- H - Static variable in class nxopen.cam.TurnToolBuilder.HolderStyles
-
H-Style
- h17 - Variable in class nxopen.HumanPosturePredictionBuilder.HandDataSaeData
-
AHP to steering wheel center height H17 expression
- half() - Method in interface nxopen.drawings.SectionLineBuilder
-
- HALF - Static variable in class nxopen.drawings.SectionLineBuilder.Types
-
Deprecated.
- HALF - Static variable in class nxopen.drawings.SectionViewBuilder.SectionLineType
-
- HALF - Static variable in class nxopen.drawings.SketchSectionLineBuilder.SectionLineTypes
-
- HALF - Static variable in class nxopen.geometricutilities.CircularFrameBuilder.Subtypes
-
Half circle
- HALF - Static variable in class nxopen.tooling.BlankLayoutBuilder.SnapSizeOption
-
the snap size is 1/2
- HALF_PICTORIAL - Static variable in class nxopen.drawings.SectionLineBuilder.Types
-
Deprecated.
- HALF_SCALE - Static variable in class nxopen.View.ScaleFactor
-
- HALF_SINE_WAVE - Static variable in class nxopen.cae.DurabilityLoadPatternBuilder.PatternTypeEnum
-
Half
- HALF_SIZE_FRACTION - Static variable in class nxopen.annotations.DimensionTextFormat
-
Specifies 1/2 size fraction format
- HALF_SIZE_FRACTION - Static variable in class nxopen.uf.UFDrf.FractionType
-
- HALF_SXLINE - Static variable in class nxopen.uf.UFDraw.SxlineType
-
- HALF_UNIT_CYCLE - Static variable in class nxopen.uf.UFSf.LvFunctionMode
-
- halfAngle() - Method in interface nxopen.features.ConeBuilder
-
Returns the half angle
License requirements: None.
- halfAngle - Variable in class nxopen.uf.UFModlFeatures.AskConeParmsData
-
- halfPictorial() - Method in interface nxopen.drawings.SectionLineBuilder
-
- HalfPictorialSectionLine - Interface in nxopen.drawings
-
Half Pictorial Section Line is used to create a pictorial view with
half of the part sectioned and the other half un-sectioned.
- HalfSectionLine - Interface in nxopen.drawings
-
Half Section Line is used to create a view with half of the part
sectioned and the other half un-sectioned.
- HalfSectionLineBuilder - Interface in nxopen.drawings
-
- HalfSxsegs() - Constructor for class nxopen.uf.UFDraw.HalfSxsegs
-
- HalfSxsegs(UFDrf.Object, UFDrf.Object, UFDrf.Object) - Constructor for class nxopen.uf.UFDraw.HalfSxsegs
-
- HAMMERING - Static variable in class nxopen.annotations.FinishMethod
-
Specifies hammering finish
- HAMMERING - Static variable in class nxopen.annotations.LineWeldDataBuilder.FinishSymbolType
-
- HAND - Static variable in class nxopen.HumanData.HandFootType
-
Indicate the hand
- HAND - Static variable in class nxopen.HumanData.SegmentScalingType
-
Indicate scaling of hand
- HAND_BREADTH - Static variable in class nxopen.HumanData.AdvancedScalingType
-
Indicate scaling of hand_breadth
- HAND_FIGURE - Static variable in class nxopen.HumanData.HandGoalType
-
Indicate the hand goal is hand figure
- HAND_LENGTH - Static variable in class nxopen.HumanData.AdvancedScalingType
-
Indicate scaling of hand_length
- HandDataSaeData() - Constructor for class nxopen.HumanPosturePredictionBuilder.HandDataSaeData
-
- HandFootCsysData() - Constructor for class nxopen.HumanPosturePredictionBuilder.HandFootCsysData
-
- handGripLength() - Method in interface nxopen.features.vehicledesign.ManikinBuilder
-
Returns the hand grip length.
- handle() - Method in interface nxopen.NXColor
-
Returns an integer identifier for this object.
- handleActiveColor() - Method in interface nxopen.preferences.PartVisualizationColorSetting
-
Returns the color of active handles.
- handleApplicationEvents(AssembliesEventTypes, String, String[], int[]) - Method in interface nxopen.assemblies.WaveQuery
-
Provides application (e.g. the graphical browser) event processing by NX.
- handleColor() - Method in interface nxopen.preferences.PartVisualizationColorSetting
-
Returns the color of handles.
- handleColor - Variable in class nxopen.uf.UFDisp.SystemParams
-
- handleComplement() - Method in interface nxopen.SketchEllipseBuilder
-
Adjust the constraints and dimensions on ellipse vertices when we want to complement the ellipse
License requirements: None.
- handleFixedSizeFlag() - Method in interface nxopen.blockstyler.AngularDimension
-
Returns the HandleFixedSizeFlag
License requirements: None.
- handLength() - Method in interface nxopen.features.vehicledesign.ManikinBuilder
-
Returns the hand length.
- handleOrientation() - Method in interface nxopen.blockstyler.LinearDimension
-
Returns the HandleOrientation
License requirements: None.
- handleOrientation() - Method in interface nxopen.blockstyler.RadiusDimension
-
Returns the HandleOrientation
License requirements: None.
- handleOrientxpressColor() - Method in interface nxopen.preferences.PartVisualizationColorSetting
-
Returns the color of the OrientXpress handle.
- handleOrigin() - Method in interface nxopen.blockstyler.AngularDimension
-
Returns the HandleOrigin
License requirements: None.
- handleOrigin() - Method in interface nxopen.blockstyler.LinearDimension
-
Returns the HandleOrigin
License requirements: None.
- handleOrigin() - Method in interface nxopen.blockstyler.RadiusDimension
-
Returns the HandleOrigin
License requirements: None.
- handlePoint() - Method in interface nxopen.geometricutilities.BlendSetbackBuilder
-
Returns the handle point for u/v direction.
- handlePreselectionColor() - Method in interface nxopen.preferences.PartVisualizationColorSetting
-
Returns the preselection color of handles.
- handleRadius() - Method in interface nxopen.blockstyler.AngularDimension
-
Returns the HandleRadius
License requirements: None.
- handleRadiusOffset() - Method in interface nxopen.blockstyler.AngularDimension
-
Returns the HandleRadiusOffset
License requirements: None.
- handlesColor() - Method in interface nxopen.preferences.SessionVisualizationColorSetting
-
- handleSelectionColor() - Method in interface nxopen.preferences.PartVisualizationColorSetting
-
Returns the selection color of handles.
- handleSize() - Method in interface nxopen.preferences.VisualizationHandles
-
Returns the default handle size
License requirements: None.
- handleXAxis() - Method in interface nxopen.blockstyler.AngularDimension
-
Returns the HandleXAxis
License requirements: None.
- handleZAxis() - Method in interface nxopen.blockstyler.AngularDimension
-
Returns the HandleZAxis
License requirements: None.
- handlingBodies() - Method in interface nxopen.drawings.ViewWorkflowBuilder
-
- handlingBodiesTypes() - Method in interface nxopen.drawings.ViewWorkflowBuilder
-
Returns the handling bodies provides option for update view without lightweight data
License requirements: None.
- HandlingCore - Interface in nxopen.die
-
Represents a die design handling core feature.
- HandlingCoreBuilder - Interface in nxopen.die
-
Represents a builder that is used to create or edit a
HandlingCore
feature.
- HandlingCoreBuilder.Types - Class in nxopen.die
-
Identifies how the handling Core is located in space.
- HandlingCoreChildBuilder - Interface in nxopen.die
-
Represents a Die Handling Core Child sub feature.
- handlingCoreParent() - Method in interface nxopen.die.DrawDiePunchBuilder
-
Returns the handling core parent builder of the draw die punch.
- HandlingCoreParentBuilder - Interface in nxopen.die
-
Represents a Die Handling Core Parent sub feature.
- handlingHoleParent() - Method in interface nxopen.die.RotorBuilder
-
Returns the handling holes parent builder of the rotor.
- HandrailBuilder - Interface in nxopen.routing
-
- HandrailBuilder.PostTypes - Class in nxopen.routing
-
The post type: Start, Intermediate, None, End.
- handshapeName() - Method in interface nxopen.HumanHandShapeData
-
Returns the name of the hand shape in the list
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- handshapeValue() - Method in interface nxopen.HumanHandShapeData
-
Returns the value for applying the hand shape
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- handType() - Method in interface nxopen.HumanHandShapeData
-
Returns the hand type
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- hanger() - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder
-
Returns the hanger
License requirements: None.
- hangerNumber() - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder
-
Returns the hanger number
License requirements: None.
- HANGUL - Static variable in class nxopen.features.TextBuilder.ScriptOptions
-
Specifies the Hangul Korean character set
- HARD - Static variable in class nxopen.assemblies.ClearanceSet.InterferenceType
-
- HARD_EDGED - Static variable in class nxopen.display.ImageBasedLighting.ShadowsType
-
Hard-edged, precise shadows will be generated using a ray-tracing
algorithm.
- HARD_EDGED - Static variable in class nxopen.display.LightBuilder.ShadowType
-
Hard-edged, precise shadows will be generated using a ray-tracing
algorithm.
- hardness - Variable in class nxopen.cam.CAMSetup.PartMaterialData
-
- hardness - Variable in class nxopen.cam.FeatureGeomBuilder.MaterialData
-
- HARDWARE - Static variable in class nxopen.preferences.PartVisualizationLine.LineFontDisplayType
-
- harmDisp - Variable in class nxopen.uf.UFMotion.JointMotionInput
-
- HARMONIC - Static variable in class nxopen.motion.DriverOperation.Type
-
Harmonic
- HARMONIC_INPUT - Static variable in class nxopen.uf.UFMotion.JointMotionInputType
-
- harmonicDisplacement() - Method in interface nxopen.motion.DriverOperation
-
- harmonicDisplacementExpression() - Method in interface nxopen.motion.DriverOperation
-
Returns the harmonic displacement expression
License requirements: None.
- HARNESS - Static variable in class nxopen.formboard.UpdateDiscrepancy.ObjectType
-
Harness.
- harness - Variable in class nxopen.uf.UFRoute.AskStockHarnessData
-
- harness - Variable in class nxopen.uf.UFRoute.AskWireHarnessData
-
- HarnessDefinition - Interface in nxopen.routing.electrical
-
- HarnessDevice - Interface in nxopen.routing.electrical
-
The Electrical HarnessDevice corresponds to a harness instance of the
Routing.SingleDevice
.
- HarnessDeviceCollection - Interface in nxopen.routing.electrical
-
Represents a collection of Routing.Electrical.HarnessDevice
objects.
- harnessDevices() - Method in interface nxopen.routing.RouteManager
-
HarnessDevice collection .
- harnessObject() - Method in interface nxopen.formboard.UpdateDiscrepancy
-
Returns the object in the 3D harness referenced by the discrepancy.
- HARWELL - Static variable in class nxopen.motion.LmsSolverProperty.DynamicAccelerationMethods
-
- has911Attribute(CAMObject.Attr) - Method in interface nxopen.cam.CAMObject
-
Check if a 911 attribute exists in an object.
- HAS_ASSERTION - Static variable in class nxopen.uf.UFWeight.ExceptionReason
-
- hasAbsoluteColorPlot() - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder
-
Returns a value indicating whether to plot using absolute value
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- hasActiveValues() - Method in interface nxopen.weld.CharacteristicsBuilder
-
Returns true if the characteristics builder has any active values.
- hasAdditionalValuesLabel() - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder
-
Returns a value indicating whether to add additional values label
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- hasAllReferencingStockComponentsLoaded(TaggedObject) - Method in interface nxopen.routing.RouteManager
-
Checks whether all the stock components referenced by the given Routing object are loaded or not.
- hasAssociativeOrigin(Tag) - Method in interface nxopen.uf.UFDrf
-
- hasAttachment() - Method in interface nxopen.mechatronics.ProxyOverrideObjectBuilder
-
Returns the flag for whether the proxy override object has an attachment
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- hasAttribute - Variable in class nxopen.uf.UFAttr.GetBoolUserAttributeData
-
- hasAttribute - Variable in class nxopen.uf.UFAttr.GetComputationalTimeUserAttributeData
-
- hasAttribute - Variable in class nxopen.uf.UFAttr.GetIntegerUserAttributeData
-
- hasAttribute - Variable in class nxopen.uf.UFAttr.GetRealUserAttributeData
-
- hasAttribute - Variable in class nxopen.uf.UFAttr.GetReferenceStringOfUserAttributeData
-
- hasAttribute - Variable in class nxopen.uf.UFAttr.GetStringTimeUserAttributeData
-
- hasAttribute - Variable in class nxopen.uf.UFAttr.GetStringUserAttributeData
-
- hasAvoidanceType - Variable in class nxopen.uf.UFCamgeom.AppData
-
- hasBecomeDumb(Tag) - Method in interface nxopen.uf.UFSo
-
- hasBlankDistance - Variable in class nxopen.uf.UFCambnd.AppData
-
- hasCriteriaValue() - Method in interface nxopen.cae.modelcheck.ITestValue
-
Tells whether there is criteria value associated with this test
License requirements: None.
- hasCrossCurveDeviationLabel() - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder
-
Returns a value indicating whether to display cross_curve deviation label
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- hasCustomScratchDirectory() - Method in interface nxopen.cae.optimization.TBSOutputControlOptions
-
Returns whether to use a custom cratch directory or not when solving
License requirements: None.
- hasCutStock - Variable in class nxopen.uf.UFCamgeom.AppData
-
- hasDepthTolerance(Tag) - Method in interface nxopen.uf.UFGdt
-
- hasDirectedDimension(Tag) - Method in interface nxopen.uf.UFGdt
-
- hasDrawingSheetColors(Tag) - Method in interface nxopen.uf.UFPlot
-
- hasDrawingSheetWidths(Tag) - Method in interface nxopen.uf.UFPlot
-
- hasEntryWithName(String) - Method in interface nxopen.menubar.ContextMenu
-
Indicates whether or not this menu contains a
MenuBar.ContextMenuEntry
which
has the given name.
- hasFeedrate - Variable in class nxopen.uf.UFCambnd.AppData
-
- hasFeedrate - Variable in class nxopen.uf.UFCamgeom.AppData
-
- hasFitDirection() - Method in interface nxopen.features.RefitFaceBuilder
-
Returns a flag that shows refit face direction in use
License requirements: None.
- hasGeometricDefinition(Tag) - Method in interface nxopen.uf.UFGdt
-
- hashCode() - Method in class nxopen.Enum
-
Returns a hash code for this enum
- hashCode() - Method in class nxopen.Tag
-
Returns a hash code for this Tag
- hasHelpParameter1 - Variable in class nxopen.ISketchHelpedConstraint.HelpData
-
Whether the constraint's first associated geometric item has an associated help parameter
- hasHelpParameter2 - Variable in class nxopen.ISketchHelpedConstraint.HelpData
-
Whether the constraint's second associated geometric item has an associated help parameter
- hasHelpPoint1 - Variable in class nxopen.ISketchHelpedConstraint.HelpData
-
Whether the constraint's first associated geometric item has an associated help point
- hasHelpPoint2 - Variable in class nxopen.ISketchHelpedConstraint.HelpData
-
Whether the constraint's second associated geometric item has an associated help point
- hasHingeVector() - Method in interface nxopen.geometricutilities.StyledSweepReferenceMethodBuilder
-
Returns a value indicating whether there is a hinge vector
License requirements: None.
- hasHorizontalRails() - Method in interface nxopen.routing.HandrailBuilder
-
Returns an option to create horizontal rail stock
License requirements: routing_platform ("Routing Platform")
.
- hasInfoLabel() - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder
-
Returns a value indicating whether to enable floating info label
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- hasInitialValue() - Method in interface nxopen.cae.ModelUpdateDesignVariablesRapidCreateBuilder
-
Returns the has initial value
License requirements: None.
- hasInnerToleranceLabel() - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder
-
Returns a value indicating whether to display inner tolerance label
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- hasInstanceUserAttribute(String, NXObject.AttributeType, int) - Method in interface nxopen.assemblies.Component
-
Determines if and attribute with the given Title, Type and array Index is present on the object
If the attribute is not an array, the Index is ignored (if this is known beforehand, we recommend setting the Index to -1 to save time).
- hasIntermediateComponents() - Method in interface nxopen.routing.electrical.ElectricalStockDevice
-
Does this stock device have intermediate components?
- hasLeaderPositionParameter() - Method in interface nxopen.annotations.Gdt
-
Returns a flag indicating whether this GDT has a leader position parameter.
- hasLightWeightAnalytics() - Method in interface nxopen.facet.FacetedBody
-
Returns whether the FACET has analytical information
License requirements: None.
- hasLimitsAndFitsTolerance(Tag) - Method in interface nxopen.uf.UFGdt
-
- hasLinearTransition() - Method in interface nxopen.geometricutilities.CurveShapingBuilder
-
Returns the value indicating if transition type is linear
License requirements: None.
- hasLowerBound() - Method in interface nxopen.cae.ModelUpdateDesignVariablesRapidCreateBuilder
-
Returns the has lower bound
License requirements: None.
- hasMaximumValueLabel() - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder
-
Returns a value indicating whether to display maximum value label
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- hasMaxNeedleLength() - Method in interface nxopen.geometricutilities.CombOptionsBuilder
-
Returns the maximum needle flag
License requirements: None.
- hasMinimumValueLabel() - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder
-
Returns a value indicating whether to display minimum value label
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- hasNext() - Method in class nxopen.TaggedObjectCollection.Iterator
-
Returns true if the collection has more elements
- hasOffset - Variable in class nxopen.uf.UFCamgeom.AppData
-
- hasOriginGwif() - Method in interface nxopen.blockstyler.SpecifyOrientation
-
Returns the HasOriginGwif
License requirements: None.
- hasParentlibrarymaterial() - Method in interface nxopen.PhysicalMaterial
-
Returns whether the material was copied from a library material
License requirements: None.
- hasParentmaterial() - Method in interface nxopen.PhysicalMaterial
-
Returns whether the material was copied from another material
License requirements: None.
- hasPlaneConstraint() - Method in interface nxopen.features.PolylineBuilder
-
Returns the flag indicating if polyline has plane constraint
License requirements: None.
- hasPlaneConstraint() - Method in interface nxopen.features.StudioSplineBuilderEx
-
Returns the flag indicating if spline has plane constraint
License requirements: None.
- hasProportionalUpdate() - Method in interface nxopen.features.StudioSplineBuilderEx
-
Returns the flag indicating if free or non attached defining points or poles should be
moved proportionally during update of the spline feature
License requirements: None.
- hasRadius() - Method in interface nxopen.features.FitCurveBuilder
-
Returns the has radius
License requirements: None.
- hasReuseTemplate() - Method in interface nxopen.Part
-
Returns the indicator that the part contains a reuse template.
- hasReversedDirection() - Method in interface nxopen.features.FitCurveBuilder
-
Returns the flag indicating if fitted curve direction should be reversed
License requirements: None.
- hasSameConvexity - Variable in class nxopen.EdgeMultipleSeedTangentRule.Data
-
True: will only find tangnet edges
that has the same convexity
- hasSameConvexity - Variable in class nxopen.EdgeTangentRule.Data
-
True: will only find tangnet edges that has the same convexity
- hasSameConvexity - Variable in class nxopen.EdgeVertexTangentRule.Data
-
True: will only find tangent edges that
has the same convexity
- hasSameConvexity - Variable in class nxopen.FaceTangentRule.Data
-
True: will only find tangnet faces that has the same convexity
- hasSelected() - Method in interface nxopen.uistyler.SingleSelectList
-
Returns whether or not an item has been selected
License requirements: None.
- hasSelectedFeaList() - Method in interface nxopen.uf.UFMfm
-
- hasSelfIpw(Tag) - Method in interface nxopen.uf.UFOper
-
- hasSizeTolerance(Tag) - Method in interface nxopen.uf.UFGdt
-
- hasStatus(SpreadsheetDataParameter.Status) - Method in interface nxopen.tooling.SpreadsheetDataParameter
-
Check if the parameter has the given status
License requirements: None.
- hasStock - Variable in class nxopen.uf.UFCambnd.AppData
-
- hasStock - Variable in class nxopen.uf.UFCamgeom.AppData
-
- hasStubbedDatumStyle() - Method in interface nxopen.annotations.Gdt
-
Returns a flag indicating whether the leader has a stubbed datum style.
- hasSuppressedGeom(CAMObject) - Method in interface nxopen.cam.CAMSetup
-
Check for suppressed geometry
License requirements: cam_base ("CAM BASE")
.
- hasSymmetricModelingConstraint() - Method in interface nxopen.features.GeometricConstraintData
-
Returns the flag indicating if tangent direction is used for creating symmetric modeling
constraint.
- hasTestValue - Variable in class nxopen.cae.modelcheck.ElementQualityCheckResults.TestSummary
-
indicates whether the test has a test value.
- hasTestValue() - Method in interface nxopen.cae.modelcheck.TestResult
-
Tells whether there is a test value associated with this test
License requirements: None.
- hasTolerances - Variable in class nxopen.uf.UFCambnd.AppData
-
- hasTolerances - Variable in class nxopen.uf.UFCamgeom.AppData
-
- hasToolPosition - Variable in class nxopen.uf.UFCambnd.AppData
-
- hasTopologyInformation() - Method in interface nxopen.facet.FacetedBody
-
Returns whether the FACET has topology information
License requirements: None.
- hasTransform - Variable in class nxopen.DisplayManager.J3dData
-
true if an assembly transform is used
- hasTransform - Variable in class nxopen.uf.UFDisp.J3dEntity
-
- hasUniformSegments() - Method in interface nxopen.features.FitCurveBuilder
-
Returns the flag indicating if uniform segments should be created
License requirements: None.
- hasUnitsMenu() - Method in interface nxopen.blockstyler.ExpressionBlock
-
Returns the HasUnitsMenu.
- hasUpperBound() - Method in interface nxopen.cae.ModelUpdateDesignVariablesRapidCreateBuilder
-
Returns the has upper bound
License requirements: None.
- hasUserAttribute(String, NXObject.AttributeType, int) - Method in interface nxopen.NXObject
-
Determines if an attribute with the given Title, Type and array Index is present on the object
Unset attributes will not be detected by this function, as its purpose is to test for the actual presence of the attribute on the object.
- hasUserAttributeWithTitleAndType(Tag, String, int, int) - Method in interface nxopen.uf.UFAttr
-
- hasUserSpecifiedValue() - Method in interface nxopen.visualreporting.Condition
-
Returns whether this
Condition
requires user input.
- hasWallThickness(Tag) - Method in interface nxopen.uf.UFGdt
-
- Hatch - Interface in nxopen.annotations
-
Represents a crosshatch or area fill
To create or edit an instance of this class, use
HatchBuilder
Created in NX6.0.0
- HATCH_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- HATCH_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- hatchAngle() - Method in interface nxopen.annotations.HatchStyleBuilder
-
Returns the angle of the crosshatching lines
License requirements: None.
- hatchAngle() - Method in interface nxopen.features.MasterCutBuilder
-
Returns the hatch angle
License requirements: solid_modeling ("SOLIDS MODELING")
.
- hatchAngle - Variable in class nxopen.uf.UFDrf.HatchFillPreferences
-
- HatchBuilder - Interface in nxopen.annotations
-
This class is used to construct the crosshatching that lies within a boundary.
- HatchBuilder.AnnotationTypes - Class in nxopen.annotations
-
- HatchCollection - Interface in nxopen.annotations
-
Represents a collection of
Hatch
objects
To obtain an instance of this class, refer to
AnnotationManager
Created in NX6.0.0
- hatchCurve - Variable in class nxopen.uf.UFDraw.BreakRegionBoundary
-
- hatchDistance() - Method in interface nxopen.annotations.HatchStyleBuilder
-
Returns the distance between crosshatch lines
License requirements: None.
- hatchDistance() - Method in interface nxopen.features.MasterCutBuilder
-
Returns the hatch distance
License requirements: solid_modeling ("SOLIDS MODELING")
.
- hatchDistance - Variable in class nxopen.uf.UFDrf.HatchFillPreferences
-
- hatches() - Method in interface nxopen.annotations.AnnotationManager
-
Hatch collection .
- hatchFile() - Method in interface nxopen.annotations.HatchStyleBuilder
-
Returns the crosshatch definition file
License requirements: None.
- hatchFile - Variable in class nxopen.uf.UFDrf.HatchFillPreferences
-
- HatchFillPreferences() - Constructor for class nxopen.uf.UFDrf.HatchFillPreferences
-
- HatchFillPreferences(double, double, double, String, String, UFDrf.AreaFillMaterial, double, double, int, UFDrf.LineWidth) - Constructor for class nxopen.uf.UFDrf.HatchFillPreferences
-
- hatchFillSettings() - Method in interface nxopen.annotations.HatchBuilder
-
Returns the HatchFillSetting
License requirements: None.
- HatchFillSettingsBuilder - Interface in nxopen.annotations
-
This class is used to construct the Crosshatch and area Fill setting block .
- HatchFillSettingsBuilder.AnnotationTypes - Class in nxopen.annotations
-
the valid types of hatch objects
- hatchMaterial() - Method in interface nxopen.annotations.HatchStyleBuilder
-
Returns the crosshatch material
License requirements: None.
- hatchMaterial - Variable in class nxopen.uf.UFDrf.HatchFillPreferences
-
- hatchStyle() - Method in interface nxopen.annotations.StyleBuilder
-
Returns the hatch style builder
License requirements: None.
- HatchStyleBuilder - Interface in nxopen.annotations
-
- hatchTag - Variable in class nxopen.uf.UFDraw.ViewBoundary
-
- hatchTolerance - Variable in class nxopen.uf.UFDrf.HatchFillPreferences
-
- HBDY - Static variable in class nxopen.uf.UFSf.ElementType
-
- HDF5DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- HDF5FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- HEAD - Static variable in class nxopen.HumanData.InverseKinematicsBodyParts
-
Indicate inverse kinematics body parts named head
- HEAD - Static variable in class nxopen.HumanData.SegmentScalingType
-
Indicate scaling of head
- HEAD - Static variable in class nxopen.sim.KinematicComponentBuilder.SystemClass
-
Head class
- head() - Method in interface nxopen.tooling.ElectrodeDeleteBuilder
-
Returns the utility to get sparking solid to delete.
- head() - Method in interface nxopen.tooling.EWMultiPositionBuilder
-
Returns the head to match to another possible head.
- HEAD_AND_LEG_IMPACT - Static variable in class nxopen.features.vehicledesign.PedestrianProtectionBuilder.Types
-
Head and leg impact study.
- HEAD_BREADTH - Static variable in class nxopen.HumanData.AdvancedScalingType
-
Indicate scaling of head_breadth
- HEAD_HEIGHT - Static variable in class nxopen.HumanData.AdvancedScalingType
-
Indicate scaling of head_height
- HEAD_IMPACT - Static variable in class nxopen.features.vehicledesign.PedestrianProtectionBuilder.Types
-
Head impact study only.
- HEAD_LENGTH - Static variable in class nxopen.HumanData.AdvancedScalingType
-
Indicate scaling of head_length
- headBodies() - Method in interface nxopen.tooling.ElectrodeBlankBuilder
-
Returns the head bodies to be used to create a blank.
- headControl - Variable in class nxopen.uf.UFDraw.ArrowParms
-
- headDesignation() - Method in interface nxopen.cam.ToolChangeCiBuilder
-
Returns the head designation Type
License requirements: None.
- headDiameter() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the diameter of the headform.
- headDiameterMarginal() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the marginal diameter of the headform.
- headEdge() - Method in interface nxopen.cae.BoltBuilder
-
Returns the selected head edge(s)
License requirements: None.
- header - Variable in class nxopen.uf.UFSfLegend.Attr
-
- HEADER_LOCATION_ABOVE - Static variable in class nxopen.uf.UFTabnot.HeaderLocation
-
- HEADER_LOCATION_BELOW - Static variable in class nxopen.uf.UFTabnot.HeaderLocation
-
- HEADER_LOCATION_NONE - Static variable in class nxopen.uf.UFTabnot.HeaderLocation
-
- HEADER_ONLY - Static variable in class nxopen.cae.Post.Legend
-
- Headerlines() - Constructor for class nxopen.cae.Post.Headerlines
-
- Headerlines(boolean, String) - Constructor for class nxopen.cae.Post.Headerlines
-
Constructor for the Headerlines object.
- headerLocation() - Method in interface nxopen.annotations.TableSectionStyleBuilder
-
Returns the value that represents the location of header on a section
License requirements: None.
- headerLocation - Variable in class nxopen.uf.UFTabnot.SectionPrefs
-
- headEyeType() - Method in interface nxopen.features.HumanBuilder
-
Returns the head eye type of active reach
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- HeadImpact - Interface in nxopen.features.vehicledesign
-
Represents a head impact feature.
- HeadImpactAPillar - Interface in nxopen.features.vehicledesign
-
Represents a head impact a-pillar feature.
- HeadImpactAPillarBuilder - Interface in nxopen.features.vehicledesign
-
- HeadImpactAPillarDetailBuilder - Interface in nxopen.features.vehicledesign
-
- HeadImpactAPillarDetailBuilder.MeasurementMethodType - Class in nxopen.features.vehicledesign
-
Represents the measurement methods used to position point 1.
- HeadImpactAPillarWizardBuilder - Interface in nxopen.features.vehicledesign
-
- HeadImpactBPillar - Interface in nxopen.features.vehicledesign
-
Represents a head impact b-pillar feature.
- HeadImpactBPillarBuilder - Interface in nxopen.features.vehicledesign
-
- HeadImpactBPillarDetailBuilder - Interface in nxopen.features.vehicledesign
-
- HeadImpactBPillarWizardBuilder - Interface in nxopen.features.vehicledesign
-
- HeadImpactBuilder - Interface in nxopen.features.vehicledesign
-
- HeadImpactBuilder.CalculationType - Class in nxopen.features.vehicledesign
-
Represents the calculation types.
- HeadImpactBuilder.RequirementsControlType - Class in nxopen.features.vehicledesign
-
Represents the requirements control types.
- HeadImpactFrontHeader - Interface in nxopen.features.vehicledesign
-
Represents a head impact front header feature.
- HeadImpactFrontHeaderBuilder - Interface in nxopen.features.vehicledesign
-
- HeadImpactFrontHeaderDetailBuilder - Interface in nxopen.features.vehicledesign
-
- HeadImpactFrontHeaderWizardBuilder - Interface in nxopen.features.vehicledesign
-
- HeadImpactOPillar - Interface in nxopen.features.vehicledesign
-
Represents a head impact side rail feature.
- HeadImpactOPillarBuilder - Interface in nxopen.features.vehicledesign
-
- HeadImpactOPillarDetailBuilder - Interface in nxopen.features.vehicledesign
-
- HeadImpactOPillarWizardBuilder - Interface in nxopen.features.vehicledesign
-
- HeadImpactOtherRail - Interface in nxopen.features.vehicledesign
-
Represents a head impact additional side rail feature.
- HeadImpactOtherRailBuilder - Interface in nxopen.features.vehicledesign
-
- HeadImpactOtherRailDetailBuilder - Interface in nxopen.features.vehicledesign
-
- HeadImpactOtherRailWizardBuilder - Interface in nxopen.features.vehicledesign
-
- HeadImpactRearHeader - Interface in nxopen.features.vehicledesign
-
Represents a head impact rear header feature.
- HeadImpactRearHeaderBuilder - Interface in nxopen.features.vehicledesign
-
- HeadImpactRearHeaderDetailBuilder - Interface in nxopen.features.vehicledesign
-
- HeadImpactRearHeaderWizardBuilder - Interface in nxopen.features.vehicledesign
-
- HeadImpactRPillar - Interface in nxopen.features.vehicledesign
-
Represents a head impact rear pillar feature.
- HeadImpactRPillarBuilder - Interface in nxopen.features.vehicledesign
-
- HeadImpactRPillarDetailBuilder - Interface in nxopen.features.vehicledesign
-
- HeadImpactRPillarWizardBuilder - Interface in nxopen.features.vehicledesign
-
- HeadImpactSideRail - Interface in nxopen.features.vehicledesign
-
Represents a head impact side rail feature.
- HeadImpactSideRailBuilder - Interface in nxopen.features.vehicledesign
-
- HeadImpactSideRailDetailBuilder - Interface in nxopen.features.vehicledesign
-
- HeadImpactSideRailWizardBuilder - Interface in nxopen.features.vehicledesign
-
- HeadImpactUpperRoof - Interface in nxopen.features.vehicledesign
-
Represents a head impact upper roof feature.
- HeadImpactUpperRoofBuilder - Interface in nxopen.features.vehicledesign
-
- HeadImpactUpperRoofDetailBuilder - Interface in nxopen.features.vehicledesign
-
- HeadImpactUpperRoofWizardBuilder - Interface in nxopen.features.vehicledesign
-
- headOrientation() - Method in interface nxopen.cam.LaserCircleCutout
-
Returns the Head Orientation
License requirements: None.
- headOrientation() - Method in interface nxopen.cam.LaserHexagonCutout
-
Returns the Head Orientation
License requirements: None.
- headOrientation() - Method in interface nxopen.cam.LaserLinearMove
-
Returns the Head Orientation
License requirements: None.
- headOrientation() - Method in interface nxopen.cam.LaserProfileMove
-
Returns the Head Orientation
License requirements: None.
- headOrientation() - Method in interface nxopen.cam.LaserRectangleCutout
-
Returns the Head Orientation
License requirements: None.
- headOrientation() - Method in interface nxopen.cam.LaserSlotCutout
-
Returns the Head Orientation
License requirements: None.
- headPoint() - Method in interface nxopen.cae.BoltBuilder
-
Returns the head point(s)
License requirements: None.
- headSelectionType() - Method in interface nxopen.cae.BoltBuilder
-
Returns the head selection type
License requirements: None.
- headSet() - Method in interface nxopen.tooling.EWMultiPositionBuilder
-
Returns the head sets with specified body and transformation data.
- headSpiderDiameter() - Method in interface nxopen.cae.BoltBuilder
-
Returns the diameter used for creating head spider elements
License requirements: None.
- headSpiderScale() - Method in interface nxopen.cae.BoltBuilder
-
Returns the scale used to determine the head spider diameter relative to the hole diameter
License requirements: None.
- headSpiderType() - Method in interface nxopen.cae.BoltBuilder
-
Returns the option for head spider diameter
License requirements: None.
- headSurface() - Method in interface nxopen.cae.BoltBuilder
-
Returns the selected head surface(s)
License requirements: None.
- headType - Variable in class nxopen.uf.UFDraw.ArrowParms
-
- headType - Variable in class nxopen.uf.UFPath.ToolChange
-
- HEADTYPE_FRONT - Static variable in class nxopen.uf.UFPath.HeadType
-
- HEADTYPE_LAST_ELEMENT - Static variable in class nxopen.uf.UFPath.HeadType
-
- HEADTYPE_LEFT - Static variable in class nxopen.uf.UFPath.HeadType
-
- HEADTYPE_NONE - Static variable in class nxopen.uf.UFPath.HeadType
-
- HEADTYPE_REAR - Static variable in class nxopen.uf.UFPath.HeadType
-
- HEADTYPE_RIGHT - Static variable in class nxopen.uf.UFPath.HeadType
-
- HEADTYPE_SADDLE - Static variable in class nxopen.uf.UFPath.HeadType
-
- HEADTYPE_SIDE - Static variable in class nxopen.uf.UFPath.HeadType
-
- heal() - Method in interface nxopen.features.DeleteCurveBuilder
-
Returns the heal
License requirements: None.
- heal() - Method in interface nxopen.features.DeleteFaceBuilder
-
Returns the flag specifying whether to heal the body while deleting its face.
- HEAL_PATH - Static variable in class nxopen.routing.DesignRuleViolationCollection.Reason
-
- healBodies() - Method in interface nxopen.Catiav4Importer
-
Returns the heal bodies - if set to true then imported data will be healed
License requirements: None.
- healBodies() - Method in interface nxopen.ProeImporter
-
Returns the heal bodies - if set to true then imported data will be healed
License requirements: None.
- healGeometryOnImport() - Method in interface nxopen.preferences.SessionNXGateway
-
Returns the heal geometry on import flag for I-DEAS import
License requirements: None.
- HealMethod - Class in nxopen.routing
-
Different heal path creation methods.
- healMethod - Variable in class nxopen.routing.HealPath.AllData
-
- healOption() - Method in interface nxopen.features.AdmMoveFaceBuilder
-
Returns the heal option.
- HealPath - Interface in nxopen.routing
-
Represents a
HealPath
object which holds the data used in the creation of the heal path spline.
- HealPath.AllData - Class in nxopen.routing
-
- healPlanar() - Method in interface nxopen.features.DeleteFaceBuilder
-
Returns the flag of finding a plane in which all edges of a hole lie and attach this to a face covering the hole during heal hole process,
don't use it until further notification
License requirements: None.
- HEAT_CAPACITY - Static variable in class nxopen.cae.Result.Quantity
-
- HEAT_FLOW - Static variable in class nxopen.cae.Result.Quantity
-
- HEAT_FLUX - Static variable in class nxopen.cae.Result.Quantity
-
- HEAT_RESIDUAL - Static variable in class nxopen.cae.Result.Quantity
-
- HEAVY - Static variable in class nxopen.preferences.ViewVisualizationSpecialEffects.FogType
-
Non linear Fog
- HEBREW - Static variable in class nxopen.features.TextBuilder.ScriptOptions
-
Specifies the Hebrew character set
- HEEL - Static variable in class nxopen.tooling.InsertAuxiliaryBuilder.ShankShapeTypes
-
heel
- heelHeight() - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
Returns the heel height.
- heelLength() - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
Returns the heel length.
- heelOffset() - Method in interface nxopen.features.shipdesign.CustomBracketBuilder
-
Returns the heel offset
License requirements: None.
- heelPoint() - Method in interface nxopen.features.shipdesign.CustomBracketBuilder
-
Returns the heel point
License requirements: None.
- heelpost(Heelpost) - Method in interface nxopen.die.DieCollection
-
- Heelpost - Interface in nxopen.die
-
Represents a heelpost feature
To create or edit an instance of this class, use
HeelpostBuilder
Created in NX6.0.0
- HeelpostBuilder - Interface in nxopen.die
-
- HeelpostBuilder.Types - Class in nxopen.die
-
Heelpost types
- heelRadian() - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
Returns the heel radius.
- heelReferencePoint() - Method in interface nxopen.features.vehicledesign.BaseDataDriverBuilder
-
Returns the driver heel reference point.
- heelReferencePoint() - Method in interface nxopen.features.vehicledesign.BaseDataPassengerBuilder
-
Returns the passenger's heel reference point.
- heelReferencePointActive() - Method in interface nxopen.features.vehicledesign.BaseDataDriverBuilder
-
Returns the status to indicate whether the driver heel reference point is active or not.
- heelReferencePointActive() - Method in interface nxopen.features.vehicledesign.BaseDataPassengerBuilder
-
Returns the status to indicate whether the passenger heel reference point is active or not.
- heelWidth() - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
Returns the heel width.
- height() - Method in interface nxopen.annotations.DatumTargetBuilder
-
Returns the height
License requirements: None.
- height() - Method in interface nxopen.annotations.ForeshorteningSymbolSettingsBuilder
-
Returns the foreshortening symbol height
License requirements: None.
- height() - Method in interface nxopen.annotations.RegionBuilder
-
- height() - Method in interface nxopen.annotations.TargetPointBuilder
-
Returns the height
License requirements: None.
- height() - Method in interface nxopen.annotations.TextComponent
-
Returns the text height.
- height - Variable in class nxopen.assemblies.WaveQuery.PartPreviewData
-
height of preview image
- height - Variable in class nxopen.BasePart.PreviewImageData
-
image height
- height() - Method in interface nxopen.blockstyler.DrawingArea
-
Returns the Height
License requirements: None.
- height() - Method in interface nxopen.blockstyler.ListBox
-
Returns the Height
License requirements: None.
- height() - Method in interface nxopen.blockstyler.MultilineString
-
Returns the Height
License requirements: None.
- height() - Method in interface nxopen.blockstyler.ScrolledWindow
-
Returns the Height
License requirements: None.
- height() - Method in interface nxopen.blockstyler.Tree
-
Returns the Height
License requirements: None.
- height() - Method in interface nxopen.cam.NcmHoleMachiningEngRet
-
Returns the engage/retract height builder
License requirements: None.
- height() - Method in interface nxopen.cam.ThreadedBossSet
-
Returns the Height
License requirements: None.
- height() - Method in interface nxopen.die.HandlingCoreBuilder
-
Returns the expression containing the value to use for the height of the core.
- height() - Method in interface nxopen.die.HandlingCoreChildBuilder
-
Returns the height of the handling core.
- height() - Method in interface nxopen.die.HandlingCoreParentBuilder
-
Returns the height of handling cores.
- height() - Method in interface nxopen.die.HeelpostBuilder
-
Returns the height from the selected base orientation to the origin of the pad orientation, if the pad orientation is not specified.
- height() - Method in interface nxopen.die.PadChildBuilder
-
Returns the height of the die pad.
- height() - Method in interface nxopen.die.PadParentBuilder
-
Returns the height of die pads.
- height() - Method in interface nxopen.die.PressureSystemChildBuilder
-
Returns the height of the pressure system.
- height() - Method in interface nxopen.die.PressureSystemParentBuilder
-
Returns the height of pressure systems.
- height() - Method in interface nxopen.die.RibChildBuilder
-
Returns the height of the die rib.
- height() - Method in interface nxopen.die.RibParentBuilder
-
Returns the height of die ribs.
- height() - Method in interface nxopen.display.ImageBaseBuilder
-
Returns the height of the image as an
Expression
.
- height() - Method in interface nxopen.drawings.DrawingRegionBuilder
-
Returns the height
License requirements: None.
- height() - Method in interface nxopen.features.AeroRibBuilder
-
Returns the height
License requirements: None.
- height() - Method in interface nxopen.features.ConeBuilder
-
Returns the height
License requirements: None.
- height() - Method in interface nxopen.features.CylinderBuilder
-
Returns the height
License requirements: None.
- height() - Method in interface nxopen.features.OvercrownBuilder
-
Returns the maximum height of deformation.
- height() - Method in interface nxopen.features.RasterImage
-
Returns the height of the image, given in part units (mm or in)
License requirements: None.
- height() - Method in interface nxopen.features.sheetmetal.BeadBuilder
-
Returns the height of the bead.
- height() - Method in interface nxopen.features.shipdesign.PenetrationAssociationBuilder
-
Returns the height expression
License requirements: None.
- height() - Method in interface nxopen.features.shipdesign.PenetrationCutoutBuilder
-
Returns the height expression
License requirements: None.
- height() - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder
-
Returns the height expression
License requirements: None.
- height() - Method in interface nxopen.geometricutilities.FrameOnPathBuilder
-
Returns the height
License requirements: None.
- height() - Method in interface nxopen.geometricutilities.RectangularFrameBuilder
-
Returns the height
License requirements: None.
- height() - Method in interface nxopen.routing.electrical.ElectricalStockDefinition
-
Returns the height of stock
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- height - Variable in class nxopen.routing.PathStockBuilder.RectangularDimensionsData
-
- height() - Method in interface nxopen.tooling.ShimBuilder
-
Returns the height of shim body
License requirements: None.
- height - Variable in class nxopen.uf.UFDrf.AskAnnotationTextBoxData
-
- height - Variable in class nxopen.uf.UFDrf.DraftAidTextInfo
-
- height - Variable in class nxopen.uf.UFDrf.ImageData
-
- height - Variable in class nxopen.uf.UFDrf.SymbolCreateData
-
- height - Variable in class nxopen.uf.UFDrf.SymbolData
-
- height - Variable in class nxopen.uf.UFDrf.UdSymbolFontInfo
-
- height - Variable in class nxopen.uf.UFGdt.TargetRectArea
-
- height - Variable in class nxopen.uf.UFModlFeatures.AskBossParmsData
-
- height - Variable in class nxopen.uf.UFModlFeatures.AskConeParmsData
-
- height - Variable in class nxopen.uf.UFModlFeatures.AskCylinderParmsData
-
- height - Variable in class nxopen.uf.UFModlGeneral.AskPrismParmsData
-
- height - Variable in class nxopen.uf.UFUgfont.FontHeader
-
- height() - Method in interface nxopen.weld.EasyPatternBuilder
-
Returns the height of the measurement solid to create.
- heightAboveFeature() - Method in interface nxopen.cam.InspectionPathBuilder
-
Returns the height above feature for entry and exit points
License requirements: None.
- heightBuilder() - Method in interface nxopen.cam.NcmPlanarEngRetBuilder
-
Returns the engage/retract height builder
License requirements: None.
- heightBuilder() - Method in interface nxopen.cam.NcmScEngRetBuilder
-
Returns the engage/retract height builder
License requirements: None.
- heightDefinedBy() - Method in interface nxopen.cae.MeshControlBuilder
-
Returns the height defined by option
License requirements: nx_masterfem ("Finite Element Modeling")
.
- heightDimensionType() - Method in interface nxopen.features.AeroRibBuilder
-
Returns the height dimension type
License requirements: None.
- heightDir - Variable in class nxopen.uf.UFDrf.ImageData
-
- heightFrom() - Method in interface nxopen.cam.NcmPlanarEngRetBuilder
-
Returns the height from which engage helical/ramp/plunge is measured
License requirements: None.
- heightOffset() - Method in interface nxopen.features.OffsetEmbossBuilder
-
Returns the height offset:
Distance to offset the input sheet to create the pad.
- heightOrAspectRatio - Variable in class nxopen.annotations.SimpleDraftingAid.UserSymbolSizeData
-
- heightOrAspectRatio - Variable in class nxopen.annotations.UserSymbolPreferences.SizeData
-
Height or aspect ratio
- heightOrAspectRatio - Variable in class nxopen.uf.UFDrf.UdsSize
-
- heightPercent - Variable in class nxopen.uf.UFSfLegend.IndexAttr
-
- heightScale() - Method in interface nxopen.display.DecalBuilder
-
Returns the decal height scale
License requirements: None.
- heightSide() - Method in interface nxopen.features.sheetmetal.BeadBuilder
-
Returns the Height side for the bead.
- heightStep() - Method in interface nxopen.tooling.BlankNestingBuilder
-
Returns the distance increment to use when translating the blank in the vertical direction during the processing to find the best layout.
- heightType() - Method in interface nxopen.annotations.SearchCriteriaDatumTargetBuilder
-
Returns the height enum
License requirements: None.
- heightValue() - Method in interface nxopen.annotations.SearchCriteriaDatumTargetBuilder
-
Returns the height value
License requirements: None.
- heightValue() - Method in interface nxopen.tooling.FormingInsertBuilder
-
Returns the height value of blank.
- heightZ() - Method in interface nxopen.features.vehicledesign.WheelFixingBuilder
-
Returns the expression that contains the value which indicates the height Z of the wheel fixing when the shape is block.
- heigth() - Method in interface nxopen.tooling.GeneralInsertBuilder
-
Returns the heigth
License requirements: None.
- HELICAL - Static variable in class nxopen.cam.CutPatternBuilder.Types
-
Helical
- HELICAL - Static variable in class nxopen.cam.CylinderMillingBuilder.CutPatternTypes
-
Helical
- HELICAL - Static variable in class nxopen.cam.DmSurfBuilder.DmSurfCutPatternType
-
Retract
- HELICAL - Static variable in class nxopen.cam.NcmHoleMachiningEngRet.EngRetTypes
-
Helical
- HELICAL - Static variable in class nxopen.cam.NcmPlanarEngRetBuilder.EngRetTypes
-
Helical Ramp
- HELICAL_AND_SPIRAL - Static variable in class nxopen.cam.CylinderMillingBuilder.CutPatternTypes
-
Helical/Spiral
- HELICAL_CCLW - Static variable in class nxopen.cam.NcmScEngRetBuilder.EngRetTypes
-
Helical Counter Clockwise
- HELICAL_CLW - Static variable in class nxopen.cam.NcmScEngRetBuilder.EngRetTypes
-
Helical Clockwise
- HELICAL_GEAR_TYPE - Static variable in class nxopen.uf.UFPd.AttributeType
-
- HELICAL_SCAN - Static variable in class nxopen.cam.InspectionMethodBuilder.OperationTypes
-
Scan Helix
- HELICAL_SPIRAL - Static variable in class nxopen.cam.CutPatternBuilder.Types
-
Helical or Spiral
- helicalDiameter() - Method in interface nxopen.cam.MillingToolBuilder
-
Returns the helical diameter
License requirements: None.
- HelicalMotion() - Constructor for class nxopen.uf.UFPath.HelicalMotion
-
- HelicalMotion(double[], double[], double[], double[], double[], double[], double, double, double, double, UFPath.FeedUnit, UFPath.MotionType, UFPath.Side, UFPath.Shape) - Constructor for class nxopen.uf.UFPath.HelicalMotion
-
- helicalRampAngle() - Method in interface nxopen.cam.MillingToolBuilder
-
Returns the ramp angle
License requirements: None.
- helicalRampAngle() - Method in interface nxopen.cam.NcmScEngRetBuilder
-
- helicalRampAngleBuilder() - Method in interface nxopen.cam.NcmPlanarEngRetBuilder
-
Returns the helical ramp angle builder of Helical and Ramp on Shape type of Engages
License requirements: None.
- helicalRampAngleBuilder() - Method in interface nxopen.cam.NcmScEngRetBuilder
-
Returns the helical ramp angle builder
License requirements: None.
- HELICOIL - Static variable in class nxopen.cam.DrillThreadMillToolBuilder.ToolFormTypeTypes
-
Helicoil
- HELICOIL - Static variable in class nxopen.cam.fbm.ThreadFeatureGeometry.Form
-
Form: Helicoil
- HELICOIL - Static variable in class nxopen.cam.HoleBossGeom.FormTypes
-
Form: Helicoil
- Helix - Interface in nxopen.features
-
Represents a helix feature
To create or edit an instance of this class, use
HelixBuilder
Created in NX8.5.0
- HELIX - Static variable in class nxopen.geometricutilities.PatternDefinition.PatternEnum
-
helix pattern.
- HelixBuilder - Interface in nxopen.features
-
- HelixBuilder.LengthMethods - Class in nxopen.features
-
Method for defining the length
- HelixBuilder.OrientationOptions - Class in nxopen.features
-
Orientation options for along spine type
- HelixBuilder.SizeOptions - Class in nxopen.features
-
Option indicating how size is defined
- HelixBuilder.TurnDirections - Class in nxopen.features
-
Option indicating direction of the turn
- HelixBuilder.Types - Class in nxopen.features
-
Type of helix
- helixDefinition() - Method in interface nxopen.geometricutilities.PatternDefinition
-
Returns the helix definition.
- helixDiameter() - Method in interface nxopen.cam.CylinderMillingBuilder
-
Returns the Helix Diamter
License requirements: None.
- helixOrientationOption() - Method in interface nxopen.geometricutilities.PatternOrientation
-
Returns the orientationOption for Helix pattern type
License requirements: None.
- HelixPattern - Interface in nxopen.geometricutilities
-
the Helix pattern definition.
- HelixPattern.DirectionTypes - Class in nxopen.geometricutilities
-
This defines helix direction method
- HelixPattern.SizeOptions - Class in nxopen.geometricutilities
-
defines Helix size options for Helix type pattern.
- helixPitch() - Method in interface nxopen.geometricutilities.HelixPattern
-
Returns the helix pitch expression for the Helix type pattern
License requirements: None.
- helixSpan() - Method in interface nxopen.geometricutilities.HelixPattern
-
Returns the helix span expression for the Helix type pattern
License requirements: None.
- HELP - Static variable in class nxopen.Selection.DialogResponse
-
User selected Help
- help() - Method in interface nxopen.tooling.StandardPartBuilder
-
Ask help of the selected standard part component.
- help() - Method in interface nxopen.UFSession
-
- HELP - Static variable in class nxopen.uistyler.DialogResponse
-
Help button was selected.
- HELP_DATA_NONE - Static variable in class nxopen.uf.UFCurve.HelpDataType
-
- HELP_DATA_PARAMETER - Static variable in class nxopen.uf.UFCurve.HelpDataType
-
- HELP_DATA_VALUE - Static variable in class nxopen.uf.UFCurve.HelpDataType
-
- HelpData() - Constructor for class nxopen.ISketchHelpedConstraint.HelpData
-
- helpData - Variable in class nxopen.uf.UFCurve.Constraint
-
- HelpData() - Constructor for class nxopen.uf.UFCurve.HelpData
-
- HelpData(UFCurve.HelpDataType, double[], double) - Constructor for class nxopen.uf.UFCurve.HelpData
-
- helpData - Variable in class nxopen.uf.UFCurve.Limit
-
- helpDataType - Variable in class nxopen.uf.UFCurve.HelpData
-
- helpParameter - Variable in class nxopen.uf.UFSket.ConGeom
-
- helpParameter1 - Variable in class nxopen.ISketchHelpedConstraint.HelpData
-
The first help parameter.
- helpParameter2 - Variable in class nxopen.ISketchHelpedConstraint.HelpData
-
The second help parameter.
- helpPoint() - Method in interface nxopen.features.FaceBlendBuilder
-
Returns the face blend help point
License requirements: None.
- helpPoint() - Method in interface nxopen.features.SphericalCornerBuilder
-
Returns the Help point acquired from the first face set selection
License requirements: None.
- helpPoint() - Method in interface nxopen.positioning.ConstraintReference
-
Returns
the help point of the constraint reference.
- helpPoint - Variable in class nxopen.Sketch.DimensionGeometry
-
help point
- helpPoint() - Method in interface nxopen.SketchChamferBuilder
-
Returns the coordinates of the help point for Chamfer creation
License requirements: drafting ("DRAFTING") OR solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- helpPoint - Variable in class nxopen.uf.UFModl.BlendFacesLimitData
-
- helpPoint - Variable in class nxopen.uf.UFSket.ConGeom
-
- helpPoint1 - Variable in class nxopen.ISketchHelpedConstraint.HelpData
-
The first help point.
- helpPoint2 - Variable in class nxopen.ISketchHelpedConstraint.HelpData
-
The second help point.
- helpString - Variable in class nxopen.uf.UFAssem.DeformedDefinitionData
-
- helpUrlString - Variable in class nxopen.uf.UFAssem.DeformData
-
- HEM - Static variable in class nxopen.geometricanalysis.GapFlushnessBuilder.PanelTypes
-
type hem
- HEM_AND_SURFACE - Static variable in class nxopen.weld.EasyPatternBuilder.Types
-
Hem vector and surface vectors.
- HEM_VECTOR - Static variable in class nxopen.uf.UFConstants
-
- HemFixerBuilder - Interface in nxopen.tooling
-
Hem Fixer Builder of PDW and EDW.
- HemFlange - Interface in nxopen.features
-
Represents a hem flange feature
To create or edit an instance of this class, use
HemFlangeBuilder
Created in NX5.0.0
- HemFlangeBuilder - Interface in nxopen.features.sheetmetal
-
- HemFlangeBuilder.BendReliefOptions - Class in nxopen.features.sheetmetal
-
This enum represents the Bend relief type of the hem flange.
- HemFlangeBuilder.InsetTypeOptions - Class in nxopen.features.sheetmetal
-
This enum represents the inset type for the material of the hem flange.
- HemFlangeBuilder.TypeOptions - Class in nxopen.features.sheetmetal
-
Represents the Hem Flange type.
- HEMI_DOME - Static variable in class nxopen.display.Background.Type
-
an 3D HDR image displayed in the background
- hemMethod() - Method in interface nxopen.weld.EasyPatternBuilder
-
Returns the hem method.
- HEX - Static variable in class nxopen.annotations.TableCellStyleBuilder.CellFormatTypes
-
Hex
- HEX - Static variable in class nxopen.annotations.TableCellStyleBuilder.FormatType
-
Deprecated.
- HEX - Static variable in class nxopen.cae.ElementTypes.Shape
-
Hexagonal
- HEX - Static variable in class nxopen.preferences.RoutingMechanical.LineColorType
-
- HEX20 - Static variable in class nxopen.uf.UFSf.ElementType
-
- HEX8 - Static variable in class nxopen.uf.UFSf.ElementType
-
- HEXAGON - Static variable in class nxopen.annotations.IdSymbolBuilder.SymbolTypes
-
Hexagon
- HEXAGON - Static variable in class nxopen.annotations.PartsListBuilder.PartsListSymbolType
-
- HEXAGON - Static variable in class nxopen.cam.TurnToolBuilder.InsertShapes
-
Insert shape: Hexagon
- HEXAGON - Static variable in class nxopen.drawings.DrawingCompareSettingsBuilder.ChangeSymbolType
-
- HEXAGONAL - Static variable in class nxopen.die.PierceItemBuilder.HoleShapeType
-
Hexagonal shaped hole
- HEXAGONAL - Static variable in class nxopen.tooling.DieDesPierceInsertBuilder.HoleShapeTypes
-
- HEXAGONAL - Static variable in class nxopen.tooling.RunnerBuilder.SectionType
-
Use hexagonal section type.
- HHMM12 - Static variable in class nxopen.annotations.TableCellStyleBuilder.TimeFormatTypes
-
12 hh:mm AM/PM
- HHMM24 - Static variable in class nxopen.annotations.TableCellStyleBuilder.TimeFormatTypes
-
24 hh:mm
- HHMMSS12 - Static variable in class nxopen.annotations.TableCellStyleBuilder.TimeFormatTypes
-
12 hh:mm:ss AM/PM
- HHMMSS24 - Static variable in class nxopen.annotations.TableCellStyleBuilder.TimeFormatTypes
-
24 hh:mm:ss
- HIDDEN - Static variable in class nxopen.annotations.PartsListBuilder.PartsListShowLockedDeletedRows
-
- HIDDEN - Static variable in class nxopen.annotations.TableCellStyleBuilder.CellFormatTypes
-
Hidden
- HIDDEN - Static variable in class nxopen.annotations.TableCellStyleBuilder.FormatType
-
Deprecated.
- hidden() - Method in interface nxopen.assemblies.AssembliesGeneralPropertiesBuilder
-
Returns the hidden option.
- HIDDEN - Static variable in class nxopen.cae.xyplot.BarColorOption
-
Background color as fill
- HIDDEN - Static variable in class nxopen.cae.xyplot.PlateColorOption
-
Background color as fill
- HIDDEN - Static variable in class nxopen.cae.xyplot.SurfaceColorOption
-
Background color as fill
- HIDDEN - Static variable in class nxopen.drawings.ShipbuildingLinesViewStyle.Lines
-
Hidden
- HIDDEN - Static variable in class nxopen.layer.State
-
Objects on the layer are not visible and not selectable
- hidden - Variable in class nxopen.preferences.RoutingPartLibrary.Column
-
Whether or not the column is used for selection
in the specify item dialog.
- HIDDEN - Static variable in class nxopen.preferences.RoutingPartLibrary.ColumnStatus
-
Column is not displayed in Specify Item.
- HIDDEN - Static variable in class nxopen.preferences.ShipbuildingLinesViewPreferences.Lines
-
Hidden
- HIDDEN_COLOR - Static variable in class nxopen.preferences.PartVisualizationShade.HiddenShadedFaceEdges
-
If any color is selected, hidden shaded face
edges are displayed in that color.
- HIDDEN_EDGE_STYLE_DASHED_IN_BODY_COLOR - Static variable in class nxopen.uf.UFView.HiddenEdgeStyle
-
- HIDDEN_EDGE_STYLE_HIDDEN_GEOMETRY_COLOR - Static variable in class nxopen.uf.UFView.HiddenEdgeStyle
-
- HIDDEN_EDGE_STYLE_INVISIBLE - Static variable in class nxopen.uf.UFView.HiddenEdgeStyle
-
- HIDDEN_GEOMETRY_COLOR - Static variable in class nxopen.preferences.ViewVisualizationVisual.HiddenEdgeStyleType
-
- HIDDEN_LINE_REMOVAL_OFF - Static variable in class nxopen.uf.UFDraw.HiddenLine
-
- HIDDEN_LINE_REMOVAL_ON - Static variable in class nxopen.uf.UFDraw.HiddenLine
-
- HIDDEN_NONSECTION - Static variable in class nxopen.drawings.ShipDraftingViewLinesViewStyle.Lines
-
Hidden, NonSection
- HIDDEN_NONSECTION - Static variable in class nxopen.preferences.ShipDraftingViewLinesViewPreferences.Lines
-
Hidden, NonSection
- HIDDEN_SECTION - Static variable in class nxopen.drawings.ShipDraftingViewLinesViewStyle.Lines
-
Hidden, Section
- HIDDEN_SECTION - Static variable in class nxopen.preferences.ShipDraftingViewLinesViewPreferences.Lines
-
Hidden, Section
- HIDDEN_SURFACE - Static variable in class nxopen.preferences.ViewVisualizationVisual.HiddenEdgesType
-
Deprecated.
Faceted display of all existing and subsequently
created bodies in the selected view
- HIDDEN_VALUE - Static variable in class nxopen.tooling.SpreadsheetData.ParameterStatus
-
The parameter has value, but it should be hidden to user
- HIDDEN_VALUE - Static variable in class nxopen.tooling.SpreadsheetDataParameter.Status
-
The parameter has value, but it should be hidden to user
- HIDDEN_WIREFRAME - Static variable in class nxopen.drawings.ViewWorkflowBuilder.Style
-
- HIDDEN_WIREFRAME - Static variable in class nxopen.preferences.PartDrafting.ViewStyleType
-
Hidden Wireframe
- hiddenColor() - Method in interface nxopen.drawings.TraceLinesViewStyle
-
Returns the hidden color.
- hiddenColor() - Method in interface nxopen.drawings.ViewStyleShipbuildingLinesBuilder
-
Returns the hidden line color on the SHIPBUILDING LINES tab of the View Style Dialog
License requirements: None.
- hiddenColor() - Method in interface nxopen.drawings.ViewStyleTraceLinesBuilder
-
Returns the hidden color on the TRACE LINES tab of the View Style Dialog
License requirements: None.
- hiddenColor() - Method in interface nxopen.preferences.TraceLinesViewPreferences
-
Returns the hidden color.
- hiddenEdgeMode - Variable in class nxopen.uf.UFView.EdgeDisplayOptions
-
- hiddenEdgeMode - Variable in class nxopen.uf.UFView.Visualization
-
- hiddenEdges - Variable in class nxopen.preferences.ViewVisualizationVisual.DisplayAppearanceOptions
-
Appearance of hidden edges
- hiddenEdges - Variable in class nxopen.preferences.ViewVisualizationVisual.SurfaceDisplayOptions
-
Deprecated.
Appearance of hidden edges
- hiddenEdgeStyle() - Method in interface nxopen.preferences.ViewVisualizationVisual
-
Returns the hidden edge display style for shaded faces in the view.
- hiddenEdgeStyle - Variable in class nxopen.uf.UFView.ShadedEdgeOptions
-
- hiddenEdgesType - Variable in class nxopen.preferences.ViewVisualizationVisual.TrueSurfaceDisplayPref
-
Deprecated.
Hidden Edge Type
- hiddenFont() - Method in interface nxopen.drawings.TraceLinesViewStyle
-
Returns the hidden font
License requirements: None.
- hiddenFont() - Method in interface nxopen.drawings.ViewStyleShipbuildingLinesBuilder
-
Returns the hidden line font on the SHIPBUILDING LINES tab of the View Style Dialog
License requirements: None.
- hiddenFont() - Method in interface nxopen.drawings.ViewStyleTraceLinesBuilder
-
Returns the hidden font on the TRACE LINES tab of the View Style Dialog
License requirements: None.
- hiddenFont() - Method in interface nxopen.preferences.TraceLinesViewPreferences
-
Returns the hidden font
License requirements: None.
- hiddenGeometryColor() - Method in interface nxopen.preferences.PartVisualizationColorSetting
-
Returns the color of hidden geometry.
- hiddenGeometryColor() - Method in interface nxopen.preferences.PartVisualizationShade
-
Returns the shade hidden geometry color.
- hiddenGeometryColor - Variable in class nxopen.uf.UFDisp.SystemParams
-
- hiddenLensFlareToggle() - Method in interface nxopen.display.CameraBuilder
-
Returns the hidden lens flare toggle
License requirements: None.
- hiddenline() - Method in interface nxopen.drawings.HiddenLinesViewStyle
-
Returns the status of hiddenline.
- hiddenLine() - Method in interface nxopen.drawings.ViewStyleHiddenLinesBuilder
-
Returns the hidden line toggle on the HIDDEN LINES tab of the View Style Dialog
License requirements: None.
- hiddenline() - Method in interface nxopen.preferences.HiddenLinesViewPreferences
-
Returns the status of hiddenline.
- hiddenLine - Variable in class nxopen.uf.UFDraw.RenderPrefs
-
- hiddenLine - Variable in class nxopen.uf.UFDraw.ViewPrfs
-
- hiddenlineColor() - Method in interface nxopen.drawings.HiddenLinesViewStyle
-
Returns the color of hiddenline.
- hiddenLineColor() - Method in interface nxopen.drawings.ViewCreationWizardBuilder
-
Returns the hidden line color
License requirements: None.
- hiddenlineColor() - Method in interface nxopen.preferences.HiddenLinesViewPreferences
-
Returns the color of hidden line.
- hiddenLineColor - Variable in class nxopen.uf.UFDraw.RenderPrefs
-
- hiddenLineColor - Variable in class nxopen.uf.UFDraw.ViewPrfs
-
- hiddenLineColorFontWidth() - Method in interface nxopen.drawings.AutomationBookletBuilder
-
Returns the hidden line color font width
License requirements: None.
- hiddenlineFont() - Method in interface nxopen.drawings.HiddenLinesViewStyle
-
Returns the font of hiddenline
License requirements: None.
- hiddenLineFont() - Method in interface nxopen.drawings.ViewCreationWizardBuilder
-
Returns the hidden line font
License requirements: None.
- hiddenlineFont() - Method in interface nxopen.preferences.HiddenLinesViewPreferences
-
Returns the font type of hidden line.
- hiddenLineFont - Variable in class nxopen.uf.UFDraw.RenderPrefs
-
- hiddenLineFont - Variable in class nxopen.uf.UFDraw.ViewPrfs
-
- hiddenLineHatching() - Method in interface nxopen.drawings.SectionViewStyle
-
Returns the status of hidden line hatching.
- hiddenLineHatching() - Method in interface nxopen.drawings.ViewStyleSectionBuilder
-
Returns the hidden line hatching toggle on the SECTION tab of the View Style Dialog
License requirements: None.
- hiddenLineHatching() - Method in interface nxopen.preferences.SectionViewPreferences
-
Returns the status of hidden line hatching.
- hiddenLineHatching - Variable in class nxopen.uf.UFDraw.BreakoutData
-
- HiddenLineInterferingSolidsOption - Class in nxopen.preferences
-
Represents the Interfering Solids options
- hiddenLines() - Method in interface nxopen.drawings.ViewCreationWizardBuilder
-
Returns the hidden lines
License requirements: None.
- hiddenLines() - Method in interface nxopen.drawings.ViewStyle
-
Returns object for doing View style settings applicable to HiddenLines .
- hiddenLines() - Method in interface nxopen.preferences.ViewPreferences
-
Returns object for doing View Preferences settings applicable to HiddenLines .
- hiddenLinesColor() - Method in interface nxopen.drawings.CustomViewSettingsBuilder
-
Returns the hidden lines color
License requirements: None.
- hiddenLinesFont() - Method in interface nxopen.drawings.CustomViewSettingsBuilder
-
Returns the hidden lines font
License requirements: None.
- HiddenLineSmallFeatureOption - Class in nxopen.preferences
-
Represents the small feature options
- HiddenLinesViewPreferences - Interface in nxopen.preferences
-
Represents set of Hidden Lines View Preferences applicable to drafting views.
- HiddenLinesViewStyle - Interface in nxopen.drawings
-
Represents set of Hidden Lines View Style Preferences applicable to drafting views.
- hiddenLinesWidth() - Method in interface nxopen.drawings.CustomViewSettingsBuilder
-
Returns the hidden line hidden font
License requirements: None.
- hiddenlineWidth() - Method in interface nxopen.drawings.HiddenLinesViewStyle
-
Returns the width of hiddenline
License requirements: None.
- hiddenLineWidth() - Method in interface nxopen.drawings.ViewCreationWizardBuilder
-
Returns the hidden line width
License requirements: None.
- hiddenlineWidth() - Method in interface nxopen.preferences.HiddenLinesViewPreferences
-
Returns the width of hidden line or edges.
- hiddenLineWidth - Variable in class nxopen.uf.UFDraw.RenderPrefs
-
- hiddenLineWidth - Variable in class nxopen.uf.UFDraw.ViewPrfs
-
- hiddenObjects() - Method in interface nxopen.drawings.BaseViewBuilder
-
Returns the list of objects to not show in the view
License requirements: None.
- hiddenObjects() - Method in interface nxopen.drawings.DetailViewBuilder
-
Returns the list of objects to not show in the view
License requirements: None.
- hiddenObjects() - Method in interface nxopen.drawings.ProjectedViewBuilder
-
Returns the list of objects to not show in the view
License requirements: None.
- hiddenObjects() - Method in interface nxopen.drawings.SectionViewBuilder
-
Returns the hidden objects
License requirements: None.
- hiddenObjects() - Method in interface nxopen.drawings.StandardViewsBuilder
-
Returns the list of objects to not show in the view
License requirements: None.
- hiddenObjects() - Method in interface nxopen.features.shipdesign.SectionViewBuilder
-
Returns the hidden object
License requirements: None.
- HiddenObjectsBuilder - Interface in nxopen.drawings
-
This builder allows the user to select a view in which
component objects can be designated as hidden or shown .
- hiddenShadedFaceEdges - Variable in class nxopen.uf.UFDisp.SystemParams
-
- hiddenWidth() - Method in interface nxopen.drawings.TraceLinesViewStyle
-
Returns the hidden width
License requirements: None.
- hiddenWidth() - Method in interface nxopen.drawings.ViewStyleShipbuildingLinesBuilder
-
Returns the hidden line width on the SHIPBUILDING LINES tab of the View Style Dialog
License requirements: None.
- hiddenWidth() - Method in interface nxopen.drawings.ViewStyleTraceLinesBuilder
-
Returns the hidden width on the TRACE LINES tab of the View Style Dialog
License requirements: None.
- hiddenWidth() - Method in interface nxopen.preferences.TraceLinesViewPreferences
-
Returns the hidden width
License requirements: None.
- hiddenWireframeColor() - Method in interface nxopen.drawings.ViewStyleShadingBuilder
-
Returns the hidden wireframe color on the SHADING tab of the View Style Dialog
License requirements: None.
- hide(View) - Method in interface nxopen.assemblies.Explosion
-
Changes the view so that it no longer shows an exploded view.
- HIDE - Static variable in class nxopen.cae.Post.GroupVisibility
-
- HIDE - Static variable in class nxopen.drawings.CustomViewSettingsBuilder.Features
-
- HIDE - Static variable in class nxopen.facet.BridgeFacetBodyBuilder.Input
-
Hide the input facet body after builder committing
- HIDE - Static variable in class nxopen.facet.MergeFacetBodyBuilder.Input
-
Hide the input facet body after builder committing
- HIDE - Static variable in class nxopen.facet.SewFacetBodyBuilder.Input
-
Hide the input facet body after builder committing
- HIDE - Static variable in class nxopen.features.shipdesign.FeaturesBatchOperationBuilder.Types
-
- HIDE - Static variable in class nxopen.features.StudioSplineBuilderEx.InputCurveOptions
-
Hide original curve
- HIDE - Static variable in class nxopen.features.subdivision.ExtractCagePolylineBuilder.InputCurveOption
-
Hide input curves
- HIDE - Static variable in class nxopen.fields.DisplayPropertiesBuilder.DepDispTypeEnum
-
- HIDE - Static variable in class nxopen.fields.DisplayPropertiesBuilder.IndepDomDispType
-
- HIDE - Static variable in class nxopen.fields.DisplayPropertiesBuilder.TblPointTypeEnum
-
- HIDE - Static variable in class nxopen.fields.DisplayPropertiesBuilder.ValuesEnum
-
- HIDE - Static variable in class nxopen.preferences.HiddenLineSmallFeatureOption
-
Hide
- HIDE - Static variable in class nxopen.tooling.AssemblyDrawingBuilder.AttributeValues
-
- HIDE - Static variable in class nxopen.tooling.BlendCurve3DBuilder.InputCurvesOption
-
Hide input curves
- HIDE - Static variable in class nxopen.tooling.BomBuilder.TreeList
-
A list includes hidden components
- HIDE - Static variable in class nxopen.tooling.QuickQuotationBuilder.ManageTemporaryObjectsTypes
-
- HIDE_ALL - Static variable in class nxopen.display.PlanarShipGridBuilder.LabelDisplayOption
-
Hide label for all grid lines
- HIDE_COMPONENTS_WITH_ATTRIBUTE - Static variable in class nxopen.tooling.ObjectAttributeManagementBuilder.ShowComponentsType
-
- HIDE_LIST - Static variable in class nxopen.tooling.BomListBuilder.BomListTypes
-
A list includes hidden components
- HIDE_ONLY - Static variable in class nxopen.View.ShowOrHideType
-
- HIDE_STATUS - Static variable in class nxopen.tooling.SpreadsheetData.ParameterStatus
-
Not shown in UI
- HIDE_STATUS - Static variable in class nxopen.tooling.SpreadsheetDataParameter.Status
-
Not shown in UI
- HIDE_TEXT - Static variable in class nxopen.annotations.HoleTableSettingsFormatBuilder.DeletedHolesDisplayType
-
HideText
- hideBlankGeometry() - Method in interface nxopen.cam.SimulationOptionsBuilder
-
Returns the hide blank geometry
License requirements: None.
- hideBodyOption() - Method in interface nxopen.features.MidSurfaceByFacePairsBuilder
-
Returns the hide solid body option
License requirements: None.
- hideByType(DisplayManager.ShowHideType, DisplayManager.ShowHideScope) - Method in interface nxopen.DisplayManager
-
- hideByType(String, DisplayManager.ShowHideScope) - Method in interface nxopen.DisplayManager
-
Hides a set of objects by type.
- hideCollaborativeDesignPreview() - Method in interface nxopen.assemblies.Subset
-
Hides the preview for the Collaborative Design in the graphics window if it was
already displayed.
- hideComponent(Tag, Tag) - Method in interface nxopen.uf.UFAssem
-
- HideComponentBuilder - Interface in nxopen.assemblies
-
- hideComponents(NXObject[]) - Method in interface nxopen.drawings.DraftingView
-
Sets the view origin at the provided location.
- hideConstructionProcess() - Method in interface nxopen.features.shipdesign.RollingLineBuilder
-
Returns the value specifying if the construction process should be hidden.
- hideDimensions(DisplayableObject[]) - Method in interface nxopen.Sketch
-
Blanks dimensions in the active sketch associated with the input sketch geometry.
- hideDimensions() - Method in interface nxopen.Sketch
-
Blanks all the dimensions of input sketch
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- hideDimensions(Sketch.ConstraintGeometry[]) - Method in interface nxopen.Sketch
-
Blanks dimensions in the active sketch associated with the input sketch geometry.
- hideEntry(ContextMenuEntry) - Method in interface nxopen.menubar.ContextMenu
-
Prevents the indicated menu entry from being shown on the menu.
- hideFeetAndInchMarks() - Method in interface nxopen.drafting.AutomationRuleBuilder
-
Returns the hide feet and inch marks option Show/Hide feet and inch marks.
- hideFeetInchMark() - Method in interface nxopen.drafting.AutomationPreferencesBuilder
-
Returns the hide feet inch mark
License requirements: None.
- hideFormboardConstraints() - Method in interface nxopen.formboard.FormboardManager
-
Hides the formboard constraints.
- hideInputMeshes(boolean) - Method in interface nxopen.cae.modelcheck.ElementEdgeCheckBuilder
-
Hides or unhides the input meshes
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- hideMarksBelow - Variable in class nxopen.cae.Post.Mark
-
- hideOriginal() - Method in interface nxopen.features.CompositeCurveBuilder
-
Returns the hide original
License requirements: None.
- hideOriginal() - Method in interface nxopen.features.ExtractFaceBuilder
-
Returns the option to specify if the original faces should be hidden
License requirements: None.
- hideOriginal() - Method in interface nxopen.features.FreeTransformerBuilder
-
Returns the option to hide the original geometries after creating new geometries
License requirements: None.
- hideOriginal() - Method in interface nxopen.features.GeomcopyBuilder
-
Returns the hide original
License requirements: None.
- hideOriginal() - Method in interface nxopen.features.MeshTransformerBuilder
-
Returns the option to hide the original geometries after creating new geometries
License requirements: None.
- hideOriginal() - Method in interface nxopen.features.PatternGeometryBuilder
-
Returns the hide original option.
- hideOriginal() - Method in interface nxopen.features.sheetmetal.CleanUpUtilityBuilder
-
Returns the hide original
License requirements: None.
- hideOriginal() - Method in interface nxopen.features.shipdesign.MarkingLineBuilder
-
Returns the option to hide original marking lines.
- hideOriginal() - Method in interface nxopen.features.UntrimBuilder
-
Returns the hide original option.
- hideOriginal() - Method in interface nxopen.features.WaveDatumBuilder
-
Returns the hideoriginal
License requirements: None.
- hideOriginal() - Method in interface nxopen.features.WaveSketchBuilder
-
Returns the hide original option
License requirements: None.
- hideOriginal() - Method in interface nxopen.geometricutilities.SnipIntoPatchesBuilder
-
Returns the option indicating to hide or show the original.
- hideOriginalCurves() - Method in interface nxopen.features.sheetmetal.UnbendBuilder
-
Returns the option to keep or hide input curves
License requirements: None.
- hideParentCurves(Tag, int, UFModl.ParentDispInfo[], int, UFModl.ParentDispInfo[]) - Method in interface nxopen.uf.UFModlGeneral
-
- hidePartGeometry() - Method in interface nxopen.cam.SimulationOptionsBuilder
-
Returns the hide part geometry
License requirements: None.
- hidePositioningDimensions() - Method in interface nxopen.features.RPOBuilder
-
Hides display of all the positioning dimensions
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING")
.
- hideReliefStatus() - Method in interface nxopen.tooling.ReliefDesignBuilder
-
Returns the option to hide (true) or show (false) the relief.
- hideSafeZone() - Method in interface nxopen.tooling.DieEngTrimAngleCheckBuilder
-
Returns the option to indicate whether to hide the feedback objects whose trim angles are in the safe zone or not
License requirements: None.
- hideSmoothEdges() - Method in interface nxopen.STLImporter
-
Returns the Hide Smooth Edges flag.
- hideSmoothEdges - Variable in class nxopen.uf.UFStd.StlParams
-
- hideSmoothEdges - Variable in class nxopen.uf.UFStd.VrmlParams
-
- hideSmoothEdges() - Method in interface nxopen.VRMLImporter
-
Returns the Hide Smooth Edges flag.
- hideSubBlocksAsString() - Method in interface nxopen.blockstyler.LineColorFontWidth
-
Returns the hide sub block.
- hideTool() - Method in interface nxopen.features.sheetmetal.SolidPunchBuilder
-
Returns the option to hide the tool body after creating the punch.
- hideToolBodyFlag() - Method in interface nxopen.features.AssemblyCutBuilder
-
Returns the hide tool body flag
License requirements: None.
- hideViewBorder() - Method in interface nxopen.drawings.DraftingView
-
Hide the view border of the view.
- HIERARCHICAL - Static variable in class nxopen.assemblies.Subset.PartitionViewStyleType
-
Show hierachical view style for subset
- HIGH - Static variable in class nxopen.bodydes.OnestepUnformBuilder.Convergency
-
Onestep solver convergency level is high
- HIGH - Static variable in class nxopen.cae.CfdContactPreventionConstraintBuilder.Priority
-
- HIGH - Static variable in class nxopen.cae.CfdLocalResolutionConstraintBuilder.Priority
-
- HIGH - Static variable in class nxopen.CGMBuilder.ImageResolutionOption
-
High Resolution
- HIGH - Static variable in class nxopen.die.TrimLineDevelopmentBuilder.Convergency
-
Onestep solver convergency level is high
- HIGH - Static variable in class nxopen.display.ImageBasedLighting.ImageBlurType
-
- HIGH - Static variable in class nxopen.display.RayTracedStudioBuilder.StationaryDisplayQualityType
-
Very good ray traced display quality when dynamic interaction stops
- HIGH - Static variable in class nxopen.display.RayTracedStudioEditorBuilder.DynamicRayTracedStudioTilingQualityType
-
Very small tiles used during progressive updates of ray traced display
- HIGH - Static variable in class nxopen.display.RayTracedStudioEditorBuilder.RayTracedStudioStaticImageResolutionType
-
static image output resolution of 300 DPI (dots per inch)
- HIGH - Static variable in class nxopen.display.RayTracedStudioEditorBuilder.StaticAntialiasingType
-
Very good antialiasing performed for static image rendering
- HIGH - Static variable in class nxopen.display.RayTracedStudioEditorBuilder.StaticRayTracedStudioQualityType
-
Very good ray traced display quality for static image rendering
- HIGH - Static variable in class nxopen.display.RayTracedStudioEditorBuilder.StationaryRayTracedStudioQualityType
-
Very good ray traced display quality when dynamic interaction stops
- HIGH - Static variable in class nxopen.display.Shadows.SsaoContrastType
-
High contrast
- HIGH - Static variable in class nxopen.display.Shadows.SsaoQualityType
-
High quality setting
- HIGH - Static variable in class nxopen.facet.MultiPatchAlignmentBuilder.ResolutionType
-
Uses a high number of facets for the alignment.
- HIGH - Static variable in class nxopen.features.MeshTransformerBuilder.SmoothingType
-
Smoothing high
- HIGH - Static variable in class nxopen.features.vehicledesign.ReflectionDataBuilder.ResolutionType
-
high
- HIGH - Static variable in class nxopen.PlotBuilder.ImageResolutionOption
-
High Resolution
- HIGH - Static variable in class nxopen.preferences.SessionVisualizationHighQualityImage.ResolutionType
-
- HIGH - Static variable in class nxopen.PrintBuilder.ImageResolutionOption
-
High Resolution
- HIGH - Static variable in class nxopen.PrintPDFBuilder.ImageResolutionOption
-
High Resolution
- HIGH - Static variable in class nxopen.visualreporting.GroupLabel.TagPriorityOption
-
Hign priority
- HIGH_POINT - Static variable in class nxopen.cam.InspectionMethodBuilder.DatumPlaneFittingTypes
-
High Point
- HIGH_QUALITY - Static variable in class nxopen.uf.UFDisp.ShadeMethod
-
- HIGH_SPEED_ARC - Static variable in class nxopen.cam.NcmPlanarEngRetBuilder.EngRetTypes
-
High Speed Arcs
- HIGH_TO_LOW - Static variable in class nxopen.cam.FlowCutSteepContainment.SteepCutDirectionTypes
-
High to Low
- highEnd - Variable in class nxopen.uf.UFModl.UdfsExp
-
- highFrequencyCutoff() - Method in interface nxopen.cae.CorrelSolutionBuilder
-
Returns the high-frequency cutoff for work modes
License requirements: None.
- highFrequencyCutoff() - Method in interface nxopen.cae.PreTestSolutionBuilder
-
Returns the high-frequency cutoff
License requirements: None.
- highFrequencyFilteringMode() - Method in interface nxopen.cae.CorrelSolutionBuilder
-
Returns the high-frequency filtering option for work modes
License requirements: None.
- highFrequencyFilteringMode() - Method in interface nxopen.cae.PreTestSolutionBuilder
-
Returns the high-frequency filtering option
License requirements: None.
- highlight() - Method in interface nxopen.DisplayableObject
-
Highlights the object.
- HIGHLIGHT - Static variable in class nxopen.features.shipdesign.RollingLineBuilder.ConstructionMethodTypes
-
Use an initial value method and march along the highlight (zero degree isocline) at each subsequent location.
- HIGHLIGHT - Static variable in class nxopen.motion.PackagingInterferenceBuilder.Action
-
Highlight interfering bodies.
- HIGHLIGHT_EDGES - Static variable in class nxopen.display.SelPref.FaceAnalysisViews
-
highlight face by edges
- HIGHLIGHT_EDGES - Static variable in class nxopen.display.SelPref.ShadedViews
-
highlight face by edges
- HIGHLIGHT_FACES - Static variable in class nxopen.display.SelPref.FaceAnalysisViews
-
highlight face by face
- HIGHLIGHT_FACES - Static variable in class nxopen.display.SelPref.ShadedViews
-
highlight face by face
- highlightCollision() - Method in interface nxopen.tooling.RunSimulationBuilder
-
Returns the highlight collision bodies flag
License requirements: None.
- highlightColor() - Method in interface nxopen.annotations.PartsListBuilder
-
Returns the highlight color specifies the color used for the delimiters that highlight manual cell text
License requirements: None.
- highlightColor - Variable in class nxopen.DisplayManager.J3dMaterial
-
object highlight color
- highlightConnectingFacesScale() - Method in interface nxopen.tooling.MWSearchRegionBuilder
-
Returns the highlight connecting faces scale
License requirements: None.
- highlightDamageValues() - Method in interface nxopen.cae.DurabilityDamageEvaluationBuilder
-
Returns the highlighting of non-zero damage values.
- HIGHLIGHTED - Static variable in class nxopen.uf.UFDraw.SxsegHighlight
-
- highlightFaceTranslucency() - Method in interface nxopen.preferences.SubdivisionModelingPreferences
-
Returns the percentage translucency of the highlighted face.
- highlightHiddenEdgesToggle() - Method in interface nxopen.display.SelPref
-
Returns the highlight hidden edges toggle
License requirements: None.
- HIGHLIGHTING - Static variable in class nxopen.sim.SimDebugBuilder.DumpType
-
Dump Highlighting
- HIGHLIGHTING - Static variable in class nxopen.sim.SimDebugBuilder.TraceType
-
Trace Highlighting
- HighlightLinesAnalysis - Interface in nxopen.geometricanalysis
-
Represents a Highlight Lines Analysis object.
- HighlightLinesAnalysisBuilder - Interface in nxopen.geometricanalysis
-
- HighlightLinesAnalysisBuilder.DisplayMethods - Class in nxopen.geometricanalysis
-
- HighlightLinesAnalysisBuilder.LightPlacements - Class in nxopen.geometricanalysis
-
light placement
- HighlightLinesAnalysisBuilder.LightPlaneOptions - Class in nxopen.geometricanalysis
-
light plane options
- HighlightLinesAnalysisBuilder.Resolutions - Class in nxopen.geometricanalysis
-
resolution options
- HighlightLinesAnalysisBuilder.Types - Class in nxopen.geometricanalysis
-
- HighlightLinesAnalysisBuilder.Types2 - Class in nxopen.geometricanalysis
-
four types of display methods
- highlightManualText() - Method in interface nxopen.annotations.PartsListBuilder
-
Returns the highlight manual text specifies whether manual cell text is to be highlighted by delimiters
License requirements: None.
- highlightManualText - Variable in class nxopen.uf.UFPlist.Prefs
-
- highlightNextPair() - Method in interface nxopen.geometricanalysis.SimpleInterference
-
- highlightOnCollision() - Method in interface nxopen.mechatronics.CollisionBodyBuilder
-
Returns the highlight on collision.
- highlightOnCollision() - Method in interface nxopen.mechatronics.CollisionSensorBuilder
-
Returns the option of highlight on collision.
- highlightOriginalToggle() - Method in interface nxopen.display.SelPref
-
Returns the highlight original
License requirements: None.
- highlightResult(ExamineGeometry.Check) - Method in interface nxopen.geometricanalysis.ExamineGeometry
-
Highlights results of a specified type of check.
- highlightRunNavItems(NXObject[], boolean) - Method in interface nxopen.routing.FindByAttributesBuilder
-
Highlight/Unhighlight the search results for FindByAttributes
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- highlightSelectedFace() - Method in interface nxopen.tooling.FaceColorManagementBuilder
-
Returns the option whether to highlight selected faces
License requirements: None.
- highlightSelectionOnRolloverToggle() - Method in interface nxopen.display.SelPref
-
Returns the highlight selection on rollover toggle
License requirements: None.
- highlightStatus - Variable in class nxopen.uf.UFDraw.SxsegInfo
-
- highlightStatus - Variable in class nxopen.uf.UFObj.DispProps
-
- highlightTargets() - Method in interface nxopen.cae.SimBCDisplay
-
Returns the flag indicating whether or not highlighting of targets is required
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- highlightView() - Method in interface nxopen.routing.electrical.CablewaysLayoutView
-
Highlights the layout view.
- highlightWire() - Method in interface nxopen.preferences.RoutingElectrical
-
Returns the option to highlight a wire in the connection list navigator.
- highlightWithThickWidthToggle() - Method in interface nxopen.display.SelPref
-
Returns the highlight with thick width toggle
License requirements: None.
- highPrecisionRotation() - Method in interface nxopen.preferences.SessionVisualizationScreen
-
Returns whether mouse-driven rotation is to be done using a higher precision
than normal, which means that a given mouse motion will result in
a smaller rotation.
- highQualityBitmap() - Method in interface nxopen.blockstyler.Button
-
Returns the HighQualityBitmap
License requirements: None.
- highQualityBitmap() - Method in interface nxopen.blockstyler.Enumeration
-
Returns the HighQualityBitmap
License requirements: None.
- highQualityBitmap() - Method in interface nxopen.blockstyler.Label
-
Returns the HighQualityBitmap
License requirements: None.
- highQualityBitmap() - Method in interface nxopen.blockstyler.TabControl
-
Returns the HighQualityBitmap
License requirements: None.
- highQualityBitmap() - Method in interface nxopen.blockstyler.Wizard
-
Returns the HighQualityBitmap.
- highQualityImageVisualization() - Method in interface nxopen.preferences.SessionPreferences
-
Returns object for doing Visualization High Quality Image preferences settings applicable to entire session .
- highRadius() - Method in interface nxopen.geometricutilities.ReduceSurfaceRadiusBuilder
-
Returns the high radius which specifies lower limit to filter out all qualified faces
License requirements: None.
- highThicknessColor() - Method in interface nxopen.cae.ThicknessBuilder
-
Returns the above high color
License requirements: None.
- HIGHTLIGHT_MEASURE - Static variable in class nxopen.preferences.SessionMeasureRequirements.ActionOnViolation
-
Highlight (color) measure for requirements violations
- HILITE - Static variable in class nxopen.features.SectionSurfaceBuilderEx.ConicType
-
Hilite mode
- HILL - Static variable in class nxopen.cae.DurabilityEventFatigueSettingsBuilder.OrthotropicFatigueCriterionEnum
-
- HILL - Static variable in class nxopen.cae.DurabilityEventStrengthSettingsBuilder.OrthotropicFailureCriterionEnum
-
Hill
- HILL - Static variable in class nxopen.cae.LaminatePly.PlyFailureTheoryType
-
Hill failure criteria
- hingeDirection() - Method in interface nxopen.drawings.SectionLineBuilder
-
- hingeDistance() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the distance to move the reference point of the active hood.
- HingeJoint - Interface in nxopen.mechatronics
-
Represents the Hinge Joint.
- HingeJointBuilder - Interface in nxopen.mechatronics
-
- HingeJointCollection - Interface in nxopen.mechatronics
-
Represents a collection of Hinge Joint.
- hingeJoints() - Method in interface nxopen.mechatronics.PhysicsManager
-
- hingeLine() - Method in interface nxopen.drawings.OrientationViewStyle
-
Returns the hinge line for an existing auxillary view.
- hingeLine() - Method in interface nxopen.drawings.ViewStyleOrientationBuilder
-
Returns the view hinge line definition on the ORIENTATION tab of the View Style Dialog
License requirements: None.
- HingeLineBuilder - Interface in nxopen.drawings
-
Represents a Drawings.HingeLineBuilder.
- HingeLineBuilder.Hingeline - Class in nxopen.drawings
-
Specifies the hinge line vector option
- hingePoint() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the point about which to rotate the active hood.
- HIP_BREADTH - Static variable in class nxopen.HumanData.AdvancedScalingType
-
Indicate scaling of hip_breadth
- HIP_POINT - Static variable in class nxopen.HumanData.EditDisplayBodyParts
-
Indicate edit display body parts named hip point
- hipPoint() - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder
-
Returns the hip point of the driver.
- hiqhQualityImage() - Method in interface nxopen.ModelingView
-
Returns the High Quality Image instance belonging to a view .
- historyBuffer() - Method in interface nxopen.cam.SimulationOptionsBuilder
-
Returns the history buffer
License requirements: None.
- HistoryEventInformation() - Constructor for class nxopen.BasePart.HistoryEventInformation
-
- HistoryEventInformation(String, String, String, String, int) - Constructor for class nxopen.BasePart.HistoryEventInformation
-
Constructor for the HistoryEventInformation object.
- hitBody - Variable in class nxopen.uf.UFModl.RayHitPointInfo
-
- hitFace - Variable in class nxopen.uf.UFModl.RayHitPointInfo
-
- hitList - Variable in class nxopen.uf.UFModeling.TraceARayData
-
- hitNormal - Variable in class nxopen.uf.UFModl.RayHitPointInfo
-
- hitPoint - Variable in class nxopen.uf.UFModl.RayHitPointInfo
-
- hmop() - Method in interface nxopen.UFSession
-
- HOFFMAN - Static variable in class nxopen.cae.DurabilityEventStrengthSettingsBuilder.OrthotropicFailureCriterionEnum
-
Hoffman
- HOFFMAN - Static variable in class nxopen.cae.LaminatePly.PlyFailureTheoryType
-
Hoffman failure criteria
- HOLD_TO_LINE - Static variable in class nxopen.facet.BestFitAlignBuilder.ConstraintOptions
-
Moving along the line
- HOLD_TO_PLANE - Static variable in class nxopen.facet.BestFitAlignBuilder.ConstraintOptions
-
Moving in the plane
- HOLDER - Static variable in class nxopen.tooling.ElectrodeComponentBuilder.Chuck
-
- holderAngleBuilder() - Method in interface nxopen.cam.TurningToolBuilder
-
Returns the holder angle builder (inheritable double)
License requirements: cam_base ("CAM BASE")
.
- holderCheck() - Method in interface nxopen.cam.ToolPathEditorBuilder
-
Returns the holder check
License requirements: None.
- holderClearance() - Method in interface nxopen.cam.CutParameters
-
Returns the Holder Clearance
License requirements: None.
- holderClearance() - Method in interface nxopen.cam.ToolPathSplitBuilder
-
Returns the Holder Clearance
License requirements: None.
- holderControlAngleBuilder() - Method in interface nxopen.cam.TurnToolBuilder
-
Returns the holder control angle (inheritable double)
License requirements: cam_base ("CAM BASE")
.
- holderControlWidthBuilder() - Method in interface nxopen.cam.TurnToolBuilder
-
Returns the holder control width (inheritable double)
License requirements: cam_base ("CAM BASE")
.
- holderDescription() - Method in interface nxopen.cam.ToolBuilder
-
Returns the holder description
License requirements: None.
- holderGrooveHand() - Method in interface nxopen.cam.GrooveToolBuilder
-
Returns the holder groove hand
License requirements: cam_base ("CAM BASE")
.
- holderHand() - Method in interface nxopen.cam.GrooveToolBuilder
-
Returns the holder hand
License requirements: None.
- holderHand() - Method in interface nxopen.cam.TurnToolBuilder
-
Returns the turn holder hand
License requirements: None.
- holderId() - Method in interface nxopen.sim.KinematicComponentBuilder
-
Returns the holder id
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- holderIdString() - Method in interface nxopen.sim.KinematicComponentBuilder
-
Returns the holder id in string
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- holderInsertExtensionBuilder() - Method in interface nxopen.cam.GrooveToolBuilder
-
Returns the holder insert extension builder (inheritable double) for groove tools
License requirements: cam_base ("CAM BASE")
.
- holderLengthBuilder() - Method in interface nxopen.cam.TurningToolBuilder
-
Returns the turn holder length builder (inheritable double)
License requirements: cam_base ("CAM BASE")
.
- holderLibraryReference() - Method in interface nxopen.cam.ToolBuilder
-
Returns the holder libref
License requirements: None.
- holderLock() - Method in interface nxopen.cam.TurningToolBuilder
-
Returns the lock turn holder toggle
License requirements: None.
- holderNumber() - Method in interface nxopen.cam.ToolChangeCiBuilder
-
Returns the Tool holder builder
License requirements: None.
- holderSection() - Method in interface nxopen.cam.SoftTool
-
Returns the holder sections
License requirements: None.
- HolderSection() - Constructor for class nxopen.uf.UFCutter.HolderSection
-
- HolderSection(double, double, double, double) - Constructor for class nxopen.uf.UFCutter.HolderSection
-
- HolderSectionBuilder - Interface in nxopen.cam
-
Represents a Holder Section Builder .
- holderSectionBuilder() - Method in interface nxopen.cam.MillingToolBuilder
-
Returns the holder sections builder
License requirements: cam_base ("CAM BASE")
.
- HolderSectionBuilder.AllParametersData - Class in nxopen.cam
-
- HolderSectionBuilder.Data - Class in nxopen.cam
-
- holderShankLineBuilder() - Method in interface nxopen.cam.TurningToolBuilder
-
Returns the turn holder shank line builder (inheritable double)
License requirements: cam_base ("CAM BASE")
.
- holderShankType() - Method in interface nxopen.cam.TurningToolBuilder
-
Returns the turn holder shank type
License requirements: None.
- holderShankWidthBuilder() - Method in interface nxopen.cam.TurningToolBuilder
-
Returns the turn holder shank width builder (inheritable double)
License requirements: cam_base ("CAM BASE")
.
- holderStyle() - Method in interface nxopen.cam.GrooveToolBuilder
-
Returns the holder style
License requirements: None.
- holderStyle() - Method in interface nxopen.cam.TurnToolBuilder
-
Returns the turn holder style
License requirements: None.
- holderToggle() - Method in interface nxopen.cam.ToolChangeCiBuilder
-
Returns the Tool holder toggle
License requirements: None.
- holderUse() - Method in interface nxopen.cam.TurningToolBuilder
-
Returns the use turn holder toggle
License requirements: None.
- holderWidthBuilder() - Method in interface nxopen.cam.TurningToolBuilder
-
Returns the turn holder width builder (inheritable double)
License requirements: cam_base ("CAM BASE")
.
- holdingForce() - Method in interface nxopen.tooling.ForceCalculationBuilder
-
Returns the pressure-pad-force of the process.
- HoldingSystemBuilder - Interface in nxopen.cam
-
- HoldingSystemBuilderList - Interface in nxopen.cam
-
Represents a list of objects.
- HOLE - Static variable in class nxopen.annotations.DimensionType
-
Hole dimension
- HOLE - Static variable in class nxopen.annotations.FitAnsiHoleType
-
Use hole values for the ANSI limit and fit tolerance
- HOLE - Static variable in class nxopen.annotations.SearchCriteriaCalloutBuilder.CalloutTypes
-
Hole
- HOLE - Static variable in class nxopen.cam.HoleBossGeom.HoleBossTypes
-
Type: Hole
- HOLE - Static variable in class nxopen.features.DeleteFaceBuilder.SelectTypes
-
This stands for delete hole type.
- Hole - Interface in nxopen.features
-
Represents a Hole feature
To create or edit an instance of this class, use nxopen.features.HoleFeatureBuilder
Created in NX3.0.0
- HOLE - Static variable in class nxopen.features.sheetmetal.AeroLighteningCutoutBuilder.Types
-
- HOLE - Static variable in class nxopen.tooling.FastenerAssy.SelectionTypeMethod
-
Hole type
- HOLE - Static variable in class nxopen.tooling.ScrapDesignBuilder.RemoveType
-
Captures hole scraps
- Hole.CounterboreHoleData - Class in nxopen.features
-
- Hole.CountersinkHoleData - Class in nxopen.features
-
- Hole.SimpleHoleData - Class in nxopen.features
-
- Hole.Subtype - Class in nxopen.features
-
Represents the subtype of the hole
- HOLE_BOUNDARY - Static variable in class nxopen.tooling.ScrapDesignBuilder.ScrapDefType
-
Hole boundary curves will be extracted automatically to create scraps
- HOLE_CALLOUT - Static variable in class nxopen.annotations.DimensionMeasurementBuilder.MeasurementMethod
-
Hole Callout based measurement
- HOLE_DATUM_LOCATION - Static variable in class nxopen.uf.UFConstants
-
- HOLE_DATUM_LOCATION_NON_ASSOC - Static variable in class nxopen.uf.UFConstants
-
- HOLE_FEATURE - Static variable in class nxopen.uf.UFGdt.FeatureType
-
- HOLE_MEASUREMENT_LOCATION - Static variable in class nxopen.uf.UFConstants
-
- HOLE_MEASUREMENT_LOCATION_NON_ASSOC - Static variable in class nxopen.uf.UFConstants
-
- HOLE_SERIES - Static variable in class nxopen.features.HolePackageBuilder.Types
-
Hole series
- HOLE_TYPE_SYMBOL_AND_NUMBER - Static variable in class nxopen.annotations.HoleTableSettingsLabelBuilder.IndexType
-
Hole Type Symbol and Number
- HOLE_VECTOR - Static variable in class nxopen.uf.UFConstants
-
- holeAllowNonCircularHolesToggle() - Method in interface nxopen.cae.MeshControlBuilder
-
Returns the hole allow non circular holes filter toggle
License requirements: None.
- holeAttributes() - Method in interface nxopen.die.HeelpostBuilder
-
Returns the hole attributes
License requirements: None.
- HoleAttributesData() - Constructor for class nxopen.die.HoleChildBuilder.HoleAttributesData
-
- HoleAttributesData() - Constructor for class nxopen.die.HoleParentBuilder.HoleAttributesData
-
- HoleAttributesData() - Constructor for class nxopen.die.PadChildBuilder.HoleAttributesData
-
- HoleAttributesData() - Constructor for class nxopen.die.PadParentBuilder.HoleAttributesData
-
- HoleAttributesData() - Constructor for class nxopen.die.PierceHoleChildBuilder.HoleAttributesData
-
- HoleAttributesData() - Constructor for class nxopen.die.PierceHoleParentBuilder.HoleAttributesData
-
- holeAxisType() - Method in interface nxopen.cam.OperationBuilder
-
Returns the Hole Axis Type
License requirements: None.
- holeBossGeom() - Method in interface nxopen.cam.GeometryCiBuilder
-
Returns the hole or boss geometry
License requirements: cam_base ("CAM BASE")
.
- HoleBossGeom - Interface in nxopen.cam
-
Represents a CAM geometry builder
This is an abstract class and cannot be instantiated.
- holeBossGeom() - Method in interface nxopen.cam.HoleBossGeometry
-
Returns the sub builder for hole boss geom
License requirements: None.
- HoleBossGeom.DepthLimitTypes - Class in nxopen.cam
-
- HoleBossGeom.FormData - Class in nxopen.cam
-
- HoleBossGeom.FormPitchTypes - Class in nxopen.cam
-
the form and pitch types .
- HoleBossGeom.FormTypes - Class in nxopen.cam
-
the Form types .
- HoleBossGeom.HoleBossTypes - Class in nxopen.cam
-
the hole or boss types .
- HoleBossGeom.OptimizationTypes - Class in nxopen.cam
-
the optimization types .
- HoleBossGeom.RotationTypes - Class in nxopen.cam
-
the rotation types .
- HoleBossGeometry - Interface in nxopen.cam
-
Represents a CAM geometry builder
To create a new instance of this class, use nxopen.cam.NCGroupCollection#createHoleBossGeometryBuilder
Created in NX7.5.0
- holeBossGeomType() - Method in interface nxopen.cam.HoleBossGeom
-
Returns the hole or boss types
License requirements: None.
- HoleBossSet - Interface in nxopen.cam
-
- HoleBossSet.DepthLimitTypes - Class in nxopen.cam
-
the depth limit types .
- HoleBossSetList - Interface in nxopen.cam
-
Represents a list of objects.
- holeCalloutSettings() - Method in interface nxopen.annotations.StyleBuilder
-
Returns the hole callout settings builder
License requirements: None.
- HoleCalloutSettingsBuilder - Interface in nxopen.annotations
-
- HoleCalloutSettingsBuilder.Featuretype - Class in nxopen.annotations
-
This reprensent the option that indicates a type of hole features.
- HoleCalloutSettingsBuilder.LeaderAttachment - Class in nxopen.annotations
-
This reprensent the option that indicates the position for the leader to attach to.
- HoleCalloutSettingsBuilder.Parametertype - Class in nxopen.annotations
-
This reprensent the option that indicates a type of hole feature parameters.
- holeCenter() - Method in interface nxopen.features.sheetmetal.AeroLighteningCutoutBuilder
-
Returns the hole center
License requirements: None.
- HoleChildBuilder - Interface in nxopen.die
-
Represents a Die Hole Child sub feature.
- HoleChildBuilder.HoleAttributesData - Class in nxopen.die
-
- HoleChildBuilder.PadAttributesData - Class in nxopen.die
-
- holeColor() - Method in interface nxopen.tooling.ScrapDesignBuilder
-
Returns the hole color
License requirements: None.
- holeDepth() - Method in interface nxopen.cam.OperationBuilder
-
Returns the max depth distance builder
License requirements: None.
- holeDepth() - Method in interface nxopen.geometricutilities.EndHoleData
-
Returns the hole depth
License requirements: None.
- holeDepth() - Method in interface nxopen.tooling.WireHoleBuilder
-
Returns the depth of wire hole.
- holeDepthLimitOption() - Method in interface nxopen.features.HolePackageBuilder
-
Returns the hole depth limit - this is applicable for general hole, threaded hole and drill size hole type
License requirements: None.
- holeDepthLimitOption() - Method in interface nxopen.geometricutilities.EndHoleData
-
Returns the hole depth limit
License requirements: None.
- holeDepthType() - Method in interface nxopen.cam.OperationBuilder
-
Returns the Hole Depth Type
License requirements: None.
- holeDiameter() - Method in interface nxopen.cae.SuppressHoleBuilder
-
Returns the holedia
License requirements: None.
- holeDiameter() - Method in interface nxopen.die.PadChildBuilder
-
Returns the hole diameter of the die pad.
- holeDiameter() - Method in interface nxopen.die.PadParentBuilder
-
Returns the hole diameter of die pads.
- holeDiameter() - Method in interface nxopen.geometricutilities.EndHoleData
-
Returns the hole diameter
License requirements: None.
- holeDiameter() - Method in interface nxopen.geometricutilities.MiddleHoleData
-
Returns the hole diameter
License requirements: None.
- holeDiameter() - Method in interface nxopen.geometricutilities.StartHoleData
-
Returns the hole diameter
License requirements: None.
- holeDiameter() - Method in interface nxopen.tooling.WireHoleBuilder
-
Returns the diameter to create wire hole
License requirements: None.
- holeDiameterAttributes() - Method in interface nxopen.die.HeelpostBuilder
-
Returns the hole diameter attributes (only the title is used)
License requirements: None.
- HoleDimension - Interface in nxopen.annotations
-
Represents a hole dimension
To create or edit an instance of this class, use
RadialDimensionBuilder
Created in NX4.0.0
- HoleDrilling - Interface in nxopen.cam
-
Represents a Hole Drilling Operation
To create or edit an instance of this class, use
HoleDrillingBuilder
Created in NX9.0.1
- HoleDrillingBuilder - Interface in nxopen.cam
-
- HoleDrillingCutParameters - Interface in nxopen.cam
-
Represents a HoleDrillingCutParameters Builder .
- holeFace() - Method in interface nxopen.features.sheetmetal.AeroLighteningCutoutBuilder
-
Returns the hole face
License requirements: None.
- holeFace() - Method in interface nxopen.tooling.RemoveHolesBuilder
-
Returns the hole faces
License requirements: None.
- holeFace - Variable in class nxopen.uf.UFModl.SmholeData
-
- holeForm() - Method in interface nxopen.geometricutilities.StartHoleData
-
Returns the hole form
License requirements: None.
- holeFreeEdgesToggle() - Method in interface nxopen.cae.MeshControlBuilder
-
Returns the hole free edges only filter toggle
License requirements: None.
- HoleGridOrientationData() - Constructor for class nxopen.die.SteelInsertBuilder.HoleGridOrientationData
-
- holeIndexColor() - Method in interface nxopen.tooling.HoleManufacturingNoteBuilder
-
Returns the hole index character color
License requirements: None.
- holeIndexSize() - Method in interface nxopen.tooling.HoleManufacturingNoteBuilder
-
Returns the hole index character size
License requirements: None.
- holeIndexTypeEnum() - Method in interface nxopen.tooling.HoleManufacturingNoteBuilder
-
Returns the hole index type enumeration
License requirements: None.
- holeList() - Method in interface nxopen.cam.GeometrySet
-
- holeList() - Method in interface nxopen.cam.HoleBossGeom
-
Returns the hole list
License requirements: None.
- HoleMachiningBuilder - Interface in nxopen.cam
-
Represents a HoleMachiningBuilder Builder
This is an abstract class and cannot be instantiated.
- HoleMachiningCutParameters - Interface in nxopen.cam
-
Represents a HoleMachiningCutParameters Builder
This is an abstract class and cannot be instantiated.
- HoleMaking - Interface in nxopen.cam
-
Represents a Hole Making operation
To create or edit an instance of this class, use
HoleMakingBuilder
Created in NX7.5.0
- HoleMakingBuilder - Interface in nxopen.cam
-
- HoleMakingBuilder.ControlPointTypes - Class in nxopen.cam
-
Available types for Control Point Type in Hole Making Operation
- HoleMakingBuilder.ModelDepthTypes - Class in nxopen.cam
-
Available types for model depth in Hole Making Operation
- HoleMakingBuilder.ToolAxisTypes - Class in nxopen.cam
-
the tool axis mode options
- holeManufacturingNote() - Method in interface nxopen.tooling.ToolingManager
-
Returns the HoleManufacturingNoteCollection instance belonging to this part .
- HoleManufacturingNoteBuilder - Interface in nxopen.tooling
-
- HoleManufacturingNoteBuilder.DefineByViewOrHoles - Class in nxopen.tooling
-
the view selection or window selection type
- HoleManufacturingNoteBuilder.HoleIndexType - Class in nxopen.tooling
-
the hole index type
- HoleManufacturingNoteCollection - Interface in nxopen.tooling
-
- holeManufacturingNoteColor() - Method in interface nxopen.tooling.HoleManufacturingNoteBuilder
-
Returns the manufaturing information character color
License requirements: None.
- holeManufacturingNoteOrigin() - Method in interface nxopen.tooling.HoleManufacturingNoteBuilder
-
Returns the manufacturing information origin
License requirements: None.
- holeManufacturingNoteSize() - Method in interface nxopen.tooling.HoleManufacturingNoteBuilder
-
Returns the manufaturing information character size
License requirements: None.
- holeManufacturingNoteStyle() - Method in interface nxopen.tooling.HoleManufacturingNoteBuilder
-
Returns the hole manufacturing note style
License requirements: None.
- holeMaxRadius() - Method in interface nxopen.cae.MeshControlBuilder
-
Returns the hole max radius
License requirements: None.
- holeMinRadius() - Method in interface nxopen.cae.MeshControlBuilder
-
Returns the hole min radius
License requirements: None.
- holename - Variable in class nxopen.uf.UFModl.ShapePatternClientDialogData
-
- HolePackage - Interface in nxopen.features
-
Represents a hole package and hole series feature
To create or edit an instance of this class, use
HolePackageBuilder
Created in NX5.0.2
- HolePackageBuilder - Interface in nxopen.features
-
- HolePackageBuilder.HoleDepthLimitOptions - Class in nxopen.features
-
Represents hole depth limit options.
- HolePackageBuilder.HoleForms - Class in nxopen.features
-
Represents hole form options.
- HolePackageBuilder.ThreadLengthOptions - Class in nxopen.features
-
Represents thread length options.
- HolePackageBuilder.ThreadRotationOptions - Class in nxopen.features
-
Represents thread rotation options.
- HolePackageBuilder.Types - Class in nxopen.features
-
Represents hole types.
- HoleParentBuilder - Interface in nxopen.die
-
Represents a Die Hole Parent sub feature.
- HoleParentBuilder.HoleAttributesData - Class in nxopen.die
-
- HoleParentBuilder.PadAttributesData - Class in nxopen.die
-
- holePinMatching() - Method in interface nxopen.cam.InspectionMeasDataBuilder
-
Returns the hole pin matching mode when adding measured data
License requirements: None.
- holePosition() - Method in interface nxopen.features.HolePackageBuilder
-
Returns the hole position
License requirements: None.
- holeRemovalMinModulus() - Method in interface nxopen.features.sheetmetal.MetaformBuilder
-
Returns the hole removal min modulus
License requirements: None.
- holeReport() - Method in interface nxopen.tooling.ToolingManager
-
Returns the HoleReport instance belonging to this part .
- HOLES - Static variable in class nxopen.tooling.HoleManufacturingNoteBuilder.DefineByViewOrHoles
-
- holeShape() - Method in interface nxopen.die.PierceItemBuilder
-
Returns the hole shape
License requirements: None.
- holeSubType() - Method in interface nxopen.features.shipdesign.PenetrationCutoutBuilder
-
Returns the hole sub-type
License requirements: None.
- holeSubType() - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder
-
Returns the hole sub-type
License requirements: None.
- holeTableContent() - Method in interface nxopen.annotations.TableEditSettingsBuilder
-
Returns the Hole table settings content builder
License requirements: None.
- holeTableContent() - Method in interface nxopen.annotations.TableStyleBuilder
-
Returns the Hole table settings content builder
License requirements: None.
- holeTableContent() - Method in interface nxopen.drafting.PreferencesBuilder
-
Returns the Hole table settings content builder
License requirements: None.
- holeTableFormat() - Method in interface nxopen.annotations.TableEditSettingsBuilder
-
Returns the Hole table settings format builder
License requirements: None.
- holeTableFormat() - Method in interface nxopen.annotations.TableStyleBuilder
-
Returns the Hole table settings format builder
License requirements: None.
- holeTableFormat() - Method in interface nxopen.drafting.PreferencesBuilder
-
Returns the Hole table settings format builder
License requirements: None.
- holeTableHoleFilters() - Method in interface nxopen.annotations.TableEditSettingsBuilder
-
Returns the Hole table settings hole filters builder
License requirements: None.
- holeTableHoleFilters() - Method in interface nxopen.annotations.TableStyleBuilder
-
Returns the Hole table settings hole filters builder
License requirements: None.
- holeTableHoleFilters() - Method in interface nxopen.drafting.PreferencesBuilder
-
Returns the Hole table settings hole filters builder
License requirements: None.
- holeTableLabel() - Method in interface nxopen.annotations.TableEditSettingsBuilder
-
Returns the Hole table settings label builder
License requirements: None.
- holeTableLabel() - Method in interface nxopen.annotations.TableStyleBuilder
-
Returns the Hole table settings label builder
License requirements: None.
- holeTableLabel() - Method in interface nxopen.drafting.PreferencesBuilder
-
Returns the Hole table settings label builder
License requirements: None.
- holeTables() - Method in interface nxopen.annotations.AnnotationManager
-
Hole Table collection .
- HoleTableSettingsContentBuilder - Interface in nxopen.annotations
-
- HoleTableSettingsContentBuilder.Content - Class in nxopen.annotations
-
Represents Content options
- HoleTableSettingsFormatBuilder - Interface in nxopen.annotations
-
- HoleTableSettingsFormatBuilder.DeletedHolesDisplayType - Class in nxopen.annotations
-
Represents Deleted Holes Display options
- HoleTableSettingsFormatBuilder.DepthMeasurementDatumType - Class in nxopen.annotations
-
Represents Depth Measurement Datum options
- HoleTableSettingsFormatBuilder.ShowColumnsType - Class in nxopen.annotations
-
Represents Show Columns options
- HoleTableSettingsFormatBuilder.SizeFormatType - Class in nxopen.annotations
-
Represents Size Format options
- HoleTableSettingsHoleFiltersBuilder - Interface in nxopen.annotations
-
- HoleTableSettingsHoleFiltersBuilder.ScopeType - Class in nxopen.annotations
-
the Scope enum
- HoleTableSettingsLabelBuilder - Interface in nxopen.annotations
-
- HoleTableSettingsLabelBuilder.IndexType - Class in nxopen.annotations
-
Represents Index Options
- HoleTableSettingsLabelBuilder.RelativeLocationType - Class in nxopen.annotations
-
Represents Relative Location Options
- HoleTableSettingsWorkflowBuilder - Interface in nxopen.annotations
-
- holeTableWorkflow() - Method in interface nxopen.annotations.TableEditSettingsBuilder
-
Returns the Hole table settings workflow builder
License requirements: None.
- holeTableWorkflow() - Method in interface nxopen.annotations.TableStyleBuilder
-
Returns the Hole table settings workflow builder
License requirements: None.
- holeTableWorkflow() - Method in interface nxopen.drafting.PreferencesBuilder
-
Returns the Hole table settings workflow builder
License requirements: None.
- holeType() - Method in interface nxopen.features.shipdesign.PenetrationCutoutBuilder
-
Returns the hole type
License requirements: None.
- holeType() - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder
-
Returns the hole type
License requirements: None.
- holeTypeEnum() - Method in interface nxopen.tooling.FaceColorManagementBuilder
-
Returns the hole type enumeration
License requirements: None.
- HOLLOW - Static variable in class nxopen.features.SectionInertiaAnalysisBuilder.PropertyType
-
Hollow analysis
- HOLLOW_CIRCLE - Static variable in class nxopen.uf.UFDisp.PolyMarker
-
- HOLLOW_CIRCLE - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- HOLLOW_REVOLVED_FEATURE - Static variable in class nxopen.uf.UFGdt.FeatureType
-
- HOLLOW_TORUS_FEATURE - Static variable in class nxopen.uf.UFGdt.FeatureType
-
- HOME_LOCATION - Static variable in class nxopen.cam.InspectionCmmCommandBuilder.MoveTypes
-
Specifies a move to the home location
- homeDir - Variable in class nxopen.uf.UFPlot.PrinterGroup
-
- homePageURL() - Method in interface nxopen.preferences.SessionUserInterfaceUI
-
Returns the home page URL
License requirements: None.
- homePtMethod() - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
Returns the home point method
License requirements: None.
- homePtPoint() - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
Returns the home point location
License requirements: None.
- HOMOGENEOUS - Static variable in class nxopen.cae.LaminatePly.SolidPropertyType
-
Extruded plies will use homogeneous property
- homogeneousPlies() - Method in interface nxopen.cae.LaminateExtrudeSetupBuilder
-
Returns the option to (de)activate homogeneous ply meshes
License requirements: None.
- homogeneousPlies() - Method in interface nxopen.cae.LaminateFillSetupBuilder
-
Returns the option to (de)activate homogeneous ply meshes
License requirements: None.
- hood() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the collector containing the faces of the active hood.
- HoodVisibility - Interface in nxopen.features.vehicledesign
-
Represents a hood visibility spline feature
To create or edit an instance of this class, use
HoodVisibilityBuilder
Created in NX6.0.0
- HoodVisibilityBuilder - Interface in nxopen.features.vehicledesign
-
Represents a
HoodVisibility
builder
To create a new instance of this class, use
nxopen.features.vehicledesignCollection#createHoodVisibilityBuilder
Default values.
- Hookes - Class in nxopen.cae.optimization
-
- hookupRegionUdoAndBodyForCavityAndCore() - Method in interface nxopen.tooling.MWDefineRegionsBuilder
-
Hook up cavity and core region UDO objects with the corresponding sheet bodies
License requirements: None.
- horizAlignmentPosition - Variable in class nxopen.uf.UFDrf.AssociativeOrigin
-
- horizAnnotation - Variable in class nxopen.uf.UFDrf.AssociativeOrigin
-
- horizJust - Variable in class nxopen.uf.UFDraw.TabnotCellParams
-
- horizJust - Variable in class nxopen.uf.UFTabnot.CellPrefs
-
- HORIZONTAL - Static variable in class nxopen.annotations.ChamferOrientationType
-
default (same as the adjacent edge)
- HORIZONTAL - Static variable in class nxopen.annotations.DimensionMeasurementBuilder.MeasurementMethod
-
Horizontal measurement direction
- HORIZONTAL - Static variable in class nxopen.annotations.DimensionType
-
Horizontal dimension
- HORIZONTAL - Static variable in class nxopen.annotations.FlipOption
-
Flips a symbol horizontally about a vertical
line taken through its anchor point
- HORIZONTAL - Static variable in class nxopen.annotations.NarrowTextOrientation
-
Specifies horizontal text orientation
- HORIZONTAL - Static variable in class nxopen.annotations.TextOrientation
-
Specifies horizontal dimension text
- HORIZONTAL - Static variable in class nxopen.AxisOrientation
-
- HORIZONTAL - Static variable in class nxopen.cae.BeamEADBuilder.VectorChoiceType
-
the vector is defined to be horizontal
- HORIZONTAL - Static variable in class nxopen.cae.BeamSection.DirectionOption
-
Indicates the horizontal direction of beam section
- HORIZONTAL - Static variable in class nxopen.cae.xyplot.TextOrientation
-
Horizontal text orientation
- HORIZONTAL - Static variable in class nxopen.display.ImageBaseBuilder.ReferenceDirection
-
horizontal reference direction
- HORIZONTAL - Static variable in class nxopen.drawings.ViewPlacementBuilder.Method
-
Align the view horizontally to another view
- HORIZONTAL - Static variable in class nxopen.features.shipdesign.StiffenerBySupportPathBuilder.Method
-
Horizontal
- HORIZONTAL - Static variable in class nxopen.features.vehicledesign.DynamicCurbBuilder.MethodType
-
- horizontal() - Method in interface nxopen.InferredConstraintsBuilder
-
Returns the horizontal infer-constraint setting.
- HORIZONTAL - Static variable in class nxopen.PositioningDimension.Subtype
-
Horizontal dimension
- HORIZONTAL - Static variable in class nxopen.routing.PlatformCreatorBuilder.ReferenceType
-
- HORIZONTAL - Static variable in class nxopen.Sketch.ConstraintType
-
- horizontal() - Method in interface nxopen.SketchAutoConstrainBuilder
-
Returns the horizontal
License requirements: None.
- HORIZONTAL - Static variable in class nxopen.SketchConstraintBuilder.Constraint
-
- HORIZONTAL - Static variable in class nxopen.tooling.AutoDimensionBuilder.TextOrientationType
-
- HORIZONTAL - Static variable in class nxopen.uf.UFSket.ConType
-
- HORIZONTAL_CENTERLINE1 - Static variable in class nxopen.features.AssociativityType
-
horizontal centerline end point 1
- HORIZONTAL_CENTERLINE1 - Static variable in class nxopen.features.RPOBuilder.AssociativityType
-
horizontal centerline end point 1
- HORIZONTAL_CENTERLINE2 - Static variable in class nxopen.features.AssociativityType
-
horizontal centerline end point 2
- HORIZONTAL_CENTERLINE2 - Static variable in class nxopen.features.RPOBuilder.AssociativityType
-
horizontal centerline end point 2
- HORIZONTAL_DIM - Static variable in class nxopen.Sketch.ConstraintType
-
- HORIZONTAL_DIM - Static variable in class nxopen.uf.UFSket.ConType
-
- HORIZONTAL_DISTANCE_BY_POSITION - Static variable in class nxopen.annotations.OffsetCenterPointBuilder.Offset
-
horizontal distance by position, applicable only for creation
- HORIZONTAL_DISTANCE_FROM_ARC - Static variable in class nxopen.annotations.OffsetCenterPointBuilder.Offset
-
horizontal distance from arc
- HORIZONTAL_DISTANCE_FROM_CENTER - Static variable in class nxopen.annotations.OffsetCenterPointBuilder.Offset
-
horizontal distance from center
- HORIZONTAL_LEFT - Static variable in class nxopen.annotations.AssociativityLineOption
-
Horizontal left
- HORIZONTAL_LEFT_LINE_TYPE - Static variable in class nxopen.uf.UFDrf.ObjectAssocLineType
-
- HORIZONTAL_LINE - Static variable in class nxopen.features.vehicledesign.GroundClearanceBuilder.SectionCurveType
-
- HORIZONTAL_RIGHT - Static variable in class nxopen.annotations.AssociativityLineOption
-
Horizontal right
- HORIZONTAL_RIGHT_LINE_TYPE - Static variable in class nxopen.uf.UFDrf.ObjectAssocLineType
-
- HORIZONTAL_VERTICAL - Static variable in class nxopen.Sketch.AutoDimensioningRule
-
Create Horizontal and Vertical Dimensions
- horizontalAngle() - Method in interface nxopen.features.vehicledesign.WindshieldDatumBuilder
-
Returns the horizontal inclined angle.
- horizontalCenteringMark() - Method in interface nxopen.drawings.BordersAndZonesBuilder
-
- HorizontalCenteringMarkType - Class in nxopen.drawings
-
the horizontal centering mark type
- HorizontalDimension - Interface in nxopen.annotations
-
Represents a horizontal dimension
To create or edit an instance of this class, use
LinearDimensionBuilder
Created in NX4.0.0
- horizontalDirection() - Method in interface nxopen.features.shipdesign.PenetrationCutoutBuilder
-
Returns the horizontal direction
License requirements: None.
- horizontalDirection() - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder
-
Returns the horizontal direction
License requirements: None.
- horizontalFlip() - Method in interface nxopen.annotations.BaseCustomSymbolBuilder
-
Returns the horizontal flip
License requirements: None.
- horizontalGrowthDirection() - Method in interface nxopen.drawings.DrawingRegionBuilder
-
Returns the horizantal growth direction
License requirements: None.
- horizontalInferredMarginLocation() - Method in interface nxopen.annotations.BaseOrdinateDimensionBuilder
-
Returns the horizontal inferred margin location
License requirements: None.
- horizontalLeftMax() - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder
-
Returns the left horizontal maximum required approach angle calculated value.
- horizontalLeftMax() - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder
-
Returns the left horizontal maximum required approach angle calculated value.
- horizontalLeftMin() - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder
-
Returns the left horizontal minimum required approach angle calculated value.
- horizontalLeftMin() - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder
-
Returns the left horizontal minimum required approach angle calculated value.
- horizontalLength() - Method in interface nxopen.features.vehicledesign.CloseRangeCameraListItemBuilder
-
Returns the expression containing the value for the horizontal legth.
- horizontalLimitBuilder() - Method in interface nxopen.cam.StepoverBuilder
-
Returns the horizontal limit (inheritable tool dependent)
License requirements: None.
- HORIZONTALLY - Static variable in class nxopen.display.CameraBuilder.FovMeasured
-
Horizontal
- HORIZONTALLY_ALIGNED - Static variable in class nxopen.annotations.AssociativeOriginType
-
- HorizontalOrdinateDimension - Interface in nxopen.annotations
-
Represents a horizontal ordinate dimension
To create or edit an instance of this class, use
OrdinateDimensionBuilder
Created in NX4.0.0
- HorizontalOrdinateMargin - Interface in nxopen.annotations
-
Represents a horizontal ordinate margin .
- horizontalPointTravel() - Method in interface nxopen.features.vehicledesign.BaseDataDriverBuilder
-
Returns the horizontal seat adjustment in the direction of the x axis.
- horizontalPointTravelExp() - Method in interface nxopen.features.vehicledesign.BaseDataPassengerBuilder
-
Returns the passenger's horizontal adjustment in x direction.
- horizontalRef() - Method in interface nxopen.geometricutilities.CircularPattern
-
Returns the horizontal reference
License requirements: None.
- horizontalRef() - Method in interface nxopen.geometricutilities.PolygonPattern
-
Returns the horizontal reference
License requirements: None.
- horizontalRef() - Method in interface nxopen.geometricutilities.RectangularPattern
-
Returns the horizontal reference
License requirements: None.
- horizontalRef() - Method in interface nxopen.geometricutilities.SpiralPattern
-
Returns the horizontal reference
License requirements: None.
- horizontalReference() - Method in interface nxopen.features.shipdesign.Cutout2Builder
-
Returns the horizontal reference (optional, used only for Faces2Surfaces, FacesBetweenSurfacesSurface, and FacesCentered)
License requirements: None.
- HorizontalReference - Interface in nxopen.geometricutilities
-
the horizontal reference vector definition.
- horizontalRefObject() - Method in interface nxopen.geometricutilities.HorizontalReference
-
Returns the direction object.
- horizontalRefVector() - Method in interface nxopen.geometricutilities.HorizontalReference
-
Returns the horizontal reference vector
License requirements: None.
- horizontalRightMax() - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder
-
Returns the right horizontal maximum required approach angle calculated value.
- horizontalRightMax() - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder
-
Returns the right horizontal maximum required approach angle calculated value.
- horizontalRightMin() - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder
-
Returns the right horizontal minimum required approach angle calculated value.
- horizontalRightMin() - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder
-
Returns the right horizontal minimum required approach angle calculated value.
- horizontalSize() - Method in interface nxopen.drawings.BordersAndZonesBuilder
-
- horizontalSize() - Method in interface nxopen.drawings.SheetZoneSettingsBuilder
-
Returns the horizontal size
License requirements: None.
- horizontalTextJustification() - Method in interface nxopen.annotations.LetteringStyleBuilder
-
Returns the horizontal text justification
License requirements: None.
- horizTextJust() - Method in interface nxopen.annotations.LetteringPreferences
-
Returns the horizontal text justification
License requirements: None.
- horizTextJust - Variable in class nxopen.uf.UFDrf.LetteringPreferences
-
- HOSE_COUPLING - Static variable in class nxopen.cam.fbm.ThreadFeatureGeometry.Form
-
Form: Hose Coupling
- HOSE_COUPLING - Static variable in class nxopen.cam.HoleBossGeom.FormTypes
-
Form: Hose Coupling
- HOSECOUPLING - Static variable in class nxopen.cam.DrillThreadMillToolBuilder.ToolFormTypeTypes
-
Hose Coupling
- HOST_POINTER - Static variable in class nxopen.RuleManager.RuleType
-
- hostName() - Method in interface nxopen.mechatronics.OPCClientBuilder
-
Returns the host name.
- hotSpot() - Method in interface nxopen.annotations.LocatorDesignatorBuilder
-
Returns the hot spot
License requirements: None.
- hotSpotText() - Method in interface nxopen.annotations.LocatorDesignatorBuilder
-
Returns the hot spot text
License requirements: None.
- hour - Variable in class nxopen.uf.UFPs.KernelVersion
-
- howFar - Variable in class nxopen.uf.UFModeling.AskAngleEdgeData
-
- howFar - Variable in class nxopen.uf.UFModeling.AskHorzDimeData
-
- howFar - Variable in class nxopen.uf.UFModeling.AskParaDistData
-
- howFar - Variable in class nxopen.uf.UFModeling.AskParaEdgeData
-
- howFar - Variable in class nxopen.uf.UFModeling.AskPerpDistData
-
- howFar - Variable in class nxopen.uf.UFModeling.AskVertDimeData
-
- HPOINT - Static variable in class nxopen.HumanData.ReferencePointType
-
Indicate reference point at the H-point
- HUB_FINISH - Static variable in class nxopen.cam.SurfaceContourBuilder.DriveMethodTypes
-
Hub Finish
- hubColor() - Method in interface nxopen.cam.Preferences
-
Returns the hub color
License requirements: None.
- hubExtensions() - Method in interface nxopen.cam.BladeCutLevels
-
Returns the hub extensions
License requirements: None.
- HubFinish - Interface in nxopen.cam
-
Represents a Hub Finish Drive Method Builder .
- hubFinish() - Method in interface nxopen.cam.SurfaceContourBuilder
-
Returns the Hub Finish Drive Method builder
License requirements: None.
- hubGeometry() - Method in interface nxopen.cam.GeometryCiBuilder
-
Returns the hub geometry
License requirements: cam_base ("CAM BASE")
.
- hubStock() - Method in interface nxopen.cam.MillCutParameters
-
Returns the hub stock
License requirements: None.
- hue - Variable in class nxopen.preferences.ViewVisualizationSpecialEffects.ColorHLS
-
Hue in HSV pattern is the color type (such as red, blue, or yellow) Ranges from 0-360
- hue - Variable in class nxopen.preferences.ViewVisualizationSpecialEffects.ColorHSV
-
Hue in HSV pattern is the color type (such as red, blue, or yellow) Ranges from 0-360
- HULL - Static variable in class nxopen.cae.responsesimulation.DDAMExcitation.MountingType
-
- hull() - Method in interface nxopen.features.shipdesign.DeckBuilder
-
Returns the sheet body that defines the hull shape.
- Hull - Interface in nxopen.features.shipdesign
-
Represents a Hull feature.
- HULL - Static variable in class nxopen.features.shipdesign.ShipDesignPreferencesBuilder.Types
-
Hull type
- HULL - Static variable in class nxopen.features.shipdesign.ShipnamesBuilderType
-
- HullBuilder - Interface in nxopen.features.shipdesign
-
This class is used to create or edit a
Hull
feature.
- HullBuilder.Types - Class in nxopen.features.shipdesign
-
Indicates the method that is being used to define the mold face of the hull.
- Human - Interface in nxopen.features
-
Represents a human feature.
- human() - Method in interface nxopen.HumanPosturePredictionBuilder
-
Returns the human for posture prediction
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- human - Variable in class nxopen.HumanReachZone.Data
-
Human feature
- Human.CreateReachZoneData - Class in nxopen.features
-
- HumanBuilder - Interface in nxopen.features
-
Represents a human feature.
- HumanBuilder.StatureData - Class in nxopen.features
-
- HumanBuilder.WeightData - Class in nxopen.features
-
- HumanData - Interface in nxopen
-
Represent the data used to create the human .
- HumanData.AdvancedScalingType - Class in nxopen
-
This enum represents the types of the advanced scaling variable names
- HumanData.DatabaseType - Class in nxopen
-
This enum represents the database used for human creation
- HumanData.EditDisplayBodyParts - Class in nxopen
-
This enum represents the body parts of edit human display
- HumanData.GenderType - Class in nxopen
-
This enum represents the gender of human
- HumanData.HandFootType - Class in nxopen
-
This enum represents the types of human hand foot
- HumanData.HandGoalType - Class in nxopen
-
This enum represents the type to define hand goal position
- HumanData.InverseKinematicsBalanceType - Class in nxopen
-
This enum represents the balance type of active reach
- HumanData.InverseKinematicsBodyParts - Class in nxopen
-
This enum represents the body parts of dynamic drag
- HumanData.InverseKinematicsHeadEyeType - Class in nxopen
-
This enum represents the head and eye type of active reach
- HumanData.InverseKinematicsInitJoint - Class in nxopen
-
This enum represents the motion initiation joint of hand dynamic drag
- HumanData.InverseKinematicsType - Class in nxopen
-
This enum represents the types of inverse kinematics
- HumanData.JointType - Class in nxopen
-
This enum represents the types of the joint names
- HumanData.ReferencePointType - Class in nxopen
-
This enum represents the location of the reference point
- HumanData.SegmentScalingType - Class in nxopen
-
This enum represents the types of the segment scaling variable names
- HumanData.SideType - Class in nxopen
-
This enum represents the types of human side
- HumanData.StatureType - Class in nxopen
-
This enum represents the stature data type of human
- HumanData.StatureUnitType - Class in nxopen
-
This enum represents the unit for stature
- HumanData.WeightType - Class in nxopen
-
This enum represents the weight data type of human
- HumanData.WeightUnitType - Class in nxopen
-
This enum represents the unit for weight
- HumanData.XformData - Class in nxopen
-
- HumanHandShapeData - Interface in nxopen
-
Represent hand shape data .
- HumanHandShapeData.HandOpt - Class in nxopen
-
This enum represents the hand shape data type of human
- HumanPosturePrediction - Interface in nxopen
-
- HumanPosturePredictionBuilder - Interface in nxopen
-
Represents a Human Posture Prediction Builder.
- HumanPosturePredictionBuilder.ComputeHandCsysData - Class in nxopen
-
- HumanPosturePredictionBuilder.CushionFirmnessType - Class in nxopen
-
Represents the cushion firmness type
- HumanPosturePredictionBuilder.HandDataSaeData - Class in nxopen
-
- HumanPosturePredictionBuilder.HandFootCsysData - Class in nxopen
-
- HumanPosturePredictionBuilder.OccupantType - Class in nxopen
-
Represents the occupant type.
- HumanPosturePredictionBuilder.PredictionMethodType - Class in nxopen
-
Represents the predition method type.
- HumanPosturePredictionBuilder.SeatType - Class in nxopen
-
Represents the seat type
- HumanPosturePredictionBuilder.SgrpCoordinatesData - Class in nxopen
-
- HumanPosturePredictionBuilder.SteeringWheelPedalType - Class in nxopen
-
This enum represents the steering wheel or pedal type, if there is no steering wheel or pedal, use csys as steering
wheel and pedal type
- HumanPosturePredictionBuilder.TransmissionType - Class in nxopen
-
Represents the transmission type
- HumanPosturePredictionBuilder.VehicleType - Class in nxopen
-
Represents the vehicle type.
- HumanReachZone - Interface in nxopen
-
Represents a human reach zone.
- HumanReachZone.Data - Class in nxopen
-
- HumanReachZone.MethodType - Class in nxopen
-
This enum represents the methods for computing the reach zone
- humidityPlaces() - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
Returns the humidity decimal places
License requirements: None.
- HUNDRED - Static variable in class nxopen.cam.RoundPointBuilder.Output
-
nearest hundred
- HUNDRED_THOUSANDTH - Static variable in class nxopen.cam.RoundPointBuilder.Output
-
nearest hundred thousandth
- HUNDREDTH - Static variable in class nxopen.cam.RoundPointBuilder.Output
-
nearest hundredth
- HYBRID_RADIOSITY - Static variable in class nxopen.ModelingViewHighQualityImage.ShadeMethod
-
Uses standard rendering techniques to calculate direct lighting
together with radiosity processing for indirect lighting for
image rendering.
- HYDRAULIC - Static variable in class nxopen.die.ClampingSlotBuilder.Types
-
- Hyperbola - Interface in nxopen
-
Represents a hyperbola curve.
- Hyperbola() - Constructor for class nxopen.uf.UFEval.Hyperbola
-
- Hyperbola(double[], double, double, double[], double[], double[]) - Constructor for class nxopen.uf.UFEval.Hyperbola
-
- HYPERBOLA_GEOM - Static variable in class nxopen.uf.UFBrep.GeomType
-
- HyperbolaCollection - Interface in nxopen
-
Represents a collection of hyperbolas.
- hyperbolas() - Method in interface nxopen.BasePart
-
Returns the HyperbolaCollection instance belonging to this part .
- hypermatrixBufferSize() - Method in interface nxopen.cae.responsesimulation.EvaluationParameters
-
Returns the buffer allocated for Hypermatrix files
License requirements: nx_response_anlys ("NX Response Analysis")
.
- hysteretic() - Method in interface nxopen.cae.responsesimulation.NormalMode
-
Returns the hysteretic factor
License requirements: nx_response_anlys ("NX Response Analysis")
.
- hysteretic() - Method in interface nxopen.motion.NormalModeProperty
-
Returns the hysteretic factor
License requirements: mechanisms ("MECHANISMS")
.
- HZ - Static variable in class nxopen.cae.LaminateSineEventBuilder.AdditionalFrequeciesUnitsEnum
-