType
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.DisplayableObject.ObjectFont
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.DisplayableObject.ObjectWidth
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.DisplayManager.FacetCacheMemoryLevelType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.DisplayManager.LayerSetting
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.DisplayManager.ShowHideScope
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.DisplayManager.ShowHideType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drafting.AnnotateViewsBuilder.ExistingAutomaticAnnotation
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drafting.CutCopyPasteBuilder.TypeOperation
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drafting.CutCopyPasteBuilder.TypePaste
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.AddRemoveBoxViewBuilder.ModeType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.ArrowDirectionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.ArrowStyleType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.BordersAndZonesBuilder.FontEnum
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.BordersAndZonesBuilder.HorizontalCenteringMarkType
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.BordersAndZonesBuilder.VerticalCenteringMarkType
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.BordersAndZonesBuilder.ZoneMethod
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.BordersAndZonesBuilder.ZoneOrigin
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.BrokenViewBuilder.BreakLineStyle
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.BrokenViewBuilder.HorizontalBreakSide
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.BrokenViewBuilder.LineWidth
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.BrokenViewBuilder.TypeBreak
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.BrokenViewBuilder.TypeDirection
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.BrokenViewBuilder.VerticalBreakSide
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.CustomViewSettingsBuilder.Features
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.CustomViewSettingsBuilder.Font
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.CustomViewSettingsBuilder.Interfering
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.CustomViewSettingsBuilder.ThreadStandards
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.CustomViewSettingsBuilder.Width
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.DetailViewBuilder.LabelOnParentType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.DetailViewBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.DraftingCurveInfo.DraftingCurveType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.DraftingViewCollection.ViewCopyAnnotOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.DraftingViewCollection.ViewCopyDetailOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.DraftingViewCollection.ViewUpdateOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.DrawingCompareSettingsBuilder.ChangeSymbolType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.DrawingCompareSettingsBuilder.ComparisonBaseline
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.DrawingCompareSettingsBuilder.FontType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.DrawingCompareSettingsBuilder.WidthType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.DrawingRegionBuilder.ContentToMove
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.DrawingRegionBuilder.RegionContinuation
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.DrawingRegionBuilder.RegionDraftingObjectType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.DrawingRegionBuilder.RegionGrowthDirection
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.DrawingRegionBuilder.RegionHorizontalGrowthDirection
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.DrawingRegionBuilder.RegionVerticalGrowthDirection
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.FontEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.GeneralWorkFlowBuilder.GridSettingsType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.GeneralWorkFlowBuilder.ModelBasedAlwaysStartType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.GeneralWorkFlowBuilder.SettingsOrientationType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.HingeLineBuilder.Hingeline
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.HorizontalCenteringMarkType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.LabelPositionTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.LetterFormatTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.MarkAsTemplateBuilder.ActionTypeEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.MarkAsTemplateBuilder.ItemTypeEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.MarkAsTemplateBuilder.RelationTypeEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.MarkAsTemplateBuilder.TemplateTypeEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.Method
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.MultipleViewPlacementBuilder.Option
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.ReferenceShowTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.ScalePositionTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.ScaleValueFormatTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.SectionInViewBuilder.EditSxtype
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.SectionLineBuilder.Types
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.SectionLineSegmentBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.SectionLineSegmentPointBuilder.SegmentTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.SectionLineStyleBuilder.ArrowheadStyleType
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.SectionLineStyleBuilder.CreateSectionLineType
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.SectionLineStyleBuilder.FontStyle
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.SectionLineStyleBuilder.LabelLocationStyle
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.SectionLineStyleBuilder.StandardStyle
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.SectionLineStyleBuilder.WidthStyle
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.SectionViewBuilder.SectionCutType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.SectionViewBuilder.SectionLineType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.SectionViewBuilder.SectionViewModeType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.ShipbuildingLinesViewStyle.Lines
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.ShipbuildingLinesViewStyle.ShipbuildingLines
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.ShipDraftingViewLinesViewStyle.Lines
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.SketchSectionLineBuilder.SectionLineTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.StandardViewsBuilder.Placement
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.StandardViewsBuilder.Type
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.StandardViewsBuilder.View
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.TrimmingMarkStyleType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.VerticalCenteringMarkType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.View2dOrientBuilder.CustomMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.View2dOrientBuilder.Type
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.ViewBoundaryBuilder.Type
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.ViewBreakBuilder.Viewbreaklinestyle
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.ViewCommonViewLabelBuilder.SecondaryAlignmentType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.ViewCommonViewLabelBuilder.SecondaryIndexingType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.ViewCopyTo3dBuilder.BoundingBoxOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.ViewCopyTo3dBuilder.DistanceFromViewPlaneOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.ViewCopyTo3dBuilder.Option
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.ViewCopyTo3dBuilder.OutputOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.ViewCopyTo3dBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.ViewCreationWizardBuilder.Option
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.ViewCreationWizardBuilder.ResolutionOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.ViewCreationWizardBuilder.ViewBoundaryOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.ViewCreationWizardBuilder.ViewRepresentations
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.ViewDetailLabelBuilder.LabelParentDisplayTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.ViewDetailLabelBuilder.LabelParentTextPlacement
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.ViewLabelTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.ViewOrientationBuilder.Orientation
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.ViewPlacementBuilder.Method
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.ViewPlacementBuilder.Option
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.ViewProjectedArrowSettingsBuilder.DimensionsStyleType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.ViewProjectedArrowSettingsBuilder.DispalyLabelType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.ViewProjectedViewSettingsBuilder.DisplayArrowOnParentViewType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.ViewProjectionBuilder.CurveType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.ViewProjectionBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.ViewProjectionPlaneBuilder.PlaneOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.ViewScaleBuilder.Type
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.ViewSectionLineBuilder.DisplayType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.ViewSectionLineBuilder.LocationType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.ViewSectionLineBuilder.ShowSectionLineType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.ViewSectionLineBuilder.StyleType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.ViewStyleFPCalloutConfigBuilder.OrientationType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.ViewWorkflowBuilder.Display
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.ViewWorkflowBuilder.Handlingbodies
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.ViewWorkflowBuilder.HandlingBodiesType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.ViewWorkflowBuilder.Style
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.drawings.ZoneOrigin
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.DxfdwgCreator.AutoCADRevisionOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.DxfdwgCreator.ExportAsOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.DxfdwgCreator.ExportDataOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.DxfdwgCreator.ExportFacesAsOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.DxfdwgCreator.ExportFromOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.DxfdwgCreator.ExportSplinesAsOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.DxfdwgCreator.OutputFileTypeOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.DxfdwgCreator.OutputToOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.DxfdwgCreator.WidthfactorMethodOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.DxfdwgImporter.AspectRatioOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.DxfdwgImporter.ConvLayoutsAs
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.DxfdwgImporter.ImportBlocksAs
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.DxfdwgImporter.ImportCurvesAs
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.DxfdwgImporter.ImportDimensionsAs
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.DxfdwgImporter.ImportPolylinesAs
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.DxfdwgImporter.ImportToEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.DxfdwgImporter.ProcessingOrderAs
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.DxfdwgImporter.SendLayoutsAs
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.DxfdwgImporter.SendModelDataAs
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.DxfdwgImporter.UnitsEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.Edge.EdgeType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.EffectivityConditionBuilder.EffectivityConditionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.EffectivityConditionBuilder.ToUnitType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.EndCutBlockBuilder.TaperTypeOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.Expression.UnitsOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.ExpressionCollection.ExportMode
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.ExpressionCollection.ImportMode
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.ExpressionCollection.SortType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.ExtrudeLimitDataLimitType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.ExtrudeOffsetDataOffsetType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.ExtrudeTaperDataTaperType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.Face.FaceType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.facet.BestFitAlignBuilder.ConstraintOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.facet.BridgeFacetBodyBuilder.Input
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.facet.BridgeFacetBodyBuilder.SmoothTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.facet.CleanupFacetBodyBuilder.CleanupOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.facet.ConvertFacetBodyBuilder.OutputTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.facet.DecimateFacetBodyBuilder.DecimateMethodType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.facet.ExtrudeFacetBodyBuilder.LimitType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.facet.FacetedBody.FacetedbodyType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.facet.FacetedBodyCollection.Type
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.facet.FacetedEdge.FacetededgeType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.facet.FacetedFace.FacetedfaceType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.facet.FeatureExtractionBuilder.InputActions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.facet.FillHoleBuilder.SmoothTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.facet.FillHoleBuilder.TargetTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.facet.FillHoleBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.facet.MergeFacetBodyBuilder.Input
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.facet.MultiPatchAlignmentBuilder.ResolutionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.facet.SewFacetBodyBuilder.Input
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.facet.SewFacetBodyBuilder.VertexIndex
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.facet.SnipFacetBodyBuilder.BoundaryFacetTreatmentMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.facet.SnipFacetBodyBuilder.DirectionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.facet.SnipFacetBodyBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.facet.SubdivideFacetBodyBuilder.InterpolationMethodType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.facet.SubdivideFacetBodyBuilder.SubdivisionMethodType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.FeatureProcessBuilderStatus.ResultStatus
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.AdmMoveFaceBuilder.MoveOptionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.AeroFlangeBuilder.GuideObjectTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.AeroFlangeBuilder.LimitObjectTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.AeroFlangeBuilder.ThicknessDimensionOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.AeroFlangeBuilder.WidthDimensionOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.AeroFlangeBuilder.WidthMethods
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.AeroRibBuilder.GuideObjectTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.AeroRibBuilder.HeightDimensionOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.AeroRibBuilder.LimitObjectTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.AeroRibBuilder.ThicknessDimensionOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.AestheticFaceBlendBuilder.AlignmentType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.AestheticFaceBlendBuilder.BlendFacesType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.AestheticFaceBlendBuilder.BlendType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.AestheticFaceBlendBuilder.CenterType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.AestheticFaceBlendBuilder.EndTrimObjectType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.AestheticFaceBlendBuilder.RhoType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.AestheticFaceBlendBuilder.SegmentationType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.AestheticFaceBlendBuilder.ShapeType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.AestheticFaceBlendBuilder.StartTrimObjectType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.AnalyzePocketBuilder.AngledWallSolutions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.AnalyzePocketBuilder.ToolTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.AOCSBuilder.Extend
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.AOCSBuilder.ExtendToFace
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.AOCSBuilder.FilletOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.AOCSBuilder.OffsetDirection
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.AOCSBuilder.OffsetDistanceType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.AOCSBuilder.OffsetType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.AOCSBuilder.Trim
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.AssociativeArcBuilder.CenterReference
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.AssociativeArcBuilder.EndOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.AssociativeArcBuilder.EndReference
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.AssociativeArcBuilder.MidOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.AssociativeArcBuilder.MidReference
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.AssociativeArcBuilder.StartOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.AssociativeArcBuilder.StartReference
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.AssociativeArcBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.AssociativeLineBuilder.EndOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.AssociativeLineBuilder.EndReference
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.AssociativeLineBuilder.StartOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.AssociativeLineBuilder.StartReference
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.AssociativityType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.BlendCornerBuilder.ContinuityTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.BlendPocketBuilder.AngledWallSolutions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.BlendPocketBuilder.ToolTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.BridgeCurveBuilder.ConstraintTypes
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.BridgeCurveBuilder.CurveDirectionTypes
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.BridgeCurveBuilder.CurveFitTypes
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.BridgeCurveBuilder.EndObjectTypes
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.BridgeCurveBuilder.MinRadiusTypes
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.BridgeCurveBuilder.SelectedObject
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.BridgeCurveBuilder.ShapeControlTypes
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.BridgeCurveBuilder.SurfaceDirectionTypes
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.BridgeCurveBuilderEx.EndObjectTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.BridgeCurveBuilderEx.RadiusConstraintMethods
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.BridgeCurveBuilderEx.ShapeControlMethods
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.BridgeCurveBuilderEx.StartObjectTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.ChamferBuilder.ChamferOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.ChamferBuilder.OffsetMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.CircularBlendCurveBuilder.CylinderDirectionOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.CircularBlendCurveBuilder.CylinderRadiusOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.CompositeCurveBuilder.JoinMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.CompositeCurveBuilder.PartType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.ConeBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.CopyPasteBuilder.BuilderVersion
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.CopyPasteBuilder.ExpressionTransferOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.CopyPasteBuilder.ParentSelectOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.CopyPasteBuilder.ParentTransferOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.CylinderBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.DatumAxisBuilder.AlternateSolution
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.DatumAxisBuilder.ConstraintType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.DatumAxisBuilder.CurveOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.DatumAxisBuilder.CurveOrientations
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.DatumAxisBuilder.DirectionOrientations
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.DatumAxisBuilder.FixedType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.DatumAxisBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.DatumAxisBuilder.UseArcLength
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.DatumPlaneBuilder.AlternateSolution
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.DatumPlaneBuilder.ConstraintType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.DatumPlaneBuilder.CurveOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.DatumPlaneBuilder.FixedType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.DatumPlaneBuilder.UseArcLength
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.DeleteFaceBuilder.CapOptionValues
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.DeleteFaceBuilder.FaceEdgeBlendPreferenceOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.DeleteFaceBuilder.SelectTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.DeleteFaceBuilder.SetbackOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.DivideCurveBuilder.CornerOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.DivideCurveBuilder.EqualSegmentOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.DivideCurveBuilder.InputArcLengthDirectionFlag
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.DivideCurveBuilder.KnotPointOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.DivideCurveBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.DraftBodyBuilder.MatchingScope
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.DraftBodyBuilder.MatchingType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.DraftBodyBuilder.MatchOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.DraftBodyBuilder.Method
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.DraftBodyBuilder.RepairingPartingEdgeOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.DraftBodyBuilder.RepairOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.DraftBodyBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.DraftBuilder.DraftReferencesMethods
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.DraftBuilder.Method
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.DraftBuilder.Type
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.EdgeBlendBuilder.Conic
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.EdgeBlendBuilder.FaceContinuity
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.EdgeBlendBuilder.OrderOfBlending
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.EdgeBlendBuilder.Overlap
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.EdgeBlendBuilder.Rhotype
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.EdgeBlendBuilder.Section
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.EdgeBlendBuilder.Setback
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.EdgeSymmetryBuilder.MovementDirections
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.EdgeSymmetryBuilder.MovementMethods
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.EdgeSymmetryBuilder.SymmetryPlaneOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.EmbossJoggle.JoggleDirectionMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.EmbossLimit.EndcapMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.EmbossLimit.EndcapSourceOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.EmbossProjection.ProjectionOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.EmbossRegion.ConvexityOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.EmbossSidewall.SidewallMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.EnlargeBuilder.ExtensionTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.ExtensionBuilder.Distance
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.ExtensionBuilder.Extension
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.ExtensionBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.ExtractFaceBuilder.ExtractType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.ExtractFaceBuilder.FaceOptionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.ExtractFaceBuilder.FaceSurfaceType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.ExtractFaceBuilder.FeatureOptionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.ExtractFaceBuilder.ParentPartType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.FaceBlendBuilder.CrossSectionOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.FaceBlendBuilder.DefiningType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.FaceBlendBuilder.OverflowMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.FaceBlendBuilder.RhoMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.FaceBlendBuilder.TrimmingMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.FaceBlendBuilder.Type
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.FaceBlendBuilder.WidthMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.FeatureCollection.ReorderType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.FillHoleBuilder.ContinuityTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.FillHoleBuilder.ShapeControlTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.FitCurveBuilder.FittingParametersOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.FitCurveBuilder.ProjectionDirectionOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.FitCurveBuilder.TargetSourceTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.FitCurveBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.FitSurfaceBuilder.DirectionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.FitSurfaceBuilder.TargetType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.FitSurfaceBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.GeneralConicBuilder.DrawingPlaneOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.GeneralConicBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.GeodesicIntersectBuilder.Type
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.GeodesicProjectBuilder.Type
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.GeomcopyBuilder.AlongPathDistanceOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.GeomcopyBuilder.CsysMirrorOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.GeomcopyBuilder.TransformTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.GeometricConstraintData.AutoConstraintType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.GeometricConstraintData.ParameterDirection
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.GlobalShapingBuilder.BodyMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.GlobalShapingBuilder.DeformationTypeValues
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.GlobalShapingBuilder.DeformBodyType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.GlobalShapingBuilder.DirectionMethodType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.GlobalShapingBuilder.ModifyMethodType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.GlobalShapingBuilder.OffsetMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.GlobalShapingBuilder.PointMethodType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.GlobalShapingBuilder.RadiusType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.GlobalShapingBuilder.RotationMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.GlobalShapingBuilder.RotationMethodType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.GlobalShapingBuilder.TargetCurveOrientationType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.GlobalShapingBuilder.TransitionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.GuidedExtensionBuilderEx.SegmentType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.GuidedExtensionBuilderEx.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.HelixBuilder.LengthMethods
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.HelixBuilder.OrientationOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.HelixBuilder.SizeOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.HelixBuilder.TurnDirections
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.HelixBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.Hole.Subtype
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.HolePackageBuilder.HoleDepthLimitOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.HolePackageBuilder.HoleForms
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.HolePackageBuilder.ThreadLengthOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.HolePackageBuilder.ThreadRotationOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.HolePackageBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.IFormBuilder.BSurfaceExtractionOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.IFormBuilder.GlobalTransitionTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.IFormBuilder.InsertionMethodOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.IFormBuilder.ParameterDirectionOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.IFormBuilder.TransitionTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.IsoparametricCurvesBuilder.DirectionTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.IsoparametricCurvesBuilder.PlacementTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.JoinCurvesBuilder.OutputCurve
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.LabelChamferBuilder.ChamferOrientType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.LabelChamferBuilder.ChamferType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.LawExtensionBuilder.OppositeSideExtensionOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.LawExtensionBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.LawExtensionBuilderEx.MiterOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.LawExtensionBuilderEx.OppositeSideExtensionOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.LawExtensionBuilderEx.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.LinearDimensionBuilder.OrientationOptionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.MapleBuilder.AssociativityEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.MatchEdgeBuilder.EdgeConstraintType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.MatchEdgeBuilder.MatchExact
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.MatchEdgeBuilder.PoleMoveDirection
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.MatchEdgeBuilder.PoleMovementConstraintEnumType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.MatchEdgeBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.MatchedReferenceBuilder.ResolvedStatus
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.MatchedReferenceBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.MeshSurfaceBuilder.ConstraintDirection
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.MeshSurfaceBuilder.ConstraintType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.MeshTransformerBuilder.ContinuityType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.MeshTransformerBuilder.MeshTopologyType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.MeshTransformerBuilder.SmoothingType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.MeshTransformerBuilder.StepCountValue
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.MidSurfaceByFacePairsBuilder.PairingStrategyType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.MidSurfaceByFacePairsBuilder.SurfaceType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.MidSurfaceByFacePairsBuilder.TrimmingOptionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.MirrorBodyBuilder.FeatureOptionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.MirrorBodyBuilder.ParentPart
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.MirrorBuilder.CsysMirrorOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.MirrorCurveBuilder.PlaneOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.MirrorFaceBuilder.MirrorPlaneOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.MoveEdgeBuilder.EndFaceBehaviorType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.MoveFaceBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.MoveObjectBuilder.LayerOptionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.MoveObjectBuilder.MoveObjectResultOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.NSidedSurfaceBuilder.CenterControlAxisType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.NSidedSurfaceBuilder.CenterControlType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.NSidedSurfaceBuilder.FlowDirectionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.NSidedSurfaceBuilder.SurfaceType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.NSidedSurfaceBuilder.UVOrientationType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.OffsetCurveBuilder.TrimOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.OffsetCurveBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.OffsetEdgeBuilder.EndFaceBehaviourType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.OffsetEdgeBuilder.OffsetEdgeMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.OffsetEmbossBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.OffsetSurfaceBuilder.OrientationMethodType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.OffsetSurfaceBuilder.OutputOptionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.OvercrownBuilder.ControlType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.OvercrownBuilder.OperationType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.OvercrownBuilder.OutputType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.OvercrownBuilder.TransitionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.PartGeometryCopyBuilder.Type
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.PartModule.PartLoadOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.PasteFaceBuilder.PasteOptionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.PatchOpeningsBuilder.OutputTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.PatchOpeningsBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.PatternFaceBuilder.PatternTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.PointSetBuilder.CurvePointsType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.PointSetBuilder.FacePointsType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.PointSetBuilder.PatternLimitsType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.PointSetBuilder.SplinePointsType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.PointSetBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.PolylineBuilder.DrawingPlaneOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.PolylineBuilder.MovementMethodType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.PolylineBuilder.WCSOptionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.ProjectCurveBuilder.ArcLengthType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.ProjectCurveBuilder.DirectionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.ProjectCurveBuilder.ProjectionOptionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.RadialDimensionBuilder.ValueOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.RapidSurfaceBuilder.AttachmentTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.RapidSurfaceBuilder.LoopTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.RapidSurfaceBuilder.OperationTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.RasterImage.MaxTextureSize
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.RefitFaceBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.ReplaceFaceBuilder.ReplaceTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.ResizeChamferBuilder.SectionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.ResizeCurveBuilder.ValueType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.RibBuilder.RibCapGeometryOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.RibBuilder.RibDraftOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.RibBuilder.RibThicknessOffsetOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.RibBuilder.RibTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.RPOBuilder.AssociativityType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.ScaleBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.SectionCurveBuilder.PlaneType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.SectionCurveBuilder.SpacingType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.SectionInertiaAnalysisBuilder.CoordSys
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.SectionInertiaAnalysisBuilder.PropertyType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.SectionInertiaAnalysisBuilder.SampleMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.SectionInertiaAnalysisBuilder.SectionAxisNormal
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.SectionInertiaAnalysisBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.SectionSurfaceBuilder.ControlRegionEnum
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.SectionSurfaceBuilder.FlowDirectionEnum
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.SectionSurfaceBuilder.SectionMethodCircularTangentEnum
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.SectionSurfaceBuilder.SectionMethodFilletBridgeEnum
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.SectionSurfaceBuilder.SectionMethodRhoEnum
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.SectionSurfaceBuilder.Types
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.SectionSurfaceBuilder.UDegreeEnum
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.SectionSurfaceBuilderEx.BodyType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.SectionSurfaceBuilderEx.CircularType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.SectionSurfaceBuilderEx.ConicType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.SectionSurfaceBuilderEx.ControlRegionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.SectionSurfaceBuilderEx.CubicType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.SectionSurfaceBuilderEx.SectionMethodCircleTangentType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.SectionSurfaceBuilderEx.SectionMethodFilletBridgeType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.SectionSurfaceBuilderEx.SectionMethodRhoType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.SectionSurfaceBuilderEx.SlopeControlType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.SectionSurfaceBuilderEx.Spine
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.SectionSurfaceBuilderEx.SpineEndFlowType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.SectionSurfaceBuilderEx.SpineStartFlowType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.SectionSurfaceBuilderEx.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.SectionSurfaceBuilderEx.UDegreeType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.SewBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.AeroFlangeBuilder.CompType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.AeroFlangeBuilder.DimType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.AeroFlangeBuilder.DirType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.AeroFlangeBuilder.EndType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.AeroFlangeBuilder.LengthType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.AeroFlangeBuilder.MatType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.AeroJoggleBuilder.SideType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.AeroLighteningCutoutBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.ApplicationContext
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.BeadBuilder.CrossSectionTypeOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.BeadBuilder.EndTypeOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.BeadBuilder.HeightSideOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.BendBuilder.BendDirectionOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.BendBuilder.BendLocationOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.BendBuilder.FixedSideOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.BendOptions.BendReliefTypeOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.BendOptions.CornerReliefTypeOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.BendTaperBuilder.BendTaperInputMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.BendTaperBuilder.BendTaperSides
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.BendTaperBuilder.BendTaperType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.BendTaperBuilder.ChainingType
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.BendTaperBuilder.StartType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.BendTaperBuilder.WebTaperType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.BreakCornerBuilder.TypeOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.BridgeTransitionBuilder.InsetOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.BridgeTransitionBuilder.TypeOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.BridgeTransitionBuilder.WidthDirectionOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.BridgeTransitionBuilder.WidthOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.ClosedCornerBuilder.ClosureTypeOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.ClosedCornerBuilder.OriginTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.ClosedCornerBuilder.TreatmentTypeOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.ClosedCornerBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.ContourFlangeBuilder.SectionSideOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.ContourFlangeBuilder.SweepSideOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.ContourFlangeBuilder.SweepTypeOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.ConvertToSheetmetalBuilder.BendReliefTypeOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.CornerTreatmentBuilder.CornerTreatmentType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.DimpleBuilder.DepthTypeOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.DimpleBuilder.DimensionTypeOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.DimpleBuilder.SectionSideOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.DimpleBuilder.SidewallTypeOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.DrawnCutoutBuilder.DepthTypeOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.DrawnCutoutBuilder.SectionSideOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.DrawnCutoutBuilder.SidewallTypeOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.EditCornerBuilder.BendClosureTypeOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.EditCornerBuilder.CornerReliefTypeOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.EditCornerBuilder.PlateClosureTypeOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.ExportFlatPatternBuilder.DxfRevisionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.ExportFlatPatternBuilder.FileType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.FeatureProperty
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.FlangeBuilder.InsetTypeOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.FlangeBuilder.LengthTypeOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.FlangeBuilder.MatchFaceOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.FlangeBuilder.OffsetTypeOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.FlangeBuilder.WidthTypeOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.FlatSolidBuilder.TransformComponentsOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.FlexibleCableBuilder.BendAngleDirectionOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.FlexibleCableBuilder.PathAdjustmentAngleDirectionOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.FlexibleCableBuilder.SegmentTypeOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.GussetBuilder.PlacementTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.GussetBuilder.Shapes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.GussetBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.GussetBuilder.WidthSides
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.HemFlangeBuilder.BendReliefOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.HemFlangeBuilder.InsetTypeOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.HemFlangeBuilder.TypeOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.JogBuilder.BendLocationOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.JogBuilder.DimensionTypeOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.JogBuilder.DirectionTypeOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.JogBuilder.FixedSideOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.LoftedFlangeBuilder.SectionSideOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.LouverBuilder.DepthSideOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.LouverBuilder.EndTypeOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.LouverBuilder.SectionSideOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.MiterOptions.ClosedCornerTypeOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.MiterOptions.PositionOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.MiterOptions.TypeOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.NormalCutoutBuilder.CutTypeOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.NormalCutoutBuilder.DepthSideOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.NormalCutoutBuilder.DepthTypeOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.NormalCutoutBuilder.SectionSideOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.NormalCutoutBuilder.TypeOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.ResizeBendRadiusBuilder.BendReliefTypeOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.ResizeBendRadiusBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.SheetmetalBendState
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.SheetmetalFaceLayer
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.SheetmetalFaceType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.SheetmetalManagerFlangeWidthOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.SheetmetalManagerTabSweepDir
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.SheetmetalManagerTabType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.SMBoundaryConditionBuilder.ConstraintTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.SolidPunchBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.TabBuilder.SectionSideOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.TabBuilder.ThicknessSideOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.ThreeBendCornerBuilder.OriginTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.sheetmetal.ThreeBendCornerBuilder.TreatmentTypeOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.ShelfBuilder.DepthMethods
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.ShelfBuilder.LengthMethods
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.ShelfBuilder.ReferenceType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.ShelfBuilder.StepMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.ShelfBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.AlongGuideCutBuilder.CreationMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.AlongGuideCutBuilder.WaterStopOffsetMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.BuiltUpManModeBuilder.BuiltUpManModeType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.BulkHeadsBuilder.BulkheadType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.CompareModeBuilder.CompareMode
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.CopyObjectsBuilder.Type
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.CornerCutBuilder.CutOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.CustomBracketBuilder.CreationMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.Cutout2Builder.CreationMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.CuttingSideFacesBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.DeckBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.DeckListItemBuilder.DatumDir
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.DisplaySolidBuilder.DisplayOptionTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.EdgeCutBuilder.ArraySpacing
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.EdgeCutBuilder.VersionID
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.EdgeReinforcementBuilder.EndCutTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.EdgeReinforcementBuilder.OrientationMethods
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.EdgeReinforcementBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.EndCutBuilder.ConnectionTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.EndCutBuilder.DraftTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.EndCutBuilder.LimitTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.EndCutBuilder.SelectionTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.ExamineSteelFeatureBuilderCheck
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.ExamineSteelFeatureBuilderResult
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.ExcessMaterialBuilder.Offset
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.ExcessMaterialBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.ExcessMaterialBuilder.VersionID
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.FeatureParmsBuilder.OrientationAngleRuleTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.FeaturesBatchOperationBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.GenericPlateSystemBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.HullBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.InsertFramesBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.InverseBendingLinesBuilder.MeasureType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.InverseBendingLinesBuilder.MethodType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.InverseBendingLinesBuilder.NeutralMethodType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.InverseBendingLinesBuilder.ReferencePlaneType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.LongitudinalBulkheadBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.ManufacturingPreparationBuilder.AttributeType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.ManufacturingStockBuilder.CheckBoxStatus
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.ManufacturingStockBuilder.LockedStatus
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.ManufacturingStockBuilder.ObjectType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.ManufacturingStockBuilder.StockDataSourceType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.MaterialEstimationBuilder.SelectionMethods
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.OrientationAngleMethodsBuilder.AlignAtTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.OrientationAngleMethodsBuilder.MethodTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.OrientationDefinitionBuilder.MeasureAngleTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.OrientationDefinitionBuilder.PlacementSideTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.OrientationPointMethodsBuilder.MeasureAlongTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.OrientationPointMethodsBuilder.PointMethodTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.OrientationRegionItemBuilder.OrientationMethodTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.PenetrationRequest.CompensationType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.PenetrationRequest.CoutoutType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.PenetrationRequest.DirectionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.PenetrationRequest.PenetrationType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.PenetrationRequest.RequestType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.PenetrationRequestBuilder.RequestDialogType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.PenetrationUtils.Referencetype
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.PenetrationUtils.RequestState
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.PillarBuilder.CapOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.PillarBuilder.CreationMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.PillarBuilder.EndCutTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.PillarBuilder.EndTreatmentTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.PillarBuilder.EndTypeOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.PillarBuilder.StockSectionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.PillarSystemBuilder.StockSectionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.PillarSystemBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.PlateBuilder.BodyTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.PlateBuilder.RegionOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.PlateBuilder.TightnessOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.PlateBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.PlateChamferBuilder.AngleMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.PlateChamferBuilder.OffsetMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.PlateChamferBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.PlateStockBuilder.ThickenOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.PlateStockBuilder.ThicknessSourceOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.PlateSystemBuilder.StiffenerDirectionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.ProfileBuilder.Alignment
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.ProfileBuilder.EndCutOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.ProfileBuilder.OrientationOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.ProfileBuilder.SectionOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.ProfileBuilder.TypeOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.ProfileCutoutBuilder.Orientation
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.ProfileTransitionBuilder.FeatureModeType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.ProfileTransitionBuilder.MisalignedModeType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.RollingLineBuilder.ConstructionMethodTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.RollingLineBuilder.StartEvaluationTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.RollingLineBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.SeamBlockBuilder.SeamType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.SeamBuilder.DefinitionMethods
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.SeamBuilder.StaggerShiftAlongMethods
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.SeamBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.SectionDrawingBuilder.SectionsPerDrawingOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.SectionDrawingBuilder.ViewsPerSheetOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.SectionViewBuilder.DirectionOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.SectionViewBuilder.PlaneTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.SectionViewBuilder.SectionRuleOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.SetModeBuilder.DesMfgMode
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.ShellTemplateBuilder.MarkingTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.ShellTemplateBuilder.PlaneLocationTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.ShellTemplateBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.ShipCoordinatesBuilder.Selection
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.ShipCoordinatesBuilder.XDirectionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.ShipCoordinatesBuilder.YDirectionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.ShipCoordinatesBuilder.ZDirectionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.ShipCutoutBuilder.CreationMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.ShipDesignPreferencesBuilder.AngleRuleTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.ShipDesignPreferencesBuilder.ColorType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.ShipDesignPreferencesBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.ShipEndCutBuilder.CreationMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.ShipFeatureConverter.PartScope
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.ShipIntersectionsBuilder.CreationType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.ShipIntersectionsBuilder.Type
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.ShipnameFieldBuilderType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.ShipnamesBuilderType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.ShipSectionBuilder.Type
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.ShipSectionBuilder.XFilter
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.ShipSectionBuilder.ZFilter
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.SplitProfilePlateBuilder.ProfileType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.SplitProfilePlateBuilder.SplitDirectionOptionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.SplitProfilePlateBuilder.ToolOptionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.SplitStandardPartBuilder.ToolTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.StandardPartFrameworkBuilder.CreationType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.StandardPartFrameworkBuilder.SmartRuleStage
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.StandardPartItemBuilder.Direction
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.SteelDistributionBuilder.SaForm
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.SteelDistributionBuilder.SaMaterial
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.SteelDistributionBuilder.SaName
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.SteelDistributionBuilder.SaSize
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.SteelDistributionBuilder.SaType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.StiffenerBuilder.AttachmentOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.StiffenerBuilder.EdgeReinforcementAlignmentMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.StiffenerBuilder.EdgeReinforcementPlacementMethods
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.StiffenerBuilder.EndCutTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.StiffenerBuilder.KnuckleOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.StiffenerBuilder.MountingMethods
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.StiffenerBuilder.OrientationMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.StiffenerBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.StiffenerBySupportPathBuilder.AlignedTo
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.StiffenerBySupportPathBuilder.Method
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.StiffenerBySupportPathBuilder.Scenario
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.StiffenerLimitBuilder.LimitType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.StiffenerStockBuilder.StockSectionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.StiffenerSystemBuilder.EndCutTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.StiffenerSystemBuilder.MeasureAlongModes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.StiffenerSystemBuilder.MountingMethods
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.StiffenerSystemBuilder.OffsetSpacingModes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.StiffenerSystemBuilder.OrientationMethods
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.StiffenerSystemBuilder.PointMethods
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.StiffenerSystemBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.SubSystemsBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.ThicknessDirectionBuilder.ThicknessDirectionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.TraceLinesBuilder.TraceLineType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.TransitionBuilder.TransitionMethods
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.TransitionBuilder.TransitionTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.TransverseBulkheadBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.UpdateShipLibraryBuilder.ShipLibAssemblyOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.UpdateShipLibraryBuilder.ShipLibOptionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.VentilationHoles2Builder.ArraySpacing
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.VerifyPenetrationBuilder.SelectionDialogType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.WeightAndCGBuilder.SelectionMethods
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.WeldCut2Builder.CreationMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.shipdesign.WeldCutBuilder.CreationMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.SilhouetteFlangeBuilder.OutputSurfaceOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.SilhouetteFlangeBuilder.ReferenceDirectionOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.SilhouetteFlangeBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.SketchConversionStatus.ReasonType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.SketchConversionStatus.Type
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.SmoothSplineBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.SnipSurfaceBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.SphereBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.StepBuilder.DepthMethods
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.StepBuilder.ReferenceBoundaryTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.StepBuilder.StepFaceMethods
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.StepBuilder.StepTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.StepBuilder.StepWallMethods
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.StudioSplineBuilder.CurveOption
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.StudioSplineBuilder.MatchKnotsType
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.StudioSplineBuilder.Method
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.StudioSplineBuilderEx.DrawingPlaneOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.StudioSplineBuilderEx.InputCurveOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.StudioSplineBuilderEx.MatchKnotsTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.StudioSplineBuilderEx.MovementMethodType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.StudioSplineBuilderEx.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.StudioSplineBuilderEx.WCSOptionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.StudioSurfaceBuilder.TransitionOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.StudioXformBuilder.AdvancedMethodType
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.StudioXformBuilder.FeatureType
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.StudioXformBuilder.InsertKnotDirectionType
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.StudioXformBuilder.PlanarizeDirectionType
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.StudioXformBuilder.PlanarizeMethodType
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.StudioXformBuilder.PlanarizePlaneOptionType
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.StudioXformBuilder.RotatingPivotType
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.StudioXformBuilder.RotationDirectionType
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.StudioXformBuilder.ScalingCenterType
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.StudioXformBuilder.ScalingDirectionType
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.StudioXformBuilder.TranslationDirectionType
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.StudioXformBuilder.Types
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.StudioXformBuilderEx.AdvancedMethodOptionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.StudioXformBuilderEx.AdvancedMethodType
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.StudioXformBuilderEx.ExtrationMethodType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.StudioXformBuilderEx.FeatureType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.StudioXformBuilderEx.InsertKnotDirectionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.StudioXformBuilderEx.InsertPoleType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.StudioXformBuilderEx.MovementMethodType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.StudioXformBuilderEx.PlanarizeDirectionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.StudioXformBuilderEx.PlanarizeMethodType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.StudioXformBuilderEx.PlanarizeProjectionPlaneType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.StudioXformBuilderEx.PoleEditType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.StudioXformBuilderEx.PrincipalMovementDirectionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.StudioXformBuilderEx.PrincipalRotatingAxisType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.StudioXformBuilderEx.PrincipalScalingDirectionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.StudioXformBuilderEx.ProportionalPoleControlType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.StudioXformBuilderEx.RotatingAxisType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.StudioXformBuilderEx.RotatingPivotType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.StudioXformBuilderEx.ScalingCenterType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.StudioXformBuilderEx.ScalingDirectionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.StudioXformBuilderEx.SurfaceDirectionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.StudioXformBuilderEx.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.StyledBlendBuilder.StyledBlendRadiusConstraintType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.StyledBlendBuilder.StyledBlendShapeControlType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.StyledBlendBuilder.StyledBlendTrimMethodType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.StyledBlendBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.StyledCornerBuilder.CurveControlTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.StyledCornerBuilder.InteriorCurveTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.StyledCornerBuilder.ShapeControlMethodsTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.StyledCornerBuilder.TrimAndSewMethodTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.StyledCornerBuilder.TrimCurveTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.StyledSweepBuilder.FixedStringOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.StyledSweepBuilder.ScalingMethodOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.StyledSweepBuilder.SectionOrientationOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.StyledSweepBuilder.TransitionOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.StyledSweepBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.subdivision.ExtractCagePolylineBuilder.InputCurveOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.subdivision.StartSymmetricModelingBuilder.MirrorProcedureOption
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.subdivision.SubdivisionExtrudeCageBuilder.DirectionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.subdivision.SubdivisionProjectCageBuilder.ModeOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.subdivision.SubdivisionProjectCageBuilder.TargetTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.subdivision.SubdivisionProjectCageBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.subdivision.SubdivisionSetContinuityBuilder.ContinuityTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.subdivision.SubdivisionSplitFaceBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.subdivision.TransformCageData.FallOffMethodType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.subdivision.TransformCageData.MovementMethodType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.subdivision.TransformCageData.ScalingMethodType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.subdivision.TransformCageData.TransformationMethodType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.subdivision.TransformCageData.WCSOptionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.SweptBuilder.InterpolationOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.SweptBuilder.SectionLocationTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.SweptVolumeBuilder.SweepOrient
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.SymmetricBuilder.PlaneOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.TabNoteCfgBuilder.Refplane
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.TextBuilder.FontStyleOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.TextBuilder.OnFacePlacementMethodOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.TextBuilder.OrientationMethodOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.TextBuilder.ScriptOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.TextBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.ThroughCurveMeshBuilder.BodyPreferenceTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.ThroughCurveMeshBuilder.ConstructionMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.ThroughCurveMeshBuilder.EmphasisType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.ThroughCurvesBuilder.BodyPreferenceTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.ThroughCurvesBuilder.ConstructionMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.ThroughCurvesBuilder.PatchTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.ToolingBoxBuilder.RefCsysType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.ToolingBoxBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.TrimAndExtendBuilder.ArrowSideType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.TrimAndExtendBuilder.OperationType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.TrimBodyBuilder.DirectionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.TrimCurveBuilder.CurveEndOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.TrimCurveBuilder.CurveExtensionTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.TrimCurveBuilder.CurveTrimRegionOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.TrimCurveBuilder.FirstBoundingObjectEndOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.TrimCurveBuilder.FirstBoundingObjectOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.TrimCurveBuilder.InteresectionDirectionOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.TrimCurveBuilder.InteresectionMethods
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.TrimCurveBuilder.SecondBoundingObjectEndOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.TrimCurveBuilder.SecondBoundingObjectOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.TrimExtendBuilder.ArrowSideOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.TrimExtendBuilder.CreationTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.TrimExtendBuilder.ExtensionMethods
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.TubeBuilder.Output
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.UnsewBuilder.UnsewOutput
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.UnsewBuilder.UnsewTool
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.VariableOffsetBuilder.MethodOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.AllAroundVisionBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.AllAroundVisionBuilder.WindowTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.BaseDataLoadingBuilder.LoadingType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.BaseDataLoadingWheelBuilder.DataDefinitionOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.BaseDataPassengerBuilder.SeatDirectionOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.BaseDataWheelBuilder.PositionDefinitionOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.BumperPendulumBuilder.RequirementsControlType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.BumperPendulumBuilder.VisualizationType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.CloseRangeCameraListItemBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.CloseRangeDemoCylinderListItemBuilder.ValidateTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.CloseRangeVisibilityBuilder.EyePointOffsetTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.CloseRangeVisibilityBuilder.EyePointTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.CloseRangeVisibilityBuilder.PathPositionTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.CloseRangeVisibilityBuilder.PositionMethods
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.CloseRangeVisibilityBuilder.PositionPaths
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.CloseRangeVisibilityBuilder.RequirementsControlType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.CrashBarrierBuilder.CrossPositionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.CrashBarrierBuilder.OverlapSideType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.CrashBarrierBuilder.PositionObjectType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.CrashBarrierBuilder.RequirementsControlsControlType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.CrashBarrierBuilder.ShapeType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.CrashBarrierBuilder.SideOverlapSideType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.CrashBarrierBuilder.SidePositionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.DynamicCurbBuilder.MethodType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.DynamicCurbBuilder.PositionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.DynamicCurbBuilder.RequirementsControlType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.DynamicCurbBuilder.VisualizationType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.DynamicCurbBuilder.WheelType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.GroundClearanceBuilder.PositionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.GroundClearanceBuilder.RequirementControls
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.GroundClearanceBuilder.SectionCurveType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.GroundClearanceBuilder.SurfaceLengthType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.GroundClearanceBuilder.VisualizationTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.GroundClearanceBuilder.WheelType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder.MeasurementMethodType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.HeadImpactBuilder.CalculationType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.HeadImpactBuilder.RequirementsControlType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.InnerAngleBuilder.CalculationMethodType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.InnerAngleBuilder.RequirementsControlType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.InnerAngleBuilder.VisualizationType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.InnerAngleBuilder.WheelSizeType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.ManikinBuilder.ClassificationType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.ManikinBuilder.PositionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.ManikinBuilder.SAEPercentileType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.ManikinBuilder.StandardType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.MirrorCertificationBuilder.DriverSideStandardsType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.MirrorCertificationBuilder.EyeFromOptionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.MirrorCertificationBuilder.EyellipsePercentileType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.MirrorCertificationBuilder.EyeMethodType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.MirrorCertificationBuilder.EyePointMethodType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.MirrorCertificationBuilder.InsideStandardsType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.MirrorCertificationBuilder.InstructionFieldPositionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.MirrorCertificationBuilder.InstructionFieldsType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.MirrorCertificationBuilder.LocationType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.MirrorCertificationBuilder.MirrorOrientationType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.MirrorCertificationBuilder.MirrorSurfaceType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.MirrorCertificationBuilder.PassengerSideStandardsType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.MirrorCertificationBuilder.ShowVisionConeType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.OilPanBuilder.PositionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.OilPanBuilder.RequirementsControlType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.OilPanBuilder.VisualizationType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.PedestrianProtectionBuilder.Font
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.PedestrianProtectionBuilder.StandardType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.PedestrianProtectionBuilder.TransformMethods
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.PedestrianProtectionBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.PedestrianProtectionBuilder.Wad
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.PedestrianProtectionBuilder.Width
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.PendulumPlacementBuilder.LocationType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.PendulumPlacementBuilder.PendulumProfileType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.PendulumPlacementBuilder.PositionMethodType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.PendulumPlacementBuilder.SideType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.ReflectionDataBuilder.ResolutionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.SeatBeltAnchorageBuilder.AnchorageLocationTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.SeatBeltAnchorageBuilder.RoutingTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.SeatBeltAnchorageBuilder.SeatPositionTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.SeatBeltAnchorageBuilder.SeatTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.SeatBeltAnchorageBuilder.StandardTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.SlopeBuilder.PositionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.SlopeBuilder.RequirementsControlType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.SlopeBuilder.VisualizationType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.SlopeBuilder.WheelSizeType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.StaticCurbBuilder.PositionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.StaticCurbBuilder.RequirementsControlType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.StaticCurbBuilder.VisualizationType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.TireEnvelopeBuilder.DriverGraphOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.TireEnvelopeBuilder.EnvelopeOffsetMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.TireEnvelopeBuilder.MotionMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.TireEnvelopeBuilder.SpindleFileLocationOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.TireEnvelopeBuilder.SuspensionTemplateType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.TireEnvelopeBuilder.TireDefinitionOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.VehicleCoordinateSystemBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.VisionPlaneBuilder.CustomVisionAngle
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.VisionPlaneBuilder.EnumEyeType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.WheelCoveringBuilder.PositionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.WheelCoveringBuilder.RequirementsControlType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.WheelCoveringBuilder.SurfacePlaneType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.WheelCoveringBuilder.SurfaceSectionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.WheelFixingBuilder.ObjectPositionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.WheelFixingBuilder.PositionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.WheelFixingBuilder.RequirementsControlType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.WheelFixingBuilder.ShapeType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.WheelFixingBuilder.WheelSizeType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.WindshieldDatumBuilder.CustomVisionAngle
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.vehicledesign.WindshieldDatumBuilder.EnumEyeType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.VirtualCurveBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.WaveDatumBuilder.ParentPartType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.WaveLinkBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.WavePointBuilder.ParentPartType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.WrapBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.features.WrapGeometryBuilder.CloseGapType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.fields.DisplayPropertiesBuilder.DepDispTypeEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.fields.DisplayPropertiesBuilder.DepDomColorEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.fields.DisplayPropertiesBuilder.DepLabelValueEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.fields.DisplayPropertiesBuilder.DispResolutionEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.fields.DisplayPropertiesBuilder.IndepDomDispType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.fields.DisplayPropertiesBuilder.LineFontEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.fields.DisplayPropertiesBuilder.LineWidthEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.fields.DisplayPropertiesBuilder.TblPointTypeEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.fields.DisplayPropertiesBuilder.ValuesEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.fields.FieldEvaluator.InterpolationEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.fields.FieldEvaluator.InverseDistanceWeightingEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.fields.FieldEvaluator.LinearLogOptionEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.fields.FieldEvaluator.ValuesOutsideTableInterpolationEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.fields.FieldVariable.Type
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.fields.FieldVariable.ValueType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.fields.SpatialMap.BoundingBoxMapEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.fields.SpatialMap.ParametricPlaneMapEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.fields.SpatialMap.SubtypeEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.fields.SpatialMap.SubtypeMappingEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.fields.SpatialMap.TypeEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.FileNewApplication
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.FileNewTemplateType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.FollowFilletRuleType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.FontCollection.Type
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.formboard.FlipComponentBuilder.AxisType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.formboard.FormboardLayoutBuilder.BranchAngle
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.formboard.FormboardLayoutBuilder.BranchShape
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.formboard.FormboardLayoutBuilder.MainRunType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.formboard.LayoutLengthOptions.RoundingMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.formboard.ObjectAttributeReferenceBuilder.LeaderType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.formboard.OrientBranchBuilder.BranchAngleMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.formboard.UpdateDiscrepancy.ObjectType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.formboard.UpdateDiscrepancy.Type
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.gateway.CopyCutBuilder.Status
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.gateway.ImageCaptureBuilder.CaptureMethodType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.gateway.ImageCaptureBuilder.ImageFormat
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.gateway.ImageCaptureBuilder.ImageSize
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.GenericMeasure.Type
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricanalysis.CurveAnalysisCombsBuilder.DirectionOptionType
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricanalysis.CurveAnalysisDisplay.ShowFlagType
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricanalysis.CurveAnalysisInflectionsBuilder.DirectionOptionType
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricanalysis.CurveAnalysisPeaksBuilder.DirectionOptionType
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricanalysis.CurveAnalysisRecord.DirectionOptionType
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder.CalculationMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder.DisplayStyle
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder.LabelValues
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder.NeedleDirection
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder.ProjectionTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder.XyzTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricanalysis.DeviationChecking.DeviationOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricanalysis.DeviationChecking.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricanalysis.DeviationGaugeBuilder.AdditionalValuesLabelType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricanalysis.DeviationGaugeBuilder.ColorPlotTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricanalysis.DeviationGaugeBuilder.MeasurementMethodType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricanalysis.DeviationGaugeBuilder.MinMaxType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricanalysis.DeviationGaugeBuilder.ReportingPerTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricanalysis.DeviationGaugeBuilder.XyzDirectionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricanalysis.DraftAnalysisBuilder.DrawDirection
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricanalysis.DraftAnalysisBuilder.SelectOutput
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricanalysis.ExamineGeometry.Check
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder.CurvatureTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder.DirectionTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder.DisplayTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder.ScaleTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricanalysis.GapFlushnessBuilder.DisplayOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricanalysis.GapFlushnessBuilder.EvaluationModes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricanalysis.GapFlushnessBuilder.EvaluationTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricanalysis.GapFlushnessBuilder.PanelTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricanalysis.GapFlushnessBuilder.SectionAlignments
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricanalysis.GapFlushnessBuilder.SectionCurveOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricanalysis.GeometricProperties.Entity
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricanalysis.GeometricProperties.OutputType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricanalysis.GeometricProperties.Status
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricanalysis.HighlightLinesAnalysisBuilder.DisplayMethods
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricanalysis.HighlightLinesAnalysisBuilder.LightPlacements
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricanalysis.HighlightLinesAnalysisBuilder.LightPlaneOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricanalysis.HighlightLinesAnalysisBuilder.Resolutions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricanalysis.HighlightLinesAnalysisBuilder.Types
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricanalysis.HighlightLinesAnalysisBuilder.Types2
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricanalysis.sectionanalysis.RadialBuilder.RotationAxisType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricanalysis.sectionanalysis.SectionAnalysisBuilder.CalculationMethodType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricanalysis.sectionanalysis.SectionAnalysisBuilder.NeedleDirectionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricanalysis.sectionanalysis.SectionAnalysisBuilder.OutputType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricanalysis.sectionanalysis.SectionAnalysisBuilder.ScalingMethodType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricanalysis.sectionanalysis.SectionAnalysisBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricanalysis.sectionanalysis.SectionAnalysisExBuilder.AlignmentType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricanalysis.sectionanalysis.SectionAnalysisExBuilder.CalculationMethodType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricanalysis.sectionanalysis.SectionAnalysisExBuilder.NeedleDirectionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricanalysis.sectionanalysis.SectionAnalysisExBuilder.OutputType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricanalysis.sectionanalysis.SectionAnalysisExBuilder.PlacementType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricanalysis.sectionanalysis.SectionAnalysisExBuilder.ScalingMethodType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricanalysis.sectionanalysis.SectionPlaneBuilder.PlaneType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricanalysis.SimpleInterference.FaceInterferenceMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricanalysis.SimpleInterference.InterferenceMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricanalysis.SimpleInterference.Result
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricanalysis.SolidDensity.UnitsType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricanalysis.SurfaceAnalysisDisplay.ShowFlagType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricanalysis.SurfaceContinuityAnalysisBuilder.CurvatureType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricanalysis.SurfaceContinuityAnalysisBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricanalysis.SurfaceIntersectionBuilder.CalculationTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricanalysis.SurfaceIntersectionBuilder.DirectionTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricanalysis.SurfaceIntersectionBuilder.LabelValues
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricanalysis.SurfaceIntersectionBuilder.NormalTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricanalysis.SurfaceIntersectionBuilder.ProjectionTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricanalysis.SurfaceIntersectionBuilder.ScalingTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricanalysis.SurfaceIntersectionBuilder.XyzTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.AlignmentMethodBuilder.AlignFillerSurfaceType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.AlignmentMethodBuilder.Type
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.AlongPathPattern.PathOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.AlongPathPattern.YDirectionOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.AlongSpineBuilder.RetainSpineOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.AngularPatternSpacing.UsePitchOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.BlendSetbackBuilder.Directions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.BlendStopshortBuilder.Choices
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.BooleanOperation.BooleanType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.BooleanRegionSelect.KeepRemoveOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.BooleanRegionSelect.SelectOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.BooleanToolBuilder.BooleanToolType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.BoundingObjectBuilder.Method
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.BridgeCurveConnectivity.CurveDirectionOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.BridgeCurveConnectivity.FaceDirectionOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.CircularFrameBuilder.Subtypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.CircularPattern.StaggerOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.CombOptionsBuilder.AnalysisTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.CombOptionsBuilder.LabelTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.ConicCrossSection.DefineMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.ConicCrossSection.DepthMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.ConicCrossSection.OffsetMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.ConicCrossSection.RhoMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.ConicCrossSection.ShapeSkewMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.Continuity.ContinuityTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.CurveExtendData.LimitOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.CurveExtensionBuilder.ExtensionOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.CurveFitData.Join
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.CurveFitData.Method
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.CurveFitJoin.JoinMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.CurveFitOptions.FitMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.CurveOptions.InputCurve
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.CurveRangeBuilder.AnchorPositionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.CurveShapingBuilder.InsertionMethodOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.CurveShapingBuilder.MovementMethodType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.CurveShapingBuilder.WCSOptionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.EndHoleData.FormOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.EndHoleData.HoleDepthLimitOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.EndHoleData.ThreadLengthOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.EndHoleData.ThreadRotationOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.EntityUsageInfo.Status
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.Extend.ExtendType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.ExtensionMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.ExtensionSide
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.FacePlaneSelectionBuilder.TrimObjectType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.FeatureOptions.BodyStyle
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.FrameOnPathBuilder.AnchorLocationType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.FtmFixedCurvesBuilder.FixedCurvesContinuityType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.FtmTransformCurvesBuilder.TransformCurvesContinuityType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.GeneralPattern.FromLocationOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.GeometryLocationData.EntityTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.HelixPattern.DirectionTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.HelixPattern.SizeOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.LawBuilder.RetainLawCurveOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.LawBuilder.Type
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.MatchSurfaceBuilder.MatchConstaint
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.MirrorPattern.PlaneOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.ModlMotion.Delta
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.ModlMotion.Options
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.MovePoleBuilder.MoveMethodType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.MovePoleBuilder.WCSDirectionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.MultiDraft.AngleOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.OnPathDimensionBuilder.UpdateReason
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.OrientationMethodBuilder.OrientationOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.OrientXpressBuilder.Axis
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.OrientXpressBuilder.Plane
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.OrientXpressBuilder.Reference
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.ParentEquivalencyMap.Status
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.ParentEquivalencyMap.Type
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.PartModuleInputBuilder.ModifiableGeometryOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.PatternClocking.ClockingType
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.PatternClockingBuilder.ClockingType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.PatternDefinition.PatternEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.PatternFill.PatternFillOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.PatternIncrementItem.OperationEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.PatternOrientation.Enum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.PatternOrientation.ProjDirEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.PatternSpacing.SpacingType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.PointSetAlignmentBuilder.ConstraintOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.PointsFromFileBuilder.Options
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.PolygonPattern.SizeOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.ProjectionOptions.DirectionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.QuadrilateralFrameBuilder.Subtypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.RadiusMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.Rebuild.DegreeTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.Rebuild.RebuildTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.RectangularFrameBuilder.AnchorLocationType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.RectangularPattern.SimplifiedLayoutTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.RectangularPattern.StaggerOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.ReduceSurfaceRadiusBuilder.FaceSelectionSpecification
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.ReduceSurfaceRadiusBuilder.ReducedFaceTypeSpecification
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.ReduceSurfaceRadiusBuilder.ReduceValueTypeSpecification
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.RefitControlBuilder.RefitControlDirection
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.RefitControlBuilder.RefitControlMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.RegionTracker.ExtremityType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.ScalingMethodBuilder.BlendingFunctionTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.ScalingMethodBuilder.ScalingOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.SelectDividingObjectBuilder.IsoparametricDirectionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.SelectDividingObjectBuilder.ToolType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.ShapeFrameBuilder.AnchorAttachmentType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.SimpleDraft.SimpleDraftType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.SmartVolumeProfileBuilder.CloseProfileRuleType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.SpineDefinitionBuilder.MethodOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.SpinePointData.ParameterType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.SpiralPattern.OrientType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.SpiralPattern.SpiralDefineSize
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.SplineExtensionBuilder.ExtensionOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.StartHoleData.HoleForms
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.StepOptionBehavior.StepOptionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.StyledSweepReferenceMethodBuilder.ReferenceOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.SupportPlaneData.LockPlaneStatus
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.SurfaceRangeBuilder.AnchorPositionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.TransformerData.ObjectType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.TransitionCurveBuilder.TangentDirections
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.TriangularFrameBuilder.Subtypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.geometricutilities.Type
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.HumanData.AdvancedScalingType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.HumanData.DatabaseType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.HumanData.EditDisplayBodyParts
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.HumanData.GenderType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.HumanData.HandFootType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.HumanData.HandGoalType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.HumanData.InverseKinematicsBalanceType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.HumanData.InverseKinematicsBodyParts
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.HumanData.InverseKinematicsHeadEyeType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.HumanData.InverseKinematicsInitJoint
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.HumanData.InverseKinematicsType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.HumanData.JointType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.HumanData.ReferencePointType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.HumanData.SegmentScalingType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.HumanData.SideType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.HumanData.StatureType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.HumanData.StatureUnitType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.HumanData.WeightType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.HumanData.WeightUnitType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.HumanHandShapeData.HandOpt
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.HumanPosturePredictionBuilder.CushionFirmnessType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.HumanPosturePredictionBuilder.OccupantType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.HumanPosturePredictionBuilder.PredictionMethodType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.HumanPosturePredictionBuilder.SeatType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.HumanPosturePredictionBuilder.SteeringWheelPedalType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.HumanPosturePredictionBuilder.TransmissionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.HumanPosturePredictionBuilder.VehicleType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.HumanReachZone.MethodType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.IgesCreator.CrossHatchMapEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.IgesCreator.CsysrefEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.IgesCreator.ExportFromOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.IgesCreator.MapRevolvedFacesOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.IgesImporter.CopiousDataEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.IgesImporter.ImportToEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.InferSnapType.SnapType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.Information.DisplayFeatureType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.InterpartExpressionsBuilder.NamingRules
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.issue.IssueAttachment.Type
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.issue.IssueFolder.Type
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.issue.IssueManager.Mode
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.issue.IssueManager.State
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.issue.IssueProperty.Type
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.issue.SnapshotSubsetBuilder.ContextType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.JtCreator.ChordalValue
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.JtCreator.FileStructure
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.JtCreator.FileWrite
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.JtCreator.PmiOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.JtCreator.RefsetOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.JtCreator.TessellationOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.layer.Constants
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.layer.State
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.layout2d.Layout2dComponentMemberType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.layout2d.Layout2dDefinitionLocation
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.layout2d.Layout2dDefinitionStatus
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.LayoutDefinition.ArrangementType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.Light.SceneType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.LightType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.LineFontBuilder.LineFontType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.LineWidthOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.LinkedMirrorPartBuilder.MirrorCsysOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.LinkedMirrorPartBuilder.MirrorPartTypeOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.ListCreator.ResolutionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.ListCreator.TessellationOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.ListingWindow.DeviceType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.LoadOptions.BookmarkComponents
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.LoadOptions.BookmarkRefsets
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.LoadOptions.LoadComponents
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.LoadOptions.LoadMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.LoadOptions.ManagedModeLoadMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.LoadOptions.Parent
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.LoadOptions.UpdateSubsetOnLoad
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.markup.Icon.Size
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.markup.Polyline.LineOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.MassPropertiesBuilder.UpdateOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.MaterialUtilities.StressStrainData
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.MeasureAngleBuilder.AngleType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.MeasureAngleBuilder.ObjectType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.MeasureAngleBuilder.OrientationType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.MeasureAngleBuilder.ProjectionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.MeasureBodies.ActiveValue
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.MeasureBodies.AnalysisUnit
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.MeasureBuilder.AnnotationType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.MeasureBuilder.RequirementType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.MeasureDistanceBuilder.DistanceType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.MeasureDistanceBuilder.MeasureType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.MeasureFaces.ActiveValue
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.MeasureManager.EndpointType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.MeasureManager.ExtremeType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.MeasureManager.MeasureType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.MeasureManager.ProjectionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.MeasureManager.RadialMeasureType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.Measurement.DeviationReportType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.mechatronics.BreakingConstraintBuilder.BreakingModeType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.mechatronics.CamBuilder.AxisJointType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.mechatronics.CamProfileBuilder.MasterValueUnit
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.mechatronics.CamProfileBuilder.ProfileCyclicType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.mechatronics.CamProfileBuilder.SlaveValueUnit
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.mechatronics.CollisionBodyBuilder.CollisionShapeTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.mechatronics.CollisionBodyBuilder.ShapePropertyTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.mechatronics.CollisionSensorBuilder.CollisionShapeTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.mechatronics.CollisionSensorBuilder.ShapePropertiesOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.mechatronics.ComparisonResult.Category
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.mechatronics.ComparisonResultContext.ResolveConflictAction
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.mechatronics.ComparisonResultElectricalPart.Status
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.mechatronics.DisplayChangerBuilder.ExecuteModes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.mechatronics.ExternalConnectionElementBuilder.ConditionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.mechatronics.ExternalConnectionElementBuilder.DataType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.mechatronics.ExternalConnectionElementBuilder.StreamType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.mechatronics.GanttOperationBuilder.OperationType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.mechatronics.GanttOperationBuilder.SimpleOperationType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.mechatronics.GanttOperationParameterBuilder.OperatorOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.mechatronics.GearBuilder.AxisJointType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.mechatronics.GraphControlBuilder.EndAction
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.mechatronics.GraphControlBuilder.MasterJointType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.mechatronics.GraphControlBuilder.MasterValueUnit
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.mechatronics.GraphControlBuilder.SlaveValueUnit
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.mechatronics.MechatronicsSession.SimulationAction
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.mechatronics.MotionProfileBuilder.MasterValueUnit
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.mechatronics.MotionProfileBuilder.ProfileCyclicType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.mechatronics.MotionProfileBuilder.SlaveValueUnit
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.mechatronics.ObjectSinkBuilder.DeleteSourceType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.mechatronics.ObjectSourceBuilder.CopyEventTriggerOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.mechatronics.ObjectTransformerBuilder.TransformSourceType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.mechatronics.OPCClientBuilder.ServerOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.mechatronics.OPCClientBuilder.TagAccess
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.mechatronics.OPCClientBuilder.TagDataType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.mechatronics.ParameterStockBuilder.Assignment
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.mechatronics.ParameterStockBuilder.DataType
-
Returns an array that contains the values for this enum.
- values - Variable in class nxopen.mechatronics.ParameterStockBuilder.ListParameterData
-
- values() - Static method in class nxopen.mechatronics.PathConstraintFrameBuilder.CurveTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.mechatronics.PathConstraintJointBuilder.PathTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.mechatronics.PositionControlBuilder.AngularPathOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.mechatronics.PositionControlBuilder.Axis
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.mechatronics.PreferencesBuilder.MasterTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.mechatronics.ProxyObjectBuilder.Type
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.mechatronics.ProxyOverrideObjectBuilder.AttrBoolValue
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.mechatronics.ProxyOverrideObjectBuilder.AttrType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.mechatronics.ReadWriteDeviceBuilder.DeviceType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.mechatronics.ReadWriteDeviceBuilder.ExecuteMode
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.mechatronics.RigidBodyBuilder.MassPropertiesOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.mechatronics.SignalAdapterBuilder.DataPortType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.mechatronics.SignalAdapterBuilder.DataType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.mechatronics.SpeedControlBuilder.AxisJointType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.mechatronics.SpeedPositionControlDirectiontype
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.mechatronics.SpringDamperBuilder.AxisJointType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.mechatronics.SystemObject.RelationType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.mechatronics.SystemObject.ReorderType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.mechatronics.SystemRoot.Type
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.mechatronics.TransportSurfaceBuilder.MoveType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.mechatronics.VirtualAxisBuilder.VirtualAxisType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.menubar.ContextMenuEntry.Type
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.menubar.MenuBarManager.CallbackStatus
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.menubar.MenuButton.SensitivityStatus
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.menubar.MenuButton.Toggle
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.menubar.MenuButton.Type
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.MeshParameterData.FeatureType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.MeshParameterData.Type
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.MeshProfileString.InsertOrder
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.MeshProfileString.SelectedPoint
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.MeshProfileString.Type
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.ModelingView.SectionCap
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.ModelingView.SectionPlane
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.ModelingViewHighQualityImage.DisplayTechniqueType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.ModelingViewHighQualityImage.FormatType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.ModelingViewHighQualityImage.ShadeMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.motion.ActiveView
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.motion.BodyContactAdams.CoulombFriction
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.motion.BodyContactAdams.ForceModel
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.motion.BodyContactLms.CoulombFriction
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.motion.BodyContactRecurdyn.ContactType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.motion.BodyContactRecurdyn.CoulombFriction
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.motion.BodyContactRecurdyn.ForceModel
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.motion.BodyContactRecurdyn.SurfaceType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.motion.BushingBuilder.BushingTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.motion.BushingCylindricalCoefficientTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.motion.BushingDefine.OrientationTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.motion.BushingGeneralCoefficientMoveTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.motion.BushingGeneralCoefficientTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.motion.ConnectorBuilder.AttachmentType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.motion.ConnectorCoefficientTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.motion.CurveContactBuilder.GeometryMaterialSide
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.motion.CurveParameterizedTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.motion.DriverOperation.IntegrationType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.motion.DriverOperation.Type
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.motion.FlexBodyBuilder.Positioning
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.motion.FlexBodyBuilder.SourceType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.motion.ForceValueTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.motion.GcouplerMovementTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.motion.GeneralCouplerBuilder.AttachmentType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.motion.GraphBuilder.ComponentChoices
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.motion.GraphBuilder.CsysChoices
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.motion.GraphBuilder.PlotStyleChoices
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.motion.GraphBuilder.RequestChoices
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.motion.GraphBuilder.XAxisTypeChoices
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.motion.JointDefine.OrientationType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.motion.JointDefine.Type
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.motion.JointFrictionAdams.FrictionEffect
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.motion.JointFrictionAdams.FrictionOverlapDelta
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.motion.JointFrictionAdams.FrictionYokeType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.motion.JointFrictionRecurDyn.FrictionEffect
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.motion.JointFrictionRecurDyn.FrictionOverlapDelta
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.motion.JointFrictionRecurDyn.FrictionYokeType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.motion.LinkInitialVelocity.AngularVelocityType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.motion.LinkMassProperty.MassPropertyType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.motion.LmsSolverProperty.DynamicAccelerationMethods
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.motion.LmsSolverProperty.DynamicInitialVelocityMethods
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.motion.LmsSolverProperty.StaticJacobianTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.motion.Marker.MarkerType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.motion.MotionEnvironment.Analysis
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.motion.MotionEnvironment.JointWizardStatus
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.motion.MotionEnvironment.Solver
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.motion.MotionObject.GroupType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.motion.MotionSensorBuilder.Component
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.motion.MotionSensorBuilder.Reference
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.motion.MotionSensorBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.motion.MotionSolutionBuilder.AnalysisTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.motion.MotionSolutionBuilder.SolutionTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.motion.PackagingInterferenceBuilder.Action
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.motion.PackagingInterferenceBuilder.Frame
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.motion.PackagingInterferenceBuilder.Mode
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.motion.PackagingMeasureBuilder.MeasureCondition
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.motion.PackagingMeasureBuilder.MeasureType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.motion.PackagingTraceBuilder.Frame
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.motion.PlantOutputBuilder.Poutype
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.motion.PlayMode
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.motion.PMDCMotorBuilder.Type
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.motion.RecurdynSolverProperty.StaticIntegratorTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.motion.SignalChartBuilder.Type
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.motion.SignalChartListItem.Condition
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.motion.SignalChartListItem.Timer
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.motion.VobjectCsysType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.MovieSettingsBuilder.CaptureAreaChoices
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.MovieSettingsBuilder.PlaybackSpeedChoices
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.NXMessageBox.DialogType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.NXObject.AttributeType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.NXObject.DateAndTimeFormat
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.NXTo2dCreator.ExportDataOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.NXTo2dCreator.ExportFromOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.NXTo2dCreator.OutputAsOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.NXTo2dCreator.OutputToOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.ObjectList.DeleteOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.ObjectSelector.Scope
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.Offset.OnFaceOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.optimization.DesignStudyBuilder.DesignStudyAttributeType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.optimization.DesignStudyBuilder.DesignStudyConstraintLimitType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.optimization.DesignStudyBuilder.DesignStudyDistributeType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.optimization.OptimizationBuilder.OptimizationAlgorithmType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.optimization.OptimizationBuilder.OptimizationAttributeType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.optimization.OptimizationBuilder.OptimizationConstraintLimitType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.optimization.OptimizationBuilder.OptimizationConvergenceSpeedType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.optimization.OptimizationBuilder.OptimizationTargetType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.options.LevelLockedByDefault
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.options.LevelType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.options.OptionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.Part.PartFamilyAttrType
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.Part.Relations
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.Part.Units
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.PartCleanup.CleanupParts
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.PartCleanup.DeleteGroups
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.PartCleanup.ResetComponentDisplayAction
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.PartCollection.RefsetOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.PartCollection.SdpsStatus
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.PartCollection.WorkComponentOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.partfamily.FamilyAttribute.AttrType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.PartImporter.DestinationCoordinateSystemSpecificationType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.PartImporter.LayerOptionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.PartSaveOptions.PatternData
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.PasteSpecialBuilder.DestinationOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.PasteSpecialBuilder.LayerOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.pdm.CaeCloneManager.CloneOption
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.pdm.ConfigurationContextBuilder.ConfigContextMode
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.pdm.ConfigurationContextBuilder.ConfigContextType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.pdm.ConfigurationContextBuilder.ConfigurationDetail
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.pdm.DesignElementRevision.DesignElementCategory
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.pdm.ModelElementRevision.PositioningStatus
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.pdm.PartBuilder.Operation
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.pdm.PartFromPartBuilder.FileSaveAs
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.pdm.PartOperationBuilder.DependentFileSaveAs
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.pdm.PartOperationBuilder.NonMasterSaveAs
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.pdm.PartOperationBuilder.OperationType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.pdm.PartOperationCopyBuilder.CopyDependentFiles
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.pdm.PartOperationCopyBuilder.CopyNonMasterParts
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.pdm.PartOperationCopyBuilder.OperationSubType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.pdm.PartOperationCreateBuilder.OperationSubType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.pdm.PdmSoaqueryNxmgrfielddatatype
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.Persistence
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.PhysicalMaterial.AssignWarning
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.PhysicalMaterial.Category
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.PhysicalMaterial.Type
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.PlaneNormalOrientation
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.PlaneTypes.AlternateType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.PlaneTypes.FrenetSubtype
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.PlaneTypes.MethodType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.PlotBuilder.ImageResolutionOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.PlotBuilder.JustificationOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.PlotBuilder.PlotTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.PlotBuilder.RotationOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.PlotBuilder.UnitsOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.PlotBuilder.XdisplayOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.PlotBuilder.YdisplayOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.PlotColorsWidthsBuilder.Color
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.PlotColorsWidthsBuilder.Width
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.PointCollection.AlongCurveOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.PointCollection.PointOnCurveLocationOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.positioning.ComponentConstraint.DirectionToFixed
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.positioning.ComponentNetwork.ArrangementsMode
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.positioning.Constraint.Alignment
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.positioning.Constraint.SolverStatus
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.positioning.Constraint.SplineType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.positioning.Constraint.Type
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.positioning.ConstraintReference.ConstraintOrder
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.positioning.ConstraintReference.GeometryType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.positioning.ConstraintReference.HalfSpace
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.positioning.MatingConverter.PartContext
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.positioning.Network.ObjectStatus
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.PositioningDimension.Subtype
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.AngleFormat
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.DecimalPointCharacter
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.DetailBoundaryOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.Font
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.GdtOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.GeneralDisplayIdOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.GeneralExtractedEdgesOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.GeneralToleranceOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.GeneralViewQualityOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.GeneralViewRepresentationOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.GeneralWireframeColorSourceOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.HiddenLineInterferingSolidsOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.HiddenLineSmallFeatureOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.LoadDraftingStandardBuilder.LoadLevel
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.ObjectPreferences.Translucency
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.PartDrafting.BreakLineStyle
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.PartDrafting.FontType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.PartDrafting.UpdateViewWithoutLwDataOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.PartDrafting.ViewStyleType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.PartDrafting.WidthType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.PartFlexiblePrintedCircuitDesign.FlatPatternCalloutOrientationType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.PartFlexiblePrintedCircuitDesign.FlatPatternObjectType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.PartFlexiblePrintedCircuitDesign.FlexibleCableContactFaceOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.PartModeling.CurveCurvatureDisplayType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.PartModeling.DensityUnitType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.PartModeling.GridKnotLineFontType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.PartModeling.GridResolutionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.PartObject.ColorSelection
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.PartObject.LineFontType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.PartObject.ObjectType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.PartObject.WidthType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.PartSheetmetal.BendDefinitionMethodOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.PartSheetmetal.FlatPatternCalloutOrientationType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.PartSheetmetal.FlatPatternObjectType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.PartVisualizationColorSetting.RandomColorDisplayFor
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.PartVisualizationEmphasis.EdgesType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.PartVisualizationEmphasis.SeeThruStyleType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.PartVisualizationLine.LineFontDisplayType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.PartVisualizationNamesBorders.NameDisplay
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.PartVisualizationShade.AdvViewToleranceType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.PartVisualizationShade.HiddenShadedFaceEdges
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.PartVisualizationShade.ShadedFaceEdge
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.PartVisualizationShade.ShadedViewToleranceType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.PartVisualizationShade.ViewUpdateModeType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.PmiOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.ReferenceSetBehavior
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.RoutingApplicationView.AppType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.RoutingElectrical.ComponentMatchType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.RoutingElectrical.CreateTerminalsType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.RoutingLogical.FlowArrowEnumType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.RoutingMechanical.LineColorType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.RoutingPart.DetailLevel
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.RoutingPart.FabricationNumbering
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.RoutingPart.PreferredPortMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.RoutingPart.StockLengthDisplay
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.RoutingPart.UsePreferredPort
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.RoutingPartLibrary.ColumnStatus
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.RoutingPartLibrary.ColumnType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.RoutingPartLibrary.NodeType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.RoutingPartLibrary.RootType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.RoutingPath.AddPointsToSpline
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.RoutingPath.AllowedCornerType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.RoutingPath.ChainMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.RoutingPath.ConfirmBranchSel
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.RoutingPath.ContinueUpdOnError
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.RoutingPath.CreateSlopeConstraints
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.RoutingPath.CreateSmartRcps
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.RoutingPath.CreateTangency
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.RoutingPath.CurveType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.RoutingPath.DefaultCornerType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.RoutingPath.DisplayObject
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.RoutingPath.MergeDupRcps
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.RoutingPath.OccChainable
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.RoutingPath.RadiusMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.RoutingPath.RadiusUnits
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.RoutingStock.SpaceReservationModeFlag
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.RoutingStock.StockModeFlag
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.SessionAssemblies.DragHandlePositionOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.SessionAssemblies.PartNameOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.SessionAssemblies.PositioningTaskCollectionOptionForDesignElements
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.SessionDrafting.AnnotationStyleType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.SessionDrafting.EdgeFaceDisplayType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.SessionDrafting.GridObjectType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.SessionMeasureRequirements.ActionOnViolation
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.SessionModeling.BodyTypeOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.SessionModeling.BooleanFacePropertiesInheritance
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.SessionModeling.CurveFitMethodType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.SessionModeling.DynamicUpdateType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.SessionModeling.EndpointDisplayStyleType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.SessionModeling.FreeFormConstructionResultType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.SessionModeling.ImmediateChildrenType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.SessionModeling.LinkedAndExtractedGeometryPropertiesInheritance
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.SessionModeling.NewFacePropertiesInheritance
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.SessionModeling.PoleDisplayStyleType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.SessionModeling.PoleEditStyleType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.SessionModeling.PolylineStyleType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.SessionModeling.PreviewResolutionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.SessionModeling.SaveDataForFeatureEditOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.SessionModeling.ShareGeometriesOnSaveType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.SessionModeling.SketchDefaultActionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.SessionModeling.SketchEditType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.SessionModeling.SplineDefaultActionTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.SessionModeling.SurfaceExtensionOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.SessionPdm.JtUpdateFromSourceType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.SessionPdm.MessagesInconsistentRevisionsType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.SessionPdm.SynchroniseOnLoadType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.SessionPdm.SynchroniseOnSaveType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.SessionPdm.UnpopulatedBehaviourType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.SessionSketch.BackgroundType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.SessionSketch.OriginType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.SessionSketch.RigidSetConstraintType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.SessionUserInterface.JournalFileFormatType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.SessionUserInterface.JournalLanguageType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.SessionUserInterfaceUI.DisplayResourceBar
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.SessionVisualizationHighQualityImage.ImageSizeType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.SessionVisualizationHighQualityImage.OrientationType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.SessionVisualizationHighQualityImage.PlotQualityType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.SessionVisualizationHighQualityImage.ResolutionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.SessionVisualizationScreen.ViewTriadLocation
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.SessionVisualizationShade.SeeThruEdgesType
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.SessionVisualizationShade.SeeThruStyleType
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.SessionWorkPlane.ObjectDisplay
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.ShadingRenderingStyleOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.ShadingToleranceOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.ShipbuildingLinesViewPreferences.Lines
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.ShipbuildingLinesViewPreferences.ShipbuildingLines
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.ShipDraftingViewLinesViewPreferences.Lines
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.SketchPreferences.DimensionLabelType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.SubdivisionModelingPreferences.DisplayModes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.SubdivisionModelingPreferences.VertexSizeTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.SubdivisionModelingPreferences.VertexStyleTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.ViewVisualizationSpecialEffects.FogType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.ViewVisualizationVisual.DisplayModeType
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.ViewVisualizationVisual.HiddenEdges
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.ViewVisualizationVisual.HiddenEdgeStyleType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.ViewVisualizationVisual.HiddenEdgesType
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.ViewVisualizationVisual.RenderingStyle
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.ViewVisualizationVisual.ShadedEdgeStyleType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.ViewVisualizationVisual.SmoothEdgeFont
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.ViewVisualizationVisual.SmoothEdgeWidth
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.VisualizationFonts.StyleType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.VisualizationHandles.HandleSizeValue
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.Width
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.preferences.WorkPlane.Grid
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.PreviewPropertiesBuilder.ModelViewCreationOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.PreviewPropertiesBuilder.PartCreationOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.PrintBuilder.ImageResolutionOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.PrintBuilder.OrientationOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.PrintBuilder.OutputOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.PrintBuilder.PaperSize
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.PrintPDFBuilder.ActionOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.PrintPDFBuilder.Color
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.PrintPDFBuilder.ImageResolutionOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.PrintPDFBuilder.OutputTextOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.PrintPDFBuilder.RelationOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.PrintPDFBuilder.SizeOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.PrintPDFBuilder.UnitsOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.PrintPDFBuilder.Width
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.PropertyContainer.ListMode
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.PropertyContainer.PropertyType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.AssignDiscontinuityBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.BendCornerCollection.Type
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.BranchPathNumberingBuilder.Sequence
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.CompareRunsBuilder.CompareTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.ComponentName
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.ControlPoint.DefinedStatus
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.ControlPointCollection.CheckExisting
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.ControlPointCollection.FoundExisting
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.ConvertEccentricLinearToLinear
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.ConvertLinearToEccentricLinear
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.Corner.Type
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.CornerTypeBuilder.BendMethods
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.CornerTypeBuilder.BendOptions
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.CornerTypeBuilder.Type
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.CreationMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.DesignRuleViolation.BlankOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.DesignRuleViolationCollection.Mode
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.DesignRuleViolationCollection.Reason
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.DesignRuleViolationLocationCollection.DeleteOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.DesignRuleViolationViewer.FilterOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.DesignRuleViolationViewer.OverrideOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.DeviceRelationship.RelationType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.Division.SplitDirectionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.DivisionsBuilder.SplitDirectionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.DuctReinforcementBuilder.ReinforcementTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.DuctSizeCalculatorBuilder.DuctShapeType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.Eccentric
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.electrical.ConnectorDevice.Assign
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.electrical.ConnectorDevice.ComponentType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.electrical.ElectricalFormat.Type
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.electrical.ElectricalStockDefinition.SectionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.electrical.ElectricalStockDevice.AutoRouteSel
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.electrical.ElectricalStockDevice.RouteLevel
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.electrical.ElectricalStockDevice.RouteTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.FittingOverstockBuilder.TrimMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.FittingOverstockBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.Flip
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.HandrailBuilder.PostTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.HealMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.IntegrateRunsBuilder.Button
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.IntegrateRunsBuilder.Enum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.InterfaceTerminalRelationshipBase.RelationType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.Interior
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.IsoDrawingBuilder.DrawingTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.IsoDrawingBuilder.RunsToDrawTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.Method
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.ModelTerminalsBuilder.CutBackLocationOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.ModelTerminalsBuilder.ExtensionValueOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.OffsetPathCollection.BendType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.Operation
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.OverstockBuilder.ApplicationType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.OverstockBuilder.PointType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.OverstockBuilder.WrapType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.PathStockBuilder.AssignMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.PathStockBuilder.AssignStockType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.PlatformCreatorBuilder.ReferenceType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.PointDefinition
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.ProfileFrom
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.ReuseLibrary.PartType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.ReuseLibrary.ReportInBom
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.RouteManager.BomBlankLines
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.RouteManager.BomFabrication
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.RouteManager.BomLevel
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.RouteManager.BomStockLength
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.RouteManager.ImportMode
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.RouteManager.PartType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.RoutePartDescriptor.CharxType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.RoutePartDescriptor.SourceType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.Run.CompareStatus
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.Run.FlipStatus
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.Run.Status
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.RunItem.Type
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.SegmentManager.SubdivideSpacing
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.SingleDevice.DeleteObjectResult
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.SplineOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.SplinePathBuilder.SplinePathAttributeOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.SplinePathBuilder.SplinePathSlackType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.SplitDuctBuilder.FlowTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.StockBrowserBuilder.TypeFilter
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.StockBuilder.StockStyleType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.StockDataType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.StockOffsetPointBuilder.PointType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.StockPartConverterBuilder.PartOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.StockStyle
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.StockStyleBuilder.StockStyle
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.StockType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.StockUse
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.SubdivideSegmentBuilder.EqualSegmentsMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.SubdivideSegmentBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.Terminal
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.TransformPathBuilder.CopyAttributes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.TransformPathBuilder.TransformOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.Type
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.UserDefined
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.WindCatcherBuilder.WindCatcherType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.routing.WrapApplicationType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.RuleManager.Filter
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.RuleManager.InitializationStatusType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.RuleManager.LicenseType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.RuleManager.RuleType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.Scalar.DimensionalityType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.Section.AllowTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.Section.DeselectOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.Section.Mode
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.SectionCollection.LoopOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.Selection.DialogResponse
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.Selection.Response
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.Selection.SelectionAction
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.Selection.SelectionFeatureType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.Selection.SelectionScope
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.Selection.SelectionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.Selection.UistylerSelectionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.SelectionIntentRule.RuleType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.Sense
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.Session.MarkVisibility
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.Session.ProjectAssignmentObjectType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.Session.ProjectAssignmentState
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.Session.TransientPartPolicy
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.shapesearch.ShapeSearchBuilder.OpenPartType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.shapesearch.ShapeSearchBuilder.SearchByType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.shapesearch.ShapeSearchBuilder.ShapeSimilarity
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.shapesearch.ShapeSearchBuilder.ShapeSize
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.sheetmetal.FlatPatternSettings.FlatPatternObjectType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.sim.IsvControlPanelBuilder.SingleStepType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.sim.IsvControlPanelBuilder.VisualizationType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.sim.KinematicAxisBuilder.AxisDirectionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.sim.KinematicAxisBuilder.AxisMotionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.sim.KinematicChain.CoordinatePlaneTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.sim.KinematicChain.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.sim.KinematicComponentBuilder.RegisterTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.sim.KinematicComponentBuilder.SystemClass
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.sim.KinematicComponentBuilder.WorkPositionAngleTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.sim.KinematicConfigurator.UniteTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.sim.KinematicJunctionBuilder.SystemClass
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.sim.KinematicSinumerikCaBuilder.PlcInitStateTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.sim.KinematicSinumerikCaBuilder.PlcUsageTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.sim.SimDebugBuilder.DriverType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.sim.SimDebugBuilder.DumpType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.sim.SimDebugBuilder.KinematicModelType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.sim.SimDebugBuilder.OutputType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.sim.SimDebugBuilder.PrintoutTagsOrPointersType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.sim.SimDebugBuilder.TraceType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.sim.SimDebugBuilder.UiType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.sim.SinumerikCaSimplifyBodiesBuilder.CloseGapTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.sim.SinumerikCaSimplifyBodiesBuilder.ObjectToReplaceWithTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.Sketch.AddEllipseOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.Sketch.AlternateSolutionOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.Sketch.AssocType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.Sketch.AutoDimensioningRule
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.Sketch.ConstraintClass
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.Sketch.ConstraintGeometryHelpType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.Sketch.ConstraintPointType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.Sketch.ConstraintType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.Sketch.ConstraintVisibility
-
Deprecated.
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.Sketch.CreateDimensionOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.Sketch.CreateInferConstraintSetting
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.Sketch.DeleteThirdCurveOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.Sketch.DimensionOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.Sketch.InferConstraintsOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.Sketch.PlaneOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.Sketch.Status
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.Sketch.TrimInputOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.Sketch.UpdateLevel
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.Sketch.ViewReorient
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.SketchAlongPathBuilder.PlaneOrientationType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.SketchAlongPathBuilder.SketchOrientationType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.SketchAssociativeTrimBuilder.TrimOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.SketchAutoDimensionBuilder.DimType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.SketchChamferBuilder.ChamferOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.SketchConstraintBuilder.Constraint
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.SketchDimensionalConstraint.DimensionStateType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.SketchDimensionBuilder.ExpOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.SketchExpressionModifierBuilder.EndCuts
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.SketchG1Constraint.SlopeType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.SketchOffset.CapType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.SketchPattern.InstanceControl
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.SketchPattern.Type
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.SketchPolygonBuilder.SizeType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.SketchProjectBuilder.OutputCurve
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.SmartObject.UpdateOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.SmartObject.VisibilityOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.Step203Creator.EntityNameOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.Step203Creator.ExportFromOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.Step203Creator.ExternalReferenceOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.Step203Importer.ImportToOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.Step214Creator.EntityNameOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.Step214Creator.ExportFromOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.Step214Creator.ExternalReferenceOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.Step214Importer.ImportToOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.STLImporter.AngularToleranceType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.STLImporter.FileFormatType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.STLImporter.FileUnitsType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.SuppressByExpressionBuilder.ExpressionAction
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.SurfaceRebuildData.Type
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.AddReusablePart.ModeMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.AddReusablePart.PositionMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.AssemblyDrawingBuilder.AttributeNames
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.AssemblyDrawingBuilder.AttributeValues
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.AssemblyDrawingBuilder.DrawingCreateOrEdit
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.AssemblyDrawingBuilder.DrawingTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.AssemblyDrawingBuilder.ModelViewToUseValue
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.AssemblyDrawingBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.AssemblyDrawingBuilder.ViewOptionValue
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.AutoDimensionBuilder.MainType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.AutoDimensionBuilder.TextFontType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.AutoDimensionBuilder.TextOrientationType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.AutoDimensionBuilder.ToleranceType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.AutoDimensionBuilder.ValuePrecisionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.BackingPadBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.BendInsertDesignBuilder.BendingDirectionOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.BendInsertDesignBuilder.BendTypeOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.BendInsertDesignBuilder.BlankPositions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.BendInsertDesignBuilder.InsertTypeOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.BendInsertDesignBuilder.ParentOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.BendInsertDesignBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.BendOperationBuilder.OverbendOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.BendOperationBuilder.Prebend
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.BendOperationBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.BlankGeneratorBuilder.CreateBlankType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.BlankGeneratorBuilder.EditBlankType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.BlankGeneratorBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.BlankLayoutBuilder.LeftRightSideOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.BlankLayoutBuilder.SideWebOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.BlankLayoutBuilder.SnapSizeOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.BlankLayoutBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.BlankNestingBuilder.LayoutTypeSpecification
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.BlendCurve3DBuilder.BlendCurveOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.BlendCurve3DBuilder.InputCurvesOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.BomBuilder.Circle
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.BomBuilder.Shape
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.BomBuilder.TreeList
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.BomListBuilder.BomListTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.BurringInsertBuilder.BurringDirections
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.BurringInsertBuilder.BurringPunchTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.BurringInsertBuilder.CircularOrNonCircularType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.BurringInsertBuilder.DesignOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.BurringInsertBuilder.ParentTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.ChangeoverManagementBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.ChannelAdjustBuilder.AdjustType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.ChannelAdjustBuilder.VectorMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.ClearanceManagementBuilder.Selection
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.ClearanceManagementBuilder.Type
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.CompDrawingBuilder.ComponentTypeSelection
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.CompDrawingBuilder.DrawingType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.CompDrawingBuilder.FilterSelection
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.CompDrawingBuilder.ProjectionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.ConcurrentDesignManagementBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.ConcurrentDesignManagementBuilder.UpdateTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.CoolingDefineChannelBuilder.ExtensionTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.CoolingDefineChannelBuilder.TipEndTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.CoolingDefineChannelBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.CoolingExtendBuilder.TipEndTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.CornerDesignBuilder.CornerTypeOpt
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.CornerDesignBuilder.SelectFromOpt
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.CornerDesignBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.CreateBoxBuilder.BoxType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.DefineCamBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.DefineLifterBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.DefineNeutralFactorBuilder.FormulaOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.DieBaseBuilder.AlongDirectionOpt
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.DieBaseBuilder.CatalogOpt
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.DieBaseBuilder.DesignToolOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.DieBaseBuilder.DieBaseTypeOpt
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.DieBaseBuilder.ParentNodeOpt
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.DieBaseBuilder.PlatesNumberOpt
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.DieBaseBuilder.SplitMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.DieBaseBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.DieDesPierceInsertBuilder.Direction
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.DieDesPierceInsertBuilder.HoleShapeTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.DieEngProcessUpdateManagerBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.DieEngStampingOutputBuilder.DisplayProductType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.DieEngStampingOutputBuilder.SpringbackMethodType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.DieEngTrimAngleCheckBuilder.DirectionOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.DieEngTrimTaskBuilder.TrimTaskCamType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.DieEngTrimTaskBuilder.TrimTaskMatchCutType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.DirectUnbendBuilder.Bendtypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.DirectUnfoldBuilder.Bend
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.DirectUnfoldBuilder.BodyList
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.DirectUnfoldBuilder.MatType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.DirectUnfoldBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.EdgePatchBuilder.PatchStatus
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.EdgePatchBuilder.SelectTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.EjectorPostProcessingBuilder.TrimMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.EjectorPostProcessingBuilder.TrimPartName
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.EjectorPostProcessingBuilder.TrimSufaceName
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.ElectrodeBlankBuilder.BlankMaterial
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.ElectrodeBlankBuilder.BlankShape
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.ElectrodeBlankBuilder.JointObject
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.ElectrodeComponentBuilder.Chuck
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.ElectrodeCopyBuilder.Copy
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.ElectrodeDeleteBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.EnlargeSurfaceBuilder.KeepDiscardOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.EWDraftingBuilder.CNCTemplateOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.EWDraftingBuilder.DrawingOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.EWDraftingBuilder.EDMTemplateOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.EWDraftingBuilder.ModeOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.EWDraftingBuilder.NameOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.FaceColorManagementBuilder.HoleTypeEnumValue
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.FaceSplitBuilder.FaceSplitType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.FastenerAssy.HoleOperation
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.FastenerAssy.ModeMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.FastenerAssy.SelectionObjectMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.FastenerAssy.SelectionTypeMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.FastenerAssy.StackTypeMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.FlowDisplayBuilder.AnalysisResults
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.ForceCalculationBuilder.CalculationTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.ForceCalculationBuilder.ProcessTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.FormingInsertBuilder.BlankPositions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.FormingInsertBuilder.BlankTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.FormingInsertBuilder.DesignOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.FormingInsertBuilder.ParentTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.GeneralInsertBuilder.GenerateMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.GeneralInsertBuilder.ParentOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.GeneralInsertBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.GuidedExtensionBuilder.SegmentType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.HoleManufacturingNoteBuilder.DefineByViewOrHoles
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.HoleManufacturingNoteBuilder.HoleIndexType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.InitProjBuilder.ProjTempOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.InitProjectBuilder.ConfigurationId
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.InitProjectBuilder.MaterialId
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.InitProjectBuilder.UnitId
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.InsertAuxiliaryBuilder.CircOperationTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.InsertAuxiliaryBuilder.DesignToolOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.InsertAuxiliaryBuilder.RectOperationOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.InsertAuxiliaryBuilder.ShankShapeTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.InsertAuxiliaryBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.IntermediateStageBuilder.DesignSequences
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.IntermediateStageBuilder.EditOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.IntermediateStageBuilder.Orientations
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.LayoutBuilder.BalNumber
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.LayoutBuilder.LayoutSubType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.LayoutBuilder.LayoutType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.LayoutBuilder.XrefNum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.LayoutBuilder.YrefNum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.LayoutManagementBuilder.StationItems
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.LayoutRepositionBuilder.Method
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.LayoutRepositionBuilder.Type
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder.FormabilityStrainTypeName
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder.StrainTypeName
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder.StressTypeName
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.LsdynaGeometryPreparationBuilder.BlankOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.LsdynaGeometryPreparationBuilder.BlankPosition
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.LsdynaGeometryPreparationBuilder.ContactType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.LsdynaGeometryPreparationBuilder.DrawBeadType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.LsdynaGeometryPreparationBuilder.DrawType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.LsdynaGeometryPreparationBuilder.MaterialType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.LsdynaGeometryPreparationBuilder.ProcessActionBinder
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.LsdynaGeometryPreparationBuilder.ProcessActionDie
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.LsdynaGeometryPreparationBuilder.ProcessActionPunch
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.LsdynaGeometryPreparationBuilder.ProcessType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.LsdynaGeometryPreparationBuilder.TargetBinder
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.LsdynaGeometryPreparationBuilder.TargetDie
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.LsdynaGeometryPreparationBuilder.TargetPunch
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.LsdynaKfileGeneratorBuilder.MeshDataType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.LsdynaKfileGeneratorBuilder.MeshElementType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.LsdynaKfileGeneratorBuilder.OperTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.MoldCsysBuilder.Wcsposition
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.MoldInsertBuilder.BooleanType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.MotionSimulationBuilder.CamDefinitionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.MotionSimulationBuilder.EjectorMoveOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.MotionSimulationBuilder.MoldbaseStyleType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.MotionSimulationBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.MWCopySheetsBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.MWDefineRegionsBuilder.TranslucencyOptionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.MWDesignGuideLinesBuilder.DirectionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.MWDesignPartingSurfaceBuilder.ObjectType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.MWDesignPartingSurfaceBuilder.PartingSurfaceType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.MWDesignPartingSurfaceBuilder.TransitionSurfaceType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.MWDesignPartingSurfaceBuilder.TrimAndExtendFromRegionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.MWMoldedPartValidationBuilder.AssignToRegion
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.MWMoldedPartValidationBuilder.CalculateOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.MWMoldedPartValidationBuilder.CheckScope
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.MWMoldedPartValidationBuilder.RangeType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.MWPartingManagerBuilder.DataStatus
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.MWPartingManagerBuilder.RegisterType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.ObjectAttributeManagementBuilder.FilterAccordingToAttributeType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.ObjectAttributeManagementBuilder.FilterType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.ObjectAttributeManagementBuilder.ShowComponentsType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.ObjectAttributeManagementBuilder.ShowType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.PiercingInsertBuilder.AssociationToolType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.PiercingInsertBuilder.DieInsertTypeItems
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.PiercingInsertBuilder.InsertPosition
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.PiercingInsertBuilder.NormalBbpslugType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.PiercingInsertBuilder.NormalCavityType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.PiercingInsertBuilder.NormalClearanceOptionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.PiercingInsertBuilder.NormalDsslugType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.PiercingInsertBuilder.NormalOffsetSideType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.PiercingInsertBuilder.NormalUdpparentPartType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.PiercingInsertBuilder.PunchPocketTypeItemsBP
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.PiercingInsertBuilder.PunchPocketTypeItemsPP
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.PiercingInsertBuilder.PunchPocketTypeItemsSP
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.PiercingInsertBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.PocketBuilder.ModeType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.PocketBuilder.RsetType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.PocketBuilder.ToolType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.PrebendBuilder.NumberBendsOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.QuickQuotationBuilder.DesignTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.QuickQuotationBuilder.InsertGroupMaterials
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.QuickQuotationBuilder.ManageTemporaryObjectsTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.QuickQuotationBuilder.ObjectTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.QuickQuotationBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.ReliefDesignBuilder.Method
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.ReliefDesignBuilder.MethodOfDelete
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.ReliefDesignBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.RemoveHolesBuilder.SelectionTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.ReusableObjectPasteBuilder.PasteMethods
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.ReusablePocketBuilder.Hole
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.RunnerBuilder.GuideEndType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.RunnerBuilder.SectionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.ScrapDesignBuilder.AddonType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.ScrapDesignBuilder.Body
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.ScrapDesignBuilder.DefScrapType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.ScrapDesignBuilder.EditScrapType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.ScrapDesignBuilder.OvercutType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.ScrapDesignBuilder.RemoveType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.ScrapDesignBuilder.ScrapDefPosition
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.ScrapDesignBuilder.ScrapDefType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.ScrapDesignBuilder.TrimNumType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.ShimBuilder.ParentOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.ShimBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.SolidPatchBuilder.SolidPatchType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.SpecifyBaffleBuilder.AttributeTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.SplitSolidBuilder.OperationType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.SplitSolidBuilder.ToolObjectOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.SpreadsheetData.KeywordType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.SpreadsheetData.ParameterStatus
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.SpreadsheetDataParameter.Status
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.StandardPartBuilder.EditType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.StandardPartBuilder.RefsetName
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.StripLayoutBuilder.FromStationType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.StripLayoutBuilder.ToStationType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.SubInsertBuilder.Shape
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.SubInsertBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.ToolingApplication
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.ToolingCloneaction
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.ToolingClonemethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.ToolingCloneparttype
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.TrimMoldComponentsBuilder.TargetScope
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.TrimMoldComponentsBuilder.TrimMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.TrimMoldComponentsBuilder.TrimPartName
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.TrimMoldComponentsBuilder.TrimSurfaceName
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.TrimRegionBuilder.BoundaryOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.TrimRegionBuilder.RegionOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.TrimSolidBuilder.TrimSolidAction
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.TrimSolidBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.UniversalUnformBuilder.BendTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.UnusedFileManagementBuilder.FileDirectory
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.ValidCheckBuilder.AnalysisMode
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.ValidCheckBuilder.CheckingType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.ValidCheckBuilder.SelMode
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.WallThicknessCheckerBuilder.CalculateMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.WallThicknessCheckerBuilder.LegendControl
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.WallThicknessCheckerBuilder.RangeType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.WorkpieceBuilder.MethodType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.WorkpieceBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.tooling.WorkpieceBuilder.WorkPieceType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.uf.UF.CallbackReason
-
- values() - Static method in class nxopen.uf.UF.Codeset
-
- values() - Static method in class nxopen.uf.UFAssem.ExplStatus
-
- values() - Static method in class nxopen.uf.UFAssem.LevelOption
-
- values() - Static method in class nxopen.uf.UFBrep.GeomType
-
- values() - Static method in class nxopen.uf.UFBrep.Orientation
-
- values() - Static method in class nxopen.uf.UFBrep.TopoSource
-
- values() - Static method in class nxopen.uf.UFBrep.TopoType
-
- values() - Static method in class nxopen.uf.UFCam.AvoidanceType
-
- values() - Static method in class nxopen.uf.UFCam.BlankGeomType
-
- values() - Static method in class nxopen.uf.UFCam.BoundaryType
-
- values() - Static method in class nxopen.uf.UFCam.FeedrateUnit
-
- values() - Static method in class nxopen.uf.UFCam.GeomType
-
- values() - Static method in class nxopen.uf.UFCam.MaterialSide
-
- values() - Static method in class nxopen.uf.UFCam.OptStypeCls
-
- values() - Static method in class nxopen.uf.UFCam.ToolPosition
-
- values() - Static method in class nxopen.uf.UFCambnd.UdeSetType
-
- values() - Static method in class nxopen.uf.UFCamgeom.CustomPointType
-
- values() - Static method in class nxopen.uf.UFCamPref.CamPref
-
- values() - Static method in class nxopen.uf.UFCgm.Colors
-
- values() - Static method in class nxopen.uf.UFCgm.ExportReason
-
- values() - Static method in class nxopen.uf.UFCgm.Fonts
-
- values() - Static method in class nxopen.uf.UFCgm.SizeMode
-
- values() - Static method in class nxopen.uf.UFCgm.TextMode
-
- values() - Static method in class nxopen.uf.UFCgm.Units
-
- values() - Static method in class nxopen.uf.UFCgm.VdcMode
-
- values() - Static method in class nxopen.uf.UFCgm.Widths
-
- values() - Static method in class nxopen.uf.UFCgm.WidthSingle
-
- values() - Static method in class nxopen.uf.UFCgm.WidthUse
-
- values() - Static method in class nxopen.uf.UFClone.Action
-
- values() - Static method in class nxopen.uf.UFClone.CloneRelCae
-
- values() - Static method in class nxopen.uf.UFClone.ConvertCb
-
- values() - Static method in class nxopen.uf.UFClone.FamilyTreatment
-
- values() - Static method in class nxopen.uf.UFClone.NameRuleType
-
- values() - Static method in class nxopen.uf.UFClone.NamingTechnique
-
- values() - Static method in class nxopen.uf.UFClone.NotifyCb
-
- values() - Static method in class nxopen.uf.UFClone.OperationClass
-
- values() - Static method in class nxopen.uf.UFClone.PartStateS
-
- values() - Static method in class nxopen.uf.UFClone.ValidationMode
-
- values() - Static method in class nxopen.uf.UFCurve.AssoArcSubtype
-
- values() - Static method in class nxopen.uf.UFCurve.BridgeMethod
-
- values() - Static method in class nxopen.uf.UFCurve.ConstraintType
-
- values() - Static method in class nxopen.uf.UFCurve.Direction
-
- values() - Static method in class nxopen.uf.UFCurve.EndType
-
- values() - Static method in class nxopen.uf.UFCurve.HelpDataType
-
- values() - Static method in class nxopen.uf.UFCurve.JoinTypes
-
- values() - Static method in class nxopen.uf.UFCurve.LimitType
-
- values() - Static method in class nxopen.uf.UFCurve.LineArcType
-
- values() - Static method in class nxopen.uf.UFCurve.OcfCrossBoundaries
-
- values() - Static method in class nxopen.uf.UFCurve.OcfMethod
-
- values() - Static method in class nxopen.uf.UFCurve.OcfSpanMethod
-
- values() - Static method in class nxopen.uf.UFCurve.OcfTrimMethod
-
- values() - Static method in class nxopen.uf.UFCurve.OffsetType
-
- values() - Static method in class nxopen.uf.UFCurve.PrincipalAxis
-
- values() - Static method in class nxopen.uf.UFCurve.TrimOpts
-
- values() - Static method in class nxopen.uf.UFCurve.WrapType
-
- values() - Static method in class nxopen.uf.UFDieeng.Opts
-
- values() - Static method in class nxopen.uf.UFDisp.BackgroundColor
-
- values() - Static method in class nxopen.uf.UFDisp.ColorName
-
- values() - Static method in class nxopen.uf.UFDisp.Context
-
- values() - Static method in class nxopen.uf.UFDisp.GridContext
-
- values() - Static method in class nxopen.uf.UFDisp.GridType
-
- values() - Static method in class nxopen.uf.UFDisp.ImageFormat
-
- values() - Static method in class nxopen.uf.UFDisp.MaterialSource
-
- values() - Static method in class nxopen.uf.UFDisp.PolyMarker
-
- values() - Static method in class nxopen.uf.UFDisp.ShadeDisplay
-
- values() - Static method in class nxopen.uf.UFDisp.ShadeFormat
-
- values() - Static method in class nxopen.uf.UFDisp.ShadeMethod
-
- values() - Static method in class nxopen.uf.UFDisp.ShadePlot
-
- values() - Static method in class nxopen.uf.UFDisp.TextRef
-
- values() - Static method in class nxopen.uf.UFDisp.TextureSpaceType
-
- values() - Static method in class nxopen.uf.UFDisp.ViewType
-
- values() - Static method in class nxopen.uf.UFDisp.WmfOutput
-
- values() - Static method in class nxopen.uf.UFDpud.ProjOption
-
- values() - Static method in class nxopen.uf.UFDpud.Purpose
-
- values() - Static method in class nxopen.uf.UFDpud.TaxisOption
-
- values() - Static method in class nxopen.uf.UFDraw.ArwHeadCntl
-
- values() - Static method in class nxopen.uf.UFDraw.ArwHeadType
-
- values() - Static method in class nxopen.uf.UFDraw.BoundaryType
-
- values() - Static method in class nxopen.uf.UFDraw.BreakPositionType
-
- values() - Static method in class nxopen.uf.UFDraw.CompSectionInView
-
- values() - Static method in class nxopen.uf.UFDraw.EdgeHidingEdge
-
- values() - Static method in class nxopen.uf.UFDraw.ExtractedEdges
-
- values() - Static method in class nxopen.uf.UFDraw.Gap
-
- values() - Static method in class nxopen.uf.UFDraw.HiddenLine
-
- values() - Static method in class nxopen.uf.UFDraw.LabelOnParentType
-
- values() - Static method in class nxopen.uf.UFDraw.ProjDir
-
- values() - Static method in class nxopen.uf.UFDraw.ProjectionAngle
-
- values() - Static method in class nxopen.uf.UFDraw.SecondaryIndexingAlign
-
- values() - Static method in class nxopen.uf.UFDraw.Silhouette
-
- values() - Static method in class nxopen.uf.UFDraw.SizeState
-
- values() - Static method in class nxopen.uf.UFDraw.Smooth
-
- values() - Static method in class nxopen.uf.UFDraw.SxAssyXhatch
-
- values() - Static method in class nxopen.uf.UFDraw.SxBackground
-
- values() - Static method in class nxopen.uf.UFDraw.SxCrosshatch
-
- values() - Static method in class nxopen.uf.UFDraw.SxlineDisplay
-
- values() - Static method in class nxopen.uf.UFDraw.SxlineLeg
-
- values() - Static method in class nxopen.uf.UFDraw.SxlineStatus
-
- values() - Static method in class nxopen.uf.UFDraw.SxlineType
-
- values() - Static method in class nxopen.uf.UFDraw.SxSectionSheetBody
-
- values() - Static method in class nxopen.uf.UFDraw.SxsegHighlight
-
- values() - Static method in class nxopen.uf.UFDraw.SxsegMode
-
- values() - Static method in class nxopen.uf.UFDraw.SxsegType
-
- values() - Static method in class nxopen.uf.UFDraw.TabnotBorderType
-
- values() - Static method in class nxopen.uf.UFDraw.TabnotJust
-
- values() - Static method in class nxopen.uf.UFDraw.Uvhatch
-
- values() - Static method in class nxopen.uf.UFDraw.ViewLabelLetterFormat
-
- values() - Static method in class nxopen.uf.UFDraw.ViewLabelParmType
-
- values() - Static method in class nxopen.uf.UFDraw.ViewLabelPosition
-
- values() - Static method in class nxopen.uf.UFDraw.ViewLabelScaleFormat
-
- values() - Static method in class nxopen.uf.UFDraw.ViewLabelScalePosition
-
- values() - Static method in class nxopen.uf.UFDraw.ViewLabelViewTextType
-
- values() - Static method in class nxopen.uf.UFDraw.ViewStatus
-
- values() - Static method in class nxopen.uf.UFDraw.VirtualIntersect
-
- values() - Static method in class nxopen.uf.UFDrf.AlignPosition
-
- values() - Static method in class nxopen.uf.UFDrf.AngularSuppressZeros
-
- values() - Static method in class nxopen.uf.UFDrf.AngularUnits
-
- values() - Static method in class nxopen.uf.UFDrf.AppendedTextLocation
-
- values() - Static method in class nxopen.uf.UFDrf.AreaFillMaterial
-
- values() - Static method in class nxopen.uf.UFDrf.ArrowDisplay
-
- values() - Static method in class nxopen.uf.UFDrf.ArrowFillType
-
- values() - Static method in class nxopen.uf.UFDrf.ArrowheadAndFillType
-
- values() - Static method in class nxopen.uf.UFDrf.ArrowType
-
- values() - Static method in class nxopen.uf.UFDrf.AssociativeOriginType
-
- values() - Static method in class nxopen.uf.UFDrf.AssocLineType
-
- values() - Static method in class nxopen.uf.UFDrf.AssocType
-
- values() - Static method in class nxopen.uf.UFDrf.ChamferDimensionForm
-
- values() - Static method in class nxopen.uf.UFDrf.ChamferDimensionLeaderType
-
- values() - Static method in class nxopen.uf.UFDrf.ChamferDimensionStubType
-
- values() - Static method in class nxopen.uf.UFDrf.ChamferDimensionSymbolType
-
- values() - Static method in class nxopen.uf.UFDrf.CustomSymbolTextType
-
- values() - Static method in class nxopen.uf.UFDrf.DecimalPointCharacter
-
- values() - Static method in class nxopen.uf.UFDrf.DiameterRadiusPlacement
-
- values() - Static method in class nxopen.uf.UFDrf.DiameterSymbol
-
- values() - Static method in class nxopen.uf.UFDrf.DimensionOrientation
-
- values() - Static method in class nxopen.uf.UFDrf.DoglegType
-
- values() - Static method in class nxopen.uf.UFDrf.DualDimensionFormat
-
- values() - Static method in class nxopen.uf.UFDrf.ExtensionLineDisplay
-
- values() - Static method in class nxopen.uf.UFDrf.FractionDenominator
-
- values() - Static method in class nxopen.uf.UFDrf.FractionType
-
- values() - Static method in class nxopen.uf.UFDrf.FrameCorner
-
- values() - Static method in class nxopen.uf.UFDrf.IdSymbolType
-
- values() - Static method in class nxopen.uf.UFDrf.InheritType
-
- values() - Static method in class nxopen.uf.UFDrf.InspectionType
-
- values() - Static method in class nxopen.uf.UFDrf.LeaderAttachType
-
- values() - Static method in class nxopen.uf.UFDrf.LeaderMode
-
- values() - Static method in class nxopen.uf.UFDrf.LeaderOrientation
-
- values() - Static method in class nxopen.uf.UFDrf.LeaderSide
-
- values() - Static method in class nxopen.uf.UFDrf.LeaderType
-
- values() - Static method in class nxopen.uf.UFDrf.LinearUnits
-
- values() - Static method in class nxopen.uf.UFDrf.LineWidth
-
- values() - Static method in class nxopen.uf.UFDrf.NarrowDimensionDisplayType
-
- values() - Static method in class nxopen.uf.UFDrf.NarrowDimensionTextOrientation
-
- values() - Static method in class nxopen.uf.UFDrf.ObjectAssocLineType
-
- values() - Static method in class nxopen.uf.UFDrf.ObjectAssocPointType
-
- values() - Static method in class nxopen.uf.UFDrf.OrdarrowLineType
-
- values() - Static method in class nxopen.uf.UFDrf.OrdoriginDisplayType
-
- values() - Static method in class nxopen.uf.UFDrf.QuadrantType
-
- values() - Static method in class nxopen.uf.UFDrf.RadiusSymbol
-
- values() - Static method in class nxopen.uf.UFDrf.ReferenceSymbolType
-
- values() - Static method in class nxopen.uf.UFDrf.RetainedState
-
- values() - Static method in class nxopen.uf.UFDrf.StackAlignPosition
-
- values() - Static method in class nxopen.uf.UFDrf.SymbolConnectionType
-
- values() - Static method in class nxopen.uf.UFDrf.TextAboveLeader
-
- values() - Static method in class nxopen.uf.UFDrf.TextArrowPlacement
-
- values() - Static method in class nxopen.uf.UFDrf.TextJust
-
- values() - Static method in class nxopen.uf.UFDrf.TextType
-
- values() - Static method in class nxopen.uf.UFDrf.TolerancePlacement
-
- values() - Static method in class nxopen.uf.UFDrf.ToleranceType
-
- values() - Static method in class nxopen.uf.UFDrf.TrimDimLineStyle
-
- values() - Static method in class nxopen.uf.UFDrf.UdsSizeType
-
- values() - Static method in class nxopen.uf.UFDrf.UdSymbolPenType
-
- values() - Static method in class nxopen.uf.UFDrf.ValidClineForm
-
- values() - Static method in class nxopen.uf.UFDrf.ValidMaterial
-
- values() - Static method in class nxopen.uf.UFDrf.VerticalTextJust
-
- values() - Static method in class nxopen.uf.UFDrf.ViewLabelTextToStubFormat
-
- values() - Static method in class nxopen.uf.UFDrf.WeldContourTypes
-
- values() - Static method in class nxopen.uf.UFDrf.WeldFinishTypes
-
- values() - Static method in class nxopen.uf.UFDrf.WeldIdentLineType
-
- values() - Static method in class nxopen.uf.UFDrf.WeldSizeCode
-
- values() - Static method in class nxopen.uf.UFDrf.WeldSymbolTypes
-
- values() - Static method in class nxopen.uf.UFDrf.WeldSymExtType
-
- values() - Static method in class nxopen.uf.UFDrpos.FeedUnit
-
- values() - Static method in class nxopen.uf.UFDrpos.FeedUse
-
- values() - Static method in class nxopen.uf.UFDrpos.Type
-
- values() - Static method in class nxopen.uf.UFDrpos.ZigZagDir
-
- values - Variable in class nxopen.uf.UFFam.MemberData
-
- values() - Static method in class nxopen.uf.UFFbmGeom.CritValueType
-
- values() - Static method in class nxopen.uf.UFGdt.Characteristic
-
- values() - Static method in class nxopen.uf.UFGdt.DatumAssocType
-
- values() - Static method in class nxopen.uf.UFGdt.DirectedDimensionType
-
- values() - Static method in class nxopen.uf.UFGdt.EdgeSelectType
-
- values() - Static method in class nxopen.uf.UFGdt.FeatureType
-
- values() - Static method in class nxopen.uf.UFGdt.GeometricDefinitionType
-
- values() - Static method in class nxopen.uf.UFGdt.IndexDisplayType
-
- values() - Static method in class nxopen.uf.UFGdt.LeaderType
-
- values() - Static method in class nxopen.uf.UFGdt.LimitsAndFitsDisplayType
-
- values() - Static method in class nxopen.uf.UFGdt.MaterialModifier
-
- values() - Static method in class nxopen.uf.UFGdt.ModifierTypes
-
- values() - Static method in class nxopen.uf.UFGdt.ModlParameter
-
- values() - Static method in class nxopen.uf.UFGdt.PatternType
-
- values() - Static method in class nxopen.uf.UFGdt.Precedence
-
- values() - Static method in class nxopen.uf.UFGdt.ProfileType
-
- values() - Static method in class nxopen.uf.UFGdt.RelationType
-
- values() - Static method in class nxopen.uf.UFGdt.SizeValueType
-
- values() - Static method in class nxopen.uf.UFGdt.Standard
-
- values() - Static method in class nxopen.uf.UFGdt.StubDirection
-
- values() - Static method in class nxopen.uf.UFGdt.TextLocation
-
- values() - Static method in class nxopen.uf.UFGdt.ToleranceType
-
- values() - Static method in class nxopen.uf.UFGdt.TolFormat
-
- values() - Static method in class nxopen.uf.UFGdt.ZoneShape
-
- values() - Static method in class nxopen.uf.UFGexp.Qualifier
-
- values() - Static method in class nxopen.uf.UFKf.ClassType
-
- values() - Static method in class nxopen.uf.UFKf.Type
-
- values - Variable in class nxopen.uf.UFLib.AskRecordInRsetData
-
- values() - Static method in class nxopen.uf.UFLib.NcmctSetupReplaceMode
-
- values() - Static method in class nxopen.uf.UFMb.State
-
- values() - Static method in class nxopen.uf.UFMfm.AttrValueType
-
- values() - Static method in class nxopen.uf.UFMfm.MachinedStatus
-
- values() - Static method in class nxopen.uf.UFMfm.SourceType
-
- values() - Static method in class nxopen.uf.UFModl.BeadAngleRelative
-
- values() - Static method in class nxopen.uf.UFModl.BeadAttach
-
- values() - Static method in class nxopen.uf.UFModl.BeadEnds
-
- values() - Static method in class nxopen.uf.UFModl.BeadHollow
-
- values() - Static method in class nxopen.uf.UFModl.BeadPlaneNormal
-
- values() - Static method in class nxopen.uf.UFModl.BeadShape
-
- values() - Static method in class nxopen.uf.UFModl.BeadWidthRelative
-
- values() - Static method in class nxopen.uf.UFModl.BendOperationE
-
- values() - Static method in class nxopen.uf.UFModl.BlendRadiusTypes
-
- values() - Static method in class nxopen.uf.UFModl.BooleanBody
-
- values() - Static method in class nxopen.uf.UFModl.CompareAccuracy
-
- values() - Static method in class nxopen.uf.UFModl.CompareChangeduniquefaceRule
-
- values() - Static method in class nxopen.uf.UFModl.CompareEntityType
-
- values() - Static method in class nxopen.uf.UFModl.CompareIdenticalfaceRule
-
- values() - Static method in class nxopen.uf.UFModl.DensityUnits
-
- values() - Static method in class nxopen.uf.UFModl.DfoConstraintType
-
- values() - Static method in class nxopen.uf.UFModl.DfoScaleType
-
- values() - Static method in class nxopen.uf.UFModl.FaceExtension
-
- values() - Static method in class nxopen.uf.UFModl.FeatureSigns
-
- values() - Static method in class nxopen.uf.UFModl.Gflange
-
- values() - Static method in class nxopen.uf.UFModl.GflangeDistort
-
- values() - Static method in class nxopen.uf.UFModl.HoleType
-
- values() - Static method in class nxopen.uf.UFModl.ImportBodyFeatureEditOption
-
- values() - Static method in class nxopen.uf.UFModl.IntersectType
-
- values() - Static method in class nxopen.uf.UFModl.LawextDirref
-
- values() - Static method in class nxopen.uf.UFModl.OffsetTransType
-
- values() - Static method in class nxopen.uf.UFModl.ParmMethod
-
- values() - Static method in class nxopen.uf.UFModl.PocketpadType
-
- values() - Static method in class nxopen.uf.UFModl.ProjType
-
- values() - Static method in class nxopen.uf.UFModl.PunchType
-
- values() - Static method in class nxopen.uf.UFModl.QuiltType
-
- values() - Static method in class nxopen.uf.UFModl.RefitFaceContinuity
-
- values() - Static method in class nxopen.uf.UFModl.RefitFaceFitDirection
-
- values() - Static method in class nxopen.uf.UFModl.RsoSurfCtrlOption
-
- values() - Static method in class nxopen.uf.UFModl.RsoSurfMethod
-
- values() - Static method in class nxopen.uf.UFModl.RsoTrimOption
-
- values() - Static method in class nxopen.uf.UFModl.ScaleType
-
- values() - Static method in class nxopen.uf.UFModl.SecsrfCreMethod
-
- values() - Static method in class nxopen.uf.UFModl.SecsrfParamMethod
-
- values() - Static method in class nxopen.uf.UFModl.SflangeContinuity
-
- values() - Static method in class nxopen.uf.UFModl.SflangeDir
-
- values() - Static method in class nxopen.uf.UFModl.SflangeTrim
-
- values() - Static method in class nxopen.uf.UFModl.SflangeType
-
- values() - Static method in class nxopen.uf.UFModl.SlotType
-
- values() - Static method in class nxopen.uf.UFModl.SmbendAngle
-
- values() - Static method in class nxopen.uf.UFModl.SmbendCurve
-
- values() - Static method in class nxopen.uf.UFModl.SmbendDirection
-
- values() - Static method in class nxopen.uf.UFModl.SmbendRadius
-
- values() - Static method in class nxopen.uf.UFModl.SmbendStatSide
-
- values() - Static method in class nxopen.uf.UFModl.SmcutoutType
-
- values() - Static method in class nxopen.uf.UFModl.SmholeDirectionType
-
- values() - Static method in class nxopen.uf.UFModl.SmholeType
-
- values() - Static method in class nxopen.uf.UFModl.SmpunchTopType
-
- values() - Static method in class nxopen.uf.UFModl.SmslotType
-
- values() - Static method in class nxopen.uf.UFModl.SnipsurfBoundaryType
-
- values() - Static method in class nxopen.uf.UFModl.SnipsurfRefitMethod
-
- values() - Static method in class nxopen.uf.UFModl.State
-
- values() - Static method in class nxopen.uf.UFModl.SweepTrimOpts
-
- values() - Static method in class nxopen.uf.UFModl.SweepTrimSigns
-
- values() - Static method in class nxopen.uf.UFModl.TransformType
-
- values() - Static method in class nxopen.uf.UFModl.TrimBlendOptions
-
- values() - Static method in class nxopen.uf.UFModl.UdfReverseDir
-
- values() - Static method in class nxopen.uf.UFModl.Units
-
- values() - Static method in class nxopen.uf.UFModl.UpdateOption
-
- values() - Static method in class nxopen.uf.UFModl.VectorType
-
- values() - Static method in class nxopen.uf.UFMotion.AngularUnitsType
-
- values() - Static method in class nxopen.uf.UFMotion.AnlGeometryFormat
-
- values() - Static method in class nxopen.uf.UFMotion.ContactForce
-
- values() - Static method in class nxopen.uf.UFMotion.ContactFriction
-
- values() - Static method in class nxopen.uf.UFMotion.ContactMethod
-
- values() - Static method in class nxopen.uf.UFMotion.DispAngle
-
- values() - Static method in class nxopen.uf.UFMotion.FuncComponentType
-
- values() - Static method in class nxopen.uf.UFMotion.FuncRefFrameType
-
- values() - Static method in class nxopen.uf.UFMotion.FuncResultType
-
- values() - Static method in class nxopen.uf.UFMotion.JointCouplerType
-
- values() - Static method in class nxopen.uf.UFMotion.JointMotionInputType
-
- values() - Static method in class nxopen.uf.UFMotion.JointType
-
- values() - Static method in class nxopen.uf.UFMotion.MarkerType
-
- values() - Static method in class nxopen.uf.UFMotion.MeasurementType
-
- values() - Static method in class nxopen.uf.UFMotion.MotionType
-
- values() - Static method in class nxopen.uf.UFMotion.PvExportType
-
- values() - Static method in class nxopen.uf.UFMotion.ReferenceFrame
-
- values() - Static method in class nxopen.uf.UFMotion.Solver
-
- values() - Static method in class nxopen.uf.UFMotion.SpringDamperType
-
- values() - Static method in class nxopen.uf.UFMotion.VectorComponent
-
- values() - Static method in class nxopen.uf.UFMotion.VectorType
-
- values() - Static method in class nxopen.uf.UFNxsm.FeaturePropertyConstants
-
- values() - Static method in class nxopen.uf.UFNxsm.FlangeWidthOption
-
- values() - Static method in class nxopen.uf.UFOper.MachMode
-
- values() - Static method in class nxopen.uf.UFParam.ClrplaneStatus
-
- values() - Static method in class nxopen.uf.UFParam.ClrplaneUsage
-
- values() - Static method in class nxopen.uf.UFParam.ClvRangeType
-
- values() - Static method in class nxopen.uf.UFParam.LwplaneStatus
-
- values() - Static method in class nxopen.uf.UFParam.LwplaneUsage
-
- values() - Static method in class nxopen.uf.UFParam.Regen
-
- values() - Static method in class nxopen.uf.UFParam.Status
-
- values() - Static method in class nxopen.uf.UFParam.TtmoprSubopType
-
- values() - Static method in class nxopen.uf.UFParam.TurnWorkpieceDirection
-
- values() - Static method in class nxopen.uf.UFParam.TurnWorkpieceType
-
- values() - Static method in class nxopen.uf.UFParam.Type
-
- values() - Static method in class nxopen.uf.UFPart.ExportExpMode
-
- values() - Static method in class nxopen.uf.UFPart.ExportParamsMode
-
- values() - Static method in class nxopen.uf.UFPath.ArcMode
-
- values() - Static method in class nxopen.uf.UFPath.Axis
-
- values() - Static method in class nxopen.uf.UFPath.ClampStatus
-
- values() - Static method in class nxopen.uf.UFPath.CoolantType
-
- values() - Static method in class nxopen.uf.UFPath.CutcomMode
-
- values() - Static method in class nxopen.uf.UFPath.CutcomOff
-
- values() - Static method in class nxopen.uf.UFPath.CutcomOn
-
- values() - Static method in class nxopen.uf.UFPath.Direction
-
- values() - Static method in class nxopen.uf.UFPath.DwellUnit
-
- values() - Static method in class nxopen.uf.UFPath.FeedrateMode
-
- values() - Static method in class nxopen.uf.UFPath.FeedUnit
-
- values() - Static method in class nxopen.uf.UFPath.FlushType
-
- values() - Static method in class nxopen.uf.UFPath.Guide
-
- values() - Static method in class nxopen.uf.UFPath.HeadType
-
- values() - Static method in class nxopen.uf.UFPath.MachineMode
-
- values() - Static method in class nxopen.uf.UFPath.MotionType
-
- values() - Static method in class nxopen.uf.UFPath.OpSkip
-
- values() - Static method in class nxopen.uf.UFPath.OutputMode
-
- values() - Static method in class nxopen.uf.UFPath.ParallelMode
-
- values() - Static method in class nxopen.uf.UFPath.PlaneType
-
- values() - Static method in class nxopen.uf.UFPath.Pressure
-
- values() - Static method in class nxopen.uf.UFPath.RotationObject
-
- values() - Static method in class nxopen.uf.UFPath.RotationType
-
- values() - Static method in class nxopen.uf.UFPath.Seqno
-
- values() - Static method in class nxopen.uf.UFPath.Shape
-
- values() - Static method in class nxopen.uf.UFPath.Side
-
- values() - Static method in class nxopen.uf.UFPath.SpindleMode
-
- values() - Static method in class nxopen.uf.UFPath.TankType
-
- values() - Static method in class nxopen.uf.UFPatt.Switch
-
- values() - Static method in class nxopen.uf.UFPd.AttributeType
-
- values() - Static method in class nxopen.uf.UFPd.AttributeValueType
-
- values() - Static method in class nxopen.uf.UFPd.BusModfrType
-
- values - Variable in class nxopen.uf.UFPd.ProductAttribute
-
- values - Variable in class nxopen.uf.UFPd.ProductAttribute2
-
- values() - Static method in class nxopen.uf.UFPd.ProductDefinitionInstanceType
-
- values() - Static method in class nxopen.uf.UFPd.ProductDefinitionLeaderAssocPntType
-
- values() - Static method in class nxopen.uf.UFPlist.ColumnType
-
- values() - Static method in class nxopen.uf.UFPlist.GrowDirection
-
- values() - Static method in class nxopen.uf.UFPlist.LdrMethod
-
- values() - Static method in class nxopen.uf.UFPlist.SymbolType
-
- values() - Static method in class nxopen.uf.UFPlot.CmpColorWidth
-
- values() - Static method in class nxopen.uf.UFPlot.Colors
-
- values() - Static method in class nxopen.uf.UFPlot.CreateCmpResultPlot
-
- values() - Static method in class nxopen.uf.UFPlot.DiffCmpStatus
-
- values() - Static method in class nxopen.uf.UFPlot.Format
-
- values() - Static method in class nxopen.uf.UFPlot.Rotation
-
- values() - Static method in class nxopen.uf.UFPlot.Units
-
- values() - Static method in class nxopen.uf.UFPlot.Widths
-
- values() - Static method in class nxopen.uf.UFProcessAid.Types
-
- values() - Static method in class nxopen.uf.UFScop.TxIntpDataType
-
- values() - Static method in class nxopen.uf.UFScop.TxIntpMethod
-
- values() - Static method in class nxopen.uf.UFSetup.OutputUnits
-
- values() - Static method in class nxopen.uf.UFSf.AssemblyType
-
- values() - Static method in class nxopen.uf.UFSf.DursolDesignLifeCriterion
-
- values() - Static method in class nxopen.uf.UFSf.DursolFatigueLifeCriterion
-
- values() - Static method in class nxopen.uf.UFSf.DursolStressCriterion
-
- values() - Static method in class nxopen.uf.UFSf.DursolStressType
-
- values() - Static method in class nxopen.uf.UFSf.EdgeDensityType
-
- values() - Static method in class nxopen.uf.UFSf.ElementType
-
- values() - Static method in class nxopen.uf.UFSf.ElmAdaptivityType
-
- values() - Static method in class nxopen.uf.UFSf.ElmDimensionType
-
- values() - Static method in class nxopen.uf.UFSf.FaceSubdivStatus
-
- values() - Static method in class nxopen.uf.UFSf.FemValueType
-
- values() - Static method in class nxopen.uf.UFSf.IdealizeParmExp
-
- values() - Static method in class nxopen.uf.UFSf.IdealizeParmFace
-
- values() - Static method in class nxopen.uf.UFSf.LangAnalysisType
-
- values() - Static method in class nxopen.uf.UFSf.LangLinearity
-
- values() - Static method in class nxopen.uf.UFSf.LangProblemAbstract
-
- values() - Static method in class nxopen.uf.UFSf.LangTimeDepend
-
- values() - Static method in class nxopen.uf.UFSf.LibraryMaterial
-
- values() - Static method in class nxopen.uf.UFSf.LvFunctionMode
-
- values() - Static method in class nxopen.uf.UFSf.McResultFormat
-
- values() - Static method in class nxopen.uf.UFSf.MeshDimension
-
- values() - Static method in class nxopen.uf.UFSf.MeshErrorType
-
- values() - Static method in class nxopen.uf.UFSf.MeshGeometryTypes
-
- values() - Static method in class nxopen.uf.UFSf.MeshGeomMeshdir
-
- values() - Static method in class nxopen.uf.UFSf.MeshGeomUsage
-
- values() - Static method in class nxopen.uf.UFSf.MidNodeType
-
- values() - Static method in class nxopen.uf.UFSf.MultiPropType
-
- values() - Static method in class nxopen.uf.UFSf.NeutralMaterialTypes
-
- values() - Static method in class nxopen.uf.UFSf.NodeBtype
-
- values() - Static method in class nxopen.uf.UFSf.NodeSwitch
-
- values() - Static method in class nxopen.uf.UFSf.ScenarioInfo
-
- values() - Static method in class nxopen.uf.UFSf.Sf0dDensityType
-
- values() - Static method in class nxopen.uf.UFSf.Sf0dElementType
-
- values() - Static method in class nxopen.uf.UFSf.Sf1dDensityType
-
- values() - Static method in class nxopen.uf.UFSf.Sf1dElementType
-
- values() - Static method in class nxopen.uf.UFSf.Ugs2dMesherElemType
-
- values() - Static method in class nxopen.uf.UFSf.UgsAbstractionFilletTypeOption
-
- values() - Static method in class nxopen.uf.UFSf.UgsMesherMidnodeOption
-
- values() - Static method in class nxopen.uf.UFSf.UgsTetMeshFilletTypeOption
-
- values - Variable in class nxopen.uf.UFSfLegend.IndexColorAttr
-
- values() - Static method in class nxopen.uf.UFSfLegend.TextJustification
-
- values() - Static method in class nxopen.uf.UFSfPost.LayoutType
-
- values() - Static method in class nxopen.uf.UFSfPost.Target
-
- values() - Static method in class nxopen.uf.UFSim.AxisRotDirType
-
- values() - Static method in class nxopen.uf.UFSim.CuttingMode
-
- values() - Static method in class nxopen.uf.UFSim.KimDegOfTypes
-
- values() - Static method in class nxopen.uf.UFSim.SvKimDegofDirection
-
- values() - Static method in class nxopen.uf.UFSim.ToolClass
-
- values() - Static method in class nxopen.uf.UFSim.UnitType
-
- values() - Static method in class nxopen.uf.UFSket.AssocType
-
- values() - Static method in class nxopen.uf.UFSket.ConClass
-
- values() - Static method in class nxopen.uf.UFSket.ConType
-
- values() - Static method in class nxopen.uf.UFSket.GeomVertex
-
- values() - Static method in class nxopen.uf.UFSket.HelpType
-
- values() - Static method in class nxopen.uf.UFSket.ReferenceStatus
-
- values() - Static method in class nxopen.uf.UFSket.Status
-
- values() - Static method in class nxopen.uf.UFSmd.AngleTypeE
-
- values() - Static method in class nxopen.uf.UFSmd.BafOptionsE
-
- values() - Static method in class nxopen.uf.UFSmd.BatAngleTypeE
-
- values() - Static method in class nxopen.uf.UFSmd.BatRadiusTypeE
-
- values() - Static method in class nxopen.uf.UFSmd.FormingMethodE
-
- values() - Static method in class nxopen.uf.UFSmd.PipSequentialE
-
- values() - Static method in class nxopen.uf.UFSmd.PipTypeEnumE
-
- values() - Static method in class nxopen.uf.UFSmd.RadiusTypeE
-
- values() - Static method in class nxopen.uf.UFSo.DirrOnCurveOption
-
- values() - Static method in class nxopen.uf.UFSo.PointAlongCurveOption
-
- values() - Static method in class nxopen.uf.UFSo.ScalarDimOption
-
- values() - Static method in class nxopen.uf.UFSo.UpdateOption
-
- values() - Static method in class nxopen.uf.UFSo.VisibilityOption
-
- values() - Static method in class nxopen.uf.UFStudio.StybldCont
-
- values() - Static method in class nxopen.uf.UFStudio.StybldDirect
-
- values() - Static method in class nxopen.uf.UFStudio.StybldMethod
-
- values() - Static method in class nxopen.uf.UFStudio.StybldMinrad
-
- values() - Static method in class nxopen.uf.UFStudio.StybldStiff
-
- values() - Static method in class nxopen.uf.UFStudio.StybldTrans
-
- values() - Static method in class nxopen.uf.UFStudio.StybldTrim
-
- values() - Static method in class nxopen.uf.UFStudio.StybldVDegree
-
- values() - Static method in class nxopen.uf.UFSubdiv.Type
-
- values() - Static method in class nxopen.uf.UFSurfReg.Type
-
- values() - Static method in class nxopen.uf.UFTabnot.AttachPoint
-
- values() - Static method in class nxopen.uf.UFTabnot.DisplayContinuationNote
-
- values() - Static method in class nxopen.uf.UFTabnot.FitMethod
-
- values() - Static method in class nxopen.uf.UFTabnot.Format
-
- values() - Static method in class nxopen.uf.UFTabnot.HeaderLocation
-
- values() - Static method in class nxopen.uf.UFTabnot.Just
-
- values() - Static method in class nxopen.uf.UFTabnot.OverflowDirection
-
- values() - Static method in class nxopen.uf.UFTabnot.SortDirection
-
- values() - Static method in class nxopen.uf.UFTabnot.ZeroDisplay
-
- values() - Static method in class nxopen.uf.UFText.ModeS
-
- values() - Static method in class nxopen.uf.UFTurn.CutRegionsLocation
-
- values() - Static method in class nxopen.uf.UFUde.ParamToggle
-
- values() - Static method in class nxopen.uf.UFUde.ParamType
-
- values() - Static method in class nxopen.uf.UFUde.SetType
-
- values() - Static method in class nxopen.uf.UFUdop.Purpose
-
- values() - Static method in class nxopen.uf.UFUgfont.Type
-
- values() - Static method in class nxopen.uf.UFUgmgr.AltIdStatus
-
- values() - Static method in class nxopen.uf.UFUgmgr.ObjectType
-
- values() - Static method in class nxopen.uf.UFUgmgr.PartnoStatus
-
- values() - Static method in class nxopen.uf.UFUi.DialogDirId
-
- values() - Static method in class nxopen.uf.UFUi.DialogFilterId
-
- values() - Static method in class nxopen.uf.UFUi.FunType
-
- values() - Static method in class nxopen.uf.UFUi.MenuType
-
- values() - Static method in class nxopen.uf.UFUi.MessageDialogType
-
- values() - Static method in class nxopen.uf.UFUi.PointBaseMethod
-
- values() - Static method in class nxopen.uf.UFUiOnt.TreeMode
-
- values() - Static method in class nxopen.uf.UFUndo.UserVisibility
-
- values() - Static method in class nxopen.uf.UFView.CycleObjects
-
- values() - Static method in class nxopen.uf.UFView.HiddenEdgeStyle
-
- values() - Static method in class nxopen.uf.UFView.LightBeamFallOff
-
- values() - Static method in class nxopen.uf.UFView.LightDetail
-
- values() - Static method in class nxopen.uf.UFView.LightEdge
-
- values() - Static method in class nxopen.uf.UFView.LightFallOff
-
- values() - Static method in class nxopen.uf.UFView.LightIntensityFactor
-
- values() - Static method in class nxopen.uf.UFView.LightMode
-
- values() - Static method in class nxopen.uf.UFView.LightType
-
- values() - Static method in class nxopen.uf.UFView.RenderingStyle
-
- values() - Static method in class nxopen.uf.UFView.ShadedEdgeStyle
-
- values() - Static method in class nxopen.uf.UFView.SmoothEdges
-
- values() - Static method in class nxopen.uf.UFView.StandardOrientation
-
- values() - Static method in class nxopen.uf.UFView.Subtype
-
- values() - Static method in class nxopen.uf.UFView.Type
-
- values() - Static method in class nxopen.uf.UFView.VdeType
-
- values() - Static method in class nxopen.uf.UFWave.DelayStatus
-
- values() - Static method in class nxopen.uf.UFWeight.ExceptionReason
-
- values() - Static method in class nxopen.uf.UFWeight.StateType
-
- values() - Static method in class nxopen.uf.UFWeight.UnitsType
-
- values() - Static method in class nxopen.uf.UFWeld.Types
-
- values() - Static method in class nxopen.UI.Status
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.uistyler.Attachment.AttachType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.uistyler.Dialog.ItemType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.uistyler.DialogIndex
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.uistyler.DialogItem.DialogItemIndex
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.uistyler.DialogResponse
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.uistyler.DialogState
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.uistyler.FileOperationData.FileOperationState
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.uistyler.FileOperationData.FileOperationType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.uistyler.StylerEvent.Indicator
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.uistyler.StylerEvent.Miscellaneous
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.uistyler.StylerEvent.Reason
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.uistyler.StylerItem.ItemType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.Update.FailureOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.Update.Option
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.userdefinedobjects.UserDefinedClass.AllowOwnedObjectSelection
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.userdefinedobjects.UserDefinedClass.AllowQueryClass
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.userdefinedobjects.UserDefinedClass.Selection
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.userdefinedobjects.UserDefinedEvent.Reason
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.userdefinedobjects.UserDefinedObject.LinkStatus
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.userdefinedobjects.UserDefinedObject.LinkType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.FacetType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.StandardTextRef
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.TextRef
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.TextSize
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.ViewMode
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.userdefinedtemplate.InstantiationBuilder.JaUserdefinedtemplateLayerOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.validate.OverrideBuilder.DecisionActions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.validate.OverrideBuilder.RequestTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.validate.OverrideBuilder.ToStates
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.validate.Parser.DataSourceTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.validate.RequirementBuilder.DataTypeOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.validate.RequirementBuilder.DefinitionMethodOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.validate.RequirementBuilder.RelationalOperatorOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.validate.RequirementBuilder.SeverityOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.validate.RequirementCheck.SaveResultsToTeamcenterOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.validate.RequirementCollection.SourceTypeOptions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.validate.ResultObject.ResultTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.validate.ValidatorOptions.LogModeTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.validate.ValidatorOptions.ResultsDisplayModeTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.validate.ValidatorOptions.SaveModeTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.validate.XmlComparator.Result
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.Validation.InputType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.Validation.MapType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.Validation.Result
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.Validation.UpdateTime
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.View.Canned
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.View.RenderingStyleType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.View.ScaleAdjustment
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.View.ScaleFactor
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.View.ShowOrHideType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.ViewDependentDisplayManager.Font
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.ViewDependentDisplayManager.PartialShading
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.ViewDependentDisplayManager.Translucency
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.ViewDependentDisplayManager.Width
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.visualreporting.Classifier.DateGroupMethodOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.visualreporting.Classifier.GroupingMethodOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.visualreporting.Classifier.RangeMethodOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.visualreporting.Classifier.TypeOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.visualreporting.Condition.OperatorOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.visualreporting.Condition.TypeOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.visualreporting.GroupLabel.DisplayStyleOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.visualreporting.GroupLabel.TagPriorityOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.visualreporting.Property.DatatypeOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.visualreporting.Property.TypeOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.visualreporting.VisualReportExplorer.ExploreReportOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.visualreporting.VisualReportExplorer.ReportDownStatus
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.visualreporting.VisualReportExplorer.ReportOnObjectsOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.VRMLImporter.AngularToleranceType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.VRMLImporter.FileUnitsType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.WCS.Axis
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.AutoPointBuilder.InterferenceDetails
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.AutoPointBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.CharacteristicsBuilder.Type
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.CharacteristicsValueBuilder.Type
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.ConnectionFinderBuilder.FilterTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.DatumCommonBuilder.ControlMethodTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.DatumCommonBuilder.CreationDirectionMethods
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.DatumCommonBuilder.CustomTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.DatumCommonBuilder.SolidTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.DatumSurfaceBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.EasyPatternBuilder.HemMethodTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.EasyPatternBuilder.PlaneMethodTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.EasyPatternBuilder.SpacingMethodTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.EasyPatternBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.EdgePrepValuesBuilder.Apply
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.EdgePrepValuesBuilder.Option
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.ExportWeldBuilder.AttributeOriginType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.ExportWeldBuilder.OutputType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.FilletBuilder.EnumConstructionMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.FilletBuilder.EnumContour
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.FilletBuilder.EnumExtendEdges
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.FilletBuilder.EnumExtensionMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.FilletBuilder.EnumSkipWeldMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.FilletBuilder.EnumWeldingType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.InformationBuilder.AttributeOriginType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.JointExitBuilder.BodySide
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.JointExitBuilder.Positions
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.JointmarkBuilder.ConnectedPanelTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.JointmarkBuilder.Method
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.JointmarkBuilder.OrientationMethodTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.JointmarkBuilder.ReferenceSheetTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.JointmarkGuideBuilder.Location
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.JointmarkGuideBuilder.SpaceMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.JointmarkGuideBuilder.SpaceOption
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.JointmarkPointsBuilder.PointPosition
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.OutputType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.PlugSlotBuilder.ArcProcessEnum
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.PlugSlotBuilder.EnumContour
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.PointMarkBuilder.WeldTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.SurfaceWeldBuilder.DestinationTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.WeldAdvisorCheckerType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.WeldAdvisorCustomerDefault
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.WeldArcMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.WeldAttribType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.WeldBeadBuilder.BeadLocationMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.WeldBeadBuilder.OutputTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.WeldBeadBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.WeldBeadPathBuilder.OffsetMethodType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.WeldCustom
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.WeldFacesetIndex
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.WeldFeatureOutput
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.WeldFeatureSetType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.WeldFillBuilder.BoundaryMethodType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.WeldFillBuilder.WidthAlongType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.WeldGrooveBuilder.Contour
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.WeldGrooveBuilder.Edge
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.WeldGrooveBuilder.Prepare
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.WeldGrooveBuilder.SkipWeldMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.WeldGrooveBuilder.Taper
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.WeldGrooveBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.WeldGrooveExtension
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.WeldGrooveType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.WeldGroupIdColor
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.WeldJointBuilder.Application
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.WeldJointBuilder.CoordinateSystem
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.WeldJointBuilder.DestinationTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.WeldJointBuilder.SplitTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.WeldJointBuilder.Types
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.WeldJointBuilder.WeldTypes
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.WeldLabelBuilder.OrientationPlaneType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.WeldMeasurementSizeMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.WeldObjectBuilder.CommandName
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.WeldOverlapStatus
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.WeldParasetLocation
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.WeldPmiBuilder.OrientationPlaneType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.WeldPointExitBuilder.CommandName
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.WeldPointExitBuilder.MethodUsed
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.WeldPointExtendMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.WeldPointLocation
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.WeldPointMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.WeldPointReferenceSheetType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.WeldPointSpacingMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.WeldPrepareEdges
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.WeldProjectionMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.WeldRootUpdate
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.WeldSelectionType
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.WeldSpacingCalcMethod
-
Returns an array that contains the values for this enum.
- values() - Static method in class nxopen.weld.WeldTaperMethod
-
Returns an array that contains the values for this enum.
- valuesApplyOption() - Method in interface nxopen.weld.EdgePrepValuesBuilder
-
Returns the apply values option which indicates whether the all the values of each selected joint should be updated or just the values that were changed in the
JointExitBuilder
.
- valuesConcatenated() - Method in interface nxopen.blockstyler.MultilineString
-
Returns the ValuesConcatenated.
- valuesCount - Variable in class nxopen.optimization.DesignStudyBuilder.DesignStudyVariable
-
Values count
- valueSegment() - Method in interface nxopen.weld.EdgePrepValuesBuilder
-
Returns the selected segment.
- valueShareingCriterion - Variable in class nxopen.cae.Post.GraphParameters
-
- valueShareingCriterion - Variable in class nxopen.cae.Post.StreamlineData
-
- valuesOption() - Method in interface nxopen.weld.EdgePrepValuesBuilder
-
Returns the values option which indicates whether the entered or computed values should be used.
- valueStr - Variable in class nxopen.uf.UFKf.AskValueOfListItemData
-
- valueString() - Method in interface nxopen.weld.CharacteristicsValueBuilder
-
Returns the value of this attribute when AttributeType is Weld.CharacteristicsValueBuilder.Type#STRING
or
Weld.CharacteristicsValueBuilder.Type#OPTION
.
- valueTitle - Variable in class nxopen.uf.UFPd.AttributeValue
-
- valueType() - Method in interface nxopen.cae.BaseIteration
-
Returns the iteration value type
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- valuetype - Variable in class nxopen.cae.Result.AskResultLoadcaseValueData
-
- valueType() - Method in interface nxopen.issue.IssueProperty
-
Returns the property type
License requirements: nx_issue_mgmt ("NX Issue Tracking")
.
- valueType() - Method in interface nxopen.motion.ScalarForceBuilder
-
Returns the value type
License requirements: None.
- valueType() - Method in interface nxopen.motion.ScalarTorqueBuilder
-
Returns the value type
License requirements: None.
- valueType() - Method in interface nxopen.motion.VObject
-
Returns the value type
License requirements: None.
- valueType - Variable in class nxopen.uf.UFPd.AttributeValue
-
- ValueWithCaeSetObjectInfoData() - Constructor for class nxopen.annotations.SelectDimension.ValueWithCaeSetObjectInfoData
-
- ValueWithCaeSetObjectInfoData() - Constructor for class nxopen.assemblies.SelectComponent.ValueWithCaeSetObjectInfoData
-
- ValueWithCaeSetObjectInfoData() - Constructor for class nxopen.cae.SelectCAEBody.ValueWithCaeSetObjectInfoData
-
- ValueWithCaeSetObjectInfoData() - Constructor for class nxopen.cae.SelectCAEEdge.ValueWithCaeSetObjectInfoData
-
- ValueWithCaeSetObjectInfoData() - Constructor for class nxopen.cae.SelectCAEFace.ValueWithCaeSetObjectInfoData
-
- ValueWithCaeSetObjectInfoData() - Constructor for class nxopen.drawings.SelectDraftingView.ValueWithCaeSetObjectInfoData
-
- ValueWithCaeSetObjectInfoData() - Constructor for class nxopen.drawings.SelectDrawingRegion.ValueWithCaeSetObjectInfoData
-
- ValueWithCaeSetObjectInfoData() - Constructor for class nxopen.drawings.SelectDrawingView.ValueWithCaeSetObjectInfoData
-
- ValueWithCaeSetObjectInfoData() - Constructor for class nxopen.drawings.SelectSectionLine.ValueWithCaeSetObjectInfoData
-
- ValueWithCaeSetObjectInfoData() - Constructor for class nxopen.facet.SelectFacetedBody.ValueWithCaeSetObjectInfoData
-
- ValueWithCaeSetObjectInfoData() - Constructor for class nxopen.features.SelectFlatPattern.ValueWithCaeSetObjectInfoData
-
- ValueWithCaeSetObjectInfoData() - Constructor for class nxopen.features.SelectPartModule.ValueWithCaeSetObjectInfoData
-
- ValueWithCaeSetObjectInfoData() - Constructor for class nxopen.layout2d.SelectComponent.ValueWithCaeSetObjectInfoData
-
- ValueWithCaeSetObjectInfoData() - Constructor for class nxopen.mechatronics.SelectAdapterSignal.ValueWithCaeSetObjectInfoData
-
- ValueWithCaeSetObjectInfoData() - Constructor for class nxopen.mechatronics.SelectCollisionSensor.ValueWithCaeSetObjectInfoData
-
- ValueWithCaeSetObjectInfoData() - Constructor for class nxopen.mechatronics.SelectPhysicsConstraint.ValueWithCaeSetObjectInfoData
-
- ValueWithCaeSetObjectInfoData() - Constructor for class nxopen.mechatronics.SelectPhysicsJoint.ValueWithCaeSetObjectInfoData
-
- ValueWithCaeSetObjectInfoData() - Constructor for class nxopen.mechatronics.SelectRigidBody.ValueWithCaeSetObjectInfoData
-
- ValueWithCaeSetObjectInfoData() - Constructor for class nxopen.mechatronics.SelectSystemObject.ValueWithCaeSetObjectInfoData
-
- ValueWithCaeSetObjectInfoData() - Constructor for class nxopen.mechatronics.SelectTagFormObject.ValueWithCaeSetObjectInfoData
-
- ValueWithCaeSetObjectInfoData() - Constructor for class nxopen.motion.SelectJoint.ValueWithCaeSetObjectInfoData
-
- ValueWithCaeSetObjectInfoData() - Constructor for class nxopen.motion.SelectLink.ValueWithCaeSetObjectInfoData
-
- ValueWithCaeSetObjectInfoData() - Constructor for class nxopen.motion.SelectMarker.ValueWithCaeSetObjectInfoData
-
- ValueWithCaeSetObjectInfoData() - Constructor for class nxopen.routing.SelectControlPoint.ValueWithCaeSetObjectInfoData
-
- ValueWithCaeSetObjectInfoData() - Constructor for class nxopen.routing.SelectISegment.ValueWithCaeSetObjectInfoData
-
- ValueWithCaeSetObjectInfoData() - Constructor for class nxopen.routing.SelectLineSegment.ValueWithCaeSetObjectInfoData
-
- ValueWithCaeSetObjectInfoData() - Constructor for class nxopen.routing.SelectRun.ValueWithCaeSetObjectInfoData
-
- ValueWithCaeSetObjectInfoData() - Constructor for class nxopen.routing.SelectStock.ValueWithCaeSetObjectInfoData
-
- ValueWithCaeSetObjectInfoData() - Constructor for class nxopen.SelectBody.ValueWithCaeSetObjectInfoData
-
- ValueWithCaeSetObjectInfoData() - Constructor for class nxopen.SelectCartesianCoordinateSystem.ValueWithCaeSetObjectInfoData
-
- ValueWithCaeSetObjectInfoData() - Constructor for class nxopen.SelectCoordinateSystem.ValueWithCaeSetObjectInfoData
-
- ValueWithCaeSetObjectInfoData() - Constructor for class nxopen.SelectCurve.ValueWithCaeSetObjectInfoData
-
- ValueWithCaeSetObjectInfoData() - Constructor for class nxopen.SelectDatumPlane.ValueWithCaeSetObjectInfoData
-
- ValueWithCaeSetObjectInfoData() - Constructor for class nxopen.SelectDisplayableObject.ValueWithCaeSetObjectInfoData
-
- ValueWithCaeSetObjectInfoData() - Constructor for class nxopen.SelectEdge.ValueWithCaeSetObjectInfoData
-
- ValueWithCaeSetObjectInfoData() - Constructor for class nxopen.SelectFace.ValueWithCaeSetObjectInfoData
-
- ValueWithCaeSetObjectInfoData() - Constructor for class nxopen.SelectIBaseCurve.ValueWithCaeSetObjectInfoData
-
- ValueWithCaeSetObjectInfoData() - Constructor for class nxopen.SelectICurve.ValueWithCaeSetObjectInfoData
-
- ValueWithCaeSetObjectInfoData() - Constructor for class nxopen.SelectIParameterizedSurface.ValueWithCaeSetObjectInfoData
-
- ValueWithCaeSetObjectInfoData() - Constructor for class nxopen.SelectISurface.ValueWithCaeSetObjectInfoData
-
- ValueWithCaeSetObjectInfoData() - Constructor for class nxopen.SelectLine.ValueWithCaeSetObjectInfoData
-
- ValueWithCaeSetObjectInfoData() - Constructor for class nxopen.SelectNXObject.ValueWithCaeSetObjectInfoData
-
- ValueWithCaeSetObjectInfoData() - Constructor for class nxopen.SelectObject.ValueWithCaeSetObjectInfoData
-
- ValueWithCaeSetObjectInfoData() - Constructor for class nxopen.SelectPart.ValueWithCaeSetObjectInfoData
-
- ValueWithCaeSetObjectInfoData() - Constructor for class nxopen.SelectPoint.ValueWithCaeSetObjectInfoData
-
- ValueWithCaeSetObjectInfoData() - Constructor for class nxopen.SelectSketch.ValueWithCaeSetObjectInfoData
-
- ValueWithCaeSetObjectInfoData() - Constructor for class nxopen.SelectSmartObject.ValueWithCaeSetObjectInfoData
-
- ValueWithCaeSetObjectInfoData() - Constructor for class nxopen.SelectSpline.ValueWithCaeSetObjectInfoData
-
- ValueWithCaeSetObjectInfoData() - Constructor for class nxopen.SelectTaggedObject.ValueWithCaeSetObjectInfoData
-
- ValueWithCaeSetObjectInfoData() - Constructor for class nxopen.SelectView.ValueWithCaeSetObjectInfoData
-
- ValueWithCaeSetObjectInfoData() - Constructor for class nxopen.weld.SelectDatumPin.ValueWithCaeSetObjectInfoData
-
- ValueWithCaeSetObjectInfoData() - Constructor for class nxopen.weld.SelectDatumSurface.ValueWithCaeSetObjectInfoData
-
- ValueWithSnapData() - Constructor for class nxopen.annotations.SelectDimension.ValueWithSnapData
-
- ValueWithSnapData() - Constructor for class nxopen.assemblies.SelectComponent.ValueWithSnapData
-
- ValueWithSnapData() - Constructor for class nxopen.cae.SelectCAEBody.ValueWithSnapData
-
- ValueWithSnapData() - Constructor for class nxopen.cae.SelectCAEEdge.ValueWithSnapData
-
- ValueWithSnapData() - Constructor for class nxopen.cae.SelectCAEFace.ValueWithSnapData
-
- ValueWithSnapData() - Constructor for class nxopen.drawings.SelectDraftingView.ValueWithSnapData
-
- ValueWithSnapData() - Constructor for class nxopen.drawings.SelectDrawingRegion.ValueWithSnapData
-
- ValueWithSnapData() - Constructor for class nxopen.drawings.SelectDrawingView.ValueWithSnapData
-
- ValueWithSnapData() - Constructor for class nxopen.drawings.SelectSectionLine.ValueWithSnapData
-
- ValueWithSnapData() - Constructor for class nxopen.facet.SelectFacetedBody.ValueWithSnapData
-
- ValueWithSnapData() - Constructor for class nxopen.features.SelectFlatPattern.ValueWithSnapData
-
- ValueWithSnapData() - Constructor for class nxopen.features.SelectPartModule.ValueWithSnapData
-
- ValueWithSnapData() - Constructor for class nxopen.layout2d.SelectComponent.ValueWithSnapData
-
- ValueWithSnapData() - Constructor for class nxopen.mechatronics.SelectAdapterSignal.ValueWithSnapData
-
- ValueWithSnapData() - Constructor for class nxopen.mechatronics.SelectCollisionSensor.ValueWithSnapData
-
- ValueWithSnapData() - Constructor for class nxopen.mechatronics.SelectPhysicsConstraint.ValueWithSnapData
-
- ValueWithSnapData() - Constructor for class nxopen.mechatronics.SelectPhysicsJoint.ValueWithSnapData
-
- ValueWithSnapData() - Constructor for class nxopen.mechatronics.SelectRigidBody.ValueWithSnapData
-
- ValueWithSnapData() - Constructor for class nxopen.mechatronics.SelectSystemObject.ValueWithSnapData
-
- ValueWithSnapData() - Constructor for class nxopen.mechatronics.SelectTagFormObject.ValueWithSnapData
-
- ValueWithSnapData() - Constructor for class nxopen.motion.SelectJoint.ValueWithSnapData
-
- ValueWithSnapData() - Constructor for class nxopen.motion.SelectLink.ValueWithSnapData
-
- ValueWithSnapData() - Constructor for class nxopen.motion.SelectMarker.ValueWithSnapData
-
- ValueWithSnapData() - Constructor for class nxopen.routing.SelectControlPoint.ValueWithSnapData
-
- ValueWithSnapData() - Constructor for class nxopen.routing.SelectISegment.ValueWithSnapData
-
- ValueWithSnapData() - Constructor for class nxopen.routing.SelectLineSegment.ValueWithSnapData
-
- ValueWithSnapData() - Constructor for class nxopen.routing.SelectRun.ValueWithSnapData
-
- ValueWithSnapData() - Constructor for class nxopen.routing.SelectStock.ValueWithSnapData
-
- ValueWithSnapData() - Constructor for class nxopen.SelectBody.ValueWithSnapData
-
- ValueWithSnapData() - Constructor for class nxopen.SelectCartesianCoordinateSystem.ValueWithSnapData
-
- ValueWithSnapData() - Constructor for class nxopen.SelectCoordinateSystem.ValueWithSnapData
-
- ValueWithSnapData() - Constructor for class nxopen.SelectCurve.ValueWithSnapData
-
- ValueWithSnapData() - Constructor for class nxopen.SelectDatumPlane.ValueWithSnapData
-
- ValueWithSnapData() - Constructor for class nxopen.SelectDisplayableObject.ValueWithSnapData
-
- ValueWithSnapData() - Constructor for class nxopen.SelectEdge.ValueWithSnapData
-
- ValueWithSnapData() - Constructor for class nxopen.SelectFace.ValueWithSnapData
-
- ValueWithSnapData() - Constructor for class nxopen.SelectIBaseCurve.ValueWithSnapData
-
- ValueWithSnapData() - Constructor for class nxopen.SelectICurve.ValueWithSnapData
-
- ValueWithSnapData() - Constructor for class nxopen.SelectIParameterizedSurface.ValueWithSnapData
-
- ValueWithSnapData() - Constructor for class nxopen.SelectISurface.ValueWithSnapData
-
- ValueWithSnapData() - Constructor for class nxopen.SelectLine.ValueWithSnapData
-
- ValueWithSnapData() - Constructor for class nxopen.SelectNXObject.ValueWithSnapData
-
- ValueWithSnapData() - Constructor for class nxopen.SelectObject.ValueWithSnapData
-
- ValueWithSnapData() - Constructor for class nxopen.SelectPart.ValueWithSnapData
-
- ValueWithSnapData() - Constructor for class nxopen.SelectPoint.ValueWithSnapData
-
- ValueWithSnapData() - Constructor for class nxopen.SelectSketch.ValueWithSnapData
-
- ValueWithSnapData() - Constructor for class nxopen.SelectSmartObject.ValueWithSnapData
-
- ValueWithSnapData() - Constructor for class nxopen.SelectSpline.ValueWithSnapData
-
- ValueWithSnapData() - Constructor for class nxopen.SelectTaggedObject.ValueWithSnapData
-
- ValueWithSnapData() - Constructor for class nxopen.SelectView.ValueWithSnapData
-
- ValueWithSnapData() - Constructor for class nxopen.weld.SelectDatumPin.ValueWithSnapData
-
- ValueWithSnapData() - Constructor for class nxopen.weld.SelectDatumSurface.ValueWithSnapData
-
- VANDERWAALS - Static variable in class nxopen.PhysicalMaterial.Type
-
Van Der Waals
- vangle1() - Method in interface nxopen.features.sheetmetal.ClosedCornerBuilder
-
Returns the angle1 of V relief.
- vangle2() - Method in interface nxopen.features.sheetmetal.ClosedCornerBuilder
-
Returns the angle2 of V relief.
- VAPOR_TO_DRY_AIR_MASS_RATIO - Static variable in class nxopen.cae.Result.Quantity
-
- VAR_BREAK - Static variable in class nxopen.cam.ChipControl.Types
-
Chip control mode: Variable Break
- VAR_CLEAR - Static variable in class nxopen.cam.ChipControl.Types
-
Chip control mode: Variable Clear
- varEdges - Variable in class nxopen.uf.UFModl.EdgeBlendMultData
-
- VARIABLE - Static variable in class nxopen.cam.BoundaryTurnMemberOffset.MethodType
-
- VARIABLE - Static variable in class nxopen.cam.CenterlineDrillTurningBuilder.RemovalIncrementTypes
-
Removal Increment Type: Variable
- VARIABLE - Static variable in class nxopen.cam.DmCmBuilder.ContactPositionRingHeightType
-
variable
- VARIABLE - Static variable in class nxopen.features.AOCSBuilder.OffsetDistanceType
-
variable offset
- VARIABLE - Static variable in class nxopen.features.CircularBlendCurveBuilder.CylinderDirectionOption
-
Variable method
- VARIABLE - Static variable in class nxopen.tooling.BlendCurve3DBuilder.BlendCurveOptions
-
Create blend curve by variable method
- VARIABLE - Static variable in class nxopen.tooling.PiercingInsertBuilder.NormalClearanceOptionType
-
The design option is fineblanking
- VARIABLE_AVERAGE - Static variable in class nxopen.cam.StepoverBuilder.StepoverTypes
-
Variable Average
- VARIABLE_MAXIMUM - Static variable in class nxopen.cam.StepoverBuilder.StepoverTypes
-
Variable Maximum
- variableAngleData() - Method in interface nxopen.features.DraftBuilder
-
Returns the Data object for Variable Angle Draft
License requirements: solid_modeling ("SOLIDS MODELING")
.
- variableBevelHandler(WeldJointBuilder, Curve) - Method in interface nxopen.weld.CustomManager.VariableBevelHandler
-
User defined method that returns the angle divisions for a variable bevel.
- variableBounds() - Method in interface nxopen.fields.FieldVariable
-
Returns the variable's minimum and maximum bounds.
- VariableData() - Constructor for class nxopen.cae.optimization.DAODesignVariableBuilder.VariableData
-
- variableExpression - Variable in class nxopen.cae.optimization.DAODesignVariableBuilder.VariableData
-
Variable expression
- variableIncrement() - Method in interface nxopen.cam.ChipControl
-
Returns the Variable Increment
License requirements: None.
- variableIncrementList() - Method in interface nxopen.cam.CenterlineDrillTurningBuilder
-
Returns the variable increment list
License requirements: None.
- VariableIncrementListData() - Constructor for class nxopen.cam.CenterlineDrillVariableIncrementBuilder.VariableIncrementListData
-
- variableLowerLimitValue - Variable in class nxopen.optimization.DesignStudyBuilder.DesignStudyVariable
-
Lower limit value
- variableLowerLimitValue - Variable in class nxopen.optimization.OptimizationBuilder.OptimizationVariable
-
Lower limit value
- variableMaximumBuilder() - Method in interface nxopen.cam.StepoverBuilder
-
Returns the variable maximum builder
License requirements: None.
- variableMaximumOnlyBuilder() - Method in interface nxopen.cam.StepoverBuilder
-
Returns the variable maximum only builder
License requirements: None.
- variableMinimumBuilder() - Method in interface nxopen.cam.StepoverBuilder
-
Returns the variable minimum builder
License requirements: None.
- VariableOffset - Interface in nxopen.features
-
Represents a variable offset feature
To create or edit an instance of this class, use
VariableOffsetBuilder
Created in NX8.0.0
- VariableOffsetBuilder - Interface in nxopen.features
-
- VariableOffsetBuilder.MethodOptions - Class in nxopen.features
-
offset methods for creating the new surface
- VariableRadiusData() - Constructor for class nxopen.features.EdgeBlendBuilder.VariableRadiusData
-
- VariableRadiusDataNewData() - Constructor for class nxopen.features.EdgeBlendBuilder.VariableRadiusDataNewData
-
- VariableRadiusPointsBuilder - Interface in nxopen.features
-
- VariableRadiusPointsBuilderList - Interface in nxopen.features
-
Represents a list of objects.
- variableType - Variable in class nxopen.cae.optimization.DAODesignVariableBuilder.VariableData
-
Variable type
- variableType() - Method in interface nxopen.cae.optimization.TBSDesignResponseBuilder
-
Returns the varialbe type
License requirements: None.
- variableType() - Method in interface nxopen.fields.FieldVariable
-
Returns the type of variable.
- variableType - Variable in class nxopen.optimization.DesignStudyBuilder.DesignStudyVariable
-
Variable type
- variableType - Variable in class nxopen.optimization.OptimizationBuilder.OptimizationVariable
-
Variable type
- variabletype - Variable in class nxopen.sim.IsvControlPanelBuilder.MachineControlReadVariableData
-
The variable type: VDI_SWITCH, VDI_INTEGER, VDI_SINGLESTEP
- variableUpperLimitValue - Variable in class nxopen.optimization.DesignStudyBuilder.DesignStudyVariable
-
Upper limit value
- variableUpperLimitValue - Variable in class nxopen.optimization.OptimizationBuilder.OptimizationVariable
-
Upper limit value
- variablevalue - Variable in class nxopen.sim.IsvControlPanelBuilder.MachineControlReadVariableData
-
The variable value
- VariableZLevelMilling - Interface in nxopen.cam
-
Represents a Variable Z Level Milling Operation
To create or edit an instance of this class, use
VazlMillingBuilder
Created in NX7.5.0
- variance() - Method in interface nxopen.cam.PitchSetting
-
Returns the pitch variance
License requirements: None.
- variant - Variable in class nxopen.uf.UFUgmgr.VariantConfiguration
-
- variantConfiguration() - Method in interface nxopen.pdm.ConfigurationContextBuilder
-
Returns the
VariantConfigurationBuilder
builder used to edit variant rule configuration
License requirements: nx_4gd_integration ("4th Generation Design")
Created in NX9.0.0
- VariantConfiguration() - Constructor for class nxopen.uf.UFUgmgr.VariantConfiguration
-
- VariantConfiguration(String, String, String) - Constructor for class nxopen.uf.UFUgmgr.VariantConfiguration
-
- VariantConfigurationBuilder - Interface in nxopen.pdm
-
Represents a builder class that performs variant rule configuration.
- VariantConfigurationBuilder.VariantRuleTableInformationData - Class in nxopen.pdm
-
- variantrules - Variable in class nxopen.pdm.VariantConfigurationBuilder.VariantRuleTableInformationData
-
array of selected variant rules
- VariantRuleTableInformationData() - Constructor for class nxopen.pdm.VariantConfigurationBuilder.VariantRuleTableInformationData
-
- variants - Variable in class nxopen.uf.UFUgmgr.AskVariantConfigurationsForDisplayData
-
- variants - Variable in class nxopen.uf.UFUgmgr.AskVariantConfigurationsForLoadData
-
- varMarginIncrement() - Method in interface nxopen.features.shipdesign.InverseBendingLinesBuilder
-
Returns the Increment used to vary horizontal margins for profiles.
- varMarginMax() - Method in interface nxopen.features.shipdesign.InverseBendingLinesBuilder
-
Returns the maximum horizontal margin used for profiles.
- varMarginMin() - Method in interface nxopen.features.shipdesign.InverseBendingLinesBuilder
-
Returns the minimum horizontal margin used for profiles.
- varName() - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
Returns the variable name
License requirements: None.
- varOverlapMax() - Method in interface nxopen.features.shipdesign.InverseBendingLinesBuilder
-
Returns the variable aligned overlap maximum number of grids.
- varOverlapMin() - Method in interface nxopen.features.shipdesign.InverseBendingLinesBuilder
-
Returns the variable aligned overlap minimum number of grids.
- varRadiusData - Variable in class nxopen.uf.UFModl.EdgeBlendMultData
-
- varScope() - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
Returns the variable scope
License requirements: None.
- Varsweep - Interface in nxopen.features
-
Represents a Varsweep feature.
- VarsweepBuilder - Interface in nxopen.features
-
Represents a Variational Sweep feature builder.
- varType() - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
Returns the variable type
License requirements: None.
- VazlMillingBuilder - Interface in nxopen.cam
-
- VB - Static variable in class nxopen.cae.responsesimulation.RSEventSolverParameters.DdamCoefficientType
-
- VBEND - Static variable in class nxopen.tooling.BendInsertDesignBuilder.BendTypeOption
-
v bend
- VBENDING - Static variable in class nxopen.tooling.ForceCalculationBuilder.ProcessTypes
-
V bending
- VBENDING_TREE - Static variable in class nxopen.tooling.ForceCalculationBuilder.ProcessTypes
-
V bending tree
- VBUTT - Static variable in class nxopen.annotations.LineWeldDataBuilder.WeldSymbolType
-
- VBUTT - Static variable in class nxopen.annotations.Symbol
-
Specifies V butt weld symbol
- VBUTT_BROAD_ROOT_FACE - Static variable in class nxopen.annotations.Symbol
-
Specifies V butt with broad root face weld symbol (ISO and DIN only)
- VBUTT_WITH_BROAD_ROOT_FACE - Static variable in class nxopen.annotations.LineWeldDataBuilder.WeldSymbolType
-
- VC - Static variable in class nxopen.cae.responsesimulation.RSEventSolverParameters.DdamCoefficientType
-
- vclose() - Method in interface nxopen.MeshParameterData
-
Returns
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- VCLOSED_CLOSE - Static variable in class nxopen.MeshParameterData.Type
-
- VCLOSED_OPEN - Static variable in class nxopen.MeshParameterData.Type
-
- vcount() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns the number of points in V direction
License requirements: None.
- vCount - Variable in class nxopen.uf.UFModeling.AskFaceGridCountData
-
- VCR - Static variable in class nxopen.sim.SimDebugBuilder.TraceType
-
Trace Vcr
- VCUTOUT - Static variable in class nxopen.features.sheetmetal.ClosedCornerBuilder.TreatmentTypeOptions
-
V shaped relief
- VCUTOUT - Static variable in class nxopen.features.sheetmetal.MiterOptions.ClosedCornerTypeOptions
-
corner has a V shaped cutout in it
- VCUTOUT - Static variable in class nxopen.features.sheetmetal.ThreeBendCornerBuilder.TreatmentTypeOptions
-
- vcutoutAngle1() - Method in interface nxopen.features.sheetmetal.ThreeBendCornerBuilder
-
Returns the angle 1 used for the v cutout treatment.
- vcutoutAngle2() - Method in interface nxopen.features.sheetmetal.ThreeBendCornerBuilder
-
Returns the angle 2 used for the v cutout treatment.
- VDAC_CEO_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- VDAC_CEO_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- VDAC_CFG_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- VDAC_CFG_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- vdcCoordinates() - Method in interface nxopen.CGMBuilder
-
Returns the Virtual Display Coordinates.
- vdcMode - Variable in class nxopen.uf.UFCgm.ExportOptions
-
- VDE_ALL - Static variable in class nxopen.uf.UFView.VdeType
-
- VDE_NON_EDIT - Static variable in class nxopen.uf.UFView.VdeType
-
- VDE_SYSTEM - Static variable in class nxopen.uf.UFView.VdeType
-
- VDE_USER - Static variable in class nxopen.uf.UFView.VdeType
-
- vdeData - Variable in class nxopen.uf.UFView.AskVdeData
-
- vdeData - Variable in class nxopen.uf.UFView.AskVdeDataWithTypeData
-
- VdeData() - Constructor for class nxopen.uf.UFView.VdeData
-
- VdeData(Tag, double, double, int, int, int) - Constructor for class nxopen.uf.UFView.VdeData
-
- VdeDataAndType() - Constructor for class nxopen.uf.UFView.VdeDataAndType
-
- VdeDataAndType(Tag, double, double, int, int, int, UFView.VdeType) - Constructor for class nxopen.uf.UFView.VdeDataAndType
-
- vDegIntData - Variable in class nxopen.uf.UFModl.RefitFaceData
-
- vdegree() - Method in interface nxopen.features.SectionSurfaceBuilder
-
- vdegree() - Method in interface nxopen.geometricutilities.DegreesAndSegmentsOrPatchesBuilder
-
Returns the v degree
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- vdegree() - Method in interface nxopen.MeshParameterData
-
Returns
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- vdegree - Variable in class nxopen.uf.UFModlFeatures.AskThruCurves1Data
-
- vdegree - Variable in class nxopen.uf.UFModlFeatures.AskThruCurvesData
-
- vDerivative - Variable in class nxopen.geometricanalysis.GeometricProperties.CaeFace
-
Derivative in V, Root Part Coordinates
- vDerivative - Variable in class nxopen.geometricanalysis.GeometricProperties.Face
-
Derivative Vector in V direction - Root Part Coordinates
- vDerivativeInWcs - Variable in class nxopen.geometricanalysis.GeometricProperties.CaeFace
-
Derivative in V in Work Part Coordinates
- vDerivativeInWcs - Variable in class nxopen.geometricanalysis.GeometricProperties.Face
-
Derivative Vector in V direction - Work Part Coordinates
- vdeType - Variable in class nxopen.uf.UFView.VdeDataAndType
-
- VDIRECTION - Static variable in class nxopen.features.StudioXformBuilder.InsertKnotDirectionType
-
Deprecated.
Inser knot in V direction
- VDIRECTION - Static variable in class nxopen.features.StudioXformBuilderEx.InsertKnotDirectionType
-
Insert knot in V direction
- vec2(double[]) - Method in interface nxopen.uf.UFVec3
-
- vec2() - Method in interface nxopen.UFSession
-
- vec3(double[]) - Method in interface nxopen.uf.UFVec2
-
- vec3(double[]) - Method in interface nxopen.uf.UFVec4
-
- vec3() - Method in interface nxopen.UFSession
-
- vec3Homogen(double[]) - Method in interface nxopen.uf.UFVec4
-
- vec3Multiply(double[], double[]) - Method in interface nxopen.uf.UFMtx4
-
- vec3MultiplyT(double[], double[]) - Method in interface nxopen.uf.UFMtx4
-
- vec4(double[]) - Method in interface nxopen.uf.UFVec3
-
- vec4() - Method in interface nxopen.UFSession
-
- vec4Homogen(double[], double) - Method in interface nxopen.uf.UFVec3
-
- vecDir - Variable in class nxopen.uf.UFModl.SmholeData
-
- vecDirection() - Method in interface nxopen.cam.FeatureRecognitionBuilder
-
- vecMultiply(double[], double[]) - Method in interface nxopen.uf.UFMtx2
-
- vecMultiply(double[], double[]) - Method in interface nxopen.uf.UFMtx3
-
- vecMultiply(double[], double[]) - Method in interface nxopen.uf.UFMtx4
-
- vecMultiplyT(double[], double[]) - Method in interface nxopen.uf.UFMtx2
-
- vecMultiplyT(double[], double[]) - Method in interface nxopen.uf.UFMtx3
-
- vecMultiplyT(double[], double[]) - Method in interface nxopen.uf.UFMtx4
-
- vector() - Method in interface nxopen.annotations.AssociativityBuilder
-
Returns the vector
License requirements: None.
- VECTOR - Static variable in class nxopen.blockstyler.PropertyList.PropertyType
-
Vector
- vector() - Method in interface nxopen.blockstyler.SpecifyVector
-
Returns the Vector
License requirements: None.
- VECTOR - Static variable in class nxopen.cae.BeamEADBuilder.OrientationMethod
-
use a vector to orient the element
- vector() - Method in interface nxopen.cae.BeamSectionOrientationOptions
-
Returns the orientation vector.
- VECTOR - Static variable in class nxopen.cae.BushingEADBuilder.OrientationMethod
-
use a vector to orient the element
- VECTOR - Static variable in class nxopen.cae.ElementExtrudeBuilder.MethodType
-
along vector
- vector() - Method in interface nxopen.cae.ElementExtrudeBuilder
-
Returns the vector when extrude along vector
License requirements: None.
- VECTOR - Static variable in class nxopen.cae.ElementProjectBuilder.MethodType
-
along vector
- vector() - Method in interface nxopen.cae.ElementProjectBuilder
-
Returns the vector along which projection will happen
License requirements: None.
- vector() - Method in interface nxopen.cae.ElementTranslateBuilder
-
Returns the vector along which the selected elements should be translated
License requirements: None.
- VECTOR - Static variable in class nxopen.cae.GapEADBuilder.OrientationMethod
-
use a vector to orient the element
- vector() - Method in interface nxopen.cae.NodeProjectBuilder
-
Returns the vector along which projection will happen
License requirements: None.
- vector() - Method in interface nxopen.cae.NodeTranslateBuilder
-
Returns the vector
License requirements: None.
- VECTOR - Static variable in class nxopen.cae.Result.DataType
-
- vector() - Method in interface nxopen.cae.ShellEADBuilder
-
Returns the get vector method gets the projection vector for material orientation
License requirements: nx_masterfem ("Finite Element Modeling")
.
- VECTOR - Static variable in class nxopen.cam.BoundaryTurnMemberOffset.MethodType
-
- vector() - Method in interface nxopen.cam.BoundaryTurnMemberOffset
-
Returns the offset vector
License requirements: None.
- VECTOR - Static variable in class nxopen.cam.CircularAboutAxisMoveBuilder.AxisType
-
Vector
- VECTOR - Static variable in class nxopen.cam.CutAngle.Types
-
Vector
- vector() - Method in interface nxopen.cam.CutAngle
-
Returns the single cut vector and two way vector
License requirements: None.
- VECTOR - Static variable in class nxopen.cam.fbm.FeatureGeometry.SequenceDirectionType
-
Direction: Vector
- VECTOR - Static variable in class nxopen.cam.InspectionCmmCommandBuilder.VarTypes
-
Specifies a vector variable
- VECTOR - Static variable in class nxopen.cam.InspectionSensorBuilder.SensorTipLocationTypes
-
Vector
- vector() - Method in interface nxopen.cam.LaserLinearMove
-
Returns the Vector
License requirements: None.
- vector() - Method in interface nxopen.cam.NcmPlanarEngRetBuilder
-
Returns the engage/retract vector
License requirements: None.
- vector() - Method in interface nxopen.cam.NcmScEngRetBuilder
-
Returns the engage/retract vector
License requirements: None.
- vector() - Method in interface nxopen.cam.NormalToToolAxisMoveBuilder
-
Returns the vector
License requirements: None.
- VECTOR - Static variable in class nxopen.cam.OperationBuilder.HoleAxisTypes
-
Vector
- VECTOR - Static variable in class nxopen.cam.PmopToolAxisCiBuilder.ToolAxisTypes
-
Specify Vector
- vector - Variable in class nxopen.cam.PreprocessGeometryBuilder.ParameterData
-
vector
- VECTOR - Static variable in class nxopen.cam.ProbeInspectSurfacePointMoveBuilder.Direction
-
Specify vector
- vector() - Method in interface nxopen.cam.ProbeInspectSurfacePointMoveBuilder
-
Returns the vector to define probing direction
License requirements: None.
- vector() - Method in interface nxopen.cam.ProjVecCiBuilder
-
Returns the Vector
License requirements: None.
- vector() - Method in interface nxopen.cam.RotaryPointMoveBuilder
-
Returns the vector
License requirements: None.
- vector() - Method in interface nxopen.cam.ToolAxisBase
-
Returns the Vector
License requirements: None.
- VECTOR - Static variable in class nxopen.cam.ToolAxisInterpolate.InterpolateTypes
-
Interpolate Types: Vector
- VECTOR - Static variable in class nxopen.cam.TrimPoint.AngleOptions
-
Angle is defined by a vector.
- VECTOR - Static variable in class nxopen.cam.TrimPoint.RampAngleOptions
-
Ramp angle is defined by a vector.
- vector() - Method in interface nxopen.cam.TrimPoint
-
Returns the trim point vector
License requirements: None.
- VECTOR - Static variable in class nxopen.cam.TurnProbeInspectPointMoveBuilder.DirectionTypes
-
Specify Vector
- vector() - Method in interface nxopen.cam.TurnProbeInspectPointMoveBuilder
-
Returns the vector to define probing direction
License requirements: None.
- VECTOR - Static variable in class nxopen.cam.TurnThreadEngageRetractBuilder.EngageRetractTypes
-
Vector
- vector() - Method in interface nxopen.cam.UdeParameter
-
Returns the vector of the parameter
License requirements: cam_base ("CAM BASE")
.
- vector() - Method in interface nxopen.cam.VectorDistanceMoveBuilder
-
Returns the Vector
License requirements: None.
- VECTOR - Static variable in class nxopen.die.DieDirectionBuilder.DirectionType
-
Define a vector for the direction.
- vector() - Method in interface nxopen.die.DieDirectionBuilder
-
Returns the specified vector
License requirements: None.
- VECTOR - Static variable in class nxopen.drawings.BrokenViewBuilder.TypeDirection
-
Specified by Vector
- VECTOR - Static variable in class nxopen.drawings.View2dOrientBuilder.CustomMethod
-
cartesian vector
- VECTOR - Static variable in class nxopen.features.AestheticFaceBlendBuilder.AlignmentType
-
Vector option will align the sections based on the vector
- VECTOR - Static variable in class nxopen.features.AOCSBuilder.FilletOptions
-
Vector given
- VECTOR - Static variable in class nxopen.features.BridgeCurveBuilder.EndObjectTypes
-
Deprecated.
vector object
- VECTOR - Static variable in class nxopen.features.BridgeCurveBuilderEx.EndObjectTypes
-
A vector representing a plane for symmetric constraint
- VECTOR - Static variable in class nxopen.features.CircularBlendCurveBuilder.CylinderDirectionOption
-
Specify vector method
- vector() - Method in interface nxopen.features.CircularBlendCurveBuilder
-
- vector() - Method in interface nxopen.features.DatumAxisBuilder
-
Returns the vector.
- VECTOR - Static variable in class nxopen.features.FitCurveBuilder.ProjectionDirectionOptions
-
Vector
- VECTOR - Static variable in class nxopen.features.FitSurfaceBuilder.DirectionType
-
Vector will specify the fit direction.
- vector() - Method in interface nxopen.features.FitSurfaceBuilder
-
Returns the vector specifies the projection direction
License requirements: nx_freeform_2 ("advanced freeform modeling")
.
- VECTOR - Static variable in class nxopen.features.GuidedExtensionBuilderEx.Types
-
Perpendicular to a vector
- VECTOR - Static variable in class nxopen.features.LawExtensionBuilder.Types
-
Reference vector
- vector() - Method in interface nxopen.features.LawExtensionBuilder
-
Returns the vector.
- VECTOR - Static variable in class nxopen.features.LawExtensionBuilderEx.Types
-
Reference vector
- vector() - Method in interface nxopen.features.LawExtensionBuilderEx
-
Returns the vector.
- VECTOR - Static variable in class nxopen.features.LinearDimensionBuilder.OrientationOptionType
-
Orientation option using vector
- VECTOR - Static variable in class nxopen.features.MatchEdgeBuilder.PoleMovementConstraintEnumType
-
Along user defined vector
- VECTOR - Static variable in class nxopen.features.MatchedReferenceBuilder.Types
-
vector
- VECTOR - Static variable in class nxopen.features.NSidedSurfaceBuilder.UVOrientationType
-
vector orientation
- VECTOR - Static variable in class nxopen.features.PolylineBuilder.MovementMethodType
-
Movement along arbitrary direction
- vector() - Method in interface nxopen.features.ScaleBuilder
-
Returns the vector as nxopen.Direction
License requirements: None.
- VECTOR - Static variable in class nxopen.features.shipdesign.EdgeReinforcementBuilder.OrientationMethods
-
- VECTOR - Static variable in class nxopen.features.shipdesign.OrientationAngleMethodsBuilder.MethodTypes
-
Angle is defined by specifying a vector to align with.
- VECTOR - Static variable in class nxopen.features.shipdesign.ProfileBuilder.OrientationOption
-
- VECTOR - Static variable in class nxopen.features.shipdesign.StiffenerBuilder.OrientationMethod
-
Align stiffener with vector
- VECTOR - Static variable in class nxopen.features.shipdesign.StiffenerSystemBuilder.OrientationMethods
-
- VECTOR - Static variable in class nxopen.features.SilhouetteFlangeBuilder.ReferenceDirectionOptions
-
Create flange along reference vector
- VECTOR - Static variable in class nxopen.features.StudioSplineBuilderEx.MovementMethodType
-
Movement along arbitrary direction
- VECTOR - Static variable in class nxopen.features.StudioXformBuilderEx.MovementMethodType
-
Translate in vector direction
- VECTOR - Static variable in class nxopen.features.StudioXformBuilderEx.RotatingAxisType
-
Rotate in vector direction
- VECTOR - Static variable in class nxopen.features.StudioXformBuilderEx.ScalingDirectionType
-
Scale in vector direction
- VECTOR - Static variable in class nxopen.features.subdivision.SubdivisionExtrudeCageBuilder.DirectionType
-
- vector() - Method in interface nxopen.features.subdivision.SubdivisionExtrudeCageBuilder
-
Returns the vector for extrude.
- VECTOR - Static variable in class nxopen.features.subdivision.TransformCageData.MovementMethodType
-
Movement along arbitrary direction
- VECTOR - Static variable in class nxopen.features.TextBuilder.OrientationMethodOptions
-
Orientation along a vector
- vector() - Method in interface nxopen.geometricanalysis.CurveAnalysisCombsBuilder
-
- vector() - Method in interface nxopen.geometricanalysis.CurveAnalysisInflectionsBuilder
-
- vector() - Method in interface nxopen.geometricanalysis.CurveAnalysisPeaksBuilder
-
- VECTOR - Static variable in class nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder.ProjectionTypes
-
specify vector
- vector() - Method in interface nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder
-
Returns the vector
License requirements: None.
- VECTOR - Static variable in class nxopen.geometricanalysis.DraftAnalysisBuilder.DrawDirection
-
vector;
- VECTOR - Static variable in class nxopen.geometricanalysis.SurfaceIntersectionBuilder.ProjectionTypes
-
specify vector
- vector() - Method in interface nxopen.geometricanalysis.SurfaceIntersectionBuilder
-
Returns the vector
License requirements: None.
- VECTOR - Static variable in class nxopen.geometricutilities.AlongPathPattern.YDirectionOptions
-
y direction is a vector.
- VECTOR - Static variable in class nxopen.geometricutilities.CurveShapingBuilder.MovementMethodType
-
Movement along arbitrary direction
- VECTOR - Static variable in class nxopen.geometricutilities.MovePoleBuilder.MoveMethodType
-
- vector() - Method in interface nxopen.geometricutilities.MovePoleBuilder
-
Returns the vector
License requirements: None.
- VECTOR - Static variable in class nxopen.geometricutilities.ProjectionOptions.DirectionType
-
Vector Constructor
- VECTOR - Static variable in class nxopen.geometricutilities.SpineDefinitionBuilder.MethodOptions
-
Spine by a vector
- vector() - Method in interface nxopen.geometricutilities.SpineDefinitionBuilder
-
Returns the vector
License requirements: None.
- VECTOR - Static variable in class nxopen.MeasureAngleBuilder.ObjectType
-
- vector() - Method in interface nxopen.mechatronics.SlidingJointBuilder
-
Returns the vector.
- VECTOR - Static variable in class nxopen.motion.BushingDefine.OrientationTypes
-
Vector orientation type
- VECTOR - Static variable in class nxopen.motion.JointDefine.OrientationType
-
Vector orientation type
- vector - Variable in class nxopen.motion.PackagingMeasureBuilder.GeometryData
-
Initial vector
- vector() - Method in interface nxopen.Offset
-
Returns the vector of the offset.
- VECTOR - Static variable in class nxopen.PropertyContainer.PropertyType
-
Vector
- vector() - Method in interface nxopen.routing.electrical.AssignProxyBuilder
-
Returns the direction of the proxy port to be created.
- VECTOR - Static variable in class nxopen.RuleManager.RuleType
-
- VECTOR - Static variable in class nxopen.tooling.BlendCurve3DBuilder.BlendCurveOptions
-
Create blend curve by vector method
- VECTOR - Static variable in class nxopen.tooling.MWDesignGuideLinesBuilder.DirectionType
-
Specify Vector
- vector - Variable in class nxopen.uf.UFCurve.DirectionStructU
-
- VECTOR - Static variable in class nxopen.uf.UFKf.Type
-
- vector - Variable in class nxopen.uf.UFModeling.AskSubdivFaceParmsData
-
- vector() - Method in interface nxopen.weld.JointmarkBuilder
-
Returns the vector which points to Y axis
License requirements: ugweld ("UG WELD")
.
- vector1() - Method in interface nxopen.MeasureAngleBuilder
-
Returns the vector1
License requirements: None.
- vector1 - Variable in class nxopen.uf.UFCurve.Bcmmcp
-
- vector2() - Method in interface nxopen.MeasureAngleBuilder
-
Returns the vector2
License requirements: None.
- vector2 - Variable in class nxopen.uf.UFCurve.Bcmmcp
-
- VECTOR3 - Static variable in class nxopen.cam.CAMAttribute.ValueType
-
- VECTOR3D - Static variable in class nxopen.issue.IssueProperty.Type
-
3D vector type
- Vector3d - Class in nxopen
-
Represents a three-dimensional vector .
- Vector3d() - Constructor for class nxopen.Vector3d
-
- Vector3d(double, double, double) - Constructor for class nxopen.Vector3d
-
Constructor for the Vector3d object.
- VECTOR_AXIS - Static variable in class nxopen.uf.UFModl.VectorType
-
- VECTOR_AXIS_EXACT_GEOMETRY - Static variable in class nxopen.uf.UFModl.VectorType
-
- VECTOR_CLEARANCE - Static variable in class nxopen.cam.NcmTransferBuilder.AppDepMethodTypes
-
along vector from/to clearance
- VECTOR_COMPONENT - Static variable in class nxopen.geometricanalysis.DeviationGaugeBuilder.MeasurementMethodType
-
Vector component
- VECTOR_DIRECTION - Static variable in class nxopen.uf.UFModl.VectorType
-
- VECTOR_DIRECTION_EXACT_GEOMETRY - Static variable in class nxopen.uf.UFModl.VectorType
-
- VECTOR_DRAFT - Static variable in class nxopen.features.SilhouetteFlangeBuilder.ReferenceDirectionOptions
-
Create flange along silhouette curve and reference vector
- VECTOR_FACE_NORMAL - Static variable in class nxopen.uf.UFModl.VectorType
-
- VECTOR_FACE_NORMALS - Static variable in class nxopen.uf.UFModl.VectorType
-
- VECTOR_FACE_NORMALS_EXACT_GEOMETRY - Static variable in class nxopen.uf.UFModl.VectorType
-
- VECTOR_FORCE - Static variable in class nxopen.uf.UFMotion.VectorType
-
- VECTOR_PLANE - Static variable in class nxopen.cam.NcmPlanarEngRetBuilder.EngRetTypes
-
Vector to plane
- VECTOR_PLANE_OF_CURVES - Static variable in class nxopen.uf.UFModl.VectorType
-
- VECTOR_PROJECTION - Static variable in class nxopen.cae.ShellEADBuilder.MaterialOrientationMethod
-
use a vector projected to the shell to orient the material
- VECTOR_RADIUS - Static variable in class nxopen.cam.ProbeCalibrateStylusMoveBuilder.CalibrateStylusType
-
Stylus vector ball radius
- VECTOR_TORQUE - Static variable in class nxopen.uf.UFMotion.VectorType
-
- VECTOR_TWO_POINTS - Static variable in class nxopen.uf.UFModl.VectorType
-
- vectorChoice() - Method in interface nxopen.cae.BeamEADBuilder
-
Returns the method to get the orientation vector choice
License requirements: nx_masterfem ("Finite Element Modeling")
.
- vectorComponentDirection() - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder
-
Returns the direction vector.
- vectorConstraint() - Method in interface nxopen.features.FitSurfaceBuilder
-
Returns the direction constraint
License requirements: nx_freeform_2 ("advanced freeform modeling")
.
- VectorData() - Constructor for class nxopen.uf.UFScop.VectorData
-
- VectorData(double[], double[], double[], boolean) - Constructor for class nxopen.uf.UFScop.VectorData
-
- vectorDefineDirection() - Method in interface nxopen.tooling.SectionLineCreationBuilder
-
Returns the vector direction
License requirements: None.
- vectorDirection() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
Returns the vector direction
License requirements: None.
- vectorDistance() - Method in interface nxopen.cam.BoundaryTurnMemberOffset
-
Returns the offset vecot distance
License requirements: None.
- VectorDistanceMoveBuilder - Interface in nxopen.cam
-
- VectorDistanceMoveBuilder.EndType - Class in nxopen.cam
-
the choice
- VectorFieldWrapper - Interface in nxopen.fields
-
This class defines a vector value that is internally
backed up by a (optionally scaled) field or three expressions.
- vectorForAlong() - Method in interface nxopen.geometricutilities.PatternOrientation
-
Returns the vectorForAlong, a vector for Along type orientation need.
- VectorForce - Interface in nxopen.motion
-
Represents a vector force
To create or edit an instance of this class, use
VectorForceBuilder
Created in NX5.0.0
- VectorForceBuilder - Interface in nxopen.motion
-
- VectorForceCollection - Interface in nxopen.motion
-
Represents a collection of vector force objects
To obtain an instance of this class, refer to
MotionManager
Created in NX5.0.0
- vectorForces() - Method in interface nxopen.motion.MotionManager
-
Returns the Motion.VectorForceCollection
belonging to this part
Created in NX3.0.0
- VectorForceTorque() - Constructor for class nxopen.uf.UFMotion.VectorForceTorque
-
- VectorForceTorque(String, UFMotion.VectorType, Tag, Tag, Tag, UFMotion.ReferenceFrame, Tag[], Tag, Tag) - Constructor for class nxopen.uf.UFMotion.VectorForceTorque
-
- vectorForRamp() - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
Returns the vector to determintate the datum plane normal that the sweep guide curve in.
- vectorOption() - Method in interface nxopen.drawings.HingeLineBuilder
-
Returns the vector option: Inferred or Defined
License requirements: None.
- vectorOrigin() - Method in interface nxopen.features.GuidedExtensionBuilderEx
-
Returns the origin of the reference vector
License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_2 ("advanced freeform modeling") OR ug_mold_design ("UG MOLD") OR die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- vectorPlaces() - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
Returns the vector decimal places
License requirements: None.
- VECTORS - Static variable in class nxopen.cae.ElementNormalsType
-
- VECTORS - Static variable in class nxopen.cae.LaminateDrapingDataBuilder.DrapingDirectionType
-
Define draping direction using vector(s)
- vectors - Variable in class nxopen.DisplayManager.J3dGeometryData
-
true if vector data produced
- vectors - Variable in class nxopen.uf.UFDisp.J3dEntity
-
- vectorScale() - Method in interface nxopen.motion.LoadTransferBuilder
-
Returns the vector scale
License requirements: mechanisms ("MECHANISMS")
.
- vectorSource() - Method in interface nxopen.cae.NodeTranslateBuilder
-
Returns the source vector
License requirements: None.
- vectorTarget() - Method in interface nxopen.cae.NodeTranslateBuilder
-
Returns the target vector
License requirements: None.
- VectorTorque - Interface in nxopen.motion
-
Represents a vector torque
To create or edit an instance of this class, use
VectorTorqueBuilder
Created in NX5.0.0
- VectorTorqueBuilder - Interface in nxopen.motion
-
- VectorTorqueCollection - Interface in nxopen.motion
-
Represents a collection of vector torque objects
To obtain an instance of this class, refer to
MotionManager
Created in NX5.0.0
- vectorTorques() - Method in interface nxopen.motion.MotionManager
-
Returns the Motion.VectorTorqueCollection
belonging to this part
Created in NX3.0.0
- vectorValue() - Method in interface nxopen.Expression
-
Returns the vector value of the expression.
- vectorViewVec() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
Returns the vector view vec
License requirements: None.
- vectorXc() - Method in interface nxopen.cam.TurnThreadEngageRetractBuilder
-
Returns the vector Xc
License requirements: None.
- vectorYc() - Method in interface nxopen.cam.TurnThreadEngageRetractBuilder
-
Returns the vector Yc
License requirements: None.
- vehicle() - Method in interface nxopen.HumanPosturePredictionBuilder
-
Returns the vehicle type: Class A or Class B
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- VEHICLE_CONTACT - Static variable in class nxopen.features.vehicledesign.CloseRangeVisibilityBuilder.PositionMethods
-
Vehicle contact
- VEHICLE_OBJECT - Static variable in class nxopen.features.vehicledesign.CloseRangeVisibilityBuilder.PositionPaths
-
Vehicle object
- VEHICLE_OBJECT - Static variable in class nxopen.features.vehicledesign.CrashBarrierBuilder.PositionObjectType
-
- VEHICLE_STRUCTURE - Static variable in class nxopen.features.vehicledesign.SeatBeltAnchorageBuilder.AnchorageLocationTypes
-
vehicle structure
- vehicleBodies() - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder
-
Returns the bodies selection used to identify vehicle bodies.
- vehicleCategory() - Method in interface nxopen.features.vehicledesign.BaseDataBuilder
-
Returns the vehicle category.
- VehicleCoordinateSystem - Interface in nxopen.features.vehicledesign
-
- VehicleCoordinateSystemBuilder - Interface in nxopen.features.vehicledesign
-
Represents a
VehicleCoordinateSystem
builder
To create a new instance of this class, use
nxopen.features.vehicledesignCollection#createVehicleCoordinateSystemBuilder
Created in NX7.0.0
- VehicleCoordinateSystemBuilder.Types - Class in nxopen.features.vehicledesign
-
Vehicle Coordinate System type
- vehicleDescription() - Method in interface nxopen.features.vehicledesign.BaseDataBuilder
-
Returns the name or short description of the vehicle.
- vehicleDesignCollection() - Method in interface nxopen.features.FeatureCollection
-
Returns the VehicleDesignCollection instance belonging to this part .
- VehicleDesignCollection - Interface in nxopen.features
-
This class contains the factory method for creating vehicle design feature builder.
- vehiclePackagingDataName() - Method in interface nxopen.HumanPosturePredictionBuilder
-
Returns the vehicle packaging data name, it is invalid when using customer defined vehicle data.
- vehicleWidthExp() - Method in interface nxopen.features.vehicledesign.BaseDataBuilder
-
Returns the vehicle width which is calculated outgoing from the vehicle mid plane half of the defined value in positive y direction and as well half of the defined value in negative y direction.
- VELOCITY - Static variable in class nxopen.cae.responsesimulation.EvaluationResultType
-
- VELOCITY - Static variable in class nxopen.cae.responsesimulation.SensorResultType
-
- VELOCITY - Static variable in class nxopen.cae.responsesimulation.TransmissibilityEvaluationSettingBuilder.MotionType
-
- velocity() - Method in interface nxopen.cae.responsesimulation.VelocityImpactParameters
-
Returns the velocity
License requirements: None.
- VELOCITY - Static variable in class nxopen.cae.Result.Quantity
-
- VELOCITY - Static variable in class nxopen.cae.XyFunctionMeasure
-
Velocity unit
- VELOCITY - Static variable in class nxopen.motion.DriverOperation.IntegrationType
-
Velocity
- velocity() - Method in interface nxopen.motion.DriverOperation
-
- VELOCITY - Static variable in class nxopen.motion.GraphBuilder.RequestChoices
-
Velocity
- VELOCITY - Static variable in class nxopen.motion.MotionSensorBuilder.Types
-
velocity sensor type
- velocity - Variable in class nxopen.uf.UFMotion.JointMotionInput
-
- VELOCITY_COMPONENT - Static variable in class nxopen.cae.Result.Quantity
-
- VELOCITY_FT - Static variable in class nxopen.cae.XyFunctionUnit
-
Velocity unit: ft/sec
- VELOCITY_IN - Static variable in class nxopen.cae.XyFunctionUnit
-
Velocity unit: in/sec
- VELOCITY_LEVEL_CROSSING_RATE - Static variable in class nxopen.cae.Result.Quantity
-
- VELOCITY_M - Static variable in class nxopen.cae.XyFunctionUnit
-
Velocity unit: m/sec
- VELOCITY_MM - Static variable in class nxopen.cae.XyFunctionUnit
-
Velocity unit: mm/sec
- velocityExp() - Method in interface nxopen.routing.DuctSizeCalculatorBuilder
-
Returns the velocity component Flow parameter for the duct.
- velocityExpression() - Method in interface nxopen.motion.DriverOperation
-
Returns the velocity expression
License requirements: None.
- VelocityImpactExcitation - Interface in nxopen.cae.responsesimulation
-
- VelocityImpactExcitationBuilder - Interface in nxopen.cae.responsesimulation
-
- VelocityImpactExcitationBuilder.ImpactMethodType - Class in nxopen.cae.responsesimulation
-
the impact definiton methods
- VelocityImpactParameters - Interface in nxopen.cae.responsesimulation
-
- VelocityImpactParameters.StartPositionType - Class in nxopen.cae.responsesimulation
-
the calculation start position for impact
- VelocityParameters() - Constructor for class nxopen.cae.Result.VelocityParameters
-
- VelocityParameters(int, int, Result.Type) - Constructor for class nxopen.cae.Result.VelocityParameters
-
Constructor for the VelocityParameters object.
- velocityVector() - Method in interface nxopen.mechatronics.TransportSurfaceBuilder
-
Returns the specify vector.
- vend() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns the V end parameter
License requirements: None.
- vend() - Method in interface nxopen.geometricutilities.SurfaceRangeBuilder
-
Returns the v end
License requirements: None.
- vendDeg() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns the V end degrees
License requirements: None.
- vendDist() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns the V end distance
License requirements: None.
- vendDistance() - Method in interface nxopen.geometricutilities.LocalUntrimBuilder
-
Returns the V end distance.
- vendLimit() - Method in interface nxopen.geometricutilities.LocalUntrimBuilder
-
Returns the region limit of V end.
- vendMode() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns the end V mode
License requirements: None.
- vendSweep() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns the V sweep degrees
License requirements: None.
- ventHoleParent() - Method in interface nxopen.die.DrawDiePunchBuilder
-
Returns the vent hole parent builder of the draw die punch.
- VentHolesMarking - Interface in nxopen.features.shipdesign
-
Represents a vent holes marking feature
To create or edit an instance of this class, use
VentHolesMarkingBuilder
Created in NX5.0.3
- VentHolesMarkingBuilder - Interface in nxopen.features.shipdesign
-
- ventilationHoles() - Method in interface nxopen.features.shipdesign.ProfileListBuilder
-
Returns the ventilation holes
License requirements: None.
- VentilationHoles2 - Interface in nxopen.features.shipdesign
-
Represents a ventilation holes2 feature
To create or edit an instance of this class, use
VentilationHoles2Builder
Created in NX8.0.0
- VentilationHoles2Builder - Interface in nxopen.features.shipdesign
-
- VentilationHoles2Builder.ArraySpacing - Class in nxopen.features.shipdesign
-
available methods used to define the spacing between the holes
- ventSpacing() - Method in interface nxopen.features.shipdesign.SteelVentHolesBuilder
-
Returns the spacing applied between each vent hole.
- ventSpacing() - Method in interface nxopen.features.shipdesign.VentilationHoles2Builder
-
Returns the vent spacing
License requirements: None.
- verify_penetrations(Part[]) - Method in interface nxopen.features.shipdesign.PenetrationUtils
-
Verify penetrations
License requirements: nx_penetration_mgmt ("Penetration Management")
.
- Verify_penetrationsData() - Constructor for class nxopen.features.shipdesign.PenetrationUtils.Verify_penetrationsData
-
- verifyHoleSeries(NXObject) - Method in interface nxopen.tooling.ReusablePocketBuilder
-
Verifies hole series parameters.
- VerifyPenetrationBuilder - Interface in nxopen.features.shipdesign
-
- VerifyPenetrationBuilder.SelectionDialogType - Class in nxopen.features.shipdesign
-
Represents the selection dialog type
- version - Variable in class nxopen.assemblies.ClearanceSet.Summary
-
The version of this analysis run.
- version - Variable in class nxopen.BasePart.HistoryEventInformation
-
version number
- version() - Method in interface nxopen.cae.AfuHeaderId
-
Returns the version of AFU Header Id
License requirements: nx_ftk ("NX Advanced Graphing")
.
- version() - Method in interface nxopen.features.shipdesign.EdgeCutBuilder
-
Returns the version of the feature (used to determine which properties and methods are applicable) during edit.
- version() - Method in interface nxopen.features.shipdesign.ExcessMaterialBuilder
-
Returns the version of the feature (used to determine which properties and methods are applicable) during edit.
- version() - Method in interface nxopen.partfamily.FamilyAttribute
-
Returns the version of the given attribute
License requirements: solid_modeling ("SOLIDS MODELING")
.
- version() - Method in interface nxopen.partfamily.Instance
-
Returns the version of instance.
- version() - Method in interface nxopen.partfamily.Template
-
Returns the version of the part family template
License requirements: solid_modeling ("SOLIDS MODELING")
.
- version - Variable in class nxopen.uf.UFClear.Summary
-
- version - Variable in class nxopen.uf.UFFacet.Parameters
-
- version - Variable in class nxopen.uf.UFModl.CompareOptions
-
- version - Variable in class nxopen.uf.UFPart.AskNthHistoryData
-
- version - Variable in class nxopen.uf.UFSf.AskLanguageData
-
- version - Variable in class nxopen.uf.UFTag.DecomposeHandleData
-
- version - Variable in class nxopen.uf.UFUgfont.FontHeader
-
- versionObjects() - Method in interface nxopen.preferences.PartDrafting
-
Returns the drafting version objects setting when updating drafting objects and member views
License requirements: None.
- versionUpAllDraftingObjects() - Method in interface nxopen.DraftingManager
-
Converts all older drafting objects (including member views) in the part to the latest version.
- versionUpSelectedDraftingObjects(NXObject[]) - Method in interface nxopen.DraftingManager
-
Converts selected drafting objects (including member views) in the part to the latest version.
- vertAlignmentPosition - Variable in class nxopen.uf.UFDrf.AssociativeOrigin
-
- vertAnnotation - Variable in class nxopen.uf.UFDrf.AssociativeOrigin
-
- VERTEX - Static variable in class nxopen.features.LabelChamferBuilder.ChamferType
-
- vertex() - Method in interface nxopen.features.sheetmetal.FlangeBuilder
-
Returns the vertex on the flange edge, needed to dimension the flange width.
- vertex1 - Variable in class nxopen.Edge.VerticesData
-
First vertex in the edge
- vertex1 - Variable in class nxopen.facet.FacetedEdge.VerticesData
-
First vertex in the edge
- vertex1() - Method in interface nxopen.facet.SewFacetBodyBuilder
-
Returns the first vertex used to define the range
License requirements: None.
- VERTEX1 - Static variable in class nxopen.geometricutilities.ShapeFrameBuilder.AnchorAttachmentType
-
Anchor is attached to the first vertex of the frame
- VERTEX1 - Static variable in class nxopen.geometricutilities.SurfaceRangeBuilder.AnchorPositionType
-
Anchor at the first corner of the surface
- vertex1 - Variable in class nxopen.SubdivisionMeshEdge.VerticesData
-
First vertex in the edge
- vertex1Range1() - Method in interface nxopen.facet.BridgeFacetBodyBuilder
-
Returns the first vertex used to define the range on the the first facet body
License requirements: None.
- vertex1Range2() - Method in interface nxopen.facet.BridgeFacetBodyBuilder
-
Returns the first vertex used to defind the range on the second facet body
License requirements: None.
- vertex2 - Variable in class nxopen.Edge.VerticesData
-
Second vertex in the edge
- vertex2 - Variable in class nxopen.facet.FacetedEdge.VerticesData
-
Second vertex in the edge
- vertex2() - Method in interface nxopen.facet.SewFacetBodyBuilder
-
Returns the second vertex used to define the range
License requirements: None.
- VERTEX2 - Static variable in class nxopen.geometricutilities.ShapeFrameBuilder.AnchorAttachmentType
-
Anchor is attached to the second vertex of the frame
- VERTEX2 - Static variable in class nxopen.geometricutilities.SurfaceRangeBuilder.AnchorPositionType
-
Anchor at the second corner of the surface
- vertex2 - Variable in class nxopen.SubdivisionMeshEdge.VerticesData
-
Second vertex in the edge
- vertex2Range1() - Method in interface nxopen.facet.BridgeFacetBodyBuilder
-
Returns the second vertex used to define the range on the first facet body
License requirements: None.
- vertex2Range2() - Method in interface nxopen.facet.BridgeFacetBodyBuilder
-
Returns the second vertex used to defind the range on the second facet body
License requirements: None.
- VERTEX3 - Static variable in class nxopen.geometricutilities.ShapeFrameBuilder.AnchorAttachmentType
-
Anchor is attached to the third vertex of the frame
- VERTEX3 - Static variable in class nxopen.geometricutilities.SurfaceRangeBuilder.AnchorPositionType
-
Anchor at the third corner of the surface
- VERTEX4 - Static variable in class nxopen.geometricutilities.ShapeFrameBuilder.AnchorAttachmentType
-
Anchor is attached to the fourth vertex of the frame
- VERTEX4 - Static variable in class nxopen.geometricutilities.SurfaceRangeBuilder.AnchorPositionType
-
Anchor at the fourth corner of the surface
- VERTEX_TOPO - Static variable in class nxopen.uf.UFBrep.TopoType
-
- vertexColor() - Method in interface nxopen.preferences.SubdivisionModelingPreferences
-
Returns the vertex color.
- vertexCount - Variable in class nxopen.uf.UFModeling.AskEdgeVertsData
-
- vertexIndex - Variable in class nxopen.uf.UFSket.ConGeom
-
- vertexList - Variable in class nxopen.cae.MappedMeshBuilder.CornerData
-
- vertexOnCurveEnabled() - Method in interface nxopen.features.CurveFinderBuilder
-
Returns a value that indicates whether add vertex on curve relation recognition for the last vertexes added to the collector
License requirements: None.
- vertexPrefix - Variable in class nxopen.uf.UFSket.AskPreferencesData
-
- VertexSelectorsData() - Constructor for class nxopen.geometricutilities.RegionTracker.VertexSelectorsData
-
- vertexSize() - Method in interface nxopen.preferences.SubdivisionModelingPreferences
-
Returns the vertex size.
- vertexStyle() - Method in interface nxopen.preferences.SubdivisionModelingPreferences
-
Returns the vertex style.
- vertexType - Variable in class nxopen.uf.UFSket.ConGeom
-
- VERTICAL - Static variable in class nxopen.annotations.ChamferOrientationType
-
perpendicular with default
- VERTICAL - Static variable in class nxopen.annotations.DimensionMeasurementBuilder.MeasurementMethod
-
Vertical measurement direction
- VERTICAL - Static variable in class nxopen.annotations.DimensionType
-
Vertical dimension
- VERTICAL - Static variable in class nxopen.annotations.FlipOption
-
Flips a symbol vertically about a horizontal
line taken through its anchor point
- VERTICAL - Static variable in class nxopen.AxisOrientation
-
- VERTICAL - Static variable in class nxopen.cae.BeamEADBuilder.VectorChoiceType
-
the vector is defined to be vertical
- VERTICAL - Static variable in class nxopen.cae.BeamSection.DirectionOption
-
Indicates the vertical direction of beam section
- VERTICAL - Static variable in class nxopen.cae.responsesimulation.DDAMComponentData.LoadingType
-
- VERTICAL - Static variable in class nxopen.cae.responsesimulation.DDAMExcitation.LoadingType
-
- VERTICAL - Static variable in class nxopen.die.DrawBeadBuilder.OrientationTypes
-
The width and angle parameters are oriented along the draw direction at the section location.
- VERTICAL - Static variable in class nxopen.display.ImageBaseBuilder.ReferenceDirection
-
vertical reference direction
- VERTICAL - Static variable in class nxopen.drawings.ViewPlacementBuilder.Method
-
Align the view vertically to another view
- VERTICAL - Static variable in class nxopen.features.shipdesign.StiffenerBySupportPathBuilder.Method
-
Vertical
- vertical() - Method in interface nxopen.InferredConstraintsBuilder
-
Returns the vertical infer-constraint setting.
- VERTICAL - Static variable in class nxopen.PositioningDimension.Subtype
-
Vertical dimension
- VERTICAL - Static variable in class nxopen.routing.PlatformCreatorBuilder.ReferenceType
-
- VERTICAL - Static variable in class nxopen.Sketch.ConstraintType
-
- vertical() - Method in interface nxopen.SketchAutoConstrainBuilder
-
Returns the vertical
License requirements: None.
- VERTICAL - Static variable in class nxopen.SketchConstraintBuilder.Constraint
-
- VERTICAL - Static variable in class nxopen.uf.UFSket.ConType
-
- VERTICAL_CENTERLINE1 - Static variable in class nxopen.features.AssociativityType
-
vertical centerline end point 1
- VERTICAL_CENTERLINE1 - Static variable in class nxopen.features.RPOBuilder.AssociativityType
-
vertical centerline end point 1
- VERTICAL_CENTERLINE2 - Static variable in class nxopen.features.AssociativityType
-
vertical centerline end point 2
- VERTICAL_CENTERLINE2 - Static variable in class nxopen.features.RPOBuilder.AssociativityType
-
vertical centerline end point 2
- VERTICAL_DIM - Static variable in class nxopen.Sketch.ConstraintType
-
- VERTICAL_DIM - Static variable in class nxopen.uf.UFSket.ConType
-
- VERTICAL_DISTANCE_BY_POSITION - Static variable in class nxopen.annotations.OffsetCenterPointBuilder.Offset
-
vertical distance by position, applicable only for creation
- VERTICAL_DISTANCE_FROM_ARC - Static variable in class nxopen.annotations.OffsetCenterPointBuilder.Offset
-
vertical distance from arc
- VERTICAL_DISTANCE_FROM_CENTER - Static variable in class nxopen.annotations.OffsetCenterPointBuilder.Offset
-
vertical distance from center
- VERTICAL_DOWN - Static variable in class nxopen.annotations.AssociativityLineOption
-
Vertical down
- VERTICAL_DOWN_LINE_TYPE - Static variable in class nxopen.uf.UFDrf.ObjectAssocLineType
-
- VERTICAL_TANGENT - Static variable in class nxopen.features.vehicledesign.DynamicCurbBuilder.MethodType
-
- VERTICAL_UP - Static variable in class nxopen.annotations.AssociativityLineOption
-
Vertical up
- VERTICAL_UP_LINE_TYPE - Static variable in class nxopen.uf.UFDrf.ObjectAssocLineType
-
- verticalAttachment() - Method in interface nxopen.annotations.LeaderData
-
Returns the vertical attachment
License requirements: None.
- verticalCenteringMark() - Method in interface nxopen.drawings.BordersAndZonesBuilder
-
- VerticalCenteringMarkType - Class in nxopen.drawings
-
the vertical centering mark type
- verticalClearance() - Method in interface nxopen.cam.PlungeMillingBuilder
-
Returns the clearance vertical builder (inheritable double)
License requirements: None.
- VerticalDimension - Interface in nxopen.annotations
-
Represents a vertical dimension
To create or edit an instance of this class, use
LinearDimensionBuilder
Created in NX4.0.0
- verticalFlip() - Method in interface nxopen.annotations.BaseCustomSymbolBuilder
-
Returns the vertical flip
License requirements: None.
- verticalGroupAttachment() - Method in interface nxopen.annotations.PartsListBuilder
-
Returns the leader attachment to vertical callout groups
License requirements: None.
- verticalGrowthDirection() - Method in interface nxopen.drawings.DrawingRegionBuilder
-
Returns the vertical growth direction
License requirements: None.
- verticalInferredMarginLocation() - Method in interface nxopen.annotations.BaseOrdinateDimensionBuilder
-
Returns the vertical inferred margin location
License requirements: None.
- verticalLength() - Method in interface nxopen.features.vehicledesign.CloseRangeCameraListItemBuilder
-
Returns the expression containing the value for the vertical legth.
- verticalLimitBuilder() - Method in interface nxopen.cam.StepoverBuilder
-
Returns the vertical limit (inheritable tool dependent)
License requirements: None.
- VERTICALLY - Static variable in class nxopen.display.CameraBuilder.FovMeasured
-
Vertical
- VERTICALLY_ALIGNED - Static variable in class nxopen.annotations.AssociativeOriginType
-
- VerticalOrdinateDimension - Interface in nxopen.annotations
-
Represents a vertical ordinate dimension
To create or edit an instance of this class, use
OrdinateDimensionBuilder
Created in NX4.0.0
- VerticalOrdinateMargin - Interface in nxopen.annotations
-
Represents a vertical ordinate margin .
- VerticalPosition - Interface in nxopen.cam
-
Represents a VerticalPosition Builder .
- VerticalPosition.OffsetTypes - Class in nxopen.cam
-
offset options .
- verticalSize() - Method in interface nxopen.drawings.BordersAndZonesBuilder
-
- verticalSize() - Method in interface nxopen.drawings.SheetZoneSettingsBuilder
-
Returns the vertical size
License requirements: None.
- verticalText() - Method in interface nxopen.annotations.DraftingNoteBuilder
-
Returns the vertical text for text
License requirements: None.
- VerticalTextJustification - Class in nxopen.annotations
-
Represents the vertical text justification
- vertices - Variable in class nxopen.uf.UFFacet.AskVerticesOfFacetData
-
- VERTICES_ERROR - Static variable in class nxopen.uf.UFConstants
-
- VerticesData() - Constructor for class nxopen.Edge.VerticesData
-
- VerticesData() - Constructor for class nxopen.facet.FacetedEdge.VerticesData
-
- VerticesData() - Constructor for class nxopen.SubdivisionMeshEdge.VerticesData
-
- vertJust - Variable in class nxopen.uf.UFDraw.TabnotCellParams
-
- vertJust - Variable in class nxopen.uf.UFTabnot.CellPrefs
-
- VERY_FAST - Static variable in class nxopen.MovieSettingsBuilder.PlaybackSpeedChoices
-
Specifies very fast playback speed (four times record speed)
- VERY_HIGH - Static variable in class nxopen.display.Shadows.SsaoQualityType
-
Very High quality setting
- VERY_HIGH - Static variable in class nxopen.features.MeshTransformerBuilder.SmoothingType
-
Smoothing high
- VERY_LOW - Static variable in class nxopen.features.MeshTransformerBuilder.SmoothingType
-
Smoothing very low
- VERY_SIMILAR - Static variable in class nxopen.shapesearch.ShapeSearchBuilder.ShapeSimilarity
-
search with very similar condition
- VERY_SLOW - Static variable in class nxopen.cae.optimization.TBSTopologyControllerOptimizationParameters.Speed
-
Very small stepsize
- VERY_SLOW - Static variable in class nxopen.MovieSettingsBuilder.PlaybackSpeedChoices
-
Specifies very slow playback speed (quarter of record speed)
- VF - Static variable in class nxopen.cae.responsesimulation.RSEventSolverParameters.DdamCoefficientType
-
- vGrid - Variable in class nxopen.DisplayModification.NewGridData
-
number of grid lines in the v direction
- VGROOVE - Static variable in class nxopen.weld.WeldGrooveBuilder.Types
-
V Groove
- VIBRATION - Static variable in class nxopen.cae.Result.SolutionType
-
Vibration
- vibrationDampedAngularFrequency(double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the angular frequency from the damping ration and the natural angular frequcncy.
- vibrationDampedFrequency(double) - Method in interface nxopen.EngineeringFunction
-
Calculate the damped frequency from natural angular frequency.
- vibrationDampingRatio(double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the damping ratio.
- vibrationNaturalAngularFrequency(double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the natural angular frequency from the mass and stiffness.
- vibrationNaturalCriticalDamping1(double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the natural critical damping from the mass and stiffness.
- vibrationNaturalCriticalDamping2(double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the natural critical damping from the mass and natural angular frequency.
- vibrationNaturalFrequency(double) - Method in interface nxopen.EngineeringFunction
-
Calculate the natural frequency from natural angular frequency.
- VIBRO_ACOUSTIC - Static variable in class nxopen.cae.SimResultReference.Type
-
vibration acoustic result
- VICURVE - Static variable in class nxopen.drawings.DraftingCurveInfo.DraftingCurveType
-
Specifies Virtual Intersection Curve
- VIETNAMESE - Static variable in class nxopen.features.TextBuilder.ScriptOptions
-
Specifies the Vietnamese character set
- view() - Method in interface nxopen.annotations.BaseFrameBarBuilder
-
Returns the select view
License requirements: None.
- view - Variable in class nxopen.annotations.SelectDimension.ValueData
-
selected object view
- view - Variable in class nxopen.ApparentChainingRule.Data
-
The view.
- view - Variable in class nxopen.assemblies.SelectComponent.ValueData
-
selected object view
- view - Variable in class nxopen.cae.SelectCAEBody.ValueData
-
selected object view
- view - Variable in class nxopen.cae.SelectCAEEdge.ValueData
-
selected object view
- view - Variable in class nxopen.cae.SelectCAEFace.ValueData
-
selected object view
- view() - Method in interface nxopen.display.DynamicSectionBuilder
-
Returns the modeling view in which section object edits are being done.
- VIEW - Static variable in class nxopen.display.FacetSettingsBuilder.FacetScale
-
Adjusts tolerances by view scale
- VIEW - Static variable in class nxopen.drawings.DrawingRegionBuilder.RegionDraftingObjectType
-
- view() - Method in interface nxopen.drawings.ParentViewBuilder
-
Returns the parent view
License requirements: None.
- view() - Method in interface nxopen.drawings.RefineDisplayBuilder
-
Returns the view to refine.
- view - Variable in class nxopen.drawings.SelectDraftingView.ValueData
-
selected object view
- view - Variable in class nxopen.drawings.SelectDrawingRegion.ValueData
-
selected object view
- view - Variable in class nxopen.drawings.SelectDrawingView.ValueData
-
selected object view
- view - Variable in class nxopen.drawings.SelectSectionLine.ValueData
-
selected object view
- view() - Method in interface nxopen.drawings.ViewAlignmentBuilder
-
Returns the select drafting view component
License requirements: None.
- view() - Method in interface nxopen.drawings.ViewCopyTo3dBuilder
-
- view() - Method in interface nxopen.drawings.ViewProjectionPlaneBuilder
-
Returns the select view.
- view - Variable in class nxopen.facet.SelectFacetedBody.ValueData
-
selected object view
- VIEW - Static variable in class nxopen.features.FitCurveBuilder.ProjectionDirectionOptions
-
View
- VIEW - Static variable in class nxopen.features.GeneralConicBuilder.DrawingPlaneOptions
-
Use view plane
- VIEW - Static variable in class nxopen.features.MatchEdgeBuilder.PoleMovementConstraintEnumType
-
Along view
- VIEW - Static variable in class nxopen.features.PolylineBuilder.DrawingPlaneOptions
-
View plane
- VIEW - Static variable in class nxopen.features.PolylineBuilder.MovementMethodType
-
Movement in view plane
- view - Variable in class nxopen.features.SelectFlatPattern.ValueData
-
selected object view
- view - Variable in class nxopen.features.SelectPartModule.ValueData
-
selected object view
- VIEW - Static variable in class nxopen.features.StudioSplineBuilderEx.DrawingPlaneOptions
-
View plane
- VIEW - Static variable in class nxopen.features.StudioSplineBuilderEx.MovementMethodType
-
Movement in view plane
- VIEW - Static variable in class nxopen.features.StudioXformBuilderEx.MovementMethodType
-
Translate in view direction
- VIEW - Static variable in class nxopen.features.StudioXformBuilderEx.RotatingAxisType
-
Rotate in view direction
- VIEW - Static variable in class nxopen.features.StudioXformBuilderEx.ScalingDirectionType
-
Scale in view direction
- view - Variable in class nxopen.features.subdivision.CageManipulatorData.ObjectMoveData
-
The view in which object is dragged.
- VIEW - Static variable in class nxopen.features.subdivision.TransformCageData.MovementMethodType
-
Movement in view plane
- VIEW - Static variable in class nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder.ProjectionTypes
-
view plane
- VIEW - Static variable in class nxopen.geometricanalysis.sectionanalysis.RadialBuilder.RotationAxisType
-
View direction
- VIEW - Static variable in class nxopen.geometricanalysis.sectionanalysis.SectionPlaneBuilder.PlaneType
-
View plane
- VIEW - Static variable in class nxopen.geometricanalysis.SurfaceIntersectionBuilder.ProjectionTypes
-
view plane
- VIEW - Static variable in class nxopen.geometricutilities.CurveShapingBuilder.MovementMethodType
-
Movement in view plane
- VIEW - Static variable in class nxopen.geometricutilities.MovePoleBuilder.MoveMethodType
-
- view - Variable in class nxopen.layout2d.SelectComponent.ValueData
-
selected object view
- view - Variable in class nxopen.mechatronics.SelectAdapterSignal.ValueData
-
selected object view
- view - Variable in class nxopen.mechatronics.SelectCollisionSensor.ValueData
-
selected object view
- view - Variable in class nxopen.mechatronics.SelectPhysicsConstraint.ValueData
-
selected object view
- view - Variable in class nxopen.mechatronics.SelectPhysicsJoint.ValueData
-
selected object view
- view - Variable in class nxopen.mechatronics.SelectRigidBody.ValueData
-
selected object view
- view - Variable in class nxopen.mechatronics.SelectSystemObject.ValueData
-
selected object view
- view - Variable in class nxopen.mechatronics.SelectTagFormObject.ValueData
-
selected object view
- view - Variable in class nxopen.motion.SelectJoint.ValueData
-
selected object view
- view - Variable in class nxopen.motion.SelectLink.ValueData
-
selected object view
- view - Variable in class nxopen.motion.SelectMarker.ValueData
-
selected object view
- view - Variable in class nxopen.routing.SelectControlPoint.ValueData
-
selected object view
- view - Variable in class nxopen.routing.SelectISegment.ValueData
-
selected object view
- view - Variable in class nxopen.routing.SelectLineSegment.ValueData
-
selected object view
- view - Variable in class nxopen.routing.SelectRun.ValueData
-
selected object view
- view - Variable in class nxopen.routing.SelectStock.ValueData
-
selected object view
- view - Variable in class nxopen.SelectBody.ValueData
-
selected object view
- view - Variable in class nxopen.SelectCartesianCoordinateSystem.ValueData
-
selected object view
- view - Variable in class nxopen.SelectCoordinateSystem.ValueData
-
selected object view
- view - Variable in class nxopen.SelectCurve.ValueData
-
selected object view
- view - Variable in class nxopen.SelectDatumPlane.ValueData
-
selected object view
- view - Variable in class nxopen.SelectDisplayableObject.ValueData
-
selected object view
- view - Variable in class nxopen.SelectEdge.ValueData
-
selected object view
- view - Variable in class nxopen.SelectFace.ValueData
-
selected object view
- view - Variable in class nxopen.SelectIBaseCurve.ValueData
-
selected object view
- view - Variable in class nxopen.SelectICurve.ValueData
-
selected object view
- view - Variable in class nxopen.Selection.AskSelectionCursorPositionData
-
- view - Variable in class nxopen.Selection.AskSelectionRectanglePositionData
-
View of button down position
- view - Variable in class nxopen.SelectIParameterizedSurface.ValueData
-
selected object view
- view - Variable in class nxopen.SelectISurface.ValueData
-
selected object view
- view - Variable in class nxopen.SelectLine.ValueData
-
selected object view
- view - Variable in class nxopen.SelectNXObject.ValueData
-
selected object view
- view - Variable in class nxopen.SelectObject.ValueData
-
selected object view
- view - Variable in class nxopen.SelectPart.ValueData
-
selected object view
- view - Variable in class nxopen.SelectPoint.ValueData
-
selected object view
- view - Variable in class nxopen.SelectSketch.ValueData
-
selected object view
- view - Variable in class nxopen.SelectSmartObject.ValueData
-
selected object view
- view - Variable in class nxopen.SelectSpline.ValueData
-
selected object view
- view - Variable in class nxopen.SelectTaggedObject.ValueData
-
selected object view
- view - Variable in class nxopen.SelectView.ValueData
-
selected object view
- view - Variable in class nxopen.Sketch.DimensionGeometry
-
The view the geometry is dependent on, if any
- view() - Method in interface nxopen.Sketch
-
Returns the view corresponding to sketch
License requirements: None.
- view() - Method in interface nxopen.SketchInDraftingBuilder
-
Returns the selected view.
- VIEW - Static variable in class nxopen.tooling.AssemblyDrawingBuilder.Types
-
- VIEW - Static variable in class nxopen.tooling.HoleManufacturingNoteBuilder.DefineByViewOrHoles
-
- view - Variable in class nxopen.uf.UFDrf.GdtLeaderData
-
- view - Variable in class nxopen.uf.UFGdt.LeaderSpec
-
- view - Variable in class nxopen.uf.UFUi.AskSelCursorPosData
-
- view - Variable in class nxopen.uf.UFUi.AskSelRectanglePosData
-
- view() - Method in interface nxopen.UFSession
-
- view - Variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.ViewModeData
-
View tag of the view being displayed
- View - Interface in nxopen
-
Represents a view.
- view - Variable in class nxopen.weld.SelectDatumPin.ValueData
-
selected object view
- view - Variable in class nxopen.weld.SelectDatumSurface.ValueData
-
selected object view
- View.Canned - Class in nxopen
-
Describes a simplified indexing scheme for accessing canned views
with interfaces that use this enum as a parameter.
- View.RenderingStyleType - Class in nxopen
-
Describes the rendering style for geometry displayed in the view.
- View.ScaleAdjustment - Class in nxopen
-
Describes simple, predefined adjustments that may be applied to a
view's scale while another operation is performed, in conjunction, on the view.
- View.ScaleFactor - Class in nxopen
-
Describes the relative scales to which a view can be set
- View.ShowOrHideType - Class in nxopen
-
Specifies whether a show or hide operation, or both, has just been done
- view1 - Variable in class nxopen.annotations.SelectDimension.ValueWithSnapData
-
first selected object view
- view1 - Variable in class nxopen.assemblies.SelectComponent.ValueWithSnapData
-
first selected object view
- view1 - Variable in class nxopen.cae.SelectCAEBody.ValueWithSnapData
-
first selected object view
- view1 - Variable in class nxopen.cae.SelectCAEEdge.ValueWithSnapData
-
first selected object view
- view1 - Variable in class nxopen.cae.SelectCAEFace.ValueWithSnapData
-
first selected object view
- view1 - Variable in class nxopen.drawings.SelectDraftingView.ValueWithSnapData
-
first selected object view
- view1 - Variable in class nxopen.drawings.SelectDrawingRegion.ValueWithSnapData
-
first selected object view
- view1 - Variable in class nxopen.drawings.SelectDrawingView.ValueWithSnapData
-
first selected object view
- view1 - Variable in class nxopen.drawings.SelectSectionLine.ValueWithSnapData
-
first selected object view
- view1 - Variable in class nxopen.facet.SelectFacetedBody.ValueWithSnapData
-
first selected object view
- view1 - Variable in class nxopen.features.SelectFlatPattern.ValueWithSnapData
-
first selected object view
- view1 - Variable in class nxopen.features.SelectPartModule.ValueWithSnapData
-
first selected object view
- view1 - Variable in class nxopen.layout2d.SelectComponent.ValueWithSnapData
-
first selected object view
- view1 - Variable in class nxopen.mechatronics.SelectAdapterSignal.ValueWithSnapData
-
first selected object view
- view1 - Variable in class nxopen.mechatronics.SelectCollisionSensor.ValueWithSnapData
-
first selected object view
- view1 - Variable in class nxopen.mechatronics.SelectPhysicsConstraint.ValueWithSnapData
-
first selected object view
- view1 - Variable in class nxopen.mechatronics.SelectPhysicsJoint.ValueWithSnapData
-
first selected object view
- view1 - Variable in class nxopen.mechatronics.SelectRigidBody.ValueWithSnapData
-
first selected object view
- view1 - Variable in class nxopen.mechatronics.SelectSystemObject.ValueWithSnapData
-
first selected object view
- view1 - Variable in class nxopen.mechatronics.SelectTagFormObject.ValueWithSnapData
-
first selected object view
- view1 - Variable in class nxopen.motion.SelectJoint.ValueWithSnapData
-
first selected object view
- view1 - Variable in class nxopen.motion.SelectLink.ValueWithSnapData
-
first selected object view
- view1 - Variable in class nxopen.motion.SelectMarker.ValueWithSnapData
-
first selected object view
- view1 - Variable in class nxopen.routing.SelectControlPoint.ValueWithSnapData
-
first selected object view
- view1 - Variable in class nxopen.routing.SelectISegment.ValueWithSnapData
-
first selected object view
- view1 - Variable in class nxopen.routing.SelectLineSegment.ValueWithSnapData
-
first selected object view
- view1 - Variable in class nxopen.routing.SelectRun.ValueWithSnapData
-
first selected object view
- view1 - Variable in class nxopen.routing.SelectStock.ValueWithSnapData
-
first selected object view
- view1 - Variable in class nxopen.SelectBody.ValueWithSnapData
-
first selected object view
- view1 - Variable in class nxopen.SelectCartesianCoordinateSystem.ValueWithSnapData
-
first selected object view
- view1 - Variable in class nxopen.SelectCoordinateSystem.ValueWithSnapData
-
first selected object view
- view1 - Variable in class nxopen.SelectCurve.ValueWithSnapData
-
first selected object view
- view1 - Variable in class nxopen.SelectDatumPlane.ValueWithSnapData
-
first selected object view
- view1 - Variable in class nxopen.SelectDisplayableObject.ValueWithSnapData
-
first selected object view
- view1 - Variable in class nxopen.SelectEdge.ValueWithSnapData
-
first selected object view
- view1 - Variable in class nxopen.SelectFace.ValueWithSnapData
-
first selected object view
- view1 - Variable in class nxopen.SelectIBaseCurve.ValueWithSnapData
-
first selected object view
- view1 - Variable in class nxopen.SelectICurve.ValueWithSnapData
-
first selected object view
- view1 - Variable in class nxopen.SelectIParameterizedSurface.ValueWithSnapData
-
first selected object view
- view1 - Variable in class nxopen.SelectISurface.ValueWithSnapData
-
first selected object view
- view1 - Variable in class nxopen.SelectLine.ValueWithSnapData
-
first selected object view
- view1 - Variable in class nxopen.SelectNXObject.ValueWithSnapData
-
first selected object view
- view1 - Variable in class nxopen.SelectObject.ValueWithSnapData
-
first selected object view
- view1 - Variable in class nxopen.SelectPart.ValueWithSnapData
-
first selected object view
- view1 - Variable in class nxopen.SelectPoint.ValueWithSnapData
-
first selected object view
- view1 - Variable in class nxopen.SelectSketch.ValueWithSnapData
-
first selected object view
- view1 - Variable in class nxopen.SelectSmartObject.ValueWithSnapData
-
first selected object view
- view1 - Variable in class nxopen.SelectSpline.ValueWithSnapData
-
first selected object view
- view1 - Variable in class nxopen.SelectTaggedObject.ValueWithSnapData
-
first selected object view
- view1 - Variable in class nxopen.SelectView.ValueWithSnapData
-
first selected object view
- view1 - Variable in class nxopen.weld.SelectDatumPin.ValueWithSnapData
-
first selected object view
- view1 - Variable in class nxopen.weld.SelectDatumSurface.ValueWithSnapData
-
first selected object view
- view2 - Variable in class nxopen.annotations.SelectDimension.ValueWithSnapData
-
second selected object view
- view2 - Variable in class nxopen.assemblies.SelectComponent.ValueWithSnapData
-
second selected object view
- view2 - Variable in class nxopen.cae.SelectCAEBody.ValueWithSnapData
-
second selected object view
- view2 - Variable in class nxopen.cae.SelectCAEEdge.ValueWithSnapData
-
second selected object view
- view2 - Variable in class nxopen.cae.SelectCAEFace.ValueWithSnapData
-
second selected object view
- view2 - Variable in class nxopen.drawings.SelectDraftingView.ValueWithSnapData
-
second selected object view
- view2 - Variable in class nxopen.drawings.SelectDrawingRegion.ValueWithSnapData
-
second selected object view
- view2 - Variable in class nxopen.drawings.SelectDrawingView.ValueWithSnapData
-
second selected object view
- view2 - Variable in class nxopen.drawings.SelectSectionLine.ValueWithSnapData
-
second selected object view
- view2 - Variable in class nxopen.facet.SelectFacetedBody.ValueWithSnapData
-
second selected object view
- view2 - Variable in class nxopen.features.SelectFlatPattern.ValueWithSnapData
-
second selected object view
- view2 - Variable in class nxopen.features.SelectPartModule.ValueWithSnapData
-
second selected object view
- view2 - Variable in class nxopen.layout2d.SelectComponent.ValueWithSnapData
-
second selected object view
- view2 - Variable in class nxopen.mechatronics.SelectAdapterSignal.ValueWithSnapData
-
second selected object view
- view2 - Variable in class nxopen.mechatronics.SelectCollisionSensor.ValueWithSnapData
-
second selected object view
- view2 - Variable in class nxopen.mechatronics.SelectPhysicsConstraint.ValueWithSnapData
-
second selected object view
- view2 - Variable in class nxopen.mechatronics.SelectPhysicsJoint.ValueWithSnapData
-
second selected object view
- view2 - Variable in class nxopen.mechatronics.SelectRigidBody.ValueWithSnapData
-
second selected object view
- view2 - Variable in class nxopen.mechatronics.SelectSystemObject.ValueWithSnapData
-
second selected object view
- view2 - Variable in class nxopen.mechatronics.SelectTagFormObject.ValueWithSnapData
-
second selected object view
- view2 - Variable in class nxopen.motion.SelectJoint.ValueWithSnapData
-
second selected object view
- view2 - Variable in class nxopen.motion.SelectLink.ValueWithSnapData
-
second selected object view
- view2 - Variable in class nxopen.motion.SelectMarker.ValueWithSnapData
-
second selected object view
- view2 - Variable in class nxopen.routing.SelectControlPoint.ValueWithSnapData
-
second selected object view
- view2 - Variable in class nxopen.routing.SelectISegment.ValueWithSnapData
-
second selected object view
- view2 - Variable in class nxopen.routing.SelectLineSegment.ValueWithSnapData
-
second selected object view
- view2 - Variable in class nxopen.routing.SelectRun.ValueWithSnapData
-
second selected object view
- view2 - Variable in class nxopen.routing.SelectStock.ValueWithSnapData
-
second selected object view
- view2 - Variable in class nxopen.SelectBody.ValueWithSnapData
-
second selected object view
- view2 - Variable in class nxopen.SelectCartesianCoordinateSystem.ValueWithSnapData
-
second selected object view
- view2 - Variable in class nxopen.SelectCoordinateSystem.ValueWithSnapData
-
second selected object view
- view2 - Variable in class nxopen.SelectCurve.ValueWithSnapData
-
second selected object view
- view2 - Variable in class nxopen.SelectDatumPlane.ValueWithSnapData
-
second selected object view
- view2 - Variable in class nxopen.SelectDisplayableObject.ValueWithSnapData
-
second selected object view
- view2 - Variable in class nxopen.SelectEdge.ValueWithSnapData
-
second selected object view
- view2 - Variable in class nxopen.SelectFace.ValueWithSnapData
-
second selected object view
- view2 - Variable in class nxopen.SelectIBaseCurve.ValueWithSnapData
-
second selected object view
- view2 - Variable in class nxopen.SelectICurve.ValueWithSnapData
-
second selected object view
- view2 - Variable in class nxopen.SelectIParameterizedSurface.ValueWithSnapData
-
second selected object view
- view2 - Variable in class nxopen.SelectISurface.ValueWithSnapData
-
second selected object view
- view2 - Variable in class nxopen.SelectLine.ValueWithSnapData
-
second selected object view
- view2 - Variable in class nxopen.SelectNXObject.ValueWithSnapData
-
second selected object view
- view2 - Variable in class nxopen.SelectObject.ValueWithSnapData
-
second selected object view
- view2 - Variable in class nxopen.SelectPart.ValueWithSnapData
-
second selected object view
- view2 - Variable in class nxopen.SelectPoint.ValueWithSnapData
-
second selected object view
- view2 - Variable in class nxopen.SelectSketch.ValueWithSnapData
-
second selected object view
- view2 - Variable in class nxopen.SelectSmartObject.ValueWithSnapData
-
second selected object view
- view2 - Variable in class nxopen.SelectSpline.ValueWithSnapData
-
second selected object view
- view2 - Variable in class nxopen.SelectTaggedObject.ValueWithSnapData
-
second selected object view
- view2 - Variable in class nxopen.SelectView.ValueWithSnapData
-
second selected object view
- view2 - Variable in class nxopen.weld.SelectDatumPin.ValueWithSnapData
-
second selected object view
- view2 - Variable in class nxopen.weld.SelectDatumSurface.ValueWithSnapData
-
second selected object view
- View2dOrientBuilder - Interface in nxopen.drawings
-
Represents the View 2D Orientation (Drawings.View2dOrientBuilder)
Created in NX6.0.0
- View2dOrientBuilder.CustomMethod - Class in nxopen.drawings
-
The custom orientation method
- View2dOrientBuilder.Type - Class in nxopen.drawings
-
The view orientation type
- VIEW_CREATION_WIZARD - Static variable in class nxopen.drawings.GeneralWorkFlowBuilder.ModelBasedAlwaysStartType
-
- VIEW_DIRECTION - Static variable in class nxopen.facet.SnipFacetBodyBuilder.DirectionType
-
Snip along view direction
- VIEW_FACTOR - Static variable in class nxopen.cae.Result.Quantity
-
- VIEW_FACTORS_SUM - Static variable in class nxopen.cae.Result.Quantity
-
- VIEW_LABEL_ABOVE - Static variable in class nxopen.uf.UFDraw.ViewLabelScalePosition
-
- VIEW_LABEL_ABOVE_BOUNDARY - Static variable in class nxopen.uf.UFDraw.ViewLabelPosition
-
- VIEW_LABEL_AFTER - Static variable in class nxopen.uf.UFDraw.ViewLabelScalePosition
-
- VIEW_LABEL_BEFORE - Static variable in class nxopen.uf.UFDraw.ViewLabelScalePosition
-
- VIEW_LABEL_BELOW - Static variable in class nxopen.uf.UFDraw.ViewLabelScalePosition
-
- VIEW_LABEL_BELOW_BOUNDARY - Static variable in class nxopen.uf.UFDraw.ViewLabelPosition
-
- VIEW_LABEL_DASHED_LETTER - Static variable in class nxopen.uf.UFDraw.ViewLabelLetterFormat
-
- VIEW_LABEL_DETAIL_VIEW - Static variable in class nxopen.uf.UFDraw.ViewLabelParmType
-
- VIEW_LABEL_HORIZONTAL_FRACTION - Static variable in class nxopen.uf.UFDraw.ViewLabelScaleFormat
-
- VIEW_LABEL_NX - Static variable in class nxopen.uf.UFDraw.ViewLabelScaleFormat
-
- VIEW_LABEL_OTHER_VIEW - Static variable in class nxopen.uf.UFDraw.ViewLabelParmType
-
- VIEW_LABEL_PREFIX_AND_LETTER - Static variable in class nxopen.uf.UFDraw.ViewLabelViewTextType
-
- VIEW_LABEL_PROJECTED_VIEW - Static variable in class nxopen.uf.UFDraw.ViewLabelParmType
-
- VIEW_LABEL_RATIO - Static variable in class nxopen.uf.UFDraw.ViewLabelScaleFormat
-
- VIEW_LABEL_SECTION_VIEW - Static variable in class nxopen.uf.UFDraw.ViewLabelParmType
-
- VIEW_LABEL_SINGLE_LETTER - Static variable in class nxopen.uf.UFDraw.ViewLabelLetterFormat
-
- VIEW_LABEL_VERTICAL_FRACTION - Static variable in class nxopen.uf.UFDraw.ViewLabelScaleFormat
-
- VIEW_LABEL_VIEW_NAME - Static variable in class nxopen.uf.UFDraw.ViewLabelViewTextType
-
- VIEW_OF_DEFINITION - Static variable in class nxopen.preferences.PartVisualizationNamesBorders.NameDisplay
-
View of Definition places
each name in the work view
current at the time of name
creation
- VIEW_OF_LAST_CURSOR - Static variable in class nxopen.display.TransientText.ViewType
-
- VIEW_SCALE - Static variable in class nxopen.annotations.PmiResizeMethod
-
- ViewAlignment - Interface in nxopen.drawings
-
View Alignment object.
- ViewAlignmentBuilder - Interface in nxopen.drawings
-
- ViewAlignmentCollection - Interface in nxopen.drawings
-
- viewAlignments() - Method in interface nxopen.Part
-
Returns the ViewAlignmentCollection belonging to this part .
- viewAngle() - Method in interface nxopen.features.vehicledesign.CloseRangeCameraListItemBuilder
-
Returns the expression containing the value for the view angle.
- viewBoundary() - Method in interface nxopen.drawings.DrawingViewBuilder
-
- viewBoundary() - Method in interface nxopen.drawings.ViewCreationWizardBuilder
-
Returns the view boundary option
License requirements: None.
- ViewBoundary() - Constructor for class nxopen.uf.UFDraw.ViewBoundary
-
- ViewBoundary(Tag, boolean, int, Tag[], Tag) - Constructor for class nxopen.uf.UFDraw.ViewBoundary
-
- ViewBoundaryBuilder - Interface in nxopen.drawings
-
Represents the View Boundary (Drawings.ViewBoundaryBuilder)
Created in NX6.0.0
- ViewBoundaryBuilder.Type - Class in nxopen.drawings
-
The view boundary type
- viewBoundaryColor() - Method in interface nxopen.drawings.ViewStyleDetailBuilder
-
Returns the view boundary color on the DETAIL tab of the View Style Dialog
License requirements: None.
- viewBoundaryColor() - Method in interface nxopen.preferences.DetailViewPreferences
-
Returns the view boundary color option
License requirements: drafting ("DRAFTING")
.
- viewBoundaryFont() - Method in interface nxopen.drawings.ViewStyleDetailBuilder
-
Returns the view boundary font on the DETAIL tab of the View Style Dialog
License requirements: None.
- viewBoundaryFont() - Method in interface nxopen.preferences.DetailViewPreferences
-
Returns the view boundary font option
License requirements: drafting ("DRAFTING")
.
- viewBoundaryWidth() - Method in interface nxopen.drawings.ViewStyleDetailBuilder
-
Returns the view boundary width on the DETAIL tab of the View Style Dialog
License requirements: None.
- viewBoundaryWidth() - Method in interface nxopen.preferences.DetailViewPreferences
-
Returns the view boundary width option
License requirements: drafting ("DRAFTING")
.
- viewBreak() - Method in interface nxopen.drafting.PreferencesBuilder
-
Returns the view break builder
License requirements: None.
- ViewBreak - Interface in nxopen.drawings
-
ViewBreak - defines the portion of a view that gets hidden to
produce a broken view
To create or edit an instance of this class, use
BrokenViewBuilder
Created in NX7.5.0
- ViewBreak.ViewBreakDisplayableObjectsAndOffsetsData - Class in nxopen.drawings
-
- ViewBreakBuilder - Interface in nxopen.drawings
-
Represents a
ViewBreakBuilder
This is a sub-builder class and cannot be directly instantiated
Created in NX9.0.0
- ViewBreakBuilder.Viewbreaklinestyle - Class in nxopen.drawings
-
style for view break line
- ViewBreakCollection - Interface in nxopen.drawings
-
- ViewBreakDisplayableObjectsAndOffsetsData() - Constructor for class nxopen.drawings.ViewBreak.ViewBreakDisplayableObjectsAndOffsetsData
-
- viewBreaks() - Method in interface nxopen.drawings.DraftingView
-
Returns the ViewBreakCollection instance belonging to this view .
- ViewCollection - Interface in nxopen
-
Represents a collection of
View
s.
- viewCommonViewLabel() - Method in interface nxopen.drafting.PreferencesBuilder
-
- viewCommonViewLabel() - Method in interface nxopen.drawings.EditSectionLineSettingsBuilder
-
Returns the view common label builder
License requirements: None.
- viewCommonViewLabel() - Method in interface nxopen.drawings.EditViewLabelSettingsBuilder
-
Returns the view common view label builder
License requirements: None.
- viewCommonViewLabel() - Method in interface nxopen.drawings.EditViewSettingsBuilder
-
- viewCommonViewLabel() - Method in interface nxopen.drawings.SectionLineSettingsBuilder
-
Returns the view Common View label builder
License requirements: None.
- viewCommonViewLabel() - Method in interface nxopen.drawings.ViewStyleBuilder
-
Returns the view common label builder
License requirements: drafting ("DRAFTING")
.
- ViewCommonViewLabelBuilder - Interface in nxopen.drawings
-
- ViewCommonViewLabelBuilder.SecondaryAlignmentType - Class in nxopen.drawings
-
secondary Alignment Type
- ViewCommonViewLabelBuilder.SecondaryIndexingType - Class in nxopen.drawings
-
secondary Indexing Type
- viewCompare() - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
Returns the view compare
License requirements: None.
- ViewCopyTo3dBuilder - Interface in nxopen.drawings
-
- ViewCopyTo3dBuilder.BoundingBoxOption - Class in nxopen.drawings
-
The bounding box options
- ViewCopyTo3dBuilder.DistanceFromViewPlaneOption - Class in nxopen.drawings
-
The option to get the distance
- ViewCopyTo3dBuilder.Option - Class in nxopen.drawings
-
- ViewCopyTo3dBuilder.OutputOption - Class in nxopen.drawings
-
The output options
- ViewCopyTo3dBuilder.Types - Class in nxopen.drawings
-
The type of copy to 3d selections
- ViewCreationWizardBuilder - Interface in nxopen.drawings
-
- ViewCreationWizardBuilder.Option - Class in nxopen.drawings
-
The placement option type
- ViewCreationWizardBuilder.ResolutionOption - Class in nxopen.drawings
-
the view resolution option type
- ViewCreationWizardBuilder.ViewBoundaryOption - Class in nxopen.drawings
-
The view boundary option type
- ViewCreationWizardBuilder.ViewRepresentations - Class in nxopen.drawings
-
the view representation mode
- ViewDependentDisplayManager - Interface in nxopen
-
Represents all view dependent display operations
To obtain an instance of this class, refer to
View
Created in NX5.0.0
- ViewDependentDisplayManager.Font - Class in nxopen
-
specifies the font for wireframe edits .
- ViewDependentDisplayManager.PartialShading - Class in nxopen
-
specifies the partial shading options for shading edits .
- ViewDependentDisplayManager.Translucency - Class in nxopen
-
specifies the translucency options for shading edits .
- ViewDependentDisplayManager.Width - Class in nxopen
-
specifies the width for wireframe edits .
- viewDependentStatus - Variable in class nxopen.uf.UFPatt.AskData
-
- viewDetailLabel() - Method in interface nxopen.drafting.PreferencesBuilder
-
Returns the view detail label builder
License requirements: None.
- viewDetailLabel() - Method in interface nxopen.drawings.EditViewLabelSettingsBuilder
-
Returns the view detail label builder
License requirements: None.
- viewDetailLabel() - Method in interface nxopen.drawings.EditViewSettingsBuilder
-
Returns the view detail label builder
License requirements: None.
- ViewDetailLabelBuilder - Interface in nxopen.drawings
-
- ViewDetailLabelBuilder.LabelParentDisplayTypes - Class in nxopen.drawings
-
Label on Parent Display type
- ViewDetailLabelBuilder.LabelParentTextPlacement - Class in nxopen.drawings
-
Label on Parent Text Placement type
- viewDirection() - Method in interface nxopen.facet.SnipFacetBodyBuilder
-
Returns the view direction
License requirements: None.
- viewDirection - Variable in class nxopen.features.subdivision.CageManipulatorData.ObjectMoveData
-
The view direction.
- viewDirection - Variable in class nxopen.features.subdivision.CageManipulatorData.ObjectSelectionData
-
The view direction.
- viewDisplay - Variable in class nxopen.uf.UFDisp.SystemParams
-
- viewEditMode() - Method in interface nxopen.DxfdwgCreator
-
Returns the view edit mode - if set to true this will include view modified/view erase data in the
resultant autocad file.
- viewedPartitionScheme() - Method in interface nxopen.assemblies.SubsetBuilder
-
- viewEid - Variable in class nxopen.uf.UFDrf.AssociativeOrigin
-
- viewFeatureFailure() - Method in interface nxopen.assemblies.RelinkerBuilder
-
Views the feature failure information.
- viewGeometryToSketch() - Method in interface nxopen.ASCImporter
-
Returns the toggle of creating sketch in view
License requirements: nx_layout ("NX Layout")
.
- viewindex - Variable in class nxopen.cae.xyplot.Plot.DeviceAndViewIndexData
-
the index of view
- ViewInfo() - Constructor for class nxopen.uf.UFDraw.ViewInfo
-
- ViewInfo(UFDraw.ViewStatus, Tag, double, boolean, boolean, boolean, boolean, boolean, String, String) - Constructor for class nxopen.uf.UFDraw.ViewInfo
-
- ViewingDirectionArrow - Interface in nxopen.drawings
-
This class represents a Drafting Viewing Direction Arrow.
- ViewingDirectionArrowLabel - Interface in nxopen.drawings
-
This class represents a Drafting Viewing Direction Arrow Label.
- viewLabel() - Method in interface nxopen.drafting.PreferencesBuilder
-
Returns the view label builder
License requirements: None.
- viewLabel() - Method in interface nxopen.drawings.EditViewLabelSettingsBuilder
-
Returns the view label builder
License requirements: None.
- viewLabel() - Method in interface nxopen.drawings.EditViewSettingsBuilder
-
Returns the view label builder
License requirements: None.
- viewLabel() - Method in interface nxopen.drawings.GeneralViewStyle
-
Returns the display of view label.
- viewLabel() - Method in interface nxopen.drawings.ViewStyleGeneralBuilder
-
Returns the view label toggle on the GENERAL tab of the View Style Dialog
License requirements: None.
- viewLabel - Variable in class nxopen.uf.UFDraw.ViewLabelParms
-
- ViewLabelBuilder - Interface in nxopen.drawings
-
- viewLabelCustomize - Variable in class nxopen.uf.UFDraw.ViewLabelParms
-
- viewLabelOption() - Method in interface nxopen.drawings.ViewDetailLabelBuilder
-
Returns the view label option
License requirements: None.
- viewLabelOption() - Method in interface nxopen.drawings.ViewLabelBuilder
-
Returns the view label option
License requirements: None.
- viewLabelOption() - Method in interface nxopen.drawings.ViewSectionLabelBuilder
-
Returns the view label option
License requirements: None.
- ViewLabelParms() - Constructor for class nxopen.uf.UFDraw.ViewLabelParms
-
- ViewLabelParms(UFDraw.ViewLabelParmType, UFDraw.ViewLabelViewTextType, UFDraw.ViewLabelLetterFormat, UFDraw.ViewLabelPosition, UFDraw.ViewLabelScalePosition, UFDraw.ViewLabelScaleFormat, UFDrf.ViewLabelTextToStubFormat, double, double, double, boolean, boolean, boolean, boolean, String, String, String, UFDraw.LabelOnParentType, double, String, boolean, boolean, UFDraw.SecondaryIndexingAlign, double) - Constructor for class nxopen.uf.UFDraw.ViewLabelParms
-
- viewLabelParmType - Variable in class nxopen.uf.UFDraw.ViewLabelParms
-
- viewLabelPosition - Variable in class nxopen.uf.UFDraw.ViewLabelParms
-
- viewLabelPrefix - Variable in class nxopen.uf.UFDraw.ViewLabelParms
-
- viewLabels() - Method in interface nxopen.drawings.ViewCreationWizardBuilder
-
Returns the view labels
License requirements: None.
- viewLabelTextToStubFormat - Variable in class nxopen.uf.UFDraw.ViewLabelParms
-
- viewLabelType - Variable in class nxopen.uf.UFDraw.ViewLabelParms
-
- ViewLabelTypes - Class in nxopen.drawings
-
view label type
- ViewLaminateBuilder - Interface in nxopen.cae
-
Represents a View Laminate Builder.
- viewLetter - Variable in class nxopen.uf.UFDraw.ViewLabelParms
-
- viewList() - Method in interface nxopen.DxfdwgCreator
-
Returns the view list - comma separated list of views to export
License requirements: None.
- viewList() - Method in interface nxopen.features.shipdesign.SectionDrawingBuilder
-
Returns the section view list
License requirements: None.
- viewList() - Method in interface nxopen.IgesCreator
-
Returns the view list - comma separated list of views
License requirements: None.
- viewLocation() - Method in interface nxopen.tooling.AssemblyDrawingBuilder
-
Returns the view location
License requirements: None.
- ViewMatrixAndOriginData() - Constructor for class nxopen.routing.electrical.CablewaysLayoutView.ViewMatrixAndOriginData
-
- viewMode - Variable in class nxopen.uf.UFDisp.Inquire
-
- viewMode - Variable in class nxopen.uf.UFPart.ImportPartModes
-
- viewMode - Variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.ViewModeData
-
View mode describes the views shading
and face analysis mode - see enum values for more details
- ViewModeData() - Constructor for class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.ViewModeData
-
- viewName() - Method in interface nxopen.annotations.LightweightSectionBuilder
-
Returns the name of the lightweight section view
License requirements: None.
- viewName() - Method in interface nxopen.NXTo2dCreator
-
Returns the View Name - name of view to export
License requirements: None.
- viewName - Variable in class nxopen.uf.UFSket.Info
-
- viewNameFormat() - Method in interface nxopen.annotations.CuttingPlaneSymbolBuilder
-
Returns the name view from symbol
License requirements: None.
- viewNetlistHistory() - Method in interface nxopen.routing.RouteManager
-
Prints the Netlist content history to the Listing Window
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- viewOfGeometry - Variable in class nxopen.uf.UFDrf.AssociativeOrigin
-
- viewOption() - Method in interface nxopen.tooling.AssemblyDrawingBuilder
-
Returns the option for view tools
License requirements: None.
- viewOrientation() - Method in interface nxopen.cae.xyplot.WallDisplayStyles3D
-
Returns the view orientation matrix
License requirements: None.
- viewOrientation() - Method in interface nxopen.drawings.SectionViewBuilder
-
Returns the view orientation
License requirements: None.
- ViewOrientationBuilder - Interface in nxopen.drawings
-
Represents a ViewOrientationBuilder.
- ViewOrientationBuilder.Orientation - Class in nxopen.drawings
-
This enum represents view orientation type.
- viewOrigin() - Method in interface nxopen.drawings.ViewStylePerspectiveBuilder
-
Returns the perspective view origin on the PERSPECTIVE tab of the View Style Dialog
License requirements: None.
- viewPlacement() - Method in interface nxopen.drawings.DrawingViewBuilder
-
- viewPlacement() - Method in interface nxopen.drawings.SectionViewBuilder
-
Returns the view placement
License requirements: None.
- viewPlacement() - Method in interface nxopen.drawings.StandardViewsBuilder
-
- ViewPlacementBuilder - Interface in nxopen.drawings
-
- ViewPlacementBuilder.Method - Class in nxopen.drawings
-
view method
- ViewPlacementBuilder.Option - Class in nxopen.drawings
-
view option
- viewPlacementCenter() - Method in interface nxopen.drawings.MultipleViewPlacementBuilder
-
Returns the view placement block for the center option
License requirements: None.
- viewPlacementFirstCorner() - Method in interface nxopen.drawings.MultipleViewPlacementBuilder
-
Returns the view placement block for the first corner
License requirements: nx_layout ("NX Layout")
.
- viewPlacementSecondCorner() - Method in interface nxopen.drawings.MultipleViewPlacementBuilder
-
Returns the view placement block for the second corner
License requirements: nx_layout ("NX Layout")
.
- VIEWPORT_DISPLAYED - Static variable in class nxopen.cae.Post.Threshold
-
- VIEWPORT_RESULT - Static variable in class nxopen.cae.Post.Threshold
-
- viewPortIndex() - Method in interface nxopen.cae.xyplot.BasePlotParameters
-
Returns the index of a view port on main graphic window, on which plot graph will be shown.
- viewPreferences() - Method in interface nxopen.Part
-
Returns the ViewPreferences Collection .
- ViewPreferences - Interface in nxopen.preferences
-
Represents set of style applicable to drafting views.
- ViewPrfs() - Constructor for class nxopen.uf.UFDraw.ViewPrfs
-
- ViewPrfs(UFDraw.HiddenLine, int, int, int, UFDraw.EdgeHidingEdge, UFDraw.Smooth, double, UFDraw.Silhouette, UFDraw.Uvhatch, int, int, int, UFDraw.Gap, double, UFDraw.VirtualIntersect, int, int, int, UFDraw.Gap, double, UFDraw.ExtractedEdges, int, int, int, int, boolean, boolean, int, double, int, int, int, int, int, int, UFDraw.Gap, double) - Constructor for class nxopen.uf.UFDraw.ViewPrfs
-
- viewProjectedArrowSettings() - Method in interface nxopen.annotations.EditSettingsBuilder
-
Returns the projected view arrow Settings builder
License requirements: None.
- viewProjectedArrowSettings() - Method in interface nxopen.drawings.ViewStyleBuilder
-
Returns the projected Arrow Settings builder
License requirements: None.
- ViewProjectedArrowSettingsBuilder - Interface in nxopen.drawings
-
- ViewProjectedArrowSettingsBuilder.DimensionsStyleType - Class in nxopen.drawings
-
Represents arrowhead style
- ViewProjectedArrowSettingsBuilder.DispalyLabelType - Class in nxopen.drawings
-
Represents display label type
- viewProjectedLabel() - Method in interface nxopen.drafting.PreferencesBuilder
-
Returns the view projected label builder
License requirements: None.
- viewProjectedLabel() - Method in interface nxopen.drawings.EditViewLabelSettingsBuilder
-
Returns the view projected label builder
License requirements: None.
- viewProjectedLabel() - Method in interface nxopen.drawings.EditViewSettingsBuilder
-
Returns the view projected label builder
License requirements: None.
- ViewProjectedLabelBuilder - Interface in nxopen.drawings
-
- viewProjectedViewSettings() - Method in interface nxopen.drawings.ViewStyleBuilder
-
Returns the projected View Settings builder
License requirements: None.
- ViewProjectedViewSettingsBuilder - Interface in nxopen.drawings
-
- ViewProjectedViewSettingsBuilder.DisplayArrowOnParentViewType - Class in nxopen.drawings
-
Represents display arrow on parent view
- ViewProjectionBuilder - Interface in nxopen.drawings
-
- ViewProjectionBuilder.CurveType - Class in nxopen.drawings
-
the value of curve type in the setting group
- ViewProjectionBuilder.Types - Class in nxopen.drawings
-
the type of view projection
- ViewProjectionPlaneBuilder - Interface in nxopen.drawings
-
Represents the View Projection Plane (Drawings.ViewProjectionPlaneBuilder)
Created in NX6.0.2
- ViewProjectionPlaneBuilder.PlaneOptions - Class in nxopen.drawings
-
the plane options to select
- viewQuality() - Method in interface nxopen.drawings.GeneralViewStyle
-
Returns the view quality, that provides an alternative way to display
model geometry in a drawing view.
- viewQuality() - Method in interface nxopen.drawings.ViewStyleGeneralBuilder
-
Returns the view quality option on the GENERAL tab of the View Style Dialog
License requirements: None.
- viewQuality() - Method in interface nxopen.preferences.GeneralViewPreferences
-
Returns the view quality that provides alternative ways to display
geometry in a drawing member view.
- viewRepresentation() - Method in interface nxopen.drawings.GeneralViewStyle
-
Returns the view representation enum on the GENERAL tab of the View Style Dialog
License requirements: None.
- viewRepresentation() - Method in interface nxopen.drawings.ViewCreationWizardBuilder
-
Returns the view representation state
License requirements: None.
- viewRepresentation() - Method in interface nxopen.drawings.ViewStyleGeneralBuilder
-
Returns the view representation option on the GENERAL tab of the View Style Dialog
License requirements: None.
- viewRepresentation() - Method in interface nxopen.preferences.GeneralViewPreferences
-
Returns the view representation enum on the GENERAL tab of the View Style Dialog
License requirements: None.
- views() - Method in interface nxopen.annotations.AutomaticCenterlineBuilder
-
Returns the selected views
License requirements: None.
- views() - Method in interface nxopen.assemblies.HideComponentBuilder
-
Returns the drafting views from which components to hide
License requirements: None.
- views() - Method in interface nxopen.assemblies.ShowComponentBuilder
-
Returns the drafting views
License requirements: None.
- views() - Method in interface nxopen.BasePart
-
Returns the ViewCollection instance belonging to this part .
- views() - Method in interface nxopen.drafting.AnnotateViewsBuilder
-
Returns the views to annotate
License requirements: nx_drawing_auto ("NX Drawing Automation")
.
- views() - Method in interface nxopen.drafting.DistributeAnnotationsBuilder
-
Returns the views in which to distribute annotations.
- views() - Method in interface nxopen.drawings.SectionInViewBuilder
-
Returns the views
License requirements: None.
- views() - Method in interface nxopen.drawings.UpdateViewsBuilder
-
Returns the selected views
License requirements: drafting ("DRAFTING")
.
- views() - Method in interface nxopen.drawings.ViewCopyTo3dBuilder
-
Returns the selected views for multiple views selection
License requirements: nx_layout ("NX Layout")
.
- viewScale() - Method in interface nxopen.drafting.MoveToDrawingViewBuilder
-
Returns the view scale
License requirements: None.
- viewScale() - Method in interface nxopen.drawings.ViewCreationWizardBuilder
-
Returns the view scale
License requirements: None.
- viewScale - Variable in class nxopen.uf.UFDraw.ViewInfo
-
- ViewScaleBuilder - Interface in nxopen.drawings
-
Represents the View Scale (Drawings.ViewScaleBuilder)
Created in NX6.0.0
- ViewScaleBuilder.Type - Class in nxopen.drawings
-
The view scale type
- viewScalePosition - Variable in class nxopen.uf.UFDraw.ViewLabelParms
-
- viewScalePrefixFactor - Variable in class nxopen.uf.UFDraw.ViewLabelParms
-
- viewScaleTextFactor - Variable in class nxopen.uf.UFDraw.ViewLabelParms
-
- viewScaleValueFormat - Variable in class nxopen.uf.UFDraw.ViewLabelParms
-
- ViewSection - Interface in nxopen.preferences
-
Records / queries view section preferences.
- viewSectionLabel() - Method in interface nxopen.drafting.PreferencesBuilder
-
Returns the view section label builder
License requirements: None.
- viewSectionLabel() - Method in interface nxopen.drawings.EditViewLabelSettingsBuilder
-
Returns the view section label builder
License requirements: None.
- viewSectionLabel() - Method in interface nxopen.drawings.EditViewSettingsBuilder
-
Returns the view section label builder
License requirements: None.
- ViewSectionLabelBuilder - Interface in nxopen.drawings
-
- viewSectionLine() - Method in interface nxopen.drafting.PreferencesBuilder
-
- viewSectionLine() - Method in interface nxopen.drawings.EditSectionLineSettingsBuilder
-
Returns the view section line builder
License requirements: None.
- viewSectionLine() - Method in interface nxopen.drawings.SectionLineSettingsBuilder
-
Returns the Section Line builder
License requirements: None.
- ViewSectionLineBuilder - Interface in nxopen.drawings
-
- ViewSectionLineBuilder.DisplayType - Class in nxopen.drawings
-
specifies the section line symbol display
- ViewSectionLineBuilder.LocationType - Class in nxopen.drawings
-
specifies the label location for ISO128 section lines.
- ViewSectionLineBuilder.ShowSectionLineType - Class in nxopen.drawings
-
specifies the show section line options
- ViewSectionLineBuilder.StyleType - Class in nxopen.drawings
-
specifies the section line arrowhead style
- viewSectionLineStyleBuilder() - Method in interface nxopen.drawings.ViewStyleBuilder
-
Returns the view section line builder
License requirements: drafting ("DRAFTING")
.
- viewsInSet - Variable in class nxopen.uf.UFView.AskViewsOfViewSetData
-
- viewsPerSheet() - Method in interface nxopen.features.shipdesign.SectionDrawingBuilder
-
Returns the views per sheet
License requirements: None.
- viewStatus - Variable in class nxopen.uf.UFDraw.ViewInfo
-
- viewString() - Method in interface nxopen.cam.InspectionLinkPmiBuilder
-
Returns the PMI View selection string
License requirements: None.
- viewStyle() - Method in interface nxopen.drafting.MoveToDrawingViewBuilder
-
Returns the view style
License requirements: None.
- viewStyle() - Method in interface nxopen.drafting.PreferencesBuilder
-
Returns the view style builder
License requirements: None.
- viewStyle() - Method in interface nxopen.drawings.DrawingViewBuilder
-
Returns the view style
License requirements: None.
- viewStyle() - Method in interface nxopen.drawings.EditViewSettingsBuilder
-
Returns the view style builder
License requirements: None.
- viewStyle() - Method in interface nxopen.drawings.SectionViewBuilder
-
Returns the view style
License requirements: None.
- viewStyle() - Method in interface nxopen.drawings.StandardViewsBuilder
-
Returns the view style
License requirements: None.
- viewStyle() - Method in interface nxopen.drawings.ViewCreationWizardBuilder
-
Returns the view style
License requirements: None.
- ViewStyle - Interface in nxopen.drawings
-
Represents set of style applicable to drafting views.
- viewStyle() - Method in interface nxopen.preferences.PartDrafting
-
Returns the drafting view style type for preview when placing the view
License requirements: None.
- viewStyleBase() - Method in interface nxopen.drawings.ViewStyleBuilder
-
Returns the Base style builder of the view style builder which represents the base tab on the View Style Dialog
License requirements: drafting ("DRAFTING")
.
- ViewStyleBaseBuilder - Interface in nxopen.drawings
-
Represents the BASE tab on the View Style Dialog (Drawings.ViewStyleBaseBuilder)
Created in NX6.0.0
- ViewStyleBuilder - Interface in nxopen.drawings
-
Represents the View Style Builder (Drawings.ViewStyleBuilder) which manages all the style attributes related
to the view including base view, projected view, drawing view, detail view, broken view, section view etc.
- viewStyleDetail() - Method in interface nxopen.drawings.ViewStyleBuilder
-
Returns the Detail style builder of the view style builder which represents the detail tab on the View Style Dialog
License requirements: drafting ("DRAFTING")
.
- ViewStyleDetailBuilder - Interface in nxopen.drawings
-
Represents the DETAIL tab on the View Style Dialog (Drawings.ViewStyleDetailBuilder)
Created in NX6.0.0
- ViewStyleFPCalloutConfigBuilder - Interface in nxopen.drawings
-
Represents the Callout section of the Flat Pattern tab on the View Style Dialog (Drawings.ViewStyleFPCalloutsBuilder)
Created in NX9.0.0
- ViewStyleFPCalloutConfigBuilder.OrientationType - Class in nxopen.drawings
-
This enum represents orientation types for the flat pattern callouts
- ViewStyleFPCalloutsBuilder - Interface in nxopen.drawings
-
Represents the Callout section of the Flat Pattern tab on the View Style Dialog (Drawings.ViewStyleFPCalloutsBuilder)
Created in NX6.0.0
- ViewStyleFPCurvesBuilder - Interface in nxopen.drawings
-
Represents the Curve section of the Flat Pattern tab on the View Style Dialog (Drawings.ViewStyleFPCurvesBuilder)
Created in NX6.0.0
- viewStyleGeneral() - Method in interface nxopen.drawings.ViewStyleBuilder
-
Returns the General style builder of the view style builder which represents the general tab on the View Style Dialog
License requirements: drafting ("DRAFTING")
.
- ViewStyleGeneralBuilder - Interface in nxopen.drawings
-
Represents view style general builder (Drawings.ViewStyleGeneralBuilder) which manages all the general
attributes which are necessary for all the views.
- viewStyleHiddenLines() - Method in interface nxopen.drawings.ViewStyleBuilder
-
Returns the Hidden Lines style builder of the view style builder which represents the hidden lines tab on the View Style Dialog
License requirements: drafting ("DRAFTING")
.
- ViewStyleHiddenLinesBuilder - Interface in nxopen.drawings
-
Represents the HIDDEN LINES tab on the View Style Dialog (Drawings.ViewStyleHiddenLinesBuilder)
Created in NX6.0.0
- viewStyleInheritPmi() - Method in interface nxopen.drawings.ViewStyleBuilder
-
Returns the Inherit PMI style builder of the view style builder which represents the inherit PMI tab on the View Style Dialog
License requirements: drafting ("DRAFTING")
.
- ViewStyleInheritPmiBuilder - Interface in nxopen.drawings
-
Represents the INHERIT PMI tab on the View Style Dialog (Drawings.ViewStyleInheritPmiBuilder)
Created in NX6.0.0
- viewStyleOrientation() - Method in interface nxopen.drawings.ViewStyleBuilder
-
Returns the Orientation style builder of the view style builder which represents the orientation tab on the View Style Dialog
License requirements: drafting ("DRAFTING")
.
- ViewStyleOrientationBuilder - Interface in nxopen.drawings
-
Represents the ORIENTATION tab on the View Style Dialog (Drawings.ViewStyleOrientationBuilder)
Created in NX6.0.0
- viewStylePerspective() - Method in interface nxopen.drawings.ViewStyleBuilder
-
Returns the Perspective style builder of the view style builder which represents the perspective tab on the View Style Dialog
License requirements: drafting ("DRAFTING")
.
- ViewStylePerspectiveBuilder - Interface in nxopen.drawings
-
Represents the PERSPECTIVE tab on the View Style Dialog (Drawings.ViewStylePerspectiveBuilder)
Created in NX6.0.0
- viewStyleProjected() - Method in interface nxopen.drawings.ViewStyleBuilder
-
Returns the projected style builder of the view style builder which represents the projected tab on the View Style Dialog
License requirements: drafting ("DRAFTING")
.
- ViewStyleProjectedBuilder - Interface in nxopen.drawings
-
Represents the PROJECTED tab on the View Style Dialog (Drawings.ViewStyleProjectedBuilder)
Created in NX6.0.0
- viewStyleSection() - Method in interface nxopen.drawings.ViewStyleBuilder
-
Returns the Section style builder of the view style builder which represents the section tab on the View Style Dialog
License requirements: drafting ("DRAFTING")
.
- ViewStyleSectionBuilder - Interface in nxopen.drawings
-
Represents the SECTION tab on the View Style Dialog (Drawings.ViewStyleSectionBuilder)
Created in NX6.0.0
- viewStyleSectionConstraints() - Method in interface nxopen.drawings.ViewStyleBuilder
-
Returns the Section Constraints style builder of the view style builder which represents the section constraints tab on the View Style Dialog
License requirements: drafting ("DRAFTING")
.
- ViewStyleSectionConstraintsBuilder - Interface in nxopen.drawings
-
Represents the SECTION CONSTRAINTS tab on the View Style Dialog (Drawings.ViewStyleSectionConstraintsBuilder)
Created in NX6.0.0
- viewStyleShading() - Method in interface nxopen.drawings.ViewStyleBuilder
-
Returns the Shading style builder of the view style builder which represents the shading tab on the View Style Dialog
License requirements: drafting ("DRAFTING")
.
- ViewStyleShadingBuilder - Interface in nxopen.drawings
-
Represents the SHADING tab on the View Style Dialog (Drawings.ViewStyleShadingBuilder)
Created in NX6.0.0
- ViewStyleShipbuildingLinesBuilder - Interface in nxopen.drawings
-
- ViewStyleShipbuildingLinesBuilderList - Interface in nxopen.drawings
-
Represents a list of objects.
- viewStyleShipDraftingViewLinesList() - Method in interface nxopen.drawings.ViewStyleBuilder
-
Returns the Ship Drafting View lines builder of the view style builder which represents the ship drafting view lines on the View Style Dialog
License requirements: nx_ship_drafting ("Ship Drafting")
.
- viewStyleSingleLineList() - Method in interface nxopen.drawings.ViewStyleBuilder
-
Returns the Ship building lines style builder of the view style builder which represents the ship building lines tab on the View Style Dialog
License requirements: drafting ("DRAFTING")
.
- viewStyleSmoothEdges() - Method in interface nxopen.drawings.ViewStyleBuilder
-
Returns the Smooth Edges style builder of the view style builder which represents the smooth edges tab on the View Style Dialog
License requirements: drafting ("DRAFTING")
.
- ViewStyleSmoothEdgesBuilder - Interface in nxopen.drawings
-
Represents the SMOOTH EDGES tab on the View Style Dialog (Drawings.ViewStyleSmoothEdgesBuilder)
Created in NX6.0.0
- viewStyleThreads() - Method in interface nxopen.drawings.ViewStyleBuilder
-
Returns the Threads style builder of the view style builder which represents the threads tab on the View Style Dialog
License requirements: drafting ("DRAFTING")
.
- ViewStyleThreadsBuilder - Interface in nxopen.drawings
-
Represents the THREADS tab on the View Style Dialog (Drawings.ViewStyleThreadsBuilder)
Created in NX6.0.0
- viewStyleTraceLines() - Method in interface nxopen.drawings.ViewStyleBuilder
-
Returns the Trace lines style builder of the view style builder which represents the trace lines tab on the View Style Dialog
License requirements: drafting ("DRAFTING")
.
- ViewStyleTraceLinesBuilder - Interface in nxopen.drawings
-
Represents the TRACE LINES tab on the View Style Dialog (Drawings.ViewStyleTraceLinesBuilder)
Created in NX6.0.0
- viewStyleVirtualIntersections() - Method in interface nxopen.drawings.ViewStyleBuilder
-
Returns the Virtual intersections style builder of the view style builder which represents the virtual intersections tab on the View Style Dialog
License requirements: drafting ("DRAFTING")
.
- ViewStyleVirtualIntersectionsBuilder - Interface in nxopen.drawings
-
Represents the VIRTUAL INTERSECTIONS tab on the View Style Dialog (Drawings.ViewStyleVirtualIntersectionsBuilder)
Created in NX6.0.0
- viewStyleVisibleLines() - Method in interface nxopen.drawings.ViewStyleBuilder
-
Returns the Visible lines style builder of the view style builder which represents the visible lines tab on the View Style Dialog
License requirements: drafting ("DRAFTING")
.
- ViewStyleVisibleLinesBuilder - Interface in nxopen.drawings
-
Represents the VISIBLE LINES tab on the View Style Dialog (Drawings.ViewStyleVisibleLinesBuilder)
Created in NX6.0.0
- viewTag - Variable in class nxopen.uf.UFDisp.Inquire
-
- viewTag - Variable in class nxopen.uf.UFDraw.AskBreakoutData
-
- viewTag - Variable in class nxopen.uf.UFDraw.AskSimplifiedCurveData
-
- viewTag - Variable in class nxopen.uf.UFDraw.AskViewsData
-
- viewTag - Variable in class nxopen.uf.UFDraw.BreakRegionData
-
- viewTag - Variable in class nxopen.uf.UFView.VdeData
-
- viewTag - Variable in class nxopen.uf.UFView.VdeDataAndType
-
- viewTracking() - Method in interface nxopen.preferences.PartDrafting
-
Returns the flag indicating whether to track a drafting view during preview
when placing the view.
- viewType() - Method in interface nxopen.drawings.StandardViewsBuilder
-
Returns the view type
License requirements: None.
- viewUnfolded() - Method in interface nxopen.drawings.SectionViewBuilder
-
- viewValidationResults() - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder
-
Returns the indication if the packaging validation gadget is invoked to view the results.
- ViewVisualizationSpecialEffects - Interface in nxopen.preferences
-
Represents the set of visualization special effect preferences applicable to entire session.
- ViewVisualizationSpecialEffects.ColorHLS - Class in nxopen.preferences
-
Represents three constituents of a HLS color pattern
- ViewVisualizationSpecialEffects.ColorHSV - Class in nxopen.preferences
-
Represents three constituents of a HSV color pattern
- ViewVisualizationSpecialEffects.ColorRGB - Class in nxopen.preferences
-
Represents three constituents of a RGB color pattern
- ViewVisualizationSpecialEffects.FogData - Class in nxopen.preferences
-
Represents the constituents of fog data
- ViewVisualizationSpecialEffects.FogType - Class in nxopen.preferences
-
Describes whether the fog type is selected as linear or light or heavy.
- ViewVisualizationVisual - Interface in nxopen.preferences
-
Represents the set of View related Visualization visual preferences
To obtain an instance of this class, refer to
View
Created in NX3.0.0
- ViewVisualizationVisual.DisplayAppearanceOptions - Class in nxopen.preferences
-
Describes the rendering style and the appearance of edges and silhouettes in the view.
- ViewVisualizationVisual.DisplayModeType - Class in nxopen.preferences
-
- ViewVisualizationVisual.HiddenEdges - Class in nxopen.preferences
-
Describes the appearance of hidden edges displayed in the view.
- ViewVisualizationVisual.HiddenEdgeStyleType - Class in nxopen.preferences
-
Describes how hidden edges are displayed for shaded faces in the view.
- ViewVisualizationVisual.HiddenEdgesType - Class in nxopen.preferences
-
- ViewVisualizationVisual.RenderingStyle - Class in nxopen.preferences
-
Describes the rendering style for geometry displayed in the view.
- ViewVisualizationVisual.ShadedEdgeStyleType - Class in nxopen.preferences
-
Describes how edges are displayed for shaded faces in the view.
- ViewVisualizationVisual.SmoothEdgeFont - Class in nxopen.preferences
-
Describes all possible font selection for visible smooth edges
- ViewVisualizationVisual.SmoothEdgeWidth - Class in nxopen.preferences
-
Describes all possible width selection for visible smooth edges
- ViewVisualizationVisual.SurfaceDisplayOptions - Class in nxopen.preferences
-
- ViewVisualizationVisual.TrueSurfaceDisplayPref - Class in nxopen.preferences
-
- viewWorkflow() - Method in interface nxopen.drafting.PreferencesBuilder
-
Returns the view workflow builder
License requirements: None.
- ViewWorkflowBuilder - Interface in nxopen.drawings
-
- ViewWorkflowBuilder.Display - Class in nxopen.drawings
-
Represents the extracted edge face display option
- ViewWorkflowBuilder.Handlingbodies - Class in nxopen.drawings
-
- ViewWorkflowBuilder.HandlingBodiesType - Class in nxopen.drawings
-
Represents option for handling bodies with no valid lightweight data
- ViewWorkflowBuilder.Style - Class in nxopen.drawings
-
Represents the preview stle option
- violationAction() - Method in interface nxopen.preferences.SessionMeasureRequirements
-
Returns the violation action.
- ViolationLocationData() - Constructor for class nxopen.routing.DesignRuleViolation.ViolationLocationData
-
- violations - Variable in class nxopen.uf.UFRoute.CheckDesignRulesData
-
- violations - Variable in class nxopen.uf.UFRule.AskObjectViolationsData
-
- violations - Variable in class nxopen.uf.UFRule.AskOverrideViolationsData
-
- violations - Variable in class nxopen.uf.UFRule.AskRuleViosData
-
- violations - Variable in class nxopen.uf.UFRule.AskRuleViosSinceData
-
- VIOLET_VIOLET_BLUE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- VIOLET_VIOLET_MAGENTA_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- virts - Variable in class nxopen.uf.UFRoute.AskMultiportTerminalsData
-
- VIRTUAL_INTERSECT_OFF - Static variable in class nxopen.uf.UFDraw.VirtualIntersect
-
- VIRTUAL_INTERSECT_ON - Static variable in class nxopen.uf.UFDraw.VirtualIntersect
-
- VIRTUAL_INTERSECTION - Static variable in class nxopen.features.VirtualCurveBuilder.Types
-
Virtual intersection
- virtualAxis() - Method in interface nxopen.mechatronics.PhysicsManager
-
- VirtualAxisBuilder - Interface in nxopen.mechatronics
-
- VirtualAxisBuilder.VirtualAxisType - Class in nxopen.mechatronics
-
the Axis Type option.
- VirtualAxisCollection - Interface in nxopen.mechatronics
-
Represents a collection of Virtual Axis.
- VirtualBlendEdgeBuilder - Interface in nxopen.features
-
- VirtualCurve - Interface in nxopen.features
-
Represents a virtual curve feature
To create or edit an instance of this class, use
VirtualCurveBuilder
Created in NX7.5.0
- VirtualCurveBuilder - Interface in nxopen.features
-
- VirtualCurveBuilder.Types - Class in nxopen.features
-
the type of virtual curve
- virtualIntersect - Variable in class nxopen.uf.UFDraw.ViewPrfs
-
- virtualIntersectColor - Variable in class nxopen.uf.UFDraw.ViewPrfs
-
- virtualIntersectFont - Variable in class nxopen.uf.UFDraw.ViewPrfs
-
- virtualIntersectGap - Variable in class nxopen.uf.UFDraw.ViewPrfs
-
- virtualIntersectGapSize - Variable in class nxopen.uf.UFDraw.ViewPrfs
-
- virtualIntersection() - Method in interface nxopen.drawings.VirtualIntersectionsViewStyle
-
Returns the status of virtual intersection.
- virtualIntersection() - Method in interface nxopen.preferences.VirtualIntersectionsViewPreferences
-
Returns the status of virtual intersection.
- virtualInterSectionColor() - Method in interface nxopen.drawings.CustomViewSettingsBuilder
-
Returns the virtual inter section color
License requirements: None.
- virtualInterSectionFont() - Method in interface nxopen.drawings.CustomViewSettingsBuilder
-
Returns the virtual inter section font
License requirements: None.
- virtualIntersections() - Method in interface nxopen.drawings.ViewStyle
-
Returns object for doing View style settings applicable to VirtualIntersections .
- virtualIntersections() - Method in interface nxopen.drawings.ViewStyleVirtualIntersectionsBuilder
-
Returns the virtual intersections toggle on the VIRTUAL INTERSECTIONS tab of the View Style Dialog
License requirements: None.
- virtualIntersections() - Method in interface nxopen.preferences.ViewPreferences
-
Returns object for doing View Preferences settings applicable to VirtualIntersections .
- VirtualIntersectionsViewPreferences - Interface in nxopen.preferences
-
Represents set of Virtual Intersections View Preferences applicable to drafting views.
- VirtualIntersectionsViewStyle - Interface in nxopen.drawings
-
Represents set of Virtual Intersections View Style Preferences applicable to drafting views.
- virtualInterSectionWidth() - Method in interface nxopen.drawings.CustomViewSettingsBuilder
-
Returns the virtual inter section width
License requirements: None.
- virtualIntersectWidth - Variable in class nxopen.uf.UFDraw.ViewPrfs
-
- virtualReferenceId() - Method in interface nxopen.routing.RunItemsBuilder
-
Returns the virtual reference Id for FROM/TO items of a run.
- viscous() - Method in interface nxopen.cae.responsesimulation.NormalMode
-
Returns the viscous factor
License requirements: nx_response_anlys ("NX Response Analysis")
.
- viscous() - Method in interface nxopen.motion.NormalModeProperty
-
Returns the viscous factor
License requirements: mechanisms ("MECHANISMS")
.
- VISED_HIDDEN_TEXT_REASON - Static variable in class nxopen.uf.UFCgm.ExportReason
-
- visibility() - Method in interface nxopen.cae.xyplot.TextBoxStyleSetting
-
Returns a value indicating whether to display the text box
License requirements: None.
- visibility - Variable in class nxopen.Session.UndoMarkData
-
visibility of the mark
- visibility() - Method in interface nxopen.SmartObject
-
Returns the visibility.
- VISIBILITY - Static variable in class nxopen.tooling.AssemblyDrawingBuilder.Types
-
- visibility() - Method in interface nxopen.uistyler.ButtonLayout
-
Returns the visibility
License requirements: None.
- visibility() - Method in interface nxopen.uistyler.ColorTool
-
Returns the visibility
License requirements: None.
- visibility() - Method in interface nxopen.uistyler.GroupBox
-
Returns the visibility
License requirements: None.
- visibility() - Method in interface nxopen.uistyler.IntegerItem
-
Returns the visibility of the dialog item.
- visibility() - Method in interface nxopen.uistyler.IntegerScale
-
Returns the visibility of the dialog item.
- visibility() - Method in interface nxopen.uistyler.LabelItem
-
Returns the visibility of the dialog item
License requirements: None.
- visibility() - Method in interface nxopen.uistyler.MultiSelectList
-
Returns the visibility
License requirements: None.
- visibility() - Method in interface nxopen.uistyler.MultiTextBox
-
Returns the visibility of the dialog item
License requirements: None.
- visibility() - Method in interface nxopen.uistyler.OptionMenu
-
Returns the visibility
License requirements: None.
- visibility() - Method in interface nxopen.uistyler.OptionToggle
-
Returns the visibility
License requirements: None.
- visibility() - Method in interface nxopen.uistyler.PropertyPage
-
Returns the visibility of the dialog item.
- visibility() - Method in interface nxopen.uistyler.PushButton
-
Returns the visibility of dialog.
- visibility() - Method in interface nxopen.uistyler.RadioBox
-
Returns the visibility
License requirements: None.
- visibility() - Method in interface nxopen.uistyler.RealItem
-
Returns the visibility
License requirements: None.
- visibility() - Method in interface nxopen.uistyler.RealScale
-
Returns the visibility
License requirements: None.
- visibility() - Method in interface nxopen.uistyler.RowColumn
-
Returns the visibility
License requirements: None.
- visibility() - Method in interface nxopen.uistyler.ScrolledWindow
-
Returns
License requirements: None.
- visibility() - Method in interface nxopen.uistyler.SelectionBox
-
Returns the visibility of the selection box
License requirements: None.
- visibility() - Method in interface nxopen.uistyler.Separator
-
Returns the visibility of the separator
License requirements: None.
- visibility() - Method in interface nxopen.uistyler.SingleSelectList
-
Returns the visibility of the single select list
License requirements: None.
- visibility() - Method in interface nxopen.uistyler.StringItem
-
Returns the visibility of the dialog item
License requirements: None.
- visibility() - Method in interface nxopen.uistyler.TabControl
-
Returns the visibility of the dialog item
License requirements: None.
- visibility() - Method in interface nxopen.uistyler.Toggle
-
Returns the visibility of the toggle
License requirements: None.
- visibility() - Method in interface nxopen.uistyler.ToolPalette
-
Returns the visibility of the dialog item
License requirements: None.
- visibility() - Method in interface nxopen.uistyler.WideString
-
Returns the visibility of the wide string
License requirements: None.
- visibility() - Method in interface nxopen.WCS
-
Returns the visibility of the WCS
License requirements: None.
- VISIBILITY2BIG - Static variable in class nxopen.uf.UFUndo.UserVisibility
-
- visibilityCoordinates() - Method in interface nxopen.geometricanalysis.LocalRadiusAnalysisBuilder
-
Returns the toggle coordinates
License requirements: None.
- visibilityMaxRadius() - Method in interface nxopen.geometricanalysis.LocalRadiusAnalysisBuilder
-
Returns the toggle max radius show
License requirements: None.
- visibilityMinMaxRadiusTangent() - Method in interface nxopen.geometricanalysis.LocalRadiusAnalysisBuilder
-
Returns the toggle min radius tangent
License requirements: None.
- visibilityMinRadius() - Method in interface nxopen.geometricanalysis.LocalRadiusAnalysisBuilder
-
Returns the toggle min radius show
License requirements: None.
- visibilityOfConstraints() - Method in interface nxopen.Sketch
-
- visibilityRadius() - Method in interface nxopen.geometricanalysis.LocalRadiusAnalysisBuilder
-
Returns the toggle radius show
License requirements: None.
- visibilityURadius() - Method in interface nxopen.geometricanalysis.LocalRadiusAnalysisBuilder
-
Returns the toggle uradius show
License requirements: None.
- visibilityUV() - Method in interface nxopen.geometricanalysis.LocalRadiusAnalysisBuilder
-
Returns the toggle uv
License requirements: None.
- visibilityUVTangent() - Method in interface nxopen.geometricanalysis.LocalRadiusAnalysisBuilder
-
Returns the toggle max radius tangent
License requirements: None.
- visibilityVRadius() - Method in interface nxopen.geometricanalysis.LocalRadiusAnalysisBuilder
-
Returns the toggle vradius show
License requirements: None.
- VISIBLE - Static variable in class nxopen.drawings.ShipbuildingLinesViewStyle.Lines
-
Visible
- VISIBLE - Static variable in class nxopen.layer.State
-
Objects on the layer are visible but not selectable
- visible() - Method in interface nxopen.markup.MarkupObject
-
Returns the visible
License requirements: None.
- VISIBLE - Static variable in class nxopen.PartCollection.WorkComponentOption
-
If the given work component is not visible, chose another component that
represents the same part.
- VISIBLE - Static variable in class nxopen.preferences.ShipbuildingLinesViewPreferences.Lines
-
Visible
- VISIBLE - Static variable in class nxopen.preferences.ViewVisualizationVisual.HiddenEdges
-
- VISIBLE - Static variable in class nxopen.preferences.ViewVisualizationVisual.HiddenEdgesType
-
Deprecated.
All edges in a solid body that are hidden appear
as solid lines
- VISIBLE - Static variable in class nxopen.Session.MarkVisibility
-
- VISIBLE - Static variable in class nxopen.SmartObject.VisibilityOption
-
- VISIBLE - Static variable in class nxopen.uf.UFSo.VisibilityOption
-
- VISIBLE - Static variable in class nxopen.uf.UFUndo.UserVisibility
-
- visible - Variable in class nxopen.uf.UFView.AskVisibleObjectsData
-
- VISIBLE_BODIES - Static variable in class nxopen.cae.FemPart.UseBodiesOption
-
Use all visible bodies from the cad part
- VISIBLE_IF_PARENT_INVISIBLE - Static variable in class nxopen.SmartObject.VisibilityOption
-
Visible if a parent is not loaded (for extract).
- VISIBLE_IF_PARENT_INVISIBLE - Static variable in class nxopen.uf.UFSo.VisibilityOption
-
- VISIBLE_MODEL - Static variable in class nxopen.cae.modelcheck.ElementEdgeCheckBuilder.Scope
-
Only takes visible elements into account while computing
- VISIBLE_NONSECTION - Static variable in class nxopen.drawings.ShipDraftingViewLinesViewStyle.Lines
-
Visible, NonSection
- VISIBLE_NONSECTION - Static variable in class nxopen.preferences.ShipDraftingViewLinesViewPreferences.Lines
-
Visible, NonSection
- VISIBLE_OBJECT - Static variable in class nxopen.preferences.PartVisualizationShade.ViewUpdateModeType
-
Applicable only to visible object
- VISIBLE_OBJECTS - Static variable in class nxopen.display.FacetSettingsBuilder.FacetUpdate
-
- VISIBLE_OBJECTS - Static variable in class nxopen.uf.UFView.CycleObjects
-
- VISIBLE_SCROLLABLE_ITEMS - Static variable in class nxopen.uf.UFCamPref.CamPref
-
- VISIBLE_SECTION - Static variable in class nxopen.drawings.ShipDraftingViewLinesViewStyle.Lines
-
Visible, Section
- VISIBLE_SECTION - Static variable in class nxopen.preferences.ShipDraftingViewLinesViewPreferences.Lines
-
Visible, Section
- visibleColor() - Method in interface nxopen.drawings.TraceLinesViewStyle
-
Returns the visible color.
- visibleColor() - Method in interface nxopen.drawings.ViewStyleShipbuildingLinesBuilder
-
Returns the visible line color on the SHIPBUILDING LINES tab of the View Style Dialog
License requirements: None.
- visibleColor() - Method in interface nxopen.drawings.ViewStyleTraceLinesBuilder
-
Returns the visible color on the TRACE LINES tab of the View Style Dialog
License requirements: None.
- visibleColor() - Method in interface nxopen.drawings.ViewStyleVisibleLinesBuilder
-
Returns the visible color on the VISIBLE LINES tab of the View Style Dialog
License requirements: None.
- visibleColor() - Method in interface nxopen.drawings.VisibleLinesViewStyle
-
Returns the visible color.
- visibleColor() - Method in interface nxopen.features.vehicledesign.AllAroundVisionBuilder
-
Returns the color of the visible area.
- visibleColor() - Method in interface nxopen.preferences.TraceLinesViewPreferences
-
Returns the visible color.
- visibleColor() - Method in interface nxopen.preferences.VisibleLinesViewPreferences
-
Returns the visible color.
- visibleConstraintsRule() - Method in interface nxopen.assemblies.ConstraintDisplayBuilder
-
Returns the rule determining which constraints are treated as connected to the selected components.
- visibleFont() - Method in interface nxopen.drawings.TraceLinesViewStyle
-
Returns the visible font
License requirements: None.
- visibleFont() - Method in interface nxopen.drawings.ViewStyleShipbuildingLinesBuilder
-
Returns the visible line font on the SHIPBUILDING LINES tab of the View Style Dialog
License requirements: None.
- visibleFont() - Method in interface nxopen.drawings.ViewStyleTraceLinesBuilder
-
Returns the visible font on the TRACE LINES tab of the View Style Dialog
License requirements: None.
- visibleFont() - Method in interface nxopen.drawings.ViewStyleVisibleLinesBuilder
-
Returns the visible font on the VISIBLE LINES tab of the View Style Dialog
License requirements: None.
- visibleFont() - Method in interface nxopen.drawings.VisibleLinesViewStyle
-
Returns the visible font.
- visibleFont() - Method in interface nxopen.preferences.TraceLinesViewPreferences
-
Returns the visible font
License requirements: None.
- visibleFont() - Method in interface nxopen.preferences.VisibleLinesViewPreferences
-
Returns the visible font.
- visibleLineColor - Variable in class nxopen.uf.UFDraw.RenderPrefs
-
- visibleLineColor - Variable in class nxopen.uf.UFDraw.ViewPrfs
-
- visibleLineColorFontWidth() - Method in interface nxopen.drawings.AutomationBookletBuilder
-
Returns the visible line color font width
License requirements: None.
- visibleLineFont - Variable in class nxopen.uf.UFDraw.RenderPrefs
-
- visibleLineFont - Variable in class nxopen.uf.UFDraw.ViewPrfs
-
- visibleLines() - Method in interface nxopen.drawings.ViewStyle
-
Returns object for doing View style settings applicable to VisibleLines .
- visibleLines() - Method in interface nxopen.preferences.ViewPreferences
-
Returns object for doing View Preferences settings applicable to VisibleLines .
- VisibleLinesViewPreferences - Interface in nxopen.preferences
-
Represents set of Visible Lines View Preferences applicable to drafting views.
- VisibleLinesViewStyle - Interface in nxopen.drawings
-
Represents set of Visible Lines View Style Preferences applicable to drafting views.
- visibleLineWidth - Variable in class nxopen.uf.UFDraw.RenderPrefs
-
- visibleLineWidth - Variable in class nxopen.uf.UFDraw.ViewPrfs
-
- visibleManipulatorHandles() - Method in interface nxopen.blockstyler.SpecifyOrientation
-
Returns the VisibleManipulatorHandles.
- visibleScrollableItems - Variable in class nxopen.uf.UFCam.Preferences
-
- visibleWidth() - Method in interface nxopen.drawings.TraceLinesViewStyle
-
Returns the visible width
License requirements: None.
- visibleWidth() - Method in interface nxopen.drawings.ViewStyleShipbuildingLinesBuilder
-
Returns the visible line width on the SHIPBUILDING LINES tab of the View Style Dialog
License requirements: None.
- visibleWidth() - Method in interface nxopen.drawings.ViewStyleTraceLinesBuilder
-
Returns the visible width on the TRACE LINES tab of the View Style Dialog
License requirements: None.
- visibleWidth() - Method in interface nxopen.drawings.ViewStyleVisibleLinesBuilder
-
Returns the visible width on the VISIBLE LINES tab of the View Style Dialog
License requirements: None.
- visibleWidth() - Method in interface nxopen.drawings.VisibleLinesViewStyle
-
Returns the visible width.
- visibleWidth() - Method in interface nxopen.preferences.TraceLinesViewPreferences
-
Returns the visible width
License requirements: None.
- visibleWidth() - Method in interface nxopen.preferences.VisibleLinesViewPreferences
-
Returns the visible width.
- visibleWireframeColor() - Method in interface nxopen.drawings.ViewStyleShadingBuilder
-
Returns the visible wireframe color on the SHADING tab of the View Style Dialog
License requirements: None.
- visionAreaRadius() - Method in interface nxopen.features.vehicledesign.AllAroundVisionBuilder
-
Returns the radius of a circle definiing the vision area.
- VisionPlane - Interface in nxopen.features.vehicledesign
-
Represents a vision plane feature.
- VisionPlaneBuilder - Interface in nxopen.features.vehicledesign
-
Represents a
VisionPlane
builder used to create or edit a Vision Plane.
- VisionPlaneBuilder.CustomVisionAngle - Class in nxopen.features.vehicledesign
-
Represents the vision angle type to define the Vision Plane.
- VisionPlaneBuilder.EnumEyeType - Class in nxopen.features.vehicledesign
-
Represents the eye definition type to define the Vision Plane.
- visionType() - Method in interface nxopen.features.vehicledesign.VisionPlaneBuilder
-
Returns the vision type; standard or customer defined.
- visionType() - Method in interface nxopen.features.vehicledesign.WindshieldDatumBuilder
-
Returns the vision type; standard or customer defined.
- VISUAL - Static variable in class nxopen.geometricanalysis.GapFlushnessBuilder.EvaluationTypes
-
visual
- VISUAL_BASIC - Static variable in class nxopen.preferences.SessionUserInterface.JournalLanguageType
-
- VISUAL_GAP - Static variable in class nxopen.features.SilhouetteFlangeBuilder.Types
-
Visual gap Silhouette Flange
- visualization() - Method in interface nxopen.features.vehicledesign.BumperPendulumBuilder
-
Returns the visualization type of the bumper pendulum output.
- visualization() - Method in interface nxopen.features.vehicledesign.DynamicCurbBuilder
-
Returns the visualization type of the dynamic curb output.
- visualization() - Method in interface nxopen.features.vehicledesign.GroundClearanceBuilder
-
Returns the visualization type of the ground clearance output.
- visualization() - Method in interface nxopen.features.vehicledesign.InnerAngleBuilder
-
Returns
the visualization type of the inner angle output.
- visualization() - Method in interface nxopen.features.vehicledesign.OilPanBuilder
-
Returns the visualization type of the oil pan output.
- visualization() - Method in interface nxopen.features.vehicledesign.SlopeBuilder
-
Returns
the visualization type of the slope output.
- visualization() - Method in interface nxopen.features.vehicledesign.StaticCurbBuilder
-
Returns
the visualization type of the static curb output.
- Visualization() - Constructor for class nxopen.uf.UFView.Visualization
-
- Visualization(int, int, int, UFView.SmoothEdges, int, int, int, double, int, double[], double, double, double) - Constructor for class nxopen.uf.UFView.Visualization
-
- visualizationData() - Method in interface nxopen.SaveOptions
-
Returns the option indicating whether to generate Teamcenter Visualization
.jt files when a part is saved
License requirements: None.
- visualizationFonts() - Method in interface nxopen.preferences.SessionPreferences
-
Returns the Visualization Fonts preferences .
- VisualizationFonts - Interface in nxopen.preferences
-
Represents visualization preferences for standard text fonts
applicable to the entire session
To obtain an instance of this class, refer to
SessionPreferences
Created in NX8.0.0
- VisualizationFonts.DefaultStandardTextFontData - Class in nxopen.preferences
-
- VisualizationFonts.StyleType - Class in nxopen.preferences
-
Specifies the font style.
- visualizationHandles() - Method in interface nxopen.preferences.SessionPreferences
-
Returns the Visualization Handles preferences .
- VisualizationHandles - Interface in nxopen.preferences
-
Represents the set of visualization preferences under handles tab applicable to entire session
To obtain an instance of this class, refer to
SessionPreferences
Created in NX7.5.0
- VisualizationHandles.HandleSizeValue - Class in nxopen.preferences
-
Specifies size values for the default handle size.
- VisualizationLine - Interface in nxopen.preferences
-
This class is for UI related preferences changes
To obtain an instance of this class, refer to
UI
Created in NX3.0.0
- visualizationLinePreferences() - Method in interface nxopen.UI
-
the UI based Visualization Preferences under Line Tab in the current session .
- visualizationShadingPreferences() - Method in interface nxopen.UI
-
the UI based Visualization Preferences under Shading Tab in the current session .
- visualizationSpecialEffectsPreferences() - Method in interface nxopen.View
-
Returns an object to perform all visualization Special Effects related preferences settings .
- visualizationVisualPreferences() - Method in interface nxopen.UI
-
the UI based Visualization Preferences under Visual Tab in the current session .
- visualizationVisualPreferences() - Method in interface nxopen.View
-
Returns an object to perform all visualization related preferences settings .
- VISUALIZE - Static variable in class nxopen.sim.KinematicSinumerikCaBuilder.PlcUsageTypes
-
Visualize
- visualize2dTool1Color() - Method in interface nxopen.cam.Preferences
-
- visualize2dTool2Color() - Method in interface nxopen.cam.Preferences
-
- visualize2dTool3Color() - Method in interface nxopen.cam.Preferences
-
- visualize2dTool4Color() - Method in interface nxopen.cam.Preferences
-
- visualize2dTool5Color() - Method in interface nxopen.cam.Preferences
-
- VISUALIZE_AUTO_BLOCK_COLOR - Static variable in class nxopen.uf.UFCamPref.CamPref
-
- VISUALIZE_COLLISION_COLOR - Static variable in class nxopen.uf.UFCamPref.CamPref
-
- VISUALIZE_DMR_TOOL1COLOR - Static variable in class nxopen.uf.UFCamPref.CamPref
-
- VISUALIZE_DMR_TOOL2COLOR - Static variable in class nxopen.uf.UFCamPref.CamPref
-
- VISUALIZE_DMR_TOOL3COLOR - Static variable in class nxopen.uf.UFCamPref.CamPref
-
- VISUALIZE_DMR_TOOL4COLOR - Static variable in class nxopen.uf.UFCamPref.CamPref
-
- VISUALIZE_DMR_TOOL5COLOR - Static variable in class nxopen.uf.UFCamPref.CamPref
-
- VISUALIZE_EXCESS_MATERIAL_COLOR - Static variable in class nxopen.uf.UFCamPref.CamPref
-
- VISUALIZE_GOUGE_COLOR - Static variable in class nxopen.uf.UFCamPref.CamPref
-
- VISUALIZE_TOOL_DISPLAY_COLOR - Static variable in class nxopen.uf.UFCamPref.CamPref
-
- visualizeAnimationAccuracy() - Method in interface nxopen.cam.Preferences
-
Returns the animation accuracy
License requirements: None.
- visualizeAutoBlockColor() - Method in interface nxopen.cam.Preferences
-
- visualizeBackgroundColor() - Method in interface nxopen.cam.Preferences
-
Returns the background color
License requirements: None.
- visualizeChordalTolerance() - Method in interface nxopen.cam.Preferences
-
- visualizeCollisionsColor() - Method in interface nxopen.cam.Preferences
-
Returns the collisions color
License requirements: None.
- visualizeDynamicToolAxis() - Method in interface nxopen.cam.Preferences
-
Returns the dynamic tool axis
License requirements: None.
- visualizeExcessMaterialColor() - Method in interface nxopen.cam.Preferences
-
Returns the excess material color
License requirements: None.
- visualizeGougesColor() - Method in interface nxopen.cam.Preferences
-
Returns the gouges color
License requirements: None.
- visualizeIpwColor() - Method in interface nxopen.cam.Preferences
-
Returns the ipw color
License requirements: None.
- visualizeIpwDmrColor1() - Method in interface nxopen.cam.Preferences
-
Returns the ipw dmr color1
License requirements: None.
- visualizeIpwDmrColor10() - Method in interface nxopen.cam.Preferences
-
Returns the ipw dmr color10
License requirements: None.
- visualizeIpwDmrColor2() - Method in interface nxopen.cam.Preferences
-
Returns the ipw dmr color2
License requirements: None.
- visualizeIpwDmrColor3() - Method in interface nxopen.cam.Preferences
-
Returns the ipw dmr color3
License requirements: None.
- visualizeIpwDmrColor4() - Method in interface nxopen.cam.Preferences
-
Returns the ipw dmr color4
License requirements: None.
- visualizeIpwDmrColor5() - Method in interface nxopen.cam.Preferences
-
Returns the ipw dmr color5
License requirements: None.
- visualizeIpwDmrColor6() - Method in interface nxopen.cam.Preferences
-
Returns the ipw dmr color6
License requirements: None.
- visualizeIpwDmrColor7() - Method in interface nxopen.cam.Preferences
-
Returns the ipw dmr color7
License requirements: None.
- visualizeIpwDmrColor8() - Method in interface nxopen.cam.Preferences
-
Returns the ipw dmr color8
License requirements: None.
- visualizeIpwDmrColor9() - Method in interface nxopen.cam.Preferences
-
Returns the ipw dmr color9
License requirements: None.
- visualizeIpwDmrColoringMode() - Method in interface nxopen.cam.Preferences
-
Returns the ipw dmr coloring mode
License requirements: None.
- visualizeIpwTranslucency() - Method in interface nxopen.cam.Preferences
-
Returns the ipw translucency
License requirements: None.
- visualizeSafeToolColor() - Method in interface nxopen.cam.Preferences
-
Returns the safe tool color
License requirements: None.
- visualizeTemporaryContainmentCurveColor() - Method in interface nxopen.cam.Preferences
-
Returns the temporary containment curve color
License requirements: None.
- visualizeToolAxisTiltTolerance() - Method in interface nxopen.cam.Preferences
-
- visualizeToolDisplayColor() - Method in interface nxopen.cam.Preferences
-
Returns the tool display color
License requirements: None.
- visualizeToolEditAndDisplay() - Method in interface nxopen.cam.Preferences
-
Returns the tool edit and display
License requirements: None.
- visualizeToolHolderColor() - Method in interface nxopen.cam.Preferences
-
Returns the tool holder color
License requirements: None.
- visualizeToolInsertOrFluteColor() - Method in interface nxopen.cam.Preferences
-
Returns the turning tool insert
License requirements: None.
- visualizeToolShankColor() - Method in interface nxopen.cam.Preferences
-
Returns the tool shank color
License requirements: None.
- visualizeToolTranslucency() - Method in interface nxopen.cam.Preferences
-
Returns the tool translucency
License requirements: None.
- visualizeZone() - Method in interface nxopen.features.vehicledesign.HeadImpactBuilder
-
Returns the visualize exclusion zone flag for this head impact study.
- VisualReportExplorer - Interface in nxopen.visualreporting
-
The Explorer of the results of a visual report.
- visualReportExplorer() - Method in interface nxopen.visualreporting.VisualReportManager
-
- VisualReportExplorer.ExploreReportOption - Class in nxopen.visualreporting
-
Represents whether Explore Report mode is on or off.
- VisualReportExplorer.ReportDownStatus - Class in nxopen.visualreporting
-
- VisualReportExplorer.ReportOnObjectsOption - Class in nxopen.visualreporting
-
When the set of objects to report upon is changed, should the
contents of the set be replaced or extended.
- visualReportManager() - Method in interface nxopen.Session
-
- VisualReportManager - Interface in nxopen.visualreporting
-
A manager for load, creation and activation of visual reports.
- visualReports() - Method in interface nxopen.visualreporting.VisualReportManager
-
Returns the nxopen.visualreporting.VisualReportCollection
belonging to this visual report manager
Created in NX7.0.0
- visualVisualization() - Method in interface nxopen.preferences.PartPreferences
-
Returns object for doing Visualization preferences settings for Visual tab applicable to displayed part .
- VKI - Static variable in class nxopen.cae.Result.Filetype
-
- vloopCurve() - Method in interface nxopen.features.RapidSurfaceBuilder
-
Returns the loop curve(V)
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- vmaxCnstrData - Variable in class nxopen.uf.UFModl.RefitFaceData
-
- vmaxConstraint() - Method in interface nxopen.features.PoleSmoothingBuilder
-
Returns the v maximum continuity constraint
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- vmaxContinuity() - Method in interface nxopen.features.IFormBuilder
-
Returns the continuity at maximum U direction
License requirements: None.
- vmaximum() - Method in interface nxopen.die.QuickBinderBuilder
-
Returns the v maximum extension distance.
- vmaximum() - Method in interface nxopen.die.QuickBinderWrapBuilder
-
Returns the maximum V value
License requirements: None.
- vminCnstrData - Variable in class nxopen.uf.UFModl.RefitFaceData
-
- vminConstraint() - Method in interface nxopen.features.PoleSmoothingBuilder
-
Returns the v minimum continuity constraint
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- vminContinuity() - Method in interface nxopen.features.IFormBuilder
-
Returns the continuity at minimum V direction
License requirements: None.
- vminimum() - Method in interface nxopen.die.QuickBinderBuilder
-
Returns the v minimum extension distance.
- vminimum() - Method in interface nxopen.die.QuickBinderWrapBuilder
-
Returns the minumum V value
License requirements: None.
- vnode - Variable in class nxopen.bodydes.OnestepUnformBuilder.MeshesData
-
- vobject() - Method in interface nxopen.motion.VectorForceBuilder
-
Returns the vobject data
License requirements: None.
- vobject() - Method in interface nxopen.motion.VectorTorqueBuilder
-
Returns the action link
License requirements: None.
- VObject - Interface in nxopen.motion
-
Represents a VObject
.
- VobjectCsysType - Class in nxopen.motion
-
Represents the CSYS type
- VOLTAGE - Static variable in class nxopen.cae.Result.Quantity
-
- VOLTAGE - Static variable in class nxopen.cae.XyFunctionMeasure
-
Voltage unit
- VOLTAGE_MV - Static variable in class nxopen.cae.XyFunctionUnit
-
Voltage unit: mV
- VOLTAGE_V - Static variable in class nxopen.cae.XyFunctionUnit
-
Voltage unit: V
- voltageConstant() - Method in interface nxopen.motion.PMDCMotorBuilder
-
- voltageConstantExpression() - Method in interface nxopen.motion.PMDCMotorBuilder
-
Returns the Voltage Constant Expression
License requirements: nx_motion_motor ("NX Motion Motor")
.
- VOLUME - Static variable in class nxopen.cae.modelcheck.TestValueTypes.TestType
-
- VOLUME - Static variable in class nxopen.cae.optimization.Response
-
- VOLUME - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
-
Volume of element
- VOLUME - Static variable in class nxopen.cae.Post.Target
-
- VOLUME - Static variable in class nxopen.cae.PostGraphBuilder.FaceIntegralOption
-
- VOLUME - Static variable in class nxopen.cae.ResultProbeBuilder.FaceIntegral
-
- volume() - Method in interface nxopen.facet.FacetedBody
-
Returns
the volume of the faceted body in part units for its
highest level of detail.
- VOLUME - Static variable in class nxopen.features.shipdesign.MaterialEstimationBuilder.SelectionMethods
-
Selection by volume.
- VOLUME - Static variable in class nxopen.features.shipdesign.WeightAndCGBuilder.SelectionMethods
-
Selection by volume.
- VOLUME - Static variable in class nxopen.MeasureBodies.ActiveValue
-
- volume() - Method in interface nxopen.MeasureBodies
-
Returns the value for volume of the measurement
License requirements: None.
- volume() - Method in interface nxopen.pdm.PersistentSettings
-
Returns the Teamcenter volume to which the user used by default.
- volume() - Method in interface nxopen.pdm.SessionSettings
-
Returns the Teamcenter role in which the user acts.
- VOLUME - Static variable in class nxopen.Scalar.DimensionalityType
-
- volume - Variable in class nxopen.uf.UFWeight.Properties
-
- VOLUME_FILL - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
-
Volume of element
- VOLUME_FLOW - Static variable in class nxopen.cae.Result.Quantity
-
- VolumeBased25DMillingOperation - Interface in nxopen.cam
-
- VolumeBased25DMillingOperationBuilder - Interface in nxopen.cam
-
- volumeBody() - Method in interface nxopen.features.shipdesign.MaterialEstimationBuilder
-
Returns the selected volume body.
- volumeBody() - Method in interface nxopen.features.shipdesign.WeightAndCGBuilder
-
Returns the selected volume body.
- volumeDefinitionOption() - Method in interface nxopen.cae.optimization.TBSTopologyControllerOptimizationParameters
-
Returns the volume definition option
License requirements: None.
- volumeError - Variable in class nxopen.uf.UFWeight.Properties
-
- volumeFlowRateExp() - Method in interface nxopen.routing.DuctSizeCalculatorBuilder
-
Returns the volume flow rate associated with the duct.
- VOLUMES - Static variable in class nxopen.Catiav4Creator.SolidBodyOutputOption
-
output NX solid bodies as Volumes in CATIA
- volumeState - Variable in class nxopen.uf.UFWeight.Properties
-
- volumeThreshold() - Method in interface nxopen.cam.MinCutVolume
-
Returns the minimum volume percentage
License requirements: None.
- VON_MISES - Static variable in class nxopen.cae.DurabilityEventStrengthSettingsBuilder.StressTypeEnum
-
Von Mises
- VON_MISES - Static variable in class nxopen.cae.responsesimulation.StrengthStressCriteria
-
- VON_MISES - Static variable in class nxopen.cae.Result.Component
-
- VON_MISES - Static variable in class nxopen.uf.UFSf.DursolStressType
-
- VON_MISES_STRAIN - Static variable in class nxopen.cae.Result.Quantity
-
- VON_MISES_STRAIN_LEVEL_CROSSING_RATE - Static variable in class nxopen.cae.Result.Quantity
-
- VON_MISES_STRESS - Static variable in class nxopen.cae.Result.Quantity
-
- VON_MISES_STRESS_LEVEL_CROSSING_RATE - Static variable in class nxopen.cae.Result.Quantity
-
- VON_MISES_ULTIMATE - Static variable in class nxopen.cae.LaminatePly.PlyFailureTheoryType
-
Von Mises Utlimate failure criteria
- VON_MISES_YIELD - Static variable in class nxopen.cae.LaminatePly.PlyFailureTheoryType
-
Von Mises Yield failure criteria
- VONMISES - Static variable in class nxopen.cae.responsesimulation.DirectionDataComponent
-
- vonMisesStress() - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder
-
Returns the vonMisesStress.
- VORTICITY - Static variable in class nxopen.cae.Result.Quantity
-
- vParamater - Variable in class nxopen.geometricanalysis.GeometricProperties.Face
-
V parameter
- vparameter() - Method in interface nxopen.cae.MeshPointOnFaceBuilder
-
Returns the v parameter
License requirements: None.
- vParameter - Variable in class nxopen.geometricanalysis.GeometricProperties.CaeFace
-
v parameter of the closest point in Root Part Coordinates
- vparameter1() - Method in interface nxopen.weld.FilletBuilder
-
- vparameter1() - Method in interface nxopen.weld.WeldGrooveBuilder
-
Returns the v parameter for first face
License requirements: ugweld ("UG WELD")
.
- vparameter2() - Method in interface nxopen.weld.FilletBuilder
-
- vparameter2() - Method in interface nxopen.weld.WeldGrooveBuilder
-
Returns the v parameter for second face
License requirements: ugweld ("UG WELD")
.
- vpatches() - Method in interface nxopen.features.RapidSurfaceBuilder
-
Returns the patches(V)
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- vpatches() - Method in interface nxopen.geometricutilities.DegreesAndSegmentsOrPatchesBuilder
-
Returns the v patches
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- vPatchIntData - Variable in class nxopen.uf.UFModl.RefitFaceData
-
- vpercentage() - Method in interface nxopen.features.PointSetFacePercentageBuilder
-
Returns the v percentage expression.
- vpercentage() - Method in interface nxopen.geometricutilities.BridgeCurveConnectivity
-
Returns the V coordinate percentage indicating location on the face where bridge curve is connected
License requirements: None.
- vpercentEnd() - Method in interface nxopen.features.BridgeCurveBuilder
-
- vpercentStart() - Method in interface nxopen.features.BridgeCurveBuilder
-
- vPeriod - Variable in class nxopen.uf.UFModeling.AskFacePeriodicityData
-
- vrbTolerance - Variable in class nxopen.uf.UFModl.EdgeBlendData
-
- vrbTolerance - Variable in class nxopen.uf.UFModl.EdgeBlendMultData
-
- VRML - Static variable in class nxopen.cae.Post.Export
-
- VRMLImporter - Interface in nxopen
-
Used to import a VRML file into the work part.
- VRMLImporter.AngularToleranceType - Class in nxopen
-
Specifies the angular tolerance.
- VRMLImporter.FileUnitsType - Class in nxopen
-
Specifies the VRML file units.
- VrmlParams() - Constructor for class nxopen.uf.UFStd.VrmlParams
-
- VrmlParams(double, float, boolean, boolean, boolean, boolean, boolean, boolean) - Constructor for class nxopen.uf.UFStd.VrmlParams
-
- VSHAPED - Static variable in class nxopen.features.sheetmetal.BeadBuilder.CrossSectionTypeOptions
-
- VSHAPED - Static variable in class nxopen.uf.UFModl.BeadShape
-
- vstart() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns the V start parameter
License requirements: None.
- vstart() - Method in interface nxopen.geometricutilities.SurfaceRangeBuilder
-
Returns the v start
License requirements: None.
- vstartDeg() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns the V start degrees
License requirements: None.
- vstartDist() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns the V start distance
License requirements: None.
- vstartDistance() - Method in interface nxopen.geometricutilities.LocalUntrimBuilder
-
Returns the V start distance.
- vstartLimit() - Method in interface nxopen.geometricutilities.LocalUntrimBuilder
-
Returns the region limit of V start.
- vstartMode() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns the start V mode
License requirements: None.
- vstartSweep() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns the V start sweep degrees
License requirements: None.
- vStatus - Variable in class nxopen.uf.UFModeling.AskFacePeriodicityData
-
- vstatus - Variable in class nxopen.uf.UFModlFeatures.AskThruCurves1Data
-
- vstatus - Variable in class nxopen.uf.UFModlFeatures.AskThruCurvesData
-
- VSTRIP - Static variable in class nxopen.cam.InspectionPathBuilder.SequenceType
-
V strip
- vtype - Variable in class nxopen.uf.UFMotion.VectorForceTorque
-
- VX - Static variable in class nxopen.cae.responsesimulation.DirectionDataComponent
-
- VY - Static variable in class nxopen.cae.responsesimulation.DirectionDataComponent
-