- X - Static variable in class nxopen.annotations.BaseFrameBarBuilder.AxisType
-
Ship X Axis
- X - Static variable in class nxopen.annotations.DatumTargetBuilder.TerminatorTypes
-
terminated with x
- x - Variable in class nxopen.cae.CorrelAlignmentBuilder.ReferencePt
-
- X - Static variable in class nxopen.cae.LaminateDynamicEventBuilder.ExcitationSelectedAxisEnum
-
- X - Static variable in class nxopen.cae.LaminateRandomEventBuilder.ExcitationAxisEnum
-
Deprecated.
- x() - Method in interface nxopen.cae.NodeCreateBuilder
-
Returns the x
License requirements: None.
- X - Static variable in class nxopen.cae.optimization.TBSTopologyLinkCondition.AxisType
-
Represents X axis
- X - Static variable in class nxopen.cae.Post.AxisymetricAxis
-
- X - Static variable in class nxopen.cae.Post.ClipPlane
-
- X - Static variable in class nxopen.cae.responsesimulation.DirectionDataComponent
-
- X - Static variable in class nxopen.cae.responsesimulation.Excitation.Component
-
- X - Static variable in class nxopen.cae.responsesimulation.TranslationalNodalFunctionExcitationBuilder.RotationAxisType
-
- X - Static variable in class nxopen.cae.Result.Component
-
- X - Static variable in class nxopen.cae.xyplot.DecimalFormat
-
Displays one digit followed by period
- x() - Method in interface nxopen.cam.InspectionMeasurePointBuilder
-
Returns the X at measured point
License requirements: None.
- X - Static variable in class nxopen.cam.RotaryPolarMoveBuilder.LockAxisDirection
-
X-Axis
- X - Static variable in class nxopen.display.DynamicSectionTypes.Axis
-
X axis
- X - Static variable in class nxopen.features.DatumAxisBuilder.FixedType
-
Fixed datum axis thru X Axis
- X - Static variable in class nxopen.features.EdgeSymmetryBuilder.MovementDirections
-
Along XC direction
- X - Static variable in class nxopen.features.MatchEdgeBuilder.PoleMoveDirection
-
Along XC direction
- X - Static variable in class nxopen.features.NSidedSurfaceBuilder.CenterControlAxisType
-
x axis
- X - Static variable in class nxopen.features.PolylineBuilder.WCSOptionType
-
Along X axis
- X - Static variable in class nxopen.features.shipdesign.SectionViewBuilder.PlaneTypes
-
- X - Static variable in class nxopen.features.StudioSplineBuilderEx.WCSOptionType
-
Along X axis
- X - Static variable in class nxopen.features.StudioXformBuilderEx.PrincipalMovementDirectionType
-
Translate in X direction
- X - Static variable in class nxopen.features.StudioXformBuilderEx.PrincipalRotatingAxisType
-
Rotate in X direction
- X - Static variable in class nxopen.features.StudioXformBuilderEx.PrincipalScalingDirectionType
-
Scale in X direction
- X - Static variable in class nxopen.features.subdivision.TransformCageData.WCSOptionType
-
Along X axis
- X - Static variable in class nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder.XyzTypes
-
x-axis plane
- X - Static variable in class nxopen.geometricanalysis.DeviationGaugeBuilder.XyzDirectionType
-
X direction
- X - Static variable in class nxopen.geometricanalysis.SurfaceIntersectionBuilder.XyzTypes
-
x-axis plane
- X - Static variable in class nxopen.geometricutilities.CurveShapingBuilder.WCSOptionType
-
Along X axis
- X - Static variable in class nxopen.geometricutilities.MovePoleBuilder.WCSDirectionType
-
- X - Static variable in class nxopen.geometricutilities.OrientXpressBuilder.Axis
-
Active axis in x-axis direction
- X - Static variable in class nxopen.geometricutilities.PointSetAlignmentBuilder.ConstraintOptions
-
X axis
- X - Static variable in class nxopen.motion.GraphBuilder.ComponentChoices
-
X
- X - Static variable in class nxopen.motion.MotionSensorBuilder.Component
-
x component
- x - Variable in class nxopen.Point2d
-
- x - Variable in class nxopen.Point3d
-
- x - Variable in class nxopen.Point4d
-
- x() - Method in interface nxopen.sim.KinematicChain
-
Returns the X axis of the kinematic chain
License requirements: None.
- X - Static variable in class nxopen.tooling.IntermediateStageBuilder.Orientations
-
orientation X
- X - Static variable in class nxopen.uf.UFDisp.PolyMarker
-
- x - Variable in class nxopen.uf.UFUi.GetDa1CoordsData
-
- x - Variable in class nxopen.uf.UFUi.GetDa2CoordsData
-
- X - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- x - Variable in class nxopen.Vector3d
-
- XACCELERATION - Static variable in class nxopen.cae.Result.Quantity
-
- XAND_YDIRECTIONS - Static variable in class nxopen.features.shipdesign.ShellTemplateBuilder.MarkingTypes
-
Draw X and Y direction template marking lines on plate.
- XANGULAR_ACCELERATION - Static variable in class nxopen.cae.Result.Quantity
-
- XANGULAR_VELOCITY - Static variable in class nxopen.cae.Result.Quantity
-
- xaxis() - Method in interface nxopen.blockstyler.SpecifyOrientation
-
Returns the XAxis
License requirements: None.
- xaxis() - Method in interface nxopen.cam.AlongMachineAxisMoveBuilder
-
Returns the X position
License requirements: None.
- xaxis() - Method in interface nxopen.cam.AlongMcsAxisMoveBuilder
-
Returns the delta x
License requirements: None.
- XAXIS - Static variable in class nxopen.cam.InspectionAlignmentBuilder.RotationAxisOptions
-
Rotate about X axis
- XAXIS - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.ParamXYZAxis
-
X Axis
- xAxis - Variable in class nxopen.facet.FacetedEdge.CurveData
-
- xaxis() - Method in interface nxopen.features.vehicledesign.VehicleCoordinateSystemBuilder
-
Returns the front to rear vector.
- xaxis() - Method in interface nxopen.geometricanalysis.sectionanalysis.SectionPlaneBuilder
-
Returns the plane X axis
License requirements: None.
- xaxis() - Method in interface nxopen.geometricutilities.AnchorLocatorBuilder
-
Returns the x-axis of the plane
License requirements: None.
- XAXIS - Static variable in class nxopen.uf.UFCurve.PrincipalAxis
-
- xAxis - Variable in class nxopen.uf.UFEval.Arc
-
- xAxis - Variable in class nxopen.uf.UFEval.Ellipse
-
- xAxis - Variable in class nxopen.uf.UFEval.Hyperbola
-
- xAxis - Variable in class nxopen.uf.UFEval.Parabola
-
- xAxis - Variable in class nxopen.uf.UFModlFeatures.AskRectangularPatternFaceData
-
- XAXIS - Static variable in class nxopen.uf.UFPath.Axis
-
- XAXIS - Static variable in class nxopen.WCS.Axis
-
- xaxisEdge() - Method in interface nxopen.features.sheetmetal.FlatPatternBuilder
-
Returns the x axis edge selection.
- xaxisEdge() - Method in interface nxopen.features.sheetmetal.FlatSolidBuilder
-
Returns the x axis edge selection
License requirements: None.
- xaxisOption() - Method in interface nxopen.cae.PostGraphAlongPathBuilder
-
Returns the option for defining the x axis of the graph.
- xaxisType() - Method in interface nxopen.motion.GraphBuilder
-
Returns the x axis type
License requirements: mechanisms ("MECHANISMS")
.
- XC - Static variable in class nxopen.cae.CorrelFineTuneAlignmentBuilder.AngleVector
-
- XC - Static variable in class nxopen.cae.CorrelFineTuneAlignmentBuilder.DistanceVector
-
- XC - Static variable in class nxopen.features.FitCurveBuilder.ProjectionDirectionOptions
-
WCS X axis
- XC - Static variable in class nxopen.features.SectionInertiaAnalysisBuilder.SectionAxisNormal
-
Along X Axis
- XC - Static variable in class nxopen.features.StudioXformBuilder.RotationDirectionType
-
Deprecated.
Rotate in X direction
- XC - Static variable in class nxopen.features.StudioXformBuilder.ScalingDirectionType
-
Deprecated.
Scale in X direction
- XC - Static variable in class nxopen.features.StudioXformBuilder.TranslationDirectionType
-
Deprecated.
Translate in X direction
- XC - Static variable in class nxopen.geometricanalysis.sectionanalysis.RadialBuilder.RotationAxisType
-
XC axis
- XC - Static variable in class nxopen.geometricanalysis.sectionanalysis.SectionPlaneBuilder.PlaneType
-
XC plane
- XC - Static variable in class nxopen.weld.WeldFillBuilder.WidthAlongType
-
The length is aligned along the current WCS X direction.
- XC_AXIS - Static variable in class nxopen.features.DatumAxisBuilder.Types
-
Datum axis thru X axis
- XC_AXIS - Static variable in class nxopen.features.subdivision.SubdivisionProjectCageBuilder.TargetTypes
-
- XC_YC - Static variable in class nxopen.features.GeneralConicBuilder.DrawingPlaneOptions
-
Use XC-YC plane
- XC_YC - Static variable in class nxopen.features.StudioXformBuilder.PlanarizePlaneOptionType
-
Deprecated.
On X-Y plane when planarize
- XC_YC - Static variable in class nxopen.features.StudioXformBuilder.ScalingDirectionType
-
Deprecated.
Scale on X-Y plane
- XC_YC - Static variable in class nxopen.features.StudioXformBuilder.TranslationDirectionType
-
Deprecated.
Translate on X-Y plane
- XC_YC_PLANE - Static variable in class nxopen.features.subdivision.SubdivisionProjectCageBuilder.TargetTypes
-
- XC_ZC - Static variable in class nxopen.features.StudioXformBuilder.PlanarizePlaneOptionType
-
Deprecated.
On X-Z plane when planarize
- XC_ZC - Static variable in class nxopen.features.StudioXformBuilder.ScalingDirectionType
-
Deprecated.
Scale on X-Z plane
- XC_ZC - Static variable in class nxopen.features.StudioXformBuilder.TranslationDirectionType
-
Deprecated.
Translate on X-Z plane
- XC_ZC_PLANE - Static variable in class nxopen.features.subdivision.SubdivisionProjectCageBuilder.TargetTypes
-
- xcGridSize - Variable in class nxopen.preferences.WorkPlane.NonuniformGridSize
-
XC axis grid parameters
- xcMapping() - Method in interface nxopen.cam.TurnOrientWcs
-
Returns the XC mapping
License requirements: None.
- XCOMPONENT - Static variable in class nxopen.uf.UFMotion.VectorComponent
-
- xconstant() - Method in interface nxopen.motion.VObject
-
- xcoordinate() - Method in interface nxopen.drafting.MoveToDrawingViewBuilder
-
Returns the x coordinate to calculate the new created drawing view's reference point
License requirements: None.
- xcoordinate() - Method in interface nxopen.weld.DatumSurfaceBuilder
-
Returns the x coordinate position for the surface datum location.
- xCoordinatePoints - Variable in class nxopen.cae.ftk.ArrayRecord2D.ComplexData
-
X-Coordinate data
- xCoordinatePoints - Variable in class nxopen.cae.ftk.ArrayRecord2D.RealData
-
X-Coordinate data
- xcoordinatepoints - Variable in class nxopen.cae.ftk.ComplexSectionBasedMatrixRecord.SectionData
-
X-Coordinate data
- xcoordinatepoints - Variable in class nxopen.cae.ftk.RealSectionBasedMatrixRecord.SectionData
-
X-Coordinate data
- xcoordinateUnit() - Method in interface nxopen.cae.ftk.SectionBasedMatrixRecord
-
Returns the X-Coordinate unit
License requirements: None.
- xcount() - Method in interface nxopen.die.PressureSystemParentBuilder
-
Returns the x count of pressure systems.
- xcount() - Method in interface nxopen.features.PatternFaceBuilder
-
Returns the count of rectangular pattern along X direction, don't use it until nx502
License requirements: None.
- xcount() - Method in interface nxopen.features.shipdesign.PlatePreparationBuilder
-
Returns the expression containing the attached part count in x direction.
- xcurve() - Method in interface nxopen.motion.GraphBuilder
-
Returns the x curve
License requirements: mechanisms ("MECHANISMS")
.
- XCYCPLANE - Static variable in class nxopen.features.shipdesign.InverseBendingLinesBuilder.ReferencePlaneType
-
XC-YC plane.
- xdatumFilter() - Method in interface nxopen.features.shipdesign.ShipSectionBuilder
-
Returns the x datum filter
License requirements: None.
- xdimension() - Method in interface nxopen.CGMBuilder
-
Returns the x dimension to be used when Dimension has been selected from the Size option.
- xdimension() - Method in interface nxopen.PrintPDFBuilder
-
Returns the x dimension to be used when Dimension has been selected from the Size option.
- xDir - Variable in class nxopen.uf.UFSf.OrientationData
-
- xDirection - Variable in class nxopen.Conic.OrientationData
-
- xDirection - Variable in class nxopen.CoordinateSystem.DirectionsData
-
- xdirection - Variable in class nxopen.drawings.FlatPatternObject.DirectionsData
-
X direction of simulated CSYS
- xdirection() - Method in interface nxopen.drawings.OvtBuilder
-
Returns the x direction vector for the view to be created or edited
License requirements: drafting ("DRAFTING")
.
- xdirection() - Method in interface nxopen.drawings.ProjectedViewOrientationBuilder
-
Returns the x direction vector for the orthographic projected view settings to be edited
License requirements: None.
- xdirection() - Method in interface nxopen.drawings.SvtBuilder
-
Returns the x direction vector for the view to be created or edited.
- xdirection() - Method in interface nxopen.features.shipdesign.ShipCoordinatesBuilder
-
Returns the X-frame direction.
- xdirection() - Method in interface nxopen.geometricutilities.RectangularPattern
-
Returns the x axis
License requirements: None.
- XDIRECTION_ONLY - Static variable in class nxopen.features.shipdesign.ShellTemplateBuilder.MarkingTypes
-
Draw X direction template marking lines on plate.
- xdirectionEdge() - Method in interface nxopen.features.shipdesign.PinJigBuilder
-
Returns the edge from the plates whose tangent should be used to define the x direction.
- xdirectionType() - Method in interface nxopen.features.shipdesign.PlatePreparationBuilder
-
Returns the option that determines how the X direction is created.
- XDISPLACEMENT - Static variable in class nxopen.cae.Result.Quantity
-
- xdisplay() - Method in interface nxopen.PlotBuilder
-
Returns the X coordinate of a banner.
- xdistance() - Method in interface nxopen.cae.ElementTranslateBuilder
-
Returns the x component of distance for translation in a cartesian coordinate system
License requirements: None.
- xdistance() - Method in interface nxopen.cae.NodeTranslateBuilder
-
Returns the x distance
License requirements: None.
- xdistance() - Method in interface nxopen.die.PressureSystemParentBuilder
-
Returns the x distance of pressure systems.
- xdistance() - Method in interface nxopen.die.RibParentBuilder
-
Returns the x distance of die ribs.
- xdistance() - Method in interface nxopen.features.PatternFaceBuilder
-
Returns the distance between rectangular pattern along X direction, don't use it until nx502
License requirements: None.
- xdistance() - Method in interface nxopen.features.shipdesign.ShipCoordinatesBuilder
-
Returns the distance along X-direction.
- xdistanceFirst() - Method in interface nxopen.tooling.DieBaseBuilder
-
Returns the first distance along X value.
- xdistanceSecond() - Method in interface nxopen.tooling.DieBaseBuilder
-
Returns the second distance along X value.
- XELEMENT_FORCE - Static variable in class nxopen.cae.Result.Quantity
-
- XESS_FILE_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- XESS_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- xexpression() - Method in interface nxopen.motion.BushingGeneralCoefficientsComponent
-
Returns the x expression, it is available only when
Motion.BushingGeneralCoefficientsComponent#setCoefficientsType
is set to Motion.ConnectorCoefficientTypes#CONSTANT
case
License requirements: None.
- xexpression() - Method in interface nxopen.motion.VObject
-
Returns the x component expression
License requirements: None.
- XEXX - Static variable in class nxopen.cae.xyplot.DecimalFormat
-
Scientific notation with one digit followed by period,
for example: 5.3E+05
- xflip() - Method in interface nxopen.geometricutilities.RectangularPattern
-
Returns the XSelection flip attribute.
- XFORM - Static variable in class nxopen.preferences.SessionModeling.SplineDefaultActionTypes
-
Specifies X-form for editing a spline
- xform - Variable in class nxopen.uf.UFGexp.AskLengthParmsData
-
- Xform - Interface in nxopen
-
- xform - Variable in class nxopen.XformCollection.CreateExtractXformData
-
Xform
- xform1 - Variable in class nxopen.uf.UFGexp.AskAngleParmsData
-
- xform1 - Variable in class nxopen.uf.UFGexp.AskDistanceParmsData
-
- xform2 - Variable in class nxopen.uf.UFGexp.AskAngleParmsData
-
- xform2 - Variable in class nxopen.uf.UFGexp.AskDistanceParmsData
-
- XformCollection - Interface in nxopen
-
Represents a collection of
Xform
objects.
- XformCollection.CreateExtractXformData - Class in nxopen
-
- XformData() - Constructor for class nxopen.HumanData.XformData
-
- xformExists - Variable in class nxopen.features.CompositeCurveBuilder.WaveLinkInformationData
-
true if there is a transform
- xformExists - Variable in class nxopen.features.DatumCsysBuilder.WaveLinkInformationData
-
true if there is a transform
- xformExists - Variable in class nxopen.features.ExtractFaceBuilder.WaveLinkInformationData
-
true if there is a transform
- xformExists - Variable in class nxopen.features.MirrorBodyBuilder.WaveLinkInformationData
-
true if there is a transform
- xformExists - Variable in class nxopen.features.WaveDatumBuilder.WaveLinkInformationData
-
true if there is a transform
- xformExists - Variable in class nxopen.features.WavePointBuilder.WaveLinkInformationData
-
true if there is a transform
- xformExists - Variable in class nxopen.features.WaveRoutingBuilder.WaveLinkInformationData
-
true if there is a transform
- xformExists - Variable in class nxopen.features.WaveSketchBuilder.WaveLinkInformationData
-
true if there is a transform
- xformIndex - Variable in class nxopen.uf.UFModl.LinkedExt
-
- xformObjects() - Method in interface nxopen.features.StudioXformBuilder
-
- xformObjects() - Method in interface nxopen.features.StudioXformBuilderEx
-
Returns the object to be transformed.
- xformOrientation - Variable in class nxopen.features.CompositeCurveBuilder.WaveLinkInformationData
-
transformation matrix
- xformOrientation - Variable in class nxopen.features.DatumCsysBuilder.WaveLinkInformationData
-
transformation matrix
- xformOrientation - Variable in class nxopen.features.ExtractFaceBuilder.WaveLinkInformationData
-
transformation matrix
- xformOrientation - Variable in class nxopen.features.MirrorBodyBuilder.WaveLinkInformationData
-
transformation matrix
- xformOrientation - Variable in class nxopen.features.WaveDatumBuilder.WaveLinkInformationData
-
transformation matrix
- xformOrientation - Variable in class nxopen.features.WavePointBuilder.WaveLinkInformationData
-
transformation matrix
- xformOrientation - Variable in class nxopen.features.WaveRoutingBuilder.WaveLinkInformationData
-
transformation matrix
- xformOrientation - Variable in class nxopen.features.WaveSketchBuilder.WaveLinkInformationData
-
transformation matrix
- xformOrigin - Variable in class nxopen.features.CompositeCurveBuilder.WaveLinkInformationData
-
transformation origin
- xformOrigin - Variable in class nxopen.features.DatumCsysBuilder.WaveLinkInformationData
-
transformation origin
- xformOrigin - Variable in class nxopen.features.ExtractFaceBuilder.WaveLinkInformationData
-
transformation origin
- xformOrigin - Variable in class nxopen.features.MirrorBodyBuilder.WaveLinkInformationData
-
transformation origin
- xformOrigin - Variable in class nxopen.features.WaveDatumBuilder.WaveLinkInformationData
-
transformation origin
- xformOrigin - Variable in class nxopen.features.WavePointBuilder.WaveLinkInformationData
-
transformation origin
- xformOrigin - Variable in class nxopen.features.WaveRoutingBuilder.WaveLinkInformationData
-
transformation origin
- xformOrigin - Variable in class nxopen.features.WaveSketchBuilder.WaveLinkInformationData
-
transformation origin
- xformOX() - Method in interface nxopen.features.StudioXformBuilderEx
-
Returns the orient express object
License requirements: None.
- xforms() - Method in interface nxopen.BasePart
-
Returns the XformCollection instance belonging to this part .
- xforms - Variable in class nxopen.uf.UFModl.LinkedExt
-
- xformScale - Variable in class nxopen.features.CompositeCurveBuilder.WaveLinkInformationData
-
transformation scale
- xformScale - Variable in class nxopen.features.DatumCsysBuilder.WaveLinkInformationData
-
transformation scale
- xformScale - Variable in class nxopen.features.ExtractFaceBuilder.WaveLinkInformationData
-
transformation scale
- xformScale - Variable in class nxopen.features.MirrorBodyBuilder.WaveLinkInformationData
-
transformation scale
- xformScale - Variable in class nxopen.features.WaveDatumBuilder.WaveLinkInformationData
-
transformation scale
- xformScale - Variable in class nxopen.features.WavePointBuilder.WaveLinkInformationData
-
transformation scale
- xformScale - Variable in class nxopen.features.WaveRoutingBuilder.WaveLinkInformationData
-
transformation scale
- xformScale - Variable in class nxopen.features.WaveSketchBuilder.WaveLinkInformationData
-
transformation scale
- xframeOption() - Method in interface nxopen.features.shipdesign.ShipCoordinatesBuilder
-
Returns the X-frame option.
- xfunction() - Method in interface nxopen.motion.BushingGeneralCoefficientsComponent
-
Returns the component x function tag, it is available only when
Motion.BushingGeneralCoefficientsComponent#setCoefficientsType
is set to Motion.ConnectorCoefficientTypes#SPLINE
case
License requirements: None.
- xfunction() - Method in interface nxopen.motion.VObject
-
Returns the x component function
License requirements: None.
- xhatchAdjToler - Variable in class nxopen.uf.UFDraw.SxviewPrfs
-
- xhatEid - Variable in class nxopen.uf.UFDrf.CreateXhatchData
-
- xIncrement - Variable in class nxopen.cae.AfuData.EvenData
-
Abscissa increment
- xIncrement - Variable in class nxopen.cae.ftk.ArrayRecord2DEven.EvenComplexData
-
Abscissa increment
- xIncrement - Variable in class nxopen.cae.ftk.ArrayRecord2DEven.EvenRealData
-
Abscissa increment
- xIncrement - Variable in class nxopen.cae.FunctionBuilder.MathPlotData
-
- XLABEL - Static variable in class nxopen.cae.xyplot.TextType
-
X Axis name label
- xlaw() - Method in interface nxopen.features.LawCurveBuilder
-
Returns the x law
License requirements: None.
- xLength - Variable in class nxopen.uf.UFDrf.StrokeInfo
-
- XM - Static variable in class nxopen.cam.fbm.FeatureGeometry.SequenceDirectionType
-
Direction: XM
- XM - Static variable in class nxopen.cam.PartAxisBuilder.PartAxisOfRotationTypes
-
+XM
- XM - Static variable in class nxopen.cam.ProbeInspectPointMoveBuilder.Direction
-
XM
- XM - Static variable in class nxopen.cam.RotaryFinishGeomBuilder.PartAxisOfRotationTypes
-
+XM
- XM - Static variable in class nxopen.cam.ToolPathTiltMachine.ToolMainMcsTypes
-
tool rotation MCS +XM
- XM_YM - Static variable in class nxopen.cam.TurnOrientGeomBuilder.LatheWorkPlaneTypes
-
XM/YM plane of the MCS
- XM_YM_ZM - Static variable in class nxopen.cam.LaserLinearMove.MoveTypes
-
XM -> YM -> ZM
- XM_ZM_YM - Static variable in class nxopen.cam.LaserLinearMove.MoveTypes
-
XM -> ZM -> YM
- xmass() - Method in interface nxopen.motion.NormalModeProperty
-
Returns the percent mass of X direction component
License requirements: mechanisms ("MECHANISMS")
.
- xmax() - Method in interface nxopen.features.shipdesign.MainDimensionsBuilder
-
Returns the expression containing the x max value.
- xmaxDatumFilter() - Method in interface nxopen.features.shipdesign.ShipSectionBuilder
-
Returns the x max datum filter
License requirements: None.
- xmaxOffset() - Method in interface nxopen.features.shipdesign.ShipSectionBuilder
-
Returns the x max offset
License requirements: None.
- xmin() - Method in interface nxopen.features.shipdesign.MainDimensionsBuilder
-
Returns the expression containing the x min value.
- xminDatumFilter() - Method in interface nxopen.features.shipdesign.ShipSectionBuilder
-
Returns the x min datum filter
License requirements: None.
- xMinimum - Variable in class nxopen.cae.AfuData.EvenData
-
Minimum abscissa data value
- xMinimum - Variable in class nxopen.cae.ftk.ArrayRecord2DEven.EvenComplexData
-
Minimum abscissa data value
- xMinimum - Variable in class nxopen.cae.ftk.ArrayRecord2DEven.EvenRealData
-
Minimum abscissa data value
- xMinimum - Variable in class nxopen.cae.FunctionBuilder.MathPlotData
-
- xminOffset() - Method in interface nxopen.features.shipdesign.ShipSectionBuilder
-
Returns the x min offset
License requirements: None.
- XML - Static variable in class nxopen.cae.SimConditionSeqMgr.FileFormat
-
- XML - Static variable in class nxopen.issue.IssueAttachment.Type
-
XML type
- XML - Static variable in class nxopen.routing.CompareRunsBuilder.CompareTypes
-
- XML - Static variable in class nxopen.Validation.InputType
-
Input rules are from XML file
- xmlComparator() - Method in interface nxopen.Session
-
Returns the
XmlComparator
instance belonging to this session
Created in NX6.0.2
- XmlComparator - Interface in nxopen.validate
-
Provides a generic comparator for finding differences between two XML
format files.
- XmlComparator.Options - Class in nxopen.validate
-
Represents config options in comparison
For example:
case 1: Defines filter file to control what nodes will be compared;
generates comparison report and log; ignores CDATA and processing
instruction nodes.
- XmlComparator.Result - Class in nxopen.validate
-
Specifies result of the comparison
- xmlpData - Variable in class nxopen.die.FlangeTaskBuilder.CameraLayerAndXmlpData
-
xmlp data
- xmlpData - Variable in class nxopen.die.PierceTaskBuilder.CameraLayerAndXmlpData
-
xmlp data
- xmlpData - Variable in class nxopen.die.TrimTaskBuilder.CameraLayerAndXmlpData
-
xmlp data
- xmountBuilder() - Method in interface nxopen.cam.TurningToolBuilder
-
Returns the x mount builder (inheritable double)
License requirements: cam_base ("CAM BASE")
.
- xn1 - Variable in class nxopen.mechatronics.CamProfileBuilder.Element
-
segment nomalize lower define range
- xn2 - Variable in class nxopen.mechatronics.CamProfileBuilder.Element
-
segment nomalize higher define range
- XNUMBER - Static variable in class nxopen.cae.xyplot.TextType
-
X Axis number label
- xoff - Variable in class nxopen.uf.UFCutter.TurnTrackingPointData
-
- xoff - Variable in class nxopen.uf.UFPath.TrackingPointChange
-
- xoffset() - Method in interface nxopen.cam.RotateToolMoveBuilder
-
Returns the X offset
License requirements: None.
- xoffset() - Method in interface nxopen.cam.ToolChangeCiBuilder
-
Returns the Tool Xoffset builder
License requirements: None.
- xoffset - Variable in class nxopen.cam.TrackingBuilder.Data
-
the xoffset
- xoffset() - Method in interface nxopen.die.HeelpostBuilder
-
Returns the offset applied in the X direction to determine the hole center
License requirements: None.
- xoffset() - Method in interface nxopen.die.PressureSystemParentBuilder
-
Returns the x offset of pressure systems.
- xoffset() - Method in interface nxopen.die.RibParentBuilder
-
Returns the x offset of die ribs.
- xoffset() - Method in interface nxopen.features.shipdesign.ShellTemplateBuilder
-
Returns the expression defining the value of the offset to apply in the X direction.
- xoffset() - Method in interface nxopen.PlotBuilder
-
Returns the X coordinate offset of a banner.
- xOffset - Variable in class nxopen.uf.UFModlFeatures.AskRectangularPatternFaceData
-
- xOffsetFactor - Variable in class nxopen.uf.UFDrf.AssociativeOrigin
-
- xoffsetToggle() - Method in interface nxopen.cam.RotateToolMoveBuilder
-
Returns the X offset Toggle Status
License requirements: None.
- xoffsetToggle() - Method in interface nxopen.cam.ToolChangeCiBuilder
-
Returns the Tool Xoffset toggle
License requirements: None.
- xoffsetValue - Variable in class nxopen.uf.UFPath.ToolChange
-
- XONLY - Static variable in class nxopen.features.ProjectCurveBuilder.ArcLengthType
-
Represents X only
- xonPathSpacing() - Method in interface nxopen.geometricutilities.AlongPathPattern
-
Returns the on path instance spacing along the x path
License requirements: None.
- XORTHO - Static variable in class nxopen.cae.CorrelShapemetrictype
-
Shape metric type is Cross Orthogonality
- XORTHO - Static variable in class nxopen.cae.ModelUpdateCorrelMethodBuilder.Method
-
Correlation Method is X_ORTHO
- xoutput() - Method in interface nxopen.cam.AlongMachineAxisMoveBuilder
-
Returns the X output
License requirements: None.
- xpath() - Method in interface nxopen.geometricutilities.AlongPathPattern
-
Returns the x path
License requirements: None.
- xpathOption() - Method in interface nxopen.geometricutilities.AlongPathPattern
-
Returns the x path options
License requirements: None.
- xplaneUserDefined() - Method in interface nxopen.features.shipdesign.ShellTemplateBuilder
-
Returns the value specifying that the plane for the X direction was user defined.
- XREACTION_FORCE - Static variable in class nxopen.cae.Result.Quantity
-
- XREACTION_MOMENT - Static variable in class nxopen.cae.Result.Quantity
-
- xref() - Method in interface nxopen.tooling.LayoutBuilder
-
Returns the layout cavity number in X-axis
License requirements: None.
- xrefValue() - Method in interface nxopen.tooling.ElectrodeBlankBuilder
-
Returns the X value of the blank origin in the current machine set coordinator.
- xresultComponent() - Method in interface nxopen.cae.PostGraphOrbitBuilder
-
Returns the component used as x axis for orbit plot
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- XROTATION - Static variable in class nxopen.cae.Result.Quantity
-
- xrotationDOFMode() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
Returns the x rotation dofmode
License requirements: None.
- xrotationLowerLimit() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
Returns the x rotation lower limit
License requirements: None.
- xrotationUpperLimit() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
Returns the x rotation upper limit
License requirements: None.
- xs() - Method in interface nxopen.UFSession
-
- xscaleFactor() - Method in interface nxopen.cae.NodeTranslateBuilder
-
Returns the x scale factor
License requirements: None.
- xselection() - Method in interface nxopen.geometricutilities.RectangularPattern
-
Returns the direction object.
- xshift() - Method in interface nxopen.tooling.BlankLayoutBuilder
-
Returns the value to shift the blank in the X direction.
- xSize - Variable in class nxopen.preferences.SessionVisualizationHighQualityImage.ImageSizeData
-
X Pixel size.
- xspacing() - Method in interface nxopen.geometricutilities.RectangularPattern
-
Returns the instance spacing along the x axis
License requirements: None.
- xsymmetryToggle() - Method in interface nxopen.geometricutilities.RectangularPattern
-
Returns the XSymmetry toggle attribute.
- xtDatumLetter() - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
Returns the xt datum letter
License requirements: None.
- xtDistance() - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
Returns the xt distance
License requirements: None.
- xtFeature() - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
Returns the xt feature
License requirements: None.
- xtFeatureSelect() - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
Returns the xt feature select
License requirements: None.
- xtMethod() - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
Returns the xt method
License requirements: None.
- xtranslationDOFMode() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
Returns the x translation dofmode
License requirements: None.
- xtranslationLowerLimit() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
Returns the x translation lower limit
License requirements: None.
- xtranslationUpperLimit() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
Returns the x translation upper limit
License requirements: None.
- xUnit - Variable in class nxopen.cae.AfuData.AbscissaAndOrdinateAxisDefinitionData
-
Unit Code of abscissa data
- xUnit - Variable in class nxopen.cae.AfuData.AxisDefinitionData
-
Unit Code of abscissa data
- xUnit - Variable in class nxopen.cae.ftk.OptionSetting.OptionData
-
Unit Code of AFU data
- xUnit - Variable in class nxopen.cae.ftk.OptionSetting.RecordOptionData
-
Unit Code of AFU data
- xUnit - Variable in class nxopen.cae.FunctionBuilder.UnitsData
-
- xval - Variable in class nxopen.uf.UFSim.AskInitJunctionXformData
-
- xval - Variable in class nxopen.uf.UFSim.AskJunctionXformData
-
- xval - Variable in class nxopen.uf.UFSim.AskToolOffsetsData
-
- xval - Variable in class nxopen.uf.UFSim.TransformOffsetAcsToMtcsData
-
- xvalue() - Method in interface nxopen.features.ToolingBoxBuilder
-
Returns the edge length in X direction for general box.
- xvalue() - Method in interface nxopen.motion.BushingGeneralCoefficientsComponent
-
- xvalue() - Method in interface nxopen.tooling.CreateBoxBuilder
-
Returns the edge length in X direction for general box.
- xValues - Variable in class nxopen.cae.AfuData.ComplexData
-
Abscissa element data values
- xValues - Variable in class nxopen.cae.AfuData.RealData
-
Abscissa element data values
- xValues - Variable in class nxopen.cae.AfuDataConvertor.FftFrequencyData
-
X values of the output data
- xValues - Variable in class nxopen.cae.AfuDataConvertor.FftTimeData
-
X values of the output data
- xVec(double[]) - Method in interface nxopen.uf.UFMtx2
-
- xVec(double[]) - Method in interface nxopen.uf.UFMtx3
-
- xVec(double[]) - Method in interface nxopen.uf.UFMtx4
-
- xvector() - Method in interface nxopen.features.PatternFaceBuilder
-
Returns the X direction of rectangular pattern, don't use it until nx502
License requirements: None.
- xVector - Variable in class nxopen.routing.OffsetPath.OffsetReferenceAxesData
-
X reference axes for the offset object
- xVector - Variable in class nxopen.uf.UFCurve.Proj
-
- xvectorForEqualArcLength() - Method in interface nxopen.features.ProjectCurveBuilder
-
Returns the x vector for equal arc length
License requirements: None.
- xVectorTag - Variable in class nxopen.uf.UFCurve.Proj1
-
- XWD - Static variable in class nxopen.uf.UFDisp.ImageFormat
-
- xwidth() - Method in interface nxopen.features.shipdesign.PlatePreparationBuilder
-
Returns the expression containing the width in x direction.
- XX - Static variable in class nxopen.cae.responsesimulation.DirectionDataComponent
-
- XX - Static variable in class nxopen.cae.Result.Component
-
- XX - Static variable in class nxopen.cae.xyplot.DecimalFormat
-
Displays two digits followed by period
- xx - Variable in class nxopen.Matrix3x3
-
- XXEXX - Static variable in class nxopen.cae.xyplot.DecimalFormat
-
Scientific notation with two digits followed by period
- XXSTRESS - Static variable in class nxopen.cae.Result.Quantity
-
- XXX - Static variable in class nxopen.cae.xyplot.DecimalFormat
-
Displays three digits followed by period
- XXXEXX - Static variable in class nxopen.cae.xyplot.DecimalFormat
-
Scientific notation with three digits followed by period
- XXXX - Static variable in class nxopen.cae.xyplot.DecimalFormat
-
Displays four digits followed by period
- XXXXEXX - Static variable in class nxopen.cae.xyplot.DecimalFormat
-
Scientific notation with four digits followed by period
- XXY_PLANE - Static variable in class nxopen.cae.BaseFemPart.AxisymAbstractionType
-
XY plane - X axis axisymmetric elements are allowed
- XY - Static variable in class nxopen.annotations.HoleTableSettingsFormatBuilder.ShowColumnsType
-
X and Y
- XY - Static variable in class nxopen.cae.responsesimulation.DirectionDataComponent
-
- XY - Static variable in class nxopen.cae.Result.Component
-
- XY - Static variable in class nxopen.cam.ProbeControlParametersBuilder.AdjustmentTypes
-
XY Calibration
- XY - Static variable in class nxopen.cam.RotaryPolarMoveBuilder.LockPlaneType
-
XY-Plane
- XY - Static variable in class nxopen.display.Stage.OrientationType
-
Use xy plane for the stage floor.
- XY - Static variable in class nxopen.features.DatumPlaneBuilder.FixedType
-
Fixed datum plane thru XY plane
- XY - Static variable in class nxopen.features.EdgeSymmetryBuilder.SymmetryPlaneOptions
-
Uses XC-YC plane as plane of symmetry
- XY - Static variable in class nxopen.features.PolylineBuilder.DrawingPlaneOptions
-
XY plane
- XY - Static variable in class nxopen.features.PolylineBuilder.WCSOptionType
-
In XY plane
- XY - Static variable in class nxopen.features.StudioSplineBuilderEx.DrawingPlaneOptions
-
XY plane
- XY - Static variable in class nxopen.features.StudioSplineBuilderEx.WCSOptionType
-
In XY plane
- XY - Static variable in class nxopen.features.StudioXformBuilderEx.PlanarizeProjectionPlaneType
-
On X-Y plane when planarize
- XY - Static variable in class nxopen.features.StudioXformBuilderEx.PrincipalMovementDirectionType
-
Translate on X-Y plane
- XY - Static variable in class nxopen.features.StudioXformBuilderEx.PrincipalScalingDirectionType
-
Scale on X-Y plane
- XY - Static variable in class nxopen.features.subdivision.TransformCageData.WCSOptionType
-
In XY plane
- XY - Static variable in class nxopen.features.TabNoteCfgBuilder.Refplane
-
0 : Xc-Yc plane
- XY - Static variable in class nxopen.geometricanalysis.HighlightLinesAnalysisBuilder.LightPlaneOptions
-
Uses XC-YC plane as light plane
- XY - Static variable in class nxopen.geometricutilities.CurveShapingBuilder.WCSOptionType
-
In XY plane
- XY - Static variable in class nxopen.geometricutilities.MovePoleBuilder.WCSDirectionType
-
- XY - Static variable in class nxopen.geometricutilities.OrientXpressBuilder.Plane
-
Active plane is parallel to xy-plane
- xy - Variable in class nxopen.Matrix3x3
-
- XY - Static variable in class nxopen.motion.GraphBuilder.ComponentChoices
-
XY
- XY - Static variable in class nxopen.sim.KinematicChain.CoordinatePlaneTypes
-
XY
- XY_OF_WCS - Static variable in class nxopen.annotations.PmiDefaultPlane
-
- XY_PLANE - Static variable in class nxopen.annotations.PlaneBuilder.PlaneMethodType
-
XY of the WCS
- XY_PLANE - Static variable in class nxopen.cae.BaseFemPart.AxisymAbstractionType
-
XY plane - Y axis axisymmetric elements are allowed
- XyFunctionDataType - Class in nxopen.cae
-
Defines the data type of a function in AFU file
- XyFunctionGeneralType - Class in nxopen.cae
-
Defines general purpose type of a function
- XyFunctionLoadType - Class in nxopen.cae
-
Defines load purpose type of a function
- XyFunctionMacroType - Class in nxopen.cae
-
Defines the application type of a function
- XyFunctionMaterialType - Class in nxopen.cae
-
Defines material purpose type of a function
- XyFunctionMeasure - Class in nxopen.cae
-
Defines measurement unit types
- XyFunctionMotionType - Class in nxopen.cae
-
Defines motion purpose type of a function
- XyFunctionResponseType - Class in nxopen.cae
-
Defines response purpose type of a function
- XyFunctionUnit - Class in nxopen.cae
-
Defines all units used by xy function
- xygraph(FieldVariable, double, double, int, FieldVariable[], double[]) - Method in interface nxopen.fields.Field
-
Creates displayed graphs of the Field's specified independent variable
versus all the Field's dependent variables
License requirements: None.
- xygraph(FieldVariable, double, double, int, FieldVariable[], double[], int, boolean) - Method in interface nxopen.fields.Field
-
Plots or overlays graphs of the Field's specified independent variable
versus all the Field's dependent variables
License requirements: None.
- xygraph(FieldVariable, double, double, int, FieldVariable[], double[], int, int, boolean) - Method in interface nxopen.fields.Field
-
Plots or overlays graphs of the Field's specified independent variable
versus all the Field's dependent variables
License requirements: None.
- xygraphAndReturnPlots(FieldVariable, double, double, int, FieldVariable[], double[], int, int, boolean) - Method in interface nxopen.fields.Field
-
Plots or overlays graphs of the Field's specified independent variable
versus all the Field's dependent variables; returns newly created plot object(s).
- xygraphScaleAndReturnPlots(FieldVariable, double, double, int, FieldVariable[], double[], int, int, boolean, double) - Method in interface nxopen.fields.Field
-
Plots or overlays graphs of the Field's specified independent variable
versus all the Field's scaled dependent variables; returns newly created plot object(s).
- xyGridStyle() - Method in interface nxopen.cae.xyplot.BaseGridLayoutStyleSetting
-
Returns the grid style of XY plane
License requirements: None.
- XYPLANE - Static variable in class nxopen.weld.WeldLabelBuilder.OrientationPlaneType
-
- XYPLANE - Static variable in class nxopen.weld.WeldPmiBuilder.OrientationPlaneType
-
- XYPLOT_DISP_TEMPLATE_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- XYPLOT_DISP_TEMPLATE_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- XYPlotManager - Interface in nxopen.cae.xyplot
-
- xyplotManager() - Method in interface nxopen.Session
-
Returns the
XYPlotManager
belonging to this session
Created in NX7.5.0
- XYSTRESS - Static variable in class nxopen.cae.Result.Quantity
-
- XYZ - Static variable in class nxopen.annotations.HoleTableSettingsFormatBuilder.ShowColumnsType
-
X, Y and Z
- XYZ - Static variable in class nxopen.cam.ProbeControlParametersBuilder.AdjustmentTypes
-
XY Calibration and Z
- XYZ - Static variable in class nxopen.features.StudioXformBuilderEx.PrincipalMovementDirectionType
-
Translate on X-Y-Z coordinates
- XYZ - Static variable in class nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder.ProjectionTypes
-
specify x,y,z plane
- xyz() - Method in interface nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder
-
Returns the xyz
License requirements: None.
- XYZ - Static variable in class nxopen.geometricanalysis.SurfaceIntersectionBuilder.ProjectionTypes
-
specify x,y,z plane
- XYZ - Static variable in class nxopen.routing.HealMethod
-
- xyz - Variable in class nxopen.uf.UFScop.VectorData
-
- XYZ_DIRECTION - Static variable in class nxopen.geometricanalysis.DeviationGaugeBuilder.MeasurementMethodType
-
XYZ direction
- xyzDirection() - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder
-
Returns the xyz direction
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- XYZPLANE - Static variable in class nxopen.geometricanalysis.sectionanalysis.SectionAnalysisExBuilder.AlignmentType
-
The cutting planes are perpendicular to X, Y or Z plane
- xyzplane() - Method in interface nxopen.geometricanalysis.sectionanalysis.SectionAnalysisExBuilder
-
Returns the XYZ Planes section specification.
- XYZPlaneBuilder - Interface in nxopen.geometricanalysis.sectionanalysis
-
Represents the XYZ Plane specification for a GeometricAnalysis.SectionAnalysis.SectionAnalysisExBuilder
.
- XZ - Static variable in class nxopen.cae.responsesimulation.DirectionDataComponent
-
- XZ - Static variable in class nxopen.display.Stage.OrientationType
-
Use xz plane for the stage floor.
- XZ - Static variable in class nxopen.features.EdgeSymmetryBuilder.SymmetryPlaneOptions
-
Uses XC-ZC plane as plane of symmetry
- XZ - Static variable in class nxopen.features.PolylineBuilder.DrawingPlaneOptions
-
XZ plane
- XZ - Static variable in class nxopen.features.PolylineBuilder.WCSOptionType
-
In XZ plane
- XZ - Static variable in class nxopen.features.StudioSplineBuilderEx.DrawingPlaneOptions
-
XZ plane
- XZ - Static variable in class nxopen.features.StudioSplineBuilderEx.WCSOptionType
-
In XZ plane
- XZ - Static variable in class nxopen.features.StudioXformBuilderEx.PlanarizeProjectionPlaneType
-
On X-Z plane when planarize
- XZ - Static variable in class nxopen.features.StudioXformBuilderEx.PrincipalMovementDirectionType
-
Translate on X-Z plane
- XZ - Static variable in class nxopen.features.StudioXformBuilderEx.PrincipalScalingDirectionType
-
Scale on X-Z plane
- XZ - Static variable in class nxopen.features.subdivision.TransformCageData.WCSOptionType
-
In XZ plane
- XZ - Static variable in class nxopen.geometricutilities.CurveShapingBuilder.WCSOptionType
-
In XZ plane
- XZ - Static variable in class nxopen.geometricutilities.MovePoleBuilder.WCSDirectionType
-
- XZ - Static variable in class nxopen.geometricutilities.OrientXpressBuilder.Plane
-
Active plane is parallel to xz-plane
- xz - Variable in class nxopen.Matrix3x3
-
- XZ_OF_WCS - Static variable in class nxopen.annotations.PmiDefaultPlane
-
- XZ_PLANE - Static variable in class nxopen.annotations.PlaneBuilder.PlaneMethodType
-
XZ of the WCS
- XZPLANE - Static variable in class nxopen.weld.WeldLabelBuilder.OrientationPlaneType
-
- XZPLANE - Static variable in class nxopen.weld.WeldPmiBuilder.OrientationPlaneType
-
- XZY - Static variable in class nxopen.routing.HealMethod
-