Skip navigation links
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z _ 

K

k() - Method in interface nxopen.cam.InspectionMeasurePointBuilder
Returns the K direction at measured point
License requirements: None.
K - Static variable in class nxopen.cam.TurnToolBuilder.HolderStyles
K-Style
k1 - Variable in class nxopen.uf.UFCurve.Conic
 
k1 - Variable in class nxopen.uf.UFEval.Hyperbola
 
k1 - Variable in class nxopen.uf.UFEval.Parabola
 
k1Coefficient() - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder
Returns the expression containing the value for the k1 coefficient used in blind volume checking.
k2 - Variable in class nxopen.uf.UFCurve.Conic
 
k2 - Variable in class nxopen.uf.UFEval.Hyperbola
 
k2Coefficient() - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder
Returns the expression containing the value for the k2 coefficient used in blind volume checking.
kbyMaterial() - Method in interface nxopen.tooling.DirectUnfoldBuilder
Deprecated.
Deprecated in NX10.0.0. This functionality is no longer supported.
KEEP - Static variable in class nxopen.cae.CompanionResultBuilder.CompanionResultDisposition
The Companion Result Object will be keep when primary results are deleted so that when the primary results are later regenerated these companion results will again be available.
KEEP - Static variable in class nxopen.facet.BridgeFacetBodyBuilder.Input
Keep the input facet body after builder committing
KEEP - Static variable in class nxopen.facet.MergeFacetBodyBuilder.Input
Keep the input facet body after builder committing
KEEP - Static variable in class nxopen.facet.SewFacetBodyBuilder.Input
Keep the input facet body after builder committing
KEEP - Static variable in class nxopen.features.StudioSplineBuilderEx.InputCurveOptions
Keep original curve
KEEP - Static variable in class nxopen.features.subdivision.ExtractCagePolylineBuilder.InputCurveOption
Keep input curves as they are
KEEP - Static variable in class nxopen.geometricutilities.BooleanRegionSelect.KeepRemoveOption
Selected region will be kept.
KEEP - Static variable in class nxopen.SketchAssociativeTrimBuilder.TrimOption
Selected region will be kept.
KEEP - Static variable in class nxopen.tooling.BlendCurve3DBuilder.InputCurvesOption
Keep input curves
KEEP - Static variable in class nxopen.tooling.EnlargeSurfaceBuilder.KeepDiscardOption
selected region will be kept.
KEEP - Static variable in class nxopen.tooling.TrimRegionBuilder.RegionOption
selected region will be kept.
KEEP_AND_REMOVE - Static variable in class nxopen.geometricutilities.BooleanRegionSelect.SelectOption
Keep and remove regions
KEEP_ANGLE - Static variable in class nxopen.features.StyledSweepBuilder.SectionOrientationOptions
Keep Angle
KEEP_AS_UNMAPPED - Static variable in class nxopen.cae.AssyFEModel.MappedComponentRemovalType
keep unmapped
KEEP_ASSEMBLY_CONSTRAINTS - Static variable in class nxopen.cam.NcmctPartMountingBuilder.PositioningTypes
Keep Assembly Constraints
KEEP_BOXAND_REGION - Static variable in class nxopen.tooling.TrimSolidBuilder.TrimSolidAction
Action to keep box and region.
KEEP_CONTINUITY - Static variable in class nxopen.features.StudioXformBuilder.AdvancedMethodType
Deprecated.
Keep continuity
KEEP_CONTINUITY - Static variable in class nxopen.features.StudioXformBuilderEx.AdvancedMethodType
Deprecated.
Keep continuity, it is deprecated in NX85 release
KEEP_EXISTING - Static variable in class nxopen.tooling.MWMoldedPartValidationBuilder.CalculateOption
calculate and keep existing properties on the faces
KEEP_EXPRESSION - Static variable in class nxopen.annotations.DrivingValueBuilder.DrivingExpressionMode
 
KEEP_EXPRESSION - Static variable in class nxopen.SketchDimensionBuilder.ExpOption
keep expression, adjust geometry
KEEP_HIGH_LABEL - Static variable in class nxopen.cae.modelcheck.DuplicateElementsCheckBuilder.DeletePreference
Keep the elements with higher labels
KEEP_HIGH_LABEL - Static variable in class nxopen.cae.modelcheck.DuplicateNodesCheckBuilder.MergePreference
Keep the nodes with higher labels
KEEP_LOW_LABEL - Static variable in class nxopen.cae.modelcheck.DuplicateElementsCheckBuilder.DeletePreference
Keep the elements with lower labels
KEEP_LOW_LABEL - Static variable in class nxopen.cae.modelcheck.DuplicateNodesCheckBuilder.MergePreference
Keep the nodes with lower labels
KEEP_OR_REMOVE - Static variable in class nxopen.geometricutilities.BooleanRegionSelect.SelectOption
Keep or remove regions
KEEP_ORIGIN - Static variable in class nxopen.tooling.ScrapDesignBuilder.ScrapDefPosition
Scrap will be created in the original plane
KEEP_ORIGINAL - Static variable in class nxopen.cam.ToolPathTiltTilting.ManualTiltTypes
 
KEEP_ORIGINAL - Static variable in class nxopen.geometricutilities.AlongSpineBuilder.RetainSpineOption
Keeps the original profile as it is during edit of pre NX3 parms
KEEP_ORIGINAL - Static variable in class nxopen.geometricutilities.LawBuilder.RetainLawCurveOption
Keeps the original profile as it is during edit pre NX3 parms
KEEP_PARAMETERIZATION - Static variable in class nxopen.geometricutilities.CurveFitData.Method
Keep Parameterization
KEEP_PARAMETERIZATION - Static variable in class nxopen.geometricutilities.Rebuild.RebuildTypes
Keep the parameterization
KEEP_PARAMETERIZATION - Static variable in class nxopen.geometricutilities.RefitControlBuilder.RefitControlMethod
Keep parameterization
KEEP_RETAINED_ANNOTATIONS - Static variable in class nxopen.uf.UFDrf.RetainedState
 
KEEP_SEATED - Static variable in class nxopen.HumanData.InverseKinematicsBalanceType
Indicate human is in a seated position and thus supported by the lower torso
KEEP_SELECTED - Static variable in class nxopen.cae.modelcheck.DuplicateElementsCheckBuilder.DeletePreference
Keep the elements specified in the element list DuplicateElementsCheckBuilder.preferenceElements() and nxopen.cae.modelcheck.DuplicateElementsCheckBuilder#setPreferenceElements
KEEP_SELECTED - Static variable in class nxopen.cae.modelcheck.DuplicateNodesCheckBuilder.MergePreference
Keep the nodes specified in the node list DuplicateNodesCheckBuilder.selectPreferenceNodesList()
KEEP_SOURCE_BIAS - Static variable in class nxopen.cae.ManualMorphBuilder.MapMethod
 
KEEP_TANGENT_POINT - Static variable in class nxopen.cam.BoundaryTurnMemberCorner.CornerType
 
keepAllContinuity() - Method in interface nxopen.features.StudioXformBuilder
Deprecated.
Deprecated in NX8.5.0. Use StudioXformBuilderEx instead.
keepAllContinuity() - Method in interface nxopen.features.StudioXformBuilderEx
Returns a value indicating whether to keep all continuity
License requirements: None.
keepBaseLength() - Method in interface nxopen.features.GlobalShapingBuilder
Returns the equal arc length toggle
License requirements: None.
keepCircuit() - Method in interface nxopen.tooling.SpecifyCircuitBuilder
Returns the option whether to keep the circuit displayed body.
keepCoordSystem() - Method in interface nxopen.features.shipdesign.CustomBracketBuilder
Returns the toggle which allows re-use of the previous coordinate system
License requirements: None.
keepCoordSystem() - Method in interface nxopen.features.shipdesign.ShipCutoutBuilder
Returns the keep coordinate system A toggle used to remember the selected object on apply.
keepCoordSystem() - Method in interface nxopen.features.shipdesign.WeldCutBuilder
Returns the keep coordinate system.
keepFace() - Method in interface nxopen.features.shipdesign.ProfileBuilder
Returns the toggle which allows re-use of the selected faces
License requirements: None.
keepFreeMeshes() - Method in interface nxopen.cae.MappedMeshBuilder
Returns the keep free meshes option
License requirements: None.
keepGuide() - Method in interface nxopen.features.shipdesign.ProfileBuilder
Returns the toggle which allows re-use of the selected edges or curves
License requirements: None.
keepHeelPoint() - Method in interface nxopen.features.shipdesign.CustomBracketBuilder
Returns the toggle which allows re-use of the previous heel point
License requirements: None.
keepImprintedEdges() - Method in interface nxopen.features.SplitBodyBuilder
Returns the keep imprinted edges option
License requirements: None.
keepInvalidElems() - Method in interface nxopen.cae.LaminateExtrudeSetupBuilder
Returns the option to keep invalid extruded elements
License requirements: None.
keepNodesColor - Variable in class nxopen.cae.modelcheck.DuplicateNodesCheckBuilder.DisplaySettings
The kept nodes display color
keepOppositeSurface() - Method in interface nxopen.features.SnipSurfaceBuilder
Returns a value indicating whether to keep the opposite surface.
keepOriginal() - Method in interface nxopen.features.UnsewBuilder
Returns the apply to copy of body option
License requirements: None.
keepOriginalDesignElement() - Method in interface nxopen.assemblies.DesignElementBuilder
Returns the option determines whether to keep the original design element in the subset during save as
License requirements: None.
keepOrthogonal() - Method in interface nxopen.features.MoveCurveBuilder
Returns a value that indicates whether keep orthogonal is enabled
License requirements: None.
keepOrthogonal() - Method in interface nxopen.features.OffsetMoveCurveBuilder
Returns a value that indicates whether keep orthogonal is enabled
License requirements: None.
keepOrthogonal() - Method in interface nxopen.features.ResizeCurveBuilder
Returns a value that indicates whether keep orthogonal is enabled
License requirements: None.
keepPlacementPlane() - Method in interface nxopen.features.shipdesign.CustomBracketBuilder
Returns the toggle which allows re-use of the previous placement plane
License requirements: None.
keepRadFixed() - Method in interface nxopen.tooling.DirectUnbendBuilder
Returns the keep radius fixed.
keepRadiusFixed() - Method in interface nxopen.features.sheetmetal.ResizeBendAngleBuilder
Returns the flag indicationg to keep radius fixed
License requirements: None.
keepRadiusFixed() - Method in interface nxopen.tooling.BendOperationBuilder
Returns the keep radius fixed.
keepReferencePlane() - Method in interface nxopen.features.shipdesign.CustomBracketBuilder
Returns the toggle which allows re-use of the previous reference plane
License requirements: None.
keepRemoveTargetMethod() - Method in interface nxopen.geometricutilities.BooleanRegionSelect
Returns the boolean region to keep/remove method
License requirements: None.
keepRemoveToolMethod() - Method in interface nxopen.geometricutilities.BooleanRegionSelect
Returns the boolean region to keep/remove method
License requirements: None.
keepReverseDirection() - Method in interface nxopen.features.shipdesign.CustomBracketBuilder
Returns the toggle which allows re-use of the previous flip direction toggle
License requirements: None.
keepReverseDirection1() - Method in interface nxopen.features.shipdesign.ShipCutoutBuilder
Returns the toggle which allows re-use of the previous reverse direction toggle.
keepReverseDirection2() - Method in interface nxopen.features.shipdesign.ShipCutoutBuilder
Returns the toggle which allows re-use of the previous reverse direction toggle.
keepReverseGuideOffset() - Method in interface nxopen.features.shipdesign.SteelVentHolesBuilder
Returns the keep reverse guide offset A toggle used to remember the reverse guide value on apply.
keepSectionGuide() - Method in interface nxopen.features.shipdesign.SteelVentHolesBuilder
Returns the keep section guide A toggle used to remember the selected object(s) on apply.
keepSelectCSYSFace() - Method in interface nxopen.features.shipdesign.ShipCutoutBuilder
Returns the keep select csys face A toggle used to remember the selected object on apply.
keepSelectCSYSFace() - Method in interface nxopen.features.shipdesign.WeldCutBuilder
Returns the keep select target face.
keepSelectEndTrim() - Method in interface nxopen.features.shipdesign.SteelVentHolesBuilder
Returns the keep select end trim A toggle used to remember the selected object on apply.
keepSelectFace() - Method in interface nxopen.features.shipdesign.SteelCollarPlateBuilder
Returns the keep select face.
keepSelectGuideCurve() - Method in interface nxopen.features.shipdesign.WeldCutBuilder
Returns the keep select guide curve.
keepSelectLine1() - Method in interface nxopen.features.shipdesign.ShipCutoutBuilder
Returns the keep select line1 A toggle used to remember the selected object on apply.
keepSelectLine2() - Method in interface nxopen.features.shipdesign.ShipCutoutBuilder
Returns the keep select line2 A toggle used to remember the selected object on apply.
keepSelectProfileBody() - Method in interface nxopen.features.shipdesign.SteelCollarPlateBuilder
Returns the keep select profile body.
keepSelectStartTrim() - Method in interface nxopen.features.shipdesign.SteelVentHolesBuilder
Returns the keep select start trim A toggle used to remember the selected object on apply.
keepSelectTargetFace() - Method in interface nxopen.features.shipdesign.ShipCutoutBuilder
Returns the keep select target face A toggle used to remember the selected object on apply.
keepSelectTargetFace() - Method in interface nxopen.features.shipdesign.SteelVentHolesBuilder
Returns the keep select target face A toggle used to remember the selected object(s) on apply.
keepSelectTargetFace() - Method in interface nxopen.features.shipdesign.WeldCutBuilder
Returns the keep select target face.
keepSelectTrimFace() - Method in interface nxopen.features.shipdesign.CustomBracketBuilder
Returns the keep select trim face A toggle used to remember the selected object(s) on apply.
keepSheet() - Method in interface nxopen.geometricutilities.MatchSurfaceBuilder
Returns the option to keep original sheet
License requirements: None.
keepSheet() - Method in interface nxopen.tooling.AssignPatchBuilder
Returns the flag indicating whether to Keep the sheet body or just delete it when deleting a patch surface.
keepSize() - Method in interface nxopen.tooling.ElectrodeBlankBuilder
Returns the option to keep size of the blank or not.
keepSize() - Method in interface nxopen.tooling.ElectrodeDeleteBuilder
Returns the option to keep blank size after deleting sparking solid.
keepTangent() - Method in interface nxopen.features.MoveCurveBuilder
Returns a value that indicates which keep tangent support is selected
License requirements: None.
keepTangent() - Method in interface nxopen.features.OffsetMoveCurveBuilder
Returns a value that indicates which keep tangent support is selected
License requirements: None.
keepTargets() - Method in interface nxopen.features.EmbossBodyBuilder
Returns the copy targets flag
License requirements: None.
keepTools() - Method in interface nxopen.features.EmbossBodyBuilder
Returns the copy tools flag
License requirements: None.
keepTransientMeshes(int) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
Set the flag for keeping the transient meshes.
keepWallThickness() - Method in interface nxopen.features.StepBuilder
Returns the keep wall thickness
License requirements: None.
keepZValueInSameMSet() - Method in interface nxopen.tooling.ElectrodeBlankBuilder
Returns the option to specify whether to keep the Z values of all blanks in the current machine set CSYS.
KernelVersion() - Constructor for class nxopen.uf.UFPs.KernelVersion
 
KernelVersion(int, int, int, int, int, int, int, int, int) - Constructor for class nxopen.uf.UFPs.KernelVersion
 
key - Variable in class nxopen.uf.UFParam.IndexAttribute
 
KEY_IN - Static variable in class nxopen.cae.responsesimulation.ResponseDomainDefinitionMethod
 
keyboardFocusNotify(UIBlock, boolean) - Method in interface nxopen.blockstyler.BlockDialog.KeyboardFocusNotify
Keyboard focus notify callback.
KEYIN - Static variable in class nxopen.cae.DurabilityEventFatigueSettingsBuilder.MaximumAlternatingStressEnum
Keyin
keyway(Keyway) - Method in interface nxopen.die.DieCollection
Creates a keyway feature builder KeywayBuilder .
Keyway - Interface in nxopen.die
Represents a keyway feature
To create or edit an instance of this class, use KeywayBuilder

Created in NX6.0.0
KeywayBuilder - Interface in nxopen.die
Represents a KeywayBuilder builder
To create a new instance of this class, use DieCollection.keyway(nxopen.die.Keyway)
Default values.
KeywayBuilder.LocationType - Class in nxopen.die
Keyway location direction relative to the die centerline coordinate system
KeywayBuilder.Types - Class in nxopen.die
Keyway runoff types
KeywayChildBuilder - Interface in nxopen.die
Represents a Die Keyway Child sub feature.
KeywayChildBuilder.LocationOption - Class in nxopen.die
Settings for the location of the keyway.
KeywayChildBuilder.RunoffTypeOption - Class in nxopen.die
Settings for the runoff type of the keyway.
KeywayChildBuilder.SlotAttributesData - Class in nxopen.die
This class holds the data returned from KeywayChildBuilder.getSlotAttributes()
keywayParent() - Method in interface nxopen.die.DrawDiePunchBuilder
Returns the keyway parent builder of the draw die punch.
KeywayParentBuilder - Interface in nxopen.die
Represents a Die Keyway Parent sub feature.
KeywayParentBuilder.RunoffTypeOption - Class in nxopen.die
Settings for the runoff type of the keyway.
KeywayParentBuilder.SlotAttributesData - Class in nxopen.die
This class holds the data returned from KeywayParentBuilder.getSlotAttributes()
Keyword() - Constructor for class nxopen.uf.UFGdt.Keyword
 
Keyword(int) - Constructor for class nxopen.uf.UFGdt.Keyword
 
keywords - Variable in class nxopen.uf.UFGdt.AskDatumKeywordsData
 
kf() - Method in interface nxopen.UFSession
 
KF_BOUND_BOX - Static variable in class nxopen.tooling.BackingPadBuilder.Types
 
KF_BOX - Static variable in class nxopen.tooling.WorkpieceBuilder.MethodType
Create block by define the kf box
KF_CHECKING - Static variable in class nxopen.RuleManager.LicenseType
 
KF_CLASS - Static variable in class nxopen.Validation.InputType
Input rules are in a KF class
KF_FEATURE - Static variable in class nxopen.RuleManager.LicenseType
 
KF_INTEROP - Static variable in class nxopen.RuleManager.LicenseType
 
KF_MISC1DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
 
KF_MISC1FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
 
KF_MISC2DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
 
KF_MISC2FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
 
KF_MISC3DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
 
KF_MISC3FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
 
KF_MISC4DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
 
KF_MISC4FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
 
KF_MISC5DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
 
KF_MISC5FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
 
KF_NEW_GEOM - Static variable in class nxopen.RuleManager.LicenseType
 
kfactor() - Method in interface nxopen.tooling.DirectUnfoldBuilder
Deprecated.
Deprecated in NX10.0.0. Use Tooling.DefineNeutralFactorBuilder#neutralFactor instead.
kFactor - Variable in class nxopen.uf.UFSf.AskDursolNxData
 
KFATTRIBUTE - Static variable in class nxopen.optimization.DesignStudyBuilder.DesignStudyAttributeType
KF attribute type
KFATTRIBUTE - Static variable in class nxopen.optimization.OptimizationBuilder.OptimizationAttributeType
KF attribute
kfName - Variable in class nxopen.uf.UFPd.ProductAttribute
 
kfName - Variable in class nxopen.uf.UFPd.ProductAttribute2
 
KFObject - Interface in nxopen
Represents an KF object in the part.
kfUgmgr() - Method in interface nxopen.UFSession
 
KG - Static variable in class nxopen.HumanData.WeightUnitType
Indicate kg for weight
KG_MILLI - Static variable in class nxopen.cae.SolidPropertyCheckBuilder.UserUnit
mass = kg, cg = mm, volume = mm^3 mmoi = kg-mm^2
KG_PER_CU_METER - Static variable in class nxopen.preferences.PartModeling.DensityUnitType
Unit is kg per cubic meter
KHZ - Static variable in class nxopen.cae.LaminateSineEventBuilder.AdditionalFrequeciesUnitsEnum
 
KI_JOURNAL_NOT_OPEN - Static variable in class nxopen.uf.UFConstants
 
KILOGRAM_METER - Static variable in class nxopen.MeasureBodies.AnalysisUnit
 
KILOGRAM_MILLIMETER - Static variable in class nxopen.MeasureBodies.AnalysisUnit
 
KILOGRAMS_METERS - Static variable in class nxopen.uf.UFModl.DensityUnits
 
KILOGRAMS_PER_CUBIC_METERS - Static variable in class nxopen.geometricanalysis.SolidDensity.UnitsType
Kilograms/Cubic Meters
KIM_DEGOF_LINEAR - Static variable in class nxopen.uf.UFSim.KimDegOfTypes
 
KIM_DEGOF_ROTARY - Static variable in class nxopen.uf.UFSim.KimDegOfTypes
 
KIM_DEGOF_TYPE_NONE - Static variable in class nxopen.uf.UFSim.KimDegOfTypes
 
KINEMATIC_MODEL - Static variable in class nxopen.sim.SimDebugBuilder.DumpType
Dump Kinematic Model
KINEMATIC_MODEL - Static variable in class nxopen.sim.SimDebugBuilder.TraceType
Trace Kinematic Model
KINEMATIC_SOLVER - Static variable in class nxopen.uf.UFMotion.Solver
 
KinematicAxisBuilder - Interface in nxopen.sim
Represents the SimKimAxisBuilder class object
Use the KinematicConfigurator class to create a KinematicAxisBuilder object.
KinematicAxisBuilder.AxisDirectionType - Class in nxopen.sim
The axis direction type
KinematicAxisBuilder.AxisMotionType - Class in nxopen.sim
The axis motions type
KinematicChain - Interface in nxopen.sim
This class is used for add kinematic chain to the list.
KinematicChain.CoordinatePlaneTypes - Class in nxopen.sim
Represents the coordinate plane type
KinematicChain.Types - Class in nxopen.sim
Represents the kinematic chain type
KinematicChainConfiguration - Interface in nxopen.sim
This class is used for define kinematic chains.
KinematicChainList - Interface in nxopen.sim
Represents a list of objects.
KinematicComponent - Interface in nxopen.sim
Represents the KinematicComponent class object
Use the KinematicConfigurator class to create a KinematicComponent object.
KinematicComponentBuilder - Interface in nxopen.sim
Represents the KinamaticComponentBuilder class object
To create a new instance of this class, use KinematicComponentCollection.createHeadBaseComponentBuilder(nxopen.sim.KinematicComponent)

Created in NX7.5.0
KinematicComponentBuilder.RegisterTypes - Class in nxopen.sim
The register types
KinematicComponentBuilder.SystemClass - Class in nxopen.sim
The SIM KIM system classes
KinematicComponentBuilder.WorkPositionAngleTypes - Class in nxopen.sim
The Working Position Angle type
KinematicComponentCollection - Interface in nxopen.sim
Represents the SimKimComponent Collection
To obtain an instance of this class, refer to KinematicConfigurator

Created in NX7.5.0
kinematicConfigurator() - Method in interface nxopen.Part
Returns the KinematicConfigurator instance of the work part
License requirements: None.
KinematicConfigurator - Interface in nxopen.sim
Represents the ISV base class object
To obtain an instance of this class, use Part.kinematicConfigurator()

Created in NX7.5.0
KinematicConfigurator.FindAxisData - Class in nxopen.sim
This class holds the data returned from KinematicConfigurator.findAxis(java.lang.String)
KinematicConfigurator.UniteTypes - Class in nxopen.sim
The unite types for spinning geometries
KinematicJunction - Interface in nxopen.sim
Represents the KinematicJunction class object
Use the KinematicConfigurator class to create a SimKimJunction object.
KinematicJunctionBuilder - Interface in nxopen.sim
Represents the SimKimJunctionBuilder class object
Use the KinematicConfigurator class to create a KinematicJunctionBuilder object.
KinematicJunctionBuilder.SystemClass - Class in nxopen.sim
The junction system classes
KinematicJunctionBuilderList - Interface in nxopen.sim
Represents a list of objects.
kinematicModel() - Method in interface nxopen.sim.SimDebugBuilder
Returns the kinematic model
License requirements: None.
kinematicModel() - Method in interface nxopen.tooling.MotionSimulationBuilder
Returns the kinematic model to specify whose parameters need to be modified.
KINEMATICS - Static variable in class nxopen.motion.MotionEnvironment.Analysis
Kinematics analysis type
KinematicSinumerikCaBuilder - Interface in nxopen.sim
This class is used for edit sinumerik collision avoidance properties.
KinematicSinumerikCaBuilder.PlcInitStateTypes - Class in nxopen.sim
The init state types
KinematicSinumerikCaBuilder.PlcUsageTypes - Class in nxopen.sim
The usage types
kinematicSolutionTolerance() - Method in interface nxopen.motion.LmsSolverProperty
Returns the kinematic solution tolerance
License requirements: None.
KINETIC_ENERGY - Static variable in class nxopen.cae.Result.Quantity
 
KINETIC_ENERGY_DENSITY - Static variable in class nxopen.cae.Result.Quantity
 
KINETIC_ENERGY_PERCENT - Static variable in class nxopen.cae.Result.Quantity
 
KNOT - Static variable in class nxopen.geometricanalysis.CurveAnalysisDisplay.ShowFlagType
Deprecated.
show knot
KNOT - Static variable in class nxopen.geometricanalysis.SurfaceAnalysisDisplay.ShowFlagType
show knot
KNOT - Static variable in class nxopen.InferSnapType.SnapType
Snap point knot
knotDisplayState() - Method in interface nxopen.DisplayModification
Returns the flag for knot display.
knotFixup - Variable in class nxopen.uf.UFModlGeneral.Cre2dtrimBsurfData
 
knotFixup - Variable in class nxopen.uf.UFModlGeneral.CreateBsEdgesData
 
knotFixup - Variable in class nxopen.uf.UFModlGeneral.CreateBsurfData
 
knotFixup - Variable in class nxopen.uf.UFModlGeneral.CreateSplineData
 
knotFixup - Variable in class nxopen.uf.UFModlGeneral.CreTrimBsurfData
 
knotPoint() - Method in interface nxopen.features.DivideCurveBuilder
Returns the knot point
License requirements: None.
knotPointMethod() - Method in interface nxopen.features.DivideCurveBuilder
Returns the knot point method
License requirements: None.
knotPointNumber() - Method in interface nxopen.features.DivideCurveBuilder
Returns the knot point number
License requirements: None.
KNOTS - Static variable in class nxopen.features.PointSetBuilder.SplinePointsType
Points will be created at spline knot points.
knots - Variable in class nxopen.uf.UFCurve.Spline
 
knots - Variable in class nxopen.uf.UFEval.AskSplineKnotsData
 
knotsU - Variable in class nxopen.uf.UFModl.Bsurface
 
knotsV - Variable in class nxopen.uf.UFModl.Bsurface
 
knowledgeFusion() - Method in interface nxopen.preferences.SessionPreferences
Returns object for doing Rule preferences settings applicable to entire session .
knowledgeFusionClassName() - Method in interface nxopen.annotations.PmiAttributeBuilder
Returns the knowledge fusion class name file, the default class is UG provided pmi KF class
License requirements: None.
knuckledProfile() - Method in interface nxopen.features.shipdesign.ProfileListBuilder
Returns the knuckled profile
License requirements: None.
KnuckledProfiles - Interface in nxopen.features.shipdesign
Represents a knuckled profiles manufacturing preparation feature
To create or edit an instance of this class, use KnuckledProfilesBuilder

Created in NX5.0.3
KnuckledProfilesBuilder - Interface in nxopen.features.shipdesign
Represents a KnuckledProfiles builder
To create a new instance of this class, use ShipCollection.createKnuckledProfilesBuilder(nxopen.features.shipdesign.KnuckledProfiles)

Created in NX5.0.3
knuckleOption() - Method in interface nxopen.features.shipdesign.StiffenerBuilder
Returns the stiffener knuckle option
License requirements: None.
knuckleRatio() - Method in interface nxopen.features.shipdesign.PlateStockBuilder
Returns the knuckle ratio, which is used to calcuate the knuckle bend radius by multiplying the plate thickness by the ratio.
knuckleSmoothAngle() - Method in interface nxopen.features.shipdesign.PlateStockBuilder
Returns the knuckle smooth angle, which is used to determine whether a edge is knuckle edge or not.
KOREAN - Static variable in class nxopen.features.vehicledesign.PedestrianProtectionBuilder.StandardType
Korean standard
krxFile - Variable in class nxopen.tooling.AddReusableFeatureCollection.InputData
KRX file of reusable feature template
kt1() - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder
Returns the kt1.
kt2() - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder
Returns the kt2.
kt3() - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder
Returns the kt3.
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z _ 
Skip navigation links

Copyright 2011 Siemens Product Lifecycle Management Software Inc. All Rights Reserved.