public interface PiercingInsertBuilder extends Builder
PiercingInsertCollection.createPiercingInsertBuilder()
Property | Value |
---|---|
AssociationTool | AddIntoList |
DieInsertType | DieInsert |
DieOffsetValue | 0 |
DieSameOffsetValue | 0 |
NormalBbpslug | Fillet |
NormalCavity | TaperAngle |
NormalClearance | 0.05 |
NormalClearanceOption | Constant |
NormalDsslug | Fillet |
NormalForEachScrap1 | 0 |
NormalForEachScrap2 | 0 |
NormalOffsetSide | DieSide |
NormalOnePunchToggle | 0 |
NormalRenameDialog | 0 |
NormalSlugPara1 | 3 |
NormalSlugPara2 | -3 |
NormalSlugPara3 | 2 |
NormalSlugPara4 | 3 |
OffsetLinearDimension.Value | 3 (millimeters part), 0.12 (inches part) |
Position | Bottom |
PunchOffsetValue | 0 |
PunchPocketClearanceForBP | 0 |
PunchPocketClearanceForPP | 0 |
PunchPocketClearanceForSP | 0 |
PunchPocketToggleForBP | 0 |
PunchPocketToggleForPP | 0 |
PunchPocketToggleForSP | 0 |
PunchPocketTypeInBP | Clearance |
PunchPocketTypeInPP | Clearance |
PunchPocketTypeInSP | Clearance |
PunchSameOffsetValue | 0 |
SlugHoleHeightLinearDimension.Value | 100 (millimeters part), 4 (inches part) |
UserDefinedDieInsertClearance | 0 |
UserDefinedDieInsertHeight.Value | 0 (millimeters part), 0 (inches part) |
UserDefinedPunchEnd.Value | 0 (millimeters part), 0 (inches part) |
UserDefinedPunchStart.Value | 0 (millimeters part), 0 (inches part) |
Modifier and Type | Interface and Description |
---|---|
static class |
PiercingInsertBuilder.AssociationToolType
Specifies the association tool operation option.
|
static class |
PiercingInsertBuilder.DieInsertTypeItems
Specifies the type of insert.
|
static class |
PiercingInsertBuilder.InsertPosition
Specifies the position of piercing inserts, for EDW only
|
static class |
PiercingInsertBuilder.NormalBbpslugType
Specifies the type of bottom plate slug.
|
static class |
PiercingInsertBuilder.NormalCavityType
Specifies the type of cavity.
|
static class |
PiercingInsertBuilder.NormalClearanceOptionType
Specifies the design option of piercing insert.
|
static class |
PiercingInsertBuilder.NormalDsslugType
Specifies the type of die shoe slug.
|
static class |
PiercingInsertBuilder.NormalOffsetSideType
Specifies the offset side of normal pierce insert design.
|
static class |
PiercingInsertBuilder.NormalUdpparentPartType
Specifies the parent part of user defined punch.
|
static class |
PiercingInsertBuilder.PunchPocketTypeItemsBP
Specifies the punch pocket type in backing plate.
|
static class |
PiercingInsertBuilder.PunchPocketTypeItemsPP
Specifies the punch pocket type in punch plate.
|
static class |
PiercingInsertBuilder.PunchPocketTypeItemsSP
Specifies the punch pocket type in stripper plate.
|
static class |
PiercingInsertBuilder.Types
Specifies the option of piercing insert type.
|
Modifier and Type | Method and Description |
---|---|
void |
addDieInsertPart()
Add user defined die insert or backing insert part.
|
void |
addStripperInsert()
Add standard stripper insert.
|
PiercingInsertBuilder.AssociationToolType |
associationTool()
Returns the association tool type.
|
boolean |
conceptDesign()
Returns the value indicating if the design is for a concept.
|
void |
createUserDefinedDieInsert()
Create user defined die insert or backing insert for selected scraps.
|
void |
createUserDefinedInsertDatumPlane()
Create datum plane for user defined die or backing insert outline.
|
void |
dieEditOffsetValueTable()
Edit offset value table.
|
PiercingInsertBuilder.DieInsertTypeItems |
dieInsertType()
Returns the die insert type.
|
double |
dieOffsetValue()
Returns the die offset value.
|
boolean |
dieSameOffsetValue()
Returns the same offset value option of die design.
|
void |
linkButton()
Link the selected insert with the selected scrap.
|
String |
newPartNames()
Returns the new component names.
|
PiercingInsertBuilder.NormalBbpslugType |
normalBbpslug()
Returns the bottom plate slug type for normal pierce design.
|
PiercingInsertBuilder.NormalCavityType |
normalCavity()
Returns the cavity type for normal pierce design.
|
double |
normalClearance()
Returns the clearance value for normal pierce design.
|
PiercingInsertBuilder.NormalClearanceOptionType |
normalClearanceOption()
Returns the clearance option for normal pierce design.
|
void |
normalCreateCavityAndSlug()
Create cavity and slug for normal pierce design.
|
void |
normalCreateUdp()
Create user defined punch for normal pierce design.
|
PiercingInsertBuilder.NormalDsslugType |
normalDsslug()
Returns the die shoe slug type for normal pierce design.
|
boolean |
normalForEachScrap1()
Returns the each scrap option of bottom plate slug for normal pierce design.
|
boolean |
normalForEachScrap2()
Returns the each scrap option of die shoe slug for normal pierce design.
|
void |
normalLoadDie()
Load standard die insert for normal pierce design.
|
void |
normalLoadStandardPunch()
Load standard punch for normal pierce design.
|
PiercingInsertBuilder.NormalOffsetSideType |
normalOffsetSide()
Returns the offset side option for normal pierce design.
|
boolean |
normalOnePunchToggle()
Returns the one punch option for normal pierce design.
|
String |
normalPunchLength()
Returns the punch length for normal pierce design.
|
boolean |
normalRenameDialog()
Returns the rename dialog option for normal pierce design.
|
SelectBodyList |
normalSelectPierceDieInsert()
Returns the select pierce die insert to be edited.
|
SelectBodyList |
normalSelectPiercePunch()
Returns the select pierce punch insert to be edited.
|
double |
normalSlugPara1()
Returns the H value of slug hole for normal pierce design.
|
double |
normalSlugPara2()
Returns the A value of slug hole for normal pierce design.
|
double |
normalSlugPara3()
Returns the C1 value of slug hole for normal pierce design.
|
double |
normalSlugPara4()
Returns the C2 value of slug hole for normal pierce design.
|
Expression |
offsetLinearDimension()
Returns the offset linear dimension
License requirements: None. |
String |
parentPartName()
Returns the parent part name to create insert.
|
PiercingInsertBuilder.InsertPosition |
position()
Returns the reverse direction
License requirements: None. |
void |
punchEditOffsetValueTable()
Edit offset value table.
|
double |
punchOffsetValue()
Returns the punch offset value.
|
double |
punchPocketClearanceForBP()
Returns the punch pocket clearance for backing plate.
|
double |
punchPocketClearanceForPP()
Returns the punch pocket clearance for punch plate.
|
double |
punchPocketClearanceForSP()
Returns the punch pocket clearance for stripper plate.
|
double |
punchPocketHeightInSP()
Returns the punch pocket height in the stripper plate.
|
boolean |
punchPocketToggleForBP()
Returns the punch pocket toggle for backing plate.
|
boolean |
punchPocketToggleForPP()
Returns the punch pocket toggle for punch plate.
|
boolean |
punchPocketToggleForSP()
Returns the punch pocket toggle for stripper plate.
|
PiercingInsertBuilder.PunchPocketTypeItemsBP |
punchPocketTypeInBP()
Returns the punch pocket type in backing plate.
|
PiercingInsertBuilder.PunchPocketTypeItemsPP |
punchPocketTypeInPP()
Returns the punch pocket type in punch plate.
|
PiercingInsertBuilder.PunchPocketTypeItemsSP |
punchPocketTypeInSP()
Returns the punch pocket type in stripper plate.
|
boolean |
punchSameOffsetValue()
Returns the same offset value option of punch design.
|
SelectBodyList |
selectAssociationInsert()
Returns the selection of the inserts to create association.
|
SelectBodyList |
selectAssociationScrap()
Returns the selection of the scrap to create association.
|
SelectBodyList |
selectDieInsertForCavity()
Returns the select die insert for cavity.
|
Section |
selectDieInsertOutline()
Returns the select die insert outline.
|
SelectBodyList |
selectScrap()
Returns the select scraps for pierce insert design.
|
SelectFaceList |
selectScrapOrInsert()
Returns the select scrap or insert for association update.
|
SelectBodyList |
selectUserDefinedDieInsertForEdit()
Returns the selected user defined die insert to edit.
|
void |
setAssociationTool(PiercingInsertBuilder.AssociationToolType associationTool)
License requirements: None. |
void |
setConceptDesign(boolean conceptDesign)
License requirements: None. |
void |
setDieInsertType(PiercingInsertBuilder.DieInsertTypeItems dieInsertType)
License requirements: None. |
void |
setDieOffsetValue(double dieOffsetValue)
License requirements: None. |
void |
setDieSameOffsetValue(boolean dieSameOffsetValue)
License requirements: None. |
void |
setNewPartNames(String newPartNames)
License requirements: None. |
void |
setNormalBbpslug(PiercingInsertBuilder.NormalBbpslugType normalBbpslug)
License requirements: None. |
void |
setNormalCavity(PiercingInsertBuilder.NormalCavityType normalCavity)
License requirements: None. |
void |
setNormalClearance(double normalClearance)
License requirements: None. |
void |
setNormalClearanceOption(PiercingInsertBuilder.NormalClearanceOptionType normalClearanceOption)
License requirements: None. |
void |
setNormalDsslug(PiercingInsertBuilder.NormalDsslugType normalDsslug)
License requirements: None. |
void |
setNormalForEachScrap1(boolean normalForEachScrap1)
License requirements: None. |
void |
setNormalForEachScrap2(boolean normalForEachScrap2)
License requirements: None. |
void |
setNormalOffsetSide(PiercingInsertBuilder.NormalOffsetSideType normalOffsetSide)
License requirements: None. |
void |
setNormalOnePunchToggle(boolean normalOnePunchToggle)
License requirements: None. |
void |
setNormalPunchLength(String normalPunchLength)
License requirements: None. |
void |
setNormalRenameDialog(boolean normalRenameDialog)
License requirements: None. |
void |
setNormalSlugPara1(double normalSlugPara1)
License requirements: None. |
void |
setNormalSlugPara2(double normalSlugPara2)
License requirements: None. |
void |
setNormalSlugPara3(double normalSlugPara3)
License requirements: None. |
void |
setNormalSlugPara4(double normalSlugPara4)
License requirements: None. |
void |
setParentPartName(String parentPart)
License requirements: None. |
void |
setPosition(PiercingInsertBuilder.InsertPosition position)
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") . |
void |
setPunchOffsetValue(double punchOffsetValue)
License requirements: None. |
void |
setPunchPocketClearanceForBP(double punchPocketClearanceForBP)
License requirements: None. |
void |
setPunchPocketClearanceForPP(double punchPocketClearanceForPP)
License requirements: None. |
void |
setPunchPocketClearanceForSP(double punchPocketClearanceForSP)
License requirements: None. |
void |
setPunchPocketHeightInSP(double punchPocketHeightInSP)
License requirements: None. |
void |
setPunchPocketToggleForBP(boolean punchPocketToggleForBP)
License requirements: None. |
void |
setPunchPocketToggleForPP(boolean punchPocketToggleForPP)
License requirements: None. |
void |
setPunchPocketToggleForSP(boolean punchPocketToggleForSP)
License requirements: None. |
void |
setPunchPocketTypeInBP(PiercingInsertBuilder.PunchPocketTypeItemsBP punchPocketTypeInBP)
License requirements: None. |
void |
setPunchPocketTypeInPP(PiercingInsertBuilder.PunchPocketTypeItemsPP punchPocketTypeInPP)
License requirements: None. |
void |
setPunchPocketTypeInSP(PiercingInsertBuilder.PunchPocketTypeItemsSP punchPocketTypeInSP)
License requirements: None. |
void |
setPunchSameOffsetValue(boolean punchSameOffsetValue)
License requirements: None. |
void |
setSettingWithoutFalseBody(boolean settingWithoutFalseBody)
License requirements: None. |
boolean |
settingWithoutFalseBody()
Returns the option of whether to create false body for die or backing insert.
|
void |
setType(PiercingInsertBuilder.Types type)
License requirements: None. |
void |
setUserDefinedDieInsertClearance(double userDefinedDieInsertClearance)
License requirements: None. |
void |
setUserDefinedPunchPenetration(double userDefinedPunchPenetration)
License requirements: None. |
Expression |
slugHoleHeightLinearDimension()
Returns the slug hole height linear dimension
License requirements: None. |
PiercingInsertBuilder.Types |
type()
Returns the type of piercing insert.
|
void |
updatePosition()
Update position.
|
double |
userDefinedDieInsertClearance()
Returns the user defined die insert clearance.
|
Expression |
userDefinedDieInsertHeight()
Returns the user defined die insert height.
|
Expression |
userDefinedPunchEnd()
Returns the user defined punch end
License requirements: None. |
double |
userDefinedPunchPenetration()
Returns the user defined punch penetration.
|
Expression |
userDefinedPunchStart()
Returns the user defined punch start
License requirements: None. |
commit, destroy, getCommittedObjects, getObject, showResults
printTestData, printTestData, tag, tagValue
validate
PiercingInsertBuilder.Types type() throws NXException, RemoteException
NXException
RemoteException
void setType(PiercingInsertBuilder.Types type) throws NXException, RemoteException
type
- Indicates the type value of the dialog's types block to be set toNXException
RemoteException
SelectBodyList selectScrap() throws NXException, RemoteException
NXException
RemoteException
SelectBodyList selectDieInsertForCavity() throws NXException, RemoteException
NXException
RemoteException
PiercingInsertBuilder.DieInsertTypeItems dieInsertType() throws NXException, RemoteException
NXException
RemoteException
void setDieInsertType(PiercingInsertBuilder.DieInsertTypeItems dieInsertType) throws NXException, RemoteException
dieInsertType
- Indicates the type of insert to design, die insert or backing insertNXException
RemoteException
void normalLoadDie() throws NXException, RemoteException
NXException
RemoteException
void createUserDefinedInsertDatumPlane() throws NXException, RemoteException
NXException
RemoteException
Section selectDieInsertOutline() throws NXException, RemoteException
NXException
RemoteException
Expression userDefinedDieInsertHeight() throws NXException, RemoteException
NXException
RemoteException
double userDefinedDieInsertClearance() throws NXException, RemoteException
NXException
RemoteException
void setUserDefinedDieInsertClearance(double userDefinedDieInsertClearance) throws NXException, RemoteException
userDefinedDieInsertClearance
- Indicates the false body clearance value of user defined die or backing insertNXException
RemoteException
SelectBodyList selectUserDefinedDieInsertForEdit() throws NXException, RemoteException
NXException
RemoteException
void createUserDefinedDieInsert() throws NXException, RemoteException
NXException
RemoteException
void addDieInsertPart() throws NXException, RemoteException
NXException
RemoteException
PiercingInsertBuilder.NormalCavityType normalCavity() throws NXException, RemoteException
NXException
RemoteException
void setNormalCavity(PiercingInsertBuilder.NormalCavityType normalCavity) throws NXException, RemoteException
normalCavity
- Indicates the cavity type for normal pierce designNXException
RemoteException
double normalSlugPara1() throws NXException, RemoteException
NXException
RemoteException
void setNormalSlugPara1(double normalSlugPara1) throws NXException, RemoteException
normalSlugPara1
- Indicates the H value of slug hole for normal pierce designNXException
RemoteException
double normalSlugPara2() throws NXException, RemoteException
NXException
RemoteException
void setNormalSlugPara2(double normalSlugPara2) throws NXException, RemoteException
normalSlugPara2
- Indicates A value of slug hole for normal pierce designNXException
RemoteException
double normalSlugPara3() throws NXException, RemoteException
NXException
RemoteException
void setNormalSlugPara3(double normalSlugPara3) throws NXException, RemoteException
normalSlugPara3
- Indicates C1 value of slug hole for normal pierce designNXException
RemoteException
double normalSlugPara4() throws NXException, RemoteException
NXException
RemoteException
void setNormalSlugPara4(double normalSlugPara4) throws NXException, RemoteException
normalSlugPara4
- Indicates the C2 value of slug hole for normal pierce designNXException
RemoteException
Expression slugHoleHeightLinearDimension() throws NXException, RemoteException
NXException
RemoteException
Expression offsetLinearDimension() throws NXException, RemoteException
NXException
RemoteException
boolean normalForEachScrap1() throws NXException, RemoteException
NXException
RemoteException
void setNormalForEachScrap1(boolean normalForEachScrap1) throws NXException, RemoteException
normalForEachScrap1
- Indicates each scrap option of bottom plate slug for normal pierce designNXException
RemoteException
PiercingInsertBuilder.NormalBbpslugType normalBbpslug() throws NXException, RemoteException
NXException
RemoteException
void setNormalBbpslug(PiercingInsertBuilder.NormalBbpslugType normalBbpslug) throws NXException, RemoteException
normalBbpslug
- Indicates bottom plate slug type for normal pierce designNXException
RemoteException
boolean normalForEachScrap2() throws NXException, RemoteException
NXException
RemoteException
void setNormalForEachScrap2(boolean normalForEachScrap2) throws NXException, RemoteException
normalForEachScrap2
- Indicates each scrap option of die shoe slug for normal pierce designNXException
RemoteException
PiercingInsertBuilder.NormalDsslugType normalDsslug() throws NXException, RemoteException
NXException
RemoteException
void setNormalDsslug(PiercingInsertBuilder.NormalDsslugType normalDsslug) throws NXException, RemoteException
normalDsslug
- Indicates die shoe slug type for normal pierce designNXException
RemoteException
void dieEditOffsetValueTable() throws NXException, RemoteException
NXException
RemoteException
boolean dieSameOffsetValue() throws NXException, RemoteException
NXException
RemoteException
void setDieSameOffsetValue(boolean dieSameOffsetValue) throws NXException, RemoteException
dieSameOffsetValue
- Indicates the same offset value option of die designNXException
RemoteException
double dieOffsetValue() throws NXException, RemoteException
NXException
RemoteException
void setDieOffsetValue(double dieOffsetValue) throws NXException, RemoteException
dieOffsetValue
- Indicates the die offset valueNXException
RemoteException
SelectBodyList normalSelectPierceDieInsert() throws NXException, RemoteException
NXException
RemoteException
void normalCreateCavityAndSlug() throws NXException, RemoteException
NXException
RemoteException
void normalLoadStandardPunch() throws NXException, RemoteException
NXException
RemoteException
double userDefinedPunchPenetration() throws NXException, RemoteException
NXException
RemoteException
void setUserDefinedPunchPenetration(double userDefinedPunchPenetration) throws NXException, RemoteException
userDefinedPunchPenetration
- Indicates the punch penetration value for pierce designNXException
RemoteException
String normalPunchLength() throws NXException, RemoteException
NXException
RemoteException
void setNormalPunchLength(String normalPunchLength) throws NXException, RemoteException
normalPunchLength
- Indicates the punch length for normal pierce designNXException
RemoteException
Expression userDefinedPunchStart() throws NXException, RemoteException
NXException
RemoteException
Expression userDefinedPunchEnd() throws NXException, RemoteException
NXException
RemoteException
boolean punchPocketToggleForPP() throws NXException, RemoteException
NXException
RemoteException
void setPunchPocketToggleForPP(boolean punchPocketToggleForPP) throws NXException, RemoteException
punchPocketToggleForPP
- Indicates whether to create punch pocket in punch plateNXException
RemoteException
PiercingInsertBuilder.PunchPocketTypeItemsPP punchPocketTypeInPP() throws NXException, RemoteException
NXException
RemoteException
void setPunchPocketTypeInPP(PiercingInsertBuilder.PunchPocketTypeItemsPP punchPocketTypeInPP) throws NXException, RemoteException
punchPocketTypeInPP
- Indicates the type of punch pocket in punch plateNXException
RemoteException
double punchPocketClearanceForPP() throws NXException, RemoteException
NXException
RemoteException
void setPunchPocketClearanceForPP(double punchPocketClearanceForPP) throws NXException, RemoteException
punchPocketClearanceForPP
- Indicates the clearance value of punch pocket in punch plateNXException
RemoteException
boolean punchPocketToggleForBP() throws NXException, RemoteException
NXException
RemoteException
void setPunchPocketToggleForBP(boolean punchPocketToggleForBP) throws NXException, RemoteException
punchPocketToggleForBP
- Indicates whether to create punch pocket in backing plateNXException
RemoteException
PiercingInsertBuilder.PunchPocketTypeItemsBP punchPocketTypeInBP() throws NXException, RemoteException
NXException
RemoteException
void setPunchPocketTypeInBP(PiercingInsertBuilder.PunchPocketTypeItemsBP punchPocketTypeInBP) throws NXException, RemoteException
punchPocketTypeInBP
- Indicates the type of punch pocket in backing plateNXException
RemoteException
double punchPocketClearanceForBP() throws NXException, RemoteException
NXException
RemoteException
void setPunchPocketClearanceForBP(double punchPocketClearanceForBP) throws NXException, RemoteException
punchPocketClearanceForBP
- Indicates the clearance value of punch pocket in backing plateNXException
RemoteException
boolean punchPocketToggleForSP() throws NXException, RemoteException
NXException
RemoteException
void setPunchPocketToggleForSP(boolean punchPocketToggleForSP) throws NXException, RemoteException
punchPocketToggleForSP
- Indicates whether to create punch pocket in stripper plateNXException
RemoteException
PiercingInsertBuilder.PunchPocketTypeItemsSP punchPocketTypeInSP() throws NXException, RemoteException
NXException
RemoteException
void setPunchPocketTypeInSP(PiercingInsertBuilder.PunchPocketTypeItemsSP punchPocketTypeInSP) throws NXException, RemoteException
punchPocketTypeInSP
- Indicates the type of punch pocket in stripper plateNXException
RemoteException
double punchPocketClearanceForSP() throws NXException, RemoteException
NXException
RemoteException
void setPunchPocketClearanceForSP(double punchPocketClearanceForSP) throws NXException, RemoteException
punchPocketClearanceForSP
- Indicates the clearance value of punch pocket in stripper plateNXException
RemoteException
double punchPocketHeightInSP() throws NXException, RemoteException
NXException
RemoteException
void setPunchPocketHeightInSP(double punchPocketHeightInSP) throws NXException, RemoteException
punchPocketHeightInSP
- Indicates the punch pocket height value in the stripper plateNXException
RemoteException
void punchEditOffsetValueTable() throws NXException, RemoteException
NXException
RemoteException
boolean punchSameOffsetValue() throws NXException, RemoteException
NXException
RemoteException
void setPunchSameOffsetValue(boolean punchSameOffsetValue) throws NXException, RemoteException
punchSameOffsetValue
- Indicates the same offset value option of punch designNXException
RemoteException
double punchOffsetValue() throws NXException, RemoteException
NXException
RemoteException
void setPunchOffsetValue(double punchOffsetValue) throws NXException, RemoteException
punchOffsetValue
- Indicates the punch offset valueNXException
RemoteException
SelectBodyList normalSelectPiercePunch() throws NXException, RemoteException
NXException
RemoteException
void normalCreateUdp() throws NXException, RemoteException
NXException
RemoteException
void addStripperInsert() throws NXException, RemoteException
NXException
RemoteException
PiercingInsertBuilder.NormalClearanceOptionType normalClearanceOption() throws NXException, RemoteException
NXException
RemoteException
void setNormalClearanceOption(PiercingInsertBuilder.NormalClearanceOptionType normalClearanceOption) throws NXException, RemoteException
normalClearanceOption
- Indicates the clearance option for normal pierce designNXException
RemoteException
double normalClearance() throws NXException, RemoteException
NXException
RemoteException
void setNormalClearance(double normalClearance) throws NXException, RemoteException
normalClearance
- Indicates the clearance value for normal pierce designNXException
RemoteException
PiercingInsertBuilder.NormalOffsetSideType normalOffsetSide() throws NXException, RemoteException
NXException
RemoteException
void setNormalOffsetSide(PiercingInsertBuilder.NormalOffsetSideType normalOffsetSide) throws NXException, RemoteException
normalOffsetSide
- Indicates the offset side option for normal pierce designNXException
RemoteException
boolean normalRenameDialog() throws NXException, RemoteException
NXException
RemoteException
void setNormalRenameDialog(boolean normalRenameDialog) throws NXException, RemoteException
normalRenameDialog
- Indicates the rename dialog option for normal pierce designNXException
RemoteException
boolean normalOnePunchToggle() throws NXException, RemoteException
NXException
RemoteException
void setNormalOnePunchToggle(boolean normalOnePunchToggle) throws NXException, RemoteException
normalOnePunchToggle
- Indicates the one punch option for normal pierce designNXException
RemoteException
boolean conceptDesign() throws NXException, RemoteException
NXException
RemoteException
void setConceptDesign(boolean conceptDesign) throws NXException, RemoteException
conceptDesign
- Indicates whether it is a concept designNXException
RemoteException
boolean settingWithoutFalseBody() throws NXException, RemoteException
NXException
RemoteException
void setSettingWithoutFalseBody(boolean settingWithoutFalseBody) throws NXException, RemoteException
settingWithoutFalseBody
- Indicates whether to create false bodyNXException
RemoteException
void updatePosition() throws NXException, RemoteException
NXException
RemoteException
SelectBodyList selectAssociationScrap() throws NXException, RemoteException
NXException
RemoteException
SelectBodyList selectAssociationInsert() throws NXException, RemoteException
NXException
RemoteException
SelectFaceList selectScrapOrInsert() throws NXException, RemoteException
NXException
RemoteException
PiercingInsertBuilder.AssociationToolType associationTool() throws NXException, RemoteException
NXException
RemoteException
void setAssociationTool(PiercingInsertBuilder.AssociationToolType associationTool) throws NXException, RemoteException
associationTool
- Indicates the association tool typeNXException
RemoteException
void linkButton() throws NXException, RemoteException
NXException
RemoteException
String parentPartName() throws NXException, RemoteException
NXException
RemoteException
void setParentPartName(String parentPart) throws NXException, RemoteException
parentPart
- Specifies the parent part nameNXException
RemoteException
String newPartNames() throws NXException, RemoteException
NXException
RemoteException
void setNewPartNames(String newPartNames) throws NXException, RemoteException
newPartNames
- Specifies the new component namesNXException
RemoteException
PiercingInsertBuilder.InsertPosition position() throws NXException, RemoteException
NXException
RemoteException
void setPosition(PiercingInsertBuilder.InsertPosition position) throws NXException, RemoteException
position
- NXException
RemoteException
Copyright 2011 Siemens Product Lifecycle Management Software Inc. All Rights Reserved.