A-Index (NXOpen Java API Reference)

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z _

A

A - Static variable in class nxopen.annotations.CuttingPlaneSymbolBuilder.ViewNameFormatOption: View Name is in the 'Section Prefix A' format, Where Section Prefix is taken from PMI Preferences and A is the Text of the PMI Cutting Plane Symbol.
A - Static variable in class nxopen.annotations.LineWeldDataBuilder.WeldSizeCodeType
A - Static variable in class nxopen.annotations.SizeLetterCode: Specifies size letter code "a"
A - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.ParamPriDatum: A
A - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.ParamSecDatum: A
A - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.ParamTerDatum: A
A - Static variable in class nxopen.cam.TurnToolBuilder.HolderStyles: A-Style
A - Static variable in class nxopen.drawings.LetterFormatTypes
A - Static variable in class nxopen.tooling.AssemblyDrawingBuilder.AttributeValues
a0 - Variable in class nxopen.mechatronics.CamProfileBuilder.Element: segment polynomial coefficient
a1() - Method in interface nxopen.annotations.DraftingSurfaceFinishBuilder: Returns the a1
License requirements: None.
a1() - Method in interface nxopen.annotations.SurfaceFinishBuilder: Returns the a1
License requirements: None.
a1 - Variable in class nxopen.mechatronics.CamProfileBuilder.Element: segment polynomial coefficient
a18 - Variable in class nxopen.HumanPosturePredictionBuilder.HandDataSaeData: the steering wheel outside diameter W9 expression
a2() - Method in interface nxopen.annotations.DraftingSurfaceFinishBuilder: Returns the a2
License requirements: None.
a2() - Method in interface nxopen.annotations.SurfaceFinishBuilder: Returns the a2
License requirements: None.
a2 - Variable in class nxopen.mechatronics.CamProfileBuilder.Element: segment polynomial coefficient
A2 - Static variable in class nxopen.PrintBuilder.PaperSize: A2 sheet, 420 x 594-millimeters
A3 - Static variable in class nxopen.cam.TurnToolBuilder.ReliefAngleTypes: Relief angle type: A (3)
a3 - Variable in class nxopen.mechatronics.CamProfileBuilder.Element: segment polynomial coefficient
A3 - Static variable in class nxopen.PrintBuilder.PaperSize: A3 sheet, 297- by 420-millimeters
A3EXTRA - Static variable in class nxopen.PrintBuilder.PaperSize: A3 Extra 322 x 445-millimeters
A3EXTRA_TRANSVERSE - Static variable in class nxopen.PrintBuilder.PaperSize: A3 Extra Transverse 322 x 445-millimeters
A3ROTATED - Static variable in class nxopen.PrintBuilder.PaperSize: A3 rotated sheet, 420- by 297-millimeters: Windows 98/Me, Windows NT 4.0 and later
A3TRANSVERSE - Static variable in class nxopen.PrintBuilder.PaperSize: A3 Transverse 297 x 420-millimeters
a4 - Variable in class nxopen.mechatronics.CamProfileBuilder.Element: segment polynomial coefficient
A4 - Static variable in class nxopen.PrintBuilder.PaperSize: A4 sheet, 210- by 297-millimeters
A4EXTRA - Static variable in class nxopen.PrintBuilder.PaperSize: A4 sheet, 9.27 x 12.69 inches
A4PLUS - Static variable in class nxopen.PrintBuilder.PaperSize: A4 Plus 210 x 330-millimeters
A4ROTATED - Static variable in class nxopen.PrintBuilder.PaperSize: A4 rotated sheet, 297- by 210-millimeters: Windows 98/Me, Windows NT 4.0 and later
A4SMALL - Static variable in class nxopen.PrintBuilder.PaperSize: A4 small sheet, 210- by 297-millimeters
A4TRANSVERSE - Static variable in class nxopen.PrintBuilder.PaperSize: A4 Transverse 210 x 297 millimeters
a5 - Variable in class nxopen.mechatronics.CamProfileBuilder.Element: segment polynomial coefficient
A5 - Static variable in class nxopen.PrintBuilder.PaperSize: A5 sheet, 148- by 210-millimeters
A5EXTRA - Static variable in class nxopen.PrintBuilder.PaperSize: A5 Extra 174 x 235-millimeters
A5ROTATED - Static variable in class nxopen.PrintBuilder.PaperSize: A5 rotated sheet, 210- by 148-millimeters: Windows 98/Me, Windows NT 4.0 and later
A5TRANSVERSE - Static variable in class nxopen.PrintBuilder.PaperSize: A5 Transverse 148 x 210-millimeters
a6 - Variable in class nxopen.mechatronics.CamProfileBuilder.Element: segment polynomial coefficient
A6 - Static variable in class nxopen.PrintBuilder.PaperSize: A6 sheet, 105- by 148-millimeters: Windows 98/Me, Windows NT 4.0 and later
A6ROTATED - Static variable in class nxopen.PrintBuilder.PaperSize: A6 rotated sheet, 148- by 105-millimeters: Windows 98/Me, Windows NT 4.0 and later
AA - Static variable in class nxopen.annotations.CuttingPlaneSymbolBuilder.ViewNameFormatOption: View Name is in the 'Section Prefix A-A' format, Where Where Section Prefix is taken from PMI Preferences and A is the Text of the PMI Cutting Plane Symbol.
AA - Static variable in class nxopen.cae.responsesimulation.RSEventSolverParameters.DdamCoefficientType
AA - Static variable in class nxopen.drawings.LetterFormatTypes
AA1 - Static variable in class nxopen.drawings.LetterFormatTypes
aasamplesEnum() - Method in interface nxopen.display.StudioImageCaptureBuilder: Returns the antialiasing samples enum
License requirements: None.
aaxis() - Method in interface nxopen.cam.AlongMachineAxisMoveBuilder: Returns the A position
License requirements: None.
AAXIS - Static variable in class nxopen.uf.UFPath.Axis
AB - Static variable in class nxopen.cae.responsesimulation.RSEventSolverParameters.DdamCoefficientType
ABAQUS - Static variable in class nxopen.cae.Result.Filetype
ABAQUS_ODB - Static variable in class nxopen.cae.Result.Filetype
ABBREVIATE - Static variable in class nxopen.annotations.TableCellStyleBuilder.FitMethodType
abbreviation() - Method in interface nxopen.Unit: Returns the abbreviation for a unit
License requirements: None.
abcissa - Variable in class nxopen.cae.Post.GraphParameters
ABDOMINAL_DEPTH - Static variable in class nxopen.HumanData.AdvancedScalingType: Indicate scaling of abdominal depth
ABEND - Static variable in class nxopen.tooling.BendInsertDesignBuilder.BendTypeOption: angle bend
ABORT - Static variable in class nxopen.cae.PostGraphBuilder.EvalutionErrors
ABORT - Static variable in class nxopen.cae.PostGraphBuilder.IncompatibleResult
ABORT - Static variable in class nxopen.cae.ResultsCombinationBuilder.EvaluationError
ABORT - Static variable in class nxopen.cae.ResultsCombinationBuilder.IncompatibleResults
ABORT - Static variable in class nxopen.cae.ResultsEnvelopeBuilder.IncompatibleResults
ABORT - Static variable in class nxopen.cae.ResultsReductionBuilder.EvaluationError
ABORT - Static variable in class nxopen.cae.ResultsReductionBuilder.IncompatibleResults
ABORT - Static variable in class nxopen.cae.TransientResultsReductionBuilder.EvaluationError
ABORT - Static variable in class nxopen.cae.TransientResultsReductionBuilder.IncompatibleResults
abort() - Method in interface nxopen.UFSession
ABORTED_BY_USER - Static variable in class nxopen.assemblies.ClearanceSet.JobStatus
ABORTED_ON_ERROR - Static variable in class nxopen.assemblies.ClearanceSet.JobStatus
abortOnFailure() - Method in interface nxopen.LoadOptions: Returns the option that specifies what action the system should take if it can't find a component part file
License requirements: None.
ABOUT_OBJECT_CENTER - Static variable in class nxopen.features.StudioXformBuilder.RotatingPivotType: Deprecated.

Rotate pivot at the object center
ABOUT_OBJECT_CENTER - Static variable in class nxopen.features.StudioXformBuilder.ScalingCenterType: Deprecated.

Scale center at the object center
ABOUT_POINT - Static variable in class nxopen.features.StudioXformBuilder.RotatingPivotType: Deprecated.

Rotate pivot at a point
ABOUT_POINT - Static variable in class nxopen.features.StudioXformBuilder.ScalingCenterType: Deprecated.

Scale center at a point
ABOUT_SELECTED_OBJECT - Static variable in class nxopen.features.StudioXformBuilder.RotatingPivotType: Deprecated.

Rotate pivot at the selected object
ABOUT_SELECTED_OBJECT - Static variable in class nxopen.features.StudioXformBuilder.ScalingCenterType: Deprecated.

Scale center at the selected object
ABOVE - Static variable in class nxopen.annotations.DiameterRadiusSymbolPlacement: Specifies diameter/radius symbol is placed above dimension text
ABOVE - Static variable in class nxopen.annotations.DualDimensionPlacement: Specifies dual dimension above primary dimension
ABOVE - Static variable in class nxopen.annotations.StackAlignmentPosition
ABOVE - Static variable in class nxopen.annotations.TableSectionStyleBuilder.DisplayContinuationNoteType: Above
ABOVE - Static variable in class nxopen.annotations.TableSectionStyleBuilder.LocationOfHeader: Above
ABOVE - Static variable in class nxopen.annotations.TolerancePlacement: Specifies tolerance above dimension text
ABOVE - Static variable in class nxopen.assemblies.PlaneSearchTerm.PlaneOverlapLogicType: Include objects residing above the plane defined by this search term
ABOVE - Static variable in class nxopen.drawings.LabelPositionTypes
ABOVE - Static variable in class nxopen.drawings.ScalePositionTypes
ABOVE - Static variable in class nxopen.features.EmbossRegion.ConvexityOption: Indicates the emboss geometry is above the target("Pad").
ABOVE - Static variable in class nxopen.features.shipdesign.ShipCoordinatesBuilder.ZDirectionType
ABOVE - Static variable in class nxopen.uf.UFGdt.TextLocation
ABOVE_BINDER - Static variable in class nxopen.tooling.LsdynaGeometryPreparationBuilder.BlankPosition: Blank sheet body is above binder.
ABOVE_BINDERAND_PUNCH - Static variable in class nxopen.tooling.LsdynaGeometryPreparationBuilder.BlankPosition: Blank sheet body is above binder and punch.
ABOVE_OR_INTERSECTS - Static variable in class nxopen.assemblies.PlaneSearchTerm.PlaneOverlapLogicType: Include objects residing above or intersecting the plane defined by this search term
ABOVE_STUB - Static variable in class nxopen.annotations.NarrowDisplayOption: Displays narrow dimension above stub
ABOVE_STUB - Static variable in class nxopen.annotations.TextPosition: Specifies text position above stub
ABOVE_STUB - Static variable in class nxopen.drawings.ViewDetailLabelBuilder.LabelParentTextPlacement
aboveText() - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder: Returns the above text
License requirements: None.
aboveTextType() - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder: Returns the above text enum
License requirements: None.
ABS - Static variable in class nxopen.cae.responsesimulation.CombinationEvaluationOptions.EvaluationMethod
ABS - Static variable in class nxopen.cae.responsesimulation.CombinationEvaluationOptions.MultipleExcitationCombinationMethod
abs() - Method in interface nxopen.cae.ResultVariable: Returns the Absolute value from result
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
AbscissaAndOrdinateAxisDefinitionData() - Constructor for class nxopen.cae.AfuData.AbscissaAndOrdinateAxisDefinitionData
abscissaType - Variable in class nxopen.cae.AfuData.AbscissaAndOrdinateAxisDefinitionData: Abscissa specific data type
abscissaType - Variable in class nxopen.cae.AfuData.AxisDefinitionData: Abscissa specific data type
abscissaType - Variable in class nxopen.cae.ftk.OptionSetting.OptionData: Abscissa specific data type
abscissaType - Variable in class nxopen.cae.ftk.OptionSetting.RecordOptionData: Abscissa specific data type
absCursorPos - Variable in class nxopen.uf.UFUi.AskSelCursorPosData
ABSOLUTE - Static variable in class nxopen.assemblies.CreateNewComponentBuilder.ComponentOriginType: Set the origin type to absolute
ABSOLUTE - Static variable in class nxopen.cae.BoltBuilder.SpiderDiameter: Specifies spider diameter in absolute terms
ABSOLUTE - Static variable in class nxopen.cae.CfdContactPreventionConstraintBuilder.Sizing
ABSOLUTE - Static variable in class nxopen.cae.CfdLocalResolutionConstraintBuilder.Sizing
ABSOLUTE - Static variable in class nxopen.cae.CircularImprintBuilder.AroundEdgeDiaType: Absolute Diameter Value
ABSOLUTE - Static variable in class nxopen.cae.LaminateDynamicEventBuilder.ReferenceTypeEnum
ABSOLUTE - Static variable in class nxopen.cae.LaminateRandomEventBuilder.ReferenceEnum: Deprecated.
ABSOLUTE - Static variable in class nxopen.cae.optimization.TBSConstraintBuilder.MagnitudeType: Constraints could be given in absolute values
ABSOLUTE - Static variable in class nxopen.cae.optimization.TBSTopologyControllerOptimizationParameters.VolumeDefinitionMethod: Specifying the absolute volume
ABSOLUTE - Static variable in class nxopen.cae.Result.DeformationScale
ABSOLUTE - Static variable in class nxopen.cam.CamInspectionOperationCsysreferencetypes: Relative to Absolute Coordinate System
ABSOLUTE - Static variable in class nxopen.cam.InspectionAlignmentBuilder.IterDevTypes: Absolute deviation
ABSOLUTE - Static variable in class nxopen.cam.InspectionAlignmentBuilder.RotateTableMethods: Rotate table to absolute value
ABSOLUTE - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.SirVecPCSABS: Absolute
ABSOLUTE - Static variable in class nxopen.display.BoundedGridBuilder.LabelReferenceType: Use projection of absolute origin on the grid plane to determine grid line offset labels
ABSOLUTE - Static variable in class nxopen.display.DynamicSectionTypes.CoordinateSystem: Absolute
ABSOLUTE - Static variable in class nxopen.features.AestheticFaceBlendBuilder.RhoType: Absolute Rho: does not take into account the subtended angle
ABSOLUTE - Static variable in class nxopen.features.AssociativeArcBuilder.CenterReference: Absolute CSYS
ABSOLUTE - Static variable in class nxopen.features.AssociativeArcBuilder.EndReference: Absolute CSYS
ABSOLUTE - Static variable in class nxopen.features.AssociativeArcBuilder.MidReference: Absolute CSYS
ABSOLUTE - Static variable in class nxopen.features.AssociativeArcBuilder.StartReference: Absolute CSYS
ABSOLUTE - Static variable in class nxopen.features.AssociativeLineBuilder.EndReference: Absolute
ABSOLUTE - Static variable in class nxopen.features.AssociativeLineBuilder.StartReference: Absolute
ABSOLUTE - Static variable in class nxopen.features.EdgeBlendBuilder.Rhotype
ABSOLUTE - Static variable in class nxopen.features.FaceBlendBuilder.RhoMethod: Absolute (NX) rho type
ABSOLUTE - Static variable in class nxopen.features.SectionInertiaAnalysisBuilder.CoordSys: Absolute Coordinate System
ABSOLUTE - Static variable in class nxopen.features.StudioXformBuilder.FeatureType: Deprecated.

Absolute feature type of Xform
ABSOLUTE - Static variable in class nxopen.features.StudioXformBuilderEx.FeatureType: Absolute feature type of Xform
ABSOLUTE - Static variable in class nxopen.features.vehicledesign.BaseDataLoadingWheelBuilder.DataDefinitionOptions: Absolute: The wheel data of this loading will use absolute values.
ABSOLUTE - Static variable in class nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder.CurvatureTypes: Absolute
ABSOLUTE - Static variable in class nxopen.geometricanalysis.GapFlushnessBuilder.EvaluationTypes: absolute
ABSOLUTE - Static variable in class nxopen.geometricanalysis.SurfaceContinuityAnalysisBuilder.CurvatureType
ABSOLUTE - Static variable in class nxopen.geometricutilities.PointsFromFileBuilder.Options: Absolute coordinates
ABSOLUTE - Static variable in class nxopen.IgesCreator.CsysrefEnum: export data with respect to absolute CSYS
ABSOLUTE - Static variable in class nxopen.JtCreator.ChordalValue: ABSOLUTE
ABSOLUTE - Static variable in class nxopen.motion.GraphBuilder.CsysChoices: Absolute
ABSOLUTE - Static variable in class nxopen.motion.MotionSensorBuilder.Reference: absolute reference frame
ABSOLUTE - Static variable in class nxopen.motion.PackagingInterferenceBuilder.Frame: Interference solids positioned in absolute coordinate system.
ABSOLUTE - Static variable in class nxopen.motion.PackagingTraceBuilder.Frame: Traced copies positioned in absolute coordinate system.
ABSOLUTE - Static variable in class nxopen.motion.VobjectCsysType: Absolute csys type
ABSOLUTE - Static variable in class nxopen.tooling.AddReusablePart.PositionMethod
ABSOLUTE - Static variable in class nxopen.uf.UFMotion.ReferenceFrame
ABSOLUTE - Static variable in class nxopen.weld.WeldJointBuilder.CoordinateSystem: Desired points and vectors should be in absolute coordinates.
ABSOLUTE_CYLINDRICAL - Static variable in class nxopen.cae.Result.CoordinateSystem
ABSOLUTE_FLOW - Static variable in class nxopen.routing.SplitDuctBuilder.FlowTypes: Absolute flow
ABSOLUTE_GAP - Static variable in class nxopen.features.SilhouetteFlangeBuilder.Types: Absolute gap Silhouette Flange
ABSOLUTE_MAX - Static variable in class nxopen.cae.AfuMathOperation.TimeToSrsResponseType: Absolute Maximum
ABSOLUTE_MAXIMUM - Static variable in class nxopen.cae.ResultProbeBuilder.CombineAcrossIterations
ABSOLUTE_MINIMUM - Static variable in class nxopen.cae.ResultProbeBuilder.CombineAcrossIterations
ABSOLUTE_ORIGIN - Static variable in class nxopen.assemblies.DesignElementBuilder.PositioningOption: Applies absolute origin position on the design elements
ABSOLUTE_ORIGIN - Static variable in class nxopen.motion.FlexBodyBuilder.Positioning: Positioning to absolution place
ABSOLUTE_PRESSURE - Static variable in class nxopen.cae.Result.Quantity
ABSOLUTE_RECTANGULAR - Static variable in class nxopen.cae.Result.CoordinateSystem
ABSOLUTE_RESULT_PERCENT - Static variable in class nxopen.cae.Post.MarkHide
ABSOLUTE_SPHERICAL - Static variable in class nxopen.cae.Result.CoordinateSystem
ABSOLUTE_TIME - Static variable in class nxopen.motion.SignalChartListItem.Timer: Absolute time
absoluteConvergence() - Method in interface nxopen.cae.optimization.DAOStopCondition: Returns the absolute convergence
License requirements: None.
absoluteConvergenceCriteria() - Method in interface nxopen.optimization.OptimizationBuilder: Returns the absolute criteria for optimizer to determine convergence.
absoluteDiaAroundEdge() - Method in interface nxopen.cae.CircularImprintBuilder: Returns an absolute dia around edge
License requirements: None.
absoluteDiaAroundPoint() - Method in interface nxopen.cae.CircularImprintBuilder: Returns an absolute dia around point
License requirements: None.
ABSOLUTEIN_DISPLAYED_PART - Static variable in class nxopen.features.ToolingBoxBuilder.RefCsysType: reference ABS in displayed part
ABSOLUTELY_POSITIONED - Static variable in class nxopen.pdm.ModelElementRevision.PositioningStatus
absolutelyPosition() - Method in interface nxopen.assemblies.AbsolutePositionBuilder: Returns the option to know whether the object is absolutely positioned or not
License requirements: None.
absoluteMaximumPrincipalAngle() - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder: Returns the absoluteMaximumPrincipalAngle.
absoluteMaximumPrincipalStrain() - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder: Returns the absoluteMaximumPrincipalStrain.
absoluteMaximumPrincipalStress() - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder: Returns the absoluteMaximumPrincipalStress.
absoluteMaximumShearStrain() - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder: Returns the absoluteMaximumShearStrain.
absoluteMaximumShearStress() - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder: Returns the absoluteMaximumShearStress.
absoluteOrigin() - Method in interface nxopen.View: Returns the view origin in absolute space.
AbsolutePositionBuilder - Interface in nxopen.assemblies: Represents a builder class that absolutely positions the specified objects.
absoluteScaleValue - Variable in class nxopen.cae.Result.DeformationParameters: Deprecated.
AbsoluteTextSizeData() - Constructor for class nxopen.display.TransientText.AbsoluteTextSizeData
absoluteValue - Variable in class nxopen.cae.Result.ResultParameters: Deprecated.
ABSORBED_RADIATION - Static variable in class nxopen.cae.Result.Quantity
abspos - Variable in class nxopen.uf.UFSf.AskNodeData
AbstractionManager - Interface in nxopen.cae: Provides method for creating builder for abstraction commands in a fem part
To obtain an instance of this class, refer to FEModel

Created in NX7.5.0
abstractionMgr() - Method in interface nxopen.cae.FEModel: Returns the circular imprint collection belonging to this fem part .
absXValue() - Method in interface nxopen.features.shipdesign.ShipCoordinatesBuilder: Returns the X value in absolute coordinate system.
absYValue() - Method in interface nxopen.features.shipdesign.ShipCoordinatesBuilder: Returns the Y value in absolute coordinate system.
absZValue() - Method in interface nxopen.features.shipdesign.ShipCoordinatesBuilder: Returns the Z value in absolute coordinate system.
AC - Static variable in class nxopen.cae.responsesimulation.RSEventSolverParameters.DdamCoefficientType
acadLayoutsToImport() - Method in interface nxopen.DxfdwgImporter: Returns the AcadLayoutsToImport command - generates a list of ACAD layouts
License requirements: None.
ACCELERATED - Static variable in class nxopen.features.AestheticFaceBlendBuilder.ShapeType: Accelerated option will generate more shapes depending on the size of the center radius and continuity specified.
ACCELERATION - Static variable in class nxopen.cae.responsesimulation.EvaluationResultType
ACCELERATION - Static variable in class nxopen.cae.responsesimulation.SensorResultType
ACCELERATION - Static variable in class nxopen.cae.responsesimulation.TransmissibilityEvaluationSettingBuilder.MotionType
ACCELERATION - Static variable in class nxopen.cae.Result.Quantity
ACCELERATION - Static variable in class nxopen.cae.XyFunctionMeasure: Acceleration unit
acceleration() - Method in interface nxopen.motion.DriverOperation: Deprecated.
Deprecated in NX8.0.0. Obtain the expression using DriverOperation.accelerationExpression() to query or edit it.
ACCELERATION - Static variable in class nxopen.motion.DriverOperation.IntegrationType: Acceleration
ACCELERATION - Static variable in class nxopen.motion.GraphBuilder.RequestChoices: Acceleration
ACCELERATION - Static variable in class nxopen.motion.MotionSensorBuilder.Types: acceleration sensor type
acceleration - Variable in class nxopen.uf.UFMotion.JointMotionInput
ACCELERATION_FT - Static variable in class nxopen.cae.XyFunctionUnit: Acceleration unit: ft/sec^2
ACCELERATION_GS - Static variable in class nxopen.cae.XyFunctionUnit: Acceleration unit: gs
ACCELERATION_IN - Static variable in class nxopen.cae.XyFunctionUnit: Acceleration unit: in/sec ^2
ACCELERATION_LEVEL_CROSSING_RATE - Static variable in class nxopen.cae.Result.Quantity
ACCELERATION_M - Static variable in class nxopen.cae.XyFunctionUnit: Acceleration unit: m/sec^2
ACCELERATION_MM - Static variable in class nxopen.cae.XyFunctionUnit: Acceleration unit: mm/sec^2
accelerationColor() - Method in interface nxopen.preferences.SessionModeling: Returns the acceleration color
License requirements: None.
accelerationExpression() - Method in interface nxopen.motion.DriverOperation: Returns the acceleration expression
License requirements: None.
ACCEPT - Static variable in class nxopen.blockstyler.Tree.EditControlOption: Use this option to allow edit.
ACCEPT - Static variable in class nxopen.Update.FailureOption: Accept failure of failing objects
ACCEPT_ALL - Static variable in class nxopen.Update.FailureOption: Accept failure of failing objects and subsequent objects
ACCEPT_DRIVE_POSITION - Static variable in class nxopen.cam.CAMObject.Attr
ACCEPT_TEXT - Static variable in class nxopen.blockstyler.Tree.EndLabelEditState: Use this option to accept the edited text.
ACCEPTED - Static variable in class nxopen.geometricutilities.ParentEquivalencyMap.Status: accepted
acceptLinkBroken(Tag) - Method in interface nxopen.uf.UFWave: Refer to UF_WAVE_accept_link_broken for documentation.
acceptNewFacetBody() - Method in interface nxopen.features.RapidSurfaceBuilder: Accepts new facet body
License requirements: studio_free_form ("STUDIO FREE FORM")
.
acceptSubdivision() - Method in interface nxopen.features.RapidSurfaceBuilder: Accepts subdivision
License requirements: studio_free_form ("STUDIO FREE FORM")
.
accessVectorMethod() - Method in interface nxopen.cam.SurfaceContourBuilder: Returns the Access Vector Method
License requirements: None.
accuracy() - Method in interface nxopen.display.ImageBasedLighting: Returns the accuracy of the lighting and shadows produced from the given image
License requirements: None.
accuracy() - Method in interface nxopen.MassPropertiesBuilder: Returns the accuracy used for weight calculation during Update Now.
accuracy() - Method in interface nxopen.MeasureFaces: Returns the accuracy value for calculations of the measurement
License requirements: None.
accuracy - Variable in class nxopen.Measurement.MinimumDistanceData: Accuracy of calculation
accuracy - Variable in class nxopen.uf.UFModeling.AskMinimumDist2Data
accuracy - Variable in class nxopen.uf.UFModeling.AskMinimumDist3Data
accuracy - Variable in class nxopen.uf.UFModl.CompareOptions
accuracy - Variable in class nxopen.uf.UFWeight.Properties
achievedLength - Variable in class nxopen.uf.UFModlGeneral.CreateGeodesicCurvesData
ACME - Static variable in class nxopen.cam.DrillThreadMillToolBuilder.ToolFormTypeTypes: Acme
ACME - Static variable in class nxopen.cam.fbm.ThreadFeatureGeometry.Form: Form: Acme
ACME - Static variable in class nxopen.cam.HoleBossGeom.FormTypes: Form: Acme
ACOUSTIC - Static variable in class nxopen.cae.SimLoadSet.Type: Acoustic Source Load Set.
ACOUSTIC - Static variable in class nxopen.cae.SimResultReference.Type: acoustic result
ACOUSTIC_POWER_DENSITY - Static variable in class nxopen.cae.Result.Quantity
ACROMION_HEIGHT - Static variable in class nxopen.HumanData.AdvancedScalingType: Indicate scaling of acromion height
acrossAssemblies() - Method in interface nxopen.routing.TransformPathBuilder: Returns the flag that indicates whether or not to transform. across the assemblies
License requirements: routing_base ("Routing Basic")

Created in NX8.0.0
AcrossVoids - Interface in nxopen.cam: Represents a AcrossVoids
Created in NX6.0.0
acrossVoids() - Method in interface nxopen.cam.MillCutParameters: Returns the across voids
License requirements: None.
AcrossVoids.MotionTypes - Class in nxopen.cam: Available types for Across Voids Method in planar mill operation
ACS_DISPLAY_PART - Static variable in class nxopen.geometricutilities.OrientXpressBuilder.Reference: Reference CSYS is absolute coordinate system in the display part
ACS_WORK_PART - Static variable in class nxopen.geometricutilities.OrientXpressBuilder.Reference: Reference CSYS is absolute coordinate system in the work part
actAccept() - Method in interface nxopen.tooling.TraverseLoopBuilder: Accept current path.
actBack() - Method in interface nxopen.tooling.TraverseLoopBuilder: Traverse back action.
actClose() - Method in interface nxopen.tooling.TraverseLoopBuilder: Close current loop.
actCycle() - Method in interface nxopen.tooling.TraverseLoopBuilder: Cycle candidate path.
actEdgeSelection(NXObject[], NXObject[], NXObject[], Point3d, boolean) - Method in interface nxopen.tooling.TraverseLoopBuilder: Start traverse after selecting edges or curve.
actExit() - Method in interface nxopen.tooling.TraverseLoopBuilder: Exit current loop.
action() - Method in interface nxopen.cam.LowerLimit: Returns the Lower Limit Action
License requirements: None.
action() - Method in interface nxopen.CGMBuilder: Returns the action option to be used when exporting the CGM file when in Teamcenter mode.
action() - Method in interface nxopen.PrintPDFBuilder: Returns the action option to be used when saving the PDF file in a Teamcenter environment.
ACTION_BUTTON - Static variable in class nxopen.uistyler.StylerItem.ItemType: Action Button item
actionAngleTolerance() - Method in interface nxopen.motion.BodyContactLms: Returns the action angle tolerance
License requirements: None.
actionCallback(MenuButtonEvent) - Method in interface nxopen.menubar.MenuBarManager.ActionCallback: Prototype for the action callbacks
License requirements: None.
actionDistanceTolerance() - Method in interface nxopen.motion.BodyContactLms: Returns the action distance tolerance
License requirements: None.
actionEnableMaxFacetSize() - Method in interface nxopen.motion.BodyContactLms: Returns the action enable max facet size
License requirements: None.
actionLink() - Method in interface nxopen.motion.BushingDefine: Returns the action link
License requirements: None.
actionLink() - Method in interface nxopen.motion.ConnectorBuilder: Returns the action link.
actionLink() - Method in interface nxopen.motion.ScalarForceBuilder: Returns the action link
License requirements: None.
actionLink() - Method in interface nxopen.motion.VObject: Returns the action link
License requirements: None.
actionMaxFacetSize() - Method in interface nxopen.motion.BodyContactLms: Returns the action max facet size
License requirements: None.
actionPoint() - Method in interface nxopen.motion.BushingDefine: Returns the action point
License requirements: None.
actionPoint() - Method in interface nxopen.motion.ConnectorBuilder: Returns the action point.
actionPoint() - Method in interface nxopen.motion.ScalarForceBuilder: Returns the action point
License requirements: None.
actionType() - Method in interface nxopen.drawings.MarkAsTemplateBuilder: Returns the action type of the part.
actionType() - Method in interface nxopen.motion.PackagingInterferenceBuilder: Returns the PackagingInterference action type defined at PackagingInterferenceBuilder.Action
License requirements: mechanisms ("MECHANISMS")

Created in NX4.0.0
actionType() - Method in interface nxopen.tooling.EjectorPostProcessingBuilder: Returns the trim method of ejector pin post processing.
actionType() - Method in interface nxopen.tooling.TrimMoldComponentsBuilder: Returns the action type defines the current trim method used to processing a mold components.
actionType() - Method in interface nxopen.tooling.TrimSolidBuilder: Returns the action type of trim, subtract or just keep the region and the bounding box.
actionWhenGouging() - Method in interface nxopen.cam.MillCutParameters: Returns the action when gouging
License requirements: None.
activate() - Method in interface nxopen.assemblies.Order: Applies this order
License requirements: None.
activate() - Method in interface nxopen.assemblies.PositioningTask: Activates the PositioningTask .
activate(boolean) - Method in interface nxopen.cae.responsesimulation.ModalProperties: Sets activate or deactivate status for all normal modes
License requirements: nx_response_anlys ("NX Response Analysis")
.
activate(boolean) - Method in interface nxopen.features.PartModule: Indicates whether the part module is to be activated.
activate() - Method in interface nxopen.geometricutilities.PartModuleOutputBuilder: Deprecated.
Deprecated in NX9.0.0. Please use PartModule.activate(boolean) instead.
activate(TransformerData.ObjectType) - Method in interface nxopen.geometricutilities.TransformerData: Sets a component of the tool to be active.
activate() - Method in interface nxopen.layout2d.Component: Activates the component.
activate(boolean) - Method in interface nxopen.motion.FlexBody: Sets activate or deactivate status for all normal modes
License requirements: mechanisms ("MECHANISMS")
.
activate(Sketch.ViewReorient) - Method in interface nxopen.Sketch: Activates the sketch
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.
activate(StylerEvent) - Method in interface nxopen.uistyler.ButtonLayout.Activate: Called when a dialog user clicks on a push button or presses the spacebar when a push button has keyboard focus.
activate(StylerEvent) - Method in interface nxopen.uistyler.IntegerItem.Activate: Called when a dialog user enters a valid integer value and presses Return
License requirements: None.
activate(StylerEvent) - Method in interface nxopen.uistyler.MultiSelectList.Activate: License requirements: None.
activate(StylerEvent) - Method in interface nxopen.uistyler.OptionMenu.Activate: Called when a dialog user selects an option from the menu.
activate(StylerEvent) - Method in interface nxopen.uistyler.OptionToggle.Activate: Called when a dialog user selects an option from the menu
License requirements: None.
activate(StylerEvent) - Method in interface nxopen.uistyler.PushButton.Activate: Called when a dialog user clicks on the push button or presses the spacebar when the push button has keyboard focus.
activate(StylerEvent) - Method in interface nxopen.uistyler.RealItem.Activate: Called when a dialog user enters a valid real value and presses Return.
activate(StylerEvent) - Method in interface nxopen.uistyler.SelectionBox.Activate: Called when a dialog user selects a list entry with a single mouse click, presses the spacebar on a selected list entry, or presses Return when the cursor is in the text field.
activate(StylerEvent) - Method in interface nxopen.uistyler.SingleSelectList.Activate: Called when a dialog user selects an entry with a single mouse click or presses the spacebar on an already selected item.
activate(StylerEvent) - Method in interface nxopen.uistyler.StringItem.Activate: Called when a dialog user enters a character string and presses Return.
activate(StylerEvent) - Method in interface nxopen.uistyler.ToolPalette.Activate: Called when a dialog user selects a button in the tool palette.
activate(StylerEvent) - Method in interface nxopen.uistyler.WideString.Activate: Called when a dialog user enters a character string and presses Return.
ACTIVATE_REASON - Static variable in class nxopen.uistyler.StylerEvent.Reason: Activate reason
activateBaseline() - Method in interface nxopen.annotations.OrdinateBaselineBuilder: Returns the activate baseline
License requirements: None.
activateCurrentVisualReport() - Method in interface nxopen.visualreporting.VisualReportManager: Activates the VisualReportManager.current() visual report.
activatedPage() - Method in interface nxopen.uistyler.PageSwitchData: Returns the activated page
License requirements: None.
activateFeatureGroupWithRollback() - Method in interface nxopen.preferences.SessionModeling: Returns the flag to activate the feature group with rollback or not, if the flag is true, the highest member feature will be made as current feature
License requirements: None.
activateFile(File) - Method in interface nxopen.markup.MarkupFileCollection: Activates a nxopen.Markup.File
License requirements: None.
activateForSketching() - Method in interface nxopen.drawings.DraftingView: Sets this drafting view as the active sketch view.
activateGrid(UFDisp.GridContext) - Method in interface nxopen.uf.UFDisp: Refer to UF_DISP_activate_grid for documentation.
activatePartModule() - Method in interface nxopen.features.PartModuleBuilder: Returns the option indicating whether part module is to be activated.
activatePerpendicular() - Method in interface nxopen.annotations.OrdinateBaselineBuilder: Returns the activate perpendicular
License requirements: None.
activatePositioningGroup(PositioningGroup) - Method in interface nxopen.assemblies.PositioningTask: Activates the nxopen.assemblies.PositioningGroup in the positioning task.
activateSequence(Tag) - Method in interface nxopen.uf.UFAssem: Refer to UF_ASSEM_activate_sequence for documentation.
activateSolution() - Method in interface nxopen.cae.optimization.DAOSolution: Activates the optimization solution setup
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
activateTool(UFVariant, String) - Method in interface nxopen.uf.UFSim: Refer to UF_SIM_activate_tool for documentation.
active() - Method in interface nxopen.cae.LaminateDynamicSimCollection: Returns the active laminate dynamic sim
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
active() - Method in interface nxopen.cae.responsesimulation.NormalMode: Returns the activate status
License requirements: nx_response_anlys ("NX Response Analysis")
.
ACTIVE - Static variable in class nxopen.cam.TurnAvoidancePathPointsBuilder.PointStatus: Point Status: Active
ACTIVE - Static variable in class nxopen.ConvertToFromReferenceBuilder.OutputType: Outputs become active objects.
ACTIVE - Static variable in class nxopen.drawings.ViewProjectionBuilder.CurveType: Active
active() - Method in interface nxopen.features.vehicledesign.BaseDataLoadingBuilder: Returns the status to indicate whether the loading is active or not.
active() - Method in interface nxopen.features.vehicledesign.BaseDataPassengerBuilder: Returns the status to indicate whether the passenger is active or not.
active() - Method in interface nxopen.motion.NormalModeProperty: Returns the activate status for each normal mode
License requirements: mechanisms ("MECHANISMS")
.
active() - Method in interface nxopen.ObjectGeneralPropertiesBuilder: Returns the active.
ACTIVE - Static variable in class nxopen.sim.KinematicSinumerikCaBuilder.PlcInitStateTypes: Active
ACTIVE - Static variable in class nxopen.uf.UFSket.ReferenceStatus
active() - Method in interface nxopen.weld.CharacteristicsValueBuilder: Returns the indication if the attribute is to be placed on the output. true indicates the attribute will be placed on the output, false indicates the attribute will not be placed on the output.
ACTIVE_REACH - Static variable in class nxopen.HumanData.InverseKinematicsType: Indicate active reach type of inverse kinematics
ACTIVE_VIEW - Static variable in class nxopen.uf.UFDraw.ViewStatus
activeAll() - Method in interface nxopen.motion.PhysicsConversionBuilder: The active button.
activeArrangement() - Method in interface nxopen.assemblies.ComponentAssembly: Returns the currently active Arrangement for this ComponentAssembly
License requirements: assemblies ("ASSEMBLIES MODULE")

Created in NX3.0.0
activeButton() - Method in interface nxopen.menubar.MenuButtonEvent: Returns the activated MenuButton.
activeClassifier() - Method in interface nxopen.visualreporting.Rule: Returns the active Classifier in this Rule for a multiple properties report.
activeConditionSequence() - Method in interface nxopen.cae.SimConditionSeqMgr: Returns the currently active Condition Sequence.
activeDynamicSection() - Method in interface nxopen.ModelingView: Returns the active dynamic section object in the modeling view.
activeEvent() - Method in interface nxopen.cae.responsesimulation.Solution: Returns the active event
License requirements: nx_response_anlys ("NX Response Analysis")
.
activeEventSolveOptions() - Method in interface nxopen.cae.DurabilitySolverBuilder: Returns the active event solve options.
activeExciterConfig() - Method in interface nxopen.cae.PreTestExciterConfigCollection: Returns the pre-test active exciter configuration
License requirements: None.
activeFront() - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder: Returns the value indicating if the front barrier is displayed.
activeGroup() - Method in interface nxopen.features.FeatureCollection: Returns the active feature group.
activeHorizontalMargin() - Method in interface nxopen.annotations.BaseOrdinateDimensionBuilder: Returns the active horizontal margin(defined or inferred) where horizontal dimension will be automatically placed.
activePage() - Method in interface nxopen.blockstyler.TabControl: Returns the ActivePage
License requirements: None.
activePart(Tag, int) - Method in interface nxopen.uf.UFModeling: Refer to UF_MODL_active_part for documentation.
activeplane - Variable in class nxopen.display.DynamicSectionBuilder.ActivePlaneData
activePlane - Variable in class nxopen.ModelingView.OtherSectionAttrT: Deprecated.

To select the 'active' plane (of the 2 set)
ActivePlaneData() - Constructor for class nxopen.display.DynamicSectionBuilder.ActivePlaneData
activePretest() - Method in interface nxopen.cae.PreTestSolutionCollection: Returns the active pre-test
License requirements: None.
activeRear() - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder: Returns the value indicating if the rear barrier is displayed.
activeRegionEndFactor - Variable in class nxopen.cae.Post.AnimationStreamline: between 0.0 and 1.0
activeRegionStartFactor - Variable in class nxopen.cae.Post.AnimationStreamline: between 0.0 and 1.0
activeRowIndex() - Method in interface nxopen.features.shipdesign.QualifySketchBuilder: Returns the active row index.
activeSensorConfig() - Method in interface nxopen.cae.PreTestSensorConfigCollection: Returns the pre-test active sensor configuration
License requirements: None.
activeSide() - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder: Returns the value indicating if the side barrier is displayed.
activeSketch() - Method in interface nxopen.Session: Returns the active sketch
License requirements: None.
activeSketchViewColor() - Method in interface nxopen.drawings.ViewWorkflowBuilder: Returns the active views border color
License requirements: None.
activeSolution() - Method in interface nxopen.cae.CorrelSolutionCollection: Returns the active solution
License requirements: None.
activeSolution() - Method in interface nxopen.cae.ModelUpdateSolutionCollection: Returns the active solution
License requirements: None.
activeSolution() - Method in interface nxopen.cae.responsesimulation.SolutionCollection: Returns the active solution
License requirements: nx_response_anlys ("NX Response Analysis")
.
activeSolution() - Method in interface nxopen.cae.SimSimulation: Returns the active solution
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
activeStatus() - Method in interface nxopen.cae.LaminateGlobalLayup: Returns the global layup active status
License requirements: nx_lam_composites ("Laminate Composites")
.
activeStatus() - Method in interface nxopen.mechatronics.GanttOperationBuilder: Returns the active status
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
activeStep() - Method in interface nxopen.cae.SimSolution: Returns the active step
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
activeSubdivisionBodyFeature() - Method in interface nxopen.SubdivisionTaskEnvironment: Returns the active subdivision body feature.
activeTabPage() - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder: Returns the active tab page.
activeTemplate() - Method in interface nxopen.cae.xyplot.BaseTemplateManager: Returns the active template file
License requirements: nx_ftk ("NX Advanced Graphing")
.
activetemplate - Variable in class nxopen.cam.FeatureProcessBuilder.TemplateData: the template used
activeVerticalMargin() - Method in interface nxopen.annotations.BaseOrdinateDimensionBuilder: Returns the active vertical margin(defined or inferred) where horizontal dimension will be automatically placed.
ActiveView - Class in nxopen.motion: Definitions of post articulation and spreadsheet run active view type
activeView() - Method in interface nxopen.motion.ArticulationControl: Returns the active view
License requirements: mechanisms ("MECHANISMS")
.
activeView() - Method in interface nxopen.motion.SpreadsheetRunControl: Returns the active view
License requirements: mechanisms ("MECHANISMS")
.
activeViewColor() - Method in interface nxopen.preferences.PartDrafting: Returns the drafting active view color.
activeZone() - Method in interface nxopen.features.vehicledesign.HeadImpactBuilder: Returns the activate exclusion zone flag for this head impact study.
activityStatus() - Method in interface nxopen.cae.DurabilityEvent: Returns the activity status of the event.
actLinkConditionButton() - Method in interface nxopen.cae.optimization.TBSShapeRestrictAreaBuilder: Returns the link condition
License requirements: None.
ACTUAL - Static variable in class nxopen.cae.xyplot.DecimalFormat: Show decimal automatically
ACTUAL - Static variable in class nxopen.cam.InspectionAlignmentBuilder.SaveStates: Save Actual PCS
ACTUAL_DRF - Static variable in class nxopen.cam.InspectionMeasDataBuilder.DisplayTransformTypes: Actual DRF
acutelyAngledWallsChecker() - Method in interface nxopen.features.AnalyzePocketBuilder: Returns the flag specifying whether to check acutely angled walls.
AD - Static variable in class nxopen.cae.responsesimulation.RSEventSolverParameters.DdamCoefficientType
ADAMS - Static variable in class nxopen.motion.MotionEnvironment.Solver: Motion solver Adams
adamsFriction() - Method in interface nxopen.motion.JointFriction: Returns the joint adams friction
License requirements: mechanisms ("MECHANISMS")
.
adamsParameters() - Method in interface nxopen.motion.BodyContactBuilder: Returns the 3D BodyContact's subobject (the adams parameters)
License requirements: None.
adamsParameters() - Method in interface nxopen.motion.CurveContactBuilder: Returns the 2D CurveContact's subobject (the adams parameters)
License requirements: None.
AdamsSolverProperty - Interface in nxopen.motion: Represents a AdamsSolverProperty
Created in NX5.0.0
adamsSolverProperty() - Method in interface nxopen.motion.MotionSolutionBuilder: Returns the Adams Solver property
License requirements: None.
AdapterFormula - Interface in nxopen.mechatronics: Represents the Adapter Formula class.
AdapterFormulaBuilder - Interface in nxopen.mechatronics: Represents a AdapterFormulaBuilder .
AdapterFormulaCollection - Interface in nxopen.mechatronics: Represents a collection of Adapter Formula.
adapterFormulas() - Method in interface nxopen.mechatronics.PhysicsManager: Returns the AdapterFormulaCollection belonging to this part
Created in NX8.5.0
AdapterSignal - Interface in nxopen.mechatronics: Represents the Adapter Signal class.
AdapterSignalBuilder - Interface in nxopen.mechatronics: Represents a AdapterSignalBuilder .
AdapterSignalCollection - Interface in nxopen.mechatronics: Represents a collection of Adapter Signal.
adapterSignals() - Method in interface nxopen.mechatronics.PhysicsManager: Returns the AdapterSignalCollection belonging to this part
Created in NX8.5.0
ADAPTIVE_ELEMENT_STRESS_ERROR - Static variable in class nxopen.cae.Result.Quantity
ADAPTIVE_NODAL_MESH_REFINEMENT_LEVEL - Static variable in class nxopen.cae.Result.Quantity
adaptiveScaleLimits() - Method in interface nxopen.blockstyler.AngularDimension: Returns the AdaptiveScaleLimits.
adaptiveScaleLimits() - Method in interface nxopen.blockstyler.DoubleBlock: Returns the AdaptiveScaleLimits
License requirements: None.
adaptiveScaleLimits() - Method in interface nxopen.blockstyler.ExpressionBlock: Returns the AdaptiveScaleLimits.
adaptiveScaleLimits() - Method in interface nxopen.blockstyler.IntegerBlock: Returns the AdaptiveScaleLimits
License requirements: None.
adaptiveScaleLimits() - Method in interface nxopen.blockstyler.LinearDimension: Returns the AdaptiveScaleLimits.
adaptiveScaleLimits() - Method in interface nxopen.blockstyler.OnPathDimension: Returns the AdaptiveScaleLimits.
adaptiveScaleLimits() - Method in interface nxopen.blockstyler.RadiusDimension: Returns the AdaptiveScaleLimits.
AdaptiveShell - Interface in nxopen.features: Represents a adaptive shell feature
To create or edit an instance of this class, use AdaptiveShellBuilder

Created in NX6.0.0
AdaptiveShellBuilder - Interface in nxopen.features: Represents a AdaptiveShell builder
To create a new instance of this class, use FeatureCollection.createAdaptiveShellBuilder(nxopen.features.AdaptiveShell)
Default values.
adaptivity - Variable in class nxopen.uf.UFSf.AskElementData
AdaptivityExclusionZone - Interface in nxopen.cae: Represents a AdaptivityExclusionZone .
AdaptivityExclusionZoneBuilder - Interface in nxopen.cae: Builds a AdaptivityExclusionZone object which represets adaptivity meta solution related exclusion zones.
AdaptivityExclusionZoneCollection - Interface in nxopen.cae: Represents a collection of correl meta solution.
adaptivityExclusionZones() - Method in interface nxopen.cae.AdaptivityMetaSolution: Returns the CAE Adaptivity exclusion zone collection belonging to this sim part .
AdaptivityMetaSolution - Interface in nxopen.cae: Represents a AdaptivityMetaSolution .
AdaptivityMetaSolutionBuilder - Interface in nxopen.cae: Builds a AdaptivityMetaSolution object which represets a recipe for generating adaptive remesh.
AdaptivityMetaSolutionCollection - Interface in nxopen.cae: Represents a collection of adaptivity meta solution.
adaptivitySolutions() - Method in interface nxopen.cae.SimSimulation: Returns the CAE Adaptivity collection belonging to this sim part .
add(Annotation) - Method in interface nxopen.annotations.SelectAnnotationList: Adds an object to the list
License requirements: None.
add(Annotation[]) - Method in interface nxopen.annotations.SelectAnnotationList: Adds a set of objects to the list
License requirements: None.
add(Annotation, View, Point3d) - Method in interface nxopen.annotations.SelectAnnotationList: Adds the object with the objects view and objects point
License requirements: None.
add(BaseCustomSymbol) - Method in interface nxopen.annotations.SelectBaseCustomSymbolList: Adds an object to the list
License requirements: None.
add(BaseCustomSymbol[]) - Method in interface nxopen.annotations.SelectBaseCustomSymbolList: Adds a set of objects to the list
License requirements: None.
add(SelectionMethod) - Method in interface nxopen.annotations.SelectBaseCustomSymbolList: Adds the objects from a SelectionMethod to the list
License requirements: None.
add(BaseCustomSymbol, View, Point3d) - Method in interface nxopen.annotations.SelectBaseCustomSymbolList: Adds the object with the objects view and objects point
License requirements: None.
add(OrdinateDimension) - Method in interface nxopen.annotations.SelectOrdinateDimensionList: Adds an object to the list
License requirements: None.
add(OrdinateDimension[]) - Method in interface nxopen.annotations.SelectOrdinateDimensionList: Adds a set of objects to the list
License requirements: None.
add(SelectionMethod) - Method in interface nxopen.annotations.SelectOrdinateDimensionList: Adds the objects from a SelectionMethod to the list
License requirements: None.
add(OrdinateDimension, View, Point3d) - Method in interface nxopen.annotations.SelectOrdinateDimensionList: Adds the object with the objects view and objects point
License requirements: None.
add(TableSection) - Method in interface nxopen.annotations.SelectTableSectionList: Adds an object to the list
License requirements: None.
add(TableSection[]) - Method in interface nxopen.annotations.SelectTableSectionList: Adds a set of objects to the list
License requirements: None.
add(SelectionMethod) - Method in interface nxopen.annotations.SelectTableSectionList: Adds the objects from a SelectionMethod to the list
License requirements: None.
add(TableSection, View, Point3d) - Method in interface nxopen.annotations.SelectTableSectionList: Adds the object with the objects view and objects point
License requirements: None.
add(Component) - Method in interface nxopen.assemblies.SelectComponentList: Adds an object to the list
License requirements: None.
add(Component[]) - Method in interface nxopen.assemblies.SelectComponentList: Adds a set of objects to the list
License requirements: None.
add(SelectionMethod) - Method in interface nxopen.assemblies.SelectComponentList: Adds the objects from a SelectionMethod to the list
License requirements: None.
add(Component, View, Point3d) - Method in interface nxopen.assemblies.SelectComponentList: Adds the object with the objects view and objects point
License requirements: None.
ADD - Static variable in class nxopen.cae.AfuMathOperation.MultiType: Adds AFU records
add(CAEBody) - Method in interface nxopen.cae.SelectCAEBodyList: Adds an object to the list
License requirements: None.
add(CAEBody[]) - Method in interface nxopen.cae.SelectCAEBodyList: Adds a set of objects to the list
License requirements: None.
add(SelectionMethod) - Method in interface nxopen.cae.SelectCAEBodyList: Adds the objects from a SelectionMethod to the list
License requirements: None.
add(CAEBody, View, Point3d) - Method in interface nxopen.cae.SelectCAEBodyList: Adds the object with the objects view and objects point
License requirements: None.
add(CAEEdge) - Method in interface nxopen.cae.SelectCAEEdgeList: Adds an object to the list
License requirements: None.
add(CAEEdge[]) - Method in interface nxopen.cae.SelectCAEEdgeList: Adds a set of objects to the list
License requirements: None.
add(SelectionMethod) - Method in interface nxopen.cae.SelectCAEEdgeList: Adds the objects from a SelectionMethod to the list
License requirements: None.
add(CAEEdge, View, Point3d) - Method in interface nxopen.cae.SelectCAEEdgeList: Adds the object with the objects view and objects point
License requirements: None.
add(CAEFace) - Method in interface nxopen.cae.SelectCAEFaceList: Adds an object to the list
License requirements: None.
add(CAEFace[]) - Method in interface nxopen.cae.SelectCAEFaceList: Adds a set of objects to the list
License requirements: None.
add(SelectionMethod) - Method in interface nxopen.cae.SelectCAEFaceList: Adds the objects from a SelectionMethod to the list
License requirements: None.
add(CAEFace, View, Point3d) - Method in interface nxopen.cae.SelectCAEFaceList: Adds the object with the objects view and objects point
License requirements: None.
add(FEElemFace) - Method in interface nxopen.cae.SelectFEElemFaceList: Adds an object to the list
License requirements: None.
add(FEElemFace[]) - Method in interface nxopen.cae.SelectFEElemFaceList: Adds a set of objects to the list
License requirements: None.
add(SelectionMethod) - Method in interface nxopen.cae.SelectFEElemFaceList: Adds the objects from a SelectionMethod to the list
License requirements: None.
add(FEElemFace, View, Point3d) - Method in interface nxopen.cae.SelectFEElemFaceList: Adds the object with the objects view and objects point
License requirements: None.
add(FENode) - Method in interface nxopen.cae.SelectFENodeList: Adds an object to the list
License requirements: None.
add(FENode[]) - Method in interface nxopen.cae.SelectFENodeList: Adds a set of objects to the list
License requirements: None.
add(FENode, View, Point3d) - Method in interface nxopen.cae.SelectFENodeList: Adds the object with the objects view and objects point
License requirements: None.
add(Mesh) - Method in interface nxopen.cae.SelectMeshList: Adds an object to the list
License requirements: None.
add(Mesh[]) - Method in interface nxopen.cae.SelectMeshList: Adds a set of objects to the list
License requirements: None.
add(SelectionMethod) - Method in interface nxopen.cae.SelectMeshList: Adds the objects from a SelectionMethod to the list
License requirements: None.
add(Mesh, View, Point3d) - Method in interface nxopen.cae.SelectMeshList: Adds the object with the objects view and objects point
License requirements: None.
ADD - Static variable in class nxopen.cae.SimBcPlotContoursBuilder.ResolveOverlapType
ADD - Static variable in class nxopen.cae.SimBcXyPlotBuilder.ResolveMultipleMatches
add(int, double, double, double, double) - Method in interface nxopen.cam.HolderSectionBuilder: Add a new holder section item
License requirements: cam_base ("CAM BASE")
.
add(int, String, double, double, double, int, int, int, int, int) - Method in interface nxopen.cam.MillingTrackpointBuilder: Deprecated.
Deprecated in NX10.0.0. Use new version with additional arguments instead.
add(int, String, int, double, double, double, int, int, int, int, int) - Method in interface nxopen.cam.MillingTrackpointBuilder: Add a new track point, the input name will be changed if it is not unique.
add(int, int, double, int) - Method in interface nxopen.cam.MultipleStepoverBuilder: Add a new item
License requirements: cam_base ("CAM BASE")
.
add(CAMFeature) - Method in interface nxopen.cam.SelectCAMFeatureList: Adds an object to the list
License requirements: None.
add(CAMFeature[]) - Method in interface nxopen.cam.SelectCAMFeatureList: Adds a set of objects to the list
License requirements: None.
add(CAMFeature, View, Point3d) - Method in interface nxopen.cam.SelectCAMFeatureList: Adds the object with the objects view and objects point
License requirements: None.
add(int, double, double, double, double) - Method in interface nxopen.cam.StepParamsBuilder: Create a new step params item
License requirements: cam_base ("CAM BASE")
.
add(int, int, double) - Method in interface nxopen.cam.TurnRoughVariableIncrementBuilder: Add a new item
License requirements: cam_base ("CAM BASE")
.
add(int, double) - Method in interface nxopen.cam.TurnThreadFinishPassesBuilder: Create a new finish passes item.
ADD - Static variable in class nxopen.drawings.AddRemoveBoxViewBuilder.ModeType: Add mode
add(DraftingView) - Method in interface nxopen.drawings.SelectDraftingViewList: Adds an object to the list
License requirements: None.
add(DraftingView[]) - Method in interface nxopen.drawings.SelectDraftingViewList: Adds a set of objects to the list
License requirements: None.
add(SelectionMethod) - Method in interface nxopen.drawings.SelectDraftingViewList: Adds the objects from a SelectionMethod to the list
License requirements: None.
add(DraftingView, View, Point3d) - Method in interface nxopen.drawings.SelectDraftingViewList: Adds the object with the objects view and objects point
License requirements: None.
add(DrawingView) - Method in interface nxopen.drawings.SelectDrawingViewList: Adds an object to the list
License requirements: None.
add(DrawingView[]) - Method in interface nxopen.drawings.SelectDrawingViewList: Adds a set of objects to the list
License requirements: None.
add(SelectionMethod) - Method in interface nxopen.drawings.SelectDrawingViewList: Adds the objects from a SelectionMethod to the list
License requirements: None.
add(DrawingView, View, Point3d) - Method in interface nxopen.drawings.SelectDrawingViewList: Adds the object with the objects view and objects point
License requirements: None.
add(FacetedBody) - Method in interface nxopen.facet.SelectFacetedBodyList: Adds an object to the list
License requirements: None.
add(FacetedBody[]) - Method in interface nxopen.facet.SelectFacetedBodyList: Adds a set of objects to the list
License requirements: None.
add(SelectionMethod) - Method in interface nxopen.facet.SelectFacetedBodyList: Adds the objects from a SelectionMethod to the list
License requirements: None.
add(FacetedBody, View, Point3d) - Method in interface nxopen.facet.SelectFacetedBodyList: Adds the object with the objects view and objects point
License requirements: None.
ADD - Static variable in class nxopen.features.PasteFaceBuilder.PasteOptionType: each tool body will add to the target body.
add(DatumCsys) - Method in interface nxopen.features.SelectDatumCsysList: Adds an object to the list
License requirements: None.
add(DatumCsys[]) - Method in interface nxopen.features.SelectDatumCsysList: Adds a set of objects to the list
License requirements: None.
add(SelectionMethod) - Method in interface nxopen.features.SelectDatumCsysList: Adds the objects from a SelectionMethod to the list
License requirements: None.
add(DatumCsys, View, Point3d) - Method in interface nxopen.features.SelectDatumCsysList: Adds the object with the objects view and objects point
License requirements: None.
add(Feature) - Method in interface nxopen.features.SelectFeatureList: Adds an object to the list
License requirements: None.
add(Feature[]) - Method in interface nxopen.features.SelectFeatureList: Adds a set of objects to the list
License requirements: None.
add(Feature, View, Point3d) - Method in interface nxopen.features.SelectFeatureList: Adds the object with the objects view and objects point
License requirements: None.
ADD - Static variable in class nxopen.geometricutilities.PatternIncrementItem.OperationEnum: add the increment to the master value.
add(Component) - Method in interface nxopen.layout2d.SelectComponentList: Adds an object to the list
License requirements: None.
add(Component[]) - Method in interface nxopen.layout2d.SelectComponentList: Adds a set of objects to the list
License requirements: None.
add(SelectionMethod) - Method in interface nxopen.layout2d.SelectComponentList: Adds the objects from a SelectionMethod to the list
License requirements: None.
add(Component, View, Point3d) - Method in interface nxopen.layout2d.SelectComponentList: Adds the object with the objects view and objects point
License requirements: None.
add(CollisionSensor) - Method in interface nxopen.mechatronics.SelectCollisionSensorList: Adds an object to the list
License requirements: None.
add(CollisionSensor[]) - Method in interface nxopen.mechatronics.SelectCollisionSensorList: Adds a set of objects to the list
License requirements: None.
add(SelectionMethod) - Method in interface nxopen.mechatronics.SelectCollisionSensorList: Adds the objects from a SelectionMethod to the list
License requirements: None.
add(CollisionSensor, View, Point3d) - Method in interface nxopen.mechatronics.SelectCollisionSensorList: Adds the object with the objects view and objects point
License requirements: None.
add(LogicObject) - Method in interface nxopen.mechatronics.SelectLogicObjectList: Adds an object to the list
License requirements: None.
add(LogicObject[]) - Method in interface nxopen.mechatronics.SelectLogicObjectList: Adds a set of objects to the list
License requirements: None.
add(SelectionMethod) - Method in interface nxopen.mechatronics.SelectLogicObjectList: Adds the objects from a SelectionMethod to the list
License requirements: None.
add(LogicObject, View, Point3d) - Method in interface nxopen.mechatronics.SelectLogicObjectList: Adds the object with the objects view and objects point
License requirements: None.
add(Body) - Method in interface nxopen.SelectBodyList: Adds an object to the list
License requirements: None.
add(Body[]) - Method in interface nxopen.SelectBodyList: Adds a set of objects to the list
License requirements: None.
add(SelectionMethod) - Method in interface nxopen.SelectBodyList: Adds the objects from a SelectionMethod to the list
License requirements: None.
add(Body, View, Point3d) - Method in interface nxopen.SelectBodyList: Adds the object with the objects view and objects point
License requirements: None.
add(CoordinateSystem) - Method in interface nxopen.SelectCoordinateSystemList: Adds an object to the list
License requirements: None.
add(CoordinateSystem[]) - Method in interface nxopen.SelectCoordinateSystemList: Adds a set of objects to the list
License requirements: None.
add(SelectionMethod) - Method in interface nxopen.SelectCoordinateSystemList: Adds the objects from a SelectionMethod to the list
License requirements: None.
add(CoordinateSystem, View, Point3d) - Method in interface nxopen.SelectCoordinateSystemList: Adds the object with the objects view and objects point
License requirements: None.
add(Curve) - Method in interface nxopen.SelectCurveList: Adds an object to the list
License requirements: None.
add(Curve[]) - Method in interface nxopen.SelectCurveList: Adds a set of objects to the list
License requirements: None.
add(SelectionMethod) - Method in interface nxopen.SelectCurveList: Adds the objects from a SelectionMethod to the list
License requirements: None.
add(Curve, View, Point3d) - Method in interface nxopen.SelectCurveList: Adds the object with the objects view and objects point
License requirements: None.
add(DatumPlane) - Method in interface nxopen.SelectDatumPlaneList: Adds an object to the list
License requirements: None.
add(DatumPlane[]) - Method in interface nxopen.SelectDatumPlaneList: Adds a set of objects to the list
License requirements: None.
add(SelectionMethod) - Method in interface nxopen.SelectDatumPlaneList: Adds the objects from a SelectionMethod to the list
License requirements: None.
add(DatumPlane, View, Point3d) - Method in interface nxopen.SelectDatumPlaneList: Adds the object with the objects view and objects point
License requirements: None.
add(DisplayableObject) - Method in interface nxopen.SelectDisplayableObjectList: Adds an object to the list
License requirements: None.
add(DisplayableObject[]) - Method in interface nxopen.SelectDisplayableObjectList: Adds a set of objects to the list
License requirements: None.
add(SelectionMethod) - Method in interface nxopen.SelectDisplayableObjectList: Adds the objects from a SelectionMethod to the list
License requirements: None.
add(DisplayableObject, View, Point3d) - Method in interface nxopen.SelectDisplayableObjectList: Adds the object with the objects view and objects point
License requirements: None.
add(Edge) - Method in interface nxopen.SelectEdgeList: Adds an object to the list
License requirements: None.
add(Edge[]) - Method in interface nxopen.SelectEdgeList: Adds a set of objects to the list
License requirements: None.
add(SelectionMethod) - Method in interface nxopen.SelectEdgeList: Adds the objects from a SelectionMethod to the list
License requirements: None.
add(Edge, View, Point3d) - Method in interface nxopen.SelectEdgeList: Adds the object with the objects view and objects point
License requirements: None.
add(Expression) - Method in interface nxopen.SelectExpressionList: Adds an object to the list
License requirements: None.
add(Expression[]) - Method in interface nxopen.SelectExpressionList: Adds a set of objects to the list
License requirements: None.
add(SelectionMethod) - Method in interface nxopen.SelectExpressionList: Adds the objects from a SelectionMethod to the list
License requirements: None.
add(Expression, View, Point3d) - Method in interface nxopen.SelectExpressionList: Adds the object with the objects view and objects point
License requirements: None.
add(Face) - Method in interface nxopen.SelectFaceList: Adds an object to the list
License requirements: None.
add(Face[]) - Method in interface nxopen.SelectFaceList: Adds a set of objects to the list
License requirements: None.
add(SelectionMethod) - Method in interface nxopen.SelectFaceList: Adds the objects from a SelectionMethod to the list
License requirements: None.
add(Face, View, Point3d) - Method in interface nxopen.SelectFaceList: Adds the object with the objects view and objects point
License requirements: None.
add(IBaseCurve) - Method in interface nxopen.SelectIBaseCurveList: Adds an object to the list
License requirements: None.
add(IBaseCurve[]) - Method in interface nxopen.SelectIBaseCurveList: Adds a set of objects to the list
License requirements: None.
add(SelectionMethod) - Method in interface nxopen.SelectIBaseCurveList: Adds the objects from a SelectionMethod to the list
License requirements: None.
add(IBaseCurve, View, Point3d) - Method in interface nxopen.SelectIBaseCurveList: Adds the object with the objects view and objects point
License requirements: None.
add(IBasePlane) - Method in interface nxopen.SelectIBasePlaneList: Adds an object to the list
License requirements: None.
add(IBasePlane[]) - Method in interface nxopen.SelectIBasePlaneList: Adds a set of objects to the list
License requirements: None.
add(SelectionMethod) - Method in interface nxopen.SelectIBasePlaneList: Adds the objects from a SelectionMethod to the list
License requirements: None.
add(IBasePlane, View, Point3d) - Method in interface nxopen.SelectIBasePlaneList: Adds the object with the objects view and objects point
License requirements: None.
add(ICurve) - Method in interface nxopen.SelectICurveList: Adds an object to the list
License requirements: None.
add(ICurve[]) - Method in interface nxopen.SelectICurveList: Adds a set of objects to the list
License requirements: None.
add(SelectionMethod) - Method in interface nxopen.SelectICurveList: Adds the objects from a SelectionMethod to the list
License requirements: None.
add(ICurve, View, Point3d) - Method in interface nxopen.SelectICurveList: Adds the object with the objects view and objects point
License requirements: None.
add(INXObject) - Method in interface nxopen.SelectINXObjectList: Adds an object to the list
License requirements: None.
add(INXObject[]) - Method in interface nxopen.SelectINXObjectList: Adds a set of objects to the list
License requirements: None.
add(SelectionMethod) - Method in interface nxopen.SelectINXObjectList: Adds the objects from a SelectionMethod to the list
License requirements: None.
add(INXObject, View, Point3d) - Method in interface nxopen.SelectINXObjectList: Adds the object with the objects view and objects point
License requirements: None.
add(IParameterizedSurface) - Method in interface nxopen.SelectIParameterizedSurfaceList: Adds an object to the list
License requirements: None.
add(IParameterizedSurface[]) - Method in interface nxopen.SelectIParameterizedSurfaceList: Adds a set of objects to the list
License requirements: None.
add(SelectionMethod) - Method in interface nxopen.SelectIParameterizedSurfaceList: Adds the objects from a SelectionMethod to the list
License requirements: None.
add(IParameterizedSurface, View, Point3d) - Method in interface nxopen.SelectIParameterizedSurfaceList: Adds the object with the objects view and objects point
License requirements: None.
add(NXObject) - Method in interface nxopen.SelectNXObjectList: Adds an object to the list
License requirements: None.
add(NXObject[]) - Method in interface nxopen.SelectNXObjectList: Adds a set of objects to the list
License requirements: None.
add(SelectionMethod) - Method in interface nxopen.SelectNXObjectList: Adds the objects from a SelectionMethod to the list
License requirements: None.
add(NXObject, View, Point3d) - Method in interface nxopen.SelectNXObjectList: Adds the object with the objects view and objects point
License requirements: None.
add(TaggedObject) - Method in interface nxopen.SelectObjectList: Adds an object to the list
License requirements: None.
add(TaggedObject[]) - Method in interface nxopen.SelectObjectList: Adds a set of objects to the list
License requirements: None.
add(SelectionMethod) - Method in interface nxopen.SelectObjectList: Adds the objects from a SelectionMethod to the list
License requirements: None.
add(TaggedObject, View, Point3d) - Method in interface nxopen.SelectObjectList: Adds the object with the objects view and objects point
License requirements: None.
add(Part) - Method in interface nxopen.SelectPartList: Adds an object to the list
License requirements: None.
add(Part[]) - Method in interface nxopen.SelectPartList: Adds a set of objects to the list
License requirements: None.
add(SelectionMethod) - Method in interface nxopen.SelectPartList: Adds the objects from a SelectionMethod to the list
License requirements: None.
add(Part, View, Point3d) - Method in interface nxopen.SelectPartList: Adds the object with the objects view and objects point
License requirements: None.
add(Plane) - Method in interface nxopen.SelectPlaneList: Adds an object to the list
License requirements: None.
add(Plane[]) - Method in interface nxopen.SelectPlaneList: Adds a set of objects to the list
License requirements: None.
add(SelectionMethod) - Method in interface nxopen.SelectPlaneList: Adds the objects from a SelectionMethod to the list
License requirements: None.
add(Plane, View, Point3d) - Method in interface nxopen.SelectPlaneList: Adds the object with the objects view and objects point
License requirements: None.
add(Point) - Method in interface nxopen.SelectPointList: Adds an object to the list
License requirements: None.
add(Point[]) - Method in interface nxopen.SelectPointList: Adds a set of objects to the list
License requirements: None.
add(SelectionMethod) - Method in interface nxopen.SelectPointList: Adds the objects from a SelectionMethod to the list
License requirements: None.
add(Point, View, Point3d) - Method in interface nxopen.SelectPointList: Adds the object with the objects view and objects point
License requirements: None.
add(Spline) - Method in interface nxopen.SelectSplineList: Adds an object to the list
License requirements: None.
add(Spline[]) - Method in interface nxopen.SelectSplineList: Adds a set of objects to the list
License requirements: None.
add(SelectionMethod) - Method in interface nxopen.SelectSplineList: Adds the objects from a SelectionMethod to the list
License requirements: None.
add(Spline, View, Point3d) - Method in interface nxopen.SelectSplineList: Adds the object with the objects view and objects point
License requirements: None.
add(TaggedObject) - Method in interface nxopen.SelectTaggedObjectList: Adds an object to the list
License requirements: None.
add(TaggedObject[]) - Method in interface nxopen.SelectTaggedObjectList: Adds a set of objects to the list
License requirements: None.
add(SelectionMethod) - Method in interface nxopen.SelectTaggedObjectList: Adds the objects from a SelectionMethod to the list
License requirements: None.
add(TaggedObject, View, Point3d) - Method in interface nxopen.SelectTaggedObjectList: Adds the object with the objects view and objects point
License requirements: None.
ADD - Static variable in class nxopen.tooling.AddReusablePart.ModeMethod: Add reusable component
ADD - Static variable in class nxopen.tooling.EWDraftingBuilder.ModeOption: add drawing
ADD - Static variable in class nxopen.tooling.FastenerAssy.HoleOperation: Click the add hole group menu
ADD - Static variable in class nxopen.tooling.FastenerAssy.ModeMethod: Add fastener assembly
ADD - Static variable in class nxopen.tooling.PocketBuilder.ModeType: do unite
ADD - Static variable in class nxopen.tooling.ReusableObjectPasteBuilder.PasteMethods: Add
add(double[], double[]) - Method in interface nxopen.uf.UFVec2: Refer to UF_VEC2_add for documentation.
add(double[], double[]) - Method in interface nxopen.uf.UFVec3: Refer to UF_VEC3_add for documentation.
add(String, NXObject[]) - Method in interface nxopen.Validation: Add a objects to the validation map
License requirements: None.
add(String, String) - Method in interface nxopen.Validation: Add a text to the validation map
License requirements: None.
add(String, double) - Method in interface nxopen.Validation: Add a real to the validation map
License requirements: None.
add(String, int) - Method in interface nxopen.Validation: Add a integer to the validation map
License requirements: None.
add(String, int, int) - Method in interface nxopen.Validation: Add a time to the validation map
License requirements: None.
ADD - Static variable in class nxopen.visualreporting.VisualReportExplorer.ReportOnObjectsOption: Add to the existing set of objects
ADD_BLANK - Static variable in class nxopen.tooling.BlankLayoutBuilder.Types: the type of add multiple blank
ADD_DOF_VALUES - Static variable in class nxopen.cae.ConflictResolutionBuilder.Rule: add dof values on the intersection
ADD_DOF_VALUES - Static variable in class nxopen.cae.ConstraintResolutionBuilder.Rule: Deprecated.

add dof values on the intersection
ADD_INSERT - Static variable in class nxopen.tooling.ShimBuilder.Types
ADD_INSTANCE - Static variable in class nxopen.tooling.StandardPartBuilder.EditType
ADD_INTO_DIAMETERS - Static variable in class nxopen.cam.CutParametersFilletsTypes: Fillets mode: Add into Diameters
ADD_INTO_FACES - Static variable in class nxopen.cam.CutParametersFilletsTypes: Fillets mode: Add into Faces
ADD_INTO_LIST - Static variable in class nxopen.tooling.PiercingInsertBuilder.AssociationToolType: The operation option is add into list
ADD_KINEMATIC_MODEL - Static variable in class nxopen.tooling.MotionSimulationBuilder.Types: Adds kinematic model
ADD_PREFIX - Static variable in class nxopen.InterpartExpressionsBuilder.NamingRules
add_stock_ret_stock(CharacteristicList, CharacteristicList, ISegment[], String) - Method in interface nxopen.routing.StockCollection: Creates stock Stock on the given segments.
ADD_SUFFIX - Static variable in class nxopen.InterpartExpressionsBuilder.NamingRules
ADD_TO_EXISTING - Static variable in class nxopen.cae.PolygonFaceOnMeshBuilder.SelectBodyMethod: Add to existing body
ADD_TO_TOOL_RADIUS - Static variable in class nxopen.cam.TurnConcaveCornerControl.RadiusOptions: Concave Corner Control radius option is Add to Tool Radius.
ADD_WITH_TRANSFORMS - Static variable in class nxopen.preferences.SessionPdm.SynchroniseOnLoadType
addAccessKey(AttributeTemplatesBuilder.AccessKey) - Method in interface nxopen.AttributeTemplatesBuilder: Add a new access key to the list of access keys.
addAcrossObject(DisplayableObject) - Method in interface nxopen.features.shipdesign.StandardPartItemBuilder: Adds the specific object to the across object list.
addActivateHandler(ButtonLayout.Activate, boolean) - Method in interface nxopen.uistyler.ButtonLayout: Registers activate callback.
addActivateHandler(IntegerItem.Activate, boolean) - Method in interface nxopen.uistyler.IntegerItem: Registers activate callback.
addActivateHandler(MultiSelectList.Activate, boolean) - Method in interface nxopen.uistyler.MultiSelectList: Called when a dialog user selects an entry with a double mouse click or presses Return on a selected item.
addActivateHandler(OptionMenu.Activate, boolean) - Method in interface nxopen.uistyler.OptionMenu: Registers activate callback.
addActivateHandler(OptionToggle.Activate, boolean) - Method in interface nxopen.uistyler.OptionToggle: Registers activate callback.
addActivateHandler(PushButton.Activate, boolean) - Method in interface nxopen.uistyler.PushButton: Registers activate callback.
addActivateHandler(RealItem.Activate, boolean) - Method in interface nxopen.uistyler.RealItem: Registers activate callback.
addActivateHandler(SelectionBox.Activate, boolean) - Method in interface nxopen.uistyler.SelectionBox: Registers activate callback.
addActivateHandler(SingleSelectList.Activate, boolean) - Method in interface nxopen.uistyler.SingleSelectList: Registers activate callback.
addActivateHandler(StringItem.Activate, boolean) - Method in interface nxopen.uistyler.StringItem: Registers activate callback.
addActivateHandler(ToolPalette.Activate, boolean) - Method in interface nxopen.uistyler.ToolPalette: Registers activate callback.
addActivateHandler(WideString.Activate, boolean) - Method in interface nxopen.uistyler.WideString: Registers activate callback.
addAdditionalPillarFeature(HeadImpactOPillar) - Method in interface nxopen.features.vehicledesign.HeadImpactBuilder: The method to add an additional pillar feature.
addAdditionalRailFeature(HeadImpactOtherRail) - Method in interface nxopen.features.vehicledesign.HeadImpactBuilder: The method to add an additional side rail feature.
addAdjacentStructure(Body) - Method in interface nxopen.features.shipdesign.PenetrationAssociationBuilder: Adds adjacent structures
License requirements: nx_penetration_mgmt ("Penetration Management")
.
addAdjacentStructure(Body) - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder: Adds adjacent structures
License requirements: nx_penetration_mgmt ("Penetration Management")
.
addAll() - Method in interface nxopen.geometricutilities.ConvertFeatureGroupsToModulesBuilder: Add all feature groups into convertible set
License requirements: None.
addAllChildrenToSubset(Component[]) - Method in interface nxopen.assemblies.Subset: Adds all the child components of the selected Reuse Design Element to the owning subset.
addAllSubordinates() - Method in interface nxopen.assemblies.SubsetBuilder: Returns the value which determines whether the subset will include all the subordinates of reuse design elements.
addApplyHandler(BlockDialog.Apply) - Method in interface nxopen.blockstyler.BlockDialog: Adds Apply callback handler to the dialog.
addApplyHandler(DialogItem.Apply, boolean) - Method in interface nxopen.uistyler.DialogItem: Registers apply callback.
addAssembly(String) - Method in interface nxopen.tooling.CloneObject: Adds the part/assembly to be cloned.
addAssembly(String) - Method in interface nxopen.uf.UFClone: Refer to UF_CLONE_add_assembly for documentation.
addAssertedMassToChosenAttributes(String, int) - Method in interface nxopen.partfamily.TemplateManager: Adds new attribute of type asserted mass to chosen attributes list of a part family
License requirements: adv_assemblies ("ADVANCED ASSEMBLIES"), solid_modeling ("SOLIDS MODELING")
.
addAssociatedObject(NXObject) - Method in interface nxopen.tooling.SpreadsheetData: Add object to be updated according to the spreadsheet data
License requirements: None.
addAssociatedPart(String, ToolingCloneparttype) - Method in interface nxopen.tooling.CloneObject: Adds other part (FEM, SIM part etc.) to be cloned
License requirements: None.
addAssortpartToAnn(Tag, int, Tag[]) - Method in interface nxopen.uf.UFDrf: Refer to UF_DRF_add_assortpart_to_ann for documentation.
addAttachment(IssueAttachment) - Method in interface nxopen.issue.IssueContent: Adds an IssueAttachment
License requirements: nx_issue_mgmt ("NX Issue Tracking")

Created in NX8.5.0
addAttachment(IssueAttachment) - Method in interface nxopen.issue.IssueContentBuilder: Adds an IssueAttachment
License requirements: nx_issue_mgmt ("NX Issue Tracking")

Created in NX8.5.0
addAttachment(IssueAttachment) - Method in interface nxopen.issue.IssueFolder: Adds an IssueAttachment
License requirements: nx_issue_mgmt ("NX Issue Tracking")

Created in NX8.5.0
addAttentionPointHandler(UserDefinedClass.DisplayCallback) - Method in interface nxopen.userdefinedobjects.UserDefinedClass: Registers the attention point callback.
addAttribute(String, CAMAttribute.ValueType) - Method in interface nxopen.cam.CAMAttributeCollection: Add an attribute
License requirements: cam_base ("CAM BASE")
.
addAttributeEditHandler(LinkedPartManager.AttributeEditHandler) - Method in interface nxopen.LinkedPartManager: Registers a user defined attribute edit method that is called whenever a linked mirror part is created or updated from source
License requirements: None.
addAttributeReference(NXObject, String, boolean, int, int) - Method in interface nxopen.annotations.TextWithSymbolsBuilder: Adds an attribute reference
License requirements: drafting ("DRAFTING")
.
addAuxiliaryView(Tag, Tag, Tag, double[]) - Method in interface nxopen.uf.UFDraw: Refer to UF_DRAW_add_auxiliary_view for documentation.
addBackHandler(DialogItem.Back, boolean) - Method in interface nxopen.uistyler.DialogItem: Registers back callback.
addBc(SimBC) - Method in interface nxopen.cae.SimLbcFolder: Add a child folder
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
addBc(SimBC, SimSolution, SimSolutionStep) - Method in interface nxopen.cae.SimSimulation: Adds the boundary condition to the step in the solution passed.
addBc(SimBC) - Method in interface nxopen.cae.SimSolution: Add the bc to the solution Only the BC that not under the folder can be added to solution
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
addBc(SimBC) - Method in interface nxopen.cae.SimSolutionStep: Add the bc to the step Only the BC that not under the folder can be added to solution
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
addBc(SimSolution, SimBC) - Method in interface nxopen.cae.SolutionManager: Add bc to a solution
License requirements: nx_masterfem ("Finite Element Modeling")
.
addBc(SimSolutionStep, SimBC) - Method in interface nxopen.cae.StepManager: Add bc to a step
License requirements: nx_masterfem ("Finite Element Modeling")
.
addBeamStrFillets - Variable in class nxopen.cae.Result.ResultParameters: Deprecated.
addBits(String, int) - Method in interface nxopen.DataContainer: Adds the bits value in the container.
addBoolParameter(String, boolean, boolean, boolean) - Method in interface nxopen.mechatronics.ParameterStockBuilder: Adds Bool parameter.
addBusinessProcessModifier(Tag, String) - Method in interface nxopen.uf.UFPd: Refer to UF_PD_add_business_process_modifier for documentation.
addByUpperDiameter(int, double, double, double, double) - Method in interface nxopen.cam.HolderSectionBuilder: Add a new holder section item by upper diameter
License requirements: cam_base ("CAM BASE")
.
addCadFeatureAttributes() - Method in interface nxopen.cam.FeatureRecognitionBuilder: Returns the flag indicating whether features will get attributes added of enclosed modeling features
License requirements: None.
addCallback(ListBox) - Method in interface nxopen.blockstyler.ListBox.AddCallback: Add callback
License requirements: None.
addCallback(SetList) - Method in interface nxopen.blockstyler.SetList.AddCallback: Add callback
License requirements: None.
addCancelHandler(BlockDialog.Cancel) - Method in interface nxopen.blockstyler.BlockDialog: Adds Cancel callback handler to the dialog.
addCancelHandler(DialogItem.Cancel, boolean) - Method in interface nxopen.uistyler.DialogItem: Registers cancel callback.
addChainBetweenIntersectionPoints(SelectionIntentRule[], NXObject, Point3d, NXObject, Point3d, NXObject, Point3d, Section.Mode, boolean) - Method in interface nxopen.Section: Adds a chain between given two intersection points to the section.
addChainset(ScCollector, String) - Method in interface nxopen.features.EdgeBlendBuilder: Add an edge blend chainset to the edge blend
License requirements: solid_modeling ("SOLIDS MODELING")
.
addChainset(ScCollector, EdgeBlendBuilder.Section, EdgeBlendBuilder.Conic, EdgeBlendBuilder.Rhotype, String, String, String) - Method in interface nxopen.features.EdgeBlendBuilder: Add an edge blend chainset to the edge blend
License requirements: solid_modeling ("SOLIDS MODELING")
.
addChamfer() - Method in interface nxopen.features.CurveFinderBuilder: Adds chamfer relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
addChannel(String) - Method in interface nxopen.sim.KinematicConfigurator: Adds a new user channel name to the list of channels
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
addChannelName(String) - Method in interface nxopen.sim.KinematicComponentBuilder: Adds a channel name to the component
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
addCharacteristicsInheritaceInformation() - Method in interface nxopen.weld.WeldJointBuilder: Add welding characteristics inheritance information.
addCircDetailView(Tag, Tag, Tag, Tag, double, double[]) - Method in interface nxopen.uf.UFDraw: Refer to UF_DRAW_add_circ_detail_view for documentation.
addClonePartName(String) - Method in interface nxopen.tooling.AddReusablePart: Adds clone part name
License requirements: None.
addCloseHandler(BlockDialog.Close) - Method in interface nxopen.blockstyler.BlockDialog: Adds Close callback handler to the dialog.
addCoincident() - Method in interface nxopen.features.CurveFinderBuilder: Adds coincident vertex relations of the last vertexes added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
addColumn(Tag, Tag, int) - Method in interface nxopen.uf.UFTabnot: Refer to UF_TABNOT_add_column for documentation.
addComponent(String, String, String, Point3d, Matrix3x3, int) - Method in interface nxopen.assemblies.ComponentAssembly: Creates a new Component in this assembly, based on an existing part file.
addComponent(String, String, String, Point3d, Matrix3x3, int, boolean) - Method in interface nxopen.assemblies.ComponentAssembly: Creates a new Component in this assembly, based on an existing part file.
addComponent(BasePart, String, String, Point3d, Matrix3x3, int) - Method in interface nxopen.assemblies.ComponentAssembly: Creates a new Component in this assembly, based on an existing part file.
addComponent(Component[]) - Method in interface nxopen.mechatronics.SystemObject: Adds Assemblies.Component .
addComponent(String) - Method in interface nxopen.pdm.PendingComponentsManager: Adds a pending component.
AddComponentBuilder - Interface in nxopen.mechatronics: Represents a AddComponentBuilder
To create a new instance of this class, use FunctionObjectCollection.createAddComponentBuilder()

Created in NX7.5.1
AddComponentData() - Constructor for class nxopen.assemblies.ComponentAssembly.AddComponentData
AddComponentData() - Constructor for class nxopen.pdm.PendingComponentsManager.AddComponentData
addComponentMode(AddReusablePart.ModeMethod) - Method in interface nxopen.tooling.AddReusablePart: Adds mode for a reusable component
License requirements: None.
addComponentProperty(String, String, int) - Method in interface nxopen.tooling.AddReusablePart: Adds Component Properties
License requirements: None.
addComponents() - Method in interface nxopen.ObjectGeneralPropertiesBuilder: Returns the add components.
addComponentsExclusively() - Method in interface nxopen.tooling.ChangeoverManagementBuilder: Returns the exclusive adding
License requirements: None.
addCompoundWeldSymbol(Tag, UFDrf.WeldSymInfo, UFDrf.WeldSymInfo) - Method in interface nxopen.uf.UFDrf: Refer to UF_DRF_add_compound_weld_symbol for documentation.
addCompSheet(NXObject, String, String, String, String) - Method in interface nxopen.tooling.CompDrawingBuilder: Add a new sheet to a component.
addConcentric() - Method in interface nxopen.features.CurveFinderBuilder: Adds concentric relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
addConditionList(GanttOperationConditionBuilder[]) - Method in interface nxopen.mechatronics.GanttOperationBuilder: Sets the condition data
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
addConics(Tag, int, Tag[]) - Method in interface nxopen.uf.UFSket: Refer to UF_SKET_add_conics for documentation.
addConlinear() - Method in interface nxopen.features.CurveFinderBuilder: Adds conlinear relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
addConnectedByElements() - Method in interface nxopen.assemblies.Subset: Add Elements to a subset that reference the existing Design Elements in it by a Connection relation.
addConnectedPartsInBuilder() - Method in interface nxopen.routing.TransformPathBuilder: Add object in transform object list of builder as per list updated by Routing.TransformPathBuilder#updateConnectedPartList
License requirements: routing_base ("Routing Basic")

Created in NX8.0.0
addConstraint(Constraint) - Method in interface nxopen.positioning.Network: Add a Constraint to the network.
addConstructHandler(DialogItem.Construct, boolean) - Method in interface nxopen.uistyler.DialogItem: Registers construct callback.
addContactPreventionConstraint(CfdContactPreventionConstraint) - Method in interface nxopen.cae.FluidDomainRecipe: Adds a CfdContactPreventionConstraint constraint
License requirements: nx_adv_fluid_mod ("NX Advanced Fluid Modeling")

Created in NX9.0.0
addControllingExp(Tag, Tag) - Method in interface nxopen.uf.UFDrf: Refer to UF_DRF_add_controlling_exp for documentation.
addCopyHandler(UserDefinedFeatureClass.CopyCallback) - Method in interface nxopen.features.UserDefinedFeatureClass: Registers the copy callback.
addCosmeticEnd() - Method in interface nxopen.weld.FilletBuilder: Returns the value identify if a cosmtic end should be added to each end of the fillet.
addCreateHandler(UserDefinedFeatureClass.CreateCallback) - Method in interface nxopen.features.UserDefinedFeatureClass: Registers the create callback.
addCurve(Curve) - Method in interface nxopen.geometricutilities.CurveShapingBuilder: Adds a curve for shaping
License requirements: studio_free_form ("STUDIO FREE FORM")
.
addCurveSenseToMap(NXObject, int) - Method in interface nxopen.features.OffsetMoveCurveBuilder: This function add the selected curve and its sense into the curve_sense_map when select a new curve
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
addCustomPopupMenuCallback() - Method in interface nxopen.CustomPopupMenuHandler.AddCustomPopupMenuCallback: This callback will be invoked by NX application when a RMB click is performed on NX Tc Navigator application.
addCutObject(DisplayableObject) - Method in interface nxopen.DraftingManager: Identify object to be drawn as Cut in Drafting
License requirements: None.
addCutSegment(Point) - Method in interface nxopen.drawings.SectionLineSegmentPointListBuilder: Creates a new SectionLineSegmentPointBuilder object
License requirements: None.
addCutSegment(Point, SectionLineSegmentPointBuilder) - Method in interface nxopen.drawings.SectionLineSegmentPointListBuilder: Creates a new SectionLineSegmentPointBuilder In case of point to point section line ,new segment is added at location prior to reference cut segment specified.
AddData() - Constructor for class nxopen.cam.MillingTrackpointBuilder.AddData
addDatumIconHandler(CustomManager.DatumIconHandler) - Method in interface nxopen.weld.CustomManager: Registers a user defined method to be notified when the part navigator is updating the surface or pin datum icon.
addDatumIdentifier(Tag, UFGdt.DatumIdentifier) - Method in interface nxopen.uf.UFGdt: Refer to UF_GDT_add_datum_identifier for documentation.
addDatumPlanes(DatumPlane[]) - Method in interface nxopen.display.PlanarShipGrid: Adds intersected datum planes into the planar grid.
addDatumToFeature(Tag, Tag) - Method in interface nxopen.uf.UFGdt: Refer to UF_GDT_add_datum_to_feature for documentation.
addDefiningPointAtAbsoluteCoords(Point3d) - Method in interface nxopen.routing.SplinePathBuilder: Adds a defining point to the spline.
addDefiningPointToSpline(Point, boolean) - Method in interface nxopen.routing.SplinePathBuilder: Adds a defining point to the current spline or creates the first point of the new spline.
addDeleteHandler(UserDefinedClass.LinkCallback) - Method in interface nxopen.userdefinedobjects.UserDefinedClass: Registers the delete callback.
addDeselectedAcrossObject(DisplayableObject) - Method in interface nxopen.features.shipdesign.StandardPartItemBuilder: Adds the specific object to the deselected across object list.
addDestructHandler(DialogItem.Destruct, boolean) - Method in interface nxopen.uistyler.DialogItem: Registers destruct callback.
addDetailView(Tag, Tag, double[], double[], double, double[]) - Method in interface nxopen.uf.UFDraw: Refer to UF_DRAW_add_detail_view for documentation.
addDialogShownHandler(BlockDialog.DialogShown) - Method in interface nxopen.blockstyler.BlockDialog: Adds Dialog Shown callback handler to the dialog.
addDieInsertPart() - Method in interface nxopen.tooling.PiercingInsertBuilder: Add user defined die insert or backing insert part.
addDimension(DimensionData, Point3d, boolean) - Method in interface nxopen.annotations.DimensionSet: Adds a dimension to the set
License requirements: drafting ("DRAFTING")
.
addDisplayHandler(UserDefinedClass.DisplayCallback) - Method in interface nxopen.userdefinedobjects.UserDefinedClass: Registers UDO display callback.
addDivideEvent(int) - Method in interface nxopen.cam.ToolPathDivideBuilder: Add a new divide event to the list
License requirements: None.
addDivisionsBuilderToList(Port) - Method in interface nxopen.routing.SplitDuctBuilder: Creates divisions builders for all the divisions, if any, associated with the cross-section to which the input port belongs and adds them to the list of divisions.
addDouble(String, double) - Method in interface nxopen.DataContainer: Adds the double value in the container.
addDoubleClickHandler(MultiSelectList.DoubleClick, boolean) - Method in interface nxopen.uistyler.MultiSelectList: Registers double click callback.
addDoubleClickHandler(SelectionBox.DoubleClick, boolean) - Method in interface nxopen.uistyler.SelectionBox: Registers double click callback.
addDoubleClickHandler(SingleSelectList.DoubleClick, boolean) - Method in interface nxopen.uistyler.SingleSelectList: Registers double click callback.
addDoubleMatrix(String, int, int, double[]) - Method in interface nxopen.DataContainer: Adds the double matrix in the container.
addDoubleVector(String, double[]) - Method in interface nxopen.DataContainer: Adds the double vector in the container.
addDraftPoints(DraftPointData[]) - Method in interface nxopen.geometricutilities.DraftVariableAngleData: Adds DraftPointData objects
License requirements: solid_modeling ("SOLIDS MODELING")

Created in NX4.0.0
addDragHandler(IntegerScale.Drag, boolean) - Method in interface nxopen.uistyler.IntegerScale: Registers drag callback.
addDragHandler(RealScale.Drag, boolean) - Method in interface nxopen.uistyler.RealScale: Registers dtag callback.
addDrawingAutomationWizardHandler(DrawingUtils.DrawingAutomationWizardHandler) - Method in interface nxopen.DrawingUtils: Registers a user defined method that is called whenever Booklet Wizard is committed.
addDynamicPoints() - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder: Adds dynamic points to the Deviation Gauge.
addDynamicPoints() - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder: Adds dynamic points to the draft analysis object
License requirements: studio_analyze ("STUDIO ANALYZE")
.
ADDED - Static variable in class nxopen.mechatronics.ComparisonResultElectricalPart.Status: Added status
ADDED - Static variable in class nxopen.weld.AutoPointBuilder.InterferenceDetails: Indicates weld points exist and parts were added.
ADDED_BOTTOM_GEOMETRY - Static variable in class nxopen.preferences.PartFlexiblePrintedCircuitDesign.FlatPatternObjectType
ADDED_BOTTOM_GEOMETRY - Static variable in class nxopen.preferences.PartSheetmetal.FlatPatternObjectType
ADDED_BOTTOM_GEOMETRY - Static variable in class nxopen.sheetmetal.FlatPatternSettings.FlatPatternObjectType
ADDED_TOP_GEOMETRY - Static variable in class nxopen.preferences.PartFlexiblePrintedCircuitDesign.FlatPatternObjectType
ADDED_TOP_GEOMETRY - Static variable in class nxopen.preferences.PartSheetmetal.FlatPatternObjectType
ADDED_TOP_GEOMETRY - Static variable in class nxopen.sheetmetal.FlatPatternSettings.FlatPatternObjectType
addedBottom() - Method in interface nxopen.features.sheetmetal.ExportFlatPatternBuilder: Returns the added bottom geometry output flag
License requirements: None.
addedGeometry() - Method in interface nxopen.features.sheetmetal.FlatPatternBuilder: Returns the added geometry selection
License requirements: None.
addedGeometry() - Method in interface nxopen.features.sheetmetal.FlatSolidBuilder: Returns the added geometry selection
License requirements: None.
addedGeometry() - Method in interface nxopen.features.sheetmetal.UnbendBuilder: Returns the added geometry selection
License requirements: None.
addEditHandler(UserDefinedFeatureClass.EditCallback) - Method in interface nxopen.features.UserDefinedFeatureClass: Registers the edit callback.
addEditHandler(UserDefinedClass.GenericCallback) - Method in interface nxopen.userdefinedobjects.UserDefinedClass: Registers the edit callback.
addedTop() - Method in interface nxopen.features.sheetmetal.ExportFlatPatternBuilder: Returns the added top geometry output flag
License requirements: None.
addElement(FENode[]) - Method in interface nxopen.cae.MultipleElementCreateBuilder: Adds new element definition defined by the list of input nxopen.cae.FENode objects.
addElement(FENode[], int) - Method in interface nxopen.cae.MultipleElementCreateBuilder: Adds new element definition defined by the list of input nxopen.cae.FENode objects.
addElement(NXObject, CamProfileBuilder.Element) - Method in interface nxopen.mechatronics.CamProfileBuilder: Add element to builder.
addElement(NXObject, String, double, double, double, double, double, double, boolean, boolean, boolean) - Method in interface nxopen.mechatronics.MotionProfileBuilder: Add element to builder.
addEnableOKButtonHandler(BlockDialog.EnableOKButton) - Method in interface nxopen.blockstyler.BlockDialog: Adds enable-ok-button callback handler to the dialog.
addEndExtensions(double, double) - Method in interface nxopen.annotations.CenterlineBuilder: Adds extensions only at ends
License requirements: drafting ("DRAFTING")
.
addEndPointsSwitch() - Method in interface nxopen.die.SteelInsertSegmentParentBuilder: Returns the add end points switch
License requirements: ug_die_design ("Die Design")
.
addendum() - Method in interface nxopen.die.TrimLineDevelopmentBuilder: Returns the collection of addendum faces
License requirements: None.
AddendumSection - Interface in nxopen.features: Represents an Addendum Section feature
To create or edit an instance of this class, use AddendumSectionBuilder

Created in NX7.5.0
AddendumSectionBuilder - Interface in nxopen.die: Represents a AddendumSectionBuilder which is used to create or edit an addendum section.
AddendumSectionBuilder.SectionLocationType - Class in nxopen.die: The settings indicating the location of the section being created.
AddendumSectionBuilder.SectionOrientationType - Class in nxopen.die: The settings to indicate the section orientation.
AddendumSectionBuilder.SectionShapeType - Class in nxopen.die: The settings to indicate the section shape.
AddendumSectionBuilder.SegmentParameterType - Class in nxopen.die: The settings to indicate which parameter of the segment to lock.
AddendumSectionBuilder.SegmentType - Class in nxopen.die: The settings to indicate the segment type to update.
AddendumSectionBuilder.SurfaceBuildType - Class in nxopen.die: The settings to indicate the surface type.
AddendumSectionUserDefinedBuilder - Interface in nxopen.die: Represents a AddendumSectionUserDefinedBuilder builder used to select a previously defined section or a string of objects to define the section shape.
AddendumSurface - Interface in nxopen.features: Represents an Addendum Surface feature
To create or edit an instance of this class, use AddSurfBuilder

Created in NX6.0.0
addEntities(SetObject[]) - Method in interface nxopen.cae.LaminateSelectEntitiesBuilder: Add entities to the selection objects
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
addEntities(NXObject[]) - Method in interface nxopen.features.ChangeShellThicknessBuilder: Adds entities which have same wall thickness value as the selected face
License requirements: None.
addEntities(Tag, int, Tag[]) - Method in interface nxopen.uf.UFPlist: Deprecated.
The equivalent Open C method has retired
addEnum(String, String[]) - Method in interface nxopen.DataContainer: Adds the enum members in the container.
addEqualRadius() - Method in interface nxopen.features.CurveFinderBuilder: Adds equal radius relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
addException(boolean, DisplayableObject, DisplayableObject, String) - Method in interface nxopen.assemblies.ClearanceAnalysisBuilder: Add an exception.
addExistingCurves(DisplayableObject[]) - Method in interface nxopen.layout2d.Component: Add an array of specified curves from top level sketch to this component
License requirements: nx_layout ("NX Layout")
.
addExistingFunction(SystemObject, String, String) - Method in interface nxopen.mechatronics.MechatronicsManager: Adds existing function as children of specified object.
addExistingLogical(SystemObject, String, String) - Method in interface nxopen.mechatronics.MechatronicsManager: Adds existing logical as children of specified object.
addExistingRequirement(SystemObject, String, String) - Method in interface nxopen.mechatronics.MechatronicsManager: Adds existing requirement as children of specified object.
addExpressionReference(String, String, int, int) - Method in interface nxopen.annotations.TextWithSymbolsBuilder: Adds an expression reference
License requirements: drafting ("DRAFTING")
.
addExtension(int, double) - Method in interface nxopen.annotations.CenterlineBuilder: Adds extension based on select object index
License requirements: drafting ("DRAFTING")
.
addExtractedObjects(Tag, int, Tag[], int) - Method in interface nxopen.uf.UFSket: Refer to UF_SKET_add_extracted_objects for documentation.
AddExtractedObjectsData() - Constructor for class nxopen.uf.UFSket.AddExtractedObjectsData
addFace(QuickBinderBuilder.Types) - Method in interface nxopen.die.QuickBinderBuilder: Add a component face to the binder body.
addFacePair(Face, Face) - Method in interface nxopen.features.sheetmetal.ClosedCornerBuilder: Add a face pair.
addFacePair(Face, Face) - Method in interface nxopen.features.sheetmetal.EditCornerBuilder: Add a face pair.
addFacePair(Face, Face) - Method in interface nxopen.features.sheetmetal.ThreeBendCornerBuilder: Input a bend face pair for the three bend corner feature.
addFaceSets(FaceSetOffset[]) - Method in interface nxopen.features.OffsetSurfaceBuilder: Deprecated.
Deprecated in NX5.0.0. Use OffsetSurfaceBuilder.faceSets() instead.
addFacesOcfData(Tag, UFCurve.OcfData) - Method in interface nxopen.uf.UFCurve: Refer to UF_CURVE_add_faces_ocf_data for documentation.
addFacetToModel(Tag, int, double[][], double[][], int[]) - Method in interface nxopen.uf.UFFacet: Refer to UF_FACET_add_facet_to_model for documentation.
addFeatureGroupIntoConvertibleSet(nxopen.features.FeatureGroup[]) - Method in interface nxopen.geometricutilities.ConvertFeatureGroupsToModulesBuilder: Add feature group into convertible set
License requirements: None.
addFeatureSet(nxopen.cam.CAMFeature, String) - Method in interface nxopen.cam.fbm.FeatureGeometry: Creates a feature geometry set
License requirements: cam_base ("CAM BASE")
.
addFeatureType(String) - Method in interface nxopen.features.shipdesign.FeaturesBatchOperationBuilder: Add feature type
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
addField(String) - Method in interface nxopen.features.UserDefinedFeatureApplicationData: Adds named field.
addField(Field) - Method in interface nxopen.fields.ExportData: Add a field
License requirements: None.
addFieldDescription(PdmSearch, PdmSoaqueryNxmgrfielddatatype, String, String, String, String, String, ListOfValues) - Method in interface nxopen.pdm.SoaQuery: Deprecated.
Deprecated in NX8.0.0. It's not needed in any context of search based on queries.
addFields(Field[]) - Method in interface nxopen.fields.ExportData: Add a field
License requirements: None.
addFile(String) - Method in interface nxopen.annotations.ImportAutocadBlockBuilder: Adds a file to import list
License requirements: nx_layout ("NX Layout")
.
addFile(String, String) - Method in interface nxopen.DataContainer: Adds the value in the container.
addFile(String, String) - Method in interface nxopen.pdm.CAEFileContainer: Add a file to the list of files in the file container class CAEFileContainer .
addFileOperationHandler(DialogItem.FileOperation, boolean) - Method in interface nxopen.uistyler.DialogItem: Registers file operation callback.
addfillets() - Method in interface nxopen.cae.ResultVariable: Returns the Beam fillets
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
addFilter(int) - Method in interface nxopen.blockstyler.SelectObject: Adds the filters for select object block
License requirements: None.
addFilter(int, int, int) - Method in interface nxopen.blockstyler.SelectObject: Adds the filter for select object block using type, subtype and solidBodyType
License requirements: None.
addFilterHandler(BlockDialog.Filter) - Method in interface nxopen.blockstyler.BlockDialog: Adds Filter callback handler to the dialog.
addFitHandler(UserDefinedClass.DisplayCallback) - Method in interface nxopen.userdefinedobjects.UserDefinedClass: Registers the fit callback.
addFittingPoints(Point) - Method in interface nxopen.tooling.CoolingFittingData: Add cooling fitting points to the fitting data.
addfixconstraint - Variable in class nxopen.routing.SubdivideSegmentBuilder.SplineSettingValuesData: Adds a fix constraint at newly created subdivision locations
addFocusNotifyHandler(BlockDialog.FocusNotify) - Method in interface nxopen.blockstyler.BlockDialog: Adds focus notify callback handler to the dialog.
addFolder(String) - Method in interface nxopen.annotations.ImportAutocadBlockBuilder: Adds a folder to import list
License requirements: nx_layout ("NX Layout")
.
addFolder(SimLbcFolder) - Method in interface nxopen.cae.SimSolution: Add the folder to the solution Only the folder not under other folder can be added to solution.
addFolder(SimLbcFolder) - Method in interface nxopen.cae.SimSolutionStep: Add the folder to the solution Only the folder not under other folder can be added to solution.
addFolder(SimSolution, SimLbcFolder) - Method in interface nxopen.cae.SolutionManager: Add bc folder to a solution
License requirements: nx_masterfem ("Finite Element Modeling")
.
addFolder(SimSolutionStep, SimLbcFolder) - Method in interface nxopen.cae.StepManager: Add bc folder to a step
License requirements: nx_masterfem ("Finite Element Modeling")
.
addFolderObjects(PMNavFolderObject[]) - Method in interface nxopen.mechatronics.PMNavFolderLocator: Add folder objects
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
addFont(String) - Method in interface nxopen.FontCollection: Adds a font to the part.
addFont(String, FontCollection.Type) - Method in interface nxopen.FontCollection: Adds a font to the part.
addFont(Tag, String) - Method in interface nxopen.uf.UFUgfont: Refer to UF_UGFONT_add_font for documentation.
AddFontBuilder - Interface in nxopen.routing: Builder for creating an add font user interface dialogue
To obtain an instance of this class use AddFontBuilder

Created in NX8.5.0
addFromDataFileAttributeList() - Method in interface nxopen.tooling.ObjectAttributeManagementBuilder: The action to add selected attributes from attributes spreadsheet
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
addFromSpreadsheetAttributeList() - Method in interface nxopen.tooling.GeneralInsertBuilder: Move attribute from Attribute from Spreadsheet to Attribute of Object
License requirements: None.
addGeometry(NXObject) - Method in interface nxopen.sim.KinematicComponentBuilder: Adds a single geometry element
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder") OR resource_manager_nx ("Teamcenter Resource Manager")
.
addGeometry(DisplayableObject, Sketch.InferConstraintsOption) - Method in interface nxopen.Sketch: Adds a curve or point to the sketch
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.
addGeometry(DisplayableObject) - Method in interface nxopen.Sketch: Adds a curve or point to the sketch.
addGeometry(Curve, Sketch.InferConstraintsOption, Sketch.AddEllipseOption) - Method in interface nxopen.Sketch: Adds a curve or point to a sketch.
addGeometry(Sketch.InferConstraintsOption, Sketch.AddEllipseOption, SmartObject[]) - Method in interface nxopen.Sketch: Adds an array of curves or points to a sketch.
addGlobalBc(SimBC) - Method in interface nxopen.cae.StepManager: Add bc to global bc group in solution
License requirements: nx_masterfem ("Finite Element Modeling")
.
addGlobalFolder(SimLbcFolder) - Method in interface nxopen.cae.StepManager: Add bc folder to global bc group in solution
License requirements: nx_masterfem ("Finite Element Modeling")
.
addGlobalLayup(LaminateGlobalLayup) - Method in interface nxopen.cae.LaminateRelabelPliesBuilder: Adds a layup to the list of layups that will have their plies relabeled.
addGlobalLoadset(SimLoadSet) - Method in interface nxopen.cae.StepManager: Add loadset to global bc group in solution
License requirements: nx_masterfem ("Finite Element Modeling")
.
addHandShapeLib(String) - Method in interface nxopen.features.HumanBuilder: Add hand shape library
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
addHeaderRow(Tag, Tag, int) - Method in interface nxopen.uf.UFTabnot: Refer to UF_TABNOT_add_header_row for documentation.
addHoldingSystem(String) - Method in interface nxopen.sim.KinematicComponentBuilder: Adds a holding system to the component
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
addHoldingSystem(String) - Method in interface nxopen.sim.KinematicConfigurator: Adds a new user holding system to the list of holding systems
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
addHoleInstance(Point3d, Point3d) - Method in interface nxopen.tooling.AddReusablePart: Adds series of reusable components in holes
License requirements: None.
addHolesData(Edge[], Face[]) - Method in interface nxopen.tooling.RemoveHolesBuilder: Add the hole data
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
addIconHandler(UserDefinedFeatureClass.IconCallback) - Method in interface nxopen.features.UserDefinedFeatureClass: Registers the udf icon callback.
addIndex() - Method in interface nxopen.ObjectGeneralPropertiesBuilder: Returns the add index.
addIndexTextTitle(UFSfLegend.Attr) - Method in interface nxopen.uf.UFSfLegend: Refer to UF_SF_LEGEND_add_index_text_title for documentation.
addInformationHandler(UserDefinedClass.GenericCallback) - Method in interface nxopen.userdefinedobjects.UserDefinedClass: Registers the information callback.
addInitializeCallback(PartOperationImportObserver.InitializeCb) - Method in interface nxopen.pdm.PartOperationImportObserver: Registers a user defined Initialize callback that is called during initialization of import builder
License requirements: None.
addInitializeHandler(BlockDialog.Initialize) - Method in interface nxopen.blockstyler.BlockDialog: Adds Initialize callback handler to the dialog.
addInsertComponent() - Method in interface nxopen.tooling.BendInsertDesignBuilder: Add the new bend insert component
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
addInstance(int, int) - Method in interface nxopen.geometricutilities.PatternClockingBuilder: Adds an instance that will get this clocking
License requirements: None.
addInstanceDefinition(String, InstanceDefinition, String) - Method in interface nxopen.partfamily.TemplateManager: Creates a new family member definition with the supplied name and places it just under previous family member definition.
addInstanceDefinitionUsingMemberIdentifier(MemberIdentifier, InstanceDefinition, String) - Method in interface nxopen.partfamily.TemplateManager: Creates a new family member definition with the supplied member identifier places it just under previous family member definition.
addInteger(String, int) - Method in interface nxopen.DataContainer: Adds the integer value in the container.
addIntegerMatrix(String, int, int, int[]) - Method in interface nxopen.DataContainer: Adds the integer matrix in the container.
addIntegerVector(String, int[]) - Method in interface nxopen.DataContainer: Adds the integer vector in the container.
addInterpartParents() - Method in interface nxopen.assemblies.Subset: Add sources of interpart relationships (wave links in the subset and Connected To relationships for design features) that are not in the specified subset to the subset recipe.
addIntParameter(String, int, boolean, boolean) - Method in interface nxopen.mechatronics.ParameterStockBuilder: Adds Int parameter.
addIssue(IssueContent) - Method in interface nxopen.issue.IssueBriefcase: Adds an IssueContent from an existing IssueContent .
addItemToDisplay(Tag) - Method in interface nxopen.uf.UFDisp: Refer to UF_DISP_add_item_to_display for documentation.
addIteration(int) - Method in interface nxopen.cae.DurabilityResultPathBuilder: Adds an iteration.
ADDITIONAL_DIE - Static variable in class nxopen.tooling.QuickQuotationBuilder.DesignTypes: The design is a additional die
ADDITIONAL_LENGTH - Static variable in class nxopen.routing.SplinePathBuilder.SplinePathSlackType: A interpolating (By-Poles) spline.
additionalboltlength - Variable in class nxopen.routing.ReuseLibrary.SpecificationsGetGeneralConnectionOptionsData: Additional length for bolts.
additionalCommands() - Method in interface nxopen.cam.TurningOperationBuilder: Returns the Additional Commands
License requirements: None.
additionalCurves - Variable in class nxopen.uf.UFSmd.AskFpAddCurvesData
additionalFacesToConvert() - Method in interface nxopen.features.sheetmetal.ConvertToSheetmetalBuilder: Returns the additional faces to convert
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
additionalFrequenciesBreakPoints() - Method in interface nxopen.cae.LaminateSineEventBuilder: Returns the option to consider break points
License requirements: None.
additionalFrequenciesUnits() - Method in interface nxopen.cae.LaminateSineEventBuilder: Returns the option to consider break points
License requirements: None.
additionalPasses() - Method in interface nxopen.cam.PlanarOperationBuilder: Returns the Boundary Additional Passes
License requirements: None.
additionalPasses() - Method in interface nxopen.cam.StepoverBuilder: Returns the number of additional passes
License requirements: None.
additionalPlanesPerFrame() - Method in interface nxopen.features.shipdesign.ShellExpansionBuilder: Returns the additional planes per frame
License requirements: None.
additionalProfiling() - Method in interface nxopen.cam.TurnCutParameters: Returns the additional profiling
License requirements: None.
additionalReferences() - Method in interface nxopen.weld.DatumCommonBuilder: Returns the additional references.
additionalStructures() - Method in interface nxopen.features.shipdesign.PinJigBuilder: Returns the additional structures connected to the plates.
additionalStructures() - Method in interface nxopen.features.shipdesign.SectionViewBuilder: Returns the additional structures to be sectioned.
additionalstudlength - Variable in class nxopen.routing.ReuseLibrary.SpecificationsGetGeneralConnectionOptionsData: Additional length for studs
addJobToPlotLayout(Tag, UFPlot.JobOptions, String, UFPlot.Units, double[], UFPlot.Rotation, double) - Method in interface nxopen.uf.UFPlot: Refer to UF_PLOT_add_job_to_plot_layout for documentation.
addKeyboardFocusNotifyHandler(BlockDialog.KeyboardFocusNotify) - Method in interface nxopen.blockstyler.BlockDialog: Adds keyboard focus notify callback handler to the dialog.
addLeader(LeaderBundle) - Method in interface nxopen.annotations.BaseCustomSymbol: Adds leaders to the custom symbol.
addLeader(Tag, UFGdt.LeaderSpec) - Method in interface nxopen.uf.UFGdt: Refer to UF_GDT_add_leader for documentation.
addLevelsUsingGeom(Tag, int, Tag, double) - Method in interface nxopen.uf.UFCutLevels: Refer to UF_CUT_LEVELS_add_levels_using_geom for documentation.
addLevelsUsingZ(Tag, int, double, double) - Method in interface nxopen.uf.UFCutLevels: Refer to UF_CUT_LEVELS_add_levels_using_z for documentation.
addLineToSetOfAllEditedSegments() - Method in interface nxopen.routing.EditLineSegmentBuilder: Adds the current line segment to the set of all line segments that have been edited by the user.
addListParameter(String, String[], ParameterStockBuilder.Assignment, boolean, boolean) - Method in interface nxopen.mechatronics.ParameterStockBuilder: Adds List parameter.
addLoadcase(int) - Method in interface nxopen.cae.DurabilityResultPathBuilder: Adds a loadcase.
addLoadCases(TBSLoadCase[]) - Method in interface nxopen.cae.optimization.TBSLoadCaseManager: Adds the load cases
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
addLoading(BaseDataLoadingBuilder) - Method in interface nxopen.features.vehicledesign.BaseDataBuilder: Adds a loading, which represents BaseDataLoadingBuilder , to the base data.
addLoadset(SimSolution, SimLoadSet) - Method in interface nxopen.cae.SolutionManager: Add loadset to a solution
License requirements: nx_masterfem ("Finite Element Modeling")
.
addLoadset(SimSolutionStep, SimLoadSet) - Method in interface nxopen.cae.StepManager: Add loadset to a step
License requirements: nx_masterfem ("Finite Element Modeling")
.
addLocalResolutionConstraint(CfdLocalResolutionConstraint) - Method in interface nxopen.cae.FluidDomainRecipe: Adds a CfdLocalResolutionConstraint constraint
License requirements: nx_adv_fluid_mod ("NX Advanced Fluid Modeling")

Created in NX9.0.0
addLogical(String, boolean) - Method in interface nxopen.DataContainer: Adds the logical value in the container.
addManualPair(int, int) - Method in interface nxopen.cae.CorrelModePairingBuilder: Add a manually paired mode pair
License requirements: nx_correl_base ("FE Correlation")
.
addMapEntityHandler(LinkedPartManager.MapEntityHandler) - Method in interface nxopen.LinkedPartManager: Registers a user defined map entity method that is called whenever a linked mirror part is created or updated from source
License requirements: None.
addMargin(OrdinateOriginDimension, OrdinateMargin, double) - Method in interface nxopen.annotations.OrdinateMarginCollection: Adds an ordinate margin object
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
addMasterComponentPart() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder: Returns the option to specify whether or not the master component part will be added.
addMasterPart(String) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder: Add the master part to the work part as one component by the given part name.
addMasterPart(Part) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder: Add the master part to the work part as one component by the given part object.
addMasterPartComponent(String, String, String, Point3d, Matrix3x3, int) - Method in interface nxopen.assemblies.ComponentAssembly: Creates a new Component in this assembly as master part.
addMasterPartComponent(Part, String, String, Point3d, Matrix3x3, int) - Method in interface nxopen.assemblies.ComponentAssembly: Creates a new Component in this assembly as master part.
addMember(PartFamilyMemberValues) - Method in interface nxopen.PartFamilyManager: Deprecated.
Deprecated in NX9.0.0. Use TemplateManager.addInstanceDefinition(java.lang.String, nxopen.partfamily.InstanceDefinition, java.lang.String) instead
addMember(Tag, UFFam.MemberData) - Method in interface nxopen.uf.UFFam: Refer to UF_FAM_add_member for documentation.
addMemberFolders(SimLbcFolder[]) - Method in interface nxopen.cae.SimLoadSet: Add root folder members to load set.
addMemberItems(TaggedObject) - Method in interface nxopen.routing.DefineRunBuilder: Append a member item to the list in the builder for DefineRun
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
addMemberLoads(SimLoad[]) - Method in interface nxopen.cae.SimLoadSet: Add load members to load set.
addMemberSet(SimLoadSet) - Method in interface nxopen.cae.SimLoadSet: Add a load set member to load set.
addMenu(int, String) - Method in interface nxopen.CustomPopupMenu: Adds and returns a menu to this menu
License requirements: None.
addMenu(int, String) - Method in interface nxopen.CustomPopupMenuHandler: Adds and returns a menu to the COTS (Commercial, off-the-shelf) RMB menu
License requirements: None.
addMenuAction(String, MenuBarManager.ActionCallback) - Method in interface nxopen.menubar.MenuBarManager: Adds the action callback.
addMenuButton(MenuButton, int) - Method in interface nxopen.menubar.ContextMenu: Adds a menu bar button to the context menu.
addMenuItem(int, String) - Method in interface nxopen.blockstyler.TreeListMenu: Adds single menu item
License requirements: None.
addMenuItem(int, String, String) - Method in interface nxopen.blockstyler.TreeListMenu: Adds single menu item
License requirements: None.
addMenuItem(int, String) - Method in interface nxopen.CustomPopupMenu: Adds and returns a menu item to this menu
License requirements: None.
addMenuItem(int, String) - Method in interface nxopen.CustomPopupMenuHandler: Adds and returns a menu item to the COTS (Commercial, off-the-shelf) RMB menu
License requirements: None.
addMenuLabel(String, int) - Method in interface nxopen.menubar.ContextMenu: Adds a label to the context menu.
addMenuSeparator() - Method in interface nxopen.CustomPopupMenu: Adds a separator in the submenu
License requirements: None.
addMenuSeparator() - Method in interface nxopen.CustomPopupMenuHandler: Adds a separator to the COTS (Commercial, off-the-shelf) RMB menu
License requirements: None.
addModifyFeatureHandler(CustomManager.ModifyFeatureHandler) - Method in interface nxopen.weld.CustomManager: Registers a user defined method to be notified when weld features are created or edited.
addMovableObject(NXObject) - Method in interface nxopen.positioning.Network: Add a movable object to the network.
addMultipleVariantRules(String[], String[]) - Method in interface nxopen.pdm.VariantConfigurationBuilder: Adds given variant rules in case of multiple variant rules to VariantConfigurationBuilder The input contextIds comprising of multifield key and itemRev_id: In case of default domain: contextId should contain Teamcenter item ID.
addNewChildrenToSubset() - Method in interface nxopen.assemblies.Subset: If the Reuse Design Elements in the subset contain any new components which were not added to the subset because its owning workset was not the displayed part at the time of creation, then add those new components to the subset now.
addNewFeatureType(String, String) - Method in interface nxopen.cam.FeatureTeaching: Adds a new feature type
License requirements: fbm_author ("FBM Author")
.
addNewInstance(Component, int) - Method in interface nxopen.tooling.AddReusablePart: Adds a new instance
License requirements: None.
addNewRule(String, String, String) - Method in interface nxopen.cam.FeatureTeaching: Adds a new rule
License requirements: fbm_author ("FBM Author")
.
addNewSet(boolean) - Method in interface nxopen.blockstyler.SetList: Adds an item to the end of the list
License requirements: None.
addNewSetLabel() - Method in interface nxopen.blockstyler.SetList: Returns the AddNewSetLabel.
addNewSpecification(String) - Method in interface nxopen.routing.ReuseLibrary: Adds a new empty specification to the library.
addNewStopshortData(BlendStopshortBuilder) - Method in interface nxopen.features.EdgeBlendBuilder: Add an edge blend stop short data for an edge in the edge blend
License requirements: solid_modeling ("SOLIDS MODELING")
.
addNewTaper() - Method in interface nxopen.features.EmbossSidewall: Create a new single EmbossTaper object and appends to the sidewall taper list.
addNgcComponent(String) - Method in interface nxopen.pdm.PendingComponentsManager: Adds a pending NGC component.
addNodes(FENode[], boolean[], boolean[], boolean[], boolean[], boolean[], boolean[]) - Method in interface nxopen.cae.CaeDOFSet: Add nodes to the CaeDOFSet A true for a dof logical entry would mean that the dof is included for that corresponding node.
addNodes(Point3d[]) - Method in interface nxopen.cae.MultipleNodeCreateBuilder: Adds new node definitions at specifiied positions with repect to the defined refernce coordinate system.
addNodes(Point3d[], int[]) - Method in interface nxopen.cae.MultipleNodeCreateBuilder: Adds a new node definition at specifiied positions with repect to the defined refernce coordinate system.
addNonIntersectedStructure(Body) - Method in interface nxopen.features.shipdesign.PenetrationAssociationBuilder: Adds nonintersected structures
License requirements: nx_penetration_mgmt ("Penetration Management")
.
addNonIntersectedStructure(Body) - Method in interface nxopen.features.shipdesign.PenetrationCutoutBuilder: Adds nonintersected structures
License requirements: nx_penetration_mgmt ("Penetration Management")
.
addNonIntersectedStructure(Body) - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder: Adds nonintersected structures
License requirements: nx_penetration_mgmt ("Penetration Management")
.
addObject(NXObject) - Method in interface nxopen.motion.MotionSolution: Adds a solution solved object to a solution
License requirements: mechanisms ("MECHANISMS")
.
addObject(Tag, boolean, Tag) - Method in interface nxopen.uf.UFPlist: Refer to UF_PLIST_add_object for documentation.
addObjectClearanceZone(DisplayableObject, Expression) - Method in interface nxopen.assemblies.ClearanceAnalysisBuilder: Add a Clearance Zone around an object.
addObjectives(TBSSingleObjective[]) - Method in interface nxopen.cae.optimization.TBSObjectives: Add objectives
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
addObjects(TaggedObject[]) - Method in interface nxopen.mechatronics.PMNavFolderObject: Adds physics objects.
addObjects(DesignRuleViolation[]) - Method in interface nxopen.routing.DesignRuleViolation: Add an object in violation to the violation
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
addObjects(Tag, int, Tag[]) - Method in interface nxopen.uf.UFSket: Refer to UF_SKET_add_objects for documentation.
addObjectsToReferenceSet(NXObject[]) - Method in interface nxopen.ReferenceSet: Addition of objects to reference set
License requirements: assemblies ("ASSEMBLIES MODULE")
.
AddObjectsToRegionBuilder - Interface in nxopen.drawings: Creates the builder for associating the symbols from library to the region
To create a new instance of this class, use DrawingRegionCollection.createAddObjectsToRegionBuilder()

Created in NX8.0.0
addOffset() - Method in interface nxopen.features.CurveFinderBuilder: Adds offset relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
addOffset() - Method in interface nxopen.features.WrapGeometryBuilder: Returns the Additional offset.
addOffset() - Method in interface nxopen.sim.SinumerikCaSimplifyBodiesBuilder: Returns the Additional offset.
addOffset - Variable in class nxopen.uf.UFModl.WrapAssem
addOffset - Variable in class nxopen.uf.UFModl.WrapGeom
addOkayHandler(DialogItem.Okay, boolean) - Method in interface nxopen.uistyler.DialogItem: Registers ok callback.
addOkHandler(BlockDialog.Ok) - Method in interface nxopen.blockstyler.BlockDialog: Adds Ok callback handler to the dialog.
ADDON - Static variable in class nxopen.tooling.ScrapDesignBuilder.Body: Add-on operation
addonOperation() - Method in interface nxopen.tooling.ScrapDesignBuilder: Returns the add-on operation, which includes overlap, overcut, trimming and user defined
License requirements: None.
addOperation(NXObject[]) - Method in interface nxopen.mechatronics.SystemObject: Adds operation object.
addOptionalCreationNonKeyAttrsToChosenAttrs(FamilyAttribute) - Method in interface nxopen.partfamily.TemplateManager: Add all optional creation non key attributes to chosen list at the end or after a selected attribute from chosen attribute list.
addOrthographicView(Tag, Tag, UFDraw.ProjDir, double[]) - Method in interface nxopen.uf.UFDraw: Refer to UF_DRAW_add_orthographic_view for documentation.
addPageSwitchHandler(DialogItem.PageSwitch, boolean) - Method in interface nxopen.uistyler.DialogItem: Registers switch callback.
addPairClearanceZone(DisplayableObject, DisplayableObject, Expression) - Method in interface nxopen.assemblies.ClearanceAnalysisBuilder: Add a Clearance Zone between a pair of objects.
addParallel() - Method in interface nxopen.features.CurveFinderBuilder: Adds parallel relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
addParameterList(GanttOperationParameterBuilder[]) - Method in interface nxopen.mechatronics.GanttOperationBuilder: Sets the parameter data
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
addParentNewPart(String, int, boolean) - Method in interface nxopen.tooling.FastenerAssy: Adds new part for the parent node
License requirements: None.
addPart(String) - Method in interface nxopen.features.shipdesign.PlatePreparationBuilder: Add the part to the collection of parts to be unformed and scaled.
addPart(String) - Method in interface nxopen.features.shipdesign.ShipFlatPatternBuilder: Deprecated.
Deprecated in NX8.0.0. Use PlatePreparationBuilder instead.
addPart(String) - Method in interface nxopen.uf.UFClone: Refer to UF_CLONE_add_part for documentation.
addPartAs3dHarness(Part) - Method in interface nxopen.formboard.FormboardManager: Sets the input part as the part containing the potential harnesses to flatten.
addPartAttachment(IssueAttachment) - Method in interface nxopen.issue.IssueBriefcaseSynchronizeBuilder: Adds an part type IssueAttachment , only the added parts can be synchronized to server.
addPartClosedHandler(PartCollection.PartClosedHandler) - Method in interface nxopen.PartCollection: Registers a user defined method that is called whenever a part is in the process of being closed
License requirements: None.
addPartCreatedHandler(PartCollection.PartCreatedHandler) - Method in interface nxopen.PartCollection: Registers a user defined method that is called whenever a new part is created
License requirements: None.
addPartModifiedHandler(PartCollection.PartModifiedHandler) - Method in interface nxopen.PartCollection: Registers a user defined method that is called whenever a part is modified
License requirements: None.
addPartOccurance(Component) - Method in interface nxopen.tooling.AddReusablePart: Adds occurance into the part data
License requirements: None.
addPartOpenedHandler(PartCollection.PartOpenedHandler) - Method in interface nxopen.PartCollection: Registers a user defined method that is called whenever a part is opened
License requirements: None.
addPartRenamedHandler(PartCollection.PartRenamedHandler) - Method in interface nxopen.PartCollection: Registers a user defined method that is called whenever a part is renamed
License requirements: None.
addPartSavedAsHandler(PartCollection.PartSavedAsHandler) - Method in interface nxopen.PartCollection: Registers a user defined method that is called whenever a part is saved as a specified name
License requirements: None.
addPartSavedHandler(PartCollection.PartSavedHandler) - Method in interface nxopen.PartCollection: Registers a user defined method that is called whenever a part is saved
License requirements: None.
addPartToAssembly(Tag, String, String, String, double[], double[], int) - Method in interface nxopen.uf.UFAssem: Refer to UF_ASSEM_add_part_to_assembly for documentation.
AddPartToAssemblyData() - Constructor for class nxopen.uf.UFAssem.AddPartToAssemblyData
addPassenger(BaseDataPassengerBuilder) - Method in interface nxopen.features.vehicledesign.BaseDataBuilder: Adds a passenger, which represents BaseDataPassengerBuilder , to the base data.
addPendingComponent(String, NXObject, String, String, Point3d, Matrix3x3, int, boolean) - Method in interface nxopen.assemblies.ComponentAssembly: Add a pending Component in this assembly.
addPhysicsObjects(NXObject[]) - Method in interface nxopen.mechatronics.SystemObject: Adds behavioral physics objects.
addPipeJointSetType(CustomManager.PipeJointSetType) - Method in interface nxopen.weld.CustomManager: Registers a user defined method that is called whenever a welding joint is created
License requirements: None.
addPlanarFaceData(Face) - Method in interface nxopen.tooling.EnlargeSurfaceBuilder: Initializes the planar face data with face, and adds the data to builder.
addPmiDimension(DimensionData, PmiData, Point3d, boolean) - Method in interface nxopen.annotations.DimensionSet: Adds a PMI dimension to the PMI dimension set.
addPmiDimension(DimensionData, PmiData, Xform, Point3d, boolean) - Method in interface nxopen.annotations.DimensionSet: Adds a PMI dimension to the PMI dimension set.
addPMILabel(NXObject) - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder: Add a PMI label in specified position to represent the deviation value.
addPmiView(String) - Method in interface nxopen.annotations.PmiFilterByView: Tbd
License requirements: None.
addPoint(String, Point3d) - Method in interface nxopen.DataContainer: Adds the point value in the container.
addPoint(OnPathDimensionBuilder) - Method in interface nxopen.geometricutilities.AlignmentMethodBuilder: Insert a given point, and create corresponding points on other sections.
addPointExitHandler(CustomManager.PointExitHandler) - Method in interface nxopen.weld.CustomManager: Registers a user defined method to be notified when weld point features are created.
addPort(Port) - Method in interface nxopen.routing.LogicalTerminal: Add a physical nxopen.routing.Port to the terminal.
addPostCommitCallback(PartOperationImportObserver.PostCommitCb) - Method in interface nxopen.pdm.PartOperationImportObserver: Registers a user defined PostCommit callback that is called after commit of import operation
License requirements: None.
addPostureLib(String) - Method in interface nxopen.features.HumanBuilder: Add posture library
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
addPostView(int) - Method in interface nxopen.uf.UFSfPost: Refer to UF_SF_POST_add_post_view for documentation.
addPreAutoassignCallback(PartOperationImportObserver.PreAutoassignCb) - Method in interface nxopen.pdm.PartOperationImportObserver: Registers a user defined PreAutoAssign callback that is called before auto-assigning attributes
License requirements: None.
addPreCommitCallback(PartOperationImportObserver.PreCommitCb) - Method in interface nxopen.pdm.PartOperationImportObserver: Registers a user defined PreCommit callback that is called before commit of import operation
License requirements: None.
addPreviewControlPoint(Point3d) - Method in interface nxopen.routing.LinearPathBuilder: Add a new control point to the path.
addProductAssembly(String) - Method in interface nxopen.uf.UFUgmgr: Deprecated.
The equivalent Open C method has retired
addProductAssemblyPart(String) - Method in interface nxopen.uf.UFUgmgr: Refer to UF_UGMGR_add_product_assembly_part for documentation.
addProductInterface(NXObject) - Method in interface nxopen.assemblies.productinterface.ObjectBuilder: Adds an object to the product interface; currently supported types are expressions and geometry.
AddProductInterfaceData() - Constructor for class nxopen.assemblies.productinterface.ObjectBuilder.AddProductInterfaceData
addProductInterfaceObject(NXObject) - Method in interface nxopen.assemblies.productinterface.ObjectBuilder: Adds an object to the product interface; currently supported types are expressions and geometry
License requirements: None.
addProductInterfaceObject1(NXObject, String, String, boolean) - Method in interface nxopen.assemblies.productinterface.ObjectBuilder: Adds an object to the product interface; currently supported types are expressions and geometry
License requirements: None.
addProjectFeatureCurves(Curve) - Method in interface nxopen.ConvertToFromReferenceBuilder: Adds all output entities belonging to the project feature that contains the input tag to the input objects list of the command.
addRadialPivot(Point3d, int, double) - Method in interface nxopen.formboard.ShapeSegmentBuilder: License requirements: routing_harness ("Routing Harness")
.
addRangeFromDepth(double, double, CutLevel.MeasureTypes, int) - Method in interface nxopen.cam.CutLevel: Add a new range by specifying the range depth
License requirements: cam_base ("CAM BASE")
.
addRangeFromGeometry(NXObject, double) - Method in interface nxopen.cam.CutLevel: Add a new range by specifying the level geometry
License requirements: cam_base ("CAM BASE")
.
addRealParameter(String, double, Unit, boolean, boolean) - Method in interface nxopen.mechatronics.ParameterStockBuilder: Adds Real parameter.
addRefSetMembers(Tag, int, Tag[]) - Method in interface nxopen.uf.UFAssem: Refer to UF_ASSEM_add_ref_set_members for documentation.
addRegionPoint(Point3d) - Method in interface nxopen.features.shipdesign.PlateBuilder: Adds a region point.
addRelatedInterfaceTerminal(InterfaceTerminalShadow) - Method in interface nxopen.routing.InterfaceTerminalRelationshipBase: Adds a nxopen.routing.Port to the InterfaceTerminalRelationshipBase object with a relationship of related.
addRelatedPartsToCopy(BasePart, BasePart[], String[], PartOperationBuilder.OperationType) - Method in interface nxopen.pdm.PartOperationCopyBuilder: Add related part to the part undergoing an operation.
addRelatedPartToOperate(BasePart, BasePart[], String[], PartOperationBuilder.OperationType) - Method in interface nxopen.pdm.PartOperationBuilder: Deprecated.
Deprecated in NX10.0.0. Use PartOperationCopyBuilder.addRelatedPartsToCopy(nxopen.BasePart, nxopen.BasePart[], java.lang.String[], nxopen.pdm.PartOperationBuilder.OperationType) instead
addRelatedSingleDevice(SingleDevice) - Method in interface nxopen.routing.DeviceRelationship: Adds a SingleDevice to the collection of related SingleDevice objects.
addRemovalHoleIndex(int) - Method in interface nxopen.tooling.FastenerAssy: Add the removal hole index in the fastener setup data
License requirements: None.
AddRemoveBoxViewBuilder - Interface in nxopen.drawings: This class is used to construct the add remove box view Builder
To create a new instance of this class, use DraftingViewCollection.createAddRemoveBoxViewBuilder(nxopen.drawings.DraftingView)

Created in NX8.0.0
AddRemoveBoxViewBuilder.ModeType - Class in nxopen.drawings: Mode type
addRequest(PenetrationRequest) - Method in interface nxopen.features.shipdesign.PenetrationAssociationBuilder: Adds request object
License requirements: nx_penetration_mgmt ("Penetration Management")
.
addResponse(String, boolean) - Method in interface nxopen.PartCloseResponses: Add a response to the list.
addReusableFeature() - Method in interface nxopen.tooling.ToolingManager: Returns the AddReusableFeatureCollection instance belonging to this part .
AddReusableFeatureCollection - Interface in nxopen.tooling: Represents a collection of AddReusableFeature
To obtain an instance of this class, refer to ToolingManager

Created in NX7.5.0
AddReusableFeatureCollection.InputData - Class in nxopen.tooling: Defines the input data of AddReusableFeatureBuilder
AddReusablePart - Interface in nxopen.tooling: Represents a AddReusablePart
To create a new instance of this class, use AddReusablePartCollection.createBuilder()

Created in NX5.0.0
AddReusablePart.ModeMethod - Class in nxopen.tooling: Represents adding or editing a reusable component mode method
AddReusablePart.PositionMethod - Class in nxopen.tooling: Represents the position method
AddReusablePartCollection - Interface in nxopen.tooling: Represents a collection of AddReusablePart
To obtain an instance of this class, refer to Part

Created in NX5.0.0
addRow(Tag, Tag, int) - Method in interface nxopen.uf.UFTabnot: Refer to UF_TABNOT_add_row for documentation.
addRuleViolations(Tag, int, Tag[]) - Method in interface nxopen.uf.UFRule: Refer to UF_RULE_add_rule_violations for documentation.
addRuns(Run[]) - Method in interface nxopen.routing.RoutingSystem: Adds Run objects to a RoutingSystem
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")

Created in NX4.0.0
addScreenSizeFitHandler(UserDefinedClass.DisplayCallback) - Method in interface nxopen.userdefinedobjects.UserDefinedClass: Registers the screen size fit callback.
addScrewArray(String, String, String, String, String, int, FastenerAssy.StackTypeMethod) - Method in interface nxopen.tooling.FastenerAssy: Adds stack array
License requirements: None.
addSearchLibrary(String) - Method in interface nxopen.uf.UFKf: Refer to UF_KF_add_search_library for documentation.
addSearchTermBuilder(SearchTermBuilder) - Method in interface nxopen.assemblies.SubsetRecipe: Add a SearchTermBuilder to the recipe.
addSection(int, Section) - Method in interface nxopen.geometricutilities.AlignmentMethodBuilder: Add a section at the given index among existing sections.
addSectionData(double[], double[], double[], double) - Method in interface nxopen.cae.ftk.ComplexSectionBasedMatrixRecord: Adds the complex data values for each section.
addSectionData(double[], double[], double) - Method in interface nxopen.cae.ftk.RealSectionBasedMatrixRecord: Adds the real data values for each section.
addSectionView() - Method in interface nxopen.tooling.AssemblyDrawingBuilder: The option for add section view
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
addSeedEdge(CAEVertex, CAEEdge) - Method in interface nxopen.cae.EdgePathMethod: Deprecated.
Deprecated in NX10.0.0. Use overloaded EdgePathMethod.addSeedEdge(nxopen.cae.CAEVertex, nxopen.cae.CAEEdge) with additional arguments instead.
addSeedEdge(CAEVertex, CAEEdge, boolean, boolean, double) - Method in interface nxopen.cae.EdgePathMethod: Add seed (start vertex and edge) to the end of the path.
addSeedEdge(FENode, FEElemEdge) - Method in interface nxopen.cae.ElemEdgePathMethod: Deprecated.
Deprecated in NX10.0.0. Use overloaded ElemEdgePathMethod.addSeedEdge(FENode, nxopen.cae.FEElemEdge) with additional arguments instead.
addSeedEdge(FENode, FEElemEdge, boolean, boolean, boolean, double, boolean, double) - Method in interface nxopen.cae.ElemEdgePathMethod: Add seed (start vertex and edge) to the end of the path.
addSegments(Curve[]) - Method in interface nxopen.routing.Stock: Adds new segments to this object.
addSegmentsToList(ISegment[]) - Method in interface nxopen.routing.IPath: Adds segment(s) to an IPath object.
addSegmentToStock(Tag, Tag) - Method in interface nxopen.uf.UFRoute: Refer to UF_ROUTE_add_segment_to_stock for documentation.
addSelectedCurve(Body) - Method in interface nxopen.features.shipdesign.PenetrationAssociationBuilder: Adds selected curves
License requirements: nx_penetration_mgmt ("Penetration Management")
.
addSelectedPointPairs() - Method in interface nxopen.cae.FaceFromBoundaryBuilder: Designate the join of the first and second pt by a straight edge (joining the ends of open loop segments).
addSelectFace(Body) - Method in interface nxopen.tooling.AssignPatchBuilder: Add selected face to select list.
addSelectionHandler(UserDefinedClass.DisplayCallback) - Method in interface nxopen.userdefinedobjects.UserDefinedClass: Registers the UDO selection callback.
addSeparator(int) - Method in interface nxopen.menubar.ContextMenu: Adds a separator to the context menu.
addSeperator() - Method in interface nxopen.blockstyler.TreeListMenu: Adds a seperator
License requirements: None.
addSequencingView(Tag) - Method in interface nxopen.uf.UFAssem: Refer to UF_ASSEM_add_sequencing_view for documentation.
addSetbackData(Edge[], boolean[], String[]) - Method in interface nxopen.features.EdgeBlendBuilder: Add an edge blend setback data for an edge in the edge blend
License requirements: solid_modeling ("SOLIDS MODELING")
.
addSignalAdapters(NXObject[]) - Method in interface nxopen.mechatronics.SystemObject: Adds signal adapter objects.
addSingleDeviceChild(SingleDevice) - Method in interface nxopen.routing.AssemblyDefinition: Adds a SingleDevice object to the list of objects contained in the assembly.
addSlackToSpline(SplinePathBuilder.SplinePathSlackType, Expression, nxopen.Direction) - Method in interface nxopen.routing.SplinePathBuilder: License requirements: routing_base ("Routing Basic")
.
addSmartPoint(Point, double) - Method in interface nxopen.Section: Deprecated.
Deprecated in NX7.5.0. Please use ScRuleFactory.createRuleCurveDumb(nxopen.Curve[]) followed by Section.addToSection(nxopen.SelectionIntentRule[], nxopen.NXObject, nxopen.NXObject, nxopen.NXObject, nxopen.Point3d, nxopen.Section.Mode) instead.
addSplinePoint(Point3d) - Method in interface nxopen.formboard.ShapeSegmentBuilder: Adds a point to the existing spline.
addSplitPoint(Point3d, DisplayableObject) - Method in interface nxopen.features.subdivision.SubdivisionSplitFaceBuilder: Add split face point.
addStandardFont(Tag, String) - Method in interface nxopen.uf.UFUgfont: Refer to UF_UGFONT_add_standard_font for documentation.
addStandardPart() - Method in interface nxopen.features.shipdesign.StandardPartFrameworkBuilder: Adds a standard part into the assembly context, restores the broken wave links and renames the standard part when all external references are defined.
addStep(SimSolutionStep) - Method in interface nxopen.cae.SimSolution: Adds a step to the solution
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
addStock(CharacteristicList, CharacteristicList, ISegment[], String) - Method in interface nxopen.routing.StockCollection: Creates stock on the given segments.
addStock(CharacteristicList, CharacteristicList, ISegment[], String, boolean) - Method in interface nxopen.routing.StockCollection: Creates normal or space reservation stock on the given segments.
addStock(CharacteristicList, CharacteristicList, ISegment[], String, boolean, String) - Method in interface nxopen.routing.StockCollection: Creates normal or space reservation stock on the given segments.
addStopshortData(Edge, boolean, String) - Method in interface nxopen.features.EdgeBlendBuilder: Deprecated.
Deprecated in NX5.0.0. Use Features.EdgeBlendBuilder#addNewStopshortData instead.
addString(String, String) - Method in interface nxopen.DataContainer: Adds the string value in the container.
addStringParameter(String, String, boolean, boolean) - Method in interface nxopen.mechatronics.ParameterStockBuilder: Adds String parameter.
addStrings(String, String[]) - Method in interface nxopen.DataContainer: Adds the strings value in the container.
addStringToOcfData(Tag, int, int, UFCurve.OcfValues[], UFCurve.OcfData) - Method in interface nxopen.uf.UFCurve: Refer to UF_CURVE_add_string_to_ocf_data for documentation.
addStripperInsert() - Method in interface nxopen.tooling.PiercingInsertBuilder: Add standard stripper insert.
addSubfolder(SimLbcFolder) - Method in interface nxopen.cae.SimLbcFolder: Add a child folder
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
addSubmenu(String, int) - Method in interface nxopen.menubar.ContextMenu: Adds a submenu to the context menu.
addSuppressedObject(NXObject) - Method in interface nxopen.motion.MotionSolution: Adds a suppressed object to a solution
License requirements: mechanisms ("MECHANISMS")
.
addSuppressHandler(UserDefinedClass.GenericCallback) - Method in interface nxopen.userdefinedobjects.UserDefinedClass: Registers the suppress callback.
addSurfaceData(Face) - Method in interface nxopen.tooling.EnlargeSurfaceBuilder: Initializes the surface data with face, and adds the data to builder.
AddSurfBuilder - Interface in nxopen.die: Represents a AddSurfBuilder builder
To create a new instance of this class, use DieCollection.createAddSurfBuilder(nxopen.features.Feature)

Created in NX6.0.0
AddSurfBuilder.Methods - Class in nxopen.die: Settings for the type of addendum surface being created.
addSwitchHandler(TabControl.SwitchHandler, boolean) - Method in interface nxopen.uistyler.TabControl: Registers switch callback.
addSxlineSxseg(Tag, UFDraw.SxsegType, UFDraw.SxlineLeg, UFDrf.Object) - Method in interface nxopen.uf.UFDraw: Refer to UF_DRAW_add_sxline_sxseg for documentation.
addSxseg(Tag, UFDraw.SxlineSxsegs) - Method in interface nxopen.uf.UFDraw: Refer to UF_DRAW_add_sxseg for documentation.
addSymbol(Point3d) - Method in interface nxopen.annotations.ForeshorteningSymbolBuilder: Add the foreshortening symbol
License requirements: None.
addSymbol(NXObject, String, int, int) - Method in interface nxopen.annotations.TextWithSymbolsBuilder: Adds a symbol
License requirements: drafting ("DRAFTING")
.
addSymbolToObject(UFDrf.SymbolCreateData, Tag) - Method in interface nxopen.uf.UFDrf: Refer to UF_DRF_add_symbol_to_object for documentation.
addSymmetric(int) - Method in interface nxopen.features.CurveFinderBuilder: Add symmetric relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
addSystemClass(KinematicComponentBuilder.SystemClass) - Method in interface nxopen.sim.KinematicComponentBuilder: Add a system class
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder") OR resource_manager_nx ("Teamcenter Resource Manager")
.
addTaggedObject(String, TaggedObject) - Method in interface nxopen.DataContainer: Adds the tagged object in the container.
addTaggedObjectVector(String, TaggedObject[]) - Method in interface nxopen.DataContainer: Adds the tagged object vector in the container.
addTags() - Method in interface nxopen.mechatronics.OPCClientBuilder: Add item to the list.
addTangent() - Method in interface nxopen.features.CurveFinderBuilder: Adds tangent relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
addTangent - Variable in class nxopen.uf.UFModl.RipedgeData
addTangentFaces() - Method in interface nxopen.features.FaceBlendBuilder: Returns the option for Add Tangent Faces As Encountered
License requirements: None.
addTarget(Body) - Method in interface nxopen.features.TrimBodyBuilder: Adds a target body during create.
addTarget(NXObject) - Method in interface nxopen.routing.RouteLogicalAssociation: Adds target to Logical Assocition
License requirements: routing_harness ("Routing Harness")
.
addTargetBody(NXObject, NXObject) - Method in interface nxopen.tooling.ReusablePocketBuilder: Adds target body.
addTerminalPorts(Tag, int, Tag[]) - Method in interface nxopen.uf.UFRoute: Refer to UF_ROUTE_add_terminal_ports for documentation.
addTerminateCallback(PartOperationImportObserver.TerminateCb) - Method in interface nxopen.pdm.PartOperationImportObserver: Registers a user defined Terminate callback that is called during destruction of import builder
License requirements: None.
addTextString(String) - Method in interface nxopen.display.TransientText: Adds a text string to the TransientText object.
addThruFaces(Tag, int, Tag[]) - Method in interface nxopen.uf.UFModeling: Refer to UF_MODL_add_thru_faces for documentation.
AddTicBuilder - Interface in nxopen.annotations: Represents a AddTicBuilder .
addTitleLine(UFSfLegend.Title, String) - Method in interface nxopen.uf.UFSfLegend: Refer to UF_SF_LEGEND_add_title_line for documentation.
addToChangeover() - Method in interface nxopen.tooling.ChangeoverManagementBuilder: Add selected components to the selected changeover.
addToChosenAttributes(String[], FamilyAttribute.AttrType[], int) - Method in interface nxopen.partfamily.TemplateManager: Adds new attributes to chosen attributes list of a part family
License requirements: solid_modeling ("SOLIDS MODELING")
.
addToClassSel(int) - Method in interface nxopen.uf.UFUi: Refer to UF_UI_add_to_class_sel for documentation.
addToCset(Tag, Tag, boolean) - Method in interface nxopen.uf.UFAssem: Refer to UF_ASSEM_add_to_cset for documentation.
addToDeleteList(NXObject[]) - Method in interface nxopen.Update: Adds objects to the global delete list.
addToDeleteList(NXObject) - Method in interface nxopen.Update: Adds an object to the global delete list.
addToDieData(Curve[]) - Method in interface nxopen.die.Tip: Adds the input curves to the die data.
addToDimension(int, int, int[], int, int, int, int, int, String[]) - Method in interface nxopen.uf.UFDrf: Refer to UF_DRF_add_to_dimension for documentation.
addToFolder(Tag, Tag) - Method in interface nxopen.uf.UFUgmgr: Refer to UF_UGMGR_add_to_folder for documentation.
addToMap(TaggedObject, TaggedObject) - Method in interface nxopen.LinkedMirrorPartEntityMapData: Add a map between an entity in the source part and an entity in the mirror part
License requirements: None.
addToMaterialLibraryToggle() - Method in interface nxopen.PhysicalMaterialBuilder: Returns the add_to_material_library_toggle value.
addToolComponent(NXObject) - Method in interface nxopen.tooling.ReusablePocketBuilder: Adds tool component.
addToPartitions(Partition[]) - Method in interface nxopen.assemblies.DesignElementBuilder: Specify partitions to which the design elements will be added.
addToPlotLayout() - Method in interface nxopen.PlotBuilder: Add Plot to Layout.
addTopNode(Point3d, Point3d, NXObject, int) - Method in interface nxopen.tooling.FastenerAssy: Adds top node for the fastener assembly
License requirements: None.
addToRecentFileList(Tag) - Method in interface nxopen.uf.UFPart: Refer to UF_PART_add_to_recent_file_list for documentation.
addToScopedObjectSet(NXObject, RunItem.Type) - Method in interface nxopen.routing.AssignPathBuilder: Add the given object to the scoped object set
License requirements: routing_base ("Routing Basic")
.
addToSection(SelectionIntentRule[], NXObject, NXObject, NXObject, Point3d, Section.Mode) - Method in interface nxopen.Section: Adds selection intent rules to the section.
addToSection(SelectionIntentRule[], NXObject, NXObject, NXObject, Point3d, Section.Mode, boolean) - Method in interface nxopen.Section: Adds selection intent rules to the section with the option of restricting chaining and limit discovery to a single feature.
addToSelectedBCsList(SimBC[]) - Method in interface nxopen.cae.BCSelectionDisplayBuilder: Add BCs to the Selected BCs List
License requirements: None.
addToSelectedViews(int) - Method in interface nxopen.uf.UFSfPost: Refer to UF_SF_POST_add_to_selected_views for documentation.
addToSelectionList(SelectionHandle, NXObject[], boolean) - Method in interface nxopen.Selection: Deprecated.
Deprecated in NX8.0.0. Use Selection.addToTaggedObjectsSelectionList(nxopen.SelectionHandle, nxopen.TaggedObject[], boolean) instead
addToSelList(UFVariant, int, Tag[], boolean) - Method in interface nxopen.uf.UFUi: Refer to UF_UI_add_to_sel_list for documentation.
addToSolutionNx(int, Tag) - Method in interface nxopen.uf.UFSf: Refer to UF_SF_add_to_solution_nx for documentation.
addToStepNx(int, Tag) - Method in interface nxopen.uf.UFSf: Refer to UF_SF_add_to_step_nx for documentation.
addToTaggedObjectsSelectionList(SelectionHandle, TaggedObject[], boolean) - Method in interface nxopen.Selection: Add objects to the selection list.
addToViewSet(Tag, UFView.StandardOrientation) - Method in interface nxopen.uf.UFView: Refer to UF_VIEW_add_to_view_set for documentation.
addUnitEffectivity(int, int) - Method in interface nxopen.EffectivityConditionBuilder: Adds specified discrete or range effectivity values to the builder.
addUnitEffectivity(int, EffectivityConditionBuilder.ToUnitType) - Method in interface nxopen.EffectivityConditionBuilder: Adds specified range effectivity value to the builder.
addUpdateHandler(BlockDialog.Update) - Method in interface nxopen.blockstyler.BlockDialog: Adds Update callback handler to the dialog.
addUpdateHandler(UserDefinedFeatureClass.UpdateCallback) - Method in interface nxopen.features.UserDefinedFeatureClass: Registers the udf update callback.
addUpdateHandler(UserDefinedClass.LinkCallback) - Method in interface nxopen.userdefinedobjects.UserDefinedClass: Registers the update callback.
addUserClassification(String) - Method in interface nxopen.sim.KinematicConfigurator: Adds a new user class name to the list of user classes
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
addUserClassName(String) - Method in interface nxopen.sim.KinematicComponentBuilder: Adds a user class to the component
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
addUtilityFunctionVisibilityHandler(UI.UtilityFunctionVisibilityHandler) - Method in interface nxopen.UI: Registers a user defined method that is called whenever an utility function state changes.
addValueChangedHandler(ColorTool.ValueChanged, boolean) - Method in interface nxopen.uistyler.ColorTool: Registers value change callback.
addValueChangedHandler(IntegerScale.ValueChanged, boolean) - Method in interface nxopen.uistyler.IntegerScale: Registers value change callback.
addValueChangedHandler(OptionToggle.ValueChanged, boolean) - Method in interface nxopen.uistyler.OptionToggle: Registers value change callback.
addValueChangedHandler(RadioBox.ValueChanged, boolean) - Method in interface nxopen.uistyler.RadioBox: Registers value change callback.
addValueChangedHandler(RealScale.ValueChanged, boolean) - Method in interface nxopen.uistyler.RealScale: Called when a dialog user moves the slider up and down the scale.
addValueChangedHandler(Toggle.ValueChanged, boolean) - Method in interface nxopen.uistyler.Toggle: Registers value change callback.
addVariableBevelHandler(CustomManager.VariableBevelHandler) - Method in interface nxopen.weld.CustomManager: Registers a user defined method to define variable bevel angles.
addVariablePointData(Edge, String, String, String, String, Point, boolean, boolean) - Method in interface nxopen.features.EdgeBlendBuilder: Add an edge blend variable radius data for an edge in the edge blend
License requirements: solid_modeling ("SOLIDS MODELING")
.
addVariableRadiusData(Edge, double, String, Point, boolean) - Method in interface nxopen.features.EdgeBlendBuilder: Deprecated.
Deprecated in NX6.0.0. Use Features.EdgeBlendBuilder#addVariableRadiusDataNew instead.
addVariableRadiusDataNew(Edge, String, String, Point, boolean) - Method in interface nxopen.features.EdgeBlendBuilder: Add an edge blend variable radius data for an edge in the edge blend Note: This ja will always create arclength parameter
License requirements: solid_modeling ("SOLIDS MODELING")
.
addVariableRadiusDataNew(Edge, String, String, Point, boolean, boolean) - Method in interface nxopen.features.EdgeBlendBuilder: Add an edge blend variable radius data for an edge in the edge blend
License requirements: solid_modeling ("SOLIDS MODELING")
.
addVector(String, Vector3d) - Method in interface nxopen.DataContainer: Adds the vector value in the container.
addVertexOnCurve() - Method in interface nxopen.features.CurveFinderBuilder: Adds vertex on curve relations of the last curves added to curve collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
addView(NXObject, String, String[]) - Method in interface nxopen.tooling.AssemblyDrawingBuilder: The option for add view
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
addViolationLocations(DesignRuleViolationLocation[]) - Method in interface nxopen.routing.DesignRuleViolation: This will add given number of violation location objects.
addViolationObjects(Tag, int, Tag[]) - Method in interface nxopen.uf.UFRule: Refer to UF_RULE_add_violation_objects for documentation.
addViolations(DesignRuleViolation[]) - Method in interface nxopen.routing.DesignRule: Violation are added to the design rule
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
addVirtualPorts(Tag, int, String[]) - Method in interface nxopen.uf.UFRoute: Refer to UF_ROUTE_add_virtual_ports for documentation.
addWatermark() - Method in interface nxopen.PrintPDFBuilder: Returns the Add Watermark option.
addWeldFaceDefinition() - Method in interface nxopen.cae.MeshControlBuilder: Create weld face definition
License requirements: nx_masterfem ("Finite Element Modeling")
.
addWeldJointHandler(CustomManager.WeldJointHandler) - Method in interface nxopen.weld.CustomManager: Registers a user defined method that is called whenever a welding joint is created or updated
License requirements: None.
addWorkPartChangedHandler(PartCollection.WorkPartChangedHandler) - Method in interface nxopen.PartCollection: Registers a method that is called whenever the work part changes
License requirements: None.
addYCurves(GraphBuilder.CurveData[]) - Method in interface nxopen.motion.GraphBuilder: Add curves to the end of y curve list
License requirements: mechanisms ("MECHANISMS")
.
ADJ - Static variable in class nxopen.cam.LaserControlPoint.ControlPointTypes: adj
adjacencyToleranceData() - Method in interface nxopen.drawings.ViewStyleSectionBuilder: Returns the adjacency tolerance on the SECTION tab of the View Style Dialog
License requirements: None.
ADJACENT_ANGLE - Static variable in class nxopen.Sketch.AutoDimensioningRule: Create Adjacent Angles
ADJACENT_EDGES - Static variable in class nxopen.features.NSidedSurfaceBuilder.FlowDirectionType: adjacent edges
ADJACENT_FACES - Static variable in class nxopen.features.ExtractFaceBuilder.FaceOptionType: adjacent face type
adjacentBlades() - Method in interface nxopen.cam.MillCutParameters: Returns the Adjacent Blades Stock Option Type
License requirements: None.
adjacentBlend1() - Method in interface nxopen.features.StyledBlendBuilder: Returns the first adjacent blend
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
adjacentBlend1TrimEnd() - Method in interface nxopen.features.StyledBlendBuilder: Returns the trim end of the first adjacent blend
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
adjacentBlend1TrimStart() - Method in interface nxopen.features.StyledBlendBuilder: Returns the trim start of the first adjacent blend
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
adjacentBlend2() - Method in interface nxopen.features.StyledBlendBuilder: Returns the second adjacent blend
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
adjacentBlend2TrimEnd() - Method in interface nxopen.features.StyledBlendBuilder: Returns the trim end of the second adjacent blend
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
adjacentBlend2TrimStart() - Method in interface nxopen.features.StyledBlendBuilder: Returns the trim start of the second adjacent blend
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
adjacentBlends() - Method in interface nxopen.drawings.ViewStyleVirtualIntersectionsBuilder: Returns the adjacent blends toggle on the VIRTUAL INTERSECTIONS tab of the View Style Dialog
License requirements: None.
adjacentBlends() - Method in interface nxopen.drawings.VirtualIntersectionsViewStyle: Returns the status of adjacent blends.
adjacentBlends() - Method in interface nxopen.preferences.VirtualIntersectionsViewPreferences: Returns the status of adjacent blends.
adjacentBlendsColor() - Method in interface nxopen.drawings.VirtualIntersectionsViewStyle: Returns the color of adjacent blends.
adjacentBlendsColor() - Method in interface nxopen.preferences.VirtualIntersectionsViewPreferences: Returns the color of adjacent blends.
adjacentBlendsEndGaps() - Method in interface nxopen.drawings.VirtualIntersectionsViewStyle: Returns the status of adjacent blends end gaps.
adjacentBlendsEndGaps() - Method in interface nxopen.preferences.VirtualIntersectionsViewPreferences: Returns the status of adjacent blends end gaps.
adjacentBlendsEndGapsData() - Method in interface nxopen.drawings.VirtualIntersectionsViewStyle: Returns the value of adjacent blends end gaps.
adjacentBlendsEndGapsData() - Method in interface nxopen.preferences.VirtualIntersectionsViewPreferences: Returns the value of adjacent blends end gaps.
adjacentBlendsFont() - Method in interface nxopen.drawings.VirtualIntersectionsViewStyle: Returns the font of adjacent blends.
adjacentBlendsFont() - Method in interface nxopen.preferences.VirtualIntersectionsViewPreferences: Returns the font of adjacent blends.
adjacentBlendsWidth() - Method in interface nxopen.drawings.VirtualIntersectionsViewStyle: Returns the width of adjacent blends.
adjacentBlendsWidth() - Method in interface nxopen.preferences.VirtualIntersectionsViewPreferences: Returns the width of adjacent blends.
AdjacentFaceMethod - Interface in nxopen.cae: Represents the output from the adjacent face smart selector method
To obtain an instance of this class use CAE::SmartSelectionManager
.
adjacentFacetId - Variable in class nxopen.uf.UFFacet.AskAdjacentFacetData
adjacentVec - Variable in class nxopen.uf.UFModl.MatchedgeData
adjreg() - Method in interface nxopen.cam.RotateToolMoveBuilder: Returns the Adjust register
License requirements: None.
adjReg() - Method in interface nxopen.cam.WireTool: Returns the Adjust Register
License requirements: None.
adjregToggle() - Method in interface nxopen.cam.RotateToolMoveBuilder: Returns the Adjust register Toggle Status
License requirements: None.
ADJUST - Static variable in class nxopen.cae.ProjectNodesToCadGeometryBuilder.Operation: Adjust nodes that are off the geometry by more than the input tolerance by projecting them on to the CAD geometry
adjust - Variable in class nxopen.cam.MillingTrackpointBuilder.Data: the adjust
adjust - Variable in class nxopen.cam.MillingTrackpointBuilder.TrackPointData: the adjust
ADJUST - Static variable in class nxopen.tooling.DieBaseBuilder.DesignToolOption: adjust length of sub die base
adjust - Variable in class nxopen.uf.UFCutter.TrackingPointData
adjust - Variable in class nxopen.uf.UFCutter.TurnTrackingPointData
ADJUST_LENGTH - Static variable in class nxopen.tooling.EjectorPostProcessingBuilder.TrimMethod: Adjust Length
ADJUSTABLE - Static variable in class nxopen.HumanPosturePredictionBuilder.SeatType: Indicate adjustable seat
adjustBoundaryChannel() - Method in interface nxopen.tooling.CoolingDefineChannelBuilder: Returns the flag to indicate whether to extend boundary channel or not
License requirements: None.
adjustBoundaryChannel() - Method in interface nxopen.tooling.CoolingExtendBuilder: Returns the value which specifies whether to extend boundary channel or not.
ADJUSTED_VELOCITY - Static variable in class nxopen.cae.Result.Quantity
adjustedNodeLocationColor() - Method in interface nxopen.cae.ProjectNodesToCadGeometryBuilder: Returns the display color of proximity node new location which will meet the given tolerance with undelying CAD geometry.
adjustedPlateLength() - Method in interface nxopen.tooling.DieBaseBuilder: Returns the plate length value.
adjustedThickness() - Method in interface nxopen.die.RibChildBuilder: Returns the adjusted thickness of the die rib.
adjustedThickness() - Method in interface nxopen.die.RibParentBuilder: Returns the adjusted thickness of die ribs.
adjustFastenerLength(int, int, FastenerAssy.StackTypeMethod) - Method in interface nxopen.tooling.FastenerAssy: Adjusts the fastener assembly length
License requirements: None.
adjustFeedRateOption() - Method in interface nxopen.cam.CornerControlBuilder: Returns the adjust feed rate option
License requirements: None.
adjustFlag - Variable in class nxopen.uf.UFPath.Cutcom
adjustFlag - Variable in class nxopen.uf.UFPath.ToolChange
adjustment() - Method in interface nxopen.cam.ProbeControlParametersBuilder: Returns the output adjustment option
License requirements: None.
adjustmentMode() - Method in interface nxopen.cam.TurnRoughFinishLocalReturnBuilder: Returns the adjustment mode mode
License requirements: None.
adjustMethod() - Method in interface nxopen.tooling.ChannelAdjustBuilder: Returns the method for adjusting the cooling channels.
adjustProximityNodes() - Method in interface nxopen.cae.ProjectNodesToCadGeometryBuilder: Adjusts the proximity nodes identified to the new location to meet the given tolerance with underlying CAD geometries.
adjustreg - Variable in class nxopen.cam.TrackingBuilder.Data: the adjust register
adjustRegister() - Method in interface nxopen.cam.ToolChangeCiBuilder: Returns the Tool adjust register builder
License requirements: None.
adjustRegister() - Method in interface nxopen.sim.KinematicComponentBuilder: Returns the adjust register
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
adjustRegister - Variable in class nxopen.uf.UFPath.Cutcom
adjustRegister - Variable in class nxopen.uf.UFPath.ToolChange
adjustRegister - Variable in class nxopen.uf.UFPath.TrackingPointChange
adjustRegisterToggle() - Method in interface nxopen.cam.ToolChangeCiBuilder: Returns the Tool adjust register toggle
License requirements: None.
adjustRegisterType() - Method in interface nxopen.sim.KinematicComponentBuilder: Returns the adjust register type
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
adjustShapeBoundary() - Method in interface nxopen.facet.DetectPrimitivesBuilder: Adjust shape detection result with selectivity angle
License requirements: None.
adjustStatus - Variable in class nxopen.uf.UFCutter.TrackingPointData
adjustused - Variable in class nxopen.cam.MillingTrackpointBuilder.Data: the adjust toggle
adjustused - Variable in class nxopen.cam.MillingTrackpointBuilder.TrackPointData: the adjust toggle
adjustVector() - Method in interface nxopen.tooling.ChannelAdjustBuilder: Returns the vector specified for the adjust direction.
administrationBypass() - Method in interface nxopen.pdm.SessionSettings: Returns a flag controlling the Teamcenter administrator's bypass option.
administrationLogging() - Method in interface nxopen.pdm.SessionSettings: Returns a flag controlling Teamcenter administration logging.
AdmMoveFace - Interface in nxopen.features: Represents a ADM Move Face feature
To create or edit an instance of this class, use AdmMoveFaceBuilder

Created in NX6.0.0
AdmMoveFaceBuilder - Interface in nxopen.features: Represents a AdmMoveFace builder
To create a new instance of this class, use FeatureCollection.createAdmMoveFaceBuilder(nxopen.features.AdmMoveFace)
Default values.
AdmMoveFaceBuilder.MoveOptionType - Class in nxopen.features: Represents the move option.
AdmOffsetRegion - Interface in nxopen.features: Represents a linear dimension feature
To create or edit an instance of this class, use AdmOffsetRegionBuilder

Created in NX6.0.0
AdmOffsetRegionBuilder - Interface in nxopen.features: Represents a AdmOffsetRegion builder
To create a new instance of this class, use FeatureCollection.createAdmOffsetRegionBuilder(nxopen.features.AdmOffsetRegion)
Default values.
AdmResizeFace - Interface in nxopen.features: Represents an ADM resize face feature
To create or edit an instance of this class, use AdmResizeFaceBuilder

Created in NX6.0.0
AdmResizeFaceBuilder - Interface in nxopen.features: Represents a builder for a resize face feature.
ADOPT - Static variable in class nxopen.features.shipdesign.PlateBuilder.Types: Adopts plate body.
ADOPT_EDGE_REINFORCEMENT - Static variable in class nxopen.features.shipdesign.StiffenerBuilder.Types: Adoption Edge Reinforcement type
ADOPT_STIFFENER - Static variable in class nxopen.features.shipdesign.StiffenerBuilder.Types: Adoption Stiffener type
AdoptableTypes() - Constructor for class nxopen.RuleManager.AdoptableTypes
AdoptableTypes(int, int, int) - Constructor for class nxopen.RuleManager.AdoptableTypes: Constructor for the AdoptableTypes object.
adoptedDesignBody() - Method in interface nxopen.features.shipdesign.DvToMvMappingBuilder: Returns the adopted design body.
adoptedMfgBody() - Method in interface nxopen.features.shipdesign.DvToMvMappingBuilder: Returns the adopted manufacturing body.
ADOPTION - Static variable in class nxopen.features.shipdesign.PillarBuilder.CreationMethod
ADOPTION - Static variable in class nxopen.features.shipdesign.StandardPartFrameworkBuilder.CreationType: In adoption
adoptionAnchorPointList() - Method in interface nxopen.features.shipdesign.StiffenerBuilder: Returns the adoption anchor point list.
adoptionBaseFaces() - Method in interface nxopen.features.shipdesign.StiffenerBuilder: Returns the adoption base faces.
adoptionBodies() - Method in interface nxopen.features.shipdesign.PlateBuilder: Returns the adoption bodies, which are used to create multiple plates.
adoptionBodies() - Method in interface nxopen.features.shipdesign.StiffenerBuilder: Returns the adoption bodies, which are used to create multiple adoption stiffeners.
adoptionBodiesMoldFace() - Method in interface nxopen.features.shipdesign.PlateBuilder: Returns the mold face of adoption bodies.
adoptionBody() - Method in interface nxopen.features.shipdesign.PillarBuilder: Returns the adoption body (only used with "JA_PILLAR_BUILDER_CreationMethod_AdoptionBody" creation method).
adoptionEndCutFaces1() - Method in interface nxopen.features.shipdesign.StiffenerBuilder: Returns the adoption end cut 1 faces.
adoptionEndCutFaces2() - Method in interface nxopen.features.shipdesign.StiffenerBuilder: Returns the adoption end cut 2 faces.
adoptionMoldFaces() - Method in interface nxopen.features.shipdesign.StiffenerBuilder: Returns the adoption mold faces.
adoptionOpposingMoldFaces() - Method in interface nxopen.features.shipdesign.StiffenerBuilder: Returns the adoption opposing mold faces.
adoptionTopFaces() - Method in interface nxopen.features.shipdesign.StiffenerBuilder: Returns the adoption top faces.
adoptNxObjects(Tag[], int, boolean) - Method in interface nxopen.uf.UFKf: Refer to UF_KF_adopt_nx_objects for documentation.
adoptObject(NXObject) - Method in interface nxopen.optimization.DesignStudyAttributeBuilder: Adopt object
License requirements: None.
adoptObject(NXObject) - Method in interface nxopen.optimization.OptimizationAttributeBuilder: Adopt object
License requirements: None.
adoptObjects(NXObject[]) - Method in interface nxopen.RuleManager: Adopt the specified ug objects.
adoptUgObjects(Tag[], int) - Method in interface nxopen.uf.UFKf: Refer to UF_KF_adopt_ug_objects for documentation.
adOutPoint - Variable in class nxopen.uf.UFSf.EdgeEvaluateClosestPointData
ADR42 - Static variable in class nxopen.features.vehicledesign.WheelCoveringBuilder.SurfaceSectionType: The checking surface is created as ADR 42 type
adultHic1000Angle() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder: Returns the angle to translate the adult HIC (Head Injury Criterion) 1000 impact sheet and grid.
adultHic1000Offset() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder: Deprecated.
Deprecated in NX9.0.0. The offset value will be retrieved from the physical material property.
adultHic1000OutputColor() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder: Returns the color that will be used for the adult HIC (Head Injury Criterion) 1000 impact sheet.
adultHic1000OutputFont() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder: Returns the font that will be used for the adult HIC (Head Injury Criterion) 1000 impact sheet.
adultHic1000OutputLayer() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder: Returns the layer that will be used for the adult HIC (Head Injury Criterion) 1000 impact sheet.
adultHic1000OutputWidth() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder: Returns the line width that will be used for the adult HIC (Head Injury Criterion) 1000 impact sheet.
adultHic1700Angle() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder: Returns the angle to translate the adult HIC (Head Injury Criterion) 1700 impact sheet and grid.
adultHic1700Offset() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder: Deprecated.
Deprecated in NX9.0.0. The offset value will be retrieved from the physical material property.
adultHic1700OutputColor() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder: Returns the color that will be used for the adult HIC (Head Injury Criterion) 1700 impact sheet.
adultHic1700OutputFont() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder: Returns the font that will be used for the adult HIC (Head Injury Criterion) 1700 impact sheet.
adultHic1700OutputLayer() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder: Returns the layer that will be used for the adult HIC (Head Injury Criterion) 1700 impact sheet.
adultHic1700OutputWidth() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder: Returns the line width that will be used for the adult HIC (Head Injury Criterion) 1700 impact sheet.
ADVANCE_OFF - Static variable in class nxopen.features.StudioXformBuilder.AdvancedMethodType: Deprecated.

Turn off advanced methods
ADVANCE_OFF - Static variable in class nxopen.features.StudioXformBuilderEx.AdvancedMethodType: Deprecated.

Turn off advanced methods
advanceAngle() - Method in interface nxopen.cam.InspectionMethodBuilder: Returns the advance angle (degrees)
License requirements: None.
ADVANCED - Static variable in class nxopen.cam.OperationBuilder.OptimizationLevelTypes: advanced
ADVANCED - Static variable in class nxopen.features.BridgeCurveBuilder.CurveFitTypes: Deprecated.

general fit curve
ADVANCED - Static variable in class nxopen.features.JoinCurvesBuilder.OutputCurve: Advanced output curve
ADVANCED - Static variable in class nxopen.geometricutilities.CurveFitOptions.FitMethod: Advanced
ADVANCED - Static variable in class nxopen.geometricutilities.Rebuild.RebuildTypes: Specify the maximum degree and maximum segments to rebuild.
advanced(String[], String[]) - Method in interface nxopen.pdm.PdmSearch: This API performs advanced search in the teamcenter and returns the result vector .Internally it will execute the NX standard Query "__NX_STD_ANY_ITEM_QUERY".
ADVANCED - Static variable in class nxopen.preferences.SessionModeling.CurveFitMethodType: Indicates the Curve Fit Method type is advanced
advanced - Variable in class nxopen.uf.UFMotion.Motion2DContact
advanced - Variable in class nxopen.uf.UFMotion.Motion3DContact
ADVANCED_OFF - Static variable in class nxopen.features.StudioXformBuilderEx.AdvancedMethodOptionType: No advanced methods
ADVANCED_TRIMMING - Static variable in class nxopen.features.MidSurfaceByFacePairsBuilder.TrimmingOptionType: Advanced trimming
ADVANCED_UNFORM - Static variable in class nxopen.bodydes.OnestepUnformBuilder.Process: spring back
advancedMaterial() - Method in interface nxopen.JtCreator: Returns the advancedMaterial *- Specifies whether advanced material and light information to be written in JT
License requirements: None.
advancedMethod() - Method in interface nxopen.features.StudioXformBuilder: Deprecated.
Deprecated in NX8.5.0. Use StudioXformBuilderEx instead.
advancedMethod() - Method in interface nxopen.features.StudioXformBuilderEx: Deprecated.
Deprecated in NX8.5.0. Use StudioXformBuilderEx.advancedMethodOption() instead.
advancedMethodOption() - Method in interface nxopen.features.StudioXformBuilderEx: Returns the advanced method
License requirements: None.
advancedPlot() - Method in interface nxopen.PlotBuilder: Initialize the SDI dialog.
advancedVisViewAngleTolerance() - Method in interface nxopen.preferences.PartVisualizationShade: Deprecated.
Deprecated in NX8.0.0. Use PartVisualizationShade.getAdvVisViewFacetTolerances(nxopen.preferences.PartVisualizationShade.AdvViewToleranceType) and PartVisualizationShade.setAdvVisViewFacetTolerances(nxopen.preferences.PartVisualizationShade.AdvViewToleranceType, double, double, double, double) instead.
advancedVisViewEdgeTolerance() - Method in interface nxopen.preferences.PartVisualizationShade: Deprecated.
Deprecated in NX8.0.0. Use PartVisualizationShade.getAdvVisViewFacetTolerances(nxopen.preferences.PartVisualizationShade.AdvViewToleranceType) and PartVisualizationShade.setAdvVisViewFacetTolerances(nxopen.preferences.PartVisualizationShade.AdvViewToleranceType, double, double, double, double) instead.
advancedVisViewFaceTolerance() - Method in interface nxopen.preferences.PartVisualizationShade: Deprecated.
Deprecated in NX8.0.0. Use PartVisualizationShade.getAdvVisViewFacetTolerances(nxopen.preferences.PartVisualizationShade.AdvViewToleranceType) and PartVisualizationShade.setAdvVisViewFacetTolerances(nxopen.preferences.PartVisualizationShade.AdvViewToleranceType, double, double, double, double) instead.
advancedVisViewTolerance() - Method in interface nxopen.preferences.PartVisualizationShade: Returns the tolerance for advanced visualization views.
advancedVisViewUpdateMode() - Method in interface nxopen.preferences.PartVisualizationShade: Returns the update mode for advanced visualization views.
advancedVisViewWidthTolerance() - Method in interface nxopen.preferences.PartVisualizationShade: Deprecated.
Deprecated in NX8.0.0. Use PartVisualizationShade.getAdvVisViewFacetTolerances(nxopen.preferences.PartVisualizationShade.AdvViewToleranceType) and PartVisualizationShade.setAdvVisViewFacetTolerances(nxopen.preferences.PartVisualizationShade.AdvViewToleranceType, double, double, double, double) instead.
advCompression() - Method in interface nxopen.ListCreator: Returns the m_advCompression * - Specifies the advanced compression for Defined Level of Detail
License requirements: None.
advVisAlignFacets() - Method in interface nxopen.display.FacetSettingsBuilder: Returns the state of whether facets for advanced visualization views should be aligned along common edges.
advVisFacetRatio() - Method in interface nxopen.display.FacetSettingsBuilder: Deprecated.
Deprecated in NX9.0.0. Refer to FacetSettingsBuilder.advVisRefinementFactor() instead
advVisFacetScale() - Method in interface nxopen.display.FacetSettingsBuilder: Returns the facet scale to use for Advanced Visualization Views
License requirements: None.
advVisFacetScaleRatio() - Method in interface nxopen.preferences.PartVisualizationShade: Deprecated.
Deprecated in NX9.0.0. Refer to Display.FacetSettingsBuilder#advVisRefinementFactor instead
advVisFacetToViewRatio() - Method in interface nxopen.display.FacetSettingsBuilder: Deprecated.
Deprecated in NX9.0.0. Refer to FacetSettingsBuilder.advVisFacetScale() instead
advVisFacetToViewScale() - Method in interface nxopen.preferences.PartVisualizationShade: Deprecated.
Deprecated in NX9.0.0. Refer to Display.FacetSettingsBuilder#advVisFacetScale instead
advVisRefinementFactor() - Method in interface nxopen.display.FacetSettingsBuilder: Returns the refinement factor to use for Advanced Visualization Views
License requirements: None.
advVisTolerance() - Method in interface nxopen.display.FacetSettingsBuilder: Returns the tolerance setting to use for Advanced Visualization Views
License requirements: None.
advVisUpdate() - Method in interface nxopen.display.FacetSettingsBuilder: Returns the update mode to use for Advanced Visualization Views
License requirements: None.
AdvVisViewFacetTolerancesData() - Constructor for class nxopen.preferences.PartVisualizationShade.AdvVisViewFacetTolerancesData
AERIAL - Static variable in class nxopen.die.PierceTaskBuilder.CamTypes: Aerial Cam
AERIAL - Static variable in class nxopen.die.TrimTaskBuilder.CamTypes: Aerial Cam
AERIAL_CAM - Static variable in class nxopen.tooling.DieEngTrimTaskBuilder.TrimTaskCamType
AERIAL_CONVENTIONAL - Static variable in class nxopen.die.FlangeTaskBuilder.CamTypes: Aerial Cam - Conventional Fill
AERIAL_ROTARY - Static variable in class nxopen.die.FlangeTaskBuilder.CamTypes: Aerial Cam - Rotary Fill
AERO_SHEETMETAL - Static variable in class nxopen.FileNewApplication: Deprecated.

Specifies an Aerospace sheet metal template
AeroCollection - Interface in nxopen.features: This class contains the factory method for creating aero design feature builder.
aeroCollection() - Method in interface nxopen.features.FeatureCollection: Returns the AeroCollection instance belonging to this part .
AeroFlange - Interface in nxopen.features: Represents a flange feature
To create or edit an instance of this class, use AeroFlangeBuilder

Created in NX10.0.0
AeroFlangeBuilder - Interface in nxopen.features: Represents a AeroFlange builder
To create a new instance of this class, use AeroCollection.createAeroFlangeBuilder(nxopen.features.AeroFlange)
Default values.
AeroFlangeBuilder - Interface in nxopen.features.sheetmetal: Represents a Aerospace Sheet Metal Flange Builder.
AeroFlangeBuilder.CompType - Class in nxopen.features.sheetmetal: This method defines the types of Flange Compensation
AeroFlangeBuilder.DimType - Class in nxopen.features.sheetmetal: This enum defines the flange length dimension types
AeroFlangeBuilder.DirType - Class in nxopen.features.sheetmetal: This enum defines the type of direction vector
AeroFlangeBuilder.EndCompensationData - Class in nxopen.features.sheetmetal: This class holds the data returned from AeroFlangeBuilder.getEndCompensation(nxopen.features.sheetmetal.AeroFlangeBuilder.EndType)
AeroFlangeBuilder.EndType - Class in nxopen.features.sheetmetal: This enum defines the ends of a bend edge
AeroFlangeBuilder.GuideObjectTypes - Class in nxopen.features: This attribute represents the Guide Object types
AeroFlangeBuilder.LengthData - Class in nxopen.features.sheetmetal: This class holds the data returned from AeroFlangeBuilder.getLength()
AeroFlangeBuilder.LengthType - Class in nxopen.features.sheetmetal: This enum defines the length type options.
AeroFlangeBuilder.LimitObjectTypes - Class in nxopen.features: This attribute represents the limit object types
AeroFlangeBuilder.MatType - Class in nxopen.features.sheetmetal: This enum defines the material types
AeroFlangeBuilder.ThicknessDimensionOptions - Class in nxopen.features: This attribute represents the options for thickness dimension
AeroFlangeBuilder.WidthDimensionOptions - Class in nxopen.features: This attribute represents the options for width dimension
AeroFlangeBuilder.WidthMethods - Class in nxopen.features: This attribute represents the width method
AeroFlatPatternBuilder - Interface in nxopen.features.sheetmetal: Represents a Flat Pattern feature builder.
AeroFlatSolidBuilder - Interface in nxopen.features.sheetmetal: Represents a Flat As Solid feature builder.
AeroJoggleBuilder - Interface in nxopen.features.sheetmetal: Represents a Aerospace Sheet Metal Joggle Builder.
AeroJoggleBuilder.SideType - Class in nxopen.features.sheetmetal: This enum defines the side of a twin joggle only side1 is used for a single joggle
AeroLighteningCutoutBuilder - Interface in nxopen.features.sheetmetal: Represents a AeroLighteningCutoutBuilder
To create a new instance of this class, use AeroSheetmetalManager.createAeroLighteningCutoutBuilder(nxopen.features.Feature)
Default values.
AeroLighteningCutoutBuilder.Types - Class in nxopen.features.sheetmetal: Represents the cutout type.
AeroReformBuilder - Interface in nxopen.features.sheetmetal: Represents a Aerospace Sheet Metal REFORM Builder.
AeroRib - Interface in nxopen.features: Represents a aero rib feature
To create or edit an instance of this class, use AeroRibBuilder

Created in NX10.0.0
AeroRibBuilder - Interface in nxopen.features: Represents a AeroRib builder
To create a new instance of this class, use AeroCollection.createAeroRibBuilder(nxopen.features.AeroRib)
Default values.
AeroRibBuilder.GuideObjectTypes - Class in nxopen.features: This attribute represents the Guide Object types
AeroRibBuilder.HeightDimensionOptions - Class in nxopen.features: This attribute represents the options for height dimension
AeroRibBuilder.LimitObjectTypes - Class in nxopen.features: This attribute represents the limit object types
AeroRibBuilder.ThicknessDimensionOptions - Class in nxopen.features: This attribute represents the options for thickness dimension
aeroSheetmetalManager() - Method in interface nxopen.features.FeatureCollection: Returns the aerospace sheet metal manager for this part .
AeroSheetmetalManager - Interface in nxopen.features.sheetmetal: Provides methods for manipulating the Knowledge Fusion rules in a part
To obtain an instance of this class, refer to FeatureCollection

Created in NX4.0.0
AEROSPACE_SHEET_METAL - Static variable in class nxopen.features.sheetmetal.ApplicationContext: Aerospace Sheet Metal application context
AeroUnformBuilder - Interface in nxopen.features.sheetmetal: Represents a Aerospace Sheet Metal UNFORM Builder.
AestheticFaceBlend - Interface in nxopen.features: Represents an aesthetic face blend feature
To create or edit an instance of this class, use AestheticFaceBlendBuilder

Created in NX7.5.0
AestheticFaceBlendBuilder - Interface in nxopen.features: This class will provide ability to create aesthetically pleasing blend surfaces on sheet and solid bodies.
AestheticFaceBlendBuilder.AlignmentType - Class in nxopen.features: Alignment method provides the ability to align the cross sections of the blend in the user specified direction
AestheticFaceBlendBuilder.BlendFacesType - Class in nxopen.features: Trimming options
AestheticFaceBlendBuilder.BlendType - Class in nxopen.features: Tangent method will create tangent lines based on the method employed.
AestheticFaceBlendBuilder.CenterType - Class in nxopen.features: Center methods will define peak of the blend
AestheticFaceBlendBuilder.EndTrimObjectType - Class in nxopen.features: End object overriding trim options
AestheticFaceBlendBuilder.RhoType - Class in nxopen.features: Rho options
AestheticFaceBlendBuilder.SegmentationType - Class in nxopen.features: Segmentations options
AestheticFaceBlendBuilder.ShapeType - Class in nxopen.features: Shape methods will define the high level shape of the blend cross section.
AestheticFaceBlendBuilder.StartTrimObjectType - Class in nxopen.features: Start object overriding trim options
AF - Static variable in class nxopen.cae.responsesimulation.RSEventSolverParameters.DdamCoefficientType
AF - Static variable in class nxopen.features.shipdesign.SectionViewBuilder.DirectionOptions
affineComb(double[], double, double[]) - Method in interface nxopen.uf.UFVec2: Refer to UF_VEC2_affine_comb for documentation.
affineComb(double[], double, double[]) - Method in interface nxopen.uf.UFVec3: Refer to UF_VEC3_affine_comb for documentation.
affirmReusableComponent() - Method in interface nxopen.tooling.AddReusablePart: Affirms insertion of the reusable component
License requirements: None.
AFT - Static variable in class nxopen.cae.Result.BeamEnd: Aft end
AFT - Static variable in class nxopen.features.shipdesign.ShipCoordinatesBuilder.XDirectionType
AFT - Static variable in class nxopen.features.shipdesign.StandardPartItemBuilder.Direction: aft
AFT_PERPENDICULAR - Static variable in class nxopen.annotations.FrameBarElements
AFT_STBD_FR_OUT_CTR - Static variable in class nxopen.features.shipdesign.PlateSystemBuilder.StiffenerDirectionType: Direction is Aft, Starboard, From Reference, Outside or Centered.
AFT_STBD_FR_OUT_DN - Static variable in class nxopen.features.shipdesign.PlateSystemBuilder.StiffenerDirectionType: Direction is Aft, Starboard, From Reference, Outside or Down.
AFT_STBD_OUT_DN - Static variable in class nxopen.features.shipdesign.ThicknessDirectionBuilder.ThicknessDirectionType: Direction is Aft, Starboard, Outside or Down.
AFTER - Static variable in class nxopen.annotations.DiameterRadiusSymbolPlacement: Specifies diameter/radius symbol is placed after dimension text
AFTER - Static variable in class nxopen.annotations.DualDimensionPlacement: Specifies dual dimension after primary dimension
AFTER - Static variable in class nxopen.annotations.TolerancePlacement: Specifies tolerance after dimension text
AFTER - Static variable in class nxopen.blockstyler.SetList.InsertionLocation
AFTER - Static variable in class nxopen.cae.SimSolution.StepPosition: after the specified step
AFTER - Static variable in class nxopen.cam.CAMSetup.Paste: paste after
AFTER - Static variable in class nxopen.drawings.ScalePositionTypes
AFTER - Static variable in class nxopen.features.FeatureCollection.ReorderType
AFTER - Static variable in class nxopen.mechatronics.SystemObject.ReorderType: After
AFTER - Static variable in class nxopen.MeshProfileString.InsertOrder
AFTER - Static variable in class nxopen.tooling.MotionSimulationBuilder.EjectorMoveOptions: Eject product after mold fully opened
AFTER - Static variable in class nxopen.uf.UFGdt.TextLocation
AFTER_ALL_CONSTRAINT - Static variable in class nxopen.geometricutilities.SupportPlaneData.LockPlaneStatus: Lock after all constraint
AFTER_CONTAINMENT - Static variable in class nxopen.cam.RoughFinishTurningBuilder.ToleranceOffsetTypes: Tolerance offset after containment.
AFTER_CONTAINMENT - Static variable in class nxopen.cam.TurnFeatureGeomBuilder.ToleranceOffsetModes: Tolerance offset after containment.
AFTER_FIRST_AND_SECOND_CONSTRAINT - Static variable in class nxopen.geometricutilities.SupportPlaneData.LockPlaneStatus: Lock after first and second constraint
AFTER_FIRST_AND_THIRD_CONSTRAINT - Static variable in class nxopen.geometricutilities.SupportPlaneData.LockPlaneStatus: Lock after first and third constraint
AFTER_FIRST_CONSTRAINT - Static variable in class nxopen.geometricutilities.SupportPlaneData.LockPlaneStatus: Lock after first constraint
AFTER_LEAD_IN - Static variable in class nxopen.cam.NcmWedmBuilder.CutcomOnTypes: cutcom on after lead in
AFTER_LEAD_OUT - Static variable in class nxopen.cam.NcmWedmBuilder.CutcomOffTypes: cutcom off after lead out
AFTER_MODELING - Static variable in class nxopen.SmartObject.UpdateOption: Updates after modeling (e.g. a dimension).
AFTER_PARENT_BODY - Static variable in class nxopen.SmartObject.UpdateOption: Updates after the parent body.
AFTER_SECOND_AND_THIRD_CONSTRAINT - Static variable in class nxopen.geometricutilities.SupportPlaneData.LockPlaneStatus: Lock after second and third constraint
AFTER_SECOND_CONSTRAINT - Static variable in class nxopen.geometricutilities.SupportPlaneData.LockPlaneStatus: Lock after second constraint
AFTER_STUB - Static variable in class nxopen.annotations.NarrowDisplayOption: Displays narrow dimension after stub
AFTER_STUB - Static variable in class nxopen.annotations.TextPosition: Specifies text position after stub
AFTER_THIRD_CONSTRAINT - Static variable in class nxopen.geometricutilities.SupportPlaneData.LockPlaneStatus: Lock after third constraint
afterName() - Method in interface nxopen.PartReopenStatus: Returns the name of the part after it was reopened.
afterText() - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder: Returns the after text
License requirements: None.
afterTextType() - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder: Returns the after text enum
License requirements: None.
aftLimitPlane() - Method in interface nxopen.features.shipdesign.ShellExpansionBuilder: Returns the aft limit plane
License requirements: None.
aftOffset() - Method in interface nxopen.cae.BeamSectionOffsetOptions: Returns the aft offsets
License requirements: None.
aftPerpendicular() - Method in interface nxopen.annotations.BaseFrameBarBuilder: Returns the aft perpendicular
License requirements: None.
aftPerpendicular() - Method in interface nxopen.features.shipdesign.MainDimensionsBuilder: Returns the expression containing the position value of Aft Perpendicular along the X axis.
aftPerpendicularLabelColor() - Method in interface nxopen.annotations.FrameBarPreferences: Returns the label color
License requirements: None.
aftPerpendicularLabelFont() - Method in interface nxopen.annotations.FrameBarPreferences: Returns the label font
License requirements: None.
aftPerpendicularLabelItalicized() - Method in interface nxopen.annotations.FrameBarPreferences: Returns the label italicized
License requirements: None.
aftPerpendicularLabelWidth() - Method in interface nxopen.annotations.FrameBarPreferences: Returns the label width
License requirements: None.
aftPerpendicularStyle() - Method in interface nxopen.annotations.FrameBarStyleBuilder: Returns the style aft perpendicular
License requirements: None.
aftPerpendicularTicColor() - Method in interface nxopen.annotations.FrameBarPreferences: Returns the tic color
License requirements: None.
aftPerpendicularTicDisplay() - Method in interface nxopen.annotations.FrameBarPreferences: Returns the aft perpendicular tic display type
License requirements: None.
aftPerpendicularTicFont() - Method in interface nxopen.annotations.FrameBarPreferences: Returns the tic font
License requirements: None.
aftPerpendicularTicLength() - Method in interface nxopen.annotations.FrameBarPreferences: Returns the tic length
License requirements: None.
aftPerpendicularTicWidth() - Method in interface nxopen.annotations.FrameBarPreferences: Returns the tic width
License requirements: None.
aftPlane() - Method in interface nxopen.features.shipdesign.ExpansionDrawingBuilder: Returns the aft plane
License requirements: None.
AFU - Static variable in class nxopen.cae.DurabilityStrainGageAnalyzerBuilder.GageSourceEnum: Afu
AFU - Static variable in class nxopen.cae.Result.Filetype
AfuAbscissaHeaderInfo - Interface in nxopen.cae: Represents the data to define abscissa header information for an afu record .
afuAbscissaHeaderInfo() - Method in interface nxopen.cae.AfuData: Returns the abscissa header information data of the AFU Data Record
License requirements: nx_ftk ("NX Advanced Graphing")
.
AfuData - Interface in nxopen.cae: the data used to create an AFU Data Record .
afuData - Variable in class nxopen.cae.AfuManager.AfuRecordData: AFU record data queried
AfuData.AbscissaAndOrdinateAxisDefinitionData - Class in nxopen.cae: This class holds the data returned from AfuData.getAbscissaAndOrdinateAxisDefinition()
AfuData.AbscissaType - Class in nxopen.cae: Defines abscissa data type for AFU data record
AfuData.AxisDefinitionData - Class in nxopen.cae: This class holds the data returned from AfuData.getAxisDefinition()
AfuData.ComplexData - Class in nxopen.cae: This class holds the data returned from AfuData.getComplexData()
AfuData.EvenData - Class in nxopen.cae: This class holds the data returned from AfuData.getEvenData()
AfuData.IdInformationData - Class in nxopen.cae: This class holds the data returned from AfuData.getIdInformation()
AfuData.OrdinateType - Class in nxopen.cae: Defines ordinate data type for AFU data record
AfuData.RealData - Class in nxopen.cae: This class holds the data returned from AfuData.getRealData()
AfuDataConvertor - Interface in nxopen.cae: Convert data values for the AFU Data Record
To obtain an instance of this class, refer to AfuManager

Created in NX5.0.0
afuDataConvertor() - Method in interface nxopen.cae.AfuManager: Contains FFT operations for AFU data .
AfuDataConvertor.Fft - Class in nxopen.cae: Defines the way of FFT on AFU Data Record
AfuDataConvertor.FftFrequencyData - Class in nxopen.cae: This class holds the data returned from AfuDataConvertor.getFftFrequencyData(double[], double[])
AfuDataConvertor.FftTimeData - Class in nxopen.cae: This class holds the data returned from AfuDataConvertor.getFftTimeData(double[], double[], double[])
afuFile() - Method in interface nxopen.motion.GraphBuilder: Returns the afu file name
License requirements: mechanisms ("MECHANISMS")
.
afuFunction() - Method in interface nxopen.cae.DurabilityEvaluateFatigueHistoryBuilder: The function is called when the user click the button of Export to AFU Funciton
License requirements: nx_adv_durability ("NX Advanced Durability")
.
afuHeaderId() - Method in interface nxopen.cae.AfuData: Returns the AFU Header Id data of the AFU Data Record
License requirements: nx_ftk ("NX Advanced Graphing")
.
AfuHeaderId - Interface in nxopen.cae: the data used to create header id information for an AFU Data Record .
AfuManager - Interface in nxopen.cae: AFU File and Data Record Manager
To obtain an instance of this class, refer to Session

Created in NX4.0.0
afuManager() - Method in interface nxopen.Session: Returns the AfuManager belonging to this session
Created in NX3.0.0
AfuManager.AfuRecordData - Class in nxopen.cae: This class holds the data returned from AfuManager.getAfuData(java.lang.String, int)
AfuManager.WritingFileMode - Class in nxopen.cae: This enumeration defines the modes of outputting information to a file
afuMathOperation() - Method in interface nxopen.cae.AfuManager: Contains Math Operations for AFU data .
AfuMathOperation - Interface in nxopen.cae: Does math operations on the AFU Data Records
To obtain an instance of this class, refer to AfuManager

Created in NX5.0.0
AfuMathOperation.InterpolationMode - Class in nxopen.cae: Defines the interpolation mode
AfuMathOperation.MultiType - Class in nxopen.cae: Defines the type of Multi Math Operations
AfuMathOperation.OuterInterpolation - Class in nxopen.cae: Defines the outer interpolation method
AfuMathOperation.OutputType - Class in nxopen.cae: Defines the output type of new AFU Data Record
AfuMathOperation.Overall - Class in nxopen.cae: Defines the type of Overall Math Operations
AfuMathOperation.SrsToTimeOctave - Class in nxopen.cae: Defines the octave spacing for SRS to TIME
AfuMathOperation.SrsToTimeOption - Class in nxopen.cae: Defines the type of conversion option for SRS to TIME
AfuMathOperation.SrsToTimeStrategy - Class in nxopen.cae: Defines the conversion strategy for SRS to TIME when using the Wavelet method
AfuMathOperation.TimeToSrsAxisType - Class in nxopen.cae: Defines the frequency axis type for TIME to SRS
AfuMathOperation.TimeToSrsResponseType - Class in nxopen.cae: Defines the response type paramater for TIME to SRS
afuOrdinateHeaderInfo() - Method in interface nxopen.cae.AfuData: Returns the ordinate header information data of the AFU Data Record
License requirements: nx_ftk ("NX Advanced Graphing")
.
AfuOrdinateHeaderInfo - Interface in nxopen.cae: Represents the ordinate header information for an afu record .
AfuRecordData() - Constructor for class nxopen.cae.AfuManager.AfuRecordData
afuRecordZValue() - Method in interface nxopen.cae.xyplot.Preference: Returns the Z value type for afu record in 3D plot
License requirements: None.
afuZHeaderInfo() - Method in interface nxopen.cae.AfuData: Returns the Z axis header information data of the AFU Data Record
License requirements: nx_ftk ("NX Advanced Graphing")
.
AfuZHeaderInfo - Interface in nxopen.cae: Represents the Z axis header information for an afu record .
AGRESSIVE - Static variable in class nxopen.cae.optimization.TBSTopologySensitivityOptimizationParameters.DensityUpdate: Agressive strategy
ahpheight() - Method in interface nxopen.features.vehicledesign.ManikinBuilder: Returns the AHP height
License requirements: None.
ahplength() - Method in interface nxopen.features.vehicledesign.ManikinBuilder: Returns the AHP length
License requirements: None.
ahptoSWCHeight() - Method in interface nxopen.features.vehicledesign.ManikinBuilder: Returns the AHP to Steering Wheel Center height.
ahptoSWCLength() - Method in interface nxopen.features.vehicledesign.ManikinBuilder: Returns the AHP to Steering Wheel Center length.
AIR_TIGHT - Static variable in class nxopen.features.shipdesign.PlateBuilder.TightnessOptions
airCylinderParent() - Method in interface nxopen.die.RotorBuilder: Returns the air cylinder parent builder of the rotor.
airTrapOption() - Method in interface nxopen.tooling.FlowDisplayBuilder: Returns the air trap option to be set
License requirements: None.
AKIMA - Static variable in class nxopen.cae.Function.InterpolationMethod: Indicates data calculated by akima interpolation
ALARM - Static variable in class nxopen.cam.ProbeProtectedParametersBuilder.CollisionFlagTypes: PATH OBSTRUCTED alarm
ALBEDO_VIEW_FACTOR - Static variable in class nxopen.cae.Result.Quantity
algorithmChoice() - Method in interface nxopen.cae.PreTestSensorConfigBuilder: Returns the sensor selection algorithm
License requirements: None.
algorithmType() - Method in interface nxopen.optimization.OptimizationBuilder: Returns the algorithm type
License requirements: None.
alias() - Method in interface nxopen.AttributeTemplatesBuilder: Returns the Alias.
alias() - Method in interface nxopen.mechatronics.RuntimeFormulaParameterBuilder: Returns the Alias
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
aliasName - Variable in class nxopen.mechatronics.SignalAdapterBuilder.ParameterData: Alias Name
align() - Method in interface nxopen.drawings.ViewStyleDetailBuilder: Returns the align toggle on the DETAIL tab of the View Style Dialog
License requirements: None.
align() - Method in interface nxopen.drawings.ViewStyleProjectedBuilder: Returns the projected view style align toggle on the PROJECTED tab of the View Style Dialog
License requirements: None.
align() - Method in interface nxopen.drawings.ViewStyleSectionConstraintsBuilder: Returns the align toggle on the SECTION CONSTRAINTS tab of the View Style Dialog
License requirements: None.
ALIGN - Static variable in class nxopen.features.MatchEdgeBuilder.MatchExact: Match align without change degree and patch
ALIGN - Static variable in class nxopen.tooling.DieBaseBuilder.DesignToolOption: align sub die base
ALIGN_AXIS_TO_VECTOR - Static variable in class nxopen.formboard.OrientBranchBuilder.BranchAngleMethod: method to rotate branch by an angle between two vectors
ALIGN_AXIS_VECTOR - Static variable in class nxopen.geometricutilities.ModlMotion.Options: Move by Align Axis to Vector
ALIGN_BOTTOM_CENTER - Static variable in class nxopen.uf.UFDrf.AlignPosition
ALIGN_BOTTOM_LEFT - Static variable in class nxopen.uf.UFDrf.AlignPosition
ALIGN_BOTTOM_RIGHT - Static variable in class nxopen.uf.UFDrf.AlignPosition
ALIGN_LOCK - Static variable in class nxopen.positioning.Constraint.Type: Two geometries are constrained to have a common axis and no rotation about it
ALIGN_MID_CENTER - Static variable in class nxopen.uf.UFDrf.AlignPosition
ALIGN_MID_LEFT - Static variable in class nxopen.uf.UFDrf.AlignPosition
ALIGN_MID_RIGHT - Static variable in class nxopen.uf.UFDrf.AlignPosition
ALIGN_NORMAL - Static variable in class nxopen.features.subdivision.SubdivisionProjectCageBuilder.Types: Align edges normal to the specified plane
ALIGN_TO_EDGES - Static variable in class nxopen.cam.ToolAxisVariable.Types: Align to almost straight edges
ALIGN_TOP_CENTER - Static variable in class nxopen.uf.UFDrf.AlignPosition
ALIGN_TOP_LEFT - Static variable in class nxopen.uf.UFDrf.AlignPosition
ALIGN_TOP_RIGHT - Static variable in class nxopen.uf.UFDrf.AlignPosition
ALIGN_VECTORS - Static variable in class nxopen.cae.NodeTranslateBuilder.MethodType: align vectors
ALIGN_WITH_FLOOR_PLANE - Static variable in class nxopen.display.ImageBasedLighting.ImageUpVectorTypes
ALIGN_WITH_PROBE - Static variable in class nxopen.cam.InspectionUVGridBuilder.SphereAxisType: Align with probe axis
alignAdvVisViewFacetsAlongEdges() - Method in interface nxopen.preferences.PartVisualizationShade: Returns the state of whether facets should be aligned along common edges for Advanced Visualization Views
License requirements: None.
alignAt() - Method in interface nxopen.features.shipdesign.OrientationAngleMethodsBuilder: Returns the indication if the region should be aligned with the adjacent region at the start of this region, or with the adjacent region at the end of this region.
alignAxis() - Method in interface nxopen.geometricutilities.AlignmentMethodBuilder: Returns the alignment axis
License requirements: None.
alignBreakPoints() - Method in interface nxopen.geometricutilities.FtmTransformCurvesBuilder: Returns the option for aligning break points used in the transformation or morphing calculations
License requirements: None.
alignCurve() - Method in interface nxopen.geometricutilities.AlignmentMethodBuilder: Returns the align curve
License requirements: None.
alignDirectionOfLoop(Point3d, Vector3d) - Method in interface nxopen.Section: Set the direction of a single loop of the section along the given vector.
ALIGNED - Static variable in class nxopen.annotations.TextOrientation: Specifies dimenson text aligned with the dimension line
ALIGNED - Static variable in class nxopen.cam.TrimPoint.RampAngleOptions: Ramp angle is aligned to angle.
ALIGNED - Static variable in class nxopen.drawings.ViewStyleFPCalloutConfigBuilder.OrientationType: Aligned
ALIGNED - Static variable in class nxopen.features.MeshTransformerBuilder.MeshTopologyType: Aligned
ALIGNED - Static variable in class nxopen.features.shipdesign.OrientationAngleMethodsBuilder.MethodTypes: Angle is the same as the previous or following region.
ALIGNED - Static variable in class nxopen.preferences.PartFlexiblePrintedCircuitDesign.FlatPatternCalloutOrientationType: Aligned
ALIGNED - Static variable in class nxopen.preferences.PartSheetmetal.FlatPatternCalloutOrientationType: Aligned
ALIGNED - Static variable in class nxopen.tooling.AutoDimensionBuilder.TextOrientationType
ALIGNED_BOUNDARY - Static variable in class nxopen.features.shipdesign.StiffenerBySupportPathBuilder.Method: Aligned Boundary
ALIGNED_BY_ANGLE - Static variable in class nxopen.MeshParameterData.Type
ALIGNED_BY_ARCLENGTH - Static variable in class nxopen.MeshParameterData.Type
ALIGNED_BY_DISTANCE - Static variable in class nxopen.MeshParameterData.Type
ALIGNED_BY_PARAMETER - Static variable in class nxopen.MeshParameterData.Type
ALIGNED_BY_POINT - Static variable in class nxopen.MeshParameterData.Type
ALIGNED_BY_SEGMENT - Static variable in class nxopen.MeshParameterData.Type
ALIGNED_BY_SPINE - Static variable in class nxopen.MeshParameterData.Type
ALIGNED_BY_SPLINE_PT - Static variable in class nxopen.MeshParameterData.Type
ALIGNED_LENGTH - Static variable in class nxopen.features.shipdesign.StiffenerBySupportPathBuilder.Method: Aligned Length
ALIGNED_NOSTUB - Static variable in class nxopen.annotations.LeaderType
ALIGNED_WITH_ARROWS - Static variable in class nxopen.annotations.AssociativeOriginType
alignedAnnotation - Variable in class nxopen.uf.UFDrf.AssociativeOrigin
alignedCenterlines() - Method in interface nxopen.annotations.Centerline3dBuilder: Returns the aligned centerlines, applicable only for creation
License requirements: None.
alignFloorPlane(Plane) - Method in interface nxopen.display.Stage: The stage's bottom wall (floor) aligns with the given plane.
alignImageToReferenceDirection() - Method in interface nxopen.display.ImageBaseBuilder: Align Image to Reference Direction
License requirements: None.
alignIndex - Variable in class nxopen.features.MeshSurfaceBuilder.ProfilePointAlignmentData: Alignment indices
alignMachineAxes() - Method in interface nxopen.cam.InspectionUVGridBuilder: Returns the flag to align with machine axes
License requirements: None.
alignment() - Method in interface nxopen.cae.xyplot.TextStyleSetting: Returns the text alignment.
ALIGNMENT - Static variable in class nxopen.cam.TurnRoughFinishLocalReturnBuilder.AdjustmentModeTypes: Ajustment: Alignment
alignment() - Method in interface nxopen.features.ThroughCurvesBuilder: Returns the alignment.
alignment() - Method in interface nxopen.geometricanalysis.sectionanalysis.SectionAnalysisExBuilder: Returns the alignment type
License requirements: None.
alignment - Variable in class nxopen.uf.UFModlFeatures.AskRuled1Data
alignment - Variable in class nxopen.uf.UFModlFeatures.AskRuledData
alignment - Variable in class nxopen.uf.UFModlFeatures.AskSweepData
alignment - Variable in class nxopen.uf.UFModlFeatures.AskThruCurves1Data
alignment - Variable in class nxopen.uf.UFModlFeatures.AskThruCurvesData
alignmentBodies() - Method in interface nxopen.facet.MultiPatchAlignmentBuilder: Returns the facet bodies to be aligned.
alignmentMethod() - Method in interface nxopen.cae.ContactMeshBuilder: Returns the alingment method
License requirements: None.
alignmentMethod() - Method in interface nxopen.drawings.ViewPlacementBuilder: Returns the alignment method
License requirements: None.
alignmentMethod() - Method in interface nxopen.features.RuledBuilder: Returns the alignment method
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
alignmentMethod() - Method in interface nxopen.features.StudioSurfaceBuilder: Returns the alignment method
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
alignmentMethod() - Method in interface nxopen.features.SweptBuilder: Returns the alignment method.
AlignmentMethodBuilder - Interface in nxopen.geometricutilities: Represents a AlignmentMethodBuilder
Created in NX5.0.0
AlignmentMethodBuilder.AlignFillerSurfaceType - Class in nxopen.geometricutilities: Filler surface types
AlignmentMethodBuilder.AllPointsData - Class in nxopen.geometricutilities: This class holds the data returned from AlignmentMethodBuilder.getAllPoints()
AlignmentMethodBuilder.Type - Class in nxopen.geometricutilities: Alignment types supported
alignmentOption() - Method in interface nxopen.drawings.ViewPlacementBuilder: Returns the alignment option used to indicate what points in the views to align.
alignmentOption() - Method in interface nxopen.features.AestheticFaceBlendBuilder: Returns the alignment option
License requirements: None.
alignmentPoint() - Method in interface nxopen.drawings.ViewPlacementBuilder: Returns the point to align to.
AlignmentPosition - Class in nxopen.annotations: Specifies the site location in the text box which can be used to locate a drafting object
alignmentPosition() - Method in interface nxopen.annotations.LetteringPreferences: Returns the align position
License requirements: None.
alignmentPosition() - Method in interface nxopen.annotations.TableSectionStyleBuilder: Returns the alignment Position settings of the section
License requirements: None.
alignmentPosition() - Method in interface nxopen.annotations.TitleBlockPreferences: Returns the alignment position
License requirements: None.
alignmentPosition - Variable in class nxopen.uf.UFDrf.ImageData
alignmentType() - Method in interface nxopen.MeshParameterData: Returns
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
alignmentVector() - Method in interface nxopen.drawings.ViewPlacementBuilder: Returns the vector to align along.
alignmentVectors - Variable in class nxopen.uf.UFDraw.BreakRegionData
alignmentView() - Method in interface nxopen.drawings.ViewPlacementBuilder: Returns the view to align to.
alignNegative(WeldFillStripBuilder) - Method in interface nxopen.weld.WeldFillStripBuilder: Aligns the end of the fill strip, opposite of the length direction from center, to the same end of the input fill strip.
alignNormals() - Method in interface nxopen.cae.modelcheck.AlignShellElementNormalBuilder: Aligns the normals of elements connected to the seed element.
alignOpName() - Method in interface nxopen.cam.InspectionAlignmentBuilder: Returns the align op name
License requirements: None.
alignParams - Variable in class nxopen.features.MeshSurfaceBuilder.ProfilePointAlignmentData: Alignment parameters
alignpoints - Variable in class nxopen.geometricutilities.AlignmentMethodBuilder.AllPointsData: Gets all the points, numPoints is total number of points, not points per section
alignPosition() - Method in interface nxopen.annotations.LetteringStyleBuilder: Returns the alignment position
License requirements: None.
alignPosition - Variable in class nxopen.uf.UFDrf.LetteringPreferences
alignPositive(WeldFillStripBuilder) - Method in interface nxopen.weld.WeldFillStripBuilder: Aligns the end of the fill strip, along the length direction from center, to the same end of the input fill strip.
alignShadedViewFacetsAlongEdges() - Method in interface nxopen.preferences.PartVisualizationShade: Returns the state of whether facets should be aligned along common edges for Shaded Views
License requirements: None.
AlignShellElementNormalBuilder - Interface in nxopen.cae.modelcheck: Represents a AlignShellElementNormalBuilder builder used to align the normals of connected shell elements with a seed shell element.
AlignShellElementNormalBuilder.ConnectedElementScope - Class in nxopen.cae.modelcheck: the options to define the connection scope to the seed element for model checking
alignStartOrientation() - Method in interface nxopen.die.DrawDiePunchBuilder: Returns the align start orientation switch of the draw die punch casting, if true use the alignment point to define the start of the punch profile, if false use the default algorithm to define the start of the punch profile.
alignsToCheck - Variable in class nxopen.uf.UFAssem.FindPrev16AlignsToCheckData
alignStock(Vector3d) - Method in interface nxopen.routing.Stock: Align stock to new rotation vector.
alignStock(Tag, double[]) - Method in interface nxopen.uf.UFRoute: Refer to UF_ROUTE_align_stock for documentation.
alignSymbolWithBaseline() - Method in interface nxopen.annotations.OrdinateDimensionPreferences: Returns the flag indicating whether to align the user defined symbol with the base line
License requirements: None.
alignSymbolWithBaseline() - Method in interface nxopen.annotations.OrdinateStyleBuilder: Returns the align symbol with baseline preference
License requirements: None.
alignTargetEdgeNode - Variable in class nxopen.uf.UFSf.ContactMeshData
alignTargetEdgeNodes() - Method in interface nxopen.cae.ContactMeshBuilder: Returns a flag to align target edge nodes
License requirements: None.
alignToAbsoluteCoordinateSystem() - Method in interface nxopen.geometricutilities.TransformerData: Reorient the tool by aligning it to absolute coordinate system
License requirements: solid_modeling ("SOLIDS MODELING")
.
alignToWorkCoordinateSystem() - Method in interface nxopen.geometricutilities.TransformerData: Reorient the tool by aligning it to work coordinate system
License requirements: solid_modeling ("SOLIDS MODELING")
.
alignType() - Method in interface nxopen.cam.InspectionAlignmentBuilder: Returns the alignment type
License requirements: None.
alignType() - Method in interface nxopen.geometricutilities.AlignmentMethodBuilder: Returns the alignment type
License requirements: None.
alignVector() - Method in interface nxopen.features.shipdesign.OrientationAngleMethodsBuilder: Returns the vector used to calculate the angle by aligning to this vector.
alignVector() - Method in interface nxopen.geometricutilities.AlignmentMethodBuilder: Returns the alignment vector
License requirements: None.
alignVector() - Method in interface nxopen.geometricutilities.ModlMotion: Returns the axis of ModlMotion.Options.ALIGN_AXIS_VECTOR motion option.
ALIGNWITH_REFERENCE_FACE - Static variable in class nxopen.features.ShelfBuilder.StepMethod
ALIGNWITH_REFERENCE_FACE - Static variable in class nxopen.features.StepBuilder.StepFaceMethods: Aligns the step face with the reference face
ALL - Static variable in class nxopen.annotations.HoleTableSettingsFormatBuilder.ShowColumnsType: All
ALL - Static variable in class nxopen.annotations.OrdinateLineArrowDisplayOption: Displays both the line and arrow
ALL - Static variable in class nxopen.annotations.PmiFilter.ComponentMethod: Specifies all components will be used
ALL - Static variable in class nxopen.annotations.SearchCriteriaDimensionBuilder.MeasurementTypes: Linear ALL
ALL - Static variable in class nxopen.annotations.SymbolStyleBuilder.FcfTextUnderlineOption
ALL - Static variable in class nxopen.annotations.TableCellStyleBuilder.BorderLocationType
ALL - Static variable in class nxopen.assemblies.ComponentAssembly.SubstitutionMode: An associative substitution is performed on all components that represent the same prototype part.
ALL - Static variable in class nxopen.assemblies.RelinkerBuilder.LinkType: Indicate relink browser type is all
ALL - Static variable in class nxopen.BasePart.BookmarkOption: Write component groups, load options and structure.
ALL - Static variable in class nxopen.cae.DurabilityEventOverridesBuilder.UseElementsEnum: All
ALL - Static variable in class nxopen.cae.DurabilitySolverBuilder.ActiveEventSolveOptionsEnum: All
ALL - Static variable in class nxopen.cae.Laminate.ZoneType: Export all zones
ALL - Static variable in class nxopen.cae.LaminateSineEventBuilder.NaturalFrequeciesEnum: Select all natural frequencies
ALL - Static variable in class nxopen.cae.MeshControlBuilder.SizeTypes
ALL - Static variable in class nxopen.cae.modelcheck.DuplicateNodesCheckBuilder.ListOption: List all duplicate node pairs found
ALL - Static variable in class nxopen.cae.modelcheck.ElementQualityCheckBuilder.ReportFormat: Lists check results for all elements
ALL - Static variable in class nxopen.cae.ModelDisplayBuilder.NodeMeshShowHideOptionType: All
ALL - Static variable in class nxopen.cae.ModelUpdateSolution.TargetType: Export all the targets to the csv file
ALL - Static variable in class nxopen.cae.optimization.Category: Model constraints
ALL - Static variable in class nxopen.cae.optimization.TBSGroupDefinition.DefinitionType: Defines a group with all nodes or elements
ALL - Static variable in class nxopen.cae.optimization.TBSOutputControlOptions.Op2Option: Output op2 results of all iterations
ALL - Static variable in class nxopen.cae.optimization.TBSSmoothBuilder.SliceFormatOption: Save slices in all formats mentioned above
ALL - Static variable in class nxopen.cae.ProjectNodesToCadGeometryBuilder.ListingOption: List All information on nodes that are off the CAD geometry by more than the input tolerance
ALL - Static variable in class nxopen.cae.responsesimulation.DirectionDataComponent
ALL - Static variable in class nxopen.cae.responsesimulation.NodalFunctionEvalBeamLocation: All four Stress Recovery points on a beam cross section
ALL - Static variable in class nxopen.cae.responsesimulation.NodalFunctionEvalShellLocation: All three layers
ALL - Static variable in class nxopen.cae.Result.Section
ALL - Static variable in class nxopen.cae.ResultProbeBuilder.IterationSelection
ALL - Static variable in class nxopen.cae.ResultProbeBuilder.IterationType
ALL - Static variable in class nxopen.cae.ResultProbeBuilder.LoadcaseSelection
ALL - Static variable in class nxopen.cam.CutRegionsBuilder.CutRegionsContainmentTypes: All
ALL - Static variable in class nxopen.cam.CutRegionsBuilder.CutRegionsProgramTypes: All
ALL - Static variable in class nxopen.cam.CutRegionsBuilder.CutRegionsStatusTypes: All
ALL - Static variable in class nxopen.cam.CutSides.SideType: All Sides
ALL - Static variable in class nxopen.cam.GeometrySet.LoopsIgnoreTypes: Deprecated.

all
ALL - Static variable in class nxopen.cam.GroupFeatures.FeaturesToGroupTypes
ALL - Static variable in class nxopen.cam.RoughTurningBuilder.CleanupTypes: Cleanup mode: All
ALL - Static variable in class nxopen.DisplayManager.ShowHideType: Show or hide all of the following objects
ALL - Static variable in class nxopen.drawings.DraftingViewCollection.ViewUpdateOption: Updates all views in scope (part or drawing sheet).
ALL - Static variable in class nxopen.drawings.DrawingRegionBuilder.ContentToMove
ALL - Static variable in class nxopen.drawings.ViewProjectedViewSettingsBuilder.DisplayArrowOnParentViewType
ALL - Static variable in class nxopen.DxfdwgImporter.ConvLayoutsAs: Convert all layouts
ALL - Static variable in class nxopen.features.DatumAxisBuilder.FixedType: Fixed datum axis thru all Axis
ALL - Static variable in class nxopen.features.DatumPlaneBuilder.FixedType: Fixed datum plane thru all planes
ALL - Static variable in class nxopen.features.DraftBodyBuilder.MatchingScope: All faces-to-draft are to be matched
ALL - Static variable in class nxopen.features.DraftBodyBuilder.MatchOption: All faces-to-draft are to be matched
ALL - Static variable in class nxopen.features.shipdesign.PlateBuilder.RegionOptions
ALL - Static variable in class nxopen.features.shipdesign.ShipIntersectionsBuilder.Type
ALL - Static variable in class nxopen.features.shipdesign.ShipSectionBuilder.XFilter
ALL - Static variable in class nxopen.features.shipdesign.ShipSectionBuilder.ZFilter
ALL - Static variable in class nxopen.features.StudioXformBuilderEx.ProportionalPoleControlType: All poles are moved
ALL - Static variable in class nxopen.features.subdivision.TransformCageData.FallOffMethodType: All vertices falloff
ALL - Static variable in class nxopen.features.vehicledesign.MirrorCertificationBuilder.ShowVisionConeType: Represents both of Eye-Mirror and Mirror Target vision cones are shown
ALL - Static variable in class nxopen.fields.DisplayPropertiesBuilder.DepLabelValueEnum
ALL - Static variable in class nxopen.fields.FieldEvaluator.InverseDistanceWeightingEnum: Sum of the weighted value of all points, based on the inverse of the distance
ALL - Static variable in class nxopen.geometricanalysis.DeviationGaugeBuilder.AdditionalValuesLabelType: All
ALL - Static variable in class nxopen.geometricutilities.OnPathDimensionBuilder.UpdateReason: Update because either path or through point location may have changed
ALL - Static variable in class nxopen.HumanData.EditDisplayBodyParts: Indicate edit display body parts named all
ALL - Static variable in class nxopen.Information.DisplayFeatureType: Displays all the information.
ALL - Static variable in class nxopen.JtCreator.FileWrite: ALL
ALL - Static variable in class nxopen.JtCreator.RefsetOption: ALL
ALL - Static variable in class nxopen.layout2d.Layout2dComponentMemberType
ALL - Static variable in class nxopen.LoadOptions.LoadComponents: load all components
ALL - Static variable in class nxopen.LoadOptions.Parent: Recursively fully load all parts with parent geometry linked to geometry in the parts selected for loading
ALL - Static variable in class nxopen.motion.ActiveView: Articulation or Spreadsheet Run in all views
ALL - Static variable in class nxopen.motion.JointFrictionAdams.FrictionEffect
ALL - Static variable in class nxopen.motion.JointFrictionRecurDyn.FrictionEffect
ALL - Static variable in class nxopen.PartCleanup.CleanupParts: clean up all loaded parts
ALL - Static variable in class nxopen.PartCleanup.DeleteGroups: delete all the empty groups
ALL - Static variable in class nxopen.pdm.PartFromPartBuilder.FileSaveAs: save all during save as
ALL - Static variable in class nxopen.pdm.PartOperationBuilder.DependentFileSaveAs: Deprecated.

save all during save as
ALL - Static variable in class nxopen.pdm.PartOperationBuilder.NonMasterSaveAs: Deprecated.

save all during save as
ALL - Static variable in class nxopen.pdm.PartOperationCopyBuilder.CopyDependentFiles: save all during save as
ALL - Static variable in class nxopen.pdm.PartOperationCopyBuilder.CopyNonMasterParts: save all during save as
ALL - Static variable in class nxopen.preferences.ReferenceSetBehavior: Inherit all PMI regardless of whether the referenced objects are in the active reference set.
ALL - Static variable in class nxopen.preferences.RoutingElectrical.CreateTerminalsType: Create terminals to all terminals
ALL - Static variable in class nxopen.preferences.SessionModeling.ImmediateChildrenType: Indicates that Immediate Children type is at all level
ALL - Static variable in class nxopen.routing.IsoDrawingBuilder.RunsToDrawTypes
ALL - Static variable in class nxopen.routing.StockBrowserBuilder.TypeFilter: All Stocks
ALL - Static variable in class nxopen.Selection.SelectionType: Filter to select all object types
ALL - Static variable in class nxopen.sim.KinematicSinumerikCaBuilder.PlcUsageTypes: All
ALL - Static variable in class nxopen.Sketch.ConstraintVisibility: Deprecated.

All constraints are visible
ALL - Static variable in class nxopen.tooling.CompDrawingBuilder.ComponentTypeSelection: the type of components, read from configuration file
ALL - Static variable in class nxopen.tooling.CompDrawingBuilder.FilterSelection: list all components
ALL - Static variable in class nxopen.tooling.ScrapDesignBuilder.RemoveType: Captures any kind of scraps
ALL - Static variable in class nxopen.weld.ConnectionFinderBuilder.FilterTypes
ALL_ACTIVE_MEMBER_VIEWS - Static variable in class nxopen.display.TransientText.ViewType
ALL_ACTIVE_VIEWS - Static variable in class nxopen.display.TransientText.ViewType
ALL_AND_DISABLE_SPECIFIC - Static variable in class nxopen.Selection.SelectionAction: Select all objects except for selected objects
ALL_AROUND - Static variable in class nxopen.annotations.ArcComponent.ArcType: all around
ALL_AROUND - Static variable in class nxopen.annotations.LeaderData.LeaderType: Plain leader style with all around symbol
ALL_AROUND - Static variable in class nxopen.annotations.LineWeldBuilder.WeldSymbolWeldAlongContourType
ALL_ASSOC_OCC_LOADED - Static variable in class nxopen.annotations.DisplayPmiEffectivityMethod
ALL_AXES - Static variable in class nxopen.cam.HoleMakingBuilder.ToolAxisTypes: Tool axis mode: All axes
ALL_AXES - Static variable in class nxopen.cam.OrientGeomBuilder.ToolAxisModes: Tool axis mode: All axes
ALL_BODIES - Static variable in class nxopen.cae.FemPart.UseBodiesOption: Use all bodies from the cad part
ALL_BODY_FACES - Static variable in class nxopen.features.ExtractFaceBuilder.FaceOptionType: all faces of body option
ALL_BUT_DEFAULT - Static variable in class nxopen.preferences.PartObject.ObjectType: All But Default
ALL_BUT_LEVEL - Static variable in class nxopen.cam.RoughTurningBuilder.CleanupTypes: Cleanup mode: All but level
ALL_BUT_SELECTED - Static variable in class nxopen.features.DraftBodyBuilder.MatchingScope: All faces-to-draft except the ones explicitly indicated are to be matched
ALL_BUT_SELECTED - Static variable in class nxopen.features.DraftBodyBuilder.MatchOption: All faces-to-draft except the ones explicitly indicated are to be matched
ALL_BUT_SELECTED_OBJECTS - Static variable in class nxopen.assemblies.ClearanceAnalysisBuilder.CollectionRange
ALL_BUT_STEEP - Static variable in class nxopen.cam.RoughTurningBuilder.CleanupTypes: Cleanup mode: All but steep
ALL_COMPONENTS - Static variable in class nxopen.cae.Result.TensorDerivedAbsolute: Absolute of primary components first
ALL_CONS - Static variable in class nxopen.uf.UFSket.ConClass
ALL_CORNERPOINTS - Static variable in class nxopen.features.DivideCurveBuilder.CornerOption: All Cornerpoints
ALL_DATA_COMPONENTS - Static variable in class nxopen.cae.responsesimulation.DirectionDataComponent
ALL_DATUM_TYPES - Static variable in class nxopen.uf.UFProcessAid.Types
ALL_DEVIATION - Static variable in class nxopen.Measurement.DeviationReportType: All Deviation
ALL_DEVIATIONS - Static variable in class nxopen.geometricanalysis.DeviationChecking.DeviationOptions: show all deviations
ALL_DIRECTIONS - Static variable in class nxopen.cae.responsesimulation.DirectionDataComponent
ALL_ELEMENTS_ATTACHED_TO_NODE - Static variable in class nxopen.cae.ElementConnectivityBuilder.Types: Modify connectivities of all attached elements to nodes.
ALL_EXPRESSIONS - Static variable in class nxopen.cae.optimization.DAODesignVariableBuilder.Variable: Variables from FEM, SIM and master part
ALL_FACES_OF_BODY - Static variable in class nxopen.uf.UFSurfReg.Type
ALL_FINISH_PASSES - Static variable in class nxopen.cam.Cutcom.Types: cutter compensation on all finish passes
ALL_FINISH_PASSES - Static variable in class nxopen.cam.NcmPlanarBuilder.CutcomTypes: cutter compensation on all finish passes
ALL_FORCES - Static variable in class nxopen.cae.responsesimulation.DirectionDataComponent
ALL_GEOMETRY - Static variable in class nxopen.cam.FeatureRecognitionBuilder.GeometrySearch: Search for features in all geometry
ALL_GEOMETRY - Static variable in class nxopen.uf.UFGdt.GeometricDefinitionType
ALL_IN_ASSY_TREE - Static variable in class nxopen.ExpressionCollection.ExportMode: All expressions in the given part, and in its components
ALL_KNOTPOINTS - Static variable in class nxopen.features.DivideCurveBuilder.KnotPointOption: All Knotpoints
ALL_LEGS - Static variable in class nxopen.cae.responsesimulation.DirectionDataComponent
ALL_LEVELS - Static variable in class nxopen.assemblies.LoadInterpartDataBuilder.OpenUnloadedParentsType: Load all partially loaded parts that contain links and all level parent parts regardless of load status
ALL_NAMED - Static variable in class nxopen.JtCreator.RefsetOption: ALL_NAMED
ALL_NORMALS - Static variable in class nxopen.cae.responsesimulation.DirectionDataComponent
ALL_OBJECT - Static variable in class nxopen.preferences.PartVisualizationShade.ViewUpdateModeType: Applicable to all object
ALL_OBJECTS - Static variable in class nxopen.assemblies.ClearanceAnalysisBuilder.CollectionRange
ALL_OBJECTS - Static variable in class nxopen.display.FacetSettingsBuilder.FacetUpdate
ALL_OBJECTS_COPIED - Static variable in class nxopen.gateway.CopyCutBuilder.Status: All objects were successfully copied
ALL_OFFSETS - Static variable in class nxopen.features.vehicledesign.CloseRangeVisibilityBuilder.EyePointOffsetTypes: All offsets
ALL_OVER - Static variable in class nxopen.annotations.ArcComponent.ArcType: all over
ALL_OVER - Static variable in class nxopen.annotations.LeaderData.LeaderType
ALL_OVER - Static variable in class nxopen.annotations.LeaderType
ALL_OVER - Static variable in class nxopen.uf.UFGdt.ModifierTypes
ALL_PAIRS - Static variable in class nxopen.cae.MMCCreateBuilder.FaceSearchType: all pairs
ALL_PAIRS - Static variable in class nxopen.geometricanalysis.SimpleInterference.FaceInterferenceMethod: Find all pairs of interfering faces.
ALL_PARTS - Static variable in class nxopen.ExpressionCollection.ExportMode: All expressions in All parts in the session
ALL_PARTS_IN_DISPLAYED_ASSEMBLY - Static variable in class nxopen.assemblies.LoadInterpartDataBuilder.SelectionScopeType: Load interpart data for all parts in displayed assembly
ALL_PARTS_IN_SESSION - Static variable in class nxopen.assemblies.LoadInterpartDataBuilder.SelectionScopeType: Load interpart data for all parts in session
ALL_PASSES - Static variable in class nxopen.cam.CornerControlBuilder.SmoothingOptions: all passes
ALL_PASSES - Static variable in class nxopen.cam.NcmHoleMachining.CutcomTypes: cutter compensation on all passes
ALL_PASSES - Static variable in class nxopen.cam.WedmGeomBuilder.CornerSmoothingType: all passes
ALL_PASSES - Static variable in class nxopen.cam.WedmOperationBuilder.CornerSmoothingType: all passes
ALL_PLUS_DISPLAY - Static variable in class nxopen.BasePart.BookmarkOption: Write component groups, load options, structure and display attributes
ALL_POINTS - Static variable in class nxopen.features.DatumAxisBuilder.UseArcLength: Both points use arclength
ALL_POINTS - Static variable in class nxopen.features.DatumPlaneBuilder.UseArcLength: All points use arclength
ALL_REGIONS - Static variable in class nxopen.cam.NcmPlanarBuilder.PredrillPointsOutputOptions: Pre-Drill Points for all regions
ALL_REVISIONS - Static variable in class nxopen.assemblies.AssembliesChildRevisionOptions: show all revisions of the child parts
ALL_TRANSLATIONAL - Static variable in class nxopen.cae.responsesimulation.DirectionDataComponent
ALL_TYPES - Static variable in class nxopen.cae.MeshControlBuilder.FilletType
ALL_TYPES - Static variable in class nxopen.cae.RadiusType: All fillet types
ALL_TYPES - Static variable in class nxopen.uf.UFWeld.Types
ALL_UTF8 - Static variable in class nxopen.uf.UFText.ModeS
ALL_VIEWS - Static variable in class nxopen.preferences.PartVisualizationNamesBorders.NameDisplay: All Views places all names in the all views except the drawing member views
ALL_VIEWS_BUT_DRAWING - Static variable in class nxopen.display.TransientText.ViewType
ALL_VIOLATIONS - Static variable in class nxopen.routing.DesignRuleViolationViewer.FilterOption: will show all violations
ALL_VISIBLE - Static variable in class nxopen.cae.modelcheck.AlignShellElementNormalBuilder.ConnectedElementScope: Limits check to only those shell elements which are connected to the Seed Element and are currently visible
ALL_VISIBLE_OBJECTS - Static variable in class nxopen.assemblies.ClearanceAnalysisBuilder.CollectionRange
ALL_XY_PLANE - Static variable in class nxopen.cae.responsesimulation.DirectionDataComponent
allAround - Variable in class nxopen.uf.UFGdt.LeaderSpec
allAroundDiameter - Variable in class nxopen.uf.UFGdt.LeaderSpec
allAroundSymbol() - Method in interface nxopen.annotations.LineAndArrowPreferences: Returns the size of all around symbol.
allAroundSymbolSize() - Method in interface nxopen.annotations.LineArrowStyleBuilder: Returns the size of all around symbol.
AllAroundVision - Interface in nxopen.features.vehicledesign: Represents an all-around vision feature
To create or edit an instance of this class, use AllAroundVisionBuilder

Created in NX8.5.0
AllAroundVisionBuilder - Interface in nxopen.features.vehicledesign: A AllAroundVisionBuilder used to create or edit a vehicle design AllAroundVision feature.
AllAroundVisionBuilder.Types - Class in nxopen.features.vehicledesign: Used to indicate the type of obstructing geometry to use.
AllAroundVisionBuilder.WindowTypes - Class in nxopen.features.vehicledesign: Used to indicate the type of geometry used to define the window.
AllData() - Constructor for class nxopen.routing.HealPath.AllData
AllData() - Constructor for class nxopen.uf.UFBound.AllData
AllData(int, int, Tag, double, double[], double[], UFBound.MemberData[]) - Constructor for class nxopen.uf.UFBound.AllData
allInstances() - Method in interface nxopen.features.ChamferBuilder: Returns the chamfer all instance status
License requirements: None.
allInstancesOption() - Method in interface nxopen.features.EdgeBlendBuilder: Returns the blend all instances option
License requirements: None.
allLevelsOfDetail() - Method in interface nxopen.VRMLImporter: Returns the All Levels of Detail flag.
allMeshContext() - Method in interface nxopen.cae.ThicknessBuilder: Returns the all mesh in context
License requirements: None.
allocIdealizeParms() - Method in interface nxopen.uf.UFSf: Refer to UF_SF_alloc_idealize_parms for documentation.
allocIdealizeRegion(Tag, int, Tag[], Tag) - Method in interface nxopen.uf.UFSf: Refer to UF_SF_alloc_idealize_region for documentation.
ALLOW - Static variable in class nxopen.blockstyler.Tree.BeginLabelEditState: Use this option to allow label edit.
ALLOW_ALL_TYPES - Static variable in class nxopen.ApparentChainingRuleSelection
ALLOW_CURVE - Static variable in class nxopen.ApparentChainingRuleSelection
ALLOW_EDGE - Static variable in class nxopen.ApparentChainingRuleSelection
ALLOW_STEP - Static variable in class nxopen.HumanData.InverseKinematicsBalanceType: Indicate human is allowed to move one step to keep balance
allowableGeom - Variable in class nxopen.uf.UFPd.AskDefinitionAllowableGeometryData
allowableThickening() - Method in interface nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder: Returns the allowable thickening
License requirements: None.
allowableThinning() - Method in interface nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder: Returns the allowable thinning
License requirements: None.
allowance() - Method in interface nxopen.geometricutilities.ReplAsstBuilder: Returns the deviation allowance for geometric matching
License requirements: None.
allowanceValue() - Method in interface nxopen.features.shipdesign.MaterialAllowanceBuilder: Returns the allowance value to set the material.
allowArcs() - Method in interface nxopen.routing.ConnectedCurvesBuilder: Returns the flag that allows traversal of arcs when finding connected curves.
allowBroken() - Method in interface nxopen.weld.FilletBuilder: Returns the toggle to allow broken link.
allowCutElbow() - Method in interface nxopen.routing.LinearPathSettings: Returns a flag indicating whether or not to allow cut elbow placement
License requirements: routing_pipetube ("Routing Piping and Tubing")
.
allowDefaultWidth() - Method in interface nxopen.blockstyler.LineWidth: Returns the AllowDefaultWidth
License requirements: None.
allowDeleteMembers() - Method in interface nxopen.features.PartModule: Returns the allow delete members flag.
allowDeselectForSingleSelect() - Method in interface nxopen.blockstyler.ListBox: Returns the AllowDeselectForSingleSelect.
allowDuplicates() - Method in interface nxopen.annotations.BaseOrdinateDimensionBuilder: Returns the allow duplicates
License requirements: None.
allowEditingOfDimensionOfInternalSketch() - Method in interface nxopen.preferences.SessionModeling: Returns the option "allow_editing_of_dimension_of_internal_sketch" gives choice, whether or not the sketch dimensions will display and be possible to select and edit directly, without entering the Sketch task environment when a dialog (e.g.
allowedStepTypeCount() - Method in interface nxopen.cae.SimSolution: Returns the count of allowable step types
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
allowFeetInchFractionForDimensionGreaterThan() - Method in interface nxopen.drafting.AutomationPreferencesBuilder: Returns the determination of the feet inch fraction display for dimension greater than
License requirements: None.
allowgapjumping - Variable in class nxopen.cae.EdgePathMethod.SeedsData: if true, gaps between edges will be jumped
allowgapjumping - Variable in class nxopen.cae.ElemEdgePathMethod.SeedsData: if true, gaps between element edges will be jumped
allowHeadAndEyeRotation() - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder: Returns the indication if the head and eye rotation is allowed.
allowInchFractionToNearest() - Method in interface nxopen.drafting.AutomationPreferencesBuilder: Returns the determination of the display for inch fraction to nearest
License requirements: None.
allowInferredCurveSelection() - Method in interface nxopen.blockstyler.CurveCollector: Returns the AllowInferredCurveSelection
License requirements: None.
allowInferredCurveSelection() - Method in interface nxopen.blockstyler.SectionBuilder: Returns the AllowInferredCurveSelection
License requirements: None.
allowInferredCurveSelection() - Method in interface nxopen.blockstyler.SuperSection: Returns the AllowInferredCurveSelection
License requirements: None.
allowInsideGeometry() - Method in interface nxopen.drafting.AutomationRuleBuilder: Returns the allow inside geometry option allows annotation inside geometry
License requirements: None.
allowInternationalTextInput() - Method in interface nxopen.blockstyler.StringBlock: Returns the AllowInternationalTextInput
License requirements: None.
allowLines() - Method in interface nxopen.routing.ConnectedCurvesBuilder: Returns the flag that allows traversal of lines when finding connected curves.
allowManualRows() - Method in interface nxopen.annotations.PartsListBuilder: Returns the allow manual rows option that determines whether or not manual rows are allowed to be inserted into a parts list
License requirements: None.
allowmanualrows - Variable in class nxopen.uf.UFPlist.Prefs
allowMissingComponents - Variable in class nxopen.uf.UFClone.ExLogOpts
allowMultipleValues() - Method in interface nxopen.AttributeTemplatesBuilder: Returns the flag specifying if an attribute can contain multiple values.
allowNewCables() - Method in interface nxopen.routing.electrical.CablewaysBuilder: Returns the allow new cables toggle
License requirements: routing_cabling ("Routing Cabling")
.
allowNewDrawing - Variable in class nxopen.uf.UFCgm.ImportOptions
allowNoChangeWidth() - Method in interface nxopen.blockstyler.LineWidth: Returns the AllowNoChangeWidth.
allowOccs() - Method in interface nxopen.routing.ConnectedCurvesBuilder: Returns the flag that allows traversal of curve occurrences when finding connected curves.
allowOutOfSyncBvrs - Variable in class nxopen.uf.UFClone.ExLogOpts
allowOversizeTool() - Method in interface nxopen.cam.HoleMakingBuilder: Returns the Allow Oversize Tool flag
License requirements: None.
allowOwnedObjectSelectionOption() - Method in interface nxopen.userdefinedobjects.UserDefinedClass: Returns the allow owned object selection flag.
allowPatch() - Method in interface nxopen.tooling.EdgePatchBuilder: Returns the flag indicating if creating copies for patch surface is allowed.
allowPostureValueOutOfRange() - Method in interface nxopen.features.vehicledesign.ManikinBuilder: Returns the setting to indicate if posture values can be out of the standard range or not, true indicates the values can be out of range, false indicates the values cannot be out of range.
allowQueryClassFromName() - Method in interface nxopen.userdefinedobjects.UserDefinedClass: Returns the allow query class from name flag.
allowRemote - Variable in class nxopen.pdm.PdmPart.CheckinInput: True to allow remote check in, false otherwise
allowRemote - Variable in class nxopen.pdm.PdmPart.CheckoutInput: True to allow remote check out, false otherwise
allowSelfIntersectingSection(boolean) - Method in interface nxopen.features.ExtrudeBuilder: SET option for supporting self-intersecting section
License requirements: solid_modeling ("SOLIDS MODELING")
.
allowSelfIntersection() - Method in interface nxopen.features.CompositeCurveBuilder: Returns the self intersection
License requirements: None.
allowSelfIntersection(boolean) - Method in interface nxopen.Section: Allow self intersecting section or not.
allowShortcuts() - Method in interface nxopen.blockstyler.Enumeration: Returns the AllowShortcuts.
allowSlip() - Method in interface nxopen.mechatronics.CouplingBuilder: Returns the coulping can slip or not.
allowSplines() - Method in interface nxopen.routing.ConnectedCurvesBuilder: Returns the flag that allows traversal of splines when finding connected curves.
allowStopAtIntersectionFollowFillet() - Method in interface nxopen.blockstyler.SectionBuilder: Returns the AllowStopAtIntersectionFollowFillet
License requirements: None.
allowStopAtIntersectionFollowFillet() - Method in interface nxopen.blockstyler.SuperSection: Returns the AllowStopAtIntersectionFollowFillet
License requirements: None.
allowSubstitution() - Method in interface nxopen.LoadOptions: Returns the allow substition option.
allowTemporaryPartsToReplace() - Method in interface nxopen.assemblies.ReplaceComponentBuilder: Returns the flag to determine whether unsaved parts are allowed to replace.
allowTransitionCurveOnBlends() - Method in interface nxopen.features.BlendCornerBuilder: Returns the transition curve on blend faces
License requirements: None.
allowTwistPatches - Variable in class nxopen.uf.UFModl.EdgeBlendMultData
allowUndercut() - Method in interface nxopen.cam.TurnCutParameters: Returns the undercut
License requirements: None.
allowUndercutting() - Method in interface nxopen.cam.MillCutParameters: Returns the allow undercutting toggle
License requirements: None.
AllParametersData() - Constructor for class nxopen.cam.HolderSectionBuilder.AllParametersData
AllPointsData() - Constructor for class nxopen.geometricutilities.AlignmentMethodBuilder.AllPointsData
allroundSymbol() - Method in interface nxopen.annotations.LineWeldData: Returns the flag indicating whether the allround symbol is displayed
License requirements: None.
allSameColor() - Method in interface nxopen.geometricutilities.ColorCodedRegionBuilder: Returns the option to select all regions of the same color
License requirements: None.
allSectionList() - Method in interface nxopen.SketchEditDefiningSectionBuilder: Returns the section list of all referencing feature
License requirements: solid_modeling ("SOLIDS MODELING")
.
allsubcase - Variable in class nxopen.cae.optimization.TBSLoadCase.SubcaseData
allsubsteps - Variable in class nxopen.cae.optimization.TBSLoadCase.SubstepData
ALONG - Static variable in class nxopen.tooling.ChannelAdjustBuilder.VectorMethod: Reposition the target channels along the vector specified.
ALONG_AVECTOR - Static variable in class nxopen.features.TrimCurveBuilder.InteresectionDirectionOptions: Along a vector
ALONG_AXIS - Static variable in class nxopen.cam.DmRotaryFloorFinishBuilder.DirectionType: along axis
ALONG_BLADE_DIRECTION - Static variable in class nxopen.cam.BladeEdge.EdgePointType: along blade direction
ALONG_BOTH_DIRECTIONS - Static variable in class nxopen.tooling.CoolingDefineChannelBuilder.ExtensionTypes: Extend channel to boundary body along both direction
ALONG_CENTER_LINE - Static variable in class nxopen.weld.WeldPointLocation: To sections are needed for this method.
ALONG_CURVE - Static variable in class nxopen.features.GeomcopyBuilder.TransformTypes: along a path
ALONG_CURVE - Static variable in class nxopen.geometricanalysis.sectionanalysis.SectionAnalysisBuilder.Types: Along Curve
ALONG_CURVE_ANGLE - Static variable in class nxopen.geometricutilities.ModlMotion.Options: Move by AlongCurve-Angle
ALONG_CUT - Static variable in class nxopen.cam.NcmHoleMachining.OverlapTypes: along cut
ALONG_DATUM_AXIS - Static variable in class nxopen.uf.UFModl.SmholeDirectionType
ALONG_DIRECTION - Static variable in class nxopen.cae.NodeTranslateBuilder.MethodType: along direction
ALONG_ELEMENT_NORMAL - Static variable in class nxopen.cae.ManualMorphBuilder.MapMethod
ALONG_EXTRUSION_DIRECTION - Static variable in class nxopen.tooling.CoolingDefineChannelBuilder.ExtensionTypes: Extend channel to boundary body along the extrusion direction
ALONG_FACE - Static variable in class nxopen.features.OffsetEdgeBuilder.OffsetEdgeMethod
ALONG_FACE_NORMAL - Static variable in class nxopen.features.ProjectCurveBuilder.DirectionType: Represents Along Face Normal
ALONG_FIXED_VECTOR - Static variable in class nxopen.uf.UFCurve.Direction
ALONG_GUIDE - Static variable in class nxopen.features.shipdesign.WeldCut2Builder.CreationMethod
ALONG_GUIDE - Static variable in class nxopen.features.shipdesign.WeldCutBuilder.CreationMethod
ALONG_GUIDE_CURVE - Static variable in class nxopen.weld.WeldPointLocation: Place spot welds along guide curves
ALONG_GUIDE_EDGE - Static variable in class nxopen.weld.WeldPointLocation: Place spot welds by offsetting from an edge(s).
ALONG_PART_AXIS - Static variable in class nxopen.cam.BladeEdge.EdgePointType: along part axis
ALONG_PATH - Static variable in class nxopen.geometricutilities.PatternDefinition.PatternEnum: pattern along a section path.
ALONG_PLANAR_CURVE_NORMALS - Static variable in class nxopen.uf.UFCurve.Direction
ALONG_PLANE_OR_FACE - Static variable in class nxopen.features.shipdesign.SplitProfilePlateBuilder.SplitDirectionOptionType: Split profile/plate along selected plane or face
ALONG_PLANEOF_EDGE - Static variable in class nxopen.features.OffsetEdgeBuilder.OffsetEdgeMethod
ALONG_REVERSE_EXTRUSION_DIRECTION - Static variable in class nxopen.tooling.CoolingDefineChannelBuilder.ExtensionTypes: Extend channel to boundary body along the reverse extrusion direction
ALONG_SCREEN_NORMAL - Static variable in class nxopen.features.TrimCurveBuilder.InteresectionDirectionOptions: Along screen normal
ALONG_SPINE - Static variable in class nxopen.features.HelixBuilder.Types: Along a spine
ALONG_SURFACE_CHORD - Static variable in class nxopen.features.shipdesign.StiffenerSystemBuilder.MeasureAlongModes
ALONG_SURFACE_LENGTH - Static variable in class nxopen.features.shipdesign.StiffenerSystemBuilder.MeasureAlongModes
ALONG_TOOL_AXIS - Static variable in class nxopen.cam.LaserLinearMove.MotionEnds: Along Tool Axis
ALONG_TOOL_AXIS - Static variable in class nxopen.cam.LowerLimit.ActionTypes: along tool axis
ALONG_TOOL_AXIS - Static variable in class nxopen.cam.NcmTransferBuilder.AppDepMethodTypes: along tool axis
ALONG_VECTOR - Static variable in class nxopen.cae.ManualMorphBuilder.MapMethod
ALONG_VECTOR - Static variable in class nxopen.cam.LaserLinearMove.MotionEnds: Along Vector
ALONG_VECTOR - Static variable in class nxopen.cam.NcmPlanarEngRetBuilder.EngRetTypes: Vector Dist
ALONG_VECTOR - Static variable in class nxopen.cam.NcmTransferBuilder.AppDepMethodTypes: along vector
ALONG_VECTOR - Static variable in class nxopen.cam.NormalToToolAxisMoveBuilder.Orientation: Along Vector
ALONG_VECTOR - Static variable in class nxopen.facet.SnipFacetBodyBuilder.DirectionType: Snip along specified vector
ALONG_VECTOR - Static variable in class nxopen.features.HelixBuilder.Types: Along a vector
ALONG_VECTOR - Static variable in class nxopen.features.ProjectCurveBuilder.DirectionType: Represents Along Vector
ALONG_VECTOR - Static variable in class nxopen.features.shipdesign.OrientationRegionItemBuilder.OrientationMethodTypes: The web of the profile is aligned along the specified vector.
ALONG_VECTOR - Static variable in class nxopen.geometricanalysis.DeviationGaugeBuilder.MeasurementMethodType: Along vector
ALONG_VECTOR - Static variable in class nxopen.uf.UFModl.SmholeDirectionType
ALONG_VECTOR - Static variable in class nxopen.weld.WeldProjectionMethod: creates a cylinder
ALONG_WEB - Static variable in class nxopen.features.shipdesign.StiffenerBuilder.MountingMethods: Offset stiffener along web direction
ALONG_WEB - Static variable in class nxopen.features.shipdesign.StiffenerSystemBuilder.MountingMethods: Offset stiffener along web direction
ALONG_X - Static variable in class nxopen.uf.UFCurve.ConstraintType
ALONG_XC - Static variable in class nxopen.features.AssociativeLineBuilder.EndOption: Along XC
ALONG_XC - Static variable in class nxopen.features.AssociativeLineBuilder.StartOption: Along XC
ALONG_XDIRECTION - Static variable in class nxopen.tooling.DieBaseBuilder.AlongDirectionOpt: along X direction
ALONG_Y - Static variable in class nxopen.uf.UFCurve.ConstraintType
ALONG_YC - Static variable in class nxopen.features.AssociativeLineBuilder.EndOption: Along YC
ALONG_YC - Static variable in class nxopen.features.AssociativeLineBuilder.StartOption: Along YC
ALONG_YDIRECTION - Static variable in class nxopen.tooling.DieBaseBuilder.AlongDirectionOpt: along Y direction
ALONG_Z - Static variable in class nxopen.uf.UFCurve.ConstraintType
ALONG_ZC - Static variable in class nxopen.features.AssociativeLineBuilder.EndOption: Along ZC
ALONG_ZC - Static variable in class nxopen.features.AssociativeLineBuilder.StartOption: Along ZC
alongCurve() - Method in interface nxopen.geometricutilities.ModlAlongCurveAngle: Returns the value of transform.
alongCurveAngle() - Method in interface nxopen.geometricutilities.ModlAlongCurveAngle: Returns the value of angular transform.
alongCurveAngle() - Method in interface nxopen.geometricutilities.ModlMotion: Returns the alongCurveAngle of ModlMotion.Options.ALONG_CURVE_ANGLE motion option.
alongDirection() - Method in interface nxopen.facet.SnipFacetBodyBuilder: Returns the direction in which snipping profiles are projected on the facet bodies
License requirements: None.
alongDirection() - Method in interface nxopen.tooling.DieBaseBuilder: Returns the direction options.
alongFaceNormal() - Method in interface nxopen.features.sheetmetal.MigratedPanelBuilder: Returns the along face normal flag.
AlongGuideCut - Interface in nxopen.features.shipdesign: Represents a corner cut feature
To create or edit an instance of this class, use AlongGuideCutBuilder

Created in NX8.5.0
AlongGuideCutBuilder - Interface in nxopen.features.shipdesign: Represents a AlongGuideCut builder
To create a new instance of this class, use ShipCollection.createAlongGuideCutBuilder(nxopen.features.shipdesign.AlongGuideCut)
Default values.
AlongGuideCutBuilder.CreationMethod - Class in nxopen.features.shipdesign: Creation method used to define the placement of the along guide cut
AlongGuideCutBuilder.WaterStopOffsetMethod - Class in nxopen.features.shipdesign: Offset option used to define the placement of the water stop guide cut
AlongMachineAxisMoveBuilder - Interface in nxopen.cam: Represents Along MCS Axis Move Builder
To create a new instance of this class, use MoveCollection.createAlongMcsAxisMoveBuilder(nxopen.cam.Move)

Created in NX5.0.0
AlongMcsAxisMoveBuilder - Interface in nxopen.cam: Represents Along MCS Axis Move Builder
To create a new instance of this class, use MoveCollection.createAlongMcsAxisMoveBuilder(nxopen.cam.Move)

Created in NX5.0.0
alongOrientationOption() - Method in interface nxopen.geometricutilities.PatternOrientation: Returns the orientationOption for Along pattern type
License requirements: None.
alongPathAngle() - Method in interface nxopen.features.GeomcopyBuilder: Returns the angle dimension used for along path type of instancing.
alongPathDefinition() - Method in interface nxopen.geometricutilities.PatternDefinition: Returns the along path definition.
AlongPathPattern - Interface in nxopen.geometricutilities: the AlongPath pattern definition.
AlongPathPattern.PathOptions - Class in nxopen.geometricutilities: This defines path options
AlongPathPattern.YDirectionOptions - Class in nxopen.geometricutilities: This defines y direction Types
alongPathRotationAngle() - Method in interface nxopen.geometricutilities.PatternOrientation: Returns the along path rotation angle for the Along type pattern Normal to Path option.
AlongSpineBuilder - Interface in nxopen.geometricutilities: Represents a AlongSpineBuilder
Created in NX5.0.0
AlongSpineBuilder.RetainSpineOption - Class in nxopen.geometricutilities: Represents the Spine option.
alongSpineData() - Method in interface nxopen.geometricutilities.LawBuilder: Returns the linear or cubic along spine law.
AlongToolAxisMoveBuilder - Interface in nxopen.cam: Represents the Move To Point Builder
To create a new instance of this class, use MoveCollection.createAlongToolAxisMoveBuilder(nxopen.cam.Move)

Created in NX5.0.0
ALONGX - Static variable in class nxopen.bodydes.OnestepUnformBuilder.DisplaySpringbackMode: Onestep display springback mode is along X
ALONGY - Static variable in class nxopen.bodydes.OnestepUnformBuilder.DisplaySpringbackMode: Onestep display springback mode is along Y
ALONGZ - Static variable in class nxopen.bodydes.OnestepUnformBuilder.DisplaySpringbackMode: Onestep display springback mode is along Z
ALPHA_NUM - Static variable in class nxopen.ExpressionCollection.SortType: Alphabetic order, with numbers in numerical order
ALPHABETIC - Static variable in class nxopen.drawings.ViewCommonViewLabelBuilder.SecondaryIndexingType
ALPHABETIC - Static variable in class nxopen.tooling.HoleManufacturingNoteBuilder.HoleIndexType
ALPHABETIC_COMPONENT - Static variable in class nxopen.assemblies.Order.Type: System defined alphabetic component order
ALPHABETICAL - Static variable in class nxopen.DxfdwgImporter.ProcessingOrderAs: Alphabetical
ALPHANUMERIC_COMPONENT - Static variable in class nxopen.assemblies.Order.Type: System defined alphanumeric component order
alreadyexisted - Variable in class nxopen.assemblies.productinterface.ObjectBuilder.AddProductInterfaceData
ALT_ID_INVALID - Static variable in class nxopen.uf.UFUgmgr.AltIdStatus
ALT_ID_MODIFIED - Static variable in class nxopen.uf.UFUgmgr.AltIdStatus
ALT_ID_OVERRIDE - Static variable in class nxopen.uf.UFUgmgr.AltIdStatus
ALT_ID_VALID - Static variable in class nxopen.uf.UFUgmgr.AltIdStatus
ALTAIR_HYPER_OPT - Static variable in class nxopen.cae.optimization.Solver: Altair HyperOpt: Deprecated in NX10
ALTERNATE - Static variable in class nxopen.cam.CutParametersFinishPassesTypes: Alternate
ALTERNATE - Static variable in class nxopen.cam.RoughFinishTurningBuilder.CutRegionsTypes: Cut regions type: Alternate
ALTERNATE - Static variable in class nxopen.cam.SpringPasses.Types: Alternate Spring Passes: Alternate
ALTERNATE - Static variable in class nxopen.cam.WedmCutParameters.CutDirectionTypes: alternating cut direction
alternateAngle() - Method in interface nxopen.annotations.BaseAngularDimensionBuilder: Alternate angle
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING") OR solid_modeling ("SOLIDS MODELING")
.
alternateArrow() - Method in interface nxopen.annotations.CuttingPlaneSymbolBuilder: The Cutting Plane Symbol Alternate Arrow
License requirements: None.
alternateDescription - Variable in class nxopen.pdm.AlternateIdManager.AlternateIdsData: the new value for the alternate Description
AlternateIdManager - Interface in nxopen.pdm: This class is responsible for setting and getting NX Manager database attribute.
AlternateIdManager.AlternateIdsData - Class in nxopen.pdm: Contains alternate Ids data
AlternateIdManager.AssignAlternateIdData - Class in nxopen.pdm: This class holds the data returned from AlternateIdManager.assignAlternateId()
AlternateIdManager.AssignAlternateRevData - Class in nxopen.pdm: Contains alternate Revision Id data
AlternateIdsData() - Constructor for class nxopen.pdm.AlternateIdManager.AlternateIdsData
AlternateIdsData(String, String, String, String, boolean) - Constructor for class nxopen.pdm.AlternateIdManager.AlternateIdsData: Constructor for the AlternateIdsData object.
alternateItemId - Variable in class nxopen.pdm.AlternateIdManager.AlternateIdsData: the new value for the alternate item ID
alternateItemId - Variable in class nxopen.pdm.AlternateIdManager.AssignAlternateIdData: the newly generated alternate item ID value that was set on this manager
alternateMethod() - Method in interface nxopen.features.SectionSurfaceBuilder: Deprecated.
Deprecated in NX9.0.0. Use SectionSurfaceBuilderEx instead.
alternateMethod() - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder: Returns the option to use the system provided alternate method to create transition parting surface.
alternateName - Variable in class nxopen.pdm.AlternateIdManager.AlternateIdsData: the new value for the alternate Name
alternatePlane() - Method in interface nxopen.display.DynamicSectionBuilder: Cycle through planes that are 90 degrees aligned to the current section plane.
alternateResult() - Method in interface nxopen.tooling.BendOperationBuilder: Returns the switch to set if use an alternate result.
alternateRevId - Variable in class nxopen.pdm.AlternateIdManager.AlternateIdsData: the new value for the alternate Revision ID
alternateRevId - Variable in class nxopen.pdm.AlternateIdManager.AssignAlternateIdData: the newly generated alternate revision ID value that was set on this manager
alternateRevId - Variable in class nxopen.pdm.AlternateIdManager.AssignAlternateRevData: the new value the alternate Revision ID
alternateSolution() - Method in interface nxopen.DatumConstraint: Returns
License requirements: solid_modeling ("SOLIDS MODELING")
.
alternateSolution() - Method in interface nxopen.features.sheetmetal.GussetBuilder: Cycles the available solutions when a user defined profile intersects the solid body.
alternateSolution() - Method in interface nxopen.features.StyledSweepBuilder: Returns the alternate solution.
alternateSolution(int) - Method in interface nxopen.SketchIntersectionCurveBuilder: Method to get the alternate solution corresponding to solutionIndex
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
alternateSolutions() - Method in interface nxopen.features.SectionSurfaceBuilderEx: Returns the alternate method.
alternateSolutionType() - Method in interface nxopen.features.DatumAxisBuilder: Returns the alternate solution type.
alternativeAngle() - Method in interface nxopen.features.AngularDimBuilder: Returns the alternative angle toggle allows you to compute angle that is 360 degree subtracts current angle
License requirements: None.
alterResult() - Method in interface nxopen.tooling.DirectUnbendBuilder: Returns the switch to set if use an alternate result.
altItemId - Variable in class nxopen.uf.UFUgmgr.AssignAlternatePartIdData
altRevId - Variable in class nxopen.uf.UFUgmgr.AssignAlternatePartIdData
ALUMINUM - Static variable in class nxopen.die.TrimLineDevelopmentBuilder.MaterialTypeName: Aluminum
ALWAYS - Static variable in class nxopen.cae.xyplot.Preference.NewWindowChoice: Always show plot graph on a new separate graphic window
ALWAYS - Static variable in class nxopen.cam.HoleMakingBuilder.ModelDepthTypes: always
ALWAYS - Static variable in class nxopen.display.BoundedGridBuilder.ShowLabelType: Always show label
ALWAYS - Static variable in class nxopen.mechatronics.DisplayChangerBuilder.ExecuteModes: Always execute
ALWAYS - Static variable in class nxopen.mechatronics.ReadWriteDeviceBuilder.ExecuteMode: Always execute
ALWAYS_CREATE_NEW - Static variable in class nxopen.cam.FeatureProcessBuilder.FeatureGroupingType: Always create a new feature group
ALWAYS_DISPLAY - Static variable in class nxopen.validate.ValidatorOptions.ResultsDisplayModeTypes: Always display results.
ALWAYS_FIRST - Static variable in class nxopen.blockstyler.Tree.NodeInsertOption: Node is placed first in the hierarchy in which it is inserted.
ALWAYS_LAST - Static variable in class nxopen.blockstyler.Tree.NodeInsertOption: Node is placed last in the hierarchy in which it is inserted.
ALWAYS_REPOSITION - Static variable in class nxopen.cae.AssyFEModel.RepositionType: always reposition
ALWAYS_SAVE - Static variable in class nxopen.validate.RequirementCheck.SaveResultsToTeamcenterOptions: Always perform save
ALWAYS_SAVE - Static variable in class nxopen.validate.ValidatorOptions.SaveModeTypes: Always perform save
ALWAYS_SET_DISPLAY_PART - Static variable in class nxopen.shapesearch.ShapeSearchBuilder.OpenPartType: Always set the opened part as display part whether it exists in the session
alwaysEvaluated() - Method in interface nxopen.motion.SignalChartListItem: Returns the always evaluated
License requirements: nx_motion_motor ("NX Motion Motor")
.
alwaysUpdateDialogs() - Method in interface nxopen.cam.Preferences: Returns the auto update dialog
License requirements: None.
alwaysVertical() - Method in interface nxopen.annotations.DatumData: Returns the flag indicating whether the datum is always vertical (without the stub)
License requirements: None.
amAddPasses() - Method in interface nxopen.cam.AreaMillingNonSteepContainment: Returns the Additional Passes
License requirements: None.
amAddPasses() - Method in interface nxopen.cam.DmAmBuilder: Returns the Additional Passes
License requirements: None.
AMAG - Static variable in class nxopen.motion.GraphBuilder.ComponentChoices: Angular Magnitude
amAutoPatCenter() - Method in interface nxopen.cam.AreaMillingNonSteepContainment: Returns the Area Milling Auto Pattern Center
License requirements: None.
amAutoPatCenter() - Method in interface nxopen.cam.DmAmBuilder: Returns the Area Milling Auto Pattern Center
License requirements: None.
AMBIENT - Static variable in class nxopen.Light.SceneType: Light from all around the model
AMBIENT - Static variable in class nxopen.LightType: An ambient light provides global illumination for the scene.
AMBIENT_LIGHT - Static variable in class nxopen.uf.UFView.LightType
ambientFactor - Variable in class nxopen.DisplayManager.J3dMaterial: ambient light coeficient
ambientOcclusion() - Method in interface nxopen.display.Shadows: Returns the shadows SSAO ambient occlusion
License requirements: None.
amCutPattern() - Method in interface nxopen.cam.DmAmBuilder: Returns the Cut Pattern value
License requirements: None.
amCutRegionStartEnum() - Method in interface nxopen.cam.DmAmBuilder: Returns the Cut Region Start Point
License requirements: None.
amCutTraversal() - Method in interface nxopen.cam.DmAmBuilder: Returns the Cut Traversal value
License requirements: None.
AMPLITUDE - Static variable in class nxopen.cae.DurabilityEventFatigueSettingsBuilder.FatigueSafetyFactorMethodEnum: Amplitude
AMPLITUDE - Static variable in class nxopen.cae.Result.Complex
amplitude() - Method in interface nxopen.drawings.BrokenViewBuilder: Returns the break line amplitude
License requirements: None.
amplitude - Variable in class nxopen.mechatronics.CamProfileBuilder.Element: segment polynomial coefficient
amplitude() - Method in interface nxopen.motion.DriverOperation: Deprecated.
Deprecated in NX8.0.0. Obtain the expression using DriverOperation.amplitudeExpression() to query or edit it.
amplitude - Variable in class nxopen.uf.UFMotion.JointMotionInput
AMPLITUDEAND_MEAN - Static variable in class nxopen.cae.DurabilityEventFatigueSettingsBuilder.FatigueSafetyFactorMethodEnum: AmplitudeandMean
amplitudeExpression() - Method in interface nxopen.motion.DriverOperation: Returns the amplitude expression
License requirements: None.
amPocketDir() - Method in interface nxopen.cam.AreaMillingNonSteepContainment: Returns the Pocketing Direction value
License requirements: None.
amPocketDir() - Method in interface nxopen.cam.DmAmBuilder: Returns the Pocketing Deriction value
License requirements: None.
amSteepOption() - Method in interface nxopen.cam.DmAmBuilder: Returns the Area Milling Steep Option
License requirements: None.
analFacetAngleTol - Variable in class nxopen.uf.UFDisp.SrfanlData
analFacetChordTol - Variable in class nxopen.uf.UFDisp.SrfanlData
analFacetEdgeTol - Variable in class nxopen.uf.UFDisp.SrfanlData
analFacetWidthTol - Variable in class nxopen.uf.UFDisp.SrfanlData
analyMode() - Method in interface nxopen.tooling.ValidCheckBuilder: Returns the analysis mode
License requirements: None.
ANALYSIS_GEOMETRY - Static variable in class nxopen.uf.UFDieeng.Opts
ANALYSIS_OBJECT - Static variable in class nxopen.geometricanalysis.DeviationGaugeBuilder.ReportingPerTypes: Per Analysis Object
ANALYSIS_OBJECT - Static variable in class nxopen.geometricanalysis.DraftAnalysisBuilder.SelectOutput: analysis object;
ANALYSIS_OBJECT - Static variable in class nxopen.geometricanalysis.sectionanalysis.SectionAnalysisBuilder.OutputType: Analysis Object
ANALYSIS_OBJECT - Static variable in class nxopen.geometricanalysis.sectionanalysis.SectionAnalysisExBuilder.OutputType: Analysis Object
ANALYSIS_SHADED - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.ViewMode: The view is analysis shaded
AnalysisDisplay() - Constructor for class nxopen.uf.UFCurve.AnalysisDisplay
AnalysisDisplay(double, boolean, boolean, boolean, boolean, boolean, double, int, double, double, boolean, double, int, double[]) - Constructor for class nxopen.uf.UFCurve.AnalysisDisplay
analysisManager() - Method in interface nxopen.BasePart: Returns the GeometricAnalysisManager for part .
AnalysisManager - Interface in nxopen.geometricanalysis: Represents the collection of analysis commands
To obtain an instance of this class, refer to BasePart

Created in NX5.0.0
analysisMode - Variable in class nxopen.assemblies.ClearanceSet.Summary: The analysis mode.
analysisMode - Variable in class nxopen.uf.UFClear.Summary
AnalysisObject - Interface in nxopen.geometricanalysis: Represents an Analysis Object
This is an abstract class, and cannot be instantiated
.
AnalysisObjectCollection - Interface in nxopen.geometricanalysis: Create a AnalysisObjectCollection
To obtain an instance of this class, refer to AnalysisManager

Created in NX5.0.0
analysisObjects() - Method in interface nxopen.geometricanalysis.AnalysisManager: Returns the AnalysisObjectCollection instance belonging to this part .
analysisPoint() - Method in interface nxopen.geometricanalysis.DupinBuilder: Returns the point location defining where the analysis should be done.
analysisSolution() - Method in interface nxopen.cae.optimization.DAOSolutionBuilder: Returns the optimization solution analysis solution
License requirements: None.
analysisSpacing() - Method in interface nxopen.features.shipdesign.ShipDesignPreferencesBuilder: Returns the distance between points on the path used to check twist rate or surface angle.
analysisType() - Method in interface nxopen.cae.responsesimulation.RSEventAttributes: Returns the analysis type.
analysisType() - Method in interface nxopen.cae.SimSolution: Returns the analysis type
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
analysisType() - Method in interface nxopen.cam.NCAssistantBuilder: Returns the Analysis Type
License requirements: None.
analysisType() - Method in interface nxopen.geometricutilities.CombOptionsBuilder: Returns the analysis type
License requirements: None.
analysisType() - Method in interface nxopen.motion.MotionSolutionBuilder: Returns the analysis type
License requirements: None.
analysisType - Variable in class nxopen.uf.UFSf.AskLanguageData
analysisTypeName - Variable in class nxopen.cae.BaseFemPart.SolverAndAnalysisTypeData: the name of the analysis type.
ANALYZE - Static variable in class nxopen.facet.CleanupFacetBodyBuilder.CleanupOptions: Perform Analysis
analyzeAll() - Method in interface nxopen.cam.InspectionAnalyzeBuilder: Run Analysis for All Operations
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
analyzedfaces - Variable in class nxopen.cam.NCAssistantBuilder.ResultsData: the faces found during analyze run, it is need SM_free
analyzeFormability(String) - Method in interface nxopen.tooling.LsdynaKfileGeneratorBuilder: Analyzes the formability based on the input K file.
analyzeGeometry() - Method in interface nxopen.cam.NCAssistantBuilder: The action of Analyze Geometry button.
AnalyzePocket - Interface in nxopen.features: Represents a analyze pocket feature.
AnalyzePocketBuilder - Interface in nxopen.features: Represents a AnalyzePocket builder for Analyze Pocket feature.
AnalyzePocketBuilder.AngledWallSolutions - Class in nxopen.features: Represents the solution which defines how the End Mill is positioned with the angled walls.
AnalyzePocketBuilder.ToolTypes - Class in nxopen.features: Represents the tool type which defines how the angled walls are cut.
analyzeSelected(CAMObject[]) - Method in interface nxopen.cam.InspectionAnalyzeBuilder: Run Analysis for Selected Operations
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
ancestorNames - Variable in class nxopen.uf.UFKf.AskAncestorClassesData
anchor() - Method in interface nxopen.annotations.MasterCustomSymbolData: Deprecated.
Deprecated in NX9.0.0. Use MasterSymbolBuilder instead.
anchor() - Method in interface nxopen.annotations.OriginBuilder: Returns the anchor location of the origin on the annotation
License requirements: None.
anchor() - Method in interface nxopen.annotations.RegionBuilder: Returns the anchor Only available when region type is RegionBuilder.Types.RECTANGULAR_REGION , RegionBuilder.Types.CIRCULAR_REGION , RegionBuilder.Types.ANNULAR_REGION
License requirements: None.
anchor() - Method in interface nxopen.geometricutilities.ShapeFrameBuilder: Returns the anchor of the frame
License requirements: None.
Anchor - Interface in nxopen.routing: A Routing Anchor defines a position in a Qualified Routing component part.
ANCHOR - Static variable in class nxopen.Sketch.ConstraintPointType: The anchor point of a conic
ANCHOR - Static variable in class nxopen.uf.UFDisp.PolyMarker
anchor - Variable in class nxopen.uf.UFRoute.AskAppViewDefStockData
ANCHOR - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
ANCHOR_POINT - Static variable in class nxopen.Sketch.AssocType: The anchor of a conic
ANCHOR_POINT - Static variable in class nxopen.uf.UFSket.AssocType
ANCHOR_VERTEX - Static variable in class nxopen.uf.UFSket.GeomVertex
anchorageLocation() - Method in interface nxopen.features.vehicledesign.SeatBeltAnchorageBuilder: Returns the anchorage location type
License requirements: None.
anchorAttachment() - Method in interface nxopen.geometricutilities.ShapeFrameBuilder: Returns the anchor attachment
License requirements: None.
anchorBaseRadius() - Method in interface nxopen.die.QuickBinderBuilder: Returns the base radius for a conical anchor face.
anchorCenter() - Method in interface nxopen.display.NonProportionalZoom: Returns a value indicating if the display will be recentered on the initial line endpoint
License requirements: None.
AnchorCollection - Interface in nxopen.routing: Represents a collection of Anchor objects.
anchorLocation() - Method in interface nxopen.geometricutilities.FrameOnPathBuilder: Returns the anchor location
License requirements: None.
anchorLocation() - Method in interface nxopen.geometricutilities.RectangularFrameBuilder: Returns the anchor location
License requirements: None.
anchorLocator() - Method in interface nxopen.geometricutilities.RectangularFrameBuilder: Returns the point or coordinate system to define initial location and orientation of the frame
License requirements: None.
AnchorLocatorBuilder - Interface in nxopen.geometricutilities: Represents a AnchorLocatorBuilder
Created in NX6.0.0
anchorObject() - Method in interface nxopen.markup.MarkupObject: Returns the anchor object
License requirements: None.
anchorOrigin() - Method in interface nxopen.geometricanalysis.sectionanalysis.XYZPlaneBuilder: Returns the anchor position
License requirements: None.
anchorPoint() - Method in interface nxopen.annotations.MasterSymbolBuilder: Returns the anchor point
License requirements: None.
anchorPoint() - Method in interface nxopen.features.GeneralConicBuilder: Returns the anchor point.
AnchorPoint - Interface in nxopen.features.shipdesign: Represents a AnchorPoint builder.
anchorPoint() - Method in interface nxopen.features.shipdesign.PillarBuilder: Returns the anchor point.
anchorPoint() - Method in interface nxopen.features.shipdesign.PillarSystemBuilder: Returns the anchor point.
anchorPoint() - Method in interface nxopen.features.shipdesign.StiffenerStockBuilder: Returns the anchor point for profiles only.
anchorpoint - Variable in class nxopen.layout2d.Component.AnchorPointData
anchorPoint() - Method in interface nxopen.layout2d.DefineComponentAnchorPointBuilder: Returns the anchor point of a 2D Component
License requirements: None.
anchorPoint() - Method in interface nxopen.layout2d.DefineComponentBuilder: Returns the anchor point to define the 2D Component
License requirements: None.
anchorPoint() - Method in interface nxopen.mechatronics.BallJointBuilder: Returns the anchor point.
anchorPoint() - Method in interface nxopen.mechatronics.CylindricalJointBuilder: Returns the anchor point.
anchorPoint() - Method in interface nxopen.mechatronics.VirtualAxisBuilder: Returns the anchor point
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
anchorPoint - Variable in class nxopen.uf.UFDraw.ViewInfo
anchorPoint - Variable in class nxopen.uf.UFDrf.CustomSymbol
anchorPoint - Variable in class nxopen.uf.UFDrf.SymbolData
anchorPoint - Variable in class nxopen.uf.UFDrf.UdSymbolFontInfo
AnchorPointData() - Constructor for class nxopen.layout2d.Component.AnchorPointData
AnchorPointList - Interface in nxopen.features.shipdesign: Represents a list of objects.
anchorPosition() - Method in interface nxopen.geometricutilities.CurveRangeBuilder: Returns the anchor position
License requirements: None.
anchorPosition() - Method in interface nxopen.geometricutilities.FrameOnPathBuilder: Returns the anchor position
License requirements: None.
anchorPosition() - Method in interface nxopen.geometricutilities.SurfaceRangeBuilder: Returns the anchor position
License requirements: None.
anchorRadius() - Method in interface nxopen.die.QuickBinderBuilder: Returns the radius value of a cylidrical anchor face.
anchorrcp - Variable in class nxopen.formboard.ShapeSegmentBuilder.LineData
anchors() - Method in interface nxopen.routing.RouteManager: Anchor collection .
anchors - Variable in class nxopen.uf.UFRoute.AskStockDataAnchorsData
anchorseg - Variable in class nxopen.formboard.ShapeSegmentBuilder.LineData
anchorsegdir - Variable in class nxopen.routing.EditBendAngleBuilder.SelectedBendData: The anchor Segment
anchorTag - Variable in class nxopen.uf.UFDrf.SymbolCreateData
anchorTag - Variable in class nxopen.uf.UFRoute.LoadStockData
anchorTopRadius() - Method in interface nxopen.die.QuickBinderBuilder: Returns the top radius for a conical anchor face.
anchorType() - Method in interface nxopen.display.DecalBuilder: Returns the anchor type
License requirements: None.
anchorXAxis() - Method in interface nxopen.geometricanalysis.sectionanalysis.XYZPlaneBuilder: Returns the anchor X axis
License requirements: None.
anchorYAxis() - Method in interface nxopen.geometricanalysis.sectionanalysis.XYZPlaneBuilder: Returns the anchor Y axis
License requirements: None.
AND_CONDITION - Static variable in class nxopen.visualreporting.Condition.TypeOption
ANG_ANG_PLANE - Static variable in class nxopen.cam.NcmPlanarEngRetBuilder.EngRetTypes: Linear to plane
ANG_DISPLAY_ZEROS - Static variable in class nxopen.uf.UFDrf.AngularSuppressZeros
ANG_SUPPRESS_ANY_ZEROS - Static variable in class nxopen.uf.UFDrf.AngularSuppressZeros
ANG_SUPPRESS_LEADING_ZEROS - Static variable in class nxopen.uf.UFDrf.AngularSuppressZeros
ANG_SUPPRESS_TRAILING_ZEROS - Static variable in class nxopen.uf.UFDrf.AngularSuppressZeros
angle() - Method in interface nxopen.annotations.Associativity: Returns the angle.
angle() - Method in interface nxopen.annotations.AssociativityBuilder: Returns the angle
License requirements: None.
ANGLE - Static variable in class nxopen.annotations.AssociativityLineOption: At angle
angle() - Method in interface nxopen.annotations.BaseCustomSymbolBuilder: Returns the angle
License requirements: None.
angle() - Method in interface nxopen.annotations.CenterMarkSettingsBuilder: Returns the angle of rotation for Center Marks
License requirements: None.
angle() - Method in interface nxopen.annotations.CustomSymbolData: Deprecated.
Deprecated in NX9.0.0. Use Annotations.DraftingCustomSymbolBuilder for Drafting Custom Symbol and Annotations.PmiCustomSymbolBuilder for PMI Custom Symbol objects.
angle() - Method in interface nxopen.annotations.DraftingSurfaceFinishBuilder: Returns the angle
License requirements: None.
angle() - Method in interface nxopen.annotations.ForeshorteningSymbolSettingsBuilder: Returns the foreshortening symbol angle
License requirements: None.
angle() - Method in interface nxopen.annotations.HatchBuilder: Deprecated.
Deprecated in NX7.5.0. Use HatchFillSettingsBuilder instead.
angle() - Method in interface nxopen.annotations.HatchFillSettingsBuilder: Returns the angle
License requirements: None.
ANGLE - Static variable in class nxopen.annotations.HoleCalloutSettingsBuilder.Parametertype
angle() - Method in interface nxopen.annotations.LetteringPreferences: Returns the angle
License requirements: None.
angle() - Method in interface nxopen.annotations.LetteringStyleBuilder: Returns the angle for general text
License requirements: None.
angle - Variable in class nxopen.annotations.OrdinateDimension.DoglegPreferences
angle() - Method in interface nxopen.annotations.SurfaceFinishBuilder: Returns the angle
License requirements: None.
angle() - Method in interface nxopen.annotations.TargetPointBuilder: Returns the angle
License requirements: None.
angle() - Method in interface nxopen.cae.ElementRevolveBuilder: Returns the angle
License requirements: None.
ANGLE - Static variable in class nxopen.cae.MeshControlBuilder.FilletCircumferenceSizeType
angle() - Method in interface nxopen.cae.NodeRotateBuilder: Returns the angle
License requirements: None.
angle() - Method in interface nxopen.cae.optimization.TBSShapeLinkCondition: Returns the angle for repeating segments or demold restrictions
License requirements: None.
ANGLE - Static variable in class nxopen.cae.Result.Quantity
angle() - Method in interface nxopen.cam.BoundaryTurnMemberCorner: Returns the corner angle value
License requirements: None.
ANGLE - Static variable in class nxopen.cam.CircularAboutAxisMoveBuilder.EndType: Angle
ANGLE - Static variable in class nxopen.cam.CircularAboutAxisMoveBuilder.ExtensionType: Angle
angle() - Method in interface nxopen.cam.FormEdgesBuilder: Returns the angle value
License requirements: None.
ANGLE - Static variable in class nxopen.cam.InspectionAlignmentBuilder.RotationMethods: Rotate by absolute angle
angle() - Method in interface nxopen.cam.LaserCutoutDefinition: Returns the Angle
License requirements: None.
ANGLE - Static variable in class nxopen.cam.NcmHoleMachining.OverlapTypes: angle
angle() - Method in interface nxopen.cam.NormalToToolAxisMoveBuilder: Returns the angle
License requirements: None.
angle() - Method in interface nxopen.cam.RotateToolMoveBuilder: Returns the Orient Angle
License requirements: None.
angle() - Method in interface nxopen.cam.SteepContainment: Returns the angle
License requirements: None.
angle - Variable in class nxopen.cam.StepParamsBuilder.Data: the angle
angle() - Method in interface nxopen.cam.ToolAxisTilt: Returns the tool axis tilt angle
License requirements: None.
angle() - Method in interface nxopen.cam.ToolChangeCiBuilder: Returns the Tool angle builder
License requirements: None.
angle - Variable in class nxopen.cam.TrackingBuilder.Data: the angle
angle() - Method in interface nxopen.cam.TrimPoint: Returns the trim point angle
License requirements: None.
ANGLE - Static variable in class nxopen.cam.TrimPoint.AngleOptions: Angle is defined by a value.
ANGLE - Static variable in class nxopen.cam.TrimPoint.RampAngleOptions: Ramp angle is defined by a value.
angle() - Method in interface nxopen.cam.TurnEngageRetractBuilder: Returns the Angle
License requirements: None.
angle() - Method in interface nxopen.cam.TurnThreadEngageRetractBuilder: Returns the angle
License requirements: None.
ANGLE - Static variable in class nxopen.cam.TurnThreadEngageRetractBuilder.EngageRetractTypes: Angle
angle - Variable in class nxopen.cam.UdtSectionBuilder.Data: the angle
ANGLE - Static variable in class nxopen.DatumConstraint.Type
ANGLE - Static variable in class nxopen.die.AddendumSectionBuilder.SegmentParameterType: The angle parameter of a straight segment.
angle() - Method in interface nxopen.die.FlangeSteelRibChildBuilder: Returns the angle of the Flange Steel Rib
License requirements: ug_die_design ("Die Design")
.
angle() - Method in interface nxopen.die.FlangeSteelRibParentBuilder: Returns the angle of the Flange Steel Ribs
License requirements: ug_die_design ("Die Design")
.
angle() - Method in interface nxopen.die.RibChildBuilder: Returns the angle of the die rib.
angle() - Method in interface nxopen.die.RibParentBuilder: Returns the angle of die ribs.
angle() - Method in interface nxopen.drawings.GeneralViewStyle: Returns the value of angle of a member view.
angle() - Method in interface nxopen.drawings.SectionLineSegmentBuilder: Returns the angle.
ANGLE - Static variable in class nxopen.drawings.SectionLineSegmentBuilder.Types: Section line cut segment used by: PointAndAngleSectionLineBuilder .
angle() - Method in interface nxopen.EndCutBlockBuilder: Returns the angle
License requirements: None.
angle() - Method in interface nxopen.features.AdmResizeFaceBuilder: Returns the angle to resize, only for cones.
angle() - Method in interface nxopen.features.ChamferBuilder: Returns the chamfer angle (expression).
ANGLE - Static variable in class nxopen.features.DatumAxisBuilder.ConstraintType: Angle constraint
ANGLE - Static variable in class nxopen.features.DatumPlaneBuilder.ConstraintType: Angle constraint
angle() - Method in interface nxopen.features.EmbossSidewall: Returns the sidewall defaults taper angle
License requirements: None.
angle() - Method in interface nxopen.features.EmbossTaper: Returns the emboss taper angle
License requirements: None.
ANGLE - Static variable in class nxopen.features.GlobalShapingBuilder.RotationMethodType: Rotation specified by angle
angle() - Method in interface nxopen.features.MoveFaceBuilder: Returns the angle for axis and angle option, don't use it until nx502
License requirements: None.
angle() - Method in interface nxopen.features.PatternFaceBuilder: Returns the angle between circular pattern, don't use it until nx502
License requirements: None.
angle() - Method in interface nxopen.features.ResizeChamferBuilder: Returns the angle
License requirements: None.
angle() - Method in interface nxopen.features.ResizeFaceBuilder: Returns the angle to resize, only for cones. don't use it until nx502
License requirements: None.
angle() - Method in interface nxopen.features.RibbonBuilder: Returns the angle to offset measured from the offset view
License requirements: None.
angle() - Method in interface nxopen.features.sheetmetal.AeroFlangeBuilder: Returns the angle expression.
ANGLE - Static variable in class nxopen.features.sheetmetal.AeroFlangeBuilder.CompType: Angle
angle() - Method in interface nxopen.features.sheetmetal.AeroLighteningCutoutBuilder: Returns the angle
License requirements: None.
angle() - Method in interface nxopen.features.sheetmetal.BeadBuilder: Returns the angle of the bead.
ANGLE - Static variable in class nxopen.features.sheetmetal.BendTaperBuilder.BendTaperInputMethod: Angle
angle() - Method in interface nxopen.features.sheetmetal.ResizeBendAngleBuilder: Returns the bend angle
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
ANGLE - Static variable in class nxopen.features.shipdesign.OrientationAngleMethodsBuilder.MethodTypes: Angle is defined by specifying a constant angle from a reference object.
ANGLE - Static variable in class nxopen.features.shipdesign.PlateChamferBuilder.AngleMethod: Use the angle for the chamfer parameters
angle() - Method in interface nxopen.features.shipdesign.RollingLineBuilder: Returns the angle for either the max amount of rotation at a point for manual type.
angle() - Method in interface nxopen.features.shipdesign.StiffenerBySupportPathBuilder: Returns the angle of horizontal or vertical method, in degrees
License requirements: None.
angle() - Method in interface nxopen.features.vehicledesign.PendulumPlacementBuilder: Returns the rotation angle of this pendulum.
ANGLE - Static variable in class nxopen.formboard.OrientBranchBuilder.BranchAngleMethod: method to rotate branch by angle
angle - Variable in class nxopen.formboard.ShapeSegmentBuilder.LineData
angle() - Method in interface nxopen.geometricanalysis.DupinBuilder: Returns the deviation in degrees from the minimum curvature.
ANGLE - Static variable in class nxopen.geometricutilities.AlignmentMethodBuilder.Type
ANGLE - Static variable in class nxopen.geometricutilities.AngularPatternSpacing.UsePitchOptions: angle is pitch value
angle() - Method in interface nxopen.geometricutilities.ModlDistanceAngle: Returns the value of angular transform.
angle() - Method in interface nxopen.geometricutilities.ModlMotion: Returns the angle of ModlMotion.Options.ANGLE motion option.
ANGLE - Static variable in class nxopen.geometricutilities.ModlMotion.Options: Move by Angle
ANGLE - Static variable in class nxopen.motion.PackagingMeasureBuilder.MeasureType: Measure angle between lines or linear edges.
ANGLE - Static variable in class nxopen.PlaneTypes.MethodType: Angle method
ANGLE - Static variable in class nxopen.positioning.Constraint.Type: Two geometries have a specified angle between them
angle - Variable in class nxopen.routing.EditBendAngleBuilder.SelectedBendData: Teh angle between the two segments
ANGLE - Static variable in class nxopen.Scalar.DimensionalityType
angle() - Method in interface nxopen.SketchChamferBuilder: Returns the angle for Offset and Angle Chamfer
License requirements: drafting ("DRAFTING") OR solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
ANGLE - Static variable in class nxopen.tooling.CoolingDefineChannelBuilder.TipEndTypes: Angle tip
ANGLE - Static variable in class nxopen.tooling.CoolingExtendBuilder.TipEndTypes: Angle tip
angle() - Method in interface nxopen.tooling.ElectrodeBlankBuilder: Returns the angle of the joint object.
ANGLE - Static variable in class nxopen.uf.UFCurve.ConstraintType
angle - Variable in class nxopen.uf.UFCurve.Proj
angle - Variable in class nxopen.uf.UFDrf.Areafill
angle - Variable in class nxopen.uf.UFDrf.CustomSymbol
angle - Variable in class nxopen.uf.UFDrf.DraftAidTextInfo
angle - Variable in class nxopen.uf.UFDrf.LetteringPreferences
angle - Variable in class nxopen.uf.UFDrf.SymbolCreateData
angle - Variable in class nxopen.uf.UFDrf.SymbolData
angle - Variable in class nxopen.uf.UFDrf.WeldSymInfo
angle - Variable in class nxopen.uf.UFGdt.AskTargetAreaXhatchData
angle - Variable in class nxopen.uf.UFModl.AskDovetailSlotParmsData
angle - Variable in class nxopen.uf.UFModl.FlangeData
angle - Variable in class nxopen.uf.UFModl.SmbendData
angle - Variable in class nxopen.uf.UFModl.SymbThreadData
angle - Variable in class nxopen.uf.UFModlFeatures.AskCircularPatternFaceData
angle - Variable in class nxopen.uf.UFModlFeatures.AskDatumPlaneParmsData
angle - Variable in class nxopen.uf.UFModlGeneral.AskCircularIsetParmsData
angle - Variable in class nxopen.uf.UFNxsm.FlangeData
angle - Variable in class nxopen.uf.UFSmd.AskBendLineData
angle - Variable in class nxopen.weld.JointExitBuilder.EdgePrepValuesData: The angle of edge preporation for this position.
angle() - Method in interface nxopen.weld.JointmarkPointsBuilder: Returns the angle through which X and Y axis to rotate
License requirements: ugweld ("UG WELD")
.
ANGLE - Static variable in class nxopen.weld.WeldJointBuilder.SplitTypes: At specifed angle.
angle01() - Method in interface nxopen.tooling.PrebendBuilder: Returns the first prebend angle
License requirements: None.
angle02() - Method in interface nxopen.tooling.PrebendBuilder: Returns the second prebend angle
License requirements: None.
angle03() - Method in interface nxopen.tooling.PrebendBuilder: Returns the third prebend angle
License requirements: None.
angle04() - Method in interface nxopen.tooling.PrebendBuilder: Returns the fourth prebend angle
License requirements: None.
angle05() - Method in interface nxopen.tooling.PrebendBuilder: Returns the fifth prebend angle
License requirements: None.
angle1() - Method in interface nxopen.cam.ProbeInspectBorebossMoveBuilder: Returns the 1st custom angle to probe at
License requirements: None.
angle1() - Method in interface nxopen.tooling.DirectUnfoldBuilder: Returns the first angle of prebend.
angle2() - Method in interface nxopen.cam.ProbeInspectBorebossMoveBuilder: Returns the 2nd custom angle to probe at
License requirements: None.
angle2() - Method in interface nxopen.tooling.DirectUnfoldBuilder: Returns the second angle of prebend.
angle3() - Method in interface nxopen.cam.ProbeInspectBorebossMoveBuilder: Returns the 3rd custom angle to probe at
License requirements: None.
angle3() - Method in interface nxopen.tooling.DirectUnfoldBuilder: Returns the third angle of prebend.
ANGLE30 - Static variable in class nxopen.cae.PreTestExciterConfigBuilder.OffAxisAngleChoiceType
ANGLE3D - Static variable in class nxopen.MeasureAngleBuilder.ProjectionType
angle4() - Method in interface nxopen.tooling.DirectUnfoldBuilder: Returns the fourth angle of prebend.
ANGLE45 - Static variable in class nxopen.cae.PreTestExciterConfigBuilder.OffAxisAngleChoiceType
angle5() - Method in interface nxopen.tooling.DirectUnfoldBuilder: Returns the fifth angle of prebend.
angle6() - Method in interface nxopen.tooling.DirectUnfoldBuilder: Returns the sixth angle of prebend.
ANGLE_AND_DISTANCE - Static variable in class nxopen.cam.TurnEngageRetractBuilder.Types: Angle and Distance
ANGLE_BEND - Static variable in class nxopen.uf.UFSmd.AngleTypeE
ANGLE_BETWEEN - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.TolType: Angle Between
ANGLE_DIM - Static variable in class nxopen.uf.UFModl.DfoConstraintType
ANGLE_HELIX_PITCH_AND_SPAN - Static variable in class nxopen.geometricutilities.HelixPattern.SizeOptions: use Angle, Helix Pitch, Span to define a Helix
ANGLE_HELIX_PITCH_AND_TURNS - Static variable in class nxopen.geometricutilities.HelixPattern.SizeOptions: use Angle, Helix Pitch, Turns to define a Helix
ANGLE_INCLUDED - Static variable in class nxopen.uf.UFSmd.AngleTypeE
ANGLE_INVALID_OPTION - Static variable in class nxopen.uf.UFSmd.AngleTypeE
ANGLE_MEASUREMENT - Static variable in class nxopen.uf.UFMotion.MeasurementType
ANGLE_NUM_ITEMS - Static variable in class nxopen.uf.UFSmd.AngleTypeE
ANGLE_SIZE - Static variable in class nxopen.annotations.ChamferForm: 45 x 5
ANGLE_TO_DRIVE - Static variable in class nxopen.cam.ToolAxisInterpolate.InterpolateTypes: Interpolate Types: Angle to Drive
ANGLE_TO_PART - Static variable in class nxopen.cam.ToolAxisInterpolate.InterpolateTypes: Interpolate Types: Angle to Part
ANGLE_TO_VECTOR - Static variable in class nxopen.features.ProjectCurveBuilder.DirectionType: Represents Angle To Vector
ANGLE_XY - Static variable in class nxopen.MeasureAngleBuilder.ProjectionType
angleA() - Method in interface nxopen.cam.InspectionCreatePathsBuilder: Returns the A angle
License requirements: None.
angleA() - Method in interface nxopen.cam.InspectionLinkPmiBuilder: Returns the A angle
License requirements: None.
angleA() - Method in interface nxopen.cam.InspectionMoveBuilder: Returns the A angle for an indexable head
License requirements: None.
anglea - Variable in class nxopen.cam.InspectionPathPointBuilder.PointData: the A angle
angleA() - Method in interface nxopen.cam.InspectionSensorBuilder: Returns the sensor tip location tilt angle component
License requirements: None.
angleA() - Method in interface nxopen.cam.InspectionSensorMassEditBuilder: Returns the angle a
License requirements: None.
AngleAlignmentPointsData() - Constructor for class nxopen.features.MeshSurfaceBuilder.AngleAlignmentPointsData
angleB() - Method in interface nxopen.cam.InspectionCreatePathsBuilder: Returns the B angle
License requirements: None.
angleB() - Method in interface nxopen.cam.InspectionLinkPmiBuilder: Returns the B angle
License requirements: None.
angleB() - Method in interface nxopen.cam.InspectionMoveBuilder: Returns the B angle for an indexable head
License requirements: None.
angleb - Variable in class nxopen.cam.InspectionPathPointBuilder.PointData: the B angle
angleB() - Method in interface nxopen.cam.InspectionSensorBuilder: Returns the sensor tip location rotation angle component
License requirements: None.
angleB() - Method in interface nxopen.cam.InspectionSensorMassEditBuilder: Returns the angle b
License requirements: None.
angleBetween(double[], double[], double[]) - Method in interface nxopen.uf.UFVec3: Refer to UF_VEC3_angle_between for documentation.
ANGLED - Static variable in class nxopen.formboard.FormboardLayoutBuilder.BranchShape: Branch becomes angled at each location that forms a new branch.
angleDecimalPointCharacter() - Method in interface nxopen.drawings.ViewStyleGeneralBuilder: Returns the decimal point character to use for view angle display.
angleDecimalPointFormat() - Method in interface nxopen.drawings.GeneralViewStyle: Returns the decimal point character to use for view angle display.
angleDecimalPointFormat() - Method in interface nxopen.preferences.GeneralViewPreferences: Returns the decimal point character to use for view angle display.
angleDivisions() - Method in interface nxopen.features.shipdesign.RollingLineBuilder: Returns the number of divisions for dividing the angle when using a manual type.
angledWallSolution() - Method in interface nxopen.features.BlendPocketBuilder: Returns the angled wall solution defines how the End Mill is positioned with angled walls.
angleEndPoint() - Method in interface nxopen.cam.InspectionOperationTransformBuilder: Returns the angle end point
License requirements: None.
angleEndPoint() - Method in interface nxopen.cam.OperationTransformBuilder: Returns the angle end point
License requirements: None.
angleEnum() - Method in interface nxopen.cae.CorrelFineTuneAlignmentBuilder: Returns the angle vector enumeration
License requirements: None.
angleExp() - Method in interface nxopen.features.ChamferBuilder: Returns the angle expression object of chamfer.
angleExpression() - Method in interface nxopen.cae.LaminatePly: Returns the ply angle expression, relative to local material orientation
License requirements: None.
angleExpression() - Method in interface nxopen.tooling.RunSimulationBuilder: Returns the angle of the cycle position
License requirements: None.
angleFlag - Variable in class nxopen.uf.UFPath.Rotate
angleFormat() - Method in interface nxopen.drawings.GeneralViewStyle: Returns the format to use for view angle display.
angleFormat() - Method in interface nxopen.drawings.ViewStyleGeneralBuilder: Returns the format to use for view angle display.
AngleFormat - Class in nxopen.preferences: Specifies the view angle display format
angleFormat() - Method in interface nxopen.preferences.GeneralViewPreferences: Returns the format to use for view angle display.
ANGLEFROM_REFERENCE_VECTOR - Static variable in class nxopen.formboard.OrientBranchBuilder.BranchAngleMethod: method to rotate branch with respect to selected vectors
angleLaw() - Method in interface nxopen.features.LawExtensionBuilder: Returns the angle law
License requirements: solid_modeling ("SOLIDS MODELING") OR free_form_modeling ("FREE-FORM MODELING")
.
angleLaw() - Method in interface nxopen.features.LawExtensionBuilderEx: Returns the angle law
License requirements: None.
angleLaw() - Method in interface nxopen.features.SectionSurfaceBuilder: Deprecated.
Deprecated in NX9.0.0. Use SectionSurfaceBuilderEx instead.
angleLaw() - Method in interface nxopen.features.SectionSurfaceBuilderEx: Returns the angle law.
angleLaw() - Method in interface nxopen.features.SilhouetteFlangeBuilder: Returns the angle law.
angleMethod() - Method in interface nxopen.cam.InspectionOperationTransformBuilder: Returns the angle method
License requirements: None.
angleMethod() - Method in interface nxopen.cam.OperationTransformBuilder: Returns the angle method
License requirements: None.
angleMethod() - Method in interface nxopen.features.shipdesign.OrientationAngleMethodsBuilder: Returns the method used to calculate the angle.
angleMethods() - Method in interface nxopen.features.shipdesign.OrientationRegionItemBuilder: Returns the angle definition for the region's orientation.
angleNoseIgnorableSize() - Method in interface nxopen.tooling.FaceColorManagementBuilder: Returns the angle nose ignorable size
License requirements: None.
angleOffset() - Method in interface nxopen.cam.TrimPoint: Returns the trim point angle offset
License requirements: None.
angleOfRotation() - Method in interface nxopen.features.shipdesign.ProfileBuilder: Returns the angle of rotation
License requirements: None.
angleOption() - Method in interface nxopen.cae.ElementRevolveBuilder: Returns the angle option
License requirements: None.
angleOption() - Method in interface nxopen.cam.TrimPoint: Returns the trim point angle option
License requirements: None.
angleOption() - Method in interface nxopen.features.shipdesign.PlateChamferBuilder: Returns the angle option
License requirements: None.
anglePitch() - Method in interface nxopen.geometricutilities.HelixPattern: Returns the angle pitch expression for the Helix type pattern
License requirements: None.
anglePivotPoint() - Method in interface nxopen.cam.InspectionOperationTransformBuilder: Returns the angle pivot point
License requirements: None.
anglePivotPoint() - Method in interface nxopen.cam.OperationTransformBuilder: Returns the angle pivot point
License requirements: None.
anglePrecision() - Method in interface nxopen.drawings.GeneralViewStyle: Returns the precision to use for view angle display.
anglePrecision() - Method in interface nxopen.drawings.ViewStyleGeneralBuilder: Returns the precision to use for view angle display.
anglePrecision() - Method in interface nxopen.preferences.GeneralViewPreferences: Returns the precision to use for view angle display.
angleReference() - Method in interface nxopen.features.shipdesign.OrientationAngleMethodsBuilder: Returns the object used to measure the angle from.
angleResult() - Method in interface nxopen.tooling.BlankNestingBuilder: Returns the angle between processed blank and original blank.
angleRule() - Method in interface nxopen.features.shipdesign.ShipDesignPreferencesBuilder: Returns the indication of how angles are to be measured.
ANGLES - Static variable in class nxopen.drawings.View2dOrientBuilder.CustomMethod: axis rotations
angles - Variable in class nxopen.routing.RouteSweptTwistBuilder.AskExistingTwistData: Number of angles
angleShowLeadingZeros() - Method in interface nxopen.drawings.ViewStyleGeneralBuilder: Returns the status of leading zeros display in view angle.
angleShowTrailingZeros() - Method in interface nxopen.drawings.ViewStyleGeneralBuilder: Returns the status of trailing zeros display in view angle.
angleStartPoint() - Method in interface nxopen.cam.InspectionOperationTransformBuilder: Returns the angle start point
License requirements: None.
angleStartPoint() - Method in interface nxopen.cam.OperationTransformBuilder: Returns the angle start point
License requirements: None.
angleStep() - Method in interface nxopen.tooling.BlankNestingBuilder: Returns the angle increment to use when rotating the blank during the processing to find the best layout.
angleStr - Variable in class nxopen.uf.UFModlFeatures.AskTaperFromEdges1Data
angleStr - Variable in class nxopen.uf.UFModlFeatures.AskTaperFromEdgesData
angleStr - Variable in class nxopen.uf.UFSubdiv.Isocline
angleString() - Method in interface nxopen.cam.InspectionCreatePathsBuilder: Deprecated.
Deprecated in NX9.0.0. Use AngleA and AngleB instead.
angleString() - Method in interface nxopen.cam.InspectionLinkPmiBuilder: Returns the angle specification string
License requirements: None.
angleThreshold() - Method in interface nxopen.facet.DecimateFacetBodyBuilder: Returns the value indicating maximum angle, where any facets with a larger relative angle are not reduced.
angleThreshold() - Method in interface nxopen.facet.SubdivideFacetBodyBuilder: Returns the angular tolerance to detect sharp edges to be kept.
angleThreshold() - Method in interface nxopen.features.OptimizeCurveBuilder: Returns the angle threshold
License requirements: None.
angleToggle() - Method in interface nxopen.cam.ToolChangeCiBuilder: Returns the Tool angle toggle
License requirements: None.
angleTol() - Method in interface nxopen.features.SphericalCornerBuilder: Returns the Angular Tolerance
License requirements: None.
angleTol - Variable in class nxopen.uf.UFCurve.WrapData
angleTol - Variable in class nxopen.uf.UFModl.StycornerData
angleTol - Variable in class nxopen.uf.UFModlFeatures.AskTaperFromEdgesData
angleTol - Variable in class nxopen.uf.UFSmd.FpPrefs
angletolerance - Variable in class nxopen.ApparentChainingRule.Data: Angle tolerance
angleTolerance() - Method in interface nxopen.cam.NCAssistantBuilder: Returns the Angle Tolerance
License requirements: None.
angleTolerance() - Method in interface nxopen.cam.SurfaceRegions: Returns the angle tolerance
License requirements: None.
angleTolerance() - Method in interface nxopen.cam.Topology: Returns the angle tolerance
License requirements: None.
angleTolerance - Variable in class nxopen.CurveFeatureTangentRule.Data: Angle tolerance for tangent curves
angleTolerance - Variable in class nxopen.CurveTangentRule.Data: Angle tolerance for tangent curves
angleTolerance() - Method in interface nxopen.die.AddendumSectionBuilder: Returns the angle tolerance.
angleTolerance() - Method in interface nxopen.die.CastReliefBuilder: Returns the angle tolerance
License requirements: None.
angleTolerance() - Method in interface nxopen.die.ClampingSlotBuilder: Returns the angle tolerance
License requirements: None.
angleTolerance() - Method in interface nxopen.die.ClearanceBuilder: Returns the angle tolerance.
angleTolerance() - Method in interface nxopen.die.CompensateRoughDataBuilder: Returns the angle tolerance.
angleTolerance() - Method in interface nxopen.die.DieShoeBuilder: Returns the angle tolerance
License requirements: None.
angleTolerance() - Method in interface nxopen.die.DrawBeadBuilder: Returns the angle tolerance.
angleTolerance() - Method in interface nxopen.die.DrawDiePunchBuilder: Returns the angle tolerance of the draw die punch casting.
angleTolerance() - Method in interface nxopen.die.FillAreaBuilder: Returns the angle tolerance.
angleTolerance() - Method in interface nxopen.die.FillBuilder: Returns the angle tolerance of the area fill
License requirements: die_engineering ("DIE ENGINEERING")
.
angleTolerance() - Method in interface nxopen.die.FingerClearanceNotchBuilder: Returns the angle tolerance.
angleTolerance() - Method in interface nxopen.die.FlangeTaskBuilder: Returns the angle tolerance of the flange task
License requirements: die_engineering ("DIE ENGINEERING")
.
angleTolerance() - Method in interface nxopen.die.FormTaskBuilder: Returns the angle tolerance of the form task.
angleTolerance() - Method in interface nxopen.die.HandlingCoreBuilder: Returns the angle tolerance.
angleTolerance() - Method in interface nxopen.die.HeelpostBuilder: Returns the angle tolerance
License requirements: None.
angleTolerance() - Method in interface nxopen.die.KeywayBuilder: Returns the angle tolerance
License requirements: None.
angleTolerance() - Method in interface nxopen.die.MachineReliefBuilder: Returns the angle tolerance.
angleTolerance() - Method in interface nxopen.die.OutputCurvesBuilder: Returns the angle tolerance.
angleTolerance() - Method in interface nxopen.die.PierceTaskBuilder: Returns the angle tolerance of the pierce task
License requirements: die_engineering ("DIE ENGINEERING")
.
angleTolerance() - Method in interface nxopen.die.RotorBuilder: Returns the angle tolerance of the rotor casting.
angleTolerance() - Method in interface nxopen.die.SpringbackCompensationBuilder: Returns the angle tolerance.
angleTolerance() - Method in interface nxopen.die.SteelInsertBuilder: Returns the angle tolerance of the diesteelinsert
License requirements: ug_die_design ("Die Design")
.
angleTolerance() - Method in interface nxopen.die.TrimTaskBuilder: Returns the angle tolerance of the trim task
License requirements: die_engineering ("DIE ENGINEERING")
.
angleTolerance() - Method in interface nxopen.drawings.ViewStyleShadingBuilder: Returns the angle tolerance data on the SHADING tab of the View Style Dialog
License requirements: None.
angleTolerance - Variable in class nxopen.EdgeMultipleSeedTangentRule.Data: Angle tolerance for tangent edges
angleTolerance - Variable in class nxopen.EdgeTangentRule.Data: Angle tolerance for tangent edges
angleTolerance - Variable in class nxopen.EdgeVertexTangentRule.Data: Angle tolerance for tangent edges
angleTolerance() - Method in interface nxopen.facet.MergeFacetBodyBuilder: Returns the angle tolerance used in the merge facet body feature
License requirements: None.
angleTolerance - Variable in class nxopen.FaceTangentRule.Data: Angle tolerance for tangent faces
angleTolerance() - Method in interface nxopen.features.BlendCornerBuilder: Returns the angle tolerance.
angleTolerance() - Method in interface nxopen.features.ConcaveFacesBuilder: Returns the angle tolerance.
angleTolerance() - Method in interface nxopen.features.CurveOnSurfaceBuilder: Returns the angle tolerance
License requirements: solid_modeling ("SOLIDS MODELING")
.
angleTolerance() - Method in interface nxopen.features.DraftBuilder: Returns the angle tolerance in [rad/deg]
License requirements: solid_modeling ("SOLIDS MODELING")
.
angleTolerance() - Method in interface nxopen.features.ExtractFaceBuilder: Returns the angle Tolerance
License requirements: None.
angleTolerance() - Method in interface nxopen.features.GlobalShapingBuilder: Returns the angle tolerance
License requirements: None.
angleTolerance() - Method in interface nxopen.features.GuidedExtensionBuilderEx: Returns the angle tolerance for use in creating the guided extension surfaces
License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_2 ("advanced freeform modeling") OR ug_mold_design ("UG MOLD") OR die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
angleTolerance() - Method in interface nxopen.features.HelixBuilder: Returns the angle tolerance
License requirements: None.
angleTolerance() - Method in interface nxopen.features.JoinCurvesBuilder: Returns the angle tolerance.
angleTolerance() - Method in interface nxopen.features.LawExtensionBuilder: Returns the angle tolerance
License requirements: solid_modeling ("SOLIDS MODELING") OR free_form_modeling ("FREE-FORM MODELING")
.
angleTolerance() - Method in interface nxopen.features.LawExtensionBuilderEx: Returns the angle tolerance
License requirements: None.
angleTolerance() - Method in interface nxopen.features.OffsetEmbossBuilder: Returns the angle tolerance: The maximum allowable angle between the true theoretical sheet and the body created to approximate it.
angleTolerance() - Method in interface nxopen.features.PointSetBuilder: Returns the angle tolerance.
angleTolerance() - Method in interface nxopen.features.RibbonBuilder: Returns the angle tolerance
License requirements: None.
angleTolerance() - Method in interface nxopen.features.shipdesign.FeatureParmsBuilder: Returns the tolerance, in degrees, used to determine when angles are zero.
angleTolerance() - Method in interface nxopen.features.shipdesign.MarkingLineBuilder: Returns the angle tolerance for marking lines.
angleTolerance() - Method in interface nxopen.features.shipdesign.MarkingLineDesignBuilder: Returns the angle tolerance for marking lines.
angleTolerance() - Method in interface nxopen.features.shipdesign.OrientationDefinitionBuilder: Returns the angle tolerance used in the orientation objects to determine if vectors are parallel.
angleTolerance() - Method in interface nxopen.features.shipdesign.PillarBuilder: Returns the angle tolerance.
angleTolerance() - Method in interface nxopen.features.shipdesign.RollingLineBuilder: Returns the modeling angle tolerance.
angleTolerance() - Method in interface nxopen.features.shipdesign.ShellTemplateBuilder: Returns the modeling angle tolerance.
angleTolerance() - Method in interface nxopen.features.shipdesign.ShipPreparationBuilder: Returns the angle tolerance.
angleTolerance() - Method in interface nxopen.features.WrapBuilder: Returns the angle tolerance used to determine the sampling of the curve during processing, and the accuracy of the output.
angleTolerance - Variable in class nxopen.FollowFilletRule.Data: Angle tolerance
angleTolerance() - Method in interface nxopen.geometricanalysis.DeviationChecking: Returns the angle tolerance to be used for the deviation checking
License requirements: None.
angleTolerance() - Method in interface nxopen.geometricutilities.CurveFitData: Returns the angle tolerance
License requirements: None.
angleTolerance() - Method in interface nxopen.geometricutilities.DisplayResolutionBuilder: Returns the angle tolerance
License requirements: None.
angleTolerance() - Method in interface nxopen.geometricutilities.MatchSurfaceBuilder: Returns the angle tolerance
License requirements: None.
angleTolerance - Variable in class nxopen.preferences.PartVisualizationShade.AdvVisViewFacetTolerancesData
angleTolerance - Variable in class nxopen.preferences.PartVisualizationShade.ShadedViewFacetTolerancesData
angleTolerance() - Method in interface nxopen.routing.ElbowSnapSettings: Returns the tolerance within which to search for elbow angles.
angleTolerance() - Method in interface nxopen.Section: Returns the angle tolerance
License requirements: gateway ("UG GATEWAY")
.
angleTolerance() - Method in interface nxopen.SketchAutoConstrainBuilder: Returns the angle tolerance
License requirements: None.
angleTolerance() - Method in interface nxopen.SketchIntersectionCurveBuilder: Returns the angular tolerance
License requirements: None.
angleTolerance() - Method in interface nxopen.tooling.GuidedExtensionBuilder: Returns the angle tolerance for use in creating the guided extension surfaces
License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_2 ("advanced freeform modeling") OR ug_mold_design ("UG MOLD") OR die_engineering ("DIE ENGINEERING")
.
angleTolerance - Variable in class nxopen.uf.UFModlFeatures.AskTaperFromEdges1Data
angleToleranceData() - Method in interface nxopen.preferences.PartModeling: Returns the angle tolerance data.
angleToleranceEdges() - Method in interface nxopen.cam.GeometrySet: Returns the angle tolerance
License requirements: None.
angleToleranceValue() - Method in interface nxopen.tooling.FormingInsertBuilder: Returns the tangent edge angle tolerance value of forming region.
angleToProjectionVector() - Method in interface nxopen.features.ProjectCurveBuilder: Returns the angle to projection vector
License requirements: None.
angleType() - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder: Returns the angle setting
License requirements: None.
angleType() - Method in interface nxopen.cam.BoundaryTurnMemberCorner: Returns the corner angle type
License requirements: None.
angleType() - Method in interface nxopen.cam.ProbeInspectBorebossMoveBuilder: Returns the angle type
License requirements: None.
angleType - Variable in class nxopen.uf.UFModl.FlangeData
angleType - Variable in class nxopen.uf.UFModl.SmbendData
angleType - Variable in class nxopen.uf.UFSmd.GenPrefs
angleUnit - Variable in class nxopen.cae.Result.ResultBasicUnit
angleValue() - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder: Returns the angle value
License requirements: None.
angleValue() - Method in interface nxopen.cam.BoundaryTurnMemberFineFinishCorner: Returns the fine_finish_corner angle value
License requirements: None.
angleValue() - Method in interface nxopen.cam.InspectionOperationTransformBuilder: Returns the angle value
License requirements: None.
angleValue() - Method in interface nxopen.cam.OperationTransformBuilder: Returns the angle value
License requirements: None.
angleValue() - Method in interface nxopen.drawings.ViewStyleGeneralBuilder: Returns the angle value on the GENERAL tab of the View Style Dialog
License requirements: None.
angleValue() - Method in interface nxopen.features.FitSurfaceBuilder: Returns the angle is fixed to a specific value
License requirements: None.
angTol - Variable in class nxopen.uf.UFCurve.OcfData
ANGULAR - Static variable in class nxopen.annotations.DimensionMeasurementBuilder.MeasurementMethod: Angular measurement type
ANGULAR - Static variable in class nxopen.annotations.GeometricCharacteristic: Specifies angular characteristics
ANGULAR - Static variable in class nxopen.annotations.SearchCriteriaDimensionBuilder.DimensionTypes: Angular
ANGULAR - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.ParamTolZoneShape: Angular
ANGULAR - Static variable in class nxopen.cam.NcmWedmBuilder.LeadInMethodTypes: angular lead in
ANGULAR - Static variable in class nxopen.cam.NcmWedmBuilder.LeadOutMethodTypes: angular lead out
angular() - Method in interface nxopen.cam.StepoverBuilder: Returns the angular
License requirements: None.
ANGULAR - Static variable in class nxopen.cam.StepoverBuilder.StepoverTypes: Angular
angular() - Method in interface nxopen.ListCreator: Returns the m_angular * - Specifies the angular tolerance for Defined Level of Detail
License requirements: None.
ANGULAR - Static variable in class nxopen.mechatronics.CamBuilder.AxisJointType: Angular
ANGULAR - Static variable in class nxopen.mechatronics.GearBuilder.AxisJointType: Angular
ANGULAR - Static variable in class nxopen.mechatronics.PositionControlBuilder.Axis: angular
ANGULAR - Static variable in class nxopen.mechatronics.SpeedControlBuilder.AxisJointType: Angular
ANGULAR - Static variable in class nxopen.mechatronics.SpringDamperBuilder.AxisJointType: Angular
ANGULAR - Static variable in class nxopen.mechatronics.VirtualAxisBuilder.VirtualAxisType
ANGULAR - Static variable in class nxopen.PositioningDimension.Subtype: Angular dimension
ANGULAR_ACCELERATION - Static variable in class nxopen.cae.Result.Quantity
ANGULAR_ACCELERATION - Static variable in class nxopen.cae.XyFunctionMeasure: Angular acceleration unit
ANGULAR_ACCELERATION_DEGREE - Static variable in class nxopen.cae.XyFunctionUnit: Angular acceleration unit: degree/sec ^2
ANGULAR_ACCELERATION_LEVEL_CROSSING_RATE - Static variable in class nxopen.cae.Result.Quantity
ANGULAR_ACCELERATION_RADIAN - Static variable in class nxopen.cae.XyFunctionUnit: Angular acceleration unit: radian/sec ^2
ANGULAR_BLANKING - Static variable in class nxopen.tooling.ForceCalculationBuilder.ProcessTypes: angular blanking
ANGULAR_DIM - Static variable in class nxopen.Sketch.ConstraintType: system will decide if it is major or minor
ANGULAR_DIM - Static variable in class nxopen.uf.UFSket.ConType
ANGULAR_DIRECTED_DIMENSION - Static variable in class nxopen.uf.UFGdt.DirectedDimensionType
ANGULAR_DISPLACEMENT - Static variable in class nxopen.cae.XyFunctionMeasure: Angular displacement unit
ANGULAR_DISPLACEMENT_DEGREE - Static variable in class nxopen.cae.XyFunctionUnit: Angular displacement unit: degree
ANGULAR_DISPLACEMENT_RADIAN - Static variable in class nxopen.cae.XyFunctionUnit: Angular displacement unit: radian
ANGULAR_EMBOSSING - Static variable in class nxopen.tooling.ForceCalculationBuilder.ProcessTypes: angular embossing
ANGULAR_LINE - Static variable in class nxopen.cam.BoundaryTurnMemberFineFinishCorner.ValueType
ANGULAR_MAGNITUDE - Static variable in class nxopen.motion.MotionSensorBuilder.Component: angular magnitude component
ANGULAR_MAJOR - Static variable in class nxopen.annotations.DimensionType: Major Angular dimension
ANGULAR_MAJOR_SIZE - Static variable in class nxopen.uf.UFGdt.SizeValueType
ANGULAR_MINOR - Static variable in class nxopen.annotations.DimensionType: Minor Angular dimension
ANGULAR_MINOR_SIZE - Static variable in class nxopen.uf.UFGdt.SizeValueType
ANGULAR_PIERCING - Static variable in class nxopen.tooling.ForceCalculationBuilder.ProcessTypes: angular piercing
ANGULAR_TYPE - Static variable in class nxopen.uf.UFGdt.Characteristic
ANGULAR_VELOCITY - Static variable in class nxopen.cae.Result.Quantity
ANGULAR_VELOCITY - Static variable in class nxopen.cae.XyFunctionMeasure: Angular velocity unit
ANGULAR_VELOCITY_DEGREE - Static variable in class nxopen.cae.XyFunctionUnit: Angular velocity unit: degree/sec
ANGULAR_VELOCITY_LEVEL_CROSSING_RATE - Static variable in class nxopen.cae.Result.Quantity
ANGULAR_VELOCITY_RADIAN - Static variable in class nxopen.cae.XyFunctionUnit: Angular velocity unit: radian/sec
angularAccuracy() - Method in interface nxopen.tooling.CalculateAreaBuilder: Returns the angular accuracy used as the minimum angle between two reference planes.
angularAxis() - Method in interface nxopen.geometricutilities.ModlMotion: Returns the angular axis of ModlMotion.Options.ANGLE motion option.
angularDampingExpression() - Method in interface nxopen.mechatronics.PreferencesBuilder: Returns the angular damping expression
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
angularDelta() - Method in interface nxopen.geometricutilities.PatternClocking: Deprecated.
Deprecated in NX8.0.0. This functionality is no longer supported.
angularDelta() - Method in interface nxopen.geometricutilities.PatternClockingBuilder: Returns the angular delta for circular clocking
License requirements: None.
AngularDim - Interface in nxopen.features: Represents a angular dimension feature
To create or edit an instance of this class, use AngularDimBuilder

Created in NX6.0.0
angularDim() - Method in interface nxopen.features.shipdesign.PillarBuilder: Returns the angle that the pillar stock will be rotated about its path from its initial location.
angularDim() - Method in interface nxopen.features.shipdesign.ShipCutoutBuilder: Returns the angular dimension used to rotate the cutout's profile The angular dimension is only used for the Face2Lines placement method.
angularDim() - Method in interface nxopen.features.shipdesign.SteelVentHolesBuilder: Returns the angular dimension used to rotate the profile of the vent holes
License requirements: None.
AngularDimBuilder - Interface in nxopen.features: Represents a AngularDim builder
To create a new instance of this class, use FeatureCollection.createAngularDimensionBuilder(nxopen.features.AngularDim)

Created in NX6.0.0
AngularDimension - Interface in nxopen.annotations: Represents an angular dimension
Abstract class
.
AngularDimension - Interface in nxopen.blockstyler: Represents a Angular Dimension block .
angularDimension() - Method in interface nxopen.features.shipdesign.Cutout2Builder: Returns the angular dimension (used only for Face2Lines, Faces2Surfaces, FacesBetweenSurfacesSurface, FacesCentered)
License requirements: None.
angularDimension() - Method in interface nxopen.features.shipdesign.PlateChamferBuilder: Returns the angular dimension
License requirements: None.
angularDimension() - Method in interface nxopen.tooling.SlugRetentionBuilder: Returns the angular dimension
License requirements: None.
AngularDimensionBuilder - Interface in nxopen.annotations: Represents a AngularDimension builder
This is an abstract class and cannot be instantiated.
AngularDimensionFormat - Class in nxopen.annotations: Specifies the angular dimension format
angularDimensionFormat() - Method in interface nxopen.annotations.UnitsFormatPreferences: Returns the angular dimension format
License requirements: None.
angularDimensionValueDp - Variable in class nxopen.uf.UFDrf.DimensionPreferences
angularDimensionValueDp - Variable in class nxopen.uf.UFDrf.DimensionPreferences1
angularDimensionValuePrecision() - Method in interface nxopen.annotations.DimensionStyleBuilder: Returns the angular dimension value precision
License requirements: None.
angularDimOffset() - Method in interface nxopen.features.shipdesign.VentilationHoles2Builder: Returns the angular dim offset
License requirements: None.
angularDirection() - Method in interface nxopen.geometricutilities.ModlDistanceAngle: Returns the direction of angular dimensions.
angularExp() - Method in interface nxopen.cae.CorrelFineTuneAlignmentBuilder: Returns the angular expression
License requirements: None.
angularFrequency - Variable in class nxopen.mechatronics.CamProfileBuilder.Element: segment polynomial coefficient
angularGridSize - Variable in class nxopen.preferences.WorkPlane.PolarGridSize: Angular grid line parameters
ANGULARITY - Static variable in class nxopen.annotations.FeatureControlFrameBuilder.FcfCharacteristic: angularity
ANGULARITY - Static variable in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.CharacteristicOptions: angularity
ANGULARITY - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.TolType: Angularity
angularLaw() - Method in interface nxopen.geometricutilities.OrientationMethodBuilder: Returns the angular law.
AngularLimitJoint - Interface in nxopen.mechatronics: Represents the Angular Limit Joint.
AngularLimitJointBuilder - Interface in nxopen.mechatronics: Represents a AngularLimitJoint builder.
AngularLimitJointCollection - Interface in nxopen.mechatronics: Represents a collection of Angular Limit Joint.
angularLimitJoints() - Method in interface nxopen.mechatronics.PhysicsManager: Returns the AngularLimitJointCollection belonging to this part
Created in NX7.5.1
AngularLimits - Interface in nxopen.geometricutilities: Represents a angular limts data.
angularLowerLimit() - Method in interface nxopen.mechatronics.CylindricalJointBuilder: Returns the angular lower limit.
angularMag - Variable in class nxopen.uf.UFMotion.LinkInitialVel
angularPath() - Method in interface nxopen.mechatronics.PositionControlBuilder: Returns the angular path.
AngularPatternSpacing - Interface in nxopen.geometricutilities: defines the various ways pattern instances can be spaced within the pattern, particularly in the context of the PatternDefinition class.
AngularPatternSpacing.UsePitchOptions - Class in nxopen.geometricutilities: This defines Use Pitch As options
angularPlaces() - Method in interface nxopen.cam.InspectionCmmCommandBuilder: Returns the angular decimal places
License requirements: None.
angularSpacing() - Method in interface nxopen.geometricutilities.CircularPattern: Returns the angular spacing of the instances of the pattern
License requirements: None.
AngularSpringJoint - Interface in nxopen.mechatronics: Represents the Angular Spring Joint.
AngularSpringJointBuilder - Interface in nxopen.mechatronics: Represents a AngularSpringJoint builder.
AngularSpringJointCollection - Interface in nxopen.mechatronics: Represents a collection of Angular Spring Joint.
angularSpringJoints() - Method in interface nxopen.mechatronics.PhysicsManager: Returns the AngularSpringJointCollection belonging to this part
Created in NX7.5.1
AngularSuppressZeros - Class in nxopen.annotations: Specifies the suppress zeros option for the angular dimension
angularSuppressZeros() - Method in interface nxopen.annotations.UnitsStyleBuilder: Returns the angular suppress zeros option
License requirements: None.
angularSuppressZeros - Variable in class nxopen.uf.UFDrf.UnitsFormatPreferences
AngularTolerance - Interface in nxopen.annotations: Represents angular tolerance .
angularTolerance() - Method in interface nxopen.blockstyler.SectionBuilder: Returns the AngularTolerance
License requirements: None.
angularTolerance() - Method in interface nxopen.blockstyler.SuperSection: Returns the AngularTolerance
License requirements: None.
angularTolerance() - Method in interface nxopen.features.AOCSBuilder: Returns the angular tolerance for the AOCS operation.
angularTolerance() - Method in interface nxopen.features.ExtrudeBuilder: Returns the angle tolerance
License requirements: None.
angularTolerance() - Method in interface nxopen.features.OvercrownBuilder: Returns the angular tolerance
License requirements: solid_modeling ("SOLIDS MODELING")
.
angularTolerance() - Method in interface nxopen.features.sheetmetal.MetaformBuilder: Returns the angular tolerance
License requirements: None.
angularTolerance() - Method in interface nxopen.features.shipdesign.MirrorShipStructureBuilder: Returns the angular tolerance used for geometry comparison and defined in the customer defaults.
angularTolerance() - Method in interface nxopen.features.shipdesign.ProfileBuilder: Returns the angular tolerance (degrees).
angularTolerance() - Method in interface nxopen.features.shipdesign.ProfileCutoutBuilder: Returns the angular tolerance (degrees).
angularTolerance() - Method in interface nxopen.features.shipdesign.ProfileTransitionBuilder: Returns the angular tolerance (degrees)
License requirements: None.
angularTolerance() - Method in interface nxopen.features.shipdesign.SplitStandardPartBuilder: Returns the tolerance, in degrees, used to determine when angles are zero.
angularTolerance() - Method in interface nxopen.features.shipdesign.StiffenerBuilder: Returns the angular tolerance (degrees)
License requirements: None.
angularTolerance() - Method in interface nxopen.features.VarsweepBuilder: Returns the angle tolerance [degrees]
License requirements: None.
angularTolerance() - Method in interface nxopen.preferences.SessionNXGateway: Returns the angular tolerance.
angularTolerance() - Method in interface nxopen.SketchEvaluator: Returns the angle tolerance [degrees]
License requirements: None.
angularTolerance() - Method in interface nxopen.STLImporter: Returns the angular tolerance.
angularTolerance - Variable in class nxopen.uf.UFStd.StlParams
angularTolerance - Variable in class nxopen.uf.UFStd.VrmlParams
angularTolerance() - Method in interface nxopen.VRMLImporter: Returns the angular tolerance.
angularToleranceFormat() - Method in interface nxopen.annotations.UnitsFormatPreferences: Returns the angular tolerance format
License requirements: None.
angularToleranceValueDp - Variable in class nxopen.uf.UFDrf.DimensionPreferences
angularToleranceValueDp - Variable in class nxopen.uf.UFDrf.DimensionPreferences1
angularToleranceValuePrecision() - Method in interface nxopen.annotations.DimensionStyleBuilder: Returns the angular tolerance value precision
License requirements: None.
angularUnits() - Method in interface nxopen.cam.InspectionCmmCommandBuilder: Returns the angular units
License requirements: None.
angularUpperLimit() - Method in interface nxopen.mechatronics.CylindricalJointBuilder: Returns the angular upper limit.
angularVelocityDirection() - Method in interface nxopen.mechatronics.RigidBodyBuilder: Returns the angular velocity direction.
angularVelocityMagnitude() - Method in interface nxopen.mechatronics.RigidBodyBuilder: Returns the angular velocity magnitude.
animateCreateAnimation(int) - Method in interface nxopen.uf.UFSfPost: Refer to UF_SF_POST_animate_create_animation for documentation.
animateDeleteAnimation(int) - Method in interface nxopen.uf.UFSfPost: Refer to UF_SF_POST_animate_delete_animation for documentation.
animateSetAnimCurFrame(int, int) - Method in interface nxopen.uf.UFSfPost: Refer to UF_SF_POST_animate_set_anim_cur_frame for documentation.
animateSetAnimCurIter(int, int) - Method in interface nxopen.uf.UFSfPost: Refer to UF_SF_POST_animate_set_anim_cur_iter for documentation.
animateSetAnimIter(int, boolean) - Method in interface nxopen.uf.UFSfPost: Refer to UF_SF_POST_animate_set_anim_iter for documentation.
animateSetAnimIters(int, int, int) - Method in interface nxopen.uf.UFSfPost: Refer to UF_SF_POST_animate_set_anim_iters for documentation.
animateSetAnimNumFrames(int, int) - Method in interface nxopen.uf.UFSfPost: Refer to UF_SF_POST_animate_set_anim_num_frames for documentation.
animateSetAnimType(int, int) - Method in interface nxopen.uf.UFSfPost: Refer to UF_SF_POST_animate_set_anim_type for documentation.
animateStepAnimationFrame(int, boolean) - Method in interface nxopen.uf.UFSfPost: Refer to