- U - Static variable in class nxopen.cam.InspectionMethodBuilder.PointSequenceDirectionTypes
-
Order by U
- U - Static variable in class nxopen.cam.TurnToolBuilder.HolderStyles
-
U-Style
- U - Static variable in class nxopen.features.StudioXformBuilder.PlanarizeDirectionType
-
Deprecated.
U direction when planarize
- U - Static variable in class nxopen.features.StudioXformBuilderEx.PlanarizeDirectionType
-
U direction when planarize
- U - Static variable in class nxopen.features.StudioXformBuilderEx.SurfaceDirectionType
-
U direction of a B-Surface
- U - Static variable in class nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder.CurvatureTypes
-
U
- U - Static variable in class nxopen.geometricutilities.BlendSetbackBuilder.Directions
-
setback curve is an iso-u parameter curve
- U - Static variable in class nxopen.geometricutilities.RefitControlBuilder.RefitControlDirection
-
u
- U - Static variable in class nxopen.geometricutilities.SelectDividingObjectBuilder.IsoparametricDirectionType
-
- U - Static variable in class nxopen.Offset.OnFaceOption
-
Creates offset representing curvature in U parameter direction on face.
- u1 - Variable in class nxopen.uf.UFModeling.AskFacePropsData
-
- u2 - Variable in class nxopen.uf.UFModeling.AskFacePropsData
-
- ubDecimalFormat - Variable in class nxopen.uf.UFGdt.UnitBasis
-
- UBEND - Static variable in class nxopen.routing.CornerTypeBuilder.Type
-
- UBENDING - Static variable in class nxopen.tooling.ForceCalculationBuilder.ProcessTypes
-
U bending
- ubendSelection() - Method in interface nxopen.routing.AssignCornerBuilder
-
Returns the routing object collector for ubend
License requirements: routing_base ("Routing Basic")
.
- UBUTT - Static variable in class nxopen.annotations.LineWeldDataBuilder.WeldSymbolType
-
- UBUTT - Static variable in class nxopen.annotations.Symbol
-
Specifies U butt weld symbol
- ucount() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns the number of points in U direction
License requirements: None.
- uCount - Variable in class nxopen.uf.UFModeling.AskFaceGridCountData
-
- UCUTOUT - Static variable in class nxopen.features.sheetmetal.ClosedCornerBuilder.TreatmentTypeOptions
-
U shaped relief
- UCUTOUT - Static variable in class nxopen.features.sheetmetal.MiterOptions.ClosedCornerTypeOptions
-
corner has a U shaped cutout in it
- UCUTOUT - Static variable in class nxopen.features.sheetmetal.ThreeBendCornerBuilder.TreatmentTypeOptions
-
- UD - Static variable in class nxopen.cam.TurnToolBuilder.HolderStyles
-
User-Defined-Style
- UD_SYMBOL_DRAW - Static variable in class nxopen.uf.UFDrf.UdSymbolPenType
-
- UD_SYMBOL_MOVE - Static variable in class nxopen.uf.UFDrf.UdSymbolPenType
-
- Ude - Interface in nxopen.cam
-
Represets a User Defined Event
To create a new instance of this class, use
UdeSet.createUde()
Created in NX7.0.0
- ude - Variable in class nxopen.uf.UFCambndWedm.AppendItemUdeData
-
- ude() - Method in interface nxopen.UFSession
-
- UDE_END_SET - Static variable in class nxopen.uf.UFCambnd.UdeSetType
-
- UDE_START_SET - Static variable in class nxopen.uf.UFCambnd.UdeSetType
-
- UDE_UNDEFINED - Static variable in class nxopen.uf.UFCambnd.UdeSetType
-
- udeEndOfPath() - Method in interface nxopen.cam.ToolPathDivideBuilder
-
Returns the End of Path command
License requirements: None.
- UDEF - Static variable in class nxopen.tooling.ReliefDesignBuilder.Method
-
User Defined method
- uDegIntData - Variable in class nxopen.uf.UFModl.RefitFaceData
-
- udegree() - Method in interface nxopen.features.SectionSurfaceBuilder
-
- udegree() - Method in interface nxopen.features.SectionSurfaceBuilderEx
-
Returns the u degree.
- udegree() - Method in interface nxopen.geometricutilities.DegreesAndSegmentsOrPatchesBuilder
-
Returns the u degree
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- UdeList - Interface in nxopen.cam
-
Represents a list of objects.
- udeList() - Method in interface nxopen.cam.UdeSet
-
Returns the Ude List
License requirements: cam_base ("CAM BASE")
.
- UdeMoveBuilder - Interface in nxopen.cam
-
- udeName() - Method in interface nxopen.cam.Ude
-
Returns the ude name
License requirements: None.
- udeObjs - Variable in class nxopen.uf.UFParam.AskUdesData
-
- UdeParameter - Interface in nxopen.cam
-
Represents a User Defined Event Parameter .
- uDerivative - Variable in class nxopen.geometricanalysis.GeometricProperties.CaeFace
-
Derivative in U, Root Part Coordinates
- uDerivative - Variable in class nxopen.geometricanalysis.GeometricProperties.Face
-
Derivative Vector in U direction - Root Part Coordinates
- uDerivativeInWcs - Variable in class nxopen.geometricanalysis.GeometricProperties.CaeFace
-
Derivative in U in Work Part Coordinates
- uDerivativeInWcs - Variable in class nxopen.geometricanalysis.GeometricProperties.Face
-
Derivative Vector in U direction - Work Part Coordinates
- udeset() - Method in interface nxopen.cam.InPathEventDataBuilder
-
Returns the Inpath Events Set
License requirements: cam_base ("CAM BASE")
.
- udeSet() - Method in interface nxopen.cam.InPathEventSetData
-
Returns the ude set
License requirements: None.
- udeSet() - Method in interface nxopen.cam.LaserControlPoint
-
Returns the Machine Control Events
License requirements: None.
- udeSet() - Method in interface nxopen.cam.LatheMachineControlBuilder
-
Returns the ude set
License requirements: None.
- udeSet() - Method in interface nxopen.cam.MillMachineControlBuilder
-
Returns the ude set
License requirements: None.
- udeSet() - Method in interface nxopen.cam.ObjectsUdeSet
-
Returns the ude set
License requirements: cam_base ("CAM BASE")
.
- udeSet() - Method in interface nxopen.cam.PostEventsCiBuilder
-
Returns the UdeSet
License requirements: cam_base ("CAM BASE")
.
- udeSet() - Method in interface nxopen.cam.UdeMoveBuilder
-
Returns the UdeSet
License requirements: cam_base ("CAM BASE")
.
- UdeSet - Interface in nxopen.cam
-
Represets a set of User Defined Events .
- udeSet() - Method in interface nxopen.cam.WedmMachineControlBuilder
-
Returns the ude set
License requirements: None.
- udesetBuilder() - Method in interface nxopen.cam.InPathEventDataBuilder
-
Returns the UDE Set Builder
License requirements: cam_base ("CAM BASE")
.
- udeSetStatus() - Method in interface nxopen.cam.InPathEventSetData
-
Returns the ude set status
License requirements: None.
- udeStartOfPath() - Method in interface nxopen.cam.ToolPathDivideBuilder
-
Returns the Start of Path command
License requirements: None.
- UDF_KEEP_DIR - Static variable in class nxopen.uf.UFModl.UdfReverseDir
-
- UDF_REVERSE_DIR - Static variable in class nxopen.uf.UFModl.UdfReverseDir
-
- UdfExpData() - Constructor for class nxopen.uf.UFModl.UdfExpData
-
- UdfExpData(int, Tag[], String[]) - Constructor for class nxopen.uf.UFModl.UdfExpData
-
- udfInitExpData(UFModl.UdfExpData) - Method in interface nxopen.uf.UFModlGeneral
-
- udfName - Variable in class nxopen.uf.UFModlGeneral.AskUdfParmsData
-
- udfPrompt - Variable in class nxopen.uf.UFModlGeneral.AskUdfParmsData
-
- udfRpoMenu(Tag) - Method in interface nxopen.uf.UFModlUi
-
- udfsAskDefData(Tag) - Method in interface nxopen.uf.UFModlGeneral
-
- udfsCreateDef(Tag, UFModl.UdfsDefData) - Method in interface nxopen.uf.UFModlGeneral
-
- udfsData - Variable in class nxopen.uf.UFAssem.DeformData
-
- UdfsDefData() - Constructor for class nxopen.uf.UFModl.UdfsDefData
-
- UdfsDefData(Tag[], int, UFModl.UdfsExp[], int, Tag[], String[], int, String, boolean) - Constructor for class nxopen.uf.UFModl.UdfsDefData
-
- UdfsExp() - Constructor for class nxopen.uf.UFModl.UdfsExp
-
- UdfsExp(int, String, String, String[], int, String, String, int) - Constructor for class nxopen.uf.UFModl.UdfsExp
-
- udfsRedefineDef(Tag, UFModl.UdfsDefData) - Method in interface nxopen.uf.UFModlGeneral
-
- udfValues - Variable in class nxopen.uf.UFModlGeneral.AskUdfParmsData
-
- UDIRECTION - Static variable in class nxopen.features.StudioXformBuilder.InsertKnotDirectionType
-
Deprecated.
Inser knot in U direction
- UDIRECTION - Static variable in class nxopen.features.StudioXformBuilderEx.InsertKnotDirectionType
-
Insert knot in U direction
- udop() - Method in interface nxopen.UFSession
-
- UdsSize() - Constructor for class nxopen.uf.UFDrf.UdsSize
-
- UdsSize(UFDrf.UdsSizeType, double, double) - Constructor for class nxopen.uf.UFDrf.UdsSize
-
- udsSizeType - Variable in class nxopen.uf.UFDrf.UdsSize
-
- UdSymbolFontInfo() - Constructor for class nxopen.uf.UFDrf.UdSymbolFontInfo
-
- UdSymbolFontInfo(int, int, double, double, double, int, UFDrf.StrokeInfo[]) - Constructor for class nxopen.uf.UFDrf.UdSymbolFontInfo
-
- UdtSectionBuilder - Interface in nxopen.cam
-
Represents a UdtSection Builder .
- UdtSectionBuilder.Data - Class in nxopen.cam
-
- UELBOW - Static variable in class nxopen.routing.CornerTypeBuilder.Type
-
- uend() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns the U end parameter
License requirements: None.
- uend() - Method in interface nxopen.geometricutilities.SurfaceRangeBuilder
-
Returns the u end
License requirements: None.
- uend - Variable in class nxopen.uf.UFCurve.AnalysisDisplay
-
- uendDeg() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns the U end degrees
License requirements: None.
- uendDist() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns the U end distance
License requirements: None.
- uendDistance() - Method in interface nxopen.geometricutilities.LocalUntrimBuilder
-
Returns the U end distance.
- uendLimit() - Method in interface nxopen.geometricutilities.LocalUntrimBuilder
-
Returns the region limit of U end.
- uendMode() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns the end U mode
License requirements: None.
- uendSweep() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns the U sweep degrees
License requirements: None.
- UF - Interface in nxopen.uf
-
Contains wrappers for all 'UF' functions and data types.
- UF() - Method in interface nxopen.UFSession
-
- UF.CallbackReason - Class in nxopen.uf
-
- UF.Codeset - Class in nxopen.uf
-
- UF.FindAllSubdirectoriesData - Class in nxopen.uf
-
- UF.GetReservedLicensesData - Class in nxopen.uf
-
- UF.List - Class in nxopen.uf
-
- UF.SystemInfo - Class in nxopen.uf
-
- UF.TimerValues - Class in nxopen.uf
-
- UF_aligned_section_line_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_all_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_analysis_type - Static variable in class nxopen.uf.UFConstants
-
- UF_angle_constraint_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_angular_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_anim_traj_type - Static variable in class nxopen.uf.UFConstants
-
- UF_annotation_type - Static variable in class nxopen.uf.UFConstants
-
- UF_APP_AEROSM - Static variable in class nxopen.uf.UFConstants
-
- UF_APP_BUILDER - Static variable in class nxopen.uf.UFConstants
-
- UF_APP_CAM - Static variable in class nxopen.uf.UFConstants
-
- UF_APP_CONDUIT - Static variable in class nxopen.uf.UFConstants
-
- UF_APP_DESFEM - Static variable in class nxopen.uf.UFConstants
-
- UF_APP_DRAFTING - Static variable in class nxopen.uf.UFConstants
-
- UF_APP_FLAT - Static variable in class nxopen.uf.UFConstants
-
- UF_APP_FLEX_PCB - Static variable in class nxopen.uf.UFConstants
-
- UF_APP_GATEWAY - Static variable in class nxopen.uf.UFConstants
-
- UF_APP_HARNESS - Static variable in class nxopen.uf.UFConstants
-
- UF_APP_INSPECTION - Static variable in class nxopen.uf.UFConstants
-
- UF_APP_MECHANISMS - Static variable in class nxopen.uf.UFConstants
-
- UF_APP_MECHATRONICS - Static variable in class nxopen.uf.UFConstants
-
- UF_APP_MODELING - Static variable in class nxopen.uf.UFConstants
-
- UF_APP_MPG - Static variable in class nxopen.uf.UFConstants
-
- UF_APP_MTB - Static variable in class nxopen.uf.UFConstants
-
- UF_APP_NONE - Static variable in class nxopen.uf.UFConstants
-
- UF_APP_NOPART - Static variable in class nxopen.uf.UFConstants
-
- UF_APP_PIPE - Static variable in class nxopen.uf.UFConstants
-
- UF_APP_PUNCH - Static variable in class nxopen.uf.UFConstants
-
- UF_APP_RACEWAY - Static variable in class nxopen.uf.UFConstants
-
- UF_APP_ROUTE - Static variable in class nxopen.uf.UFConstants
-
- UF_APP_ROUTE_ELEC - Static variable in class nxopen.uf.UFConstants
-
- UF_APP_ROUTE_LGCL - Static variable in class nxopen.uf.UFConstants
-
- UF_APP_ROUTE_MECH - Static variable in class nxopen.uf.UFConstants
-
- UF_APP_SBSM - Static variable in class nxopen.uf.UFConstants
-
- UF_APP_SEQUENCING - Static variable in class nxopen.uf.UFConstants
-
- UF_APP_SFEM - Static variable in class nxopen.uf.UFConstants
-
- UF_APP_SHIP - Static variable in class nxopen.uf.UFConstants
-
- UF_APP_SHIP_BASICDESIGN - Static variable in class nxopen.uf.UFConstants
-
- UF_APP_SHIP_DETAILSDESIGN - Static variable in class nxopen.uf.UFConstants
-
- UF_APP_SHIP_MANUFACTURE - Static variable in class nxopen.uf.UFConstants
-
- UF_APP_SHOPS - Static variable in class nxopen.uf.UFConstants
-
- UF_APP_SHTFAB - Static variable in class nxopen.uf.UFConstants
-
- UF_APP_SHTNEST - Static variable in class nxopen.uf.UFConstants
-
- UF_APP_SINUCAST - Static variable in class nxopen.uf.UFConstants
-
- UF_APP_SKETCHER - Static variable in class nxopen.uf.UFConstants
-
- UF_APP_SMD - Static variable in class nxopen.uf.UFConstants
-
- UF_APP_SSL - Static variable in class nxopen.uf.UFConstants
-
- UF_APP_STEEL - Static variable in class nxopen.uf.UFConstants
-
- UF_APP_STUDIO - Static variable in class nxopen.uf.UFConstants
-
- UF_APP_STYLER - Static variable in class nxopen.uf.UFConstants
-
- UF_APP_SUBDIVISION_MODELING - Static variable in class nxopen.uf.UFConstants
-
- UF_APP_SUBSET_DEFINITION - Static variable in class nxopen.uf.UFConstants
-
- UF_APP_TRUE_STUDIO - Static variable in class nxopen.uf.UFConstants
-
- UF_APP_TUBE - Static variable in class nxopen.uf.UFConstants
-
- UF_APP_UFUN - Static variable in class nxopen.uf.UFConstants
-
- UF_APP_UGMX - Static variable in class nxopen.uf.UFConstants
-
- UF_APP_VALISYS - Static variable in class nxopen.uf.UFConstants
-
- UF_APP_WIRE - Static variable in class nxopen.uf.UFConstants
-
- UF_appended_text_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_area_attribute_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_arrow_segment_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_ask_new_tag_of_entity - Static variable in class nxopen.uf.UFConstants
-
- UF_ASSEM_add_all_levels - Static variable in class nxopen.uf.UFConstants
-
- UF_ASSEM_add_single_level - Static variable in class nxopen.uf.UFConstants
-
- UF_ASSEM_all - Static variable in class nxopen.uf.UFConstants
-
- UF_ASSEM_anim_continue - Static variable in class nxopen.uf.UFConstants
-
- UF_ASSEM_anim_stop - Static variable in class nxopen.uf.UFConstants
-
- UF_ASSEM_ASSEMBLE_SEQUENCE - Static variable in class nxopen.uf.UFConstants
-
- UF_ASSEM_ASSEMBLE_STEP - Static variable in class nxopen.uf.UFConstants
-
- UF_ASSEM_auto_generate_pfm - Static variable in class nxopen.uf.UFConstants
-
- UF_ASSEM_CAMERA_STEP - Static variable in class nxopen.uf.UFConstants
-
- UF_ASSEM_circular_array - Static variable in class nxopen.uf.UFConstants
-
- UF_ASSEM_default_load_behaviour - Static variable in class nxopen.uf.UFConstants
-
- UF_ASSEM_DISASSEMBLE_SEQUENCE - Static variable in class nxopen.uf.UFConstants
-
- UF_ASSEM_DISASSEMBLE_STEP - Static variable in class nxopen.uf.UFConstants
-
- UF_ASSEM_do_abort_on_failure - Static variable in class nxopen.uf.UFConstants
-
- UF_ASSEM_do_allow_lightweight_representations - Static variable in class nxopen.uf.UFConstants
-
- UF_ASSEM_do_allow_substitution - Static variable in class nxopen.uf.UFConstants
-
- UF_ASSEM_do_apply_to_all_levels - Static variable in class nxopen.uf.UFConstants
-
- UF_ASSEM_do_load_components - Static variable in class nxopen.uf.UFConstants
-
- UF_ASSEM_do_maintain_work_part - Static variable in class nxopen.uf.UFConstants
-
- UF_ASSEM_do_not_add_components - Static variable in class nxopen.uf.UFConstants
-
- UF_ASSEM_do_not_emphasize_wp - Static variable in class nxopen.uf.UFConstants
-
- UF_ASSEM_dont_abort_on_failure - Static variable in class nxopen.uf.UFConstants
-
- UF_ASSEM_dont_allow_lightweight_representations - Static variable in class nxopen.uf.UFConstants
-
- UF_ASSEM_dont_allow_substitution - Static variable in class nxopen.uf.UFConstants
-
- UF_ASSEM_dont_apply_to_all_levels - Static variable in class nxopen.uf.UFConstants
-
- UF_ASSEM_dont_auto_generate_pfm - Static variable in class nxopen.uf.UFConstants
-
- UF_ASSEM_dont_load_components - Static variable in class nxopen.uf.UFConstants
-
- UF_ASSEM_dont_maintain_work_part - Static variable in class nxopen.uf.UFConstants
-
- UF_ASSEM_emphasize_wp - Static variable in class nxopen.uf.UFConstants
-
- UF_ASSEM_immediate - Static variable in class nxopen.uf.UFConstants
-
- UF_ASSEM_iset_array - Static variable in class nxopen.uf.UFConstants
-
- UF_ASSEM_ISET_ARRAY - Static variable in class nxopen.uf.UFConstants
-
- UF_ASSEM_linear_array - Static variable in class nxopen.uf.UFConstants
-
- UF_ASSEM_load_as_saved - Static variable in class nxopen.uf.UFConstants
-
- UF_ASSEM_load_components_fully - Static variable in class nxopen.uf.UFConstants
-
- UF_ASSEM_load_components_partially - Static variable in class nxopen.uf.UFConstants
-
- UF_ASSEM_load_exact_version - Static variable in class nxopen.uf.UFConstants
-
- UF_ASSEM_load_from_directory - Static variable in class nxopen.uf.UFConstants
-
- UF_ASSEM_load_from_search_dirs - Static variable in class nxopen.uf.UFConstants
-
- UF_ASSEM_load_latest_version - Static variable in class nxopen.uf.UFConstants
-
- UF_ASSEM_load_wave_data - Static variable in class nxopen.uf.UFConstants
-
- UF_ASSEM_managed_load_as_saved - Static variable in class nxopen.uf.UFConstants
-
- UF_ASSEM_managed_load_by_revision_rule - Static variable in class nxopen.uf.UFConstants
-
- UF_ASSEM_max_dim_count - Static variable in class nxopen.uf.UFConstants
-
- UF_ASSEM_MC_ARRAY - Static variable in class nxopen.uf.UFConstants
-
- UF_ASSEM_MOTION_STEP - Static variable in class nxopen.uf.UFConstants
-
- UF_ASSEM_no_update_report - Static variable in class nxopen.uf.UFConstants
-
- UF_ASSEM_none - Static variable in class nxopen.uf.UFConstants
-
- UF_ASSEM_OPERATIONAL_SEQUENCE - Static variable in class nxopen.uf.UFConstants
-
- UF_ASSEM_SNAPSHOT_STEP - Static variable in class nxopen.uf.UFConstants
-
- UF_ASSEM_specify_filter - Static variable in class nxopen.uf.UFConstants
-
- UF_ASSEM_UNKNOWN_SEQUENCE_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_ASSEM_UNKNOWN_STEP_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_ASSEM_update_report - Static variable in class nxopen.uf.UFConstants
-
- UF_ASSEM_use_last_component_set - Static variable in class nxopen.uf.UFConstants
-
- UF_ASSEM_use_last_filter - Static variable in class nxopen.uf.UFConstants
-
- UF_asso_param_object_group_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_asso_param_object_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_asso_param_object_type - Static variable in class nxopen.uf.UFConstants
-
- UF_ATTR_any - Static variable in class nxopen.uf.UFConstants
-
- UF_ATTR_ANY_ATTRIBUTE - Static variable in class nxopen.uf.UFConstants
-
- UF_ATTR_bool - Static variable in class nxopen.uf.UFConstants
-
- UF_ATTR_integer - Static variable in class nxopen.uf.UFConstants
-
- UF_ATTR_LAST_ELEMENT - Static variable in class nxopen.uf.UFConstants
-
- UF_ATTR_MAX_STRING_BUFSIZE - Static variable in class nxopen.uf.UFConstants
-
- UF_ATTR_MAX_STRING_NCHARS - Static variable in class nxopen.uf.UFConstants
-
- UF_ATTR_MAX_TITLE_BUFSIZE - Static variable in class nxopen.uf.UFConstants
-
- UF_ATTR_MAX_TITLE_NCHARS - Static variable in class nxopen.uf.UFConstants
-
- UF_ATTR_NOT_ARRAY - Static variable in class nxopen.uf.UFConstants
-
- UF_ATTR_null - Static variable in class nxopen.uf.UFConstants
-
- UF_ATTR_real - Static variable in class nxopen.uf.UFConstants
-
- UF_ATTR_reference - Static variable in class nxopen.uf.UFConstants
-
- UF_ATTR_string - Static variable in class nxopen.uf.UFConstants
-
- UF_ATTR_time - Static variable in class nxopen.uf.UFConstants
-
- UF_attribute_category_type - Static variable in class nxopen.uf.UFConstants
-
- UF_attribute_container_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_attribute_password_type - Static variable in class nxopen.uf.UFConstants
-
- UF_attribute_type - Static variable in class nxopen.uf.UFConstants
-
- UF_axis_type - Static variable in class nxopen.uf.UFConstants
-
- UF_b_curve_b_spline_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_b_curve_bezier_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_b_surface_b_spline_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_b_surface_bezier_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_b_surface_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_b_surface_type - Static variable in class nxopen.uf.UFConstants
-
- UF_bend_0_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_bend_2_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_bend_segment_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_bend_table_column_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_bend_table_row_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_bend_table_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_bend_type - Static variable in class nxopen.uf.UFConstants
-
- UF_BENDTABLE_zero_columns_error - Static variable in class nxopen.uf.UFConstants
-
- UF_blade_featr_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_blended_face_type - Static variable in class nxopen.uf.UFConstants
-
- UF_BOOLEAN_CANNOT_CREATE - Static variable in class nxopen.uf.UFConstants
-
- UF_BOOLEAN_CANNOT_EDIT - Static variable in class nxopen.uf.UFConstants
-
- UF_BOOLEAN_INVALID_UNITE_BODY - Static variable in class nxopen.uf.UFConstants
-
- UF_BOUND_CLOSED - Static variable in class nxopen.uf.UFConstants
-
- UF_BOUND_CONTIGUOUS - Static variable in class nxopen.uf.UFConstants
-
- UF_BOUND_NOT_CONTIGUOUS - Static variable in class nxopen.uf.UFConstants
-
- UF_BOUND_NOT_SPECIFIED - Static variable in class nxopen.uf.UFConstants
-
- UF_BOUND_ON - Static variable in class nxopen.uf.UFConstants
-
- UF_BOUND_OPEN - Static variable in class nxopen.uf.UFConstants
-
- UF_BOUND_SPECIFIED - Static variable in class nxopen.uf.UFConstants
-
- UF_BOUND_TANGENT_TO - Static variable in class nxopen.uf.UFConstants
-
- UF_boundary_type - Static variable in class nxopen.uf.UFConstants
-
- UF_bounded_plane_loop_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_bounded_plane_loop_type - Static variable in class nxopen.uf.UFConstants
-
- UF_bounded_plane_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_bounded_plane_type - Static variable in class nxopen.uf.UFConstants
-
- UF_breakline_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_BREP_ASATTACHED_OPTION - Static variable in class nxopen.uf.UFConstants
-
- UF_BREP_BSURF_DIST_OPTION - Static variable in class nxopen.uf.UFConstants
-
- UF_BREP_BSURF_MULT_OPTION - Static variable in class nxopen.uf.UFConstants
-
- UF_BREP_CURVE_DIST_OPTION - Static variable in class nxopen.uf.UFConstants
-
- UF_BREP_CURVE_MULT_OPTION - Static variable in class nxopen.uf.UFConstants
-
- UF_BREP_EDGE3D_OPTION - Static variable in class nxopen.uf.UFConstants
-
- UF_BREP_err_already_has_geom - Static variable in class nxopen.uf.UFConstants
-
- UF_BREP_err_bad_curve_type - Static variable in class nxopen.uf.UFConstants
-
- UF_BREP_err_bad_geom_sense - Static variable in class nxopen.uf.UFConstants
-
- UF_BREP_err_bad_root_topology_type - Static variable in class nxopen.uf.UFConstants
-
- UF_BREP_err_bad_surf_type - Static variable in class nxopen.uf.UFConstants
-
- UF_BREP_err_bad_ug_entity - Static variable in class nxopen.uf.UFConstants
-
- UF_BREP_err_bad_ug_tag - Static variable in class nxopen.uf.UFConstants
-
- UF_BREP_err_cant_make_bspline - Static variable in class nxopen.uf.UFConstants
-
- UF_BREP_err_cant_make_trimsurf - Static variable in class nxopen.uf.UFConstants
-
- UF_BREP_err_edges_dont_trim_face - Static variable in class nxopen.uf.UFConstants
-
- UF_BREP_err_flatten_non_face - Static variable in class nxopen.uf.UFConstants
-
- UF_BREP_err_geom_attach - Static variable in class nxopen.uf.UFConstants
-
- UF_BREP_err_no_geometry - Static variable in class nxopen.uf.UFConstants
-
- UF_BREP_err_none - Static variable in class nxopen.uf.UFConstants
-
- UF_BREP_err_null_pointer - Static variable in class nxopen.uf.UFConstants
-
- UF_BREP_err_ref_cache_obj_is_sleepy - Static variable in class nxopen.uf.UFConstants
-
- UF_BREP_err_tight_tolerances - Static variable in class nxopen.uf.UFConstants
-
- UF_BREP_err_topo_cant_have_geom - Static variable in class nxopen.uf.UFConstants
-
- UF_BREP_err_topo_geom_mismatch - Static variable in class nxopen.uf.UFConstants
-
- UF_BREP_err_topology - Static variable in class nxopen.uf.UFConstants
-
- UF_BREP_err_trim_loop_degenerate - Static variable in class nxopen.uf.UFConstants
-
- UF_BREP_err_validate_topology - Static variable in class nxopen.uf.UFConstants
-
- UF_BREP_FINSP_OPTION - Static variable in class nxopen.uf.UFConstants
-
- UF_BREP_FLATTEN_OPTION - Static variable in class nxopen.uf.UFConstants
-
- UF_BREP_FLATTEN_PERIPH_OPTION - Static variable in class nxopen.uf.UFConstants
-
- UF_BREP_PROJECTION_DIST_OPTION - Static variable in class nxopen.uf.UFConstants
-
- UF_BREP_PROJECTION_MULT_OPTION - Static variable in class nxopen.uf.UFConstants
-
- UF_BREP_SIMPLIFY_DIST_OPTION - Static variable in class nxopen.uf.UFConstants
-
- UF_BREP_SIMPLIFY_MULT_OPTION - Static variable in class nxopen.uf.UFConstants
-
- UF_BREP_SPLIT_OPTION - Static variable in class nxopen.uf.UFConstants
-
- UF_BREP_STATE_bad_child_count - Static variable in class nxopen.uf.UFConstants
-
- UF_BREP_STATE_bad_loop - Static variable in class nxopen.uf.UFConstants
-
- UF_BREP_STATE_base - Static variable in class nxopen.uf.UFConstants
-
- UF_BREP_STATE_body_inside_out - Static variable in class nxopen.uf.UFConstants
-
- UF_BREP_STATE_degenerate_geometry - Static variable in class nxopen.uf.UFConstants
-
- UF_BREP_STATE_disjoint_shell - Static variable in class nxopen.uf.UFConstants
-
- UF_BREP_STATE_duplicate_child - Static variable in class nxopen.uf.UFConstants
-
- UF_BREP_STATE_edge_not_on_surface - Static variable in class nxopen.uf.UFConstants
-
- UF_BREP_STATE_edge_reversed - Static variable in class nxopen.uf.UFConstants
-
- UF_BREP_STATE_edge_tol_too_big - Static variable in class nxopen.uf.UFConstants
-
- UF_BREP_STATE_extra_child - Static variable in class nxopen.uf.UFConstants
-
- UF_BREP_STATE_extra_parent - Static variable in class nxopen.uf.UFConstants
-
- UF_BREP_STATE_face_error - Static variable in class nxopen.uf.UFConstants
-
- UF_BREP_STATE_face_face_inconsistency - Static variable in class nxopen.uf.UFConstants
-
- UF_BREP_STATE_face_or_edge_non_g1 - Static variable in class nxopen.uf.UFConstants
-
- UF_BREP_STATE_inconsistent_geom - Static variable in class nxopen.uf.UFConstants
-
- UF_BREP_STATE_invalid_entity_ids - Static variable in class nxopen.uf.UFConstants
-
- UF_BREP_STATE_invalid_geom - Static variable in class nxopen.uf.UFConstants
-
- UF_BREP_STATE_invalid_geometry - Static variable in class nxopen.uf.UFConstants
-
- UF_BREP_STATE_loop_inconsistent - Static variable in class nxopen.uf.UFConstants
-
- UF_BREP_STATE_missing_child - Static variable in class nxopen.uf.UFConstants
-
- UF_BREP_STATE_missing_parent - Static variable in class nxopen.uf.UFConstants
-
- UF_BREP_STATE_multi_vertex_loop - Static variable in class nxopen.uf.UFConstants
-
- UF_BREP_STATE_non_manifold - Static variable in class nxopen.uf.UFConstants
-
- UF_BREP_STATE_null_child_array - Static variable in class nxopen.uf.UFConstants
-
- UF_BREP_STATE_null_child_pointer - Static variable in class nxopen.uf.UFConstants
-
- UF_BREP_STATE_self_intersecting - Static variable in class nxopen.uf.UFConstants
-
- UF_BREP_STATE_topology_error - Static variable in class nxopen.uf.UFConstants
-
- UF_BREP_STATE_unknown_body_fault - Static variable in class nxopen.uf.UFConstants
-
- UF_BREP_STATE_unknown_child - Static variable in class nxopen.uf.UFConstants
-
- UF_BREP_STATE_unknown_geom_fault - Static variable in class nxopen.uf.UFConstants
-
- UF_BREP_STATE_vertex_not_on_curve - Static variable in class nxopen.uf.UFConstants
-
- UF_BREP_STATE_vertex_not_on_surface - Static variable in class nxopen.uf.UFConstants
-
- UF_BREP_STATE_wrong_child - Static variable in class nxopen.uf.UFConstants
-
- UF_BREP_STATE_wrong_parent - Static variable in class nxopen.uf.UFConstants
-
- UF_caegeom_body_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_caegeom_edge_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_caegeom_face_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_caegeom_region_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_caegeom_type - Static variable in class nxopen.uf.UFConstants
-
- UF_caegeom_vertex_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_caegeom_volume_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_caemisc_cylinder_density_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_caemisc_edge_density_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_caemisc_face_density_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_caemisc_fillet_density_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_caemisc_mapped_hole_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_caemisc_mmc_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_caemisc_type - Static variable in class nxopen.uf.UFConstants
-
- UF_caemisc_weld_row_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cam_body_type - Static variable in class nxopen.uf.UFConstants
-
- UF_cam_cut_method_type - Static variable in class nxopen.uf.UFConstants
-
- UF_CAM_ERROR_CUT_LEVEL_CHANGE_NOT_MADE - Static variable in class nxopen.uf.UFConstants
-
- UF_CAM_ERROR_CUT_LEVELS_NOT_SUPPORTED - Static variable in class nxopen.uf.UFConstants
-
- UF_CAM_ERROR_DATA_MATCH - Static variable in class nxopen.uf.UFConstants
-
- UF_CAM_ERROR_DATA_NOT_AVAILABLE - Static variable in class nxopen.uf.UFConstants
-
- UF_CAM_ERROR_DATA_NOT_CORRECT_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_CAM_ERROR_DUPLICATE_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_CAM_ERROR_FROM_TURNING_PROCESSOR - Static variable in class nxopen.uf.UFConstants
-
- UF_CAM_ERROR_GOUGE_CHECK_NOT_SUPPORTED - Static variable in class nxopen.uf.UFConstants
-
- UF_CAM_ERROR_HOLDER_UPDATE_ONLY - Static variable in class nxopen.uf.UFConstants
-
- UF_CAM_ERROR_INCONSISTENT_IPW_BOX - Static variable in class nxopen.uf.UFConstants
-
- UF_CAM_ERROR_INSPECTION_SETUP - Static variable in class nxopen.uf.UFConstants
-
- UF_CAM_ERROR_INSPECTION_TEMPLATE - Static variable in class nxopen.uf.UFConstants
-
- UF_CAM_ERROR_INVALID_APP_DATA - Static variable in class nxopen.uf.UFConstants
-
- UF_CAM_ERROR_INVALID_CUSTOM_POINT_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_CAM_ERROR_INVALID_CUT_LEVEL_ENTITY - Static variable in class nxopen.uf.UFConstants
-
- UF_CAM_ERROR_INVALID_DIAMETER - Static variable in class nxopen.uf.UFConstants
-
- UF_CAM_ERROR_INVALID_DRIVE_GEOMETRY - Static variable in class nxopen.uf.UFConstants
-
- UF_CAM_ERROR_INVALID_DRIVE_METHOD - Static variable in class nxopen.uf.UFConstants
-
- UF_CAM_ERROR_INVALID_GROUP_DATA - Static variable in class nxopen.uf.UFConstants
-
- UF_CAM_ERROR_INVALID_INDEX - Static variable in class nxopen.uf.UFConstants
-
- UF_CAM_ERROR_INVALID_INHERITED_ENTITY - Static variable in class nxopen.uf.UFConstants
-
- UF_CAM_ERROR_INVALID_INPUT - Static variable in class nxopen.uf.UFConstants
-
- UF_CAM_ERROR_INVALID_INPUT_ENTITY - Static variable in class nxopen.uf.UFConstants
-
- UF_CAM_ERROR_INVALID_LENGTH - Static variable in class nxopen.uf.UFConstants
-
- UF_CAM_ERROR_INVALID_POCKET_NUM_OF_TOOLS - Static variable in class nxopen.uf.UFConstants
-
- UF_CAM_ERROR_INVALID_RADIUS - Static variable in class nxopen.uf.UFConstants
-
- UF_CAM_ERROR_INVALID_TAPER - Static variable in class nxopen.uf.UFConstants
-
- UF_CAM_ERROR_INVALID_TURN_WORKPIECE_DIAMETER - Static variable in class nxopen.uf.UFConstants
-
- UF_CAM_ERROR_INVALID_TURN_WORKPIECE_DIRECTION - Static variable in class nxopen.uf.UFConstants
-
- UF_CAM_ERROR_INVALID_TURN_WORKPIECE_INNER_DIAMETER - Static variable in class nxopen.uf.UFConstants
-
- UF_CAM_ERROR_INVALID_TURN_WORKPIECE_LENGTH - Static variable in class nxopen.uf.UFConstants
-
- UF_CAM_ERROR_INVALID_TURN_WORKPIECE_STOCK - Static variable in class nxopen.uf.UFConstants
-
- UF_CAM_ERROR_INVALID_TYPE_OF_WORKPIECE - Static variable in class nxopen.uf.UFConstants
-
- UF_CAM_ERROR_IPW_DOES_NOT_EXIST - Static variable in class nxopen.uf.UFConstants
-
- UF_CAM_ERROR_LIBRARY_NOT_FOUND - Static variable in class nxopen.uf.UFConstants
-
- UF_CAM_ERROR_MANUFACTURING_SETUP - Static variable in class nxopen.uf.UFConstants
-
- UF_CAM_ERROR_MANUFACTURING_TEMPLATE - Static variable in class nxopen.uf.UFConstants
-
- UF_CAM_ERROR_NO_CURRENT_OPT - Static variable in class nxopen.uf.UFConstants
-
- UF_CAM_ERROR_NO_CUT_METHOD - Static variable in class nxopen.uf.UFConstants
-
- UF_CAM_ERROR_NO_FEEDS_SPEEDS_LIBRARY - Static variable in class nxopen.uf.UFConstants
-
- UF_CAM_ERROR_NO_MATCHING_RECORD - Static variable in class nxopen.uf.UFConstants
-
- UF_CAM_ERROR_NO_PART_MATERIAL - Static variable in class nxopen.uf.UFConstants
-
- UF_CAM_ERROR_NO_SETUP - Static variable in class nxopen.uf.UFConstants
-
- UF_CAM_ERROR_NO_TOOL_MATERIAL - Static variable in class nxopen.uf.UFConstants
-
- UF_CAM_ERROR_NOT_AUTO_BLANK - Static variable in class nxopen.uf.UFConstants
-
- UF_CAM_ERROR_NOT_LIBRARY_HOLDER - Static variable in class nxopen.uf.UFConstants
-
- UF_CAM_ERROR_NOT_LIBRARY_TOOL - Static variable in class nxopen.uf.UFConstants
-
- UF_CAM_ERROR_NOT_PLANAR_FACE - Static variable in class nxopen.uf.UFConstants
-
- UF_CAM_ERROR_OBJECT_IS_NOT_TAGGED_OBJECT - Static variable in class nxopen.uf.UFConstants
-
- UF_CAM_ERROR_OBJECT_NOT_DESIRED_CLASS - Static variable in class nxopen.uf.UFConstants
-
- UF_CAM_ERROR_PLANE_NOT_DEFINED - Static variable in class nxopen.uf.UFConstants
-
- UF_CAM_ERROR_POINT_NOT_FOUND - Static variable in class nxopen.uf.UFConstants
-
- UF_CAM_ERROR_PREFERENCE_NOT_DEFINED - Static variable in class nxopen.uf.UFConstants
-
- UF_CAM_ERROR_READ_ONLY_PARAM - Static variable in class nxopen.uf.UFConstants
-
- UF_CAM_ERROR_REMOVE_DEPENDENCIES - Static variable in class nxopen.uf.UFConstants
-
- UF_CAM_ERROR_RESTORE_DEPENDENCIES - Static variable in class nxopen.uf.UFConstants
-
- UF_CAM_ERROR_SAVE_SPINNING_IPW_AS_PART - Static variable in class nxopen.uf.UFConstants
-
- UF_CAM_ERROR_SINGLE_RANGE_NOT_CHANGED - Static variable in class nxopen.uf.UFConstants
-
- UF_CAM_ERROR_TAG_IS_NOT_TAGGED_OBJECT - Static variable in class nxopen.uf.UFConstants
-
- UF_CAM_ERROR_TAG_NOT_CORRECT_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_CAM_ERROR_TOOLS_NOT_SAME_SUBTYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_CAM_ERROR_TOOLS_NOT_SAME_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_CAM_ERROR_UNDEFINED_TURN_WORKPIECE_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_CAM_ERROR_UPDATE_GEOMETRY_DEPENDENCIES - Static variable in class nxopen.uf.UFConstants
-
- UF_cam_feature_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cam_follower_type - Static variable in class nxopen.uf.UFConstants
-
- UF_cam_material_type - Static variable in class nxopen.uf.UFConstants
-
- UF_CAM_MAX_TEMPLATE_SET_NAME_LEN - Static variable in class nxopen.uf.UFConstants
-
- UF_CAM_PREPRO_ERROR_BASE - Static variable in class nxopen.uf.UFConstants
-
- UF_CAM_PREPRO_invalid_model - Static variable in class nxopen.uf.UFConstants
-
- UF_CAM_SESSION_ERROR_NO_SESSION - Static variable in class nxopen.uf.UFConstants
-
- UF_cam_solid_cross_section - Static variable in class nxopen.uf.UFConstants
-
- UF_cam_type - Static variable in class nxopen.uf.UFConstants
-
- UF_camera_type - Static variable in class nxopen.uf.UFConstants
-
- UF_canned_layout_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_CANT_USE_SECTION - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_3x_circular_cust_feed_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_3x_circular_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_3x_circular_with_feed_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_3x_helical_cust_feed_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_3x_helical_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_3x_helical_with_feed_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_3x_linear_cust_feed_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_3x_linear_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_3x_linear_with_feed_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_3x_nurbs_cust_feed_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_3x_nurbs_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_3x_nurbs_with_feed_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_5x_circular_cust_feed_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_5x_circular_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_5x_circular_with_feed_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_5x_helical_cust_feed_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_5x_helical_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_5x_helical_with_feed_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_5x_linear_cust_feed_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_5x_linear_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_5x_linear_with_feed_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_5x_nurbs_cust_feed_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_5x_nurbs_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_5x_nurbs_with_feed_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_end_of_pass_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_end_of_path_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_manual_pattern_action_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_mce_auxfun_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_mce_clamp_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_mce_coolantOff_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_mce_coolantOn_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_mce_cutcom_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_mce_cutWire_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_mce_cycle_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_mce_dwell_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_mce_fedrat_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_mce_flush_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_mce_flushTank_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_mce_from_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_mce_fromPoint_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_mce_goDelta_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_mce_goHome_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_mce_gohomePoint_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_mce_goto_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_mce_latheThread_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_mce_opMessage_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_mce_optSkipOff_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_mce_optSkipOn_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_mce_optStop_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_mce_origin_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_mce_power_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_mce_pprint_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_mce_prefun_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_mce_returnPoint_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_mce_rotate_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_mce_selectHead_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_mce_seqno_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_mce_setModes_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_mce_smoothLeadIn_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_mce_smoothLeadOut_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_mce_spindleOff_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_mce_spindleOn_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_mce_spindleReverse_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_mce_startEngage_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_mce_startPoint_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_mce_stop_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_mce_threadWire_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_mce_toolChange_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_mce_toolLengthComp_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_mce_toolPreselect_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_mce_trackingPointChange_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_mce_userDefined_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_mce_wireAngle_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_mce_wireCutcom_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_mce_wireGuides_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_mf_change_status_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_mf_close_debug_files_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_mf_counter_value_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_mf_cut_level_plane_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_mf_display_font_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_mf_dump_buffers_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_mf_fillet_params_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_mf_gouge_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_mf_highlight_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_mf_last_clsf_event_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_mf_list_deletion_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_mf_local_return_end_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_mf_local_return_start_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_mf_message_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_mf_msys_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_mf_operation_name_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_mf_output_gohome_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_mf_slowdown_params_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_mf_start_of_fillet_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_mf_tldata_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_mf_unpropagable_event_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_mom_post_event_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_motion_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_scud_updown_cut_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_set_marker_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_start_of_pass_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_start_of_path_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_start_point_output_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_ud_path_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_udc_off_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_udc_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cevent_ude_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_CFI_ALWAYS_REPLACE - Static variable in class nxopen.uf.UFConstants
-
- UF_CFI_COPY - Static variable in class nxopen.uf.UFConstants
-
- UF_CFI_COPY_ALWAYS_REPLACE - Static variable in class nxopen.uf.UFConstants
-
- UF_CFI_COPY_LEGACY - Static variable in class nxopen.uf.UFConstants
-
- UF_CFI_COPY_NEVER_REPLACE - Static variable in class nxopen.uf.UFConstants
-
- UF_CFI_COPY_REPLACE_IF_NEWER - Static variable in class nxopen.uf.UFConstants
-
- UF_CFI_LEGACY - Static variable in class nxopen.uf.UFConstants
-
- UF_CFI_MAX_FILE_NAME_BUFSIZE - Static variable in class nxopen.uf.UFConstants
-
- UF_CFI_MAX_FILE_NAME_NCHARS - Static variable in class nxopen.uf.UFConstants
-
- UF_CFI_MAX_PATH_NAME_BUFSIZE - Static variable in class nxopen.uf.UFConstants
-
- UF_CFI_MAX_PATH_NAME_NCHARS - Static variable in class nxopen.uf.UFConstants
-
- UF_CFI_MOVE - Static variable in class nxopen.uf.UFConstants
-
- UF_CFI_MOVE_ALWAYS_REPLACE - Static variable in class nxopen.uf.UFConstants
-
- UF_CFI_MOVE_LEGACY - Static variable in class nxopen.uf.UFConstants
-
- UF_CFI_MOVE_NEVER_REPLACE - Static variable in class nxopen.uf.UFConstants
-
- UF_CFI_MOVE_REPLACE_IF_NEWER - Static variable in class nxopen.uf.UFConstants
-
- UF_CFI_NEVER_REPLACE - Static variable in class nxopen.uf.UFConstants
-
- UF_CFI_REPLACE_IF_NEWER - Static variable in class nxopen.uf.UFConstants
-
- UF_cgfx_material_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_CGM_MAX_COLORS - Static variable in class nxopen.uf.UFConstants
-
- UF_CGM_MAX_NAME_SIZE - Static variable in class nxopen.uf.UFConstants
-
- UF_CGM_MAX_WIDTHS - Static variable in class nxopen.uf.UFConstants
-
- UF_CGM_NO_FAVORITE - Static variable in class nxopen.uf.UFConstants
-
- UF_CGM_NOT_CUSTOM_WIDTH - Static variable in class nxopen.uf.UFConstants
-
- UF_CGM_WIDTH_1 - Static variable in class nxopen.uf.UFConstants
-
- UF_CGM_WIDTH_2 - Static variable in class nxopen.uf.UFConstants
-
- UF_CGM_WIDTH_3 - Static variable in class nxopen.uf.UFConstants
-
- UF_CGM_WIDTH_4 - Static variable in class nxopen.uf.UFConstants
-
- UF_CGM_WIDTH_5 - Static variable in class nxopen.uf.UFConstants
-
- UF_CGM_WIDTH_6 - Static variable in class nxopen.uf.UFConstants
-
- UF_CGM_WIDTH_7 - Static variable in class nxopen.uf.UFConstants
-
- UF_CGM_WIDTH_8 - Static variable in class nxopen.uf.UFConstants
-
- UF_CGM_WIDTH_9 - Static variable in class nxopen.uf.UFConstants
-
- UF_CGM_WIDTH_NORMAL - Static variable in class nxopen.uf.UFConstants
-
- UF_CGM_WIDTH_THICK - Static variable in class nxopen.uf.UFConstants
-
- UF_CGM_WIDTH_THIN - Static variable in class nxopen.uf.UFConstants
-
- UF_circle_closed_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_circle_open_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_circle_type - Static variable in class nxopen.uf.UFConstants
-
- UF_circular_area_instance_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_circular_pattern_definition_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_circular_runout_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_circular_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_CLEAR_ABORTED_BY_USER - Static variable in class nxopen.uf.UFConstants
-
- UF_CLEAR_ABORTED_ON_ERROR - Static variable in class nxopen.uf.UFConstants
-
- UF_CLEAR_ALL_BUT - Static variable in class nxopen.uf.UFConstants
-
- UF_CLEAR_ALL_OBJECTS - Static variable in class nxopen.uf.UFConstants
-
- UF_CLEAR_ALL_VISIBLE_OBJECTS - Static variable in class nxopen.uf.UFConstants
-
- UF_CLEAR_BEST_AVAILABLE - Static variable in class nxopen.uf.UFConstants
-
- UF_CLEAR_BEST_AVAILABLE_BASED - Static variable in class nxopen.uf.UFConstants
-
- UF_CLEAR_CONT_1_IN_2_INTERFERENCE - Static variable in class nxopen.uf.UFConstants
-
- UF_CLEAR_CONT_2_IN_1_INTERFERENCE - Static variable in class nxopen.uf.UFConstants
-
- UF_CLEAR_COPY_INTERF_BODIES - Static variable in class nxopen.uf.UFConstants
-
- UF_CLEAR_COPY_NO_RESULTS - Static variable in class nxopen.uf.UFConstants
-
- UF_CLEAR_COPY_RESULTS - Static variable in class nxopen.uf.UFConstants
-
- UF_CLEAR_err_analysis_error - Static variable in class nxopen.uf.UFConstants
-
- UF_CLEAR_err_bad_analysis_mode - Static variable in class nxopen.uf.UFConstants
-
- UF_CLEAR_err_bad_color - Static variable in class nxopen.uf.UFConstants
-
- UF_CLEAR_err_bad_copy_mode - Static variable in class nxopen.uf.UFConstants
-
- UF_CLEAR_err_bad_dataset - Static variable in class nxopen.uf.UFConstants
-
- UF_CLEAR_err_bad_exclude_rules - Static variable in class nxopen.uf.UFConstants
-
- UF_CLEAR_err_bad_expression - Static variable in class nxopen.uf.UFConstants
-
- UF_CLEAR_err_bad_interf - Static variable in class nxopen.uf.UFConstants
-
- UF_CLEAR_err_bad_layer - Static variable in class nxopen.uf.UFConstants
-
- UF_CLEAR_err_bad_list_data - Static variable in class nxopen.uf.UFConstants
-
- UF_CLEAR_err_bad_list_num - Static variable in class nxopen.uf.UFConstants
-
- UF_CLEAR_err_bad_list_type - Static variable in class nxopen.uf.UFConstants
-
- UF_CLEAR_err_bad_msg_filter - Static variable in class nxopen.uf.UFConstants
-
- UF_CLEAR_err_bad_num_zones - Static variable in class nxopen.uf.UFConstants
-
- UF_CLEAR_err_bad_pair - Static variable in class nxopen.uf.UFConstants
-
- UF_CLEAR_err_bad_part - Static variable in class nxopen.uf.UFConstants
-
- UF_CLEAR_err_bad_string - Static variable in class nxopen.uf.UFConstants
-
- UF_CLEAR_err_cant_find_dataset - Static variable in class nxopen.uf.UFConstants
-
- UF_CLEAR_err_cant_find_point - Static variable in class nxopen.uf.UFConstants
-
- UF_CLEAR_err_facet_err - Static variable in class nxopen.uf.UFConstants
-
- UF_CLEAR_err_name_exists - Static variable in class nxopen.uf.UFConstants
-
- UF_CLEAR_err_no_results - Static variable in class nxopen.uf.UFConstants
-
- UF_CLEAR_err_no_work_part - Static variable in class nxopen.uf.UFConstants
-
- UF_CLEAR_err_not_clranl_obj - Static variable in class nxopen.uf.UFConstants
-
- UF_CLEAR_err_null_pointer - Static variable in class nxopen.uf.UFConstants
-
- UF_CLEAR_err_obj_not_avail - Static variable in class nxopen.uf.UFConstants
-
- UF_CLEAR_err_sheet_intersect - Static variable in class nxopen.uf.UFConstants
-
- UF_CLEAR_ERROR_BASE - Static variable in class nxopen.uf.UFConstants
-
- UF_CLEAR_EXCL_COMP_SUPPRESSED - Static variable in class nxopen.uf.UFConstants
-
- UF_CLEAR_EXCL_MATED_COMP - Static variable in class nxopen.uf.UFConstants
-
- UF_CLEAR_EXCL_NO_REASON - Static variable in class nxopen.uf.UFConstants
-
- UF_CLEAR_EXCL_NON_GEOM - Static variable in class nxopen.uf.UFConstants
-
- UF_CLEAR_EXCL_SAME_COMP - Static variable in class nxopen.uf.UFConstants
-
- UF_CLEAR_EXCL_SAME_GROUP - Static variable in class nxopen.uf.UFConstants
-
- UF_CLEAR_EXCL_SAME_PART - Static variable in class nxopen.uf.UFConstants
-
- UF_CLEAR_EXCL_UNIT_SUBASSY - Static variable in class nxopen.uf.UFConstants
-
- UF_CLEAR_EXCL_USER_DEF - Static variable in class nxopen.uf.UFConstants
-
- UF_CLEAR_EXCLUDE_MATING_PAIRS - Static variable in class nxopen.uf.UFConstants
-
- UF_CLEAR_EXCLUDE_WITHIN_COMP - Static variable in class nxopen.uf.UFConstants
-
- UF_CLEAR_EXCLUDE_WITHIN_GROUP - Static variable in class nxopen.uf.UFConstants
-
- UF_CLEAR_EXCLUDE_WITHIN_PART - Static variable in class nxopen.uf.UFConstants
-
- UF_CLEAR_EXHAUSTIVE_FACET_MODE - Static variable in class nxopen.uf.UFConstants
-
- UF_CLEAR_FACET_BASED - Static variable in class nxopen.uf.UFConstants
-
- UF_CLEAR_FACET_SOLID - Static variable in class nxopen.uf.UFConstants
-
- UF_CLEAR_FIXED_LIST - Static variable in class nxopen.uf.UFConstants
-
- UF_CLEAR_FULL_FACET - Static variable in class nxopen.uf.UFConstants
-
- UF_CLEAR_HARD_INTERFERENCE - Static variable in class nxopen.uf.UFConstants
-
- UF_CLEAR_LIST2_NOT_USED - Static variable in class nxopen.uf.UFConstants
-
- UF_CLEAR_NEW_INTERFERENCE - Static variable in class nxopen.uf.UFConstants
-
- UF_CLEAR_NO_INTERFERENCE - Static variable in class nxopen.uf.UFConstants
-
- UF_CLEAR_NOT_ABORTED - Static variable in class nxopen.uf.UFConstants
-
- UF_CLEAR_QUICK_FACET - Static variable in class nxopen.uf.UFConstants
-
- UF_CLEAR_SOFT_INTERFERENCE - Static variable in class nxopen.uf.UFConstants
-
- UF_CLEAR_SOLID - Static variable in class nxopen.uf.UFConstants
-
- UF_CLEAR_SOLID_BASED - Static variable in class nxopen.uf.UFConstants
-
- UF_CLEAR_TOUCH_INTERFERENCE - Static variable in class nxopen.uf.UFConstants
-
- UF_CLEAR_USING_DEFAULT_CZ - Static variable in class nxopen.uf.UFConstants
-
- UF_CLEAR_USING_DEFINED_CZ - Static variable in class nxopen.uf.UFConstants
-
- UF_CLEAR_USING_OBJ1_CZ - Static variable in class nxopen.uf.UFConstants
-
- UF_CLEAR_USING_OBJ2_CZ - Static variable in class nxopen.uf.UFConstants
-
- UF_CLEAR_USING_PAIR_CZ - Static variable in class nxopen.uf.UFConstants
-
- UF_CLONE_err_active - Static variable in class nxopen.uf.UFConstants
-
- UF_CLONE_err_appdata_not_found - Static variable in class nxopen.uf.UFConstants
-
- UF_CLONE_err_bvr_out_of_sync - Static variable in class nxopen.uf.UFConstants
-
- UF_CLONE_err_comp_not_found - Static variable in class nxopen.uf.UFConstants
-
- UF_CLONE_err_corrupt_part_file - Static variable in class nxopen.uf.UFConstants
-
- UF_CLONE_err_dryrun_with_no_logfile - Static variable in class nxopen.uf.UFConstants
-
- UF_CLONE_err_family_member - Static variable in class nxopen.uf.UFConstants
-
- UF_CLONE_err_invalid_folder - Static variable in class nxopen.uf.UFConstants
-
- UF_CLONE_err_invalid_logfile - Static variable in class nxopen.uf.UFConstants
-
- UF_CLONE_err_iterator_active - Static variable in class nxopen.uf.UFConstants
-
- UF_CLONE_err_naming_failures - Static variable in class nxopen.uf.UFConstants
-
- UF_CLONE_err_no_copy_access - Static variable in class nxopen.uf.UFConstants
-
- UF_CLONE_err_no_iterator - Static variable in class nxopen.uf.UFConstants
-
- UF_CLONE_err_no_relative_cb - Static variable in class nxopen.uf.UFConstants
-
- UF_CLONE_err_not_active - Static variable in class nxopen.uf.UFConstants
-
- UF_CLONE_err_part_not_present - Static variable in class nxopen.uf.UFConstants
-
- UF_CLONE_err_validation_failures - Static variable in class nxopen.uf.UFConstants
-
- UF_CLONE_err_xml_nested_alt_reps - Static variable in class nxopen.uf.UFConstants
-
- UF_coaxial_constraint_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_coincident_constraint_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_color_table_type - Static variable in class nxopen.uf.UFConstants
-
- UF_combined_attribute_instance_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_combined_drafting_instance_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_complex_feature_instance_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_complex_tolerance_feature_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_complex_tolerance_subfeature_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_component2d_definition_type - Static variable in class nxopen.uf.UFConstants
-
- UF_component2d_type - Static variable in class nxopen.uf.UFConstants
-
- UF_component_constraint_group_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_component_constraint_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_component_filter_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_component_set_type - Static variable in class nxopen.uf.UFConstants
-
- UF_component_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_component_type - Static variable in class nxopen.uf.UFConstants
-
- UF_composite_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_concentric_constraint_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_concentric_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cone_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cone_type - Static variable in class nxopen.uf.UFConstants
-
- UF_conic_ellipse_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_conic_hyperbola_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_conic_parabola_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_conic_type - Static variable in class nxopen.uf.UFConstants
-
- UF_connection1_type - Static variable in class nxopen.uf.UFConstants
-
- UF_connection_normal_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_connection_offpage_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_connection_special_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_connection_type - Static variable in class nxopen.uf.UFConstants
-
- UF_constraint_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_constraint_type - Static variable in class nxopen.uf.UFConstants
-
- UF_CONT_CANT_ADD_RULE - Static variable in class nxopen.uf.UFConstants
-
- UF_CONT_CANT_CREATE_SECTION - Static variable in class nxopen.uf.UFConstants
-
- UF_CONT_CANT_REMOVE_RULE - Static variable in class nxopen.uf.UFConstants
-
- UF_CONT_CANT_SET_DIRECTION - Static variable in class nxopen.uf.UFConstants
-
- UF_CONT_CANT_SET_START - Static variable in class nxopen.uf.UFConstants
-
- UF_CONT_INVALID_FACE_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_CONT_INVALID_RULE_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_CONT_INVALID_SECTION - Static variable in class nxopen.uf.UFConstants
-
- UF_CONT_INVALID_TAG - Static variable in class nxopen.uf.UFConstants
-
- UF_CONT_INVALID_WIRE_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_CONT_MULTIPLE_LOOPS - Static variable in class nxopen.uf.UFConstants
-
- UF_CONT_NO_RULES - Static variable in class nxopen.uf.UFConstants
-
- UF_coordinate_system_type - Static variable in class nxopen.uf.UFConstants
-
- UF_coplanar_constraint_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cross_section_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cs2_constraint_system_type - Static variable in class nxopen.uf.UFConstants
-
- UF_cs2_constraint_type - Static variable in class nxopen.uf.UFConstants
-
- UF_cs2_dim_helped_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cs2_dim_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cs2_equation_constraint_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cs2_helped_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cs2_offset_constraint_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cs2_pattern_constraint_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cs2_pattern_value_constraint_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cs2_permanent_cs_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cs2_pgm_offset_constraint_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cs2_point_on_loop_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cs2_polygon_constraint_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cs2_recipe_trim_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cs2_rigid_set_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cs2_rigid_set_type - Static variable in class nxopen.uf.UFConstants
-
- UF_cs2_simple_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cs2_string_constraint_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cs2_temporary_cs_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cs2_trim_constraint_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cs2_vertex_type - Static variable in class nxopen.uf.UFConstants
-
- UF_csys_cylindrical_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_CSYS_ERR_INVALID_COORDS - Static variable in class nxopen.uf.UFConstants
-
- UF_csys_normal_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_CSYS_ROOT_COORDS - Static variable in class nxopen.uf.UFConstants
-
- UF_CSYS_ROOT_WCS_COORDS - Static variable in class nxopen.uf.UFConstants
-
- UF_csys_spherical_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_csys_wcs_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_CSYS_WORK_COORDS - Static variable in class nxopen.uf.UFConstants
-
- UF_CURVE_2_CURVE - Static variable in class nxopen.uf.UFConstants
-
- UF_CURVE_3_CURVE - Static variable in class nxopen.uf.UFConstants
-
- UF_CURVE_AMBIGUOUS_ENDS - Static variable in class nxopen.uf.UFConstants
-
- UF_CURVE_ANGLE_INVALID - Static variable in class nxopen.uf.UFConstants
-
- UF_CURVE_ANGLES_EXCEED_2PI - Static variable in class nxopen.uf.UFConstants
-
- UF_CURVE_CANT_EVAL_FIXED_LENGTH - Static variable in class nxopen.uf.UFConstants
-
- UF_CURVE_CIRCLE_IN_FILLET - Static variable in class nxopen.uf.UFConstants
-
- UF_CURVE_CIRCULAR_SHAPE - Static variable in class nxopen.uf.UFConstants
-
- UF_CURVE_CLOSED_NON_PERIODIC_CURVE - Static variable in class nxopen.uf.UFConstants
-
- UF_CURVE_CLOSED_PERIODIC_CURVE - Static variable in class nxopen.uf.UFConstants
-
- UF_CURVE_CONT_ORDER_ILLEGAL - Static variable in class nxopen.uf.UFConstants
-
- UF_curve_continuity_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_CURVE_CRVATR_AUTO_DIR - Static variable in class nxopen.uf.UFConstants
-
- UF_CURVE_CRVATR_NONE - Static variable in class nxopen.uf.UFConstants
-
- UF_CURVE_CRVATR_VEC - Static variable in class nxopen.uf.UFConstants
-
- UF_CURVE_CURVATURE - Static variable in class nxopen.uf.UFConstants
-
- UF_curve_curvature_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_CURVE_ENDPOINTS_Z_DIFFERENT - Static variable in class nxopen.uf.UFConstants
-
- UF_CURVE_FILLET_IN_CIRCLE - Static variable in class nxopen.uf.UFConstants
-
- UF_curve_group_type - Static variable in class nxopen.uf.UFConstants
-
- UF_CURVE_INVALID_SUBTYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_CURVE_LINEAR_SHAPE - Static variable in class nxopen.uf.UFConstants
-
- UF_CURVE_LOC - Static variable in class nxopen.uf.UFConstants
-
- UF_CURVE_LOC_1STDERV - Static variable in class nxopen.uf.UFConstants
-
- UF_CURVE_LOC_1STDERV_2NDDERV - Static variable in class nxopen.uf.UFConstants
-
- UF_CURVE_NATURAL_SHAPE - Static variable in class nxopen.uf.UFConstants
-
- UF_CURVE_NOT_A_CONIC - Static variable in class nxopen.uf.UFConstants
-
- UF_CURVE_NOT_A_CONIC_TAG - Static variable in class nxopen.uf.UFConstants
-
- UF_CURVE_NOT_A_LINE_TAG - Static variable in class nxopen.uf.UFConstants
-
- UF_CURVE_NOT_A_MATRIX_TAG - Static variable in class nxopen.uf.UFConstants
-
- UF_CURVE_NOT_A_POINT_TAG - Static variable in class nxopen.uf.UFConstants
-
- UF_CURVE_NOT_A_SPLINE_TAG - Static variable in class nxopen.uf.UFConstants
-
- UF_CURVE_NOT_AN_ARC_TAG - Static variable in class nxopen.uf.UFConstants
-
- UF_CURVE_OPEN_CURVE - Static variable in class nxopen.uf.UFConstants
-
- UF_CURVE_SLOPE_AUTO - Static variable in class nxopen.uf.UFConstants
-
- UF_CURVE_SLOPE_DIR - Static variable in class nxopen.uf.UFConstants
-
- UF_CURVE_SLOPE_NONE - Static variable in class nxopen.uf.UFConstants
-
- UF_CURVE_SLOPE_VEC - Static variable in class nxopen.uf.UFConstants
-
- UF_CURVE_SPLINE_CANT_CREATE - Static variable in class nxopen.uf.UFConstants
-
- UF_CURVE_SPLINE_DEGENERATE - Static variable in class nxopen.uf.UFConstants
-
- UF_CURVE_SPLINE_ILLEGAL_DATA - Static variable in class nxopen.uf.UFConstants
-
- UF_CURVE_SPLINE_WEIGHT_NONPOS - Static variable in class nxopen.uf.UFConstants
-
- UF_CURVE_START_EXCEEDS_END - Static variable in class nxopen.uf.UFConstants
-
- UF_CURVE_STATE_CLAMPED - Static variable in class nxopen.uf.UFConstants
-
- UF_CURVE_STATE_CLOSED - Static variable in class nxopen.uf.UFConstants
-
- UF_CURVE_STATE_DEGENERACY - Static variable in class nxopen.uf.UFConstants
-
- UF_CURVE_STATE_G1_DISCONTINUITY - Static variable in class nxopen.uf.UFConstants
-
- UF_CURVE_STATE_KNOT_DECREASING - Static variable in class nxopen.uf.UFConstants
-
- UF_CURVE_STATE_KNOT_MULT - Static variable in class nxopen.uf.UFConstants
-
- UF_CURVE_STATE_KNOT_NONC0 - Static variable in class nxopen.uf.UFConstants
-
- UF_CURVE_STATE_KNOT_TOOCLOSE - Static variable in class nxopen.uf.UFConstants
-
- UF_CURVE_STATE_NOT_TRIMMED - Static variable in class nxopen.uf.UFConstants
-
- UF_CURVE_STATE_PERIODIC - Static variable in class nxopen.uf.UFConstants
-
- UF_CURVE_STATE_RANGE_END - Static variable in class nxopen.uf.UFConstants
-
- UF_CURVE_STATE_RANGE_START - Static variable in class nxopen.uf.UFConstants
-
- UF_CURVE_STATE_SMOOTHED_TO_CN - Static variable in class nxopen.uf.UFConstants
-
- UF_CURVE_STATE_UNNORMALIZED - Static variable in class nxopen.uf.UFConstants
-
- UF_CURVE_TANGENT - Static variable in class nxopen.uf.UFConstants
-
- UF_CURVE_TANGENT_OUTSIDE - Static variable in class nxopen.uf.UFConstants
-
- UF_CURVE_TRIM_MULT_PTS - Static variable in class nxopen.uf.UFConstants
-
- UF_custom_parameter_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_custom_parameters_map_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cut_segment_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_CUTTER_SUBTYPE_DRILL_BORE - Static variable in class nxopen.uf.UFConstants
-
- UF_CUTTER_SUBTYPE_DRILL_CENTER_BELL - Static variable in class nxopen.uf.UFConstants
-
- UF_CUTTER_SUBTYPE_DRILL_COUNTERBORE - Static variable in class nxopen.uf.UFConstants
-
- UF_CUTTER_SUBTYPE_DRILL_COUNTERSINK - Static variable in class nxopen.uf.UFConstants
-
- UF_CUTTER_SUBTYPE_DRILL_REAM - Static variable in class nxopen.uf.UFConstants
-
- UF_CUTTER_SUBTYPE_DRILL_SPOT_DRILL - Static variable in class nxopen.uf.UFConstants
-
- UF_CUTTER_SUBTYPE_DRILL_SPOT_FACE - Static variable in class nxopen.uf.UFConstants
-
- UF_CUTTER_SUBTYPE_DRILL_STD - Static variable in class nxopen.uf.UFConstants
-
- UF_CUTTER_SUBTYPE_DRILL_STEP - Static variable in class nxopen.uf.UFConstants
-
- UF_CUTTER_SUBTYPE_DRILL_TAP - Static variable in class nxopen.uf.UFConstants
-
- UF_CUTTER_SUBTYPE_DRILL_THREAD_MILL - Static variable in class nxopen.uf.UFConstants
-
- UF_CUTTER_SUBTYPE_GENERIC - Static variable in class nxopen.uf.UFConstants
-
- UF_CUTTER_SUBTYPE_GROOVE_FNR - Static variable in class nxopen.uf.UFConstants
-
- UF_CUTTER_SUBTYPE_GROOVE_RING - Static variable in class nxopen.uf.UFConstants
-
- UF_CUTTER_SUBTYPE_GROOVE_STD - Static variable in class nxopen.uf.UFConstants
-
- UF_CUTTER_SUBTYPE_GROOVE_USER - Static variable in class nxopen.uf.UFConstants
-
- UF_CUTTER_SUBTYPE_LASER - Static variable in class nxopen.uf.UFConstants
-
- UF_CUTTER_SUBTYPE_MILL_10 - Static variable in class nxopen.uf.UFConstants
-
- UF_CUTTER_SUBTYPE_MILL_5 - Static variable in class nxopen.uf.UFConstants
-
- UF_CUTTER_SUBTYPE_MILL_7 - Static variable in class nxopen.uf.UFConstants
-
- UF_CUTTER_SUBTYPE_MILL_BALL - Static variable in class nxopen.uf.UFConstants
-
- UF_CUTTER_SUBTYPE_MILL_CHAMFER - Static variable in class nxopen.uf.UFConstants
-
- UF_CUTTER_SUBTYPE_MILL_SPHERICAL - Static variable in class nxopen.uf.UFConstants
-
- UF_CUTTER_SUBTYPE_PROBE - Static variable in class nxopen.uf.UFConstants
-
- UF_CUTTER_SUBTYPE_THREAD_STD - Static variable in class nxopen.uf.UFConstants
-
- UF_CUTTER_SUBTYPE_THREAD_TRAP - Static variable in class nxopen.uf.UFConstants
-
- UF_CUTTER_SUBTYPE_TURN_BORING_BAR - Static variable in class nxopen.uf.UFConstants
-
- UF_CUTTER_SUBTYPE_TURN_BUTTON - Static variable in class nxopen.uf.UFConstants
-
- UF_CUTTER_SUBTYPE_TURN_STD - Static variable in class nxopen.uf.UFConstants
-
- UF_cutter_tracking_point_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_CUTTER_TYPE_BARREL - Static variable in class nxopen.uf.UFConstants
-
- UF_CUTTER_TYPE_DRILL - Static variable in class nxopen.uf.UFConstants
-
- UF_CUTTER_TYPE_FORM - Static variable in class nxopen.uf.UFConstants
-
- UF_CUTTER_TYPE_GROOVE - Static variable in class nxopen.uf.UFConstants
-
- UF_CUTTER_TYPE_MILL - Static variable in class nxopen.uf.UFConstants
-
- UF_CUTTER_TYPE_SOFT - Static variable in class nxopen.uf.UFConstants
-
- UF_CUTTER_TYPE_SOLID - Static variable in class nxopen.uf.UFConstants
-
- UF_CUTTER_TYPE_T - Static variable in class nxopen.uf.UFConstants
-
- UF_CUTTER_TYPE_THREAD - Static variable in class nxopen.uf.UFConstants
-
- UF_CUTTER_TYPE_TURN - Static variable in class nxopen.uf.UFConstants
-
- UF_cylinder_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cylinder_type - Static variable in class nxopen.uf.UFConstants
-
- UF_cylindrical_area_instance_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cylindrical_geometry_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_cylindrical_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_data_declaration_type - Static variable in class nxopen.uf.UFConstants
-
- UF_dataum_point_type - Static variable in class nxopen.uf.UFConstants
-
- UF_date_attribute_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_datum_area_instance_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_datum_axis_type - Static variable in class nxopen.uf.UFConstants
-
- UF_datum_identifier_instance_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_datum_line_instance_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_datum_object_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_datum_plane_type - Static variable in class nxopen.uf.UFConstants
-
- UF_datum_point_instance_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_datum_reference_frame_type - Static variable in class nxopen.uf.UFConstants
-
- UF_DDAO_NOT_DDAO_OBJECT - Static variable in class nxopen.uf.UFConstants
-
- UF_DDAO_OBJECT_CREATION_FAILED - Static variable in class nxopen.uf.UFConstants
-
- UF_DDAO_OBJECT_EDIT_FAILED - Static variable in class nxopen.uf.UFConstants
-
- UF_DDAO_OBJECT_INQUIRY_FAILED - Static variable in class nxopen.uf.UFConstants
-
- UF_DDAO_RESULT_INQUIRY_FAILED - Static variable in class nxopen.uf.UFConstants
-
- UF_DDAO_TARGET_INVALID - Static variable in class nxopen.uf.UFConstants
-
- UF_design_element_search_result_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_design_rule_function_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_design_rule_location_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_design_rule_override_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_design_rule_rule_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_design_rule_type - Static variable in class nxopen.uf.UFConstants
-
- UF_design_rule_violation_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_device_type - Static variable in class nxopen.uf.UFConstants
-
- UF_DFO_BAD_CONSTRAINTS_DATA - Static variable in class nxopen.uf.UFConstants
-
- UF_DFO_BAD_PARAMETERS - Static variable in class nxopen.uf.UFConstants
-
- UF_DFO_CANT_MOVE_FACES - Static variable in class nxopen.uf.UFConstants
-
- UF_DFO_CANT_RECREATE_BLEND - Static variable in class nxopen.uf.UFConstants
-
- UF_dim_angular_major_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_dim_angular_minor_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_dim_arc_length_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_dim_assorted_parts_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_dim_baseline_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_dim_chain_dimensions_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_dim_chain_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_dim_chamfer_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_dim_conc_circle_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_dim_cylindrical_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_dim_diameter_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_dim_folded_radius_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_dim_hole_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_dim_horizontal_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_dim_ordinate_horiz_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_dim_ordinate_origin_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_dim_ordinate_vert_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_dim_parallel_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_dim_perimeter_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_dim_perpendicular_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_dim_radius_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_dim_sub_arc_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_dim_sub_line_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_dim_sub_text_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_dim_vertical_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_dimension_set_type - Static variable in class nxopen.uf.UFConstants
-
- UF_dimension_type - Static variable in class nxopen.uf.UFConstants
-
- UF_directed_datum_ident_instance_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_direction_type - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_ALL_ACTIVE_MEMBER_VIEWS - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_ALL_ACTIVE_VIEWS - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_ALL_VIEWS_BUT_DRAWING - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_BACKGROUND_COLOR - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_CCM_EUCLIDEAN_DISTANCE - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_CONTOUR_LINES - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_DASHED_HIDDEN_FACE_EDGES - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_DISTANCE - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_err_angle_delta_gt_2pi - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_err_contour_lines_unsupported - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_err_could_not_compute_attention_point - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_err_end_ang_lt_start_ang - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_err_failed_to_create_image_file - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_err_invalid_expression - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_err_object_not_in_work_part - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_err_radius_less_than_systol - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_err_reflection_lines_unsupported - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_EXTRA_FINE - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_FACET_COLORMAP - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_FINE - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_FRINGE - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_GAUSSIAN_CURVATURE - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_HEDGEHOG - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_hls_model - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_hsv_model - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_INVISIBLE_HIDDEN_FACE_EDGES - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_MAX_CONTOUR_LINES - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_MAX_NAME_SIZE - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_MAX_REFLECTION_LINES - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_MAXIMUM_CURVATURE - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_MEAN_CURVATURE - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_MINIMUM_CURVATURE - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_NAME_DISPLAY_OFF - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_NAME_DISPLAY_ON - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_NAMES_IN_ALL_VIEWS - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_NAMES_IN_VIEW_OF_DEFN - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_NAMES_IN_WORK_VIEW - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_NO_SELECT_WORK_DIMMED - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_NORMAL_CURVATURE - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_REFL_HORIZ - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_REFL_HORIZ_AND_VERT - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_REFL_LINE_STYLE_MAX - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_REFL_LINE_STYLE_MIN - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_REFL_LINES - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_REFL_MEDIUM - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_REFL_REFLECTIVITY_MAX - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_REFL_REFLECTIVITY_MIN - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_REFL_ROTATE - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_REFL_ROTATE_ANGLE_MAX - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_REFL_ROTATE_ANGLE_MIN - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_REFL_THICK - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_REFL_THIN - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_REFL_TRANSLATE_HORIZ - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_REFL_TRANSLATE_MAX - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_REFL_TRANSLATE_MIN - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_REFL_TRANSLATE_VERT - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_REFL_TYPE_BLACKLINES - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_REFL_TYPE_BLKWHTLINES - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_REFL_TYPE_COLOREDLINES - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_REFL_TYPE_PHOTOHORIZON - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_REFL_TYPE_SCENE1 - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_REFL_TYPE_SCENE2 - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_REFL_TYPE_SCENE3 - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_REFL_TYPE_SCENE4 - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_REFL_TYPE_SCENE5 - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_REFL_TYPE_SCENE6 - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_REFL_TYPE_SCENE7 - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_REFL_TYPE_SCENE8 - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_REFL_TYPE_SCENE9 - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_REFL_TYPE_SIMHORIZON - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_REFL_TYPE_SPHEREROOM - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_REFL_TYPE_USERIMAGE - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_REFL_VERT - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_REFLECTION - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_rgb_model - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_SECTIONAL_CURVATURE - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_SELECT_WORK_DIMMED - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_SHADED_COARSE - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_SHADED_CUSTOMIZE_TOL - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_SHADED_EXTRA_FINE - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_SHADED_FINE - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_SHADED_FINENESS_MAX - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_SHADED_FINENESS_MIN - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_SHADED_STANDARD - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_SHADED_ULTRA_FINE - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_SLOPE - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_SRFANL_BLEND - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_SRFANL_DISCOLOR_3 - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_SRFANL_DISCOLOR_5 - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_SRFANL_DISCOLOR_7 - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_SRFANL_DISCOLOR_OPTION_MAX - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_SRFANL_DISCOLOR_OPTION_MIN - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_SRFANL_DISPLAY_TYPE_MAX - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_SRFANL_DISPLAY_TYPE_MIN - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_SRFANL_DISTYPE_OPTION_MAX - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_SRFANL_DISTYPE_OPTION_MIN - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_SRFANL_FINENESS_MAX - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_SRFANL_FINENESS_MIN - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_SRFANL_SCALAR_FUNC_MAX - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_SRFANL_SCALAR_FUNC_MIN - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_SRFANL_SHARP - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_STANDARD - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_SUPPRESS_DISPLAY - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_U_CURVATURE - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_ULTRA_FINE - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_UNSUPPRESS_DISPLAY - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_USE_BACKGROUND_COLOR - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_USE_ORIGINAL_COLOR - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_USE_SPECIFIED_COLOR - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_USE_SYSTEM_COLOR - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_V_CURVATURE - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_VIEW_OF_LAST_CURSOR - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_WORK_PLANE_EMPHASIS_OFF - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_WORK_PLANE_EMPHASIS_ON - Static variable in class nxopen.uf.UFConstants
-
- UF_DISP_WORK_VIEW_ONLY - Static variable in class nxopen.uf.UFConstants
-
- UF_display_object_type - Static variable in class nxopen.uf.UFConstants
-
- UF_displayed_constraint_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_displayed_pattern_definition_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_distance_constraint_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_DPUD_FUN_NOT_AVAIL - Static variable in class nxopen.uf.UFConstants
-
- UF_DPUD_PROJ_NOT_CONSTANT - Static variable in class nxopen.uf.UFConstants
-
- UF_DPUD_TAXIS_NOT_CONSTANT - Static variable in class nxopen.uf.UFConstants
-
- UF_draft_analysis_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_draft_area_fill_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_draft_arrow_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_draft_assorted_parts_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_draft_block_cntrln_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_draft_callout_type - Static variable in class nxopen.uf.UFConstants
-
- UF_draft_cntrline_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_draft_crosshatch_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_draft_cutting_plane_symbol_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_draft_cyl_cntrln_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_draft_facet_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_draft_fpt_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_draft_frame_bar_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_draft_full_blt_circle_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_draft_full_cir_cntrln_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_draft_id_symbol_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_draft_intersection_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_draft_label_on_parent_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_draft_label_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_draft_linear_cntrln_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_draft_note_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_draft_offset_cntrpt_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_draft_part_blt_circle_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_draft_part_cir_cntrln_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_draft_point_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_draft_solid_fill_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_draft_sym_cntrln_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_draft_target_point_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_draft_title_block_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_draft_user_defined_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_drafting_body_type - Static variable in class nxopen.uf.UFConstants
-
- UF_drafting_break_type - Static variable in class nxopen.uf.UFConstants
-
- UF_drafting_direction_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_drafting_entity_type - Static variable in class nxopen.uf.UFConstants
-
- UF_drafting_image_type - Static variable in class nxopen.uf.UFConstants
-
- UF_drafting_region_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_drafting_search_criteria_type - Static variable in class nxopen.uf.UFConstants
-
- UF_drafting_search_type - Static variable in class nxopen.uf.UFConstants
-
- UF_drafting_supplemental_geometry_type - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_associative_views - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_bad_arrow_dist_past_part - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_bad_arrow_head_control - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_bad_arrow_head_type - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_bad_arrow_incl_angle - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_bad_arrow_len - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_bad_arrow_size - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_bad_arrow_stub_len - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_bad_num_leg1_sxsegs - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_bad_num_step_sxsegs - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_bad_num_sxsegs - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_bad_sxline_display - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_bad_sxview_scale - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_boundary_not_smart - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_cannot_assoc_object - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_CURVE_HLP_ATTR - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_CURVE_HLR_ATTR - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_curve_is_associative - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_design_in_context - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_drawing_already_exists - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_DRAWING_VIEW - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_dwg_is_displayed - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_dwg_not_current - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_ERROR_BASE - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_ERROR_RANGE - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_invalid_anchor_point - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_invalid_arrow_dir - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_invalid_assoc_modifier - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_invalid_boundary_curves - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_invalid_drawing_name - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_invalid_drawing_size_values - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_invalid_dwg_pos - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_invalid_hinge_dir - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_invalid_note - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_invalid_number_of_copies - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_invalid_object_assoc - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_invalid_object_view - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_invalid_parameter - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_invalid_parameter_value - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_invalid_pen_number - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_invalid_pen_option - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_invalid_plot_scale - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_invalid_size_code_value - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_invalid_spline - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_invalid_step_dir - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_invalid_sxline_leg - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_invalid_sxseg_type - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_invalid_tabnot_cell - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_invalid_units_value - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_invalid_view - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_invalid_view_bound_type - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_invalid_view_type - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_MAX_LABEL_LEN - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_MAX_LETTER_LEN - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_MAX_NUM_STEP_SXSEGS - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_MAX_NUM_SXSEGS - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_MODELING_VIEW - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_no_add_to_half_sxline - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_no_arc_center - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_no_current_drawing - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_no_cut_in_leg1 - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_no_cut_in_leg2 - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_no_delete_half_sxline - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_no_drawing_view - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_no_dwg_of_dwg_view - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_no_end_point - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_NO_ERRORS - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_no_intersection - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_no_more_tabnot_fonts - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_no_more_tabnot_sizes - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_no_more_views_to_dwg - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_no_view_created - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_not_two_cuts_defined - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_null_object - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_NUM_VIEW_PARMS - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_object_is_not_linear - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_object_is_view_dep - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_parameter_type_wrong - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_parent_view_out_of_date - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_part_not_loaded - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_point_not_on_drawing - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_point_not_smart - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_point_not_visible - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_pview_not_detail_view - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_pview_not_dwg_view - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_pview_not_sxview - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_SECTION_ATTR - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_sketch_object - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_sxline_not_correct_type - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_TABNOTE_COL_NONE - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_TABNOTE_FIRST_COL - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_TABNOTE_FIRST_ROW - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_TABNOTE_LAST_COL - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_TABNOTE_LAST_ROW - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_TABNOTE_ROW_NONE - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_tag_is_null - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_tag_not_drawing - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_tag_not_sxedge - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_tag_not_sxline - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_tag_not_sxseg - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_tag_not_sxsolid - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_tag_not_sxview - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_tag_not_view - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_tag_not_view_label - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_unable_to_delete_view - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_unable_to_edit_bnd_point - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_unable_to_obtain_display_data - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_unable_to_rotate_view - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_unable_to_set_ref_pt - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_unable_to_simplify_curve - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_unrecoverable_error - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_vb_curve_crosses_curve - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_vb_curve_disconnected - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_vb_curve_self_intersects - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_vb_no_curve - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_vb_non_manifold_curve - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_view_already_exists - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_view_cannot_be_made_ref - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_view_indep_object - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_view_is_expanded - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_view_is_facet_view - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_view_is_not_active - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_view_is_not_member_view - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_view_not_on_current_drawing - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_view_not_on_drawing - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_view_pos_not_on_drawing - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_vw_scale_is_not_parametric - Static variable in class nxopen.uf.UFConstants
-
- UF_DRAW_WARNING - Static variable in class nxopen.uf.UFConstants
-
- UF_drawing_template_region_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_drawing_template_region_type - Static variable in class nxopen.uf.UFConstants
-
- UF_drawing_type - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_arc_is_not_in_same_view - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_BAD_SYMBOL_TEXT_OBJECT - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_CANNOT_ATTACH_CANT_FIND_NORMAL - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_CANNOT_ATTACH_TO_DIM_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_CANNOT_ATTACH_TO_DISASSOC_DMV_FACET_REP - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_CANNOT_ATTACH_TO_LEADER_WITHOUT_ARROWS - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_CANNOT_ATTACH_TO_NON_FACE - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_CANNOT_ATTACH_TO_NON_LINEAR - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_CANNOT_ATTACH_TO_OBJ_IN_DIFF_VIEW - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_CANNOT_ATTACH_TO_OCC - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_CANNOT_ATTACH_TO_RETAINED_ANNOT - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_CANNOT_ATTACH_TO_VIEW_LABEL - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_CANNOT_ATTACH_TO_WELD_SYMBOL - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_CANNOT_CHANGE_LEADER_POS_PARAM - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_cannot_close_xhatch_file - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_CANNOT_PROCESS_SYMBOL_FONT - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_CANT_REMOVE_LAST_LEADER - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_center_point - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_CLINE_ALL_POINTS_NOT_COLLINEAR - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_CLINE_ANGLE_OUT_OF_RANGE - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_CLINE_AUTO_INVALID_CYL_EXTENSION - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_CLINE_AUTO_INVALID_VIEW - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_CLINE_AUTO_NO_VIEWS - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_CLINE_DUPLICATE_POINTS_SELECTED - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_CLINE_INCORRECT_NUM_ASSOC_OBJECTS - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_CLINE_INSUFFICIENT_INPUT - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_CLINE_INVALID_EXTENSION - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_CLINE_INVALID_INPUT - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_CLINE_INVALID_INTERSECTION - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_CLINE_INVALID_OBJECT - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_CLINE_INVALID_OFFSET_DISTANCE - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_CLINE_INVALID_OFFSET_OBJECT - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_CLINE_INVALID_RADIUS - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_CLINE_MEMORY_ALLOCATION_ERROR - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_CLINE_NON_COLLINEAR_POINTS - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_CLINE_POINTS_COLLINEAR - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_CLINE_POINTS_COMPUTATION_FAILURE - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_CLINE_RETAINED_HANDLE_FOUND - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_CLINE_UNABLE_TO_CREATE_ERROR - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_CLINE_UNEQUAL_RADIUS - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_CMP_DWG_DIFF_FOUND - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_CMP_DWG_DIFF_NOT_PERFORMED - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_COINCIDENT_ANCHOR_ORIENTATION_PT - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_coincident_points - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_collinear_points - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_CONFLICT_BASIC_TOL_AND_INSPECTION_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_CONFLICT_REF_TOL_AND_REF_SYMBOL_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_crosshatch_file_not_found - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_cyl_dim_with_2_margins - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_DECIMAL_PLACES_MAX - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_DEFAULT_TEXT_OUT_OF_BOUNDS - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_DIAMETER_RADIUS_SYMBOL_MAX_LENGTH - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_DIM_HAS_NO_EXT_LINES - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_dim_not_drawing_object - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_drawing_is_active - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_ERROR_BASE - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_error_in_k25h7pa - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_ERROR_OPENING_CURRENT_SBF_FILE - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_ERROR_RANGE - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_FILENAME_EXISTS - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_first_end_point - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_first_object_is_a_point - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_form_requires_1_object - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_form_requires_2_objects - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_form_requires_3_or_more_objects - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_GDT_REQUIRED_FOR_LEADER_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_HAS_NO_LEADER_POS_PARAM - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INFINITE_RADIUS - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INTERMEDIATE_PTS_NOT_ALLOWED - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_ALIGN_POSITION - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_ALL_AROUND_SYMBOL_SIZE - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_ANCHOR_POINT_OBJECT - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_invalid_ang_dim_form - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_APPEARANCE_SLANT_ANGLE - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_APPENDED_TEXT_ASPECT_RATIO - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_APPENDED_TEXT_CHARACTER_SPACE_FACTOR - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_APPENDED_TEXT_LINE_SPACE_FACTOR - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_APPENDED_TEXT_SIZE - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_AREA_FILL_MATERIAL - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_AREA_FILL_SCALE - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_ARROW_DISPLAY - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_ARROW_FILL_STATUS - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_ARROW_OUT_LENGTH_FACTOR - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_ARROW_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_ARROWHEAD_LENGTH - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_ASSOCIATED_OBJECT - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_invalid_centerline_form - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_CHAMFER_DIMENSION - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_CHAMFER_DIMENSION_FORM - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_CHAMFER_DIMENSION_LEADER_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_CHAMFER_DIMENSION_SPACE_FACTOR - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_CHAMFER_DIMENSION_STUB_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_CHAMFER_DIMENSION_SYMBOL_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_CHAMFER_DIMENSION_SYMBOL_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_invalid_circular_dim_form - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_CMP_DWG_BASELINE - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_CMP_DWG_PLOT_OPTIONS - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_COLOR - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_COLUMN - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_CROSSHATCH_FILE_FORMAT - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_CUSTOM_SYMBOL_PIECE - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_DATUM_LENGTH_PAST_ARROW - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_DATUM_TARGET_INDEX - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_DATUM_TARGET_LABEL - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_DECIMAL_POINT_CHARACTER - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_DETAIL_LEVEL_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_DIAM_RADIUS_PLACEMENT - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_DIAMETER_SYMBOL_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_DIM_APP_TEXT_SPACE_FACTOR - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_DIM_DIM_LINE_SPACE_FACTOR - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_DIM_INSPECTION_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_DIM_REFERENCE_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_DIM_TOL_TEXT_SPACE_FACTOR - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_DIM_TYPE_FOR_OPERATION - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_DIMENSION_ANGULAR_FORMAT - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_DIMENSION_ANGULAR_FORMAT_TOLERANCE - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_DIMENSION_ANGULAR_SUPPRESS_ZEROS - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_DIMENSION_ORIENTATION - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_DIMENSION_TEXT_ASPECT_RATIO - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_DIMENSION_TEXT_CHARACTER_SPACE_FACTOR - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_DIMENSION_TEXT_LINE_SPACE_FACTOR - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_DIMENSION_TEXT_SIZE - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_DIMENSION_TOL_PLACEMENT - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_DOGLEG_ANGLE - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_DOGLEG_END_OFFSET - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_DOGLEG_END_OFFSET_ZERO - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_DOGLEG_START_OFFSET - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_DOT_DIAMETER - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_DUAL_DIMENSION_FORMAT - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_DUAL_DIMENSION_UNITS - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_DUAL_FRACTION_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_EXTENSION_LINE_DISPLAY - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_FABRICATION_NUMBER - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_FACE_ORIENTATION - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_FIRST_POS_TO_EXTENSION_LINE_DISTANCE - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_invalid_fold_location - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_FOLDER_INPUT - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_FONT - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_FONT_STYLE - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_FRACTION_DENOMINATOR - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_invalid_frame_corner - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_GDT_FRAME_FACTOR - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_GENERAL_TEXT_ASPECT_RATIO - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_GENERAL_TEXT_CHARACTER_SPACE_FACTOR - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_GENERAL_TEXT_LINE_SPACE_FACTOR - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_GENERAL_TEXT_SIZE - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_HATCH_DISTANCE - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_HATCH_TOLERANCE - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_HORIZ_TEXT_JUST - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_ID_SYMBOL - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_invalid_id_symbol_type - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_INHERIT_TAG - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_INTEGER_INPUT - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_invalid_leader_attach_type - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_LEADER_LOCATION - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_invalid_leader_mode - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_invalid_leader_type - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_invalid_line_assoc_type - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_LINE_PAST_ARROW_DISTANCE - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_invalid_linear_dim_form - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_LINEAR_FRACTION_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_LINEAR_UNITS - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_NARROW_DIMENSION_DISPLAY_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_NARROW_DIMENSION_LEADER_ANGLE - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_NARROW_DIMENSION_TEXT_ORIENTATION - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_NOTE_TITLE - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_invalid_number_of_bounds - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_NUMBER_OF_DECIMAL_PLACES - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_NUMBER_OF_FEATURES - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_invalid_number_of_objects - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_NUMBER_OF_VIEWS - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_OBJ_FOR_ASSORTED_PARTS - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_invalid_object - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_invalid_object1 - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_invalid_object1_assoc_type - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_invalid_object1_modifier - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_invalid_object2 - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_invalid_object2_assoc_type - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_invalid_object2_modifier - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_invalid_object_assoc_type - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_invalid_object_modifier - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_invalid_object_type_center_point - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_invalid_object_type_centerline - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_invalid_object_type_offset_point - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_invalid_object_view_id - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_OFFSET_CURVES - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_ORDINATE_MARGIN_NUMBER - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_ORDINATE_MARGIN_SPACING - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_invalid_origin - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_invalid_parameter - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_invalid_parameter_value - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_PINLIST_FILTER - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_RADIUS_SYMBOL_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_REAL_INPUT - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_ROW - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_SECOND_POS_TO_EXTENSION_LINE_DISTANCE - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_STACK_HORIZONTAL_ALIGNMENT - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_STACK_SPACE_FACTOR - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_STACK_VERTICAL_ALIGNMENT - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_STOCK_LENGTH_VALUE - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_STRING_INPUT - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_STUB_LENGTH - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_SYMBOL_FONT_OBJECTS - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_SYMBOL_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_SYMBOL_TO_DIMENSION_TEXT_DISTANCE - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_SYMBOL_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_TEXT - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_TEXT_ARROW_PLACEMENT - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_TEXT_OVER_LEADER_GAP_FACTOR - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_TEXT_OVER_STUB_FACTOR - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_TEXT_PLACEMENT - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_TEXT_TO_LINE_DISTANCE - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_TOLERANCE_TEXT_ASPECT_RATIO - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_TOLERANCE_TEXT_CHARACTER_SPACE_FACTOR - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_TOLERANCE_TEXT_LINE_SPACE_FACTOR - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_TOLERANCE_TEXT_SIZE - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_TOLERANCE_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_TRIM_DIM_LINE_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_TRUE_LENGTH_TEXT_POSITION - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_invalid_view - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_WELD_LINE_GAP - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_WELD_SPACE_FACTOR - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_WELD_SYMBOL_SIZE_FACTOR - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_WELD_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_INVALID_WIDTH - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_last_end_point - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_LEADER_HAS_NO_CONNECTION - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_LEADER_IS_REQD - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_LEADER_MAX_INT_POINTS - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_LEADER_MAX_LEADERS - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_LEADER_REQUIRED - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_LIMIT_FIT_INVALID_DEVIATION - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_LIMIT_FIT_INVALID_DISPLAY_STYLE - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_LIMIT_FIT_INVALID_GRADE - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_LIMIT_FIT_INVALID_HOLE_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_LIMIT_FIT_INVALID_PAREN_STYLE - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_LIMIT_FIT_INVALID_TOL_ALIGNMENT - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_material_definition_not_found - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_MAX_FONT_LEN - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_MAX_HATCH_FILE_NAME_LEN - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_MAX_HATCH_MATERIAL_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_MAX_HATCH_MATERIAL_NAME_BUFSIZE - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_MAX_HATCH_MATERIAL_NAME_NCHARS - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_MIN_NEW_WIDTH - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_model_objects_on_drawing - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_MORE_THAN_7_LEADERS - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_MULTIPLE_PLISTS_NOT_ALLOWED - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_no_boundary - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_no_boundary_members - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_NO_ERRORS - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_no_margin_to_convert - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_no_objects - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_NO_SBF_FILE_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_NO_TEMPLATE_ENV_VAR - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_no_text - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_no_text_found - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_NO_VALID_COMPONENT_FOUND - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_not_a_centerline - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_NOT_A_CUSTOM_SYMBOL - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_not_a_cylindrical_dim - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_not_a_dimension - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_not_a_folded_radius_dim - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_not_a_gdt_symbol - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_not_a_id_symbol - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_not_a_label - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_not_a_ordinate_margin - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_not_an_ordinate_origin - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_NOT_DRAFTING_OBJECT - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_NOT_VALID_FOR_GB_DAT_DIM - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_NOT_VALID_GDT_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_NOT_VALID_LEADER_ATTACH_OBJ - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_null_object - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_null_object1 - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_null_object1_structure - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_null_object2 - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_null_object2_structure - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_null_object_structure - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_object_is_not_a_line - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_OBJECT_IS_NOT_A_WELD_SYMBOL - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_OBJECTS_ARE_NOT_CONSTANT - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_objects_not_in_same_view - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_off_distance - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_off_position - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_offset_center_point_requires_arc - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_OFFSET_INVALID_ARC - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_OFFSET_INVALID_DISTANCE - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_OFFSET_INVALID_OBJECT - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_ORIGIN_TYPE_UNSUPPORTED - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_point_coincident_with_center - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_point_not_on_centerline - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_REFILE_PART_FAILURE - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_RETAINED_COLOR_ORIGINAL - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_RETAINED_FONT_ORIGINAL - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_RETAINED_WIDTH_ORIGINAL - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_SYM_INSUFFICIENT_ASSOC_OBJECTS - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_SYM_INVALID_INTERSECTION - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_SYMBOL_INVALID_SYMBOL_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_SYMBOL_IS_ALREADY_IN_EDIT - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_SYMBOL_NAME_DOES_NOT_EXIST - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_SYMBOL_NAME_EXISTS - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_SYMBOL_SELECTED_DIFFERENT_SYMBOLS - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_SYMBOL_UNSUPPORTED_SKETCH - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_tag_is_null - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_TEMPLATE_ALREADY_LOADED - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_TEMPLATE_NAME_NOT_FOUND - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_TEMPLATE_WONT_LOAD - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_thru_3_points - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_too_many_boundaries - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_too_many_characters_in_line - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_too_many_characters_in_text - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_TOO_MANY_LEADERS - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_too_many_objects - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_two_points_in_a_row - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_ud_symbol_data_not_found - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_unable_to_create_crosshatching - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_UNITS_INVALID_CELL_SLANT_ANGLE - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_UNITS_INVALID_NUMERATOR_AGGERGATE - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_UNITS_INVALID_NUMERATOR_DEGREE - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_UNITS_INVALID_NUMERATOR_FRACTION - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_UNITS_INVALID_NUMERATOR_MINUTES - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_UNITS_INVALID_NUMERATOR_SECONDS - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_unknown_error - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_unrecoverable_error - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_UNSUPPORTED_CHARACTER_INPUT - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_UPDATE_ALL - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_UPDATE_AUTO - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_UPDATE_FORCE - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_UPDATE_NAMED - Static variable in class nxopen.uf.UFConstants
-
- UF_DRF_WARNING - Static variable in class nxopen.uf.UFConstants
-
- UF_drill_geom_featr_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_dropped_curve_group_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_dropped_edge_group_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_dummy_type - Static variable in class nxopen.uf.UFConstants
-
- UF_dynamic_deviation_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_dynamic_section_body_cut_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_dynamic_section_component_cut_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_dynamic_section_cut_subtype_any - Static variable in class nxopen.uf.UFConstants
-
- UF_dynamic_section_cut_type - Static variable in class nxopen.uf.UFConstants
-
- UF_edge_0_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_edge_3_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_edge_type - Static variable in class nxopen.uf.UFConstants
-
- UF_engineering_symbol_type - Static variable in class nxopen.uf.UFConstants
-
- UF_engineering_text_type - Static variable in class nxopen.uf.UFConstants
-
- UF_EPLIB_TABLE_LOADED_ALL - Static variable in class nxopen.uf.UFConstants
-
- UF_EPLIB_TABLE_LOADED_HEADER - Static variable in class nxopen.uf.UFConstants
-
- UF_EPLIB_TABLE_LOADED_NONE - Static variable in class nxopen.uf.UFConstants
-
- UF_EPLIB_TYPE_EXTERNAL - Static variable in class nxopen.uf.UFConstants
-
- UF_EPLIB_TYPE_FILE_SELECT - Static variable in class nxopen.uf.UFConstants
-
- UF_EPLIB_TYPE_VIEW - Static variable in class nxopen.uf.UFConstants
-
- UF_equal_radius_constraint_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_err_attr_ann_text_found - Static variable in class nxopen.uf.UFConstants
-
- UF_err_attr_duplicate_title - Static variable in class nxopen.uf.UFConstants
-
- UF_err_attr_insufficient_privilege - Static variable in class nxopen.uf.UFConstants
-
- UF_err_attr_is_locked - Static variable in class nxopen.uf.UFConstants
-
- UF_err_attr_is_referenced - Static variable in class nxopen.uf.UFConstants
-
- UF_err_attr_is_reserved - Static variable in class nxopen.uf.UFConstants
-
- UF_err_attr_not_found - Static variable in class nxopen.uf.UFConstants
-
- UF_err_attr_title_too_big - Static variable in class nxopen.uf.UFConstants
-
- UF_err_attr_value_too_big - Static variable in class nxopen.uf.UFConstants
-
- UF_err_bad_parameter_number_1 - Static variable in class nxopen.uf.UFConstants
-
- UF_err_bad_parameter_number_10 - Static variable in class nxopen.uf.UFConstants
-
- UF_err_bad_parameter_number_11 - Static variable in class nxopen.uf.UFConstants
-
- UF_err_bad_parameter_number_12 - Static variable in class nxopen.uf.UFConstants
-
- UF_err_bad_parameter_number_13 - Static variable in class nxopen.uf.UFConstants
-
- UF_err_bad_parameter_number_2 - Static variable in class nxopen.uf.UFConstants
-
- UF_err_bad_parameter_number_3 - Static variable in class nxopen.uf.UFConstants
-
- UF_err_bad_parameter_number_4 - Static variable in class nxopen.uf.UFConstants
-
- UF_err_bad_parameter_number_5 - Static variable in class nxopen.uf.UFConstants
-
- UF_err_bad_parameter_number_6 - Static variable in class nxopen.uf.UFConstants
-
- UF_err_bad_parameter_number_7 - Static variable in class nxopen.uf.UFConstants
-
- UF_err_bad_parameter_number_8 - Static variable in class nxopen.uf.UFConstants
-
- UF_err_bad_parameter_number_9 - Static variable in class nxopen.uf.UFConstants
-
- UF_err_can_not_get_printerdc - Static variable in class nxopen.uf.UFConstants
-
- UF_err_cant_execute_for_lock_table_content - Static variable in class nxopen.uf.UFConstants
-
- UF_err_cant_execute_for_lock_table_format - Static variable in class nxopen.uf.UFConstants
-
- UF_err_cant_exit_run_dialog - Static variable in class nxopen.uf.UFConstants
-
- UF_err_cant_free_license - Static variable in class nxopen.uf.UFConstants
-
- UF_err_cant_init_after_term - Static variable in class nxopen.uf.UFConstants
-
- UF_err_failure_umg_setting - Static variable in class nxopen.uf.UFConstants
-
- UF_err_file_does_not_exist - Static variable in class nxopen.uf.UFConstants
-
- UF_err_grip_calling_ufun_counts_dont_agree - Static variable in class nxopen.uf.UFConstants
-
- UF_err_grip_calling_ufun_illegal_use - Static variable in class nxopen.uf.UFConstants
-
- UF_err_grip_calling_ufun_sizes_dont_agree - Static variable in class nxopen.uf.UFConstants
-
- UF_err_grip_calling_ufun_types_dont_agree - Static variable in class nxopen.uf.UFConstants
-
- UF_err_input_is_null - Static variable in class nxopen.uf.UFConstants
-
- UF_err_input_not_locale - Static variable in class nxopen.uf.UFConstants
-
- UF_err_input_not_utf8 - Static variable in class nxopen.uf.UFConstants
-
- UF_err_invalid_display_part - Static variable in class nxopen.uf.UFConstants
-
- UF_err_invalid_filename - Static variable in class nxopen.uf.UFConstants
-
- UF_err_invalid_function_type - Static variable in class nxopen.uf.UFConstants
-
- UF_err_invalid_library - Static variable in class nxopen.uf.UFConstants
-
- UF_err_invalid_update_option - Static variable in class nxopen.uf.UFConstants
-
- UF_err_license_not_available - Static variable in class nxopen.uf.UFConstants
-
- UF_err_mc_not_inited - Static variable in class nxopen.uf.UFConstants
-
- UF_err_no_control_permission - Static variable in class nxopen.uf.UFConstants
-
- UF_err_no_memory - Static variable in class nxopen.uf.UFConstants
-
- UF_err_no_symbol - Static variable in class nxopen.uf.UFConstants
-
- UF_err_no_work_part - Static variable in class nxopen.uf.UFConstants
-
- UF_err_not_callable_in_internal - Static variable in class nxopen.uf.UFConstants
-
- UF_err_not_in_work_part - Static variable in class nxopen.uf.UFConstants
-
- UF_err_not_supported_this_platform - Static variable in class nxopen.uf.UFConstants
-
- UF_err_object_not_smart - Static variable in class nxopen.uf.UFConstants
-
- UF_err_operation_aborted - Static variable in class nxopen.uf.UFConstants
-
- UF_err_part_not_fully_loaded - Static variable in class nxopen.uf.UFConstants
-
- UF_err_part_not_loaded - Static variable in class nxopen.uf.UFConstants
-
- UF_err_program_not_initialized - Static variable in class nxopen.uf.UFConstants
-
- UF_err_query_udobj_class_id_not_allowed - Static variable in class nxopen.uf.UFConstants
-
- UF_err_redefine_link_without_file - Static variable in class nxopen.uf.UFConstants
-
- UF_err_text_not_ascii - Static variable in class nxopen.uf.UFConstants
-
- UF_err_ugmanager_not_active - Static variable in class nxopen.uf.UFConstants
-
- UF_err_unexpected_load_error - Static variable in class nxopen.uf.UFConstants
-
- UF_err_update_link_with_file - Static variable in class nxopen.uf.UFConstants
-
- UF_EXP_NOT_SUPPORTED - Static variable in class nxopen.uf.UFConstants
-
- UF_explosion_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_extended_displayable_type - Static variable in class nxopen.uf.UFConstants
-
- UF_extended_type - Static variable in class nxopen.uf.UFConstants
-
- UF_extracted_sketch_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_face_curvature_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_face_type - Static variable in class nxopen.uf.UFConstants
-
- UF_faceset_type - Static variable in class nxopen.uf.UFConstants
-
- UF_FACET_CONVEXITY_NOT_DETERMINED - Static variable in class nxopen.uf.UFConstants
-
- UF_FACET_DRAW_INTERIOR - Static variable in class nxopen.uf.UFConstants
-
- UF_FACET_DRAW_SILHOUETTE - Static variable in class nxopen.uf.UFConstants
-
- UF_FACET_DRAW_WIRE - Static variable in class nxopen.uf.UFConstants
-
- UF_FACET_err_bad_adjacency - Static variable in class nxopen.uf.UFConstants
-
- UF_FACET_err_bad_nx_curve_data - Static variable in class nxopen.uf.UFConstants
-
- UF_FACET_err_body_not_alive - Static variable in class nxopen.uf.UFConstants
-
- UF_FACET_err_cannot_edit_occurrence - Static variable in class nxopen.uf.UFConstants
-
- UF_FACET_err_edge_not_found - Static variable in class nxopen.uf.UFConstants
-
- UF_FACET_err_facet_not_planar - Static variable in class nxopen.uf.UFConstants
-
- UF_FACET_err_insufficient_vertices - Static variable in class nxopen.uf.UFConstants
-
- UF_FACET_err_invalid_curve_ang_tol - Static variable in class nxopen.uf.UFConstants
-
- UF_FACET_err_invalid_curve_dist_tol - Static variable in class nxopen.uf.UFConstants
-
- UF_FACET_err_invalid_curve_max_len - Static variable in class nxopen.uf.UFConstants
-
- UF_FACET_err_invalid_edge_id - Static variable in class nxopen.uf.UFConstants
-
- UF_FACET_err_invalid_face_id - Static variable in class nxopen.uf.UFConstants
-
- UF_FACET_err_invalid_face_tag - Static variable in class nxopen.uf.UFConstants
-
- UF_FACET_err_invalid_facet_id - Static variable in class nxopen.uf.UFConstants
-
- UF_FACET_err_invalid_facet_width - Static variable in class nxopen.uf.UFConstants
-
- UF_FACET_err_invalid_model - Static variable in class nxopen.uf.UFConstants
-
- UF_FACET_err_invalid_num_sides - Static variable in class nxopen.uf.UFConstants
-
- UF_FACET_err_invalid_surf_ang_tol - Static variable in class nxopen.uf.UFConstants
-
- UF_FACET_err_invalid_surf_dist_tol - Static variable in class nxopen.uf.UFConstants
-
- UF_FACET_err_invalid_version_number - Static variable in class nxopen.uf.UFConstants
-
- UF_FACET_err_invalid_vertex_id - Static variable in class nxopen.uf.UFConstants
-
- UF_FACET_err_non_manifold - Static variable in class nxopen.uf.UFConstants
-
- UF_FACET_err_not_a_vrml_file - Static variable in class nxopen.uf.UFConstants
-
- UF_FACET_err_not_an_stl_file - Static variable in class nxopen.uf.UFConstants
-
- UF_FACET_err_not_solid_body_or_face - Static variable in class nxopen.uf.UFConstants
-
- UF_FACET_err_object_not_supported - Static variable in class nxopen.uf.UFConstants
-
- UF_FACET_err_precise_data_not_avail - Static variable in class nxopen.uf.UFConstants
-
- UF_FACET_err_solid_not_available - Static variable in class nxopen.uf.UFConstants
-
- UF_FACET_err_solid_not_loaded - Static variable in class nxopen.uf.UFConstants
-
- UF_FACET_err_stl_invalid_data - Static variable in class nxopen.uf.UFConstants
-
- UF_FACET_err_stl_parse_fail - Static variable in class nxopen.uf.UFConstants
-
- UF_FACET_err_unknown_vrml_version - Static variable in class nxopen.uf.UFConstants
-
- UF_FACET_err_vrml_file_not_found - Static variable in class nxopen.uf.UFConstants
-
- UF_FACET_err_vrml_gunzip_fail - Static variable in class nxopen.uf.UFConstants
-
- UF_FACET_err_vrml_parser_fail - Static variable in class nxopen.uf.UFConstants
-
- UF_FACET_err_zero_facets_produced - Static variable in class nxopen.uf.UFConstants
-
- UF_FACET_ERROR_BASE - Static variable in class nxopen.uf.UFConstants
-
- UF_FACET_IS_CONCAVE - Static variable in class nxopen.uf.UFConstants
-
- UF_FACET_IS_CONVEX - Static variable in class nxopen.uf.UFConstants
-
- UF_FACET_NULL_EDGE_ID - Static variable in class nxopen.uf.UFConstants
-
- UF_FACET_NULL_FACE_ID - Static variable in class nxopen.uf.UFConstants
-
- UF_FACET_NULL_FACET_ID - Static variable in class nxopen.uf.UFConstants
-
- UF_FACET_PARAM_VERSION_CURR - Static variable in class nxopen.uf.UFConstants
-
- UF_FACET_TYPE_DOUBLE - Static variable in class nxopen.uf.UFConstants
-
- UF_FACET_TYPE_FLOAT - Static variable in class nxopen.uf.UFConstants
-
- UF_faceted_model_cloud_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_faceted_model_data_type - Static variable in class nxopen.uf.UFConstants
-
- UF_faceted_model_edge_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_faceted_model_face_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_faceted_model_jt_body_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_faceted_model_map_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_faceted_model_normal_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_faceted_model_promoted_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_faceted_model_type - Static variable in class nxopen.uf.UFConstants
-
- UF_fam_attr_density_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_fam_attr_double_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_fam_attr_exp_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_fam_attr_feature_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_fam_attr_instance_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_fam_attr_integer_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_fam_attr_mass_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_fam_attr_material_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_fam_attr_mirror_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_fam_attr_name_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_fam_attr_numeric_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_fam_attr_part_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_fam_attr_string_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_fam_attr_text_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_fam_attr_type - Static variable in class nxopen.uf.UFConstants
-
- UF_fam_part_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_fam_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_fam_type - Static variable in class nxopen.uf.UFConstants
-
- UF_fatigue_type - Static variable in class nxopen.uf.UFConstants
-
- UF_fbm_geom_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_feature_cache_type - Static variable in class nxopen.uf.UFConstants
-
- UF_feature_container_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_feature_control_frame_type - Static variable in class nxopen.uf.UFConstants
-
- UF_feature_instance_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_feature_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_feature_type - Static variable in class nxopen.uf.UFConstants
-
- UF_fillet_surface_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_filter_type - Static variable in class nxopen.uf.UFConstants
-
- UF_fixed_constraint_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_flange_0_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_flange_1_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_flange_type - Static variable in class nxopen.uf.UFConstants
-
- UF_flat_pattern_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_flat_pattern_type - Static variable in class nxopen.uf.UFConstants
-
- UF_flat_pattern_user_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_flatness_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_FLTR_ERR_AUTO_NAME_CLASH - Static variable in class nxopen.uf.UFConstants
-
- UF_FLTR_ERR_INVALID_FILTER - Static variable in class nxopen.uf.UFConstants
-
- UF_FLTR_ERR_NULL_CHAR - Static variable in class nxopen.uf.UFConstants
-
- UF_FLTR_ERR_NULL_FLTR_TAG - Static variable in class nxopen.uf.UFConstants
-
- UF_FLTR_ERR_NULL_OBJ_TAG - Static variable in class nxopen.uf.UFConstants
-
- UF_FLTR_ERR_NULL_PART - Static variable in class nxopen.uf.UFConstants
-
- UF_FLTR_ERR_NULL_ZONE_TAG - Static variable in class nxopen.uf.UFConstants
-
- UF_FLTR_OK - Static variable in class nxopen.uf.UFConstants
-
- UF_fmbd_annotation_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_fmbd_cut_sheet_cell_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_fmbd_cut_sheet_column_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_fmbd_cut_sheet_header_row_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_fmbd_cut_sheet_row_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_fmbd_cut_sheet_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_fmbd_object_attribute_cell_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_fmbd_object_attribute_column_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_fmbd_object_attribute_row_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_fmbd_object_attribute_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_fmbd_pin_list_cell_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_fmbd_pin_list_column_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_fmbd_pin_list_header_row_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_fmbd_pin_list_row_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_fmbd_pin_list_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_folded_section_line_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_font_table_type - Static variable in class nxopen.uf.UFConstants
-
- UF_foreign_surf_type - Static variable in class nxopen.uf.UFConstants
-
- UF_foreign_surface_data_type - Static variable in class nxopen.uf.UFConstants
-
- UF_foreign_surface_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_foreign_surface_type - Static variable in class nxopen.uf.UFConstants
-
- UF_FORGEO_EVALUATOR_MISSING - Static variable in class nxopen.uf.UFConstants
-
- UF_FORGEO_INCOMPLETE - Static variable in class nxopen.uf.UFConstants
-
- UF_FORGEO_RECTANGULAR - Static variable in class nxopen.uf.UFConstants
-
- UF_FORGEO_TRIANGULAR - Static variable in class nxopen.uf.UFConstants
-
- UF_gap_flushness_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT__MAX_KEYWORD - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT__MIN_KEYWORD - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_END_OF_TABLE - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_ERR_BAD_ANNOTATION - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_ERR_BAD_CHARACTERISTIC - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_ERR_BAD_COUNT - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_ERR_BAD_DATUM_PREC - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_ERR_BAD_EDGE - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_ERR_BAD_ENUM - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_ERR_BAD_FACE_IN_LIST - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_ERR_BAD_FEATURE_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_ERR_BAD_FRAME_MOD - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_ERR_BAD_MAT_MODIFIER - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_ERR_BAD_PATTERN_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_ERR_BAD_PRECEDENCE_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_ERR_BAD_SIZE_VALUE_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_ERR_BAD_STANDARD - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_ERR_BAD_TOL_FORMAT - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_ERR_BAD_TOLERANCE_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_ERR_BAD_ZONE_SHAPE - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_ERR_DATUM_EXISTS - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_ERR_DELETED_DATUM - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_ERR_DWG_DISPLAYED - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_ERR_FACE_MAP_MISMATCH - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_ERR_FEAT_NOT_VALID - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_ERR_FEATURE_NOT_DATUM - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_ERR_FEATURE_NOT_PULLED - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_ERR_INCH_PART_WITH_ISO_STANDARD - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_ERR_INVALID_ASSOC_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_ERR_INVALID_FACE_MAP - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_ERR_INVALID_FACES_FOR_EDIT - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_ERR_INVALID_FEAT_TYPE_FOR_THREAD_TOL - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_ERR_INVALID_INSTANCE - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_ERR_INVALID_KEYWORD - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_ERR_INVALID_LIM_FITS_DATA - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_ERR_INVALID_MODL_DATA - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_ERR_INVALID_MODL_FEATURE_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_ERR_INVALID_MODL_PARAM - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_ERR_INVALID_PATTERN_QUERIED - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_ERR_INVALID_PRODUCT_ATT_NUM_FOR_SPLINE_GEAR - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_ERR_INVALID_PROFILE_TOL - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_ERR_INVALID_PROFILE_ZON - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_ERR_INVALID_REGION_BODIES - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_ERR_INVALID_THREAD_TOL - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_ERR_INVALID_VIEW - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_ERR_MODL_FEATURE_NULL_TAG - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_ERR_MODL_FEATURES_NOT_FULLY_LOADED - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_ERR_MODL_PARAM_MISMATCH - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_ERR_NO_ADD_PROFILE_LDR - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_ERR_NO_ADD_TO_INSTANCE - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_ERR_NO_DIRECTED_DIM - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_ERR_NO_INDEXED_LEADER - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_ERR_NO_LIMITS_AND_FITS_TOLERANCE - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_ERR_NO_REMOVE_ONLY_LDR - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_ERR_NO_SIZE_DATA_ON_FEATURE - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_ERR_NO_TOLERANCE_WITH_INDEX - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_ERR_NON_POSITIVE_PARAMETERS - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_ERR_NOT_BASE - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_ERR_NOT_COMPLEX_SUB_FEAT - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_ERR_NOT_COMPLEX_TOL_FEAT - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_ERR_NOT_DATUM - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_ERR_NOT_DATUM_INSTANCE - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_ERR_NOT_FCF - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_ERR_NOT_FEATURE_INSTANCE - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_ERR_NOT_IDENT_DATUM - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_ERR_NOT_INSTANCE - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_ERR_NOT_MULTIPLE_DATUM - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_ERR_NOT_PROFILE_FCF - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_ERR_NOT_PULLED_SUBTOLERANCE - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_ERR_NOT_SUBTOLERANCE_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_ERR_NOT_TOL_FEAT - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_ERR_NOT_VALID_DATA_FOR_PART_UNIT - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_ERR_NOT_VALID_FEAT_TYPE_FOR_LIM_FITS - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_ERR_NOT_VALID_FEAT_TYPE_FOR_LIM_FITS_ENGLISH - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_ERR_NOT_WALL_THICKNESS - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_ERR_NULL_LABEL - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_ERR_SIZE_TOL_EXISTS - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_ERR_TEST_FAILURE - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_ERR_TOL_VALIDATION_FAILED - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_ERR_TOO_MANY_FRAMES - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_ERR_UB_INTERROGATE - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_ERR_UB_IS_NULL - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_ERR_UB_NOT_ALLOWED - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_ERR_UNVAILABLE_DATA_FOR_CURRENT_SETTING - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_ERR_UPDATE_PENDING - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_ERROR_BASE - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_ERROR_RANGE - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_MAX_NAME_LEN - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_NO_ERRORS - Static variable in class nxopen.uf.UFConstants
-
- UF_GDT_WARNING - Static variable in class nxopen.uf.UFConstants
-
- UF_gear_mesh_type - Static variable in class nxopen.uf.UFConstants
-
- UF_gear_train_type - Static variable in class nxopen.uf.UFConstants
-
- UF_gear_type - Static variable in class nxopen.uf.UFConstants
-
- UF_general_face_set_type - Static variable in class nxopen.uf.UFConstants
-
- UF_general_filter_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_general_note_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_generic_ent_int_sub_ent_type - Static variable in class nxopen.uf.UFConstants
-
- UF_generic_ent_real_sub_ent_type - Static variable in class nxopen.uf.UFConstants
-
- UF_generic_entity_type - Static variable in class nxopen.uf.UFConstants
-
- UF_gfem_annotation_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_gfem_annotation_type - Static variable in class nxopen.uf.UFConstants
-
- UF_gfem_control_ferd_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_gfem_control_node_list_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_gfem_control_node_list_type - Static variable in class nxopen.uf.UFConstants
-
- UF_gfem_deflected_dsp_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_gfem_element_ferd_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_gfem_element_form_10_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_gfem_element_form_1_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_gfem_element_form_2_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_gfem_element_form_3_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_gfem_element_form_4_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_gfem_element_form_5_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_gfem_element_form_6_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_gfem_element_form_7_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_gfem_element_form_8_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_gfem_element_form_9_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_gfem_element_type - Static variable in class nxopen.uf.UFConstants
-
- UF_gfem_ferd_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_gfem_ferd_type - Static variable in class nxopen.uf.UFConstants
-
- UF_gfem_load_displacement_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_gfem_load_edge_pressure_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_gfem_load_face_pressure_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_gfem_load_force_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_gfem_load_moment_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_gfem_load_nodal_temp_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_gfem_load_rotation_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_gfem_load_type - Static variable in class nxopen.uf.UFConstants
-
- UF_gfem_loader_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_gfem_loader_type - Static variable in class nxopen.uf.UFConstants
-
- UF_gfem_local_csys_cyl_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_gfem_local_csys_rect_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_gfem_local_csys_spher_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_gfem_local_csys_type - Static variable in class nxopen.uf.UFConstants
-
- UF_gfem_material_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_gfem_material_type - Static variable in class nxopen.uf.UFConstants
-
- UF_gfem_node_ferd_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_gfem_node_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_gfem_node_type - Static variable in class nxopen.uf.UFConstants
-
- UF_gfem_outline_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_gfem_outline_type - Static variable in class nxopen.uf.UFConstants
-
- UF_gfem_post_data_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_gfem_post_data_type - Static variable in class nxopen.uf.UFConstants
-
- UF_gfem_post_display_type - Static variable in class nxopen.uf.UFConstants
-
- UF_gfem_post_ferd_type - Static variable in class nxopen.uf.UFConstants
-
- UF_gfem_post_group_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_gfem_post_group_type - Static variable in class nxopen.uf.UFConstants
-
- UF_gfem_property_set_form_1_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_gfem_property_set_form_3_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_gfem_property_set_form_7_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_gfem_property_set_type - Static variable in class nxopen.uf.UFConstants
-
- UF_gfem_vctr_deflctd_dsp_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_gfem_vctr_display_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_group_type - Static variable in class nxopen.uf.UFConstants
-
- UF_half_section_line_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_highlight_lines_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_history_type - Static variable in class nxopen.uf.UFConstants
-
- UF_HOLETABLE_IGNORED_HOLE - Static variable in class nxopen.uf.UFConstants
-
- UF_HOLETABLE_invalid_input - Static variable in class nxopen.uf.UFConstants
-
- UF_HOLETABLE_invalid_ordinate_origin - Static variable in class nxopen.uf.UFConstants
-
- UF_HOLETABLE_invalid_selected_object - Static variable in class nxopen.uf.UFConstants
-
- UF_HOLETABLE_invalid_selection - Static variable in class nxopen.uf.UFConstants
-
- UF_HOLETABLE_TABNOT_internal_error - Static variable in class nxopen.uf.UFConstants
-
- UF_HOLETABLE_TABNOT_NO_ERRORS - Static variable in class nxopen.uf.UFConstants
-
- UF_HOLETABLE_view_already_selected - Static variable in class nxopen.uf.UFConstants
-
- UF_HPAO_NO_UF_HPAO_PARMS - Static variable in class nxopen.uf.UFConstants
-
- UF_HPAO_NOT_HPAO_OBJECT - Static variable in class nxopen.uf.UFConstants
-
- UF_HPAO_OBJECT_CREATE_FAILED - Static variable in class nxopen.uf.UFConstants
-
- UF_HPAO_OBJECT_EDIT_FAILED - Static variable in class nxopen.uf.UFConstants
-
- UF_image_raster_image_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_image_type - Static variable in class nxopen.uf.UFConstants
-
- UF_infinite_line_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_insp_align_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_insp_bounding_feature_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_insp_construct_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_insp_feature_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_insp_misc_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_insp_move_data_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_insp_move_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_insp_mthd_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_insp_output_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_insp_path_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_insp_sensor_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_insp_setup_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_insp_tolerance_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_instance_type - Static variable in class nxopen.uf.UFConstants
-
- UF_integer_attribute_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_InterferenceCurveGroupSubtype - Static variable in class nxopen.uf.UFConstants
-
- UF_invis_solid_record_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_kanji_type - Static variable in class nxopen.uf.UFConstants
-
- UF_KF_UGMGR_EXPORT_DFA_IN_ASSEMBLY - Static variable in class nxopen.uf.UFConstants
-
- UF_KF_UGMGR_EXPORT_DFA_IN_PART - Static variable in class nxopen.uf.UFConstants
-
- UF_last_operation_pointer_type - Static variable in class nxopen.uf.UFConstants
-
- UF_LAYER_ACTIVE_LAYER - Static variable in class nxopen.uf.UFConstants
-
- UF_LAYER_CAT_DESC_LEN - Static variable in class nxopen.uf.UFConstants
-
- UF_layer_category_type - Static variable in class nxopen.uf.UFConstants
-
- UF_LAYER_INACTIVE_LAYER - Static variable in class nxopen.uf.UFConstants
-
- UF_LAYER_MAX_LAYER - Static variable in class nxopen.uf.UFConstants
-
- UF_LAYER_MIN_LAYER - Static variable in class nxopen.uf.UFConstants
-
- UF_LAYER_REFERENCE_LAYER - Static variable in class nxopen.uf.UFConstants
-
- UF_LAYER_WORK_LAYER - Static variable in class nxopen.uf.UFConstants
-
- UF_layout_type - Static variable in class nxopen.uf.UFConstants
-
- UF_leader_type - Static variable in class nxopen.uf.UFConstants
-
- UF_LEGEND_BORDER_ATTR - Static variable in class nxopen.uf.UFConstants
-
- UF_LEGEND_FONT_SIZE_ATTR - Static variable in class nxopen.uf.UFConstants
-
- UF_LEGEND_FOOTER_ATTR - Static variable in class nxopen.uf.UFConstants
-
- UF_LEGEND_HEADER_ATTR - Static variable in class nxopen.uf.UFConstants
-
- UF_LEGEND_INDEX_ATTR - Static variable in class nxopen.uf.UFConstants
-
- UF_LEGEND_INDEX_COLOR_ATTR - Static variable in class nxopen.uf.UFConstants
-
- UF_LEGEND_INDEX_COLOR_SMOOTH_ATTR - Static variable in class nxopen.uf.UFConstants
-
- UF_LEGEND_INDEX_COLOR_WIDTH_ATTR - Static variable in class nxopen.uf.UFConstants
-
- UF_LEGEND_INDEX_HEIGHT_ATTR - Static variable in class nxopen.uf.UFConstants
-
- UF_LEGEND_INDEX_TEXT_ATTR - Static variable in class nxopen.uf.UFConstants
-
- UF_LEGEND_INDEX_TEXT_JUSTIFY_ATTR - Static variable in class nxopen.uf.UFConstants
-
- UF_LEGEND_WIDTH_ATTR - Static variable in class nxopen.uf.UFConstants
-
- UF_length_attribute_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_light_source_type - Static variable in class nxopen.uf.UFConstants
-
- UF_limit_or_fit_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_line_normal_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_line_old_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_line_profile_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_line_type - Static variable in class nxopen.uf.UFConstants
-
- UF_linear_pattern_definition_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_LINKED_EXT_GROUP_BY_COMPONENT - Static variable in class nxopen.uf.UFConstants
-
- UF_LINKED_EXT_GROUP_NONE - Static variable in class nxopen.uf.UFConstants
-
- UF_LINKED_EXT_GROUP_SINGLE - Static variable in class nxopen.uf.UFConstants
-
- UF_LINKED_HL_RES_COARSE - Static variable in class nxopen.uf.UFConstants
-
- UF_LINKED_HL_RES_FINE - Static variable in class nxopen.uf.UFConstants
-
- UF_LINKED_HL_RES_NORMAL - Static variable in class nxopen.uf.UFConstants
-
- UF_LINKED_HL_RES_VERY_FINE - Static variable in class nxopen.uf.UFConstants
-
- UF_LINKED_RAY_ABOVE_NORMS - Static variable in class nxopen.uf.UFConstants
-
- UF_LINKED_RAY_ALONG_NORMS - Static variable in class nxopen.uf.UFConstants
-
- UF_LINKED_RAY_FROM_POINT - Static variable in class nxopen.uf.UFConstants
-
- UF_local_radius_analysis_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_logic_part_master_type - Static variable in class nxopen.uf.UFConstants
-
- UF_logic_part_type - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_canned_cycle_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_cavity_milling_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_clsf_task_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_cylinder_milling_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_dp_boundary_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_dp_curve_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_dp_none_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_dp_point_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_dp_radial_curve_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_dp_spiral_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_dp_surface_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_dp_tool_path_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_dp_ud_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_dpm_amill_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_dpm_arc_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_dpm_blade_finish_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_dpm_blade_rough_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_dpm_blend_finish_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_dpm_boundary_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_dpm_contour_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_dpm_curve_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_dpm_edge_finish_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_dpm_fcut_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_dpm_hub_finish_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_dpm_interpolated_tool_path_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_dpm_line_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_dpm_motions_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_dpm_none_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_dpm_radial_curve_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_dpm_spiral_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_dpm_surface_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_dpm_text_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_dpm_tool_path_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_dpm_ud_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_drill_mode_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_drill_mthd_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_drill_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_face_milling_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_fb_hole_milling_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_geom_boundary_0_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_geom_boundary_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_geom_camgeom_data_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_geom_camgeom_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_geom_contain_edge_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_geom_cut_level_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_geom_face_bnd_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_geom_face_boundary_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_geom_feature_list_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_geom_feature_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_geom_ipw_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_geom_lathe_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_geom_planar_mill_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_geom_pnt_to_pnt_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_geom_seq_curve_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_geom_seq_surf_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_geom_surf_mill_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_geom_text_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_gmc_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_groove_milling_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_gssm_grip_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_gssm_main_op_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_gssm_sub_op_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_hole_drilling_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_hole_making_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_hole_mthd_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_instanced_oper_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_laser_move_data_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_laser_move_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_laser_mthd_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_laser_teachmode_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_lathe_face_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_lathe_finish_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_lathe_groove_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_lathe_mc_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_lathe_mode_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_lathe_mthd_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_lathe_post_cmnds_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_lathe_rough_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_lathe_thread_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_lathe_ud_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_manual_move_data_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_manual_move_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_mass_edit_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_mill_mc_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_mill_mode_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_mill_mthd_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_mill_post_cmnds_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_mill_probing_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_mill_tool_probing_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_mill_ud_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_mode_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_mthd_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_ncm_clgeom_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_ncm_engret_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_ncm_point_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_ncm_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_ncm_transfer_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_oldopr_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_optim_task_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_order_task_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_orphan_oper_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_param_line_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_plunge_milling_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_pocket_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_point_to_point_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_probing_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_region_manager_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_rough_to_depth_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_seq_curve_lathe_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_seq_curve_mill_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_setup_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_subop_blade_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_subop_command_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_subop_containment_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_subop_floorwall_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_subop_ncm_appdep_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_subop_ncm_engret_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_subop_ncm_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_subop_ncm_trav_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_subop_region_element_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_subop_region_shape_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_subop_region_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_subop_tool_axis_data_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_surface_contour_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_sync_event_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_thread_milling_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_tool_assm_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_tool_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_tool_wedm_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_turn_auxiliary_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_turn_cdrill_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_turn_finish_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_turn_mode_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_turn_mthd_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_turn_probing_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_turn_rough_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_turn_teachmode_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_turn_thread_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_turn_tool_probing_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_vasc_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_vazl_milling_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_volumn_milling_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_wed_post_cmnds_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_wedm_backburn_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_wedm_cutoff_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_wedm_ext_finish_trim_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_wedm_external_group_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_wedm_external_trim_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_wedm_feature_group_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_wedm_finish_trim_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_wedm_internal_group_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_wedm_internal_trim_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_wedm_mc_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_wedm_mode_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_wedm_mthd_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_wedm_no_core_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_wedm_nocore_group_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_wedm_open_group_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_wedm_open_profile_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_wedm_rough_pass_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_wedm_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_wedm_ud_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_zig_zag_surf_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mach_zlevel_milling_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_machining_boundary_member_type - Static variable in class nxopen.uf.UFConstants
-
- UF_machining_boundary_type - Static variable in class nxopen.uf.UFConstants
-
- UF_machining_clip_type - Static variable in class nxopen.uf.UFConstants
-
- UF_machining_contact_path_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_machining_control_event_type - Static variable in class nxopen.uf.UFConstants
-
- UF_machining_display_type - Static variable in class nxopen.uf.UFConstants
-
- UF_machining_dp_type - Static variable in class nxopen.uf.UFConstants
-
- UF_machining_feedrate_type - Static variable in class nxopen.uf.UFConstants
-
- UF_machining_geom_type - Static variable in class nxopen.uf.UFConstants
-
- UF_machining_geometry_grp_type - Static variable in class nxopen.uf.UFConstants
-
- UF_machining_global_data_type - Static variable in class nxopen.uf.UFConstants
-
- UF_machining_mach_dyn_ipw_mill_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_machining_mach_dyn_ipw_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_machining_mach_dyn_ipw_turn_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_machining_mach_head_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_machining_mach_ipw_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_machining_mach_kim_arc2d_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_machining_mach_kim_chain_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_machining_mach_kim_collision_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_machining_mach_kim_comp_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_machining_mach_kim_curve2d_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_machining_mach_kim_degof_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_machining_mach_kim_display_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_machining_mach_kim_junction_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_machining_mach_kim_line2d_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_machining_mach_kim_main_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_machining_mach_kim_sinucast_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_machining_mach_kim_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_machining_mach_kim_valuator_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_machining_mach_mtb_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_machining_mach_pocket_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_machining_mach_selectable_path_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_machining_mach_sim_kim_gouge_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_machining_mach_sim_kim_ipw_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_machining_mach_sim_kim_main_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_machining_mach_sim_kim_pocket_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_machining_mach_sim_kim_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_machining_mach_sim_kim_tool_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_machining_mach_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_machining_mach_tool_grp_type - Static variable in class nxopen.uf.UFConstants
-
- UF_machining_mach_turret_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_machining_master_operation_type - Static variable in class nxopen.uf.UFConstants
-
- UF_machining_mce_endofpath_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_machining_mce_inpath_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_machining_mce_lathe_mc_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_machining_mce_mill_mc_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_machining_mce_number_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_machining_mce_startup_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_machining_mce_wedm_endofpath_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_machining_mce_wedm_inpath_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_machining_mce_wedm_mc_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_machining_mce_wedm_startup_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_machining_mfgftr_type - Static variable in class nxopen.uf.UFConstants
-
- UF_machining_mode_type - Static variable in class nxopen.uf.UFConstants
-
- UF_machining_mthd_type - Static variable in class nxopen.uf.UFConstants
-
- UF_machining_ncm_type - Static variable in class nxopen.uf.UFConstants
-
- UF_machining_null_grp_type - Static variable in class nxopen.uf.UFConstants
-
- UF_machining_operation_type - Static variable in class nxopen.uf.UFConstants
-
- UF_machining_parameter_set_type - Static variable in class nxopen.uf.UFConstants
-
- UF_machining_path_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_machining_path_type - Static variable in class nxopen.uf.UFConstants
-
- UF_machining_pathindex_type - Static variable in class nxopen.uf.UFConstants
-
- UF_machining_post_command_type - Static variable in class nxopen.uf.UFConstants
-
- UF_machining_setup_type - Static variable in class nxopen.uf.UFConstants
-
- UF_machining_suboperation - Static variable in class nxopen.uf.UFConstants
-
- UF_machining_task_type - Static variable in class nxopen.uf.UFConstants
-
- UF_machining_tldsp_type - Static variable in class nxopen.uf.UFConstants
-
- UF_machining_tool_path_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_machining_tool_type - Static variable in class nxopen.uf.UFConstants
-
- UF_machining_ude_map_type - Static variable in class nxopen.uf.UFConstants
-
- UF_margin_type - Static variable in class nxopen.uf.UFConstants
-
- UF_material_type - Static variable in class nxopen.uf.UFConstants
-
- UF_matrix_type - Static variable in class nxopen.uf.UFConstants
-
- UF_max_entity_type - Static variable in class nxopen.uf.UFConstants
-
- UF_MAX_EXP_BUFSIZE - Static variable in class nxopen.uf.UFConstants
-
- UF_MAX_EXP_LENGTH - Static variable in class nxopen.uf.UFConstants
-
- UF_MAX_EXP_NCHARS - Static variable in class nxopen.uf.UFConstants
-
- UF_MAX_UNIQUE_FILE_NAME_BUFSIZE - Static variable in class nxopen.uf.UFConstants
-
- UF_MAX_UNIQUE_FILE_NAME_NCHARS - Static variable in class nxopen.uf.UFConstants
-
- UF_MAX_UNIQUE_FILE_NAME_SIZE - Static variable in class nxopen.uf.UFConstants
-
- UF_MAXWORD - Static variable in class nxopen.uf.UFConstants
-
- UF_MB_APPLICATION_BUTTON - Static variable in class nxopen.uf.UFConstants
-
- UF_MB_CASCADE_BUTTON - Static variable in class nxopen.uf.UFConstants
-
- UF_MB_MAIN_MENUBAR_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_MB_NULL_BUTTON - Static variable in class nxopen.uf.UFConstants
-
- UF_MB_PUSH_BUTTON - Static variable in class nxopen.uf.UFConstants
-
- UF_MB_SEPARATOR - Static variable in class nxopen.uf.UFConstants
-
- UF_MB_STYLER_IS_NOT_TOP - Static variable in class nxopen.uf.UFConstants
-
- UF_MB_STYLER_IS_TOP - Static variable in class nxopen.uf.UFConstants
-
- UF_MB_TOGGLE_BUTTON - Static variable in class nxopen.uf.UFConstants
-
- UF_MB_VIEW_POPUP_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_mcs_display_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mdm_3d_contact_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mdm_analysis_pt_type - Static variable in class nxopen.uf.UFConstants
-
- UF_mdm_base_action_marker_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mdm_bush_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mdm_cable_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mdm_cofm_marker_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mdm_constraint_point_on_surface_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mdm_constraint_type - Static variable in class nxopen.uf.UFConstants
-
- UF_mdm_contact_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mdm_contact_type - Static variable in class nxopen.uf.UFConstants
-
- UF_mdm_crv_crv_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mdm_curve_curve_contact_type - Static variable in class nxopen.uf.UFConstants
-
- UF_mdm_cv_fixed_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mdm_cv_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mdm_cylinder_fixed_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mdm_cylinder_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mdm_damper_2_links_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mdm_damper_rot_rev_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mdm_damper_slider_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mdm_damper_type - Static variable in class nxopen.uf.UFConstants
-
- UF_mdm_flexbody_type - Static variable in class nxopen.uf.UFConstants
-
- UF_mdm_force_type - Static variable in class nxopen.uf.UFConstants
-
- UF_mdm_gear_fixed_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mdm_gear_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mdm_general_coupler_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mdm_genforce_type - Static variable in class nxopen.uf.UFConstants
-
- UF_mdm_inertia_marker_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mdm_interference_type - Static variable in class nxopen.uf.UFConstants
-
- UF_mdm_joint_fixed_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mdm_joint_type - Static variable in class nxopen.uf.UFConstants
-
- UF_mdm_jprims_atpoint_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mdm_jprims_inline_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mdm_jprims_inplane_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mdm_jprims_orientation_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mdm_jprims_parallel_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mdm_jprims_perpendicular_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mdm_link_type - Static variable in class nxopen.uf.UFConstants
-
- UF_mdm_marker_type - Static variable in class nxopen.uf.UFConstants
-
- UF_mdm_measure_type - Static variable in class nxopen.uf.UFConstants
-
- UF_mdm_mechanism_type - Static variable in class nxopen.uf.UFConstants
-
- UF_mdm_motion_vector_type - Static variable in class nxopen.uf.UFConstants
-
- UF_mdm_motor_type - Static variable in class nxopen.uf.UFConstants
-
- UF_mdm_planar_fixed_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mdm_planar_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mdm_pmdc_torque_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mdm_pmdc_velocity_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mdm_pt_crv_fixed_curve_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mdm_pt_crv_fixed_point_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mdm_pt_crv_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mdm_rckpn_fixed_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mdm_rckpn_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mdm_revolute_fixed_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mdm_revolute_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mdm_screw_fixed_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mdm_screw_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mdm_sensor_acceleration_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mdm_sensor_displacement_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mdm_sensor_force_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mdm_sensor_torque_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mdm_sensor_type - Static variable in class nxopen.uf.UFConstants
-
- UF_mdm_sensor_velocity_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mdm_slider_fixed_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mdm_slider_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mdm_sphere_fixed_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mdm_sphere_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mdm_spring_comp_2_pt_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mdm_spring_comp_slider_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mdm_spring_rot_cam_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mdm_spring_rot_rev_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mdm_spring_trans_2_pt_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mdm_spring_trans_cam_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mdm_spring_trans_ext_links_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mdm_spring_trans_ext_slider_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mdm_spring_trans_slider_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mdm_spring_type - Static variable in class nxopen.uf.UFConstants
-
- UF_mdm_torque_form_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mdm_torque_type - Static variable in class nxopen.uf.UFConstants
-
- UF_mdm_trace_type - Static variable in class nxopen.uf.UFConstants
-
- UF_mdm_universal_fixed_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mdm_universal_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mdm_user_defined_marker_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mdm_vforce_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mdm_vtorque_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_MEASURE_LENGTH_PER_PRESSURE_ft3__lbf - Static variable in class nxopen.uf.UFConstants
-
- UF_MEASURE_LENGTH_PER_PRESSURE_in3__lbf - Static variable in class nxopen.uf.UFConstants
-
- UF_MEASURE_LENGTH_PER_PRESSURE_m3__mN - Static variable in class nxopen.uf.UFConstants
-
- UF_MEASURE_LENGTH_PER_PRESSURE_m3__N - Static variable in class nxopen.uf.UFConstants
-
- UF_MEASURE_LENGTH_PER_PRESSURE_mm3__mN - Static variable in class nxopen.uf.UFConstants
-
- UF_MEASURE_LENGTH_PER_PRESSURE_mm3__N - Static variable in class nxopen.uf.UFConstants
-
- UF_MEASURE_PRESSURE_PER_LENGTH_lbf__ft3 - Static variable in class nxopen.uf.UFConstants
-
- UF_MEASURE_PRESSURE_PER_LENGTH_lbf__in3 - Static variable in class nxopen.uf.UFConstants
-
- UF_MEASURE_PRESSURE_PER_LENGTH_mN__m3 - Static variable in class nxopen.uf.UFConstants
-
- UF_MEASURE_PRESSURE_PER_LENGTH_mN__mm3 - Static variable in class nxopen.uf.UFConstants
-
- UF_MEASURE_PRESSURE_PER_LENGTH_N__m3 - Static variable in class nxopen.uf.UFConstants
-
- UF_MEASURE_PRESSURE_PER_LENGTH_N__mm3 - Static variable in class nxopen.uf.UFConstants
-
- UF_MEASURE_PRESSURE_PER_VELOCITY_lbf_sec__ft3 - Static variable in class nxopen.uf.UFConstants
-
- UF_MEASURE_PRESSURE_PER_VELOCITY_lbf_sec__in3 - Static variable in class nxopen.uf.UFConstants
-
- UF_MEASURE_PRESSURE_PER_VELOCITY_mN_sec__m3 - Static variable in class nxopen.uf.UFConstants
-
- UF_MEASURE_PRESSURE_PER_VELOCITY_mN_sec__mm3 - Static variable in class nxopen.uf.UFConstants
-
- UF_MEASURE_PRESSURE_PER_VELOCITY_N_sec__m3 - Static variable in class nxopen.uf.UFConstants
-
- UF_MEASURE_PRESSURE_PER_VELOCITY_N_sec__mm3 - Static variable in class nxopen.uf.UFConstants
-
- UF_mechatronics_adapter_formula_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mechatronics_adapter_signal_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mechatronics_angular_limit_joint_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mechatronics_angular_spring_joint_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mechatronics_ball_joint_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mechatronics_breaking_constraint_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mechatronics_cam_constraint_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mechatronics_change_material_constraint_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mechatronics_collision_body_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mechatronics_collision_material_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mechatronics_conveyor_surface_constraint_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mechatronics_curve_on_curve_joint_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mechatronics_cylindrical_joint_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mechatronics_data_type - Static variable in class nxopen.uf.UFConstants
-
- UF_mechatronics_electrical_part_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mechatronics_external_connection_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mechatronics_fixed_joint_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mechatronics_function_comp_container_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mechatronics_function_oper_container_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mechatronics_function_parm_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mechatronics_function_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mechatronics_function_table_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mechatronics_gear_constraint_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mechatronics_graph_control_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mechatronics_hinge_joint_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mechatronics_kinematics_type - Static variable in class nxopen.uf.UFConstants
-
- UF_mechatronics_linear_limit_joint_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mechatronics_linear_spring_joint_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mechatronics_link_manager_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mechatronics_logic_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mechatronics_object_sink_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mechatronics_object_source_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mechatronics_physics_folder_locator_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mechatronics_physics_folder_object_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mechatronics_physics_preference_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mechatronics_point_on_curve_joint_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mechatronics_position_constraint_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mechatronics_prevent_collision_constraint_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mechatronics_proxy_object_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mechatronics_proxy_override_object_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mechatronics_requirement_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mechatronics_rigid_body_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mechatronics_runtime_behavior_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mechatronics_runtime_formula_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mechatronics_runtime_nc_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mechatronics_segment_table_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mechatronics_sequence_editor_condition_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mechatronics_sequence_editor_operation_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mechatronics_sequence_editor_parameter_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mechatronics_sequence_editor_trigger_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mechatronics_shmsignal_connection_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mechatronics_signal_adapter_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mechatronics_signal_connection_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mechatronics_sliding_joint_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mechatronics_speed_constraint_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mechatronics_system_root_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mechatronics_trigger_body_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_member_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_meshpoint_type - Static variable in class nxopen.uf.UFConstants
-
- UF_mill_bnd_featr_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mill_geom_featr_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mill_orient_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mill_text_featr_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mill_tracking_point_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_mill_volume_featr_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_MIN_NEW_WIDTH - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_ALONG_DRIVER_NORMALS - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_ALONG_FIXED_VECTOR - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_ALONG_NORMAL - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_ANIMATION_CREATE_FAILED - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_ANIMATION_UPDATE_FAILED - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_APPLE_TORUS - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_ARC_CENTER - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_ARC_TANGENT - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_ARRAYS_NON_DISTINCT - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_B_SURFACE_DRIVER - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_BAD_ARRAY_LENGTH - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_BAD_DATUM_CONSTRAINT - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_BLEND_CLIFF_OVERFLOW - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_BLEND_NO_OVERFLOW - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_BLEND_NOTCH_OVERFLOW - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_BLEND_SMOOTH_OVERFLOW - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_BLENDING_FACE - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_BOTH_X_PERIODIC - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_CIRCULAR_EDGE - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_CLOSED_NON_PERIODIC_CURVE - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_CLOSED_PERIODIC_CURVE - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_COMP_CURR_VER - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_COMPARE_BOTH_ARE_SAME_PARTS - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_COMPARE_EXAMINE_GEOM_FAILED_PART1 - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_COMPARE_EXAMINE_GEOM_FAILED_PART2 - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_COMPARE_INVALID_PART1 - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_COMPARE_INVALID_PART2 - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_COMPARE_NO_BODIES_PART1 - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_COMPARE_NO_BODIES_PART2 - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_CONICAL_FACE - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_CONICAL_TOPOLOGY - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_CONST_PARAMETER_EDGE - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_CYLINDRICAL_FACE - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_CYLINDRICAL_TOPOLOGY - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_DEVCHK_FIRST_EDGE_NOT_ON_FIRST_FACE - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_DEVCHK_SAME_EDGE_FACE_COMBO_TWICE - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_DEVCHK_SAME_TAG_INPUT_TWICE - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_DEVCHK_SECOND_EDGE_NOT_ON_SECOND_FACE - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_DEVCHK_TOO_FEW_CHECK_POINTS - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_DEVCHK_TOO_FEW_U_CHECK_POINTS - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_DEVCHK_TOO_FEW_V_CHECK_POINTS - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_DEVCHK_WRONG_FIRST_CURVE_TAG - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_DEVCHK_WRONG_FIRST_EDGE_TAG - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_DEVCHK_WRONG_FIRST_FACE_TAG - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_DEVCHK_WRONG_SECOND_CURVE_TAG - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_DEVCHK_WRONG_SECOND_EDGE_TAG - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_DEVCHK_WRONG_SECOND_FACE_TAG - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_DOUGHNUT_TORUS - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_DRAFTBODY_MATCHTYPE_TANGENTTOFACE_NOT_SUPPORTED - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_DUPLICATE_ELEMENT - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_DYNAMIC_UPDATE_CONTINUOUS - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_DYNAMIC_UPDATE_INCREMENTAL - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_EDGE - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_ELLIPTICAL_EDGE - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_END_POINT - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_ENDPOINT_1 - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_ENDPOINT_2 - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_ERR_BLEND_CANT_APPLY - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_ERR_BLEND_HASNO_INPUTDATA - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_ERR_INVALID_LS_WEIGHT - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_ERR_invalid_pointer - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_ERR_MULTIPLE_BODIES - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_ERR_NULL_SECTION - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_ERR_PENDING_UPDATE - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_ERROR_SHIFT - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_EVAL - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_EVAL_ALL - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_EVAL_DERIV1 - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_EVAL_DERIV2 - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_EVAL_DERIV3 - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_EVAL_NORMAL - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_EVAL_UNIT_NORMAL - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_FIXED_LENGTH - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_FLAT_TOPOLOGY - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_FOREIGN_EDGE - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_FOREIGN_FACE - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_FULL_THREAD - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_HORZ_CENTERLINE_PNT_1 - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_HORZ_CENTERLINE_PNT_2 - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_INCL_INSTANCES - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_INTERSECT_NOT_PLANE_OR_DATUM_PLANE - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_INTERSECTION_EDGE - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_INVALID_FACE_OR_PLANE - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_INVALID_LENGTH_PARAMETER - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_INVALID_ROOT_PART - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_INVALID_WORK_PART - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_LATER_TIMESTAMP - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_LEFT_END_POINT - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_LEFT_HAND - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_LEMON_TORUS - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_LIMITS_NOT_SUPPORTED - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_LINEAR - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_LINEAR_EDGE - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_LOC - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_LOC_1STDERV - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_LOC_1STDERV_2NDDERV - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_MAX_X_PERIODIC - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_MESH_OF_CURVES_DRIVER - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_MID_POINT - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_MIN_X_PERIODIC - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_NO_DYNAMIC_UPDATE - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_NO_INSTANCES - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_NON_PERIODIC - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_NON_TAPERED - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_NOT_A_TORUS - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_NOT_SAME_BODY - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_OFFSET_FACE - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_OPEN_CURVE - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_OPPOSITE_NORMAL - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_OSCULATING_APPLE_TORUS - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_PARAMETRIC_FACE - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_PATCH_HOLE - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_PERIODIC - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_PLANAR - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_PLANAR_FACE - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_POINT - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_POINT_NOT_ON_FACE - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_REPAIR_OPTION_PLANES_NOT_SUPPORTED - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_RIGHT_END_POINT - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_RIGHT_HAND - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_SELF_REFIT_DRIVER - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_SHEET_BODY - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_SIMPL_FACE_NOT_REMOVED - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_SIMPL_HEAL_FAILED - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_SIMPL_NO_FACES_DELETED - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_SIMPL_NO_RETAINED_FACE - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_SOLID_BODY - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_SP_CURVE_EDGE - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_SPHERICAL_FACE - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_SPHERICAL_TOPOLOGY - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_SPLINE_EDGE - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_STATE_CLAMPED - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_STATE_CLOSED - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_STATE_DEGEN_EDGE - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_STATE_DEGENERACY - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_STATE_G1_DISCONTINUITY - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_STATE_KNOT_DECREASING - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_STATE_KNOT_MULT - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_STATE_KNOT_NONC0 - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_STATE_KNOT_TOOCLOSE - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_STATE_PERIODIC - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_STATE_RANGE_END - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_STATE_RANGE_START - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_STATE_SELF_INTERSECT - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_STATE_SMOOTHED_TO_CN - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_STATE_UNNORMALIZED - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_STRING_ADD - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_STRING_REMOVE - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_STRING_REPLACE - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_SWEPT_FACE - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_TAPERED - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_THREE_DIMENSIONAL - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_TOROIDAL_FACE - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_TOROIDAL_TOPOLOGY - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_TORUS_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_TRIMMED_CURVE_EDGE - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_UDF_CANT_EDITED - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_UDF_CANT_INSTANTIATED - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_UDF_INVALID_EXPS - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_UDF_INVALID_MAPPING - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_UDF_INVALID_PARENTS - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_UNABLE_TO_CREATE_GEODESIC_CURVES - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_UNABLE_TO_FIRE_RAY - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_UPDATE_ALL - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_UPDATE_FIRST_LEVEL - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_VERT_CENTERLINE_PNT_1 - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_VERT_CENTERLINE_PNT_2 - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_WRONG_BODY - Static variable in class nxopen.uf.UFConstants
-
- UF_MODL_WRONG_CURVE_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_mold_flow_moldex3d_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_MOTION_articulation_not_initialized - Static variable in class nxopen.uf.UFConstants
-
- UF_MOTION_input_not_driver - Static variable in class nxopen.uf.UFConstants
-
- UF_MOTION_invalid_angular_units - Static variable in class nxopen.uf.UFConstants
-
- UF_MOTION_invalid_file_name - Static variable in class nxopen.uf.UFConstants
-
- UF_MOTION_invalid_icon_scale_factor - Static variable in class nxopen.uf.UFConstants
-
- UF_MOTION_invalid_input_data - Static variable in class nxopen.uf.UFConstants
-
- UF_MOTION_invalid_joint_scale_factor - Static variable in class nxopen.uf.UFConstants
-
- UF_MOTION_invalid_measure_type - Static variable in class nxopen.uf.UFConstants
-
- UF_MOTION_joints_cause_circular_references - Static variable in class nxopen.uf.UFConstants
-
- UF_MOTION_max_error - Static variable in class nxopen.uf.UFConstants
-
- UF_MOTION_not_initialized - Static variable in class nxopen.uf.UFConstants
-
- UF_MOTION_null_pointer_not_allowed - Static variable in class nxopen.uf.UFConstants
-
- UF_MOTION_null_tag_not_allowed - Static variable in class nxopen.uf.UFConstants
-
- UF_MOTION_object_belongs_to_another_link - Static variable in class nxopen.uf.UFConstants
-
- UF_MOTION_only_one_joint_driver_allowed - Static variable in class nxopen.uf.UFConstants
-
- UF_MSAO_NO_UF_MSAO_PARMS - Static variable in class nxopen.uf.UFConstants
-
- UF_MSAO_NOT_MSAO_OBJECT - Static variable in class nxopen.uf.UFConstants
-
- UF_MSAO_OBJECT_CREATE_FAILED - Static variable in class nxopen.uf.UFConstants
-
- UF_multi_section_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_NAME_CONFLICT - Static variable in class nxopen.uf.UFConstants
-
- UF_NAME_INVALID_CHAR - Static variable in class nxopen.uf.UFConstants
-
- UF_NAME_TOO_LONG - Static variable in class nxopen.uf.UFConstants
-
- UF_ncfeatr_uda_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_ncfeatr_udf_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_NCGROUP_MAX_REASON_LEN - Static variable in class nxopen.uf.UFConstants
-
- UF_nesting_type - Static variable in class nxopen.uf.UFConstants
-
- UF_node_type - Static variable in class nxopen.uf.UFConstants
-
- UF_normal_layout_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_note_type - Static variable in class nxopen.uf.UFConstants
-
- UF_null_attribute_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_OBJ_ALIVE - Static variable in class nxopen.uf.UFConstants
-
- UF_OBJ_AQUAMARINE - Static variable in class nxopen.uf.UFConstants
-
- UF_OBJ_BLANKED - Static variable in class nxopen.uf.UFConstants
-
- UF_OBJ_BLUE - Static variable in class nxopen.uf.UFConstants
-
- UF_OBJ_BROWN - Static variable in class nxopen.uf.UFConstants
-
- UF_OBJ_cannot_set_view_name - Static variable in class nxopen.uf.UFConstants
-
- UF_OBJ_COLOR_ORIGINAL - Static variable in class nxopen.uf.UFConstants
-
- UF_OBJ_CONDEMNED - Static variable in class nxopen.uf.UFConstants
-
- UF_OBJ_CYAN - Static variable in class nxopen.uf.UFConstants
-
- UF_OBJ_DARK_RED - Static variable in class nxopen.uf.UFConstants
-
- UF_OBJ_DELETED - Static variable in class nxopen.uf.UFConstants
-
- UF_OBJ_ENTITY_NOT_NAMED - Static variable in class nxopen.uf.UFConstants
-
- UF_OBJ_EXPR_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_OBJ_FONT_CENTERLINE - Static variable in class nxopen.uf.UFConstants
-
- UF_OBJ_FONT_DASHED - Static variable in class nxopen.uf.UFConstants
-
- UF_OBJ_FONT_DOTTED - Static variable in class nxopen.uf.UFConstants
-
- UF_OBJ_FONT_DOTTED_DASHED - Static variable in class nxopen.uf.UFConstants
-
- UF_OBJ_FONT_INVISIBLE - Static variable in class nxopen.uf.UFConstants
-
- UF_OBJ_FONT_LONG_DASHED - Static variable in class nxopen.uf.UFConstants
-
- UF_OBJ_FONT_ORIGINAL - Static variable in class nxopen.uf.UFConstants
-
- UF_OBJ_FONT_PHANTOM - Static variable in class nxopen.uf.UFConstants
-
- UF_OBJ_FONT_SOLID - Static variable in class nxopen.uf.UFConstants
-
- UF_OBJ_GRAY - Static variable in class nxopen.uf.UFConstants
-
- UF_OBJ_GREEN - Static variable in class nxopen.uf.UFConstants
-
- UF_OBJ_INTERNAL_ERROR_CODE - Static variable in class nxopen.uf.UFConstants
-
- UF_OBJ_LEGACY_AQUAMARINE - Static variable in class nxopen.uf.UFConstants
-
- UF_OBJ_LEGACY_BLUE - Static variable in class nxopen.uf.UFConstants
-
- UF_OBJ_LEGACY_BROWN - Static variable in class nxopen.uf.UFConstants
-
- UF_OBJ_LEGACY_CYAN - Static variable in class nxopen.uf.UFConstants
-
- UF_OBJ_LEGACY_DARK_RED - Static variable in class nxopen.uf.UFConstants
-
- UF_OBJ_LEGACY_GRAY - Static variable in class nxopen.uf.UFConstants
-
- UF_OBJ_LEGACY_GREEN - Static variable in class nxopen.uf.UFConstants
-
- UF_OBJ_LEGACY_MAGENTA - Static variable in class nxopen.uf.UFConstants
-
- UF_OBJ_LEGACY_OLIVE - Static variable in class nxopen.uf.UFConstants
-
- UF_OBJ_LEGACY_ORANGE - Static variable in class nxopen.uf.UFConstants
-
- UF_OBJ_LEGACY_PINK - Static variable in class nxopen.uf.UFConstants
-
- UF_OBJ_LEGACY_PURPLE - Static variable in class nxopen.uf.UFConstants
-
- UF_OBJ_LEGACY_RED - Static variable in class nxopen.uf.UFConstants
-
- UF_OBJ_LEGACY_WHITE - Static variable in class nxopen.uf.UFConstants
-
- UF_OBJ_LEGACY_YELLOW - Static variable in class nxopen.uf.UFConstants
-
- UF_OBJ_MAGENTA - Static variable in class nxopen.uf.UFConstants
-
- UF_OBJ_MAX_COLOR - Static variable in class nxopen.uf.UFConstants
-
- UF_OBJ_MAX_WIDTH - Static variable in class nxopen.uf.UFConstants
-
- UF_OBJ_MIN_COLOR - Static variable in class nxopen.uf.UFConstants
-
- UF_OBJ_NAME_BUFSIZE - Static variable in class nxopen.uf.UFConstants
-
- UF_OBJ_NAME_NCHARS - Static variable in class nxopen.uf.UFConstants
-
- UF_OBJ_NAME_NOT_FOUND - Static variable in class nxopen.uf.UFConstants
-
- UF_OBJ_no_property - Static variable in class nxopen.uf.UFConstants
-
- UF_OBJ_NOT_BLANKED - Static variable in class nxopen.uf.UFConstants
-
- UF_OBJ_object_can_not_be_deleted - Static variable in class nxopen.uf.UFConstants
-
- UF_OBJ_OK - Static variable in class nxopen.uf.UFConstants
-
- UF_OBJ_OLIVE - Static variable in class nxopen.uf.UFConstants
-
- UF_OBJ_ORANGE - Static variable in class nxopen.uf.UFConstants
-
- UF_OBJ_PART_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_OBJ_PINK - Static variable in class nxopen.uf.UFConstants
-
- UF_OBJ_PURPLE - Static variable in class nxopen.uf.UFConstants
-
- UF_OBJ_RED - Static variable in class nxopen.uf.UFConstants
-
- UF_OBJ_sheet_body_property - Static variable in class nxopen.uf.UFConstants
-
- UF_OBJ_solid_body_property - Static variable in class nxopen.uf.UFConstants
-
- UF_OBJ_TEMPORARY - Static variable in class nxopen.uf.UFConstants
-
- UF_OBJ_WHITE - Static variable in class nxopen.uf.UFConstants
-
- UF_OBJ_WIDTH_1 - Static variable in class nxopen.uf.UFConstants
-
- UF_OBJ_WIDTH_2 - Static variable in class nxopen.uf.UFConstants
-
- UF_OBJ_WIDTH_3 - Static variable in class nxopen.uf.UFConstants
-
- UF_OBJ_WIDTH_4 - Static variable in class nxopen.uf.UFConstants
-
- UF_OBJ_WIDTH_5 - Static variable in class nxopen.uf.UFConstants
-
- UF_OBJ_WIDTH_6 - Static variable in class nxopen.uf.UFConstants
-
- UF_OBJ_WIDTH_7 - Static variable in class nxopen.uf.UFConstants
-
- UF_OBJ_WIDTH_8 - Static variable in class nxopen.uf.UFConstants
-
- UF_OBJ_WIDTH_9 - Static variable in class nxopen.uf.UFConstants
-
- UF_OBJ_WIDTH_NORMAL - Static variable in class nxopen.uf.UFConstants
-
- UF_OBJ_WIDTH_ORIGINAL - Static variable in class nxopen.uf.UFConstants
-
- UF_OBJ_WIDTH_THICK - Static variable in class nxopen.uf.UFConstants
-
- UF_OBJ_WIDTH_THIN - Static variable in class nxopen.uf.UFConstants
-
- UF_OBJ_YELLOW - Static variable in class nxopen.uf.UFConstants
-
- UF_occ_instance_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_occ_instance_type - Static variable in class nxopen.uf.UFConstants
-
- UF_occ_shadow_part_type - Static variable in class nxopen.uf.UFConstants
-
- UF_OCF_INVALID_BOUNDARY_METHOD - Static variable in class nxopen.uf.UFConstants
-
- UF_OCF_INVALID_FACE_DATA - Static variable in class nxopen.uf.UFConstants
-
- UF_OCF_INVALID_INPUT_STRING - Static variable in class nxopen.uf.UFConstants
-
- UF_OCF_INVALID_OFFSET_DIRECTION - Static variable in class nxopen.uf.UFConstants
-
- UF_OCF_INVALID_OFFSET_DISTANCE - Static variable in class nxopen.uf.UFConstants
-
- UF_OCF_INVALID_OFFSET_METHOD - Static variable in class nxopen.uf.UFConstants
-
- UF_OCF_INVALID_SPAN_METHOD - Static variable in class nxopen.uf.UFConstants
-
- UF_OCF_INVALID_TRIM_METHOD - Static variable in class nxopen.uf.UFConstants
-
- UF_OCF_NO_CURVES_TO_OFFSET - Static variable in class nxopen.uf.UFConstants
-
- UF_OCF_NO_FACES_ON_OFFSET_SIDE - Static variable in class nxopen.uf.UFConstants
-
- UF_OCF_NO_FACES_TO_OFFSET - Static variable in class nxopen.uf.UFConstants
-
- UF_OCF_OFFSET_CSF_ERROR - Static variable in class nxopen.uf.UFConstants
-
- UF_OCF_STRING_FACE_OVERLAP_FAILURE - Static variable in class nxopen.uf.UFConstants
-
- UF_OCF_TARGET_SURFSET_SPLIT - Static variable in class nxopen.uf.UFConstants
-
- UF_offset_surface_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_offset_surface_type - Static variable in class nxopen.uf.UFConstants
-
- UF_offset_type - Static variable in class nxopen.uf.UFConstants
-
- UF_old_point_1_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_old_point_2_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_old_spline_type - Static variable in class nxopen.uf.UFConstants
-
- UF_OPER_ERROR_NO_TEMPLATE - Static variable in class nxopen.uf.UFConstants
-
- UF_OPER_ERROR_TEMPLATE_NAME_NOT_FOUND - Static variable in class nxopen.uf.UFConstants
-
- UF_OPER_MAX_NAME_BUFSIZE - Static variable in class nxopen.uf.UFConstants
-
- UF_OPER_MAX_NAME_LEN - Static variable in class nxopen.uf.UFConstants
-
- UF_OPER_MAX_NAME_NCHARS - Static variable in class nxopen.uf.UFConstants
-
- UF_OPER_OPNAME_LEN - Static variable in class nxopen.uf.UFConstants
-
- UF_ord_margin_horizontal_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_ord_margin_vertical_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_ordinate_margin_type - Static variable in class nxopen.uf.UFConstants
-
- UF_parallel_constraint_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_parallel_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_ACCESS_VECTOR - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_ACCESS_VECTOR_METHOD - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_ACROSS_VOIDS_METHOD - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_APPLY_AUTO_AUX_FLOOR - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_APPROACH_FEED_PERCENT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_APPROVED_PATH_STATUS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_AREA_SIZE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_AUTO_AUX_FLOOR_DIS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_AUTO_PAT_CENTER - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_AUTO_WALL_SELECTION - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_AVOIDANCE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_BLANK_DIST - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_BLANK_OFFSET - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_BLANK_OVERHANG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_BND_APPROX_TOGGLE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_BND_METHOD - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_BOUNDARY_TOL - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_BREAKTHRU_DIST - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_BREAKTHRU_METHOD - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CHECK_FLUTE_LENGTH - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CHECK_OFFSET - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CHECK_TOOL_LENGTH - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CIR_FEED_COMP_MAXIMUM - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CIR_FEED_COMP_MINIMUM - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CLEANUP_DIRED_STEEP - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CLEANUP_GEOM_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CLEANUP_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CLR_DIST - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CLR_HORIZ - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CLR_MIN - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CLR_PLANE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CLR_VERT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CLRPLANE_STATUS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CLRPLANE_USAGE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_COLLISION_SAFE_CLEARANCE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CONST_INCR - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CONTROL_POINT_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CONVEX_CORNER - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CONVEX_TAX_VAR - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CORNER_CIR_FEED_COMP - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CORNER_CONTROL_METHOD - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CORNER_FEED_ADJUST_PERCENT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CORNER_FILLET_PATH_RADIUS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CORNER_FILLET_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CORNER_LOOPS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CORNER_MAX_ANGLE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CORNER_MAX_TLAXIS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CORNER_MIN_ANGLE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CORNER_NUM_STEPS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CORNER_PREV_TL_DIAM - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CORNER_SLOWDOWN_LENGTH_METHOD - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CORNER_SLOWDOWN_STATUS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CORNER_TL_DIAM_PERCENT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CROSS_HOLE_ANG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CROSS_HOLE_DIAM - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CROSS_HOLE_DIST - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CROSS_HOLE_TAG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CSYS_PURPOSE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CTP_CHK_TOL - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CTR_ANG_TOLER - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CTR_DIS_TOLER - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CUSTOM_END - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CUSTOM_START - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CUT_ADJUST_REGION - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CUT_ANGLE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CUT_ANGLE_METHOD - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CUT_BETWEEN_METHOD - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CUT_CONVEX_CORNER_EXTEND - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CUT_CONVEX_LIFT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CUT_CTRL_PREDRILL_STATUS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CUT_CTRL_START_POINT_MODE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CUT_CTRL_START_POINT_TOGGLE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CUT_CTRL_TRIM_METHOD - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CUT_DIR_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CUT_EDGE_TRACE_REMOVAL - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CUT_EXTRA_PROFILE_PASSES - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CUT_FOLLOW_CHECK_STATUS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CUT_FOLLOW_PROGRESSION - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CUT_ISLAND_CLEANUP_STATUS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CUT_LEVEL_ORDER - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CUT_METHOD - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CUT_MIN_LENGTH - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CUT_MINIMIZE_NUMBER_OF_ENGAGES - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CUT_MULTI_DEPTH_INCR - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CUT_MULTI_DEPTH_METHOD - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CUT_MULTI_DEPTH_PASSES - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CUT_PERC - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CUT_PROFILE_PASS_STATUS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CUT_RAMP_DOWN_MAX_ANGLE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CUT_RAMP_METHOD - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CUT_RAMP_OPTIMIZE_METHOD - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CUT_RAMP_UP_MAX_ANGLE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CUT_RESEQ_REGION_METHOD - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CUT_STD_DRIVE_SELF_INTERSECT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CUT_STEP_MAX - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CUT_STEP_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CUT_TL_HOLDER_USAGE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CUT_TLAXIS_DELTA - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CUT_TLAXIS_DELTA_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CUT_TRACE_METHOD - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CUT_UNDERCUT_TOGGLE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CUT_UPDOWN_EXTEND - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CUT_UV_DIR - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CUT_VOLUME_ACTUAL - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CUT_VOLUME_MIN - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CUT_VOLUME_USAGE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CUT_WALL_CLEANUP_STATUS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CUT_WALLS_ONLY - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CUTAREA_EXTENSION_DIST - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CUTCOM_ANGLE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CUTCOM_DIST - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CUTCOM_PLANE_STATUS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CUTCOM_REGISTER_NUM - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CUTCOM_REGISTER_STATUS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CUTCOM_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CUTLEV_DEPTH_PER_CUT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CUTLEV_FIRST_DEPTH - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CUTLEV_GLOBAL_CUT_DEPTH - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CUTLEV_LAST_DEPTH - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CUTLEV_MAX_DEPTH - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CUTLEV_METHOD - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CUTLEV_MIN_DEPTH - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CUTLEV_RANGE_SUBDIV_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CUTLEV_RANGE_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CUTLEV_SIDE_STOCK_INCR - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CUTLEV_TOP_OFF_MODE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CUTLEV_TOPOFF_STATUS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CUTTER_DATA_OUTPUT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_CUTTER_TRACKING_POINTS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_DEPART_FEED_PERCENT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_DEPTH_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_DIAGNOSTICS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_DISP_CONTACT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_DISP_CONTACT_NORMAL - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_DISP_PATH - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_DISP_PATTERN - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_DISP_REFRESH_STATUS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_DISP_REGION_PAUSE_STATUS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_DISP_REGION_STATUS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_DISP_TOOL - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_DISP_TOOL_END - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_DISP_TOOL_END_PROJ - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_DPM_CUT_PATTERN - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_DPM_PROJ_DIR - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_DPM_PROJ_POINT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_DPM_PROJ_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_DPM_PROJ_VEC - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_DPM_STEPOVER_MAX - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_DPM_STEPOVER_MIN - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_DPM_STEPOVER_NUM - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_DPMCV_DATA_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_DPMCV_INTERPOLATION_METHOD - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_DPMCV_NUM_SEGS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_DPMCV_STEP_TOL - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_DPMCV_STEP_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_DPMRC_BOUNDARY_DIR - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_DPMRC_BOUNDARY_LEFT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_DPMRC_BOUNDARY_RIGHT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_DPMSA_DATA_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_DPMSA_INTERPOLATION_METHOD - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_DPMUD_ENTRY_PT_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_DPMUD_ENV_VAR_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_DRIVE_AVOIDANCE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_DRIVE_METHOD - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_DRIVE_POINT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_EDGEXT_PERC - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_EDGEXT_SPECIFY - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_EDGEXT_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_EMPTY_PATH - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_END_CUT_FACE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_END_CUT_UV - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_END_EXT_DIST_SPEC_VALUE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_END_EXT_DIST_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_END_EXT_DIST_USAGE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_END_TOOL_AXIS_GUIDE_VEC_METHOD - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_END_TOOL_AXIS_GUIDE_VECTOR - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_ENG_ANGLES - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_ENG_AUTO_HELICAL_DIAMETER - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_ENG_AUTO_MIN_RAMP_LENGTH - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_ENG_AUTO_RAMP_ANGLE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_ENG_AUTO_RAMP_METHOD - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_ENG_DIST - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_ENG_INIT_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_ENG_INTER_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_ENGAGE_FEED_PERCENT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_ENGAGE_INTO_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_ENGAGE_PLANE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_ENGAGE_POINT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_ENGAGE_SPINDLE_SPEED - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_ENGAGE_SPINDLE_SPEED_TOG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_ENGAGE_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_ENGAGE_VECTOR - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_ENGRET_AUTO_ACTIVE_RANGE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_ENGRET_AUTO_OVERLAP - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_ENGRET_AUTO_RADIUS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_ENGRET_AUTO_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_ENTIRE_PART - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_ENTRANCE_DIAM - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_ERROR_CHECK_FAILED - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_ERROR_LICENSE_FAILURE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_ERROR_MAP_FAILED - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_EXTRA_CROSS_METHOD - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_FACE_STOCK - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_FEATURE_TYPES - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_FEED_APPROACH - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_FEED_CUT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_FEED_DEPARTURE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_FEED_ENGAGE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_FEED_FIRST_CUT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_FEED_MAX_APPROACH_LEN_FLAG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_FEED_MIN_ACCELERATE_DECELERATE_LEN_FLAG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_FEED_PER_TOOTH - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_FEED_RAPID - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_FEED_RETRACT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_FEED_RETURN - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_FEED_SIDE_CUT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_FEED_STEPOVER - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_FEED_TRAVERSAL - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_FINISH_PASS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_FINISH_PASSES - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_FINISH_STEPOVER - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_FIRST_CUT_FEED_PERCENT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_FIXTURE_OFFSET_NUM - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_FIXTURE_OFFSET_STATUS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_FLOOR - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_FLOWCUT_MODE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_FLOWCUT_OVERLAP_DIST - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_FLOWCUT_STEEP_OPT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_FOLLOW_WALL_BOTTOM - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_FROM_POINT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_FROM_STATUS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_FROM_TOOL_AXIS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_GEOM_CHECK_CLR_MIN - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_GEOM_PARENT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_GEOM_STEEP_METHOD - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_GOHOME_METHOD - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_GOHOME_POINT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_GOHOME_STATUS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_GOHOME_TOOL_AXIS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_GOUGE_CHECKING_FLAG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_HOLDER_SECTION - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_HOLE_AXIS_IJK - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_HOLE_AXIS_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_HOLE_DEPTH_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_HOLE_DIAM - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_HOLE_TOP_OUTPUT_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_HORIZONAL_LIMIT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_IPW_SAVE_METHOD - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_IPW_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_LEVEL_TO_LEVEL_METHOD - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_LOC_RTN_MV - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_LOC_RTN_MV_STATUS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_LOC_RTN_STATUS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_LOCAL_RTN_ORDER - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_LOCAL_RTN_PT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_LOOP_RAD - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_LOWER_LIMIT_PLANE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_LWPLANE_STATUS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_LWPLANE_USAGE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_MATERIAL_SIDE_VECTOR - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_MAX_CONCAVITY_ANGLE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_MAX_CUT_TRAVERSE_DISTANCE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_MAX_CUT_TRAVERSE_PERCENT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_MAX_CUT_TRAVERSE_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_MAX_CUT_WIDTH_DIST - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_MAX_CUT_WIDTH_PERCENT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_MAX_CUT_WIDTH_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_MAX_DEPTH_DIST - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_MAX_LOOP_ANG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_MAX_PARAM_NAME_LEN - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_MCS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_MCT_ALL_CHANNEL_IDS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_MCT_CHANNEL_ID - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_MCT_TURRET_WPL_TAG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_MCT_TURRET_WPL_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_MCUTTY - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_MERGE_DIST - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_MIN_CUT_LENGHT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_MIN_LOOP_ANG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_MIN_TRAVERSAL_DIST - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_MINIMUM_CORNER_FILLET_RADIUS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_MINIMUM_THICKNESS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_MODEL_DEPTH_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_MOTION_OUTPUT_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_MULTI_FLOOR_PASSES - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_MULTI_WALL_PASSES - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_MULTIPASS_ORDER - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_NOPSTOPS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_NUM_CHASES - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_NUM_PASSES - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_NUM_STARTS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_NURBS_ANG_TOL - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_NURBS_FIT_TOL - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_NURBS_OP - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_OFFSETS_NUM - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_OUTPUT_LOAD_TOOL - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_OVERLAP_DIST - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_PART_THICKNESS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_PAT_CENTER - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_PATHCHECK_COUNT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_PATHCHECK_STATUS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_PATTERN_SECONDARY - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_PITCH_OUTPUT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_PITCH_VAR_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_PLUNGE_DIRECTION - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_PREDRILL_HOLE_DIAM - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_PREDRILL_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_PROJECTION_VECTOR - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_RAD_STOCK - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_RAMP_BETWEEN_LEVELS_ANGLE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_RAPTO_OFFSET - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_RAPTO_OFFSET_TOGGLE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_RCS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_RCS_LINKED_TO_MCS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_REGION_TOLS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_REQUIRED_LIST_SIZE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_RET_ANGLES - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_RET_AUTO_ANGLE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_RET_AUTO_DIST - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_RET_DIST - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_RET_DIST_ON_TLAXIS_CHANGE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_RET_DISTANCE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_RET_FINAL_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_RET_INTER_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_RET_POINT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_RETRACT_BACK_OUT_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_RETRACT_FEED_PERCENT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_RETRACT_PLANE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_RETRACT_POINT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_RETRACT_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_RETRACT_VECTOR - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_RETURN_FEED_PERCENT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_RETURN_METHOD - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_RETURN_POINT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_RETURN_STATUS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_ROUGH_PASSES - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_ROUND_POINT_OUTPUT_METHOD - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_ROUND_POINT_OUTPUT_STATUS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_SC_MAX_STEP_PERC - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_SCS_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_SEQUENCE_OPT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_SIDE_STOCK - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_SIMPLIFY_SHAPES_METHOD - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_SMALL_AREA_STATUS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_SPECIAL_OUTPUT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_SPINDLE_DIR_AUTO - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_SPINDLE_DIR_CONTROL - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_SPINDLE_MAX_RPM - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_SPINDLE_MAX_RPM_TOG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_SPINDLE_MODE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_SPINDLE_PRESET_RPM - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_SPINDLE_PRESET_RPM_TOG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_SPINDLE_RANGE_TEXT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_SPINDLE_RPM - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_SPINDLE_RPM_TOG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_SPINDLE_TEXT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_SPIRAL_CENTER - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_SPIRAL_RADIUS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_START_CUT_FACE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_START_CUT_UV - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_START_EXT_DIST_SPEC_VALUE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_START_EXT_DIST_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_START_EXT_DIST_USAGE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_START_LIST - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_START_METHOD - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_START_OF_ENGAGE_METHOD - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_START_POINT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_START_STATUS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_START_TOOL_AXIS_GUIDE_VEC_METHOD - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_START_TOOL_AXIS_GUIDE_VECTOR - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_STEEP_ANGLE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_STEEP_CUT_DIR - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_STEEP_MERGE_DIST - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_STEEP_OPT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_STEEP_OVERLAP_DIST - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_STEP_AHEAD_DIST - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_STEP_AHEAD_PERCENT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_STEP_AHEAD_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_STEP_INTOL - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_STEP_METHOD - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_STEP_OUTTOL - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_STEP_POINTS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_STEPOVER_APPLY_METHOD - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_STEPOVER_DEGREE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_STEPOVER_DIST - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_STEPOVER_FEED_PERCENT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_STEPOVER_MIN_MAX - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_STEPOVER_PERCENT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_STEPOVER_SCALLOP - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_STEPOVER_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_STEPOVER_UV_DIR - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_STEPOVER_VAR_DISTS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_STEPOVER_VAR_DISTS_TOOL_DEPENDENT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_STEPOVER_VAR_PASSES - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_STOCK_BLANK - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_STOCK_CHECK - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_STOCK_DRIVE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_STOCK_DRIVE_GEOM - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_STOCK_FLOOR - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_STOCK_PART - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_STOCK_PART_OFFSET - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_STOCK_PART_USE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_STOCK_PROFILE_PASS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_STOCK_TRIM - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_STOCK_WALL - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_SUPPRESS_PATH - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_SUPPRESS_PATH_DISPLAY - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_SURFACE_SPEED - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_SWARF_RULING_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_SWARF_TILT_ANGLE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TCDOPR_APPLICATION_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TCDOPR_AUTO_START_POSITION - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TCDOPR_CYCLE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TCDOPR_DEPTH - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TCDOPR_END_POINT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TCDOPR_OFF_CENTER_DIST - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TCDOPR_OFF_CENTER_TOG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TCDOPR_START_POINT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TCDOPR_STEP - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TCDOPR_STEP_MODIFIER_1 - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TCDOPR_STEP_MODIFIER_2 - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TEMPLATE_SUBTYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TEMPLATE_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TEXT_DEPTH - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TFOPR_CUT_STRATEGY - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TH_COLLISION_COUNT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_ADJ_REG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_ADJ_REG_TOG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_BARREL_RAD - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_BUTTON_DIAMETER - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_COR1_RAD - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_COR2_RAD - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_CTLG_NUM - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_CUT_EDGE_LENGTH - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_CUTCOM_REG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_CUTCOM_REG_TOG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_DESCRIPTION - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_DIAMETER - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_DIRECTION - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_EDGE_LENGTH_ARRAY - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_FLUTE_LN - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_HEAD_DESIGN - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_HEIGHT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_HOLDER_ANG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_HOLDER_DESCRIPTION - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_HOLDER_LIBREF - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_HOLDER_MAX_OFFSET - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_HOLDER_NUMBER - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_HOLDER_NUMBER_TOG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_HOLDER_OFFSET - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_HOLDER_WIDTH - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_INSERT_ANG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_INSERT_LENGTH - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_INSERT_POSITION - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_INSERT_WIDTH - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_INSERTTYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_LEFT_ADJUST - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_LEFT_ADJUST_TOG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_LEFT_ANG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_LEFT_COR_RAD - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_LEFT_CUTCOM - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_LEFT_CUTCOM_TOG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_LEFT_TP - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_LEFT_XOFF - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_LEFT_XOFF_TOG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_LEFT_YOFF - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_LEFT_YOFF_TOG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_LIBREF - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_LOW_COR_RAD - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_MANUAL_TOOLCHANGE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_MAX_DEPTH - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_MAX_DEPTH_TOG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_MAX_FACING_DIA - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_MAX_FACING_DIA_TOG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_MAX_TOOLREACH - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_MAX_TOOLREACH_TOG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_MIN_BORING_DIA - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_MIN_BORING_DIA_TOG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_MIN_FACING_DIA - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_MIN_FACING_DIA_TOG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_MIN_LENGTH - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_MIN_LENGTH_USAGE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_NO_OF_NOSES - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_NOSE_ANG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_NOSE_ANG_TOG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_NOSE_ANGLE_ARRAY - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_NOSE_RAD - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_NOSE_RAD_TOG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_NOSE_RADIUS_ARRAY - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_NOSE_WIDTH - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_NUM_FLUTES - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_NUM_STEPS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_NUMBER - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_NUMBER_TOG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_ORIENTATION - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_PITCH - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_POINT_ANG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_PRESET_CUTTER - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_RADIUS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_RELIEF_ANG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_RELIEF_ANG_OPT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_RIGHT_ADJUST - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_RIGHT_ADJUST_TOG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_RIGHT_ANG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_RIGHT_COR_RAD - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_RIGHT_CUTCOM - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_RIGHT_CUTCOM_TOG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_RIGHT_TP - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_RIGHT_XOFF - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_RIGHT_XOFF_TOG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_RIGHT_YOFF - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_RIGHT_YOFF_TOG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_RIGIDITY - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_SHANK_DIA - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_SHOULDER_DISTANCE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_SIDE_ANG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_SIZE_OPT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_STEP_ANGLE_ARRAY - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_STEP_DIA_ARRAY - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_STEP_HEIGHT_ARRAY - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_STEP_RADIUS_ARRAY - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_TAP_HOLDER_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_TAPER_ANG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_TEXT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_TEXT_TOG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_THICKNESS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_THICKNESS_OPT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_THREAD_FORMING_METHOD - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_TIP_ANG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_TIP_OFFSET - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_TRACKING_ARRAY - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_TRACKING_POINT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_TRACKPOINT_LIBREF - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_TURN_HOLDER_ANGLE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_TURN_HOLDER_HAND - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_TURN_HOLDER_HEAD_WIDTH - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_TURN_HOLDER_INSERT_EXTENSION - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_TURN_HOLDER_LENGTH - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_TURN_HOLDER_LOCK - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_TURN_HOLDER_SHANK_LINE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_TURN_HOLDER_SHANK_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_TURN_HOLDER_SHANK_WIDTH - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_TURN_HOLDER_STYLE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_TURN_HOLDER_TOG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_TURN_HOLDER_WIDTH - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_UP_COR_RAD - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_X_OFFSET - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_X_OFFSET_TOG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_XCEN_COR1 - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_XCEN_COR2 - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_XMOUNT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_Y_OFFSET - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_Y_OFFSET_TOG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_YCEN_BARREL - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_YCEN_COR1 - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_YCEN_COR2 - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_YMOUNT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_Z_OFFSET - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_Z_OFFSET_TOG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TL_ZMOUNT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TLAXIS_ANGLES - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TLAXIS_DUAL_VECS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TLAXIS_HEEL_CLEARANCE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TLAXIS_LEAD_ANGLE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TLAXIS_MAX_LEAD_ANGLE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TLAXIS_MAX_TILT_ANGLE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TLAXIS_MIN_LEAD_ANGLE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TLAXIS_MIN_TILT_ANGLE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TLAXIS_PERP_VEC - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TLAXIS_THRU_POINT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TLAXIS_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TLAXIS_VECTOR - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TOL_IN_OUT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TOOL_EMBEDDING_LIMIT_PERCENT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TOOL_POSITION - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TOOL_POSITION_OFFSET - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TOOL_RUNOFF_METHOD - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TRACKING_POINT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TRACKING_POINT_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TRANSFER_METHOD - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TRIM_OFFSET - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TROCHOID_PATH_MIN_WIDTH_DIST - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TROCHOID_PATH_MIN_WIDTH_PERCENT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TROCHOID_PATH_MIN_WIDTH_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TROCHOID_PATH_STEPOVER_DIST - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TROCHOID_PATH_STEPOVER_PERCENT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TROCHOID_PATH_STEPOVER_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TROCHOID_PATH_WIDTH_DIST - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TROCHOID_PATH_WIDTH_PERCENT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TROCHOID_PATH_WIDTH_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TROCHOID_STEPOVER_LIMIT_PERCENT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TROPR_CLEANUP_CONTROL - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TROPR_CONTINUOUS_CUTS_ONLY - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TROPR_CUT_STRATEGY - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TROPR_LEVEL_DEPTH - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TROPR_LEVEL_DEPTH_STATUS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TROPR_MAX_RAMP_LENGTH - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TROPR_MULTI_RAMP - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TROPR_MULTI_RAMP_PATTERN - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TROPR_OMIT_LAST_PASS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TROPR_RAMPING_MODE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TTDOPR_CONST_INCREMENT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TTDOPR_CREST_LINE_1ST_PT_IS_START_PT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TTDOPR_CREST_LINE_TAG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TTDOPR_END_LINE_TAG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TTDOPR_ENGAGE_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TTDOPR_FINISH_PASSES_INCREMENT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TTDOPR_FINISH_PASSES_NO_OF_PASSES - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TTDOPR_INCREMENT_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TTDOPR_INFEED_ANGLE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TTDOPR_INFEED_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TTDOPR_INFEED_VECTOR - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TTDOPR_PERCENTAGE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TTDOPR_PERCENTAGE_MAX - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TTDOPR_PERCENTAGE_MIN - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TTDOPR_PITCH_LEAD - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TTDOPR_PITCH_LEAD_TPU_END_INCREMENT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TTDOPR_PITCH_LEAD_TPU_INPUT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TTDOPR_PULLOUT_ANGLE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TTDOPR_PULLOUT_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TTDOPR_PULLOUT_VECTOR - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TTDOPR_RETRACT_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TTDOPR_ROOT_LINE_TAG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TTDOPR_STEPOVER_DIRECTION_ANGLE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TTDOPR_TOLERANCE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TTDOPR_TOTAL_DEPTH - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TTDOPR_TOTAL_DEPTH_ANGLE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TTDOPR_TOTAL_DEPTH_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TTDOPR_TPU - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TTDOPR_VARIABLE_INCREMENT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TTDOPR_VARIABLE_INCREMENT_TOOL_DEPENDENT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TTDOPR_VARIABLE_NO_OF_PASSES - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TTMOPR_CUT_DIRECTION - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TTMOPR_DRIVE_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TTMOPR_END_POINT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TTMOPR_END_POINT_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TTMOPR_EXTEND_DISTANCE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TTMOPR_EXTEND_METHOD - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TTMOPR_FEEDRATE_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TTMOPR_FEEDRATE_UNIT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TTMOPR_FEEDRATE_VALUE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TTMOPR_FIRST_CURVE_STOCK - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TTMOPR_FIRST_CURVE_TAG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TTMOPR_FIRST_CURVE_TOOL_POS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TTMOPR_MOTION_AXES - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TTMOPR_POPAWAY_ANGLE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TTMOPR_POPAWAY_DIST - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TTMOPR_POPAWAY_MTHD - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TTMOPR_SECOND_CURVE_STOCK - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TTMOPR_SECOND_CURVE_TAG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TTMOPR_SECOND_CURVE_TOOL_POS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TTMOPR_START_CHECK_STOCK - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TTMOPR_START_POINT_TAG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TTMOPR_START_STOP_TREATMENT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TTMOPR_START_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TTMOPR_STOP_CHECK_STOCK - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TTMOPR_STOP_POINT_TAG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TTMOPR_STOP_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TTMOPR_SUBOP_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TTMOPR_USE_ENG_TOG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TTMOPR_USE_RET_TOG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TTMOPR_USE_TWO_CURVES - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_APPROACH_PATH_A_AXIS_FLAGS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_APPROACH_PATH_B_AXIS_ANGLES - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_APPROACH_PATH_B_AXIS_FLAGS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_APPROACH_PATH_CS_MODE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_APPROACH_PATH_CUSTOM_FEEDRATE_UNITS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_APPROACH_PATH_CUSTOM_FEEDRATES - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_APPROACH_PATH_END_EVENTS_FLAGS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_APPROACH_PATH_END_EVENTS_PATHS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_APPROACH_PATH_FEEDRATE_MODES - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_APPROACH_PATH_FLAGS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_APPROACH_PATH_METHODS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_APPROACH_PATH_NO_OF_POINTS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_APPROACH_PATH_POINTS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_APPROACH_PATH_START_EVENTS_FLAGS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_APPROACH_PATH_START_EVENTS_PATHS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_AVOIDANCE_ADDITIONAL_CHECKING_FOR_AUTOMATIC_ENGAGE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_AVOIDANCE_ADDITIONAL_CHECKING_FOR_AUTOMATIC_RETRACT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_AVOIDANCE_ADDITIONAL_CHECKING_FOR_MINIMUM_CLEARANCE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_AVOIDANCE_APPROACH_STATUS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_AVOIDANCE_DEPARTURE_MODE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_AVOIDANCE_DEPARTURE_STATUS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_AVOIDANCE_GOHOME_MODE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_AVOIDANCE_PREFER_DIRECT_MOTION_AFTER_LAST_RETRACT_TOG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_AVOIDANCE_PREFER_DIRECT_MOTION_BETWEEN_REGIONS_TOG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_AVOIDANCE_PREFER_DIRECT_MOTION_TO_FIRST_ENGAGE_TOG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_AVOIDANCE_RETURN_ANGLE_TAG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_AVOIDANCE_RETURN_ANGLE_VALUE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_AVOIDANCE_RETURN_DELTA_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_AVOIDANCE_RETURN_DELTA_X - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_AVOIDANCE_RETURN_DELTA_Y - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_AVOIDANCE_RETURN_DISTANCE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_AVOIDANCE_RETURN_MODE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_AVOIDANCE_START_ANGLE_TAG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_AVOIDANCE_START_ANGLE_VALUE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_AVOIDANCE_START_DELTA_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_AVOIDANCE_START_DELTA_X - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_AVOIDANCE_START_DELTA_Y - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_AVOIDANCE_START_DISTANCE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_AVOIDANCE_START_MODE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_CHIPCTRL_CONST_INCREMENT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_CHIPCTRL_DISTANCE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_CHIPCTRL_FPO_TOG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_CHIPCTRL_MODE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_CHIPCTRL_TOG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_CHIPCTRL_VAR_INCREMENT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_CHIPCTRL_VAR_NO_OF_PASSES - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_CLEANUP - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_CLEAR_AXIAL_TAG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_CLEAR_AXIAL_TOG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_CLEAR_AXIAL_VAL - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_CLEAR_RADIAL_TAG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_CLEAR_RADIAL_TOG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_CLEAR_RADIAL_VAL - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_CONTOUR_DIAMETER_MAX - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_CONTOUR_DIAMETER_MIN - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_CONTOUR_FACE_MAX - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_CONTOUR_FACE_MIN - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_CONTOUR_LEVEL_MAX - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_CONTOUR_LEVEL_MIN - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_CONTOUR_STEEP_MAX - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_CONTOUR_STEEP_MIN - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_CREST_OFFSET - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_CUT_DEPTH - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_CUT_DEPTH_ARRAY - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_CUT_DEPTH_ARRAY_TOOL_DEPENDENT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_CUT_REG_SELECT_TAG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_CUT_REG_SELECT_TOG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_DEPARTURE_PATH_A_AXIS_FLAGS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_DEPARTURE_PATH_B_AXIS_ANGLES - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_DEPARTURE_PATH_B_AXIS_FLAGS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_DEPARTURE_PATH_CS_MODE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_DEPARTURE_PATH_CUSTOM_FEEDRATE_UNITS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_DEPARTURE_PATH_CUSTOM_FEEDRATES - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_DEPARTURE_PATH_END_EVENTS_FLAGS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_DEPARTURE_PATH_END_EVENTS_PATHS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_DEPARTURE_PATH_FEEDRATE_MODES - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_DEPARTURE_PATH_FLAGS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_DEPARTURE_PATH_METHODS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_DEPARTURE_PATH_NO_OF_POINTS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_DEPARTURE_PATH_POINTS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_DEPARTURE_PATH_START_EVENTS_FLAGS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_DEPARTURE_PATH_START_EVENTS_PATHS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_DIRECTION - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_DISPL_COLL_TOG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_DISTANCE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_DWELL - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_DWELL_FLAG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_DWELL_TOG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_DWELL_UNIT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_END_ANGLE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_END_OFFSET - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_ENG_1PLUNGE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_ENG_1PLUNGE_ANGLE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_ENG_1PLUNGE_AUTOTOG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_ENG_1PLUNGE_DISTANCE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_ENG_1PLUNGE_POINT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_ENG_1PLUNGE_VECTOR - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_ENG_LEVEL_BLANK - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_ENG_LEVEL_BLANK_ANGLE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_ENG_LEVEL_BLANK_AUTOTOG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_ENG_LEVEL_BLANK_DISTANCE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_ENG_LEVEL_BLANK_DISTANCE_IS_TANGENTIAL - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_ENG_LEVEL_BLANK_POINT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_ENG_LEVEL_BLANK_RADIUS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_ENG_LEVEL_BLANK_RADIUS_2 - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_ENG_LEVEL_BLANK_VECTOR - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_ENG_LEVEL_PART - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_ENG_LEVEL_PART_ANGLE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_ENG_LEVEL_PART_AUTOTOG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_ENG_LEVEL_PART_DISTANCE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_ENG_LEVEL_PART_POINT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_ENG_LEVEL_PART_RADIUS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_ENG_LEVEL_PART_VECTOR - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_ENG_LEVEL_SAFE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_ENG_LEVEL_SAFE_ANGLE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_ENG_LEVEL_SAFE_AUTOTOG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_ENG_LEVEL_SAFE_DISTANCE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_ENG_LEVEL_SAFE_DISTANCE_IS_TANGENTIAL - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_ENG_LEVEL_SAFE_EXTEND - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_ENG_LEVEL_SAFE_POINT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_ENG_LEVEL_SAFE_RADIUS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_ENG_LEVEL_SAFE_VECTOR - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_ENG_PLUNGE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_ENG_PLUNGE_ANGLE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_ENG_PLUNGE_AUTOTOG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_ENG_PLUNGE_DISTANCE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_ENG_PLUNGE_POINT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_ENG_PLUNGE_VECTOR - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_ENG_PROFILING - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_ENG_PROFILING_ANGLE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_ENG_PROFILING_AUTOTOG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_ENG_PROFILING_DISTANCE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_ENG_PROFILING_EXTEND - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_ENG_PROFILING_POINT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_ENG_PROFILING_RADIUS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_ENG_PROFILING_VECTOR - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_ENG_RET_MIN_DIST - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_ENG_TO_TRIMPOINT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_ENGAGE_DISTANCE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FEED_ACCEL - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FEED_ACCEL_LENGTH - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FEED_ACCEL_LENGTH_PERCENT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FEED_ACCEL_LENGTH_UNIT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FEED_ACCEL_UNIT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FEED_ALSO_APPLY_TO_START_AND_END_OF_PASS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FEED_CIRC_CCW - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FEED_CIRC_CCW_UNIT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FEED_CIRC_CW - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FEED_CIRC_CW_UNIT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FEED_CLEANUP_ACCEL - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FEED_CLEANUP_ACCEL_LENGTH - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FEED_CLEANUP_ACCEL_UNIT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FEED_CLEANUP_CIRC_CCW - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FEED_CLEANUP_CIRC_CCW_UNIT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FEED_CLEANUP_CIRC_CW - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FEED_CLEANUP_CIRC_CW_UNIT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FEED_CLEANUP_CUT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FEED_CLEANUP_CUT_UNIT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FEED_CLEANUP_DECEL - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FEED_CLEANUP_DECEL_LENGTH - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FEED_CLEANUP_DECEL_UNIT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FEED_CLEANUP_DIAMETER - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FEED_CLEANUP_DIAMETER_UNIT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FEED_CLEANUP_FACE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FEED_CLEANUP_FACE_UNIT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FEED_CLEANUP_LINEAR - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FEED_CLEANUP_LINEAR_UNIT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FEED_CLEAR - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FEED_CLEAR_UNIT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FEED_DECEL - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FEED_DECEL_LENGTH - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FEED_DECEL_LENGTH_PERCENT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FEED_DECEL_LENGTH_UNIT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FEED_DECEL_UNIT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FEED_DIAMETER - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FEED_DIAMETER_UNIT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FEED_FACE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FEED_FACE_UNIT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FEED_FINISH_ACCEL - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FEED_FINISH_ACCEL_LENGTH - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FEED_FINISH_ACCEL_LENGTH_PERCENT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FEED_FINISH_ACCEL_LENGTH_UNIT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FEED_FINISH_ACCEL_UNIT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FEED_FINISH_DECEL - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FEED_FINISH_DECEL_LENGTH - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FEED_FINISH_DECEL_LENGTH_PERCENT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FEED_FINISH_DECEL_LENGTH_UNIT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FEED_FINISH_DECEL_UNIT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FEED_FINISH_RAMP_IN - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FEED_FINISH_RAMP_IN_UNIT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FEED_FINISH_RAMP_LEVEL - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FEED_FINISH_RAMP_LEVEL_UNIT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FEED_FINISH_RAMP_OUT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FEED_FINISH_RAMP_OUT_UNIT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FEED_LINEAR - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FEED_LINEAR_UNIT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FEED_PROFILE_CUT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FEED_PROFILE_CUT_UNIT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FEED_RAMP_IN - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FEED_RAMP_IN_UNIT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FEED_RAMP_LEVEL - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FEED_RAMP_LEVEL_UNIT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FEED_RAMP_OUT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FEED_RAMP_OUT_UNIT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FEED_ROUGH_LAST_CUT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FEED_ROUGH_LAST_CUT_FOR_ENTIRE_PASS_TOG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FEED_ROUGH_LAST_CUT_UNIT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FEED_SHORT_SEGS_CHAMFER - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FEED_SHORT_SEGS_CHAMFER_LENGTH - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FEED_SHORT_SEGS_CHAMFER_UNIT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FEED_SHORT_SEGS_ROUND - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FEED_SHORT_SEGS_ROUND_LENGTH - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FEED_SHORT_SEGS_ROUND_UNIT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FEED_SPECIFY_MAXIMUM_CHAMFER - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FEED_SPECIFY_MAXIMUM_ROUND - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FINISH_ALTERNATE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FINISH_CUT_DEPTH - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FINISH_CUT_DEPTH_ALTERNATE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FINISH_CUT_DEPTH_ARRAY - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FINISH_CUT_DEPTH_ARRAY_TOOL_DEPENDENT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FINISH_CUT_DEPTH_TOG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FINISH_CUT_DEPTH_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FINISH_DIRECTION - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FINISH_DWELL - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FINISH_DWELL_MODE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FINISH_FILLETS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FINISH_LOC_RTN_MV - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FINISH_LOCAL_ADJUSTMENT_FLAG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FINISH_LOCAL_ADJUSTMENT_MODE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FINISH_LOCAL_DISTANCE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FINISH_LOCAL_DWELL - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FINISH_LOCAL_DWELL_FLAG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FINISH_LOCAL_DWELL_UNIT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FINISH_LOCAL_END_EVENTS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FINISH_LOCAL_END_EVENTS_FLAG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FINISH_LOCAL_FREQUENCY - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FINISH_LOCAL_LOWER_LIMIT_DISTANCE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FINISH_LOCAL_LOWER_LIMIT_MODE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FINISH_LOCAL_LOWER_LIMIT_PERCENT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FINISH_LOCAL_LOWER_LIMIT_TIME - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FINISH_LOCAL_MODE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FINISH_LOCAL_NO_OF_PASSES - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FINISH_LOCAL_OPERATOR_MSG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FINISH_LOCAL_OPERATOR_MSG_TOG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FINISH_LOCAL_OPSKIP - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FINISH_LOCAL_OPSTOP - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FINISH_LOCAL_RET_PT_STATUS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FINISH_LOCAL_RTN_ORDER - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FINISH_LOCAL_RTN_PT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FINISH_LOCAL_START_EVENTS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FINISH_LOCAL_START_EVENTS_FLAG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FINISH_LOCAL_STOP - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FINISH_LOCAL_TIME - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FINISH_LOCAL_UPPER_LIMIT_DISTANCE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FINISH_LOCAL_UPPER_LIMIT_PERCENT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FINISH_LOCAL_UPPER_LIMIT_TIME - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FINISH_MACHINING_SEQUENCE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FINISH_NO_OF_PASSES - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FINISH_NO_OF_PASSES_ARRAY - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FINISH_OMIT_REVERSALS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FINISH_OVERLAP - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FINISH_OVERLAP_PERCENT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FINISH_OVERLAP_UNIT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FINISH_SPRING_PASSES - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FINISH_STATUS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FINISH_STOP_AT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FINISH_STOP_AT_PERCENT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FINISH_STOP_AT_TAG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FINISH_STOP_AT_TOG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FINISH_STOP_AT_UNIT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FP_AXIAL - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FP_RADIAL - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FP_TAG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FP_TOG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FROM_DIA - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_FROM_FACES - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_HEEL_ANG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_IGNORE_MIN_BORING_DIA - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_LEAD_ANG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_LEVEL_STEP_ANGLE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_LEVEL_STEP_ANGLE_TAG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_LOCAL_ADJUSTMENT_FLAG_INDEX - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_LOCAL_ADJUSTMENT_MODE_INDEX - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_LOCAL_DISTANCE_INDEX - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_LOCAL_DWELL - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_LOCAL_DWELL_FLAG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_LOCAL_DWELL_UNIT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_LOCAL_END_EVENTS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_LOCAL_END_EVENTS_FLAG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_LOCAL_FREQUENCY - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_LOCAL_FREQUENCY_MODE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_LOCAL_LOCAL_RET_PT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_LOCAL_LOWER_LIMIT_DISTANCE_INDEX - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_LOCAL_LOWER_LIMIT_MODE_INDEX - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_LOCAL_LOWER_LIMIT_PERCENT_INDEX - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_LOCAL_LOWER_LIMIT_TIME_INDEX - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_LOCAL_MODE_INDEX - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_LOCAL_NO_OF_PASSES_INDEX - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_LOCAL_OPERATOR_MSG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_LOCAL_OPERATOR_MSG_TOG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_LOCAL_OPSKIP - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_LOCAL_OPSTOP - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_LOCAL_START_EVENTS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_LOCAL_START_EVENTS_FLAG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_LOCAL_STOP - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_LOCAL_TIME_INDEX - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_LOCAL_UPPER_LIMIT_DISTANCE_INDEX - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_LOCAL_UPPER_LIMIT_MODE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_LOCAL_UPPER_LIMIT_PERCENT_INDEX - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_LOCAL_UPPER_LIMIT_TIME_INDEX - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_MACH_ADDITIONAL - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_MACH_ADJUST - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_MACH_ADJUST_2 - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_MACH_ADJUST_2_TOG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_MACH_ADJUST_TOG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_MACH_AT_NOSE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_MACH_AUTOSWITCH - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_MACH_CUTCOM - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_MACH_CUTCOM_2 - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_MACH_CUTCOM_2_TOG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_MACH_CUTCOM_TOG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_MACH_FLIP_A_AXIS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_MACH_INIT_TRACK - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_MACH_MOTION - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_MACH_TL_ANGLE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_MACH_TL_ANGLE_TOG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_MACH_TL_HOLDER_ANGLE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_MACH_TL_RADIUS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_MACH_TL_RADIUS_TOG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_MACH_USE_A_AXIS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_MACH_USE_B_AXIS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_MACH_USE_MACHINE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_MAXIMUM - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_MIN_AREA - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_MIN_AREA_TOG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_MIN_CLEARANCE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_MIN_DEPTH - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_MIN_DEPTH_TOG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_MIN_LENGTH - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_MIN_LENGTH_TOG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_MINIMUM - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_MULTIPLE_CUT_REGIONS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_MULTIPLE_CUT_REGIONS_TOG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_NO_OF_ADD_PASSES - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_NO_OF_LEVELS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_NO_OF_PASSES_ARRAY - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_NORMAL_DIST_RAD - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_NORMAL_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_OMIT_REVERSALS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_PROFILING - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_PROFILING_OVERRIDE_AUTODETECT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_RELIEF_PLUNGE_TOG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_RELIEF_PLUNGE_UNIT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_REMOVAL_INC_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_REMOVAL_METHOD - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_RET_1PLUNGE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_RET_1PLUNGE_ANGLE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_RET_1PLUNGE_AUTOTOG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_RET_1PLUNGE_DISTANCE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_RET_1PLUNGE_VECTOR - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_RET_FROM_TRIMPOINT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_RET_LEVEL_BLANK - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_RET_LEVEL_BLANK_ANGLE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_RET_LEVEL_BLANK_AUTOTOG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_RET_LEVEL_BLANK_DISTANCE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_RET_LEVEL_BLANK_EXTEND - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_RET_LEVEL_BLANK_POINT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_RET_LEVEL_BLANK_RADIUS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_RET_LEVEL_BLANK_VECTOR - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_RET_LEVEL_PART - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_RET_LEVEL_PART_ANGLE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_RET_LEVEL_PART_AUTOTOG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_RET_LEVEL_PART_DISTANCE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_RET_LEVEL_PART_POINT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_RET_LEVEL_PART_RADIUS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_RET_LEVEL_PART_VECTOR - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_RET_PLUNGE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_RET_PLUNGE_ANGLE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_RET_PLUNGE_AUTOTOG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_RET_PLUNGE_DISTANCE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_RET_PLUNGE_VECTOR - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_RET_PROFILING - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_RET_PROFILING_ANGLE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_RET_PROFILING_AUTOTOG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_RET_PROFILING_DISTANCE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_RET_PROFILING_EXTEND - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_RET_PROFILING_POINT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_RET_PROFILING_RADIUS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_RET_PROFILING_VECTOR - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_REVERSAL_MODE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_ROOT_OFFSET - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_SAFE_DISTANCE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_SHALLOW_ANGLE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_SHALLOW_DIST_RAD - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_SHALLOW_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_SPINDLE_STOP - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_START_ANGLE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_START_OFFSET - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_STEP_VALUE_UNIT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_STEPOVER - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_STOCK_B_EQUI - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_STOCK_B_FACE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_STOCK_B_RAD - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_STOCK_F_EQUI - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_STOCK_F_FACE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_STOCK_F_RAD - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_SURFACE_SENSITIVITY - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_SURFACE_SENSITIVITY_TOG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_TANG_EXTENSION - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_TOL_OFFSET_BEFORE_CONTAINMENT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_TRACKING_CHANGE_ACTIVATION_DISTANCE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_TRACKING_CHANGE_IN_ROUGHING_TOG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_TRACKING_CHANGE_MIN_CUT_LENGTH - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_TRIM_AXIAL1_TAG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_TRIM_AXIAL1_TOG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_TRIM_AXIAL1_VAL - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_TRIM_AXIAL2_TAG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_TRIM_AXIAL2_TOG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_TRIM_AXIAL2_VAL - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_TRIM_POINT1_ANGLE_OFFSET - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_TRIM_POINT1_ANGLE_TAG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_TRIM_POINT1_ANGLE_TOG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_TRIM_POINT1_ANGLE_VAL - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_TRIM_POINT1_EXTEND_TOG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_TRIM_POINT1_EXTEND_VAL - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_TRIM_POINT1_TAG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_TRIM_POINT1_TOG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_TRIM_POINT2_ANGLE_OFFSET - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_TRIM_POINT2_ANGLE_TAG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_TRIM_POINT2_ANGLE_TOG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_TRIM_POINT2_ANGLE_VAL - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_TRIM_POINT2_EXTEND_TOG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_TRIM_POINT2_EXTEND_VAL - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_TRIM_POINT2_TAG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_TRIM_POINT2_TOG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_TRIM_RADIAL1_TAG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_TRIM_RADIAL1_TOG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_TRIM_RADIAL1_VAL - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_TRIM_RADIAL2_TAG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_TRIM_RADIAL2_TOG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_TRIM_RADIAL2_VAL - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_UNDERCUT_TOG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_UPDATE_IPW - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_WALL_DISTANCE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_WALL_DISTANCE_PERCENT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_WORKPIECE_AUTO_POS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_WORKPIECE_DIAMETER - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_WORKPIECE_DIRECTION - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_WORKPIECE_INNER_DIAMETER - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_WORKPIECE_LENGTH - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_WORKPIECE_LOC_TAG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_WORKPIECE_SRC_LOC_TAG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_WORKPIECE_STOCK_EQUI - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_WORKPIECE_STOCK_FACE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_WORKPIECE_STOCK_RADIAL - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_TURN_WORKPIECE_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_UNCUT_DISPLAY - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_UNCUT_OVERLAP_DIST - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_USE_AUX_FLOOR_MULTIPASS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_USE_PREVIOUS_IPW - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_USE_QUERY - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_USE_USER_DEFINED_TP - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_USER_DEFINED_TP - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_VALLEY_MERGE_DIST - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_VALLEY_OVERLAP_DIST - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_VALLEY_STEEP_ANGLE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_VAR_INCR - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_VERTICAL_LIMIT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_WALL_INCREMENT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_WALL_NUMBER_PASSES - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_WALL_STEP_METHOD - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_WALL_STOCK_OFFSET - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_WEDM_APPROACH_WITH_WIRE_TOGGLE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_WEDM_BACKBURN_DIST - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_WEDM_CUT_DIR - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_WEDM_CUTCOM_OFF_POSITION - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_WEDM_CUTCOM_REGISTER_POSITION - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_WEDM_CUTOFF_DIST - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_WEDM_CUTOFF_STOCK - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_WEDM_DEPART_WITH_WIRE_TOGGLE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_WEDM_FEED_OUTPUT_METHOD - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_WEDM_FEED_OUTPUT_UNIT_TOGGLE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_WEDM_LEADIN_ANG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_WEDM_LEADIN_CIR_ANG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_WEDM_LEADIN_CUTCOM_ANG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_WEDM_LEADIN_CUTCOM_DIST - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_WEDM_LEADIN_DIST - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_WEDM_LEADIN_METHOD - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_WEDM_LEADIN_POINT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_WEDM_LEADIN_POINT_TOGGLE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_WEDM_LEADIN_RAD - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_WEDM_LEADOUT_ANG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_WEDM_LEADOUT_CIR_ANG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_WEDM_LEADOUT_CUTCOM_ANG - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_WEDM_LEADOUT_CUTCOM_DIST - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_WEDM_LEADOUT_DIST - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_WEDM_LEADOUT_METHOD - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_WEDM_LEADOUT_POINT - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_WEDM_LEADOUT_POINT_TOGGLE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_WEDM_LEADOUT_RAD - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_WEDM_LEADOUT_SAME_AS_LEADIN_TOGGLE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_WEDM_LOWER_PLANE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_WEDM_MULTIPLE_CUTOFF_OR_BACKBURN_PASSES_METHOD - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_WEDM_MULTIPLE_CUTOFF_OR_BACKBURN_PASSES_TOGGLE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_WEDM_NOCORE_STOCK - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_WEDM_NON_TILT_LEADIN_TOGGLE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_WEDM_OUTPUT_CUTCOM_OFF_TOGGLE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_WEDM_OVERLAP_TOGGLE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_WEDM_RETRACT_TOOL_AXIS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_WEDM_SMOOTH_LEAD_IN_DIST - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_WEDM_SMOOTH_LEAD_IN_TOGGLE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_WEDM_SMOOTH_LEAD_OUT_DIST - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_WEDM_SMOOTH_LEAD_OUT_TOGGLE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_WEDM_STOP_DIST - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_WEDM_STOP_METHOD - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_WEDM_STOP_POINT_TOGGLE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_WEDM_THREAD_TOOL_AXIS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_WEDM_TRAVERSAL_METHOD - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_WEDM_UPPER_PLANE - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_WEDM_WIRE_POSITION - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_WITH_RADIUS - Static variable in class nxopen.uf.UFConstants
-
- UF_PARAM_Z_DEPTH_OFFSET - Static variable in class nxopen.uf.UFConstants
-
- UF_parameter_type - Static variable in class nxopen.uf.UFConstants
-
- UF_parametric_text_type - Static variable in class nxopen.uf.UFConstants
-
- UF_parm_aero_sheet_metal_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_parm_annotation_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_parm_attr_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_parm_autopopulate_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_parm_cae_ideal_main_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_parm_cae_post_main_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_parm_cae_so_manager_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_parm_caeabs_main_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_parm_caemodl_body_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_parm_caemodl_edge_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_parm_caemodl_face_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_parm_caemodl_region_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_parm_caemodl_vertex_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_parm_caemodl_volume_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_parm_calculator_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_parm_crvtr_disp_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_parm_diagram_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_parm_dimensions_data_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_parm_display_data_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_parm_drafting_automation_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_parm_drawing_control - Static variable in class nxopen.uf.UFConstants
-
- UF_parm_drawings_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_parm_drill_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_parm_field_main_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_parm_flex_pcb_design_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_parm_follow_pocket_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_parm_font_table_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_parm_ftk_function_main_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_parm_gfem_femcom - Static variable in class nxopen.uf.UFConstants
-
- UF_parm_gfem_poscom - Static variable in class nxopen.uf.UFConstants
-
- UF_parm_global_set_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_parm_hidden_line_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_parm_imported_jt_data_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_parm_jack_env_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_parm_kanji_data_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_parm_kmc_main_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_parm_ladder_diagram_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_parm_lathe_finish_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_parm_lathe_global_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_parm_lathe_groove_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_parm_lathe_rough_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_parm_lathe_thread_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_parm_layer_data_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_parm_layout2d_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_parm_line_machining_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_parm_mach_global_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_parm_main_agent_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_parm_main_assy_fem_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_parm_main_fem_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_parm_main_sim_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_parm_member_view_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_parm_menu_table_data_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_parm_mill_global_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_parm_model_bounds_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_parm_modeling_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_parm_navigation_data_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_parm_parts_list_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_parm_pirate_data_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_parm_pmi_data_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_parm_point_to_point_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_parm_profile_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_parm_rapid_proto_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_parm_retain_ann_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_parm_rough_to_depth_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_parm_schematics_data_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_parm_section_line_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_parm_section_list_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_parm_sfem_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_parm_sheet_metal_design_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_parm_sheet_metal_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_parm_ship_bodyref - Static variable in class nxopen.uf.UFConstants
-
- UF_parm_ship_building_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_parm_ship_rootobject - Static variable in class nxopen.uf.UFConstants
-
- UF_parm_sketch_tol_data_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_parm_solid_color_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_parm_solid_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_parm_student_edition_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_parm_surf_contour_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_parm_tabular_note_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_parm_ug_data_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_parm_units_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_parm_wizard_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_parm_zig_zag_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_part_attribute_cache_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_part_attribute_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_part_attribute_type - Static variable in class nxopen.uf.UFConstants
-
- UF_PART_CDP_BEGIN_TEXT - Static variable in class nxopen.uf.UFConstants
-
- UF_PART_CDP_CONTAIN_TEXT - Static variable in class nxopen.uf.UFConstants
-
- UF_PART_CDP_END_TEXT - Static variable in class nxopen.uf.UFConstants
-
- UF_PART_CDP_EXACT_TEXT - Static variable in class nxopen.uf.UFConstants
-
- UF_PART_cleanup_all - Static variable in class nxopen.uf.UFConstants
-
- UF_PART_cleanup_all_groups - Static variable in class nxopen.uf.UFConstants
-
- UF_PART_cleanup_assembly_constraints - Static variable in class nxopen.uf.UFConstants
-
- UF_PART_cleanup_CAM_cleanup - Static variable in class nxopen.uf.UFConstants
-
- UF_PART_cleanup_delete_all_materials - Static variable in class nxopen.uf.UFConstants
-
- UF_PART_cleanup_delete_broken_interpart - Static variable in class nxopen.uf.UFConstants
-
- UF_PART_cleanup_delete_duplicate_lights - Static variable in class nxopen.uf.UFConstants
-
- UF_PART_cleanup_delete_invalid_attributes - Static variable in class nxopen.uf.UFConstants
-
- UF_PART_cleanup_drafting - Static variable in class nxopen.uf.UFConstants
-
- UF_PART_cleanup_feature - Static variable in class nxopen.uf.UFConstants
-
- UF_PART_cleanup_fonts - Static variable in class nxopen.uf.UFConstants
-
- UF_PART_cleanup_highlight - Static variable in class nxopen.uf.UFConstants
-
- UF_PART_cleanup_hwo_force_demoting - Static variable in class nxopen.uf.UFConstants
-
- UF_PART_cleanup_mating - Static variable in class nxopen.uf.UFConstants
-
- UF_PART_cleanup_occurrences - Static variable in class nxopen.uf.UFConstants
-
- UF_PART_cleanup_parts_all - Static variable in class nxopen.uf.UFConstants
-
- UF_PART_cleanup_parts_components - Static variable in class nxopen.uf.UFConstants
-
- UF_PART_cleanup_routing - Static variable in class nxopen.uf.UFConstants
-
- UF_PART_cleanup_sketch - Static variable in class nxopen.uf.UFConstants
-
- UF_PART_cleanup_spreadsheet - Static variable in class nxopen.uf.UFConstants
-
- UF_PART_cleanup_unnamed_groups - Static variable in class nxopen.uf.UFConstants
-
- UF_PART_cleanup_unreferenced - Static variable in class nxopen.uf.UFConstants
-
- UF_PART_cleanup_unreferenced_exps - Static variable in class nxopen.uf.UFConstants
-
- UF_PART_cleanup_visual_editor - Static variable in class nxopen.uf.UFConstants
-
- UF_PART_ENGLISH - Static variable in class nxopen.uf.UFConstants
-
- UF_PART_err_read_only_modified - Static variable in class nxopen.uf.UFConstants
-
- UF_PART_ERROR_BASE - Static variable in class nxopen.uf.UFConstants
-
- UF_part_field_connectivity_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_part_field_depvariable_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_part_field_expression_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_part_field_formula_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_part_field_link_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_part_field_links_table_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_part_field_reference_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_part_field_table_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_part_field_type - Static variable in class nxopen.uf.UFConstants
-
- UF_PART_METRIC - Static variable in class nxopen.uf.UFConstants
-
- UF_part_occurrence_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_PART_warn_objects_not_copied - Static variable in class nxopen.uf.UFConstants
-
- UF_parts_list_cell_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_parts_list_column_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_parts_list_row_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_parts_list_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_PATH_BAD_INPUT - Static variable in class nxopen.uf.UFConstants
-
- UF_path_udem_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_pattern_definition_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_pattern_definition_type - Static variable in class nxopen.uf.UFConstants
-
- UF_pattern_point_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_pattern_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_pattern_type - Static variable in class nxopen.uf.UFConstants
-
- UF_pdm_design_feature_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_pdm_design_feature_type - Static variable in class nxopen.uf.UFConstants
-
- UF_perpendicular_constraint_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_perpendicular_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_phys_material_type - Static variable in class nxopen.uf.UFConstants
-
- UF_plane_type - Static variable in class nxopen.uf.UFConstants
-
- UF_PLIST_AS_DEFINED - Static variable in class nxopen.uf.UFConstants
-
- UF_PLIST_MULTIPLE - Static variable in class nxopen.uf.UFConstants
-
- UF_PLIST_SINGLE - Static variable in class nxopen.uf.UFConstants
-
- UF_PLOT_ERR_BANNERMSG - Static variable in class nxopen.uf.UFConstants
-
- UF_PLOT_ERR_CREATE - Static variable in class nxopen.uf.UFConstants
-
- UF_PLOT_ERR_DRAWING - Static variable in class nxopen.uf.UFConstants
-
- UF_PLOT_ERR_EMPTY_LAYOUT - Static variable in class nxopen.uf.UFConstants
-
- UF_PLOT_ERR_JOBNAME - Static variable in class nxopen.uf.UFConstants
-
- UF_PLOT_ERR_MODE - Static variable in class nxopen.uf.UFConstants
-
- UF_PLOT_ERR_NO_DRAWING_SHEET_COLORS - Static variable in class nxopen.uf.UFConstants
-
- UF_PLOT_ERR_NO_DRAWING_SHEET_WIDTHS - Static variable in class nxopen.uf.UFConstants
-
- UF_PLOT_ERR_NODE - Static variable in class nxopen.uf.UFConstants
-
- UF_PLOT_ERR_NOFILE - Static variable in class nxopen.uf.UFConstants
-
- UF_PLOT_ERR_NOQUEUES - Static variable in class nxopen.uf.UFConstants
-
- UF_PLOT_ERR_NOTACTV - Static variable in class nxopen.uf.UFConstants
-
- UF_PLOT_ERR_OPEN - Static variable in class nxopen.uf.UFConstants
-
- UF_PLOT_ERR_OPTION - Static variable in class nxopen.uf.UFConstants
-
- UF_PLOT_ERR_PAUSEMSG - Static variable in class nxopen.uf.UFConstants
-
- UF_PLOT_ERR_PDAEMON - Static variable in class nxopen.uf.UFConstants
-
- UF_PLOT_ERR_PENTYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_PLOT_ERR_PLOT - Static variable in class nxopen.uf.UFConstants
-
- UF_PLOT_ERR_PLOTTER - Static variable in class nxopen.uf.UFConstants
-
- UF_PLOT_ERR_QNOTFOUND - Static variable in class nxopen.uf.UFConstants
-
- UF_PLOT_ERR_READING_CDF - Static variable in class nxopen.uf.UFConstants
-
- UF_PLOT_ERR_READING_WDF - Static variable in class nxopen.uf.UFConstants
-
- UF_PLOT_ERR_ROT - Static variable in class nxopen.uf.UFConstants
-
- UF_PLOT_ERR_SCALE - Static variable in class nxopen.uf.UFConstants
-
- UF_PLOT_ERR_TOLER - Static variable in class nxopen.uf.UFConstants
-
- UF_PLOT_ERR_WRITE_CDF - Static variable in class nxopen.uf.UFConstants
-
- UF_PLOT_ERR_WRITE_WDF - Static variable in class nxopen.uf.UFConstants
-
- UF_PLOT_MAX_COLORS - Static variable in class nxopen.uf.UFConstants
-
- UF_PLOT_MAX_NAME_SIZE - Static variable in class nxopen.uf.UFConstants
-
- UF_PLOT_MAX_STRING_SIZE - Static variable in class nxopen.uf.UFConstants
-
- UF_PLOT_MAX_WIDTHS - Static variable in class nxopen.uf.UFConstants
-
- UF_PLOT_NO_FAVORITE - Static variable in class nxopen.uf.UFConstants
-
- UF_PLOT_NOT_CUSTOM_WIDTH - Static variable in class nxopen.uf.UFConstants
-
- UF_PLOT_WIDTH_1 - Static variable in class nxopen.uf.UFConstants
-
- UF_PLOT_WIDTH_2 - Static variable in class nxopen.uf.UFConstants
-
- UF_PLOT_WIDTH_3 - Static variable in class nxopen.uf.UFConstants
-
- UF_PLOT_WIDTH_4 - Static variable in class nxopen.uf.UFConstants
-
- UF_PLOT_WIDTH_5 - Static variable in class nxopen.uf.UFConstants
-
- UF_PLOT_WIDTH_6 - Static variable in class nxopen.uf.UFConstants
-
- UF_PLOT_WIDTH_7 - Static variable in class nxopen.uf.UFConstants
-
- UF_PLOT_WIDTH_8 - Static variable in class nxopen.uf.UFConstants
-
- UF_PLOT_WIDTH_9 - Static variable in class nxopen.uf.UFConstants
-
- UF_PLOT_width_by_color - Static variable in class nxopen.uf.UFConstants
-
- UF_PLOT_width_by_width - Static variable in class nxopen.uf.UFConstants
-
- UF_PLOT_width_custom - Static variable in class nxopen.uf.UFConstants
-
- UF_PLOT_WIDTH_NORMAL - Static variable in class nxopen.uf.UFConstants
-
- UF_PLOT_width_single - Static variable in class nxopen.uf.UFConstants
-
- UF_PLOT_width_single_t - Static variable in class nxopen.uf.UFConstants
-
- UF_PLOT_width_std - Static variable in class nxopen.uf.UFConstants
-
- UF_PLOT_WIDTH_THICK - Static variable in class nxopen.uf.UFConstants
-
- UF_PLOT_WIDTH_THIN - Static variable in class nxopen.uf.UFConstants
-
- UF_PLOT_width_use_t - Static variable in class nxopen.uf.UFConstants
-
- UF_PLOT_width_user - Static variable in class nxopen.uf.UFConstants
-
- UF_pmi_associated_objects_group_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_pmi_filter_all_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_pmi_filter_by_type_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_pmi_filter_by_view_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_pmi_filter_type - Static variable in class nxopen.uf.UFConstants
-
- UF_point_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_point_type - Static variable in class nxopen.uf.UFConstants
-
- UF_position_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_prefix1_type - Static variable in class nxopen.uf.UFConstants
-
- UF_prefix_type - Static variable in class nxopen.uf.UFConstants
-
- UF_probe_tracking_point_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_PROCESS_AID_DATUM_COUNT - Static variable in class nxopen.uf.UFConstants
-
- UF_PROCESS_AID_WELD_COUNT - Static variable in class nxopen.uf.UFConstants
-
- UF_product_interface_collection_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_product_interface_expression_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_product_interface_geometry_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_product_interface_type - Static variable in class nxopen.uf.UFConstants
-
- UF_promotion_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_promotion_type - Static variable in class nxopen.uf.UFConstants
-
- UF_PS_DISABLED - Static variable in class nxopen.uf.UFConstants
-
- UF_PS_ENABLED - Static variable in class nxopen.uf.UFConstants
-
- UF_pseudo_CAE_element - Static variable in class nxopen.uf.UFConstants
-
- UF_pseudo_CAE_node - Static variable in class nxopen.uf.UFConstants
-
- UF_pseudo_CAE_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_pseudo_object_type - Static variable in class nxopen.uf.UFConstants
-
- UF_pure_reference_pattern_definition_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_ra_sensor_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_ra_strain_gage_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_radius_constraint_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_rectangular_area_instance_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_reference_attribute_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_reference_cam_task_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_reference_cam_template_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_reference_design_lightweight_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_reference_design_model_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_reference_design_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_reference_flat_pattern_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_reference_parameter_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_reference_pattern_definition_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_reference_set_type - Static variable in class nxopen.uf.UFConstants
-
- UF_reference_tool_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_reference_type - Static variable in class nxopen.uf.UFConstants
-
- UF_render_set_type - Static variable in class nxopen.uf.UFConstants
-
- UF_report_entity_type - Static variable in class nxopen.uf.UFConstants
-
- UF_report_entry_entity_type - Static variable in class nxopen.uf.UFConstants
-
- UF_report_net_list_type - Static variable in class nxopen.uf.UFConstants
-
- UF_report_parts_list_entry_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_report_parts_list_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_report_scenario_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_report_type - Static variable in class nxopen.uf.UFConstants
-
- UF_response_simulation_type - Static variable in class nxopen.uf.UFConstants
-
- UF_RESULT_FILE_NAME_CONFLICT - Static variable in class nxopen.uf.UFConstants
-
- UF_rigid_constraint_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_ALL_ROUTED - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_ALL_TYPES - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_ALL_UNROUTED - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_ASCENDING_SORT - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_BLANK - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_CABLE_DEFAULT - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_CABLE_FLD_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_CABLE_LENGTH_DEFAULT - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_CABLE_LOCATION_FLD_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_CABLE_TYPE_FLD_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_CFG_FILE_EXTENSION - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_CMP_FILE_EXTENSION - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_COLOR_FLD_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_COLOR_RGB_FLD_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_COMP_DEFAULT - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_COMP_FLD_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_COMP_ID_CHARX_TITLE - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_COMP_LIST_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_COMP_MATCH_ATTRIBUTE - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_COMP_MATCH_METHOD - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_COMP_NAME_FLD_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_COMP_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_COMPONENT_DETAIL - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_CONDUCTOR_GUID_FLD_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_CONDUIT_PART_NUMBER_DEFAULT - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_CONDUIT_PART_NUMBER_FLD_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_CONN_ID_DEFAULT - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_CONN_ID_FLD_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_CONN_LIST_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_CONN_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_COV_THK_DEFAULT - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_COV_THK_FLD_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_CREATE_TERMINALS - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_CROSS_SECTION_DEFAULT - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_CROSS_SECTION_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_CUT_LENGTH_DEFAULT - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_CUT_LENGTH_FLD_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_DEFAULT_HRN_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_DEFAULT_JUMPER_LEN - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_DESCENDING_SORT - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_ELEC_COMP_GUID_FLD_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_err_acomp_blanked - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_err_acomp_duplicate_uids - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_err_acomp_empty_refset - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_err_acomp_missing_in_list - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_err_acomp_missing_in_prt - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_err_acomp_not_loaded - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_err_acomp_part_mismatch - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_err_acomp_uid_mismatch - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_err_alloc_dup_fld - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_err_array_len_mismatch - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_err_assign_comp_to_list - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_err_auto_route_error - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_err_bad_cfg_file - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_err_bad_record_format - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_err_broken_loop - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_err_cannot_create_list_record - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_err_comp_assigned - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_err_comp_missing_in_prt - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_err_comp_missing_info - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_err_comps_not_found - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_err_conn_harness_mismatch - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_err_conn_invalid_route - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_err_conn_invalid_tag - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_err_conn_length_mismatch - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_err_conn_missing_info - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_err_conn_stock_mismatch - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_err_dup_col_order - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_err_dup_comp_list - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_err_dup_conn_list - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_err_dup_filter - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_err_dup_fld_name - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_err_dup_fmt_fld - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_err_dup_format - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_err_dup_sort_order - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_err_dup_unique_ids - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_err_dup_wire_ids - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_err_fmbd_dup_unique_ids - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_err_fmbd_dup_wire_ids - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_err_from_comps_not_found - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_err_from_port_has_connection - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_err_from_ports_not_found - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_err_invalid_col_order - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_err_invalid_col_width - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_err_invalid_file_type - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_err_invalid_filt_clause - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_err_invalid_fmt_fld - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_err_invalid_int_comps - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_err_invalid_list_line - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_err_invalid_name - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_err_invalid_num_parms - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_err_invalid_sec_line - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_err_invalid_sort_order - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_err_invalid_stock_style - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_err_invalid_type - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_err_list_and_cfg_file - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_err_load_xml_routelist - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_err_manual_route_error - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_err_manual_route_exists - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_err_max_error - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_err_multiple_lists - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_err_no_list_section - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_err_no_name_or_clause - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_err_no_path_thru_int_comps - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_err_no_route_list_fmt - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_err_no_unique_id - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_err_opening_file - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_err_path_not_found - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_err_path_seg_invalid_fill_percen - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_err_path_seg_locked_fill_percen_reached - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_err_ports_not_found - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_err_sdata_not_found - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_err_to_comps_not_found - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_err_to_port_has_connection - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_err_to_ports_not_found - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_err_unq_path_not_found - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_err_unroute_error - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_err_write_xml_filters - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_err_write_xml_routelist - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_ERROR_BASE - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_FABRICATION_DEFAULT - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_FABRICATION_FLD_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_FILE_FMT_TYPE_COMMA - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_FILE_FMT_TYPE_SPACE - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_FILE_FMT_TYPE_STEP - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_FILE_FMT_TYPE_STR_COMMA - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_FILE_FMT_TYPE_STR_SPACE - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_FILE_FMT_TYPE_STR_STEP - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_FILE_FMT_TYPE_STR_XML - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_FILE_FMT_TYPE_XML - Static variable in class nxopen.uf.UFConstants
-
- UF_rlist_filter_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_FLD_FMT_STR_DOUBLE - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_FLD_FMT_STR_INT - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_FLD_FMT_STR_STRING - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_FLD_FMT_STR_TAG - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_FLD_FMT_TBL_DOUBLE - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_FLD_FMT_TBL_INT - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_FLD_FMT_TBL_STRING - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_FLD_FMT_TBL_TAG - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_FLD_FMT_TYPE_DOUBLE - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_FLD_FMT_TYPE_INT - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_FLD_FMT_TYPE_STRING - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_FLD_FMT_TYPE_TAG - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_FLD_FMT_TYPE_UNUSED - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_FLD_FMT_WIDTH_DOUBLE - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_FLD_FMT_WIDTH_INT - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_FLD_FMT_WIDTH_MAX - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_FLD_FMT_WIDTH_STRING - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_FLD_FMT_WIDTH_TAG - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_FLD_MOVE_LEFT - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_FLD_MOVE_NOWHERE - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_FLD_MOVE_RIGHT - Static variable in class nxopen.uf.UFConstants
-
- UF_rlist_format_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_FROM_COMP_DEFAULT - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_FROM_COMP_FLD_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_FROM_CONN_DEFAULT - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_FROM_CONN_FLD_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_FROM_PORT_DEFAULT - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_FROM_PORT_FLD_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_GAUGE_FLD_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_HEIGHT_DEFAULT - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_HEIGHT_FLD_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_HIGHLIGHT_WIRE_STOCK - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_HRN_FILE_EXTENSION - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_HRN_OVERRIDE - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_INT_COMP_FLD_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_INT_CONN_FLD_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_INT_PORT_FLD_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_JUMPER_WIRE_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_LENGTH_DEFAULT - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_LENGTH_FLD_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_LINEAR_DENSITY_FLD_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_rlist_list_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_LOAD_ALL_LIST_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_LOAD_ALL_OBJS - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_LOAD_COMP_LIST_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_LOAD_CONN_LIST_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_LOAD_FILTER_OBJS - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_LOAD_FORMAT_OBJS - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_LOAD_LIST_OBJS - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_LOCATION_FLD_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_MATCH_STRING_FLD_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_MATERIAL_NAME_FLD_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_MATERIAL_TYPE_FLD_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_MAX_LEN_ALLOWED_FLD_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_MAX_LIST_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_MIN_BEND_RAD_FLD_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_MIN_LEN_ALLOWED_FLD_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_MIXED_DETAIL - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_MULTIPLIER_DEFAULT - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_MULTIPLIER_FLD_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_MULTIPORT_DETAIL - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_NAME_FLD_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_NORMAL_WIRE_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_NUM_INT_COMPS_DEFAULT - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_NUM_INT_COMPS_FLD_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_OCCUR_AUTO - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_OCCUR_FALSE - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_OCCUR_FLD_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_OCCUR_MANUAL - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_OCCUR_PROXY - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_OCCUR_TRUE - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_OD_DEFAULT - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_OD_FLD_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_OFFSET_DEFAULT - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_OFFSET_FLD_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_PARENT_RECORD_FLD_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_PART_NAME_DEFAULT - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_PART_NAME_FLD_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_PART_NUMBER_FLD_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_PARTIAL_DETAIL - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_PORT_ID_CHARX_TITLE - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_PRODUCT_ID_FLD_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_RECORD_EXPORT_ALL - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_RECORD_EXPORT_SELECTED - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_RECORD_GUID_FLD_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_RECORD_IMPORT_ALL - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_RECORD_IMPORT_REPLACE - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_RECORD_IMPORT_UNIQUE - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_REFERENCED_DEVICE_GUID_FLD_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_ROUTE_CABLE_FLD_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_ROUTE_DEFAULT - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_ROUTE_FLD_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_ROUTE_WIRE_TYPE_DEFAULT - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_ROUTE_WIRE_TYPE_FLD_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_ROUTED_AUTO - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_ROUTED_COMPONENT - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_ROUTED_FALSE - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_ROUTED_FLD_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_ROUTED_LEVEL_DEFAULT - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_ROUTED_LEVEL_FLD_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_ROUTED_MANUAL - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_ROUTED_MIXED - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_ROUTED_PARTIAL - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_ROUTED_PIN - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_ROUTED_TRUE - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_ROUTING_DESIGN - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_RPT_ROUTE_ERRS - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_SELECTED - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_SEPARATION_FLD_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_SHIELDING_FLD_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_SIGNAL_FLD_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_SPACING_FLD_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_SPECIFIED_TYPES - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_STOCK_DATA_FLD_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_STOCK_DEFAULT - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_STOCK_FLD_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_SYSTEM_FLD_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_TERMINALS_DETAIL - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_TO_COMP_DEFAULT - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_TO_COMP_FLD_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_TO_CONN_DEFAULT - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_TO_CONN_FLD_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_TO_PORT_DEFAULT - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_TO_PORT_FLD_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_rlist_type - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_TYPE_DEFAULT - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_UNBLANK - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_UNIQUE_ID_DEFAULT - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_UNIQUE_ID_FLD_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_WIDTH_DEFAULT - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_WIDTH_FLD_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_WIRE_CLASS_FLD_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_WIRE_SPACE_DEFAULT - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_WIRE_SPACE_FLD_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_WIRE_TYPE_FLD_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_WIZ_RECORD_DEFAULT - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_WIZ_RECORD_FLD_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_RLIST_XML_FILE_EXTENSION - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_ANGLE_STR - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_AV_CORNERS_NONE - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_AV_CURVES_NONE - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_AV_UNITS_IN - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_AV_UNITS_MM - Static variable in class nxopen.uf.UFConstants
-
- UF_route_bend_corner_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_route_built_in_path_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_route_cable_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_CB_REASON_ASSIGN_STOCK - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_CB_REASON_BROKEN_CONNECTION - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_CB_REASON_CHOOSE_PART - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_CB_REASON_COPY_PATH - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_CB_REASON_CREATE_CONNECTION - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_CB_REASON_CREATE_PORT_CONNECTION - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_CB_REASON_CREATE_RUN - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_CB_REASON_DELETE_PATH - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_CB_REASON_EDIT_CONNECTION - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_CB_REASON_MOVE_PART - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_CB_REASON_MOVE_PATH - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_CB_REASON_OFFSET_PATH - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_CB_REASON_PLACE_PART - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_CB_REASON_REMOVE_PART - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_CB_REASON_REPLACE_PART - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_CB_REASON_REPLACE_STOCK - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_CB_REASON_RUN_PRE_DELETE - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_CB_REASON_TRANSFORM_PATH - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_CB_REASON_UNASSIGN_STOCK - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_CB_REASON_UNKNOWN - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_CB_REASON_WIRE_COMP_AUTO - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_CB_REASON_WIRE_COMP_MANUAL - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_CB_REASON_WIRE_COMP_PROXY - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_CB_REASON_WIRE_ROUTE_AUTO - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_CB_REASON_WIRE_ROUTE_MANUAL - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_CB_REASON_WIRE_TERMINALS - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_CB_REASON_WIRE_UNCOMP - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_CB_REASON_WIRE_UNROUTE - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_CHARX_EXPR_err_num_eq_eq - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_CHARX_EXPR_err_num_eq_none - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_CHARX_EXPR_err_num_eq_rel - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_CHARX_EXPR_err_num_eq_str - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_CHARX_EXPR_err_num_none - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_CHARX_EXPR_err_num_num_eq - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_CHARX_EXPR_err_num_num_num - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_CHARX_EXPR_err_num_num_rel - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_CHARX_EXPR_err_num_num_str - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_CHARX_EXPR_err_num_range_eq - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_CHARX_EXPR_err_num_range_range - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_CHARX_EXPR_err_num_range_rel - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_CHARX_EXPR_err_num_range_str - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_CHARX_EXPR_err_num_rel_eq - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_CHARX_EXPR_err_num_rel_none - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_CHARX_EXPR_err_num_rel_range - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_CHARX_EXPR_err_num_rel_rel - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_CHARX_EXPR_err_num_rel_str - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_CHARX_EXPR_err_num_str - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_CHARX_EXPR_err_str_eq_eq - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_CHARX_EXPR_err_str_eq_none - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_CHARX_EXPR_err_str_eq_rel - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_CHARX_EXPR_err_str_none - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_CHARX_EXPR_err_str_quote_eq - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_CHARX_EXPR_err_str_quote_quote - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_CHARX_EXPR_err_str_quote_rel - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_CHARX_EXPR_err_str_quote_str - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_CHARX_EXPR_err_str_rel_rel - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_CHARX_EXPR_err_str_str_eq - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_CHARX_EXPR_err_str_str_quote - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_CHARX_EXPR_err_str_str_rel - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_CHARX_EXPR_err_str_str_str - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_CHARX_EXPR_unknown - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_CHARX_TYPE_ANY - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_CHARX_TYPE_ANY_REF - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_CHARX_TYPE_INT - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_CHARX_TYPE_INT_EXPR - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_CHARX_TYPE_REAL - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_CHARX_TYPE_REAL_EXPR - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_CHARX_TYPE_REF - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_CHARX_TYPE_STR - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_CHARX_TYPE_STR_EXPR - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_CHARX_TYPE_UNKNOWN - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_CLASS_STR - Static variable in class nxopen.uf.UFConstants
-
- UF_route_connection_type - Static variable in class nxopen.uf.UFConstants
-
- UF_route_control_point_type - Static variable in class nxopen.uf.UFConstants
-
- UF_route_cope_corner_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_CORNER_BEND - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_CORNER_BEND_TABLE - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_CORNER_COPE - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_CORNER_MITER - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_CORNER_NONE - Static variable in class nxopen.uf.UFConstants
-
- UF_route_corner_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_route_corner_type - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_CREATE_ALL_TERMINALS - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_CREATE_LISTED_TERMINALS - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_CREATE_ROUTED_TERMINALS - Static variable in class nxopen.uf.UFConstants
-
- UF_route_cross_section_type - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_CUT_BACK_LENGTH_CHARX_TITLE - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_DEFAULT_LEVEL - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_DEFAULT_PLATFORM_GRATE_SYMBOL_NAME_STR - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_DESCRIPTION_STR - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_DIAMETER_STR - Static variable in class nxopen.uf.UFConstants
-
- UF_route_disc_corner_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_DR_DELETE_OPTION_DO_DELETE - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_DR_DELETE_OPTION_DONT_DELETE - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_DR_MODE_BATCH - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_DR_MODE_CONCURRENT - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_DR_MODE_INTERACTIVE - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_DR_REASON_ASSIGN_CORNER - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_DR_REASON_ASSIGN_STOCK - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_DR_REASON_AUTO_ROUTE_COMP - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_DR_REASON_AUTO_ROUTE_PIN - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_DR_REASON_BATCH - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_DR_REASON_COPY_PATH - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_DR_REASON_CREATE_FAB - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_DR_REASON_CREATE_PATH - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_DR_REASON_CREATE_PLATFORM - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_DR_REASON_DELETE_PATH - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_DR_REASON_EDIT_CHARX - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_DR_REASON_HEAL_PATH - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_DR_REASON_IMPORT - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_DR_REASON_INTERACTIVE - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_DR_REASON_MANUAL_ROUTE_COMP - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_DR_REASON_MANUAL_ROUTE_PIN - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_DR_REASON_MOVE_PART - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_DR_REASON_MOVE_PATH - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_DR_REASON_OFFSET_PATH - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_DR_REASON_ORIENT_STOCK - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_DR_REASON_PARTIAL_AUTO_ROUTE - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_DR_REASON_PARTIAL_MANUAL_ROUTE - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_DR_REASON_PLACE_PART - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_DR_REASON_QUALIFY_PART - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_DR_REASON_REMOVE_PART - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_DR_REASON_REMOVE_STOCK - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_DR_REASON_SIMPLIFY_PATH - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_DR_REASON_SPACE_RESERVATION - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_DR_REASON_STOCK_STYLE - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_DR_REASON_SUBDIVIDE_SEG - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_DR_REASON_TRANSFORM_PATH - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_DR_REASON_UNIFY_PATH - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_DR_REASON_UNKNOWN - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_DR_REASON_WIND_CATCHER - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_all_charx_not_deleted - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_bad_bend_radius - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_bad_bend_ratio - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_bad_crn_object - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_bad_discipline - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_bad_down_direction - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_bad_gen_charx_typ - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_bad_gen_syn_charx_typ - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_bad_obj_sdata - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_bad_parameter_1 - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_bad_parameter_2 - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_bad_parameter_3 - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_bad_parameter_4 - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_bad_parameter_5 - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_bad_parameter_6 - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_bad_rcp - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_bad_rte_charx_typ - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_bad_rte_syn_charx_typ - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_bad_specification - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_bend_at_bend - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_bend_fillet_error - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_bend_on_follow - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_body_outside_other_body - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_brt_invalid_file - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_brt_invalid_table - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_brt_no_diameter_entry - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_brt_no_table_entry - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_brt_warning_in_table - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_cannot_copy - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_cannot_create_rout_plist - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_cannot_write_to_occ - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_cant_determine_rad - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_cant_find_pl_format_file - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_cant_import_pl_format_file - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_cfi_error - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_charx_count - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_charx_not_found - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_charx_object - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_charx_oper - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_charx_title - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_charx_type - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_connection_in_multiple_harnesses - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_copying_to_dcm3_part - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_copying_to_non_dcm3_part - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_create_fmbd_failure - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_crnr_segs_tangent - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_cross_secn_style - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_data_not_loaded - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_dcm3_spline_failure - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_dr_file_not_found - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_entities_not_supported - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_excess_cut_back_length - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_fmbd_data_failure - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_fold_creation_fail - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_heal_invalid_ext - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_heal_invalid_pos - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_heal_num_pos - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_heal_parallel_vecs - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_intersection_at_bend - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_invalid_cope_crn - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_invalid_corner_type - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_invalid_dr_mode - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_invalid_entity_data - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_invalid_num_pieces - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_invalid_piece_len - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_invalid_placer_type - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_invalid_port_mate - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_invalid_rcp_crnr - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_invalid_route_end - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_invalid_route_start - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_invalid_weight_units - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_kinked_flex - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_length_beyond_end - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_length_beyond_path_end - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_load_app_view - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_load_part_lib_view - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_load_part_table - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_marked_as_no_report - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_max - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_member_not_found - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_mult_stk_for_ratio - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_neg_bend_radius - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_neg_cut_back_length - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_neg_engagement - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_neg_extension - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_negative_end_offset - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_negative_gap_length - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_negative_start_offset - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_no_app_view - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_no_bolt_charx - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_no_bolt_udo_created - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_no_builder - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_no_charx_for_object - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_no_charx_on_port - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_no_class - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_no_common_req_charx - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_no_continuous_path - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_no_cross_section - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_no_cut_elbow_name_generated - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_no_elbow_ang - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_no_electrical_data_in_file - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_no_explicit_path - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_no_fab_created - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_no_flange_conn_data - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_no_free_space_around_point - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_no_gasket_charx - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_no_gasket_udo_created - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_no_mass_assertion - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_no_nut_udo_created - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_no_part - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_no_part_families - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_no_part_name_attr - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_no_path_between_points - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_no_path_found - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_no_rout_plist_exist - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_no_segments_in_path - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_no_stkdata_found - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_no_stock_data - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_no_stock_for_ratio - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_no_user_pref - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_no_weld_ring_assigned - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_no_weld_ring_charx - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_no_weld_ring_pref - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_no_weld_ring_udo - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_node_not_found - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_not_a_preference - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_not_enough_points_for_qp - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_null_pointer - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_out_of_range - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_plmxml_invalid_file - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_plmxml_no_electrical_data - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_prev19_stock - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_program_error - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_rcp_is_not_occ - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_rcurve_end_assoc - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_rcurve_end_ext - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_rcurve_end_loc - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_rcurve_end_slope - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_rcurve_start_assoc - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_rcurve_start_ext - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_rcurve_start_loc - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_rcurve_start_slope - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_root_and_work_diff - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_same_values - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_seg_stock_mismatch - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_segment_endpoints_not_at_rcp - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_sheet_bodies_in_different_plane - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_start_beyond_end - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_stock_convert - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_stock_has_no_diam - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_stock_import - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_stock_prt_not_found - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_subseg_bad_segment - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_subseg_bcorner_seg - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_subseg_big_arclen - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_subseg_curve_dir - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_subseg_end_pct - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_subseg_neg_arclen - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_subseg_neg_chordal - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_subseg_neg_numseg - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_subseg_neg_ratio - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_subseg_pct_order - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_subseg_screen_point - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_subseg_start_pct - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_subseg_wrong_method - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_syntax_error - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_table_not_loaded - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_terminal_already_exists - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_terminal_not_found - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_too_many_paths - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_transition_sweep_failure - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_unable_deref_charx - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_unify_nochange - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_unimplemented_interface - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_unimplemented_method - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_unknown - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_unknown_overstock_type - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_unknown_segset_method - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_up_invalid_type - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_wrong_entity_type - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_zero_cut_back_length - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_zero_length_path - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_err_zero_length_segment - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_ERROR_BASE - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_EXTENSION_LENGTH_CHARX_TITLE - Static variable in class nxopen.uf.UFConstants
-
- UF_route_filler_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_route_fitting_overstock_type - Static variable in class nxopen.uf.UFConstants
-
- UF_route_harness_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_HEAL_METHOD_DIRECT - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_HEAL_METHOD_INTERSECT - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_HEAL_METHOD_XYZ - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_HEAL_METHOD_XZY - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_HEAL_METHOD_YXZ - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_HEAL_METHOD_YZX - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_HEAL_METHOD_ZXY - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_HEAL_METHOD_ZYX - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_INSLEN_STR - Static variable in class nxopen.uf.UFConstants
-
- UF_route_jumper_wire_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_LENGTH_CHARX_TITLE - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_LENGTH_STR - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_LIBRARY_TYPE_EXTERNAL - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_LIBRARY_TYPE_FILE_SELECT - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_LIBRARY_TYPE_VIEW - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_MATERIAL_STR - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_MEMBER_NAME_STR - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_MIN_BEND_RATIO - Static variable in class nxopen.uf.UFConstants
-
- UF_route_miter_corner_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_NPS_BRANCH_STR - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_NPS_OUT_STR - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_NPS_STR - Static variable in class nxopen.uf.UFConstants
-
- UF_route_overstock_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_OVERSTOCK_WRAPPED_LENGTH_CHARX_TITLE - Static variable in class nxopen.uf.UFConstants
-
- UF_route_part_anchor_type - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_PART_FILE_NAME_STR - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_PART_NUMBER_STR - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_PART_TYPE_CONNECTOR - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_PART_TYPE_DEVICE - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_PART_TYPE_FABRICATION - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_PART_TYPE_FILLER - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_PART_TYPE_LOGICAL - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_PART_TYPE_OVERSTOCK - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_PART_TYPE_PART - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_PART_TYPE_SPLICE - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_PART_TYPE_STOCK - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_PART_TYPE_STOCK_COMPONENT - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_PART_TYPE_TEMPLATE_ASSY - Static variable in class nxopen.uf.UFConstants
-
- UF_route_part_type_type - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_PART_TYPE_UNKNOWN - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_PART_TYPE_WIRE_COMPONENT - Static variable in class nxopen.uf.UFConstants
-
- UF_route_path_fmbd_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_route_path_offset_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_route_path_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_route_port_type - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_PROXY_PORT_CHARX - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_RATING_STR - Static variable in class nxopen.uf.UFConstants
-
- UF_route_route_type - Static variable in class nxopen.uf.UFConstants
-
- UF_route_sbend_corner_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_SCHEDULE_STR - Static variable in class nxopen.uf.UFConstants
-
- UF_route_segment_set_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_route_segment_type - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_SI_TYPE_GRIP - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_SI_TYPE_INTERNAL - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_SI_TYPE_PROGRAM_NOWAIT - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_SI_TYPE_PROGRAM_WAIT - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_SI_TYPE_UFUNC - Static variable in class nxopen.uf.UFConstants
-
- UF_route_stock_data_type - Static variable in class nxopen.uf.UFConstants
-
- UF_route_stock_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_route_stock_transition_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_route_stock_type - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_str_invalid_route_end - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_str_invalid_route_start - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_STYLE_DETAIL - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_STYLE_NONE - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_STYLE_SIMPLE - Static variable in class nxopen.uf.UFConstants
-
- UF_route_subroute_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_SYMBOL_NAME_STR - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_THICKNESS_STR - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_USER_PREF_TYPE_ANY - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_USER_PREF_TYPE_DBL - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_USER_PREF_TYPE_DBL_ARRAY - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_USER_PREF_TYPE_INT - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_USER_PREF_TYPE_INT_ARRAY - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_USER_PREF_TYPE_STR - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_USER_PREF_TYPE_STR_ARRAY - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_WEIGHT_UNITS_STR - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_WEIGHT_VALUE_STR - Static variable in class nxopen.uf.UFConstants
-
- UF_ROUTE_WIDTH_STR - Static variable in class nxopen.uf.UFConstants
-
- UF_route_wire_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_RULE_CURRENT_TIME_STAMP - Static variable in class nxopen.uf.UFConstants
-
- UF_ruled_surface_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_ruled_surface_type - Static variable in class nxopen.uf.UFConstants
-
- UF_SC_ALLOW_CURVES - Static variable in class nxopen.uf.UFConstants
-
- UF_SC_ALLOW_POINTS - Static variable in class nxopen.uf.UFConstants
-
- UF_SC_BODY_DUMB_BODIES - Static variable in class nxopen.uf.UFConstants
-
- UF_SC_BODY_FEATURE_BODIES - Static variable in class nxopen.uf.UFConstants
-
- UF_SC_BODY_GROUP_BODIES - Static variable in class nxopen.uf.UFConstants
-
- UF_SC_CURVE_APPARENT_CHAINING - Static variable in class nxopen.uf.UFConstants
-
- UF_SC_CURVE_DUMB_CURVES - Static variable in class nxopen.uf.UFConstants
-
- UF_SC_CURVE_FEAT_CHAIN_CURVES - Static variable in class nxopen.uf.UFConstants
-
- UF_SC_CURVE_FEAT_POINTS - Static variable in class nxopen.uf.UFConstants
-
- UF_SC_CURVE_FEAT_TANGENT_CURVES - Static variable in class nxopen.uf.UFConstants
-
- UF_SC_CURVE_FEATURE_CURVES - Static variable in class nxopen.uf.UFConstants
-
- UF_SC_CURVE_FOLLOW_FILLET_CURVES - Static variable in class nxopen.uf.UFConstants
-
- UF_SC_CURVE_GROUP_CURVES - Static variable in class nxopen.uf.UFConstants
-
- UF_SC_CURVE_REGION_BOUNDARY - Static variable in class nxopen.uf.UFConstants
-
- UF_SC_EDGE_BODY_EDGES - Static variable in class nxopen.uf.UFConstants
-
- UF_SC_EDGE_BOUNDARY_EDGES - Static variable in class nxopen.uf.UFConstants
-
- UF_SC_EDGE_CHAIN_EDGES - Static variable in class nxopen.uf.UFConstants
-
- UF_SC_EDGE_DUMB_EDGES - Static variable in class nxopen.uf.UFConstants
-
- UF_SC_EDGE_FACE_EDGES - Static variable in class nxopen.uf.UFConstants
-
- UF_SC_EDGE_FEATURE_EDGES - Static variable in class nxopen.uf.UFConstants
-
- UF_SC_EDGE_FEATURE_INTERSECTION_EDGES - Static variable in class nxopen.uf.UFConstants
-
- UF_SC_EDGE_INTERSECT_EDGES - Static variable in class nxopen.uf.UFConstants
-
- UF_SC_EDGE_MSEEDTAN_EDGES - Static variable in class nxopen.uf.UFConstants
-
- UF_SC_EDGE_MULTI_SEED_OUTER_FACE_EDGES - Static variable in class nxopen.uf.UFConstants
-
- UF_SC_EDGE_SHBNDARY_EDGES - Static variable in class nxopen.uf.UFConstants
-
- UF_SC_EDGE_TANGENT_EDGES - Static variable in class nxopen.uf.UFConstants
-
- UF_SC_EDGE_VERTEX_EDGES - Static variable in class nxopen.uf.UFConstants
-
- UF_SC_EDGE_VERTEX_TANGENT_EDGES - Static variable in class nxopen.uf.UFConstants
-
- UF_SC_FACE_ADJACENT_FACES - Static variable in class nxopen.uf.UFConstants
-
- UF_SC_FACE_ALL_BLEND_FACES - Static variable in class nxopen.uf.UFConstants
-
- UF_SC_FACE_BODY_FACES - Static variable in class nxopen.uf.UFConstants
-
- UF_SC_FACE_BOSS_POCKET_FACES - Static variable in class nxopen.uf.UFConstants
-
- UF_SC_FACE_CONNECTED_BLEND_FACES - Static variable in class nxopen.uf.UFConstants
-
- UF_SC_FACE_DUMB_FACES - Static variable in class nxopen.uf.UFConstants
-
- UF_SC_FACE_FACE_AND_ADJACENT_FACES - Static variable in class nxopen.uf.UFConstants
-
- UF_SC_FACE_FEATURE_FACES - Static variable in class nxopen.uf.UFConstants
-
- UF_SC_FACE_MERGED_RIB_FACES - Static variable in class nxopen.uf.UFConstants
-
- UF_SC_FACE_REGION_BOUNDARY_FACES - Static variable in class nxopen.uf.UFConstants
-
- UF_SC_FACE_REGION_FACES - Static variable in class nxopen.uf.UFConstants
-
- UF_SC_FACE_RIB_FACES - Static variable in class nxopen.uf.UFConstants
-
- UF_SC_FACE_SLOT_FACES - Static variable in class nxopen.uf.UFConstants
-
- UF_SC_FACE_TANGENT_FACES - Static variable in class nxopen.uf.UFConstants
-
- UF_SC_INVALID_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_SC_MAX_BODY - Static variable in class nxopen.uf.UFConstants
-
- UF_SC_MAX_CURVES - Static variable in class nxopen.uf.UFConstants
-
- UF_SC_MAX_EDGES - Static variable in class nxopen.uf.UFConstants
-
- UF_SC_MAX_FACES - Static variable in class nxopen.uf.UFConstants
-
- UF_SC_UNINITIALIZED - Static variable in class nxopen.uf.UFConstants
-
- UF_scalar_attribute_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_scalar_type - Static variable in class nxopen.uf.UFConstants
-
- UF_SCAO_NO_REFS_IN_SCAO_PARMS - Static variable in class nxopen.uf.UFConstants
-
- UF_SCAO_NO_UF_SCAO_PARMS - Static variable in class nxopen.uf.UFConstants
-
- UF_SCAO_NOT_SCAO_OBJECT - Static variable in class nxopen.uf.UFConstants
-
- UF_SCAO_OBJECT_CREATE_FAILED - Static variable in class nxopen.uf.UFConstants
-
- UF_SCAO_OBJECT_EDIT_FAILED - Static variable in class nxopen.uf.UFConstants
-
- UF_script_type - Static variable in class nxopen.uf.UFConstants
-
- UF_sculptured_surface_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_sculptured_surface_type - Static variable in class nxopen.uf.UFConstants
-
- UF_section_edge_0_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_section_edge_1_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_section_edge_type - Static variable in class nxopen.uf.UFConstants
-
- UF_section_line_type - Static variable in class nxopen.uf.UFConstants
-
- UF_section_segment_type - Static variable in class nxopen.uf.UFConstants
-
- UF_set_program_name - Static variable in class nxopen.uf.UFConstants
-
- UF_SETUP_ERROR_USE_NEW_POST_FUNCTION - Static variable in class nxopen.uf.UFConstants
-
- UF_SF__MAX_EXP_TAGS - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_ABAQUS_ALL_STEPS_SUPPRESSEd - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_ABAQUS_BC_CONFLICTS - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_ABAQUS_ENV_VAR_ERROR - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_ABAQUS_INVALID_SOLVE_OPTION - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_ABAQUS_NO_STEPS_DEFINED - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_ABAQUS_SUBMIT_ERROR - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_ANALYSIS_MODEL_EXISTS - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_ASKED_NAME_NOT_FOUND - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_ASKED_PROPERTY_NOT_FOUND - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_AUTO_SUBDIVIDE_FAILED - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_BC_CONFLICTS_FOUND - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_BLANK_MATERIAL_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_BLANK_SECTION_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_CLC_UNABLE_TO_CREATE - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_CLC_UNABLE_TO_DELETE - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_CONNECTION_CONFLICT - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_CONTACT_ELEMENT - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_CONTACT_SPRING_ELEMENT - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_ELM_TYPE_BAD - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_extend_matl_aniso_G1 - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_extend_matl_aniso_G2 - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_extend_matl_aniso_thermal_coeff - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_extend_matl_aniso_thermal_conduct1 - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_extend_matl_aniso_thermal_conduct2 - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_extend_matl_ortho_poissons_ratio - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_extend_matl_ortho_shear_modulus - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_extend_matl_ortho_thermal_coeff - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_extend_matl_ortho_thermal_conduct - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_extend_matl_ortho_youngs_modulus - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_FAILED - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_FAILED_TO_ASK_ASSEMBLY_MESH - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_FAILED_TO_AUTOCREATE_MMC - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_FAILED_TO_CREATE_ASSEMBLY_MESH - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_FAILED_TO_CREATE_CONSTRAINT - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_FAILED_TO_CREATE_LOAD - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_FAILED_TO_CREATE_MIDSURFACE - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_FAILED_TO_CREATE_OFFSET - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_FAILED_TO_CREATE_ORIENTATION - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_FAILED_TO_DELETE_ASSEMBLY_MESH - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_FAILED_TO_EDIT_ASSEMBLY_MESH - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_FAILED_TO_EDIT_MIDSURFACE - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_FAILED_TO_LOCATE_ASSEMBLY_MESH - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_FREE_VALUE - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_GEOMETRY_TYPE_BAD - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_HPT_INVALID_GEOMETRY_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_HPT_INVALID_REFERENCE_PT - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_HPT_NO_GEOMETRY - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_INCOMPATIBLE_REGIONS - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_INCOMPATIBLE_SOLUTION - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_INCREASE_MERGE_TOLERANCE - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_INPUT_OBJECT_NOT_FROM_FEM - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_INSUFFICIENT_INFO_TO_CREATE_CSYS - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_INVALID_AM_MATCH_TOLERANCE - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_INVALID_AM_MERGE_TOLERANCE - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_INVALID_ASSEMBLY_GEOM_TAG - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_INVALID_ASSEMBLY_MESH_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_INVALID_ASSEMBLY_MESH_TAG - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_INVALID_ASSEMBLY_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_INVALID_DUPLICATE_ASSEMBLY_MESH - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_INVALID_DUPLICATE_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_INVALID_EDGE_MATCH_TOL - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_INVALID_FACE_TAG - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_INVALID_INPUT - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_INVALID_MATERIAL_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_INVALID_MATERIAL_NAME_LENGTH - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_INVALID_MATERIAL_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_INVALID_MATERIAL_VALUES - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_INVALID_NODE_UNIQUE_TOL - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_INVALID_ON_SURFACE_TOL - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_INVALID_PARAMETER - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_INVALID_PART_TAG - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_INVALID_SCRATCH_DIR - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_INVALID_SECTION_DIMENSIONS - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_INVALID_SECTION_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_INVALID_SECTION_NAME_LENGTH - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_INVALID_SMOOTHING_TOL - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_INVALID_TAG - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_INVALID_TARGET_GEOM_TAG - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_INVALID_TRANS_ROWS - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_ACTION_VAL_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_ALREADY_DEFINED - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_ALTERNATE_REP_ARRAY_VAL_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_ANALYSIS_AXISYM_STR - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_ANALYSIS_COUPLED_STR - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_ANALYSIS_FLOW_STR - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_ANALYSIS_LINEAR_STR - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_ANALYSIS_MAPPING_STR - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_ANALYSIS_NONLINEAR_STR - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_ANALYSIS_SIMPLE_STR - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_ANALYSIS_STEADY_STR - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_ANALYSIS_STRUCTURAL_STR - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_ANALYSIS_THERMAL_STR - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_ANSYS_AXIS - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_ANSYS_AXIS_LB - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_ANSYS_AXIS_LB_VER - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_ANSYS_AXIS_VER - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_ANSYS_MODAL - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_ANSYS_MODAL_VER - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_ANSYS_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_ANSYS_STR_SIMPLE - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_ANSYS_STR_SIMPLE_LB - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_ANSYS_STR_SIMPLE_LB_VER - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_ANSYS_STR_SIMPLE_VER - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_ANSYS_THERM_STR - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_ANSYS_THERM_STR_AXIS - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_ANSYS_THERM_STR_AXIS_VER - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_ANSYS_THERM_STR_VER - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_ANSYS_THERMAL - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_ANSYS_THERMAL_AXIS - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_ANSYS_THERMAL_AXIS_VER - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_ANSYS_THERMAL_VER - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_AXIS_VAL_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_BNDCOND_VAL_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_BOOL_VAL_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_CAE_SECTION_OFFSET_VAL_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_CAE_SECTION_ORIENT_VAL_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_CAE_SECTION_REF_VAL_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_CAE_SECTION_VAL_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_CATALOG_VAL_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_COORD_VAL_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_CURRENT - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_DIRPATH_VAL_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_DOF_VAL_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_DOFSETREF_VAL_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_EDGES_ON_FACE_VAL_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_ENUM_VAL_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_EXT_MENU_VAL_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_FEA_ADAPT_MODAL_SIMPLE - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_FEA_ADAPT_MODAL_SIMPLE_VER - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_FEA_ADAPT_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_FEA_ADAPT_STR_SIMPLE - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_FEA_ADAPT_STR_SIMPLE_VER - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_FIELD_VAL_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_FILENAME_VAL_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_GENERAL_FIELD_VAL_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_GROUPREF_VAL_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_INT_ARRAY_VAL_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_INT_VAL_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_IS_CURRENT - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_LBCREF_VAL_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_LOAD_VAL_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_MATERIAL_VAL_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_MATRIX_VAL_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_MAX_NAME_BUFSIZE - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_MAX_NAME_NCHARS - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_MSC_NASTRAN_AXIS - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_MSC_NASTRAN_AXIS_LB - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_MSC_NASTRAN_AXIS_LB_VER - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_MSC_NASTRAN_AXIS_VER - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_MSC_NASTRAN_MODAL - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_MSC_NASTRAN_MODAL_VER - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_MSC_NASTRAN_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_MSC_NASTRAN_NL_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_MSC_NASTRAN_STR_SIMPLE - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_MSC_NASTRAN_STR_SIMPLE_LB - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_MSC_NASTRAN_STR_SIMPLE_LB_VER - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_MSC_NASTRAN_STR_SIMPLE_NL - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_MSC_NASTRAN_STR_SIMPLE_NL_VER - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_MSC_NASTRAN_STR_SIMPLE_VER - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_MSC_NASTRAN_THERMAL - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_MSC_NASTRAN_THERMAL_AXIS - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_MSC_NASTRAN_THERMAL_AXIS_VER - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_MSC_NASTRAN_THERMAL_VER - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_MULTI_STRING_ITI_VAL_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_MULTI_STRING_VAL_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_NEUTRAL - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_NIL_VAL_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_NO_CURRENT - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_NOT_COMPLETE - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_NOT_DEFINED - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_NOT_DEFINED_OPTION - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_NOT_INITIALIZED - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_PHYSICAL_ARRAY_VAL_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_PLYMAT_VAL_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_POINT_VAL_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_PPT_VAL_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_REGION_VAL_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_SCALAR_ARRAY_VAL_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_SCALAR_FIELD_VAL_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_SCALAR_VAL_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_SECTION_VAL_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_SELECTREF_VAL_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_SFEM_VECTOR_VAL_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_SOLUTIONREF_VAL_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_SSMO_ARRAY_VAL_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_SSMO_VAL_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_TABLE_VAL_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_TARGETSET_VAL_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_TEXT_VAL_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_TIME_VAL_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_VECTOR_FIELD_VAL_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LANG_VECTOR_VAL_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_LEGEND_REAL_STR_SZ - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_MATERIAL_FAILED_TO_CREATE - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_MATERIAL_FAILED_TO_DELETE - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_MATERIAL_FAILED_TO_LINK - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_MATERIAL_FAILED_TO_UNLINK - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_MATERIAL_FAILED_TO_UPDATE - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_MAX_NAME_LENGTH - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_MAX_STRING_BUFSIZE - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_MAX_STRING_LEN - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_MAX_STRING_NCHARS - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_MESH_ALREADY_ON_GEOMETRY - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_MESH_DATA_BAD - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_MESH_DIMENSION_BAD - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_MESH_VISUAL_NO_CHANGE - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_MIDSRF_FACEPAIR_METHOD - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_MIDSRF_NON_EXIST - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_MIDSRF_OFFSET_METHOD - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_MIDSRF_USER_DEF_METHOD - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_NAS_ANA_S_AUTHFILE_VAR_NOT_FOUND - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_NAS_ANA_S_BOUNDARY_CONFLICTS - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_NAS_ANA_S_ENV_VAR_ERR - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_NAS_ANA_S_FORMAT_COMPLETE - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_NAS_ANA_S_SUBMIT_ERR - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_NO_ACTIVE_SOLUTION - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_NO_GEOMETRY_TO_MESH - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_NO_LOAD_CASE_FOUND - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_NO_MATERIAL_FOUND - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_NO_MESH_RECIPE - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_NO_SECTION_PROPERTY_FOUND - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_NO_SHELL_MESH_TO_SOLID - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_NON_ABAQUS_ENV - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_NON_SCENARIO_PART - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_NOT_INITIALIZED - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_NULL_TAG_NOT_ALLOWED - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_POST_DESC_SZ - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_POST_DSN_NM_SZ - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_POST_FILE_NM_SZ - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_POST_INVALID_MODEL - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_POST_INVALID_RESULTS_TYPES - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_POST_LIBRARY_NM_SZ - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_POST_MAX_STRING_LEN - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_POST_NO_RESULT_NUM - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_POST_RESULTS_NOT_FOUND - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_POST_STATE_NM_SZ - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_PROPERTY_NOT_FOUND - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_REGIONS_ON_SAME_BODY - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_REQUESTED_OBJECT_NOT_FOUND - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_SCENARIO_PART_NOT_FOUND - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_SECT_NO_MG - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_SECT_TYPE_BAD - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_SECTION_FAILED_TO_CREATE - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_SECTION_FAILED_TO_DELETE - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_SECTION_FAILED_TO_LINK - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_SECTION_FAILED_TO_UNLINK - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_SECTION_FAILED_TO_UPDATE - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_SECTION_UNINITIALIZED - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_STEP_INVALID_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_STEP_NAME_EXIST - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_UGS_MESH_ESIZE_LE_EDGE_MATCH_TOL - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_UGS_MESH_ESIZE_LE_TINY_EDGE_TOL - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_UGS_MESH_INVALID_ELEM_SIZE - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_UGS_MESH_INVALID_MAX_JACOBIAN - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_UGS_MESH_INVALID_MAX_QUAD_WARP - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_UGS_MESH_INVALID_METHOD_OPT - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_UGS_MESH_INVALID_MIDNODE_OPT - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_UGS_MESH_INVALID_MIN_FACE_ANGLE - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_UGS_MESH_INVALID_SURF_MESH_SIZE_VARIATION - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_UGS_MESH_INVALID_VOL_MESH_SIZE_VARIATION - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_UNABLE_TO_CREATE_COLLECTOR - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_UNKNOWN_PROPERTY_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_UPDATE_FAILURE - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_USER_DEFINED_TW_THICKNESS - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_VALIDATE_ALL_MESHES - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_VALIDATE_ELEM_ASSOCIATIVITY - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_VALIDATE_GEOM_CONSTRAINT_SATISFACTION - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_VALIDATE_MESH_ALL - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_VALIDATE_MESH_ASSOCIATIVITY - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_VALIDATE_MESH_RECIPES - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_VALIDATE_NODE_ASSOCIATIVITY - Static variable in class nxopen.uf.UFConstants
-
- UF_SF_VALIDATE_USER_DEFINED_ATTRIBUTES - Static variable in class nxopen.uf.UFConstants
-
- UF_sfem_2d_contact_mesh_recipe_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_sfem_bndcond_type - Static variable in class nxopen.uf.UFConstants
-
- UF_sfem_bolt_recipe_nut_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_sfem_bolt_recipe_spider_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_sfem_bolt_recipe_tap_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_sfem_composite_body_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_sfem_composite_edge_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_sfem_composite_face_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_sfem_composite_subedge_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_sfem_composite_subface_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_sfem_composite_type - Static variable in class nxopen.uf.UFConstants
-
- UF_sfem_composite_vertex_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_sfem_conn_weld_mesh_recipe_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_sfem_connection_mesh_recipe_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_sfem_connection_recipe_edge_edge_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_sfem_connection_recipe_edge_face_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_sfem_connection_recipe_point_edge_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_sfem_connection_recipe_point_face_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_sfem_connection_recipe_point_point_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_sfem_connection_recipe_type - Static variable in class nxopen.uf.UFConstants
-
- UF_sfem_dofset_type - Static variable in class nxopen.uf.UFConstants
-
- UF_sfem_generic_mesh_recipe_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_sfem_generic_mesh_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_sfem_generic_property_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_sfem_load_type - Static variable in class nxopen.uf.UFConstants
-
- UF_sfem_mat_property_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_sfem_mesh_geometry_body_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_sfem_mesh_geometry_comp_body_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_sfem_mesh_geometry_comp_edge_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_sfem_mesh_geometry_comp_face_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_sfem_mesh_geometry_curve_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_sfem_mesh_geometry_edge_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_sfem_mesh_geometry_face_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_sfem_mesh_geometry_point_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_sfem_mesh_geometry_type - Static variable in class nxopen.uf.UFConstants
-
- UF_sfem_mesh_nodes_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_sfem_mesh_recipe_type - Static variable in class nxopen.uf.UFConstants
-
- UF_sfem_mesh_type - Static variable in class nxopen.uf.UFConstants
-
- UF_sfem_nxbc_type - Static variable in class nxopen.uf.UFConstants
-
- UF_sfem_nxconstraint_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_sfem_nxload_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_sfem_nxssso_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_sfem_property_name_type - Static variable in class nxopen.uf.UFConstants
-
- UF_sfem_property_proxy_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_sfem_property_type - Static variable in class nxopen.uf.UFConstants
-
- UF_sfem_sect_property_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_sfem_super_element_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_sfem_trans_mesh_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_sfem_weld_connection_recipe_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_sfem_weld_mesh_recipe_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_SFFEA_ALGORITHM_NUM_TYPES - Static variable in class nxopen.uf.UFConstants
-
- UF_sfpp_post_def_edge_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_sfpp_post_def_face_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_sfpp_post_def_fringe_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_sfpp_post_display_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_sfpp_post_type - Static variable in class nxopen.uf.UFConstants
-
- UF_sfpp_post_undef_edge_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_sfpp_post_undef_face_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_SH_MAX_MAT_NAME_BUFSIZE - Static variable in class nxopen.uf.UFConstants
-
- UF_SH_MAX_MAT_NAME_NCHARS - Static variable in class nxopen.uf.UFConstants
-
- UF_SH_MAX_MAT_NAME_SIZE - Static variable in class nxopen.uf.UFConstants
-
- UF_shadow_part_occ_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_shaft_feature_type - Static variable in class nxopen.uf.UFConstants
-
- UF_shaft_load_type - Static variable in class nxopen.uf.UFConstants
-
- UF_shaft_section_type - Static variable in class nxopen.uf.UFConstants
-
- UF_shaft_stress_type - Static variable in class nxopen.uf.UFConstants
-
- UF_shaft_support_type - Static variable in class nxopen.uf.UFConstants
-
- UF_shaft_type - Static variable in class nxopen.uf.UFConstants
-
- UF_shed_material_type - Static variable in class nxopen.uf.UFConstants
-
- UF_sheet_group_type - Static variable in class nxopen.uf.UFConstants
-
- UF_sheet_metal_type - Static variable in class nxopen.uf.UFConstants
-
- UF_SIM_KIM_COMP_CLASS_MACHINE - Static variable in class nxopen.uf.UFConstants
-
- UF_SIM_KIM_COMP_CLASS_NONE - Static variable in class nxopen.uf.UFConstants
-
- UF_SIM_KIM_COMP_CLASS_POCKET - Static variable in class nxopen.uf.UFConstants
-
- UF_SIM_KIM_COMP_CLASS_TOOL - Static variable in class nxopen.uf.UFConstants
-
- UF_SIM_KIM_COMP_CLASS_TURRET - Static variable in class nxopen.uf.UFConstants
-
- UF_simple_section_line_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_simplified_group_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_single_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_skeleton_datum_plane_grid_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_skeleton_drawing_grid_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_skeleton_drawing_sheetzones_grid_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_skeleton_ent_type - Static variable in class nxopen.uf.UFConstants
-
- UF_skeleton_entity_selection_plane_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_skeleton_grid_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_skeleton_modeling_grid_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_skeleton_plane_grid_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_skeleton_shed_grid_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_skeleton_sketcher_grid_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_skeleton_wcs_display_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_skeleton_wind_bords_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_SKET_ALONG_CURVE - Static variable in class nxopen.uf.UFConstants
-
- UF_SKET_COLLINEAR - Static variable in class nxopen.uf.UFConstants
-
- UF_SKET_CONSTANT_ANGLES - Static variable in class nxopen.uf.UFConstants
-
- UF_SKET_CONSTANT_LENGTH_LINES - Static variable in class nxopen.uf.UFConstants
-
- UF_SKET_CONSTANT_OFFSETS - Static variable in class nxopen.uf.UFConstants
-
- UF_SKET_DATUM - Static variable in class nxopen.uf.UFConstants
-
- UF_SKET_EQUAL_LENGTH - Static variable in class nxopen.uf.UFConstants
-
- UF_SKET_EQUAL_RADIUS - Static variable in class nxopen.uf.UFConstants
-
- UF_SKET_EXTR_MULTI_SPLINES - Static variable in class nxopen.uf.UFConstants
-
- UF_SKET_EXTR_ORIG_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_SKET_EXTR_SINGLE_SPLINE - Static variable in class nxopen.uf.UFConstants
-
- UF_SKET_HORIZONTAL - Static variable in class nxopen.uf.UFConstants
-
- UF_SKET_HORIZONTAL_LINES - Static variable in class nxopen.uf.UFConstants
-
- UF_SKET_MAX_CON_TYPES - Static variable in class nxopen.uf.UFConstants
-
- UF_SKET_MAX_GEOMETRY_PER_CON - Static variable in class nxopen.uf.UFConstants
-
- UF_SKET_MIDPOINT_OF_CURVE - Static variable in class nxopen.uf.UFConstants
-
- UF_SKET_OPPOSITE_CURVE - Static variable in class nxopen.uf.UFConstants
-
- UF_SKET_OPPOSITE_NORMAL - Static variable in class nxopen.uf.UFConstants
-
- UF_SKET_PARALLEL - Static variable in class nxopen.uf.UFConstants
-
- UF_SKET_PERPENDICULAR - Static variable in class nxopen.uf.UFConstants
-
- UF_SKET_POINT_ON_CURVE - Static variable in class nxopen.uf.UFConstants
-
- UF_SKET_TANGENT_CURVES - Static variable in class nxopen.uf.UFConstants
-
- UF_SKET_VERTICAL - Static variable in class nxopen.uf.UFConstants
-
- UF_SKET_VERTICAL_LINES - Static variable in class nxopen.uf.UFConstants
-
- UF_SKET_WITH_NORMAL - Static variable in class nxopen.uf.UFConstants
-
- UF_sketch_1_var_equ_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_sketch_8_equ_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_sketch_arc_angle_var_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_sketch_arc_radius_var_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_sketch_bcurve_slope_var_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_sketch_circle_ep_var_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_sketch_dimension_equ_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_sketch_fixed_arc_angle_var_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_sketch_fixed_arc_radius_var_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_sketch_fixed_bcurve_slope_var_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_sketch_fixed_circle_ep_var_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_sketch_fixed_invisible_var_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_sketch_fixed_line_angle_var_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_sketch_fixed_line_slope_var_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_sketch_fixed_param_pnt_var_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_sketch_geo2_equ_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_sketch_geo_equ_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_sketch_header_equ_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_sketch_inferred_equ_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_sketch_invisible_var_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_sketch_line_angle_var_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_sketch_line_slope_var_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_sketch_param_pnt_var_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_sketch_ref_circle_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_sketch_ref_line_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_sketch_ref_spline_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_sketch_regular_equ_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_sketch_sym_equ_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_sketch_tol_csys_cyl_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_sketch_tol_csys_rect_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_sketch_tol_csys_spher_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_sketch_tol_csys_type - Static variable in class nxopen.uf.UFConstants
-
- UF_sketch_tol_equation_type - Static variable in class nxopen.uf.UFConstants
-
- UF_sketch_tol_feature_type - Static variable in class nxopen.uf.UFConstants
-
- UF_sketch_tol_mating_type - Static variable in class nxopen.uf.UFConstants
-
- UF_sketch_tol_output_reqst_type - Static variable in class nxopen.uf.UFConstants
-
- UF_sketch_tol_variable_type - Static variable in class nxopen.uf.UFConstants
-
- UF_sketch_type - Static variable in class nxopen.uf.UFConstants
-
- UF_smart_body_container_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_smart_container_type - Static variable in class nxopen.uf.UFConstants
-
- UF_smart_empty_container_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_smart_face_container_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_smart_mixed_container_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_smart_model_instance_mark_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_smart_model_instance_type - Static variable in class nxopen.uf.UFConstants
-
- UF_smart_sc_section_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_smart_unknown_container_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_smart_wireframe_container_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_SMD_ERR_NO_STDS_FILE_FOUND - Static variable in class nxopen.uf.UFConstants
-
- UF_SMD_ERR_NOT_INITIALIZED - Static variable in class nxopen.uf.UFConstants
-
- UF_SMD_ERR_TCL_EVAL - Static variable in class nxopen.uf.UFConstants
-
- UF_SMRT_MODEL_ERR_BUS_MODFR_EXISTS - Static variable in class nxopen.uf.UFConstants
-
- UF_SMRT_MODEL_ERR_BUSMODFR_TAG_INVALID - Static variable in class nxopen.uf.UFConstants
-
- UF_SMRT_MODEL_ERR_BUSMODFR_TITLE_INVALID - Static variable in class nxopen.uf.UFConstants
-
- UF_SMRT_MODEL_ERR_KF_OBJECT_NON_EXISTANT - Static variable in class nxopen.uf.UFConstants
-
- UF_smsp_business_modifier_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_smsp_drafting_attribute_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_SMSP_ERR_ATTR_NUMBER_INVALID - Static variable in class nxopen.uf.UFConstants
-
- UF_SMSP_ERR_EMARKING_ATTRIBUTE_EXISTS - Static variable in class nxopen.uf.UFConstants
-
- UF_SMSP_ERR_GEOM_NUMBER_INVALID - Static variable in class nxopen.uf.UFConstants
-
- UF_SMSP_ERR_INST_LEADER_NUM_INVALID - Static variable in class nxopen.uf.UFConstants
-
- UF_SMSP_ERR_INSTANCE_TAG_INVALID - Static variable in class nxopen.uf.UFConstants
-
- UF_SMSP_ERR_INVALID_ATTRIBUTE_SPECIFIED - Static variable in class nxopen.uf.UFConstants
-
- UF_SMSP_ERR_KBE_PRODUCT_DEFINITION - Static variable in class nxopen.uf.UFConstants
-
- UF_SMSP_ERR_NO_ATTRIBUTES_SPECIFIED - Static variable in class nxopen.uf.UFConstants
-
- UF_SMSP_ERR_NO_KLINK_OBJECT - Static variable in class nxopen.uf.UFConstants
-
- UF_SMSP_ERR_PD_GEOMETRY_TYPE_INVALID - Static variable in class nxopen.uf.UFConstants
-
- UF_SMSP_ERR_PD_INSTANCE_TYPE_INVALID - Static variable in class nxopen.uf.UFConstants
-
- UF_SMSP_ERR_PD_NAME_IN_USE - Static variable in class nxopen.uf.UFConstants
-
- UF_SMSP_ERR_PD_NAME_INVALID - Static variable in class nxopen.uf.UFConstants
-
- UF_SMSP_ERR_PD_TAG_INVALID - Static variable in class nxopen.uf.UFConstants
-
- UF_SMSP_ERR_PRODUCT_ATTRIBUTE_TYPE_INVALID - Static variable in class nxopen.uf.UFConstants
-
- UF_SMSP_ERR_PRODUCT_VALUE_TYPE_INVALID - Static variable in class nxopen.uf.UFConstants
-
- UF_smsp_group_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_SMSP_NO_ERROR - Static variable in class nxopen.uf.UFConstants
-
- UF_smsp_product_attribute_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_smsp_product_definition_geom_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_smsp_product_definition_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_smsp_product_definition_type - Static variable in class nxopen.uf.UFConstants
-
- UF_smsp_product_value_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_smsp_root_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_SO_ASK_ALL_CHILDREN - Static variable in class nxopen.uf.UFConstants
-
- UF_SO_ASK_ALL_PARENTS - Static variable in class nxopen.uf.UFConstants
-
- UF_SO_ASK_CHILDREN_RECURSIVELY - Static variable in class nxopen.uf.UFConstants
-
- UF_SO_ASK_EXP_PARENTS - Static variable in class nxopen.uf.UFConstants
-
- UF_SO_ASK_FEATURE_CHILDREN - Static variable in class nxopen.uf.UFConstants
-
- UF_SO_ASK_PARENTS_NOT_REFERENCING_SC - Static variable in class nxopen.uf.UFConstants
-
- UF_SO_ASK_PARENTS_RECURSIVELY - Static variable in class nxopen.uf.UFConstants
-
- UF_SO_ASK_PARENTS_REFERENCING_SC - Static variable in class nxopen.uf.UFConstants
-
- UF_SO_ASK_SO_CHILDREN - Static variable in class nxopen.uf.UFConstants
-
- UF_SO_ASK_SO_PARENTS - Static variable in class nxopen.uf.UFConstants
-
- UF_SO_ASK_UNLOADED_PARENTS - Static variable in class nxopen.uf.UFConstants
-
- UF_SO_ASK_WIREFRAME_PARENTS - Static variable in class nxopen.uf.UFConstants
-
- UF_SO_ERR_CANNOT_EDIT_SO - Static variable in class nxopen.uf.UFConstants
-
- UF_SO_HAS_DELETED_PARENT - Static variable in class nxopen.uf.UFConstants
-
- UF_SO_HAS_GOT_DUMB_PARENT - Static variable in class nxopen.uf.UFConstants
-
- UF_SO_HAS_OUT_OF_DATE_PARENT - Static variable in class nxopen.uf.UFConstants
-
- UF_SO_HAS_SLEEPY_PARENT - Static variable in class nxopen.uf.UFConstants
-
- UF_SO_HAS_SO_ERROR_PARENT - Static variable in class nxopen.uf.UFConstants
-
- UF_SO_HAS_UNLOADED_PARENT - Static variable in class nxopen.uf.UFConstants
-
- UF_SO_NO_STATUS - Static variable in class nxopen.uf.UFConstants
-
- UF_SO_STOP_RECURSIVE_AT_DISPLAYED_GEOMETRY - Static variable in class nxopen.uf.UFConstants
-
- UF_solid_body_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_solid_collection_type - Static variable in class nxopen.uf.UFConstants
-
- UF_solid_composite_type - Static variable in class nxopen.uf.UFConstants
-
- UF_solid_edge_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_solid_face_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_solid_foreign_surf_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_solid_in_view_type - Static variable in class nxopen.uf.UFConstants
-
- UF_solid_section_type - Static variable in class nxopen.uf.UFConstants
-
- UF_solid_silhouette_sl_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_solid_silhouette_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_solid_silhouette_type - Static variable in class nxopen.uf.UFConstants
-
- UF_solid_silhouette_uvhatch_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_solid_swept_body_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_solid_type - Static variable in class nxopen.uf.UFConstants
-
- UF_spcurve_closed_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_spcurve_open_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_spcurve_periodic_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_spcurve_type - Static variable in class nxopen.uf.UFConstants
-
- UF_sphere_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_sphere_type - Static variable in class nxopen.uf.UFConstants
-
- UF_spline_closed_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_spline_gear_cell_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_spline_gear_column_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_spline_gear_row_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_spline_gear_table_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_spline_open_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_spline_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_spline_type - Static variable in class nxopen.uf.UFConstants
-
- UF_spreadsheet_excel_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_spreadsheet_type - Static variable in class nxopen.uf.UFConstants
-
- UF_spreadsheet_xess_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_SSAO_CURVES_DISCONNECTED - Static variable in class nxopen.uf.UFConstants
-
- UF_SSAO_INVALID_MODE - Static variable in class nxopen.uf.UFConstants
-
- UF_SSAO_NOT_SSAO_OBJECT - Static variable in class nxopen.uf.UFConstants
-
- UF_SSAO_OBJECT_CREATION_FAILED - Static variable in class nxopen.uf.UFConstants
-
- UF_standard_tracking_point_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_STD_ACTIVEWEB_CREATE_ATTR - Static variable in class nxopen.uf.UFConstants
-
- UF_STD_ACTIVEWEB_ERASE_LOG - Static variable in class nxopen.uf.UFConstants
-
- UF_STD_ACTIVEWEB_MOVE_FILES - Static variable in class nxopen.uf.UFConstants
-
- UF_STD_ACTIVEWEB_NO_OPTIMIZE - Static variable in class nxopen.uf.UFConstants
-
- UF_STD_ACTIVEWEB_RECURSIVE - Static variable in class nxopen.uf.UFConstants
-
- UF_STD_ERR_INVALID_CSYS - Static variable in class nxopen.uf.UFConstants
-
- UF_STD_ERR_INVALID_HANDLE - Static variable in class nxopen.uf.UFConstants
-
- UF_STD_ERR_UNABLE_TO_FACETIZE - Static variable in class nxopen.uf.UFConstants
-
- UF_STD_ERR_UNSUITABLE_ENTITY - Static variable in class nxopen.uf.UFConstants
-
- UF_STD_ERR_USER_ABORT - Static variable in class nxopen.uf.UFConstants
-
- UF_STD_OUTPUT_ALLPARTS - Static variable in class nxopen.uf.UFConstants
-
- UF_STD_OUTPUT_BACKGROUND - Static variable in class nxopen.uf.UFConstants
-
- UF_STD_OUTPUT_FLYTHRU - Static variable in class nxopen.uf.UFConstants
-
- UF_STD_OUTPUT_LIGHTS - Static variable in class nxopen.uf.UFConstants
-
- UF_STD_OUTPUT_MATERIALS - Static variable in class nxopen.uf.UFConstants
-
- UF_STD_OUTPUT_MOTION_RESULTS - Static variable in class nxopen.uf.UFConstants
-
- UF_STD_OUTPUT_MULTIFILE - Static variable in class nxopen.uf.UFConstants
-
- UF_STD_OUTPUT_RECURSE - Static variable in class nxopen.uf.UFConstants
-
- UF_STD_OUTPUT_TEXTURES - Static variable in class nxopen.uf.UFConstants
-
- UF_STD_OUTPUT_VRML_2 - Static variable in class nxopen.uf.UFConstants
-
- UF_STD_SMOOTH_COARSE - Static variable in class nxopen.uf.UFConstants
-
- UF_STD_SMOOTH_FINE - Static variable in class nxopen.uf.UFConstants
-
- UF_STD_SMOOTH_MEDIUM - Static variable in class nxopen.uf.UFConstants
-
- UF_STD_STL_DISJOINT - Static variable in class nxopen.uf.UFConstants
-
- UF_STD_STL_FILE_TYPE_ASCII - Static variable in class nxopen.uf.UFConstants
-
- UF_STD_STL_FILE_TYPE_BINARY - Static variable in class nxopen.uf.UFConstants
-
- UF_STD_STL_FILE_TYPE_EXT_BINARY - Static variable in class nxopen.uf.UFConstants
-
- UF_STD_STL_FILE_TYPE_NONE - Static variable in class nxopen.uf.UFConstants
-
- UF_STD_STL_FILE_TYPE_UNSURE - Static variable in class nxopen.uf.UFConstants
-
- UF_STD_STL_MULTADJ - Static variable in class nxopen.uf.UFConstants
-
- UF_STD_STL_NEGSPACE - Static variable in class nxopen.uf.UFConstants
-
- UF_STD_STL_NOADJ - Static variable in class nxopen.uf.UFConstants
-
- UF_STD_STL_NOFACET - Static variable in class nxopen.uf.UFConstants
-
- UF_STD_UNITS_INCH - Static variable in class nxopen.uf.UFConstants
-
- UF_STD_UNITS_METER - Static variable in class nxopen.uf.UFConstants
-
- UF_STD_UNITS_MM - Static variable in class nxopen.uf.UFConstants
-
- UF_stepped_section_line_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_straightness_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_string_attribute_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_STUDIO_stybld_no_uf_data - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_ACTION_BUTTON_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_ACTIVATE_CB - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_ACTIVATE_REASON - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_ACTIVE_PAGE - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_APPLY_CB - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_APPLY_INDEX - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_APPLY_REASON - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_ATTACHMENTS - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_BACK_CB - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_BACK_INDEX - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_BACK_REASON - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_BEGIN_GROUP_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_BITMAP - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_BITMAP_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_BUTTON_LAYOUT_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_CANCEL_CB - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_CANCEL_INDEX - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_CANCEL_REASON - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_COLOR_TOOL_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_CONSTRUCT_REASON - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_CONSTRUCTOR_CB - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_DEFAULT_ACTION - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_DESTRUCT_REASON - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_DESTRUCTOR_CB - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_DIALOG_INDEX - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_DIALOG_RESIZE - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_DIALOG_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_DIALOG_WIDTH - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_DOUBLE_CLICK_CB - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_DOUBLE_CLICK_REASON - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_DRAG_CB - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_DRAG_REASON - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_END_GROUP_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_ENTER_FILE_OPERATION - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_EXIT_FILE_OPERATION - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_FILEOP_CB - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_FILEOP_REASON - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_FOCUS - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_INTEGER_PTR_VALUE - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_INTEGER_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_INTEGER_VALUE - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_INVALID_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_ITEM_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_LABEL - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_LABEL_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_LIST_DELETE - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_LIST_DESELECT - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_LIST_INSERT - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_LIST_SHOW - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_MAX_CB_TYPES - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_MULTI_LINE_TEXT_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_MULTI_LIST_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_NAV_INDEX - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_NO_ATTR - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_NO_CB - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_NO_INDEX - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_NO_REASON - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_NO_SUB_INDEX - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_NO_VALUE - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_NULL_OBJECT - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_OK_CB - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_OK_INDEX - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_OK_REASON - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_OPTION_MENU_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_OPTION_TOGGLE_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_OPTION_TOGGLE_VALUE - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_RADIO_BOX_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_REAL_PTR_VALUE - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_REAL_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_REAL_VALUE - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_SCALE_INTEGER_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_SCALE_LINE_INCREMENT - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_SCALE_PRECISION - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_SCALE_REAL_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_SCROLLED_WINDOW_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_SELECTION - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_SELECTION_BOX_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_SELECTION_VALUE - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_SENSITIVITY - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_SEPARATOR_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_SINGLE_LIST_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_STRING_PTR_VALUE - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_STRING_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_STRING_VALUE - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_SUBITEM_VALUES - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_SWITCH_CB - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_SWITCH_REASON - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_TOGGLE_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_TOOL_PALETTE_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_VALUE - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_VALUE_CHANGED_CB - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_VALUE_CHANGED_REASON - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_VISIBILITY - Static variable in class nxopen.uf.UFConstants
-
- UF_STYLER_WIDE_STRING_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_sub_entity_for_dim_type - Static variable in class nxopen.uf.UFConstants
-
- UF_subdivision_mesh_body_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_subdivision_mesh_edge_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_subdivision_mesh_face_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_subdivision_mesh_type - Static variable in class nxopen.uf.UFConstants
-
- UF_subdivision_mesh_vertex_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_surf_deviation_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_SURF_POLE_NOT_BSURF - Static variable in class nxopen.uf.UFConstants
-
- UF_SURF_REG_err_face_not_on_body - Static variable in class nxopen.uf.UFConstants
-
- UF_SURF_REG_err_invalid_name - Static variable in class nxopen.uf.UFConstants
-
- UF_SURF_REG_err_unsupp_alg_version - Static variable in class nxopen.uf.UFConstants
-
- UF_surface_intersection_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_surface_normal_flipped_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_surface_normal_flipped_u_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_surface_normal_flipped_v_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_surface_normal_parallel_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_surface_normal_parallel_u_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_surface_normal_parallel_v_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_surface_of_revolution_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_surface_of_revolution_type - Static variable in class nxopen.uf.UFConstants
-
- UF_surface_profile_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_surface_section_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_SV_SND_ASYNC - Static variable in class nxopen.uf.UFConstants
-
- UF_SV_SND_LOOP - Static variable in class nxopen.uf.UFConstants
-
- UF_SV_SND_NOSILENCE - Static variable in class nxopen.uf.UFConstants
-
- UF_SV_SND_NOWAIT - Static variable in class nxopen.uf.UFConstants
-
- UF_SV_SND_SYNC - Static variable in class nxopen.uf.UFConstants
-
- UF_symbol_font_type - Static variable in class nxopen.uf.UFConstants
-
- UF_symbol_instance_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_symbol_master_type - Static variable in class nxopen.uf.UFConstants
-
- UF_symbol_type - Static variable in class nxopen.uf.UFConstants
-
- UF_symmetric_constraint_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_symmetric_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_table_column_type - Static variable in class nxopen.uf.UFConstants
-
- UF_table_fam_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_table_instance_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_table_smd_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_table_type - Static variable in class nxopen.uf.UFConstants
-
- UF_TABNOT_APPEND - Static variable in class nxopen.uf.UFConstants
-
- UF_TABNOT_ERROR_BASE - Static variable in class nxopen.uf.UFConstants
-
- UF_TABNOT_ERROR_RANGE - Static variable in class nxopen.uf.UFConstants
-
- UF_TABNOT_fit_method_max - Static variable in class nxopen.uf.UFConstants
-
- UF_TABNOT_invalid_attach_point - Static variable in class nxopen.uf.UFConstants
-
- UF_TABNOT_invalid_cell_tag - Static variable in class nxopen.uf.UFConstants
-
- UF_TABNOT_invalid_col_tag - Static variable in class nxopen.uf.UFConstants
-
- UF_TABNOT_invalid_density - Static variable in class nxopen.uf.UFConstants
-
- UF_TABNOT_invalid_display_continuation_note - Static variable in class nxopen.uf.UFConstants
-
- UF_TABNOT_invalid_fit_method - Static variable in class nxopen.uf.UFConstants
-
- UF_TABNOT_invalid_header_location - Static variable in class nxopen.uf.UFConstants
-
- UF_TABNOT_invalid_overflow_direction - Static variable in class nxopen.uf.UFConstants
-
- UF_TABNOT_invalid_plist_col_tag - Static variable in class nxopen.uf.UFConstants
-
- UF_TABNOT_invalid_plist_row_tag - Static variable in class nxopen.uf.UFConstants
-
- UF_TABNOT_invalid_plist_tag - Static variable in class nxopen.uf.UFConstants
-
- UF_TABNOT_invalid_precision - Static variable in class nxopen.uf.UFConstants
-
- UF_TABNOT_invalid_row_tag - Static variable in class nxopen.uf.UFConstants
-
- UF_TABNOT_invalid_section_tag - Static variable in class nxopen.uf.UFConstants
-
- UF_TABNOT_invalid_tabnot_tag - Static variable in class nxopen.uf.UFConstants
-
- UF_TABNOT_invalid_template_file_name - Static variable in class nxopen.uf.UFConstants
-
- UF_TABNOT_invalid_text_aspect_ratio - Static variable in class nxopen.uf.UFConstants
-
- UF_TABNOT_invalid_text_char_space_factor - Static variable in class nxopen.uf.UFConstants
-
- UF_TABNOT_invalid_text_format - Static variable in class nxopen.uf.UFConstants
-
- UF_TABNOT_invalid_text_height - Static variable in class nxopen.uf.UFConstants
-
- UF_TABNOT_invalid_text_justification - Static variable in class nxopen.uf.UFConstants
-
- UF_TABNOT_invalid_text_line_space_factor - Static variable in class nxopen.uf.UFConstants
-
- UF_TABNOT_invalid_zero_display - Static variable in class nxopen.uf.UFConstants
-
- UF_TABNOT_nm_fit_methods - Static variable in class nxopen.uf.UFConstants
-
- UF_TABNOT_NO_ERRORS - Static variable in class nxopen.uf.UFConstants
-
- UF_tabular_hole_table_col_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_tabular_hole_table_row_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_tabular_hole_table_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_tabular_note_cell_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_tabular_note_column_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_tabular_note_row_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_tabular_note_section_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_tabular_note_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_tabular_note_type - Static variable in class nxopen.uf.UFConstants
-
- UF_tabulated_cylinder_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_tabulated_cylinder_type - Static variable in class nxopen.uf.UFConstants
-
- UF_tangent_constraint_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_temporary_part_attribute_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_texture_type - Static variable in class nxopen.uf.UFConstants
-
- UF_thd_symbolic_data_type - Static variable in class nxopen.uf.UFConstants
-
- UF_tilt_subop_data_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_tol_feature_instance_type - Static variable in class nxopen.uf.UFConstants
-
- UF_tolerance_feature_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_tolerance_feature_type - Static variable in class nxopen.uf.UFConstants
-
- UF_tolerance_model_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_tool_display_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_tool_display_type - Static variable in class nxopen.uf.UFConstants
-
- UF_tool_holder_type - Static variable in class nxopen.uf.UFConstants
-
- UF_tool_type - Static variable in class nxopen.uf.UFConstants
-
- UF_total_runout_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_traceline_automatic_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_traceline_curves_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_traceline_type - Static variable in class nxopen.uf.UFConstants
-
- UF_tracking_point_type - Static variable in class nxopen.uf.UFConstants
-
- UF_trim_angle_check_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_turn_avoidance_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_turn_bnd_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_TURN_CUTTER_TRACKING_POINT_BL - Static variable in class nxopen.uf.UFConstants
-
- UF_TURN_CUTTER_TRACKING_POINT_BM - Static variable in class nxopen.uf.UFConstants
-
- UF_TURN_CUTTER_TRACKING_POINT_BR - Static variable in class nxopen.uf.UFConstants
-
- UF_TURN_CUTTER_TRACKING_POINT_ML - Static variable in class nxopen.uf.UFConstants
-
- UF_TURN_CUTTER_TRACKING_POINT_MM - Static variable in class nxopen.uf.UFConstants
-
- UF_TURN_CUTTER_TRACKING_POINT_MR - Static variable in class nxopen.uf.UFConstants
-
- UF_TURN_CUTTER_TRACKING_POINT_TL - Static variable in class nxopen.uf.UFConstants
-
- UF_TURN_CUTTER_TRACKING_POINT_TM - Static variable in class nxopen.uf.UFConstants
-
- UF_TURN_CUTTER_TRACKING_POINT_TR - Static variable in class nxopen.uf.UFConstants
-
- UF_turn_featr_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_turn_geom_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_TURN_INSERT_POSITION_TYPE_TOPSIDE - Static variable in class nxopen.uf.UFConstants
-
- UF_TURN_INSERT_POSITION_TYPE_UNDERSIDE - Static variable in class nxopen.uf.UFConstants
-
- UF_TURN_INSERTTYPE_DIAMOND_100 - Static variable in class nxopen.uf.UFConstants
-
- UF_TURN_INSERTTYPE_DIAMOND_35 - Static variable in class nxopen.uf.UFConstants
-
- UF_TURN_INSERTTYPE_DIAMOND_55 - Static variable in class nxopen.uf.UFConstants
-
- UF_TURN_INSERTTYPE_DIAMOND_75 - Static variable in class nxopen.uf.UFConstants
-
- UF_TURN_INSERTTYPE_DIAMOND_80 - Static variable in class nxopen.uf.UFConstants
-
- UF_TURN_INSERTTYPE_DIAMOND_86 - Static variable in class nxopen.uf.UFConstants
-
- UF_TURN_INSERTTYPE_GRV_FNR - Static variable in class nxopen.uf.UFConstants
-
- UF_TURN_INSERTTYPE_GRV_RTJ - Static variable in class nxopen.uf.UFConstants
-
- UF_TURN_INSERTTYPE_GRV_STD - Static variable in class nxopen.uf.UFConstants
-
- UF_TURN_INSERTTYPE_GRV_USER - Static variable in class nxopen.uf.UFConstants
-
- UF_TURN_INSERTTYPE_HEXAGON - Static variable in class nxopen.uf.UFConstants
-
- UF_TURN_INSERTTYPE_OCTAGON - Static variable in class nxopen.uf.UFConstants
-
- UF_TURN_INSERTTYPE_PARALLEL_55 - Static variable in class nxopen.uf.UFConstants
-
- UF_TURN_INSERTTYPE_PARALLEL_82 - Static variable in class nxopen.uf.UFConstants
-
- UF_TURN_INSERTTYPE_PARALLEL_85 - Static variable in class nxopen.uf.UFConstants
-
- UF_TURN_INSERTTYPE_PENTAGON - Static variable in class nxopen.uf.UFConstants
-
- UF_TURN_INSERTTYPE_RECTANGLE - Static variable in class nxopen.uf.UFConstants
-
- UF_TURN_INSERTTYPE_ROUND - Static variable in class nxopen.uf.UFConstants
-
- UF_TURN_INSERTTYPE_SQUARE - Static variable in class nxopen.uf.UFConstants
-
- UF_TURN_INSERTTYPE_THREAD_STD - Static variable in class nxopen.uf.UFConstants
-
- UF_TURN_INSERTTYPE_THREAD_TRAP - Static variable in class nxopen.uf.UFConstants
-
- UF_TURN_INSERTTYPE_TRIANGLE - Static variable in class nxopen.uf.UFConstants
-
- UF_TURN_INSERTTYPE_TRIGON - Static variable in class nxopen.uf.UFConstants
-
- UF_TURN_INSERTTYPE_USER - Static variable in class nxopen.uf.UFConstants
-
- UF_turn_orient_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_TURN_RELIEF_ANGLE_TYPE_A - Static variable in class nxopen.uf.UFConstants
-
- UF_TURN_RELIEF_ANGLE_TYPE_B - Static variable in class nxopen.uf.UFConstants
-
- UF_TURN_RELIEF_ANGLE_TYPE_C - Static variable in class nxopen.uf.UFConstants
-
- UF_TURN_RELIEF_ANGLE_TYPE_D - Static variable in class nxopen.uf.UFConstants
-
- UF_TURN_RELIEF_ANGLE_TYPE_E - Static variable in class nxopen.uf.UFConstants
-
- UF_TURN_RELIEF_ANGLE_TYPE_F - Static variable in class nxopen.uf.UFConstants
-
- UF_TURN_RELIEF_ANGLE_TYPE_G - Static variable in class nxopen.uf.UFConstants
-
- UF_TURN_RELIEF_ANGLE_TYPE_N - Static variable in class nxopen.uf.UFConstants
-
- UF_TURN_RELIEF_ANGLE_TYPE_O - Static variable in class nxopen.uf.UFConstants
-
- UF_TURN_RELIEF_ANGLE_TYPE_P - Static variable in class nxopen.uf.UFConstants
-
- UF_TURN_THICKNESS_TYPE_01 - Static variable in class nxopen.uf.UFConstants
-
- UF_TURN_THICKNESS_TYPE_02 - Static variable in class nxopen.uf.UFConstants
-
- UF_TURN_THICKNESS_TYPE_03 - Static variable in class nxopen.uf.UFConstants
-
- UF_TURN_THICKNESS_TYPE_04 - Static variable in class nxopen.uf.UFConstants
-
- UF_TURN_THICKNESS_TYPE_05 - Static variable in class nxopen.uf.UFConstants
-
- UF_TURN_THICKNESS_TYPE_06 - Static variable in class nxopen.uf.UFConstants
-
- UF_TURN_THICKNESS_TYPE_07 - Static variable in class nxopen.uf.UFConstants
-
- UF_TURN_THICKNESS_TYPE_09 - Static variable in class nxopen.uf.UFConstants
-
- UF_TURN_THICKNESS_TYPE_11 - Static variable in class nxopen.uf.UFConstants
-
- UF_TURN_THICKNESS_TYPE_12 - Static variable in class nxopen.uf.UFConstants
-
- UF_TURN_THICKNESS_TYPE_T1 - Static variable in class nxopen.uf.UFConstants
-
- UF_TURN_THICKNESS_TYPE_T2 - Static variable in class nxopen.uf.UFConstants
-
- UF_TURN_THICKNESS_TYPE_T3 - Static variable in class nxopen.uf.UFConstants
-
- UF_TURN_THICKNESS_TYPE_USER - Static variable in class nxopen.uf.UFConstants
-
- UF_turn_tracking_point_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_TYPE_CHAR - Static variable in class nxopen.uf.UFConstants
-
- UF_TYPE_CHAR_ARRAY - Static variable in class nxopen.uf.UFConstants
-
- UF_TYPE_DOUBLE - Static variable in class nxopen.uf.UFConstants
-
- UF_TYPE_DOUBLE_ARRAY - Static variable in class nxopen.uf.UFConstants
-
- UF_TYPE_TAG_T - Static variable in class nxopen.uf.UFConstants
-
- UF_TYPE_TAG_T_ARRAY - Static variable in class nxopen.uf.UFConstants
-
- UF_UDE_NOT_VALID_SET - Static variable in class nxopen.uf.UFConstants
-
- UF_UDE_PARAM_DOES_NOT_EXIST - Static variable in class nxopen.uf.UFConstants
-
- UF_UDE_PARAM_IS_NOT_OPTIONAL - Static variable in class nxopen.uf.UFConstants
-
- UF_UDE_PARAM_NOT_BOOLEAN_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_UDE_PARAM_NOT_DOUBLE_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_UDE_PARAM_NOT_INTEGER_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_UDE_PARAM_NOT_POINT_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_UDE_PARAM_NOT_STRING_OR_OPTION_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_UDE_PARAM_NOT_VECTOR_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_UDFS_EXP - Static variable in class nxopen.uf.UFConstants
-
- UF_UDFS_EXP_OPTION - Static variable in class nxopen.uf.UFConstants
-
- UF_UDFS_EXP_RANGE - Static variable in class nxopen.uf.UFConstants
-
- UF_UDOBJ_LINK_CHANGED - Static variable in class nxopen.uf.UFConstants
-
- UF_UDOBJ_LINK_COUNT_DIFF - Static variable in class nxopen.uf.UFConstants
-
- UF_UDOBJ_LINK_REMOVED - Static variable in class nxopen.uf.UFConstants
-
- UF_UDOBJ_LINK_UPTODATE - Static variable in class nxopen.uf.UFConstants
-
- UF_ug_libraries_type - Static variable in class nxopen.uf.UFConstants
-
- UF_UGMGR_apiserver_inactive - Static variable in class nxopen.uf.UFConstants
-
- UF_UGMGR_configured_rev_not_found - Static variable in class nxopen.uf.UFConstants
-
- UF_UGMGR_DESC_BUFSIZE - Static variable in class nxopen.uf.UFConstants
-
- UF_UGMGR_DESC_NCHARS - Static variable in class nxopen.uf.UFConstants
-
- UF_UGMGR_DESC_SIZE - Static variable in class nxopen.uf.UFConstants
-
- UF_UGMGR_error_base - Static variable in class nxopen.uf.UFConstants
-
- UF_UGMGR_FNAME_BUFSIZE - Static variable in class nxopen.uf.UFConstants
-
- UF_UGMGR_FNAME_NCHARS - Static variable in class nxopen.uf.UFConstants
-
- UF_UGMGR_FNAME_SIZE - Static variable in class nxopen.uf.UFConstants
-
- UF_UGMGR_FTYPE_BUFSIZE - Static variable in class nxopen.uf.UFConstants
-
- UF_UGMGR_FTYPE_NCHARS - Static variable in class nxopen.uf.UFConstants
-
- UF_UGMGR_FTYPE_SIZE - Static variable in class nxopen.uf.UFConstants
-
- UF_UGMGR_iddisp_rule_not_in_pdm - Static variable in class nxopen.uf.UFConstants
-
- UF_UGMGR_invalid_altids_data - Static variable in class nxopen.uf.UFConstants
-
- UF_UGMGR_invalid_db_setting - Static variable in class nxopen.uf.UFConstants
-
- UF_UGMGR_invalid_fname - Static variable in class nxopen.uf.UFConstants
-
- UF_UGMGR_invalid_input - Static variable in class nxopen.uf.UFConstants
-
- UF_UGMGR_invalid_object - Static variable in class nxopen.uf.UFConstants
-
- UF_UGMGR_invalid_part_desc - Static variable in class nxopen.uf.UFConstants
-
- UF_UGMGR_invalid_part_name - Static variable in class nxopen.uf.UFConstants
-
- UF_UGMGR_invalid_partno - Static variable in class nxopen.uf.UFConstants
-
- UF_UGMGR_invalid_partrev - Static variable in class nxopen.uf.UFConstants
-
- UF_UGMGR_invalid_role - Static variable in class nxopen.uf.UFConstants
-
- UF_UGMGR_invalid_rule - Static variable in class nxopen.uf.UFConstants
-
- UF_UGMGR_invalid_seed - Static variable in class nxopen.uf.UFConstants
-
- UF_UGMGR_invalid_type - Static variable in class nxopen.uf.UFConstants
-
- UF_UGMGR_NAME_BUFSIZE - Static variable in class nxopen.uf.UFConstants
-
- UF_UGMGR_NAME_NCHARS - Static variable in class nxopen.uf.UFConstants
-
- UF_UGMGR_NAME_SIZE - Static variable in class nxopen.uf.UFConstants
-
- UF_UGMGR_no_export_dir - Static variable in class nxopen.uf.UFConstants
-
- UF_UGMGR_not_admin - Static variable in class nxopen.uf.UFConstants
-
- UF_UGMGR_not_loaded_part - Static variable in class nxopen.uf.UFConstants
-
- UF_UGMGR_not_part_name - Static variable in class nxopen.uf.UFConstants
-
- UF_UGMGR_not_supported - Static variable in class nxopen.uf.UFConstants
-
- UF_UGMGR_part_does_not_exist - Static variable in class nxopen.uf.UFConstants
-
- UF_UGMGR_part_exists - Static variable in class nxopen.uf.UFConstants
-
- UF_UGMGR_PARTNO_BUFSIZE - Static variable in class nxopen.uf.UFConstants
-
- UF_UGMGR_PARTNO_NCHARS - Static variable in class nxopen.uf.UFConstants
-
- UF_UGMGR_PARTNO_SIZE - Static variable in class nxopen.uf.UFConstants
-
- UF_UGMGR_PARTREV_BUFSIZE - Static variable in class nxopen.uf.UFConstants
-
- UF_UGMGR_PARTREV_NCHARS - Static variable in class nxopen.uf.UFConstants
-
- UF_UGMGR_PARTREV_SIZE - Static variable in class nxopen.uf.UFConstants
-
- UF_UGMGR_ROLE_BUFSIZE - Static variable in class nxopen.uf.UFConstants
-
- UF_UGMGR_ROLE_NCHARS - Static variable in class nxopen.uf.UFConstants
-
- UF_UGMGR_ROLE_SIZE - Static variable in class nxopen.uf.UFConstants
-
- UF_UGMGR_terminate_obsolete - Static variable in class nxopen.uf.UFConstants
-
- UF_UGMGR_TYPE_BUFSIZE - Static variable in class nxopen.uf.UFConstants
-
- UF_UGMGR_TYPE_NCHARS - Static variable in class nxopen.uf.UFConstants
-
- UF_UGMGR_TYPE_SIZE - Static variable in class nxopen.uf.UFConstants
-
- UF_UGMGR_user_exit_failure - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_APPLY - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_AT_ANGLE - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_ATTACH_DEFAULT - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_ATTACH_DIALOG - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_ATTACH_ITEM - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_ATTACH_NO_CHANGE - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_ATTACH_NONE - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_BACK - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_CANCEL - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_CB_CONTINUE_DIALOG - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_CB_CONTINUE_SWITCH - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_CB_EXIT_DIALOG - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_CB_REJECT_SWITCH - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_CB_TERMINATE - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_COORD_SYSTEM_AXIS - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_DATUM_AXIS - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_DATUM_PLANE - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_disable_all - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_disable_specific - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_DISP_ALL - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_DISP_NO_VECTOR - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_DISP_NONE - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_DISP_SELECTED - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_DISP_TEMP_VECTOR - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_EDGE_CURVE - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_enable_all - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_ENABLE_OK_NO_DEFAULT - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_enable_specific - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_ERROR - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_FACE_NORMAL - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_FAILURE - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_FILE_CHANGE_PART - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_FILE_CLOSE - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_FILE_EXECUTE - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_FILE_NEW - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_FILE_OPEN - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_FILE_QUIT - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_FILE_REOPEN - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_FILE_SAVE - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_FILE_SAVE_ALL - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_FILE_SAVE_AND_CLOSE - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_FILE_SAVE_AND_EXIT - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_FILE_SAVE_AS - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_FILE_SAVEALL_AND_CLOSE - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_FILE_SAVEAS_AND_CLOSE - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_FROM_CUSTOM - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_GRAMS_CENTIMETERS - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_GRAMS_MILLIMETERS - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_HELP - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_HIDE - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_IJK_COMPONENTS - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_INFERRED - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_KILOS_METERS - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_KILOS_MILLIMETERS - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_LINE_ENDPOINT - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_LOCK - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_LOCK_ERROR - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_LOCK_EXISTS - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_LOCK_SET - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_LOCK_UNNECESSARY - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_MAX_STRING_LEN - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_MSG_POS_BOTTOM_RIGHT - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_MSG_POS_CASCADE - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_MSG_POS_CURSOR - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_MSG_POS_DA1 - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_MSG_POS_DA2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_MSG_POS_TOP_LEFT - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_NEGATIVE_XC_AXIS - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_NEGATIVE_YC_AXIS - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_NEGATIVE_ZC_AXIS - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_NO_DEFAULT - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_NO_LOCK - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_NO_LOCK_EXISTED - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_OBJECT_SELECTED - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_OBJECT_SELECTED_BY_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_OK - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_ONT_ERROR_ONT_DOES_NOT_EXIST - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_PART_OPEN_XT_FLTR - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_PICK_RESPONSE - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_POUNDS_FEET - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_POUNDS_INCHES - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_ROUTE_PLV_INDEX_CABLE_CONDUITS - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_ROUTE_PLV_INDEX_CABLES - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_ROUTE_PLV_INDEX_CUT_ELBOWS - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_ROUTE_PLV_INDEX_DUCT_REINFORCEMENT - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_ROUTE_PLV_INDEX_ELBOWS - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_ROUTE_PLV_INDEX_FILLERS - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_ROUTE_PLV_INDEX_OUTLET - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_ROUTE_PLV_INDEX_OVERSTOCK - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_ROUTE_PLV_INDEX_PARTS - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_ROUTE_PLV_INDEX_PLATFORM_PLATE - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_ROUTE_PLV_INDEX_REPLACE_PART - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_ROUTE_PLV_INDEX_SHIELDS - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_ROUTE_PLV_INDEX_SPACE_RESERVATION - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_ROUTE_PLV_INDEX_STOCK - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_ROUTE_PLV_INDEX_WIRES - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_ROUTE_SEL_ALL - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_ROUTE_SEL_ANCHOR - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_ROUTE_SEL_INT_RCP - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_ROUTE_SEL_INT_SEG - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_ROUTE_SEL_METHOD_BRANCH - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_ROUTE_SEL_METHOD_FABRICATION - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_ROUTE_SEL_METHOD_FLOW_PATH - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_ROUTE_SEL_METHOD_PATH - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_ROUTE_SEL_METHOD_ROUTING - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_ROUTE_SEL_METHOD_STANDARD - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_ROUTE_SEL_PART - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_ROUTE_SEL_PORT - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_ROUTE_SEL_RCP - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_ROUTE_SEL_SEG - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_ROUTE_SEL_SPLINE_DATA - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_ROUTE_SEL_STD - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_ROUTE_SEL_STOCK - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_ACCEPT - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_DESC_DESELECTION - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_DESC_MULTIPLE - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_DESC_NAME_SELECTION - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_DESC_RECTANGLE - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_DESC_RECTANGLE_POSITION - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_DESC_RESELECTION - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_DESC_SELECTION - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_DESC_SINGLE - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_DESC_SINGLE_POSITION - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_FAILURE - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_FEATURE_ANY_COMPOSITE_BODY - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_FEATURE_ANY_COMPOSITE_EDGE - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_FEATURE_ANY_COMPOSITE_FACE - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_FEATURE_ANY_EDGE - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_FEATURE_ANY_FACE - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_FEATURE_ANY_SHEET - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_FEATURE_ANY_WIRE_OR_EDGE - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_FEATURE_BCURVE_EDGE - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_FEATURE_BLENDING_FACE - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_FEATURE_BODY - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_FEATURE_CIRCULAR_EDGE - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_FEATURE_CNST_PARM_EDGE - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_FEATURE_CONICAL_FACE - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_FEATURE_CYLINDRICAL_FACE - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_FEATURE_ELLIPTICAL_EDGE - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_FEATURE_FOREIGN_EDGE - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_FEATURE_FOREIGN_FACE - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_FEATURE_INTERSECTION_EDGE - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_FEATURE_LINEAR_EDGE - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_FEATURE_MAX_FEATURE - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_FEATURE_MAX_SPECIAL_FEATURE - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_FEATURE_OFFSET_FACE - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_FEATURE_PARAMETRIC_FACE - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_FEATURE_PLANAR_FACE - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_FEATURE_ROUTING_CURVE_ONLY - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_FEATURE_ROUTING_SOLID_ONLY - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_FEATURE_SHEET_BODY - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_FEATURE_SOLID_BODY - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_FEATURE_SPCURVE_EDGE - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_FEATURE_SPHERICAL_FACE - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_FEATURE_SWEPT_FACE - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_FEATURE_SWUNG_FACE - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_FEATURE_TOROIDAL_FACE - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_FEATURE_WELD_ARC_SPOT - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_FEATURE_WELD_BEAD - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_FEATURE_WELD_COMPOUND - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_FEATURE_WELD_CUSTOM1 - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_FEATURE_WELD_CUSTOM2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_FEATURE_WELD_CUSTOM3 - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_FEATURE_WELD_CUSTOM4 - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_FEATURE_WELD_CUSTOM5 - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_FEATURE_WELD_DATUM_CUSTOM1 - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_FEATURE_WELD_DATUM_CUSTOM2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_FEATURE_WELD_DATUM_CUSTOM3 - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_FEATURE_WELD_DATUM_PIN - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_FEATURE_WELD_DATUM_SURFACE - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_FEATURE_WELD_DOLLOP - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_FEATURE_WELD_EDGE - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_FEATURE_WELD_FILL - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_FEATURE_WELD_FILLET - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_FEATURE_WELD_GROOVE - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_FEATURE_WELD_JOINT - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_FEATURE_WELD_JOINTMARK - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_FEATURE_WELD_MEASUREMENT_CUSTOM1 - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_FEATURE_WELD_MEASUREMENT_CUSTOM2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_FEATURE_WELD_MEASUREMENT_CUSTOM3 - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_FEATURE_WELD_MEASUREMENT_HEMMED_EDGE - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_FEATURE_WELD_MEASUREMENT_HOLE - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_FEATURE_WELD_MEASUREMENT_SLOT - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_FEATURE_WELD_MEASUREMENT_STUD - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_FEATURE_WELD_MEASUREMENT_SURFACE - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_FEATURE_WELD_MEASUREMENT_TRIM - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_FEATURE_WELD_MEC_CLINCH - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_FEATURE_WELD_NUT - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_FEATURE_WELD_PLUG_SLOT - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_FEATURE_WELD_RESIS_SEAM - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_FEATURE_WELD_RESIS_SPOT - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_FEATURE_WELD_STUD - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_FEATURE_WELD_SURFACE_WELD - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_FEATURE_WELD_USER_DEFINED - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_FEATURE_WORK_PART_COMP - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_NOT_A_FEATURE - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_REJECT - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_SCOPE_ANY_IN_ASSEMBLY - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_SCOPE_NO_CHANGE - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_SCOPE_WORK_PART - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_SCOPE_WORK_PART_AND_OCC - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_SCOPE_WORK_PART_AND_WP_OCC - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_SUCCESS - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_TYPE_INACTIVE_SELECTION - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_TYPE_RECTANGLE_POSITION - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_TYPE_ROBUST_SELECTION - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_TYPE_SINGLE_DESELECTION - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_TYPE_SINGLE_POSITION - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SEL_TYPE_SINGLE_SELECTION - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SHOW - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SPHERICAL_COORDS - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SUCCESS - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_SYSTEM_DECIMAL_PLACES - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_TANGENT_TO_CURVE - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_TWO_POINTS - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_UNLOCK - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_UNLOCK_ERROR - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_UNLOCK_SET - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_USER_DECIMAL_PLACES - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_XC_AXIS - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_YC_AXIS - Static variable in class nxopen.uf.UFConstants
-
- UF_UI_ZC_AXIS - Static variable in class nxopen.uf.UFConstants
-
- UF_UNDO_MISC_CB_ANY_MARK - Static variable in class nxopen.uf.UFConstants
-
- UF_UNDO_NO_VIS_MARK_PRESENT - Static variable in class nxopen.uf.UFConstants
-
- UF_UNDO_USE_NAME_ID - Static variable in class nxopen.uf.UFConstants
-
- UF_unfolded_section_line_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_ACCELERATION_ft__sec2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_ACCELERATION_g - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_ACCELERATION_in__sec2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_ACCELERATION_m__sec2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_ACCELERATION_mm__sec2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_ANGLE_deg - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_ANGLE_rad - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_ANGLE_rev - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_ANGULARACCELERATION_deg__sec2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_ANGULARACCELERATION_rad__sec2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_ANGULARACCELERATION_rev__min2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_ANGULARACCELERATION_rev__sec2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_ANGULARJERK_deg__sec3 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_ANGULARJERK_rad__sec3 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_ANGULARJERK_rev__min3 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_ANGULARJERK_rev__sec3 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_ANGULARMOMENTUM_lbf_ft_sec__deg - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_ANGULARMOMENTUM_lbf_ft_sec__rad - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_ANGULARMOMENTUM_lbf_in_sec__deg - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_ANGULARMOMENTUM_lbf_in_sec__rad - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_ANGULARMOMENTUM_mN_mm_sec__deg - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_ANGULARMOMENTUM_mN_mm_sec__rad - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_ANGULARMOMENTUM_N_m_sec__deg - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_ANGULARMOMENTUM_N_m_sec__rad - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_ANGULARMOMENTUM_N_mm_sec__deg - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_ANGULARMOMENTUM_N_mm_sec__rad - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_ANGULARVELOCITY_deg__sec - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_ANGULARVELOCITY_rad__sec - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_ANGULARVELOCITY_rev__min - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_ANGULARVELOCITY_rev__sec - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_AREA_cm2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_AREA_ft2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_AREA_in2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_AREA_m2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_AREA_mm2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_COEFFICIENTLENGTH_ft - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_COEFFICIENTLENGTH_in - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_COEFFICIENTLENGTH_m - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_COEFFICIENTLENGTH_mm - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_COEFFICIENTPERTIME__hr - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_COEFFICIENTPERTIME__min - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_COEFFICIENTPERTIME__sec - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_CONDUCTANCE_BTU__hr__degF - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_CONDUCTANCE_BTU__min__degF - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_CONDUCTANCE_BTU__sec__degF - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_CONDUCTANCE_lbfin__sec__degF - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_CONDUCTANCE_microWatt__degC - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_CONDUCTANCE_mWatt__degC - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_CONDUCTANCE_Watt__degC - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_CONVECTION_COEFF_BTU__hr__ft2__degF - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_CONVECTION_COEFF_BTU__hr__in2__degF - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_CONVECTION_COEFF_BTU__sec__ft2__degF - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_CONVECTION_COEFF_BTU__sec__in2__degF - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_CONVECTION_COEFF_lbfin__sec__in2__degF - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_CONVECTION_COEFF_microWatt__mm2__degC - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_CONVECTION_COEFF_mWatt__mm2__degC - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_CONVECTION_COEFF_Watt__cm2__degC - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_CONVECTION_COEFF_Watt__in2__degC - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_CONVECTION_COEFF_Watt__m2__degC - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_CONVECTION_COEFF_Watt__mm2__degC - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_DIFFUSIVITY_cm2__s - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_DIFFUSIVITY_ft2__hr - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_DIFFUSIVITY_ft2__s - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_DIFFUSIVITY_in2__s - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_DIFFUSIVITY_m2__hr - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_DIFFUSIVITY_m2__s - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_DIFFUSIVITY_mm2__s - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_DISSIPATIONRATEOFENERGYPERMASS_ft2__sec3 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_DISSIPATIONRATEOFENERGYPERMASS_in2__sec3 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_DISSIPATIONRATEOFENERGYPERMASS_m2__sec3 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_DISSIPATIONRATEOFENERGYPERMASS_mm2__sec3 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_DYNAMICVISC_g__cm__sec - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_DYNAMICVISC_kg__m__sec - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_DYNAMICVISC_kg__mm__sec - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_DYNAMICVISC_lbf__sec__ft2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_DYNAMICVISC_lbf__sec__in2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_DYNAMICVISC_lbm__ft__sec - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_DYNAMICVISC_lbm__in__sec - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_DYNAMICVISC_mN_sec__mm2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_DYNAMICVISC_N_sec__cm2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_DYNAMICVISC_N_sec__m2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_DYNAMICVISC_N_sec__mm2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_ELECTRICALCONDUCTANCE_English1 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_ELECTRICALCONDUCTANCE_mho - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_ELECTRICALCONDUCTANCE_Mmho - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_ELECTRICALRESISTANCE_English1 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_ELECTRICALRESISTANCE_microOhm - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_ELECTRICALRESISTANCE_ohm - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_ELECTRICALRESISTIVITY_English1 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_ELECTRICALRESISTIVITY_kohm_ft - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_ELECTRICALRESISTIVITY_kohm_m - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_ELECTRICALRESISTIVITY_microOhm_mm - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_ELECTRICALRESISTIVITY_Mohm_ft - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_ELECTRICALRESISTIVITY_Mohm_m - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_ELECTRICALRESISTIVITY_ohm_cm - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_ELECTRICALRESISTIVITY_ohm_ft - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_ELECTRICALRESISTIVITY_ohm_in - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_ELECTRICALRESISTIVITY_ohm_m - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_ELECTRICALRESISTIVITY_ohm_mm - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_ELECTRICCURRENT_A - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_ELECTRICCURRENT_mA - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_ELECTRICCURRENT_microA - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_ENERGY_btu - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_ENERGY_j - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_ENERGY_lbfin - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_ENERGY_lbm_ft2__sec2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_ENERGY_microJ - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_ENERGYPERMASS_ft2__sec2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_ENERGYPERMASS_in2__sec2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_ENERGYPERMASS_m2__sec2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_ENERGYPERMASS_mm2__sec2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_FATIGUELIFE_DUTYCYCLES - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_FATIGUESTR_COEFF_lbf__in2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_FATIGUESTR_COEFF_mN__mm2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_FATIGUESTR_COEFF_N__m2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_FATIGUESTR_COEFF_N__mm2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_FORCE_lbf - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_FORCE_mN - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_FORCE_N - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_FORCE_Poundal - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_FREQUENCY_GHz - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_FREQUENCY_hz - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_FREQUENCY_kHz - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_FREQUENCY_MHz - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_HEADLOSSCOEFF_lbf_sec__ft3 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_HEADLOSSCOEFF_lbf_sec__in3 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_HEADLOSSCOEFF_mN_sec__mm3 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_HEADLOSSCOEFF_N_sec__m3 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_HEATFLOW_BTU__sec - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_HEATFLOW_lbfin__sec - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_HEATFLOW_microWatt - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_HEATFLOW_Watt - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_HEATFLUX_BTU__hr__ft2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_HEATFLUX_BTU__hr__in2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_HEATFLUX_BTU__sec__ft2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_HEATFLUX_BTU__sec__in2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_HEATFLUX_lbfin__sec__in2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_HEATFLUX_microWatt__mm2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_HEATFLUX_mWatt__mm2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_HEATFLUX_Watt__cm2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_HEATFLUX_Watt__in2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_HEATFLUX_Watt__m2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_HEATFLUX_Watt__mm2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_HEATGENERATION_BTU__hr__ft3 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_HEATGENERATION_BTU__hr__in3 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_HEATGENERATION_BTU__sec__in3 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_HEATGENERATION_lbfin__sec__in3 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_HEATGENERATION_microWatt__mm3 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_HEATGENERATION_Watt__m3 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_HEATGENERATION_Watt__mm3 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_INDUCTANCE_English1 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_INDUCTANCE_H - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_INDUCTANCE_mH - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_INDUCTANCE_microH - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_INDUCTANCE_nanoH - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_JERK_ft__sec3 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_JERK_in__sec3 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_JERK_m__sec3 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_JERK_mm__sec3 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_LATENTHEATPERMASS_BTU__lbm - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_LATENTHEATPERMASS_BTU_in__lbf_sec2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_LATENTHEATPERMASS_cal__g - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_LATENTHEATPERMASS_J__kg - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_LATENTHEATPERMASS_kJ__kg - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_LATENTHEATPERMASS_lbfin__lbm - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_LATENTHEATPERMASS_lbfin_in__lbf_sec2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_LATENTHEATPERMASS_microJ__kg - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_LENGTH_a - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_LENGTH_cm - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_LENGTH_ft - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_LENGTH_in - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_LENGTH_km - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_LENGTH_m - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_LENGTH_mi - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_LENGTH_micron - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_LENGTH_mm - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_LENGTH_nm - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_LENGTHCONDUCTANCE_BTU__hr__ft__degF - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_LENGTHCONDUCTANCE_BTU__hr__in__degF - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_LENGTHCONDUCTANCE_BTU__sec__ft__degF - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_LENGTHCONDUCTANCE_BTU__sec__in__degF - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_LENGTHCONDUCTANCE_lbfin__sec__in__degF - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_LENGTHCONDUCTANCE_microWatt__mm__degC - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_LENGTHCONDUCTANCE_mWatt__mm__degC - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_LENGTHCONDUCTANCE_Watt__cm__degC - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_LENGTHCONDUCTANCE_Watt__m__degC - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_LENGTHCONDUCTANCE_Watt__mm__degC - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MAGNETICFIELDSTRENGTH_A__in - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MAGNETICFIELDSTRENGTH_A__m - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MAGNETICFIELDSTRENGTH_A__mm - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MAGNETICFIELDSTRENGTH_mA__mm - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MAGNETICFLUXDENSITY_lbf__A_in - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MAGNETICFLUXDENSITY_N__A_m - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MAGNETICFLUXDENSITY_Tesla - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MASS_g - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MASS_kg - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MASS_kgf_sec2__m - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MASS_kgf_sec2__mm - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MASS_lbf_sec2__in - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MASS_lbfsec__in2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MASS_lbm - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MASS_slug - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MASS_t - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MASSDENSITY_g__cm3 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MASSDENSITY_g__mm3 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MASSDENSITY_kg__m3 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MASSDENSITY_kg__mm3 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MASSDENSITY_lbfsec2__in4 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MASSDENSITY_lbm__ft3 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MASSDENSITY_lbm__in3 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MASSDENSITY_slug__ft3 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MASSDENSITY_t__m3 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MASSDENSITY_t__mm3 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MASSFLOW_g__hr - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MASSFLOW_g__min - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MASSFLOW_g__sec - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MASSFLOW_kg__hr - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MASSFLOW_kg__min - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MASSFLOW_kg__sec - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MASSFLOW_lbf__sec__ft - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MASSFLOW_lbf__sec__in - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MASSFLOW_lbm__hr - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MASSFLOW_lbm__min - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MASSFLOW_lbm__sec - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MASSFLUX_kg__sec__m2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MASSFLUX_kg__sec__mm2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MASSFLUX_lbf_sec__ft3 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MASSFLUX_lbf_sec__in3 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MASSFLUX_lbm__sec__ft2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MASSFLUX_lbm__sec__in2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MASSLENGTH_g_cm - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MASSLENGTH_g_mm - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MASSLENGTH_kg_m - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MASSLENGTH_kg_mm - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MASSLENGTH_lbf__sec2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MASSLENGTH_lbm_ft - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MASSLENGTH_lbm_in - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MASSMOMENTINERTIA_gcm2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MASSMOMENTINERTIA_gmm2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MASSMOMENTINERTIA_kgm2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MASSMOMENTINERTIA_kgmm2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MASSMOMENTINERTIA_lbfinsec2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MASSMOMENTINERTIA_lbmft2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MASSMOMENTINERTIA_lbmin2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MASSPERAREA_kg__m2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MASSPERAREA_kg__mm2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MASSPERAREA_lbf_sec2__ft3 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MASSPERAREA_lbf_sec2__in3 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MASSPERAREA_lbm__ft2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MASSPERAREA_lbm__in2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MASSPERAREA_t__m2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MASSPERAREA_t__mm2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MASSPERLENGTH_kg__m - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MASSPERLENGTH_kg__mm - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MASSPERLENGTH_lbf_sec2__ft2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MASSPERLENGTH_lbf_sec2__in2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MASSPERLENGTH_lbm__ft - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MASSPERLENGTH_lbm__in - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MASSPERLENGTH_t__m - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MASSPERLENGTH_t__mm - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MOMENT_lbfft - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MOMENT_lbfin - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MOMENT_mNmm - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MOMENT_Nm - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MOMENT_Nmm - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MOMENT_OF_INERTIA_ft4 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MOMENT_OF_INERTIA_in4 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MOMENT_OF_INERTIA_m4 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MOMENT_OF_INERTIA_mm4 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MOMENTPERANGLE_lbf_ft__deg - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MOMENTPERANGLE_lbf_ft__rad - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MOMENTPERANGLE_lbf_in__deg - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MOMENTPERANGLE_lbf_in__rad - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MOMENTPERANGLE_mN_mm__deg - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MOMENTPERANGLE_mN_mm__rad - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MOMENTPERANGLE_N_m__deg - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MOMENTPERANGLE_N_m__rad - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MOMENTPERANGLE_N_mm__deg - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MOMENTPERANGLE_N_mm__rad - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MOMENTUM_kg_m__sec - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MOMENTUM_kg_mm__sec - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MOMENTUM_lbfsec - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MOMENTUM_lbm_ft__sec - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_MOMENTUM_lbm_in__sec - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_PERAREA__cm2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_PERAREA__ft2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_PERAREA__in2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_PERAREA__m2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_PERAREA__mm2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_PERVOLUME__cm3 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_PERVOLUME__ft3 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_PERVOLUME__in3 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_PERVOLUME__m3 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_PERVOLUME__mm3 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_POWER_BTU__hr - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_POWER_BTU__min - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_POWER_BTU__sec - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_POWER_kw - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_POWER_lbfin__sec - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_POWER_lbm_ft2__sec3 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_POWER_microW - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_POWER_mw - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_POWER_w - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_PRESSURE_atmosphere - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_PRESSURE_bar - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_PRESSURE_in_H2O - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_PRESSURE_in_Hg - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_PRESSURE_lbf__ft2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_PRESSURE_lbf__in2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_PRESSURE_mm_H2O - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_PRESSURE_mm_Hg - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_PRESSURE_mN__mm2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_PRESSURE_N__cm2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_PRESSURE_N__m2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_PRESSURE_N__mm2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_PRESSUREONEDGE_lbf__ft - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_PRESSUREONEDGE_lbf__in - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_PRESSUREONEDGE_mN__mm - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_PRESSUREONEDGE_N__m - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_PRESSUREONEDGE_N__mm - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_SPECIFICHEAT_BTU__lbm__degF - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_SPECIFICHEAT_BTU_in__lbf_sec2_degF - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_SPECIFICHEAT_J__kg__degK - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_SPECIFICHEAT_kJ__kg__degK - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_SPECIFICHEAT_lbfin_in__lbf_sec2_degF - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_SPECIFICHEAT_lbfin_lbm_degF - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_SPECIFICHEAT_microJ__kg__degK - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_STRAIN_in__in - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_STRAIN_mm__mm - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_STRAINENERGY_lbfft - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_STRAINENERGY_lbfin - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_STRAINENERGY_mNmm - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_STRAINENERGY_Nm - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_STRAINENERGY_Nmm - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_STRAINENERGYDENSITY_lbfft__ft3 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_STRAINENERGYDENSITY_lbfin__in3 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_STRAINENERGYDENSITY_mNmm__mm3 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_STRAINENERGYDENSITY_Nm__m3 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_STRAINENERGYDENSITY_Nmm__m3 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_STRESS_COMPLIANCE_cm2__N - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_STRESS_COMPLIANCE_ft2__lbf - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_STRESS_COMPLIANCE_in2__lbf - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_STRESS_COMPLIANCE_m2__N - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_STRESS_COMPLIANCE_mm2__mN - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_STRESS_COMPLIANCE_mm2__N - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_STRESS_lbf__ft2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_STRESS_lbf__in2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_STRESS_mN__mm2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_STRESS_N__cm2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_STRESS_N__m2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_STRESS_N__mm2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_TEMPERATURE_C - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_TEMPERATURE_F - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_TEMPERATURE_K - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_TEMPERATURE_R - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_TEMPERATURECHANGERATE_C__hr - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_TEMPERATURECHANGERATE_C__min - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_TEMPERATURECHANGERATE_C__sec - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_TEMPERATURECHANGERATE_F__hr - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_TEMPERATURECHANGERATE_F__min - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_TEMPERATURECHANGERATE_F__sec - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_TEMPERATURECHANGERATE_K__hr - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_TEMPERATURECHANGERATE_K__min - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_TEMPERATURECHANGERATE_K__sec - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_TEMPERATURECHANGERATE_R__hr - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_TEMPERATURECHANGERATE_R__min - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_TEMPERATURECHANGERATE_R__sec - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_TEMPERATUREDIFFERENCE_C - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_TEMPERATUREDIFFERENCE_F - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_TEMPERATUREDIFFERENCE_K - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_TEMPERATUREDIFFERENCE_R - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_TEMPERATUREGRADIENT_C__m - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_TEMPERATUREGRADIENT_C__mm - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_TEMPERATUREGRADIENT_F__ft - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_TEMPERATUREGRADIENT_F__in - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_THERMALCAPACITANCE_BTU__F - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_THERMALCAPACITANCE_cal__F - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_THERMALCAPACITANCE_J__C - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_THERMALCAPACITANCE_KJ__C - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_THERMALCAPACITANCE_lbf_ft__F - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_THERMALCAPACITANCE_lbf_in__F - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_THERMALCAPACITANCE_microJ__C - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_THERMALCONDUCTIVITY_BTU__hr__ft__degF - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_THERMALCONDUCTIVITY_BTU__hr__in__degF - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_THERMALCONDUCTIVITY_BTU__sec__ft__degF - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_THERMALCONDUCTIVITY_BTU__sec__in__degF - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_THERMALCONDUCTIVITY_lbfin__sec__in__degF - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_THERMALCONDUCTIVITY_microWatt__mm__degC - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_THERMALCONDUCTIVITY_mWatt__mm__degC - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_THERMALCONDUCTIVITY_Watt__cm__degC - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_THERMALCONDUCTIVITY_Watt__m__degK - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_THERMALCONDUCTIVITY_Watt__mm__degC - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_THERMALCONDUCTIVITYE_Watt__m__degC - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_THERMALENERGY_BTU - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_THERMALENERGY_cJcm - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_THERMALENERGY_J - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_THERMALENERGY_kgfm - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_THERMALENERGY_kgfmm - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_THERMALENERGY_lbfft - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_THERMALENERGY_lbfin - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_THERMALENERGY_microJ - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_THERMALENERGY_mJ - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_THERMALENERGY_pdlft - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_THERMALENERGYPERAREA_BTU__ft2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_THERMALENERGYPERAREA_BTU__in2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_THERMALENERGYPERAREA_J__cm2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_THERMALENERGYPERAREA_J__m2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_THERMALENERGYPERAREA_lbfin__in2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_THERMALENERGYPERAREA_microJ__mm2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_THERMALEXPANSION_COEFF___degC - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_THERMALEXPANSION_COEFF___degF - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_THERMALEXPANSION_COEFF___degK - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_THERMALPIDDERIVATIVE_sec__C - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_THERMALPIDDERIVATIVE_sec__F - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_THERMALPIDGAIN__C - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_THERMALPIDGAIN__F - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_THERMALPIDNTEGRAL__C_sec - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_THERMALPIDNTEGRAL__F_sec - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_THERMALRESISTANCE_degC__microWatt - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_THERMALRESISTANCE_degC__mWatt - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_THERMALRESISTANCE_degC__Watt - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_THERMALRESISTANCE_degF__hr__BTU - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_THERMALRESISTANCE_degF__min__BTU - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_THERMALRESISTANCE_degF__sec__BTU - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_THERMALRESISTANCE_degF__sec__lbfin - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_TIME_hr - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_TIME_min - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_TIME_sec - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_TSAIWUCOEFF_in4_lbf2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_TSAIWUCOEFF_m4__N2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_TSAIWUCOEFF_mm4__mN2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_TSAIWUCOEFF_mm4__N2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_VELOCITY_cm__sec - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_VELOCITY_ft__min - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_VELOCITY_ft__sec - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_VELOCITY_in__sec - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_VELOCITY_km__hr - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_VELOCITY_m__sec - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_VELOCITY_mi__hr - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_VELOCITY_mm__sec - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_VISCOUS_DAMPING_kg__sec - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_VISCOUS_DAMPING_lbfsec__in - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_VISCOUS_DAMPING_lbm__sec - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_VISCOUS_DAMPING_mN_sec__mm - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_VISCOUS_DAMPING_N_sec__m - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_VISCOUS_DAMPING_N_sec__mm - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_VOLTAGE_English1 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_VOLTAGE_microV - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_VOLTAGE_mV - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_VOLTAGE_V - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_VOLTAGEPERANGULARVELOCITY_English1 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_VOLTAGEPERANGULARVELOCITY_English2 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_VOLTAGEPERANGULARVELOCITY_microV_min__rev - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_VOLTAGEPERANGULARVELOCITY_microV_sec__deg - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_VOLTAGEPERANGULARVELOCITY_microV_sec__rad - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_VOLTAGEPERANGULARVELOCITY_mV_min__rev - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_VOLTAGEPERANGULARVELOCITY_mV_sec__deg - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_VOLTAGEPERANGULARVELOCITY_mV_sec__rad - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_VOLTAGEPERANGULARVELOCITY_V_min__rev - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_VOLTAGEPERANGULARVELOCITY_V_sec__deg - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_VOLTAGEPERANGULARVELOCITY_V_sec__rad - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_VOLTAGEPERTEMPERATURE_English1 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_VOLTAGEPERTEMPERATURE_microV__C - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_VOLTAGEPERTEMPERATURE_V__C - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_VOLTAGEPERTEMPERATURE_V__F - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_VOLTAGEPERTEMPERATURE_V__K - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_VOLTAGEPERTEMPERATURE_V__R - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_VOLUME_cm3 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_VOLUME_ft3 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_VOLUME_in3 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_VOLUME_m3 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_VOLUME_mm3 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_VOLUMEFLOW_cm3__sec - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_VOLUMEFLOW_ft3__hr - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_VOLUMEFLOW_ft3__min - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_VOLUMEFLOW_ft3__sec - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_VOLUMEFLOW_in3__sec - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_VOLUMEFLOW_l__hr - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_VOLUMEFLOW_l__min - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_VOLUMEFLOW_l__sec - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_VOLUMEFLOW_m3__hr - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_VOLUMEFLOW_m3__min - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_VOLUMEFLOW_m3__sec - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_VOLUMEFLOW_mm3__sec - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_WARPING_CONSTANT_ft6 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_WARPING_CONSTANT_in6 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_WARPING_CONSTANT_m6 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNIT_WARPING_CONSTANT_mm6 - Static variable in class nxopen.uf.UFConstants
-
- UF_UNLOAD_IMMEDIATELY - Static variable in class nxopen.uf.UFConstants
-
- UF_UNLOAD_SEL_DIALOG - Static variable in class nxopen.uf.UFConstants
-
- UF_UNLOAD_UG_TERMINATE - Static variable in class nxopen.uf.UFConstants
-
- UF_user_defined_area_instance_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_user_defined_attribute_instance_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_user_defined_drafting_instance_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_user_defined_object_type - Static variable in class nxopen.uf.UFConstants
-
- UF_v13_sketch_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_v9_sketch_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_validation_type - Static variable in class nxopen.uf.UFConstants
-
- UF_vicurve_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_view_alignment_type - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_ANALYSIS_SHADED - Static variable in class nxopen.uf.UFConstants
-
- UF_view_auxiliary_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_view_base_member_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_view_break_slave_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_view_break_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_view_cae_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_CANNOT_RENAME_CANNED - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_CANNOT_RENAME_DRAWING - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_CANNOT_RENAME_SKETCH - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_COINCIDENT_POLYLINE_POINTS - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_CONFLICT_ORIENTATION_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_DEPTH_CUE_OFF - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_DEPTH_CUE_ON - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_DEPTH_CUE_UNSUPPORTED - Static variable in class nxopen.uf.UFConstants
-
- UF_view_detail_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_DRAFTING_VIEW_INVALID - Static variable in class nxopen.uf.UFConstants
-
- UF_view_drawing_sheet_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_view_drawing_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_ERR_BAD_CHARS_IN_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_ERR_LAYOUT_IS_DRAWING - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_ERR_NO_ACTIVE_LAYOUT - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_ERR_NO_SUCH_VIEW_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_ERR_NULL_VIEW_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_ERR_ON_DRAWING_NOT_WORK_VIEW - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_ERR_VIEW_ALREADY_EXISTS - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_ERR_VIEW_NAME_TOO_LONG - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_ERR_VIEW_NOT_IN_LAYOUT - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_ERROR_CLIPPING - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_FOG_BOUNDS_UNSUPPORTED - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_FOG_COLOR_UNSUPPORTED - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_FOG_HEAVY - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_FOG_LIGHT - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_FOG_LINEAR - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_FOG_OFF - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_FOG_RATE_UNSUPPORTED - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_FOG_UNSUPPORTED - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_FULLY_SHADED - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_GOURAUD_UNSUPPORTED - Static variable in class nxopen.uf.UFConstants
-
- UF_view_graph_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_HIDDEN_EDGES_DASHED - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_HIDDEN_EDGES_GRAY_THIN - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_HIDDEN_EDGES_INVIS - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_HIDDEN_EDGES_SOLID - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_HIDDEN_SURF_UNSUPPORTED - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_HIDDEN_SURFACE - Static variable in class nxopen.uf.UFConstants
-
- UF_view_imported_pmi_lightweight_section_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_view_imported_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_view_instance_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_INVALID_ARC_ANGLES - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_INVALID_ARC_CENTER - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_INVALID_ARC_RADIUS - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_INVALID_CURVE_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_INVALID_DEPTH_CUE_MODE - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_INVALID_DISPLAY_MODE - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_INVALID_FOG_BACK - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_INVALID_FOG_COLOR - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_INVALID_FOG_FRONT - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_INVALID_FOG_RATE - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_INVALID_HIDDEN_EDGE_STYLE - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_INVALID_HIDDEN_MODE - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_INVALID_LIGHT_COUNT - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_INVALID_LIGHT_MODE - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_INVALID_LIGHT_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_INVALID_LIGHT_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_INVALID_NAME - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_INVALID_OBJECT - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_INVALID_ORIENTATION_TYPE - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_INVALID_POINT_DEFINITION - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_INVALID_POLYLINE_DEFINITION - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_INVALID_RENDERING_STYLE - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_INVALID_SHADED_EDGE_COLOR - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_INVALID_SHADED_EDGE_STYLE - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_INVALID_SHININESS - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_INVALID_SILHOU_MODE - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_INVALID_SMOOTH_ANGLE_TOLERANCE - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_INVALID_SMOOTH_COLOR - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_INVALID_SMOOTH_FONT - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_INVALID_SMOOTH_MODE - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_INVALID_SMOOTH_WIDTH - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_INVALID_TWO_SIDED_LIGHT - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_INVALID_VIEW_TAG - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_IS_NOT_DISPLAYED - Static variable in class nxopen.uf.UFConstants
-
- UF_view_lightweight_section_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_MAX_LIGHT_NAME_LENGTH - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_MAX_SHININESS - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_MAX_VIEW_LIGHTS - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_MIN_SHININESS - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_MIN_VIEW_LIGHTS - Static variable in class nxopen.uf.UFConstants
-
- UF_view_modeling_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_NO_DISPLAYED_PART - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_NO_WORK_VIEW - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_NON_BREAK_LINE_VIEW - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_NOT_IN_DISPLAYED_PART - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_NOT_READY_FOR_CLIPPING - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_NOT_SHADED - Static variable in class nxopen.uf.UFConstants
-
- UF_view_orthographic_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_PARAMETER_IS_NOT_POSITIVE - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_PARAMETER_IS_NULL_POINTER - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_PARAMETER_IS_NULL_TAG - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_PARTIALLY_SHADED - Static variable in class nxopen.uf.UFConstants
-
- UF_view_query_result_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_view_search_model_view_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_view_section_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_view_set_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_view_set_type - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_SILHOUETTES_OFF - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_SILHOUETTES_ON - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_STUDIO_SHADED - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_TOO_FEW_VDE_RECORDS - Static variable in class nxopen.uf.UFConstants
-
- UF_view_type - Static variable in class nxopen.uf.UFConstants
-
- UF_view_user_defined_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_VIEW_VIEW_INFORMATION_INVALID - Static variable in class nxopen.uf.UFConstants
-
- UF_volume_attribute_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_wallthickness_constraint_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_WAVE_data_not_loaded - Static variable in class nxopen.uf.UFConstants
-
- UF_WAVE_err_cannot_map - Static variable in class nxopen.uf.UFConstants
-
- UF_WAVE_err_wave_not_avail - Static variable in class nxopen.uf.UFConstants
-
- UF_WAVE_ERROR_BASE - Static variable in class nxopen.uf.UFConstants
-
- UF_WAVE_ERROR_RANGE - Static variable in class nxopen.uf.UFConstants
-
- UF_WAVE_faces_not_on_same_body - Static variable in class nxopen.uf.UFConstants
-
- UF_WAVE_interpart_only - Static variable in class nxopen.uf.UFConstants
-
- UF_WAVE_link_not_broken - Static variable in class nxopen.uf.UFConstants
-
- UF_WAVE_mirror_or_region - Static variable in class nxopen.uf.UFConstants
-
- UF_WAVE_mirror_region_or_point - Static variable in class nxopen.uf.UFConstants
-
- UF_WAVE_NO_ERRORS - Static variable in class nxopen.uf.UFConstants
-
- UF_WAVE_not_a_mirror - Static variable in class nxopen.uf.UFConstants
-
- UF_WAVE_not_a_point - Static variable in class nxopen.uf.UFConstants
-
- UF_WAVE_not_a_region - Static variable in class nxopen.uf.UFConstants
-
- UF_WAVE_not_interpart_link - Static variable in class nxopen.uf.UFConstants
-
- UF_WAVE_part_load_failed - Static variable in class nxopen.uf.UFConstants
-
- UF_wedm_orient_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_WEIGHT_bad_accuracy - Static variable in class nxopen.uf.UFConstants
-
- UF_WEIGHT_bad_area_state - Static variable in class nxopen.uf.UFConstants
-
- UF_WEIGHT_bad_cache_state - Static variable in class nxopen.uf.UFConstants
-
- UF_WEIGHT_bad_cofm_state - Static variable in class nxopen.uf.UFConstants
-
- UF_WEIGHT_bad_density_state - Static variable in class nxopen.uf.UFConstants
-
- UF_WEIGHT_bad_mass_state - Static variable in class nxopen.uf.UFConstants
-
- UF_WEIGHT_bad_mofi_state - Static variable in class nxopen.uf.UFConstants
-
- UF_WEIGHT_bad_properties - Static variable in class nxopen.uf.UFConstants
-
- UF_WEIGHT_bad_volume_state - Static variable in class nxopen.uf.UFConstants
-
- UF_WEIGHT_ERROR_BASE - Static variable in class nxopen.uf.UFConstants
-
- UF_WEIGHT_ERROR_RANGE - Static variable in class nxopen.uf.UFConstants
-
- UF_WEIGHT_has_no_assertion - Static variable in class nxopen.uf.UFConstants
-
- UF_WEIGHT_incompatible_units - Static variable in class nxopen.uf.UFConstants
-
- UF_WEIGHT_mvd_incompatible - Static variable in class nxopen.uf.UFConstants
-
- UF_WEIGHT_NO_ERRORS - Static variable in class nxopen.uf.UFConstants
-
- UF_WEIGHT_not_in_work_part - Static variable in class nxopen.uf.UFConstants
-
- UF_WEIGHT_part_load_failed - Static variable in class nxopen.uf.UFConstants
-
- UF_WELD_TYPE_COUNT - Static variable in class nxopen.uf.UFConstants
-
- UF_WRAP_GEOM_CLOSE_BEVELED - Static variable in class nxopen.uf.UFConstants
-
- UF_WRAP_GEOM_CLOSE_NONE - Static variable in class nxopen.uf.UFConstants
-
- UF_WRAP_GEOM_CLOSE_SHARP - Static variable in class nxopen.uf.UFConstants
-
- UF_xform_type - Static variable in class nxopen.uf.UFConstants
-
- UF_zone_box_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_zone_display_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_zone_plane_subtype - Static variable in class nxopen.uf.UFConstants
-
- UF_zone_type - Static variable in class nxopen.uf.UFConstants
-
- UFAbort - Interface in nxopen.uf
-
Contains wrappers for all 'UFAbort' functions and data types.
- UFAssem - Interface in nxopen.uf
-
Contains wrappers for all 'UFAssem' functions and data types.
- UFAssem.AddPartToAssemblyData - Class in nxopen.uf
-
- UFAssem.AskArrangementsInPartData - Class in nxopen.uf
-
- UFAssem.AskArraysInPartData - Class in nxopen.uf
-
- UFAssem.AskArraysOfInstData - Class in nxopen.uf
-
- UFAssem.AskBodiesOfAssemblyCutData - Class in nxopen.uf
-
- UFAssem.AskCompExplosionData - Class in nxopen.uf
-
- UFAssem.AskComponentData - Class in nxopen.uf
-
- UFAssem.AskDefaultRefSetsData - Class in nxopen.uf
-
- UFAssem.AskExplosionsData - Class in nxopen.uf
-
- UFAssem.AskHiddenCompsData - Class in nxopen.uf
-
- UFAssem.AskIsetArrayData - Class in nxopen.uf
-
- UFAssem.AskLastFilterData - Class in nxopen.uf
-
- UFAssem.AskMcArrayData - Class in nxopen.uf
-
- UFAssem.AskOrientationData - Class in nxopen.uf
-
- UFAssem.AskPartOccSuppressStateData - Class in nxopen.uf
-
- UFAssem.AskPartOccurrenceOfStepData - Class in nxopen.uf
-
- UFAssem.AskRefSetData - Class in nxopen.uf
-
- UFAssem.AskRefSetMembersData - Class in nxopen.uf
-
- UFAssem.AskRefSetsData - Class in nxopen.uf
-
- UFAssem.AskSearchDirectoriesData - Class in nxopen.uf
-
- UFAssem.AskSequencesInPartData - Class in nxopen.uf
-
- UFAssem.AskStepElementDurationsData - Class in nxopen.uf
-
- UFAssem.AskStepsData - Class in nxopen.uf
-
- UFAssem.AskStepsOfPartOccData - Class in nxopen.uf
-
- UFAssem.AskUnprocessedPartoccsData - Class in nxopen.uf
-
- UFAssem.AssemblyDeformPartData - Class in nxopen.uf
-
- UFAssem.CaptureArrangementFromCurrentSequenceData - Class in nxopen.uf
-
- UFAssem.CaptureArrangementFromCurrentSequenceExtendedData - Class in nxopen.uf
-
- UFAssem.ConvertPrev16AlignsData - Class in nxopen.uf
-
- UFAssem.DeformData - Class in nxopen.uf
-
- UFAssem.DeformedDefinitionData - Class in nxopen.uf
-
- UFAssem.DeformPartData - Class in nxopen.uf
-
- UFAssem.DeformPartWarnings - Class in nxopen.uf
-
- UFAssem.EvalInstanceIntentData - Class in nxopen.uf
-
- UFAssem.ExplStatus - Class in nxopen.uf
-
- UFAssem.FindImmedOldCompsData - Class in nxopen.uf
-
- UFAssem.FindPrev16AlignsToCheckData - Class in nxopen.uf
-
- UFAssem.InstanceIntent - Class in nxopen.uf
-
- UFAssem.InstanceStatus - Class in nxopen.uf
-
- UFAssem.IsetArrayData - Class in nxopen.uf
-
- UFAssem.LevelOption - Class in nxopen.uf
-
- UFAssem.McArrayData - Class in nxopen.uf
-
- UFAssem.Options - Class in nxopen.uf
-
- UFAssem.Prev16Align - Class in nxopen.uf
-
- UFAssem.SubstituteComponentData - Class in nxopen.uf
-
- UFAssem.UpgradeStatus - Class in nxopen.uf
-
- UFAttr - Interface in nxopen.uf
-
Contains wrappers for all 'UFAttr' functions and data types.
- UFAttr.GetBoolUserAttributeData - Class in nxopen.uf
-
- UFAttr.GetComputationalTimeUserAttributeData - Class in nxopen.uf
-
- UFAttr.GetIntegerUserAttributeData - Class in nxopen.uf
-
- UFAttr.GetRealUserAttributeData - Class in nxopen.uf
-
- UFAttr.GetReferenceStringOfUserAttributeData - Class in nxopen.uf
-
- UFAttr.GetStringTimeUserAttributeData - Class in nxopen.uf
-
- UFAttr.GetStringUserAttributeData - Class in nxopen.uf
-
- UFBound - Interface in nxopen.uf
-
Contains wrappers for all 'UFBound' functions and data types.
- UFBound.AllData - Class in nxopen.uf
-
- UFBound.MemberData - Class in nxopen.uf
-
- UFBound.Object - Class in nxopen.uf
-
- UFBound.Tolerance - Class in nxopen.uf
-
- UFBrep - Interface in nxopen.uf
-
Contains wrappers for all 'UFBrep' functions and data types.
- UFBrep.GeomType - Class in nxopen.uf
-
- UFBrep.Mapping - Class in nxopen.uf
-
- UFBrep.Options - Class in nxopen.uf
-
- UFBrep.Orientation - Class in nxopen.uf
-
- UFBrep.TopoSource - Class in nxopen.uf
-
- UFBrep.TopoType - Class in nxopen.uf
-
- UFCam - Interface in nxopen.uf
-
Contains wrappers for all 'UFCam' functions and data types.
- UFCam.AskAutoBlankData - Class in nxopen.uf
-
- UFCam.AskClearPlaneData - Class in nxopen.uf
-
- UFCam.AskLowerLimitPlaneData - Class in nxopen.uf
-
- UFCam.AvoidanceType - Class in nxopen.uf
-
- UFCam.BlankGeomType - Class in nxopen.uf
-
- UFCam.BoundaryType - Class in nxopen.uf
-
- UFCam.FeedrateUnit - Class in nxopen.uf
-
- UFCam.GeomType - Class in nxopen.uf
-
- UFCam.MaterialSide - Class in nxopen.uf
-
- UFCam.OptAskClsfNamesData - Class in nxopen.uf
-
- UFCam.OptAskDocNamesData - Class in nxopen.uf
-
- UFCam.OptAskPostNamesData - Class in nxopen.uf
-
- UFCam.OptAskSubtypesData - Class in nxopen.uf
-
- UFCam.OptAskTypesData - Class in nxopen.uf
-
- UFCam.OptStypeCls - Class in nxopen.uf
-
- UFCam.Preferences - Class in nxopen.uf
-
- UFCam.ToolPosition - Class in nxopen.uf
-
- UFCambnd - Interface in nxopen.uf
-
Contains wrappers for all 'UFCambnd' functions and data types.
- UFCambnd.AppData - Class in nxopen.uf
-
- UFCambnd.AskBoundariesData - Class in nxopen.uf
-
- UFCambnd.AskBoundaryItemsData - Class in nxopen.uf
-
- UFCambnd.BoundaryData - Class in nxopen.uf
-
- UFCambnd.UdeSetType - Class in nxopen.uf
-
- UFCambndWedm - Interface in nxopen.uf
-
Contains wrappers for all 'UFCambndWedm' functions and data types.
- UFCambndWedm.AppendItemUdeData - Class in nxopen.uf
-
- UFCamgeom - Interface in nxopen.uf
-
Contains wrappers for all 'UFCamgeom' functions and data types.
- UFCamgeom.AppData - Class in nxopen.uf
-
- UFCamgeom.AskCollectorItemsData - Class in nxopen.uf
-
- UFCamgeom.AskItemsData - Class in nxopen.uf
-
- UFCamgeom.CustomPoint - Class in nxopen.uf
-
- UFCamgeom.CustomPointType - Class in nxopen.uf
-
- UFCamPref - Interface in nxopen.uf
-
Contains wrappers for all 'UFCamPref' functions and data types.
- UFCamPref.CamPref - Class in nxopen.uf
-
- UFCamPrepro - Interface in nxopen.uf
-
Contains wrappers for all 'UFCamPrepro' functions and data types.
- UFCamtext - Interface in nxopen.uf
-
Contains wrappers for all 'UFCamtext' functions and data types.
- UFCfi - Interface in nxopen.uf
-
Contains wrappers for all 'UFCfi' functions and data types.
- UFCfi.SpawnCheckStatusData - Class in nxopen.uf
-
- UFCgm - Interface in nxopen.uf
-
Contains wrappers for all 'UFCgm' functions and data types.
- UFCgm.Color - Class in nxopen.uf
-
- UFCgm.Colors - Class in nxopen.uf
-
- UFCgm.CustomColors - Class in nxopen.uf
-
- UFCgm.CustomWidths - Class in nxopen.uf
-
- UFCgm.Dimensions - Class in nxopen.uf
-
- UFCgm.ExportOptions - Class in nxopen.uf
-
- UFCgm.ExportReason - Class in nxopen.uf
-
- UFCgm.Fonts - Class in nxopen.uf
-
- UFCgm.ImportOptions - Class in nxopen.uf
-
- UFCgm.Size - Class in nxopen.uf
-
- UFCgm.SizeMode - Class in nxopen.uf
-
- UFCgm.TextMode - Class in nxopen.uf
-
- UFCgm.Units - Class in nxopen.uf
-
- UFCgm.VdcMode - Class in nxopen.uf
-
- UFCgm.WidthColor - Class in nxopen.uf
-
- UFCgm.WidthCustom - Class in nxopen.uf
-
- UFCgm.Widths - Class in nxopen.uf
-
- UFCgm.WidthSingle - Class in nxopen.uf
-
- UFCgm.WidthUse - Class in nxopen.uf
-
- UFClear - Interface in nxopen.uf
-
Contains wrappers for all 'UFClear' functions and data types.
- UFClear.AskNextInterfData - Class in nxopen.uf
-
- UFClear.AskObjAllButListData - Class in nxopen.uf
-
- UFClear.AskObjectClearZoneData - Class in nxopen.uf
-
- UFClear.AskObjListData - Class in nxopen.uf
-
- UFClear.AskPairClearZoneData - Class in nxopen.uf
-
- UFClear.InterfData - Class in nxopen.uf
-
- UFClear.IsPairIncludedData - Class in nxopen.uf
-
- UFClear.Pref - Class in nxopen.uf
-
- UFClear.Summary - Class in nxopen.uf
-
- UFClone - Interface in nxopen.uf
-
Contains wrappers for all 'UFClone' functions and data types.
- UFClone.Action - Class in nxopen.uf
-
- UFClone.AskAttributeValuesData - Class in nxopen.uf
-
- UFClone.AskCiCommentCheckingData - Class in nxopen.uf
-
- UFClone.AskCvtCallbacksData - Class in nxopen.uf
-
- UFClone.AskDefCiCommentCheckingData - Class in nxopen.uf
-
- UFClone.AskNamingData - Class in nxopen.uf
-
- UFClone.AskNtfyCallbacksData - Class in nxopen.uf
-
- UFClone.Base64ToBytesData - Class in nxopen.uf
-
- UFClone.CheckinData - Class in nxopen.uf
-
- UFClone.CheckoutData - Class in nxopen.uf
-
- UFClone.CloneRelCae - Class in nxopen.uf
-
- UFClone.ConvertCb - Class in nxopen.uf
-
- UFClone.CopyNmOpt - Class in nxopen.uf
-
- UFClone.ExLogOpts - Class in nxopen.uf
-
- UFClone.FamilyTreatment - Class in nxopen.uf
-
- UFClone.GenLogOpts - Class in nxopen.uf
-
- UFClone.LoadLogfileData - Class in nxopen.uf
-
- UFClone.LogFileFailure - Class in nxopen.uf
-
- UFClone.NameRuleDef - Class in nxopen.uf
-
- UFClone.NameRuleType - Class in nxopen.uf
-
- UFClone.NamingFailures - Class in nxopen.uf
-
- UFClone.NamingTechnique - Class in nxopen.uf
-
- UFClone.NotifyCb - Class in nxopen.uf
-
- UFClone.OperationClass - Class in nxopen.uf
-
- UFClone.PartStateS - Class in nxopen.uf
-
- UFClone.ValidationMode - Class in nxopen.uf
-
- UFClone.ValidationOpts - Class in nxopen.uf
-
- UFClsf - Interface in nxopen.uf
-
Contains wrappers for all 'UFClsf' functions and data types.
- UFConstants - Class in nxopen.uf
-
Contains definitions of constants for use by uf methods.
- UFConstants() - Constructor for class nxopen.uf.UFConstants
-
- UFCsys - Interface in nxopen.uf
-
Contains wrappers for all 'UFCsys' functions and data types.
- UFCsys.AskCsysInfoData - Class in nxopen.uf
-
- UFCurve - Interface in nxopen.uf
-
Contains wrappers for all 'UFCurve' functions and data types.
- UFCurve.AnalysisDisplay - Class in nxopen.uf
-
- UFCurve.Arc - Class in nxopen.uf
-
- UFCurve.AskCombineCurvesData - Class in nxopen.uf
-
- UFCurve.AskCurveInflectionsData - Class in nxopen.uf
-
- UFCurve.AskFeatureCurvesData - Class in nxopen.uf
-
- UFCurve.AskIntCurveParentsData - Class in nxopen.uf
-
- UFCurve.AskIntCurvesData - Class in nxopen.uf
-
- UFCurve.AskIntParmsData - Class in nxopen.uf
-
- UFCurve.AskIntParmsScData - Class in nxopen.uf
-
- UFCurve.AskIsoclineData - Class in nxopen.uf
-
- UFCurve.AskJoinedParmsData - Class in nxopen.uf
-
- UFCurve.AskOffsetCurvesData - Class in nxopen.uf
-
- UFCurve.AskOffsetDirection2Data - Class in nxopen.uf
-
- UFCurve.AskOffsetDirectionData - Class in nxopen.uf
-
- UFCurve.AskParameterizationData - Class in nxopen.uf
-
- UFCurve.AskProjCurveParentsData - Class in nxopen.uf
-
- UFCurve.AskProjCurvesData - Class in nxopen.uf
-
- UFCurve.AskSplineSapData - Class in nxopen.uf
-
- UFCurve.AskSplineThruPtsData - Class in nxopen.uf
-
- UFCurve.AskWrapCurveParentsData - Class in nxopen.uf
-
- UFCurve.AskWrapCurvesData - Class in nxopen.uf
-
- UFCurve.AssoArcSubtype - Class in nxopen.uf
-
- UFCurve.Bcmmcp - Class in nxopen.uf
-
- UFCurve.BridgeData - Class in nxopen.uf
-
- UFCurve.BridgeMethod - Class in nxopen.uf
-
- UFCurve.CombineCurvesDirection - Class in nxopen.uf
-
- UFCurve.Conic - Class in nxopen.uf
-
- UFCurve.Constraint - Class in nxopen.uf
-
- UFCurve.ConstraintType - Class in nxopen.uf
-
- UFCurve.ConvertConicToStdData - Class in nxopen.uf
-
- UFCurve.CreateJoinedCurveData - Class in nxopen.uf
-
- UFCurve.CreateJoinedFeatureData - Class in nxopen.uf
-
- UFCurve.CreateShadowCurvesData - Class in nxopen.uf
-
- UFCurve.CreateSilhouetteData - Class in nxopen.uf
-
- UFCurve.CreateSimplifiedCurveData - Class in nxopen.uf
-
- UFCurve.CreateSplineData - Class in nxopen.uf
-
- UFCurve.Direction - Class in nxopen.uf
-
- UFCurve.DirectionStructU - Class in nxopen.uf
-
- UFCurve.EndType - Class in nxopen.uf
-
- UFCurve.FitError - Class in nxopen.uf
-
- UFCurve.FixSplineData - Class in nxopen.uf
-
- UFCurve.Genconic - Class in nxopen.uf
-
- UFCurve.HelpData - Class in nxopen.uf
-
- UFCurve.HelpDataType - Class in nxopen.uf
-
- UFCurve.IntersectInfo - Class in nxopen.uf
-
- UFCurve.JoinTypes - Class in nxopen.uf
-
- UFCurve.Limit - Class in nxopen.uf
-
- UFCurve.LimitType - Class in nxopen.uf
-
- UFCurve.Line - Class in nxopen.uf
-
- UFCurve.LineArc - Class in nxopen.uf
-
- UFCurve.LineArcType - Class in nxopen.uf
-
- UFCurve.OcfAskCurvesData - Class in nxopen.uf
-
- UFCurve.OcfCrossBoundaries - Class in nxopen.uf
-
- UFCurve.OcfData - Class in nxopen.uf
-
- UFCurve.OcfFaceData - Class in nxopen.uf
-
- UFCurve.OcfMethod - Class in nxopen.uf
-
- UFCurve.OcfOffsetPtDirectionData - Class in nxopen.uf
-
- UFCurve.OcfSpanMethod - Class in nxopen.uf
-
- UFCurve.OcfStringData - Class in nxopen.uf
-
- UFCurve.OcfTrimMethod - Class in nxopen.uf
-
- UFCurve.OcfValues - Class in nxopen.uf
-
- UFCurve.OffsetType - Class in nxopen.uf
-
- UFCurve.PrincipalAxis - Class in nxopen.uf
-
- UFCurve.Proj - Class in nxopen.uf
-
- UFCurve.Proj1 - Class in nxopen.uf
-
- UFCurve.PtSlopeCrvatr - Class in nxopen.uf
-
- UFCurve.SectionAskParallelData - Class in nxopen.uf
-
- UFCurve.SectionAskPerpcrvData - Class in nxopen.uf
-
- UFCurve.SectionAskPlanesData - Class in nxopen.uf
-
- UFCurve.SectionAskRadialData - Class in nxopen.uf
-
- UFCurve.SectionCurveAskParentsData - Class in nxopen.uf
-
- UFCurve.SectionGeneralData - Class in nxopen.uf
-
- UFCurve.SectionParallelData - Class in nxopen.uf
-
- UFCurve.SectionPerpcrvData - Class in nxopen.uf
-
- UFCurve.SectionPlanesData - Class in nxopen.uf
-
- UFCurve.SectionRadialData - Class in nxopen.uf
-
- UFCurve.SmoothSplineData - Class in nxopen.uf
-
- UFCurve.SmoothSplineDataStData - Class in nxopen.uf
-
- UFCurve.Spline - Class in nxopen.uf
-
- UFCurve.State - Class in nxopen.uf
-
- UFCurve.TrimMult - Class in nxopen.uf
-
- UFCurve.TrimOpts - Class in nxopen.uf
-
- UFCurve.WrapData - Class in nxopen.uf
-
- UFCurve.WrapType - Class in nxopen.uf
-
- UFCurveLineArc - Interface in nxopen.uf
-
Contains wrappers for all 'UFCurveLineArc' functions and data types.
- ufCurveString - Variable in class nxopen.uf.UFCurve.AskJoinedParmsData
-
- UFCutLevels - Interface in nxopen.uf
-
Contains wrappers for all 'UFCutLevels' functions and data types.
- UFCutLevels.CutLevels - Class in nxopen.uf
-
- UFCutLevels.Single - Class in nxopen.uf
-
- UFCutter - Interface in nxopen.uf
-
Contains wrappers for all 'UFCutter' functions and data types.
- UFCutter.AskTypeAndSubtypeData - Class in nxopen.uf
-
- UFCutter.HolderSection - Class in nxopen.uf
-
- UFCutter.TrackingPointData - Class in nxopen.uf
-
- UFCutter.TurnTrackingPointData - Class in nxopen.uf
-
- UFDbcMld - Interface in nxopen.uf
-
Contains wrappers for all 'UFDbcMld' functions and data types.
- UFDie - Interface in nxopen.uf
-
Contains wrappers for all 'UFDie' functions and data types.
- UFDie.AskDrawFacesData - Class in nxopen.uf
-
- UFDie.AskMaterialPropertiesData - Class in nxopen.uf
-
- UFDieeng - Interface in nxopen.uf
-
Contains wrappers for all 'UFDieeng' functions and data types.
- UFDieeng.Opts - Class in nxopen.uf
-
- UFDirpath - Interface in nxopen.uf
-
Contains wrappers for all 'UFDirpath' functions and data types.
- UFDirpath.AskDirsData - Class in nxopen.uf
-
- UFDisp - Interface in nxopen.uf
-
Contains wrappers for all 'UFDisp' functions and data types.
- UFDisp.AskColorData - Class in nxopen.uf
-
- UFDisp.AskCurrentlySelectedMaterialData - Class in nxopen.uf
-
- UFDisp.AskGeometryOfMaterialData - Class in nxopen.uf
-
- UFDisp.AskMaterialData - Class in nxopen.uf
-
- UFDisp.AskTextureSpaceInfoData - Class in nxopen.uf
-
- UFDisp.BackgroundColor - Class in nxopen.uf
-
- UFDisp.ColorName - Class in nxopen.uf
-
- UFDisp.ComputeModelBoundsData - Class in nxopen.uf
-
- UFDisp.ConeheadAttrbSTag - Class in nxopen.uf
-
- UFDisp.Context - Class in nxopen.uf
-
- UFDisp.CopyMaterialData - Class in nxopen.uf
-
- UFDisp.DrawingDisplayData - Class in nxopen.uf
-
- UFDisp.Grid - Class in nxopen.uf
-
- UFDisp.GridContext - Class in nxopen.uf
-
- UFDisp.GridType - Class in nxopen.uf
-
- UFDisp.ImageFormat - Class in nxopen.uf
-
- UFDisp.Inquire - Class in nxopen.uf
-
- UFDisp.J3dEntity - Class in nxopen.uf
-
- UFDisp.J3dGeometryData - Class in nxopen.uf
-
- UFDisp.MaterialSource - Class in nxopen.uf
-
- UFDisp.PolyMarker - Class in nxopen.uf
-
- UFDisp.ShadeDisplay - Class in nxopen.uf
-
- UFDisp.ShadeFormat - Class in nxopen.uf
-
- UFDisp.ShadeMethod - Class in nxopen.uf
-
- UFDisp.ShadeOptions - Class in nxopen.uf
-
- UFDisp.ShadePlot - Class in nxopen.uf
-
- UFDisp.SrfanlData - Class in nxopen.uf
-
- UFDisp.SystemParams - Class in nxopen.uf
-
- UFDisp.TextRef - Class in nxopen.uf
-
- UFDisp.TextureSpaceInfo - Class in nxopen.uf
-
- UFDisp.TextureSpaceType - Class in nxopen.uf
-
- UFDisp.ViewType - Class in nxopen.uf
-
- UFDisp.WmfOutput - Class in nxopen.uf
-
- UFDpud - Interface in nxopen.uf
-
Contains wrappers for all 'UFDpud' functions and data types.
- UFDpud.ProjOption - Class in nxopen.uf
-
- UFDpud.Purpose - Class in nxopen.uf
-
- UFDpud.TaxisOption - Class in nxopen.uf
-
- UFDraw - Interface in nxopen.uf
-
Contains wrappers for all 'UFDraw' functions and data types.
- UFDraw.ArrowParms - Class in nxopen.uf
-
- UFDraw.ArwHeadCntl - Class in nxopen.uf
-
- UFDraw.ArwHeadType - Class in nxopen.uf
-
- UFDraw.AskBodySilsInViewData - Class in nxopen.uf
-
- UFDraw.AskBoundaryCurvesData - Class in nxopen.uf
-
- UFDraw.AskBoundByObjectsData - Class in nxopen.uf
-
- UFDraw.AskBreakoutData - Class in nxopen.uf
-
- UFDraw.AskBreakRegionsData - Class in nxopen.uf
-
- UFDraw.AskCurveGroupMembersData - Class in nxopen.uf
-
- UFDraw.AskDisplayedObjectsData - Class in nxopen.uf
-
- UFDraw.AskDrawingsData - Class in nxopen.uf
-
- UFDraw.AskFaceSilsInViewData - Class in nxopen.uf
-
- UFDraw.AskGroupOfCurveData - Class in nxopen.uf
-
- UFDraw.AskHalfSxlineData - Class in nxopen.uf
-
- UFDraw.AskPictorialSxlineData - Class in nxopen.uf
-
- UFDraw.AskRenderSetObjectsData - Class in nxopen.uf
-
- UFDraw.AskRenderSetsData - Class in nxopen.uf
-
- UFDraw.AskRenderSetsOfViewData - Class in nxopen.uf
-
- UFDraw.AskRevolvedSxlineData - Class in nxopen.uf
-
- UFDraw.AskSimpleSxlineData - Class in nxopen.uf
-
- UFDraw.AskSimplifiedCurveData - Class in nxopen.uf
-
- UFDraw.AskSteppedSxlineData - Class in nxopen.uf
-
- UFDraw.AskSxedgesOfSxsolidData - Class in nxopen.uf
-
- UFDraw.AskSxlineDefaultPrfsData - Class in nxopen.uf
-
- UFDraw.AskSxlineDisplayData - Class in nxopen.uf
-
- UFDraw.AskSxlineSxsegData - Class in nxopen.uf
-
- UFDraw.AskSxsolidsOfSxviewData - Class in nxopen.uf
-
- UFDraw.AskTabularNoteParamsData - Class in nxopen.uf
-
- UFDraw.AskUnfoldedSxlineData - Class in nxopen.uf
-
- UFDraw.AskViewNotesData - Class in nxopen.uf
-
- UFDraw.AskViewParmScaleData - Class in nxopen.uf
-
- UFDraw.AskViewScaleData - Class in nxopen.uf
-
- UFDraw.AskViewsData - Class in nxopen.uf
-
- UFDraw.BoundaryType - Class in nxopen.uf
-
- UFDraw.BreakoutData - Class in nxopen.uf
-
- UFDraw.BreakPositionType - Class in nxopen.uf
-
- UFDraw.BreakRegionBoundary - Class in nxopen.uf
-
- UFDraw.BreakRegionData - Class in nxopen.uf
-
- UFDraw.CompSectionInView - Class in nxopen.uf
-
- UFDraw.CreateSimplifiedCurveData - Class in nxopen.uf
-
- UFDraw.DefineBoundary - Class in nxopen.uf
-
- UFDraw.EdgeHidingEdge - Class in nxopen.uf
-
- UFDraw.ExtractedEdges - Class in nxopen.uf
-
- UFDraw.Gap - Class in nxopen.uf
-
- UFDraw.HalfSxsegs - Class in nxopen.uf
-
- UFDraw.HiddenLine - Class in nxopen.uf
-
- UFDraw.LabelOnParentType - Class in nxopen.uf
-
- UFDraw.ProjDir - Class in nxopen.uf
-
- UFDraw.ProjectionAngle - Class in nxopen.uf
-
- UFDraw.ReadTabnotCellData - Class in nxopen.uf
-
- UFDraw.RenderPrefs - Class in nxopen.uf
-
- UFDraw.RetrieveDrawingCgmData - Class in nxopen.uf
-
- UFDraw.SecondaryIndexingAlign - Class in nxopen.uf
-
- UFDraw.SetBoundaryAssocData - Class in nxopen.uf
-
- UFDraw.Silhouette - Class in nxopen.uf
-
- UFDraw.SizeState - Class in nxopen.uf
-
- UFDraw.Smooth - Class in nxopen.uf
-
- UFDraw.SxAssyXhatch - Class in nxopen.uf
-
- UFDraw.SxBackground - Class in nxopen.uf
-
- UFDraw.SxCrosshatch - Class in nxopen.uf
-
- UFDraw.SxlineDisplay - Class in nxopen.uf
-
- UFDraw.SxlineLeg - Class in nxopen.uf
-
- UFDraw.SxlineStatus - Class in nxopen.uf
-
- UFDraw.SxlineSxsegs - Class in nxopen.uf
-
- UFDraw.SxlineType - Class in nxopen.uf
-
- UFDraw.SxSectionSheetBody - Class in nxopen.uf
-
- UFDraw.SxsegHighlight - Class in nxopen.uf
-
- UFDraw.SxsegInfo - Class in nxopen.uf
-
- UFDraw.SxsegMode - Class in nxopen.uf
-
- UFDraw.SxsegType - Class in nxopen.uf
-
- UFDraw.SxviewPrfs - Class in nxopen.uf
-
- UFDraw.TabnotBorderType - Class in nxopen.uf
-
- UFDraw.TabnotCell - Class in nxopen.uf
-
- UFDraw.TabnotCellEvalData - Class in nxopen.uf
-
- UFDraw.TabnotCellParams - Class in nxopen.uf
-
- UFDraw.TabnotEvalData - Class in nxopen.uf
-
- UFDraw.TabnotJust - Class in nxopen.uf
-
- UFDraw.TabnotLine - Class in nxopen.uf
-
- UFDraw.TabnotParams - Class in nxopen.uf
-
- UFDraw.Uvhatch - Class in nxopen.uf
-
- UFDraw.ViewBoundary - Class in nxopen.uf
-
- UFDraw.ViewInfo - Class in nxopen.uf
-
- UFDraw.ViewLabelLetterFormat - Class in nxopen.uf
-
- UFDraw.ViewLabelParms - Class in nxopen.uf
-
- UFDraw.ViewLabelParmType - Class in nxopen.uf
-
- UFDraw.ViewLabelPosition - Class in nxopen.uf
-
- UFDraw.ViewLabelScaleFormat - Class in nxopen.uf
-
- UFDraw.ViewLabelScalePosition - Class in nxopen.uf
-
- UFDraw.ViewLabelViewTextType - Class in nxopen.uf
-
- UFDraw.ViewPrfs - Class in nxopen.uf
-
- UFDraw.ViewStatus - Class in nxopen.uf
-
- UFDraw.VirtualIntersect - Class in nxopen.uf
-
- UFDrf - Interface in nxopen.uf
-
Contains wrappers for all 'UFDrf' functions and data types.
- UFDrf.AlignPosition - Class in nxopen.uf
-
- UFDrf.AngularSuppressZeros - Class in nxopen.uf
-
- UFDrf.AngularUnits - Class in nxopen.uf
-
- UFDrf.AppendedText - Class in nxopen.uf
-
- UFDrf.AppendedTextLocation - Class in nxopen.uf
-
- UFDrf.ArcInfo - Class in nxopen.uf
-
- UFDrf.Areafill - Class in nxopen.uf
-
- UFDrf.AreaFillMaterial - Class in nxopen.uf
-
- UFDrf.ArrowDisplay - Class in nxopen.uf
-
- UFDrf.ArrowFillType - Class in nxopen.uf
-
- UFDrf.ArrowheadAndFillType - Class in nxopen.uf
-
- UFDrf.ArrowInfo - Class in nxopen.uf
-
- UFDrf.ArrowType - Class in nxopen.uf
-
- UFDrf.AskAngObjUnitsFormatData - Class in nxopen.uf
-
- UFDrf.AskAnnArcSegAnglesData - Class in nxopen.uf
-
- UFDrf.AskAnnData - Class in nxopen.uf
-
- UFDrf.AskAnnLineSegEndsData - Class in nxopen.uf
-
- UFDrf.AskAnnotationTextBoxData - Class in nxopen.uf
-
- UFDrf.AskAppendedTextData - Class in nxopen.uf
-
- UFDrf.AskArrowData - Class in nxopen.uf
-
- UFDrf.AskAssociativeOriginData - Class in nxopen.uf
-
- UFDrf.AskAssociativityData - Class in nxopen.uf
-
- UFDrf.AskBoundariesData - Class in nxopen.uf
-
- UFDrf.AskCalloutRowMembersData - Class in nxopen.uf
-
- UFDrf.AskCenterlineInfoData - Class in nxopen.uf
-
- UFDrf.AskDimensionsOfSetData - Class in nxopen.uf
-
- UFDrf.AskDimensionTextData - Class in nxopen.uf
-
- UFDrf.AskDimInfoData - Class in nxopen.uf
-
- UFDrf.AskDispParmsData - Class in nxopen.uf
-
- UFDrf.AskDraftAidTextInfoData - Class in nxopen.uf
-
- UFDrf.AskEmbeddedUdsFontInfoData - Class in nxopen.uf
-
- UFDrf.AskGdtSymbolInfoData - Class in nxopen.uf
-
- UFDrf.AskIdSymbolGeometryData - Class in nxopen.uf
-
- UFDrf.AskIdSymbolInfoData - Class in nxopen.uf
-
- UFDrf.AskLabelInfoData - Class in nxopen.uf
-
- UFDrf.AskObjectPreferencesData - Class in nxopen.uf
-
- UFDrf.AskObjectsControlledByExpData - Class in nxopen.uf
-
- UFDrf.AskOrdoriginInfoData - Class in nxopen.uf
-
- UFDrf.AskPreferencesData - Class in nxopen.uf
-
- UFDrf.AskRetainColorFontWidthData - Class in nxopen.uf
-
- UFDrf.AskSymbolDataFromNameData - Class in nxopen.uf
-
- UFDrf.AskSymbolMirrorAndFlipData - Class in nxopen.uf
-
- UFDrf.AskTextData - Class in nxopen.uf
-
- UFDrf.AskUdSymbolFontInfoData - Class in nxopen.uf
-
- UFDrf.AskWeldSymbolData - Class in nxopen.uf
-
- UFDrf.AssociativeOrigin - Class in nxopen.uf
-
- UFDrf.AssociativeOriginType - Class in nxopen.uf
-
- UFDrf.AssocInfo - Class in nxopen.uf
-
- UFDrf.AssocLineType - Class in nxopen.uf
-
- UFDrf.AssocType - Class in nxopen.uf
-
- UFDrf.AssortpartArc - Class in nxopen.uf
-
- UFDrf.AssortpartArrow - Class in nxopen.uf
-
- UFDrf.AssortpartLine - Class in nxopen.uf
-
- UFDrf.AssortpartText - Class in nxopen.uf
-
- UFDrf.CenterlineInfo - Class in nxopen.uf
-
- UFDrf.Cfw - Class in nxopen.uf
-
- UFDrf.ChamferDimensionData - Class in nxopen.uf
-
- UFDrf.ChamferDimensionForm - Class in nxopen.uf
-
- UFDrf.ChamferDimensionLeaderType - Class in nxopen.uf
-
- UFDrf.ChamferDimensionStubType - Class in nxopen.uf
-
- UFDrf.ChamferDimensionSymbolType - Class in nxopen.uf
-
- UFDrf.CreateXhatchData - Class in nxopen.uf
-
- UFDrf.CustomSymbol - Class in nxopen.uf
-
- UFDrf.CustomSymbolText - Class in nxopen.uf
-
- UFDrf.CustomSymbolTextType - Class in nxopen.uf
-
- UFDrf.DecimalPointCharacter - Class in nxopen.uf
-
- UFDrf.DiameterRadiusPlacement - Class in nxopen.uf
-
- UFDrf.DiameterRadiusPreferences - Class in nxopen.uf
-
- UFDrf.DiameterSymbol - Class in nxopen.uf
-
- UFDrf.DimensionOrientation - Class in nxopen.uf
-
- UFDrf.DimensionPreferences - Class in nxopen.uf
-
- UFDrf.DimensionPreferences1 - Class in nxopen.uf
-
- UFDrf.DimInfo - Class in nxopen.uf
-
- UFDrf.DimLineInfo - Class in nxopen.uf
-
- UFDrf.DoglegInfo - Class in nxopen.uf
-
- UFDrf.DoglegType - Class in nxopen.uf
-
- UFDrf.DraftAidLine - Class in nxopen.uf
-
- UFDrf.DraftAidText - Class in nxopen.uf
-
- UFDrf.DraftAidTextInfo - Class in nxopen.uf
-
- UFDrf.DualDimensionFormat - Class in nxopen.uf
-
- UFDrf.ExtensionLineDisplay - Class in nxopen.uf
-
- UFDrf.FoldedRadiusInfo - Class in nxopen.uf
-
- UFDrf.FractionDenominator - Class in nxopen.uf
-
- UFDrf.FractionType - Class in nxopen.uf
-
- UFDrf.FrameCorner - Class in nxopen.uf
-
- UFDrf.FrdimData - Class in nxopen.uf
-
- UFDrf.GdtLeader - Class in nxopen.uf
-
- UFDrf.GdtLeaderData - Class in nxopen.uf
-
- UFDrf.GdtSymbolInfo - Class in nxopen.uf
-
- UFDrf.GetSymbolDividerData - Class in nxopen.uf
-
- UFDrf.GetTextBarsData - Class in nxopen.uf
-
- UFDrf.GetTextSubstringData - Class in nxopen.uf
-
- UFDrf.GetXhatchParmsData - Class in nxopen.uf
-
- UFDrf.HatchFillPreferences - Class in nxopen.uf
-
- UFDrf.IdSymbolInfo - Class in nxopen.uf
-
- UFDrf.IdSymbolType - Class in nxopen.uf
-
- UFDrf.ImageData - Class in nxopen.uf
-
- UFDrf.InheritType - Class in nxopen.uf
-
- UFDrf.InspectionType - Class in nxopen.uf
-
- UFDrf.IntermediatePoints - Class in nxopen.uf
-
- UFDrf.LabelInfo - Class in nxopen.uf
-
- UFDrf.Leader - Class in nxopen.uf
-
- UFDrf.LeaderAttachType - Class in nxopen.uf
-
- UFDrf.LeaderData - Class in nxopen.uf
-
- UFDrf.LeaderInfo - Class in nxopen.uf
-
- UFDrf.LeaderMode - Class in nxopen.uf
-
- UFDrf.LeaderOrientation - Class in nxopen.uf
-
- UFDrf.LeaderSide - Class in nxopen.uf
-
- UFDrf.LeaderType - Class in nxopen.uf
-
- UFDrf.Lettering - Class in nxopen.uf
-
- UFDrf.LetteringPreferences - Class in nxopen.uf
-
- UFDrf.LineArrowPreferences - Class in nxopen.uf
-
- UFDrf.LinearUnits - Class in nxopen.uf
-
- UFDrf.LineObject - Class in nxopen.uf
-
- UFDrf.LineWidth - Class in nxopen.uf
-
- UFDrf.NarrowDimensionDisplayType - Class in nxopen.uf
-
- UFDrf.NarrowDimensionInfo - Class in nxopen.uf
-
- UFDrf.NarrowDimensionTextOrientation - Class in nxopen.uf
-
- UFDrf.Object - Class in nxopen.uf
-
- UFDrf.ObjectAssocData - Class in nxopen.uf
-
- UFDrf.ObjectAssocLineType - Class in nxopen.uf
-
- UFDrf.ObjectAssocPointType - Class in nxopen.uf
-
- UFDrf.OrdarrowLineType - Class in nxopen.uf
-
- UFDrf.OrddispInfo - Class in nxopen.uf
-
- UFDrf.OrdoriginDisplayType - Class in nxopen.uf
-
- UFDrf.QuadrantType - Class in nxopen.uf
-
- UFDrf.RadiusSymbol - Class in nxopen.uf
-
- UFDrf.ReferenceSymbolType - Class in nxopen.uf
-
- UFDrf.RetainedState - Class in nxopen.uf
-
- UFDrf.StackAlignPosition - Class in nxopen.uf
-
- UFDrf.StrokeInfo - Class in nxopen.uf
-
- UFDrf.SymbolConnection - Class in nxopen.uf
-
- UFDrf.SymbolConnectionType - Class in nxopen.uf
-
- UFDrf.SymbolCreateData - Class in nxopen.uf
-
- UFDrf.SymbolData - Class in nxopen.uf
-
- UFDrf.SymbolInstance - Class in nxopen.uf
-
- UFDrf.SymbolPreferences - Class in nxopen.uf
-
- UFDrf.Text - Class in nxopen.uf
-
- UFDrf.TextAboveLeader - Class in nxopen.uf
-
- UFDrf.TextArrowPlacement - Class in nxopen.uf
-
- UFDrf.TextCfw - Class in nxopen.uf
-
- UFDrf.TextJust - Class in nxopen.uf
-
- UFDrf.TextType - Class in nxopen.uf
-
- UFDrf.TolerancePlacement - Class in nxopen.uf
-
- UFDrf.ToleranceType - Class in nxopen.uf
-
- UFDrf.TrimDimLineStyle - Class in nxopen.uf
-
- UFDrf.UdsSize - Class in nxopen.uf
-
- UFDrf.UdsSizeType - Class in nxopen.uf
-
- UFDrf.UdSymbolFontInfo - Class in nxopen.uf
-
- UFDrf.UdSymbolPenType - Class in nxopen.uf
-
- UFDrf.UnitsFormatPreferences - Class in nxopen.uf
-
- UFDrf.ValidClineForm - Class in nxopen.uf
-
- UFDrf.ValidMaterial - Class in nxopen.uf
-
- UFDrf.VerticalTextJust - Class in nxopen.uf
-
- UFDrf.ViewLabelTextToStubFormat - Class in nxopen.uf
-
- UFDrf.WeldContourTypes - Class in nxopen.uf
-
- UFDrf.WeldFinishTypes - Class in nxopen.uf
-
- UFDrf.WeldIdentLineType - Class in nxopen.uf
-
- UFDrf.WeldSizeCode - Class in nxopen.uf
-
- UFDrf.WeldSymbols - Class in nxopen.uf
-
- UFDrf.WeldSymbolTypes - Class in nxopen.uf
-
- UFDrf.WeldSymExtType - Class in nxopen.uf
-
- UFDrf.WeldSymInfo - Class in nxopen.uf
-
- UFDrpos - Interface in nxopen.uf
-
Contains wrappers for all 'UFDrpos' functions and data types.
- UFDrpos.FeedUnit - Class in nxopen.uf
-
- UFDrpos.FeedUse - Class in nxopen.uf
-
- UFDrpos.Type - Class in nxopen.uf
-
- UFDrpos.ZigZagDir - Class in nxopen.uf
-
- UFEval - Interface in nxopen.uf
-
Contains wrappers for all 'UFEval' functions and data types.
- UFEval.Arc - Class in nxopen.uf
-
- UFEval.AskSplineControlPtsData - Class in nxopen.uf
-
- UFEval.AskSplineKnotsData - Class in nxopen.uf
-
- UFEval.Ellipse - Class in nxopen.uf
-
- UFEval.EvaluateClosestPointData - Class in nxopen.uf
-
- UFEval.EvaluateData - Class in nxopen.uf
-
- UFEval.EvaluateUnitVectorsData - Class in nxopen.uf
-
- UFEval.Hyperbola - Class in nxopen.uf
-
- UFEval.Line - Class in nxopen.uf
-
- UFEval.Parabola - Class in nxopen.uf
-
- UFEval.Spline - Class in nxopen.uf
-
- UFEvalsf - Interface in nxopen.uf
-
Contains wrappers for all 'UFEvalsf' functions and data types.
- UFEvalsf.Pos3 - Class in nxopen.uf
-
- UFFacet - Interface in nxopen.uf
-
Contains wrappers for all 'UFFacet' functions and data types.
- UFFacet.AskAdjacentFacetData - Class in nxopen.uf
-
- UFFacet.AskModelsOfSolidData - Class in nxopen.uf
-
- UFFacet.AskNormalsOfFacetData - Class in nxopen.uf
-
- UFFacet.AskParamsOfFacetData - Class in nxopen.uf
-
- UFFacet.AskPlaneEquationData - Class in nxopen.uf
-
- UFFacet.AskSurfaceDataForFaceData - Class in nxopen.uf
-
- UFFacet.AskVerticesOfFacetData - Class in nxopen.uf
-
- UFFacet.FindEdgeInFacetData - Class in nxopen.uf
-
- UFFacet.Parameters - Class in nxopen.uf
-
- UFFam - Interface in nxopen.uf
-
Contains wrappers for all 'UFFam' functions and data types.
- UFFam.AskInstanceData - Class in nxopen.uf
-
- UFFam.AttributeData - Class in nxopen.uf
-
- UFFam.ClassData - Class in nxopen.uf
-
- UFFam.EvaluateIntentData - Class in nxopen.uf
-
- UFFam.FamilyData - Class in nxopen.uf
-
- UFFam.IntentData - Class in nxopen.uf
-
- UFFam.MemberData - Class in nxopen.uf
-
- UFFbmGeom - Interface in nxopen.uf
-
Contains wrappers for all 'UFFbmGeom' functions and data types.
- UFFbmGeom.AskAccessibilityVectorsData - Class in nxopen.uf
-
- UFFbmGeom.AskAvailableCriteriaData - Class in nxopen.uf
-
- UFFbmGeom.AskFeatureEntitiesData - Class in nxopen.uf
-
- UFFbmGeom.AskFeaturesData - Class in nxopen.uf
-
- UFFbmGeom.AskListOfFeatureNamesData - Class in nxopen.uf
-
- UFFbmGeom.AskRepresentativeFeaturesData - Class in nxopen.uf
-
- UFFbmGeom.AskUsedCriteriaData - Class in nxopen.uf
-
- UFFbmGeom.ClassifyByCriteriaData - Class in nxopen.uf
-
- UFFbmGeom.CritValueType - Class in nxopen.uf
-
- UFFltr - Interface in nxopen.uf
-
Contains wrappers for all 'UFFltr' functions and data types.
- UFFltr.AskBoxOfAssyData - Class in nxopen.uf
-
- UFFltr.AskBoxZoneData - Class in nxopen.uf
-
- UFFltr.AskFilterData - Class in nxopen.uf
-
- UFFltr.AskPlaneZoneData - Class in nxopen.uf
-
- UFFltr.AutoCreateBoxZonesData - Class in nxopen.uf
-
- UFFltr.AutoCreatePlaneZonesData - Class in nxopen.uf
-
- UFForgeo - Interface in nxopen.uf
-
Contains wrappers for all 'UFForgeo' functions and data types.
- UFGdt - Interface in nxopen.uf
-
Contains wrappers for all 'UFGdt' functions and data types.
- UFGdt.AnnotationTags - Class in nxopen.uf
-
- UFGdt.AskAppendedTextData - Class in nxopen.uf
-
- UFGdt.AskAssociatedDatumsData - Class in nxopen.uf
-
- UFGdt.AskCalloutStringsData - Class in nxopen.uf
-
- UFGdt.AskComplexSubFeaturesData - Class in nxopen.uf
-
- UFGdt.AskDatumKeywordsData - Class in nxopen.uf
-
- UFGdt.AskDatumReferencersData - Class in nxopen.uf
-
- UFGdt.AskDatumsOfFeatureData - Class in nxopen.uf
-
- UFGdt.AskFacesData - Class in nxopen.uf
-
- UFGdt.AskFcfTagsData - Class in nxopen.uf
-
- UFGdt.AskFeaturesOfFaceData - Class in nxopen.uf
-
- UFGdt.AskLinkedFeaturesData - Class in nxopen.uf
-
- UFGdt.AskModlFeaturesData - Class in nxopen.uf
-
- UFGdt.AskProductAttributesData - Class in nxopen.uf
-
- UFGdt.AskProfileTolData - Class in nxopen.uf
-
- UFGdt.AskSubFeaturesData - Class in nxopen.uf
-
- UFGdt.AskTagsData - Class in nxopen.uf
-
- UFGdt.AskTargetAreaXhatchData - Class in nxopen.uf
-
- UFGdt.AskTargetsOfDatumData - Class in nxopen.uf
-
- UFGdt.AskToleranceFromIndexData - Class in nxopen.uf
-
- UFGdt.AskTolerancesData - Class in nxopen.uf
-
- UFGdt.AskToleranceTypesData - Class in nxopen.uf
-
- UFGdt.AskTolFeatInstanceData - Class in nxopen.uf
-
- UFGdt.AskUnitBasisData - Class in nxopen.uf
-
- UFGdt.CalloutString - Class in nxopen.uf
-
- UFGdt.Characteristic - Class in nxopen.uf
-
- UFGdt.DatumAssocType - Class in nxopen.uf
-
- UFGdt.DatumIdentifier - Class in nxopen.uf
-
- UFGdt.DatumReference - Class in nxopen.uf
-
- UFGdt.DatumTargetLine - Class in nxopen.uf
-
- UFGdt.DatumTargetPoint - Class in nxopen.uf
-
- UFGdt.DepthTolerance - Class in nxopen.uf
-
- UFGdt.Description - Class in nxopen.uf
-
- UFGdt.DirectedDimensionType - Class in nxopen.uf
-
- UFGdt.DrfData - Class in nxopen.uf
-
- UFGdt.DrfReference - Class in nxopen.uf
-
- UFGdt.EdgeSelectType - Class in nxopen.uf
-
- UFGdt.FeatureType - Class in nxopen.uf
-
- UFGdt.GeometricDefinition - Class in nxopen.uf
-
- UFGdt.GeometricDefinitionType - Class in nxopen.uf
-
- UFGdt.IndexDisplayType - Class in nxopen.uf
-
- UFGdt.Keyword - Class in nxopen.uf
-
- UFGdt.LeaderSpec - Class in nxopen.uf
-
- UFGdt.LeaderType - Class in nxopen.uf
-
- UFGdt.LimitsAndFitsData - Class in nxopen.uf
-
- UFGdt.LimitsAndFitsDisplayType - Class in nxopen.uf
-
- UFGdt.MaterialModifier - Class in nxopen.uf
-
- UFGdt.ModifierTypes - Class in nxopen.uf
-
- UFGdt.ModlData - Class in nxopen.uf
-
- UFGdt.ModlParameter - Class in nxopen.uf
-
- UFGdt.MultipleDatum - Class in nxopen.uf
-
- UFGdt.PatternType - Class in nxopen.uf
-
- UFGdt.Point - Class in nxopen.uf
-
- UFGdt.Precedence - Class in nxopen.uf
-
- UFGdt.ProductAttribute - Class in nxopen.uf
-
- UFGdt.ProfileType - Class in nxopen.uf
-
- UFGdt.ProjZone - Class in nxopen.uf
-
- UFGdt.RelationType - Class in nxopen.uf
-
- UFGdt.SizeValueType - Class in nxopen.uf
-
- UFGdt.Standard - Class in nxopen.uf
-
- UFGdt.StubDirection - Class in nxopen.uf
-
- UFGdt.SurfaceParms - Class in nxopen.uf
-
- UFGdt.TargetCylArea - Class in nxopen.uf
-
- UFGdt.TargetDiaArea - Class in nxopen.uf
-
- UFGdt.TargetNonPlanarData - Class in nxopen.uf
-
- UFGdt.TargetRectArea - Class in nxopen.uf
-
- UFGdt.TargetUdefArea - Class in nxopen.uf
-
- UFGdt.TextLocation - Class in nxopen.uf
-
- UFGdt.ThreadData - Class in nxopen.uf
-
- UFGdt.ToleranceType - Class in nxopen.uf
-
- UFGdt.ToleranceValue - Class in nxopen.uf
-
- UFGdt.ToleranceZone - Class in nxopen.uf
-
- UFGdt.TolFormat - Class in nxopen.uf
-
- UFGdt.UnitBasis - Class in nxopen.uf
-
- UFGdt.ZoneShape - Class in nxopen.uf
-
- UFGexp - Interface in nxopen.uf
-
Contains wrappers for all 'UFGexp' functions and data types.
- UFGexp.AskAngleParmsData - Class in nxopen.uf
-
- UFGexp.AskDistanceParmsData - Class in nxopen.uf
-
- UFGexp.AskLengthParmsData - Class in nxopen.uf
-
- UFGexp.CreateAngleData - Class in nxopen.uf
-
- UFGexp.CreateDistanceData - Class in nxopen.uf
-
- UFGexp.CreateLengthData - Class in nxopen.uf
-
- UFGexp.Qualifier - Class in nxopen.uf
-
- UFHelp - Interface in nxopen.uf
-
Contains wrappers for all 'UFHelp' functions and data types.
- UFHmop - Interface in nxopen.uf
-
Contains wrappers for all 'UFHmop' functions and data types.
- UFKf - Interface in nxopen.uf
-
Contains wrappers for all 'UFKf' functions and data types.
- UFKf.AskAllClassesData - Class in nxopen.uf
-
- UFKf.AskAncestorClassesData - Class in nxopen.uf
-
- UFKf.AskClassesData - Class in nxopen.uf
-
- UFKf.AskParametersData - Class in nxopen.uf
-
- UFKf.AskRulesData - Class in nxopen.uf
-
- UFKf.AskRulesOfClassData - Class in nxopen.uf
-
- UFKf.AskRuleTypesData - Class in nxopen.uf
-
- UFKf.AskValueOfListItemData - Class in nxopen.uf
-
- UFKf.ClassType - Class in nxopen.uf
-
- UFKf.ListPopData - Class in nxopen.uf
-
- UFKf.Type - Class in nxopen.uf
-
- UFKfUgmgr - Interface in nxopen.uf
-
Contains wrappers for all 'UFKfUgmgr' functions and data types.
- UFKfUgmgr.AskUserDfaClassesData - Class in nxopen.uf
-
- UFKfUgmgr.AskUserDfaFuncsData - Class in nxopen.uf
-
- UFKfUgmgr.ListUserClassesReferencedData - Class in nxopen.uf
-
- UFKfUgmgr.ListUserFuncsReferencedData - Class in nxopen.uf
-
- UFLayer - Interface in nxopen.uf
-
Contains wrappers for all 'UFLayer' functions and data types.
- UFLayer.CategoryInfo - Class in nxopen.uf
-
- UFLayer.StatusInfo - Class in nxopen.uf
-
- UFLib - Interface in nxopen.uf
-
Contains wrappers for all 'UFLib' functions and data types.
- UFLib.AskRecordInRsetData - Class in nxopen.uf
-
- UFLib.AskRsetMapData - Class in nxopen.uf
-
- UFLib.ExecuteQueryData - Class in nxopen.uf
-
- UFLib.NcmctSetupReplaceMode - Class in nxopen.uf
-
- UFMb - Interface in nxopen.uf
-
Contains wrappers for all 'UFMb' functions and data types.
- UFMb.State - Class in nxopen.uf
-
- UFMct - Interface in nxopen.uf
-
Contains wrappers for all 'UFMct' functions and data types.
- UFMfm - Interface in nxopen.uf
-
Contains wrappers for all 'UFMfm' functions and data types.
- UFMfm.AskAttributesData - Class in nxopen.uf
-
- UFMfm.AskCandidateMachiningFeatureTypesData - Class in nxopen.uf
-
- UFMfm.AskDoubleValueOfAttributeData - Class in nxopen.uf
-
- UFMfm.AskGeometryGroupsData - Class in nxopen.uf
-
- UFMfm.AskIntegerValueOfAttributeData - Class in nxopen.uf
-
- UFMfm.AskListOfFacesData - Class in nxopen.uf
-
- UFMfm.AskLogicalValueOfAttributeData - Class in nxopen.uf
-
- UFMfm.AskMachiningFeaturesOfPartData - Class in nxopen.uf
-
- UFMfm.AskMachiningFeaturesOfTypeData - Class in nxopen.uf
-
- UFMfm.AskMachiningFeatureTypesData - Class in nxopen.uf
-
- UFMfm.AskSelectedFeaListData - Class in nxopen.uf
-
- UFMfm.AskStringValueOfAttributeData - Class in nxopen.uf
-
- UFMfm.AttrValueType - Class in nxopen.uf
-
- UFMfm.CreateMachiningFeaturesFromModelingFeaturesData - Class in nxopen.uf
-
- UFMfm.CreateMachiningFeaturesFromRecognizedFeaturesData - Class in nxopen.uf
-
- UFMfm.CreateMachiningFeaturesFromTaggedArcsData - Class in nxopen.uf
-
- UFMfm.CreateMachiningFeaturesFromTaggedEdgesData - Class in nxopen.uf
-
- UFMfm.CreateMachiningFeaturesFromTaggedFacesData - Class in nxopen.uf
-
- UFMfm.CreateMachiningFeaturesFromTaggedPointsData - Class in nxopen.uf
-
- UFMfm.CreateMachiningFeaturesFromUserDefinedFeaturesData - Class in nxopen.uf
-
- UFMfm.MachinedStatus - Class in nxopen.uf
-
- UFMfm.RecognizeHolesData - Class in nxopen.uf
-
- UFMfm.RecognizeOptions - Class in nxopen.uf
-
- UFMfm.SourceType - Class in nxopen.uf
-
- UFMisc - Interface in nxopen.uf
-
Contains wrappers for all 'UFMisc' functions and data types.
- UFModeling - Interface in nxopen.uf
-
Contains wrappers for all 'UFModeling' functions and data types.
- UFModeling.AskAllMembersOfSetData - Class in nxopen.uf
-
- UFModeling.AskAngleEdgeData - Class in nxopen.uf
-
- UFModeling.AskBodyBoundariesData - Class in nxopen.uf
-
- UFModeling.AskBodyConsistencyData - Class in nxopen.uf
-
- UFModeling.AskBodyStructuresData - Class in nxopen.uf
-
- UFModeling.AskBooleanWithRetainedOptionsData - Class in nxopen.uf
-
- UFModeling.AskChamferParmsData - Class in nxopen.uf
-
- UFModeling.AskCnncEdgesData - Class in nxopen.uf
-
- UFModeling.AskDatumPlaneData - Class in nxopen.uf
-
- UFModeling.AskEdgeVertsData - Class in nxopen.uf
-
- UFModeling.AskExtremeData - Class in nxopen.uf
-
- UFModeling.AskFaceData - Class in nxopen.uf
-
- UFModeling.AskFaceFaceIntersectData - Class in nxopen.uf
-
- UFModeling.AskFaceGridCountData - Class in nxopen.uf
-
- UFModeling.AskFaceMinRadiiData - Class in nxopen.uf
-
- UFModeling.AskFacepairParmsData - Class in nxopen.uf
-
- UFModeling.AskFaceParmData - Class in nxopen.uf
-
- UFModeling.AskFacePeriodicityData - Class in nxopen.uf
-
- UFModeling.AskFacePropsData - Class in nxopen.uf
-
- UFModeling.AskFaceSelfIntersectData - Class in nxopen.uf
-
- UFModeling.AskFeatDirectionData - Class in nxopen.uf
-
- UFModeling.AskFeatErrorData - Class in nxopen.uf
-
- UFModeling.AskFeatObjectData - Class in nxopen.uf
-
- UFModeling.AskFeatRelativesData - Class in nxopen.uf
-
- UFModeling.AskFeatToleranceData - Class in nxopen.uf
-
- UFModeling.AskFeaturesOfMirrorSetData - Class in nxopen.uf
-
- UFModeling.AskFeatWarningMessagesData - Class in nxopen.uf
-
- UFModeling.AskHorzDimeData - Class in nxopen.uf
-
- UFModeling.AskInstancesOfFeatureData - Class in nxopen.uf
-
- UFModeling.AskLinkFacesData - Class in nxopen.uf
-
- UFModeling.AskMassProps3dData - Class in nxopen.uf
-
- UFModeling.AskMaxCurvatureData - Class in nxopen.uf
-
- UFModeling.AskMergedFacesData - Class in nxopen.uf
-
- UFModeling.AskMinimumDist2Data - Class in nxopen.uf
-
- UFModeling.AskMinimumDist3Data - Class in nxopen.uf
-
- UFModeling.AskMinimumDistData - Class in nxopen.uf
-
- UFModeling.AskObjDimensionalityData - Class in nxopen.uf
-
- UFModeling.AskOutOfDateFeaturesData - Class in nxopen.uf
-
- UFModeling.AskParaDistData - Class in nxopen.uf
-
- UFModeling.AskParaEdgeData - Class in nxopen.uf
-
- UFModeling.AskPatchBodyParmsData - Class in nxopen.uf
-
- UFModeling.AskPerpDistData - Class in nxopen.uf
-
- UFModeling.AskPlaneData - Class in nxopen.uf
-
- UFModeling.AskPointsParmsData - Class in nxopen.uf
-
- UFModeling.AskReferencesOfFeaturesData - Class in nxopen.uf
-
- UFModeling.AskScaleData - Class in nxopen.uf
-
- UFModeling.AskSetsOfMemberData - Class in nxopen.uf
-
- UFModeling.AskSewSheetBodyData - Class in nxopen.uf
-
- UFModeling.AskSewSolidBodyData - Class in nxopen.uf
-
- UFModeling.AskSplitEdgesData - Class in nxopen.uf
-
- UFModeling.AskSplitFacesData - Class in nxopen.uf
-
- UFModeling.AskSubdivFaceParmsData - Class in nxopen.uf
-
- UFModeling.AskThruFacesData - Class in nxopen.uf
-
- UFModeling.AskUpdateUndoFeatData - Class in nxopen.uf
-
- UFModeling.AskVectorAngleData - Class in nxopen.uf
-
- UFModeling.AskVertDimeData - Class in nxopen.uf
-
- UFModeling.CreateMultipleSewsData - Class in nxopen.uf
-
- UFModeling.CreateSewData - Class in nxopen.uf
-
- UFModeling.DevchkAdjacentEdgesData - Class in nxopen.uf
-
- UFModeling.IntersectBodiesData - Class in nxopen.uf
-
- UFModeling.IntersectCurveToCurveData - Class in nxopen.uf
-
- UFModeling.IntersectCurveToFaceData - Class in nxopen.uf
-
- UFModeling.IntersectCurveToPlaneData - Class in nxopen.uf
-
- UFModeling.ReplaceFeaturesData - Class in nxopen.uf
-
- UFModeling.SplitBodyData - Class in nxopen.uf
-
- UFModeling.SplitBodyRetainToolData - Class in nxopen.uf
-
- UFModeling.SubtractBodiesData - Class in nxopen.uf
-
- UFModeling.TraceARayData - Class in nxopen.uf
-
- UFModeling.TrimSheetData - Class in nxopen.uf
-
- UFModl - Interface in nxopen.uf
-
Contains wrappers for all 'UFModl' functions and data types.
- UFModl.AskBallSlotParmsData - Class in nxopen.uf
-
- UFModl.AskDovetailSlotParmsData - Class in nxopen.uf
-
- UFModl.AskEntityParentsData - Class in nxopen.uf
-
- UFModl.AskExtrudeOffsetDirData - Class in nxopen.uf
-
- UFModl.AskExtrusionData - Class in nxopen.uf
-
- UFModl.AskLinkedExteriorData - Class in nxopen.uf
-
- UFModl.AskRectSlotParmsData - Class in nxopen.uf
-
- UFModl.AskRevolutionData - Class in nxopen.uf
-
- UFModl.AskSweepCurvesData - Class in nxopen.uf
-
- UFModl.AskSweepDirectionData - Class in nxopen.uf
-
- UFModl.AskSweepParmsData - Class in nxopen.uf
-
- UFModl.AskThickenSheetParmsData - Class in nxopen.uf
-
- UFModl.AskTSlotParmsData - Class in nxopen.uf
-
- UFModl.AskUSlotParmsData - Class in nxopen.uf
-
- UFModl.BeadAngleRelative - Class in nxopen.uf
-
- UFModl.BeadAttach - Class in nxopen.uf
-
- UFModl.BeadEnds - Class in nxopen.uf
-
- UFModl.BeadHollow - Class in nxopen.uf
-
- UFModl.BeadPlaneNormal - Class in nxopen.uf
-
- UFModl.BeadShape - Class in nxopen.uf
-
- UFModl.BeadWidthRelative - Class in nxopen.uf
-
- UFModl.BendOperationData - Class in nxopen.uf
-
- UFModl.BendOperationE - Class in nxopen.uf
-
- UFModl.BlendEdge - Class in nxopen.uf
-
- UFModl.BlendFacesLimitData - Class in nxopen.uf
-
- UFModl.BlendPoint - Class in nxopen.uf
-
- UFModl.BlendPointData - Class in nxopen.uf
-
- UFModl.BlendRadiusTypes - Class in nxopen.uf
-
- UFModl.BooleanBody - Class in nxopen.uf
-
- UFModl.Bsurface - Class in nxopen.uf
-
- UFModl.BsurfRowInfo - Class in nxopen.uf
-
- UFModl.CompareAccuracy - Class in nxopen.uf
-
- UFModl.CompareChangeduniquefaceRule - Class in nxopen.uf
-
- UFModl.CompareEntityInfo - Class in nxopen.uf
-
- UFModl.CompareEntityMatch - Class in nxopen.uf
-
- UFModl.CompareEntityType - Class in nxopen.uf
-
- UFModl.CompareIdenticalfaceRule - Class in nxopen.uf
-
- UFModl.CompareOptions - Class in nxopen.uf
-
- UFModl.ComparePartEntitiesData - Class in nxopen.uf
-
- UFModl.ComparePartEntitiesData3 - Class in nxopen.uf
-
- UFModl.ComparePartMapData - Class in nxopen.uf
-
- UFModl.ComparePartMapData3 - Class in nxopen.uf
-
- UFModl.CreateExtrudeTrimOpts1Data - Class in nxopen.uf
-
- UFModl.CreateExtrudeTrimOptsData - Class in nxopen.uf
-
- UFModl.CreateExtrusion1Data - Class in nxopen.uf
-
- UFModl.CreateExtrusion2Data - Class in nxopen.uf
-
- UFModl.CreateExtrusionData - Class in nxopen.uf
-
- UFModl.CreateExtrusionDefault1Data - Class in nxopen.uf
-
- UFModl.CreateExtrusionDefaultData - Class in nxopen.uf
-
- UFModl.CreateExtrusionDirData - Class in nxopen.uf
-
- UFModl.CreateExtrusionPath1Data - Class in nxopen.uf
-
- UFModl.CreateExtrusionPathData - Class in nxopen.uf
-
- UFModl.CreateRevolution1Data - Class in nxopen.uf
-
- UFModl.CreateRevolutionData - Class in nxopen.uf
-
- UFModl.CreateRevolutionDirData - Class in nxopen.uf
-
- UFModl.CreateTrimmedTube1Data - Class in nxopen.uf
-
- UFModl.CreateTrimmedTubeData - Class in nxopen.uf
-
- UFModl.CurveFitData - Class in nxopen.uf
-
- UFModl.DensityUnits - Class in nxopen.uf
-
- UFModl.DevchkEeInfo - Class in nxopen.uf
-
- UFModl.DfoConstraint - Class in nxopen.uf
-
- UFModl.DfoConstraintType - Class in nxopen.uf
-
- UFModl.DfoRegion - Class in nxopen.uf
-
- UFModl.DfoScaleType - Class in nxopen.uf
-
- UFModl.DimensionData - Class in nxopen.uf
-
- UFModl.EdgeBlendData - Class in nxopen.uf
-
- UFModl.EdgeBlendMultData - Class in nxopen.uf
-
- UFModl.EdgeBlendSet - Class in nxopen.uf
-
- UFModl.EdgeBlendSetbackData - Class in nxopen.uf
-
- UFModl.EdgeBlendStopshortData - Class in nxopen.uf
-
- UFModl.FaceExtension - Class in nxopen.uf
-
- UFModl.Faces - Class in nxopen.uf
-
- UFModl.Features - Class in nxopen.uf
-
- UFModl.FeatureSigns - Class in nxopen.uf
-
- UFModl.FlangeData - Class in nxopen.uf
-
- UFModl.Gflange - Class in nxopen.uf
-
- UFModl.GflangeDistort - Class in nxopen.uf
-
- UFModl.GflangeOptionsData - Class in nxopen.uf
-
- UFModl.HoleType - Class in nxopen.uf
-
- UFModl.IdentifyExteriorUsingHlData - Class in nxopen.uf
-
- UFModl.IdentifyExteriorUsingRaysData - Class in nxopen.uf
-
- UFModl.ImportBodyFeatureEditOption - Class in nxopen.uf
-
- UFModl.ImprintFacesData - Class in nxopen.uf
-
- UFModl.ImprintLoopData - Class in nxopen.uf
-
- UFModl.InsetFlangeData - Class in nxopen.uf
-
- UFModl.IntersectType - Class in nxopen.uf
-
- UFModl.LawextDirref - Class in nxopen.uf
-
- UFModl.LinkedExt - Class in nxopen.uf
-
- UFModl.MatchedgeData - Class in nxopen.uf
-
- UFModl.MethodList - Class in nxopen.uf
-
- UFModl.OffsetTransType - Class in nxopen.uf
-
- UFModl.ParentDispInfo - Class in nxopen.uf
-
- UFModl.ParmMethod - Class in nxopen.uf
-
- UFModl.PocketpadType - Class in nxopen.uf
-
- UFModl.ProjType - Class in nxopen.uf
-
- UFModl.PunchType - Class in nxopen.uf
-
- UFModl.QuiltType - Class in nxopen.uf
-
- UFModl.RayHitPointInfo - Class in nxopen.uf
-
- UFModl.ReblendFace - Class in nxopen.uf
-
- UFModl.ReblendFaceData - Class in nxopen.uf
-
- UFModl.RefitFaceContinuity - Class in nxopen.uf
-
- UFModl.RefitFaceData - Class in nxopen.uf
-
- UFModl.RefitFaceFitDirection - Class in nxopen.uf
-
- UFModl.RefitFaceTargetData - Class in nxopen.uf
-
- UFModl.ReplaceFeatures - Class in nxopen.uf
-
- UFModl.RipedgeData - Class in nxopen.uf
-
- UFModl.RoughOffset - Class in nxopen.uf
-
- UFModl.RsoSurfCtrlOption - Class in nxopen.uf
-
- UFModl.RsoSurfMethod - Class in nxopen.uf
-
- UFModl.RsoTrimOption - Class in nxopen.uf
-
- UFModl.ScaleType - Class in nxopen.uf
-
- UFModl.SecsrfCreMethod - Class in nxopen.uf
-
- UFModl.SecsrfParamMethod - Class in nxopen.uf
-
- UFModl.SflangeContinuity - Class in nxopen.uf
-
- UFModl.SflangeDir - Class in nxopen.uf
-
- UFModl.SflangeTrim - Class in nxopen.uf
-
- UFModl.SflangeType - Class in nxopen.uf
-
- UFModl.ShapePatternClientDialogData - Class in nxopen.uf
-
- UFModl.SimplData - Class in nxopen.uf
-
- UFModl.SlotType - Class in nxopen.uf
-
- UFModl.SmbendAngle - Class in nxopen.uf
-
- UFModl.SmbendCornerData - Class in nxopen.uf
-
- UFModl.SmbendCurve - Class in nxopen.uf
-
- UFModl.SmbendCylinderData - Class in nxopen.uf
-
- UFModl.SmbendData - Class in nxopen.uf
-
- UFModl.SmbendDirection - Class in nxopen.uf
-
- UFModl.SmbendRadius - Class in nxopen.uf
-
- UFModl.SmbendStatSide - Class in nxopen.uf
-
- UFModl.SmcornerData - Class in nxopen.uf
-
- UFModl.SmcutoutData - Class in nxopen.uf
-
- UFModl.SmcutoutType - Class in nxopen.uf
-
- UFModl.SmholeData - Class in nxopen.uf
-
- UFModl.SmholeDirectionType - Class in nxopen.uf
-
- UFModl.SmholeType - Class in nxopen.uf
-
- UFModl.SmjoggleData - Class in nxopen.uf
-
- UFModl.SmpunchCutSets - Class in nxopen.uf
-
- UFModl.SmpunchData - Class in nxopen.uf
-
- UFModl.SmpunchTopType - Class in nxopen.uf
-
- UFModl.SmreliefData - Class in nxopen.uf
-
- UFModl.SmslotData - Class in nxopen.uf
-
- UFModl.SmslotType - Class in nxopen.uf
-
- UFModl.SnipsrfFeatureData - Class in nxopen.uf
-
- UFModl.SnipsurfBoundaryType - Class in nxopen.uf
-
- UFModl.SnipsurfRefitMethod - Class in nxopen.uf
-
- UFModl.SolidPunchData - Class in nxopen.uf
-
- UFModl.Srfvalue - Class in nxopen.uf
-
- UFModl.State - Class in nxopen.uf
-
- UFModl.StateInfo - Class in nxopen.uf
-
- UFModl.StringList - Class in nxopen.uf
-
- UFModl.StycornerCrvOpt - Class in nxopen.uf
-
- UFModl.StycornerData - Class in nxopen.uf
-
- UFModl.SweepTrimObject - Class in nxopen.uf
-
- UFModl.SweepTrimOpts - Class in nxopen.uf
-
- UFModl.SweepTrimSigns - Class in nxopen.uf
-
- UFModl.SymbThreadData - Class in nxopen.uf
-
- UFModl.TransformType - Class in nxopen.uf
-
- UFModl.TrimBlendOptions - Class in nxopen.uf
-
- UFModl.TrimObject - Class in nxopen.uf
-
- UFModl.UdfExpData - Class in nxopen.uf
-
- UFModl.UdfReverseDir - Class in nxopen.uf
-
- UFModl.UdfsDefData - Class in nxopen.uf
-
- UFModl.UdfsExp - Class in nxopen.uf
-
- UFModl.Units - Class in nxopen.uf
-
- UFModl.UpdateOption - Class in nxopen.uf
-
- UFModl.VectorType - Class in nxopen.uf
-
- UFModl.WrapAssem - Class in nxopen.uf
-
- UFModl.WrapGeom - Class in nxopen.uf
-
- UFModlFeatures - Interface in nxopen.uf
-
Contains wrappers for all 'UFModlFeatures' functions and data types.
- UFModlFeatures.AskBallGrooveParmsData - Class in nxopen.uf
-
- UFModlFeatures.AskBossParmsData - Class in nxopen.uf
-
- UFModlFeatures.AskBplaneData - Class in nxopen.uf
-
- UFModlFeatures.AskCBoreHoleParmsData - Class in nxopen.uf
-
- UFModlFeatures.AskCircularPatternFaceData - Class in nxopen.uf
-
- UFModlFeatures.AskConeParmsData - Class in nxopen.uf
-
- UFModlFeatures.AskCSunkHoleParmsData - Class in nxopen.uf
-
- UFModlFeatures.AskCurveMesh1Data - Class in nxopen.uf
-
- UFModlFeatures.AskCurveMeshData - Class in nxopen.uf
-
- UFModlFeatures.AskCylinderParmsData - Class in nxopen.uf
-
- UFModlFeatures.AskCylPocketParmsData - Class in nxopen.uf
-
- UFModlFeatures.AskDatumAxisParmsData - Class in nxopen.uf
-
- UFModlFeatures.AskDatumCsysComponentsData - Class in nxopen.uf
-
- UFModlFeatures.AskDatumPlaneParmsData - Class in nxopen.uf
-
- UFModlFeatures.AskDatumPointAndDirectionData - Class in nxopen.uf
-
- UFModlFeatures.AskEnlargeData - Class in nxopen.uf
-
- UFModlFeatures.AskFaceBlendLawRadiiData - Class in nxopen.uf
-
- UFModlFeatures.AskFaceBlendLawRange1RadiiData - Class in nxopen.uf
-
- UFModlFeatures.AskFaceBlendLawRange2RadiiData - Class in nxopen.uf
-
- UFModlFeatures.AskFaceConstraintData - Class in nxopen.uf
-
- UFModlFeatures.AskHollowData - Class in nxopen.uf
-
- UFModlFeatures.AskImprEdgesData - Class in nxopen.uf
-
- UFModlFeatures.AskLocalScaleData - Class in nxopen.uf
-
- UFModlFeatures.AskMirrorPatternFaceData - Class in nxopen.uf
-
- UFModlFeatures.AskMoveRegionData - Class in nxopen.uf
-
- UFModlFeatures.AskOffsetRegionData - Class in nxopen.uf
-
- UFModlFeatures.AskRectangularPatternFaceData - Class in nxopen.uf
-
- UFModlFeatures.AskRectGrooveParmsData - Class in nxopen.uf
-
- UFModlFeatures.AskRectPadParms1Data - Class in nxopen.uf
-
- UFModlFeatures.AskRectPadParmsData - Class in nxopen.uf
-
- UFModlFeatures.AskRectPocketParmsData - Class in nxopen.uf
-
- UFModlFeatures.AskReplaceFaceData - Class in nxopen.uf
-
- UFModlFeatures.AskResizeFaceData - Class in nxopen.uf
-
- UFModlFeatures.AskRuled1Data - Class in nxopen.uf
-
- UFModlFeatures.AskRuledData - Class in nxopen.uf
-
- UFModlFeatures.AskSimpleHoleParmsData - Class in nxopen.uf
-
- UFModlFeatures.AskSweepData - Class in nxopen.uf
-
- UFModlFeatures.AskTaperFromEdges1Data - Class in nxopen.uf
-
- UFModlFeatures.AskTaperFromEdgesData - Class in nxopen.uf
-
- UFModlFeatures.AskTaperHoleParmsData - Class in nxopen.uf
-
- UFModlFeatures.AskThruCurves1Data - Class in nxopen.uf
-
- UFModlFeatures.AskThruCurvesData - Class in nxopen.uf
-
- UFModlFeatures.AskUGrooveParmsData - Class in nxopen.uf
-
- UFModlFeatures.CreateRelativeDplaneData - Class in nxopen.uf
-
- UFModlFeatures.CreateReparamSheetData - Class in nxopen.uf
-
- UFModlFeatures.CreateSimplifyData - Class in nxopen.uf
-
- UFModlFeatures.CreateSurfFromCloudData - Class in nxopen.uf
-
- UFModlFeatures.EditSimplifyParmsData - Class in nxopen.uf
-
- UFModlFeatures.IsodivideFaceData - Class in nxopen.uf
-
- UFModlGeneral - Interface in nxopen.uf
-
Contains wrappers for all 'UFModlGeneral' functions and data types.
- UFModlGeneral.AskBoundingBoxAlignedData - Class in nxopen.uf
-
- UFModlGeneral.AskBoundingBoxExactData - Class in nxopen.uf
-
- UFModlGeneral.AskCircularIsetParmsData - Class in nxopen.uf
-
- UFModlGeneral.AskCurveParmData - Class in nxopen.uf
-
- UFModlGeneral.AskCurvePropsData - Class in nxopen.uf
-
- UFModlGeneral.AskExpDescOfFeatData - Class in nxopen.uf
-
- UFModlGeneral.AskExpDescOfFrecData - Class in nxopen.uf
-
- UFModlGeneral.AskExpsOfFeatureData - Class in nxopen.uf
-
- UFModlGeneral.AskExpsOfPartData - Class in nxopen.uf
-
- UFModlGeneral.AskFeaturesOfExpData - Class in nxopen.uf
-
- UFModlGeneral.AskFeaturesOfUdfData - Class in nxopen.uf
-
- UFModlGeneral.AskLinearIsetParmsData - Class in nxopen.uf
-
- UFModlGeneral.AskPointAlongCurve2Data - Class in nxopen.uf
-
- UFModlGeneral.AskPrismParmsData - Class in nxopen.uf
-
- UFModlGeneral.AskPromotionPathData - Class in nxopen.uf
-
- UFModlGeneral.AskRpoDescOfFeatData - Class in nxopen.uf
-
- UFModlGeneral.AskRpoDescOfFrecData - Class in nxopen.uf
-
- UFModlGeneral.AskTorusParmsData - Class in nxopen.uf
-
- UFModlGeneral.AskUdfDefinitionData - Class in nxopen.uf
-
- UFModlGeneral.AskUdfParmsData - Class in nxopen.uf
-
- UFModlGeneral.Cre2dtrimBsurfData - Class in nxopen.uf
-
- UFModlGeneral.CreateBsEdgesData - Class in nxopen.uf
-
- UFModlGeneral.CreateBsurfaceData - Class in nxopen.uf
-
- UFModlGeneral.CreateBsurfData - Class in nxopen.uf
-
- UFModlGeneral.CreateGeodesicCurvesData - Class in nxopen.uf
-
- UFModlGeneral.CreateIsoclineCurvesData - Class in nxopen.uf
-
- UFModlGeneral.CreateIsocurveData - Class in nxopen.uf
-
- UFModlGeneral.CreateSplineData - Class in nxopen.uf
-
- UFModlGeneral.CreTrimBsurfData - Class in nxopen.uf
-
- UFModlGeneral.DissectExpStringData - Class in nxopen.uf
-
- UFModlGeneral.FixBsurfaceData - Class in nxopen.uf
-
- UFModlGeneral.RequireUdfMappingForEditData - Class in nxopen.uf
-
- UFModlGeneral.RequireUdfMappingForInsertData - Class in nxopen.uf
-
- UFModlGeneral.SmoothBsurfaceData - Class in nxopen.uf
-
- UFModlSmd - Interface in nxopen.uf
-
Contains wrappers for all 'UFModlSmd' functions and data types.
- UFModlUi - Interface in nxopen.uf
-
Contains wrappers for all 'UFModlUi' functions and data types.
- UFModlUi.ShapePatternCreateDialogData - Class in nxopen.uf
-
- UFMom - Interface in nxopen.uf
-
Contains wrappers for all 'UFMom' functions and data types.
- UFMotion - Interface in nxopen.uf
-
Contains wrappers for all 'UFMotion' functions and data types.
- UFMotion.AngularUnitsType - Class in nxopen.uf
-
- UFMotion.AnlGeometryFormat - Class in nxopen.uf
-
- UFMotion.Ask3dContactMethodData - Class in nxopen.uf
-
- UFMotion.AskAccelerationResultsData - Class in nxopen.uf
-
- UFMotion.AskAttachmentsOfTypeData - Class in nxopen.uf
-
- UFMotion.AskForceResultsData - Class in nxopen.uf
-
- UFMotion.AskRotDisplacementResultsData - Class in nxopen.uf
-
- UFMotion.AskTorqueResultsData - Class in nxopen.uf
-
- UFMotion.AskTransDisplacementResultsData - Class in nxopen.uf
-
- UFMotion.AskVelocityResultsData - Class in nxopen.uf
-
- UFMotion.ContactForce - Class in nxopen.uf
-
- UFMotion.ContactFriction - Class in nxopen.uf
-
- UFMotion.ContactMethod - Class in nxopen.uf
-
- UFMotion.ContactParameters - Class in nxopen.uf
-
- UFMotion.CreateInterferenceBodyData - Class in nxopen.uf
-
- UFMotion.CurveCurveConstraint - Class in nxopen.uf
-
- UFMotion.CylindricalBushing - Class in nxopen.uf
-
- UFMotion.DispAngle - Class in nxopen.uf
-
- UFMotion.FindAllFunctionsData - Class in nxopen.uf
-
- UFMotion.FuncComponentType - Class in nxopen.uf
-
- UFMotion.FuncRefFrameType - Class in nxopen.uf
-
- UFMotion.FuncResultType - Class in nxopen.uf
-
- UFMotion.Function - Class in nxopen.uf
-
- UFMotion.GeneralBushing - Class in nxopen.uf
-
- UFMotion.Interference - Class in nxopen.uf
-
- UFMotion.Joint - Class in nxopen.uf
-
- UFMotion.JointCoupler - Class in nxopen.uf
-
- UFMotion.JointCouplerType - Class in nxopen.uf
-
- UFMotion.JointLimits - Class in nxopen.uf
-
- UFMotion.JointMotionInput - Class in nxopen.uf
-
- UFMotion.JointMotionInputType - Class in nxopen.uf
-
- UFMotion.JointType - Class in nxopen.uf
-
- UFMotion.Link - Class in nxopen.uf
-
- UFMotion.LinkInitialVel - Class in nxopen.uf
-
- UFMotion.LinkMassProperties - Class in nxopen.uf
-
- UFMotion.Marker - Class in nxopen.uf
-
- UFMotion.MarkerType - Class in nxopen.uf
-
- UFMotion.Measurement - Class in nxopen.uf
-
- UFMotion.MeasurementType - Class in nxopen.uf
-
- UFMotion.Motion2DContact - Class in nxopen.uf
-
- UFMotion.Motion3DContact - Class in nxopen.uf
-
- UFMotion.MotionType - Class in nxopen.uf
-
- UFMotion.PointCurveConstraint - Class in nxopen.uf
-
- UFMotion.PointOnSurfaceData - Class in nxopen.uf
-
- UFMotion.PvExportType - Class in nxopen.uf
-
- UFMotion.ReferenceFrame - Class in nxopen.uf
-
- UFMotion.ScalarForceTorque - Class in nxopen.uf
-
- UFMotion.Solver - Class in nxopen.uf
-
- UFMotion.SolverParameters - Class in nxopen.uf
-
- UFMotion.SpringDamper - Class in nxopen.uf
-
- UFMotion.SpringDamperType - Class in nxopen.uf
-
- UFMotion.StlParameters - Class in nxopen.uf
-
- UFMotion.Trace - Class in nxopen.uf
-
- UFMotion.TraceModelData - Class in nxopen.uf
-
- UFMotion.VectorComponent - Class in nxopen.uf
-
- UFMotion.VectorForceTorque - Class in nxopen.uf
-
- UFMotion.VectorType - Class in nxopen.uf
-
- UFMsao - Interface in nxopen.uf
-
Contains wrappers for all 'UFMsao' functions and data types.
- UFMtx2 - Interface in nxopen.uf
-
Contains wrappers for all 'UFMtx2' functions and data types.
- UFMtx3 - Interface in nxopen.uf
-
Contains wrappers for all 'UFMtx3' functions and data types.
- UFMtx4 - Interface in nxopen.uf
-
Contains wrappers for all 'UFMtx4' functions and data types.
- UFNcgeom - Interface in nxopen.uf
-
Contains wrappers for all 'UFNcgeom' functions and data types.
- UFNcmthd - Interface in nxopen.uf
-
Contains wrappers for all 'UFNcmthd' functions and data types.
- UFNcprog - Interface in nxopen.uf
-
Contains wrappers for all 'UFNcprog' functions and data types.
- UFNxsm - Interface in nxopen.uf
-
Contains wrappers for all 'UFNxsm' functions and data types.
- UFNxsm.AskFlangeData - Class in nxopen.uf
-
- UFNxsm.BaseCflangeData - Class in nxopen.uf
-
- UFNxsm.BendData - Class in nxopen.uf
-
- UFNxsm.BendOption - Class in nxopen.uf
-
- UFNxsm.ClosedCornerData - Class in nxopen.uf
-
- UFNxsm.FeaturePropertyConstants - Class in nxopen.uf
-
- UFNxsm.FlangeData - Class in nxopen.uf
-
- UFNxsm.FlangeSketchData - Class in nxopen.uf
-
- UFNxsm.FlangeWidthOption - Class in nxopen.uf
-
- UFNxsm.FlatSolidData - Class in nxopen.uf
-
- UFNxsm.JogData - Class in nxopen.uf
-
- UFNxsm.MitreCflangeData - Class in nxopen.uf
-
- UFNxsm.RebendData - Class in nxopen.uf
-
- UFNxsm.SecCflangeData - Class in nxopen.uf
-
- UFNxsm.SecTabData - Class in nxopen.uf
-
- UFNxsm.TabData - Class in nxopen.uf
-
- UFNxsm.UnbendData - Class in nxopen.uf
-
- UFObj - Interface in nxopen.uf
-
Contains wrappers for all 'UFObj' functions and data types.
- UFObj.AskCreModVersionsData - Class in nxopen.uf
-
- UFObj.AskExtendedTypeAndSubtypeData - Class in nxopen.uf
-
- UFObj.AskTypeAndSubtypeData - Class in nxopen.uf
-
- UFObj.CreSettings - Class in nxopen.uf
-
- UFObj.DispProps - Class in nxopen.uf
-
- UFOper - Interface in nxopen.uf
-
Contains wrappers for all 'UFOper' functions and data types.
- UFOper.MachMode - Class in nxopen.uf
-
- UFOper.Status - Class in nxopen.uf
-
- UFParam - Interface in nxopen.uf
-
Contains wrappers for all 'UFParam' functions and data types.
- UFParam.AskDoubleVlaData - Class in nxopen.uf
-
- UFParam.AskInheritedParamsData - Class in nxopen.uf
-
- UFParam.AskIntVlaData - Class in nxopen.uf
-
- UFParam.AskRequiredParamsData - Class in nxopen.uf
-
- UFParam.AskTagVlaData - Class in nxopen.uf
-
- UFParam.AskUdesData - Class in nxopen.uf
-
- UFParam.ClrplaneStatus - Class in nxopen.uf
-
- UFParam.ClrplaneUsage - Class in nxopen.uf
-
- UFParam.ClvRangeType - Class in nxopen.uf
-
- UFParam.IndexAttribute - Class in nxopen.uf
-
- UFParam.LwplaneStatus - Class in nxopen.uf
-
- UFParam.LwplaneUsage - Class in nxopen.uf
-
- UFParam.Regen - Class in nxopen.uf
-
- UFParam.Status - Class in nxopen.uf
-
- UFParam.TtmoprSubopType - Class in nxopen.uf
-
- UFParam.TurnWorkpieceDirection - Class in nxopen.uf
-
- UFParam.TurnWorkpieceType - Class in nxopen.uf
-
- UFParam.Type - Class in nxopen.uf
-
- UFPart - Interface in nxopen.uf
-
Contains wrappers for all 'UFPart' functions and data types.
- UFPart.AskFamiliesData - Class in nxopen.uf
-
- UFPart.AskJtInfoOfPartData - Class in nxopen.uf
-
- UFPart.AskNthHistoryData - Class in nxopen.uf
-
- UFPart.CompressFlags - Class in nxopen.uf
-
- UFPart.CreateFamilyInstanceData - Class in nxopen.uf
-
- UFPart.ExportExpMode - Class in nxopen.uf
-
- UFPart.ExportOptions - Class in nxopen.uf
-
- UFPart.ExportParamsMode - Class in nxopen.uf
-
- UFPart.ImportPartModes - Class in nxopen.uf
-
- UFPart.ImportXtHiddenData - Class in nxopen.uf
-
- UFPart.LoadStatus - Class in nxopen.uf
-
- UFPart.OpenComponentAsData - Class in nxopen.uf
-
- UFPart.OpenData - Class in nxopen.uf
-
- UFPart.OpenQuietData - Class in nxopen.uf
-
- UFPart.OpenSingleComponentAsData - Class in nxopen.uf
-
- UFPart.SaveAllData - Class in nxopen.uf
-
- UFPart.UpdateFamilyInstanceData - Class in nxopen.uf
-
- UFPath - Interface in nxopen.uf
-
Contains wrappers for all 'UFPath' functions and data types.
- UFPath.ArcMode - Class in nxopen.uf
-
- UFPath.Axis - Class in nxopen.uf
-
- UFPath.CircularMotion - Class in nxopen.uf
-
- UFPath.ClampStatus - Class in nxopen.uf
-
- UFPath.ContactData - Class in nxopen.uf
-
- UFPath.CoolantType - Class in nxopen.uf
-
- UFPath.Cutcom - Class in nxopen.uf
-
- UFPath.CutcomMode - Class in nxopen.uf
-
- UFPath.CutcomOff - Class in nxopen.uf
-
- UFPath.CutcomOn - Class in nxopen.uf
-
- UFPath.Direction - Class in nxopen.uf
-
- UFPath.DwellUnit - Class in nxopen.uf
-
- UFPath.FeedrateMode - Class in nxopen.uf
-
- UFPath.FeedUnit - Class in nxopen.uf
-
- UFPath.Flush - Class in nxopen.uf
-
- UFPath.FlushType - Class in nxopen.uf
-
- UFPath.Guide - Class in nxopen.uf
-
- UFPath.HeadType - Class in nxopen.uf
-
- UFPath.HelicalMotion - Class in nxopen.uf
-
- UFPath.LevelMarker - Class in nxopen.uf
-
- UFPath.LinearMotion - Class in nxopen.uf
-
- UFPath.MachineMode - Class in nxopen.uf
-
- UFPath.MotionType - Class in nxopen.uf
-
- UFPath.OpSkip - Class in nxopen.uf
-
- UFPath.OutputMode - Class in nxopen.uf
-
- UFPath.ParallelMode - Class in nxopen.uf
-
- UFPath.PlaneType - Class in nxopen.uf
-
- UFPath.Pressure - Class in nxopen.uf
-
- UFPath.Rotate - Class in nxopen.uf
-
- UFPath.RotationObject - Class in nxopen.uf
-
- UFPath.RotationType - Class in nxopen.uf
-
- UFPath.Seqno - Class in nxopen.uf
-
- UFPath.Shape - Class in nxopen.uf
-
- UFPath.Side - Class in nxopen.uf
-
- UFPath.SpindleMode - Class in nxopen.uf
-
- UFPath.SpindleOn - Class in nxopen.uf
-
- UFPath.TankType - Class in nxopen.uf
-
- UFPath.ToolChange - Class in nxopen.uf
-
- UFPath.TrackingPointChange - Class in nxopen.uf
-
- UFPatt - Interface in nxopen.uf
-
Contains wrappers for all 'UFPatt' functions and data types.
- UFPatt.AskData - Class in nxopen.uf
-
- UFPatt.AskParamsData - Class in nxopen.uf
-
- UFPatt.CycleErrorsData - Class in nxopen.uf
-
- UFPatt.Switch - Class in nxopen.uf
-
- UFPd - Interface in nxopen.uf
-
Contains wrappers for all 'UFPd' functions and data types.
- UFPd.AskBusinessProcessModifiersData - Class in nxopen.uf
-
- UFPd.AskDefinitionAllowableGeometryData - Class in nxopen.uf
-
- UFPd.AskProductAttribuesData - Class in nxopen.uf
-
- UFPd.AskProductAttributesData - Class in nxopen.uf
-
- UFPd.AskProductDefinitionsData - Class in nxopen.uf
-
- UFPd.AskProductDefinitionsInstancesData - Class in nxopen.uf
-
- UFPd.AskProductDefinitionsOfGeometryData - Class in nxopen.uf
-
- UFPd.AttributeType - Class in nxopen.uf
-
- UFPd.AttributeValue - Class in nxopen.uf
-
- UFPd.AttributeValueData - Class in nxopen.uf
-
- UFPd.AttributeValueData2 - Class in nxopen.uf
-
- UFPd.AttributeValueString - Class in nxopen.uf
-
- UFPd.AttributeValueType - Class in nxopen.uf
-
- UFPd.BusinessModifier - Class in nxopen.uf
-
- UFPd.BusModfrType - Class in nxopen.uf
-
- UFPd.ProductAttribute - Class in nxopen.uf
-
- UFPd.ProductAttribute2 - Class in nxopen.uf
-
- UFPd.ProductDefinition - Class in nxopen.uf
-
- UFPd.ProductDefinitionInstanceType - Class in nxopen.uf
-
- UFPd.ProductDefinitionLeaderAssocPntType - Class in nxopen.uf
-
- UFPlist - Interface in nxopen.uf
-
Contains wrappers for all 'UFPlist' functions and data types.
- UFPlist.AskAttachedRowsData - Class in nxopen.uf
-
- UFPlist.AskObjectsData - Class in nxopen.uf
-
- UFPlist.AskTagsData - Class in nxopen.uf
-
- UFPlist.ColPrefs - Class in nxopen.uf
-
- UFPlist.ColumnType - Class in nxopen.uf
-
- UFPlist.FieldFormat - Class in nxopen.uf
-
- UFPlist.GrowDirection - Class in nxopen.uf
-
- UFPlist.LdrMethod - Class in nxopen.uf
-
- UFPlist.Prefs - Class in nxopen.uf
-
- UFPlist.SymbolType - Class in nxopen.uf
-
- UFPlist.TraversalSettings - Class in nxopen.uf
-
- UFPlot - Interface in nxopen.uf
-
Contains wrappers for all 'UFPlot' functions and data types.
- UFPlot.AskDefaultPrinterAndProfileData - Class in nxopen.uf
-
- UFPlot.AskPrinterGroupsData - Class in nxopen.uf
-
- UFPlot.AskPrinterNamesData - Class in nxopen.uf
-
- UFPlot.AskProfileNamesData - Class in nxopen.uf
-
- UFPlot.BannerOptions - Class in nxopen.uf
-
- UFPlot.CmpColorWidth - Class in nxopen.uf
-
- UFPlot.Colors - Class in nxopen.uf
-
- UFPlot.CreateCmpResultPlot - Class in nxopen.uf
-
- UFPlot.DiffCmpStatus - Class in nxopen.uf
-
- UFPlot.Extents - Class in nxopen.uf
-
- UFPlot.Format - Class in nxopen.uf
-
- UFPlot.JobOptions - Class in nxopen.uf
-
- UFPlot.PrinterGroup - Class in nxopen.uf
-
- UFPlot.Rotation - Class in nxopen.uf
-
- UFPlot.UghpglCmpOptions - Class in nxopen.uf
-
- UFPlot.Units - Class in nxopen.uf
-
- UFPlot.Widths - Class in nxopen.uf
-
- UFPoint - Interface in nxopen.uf
-
Contains wrappers for all 'UFPoint' functions and data types.
- UFProcessAid - Interface in nxopen.uf
-
Contains wrappers for all 'UFProcessAid' functions and data types.
- UFProcessAid.AskChildrenFeaturesData - Class in nxopen.uf
-
- UFProcessAid.AskDatumObjectsData - Class in nxopen.uf
-
- UFProcessAid.AskLinkObjectsData - Class in nxopen.uf
-
- UFProcessAid.AskSectionOfDatumData - Class in nxopen.uf
-
- UFProcessAid.AskSourceObjectData - Class in nxopen.uf
-
- UFProcessAid.IsDatumObjectData - Class in nxopen.uf
-
- UFProcessAid.PopulateAttrListData - Class in nxopen.uf
-
- UFProcessAid.Types - Class in nxopen.uf
-
- UFPs - Interface in nxopen.uf
-
Contains wrappers for all 'UFPs' functions and data types.
- UFPs.AskJournalData - Class in nxopen.uf
-
- UFPs.KernelVersion - Class in nxopen.uf
-
- UFPs.Unexported - Class in nxopen.uf
-
- UFRoute - Interface in nxopen.uf
-
Contains wrappers for all 'UFRoute' functions and data types.
- UFRoute.AppViewDesc - Class in nxopen.uf
-
- UFRoute.AskAnchorStock - Class in nxopen.uf
-
- UFRoute.AskAnchorStockData - Class in nxopen.uf
-
- UFRoute.AskAppViewDefStockData - Class in nxopen.uf
-
- UFRoute.AskAppViewExtPlibData - Class in nxopen.uf
-
- UFRoute.AskAppViewFabCharxData - Class in nxopen.uf
-
- UFRoute.AskAppViewOptCharxData - Class in nxopen.uf
-
- UFRoute.AskAppViewReqCharxData - Class in nxopen.uf
-
- UFRoute.AskAppViewSysIntsData - Class in nxopen.uf
-
- UFRoute.AskBuiltInPathObjsData - Class in nxopen.uf
-
- UFRoute.AskBuiltInPathsData - Class in nxopen.uf
-
- UFRoute.AskCrossCurvesData - Class in nxopen.uf
-
- UFRoute.AskCrossStockData - Class in nxopen.uf
-
- UFRoute.AskHarnessCompsData - Class in nxopen.uf
-
- UFRoute.AskHarnessWiresData - Class in nxopen.uf
-
- UFRoute.AskLoadedBendTablesData - Class in nxopen.uf
-
- UFRoute.AskMultiportStringsData - Class in nxopen.uf
-
- UFRoute.AskMultiportTagsData - Class in nxopen.uf
-
- UFRoute.AskMultiportTerminalsData - Class in nxopen.uf
-
- UFRoute.AskObjCornerInfoData - Class in nxopen.uf
-
- UFRoute.AskObjectPortData - Class in nxopen.uf
-
- UFRoute.AskPartOccPortsData - Class in nxopen.uf
-
- UFRoute.AskPartRcpsData - Class in nxopen.uf
-
- UFRoute.AskPartSegsData - Class in nxopen.uf
-
- UFRoute.AskPlacesTransformData - Class in nxopen.uf
-
- UFRoute.AskPortConnectedPortData - Class in nxopen.uf
-
- UFRoute.AskPortLockInfoData - Class in nxopen.uf
-
- UFRoute.AskPortTerminalPortsData - Class in nxopen.uf
-
- UFRoute.AskRcpAtTermPortData - Class in nxopen.uf
-
- UFRoute.AskRcpPortsData - Class in nxopen.uf
-
- UFRoute.AskRcpSegmentsData - Class in nxopen.uf
-
- UFRoute.AskRcpSegsData - Class in nxopen.uf
-
- UFRoute.AskRouteObjsData - Class in nxopen.uf
-
- UFRoute.AskSegmentEndPntsData - Class in nxopen.uf
-
- UFRoute.AskSegmentEndPropsData - Class in nxopen.uf
-
- UFRoute.AskSegmentIntPartsData - Class in nxopen.uf
-
- UFRoute.AskSegmentPathsData - Class in nxopen.uf
-
- UFRoute.AskSegmentRoutesData - Class in nxopen.uf
-
- UFRoute.AskSegmentsPathsData - Class in nxopen.uf
-
- UFRoute.AskSegmentStockData - Class in nxopen.uf
-
- UFRoute.AskSegmentWiresData - Class in nxopen.uf
-
- UFRoute.AskStockDataAnchorsData - Class in nxopen.uf
-
- UFRoute.AskStockDataCrossData - Class in nxopen.uf
-
- UFRoute.AskStockDataStockData - Class in nxopen.uf
-
- UFRoute.AskStockHarnessData - Class in nxopen.uf
-
- UFRoute.AskStockSegmentsData - Class in nxopen.uf
-
- UFRoute.AskStockWiresData - Class in nxopen.uf
-
- UFRoute.AskWireHarnessData - Class in nxopen.uf
-
- UFRoute.AskWireSegmentsData - Class in nxopen.uf
-
- UFRoute.AskWireStockData - Class in nxopen.uf
-
- UFRoute.CharDesc - Class in nxopen.uf
-
- UFRoute.CheckDesignRulesData - Class in nxopen.uf
-
- UFRoute.CreateBendByRadiusData - Class in nxopen.uf
-
- UFRoute.CreateBendByRatioData - Class in nxopen.uf
-
- UFRoute.CreateBendByTableData - Class in nxopen.uf
-
- UFRoute.CreateRcpAtPortData - Class in nxopen.uf
-
- UFRoute.CreateRcpByWcsOffData - Class in nxopen.uf
-
- UFRoute.CreateRcpByWorkPosData - Class in nxopen.uf
-
- UFRoute.CreateRcpOnRcpData - Class in nxopen.uf
-
- UFRoute.DesignRuleData - Class in nxopen.uf
-
- UFRoute.FindPathData - Class in nxopen.uf
-
- UFRoute.GetNextConnectionsData - Class in nxopen.uf
-
- UFRoute.LoadAppViewListData - Class in nxopen.uf
-
- UFRoute.LoadStockData - Class in nxopen.uf
-
- UFRoute.MergeRcpsData - Class in nxopen.uf
-
- UFRoute.SimplifySegmentsData - Class in nxopen.uf
-
- UFRoute.SolvePlacesData - Class in nxopen.uf
-
- UFRoute.SystemInterface - Class in nxopen.uf
-
- UFRoute.TagList - Class in nxopen.uf
-
- UFRouteRun - Interface in nxopen.uf
-
Contains wrappers for all 'UFRouteRun' functions and data types.
- UFRouteRun.AskFromItemsData - Class in nxopen.uf
-
- UFRouteRun.AskMemberItemsData - Class in nxopen.uf
-
- UFRouteRun.AskRunIdAndTypeData - Class in nxopen.uf
-
- UFRouteRun.AskRunsInPartData - Class in nxopen.uf
-
- UFRouteRun.AskToItemsData - Class in nxopen.uf
-
- UFRule - Interface in nxopen.uf
-
Contains wrappers for all 'UFRule' functions and data types.
- UFRule.AskFunctionRulesData - Class in nxopen.uf
-
- UFRule.AskObjectViolationsData - Class in nxopen.uf
-
- UFRule.AskOverrideViolationsData - Class in nxopen.uf
-
- UFRule.AskRuleViosData - Class in nxopen.uf
-
- UFRule.AskRuleViosSinceData - Class in nxopen.uf
-
- UFRule.AskVioObjectsData - Class in nxopen.uf
-
- UFScop - Interface in nxopen.uf
-
Contains wrappers for all 'UFScop' functions and data types.
- UFScop.AskRowColumnCountData - Class in nxopen.uf
-
- UFScop.GetNextDrivePointData - Class in nxopen.uf
-
- UFScop.TxIntpDataType - Class in nxopen.uf
-
- UFScop.TxIntpMethod - Class in nxopen.uf
-
- UFScop.VectorData - Class in nxopen.uf
-
- UFSession - Interface in nxopen
-
Represents the UFSession
- UFSetup - Interface in nxopen.uf
-
Contains wrappers for all 'UFSetup' functions and data types.
- UFSetup.OutputUnits - Class in nxopen.uf
-
- UFSf - Interface in nxopen.uf
-
Contains wrappers for all 'UFSf' functions and data types.
- UFSf.AskAllPolygonBodiesData - Class in nxopen.uf
-
- UFSf.AskBeamEndMassData - Class in nxopen.uf
-
- UFSf.AskClosestPointData - Class in nxopen.uf
-
- UFSf.AskCombinedLoadCaseData - Class in nxopen.uf
-
- UFSf.AskCombinedLoadCasesData - Class in nxopen.uf
-
- UFSf.AskDursolNxData - Class in nxopen.uf
-
- UFSf.AskElementData - Class in nxopen.uf
-
- UFSf.AskElementEdgesData - Class in nxopen.uf
-
- UFSf.AskGeomData - Class in nxopen.uf
-
- UFSf.AskIdealizeParmFacesData - Class in nxopen.uf
-
- UFSf.AskIdealizeRegionData - Class in nxopen.uf
-
- UFSf.AskLanguageData - Class in nxopen.uf
-
- UFSf.AskLibraryMaterialsData - Class in nxopen.uf
-
- UFSf.AskLvNxData - Class in nxopen.uf
-
- UFSf.AskMeshMatingConditionData - Class in nxopen.uf
-
- UFSf.AskNodeData - Class in nxopen.uf
-
- UFSf.AskNodePgeomsData - Class in nxopen.uf
-
- UFSf.AskSolutionNxData - Class in nxopen.uf
-
- UFSf.AskStepNxData - Class in nxopen.uf
-
- UFSf.AssemblyType - Class in nxopen.uf
-
- UFSf.AutoCreateMeshMatingConditionData - Class in nxopen.uf
-
- UFSf.AutoCreateSurfaceContactMeshData - Class in nxopen.uf
-
- UFSf.BodyAskEdgesData - Class in nxopen.uf
-
- UFSf.BodyAskFacesData - Class in nxopen.uf
-
- UFSf.BodyAskVolumeAndCentroidData - Class in nxopen.uf
-
- UFSf.ColorAttr - Class in nxopen.uf
-
- UFSf.ContactMeshData - Class in nxopen.uf
-
- UFSf.CreateAutoFaceSubdivData - Class in nxopen.uf
-
- UFSf.CreateIdealizeBodyData - Class in nxopen.uf
-
- UFSf.CreateIdealizeRegionData - Class in nxopen.uf
-
- UFSf.DispMesh - Class in nxopen.uf
-
- UFSf.DursolDesignLifeCriterion - Class in nxopen.uf
-
- UFSf.DursolFatigueLifeCriterion - Class in nxopen.uf
-
- UFSf.DursolLocateAllMembersNxData - Class in nxopen.uf
-
- UFSf.DursolStressCriterion - Class in nxopen.uf
-
- UFSf.DursolStressType - Class in nxopen.uf
-
- UFSf.EdgeAskAdjacentEdgesData - Class in nxopen.uf
-
- UFSf.EdgeAskEndPointsData - Class in nxopen.uf
-
- UFSf.EdgeAskFacesData - Class in nxopen.uf
-
- UFSf.EdgeDensityData - Class in nxopen.uf
-
- UFSf.EdgeDensityType - Class in nxopen.uf
-
- UFSf.EdgeEvaluateClosestPointData - Class in nxopen.uf
-
- UFSf.EditIdealizeParmsData - Class in nxopen.uf
-
- UFSf.EfConnInfo - Class in nxopen.uf
-
- UFSf.ElementType - Class in nxopen.uf
-
- UFSf.ElmAdaptivityType - Class in nxopen.uf
-
- UFSf.ElmDimensionType - Class in nxopen.uf
-
- UFSf.FaceAskAdjacentFacesData - Class in nxopen.uf
-
- UFSf.FaceAskEdgesData - Class in nxopen.uf
-
- UFSf.FaceSubdivStatus - Class in nxopen.uf
-
- UFSf.FemValueType - Class in nxopen.uf
-
- UFSf.FindMeshData - Class in nxopen.uf
-
- UFSf.FindMinimumDistanceData - Class in nxopen.uf
-
- UFSf.GeomOptions - Class in nxopen.uf
-
- UFSf.GetExtremeValuesData - Class in nxopen.uf
-
- UFSf.IdealizeParmExp - Class in nxopen.uf
-
- UFSf.IdealizeParmFace - Class in nxopen.uf
-
- UFSf.IsMidsrfData - Class in nxopen.uf
-
- UFSf.IsUserdefMidsrfData - Class in nxopen.uf
-
- UFSf.LangAnalysisType - Class in nxopen.uf
-
- UFSf.LangLinearity - Class in nxopen.uf
-
- UFSf.LangProblemAbstract - Class in nxopen.uf
-
- UFSf.LangTimeDepend - Class in nxopen.uf
-
- UFSf.LibraryMaterial - Class in nxopen.uf
-
- UFSf.LocateAllMeshesData - Class in nxopen.uf
-
- UFSf.LocateElementByIdData - Class in nxopen.uf
-
- UFSf.LocateElementData - Class in nxopen.uf
-
- UFSf.LocateHptMgParentsData - Class in nxopen.uf
-
- UFSf.LocateMeshMatingConditionListData - Class in nxopen.uf
-
- UFSf.LocateNodeByIdData - Class in nxopen.uf
-
- UFSf.LocateNodesOnElementData - Class in nxopen.uf
-
- UFSf.LocateNodesOnGeometryData - Class in nxopen.uf
-
- UFSf.LocateNodesOnMeshData - Class in nxopen.uf
-
- UFSf.LocateScenariosData - Class in nxopen.uf
-
- UFSf.LocateSolutionBoundaryConditionsNxData - Class in nxopen.uf
-
- UFSf.LocateSolutionLoadsNxData - Class in nxopen.uf
-
- UFSf.LocateStepBoundaryConditionsNxData - Class in nxopen.uf
-
- UFSf.LocateStepLoadsNxData - Class in nxopen.uf
-
- UFSf.LvFunctionMode - Class in nxopen.uf
-
- UFSf.McResultFormat - Class in nxopen.uf
-
- UFSf.MeshDimension - Class in nxopen.uf
-
- UFSf.MeshError - Class in nxopen.uf
-
- UFSf.MeshErrorContainer - Class in nxopen.uf
-
- UFSf.MeshErrorList - Class in nxopen.uf
-
- UFSf.MeshErrorType - Class in nxopen.uf
-
- UFSf.MeshGeometryTypes - Class in nxopen.uf
-
- UFSf.MeshGeomMeshdir - Class in nxopen.uf
-
- UFSf.MeshGeomUsage - Class in nxopen.uf
-
- UFSf.MeshVisuals - Class in nxopen.uf
-
- UFSf.MidNodeType - Class in nxopen.uf
-
- UFSf.MidsrfUserParms - Class in nxopen.uf
-
- UFSf.MultiPropType - Class in nxopen.uf
-
- UFSf.NeutralMaterialTypes - Class in nxopen.uf
-
- UFSf.NodeBtype - Class in nxopen.uf
-
- UFSf.NodeSwitch - Class in nxopen.uf
-
- UFSf.OrientationData - Class in nxopen.uf
-
- UFSf.PartitionBodyData - Class in nxopen.uf
-
- UFSf.PartitionBodyNx5Data - Class in nxopen.uf
-
- UFSf.ResultingFacePairs - Class in nxopen.uf
-
- UFSf.ScenarioInfo - Class in nxopen.uf
-
- UFSf.Sf0dDensityType - Class in nxopen.uf
-
- UFSf.Sf0dElementType - Class in nxopen.uf
-
- UFSf.Sf1dDensityType - Class in nxopen.uf
-
- UFSf.Sf1dElementType - Class in nxopen.uf
-
- UFSf.Sf1dMeshData - Class in nxopen.uf
-
- UFSf.Ugs2dMesherElemType - Class in nxopen.uf
-
- UFSf.Ugs2dMeshParms - Class in nxopen.uf
-
- UFSf.UgsAbstractionFilletTypeOption - Class in nxopen.uf
-
- UFSf.UgsMeshAbstractionParams - Class in nxopen.uf
-
- UFSf.UgsMesherMidnodeOption - Class in nxopen.uf
-
- UFSf.UgsTetMeshFilletTypeOption - Class in nxopen.uf
-
- UFSf.UgsTetMeshParms - Class in nxopen.uf
-
- UFSfCurve - Interface in nxopen.uf
-
Contains wrappers for all 'UFSfCurve' functions and data types.
- UFSfl - Interface in nxopen.uf
-
Contains wrappers for all 'UFSfl' functions and data types.
- UFSfLegend - Interface in nxopen.uf
-
Contains wrappers for all 'UFSfLegend' functions and data types.
- UFSfLegend.Attr - Class in nxopen.uf
-
- UFSfLegend.IndexAttr - Class in nxopen.uf
-
- UFSfLegend.IndexColorAttr - Class in nxopen.uf
-
- UFSfLegend.IndexTextAttr - Class in nxopen.uf
-
- UFSfLegend.TextJustification - Class in nxopen.uf
-
- UFSfLegend.Title - Class in nxopen.uf
-
- UFSfPost - Interface in nxopen.uf
-
Contains wrappers for all 'UFSfPost' functions and data types.
- UFSfPost.LayoutType - Class in nxopen.uf
-
- UFSfPost.Target - Class in nxopen.uf
-
- UFShopdoc - Interface in nxopen.uf
-
Contains wrappers for all 'UFShopdoc' functions and data types.
- UFSim - Interface in nxopen.uf
-
Contains wrappers for all 'UFSim' functions and data types.
- UFSim.AskAxisDofJunctionData - Class in nxopen.uf
-
- UFSim.AskAxisLimitsData - Class in nxopen.uf
-
- UFSim.AskDegofData - Class in nxopen.uf
-
- UFSim.AskInitJunctionXformData - Class in nxopen.uf
-
- UFSim.AskJunctionXformData - Class in nxopen.uf
-
- UFSim.AskNcAxesOfMtoolData - Class in nxopen.uf
-
- UFSim.AskToolOffsetsData - Class in nxopen.uf
-
- UFSim.AxisRotDirType - Class in nxopen.uf
-
- UFSim.ConvertNurbsToPositionData - Class in nxopen.uf
-
- UFSim.CuttingMode - Class in nxopen.uf
-
- UFSim.KimDegOfTypes - Class in nxopen.uf
-
- UFSim.SvKimDegofDirection - Class in nxopen.uf
-
- UFSim.ToolClass - Class in nxopen.uf
-
- UFSim.TransformOffsetAcsToMtcsData - Class in nxopen.uf
-
- UFSim.UnitType - Class in nxopen.uf
-
- UFSket - Interface in nxopen.uf
-
Contains wrappers for all 'UFSket' functions and data types.
- UFSket.AddExtractedObjectsData - Class in nxopen.uf
-
- UFSket.AskConstraintsOfGeometryData - Class in nxopen.uf
-
- UFSket.AskConstraintsOfSketchData - Class in nxopen.uf
-
- UFSket.AskDimensionsOfSketchData - Class in nxopen.uf
-
- UFSket.AskDimStatusData - Class in nxopen.uf
-
- UFSket.AskExpsOfSketchData - Class in nxopen.uf
-
- UFSket.AskGeoConsOfGeometryData - Class in nxopen.uf
-
- UFSket.AskGeoConsOfSketchData - Class in nxopen.uf
-
- UFSket.AskGeomsOfSketchData - Class in nxopen.uf
-
- UFSket.AskInferredConsOfSketchData - Class in nxopen.uf
-
- UFSket.AskLegacyPreferencesData - Class in nxopen.uf
-
- UFSket.AskPreferencesData - Class in nxopen.uf
-
- UFSket.AskSketchStatusData - Class in nxopen.uf
-
- UFSket.AssocType - Class in nxopen.uf
-
- UFSket.ConClass - Class in nxopen.uf
-
- UFSket.ConGeom - Class in nxopen.uf
-
- UFSket.ConType - Class in nxopen.uf
-
- UFSket.DimObject - Class in nxopen.uf
-
- UFSket.GeomVertex - Class in nxopen.uf
-
- UFSket.HelpType - Class in nxopen.uf
-
- UFSket.Info - Class in nxopen.uf
-
- UFSket.InitializeSketchData - Class in nxopen.uf
-
- UFSket.MirrorObjectsData - Class in nxopen.uf
-
- UFSket.ReadDimensionalConstraintData - Class in nxopen.uf
-
- UFSket.ReadDimensionData - Class in nxopen.uf
-
- UFSket.ReadGeometricConstraintData - Class in nxopen.uf
-
- UFSket.ReferenceStatus - Class in nxopen.uf
-
- UFSket.Status - Class in nxopen.uf
-
- UFSmd - Interface in nxopen.uf
-
Contains wrappers for all 'UFSmd' functions and data types.
- UFSmd.AngleTypeE - Class in nxopen.uf
-
- UFSmd.AskBendLineData - Class in nxopen.uf
-
- UFSmd.AskBendLinesData - Class in nxopen.uf
-
- UFSmd.AskBendTanLinesData - Class in nxopen.uf
-
- UFSmd.AskChildPipNodesData - Class in nxopen.uf
-
- UFSmd.AskContourLinesData - Class in nxopen.uf
-
- UFSmd.AskFormblkLinesData - Class in nxopen.uf
-
- UFSmd.AskFpAddCurvesData - Class in nxopen.uf
-
- UFSmd.AskFpChildrenData - Class in nxopen.uf
-
- UFSmd.AskFpFacesData - Class in nxopen.uf
-
- UFSmd.BafOptionsE - Class in nxopen.uf
-
- UFSmd.BatAngleTypeE - Class in nxopen.uf
-
- UFSmd.BatRadiusTypeE - Class in nxopen.uf
-
- UFSmd.ChkStdResults - Class in nxopen.uf
-
- UFSmd.EvalTrimAnglesData - Class in nxopen.uf
-
- UFSmd.FormingMethodE - Class in nxopen.uf
-
- UFSmd.FormOutput - Class in nxopen.uf
-
- UFSmd.FpPrefs - Class in nxopen.uf
-
- UFSmd.GenPrefs - Class in nxopen.uf
-
- UFSmd.PipNodeData - Class in nxopen.uf
-
- UFSmd.PipSequentialE - Class in nxopen.uf
-
- UFSmd.PipTypeEnumE - Class in nxopen.uf
-
- UFSmd.RadiusTypeE - Class in nxopen.uf
-
- UFSmd.SeqInput - Class in nxopen.uf
-
- UFSmd.SeqOutput - Class in nxopen.uf
-
- UFSo - Interface in nxopen.uf
-
Contains wrappers for all 'UFSo' functions and data types.
- UFSo.AskChildrenData - Class in nxopen.uf
-
- UFSo.AskParentsData - Class in nxopen.uf
-
- UFSo.DirrOnCurveOption - Class in nxopen.uf
-
- UFSo.DirrOnSurfData - Class in nxopen.uf
-
- UFSo.OffsetCurveCvtrData - Class in nxopen.uf
-
- UFSo.OffsetSurfCvtrData - Class in nxopen.uf
-
- UFSo.PointAlongCurveOption - Class in nxopen.uf
-
- UFSo.ScalarDimOption - Class in nxopen.uf
-
- UFSo.SplineData - Class in nxopen.uf
-
- UFSo.UpdateOption - Class in nxopen.uf
-
- UFSo.VisibilityOption - Class in nxopen.uf
-
- UFSpsd - Interface in nxopen.uf
-
Contains wrappers for all 'UFSpsd' functions and data types.
- UFStd - Interface in nxopen.uf
-
Contains wrappers for all 'UFStd' functions and data types.
- UFStd.ImportStlAsciiFileData - Class in nxopen.uf
-
- UFStd.ImportStlBinaryFileData - Class in nxopen.uf
-
- UFStd.ImportVrmlFileData - Class in nxopen.uf
-
- UFStd.PutSheetsInStlFileData - Class in nxopen.uf
-
- UFStd.PutSolidInStlFileData - Class in nxopen.uf
-
- UFStd.StlError - Class in nxopen.uf
-
- UFStd.StlParams - Class in nxopen.uf
-
- UFStd.VrmlParams - Class in nxopen.uf
-
- UFStudio - Interface in nxopen.uf
-
Contains wrappers for all 'UFStudio' functions and data types.
- UFStudio.StybldCont - Class in nxopen.uf
-
- UFStudio.StybldCurveTrans - Class in nxopen.uf
-
- UFStudio.StybldDirect - Class in nxopen.uf
-
- UFStudio.StybldMethod - Class in nxopen.uf
-
- UFStudio.StybldMinrad - Class in nxopen.uf
-
- UFStudio.StybldShapeTrans - Class in nxopen.uf
-
- UFStudio.StybldStiff - Class in nxopen.uf
-
- UFStudio.StybldTrans - Class in nxopen.uf
-
- UFStudio.StybldTrim - Class in nxopen.uf
-
- UFStudio.StybldVDegree - Class in nxopen.uf
-
- UFStyler - Interface in nxopen.uf
-
Contains wrappers for all 'UFStyler' functions and data types.
- UFSubdiv - Interface in nxopen.uf
-
Contains wrappers for all 'UFSubdiv' functions and data types.
- UFSubdiv.AskParmsData - Class in nxopen.uf
-
- UFSubdiv.DataStructuresUnion - Class in nxopen.uf
-
- UFSubdiv.Isocline - Class in nxopen.uf
-
- UFSubdiv.Type - Class in nxopen.uf
-
- UFSurfReg - Interface in nxopen.uf
-
Contains wrappers for all 'UFSurfReg' functions and data types.
- UFSurfReg.Type - Class in nxopen.uf
-
- UFTabnot - Interface in nxopen.uf
-
Contains wrappers for all 'UFTabnot' functions and data types.
- UFTabnot.AskMergeInfoData - Class in nxopen.uf
-
- UFTabnot.AttachPoint - Class in nxopen.uf
-
- UFTabnot.CellPrefs - Class in nxopen.uf
-
- UFTabnot.DisplayContinuationNote - Class in nxopen.uf
-
- UFTabnot.FitMethod - Class in nxopen.uf
-
- UFTabnot.Format - Class in nxopen.uf
-
- UFTabnot.HeaderLocation - Class in nxopen.uf
-
- UFTabnot.Just - Class in nxopen.uf
-
- UFTabnot.OverflowDirection - Class in nxopen.uf
-
- UFTabnot.SectionPrefs - Class in nxopen.uf
-
- UFTabnot.SortData - Class in nxopen.uf
-
- UFTabnot.SortDirection - Class in nxopen.uf
-
- UFTabnot.ZeroDisplay - Class in nxopen.uf
-
- UFTag - Interface in nxopen.uf
-
Contains wrappers for all 'UFTag' functions and data types.
- UFTag.DecomposeHandleData - Class in nxopen.uf
-
- UFText - Interface in nxopen.uf
-
Contains wrappers for all 'UFText' functions and data types.
- UFText.ModeS - Class in nxopen.uf
-
- UFText.TruncateData - Class in nxopen.uf
-
- UFTrns - Interface in nxopen.uf
-
Contains wrappers for all 'UFTrns' functions and data types.
- UFTrns.CreateCsysMappingMatrixData - Class in nxopen.uf
-
- UFTrns.CreateReflectionMatrixData - Class in nxopen.uf
-
- UFTrns.CreateRotationMatrixData - Class in nxopen.uf
-
- UFTrns.CreateScalingMatrixData - Class in nxopen.uf
-
- UFTrns.TransformObjectsData - Class in nxopen.uf
-
- UFTurn - Interface in nxopen.uf
-
Contains wrappers for all 'UFTurn' functions and data types.
- UFTurn.AskCutRegionOfIndexData - Class in nxopen.uf
-
- UFTurn.AskCutRegionsExistData - Class in nxopen.uf
-
- UFTurn.CutRegionsLocation - Class in nxopen.uf
-
- UFTurn.IpwBoxData - Class in nxopen.uf
-
- UFTurn.TeachmodeCreateSubopData - Class in nxopen.uf
-
- UFUde - Interface in nxopen.uf
-
Contains wrappers for all 'UFUde' functions and data types.
- UFUde.AskParamsData - Class in nxopen.uf
-
- UFUde.ParamToggle - Class in nxopen.uf
-
- UFUde.ParamType - Class in nxopen.uf
-
- UFUde.SetType - Class in nxopen.uf
-
- UFUdop - Interface in nxopen.uf
-
Contains wrappers for all 'UFUdop' functions and data types.
- UFUdop.Purpose - Class in nxopen.uf
-
- UFUgfont - Interface in nxopen.uf
-
Contains wrappers for all 'UFUgfont' functions and data types.
- UFUgfont.AskFontStylesData - Class in nxopen.uf
-
- UFUgfont.FontHeader - Class in nxopen.uf
-
- UFUgfont.Type - Class in nxopen.uf
-
- UFUgmgr - Interface in nxopen.uf
-
Contains wrappers for all 'UFUgmgr' functions and data types.
- UFUgmgr.AltIdStatus - Class in nxopen.uf
-
- UFUgmgr.AskDependentFilesData - Class in nxopen.uf
-
- UFUgmgr.AskFamilyMemberHandlesData - Class in nxopen.uf
-
- UFUgmgr.AskPartNameDescData - Class in nxopen.uf
-
- UFUgmgr.AskProductAssembliesData - Class in nxopen.uf
-
- UFUgmgr.AskVariantConfigurationsForDisplayData - Class in nxopen.uf
-
- UFUgmgr.AskVariantConfigurationsForLoadData - Class in nxopen.uf
-
- UFUgmgr.AssignAlternatePartIdData - Class in nxopen.uf
-
- UFUgmgr.AssignCopyDsetNameData - Class in nxopen.uf
-
- UFUgmgr.AssignNewDsetNameData - Class in nxopen.uf
-
- UFUgmgr.AssignPartNumberData - Class in nxopen.uf
-
- UFUgmgr.AssignPartRevData - Class in nxopen.uf
-
- UFUgmgr.DecodePartFileNameData - Class in nxopen.uf
-
- UFUgmgr.InvokePdmServerData - Class in nxopen.uf
-
- UFUgmgr.ListConfigRulesData - Class in nxopen.uf
-
- UFUgmgr.ListContextsData - Class in nxopen.uf
-
- UFUgmgr.ListFolderContentsData - Class in nxopen.uf
-
- UFUgmgr.ListIdDisplayRulesData - Class in nxopen.uf
-
- UFUgmgr.ListIdTypesData - Class in nxopen.uf
-
- UFUgmgr.ListPartRevFilesData - Class in nxopen.uf
-
- UFUgmgr.ListPartRevisionsData - Class in nxopen.uf
-
- UFUgmgr.ListPartsInFolderData - Class in nxopen.uf
-
- UFUgmgr.ObjectType - Class in nxopen.uf
-
- UFUgmgr.PartnoStatus - Class in nxopen.uf
-
- UFUgmgr.PartrevWhereUsedData - Class in nxopen.uf
-
- UFUgmgr.ValidateAlternatePartIdData - Class in nxopen.uf
-
- UFUgmgr.ValidatePartRevData - Class in nxopen.uf
-
- UFUgmgr.VariantConfiguration - Class in nxopen.uf
-
- UFUgmgrKf - Interface in nxopen.uf
-
Contains wrappers for all 'UFUgmgrKf' functions and data types.
- UFUi - Interface in nxopen.uf
-
Contains wrappers for all 'UFUi' functions and data types.
- UFUi.AskCreatePartFilenameData - Class in nxopen.uf
-
- UFUi.AskGlobalSelObjectListData - Class in nxopen.uf
-
- UFUi.AskIwDecimalPlacesData - Class in nxopen.uf
-
- UFUi.AskOpenPartFilenameData - Class in nxopen.uf
-
- UFUi.AskSelCursorPosData - Class in nxopen.uf
-
- UFUi.AskSelObjectListData - Class in nxopen.uf
-
- UFUi.AskSelRectanglePosData - Class in nxopen.uf
-
- UFUi.AskStringInputData - Class in nxopen.uf
-
- UFUi.Attachment - Class in nxopen.uf
-
- UFUi.ChainedPoints - Class in nxopen.uf
-
- UFUi.CreateFileboxData - Class in nxopen.uf
-
- UFUi.CreateFileboxWithMultipleFiltersData - Class in nxopen.uf
-
- UFUi.DialogDirId - Class in nxopen.uf
-
- UFUi.DialogFilterId - Class in nxopen.uf
-
- UFUi.FunType - Class in nxopen.uf
-
- UFUi.GetDa1CoordsData - Class in nxopen.uf
-
- UFUi.GetDa2CoordsData - Class in nxopen.uf
-
- UFUi.Mask - Class in nxopen.uf
-
- UFUi.MenuType - Class in nxopen.uf
-
- UFUi.MessageButtons - Class in nxopen.uf
-
- UFUi.MessageDialogType - Class in nxopen.uf
-
- UFUi.PickCsysData - Class in nxopen.uf
-
- UFUi.PointBaseMethod - Class in nxopen.uf
-
- UFUi.PointConstructData - Class in nxopen.uf
-
- UFUi.PointSubfunctionData - Class in nxopen.uf
-
- UFUi.SelectConeheadData - Class in nxopen.uf
-
- UFUi.SelectParametersData - Class in nxopen.uf
-
- UFUi.SelectPointCollectionData - Class in nxopen.uf
-
- UFUi.SelectRoutingObjectsData - Class in nxopen.uf
-
- UFUi.SelectRpoDimensionsData - Class in nxopen.uf
-
- UFUi.SelectSketchDimensionsData - Class in nxopen.uf
-
- UFUi.SelectTcResultFileToImportData - Class in nxopen.uf
-
- UFUi.SpecifyCsysData - Class in nxopen.uf
-
- UFUi.SpecifyPlaneData - Class in nxopen.uf
-
- UFUi.SpecifyVectorData - Class in nxopen.uf
-
- UFUi.UgmgrAskCreatePartFileNameData - Class in nxopen.uf
-
- UFUiOnt - Interface in nxopen.uf
-
Contains wrappers for all 'UFUiOnt' functions and data types.
- UFUiOnt.AskSelectedNodesData - Class in nxopen.uf
-
- UFUiOnt.TreeMode - Class in nxopen.uf
-
- UFUiParam - Interface in nxopen.uf
-
Contains wrappers for all 'UFUiParam' functions and data types.
- UFUN_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- UFUndo - Interface in nxopen.uf
-
Contains wrappers for all 'UFUndo' functions and data types.
- UFUndo.UserVisibility - Class in nxopen.uf
-
- UFUnit - Interface in nxopen.uf
-
Contains wrappers for all 'UFUnit' functions and data types.
- UFVariant - Class in nxopen.uf
-
- UFVariant() - Constructor for class nxopen.uf.UFVariant
-
- UFVariant(long) - Constructor for class nxopen.uf.UFVariant
-
- UFVariant(int) - Constructor for class nxopen.uf.UFVariant
-
- UFVariant(Object) - Constructor for class nxopen.uf.UFVariant
-
- UFVec2 - Interface in nxopen.uf
-
Contains wrappers for all 'UFVec2' functions and data types.
- UFVec2.ComponentsData - Class in nxopen.uf
-
- UFVec2.UnitizeData - Class in nxopen.uf
-
- UFVec3 - Interface in nxopen.uf
-
Contains wrappers for all 'UFVec3' functions and data types.
- UFVec3.UnitizeData - Class in nxopen.uf
-
- UFVec4 - Interface in nxopen.uf
-
Contains wrappers for all 'UFVec4' functions and data types.
- UFView - Interface in nxopen.uf
-
Contains wrappers for all 'UFView' functions and data types.
- UFView.AskPerspectiveData - Class in nxopen.uf
-
- UFView.AskSurfaceDisplayOptionsData - Class in nxopen.uf
-
- UFView.AskTypeData - Class in nxopen.uf
-
- UFView.AskVdeData - Class in nxopen.uf
-
- UFView.AskVdeDataWithTypeData - Class in nxopen.uf
-
- UFView.AskViewDependentStatusData - Class in nxopen.uf
-
- UFView.AskViewsOfViewSetData - Class in nxopen.uf
-
- UFView.AskVisibleObjectsData - Class in nxopen.uf
-
- UFView.AskZClipData - Class in nxopen.uf
-
- UFView.CycleObjects - Class in nxopen.uf
-
- UFView.EdgeDisplayOptions - Class in nxopen.uf
-
- UFView.FogOptions - Class in nxopen.uf
-
- UFView.HiddenEdgeStyle - Class in nxopen.uf
-
- UFView.LightAttributes - Class in nxopen.uf
-
- UFView.LightBeamFallOff - Class in nxopen.uf
-
- UFView.LightDetail - Class in nxopen.uf
-
- UFView.LightEdge - Class in nxopen.uf
-
- UFView.LightFallOff - Class in nxopen.uf
-
- UFView.Lighting - Class in nxopen.uf
-
- UFView.LightIntensityFactor - Class in nxopen.uf
-
- UFView.LightMode - Class in nxopen.uf
-
- UFView.Lights - Class in nxopen.uf
-
- UFView.LightType - Class in nxopen.uf
-
- UFView.ReadViewDrawingParametersData - Class in nxopen.uf
-
- UFView.RenderingStyle - Class in nxopen.uf
-
- UFView.ShadedEdgeOptions - Class in nxopen.uf
-
- UFView.ShadedEdgeStyle - Class in nxopen.uf
-
- UFView.SmoothEdges - Class in nxopen.uf
-
- UFView.StandardOrientation - Class in nxopen.uf
-
- UFView.Subtype - Class in nxopen.uf
-
- UFView.Type - Class in nxopen.uf
-
- UFView.VdeData - Class in nxopen.uf
-
- UFView.VdeDataAndType - Class in nxopen.uf
-
- UFView.VdeType - Class in nxopen.uf
-
- UFView.Visualization - Class in nxopen.uf
-
- UFWave - Interface in nxopen.uf
-
Contains wrappers for all 'UFWave' functions and data types.
- UFWave.AskBrokenLinkSourcePartData - Class in nxopen.uf
-
- UFWave.AskLinkedFeatureMapData - Class in nxopen.uf
-
- UFWave.AskLinkMirrorData - Class in nxopen.uf
-
- UFWave.AskLinkRegionSourcesData - Class in nxopen.uf
-
- UFWave.AskOutOfDateObjectsData - Class in nxopen.uf
-
- UFWave.AskOutOfDatePartsData - Class in nxopen.uf
-
- UFWave.CopyComponentAsData - Class in nxopen.uf
-
- UFWave.CreateLinkedRouteSegmentData - Class in nxopen.uf
-
- UFWave.DelayStatus - Class in nxopen.uf
-
- UFWave.LinkedFeatureInfo - Class in nxopen.uf
-
- UFWave.LoadParentsData - Class in nxopen.uf
-
- UFWeb - Interface in nxopen.uf
-
Contains wrappers for all 'UFWeb' functions and data types.
- UFWeight - Interface in nxopen.uf
-
Contains wrappers for all 'UFWeight' functions and data types.
- UFWeight.AskPartMaxWeightData - Class in nxopen.uf
-
- UFWeight.AskPartMinWeightData - Class in nxopen.uf
-
- UFWeight.EstabCompProps1Data - Class in nxopen.uf
-
- UFWeight.EstabCompPropsData - Class in nxopen.uf
-
- UFWeight.EstabPartProps1Data - Class in nxopen.uf
-
- UFWeight.EstabPartPropsData - Class in nxopen.uf
-
- UFWeight.ExceptionReason - Class in nxopen.uf
-
- UFWeight.Exceptions - Class in nxopen.uf
-
- UFWeight.Properties - Class in nxopen.uf
-
- UFWeight.StateType - Class in nxopen.uf
-
- UFWeight.UnitsType - Class in nxopen.uf
-
- UFWeld - Interface in nxopen.uf
-
Contains wrappers for all 'UFWeld' functions and data types.
- UFWeld.AskBodyIdData - Class in nxopen.uf
-
- UFWeld.AskGrooveOrEdgeGuideData - Class in nxopen.uf
-
- UFWeld.AskGuideCurvesData - Class in nxopen.uf
-
- UFWeld.AskSpotFaceData - Class in nxopen.uf
-
- UFWeld.AskSpotFaceInfoData - Class in nxopen.uf
-
- UFWeld.IsObjectWeldData - Class in nxopen.uf
-
- UFWeld.LocateWelds2Data - Class in nxopen.uf
-
- UFWeld.LocateWeldsData - Class in nxopen.uf
-
- UFWeld.PopulateAttrListData - Class in nxopen.uf
-
- UFWeld.SpotData - Class in nxopen.uf
-
- UFWeld.SpotFaceLoc - Class in nxopen.uf
-
- UFWeld.SpotFaceLocation - Class in nxopen.uf
-
- UFWeld.SpotInfo - Class in nxopen.uf
-
- UFWeld.Types - Class in nxopen.uf
-
- UFXs - Interface in nxopen.uf
-
Contains wrappers for all 'UFXs' functions and data types.
- UG_ROUTE_END_OFFSET_STR - Static variable in class nxopen.uf.UFConstants
-
- UG_ROUTE_INSIDE_PERPENDICULAR_CURVE - Static variable in class nxopen.uf.UFConstants
-
- UG_ROUTE_LENGTH_STR - Static variable in class nxopen.uf.UFConstants
-
- UG_ROUTE_SEGMENT_XFORM_REF_INFO - Static variable in class nxopen.uf.UFConstants
-
- UG_ROUTE_START_OFFSET_STR - Static variable in class nxopen.uf.UFConstants
-
- UG_ROUTE_WIDTH_STR - Static variable in class nxopen.uf.UFConstants
-
- UG_USER_DEFINED - Static variable in class nxopen.uf.UFPd.AttributeType
-
- ugAspectRatio - Variable in class nxopen.uf.UFDraw.TabnotParams
-
- ugBodyTag - Variable in class nxopen.uf.UFPs.Unexported
-
- ugFont - Variable in class nxopen.uf.UFDraw.TabnotCellParams
-
- ugfont() - Method in interface nxopen.UFSession
-
- UghpglCmpOptions() - Constructor for class nxopen.uf.UFPlot.UghpglCmpOptions
-
- UghpglCmpOptions(UFPlot.CmpColorWidth, UFPlot.CreateCmpResultPlot, double) - Constructor for class nxopen.uf.UFPlot.UghpglCmpOptions
-
- ugmgr() - Method in interface nxopen.UFSession
-
- ugmgrAskCreatePartFileName() - Method in interface nxopen.uf.UFUi
-
- UgmgrAskCreatePartFileNameData() - Constructor for class nxopen.uf.UFUi.UgmgrAskCreatePartFileNameData
-
- ugmgrKf() - Method in interface nxopen.UFSession
-
- UGO_BODY_SOURCE - Static variable in class nxopen.uf.UFBrep.TopoSource
-
- UGO_TRIMSURF_SOURCE - Static variable in class nxopen.uf.UFBrep.TopoSource
-
- uGrid - Variable in class nxopen.DisplayModification.NewGridData
-
number of grid lines in the u direction
- UGROOVE - Static variable in class nxopen.weld.WeldGrooveBuilder.Types
-
U Groove
- Ugs2dMeshParms() - Constructor for class nxopen.uf.UFSf.Ugs2dMeshParms
-
- Ugs2dMeshParms(UFSf.Ugs2dMesherElemType, double, int, double, int, double, int, int, int, int, int, int, double, UFSf.UgsMesherMidnodeOption, double, double, int, double, int, double, int, int, int, UFSf.UgsAbstractionFilletTypeOption, int, double, double) - Constructor for class nxopen.uf.UFSf.Ugs2dMeshParms
-
- UGS_ABSTRACTION_FILLET_ALL - Static variable in class nxopen.uf.UFSf.UgsAbstractionFilletTypeOption
-
- UGS_ABSTRACTION_FILLET_INSIDE - Static variable in class nxopen.uf.UFSf.UgsAbstractionFilletTypeOption
-
- UGS_ABSTRACTION_FILLET_OUTSIDE - Static variable in class nxopen.uf.UFSf.UgsAbstractionFilletTypeOption
-
- UGS_MESHER_CURVED_MIDNODES - Static variable in class nxopen.uf.UFSf.UgsMesherMidnodeOption
-
- UGS_MESHER_MIXED_MIDNODES - Static variable in class nxopen.uf.UFSf.UgsMesherMidnodeOption
-
- UGS_MESHER_QUAD4 - Static variable in class nxopen.uf.UFSf.Ugs2dMesherElemType
-
- UGS_MESHER_QUAD8 - Static variable in class nxopen.uf.UFSf.Ugs2dMesherElemType
-
- UGS_MESHER_STRAIGHT_MIDNODES - Static variable in class nxopen.uf.UFSf.UgsMesherMidnodeOption
-
- UGS_MESHER_TRI3 - Static variable in class nxopen.uf.UFSf.Ugs2dMesherElemType
-
- UGS_MESHER_TRI6 - Static variable in class nxopen.uf.UFSf.Ugs2dMesherElemType
-
- UGS_TET_MESH_FILLET_ALL - Static variable in class nxopen.uf.UFSf.UgsTetMeshFilletTypeOption
-
- UGS_TET_MESH_FILLET_INSIDE - Static variable in class nxopen.uf.UFSf.UgsTetMeshFilletTypeOption
-
- UGS_TET_MESH_FILLET_OUTSIDE - Static variable in class nxopen.uf.UFSf.UgsTetMeshFilletTypeOption
-
- UgsMeshAbstractionParams() - Constructor for class nxopen.uf.UFSf.UgsMeshAbstractionParams
-
- UgsMeshAbstractionParams(double, int, double, int, UFSf.UgsAbstractionFilletTypeOption, int, double, double) - Constructor for class nxopen.uf.UFSf.UgsMeshAbstractionParams
-
- UgsTetMeshParms() - Constructor for class nxopen.uf.UFSf.UgsTetMeshParms
-
- UgsTetMeshParms(UFSf.ElementType, int, double, UFSf.UgsMesherMidnodeOption, double, double, int, int, int, int, int, double, int, int, int, int, double, int, UFSf.UgsTetMeshFilletTypeOption, int, double, double) - Constructor for class nxopen.uf.UFSf.UgsTetMeshParms
-
- ugTextHeight - Variable in class nxopen.uf.UFDraw.TabnotCellParams
-
- ui() - Method in interface nxopen.UFSession
-
- UI - Interface in nxopen
-
This class contains the various elements that represent the NX User Interface.
- UI.Status - Class in nxopen
-
Indicates the Lock, Unlock status of NX functions.
- UI.UtilityFunctionVisibilityHandler - Interface in nxopen
-
User defined method is called whenever an NX utility function state changes.
- UIBLOCK - Static variable in class nxopen.blockstyler.PropertyList.PropertyType
-
UIBlock
- UIBlock - Interface in nxopen.blockstyler
-
Represents a UI Block .
- UIBLOCK - Static variable in class nxopen.PropertyContainer.PropertyType
-
UIBlock
- uiOnt() - Method in interface nxopen.UFSession
-
- uiParam() - Method in interface nxopen.UFSession
-
- uloopCurve() - Method in interface nxopen.features.RapidSurfaceBuilder
-
Returns the loop curve(U)
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- ULTIMATE_SAFETY - Static variable in class nxopen.cae.responsesimulation.StrengthStressMaterialDefinitionMethod
-
- ULTIMATE_STRENGTH - Static variable in class nxopen.uf.UFSf.DursolStressCriterion
-
- ULTIMATE_STRESS - Static variable in class nxopen.cae.DurabilityEventStrengthSettingsBuilder.StressCriterionEnum
-
Ultimate Stress
- ULTRA_FINE - Static variable in class nxopen.display.FacetSettingsBuilder.AdvVisToleranceSetting
-
- ULTRA_FINE - Static variable in class nxopen.display.FacetSettingsBuilder.ShadedToleranceSetting
-
- ULTRA_FINE - Static variable in class nxopen.fields.DisplayPropertiesBuilder.DispResolutionEnum
-
- ULTRA_FINE - Static variable in class nxopen.geometricanalysis.HighlightLinesAnalysisBuilder.Resolutions
-
Ultra Fine
- ULTRA_FINE - Static variable in class nxopen.ListCreator.ResolutionType
-
UltraFine
- ULTRA_FINE - Static variable in class nxopen.preferences.PartModeling.GridResolutionType
-
Ultra Fine grid resolution
- ULTRA_FINE - Static variable in class nxopen.preferences.SessionModeling.PreviewResolutionType
-
- ULTRA_FINE - Static variable in class nxopen.preferences.ShadingToleranceOption
-
Ultra Fine
- ULTRAFINE - Static variable in class nxopen.preferences.PartVisualizationShade.AdvViewToleranceType
-
Ultrafine
- ULTRAFINE - Static variable in class nxopen.preferences.PartVisualizationShade.ShadedViewToleranceType
-
For Ultrafine: Facet Edge Tolerance is 0.0005, Facet
Chord Tolerance is 0.0005, and Angular Tolerance is 3
- UMAX_VMAX - Static variable in class nxopen.cam.InspectionMethodBuilder.PointSequenceStartTypes
-
Umax - Vmax
- UMAX_VMAX - Static variable in class nxopen.cam.InspectionUVGridBuilder.StartPointType
-
Umax - Vmax
- UMAX_VMIN - Static variable in class nxopen.cam.InspectionMethodBuilder.PointSequenceStartTypes
-
Umax - Vmin
- UMAX_VMIN - Static variable in class nxopen.cam.InspectionUVGridBuilder.StartPointType
-
Umax - Vmin
- umaxCnstrData - Variable in class nxopen.uf.UFModl.RefitFaceData
-
- umaxConstraint() - Method in interface nxopen.features.PoleSmoothingBuilder
-
Returns the u maximum continuity constraint
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- umaxContinuity() - Method in interface nxopen.features.IFormBuilder
-
Returns the continuity at maximum U direction
License requirements: None.
- umaximum() - Method in interface nxopen.die.QuickBinderBuilder
-
Returns the u maximum extension distance.
- umaximum() - Method in interface nxopen.die.QuickBinderWrapBuilder
-
Returns the maximum U value
License requirements: None.
- UMIN_VMAX - Static variable in class nxopen.cam.InspectionMethodBuilder.PointSequenceStartTypes
-
Umin - Vmax
- UMIN_VMAX - Static variable in class nxopen.cam.InspectionUVGridBuilder.StartPointType
-
Umin - Vmax
- UMIN_VMIN - Static variable in class nxopen.cam.InspectionMethodBuilder.PointSequenceStartTypes
-
Umin - Vmin
- UMIN_VMIN - Static variable in class nxopen.cam.InspectionUVGridBuilder.StartPointType
-
Umin - Vmin
- uminCnstrData - Variable in class nxopen.uf.UFModl.RefitFaceData
-
- uminConstraint() - Method in interface nxopen.features.PoleSmoothingBuilder
-
Returns the u minimum continuity constraint
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- uminContinuity() - Method in interface nxopen.features.IFormBuilder
-
Returns the continuity at minimum U direction
License requirements: None.
- uminimum() - Method in interface nxopen.die.QuickBinderBuilder
-
Returns the u minimum extension distance.
- uminimum() - Method in interface nxopen.die.QuickBinderWrapBuilder
-
Returns the minumum U value
License requirements: None.
- UN_SAVED - Static variable in class nxopen.assemblies.Order.State
-
Order is unsaved
- UNABLE_CREATE_SNAPSHOT - Static variable in class nxopen.uf.UFConstants
-
- UNABLE_TO_BOOLEAN - Static variable in class nxopen.uf.UFConstants
-
- UNABLE_TO_COMBINE_CURVES - Static variable in class nxopen.uf.UFConstants
-
- UNABLE_TO_CONSTRUCT_BRIDGE - Static variable in class nxopen.uf.UFConstants
-
- UNABLE_TO_CONSTRUCT_JOIN_BSURF - Static variable in class nxopen.uf.UFConstants
-
- UNABLE_TO_CONVERT_FACE_TO_BSURF - Static variable in class nxopen.uf.UFConstants
-
- UNABLE_TO_CREATE_BSURF - Static variable in class nxopen.uf.UFConstants
-
- UNABLE_TO_CREATE_DRIVE_SURF - Static variable in class nxopen.uf.UFConstants
-
- UNABLE_TO_CREATE_EDGES - Static variable in class nxopen.uf.UFConstants
-
- UNABLE_TO_CREATE_ISOCRV - Static variable in class nxopen.uf.UFConstants
-
- UNABLE_TO_CREATE_SHEET - Static variable in class nxopen.uf.UFConstants
-
- UNABLE_TO_CREATE_SPLINE - Static variable in class nxopen.uf.UFConstants
-
- UNABLE_TO_CREATE_SURFACE - Static variable in class nxopen.uf.UFConstants
-
- UNABLE_TO_DIVIDE - Static variable in class nxopen.uf.UFConstants
-
- UNABLE_TO_ENLARGE - Static variable in class nxopen.uf.UFConstants
-
- UNABLE_TO_FACET - Static variable in class nxopen.uf.UFConstants
-
- UNABLE_TO_GEN_ISOCLCRV - Static variable in class nxopen.uf.UFConstants
-
- UNABLE_TO_MATCH_FACES - Static variable in class nxopen.uf.UFConstants
-
- UNABLE_TO_OBTAIN_LICENSE - Static variable in class nxopen.RuleManager.InitializationStatusType
-
Cannot obtain license
- UNABLE_TO_PATCH - Static variable in class nxopen.uf.UFConstants
-
- UNABLE_TO_PROJECT - Static variable in class nxopen.uf.UFConstants
-
- UNABLE_TO_REVERSE_NORMAL - Static variable in class nxopen.uf.UFConstants
-
- UNABLE_TO_SEW - Static variable in class nxopen.uf.UFConstants
-
- UNABLE_TO_SEW_SINGLE - Static variable in class nxopen.uf.UFConstants
-
- UNABLE_TO_THICKEN_SHEET - Static variable in class nxopen.uf.UFConstants
-
- UNABLE_TO_TRIM - Static variable in class nxopen.uf.UFConstants
-
- UNABLE_TO_UPDATE - Static variable in class nxopen.cam.BlankIpw.StatusTypes
-
blank ipw status unable to update
- UNABLE_TO_VARI_OFFSET - Static variable in class nxopen.uf.UFConstants
-
- unableToMergeNodesColor - Variable in class nxopen.cae.modelcheck.DuplicateNodesCheckBuilder.DisplaySettings
-
- UNALIGNED - Static variable in class nxopen.features.MeshTransformerBuilder.MeshTopologyType
-
Unaligned
- unapplyDefaults(UFClone.NamingFailures) - Method in interface nxopen.uf.UFClone
-
- unapproveObjects(CAMObject[]) - Method in interface nxopen.cam.CAMSetup
-
Unapprove objects
License requirements: cam_base ("CAM BASE")
.
- unassignAllObjects() - Method in interface nxopen.PhysicalMaterial
-
Removes the material assignment from all the objects that has it currently assigned
License requirements: None.
- unassignConnector() - Method in interface nxopen.routing.electrical.ConnectorDevice
-
Unassign connector.
- unattachedNodesInBoundingBoxRatio() - Method in interface nxopen.cae.ModelDisplayBuilder
-
Returns the include unattached nodes in fit switch
License requirements: nx_masterfem ("Finite Element Modeling")
.
- UNAVAILABLE - Static variable in class nxopen.RuleManager.InitializationStatusType
-
Intent not available
- Unbend - Interface in nxopen.features
-
Represents a Unbend feature
To create or edit an instance of this class, use
UnbendBuilder
Created in NX5.0.0
- UNBEND - Static variable in class nxopen.tooling.BendOperationBuilder.Types
-
unbend operation
- UNBEND - Static variable in class nxopen.tooling.DirectUnbendBuilder.Bendtypes
-
unbend operation
- UnbendBuilder - Interface in nxopen.features.sheetmetal
-
The Unbend feature class.
- UnbendData() - Constructor for class nxopen.uf.UFNxsm.UnbendData
-
- UnbendData(Tag, Tag, int, Tag[]) - Constructor for class nxopen.uf.UFNxsm.UnbendData
-
- unbendList - Variable in class nxopen.uf.UFNxsm.RebendData
-
- unblank() - Method in interface nxopen.DisplayableObject
-
Unblanks the object.
- UNBLANK - Static variable in class nxopen.routing.DesignRuleViolation.BlankOption
-
- unblankObjects(DisplayableObject[]) - Method in interface nxopen.DisplayManager
-
Unblank a set of displayable objects.
- unblankStocks() - Method in interface nxopen.routing.SplinePathBuilder
-
Unblanks stocks which were blanked by calling BlankStockAndGetLargestDia
License requirements: routing_base ("Routing Basic")
.
- UNBOUNDED - Static variable in class nxopen.cam.CamInspectionOperationExtenttypes
-
Feature extent is infinite
- UNBOUNDED - Static variable in class nxopen.cam.InspectionMeasDataBuilder.BoundingType
-
- UNCHECK - Static variable in class nxopen.blockstyler.Wizard.SubNodeAction
-
Sub-node has been unchecked if a checkbox was specified.
- UNCHECKED - Static variable in class nxopen.features.shipdesign.ManufacturingStockBuilder.CheckBoxStatus
-
Unchecked
- uncheckedoutobjects - Variable in class nxopen.assemblies.ComponentAssembly.CheckedoutStatusOfObjectsData
-
Array of NXObjects which are open in session but not checkout
- unclockInstance(Tag) - Method in interface nxopen.uf.UFModlGeneral
-
- unclockIset(Tag) - Method in interface nxopen.uf.UFModlGeneral
-
- UNCLOSED - Static variable in class nxopen.annotations.LineWeldBuilder.WeldSymbolWeldAlongContourType
-
- uncondemnLayoutViewEntities() - Method in interface nxopen.routing.electrical.CablewaysLayoutView
-
Uncondemns the layout view entities.
- UNCUT_GEOM_COLOR - Static variable in class nxopen.uf.UFCamPref.CamPref
-
- UNCUT_VALLEY - Static variable in class nxopen.cam.SurfaceContourBuilder.CleanupTypes
-
- uncutbody - Variable in class nxopen.CutViewCollection.IsCutBodyOfViewData
-
Corresponding Uncut body
- uncutGeomColor - Variable in class nxopen.uf.UFCam.Preferences
-
- uncutRegionColor() - Method in interface nxopen.cam.Preferences
-
Returns the uncut region color
License requirements: None.
- UncutRegionsBuilder - Interface in nxopen.die
-
Calculates the uncut regions of a curve given a radius value for the cut tool.
- UncutRegionsBuilder.ResultsType - Class in nxopen.die
-
Indicates which side of curve to check
- UNDEF - Static variable in class nxopen.cam.SurfaceContourBuilder.DriveMethodTypes
-
Undefined
- UNDEFINED - Static variable in class nxopen.assemblies.DesignElementBuilder.OperationType
-
- UNDEFINED - Static variable in class nxopen.blockstyler.PropertyList.PropertyType
-
Undefined
- UNDEFINED - Static variable in class nxopen.cae.ElementTypes.Order
-
Undefined
- UNDEFINED - Static variable in class nxopen.cae.ElementTypes.Shape
-
Undefined
- UNDEFINED - Static variable in class nxopen.cam.FollowPartMoveBuilder.MoveDirectionTypes
-
- UNDEFINED - Static variable in class nxopen.cam.Tool.Subtypes
-
- UNDEFINED - Static variable in class nxopen.DatumConstraint.Solution
-
- UNDEFINED - Static variable in class nxopen.DatumConstraint.Type
-
- UNDEFINED - Static variable in class nxopen.drawings.DetailViewBuilder.Types
-
For initial values
- UNDEFINED - Static variable in class nxopen.Edge.EdgeType
-
Undefined
- UNDEFINED - Static variable in class nxopen.Face.FaceType
-
Undefined face type
- UNDEFINED - Static variable in class nxopen.facet.FacetedBody.FacetedbodyType
-
Undefined body type
- UNDEFINED - Static variable in class nxopen.facet.FacetedEdge.FacetededgeType
-
- UNDEFINED - Static variable in class nxopen.facet.FacetedFace.FacetedfaceType
-
Undefined body type
- UNDEFINED - Static variable in class nxopen.features.DatumAxisBuilder.AlternateSolution
-
Not defined
- UNDEFINED - Static variable in class nxopen.features.DatumAxisBuilder.ConstraintType
-
Not defined
- UNDEFINED - Static variable in class nxopen.features.DatumPlaneBuilder.ConstraintType
-
Not defined
- UNDEFINED - Static variable in class nxopen.features.MatchedReferenceBuilder.Types
-
default type for feature name lable
- UNDEFINED - Static variable in class nxopen.fields.FieldEvaluator.ValuesOutsideTableInterpolationEnum
-
No interpolation result
- UNDEFINED - Static variable in class nxopen.geometricutilities.ParentEquivalencyMap.Type
-
undefined
- UNDEFINED - Static variable in class nxopen.MaterialUtilities.StressStrainData
-
Undefined type - data is assumed to be defined using the type used by the solver,
no attempt will be made to convert the data to the type the solver requires
- UNDEFINED - Static variable in class nxopen.motion.DriverOperation.Type
-
Undefined
- UNDEFINED - Static variable in class nxopen.motion.Marker.MarkerType
-
- UNDEFINED - Static variable in class nxopen.motion.MotionEnvironment.JointWizardStatus
-
Undefined status
- UNDEFINED - Static variable in class nxopen.motion.SignalChartListItem.Timer
-
Undefined, undefined timer for the sensor signal
- UNDEFINED - Static variable in class nxopen.partfamily.FamilyAttribute.AttrType
-
undefined attribute type
- UNDEFINED - Static variable in class nxopen.PlaneTypes.MethodType
-
Not defined
- UNDEFINED - Static variable in class nxopen.positioning.Constraint.Type
-
No type
- UNDEFINED - Static variable in class nxopen.PrintPDFBuilder.RelationOption
-
This option is not defined
- UNDEFINED - Static variable in class nxopen.PropertyContainer.PropertyType
-
Undefined
- UNDEFINED - Static variable in class nxopen.routing.SplinePathBuilder.SplinePathSlackType
-
The spline is undefined.
- UNDEFINED - Static variable in class nxopen.uf.UFSf.ElementType
-
- UNDEFINED_MARKER - Static variable in class nxopen.uf.UFMotion.MarkerType
-
- undefValueColor() - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
Returns the undef value color
License requirements: None.
- undelayObjectUpdate(NXObject) - Method in interface nxopen.Update
-
Undelay an Object
License requirements: None.
- UNDER_CONSTRAINED - Static variable in class nxopen.Sketch.Status
-
More constraints are needed to fully constrain the sketch
- UNDER_CONSTRAINED - Static variable in class nxopen.uf.UFSket.Status
-
- UNDER_DEFINED - Static variable in class nxopen.positioning.Network.ObjectStatus
-
The constraint is solved and satisfied
- UNDER_MINIMUM_WEIGHT - Static variable in class nxopen.uf.UFWeight.ExceptionReason
-
- UNDERCUT - Static variable in class nxopen.tooling.ElectrodeBlankBuilder.BlankShape
-
the shape of the blank is block to spark undercut area
- undercutsChecker() - Method in interface nxopen.features.AnalyzePocketBuilder
-
Returns the flag specifying whether to check undercuts.
- undercutTolerance() - Method in interface nxopen.cae.optimization.TBSShapeLinkCondition
-
Returns the undercut tolerance in the demolding area
License requirements: None.
- underflow - Variable in class nxopen.cae.Post.Colorbar
-
- UNDERLINE - Static variable in class nxopen.annotations.IdSymbolBuilder.SymbolTypes
-
Underline
- UNDERLINE - Static variable in class nxopen.annotations.PartsListBuilder.PartsListSymbolType
-
- UNDERSIDE - Static variable in class nxopen.cam.TurningToolBuilder.InsertPositions
-
Underside
- UndersizeCollection - Interface in nxopen.tooling
-
Creates a undersize builder
To obtain an instance of this class, refer to
ToolingManager
Created in NX6.0.0
- undersizes() - Method in interface nxopen.tooling.ToolingManager
-
Returns the UndersizeCollection instance belonging to this part .
- undisplayDieData() - Method in interface nxopen.die.Tip
-
Makes the product data in die position invisible.
- undo() - Method in interface nxopen.UFSession
-
- UNDO - Static variable in class nxopen.Update.FailureOption
-
Perform undo
- undoButton() - Method in interface nxopen.tooling.ObjectAttributeManagementBuilder
-
The action to undo last delete
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- undoLastDimension() - Method in interface nxopen.features.RPOBuilder
-
Undo the last positioning dimension
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING")
.
- undoLastNVisibleMarks(int) - Method in interface nxopen.Session
-
Undo to a specified number of visible marks starting with the most
recently created visible mark.
- UndoLastNVisibleMarksData() - Constructor for class nxopen.Session.UndoLastNVisibleMarksData
-
- UndoMarkData() - Constructor for class nxopen.Session.UndoMarkData
-
- UndoMarkData(int, Session.MarkVisibility) - Constructor for class nxopen.Session.UndoMarkData
-
Constructor for the UndoMarkData object.
- undoToLastMark(UFUndo.UserVisibility) - Method in interface nxopen.uf.UFUndo
-
- undoToLastVisibleMark() - Method in interface nxopen.Session
-
Undo to last visible mark.
- undoToMark(int, String) - Method in interface nxopen.Session
-
Undo to the specified mark
License requirements: None.
- undoToMark(int, String) - Method in interface nxopen.uf.UFUndo
-
- undoToMarkWithStatus(int, String) - Method in interface nxopen.Session
-
Undo to the specified mark and output status to status bar.
- undoToNextVisMark() - Method in interface nxopen.uf.UFUndo
-
- undoToPrevMark(UFUndo.UserVisibility, int) - Method in interface nxopen.uf.UFUndo
-
- undoUnavailable - Variable in class nxopen.Session.UndoLastNVisibleMarksData
-
True if not all requested marks were undone and the application has locked the undo system.
- UNEQUAL_CONSTRAINTS - Static variable in class nxopen.routing.Run.FlipStatus
-
Each ports has different number of constraints.
- UNEVEN - Static variable in class nxopen.cae.AfuData.AbscissaType
-
The abscissa value is uneven and input by user
- UNEVEN - Static variable in class nxopen.cae.Post.Abcissa
-
- UNEVEN - Static variable in class nxopen.cae.responsesimulation.RSEvent.SpacingType
-
- unexpandWork() - Method in interface nxopen.ViewCollection
-
Removes the work view from the expand state (assuming that it is
in that state), restoring it to its normal size in its layout.
- unexpandWorkView() - Method in interface nxopen.uf.UFView
-
- unexplodeComponent(Tag, Tag) - Method in interface nxopen.uf.UFAssem
-
- UNEXPLODED - Static variable in class nxopen.uf.UFAssem.ExplStatus
-
- Unexported() - Constructor for class nxopen.uf.UFPs.Unexported
-
- Unexported(Tag, int) - Constructor for class nxopen.uf.UFPs.Unexported
-
- UNFILLED_DATUM_ARROW - Static variable in class nxopen.annotations.ArrowheadType
-
- UNFOLDED_SXLINE - Static variable in class nxopen.uf.UFDraw.SxlineType
-
- UnfoldedMinRecBuilder - Interface in nxopen.features.shipdesign
-
Represents the class Features.ShipDesign.UnfoldedMinRecBuilder which is used to
calculate the unfolded minimum rectangle of ship basic design plates or standard parts.
- UnfoldingSimulationBuilder - Interface in nxopen.tooling
-
Unfolding Simulation Builder of PDW and EDW.
- unfoldModeType() - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
Returns the onestep unfold mode.
- unfoldSolid() - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
Returns the solid body to unform.
- unfoldSolidRegion() - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
Returns the unfold solid regions which are a group of faces user chooses to unform.
- unfoldType() - Method in interface nxopen.tooling.DirectUnfoldBuilder
-
Returns the type of direct unfold, the name get_type has been used
License requirements: None.
- UNFORM - Static variable in class nxopen.tooling.BlankGeneratorBuilder.CreateBlankType
-
Unform blank
- UNFORMED_STATE - Static variable in class nxopen.uf.UFModl.State
-
- unformFaceCollector() - Method in interface nxopen.features.sheetmetal.AeroReformBuilder
-
Returns the unformed faces smart collector object.
- unformFeatures(int, Tag[]) - Method in interface nxopen.uf.UFModlSmd
-
- unformNeutralFactor() - Method in interface nxopen.tooling.UniversalUnformBuilder
-
- unformRegion() - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
Returns the unform region which is a group of faces user chooses to unform.
- unformSection() - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
Returns the unform section which includes a group of user selected points or curves.
- unformSheet() - Method in interface nxopen.tooling.BlankGeneratorBuilder
-
Create a blank by unforming a sheet metal part.
- unfreeze(int, Tag[]) - Method in interface nxopen.uf.UFWave
-
- ungroup(PositioningGroup) - Method in interface nxopen.assemblies.PositioningTask
-
Ungroups the positioning group.
- ungroup(SearchTerm[]) - Method in interface nxopen.assemblies.SubsetRecipe
-
Any
GroupSearchTerm
s in the input search terms will be removed
from the recipe.
- unhighlight() - Method in interface nxopen.DisplayableObject
-
Unhighlights the object.
- unhighlightAllResults() - Method in interface nxopen.geometricanalysis.ExamineGeometry
-
Unhighlight all results
License requirements: None.
- UNHIGHLIGHTED - Static variable in class nxopen.uf.UFDraw.SxsegHighlight
-
- unhighlightResult(ExamineGeometry.Check) - Method in interface nxopen.geometricanalysis.ExamineGeometry
-
Unhighlight results of a specified type of check
License requirements: None.
- unhighlightView() - Method in interface nxopen.routing.electrical.CablewaysLayoutView
-
Unhighlights the layout view.
- UNI_AXIAL - Static variable in class nxopen.cae.DurabilityStressAxesBuilder.ElementFaceStressAxisEnum
-
UniAxial
- UNI_AXIAL - Static variable in class nxopen.cae.responsesimulation.StrainGageType
-
- UNICODE - Static variable in class nxopen.preferences.SessionUserInterface.JournalFileFormatType
-
Unicode
- UNICODE_BIG_ENDIAN - Static variable in class nxopen.preferences.SessionUserInterface.JournalFileFormatType
-
Unicode Big Endian
- UNIDIRECTIONAL - Static variable in class nxopen.cae.LaminateDrapingDataBuilder.SolverType
-
unidirectional solver
- UNIFIED - Static variable in class nxopen.cam.DrillThreadMillToolBuilder.ToolFormTypeTypes
-
Unified
- UNIFIED - Static variable in class nxopen.cam.fbm.ThreadFeatureGeometry.Form
-
Form: Unified
- UNIFIED - Static variable in class nxopen.cam.HoleBossGeom.FormTypes
-
Form: Unified
- UNIFORM - Static variable in class nxopen.cae.MeshFromBoundaryBuilder.RailOption
-
single layer
- UNIFORM - Static variable in class nxopen.features.IFormBuilder.InsertionMethodOptions
-
Insert curves uniformly
- UNIFORM - Static variable in class nxopen.features.IsoparametricCurvesBuilder.PlacementTypes
-
Insert curves uniformly
- UNIFORM - Static variable in class nxopen.features.ScaleBuilder.Types
-
Uniform scaling
- UNIFORM - Static variable in class nxopen.features.StyledSweepBuilder.ScalingMethodOptions
-
Uniform
- UNIFORM - Static variable in class nxopen.features.subdivision.SubdivisionSplitFaceBuilder.Types
-
Uniform split type.
- UNIFORM - Static variable in class nxopen.features.subdivision.TransformCageData.ScalingMethodType
-
Scale uniformly all the directions
- UNIFORM - Static variable in class nxopen.geometricanalysis.HighlightLinesAnalysisBuilder.LightPlacements
-
Uniform: Lights are placed uniformly on light plane
- UNIFORM - Static variable in class nxopen.geometricanalysis.HighlightLinesAnalysisBuilder.Types
-
Deprecated.
Uniform: Lights are placed uniformly on light plane
- UNIFORM - Static variable in class nxopen.geometricanalysis.sectionanalysis.SectionAnalysisExBuilder.PlacementType
-
Uniformly distributed
- UNIFORM - Static variable in class nxopen.geometricutilities.CurveShapingBuilder.InsertionMethodOptions
-
Insert points uniformly
- UNIFORM - Static variable in class nxopen.geometricutilities.ScalingMethodBuilder.ScalingOptions
-
Uniform, available only if 2 guides are selected
- UNIFORM - Static variable in class nxopen.optimization.DesignStudyBuilder.DesignStudyDistributeType
-
Uniform distribution type
- UNIFORM - Static variable in class nxopen.tooling.MWMoldedPartValidationBuilder.RangeType
-
uniform range limit values
- UNIFORM - Static variable in class nxopen.tooling.WallThicknessCheckerBuilder.RangeType
-
Uniform
- UNIFORM_ACROSS_EDGE - Static variable in class nxopen.cae.ManualMorphBuilder.MapMethod
-
- UNIFORM_MEMBRANE_EXPANSION - Static variable in class nxopen.tooling.DieEngStampingOutputBuilder.SpringbackMethodType
-
- UNIFORM_SCALE - Static variable in class nxopen.SketchConstraintBuilder.Constraint
-
- UNIFORM_SCALED - Static variable in class nxopen.Sketch.ConstraintType
-
- UNIFORM_SCALED - Static variable in class nxopen.uf.UFSket.ConType
-
- UNIFORM_VALUE - Static variable in class nxopen.routing.ModelTerminalsBuilder.CutBackLocationOption
-
UniformValue
- UNIFORM_VALUE - Static variable in class nxopen.routing.ModelTerminalsBuilder.ExtensionValueOption
-
UniformValue
- uniformFactor() - Method in interface nxopen.features.ScaleBuilder
-
Returns the uniform factor
License requirements: None.
- uniformLoadBendingStressMaximum(double, double, double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the maximum bending stress under a uniform Load.
- uniformLoadDisplacement(double, double, double, double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the displacement under a uniform Load.
- uniformLoadDisplacementMaximum(double, double, double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the maximum displacement under a uniform Load.
- uniformLoadMoment(double, double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the moment under a uniform Load.
- uniformLoadMomentMaximum(double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the maximum moment under a uniform Load.
- uniformLoadShearForce(double, double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the shear force under a uniform Load.
- uniformLoadShearForceMaximum(double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the maximum shear force under a uniform Load.
- uniformLoadSlope(double, double, double, double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the slope under a uniform Load.
- uniformLoadSlopeMaximum(double, double, double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the maximum slope under a uniform Load.
- uniformSpacingTolerance() - Method in interface nxopen.weld.AutoPointBuilder
-
Returns the distance that maximum spacing can be exceeded to achieve uniform spacing
License requirements: None.
- UNIFY_PATH - Static variable in class nxopen.routing.DesignRuleViolationCollection.Reason
-
- unifyMaterialSide(int) - Method in interface nxopen.cam.Topology
-
The action of unify material side of one connected shell
License requirements: cam_base ("CAM BASE")
.
- unifyPath() - Method in interface nxopen.routing.DefineRunBuilder
-
UnifyPath of the run.
- unifyPath(TaggedObject, CharacteristicList) - Method in interface nxopen.routing.RouteManager
-
Changes the given stock or component to a new object that matches the given characteristics.
- UnifyPathBuilder - Interface in nxopen.routing
-
Builder to unify Routing.Stock
and Assemblies.Component
based on specified characteristic values.
- UNILATERAL_ABOVE - Static variable in class nxopen.annotations.ToleranceType
-
+TOL
-.000
- UNILATERAL_ABOVE - Static variable in class nxopen.uf.UFDrf.ToleranceType
-
- UNILATERAL_BELOW - Static variable in class nxopen.annotations.ToleranceType
-
+.000
-TOL
- UNILATERAL_BELOW - Static variable in class nxopen.uf.UFDrf.ToleranceType
-
- UNILATERAL_MINUS - Static variable in class nxopen.annotations.BaseSurfaceFinishBuilder.ToleranceOption
-
Unilateral minus
- UNILATERAL_MINUS - Static variable in class nxopen.annotations.SearchCriteriaDimensionBuilder.ToleranceTypes
-
UnilateralMinus
- UNILATERAL_MINUS - Static variable in class nxopen.annotations.SearchCriteriaSurfaceFinishBuilder.ToleranceTypeOptions
-
unilateral -
- UNILATERAL_MINUS - Static variable in class nxopen.tooling.AutoDimensionBuilder.ToleranceType
-
- UNILATERAL_PLUS - Static variable in class nxopen.annotations.BaseSurfaceFinishBuilder.ToleranceOption
-
Unilateral plus
- UNILATERAL_PLUS - Static variable in class nxopen.annotations.SearchCriteriaDimensionBuilder.ToleranceTypes
-
UnilateralPlus
- UNILATERAL_PLUS - Static variable in class nxopen.annotations.SearchCriteriaSurfaceFinishBuilder.ToleranceTypeOptions
-
unilateral +
- UNILATERAL_PLUS - Static variable in class nxopen.tooling.AutoDimensionBuilder.ToleranceType
-
- UNINITIALIZED - Static variable in class nxopen.Section.AllowTypes
-
This is uninitialized state.
- UNIQUE - Static variable in class nxopen.uf.UFGdt.IndexDisplayType
-
- uniqueIdentifier() - Method in interface nxopen.BasePart
-
Returns the unique identifier for this part used to determine whether parts can be quietly substituted during part open.
- uniqueMembership() - Method in interface nxopen.ObjectGeneralPropertiesBuilder
-
Returns the unique membership.
- unit() - Method in interface nxopen.annotations.ImportAutocadBlockBuilder
-
Returns the symbol part unit
License requirements: nx_layout ("NX Layout")
.
- unit() - Method in interface nxopen.cae.AfuZHeaderInfo
-
Returns the unit type of Z axis
License requirements: nx_ftk ("NX Advanced Graphing")
.
- unit() - Method in interface nxopen.cae.BaseIteration
-
Returns the units for the iteration value
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- unit - Variable in class nxopen.cae.modelcheck.ITestValue.CriteriaValueData
-
- unit - Variable in class nxopen.cae.Result.ResultParameters
-
Deprecated.
- unit() - Method in interface nxopen.cae.ResultProbeBuilder
-
Returns the unit
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- unit - Variable in class nxopen.cam.CAMObject.FeedRateData
-
the feed rate unit
- unit - Variable in class nxopen.cam.FeedStatusData
-
feed rate unit
- unit() - Method in interface nxopen.cam.InheritableFeedBuilder
-
Returns the current value
License requirements: None.
- unit() - Method in interface nxopen.cam.ReliefPlunge
-
Returns the relief plunge unit
License requirements: None.
- UNIT - Static variable in class nxopen.EffectivityConditionBuilder.EffectivityConditionType
-
Discrete unit value
- unit - Variable in class nxopen.mechatronics.ParameterStockBuilder.RealParameterData
-
- unit - Variable in class nxopen.mechatronics.SignalAdapterBuilder.SignalData
-
Data Unit
- unit - Variable in class nxopen.NXObject.AttributeInformation
-
The display units, if any, if the attribute is a real-type attribute
- unit - Variable in class nxopen.RuleManager.DebugRule
-
unit of rule
- unit() - Method in interface nxopen.tooling.InitProjectBuilder
-
Returns the project unit access functions
License requirements: None.
- unit - Variable in class nxopen.uf.UFEval.Line
-
- unit() - Method in interface nxopen.UFSession
-
- Unit - Interface in nxopen
-
Represents a unit
To obtain an instance of this class use
UnitCollection
Created in NX4.0.0
- UNIT_AREA_LENGTH - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.ParamExtent
-
Unit Area Length
- UNIT_BASIS_AREA - Static variable in class nxopen.uf.UFGdt.ModifierTypes
-
- UNIT_BASIS_LENGTH - Static variable in class nxopen.uf.UFGdt.ModifierTypes
-
- UNIT_DEG_PER_MIN - Static variable in class nxopen.uf.UFSim.UnitType
-
- UNIT_DEG_PER_SEC - Static variable in class nxopen.uf.UFSim.UnitType
-
- UNIT_FEET - Static variable in class nxopen.uf.UFSim.UnitType
-
- UNIT_FEET_PER_MIN - Static variable in class nxopen.uf.UFSim.UnitType
-
- UNIT_INCH - Static variable in class nxopen.uf.UFSim.UnitType
-
- UNIT_INCH_PER_MIN - Static variable in class nxopen.uf.UFSim.UnitType
-
- UNIT_INCH_PER_REV - Static variable in class nxopen.uf.UFSim.UnitType
-
- UNIT_INCH_PER_SEC - Static variable in class nxopen.uf.UFSim.UnitType
-
- UNIT_M - Static variable in class nxopen.uf.UFSim.UnitType
-
- UNIT_MIN - Static variable in class nxopen.uf.UFSim.UnitType
-
- UNIT_MM - Static variable in class nxopen.uf.UFSim.UnitType
-
- UNIT_MM_PER100REV - Static variable in class nxopen.uf.UFSim.UnitType
-
- UNIT_MM_PER_MIN - Static variable in class nxopen.uf.UFSim.UnitType
-
- UNIT_MM_PER_REV - Static variable in class nxopen.uf.UFSim.UnitType
-
- UNIT_MM_PER_SEC - Static variable in class nxopen.uf.UFSim.UnitType
-
- UNIT_MPER_MIN - Static variable in class nxopen.uf.UFSim.UnitType
-
- UNIT_MPER_SEC_POW2 - Static variable in class nxopen.uf.UFSim.UnitType
-
- UNIT_NONE - Static variable in class nxopen.uf.UFSim.UnitType
-
- UNIT_RAD_PER_MIN - Static variable in class nxopen.uf.UFSim.UnitType
-
- UNIT_RAD_PER_SEC - Static variable in class nxopen.uf.UFSim.UnitType
-
- UNIT_RANGE - Static variable in class nxopen.EffectivityConditionBuilder.EffectivityConditionType
-
Range unit values
- UNIT_REV_PER_MIN - Static variable in class nxopen.uf.UFSim.UnitType
-
- UNIT_REV_PER_SEC - Static variable in class nxopen.uf.UFSim.UnitType
-
- UNIT_SEC - Static variable in class nxopen.uf.UFSim.UnitType
-
- UNIT_SFM - Static variable in class nxopen.uf.UFSim.UnitType
-
- UNIT_SMM - Static variable in class nxopen.uf.UFSim.UnitType
-
- UNIT_SUBASSY - Static variable in class nxopen.assemblies.ClearanceAnalysisBuilder.PairExcludedReason
-
in unit subassembly
- unitArcLengthParameter - Variable in class nxopen.geometricanalysis.GeometricProperties.CaeCurve
-
UnitArcLength parametrization
- unitBasis() - Method in interface nxopen.annotations.FeatureControlFrameDataBuilder
-
Returns the unit basis toggle
Only available when feature control frame characteristic is
Annotations.FeatureControlFrameBuilder.FcfCharacteristic#STRAIGHTNESS
Annotations.FeatureControlFrameBuilder.FcfCharacteristic#FLATNESS
Annotations.FeatureControlFrameBuilder.FcfCharacteristic#PROFILE_OF_ALINE
Annotations.FeatureControlFrameBuilder.FcfCharacteristic#PROFILE_OF_ASURFACE
License requirements: None.
- UnitBasis() - Constructor for class nxopen.uf.UFGdt.UnitBasis
-
- UnitBasis(Tag, Tag, Tag, int, int) - Constructor for class nxopen.uf.UFGdt.UnitBasis
-
- unitBasisValue1() - Method in interface nxopen.annotations.FeatureControlFrameDataBuilder
-
Returns the unit basis value1
Only available when
Annotations.FeatureControlFrameDataBuilder#unitBasis
is true.
- unitBasisValue2() - Method in interface nxopen.annotations.FeatureControlFrameDataBuilder
-
Returns the unit basis value2
Only available when
Annotations.FeatureControlFrameDataBuilder#unitBasis
is true.
- unitCollection() - Method in interface nxopen.BasePart
-
Returns a collection of Units .
- UnitCollection - Interface in nxopen
-
Provides methods for manipulating the units in a part
To obtain an instance of this class, refer to
BasePart
Created in NX4.0.0
- UNITE - Static variable in class nxopen.die.DieBooleanBuilder.BooleanType
-
Unite the solids to the application solid.
- Unite - Interface in nxopen.features
-
- UNITE - Static variable in class nxopen.geometricutilities.BooleanOperation.BooleanType
-
Unite
- UNITE - Static variable in class nxopen.sim.KinematicConfigurator.UniteTypes
-
Unite the spinning geometries into one body
- UNITE - Static variable in class nxopen.uf.UFModl.FeatureSigns
-
- UNITE_SINGLE_WORKPIECES - Static variable in class nxopen.tooling.MoldInsertBuilder.BooleanType
-
unite single
- uniteBodies() - Method in interface nxopen.tooling.ElectrodeBlankBuilder
-
Returns the option to unite head bodies, the extension and the blank or not.
- uniteBodies(Tag, Tag) - Method in interface nxopen.uf.UFModeling
-
- uniteBodiesWithRetainedOptions(Tag, Tag, boolean, boolean) - Method in interface nxopen.uf.UFModeling
-
- unitEffectivityValue() - Method in interface nxopen.BasicEffectivityBuilder
-
Returns the unit effectivity value
License requirements: None.
- unitize(double[], double) - Method in interface nxopen.uf.UFVec2
-
- unitize(double[], double) - Method in interface nxopen.uf.UFVec3
-
- UnitizeData() - Constructor for class nxopen.uf.UFVec2.UnitizeData
-
- UnitizeData() - Constructor for class nxopen.uf.UFVec3.UnitizeData
-
- unitLabel() - Method in interface nxopen.cae.AfuAbscissaHeaderInfo
-
Returns the customized unit label
License requirements: nx_ftk ("NX Advanced Graphing")
.
- unitLabel() - Method in interface nxopen.cae.AfuOrdinateHeaderInfo
-
Returns the customized unit label
License requirements: nx_ftk ("NX Advanced Graphing")
.
- UNITLESS_INTEGER - Static variable in class nxopen.cae.XyFunctionMeasure
-
Unitless integer unit
- UNITLESS_INTEGER_NONE - Static variable in class nxopen.cae.XyFunctionUnit
-
Unitless Integer unit: none
- UNITLESS_REAL - Static variable in class nxopen.cae.XyFunctionMeasure
-
Unitless real unit
- UNITLESS_REAL_NONE - Static variable in class nxopen.cae.XyFunctionUnit
-
Unitless Real unit: none
- UNITLESS_SCALAR - Static variable in class nxopen.cae.XyFunctionMeasure
-
Unitless scalar unit
- UNITLESS_SCALAR_NONE - Static variable in class nxopen.cae.XyFunctionUnit
-
Unitless Scalar unit: none
- unitNorm - Variable in class nxopen.uf.UFModeling.AskFacePropsData
-
- units - Variable in class nxopen.assemblies.ComponentAssembly.RealQuantityData
-
Units
- units() - Method in interface nxopen.AttributePropertiesBaseBuilder
-
Returns the units associated with an attribute of type Number.
- units() - Method in interface nxopen.AttributeTemplatesBuilder
-
Returns the units.
- units() - Method in interface nxopen.blockstyler.AngularDimension
-
Returns the Units
License requirements: None.
- units() - Method in interface nxopen.blockstyler.ExpressionBlock
-
Returns the Units for the expression
License requirements: None.
- units() - Method in interface nxopen.blockstyler.LinearDimension
-
Returns the Units
License requirements: None.
- units() - Method in interface nxopen.blockstyler.OnPathDimension
-
Returns the Units
License requirements: None.
- units() - Method in interface nxopen.blockstyler.RadiusDimension
-
Returns the Units
License requirements: None.
- units() - Method in interface nxopen.cae.SimConditionParam
-
Returns the parameter units
License requirements: None.
- units() - Method in interface nxopen.CGMBuilder
-
Returns the units of the X and Y dimensions to be used when Dimension has been selected
from the Size option.
- units() - Method in interface nxopen.DxfdwgImporter
-
Returns the Units command - this option will determine the destination part units.
- units() - Method in interface nxopen.Expression
-
Returns the units for the expression.
- units() - Method in interface nxopen.features.SectionInertiaAnalysisBuilder
-
Returns the units for calculations
License requirements: None.
- units() - Method in interface nxopen.fields.FieldVariable
-
Returns the units for this variable, which can be null if the variable is unitless.
- units() - Method in interface nxopen.FileNew
-
Returns the units for the new file being created
License requirements: None.
- units() - Method in interface nxopen.geometricanalysis.SolidDensity
-
- units() - Method in interface nxopen.PlotBuilder
-
Returns the units used to create the banner.
- units() - Method in interface nxopen.PrintPDFBuilder
-
Returns the units of the X and Y dimensions to be used when Dimension has been selected
from the Size option.
- units() - Method in interface nxopen.ScalarMatrixValue
-
Returns the units for the Matrix Value.
- units - Variable in class nxopen.uf.UFCgm.CustomWidths
-
- units - Variable in class nxopen.uf.UFCgm.Dimensions
-
- units - Variable in class nxopen.uf.UFUi.AskCreatePartFilenameData
-
- units - Variable in class nxopen.uf.UFWeight.Properties
-
- units() - Method in interface nxopen.WidthDefinition
-
Returns the units.
- UNITS_CUSTOM - Static variable in class nxopen.uf.UFWeight.UnitsType
-
- UNITS_GC - Static variable in class nxopen.uf.UFWeight.UnitsType
-
- UNITS_GM - Static variable in class nxopen.uf.UFWeight.UnitsType
-
- UNITS_KM - Static variable in class nxopen.uf.UFWeight.UnitsType
-
- UNITS_KMM - Static variable in class nxopen.uf.UFWeight.UnitsType
-
- UNITS_LF - Static variable in class nxopen.uf.UFWeight.UnitsType
-
- UNITS_LI - Static variable in class nxopen.uf.UFWeight.UnitsType
-
- UNITS_MISMATCH - Static variable in class nxopen.PartCollection.SdpsStatus
-
The work part and displayed part have different units
- UNITS_PART - Static variable in class nxopen.uf.UFModl.Units
-
- UnitsData() - Constructor for class nxopen.cae.FunctionBuilder.UnitsData
-
- unitsEnum() - Method in interface nxopen.display.StudioImageCaptureBuilder
-
Returns the units enum
License requirements: None.
- UnitsFormatPreferences - Interface in nxopen.annotations
-
Represents units and format preferences .
- UnitsFormatPreferences() - Constructor for class nxopen.uf.UFDrf.UnitsFormatPreferences
-
- UnitsFormatPreferences(UFDrf.LinearUnits, UFDrf.FractionType, UFDrf.DecimalPointCharacter, boolean, UFDrf.TolerancePlacement, UFDrf.AngularUnits, UFDrf.AngularUnits, UFDrf.AngularSuppressZeros, UFDrf.DualDimensionFormat, UFDrf.LinearUnits, UFDrf.FractionType, boolean) - Constructor for class nxopen.uf.UFDrf.UnitsFormatPreferences
-
- unitSize - Variable in class nxopen.uf.UFStd.StlParams
-
- unitSize - Variable in class nxopen.uf.UFStd.VrmlParams
-
- unitsStyle() - Method in interface nxopen.annotations.StyleBuilder
-
Returns the units style builder
License requirements: None.
- UnitsStyleBuilder - Interface in nxopen.annotations
-
- unitsToggle() - Method in interface nxopen.cam.FeedsWedmBuilder
-
Returns the units toggle
License requirements: cam_base ("CAM BASE")
.
- unitSubassemblies() - Method in interface nxopen.assemblies.ClearanceAnalysisBuilder
-
Returns the selected unit subassemblies.
- unitSystem() - Method in interface nxopen.cae.xyplot.AxisStyleSetting
-
Returns the unit system
License requirements: None.
- UnitSystem - Class in nxopen.cae.xyplot
-
Represents the unit system
- unitType - Variable in class nxopen.uf.UFAttr.GetRealUserAttributeData
-
- unitVec - Variable in class nxopen.uf.UFVec2.UnitizeData
-
- unitVec - Variable in class nxopen.uf.UFVec3.UnitizeData
-
- UNIVERSAL - Static variable in class nxopen.motion.JointDefine.Type
-
This joint type allows two rotations.
- UNIVERSAL_JOINT - Static variable in class nxopen.uf.UFMotion.JointType
-
- UniversalUnform - Interface in nxopen.features
-
Represents a UniversalUnform feature
To create or edit an instance of this class, use
UniversalUnformBuilder
Created in NX8.5.0
- UniversalUnformBuilder - Interface in nxopen.tooling
-
- UniversalUnformBuilder.BendTypes - Class in nxopen.tooling
-
The types of bend
- UNJ - Static variable in class nxopen.cam.DrillThreadMillToolBuilder.ToolFormTypeTypes
-
UNJ
- UNJ - Static variable in class nxopen.cam.fbm.ThreadFeatureGeometry.Form
-
Form: UNJ
- UNJ - Static variable in class nxopen.cam.HoleBossGeom.FormTypes
-
Form: UNJ
- UNKNOWN - Static variable in class nxopen.assemblies.DegreesOfFreedomResult
-
The calculation failed to produce a result, possibly because the component
is inconsistently constrained.
- UNKNOWN - Static variable in class nxopen.bodydes.OnestepUnformBuilder.UnfoldMode
-
Onestep unfold mode is unknown
- UNKNOWN - Static variable in class nxopen.cae.BaseIteration.IterationType
-
Iteration has an Unknown type
- UNKNOWN - Static variable in class nxopen.cae.BaseIteration.IterationValueType
-
Value has an Unknown type
- UNKNOWN - Static variable in class nxopen.cae.CreateJtBuilder.Component
-
Value has an Unknown type
- UNKNOWN - Static variable in class nxopen.cae.Result.LoadcaseValueType
-
Unknown Value type
- UNKNOWN - Static variable in class nxopen.cae.Result.Quantity
-
- UNKNOWN - Static variable in class nxopen.cae.Result.SolutionType
-
Unknown
- UNKNOWN - Static variable in class nxopen.cae.SimLoadRecipeMapEntryTargetTypes.TargetTypes
-
- UNKNOWN - Static variable in class nxopen.cae.SimLoadRecipeMapping.OrientationTypes
-
- UNKNOWN - Static variable in class nxopen.cae.XyFunctionUnit
-
Unknown unit
- UNKNOWN - Static variable in class nxopen.cam.BlankIpw.StatusTypes
-
blank ipw status unknown
- UNKNOWN - Static variable in class nxopen.cam.HoleBossGeom.DepthLimitTypes
-
Deprecated.
It maybe mixed type with both Through and Blind features in NX8.
- UNKNOWN - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.ToleranceSource
-
Unknown Source
- UNKNOWN - Static variable in class nxopen.cam.SimulationOptionsBuilder.ToolShapeColl
-
unknown shape
- UNKNOWN - Static variable in class nxopen.die.DieBuildStatusOption
-
Build status is unknown since sub feature has not been built yet.
- UNKNOWN - Static variable in class nxopen.features.AnalyzePocketBuilder.AngledWallSolutions
-
Unknown End Mill solution.
- UNKNOWN - Static variable in class nxopen.features.AnalyzePocketBuilder.ToolTypes
-
unknown.
- UNKNOWN - Static variable in class nxopen.features.BlendPocketBuilder.AngledWallSolutions
-
Unknown End Mill solution.
- UNKNOWN - Static variable in class nxopen.features.BlendPocketBuilder.ToolTypes
-
unknown.
- UNKNOWN - Static variable in class nxopen.features.GlobalShapingBuilder.DeformationTypeValues
-
Unknown deformation
- UNKNOWN - Static variable in class nxopen.features.sheetmetal.SheetmetalBendState
-
- UNKNOWN - Static variable in class nxopen.features.sheetmetal.SheetmetalFaceLayer
-
- UNKNOWN - Static variable in class nxopen.features.sheetmetal.SheetmetalFaceType
-
- UNKNOWN - Static variable in class nxopen.features.shipdesign.PenetrationRequestBuilder.RequestDialogType
-
- UNKNOWN - Static variable in class nxopen.fields.FieldVariable.Type
-
- UNKNOWN - Static variable in class nxopen.formboard.UpdateDiscrepancy.ObjectType
-
Unknown type.
- UNKNOWN - Static variable in class nxopen.formboard.UpdateDiscrepancy.Type
-
Unknown type, not valid.
- UNKNOWN - Static variable in class nxopen.layout2d.Layout2dDefinitionStatus
-
- UNKNOWN - Static variable in class nxopen.mechatronics.ExternalConnectionElementBuilder.DataType
-
unknown
- UNKNOWN - Static variable in class nxopen.mechatronics.OPCClientBuilder.TagDataType
-
unknown type
- UNKNOWN - Static variable in class nxopen.pdm.ModelElementRevision.PositioningStatus
-
- UNKNOWN - Static variable in class nxopen.positioning.ComponentConstraint.DirectionToFixed
-
No information available
- UNKNOWN - Static variable in class nxopen.positioning.ConstraintReference.ConstraintOrder
-
No order specified
- UNKNOWN - Static variable in class nxopen.positioning.ConstraintReference.GeometryType
-
No geometry suitable for solving
- UNKNOWN - Static variable in class nxopen.positioning.Network.ObjectStatus
-
Not yet evaluated.
- UNKNOWN - Static variable in class nxopen.preferences.RoutingMechanical.LineColorType
-
- UNKNOWN - Static variable in class nxopen.routing.CreationMethod
-
- UNKNOWN - Static variable in class nxopen.routing.DesignRuleViolationCollection.Reason
-
- UNKNOWN - Static variable in class nxopen.routing.IntegrateRunsBuilder.Button
-
unknown button ID
- UNKNOWN - Static variable in class nxopen.routing.ReuseLibrary.PartType
-
Unknown Type
- UNKNOWN - Static variable in class nxopen.routing.RouteManager.PartType
-
- UNKNOWN - Static variable in class nxopen.routing.StockType
-
Unknown overstock type
- UNKNOWN - Static variable in class nxopen.routing.Type
-
- UNKNOWN - Static variable in class nxopen.routing.WrapApplicationType
-
Unknown wrap application
- UNKNOWN - Static variable in class nxopen.sim.KinematicChain.Types
-
Unknown
- UNKNOWN - Static variable in class nxopen.Sketch.Status
-
- UNKNOWN - Static variable in class nxopen.tooling.ElectrodeComponentBuilder.Chuck
-
- UNKNOWN - Static variable in class nxopen.uf.UFWeight.StateType
-
- UNKNOWN - Static variable in class nxopen.Validation.Result
-
Unknown validation result
- UNKNOWN - Static variable in class nxopen.visualreporting.Property.DatatypeOption
-
The datatype is unknown
- UNKNOWN_CONTACT_METHOD - Static variable in class nxopen.uf.UFMotion.ContactMethod
-
- UNKNOWN_COUPLER - Static variable in class nxopen.uf.UFMotion.JointCouplerType
-
- UNKNOWN_ERROR - Static variable in class nxopen.uf.UFConstants
-
- UNKNOWN_GEOMETRY_FORMAT - Static variable in class nxopen.uf.UFMotion.AnlGeometryFormat
-
- UNKNOWN_INPUT - Static variable in class nxopen.uf.UFMotion.JointMotionInputType
-
- UNKNOWN_JOINT - Static variable in class nxopen.uf.UFMotion.JointType
-
- UNKNOWN_MEASUREMENT - Static variable in class nxopen.uf.UFMotion.MeasurementType
-
- UNKNOWN_SOLVER - Static variable in class nxopen.uf.UFMotion.Solver
-
- UNKNOWN_SPRING_DAMPER - Static variable in class nxopen.uf.UFMotion.SpringDamperType
-
- UNKNOWN_STATUS - Static variable in class nxopen.uf.UFSket.Status
-
- UNKOWN_ERROR - Static variable in class nxopen.uf.UFConstants
-
- UNLINK_INSTANCE - Static variable in class nxopen.uf.UFCamPref.CamPref
-
- unlinkInstance() - Method in interface nxopen.cam.Operation
-
Unlink instance
License requirements: cam_base ("CAM BASE")
.
- unlinkInstance - Variable in class nxopen.uf.UFCam.Preferences
-
- unlinkInstances() - Method in interface nxopen.cam.Preferences
-
Returns the unlink instances
License requirements: None.
- unlinkMaterial(Tag) - Method in interface nxopen.uf.UFSf
-
- unlinkSection(Tag, Tag) - Method in interface nxopen.uf.UFSf
-
- unload(VisualReport) - Method in interface nxopen.visualreporting.VisualReportManager
-
Unloads an opened nxopen.visualreporting.VisualReport
.
- unloadAllTemplates() - Method in interface nxopen.cae.xyplot.BaseTemplateManager
-
Unloads all graph template files
License requirements: nx_ftk ("NX Advanced Graphing")
.
- UNLOADED - Static variable in class nxopen.assemblies.PositionOverrideType
-
Position overridden, but in an unloaded parent
- UNLOADED_GEOMETRY - Static variable in class nxopen.positioning.Constraint.SolverStatus
-
The constraint could not solve as some geometry is unloaded
- unloadFile(String) - Method in interface nxopen.cae.ftk.DataManager
-
Unloads afu/op2 file
License requirements: nx_ftk ("NX Advanced Graphing")
.
- unloadLibrary(String) - Method in interface nxopen.uf.UF
-
- unloadMapFile(String) - Method in interface nxopen.uf.UFHelp
-
- unloadMea() - Method in interface nxopen.cam.InspectionMeasDataBuilder
-
Unload measured data file
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- unloadPart() - Method in interface nxopen.routing.PlacePartBuilder
-
Update the loaded part with a new placement location and object.
- unloadPath(Tag) - Method in interface nxopen.uf.UFOper
-
- unloadResult(int) - Method in interface nxopen.cae.Post
-
Unload the input result id.
- unloadResultFile(String) - Method in interface nxopen.cae.Post
-
Unload results that use the input file name
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- unloadSections() - Method in interface nxopen.geometricutilities.AlignmentMethodBuilder
-
Unload sections held by the builder
License requirements: solid_modeling ("SOLIDS MODELING")
.
- unloadSimulation(NXObject, String) - Method in interface nxopen.motion.MotionSimulation
-
Unload the simulation through input part name
License requirements: mechanisms ("MECHANISMS")
.
- unloadSimulation(NXObject, NXObject) - Method in interface nxopen.motion.MotionSimulation
-
Unload the simulation through input part object
License requirements: mechanisms ("MECHANISMS")
.
- unloadTemplate(String) - Method in interface nxopen.cae.xyplot.BaseTemplateManager
-
Unloads the graph template file
License requirements: nx_ftk ("NX Advanced Graphing")
.
- UNLOCK - Static variable in class nxopen.UI.Status
-
Unlock status
- unlockAccess() - Method in interface nxopen.UI
-
Unlocks access for a UI that has been locked by a call to
UI.lockAccess()
.
- unlockAllConstraints() - Method in interface nxopen.features.ShowRelatedFacesBuilder
-
Unlocks all the persistent constraints on the related face
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE")
.
- unlockAngle(NXObject) - Method in interface nxopen.routing.LineSegment
-
Removes the angle, parallel or perpendicular constraint that constrains
the angle between this line segment and the input object.
- unlockConstraint(Feature) - Method in interface nxopen.features.FaceRecognitionBuilder
-
Unlocks the persistent constraint
License requirements: gateway ("UG GATEWAY")
.
- unlockConstraint(Feature) - Method in interface nxopen.features.ShowRelatedFacesBuilder
-
Unlocks the persistent constraint
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE")
.
- UNLOCKED - Static variable in class nxopen.features.shipdesign.ManufacturingStockBuilder.LockedStatus
-
The NX attribute is set with unlocked status.
- unlockFromObject(NXObject) - Method in interface nxopen.routing.ControlPoint
-
Removes the touch constraint that exists between the
control point and the input object.
- unlockLength() - Method in interface nxopen.routing.LineSegment
-
Removes the distance constraint that constrains the distance between
the two end control points of this line segment.
- unlockSegment(Curve, AddendumSectionBuilder.SegmentType, AddendumSectionBuilder.SegmentParameterType) - Method in interface nxopen.die.AddendumSectionBuilder
-
Unlock a segment parameter value.
- unlockUgAccess(int) - Method in interface nxopen.uf.UFUi
-
- unlockValue(String) - Method in interface nxopen.options.ChangeList
-
Unlock option value.
- unlockValue(String) - Method in interface nxopen.options.DraftingStandardChangeList
-
Unlock option value.
- unlogConcurrent(NXObject) - Method in interface nxopen.routing.DesignRuleManager
-
Remove an object from the list of objects to be checked at the next design rule check.
- unmapFemFromAssemblyComponent(Component) - Method in interface nxopen.cae.AssyFEModel
-
Unmap a fem part from an assembly component in an assembly fem
License requirements: nx_masterfem ("Finite Element Modeling")
.
- unmappedFaceThreshold() - Method in interface nxopen.cae.LaminateImportedLayupBuilder
-
Returns the unmapped face threshold value (%).
- unmatchedEdges() - Method in interface nxopen.features.DraftBodyBuilder
-
Returns the edges that will not be matched when matching option is AllButSelected
License requirements: None.
- unmatchedFaces() - Method in interface nxopen.features.DraftBodyBuilder
-
Returns the faces that will not be matched when matching option is AllButSelected
License requirements: None.
- UnmatchedResultCategory - Interface in nxopen.visualreporting
-
An unmatched result category within a nxopen.visualreporting.VisualReport
.
- UNMERGEABLE - Static variable in class nxopen.cae.modelcheck.DuplicateNodesCheckBuilder.ListOption
-
List the duplicate node pairs unmergeable
- unmergeCells(Tag) - Method in interface nxopen.uf.UFTabnot
-
- UNMESHED_POLYGON_BODIES - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide unmeshed polygon bodies
- unModel() - Method in interface nxopen.routing.ModelTerminalsBuilder
-
The UnModel the selected terminals
License requirements: routing_harness ("Routing Harness")
.
- unModelAll() - Method in interface nxopen.routing.ModelTerminalsBuilder
-
Unmodel all of the terminals
License requirements: routing_harness ("Routing Harness")
.
- unmodelTerminals(Port, Port[]) - Method in interface nxopen.routing.SegmentManager
-
Un-model terminals and update connection list routes for specified terminal ports.
- unmountKimComp(UFVariant, String, double) - Method in interface nxopen.uf.UFSim
-
- unmountTool(UFVariant, String, double) - Method in interface nxopen.uf.UFSim
-
- UNNAMED - Static variable in class nxopen.PartCleanup.DeleteGroups
-
delete only the unnamed empty groups
- UnnestModuleBuilder - Interface in nxopen.geometricutilities
-
- unparameterizedSolids - Variable in class nxopen.features.FeatureCollection.CreateIntersectFeatureData
-
True if operation resulted in unparameterized solids.
- unparameterizedSolids - Variable in class nxopen.features.FeatureCollection.CreateSubtractFeatureData
-
True if operation resulted in unparameterized solids.
- unparameterizedSolids - Variable in class nxopen.features.FeatureCollection.CreateUniteFeatureData
-
True if operation resulted in unparameterized solids.
- unpopulatedBehaviour() - Method in interface nxopen.preferences.SessionPdm
-
Returns the behaviour when an unpopulated part is loaded
License requirements: None.
- unprocessedPartoccs - Variable in class nxopen.uf.UFAssem.AskUnprocessedPartoccsData
-
- unrecognizeCoaxial(boolean) - Method in interface nxopen.features.FaceRecognitionBuilder
-
Removes coaxial relations to last faces added to face collector
License requirements: gateway ("UG GATEWAY")
.
- unrecognizeCoplanar(boolean) - Method in interface nxopen.features.FaceRecognitionBuilder
-
Removes coplanar relations to last faces added to face collector
License requirements: gateway ("UG GATEWAY")
.
- unrecognizeCoplanarAxes(boolean) - Method in interface nxopen.features.FaceRecognitionBuilder
-
Removes coplanar axes relations to last faces added to face collector
License requirements: gateway ("UG GATEWAY")
.
- unrecognizeEqualDiameter(boolean) - Method in interface nxopen.features.FaceRecognitionBuilder
-
Removes equal diameter relations to last faces added to face collector
License requirements: gateway ("UG GATEWAY")
.
- unrecognizeOffset(boolean) - Method in interface nxopen.features.FaceRecognitionBuilder
-
Removes offset relations to last faces added to face collector
License requirements: gateway ("UG GATEWAY")
.
- unrecognizeParallel(boolean) - Method in interface nxopen.features.FaceRecognitionBuilder
-
Removes parallel relations to last faces added to face collector
License requirements: gateway ("UG GATEWAY")
.
- unrecognizePerpendicular(boolean) - Method in interface nxopen.features.FaceRecognitionBuilder
-
Removes perpendicular relations to last faces added to face collector
License requirements: gateway ("UG GATEWAY")
.
- unrecognizeSymmetric(boolean) - Method in interface nxopen.features.FaceRecognitionBuilder
-
Removes symmetric relations to last faces added to face collector
License requirements: gateway ("UG GATEWAY")
.
- unrecognizeTangent(boolean) - Method in interface nxopen.features.FaceRecognitionBuilder
-
Removes tangent relations to last faces added to face collector
License requirements: gateway ("UG GATEWAY")
.
- unrecognizeThicknessChain(boolean) - Method in interface nxopen.features.FaceRecognitionBuilder
-
Removes thickness chain relations to last faces added to face collector
License requirements: gateway ("UG GATEWAY")
.
- unregisterCliffBlend() - Method in interface nxopen.uf.UFModlFeatures
-
- unregisterConfigureContextMenuCallback(int) - Method in interface nxopen.menubar.MenuBarManager
-
Unregisters a callback for customizing context menus.
- unregisterEventCb(int) - Method in interface nxopen.uf.UFTag
-
- unregisterMiscCb(int) - Method in interface nxopen.uf.UFUndo
-
- unregisterRpoRoutine() - Method in interface nxopen.uf.UFModlGeneral
-
- unregisterUdfMappingRoutine() - Method in interface nxopen.uf.UFModlGeneral
-
- unregisterVarBlend() - Method in interface nxopen.uf.UFModlFeatures
-
- UNRESOLVED - Static variable in class nxopen.features.MatchedReferenceBuilder.ResolvedStatus
-
user unresolved
- unroute(ElectricalStockDevice[]) - Method in interface nxopen.routing.electrical.ElectricalStockDeviceCollection
-
Removes all bundle
Stock
from input stock devices.
- unrouteAll() - Method in interface nxopen.routing.electrical.ElectricalStockDeviceCollection
-
Removes all bundle
Stock
from all stock devices.
- unselectComponent(String) - Method in interface nxopen.sim.SinumerikCaPlaceholderBuilder
-
The select placeholder tools component
License requirements: nx_sinumerik_ca ("Sinumerik Collision Avoidance")
.
- unSelectedLayers() - Method in interface nxopen.DxfdwgImporter
-
Returns the UnSelectedLayers command - sets the list of unselected layers
License requirements: None.
- unset - Variable in class nxopen.NXObject.AttributeInformation
-
The attribute has not been set (i.e. has no value) on the object (used when getting attribute information)
- unsetContainment(Tag) - Method in interface nxopen.uf.UFModeling
-
- unsetPartMaxWeight(Tag) - Method in interface nxopen.uf.UFWeight
-
- unsetPartMinWeight(Tag) - Method in interface nxopen.uf.UFWeight
-
- unsetShadowForView(Tag) - Method in interface nxopen.uf.UFRoute
-
- unsetSuppressExpTag(Tag) - Method in interface nxopen.uf.UFModlGeneral
-
- unsetSuppressionExp(Tag) - Method in interface nxopen.uf.UFAssem
-
- Unsew - Interface in nxopen.features
-
Represents a Unsew feature
To create or edit an instance of this class, use
UnsewBuilder
Created in NX5.0.0
- UnsewBuilder - Interface in nxopen.features
-
- UnsewBuilder.UnsewOutput - Class in nxopen.features
-
Unsew body option type.
- UnsewBuilder.UnsewTool - Class in nxopen.features
-
Unsew tool option type.
- UNSIGNED - Static variable in class nxopen.uf.UFModl.FeatureSigns
-
- UNSOLVED - Static variable in class nxopen.cae.DurabilitySolverBuilder.ActiveEventSolveOptionsEnum
-
Unsolved
- unsolvedCurvesColor() - Method in interface nxopen.preferences.PartSketch
-
Returns the sketch unsolved curves color
License requirements: None.
- UNSORTED - Static variable in class nxopen.blockstyler.Tree.ColumnSortOption
-
Unsorted
- UNSPECIFIED - Static variable in class nxopen.layout2d.Layout2dDefinitionLocation
-
- UNSPECIFIED_ERROR - Static variable in class nxopen.assemblies.ClearanceSet.PenetrationDepthResult
-
- unspecifiedColor() - Method in interface nxopen.cae.BCSelectionDisplayBuilder
-
Returns the unspecified color for target sets
License requirements: None.
- UnStitchEdgeBuilder - Interface in nxopen.cae
-
- UNSUITABLE_OBJECT_TYPES - Static variable in class nxopen.uf.UFConstants
-
- unsuppress() - Method in interface nxopen.assemblies.Component
-
Unsuppresses the component in the ComponentAssembly that contains its controlling Arrangement.
- unsuppress(Component[]) - Method in interface nxopen.assemblies.Component
-
Unsuppresses an array of components in the ComponentAssembly that contains their
controlling Arrangement.
- unsuppress() - Method in interface nxopen.assemblies.ComponentPattern
-
Unsuppresses the component pattern object.
- unsuppressArray(Tag) - Method in interface nxopen.uf.UFAssem
-
- unsuppressComponents(Component[], Arrangement[]) - Method in interface nxopen.assemblies.ComponentAssembly
-
Unsuppresses an array of components in this ComponentAssembly
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- unsuppressComponents(Component[]) - Method in interface nxopen.assemblies.ComponentAssembly
-
Unsuppresses an array of components in all
Arrangement
s in this ComponentAssembly
License requirements: assemblies ("ASSEMBLIES MODULE")
Created in NX3.0.0
- unSuppressConstraints() - Method in interface nxopen.formboard.OrientBranchBuilder
-
- UNSUPPRESSED - Static variable in class nxopen.assemblies.ComponentAssembly.SuppressedState
-
Unsuppressed
- UNSUPPRESSED_BY_EXP - Static variable in class nxopen.assemblies.ComponentAssembly.SuppressedState
-
Unsuppressed by expression
- unsuppressFeature(Tag[]) - Method in interface nxopen.uf.UFModeling
-
- unsuppressFeatures(Feature[]) - Method in interface nxopen.features.FeatureCollection
-
Unsuppress the given features
License requirements: solid_modeling ("SOLIDS MODELING")
.
- unsuppressInstances(int, Tag[]) - Method in interface nxopen.uf.UFAssem
-
- UNTIL_EXTENDED - Static variable in class nxopen.geometricutilities.Extend.ExtendType
-
- UNTIL_HOME - Static variable in class nxopen.tooling.LsdynaGeometryPreparationBuilder.ProcessActionBinder
-
The process action for binder is until home.
- UNTIL_HOME - Static variable in class nxopen.tooling.LsdynaGeometryPreparationBuilder.ProcessActionDie
-
The process action for die is until home.
- UNTIL_HOME - Static variable in class nxopen.tooling.LsdynaGeometryPreparationBuilder.ProcessActionPunch
-
The process action for punch is until home.
- UNTIL_NEXT - Static variable in class nxopen.ExtrudeLimitDataLimitType
-
- UNTIL_NEXT - Static variable in class nxopen.features.HolePackageBuilder.HoleDepthLimitOptions
-
Until next limit options
- UNTIL_NEXT - Static variable in class nxopen.geometricutilities.EndHoleData.HoleDepthLimitOptions
-
Until next limit options
- UNTIL_NEXT - Static variable in class nxopen.geometricutilities.Extend.ExtendType
-
- UNTIL_SELECTED - Static variable in class nxopen.ExtrudeLimitDataLimitType
-
- UNTIL_SELECTED - Static variable in class nxopen.features.HolePackageBuilder.HoleDepthLimitOptions
-
Until selected limit options
- UNTIL_SELECTED - Static variable in class nxopen.features.sheetmetal.FlangeBuilder.MatchFaceOptions
-
The flange face is extended until the selected plane
- UNTIL_SELECTED - Static variable in class nxopen.features.TrimAndExtendBuilder.OperationType
-
- UNTIL_SELECTED - Static variable in class nxopen.features.TrimExtendBuilder.CreationTypes
-
By Until Selected
- UNTIL_SELECTED - Static variable in class nxopen.geometricutilities.CurveExtendData.LimitOptions
-
Until Selected
- UNTIL_SELECTED - Static variable in class nxopen.geometricutilities.EndHoleData.HoleDepthLimitOptions
-
Until selected limit options
- UNTIL_SELECTED - Static variable in class nxopen.geometricutilities.Extend.ExtendType
-
- UNTIL_SELECTED_EXTEND_FACE - Static variable in class nxopen.ExtrudeLimitDataLimitType
-
- untilSelectedObject() - Method in interface nxopen.geometricutilities.CurveExtendData
-
Returns the until selected object
License requirements: None.
- untilSelectedTarget() - Method in interface nxopen.features.HolePackageBuilder
-
Returns the until selected target - this is applicable for general hole, threaded hole and drill size hole type
License requirements: None.
- untilSelectedTarget() - Method in interface nxopen.geometricutilities.EndHoleData
-
Returns the until selected target - this is applicable for general hole and threaded hole type
License requirements: None.
- Untrim - Interface in nxopen.features
-
Represents a Untrim feature.
- UNTRIM - Static variable in class nxopen.tooling.EjectorPostProcessingBuilder.TrimMethod
-
Untrim
- UNTRIM - Static variable in class nxopen.tooling.TrimMoldComponentsBuilder.TrimMethod
-
Untrim
- UntrimBuilder - Interface in nxopen.features
-
- UNTYPED_REFERENCE - Static variable in class nxopen.pdm.PdmSoaqueryNxmgrfielddatatype
-
Untyped reference
- UNUSED - Static variable in class nxopen.geometricutilities.EntityUsageInfo.Status
-
unused
- UNUSED - Static variable in class nxopen.MeshParameterData.Type
-
- unusedFileManagement() - Method in interface nxopen.tooling.ToolingManager
-
Returns the UnusedFileManagement instance belonging to this part .
- UnusedFileManagementBuilder - Interface in nxopen.tooling
-
- UnusedFileManagementBuilder.FileDirectory - Class in nxopen.tooling
-
the unused file location.
- UnusedFileManagementCollection - Interface in nxopen.tooling
-
- UNWRAP - Static variable in class nxopen.features.WrapBuilder.Types
-
Curves are to be unwrapped from the selected faces onto the tangent plane,
during edit you can get this value but any change will be ignored.
- UNWRAP - Static variable in class nxopen.uf.UFCurve.WrapType
-
- UP - Static variable in class nxopen.annotations.PartsListBuilder.PartsListGrowDirectionOptions
-
- UP - Static variable in class nxopen.annotations.TableCellStyleBuilder.TabDirectionType
-
- UP - Static variable in class nxopen.annotations.TableSectionStyleBuilder.ContinuationPropertyType
-
Up
- UP - Static variable in class nxopen.drawings.DrawingRegionBuilder.RegionVerticalGrowthDirection
-
- UP - Static variable in class nxopen.features.shipdesign.SectionViewBuilder.DirectionOptions
-
- UP - Static variable in class nxopen.features.shipdesign.StandardPartItemBuilder.Direction
-
up
- UP - Static variable in class nxopen.tooling.BendInsertDesignBuilder.BendingDirectionOption
-
bending up
- UP_AND_DOWN - Static variable in class nxopen.cam.CutParametersPlungeDirectionTypes
-
Cut Up and Down
- UP_DOWN_TRIANGLES - Static variable in class nxopen.uf.UFDisp.PolyMarker
-
- UP_DOWN_TRIANGLES - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- UP_TO_DATE - Static variable in class nxopen.cam.BlankIpw.StatusTypes
-
blank ipw status up to date
- UP_TO_DATE - Static variable in class nxopen.pdm.ModelElementRevision.PositioningStatus
-
- UP_TO_DATE - Static variable in class nxopen.userdefinedobjects.UserDefinedObject.LinkStatus
-
The associated object is up to date.
- UP_TO_NEAREST - Static variable in class nxopen.formboard.LayoutLengthOptions.RoundingMethod
-
Lengths are rounded up to the
nearest increment value.
- uParamater - Variable in class nxopen.geometricanalysis.GeometricProperties.Face
-
U parameter
- uparameter() - Method in interface nxopen.cae.MeshPointOnFaceBuilder
-
Returns the u parameter
License requirements: None.
- uParameter - Variable in class nxopen.geometricanalysis.GeometricProperties.CaeFace
-
u parameter of the closest point in Root Part Coordinates
- uparameter1() - Method in interface nxopen.weld.FilletBuilder
-
- uparameter1() - Method in interface nxopen.weld.WeldGrooveBuilder
-
Returns the u parameter for first face
License requirements: ugweld ("UG WELD")
.
- uparameter2() - Method in interface nxopen.weld.FilletBuilder
-
- uparameter2() - Method in interface nxopen.weld.WeldGrooveBuilder
-
Returns the u parameter for second face
License requirements: ugweld ("UG WELD")
.
- upArrow(String[], String[]) - Method in interface nxopen.gateway.BaseExplicitOrderBuilder
-
Moves up the row/rows selected by the user in the lists
License requirements: None.
- upatches() - Method in interface nxopen.features.RapidSurfaceBuilder
-
Returns the patches(U)
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- upatches() - Method in interface nxopen.geometricutilities.DegreesAndSegmentsOrPatchesBuilder
-
Returns the u patches
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- uPatches - Variable in class nxopen.uf.UFModl.RoughOffset
-
- uPatchIntData - Variable in class nxopen.uf.UFModl.RefitFaceData
-
- update(UIBlock) - Method in interface nxopen.blockstyler.BlockDialog.Update
-
Update callback
License requirements: None.
- update() - Method in interface nxopen.cam.BlankIpw
-
Update the blank ipw
License requirements: cam_base ("CAM BASE")
.
- update() - Method in interface nxopen.drawings.DraftingView
-
Updates the drawing member view on a drawing.
- update(Point3d, Matrix3x3, double, double, String, double, RasterImage.MaxTextureSize) - Method in interface nxopen.features.RasterImage
-
Updates a raster image feature
License requirements: studio_visualize ("STUDIO VISUALIZE")
.
- update(OnPathDimensionBuilder.UpdateReason) - Method in interface nxopen.geometricutilities.OnPathDimensionBuilder
-
Updates this object if the path or through point location has changed.
- update() - Method in interface nxopen.layout2d.Component
-
Updates the component and all of its sub components.
- UPDATE - Static variable in class nxopen.mechatronics.ComparisonResultContext.ResolveConflictAction
-
Update action
- UPDATE - Static variable in class nxopen.routing.RouteManager.ImportMode
-
Update existing objects with data from the imported objects.
- update() - Method in interface nxopen.Sketch
-
Updates the sketch
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- update(NXObject[]) - Method in interface nxopen.Sketch
-
Updates the given set of geometries in the sketch
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- update() - Method in interface nxopen.SmartObject
-
Returns the update option.
- UPDATE - Static variable in class nxopen.tooling.BlankGeneratorBuilder.EditBlankType
-
Update the blank
- UPDATE - Static variable in class nxopen.tooling.ScrapDesignBuilder.EditScrapType
-
Updates scraps if there is any design change
- update() - Method in interface nxopen.tooling.SpreadsheetData
-
Update the associated objects according to the spreadsheet data
License requirements: None.
- update - Variable in class nxopen.uf.UFAssem.Options
-
- update() - Method in interface nxopen.uf.UFModeling
-
- update(Tag) - Method in interface nxopen.uf.UFPlist
-
- update(UFVariant, String) - Method in interface nxopen.uf.UFSim
-
- update(Tag) - Method in interface nxopen.uf.UFTabnot
-
- Update - Interface in nxopen
-
Provides methods for update and delete.
- UPDATE - Static variable in class nxopen.userdefinedobjects.UserDefinedEvent.Reason
-
Update UDO event
- Update.FailureOption - Class in nxopen
-
Specifies the action to take when an object fails to update.
- Update.Option - Class in nxopen
-
Specifies whether a method should perform an update or not.
- UPDATE_ACCEPT - Static variable in class nxopen.uf.UFModl.UpdateOption
-
- UPDATE_ACCEPT_ALL - Static variable in class nxopen.uf.UFModl.UpdateOption
-
- UPDATE_AFTER_MODELING - Static variable in class nxopen.uf.UFSo.UpdateOption
-
- UPDATE_AFTER_PARENT_BODY - Static variable in class nxopen.uf.UFSo.UpdateOption
-
- UPDATE_ATTRIBUTES - Static variable in class nxopen.mechatronics.ComparisonResult.Category
-
Update Attributes category
- UPDATE_EXISTING - Static variable in class nxopen.features.shipdesign.TransitionBuilder.TransitionMethods
-
- UPDATE_INTERRUPT - Static variable in class nxopen.uf.UFModl.UpdateOption
-
- UPDATE_MIXED - Static variable in class nxopen.uf.UFSo.UpdateOption
-
- UPDATE_NO_OPTION - Static variable in class nxopen.uf.UFModl.UpdateOption
-
- UPDATE_OTHER_COMPONENTS - Static variable in class nxopen.tooling.ConcurrentDesignManagementBuilder.UpdateTypes
-
the update other components action
- UPDATE_PARTS - Static variable in class nxopen.mechatronics.ComparisonResult.Category
-
Update Parts category
- UPDATE_POST_FROM_TOOL - Static variable in class nxopen.uf.UFCamPref.CamPref
-
- UPDATE_SUPPRESS - Static variable in class nxopen.uf.UFModl.UpdateOption
-
- UPDATE_SUPPRESS_ALL - Static variable in class nxopen.uf.UFModl.UpdateOption
-
- UPDATE_UNDO - Static variable in class nxopen.uf.UFModl.UpdateOption
-
- UPDATE_WITHIN_MODELING - Static variable in class nxopen.uf.UFSo.UpdateOption
-
- updateAfterParentViewMove() - Method in interface nxopen.drawings.SectionLineSegmentsBuilder
-
Update the section line segments builder in case of parent view move
License requirements: drafting ("DRAFTING")
.
- updateAll() - Method in interface nxopen.cae.FluidDomainCollection
-
Updates all fluid domain recipes
License requirements: nx_adv_fluid_mod ("NX Advanced Fluid Modeling")
.
- updateAllFeatures() - Method in interface nxopen.uf.UFModeling
-
- updateAllGuideLinesLength() - Method in interface nxopen.features.GuidedExtensionBuilderEx
-
Updates the length of all the guide lines whenever the user changes the extend length of the surfaces interactively.
- updateAllGuideLinesLength() - Method in interface nxopen.tooling.GuidedExtensionBuilder
-
Updates the length of all the guide lines whenever the user changes the extend length of the surfaces interactively.
- updateAllIntrapartPartModulesInPart(Part, int) - Method in interface nxopen.Update
-
Updates all out-of-date intrapart part modules
License requirements: None.
- updateAllLinkedPartModulesInPart(Part, int) - Method in interface nxopen.Update
-
Updates all linked part modules in the part
License requirements: None.
- updateAllPlists() - Method in interface nxopen.uf.UFPlist
-
- updateAllSegmentsAutoCreateInfo() - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder
-
Method to update the auto create info for all parting segments.
- updateAngle(double) - Method in interface nxopen.routing.EditBendAngleBuilder
-
Set the vector the defines the new bend angle..
- updateApiLaminateList() - Method in interface nxopen.cae.LaminateImportedLayupBuilder
-
Updates the list of available laminates in the API
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- updateAttributesFromPart(NXObject) - Method in interface nxopen.assemblies.productinterface.ObjectBuilder
-
Updates the attributes of the product interface items in the part
License requirements: None.
- updateAutomaticViewBound() - Method in interface nxopen.drawings.DraftingView
-
Recalculates and updates the view boundary of a drawing member view
License requirements: drafting ("DRAFTING")
.
- updateAxisData() - Method in interface nxopen.weld.DatumPinBuilder
-
Updates data related to the axis.
- updateAxisData() - Method in interface nxopen.weld.DatumSurfaceBuilder
-
Updates data related to the axis.
- updateBasedOnLocationOnSection() - Method in interface nxopen.geometricutilities.BridgeCurveConnectivity
-
Updates the data based on
BridgeCurveConnectivity.locationOnSection()
and
BridgeCurveConnectivity#setLocationOnSection
License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_1 ("basic freeform modeling")
Created in NX8.5.0
- updateBlank() - Method in interface nxopen.tooling.BlankGeneratorBuilder
-
Update a blank.
- updateBoundingBox() - Method in interface nxopen.geometricutilities.LocalUntrimBuilder
-
Updates the bounding box when changing the distance value.
- updateBoxExtents() - Method in interface nxopen.display.DynamicSectionBuilder
-
Update box section display by recomputing the box extents if necessary.
- updateBuilder() - Method in interface nxopen.features.CopyPasteBuilder
-
The update builder function, needs to be called after parent select option is reset
License requirements: solid_modeling ("SOLIDS MODELING")
.
- updateBuilderData() - Method in interface nxopen.tooling.MWDefineSheetsBuilder
-
Update the data for the "Define Sheets" builder
License requirements: None.
- updateBuilderDetails(CollaborativeDesign, String[]) - Method in interface nxopen.BasicEffectivityBuilder
-
Update this builder with new
CollaborativeDesign
and effectivity formula
License requirements: None.
- updateBuilderDetails(CollaborativeDesign, String, String[]) - Method in interface nxopen.BasicEffectivityBuilder
-
Update this builder with new
CollaborativeDesign
, validation basis formula and effectivity formulae to edit.
- updateBundleStockForFiller(ISegment[]) - Method in interface nxopen.routing.StockCollection
-
Update the bundle stock if the
Filler
stock is created underneath it.
- updateCallback(UserDefinedFeatureUpdateEvent) - Method in interface nxopen.features.UserDefinedFeatureClass.UpdateCallback
-
Prototype for update callbacks
License requirements: None.
- updateCenterCurve() - Method in interface nxopen.features.StyledBlendBuilder
-
Updates the center curve.
- updateCollectors(Curve) - Method in interface nxopen.weld.WeldJointBuilder
-
Updates the main collectors by copying data from Joint.
- updateComponentCharacteristicValues(CharacteristicList) - Method in interface nxopen.preferences.RoutingCharacteristics
-
Replaces any stored component characteristics with the input values, adds any new
values in the input list.
- updateComponentGroup(Tag, String, boolean) - Method in interface nxopen.uf.UFAssem
-
- updateConnectedPartList(NXObject[], NXObject[]) - Method in interface nxopen.routing.TransformPathBuilder
-
Update connected part list in builder as per selection or deselection of object
License requirements: routing_base ("Routing Basic")
.
- updateConstantLawProfiles() - Method in interface nxopen.features.FaceBlendBuilder
-
Updates all the constant law parms in the builder using builder section.
- updateConstraintDisplay() - Method in interface nxopen.Sketch
-
Updates the constraint display without updating the sketch
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- updateConstraintDisplay(SmartObject[]) - Method in interface nxopen.Sketch
-
Updates the constraint display of given set of geoms without updating the sketch
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- updateCoordinateSystem() - Method in interface nxopen.weld.ConnectionFinderBuilder
-
Returns the option to update the coordinate system for the node from the obtained reconnection when saved.
- updateCopies() - Method in interface nxopen.SketchPatternBuilder
-
This function updates the pattern constraint with the number of copies set in the builder
License requirements: None.
- updateCornerData(boolean, boolean) - Method in interface nxopen.features.StyledCornerBuilder
-
Updates corner data.
- updateCsys(Matrix3x3) - Method in interface nxopen.weld.JointmarkPointsBuilder
-
Update the csys using a new matrix.
- updateCsys(Point3d, Matrix3x3) - Method in interface nxopen.weld.WeldPointBuilder
-
Update coordinate system for selected points
License requirements: ugweld ("UG WELD")
.
- updateCurves() - Method in interface nxopen.geometricanalysis.CurveAnalysisCombsBuilder
-
- updateCurvesStatus(boolean) - Method in interface nxopen.features.AOCSBuilder
-
Update result curve status.
- updateCustomSymbols() - Method in interface nxopen.View
-
Updates custom symbol in a drawing member view or drawing sheet
License requirements: None.
- updateCutView(CutView) - Method in interface nxopen.CutViewCollection
-
Update the Master Cut feature associated with a cut view.
- UPDATED - Static variable in class nxopen.mechatronics.ComparisonResultElectricalPart.Status
-
Updated status
- updateData() - Method in interface nxopen.SketchIntersectionPointBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- updateDefaultElbowCharacteristicValues(CharacteristicList) - Method in interface nxopen.preferences.RoutingCharacteristics
-
Replaces any stored default elbow characteristics with the input values, adds any new
values in the input list.
- updateDefaultStandard(int, String, String, String) - Method in interface nxopen.tooling.FastenerAssy
-
Updates default standard hole data for the fastener assembly configuration
License requirements: None.
- updateDefiningPointPositionAtIndex(int, Point, boolean) - Method in interface nxopen.routing.SplinePathBuilder
-
Updates the position of a point on the spline.
- updateDeformSheetType() - Method in interface nxopen.features.GlobalShapingBuilder
-
Enable move pole
License requirements: solid_modeling ("SOLIDS MODELING")
.
- updateDelayed() - Method in interface nxopen.preferences.SessionModeling
-
Returns the update delayed option.
- updateDescription(String, String, String) - Method in interface nxopen.tooling.CaeReuseLibrary
-
Renames and updates preview image for reusable object
License requirements: None.
- UpdateDesignElementPositionBuilder - Interface in nxopen.assemblies
-
Represents the builder class that updates positions of the DE's(Shape/Reuse) or Subordinates with override that are out of date.
- updateDesignElementPositionOnLoad() - Method in interface nxopen.preferences.SessionAssemblies
-
Returns the option that enables automatic local positioning update of design elements
License requirements: nx_4gd_integration ("4th Generation Design")
.
- updateDesignPosition() - Method in interface nxopen.motion.PostProcess
-
Update design position
License requirements: mechanisms ("MECHANISMS")
.
- updateDesignVariables() - Method in interface nxopen.cae.ModelUpdateSolution
-
Update the design variable modeling objects
License requirements: nx_correl_update ("FE Model Update")
.
- updateDimensionDisplay() - Method in interface nxopen.Sketch
-
Updates the dimension display without updating the sketch
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- updateDimensionDisplay(SmartObject[]) - Method in interface nxopen.Sketch
-
Updates the dimension display of given set of geoms without updating the sketch
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- updateDimensionDisplay(NXObject[]) - Method in interface nxopen.Sketch
-
Updates the dimension display of given set of dims without updating the sketch
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.
- updateDirectionObject() - Method in interface nxopen.SketchMirrorPatternBuilder
-
This function updates the mirror constraint with the new direction in the builder
License requirements: None.
- UpdateDiscrepancy - Interface in nxopen.formboard
-
Defines a discrepancy object which contains information about a specific
difference between the formboard drawing and the 3D harness model.
- UpdateDiscrepancy.ObjectType - Class in nxopen.formboard
-
Specifies the type of objects involved in the discrepancy.
- UpdateDiscrepancy.Type - Class in nxopen.formboard
-
The general type of the discrepancy.
- updateDisplay() - Method in interface nxopen.cae.CaeDOFSetDisplay
-
Updates the display of the DOF Set
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- updateDisplay() - Method in interface nxopen.cae.SimBCDisplay
-
Updates the display of the BC
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- updateDisplay() - Method in interface nxopen.features.shipdesign.CompareModeBuilder
-
Loops through all the parts and updates the display to show the compare between the Design vs Manufacturing data
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- updateDisplay() - Method in interface nxopen.View
-
Updates the display of given view, as needed.
- updateDisplay() - Method in interface nxopen.ViewCollection
-
Updates the display of each view in the current layout.
- updateDistance(double) - Method in interface nxopen.SketchOffset
-
Updates the distance data of the constraint after its geometries are edited.
- updateDraping() - Method in interface nxopen.cae.LaminateGlobalLayup
-
Compute draping for all the plies under this global layup.
- updateDraping() - Method in interface nxopen.cae.LaminateGlobalLayupMgr
-
Compute draping for all the plies of all the global layups in the part.
- updateEditPartingLines() - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder
-
Update the parting lines being edited to reflect the change immediately
License requirements: None.
- updateEjectDirection() - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
Update the eject direction.
- updateExistingStock(Stock) - Method in interface nxopen.routing.PathStockBuilder
-
Updates an existing routing stock with settings stored in the builder.
- updateExtendDirectionsAndGuideLines(boolean) - Method in interface nxopen.features.GuidedExtensionBuilderEx
-
Updates the extend direction of curves and guide lines whenever the type of guided extension or the draw direction changes.
- updateExtrudeAndSweptSheets(int) - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder
-
Method to update the temporary Extrude and Swept sheets for changes in UI.
- updateExtrudeDistanceExpression(double) - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder
-
Update the expression for the parting surface extrude distance with a new value.
- updateFace(Face, Point3d) - Method in interface nxopen.geometricanalysis.SurfaceContinuityAnalysisBuilder
-
User selects or deselects face, update builder m_edge2, m_face2
License requirements: gateway ("UG GATEWAY")
.
- updateFaceListState(NXObject, int, int, int) - Method in interface nxopen.tooling.ReplaceSolidBuilder
-
Update face state in ReplaceSolidFaceList.
- updateFaces() - Method in interface nxopen.features.AOCSBuilder
-
Update face.
- updateFailureReportPreference() - Method in interface nxopen.preferences.SessionModeling
-
Returns the option "Update Failure Report" gives choice, whether the
user wants the update failure report to be generated for the features that
failed during current update cycle.
- updateFamilyInstance(Tag, int, boolean) - Method in interface nxopen.uf.UFPart
-
- UpdateFamilyInstanceData() - Constructor for class nxopen.uf.UFPart.UpdateFamilyInstanceData
-
- updateFastenerLength(boolean) - Method in interface nxopen.tooling.FastenerAssy
-
Updates the fastener length
License requirements: None.
- updateFastenerStacks(int, boolean, boolean) - Method in interface nxopen.tooling.FastenerAssy
-
Updates fastener stacks
License requirements: None.
- updateFeature() - Method in interface nxopen.features.DatumPlaneBuilder
-
Update the feature if the feature does not exist then create it
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT")
.
- updateFeatureNames(String, String) - Method in interface nxopen.cam.InspectionSetup
-
Update feature names in referencing operations.
- updateFeatures(int, Tag[]) - Method in interface nxopen.uf.UFGdt
-
- updateFeatures() - Method in interface nxopen.weld.JointmarkBuilder
-
Updates all the items on the points list based on the construction method and related inputs.
- updateFemodel() - Method in interface nxopen.cae.BaseFEModel
-
This method will update the finite element model so that it
is in sync with any underlying changes.
- updateFilterPaths(Point) - Method in interface nxopen.routing.ManualRouteBuilder
-
This function updates the filter paths in builder, using the given selected point.
- updateFiniteElementModel() - Method in interface nxopen.cae.ModelUpdateSolution
-
Update the finite element model
License requirements: nx_correl_update ("FE Model Update")
.
- updateFirstEdgeFace(DisplayableObject, Point3d) - Method in interface nxopen.geometricanalysis.SurfaceContinuityAnalysisBuilder
-
The user selects or deselects first edge or face, update builder m_edge1, m_face1
License requirements: gateway ("UG GATEWAY")
.
- updateFirstSection(Section) - Method in interface nxopen.weld.WeldPointBuilder
-
Update first section
License requirements: ugweld ("UG WELD")
.
- updateFlatPattern(Tag) - Method in interface nxopen.uf.UFSmd
-
- updateFlow(double, double, boolean) - Method in interface nxopen.routing.Division
-
Update the Flow.
- updateFogDisplay(ViewVisualizationSpecialEffects.FogData) - Method in interface nxopen.preferences.ViewVisualizationSpecialEffects
-
Applies current fog settings to display
License requirements: None.
- updateForAnimation() - Method in interface nxopen.uf.UFModeling
-
- updateForFaceChange() - Method in interface nxopen.tooling.ReplaceSolidBuilder
-
Update bounding box and face information.
- UpdateFormboardBuilder - Interface in nxopen.formboard
-
Class that performs the "update" of Formboard geometry.
- updateFrameBarFromStyle() - Method in interface nxopen.annotations.BaseFrameBarBuilder
-
Updates frame bar object as per style
License requirements: nx_ship_drafting ("Ship Drafting")
.
- updateFrameRate() - Method in interface nxopen.preferences.SessionMeasureRequirements
-
Returns the frame rate.
- updateFromConceptModel() - Method in interface nxopen.annotations.BaseFrameBarBuilder
-
This function is used to update framebar from Concept model
License requirements: nx_ship_drafting ("Ship Drafting")
.
- updateFromLib(Tag) - Method in interface nxopen.uf.UFCutter
-
- updateFromLibrary() - Method in interface nxopen.cam.Tool
-
Update a library tool from the library
License requirements: cam_base ("CAM BASE")
.
- updateFromLoadRecipe() - Method in interface nxopen.cae.SimSolution
-
Update steps and loads of this solution created from load recipe
License requirements: None.
- updateFromRule() - Method in interface nxopen.annotations.BaseCustomSymbol
-
Updates the specified symbol from the KF rule.
- updateFromRule() - Method in interface nxopen.annotations.BaseNote
-
Updates the specified note from the KF rule.
- updateFromSpreadsheet() - Method in interface nxopen.motion.LoadTransferControl
-
Moves animation to cell position selected in spreadsheet
License requirements: mechanisms ("MECHANISMS")
.
- updateFromSpreadsheet() - Method in interface nxopen.motion.SpreadsheetRunControl
-
SpreadsheetRun update from spreadsheet
License requirements: mechanisms ("MECHANISMS")
.
- updateGeometryDependencies(CAMObject[]) - Method in interface nxopen.cam.CAMSetup
-
Update geometry dependencies of selected objects
License requirements: cam_base ("CAM BASE")
.
- updateGeometryDisplay() - Method in interface nxopen.Sketch
-
Updates the geometry display without updating the sketch
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- updateGeometryDisplay(SmartObject[]) - Method in interface nxopen.Sketch
-
Updates the geometry display of given set of geoms without updating the sketch
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- updateGuideLineDirection(MWDesignGuideLinesBuilder.DirectionType, Curve) - Method in interface nxopen.tooling.MWDesignGuideLinesBuilder
-
Update the guide line with a new direction.
- updateHiddenEdge() - Method in interface nxopen.preferences.PartVisualizationVisual
-
Returns the update hidden edges flag for working part.
- updateHoleData(int, double, Point3d, boolean, boolean) - Method in interface nxopen.tooling.FastenerAssy
-
Updates the hole data
License requirements: None.
- updateHolePostion(int, Point3d, Point3d, Point3d, double, double, double) - Method in interface nxopen.tooling.FastenerAssy
-
Updates the hole positon for position method
License requirements: None.
- updateImage(String, String) - Method in interface nxopen.layout2d.ComponentDefinition
-
Updates definition preview
License requirements: nx_layout ("NX Layout")
.
- updateInApplyStatus(int) - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder
-
Method to update the Apply status of the command.
- updateInputMeshDataToSolver() - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
Updates the mesh elements to solver.
- updateInputReferences() - Method in interface nxopen.features.PartModule
-
Updates inputs in the given linked part module
License requirements: usr_defined_features ("USER DEFINED FEATURES")
.
- updateInputSection() - Method in interface nxopen.SketchPatternBuilder
-
This function updates the pattern constraint according to the data set in pattern section
License requirements: None.
- updateIpw() - Method in interface nxopen.cam.TurningOperationBuilder
-
Returns the update IPW mode
License requirements: None.
- updateIsoparametricCurves() - Method in interface nxopen.features.IsoparametricCurvesBuilder
-
Sets key points that are selected or will be moved
License requirements: solid_modeling ("SOLIDS MODELING")
.
- updateJointAfterLimitsChange() - Method in interface nxopen.weld.WeldJointBuilder
-
Updates the joint curve after the limits change.
- updateJointAfterLimitsChange(DieLimitsBuilder) - Method in interface nxopen.weld.WeldJointBuilder
-
Updates the joint curve after the limits change.
- updateJointType(WeldJointBuilder.WeldTypes) - Method in interface nxopen.weld.WeldJointBuilder
-
- updateJtBrep(Tag) - Method in interface nxopen.uf.UFPart
-
- updateJtFacets(Tag) - Method in interface nxopen.uf.UFPart
-
- updateLawSpine() - Method in interface nxopen.features.SilhouetteFlangeBuilder
-
Update the spine curve in length/angle/radius laws.
- updateLayout() - Method in interface nxopen.formboard.FormboardLayoutBuilder
-
Updates the orientation and placement of the formboard geometry to match
the current set of layout options stored within the builder.
- updateLineAngleVec(Vector3d) - Method in interface nxopen.formboard.ShapeSegmentBuilder
-
License requirements: routing_harness ("Routing Harness")
.
- updateLineFontObjects(boolean) - Method in interface nxopen.preferences.VisualizationLine
-
Updates the UI after line font is changed
License requirements: None.
- updateList(int, int) - Method in interface nxopen.cam.StockPerPassBuilder
-
Update list dependent on rough and finish passes number.
- updateListingWindow() - Method in interface nxopen.uf.UFUi
-
- updateListObjectCustomization(Tag) - Method in interface nxopen.uf.UFCam
-
- updateLocationLabel(boolean, Point) - Method in interface nxopen.features.ConcaveFacesBuilder
-
The PMI as a location label created or edited at the point selected on a face.
- updateLock() - Method in interface nxopen.MWUpdate
-
Utility function for locking update
License requirements: None.
- updateLockRegionGeometry(NXObject) - Method in interface nxopen.features.StudioXformBuilder
-
- updateLockRegionGeometry(NXObject) - Method in interface nxopen.features.StudioXformBuilderEx
-
Update lock region geometry with current geometry
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- updateLoopsAndCopies() - Method in interface nxopen.SketchOffsetBuilder
-
This function will update the offset after curves are selected.
- updateManager() - Method in interface nxopen.Session
-
Returns the
Update
belonging to this session
Created in NX3.0.0
- updateMaterialDisplayOfGeometry(int, Tag) - Method in interface nxopen.uf.UFDisp
-
- updateMaterialProperties() - Method in interface nxopen.PhysicalMaterial
-
Re-synchronizes a material with its definition.
- updateMaterialsInLibrary(PhysicalMaterial[], String[], String) - Method in interface nxopen.PhysicalMaterialCollection
-
Updates the materials in a material library file.
- updateMaterialsInPartPaletteEntry() - Method in interface nxopen.display.CgfxMattexBuilder
-
- updateMeasures(ResultMeasure[]) - Method in interface nxopen.cae.ResultMeasureCollection
-
Update list of result measures.
- updateModel() - Method in interface nxopen.features.shipdesign.StandardPartFrameworkBuilder
-
Updates all standard parts
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.
- updateModel(boolean, boolean) - Method in interface nxopen.tooling.SpreadsheetData
-
Update the associated objects according to the spreadsheet data with the options
License requirements: None.
- updateModel(Tag, UFFacet.Parameters) - Method in interface nxopen.uf.UFFacet
-
- updateMpvData() - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
Update the MPV data used in performing analysis in Molded Part Validation whenever there are changes in data on dialog.
- updateNCCode(String[]) - Method in interface nxopen.mechatronics.RuntimeNCBuilder
-
This method is used to update NC code.
- updateNodeMatchings() - Method in interface nxopen.cae.CorrelSolution
-
Update correlation node matchings
License requirements: nx_correl_base ("FE Correlation")
.
- updateNow() - Method in interface nxopen.MassPropertiesBuilder
-
This will update the weight property of the selected objects immediately.
- updateOnConstraintPlane() - Method in interface nxopen.features.PolylineBuilder
-
Updates polyline based on constraint plane
License requirements: features_modeling ("FEATURES MODELING")
.
- updateOnConstraintPlane() - Method in interface nxopen.features.StudioSplineBuilderEx
-
Updates spline based on constraint plane
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT")
.
- updateOnCoordinateSystem() - Method in interface nxopen.geometricutilities.RectangularFrameBuilder
-
Updates the frame based on coordinate system.
- updateOnDirectionAtPointReversal() - Method in interface nxopen.geometricutilities.BridgeCurveConnectivity
-
- updateOnEndVectorReversal() - Method in interface nxopen.features.BridgeCurveBuilderEx
-
Updates the builder based on end vector sense
License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_1 ("basic freeform modeling")
.
- updateOneView(Tag, Tag) - Method in interface nxopen.uf.UFDraw
-
- updateOnOrientationVectorReversal() - Method in interface nxopen.features.TextBuilder
-
Updates the builder based on orientation vector sense
License requirements: solid_modeling ("SOLIDS MODELING")
.
- updateOnOriginMove() - Method in interface nxopen.geometricutilities.TransformerData
-
Updates tool upon movement of the point representing origin.
- updateOnPathDimPath(StyledCornerBuilder.CurveControlTypes, int) - Method in interface nxopen.features.StyledCornerBuilder
-
Gets the path in current position and sets it in builder.
- updateOnReferenceVectorReversal() - Method in interface nxopen.geometricutilities.StyledSweepReferenceMethodBuilder
-
Updates the builder based on reference vector sense
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- updateOnSave() - Method in interface nxopen.MassPropertiesBuilder
-
Returns the update on save option.
- updateOnSectionPlane() - Method in interface nxopen.features.TextBuilder
-
Updates the builder based on section plane
License requirements: solid_modeling ("SOLIDS MODELING")
.
- updateOption() - Method in interface nxopen.features.MidSurfaceByFacePairsBuilder
-
Returns the immediate update
License requirements: None.
- updateOptions() - Method in interface nxopen.tooling.ConcurrentDesignManagementBuilder
-
Returns the update type.
- updateOriginalMatchSurface() - Method in interface nxopen.features.MatchEdgeBuilder
-
Update original match surface geometry
License requirements: features_modeling ("FEATURES MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- updateOutputReferences() - Method in interface nxopen.features.PartModule
-
Updates outputs in the given part module
License requirements: usr_defined_features ("USER DEFINED FEATURES")
.
- updateOverlayingAxisLimitsAutomatically() - Method in interface nxopen.cae.xyplot.Preference
-
Returns the status whether to update the axis limits automatically when overlaying records at next time
License requirements: None.
- updateParameters() - Method in interface nxopen.cam.InspectionPathBuilder
-
Update Inspection path based on selected feature.
- updateParameters() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
Updates Inspection tolerance parameters based on selected annotation.
- updateParams() - Method in interface nxopen.cam.InspectionMeasurePointBuilder
-
Update measured point parameters based on selected point.
- updatePartData() - Method in interface nxopen.tooling.AddReusablePart
-
Updates the part data of a reusable component
License requirements: None.
- updatePartingLines() - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder
-
Update parting lines after traversing parting lines.
- updatePartingNavigator() - Method in interface nxopen.tooling.MWPartingManagerBuilder
-
Update the Parting Navigator.
- updateParts(int, Tag[]) - Method in interface nxopen.uf.UFWave
-
- updatePath() - Method in interface nxopen.cam.InspectionPathBuilder
-
Update path
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- updatePath() - Method in interface nxopen.weld.WeldBeadPathBuilder
-
Computes the preview path, and evaluation information for indicating desired face side of the preview path.
- updatePathCurve() - Method in interface nxopen.routing.DuctReinforcementBuilder
-
The path curve that is used to specify perpendicular reinforcement defining points.
- updatePathCurve() - Method in interface nxopen.routing.OverstockBuilder
-
Update the path curve that is used to specify overstock defining points
when any segment is selected or deselected.
- UpdatePathData() - Constructor for class nxopen.weld.WeldBeadPathBuilder.UpdatePathData
-
- updatePending() - Method in interface nxopen.preferences.SessionModeling
-
Returns the update pending option.
- updatePlacementObj(TaggedObject, Point3d) - Method in interface nxopen.routing.PlacePartBuilder
-
Update the loaded part with a new placement location and object.
- updatePlyDraping(LaminatePly[]) - Method in interface nxopen.cae.LaminateGlobalLayupMgr
-
Compute draping for all the selected plies.
- updatePmiDisplay() - Method in interface nxopen.annotations.PmiFilter
-
Updates the PMI display in the associated views of the filter
License requirements: geometric_tol ("GDT")
.
- updatePolePositions(int, int[], Point3d[]) - Method in interface nxopen.geometricutilities.ControlPoleManagerData
-
Updates pole positions
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- updatePosition() - Method in interface nxopen.tooling.PiercingInsertBuilder
-
Update position.
- updatePostStatusFlag(boolean) - Method in interface nxopen.features.AOCSBuilder
-
Update the post-process status flag.
- updatePreviewSurface() - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder
-
Update the preview surface for the bounded plane or enlarged surface.
- updateProfileCurve() - Method in interface nxopen.features.StyledBlendBuilder
-
Updates the profile curve for Profile type.
- updateR1ToolTipJunction(NXObject, int) - Method in interface nxopen.cam.ManageToolPartBuilder
-
Updates the r1 tool tip junction and related tracking point (1..9)
License requirements: None.
- updateRadialPivot(int, Point3d, int, double) - Method in interface nxopen.formboard.ShapeSegmentBuilder
-
License requirements: routing_harness ("Routing Harness")
.
- updateRadiusFaces() - Method in interface nxopen.features.ConcaveFacesBuilder
-
The targeted faces updated according to the given radius range, number of sample point and group interval changing.
- updateRadiusLawSpine() - Method in interface nxopen.features.StyledBlendBuilder
-
Updates the spine in radius laws.
- updateRayTracedDisplay() - Method in interface nxopen.display.RayTracedStudioBuilder
-
Update the Ray Traced Studio display.
- updateRecipe(FluidDomainRecipe) - Method in interface nxopen.cae.FluidDomainCollection
-
Updates a fluid domain recipe
License requirements: nx_adv_fluid_mod ("NX Advanced Fluid Modeling")
.
- updateReferenceParameters(NXObject) - Method in interface nxopen.cam.InspectionPathBuilder
-
Update relative measurement geometry based on selected reference feature.
- updateReferences(boolean) - Method in interface nxopen.features.shipdesign.StandardPartItemBuilder
-
Updates and relinks the external references. bToUpdateGeometry is used to decide if the input
geometries need to be recalculated.
- updateReferenceSheet(boolean) - Method in interface nxopen.weld.JointmarkBuilder
-
Prepares a Reference Sheet for placing Jointmark features.
- updateRegion() - Method in interface nxopen.tooling.MWSearchRegionBuilder
-
Update the region with the new region faces and seed faces
License requirements: None.
- updateRegions() - Method in interface nxopen.SketchAssociativeTrimBuilder
-
The regions are recreated and updated to reflect the change in the boundary curves
License requirements: solid_modeling ("SOLIDS MODELING")
.
- updateResetData() - Method in interface nxopen.features.StyledBlendBuilder
-
Set necessary builder data.
- updateResultsForSolution(SimSolution, boolean) - Method in interface nxopen.cae.CorrelSolution
-
Update results for correlation solution
License requirements: nx_correl_base ("FE Correlation")
.
- updateResultsForSolution(SimSolution, boolean) - Method in interface nxopen.cae.PreTestSolution
-
Update results for pre-test solution
License requirements: nx_correl_base ("FE Correlation")
.
- updateReusableComponent() - Method in interface nxopen.tooling.AddReusablePart
-
Updates the part data for a reusable component, this is mainly used to update parameter for a reusable component
License requirements: None.
- updateReusablePocket() - Method in interface nxopen.tooling.AddReusablePart
-
Updates the pocket for a reusable component
License requirements: None.
- updateReverseMap() - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder
-
Updates reverse map
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- updateReverseMap() - Method in interface nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder
-
Updates reverse map.
- updateRotationAngle(double) - Method in interface nxopen.formboard.OrientBranchBuilder
-
- updateRotationAngle(double) - Method in interface nxopen.routing.ClockPartBuilder
-
Suppress the constraind applied to the selected nxopen.routing.Port
License requirements: routing_base ("Routing Basic")
Created in NX7.5.0
- updateScenario() - Method in interface nxopen.uf.UFSf
-
- updateScope() - Method in interface nxopen.Sketch
-
Returns the current update scope.
- updateSecondEdgeFace(DisplayableObject, Point3d) - Method in interface nxopen.geometricanalysis.SurfaceContinuityAnalysisBuilder
-
User selects or deselects second edge or face, update builder m_edge2, m_face2
License requirements: gateway ("UG GATEWAY")
.
- updateSecondSection(Section) - Method in interface nxopen.weld.WeldPointBuilder
-
Update second section
License requirements: ugweld ("UG WELD")
.
- updateSection(Curve) - Method in interface nxopen.die.AddendumSectionBuilder
-
- updateSectionAtIndex(int) - Method in interface nxopen.geometricutilities.AlignmentMethodBuilder
-
Update section at given index
License requirements: solid_modeling ("SOLIDS MODELING")
.
- updateSectionAttributes(Curve) - Method in interface nxopen.die.AddendumSectionBuilder
-
Updates the section attributes.
- updateSectionCuts(Update.Option) - Method in interface nxopen.display.DynamicSection
-
Updates the section-cuts (curves) associated with the dynamic
section object if they are out-of-date.
- updateSectionData(Section) - Method in interface nxopen.features.AOCSBuilder
-
Update section data for offset
License requirements: solid_modeling ("SOLIDS MODELING")
.
- updateSectionsAfterConstraintChange() - Method in interface nxopen.die.AddendumSectionBuilder
-
Called to update the section when constraint curve or constraint surface is changed.
- updateSegment(boolean, Curve, AddendumSectionBuilder.SegmentType, double, double) - Method in interface nxopen.die.AddendumSectionBuilder
-
Updates length or angle value of a segment.
- updateSegmentAutoCreateInfo() - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder
-
Method to update the auto create info for the selected parting segment
License requirements: None.
- updateSelectedFacesInfo() - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
Update the information of the seleted faces in the thickness calculation database for inspecting thickness results.
- updateSelObjectsVector() - Method in interface nxopen.routing.TransformPathBuilder
-
Adds selected objects into vector during selection
License requirements: routing_base ("Routing Basic")
.
- updateSensors(InspectionSetup, InspectionGroup, InspectionGroup, InspectionGroup, InspectionGroup, String) - Method in interface nxopen.cam.InspectionPathBuilder
-
Update sensor definitions
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- updateSession() - Method in interface nxopen.assemblies.RelinkerBuilder
-
Updates the session.
- updateSession() - Method in interface nxopen.uf.UFWave
-
- updateSessionWithBreakDelayed() - Method in interface nxopen.assemblies.RelinkerBuilder
-
Updates the session without immediately breaking wave links or inter part expressions.
- updateShapeLawSpine(boolean) - Method in interface nxopen.features.StyledBlendBuilder
-
Updates the spine in shape laws.
- updateSharpEdgesInformation() - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
Update the sharp edges information based on the new sharp angle limit which has been changed by the user.
- updateSheetEdges() - Method in interface nxopen.features.GuidedExtensionBuilderEx
-
Updates the information for the sheet edges of the selected section whenever sheet edges are selected or de-selected.
- updateSheetEdges() - Method in interface nxopen.tooling.GuidedExtensionBuilder
-
Updates the information for the sheet edges of the selected section whenever sheet edges are selected or de-selected.
- UpdateShipLibrary - Interface in nxopen.features.shipdesign
-
Represents a update ship library feature
To create or edit an instance of this class, use
UpdateShipLibraryBuilder
Created in NX5.3.0
- UpdateShipLibraryBuilder - Interface in nxopen.features.shipdesign
-
- UpdateShipLibraryBuilder.ShipLibAssemblyOption - Class in nxopen.features.shipdesign
-
Assembly update library options
- UpdateShipLibraryBuilder.ShipLibOptionType - Class in nxopen.features.shipdesign
-
Ship Library Types
Note the weld along edge option is no longer used in NX7.5, and will be removed in NX8.
- updateSimDisplayOptions() - Method in interface nxopen.cam.InspectionCollisionAvoidanceBuilder
-
Updates the Sim Display Options to match changes made in the Collision Avoidance Dialog
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- updateSingleObjectCustomization(Tag) - Method in interface nxopen.uf.UFCam
-
- updateSketch() - Method in interface nxopen.features.shipdesign.QualifySketchBuilder
-
Updates sketch.
- updateSketch(Tag) - Method in interface nxopen.uf.UFSket
-
- updateSketchOnly() - Method in interface nxopen.preferences.SessionSketch
-
Returns the update sketch only preference.
- updateSmallRadiusFacesInformation() - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
Update the small radius faces information based on the new range limits of the radius which has been changed by the user.
- updateSpine() - Method in interface nxopen.geometricutilities.MultiTransitionLawBuilder
-
Update the builder based on current spine
License requirements: solid_modeling ("SOLIDS MODELING") OR free_form_modeling ("FREE-FORM MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- updateSpine() - Method in interface nxopen.geometricutilities.NonInflectingLawBuilder
-
Update the builder based on current spine
License requirements: solid_modeling ("SOLIDS MODELING") OR free_form_modeling ("FREE-FORM MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- updateSpine() - Method in interface nxopen.geometricutilities.SShapedLawBuilder
-
Update the builder based on current spine
License requirements: solid_modeling ("SOLIDS MODELING") OR free_form_modeling ("FREE-FORM MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- updateSpineCurve() - Method in interface nxopen.features.StyledBlendBuilder
-
Updates the spine curve.
- updateSplinePoint(int, Point3d, boolean) - Method in interface nxopen.formboard.ShapeSegmentBuilder
-
License requirements: routing_harness ("Routing Harness")
.
- updateSplitPositions(int, Point3d[]) - Method in interface nxopen.features.subdivision.SubdivisionSplitFaceBuilder
-
Update split positions.
- updateSpreadsheetData(String[], String[], int[]) - Method in interface nxopen.features.shipdesign.StandardPartFrameworkBuilder
-
Updates the parameter values which are defined in the parameter spreadsheet.
- updateSpreadsheetData() - Method in interface nxopen.tooling.ReusableObjectPasteBuilder
-
Updates the spreadsheet data according to the expressions in part
License requirements: None.
- updateSpreadsheetDataNoUpdate(String[], String[], int[]) - Method in interface nxopen.features.shipdesign.StandardPartFrameworkBuilder
-
Updates the parameter values which are defined in the parameter spreadsheet but not update the standard
parts.
- updateStackPosition(int, int, FastenerAssy.StackTypeMethod, double) - Method in interface nxopen.tooling.FastenerAssy
-
Updates the fastener assembly after changing stacks or changing stack properties
License requirements: None.
- updateStatus(NXObject[], Component[], boolean) - Method in interface nxopen.motion.PhysicsConversionBuilder
-
The data update accordingly.
- updateStatus - Variable in class nxopen.Part.UpdateStatusReportData
-
list of affected features
- UpdateStatusReportData() - Constructor for class nxopen.Part.UpdateStatusReportData
-
- updateStockCharacteristicValues(CharacteristicList) - Method in interface nxopen.preferences.RoutingCharacteristics
-
Replaces any stored stock characteristics with the input values, adds any new
values in the input list.
- updateStockInformation(NXObject) - Method in interface nxopen.features.shipdesign.EditStockBuilder
-
Update stock information
License requirements: nx_ship_basic ("Ship Basic Design")
.
- updateStructure(Component[], int) - Method in interface nxopen.assemblies.Component
-
Update the assembly structure for this assembly in the
context of the displayed part to the specified number of
levels, ignoring components already processed by previous
calls.
- updateStructure(Component[], int, boolean) - Method in interface nxopen.assemblies.Component
-
Update the assembly structure for this assembly in the
context of the displayed part to the specified number of
levels.
- updateStructure(Tag) - Method in interface nxopen.uf.UFFltr
-
- UpdateStructureBuilder - Interface in nxopen.assemblies
-
- updateStructureOnExpand() - Method in interface nxopen.preferences.SessionAssemblies
-
Returns the update structure on assembly tree expand option
License requirements: None.
- updateSurfacePostPoleEditing() - Method in interface nxopen.features.EdgeSymmetryBuilder
-
- updateSymbolGeometry(Point3d, double, double) - Method in interface nxopen.annotations.BaseCustomSymbol
-
Sets the origin, scale and angle for a custom symbol instance
and updates the leaders (if any) as needed.
- updateTabnot(Tag) - Method in interface nxopen.uf.UFDraw
-
- updateTangentCurve1() - Method in interface nxopen.features.StyledBlendBuilder
-
Updates the first tangent curve for Curve type.
- updateTangentCurve2() - Method in interface nxopen.features.StyledBlendBuilder
-
Updates the second tangent curve for Curve Type.
- updateTargetSelectionOnPointEditing() - Method in interface nxopen.features.FitCurveBuilder
-
Updates target selection by replacing original point by edited point.
- updateTemplates() - Method in interface nxopen.AttributeTemplatesBuilder
-
Update templates in the part from the external catalog defined in customer defaults.
- updateThickness(boolean) - Method in interface nxopen.features.shipdesign.StandardPartFrameworkBuilder
-
- updateThicknessDirection(boolean) - Method in interface nxopen.features.shipdesign.StandardPartFrameworkBuilder
-
Updates the standard part thickness direction.
- updateThreadParameters(Feature) - Method in interface nxopen.cam.fbm.ThreadFeatureGeometry
-
Update the feature thread parameters
License requirements: cam_base ("CAM BASE")
.
- updateTime() - Method in interface nxopen.mechatronics.OPCClientBuilder
-
Returns the update time.
- updateTireBodyFeature() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
Update the tire body feature in the tire body output part file.
- updateToolTipJunction(NXObject, int, int) - Method in interface nxopen.cam.ManageToolPartBuilder
-
Updates the tool tip junction.
- updateTopBottomStacks(int, FastenerAssy.SelectionObjectMethod, boolean, NXObject) - Method in interface nxopen.tooling.FastenerAssy
-
Updates fastener assembly according to the new extends
License requirements: None.
- updateTrackingProperties() - Method in interface nxopen.annotations.PmiTrackingPropertiesBuilder
-
Updates the Inherit PMI properties tracking list
License requirements: drafting ("DRAFTING")
.
- updateTrackingPropertiesFromXml() - Method in interface nxopen.preferences.SessionPmi
-
Update tracking properties
License requirements: None.
- updateTransitionPoints() - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder
-
Update transition points after editing guide lines.
- updateUndefinedFaces(int) - Method in interface nxopen.tooling.MWDefineRegionsBuilder
-
Update the undefined faces
License requirements: None.
- updateUnsewnBodiesNameAttribute(TaggedObject, Face[]) - Method in interface nxopen.tooling.MWDefineRegionsBuilder
-
Update name attribute for the unsew bodies of the cavity and core regions
License requirements: None.
- updateUserGroupsFromSimPart(SimPart) - Method in interface nxopen.cae.Post
-
Synchronize the Groups in Post-Processing with those in the Simulation Part
License requirements: nx_masterfem ("Finite Element Modeling")
.
- updateView(Tag) - Method in interface nxopen.uf.UFView
-
- updateViewBreaks(DraftingView) - Method in interface nxopen.drawings.DraftingViewCollection
-
Log all view breaks of the view for update
License requirements: drafting ("DRAFTING")
.
- updateViews(DraftingViewCollection.ViewUpdateOption) - Method in interface nxopen.drawings.DraftingViewCollection
-
Updates drafting views in the part determined by an update option.
- updateViews(DraftingViewCollection.ViewUpdateOption, DrawingSheet) - Method in interface nxopen.drawings.DraftingViewCollection
-
Updates drafting views in a sheet determined by an update option.
- updateViews(DraftingView[]) - Method in interface nxopen.drawings.DraftingViewCollection
-
Updates the drafting views.
- updateViews(String, int, String) - Method in interface nxopen.uf.UFDrf
-
- UpdateViewsBuilder - Interface in nxopen.drawings
-
- updateViewWithoutLwData() - Method in interface nxopen.preferences.PartDrafting
-
Returns the option specifying the action when missing, incomplete or invalid lightweight
bodies are found during view create or update
License requirements: None.
- updateWall1() - Method in interface nxopen.features.StyledBlendBuilder
-
Updates the first wall.
- updateWall2() - Method in interface nxopen.features.StyledBlendBuilder
-
Updates the second wall.
- updateWithDerivedDatum() - Method in interface nxopen.weld.DatumCommonBuilder
-
Initialize the builder with the inputs from an existing datum.
- updateWithReferenceDatum() - Method in interface nxopen.weld.DatumSurfaceBuilder
-
Initialize the builder with the inputs from an existing datum surface locator.
- updateWorkView() - Method in interface nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder
-
Update work view with a given view matrix
License requirements: None.
- updateWorkView() - Method in interface nxopen.geometricanalysis.SurfaceIntersectionBuilder
-
Update work view with a given view matrix
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- updateXformObject(NXObject) - Method in interface nxopen.features.StudioXformBuilder
-
- updOutOfDateViews(Tag) - Method in interface nxopen.uf.UFDraw
-
- upDownCutting() - Method in interface nxopen.cam.MillCutParameters
-
Returns the up down cutting
License requirements: None.
- UpDownCutting - Interface in nxopen.cam
-
- upercentage() - Method in interface nxopen.features.PointSetFacePercentageBuilder
-
Returns the u percentage expression.
- upercentage() - Method in interface nxopen.geometricutilities.BridgeCurveConnectivity
-
Returns the U coordinate percentage indicating location on the face where bridge curve is connected
License requirements: None.
- upercentEnd() - Method in interface nxopen.features.BridgeCurveBuilder
-
- upercentStart() - Method in interface nxopen.features.BridgeCurveBuilder
-
- uPeriod - Variable in class nxopen.uf.UFModeling.AskFacePeriodicityData
-
- UPFROM_BOTTOM_LEFT - Static variable in class nxopen.drawings.DrawingRegionBuilder.RegionGrowthDirection
-
- UPFROM_BOTTOM_RIGHT - Static variable in class nxopen.drawings.DrawingRegionBuilder.RegionGrowthDirection
-
- upgradeLegacyFeature(int, Tag[], int, Tag[], UFGdt.FeatureType, double[], UFGdt.Description) - Method in interface nxopen.uf.UFGdt
-
- UpgradeStatus() - Constructor for class nxopen.uf.UFAssem.UpgradeStatus
-
- UpgradeStatus(boolean, int, String[], int[]) - Constructor for class nxopen.uf.UFAssem.UpgradeStatus
-
- upgradeToInstances(Tag, int, Tag[], boolean, boolean) - Method in interface nxopen.uf.UFAssem
-
- upOffsetValue() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
Returns the expression containing the offset value of the up section(at 90 degrees).
- UPPER - Static variable in class nxopen.cae.optimization.Limit
-
Upper
- UPPER - Static variable in class nxopen.cam.InspectionMethodBuilder.ProfileDispositionTypes
-
Upper
- UPPER - Static variable in class nxopen.die.DrawBeadBuilder.MaleBeadPositionTypes
-
Attach the male bead to the upper die casting.
- upper() - Method in interface nxopen.features.ConcaveFacesBuilder
-
Returns the upper limit of the maximum concave range.
- UPPER - Static variable in class nxopen.optimization.DesignStudyBuilder.DesignStudyConstraintLimitType
-
Upper limit type
- UPPER - Static variable in class nxopen.optimization.OptimizationBuilder.OptimizationConstraintLimitType
-
Upper limit
- UPPER - Static variable in class nxopen.tooling.DieDesPierceInsertBuilder.Direction
-
- UPPER - Static variable in class nxopen.weld.JointExitBuilder.Positions
-
the upper position
- UPPER_AND_LOWER_LIMIT - Static variable in class nxopen.AttributeTemplatesBuilder.ConstraintOptions
-
This template has a lower limit and an upper limit.
- UPPER_ARM - Static variable in class nxopen.HumanData.SegmentScalingType
-
Indicate scaling of upper_arm
- UPPER_CASE - Static variable in class nxopen.routing.BranchPathNumberingBuilder.Sequence
-
A, B, C,.....
- UPPER_CHAMFER - Static variable in class nxopen.weld.JointExitBuilder.Positions
-
the upper chamfer position
- UPPER_LEG - Static variable in class nxopen.HumanData.SegmentScalingType
-
Indicate scaling of upper_leg
- UPPER_LIMIT - Static variable in class nxopen.AttributeTemplatesBuilder.ConstraintOptions
-
This template has an upper limit but no lower limit.
- upperBase() - Method in interface nxopen.die.TrimFlangeDieAssistantBuilder
-
Returns the upper base
License requirements: None.
- upperBound() - Method in interface nxopen.cae.ModelUpdateDesignVariablesRapidCreateBuilder
-
Returns the upper bound
License requirements: None.
- upperBound() - Method in interface nxopen.visualreporting.GroupLabel
-
Returns the upper bound value of the
GroupLabel
(if it is being grouped by range)
License requirements: None.
- upperBoundFreq() - Method in interface nxopen.cae.LaminateRandomEventBuilder
-
- upperBoundFrequency() - Method in interface nxopen.cae.LaminateDynamicEventBuilder
-
Returns the upper bound freq
License requirements: None.
- upperBoundMultiplier() - Method in interface nxopen.cae.ModelUpdateOptionsBuilder
-
Returns the upper bound multiplier
License requirements: None.
- upperBumperAngle() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the angle that is used to determine the upper limit of the bumper.
- UPPERCASE_X - Static variable in class nxopen.annotations.ChamferSeparatorType
-
Specifies X
- upperDeckOffsetSheet() - Method in interface nxopen.tooling.DieDesignLowerBinderBuilder
-
Returns the upper deck offset sheet used in Lower Binder, it is optional
License requirements: ug_die_design ("Die Design")
.
- upperDeckRelief() - Method in interface nxopen.tooling.DieDesignLowerBinderBuilder
-
Returns the upper deck relief
License requirements: ug_die_design ("Die Design")
.
- upperDeckReliefSheet() - Method in interface nxopen.tooling.DieDesignLowerBinderBuilder
-
Returns the upper deck relief sheet used in Lower Binder, it is optional
License requirements: ug_die_design ("Die Design")
.
- upperDeckThickness() - Method in interface nxopen.tooling.DieDesignLowerBinderBuilder
-
Returns the upper deck thickness
License requirements: ug_die_design ("Die Design")
.
- upperDepth - Variable in class nxopen.uf.UFCamgeom.CustomPoint
-
- upperDiameter - Variable in class nxopen.cam.HolderSectionBuilder.AllParametersData
-
the upper diameter
- upperDMS() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
Returns the string for anglb upper DMS
License requirements: None.
- upperGuideOffset() - Method in interface nxopen.cam.WedmCutParameters
-
Returns the upper guide offset
License requirements: cam_base ("CAM BASE")
.
- upperLeft - Variable in class nxopen.uf.UFDrf.AskAnnotationTextBoxData
-
- upperLegPositions() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the upper leg impact locations.
- upperLegZonesOutputLayer() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the layer that will be used for the upper leg impact zone.
- upperLimit() - Method in interface nxopen.cae.optimization.DAODesignVariableBuilder
-
Returns the upper limit value
License requirements: None.
- upperLimit() - Method in interface nxopen.cam.TurnRoughFinishLocalReturnBuilder
-
Returns the upper limit
License requirements: None.
- upperLimit() - Method in interface nxopen.mechatronics.HingeJointBuilder
-
Returns the upper limit.
- upperLimit() - Method in interface nxopen.mechatronics.SlidingJointBuilder
-
Returns the upper limit.
- upperLimit() - Method in interface nxopen.motion.JointDefine
-
- upperLimit() - Method in interface nxopen.sim.KinematicAxisBuilder
-
Returns the upper limit
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- upperLimit - Variable in class nxopen.uf.UFSim.AskDegofData
-
- upperLimitAngleExpression() - Method in interface nxopen.motion.JointDefine
-
Returns the upper limit angular expression.
- upperLimitExpression() - Method in interface nxopen.motion.JointDefine
-
Returns the upper limit expression.
- upperLimitPlane() - Method in interface nxopen.die.FillAreaBuilder
-
Returns the plane used to trim the fill area solid.
- upperLimitPlane() - Method in interface nxopen.features.shipdesign.ShellExpansionBuilder
-
Returns the upper limit plane
License requirements: None.
- upperLimitSheet() - Method in interface nxopen.die.FillAreaBuilder
-
Returns the sheet (such as the sheet metal) used to trim the fill area solid.
- upperLimitType() - Method in interface nxopen.die.FillAreaBuilder
-
Returns the value that determines whether the upper limit is defined by a sheet or plane.
- upperMargin() - Method in interface nxopen.features.shipdesign.InverseBendingLinesBuilder
-
Returns the upper margin on the profile.
- upperMetricToleranceValue() - Method in interface nxopen.annotations.Dimension
-
Returns a setting to control the metric upper tolerance value of a dimension.
- upperPadParms() - Method in interface nxopen.die.TrimFlangeDieAssistantBuilder
-
TODO: fill in a description for this
License requirements: ug_die_design ("Die Design")
.
- upperPlane() - Method in interface nxopen.cam.WedmBasedGeomBuilder
-
Returns the Upper Plane
License requirements: cam_base ("CAM BASE")
.
- upperPlane() - Method in interface nxopen.features.shipdesign.ExpansionDrawingBuilder
-
Returns the upper plane
License requirements: None.
- upperPlane() - Method in interface nxopen.features.vehicledesign.VisionPlaneBuilder
-
Returns the upper plane option that determines whether to create upper plane or not.
- upperPlaneBuilder() - Method in interface nxopen.cam.WedmCutParameters
-
Returns the upper_plane builder
License requirements: cam_base ("CAM BASE")
.
- upperRadius() - Method in interface nxopen.die.ThroatChildBuilder
-
Returns the radius to apply to the upper corner of the throat cavity.
- upperRadius() - Method in interface nxopen.features.AnalyzePocketBuilder
-
Returns the upper radius defines the radius of blend on the upper part of T Cutter.
- upperRadius() - Method in interface nxopen.features.BlendPocketBuilder
-
Returns the upper radius defines the radius of blend on the upper part of T Cutter.
- upperRoofExterior() - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarWizardBuilder
-
Returns the upper roof exterior geometry.
- upperRoofExterior() - Method in interface nxopen.features.vehicledesign.HeadImpactUpperRoofWizardBuilder
-
Returns the upper roof exterior geometry.
- upperRoofFeature() - Method in interface nxopen.features.vehicledesign.HeadImpactBuilder
-
Returns the upper roof feature for this head impact study.
- upperRoofInterior() - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarWizardBuilder
-
Returns the upper roof interior geometry.
- upperRoofInterior() - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarWizardBuilder
-
Returns the upper roof interior geometry.
- upperRoofInterior() - Method in interface nxopen.features.vehicledesign.HeadImpactFrontHeaderWizardBuilder
-
Returns the upper roof interior geometry.
- upperRoofInterior() - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarWizardBuilder
-
Returns the upper roof interior geometry.
- upperRoofInterior() - Method in interface nxopen.features.vehicledesign.HeadImpactOtherRailWizardBuilder
-
Returns the upper roof interior geometry.
- upperRoofInterior() - Method in interface nxopen.features.vehicledesign.HeadImpactRearHeaderWizardBuilder
-
Returns the upper roof interior geometry.
- upperRoofInterior() - Method in interface nxopen.features.vehicledesign.HeadImpactRPillarWizardBuilder
-
Returns the upper roof interior geometry.
- upperRoofInterior() - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailWizardBuilder
-
Returns the upper roof interior geometry.
- upperRoofInterior() - Method in interface nxopen.features.vehicledesign.HeadImpactUpperRoofWizardBuilder
-
Returns the upper roof interior geometry.
- upperSource() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
Returns the Upper Value Source
License requirements: None.
- upperText() - Method in interface nxopen.annotations.ArbitraryTargetData
-
Returns the upper text.
- upperText() - Method in interface nxopen.annotations.IArbitraryTarget
-
Returns the target upper text.
- upperText() - Method in interface nxopen.annotations.IdSymbolBuilder
-
Returns the upper text
The text displayed in the upper portion of the divided symbol
In case Quadrant Circle symbol, the upper text is placed in
the upper left quadrant just above the horizontal dividing line.
- upperTextText() - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder
-
Returns the upper text text
License requirements: None.
- upperTextType() - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder
-
Returns the upper text enum
License requirements: None.
- upperTol - Variable in class nxopen.uf.UFGdt.DepthTolerance
-
- upperTolerance() - Method in interface nxopen.cam.ProbeToleranceParametersBuilder
-
Returns the upper tolerance
License requirements: None.
- upperToleranceDeg - Variable in class nxopen.uf.UFDrf.DimensionPreferences
-
- upperToleranceDeg - Variable in class nxopen.uf.UFDrf.DimensionPreferences1
-
- upperToleranceDegrees() - Method in interface nxopen.annotations.DimensionStyleBuilder
-
Returns the upper angular tolerance in degrees
License requirements: None.
- upperToleranceEnglish() - Method in interface nxopen.annotations.DimensionStyleBuilder
-
Returns the upper english tolerance
License requirements: None.
- upperToleranceEnglish - Variable in class nxopen.uf.UFDrf.DimensionPreferences
-
- upperToleranceEnglish - Variable in class nxopen.uf.UFDrf.DimensionPreferences1
-
- upperToleranceMetric() - Method in interface nxopen.annotations.DimensionStyleBuilder
-
Returns the upper metric tolerance
License requirements: None.
- upperToleranceMetric - Variable in class nxopen.uf.UFDrf.DimensionPreferences
-
- upperToleranceMetric - Variable in class nxopen.uf.UFDrf.DimensionPreferences1
-
- upperToleranceType() - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder
-
Returns the upper tolerance enum
License requirements: None.
- upperToleranceType() - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder
-
Returns the upper tolerance enum
License requirements: None.
- upperToleranceValue() - Method in interface nxopen.annotations.Dimension
-
Returns a setting to control the upper tolerance value of a dimension.
- upperToleranceValue() - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder
-
Returns the upper tolerance value
License requirements: None.
- upperToleranceValue() - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder
-
Returns the upper tolerance value
License requirements: None.
- UPSTREAM - Static variable in class nxopen.cae.Post.StreamlineDirection
-
- UPSTREAM - Static variable in class nxopen.cae.Post.StreamlineSynchronization
-
- upToDate - Variable in class nxopen.Body.FacetedBodyData
-
- upToleranceForLength() - Method in interface nxopen.tooling.DieDesPierceInsertBuilder
-
Returns the up tolerance value for length.
- upToleranceForWidth() - Method in interface nxopen.tooling.DieDesPierceInsertBuilder
-
Returns the up tolerance value for width.
- upVector() - Method in interface nxopen.display.DecalBuilder
-
Returns the decal up vector
License requirements: None.
- upVector - Variable in class nxopen.uf.UFDisp.TextureSpaceInfo
-
- upVectorValue() - Method in interface nxopen.display.DecalBuilder
-
Returns the decal up vector value
License requirements: None.
- UPWARD - Static variable in class nxopen.cae.xyplot.TextOrientation
-
Upward text orientation
- UPWARD_OFFSET - Static variable in class nxopen.features.vehicledesign.CloseRangeVisibilityBuilder.EyePointOffsetTypes
-
Upward offset
- upwardFace() - Method in interface nxopen.features.sheetmetal.FlatPatternBuilder
-
Returns the upward face selection
License requirements: None.
- URL - Static variable in class nxopen.annotations.PmiFilterByType.Type
-
Indicates a PMI URL type
- url() - Method in interface nxopen.annotations.TableCellStyleBuilder
-
Returns the url
License requirements: None.
- url() - Method in interface nxopen.annotations.UrlBusinessModifierBuilder
-
Returns the url
License requirements: None.
- URL - Static variable in class nxopen.issue.IssueProperty.Type
-
URL type
- url - Variable in class nxopen.uf.UFTabnot.CellPrefs
-
- URL_VALUE - Static variable in class nxopen.uf.UFPd.AttributeValueType
-
- UrlBusinessModifier - Interface in nxopen.annotations
-
Represents business modifier that applies an URL to a PMI.
- UrlBusinessModifierBuilder - Interface in nxopen.annotations
-
- urlValue() - Method in interface nxopen.annotations.PmiAttributeValueUrlBuilder
-
Returns the url_value
License requirements: None.
- urlValue() - Method in interface nxopen.annotations.PmiUrlNoteBuilder
-
Returns the url value
License requirements: None.
- US - Static variable in class nxopen.features.vehicledesign.PendulumPlacementBuilder.PendulumProfileType
-
- USA_CANADA_FMVSS111CMVSSS111 - Static variable in class nxopen.features.vehicledesign.MirrorCertificationBuilder.DriverSideStandardsType
-
Represents USA - Canada : FMVSS111 - CMVSSS111 standard
- USA_CANADA_FMVSS111CMVSSS111 - Static variable in class nxopen.features.vehicledesign.MirrorCertificationBuilder.InsideStandardsType
-
Represents USA - Canada : FMVSS111 - CMVSSS111 standard
- USA_CANADA_FMVSS111CMVSSS111 - Static variable in class nxopen.features.vehicledesign.MirrorCertificationBuilder.PassengerSideStandardsType
-
Represents USA - Canada : FMVSS111 - CMVSSS111 standard
- usageInfoList() - Method in interface nxopen.geometricutilities.ReplAsstBuilder
-
Returns the list of all Entity Usage Info objects
License requirements: None.
- usageStatus() - Method in interface nxopen.geometricutilities.EntityUsageInfo
-
Returns the usage status of the corresponding entity
License requirements: None.
- use - Variable in class nxopen.uf.UFCgm.CustomWidths
-
- use() - Method in interface nxopen.WidthDefinition
-
Returns the 'use' member.
- USE_ACTIVE_MINUS - Static variable in class nxopen.uf.UFDisp.ViewType
-
- USE_ACTIVE_PLUS - Static variable in class nxopen.uf.UFDisp.ViewType
-
- USE_ASSEMBLY_POSITIONING - Static variable in class nxopen.cam.NcmctPartMountingBuilder.PositioningTypes
-
Use Assembly Positioning
- USE_BLADE_STOCK - Static variable in class nxopen.cam.CutParametersAdjacentBladesTypes
-
Use Blade Stock
- USE_CAMERA_DIRECTION_PLANE_TEXTURE_SPACE - Static variable in class nxopen.uf.UFDisp.TextureSpaceType
-
- USE_CHECK_STOCK - Static variable in class nxopen.cam.CutParametersAdjacentBladesTypes
-
Use Check Stock
- USE_COMMON - Static variable in class nxopen.cam.NcmClearanceBuilder.ClearanceTypes
-
inherited from common or parent
- USE_CURRENT - Static variable in class nxopen.annotations.BaseCustomSymbolBuilder.AnnotationPreferences
-
Current preferences
- USE_CURRENT - Static variable in class nxopen.annotations.BaseCustomSymbolBuilder.GeometryPreferences
-
Current preferences
- USE_CURRENT - Static variable in class nxopen.annotations.TextWithSymbolsBuilder.SymbolPreferencesType
-
Use Current
- USE_CURSOR - Static variable in class nxopen.uf.UFDisp.ViewType
-
- USE_CURVE_PARAMETERS - Static variable in class nxopen.SketchAlongPathBuilder.SketchOrientationType
-
Based on curve parameter
- USE_CUSTOMIZED_INTERFACE - Static variable in class nxopen.uf.UFCamPref.CamPref
-
- USE_CUT_DEPTH - Static variable in class nxopen.cam.StepoverBuilder.StepoverTypes
-
Use Depth Of Cut
- USE_DECAL_MATERIAL - Static variable in class nxopen.display.DecalBuilder.DecalIllumination
-
set decal's reflectivity
- USE_DEFAULT - Static variable in class nxopen.Selection.SelectionScope
-
Use the default selection scope
- USE_DEFINITION - Static variable in class nxopen.annotations.BaseCustomSymbolBuilder.AnnotationPreferences
-
Defined preferences
- USE_DEFINITION - Static variable in class nxopen.annotations.BaseCustomSymbolBuilder.GeometryPreferences
-
Defined preferences
- USE_DEFINITION - Static variable in class nxopen.annotations.TextWithSymbolsBuilder.SymbolPreferencesType
-
Use Definition
- USE_ENGRET - Static variable in class nxopen.cam.NcmPlanarBuilder.TransferWithinLevelsWiths
-
Use engage and retract defs
- USE_EXISTING - Static variable in class nxopen.cae.SolverAppendOption.MergeOption
-
- USE_EXISTING - Static variable in class nxopen.cam.FeatureProcessBuilder.FeatureGroupingType
-
Try to use existing feature groups
- USE_EXISTING - Static variable in class nxopen.cam.InspectionMoveBuilder.SensorStrategyTypes
-
Use existing only
- USE_EXISTING - Static variable in class nxopen.uf.UFClone.Action
-
- USE_EXISTING_LEVEL - Static variable in class nxopen.uf.UFAssem.LevelOption
-
- USE_EXISTING_NORMALS - Static variable in class nxopen.features.OffsetSurfaceBuilder.OrientationMethodType
-
- USE_FAST_TICKER - Static variable in class nxopen.sim.SimDebugBuilder.UiType
-
Use Fast Ticker
- USE_FORMING_OPERATIONS - Static variable in class nxopen.uf.UFSmd.FormingMethodE
-
- USE_HELP_PARAM - Static variable in class nxopen.uf.UFSket.HelpType
-
- USE_HELP_PT - Static variable in class nxopen.uf.UFSket.HelpType
-
- USE_HYBRID_GOUGE_CHECKER - Static variable in class nxopen.sim.SimDebugBuilder.UiType
-
Use Hybrid Gouge Checker
- USE_INHERITED - Static variable in class nxopen.cam.LowerLimit.ModeTypes
-
use inherited
- USE_LOG_FILE - Static variable in class nxopen.tooling.ToolingClonemethod
-
Use clone log file method
- USE_MAIN_MCS - Static variable in class nxopen.cam.OrientGeomBuilder.SpecialOutputModes
-
Special output mode: Use main MCS
- USE_MTB_OLD_DIALOGS - Static variable in class nxopen.sim.SimDebugBuilder.UiType
-
Use MTB Old Dialogs
- USE_OLD_MACHINE_TRANSFORMATION - Static variable in class nxopen.cam.NcmctPartMountingBuilder.PositioningTypes
-
Use Old Machine Transformation
- USE_OPERATION - Static variable in class nxopen.cam.ToolPathEditorBuilder.ClearanceMethodType
-
- USE_OTHER - Static variable in class nxopen.cam.NcmAvoidancePointBuilder.PointStates
-
use from point (only for GoHome point)
- USE_PARENT_ORIENATION - Static variable in class nxopen.drawings.ViewOrientationBuilder.Orientation
-
DO NOT USE Deprecated as of NX75
- USE_PARENT_ORIENTATION - Static variable in class nxopen.drawings.ViewOrientationBuilder.Orientation
-
Use Parent View Orientation
- USE_PART_MOUNT_JUNCTION - Static variable in class nxopen.cam.NcmctPartMountingBuilder.PositioningTypes
-
Use Part Mount Junction
- USE_POINT - Static variable in class nxopen.cam.NcmAvoidancePointBuilder.PointStates
-
use specified point
- USE_REFERENCE_TOOL - Static variable in class nxopen.cam.CutParametersIpwTypes
-
Use reference tool
- USE_RESPONSES - Static variable in class nxopen.BasePart.CloseModified
-
Use the responses in
PartCloseResponses
to determine whether to close a
modified part or not
- USE_REV_RULE - Static variable in class nxopen.assemblies.AssembliesChildRevisionOptions
-
show revision of the child parts based on the revision rule
- USE_SAME_AS_ACADWIDTH_FACTOR - Static variable in class nxopen.DxfdwgImporter.AspectRatioOptions
-
- USE_SAME_AS_NXASPECTRATIO - Static variable in class nxopen.DxfdwgCreator.WidthfactorMethodOptions
-
- USE_SECTION_PLANE - Static variable in class nxopen.weld.DatumCommonBuilder.ControlMethodTypes
-
Not a principal axis, use Section Plane
- USE_SELF_FORMING_FEATURES - Static variable in class nxopen.uf.UFSmd.FormingMethodE
-
- USE_STORED_METHOD - Static variable in class nxopen.assemblies.ClearanceSet.ReanalyzePairCalculationMethod
-
Use the clearance set's defined analysis method.
- USE_STRICT_LEVEL - Static variable in class nxopen.uf.UFAssem.LevelOption
-
- USE_TRANSFER_METHOD - Static variable in class nxopen.cam.LevelToLevel.Types
-
Use transfer method
- USE_UNDERLYING_MATERIAL - Static variable in class nxopen.display.DecalBuilder.DecalIllumination
-
base decal reflectivity on underlying material
- USE_VALUE_SPECIFIED_IN_MAPPING_FILE - Static variable in class nxopen.DxfdwgCreator.WidthfactorMethodOptions
-
- USE_VALUE_SPECIFIED_IN_MAPPING_FILE - Static variable in class nxopen.DxfdwgImporter.AspectRatioOptions
-
- USE_VIEW_TAG - Static variable in class nxopen.uf.UFDisp.ViewType
-
- USE_WORK_VIEW - Static variable in class nxopen.uf.UFDisp.ViewType
-
- useAcceleration() - Method in interface nxopen.mechatronics.PositionControlBuilder
-
Returns the use acceleration flag, which is used to control if the position control includes acceleration data.
- useAcceleration() - Method in interface nxopen.mechatronics.SpeedControlBuilder
-
Returns the use acceleration flag, which is used to control if the speed control includes acceleration data.
- useAdditionalParameters() - Method in interface nxopen.cae.optimization.TBSSmoothBuilder
-
Returns the option to use additional parameter.
- useAdjacentBendFace - Variable in class nxopen.uf.UFModl.BendOperationData
-
- useAlternate(Tag, String, String, String) - Method in interface nxopen.uf.UFAssem
-
- useAlternateSolution() - Method in interface nxopen.SketchDimensionalConstraint
-
Switches the constraint to an alternate solution
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- useAlternateSolution() - Method in interface nxopen.SketchTangentConstraint
-
Switches the constraint to an alternate solution
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.
- useAngle() - Method in interface nxopen.die.FlangeSteelRibChildBuilder
-
Returns the use angle toggle of the Flange Steel Ribs
License requirements: ug_die_design ("Die Design")
.
- useAngle() - Method in interface nxopen.die.FlangeSteelRibParentBuilder
-
Returns the use angle toggle of the Flange Steel Ribs
License requirements: ug_die_design ("Die Design")
.
- useApproxSheetBody() - Method in interface nxopen.tooling.DieDesignTrimPostBuilder
-
Returns the option to use the original sheet body or the rough offset sheet instead.
- useArrangement() - Method in interface nxopen.tooling.ChangeoverManagementBuilder
-
Set the selected changeover as current used one.
- useAutomatic() - Method in interface nxopen.cae.xyplot.CustomTextStyleSetting
-
Returns a value indicating whether to define text content automatically .
- useBaf - Variable in class nxopen.uf.UFSmd.FpPrefs
-
- useBaseline() - Method in interface nxopen.annotations.BaseLinearDimensionBuilder
-
Returns a treat first associativity as a baseline
License requirements: None.
- useBat - Variable in class nxopen.uf.UFSmd.GenPrefs
-
- useBendRatio() - Method in interface nxopen.routing.BendCorner
-
- useBendRatio() - Method in interface nxopen.routing.OffsetPath
-
Returns the use bend ratio flag for an offset object.
- useBendRatio - Variable in class nxopen.routing.SBendCorner.SBendData
-
TRUE: if bend ratio is used;
FALSE: otherwise.
- useBlankTemplate() - Method in interface nxopen.FileNew
-
Returns the property that controls if the new file should be created using a blank template.
- useBodiesOption - Variable in class nxopen.cae.FemPart.GeometryData
-
Flag if all were selected
- useBottomPlateClearance() - Method in interface nxopen.tooling.BendInsertDesignBuilder
-
Returns the option to use bottom backing plate clearance.
- useBottomPlateClearance() - Method in interface nxopen.tooling.FormingInsertBuilder
-
Returns the option to use bottom backing plate clearance.
- useBottomPlateClearance() - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
Returns the option to use bottoming plate clearance.
- useCache - Variable in class nxopen.uf.UFStd.VrmlParams
-
- useCallbackValues() - Method in interface nxopen.weld.JointItemBuilder
-
Returns the indication to use the values of the callback to define the joint
License requirements: None.
- useCamera() - Method in interface nxopen.features.vehicledesign.CloseRangeCameraListItemBuilder
-
Returns the indication if the defined camera will be used for visibility compute.
- useCameraDirectionPlaneOption() - Method in interface nxopen.display.CgfxMattexBuilder
-
- useCenterPoint() - Method in interface nxopen.features.BlendCornerBuilder
-
Returns the use center point flag.
- useClearance() - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
Returns the option to use clearance.
- useColHdrGridLines - Variable in class nxopen.uf.UFDraw.TabnotParams
-
- useConstraintsAll() - Method in interface nxopen.features.RefitFaceBuilder
-
Returns the refit face constraints use flag
License requirements: None.
- useCurveFinder() - Method in interface nxopen.features.CurveFinderBuilder
-
Returns a value that indicates whether relation recognition is enabled
License requirements: None.
- useCustomerDefaultsDisplaySettings() - Method in interface nxopen.cae.MeshCollectorDisplayDefaults
-
Use display settings from the Customer Defaults.
- useCustomerDefaultsDisplaySettings() - Method in interface nxopen.cae.MeshDisplaySettings
-
Use display settings from the Customer Defaults.
- useCustomizedInterface - Variable in class nxopen.uf.UFCam.Preferences
-
- useCustomShapeSize() - Method in interface nxopen.shapesearch.ShapeSearchBuilder
-
Returns the use custom shape size to control use shape size option or custom shape size
License requirements: shape_search ("Shape Search")
.
- useCutColor() - Method in interface nxopen.features.MasterCutBuilder
-
Returns the flag whether or not to use the specified color for the cut faces
License requirements: solid_modeling ("SOLIDS MODELING")
.
- useCutHatch() - Method in interface nxopen.features.MasterCutBuilder
-
Returns the flag whether or not the cut faces are crosshatched in wireframe mode
License requirements: solid_modeling ("SOLIDS MODELING")
.
- useCylindricalCsys() - Method in interface nxopen.cae.optimization.TBSShapeLinkCondition
-
Returns the option whether to use cylindrical coordinate system, which is avaliable whenCAE.Optimization.TBSShapeLinkCondition#manufacturingType
and CAE.Optimization.TBSShapeLinkCondition#setManufacturingType
is set to
CAE.Optimization.TBSShapeLinkCondition.ManufacturingOption#SURFACE_STAMP
License requirements: None.
- usedArrangement() - Method in interface nxopen.assemblies.Component
-
Returns
the Arrangement used for this component.
- usedCriteriaList - Variable in class nxopen.uf.UFFbmGeom.AskUsedCriteriaData
-
- useDefault() - Method in interface nxopen.cam.InspectionAnalyzeBuilder
-
Reset to use Tolerance
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- useDefaultKeepSide() - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder
-
Returns the option to use the default keep side for trimming bounded plane or enlarged surface
License requirements: None.
- useDefaultLights() - Method in interface nxopen.ModelingView
-
Changes the set of lights used in the given view to the
"Default" set, which for now is the Scene Ambient,
Scene Left Top and Scene Right Top lights.
- useDefiningPoints() - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder
-
Returns a value indicating whether to use defining points.
- useDeformedConfiguration - Variable in class nxopen.cae.Post.GraphParameters
-
Not yet supported
- useDegMin() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
Returns the deg/min flag for angle between
License requirements: None.
- useDiePlateClearance() - Method in interface nxopen.tooling.BendInsertDesignBuilder
-
Returns the option to use die plate clearance.
- useDiePlateClearance() - Method in interface nxopen.tooling.FormingInsertBuilder
-
Returns the option to use die plate clearance.
- usedobjects - Variable in class nxopen.Measurement.RoutingPathLengthData
-
The routing objects used in the path length computation
- useDoubleWidthBorder - Variable in class nxopen.uf.UFTabnot.SectionPrefs
-
- useDrawingSheetColors() - Method in interface nxopen.PlotColorsWidthsBuilder
-
Returns the use drawing sheet colors.
- useDrawingSheetColors - Variable in class nxopen.uf.UFPlot.JobOptions
-
- useDrawingSheetWidths() - Method in interface nxopen.PlotColorsWidthsBuilder
-
Returns the use drawing sheet widths.
- useDrawingSheetWidths - Variable in class nxopen.uf.UFPlot.JobOptions
-
- useEffectDist() - Method in interface nxopen.cam.NcmPlanarEngRetBuilder
-
Returns the engage/retract use effective distance
License requirements: None.
- useEffectDist() - Method in interface nxopen.cam.NcmScEngRetBuilder
-
Returns the engage/retract use effective distance
License requirements: None.
- useEffectiveBiaxialityRatio() - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder
-
Returns the effective biaxiality ratio.
- useElements() - Method in interface nxopen.cae.DurabilityEventOverridesBuilder
-
Returns the use selected elements.
- useElementSpecificValue() - Method in interface nxopen.cae.modelcheck.ElementQualitySetting
-
Returns an option indicating whether to use element specific quality value for testing
License requirements: None.
- useEndLimit - Variable in class nxopen.uf.UFModl.BlendFacesLimitData
-
- useEnhancedMachCorner - Variable in class nxopen.uf.UFModl.SmcornerData
-
- useEntryAvoidance() - Method in interface nxopen.cam.InspectionPathBuilder
-
Returns a flag to indicate if collision avoidance is required at entry
License requirements: None.
- useExactPositioning() - Method in interface nxopen.cam.VolumeBased25DMillingOperationBuilder
-
Returns the exact positioning flag
License requirements: None.
- useExistingCuttingSideFace() - Method in interface nxopen.features.shipdesign.MarkingLineDesignBuilder
-
Returns the option to decide if the current cutting side faces are used(true)
or if the cutting side faces should be recalculated(false).
- USEEXISTINGONLY - Static variable in class nxopen.cam.InspectionSensorMassEditBuilder.SensorStrategyType
-
Use existing only
- useExitAvoidance() - Method in interface nxopen.cam.InspectionPathBuilder
-
Returns a flag to indicate if collision avoidance is required at exit
License requirements: None.
- useExportSessionWidths() - Method in interface nxopen.CGMImporter
-
Returns
License requirements: None.
- useEyeFrom() - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder
-
Returns the part that the eye is from.
- useFaceBrowse() - Method in interface nxopen.features.FaceRecognitionBuilder
-
Returns a value that indicates whether relations are found when faces are added to the face collector
License requirements: None.
- useFaceCapBlend() - Method in interface nxopen.geometricutilities.FacePlaneSelectionBuilder
-
Returns the use face cap blend flag
License requirements: None.
- useFaceEdgesColor - Variable in class nxopen.uf.UFDisp.SystemParams
-
- useFeatStds - Variable in class nxopen.uf.UFSmd.GenPrefs
-
- useFeatureCollisionAvoidance() - Method in interface nxopen.cam.InspectionUVGridBuilder
-
Returns the flag to use feature collision avoidance
License requirements: None.
- useFeatureNameAsType() - Method in interface nxopen.cam.FeatureRecognitionBuilder
-
Returns the flag indicating whether the feature name will be used as feature type
License requirements: None.
- useFeetInchesAndFraction() - Method in interface nxopen.drafting.AutomationRuleBuilder
-
Returns the use feet inches and fraction determine wheather or not to display dimension value
in feet, inches and fractions if it is greater than the specified value
License requirements: None.
- useFillin() - Method in interface nxopen.weld.WeldGrooveBuilder
-
Returns a value indicating whether to use fillin
License requirements: ugweld ("UG WELD")
.
- useFrontHeadRests() - Method in interface nxopen.features.vehicledesign.AllAroundVisionBuilder
-
Returns the indication if the front head rests geometry should be used.
- useGeneralSurface() - Method in interface nxopen.features.vehicledesign.GroundClearanceBuilder
-
Returns the indication if the general surface will be created.
- useGlobal() - Method in interface nxopen.features.sheetmetal.CleanUpUtilityBuilder
-
Returns the use global, if it equals to true - use global thickness value
License requirements: None.
- useGlobal() - Method in interface nxopen.features.sheetmetal.CornerTreatmentBuilder
-
Returns the use global toggle value
License requirements: None.
- useGlobal() - Method in interface nxopen.features.sheetmetal.ResizeNeutralFactorBuilder
-
Returns the Use Global Neutral Factor toggle.
- useGlobalAngle - Variable in class nxopen.uf.UFSmd.GenPrefs
-
- useGlobalBaf - Variable in class nxopen.uf.UFModl.BendOperationData
-
- useGlobalBaf - Variable in class nxopen.uf.UFSmd.GenPrefs
-
- useGlobalBendRadius() - Method in interface nxopen.features.sheetmetal.BendOptions
-
Returns the Use Global Bend Radius toggle.
- useGlobalBrLengthValue - Variable in class nxopen.uf.UFNxsm.FlangeData
-
- useGlobalBrWidthValue - Variable in class nxopen.uf.UFNxsm.FlangeData
-
- useGlobalFontSetting() - Method in interface nxopen.cae.xyplot.TextStyleSetting
-
Returns a value indicating whether to use the global setting of text font, font style and font size.
- useGlobalNeutralFactor() - Method in interface nxopen.features.sheetmetal.BendOptions
-
Returns the Use Global Neutral Factor toggle.
- useGlobalNfactorValue - Variable in class nxopen.uf.UFNxsm.FlangeData
-
- useGlobalRadius - Variable in class nxopen.uf.UFSmd.GenPrefs
-
- useGlobalRadiusValue - Variable in class nxopen.uf.UFNxsm.FlangeData
-
- useGlobalReliefDepth() - Method in interface nxopen.features.sheetmetal.BendOptions
-
Returns the Use Global Relief Depth toggle.
- useGlobalReliefWidth() - Method in interface nxopen.features.sheetmetal.BendOptions
-
Returns the Use Global Relief Width toggle.
- useGlobalThickness() - Method in interface nxopen.features.sheetmetal.SheetMetalFromSolidBuilder
-
Returns the use global thickness
License requirements: None.
- useGlobalThickness - Variable in class nxopen.uf.UFSmd.GenPrefs
-
- useGridLines - Variable in class nxopen.uf.UFDraw.TabnotParams
-
- useHelp - Variable in class nxopen.uf.UFSket.ConGeom
-
- useHelpPoint - Variable in class nxopen.uf.UFModl.BlendFacesLimitData
-
- useHighestQuality() - Method in interface nxopen.cae.optimization.TBSMeshSmooth
-
Returns a value indicating whether to use highest mesh quality
License requirements: None.
- useHoleDiameter() - Method in interface nxopen.features.DeleteFaceBuilder
-
Returns the flag of using hole diameter to filter hole or not, only for delete hole type and the max hole diameter should be
set if it is true, don't use it until nx502
License requirements: None.
- useHorizGridLines - Variable in class nxopen.uf.UFDraw.TabnotParams
-
- useIbl() - Method in interface nxopen.ModelingViewHighQualityImage
-
Returns the setting for whether the High Quality Image is to use IBL
License requirements: None.
- useImageBasedLighting() - Method in interface nxopen.display.ImageBasedLighting
-
Returns whether image-based lighting (IBL) is enabled
License requirements: None.
- useInferredReferencePoint() - Method in interface nxopen.features.MirrorBuilder
-
- useInstance() - Method in interface nxopen.tooling.EWDraftingBuilder
-
Returns the option used to display and use instance of electrode to create drawing.
- useLightsForShadowCatcherInHqi() - Method in interface nxopen.display.ImageBasedLighting
-
Returns whether high quality image generation (HQI) uses individual light sources or image-based lighting for shadow catcher
License requirements: None.
- useLightsForShadowCatcherInLwrt() - Method in interface nxopen.display.ImageBasedLighting
-
Returns whether Advanced Studio display (lwrt) uses individual light sources or image-based lighting for shadow catcher
License requirements: None.
- useLightweightRepresentations() - Method in interface nxopen.LoadOptions
-
Returns the option that controls if components are displayed with a lightweight
or exact representation.
- useLightweightRepresentations - Variable in class nxopen.uf.UFAssem.Options
-
- useLimits() - Method in interface nxopen.features.shipdesign.PlateChamferBuilder
-
Returns the use limits
License requirements: None.
- useLimitsListFlag() - Method in interface nxopen.features.FaceBlendBuilder
-
Returns the trimming option that if it is using limits list to do trim or not
License requirements: None.
- useLineAntialiasing() - Method in interface nxopen.drawings.ViewWorkflowBuilder
-
Returns the use line antialiasing
License requirements: None.
- useLineLength() - Method in interface nxopen.drawings.ViewSectionLineBuilder
-
Returns the use line length in case of ESKD section line
License requirements: None.
- useLoadingSpecifiedByStandard() - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder
-
Returns the flag to indicate if the loading specified by the standard will be used.
- useLwrtImageBasedLighting() - Method in interface nxopen.display.ImageBasedLighting
-
Returns whether image-based lighting is enabled in Advanced Studio (lwrt) display
License requirements: None.
- useMachineCycle() - Method in interface nxopen.cam.TurningOperationBuilder
-
Returns the Use Machine Cycle toggle
License requirements: None.
- useMarginal() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the setting to indicate if the marginal values should be used when creating the impact zone,
true they will be used, false they will not be used.
- useMassProperties - Variable in class nxopen.uf.UFMotion.SolverParameters
-
- useMaxLength() - Method in interface nxopen.geometricanalysis.CurveAnalysisRecord
-
- useMaxLength - Variable in class nxopen.uf.UFCurve.AnalysisDisplay
-
- useMaxWidth() - Method in interface nxopen.cam.NcmPlanarEngRetBuilder
-
Returns the engage/retract use max width
License requirements: None.
- useMeshCollectorDisplaySettings() - Method in interface nxopen.cae.MeshDisplaySettings
-
Use display settings from the Mesh Collector.
- useMidpointSampling - Variable in class nxopen.uf.UFDisp.ShadeOptions
-
- useMinimumCheckingValue() - Method in interface nxopen.routing.SplinePathBuilder
-
Returns whether the spline minimum radius value should be checked or not on this spline.
- useMirror() - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder
-
Returns the indication if the mirror will be used.
- useMiter() - Method in interface nxopen.features.sheetmetal.HemFlangeBuilder
-
Returns the use miter hem
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- useModelDepth() - Method in interface nxopen.cam.HoleDrilling
-
Returns the use model depth flag
License requirements: None.
- useNearestPointOnSection() - Method in interface nxopen.features.BridgeCurveBuilderEx
-
Returns the flag indicating if the nearest cursor position on the section is to be used to locate start or end of the curve
License requirements: features_modeling ("FEATURES MODELING")
.
- useNonLinear() - Method in interface nxopen.cae.DurabilityEventOverridesBuilder
-
Returns the override material.
- useNormalCutoutMethod() - Method in interface nxopen.features.sheetmetal.MiterOptions
-
Returns the cut type of the sheet.
- useNotchFactor() - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder
-
Returns the use notch factor.
- useOffset() - Method in interface nxopen.drawings.SectionLineStyleBuilder
-
- useOffset() - Method in interface nxopen.drawings.ViewSectionLineBuilder
-
Returns the use offset
License requirements: None.
- useOnePickPositionMethod() - Method in interface nxopen.tooling.ReusableObjectPasteBuilder
-
Returns the option specifying whether to use one-pick position method for drag/drop
License requirements: None.
- usePart() - Method in interface nxopen.cam.DmBndBuilder
-
Returns the Use Part
License requirements: None.
- usePartCollisionAvoidance() - Method in interface nxopen.cam.InspectionUVGridBuilder
-
Returns the flag to use part collision avoidance
License requirements: None.
- usePartialLoading() - Method in interface nxopen.LoadOptions
-
Returns the option that controls the partial loading of components.
- usePercent() - Method in interface nxopen.die.HeelpostBuilder
-
Returns the value (true or false) to decide how to determine the wall thickness.
- usePitchOption() - Method in interface nxopen.geometricutilities.AngularPatternSpacing
-
Returns the switch to use Pitch Distance or Pitch Angle.
- usePlaneCapBlend() - Method in interface nxopen.geometricutilities.FacePlaneSelectionBuilder
-
Returns the use plane cap blend
License requirements: None.
- usePlateClearanceEighth() - Method in interface nxopen.tooling.ClearanceManagementBuilder
-
Returns the option whether use plate clearance eighth.
- usePlateClearanceFifth() - Method in interface nxopen.tooling.ClearanceManagementBuilder
-
Returns the option whether use plate clearance fifth.
- usePlateClearanceFirst() - Method in interface nxopen.tooling.BurringInsertBuilder
-
Returns the option to use plate clearance first.
- usePlateClearanceFirst() - Method in interface nxopen.tooling.ClearanceManagementBuilder
-
Returns the option whether use plate clearance first.
- usePlateClearanceFourth() - Method in interface nxopen.tooling.ClearanceManagementBuilder
-
Returns the option whether use plate clearance fourth.
- usePlateClearanceNinth() - Method in interface nxopen.tooling.ClearanceManagementBuilder
-
Returns the option whether use plate clearance ninth.
- usePlateClearanceSecond() - Method in interface nxopen.tooling.BurringInsertBuilder
-
Returns the option to use plate clearance second.
- usePlateClearanceSecond() - Method in interface nxopen.tooling.ClearanceManagementBuilder
-
Returns the option whether use plate clearance second.
- usePlateClearanceSeventh() - Method in interface nxopen.tooling.ClearanceManagementBuilder
-
Returns the option whether use plate clearance seventh.
- usePlateClearanceSixth() - Method in interface nxopen.tooling.ClearanceManagementBuilder
-
Returns the option whether use plate clearance sixth.
- usePlateClearanceTenth() - Method in interface nxopen.tooling.ClearanceManagementBuilder
-
Returns the option whether use plate clearance tenth.
- usePlateClearanceThird() - Method in interface nxopen.tooling.BurringInsertBuilder
-
Returns the option to use plate clearance third.
- usePlateClearanceThird() - Method in interface nxopen.tooling.ClearanceManagementBuilder
-
Returns the option whether use plate clearance third.
- usePlateThicknessCorrection() - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder
-
Returns the plate thickness correction usage.
- usePortRotateFlag() - Method in interface nxopen.positioning.ConstraintReference
-
Returns
the flag forcing the use of the rotation vector of the
referenced nxopen.routing.Port
object instead of the alignment vector
when solving the constraint system.
- usePreferredPortFlag() - Method in interface nxopen.preferences.RoutingPart
-
Returns whether or not to use the preffered placement port during
calcluation of placement solutions during place part.
- usePrevious2dIpw() - Method in interface nxopen.cam.MillCutParameters
-
Returns the use previous IPW toggle
License requirements: None.
- useProjectedCurve() - Method in interface nxopen.geometricanalysis.sectionanalysis.CurveAlignedBuilder
-
Returns a value indicating whether to project the curve to a plane
License requirements: None.
- usePunchPlateClearance() - Method in interface nxopen.tooling.BendInsertDesignBuilder
-
Returns the option to use punch plate clearance.
- usePunchPlateClearance() - Method in interface nxopen.tooling.FormingInsertBuilder
-
Returns the option to use punch plate clearance.
- usePunchPlateClearance() - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
Returns the option to use punch plate clearance.
- useQuery() - Method in interface nxopen.cam.HoleMakingBuilder
-
Returns the use query flag
License requirements: None.
- user - Variable in class nxopen.BasePart.HistoryEventInformation
-
user id
- USER - Static variable in class nxopen.cae.DurabilityStrainGageAnalyzerBuilder.GageConstructionEnum
-
User
- USER - Static variable in class nxopen.cam.GrooveToolBuilder.InsertShapes
-
user defined groove tool
- USER - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.ToleranceSource
-
User
- USER - Static variable in class nxopen.cam.LaserControlPoint.ControlPointTypes
-
user
- USER - Static variable in class nxopen.cam.TurnToolBuilder.InsertShapes
-
Insert shape: User defined
- user - Variable in class nxopen.issue.IssueContent.IsCheckedOutData
-
- USER - Static variable in class nxopen.issue.IssueProperty.Type
-
User type
- USER - Static variable in class nxopen.options.LevelType
-
User level
- USER - Static variable in class nxopen.preferences.LoadDraftingStandardBuilder.LoadLevel
-
the user level
- USER - Static variable in class nxopen.routing.ControlPoint.DefinedStatus
-
Created by the user.
- user() - Method in interface nxopen.routing.DesignRuleOverride
-
Returns the user of the design rule override is returned
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- USER - Static variable in class nxopen.RuleManager.Filter
-
User classes only
- USER - Static variable in class nxopen.uf.UFKf.Type
-
- user - Variable in class nxopen.uf.UFPart.AskNthHistoryData
-
- USER_ABORT - Static variable in class nxopen.uf.UFConstants
-
- USER_DEF - Static variable in class nxopen.cae.LaminateRandomEventBuilder.ConfidenceLevelOptionEnum
-
- USER_DEFINED - Static variable in class nxopen.annotations.CuttingPlaneSymbolBuilder.ViewNameFormatOption
-
User Defined View Name
- USER_DEFINED - Static variable in class nxopen.annotations.DiameterSymbol
-
Specifies user defined symbol
- USER_DEFINED - Static variable in class nxopen.annotations.PlaneBuilder.PlaneMethodType
-
User define plane
- USER_DEFINED - Static variable in class nxopen.annotations.PmiFilterByType.Type
-
Indicates a PMI user defined type
- USER_DEFINED - Static variable in class nxopen.annotations.RadiusSymbol
-
Specfies user defined symbol
- USER_DEFINED - Static variable in class nxopen.annotations.SearchCriteriaDimensionBuilder.DiameterSymbolOptions
-
UserDefined
- USER_DEFINED - Static variable in class nxopen.annotations.SearchCriteriaDimensionBuilder.RadialSymbolOptions
-
UserDefined
- USER_DEFINED - Static variable in class nxopen.assemblies.ClearanceAnalysisBuilder.PairExcludedReason
-
user has explicitly included or excluded this pair
- USER_DEFINED - Static variable in class nxopen.cae.LaminatePly.InterLaminarFailureTheoryType
-
User defined interlaminar failure theory (thru a user dll)
- USER_DEFINED - Static variable in class nxopen.cae.LaminatePly.PlyFailureTheoryType
-
User defined ply failure theory (thru a user dll)
- USER_DEFINED - Static variable in class nxopen.cae.responsesimulation.Excitation.Component
-
- USER_DEFINED - Static variable in class nxopen.cae.responsesimulation.InitialConditions.Type
-
- USER_DEFINED - Static variable in class nxopen.cae.responsesimulation.RSEvent.DdamFormulationType
-
- USER_DEFINED - Static variable in class nxopen.cae.responsesimulation.RSEvent.DurationOption
-
- USER_DEFINED - Static variable in class nxopen.cae.ResultsManipulationBuilder.UnitsSystem
-
- USER_DEFINED - Static variable in class nxopen.cam.BoundarySet.PlaneTypes
-
user defined plane
- USER_DEFINED - Static variable in class nxopen.cam.CutLevel.RangeTypes
-
User Defined
- USER_DEFINED - Static variable in class nxopen.cam.CutLevelPlanar.Types
-
User Defined
- USER_DEFINED - Static variable in class nxopen.cam.DrillThreadMillToolBuilder.ToolFormTypeTypes
-
User Defined
- USER_DEFINED - Static variable in class nxopen.cam.fbm.ThreadFeatureGeometry.Form
-
Form: User defined
- USER_DEFINED - Static variable in class nxopen.cam.FlowBuilder.FlowEditTypes
-
User Defined
- USER_DEFINED - Static variable in class nxopen.cam.GrooveToolBuilder.HolderStyles
-
user defined
- USER_DEFINED - Static variable in class nxopen.cam.HoleBossGeom.FormTypes
-
Form: User-defined
- USER_DEFINED - Static variable in class nxopen.cam.InferredDouble.Lock
-
Lock: User Defined
- USER_DEFINED - Static variable in class nxopen.cam.SimulationOptionsBuilder.StockType
-
use user defined stock
- USER_DEFINED - Static variable in class nxopen.cam.StepoverBuilder.StepoverTypes
-
User Defined
- USER_DEFINED - Static variable in class nxopen.cam.SurfaceContourBuilder.DriveMethodTypes
-
User Function
- USER_DEFINED - Static variable in class nxopen.cam.TabPointDataBuilder.TabThreadMethodType
-
User Defined
- USER_DEFINED - Static variable in class nxopen.cam.ToolAxisVariable.Types
-
User Defined
- USER_DEFINED - Static variable in class nxopen.cam.ToolPathTiltTilting.ManualTiltTypes
-
- USER_DEFINED - Static variable in class nxopen.die.AddendumSectionBuilder.SectionShapeType
-
Section shape is user defined.
- USER_DEFINED - Static variable in class nxopen.die.FillAreaBuilder.Types
-
The user must defined all the constraints for the area (inputs from the target are ignored).
- USER_DEFINED - Static variable in class nxopen.display.FacetSettingsBuilder.AdvVisToleranceSetting
-
- USER_DEFINED - Static variable in class nxopen.display.FacetSettingsBuilder.FacetToViewRatio
-
Deprecated.
- USER_DEFINED - Static variable in class nxopen.display.FacetSettingsBuilder.ShadedToleranceSetting
-
- USER_DEFINED - Static variable in class nxopen.display.ImageBaseBuilder.BasePointChoices
-
user defined
- USER_DEFINED - Static variable in class nxopen.display.ImageBaseBuilder.InsertionPoint
-
user defined insertion point type
- USER_DEFINED - Static variable in class nxopen.display.ImageBaseBuilder.SizeOptions
-
user defined option
- USER_DEFINED - Static variable in class nxopen.display.ImageBasedLighting.ImagesType
-
Use the image file specified.
- USER_DEFINED - Static variable in class nxopen.display.ImageBasedLighting.ImageUpVectorTypes
-
- USER_DEFINED - Static variable in class nxopen.display.LayerSettingsBuilder.LayerOptionType
-
User specified layer
- USER_DEFINED - Static variable in class nxopen.display.RayTracedStudioEditorBuilder.RayTracedStudioStaticImageResolutionType
-
user specified image output resolution in DPI (dots per inch)
- USER_DEFINED - Static variable in class nxopen.display.RayTracedStudioEditorBuilder.RayTracedStudioStaticImageSizeType
-
user specified size for static image output
- USER_DEFINED - Static variable in class nxopen.display.RayTracedStudioEditorBuilder.StaticRayTracedStudioQualityType
-
User specified ray traced display quality for static image rendering
- USER_DEFINED - Static variable in class nxopen.display.Stage.OrientationType
-
Use user defined plane for the stage floor.
- USER_DEFINED - Static variable in class nxopen.facet.FillHoleBuilder.TargetTypes
-
Fills user-defined target holes.
- USER_DEFINED - Static variable in class nxopen.features.sheetmetal.AeroLighteningCutoutBuilder.Types
-
- USER_DEFINED - Static variable in class nxopen.features.shipdesign.PenetrationRequest.CoutoutType
-
- USER_DEFINED - Static variable in class nxopen.features.shipdesign.PenetrationRequest.DirectionType
-
- USER_DEFINED - Static variable in class nxopen.features.StyledSweepBuilder.SectionOrientationOptions
-
User Defined
- USER_DEFINED - Static variable in class nxopen.features.TrimCurveBuilder.InteresectionMethods
-
User defined
- USER_DEFINED - Static variable in class nxopen.features.vehicledesign.BaseDataLoadingBuilder.LoadingType
-
User-Defined - user can add or delete it.
- USER_DEFINED - Static variable in class nxopen.features.vehicledesign.BumperPendulumBuilder.RequirementsControlType
-
- USER_DEFINED - Static variable in class nxopen.features.vehicledesign.CloseRangeVisibilityBuilder.RequirementsControlType
-
User defined type
- USER_DEFINED - Static variable in class nxopen.features.vehicledesign.CrashBarrierBuilder.RequirementsControlsControlType
-
- USER_DEFINED - Static variable in class nxopen.features.vehicledesign.DynamicCurbBuilder.RequirementsControlType
-
- USER_DEFINED - Static variable in class nxopen.features.vehicledesign.GroundClearanceBuilder.RequirementControls
-
- USER_DEFINED - Static variable in class nxopen.features.vehicledesign.HeadImpactBuilder.RequirementsControlType
-
- USER_DEFINED - Static variable in class nxopen.features.vehicledesign.InnerAngleBuilder.RequirementsControlType
-
- USER_DEFINED - Static variable in class nxopen.features.vehicledesign.ManikinBuilder.StandardType
-
User Defined Manikin Size Type
- USER_DEFINED - Static variable in class nxopen.features.vehicledesign.OilPanBuilder.RequirementsControlType
-
- USER_DEFINED - Static variable in class nxopen.features.vehicledesign.SlopeBuilder.RequirementsControlType
-
- USER_DEFINED - Static variable in class nxopen.features.vehicledesign.StaticCurbBuilder.RequirementsControlType
-
User Defined
- USER_DEFINED - Static variable in class nxopen.features.vehicledesign.VehicleCoordinateSystemBuilder.Types
-
User Defined
- USER_DEFINED - Static variable in class nxopen.features.vehicledesign.WheelCoveringBuilder.RequirementsControlType
-
Represents the option for input of user defined parameters
- USER_DEFINED - Static variable in class nxopen.features.vehicledesign.WheelFixingBuilder.RequirementsControlType
-
- USER_DEFINED - Static variable in class nxopen.geometricanalysis.DeviationGaugeBuilder.AdditionalValuesLabelType
-
User Defined
- USER_DEFINED - Static variable in class nxopen.geometricanalysis.GapFlushnessBuilder.SectionCurveOptions
-
use user defined curve
- USER_DEFINED - Static variable in class nxopen.geometricutilities.ParentEquivalencyMap.Type
-
user defined or manual
- USER_DEFINED - Static variable in class nxopen.geometricutilities.PatternClockingBuilder.ClockingType
-
- USER_DEFINED - Static variable in class nxopen.ListCreator.ResolutionType
-
UserDefined
- USER_DEFINED - Static variable in class nxopen.mechatronics.CollisionBodyBuilder.ShapePropertyTypes
-
user defined
- USER_DEFINED - Static variable in class nxopen.mechatronics.CollisionSensorBuilder.ShapePropertiesOption
-
UserDefined
- USER_DEFINED - Static variable in class nxopen.mechatronics.RigidBodyBuilder.MassPropertiesOption
-
user defined
- USER_DEFINED - Static variable in class nxopen.motion.GraphBuilder.XAxisTypeChoices
-
User defined
- USER_DEFINED - Static variable in class nxopen.motion.LinkMassProperty.MassPropertyType
-
Mass property defined by user
- USER_DEFINED - Static variable in class nxopen.motion.Marker.MarkerType
-
User created marker.
- USER_DEFINED - Static variable in class nxopen.motion.MotionSensorBuilder.Reference
-
user defined reference frame
- USER_DEFINED - Static variable in class nxopen.preferences.SessionVisualizationHighQualityImage.ImageSizeType
-
- USER_DEFINED - Static variable in class nxopen.preferences.SessionVisualizationHighQualityImage.ResolutionType
-
- USER_DEFINED - Static variable in class nxopen.routing.UserDefined
-
User defined generated segment.
- USER_DEFINED - Static variable in class nxopen.tooling.BackingPadBuilder.Types
-
- USER_DEFINED - Static variable in class nxopen.tooling.BendInsertDesignBuilder.Types
-
user defined
- USER_DEFINED - Static variable in class nxopen.tooling.FormingInsertBuilder.BlankTypes
-
user Defined blank.
- USER_DEFINED - Static variable in class nxopen.tooling.GeneralInsertBuilder.GenerateMethod
-
- USER_DEFINED - Static variable in class nxopen.tooling.ScrapDesignBuilder.AddonType
-
Creates user defined add-on
- USER_DEFINED - Static variable in class nxopen.tooling.WallThicknessCheckerBuilder.RangeType
-
User-defined
- USER_DEFINED - Static variable in class nxopen.weld.WeldLabelBuilder.OrientationPlaneType
-
- USER_DEFINED - Static variable in class nxopen.weld.WeldObjectBuilder.CommandName
-
User Defined Weld command
- USER_DEFINED - Static variable in class nxopen.weld.WeldPmiBuilder.OrientationPlaneType
-
- USER_DEFINED_AND_NUMBER - Static variable in class nxopen.tooling.HoleManufacturingNoteBuilder.HoleIndexType
-
- USER_DEFINED_BLOCK - Static variable in class nxopen.tooling.WorkpieceBuilder.WorkPieceType
-
The method defines the block by user
- USER_DEFINED_CAM - Static variable in class nxopen.tooling.MotionSimulationBuilder.CamDefinitionType
-
Defines cam interactively
- USER_DEFINED_COMPONENT - Static variable in class nxopen.assemblies.Order.Type
-
User defined component order
- USER_DEFINED_DIAMETER_SYMBOL - Static variable in class nxopen.uf.UFDrf.DiameterSymbol
-
- USER_DEFINED_DIRECTION - Static variable in class nxopen.cae.responsesimulation.NodalFunctionEvalRequest
-
- USER_DEFINED_FEATURE - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
-
- USER_DEFINED_MARKER - Static variable in class nxopen.uf.UFMotion.MarkerType
-
- USER_DEFINED_PROFILE - Static variable in class nxopen.features.sheetmetal.GussetBuilder.Types
-
Gusset will be created using a profile defined by the user.
- USER_DEFINED_RADIUS_SYMBOL - Static variable in class nxopen.uf.UFDrf.RadiusSymbol
-
- USER_DEFINED_SXSEG - Static variable in class nxopen.uf.UFDraw.SxsegMode
-
- USER_DEFINED_SYMBOL - Static variable in class nxopen.annotations.OrdinateOriginDisplayOption
-
Displays user defined symbol at the ordinate origin
- USER_DEFINED_VALUES - Static variable in class nxopen.cam.TurnEngageRetractBuilder.AutoOptions
-
User Defined Values
- USER_DEFINED_VECTOR - Static variable in class nxopen.geometricutilities.PatternOrientation.ProjDirEnum
-
project along user defined vector.
- USER_DEFINED_WELD - Static variable in class nxopen.uf.UFConstants
-
- USER_KEY - Static variable in class nxopen.tooling.SpreadsheetData.ParameterStatus
-
Key parameter analyzed from spreadsheet search
- USER_KEY - Static variable in class nxopen.tooling.SpreadsheetDataParameter.Status
-
Key parameter analyzed from spreadsheet search
- USER_LOADED - Static variable in class nxopen.RuleManager.Filter
-
User classes that are loaded
- USER_NAME - Static variable in class nxopen.uf.UFClone.NamingTechnique
-
- USER_NAME_CONVERT - Static variable in class nxopen.uf.UFClone.ConvertCb
-
- USER_PARAMS - Static variable in class nxopen.uf.UFDpud.Purpose
-
- USER_PARAMS - Static variable in class nxopen.uf.UFUdop.Purpose
-
- USER_PLUS - Static variable in class nxopen.RuleManager.Filter
-
User and application classes
- USER_PLUS_LOADED - Static variable in class nxopen.RuleManager.Filter
-
User and application classes that are loaded
- USER_SELECTION - Static variable in class nxopen.formboard.FormboardLayoutBuilder.MainRunType
-
Manual selection of path.
- USER_SPECIFIED - Static variable in class nxopen.cae.modelcheck.AlignShellElementNormalBuilder.ConnectedElementScope
-
- USER_SPECIFIED - Static variable in class nxopen.cam.InspectionCmmCommandBuilder.IdnameMethods
-
Use user specified name for ID
- USER_SPECIFIED - Static variable in class nxopen.cam.InspectionCmmCommandBuilder.ProgramNameMethods
-
Use user specified name for program name
- USER_SPECIFIED - Static variable in class nxopen.cam.InspectionCmmCommandBuilder.RevMethods
-
Use user specified revision
- USER_SPECIFIED - Static variable in class nxopen.features.shipdesign.SectionViewBuilder.PlaneTypes
-
- USER_SPECIFIED - Static variable in class nxopen.routing.TransformPathBuilder.CopyAttributes
-
Copy Attributes as per user defined.
- USER_SPECIFIED_POINT - Static variable in class nxopen.cam.InspectionCmmCommandBuilder.HomePtMethods
-
Use a user specified point as the home point
- USER_VALUE - Static variable in class nxopen.cae.PostGraphBuilder.DataErrorHandling
-
User given value will used for those entities which do not have result value associated with them
- USER_VALUE - Static variable in class nxopen.cae.PostGraphBuilder.EvalutionErrors
-
- userAbort - Variable in class nxopen.uf.UFPart.LoadStatus
-
- userAddonCurve() - Method in interface nxopen.tooling.ScrapDesignBuilder
-
Returns the user defined add-on curve to create overlap+overcut
License requirements: None.
- useRadialDirectionToggle() - Method in interface nxopen.geometricutilities.CircularPattern
-
Returns the UseRadialDirection toggle attribute.
- useRadialDirectionToggle() - Method in interface nxopen.geometricutilities.PolygonPattern
-
Returns the UseRadialDirection toggle attribute.
- userAttributeErrorList - Variable in class nxopen.uf.UFSf.MeshErrorContainer
-
- userBasePoint() - Method in interface nxopen.display.ImageBaseBuilder
-
Returns the user defined base point.
- userClassesList - Variable in class nxopen.uf.UFKfUgmgr.ListUserClassesReferencedData
-
- userCoordinateSystem() - Method in interface nxopen.weld.WeldPmiBuilder
-
Returns the user specified coordinate system.
- userCsys() - Method in interface nxopen.features.shipdesign.InverseBendingLinesBuilder
-
Returns the user defined CSYS used to locate and orient the tables and diagrams.
- userCsys() - Method in interface nxopen.weld.WeldLabelBuilder
-
Returns the user specified coordinate system.
- userData() - Method in interface nxopen.cae.PostGraphBuilder
-
Returns the error handling value used when error occurs or no data present on entities
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- userDefined() - Method in interface nxopen.cam.StepoverBuilder
-
Returns the user defined builder
License requirements: None.
- USERDEFINED - Static variable in class nxopen.motion.VobjectCsysType
-
User defined csys type
- UserDefined - Class in nxopen.routing
-
- USERDEFINED - Static variable in class nxopen.tooling.ReusableObjectPasteBuilder.PasteMethods
-
UserDefined
- userDefined - Variable in class nxopen.uf.UFMotion.LinkMassProperties
-
- UserDefinedClass - Interface in nxopen.userdefinedobjects
-
- userDefinedClass() - Method in interface nxopen.userdefinedobjects.UserDefinedObject
-
- UserDefinedClass.AllowOwnedObjectSelection - Class in nxopen.userdefinedobjects
-
Allow owned object selection on all objects owned by an object of this
UserDefinedClass
.
- UserDefinedClass.AllowQueryClass - Class in nxopen.userdefinedobjects
-
- UserDefinedClass.DisplayCallback - Interface in nxopen.userdefinedobjects
-
Prototype for display, selection, attention point, fit and screen-size-fit callbacks
- UserDefinedClass.GenericCallback - Interface in nxopen.userdefinedobjects
-
Prototype for information, edit, and suppress callbacks
- UserDefinedClass.LinkCallback - Interface in nxopen.userdefinedobjects
-
Prototype for update, and delete callbacks
- UserDefinedClass.Selection - Class in nxopen.userdefinedobjects
-
- userDefinedClassManager() - Method in interface nxopen.Session
-
- UserDefinedClassManager - Interface in nxopen.userdefinedobjects
-
JA interface for the UserDefinedClassManager object
To obtain an instance of this class, refer to
Session
Created in NX5.0.0
- userDefinedDieInsertClearance() - Method in interface nxopen.tooling.PiercingInsertBuilder
-
Returns the user defined die insert clearance.
- userDefinedDieInsertHeight() - Method in interface nxopen.tooling.PiercingInsertBuilder
-
Returns the user defined die insert height.
- userDefinedDirection() - Method in interface nxopen.cae.responsesimulation.NodalFunctionEvaluationSettingBuilder
-
Returns the user defined direction
License requirements: nx_response_anlys ("NX Response Analysis")
.
- userDefinedDirection() - Method in interface nxopen.cae.responsesimulation.RmsResultsEvaluationSettingBuilder
-
- userDefinedDirection() - Method in interface nxopen.cae.responsesimulation.TranslationalNodalFunctionExcitationBuilder
-
Returns the magnitude direction
License requirements: nx_response_anlys ("NX Response Analysis")
.
- UserDefinedDisplayEvent - Interface in nxopen.userdefinedobjects
-
Implements the Display Event Object for UDO's .
- UserDefinedEvent - Interface in nxopen.userdefinedobjects
-
Implements the Event Object for UDO's .
- UserDefinedEvent.Reason - Class in nxopen.userdefinedobjects
-
- UserDefinedFeatureApplicationData - Interface in nxopen.features
-
JA interface for UserDefinedFeatureApplicationData object .
- UserDefinedFeatureApplicationField - Interface in nxopen.features
-
JA interface for UserDefinedFeatureApplicationField object .
- UserDefinedFeatureClass - Interface in nxopen.features
-
JA interface for UserDefinedFeatureClass
An instance of this class can be obtained from Features.UserDefinedFeatureClassManager#createClass
Created in NX8.0.0
- UserDefinedFeatureClass.CopyCallback - Interface in nxopen.features
-
Prototype for copy callbacks
- UserDefinedFeatureClass.CreateCallback - Interface in nxopen.features
-
Prototype for create callbacks
- UserDefinedFeatureClass.EditCallback - Interface in nxopen.features
-
Prototype for edit callbacks
- UserDefinedFeatureClass.IconCallback - Interface in nxopen.features
-
Prototype for icon callbacks
- UserDefinedFeatureClass.UpdateCallback - Interface in nxopen.features
-
Prototype for update callbacks
- UserDefinedFeatureClassManager - Interface in nxopen.features
-
JA interface for the UserDefinedFeatureClassManager object
To obtain an instance of this class, refer to
Session
Created in NX8.0.0
- userDefinedFeatureClassManager() - Method in interface nxopen.Session
-
- UserDefinedFeatureCopyEvent - Interface in nxopen.features
-
JA interface for the UserDefinedFeatureCopyEvent object
This calls cannot be created
.
- UserDefinedFeatureCreateEvent - Interface in nxopen.features
-
JA interface for the UserDefinedFeatureCreateEvent object
This calls cannot be created
.
- UserDefinedFeatureEditEvent - Interface in nxopen.features
-
JA interface for the UserDefinedFeatureEditEvent object
This calls cannot be created
.
- UserDefinedFeatureExpressionData - Interface in nxopen.features
-
JA interface for UserDefinedFeatureExpressionData object.
- UserDefinedFeatureIconEvent - Interface in nxopen.features
-
JA interface for the UserDefinedFeatureIconEvent object
This calls cannot be created
.
- UserDefinedFeatureReferenceData - Interface in nxopen.features
-
JA interface for UserDefinedFeatureReference object.
- UserDefinedFeatureUpdateEvent - Interface in nxopen.features
-
JA interface for the UserDefinedFeatureUpdateEvent object
This calls cannot be created
.
- userDefinedFunction() - Method in interface nxopen.cae.responsesimulation.TranslationalNodalFunctionExcitationBuilder
-
Returns the magnitude function
License requirements: nx_response_anlys ("NX Response Analysis")
.
- userDefinedInterLaminarFailureTheory() - Method in interface nxopen.cae.Laminate
-
Returns the user defined interlaminar failure theory name used in an extruded solid laminate
License requirements: None.
- userDefinedInterLaminarFailureTheory() - Method in interface nxopen.cae.LaminatePly
-
Returns the user defined interlaminar failure theory name used in a solid laminate nastran analysis (PCOMPS)
License requirements: None.
- UserDefinedLinkEvent - Interface in nxopen.userdefinedobjects
-
Implements the Display Event Object for UDO's .
- userDefinedMidSurfaceSelection() - Method in interface nxopen.features.MidSurfaceByFacePairsBuilder
-
Returns the user defined sheet selection.
- UserDefinedMoveBuilder - Interface in nxopen.cam
-
- userDefinedObject() - Method in interface nxopen.userdefinedobjects.UserDefinedEvent
-
Returns the related UDO.
- UserDefinedObject - Interface in nxopen.userdefinedobjects
-
JA interface for the UserDefinedObject object .
- UserDefinedObject.LinkDefinition - Class in nxopen.userdefinedobjects
-
Contains the linked object and it's status along with the type of link.
- UserDefinedObject.LinkStatus - Class in nxopen.userdefinedobjects
-
Status of the object linked to a nxopen.features.UserDefinedObjectFeature
- UserDefinedObject.LinkType - Class in nxopen.userdefinedobjects
-
Available link types for a nxopen.features.UserDefinedObjectFeature
.
- UserDefinedObjectDisplayContext - Interface in nxopen.userdefinedobjects
-
This class is used to display User Defined Objects .
- UserDefinedObjectDisplayContext.FacetType - Class in nxopen.userdefinedobjects
-
The enumerated type facet to be displayed
- UserDefinedObjectDisplayContext.PolyMarker - Class in nxopen.userdefinedobjects
-
This enumerated type specifies the type of marker to be displayed.
- UserDefinedObjectDisplayContext.StandardTextRef - Class in nxopen.userdefinedobjects
-
This enumerated type specifies the type of reference point used in the text box
for standard_text methods.
- UserDefinedObjectDisplayContext.TextRef - Class in nxopen.userdefinedobjects
-
This enumerated type specifies the type of reference point used in the text box.
- UserDefinedObjectDisplayContext.TextSize - Class in nxopen.userdefinedobjects
-
Provides a way to specify the size of the desired text, as small,
medium or large (normal is a synonym for medium).
- UserDefinedObjectDisplayContext.ViewMode - Class in nxopen.userdefinedobjects
-
The enumerated view mode
- UserDefinedObjectDisplayContext.ViewModeData - Class in nxopen.userdefinedobjects
-
- userDefinedObjectManager() - Method in interface nxopen.BasePart
-
- UserDefinedObjectManager - Interface in nxopen.userdefinedobjects
-
This class creates and manages UserDefinedObjects
To obtain an instance of this class, refer to
BasePart
Created in NX5.0.0
- UserDefinedObjectManager.LinkedUdoDefinition - Class in nxopen.userdefinedobjects
-
Used to define a link to a UserDefinedObject
- UserDefinedOpr - Interface in nxopen.cam
-
Represents a User Defined operation
To create or edit an instance of this class, use
UserDefinedOprBuilder
Created in NX7.5.0
- UserDefinedOprBuilder - Interface in nxopen.cam
-
Represents a UserDefinedOpr Builder
This is an abstract class, and cannot be instantiated.
- userDefinedPlane() - Method in interface nxopen.annotations.PlaneBuilder
-
Returns the user-defined plane used by the operation
License requirements: None.
- userDefinedPlyFailureTheory() - Method in interface nxopen.cae.Laminate
-
Returns the user defined ply failure theory name used in an extruded solid laminate
License requirements: None.
- userDefinedPlyFailureTheory() - Method in interface nxopen.cae.LaminatePly
-
Returns the user defined ply failure theory name used in a solid laminate nastran analysis (PCOMPS)
License requirements: None.
- userDefinedProjDir() - Method in interface nxopen.geometricutilities.PatternOrientation
-
Returns the userDefinedProjDir, a vector for user defined follow face project direction.
- userDefinedPunchEnd() - Method in interface nxopen.tooling.PiercingInsertBuilder
-
Returns the user defined punch end
License requirements: None.
- userDefinedPunchPenetration() - Method in interface nxopen.tooling.PiercingInsertBuilder
-
Returns the user defined punch penetration.
- userDefinedPunchStart() - Method in interface nxopen.tooling.PiercingInsertBuilder
-
Returns the user defined punch start
License requirements: None.
- UserDefinedSolidBeamSection - Interface in nxopen.cae
-
- UserDefinedSolidBeamSectionBuilder - Interface in nxopen.cae
-
- userDefinedSymbolCfw - Variable in class nxopen.uf.UFDrf.SymbolPreferences
-
- userDefinedSymbolColor() - Method in interface nxopen.annotations.SymbolStyleBuilder
-
Returns the user defined symbol color
License requirements: None.
- userDefinedSymbolFont() - Method in interface nxopen.annotations.SymbolStyleBuilder
-
Returns the user defined symbol font
License requirements: None.
- userDefinedSymbolWidth() - Method in interface nxopen.annotations.SymbolStyleBuilder
-
Returns the user defined symbol width
License requirements: None.
- userDefinedTemplates() - Method in interface nxopen.Part
-
Returns the UserDefinedTemplate.Collection instance belonging to this part
Created in NX10.0.0
- userDefinedText() - Method in interface nxopen.annotations.OrdinateDimensionPreferences
-
Returns the user defined text, if the user defined symbol option is used to display the origin
License requirements: None.
- userDefinedText() - Method in interface nxopen.annotations.OrdinateStyleBuilder
-
Returns the ordinate origin user defined text
License requirements: None.
- UserDefinedWeld - Interface in nxopen.weld
-
Represents a User Defined Weld feature.
- UserDefinedWeldBuilder - Interface in nxopen.weld
-
- userDfaClasses - Variable in class nxopen.uf.UFKfUgmgr.AskUserDfaClassesData
-
- userDfaFuncs - Variable in class nxopen.uf.UFKfUgmgr.AskUserDfaFuncsData
-
- userDimText - Variable in class nxopen.uf.UFDrf.Text
-
- useRearHeadRests() - Method in interface nxopen.features.vehicledesign.AllAroundVisionBuilder
-
Returns the indication if rear head rests geometry should be used.
- useRefPt - Variable in class nxopen.uf.UFDraw.ViewInfo
-
- useRefset() - Method in interface nxopen.JtCreator
-
Returns the useRefset * - Specifies from which reference the data should be written to JT file
License requirements: None.
- useRepairTolerance() - Method in interface nxopen.preferences.SessionNXGateway
-
Returns the use repair tolerance flag.
- userExitCiBuilder() - Method in interface nxopen.cam.SurfaceContourBuilder
-
Returns the CAM Exit name builder in User Defined Drive Method builder
License requirements: None.
- userFuncsList - Variable in class nxopen.uf.UFKfUgmgr.ListUserFuncsReferencedData
-
- userFunction() - Method in interface nxopen.cae.LaminateDynamicEventBuilder
-
Returns the function.
- userFunctionBeforeDialogDestroy(int) - Method in interface nxopen.motion.PostProcess.UserFunctionBeforeDialogDestroy
-
Post process user function callback before dialog destroy, This callback function will be call when user click the user button.
- userGroupDelete(int) - Method in interface nxopen.cae.Post
-
Rename a User Group.
- userGroupRename(int, String) - Method in interface nxopen.cae.Post
-
Delete a User Group.
- userInsertionPoint() - Method in interface nxopen.display.ImageBaseBuilder
-
Returns the user defined insertion point
License requirements: None.
- userInterface() - Method in interface nxopen.preferences.PartPreferences
-
Returns object for doing User Interface preferences settings applicable to displayed part .
- userInterface() - Method in interface nxopen.preferences.SessionPreferences
-
Returns object for doing Selection preferences settings applicable to entire session .
- userInterfacePreferences() - Method in interface nxopen.UI
-
the UI based User Interface Preferences in the current session .
- userName() - Method in interface nxopen.cae.BaseResultType
-
Returns the user defined name of this result type
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- username() - Method in interface nxopen.routing.DesignRuleViolationViewer
-
Returns the username who has overridden design Rule violation
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- userName() - Method in interface nxopen.tooling.ConcurrentDesignManagementBuilder
-
Returns the user name to login.
- userName - Variable in class nxopen.uf.UF.SystemInfo
-
- useRowHdrGridLines - Variable in class nxopen.uf.UFDraw.TabnotParams
-
- userPrompt() - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
Returns the user prompt
License requirements: None.
- userPrompt() - Method in interface nxopen.visualreporting.Condition
-
- userReferenceDirection() - Method in interface nxopen.display.ImageBaseBuilder
-
Returns the user defined reference direction vector.
- userSelectedMidsurface - Variable in class nxopen.uf.UFModeling.AskFacepairParmsData
-
- userSelectedObjects() - Method in interface nxopen.geometricutilities.BlendLimitsData
-
Returns the use plane cap blend
License requirements: None.
- userSpecifiedConnectElements() - Method in interface nxopen.cae.modelcheck.AlignShellElementNormalBuilder
-
Returns the user specified connected elements to be aligned with seed element
License requirements: None.
- userSpecifiedUnit() - Method in interface nxopen.cae.MechanicalLoadSumBuilder
-
Returns the output result unit
License requirements: None.
- userSpecifiedUnit() - Method in interface nxopen.cae.SolidPropertyCheckBuilder
-
Returns the output result unit
License requirements: None.
- UserSymbolPreferences - Interface in nxopen.annotations
-
Represents preferences related to user-defined symbols .
- UserSymbolPreferences.SizeData - Class in nxopen.annotations
-
- UserSymbolPreferences.SizeType - Class in nxopen.annotations
-
Specifies whether length and height or scale and aspect ratio is used
in specifying the size of the symbol
- UserSymbolSizeData() - Constructor for class nxopen.annotations.SimpleDraftingAid.UserSymbolSizeData
-
- usertypename() - Method in interface nxopen.cae.ResultVariable
-
Returns the Result type username
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- useSameStock() - Method in interface nxopen.routing.PlatformCreatorBuilder
-
Returns the internal frame use same stock option
License requirements: routing_platform ("Routing Platform")
.
- useSaveAs() - Method in interface nxopen.features.MasterCutBuilder
-
Returns the flag whether or not to save the work view with a new name
License requirements: solid_modeling ("SOLIDS MODELING")
.
- useSceneLights() - Method in interface nxopen.ModelingView
-
Changes the set of lights used in the given view to the
"Scene" set, which for now includes the eight predefined
scene lights (including the Scene Ambient light).
- useSearchDirs - Variable in class nxopen.uf.UFPart.ImportPartModes
-
- useSeedFace() - Method in interface nxopen.weld.WeldFillBuilder
-
Returns the indication if the selected faces should be used as seed faces.
- useSegmentedBends() - Method in interface nxopen.features.sheetmetal.LoftedFlangeBuilder
-
Returns the use multi segment bends
Set use_segmented_bends to true or false and get the same
If use multi segment bends is set to true then lofted flange bend face is gets divided as per the number bend segments mentioned by the user
License requirements: None.
- useShadowCatcher() - Method in interface nxopen.display.Shadows
-
Returns the Shadow Catcher
License requirements: None.
- usesMasterModel() - Method in interface nxopen.FileNew
-
Returns the uses master model flag of the underlying template which is used for the new file being created.
- useSmfeatTog() - Method in interface nxopen.tooling.InitProjBuilder
-
Returns the option to use SMD features
License requirements: None.
- useSolvingTolerance() - Method in interface nxopen.preferences.SessionSketch
-
Returns the sketch solving tolerance flag.
- useSolvingTolerance() - Method in interface nxopen.preferences.SketchPreferences
-
Returns the sketch solving tolerance flag.
- useSourceMeshCollector() - Method in interface nxopen.cae.ElementModifyTypeBuilder
-
Returns the option to use source mesh collector as a destination mesh collector
License requirements: None.
- useSpecificDirection() - Method in interface nxopen.features.PoleSmoothingBuilder
-
Returns the specific moving direction
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- useSplinePoint() - Method in interface nxopen.MeshParameterData
-
Returns
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- useSplineToDefineSurface() - Method in interface nxopen.cae.optimization.TBSShapeLinkCondition
-
Returns the option whether to use surface parameters, which is avaliable whenCAE.Optimization.TBSShapeLinkCondition#manufacturingType
and CAE.Optimization.TBSShapeLinkCondition#setManufacturingType
is set to
CAE.Optimization.TBSShapeLinkCondition.ManufacturingOption#SURFACE_STAMP
, or
CAE.Optimization.TBSShapeLinkCondition.ManufacturingOption#SURFACE_TURN
, or
CAE.Optimization.TBSShapeLinkCondition.ManufacturingOption#SURFACE_DRILL
License requirements: None.
- useStabilizerBar() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
Returns the option to specify whether or not the stabilizer bar is used.
- useStageSizeAndOrientation() - Method in interface nxopen.display.Background
-
Returns whether to use stage Size and Orientation
License requirements: None.
- useStandardLoading() - Method in interface nxopen.features.vehicledesign.VisionPlaneBuilder
-
Returns the option that determines whether to use the loading specified by standard or not.
- useStandardLoading() - Method in interface nxopen.features.vehicledesign.WindshieldDatumBuilder
-
Returns the option that determines whether to use the loading specified by standard or not.
- useStartLimit - Variable in class nxopen.uf.UFModl.BlendFacesLimitData
-
- useStartSectionFile() - Method in interface nxopen.IgesCreator
-
Returns the use start section file - set to true if want to specify text file for start section
License requirements: None.
- useStrainGageData(String, String, String, int, int, int, int) - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder
-
Use straingage data.
- useStripperPlateClearance() - Method in interface nxopen.tooling.BendInsertDesignBuilder
-
Returns the option to use stripper plate clearance.
- useStripperPlateClearance() - Method in interface nxopen.tooling.FormingInsertBuilder
-
Returns the option to use stripper plate clearance.
- useStripperPlateClearance() - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
Returns the option to stripper plate clearance.
- useSurfaceApproximation() - Method in interface nxopen.features.ShellBuilder
-
Returns the option to use approximate surfaces for the Shell operation.
- useSurfaceNormal() - Method in interface nxopen.features.ConcaveFacesBuilder
-
Returns the surface normal vector toggle
License requirements: None.
- useSymbol() - Method in interface nxopen.tooling.ChannelFittingBuilder
-
Returns the value which specifies whether to add real component or not.
- useSymbol() - Method in interface nxopen.tooling.SpecifyCircuitBuilder
-
Returns the value which specifies whether to add real component or not.
- useSystemPrecision() - Method in interface nxopen.preferences.SessionUserInterfaceUI
-
Returns the use system precision flag.
- useTangentEdgeAngles() - Method in interface nxopen.cam.GeometrySet
-
Returns the use tangent edge angle flag
License requirements: None.
- useTangentEdgeAngles() - Method in interface nxopen.cam.SurfaceRegions
-
Returns the use tangent edge angle flag
License requirements: None.
- useTangentEdgeAngles() - Method in interface nxopen.features.ExtractFaceBuilder
-
Returns the use tangent angles
License requirements: None.
- useTaperedShank() - Method in interface nxopen.cam.MillingToolBuilder
-
Returns the use tapered shank
License requirements: None.
- useTargetPoint() - Method in interface nxopen.display.CameraBuilder
-
Returns whether to use the target point
License requirements: None.
- useTitleCell - Variable in class nxopen.uf.UFDraw.TabnotParams
-
- useToolHolder() - Method in interface nxopen.cam.CutParameters
-
Returns the use tool holder
License requirements: None.
- useTranslucency() - Method in interface nxopen.drawings.ViewWorkflowBuilder
-
Returns the use translucency determines translucency settings for faces when displaying a drawing sheet
License requirements: None.
- useTriangularMesh() - Method in interface nxopen.preferences.SessionModeling
-
Returns the use triangular mesh setting setting.
- useTwoArrows() - Method in interface nxopen.annotations.CuttingPlaneSymbolBuilder
-
Returns the use two arrows
License requirements: None.
- useType() - Method in interface nxopen.mechatronics.ProxyObjectBuilder
-
Returns the use type used in the proxy object.
- useUnderAxleSurface() - Method in interface nxopen.features.vehicledesign.GroundClearanceBuilder
-
Returns the indication if the under axle surface will be created.
- useUnspecified() - Method in interface nxopen.cae.BCSelectionDisplayBuilder
-
Returns a value indicating whether the builder will display polygonal geometry or mesh,
which do not have these BCs specified on them, with the unspecifed color
License requirements: None.
- useUserDefinedTp() - Method in interface nxopen.cam.HoleMakingBuilder
-
Returns the user defined tool path flag
License requirements: None.
- useVehiclePackagingData() - Method in interface nxopen.HumanPosturePredictionBuilder
-
Returns the flag of using vehicle package data, if true, use data from vehicle package, otherwize use
customer defined vehicle data
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- useVertGridLines - Variable in class nxopen.uf.UFDraw.TabnotParams
-
- usewidthscale - Variable in class nxopen.preferences.PartVisualizationLine.PixelWidthOptionsData
-
If true, width appearance in the graphics window is controlled
by width scale.
- useWireFrameOnly() - Method in interface nxopen.features.vehicledesign.AllAroundVisionBuilder
-
Returns the indication if only wire frame should be used.
- useWithAdvancedStudioImageBasedLighting() - Method in interface nxopen.display.LightBuilder
-
Returns the flag to indicate whether the given light is to be used with image based lighting in the advanced studio display.
- useWithIbl() - Method in interface nxopen.display.LightBuilder
-
- useWithRayTracedImageBasedLighting() - Method in interface nxopen.display.LightBuilder
-
Returns the flag to indicate whether the given light is to be used with image based lighting in ray traced rendering.
- useYDirectionToggle() - Method in interface nxopen.geometricutilities.AlongPathPattern
-
Returns the UseYDirection toggle attribute.
- useYDirectionToggle() - Method in interface nxopen.geometricutilities.RectangularPattern
-
Returns the UseYDirection toggle attribute.
- USHAPED - Static variable in class nxopen.features.sheetmetal.BeadBuilder.CrossSectionTypeOptions
-
- USHAPED - Static variable in class nxopen.uf.UFModl.BeadShape
-
- USING_LAYOUT - Static variable in class nxopen.PlotBuilder.PlotTypes
-
Plot Using a Layout
- usingDrapingMeshSize() - Method in interface nxopen.cae.LaminateDrapingDataBuilder
-
Returns the method used
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- usingPhysicalHysteretic() - Method in interface nxopen.cae.responsesimulation.PhysicalDampingSettings
-
Returns the usage setting for physical hysteretic damping
License requirements: nx_response_anlys ("NX Response Analysis")
.
- usingPhysicalHysteretic() - Method in interface nxopen.motion.FlexPhysicalDampingSettings
-
Returns the usage setting for physical hysteretic damping
License requirements: mechanisms ("MECHANISMS")
.
- usingPhysicalViscous() - Method in interface nxopen.cae.responsesimulation.PhysicalDampingSettings
-
Returns the usage setting for physical viscous damping
License requirements: nx_response_anlys ("NX Response Analysis")
.
- usingPhysicalViscous() - Method in interface nxopen.motion.FlexPhysicalDampingSettings
-
Returns the usage setting for physical viscous damping
License requirements: mechanisms ("MECHANISMS")
.
- usingUserDefinedDirection() - Method in interface nxopen.cae.responsesimulation.NodalFunctionEvaluationSettingBuilder
-
Returns the option of using user defined direction
License requirements: nx_response_anlys ("NX Response Analysis")
.
- usingUserDefinedDirection() - Method in interface nxopen.cae.responsesimulation.RmsResultsEvaluationSettingBuilder
-
- USLOT - Static variable in class nxopen.uf.UFModl.SlotType
-
- ustart() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns the U start parameter
License requirements: None.
- ustart() - Method in interface nxopen.geometricutilities.SurfaceRangeBuilder
-
Returns the u start
License requirements: None.
- ustart - Variable in class nxopen.uf.UFCurve.AnalysisDisplay
-
- ustartDeg() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns the U start degrees
License requirements: None.
- ustartDist() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns the U start distance
License requirements: None.
- ustartDistance() - Method in interface nxopen.geometricutilities.LocalUntrimBuilder
-
Returns the U start distance.
- ustartLimit() - Method in interface nxopen.geometricutilities.LocalUntrimBuilder
-
Returns the region limit of U start.
- ustartMode() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns the start U mode
License requirements: None.
- ustartSweep() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns the U start sweep degrees
License requirements: None.
- uStatus - Variable in class nxopen.uf.UFModeling.AskFacePeriodicityData
-
- USTRIP - Static variable in class nxopen.cam.InspectionPathBuilder.SequenceType
-
U strip
- UTF8 - Static variable in class nxopen.preferences.SessionUserInterface.JournalFileFormatType
-
UTF 8
- UTF8 - Static variable in class nxopen.uf.UFText.ModeS
-
- UTF8STRING - Static variable in class nxopen.options.OptionType
-
Option value is a utf8 string
- UTF8STRING_LIST - Static variable in class nxopen.options.OptionType
-
Option value is a list of utf8 strings
- UTILITY_SYMBOL - Static variable in class nxopen.uf.UFDrf.AssocType
-
- utilityFunctionVisibilityHandler(boolean) - Method in interface nxopen.UI.UtilityFunctionVisibilityHandler
-
User defined method is called whenever an NX utility function state changes.
- utilization() - Method in interface nxopen.tooling.BlankNestingBuilder
-
Returns the maximum material utilization of the blank.
- UV - Static variable in class nxopen.display.CgfxMattexBuilder.TextureSpaceShader
-
Deprecated.
scale 1, 0 offset uv texture space
- UV - Static variable in class nxopen.geometricutilities.RefitControlBuilder.RefitControlDirection
-
u and v
- uv - Variable in class nxopen.uf.UFEvalsf.Pos3
-
- uv - Variable in class nxopen.uf.UFSo.DirrOnSurfData
-
- uv - Variable in class nxopen.uf.UFSo.OffsetSurfCvtrData
-
- UV_TEXTURE_SPACE - Static variable in class nxopen.uf.UFDisp.TextureSpaceType
-
- UVBOX_GEOM - Static variable in class nxopen.uf.UFBrep.GeomType
-
- UVGRID - Static variable in class nxopen.cam.InspectionMethodBuilder.OperationTypes
-
Point Set (Rectangular UV Grid)
- uvgrid() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns a flag to indicate if rectangular UV grid is allowed
License requirements: None.
- uvGrid() - Method in interface nxopen.drawings.GeneralViewStyle
-
Returns the status of UV grid, if true, grid curves for selected drawing
member views are added else the grid curves are removed from
the selected member views.
- uvgrid() - Method in interface nxopen.drawings.ViewStyleGeneralBuilder
-
Returns the uvgrid toggle on the GENERAL tab of the View Style Dialog
License requirements: None.
- uvGrid() - Method in interface nxopen.preferences.GeneralViewPreferences
-
Returns the status of UV grid.
- uvhatch - Variable in class nxopen.uf.UFDraw.ViewPrfs
-
- UVHATCH_CURVE - Static variable in class nxopen.drawings.DraftingCurveInfo.DraftingCurveType
-
Specifies UVHatch Curve
- UVHATCH_OFF - Static variable in class nxopen.uf.UFDraw.Uvhatch
-
- UVHATCH_ON - Static variable in class nxopen.uf.UFDraw.Uvhatch
-
- uvorientation() - Method in interface nxopen.features.NSidedSurfaceBuilder
-
Returns the UV orientation
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- UZBEND - Static variable in class nxopen.tooling.BendInsertDesignBuilder.BendTypeOption
-
universal z bend