Represents a MeshCollector
For more information, refer to the Solver language documentation
in the
meshCollector() - Method in interface nxopen.cae.
NodeElementInfoBuilder
Returns the mesh collector
License requirements: None.
MeshCollectorBuilder - Interface in nxopen.cae
MeshCollectorBuilder.ElementDimensionOption - Class in nxopen.cae
Indicates the different element dimensions
MeshCollectorDisplayDefaults - Interface in nxopen.cae
Represents the base MeshCollectorDisplayDefaults class for Mesh, MeshCollector and
MeshCollectorOccurrence classes
This is an abstract class, and cannot be created.
MeshCollectorDisplayDefaults0d - Interface in nxopen.cae
Represents 0d Mesh Display Settings
To obtain an instance of this class use
CAE::MeshCollector, or CAE::MeshCollectorOccurrence classes
.
MeshCollectorDisplayDefaults1d - Interface in nxopen.cae
Represents 1d Mesh Display Settings
To obtain an instance of this class use
CAE::MeshCollector, or CAE::MeshCollectorOccurrence classes
.
MeshCollectorDisplayDefaults2d - Interface in nxopen.cae
Represents 2d Mesh Display Settings
To obtain an instance of this class use
CAE::MeshCollector, or CAE::MeshCollectorOccurrence classes
.
MeshCollectorDisplayDefaults3d - Interface in nxopen.cae
Represents 3d Mesh Display Settings
To obtain an instance of this class use
CAE::MeshCollector, or CAE::MeshCollectorOccurrence classes
.
meshCollectorName() - Method in interface nxopen.cae.ElementModifyTypeBuilder
Returns the mesh collector name
License requirements: None.
meshCollectorName() - Method in interface nxopen.cae.ElementTranslateBuilder
Returns the name of the mesh collector which will hold the new elements
License requirements: None.
MeshCollectorOccurrence - Interface in nxopen.cae
MeshCollectorOccurrenceBuilder - Interface in nxopen.cae
meshContext() - Method in interface nxopen.cae.ThicknessBuilder
Returns the mesh in context
License requirements: None.
MeshControl - Interface in nxopen.cae
Represents a MeshControl
To create or edit an instance of this class, use
MeshControlBuilder
Created in NX5.0.0
MeshControlBuilder - Interface in nxopen.cae
MeshControlBuilder.CylinderAxialElementSizeType - Class in nxopen.cae
the cylinder subtypes for size on axial direction.
MeshControlBuilder.CylinderCircularSizeType - Class in nxopen.cae
the cylinder subtypes for size on circumference.
MeshControlBuilder.FilletAxialElementSizeType - Class in nxopen.cae
the fillet subtypes for size on axial direction.
MeshControlBuilder.FilletCircumferenceSizeType - Class in nxopen.cae
the fillet subtypes for size on circumference.
MeshControlBuilder.FilletType - Class in nxopen.cae
the fillet subtypes.
MeshControlBuilder.HeightDefinedByOption - Class in nxopen.cae
the height defined by options.
MeshControlBuilder.ProgressionTypes - Class in nxopen.cae
the mesh control progression subtypes.
MeshControlBuilder.SizeTypes - Class in nxopen.cae
the mesh control size subtypes.
MeshControlBuilder.SizingType - Class in nxopen.cae
the sizing subtypes for weld row and mapped holes.
MeshControlBuilder.Types - Class in nxopen.cae
the mesh control types
MeshControlBuilder.WeldSide - Class in nxopen.cae
the mesh control weld row direction subtypes.
MeshControlCollection - Interface in nxopen.cae
Provides methods for managing mesh controls
MeshControl
in a fem part
To obtain an instance of this class, refer to
BaseFEModel
Created in NX5.0.0
MeshControlDisplayManager - Interface in nxopen.cae
Provides method for creating builder for
mesh control display operation commands in both sim and fem part
To obtain an instance of this class, refer to
CaePart
Created in NX5.0.0
meshControlDisplayMgr() - Method in interface nxopen.cae.CaePart
Returns the mesh control display manager belonging to this IFem .
MeshControlDisplayOptionsBuilder - Interface in nxopen.cae
meshControls() - Method in interface nxopen.cae.BaseFEModel
Returns the mesh control collection belonging to this fem part .
meshCount - Variable in class nxopen.uf.UFSf.LocateAllMeshesData
MeshDisplaySettings - Interface in nxopen.cae
Represents the base MeshDisplaySettings class for Mesh class
This is an abstract class, and cannot be created.
MeshDisplaySettings0d - Interface in nxopen.cae
Represents 0d Mesh Display Settings
To obtain an instance of this class use CAE::Mesh,
CAE::MeshCollector, or CAE::MeshCollectorOccurrence classes
.
MeshDisplaySettings1d - Interface in nxopen.cae
Represents 1d Mesh Display Settings
To obtain an instance of this class use CAE::Mesh,
CAE::MeshCollector, or CAE::MeshCollectorOccurrence classes
.
MeshDisplaySettings2d - Interface in nxopen.cae
Represents 2d Mesh Display Settings
To obtain an instance of this class use CAE::Mesh,
CAE::MeshCollector, or CAE::MeshCollectorOccurrence classes
.
MeshDisplaySettings3d - Interface in nxopen.cae
Represents 3d Mesh Display Settings
To obtain an instance of this class use CAE::Mesh,
CAE::MeshCollector, or CAE::MeshCollectorOccurrence classes
.
MESHED_POLYGON_BODIES - Static variable in class nxopen.DisplayManager.ShowHideType
Show or hide meshed polygon bodies
meshElementSize() - Method in interface nxopen.bodydes.OnestepUnformBuilder
Returns the 2-D element size for mesh.
meshElementSize() - Method in interface nxopen.die.TrimLineDevelopmentBuilder
Returns the 2-D element size for mesh.
meshElementType() - Method in interface nxopen.bodydes.OnestepUnformBuilder
Returns the 2-D mesh element type, either triangle or quadrate element.
meshElementType() - Method in interface nxopen.die.TrimLineDevelopmentBuilder
Returns the 2-D mesh element type, either triangle or quadrate element.
MeshError() - Constructor for class nxopen.uf.UFSf.MeshError
MeshError(Tag, UFSf.MeshErrorType) - Constructor for class nxopen.uf.UFSf.MeshError
MeshErrorContainer() - Constructor for class nxopen.uf.UFSf.MeshErrorContainer
MeshErrorContainer(UFSf.MeshErrorList, UFSf.MeshErrorList, UFSf.MeshErrorList, UFSf.MeshErrorList, UFSf.MeshErrorList, UFSf.MeshErrorList) - Constructor for class nxopen.uf.UFSf.MeshErrorContainer
MeshErrorList() - Constructor for class nxopen.uf.UFSf.MeshErrorList
MeshErrorList(int, UFSf.MeshError) - Constructor for class nxopen.uf.UFSf.MeshErrorList
meshErrors - Variable in class nxopen.uf.UFSf.MeshErrorList
MESHES - Static variable in class nxopen.DisplayManager.ShowHideType
Show or hide all mesh types
MeshesData() - Constructor for class nxopen.bodydes.OnestepUnformBuilder.MeshesData
MeshFollower - Interface in nxopen.cae
Represents Mesh Recipe
This is an abstract class
.
MeshFromBoundaryBuilder - Interface in nxopen.cae
MeshFromBoundaryBuilder.LoopOption - Class in nxopen.cae
Type of loop
MeshFromBoundaryBuilder.RailOption - Class in nxopen.cae
Type of rail
meshItemsP - Variable in class nxopen.uf.UFSf.FindMeshData
meshManager() - Method in interface nxopen.cae.IFEModel
Returns the IMeshManager
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
MeshManager - Interface in nxopen.cae
Creates Meshes
Mesh
in a fem part
Created in NX6.0.0
MeshManagerOccurrence - Interface in nxopen.cae
Manages MeshOccurrencs and MeshCollectorOccurrences in a fem part
.
MeshManualSweepBetweenListItemSelection - Interface in nxopen.cae
MeshManualSweepBetweenListItemSelectionList - Interface in nxopen.cae
Represents a list of objects.
MeshMate - Interface in nxopen.cae
Represents a Mesh Mate
.
meshMateSize() - Method in interface nxopen.cae.MeshControlDisplayOptionsBuilder
Returns the mesh mate size
License requirements: None.
meshMatingOption() - Method in interface nxopen.cae.MMCCreateBuilder
Returns the mesh mating type
License requirements: None.
meshMaxJacobian() - Method in interface nxopen.bodydes.OnestepUnformBuilder
Returns the maximum Jacobian for mesh elements.
meshMaxJacobian() - Method in interface nxopen.die.TrimLineDevelopmentBuilder
Returns the maximum Jacobian for mesh elements.
meshMaxWarp() - Method in interface nxopen.bodydes.OnestepUnformBuilder
Returns the maximum warp for meshing.
meshMaxWarp() - Method in interface nxopen.die.TrimLineDevelopmentBuilder
Returns the maximum warp for meshing.
meshMethod - Variable in class nxopen.uf.UFSf.Ugs2dMeshParms
meshName() - Method in interface nxopen.cae.ElementCreateBuilder
Returns the mesh name
License requirements: None.
meshName() - Method in interface nxopen.cae.ElementExtrudeBuilder
Returns the mesh name
License requirements: None.
meshName() - Method in interface nxopen.cae.ElementProjectBuilder
Returns the mesh name
License requirements: None.
meshName() - Method in interface nxopen.cae.ElementReflectBuilder
Returns the mesh name
License requirements: None.
meshName() - Method in interface nxopen.cae.ElementRevolveBuilder
Returns the mesh name
License requirements: None.
meshName() - Method in interface nxopen.cae.ElementTranslateBuilder
Returns the name of the mesh that will hold the new elements
License requirements: None.
meshName() - Method in interface nxopen.cae.SpiderElementBuilder
Returns the mesh name
License requirements: None.
meshObject() - Method in interface nxopen.tooling.LsdynaKfileGeneratorBuilder
Meshes the part.
meshOption - Variable in class nxopen.uf.UFSf.EfConnInfo
MeshParameterData - Interface in nxopen
Represents surface rebuild data structure.
MeshParameterData.FeatureType - Class in nxopen
Mesh surface feature types.
MeshParameterData.Type - Class in nxopen
Mesh parameters.
MeshPoint - Interface in nxopen.cae
MeshPointCollection - Interface in nxopen.cae
Provides methods for managing constraints
MeshPoint
in a sim part.
MeshPointConicCenterBuilder - Interface in nxopen.cae
meshPointer - Variable in class nxopen.uf.UFSf.LocateAllMeshesData
MeshPointExistingPointBuilder - Interface in nxopen.cae
MeshPointMultipleOnCurveBuilder - Interface in nxopen.cae
MeshPointMultipleOnCurveBuilder.PlacementType - Class in nxopen.cae
the placement type types
MeshPointOnCurveBuilder - Interface in nxopen.cae
MeshPointOnFaceBuilder - Interface in nxopen.cae
MeshPointProjectBuilder - Interface in nxopen.cae
meshPoints() - Method in interface nxopen.cae.FemPart
Returns the meshpoint collector collection belonging to the part .
MeshPreferencesData() - Constructor for class nxopen.cae.FemPart.MeshPreferencesData
meshProcessFillet() - Method in interface nxopen.bodydes.OnestepUnformBuilder
Returns the option to process fillet for mesh element.
meshProcessFillet() - Method in interface nxopen.die.TrimLineDevelopmentBuilder
Returns the option to process fillet for mesh element.
MeshProfileString - Interface in nxopen
MeshProfileString.InsertOrder - Class in nxopen
Profile string insert orders.
MeshProfileString.SelectedPoint - Class in nxopen
Mesh surface profile string point types.
MeshProfileString.Type - Class in nxopen
Mesh surface profile string types.
meshRecipeErrorList - Variable in class nxopen.uf.UFSf.MeshErrorContainer
meshRecipes - Variable in class nxopen.uf.UFSf.AutoCreateSurfaceContactMeshData
meshSelection() - Method in interface nxopen.cae.ElementModifyOrderBuilder
Returns the selected mesh(es)
License requirements: None.
meshSelection() - Method in interface nxopen.cae.ElementModifyTypeBuilder
Returns the selected meshes
License requirements: None.
meshSelection() - Method in interface nxopen.cae.NodeAssociationBuilder
Returns the selected mesh
License requirements: None.
MeshShellFromSolid - Interface in nxopen.cae
Represents 2d Mesh that follows 3d mesh
To create or edit an instance of this class, use
SurfaceCoatBuilder
Created in NX7.5.0
meshSizeVariation() - Method in interface nxopen.bodydes.OnestepUnformBuilder
Returns the variation of mesh element size.
meshSizeVariation() - Method in interface nxopen.cae.Shell2SolidBuilder
Returns the mesh size variation
License requirements: nx_masterfem ("Finite Element Modeling")
.
meshSizeVariation() - Method in interface nxopen.die.TrimLineDevelopmentBuilder
Returns the variation of mesh element size.
meshSmallFeature() - Method in interface nxopen.bodydes.OnestepUnformBuilder
Returns the value of small feature for mesh setting
License requirements: None.
meshSmallFeature() - Method in interface nxopen.die.TrimLineDevelopmentBuilder
Returns the value of small feature for mesh setting
License requirements: None.
meshSmooth() - Method in interface nxopen.cae.optimization.TBSShapeOptimizationSolution
Returns the mesh smooth definition
License requirements: None.
meshSmoothElements() - Method in interface nxopen.cae.optimization.TBSMeshSmooth
Returns the elements of mesh smooth
License requirements: None.
meshSmoothStrategy() - Method in interface nxopen.cae.optimization.TBSMeshSmooth
Returns the strategy of mesh smooth
License requirements: None.
meshSplitQuad() - Method in interface nxopen.bodydes.OnestepUnformBuilder
Returns the option to split quadrate element to triangle element when creating meshes.
meshSplitQuad() - Method in interface nxopen.die.TrimLineDevelopmentBuilder
Returns the option to split quadrate element to triangle element when creating meshes.
MeshSurface - Interface in nxopen.features
Represents a mesh surface feature.
MeshSurfaceBuilder - Interface in nxopen.features
Mesh Surface Builder class.
MeshSurfaceBuilder.AngleAlignmentPointsData - Class in nxopen.features
MeshSurfaceBuilder.ConstraintDirection - Class in nxopen.features
End face constraints direction.
MeshSurfaceBuilder.ConstraintType - Class in nxopen.features
End face constraints types.
MeshSurfaceBuilder.FaceConstraintCollectorsData - Class in nxopen.features
MeshSurfaceBuilder.ProfilePointAlignmentData - Class in nxopen.features
meshTopologyOption() - Method in interface nxopen.features.MeshTransformerBuilder
Returns the option for setting the mesh topology used in the transformation or morphing calculations
License requirements: None.
MeshTransformer - Interface in nxopen.features
Represents a mesh transformer feature
To create or edit an instance of this class, use
MeshTransformerBuilder
Created in NX10.0.0
MeshTransformerBuilder - Interface in nxopen.features
MeshTransformerBuilder.ContinuityType - Class in nxopen.features
Continuity type
MeshTransformerBuilder.MeshTopologyType - Class in nxopen.features
Mesh topology option type
MeshTransformerBuilder.SmoothingType - Class in nxopen.features
Smoothing option type
MeshTransformerBuilder.StepCountValue - Class in nxopen.features
Step count enum value for converting to actual count number
meshTransition - Variable in class nxopen.uf.UFSf.Ugs2dMeshParms
meshTransition - Variable in class nxopen.uf.UFSf.UgsTetMeshParms
MeshVisuals() - Constructor for class nxopen.uf.UFSf.MeshVisuals
MeshVisuals(int, int, int, int, int, int, int, int, int, int, int, double) - Constructor for class nxopen.uf.UFSf.MeshVisuals
message - Variable in class nxopen.uf.UFAssem.Prev16Align
message - Variable in class nxopen.uf.UFPlot.BannerOptions
message - Variable in class nxopen.uf.UFTurn.AskCutRegionOfIndexData
message - Variable in class nxopen.uf.UFTurn.AskCutRegionsExistData
message - Variable in class nxopen.uf.UFTurn.IpwBoxData
message - Variable in class nxopen.uf.UFTurn.TeachmodeCreateSubopData
MESSAGE_ERROR - Static variable in class nxopen.uf.UFUi.MessageDialogType
MESSAGE_INFORMATION - Static variable in class nxopen.uf.UFUi.MessageDialogType
MESSAGE_QUESTION - Static variable in class nxopen.uf.UFUi.MessageDialogType
MESSAGE_WARNING - Static variable in class nxopen.uf.UFUi.MessageDialogType
MessageButtons() - Constructor for class nxopen.uf.UFUi.MessageButtons
MessageButtons(boolean, boolean, boolean, String, String, String, int, int, int) - Constructor for class nxopen.uf.UFUi.MessageButtons
messageDialog(String, UFUi.MessageDialogType, String[], int, boolean, UFUi.MessageButtons) - Method in interface nxopen.uf.UFUi
messages - Variable in class nxopen.uf.UFAssem.ConvertPrev16AlignsData
messagesInconsistentRevisions() - Method in interface nxopen.preferences.SessionPdm
Returns the kind of messages about inconsistent revisions when a part is loaded
License requirements: None.
Metaform - Interface in nxopen.features
Represents a metaform feature
To create or edit an instance of this class, use
MetaformBuilder
Created in NX7.5.0
MetaformBuilder - Interface in nxopen.features.sheetmetal
METAL_BRUSHED1 - Static variable in class nxopen.display.TrueShadingBuilder.EnvironmentMapType
Brushed Metal Reflection 1
METAL_BRUSHED2 - Static variable in class nxopen.display.TrueShadingBuilder.EnvironmentMapType
Brushed Metal Reflection 2
METAL_MINIMUM_POINT_DATUM_DISTANCE - Static variable in class nxopen.weld.WeldAdvisorCheckerType
minimum point datum distance
METAL_MINIMUM_POINT_MEASUREMENT_DISTANCE - Static variable in class nxopen.weld.WeldAdvisorCheckerType
minimum point measurement distance
METAL_SHINY1 - Static variable in class nxopen.display.TrueShadingBuilder.EnvironmentMapType
Shiny Metal Reflection 1
METAL_SHINY2 - Static variable in class nxopen.display.TrueShadingBuilder.EnvironmentMapType
Shiny Metal Reflection 2
METAL_STACK_UP - Static variable in class nxopen.weld.WeldAdvisorCheckerType
metal stack up
METALS - Static variable in class nxopen.PhysicalMaterial.Category
Metals
metalThickness() - Method in interface nxopen.die.DrawBeadBuilder
Returns the expression containing the sheet metal thickness value.
metalThickness - Variable in class nxopen.uf.UFDie.AskMaterialPropertiesData
metaSolutionName() - Method in interface nxopen.cae.DurabilityMetaSolutionBuilder
Returns the meta solution name.
metaSolutions() - Method in interface nxopen.cae.DurabilityManager
Returns the durability metasolution collection belonging to this sim part.
METER - Static variable in class nxopen.uf.UFModl.Units
METER_NEWTON - Static variable in class nxopen.cae.FreeBodyResultsBuilder.OutputUnits
Load unit = "N", Moment unit N-m
METER_NEWTON - Static variable in class nxopen.cae.MechanicalLoadSumBuilder.UserUnit
Load unit = "N", Moment unit N-m
METERS - Static variable in class nxopen.annotations.DimensionUnit
Specified meters units
METERS - Static variable in class nxopen.cam.InspectionCmmCommandBuilder.LinearUnitsOptions
Use meters
METERS - Static variable in class nxopen.STLImporter.FileUnitsType
STL file is in units of meters.
METERS - Static variable in class nxopen.uf.UFDrf.LinearUnits
METERS - Static variable in class nxopen.VRMLImporter.FileUnitsType
VRML file is in units of meters.
method() - Method in interface nxopen.annotations.DimensionMeasurementBuilder
Returns the measurement method for the size of the dimension
License requirements: None.
method() - Method in interface nxopen.annotations.DimensionSetBuilder
Returns the dimension set method
License requirements: None.
method() - Method in interface nxopen.cae.ElementConnectivityBuilder
Returns an element modification method.
method() - Method in interface nxopen.cae.ElementTranslateBuilder
Returns the method to be used for translating the selected elements
License requirements: None.
method() - Method in interface nxopen.cae.ModelUpdateOptimOptionsBuilder
Returns the method
License requirements: None.
method() - Method in interface nxopen.cam.BoundaryTurnMemberOffset
Returns the offset method
License requirements: None.
METHOD - Static variable in class nxopen.cam.CAMSession.ObjectSubtype
Machining Method
method() - Method in interface nxopen.cam.InPathEventDataBuilder
Returns the Inpath Events Location method
License requirements: cam_base ("CAM BASE")
.
Method - Interface in nxopen.cam
Represents a Method Group
To create or edit an instance of this class, use
MethodBuilder
Created in NX7.5.0
method() - Method in interface nxopen.cam.ToolAxisChange
Returns the tool axis change method
License requirements: None.
method() - Method in interface nxopen.die.AddSurfBuilder
Returns the addendum surface output method.
method() - Method in interface nxopen.display.NonProportionalZoom
Returns the type of mouse interaction used to define the non-proportional zoom.
method() - Method in interface nxopen.drawings.BordersAndZonesBuilder
Method - Class in nxopen.drawings
the zone method
method() - Method in interface nxopen.drawings.SheetBorderSettingsBuilder
Returns the method
License requirements: None.
method() - Method in interface nxopen.features.ChamferBuilder
Returns the offset method.
method() - Method in interface nxopen.features.OffsetEdgeBuilder
Returns the method for offset edge
License requirements: None.
method() - Method in interface nxopen.features.shipdesign.InverseBendingLinesBuilder
Returns the method used to calculate the number and spacing of the curves on the profile.
method() - Method in interface nxopen.features.VariableOffsetBuilder
Returns the offset method
License requirements: None.
method - Variable in class nxopen.FollowFilletRule.Data
Selection Intent method
method() - Method in interface nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder
Returns the method
License requirements: None.
method() - Method in interface nxopen.geometricutilities.SpineDefinitionBuilder
Returns the method
License requirements: None.
method - Variable in class nxopen.HumanReachZone.Data
Method used to create the reach zone
method() - Method in interface nxopen.IPlane
Returns a plane type
License requirements: None.
method() - Method in interface nxopen.ModelingViewHighQualityImage
Returns the method to use for the generation of the High Quality Image.
Method - Class in nxopen.routing
Available application methods for Overstock Applications for a given Overstock
method - Variable in class nxopen.routing.SplinePathBuilder.OffsetData
The type of offset object. 0 = Not Offset,
1 = Stock Offset Point, 2 = Stock Offset Surface
method - Variable in class nxopen.uf.UFCurve.BridgeData
method - Variable in class nxopen.uf.UFModl.MethodList
method - Variable in class nxopen.uf.UFModl.SmholeData
method - Variable in class nxopen.uf.UFModl.SymbThreadData
method - Variable in class nxopen.uf.UFSo.SplineData
method - Variable in class nxopen.uf.UFUi.SelectRoutingObjectsData
method() - Method in interface nxopen.weld.GrooveBuilder
method() - Method in interface nxopen.weld.WeldGrooveBuilder
Returns the method for creating skip welds
License requirements: ugweld ("UG WELD")
.
METHOD_AUTOMATIC - Static variable in class nxopen.cam.DmBndBuilder.BndPatternCenterTypes
Automatic
METHOD_SPECIFY - Static variable in class nxopen.cam.DmBndBuilder.BndPatternCenterTypes
Specify
MethodBuilder - Interface in nxopen.cam
Represents a Method Builder
This is an abstract class, and cannot be instantiated.
methodChoice() - Method in interface nxopen.cae.PreTestExciterConfigBuilder
Returns the exciter selection method
License requirements: None.
methodData - Variable in class nxopen.uf.UFModl.RefitFaceData
MethodList() - Constructor for class nxopen.uf.UFModl.MethodList
MethodList(int, int, Tag, double[], UFModl.StringList) - Constructor for class nxopen.uf.UFModl.MethodList
methodOption() - Method in interface nxopen.cae.ElementExtrudeBuilder
Returns the method option
License requirements: None.
methodOption() - Method in interface nxopen.cae.ElementProjectBuilder
Returns the method option
License requirements: None.
methodOption() - Method in interface nxopen.cae.NodeProjectBuilder
Returns the method option
License requirements: None.
methodOption() - Method in interface nxopen.cae.NodeTranslateBuilder
Returns the method option
License requirements: None.
methodType() - Method in interface nxopen.cae.BeamSectionOrientationOptions
Returns the orientation definition method
License requirements: None.
methodType() - Method in interface nxopen.cam.InspectionMethodBuilder
Returns the method feature type
License requirements: None.
methodType() - Method in interface nxopen.display.SelPref
Returns the method type
License requirements: None.
methodType() - Method in interface nxopen.tooling.MoldInsertBuilder
Returns the method type
License requirements: None.
methodUsed - Variable in class nxopen.weld.WeldPointExitBuilder.FeatureInfo
the method used to create the feature
METRIC - Static variable in class nxopen.cam.CAMSetup.OutputUnits
use metric as output unit
METRIC - Static variable in class nxopen.cam.DrillThreadMillToolBuilder.ToolFormTypeTypes
Metric
METRIC - Static variable in class nxopen.cam.fbm.ThreadFeatureGeometry.Form
Form: Metric
METRIC - Static variable in class nxopen.cam.HoleBossGeom.FormTypes
Form: Metric
METRIC - Static variable in class nxopen.CGMBuilder.UnitsOption
Metric units
METRIC - Static variable in class nxopen.DxfdwgImporter.UnitsEnum
units millimeters
METRIC - Static variable in class nxopen.PlotBuilder.UnitsOption
Metric
METRIC - Static variable in class nxopen.PrintPDFBuilder.UnitsOption
Metric
METRIC - Static variable in class nxopen.uf.UFConstants
METRIC_SIZE - Static variable in class nxopen.uf.UFDraw.SizeState
metricNominalDecimalPlaces() - Method in interface nxopen.annotations.Dimension
Returns a setting to control the number of decimal places for the nominal value of a metric dimension.
metricToleranceDecimalPlaces() - Method in interface nxopen.annotations.Dimension
Returns a setting to control the number of decimal places for the metric tolerance value of a dimension.
mfgFeatureGroup() - Method in interface nxopen.features.shipdesign.DvToMvMappingBuilder
Returns the mfg feature group.
mfm() - Method in interface nxopen.UFSession
MG - Static variable in class nxopen.cae.PreTestExportUnvBuilder.FileUnitsOption
MG: Meter (kilogram f)
MG_MESHDIR_DONT_REVERSE - Static variable in class nxopen.uf.UFSf.MeshGeomMeshdir
MG_MESHDIR_FROM_END - Static variable in class nxopen.uf.UFSf.MeshGeomMeshdir
MG_MESHDIR_FROM_START - Static variable in class nxopen.uf.UFSf.MeshGeomMeshdir
MG_MESHDIR_REVERSE - Static variable in class nxopen.uf.UFSf.MeshGeomMeshdir
MG_MESHDIR_UNDEFINED - Static variable in class nxopen.uf.UFSf.MeshGeomMeshdir
MG_MESHDIR_UNINITIALIZED - Static variable in class nxopen.uf.UFSf.MeshGeomMeshdir
MHZ - Static variable in class nxopen.cae.LaminateSineEventBuilder.AdditionalFrequeciesUnitsEnum
MICKEY - Static variable in class nxopen.tooling.CornerDesignBuilder.CornerTypeOpt
mickey
MICKEY - Static variable in class nxopen.tooling.PiercingInsertBuilder.NormalBbpslugType
Bottom plate slug type is mickey
MICKEY - Static variable in class nxopen.tooling.PiercingInsertBuilder.NormalDsslugType
Die shoe slug type is mickey
Microposition - Interface in nxopen.blockstyler
Represents a Microposition block .
micropositioningScale - Variable in class nxopen.features.subdivision.CageManipulatorData.ObjectMoveData
The micropositioning scale.
MID - Static variable in class nxopen.InferSnapType.SnapType
Snap point mid
MID_CENTER - Static variable in class nxopen.annotations.AlignmentPosition
MID_CENTER - Static variable in class nxopen.annotations.OriginBuilder.AlignmentPosition
Mid center position
MID_CENTER - Static variable in class nxopen.annotations.TableCellStyleBuilder.TextAlignmentType
Mid center
MID_EYE_POINT - Static variable in class nxopen.HumanData.EditDisplayBodyParts
Indicate edit display body parts named mid eye point
MID_LEFT - Static variable in class nxopen.annotations.AlignmentPosition
MID_LEFT - Static variable in class nxopen.annotations.OriginBuilder.AlignmentPosition
Mid left position
MID_LEFT - Static variable in class nxopen.annotations.TableCellStyleBuilder.TextAlignmentType
Mid left
MID_PLANE_CUT - Static variable in class nxopen.features.sheetmetal.NormalCutoutBuilder.CutTypeOptions
MID_POINT - Static variable in class nxopen.cam.NcmSubopBuilder.DefaultRegionStartTypes
start at mid point
MID_POINT - Static variable in class nxopen.weld.EasyPatternBuilder.HemMethodTypes
Use the mid point of a section cut.
MID_RIGHT - Static variable in class nxopen.annotations.AlignmentPosition
MID_RIGHT - Static variable in class nxopen.annotations.OriginBuilder.AlignmentPosition
Mid right position
MID_RIGHT - Static variable in class nxopen.annotations.TableCellStyleBuilder.TextAlignmentType
Mid right
MIDDLE - Static variable in class nxopen.annotations.DraftingNoteBuilder.TextAlign
Align middle
MIDDLE - Static variable in class nxopen.annotations.LeaderAlignment
MIDDLE - Static variable in class nxopen.annotations.StackHorizontalAlignment
Align horizontally along middle line of text box
MIDDLE - Static variable in class nxopen.annotations.TableCellStyleBuilder.BorderLocationType
MIDDLE - Static variable in class nxopen.annotations.VerticalTextJustification
MIDDLE - Static variable in class nxopen.bodydes.OnestepUnformBuilder.Surface
Onestep solver will not offset middle surface
MIDDLE - Static variable in class nxopen.cae.DurabilityStressAxesBuilder.ShellRegionEnum
Middle
MIDDLE - Static variable in class nxopen.cae.optimization.Hookes
Deprecated.
Middle
MIDDLE - Static variable in class nxopen.cae.optimization.TBSLoadCase.LayerOption
Mid-layer of shell
MIDDLE - Static variable in class nxopen.cae.responsesimulation.DataLocation.Shell
MIDDLE - Static variable in class nxopen.cae.responsesimulation.NodalFunctionEvalShellLocation
Middle layer
MIDDLE - Static variable in class nxopen.cae.responsesimulation.ShellElementEvaluationLocation
MIDDLE - Static variable in class nxopen.cae.Result.Section
MIDDLE - Static variable in class nxopen.die.TrimLineDevelopmentBuilder.Surface
Onestep solver will not offset middle surface
MIDDLE - Static variable in class nxopen.features.ShelfBuilder.Types
MIDDLE - Static variable in class nxopen.features.StepBuilder.StepTypes
Adds a step between two boundary curves
MIDDLE - Static variable in class nxopen.features.vehicledesign.OilPanBuilder.PositionType
MIDDLE - Static variable in class nxopen.routing.OverstockBuilder.PointType
Middle
MIDDLE - Static variable in class nxopen.routing.PointDefinition
The point defines the middle of the overstock application.
MIDDLE - Static variable in class nxopen.uf.UFCurve.EndType
MIDDLE - Static variable in class nxopen.weld.JointExitBuilder.Positions
the middle position
MIDDLE_BASE_DATA - Static variable in class nxopen.features.vehicledesign.PendulumPlacementBuilder.PositionMethodType
MIDDLE_CENTER - Static variable in class nxopen.annotations.RegionBuilder.AlignmentPosition
middle center
MIDDLE_CENTER - Static variable in class nxopen.display.ImageBaseBuilder.BasePointChoices
middle center
MIDDLE_CENTER - Static variable in class nxopen.display.TransientText.StandardTextRef
Display the text with the given position
in middle center of text box
MIDDLE_CENTER - Static variable in class nxopen.geometricutilities.RectangularFrameBuilder.AnchorLocationType
Middle center position
MIDDLE_CENTER - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.StandardTextRef
Display the text with the given position
in middle center of text box
MIDDLE_CENTER - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.TextRef
Display the text with the given position in middle center of text box
MIDDLE_LEFT - Static variable in class nxopen.annotations.RegionBuilder.AlignmentPosition
middle left
MIDDLE_LEFT - Static variable in class nxopen.display.ImageBaseBuilder.BasePointChoices
middle left
MIDDLE_LEFT - Static variable in class nxopen.display.TransientText.StandardTextRef
Display the text with the given position
in the middle left of the text box
MIDDLE_LEFT - Static variable in class nxopen.geometricutilities.RectangularFrameBuilder.AnchorLocationType
Middle left position
MIDDLE_LEFT - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.StandardTextRef
Display the text with the given position
in the middle left of the text box
MIDDLE_LEFT - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.TextRef
Display the text with the given position in the middle left of the text box
MIDDLE_OF_CURVE - Static variable in class nxopen.weld.WeldSpacingCalcMethod
spaces based on middle of curve
MIDDLE_PRINCIPAL - Static variable in class nxopen.cae.Result.Component
MIDDLE_RIGHT - Static variable in class nxopen.annotations.RegionBuilder.AlignmentPosition
middle right
MIDDLE_RIGHT - Static variable in class nxopen.display.ImageBaseBuilder.BasePointChoices
middle right
MIDDLE_RIGHT - Static variable in class nxopen.display.TransientText.StandardTextRef
Display the text with the given position
in middle right of text box
MIDDLE_RIGHT - Static variable in class nxopen.geometricutilities.RectangularFrameBuilder.AnchorLocationType
Middle right position
MIDDLE_RIGHT - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.StandardTextRef
Display the text with the given position
in middle right of text box
MIDDLE_RIGHT - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.TextRef
Display the text with the given position in middle right of text box
MIDDLE_VEHICLE - Static variable in class nxopen.features.vehicledesign.PendulumPlacementBuilder.PositionMethodType
MIDDLECENTER - Static variable in class nxopen.uf.UFDisp.TextRef
middleFaceCollector() - Method in interface nxopen.features.FaceBlendBuilder
Returns the middle face collector get
License requirements: None.
middleFaceNormFlag() - Method in interface nxopen.features.FaceBlendBuilder
Returns the middle face set normal reversal flag
License requirements: None.
middleHoleData() - Method in interface nxopen.features.HolePackageBuilder
Returns the target body
License requirements: None.
MiddleHoleData - Interface in nxopen.geometricutilities
MIDDLELEFT - Static variable in class nxopen.uf.UFDisp.TextRef
middleNode() - Method in interface nxopen.geometricutilities.NonInflectingLawBuilder
Returns the middle node
License requirements: solid_modeling ("SOLIDS MODELING") OR free_form_modeling ("FREE-FORM MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
middlePlane() - Method in interface nxopen.cae.optimization.TBSCastCondition
Returns the middle plane
License requirements: None.
middlePlane() - Method in interface nxopen.features.vehicledesign.VisionPlaneBuilder
Returns the middle plane option that determines whether to create middle plane or not.
middlePlanePoint() - Method in interface nxopen.cae.optimization.TBSCastCondition
Returns the point within the central plane, only available when nxopen.cae.optimization.TBSCastCondition#middlePlaneType
is
CAE.Optimization.TBSCastCondition.MiddlePlaneType#POINT
License requirements: None.
MIDDLERIGHT - Static variable in class nxopen.uf.UFDisp.TextRef
midInferredConstraint() - Method in interface nxopen.features.AssociativeArcBuilder
Returns the mid inferred constraint
License requirements: None.
midnode() - Method in interface nxopen.cae.BoltBuilder
Returns the option to include midnodes for creating spider elements
License requirements: None.
MIDNODE - Static variable in class nxopen.cae.ElementModifyOrderBuilder.Operation
changes the midnode option for a parabolic mesh to mixed, curved or linear
midNodeMove() - Method in interface nxopen.cae.NodeAlignBuilder
Returns the mid node move
License requirements: None.
midNodeOption() - Method in interface nxopen.cae.MappedMeshBuilder
Returns the mid node opt
License requirements: None.
midnodeOption - Variable in class nxopen.uf.UFSf.Ugs2dMeshParms
midnodeOption - Variable in class nxopen.uf.UFSf.UgsTetMeshParms
midNodes - Variable in class nxopen.uf.UFSf.AskElementEdgesData
midnodes - Variable in class nxopen.uf.UFSf.UgsTetMeshParms
midnodeType() - Method in interface nxopen.cae.ElementModifyOrderBuilder
Returns the midnode option
License requirements: None.
midPlane() - Method in interface nxopen.features.vehicledesign.VisionPlaneBuilder
Returns the middle plane inclined angle; means front side,passenger side and driver side are the same.
MIDPOINT - Static variable in class nxopen.cam.ProbeCalibrateStylusMoveBuilder.Depth
Midpoint of cylinder
MIDPOINT - Static variable in class nxopen.cam.ProbeInspectBorebossMoveBuilder.Depth
Midpoint of cylinder
midPoint() - Method in interface nxopen.features.AssociativeArcBuilder
Returns the mid point
License requirements: None.
midpoint() - Method in interface nxopen.InferredConstraintsBuilder
Returns the midpoint infer-constraint setting.
MIDPOINT - Static variable in class nxopen.Sketch.AssocType
The midpoint of a curve
MIDPOINT - Static variable in class nxopen.Sketch.ConstraintType
MIDPOINT - Static variable in class nxopen.SketchConstraintBuilder.Constraint
midpoint - Variable in class nxopen.uf.UFBound.MemberData
MIDPOINT - Static variable in class nxopen.uf.UFSket.ConType
MidPointInformationData() - Constructor for class nxopen.weld.WeldJointBuilder.MidPointInformationData
midPointOfOverstock() - Method in interface nxopen.routing.OverstockApplication
Returns the mid point of overstock on the path.
midPointOptions() - Method in interface nxopen.features.AssociativeArcBuilder
Returns the mid point options
License requirements: None.
midPointReference() - Method in interface nxopen.features.AssociativeArcBuilder
Returns the mid point reference
License requirements: None.
midpt(double[], double[]) - Method in interface nxopen.uf.UFVec2
midpt(double[], double[]) - Method in interface nxopen.uf.UFVec3
midReferenceCsys() - Method in interface nxopen.features.AssociativeArcBuilder
Returns the mid reference coordinate system
License requirements: None.
mids() - Method in interface nxopen.cae.ResultVariable
Returns the MIDs
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
midship() - Method in interface nxopen.features.shipdesign.MainDimensionsBuilder
Returns the expression containing the position value of midship along the X axis.
midsrfFeatureObjId - Variable in class nxopen.uf.UFModeling.AskFacepairParmsData
midsrfType - Variable in class nxopen.uf.UFSf.IsMidsrfData
MidsrfUserParms() - Constructor for class nxopen.uf.UFSf.MidsrfUserParms
MidsrfUserParms(Tag, int, Tag[], double, double) - Constructor for class nxopen.uf.UFSf.MidsrfUserParms
MIDSURFACE_POLYGON_BODIES - Static variable in class nxopen.DisplayManager.ShowHideType
Show or hide midsurface polygon bodies
MidSurfaceByFacePairs - Interface in nxopen.features
Represents a mid surface by face pairs feature
To create or edit an instance of this class, use
MidSurfaceByFacePairsBuilder
Created in NX7.5.0
MidSurfaceByFacePairsBuilder - Interface in nxopen.features
MidSurfaceByFacePairsBuilder.PairingStrategyType - Class in nxopen.features
pairing strategy
MidSurfaceByFacePairsBuilder.SurfaceType - Class in nxopen.features
midsurface options
MidSurfaceByFacePairsBuilder.TrimmingOptionType - Class in nxopen.features
trimming options
MidSurfaceFacePair - Interface in nxopen.features
Represents a mid surface by face pairs feature
This is an abstract class
.
midsurfaceSheetBody - Variable in class nxopen.uf.UFModeling.AskFacepairParmsData
MidSurfaceUserDefined - Interface in nxopen.features
Represents a midsurface user defined feature
To create or edit an instance of this class, use
MidSurfaceUserDefinedBuilder
Created in NX7.5.0
MidSurfaceUserDefinedBuilder - Interface in nxopen.features
midTangent() - Method in interface nxopen.features.AssociativeArcBuilder
Returns the mid tangent
License requirements: None.
midThicknessColor() - Method in interface nxopen.cae.ThicknessBuilder
Returns the mid thickness color
License requirements: None.
midValue - Variable in class nxopen.uf.UFDisp.SrfanlData
midValueDistance - Variable in class nxopen.uf.UFDisp.SrfanlData
midValueMax - Variable in class nxopen.uf.UFDisp.SrfanlData
midValueMean - Variable in class nxopen.uf.UFDisp.SrfanlData
midValueMin - Variable in class nxopen.uf.UFDisp.SrfanlData
midValueNormal - Variable in class nxopen.uf.UFDisp.SrfanlData
midValueSec - Variable in class nxopen.uf.UFDisp.SrfanlData
midValueSlope - Variable in class nxopen.uf.UFDisp.SrfanlData
midValueU - Variable in class nxopen.uf.UFDisp.SrfanlData
midValueV - Variable in class nxopen.uf.UFDisp.SrfanlData
MigratedPanelBuilder - Interface in nxopen.features.sheetmetal
Represents an I-DEAS Migrated Panel feature builder
This builder cannot be instantiated separately.
migrateLegacyLineWidths() - Method in interface nxopen.preferences.PartObject
Migrates line width attributes stored in the part file to
corresponding new line widths.
MILL - Static variable in class nxopen.cam.ConvertFromMCDBuilder.MachineTypes
MILL - Static variable in class nxopen.cam.Tool.Types
Milling tool
MILL10 - Static variable in class nxopen.cam.MillToolBuilder.CutterSubtypes
10-Parameter
MILL10 - Static variable in class nxopen.cam.Tool.Subtypes
Milling tool-10 parameters
MILL5 - Static variable in class nxopen.cam.MillToolBuilder.CutterSubtypes
5-Parameter
MILL5 - Static variable in class nxopen.cam.Tool.Subtypes
Milling tool-5 parameters
MILL7 - Static variable in class nxopen.cam.MillToolBuilder.CutterSubtypes
7-Parameter
MILL7 - Static variable in class nxopen.cam.Tool.Subtypes
Milling tool-7 parameters
MILL_BALL - Static variable in class nxopen.cam.MillToolBuilder.CutterSubtypes
Ball MillTool
MILL_BALL - Static variable in class nxopen.cam.Tool.Subtypes
Milling tool-Ball mill
MILL_CHAMFER - Static variable in class nxopen.cam.Tool.Subtypes
Milling chamfer mill
MILL_FORM - Static variable in class nxopen.cam.Tool.Types
User defined mill tool
MILL_SPHERICAL - Static variable in class nxopen.cam.Tool.Subtypes
Milling spherical mill
MILL_TURN - Static variable in class nxopen.cam.ConvertFromMCDBuilder.MachineTypes
MillAreaGeomBuilder - Interface in nxopen.cam
Represents a MillAreaGeom Builder
To create a new instance of this class, use nxopen.cam.NCGroupCollection#createMillAreaGeomBuilder
Created in NX5.0.0
MillBoundaryGeomBuilder - Interface in nxopen.cam
Represents a MillBoundaryGeom Builder
To create a new instance of this class, use nxopen.cam.NCGroupCollection#createMillBoundaryGeomBuilder
Created in NX5.0.0
MillCutParameters - Interface in nxopen.cam
MillFormToolBuilder - Interface in nxopen.cam
Represents a MillForm Tool Builder
To create a new instance of this class, use nxopen.cam.NCGroupCollection#createMillFormToolBuilder
Created in NX5.0.0
MillGeomBuilder - Interface in nxopen.cam
Represents a MillGeom Builder
To create a new instance of this class, use nxopen.cam.NCGroupCollection#createMillGeomBuilder
Created in NX5.0.0
MILLI_MILLINEWTON - Static variable in class nxopen.cae.FreeBodyResultsBuilder.OutputUnits
Load unit = "mN", Moment unit N-mm
MILLI_MILLINEWTON - Static variable in class nxopen.cae.MechanicalLoadSumBuilder.UserUnit
Load unit = "mN", Moment unit N-mm
MILLI_NEWTON - Static variable in class nxopen.cae.FreeBodyResultsBuilder.OutputUnits
Load unit = "N", Moment unit N-mm
MILLI_NEWTON - Static variable in class nxopen.cae.MechanicalLoadSumBuilder.UserUnit
Load unit = "N", Moment unit N-mm
MILLIMETER - Static variable in class nxopen.tooling.InitProjectBuilder.UnitId
metric project
MILLIMETERS - Static variable in class nxopen.annotations.DimensionUnit
Specifies millimeters units
MILLIMETERS - Static variable in class nxopen.ASCImporter.Units
Millimeters Selection
MILLIMETERS - Static variable in class nxopen.BasePart.Units
MILLIMETERS - Static variable in class nxopen.cam.InspectionCmmCommandBuilder.LinearUnitsOptions
Use millimeters
MILLIMETERS - Static variable in class nxopen.display.RayTracedStudioEditorBuilder.RayTracedStudioStaticImageUnitsType
static image size specified in millimeters
MILLIMETERS - Static variable in class nxopen.Part.Units
MILLIMETERS - Static variable in class nxopen.preferences.RoutingPath.RadiusUnits
Use metric (mm) units
MILLIMETERS - Static variable in class nxopen.STLImporter.FileUnitsType
STL file is in units of millimeters.
MILLIMETERS - Static variable in class nxopen.uf.UFCgm.Units
MILLIMETERS - Static variable in class nxopen.uf.UFDrf.LinearUnits
MILLIMETERS - Static variable in class nxopen.uf.UFPlot.Units
MILLIMETERS - Static variable in class nxopen.VRMLImporter.FileUnitsType
VRML file is in units of millimeters.
MILLING - Static variable in class nxopen.sim.KinematicChain.Types
Milling
MillingToolBuilder - Interface in nxopen.cam
Represents a MillingTool Builder
This is an abstract class, and cannot be instantiated.
MillingToolBuilder.ToolDirectionTypes - Class in nxopen.cam
Available types for tool direction milling tool
millingTrackpointBuilder() - Method in interface nxopen.cam.MillingToolBuilder
Returns the mill trackpoint builder
License requirements: cam_base ("CAM BASE")
.
MillingTrackpointBuilder - Interface in nxopen.cam
Represents a Milling Trackpoint Builder .
MillingTrackpointBuilder.AddData - Class in nxopen.cam
MillingTrackpointBuilder.CalculateDistanceData - Class in nxopen.cam
MillingTrackpointBuilder.Data - Class in nxopen.cam
MillingTrackpointBuilder.TrackPointData - Class in nxopen.cam
MillingTrackpointBuilder.Types - Class in nxopen.cam
the definition enum .
MILLIONTH - Static variable in class nxopen.cam.RoundPointBuilder.Output
nearest millionth
MillMachineControl - Interface in nxopen.cam
Represents a Mill Machine Control operation
To create or edit an instance of this class, use
MillMachineControlBuilder
Created in NX7.5.0
MillMachineControlBuilder - Interface in nxopen.cam
MillMethodBuilder - Interface in nxopen.cam
Represents a Mill Method Builder
To create a new instance of this class, use nxopen.cam.NCGroupCollection#createMillMethodBuilder
Created in NX5.0.0
MillOperation - Interface in nxopen.cam
Represents a Mill operation
To create or edit an instance of this class, use
MillOperationBuilder
Created in NX7.5.0
MillOperationBuilder - Interface in nxopen.cam
Represents a MillOperation Builder
This is an abstract class and cannot be instantiated.
MillOrientGeomBuilder - Interface in nxopen.cam
Represents a MillOrientGeom Builder
To create a new instance of this class, use nxopen.cam.NCGroupCollection#createMillOrientGeomBuilder
Created in NX5.0.0
MillOrientGeomBuilder.LowerLimitModes - Class in nxopen.cam
The lower limit mode options .
millPocketLocation() - Method in interface nxopen.cam.ConvertFromMCDBuilder
Returns the mill pocket location
License requirements: None.
millPocketNumber() - Method in interface nxopen.cam.ConvertFromMCDBuilder
Returns the mill pocket number
License requirements: None.
MillTextGeomBuilder - Interface in nxopen.cam
Represents a MillTextGeom Builder
To create a new instance of this class, use nxopen.cam.NCGroupCollection#createMillTextGeomBuilder
Created in NX5.0.0
MillToolBuilder - Interface in nxopen.cam
Represents a Mill Tool Builder
To create a new instance of this class, use nxopen.cam.NCGroupCollection#createMillToolBuilder
Created in NX5.0.0
MillToolBuilder.CutterSubtypes - Class in nxopen.cam
Available types for mill tool subtype
MillToolProbing - Interface in nxopen.cam
Represents a Mill Tool operation
To create or edit an instance of this class, use
MillToolProbingBuilder
Created in NX8.5.1
MillToolProbingBuilder - Interface in nxopen.cam
MillUserDefined - Interface in nxopen.cam
Represents a Mill User Defined operation
To create or edit an instance of this class, use
MillUserDefinedBuilder
Created in NX7.5.0
MillUserDefinedBuilder - Interface in nxopen.cam
MillVolumeGeomBuilder - Interface in nxopen.cam
Represents a MillVolumeGeom Builder
To create a new instance of this class, use nxopen.cam.NCGroupCollection#createMillVolumeGeomBuilder
Created in NX5.0.0
MIMIC - Static variable in class nxopen.JtCreator.FileStructure
MIMIC
mimimumNumberPointsOnOverlap() - Method in interface nxopen.weld.AutoPointBuilder
Returns the mimimum number points to create on an overlap sheet
License requirements: None.
MIN - Static variable in class nxopen.cae.optimization.TBSBaseDesignVariableBuilder.GroupOperator
Minimum value of the selection area
min - Variable in class nxopen.cae.ResultAccess.AskMinMaxLocationData
min - Variable in class nxopen.cae.ResultAccess.AskNMinMaxLocationData
min - Variable in class nxopen.uf.UFMotion.JointLimits
min - Variable in class nxopen.uf.UFSim.AskAxisLimitsData
MIN_CLEARANCE - Static variable in class nxopen.MeasureDistanceBuilder.MeasureType
MIN_CLEARANCE - Static variable in class nxopen.MeasureManager.ProjectionType
MIN_DIST - Static variable in class nxopen.preferences.RoutingPath.ChainMethod
Chain with minimum path length
MIN_MAC - Static variable in class nxopen.cae.PreTestSensorConfigBuilder.AlgorithmChoiceType
MIN_PRINCIPAL - Static variable in class nxopen.cae.responsesimulation.DirectionDataComponent
MIN_PRINCIPLE - Static variable in class nxopen.cae.responsesimulation.StrengthStressCriteria
minAngle() - Method in interface nxopen.cam.TurnCornerControl
Returns the minimum angle
License requirements: None.
minAngle() - Method in interface nxopen.tooling.DieEngTrimAngleCheckBuilder
Returns the lower limit of a valid trim angle
License requirements: None.
minAngleFoldedFacets() - Method in interface nxopen.facet.CleanupFacetBodyBuilder
Returns the min angle for folded facets
License requirements: None.
minAngleToggle() - Method in interface nxopen.cae.ElementSplitBuilder
Returns a value indicating whether elements are to be split based on Minimum Angle.
minAngleValue() - Method in interface nxopen.cae.ElementSplitBuilder
Returns a threshold minimum angle value.
minBendRadius() - Method in interface nxopen.routing.electrical.ElectricalStockDefinition
Returns the min bend radius of stock
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
minBoringDiameterBuilder() - Method in interface nxopen.cam.TurningToolBuilder
Returns the min. boring diameter builder (inheritable double)
License requirements: cam_base ("CAM BASE")
Created in NX5.0.0
minBoringDiameterToggle() - Method in interface nxopen.cam.TurningToolBuilder
Returns the min. boring diameter toggle
License requirements: None.
minClearance() - Method in interface nxopen.cam.NcmHoleMachiningEngRet
Returns the engage/retract min clearance builder
License requirements: None.
minClearance() - Method in interface nxopen.cam.PlungeMillingBuilder
minClearanceBuilder() - Method in interface nxopen.cam.NcmPlanarEngRetBuilder
Returns the engage/retract min clearance builder
License requirements: None.
minCompensationFactor() - Method in interface nxopen.cam.CornerControlBuilder
Returns the minimum compensation factor.
minCorner - Variable in class nxopen.uf.UFModlGeneral.AskBoundingBoxAlignedData
minCorner - Variable in class nxopen.uf.UFModlGeneral.AskBoundingBoxExactData
MinCutDepth - Interface in nxopen.cam
minCutDepth() - Method in interface nxopen.cam.TurnCutParameters
Returns the min cut depth
License requirements: None.
MinCutDepth.Types - Class in nxopen.cam
the mininmum cut depth options .
minCutLength() - Method in interface nxopen.cam.MillOperationBuilder
Returns the min cut length builder (tool dependent double)
License requirements: None.
MinCutLength - Interface in nxopen.cam
minCutLength() - Method in interface nxopen.cam.TurnCutParameters
Returns the min cut length
License requirements: None.
MinCutLength.Types - Class in nxopen.cam
the mininmum cut length options .
minCutLengthBuilder() - Method in interface nxopen.cam.FlowBuilder
Returns the flow min cut length
License requirements: None.
minCutVolume() - Method in interface nxopen.cam.MillCutParameters
Returns the minimum cut volume
License requirements: None.
MinCutVolume - Interface in nxopen.cam
minDampingStatus() - Method in interface nxopen.cae.responsesimulation.EvaluationParameters
Returns the minimum damping ratio status
License requirements: nx_response_anlys ("NX Response Analysis")
.
minDist - Variable in class nxopen.uf.UFModeling.AskMinimumDist2Data
minDist - Variable in class nxopen.uf.UFModeling.AskMinimumDist3Data
minDist - Variable in class nxopen.uf.UFModeling.AskMinimumDistData
minDist - Variable in class nxopen.uf.UFSf.AskClosestPointData
minDist - Variable in class nxopen.uf.UFSf.FindMinimumDistanceData
minElemThickness() - Method in interface nxopen.cae.LaminateExtrudeSetupBuilder
Returns the relative minimum thickness for a corner node ply element.
minFacetNumber() - Method in interface nxopen.facet.CleanupFacetBodyBuilder
Returns the min facet number for seperate regions
License requirements: None.
minFacingDiameterBuilder() - Method in interface nxopen.cam.TurningToolBuilder
Returns the min. facing diameter builder (inheritable double)
License requirements: cam_base ("CAM BASE")
Created in NX5.0.0
minFacingDiameterToggle() - Method in interface nxopen.cam.TurningToolBuilder
Returns the min. facing diameter toggle
License requirements: None.
minHolderClearance() - Method in interface nxopen.cam.ToolPathTiltBuilder
minHolderClearance() - Method in interface nxopen.cam.ToolPathTiltClearance
Returns the minimum holder clearance
License requirements: None.
minid - Variable in class nxopen.cae.ResultAccess.AskMinMaxLocationData
minid - Variable in class nxopen.cae.ResultAccess.AskNMinMaxLocationData
minimalRadius() - Method in interface nxopen.tooling.BlendCurve3DBuilder
Returns the minimal radius of the corner to blend.
MINIMIZE_POINTS - Static variable in class nxopen.cam.NcmSmoothingBuilder.SmoothToleranceSources
minimize points tolerance type
MINIMIZE_TRAVEL - Static variable in class nxopen.cam.ParamBuilder.OptimizationTypes
minimize travel
minimizeNumberOfEngages() - Method in interface nxopen.cam.MillCutParameters
Returns the minimize number of engages toggle
License requirements: None.
minImprovement() - Method in interface nxopen.cae.ModelUpdateOptimOptionsBuilder
Returns the minimum improvement
License requirements: None.
MINIMUM - Static variable in class nxopen.cae.optimization.Goal
Minimum value
MINIMUM - Static variable in class nxopen.cae.optimization.Hookes
Deprecated.
Minimum
MINIMUM - Static variable in class nxopen.cae.optimization.TBSLoadCase.LayerOption
the minimum value among Top, Middle and Bottom
MINIMUM - Static variable in class nxopen.cae.optimization.TBSLoadCaseManager.SelectionType
Minimum value of the selected load cases
MINIMUM - Static variable in class nxopen.cae.optimization.TBSObjectives.ObjectiveType
Target is to minimize the list of design response
MINIMUM - Static variable in class nxopen.cae.optimization.TBSShapeOptimizationParameters.DisplacementStepsize
Minimum displacement stepsize
MINIMUM - Static variable in class nxopen.cae.Post.NodeValueSharingCriterion
MINIMUM - Static variable in class nxopen.cae.Post.ValueSharingCriterion
MINIMUM - Static variable in class nxopen.cae.PostGraphAcrossIterationsBuilder.CombinationMethod
MINIMUM - Static variable in class nxopen.cae.PostGraphBuilder.GeometryValue
MINIMUM - Static variable in class nxopen.cae.PostGraphBuilder.NodalCombination
MINIMUM - Static variable in class nxopen.cae.Result.ElementValueCriterion
MINIMUM - Static variable in class nxopen.cae.Result.Section
MINIMUM - Static variable in class nxopen.cae.ResultMeasure.Operation
Evaluate for the minimum value
MINIMUM - Static variable in class nxopen.cae.ResultProbeBuilder.CombineAcrossEntities
MINIMUM - Static variable in class nxopen.cae.ResultProbeBuilder.CombineAcrossIterations
MINIMUM - Static variable in class nxopen.cae.ResultProbeBuilder.GeometryValue
MINIMUM - Static variable in class nxopen.cae.ResultProbeBuilder.NodalCombination
MINIMUM - Static variable in class nxopen.cae.ResultsEnvelopeBuilder.Operation
MINIMUM - Static variable in class nxopen.cae.ResultsManipulationBuilder.ElementValueAtNode
MINIMUM - Static variable in class nxopen.cae.SimBcPlotContoursBuilder.ResolveOverlapType
MINIMUM - Static variable in class nxopen.cae.SimBcXyPlotBuilder.ResolveMultipleMatches
minimum() - Method in interface nxopen.cam.ContourAngle
Returns the minimum face angle
License requirements: None.
MINIMUM - Static variable in class nxopen.features.BridgeCurveBuilder.MinRadiusTypes
Deprecated.
regular
MINIMUM - Static variable in class nxopen.features.BridgeCurveBuilderEx.RadiusConstraintMethods
Minimum radius
MINIMUM - Static variable in class nxopen.features.StyledBlendBuilder.StyledBlendRadiusConstraintType
Minimum radius constraint
MINIMUM - Static variable in class nxopen.fields.DisplayPropertiesBuilder.DepLabelValueEnum
MINIMUM - Static variable in class nxopen.geometricanalysis.DeviationGaugeBuilder.MinMaxType
Minimum
MINIMUM - Static variable in class nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder.CurvatureTypes
Minimum
MINIMUM - Static variable in class nxopen.geometricutilities.CombOptionsBuilder.LabelTypes
Minimum
MINIMUM - Static variable in class nxopen.MeasureDistanceBuilder.MeasureType
MINIMUM - Static variable in class nxopen.MeasureManager.MeasureType
MINIMUM - Static variable in class nxopen.MeasureManager.ProjectionType
MINIMUM - Static variable in class nxopen.optimization.OptimizationBuilder.OptimizationTargetType
Target is minimum value of design objective
MINIMUM_ABSOLUTE_PRINCIPAL_STRESS - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
Absolute value of the minimum principal Stress
MINIMUM_AND_MAXIMUM - Static variable in class nxopen.cae.Post.Marker
MINIMUM_ANGLE - Static variable in class nxopen.geometricanalysis.DeviationChecking.DeviationOptions
show minimum
angle deviation
MINIMUM_ANGLE - Static variable in class nxopen.Measurement.DeviationReportType
Minimum Angle
MINIMUM_BOUNDED - Static variable in class nxopen.features.IFormBuilder.BSurfaceExtractionOptions
Extract minimum bounded surface
MINIMUM_BOUNDED - Static variable in class nxopen.features.StudioXformBuilderEx.ExtrationMethodType
Extract minimum bounded surface
MINIMUM_BOX - Static variable in class nxopen.cam.CutParametersSimplifyShapesTypes
minumum box
MINIMUM_CLEARANCE - Static variable in class nxopen.cam.NcmHoleMachiningEngRet.EngRetTypes
Minimum Clearance
MINIMUM_CURVATURE - Static variable in class nxopen.features.shipdesign.RollingLineBuilder.ConstructionMethodTypes
Use an initial value method and march along the minimum curvature at each subsequent location.
MINIMUM_DEVIATION - Static variable in class nxopen.cam.InspectionMethodBuilder.CylinderFittingTypes
Minimum Deviation
MINIMUM_DEVIATION3D - Static variable in class nxopen.cam.InspectionMethodBuilder.SurfaceProfileTypes
Minimum Deviation - 3D
MINIMUM_DEVIATION_NORMAL - Static variable in class nxopen.cam.InspectionMethodBuilder.SurfaceProfileTypes
Minimum Deviation - Normal
MINIMUM_DISTANCE - Static variable in class nxopen.features.vehicledesign.MirrorCertificationBuilder.EyeMethodType
Represents using the minimum distance
MINIMUM_DISTANCE - Static variable in class nxopen.GenericMeasure.Type
MINIMUM_DISTANCE - Static variable in class nxopen.geometricanalysis.DeviationChecking.DeviationOptions
show
minimum distance deviation
MINIMUM_DISTANCE - Static variable in class nxopen.Measurement.DeviationReportType
Minimum Distance
MINIMUM_DISTANCE - Static variable in class nxopen.motion.PackagingMeasureBuilder.MeasureType
Measure minimum distance between objects.
MINIMUM_EDGE_DISTANCE - Static variable in class nxopen.weld.WeldAdvisorCheckerType
minimum edge distance
MINIMUM_INPLANE_STRESS - Static variable in class nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder.StressTypeName
Display minimum in-plane stress.
MINIMUM_KINETIC_ENERGY - Static variable in class nxopen.motion.LmsSolverProperty.DynamicInitialVelocityMethods
MINIMUM_MAGNITUDE - Static variable in class nxopen.cae.AfuMathOperation.Overall
Gets minimum magnitude values of AFU records
MINIMUM_MAXIMUM - Static variable in class nxopen.fields.DisplayPropertiesBuilder.DepLabelValueEnum
MINIMUM_MAXIMUM - Static variable in class nxopen.geometricutilities.CombOptionsBuilder.LabelTypes
Minimum and Maximum
MINIMUM_ONLY - Static variable in class nxopen.cae.Post.Marker
MINIMUM_POINT_DISTANCE - Static variable in class nxopen.weld.WeldAdvisorCheckerType
minimum point distance
MINIMUM_PRINCIPAL - Static variable in class nxopen.cae.DurabilityEventStrengthSettingsBuilder.StressTypeEnum
Minimum Principal
MINIMUM_PRINCIPAL - Static variable in class nxopen.cae.Result.Component
MINIMUM_PRINCIPLE - Static variable in class nxopen.uf.UFSf.DursolStressType
MINIMUM_SIZE - Static variable in class nxopen.cae.optimization.TBSTopologyRestrictAreaBuilder.CheckTypeOption
Definition of minimum structural diameter
MINIMUM_SMART_DISTANCE - Static variable in class nxopen.GenericMeasure.Type
MINIMUM_TEMPERATURE - Static variable in class nxopen.cae.Result.Quantity
MINIMUM_VALUE - Static variable in class nxopen.cae.AfuMathOperation.Overall
Gets minimum values of AFU records
minimumAngle() - Method in interface nxopen.cae.optimization.TBSSmoothBuilder
Returns the minimum angle that defines the minimal angle of the triangles that result from the smoothing
and data reduction.
minimumAngle() - Method in interface nxopen.cam.Cutcom
Returns the cutter compensation minimum angle
License requirements: None.
minimumAngle() - Method in interface nxopen.cam.NCAssistantBuilder
Returns the Minimum Angle
License requirements: None.
minimumArea() - Method in interface nxopen.cam.RoughFinishTurningBuilder
Returns the Minimum Area type
License requirements: None.
minimumArea() - Method in interface nxopen.facet.DecimateFacetBodyBuilder
Returns the value indicating area of the smallest facet that is to be retained.
minimumAreaSize() - Method in interface nxopen.cam.RoughFinishTurningBuilder
Returns the Minimum Area Size
License requirements: None.
minimumAreaUnit() - Method in interface nxopen.cam.RoughFinishTurningBuilder
Returns the Minimum Area Unit
License requirements: None.
minimumAverage() - Method in interface nxopen.cam.StepoverBuilder
Returns the variable average minimum value
License requirements: None.
minimumAverageBuilder() - Method in interface nxopen.cam.StepoverBuilder
Returns the variable average minimum builder
License requirements: None.
minimumBorderLength() - Method in interface nxopen.facet.FeatureExtractionBuilder
Returns the minimum border length
License requirements: None.
minimumCavityDepth() - Method in interface nxopen.die.RotorSectionBuilder
Returns the throat minimum cavity depth of the die rotor casting
License requirements: ug_die_design ("Die Design")
.
minimumCheckingAllowableRatio() - Method in interface nxopen.routing.SplinePathBuilder
Returns the minimum ratio allowed for this spline
License requirements: routing_base ("Routing Basic")
.
minimumCheckingAllowableValue() - Method in interface nxopen.routing.SplinePathBuilder
Returns the minimum radius allowed for this spline.
minimumCheckingMethod() - Method in interface nxopen.routing.SplinePathBuilder
Returns the minimum checking method for this spline.
minimumClearance() - Method in interface nxopen.routing.DuctReinforcementBuilder
Returns the minimum clearance value for duct reinforcement
It defines the minimum distance from the beginning and end of the path to place the
first and last piece of reinforcement stock.
minimumClearanceBuilder() - Method in interface nxopen.cam.NcmTurnThreadBuilder
Returns the Minimum Clearance
License requirements: None.
minimumComponentsForLargeAssemblyOption() - Method in interface nxopen.preferences.PartDrafting
Returns the minimum number of components for large assembly option to get enabled
License requirements: None.
minimumCornerAngle() - Method in interface nxopen.cam.CornerControlBuilder
Returns the minimum corner angle.
minimumCutLength() - Method in interface nxopen.cam.ToolPathSplitParametersBuilder
Returns the minimum cut length builder
License requirements: None.
minimumDegree() - Method in interface nxopen.geometricutilities.CurveFitData
Returns the minimum degree
License requirements: None.
minimumDepth() - Method in interface nxopen.cam.CutLevelPlanar
Returns the minimum depth
License requirements: None.
MINIMUMDISTANCE - Static variable in class nxopen.cae.ContactMeshBuilder.AlignmentType
minimumDistance() - Method in interface nxopen.cam.StepoverBuilder
Returns the Minimum Distance
License requirements: None.
minimumDistance() - Method in interface nxopen.tooling.BlankNestingBuilder
Returns the minimum distance between the adjacent blanks.
minimumDistance - Variable in class nxopen.uf.UFBound.AllData
MinimumDistanceData() - Constructor for class nxopen.Measurement.MinimumDistanceData
minimumDistanceToGeometry() - Method in interface nxopen.drafting.AutomationPreferencesBuilder
Returns the minimum distance to geometry
License requirements: None.
minimumDraftAngle() - Method in interface nxopen.die.AddendumSectionBuilder
Returns the minimum draft angle.
minimumDY() - Method in interface nxopen.Hyperbola
Returns the minimum DY width.
minimumDY() - Method in interface nxopen.Parabola
Returns the minimum DY width.
minimumEdgeLength() - Method in interface nxopen.features.AestheticFaceBlendBuilder
Returns the max edge length
License requirements: None.
minimumElementSize() - Method in interface nxopen.tooling.LsdynaKfileGeneratorBuilder
Returns the minimum element size
License requirements: None.
minimumExtensionLength() - Method in interface nxopen.die.RotorSectionBuilder
Returns the throat minimum extension length of the die rotor casting
License requirements: ug_die_design ("Die Design")
.
minimumFaceAngle - Variable in class nxopen.uf.UFSf.Ugs2dMeshParms
minimumFaceAngle - Variable in class nxopen.uf.UFSf.UgsTetMeshParms
minimumFacetLength - Variable in class nxopen.uf.UFMotion.StlParameters
minimumFlangeWidth() - Method in interface nxopen.weld.AutoPointBuilder
Returns the minimum flange width.
minimumFlangeWidth() - Method in interface nxopen.weld.EasyPatternBuilder
Returns the value used to control when only one surface measurement vector will be created.
minimumGapBetweenAnnotations() - Method in interface nxopen.drafting.AutomationRuleBuilder
Returns the minimum gap between annotations
License requirements: None.
minimumGapToGeometry() - Method in interface nxopen.drafting.AutomationRuleBuilder
Returns the minimum gap from the view geometry to the annotation
License requirements: None.
minimumGValue() - Method in interface nxopen.cae.responsesimulation.RSEventAttributes
Returns the Minimum G value
License requirements: None.
minimumHeelClearanceDistance() - Method in interface nxopen.cam.ToolAxisVariable
Returns the Minimum Heel Clearance Distance
License requirements: None.
minimumHeight() - Method in interface nxopen.blockstyler.ListBox
Returns the MinimumHeight
License requirements: None.
minimumHeight() - Method in interface nxopen.blockstyler.MultilineString
Returns the MinimumHeight
License requirements: None.
minimumHeight() - Method in interface nxopen.blockstyler.SetList
Returns the MinimumHeight
License requirements: None.
minimumHeight() - Method in interface nxopen.blockstyler.Tree
Returns the MinimumHeight
License requirements: None.
minimumHelixDiameter() - Method in interface nxopen.cam.CylinderMillingBuilder
Returns the Minimum Helix Diameter
License requirements: None.
minimumLeadAngle() - Method in interface nxopen.cam.InterpolateVector
Returns the minimum lead angle
License requirements: None.
minimumLeadAngle() - Method in interface nxopen.cam.ToolAxisAdvanced
Returns the minimum lead angle
License requirements: None.
minimumLeadAngle() - Method in interface nxopen.cam.ToolAxisVariable
Returns the Minimum the Lead Angle
License requirements: None.
minimumLevel() - Method in interface nxopen.cam.NCAssistantBuilder
Returns the Minimum Level
License requirements: None.
minimumLoopAngle() - Method in interface nxopen.cam.WedmGeomBuilder
Returns the minimum loop angle
License requirements: None.
minimumLoopAngle() - Method in interface nxopen.cam.WedmOperationBuilder
Returns the minimum loop angle
License requirements: None.
minimumMove() - Method in interface nxopen.cam.Cutcom
Returns the cutter compensation minimum move builder (inheritable tool dep)
License requirements: None.
minimumNegative() - Method in interface nxopen.die.AddendumSectionBuilder
Returns the minimum negative trim angle.
minimumNumberOfAttributeGroupsAllowed() - Method in interface nxopen.pdm.AttributeGroupDescription
Returns the minimum number of attribute groups of this type that can be assigned to an object.
minimumoffset - Variable in class nxopen.display.DynamicSectionBuilder.OffsetLimitsData
Minimum offset
minimumPercentBuilder() - Method in interface nxopen.cam.StepoverBuilder
Returns the minimum percent of remaining
License requirements: None.
minimumPitch() - Method in interface nxopen.drawings.CustomViewSettingsBuilder
Returns the minimum pitch
License requirements: None.
minimumPitchField() - Method in interface nxopen.drawings.ThreadsViewStyle
Returns the minimum pitch field.
minimumPitchField() - Method in interface nxopen.preferences.ThreadsViewPreferences
Returns the minimum pitch field.
minimumPitchFieldData() - Method in interface nxopen.drawings.ViewStyleThreadsBuilder
Returns the minimum pitch field on the THREADS tab of the View Style Dialog
License requirements: None.
minimumPosition() - Method in interface nxopen.mechatronics.AngularLimitJointBuilder
Returns the minimum position:
The minimum allowable angle, stops objects moving too close together.
minimumPosition() - Method in interface nxopen.mechatronics.LinearLimitJointBuilder
Returns the minimum position.
minimumRadius() - Method in interface nxopen.cam.NCAssistantBuilder
Returns the Minimum Radius
License requirements: None.
minimumRadius() - Method in interface nxopen.die.AddendumSectionBuilder
Returns the minimum radius.
minimumRadius() - Method in interface nxopen.features.AestheticFaceBlendBuilder
Returns the min radius
License requirements: None.
minimumRadiusOption() - Method in interface nxopen.features.BridgeCurveBuilder
minimumRadiusValue() - Method in interface nxopen.features.BridgeCurveBuilder
minimumRandomAngle() - Method in interface nxopen.formboard.FormboardLayoutBuilder
Returns the minimum random angle.
minimumRibHeight() - Method in interface nxopen.die.KeywayBuilder
Returns the expression for the minimum rib height
License requirements: None.
minimumRibHeight() - Method in interface nxopen.die.KeywayChildBuilder
Returns the minimum rib height of the keyway.
minimumRibHeight() - Method in interface nxopen.die.KeywayParentBuilder
Returns the minimum rib height of keyways.
minimumSizeAxial() - Method in interface nxopen.cam.RoughFinishTurningBuilder
Returns the Minimum Size Axial
License requirements: None.
minimumSizeMode() - Method in interface nxopen.cam.RoughFinishTurningBuilder
Returns the Minimum Size Mode
License requirements: None.
minimumSizeRadial() - Method in interface nxopen.cam.RoughFinishTurningBuilder
Returns the Minimum Size Radial
License requirements: None.
minimumSmallEdgeLength() - Method in interface nxopen.preferences.SessionNXGateway
Returns the minimum small edge length.
minimumSpaceSize() - Method in interface nxopen.tooling.BlankLayoutBuilder
Returns the option to report minimum space size or not.
minimumSpaceSizeValue() - Method in interface nxopen.tooling.BlankLayoutBuilder
Returns the minimum distance between the adjacent blanks.
minimumSpacingBetweenPoints() - Method in interface nxopen.weld.AutoPointBuilder
Returns the minimum spacing between points
License requirements: None.
minimumStraightLength() - Method in interface nxopen.routing.QuickPathBuilder
Returns the minimum straight length value.
minimumSubtendedAngle() - Method in interface nxopen.features.AestheticFaceBlendBuilder
Returns the minimum subtended angle
License requirements: None.
minimumThickness() - Method in interface nxopen.cae.optimization.TBSTopologyRestrictAreaBuilder
Returns the minimum thickness of the structure
License requirements: None.
minimumTiltAngle() - Method in interface nxopen.cam.ToolAxisVariable
Returns the Minimum Tilt Angle
License requirements: None.
minimumToolClearance() - Method in interface nxopen.features.sheetmetal.BeadBuilder
Returns
the Minimum tool clearance expression.
minimumToolClearance() - Method in interface nxopen.features.sheetmetal.DimpleBuilder
Returns
the minimum tool clearance expression.
minimumToolClearance() - Method in interface nxopen.features.sheetmetal.DrawnCutoutBuilder
Returns
the minimum tool clearance expression.
minimumToolClearance() - Method in interface nxopen.features.sheetmetal.LouverBuilder
Returns
the minimum tool clearance expression.
minimumTrimLedge() - Method in interface nxopen.die.AddendumSectionBuilder
Returns the minimum trim ledge.
minimumValue() - Method in interface nxopen.blockstyler.AngularDimension
Returns the MinimumValue
License requirements: None.
minimumValue() - Method in interface nxopen.blockstyler.DoubleBlock
Returns the MinimumValue
License requirements: None.
minimumValue() - Method in interface nxopen.blockstyler.ExpressionBlock
Returns the MinimumValue
License requirements: None.
minimumValue() - Method in interface nxopen.blockstyler.IntegerBlock
Returns the MinimumValue
License requirements: None.
minimumValue() - Method in interface nxopen.blockstyler.LinearDimension
Returns the MinimumValue
License requirements: None.
minimumValue() - Method in interface nxopen.blockstyler.OnPathDimension
Returns the MinimumValue
License requirements: None.
minimumValue() - Method in interface nxopen.blockstyler.RadiusDimension
Returns the MinimumValue
License requirements: None.
minimumValue - Variable in class nxopen.fields.FieldVariable.Bounds
minimum bound value
minInclusive() - Method in interface nxopen.blockstyler.AngularDimension
Returns the MinInclusive
License requirements: None.
minInclusive() - Method in interface nxopen.blockstyler.DoubleBlock
Returns the MinInclusive
License requirements: None.
minInclusive() - Method in interface nxopen.blockstyler.ExpressionBlock
Returns the MinInclusive
License requirements: None.
minInclusive() - Method in interface nxopen.blockstyler.IntegerBlock
Returns the MinInclusive
License requirements: None.
minInclusive() - Method in interface nxopen.blockstyler.LinearDimension
Returns the MinInclusive
License requirements: None.
minInclusive() - Method in interface nxopen.blockstyler.OnPathDimension
Returns the MinInclusive
License requirements: None.
minInclusive() - Method in interface nxopen.blockstyler.RadiusDimension
Returns the MinInclusive
License requirements: None.
minInteger() - Method in interface nxopen.AttributeTemplatesBuilder
Returns the min integer.
minLabel() - Method in interface nxopen.cae.LaminateRelabelPliesBuilder
Returns the start label for the label and increment option
License requirements: None.
minMaterialThickness() - Method in interface nxopen.cam.MillCutParameters
Returns the minimum material thickness
License requirements: None.
MINMAX - Static variable in class nxopen.geometricanalysis.DeviationGaugeBuilder.MinMaxType
Minimum/Maximum
minMaxOption() - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder
Returns the min_max type
License requirements: studio_free_form ("STUDIO FREE FORM")
.
minMeanRange() - Method in interface nxopen.cae.DurabilityDamageEvaluationBuilder
Returns the min mean range
License requirements: None.
minNeckClearance() - Method in interface nxopen.cam.ToolPathTiltBuilder
minNeckClearance() - Method in interface nxopen.cam.ToolPathTiltClearance
Returns the minimum neck clearance
License requirements: None.
minNumber() - Method in interface nxopen.AttributeTemplatesBuilder
Returns the min number.
minor - Variable in class nxopen.uf.UFEval.Ellipse
MINOR_ANGULAR_DIM - Static variable in class nxopen.Sketch.ConstraintType
MINOR_AXIS - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.ParamXYZAxis
Minor Axis
MINOR_DIAMETER - Static variable in class nxopen.annotations.HoleCalloutSettingsBuilder.Parametertype
MinorAngularDimension - Interface in nxopen.annotations
MinorAngularDimensionBuilder - Interface in nxopen.annotations
minorDia - Variable in class nxopen.uf.UFModl.SymbThreadData
minorDiameter() - Method in interface nxopen.cam.HoleBossSet
Returns the Minor Diameter
License requirements: None.
minorDiameter - Variable in class nxopen.uf.UFModlGeneral.AskTorusParmsData
minorLinesPerMajor() - Method in interface nxopen.display.GridBuilder
Returns the minor lines per major
License requirements: None.
minorLinesPerMajor - Variable in class nxopen.preferences.WorkPlane.GridSize
Number of minor lines between major grid lines
minorLineStyle() - Method in interface nxopen.display.GridBuilder
Returns the minor line style
License requirements: None.
minorLineWeight() - Method in interface nxopen.display.GridBuilder
Returns the minor line weight
License requirements: None.
minorPoint() - Method in interface nxopen.SketchEllipseBuilder
Returns the point in minor axis to calculate the minor radius
License requirements: None.
minorRadius() - Method in interface nxopen.Ellipse
Returns the minor radius.
minorRadius - Variable in class nxopen.facet.FacetedEdge.CurveData
minorradius - Variable in class nxopen.markup.Ellipse.CenterAndRadiusData
minorRadius() - Method in interface nxopen.SketchEllipseBuilder
Returns the minor radius
License requirements: None.
minorRevision - Variable in class nxopen.uf.UFPs.KernelVersion
minpoint - Variable in class nxopen.assemblies.ClearanceSet.InterferenceData
the points on the interference region at the extremes of depth
minPower() - Method in interface nxopen.cam.LaserTool
Returns the Minimum Power
License requirements: None.
minRad() - Method in interface nxopen.tooling.ScrapDesignBuilder
Returns the minimum radius to blend sharp corners
License requirements: None.
minRadius() - Method in interface nxopen.blockstyler.AngularDimension
Returns the MinRadius
License requirements: None.
minradius - Variable in class nxopen.features.ConcaveFacesBuilder.CalculatePointCurvatureData
the minimum value of targeted face
minRampLength() - Method in interface nxopen.cam.MillingToolBuilder
Returns the min ramp length
License requirements: None.
minRampLengthBuilder() - Method in interface nxopen.cam.NcmPlanarEngRetBuilder
Returns the engage/retract minimum ramp length builder (inheritable tool dep)
License requirements: None.
minResult - Variable in class nxopen.uf.UFSf.GetExtremeValuesData
minSafeClearance() - Method in interface nxopen.cam.ToolPathTiltBuilder
minShankClearance() - Method in interface nxopen.cam.ToolPathTiltBuilder
minShankClearance() - Method in interface nxopen.cam.ToolPathTiltClearance
Returns the minimum shank clearance
License requirements: None.
minSimulationTime() - Method in interface nxopen.cam.SimulationOptionsBuilder
Returns the minimum simulation time
License requirements: None.
minSpacing() - Method in interface nxopen.cam.InspectionMethodBuilder
Returns the minimum spacing between scan points
License requirements: None.
minSpacing() - Method in interface nxopen.cam.InspectionScanCurve5AxisBuilder
Returns the Minimum Spacing of points along the Scan Curve
License requirements: None.
minSpacing() - Method in interface nxopen.cam.InspectionScanCurveBuilder
Returns the Minimum Spacing of points along the Scan Curve
License requirements: None.
minString() - Method in interface nxopen.AttributeTemplatesBuilder
Returns the min string.
minsubid - Variable in class nxopen.cae.ResultAccess.AskMinMaxLocationData
minsubid - Variable in class nxopen.cae.ResultAccess.AskNMinMaxLocationData
minThickness() - Method in interface nxopen.features.MidSurfaceUserDefinedBuilder
Returns the min element thickness allowed during Fem solve
License requirements: None.
minTiltAngle() - Method in interface nxopen.cam.ToolPathTiltMachine
Returns the minimum tilt angle
License requirements: None.
minToggle() - Method in interface nxopen.cam.InspectionCmmCommandBuilder
Returns the min toggle
License requirements: None.
minToolAxisChange() - Method in interface nxopen.cam.ToolAxisChange
Returns the minimum tool axis change
License requirements: None.
minToolLen(CAMObject[]) - Method in interface nxopen.cam.CAMSetup
Minimum tool length
License requirements: cam_base ("CAM BASE")
.
minTraverseDistance() - Method in interface nxopen.cam.AcrossVoids
Returns the minimum traversal distance
License requirements: cam_base ("CAM BASE")
.
MINUS - Static variable in class nxopen.features.shipdesign.DeckListItemBuilder.DatumDir
MINUS_LIMIT2LINES - Static variable in class nxopen.annotations.SearchCriteriaSurfaceFinishBuilder.ToleranceTypeOptions
- limit 2 lines
MINUS_LIMIT_ONE_LINE - Static variable in class nxopen.annotations.BaseSurfaceFinishBuilder.ToleranceOption
Minus limit one line
MINUS_LIMIT_ONE_LINE - Static variable in class nxopen.annotations.SearchCriteriaDimensionBuilder.ToleranceTypes
MinusLimitOneLine
MINUS_LIMIT_TWO_LINES - Static variable in class nxopen.annotations.BaseSurfaceFinishBuilder.ToleranceOption
Minus limit two lines
MINUS_LIMIT_TWO_LINES - Static variable in class nxopen.annotations.SearchCriteriaDimensionBuilder.ToleranceTypes
MinusLimitTwoLines
MINUS_OVER_PLUS - Static variable in class nxopen.uf.UFGdt.TolFormat
minute - Variable in class nxopen.NXObject.ComputationalTime
minute - Variable in class nxopen.uf.UFPs.KernelVersion
minValue() - Method in interface nxopen.cam.InspectionCmmCommandBuilder
Returns the min value
License requirements: None.
minValue - Variable in class nxopen.uf.UFDrf.CustomSymbolText
minWeight - Variable in class nxopen.uf.UFWeight.AskPartMinWeightData
minWidth() - Method in interface nxopen.cam.TrochoidalSettings
Returns the path min width distance
License requirements: None.
MIRROR - Static variable in class nxopen.features.GeomcopyBuilder.TransformTypes
mirror about a plane
Mirror - Interface in nxopen.features
Represents a mirror feature
To create or edit an instance of this class, use
MirrorBuilder
Created in NX8.0.1
MIRROR - Static variable in class nxopen.features.PatternFaceBuilder.PatternTypes
This stands for mirror pattern type.
MIRROR - Static variable in class nxopen.geometricutilities.PatternDefinition.PatternEnum
mirror pattern.
MIRROR - Static variable in class nxopen.partfamily.FamilyAttribute.AttrType
mirror attribute
MIRROR - Static variable in class nxopen.Sketch.ConstraintType
MIRROR - Static variable in class nxopen.SketchPattern.Type
The pattern type is mirror pattern
MIRROR - Static variable in class nxopen.tooling.ElectrodeCopyBuilder.Copy
the method is mirror
mirror(double[], double[]) - Method in interface nxopen.uf.UFMtx4
MIRROR - Static variable in class nxopen.uf.UFSket.ConType
MIRROR - Static variable in class nxopen.weld.DatumSurfaceBuilder.Types
mirror location
MIRROR - Static variable in class nxopen.weld.JointmarkBuilder.Method
Mirror
MIRROR - Static variable in class nxopen.weld.WeldPointExitBuilder.MethodUsed
Feature was created using the mirror method.
MIRROR - Static variable in class nxopen.weld.WeldPointMethod
mirror existing points
MIRROR_BODY_LINK - Static variable in class nxopen.features.WaveLinkBuilder.Types
MIRROR_THROUGH_ALINE - Static variable in class nxopen.cam.InspectionOperationTransformBuilder.Transform
mirror through a line
MIRROR_THROUGH_ALINE - Static variable in class nxopen.cam.OperationTransformBuilder.Transform
mirror through a line
MIRROR_THROUGH_APLANE - Static variable in class nxopen.cam.InspectionOperationTransformBuilder.Transform
mirror through a plane
MIRROR_THROUGH_APLANE - Static variable in class nxopen.cam.OperationTransformBuilder.Transform
mirror through a plane
MIRROR_TO_TARGET - Static variable in class nxopen.features.vehicledesign.MirrorCertificationBuilder.ShowVisionConeType
Represents only Mirror-Target vision cone is shown
MIRROR_TYPE - Static variable in class nxopen.Part.PartFamilyAttrType
Deprecated.
mirror attribute
MIRROR_XAND_Y - Static variable in class nxopen.features.GeomcopyBuilder.CsysMirrorOptions
Mirror X and Y and derive Z
MIRROR_XAND_Y - Static variable in class nxopen.features.MirrorBuilder.CsysMirrorOptions
Mirror X and Y and derive Z
MIRROR_XYAND_DERIVE_Z - Static variable in class nxopen.LinkedMirrorPartBuilder.MirrorCsysOption
MIRROR_XZAND_DERIVE_Y - Static variable in class nxopen.LinkedMirrorPartBuilder.MirrorCsysOption
MIRROR_YAND_Z - Static variable in class nxopen.features.GeomcopyBuilder.CsysMirrorOptions
Mirror Y and Z and derive X
MIRROR_YAND_Z - Static variable in class nxopen.features.MirrorBuilder.CsysMirrorOptions
Mirror Y and Z and derive X
MIRROR_YZAND_DERIVE_X - Static variable in class nxopen.LinkedMirrorPartBuilder.MirrorCsysOption
MIRROR_ZAND_X - Static variable in class nxopen.features.GeomcopyBuilder.CsysMirrorOptions
Mirror X and Z and derive Y
MIRROR_ZAND_X - Static variable in class nxopen.features.MirrorBuilder.CsysMirrorOptions
Mirror X and Z and derive Y
MirrorBody - Interface in nxopen.features
Represents a mirror body feature
To create or edit an instance of this class, use
MirrorBodyBuilder
Created in NX5.0.0
MirrorBodyBuilder - Interface in nxopen.features
mirrorBodyBuilder() - Method in interface nxopen.features.WaveLinkBuilder
Returns the mirrorbodybuilder
License requirements: None.
MirrorBodyBuilder.FeatureOptionType - Class in nxopen.features
enum for feature option type
MirrorBodyBuilder.ParentPart - Class in nxopen.features
the parent part types
MirrorBodyBuilder.WaveLinkInformationData - Class in nxopen.features
mirrorBodyCollector() - Method in interface nxopen.features.MirrorBodyBuilder
Returns a collection of bodies to mirror
License requirements: None.
mirrorBodyList() - Method in interface nxopen.features.MirrorBodyBuilder
mirrorBoundary() - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder
Returns the curves selection used to identify the mirror boundary section.
MirrorBuilder - Interface in nxopen.features
MirrorBuilder.CsysMirrorOptions - Class in nxopen.features
the Coordinate System mirror options
mirrorByType() - Method in interface nxopen.weld.WeldPointBuilder
Returns the mirror by type
License requirements: ugweld ("UG WELD")
.
MirrorCertification - Interface in nxopen.features.vehicledesign
Represents a mirror certification feature.
MirrorCertificationBuilder - Interface in nxopen.features.vehicledesign
MirrorCertificationBuilder.DriverSideStandardsType - Class in nxopen.features.vehicledesign
Used to indicate the standard for the driver mirror.
MirrorCertificationBuilder.EyeFromOptionType - Class in nxopen.features.vehicledesign
Used to indicate what part the eye is from.
MirrorCertificationBuilder.EyellipsePercentileType - Class in nxopen.features.vehicledesign
Used to indicate the eyellipse percentile that is used in mirror certification.
MirrorCertificationBuilder.EyeMethodType - Class in nxopen.features.vehicledesign
Used to indicate the method to calculate the eye location based on the distance from the eyellipse to the mirror pivot.
MirrorCertificationBuilder.EyePointMethodType - Class in nxopen.features.vehicledesign
Used to indicate the method to define the eye point.
MirrorCertificationBuilder.InsideStandardsType - Class in nxopen.features.vehicledesign
Used to indicate the standard for the inside mirror.
MirrorCertificationBuilder.InstructionFieldPositionType - Class in nxopen.features.vehicledesign
Used to indicate the postion where the instruction field will be.
MirrorCertificationBuilder.InstructionFieldsType - Class in nxopen.features.vehicledesign
Used to indicate the shape type of the instruction field.
MirrorCertificationBuilder.LocationType - Class in nxopen.features.vehicledesign
Used to indicate the mirror location.
MirrorCertificationBuilder.MirrorOrientationType - Class in nxopen.features.vehicledesign
Used to indicate the method to rotate mirror.
MirrorCertificationBuilder.MirrorSurfaceType - Class in nxopen.features.vehicledesign
Used to indicate the mirror surface type.
MirrorCertificationBuilder.PassengerSideStandardsType - Class in nxopen.features.vehicledesign
Used to indicate the standard for the passenger mirror.
MirrorCertificationBuilder.ShowVisionConeType - Class in nxopen.features.vehicledesign
Used to indicate what vision cone will be shown.
mirrorCsysMethod() - Method in interface nxopen.LinkedMirrorPartBuilder
Returns the method specifying how to mirror coordinate systems
License requirements: solid_modeling ("SOLIDS MODELING")
.
MirrorCurve - Interface in nxopen.features
Represents a mirror curve feature
To create or edit an instance of this class, use
MirrorCurveBuilder
Created in NX6.0.0
MirrorCurveBuilder - Interface in nxopen.features
MirrorCurveBuilder.PlaneOptions - Class in nxopen.features
Represents the Plane options.
mirrorDefinition() - Method in interface nxopen.geometricutilities.PatternDefinition
Returns the mirror definition.
MIRRORED - Static variable in class nxopen.features.TrimExtendBuilder.ExtensionMethods
Mirrored
mirrored - Variable in class nxopen.uf.UFDrf.AskSymbolMirrorAndFlipData
MirrorFace - Interface in nxopen.features
Represents a Mirror Face feature
To create or edit an instance of this class, use
MirrorFaceBuilder
Created in NX6.0.0
MirrorFaceBuilder - Interface in nxopen.features
MirrorFaceBuilder.MirrorPlaneOptions - Class in nxopen.features
Represents the mirror plane options
mirrorFaces() - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder
Returns the faces selection used to identify the mirror surfaces.
mirrorFaces() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
mirrorObjects(DisplayableObject, SmartObject[]) - Method in interface nxopen.Sketch
mirrorObjects(Tag, Tag, int, Tag[]) - Method in interface nxopen.uf.UFSket
MirrorObjectsData() - Constructor for class nxopen.uf.UFSket.MirrorObjectsData
mirrorOrientation() - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder
Returns the mirror orientation method.
mirrorOrientationOption() - Method in interface nxopen.geometricutilities.PatternOrientation
Returns the orientationOption for Mirror pattern type
License requirements: None.
mirrorPart() - Method in interface nxopen.LinkedMirrorPartAttributeEditData
Returns the mirror part
License requirements: None.
mirrorPartName() - Method in interface nxopen.LinkedMirrorPartBuilder
Returns the name of the new mirror part
License requirements: solid_modeling ("SOLIDS MODELING")
.
mirrorPartType() - Method in interface nxopen.LinkedMirrorPartBuilder
Returns the type of mirror part which controls how the mirrored part responds to changes in source part
License requirements: solid_modeling ("SOLIDS MODELING")
.
MirrorPattern - Interface in nxopen.geometricutilities
the Mirror pattern definition.
MirrorPattern.PlaneOptions - Class in nxopen.geometricutilities
the Plane options.
mirrorPlane() - Method in interface nxopen.die.AddendumSectionBuilder
Returns the mirror plane.
mirrorPlane() - Method in interface nxopen.die.FillBuilder
Returns the plane to mirror the area fill about
License requirements: die_engineering ("DIE ENGINEERING")
.
mirrorPlane() - Method in interface nxopen.features.GeomcopyBuilder
Returns the mirror plane for mirror type of instancing.
mirrorPlane() - Method in interface nxopen.features.shipdesign.MirrorShipStructureBuilder
Returns the mirror plane.
mirrorPlane() - Method in interface nxopen.LinkedMirrorPartBuilder
Returns the plane about which the entities are mirrored
License requirements: solid_modeling ("SOLIDS MODELING")
.
mirrorPlane() - Method in interface nxopen.tooling.ElectrodeCopyBuilder
Returns the mirror plane
License requirements: None.
mirrorPlane - Variable in class nxopen.uf.UFModlFeatures.AskMirrorPatternFaceData
mirrorPlane() - Method in interface nxopen.weld.DatumSurfaceBuilder
Returns the plane used for mirroring a reference surface locator.
mirrorPlane() - Method in interface nxopen.weld.WeldPointBuilder
Returns the plane that a point is to be mirrored about.
MirrorPlaneDataOfMirrorPartData() - Constructor for class nxopen.PartCollection.MirrorPlaneDataOfMirrorPartData
mirrorplanedirection - Variable in class nxopen.PartCollection.MirrorPlaneDataOfMirrorPartData
mirror plane normal direction
mirrorPlaneNormal() - Method in interface nxopen.LinkedMirrorPartBuilder
Returns the normal of the mirror plane
License requirements: solid_modeling ("SOLIDS MODELING")
.
mirrorPlaneOption() - Method in interface nxopen.features.MirrorFaceBuilder
Returns the mirror plane option
License requirements: None.
mirrorPlaneOrigin() - Method in interface nxopen.LinkedMirrorPartBuilder
Returns the origin of the mirror plane
License requirements: solid_modeling ("SOLIDS MODELING")
.
mirrorplaneorigin - Variable in class nxopen.PartCollection.MirrorPlaneDataOfMirrorPartData
mirror plane origin
mirrorPmiFlag() - Method in interface nxopen.LinkedMirrorPartBuilder
Returns the option that determines if PMI entities will be mirrored
License requirements: None.
mirrorProcedureOptions() - Method in interface nxopen.features.subdivision.StartSymmetricModelingBuilder
mirrorProfile() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
Returns the option to specify whether or not the tire profile is to be mirrored.
mirrorRotationPoint() - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder
Returns the mirror rotation point specified.
mirrorRotationYAngle() - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder
Returns the mirror rotation angle around vehicle Y axis after Z axis.
mirrorRotationZAngle() - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder
Returns the mirror rotation angle around vehicle Z axis.
mirrorSections() - Method in interface nxopen.die.AddendumSectionBuilder
MirrorShipStructureBuilder - Interface in nxopen.features.shipdesign
Copy the selected parts (components) about the Mirror Plane with full model history and feature data.
mirrorSurface() - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder
Returns the face that represents the closed mirror profile.
mirrorTargetRestrictions() - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder
Returns the faces representing the restrictions between the mirror and the target plane.
mirrorType() - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder
Returns the mirror surface type, planar or spherical.
misalignedMode() - Method in interface nxopen.features.shipdesign.ProfileTransitionBuilder
Returns the misaligned mode used to create new Profile Transition features.
MISC - Static variable in class nxopen.layout2d.Layout2dComponentMemberType
misc() - Method in interface nxopen.UFSession
MISC_APPL_REASON - Static variable in class nxopen.uf.UFCgm.ExportReason
MISC_DATA_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
MISC_DATA_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
MISC_OTHERS - Static variable in class nxopen.layout2d.Layout2dComponentMemberType
MISES_STRESS_HYPOTHESIS - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
Mises Stress hypothesis
MISSING - Static variable in class nxopen.formboard.UpdateDiscrepancy.Type
Object exits in the 3D harness but is
missing from the formboard.
MISSING - Static variable in class nxopen.layout2d.Layout2dDefinitionStatus
MISSING_ITEM - Static variable in class nxopen.routing.Run.CompareStatus
Item or items are missing from the run
MISSING_RUN - Static variable in class nxopen.routing.Run.CompareStatus
Entire run is missing
MITER - Static variable in class nxopen.preferences.RoutingPath.AllowedCornerType
UF_ROUTE_AV_CORNERS_MITER
MITER - Static variable in class nxopen.preferences.RoutingPath.DefaultCornerType
Miter Corner
MITER - Static variable in class nxopen.routing.Corner.Type
Miter corner.
MITER - Static variable in class nxopen.routing.CornerTypeBuilder.Type
miterAngle() - Method in interface nxopen.features.sheetmetal.HemFlangeBuilder
Returns the miter angle
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
miterCorner() - Method in interface nxopen.features.sheetmetal.ClosedCornerBuilder
Returns the corner will be closed using the miter algorithm.
miterCorner() - Method in interface nxopen.features.sheetmetal.ThreeBendCornerBuilder
Returns whether the corner will be closed using miter.
MiterCorner - Interface in nxopen.routing
This class defines a mitered corner.
MiterCornerCollection - Interface in nxopen.routing
miterCorners() - Method in interface nxopen.routing.RouteManager
MiterCorner collection .
MITERED_BEND - Static variable in class nxopen.routing.CornerTypeBuilder.Type
MiteredBendCorner - Interface in nxopen.routing
Computes a fillet curve between two linear segments to form a smooth
bend transition from one segment to another that represents a mitered bend.
MiteredBendCornerCollection - Interface in nxopen.routing
miteredBendCorners() - Method in interface nxopen.routing.RouteManager
MiteredBendCorner collection .
miterInteriorCornersIfNecessary() - Method in interface nxopen.features.sheetmetal.MiterOptions
Returns the miter_corners option.If set to true, it miter bend edges that are larger than default bend radius.
miterOption() - Method in interface nxopen.features.LawExtensionBuilderEx
Returns the miter option
License requirements: None.
miterOptions() - Method in interface nxopen.features.sheetmetal.ContourFlangeBuilder
Returns the miter options
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
MiterOptions - Interface in nxopen.features.sheetmetal
Represents a Miter Data Options builder.
MiterOptions.ClosedCornerTypeOptions - Class in nxopen.features.sheetmetal
the closed corner type options.
MiterOptions.PositionOptions - Class in nxopen.features.sheetmetal
the miter positions options.
MiterOptions.TypeOptions - Class in nxopen.features.sheetmetal
the miter type options.
miterRadius() - Method in interface nxopen.features.LawExtensionBuilderEx
Returns the miter radius
License requirements: None.
miterRootRadius() - Method in interface nxopen.features.sheetmetal.ThreeBendCornerBuilder
Returns the miter root radius used for three bend corner miter treatment.
miterToggle - Variable in class nxopen.uf.UFModl.SmcornerData
mitreAngleAtEnd - Variable in class nxopen.uf.UFNxsm.MitreCflangeData
mitreAngleAtStart - Variable in class nxopen.uf.UFNxsm.MitreCflangeData
mitreByDistOrAngleAtEnd - Variable in class nxopen.uf.UFNxsm.MitreCflangeData
mitreByDistOrAngleAtStart - Variable in class nxopen.uf.UFNxsm.MitreCflangeData
MitreCflangeData() - Constructor for class nxopen.uf.UFNxsm.MitreCflangeData
MitreCflangeData(UFNxsm.FeaturePropertyConstants, UFNxsm.FeaturePropertyConstants, UFNxsm.FeaturePropertyConstants, UFNxsm.FeaturePropertyConstants, UFNxsm.FeaturePropertyConstants, UFNxsm.FeaturePropertyConstants, UFNxsm.FeaturePropertyConstants, String, String, UFNxsm.FeaturePropertyConstants, UFNxsm.FeaturePropertyConstants, String) - Constructor for class nxopen.uf.UFNxsm.MitreCflangeData
mitreCutType - Variable in class nxopen.uf.UFNxsm.MitreCflangeData
mitreData - Variable in class nxopen.uf.UFNxsm.BaseCflangeData
mitreData - Variable in class nxopen.uf.UFNxsm.SecCflangeData
mitrePosition - Variable in class nxopen.uf.UFNxsm.MitreCflangeData
mitreSideAtEnd - Variable in class nxopen.uf.UFNxsm.MitreCflangeData
mitreSideAtStart - Variable in class nxopen.uf.UFNxsm.MitreCflangeData
mitreTypeAtEnd - Variable in class nxopen.uf.UFNxsm.MitreCflangeData
mitreTypeAtStart - Variable in class nxopen.uf.UFNxsm.MitreCflangeData
MIX - Static variable in class nxopen.Part.Relations
support any one of relation
MIX - Static variable in class nxopen.Part.Units
MIXED - Static variable in class nxopen.assemblies.AssembliesGeneralPropertiesBuilder.HiddenOptions
Objects hidden properties differ and will not change
MIXED - Static variable in class nxopen.assemblies.AssembliesGeneralPropertiesBuilder.LayerOptions
Objects are on different layers and will not be changed
MIXED - Static variable in class nxopen.assemblies.AssembliesGeneralPropertiesBuilder.ReferenceComponentOptions
Objects are a mixture of reference-only and non reference-only components, and will not be changed
MIXED - Static variable in class nxopen.assemblies.AssembliesParameterPropertiesBuilder.ArrangementOptions
All components are neither varied nor unvaried
MIXED - Static variable in class nxopen.cae.ElementModifyOrderBuilder.Midnode
mixed midnodes
MIXED - Static variable in class nxopen.cae.ElementTypes.Order
Mixed
MIXED - Static variable in class nxopen.cae.MappedMeshBuilder.MidNodeType
Mixed Option
MIXED - Static variable in class nxopen.cam.CutPatternBuilder.Types
Mixed
MIXED - Static variable in class nxopen.cam.CutRegionsBuilder.CutRegionsContainmentTypes
Mixed
MIXED - Static variable in class nxopen.cam.DmRotaryFloorFinishBuilder.CutDirType
mixed
MIXED - Static variable in class nxopen.cam.FlowCutSteepContainment.CutDirectionTypes
Mixed
MIXED - Static variable in class nxopen.cam.FlowCutSteepContainment.SteepCutDirectionTypes
Mixed
MIXED - Static variable in class nxopen.features.EmbossRegion.ConvexityOption
Indicates the emboss geometry is both above and below the Target("Mixed").
MIXED - Static variable in class nxopen.geometricutilities.ParentEquivalencyMap.Type
combination of multiple methods
MIXED - Static variable in class nxopen.MassPropertiesBuilder.UpdateOptions
The Update on Save property will not change for the selected objects.
MIXED - Static variable in class nxopen.mechatronics.PositionControlBuilder.Axis
Mix angular and linear
MIXED - Static variable in class nxopen.mechatronics.SpeedControlBuilder.AxisJointType
Mix angular and linear
MIXED - Static variable in class nxopen.routing.electrical.ElectricalStockDevice.RouteLevel
MIXED - Static variable in class nxopen.SmartObject.UpdateOption
Updates after parent body for inter-part parents and updates within modeling for same part parents
MIXED - Static variable in class nxopen.tooling.LsdynaKfileGeneratorBuilder.MeshElementType
Mixed element of triangle and quadrangle
mixedMesh() - Method in interface nxopen.cae.optimization.TBSSmoothBuilder
Returns the choice whether to form quardrilaterals from adjacent triangles
License requirements: None.
MM - Static variable in class nxopen.cae.PreTestExportUnvBuilder.FileUnitsOption
MM: mm (milli newton)
MM - Static variable in class nxopen.cae.xyplot.UnitSystem
Millimeter unit
MM - Static variable in class nxopen.display.StudioImageCaptureBuilder.UnitsEnumType
Use Millimeters to define resolution
MM - Static variable in class nxopen.HumanData.StatureUnitType
Indicate mm for stature
MM_FREE - Static variable in class nxopen.uf.UFSf.ElementType
MM_GLUE - Static variable in class nxopen.uf.UFSf.ElementType
MMC - Static variable in class nxopen.annotations.MaterialConditionModifier
Specifies maximum material condition modifier
mmc() - Method in interface nxopen.cae.MMCCreateBuilder
Returns the Mesh Mating Condition
License requirements: None.
MMC - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.ParamPriDatumModifier
Maximum Material Condition
MMC - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.ParamSecDatumModifier
Maximum Material Condition
MMC - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.ParamTerDatumModifier
Maximum Material Condition
MMC - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.ParamTolMatModifier
Maximum Material Condition
MMC - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.ParamTolMatModifierDup
Maximum Material Condition
MMC - Static variable in class nxopen.DisplayManager.ShowHideType
Show or hide all mesh mating conditions.
MMC - Static variable in class nxopen.uf.UFGdt.MaterialModifier
MMCCreateBuilder - Interface in nxopen.cae
MMCCreateBuilder.FaceSearchType - Class in nxopen.cae
Types of Face Serach Operations
MMCCreateBuilder.MeshMatingType - Class in nxopen.cae
Types of Mesh Mating Conditions
MMCCreateBuilder.Types - Class in nxopen.cae
Type of the Creation Methods for MMC
MMDDYYYY - Static variable in class nxopen.annotations.TableCellStyleBuilder.DateFormatTypes
MMETER - Static variable in class nxopen.uf.UFModl.Units
MMMYYYY - Static variable in class nxopen.annotations.TableCellStyleBuilder.DateFormatTypes
MN - Static variable in class nxopen.cae.PreTestExportUnvBuilder.FileUnitsOption
MN: mm (newton)
MN - Static variable in class nxopen.cae.xyplot.UnitSystem
Milliforce unit
mobileObjects() - Method in interface nxopen.facet.BestFitAlignBuilder
Returns the mobile objects
License requirements: None.
MOBILITY - Static variable in class nxopen.cae.responsesimulation.EvaluationResultType
MOD - Static variable in class nxopen.cam.LaserControlPoint.ControlPointTypes
mod
MODAL - Static variable in class nxopen.cae.Post.AnimationStyle
MODAL_CONTRIBUTION - Static variable in class nxopen.cae.responsesimulation.FrequencyDefinition.Definition
MODAL_RESPONSE - Static variable in class nxopen.cae.responsesimulation.RSEvent.ResultFileType
Result file to be used as Restart File, which extension is ".eef" or ".sef"
ModalProperties - Interface in nxopen.cae.responsesimulation
Represents the modal presentation of a response analysis meta solution .
ModalResultsEvaluationSetting - Interface in nxopen.cae.responsesimulation
Represents the abstract class of evaluation setting for FRF and transmissibility
This is an abstract class, and cannot be created.
ModalResultsEvaluationSettingBuilder - Interface in nxopen.cae.responsesimulation
Represents the abstract builder class of evaluation setting for FRF and transmissibility
This is an abstract class, and cannot be created.
mode() - Method in interface nxopen.AutomaticTraceline
Returns the mode of the traceline
License requirements: assemblies ("ASSEMBLIES MODULE")
.
mode() - Method in interface nxopen.blockstyler.PropertyList
Returns the mode of the list.
MODE - Static variable in class nxopen.cae.BaseIteration.IterationType
Modal Analysis Iteration
mode() - Method in interface nxopen.cam.BoundaryTurnMemberOffset
Returns the offset mode
License requirements: None.
mode() - Method in interface nxopen.cam.DriveMode
Returns the Drive Mode Type
License requirements: None.
mode() - Method in interface nxopen.cam.InitialProfilePlunge
Returns the initial profile plunge mode
License requirements: None.
mode() - Method in interface nxopen.cam.LowerLimit
Returns the Lower Limit Mode
License requirements: None.
mode() - Method in interface nxopen.cam.ReliefCut
Returns the relief cut mode
License requirements: None.
mode() - Method in interface nxopen.cam.TurnRoughFinishLocalReturnBuilder
Returns the local return type
License requirements: None.
mode() - Method in interface nxopen.drawings.AddRemoveBoxViewBuilder
Returns the mode type
License requirements: None.
mode() - Method in interface nxopen.features.subdivision.SubdivisionProjectCageBuilder
Returns the mode
License requirements: None.
mode() - Method in interface nxopen.motion.AnimationControl
Returns the animation mode
License requirements: mechanisms ("MECHANISMS")
.
mode() - Method in interface nxopen.motion.GraphBuilder
Returns the mode id
License requirements: mechanisms ("MECHANISMS")
.
mode() - Method in interface nxopen.PropertyContainer
Returns the mode of the list
License requirements: None.
mode - Variable in class nxopen.uf.UFCgm.Size
mode - Variable in class nxopen.uf.UFClone.ValidationOpts
mode - Variable in class nxopen.uf.UFPath.SpindleOn
mode - Variable in class nxopen.uf.UFRoute.DesignRuleData
mode - Variable in class nxopen.uf.UFUi.AskIwDecimalPlacesData
mode - Variable in class nxopen.uf.UFUi.PointSubfunctionData
mode - Variable in class nxopen.uf.UFUi.SpecifyPlaneData
mode - Variable in class nxopen.uf.UFUi.SpecifyVectorData
MODE3AXIS - Static variable in class nxopen.cam.InspectionMethodBuilder.ScanModeTypes
3-axis mode
MODE5AXIS - Static variable in class nxopen.cam.InspectionMethodBuilder.ScanModeTypes
5-axis mode
MODE_ACCELERATION - Static variable in class nxopen.cae.responsesimulation.RSEvent.AnalysisType
MODE_DISPLACEMENT - Static variable in class nxopen.cae.responsesimulation.RSEvent.AnalysisType
MODE_SHAPES - Static variable in class nxopen.cae.ModelUpdateSolution.TargetType
Export all the mode shape targets to the csv file
modeId() - Method in interface nxopen.motion.NormalModeProperty
Returns the mode ID
License requirements: mechanisms ("MECHANISMS")
.
ModeInitialData - Interface in nxopen.cae.responsesimulation
Represents the initial setting for a normal mode .
MODEL - Static variable in class nxopen.assemblies.CreateNewComponentBuilder.ComponentReferenceSetType
Set the reference set to model
MODEL - Static variable in class nxopen.assemblies.DesignElementBuilder.ReferenceSetType
Model
MODEL - Static variable in class nxopen.cae.Result.CoordinateSystemSource
identifies a coordinate system in the work part
MODEL - Static variable in class nxopen.cae.Result.DeformationScale
MODEL - Static variable in class nxopen.cae.xyplot.UnitSystem
Model unit
model() - Method in interface nxopen.routing.ModelTerminalsBuilder
The Model the selected Terminals
License requirements: routing_harness ("Routing Harness")
.
MODEL - Static variable in class nxopen.Sketch.UpdateLevel
Update the full model and the sketch
MODEL_AXIS_FEATURE - Static variable in class nxopen.uf.UFGdt.FeatureType
MODEL_DATA - Static variable in class nxopen.NXTo2dCreator.ExportDataOption
export model data only
MODEL_GRID - Static variable in class nxopen.uf.UFDisp.GridContext
MODEL_PLANE_FEATURE - Static variable in class nxopen.uf.UFGdt.FeatureType
MODEL_POINT - Static variable in class nxopen.drawings.ViewPlacementBuilder.Option
Align to the same point in the alignment view and the view being edited
MODEL_PROPERTIES - Static variable in class nxopen.tooling.MWMoldedPartValidationBuilder.CheckScope
model properties
MODEL_TYPE - Static variable in class nxopen.uf.UFView.Type
MODEL_VIEW - Static variable in class nxopen.annotations.PlaneBuilder.PlaneMethodType
Model view plane
MODEL_VIEW - Static variable in class nxopen.annotations.PmiDefaultPlane
MODEL_VIEW - Static variable in class nxopen.drawings.DraftingViewCollection.ViewCopyDetailOption
model view
MODEL_VIEW - Static variable in class nxopen.weld.WeldLabelBuilder.OrientationPlaneType
MODEL_VIEW - Static variable in class nxopen.weld.WeldPmiBuilder.OrientationPlaneType
modelAll() - Method in interface nxopen.routing.ModelTerminalsBuilder
The Model all the terminals
License requirements: routing_harness ("Routing Harness")
.
modelBasedAlwaysStart() - Method in interface nxopen.drawings.GeneralWorkFlowBuilder
Returns the option that indicates action to be taken after inserting a sheet with no views
License requirements: None.
modelBasedInsertSheet() - Method in interface nxopen.drawings.GeneralWorkFlowBuilder
Returns the flag indicating whether to automatically starts the insert sheet command when entering the drafting application if no drawing sheets exist
License requirements: None.
modelBasedProjectedView() - Method in interface nxopen.drawings.GeneralWorkFlowBuilder
Returns the flag indicating whether to automatically start the projected view command after inserting a model view.
modelBounds - Variable in class nxopen.uf.UFDisp.ComputeModelBoundsData
modelCheck() - Method in interface nxopen.cae.DurabilityEventSolverBuilder
Returns the model check.
modelCheck() - Method in interface nxopen.cae.DurabilitySolverBuilder
Returns the model check.
modelCheck(boolean) - Method in interface nxopen.motion.MotionMethods
Check all motion objects
License requirements: mechanisms ("MECHANISMS")
.
ModelCheckManager - Interface in nxopen.cae
Provides method for creating builder for
node element operation commands in a fem part
To obtain an instance of this class, refer to
CaePart
Created in NX5.0.0
ModelCheckManager.CheckModelConsistencyData - Class in nxopen.cae
modelCheckMgr() - Method in interface nxopen.cae.CaePart
Returns the select element manager belonging to this IFem .
modelCompare(Tag, Tag, double[], Tag, Tag, double[], boolean, UFModl.CompareAccuracy, double, UFModl.CompareIdenticalfaceRule, UFModl.CompareChangeduniquefaceRule, boolean) - Method in interface nxopen.uf.UFModl
modelCompare2(Tag, Tag, double[], Tag, Tag, double[], UFModl.CompareOptions) - Method in interface nxopen.uf.UFModl
modelCompare3(Tag, Tag, double[], Tag, Tag, double[], UFModl.CompareOptions) - Method in interface nxopen.uf.UFModl
modelConnectionPostPlacementGasket(Component, PortConnection, ReuseLibrary.ReportInBom, CharacteristicList) - Method in interface nxopen.routing.RouteManager
ModelConnectionPostPlacementGasketData() - Constructor for class nxopen.routing.RouteManager.ModelConnectionPostPlacementGasketData
modelConnectionPostPlacementWeldGap(Component, PortConnection, double) - Method in interface nxopen.routing.RouteManager
Places a weld gap by adding a weld gap characteristic to one of the part occurrences connected.
modelDepthType() - Method in interface nxopen.cam.HoleMakingBuilder
Returns the model depth type
License requirements: None.
ModelDisplayBuilder - Interface in nxopen.cae
ModelDisplayBuilder.ElemQualPass - Class in nxopen.cae
specifies display style for elements which pass the element quality check
ModelDisplayBuilder.ElmClrBasis - Class in nxopen.cae
Indicates element color basis.
ModelDisplayBuilder.ElmDispQuality - Class in nxopen.cae
Indicates element display quality.
ModelDisplayBuilder.FreeEdgeFont - Class in nxopen.cae
specifies the object font for geometry free edges .
ModelDisplayBuilder.FreeEdgeMarker - Class in nxopen.cae
specifies the marker for endpoints of geometry free edges .
ModelDisplayBuilder.FreeEdgeWidth - Class in nxopen.cae
specifies object width for display for geometry free edges .
ModelDisplayBuilder.NodeDisplayModeType - Class in nxopen.cae
Indicates node display mode type.
ModelDisplayBuilder.NodeMarkerType - Class in nxopen.cae
Indicates node marker display symbol type.
ModelDisplayBuilder.NodeMeshShowHideOptionType - Class in nxopen.cae
Indicates which nodes to include for meshes in show and hide commands.
ModelDisplayBuilder.NodeUnattachedMarkerType - Class in nxopen.cae
Indicates unattached node marker display symbol type.
ModelDisplayBuilder.StitchedEdgeFont - Class in nxopen.cae
specifies the object font for geometry free edges .
ModelDisplayBuilder.StitchedEdgeMarker - Class in nxopen.cae
specifies the marker for endpoints of geometry free edges .
ModelDisplayBuilder.StitchedEdgeWidth - Class in nxopen.cae
specifies object width for display for geometry stitched edges .
modelEditsDone(Tag) - Method in interface nxopen.uf.UFFacet
modelElementRevision() - Method in interface nxopen.assemblies.SearchResultElement
Returns
the underlying design model revision associated with this search element.
ModelElementRevision - Interface in nxopen.pdm
Represents a base class that provides common methods for various model elements in a
CollaborativeDesign
.
ModelElementRevision.PositioningStatus - Class in nxopen.pdm
Represents the positioning status of a design element
MODELER_ERROR - Static variable in class nxopen.uf.UFConstants
modelFile() - Method in interface nxopen.features.shipdesign.QualifySketchBuilder
Returns the model file name.
modelgaskets - Variable in class nxopen.routing.ReuseLibrary.SpecificationsGetGeneralConnectionOptionsData
Whether or not to model Gaskets
MODELING - Static variable in class nxopen.DxfdwgCreator.ExportDataOption
export model data
MODELING - Static variable in class nxopen.DxfdwgCreator.OutputToOption
output to modeling
MODELING - Static variable in class nxopen.DxfdwgImporter.SendModelDataAs
send model data to modeling
MODELING - Static variable in class nxopen.FileNewApplication
Deprecated.
Specifies a modeling file new template
MODELING - Static variable in class nxopen.NXTo2dCreator.OutputToOption
output to modeling
modeling() - Method in interface nxopen.preferences.PartPreferences
Returns object for doing Modeling preferences settings applicable to displayed part .
modeling() - Method in interface nxopen.preferences.SessionPreferences
Returns object for doing Modeling preferences settings applicable to entire session .
modeling() - Method in interface nxopen.UFSession
modelingObjectPropertyTables() - Method in interface nxopen.cae.CaePart
Returns the modeling object property table collection belonging to this CAE Part .
modelingSketchCircles() - Method in interface nxopen.annotations.HoleTableSettingsHoleFiltersBuilder
Returns the modeling sketch circles
License requirements: None.
modelingTolerance() - Method in interface nxopen.weld.DatumCommonBuilder
Returns the modeling distance tolerance.
ModelingView - Interface in nxopen
Represents a Modeling View
Modeling Views may only be created by Save As.
ModelingView.DisplaySectioningData - Class in nxopen
ModelingView.OtherSectionAttrT - Class in nxopen
ModelingView.SectionCap - Class in nxopen
ModelingView.SectionPlane - Class in nxopen
ModelingViewCollection - Interface in nxopen
ModelingViewHighQualityImage - Interface in nxopen
Represents the properties and methods for generating a High Quality Image
of a Modeling View
To obtain an instance of this class, refer to
ModelingView
Created in NX4.0.0
ModelingViewHighQualityImage.DisplayTechniqueType - Class in nxopen
Describes the technique to be used when generating the High Quality Image
ModelingViewHighQualityImage.FormatType - Class in nxopen
Describes the output format of the High Quality Image to be generated
ModelingViewHighQualityImage.ImageCountsData - Class in nxopen
ModelingViewHighQualityImage.ShadeMethod - Class in nxopen
Describes the method to be used to generate a High Quality Image
modelingViews() - Method in interface nxopen.BasePart
Returns the ModelingViewCollection instance belonging to this part .
modelList() - Method in interface nxopen.features.shipdesign.QualifySketchBuilder
Returns the model list.
modelName - Variable in class nxopen.uf.UFDraw.ViewInfo
modelName - Variable in class nxopen.uf.UFUgmgr.AssignCopyDsetNameData
modelName - Variable in class nxopen.uf.UFUgmgr.AssignNewDsetNameData
modelPath() - Method in interface nxopen.features.shipdesign.QualifySketchBuilder
Returns the model file path.
modelPercentScaleValue - Variable in class nxopen.cae.Result.DeformationParameters
Deprecated.
modelPrecentValue - Variable in class nxopen.cae.Post.Mark
modelPrecentValue - Variable in class nxopen.cae.Post.Streamline
modelReferencePoint1() - Method in interface nxopen.display.ImageBaseBuilder
Returns the model reference point1.
modelReferencePoint2() - Method in interface nxopen.display.ImageBaseBuilder
Returns the model reference point2.
modelReferencePoint3() - Method in interface nxopen.display.ImageBaseBuilder
Returns the model reference point3.
modelSelectionType() - Method in interface nxopen.cae.ResultProbeBuilder
Returns the model selection type
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
ModelSetupCheckBuilder - Interface in nxopen.cae.modelcheck
Represents a
ModelSetupCheckBuilder
which can be
used to check if the active
SimSolution
contains all the necessary
items for the analysis, including elements, loads, constraints and materials.
modelTerminals(Port, double, String, boolean, Port[]) - Method in interface nxopen.routing.SegmentManager
Models spline paths to to specified terminals.
ModelTerminalsBuilder - Interface in nxopen.routing
modelTerminalsBuilder() - Method in interface nxopen.routing.RouteManager
Creates a
ModelTerminalsBuilder
which Models Terminal
License requirements: routing_harness ("Routing Harness")
Created in NX7.5.0
ModelTerminalsBuilder.CutBackLocationOption - Class in nxopen.routing
The Enum for selecting the CutBack Option
ModelTerminalsBuilder.ExtensionValueOption - Class in nxopen.routing
The Enum for selecting the ExtensionValue Option
ModelUpdateCorrelMethodBuilder - Interface in nxopen.cae
ModelUpdateCorrelMethodBuilder.Method - Class in nxopen.cae
correlation method option
ModelUpdateDesignVariable - Interface in nxopen.cae
Represents a
ModelUpdateDesignVariable
, which is a meta-solution used to update finite element models to match real life test data
Created in NX8.0.1
ModelUpdateDesignVariablesCollection - Interface in nxopen.cae
Represents a collection of durability events.
ModelUpdateDesignVariablesRapidCreateBuilder - Interface in nxopen.cae
This class is the builder that is used for the rapid creation of design variables.
ModelUpdateDesignVariablesRapidCreateBuilder.DesignVariableTypeEnum - Class in nxopen.cae
The enum for the design variable type.
ModelUpdateDesignVariablesRapidCreateBuilder.MaterialTypesEnum - Class in nxopen.cae
The enum for the material type.
ModelUpdateDesignVariablesRapidCreateBuilder.PhysicalTypesEnum - Class in nxopen.cae
The enum for the physical type.
ModelUpdateOptimOptionsBuilder - Interface in nxopen.cae
ModelUpdateOptimOptionsBuilder.MethodChoice - Class in nxopen.cae
the method of the optimizer
ModelUpdateOptimOptionsBuilder.SteepestDescMethodChoice - Class in nxopen.cae
the mode of the Steepest Descent method
ModelUpdateOptionsBuilder - Interface in nxopen.cae
ModelUpdateOverallWeightsBuilder - Interface in nxopen.cae
modelUpdates() - Method in interface nxopen.cae.CorrelManager
Returns the model update solution collection belonging to this sim part .
ModelUpdateSensitivityViewerBuilder - Interface in nxopen.cae
ModelUpdateSolution - Interface in nxopen.cae
ModelUpdateSolution.TargetType - Class in nxopen.cae
Represents the type when export to targets and errors to csv file
ModelUpdateSolutionBuilder - Interface in nxopen.cae
ModelUpdateSolutionCollection - Interface in nxopen.cae
Represents a collection of model update meta solution
To obtain an instance of this class, refer to
CorrelManager
modelViewCreation() - Method in interface nxopen.PreviewPropertiesBuilder
Returns the model view creation.
modelViewName() - Method in interface nxopen.annotations.SearchModelViewBuilder
Returns the name
License requirements: None.
modelViewToUse() - Method in interface nxopen.tooling.AssemblyDrawingBuilder
Returns the option for model view to use
License requirements: None.
modelweldgaps - Variable in class nxopen.routing.ReuseLibrary.SpecificationsGetGeneralConnectionOptionsData
Whether or not to model Weld Gaps
modeNumber() - Method in interface nxopen.cae.optimization.DAOConstraintBuilder
Returns the frequency mode number
License requirements: None.
modeNumber() - Method in interface nxopen.cae.optimization.DAOObjective
Returns the frequency mode number
License requirements: None.
modeNumber() - Method in interface nxopen.cae.optimization.TBSEigenvalueOptimizationParameters
Returns the number of modes included in the mode tracking
License requirements: None.
modeProperties() - Method in interface nxopen.cae.LaminateDynamicSim
Returns the normal mode collection belonging to this dynamic sim .
MODERATE - Static variable in class nxopen.cae.optimization.TBSSmoothBuilder.ResultFiltering
Filters the element material values partially
MODERATE - Static variable in class nxopen.cae.optimization.TBSTopologyControllerOptimizationParameters.Speed
Moderate stepsize
modeRequest() - Method in interface nxopen.motion.GraphBuilder
Returns the mode request
License requirements: mechanisms ("MECHANISMS")
.
modeSelection() - Method in interface nxopen.tooling.PocketBuilder
Returns the mode select types
License requirements: None.
modeShapes() - Method in interface nxopen.cae.ModelUpdateOverallWeightsBuilder
Returns the overall weights of mode shape targets
License requirements: None.
modeToggle() - Method in interface nxopen.display.TrueStudioBuilder
Returns the Mode Toggle controls whether Advanced Studio display is enabled.
modeType() - Method in interface nxopen.motion.PackagingInterferenceBuilder
modifiable - Variable in class nxopen.pdm.AlternateIdManager.AlternateIdsData
the new value for the alternate for modifiable flag
modifiable - Variable in class nxopen.pdm.AlternateIdManager.AssignAlternateRevData
the new value of flag for revision modifiable
modifiable - Variable in class nxopen.uf.UFUgmgr.AssignAlternatePartIdData
modifiable - Variable in class nxopen.uf.UFUgmgr.AssignCopyDsetNameData
modifiable - Variable in class nxopen.uf.UFUgmgr.AssignNewDsetNameData
modifiable - Variable in class nxopen.uf.UFUgmgr.AssignPartNumberData
modifiable - Variable in class nxopen.uf.UFUgmgr.AssignPartRevData
ModifiableFEModelOccAttribute - Interface in nxopen.cae
This class represents an Interface to the Finite Element Model.
modifiableGeometry() - Method in interface nxopen.geometricutilities.PartModuleInputBuilder
Returns the faces/edges specified as modifiable geometry
License requirements: None.
modifiableGeometryOption() - Method in interface nxopen.geometricutilities.PartModuleInputBuilder
Returns the Modifiable Geometry option
License requirements: None.
modificationPercent() - Method in interface nxopen.features.RefitFaceBuilder
Returns the refit face modification percentage
License requirements: None.
modificationPercentage() - Method in interface nxopen.features.PoleSmoothingBuilder
Returns the modification percentage
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
modificationPercentage() - Method in interface nxopen.features.SmoothSplineBuilder
Returns the modification percentage
License requirements: None.
MODIFIED - Static variable in class nxopen.features.shipdesign.PenetrationUtils.RequestState
MODIFIED - Static variable in class nxopen.formboard.UpdateDiscrepancy.Type
Object exists in both 3D and the formboard but
is modified in some way.
MODIFIED - Static variable in class nxopen.issue.IssueManager.State
Modified state
modified() - Method in interface nxopen.mechatronics.FunctionObjectBuilder
Returns the modified status.
modified() - Method in interface nxopen.mechatronics.LogicObjectBuilder
Returns the modified status.
modified() - Method in interface nxopen.pdm.DesignElementRevision
modified() - Method in interface nxopen.pdm.DesignSubordinateRevision
MODIFIED - Static variable in class nxopen.tooling.SpreadsheetData.ParameterStatus
The parameter value is changed
MODIFIED - Static variable in class nxopen.tooling.SpreadsheetDataParameter.Status
The parameter value is changed
MODIFIED_NO_PROMPT - Static variable in class nxopen.preferences.SessionPdm.UnpopulatedBehaviourType
MODIFIED_OBJECTS - Static variable in class nxopen.uf.UFView.CycleObjects
MODIFIED_PART_REASON - Static variable in class nxopen.uf.UF.CallbackReason
MODIFIED_PROMPT - Static variable in class nxopen.preferences.SessionPdm.UnpopulatedBehaviourType
MODIFIED_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
Whether the component is modified
modifiedInSession() - Method in interface nxopen.PartReopenStatus
Returns whether part is modified in session.
modifiedItemId - Variable in class nxopen.uf.UFUgmgr.ValidateAlternatePartIdData
modifiedLineLength() - Method in interface nxopen.routing.EditLineSegmentBuilder
Updates the line length based on the expression stored in this builder.
modifiedOnDisk() - Method in interface nxopen.PartReopenStatus
Returns whether part is modified on disk.
modifiedPartNum - Variable in class nxopen.uf.UFUgmgr.ValidatePartRevData
modifiedPartRev - Variable in class nxopen.uf.UFUgmgr.ValidatePartRevData
modifiedRevId - Variable in class nxopen.uf.UFUgmgr.ValidateAlternatePartIdData
modifiedSketch() - Method in interface nxopen.features.shipdesign.PenetrationAssociationBuilder
Returns the modified sketch
License requirements: None.
modifiedSketch() - Method in interface nxopen.features.shipdesign.PenetrationCutoutBuilder
Returns the modified sketch
License requirements: None.
modifiedSketch() - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder
Returns the modified sketch
License requirements: None.
MODIFIER - Static variable in class nxopen.annotations.DraftingSurfaceFinishBuilder.FinishType
Modifier
MODIFIER - Static variable in class nxopen.annotations.SurfaceFinishBuilder.FinishType
Modifier
modifier - Variable in class nxopen.uf.UFGdt.AskUnitBasisData
MODIFIER_ALL_AROUND - Static variable in class nxopen.annotations.DraftingSurfaceFinishBuilder.FinishType
Modifier, All Around
MODIFIER_ALL_AROUND - Static variable in class nxopen.annotations.SurfaceFinishBuilder.FinishType
Modifier, All Around
MODIFIER_MATERIAL_REMOVAL_PROHIBITED - Static variable in class nxopen.annotations.DraftingSurfaceFinishBuilder.FinishType
Modifier, Material Removal Prohibited
MODIFIER_MATERIAL_REMOVAL_PROHIBITED - Static variable in class nxopen.annotations.SurfaceFinishBuilder.FinishType
Modifier, Material Removal Prohibited
MODIFIER_MATERIAL_REMOVAL_PROHIBITED_ALL_AROUND - Static variable in class nxopen.annotations.DraftingSurfaceFinishBuilder.FinishType
Modifier, Material Removal Prohibited, All Around
MODIFIER_MATERIAL_REMOVAL_PROHIBITED_ALL_AROUND - Static variable in class nxopen.annotations.SurfaceFinishBuilder.FinishType
Modifier, Material Removal Prohibited, All Around
MODIFIER_MATERIAL_REMOVAL_REQUIRED - Static variable in class nxopen.annotations.DraftingSurfaceFinishBuilder.FinishType
Modifier, Material Removal Required
MODIFIER_MATERIAL_REMOVAL_REQUIRED - Static variable in class nxopen.annotations.SurfaceFinishBuilder.FinishType
Modifier, Material Removal Required
MODIFIER_MATERIAL_REMOVAL_REQUIRED_ALL_AROUND - Static variable in class nxopen.annotations.DraftingSurfaceFinishBuilder.FinishType
Modifier, Material Removal Required, All Around
MODIFIER_MATERIAL_REMOVAL_REQUIRED_ALL_AROUND - Static variable in class nxopen.annotations.SurfaceFinishBuilder.FinishType
Modifier, Material Removal Required, All Around
modifiers - Variable in class nxopen.uf.UFPd.AskBusinessProcessModifiersData
modify(String, Unit) - Method in interface nxopen.cae.SimConditionParam
modify(int, double, double, double) - Method in interface nxopen.cam.FormEdgesBuilder
Modify an existing form edges item
License requirements: cam_base ("CAM BASE")
.
modify(NXObject, double, double, double, double) - Method in interface nxopen.cam.HolderSectionBuilder
Modify an existing holder section item
License requirements: cam_base ("CAM BASE")
.
modify(int, double, double, double, double) - Method in interface nxopen.cam.HolderSectionBuilder
Modify an existing holder section item by index
License requirements: cam_base ("CAM BASE")
.
modify(int, Point, double, double) - Method in interface nxopen.cam.InterpolateAngle
Modify an existing item by index
License requirements: cam_base ("CAM BASE")
.
modify(int, Point, nxopen.Direction) - Method in interface nxopen.cam.InterpolateVector
Modify an existing item by index
License requirements: cam_base ("CAM BASE")
.
modify(int, String, double, double, double, int, int, int, int, int) - Method in interface nxopen.cam.MillingTrackpointBuilder
modify(int, String, int, double, double, double, int, int, int, int, int) - Method in interface nxopen.cam.MillingTrackpointBuilder
Modify an existing track point, the input name will be changed if it is not unique.
modify(int, int, double, int) - Method in interface nxopen.cam.MultipleStepoverBuilder
Modify item
License requirements: cam_base ("CAM BASE")
.
modify(int, double, double, double, double) - Method in interface nxopen.cam.StepParamsBuilder
Modify an existing step params item
License requirements: cam_base ("CAM BASE")
.
modify(int, double) - Method in interface nxopen.cam.StockPerPassBuilder
Modify item
License requirements: cam_base ("CAM BASE")
.
modify(NXObject, String, int, int, double, double, double, double, int, int) - Method in interface nxopen.cam.TrackingBuilder
Modify an existing trackpoint
License requirements: cam_base ("CAM BASE")
.
modify(int, NXObject, TurnAvoidancePathPointsBuilder.MotionTypes, TurnAvoidancePathPointsBuilder.FeedrateModesTypes, double, TurnAvoidancePathPointsBuilder.CustomFeedrateUnitTypes) - Method in interface nxopen.cam.TurnAvoidancePathPointsBuilder
Modify an existing avoidance path point,name maybe changed if not unique
License requirements: cam_base ("CAM BASE")
.
modify(int, int, double) - Method in interface nxopen.cam.TurnRoughVariableIncrementBuilder
Modify a selected item
License requirements: cam_base ("CAM BASE")
.
modify(int, int, double) - Method in interface nxopen.cam.TurnThreadFinishPassesBuilder
Modify an existing finish passes item
License requirements: cam_base ("CAM BASE")
.
MODIFY - Static variable in class nxopen.features.shipdesign.PenetrationRequestBuilder.RequestDialogType
MODIFY - Static variable in class nxopen.tooling.StandardPartBuilder.EditType
MODIFY_EXISTING - Static variable in class nxopen.cae.SolverAppendOption.MergeOption
MODIFY_LEGS - Static variable in class nxopen.cae.ElementConnectivityBuilder.Methods
Add or delete leg nodes of spider element
modifyBomData(int, int, String) - Method in interface nxopen.tooling.BomListBuilder
Modifies BOM data
License requirements: None.
modifyByUpperDiameter(int, double, double, double, double) - Method in interface nxopen.cam.HolderSectionBuilder
Modify an existing holder section item by upper diameter
License requirements: cam_base ("CAM BASE")
.
modifyData(int, NXObject, double, double) - Method in interface nxopen.cam.InspectionPathPointBuilder
Modify an existing path point, name changed if not unique
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
modifyData(int, NXObject, TurnAvoidancePathPointsBuilder.MotionTypes, TurnAvoidancePathPointsBuilder.FeedrateModesTypes, double, TurnAvoidancePathPointsBuilder.CustomFeedrateUnitTypes, TurnAvoidancePathPointsBuilder.PointStatus, int, NXObject, int, NXObject) - Method in interface nxopen.cam.TurnAvoidancePathPointsBuilder
Modify an existing avoidance path point,name maybe changed if not unique
License requirements: cam_base ("CAM BASE")
.
modifyDefaults(int, int, int, int) - Method in interface nxopen.uf.UFObj
modifyFeatureHandler(WeldObjectBuilder) - Method in interface nxopen.weld.CustomManager.ModifyFeatureHandler
User defined method that is called whenever a welding joints are created or edited
License requirements: None.
modifyInputSheet() - Method in interface nxopen.die.CompensateRoughDataBuilder
Returns the modify input sheet setting.
modifyInputSheet() - Method in interface nxopen.features.GlobalShapingBuilder
Returns the modify input sheet
License requirements: None.
modifyItemsButton(NXObject[], IntegrateRunsBuilder.Button) - Method in interface nxopen.routing.IntegrateRunsBuilder
Updates the selected nodes in Specify From/To item tree list to From/To/Member item based on buttonType
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
modifyMethod() - Method in interface nxopen.features.GlobalShapingBuilder
Returns the modify method
License requirements: None.
modifyMidsurface(MidSurfaceByFacePairsBuilder.SurfaceType, NXObject[]) - Method in interface nxopen.features.MidSurfaceByFacePairsBuilder
Use cloud of points to generate neutral sheet
License requirements: solid_modeling ("SOLIDS MODELING")
.
modifyNodeDofs(FENode[], boolean[], boolean[], boolean[], boolean[], boolean[], boolean[]) - Method in interface nxopen.cae.CaeDOFSet
Modify the dofs of the passed in nodes in the CaeDOFSet.
modifyOffsetsInString(Tag, UFCurve.OcfData, int, UFCurve.OcfValues[]) - Method in interface nxopen.uf.UFCurve
modifyPercent() - Method in interface nxopen.facet.SmoothFacetBodyBuilder
Returns the modification percentage
License requirements: None.
modifyProductAttribute(Tag, UFPd.ProductAttribute) - Method in interface nxopen.uf.UFPd
modifySpreadsheetData(String[], String[]) - Method in interface nxopen.features.shipdesign.StandardPartFrameworkBuilder
Modifies specific parameter values without change parameter statuses.
modifyStyle() - Method in interface nxopen.tooling.HoleManufacturingNoteBuilder
The method to modify the style of the previewed note
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
modifySymbol(int, Point3d) - Method in interface nxopen.annotations.ForeshorteningSymbolBuilder
Modify the foreshortening symbol
License requirements: None.
modifyTime(SimConditionTimeStep, double) - Method in interface nxopen.cae.SimConditionTimeStepCollection
Modifies the time of a
SimConditionTimeStep
in time history
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
Created in NX9.0.0
modifyVariableIncrementListData(int, int, double) - Method in interface nxopen.cam.CenterlineDrillVariableIncrementBuilder
Modify an existing variable increment value, name maybe changed if not unique
License requirements: cam_base ("CAM BASE")
.
modifyWithParameter(int, double, double, double, double) - Method in interface nxopen.cam.UdtSectionBuilder
Modify an existing udt section item with parameter
License requirements: cam_base ("CAM BASE")
.
modl() - Method in interface nxopen.UFSession
MODL_MAX_ERROR - Static variable in class nxopen.uf.UFConstants
MODL_PARAM_ALL - Static variable in class nxopen.uf.UFGdt.ModlParameter
MODL_PARAM_COUNTERBORE - Static variable in class nxopen.uf.UFGdt.ModlParameter
MODL_PARAM_COUNTERSINK - Static variable in class nxopen.uf.UFGdt.ModlParameter
MODL_PARAM_HOLE - Static variable in class nxopen.uf.UFGdt.ModlParameter
MODL_PARAM_INVALID - Static variable in class nxopen.uf.UFGdt.ModlParameter
MODL_PARAM_NONE - Static variable in class nxopen.uf.UFGdt.ModlParameter
MODL_PARAM_XLENGTH - Static variable in class nxopen.uf.UFGdt.ModlParameter
MODL_PARAM_XLENGTH_TOP - Static variable in class nxopen.uf.UFGdt.ModlParameter
MODL_PARAM_YLENGTH - Static variable in class nxopen.uf.UFGdt.ModlParameter
MODL_PARAM_YLENGTH_TOP - Static variable in class nxopen.uf.UFGdt.ModlParameter
ModlAlongCurveAngle - Interface in nxopen.geometricutilities
modlBodyAskBody(Tag) - Method in interface nxopen.uf.UFSf
ModlData() - Constructor for class nxopen.uf.UFGdt.ModlData
ModlData(int, Tag[], UFGdt.ModlParameter, Tag) - Constructor for class nxopen.uf.UFGdt.ModlData
ModlDistanceAngle - Interface in nxopen.geometricutilities
modlFeatureList - Variable in class nxopen.uf.UFGdt.ModlData
modlFeatures - Variable in class nxopen.uf.UFGdt.AskModlFeaturesData
modlFeatures() - Method in interface nxopen.UFSession
modlGeneral() - Method in interface nxopen.UFSession
ModlMotion - Interface in nxopen.geometricutilities
ModlMotion.Delta - Class in nxopen.geometricutilities
Represents the options of Delta XYZ.
ModlMotion.Options - Class in nxopen.geometricutilities
Represents the options of Motion.
modlParam - Variable in class nxopen.uf.UFGdt.ModlData
modlSmd() - Method in interface nxopen.UFSession
modlUi() - Method in interface nxopen.UFSession
MODULE_IS_NOT_AVAILABLE - Static variable in class nxopen.uf.UFConstants
moduleToNest() - Method in interface nxopen.geometricutilities.NestModuleBuilder
moduleToUnnest() - Method in interface nxopen.geometricutilities.UnnestModuleBuilder
mofiError - Variable in class nxopen.uf.UFWeight.Properties
mofiState - Variable in class nxopen.uf.UFWeight.Properties
MOLD_WIZARD - Static variable in class nxopen.features.PatchOpeningsBuilder.Types
Patch with Mold wizard edge patch method
MOLD_WIZARD - Static variable in class nxopen.tooling.ToolingApplication
MoldWizard
moldbaseStyle() - Method in interface nxopen.tooling.MotionSimulationBuilder
Returns the moldbase style to control the visibility of process parameters for mold
License requirements: None.
moldCsys() - Method in interface nxopen.tooling.ToolingManager
Returns the MoldCsysCollection instance belonging to this part .
MoldCsysBuilder - Interface in nxopen.tooling
MoldCsysBuilder.Wcsposition - Class in nxopen.tooling
Represents the method to computer the WCS positino
MoldCsysCollection - Interface in nxopen.tooling
MoldDesign - Interface in nxopen.tooling
Represents an Mold Design.
moldDesign() - Method in interface nxopen.tooling.ToolingManager
Returns the MoldDesignCollection instance belonging to this part .
MoldDesignCollection - Interface in nxopen.tooling
Represents a collection of Mold Design.
moldFace() - Method in interface nxopen.features.shipdesign.PlateBuilder
Returns the mold face, which is used to create the plate body and define the plate placement.
moldFaceOffset() - Method in interface nxopen.features.shipdesign.PlateBuilder
Returns the mold face offset, which defines an offset distance to the mold face.
moldFacePlane() - Method in interface nxopen.features.shipdesign.DeckBuilder
Returns the plane in which the camber shape is generated.
moldFacePlane() - Method in interface nxopen.features.shipdesign.LongitudinalBulkheadBuilder
Returns the supplied section will be projected to this plane for the start of the extrusion.
moldFacePlaneList() - Method in interface nxopen.features.shipdesign.DeckBuilder
Returns the list of planes defined to define the mold face.
moldFacePlaneList() - Method in interface nxopen.features.shipdesign.GenericPlateSystemBuilder
Returns the list of planes defined to define the mold face.
moldFacePlaneList() - Method in interface nxopen.features.shipdesign.LongitudinalBulkheadBuilder
Returns the list of planes defined to define the mold face.
moldFacePlaneList() - Method in interface nxopen.features.shipdesign.TransverseBulkheadBuilder
Returns the list of planes defined to define the mold face.
moldFacePlanes() - Method in interface nxopen.features.shipdesign.DeckBuilder
Returns the planes selected to define the mold face.
moldFacePlanes() - Method in interface nxopen.features.shipdesign.GenericPlateSystemBuilder
Returns the planes selected to define the mold face.
moldFacePlanes() - Method in interface nxopen.features.shipdesign.LongitudinalBulkheadBuilder
Returns the planes selected to define the mold face.
moldFacePlanes() - Method in interface nxopen.features.shipdesign.TransverseBulkheadBuilder
Returns the planes selected to define the mold face.
moldFaces() - Method in interface nxopen.features.shipdesign.HullBuilder
Returns the faces selected that defines the overall shape of the hull.
moldFaceSection() - Method in interface nxopen.features.shipdesign.LongitudinalBulkheadBuilder
Returns the section containing the shape to extrude.
moldFaceSheet() - Method in interface nxopen.features.shipdesign.DeckBuilder
Returns the sheet body selected to define the mold face.
moldFaceSheet() - Method in interface nxopen.features.shipdesign.GenericPlateSystemBuilder
Returns the sheet body selected to define the mold face.
moldFaceSheet() - Method in interface nxopen.features.shipdesign.HullBuilder
Returns the sheet body selected that defines the overall shape of the hull.
moldFaceSheet() - Method in interface nxopen.features.shipdesign.LongitudinalBulkheadBuilder
Returns the sheet body selected to define the mold face.
moldFaceSheet() - Method in interface nxopen.features.shipdesign.TransverseBulkheadBuilder
Returns the sheet body selected to define the mold face.
moldingSideScallop() - Method in interface nxopen.features.shipdesign.ProfileCutoutBuilder
Returns the nxopen.features.shipdesign.SteelFeatureSpreadsheetBuilder
, which holds the information of the molding side scallop.
MoldInsertBuilder - Interface in nxopen.tooling
MoldInsertBuilder.BooleanType - Class in nxopen.tooling
design type: unite single workpieces, subtract overall workpieces
MoldInsertCollection - Interface in nxopen.tooling
Creates a MoldInsertCollection class
To obtain an instance of this class, refer to
ToolingManager
Created in NX6.0.0
moldInserts() - Method in interface nxopen.tooling.ToolingManager
Returns the MoldInsertCollection instance belonging to this part .
moldLine() - Method in interface nxopen.features.shipdesign.QualifySketchBuilder
Returns the selected mold line.
moldLines - Variable in class nxopen.uf.UFModl.GflangeOptionsData
MoldProcessBuilder - Interface in nxopen.tooling
MoldProcessCollection - Interface in nxopen.tooling
Represents a collection of Mold Process
To obtain an instance of this class, refer to
ToolingManager
Created in NX6.0.0
moldProcesses() - Method in interface nxopen.tooling.ToolingManager
Returns the MoldProcessCollection instance belonging to this part .
moldwizard() - Method in interface nxopen.tooling.ToolingManager
Returns the moldwizard manager for this part .
MoldwizardManager - Interface in nxopen.tooling
Provides create builder methods for Moldwizard.
MOLECULAR_DIFFUSION_COEFFICIENT - Static variable in class nxopen.cae.Result.Quantity
mom() - Method in interface nxopen.UFSession
MOM_VARIABLES - Static variable in class nxopen.sim.SimDebugBuilder.DumpType
Dump Mom Variables
MOMENT - Static variable in class nxopen.cae.XyFunctionMeasure
Moment unit
MOMENT_BF_FT - Static variable in class nxopen.cae.XyFunctionUnit
Moment unit: lbf-ft
MOMENT_BF_IN - Static variable in class nxopen.cae.XyFunctionUnit
Moment unit: lbf-in
MOMENT_MN_MM - Static variable in class nxopen.cae.XyFunctionUnit
Moment unit: mN-mm
MOMENT_NM - Static variable in class nxopen.cae.XyFunctionUnit
Moment unit: N-m
MOMENT_NMM - Static variable in class nxopen.cae.XyFunctionUnit
Moment unit: N-mm
momentInertiaYY - Variable in class nxopen.cae.BeamSection.Properties
Moment of Inertia about y-axis
momentInertiaYZ - Variable in class nxopen.cae.BeamSection.Properties
YZ-Product of Inertia
momentInertiaZZ - Variable in class nxopen.cae.BeamSection.Properties
Moment of Inertia about z-axis
momentsOfInertia - Variable in class nxopen.uf.UFWeight.Properties
momentum(double, double) - Method in interface nxopen.EngineeringFunction
Calculate the momentum.
MONETARY - Static variable in class nxopen.annotations.TableCellStyleBuilder.CellFormatTypes
Monetary
MONETARY - Static variable in class nxopen.annotations.TableCellStyleBuilder.FormatType
Deprecated.
MONO_ARC - Static variable in class nxopen.die.QuickBinderBuilder.Types
mono arc
MONOCHROME - Static variable in class nxopen.display.ImageBaseBuilder.ImageColorModes
monochrome color mode
MONOCHROME - Static variable in class nxopen.ModelingViewHighQualityImage.DisplayTechniqueType
Pixels are converted to black and white and dithered using
the Floyd-Steinberg algorithm.
monochromeBackgroundColor() - Method in interface nxopen.preferences.PartVisualizationColorSetting
Returns the monochrome background color
License requirements: None.
monochromeDisplay() - Method in interface nxopen.preferences.PartVisualizationColorSetting
Returns the monochrome display flag.
monochromeDisplay - Variable in class nxopen.uf.UFDisp.DrawingDisplayData
monochromeForegroundColor() - Method in interface nxopen.preferences.PartVisualizationColorSetting
Returns the monochrome foreground color.
monochromePreselectionColor() - Method in interface nxopen.preferences.PartVisualizationColorSetting
Returns the monochrome color for preselected objects
License requirements: None.
monochromeSelectionColor() - Method in interface nxopen.preferences.PartVisualizationColorSetting
Returns the monochrome selection_color.
MONOCULAR - Static variable in class nxopen.features.vehicledesign.CloseRangeVisibilityBuilder.EyePointTypes
Monocular type
MONOLITHIC - Static variable in class nxopen.JtCreator.FileStructure
MONOLITHIC
month() - Method in interface nxopen.DateItemBuilder
Returns the month
License requirements: None.
month - Variable in class nxopen.uf.UFPs.KernelVersion
MONTH - Static variable in class nxopen.visualreporting.Classifier.DateGroupMethodOption
The date grouping by month will be used
MOONEYRIVLIN - Static variable in class nxopen.PhysicalMaterial.Type
Mooney Rivlin
MOONEYRIVLINTESTDATA - Static variable in class nxopen.PhysicalMaterial.Type
Mooney Rivlin - test data option
MOORE_PENROSE_PSEUDOINVERSE - Static variable in class nxopen.motion.LmsSolverProperty.DynamicInitialVelocityMethods
MORE - Static variable in class nxopen.annotations.SearchModelViewBuilder.ValueComparisionOptions
MORE - Static variable in class nxopen.visualreporting.VisualReportExplorer.ReportDownStatus
There are more objects of interest below the currently reported upon objects
MORE_EQUAL - Static variable in class nxopen.annotations.SearchModelViewBuilder.ValueComparisionOptions
moreDetails - Variable in class nxopen.uf.UFStd.VrmlParams
moreSummaryDetails() - Method in interface nxopen.VRMLImporter
Returns the More Summary Details flag.
MORPH - Static variable in class nxopen.features.MoveEdgeBuilder.EndFaceBehaviorType
MORPH - Static variable in class nxopen.features.OffsetEdgeBuilder.EndFaceBehaviourType
MORROW - Static variable in class nxopen.cae.DurabilityDamageEvaluationBuilder.EquivalentStressMethodEnum
MORROW - Static variable in class nxopen.cae.DurabilityEventFatigueSettingsBuilder.EquivalentStressMethodEnum
Morrow
MORROW - Static variable in class nxopen.cae.DurabilityEventFatigueSettingsBuilder.OrthotropicMeanStressEnum
MOST_RECENT_RUN - Static variable in class nxopen.validate.Parser.DataSourceTypes
Result of most recent run
MOTION - Static variable in class nxopen.cae.XyFunctionMacroType
Function is only used in a motion application
MOTION - Static variable in class nxopen.cam.MoveBuilder.Feed
Motion
motion() - Method in interface nxopen.features.AdmMoveFaceBuilder
Returns the motion.
motion() - Method in interface nxopen.features.CopyFaceBuilder
Returns the motion about which the copied faces move
License requirements: None.
motion() - Method in interface nxopen.features.CutFaceBuilder
Returns the motion about which the cut faces move
License requirements: None.
motion() - Method in interface nxopen.features.MoveEdgeBuilder
Returns the motion which record the move behaviour.
motion() - Method in interface nxopen.features.PullFaceBuilder
Returns the motion.
motion() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
Returns the option to specify how the suspension system motion will be defined.
motion() - Method in interface nxopen.geometricutilities.PatternClockingBuilder
Returns the user defined transform motion
License requirements: None.
motion() - Method in interface nxopen.tooling.CoolingDefineChannelBuilder
Returns the object which defines the transformation from start point to end point.
motion() - Method in interface nxopen.UFSession
Motion2DContact() - Constructor for class nxopen.uf.UFMotion.Motion2DContact
Motion2DContact(String, int, Tag[], int, Tag[], int, boolean, boolean, double, UFMotion.ContactParameters) - Constructor for class nxopen.uf.UFMotion.Motion2DContact
Motion3DContact() - Constructor for class nxopen.uf.UFMotion.Motion3DContact
Motion3DContact(String, int, Tag[], int, Tag[], UFMotion.ContactForce, UFMotion.ContactFriction, double, UFMotion.ContactParameters, double) - Constructor for class nxopen.uf.UFMotion.Motion3DContact
MOTION_ADAMS_RES_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
MOTION_ADAMS_RES_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
MOTION_BASED - Static variable in class nxopen.cam.SimulationOptionsBuilder.IpwEnable
motion based
MOTION_EXPORT_SDK_RMD_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
MOTION_EXPORT_SDK_RMD_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
MOTION_FLEXBODY_RFI_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
MOTION_FLEXBODY_RFI_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
MOTION_IMP_EXP_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
MOTION_IMP_EXP_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
MOTION_RECURDYN_RAD_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
MOTION_RECURDYN_RAD_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
MOTION_RECURDYN_RAD_RAN_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
MOTION_RECURDYN_RAD_RAN_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
MOTION_TYPE_APPROACH - Static variable in class nxopen.uf.UFPath.MotionType
MOTION_TYPE_CUT - Static variable in class nxopen.uf.UFPath.MotionType
MOTION_TYPE_CYCLE - Static variable in class nxopen.uf.UFPath.MotionType
MOTION_TYPE_DEPARTURE - Static variable in class nxopen.uf.UFPath.MotionType
MOTION_TYPE_ENGAGE - Static variable in class nxopen.uf.UFPath.MotionType
MOTION_TYPE_FIRST_CUT - Static variable in class nxopen.uf.UFPath.MotionType
MOTION_TYPE_FROM - Static variable in class nxopen.uf.UFPath.MotionType
MOTION_TYPE_GOHOME - Static variable in class nxopen.uf.UFPath.MotionType
MOTION_TYPE_LAST_ELEMENT - Static variable in class nxopen.uf.UFPath.MotionType
MOTION_TYPE_RAPID - Static variable in class nxopen.uf.UFPath.MotionType
MOTION_TYPE_RETRACT - Static variable in class nxopen.uf.UFPath.MotionType
MOTION_TYPE_RETURN - Static variable in class nxopen.uf.UFPath.MotionType
MOTION_TYPE_STEPOVER - Static variable in class nxopen.uf.UFPath.MotionType
MOTION_TYPE_THREAD_TURN - Static variable in class nxopen.uf.UFPath.MotionType
MOTION_TYPE_TRAVERSAL - Static variable in class nxopen.uf.UFPath.MotionType
MOTION_TYPE_UNDEFINED - Static variable in class nxopen.uf.UFPath.MotionType
MotionBuilder - Interface in nxopen.motion
This builder class is used to create or edit
MotionObject
This is an abstract class, and cannot be created.
motionDistance() - Method in interface nxopen.tooling.DefineCamBuilder
Returns the motion distance
License requirements: None.
motionEnd() - Method in interface nxopen.cam.LaserLinearMove
Returns the Motion End
License requirements: None.
motionEndType() - Method in interface nxopen.cam.CircularAboutAxisMoveBuilder
Returns the arc end type
License requirements: None.
MotionEnvironment - Interface in nxopen.motion
Represents a Motion Environment
To obtain an instance of this class, refer to
MotionSession
Created in NX7.5.0
MotionEnvironment.Analysis - Class in nxopen.motion
Represents analysis type of current mechanisms
MotionEnvironment.JointWizardStatus - Class in nxopen.motion
Represents the on-off status of joint wizard
MotionEnvironment.Solver - Class in nxopen.motion
Represents Motion solver of current mechanism
motionEulerAngle1() - Method in interface nxopen.motion.DriverMultiOperations
Returns the motion motion euler angle1, it is for revolute joint and cylindrical joint
License requirements: None.
motionFace() - Method in interface nxopen.features.CoaxialBuilder
Returns the motion face.
motionFace() - Method in interface nxopen.features.MakeOffsetBuilder
Returns the motion face
License requirements: None.
motionFace() - Method in interface nxopen.features.ParallelBuilder
Returns the motion face.
motionFace() - Method in interface nxopen.features.PerpendicularBuilder
Returns the motion face
License requirements: None.
motionFace() - Method in interface nxopen.features.SymmetricBuilder
Returns the motion face.
motionFace() - Method in interface nxopen.features.TangentBuilder
Returns the motion face
License requirements: None.
MotionManager - Interface in nxopen.motion
A manager to deal with all motion objects
To obtain an instance of this class, refer to
Part
Created in NX5.0.0
motionManager() - Method in interface nxopen.Part
Returns the MotionManager for this part .
motionMethod() - Method in interface nxopen.cam.ToolPathEditorBuilder
Returns the motion method
License requirements: None.
MotionMethods - Interface in nxopen.motion
motionMethods() - Method in interface nxopen.motion.MotionSession
Returns the
MotionMethods
belonging to this part
Created in NX8.0.0
motionObject - Variable in class nxopen.motion.GraphBuilder.CurveData
Attribute object
MotionObject - Interface in nxopen.motion
Represents the motion base object class.
MotionObject.GroupType - Class in nxopen.motion
The group type attribute is used for import subassembly functionality.
motionOutput() - Method in interface nxopen.cam.Cycle
Returns the motion output
License requirements: None.
motionOutput() - Method in interface nxopen.cam.MillOperationBuilder
Returns the motion output builder
License requirements: None.
motionOutput() - Method in interface nxopen.cam.TurningOperationBuilder
Returns the motion output
License requirements: None.
motionOutputBuilder() - Method in interface nxopen.cam.OperationBuilder
Returns the motion output builder
License requirements: None.
motionPointOnCurve() - Method in interface nxopen.motion.DriverMultiOperations
Returns the motion point on curve, it is for point on curve constraint
License requirements: None.
motionProfile() - Method in interface nxopen.mechatronics.CamBuilder
Returns the motion profile.
motionProfile() - Method in interface nxopen.mechatronics.GraphControlBuilder
Returns the motion profile.
MotionProfile - Interface in nxopen.mechatronics
Represents the MotionProfile class.
MotionProfileBuilder - Interface in nxopen.mechatronics
MotionProfileBuilder.MasterValueUnit - Class in nxopen.mechatronics
the Master Unit types
MotionProfileBuilder.ProfileCyclicType - Class in nxopen.mechatronics
Indicates which cyclic type should be take.The type of Cam Profile can be switched between non-cyclic,
cyclic and relative cyclic.
MotionProfileBuilder.SlaveValueUnit - Class in nxopen.mechatronics
the Slave Unit types
MotionProfileCollection - Interface in nxopen.mechatronics
Represents a collection of Motion Profile.
motionProfiles() - Method in interface nxopen.mechatronics.PhysicsManager
MotionSensor - Interface in nxopen.motion
Represents a motion sensor
To create or edit an instance of this class, use
MotionSensorBuilder
Created in NX6.0.0
MotionSensorBuilder - Interface in nxopen.motion
MotionSensorBuilder.Component - Class in nxopen.motion
component enumeration type
MotionSensorBuilder.Reference - Class in nxopen.motion
reference frame enumeration type
MotionSensorBuilder.Types - Class in nxopen.motion
sensor type
MotionSensorCollection - Interface in nxopen.motion
Represents a collection of sensor objects
To obtain an instance of this class, refer to
MotionManager
Created in NX6.0.0
motionSensors() - Method in interface nxopen.motion.MotionManager
Returns the Motion.MotionSensorCollection
belonging to this part
Created in NX3.0.0
MotionSession - Interface in nxopen.motion
Represents motion session
To obtain an instance of this class, refer to
Session
Created in NX5.0.0
motionSession() - Method in interface nxopen.Session
Returns the Motion session .
motionSimFile() - Method in interface nxopen.cae.SimMotionLoadsBuilder
Returns the motion simulation part file
License requirements: None.
MotionSimulation - Interface in nxopen.motion
Represents Motion.Simulation
To obtain an instance of this class, refer to
Session
Created in NX5.0.0
motionSimulation() - Method in interface nxopen.Session
Returns the Motion session .
motionSimulation() - Method in interface nxopen.tooling.ToolingManager
Returns the MotionSimulationCollection instance belonging to this part .
MotionSimulationBuilder - Interface in nxopen.tooling
MotionSimulationBuilder.CamDefinitionType - Class in nxopen.tooling
Specifies the way to define cam, automatically or manually.
MotionSimulationBuilder.EjectorMoveOptions - Class in nxopen.tooling
Specifies the ejector move type, after or while
MotionSimulationBuilder.MoldbaseStyleType - Class in nxopen.tooling
Specifies the style type of moldbase, two-plate style or three-plate style
MotionSimulationBuilder.Types - Class in nxopen.tooling
Specifies the operation options of motion simulation.
MotionSimulationCollection - Interface in nxopen.tooling
Represents a collection of MotionSimulation.
MotionSolution - Interface in nxopen.motion
Represents a solution
To create or edit an instance of this class, use
MotionSolutionBuilder
Created in NX5.0.0
MotionSolutionBuilder - Interface in nxopen.motion
MotionSolutionBuilder.AnalysisTypes - Class in nxopen.motion
Analysis type
MotionSolutionBuilder.SolutionTypes - Class in nxopen.motion
Solution type
MotionSolutionCollection - Interface in nxopen.motion
Represents a collection of Driver objects
To obtain an instance of this class, refer to
MotionManager
Created in NX5.0.0
motionSolutions() - Method in interface nxopen.motion.MotionManager
Returns the Motion.MotionSolutionCollection
belonging to this part
Created in NX3.0.0
motionTranslationZ() - Method in interface nxopen.motion.DriverMultiOperations
Returns the motion translation z, it is for slider joint and cylindrical joint
License requirements: None.
motionType() - Method in interface nxopen.cam.AcrossVoids
Returns the motion type
License requirements: None.
motionType() - Method in interface nxopen.cam.InspectionMoveBuilder
Returns the motion type
License requirements: None.
motionType() - Method in interface nxopen.cam.InspectionOperationTransformBuilder
Returns the motion type
License requirements: None.
motionType() - Method in interface nxopen.cam.MoveBuilder
Returns the motion type
License requirements: None.
motionType() - Method in interface nxopen.cam.OperationTransformBuilder
Returns the motion type
License requirements: None.
motiontype - Variable in class nxopen.cam.TurnAvoidancePathPointsBuilder.PointData
the motionTypeColumn
motiontype - Variable in class nxopen.cam.TurnAvoidancePathPointsBuilder.PointListData
the motionTypeColumn
motionType() - Method in interface nxopen.mechatronics.TransportSurfaceBuilder
Returns the motion type
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
motor() - Method in interface nxopen.motion.DriverOperation
Returns the motor
License requirements: None.
MOTOR - Static variable in class nxopen.motion.DriverOperation.Type
Motor
Motor - Interface in nxopen.motion
Represents a motion motor base object class
This is an abstract class, and cannot be created.
MOTOR_DRIVER - Static variable in class nxopen.motion.GraphBuilder.RequestChoices
Motor Driver
MOTOR_SIGNAL - Static variable in class nxopen.cae.XyFunctionMeasure
Motor signal unit
MOTOR_SIGNAL_NONE - Static variable in class nxopen.cae.XyFunctionUnit
Motor Signal unit: none
MotorBuilder - Interface in nxopen.motion
This builder class is used to create or edit
Motor
This is an abstract class, and cannot be created.
motorType() - Method in interface nxopen.motion.PMDCMotorBuilder
Returns the motor type
License requirements: nx_motion_motor ("NX Motion Motor")
.
MOUNT - Static variable in class nxopen.sim.KinematicJunctionBuilder.SystemClass
a mounting junction
MOUNT_COMPONENT - Static variable in class nxopen.tooling.MotionSimulationBuilder.Types
Mounts die components to kinematic components
mountingAngle() - Method in interface nxopen.features.shipdesign.OrientationAngleMethodsBuilder
Returns the constant angle value to rotate from the given vector or reference object.
mountingAngle() - Method in interface nxopen.features.shipdesign.StiffenerBuilder
Returns the mounting angle expression
License requirements: None.
mountingMethod() - Method in interface nxopen.features.shipdesign.EditStockBuilder
Returns the mounting method
License requirements: None.
mountingMethod() - Method in interface nxopen.features.shipdesign.StiffenerBuilder
Returns the mounting method
License requirements: None.
mountingMethod() - Method in interface nxopen.features.shipdesign.StiffenerSystemBuilder
Returns the mounting method
License requirements: None.
mountingMethod() - Method in interface nxopen.features.shipdesign.SubSystemBuilder
Returns the mounting method
License requirements: None.
mountingPosition() - Method in interface nxopen.cam.BoundaryTurnBlank
Returns the mounting position
License requirements: None.
mountingType() - Method in interface nxopen.cae.responsesimulation.RSEventAttributes
Returns the ship type
License requirements: nx_response_anlys ("NX Response Analysis")
.
mountKimComp(UFVariant, String, String, String, String, double) - Method in interface nxopen.uf.UFSim
mountPunchEdge() - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
Returns the punch edge to place the mount.
mountPunchFace() - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
Returns the punch face to place the mount.
mountTool(UFVariant, UFSim.ToolClass, String, String, String, double) - Method in interface nxopen.uf.UFSim
mouseGestureType() - Method in interface nxopen.display.SelPref
Returns the mouse gesture type
License requirements: None.
movable() - Method in interface nxopen.annotations.DatumTargetBuilder
Returns the flag that indicates movable .If true then movable.
MOVABLE_FRONT - Static variable in class nxopen.features.vehicledesign.SeatBeltAnchorageBuilder.SeatTypes
front
MOVABLE_REAR - Static variable in class nxopen.features.vehicledesign.SeatBeltAnchorageBuilder.SeatTypes
rear
movableModifierAngle() - Method in interface nxopen.annotations.DatumTargetBuilder
Returns the movable modifier angle
License requirements: None.
MOVE - Static variable in class nxopen.cam.InspectionOperationTransformBuilder.Result
move
Move - Interface in nxopen.cam
Represents a Move
To obtain an instance of this class use
MoveCollection
Created in NX5.0.0
MOVE - Static variable in class nxopen.cam.OperationTransformBuilder.Result
move
move() - Method in interface nxopen.cam.ToolPathEditorBuilder
Move
License requirements: cam_base ("CAM BASE")
.
move(Point3d, boolean) - Method in interface nxopen.features.subdivision.CageManipulatorData
move(Point3d, Point, boolean) - Method in interface nxopen.features.subdivision.CageManipulatorData
Moves the objects by dragging.
MOVE - Static variable in class nxopen.mechatronics.ComparisonResult.Category
Move category
move() - Method in interface nxopen.motion.MarkerToNodeData
Returns whether to move the marker to node
License requirements: mechanisms ("MECHANISMS")
.
MOVE - Static variable in class nxopen.sim.IsvControlPanelBuilder.SingleStepType
Move
MOVE - Static variable in class nxopen.tooling.LayoutBuilder.XrefNum
Move type
MOVE - Static variable in class nxopen.tooling.LayoutBuilder.YrefNum
Move type
MOVE - Static variable in class nxopen.tooling.LayoutRepositionBuilder.Type
Move type
MOVE - Static variable in class nxopen.weld.AutoPointBuilder.Types
move existing points
MOVE_AND_ADAPT - Static variable in class nxopen.features.AdmMoveFaceBuilder.MoveOptionType
Option equates to standard Move Face.
MOVE_CONFLICT - Static variable in class nxopen.mechatronics.ComparisonResult.Category
Conflict from Move category
MOVE_MACHINE - Static variable in class nxopen.cam.InspectionCmmCommandBuilder.CommandTypes
Enter a statement to move the machine
MOVE_OBJECTS_TO_WORK_LAYER - Static variable in class nxopen.DisplayManager.LayerSetting
Move the objects to work layer if they are in invisible layer
MOVE_ORIGINAL - Static variable in class nxopen.features.MoveObjectBuilder.MoveObjectResultOptions
move objects
MOVE_ORIGINAL - Static variable in class nxopen.routing.TransformPathBuilder.TransformOption
Move the selected entities.
MOVE_PART - Static variable in class nxopen.routing.DesignRuleViolationCollection.Reason
MOVE_PATH - Static variable in class nxopen.routing.DesignRuleViolationCollection.Reason
moveAlongFace() - Method in interface nxopen.features.CoaxialBuilder
Returns the move along face.
moveAlongFace() - Method in interface nxopen.features.ParallelBuilder
Returns the move along face.
moveAlongFace() - Method in interface nxopen.features.PerpendicularBuilder
Returns the move along faces
License requirements: None.
moveAlongFace() - Method in interface nxopen.features.SymmetricBuilder
Returns the move along face.
moveAlongFace() - Method in interface nxopen.features.TangentBuilder
Returns the move along faces
License requirements: None.
MoveBuilder - Interface in nxopen.cam
Represents Move Builder
This cannot be instantiated
.
MoveBuilder.Feed - Class in nxopen.cam
the feed Type
MoveBuilder.Motion - Class in nxopen.cam
the motion Type
moveButton() - Method in interface nxopen.cae.CorrelFineTuneAlignmentBuilder
The move button to nudge alignment by the defined distance along the selected distance vector
License requirements: nx_correl_base ("FE Correlation")
.
MoveCollection - Interface in nxopen.cam
Represents the move collection
To obtain an instance of this class, refer to
Operation
Created in NX5.0.0
moveComponent(Component, Vector3d, Matrix3x3) - Method in interface nxopen.assemblies.ComponentAssembly
Moves a component by specifying a translation and rotation.
moveContent() - Method in interface nxopen.drawings.DrawingRegionBuilder
Returns the move content
License requirements: None.
moveCopyInstance() - Method in interface nxopen.cam.InspectionOperationTransformBuilder
Returns the move copy instance option
License requirements: None.
moveCopyInstance() - Method in interface nxopen.cam.OperationTransformBuilder
Returns the move copy instance option
License requirements: None.
MoveCurve - Interface in nxopen.features
Represents a move curve feature
To create or edit an instance of this class, use
MoveCurveBuilder
Created in NX9.0.0
MoveCurveBuilder - Interface in nxopen.features
moveCurves(NXObject[]) - Method in interface nxopen.tooling.TraverseLoopBuilder
Move extract curves that are not parting lines to the invisible layer.
MOVED_ALONG_GUIDE - Static variable in class nxopen.weld.JointmarkPointsBuilder.PointPosition
User moved point from default location along the guide curve
MOVED_OFF_GUIDE - Static variable in class nxopen.weld.JointmarkPointsBuilder.PointPosition
User moved point from default location off the guide curve
moveDelta(double, double) - Method in interface nxopen.weld.WeldFillStripBuilder
Moves the fill strip the input length and width values.
moveDirection() - Method in interface nxopen.cam.FollowPartMoveBuilder
Returns the move direction
License requirements: None.
moveDirectionTag - Variable in class nxopen.uf.UFModl.MatchedgeData
moveDisplayableObjects(int, DisplayableObject[]) - Method in interface nxopen.layer.LayerManager
Moves displayable objects to the specified layer.
moveDown(SearchTerm) - Method in interface nxopen.assemblies.SubsetRecipe
Move a
SearchTerm
down to another location in the recipe.
moveDown(int) - Method in interface nxopen.cam.HolderSectionBuilder
Move down a holder section item
License requirements: None.
moveDown(int) - Method in interface nxopen.cam.InterpolateAngle
Move down an item
License requirements: None.
moveDown(int) - Method in interface nxopen.cam.InterpolateVector
Move down an item
License requirements: None.
moveDown(int) - Method in interface nxopen.cam.MillingTrackpointBuilder
Move down a trackpoint
License requirements: None.
moveDown(int) - Method in interface nxopen.cam.MultipleStepoverBuilder
Move down a item
License requirements: cam_base ("CAM BASE")
.
moveDown(int) - Method in interface nxopen.cam.StepParamsBuilder
Move down a step params item
License requirements: None.
moveDown(int) - Method in interface nxopen.cam.TurnAvoidancePathPointsBuilder
Move down a avoidance path point
License requirements: None.
moveDown(int) - Method in interface nxopen.cam.TurnRoughVariableIncrementBuilder
Move down a selected item
License requirements: cam_base ("CAM BASE")
.
moveDownAttributes(FamilyAttribute[], int) - Method in interface nxopen.partfamily.TemplateManager
Move down the specified attributes of a part family by the moveDownCount.
moveDownYCurves(int[]) - Method in interface nxopen.motion.GraphBuilder
Move down the curves in the y curve list by one step
License requirements: mechanisms ("MECHANISMS")
.
moveDumbGeometry() - Method in interface nxopen.positioning.ComponentPositioner
Returns the flag that enables the positioner to reposition dumb geometry.
MoveEdge - Interface in nxopen.features
Represents a move edge feature
To create or edit an instance of this class, use
MoveEdgeBuilder
Created in NX9.0.0
MoveEdgeBuilder - Interface in nxopen.features
MoveEdgeBuilder.EndFaceBehaviorType - Class in nxopen.features
Represents the end face behavior.
moveEnd() - Method in interface nxopen.cam.VectorDistanceMoveBuilder
Returns the move end type
License requirements: None.
moveEntry(ContextMenuEntry, int) - Method in interface nxopen.menubar.ContextMenu
Reorders the menu to move a menu entry to a new position in the list.
MoveFace - Interface in nxopen.features
Represents a move face feature , don't use it until nx502
To create or edit an instance of this class, use
MoveFaceBuilder
Created in NX5.0.2
MoveFaceBuilder - Interface in nxopen.features
Represents a builder for a move face feature, don't use it until nx502.
MoveFaceBuilder.Types - Class in nxopen.features
the move face types, don't use it until nx502
moveFaceCollector() - Method in interface nxopen.features.MoveFaceBuilder
Returns the face collector holding the faces to move
License requirements: None.
moveFeature(Tag[], int, double[][]) - Method in interface nxopen.uf.UFModeling
moveFolderObject(PMNavFolderObject, PMNavFolderObject) - Method in interface nxopen.mechatronics.PMNavFolderLocator
Move the folder object
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
moveHandle() - Method in interface nxopen.geometricutilities.ModlMotion
moveLinearAxis(UFVariant, String, double, double) - Method in interface nxopen.uf.UFSim
moveLoadcaseDown(int) - Method in interface nxopen.cae.DurabilityResultPathBuilder
Moves a loadcase down by index.
moveLoadcaseUp(int) - Method in interface nxopen.cae.DurabilityResultPathBuilder
Moves a loadcase up by index.
moveMargin(double) - Method in interface nxopen.annotations.OrdinateMargin
Moves an ordinate margin object by specifying a new offset from the margin origin.
moveMeasurementPoints() - Method in interface nxopen.cam.InspectionCollisionAvoidanceBuilder
Returns a flag to indicate whether to move measurement points to avoid collisions
License requirements: None.
movementArbitraryPlane() - Method in interface nxopen.features.StudioXformBuilderEx
Returns the movement arbitrary plane
License requirements: None.
movementArbitraryVector() - Method in interface nxopen.features.StudioXformBuilderEx
Returns the movement arbitrary vector
License requirements: None.
movementDirection() - Method in interface nxopen.features.EdgeSymmetryBuilder
Returns the value indicating the direction of pole movement during match
License requirements: None.
movementMethod() - Method in interface nxopen.features.EdgeSymmetryBuilder
Returns the pole movement method to be used in matching process
License requirements: None.
movementMethod() - Method in interface nxopen.features.PolylineBuilder
Returns the movement method
License requirements: None.
movementMethod() - Method in interface nxopen.features.StudioSplineBuilderEx
Returns the movement method
License requirements: None.
movementMethod() - Method in interface nxopen.features.StudioXformBuilderEx
Returns the movement method
License requirements: None.
movementMethod() - Method in interface nxopen.features.subdivision.TransformCageData
Returns the movement method.
movementMethod() - Method in interface nxopen.geometricutilities.CurveShapingBuilder
Returns the movement method
License requirements: None.
movementPlane() - Method in interface nxopen.features.PolylineBuilder
Returns the movement plane
License requirements: None.
movementPlane() - Method in interface nxopen.features.StudioSplineBuilderEx
Returns the movement plane
License requirements: None.
movementPlane() - Method in interface nxopen.features.subdivision.TransformCageData
Returns the movement plane.
movementPlane() - Method in interface nxopen.geometricutilities.CurveShapingBuilder
Returns the movement plane
License requirements: None.
movementVector() - Method in interface nxopen.features.PoleSmoothingBuilder
movementVector() - Method in interface nxopen.features.PolylineBuilder
Returns the movement vector
License requirements: None.
movementVector() - Method in interface nxopen.features.StudioSplineBuilderEx
Returns the movement vector
License requirements: None.
movementVector() - Method in interface nxopen.features.subdivision.TransformCageData
Returns the movement vector.
movementVector() - Method in interface nxopen.geometricutilities.CurveShapingBuilder
Returns the movement vector
License requirements: None.
moveMethod() - Method in interface nxopen.geometricutilities.MovePoleBuilder
Returns the control pole move method
License requirements: None.
moveMinimumDistance() - Method in interface nxopen.weld.DatumSurfaceBuilder
Moves a point to the nearest location on the resting face
License requirements: ugweld ("UG WELD")
.
moveNode(Point, Point3d) - Method in interface nxopen.features.RapidSurfaceBuilder
Moves node
License requirements: studio_free_form ("STUDIO FREE FORM")
.
MoveObject - Interface in nxopen.features
Represents a Move-Object feature
To create or edit an instance of this class, use
MoveObjectBuilder
Created in NX6.0.0
moveObject() - Method in interface nxopen.SketchPasteBuilder
Returns the move object
License requirements: None.
MoveObjectBuilder - Interface in nxopen.features
MoveObjectBuilder.LayerOptionType - Class in nxopen.features
Indicates the layer on which moved or copied objects will be placed
MoveObjectBuilder.MoveObjectResultOptions - Class in nxopen.features
Indicates whether to move or copy objects
moveObjectResult() - Method in interface nxopen.features.MoveObjectBuilder
Returns the move rotate result
License requirements: None.
moveObjects(CAMSetup.View, CAMObject[], CAMObject, CAMSetup.Paste) - Method in interface nxopen.cam.CAMSetup
Move objects
License requirements: cam_base ("CAM BASE")
.
moveObjects(CAMSetup.View, CAMObject[], CAMObject, CAMSetup.Paste) - Method in interface nxopen.cam.InspectionSetup
Move objects
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
moveObjects(TaggedObject[]) - Method in interface nxopen.mechatronics.PMNavFolderObject
Moves physics objects.
moveObjectsState() - Method in interface nxopen.positioning.Network
Returns
the move objects state for the network.
moveOnlySelectedPoles() - Method in interface nxopen.features.PoleSmoothingBuilder
Returns the indicator to move only selected poles
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
moveOption() - Method in interface nxopen.features.AdmMoveFaceBuilder
Returns the move option.
moveOrCopyOption() - Method in interface nxopen.routing.TransformPathBuilder
Returns the operation to perform during the commit method.
moveParents() - Method in interface nxopen.features.MoveObjectBuilder
Returns the move parents flag.
movePoint(Point3d) - Method in interface nxopen.weld.WeldPointBuilder
Move selected points
License requirements: ugweld ("UG WELD")
.
movePole() - Method in interface nxopen.features.GlobalShapingBuilder
Returns the move pole
License requirements: None.
MovePoleBuilder - Interface in nxopen.geometricutilities
This class manages the control poles movements for a surface or curve.
MovePoleBuilder.MoveMethodType - Class in nxopen.geometricutilities
Move Pole types
MovePoleBuilder.WCSDirectionType - Class in nxopen.geometricutilities
WCS direction
moveReusableComponent(Vector3d, Matrix3x3, int) - Method in interface nxopen.tooling.AddReusablePart
Moves a reusable component to a selected position
License requirements: None.
moveRotaryAxis(UFVariant, String, double, double) - Method in interface nxopen.uf.UFSim
moveSectionOrigin(Curve, Point3d, int) - Method in interface nxopen.die.AddendumSectionBuilder
Moves addendum section to a new location.
moveSegment(SectionLineSegmentPointBuilder, Point) - Method in interface nxopen.drawings.SectionLineSegmentPointListBuilder
moveSharpEdge() - Method in interface nxopen.features.EdgeBlendBuilder
Returns the Maintain blend and move sharp edges option
License requirements: None.
moveStartPoint() - Method in interface nxopen.cam.ToolPathEditorBuilder
Returns the move start point
License requirements: None.
moveStep(SimSolutionStep, SimSolution.StepPosition, SimSolutionStep) - Method in interface nxopen.cae.SimSolution
Moves step to the specified position
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
moveStep(Tag, Tag) - Method in interface nxopen.uf.UFAssem
moveSxlineRotpt(Tag, UFDrf.Object) - Method in interface nxopen.uf.UFDraw
moveSxlineSxseg(Tag, UFDrf.Object) - Method in interface nxopen.uf.UFDraw
moveSxseg(Tag, UFDraw.SxlineSxsegs) - Method in interface nxopen.uf.UFDraw
moveToBottom(int) - Method in interface nxopen.annotations.ArbitraryAreaSeedBuilderList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.annotations.DatumReferenceBuilderList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.annotations.FeatureControlFrameDataBuilderList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.annotations.LeaderDataList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.annotations.MasterSymbolListItemBuilderList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.annotations.SymbolCatalogParameterBuilderList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.annotations.TitleBlockCellBuilderList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.assemblies.PartitionList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.BodyList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.cae.DependentMeshListItemBuilderList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.cae.ManualSweepBetweenListItemSelectionList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.cae.MeshManualSweepBetweenListItemSelectionList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.cam.BoundaryMemberSetList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.cam.BoundarySetList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.cam.BoundaryTurnVariableStockSetList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.cam.CAMFeatureList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.cam.CollisionPairBuilderList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.cam.CustomLoopSetList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.cam.CutVolumeList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.cam.DriveChainItemBuilderList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.cam.GeometrySetList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.cam.HoldingSystemBuilderList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.cam.HoleBossSetList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.cam.InPathEventDataBuilderList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.cam.LaserControlPointList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.cam.ManualFeatureBuilderList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.cam.SplitterList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.cam.SurfaceDriveGeometrySetList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.cam.TabPointDataBuilderList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.cam.ThreadedBossSetList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.cam.ThreadedHoleSetList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.cam.ToolPathSplitItemBuilderList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.cam.UdeList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.cam.WedmCustomBoundaryDataBuilderList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.cam.WireGuideList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.DateItemBuilderList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.die.DieAssistantFlangeProfileList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.die.DieAssistantTrimProfileList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.die.DieBooleanBuilderList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.die.DieLimitsBuilderList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.die.DieLocationBuilderList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.die.DrawBeadSegmentBuilderList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.die.PierceItemBuilderList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.drafting.AttributeItemBuilderList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.drafting.PrimaryContentItemBuilderList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.drawings.SectionLineSegmentBuilderList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilderList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.drawings.ViewStyleShipbuildingLinesBuilderList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.ExpressionCollectorSetList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.ExpressionSectionSetList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.features.GlobalShapingCurveOffsetBuilderList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.features.GlobalShapingPointOffsetBuilderList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.features.PartGeometryCopySelectBuilderList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.features.PointSetFacePercentageBuilderList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.features.sheetmetal.SMBoundaryConditionBuilderList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.features.shipdesign.AnchorPointList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.features.shipdesign.BulkHeadListItemBuilderList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.features.shipdesign.CornerCutListItemBuilderList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.features.shipdesign.DeckListItemBuilderList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.features.shipdesign.ItFrameListItemBuilderList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.features.shipdesign.OrientationRegionItemBuilderList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.features.shipdesign.PlaneListBuilderList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.features.shipdesign.SeamBlockBuilderList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.features.shipdesign.SectionViewBuilderList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.features.shipdesign.ShipNamesBuilderList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.features.shipdesign.StandardPartItemBuilderList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.features.shipdesign.SteelInsulationBoundaryBuilderList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.features.shipdesign.SubSystemBuilderList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.features.shipdesign.TransFrameListItemBuilderList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.features.SmoothRangeBuilderList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.features.subdivision.CageSectionDataList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.features.VariableRadiusPointsBuilderList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.features.vehicledesign.CloseRangeCameraListItemBuilderList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.features.vehicledesign.CloseRangeDemoCylinderListItemBuilderList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.fields.PathObjectsList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.geometricutilities.BlendSetbackBuilderList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.geometricutilities.BoundaryDefinitionBuilderList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.geometricutilities.BoundingObjectBuilderList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.geometricutilities.EntityUsageInfoList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.geometricutilities.FaceSetOffsetList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.geometricutilities.FtmFixedCurvesBuilderList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.geometricutilities.FtmTransformCurvesBuilderList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.geometricutilities.FtmTransformPointsBuilderList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.geometricutilities.InstanceEditedExpressionItemList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.geometricutilities.ParentEquivalencyMapList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.geometricutilities.PatternIncrementItemList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.geometricutilities.PatternSpacingsListItemList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.geometricutilities.ReduceSurfaceRadiusFaceGroupBuilderList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.geometricutilities.RotationSetBuilderList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.geometricutilities.ScalingSetBuilderList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.geometricutilities.SelectionListList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.geometricutilities.StyledSweepDoubleOnPathDimBuilderList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.geometricutilities.TransitionCurveBuilderList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.geometricutilities.TransitionLawNodeBuilderList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.geometricutilities.TwoExpressionsCollectorSetList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.geometricutilities.TwoExpressionsSectionSetList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.ListCreatorList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.mechatronics.ExternalConnectionElementBuilderList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.mechatronics.GanttOperationConditionBuilderList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.mechatronics.GanttOperationParameterBuilderList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.mechatronics.PathConstraintFrameBuilderList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.mechatronics.ProxyObjectParameterBuilderList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.mechatronics.RuntimeFormulaParameterBuilderList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.mechatronics.SHMSignalConnectionBuilderList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.mechatronics.SignalConnectionBuilderList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.motion.SignalChartListItemList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.NXObjectList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.ObjectList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.PlaneList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.PointList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.RegionPointList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.routing.RunItemsBuilderList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.ScCollectorList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.SectionList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.sim.KinematicChainList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.sim.KinematicJunctionBuilderList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.TaggedObjectList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.tooling.SelectReuseLibraryListItemBuilderList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.tooling.ShimInnerProfileSetBuilderList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.weld.JointItemBuilderList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.weld.JointmarkFaceSetsBuilderList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.weld.JointmarkGuideBuilderList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.weld.JointmarkPointsBuilderList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.weld.WeldBeadPathBuilderList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.weld.WeldBeadSizeBuilderList
Move object at the specified location to the bottom of the list.
moveToBottom(int) - Method in interface nxopen.weld.WeldFillStripBuilderList
Move object at the specified location to the bottom of the list.
moveToCenter() - Method in interface nxopen.weld.DatumPinBuilder
Moves a point to the center of a circle or slot boundary
License requirements: ugweld ("UG WELD")
.
moveToClearancePlane() - Method in interface nxopen.cam.ToolPathEditorBuilder
Move to clearance plane
License requirements: cam_base ("CAM BASE")
.
moveToDefaultLayer(DynamicSection[]) - Method in interface nxopen.display.DynamicSectionCollection
Moves the specified dynamic sections in the part to default layer.
MoveToDrawingViewBuilder - Interface in nxopen.drafting
moveToModel(DisplayableObject[]) - Method in interface nxopen.ViewDependentDisplayManager
Moves view objects to model.
moveToPoint(Point3d) - Method in interface nxopen.weld.WeldFillStripBuilder
Moves the fill strip to the input center.
MoveToPointBuilder - Interface in nxopen.cam
moveToTop(int) - Method in interface nxopen.annotations.ArbitraryAreaSeedBuilderList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.annotations.DatumReferenceBuilderList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.annotations.FeatureControlFrameDataBuilderList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.annotations.LeaderDataList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.annotations.MasterSymbolListItemBuilderList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.annotations.SymbolCatalogParameterBuilderList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.annotations.TitleBlockCellBuilderList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.assemblies.PartitionList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.BodyList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.cae.DependentMeshListItemBuilderList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.cae.ManualSweepBetweenListItemSelectionList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.cae.MeshManualSweepBetweenListItemSelectionList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.cam.BoundaryMemberSetList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.cam.BoundarySetList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.cam.BoundaryTurnVariableStockSetList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.cam.CAMFeatureList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.cam.CollisionPairBuilderList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.cam.CustomLoopSetList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.cam.CutVolumeList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.cam.DriveChainItemBuilderList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.cam.GeometrySetList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.cam.HoldingSystemBuilderList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.cam.HoleBossSetList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.cam.InPathEventDataBuilderList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.cam.LaserControlPointList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.cam.ManualFeatureBuilderList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.cam.SplitterList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.cam.SurfaceDriveGeometrySetList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.cam.TabPointDataBuilderList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.cam.ThreadedBossSetList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.cam.ThreadedHoleSetList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.cam.ToolPathSplitItemBuilderList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.cam.UdeList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.cam.WedmCustomBoundaryDataBuilderList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.cam.WireGuideList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.DateItemBuilderList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.die.DieAssistantFlangeProfileList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.die.DieAssistantTrimProfileList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.die.DieBooleanBuilderList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.die.DieLimitsBuilderList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.die.DieLocationBuilderList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.die.DrawBeadSegmentBuilderList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.die.PierceItemBuilderList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.drafting.AttributeItemBuilderList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.drafting.PrimaryContentItemBuilderList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.drawings.SectionLineSegmentBuilderList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilderList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.drawings.ViewStyleShipbuildingLinesBuilderList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.ExpressionCollectorSetList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.ExpressionSectionSetList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.features.GlobalShapingCurveOffsetBuilderList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.features.GlobalShapingPointOffsetBuilderList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.features.PartGeometryCopySelectBuilderList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.features.PointSetFacePercentageBuilderList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.features.sheetmetal.SMBoundaryConditionBuilderList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.features.shipdesign.AnchorPointList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.features.shipdesign.BulkHeadListItemBuilderList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.features.shipdesign.CornerCutListItemBuilderList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.features.shipdesign.DeckListItemBuilderList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.features.shipdesign.ItFrameListItemBuilderList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.features.shipdesign.OrientationRegionItemBuilderList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.features.shipdesign.PlaneListBuilderList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.features.shipdesign.SeamBlockBuilderList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.features.shipdesign.SectionViewBuilderList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.features.shipdesign.ShipNamesBuilderList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.features.shipdesign.StandardPartItemBuilderList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.features.shipdesign.SteelInsulationBoundaryBuilderList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.features.shipdesign.SubSystemBuilderList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.features.shipdesign.TransFrameListItemBuilderList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.features.SmoothRangeBuilderList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.features.subdivision.CageSectionDataList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.features.VariableRadiusPointsBuilderList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.features.vehicledesign.CloseRangeCameraListItemBuilderList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.features.vehicledesign.CloseRangeDemoCylinderListItemBuilderList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.fields.PathObjectsList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.geometricutilities.BlendSetbackBuilderList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.geometricutilities.BoundaryDefinitionBuilderList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.geometricutilities.BoundingObjectBuilderList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.geometricutilities.EntityUsageInfoList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.geometricutilities.FaceSetOffsetList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.geometricutilities.FtmFixedCurvesBuilderList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.geometricutilities.FtmTransformCurvesBuilderList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.geometricutilities.FtmTransformPointsBuilderList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.geometricutilities.InstanceEditedExpressionItemList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.geometricutilities.ParentEquivalencyMapList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.geometricutilities.PatternIncrementItemList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.geometricutilities.PatternSpacingsListItemList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.geometricutilities.ReduceSurfaceRadiusFaceGroupBuilderList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.geometricutilities.RotationSetBuilderList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.geometricutilities.ScalingSetBuilderList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.geometricutilities.SelectionListList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.geometricutilities.StyledSweepDoubleOnPathDimBuilderList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.geometricutilities.TransitionCurveBuilderList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.geometricutilities.TransitionLawNodeBuilderList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.geometricutilities.TwoExpressionsCollectorSetList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.geometricutilities.TwoExpressionsSectionSetList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.ListCreatorList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.mechatronics.ExternalConnectionElementBuilderList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.mechatronics.GanttOperationConditionBuilderList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.mechatronics.GanttOperationParameterBuilderList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.mechatronics.PathConstraintFrameBuilderList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.mechatronics.ProxyObjectParameterBuilderList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.mechatronics.RuntimeFormulaParameterBuilderList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.mechatronics.SHMSignalConnectionBuilderList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.mechatronics.SignalConnectionBuilderList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.motion.SignalChartListItemList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.NXObjectList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.ObjectList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.PlaneList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.PointList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.RegionPointList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.routing.RunItemsBuilderList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.ScCollectorList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.SectionList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.sim.KinematicChainList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.sim.KinematicJunctionBuilderList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.TaggedObjectList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.tooling.SelectReuseLibraryListItemBuilderList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.tooling.ShimInnerProfileSetBuilderList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.weld.JointItemBuilderList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.weld.JointmarkFaceSetsBuilderList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.weld.JointmarkGuideBuilderList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.weld.JointmarkPointsBuilderList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.weld.WeldBeadPathBuilderList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.weld.WeldBeadSizeBuilderList
Move object at the specified location to the top of the list.
moveToTop(int) - Method in interface nxopen.weld.WeldFillStripBuilderList
Move object at the specified location to the top of the list.
moveToView(DisplayableObject[]) - Method in interface nxopen.ViewDependentDisplayManager
Moves model objects to view.
moveType() - Method in interface nxopen.cam.InspectionCmmCommandBuilder
Returns the move type
License requirements: None.
moveType() - Method in interface nxopen.cam.LaserLinearMove
Returns the Move Type
License requirements: None.
moveType() - Method in interface nxopen.cam.NormalToToolAxisMoveBuilder
Returns the normal type
License requirements: None.
moveType() - Method in interface nxopen.cam.TeachmodeLinearMoveBuilder
Returns the Movement Type
License requirements: None.
moveType() - Method in interface nxopen.cam.TurnThreadEngageRetractBuilder
Returns the Move Type
License requirements: None.
moveUp(SearchTerm) - Method in interface nxopen.assemblies.SubsetRecipe
Move a
SearchTerm
up to another location in the recipe.
moveUp(int) - Method in interface nxopen.cam.HolderSectionBuilder
Move up a holder section item
License requirements: None.
moveUp(int) - Method in interface nxopen.cam.InterpolateAngle
Move up an item
License requirements: None.
moveUp(int) - Method in interface nxopen.cam.InterpolateVector
Move up an item
License requirements: None.
moveUp(int) - Method in interface nxopen.cam.MillingTrackpointBuilder
Move up a trackpoint
License requirements: None.
moveUp(int) - Method in interface nxopen.cam.MultipleStepoverBuilder
Move up a item
License requirements: cam_base ("CAM BASE")
.
moveUp(int) - Method in interface nxopen.cam.StepParamsBuilder
Move up a step params item
License requirements: None.
moveUp(int) - Method in interface nxopen.cam.TurnAvoidancePathPointsBuilder
Move up a avoidance path point
License requirements: None.
moveUp(int) - Method in interface nxopen.cam.TurnRoughVariableIncrementBuilder
Move up a selected item
License requirements: cam_base ("CAM BASE")
.
moveUpAttributes(FamilyAttribute[], int) - Method in interface nxopen.partfamily.TemplateManager
Move up the specified attributes of a part family by the moveUpCount.
moveUpYCurves(int[]) - Method in interface nxopen.motion.GraphBuilder
Move up the curves in the y curve list by one step
License requirements: mechanisms ("MECHANISMS")
.
moveView(Point3d) - Method in interface nxopen.drawings.DraftingView
Sets the view origin at the provided location.
moveView(Tag, double[]) - Method in interface nxopen.uf.UFDraw
moveViewsToDrawing(DraftingView[], DrawingSheet) - Method in interface nxopen.drawings.DraftingViewCollection
Move views to drawing
License requirements: drafting ("DRAFTING")
.
moveViewToDrawing(Tag, Tag) - Method in interface nxopen.uf.UFDraw
moveWithExtensionSegments() - Method in interface nxopen.routing.TransformPathBuilder
Returns a message stating whether or not to move the selected segments with extension segments.
MovieManager - Interface in nxopen
movieManager() - Method in interface nxopen.UI
the Movie Manager class.
MovieSettingsBuilder - Interface in nxopen
This class is the builder for the Movie Settings.
MovieSettingsBuilder.CaptureAreaChoices - Class in nxopen
Indicates the are being recorded in the movie.
MovieSettingsBuilder.PlaybackSpeedChoices - Class in nxopen
Indicates the playback speed of the movie.
movingFace() - Method in interface nxopen.features.sheetmetal.MigratedPanelBuilder
Returns
the parent moving face.
mpi - Variable in class nxopen.uf.UFDrf.AskObjectPreferencesData
mpi - Variable in class nxopen.uf.UFDrf.AskPreferencesData
mpr - Variable in class nxopen.uf.UFDrf.AskObjectPreferencesData
mpr - Variable in class nxopen.uf.UFDrf.AskPreferencesData
mpreview() - Method in interface nxopen.cam.DPMItpBuilder
Preview drive path
License requirements: cam_base ("CAM BASE")
.
mrshape() - Method in interface nxopen.cam.SimulationOptionsBuilder
Returns the tool shape for material removal
License requirements: None.
msao() - Method in interface nxopen.UFSession
msetPart() - Method in interface nxopen.tooling.ElectrodeBlankBuilder
Returns the current machine set under which a blank is added.
MSEXCEL - Static variable in class nxopen.issue.IssueAttachment.Type
Microsoft Excel type
MSF - Static variable in class nxopen.cae.CorrelShapemetrictype
Shape metric type is Modal Scale Factors
msgNcCommand(UFVariant, String) - Method in interface nxopen.uf.UFSim
msgProgramMark(UFVariant, String) - Method in interface nxopen.uf.UFSim
msgUserFeedback(UFVariant, String) - Method in interface nxopen.uf.UFSim
MSHVLD_CORNER_MID_NODE_OVERLAP - Static variable in class nxopen.uf.UFSf.MeshErrorType
MSHVLD_DUPLICATE_NODE_LABEL - Static variable in class nxopen.uf.UFSf.MeshErrorType
MSHVLD_EDGE_DENSITY_NOT_HONORED - Static variable in class nxopen.uf.UFSf.MeshErrorType
MSHVLD_EDGE_DENSITY_NOT_HONORED_FOR_MATCH_MATE_PNRS - Static variable in class nxopen.uf.UFSf.MeshErrorType
MSHVLD_EDGE_FACE_DENSITY_NOT_HONORED - Static variable in class nxopen.uf.UFSf.MeshErrorType
MSHVLD_FACE_DENSITY_NOT_HONORED - Static variable in class nxopen.uf.UFSf.MeshErrorType
MSHVLD_FACE_DENSITY_NOT_HONORED_FOR_MATE_PNRS - Static variable in class nxopen.uf.UFSf.MeshErrorType
MSHVLD_HARD_PNT_NOT_HONORED - Static variable in class nxopen.uf.UFSf.MeshErrorType
MSHVLD_INVALID1D_CONNECT_ELEM - Static variable in class nxopen.uf.UFSf.MeshErrorType
MSHVLD_INVALID1D_CONTACT_ELEM - Static variable in class nxopen.uf.UFSf.MeshErrorType
MSHVLD_INVALID1D_WELD_ELEM - Static variable in class nxopen.uf.UFSf.MeshErrorType
MSHVLD_INVALID_CORNER_MID_NODE_ORDER - Static variable in class nxopen.uf.UFSf.MeshErrorType
MSHVLD_INVALID_EDGE_LIMIT - Static variable in class nxopen.uf.UFSf.MeshErrorType
MSHVLD_INVALID_EDGE_MATE_FOR_MMC - Static variable in class nxopen.uf.UFSf.MeshErrorType
MSHVLD_INVALID_ELEM_NODE_NUM - Static variable in class nxopen.uf.UFSf.MeshErrorType
MSHVLD_INVALID_ELEM_OWNER - Static variable in class nxopen.uf.UFSf.MeshErrorType
MSHVLD_INVALID_END_NODE_ASSOCIATIVITY - Static variable in class nxopen.uf.UFSf.MeshErrorType
MSHVLD_INVALID_FREE_MATE_EDGE_MESH - Static variable in class nxopen.uf.UFSf.MeshErrorType
MSHVLD_INVALID_FREE_MATE_FACE_MESH - Static variable in class nxopen.uf.UFSf.MeshErrorType
MSHVLD_INVALID_GLUE_MATE_EDGE_MESH - Static variable in class nxopen.uf.UFSf.MeshErrorType
MSHVLD_INVALID_GLUE_MATE_FACE_MESH - Static variable in class nxopen.uf.UFSf.MeshErrorType
MSHVLD_INVALID_MATCH_EDGE_MESH - Static variable in class nxopen.uf.UFSf.MeshErrorType
MSHVLD_INVALID_MATCH_MATE_EDGE_MESH - Static variable in class nxopen.uf.UFSf.MeshErrorType
MSHVLD_INVALID_NODE_BTYPE - Static variable in class nxopen.uf.UFSf.MeshErrorType
MSHVLD_INVALID_NODE_OWNER - Static variable in class nxopen.uf.UFSf.MeshErrorType
MSHVLD_MESH_NOT_ASSOCIATED_TO_MR - Static variable in class nxopen.uf.UFSf.MeshErrorType
MSHVLD_MESH_WITH_DIFF_DIM_ELEM - Static variable in class nxopen.uf.UFSf.MeshErrorType
MSHVLD_MESH_WITH_NO_ELEM - Static variable in class nxopen.uf.UFSf.MeshErrorType
MSHVLD_MESH_WITH_PENDING_UPDATE - Static variable in class nxopen.uf.UFSf.MeshErrorType
MSHVLD_MID_NODE_NOT_PROPERLY_SET - Static variable in class nxopen.uf.UFSf.MeshErrorType
MSHVLD_MR_WITH_NO_MG - Static variable in class nxopen.uf.UFSf.MeshErrorType
MSHVLD_NODE_ASSOCIATED_TO_CHILD_FACE - Static variable in class nxopen.uf.UFSf.MeshErrorType
MSHVLD_NODE_ASSOCIATED_TO_INTERIOR_EDGE - Static variable in class nxopen.uf.UFSf.MeshErrorType
MSHVLD_NODE_ASSOCIATED_TO_TINY_EDGE - Static variable in class nxopen.uf.UFSf.MeshErrorType
MSHVLD_NODE_NOT_ASSOCIATED_TO_MG - Static variable in class nxopen.uf.UFSf.MeshErrorType
MSHVLD_NODE_SHARED_BY_MULTIPLE_COLLECTORS - Static variable in class nxopen.uf.UFSf.MeshErrorType
MSHVLD_NOT_CLASSIFIED - Static variable in class nxopen.uf.UFSf.MeshErrorType
MSHVLD_ORPHAN_NODE - Static variable in class nxopen.uf.UFSf.MeshErrorType
MSPOWER_POINT - Static variable in class nxopen.issue.IssueAttachment.Type
Microsoft Power Point type
msType() - Method in interface nxopen.motion.PackagingMeasureBuilder
MSWORD - Static variable in class nxopen.issue.IssueAttachment.Type
Microsoft Word type
MTD - Static variable in class nxopen.sim.SimDebugBuilder.DriverType
MTD driver
mtdInit(UFVariant) - Method in interface nxopen.uf.UFSim
mtdReset(UFVariant) - Method in interface nxopen.uf.UFSim
mtx2() - Method in interface nxopen.UFSession
mtx3() - Method in interface nxopen.UFSession
mtx4(double[]) - Method in interface nxopen.uf.UFMtx3
mtx4() - Method in interface nxopen.UFSession
mtype() - Method in interface nxopen.MeasureDistanceBuilder
Returns the mtype
License requirements: None.
muDynamic() - Method in interface nxopen.motion.JointFrictionAdams
muDynamic() - Method in interface nxopen.motion.JointFrictionLms
Returns the mu dynamic
License requirements: None.
muDynamic() - Method in interface nxopen.motion.JointFrictionRecurDyn
muDynamicExpression() - Method in interface nxopen.motion.JointFrictionAdams
Returns the mu dynamic expression
License requirements: None.
muDynamicExpression() - Method in interface nxopen.motion.JointFrictionRecurDyn
Returns the mu dynamic expression
License requirements: None.
MULTI_CAD_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
Parts mastered in a CAD system other than NX
MULTI_CONVEX - Static variable in class nxopen.mechatronics.CollisionBodyBuilder.CollisionShapeTypes
Multi-Convex
MULTI_FACE_BLEND - Static variable in class nxopen.die.AddSurfBuilder.Methods
Face blend between sets of walls.
MULTI_LINE_TEXT - Static variable in class nxopen.uistyler.StylerItem.ItemType
Multi-line text item
MULTI_LIST - Static variable in class nxopen.uistyler.StylerItem.ItemType
Multi List item
MULTI_LOOPS_EXISTED - Static variable in class nxopen.tooling.EdgePatchBuilder.PatchStatus
More than one loops existed in list
MULTI_PROP_EXPRESSION - Static variable in class nxopen.uf.UFSf.MultiPropType
MULTI_PROP_TABLE - Static variable in class nxopen.uf.UFSf.MultiPropType
MULTI_SELECT_LIST - Static variable in class nxopen.uistyler.Dialog.ItemType
MULTI_TEXT_BOX - Static variable in class nxopen.uistyler.Dialog.ItemType
MULTI_TRANSITION - Static variable in class nxopen.geometricutilities.LawBuilder.Type
multi-transition law type
MultiBladeBaseGeometry - Interface in nxopen.cam
Represents a selectoin geometry Builder
This is an abstract class and cannot be instantiated.
MultiBladeGeomBuilder - Interface in nxopen.cam
Represents a MultiBladeGeomBuilder Builder
To create a new instance of this class, use nxopen.cam.NCGroupCollection#createMultiBladeGeometryBuilder
Created in NX7.0.0
MultiBladeGeomBuilder.PartAxisOfRotationTypes - Class in nxopen.cam
Available types for Part Axis of Rotation
MultiBladeSplittersGeometry - Interface in nxopen.cam
Represents a selectoin list geometry Builder
This is an abstract class and cannot be instantiated.
multiDepthCut() - Method in interface nxopen.cam.MillCutParameters
Returns the Multi Depth Cut
License requirements: None.
MultiDepthCut - Interface in nxopen.cam
MultiDepthCut.Types - Class in nxopen.cam
Available types for Multi-Depth cut type
MultiDraft - Interface in nxopen.geometricutilities
Represents a multi-draft.
MultiDraft.AngleOption - Class in nxopen.geometricutilities
Represents the angle option.
MultilineString - Interface in nxopen.blockstyler
Represents a Multiline String block .
multiPasses() - Method in interface nxopen.cam.TurnCutParameters
Returns the multi passes
License requirements: None.
MultiPatchAlignmentBuilder - Interface in nxopen.facet
Aligns multiple facet bodies to one another without using reference points.
MultiPatchAlignmentBuilder.ResolutionType - Class in nxopen.facet
Determines the number of facets used in the alignment.
MULTIPLE - Static variable in class nxopen.cae.AfuMathOperation.MultiType
Multiples AFU records
MULTIPLE - Static variable in class nxopen.cam.FlowBuilder.FlowOffsetModeType
Multiple Offsets
MULTIPLE - Static variable in class nxopen.cam.RoughFinishTurningBuilder.RegionMachiningTypes
Region Machining type: Multiple
MULTIPLE - Static variable in class nxopen.cam.StepoverBuilder.StepoverTypes
Multiple
multiple() - Method in interface nxopen.CGMBuilder
Returns the multiple option is used when more than one drawing is exported.
MULTIPLE - Static variable in class nxopen.features.shipdesign.PenetrationRequest.RequestType
MULTIPLE - Static variable in class nxopen.features.shipdesign.SectionDrawingBuilder.SectionsPerDrawingOptions
MULTIPLE - Static variable in class nxopen.features.ThroughCurvesBuilder.PatchTypes
multiple patches.
MULTIPLE - Static variable in class nxopen.geometricutilities.MultiDraft.AngleOption
Multi draft
MULTIPLE - Static variable in class nxopen.weld.WeldPointMethod
use guide curve(s) or edge(s) to generate spot weld points
MULTIPLE_COPLANAR_SKETCHES - Static variable in class nxopen.features.SketchConversionStatus.ReasonType
This composite curve feature is based on multiple coplanar source sketches.
MULTIPLE_CURVES - Static variable in class nxopen.cae.SimBcXyPlotBuilder.ResolveMultipleMatches
MULTIPLE_CURVES_JOINED_INTO_ONE_LINKED_CURVE - Static variable in class nxopen.features.SketchConversionStatus.ReasonType
The linked feature has atleast one linked curve that is the result of joining multiple source curves.
MULTIPLE_CUTOFF_FIRST - Static variable in class nxopen.cam.WedmGeomBuilder.BackburnPassesTypes
multiple backburn passes - cutoff first
MULTIPLE_CUTOFF_FIRST - Static variable in class nxopen.cam.WedmOperationBuilder.BackburnPassesTypes
multiple backburn passes - cutoff first
MULTIPLE_DIMENSION - Static variable in class nxopen.annotations.BaseOrdinateDimensionBuilder.Types
group or set of dimensions
MULTIPLE_FACE_BLEND - Static variable in class nxopen.die.AddendumSectionBuilder.SurfaceBuildType
Create multiple face blend surface.
MULTIPLE_FEATURES - Static variable in class nxopen.features.PatchOpeningsBuilder.OutputTypes
Output one feature for each patch sheet body
MULTIPLE_INSTANCE_OF_ASOURCE_PART - Static variable in class nxopen.features.SketchConversionStatus.ReasonType
The linked feature has at least two linked curves that come from multiple instances of the same source part.
MULTIPLE_REGION_FIRST - Static variable in class nxopen.cam.WedmGeomBuilder.BackburnPassesTypes
multiple backburn passes - region first
MULTIPLE_REGION_FIRST - Static variable in class nxopen.cam.WedmOperationBuilder.BackburnPassesTypes
multiple backburn passes - region first
MULTIPLE_SEGMENTS - Static variable in class nxopen.features.TubeBuilder.Output
multiple segments output
MULTIPLE_SKETCHES_WITH_NON_PARALLEL_NORMALS - Static variable in class nxopen.features.SketchConversionStatus.ReasonType
The linked feature has curves that come from multiple sketches whose plane normals are not parallel.
MULTIPLE_XFORM - Static variable in class nxopen.features.SketchConversionStatus.ReasonType
The linked feature has multiple linking data.
multipleBuilder() - Method in interface nxopen.cam.StepoverBuilder
Returns the multiple builder
License requirements: None.
multipleCenterMarks() - Method in interface nxopen.annotations.BaseCenterMarkBuilder
Returns the multiple center marks option, applicable only for creation
License requirements: None.
multipleCurveOrEdgeCollector() - Method in interface nxopen.features.PointSetBuilder
Returns the collector that is used to hold multiple curves or edges.
MultipleDatum() - Constructor for class nxopen.uf.UFGdt.MultipleDatum
MultipleDatum(int, Tag[], Tag) - Constructor for class nxopen.uf.UFGdt.MultipleDatum
multipleEdit() - Method in interface nxopen.blockstyler.SetList
Returns the MultipleEdit
License requirements: None.
MultipleElementCreateBuilder - Interface in nxopen.cae
multipleFaceCollector() - Method in interface nxopen.features.PointSetBuilder
Returns the collector that is used to hold faces.
MULTIPLEFLUID - Static variable in class nxopen.PhysicalMaterial.Type
Multiple fluid material
multipleFp - Variable in class nxopen.uf.UFSmd.FpPrefs
multipleMatches() - Method in interface nxopen.cae.SimBcXyPlotBuilder
MultipleNodeCreateBuilder - Interface in nxopen.cae
multiplePasses() - Method in interface nxopen.cam.PlanarMillingBuilder
Returns the Multiple Passes builder
License requirements: None.
MultiplePassesBuilder - Interface in nxopen.cam
Represents a MultiplePassesBuilder .
MultiplePassesBuilder.OrderTypes - Class in nxopen.cam
Available types for Order
MultiplePassesBuilder.StepMethodTypes - Class in nxopen.cam
Available types for Step Method
multipleSelection - Variable in class nxopen.Selection.SelectionDescriptor
MultipleStepoverBuilder - Interface in nxopen.cam
Represents a Builder which holds the data for a set of individual number of passes and
stepover distance.
MultipleStepoverBuilder.Data - Class in nxopen.cam
multipleViewPlacement() - Method in interface nxopen.drawings.DrawingViewBuilder
Returns the multiple view placement
License requirements: None.
multipleViewPlacement() - Method in interface nxopen.drawings.StandardViewsBuilder
Returns the multiple view placement
License requirements: None.
multipleViewPlacement() - Method in interface nxopen.drawings.ViewCreationWizardBuilder
Returns the multiple view placement
License requirements: None.
MultipleViewPlacementBuilder - Interface in nxopen.drawings
This builder allows the user to create a Multiple View Placement .
MultipleViewPlacementBuilder.Option - Class in nxopen.drawings
The placement option type
multiplicity - Variable in class nxopen.uf.UFCurve.Proj
multiplier() - Method in interface nxopen.mechatronics.ExternalConnectionElementBuilder
Returns the multiplier.
MULTIPLY - Static variable in class nxopen.geometricutilities.PatternIncrementItem.OperationEnum
multiply the increment to the master value.
multiply(Matrix3x3, Vector3d) - Method in interface nxopen.MathUtils
Returns a vector which is the product of a 3x3 matrix and a 3D vector
License requirements: None.
multiply(Matrix3x3, Point3d) - Method in interface nxopen.MathUtils
Returns a point which is the product of a 3x3 matrix and a 3D point
License requirements: None.
MULTIPLY - Static variable in class nxopen.mechatronics.GanttOperationParameterBuilder.OperatorOption
Multiply operator '*='
multiply(double[], double[]) - Method in interface nxopen.uf.UFMtx2
multiply(double[], double[]) - Method in interface nxopen.uf.UFMtx3
multiply(double[], double[]) - Method in interface nxopen.uf.UFMtx4
multiplyMatrices(double[], double[]) - Method in interface nxopen.uf.UFTrns
multiplyT(double[], double[]) - Method in interface nxopen.uf.UFMtx2
multiplyT(double[], double[]) - Method in interface nxopen.uf.UFMtx3
multiplyT(double[], double[]) - Method in interface nxopen.uf.UFMtx4
multiPort() - Method in interface nxopen.routing.ModelTerminalsBuilder
Returns the MultiPort of the selected object
License requirements: routing_harness ("Routing Harness")
.
multiPorts() - Method in interface nxopen.routing.RouteManager
MultiPort Collection .
multiPositionBuilder() - Method in interface nxopen.tooling.ElectrodeBlankBuilder
Returns the multi position builder.
MultiRamp - Interface in nxopen.cam
multiRamp() - Method in interface nxopen.cam.TurnCutParameters
Returns the multi ramp
License requirements: None.
MultiRamp.Types - Class in nxopen.cam
the multi ramp pattern types .
MultiSelectList - Interface in nxopen.uistyler
Represents a MultiSelectList for UI Styler .
MultiSelectList.Activate - Interface in nxopen.uistyler
MultiSelectList.DoubleClick - Interface in nxopen.uistyler
Called when a dialog user selects an entry with a single mouse click or presses the spacebar
on a selected item.
MultiTextBox - Interface in nxopen.uistyler
Represents a MultiTextBox for UI Styler.
multiTransitionLaw() - Method in interface nxopen.geometricutilities.LawBuilder
Returns the multi transition law.
MultiTransitionLawBuilder - Interface in nxopen.geometricutilities
Represents multiple transition law.
MUST_BE_B_SURFACE - Static variable in class nxopen.uf.UFConstants
MUST_BE_SINGLE_FACE - Static variable in class nxopen.uf.UFConstants
MUST_BE_UNTRIMMED_FACE - Static variable in class nxopen.uf.UFConstants
muStatic() - Method in interface nxopen.motion.JointFrictionAdams
muStatic() - Method in interface nxopen.motion.JointFrictionLms
Returns the mu static
License requirements: None.
muStatic() - Method in interface nxopen.motion.JointFrictionRecurDyn
muStaticExpression() - Method in interface nxopen.motion.JointFrictionAdams
Returns the mu static expression
License requirements: None.
muStaticExpression() - Method in interface nxopen.motion.JointFrictionRecurDyn
Returns the mu static expression
License requirements: None.
MW_COMPONENT_NAME - Static variable in class nxopen.tooling.AssemblyDrawingBuilder.AttributeNames
MW_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
MW_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
MW_SIDE - Static variable in class nxopen.tooling.AssemblyDrawingBuilder.AttributeNames
mwcopySheets() - Method in interface nxopen.tooling.ToolingManager
Returns the MWCopySheetsCollection instance belonging to this part .
MWCopySheetsBuilder - Interface in nxopen.tooling
MWCopySheetsBuilder.Types - Class in nxopen.tooling
This enum represents the type of sheets to be copied
MWCopySheetsCollection - Interface in nxopen.tooling
Represents a collection of MWCopySheets builder
To obtain an instance of this class, refer to
ToolingManager
Created in NX7.5.0
mwdefineRegions() - Method in interface nxopen.tooling.ToolingManager
Returns the MWDefineRegionsCollection instance belonging to this part .
MWDefineRegionsBuilder - Interface in nxopen.tooling
MWDefineRegionsBuilder.OrCreateEmptyRegionData - Class in nxopen.tooling
MWDefineRegionsBuilder.TranslucencyOptionType - Class in nxopen.tooling
This enum represents the translucency is to be performed on the selected or non-selected region faces
MWDefineRegionsCollection - Interface in nxopen.tooling
Represents a collection of MWDefineRegions builder
To obtain an instance of this class, refer to
ToolingManager
Created in NX6.0.0
mwdefineSheets() - Method in interface nxopen.tooling.ToolingManager
Returns the MWDefineSheetsCollection instance belonging to this part .
MWDefineSheetsBuilder - Interface in nxopen.tooling
MWDefineSheetsCollection - Interface in nxopen.tooling
Represents a collection of MWDefineSheets builder
To obtain an instance of this class, refer to
ToolingManager
Created in NX6.0.0
mwdesignGuideLines() - Method in interface nxopen.tooling.ToolingManager
Returns the MWDesignGuideLinesCollection instance belonging to this part .
MWDesignGuideLinesBuilder - Interface in nxopen.tooling
The builder for designing guide lines in Mold Wizard.
MWDesignGuideLinesBuilder.CreateGuideLineData - Class in nxopen.tooling
MWDesignGuideLinesBuilder.DirectionType - Class in nxopen.tooling
The type of direction for the guide line to be created.
MWDesignGuideLinesCollection - Interface in nxopen.tooling
Represents a collection of MWDesignGuideLines builder
To obtain an instance of this class, refer to
ToolingManager
Created in NX7.5.0
mwdesignPartingSurface() - Method in interface nxopen.tooling.ToolingManager
Returns the MWDesignPartingSurfaceCollection instance belonging to this part .
MWDesignPartingSurfaceBuilder - Interface in nxopen.tooling
The builder for designing parting surface in Mold Wizard.
MWDesignPartingSurfaceBuilder.ObjectType - Class in nxopen.tooling
The type of parting objects to be edited or placed.
MWDesignPartingSurfaceBuilder.PartingSurfaceType - Class in nxopen.tooling
The type of parting surface to be created.
MWDesignPartingSurfaceBuilder.TransitionSurfaceType - Class in nxopen.tooling
The type of transition surface to be created.
MWDesignPartingSurfaceBuilder.TrimAndExtendFromRegionType - Class in nxopen.tooling
The region type from which to trim and extend when creating parting surface.
MWDesignPartingSurfaceCollection - Interface in nxopen.tooling
Represents a collection of MWDesignPartingSurface builder
To obtain an instance of this class, refer to
ToolingManager
Created in NX7.5.0
MWLayoutCollection - Interface in nxopen.tooling
Creates Mold Wizard layout collection
To obtain an instance of this class, refer to
ToolingManager
Created in NX6.0.0
mwLayoutType() - Method in interface nxopen.tooling.LayoutBuilder
Returns the layout pattern type
License requirements: None.
mwmoldedPartValidation() - Method in interface nxopen.tooling.ToolingManager
Returns the MWMoldedPartValidationManager instance belonging to this part .
MWMoldedPartValidationBuilder - Interface in nxopen.tooling
Represents a builder to be used to perform Molded Part Validation analysis.
MWMoldedPartValidationBuilder.AssignToRegion - Class in nxopen.tooling
Options for assigning faces to the Cavity or Core region
MWMoldedPartValidationBuilder.CalculateOption - Class in nxopen.tooling
Calculation options
MWMoldedPartValidationBuilder.CheckScope - Class in nxopen.tooling
Check scope for information
MWMoldedPartValidationBuilder.RangeType - Class in nxopen.tooling
Range type for displaying small corner radius faces
MWMoldedPartValidationManager - Interface in nxopen.tooling
Represents a manager of the MWMoldedPartValidation builder
To obtain an instance of this class, refer to
ToolingManager
Created in NX8.0.0
mwpartingManager() - Method in interface nxopen.tooling.ToolingManager
Returns the MWPartingManagerCollection instance belonging to this part .
MWPartingManagerBuilder - Interface in nxopen.tooling
MWPartingManagerBuilder.DataStatus - Class in nxopen.tooling
The status of the parting manager data.
MWPartingManagerBuilder.RegisterType - Class in nxopen.tooling
The type of registering UNDO identifier.
MWPartingManagerCollection - Interface in nxopen.tooling
Represents a collection of MWPartingManager builder
To obtain an instance of this class, refer to
ToolingManager
Created in NX7.5.0
MWSearchRegionBuilder - Interface in nxopen.tooling
The Search Region builder is for defining a region by searching the region faces given a set of seed faces and boundary edges.
MWSearchRegionCollection - Interface in nxopen.tooling
Represents a collection of MWSearchRegion builder
To obtain an instance of this class, refer to
ToolingManager
Created in NX6.0.0
mwsearchRegions() - Method in interface nxopen.tooling.ToolingManager
Returns the MWSearchRegionCollection instance belonging to this part .
mwtraversePartingLines() - Method in interface nxopen.tooling.ToolingManager
Returns the MWTraversePartingLinesCollection instance belonging to this part .
MWTraversePartingLinesBuilder - Interface in nxopen.tooling
MWTraversePartingLinesCollection - Interface in nxopen.tooling
Represents a collection of the MWTraversePartingLines builder
To obtain an instance of this class, refer to
ToolingManager
Created in NX7.0.0
MWUpdate - Interface in nxopen
Update tools used in Mold Wizard for the Journamation layer .
MX - Static variable in class nxopen.cae.responsesimulation.DirectionDataComponent
MXDIR - Static variable in class nxopen.cam.InspectionAlignmentBuilder.AlignmentDirections
Align feature in the negitive X direction
MXDIR - Static variable in class nxopen.cam.InspectionAlignmentBuilder.RotationDirections
Rotate in the negitive X direction
MXXSHELL_RESULTANT - Static variable in class nxopen.cae.Result.Quantity
MXY - Static variable in class nxopen.cae.responsesimulation.DirectionDataComponent
MXYSHELL_RESULTANT - Static variable in class nxopen.cae.Result.Quantity
MXZ - Static variable in class nxopen.cae.responsesimulation.DirectionDataComponent
MY - Static variable in class nxopen.cae.responsesimulation.DirectionDataComponent
MYDIR - Static variable in class nxopen.cam.InspectionAlignmentBuilder.AlignmentDirections
Align feature in the negitive Y direction
MYDIR - Static variable in class nxopen.cam.InspectionAlignmentBuilder.RotationDirections
Rotate in the negitive Y direction
MYYSHELL_RESULTANT - Static variable in class nxopen.cae.Result.Quantity
MYZ - Static variable in class nxopen.cae.responsesimulation.DirectionDataComponent
MZ - Static variable in class nxopen.cae.responsesimulation.DirectionDataComponent
MZDIR - Static variable in class nxopen.cam.InspectionAlignmentBuilder.AlignmentDirections
Align feature in the negitive Z direction
MZDIR - Static variable in class nxopen.cam.InspectionAlignmentBuilder.RotationDirections
Rotate in the negitive Z direction
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z _